From a06498297d233fd5074da14f25e72c2f104561d3 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 28 Jun 2016 11:02:28 +0530 Subject: clk: imx: vf610: Disable automatic clock gating for lpuart in LPSTOP mode In order to allow wake support in STOP sleep mode, clocks are needed. Use imx_clk_gate2_cgr to disable automatic clock gating in low power mode STOP. This allows to enable wake by UART using: echo enabled > /sys/class/tty/ttyLP0/power/wakeup However, if wake is not enabled, the driver should disable the clocks explicitly to save power. Signed-off-by: Stefan Agner Signed-off-by: Bhuvanchandra DV Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/20160628053235.5114-3-bhuvanchandra.dv@toradex.com --- drivers/clk/imx/clk-vf610.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/clk/imx') diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c index 3a1f24475ee4..0476353ab423 100644 --- a/drivers/clk/imx/clk-vf610.c +++ b/drivers/clk/imx/clk-vf610.c @@ -315,12 +315,12 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7)); - clk[VF610_CLK_UART0] = imx_clk_gate2("uart0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(7)); - clk[VF610_CLK_UART1] = imx_clk_gate2("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8)); - clk[VF610_CLK_UART2] = imx_clk_gate2("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9)); - clk[VF610_CLK_UART3] = imx_clk_gate2("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10)); - clk[VF610_CLK_UART4] = imx_clk_gate2("uart4", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(9)); - clk[VF610_CLK_UART5] = imx_clk_gate2("uart5", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(10)); + clk[VF610_CLK_UART0] = imx_clk_gate2_cgr("uart0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(7), 0x2); + clk[VF610_CLK_UART1] = imx_clk_gate2_cgr("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8), 0x2); + clk[VF610_CLK_UART2] = imx_clk_gate2_cgr("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9), 0x2); + clk[VF610_CLK_UART3] = imx_clk_gate2_cgr("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10), 0x2); + clk[VF610_CLK_UART4] = imx_clk_gate2_cgr("uart4", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(9), 0x2); + clk[VF610_CLK_UART5] = imx_clk_gate2_cgr("uart5", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(10), 0x2); clk[VF610_CLK_I2C0] = imx_clk_gate2("i2c0", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(6)); clk[VF610_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(7)); -- cgit v1.2.3