From dbe43a62762d2a6430cf6ed65d3459ce1e8ed46c Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 22 Apr 2012 20:58:51 -0700 Subject: hwmon: (ntc_thermistor) Optimize and fix build warning The following build warning is seen in some configurations: drivers/hwmon/ntc_thermistor.c: In function 'ntc_show_temp': drivers/hwmon/ntc_thermistor.c:293: warning: 'temp' may be used uninitialized in this function Fix the problem by re-arranging the code to overload return values with error codes, and by avoiding error returns whenever possible. Specifically, Simplify lookup_comp() to not return an error. Instead, return i_low == i_high if there is an exact match, or if the ohm value is outside the lookup table range. Modify get_temp_mC() to not return an error. Since it only returns an error after lookup_comp() returned an error, this is quite straightforward after above change. Separate ntc_thermistor_read() into a function to read the resistor value (which can return an error), and the call to get_temp_mC() which doesn't. Call the functions directly from ntc_show_temp(). Code was tested using a test program, comparing the result of the old and new versions of get_temp_mC() for resistor values between 0 and 2,000,000 ohm. As a side effect, this patch reduces code size by approximately 400 bytes on x86_64. Signed-off-by: Guenter Roeck Cc: Donggeun Kim Reviewed-by: Robert Coulson --- drivers/hwmon/ntc_thermistor.c | 164 ++++++++++++++++++++--------------------- 1 file changed, 80 insertions(+), 84 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index b31bf1d3172a..ea163866789a 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -134,8 +134,7 @@ static inline u64 div64_u64_safe(u64 dividend, u64 divisor) return div64_u64(dividend, divisor); } -static unsigned int get_ohm_of_thermistor(struct ntc_data *data, - unsigned int uV) +static int get_ohm_of_thermistor(struct ntc_data *data, unsigned int uV) { struct ntc_thermistor_platform_data *pdata = data->pdata; u64 mV = uV / 1000; @@ -146,12 +145,12 @@ static unsigned int get_ohm_of_thermistor(struct ntc_data *data, if (mV == 0) { if (pdata->connect == NTC_CONNECTED_POSITIVE) - return UINT_MAX; + return INT_MAX; return 0; } if (mV >= pmV) return (pdata->connect == NTC_CONNECTED_POSITIVE) ? - 0 : UINT_MAX; + 0 : INT_MAX; if (pdata->connect == NTC_CONNECTED_POSITIVE && puO == 0) N = div64_u64_safe(pdO * (pmV - mV), mV); @@ -163,113 +162,109 @@ static unsigned int get_ohm_of_thermistor(struct ntc_data *data, else N = div64_u64_safe(pdO * puO * mV, pdO * (pmV - mV) - puO * mV); - return (unsigned int) N; + if (N > INT_MAX) + N = INT_MAX; + return N; } -static int lookup_comp(struct ntc_data *data, - unsigned int ohm, int *i_low, int *i_high) +static void lookup_comp(struct ntc_data *data, unsigned int ohm, + int *i_low, int *i_high) { - int start, end, mid = -1; + int start, end, mid; + + /* + * Handle special cases: Resistance is higher than or equal to + * resistance in first table entry, or resistance is lower or equal + * to resistance in last table entry. + * In these cases, return i_low == i_high, either pointing to the + * beginning or to the end of the table depending on the condition. + */ + if (ohm >= data->comp[0].ohm) { + *i_low = 0; + *i_high = 0; + return; + } + if (ohm <= data->comp[data->n_comp - 1].ohm) { + *i_low = data->n_comp - 1; + *i_high = data->n_comp - 1; + return; + } /* Do a binary search on compensation table */ start = 0; end = data->n_comp; - - while (end > start) { + while (start < end) { mid = start + (end - start) / 2; - if (data->comp[mid].ohm < ohm) + /* + * start <= mid < end + * data->comp[start].ohm > ohm >= data->comp[end].ohm + * + * We could check for "ohm == data->comp[mid].ohm" here, but + * that is a quite unlikely condition, and we would have to + * check again after updating start. Check it at the end instead + * for simplicity. + */ + if (ohm >= data->comp[mid].ohm) { end = mid; - else if (data->comp[mid].ohm > ohm) - start = mid + 1; - else - break; - } - - if (mid == 0) { - if (data->comp[mid].ohm > ohm) { - *i_high = mid; - *i_low = mid + 1; - return 0; } else { - *i_low = mid; - *i_high = -1; - return -EINVAL; - } - } - if (mid == (data->n_comp - 1)) { - if (data->comp[mid].ohm <= ohm) { - *i_low = mid; - *i_high = mid - 1; - return 0; - } else { - *i_low = -1; - *i_high = mid; - return -EINVAL; + start = mid + 1; + /* + * ohm >= data->comp[start].ohm might be true here, + * since we set start to mid + 1. In that case, we are + * done. We could keep going, but the condition is quite + * likely to occur, so it is worth checking for it. + */ + if (ohm >= data->comp[start].ohm) + end = start; } + /* + * start <= end + * data->comp[start].ohm >= ohm >= data->comp[end].ohm + */ } - - if (data->comp[mid].ohm <= ohm) { - *i_low = mid; - *i_high = mid - 1; - } else { - *i_low = mid + 1; - *i_high = mid; - } - - return 0; + /* + * start == end + * ohm >= data->comp[end].ohm + */ + *i_low = end; + if (ohm == data->comp[end].ohm) + *i_high = end; + else + *i_high = end - 1; } -static int get_temp_mC(struct ntc_data *data, unsigned int ohm, int *temp) +static int get_temp_mC(struct ntc_data *data, unsigned int ohm) { int low, high; - int ret; + int temp; - ret = lookup_comp(data, ohm, &low, &high); - if (ret) { + lookup_comp(data, ohm, &low, &high); + if (low == high) { /* Unable to use linear approximation */ - if (low != -1) - *temp = data->comp[low].temp_C * 1000; - else if (high != -1) - *temp = data->comp[high].temp_C * 1000; - else - return ret; + temp = data->comp[low].temp_C * 1000; } else { - *temp = data->comp[low].temp_C * 1000 + + temp = data->comp[low].temp_C * 1000 + ((data->comp[high].temp_C - data->comp[low].temp_C) * 1000 * ((int)ohm - (int)data->comp[low].ohm)) / ((int)data->comp[high].ohm - (int)data->comp[low].ohm); } - - return 0; + return temp; } -static int ntc_thermistor_read(struct ntc_data *data, int *temp) +static int ntc_thermistor_get_ohm(struct ntc_data *data) { - int ret; - int read_ohm, read_uV; - unsigned int ohm = 0; - - if (data->pdata->read_ohm) { - read_ohm = data->pdata->read_ohm(); - if (read_ohm < 0) - return read_ohm; - ohm = (unsigned int)read_ohm; - } + int read_uV; + + if (data->pdata->read_ohm) + return data->pdata->read_ohm(); if (data->pdata->read_uV) { read_uV = data->pdata->read_uV(); if (read_uV < 0) return read_uV; - ohm = get_ohm_of_thermistor(data, (unsigned int)read_uV); - } - - ret = get_temp_mC(data, ohm, temp); - if (ret) { - dev_dbg(data->dev, "Sensor reading function not available.\n"); - return ret; + return get_ohm_of_thermistor(data, read_uV); } - - return 0; + return -EINVAL; } static ssize_t ntc_show_name(struct device *dev, @@ -290,12 +285,13 @@ static ssize_t ntc_show_temp(struct device *dev, struct device_attribute *attr, char *buf) { struct ntc_data *data = dev_get_drvdata(dev); - int temp, ret; + int ohm; - ret = ntc_thermistor_read(data, &temp); - if (ret) - return ret; - return sprintf(buf, "%d\n", temp); + ohm = ntc_thermistor_get_ohm(data); + if (ohm < 0) + return ohm; + + return sprintf(buf, "%d\n", get_temp_mC(data, ohm)); } static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, ntc_show_type, NULL, 0); -- cgit v1.2.3