From ee9c4e681ec4f58e42a83cb0c22a0289ade1aacf Mon Sep 17 00:00:00 2001 From: Vladis Dronov Date: Fri, 2 Jun 2017 07:42:09 +0200 Subject: drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl() The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is a user-controlled 'uint32_t' value which is used as a loop count limit. This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'. References: https://bugzilla.redhat.com/show_bug.cgi?id=1437431 Cc: Signed-off-by: Vladis Dronov Reviewed-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c index 7681341fe32b..baf03d4d86d2 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c @@ -1279,6 +1279,9 @@ int vmw_gb_surface_define_ioctl(struct drm_device *dev, void *data, if (req->multisample_count != 0) return -EINVAL; + if (req->mip_levels > DRM_VMW_MAX_MIP_LEVELS) + return -EINVAL; + if (unlikely(vmw_user_surface_size == 0)) vmw_user_surface_size = ttm_round_pot(sizeof(*user_srf)) + 128; -- cgit v1.2.3 From bbd5fefeea59412af4b4a325c2743f53a1d6c417 Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Fri, 2 Jun 2017 07:44:53 +0200 Subject: drm/vmwgfx: Don't create proxy surface for cursor With atomic, the cursor surface is treated like a FB. Creating a proxy surface for cursor doesn't gain us much benefit. This fixes the issue on atomic enabled 2D VMs where the cursor disappears. Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index ef9f3a2a4030..bcb6ddbdf43c 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1498,6 +1498,7 @@ vmw_kms_new_framebuffer(struct vmw_private *dev_priv, */ if (vmw_kms_srf_ok(dev_priv, mode_cmd->width, mode_cmd->height) && dmabuf && only_2d && + mode_cmd->width > 64 && /* Don't create a proxy for cursor */ dev_priv->active_display_unit == vmw_du_screen_target) { ret = vmw_create_dmabuf_proxy(dev_priv->dev, mode_cmd, dmabuf, &surface); -- cgit v1.2.3 From f0c62e9878024300319ba2438adc7b06c6b9c448 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 27 Apr 2017 12:12:08 +0300 Subject: drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve() If vmalloc() fails then we need to a bit of cleanup before returning. Cc: Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU") Signed-off-by: Dan Carpenter Reviewed-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index b6a0806b06bf..a1c68e6a689e 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -368,6 +368,8 @@ static void *vmw_local_fifo_reserve(struct vmw_private *dev_priv, return fifo_state->static_buffer; else { fifo_state->dynamic_buffer = vmalloc(bytes); + if (!fifo_state->dynamic_buffer) + goto out_err; return fifo_state->dynamic_buffer; } } -- cgit v1.2.3 From 07678eca2cf9c9a18584e546c2b2a0d0c9a3150c Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Fri, 2 Jun 2017 07:50:57 +0200 Subject: drm/vmwgfx: Make sure backup_handle is always valid When vmw_gb_surface_define_ioctl() is called with an existing buffer, we end up returning an uninitialized variable in the backup_handle. The fix is to first initialize backup_handle to 0 just to be sure, and second, when a user-provided buffer is found, we will use the req->buffer_handle as the backup_handle. Cc: Reported-by: Murray McAllister Signed-off-by: Sinclair Yeh Reviewed-by: Deepak Rawat --- drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c index baf03d4d86d2..834bb10973a2 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c @@ -1274,7 +1274,7 @@ int vmw_gb_surface_define_ioctl(struct drm_device *dev, void *data, struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; int ret; uint32_t size; - uint32_t backup_handle; + uint32_t backup_handle = 0; if (req->multisample_count != 0) return -EINVAL; @@ -1317,12 +1317,16 @@ int vmw_gb_surface_define_ioctl(struct drm_device *dev, void *data, ret = vmw_user_dmabuf_lookup(tfile, req->buffer_handle, &res->backup, &user_srf->backup_base); - if (ret == 0 && res->backup->base.num_pages * PAGE_SIZE < - res->backup_size) { - DRM_ERROR("Surface backup buffer is too small.\n"); - vmw_dmabuf_unreference(&res->backup); - ret = -EINVAL; - goto out_unlock; + if (ret == 0) { + if (res->backup->base.num_pages * PAGE_SIZE < + res->backup_size) { + DRM_ERROR("Surface backup buffer is too small.\n"); + vmw_dmabuf_unreference(&res->backup); + ret = -EINVAL; + goto out_unlock; + } else { + backup_handle = req->buffer_handle; + } } } else if (req->drm_surface_flags & drm_vmw_surface_flag_create_buffer) ret = vmw_user_dmabuf_alloc(dev_priv, tfile, -- cgit v1.2.3 From 8a309c8a2d0619efe29ec652c163d6b89eff9f9f Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Fri, 2 Jun 2017 07:53:27 +0200 Subject: drm/vmwgfx: Make sure to update STDU when FB is updated When a new FB is bound, we have to send an update command otherwise the new FB may not be shown Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c index bad31bdf09b6..60ace30246cf 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c @@ -1355,6 +1355,11 @@ vmw_stdu_primary_plane_atomic_update(struct drm_plane *plane, DRM_ERROR("Failed to bind surface to STDU.\n"); else crtc->primary->fb = plane->state->fb; + + ret = vmw_stdu_update_st(dev_priv, stdu); + + if (ret) + DRM_ERROR("Failed to update STDU.\n"); } -- cgit v1.2.3 From a1ac633912305168bf432c3d47979d43b16164f8 Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Fri, 2 Jun 2017 07:55:50 +0200 Subject: drm/vmwgfx: Fix large topology crash The previous attempt at this had an issue with with num_clips > 1 because it would always end up using the coordinates of the last clip while using width and height calculated from the bounding box of all the clips. So if the last clip happens to be not at the top-left corner of the bounding box, the CPU blit operation would go out of bounds. The original intent was to coalesce all the clips into one blit, and to do that we need to also track the starting point of the content buffer. Signed-off-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c index 60ace30246cf..50be1f034f9e 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c @@ -56,6 +56,8 @@ enum stdu_content_type { * @right: Right side of bounding box. * @top: Top side of bounding box. * @bottom: Bottom side of bounding box. + * @fb_left: Left side of the framebuffer/content bounding box + * @fb_top: Top of the framebuffer/content bounding box * @buf: DMA buffer when DMA-ing between buffer and screen targets. * @sid: Surface ID when copying between surface and screen targets. */ @@ -63,6 +65,7 @@ struct vmw_stdu_dirty { struct vmw_kms_dirty base; SVGA3dTransferType transfer; s32 left, right, top, bottom; + s32 fb_left, fb_top; u32 pitch; union { struct vmw_dma_buffer *buf; @@ -647,7 +650,7 @@ static void vmw_stdu_dmabuf_fifo_commit(struct vmw_kms_dirty *dirty) * * @dirty: The closure structure. * - * This function calculates the bounding box for all the incoming clips + * This function calculates the bounding box for all the incoming clips. */ static void vmw_stdu_dmabuf_cpu_clip(struct vmw_kms_dirty *dirty) { @@ -656,11 +659,19 @@ static void vmw_stdu_dmabuf_cpu_clip(struct vmw_kms_dirty *dirty) dirty->num_hits = 1; - /* Calculate bounding box */ + /* Calculate destination bounding box */ ddirty->left = min_t(s32, ddirty->left, dirty->unit_x1); ddirty->top = min_t(s32, ddirty->top, dirty->unit_y1); ddirty->right = max_t(s32, ddirty->right, dirty->unit_x2); ddirty->bottom = max_t(s32, ddirty->bottom, dirty->unit_y2); + + /* + * Calculate content bounding box. We only need the top-left + * coordinate because width and height will be the same as the + * destination bounding box above + */ + ddirty->fb_left = min_t(s32, ddirty->fb_left, dirty->fb_x); + ddirty->fb_top = min_t(s32, ddirty->fb_top, dirty->fb_y); } @@ -697,11 +708,11 @@ static void vmw_stdu_dmabuf_cpu_commit(struct vmw_kms_dirty *dirty) /* Assume we are blitting from Host (display_srf) to Guest (dmabuf) */ src_pitch = stdu->display_srf->base_size.width * stdu->cpp; src = ttm_kmap_obj_virtual(&stdu->host_map, ¬_used); - src += dirty->unit_y1 * src_pitch + dirty->unit_x1 * stdu->cpp; + src += ddirty->top * src_pitch + ddirty->left * stdu->cpp; dst_pitch = ddirty->pitch; dst = ttm_kmap_obj_virtual(&stdu->guest_map, ¬_used); - dst += dirty->fb_y * dst_pitch + dirty->fb_x * stdu->cpp; + dst += ddirty->fb_top * dst_pitch + ddirty->fb_left * stdu->cpp; /* Figure out the real direction */ @@ -760,7 +771,7 @@ static void vmw_stdu_dmabuf_cpu_commit(struct vmw_kms_dirty *dirty) } out_cleanup: - ddirty->left = ddirty->top = S32_MAX; + ddirty->left = ddirty->top = ddirty->fb_left = ddirty->fb_top = S32_MAX; ddirty->right = ddirty->bottom = S32_MIN; } @@ -812,6 +823,7 @@ int vmw_kms_stdu_dma(struct vmw_private *dev_priv, SVGA3D_READ_HOST_VRAM; ddirty.left = ddirty.top = S32_MAX; ddirty.right = ddirty.bottom = S32_MIN; + ddirty.fb_left = ddirty.fb_top = S32_MAX; ddirty.pitch = vfb->base.pitches[0]; ddirty.buf = buf; ddirty.base.fifo_commit = vmw_stdu_dmabuf_fifo_commit; -- cgit v1.2.3 From a2e5a3e2f8cc48cc9ed10a919ae582ab0222da80 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 27 May 2017 19:52:30 +0100 Subject: drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds" Trivial fix to spelling mistake in DRM_ERROR error message. Signed-off-by: Colin Ian King Reviewed-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c index 834bb10973a2..6b70bd259953 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c @@ -1498,7 +1498,7 @@ int vmw_surface_gb_priv_define(struct drm_device *dev, dev_priv->stdu_max_height); if (size.width > max_width || size.height > max_height) { - DRM_ERROR("%ux%u\n, exeeds max surface size %ux%u", + DRM_ERROR("%ux%u\n, exceeds max surface size %ux%u", size.width, size.height, max_width, max_height); return -EINVAL; -- cgit v1.2.3 From f470a7740f8c7577df1db5923ec89d890cf32040 Mon Sep 17 00:00:00 2001 From: Sinclair Yeh Date: Wed, 7 Jun 2017 14:24:08 +0200 Subject: drm/vmwgfx: Remove unused legacy cursor functions These function implementations and/or declarations are no longer used now that atomic is enabled. Signed-off-by: Sinclair Yeh Reported-by: Daniel Vetter Reviewed-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 114 ------------------------------------ drivers/gpu/drm/vmwgfx/vmwgfx_kms.h | 15 ----- 2 files changed, 129 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index bcb6ddbdf43c..1d2db5d912b0 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -274,108 +274,6 @@ void vmw_kms_cursor_post_execbuf(struct vmw_private *dev_priv) } - -/** - * vmw_du_cursor_plane_update() - Update cursor image and location - * - * @plane: plane object to update - * @crtc: owning CRTC of @plane - * @fb: framebuffer to flip onto plane - * @crtc_x: x offset of plane on crtc - * @crtc_y: y offset of plane on crtc - * @crtc_w: width of plane rectangle on crtc - * @crtc_h: height of plane rectangle on crtc - * @src_x: Not used - * @src_y: Not used - * @src_w: Not used - * @src_h: Not used - * - * - * RETURNS: - * Zero on success, error code on failure - */ -int vmw_du_cursor_plane_update(struct drm_plane *plane, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - int crtc_x, int crtc_y, - unsigned int crtc_w, - unsigned int crtc_h, - uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h) -{ - struct vmw_private *dev_priv = vmw_priv(crtc->dev); - struct vmw_display_unit *du = vmw_crtc_to_du(crtc); - struct vmw_surface *surface = NULL; - struct vmw_dma_buffer *dmabuf = NULL; - s32 hotspot_x, hotspot_y; - int ret; - - hotspot_x = du->hotspot_x + fb->hot_x; - hotspot_y = du->hotspot_y + fb->hot_y; - - /* A lot of the code assumes this */ - if (crtc_w != 64 || crtc_h != 64) { - ret = -EINVAL; - goto out; - } - - if (vmw_framebuffer_to_vfb(fb)->dmabuf) - dmabuf = vmw_framebuffer_to_vfbd(fb)->buffer; - else - surface = vmw_framebuffer_to_vfbs(fb)->surface; - - if (surface && !surface->snooper.image) { - DRM_ERROR("surface not suitable for cursor\n"); - ret = -EINVAL; - goto out; - } - - /* setup new image */ - ret = 0; - if (surface) { - /* vmw_user_surface_lookup takes one reference */ - du->cursor_surface = surface; - - du->cursor_age = du->cursor_surface->snooper.age; - - ret = vmw_cursor_update_image(dev_priv, surface->snooper.image, - 64, 64, hotspot_x, hotspot_y); - } else if (dmabuf) { - /* vmw_user_surface_lookup takes one reference */ - du->cursor_dmabuf = dmabuf; - - ret = vmw_cursor_update_dmabuf(dev_priv, dmabuf, crtc_w, crtc_h, - hotspot_x, hotspot_y); - } else { - vmw_cursor_update_position(dev_priv, false, 0, 0); - goto out; - } - - if (!ret) { - du->cursor_x = crtc_x + du->set_gui_x; - du->cursor_y = crtc_y + du->set_gui_y; - - vmw_cursor_update_position(dev_priv, true, - du->cursor_x + hotspot_x, - du->cursor_y + hotspot_y); - } - -out: - return ret; -} - - -int vmw_du_cursor_plane_disable(struct drm_plane *plane) -{ - if (plane->fb) { - drm_framebuffer_unreference(plane->fb); - plane->fb = NULL; - } - - return -EINVAL; -} - - void vmw_du_cursor_plane_destroy(struct drm_plane *plane) { vmw_cursor_update_position(plane->dev->dev_private, false, 0, 0); @@ -472,18 +370,6 @@ vmw_du_cursor_plane_prepare_fb(struct drm_plane *plane, } -void -vmw_du_cursor_plane_atomic_disable(struct drm_plane *plane, - struct drm_plane_state *old_state) -{ - struct drm_crtc *crtc = plane->state->crtc ?: old_state->crtc; - struct vmw_private *dev_priv = vmw_priv(crtc->dev); - - drm_atomic_set_fb_for_plane(plane->state, NULL); - vmw_cursor_update_position(dev_priv, false, 0, 0); -} - - void vmw_du_cursor_plane_atomic_update(struct drm_plane *plane, struct drm_plane_state *old_state) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h index 13f2f1d2818a..5f8d678ae675 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h @@ -256,10 +256,6 @@ int vmw_du_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, uint32_t size, struct drm_modeset_acquire_ctx *ctx); -int vmw_du_crtc_cursor_set2(struct drm_crtc *crtc, struct drm_file *file_priv, - uint32_t handle, uint32_t width, uint32_t height, - int32_t hot_x, int32_t hot_y); -int vmw_du_crtc_cursor_move(struct drm_crtc *crtc, int x, int y); int vmw_du_connector_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t val); @@ -339,15 +335,6 @@ void vmw_kms_create_implicit_placement_property(struct vmw_private *dev_priv, /* Universal Plane Helpers */ void vmw_du_primary_plane_destroy(struct drm_plane *plane); void vmw_du_cursor_plane_destroy(struct drm_plane *plane); -int vmw_du_cursor_plane_disable(struct drm_plane *plane); -int vmw_du_cursor_plane_update(struct drm_plane *plane, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - int crtc_x, int crtc_y, - unsigned int crtc_w, - unsigned int crtc_h, - uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h); /* Atomic Helpers */ int vmw_du_primary_plane_atomic_check(struct drm_plane *plane, @@ -356,8 +343,6 @@ int vmw_du_cursor_plane_atomic_check(struct drm_plane *plane, struct drm_plane_state *state); void vmw_du_cursor_plane_atomic_update(struct drm_plane *plane, struct drm_plane_state *old_state); -void vmw_du_cursor_plane_atomic_disable(struct drm_plane *plane, - struct drm_plane_state *old_state); int vmw_du_cursor_plane_prepare_fb(struct drm_plane *plane, struct drm_plane_state *new_state); void vmw_du_plane_cleanup_fb(struct drm_plane *plane, -- cgit v1.2.3 From 1929e6610bddf0cc44f0859fc72d4016cba0c1fa Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Wed, 7 Jun 2017 14:46:15 +0200 Subject: drm/vmwgfx: Bump driver minor and date While the atomic modesetting capability is signaled also elsewhere, also reflect it by a driver minor bump. Signed-off-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 130d51c5ec6a..4b948fba9eec 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -41,9 +41,9 @@ #include #include "vmwgfx_fence.h" -#define VMWGFX_DRIVER_DATE "20170221" +#define VMWGFX_DRIVER_DATE "20170607" #define VMWGFX_DRIVER_MAJOR 2 -#define VMWGFX_DRIVER_MINOR 12 +#define VMWGFX_DRIVER_MINOR 13 #define VMWGFX_DRIVER_PATCHLEVEL 0 #define VMWGFX_FILE_PAGE_OFFSET 0x00100000 #define VMWGFX_FIFO_STATIC_SIZE (1024*1024) -- cgit v1.2.3