From 9704efaa52ab18eb3504c4e0bc421c1d01b7981a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 29 Jul 2011 16:21:57 +0530 Subject: dmaengine/dmatest: Terminate transfers on all channels in case of error or exit In case, some error occurs while doing memcpy transfers, we must terminate all transfers physically too. This is achieved by calling device_control() routine with TERMINATE_ALL as parameter. This is also required to be done in case module is removed while we are in middle of some transfers. Signed-off-by: Viresh Kumar Signed-off-by: Vinod Koul --- drivers/dma/dmatest.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/dma') diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 765f5ff22304..accc18441b16 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -477,6 +477,8 @@ err_srcs: pr_notice("%s: terminating after %u tests, %u failures (status %d)\n", thread_name, total_tests, failed_tests, ret); + /* terminate all transfers on specified channels */ + chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); if (iterations > 0) while (!kthread_should_stop()) { DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait_dmatest_exit); @@ -499,6 +501,10 @@ static void dmatest_cleanup_channel(struct dmatest_chan *dtc) list_del(&thread->node); kfree(thread); } + + /* terminate all transfers on specified channels */ + dtc->chan->device->device_control(dtc->chan, DMA_TERMINATE_ALL, 0); + kfree(dtc); } -- cgit v1.2.3 From ef298c21c0d9c06ed89ea2fa724c3a018acfff39 Mon Sep 17 00:00:00 2001 From: Lothar Waßmann Date: Mon, 8 Aug 2011 14:47:47 +0200 Subject: mxs-dma: enable CLKGATE before accessing registers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After calling mxs_dma_disable_chan() for a channel, that channel becomes unusable because some controller registers can only be written when the clock is enabled via CLKGATE. Signed-off-by: Lothar Waßmann Signed-off-by: Vinod Koul --- drivers/dma/mxs-dma.c | 45 ++++++++++++++++++++++++--------------------- 1 file changed, 24 insertions(+), 21 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index be641cbd36fc..b4588bdd98bb 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -130,6 +130,23 @@ struct mxs_dma_engine { struct mxs_dma_chan mxs_chans[MXS_DMA_CHANNELS]; }; +static inline void mxs_dma_clkgate(struct mxs_dma_chan *mxs_chan, int enable) +{ + struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; + int chan_id = mxs_chan->chan.chan_id; + int set_clr = enable ? MXS_CLR_ADDR : MXS_SET_ADDR; + + /* enable apbh channel clock */ + if (dma_is_apbh()) { + if (apbh_is_old()) + writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL), + mxs_dma->base + HW_APBHX_CTRL0 + set_clr); + else + writel(1 << chan_id, + mxs_dma->base + HW_APBHX_CTRL0 + set_clr); + } +} + static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan) { struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; @@ -148,38 +165,21 @@ static void mxs_dma_enable_chan(struct mxs_dma_chan *mxs_chan) struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; int chan_id = mxs_chan->chan.chan_id; + /* clkgate needs to be enabled before writing other registers */ + mxs_dma_clkgate(mxs_chan, 1); + /* set cmd_addr up */ writel(mxs_chan->ccw_phys, mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(chan_id)); - /* enable apbh channel clock */ - if (dma_is_apbh()) { - if (apbh_is_old()) - writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL), - mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR); - else - writel(1 << chan_id, - mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR); - } - /* write 1 to SEMA to kick off the channel */ writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(chan_id)); } static void mxs_dma_disable_chan(struct mxs_dma_chan *mxs_chan) { - struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; - int chan_id = mxs_chan->chan.chan_id; - /* disable apbh channel clock */ - if (dma_is_apbh()) { - if (apbh_is_old()) - writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL), - mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR); - else - writel(1 << chan_id, - mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR); - } + mxs_dma_clkgate(mxs_chan, 0); mxs_chan->status = DMA_SUCCESS; } @@ -338,7 +338,10 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan) if (ret) goto err_clk; + /* clkgate needs to be enabled for reset to finish */ + mxs_dma_clkgate(mxs_chan, 1); mxs_dma_reset_chan(mxs_chan); + mxs_dma_clkgate(mxs_chan, 0); dma_async_tx_descriptor_init(&mxs_chan->desc, chan); mxs_chan->desc.tx_submit = mxs_dma_tx_submit; -- cgit v1.2.3 From d8cb04b070c2a55f7201714d231cff4f8f9fbd16 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 27 Jul 2011 12:21:28 +0000 Subject: dmaengine: at_hdmac: replace spin_lock* with irqsave variants MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit dmaengine routines can be called from interrupt context and with interrupts disabled. Whereas spin_unlock_bh can't be called from such contexts. So this patch converts all spin_lock* routines to irqsave variants. Also, spin_lock() used in tasklet is converted to irqsave variants, as tasklet can be interrupted, and dma requests from such interruptions may also call spin_lock. Idea from dw_dmac patch by Viresh Kumar. Signed-off-by: Nicolas Ferre Signed-off-by: Uwe Kleine-König Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 52 +++++++++++++++++++++++++++++--------------------- 1 file changed, 30 insertions(+), 22 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 6a483eac7b3f..fd87b9690e1b 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -107,10 +107,11 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) { struct at_desc *desc, *_desc; struct at_desc *ret = NULL; + unsigned long flags; unsigned int i = 0; LIST_HEAD(tmp_list); - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) { i++; if (async_tx_test_ack(&desc->txd)) { @@ -121,7 +122,7 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) dev_dbg(chan2dev(&atchan->chan_common), "desc %p not ACKed\n", desc); } - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); dev_vdbg(chan2dev(&atchan->chan_common), "scanned %u descriptors on freelist\n", i); @@ -129,9 +130,9 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) if (!ret) { ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC); if (ret) { - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); atchan->descs_allocated++; - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } else { dev_err(chan2dev(&atchan->chan_common), "not enough descriptors available\n"); @@ -150,8 +151,9 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc) { if (desc) { struct at_desc *child; + unsigned long flags; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); list_for_each_entry(child, &desc->tx_list, desc_node) dev_vdbg(chan2dev(&atchan->chan_common), "moving child desc %p to freelist\n", @@ -160,7 +162,7 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc) dev_vdbg(chan2dev(&atchan->chan_common), "moving desc %p to freelist\n", desc); list_add(&desc->desc_node, &atchan->free_list); - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } } @@ -471,8 +473,9 @@ static void atc_handle_cyclic(struct at_dma_chan *atchan) static void atc_tasklet(unsigned long data) { struct at_dma_chan *atchan = (struct at_dma_chan *)data; + unsigned long flags; - spin_lock(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); if (test_and_clear_bit(ATC_IS_ERROR, &atchan->status)) atc_handle_error(atchan); else if (test_bit(ATC_IS_CYCLIC, &atchan->status)) @@ -480,7 +483,7 @@ static void atc_tasklet(unsigned long data) else atc_advance_work(atchan); - spin_unlock(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } static irqreturn_t at_dma_interrupt(int irq, void *dev_id) @@ -539,8 +542,9 @@ static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx) struct at_desc *desc = txd_to_at_desc(tx); struct at_dma_chan *atchan = to_at_dma_chan(tx->chan); dma_cookie_t cookie; + unsigned long flags; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); cookie = atc_assign_cookie(atchan, desc); if (list_empty(&atchan->active_list)) { @@ -554,7 +558,7 @@ static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx) list_add_tail(&desc->desc_node, &atchan->queue); } - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); return cookie; } @@ -927,28 +931,29 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, struct at_dma_chan *atchan = to_at_dma_chan(chan); struct at_dma *atdma = to_at_dma(chan->device); int chan_id = atchan->chan_common.chan_id; + unsigned long flags; LIST_HEAD(list); dev_vdbg(chan2dev(chan), "atc_control (%d)\n", cmd); if (cmd == DMA_PAUSE) { - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id)); set_bit(ATC_IS_PAUSED, &atchan->status); - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } else if (cmd == DMA_RESUME) { if (!test_bit(ATC_IS_PAUSED, &atchan->status)) return 0; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); dma_writel(atdma, CHDR, AT_DMA_RES(chan_id)); clear_bit(ATC_IS_PAUSED, &atchan->status); - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } else if (cmd == DMA_TERMINATE_ALL) { struct at_desc *desc, *_desc; /* @@ -957,7 +962,7 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * channel. We still have to poll the channel enable bit due * to AHB/HSB limitations. */ - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); /* disabling channel: must also remove suspend state */ dma_writel(atdma, CHDR, AT_DMA_RES(chan_id) | atchan->mask); @@ -978,7 +983,7 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, /* if channel dedicated to cyclic operations, free it */ clear_bit(ATC_IS_CYCLIC, &atchan->status); - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } else { return -ENXIO; } @@ -1004,9 +1009,10 @@ atc_tx_status(struct dma_chan *chan, struct at_dma_chan *atchan = to_at_dma_chan(chan); dma_cookie_t last_used; dma_cookie_t last_complete; + unsigned long flags; enum dma_status ret; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); last_complete = atchan->completed_cookie; last_used = chan->cookie; @@ -1021,7 +1027,7 @@ atc_tx_status(struct dma_chan *chan, ret = dma_async_is_complete(cookie, last_complete, last_used); } - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); if (ret != DMA_SUCCESS) dma_set_tx_state(txstate, last_complete, last_used, @@ -1046,6 +1052,7 @@ atc_tx_status(struct dma_chan *chan, static void atc_issue_pending(struct dma_chan *chan) { struct at_dma_chan *atchan = to_at_dma_chan(chan); + unsigned long flags; dev_vdbg(chan2dev(chan), "issue_pending\n"); @@ -1053,11 +1060,11 @@ static void atc_issue_pending(struct dma_chan *chan) if (test_bit(ATC_IS_CYCLIC, &atchan->status)) return; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); if (!atc_chan_is_enabled(atchan)) { atc_advance_work(atchan); } - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } /** @@ -1073,6 +1080,7 @@ static int atc_alloc_chan_resources(struct dma_chan *chan) struct at_dma *atdma = to_at_dma(chan->device); struct at_desc *desc; struct at_dma_slave *atslave; + unsigned long flags; int i; u32 cfg; LIST_HEAD(tmp_list); @@ -1116,11 +1124,11 @@ static int atc_alloc_chan_resources(struct dma_chan *chan) list_add_tail(&desc->desc_node, &tmp_list); } - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); atchan->descs_allocated = i; list_splice(&tmp_list, &atchan->free_list); atchan->completed_cookie = chan->cookie = 1; - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); /* channel parameters */ channel_writel(atchan, CFG, cfg); -- cgit v1.2.3 From c0ba5947370a0900b1823922fc4faf41515bc901 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 27 Jul 2011 12:21:29 +0000 Subject: dmaengine: at_hdmac: improve power management routines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Save/restore dma controller state across a suspend-resume sequence. The prepare() function will wait for the non-cyclic channels to become idle. It also deals with cyclic operations with the start at next period while resuming. Signed-off-by: Nicolas Ferre Signed-off-by: Uwe Kleine-König Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 88 ++++++++++++++++++++++++++++++++++++++++++++- drivers/dma/at_hdmac_regs.h | 7 ++++ 2 files changed, 94 insertions(+), 1 deletion(-) (limited to 'drivers/dma') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index fd87b9690e1b..0ead008e3bdf 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -1385,27 +1385,113 @@ static void at_dma_shutdown(struct platform_device *pdev) clk_disable(atdma->clk); } +static int at_dma_prepare(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct at_dma *atdma = platform_get_drvdata(pdev); + struct dma_chan *chan, *_chan; + + list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels, + device_node) { + struct at_dma_chan *atchan = to_at_dma_chan(chan); + /* wait for transaction completion (except in cyclic case) */ + if (atc_chan_is_enabled(atchan) && + !test_bit(ATC_IS_CYCLIC, &atchan->status)) + return -EAGAIN; + } + return 0; +} + +static void atc_suspend_cyclic(struct at_dma_chan *atchan) +{ + struct dma_chan *chan = &atchan->chan_common; + + /* Channel should be paused by user + * do it anyway even if it is not done already */ + if (!test_bit(ATC_IS_PAUSED, &atchan->status)) { + dev_warn(chan2dev(chan), + "cyclic channel not paused, should be done by channel user\n"); + atc_control(chan, DMA_PAUSE, 0); + } + + /* now preserve additional data for cyclic operations */ + /* next descriptor address in the cyclic list */ + atchan->save_dscr = channel_readl(atchan, DSCR); + + vdbg_dump_regs(atchan); +} + static int at_dma_suspend_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct at_dma *atdma = platform_get_drvdata(pdev); + struct dma_chan *chan, *_chan; - at_dma_off(platform_get_drvdata(pdev)); + /* preserve data */ + list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels, + device_node) { + struct at_dma_chan *atchan = to_at_dma_chan(chan); + + if (test_bit(ATC_IS_CYCLIC, &atchan->status)) + atc_suspend_cyclic(atchan); + atchan->save_cfg = channel_readl(atchan, CFG); + } + atdma->save_imr = dma_readl(atdma, EBCIMR); + + /* disable DMA controller */ + at_dma_off(atdma); clk_disable(atdma->clk); return 0; } +static void atc_resume_cyclic(struct at_dma_chan *atchan) +{ + struct at_dma *atdma = to_at_dma(atchan->chan_common.device); + + /* restore channel status for cyclic descriptors list: + * next descriptor in the cyclic list at the time of suspend */ + channel_writel(atchan, SADDR, 0); + channel_writel(atchan, DADDR, 0); + channel_writel(atchan, CTRLA, 0); + channel_writel(atchan, CTRLB, 0); + channel_writel(atchan, DSCR, atchan->save_dscr); + dma_writel(atdma, CHER, atchan->mask); + + /* channel pause status should be removed by channel user + * We cannot take the initiative to do it here */ + + vdbg_dump_regs(atchan); +} + static int at_dma_resume_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct at_dma *atdma = platform_get_drvdata(pdev); + struct dma_chan *chan, *_chan; + /* bring back DMA controller */ clk_enable(atdma->clk); dma_writel(atdma, EN, AT_DMA_ENABLE); + + /* clear any pending interrupt */ + while (dma_readl(atdma, EBCISR)) + cpu_relax(); + + /* restore saved data */ + dma_writel(atdma, EBCIER, atdma->save_imr); + list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels, + device_node) { + struct at_dma_chan *atchan = to_at_dma_chan(chan); + + channel_writel(atchan, CFG, atchan->save_cfg); + if (test_bit(ATC_IS_CYCLIC, &atchan->status)) + atc_resume_cyclic(atchan); + } return 0; } static const struct dev_pm_ops at_dma_dev_pm_ops = { + .prepare = at_dma_prepare, .suspend_noirq = at_dma_suspend_noirq, .resume_noirq = at_dma_resume_noirq, }; diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index 087dbf1dd39c..6f0c4a3eb091 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -204,6 +204,9 @@ enum atc_status { * @status: transmit status information from irq/prep* functions * to tasklet (use atomic operations) * @tasklet: bottom half to finish transaction work + * @save_cfg: configuration register that is saved on suspend/resume cycle + * @save_dscr: for cyclic operations, preserve next descriptor address in + * the cyclic list on suspend/resume cycle * @lock: serializes enqueue/dequeue operations to descriptors lists * @completed_cookie: identifier for the most recently completed operation * @active_list: list of descriptors dmaengine is being running on @@ -218,6 +221,8 @@ struct at_dma_chan { u8 mask; unsigned long status; struct tasklet_struct tasklet; + u32 save_cfg; + u32 save_dscr; spinlock_t lock; @@ -248,6 +253,7 @@ static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan) * @chan_common: common dmaengine dma_device object members * @ch_regs: memory mapped register base * @clk: dma controller clock + * @save_imr: interrupt mask register that is saved on suspend/resume cycle * @all_chan_mask: all channels availlable in a mask * @dma_desc_pool: base of DMA descriptor region (DMA address) * @chan: channels table to store at_dma_chan structures @@ -256,6 +262,7 @@ struct at_dma { struct dma_device dma_common; void __iomem *regs; struct clk *clk; + u32 save_imr; u8 all_chan_mask; -- cgit v1.2.3 From 3c477482bb9f976e5451c50be7d3d60ea6f88646 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 25 Jul 2011 21:09:23 +0000 Subject: dmaengine: at_hdmac: add wrappers for testing channel state Cyclic property and paused state are encoded as bits in the channel status bitfield. Tests of those bits are wrapped in convenient helper functions. Signed-off-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 19 +++++++++---------- drivers/dma/at_hdmac_regs.h | 17 +++++++++++++++++ 2 files changed, 26 insertions(+), 10 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 0ead008e3bdf..d774800b9fa4 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -301,7 +301,7 @@ atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc) /* for cyclic transfers, * no need to replay callback function while stopping */ - if (!test_bit(ATC_IS_CYCLIC, &atchan->status)) { + if (!atc_chan_is_cyclic(atchan)) { dma_async_tx_callback callback = txd->callback; void *param = txd->callback_param; @@ -478,7 +478,7 @@ static void atc_tasklet(unsigned long data) spin_lock_irqsave(&atchan->lock, flags); if (test_and_clear_bit(ATC_IS_ERROR, &atchan->status)) atc_handle_error(atchan); - else if (test_bit(ATC_IS_CYCLIC, &atchan->status)) + else if (atc_chan_is_cyclic(atchan)) atc_handle_cyclic(atchan); else atc_advance_work(atchan); @@ -945,7 +945,7 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, spin_unlock_irqrestore(&atchan->lock, flags); } else if (cmd == DMA_RESUME) { - if (!test_bit(ATC_IS_PAUSED, &atchan->status)) + if (!atc_chan_is_paused(atchan)) return 0; spin_lock_irqsave(&atchan->lock, flags); @@ -1035,7 +1035,7 @@ atc_tx_status(struct dma_chan *chan, else dma_set_tx_state(txstate, last_complete, last_used, 0); - if (test_bit(ATC_IS_PAUSED, &atchan->status)) + if (atc_chan_is_paused(atchan)) ret = DMA_PAUSED; dev_vdbg(chan2dev(chan), "tx_status %d: cookie = %d (d%d, u%d)\n", @@ -1057,7 +1057,7 @@ static void atc_issue_pending(struct dma_chan *chan) dev_vdbg(chan2dev(chan), "issue_pending\n"); /* Not needed for cyclic transfers */ - if (test_bit(ATC_IS_CYCLIC, &atchan->status)) + if (atc_chan_is_cyclic(atchan)) return; spin_lock_irqsave(&atchan->lock, flags); @@ -1395,8 +1395,7 @@ static int at_dma_prepare(struct device *dev) device_node) { struct at_dma_chan *atchan = to_at_dma_chan(chan); /* wait for transaction completion (except in cyclic case) */ - if (atc_chan_is_enabled(atchan) && - !test_bit(ATC_IS_CYCLIC, &atchan->status)) + if (atc_chan_is_enabled(atchan) && !atc_chan_is_cyclic(atchan)) return -EAGAIN; } return 0; @@ -1408,7 +1407,7 @@ static void atc_suspend_cyclic(struct at_dma_chan *atchan) /* Channel should be paused by user * do it anyway even if it is not done already */ - if (!test_bit(ATC_IS_PAUSED, &atchan->status)) { + if (!atc_chan_is_paused(atchan)) { dev_warn(chan2dev(chan), "cyclic channel not paused, should be done by channel user\n"); atc_control(chan, DMA_PAUSE, 0); @@ -1432,7 +1431,7 @@ static int at_dma_suspend_noirq(struct device *dev) device_node) { struct at_dma_chan *atchan = to_at_dma_chan(chan); - if (test_bit(ATC_IS_CYCLIC, &atchan->status)) + if (atc_chan_is_cyclic(atchan)) atc_suspend_cyclic(atchan); atchan->save_cfg = channel_readl(atchan, CFG); } @@ -1484,7 +1483,7 @@ static int at_dma_resume_noirq(struct device *dev) struct at_dma_chan *atchan = to_at_dma_chan(chan); channel_writel(atchan, CFG, atchan->save_cfg); - if (test_bit(ATC_IS_CYCLIC, &atchan->status)) + if (atc_chan_is_cyclic(atchan)) atc_resume_cyclic(atchan); } return 0; diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index 6f0c4a3eb091..aa4c9aebab7c 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -362,6 +362,23 @@ static inline int atc_chan_is_enabled(struct at_dma_chan *atchan) return !!(dma_readl(atdma, CHSR) & atchan->mask); } +/** + * atc_chan_is_paused - test channel pause/resume status + * @atchan: channel we want to test status + */ +static inline int atc_chan_is_paused(struct at_dma_chan *atchan) +{ + return test_bit(ATC_IS_PAUSED, &atchan->status); +} + +/** + * atc_chan_is_cyclic - test if given channel has cyclic property set + * @atchan: channel we want to test status + */ +static inline int atc_chan_is_cyclic(struct at_dma_chan *atchan) +{ + return test_bit(ATC_IS_CYCLIC, &atchan->status); +} /** * set_desc_eol - set end-of-link to descriptor so it will end transfer -- cgit v1.2.3 From d7db80801f8117cf210b9e2cd2c800e326d59fa2 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 5 Aug 2011 11:43:44 +0000 Subject: dmaengine: at_hdmac: fix way to specify cyclic capability In this driver, we can trigger cyclic transfer on peripherals-DMA interfaces. It is dependent on driver implementation but cannot depend on a platform property: we remove the dma_has_cap(DMA_CYCLIC, ) test which has no meaning. Signed-off-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index d774800b9fa4..3b99dc62874b 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -1301,15 +1301,13 @@ static int __init at_dma_probe(struct platform_device *pdev) if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask)) atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy; - if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) + if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) { atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg; - - if (dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask)) + /* controller can do slave DMA: can trigger cyclic transfers */ + dma_cap_set(DMA_CYCLIC, atdma->dma_common.cap_mask); atdma->dma_common.device_prep_dma_cyclic = atc_prep_dma_cyclic; - - if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) || - dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask)) atdma->dma_common.device_control = atc_control; + } dma_writel(atdma, EN, AT_DMA_ENABLE); -- cgit v1.2.3 From 3e27ee8448bcbc8b4f060b107aa622c116f287ab Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:27 +0530 Subject: dmaengine/amba-pl08x: Resolve formatting issues There were few formatting related issues in code. This patch fixes them. Fixes include: - Remove extra blank lines - align code to 80 cols - combine several lines to one line Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 41 ++++++++++++++++------------------------- 1 file changed, 16 insertions(+), 25 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 196a7378d332..4c4a3092e09c 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -125,7 +125,8 @@ struct pl08x_lli { * @phy_chans: array of data for the physical channels * @pool: a pool for the LLI descriptors * @pool_ctr: counter of LLIs in the pool - * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI fetches + * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI + * fetches * @mem_buses: set to indicate memory transfers on AHB2. * @lock: a spinlock for this struct */ @@ -271,7 +272,6 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) writel(val, ch->base + PL080_CH_CONFIG); } - /* * pl08x_terminate_phy_chan() stops the channel, clears the FIFO and * clears any pending interrupt status. This should not be used for @@ -546,7 +546,8 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, llis_va[num_llis].cctl = cctl; llis_va[num_llis].src = bd->srcbus.addr; llis_va[num_llis].dst = bd->dstbus.addr; - llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); + llis_va[num_llis].lli = llis_bus + (num_llis + 1) * + sizeof(struct pl08x_lli); llis_va[num_llis].lli |= bd->lli_bus; if (cctl & PL080_CONTROL_SRC_INCR) @@ -583,12 +584,10 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_lli_build_data bd; int num_llis = 0; u32 cctl; - size_t max_bytes_per_lli; - size_t total_bytes = 0; + size_t max_bytes_per_lli, total_bytes = 0; struct pl08x_lli *llis_va; - txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, - &txd->llis_bus); + txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); if (!txd->llis_va) { dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__); return 0; @@ -779,7 +778,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, total_bytes += lli_len; } - if (odd_bytes) { /* * Creep past the boundary, maintaining @@ -916,9 +914,7 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, * need, but for slaves the physical signals may be muxed! * Can the platform allow us to use this channel? */ - if (plchan->slave && - ch->signal < 0 && - pl08x->pd->get_signal) { + if (plchan->slave && ch->signal < 0 && pl08x->pd->get_signal) { ret = pl08x->pd->get_signal(plchan); if (ret < 0) { dev_dbg(&pl08x->adev->dev, @@ -1007,10 +1003,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt( * If slaves are relying on interrupts to signal completion this function * must not be called with interrupts disabled. */ -static enum dma_status -pl08x_dma_tx_status(struct dma_chan *chan, - dma_cookie_t cookie, - struct dma_tx_state *txstate) +static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *txstate) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); dma_cookie_t last_used; @@ -1588,8 +1582,8 @@ static void pl08x_tasklet(unsigned long data) */ list_for_each_entry(waiting, &pl08x->memcpy.channels, chan.device_node) { - if (waiting->state == PL08X_CHAN_WAITING && - waiting->waiting != NULL) { + if (waiting->state == PL08X_CHAN_WAITING && + waiting->waiting != NULL) { int ret; /* This should REALLY not fail now */ @@ -1684,9 +1678,7 @@ static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan) * Make a local wrapper to hold required data */ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, - struct dma_device *dmadev, - unsigned int channels, - bool slave) + struct dma_device *dmadev, unsigned int channels, bool slave) { struct pl08x_dma_chan *chan; int i; @@ -1836,9 +1828,9 @@ static const struct file_operations pl08x_debugfs_operations = { static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x) { /* Expose a simple debugfs interface to view all clocks */ - (void) debugfs_create_file(dev_name(&pl08x->adev->dev), S_IFREG | S_IRUGO, - NULL, pl08x, - &pl08x_debugfs_operations); + (void) debugfs_create_file(dev_name(&pl08x->adev->dev), + S_IFREG | S_IRUGO, NULL, pl08x, + &pl08x_debugfs_operations); } #else @@ -1973,8 +1965,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) /* Register slave channels */ ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave, - pl08x->pd->num_slave_channels, - true); + pl08x->pd->num_slave_channels, true); if (ret <= 0) { dev_warn(&pl08x->adev->dev, "%s failed to enumerate slave channels - %d\n", -- cgit v1.2.3 From 0c38d70139138713e66c6f98e19a0320014476ff Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:28 +0530 Subject: dmaengine/amba-pl08x: Rearrange inclusion of header files in ascending order Header files included in driver are not present in alphabetical order. Rearrange them in alphabetical order. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 4c4a3092e09c..8e2056bf1623 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -74,19 +74,18 @@ * Global TODO: * - Break out common code from arch/arm/mach-s3c64xx and share */ -#include -#include -#include -#include -#include -#include -#include -#include #include #include #include +#include +#include +#include +#include +#include +#include +#include #include - +#include #include #define DRIVER_NAME "pl08xdmac" -- cgit v1.2.3 From b201c111c87a4cf36d009abe57c62bd14d17d762 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:29 +0530 Subject: dmaengine/amba-pl08x: pass (*ptr) to sizeof() instead of (struct xyz) As mentioned in Documentation/CodingStyle, The preferred form for passing a size of a struct is the following: p = kmalloc(sizeof(*p), ...); The alternative form where struct name is spelled out hurts readability and introduces an opportunity for a bug when the pointer variable type is changed but the corresponding sizeof that is passed to a memory allocator is not. This patch replaces (struct xyz) with *ptr at several occurrences in driver. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 8e2056bf1623..01c2f507e950 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1293,7 +1293,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan, unsigned long flags) { - struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); + struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT); if (txd) { dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); @@ -1690,7 +1690,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, * to cope with that situation. */ for (i = 0; i < channels; i++) { - chan = kzalloc(sizeof(struct pl08x_dma_chan), GFP_KERNEL); + chan = kzalloc(sizeof(*chan), GFP_KERNEL); if (!chan) { dev_err(&pl08x->adev->dev, "%s no memory for channel\n", __func__); @@ -1850,7 +1850,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) return ret; /* Create the driver state holder */ - pl08x = kzalloc(sizeof(struct pl08x_driver_data), GFP_KERNEL); + pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL); if (!pl08x) { ret = -ENOMEM; goto out_no_pl08x; @@ -1929,7 +1929,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) } /* Initialize physical channels */ - pl08x->phy_chans = kmalloc((vd->channels * sizeof(struct pl08x_phy_chan)), + pl08x->phy_chans = kmalloc((vd->channels * sizeof(*pl08x->phy_chans)), GFP_KERNEL); if (!pl08x->phy_chans) { dev_err(&adev->dev, "%s failed to allocate " -- cgit v1.2.3 From 0532e6fced3c4f6a4eda7f078d8aa36405647c07 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:31 +0530 Subject: dmaengine/amba-pl08x: Remove redundant comment and rewrite original Similar comment is present over routine also pl08x_choose_master_bus(). Keeping one of them. Also rewrite that comment to convey message clearly. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 01c2f507e950..6c52959b00af 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -497,9 +497,13 @@ struct pl08x_lli_build_data { }; /* - * Autoselect a master bus to use for the transfer this prefers the - * destination bus if both available if fixed address on one bus the - * other will be chosen + * Autoselect a master bus to use for the transfer. Slave will be the chosen as + * victim in case src & dest are not similarly aligned. i.e. If after aligning + * masters address with width requirements of transfer (by sending few byte by + * byte data), slave is still not aligned, then its width will be reduced to + * BYTE. + * - prefers the destination bus if both available + * - if fixed address on one bus the other will be chosen */ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl) @@ -625,11 +629,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* We need to count this down to zero */ bd.remainder = txd->len; - /* - * Choose bus to align to - * - prefers destination bus if both available - * - if fixed address on one bus chooses other - */ pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu llimax=%zu\n", -- cgit v1.2.3 From 175a5e617cd820d9e22d9e4f6d3ef736b2f874b1 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:32 +0530 Subject: dmaengine/amba-pl08x: Changing few prints to dev_dbg from dev_info For 8 memory and 16 slave channels 35 boot print lines are printed. And that is too much. Most of this would be more useful for debugging. So moving few of them to dev_dbg instead of dev_info. Now only 3 prints will be printed. This also rearrange one of the debug message to fit into two lines. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 6c52959b00af..ead88c9a5e93 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1717,7 +1717,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, kfree(chan); continue; } - dev_info(&pl08x->adev->dev, + dev_dbg(&pl08x->adev->dev, "initialize virtual channel \"%s\"\n", chan->name); @@ -1945,9 +1945,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) spin_lock_init(&ch->lock); ch->serving = NULL; ch->signal = -1; - dev_info(&adev->dev, - "physical channel %d is %s\n", i, - pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE"); + dev_dbg(&adev->dev, "physical channel %d is %s\n", + i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE"); } /* Register as many memcpy channels as there are physical channels */ -- cgit v1.2.3 From b7b6018bad6fd7ebe5a78bda5f2a71a6ecf5406a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:33 +0530 Subject: dmaengine/amba-pl08x: support runtime PM Insert notifiers for the runtime PM API. With this the runtime PM layer kicks in to action where used. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index ead88c9a5e93..5dd97f450925 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -84,6 +84,7 @@ #include #include #include +#include #include #include #include @@ -405,6 +406,7 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, return NULL; } + pm_runtime_get_sync(&pl08x->adev->dev); return ch; } @@ -418,6 +420,8 @@ static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x, /* Stop the channel and clear its interrupts */ pl08x_terminate_phy_chan(pl08x, ch); + pm_runtime_put(&pl08x->adev->dev); + /* Mark it as free */ ch->serving = NULL; spin_unlock_irqrestore(&ch->lock, flags); @@ -1855,6 +1859,9 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) goto out_no_pl08x; } + pm_runtime_set_active(&adev->dev); + pm_runtime_enable(&adev->dev); + /* Initialize memcpy engine */ dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask); pl08x->memcpy.dev = &adev->dev; @@ -1992,6 +1999,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n", amba_part(adev), amba_rev(adev), (unsigned long long)adev->res.start, adev->irq[0]); + + pm_runtime_put(&adev->dev); return 0; out_no_slave_reg: @@ -2010,6 +2019,9 @@ out_no_ioremap: dma_pool_destroy(pl08x->pool); out_no_lli_pool: out_no_platdata: + pm_runtime_put(&adev->dev); + pm_runtime_disable(&adev->dev); + kfree(pl08x); out_no_pl08x: amba_release_regions(adev); -- cgit v1.2.3 From 48a59ef3579492855d41405f8bf0a2983e061976 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:34 +0530 Subject: dmaengine/amba-pl08x: Simplify pl08x_ensure_on() Simply writing 1 on bit 0 is sufficient instead of reading and clearing bits. Also as per manual, for bit 3-31 of DMACConfiguration register: "read undefined, write as 0" So, we must not rely on values read from this registers bit 3-31. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 5dd97f450925..d79688d64886 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1502,13 +1502,7 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) */ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) { - u32 val; - - val = readl(pl08x->base + PL080_CONFIG); - val &= ~(PL080_CONFIG_M2_BE | PL080_CONFIG_M1_BE | PL080_CONFIG_ENABLE); - /* We implicitly clear bit 1 and that means little-endian mode */ - val |= PL080_CONFIG_ENABLE; - writel(val, pl08x->base + PL080_CONFIG); + writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG); } static void pl08x_unmap_buffers(struct pl08x_txd *txd) -- cgit v1.2.3 From 16ca8105040217acf5b4b506d04bb933fb3a76af Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:35 +0530 Subject: dmaengine/amba-pl08x: No need to check "ch->signal < 0" We have just executed following in pl08x_get_phy_channel(): ch->signal = -1; We don't have to compare "ch->signal < 0", as this will always be true. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index d79688d64886..3653961b6088 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -916,7 +916,7 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, * need, but for slaves the physical signals may be muxed! * Can the platform allow us to use this channel? */ - if (plchan->slave && ch->signal < 0 && pl08x->pd->get_signal) { + if (plchan->slave && pl08x->pd->get_signal) { ret = pl08x->pd->get_signal(plchan); if (ret < 0) { dev_dbg(&pl08x->adev->dev, -- cgit v1.2.3 From 28da28365da3f3bea1d4b7212a8a40e4b9ac3229 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:36 +0530 Subject: dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt Currently, if error interrupt occurs, nothing is done in interrupt handler (just clearing the interrupts). We must somehow indicate this to the user that DMA is over, due to ERR interrupt or TC interrupt. So, this patch just schedules existing tasklet, with a print showing error interrupt has occurred on which channels. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 44 +++++++++++++++++++++++--------------------- 1 file changed, 23 insertions(+), 21 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 3653961b6088..6bba32e5ddb8 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1619,38 +1619,40 @@ static void pl08x_tasklet(unsigned long data) static irqreturn_t pl08x_irq(int irq, void *dev) { struct pl08x_driver_data *pl08x = dev; - u32 mask = 0; - u32 val; - int i; - - val = readl(pl08x->base + PL080_ERR_STATUS); - if (val) { - /* An error interrupt (on one or more channels) */ - dev_err(&pl08x->adev->dev, - "%s error interrupt, register value 0x%08x\n", - __func__, val); - /* - * Simply clear ALL PL08X error interrupts, - * regardless of channel and cause - * FIXME: should be 0x00000003 on PL081 really. - */ - writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR); + u32 mask = 0, err, tc, i; + + /* check & clear - ERR & TC interrupts */ + err = readl(pl08x->base + PL080_ERR_STATUS); + if (err) { + dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n", + __func__, err); + writel(err, pl08x->base + PL080_ERR_CLEAR); } - val = readl(pl08x->base + PL080_INT_STATUS); + tc = readl(pl08x->base + PL080_INT_STATUS); + if (tc) + writel(tc, pl08x->base + PL080_TC_CLEAR); + + if (!err && !tc) + return IRQ_NONE; + for (i = 0; i < pl08x->vd->channels; i++) { - if ((1 << i) & val) { + if (((1 << i) & err) || ((1 << i) & tc)) { /* Locate physical channel */ struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i]; struct pl08x_dma_chan *plchan = phychan->serving; + if (!plchan) { + dev_err(&pl08x->adev->dev, + "%s Error TC interrupt on unused channel: 0x%08x\n", + __func__, i); + continue; + } + /* Schedule tasklet on this channel */ tasklet_schedule(&plchan->tasklet); - mask |= (1 << i); } } - /* Clear only the terminal interrupts on channels we processed */ - writel(mask, pl08x->base + PL080_TC_CLEAR); return mask ? IRQ_HANDLED : IRQ_NONE; } -- cgit v1.2.3 From 16a2e7d359b9fc64fb8a6717c0642691b1e60bb7 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:37 +0530 Subject: dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary() Pl080 Manual says: "Bursts do not cross the 1KB address boundary" We can program the controller to cross 1 KB boundary on a burst and controller can take care of this boundary condition by itself. Following is the discussion with ARM Technical Support Guys (David): [Viresh] Manual says: "Bursts do not cross the 1KB address boundary" What does that actually mean? As, Maximum size transferable with a single LLI is 4095 * 4 =16380 ~ 16KB. So, if we don't have src/dest address aligned to burst size, we can't use this big of an LLI. [David] There is a difference between bursts describing the total data transferred by the DMA controller and AHB bursts. Bursts described by the programmable parameters in the PL080 have no direct connection with the bursts that are seen on the AHB bus. The statement that "Bursts do not cross the 1KB address boundary" in the TRM is referring to AHB bursts, where this limitation is a requirement of the AHB spec. You can still issue bursts within the PL080 that are in excess of 1KB. The PL080 will make sure that its bursts are broken down into legal AHB bursts which will be formatted to ensure that no AHB burst crosses a 1KB boundary. Based on above discussion, this patch removes all code related to 1 KB boundary as we are not required to handle this in driver. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 141 ++++++--------------------------------------- include/linux/amba/pl08x.h | 2 - 2 files changed, 17 insertions(+), 126 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 6bba32e5ddb8..be9a1c718f9a 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -149,14 +149,6 @@ struct pl08x_driver_data { * PL08X specific defines */ -/* - * Memory boundaries: the manual for PL08x says that the controller - * cannot read past a 1KiB boundary, so these defines are used to - * create transfer LLIs that do not cross such boundaries. - */ -#define PL08X_BOUNDARY_SHIFT (10) /* 1KB 0x400 */ -#define PL08X_BOUNDARY_SIZE (1 << PL08X_BOUNDARY_SHIFT) - /* Size (bytes) of each LLI buffer allocated for one transfer */ # define PL08X_LLI_TSFR_SIZE 0x2000 @@ -567,18 +559,6 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, bd->remainder -= len; } -/* - * Return number of bytes to fill to boundary, or len. - * This calculation works for any value of addr. - */ -static inline size_t pl08x_pre_boundary(u32 addr, size_t len) -{ - size_t boundary_len = PL08X_BOUNDARY_SIZE - - (addr & (PL08X_BOUNDARY_SIZE - 1)); - - return min(boundary_len, len); -} - /* * This fills in the table of LLIs for the transfer descriptor * Note that we assume we never have to change the burst sizes @@ -685,118 +665,30 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * width left */ while (bd.remainder > (mbus->buswidth - 1)) { - size_t lli_len, target_len, tsize, odd_bytes; + size_t lli_len, tsize; /* * If enough left try to send max possible, * otherwise try to send the remainder */ - target_len = min(bd.remainder, max_bytes_per_lli); - + lli_len = min(bd.remainder, max_bytes_per_lli); /* - * Set bus lengths for incrementing buses to the - * number of bytes which fill to next memory boundary, - * limiting on the target length calculated above. + * Check against minimum bus alignment: Calculate actual + * transfer size in relation to bus width and get a + * maximum remainder of the smallest bus width - 1 */ - if (cctl & PL080_CONTROL_SRC_INCR) - bd.srcbus.fill_bytes = - pl08x_pre_boundary(bd.srcbus.addr, - target_len); - else - bd.srcbus.fill_bytes = target_len; - - if (cctl & PL080_CONTROL_DST_INCR) - bd.dstbus.fill_bytes = - pl08x_pre_boundary(bd.dstbus.addr, - target_len); - else - bd.dstbus.fill_bytes = target_len; - - /* Find the nearest */ - lli_len = min(bd.srcbus.fill_bytes, - bd.dstbus.fill_bytes); - - BUG_ON(lli_len > bd.remainder); - - if (lli_len <= 0) { - dev_err(&pl08x->adev->dev, - "%s lli_len is %zu, <= 0\n", - __func__, lli_len); - return 0; - } - - if (lli_len == target_len) { - /* - * Can send what we wanted. - * Maintain alignment - */ - lli_len = (lli_len/mbus->buswidth) * - mbus->buswidth; - odd_bytes = 0; - } else { - /* - * So now we know how many bytes to transfer - * to get to the nearest boundary. The next - * LLI will past the boundary. However, we - * may be working to a boundary on the slave - * bus. We need to ensure the master stays - * aligned, and that we are working in - * multiples of the bus widths. - */ - odd_bytes = lli_len % mbus->buswidth; - lli_len -= odd_bytes; - - } - - if (lli_len) { - /* - * Check against minimum bus alignment: - * Calculate actual transfer size in relation - * to bus width an get a maximum remainder of - * the smallest bus width - 1 - */ - /* FIXME: use round_down()? */ - tsize = lli_len / min(mbus->buswidth, - sbus->buswidth); - lli_len = tsize * min(mbus->buswidth, - sbus->buswidth); - - if (target_len != lli_len) { - dev_vdbg(&pl08x->adev->dev, - "%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n", - __func__, target_len, lli_len, txd->len); - } - - cctl = pl08x_cctl_bits(cctl, - bd.srcbus.buswidth, - bd.dstbus.buswidth, - tsize); - - dev_vdbg(&pl08x->adev->dev, - "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n", - __func__, lli_len, bd.remainder); - pl08x_fill_lli_for_desc(&bd, num_llis++, - lli_len, cctl); - total_bytes += lli_len; - } + tsize = lli_len / min(mbus->buswidth, sbus->buswidth); + lli_len = tsize * min(mbus->buswidth, sbus->buswidth); - if (odd_bytes) { - /* - * Creep past the boundary, maintaining - * master alignment - */ - int j; - for (j = 0; (j < mbus->buswidth) - && (bd.remainder); j++) { - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single byte (remain 0x%08zx)\n", - __func__, bd.remainder); - pl08x_fill_lli_for_desc(&bd, - num_llis++, 1, cctl); - total_bytes++; - } - } + dev_vdbg(&pl08x->adev->dev, + "%s fill lli with single lli chunk of " + "size 0x%08zx (remainder 0x%08zx)\n", + __func__, lli_len, bd.remainder); + + cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, + bd.dstbus.buswidth, tsize); + pl08x_fill_lli_for_desc(&bd, num_llis++, lli_len, cctl); + total_bytes += lli_len; } /* @@ -811,6 +703,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, total_bytes++; } } + if (total_bytes != txd->len) { dev_err(&pl08x->adev->dev, "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n", diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index cd8f629da58f..ecd17f581e71 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -77,13 +77,11 @@ struct pl08x_channel_data { * @addr: current address * @maxwidth: the maximum width of a transfer on this bus * @buswidth: the width of this bus in bytes: 1, 2 or 4 - * @fill_bytes: bytes required to fill to the next bus memory boundary */ struct pl08x_bus_data { dma_addr_t addr; u8 maxwidth; u8 buswidth; - size_t fill_bytes; }; /** -- cgit v1.2.3 From fa6a940bf129c5417b602a4cdfe88b3dbd8e5898 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:38 +0530 Subject: dmaengine/amba-pl08x: max_bytes_per_lli is TRANSFER_SIZE * src_width (not MIN(width)) max_bytes_per_lli = bd.srcbus.buswidth * PL080_CONTROL_TRANSFER_SIZE_MASK; This is confirmed by ARM support guys. Below is summary of mail exchange with them: [Viresh] What is the total data to be transferred in case source and destination bus widths are different. Suppose, source bus width is 2 bytes and destination is 4 bytes. Now in order to transfer 80 bytes, what should be value of TransferSize field in control reg: 40? or 20?. [David from ARM] The value that is programmed into the TransferSize field should be the number of transfers needed to achieve the required data transfer. So, to transfer 80 bytes, with a Source Width of 2, the TransferSize field = should be programmed with: Total transfer size ------------------- = 40 [Viresh] Will this change if source is 4 bytes and dest is 2? [David] Yes - the calculation then becomes: Total transfer size ------------------- =20 Also, max_bytes_per_lli must be calculated after fixing src and dest widths not before that. So move this code to the correct place. This patch also removes max_bytes_per_lli from earlier print message, as till that point max_bytes_per_lli is unknown. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index be9a1c718f9a..e5930d512b00 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -604,23 +604,17 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, bd.srcbus.buswidth = bd.srcbus.maxwidth; bd.dstbus.buswidth = bd.dstbus.maxwidth; - /* - * Bytes transferred == tsize * MIN(buswidths), not max(buswidths) - */ - max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) * - PL080_CONTROL_TRANSFER_SIZE_MASK; - /* We need to count this down to zero */ bd.remainder = txd->len; pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); - dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu llimax=%zu\n", + dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n", bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "", bd.srcbus.buswidth, bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "", bd.dstbus.buswidth, - bd.remainder, max_bytes_per_lli); + bd.remainder); dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n", mbus == &bd.srcbus ? "src" : "dst", sbus == &bd.srcbus ? "src" : "dst"); @@ -660,6 +654,10 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, sbus->buswidth = 1; } + /* Bytes transferred = tsize * src width, not MIN(buswidths) */ + max_bytes_per_lli = bd.srcbus.buswidth * + PL080_CONTROL_TRANSFER_SIZE_MASK; + /* * Make largest possible LLIs until less than one bus * width left -- cgit v1.2.3 From 03af500f743f486648fc8afc38593e9844411945 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:39 +0530 Subject: dmaengine/amba-pl08x: Add prep_single_byte_llis() routine Code for creating single byte llis is present at several places. Create a routine to avoid code redundancy. Also, we don't need one lli per single byte transfer, we can have single lli to do all single byte transfer. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 61 ++++++++++++++++++++++++++---------------------- 1 file changed, 33 insertions(+), 28 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index e5930d512b00..45d8a5d5bccd 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -559,6 +559,14 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, bd->remainder -= len; } +static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd, + u32 *cctl, u32 len, int num_llis, size_t *total_bytes) +{ + *cctl = pl08x_cctl_bits(*cctl, 1, 1, len); + pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl); + (*total_bytes) += len; +} + /* * This fills in the table of LLIs for the transfer descriptor * Note that we assume we never have to change the burst sizes @@ -570,7 +578,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_bus_data *mbus, *sbus; struct pl08x_lli_build_data bd; int num_llis = 0; - u32 cctl; + u32 cctl, early_bytes = 0; size_t max_bytes_per_lli, total_bytes = 0; struct pl08x_lli *llis_va; @@ -619,29 +627,27 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, mbus == &bd.srcbus ? "src" : "dst", sbus == &bd.srcbus ? "src" : "dst"); - if (txd->len < mbus->buswidth) { - /* Less than a bus width available - send as single bytes */ - while (bd.remainder) { - dev_vdbg(&pl08x->adev->dev, - "%s single byte LLIs for a transfer of " - "less than a bus width (remain 0x%08x)\n", - __func__, bd.remainder); - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); - total_bytes++; - } - } else { - /* Make one byte LLIs until master bus is aligned */ - while ((mbus->addr) % (mbus->buswidth)) { - dev_vdbg(&pl08x->adev->dev, - "%s adjustment lli for less than bus width " - "(remain 0x%08x)\n", - __func__, bd.remainder); - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); - total_bytes++; - } + /* + * Send byte by byte for following cases + * - Less than a bus width available + * - until master bus is aligned + */ + if (bd.remainder < mbus->buswidth) + early_bytes = bd.remainder; + else if ((mbus->addr) % (mbus->buswidth)) { + early_bytes = mbus->buswidth - (mbus->addr) % (mbus->buswidth); + if ((bd.remainder - early_bytes) < mbus->buswidth) + early_bytes = bd.remainder; + } + + if (early_bytes) { + dev_vdbg(&pl08x->adev->dev, "%s byte width LLIs " + "(remain 0x%08x)\n", __func__, bd.remainder); + prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++, + &total_bytes); + } + if (bd.remainder) { /* * Master now aligned * - if slave is not then we must set its width down @@ -692,13 +698,12 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* * Send any odd bytes */ - while (bd.remainder) { - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); + if (bd.remainder) { dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single odd byte (remain %zu)\n", + "%s align with boundary, send odd bytes (remain %zu)\n", __func__, bd.remainder); - pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); - total_bytes++; + prep_byte_width_lli(&bd, &cctl, bd.remainder, + num_llis++, &total_bytes); } } -- cgit v1.2.3 From e0719165801fad04073e7dcd90e4afd02aba3fb7 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:40 +0530 Subject: dmaengine/amba-pl08x: Align lli_len to max(src.width, dst.width) Currently lli_len is aligned to min of two widths, which looks to be incorrect. Instead it should be aligned to max of both widths. Lets say, total_size = 441 bytes MIN: lets check if min() suits or not: CASE 1: srcwidth = 1, dstwidth = 4 min(src, dst) = 1 i.e. We program transfer size in control reg to 441. Now, till 440 bytes everything is fine, but on the last byte DMAC can't transfer 1 byte to dst, as its width is 4. CASE 2: srcwidth = 4, dstwidth = 1 min(src, dst) = 1 i.e. we program transfer size in control reg to 110 (data transferred = 110 * srcwidth). So, here too 1 byte is left, but on the source side. MAX: Lets check if max() suits or not: CASE 3: srcwidth = 1, dstwidth = 4 max(src, dst) = 4 Aligned size is 440 i.e. We program transfer size in control reg to 440. Now, all 440 bytes will be transferred without any issues. CASE 4: srcwidth = 4, dstwidth = 1 max(src, dst) = 4 Aligned size is 440 i.e. We program transfer size in control reg to 110 (data transferred = 110 * srcwidth). Now, also all 440 bytes will be transferred without any issues. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 45d8a5d5bccd..4bcf6036f35d 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -669,20 +669,22 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * width left */ while (bd.remainder > (mbus->buswidth - 1)) { - size_t lli_len, tsize; + size_t lli_len, tsize, width; /* * If enough left try to send max possible, * otherwise try to send the remainder */ lli_len = min(bd.remainder, max_bytes_per_lli); + /* - * Check against minimum bus alignment: Calculate actual + * Check against maximum bus alignment: Calculate actual * transfer size in relation to bus width and get a - * maximum remainder of the smallest bus width - 1 + * maximum remainder of the highest bus width - 1 */ - tsize = lli_len / min(mbus->buswidth, sbus->buswidth); - lli_len = tsize * min(mbus->buswidth, sbus->buswidth); + width = max(mbus->buswidth, sbus->buswidth); + lli_len = (lli_len / width) * width; + tsize = lli_len / bd.srcbus.buswidth; dev_vdbg(&pl08x->adev->dev, "%s fill lli with single lli chunk of " -- cgit v1.2.3 From 036f05fd6dcdb6a6b9e55703cb663112fa4c4e42 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:41 +0530 Subject: dmaengine/amba-pl08x: Choose peripheral bus as master bus When we have DMA transfers between peripheral and memory, then we shouldn't reduce width of peripheral at all, as that may be a strict requirement. But we can always reduce width of memory access, with some compromise in performance. Thus, we must select peripheral as master and not memory. Also this rearranges code to make it shorter. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 4bcf6036f35d..f70aa574c58f 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -499,34 +499,24 @@ struct pl08x_lli_build_data { * byte data), slave is still not aligned, then its width will be reduced to * BYTE. * - prefers the destination bus if both available - * - if fixed address on one bus the other will be chosen + * - prefers bus with fixed address (i.e. peripheral) */ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl) { if (!(cctl & PL080_CONTROL_DST_INCR)) { - *mbus = &bd->srcbus; - *sbus = &bd->dstbus; - } else if (!(cctl & PL080_CONTROL_SRC_INCR)) { *mbus = &bd->dstbus; *sbus = &bd->srcbus; + } else if (!(cctl & PL080_CONTROL_SRC_INCR)) { + *mbus = &bd->srcbus; + *sbus = &bd->dstbus; } else { - if (bd->dstbus.buswidth == 4) { - *mbus = &bd->dstbus; - *sbus = &bd->srcbus; - } else if (bd->srcbus.buswidth == 4) { - *mbus = &bd->srcbus; - *sbus = &bd->dstbus; - } else if (bd->dstbus.buswidth == 2) { + if (bd->dstbus.buswidth >= bd->srcbus.buswidth) { *mbus = &bd->dstbus; *sbus = &bd->srcbus; - } else if (bd->srcbus.buswidth == 2) { + } else { *mbus = &bd->srcbus; *sbus = &bd->dstbus; - } else { - /* bd->srcbus.buswidth == 1 */ - *mbus = &bd->dstbus; - *sbus = &bd->srcbus; } } } -- cgit v1.2.3 From 0a2356572b1910cc977f4ccf3c9ee1ecab08327a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:42 +0530 Subject: dmaengine/amba-pl08x: Pass flow controller information with slave channel data At least, on SPEAr platforms there is one peripheral, JPEG, which can be flow controller for DMA transfer. Currently DMA controller driver didn't support peripheral flow controller configurations. This patch adds device_fc field in struct pl08x_channel_data, which will be used only for slave transfers and is not used in case of mem2mem transfers. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 61 ++++++++++++++++++++++++++++++++++++++++------ include/linux/amba/pl08x.h | 4 +++ 2 files changed, 57 insertions(+), 8 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index f70aa574c58f..a59c3c47286c 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -66,11 +66,6 @@ * after the final transfer signalled by LBREQ or LSREQ. The DMAC * will then move to the next LLI entry. * - * Only the former works sanely with scatter lists, so we only implement - * the DMAC flow control method. However, peripherals which use the LBREQ - * and LSREQ signals (eg, MMCI) are unable to use this mode, which through - * these hardware restrictions prevents them from using scatter DMA. - * * Global TODO: * - Break out common code from arch/arm/mach-s3c64xx and share */ @@ -617,6 +612,49 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, mbus == &bd.srcbus ? "src" : "dst", sbus == &bd.srcbus ? "src" : "dst"); + /* + * Zero length is only allowed if all these requirements are met: + * - flow controller is peripheral. + * - src.addr is aligned to src.width + * - dst.addr is aligned to dst.width + * + * sg_len == 1 should be true, as there can be two cases here: + * - Memory addresses are contiguous and are not scattered. Here, Only + * one sg will be passed by user driver, with memory address and zero + * length. We pass this to controller and after the transfer it will + * receive the last burst request from peripheral and so transfer + * finishes. + * + * - Memory addresses are scattered and are not contiguous. Here, + * Obviously as DMA controller doesn't know when a lli's transfer gets + * over, it can't load next lli. So in this case, there has to be an + * assumption that only one lli is supported. Thus, we can't have + * scattered addresses. + */ + if (!bd.remainder) { + u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >> + PL080_CONFIG_FLOW_CONTROL_SHIFT; + if (!((fc >= PL080_FLOW_SRC2DST_DST) && + (fc <= PL080_FLOW_SRC2DST_SRC))) { + dev_err(&pl08x->adev->dev, "%s sg len can't be zero", + __func__); + return 0; + } + + if ((bd.srcbus.addr % bd.srcbus.buswidth) || + (bd.srcbus.addr % bd.srcbus.buswidth)) { + dev_err(&pl08x->adev->dev, + "%s src & dst address must be aligned to src" + " & dst width if peripheral is flow controller", + __func__); + return 0; + } + + cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, + bd.dstbus.buswidth, 0); + pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl); + } + /* * Send byte by byte for following cases * - Less than a bus width available @@ -1250,7 +1288,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; - int ret; + int ret, tmp; /* * Current implementation ASSUMES only one sg @@ -1284,12 +1322,10 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( txd->len = sgl->length; if (direction == DMA_TO_DEVICE) { - txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl = plchan->dst_cctl; txd->src_addr = sgl->dma_address; txd->dst_addr = plchan->dst_addr; } else if (direction == DMA_FROM_DEVICE) { - txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl = plchan->src_cctl; txd->src_addr = plchan->src_addr; txd->dst_addr = sgl->dma_address; @@ -1299,6 +1335,15 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } + if (plchan->cd->device_fc) + tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER_PER : + PL080_FLOW_PER2MEM_PER; + else + tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER : + PL080_FLOW_PER2MEM; + + txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT; + ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index ecd17f581e71..a22662c93981 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -47,6 +47,9 @@ enum { * @muxval: a number usually used to poke into some mux regiser to * mux in the signal to this channel * @cctl_opt: default options for the channel control register + * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave + * channels. Fill with 'true' if peripheral should be flow controller. Direction + * will be selected at Runtime. * @addr: source/target address in physical memory for this DMA channel, * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring @@ -65,6 +68,7 @@ struct pl08x_channel_data { int max_signal; u32 muxval; u32 cctl; + bool device_fc; dma_addr_t addr; bool circular_buffer; bool single; -- cgit v1.2.3 From 57001a606f845ce2eda21a0f23e6aab20ee0cb04 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 5 Aug 2011 15:32:45 +0530 Subject: dmaengine/amba-pl08x: Call pl08x_free_txd() instead of calling kfree() directly pl08x_prep_channel_resources() is calling kfree() directly for txd(). To maintain consistency in code call pl08x_free_txd() instead. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/dma') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index a59c3c47286c..849eab85514b 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1174,7 +1174,9 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, num_llis = pl08x_fill_llis_for_desc(pl08x, txd); if (!num_llis) { - kfree(txd); + spin_lock_irqsave(&plchan->lock, flags); + pl08x_free_txd(pl08x, txd); + spin_unlock_irqrestore(&plchan->lock, flags); return -EINVAL; } -- cgit v1.2.3 From 981ed70d8e4faf3689dbf3c48868a31d5b004d7a Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 18 Aug 2011 16:50:51 +0200 Subject: dmatest: make dmatest threads freezable Making dmatest threads freezable allows its use for system PM testing. Signed-off-by: Guennadi Liakhovetski Acked-by: Dan Williams Signed-off-by: Vinod Koul --- drivers/dma/dmatest.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index accc18441b16..eb1d8641cf5c 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -251,6 +252,7 @@ static int dmatest_func(void *data) int i; thread_name = current->comm; + set_freezable_with_signal(); ret = -ENOMEM; @@ -305,7 +307,8 @@ static int dmatest_func(void *data) dma_addr_t dma_srcs[src_cnt]; dma_addr_t dma_dsts[dst_cnt]; struct completion cmp; - unsigned long tmo = msecs_to_jiffies(timeout); + unsigned long start, tmo, end = 0 /* compiler... */; + bool reload = true; u8 align = 0; total_tests++; @@ -404,7 +407,17 @@ static int dmatest_func(void *data) } dma_async_issue_pending(chan); - tmo = wait_for_completion_timeout(&cmp, tmo); + do { + start = jiffies; + if (reload) + end = start + msecs_to_jiffies(timeout); + else if (end <= start) + end = start + 1; + tmo = wait_for_completion_interruptible_timeout(&cmp, + end - start); + reload = try_to_freeze(); + } while (tmo == -ERESTARTSYS); + status = dma_async_is_tx_complete(chan, cookie, NULL, NULL); if (tmo == 0) { -- cgit v1.2.3 From 73eab978ad6934499b83ecc920d470fe99c5e54d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 25 Aug 2011 11:03:35 +0200 Subject: dmaengine i.MX SDMA: lock channel 0 channel0 of the sdma engine is the configuration channel. It is a shared resource and thus must be protected by a mutex. Signed-off-by: Sascha Hauer Signed-off-by: Vinod Koul --- drivers/dma/imx-sdma.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 7bd7e98548cd..f50c87c303dd 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -318,6 +318,7 @@ struct sdma_engine { dma_addr_t context_phys; struct dma_device dma_device; struct clk *clk; + struct mutex channel_0_lock; struct sdma_script_start_addrs *script_addrs; }; @@ -415,11 +416,15 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size, dma_addr_t buf_phys; int ret; + mutex_lock(&sdma->channel_0_lock); + buf_virt = dma_alloc_coherent(NULL, size, &buf_phys, GFP_KERNEL); - if (!buf_virt) - return -ENOMEM; + if (!buf_virt) { + ret = -ENOMEM; + goto err_out; + } bd0->mode.command = C0_SETPM; bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD; @@ -433,6 +438,9 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size, dma_free_coherent(NULL, size, buf_virt, buf_phys); +err_out: + mutex_unlock(&sdma->channel_0_lock); + return ret; } @@ -656,6 +664,8 @@ static int sdma_load_context(struct sdma_channel *sdmac) dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", sdmac->event_mask0); dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", sdmac->event_mask1); + mutex_lock(&sdma->channel_0_lock); + memset(context, 0, sizeof(*context)); context->channel_state.pc = load_address; @@ -676,6 +686,8 @@ static int sdma_load_context(struct sdma_channel *sdmac) ret = sdma_run_channel(&sdma->channel[0]); + mutex_unlock(&sdma->channel_0_lock); + return ret; } @@ -1274,6 +1286,8 @@ static int __init sdma_probe(struct platform_device *pdev) if (!sdma) return -ENOMEM; + mutex_init(&sdma->channel_0_lock); + sdma->dev = &pdev->dev; iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- cgit v1.2.3 From 36e2f21ab481b3d6bd31b99e1de669fbbac4bd0e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 25 Aug 2011 11:03:36 +0200 Subject: dmaengine i.MX SDMA: set firmware scripts addresses to negative value initially If we do not have a firmare script for a given transfer, the setup of this channel must fail. For this the script addresses have to be < 0 initially, not 0. Signed-off-by: Sascha Hauer Signed-off-by: Vinod Koul --- drivers/dma/imx-sdma.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/dma') diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index f50c87c303dd..8abf8c190aad 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1281,6 +1281,7 @@ static int __init sdma_probe(struct platform_device *pdev) struct sdma_platform_data *pdata = pdev->dev.platform_data; int i; struct sdma_engine *sdma; + s32 *saddr_arr; sdma = kzalloc(sizeof(*sdma), GFP_KERNEL); if (!sdma) @@ -1324,6 +1325,11 @@ static int __init sdma_probe(struct platform_device *pdev) goto err_alloc; } + /* initially no scripts available */ + saddr_arr = (s32 *)sdma->script_addrs; + for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++) + saddr_arr[i] = -EINVAL; + if (of_id) pdev->id_entry = of_id->data; sdma->devtype = pdev->id_entry->driver_data; -- cgit v1.2.3 From 7b4b88e067d37cbbafd856121767f7e154294eb2 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 25 Aug 2011 11:03:37 +0200 Subject: dmaengine i.MX SDMA: use request_firmware_nowait The firmware blob may not be available when the driver probes. Instead of blocking the whole kernel use request_firmware_nowait() and continue without firmware. The ROM scripts can already be used then if available. For the devicetree case the ROM scripts are not available, still the probe function should not block. The driver will be unusable in this case, but we have no way of detecting this properly. The configuration of the dma channels will fail, so nothing bad should happen. Signed-off-by: Sascha Hauer Signed-off-by: Vinod Koul --- drivers/dma/imx-sdma.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 8abf8c190aad..b5cc27dc9a51 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1143,18 +1143,17 @@ static void sdma_add_scripts(struct sdma_engine *sdma, saddr_arr[i] = addr_arr[i]; } -static int __init sdma_get_firmware(struct sdma_engine *sdma, - const char *fw_name) +static void sdma_load_firmware(const struct firmware *fw, void *context) { - const struct firmware *fw; + struct sdma_engine *sdma = context; const struct sdma_firmware_header *header; - int ret; const struct sdma_script_start_addrs *addr; unsigned short *ram_code; - ret = request_firmware(&fw, fw_name, sdma->dev); - if (ret) - return ret; + if (!fw) { + dev_err(sdma->dev, "firmware not found\n"); + return; + } if (fw->size < sizeof(*header)) goto err_firmware; @@ -1184,6 +1183,16 @@ static int __init sdma_get_firmware(struct sdma_engine *sdma, err_firmware: release_firmware(fw); +} + +static int __init sdma_get_firmware(struct sdma_engine *sdma, + const char *fw_name) +{ + int ret; + + ret = request_firmware_nowait(THIS_MODULE, + FW_ACTION_HOTPLUG, fw_name, sdma->dev, + GFP_KERNEL, sdma, sdma_load_firmware); return ret; } -- cgit v1.2.3