From cd52c2a4b5c43631e429d06dce12e08b0cab477f Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 30 Mar 2015 10:59:52 +0100 Subject: clk: add support for clocks provided by SCP(System Control Processor) On some ARM based systems, a separate Cortex-M based System Control Processor(SCP) provides the overall power, clock, reset and system control. System Control and Power Interface(SCPI) Message Protocol is defined for the communication between the Application Cores(AP) and the SCP. This patch adds support for the clocks provided by SCP using SCPI protocol. Signed-off-by: Sudeep Holla Reviewed-by: Stephen Boyd Cc: Mike Turquette Cc: Liviu Dudau Cc: Lorenzo Pieralisi Cc: Jon Medhurst (Tixy) Cc: linux-clk@vger.kernel.org --- drivers/clk/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/clk/Kconfig') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 42f7120ca9ce..4aec54b90331 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -59,6 +59,16 @@ config COMMON_CLK_RK808 clocked at 32KHz each. Clkout1 is always on, Clkout2 can off by control register. +config COMMON_CLK_SCPI + tristate "Clock driver controlled via SCPI interface" + depends on ARM_SCPI_PROTOCOL || COMPILE_TEST + ---help--- + This driver provides support for clocks that are controlled + by firmware that implements the SCPI interface. + + This driver uses SCPI Message Protocol to interact with the + firmware providing all the clock controls. + config COMMON_CLK_SI5351 tristate "Clock driver for SiLabs 5351A/B/C" depends on I2C -- cgit v1.2.3