From 7920af5c826cb4a7ada1ae26fdd317642805adc2 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sat, 12 Feb 2022 14:50:48 -0600 Subject: gpio: rockchip: Reset int_bothedge when changing trigger With v2 hardware, an IRQ can be configured to trigger on both edges via a bit in the int_bothedge register. Currently, the driver sets this bit when changing the trigger type to IRQ_TYPE_EDGE_BOTH, but fails to reset this bit if the trigger type is later changed to something else. This causes spurious IRQs, and when using gpio-keys with wakeup-event-action set to EV_ACT_(DE)ASSERTED, those IRQs translate into spurious wakeups. Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller") Reported-by: Guillaume Savaton Tested-by: Guillaume Savaton Signed-off-by: Samuel Holland Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-rockchip.c | 56 +++++++++++++++++++++++--------------------- 1 file changed, 29 insertions(+), 27 deletions(-) (limited to 'drivers/gpio/gpio-rockchip.c') diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c index a4c4e4584f5b..099e358d2491 100644 --- a/drivers/gpio/gpio-rockchip.c +++ b/drivers/gpio/gpio-rockchip.c @@ -410,10 +410,8 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type) level = rockchip_gpio_readl(bank, bank->gpio_regs->int_type); polarity = rockchip_gpio_readl(bank, bank->gpio_regs->int_polarity); - switch (type) { - case IRQ_TYPE_EDGE_BOTH: + if (type == IRQ_TYPE_EDGE_BOTH) { if (bank->gpio_type == GPIO_TYPE_V2) { - bank->toggle_edge_mode &= ~mask; rockchip_gpio_writel_bit(bank, d->hwirq, 1, bank->gpio_regs->int_bothedge); goto out; @@ -431,30 +429,34 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type) else polarity |= mask; } - break; - case IRQ_TYPE_EDGE_RISING: - bank->toggle_edge_mode &= ~mask; - level |= mask; - polarity |= mask; - break; - case IRQ_TYPE_EDGE_FALLING: - bank->toggle_edge_mode &= ~mask; - level |= mask; - polarity &= ~mask; - break; - case IRQ_TYPE_LEVEL_HIGH: - bank->toggle_edge_mode &= ~mask; - level &= ~mask; - polarity |= mask; - break; - case IRQ_TYPE_LEVEL_LOW: - bank->toggle_edge_mode &= ~mask; - level &= ~mask; - polarity &= ~mask; - break; - default: - ret = -EINVAL; - goto out; + } else { + if (bank->gpio_type == GPIO_TYPE_V2) { + rockchip_gpio_writel_bit(bank, d->hwirq, 0, + bank->gpio_regs->int_bothedge); + } else { + bank->toggle_edge_mode &= ~mask; + } + switch (type) { + case IRQ_TYPE_EDGE_RISING: + level |= mask; + polarity |= mask; + break; + case IRQ_TYPE_EDGE_FALLING: + level |= mask; + polarity &= ~mask; + break; + case IRQ_TYPE_LEVEL_HIGH: + level &= ~mask; + polarity |= mask; + break; + case IRQ_TYPE_LEVEL_LOW: + level &= ~mask; + polarity &= ~mask; + break; + default: + ret = -EINVAL; + goto out; + } } rockchip_gpio_writel(bank, level, bank->gpio_regs->int_type); -- cgit v1.2.3