From 6b2b171a774af256082635b53ac387b1613b7b4c Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Jun 2009 02:53:50 -0700 Subject: x86/acpi: acpi_parse_madt_ioapic_entries: remove redundant braces We don't put braces around a single statement. Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/acpi/boot.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6b8ca3a0285d..ce31c1af854f 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1179,9 +1179,8 @@ static int __init acpi_parse_madt_ioapic_entries(void) * If MPS is present, it will handle them, * otherwise the system will stay in PIC mode */ - if (acpi_disabled || acpi_noirq) { + if (acpi_disabled || acpi_noirq) return -ENODEV; - } if (!cpu_has_apic) return -ENODEV; -- cgit v1.2.3 From 2f210deba9887dd9143b63b217506f1ac152e91c Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Jun 2009 02:55:22 -0700 Subject: x86/ioapic.c: ioapic_modify_irq is too large to inline If ioapic_modify_irq() is marked inline, it gets inlined several times. Un-inlining it saves around 200 bytes in .text for me. Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/apic/io_apic.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 90b5e6efa938..82271eb87bb0 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -556,9 +556,9 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node, add_pin_to_irq_node(cfg, node, newapic, newpin); } -static inline void io_apic_modify_irq(struct irq_cfg *cfg, - int mask_and, int mask_or, - void (*final)(struct irq_pin_list *entry)) +static void io_apic_modify_irq(struct irq_cfg *cfg, + int mask_and, int mask_or, + void (*final)(struct irq_pin_list *entry)) { int pin; struct irq_pin_list *entry; -- cgit v1.2.3 From 890aeacf64c55a7ada7054a140d249ab13899f2d Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Jun 2009 02:57:43 -0700 Subject: x86/ioapic.c: unify __mask_IO_APIC_irq() The main difference between 32 and 64-bit __mask_IO_APIC_irq() does a readback from the I/O APIC to synchronize it. If there's a hardware requirement to do a readback sync after updating an APIC register, then it will be a hardware requrement regardless of whether the kernel is compiled 32 or 64-bit. Unify __mask_IO_APIC_irq() using the 64-bit version which always syncs with io_apic_sync(). Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/apic/io_apic.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 82271eb87bb0..f8aa5461071b 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -580,7 +580,6 @@ static void __unmask_IO_APIC_irq(struct irq_cfg *cfg) io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL); } -#ifdef CONFIG_X86_64 static void io_apic_sync(struct irq_pin_list *entry) { /* @@ -596,12 +595,8 @@ static void __mask_IO_APIC_irq(struct irq_cfg *cfg) { io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync); } -#else /* CONFIG_X86_32 */ -static void __mask_IO_APIC_irq(struct irq_cfg *cfg) -{ - io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, NULL); -} +#ifdef CONFIG_X86_32 static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg) { io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER, -- cgit v1.2.3 From 916a0fe739f151664f7f07b42543ae6fd4caec49 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Jun 2009 03:00:22 -0700 Subject: x86/ioapic.c: remove #ifdef for 82093AA workaround While no 64-bit hardware will have a version 0x11 I/O APIC which needs the level/edge bug workaround, that's not a particular reason to use CONFIG_X86_32 to #ifdef the code out. Most 32-bit machines will no longer need the workaround either, so the test to see whether it is necessary should be more fine-grained than "32-bit=yes, 64-bit=no". (Also fix formatting of block comment.) Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/apic/io_apic.c | 47 +++++++++++++++++------------------------- 1 file changed, 19 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index f8aa5461071b..1a3414442583 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -596,7 +596,6 @@ static void __mask_IO_APIC_irq(struct irq_cfg *cfg) io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync); } -#ifdef CONFIG_X86_32 static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg) { io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER, @@ -608,7 +607,6 @@ static void __unmask_and_level_IO_APIC_irq(struct irq_cfg *cfg) io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, IO_APIC_REDIR_LEVEL_TRIGGER, NULL); } -#endif /* CONFIG_X86_32 */ static void mask_IO_APIC_irq_desc(struct irq_desc *desc) { @@ -2510,11 +2508,8 @@ atomic_t irq_mis_count; static void ack_apic_level(unsigned int irq) { struct irq_desc *desc = irq_to_desc(irq); - -#ifdef CONFIG_X86_32 unsigned long v; int i; -#endif struct irq_cfg *cfg; int do_unmask_irq = 0; @@ -2527,31 +2522,28 @@ static void ack_apic_level(unsigned int irq) } #endif -#ifdef CONFIG_X86_32 /* - * It appears there is an erratum which affects at least version 0x11 - * of I/O APIC (that's the 82093AA and cores integrated into various - * chipsets). Under certain conditions a level-triggered interrupt is - * erroneously delivered as edge-triggered one but the respective IRR - * bit gets set nevertheless. As a result the I/O unit expects an EOI - * message but it will never arrive and further interrupts are blocked - * from the source. The exact reason is so far unknown, but the - * phenomenon was observed when two consecutive interrupt requests - * from a given source get delivered to the same CPU and the source is - * temporarily disabled in between. - * - * A workaround is to simulate an EOI message manually. We achieve it - * by setting the trigger mode to edge and then to level when the edge - * trigger mode gets detected in the TMR of a local APIC for a - * level-triggered interrupt. We mask the source for the time of the - * operation to prevent an edge-triggered interrupt escaping meanwhile. - * The idea is from Manfred Spraul. --macro - */ + * It appears there is an erratum which affects at least version 0x11 + * of I/O APIC (that's the 82093AA and cores integrated into various + * chipsets). Under certain conditions a level-triggered interrupt is + * erroneously delivered as edge-triggered one but the respective IRR + * bit gets set nevertheless. As a result the I/O unit expects an EOI + * message but it will never arrive and further interrupts are blocked + * from the source. The exact reason is so far unknown, but the + * phenomenon was observed when two consecutive interrupt requests + * from a given source get delivered to the same CPU and the source is + * temporarily disabled in between. + * + * A workaround is to simulate an EOI message manually. We achieve it + * by setting the trigger mode to edge and then to level when the edge + * trigger mode gets detected in the TMR of a local APIC for a + * level-triggered interrupt. We mask the source for the time of the + * operation to prevent an edge-triggered interrupt escaping meanwhile. + * The idea is from Manfred Spraul. --macro + */ cfg = desc->chip_data; i = cfg->vector; - v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); -#endif /* * We must acknowledge the irq before we move it or the acknowledge will @@ -2593,7 +2585,7 @@ static void ack_apic_level(unsigned int irq) unmask_IO_APIC_irq_desc(desc); } -#ifdef CONFIG_X86_32 + /* Tail end of version 0x11 I/O APIC bug workaround */ if (!(v & (1 << (i & 0x1f)))) { atomic_inc(&irq_mis_count); spin_lock(&ioapic_lock); @@ -2601,7 +2593,6 @@ static void ack_apic_level(unsigned int irq) __unmask_and_level_IO_APIC_irq(cfg); spin_unlock(&ioapic_lock); } -#endif } #ifdef CONFIG_INTR_REMAP -- cgit v1.2.3 From 83c21bedf63ce92a2dd82ae2c7a96179b0aa4372 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Jun 2009 03:13:04 -0700 Subject: x86/ioapic.c: remove redundant declaration of irq_pin_list The structure is defined immediately below, so there's no need to forward declare it. Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/apic/io_apic.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 1a3414442583..ec52e0c045c4 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -116,8 +116,6 @@ static int __init parse_noapic(char *str) } early_param("noapic", parse_noapic); -struct irq_pin_list; - /* * This is performance-critical, we want to do it O(1) * -- cgit v1.2.3 From 8e13d697febc1ba17e70ed88789255c8bc25aa41 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Jun 2009 03:14:59 -0700 Subject: x86/ioapic.c: move lost comment to what seems like appropriate place The comment got separated from its subject, so move it to what appears to be the right place, and update to describe the current structure. Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/apic/io_apic.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index ec52e0c045c4..a097a773bc76 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -116,13 +116,6 @@ static int __init parse_noapic(char *str) } early_param("noapic", parse_noapic); -/* - * This is performance-critical, we want to do it O(1) - * - * the indexing order of this array favors 1:1 mappings - * between pins and IRQs. - */ - struct irq_pin_list { int apic, pin; struct irq_pin_list *next; @@ -137,6 +130,11 @@ static struct irq_pin_list *get_one_free_irq_2_pin(int node) return pin; } +/* + * This is performance-critical, we want to do it O(1) + * + * Most irqs are mapped 1:1 with pins. + */ struct irq_cfg { struct irq_pin_list *irq_2_pin; cpumask_var_t domain; -- cgit v1.2.3 From d8c52063ed85dda61b70bc05b90711478db5dc17 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Jun 2009 03:17:58 -0700 Subject: x86/ioapic.c: convert io_apic_level_ack_pending loop to normal for() loop Convert the unconventional loop in io_apic_level_ack_pending() to a conventional for() loop. Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/apic/io_apic.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index a097a773bc76..0d0401802d4f 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -410,13 +410,10 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg) unsigned long flags; spin_lock_irqsave(&ioapic_lock, flags); - entry = cfg->irq_2_pin; - for (;;) { + for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) { unsigned int reg; int pin; - if (!entry) - break; pin = entry->pin; reg = io_apic_read(entry->apic, 0x10 + pin*2); /* Is the remote IRR bit set? */ @@ -424,9 +421,6 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg) spin_unlock_irqrestore(&ioapic_lock, flags); return true; } - if (!entry->next) - break; - entry = entry->next; } spin_unlock_irqrestore(&ioapic_lock, flags); -- cgit v1.2.3 From 875e68ec32fc5495f3edf987aaae1c52306184b7 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Jun 2009 03:24:11 -0700 Subject: x86/ioapic.c: simplify add_pin_to_irq_node() Rather than duplicating the same alloc/init code twice, restructure the function to look for duplicates and then add an entry if none is found. This function is not performance critical; all but one of its callers are __init functions, and the non-__init caller is for PCI device setup. Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/apic/io_apic.c | 28 ++++++++-------------------- 1 file changed, 8 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 0d0401802d4f..d9e8f19088d4 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -490,34 +490,22 @@ static void ioapic_mask_entry(int apic, int pin) */ static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) { - struct irq_pin_list *entry; + struct irq_pin_list **entryp, *entry; - entry = cfg->irq_2_pin; - if (!entry) { - entry = get_one_free_irq_2_pin(node); - if (!entry) { - printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n", - apic, pin); - return; - } - cfg->irq_2_pin = entry; - entry->apic = apic; - entry->pin = pin; - return; - } - - while (entry->next) { + for (entryp = &cfg->irq_2_pin; + *entryp != NULL; + entryp = &(*entryp)->next) { + entry = *entryp; /* not again, please */ if (entry->apic == apic && entry->pin == pin) return; - - entry = entry->next; } - entry->next = get_one_free_irq_2_pin(node); - entry = entry->next; + entry = get_one_free_irq_2_pin(node); entry->apic = apic; entry->pin = pin; + + *entryp = entry; } /* -- cgit v1.2.3 From 535b64291a9d1ff8bc54642494a5fce27e1e1170 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Jun 2009 03:29:26 -0700 Subject: x86/ioapic.c: convert replace_pin_at_irq_node to conventional for() loop Use a conventional for() loop in replace_pin_at_irq_node(). Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/apic/io_apic.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index d9e8f19088d4..9386976b675b 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -515,10 +515,10 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node, int oldapic, int oldpin, int newapic, int newpin) { - struct irq_pin_list *entry = cfg->irq_2_pin; + struct irq_pin_list *entry; int replaced = 0; - while (entry) { + for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) { if (entry->apic == oldapic && entry->pin == oldpin) { entry->apic = newapic; entry->pin = newpin; @@ -526,7 +526,6 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node, /* every one is different, right? */ break; } - entry = entry->next; } /* why? call replace before add? */ -- cgit v1.2.3 From 4eea6fff612f54380dd642b045bf03ac0613fe3e Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Jun 2009 03:32:15 -0700 Subject: x86/ioapic.c: clean up replace_pin_at_irq_node logic and comments There's no need for a control variable in replace_pin_at_irq_node(); it can just return if it finds the old apic/pin to replace. If the loop terminates, then it didn't find the old apic/pin, so it can add the new ones. Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/apic/io_apic.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 9386976b675b..8245e62ed93f 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -512,25 +512,22 @@ static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin * Reroute an IRQ to a different pin. */ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node, - int oldapic, int oldpin, - int newapic, int newpin) + int oldapic, int oldpin, + int newapic, int newpin) { struct irq_pin_list *entry; - int replaced = 0; for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) { if (entry->apic == oldapic && entry->pin == oldpin) { entry->apic = newapic; entry->pin = newpin; - replaced = 1; /* every one is different, right? */ - break; + return; } } - /* why? call replace before add? */ - if (!replaced) - add_pin_to_irq_node(cfg, node, newapic, newpin); + /* old apic/pin didn't exist, so just add new ones */ + add_pin_to_irq_node(cfg, node, newapic, newpin); } static void io_apic_modify_irq(struct irq_cfg *cfg, -- cgit v1.2.3 From 638f2f8c52a92c15ebda9e50d84c1ab56fc42e42 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Jun 2009 03:37:52 -0700 Subject: x86/ioapic.c: convert __target_IO_APIC_irq to conventional for() loop Use a normal for() loop in __target_IO_APIC_irq(). Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/apic/io_apic.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 8245e62ed93f..17883cd82592 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2236,13 +2236,9 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq struct irq_pin_list *entry; u8 vector = cfg->vector; - entry = cfg->irq_2_pin; - for (;;) { + for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) { unsigned int reg; - if (!entry) - break; - apic = entry->apic; pin = entry->pin; /* @@ -2255,9 +2251,6 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq reg &= ~IO_APIC_REDIR_VECTOR_MASK; reg |= vector; io_apic_modify(apic, 0x10 + pin*2, reg); - if (!entry->next) - break; - entry = entry->next; } } -- cgit v1.2.3 From e25371d60cb06a44d7a32d7966ab9bfbeacb9390 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Jun 2009 03:49:01 -0700 Subject: x86/ioapic.c: unify ioapic_retrigger_irq() The 32 and 64-bit versions of ioapic_retrigger_irq() are identical except the 64-bit one takes vector_lock. vector_lock is defined and used on 32-bit too, so just use a common ioapic_retrigger_irq(). Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/apic/io_apic.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 17883cd82592..cf51b0b58c56 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2178,7 +2178,6 @@ static unsigned int startup_ioapic_irq(unsigned int irq) return was_pending; } -#ifdef CONFIG_X86_64 static int ioapic_retrigger_irq(unsigned int irq) { @@ -2191,14 +2190,6 @@ static int ioapic_retrigger_irq(unsigned int irq) return 1; } -#else -static int ioapic_retrigger_irq(unsigned int irq) -{ - apic->send_IPI_self(irq_cfg(irq)->vector); - - return 1; -} -#endif /* * Level and edge triggered IO-APIC interrupts need different handling, -- cgit v1.2.3 From 25f6e89bedd29cc49bfa0d55497e91a671b9ae6e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 30 Jul 2009 23:21:18 +0200 Subject: x86: Remove superfluous NULL pointer check in destroy_irq() This takes care of the following entry from Dan's list: arch/x86/kernel/apic/io_apic.c +3241 destroy_irq(11) warning: variable derefenced before check 'desc' Reported-by: Dan Carpenter Signed-off-by: Bartlomiej Zolnierkiewicz Cc: Jonathan Corbet Cc: Eugene Teo Cc: Julia Lawall LKML-Reference: <200907302321.19086.bzolnier@gmail.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index cf51b0b58c56..7e92a9212fd7 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3185,8 +3185,7 @@ void destroy_irq(unsigned int irq) cfg = desc->chip_data; dynamic_irq_cleanup(irq); /* connect back irq_cfg */ - if (desc) - desc->chip_data = cfg; + desc->chip_data = cfg; free_irte(irq); spin_lock_irqsave(&vector_lock, flags); -- cgit v1.2.3 From 2977fb3ffc8493a2f4f0a362e8660a6cde9f1bb9 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 1 Aug 2009 11:47:59 +0400 Subject: x86, ioapic: Introduce for_each_irq_pin() helper This allow us to save a few lines of code. Signed-off-by: Cyrill Gorcunov Cc: yinghai@kernel.org LKML-Reference: <20090801075435.597863129@openvz.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 43 +++++++++++++++--------------------------- 1 file changed, 15 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 7e92a9212fd7..ffd8fdfcbe4c 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -66,6 +66,8 @@ #include #define __apicdebuginit(type) static type __init +#define for_each_irq_pin(entry, head) \ + for (entry = head; entry; entry = entry->next) /* * Is the SiS APIC rmw bug present ? @@ -410,7 +412,7 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg) unsigned long flags; spin_lock_irqsave(&ioapic_lock, flags); - for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) { + for_each_irq_pin(entry, cfg->irq_2_pin) { unsigned int reg; int pin; @@ -490,22 +492,21 @@ static void ioapic_mask_entry(int apic, int pin) */ static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) { - struct irq_pin_list **entryp, *entry; + struct irq_pin_list **last, *entry; - for (entryp = &cfg->irq_2_pin; - *entryp != NULL; - entryp = &(*entryp)->next) { - entry = *entryp; - /* not again, please */ + /* don't allow duplicates */ + last = &cfg->irq_2_pin; + for_each_irq_pin(entry, cfg->irq_2_pin) { if (entry->apic == apic && entry->pin == pin) return; + last = &entry->next; } entry = get_one_free_irq_2_pin(node); entry->apic = apic; entry->pin = pin; - *entryp = entry; + *last = entry; } /* @@ -517,7 +518,7 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node, { struct irq_pin_list *entry; - for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) { + for_each_irq_pin(entry, cfg->irq_2_pin) { if (entry->apic == oldapic && entry->pin == oldpin) { entry->apic = newapic; entry->pin = newpin; @@ -537,7 +538,7 @@ static void io_apic_modify_irq(struct irq_cfg *cfg, int pin; struct irq_pin_list *entry; - for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) { + for_each_irq_pin(entry, cfg->irq_2_pin) { unsigned int reg; pin = entry->pin; reg = io_apic_read(entry->apic, 0x10 + pin * 2); @@ -1669,12 +1670,8 @@ __apicdebuginit(void) print_IO_APIC(void) if (!entry) continue; printk(KERN_DEBUG "IRQ%d ", irq); - for (;;) { + for_each_irq_pin(entry, cfg->irq_2_pin) printk("-> %d:%d", entry->apic, entry->pin); - if (!entry->next) - break; - entry = entry->next; - } printk("\n"); } @@ -2227,7 +2224,7 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq struct irq_pin_list *entry; u8 vector = cfg->vector; - for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) { + for_each_irq_pin(entry, cfg->irq_2_pin) { unsigned int reg; apic = entry->apic; @@ -2556,20 +2553,10 @@ static void ack_apic_level(unsigned int irq) #ifdef CONFIG_INTR_REMAP static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) { - int apic, pin; struct irq_pin_list *entry; - entry = cfg->irq_2_pin; - for (;;) { - - if (!entry) - break; - - apic = entry->apic; - pin = entry->pin; - io_apic_eoi(apic, pin); - entry = entry->next; - } + for_each_irq_pin(entry, cfg->irq_2_pin) + io_apic_eoi(entry->apic, entry->pin); } static void -- cgit v1.2.3 From a7428cd2ef77734465e36bceb43290e37e2a97c6 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 1 Aug 2009 11:48:00 +0400 Subject: x86, ioapic: Throw BUG instead of NULL dereference Instead of plain NULL deref we better throw error message with a backtrace. Actually we need more gracious error handling here. Meanwhile leave it as is. Signed-off-by: Cyrill Gorcunov Cc: yinghai@kernel.org LKML-Reference: <20090801075435.769301745@openvz.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index ffd8fdfcbe4c..2a145d3a8375 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -503,6 +503,10 @@ static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin } entry = get_one_free_irq_2_pin(node); + if (!entry) { + printk(KERN_ERR "can not alloc irq_pin_list\n"); + BUG_ON(1); + } entry->apic = apic; entry->pin = pin; -- cgit v1.2.3 From 9910887af84e33ba98fd6792029470ae80166208 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Thu, 23 Jul 2009 00:52:59 +0400 Subject: x86, apic: Drop redundant bit assignment cpu_has_apic has already investigated boot_cpu_data X86_FEATURE_APIC bit for being clear if condition is triggered. So there is no need to clear this bit second time. Signed-off-by: Cyrill Gorcuno v Cc: "Maciej W. Rozycki" LKML-Reference: <20090722205259.GE15805@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 0a1c2830ec66..0b021c56e822 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1651,7 +1651,6 @@ int __init APIC_init_uniprocessor(void) APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { pr_err("BIOS bug, local APIC 0x%x not detected!...\n", boot_cpu_physical_apicid); - clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); return -1; } #endif -- cgit v1.2.3 From ce69a784504222c3ab6f1b3c357d09ec5772127a Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Mon, 20 Jul 2009 15:24:17 +0300 Subject: x86/apic: Enable x2APIC without interrupt remapping under KVM KVM would like to provide x2APIC interface to a guest without emulating interrupt remapping device. The reason KVM prefers guest to use x2APIC is that x2APIC interface is better virtualizable and provides better performance than mmio xAPIC interface: - msr exits are faster than mmio (no page table walk, emulation) - no need to read back ICR to look at the busy bit - one 64 bit ICR write instead of two 32 bit writes - shared code with the Hyper-V paravirt interface Included patch changes x2APIC enabling logic to enable it even if IR initialization failed, but kernel runs under KVM and no apic id is greater than 255 (if there is one spec requires BIOS to move to x2apic mode before starting an OS). -v2: fix build -v3: fix bug causing compiler warning Signed-off-by: Gleb Natapov Acked-by: Suresh Siddha Cc: Sheng Yang Cc: "avi@redhat.com" LKML-Reference: <20090720122417.GR5638@redhat.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 7 ++++ arch/x86/kernel/apic/apic.c | 83 +++++++++++++++++++++++------------------ arch/x86/kernel/apic/probe_64.c | 6 +-- 3 files changed, 56 insertions(+), 40 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index bb7d47925847..586b7adb8e53 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -183,6 +183,10 @@ static inline int x2apic_enabled(void) } #define x2apic_supported() (cpu_has_x2apic) +static inline void x2apic_force_phys(void) +{ + x2apic_phys = 1; +} #else static inline void check_x2apic(void) { @@ -194,6 +198,9 @@ static inline int x2apic_enabled(void) { return 0; } +static inline void x2apic_force_phys(void) +{ +} #define x2apic_preenabled 0 #define x2apic_supported() 0 diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 0b021c56e822..de039fcdd053 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -49,6 +49,7 @@ #include #include #include +#include unsigned int num_processors; @@ -1361,52 +1362,76 @@ void enable_x2apic(void) } #endif /* CONFIG_X86_X2APIC */ -void __init enable_IR_x2apic(void) +int __init enable_IR(void) { #ifdef CONFIG_INTR_REMAP int ret; - unsigned long flags; - struct IO_APIC_route_entry **ioapic_entries = NULL; ret = dmar_table_init(); if (ret) { pr_debug("dmar_table_init() failed with %d:\n", ret); - goto ir_failed; + return 0; } if (!intr_remapping_supported()) { pr_debug("intr-remapping not supported\n"); - goto ir_failed; + return 0; } - if (!x2apic_preenabled && skip_ioapic_setup) { pr_info("Skipped enabling intr-remap because of skipping " "io-apic setup\n"); - return; + return 0; } + if (enable_intr_remapping(x2apic_supported())) + return 0; + + pr_info("Enabled Interrupt-remapping\n"); + + return 1; + +#endif + return 0; +} + +void __init enable_IR_x2apic(void) +{ + unsigned long flags; + struct IO_APIC_route_entry **ioapic_entries = NULL; + int ret, x2apic_enabled = 0; + ioapic_entries = alloc_ioapic_entries(); if (!ioapic_entries) { - pr_info("Allocate ioapic_entries failed: %d\n", ret); - goto end; + pr_err("Allocate ioapic_entries failed\n"); + goto out; } ret = save_IO_APIC_setup(ioapic_entries); if (ret) { pr_info("Saving IO-APIC state failed: %d\n", ret); - goto end; + goto out; } local_irq_save(flags); - mask_IO_APIC_setup(ioapic_entries); mask_8259A(); + mask_IO_APIC_setup(ioapic_entries); - ret = enable_intr_remapping(x2apic_supported()); - if (ret) - goto end_restore; + ret = enable_IR(); + if (!ret) { + /* IR is required if there is APIC ID > 255 even when running + * under KVM + */ + if (max_physical_apicid > 255 || !kvm_para_available()) + goto nox2apic; + /* + * without IR all CPUs can be addressed by IOAPIC/MSI + * only in physical mode + */ + x2apic_force_phys(); + } - pr_info("Enabled Interrupt-remapping\n"); + x2apic_enabled = 1; if (x2apic_supported() && !x2apic_mode) { x2apic_mode = 1; @@ -1414,41 +1439,25 @@ void __init enable_IR_x2apic(void) pr_info("Enabled x2apic\n"); } -end_restore: - if (ret) - /* - * IR enabling failed - */ +nox2apic: + if (!ret) /* IR enabling failed */ restore_IO_APIC_setup(ioapic_entries); - unmask_8259A(); local_irq_restore(flags); -end: +out: if (ioapic_entries) free_ioapic_entries(ioapic_entries); - if (!ret) + if (x2apic_enabled) return; -ir_failed: if (x2apic_preenabled) - panic("x2apic enabled by bios. But IR enabling failed"); + panic("x2apic: enabled by BIOS but kernel init failed."); else if (cpu_has_x2apic) - pr_info("Not enabling x2apic,Intr-remapping\n"); -#else - if (!cpu_has_x2apic) - return; - - if (x2apic_preenabled) - panic("x2apic enabled prior OS handover," - " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP"); -#endif - - return; + pr_info("Not enabling x2apic, Intr-remapping init failed.\n"); } - #ifdef CONFIG_X86_64 /* * Detect and enable local APICs on non-SMP boards. diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index bc3e880f9b82..f3b1037076e4 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -50,11 +50,11 @@ static struct apic *apic_probe[] __initdata = { void __init default_setup_apic_routing(void) { #ifdef CONFIG_X86_X2APIC - if (x2apic_mode && (apic != &apic_x2apic_phys && + if (x2apic_mode #ifdef CONFIG_X86_UV - apic != &apic_x2apic_uv_x && + && apic != &apic_x2apic_uv_x #endif - apic != &apic_x2apic_cluster)) { + ) { if (x2apic_phys) apic = &apic_x2apic_phys; else -- cgit v1.2.3 From f3d1915a8623b9248572d3ee44e19a80b7a3520b Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Thu, 6 Aug 2009 00:09:31 +0400 Subject: x86, ioapic: Panic on irq-pin binding only if needed Though the most time we are to panic on irq-pin allocation fails, for PCI interrupts it's not the case and we could continue operate even if irq-pin allocation failed. Signed-off-by: Cyrill Gorcunov Cc: Yinghai Lu LKML-Reference: <20090805200931.GB5319@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 2a145d3a8375..2999f3dd5889 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -490,7 +490,8 @@ static void ioapic_mask_entry(int apic, int pin) * shared ISA-space IRQs, so we have to support them. We are super * fast in the common case, and fast for shared ISA-space IRQs. */ -static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) +static int +add_pin_to_irq_node_nopanic(struct irq_cfg *cfg, int node, int apic, int pin) { struct irq_pin_list **last, *entry; @@ -498,19 +499,27 @@ static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin last = &cfg->irq_2_pin; for_each_irq_pin(entry, cfg->irq_2_pin) { if (entry->apic == apic && entry->pin == pin) - return; + return 0; last = &entry->next; } entry = get_one_free_irq_2_pin(node); if (!entry) { - printk(KERN_ERR "can not alloc irq_pin_list\n"); - BUG_ON(1); + printk(KERN_ERR "can not alloc irq_pin_list (%d,%d,%d)\n", + node, apic, pin); + return -ENOMEM; } entry->apic = apic; entry->pin = pin; *last = entry; + return 0; +} + +static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) +{ + if (add_pin_to_irq_node_nopanic(cfg, node, apic, pin)) + panic("IO-APIC: failed to add irq-pin. Can not proceed\n"); } /* @@ -3843,7 +3852,11 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq, */ if (irq >= NR_IRQS_LEGACY) { cfg = desc->chip_data; - add_pin_to_irq_node(cfg, node, ioapic, pin); + if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) { + printk(KERN_INFO "can not add pin %d for irq %d\n", + pin, irq); + return 0; + } } setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity); -- cgit v1.2.3 From b7f42ab2e237f08a5bbcefa17473e80eb05e725c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 17 Aug 2009 11:19:40 -0700 Subject: x86, apic: Move dmar_table_init() out of enable_IR() On an x2apic system, we got: [ 1.818072] ------------[ cut here ]------------ [ 1.820376] WARNING: at kernel/lockdep.c:2461 lockdep_trace_alloc+0xa5/0xe9() [ 1.835282] Hardware name: ASSY, [ 1.839006] Modules linked in: [ 1.841253] Pid: 1, comm: swapper Not tainted 2.6.31-rc5-tip-03926-g39aaa80-dirty #510 [ 1.858056] Call Trace: [ 1.859913] [] ? lockdep_trace_alloc+0xa5/0xe9 [ 1.876270] [] warn_slowpath_common+0x8d/0xd0 [ 1.879132] [] warn_slowpath_null+0x27/0x3d [ 1.896823] [] lockdep_trace_alloc+0xa5/0xe9 [ 1.900659] [] ? lock_release_holdtime+0x2f/0x199 [ 1.917188] [] kmem_cache_alloc_notrace+0x42/0x111 [ 1.922320] [] ? reserve_memtype+0x152/0x518 [ 1.938137] [] ? pat_pagerange_is_ram+0x4a/0x91 [ 1.941730] [] reserve_memtype+0x152/0x518 [ 1.958115] [] __ioremap_caller+0x1dd/0x30f [ 1.975507] [] ? acpi_os_map_memory+0x2a/0x47 [ 1.978987] [] ioremap_nocache+0x2a/0x40 [ 2.031400] [] ? trace_hardirqs_off+0x20/0x36 [ 2.036096] [] acpi_os_map_memory+0x2a/0x47 [ 2.046263] [] acpi_tb_verify_table+0x3d/0x85 [ 2.050349] [] ? _spin_unlock_irqrestore+0x50/0x76 [ 2.067327] [] acpi_get_table_with_size+0x64/0xd9 [ 2.070860] [] ? _spin_unlock_irqrestore+0x50/0x76 [ 2.088000] [] dmar_table_detect+0x33/0x70 [ 2.092047] [] dmar_table_init+0x43/0x428 [ 2.106854] [] enable_IR+0x1c/0x8d [ 2.110256] [] enable_IR_x2apic+0x7c/0x19e [ 2.127139] [] native_smp_prepare_cpus+0x139/0x3b8 [ 2.145175] [] kernel_init+0x71/0x1da [ 2.148913] [] child_rip+0xa/0x20 [ 2.152349] [] ? restore_args+0x0/0x30 [ 2.167931] [] ? kernel_init+0x0/0x1da [ 2.171671] [] ? child_rip+0x0/0x20 [ 2.187607] ---[ end trace a7919e7f17c0a725 ]--- Venkatesh Pallipadi said: | Looks like the problem started with this commit | | commit ce69a784504222c3ab6f1b3c357d09ec5772127a | Author: Gleb Natapov | Date: Mon Jul 20 15:24:17 2009 +0300 | | x86/apic: Enable x2APIC without interrupt remapping under KVM | | Before this commit, dmar_table_init() was getting called | with interrupts enabled and after this commit, it is getting | called with interrupts disabled. so try to move out dmar_table_init out of that function. Analyzed-by: Venkatesh Pallipadi Signed-off-by: Yinghai Lu Cc: Peter Zijlstra Cc: Gleb Natapov Cc: Suresh Siddha Cc: "Pallipadi, Venkatesh" LKML-Reference: <4A899F3C.2050104@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index de039fcdd053..3fc3a6c428da 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1365,14 +1365,6 @@ void enable_x2apic(void) int __init enable_IR(void) { #ifdef CONFIG_INTR_REMAP - int ret; - - ret = dmar_table_init(); - if (ret) { - pr_debug("dmar_table_init() failed with %d:\n", ret); - return 0; - } - if (!intr_remapping_supported()) { pr_debug("intr-remapping not supported\n"); return 0; @@ -1400,6 +1392,14 @@ void __init enable_IR_x2apic(void) unsigned long flags; struct IO_APIC_route_entry **ioapic_entries = NULL; int ret, x2apic_enabled = 0; + int dmar_table_init_ret = 0; + +#ifdef CONFIG_INTR_REMAP + dmar_table_init_ret = dmar_table_init(); + if (dmar_table_init_ret) + pr_debug("dmar_table_init() failed with %d:\n", + dmar_table_init_ret); +#endif ioapic_entries = alloc_ioapic_entries(); if (!ioapic_entries) { @@ -1417,7 +1417,11 @@ void __init enable_IR_x2apic(void) mask_8259A(); mask_IO_APIC_setup(ioapic_entries); - ret = enable_IR(); + if (dmar_table_init_ret) + ret = 0; + else + ret = enable_IR(); + if (!ret) { /* IR is required if there is APIC ID > 255 even when running * under KVM -- cgit v1.2.3 From 005155b1f626d2b2d7932e4afdf4fead168c6888 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 25 Aug 2009 15:35:12 +0200 Subject: x86: Fix x86_model test in es7000_apic_is_cluster() For the x86_model to be greater than 6 or less than 12 is logically always true. Signed-off-by: Roel Kluin Cc: Andrew Morton Cc: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/es7000_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 69328ac8de9c..420f95da7bf6 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -167,7 +167,7 @@ static int es7000_apic_is_cluster(void) { /* MPENTIUMIII */ if (boot_cpu_data.x86 == 6 && - (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11)) + (boot_cpu_data.x86_model >= 7 && boot_cpu_data.x86_model <= 11)) return 1; return 0; -- cgit v1.2.3 From 8f3e1df48baf728bbb0f242c9dff9c9d7108218a Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 24 Aug 2009 21:53:36 +0400 Subject: x86, ioapic: Define IO_APIC_DEFAULT_PHYS_BASE constant We already have APIC_DEFAULT_PHYS_BASE so just to be consistent. Signed-off-by: Cyrill Gorcunov LKML-Reference: <20090824175550.927946757@openvz.org> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apicdef.h | 3 ++- arch/x86/kernel/mpparse.c | 10 +++++----- 2 files changed, 7 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h index 7ddb36ab933b..7386bfa4f4bc 100644 --- a/arch/x86/include/asm/apicdef.h +++ b/arch/x86/include/asm/apicdef.h @@ -8,7 +8,8 @@ * Ingo Molnar , 1999, 2000 */ -#define APIC_DEFAULT_PHYS_BASE 0xfee00000 +#define IO_APIC_DEFAULT_PHYS_BASE 0xfec00000 +#define APIC_DEFAULT_PHYS_BASE 0xfee00000 #define APIC_ID 0x20 diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 651c93b28862..fcd513bf2846 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -482,11 +482,11 @@ static void __init construct_ioapic_table(int mpc_default_type) MP_bus_info(&bus); } - ioapic.type = MP_IOAPIC; - ioapic.apicid = 2; - ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01; - ioapic.flags = MPC_APIC_USABLE; - ioapic.apicaddr = 0xFEC00000; + ioapic.type = MP_IOAPIC; + ioapic.apicid = 2; + ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01; + ioapic.flags = MPC_APIC_USABLE; + ioapic.apicaddr = IO_APIC_DEFAULT_PHYS_BASE; MP_ioapic_info(&ioapic); /* -- cgit v1.2.3 From ffc438366c2660a6a811b94ba33229bf217f8254 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 24 Aug 2009 21:53:39 +0400 Subject: x86, ioapic: Get rid of needless check and simplify ioapic_setup_resources() alloc_bootmem() already panics on allocation failure. There is no need to check the result. Also there is a way to unbind global variable from its body and use it as a parameter which allow us to simplify ioapic_init_mappings as well -- "for" cycle already uses nr_ioapics as a conditional variable and there is no need to check if ioapic_setup_resources was returning NULL again. Signed-off-by: Cyrill Gorcunov Cc: Yinghai Lu LKML-Reference: <20090824175551.493629148@openvz.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 2999f3dd5889..d836b4d347e6 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -4053,7 +4053,7 @@ void __init setup_ioapic_dest(void) static struct resource *ioapic_resources; -static struct resource * __init ioapic_setup_resources(void) +static struct resource * __init ioapic_setup_resources(int nr_ioapics) { unsigned long n; struct resource *res; @@ -4069,15 +4069,13 @@ static struct resource * __init ioapic_setup_resources(void) mem = alloc_bootmem(n); res = (void *)mem; - if (mem != NULL) { - mem += sizeof(struct resource) * nr_ioapics; + mem += sizeof(struct resource) * nr_ioapics; - for (i = 0; i < nr_ioapics; i++) { - res[i].name = mem; - res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; - sprintf(mem, "IOAPIC %u", i); - mem += IOAPIC_RESOURCE_NAME_SIZE; - } + for (i = 0; i < nr_ioapics; i++) { + res[i].name = mem; + res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; + sprintf(mem, "IOAPIC %u", i); + mem += IOAPIC_RESOURCE_NAME_SIZE; } ioapic_resources = res; @@ -4091,7 +4089,7 @@ void __init ioapic_init_mappings(void) struct resource *ioapic_res; int i; - ioapic_res = ioapic_setup_resources(); + ioapic_res = ioapic_setup_resources(nr_ioapics); for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { ioapic_phys = mp_ioapics[i].apicaddr; @@ -4120,11 +4118,9 @@ fake_ioapic_page: __fix_to_virt(idx), ioapic_phys); idx++; - if (ioapic_res != NULL) { - ioapic_res->start = ioapic_phys; - ioapic_res->end = ioapic_phys + (4 * 1024) - 1; - ioapic_res++; - } + ioapic_res->start = ioapic_phys; + ioapic_res->end = ioapic_phys + (4 * 1024) - 1; + ioapic_res++; } } -- cgit v1.2.3 From d3a247bfb2c26f5b67367d58af7ad8c2efbbc6c1 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Wed, 26 Aug 2009 21:13:24 +0400 Subject: x86, apic: Slim down stack usage in early_init_lapic_mapping() As far as I see there is no external poking of mp_lapic_addr in this procedure which could lead to unpredited changes and require local storage unit for it. Lets use it plain forward. Signed-off-by: Cyrill Gorcunov Cc: Yinghai Lu LKML-Reference: <20090826171324.GC4548@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 3fc3a6c428da..159740decc41 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1562,8 +1562,6 @@ no_apic: #ifdef CONFIG_X86_64 void __init early_init_lapic_mapping(void) { - unsigned long phys_addr; - /* * If no local APIC can be found then go out * : it means there is no mpatable and MADT @@ -1571,11 +1569,9 @@ void __init early_init_lapic_mapping(void) if (!smp_found_config) return; - phys_addr = mp_lapic_addr; - - set_fixmap_nocache(FIX_APIC_BASE, phys_addr); + set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", - APIC_BASE, phys_addr); + APIC_BASE, mp_lapic_addr); /* * Fetch the APIC ID of the BSP in case we have a -- cgit v1.2.3 From 2a4ab640d3c28c2952967e5f63ea495555bf2a5f Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 7 Jul 2009 23:01:15 -0400 Subject: ACPI, x86: expose some IO-APIC routines when CONFIG_ACPI=n Some IO-APIC routines are ACPI specific now, but need to be exposed when CONFIG_ACPI=n for the benefit of SFI. Remove #ifdef ACPI around these routines: io_apic_get_unique_id(int ioapic, int apic_id); io_apic_get_version(int ioapic); io_apic_get_redir_entries(int ioapic); Move these routines from ACPI-specific boot.c to io_apic.c: uniq_ioapic_id(u8 id) mp_find_ioapic() mp_find_ioapic_pin() mp_register_ioapic() Also, since uniq_ioapic_id() is now no longer static, re-name it to io_apic_unique_id() for consistency with the other public io_apic routines. For simplicity, do not #ifdef the resulting code ACPI || SFI, thought that could be done in the future if it is important to optimize the !ACPI !SFI IO-APIC x86 kernel for size. Signed-off-by: Feng Tang Signed-off-by: Len Brown Cc: x86@kernel.org --- arch/x86/include/asm/io_apic.h | 13 +++++- arch/x86/kernel/acpi/boot.c | 102 +--------------------------------------- arch/x86/kernel/apic/io_apic.c | 103 ++++++++++++++++++++++++++++++++++++++--- 3 files changed, 109 insertions(+), 109 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 330ee807f89e..85232d32fcb8 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -150,11 +150,10 @@ extern int timer_through_8259; #define io_apic_assign_pci_irqs \ (mp_irq_entries && !skip_ioapic_setup && io_apic_irqs) -#ifdef CONFIG_ACPI +extern u8 io_apic_unique_id(u8 id); extern int io_apic_get_unique_id(int ioapic, int apic_id); extern int io_apic_get_version(int ioapic); extern int io_apic_get_redir_entries(int ioapic); -#endif /* CONFIG_ACPI */ struct io_apic_irq_attr; extern int io_apic_set_pci_routing(struct device *dev, int irq, @@ -177,6 +176,16 @@ extern int setup_ioapic_entry(int apic, int irq, int polarity, int vector, int pin); extern void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e); + +struct mp_ioapic_gsi{ + int gsi_base; + int gsi_end; +}; +extern struct mp_ioapic_gsi mp_gsi_routing[]; +int mp_find_ioapic(int gsi); +int mp_find_ioapic_pin(int ioapic, int gsi); +void __init mp_register_ioapic(int id, u32 address, u32 gsi_base); + #else /* !CONFIG_X86_IO_APIC */ #define io_apic_assign_pci_irqs 0 static const int timer_through_8259 = 0; diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6b8ca3a0285d..7e62d1eb8e30 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -833,106 +833,6 @@ static int __init acpi_parse_madt_lapic_entries(void) extern int es7000_plat; #endif -static struct { - int gsi_base; - int gsi_end; -} mp_ioapic_routing[MAX_IO_APICS]; - -int mp_find_ioapic(int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_base) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; -} - -int mp_find_ioapic_pin(int ioapic, int gsi) -{ - if (WARN_ON(ioapic == -1)) - return -1; - if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end)) - return -1; - - return gsi - mp_ioapic_routing[ioapic].gsi_base; -} - -static u8 __init uniq_ioapic_id(u8 id) -{ -#ifdef CONFIG_X86_32 - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return io_apic_get_unique_id(nr_ioapics, id); - else - return id; -#else - int i; - DECLARE_BITMAP(used, 256); - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); -#endif -} - -static int bad_ioapic(unsigned long address) -{ - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " - "(found %d)\n", MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!\n"); - } - if (!address) { - printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" - " found in table, skipping!\n"); - return 1; - } - return 0; -} - -void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) -{ - int idx = 0; - - if (bad_ioapic(address)) - return; - - idx = nr_ioapics; - - mp_ioapics[idx].type = MP_IOAPIC; - mp_ioapics[idx].flags = MPC_APIC_USABLE; - mp_ioapics[idx].apicaddr = address; - - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].apicid = uniq_ioapic_id(id); - mp_ioapics[idx].apicver = io_apic_get_version(idx); - - /* - * Build basic GSI lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI GSIs). - */ - mp_ioapic_routing[idx].gsi_base = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].apicid, - mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr, - mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); - - nr_ioapics++; -} - int __init acpi_probe_gsi(void) { int idx; @@ -947,7 +847,7 @@ int __init acpi_probe_gsi(void) max_gsi = 0; for (idx = 0; idx < nr_ioapics; idx++) { - gsi = mp_ioapic_routing[idx].gsi_end; + gsi = mp_gsi_routing[idx].gsi_end; if (gsi > max_gsi) max_gsi = gsi; diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index d2ed6c5ddc80..a8c0232b3893 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -85,6 +85,9 @@ int nr_ioapic_registers[MAX_IO_APICS]; struct mpc_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; +/* IO APIC gsi routing info */ +struct mp_ioapic_gsi mp_gsi_routing[MAX_IO_APICS]; + /* MP IRQ source entries */ struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; @@ -3941,11 +3944,28 @@ int io_apic_set_pci_routing(struct device *dev, int irq, return __io_apic_set_pci_routing(dev, irq, irq_attr); } -/* -------------------------------------------------------------------------- - ACPI-based IOAPIC Configuration - -------------------------------------------------------------------------- */ +u8 __init io_apic_unique_id(u8 id) +{ +#ifdef CONFIG_X86_32 + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return io_apic_get_unique_id(nr_ioapics, id); + else + return id; +#else + int i; + DECLARE_BITMAP(used, 256); -#ifdef CONFIG_ACPI + bitmap_zero(used, 256); + for (i = 0; i < nr_ioapics; i++) { + struct mpc_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->apicid, used); + } + if (!test_bit(id, used)) + return id; + return find_first_zero_bit(used, 256); +#endif +} #ifdef CONFIG_X86_32 int __init io_apic_get_unique_id(int ioapic, int apic_id) @@ -4054,8 +4074,6 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) return 0; } -#endif /* CONFIG_ACPI */ - /* * This function currently is only a helper for the i386 smp boot process where * we need to reprogram the ioredtbls to cater for the cpus which have come online @@ -4201,3 +4219,76 @@ void __init ioapic_insert_resources(void) r++; } } + +int mp_find_ioapic(int gsi) +{ + int i = 0; + + /* Find the IOAPIC that manages this GSI. */ + for (i = 0; i < nr_ioapics; i++) { + if ((gsi >= mp_gsi_routing[i].gsi_base) + && (gsi <= mp_gsi_routing[i].gsi_end)) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +int mp_find_ioapic_pin(int ioapic, int gsi) +{ + if (WARN_ON(ioapic == -1)) + return -1; + if (WARN_ON(gsi > mp_gsi_routing[ioapic].gsi_end)) + return -1; + + return gsi - mp_gsi_routing[ioapic].gsi_base; +} + +static int bad_ioapic(unsigned long address) +{ + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded " + "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics); + return 1; + } + if (!address) { + printk(KERN_WARNING "WARNING: Bogus (zero) I/O APIC address" + " found in table, skipping!\n"); + return 1; + } + return 0; +} + +void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) +{ + int idx = 0; + + if (bad_ioapic(address)) + return; + + idx = nr_ioapics; + + mp_ioapics[idx].type = MP_IOAPIC; + mp_ioapics[idx].flags = MPC_APIC_USABLE; + mp_ioapics[idx].apicaddr = address; + + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); + mp_ioapics[idx].apicid = io_apic_unique_id(id); + mp_ioapics[idx].apicver = io_apic_get_version(idx); + + /* + * Build basic GSI lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI GSIs). + */ + mp_gsi_routing[idx].gsi_base = gsi_base; + mp_gsi_routing[idx].gsi_end = gsi_base + + io_apic_get_redir_entries(idx); + + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " + "GSI %d-%d\n", idx, mp_ioapics[idx].apicid, + mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr, + mp_gsi_routing[idx].gsi_base, mp_gsi_routing[idx].gsi_end); + + nr_ioapics++; +} -- cgit v1.2.3