From f22d2545517a0ffb8da2879d3a0dbcae99848e6c Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 9 Oct 2014 17:03:14 +0300 Subject: ARM: OMAP2+: hwmod: add parent_hwmod support Add parent_hwmod pointer to omap_hwmod. This can be set to point to a "parent" hwmod that needs to be enabled for the "child" hwmod to work. This is used at hwmod setup time: when doing the initial setup and reset, first enable the parent hwmod, and after setup and reset is done, restore the parent hwmod to postsetup_state. Signed-off-by: Tomi Valkeinen Reviewed-by: Archit Taneja [paul@pwsan.com: add kerneldoc documentation for parent_hwmod; note that it is a temporary workaround] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 22 ++++++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod.h | 8 ++++++++ 2 files changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index acae6d5d1151..a2c7b300fe89 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2719,11 +2719,33 @@ static int __init _setup(struct omap_hwmod *oh, void *data) if (oh->_state != _HWMOD_STATE_INITIALIZED) return 0; + if (oh->parent_hwmod) { + int r; + + r = _enable(oh->parent_hwmod); + WARN(r, "hwmod: %s: setup: failed to enable parent hwmod %s\n", + oh->name, oh->parent_hwmod->name); + } + _setup_iclk_autoidle(oh); if (!_setup_reset(oh)) _setup_postsetup(oh); + if (oh->parent_hwmod) { + u8 postsetup_state; + + postsetup_state = oh->parent_hwmod->_postsetup_state; + + if (postsetup_state == _HWMOD_STATE_IDLE) + _idle(oh->parent_hwmod); + else if (postsetup_state == _HWMOD_STATE_DISABLED) + _shutdown(oh->parent_hwmod); + else if (postsetup_state != _HWMOD_STATE_ENABLED) + WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n", + oh->parent_hwmod->name, postsetup_state); + } + return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 512f809a3f4d..35ca6efbec31 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -633,6 +633,7 @@ struct omap_hwmod_link { * @flags: hwmod flags (documented below) * @_lock: spinlock serializing operations on this hwmod * @node: list node for hwmod list (internal use) + * @parent_hwmod: (temporary) a pointer to the hierarchical parent of this hwmod * * @main_clk refers to this module's "main clock," which for our * purposes is defined as "the functional clock needed for register @@ -643,6 +644,12 @@ struct omap_hwmod_link { * the omap_hwmod code and should not be set during initialization. * * @masters and @slaves are now deprecated. + * + * @parent_hwmod is temporary; there should be no need for it, as this + * information should already be expressed in the OCP interface + * structures. @parent_hwmod is present as a workaround until we improve + * handling for hwmods with multiple parents (e.g., OMAP4+ DSS with + * multiple register targets across different interconnects). */ struct omap_hwmod { const char *name; @@ -680,6 +687,7 @@ struct omap_hwmod { u8 _int_flags; u8 _state; u8 _postsetup_state; + struct omap_hwmod *parent_hwmod; }; struct omap_hwmod *omap_hwmod_lookup(const char *name); -- cgit v1.2.3 From 9ed69650897e8738c959fe8242ec41499f3f3f35 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 9 Oct 2014 17:03:15 +0300 Subject: ARM: OMAP5: hwmod: set DSS submodule parent hwmods Set DSS core hwmod as the parent for all the DSS submodules. Signed-off-by: Tomi Valkeinen Reviewed-by: Archit Taneja Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 1103aa0e0d29..229c7fb7e1c3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -421,6 +421,7 @@ static struct omap_hwmod omap54xx_dss_dispc_hwmod = { .opt_clks = dss_dispc_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), .dev_attr = &dss_dispc_dev_attr, + .parent_hwmod = &omap54xx_dss_hwmod, }; /* @@ -462,6 +463,7 @@ static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = { }, .opt_clks = dss_dsi1_a_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_a_opt_clks), + .parent_hwmod = &omap54xx_dss_hwmod, }; /* dss_dsi1_c */ @@ -482,6 +484,7 @@ static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = { }, .opt_clks = dss_dsi1_c_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_c_opt_clks), + .parent_hwmod = &omap54xx_dss_hwmod, }; /* @@ -521,6 +524,7 @@ static struct omap_hwmod omap54xx_dss_hdmi_hwmod = { }, .opt_clks = dss_hdmi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), + .parent_hwmod = &omap54xx_dss_hwmod, }; /* @@ -560,6 +564,7 @@ static struct omap_hwmod omap54xx_dss_rfbi_hwmod = { }, .opt_clks = dss_rfbi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), + .parent_hwmod = &omap54xx_dss_hwmod, }; /* -- cgit v1.2.3 From 543b2847d4bdb07eb1b50003095bc65cf2a1e2c0 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 9 Oct 2014 17:03:16 +0300 Subject: ARM: OMAP4: hwmod: set DSS submodule parent hwmods Set DSS core hwmod as the parent for all the DSS submodules. Signed-off-by: Tomi Valkeinen Reviewed-by: Archit Taneja Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 44e5634bba34..df8dc0f6530f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -647,7 +647,8 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, - .dev_attr = &omap44xx_dss_dispc_dev_attr + .dev_attr = &omap44xx_dss_dispc_dev_attr, + .parent_hwmod = &omap44xx_dss_hwmod, }; /* @@ -701,6 +702,7 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = { }, .opt_clks = dss_dsi1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks), + .parent_hwmod = &omap44xx_dss_hwmod, }; /* dss_dsi2 */ @@ -733,6 +735,7 @@ static struct omap_hwmod omap44xx_dss_dsi2_hwmod = { }, .opt_clks = dss_dsi2_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks), + .parent_hwmod = &omap44xx_dss_hwmod, }; /* @@ -790,6 +793,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { }, .opt_clks = dss_hdmi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), + .parent_hwmod = &omap44xx_dss_hwmod, }; /* @@ -836,6 +840,7 @@ static struct omap_hwmod omap44xx_dss_rfbi_hwmod = { }, .opt_clks = dss_rfbi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), + .parent_hwmod = &omap44xx_dss_hwmod, }; /* @@ -859,6 +864,7 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = { .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, + .parent_hwmod = &omap44xx_dss_hwmod, }; /* -- cgit v1.2.3 From 7ede8561614afcc82f0e17bb70ae64fd620b94b0 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 9 Oct 2014 17:03:17 +0300 Subject: ARM: OMAP4: hwmod: use MODULEMODE properly Instead of using a hacky "dss_fck" clock (which toggles the MODULEMODE bit) as DSS L3 interface clock, set the .modulemode field in the omap44xx_dss_hwmod. This works now that the DSS core hwmod is enabled during DSS submodule resets. Signed-off-by: Tomi Valkeinen Reviewed-by: Archit Taneja Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index df8dc0f6530f..8126f178d57e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -589,6 +589,7 @@ static struct omap_hwmod omap44xx_dss_hwmod = { .omap4 = { .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .opt_clks = dss_opt_clks, @@ -3677,7 +3678,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_dma_addrs, .user = OCP_USER_SDMA, }; @@ -3713,7 +3714,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_dispc_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_dispc_dma_addrs, .user = OCP_USER_SDMA, }; @@ -3749,7 +3750,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_dsi1_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_dsi1_dma_addrs, .user = OCP_USER_SDMA, }; @@ -3785,7 +3786,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_dsi2_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_dsi2_dma_addrs, .user = OCP_USER_SDMA, }; @@ -3821,7 +3822,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_hdmi_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_hdmi_dma_addrs, .user = OCP_USER_SDMA, }; @@ -3857,7 +3858,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_rfbi_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_rfbi_dma_addrs, .user = OCP_USER_SDMA, }; @@ -3893,7 +3894,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_venc_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_venc_dma_addrs, .user = OCP_USER_SDMA, }; -- cgit v1.2.3 From 2cc84f46de7118d4a5a5b7ed1dced40c2247083d Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 9 Oct 2014 17:03:18 +0300 Subject: ARM: OMAP4: fix RFBI iclk RFBI iclk was set to point to hacky "dss_fck", which will be removed. Instead use "l3_div_ck", which is the proper clock for this. "l3_div_ck" is the parent of "dss_fck", so the clock rate is the same as previously. Signed-off-by: Tomi Valkeinen Reviewed-by: Archit Taneja Signed-off-by: Paul Walmsley --- arch/arm/boot/dts/omap4.dtsi | 2 +- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 878c979203d0..84045a5c3ce8 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -895,7 +895,7 @@ reg = <0x58002000 0x1000>; status = "disabled"; ti,hwmods = "dss_rfbi"; - clocks = <&dss_dss_clk>, <&dss_fck>; + clocks = <&dss_dss_clk>, <&l3_div_ck>; clock-names = "fck", "ick"; }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 8126f178d57e..d6f41e1b6d1b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -824,7 +824,7 @@ static struct omap_hwmod_dma_info omap44xx_dss_rfbi_sdma_reqs[] = { }; static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { - { .role = "ick", .clk = "dss_fck" }, + { .role = "ick", .clk = "l3_div_ck" }, }; static struct omap_hwmod omap44xx_dss_rfbi_hwmod = { -- cgit v1.2.3 From e01600e3125be3caf5635d90bb182864f3b2d9b3 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 9 Oct 2014 17:03:19 +0300 Subject: ARM: dts: omap4.dtsi: remove dss_fck "dss_fck" is a hacky clock, used to work around problems with MODULEMODE bit handling in DSS hwmods. These problems have now been solved, so we can remove the dss_fck clock. Signed-off-by: Tomi Valkeinen Reviewed-by: Archit Taneja Signed-off-by: Paul Walmsley --- arch/arm/boot/dts/omap44xx-clocks.dtsi | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index c821ff5e9b8d..f2c48f09824e 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -1018,14 +1018,6 @@ reg = <0x1120>; }; - dss_fck: dss_fck { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3_div_ck>; - ti,bit-shift = <1>; - reg = <0x1120>; - }; - fdif_fck: fdif_fck { #clock-cells = <0>; compatible = "ti,divider-clock"; -- cgit v1.2.3 From 33acc9fff9e0c48d3e1416a077cf9532b998ced0 Mon Sep 17 00:00:00 2001 From: Ambresh K Date: Tue, 21 Oct 2014 11:17:51 -0500 Subject: ARM: DRA7: hwmod data: Add missing UART hwmod data We had constrainted hwmod entries to entries in dts which were present only for default mapped interrupts, the ones such as UARTs > 6 which needed IRQ crossbar configured were never added to hwmod database. Add them now that IRQ crossbar is functional Without this, enabling UARTs7 to 10 in dts results in the following crash: [ 1.893829] omap_uart 48420000.serial: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info [ 1.903381] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 1.903381] ------------[ cut here ]------------ [ 1.903381] WARNING: CPU: 0 PID: 0 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x2ac/0x32c() [ 1.903411] 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER2_P3 (Read): Data Access in User mode during Functional access [ 1.903411] Modules linked in: [ 1.903411] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.18.0-rc1-dirty #3 [ 1.903442] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 1.903442] [] (show_stack) from [] (dump_stack+0x78/0x94) [ 1.903472] [] (dump_stack) from [] (warn_slowpath_common+0x6c/0x8c) [ 1.903472] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [ 1.903472] [] (warn_slowpath_fmt) from [] (l3_interrupt_handler+0x2ac/0x32c) [ 1.903503] [] (l3_interrupt_handler) from [] (handle_irq_event_percpu+0x60/0x230) [ 1.903503] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x3c/0x5c) [ 1.903503] [] (handle_irq_event) from [] (handle_fasteoi_irq+0xc4/0x190) [ 1.903503] [] (handle_fasteoi_irq) from [] (generic_handle_irq+0x20/0x30) [ 1.903533] [] (generic_handle_irq) from [] (__handle_domain_irq+0x64/0xb8) [ 1.903533] [] (__handle_domain_irq) from [] (gic_handle_irq+0x20/0x60) [ 1.903533] [] (gic_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 1.903533] Exception stack(0xc08d1f60 to 0xc08d1fa8) [ 1.903564] 1f60: 00000001 00000001 00000000 c08dc930 c08d0000 00000000 00000000 00000000 [ 1.903564] 1f80: ffffffed c0978028 c08d89dc c08d8978 00000000 c08d1fa8 c0083fc0 c000f160 [ 1.903564] 1fa0: 20000013 ffffffff [ 1.903564] [] (__irq_svc) from [] (arch_cpu_idle+0x20/0x3c) [ 1.903594] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x198/0x338) [ 1.903594] [] (cpu_startup_entry) from [] (start_kernel+0x358/0x3c4) [ 1.903594] [] (start_kernel) from [<80008074>] (0x80008074) [ 1.903594] ---[ end trace 293fc95d463cff71 ]--- [ 2.117553] Internal error: : 1406 [#1] SMP ARM [ 2.122314] Modules linked in: [ 2.125518] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.18.0-rc1-dirty #3 [ 2.133850] task: ed868b80 ti: ed86a000 task.ti: ed86a000 [ 2.139526] PC is at serial_omap_probe+0x2fc/0x514 [ 2.144561] LR is at trace_hardirqs_on_caller+0xec/0x1c4 [ 2.150146] pc : [] lr : [] psr: 40000013 [ 2.150146] sp : ed86be18 ip : ed9bb57c fp : f005e000 [ 2.162231] r10: 0000012a r9 : ed9b4f80 r8 : edc5bdcd [ 2.167724] r7 : edc58810 r6 : ed9bb400 r5 : ed9bb410 r4 : edc5bc10 [ 2.174560] r3 : 00000000 r2 : 00000000 r1 : 00000014 r0 : ffffffed [ 2.181427] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 2.189117] Control: 10c5387d Table: 8000406a DAC: 00000015 [ 2.195159] Process swapper/0 (pid: 1, stack limit = 0xed86a248) [ 2.201477] Stack: (0xed86be18 to 0xed86c000) [ 2.206054] be00: ed9ba2d0 00000000 [ 2.214660] be20: edc50150 00000001 c08cba58 00000000 00000000 ed9bb410 ffffffed c09481d8 [ 2.223236] be40: 00000000 c09481d8 c08cba58 00000000 00000000 c039bcfc c1170958 ed9bb410 [ 2.231842] be60: ed9bb444 c039a6f4 00000000 ed9bb410 c09481d8 ed9bb444 00000000 c08dc698 [ 2.240447] be80: edc4a100 c039a8b0 c09481d8 c039a81c 00000000 c0399060 ed8afaa8 ed92c110 [ 2.249053] bea0: c09481d8 edc482c0 c0949308 c0399ee0 c077f80c c09481d8 ed86a000 c09481d8 [ 2.257659] bec0: ed86a000 c08dc698 00000000 c039b088 00000000 00000000 ed86a000 c08a1924 [ 2.266235] bee0: c08a1904 c00089c4 00000000 00000000 00000000 00000000 60000093 00000000 [ 2.274841] bf00: 00000004 00000000 ed868b80 00000004 00000000 60000053 00000000 00000001 [ 2.283447] bf20: 00000000 c0083ea8 00000001 ed86a000 c08334bc ef7fc307 000000b2 c0059358 [ 2.292053] bf40: c07e176c c083299c 00000006 00000006 c08cb588 c08b69cc 00000006 c08b69ac [ 2.300659] bf60: c097a280 000000b2 c08cba58 c0869588 00000000 c0869e04 00000006 00000006 [ 2.309234] bf80: c0869588 00000000 00000000 c05dfd7c 00000000 00000000 00000000 00000000 [ 2.317840] bfa0: 00000000 c05dfd84 00000000 c000e668 00000000 00000000 00000000 00000000 [ 2.326446] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.335052] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 020405d0 00090c40 [ 2.343658] [] (serial_omap_probe) from [] (platform_drv_probe+0x48/0x98) [ 2.352630] [] (platform_drv_probe) from [] (driver_probe_device+0x10c/0x234) [ 2.361968] [] (driver_probe_device) from [] (__driver_attach+0x94/0x98) [ 2.370819] [] (__driver_attach) from [] (bus_for_each_dev+0x54/0x88) [ 2.379425] [] (bus_for_each_dev) from [] (bus_add_driver+0xdc/0x1d4) [ 2.388031] [] (bus_add_driver) from [] (driver_register+0x78/0xf4) [ 2.396453] [] (driver_register) from [] (serial_omap_init+0x20/0x40) [ 2.405059] [] (serial_omap_init) from [] (do_one_initcall+0x80/0x1cc) [ 2.413757] [] (do_one_initcall) from [] (kernel_init_freeable+0x1b8/0x28c) [ 2.422912] [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe4) [ 2.431396] [] (kernel_init) from [] (ret_from_fork+0x14/0x2c) [ 2.439361] Code: e1b02f23 020320f0 0203300f 01a02222 (0a000021) [ 2.445770] ---[ end trace 293fc95d463cff72 ]--- [ 2.450683] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.450683] [ 2.460296] CPU0: stopping [ 2.463134] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D W 3.18.0-rc1-dirty #3 [ 2.471405] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.479522] [] (show_stack) from [] (dump_stack+0x78/0x94) [ 2.487060] [] (dump_stack) from [] (handle_IPI+0x190/0x264) [ 2.494781] [] (handle_IPI) from [] (gic_handle_irq+0x58/0x60) [ 2.502716] [] (gic_handle_irq) from [] (__irq_svc+0x44/0x5c) [ 2.510528] Exception stack(0xc08d1f60 to 0xc08d1fa8) [ 2.515808] 1f60: c000f15c 00000000 00000000 00000000 c08d0000 00000000 00000000 00000000 [ 2.524353] 1f80: ffffffed c0978028 c08d89dc c08d8978 00000000 c08d1fa8 c000f15c c000f160 [ 2.532897] 1fa0: 60000013 ffffffff [ 2.536529] [] (__irq_svc) from [] (arch_cpu_idle+0x20/0x3c) [ 2.544281] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x198/0x338) [ 2.552917] [] (cpu_startup_entry) from [] (start_kernel+0x358/0x3c4) [ 2.561462] [] (start_kernel) from [<80008074>] (0x80008074) [ 2.568298] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ Reported-by: Franklin Cooper Jr. Signed-off-by: Nishanth Menon Signed-off-by: Ambresh K Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 100 ++++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 5684f112654b..e2a70439bf35 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -2075,6 +2075,70 @@ static struct omap_hwmod dra7xx_uart6_hwmod = { }, }; +/* uart7 */ +static struct omap_hwmod dra7xx_uart7_hwmod = { + .name = "uart7", + .class = &dra7xx_uart_hwmod_class, + .clkdm_name = "l4per2_clkdm", + .main_clk = "uart7_gfclk_mux", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER2_UART7_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER2_UART7_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* uart8 */ +static struct omap_hwmod dra7xx_uart8_hwmod = { + .name = "uart8", + .class = &dra7xx_uart_hwmod_class, + .clkdm_name = "l4per2_clkdm", + .main_clk = "uart8_gfclk_mux", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER2_UART8_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER2_UART8_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* uart9 */ +static struct omap_hwmod dra7xx_uart9_hwmod = { + .name = "uart9", + .class = &dra7xx_uart_hwmod_class, + .clkdm_name = "l4per2_clkdm", + .main_clk = "uart9_gfclk_mux", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER2_UART9_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER2_UART9_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* uart10 */ +static struct omap_hwmod dra7xx_uart10_hwmod = { + .name = "uart10", + .class = &dra7xx_uart_hwmod_class, + .clkdm_name = "wkupaon_clkdm", + .main_clk = "uart10_gfclk_mux", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_WKUPAON_UART10_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_WKUPAON_UART10_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + /* * 'usb_otg_ss' class * @@ -3095,6 +3159,38 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart6 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_per2 -> uart7 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart7 = { + .master = &dra7xx_l4_per2_hwmod, + .slave = &dra7xx_uart7_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per2 -> uart8 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart8 = { + .master = &dra7xx_l4_per2_hwmod, + .slave = &dra7xx_uart8_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per2 -> uart9 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart9 = { + .master = &dra7xx_l4_per2_hwmod, + .slave = &dra7xx_uart9_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> uart10 */ +static struct omap_hwmod_ocp_if dra7xx_l4_wkup__uart10 = { + .master = &dra7xx_l4_wkup_hwmod, + .slave = &dra7xx_uart10_hwmod, + .clk = "wkupaon_iclk_mux", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_per3 -> usb_otg_ss1 */ static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = { .master = &dra7xx_l4_per3_hwmod, @@ -3259,6 +3355,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per1__uart4, &dra7xx_l4_per1__uart5, &dra7xx_l4_per1__uart6, + &dra7xx_l4_per2__uart7, + &dra7xx_l4_per2__uart8, + &dra7xx_l4_per2__uart9, + &dra7xx_l4_wkup__uart10, &dra7xx_l4_per3__usb_otg_ss1, &dra7xx_l4_per3__usb_otg_ss2, &dra7xx_l4_per3__usb_otg_ss3, -- cgit v1.2.3 From d1180f69b82337cc778c82819aac0dbb39bd1267 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Fri, 21 Nov 2014 15:44:21 +0530 Subject: ARM: OMAP2+: hwmod: AM43x: add hwmod support for ADC on AM43xx This patch adds hwmod support for ADC on AM43xx. Since clockdomain and offsets of adc_tsc are different from AM33xx, ADC data has been directly added to AM43xx hwmod file. Signed-off-by: Vignesh R [paul@pwsan.com: fixed spelling of "Anolog"; converted spaces to tabs] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 39 ++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index fea01aa3ef42..5c6c8410160e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -417,6 +417,37 @@ static struct omap_hwmod am43xx_qspi_hwmod = { }, }; +/* + * 'adc/tsc' class + * TouchScreen Controller (Analog-To-Digital Converter) + */ +static struct omap_hwmod_class_sysconfig am43xx_adc_tsc_sysc = { + .rev_offs = 0x00, + .sysc_offs = 0x10, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class am43xx_adc_tsc_hwmod_class = { + .name = "adc_tsc", + .sysc = &am43xx_adc_tsc_sysc, +}; + +static struct omap_hwmod am43xx_adc_tsc_hwmod = { + .name = "adc_tsc", + .class = &am43xx_adc_tsc_hwmod_class, + .clkdm_name = "l3s_tsc_clkdm", + .main_clk = "adc_tsc_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + /* dss */ static struct omap_hwmod am43xx_dss_core_hwmod = { @@ -547,6 +578,13 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__gpio0 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_ocp_if am43xx_l4_wkup__adc_tsc = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am43xx_adc_tsc_hwmod, + .clk = "dpll_core_m4_div2_ck", + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_ocp_if am43xx_l4_hs__cpgmac0 = { .master = &am43xx_l4_hs_hwmod, .slave = &am33xx_cpgmac0_hwmod, @@ -789,6 +827,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_wkup__i2c1, &am43xx_l4_wkup__gpio0, &am43xx_l4_wkup__wd_timer1, + &am43xx_l4_wkup__adc_tsc, &am43xx_l3_s__qspi, &am33xx_l4_per__dcan0, &am33xx_l4_per__dcan1, -- cgit v1.2.3 From 29c4ce17bcad34a086348dfd5c42b8cf5fda110b Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Tue, 18 Nov 2014 11:13:24 +0200 Subject: ARM: dts: cm-t3x30: add keypad support Add twl4030 matrtix keypad support. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi index 25ba08331d88..3cbaf98c1372 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi @@ -64,6 +64,7 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +#include &mmc1 { vmmc-supply = <&vmmc1>; @@ -75,6 +76,22 @@ ti,pullups = <0x000001>; }; +&twl_keypad { + linux,keymap = < + MATRIX_KEY(0x00, 0x01, KEY_A) + MATRIX_KEY(0x00, 0x02, KEY_B) + MATRIX_KEY(0x00, 0x03, KEY_LEFT) + + MATRIX_KEY(0x01, 0x01, KEY_UP) + MATRIX_KEY(0x01, 0x02, KEY_ENTER) + MATRIX_KEY(0x01, 0x03, KEY_DOWN) + + MATRIX_KEY(0x02, 0x01, KEY_RIGHT) + MATRIX_KEY(0x02, 0x02, KEY_C) + MATRIX_KEY(0x02, 0x03, KEY_D) + >; +}; + &hsusb1_phy { reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>; }; -- cgit v1.2.3