From 608589b15f02e59e8c40df7ef861064f1b6fa504 Mon Sep 17 00:00:00 2001 From: wu guoxing <b39297@freescale.com> Date: Mon, 30 Jan 2012 14:31:20 +0800 Subject: ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function we only use the gpio function of mc9s08dz60 mcu chip, so just add the gpio driver, as this mcu will never be used in other board. Signed-off-by: Wu Guoxing <b39297@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> --- drivers/gpio/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpio/Makefile') diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index fa10df604c01..8863a7f2dece 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o +obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o -- cgit v1.2.3 From b43ab901d671e3e3cad425ea5e9a3c74e266dcdd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Mon, 27 Jun 2011 09:26:23 +0200 Subject: gpio: Add a driver for Sodaville GPIO controller Sodaville has GPIO controller behind the PCI bus. To my suprissed it is not the same as on PXA. The interrupt & gpio chip can be referenced from the device tree like from any other driver. Unfortunately the driver which uses the gpio interrupt has to use irq_of_parse_and_map() instead of platform_get_irq(). The problem is that the platform device (which is created from the device tree) is most likely created before the interrupt chip is registered and therefore irq_of_parse_and_map() fails. In theory the driver works as module. In reality most of the irq functions are not exported to modules and it is possible that _this_ module is unloaded while the provided irqs are still in use. Signed-off-by: Hans J. Koch <hjk@linutronix.de> [torbenh@linutronix.de: make it work after the irq namespace cleanup, add some device tree entries.] Signed-off-by: Torben Hohn <torbenh@linutronix.de> [bigeasy@linutronix.de: convert to generic irq & gpio chip] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [grant.likely@secretlab.ca: depend on x86 to avoid irq_domain breakage] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> --- .../devicetree/bindings/gpio/sodaville.txt | 48 ++++ arch/x86/platform/ce4100/falconfalls.dts | 7 +- drivers/gpio/Kconfig | 8 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-sodaville.c | 302 +++++++++++++++++++++ 5 files changed, 364 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/sodaville.txt create mode 100644 drivers/gpio/gpio-sodaville.c (limited to 'drivers/gpio/Makefile') diff --git a/Documentation/devicetree/bindings/gpio/sodaville.txt b/Documentation/devicetree/bindings/gpio/sodaville.txt new file mode 100644 index 000000000000..563eff22b975 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/sodaville.txt @@ -0,0 +1,48 @@ +GPIO controller on CE4100 / Sodaville SoCs +========================================== + +The bindings for CE4100's GPIO controller match the generic description +which is covered by the gpio.txt file in this folder. + +The only additional property is the intel,muxctl property which holds the +value which is written into the MUXCNTL register. + +There is no compatible property for now because the driver is probed via +PCI id (vendor 0x8086 device 0x2e67). + +The interrupt specifier consists of two cells encoded as follows: + - <1st cell>: The interrupt-number that identifies the interrupt source. + - <2nd cell>: The level-sense information, encoded as follows: + 4 - active high level-sensitive + 8 - active low level-sensitive + +Example of the GPIO device and one user: + + pcigpio: gpio@b,1 { + /* two cells for GPIO and interrupt */ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "pci8086,2e67.2", + "pci8086,2e67", + "pciclassff0000", + "pciclassff00"; + + reg = <0x15900 0x0 0x0 0x0 0x0>; + /* Interrupt line of the gpio device */ + interrupts = <15 1>; + /* It is an interrupt and GPIO controller itself */ + interrupt-controller; + gpio-controller; + intel,muxctl = <0>; + }; + + testuser@20 { + compatible = "example,testuser"; + /* User the 11th GPIO line as an active high triggered + * level interrupt + */ + interrupts = <11 8>; + interrupt-parent = <&pcigpio>; + /* Use this GPIO also with the gpio functions */ + gpios = <&pcigpio 11 0>; + }; diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts index e70be38ce039..ce874f872cc6 100644 --- a/arch/x86/platform/ce4100/falconfalls.dts +++ b/arch/x86/platform/ce4100/falconfalls.dts @@ -208,16 +208,19 @@ interrupts = <14 1>; }; - gpio@b,1 { + pcigpio: gpio@b,1 { + #gpio-cells = <2>; + #interrupt-cells = <2>; compatible = "pci8086,2e67.2", "pci8086,2e67", "pciclassff0000", "pciclassff00"; - #gpio-cells = <2>; reg = <0x15900 0x0 0x0 0x0 0x0>; interrupts = <15 1>; + interrupt-controller; gpio-controller; + intel,muxctl = <0>; }; i2c-controller@b,2 { diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index eaa7d3828e70..dbb1909ca0a2 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -417,6 +417,14 @@ config GPIO_ML_IOH Hub) which is for IVI(In-Vehicle Infotainment) use. This driver can access the IOH's GPIO device. +config GPIO_SODAVILLE + bool "Intel Sodaville GPIO support" + depends on X86 && PCI && OF + select GPIO_GENERIC + select GENERIC_IRQ_CHIP + help + Say Y here to support Intel Sodaville GPIO. + config GPIO_TIMBERDALE bool "Support for timberdale GPIO IP" depends on MFD_TIMBERDALE && HAS_IOMEM diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 8863a7f2dece..593bdcd1976e 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o +obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o diff --git a/drivers/gpio/gpio-sodaville.c b/drivers/gpio/gpio-sodaville.c new file mode 100644 index 000000000000..9ba15d31d242 --- /dev/null +++ b/drivers/gpio/gpio-sodaville.c @@ -0,0 +1,302 @@ +/* + * GPIO interface for Intel Sodaville SoCs. + * + * Copyright (c) 2010, 2011 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + */ + +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/of_irq.h> +#include <linux/basic_mmio_gpio.h> + +#define DRV_NAME "sdv_gpio" +#define SDV_NUM_PUB_GPIOS 12 +#define PCI_DEVICE_ID_SDV_GPIO 0x2e67 +#define GPIO_BAR 0 + +#define GPOUTR 0x00 +#define GPOER 0x04 +#define GPINR 0x08 + +#define GPSTR 0x0c +#define GPIT1R0 0x10 +#define GPIO_INT 0x14 +#define GPIT1R1 0x18 + +#define GPMUXCTL 0x1c + +struct sdv_gpio_chip_data { + int irq_base; + void __iomem *gpio_pub_base; + struct irq_domain id; + struct irq_chip_generic *gc; + struct bgpio_chip bgpio; +}; + +static int sdv_gpio_pub_set_type(struct irq_data *d, unsigned int type) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct sdv_gpio_chip_data *sd = gc->private; + void __iomem *type_reg; + u32 irq_offs = d->irq - sd->irq_base; + u32 reg; + + if (irq_offs < 8) + type_reg = sd->gpio_pub_base + GPIT1R0; + else + type_reg = sd->gpio_pub_base + GPIT1R1; + + reg = readl(type_reg); + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + reg &= ~BIT(4 * (irq_offs % 8)); + break; + + case IRQ_TYPE_LEVEL_LOW: + reg |= BIT(4 * (irq_offs % 8)); + break; + + default: + return -EINVAL; + } + + writel(reg, type_reg); + return 0; +} + +static irqreturn_t sdv_gpio_pub_irq_handler(int irq, void *data) +{ + struct sdv_gpio_chip_data *sd = data; + u32 irq_stat = readl(sd->gpio_pub_base + GPSTR); + + irq_stat &= readl(sd->gpio_pub_base + GPIO_INT); + if (!irq_stat) + return IRQ_NONE; + + while (irq_stat) { + u32 irq_bit = __fls(irq_stat); + + irq_stat &= ~BIT(irq_bit); + generic_handle_irq(sd->irq_base + irq_bit); + } + + return IRQ_HANDLED; +} + +static int sdv_xlate(struct irq_domain *h, struct device_node *node, + const u32 *intspec, u32 intsize, irq_hw_number_t *out_hwirq, + u32 *out_type) +{ + u32 line, type; + + if (node != h->of_node) + return -EINVAL; + + if (intsize < 2) + return -EINVAL; + + line = *intspec; + *out_hwirq = line; + + intspec++; + type = *intspec; + + switch (type) { + case IRQ_TYPE_LEVEL_LOW: + case IRQ_TYPE_LEVEL_HIGH: + *out_type = type; + break; + default: + return -EINVAL; + } + return 0; +} + +static struct irq_domain_ops irq_domain_sdv_ops = { + .dt_translate = sdv_xlate, +}; + +static __devinit int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd, + struct pci_dev *pdev) +{ + struct irq_chip_type *ct; + int ret; + + sd->irq_base = irq_alloc_descs(-1, 0, SDV_NUM_PUB_GPIOS, -1); + if (sd->irq_base < 0) + return sd->irq_base; + + /* mask + ACK all interrupt sources */ + writel(0, sd->gpio_pub_base + GPIO_INT); + writel((1 << 11) - 1, sd->gpio_pub_base + GPSTR); + + ret = request_irq(pdev->irq, sdv_gpio_pub_irq_handler, IRQF_SHARED, + "sdv_gpio", sd); + if (ret) + goto out_free_desc; + + sd->id.irq_base = sd->irq_base; + sd->id.of_node = of_node_get(pdev->dev.of_node); + sd->id.ops = &irq_domain_sdv_ops; + + /* + * This gpio irq controller latches level irqs. Testing shows that if + * we unmask & ACK the IRQ before the source of the interrupt is gone + * then the interrupt is active again. + */ + sd->gc = irq_alloc_generic_chip("sdv-gpio", 1, sd->irq_base, + sd->gpio_pub_base, handle_fasteoi_irq); + if (!sd->gc) { + ret = -ENOMEM; + goto out_free_irq; + } + + sd->gc->private = sd; + ct = sd->gc->chip_types; + ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; + ct->regs.eoi = GPSTR; + ct->regs.mask = GPIO_INT; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->chip.irq_eoi = irq_gc_eoi; + ct->chip.irq_set_type = sdv_gpio_pub_set_type; + + irq_setup_generic_chip(sd->gc, IRQ_MSK(SDV_NUM_PUB_GPIOS), + IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, + IRQ_LEVEL | IRQ_NOPROBE); + + irq_domain_add(&sd->id); + return 0; +out_free_irq: + free_irq(pdev->irq, sd); +out_free_desc: + irq_free_descs(sd->irq_base, SDV_NUM_PUB_GPIOS); + return ret; +} + +static int __devinit sdv_gpio_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + struct sdv_gpio_chip_data *sd; + unsigned long addr; + const void *prop; + int len; + int ret; + u32 mux_val; + + sd = kzalloc(sizeof(struct sdv_gpio_chip_data), GFP_KERNEL); + if (!sd) + return -ENOMEM; + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "can't enable device.\n"); + goto done; + } + + ret = pci_request_region(pdev, GPIO_BAR, DRV_NAME); + if (ret) { + dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR); + goto disable_pci; + } + + addr = pci_resource_start(pdev, GPIO_BAR); + if (!addr) + goto release_reg; + sd->gpio_pub_base = ioremap(addr, pci_resource_len(pdev, GPIO_BAR)); + + prop = of_get_property(pdev->dev.of_node, "intel,muxctl", &len); + if (prop && len == 4) { + mux_val = of_read_number(prop, 1); + writel(mux_val, sd->gpio_pub_base + GPMUXCTL); + } + + ret = bgpio_init(&sd->bgpio, &pdev->dev, 4, + sd->gpio_pub_base + GPINR, sd->gpio_pub_base + GPOUTR, + NULL, sd->gpio_pub_base + GPOER, NULL, false); + if (ret) + goto unmap; + sd->bgpio.gc.ngpio = SDV_NUM_PUB_GPIOS; + + ret = gpiochip_add(&sd->bgpio.gc); + if (ret < 0) { + dev_err(&pdev->dev, "gpiochip_add() failed.\n"); + goto unmap; + } + + ret = sdv_register_irqsupport(sd, pdev); + if (ret) + goto unmap; + + pci_set_drvdata(pdev, sd); + dev_info(&pdev->dev, "Sodaville GPIO driver registered.\n"); + return 0; + +unmap: + iounmap(sd->gpio_pub_base); +release_reg: + pci_release_region(pdev, GPIO_BAR); +disable_pci: + pci_disable_device(pdev); +done: + kfree(sd); + return ret; +} + +static void sdv_gpio_remove(struct pci_dev *pdev) +{ + struct sdv_gpio_chip_data *sd = pci_get_drvdata(pdev); + + irq_domain_del(&sd->id); + free_irq(pdev->irq, sd); + irq_free_descs(sd->irq_base, SDV_NUM_PUB_GPIOS); + + if (gpiochip_remove(&sd->bgpio.gc)) + dev_err(&pdev->dev, "gpiochip_remove() failed.\n"); + + pci_release_region(pdev, GPIO_BAR); + iounmap(sd->gpio_pub_base); + pci_disable_device(pdev); + kfree(sd); +} + +static struct pci_device_id sdv_gpio_pci_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_SDV_GPIO) }, + { 0, }, +}; + +static struct pci_driver sdv_gpio_driver = { + .name = DRV_NAME, + .id_table = sdv_gpio_pci_ids, + .probe = sdv_gpio_probe, + .remove = sdv_gpio_remove, +}; + +static int __init sdv_gpio_init(void) +{ + return pci_register_driver(&sdv_gpio_driver); +} +module_init(sdv_gpio_init); + +static void __exit sdv_gpio_exit(void) +{ + pci_unregister_driver(&sdv_gpio_driver); +} +module_exit(sdv_gpio_exit); + +MODULE_AUTHOR("Hans J. Koch <hjk@linutronix.de>"); +MODULE_DESCRIPTION("GPIO interface for Intel Sodaville SoCs"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3