From 47b06fc2d97a0d98d6053357561f2953d6547d25 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sat, 13 Sep 2014 00:34:31 +0200 Subject: ARM: rockchip: add a cpufreq-cpu0 device Rockchip SoCs can sucessfully use the generic cpufreq-cpu0 driver to do frequency scaling. Therefore add a platform device in the machine init code. Signed-off-by: Heiko Stuebner --- arch/arm/mach-rockchip/rockchip.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index 8ab9e0e7ff04..eea1f06366e6 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -24,6 +24,12 @@ #include #include "core.h" +static void __init rockchip_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + platform_device_register_simple("cpufreq-cpu0", 0, NULL, 0); +} + static const char * const rockchip_board_dt_compat[] = { "rockchip,rk2928", "rockchip,rk3066a", @@ -37,4 +43,5 @@ DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, .dt_compat = rockchip_board_dt_compat, + .init_machine = rockchip_dt_init, MACHINE_END -- cgit v1.2.3 From 3eb79a5a9d46b32f63f6b9cd86f9b2bba43e127a Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 30 Sep 2014 10:33:27 +0200 Subject: ARM: rockchip: honor renaming of cpufreq-cpu0 to cpufreq-dt cpufreq-cpu0 got renamed to a more generic name cpufreq-dt, so adapt the created platform-device to this. Reported-by: Viresh Kumar Signed-off-by: Heiko Stuebner --- arch/arm/mach-rockchip/rockchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index eea1f06366e6..d226b71d21d5 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -27,7 +27,7 @@ static void __init rockchip_dt_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - platform_device_register_simple("cpufreq-cpu0", 0, NULL, 0); + platform_device_register_simple("cpufreq-dt", 0, NULL, 0); } static const char * const rockchip_board_dt_compat[] = { -- cgit v1.2.3 From be8a77c54815b311485a348547ec80803ee9415b Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sat, 13 Sep 2014 00:34:29 +0200 Subject: ARM: dts: rockchip: add operating points and armclk references Add basic OPP entries for current supported Rockchip SoCs. The operating points are currently very conservative, so individual boards may opt to redefine them. Signed-off-by: Heiko Stuebner Reviewed-by: Kever Yang --- arch/arm/boot/dts/rk3066a.dtsi | 12 +++++++++++- arch/arm/boot/dts/rk3188.dtsi | 15 ++++++++++++++- arch/arm/boot/dts/rk3288.dtsi | 19 ++++++++++++++++++- 3 files changed, 43 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index ad9c2db59670..8b11fbd58071 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -26,11 +26,21 @@ #size-cells = <0>; enable-method = "rockchip,rk3066-smp"; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; + operating-points = < + /* kHz uV */ + 1008000 1075000 + 816000 1025000 + 600000 1025000 + 504000 1000000 + 312000 975000 + >; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu@1 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ddaada788b45..ae4f04984d86 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -26,11 +26,24 @@ #size-cells = <0>; enable-method = "rockchip,rk3066-smp"; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; + operating-points = < + /* kHz uV */ + 1608000 1350000 + 1416000 1250000 + 1200000 1150000 + 1008000 1075000 + 816000 975000 + 600000 950000 + 504000 925000 + 312000 875000 + >; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu@1 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 874e66dbb93b..cb18bb457568 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -47,10 +47,27 @@ #address-cells = <1>; #size-cells = <0>; - cpu@500 { + cpu0: cpu@500 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x500>; + operating-points = < + /* KHz uV */ + 1608000 1350000 + 1512000 1300000 + 1416000 1200000 + 1200000 1100000 + 1008000 1050000 + 816000 1000000 + 696000 950000 + 600000 900000 + 408000 900000 + 312000 900000 + 216000 900000 + 126000 900000 + >; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu@501 { device_type = "cpu"; -- cgit v1.2.3 From 3adb1327fb020394a10394a5117ac7d2ec5334d3 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sat, 13 Sep 2014 00:34:30 +0200 Subject: ARM: dts: rockchip: add cpu supplies to boards This adds the cpu-supplies to the curie2, radxarock and rk3288-evb-rk808 boards. The rk3288-evb-act8846 variant cannot provide the cpu-regulator at the moment so will get its supply later. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3066a-bqcurie2.dts | 4 ++++ arch/arm/boot/dts/rk3188-radxarock.dts | 6 +++++- arch/arm/boot/dts/rk3288-evb-rk808.dts | 6 +++++- 3 files changed, 14 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index d5344510c676..baf21ac6ce7f 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -60,6 +60,10 @@ }; }; +&cpu0 { + cpu0-supply = <&vdd_arm>; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 15910c9ddbc7..0950a0524947 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -118,6 +118,10 @@ }; }; +&cpu0 { + cpu0-supply = <&vdd_arm>; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -159,7 +163,7 @@ vdd_arm: REG3 { regulator-name = "VDD_ARM"; regulator-min-microvolt = <875000>; - regulator-max-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; regulator-always-on; }; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index ff522f8e3df4..d8c775e6d5fe 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -17,6 +17,10 @@ compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; }; +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + &i2c0 { clock-frequency = <400000>; status = "okay"; @@ -44,7 +48,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; regulator-name = "vdd_arm"; }; -- cgit v1.2.3 From b3e3a7b25825407144a0178f291b20697f1537fb Mon Sep 17 00:00:00 2001 From: Julien CHAUVEAU Date: Fri, 10 Oct 2014 10:04:13 +0200 Subject: ARM: dts: rockchip: enable DMA on SPI for rk3066 and rk3188 According to the RK3066 and RK3188 TRM, the two SPI controllers support DMA handshake interface. Add the DMA properties so they can be used when needed. Signed-off-by: Julien CHAUVEAU Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3xxx.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 499468d42ada..9ba92de511ca 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -367,6 +367,8 @@ reg = <0x20070000 0x1000>; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmac2 10>, <&dmac2 11>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -378,6 +380,8 @@ reg = <0x20074000 0x1000>; #address-cells = <1>; #size-cells = <0>; + dmas = <&dmac2 12>, <&dmac2 13>; + dma-names = "tx", "rx"; status = "disabled"; }; }; -- cgit v1.2.3 From 5fe62b83cfed00b10b70593e95ffbeadf77ece78 Mon Sep 17 00:00:00 2001 From: Julien CHAUVEAU Date: Tue, 14 Oct 2014 10:16:37 +0200 Subject: ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188 Add the I2S/PCM controller nodes and pin controls for rk3066 and rk3188. Signed-off-by: Julien CHAUVEAU Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3066a.dtsi | 81 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/rk3188.dtsi | 26 ++++++++++++++ 2 files changed, 107 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 8b11fbd58071..0e99470db772 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -63,6 +63,51 @@ }; }; + i2s0: i2s@10118000 { + compatible = "rockchip,rk3066-i2s"; + reg = <0x10118000 0x2000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + dmas = <&dmac1_s 4>, <&dmac1_s 5>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + status = "disabled"; + }; + + i2s1: i2s@1011a000 { + compatible = "rockchip,rk3066-i2s"; + reg = <0x1011a000 0x2000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + dmas = <&dmac1_s 6>, <&dmac1_s 7>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>; + status = "disabled"; + }; + + i2s2: i2s@1011c000 { + compatible = "rockchip,rk3066-i2s"; + reg = <0x1011c000 0x2000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + dmas = <&dmac1_s 9>, <&dmac1_s 10>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>; + status = "disabled"; + }; + cru: clock-controller@20000000 { compatible = "rockchip,rk3066a-cru"; reg = <0x20000000 0x1000>; @@ -415,6 +460,42 @@ ; }; }; + + i2s0 { + i2s0_bus: i2s0-bus { + rockchip,pins = , + , + , + , + , + , + , + , + ; + }; + }; + + i2s1 { + i2s1_bus: i2s1-bus { + rockchip,pins = , + , + , + , + , + ; + }; + }; + + i2s2 { + i2s2_bus: i2s2-bus { + rockchip,pins = , + , + , + , + , + ; + }; + }; }; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ae4f04984d86..b24e04f6ccc7 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -78,6 +78,21 @@ }; }; + i2s0: i2s@1011a000 { + compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s"; + reg = <0x1011a000 0x2000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + dmas = <&dmac1_s 6>, <&dmac1_s 7>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + status = "disabled"; + }; + cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>; @@ -408,6 +423,17 @@ ; }; }; + + i2s0 { + i2s0_bus: i2s0-bus { + rockchip,pins = , + , + , + , + , + ; + }; + }; }; }; -- cgit v1.2.3 From cd78d0cd63ebce518b5c342fe6ef1f4613bb039d Mon Sep 17 00:00:00 2001 From: Kever Yang Date: Thu, 9 Oct 2014 21:50:30 -0700 Subject: ARM: dts: rockchip: enable init rate for clock We need to initialize PLL rate and some of bus clock rate while kernel init, for there is no other module will do that. Basically on rk3288 we use GPLL for cpu bus, peripheral bus and most of peripheral clock, CPLL for devices who require 50M/200M clock rate, leave NPLL behind for special requirement from display system. The common-clock-framework will help us to select best source for child clocks after we init the PLLs propriety. Signed-off-by: Kever Yang Reviewed-by: Doug Anderson Tested-by: Doug Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index cb18bb457568..b53e833e5667 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -472,6 +472,16 @@ rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; + assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru PLL_NPLL>, <&cru ACLK_CPU>, + <&cru HCLK_CPU>, <&cru PCLK_CPU>, + <&cru ACLK_PERI>, <&cru HCLK_PERI>, + <&cru PCLK_PERI>; + assigned-clock-rates = <594000000>, <400000000>, + <500000000>, <300000000>, + <150000000>, <75000000>, + <300000000>, <150000000>, + <75000000>; }; grf: syscon@ff770000 { -- cgit v1.2.3 From 15895a729e02ea55433b912cc31d5c6de16359ec Mon Sep 17 00:00:00 2001 From: Aravind Gopalakrishnan Date: Thu, 18 Sep 2014 14:56:45 -0500 Subject: x86, amd_nb: Add device IDs to NB tables for F15h M60h Add F3 and F4 PCI device IDs to amd_nb_misc_ids[] and amd_nb_link_ids[] respectively. Signed-off-by: Aravind Gopalakrishnan Acked-by: Thomas Gleixner Link: http://lkml.kernel.org/r/1411070205-10217-1-git-send-email-Aravind.Gopalakrishnan@amd.com Signed-off-by: Borislav Petkov --- arch/x86/kernel/amd_nb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index f04dbb3069b8..5caed1dd7ccf 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -21,6 +21,7 @@ const struct pci_device_id amd_nb_misc_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) }, {} @@ -30,6 +31,7 @@ EXPORT_SYMBOL(amd_nb_misc_ids); static const struct pci_device_id amd_nb_link_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F4) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F4) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F4) }, {} -- cgit v1.2.3 From d4da889a53d9dabe1c75384f3175dab7ff06c4ee Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 24 Sep 2014 22:48:56 +0800 Subject: ARM: sunxi: Add debug uart used by sun9i (Allwinner A80) The uarts on sun9i are still compatible with the dw_8250, but are located at different addresses. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/Kconfig.debug | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 03dc4c1a8736..0bc06ab9fb86 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -731,6 +731,14 @@ choice Say Y here if you want kernel low-level debugging support on SOCFPGA based platforms. + config DEBUG_SUN9I_UART0 + bool "Kernel low-level debugging messages via sun9i UART0" + depends on MACH_SUN9I + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Allwinner A80 based platforms on the UART0. + config DEBUG_SUNXI_UART0 bool "Kernel low-level debugging messages via sunXi UART0" depends on ARCH_SUNXI @@ -1106,6 +1114,7 @@ config DEBUG_UART_PHYS default 0x02530c00 if DEBUG_KEYSTONE_UART0 default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC + default 0x07000000 if DEBUG_SUN9I_UART0 default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT @@ -1190,6 +1199,7 @@ config DEBUG_UART_VIRT default 0xf2100000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI + default 0xf7000000 if DEBUG_SUN9I_UART0 default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ DEBUG_S3C2410_UART0) default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ -- cgit v1.2.3 From 3d4c2f1ced78fc6f74d0d9ddb25f66722f978fd1 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 8 Oct 2014 21:02:52 +0800 Subject: ARM: sunxi: Introduce Allwinner A80 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Allwinner A80 is a new Cortex octo-core A7/A15 big.LITTLE SoC. While it's processor cores and interconnecting bus are new, it re-uses many peripherals found in earlier Allwinner SoCs. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Andreas Färber --- arch/arm/mach-sunxi/Kconfig | 5 +++++ arch/arm/mach-sunxi/sunxi.c | 9 +++++++++ 2 files changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 1aaa1e15ef70..d04f84b4f937 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -42,4 +42,9 @@ config MACH_SUN8I select MFD_SUN6I_PRCM select RESET_CONTROLLER +config MACH_SUN9I + bool "Allwinner (sun9i) SoCs support" + default ARCH_SUNXI + select ARM_GIC + endif diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index d7598aeed803..1f986758784a 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -63,3 +63,12 @@ static const char * const sun8i_board_dt_compat[] = { DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family") .dt_compat = sun8i_board_dt_compat, MACHINE_END + +static const char * const sun9i_board_dt_compat[] = { + "allwinner,sun9i-a80", + NULL, +}; + +DT_MACHINE_START(SUN9I_DT, "Allwinner sun9i Family") + .dt_compat = sun9i_board_dt_compat, +MACHINE_END -- cgit v1.2.3 From 2f4bc73445fd3786b91d24b879fed527ef533cbf Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 12 Oct 2014 17:40:24 +0800 Subject: ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER for sun9i The A80 SoC has reset controls matching bus clock gates. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/mach-sunxi/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index d04f84b4f937..a77604fbaf25 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -45,6 +45,8 @@ config MACH_SUN8I config MACH_SUN9I bool "Allwinner (sun9i) SoCs support" default ARCH_SUNXI + select ARCH_HAS_RESET_CONTROLLER select ARM_GIC + select RESET_CONTROLLER endif -- cgit v1.2.3 From a99eb770b4ab561434c9049b7b09cf40e27d3a55 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 09:26:04 +0200 Subject: ARM: dts: sun7i: Add spi0_pins_a pinctrl setting Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 82097c905c48..4fb893080722 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -784,6 +784,13 @@ allwinner,pull = <0>; }; + spi0_pins_a: spi0@0 { + allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14"; + allwinner,function = "spi0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + spi1_pins_a: spi1@0 { allwinner,pins = "PI16", "PI17", "PI18", "PI19"; allwinner,function = "spi1"; -- cgit v1.2.3 From 46e9fd407fad0e9442d0feb9b678d81839ea29a1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 09:26:05 +0200 Subject: ARM: dts: sun7i: Add uart3_pins_b pinctrl setting The uart3_pins_a multiplexes the uart3 pins to port G, add a pinctrl entry for mapping them to port H (as used on the Bananapi). Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 4fb893080722..cecf32ce9ade 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -677,6 +677,13 @@ allwinner,pull = <0>; }; + uart3_pins_b: uart3@1 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "uart3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart4_pins_a: uart4@0 { allwinner,pins = "PG10", "PG11"; allwinner,function = "uart4"; -- cgit v1.2.3 From 8a5b272fbf446ce475bb434b956a45a666936af4 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 09:26:06 +0200 Subject: ARM: dts: sun7i: Add Banana Pi board The Banana Pi is an A20 based development board using Raspberry Pi compatible IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi and stereo audio out + various expenansion headers: http://www.lemaker.org/ Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-bananapi.dts | 214 +++++++++++++++++++++++++++++++ 2 files changed, 215 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapi.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..63422bde3a46 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -435,6 +435,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-hummingbird.dtb \ sun6i-a31-m9.dtb dtb-$(CONFIG_MACH_SUN7I) += \ + sun7i-a20-bananapi.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts new file mode 100644 index 000000000000..0e7c9f552b58 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -0,0 +1,214 @@ +/* + * Copyright 2014 Hans de Goede + * + * Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "LeMaker Banana Pi"; + compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; + + soc@01c00000 { + spi0: spi@01c05000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + status = "okay"; + }; + + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 0>; /* PH10 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + gmac_power_pin_bananapi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_bananapi: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + uart3: serial@01c28c00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_b>; + status = "okay"; + }; + + uart7: serial@01c29c00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bananapi>; + + green { + label = "bananapi:green:usr"; + gpios = <&pio 7 24 0>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_bananapi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + enable-active-high; + gpio = <&pio 7 23 0>; + }; +}; -- cgit v1.2.3 From 1566a6eab7cfa98eea3ccf0167eda61396234008 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 16:25:36 +0200 Subject: ARM: dts: sun7i: Add mmc2_pins_a pinctrl definition Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index cecf32ce9ade..f0a75c6523a1 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -833,6 +833,13 @@ allwinner,pull = <1>; }; + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11"; + allwinner,function = "mmc2"; + allwinner,drive = <2>; + allwinner,pull = <1>; + }; + mmc3_pins_a: mmc3@0 { allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; allwinner,function = "mmc3"; -- cgit v1.2.3 From f9554fb4763ae7c96422d54be8c0a7c15d311830 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 16:25:37 +0200 Subject: ARM: dts: sun7i: Add Mele M3 board The Mele M3 is yet another Allwinnner based Android top set box from Mele. It uses a housing similar to the A2000, but without the USM sata storage slot at the top. It features an A20 SoC, 1G RAM, 4G eMMC (unique for Allwinner devices), 100Mbit ethernet, HDMI out, 3 USB A receptacles, VGA, and A/V OUT connections. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-m3.dts | 168 +++++++++++++++++++++++++++++++++++++ 2 files changed, 169 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-m3.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 63422bde3a46..86669feaeac0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -440,6 +440,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ + sun7i-a20-m3.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts new file mode 100644 index 000000000000..ce071417e029 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -0,0 +1,168 @@ +/* + * Copyright 2014 Hans de Goede + * + * Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Mele M3"; + compatible = "mele,m3", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc2: mmc@01c11000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + led_pins_m3: led_pins@0 { + allwinner,pins = "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m3>; + + blue { + label = "m3:blue:usr"; + gpios = <&pio 7 20 0>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; +}; -- cgit v1.2.3 From 35669b39f1219ecb58ed84664545c1136d855d27 Mon Sep 17 00:00:00 2001 From: Iain Paton Date: Fri, 10 Oct 2014 14:15:24 +0100 Subject: ARM: sun7i: add support for A20-OLinuXino-Lime2 This adds support for the Olimex A20-OLinuXino-Lime2 https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2 Differences to previous Lime boards are 1GB RAM and gigabit ethernet Signed-off-by: Iain Paton Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 228 ++++++++++++++++++++++++ 2 files changed, 229 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 86669feaeac0..a84668ab774c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -442,6 +442,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-olinuxino-lime.dtb \ + sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts new file mode 100644 index 000000000000..187729a0b7d8 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -0,0 +1,228 @@ +/* + * Copyright 2014 - Iain Paton + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Olimex A20-OLinuXino-LIME2"; + compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + + acin-supply = <®_axp_ipsout>; + vin2-supply = <®_axp_ipsout>; + vin3-supply = <®_axp_ipsout>; + ldo24in-supply = <®_axp_ipsout>; + ldo3in-supply = <®_axp_ipsout>; + + regulators { + vdd_rtc: ldo1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + avcc: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_csi0: ldo3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + + vcc_csi1: ldo4 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_cpu: dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <2275000>; + regulator-always-on; + }; + + vdd_int: dcdc3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + }; + }; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; + + green { + label = "a20-olinuxino-lime2:green:usr"; + gpios = <&pio 7 2 0>; + default-state = "on"; + }; + }; + + reg_ahci_5v: ahci-5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 0>; + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_axp_ipsout: axp_ipsout { + compatible = "regulator-fixed"; + regulator-name = "axp-ipsout"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; -- cgit v1.2.3 From 4ab328f06e305bf3ea254f4e3c94bb4d820998c1 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 8 Oct 2014 21:02:53 +0800 Subject: ARM: dts: sunxi: Add Allwinner A80 dtsi MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Allwinner A80 is a new multi-purpose SoC with 4 Cortex-A7 and 4 Cortex-A15 cores in a big.LITTLE architecture, and a 64-core PowerVR G6230 GPU. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Andreas Färber --- arch/arm/boot/dts/sun9i-a80.dtsi | 257 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 257 insertions(+) create mode 100644 arch/arm/boot/dts/sun9i-a80.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi new file mode 100644 index 000000000000..5e2ec4b71f5b --- /dev/null +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -0,0 +1,257 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton64.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &r_uart; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x1>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x3>; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0x100>; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0x101>; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0x102>; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0x103>; + }; + }; + + memory { + /* 8GB max. with LPAE */ + reg = <0 0x20000000 0x02 0>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + /* + * map 64 bit address range down to 32 bits, + * as the peripherals are all under 512MB. + */ + ranges = <0 0 0 0x20000000>; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + /* + * map 64 bit address range down to 32 bits, + * as the peripherals are all under 512MB. + */ + ranges = <0 0 0 0x20000000>; + + gic: interrupt-controller@01c41000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c41000 0x1000>, + <0x01c42000 0x1000>, + <0x01c44000 0x2000>, + <0x01c46000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 0xf04>; + }; + + timer@06000c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x06000c00 0xa0>; + interrupts = <0 18 4>, + <0 19 4>, + <0 20 4>, + <0 21 4>, + <0 22 4>, + <0 23 4>; + + clocks = <&osc24M>; + }; + + uart0: serial@07000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x07000000 0x400>; + interrupts = <0 0 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart1: serial@07000400 { + compatible = "snps,dw-apb-uart"; + reg = <0x07000400 0x400>; + interrupts = <0 1 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart2: serial@07000800 { + compatible = "snps,dw-apb-uart"; + reg = <0x07000800 0x400>; + interrupts = <0 2 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart3: serial@07000c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x07000c00 0x400>; + interrupts = <0 3 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart4: serial@07001000 { + compatible = "snps,dw-apb-uart"; + reg = <0x07001000 0x400>; + interrupts = <0 4 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + uart5: serial@07001400 { + compatible = "snps,dw-apb-uart"; + reg = <0x07001400 0x400>; + interrupts = <0 5 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + r_wdt: watchdog@08001000 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x08001000 0x20>; + interrupts = <0 36 4>; + }; + + r_uart: serial@08002800 { + compatible = "snps,dw-apb-uart"; + reg = <0x08002800 0x400>; + interrupts = <0 38 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + }; +}; -- cgit v1.2.3 From f49a430c14560a263965a95ac3b86578917c6e72 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 8 Oct 2014 21:02:54 +0800 Subject: ARM: dts: sun9i: Add A80 Optimus Board support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The A80 Optimus Board is was launched with the Allwinner A80 SoC. It was jointly developed by Allwinner and Merrii. This board has a UART port, a JTAG connector, USB host ports, a USB 3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash, 4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone jack, IR receiver, and additional GPIO headers. This patch adds only basic support. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Tested-by: Andreas Färber --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/sun9i-a80-optimus.dts | 66 +++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+) create mode 100644 arch/arm/boot/dts/sun9i-a80-optimus.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a84668ab774c..766a35b2bc54 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -447,6 +447,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-ippo-q8h-v5.dtb +dtb-$(CONFIG_MACH_SUN9I) += \ + sun9i-a80-optimus.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts new file mode 100644 index 000000000000..f83abab108b9 --- /dev/null +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -0,0 +1,66 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun9i-a80.dtsi" + +/ { + model = "Merrii A80 Optimus Board"; + compatible = "merrii,a80-optimus", "allwinner,sun9i-a80"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc { + uart0: serial@07000000 { + status = "okay"; + }; + }; +}; -- cgit v1.2.3 From 6f0b7c0c6faa76c32891ef1f7ee37c7e10aeb039 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 14 Sep 2014 02:49:31 +0900 Subject: ARM: EXYNOS: Move code from hotplug.c to platsmp.c Cleanup a little the SMP/hotplug code for Exynos by: 1. Moving completely all functions from hotplug.c into the platsmp.c; 2. Deleting the hotplug.c file. After recent cleanups (e.g. 75ad2ab28f0f "ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling") there was only CPU power down related code in hotplug.c file. Rationale behind the code movement and benefits: 1. The file platsmp.c is the only user of code located in hotplug.c. Keeping code in hotplug.c required declaring exynos_cpu_die() in common.h. Such dependencies and mentioned exynos_cpu_die() declaration can be removed. 2. In next patches exynos_set_delayed_reset_assertion() will be introduced. This function will be called by: - cpu_leave_power (hotplug.c), - platform_do_lowpower (hotplug.c), - exynos_boot_secondary (platsmp.c). Merging hotplug.c into platsmp.c leads to simpler and cleaner code with less dependencies between files. The commit only moves code around with one additional observable change: the hotplug.c was compiled with custom CFLAGS (-march=armv7-a). These CFLAGS are not necessary any more. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Makefile | 3 -- arch/arm/mach-exynos/common.h | 2 - arch/arm/mach-exynos/hotplug.c | 91 ------------------------------------------ arch/arm/mach-exynos/platsmp.c | 74 ++++++++++++++++++++++++++++++++++ 4 files changed, 74 insertions(+), 96 deletions(-) delete mode 100644 arch/arm/mach-exynos/hotplug.c (limited to 'arch') diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 27ae6144679c..d634de588d96 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -16,9 +16,6 @@ obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -CFLAGS_hotplug.o += -march=armv7-a - plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 47b904b3b973..3d3e6af9d015 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -130,8 +130,6 @@ extern void exynos_cpu_resume(void); extern struct smp_operations exynos_smp_ops; -extern void exynos_cpu_die(unsigned int cpu); - /* PMU(Power Management Unit) support */ #define PMU_TABLE_END (-1U) diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c deleted file mode 100644 index 4d86961a7957..000000000000 --- a/arch/arm/mach-exynos/hotplug.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Cloned from linux/arch/arm/mach-realview/hotplug.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include -#include -#include - -#include "common.h" -#include "regs-pmu.h" - -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - -static inline void platform_do_lowpower(unsigned int cpu, int *spurious) -{ - u32 mpidr = cpu_logical_map(cpu); - u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); - - for (;;) { - - /* Turn the CPU off on next WFI instruction. */ - exynos_cpu_power_down(core_id); - - wfi(); - - if (pen_release == core_id) { - /* - * OK, proper wakeup, we're done - */ - break; - } - - /* - * Getting here, means that we have come out of WFI without - * having been woken up - this shouldn't happen - * - * Just note it happening - when we're woken, we can report - * its occurrence. - */ - (*spurious)++; - } -} - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void __ref exynos_cpu_die(unsigned int cpu) -{ - int spurious = 0; - - v7_exit_coherency_flush(louis); - - platform_do_lowpower(cpu, &spurious); - - /* - * bring this CPU back into the world of cache - * coherency, and then restore interrupts - */ - cpu_leave_lowpower(); - - if (spurious) - pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); -} diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 41ae28d69e6f..87a73eec9b36 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -22,6 +22,7 @@ #include #include +#include #include #include #include @@ -33,6 +34,54 @@ extern void exynos4_secondary_startup(void); +#ifdef CONFIG_HOTPLUG_CPU +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( + "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + +static inline void platform_do_lowpower(unsigned int cpu, int *spurious) +{ + u32 mpidr = cpu_logical_map(cpu); + u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); + + for (;;) { + + /* Turn the CPU off on next WFI instruction. */ + exynos_cpu_power_down(core_id); + + wfi(); + + if (pen_release == core_id) { + /* + * OK, proper wakeup, we're done + */ + break; + } + + /* + * Getting here, means that we have come out of WFI without + * having been woken up - this shouldn't happen + * + * Just note it happening - when we're woken, we can report + * its occurrence. + */ + (*spurious)++; + } +} +#endif /* CONFIG_HOTPLUG_CPU */ + /** * exynos_core_power_down : power down the specified cpu * @cpu : the cpu to power down @@ -318,6 +367,31 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) } } +#ifdef CONFIG_HOTPLUG_CPU +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +static void __ref exynos_cpu_die(unsigned int cpu) +{ + int spurious = 0; + + v7_exit_coherency_flush(louis); + + platform_do_lowpower(cpu, &spurious); + + /* + * bring this CPU back into the world of cache + * coherency, and then restore interrupts + */ + cpu_leave_lowpower(); + + if (spurious) + pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); +} +#endif /* CONFIG_HOTPLUG_CPU */ + struct smp_operations exynos_smp_ops __initdata = { .smp_init_cpus = exynos_smp_init_cpus, .smp_prepare_cpus = exynos_smp_prepare_cpus, -- cgit v1.2.3 From 27b9ee852cce3baec47af0b88a62cea62a5dd84d Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 14 Sep 2014 02:49:32 +0900 Subject: ARM: EXYNOS: Remove unneeded __ref annotation for cpu_die function The __ref annotation for exynos_cpu_die() is not needed because the function does not reference any __init/__exit symbol or call. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/platsmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 87a73eec9b36..5d277924ef77 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -373,7 +373,7 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) * * Called with IRQs disabled */ -static void __ref exynos_cpu_die(unsigned int cpu) +static void exynos_cpu_die(unsigned int cpu) { int spurious = 0; -- cgit v1.2.3 From 13cfa6c4f7facfc690ba9e99ec382c151fddaced Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 14 Sep 2014 02:49:32 +0900 Subject: ARM: EXYNOS: Fix CPU idle clock down after CPU off On Exynos4 USE_DELAYED_RESET_ASSERTION must be set in ARM_COREx_OPTION register during CPU power down. This is the proper way of powering down CPU on Exynos4. Additionally on Exynos4212 without this the CPU clock down feature won't work after powering down some CPU and the online CPUs will work at full frequency chosen by CPUfreq governor. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/platsmp.c | 43 +++++++++++++++++++++++++++++++++++++++-- arch/arm/mach-exynos/regs-pmu.h | 3 +++ 2 files changed, 44 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 5d277924ef77..9c6dd1451136 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -34,8 +34,32 @@ extern void exynos4_secondary_startup(void); +/* + * Set or clear the USE_DELAYED_RESET_ASSERTION option, set on Exynos4 SoCs + * during hot-(un)plugging CPUx. + * + * The feature can be cleared safely during first boot of secondary CPU. + * + * Exynos4 SoCs require setting USE_DELAYED_RESET_ASSERTION during powering + * down a CPU so the CPU idle clock down feature could properly detect global + * idle state when CPUx is off. + */ +static void exynos_set_delayed_reset_assertion(u32 core_id, bool enable) +{ + if (soc_is_exynos4()) { + unsigned int tmp; + + tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id)); + if (enable) + tmp |= S5P_USE_DELAYED_RESET_ASSERTION; + else + tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION); + pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id)); + } +} + #ifdef CONFIG_HOTPLUG_CPU -static inline void cpu_leave_lowpower(void) +static inline void cpu_leave_lowpower(u32 core_id) { unsigned int v; @@ -49,6 +73,8 @@ static inline void cpu_leave_lowpower(void) : "=&r" (v) : "Ir" (CR_C), "Ir" (0x40) : "cc"); + + exynos_set_delayed_reset_assertion(core_id, false); } static inline void platform_do_lowpower(unsigned int cpu, int *spurious) @@ -61,6 +87,14 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) /* Turn the CPU off on next WFI instruction. */ exynos_cpu_power_down(core_id); + /* + * Exynos4 SoCs require setting + * USE_DELAYED_RESET_ASSERTION so the CPU idle + * clock down feature could properly detect + * global idle state when CPUx is off. + */ + exynos_set_delayed_reset_assertion(core_id, true); + wfi(); if (pen_release == core_id) { @@ -286,6 +320,9 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) udelay(10); } + /* No harm if this is called during first boot of secondary CPU */ + exynos_set_delayed_reset_assertion(core_id, false); + /* * now the secondary core is starting up let it run its * calibrations, then wait for it to finish @@ -376,6 +413,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) static void exynos_cpu_die(unsigned int cpu) { int spurious = 0; + u32 mpidr = cpu_logical_map(cpu); + u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); v7_exit_coherency_flush(louis); @@ -385,7 +424,7 @@ static void exynos_cpu_die(unsigned int cpu) * bring this CPU back into the world of cache * coherency, and then restore interrupts */ - cpu_leave_lowpower(); + cpu_leave_lowpower(core_id); if (spurious) pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index 96a1569262b5..4e9b4440e2bd 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -20,6 +20,7 @@ #define S5P_USE_STANDBY_WFI0 (1 << 16) #define S5P_USE_STANDBY_WFE0 (1 << 24) +#define S5P_USE_DELAYED_RESET_ASSERTION BIT(12) #define EXYNOS_SWRESET 0x0400 #define EXYNOS5440_SWRESET 0x00C4 @@ -106,6 +107,8 @@ (EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr))) #define EXYNOS_ARM_CORE_STATUS(_nr) \ (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4) +#define EXYNOS_ARM_CORE_OPTION(_nr) \ + (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x8) #define EXYNOS_ARM_COMMON_CONFIGURATION 0x2500 #define EXYNOS_COMMON_CONFIGURATION(_nr) \ -- cgit v1.2.3 From 32ed35ff22ec03d8a935dfe8b90c599da4b4cb02 Mon Sep 17 00:00:00 2001 From: Vikas Sajjan Date: Wed, 24 Sep 2014 16:45:13 +0900 Subject: ARM: EXYNOS: Move Disabling of JPEG USE_RETENTION for exynos5250 to pmu.c Move the Disabling of JPEG USE_RETENTION for exynos5250 to pmu.c to make way for refactoring of pm.c and to create common functions across exynos4 and exynos5250. Signed-off-by: Vikas Sajjan Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/pm.c | 7 +------ arch/arm/mach-exynos/pmu.c | 1 + 2 files changed, 2 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index abefacb45976..31e209b38f41 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -255,13 +255,8 @@ static void exynos_pm_prepare(void) s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (soc_is_exynos5250()) { + if (soc_is_exynos5250()) s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save)); - /* Disable USE_RETENTION of JPEG_MEM_OPTION */ - tmp = pmu_raw_readl(EXYNOS5_JPEG_MEM_OPTION); - tmp &= ~EXYNOS5_OPTION_USE_RETENTION; - pmu_raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION); - } /* Set value of power down register for sleep mode */ diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index ff9d23f0a7d9..cfc62e86cdee 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -264,6 +264,7 @@ static const struct exynos_pmu_conf exynos5250_pmu_config[] = { { EXYNOS5_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, { EXYNOS5_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, { EXYNOS5_JPEG_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, + { EXYNOS5_JPEG_MEM_OPTION, { 0x10, 0x10, 0x0} }, { EXYNOS5_HSI_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, { EXYNOS5_MCUIOP_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, { EXYNOS5_SATA_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} }, -- cgit v1.2.3 From 066da1ae52c30ae7e2792dbbb0d6bcbba493245e Mon Sep 17 00:00:00 2001 From: Vikas Sajjan Date: Wed, 24 Sep 2014 16:45:14 +0900 Subject: ARM: EXYNOS: Refactor the pm code to use DT based lookup Refactoring the pm.c to avoid using "soc_is_exynos" checks, instead use the DT based lookup. While at it, consolidate the common code across SoCs and create static helper functions. Signed-off-by: Vikas Sajjan Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/pm.c | 167 ++++++++++++++++++++++++++++++---------- arch/arm/mach-exynos/regs-pmu.h | 1 + 2 files changed, 126 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 31e209b38f41..16b23d156eec 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -36,6 +36,8 @@ #include "regs-pmu.h" #include "regs-sys.h" +#define REG_TABLE_END (-1U) + /** * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping * @hwirq: Hardware IRQ signal of the GIC @@ -59,6 +61,21 @@ static struct sleep_save exynos_core_save[] = { SAVE_ITEM(S5P_SROM_BC3), }; +struct exynos_pm_data { + const struct exynos_wkup_irq *wkup_irq; + struct sleep_save *extra_save; + int num_extra_save; + unsigned int wake_disable_mask; + unsigned int *release_ret_regs; + + void (*pm_prepare)(void); + void (*pm_resume)(void); + int (*pm_suspend)(void); + int (*cpu_suspend)(unsigned long); +}; + +struct exynos_pm_data *pm_data; + /* * GIC wake-up support */ @@ -77,14 +94,24 @@ static const struct exynos_wkup_irq exynos5250_wkup_irq[] = { { /* sentinel */ }, }; +unsigned int exynos_release_ret_regs[] = { + S5P_PAD_RET_MAUDIO_OPTION, + S5P_PAD_RET_GPIO_OPTION, + S5P_PAD_RET_UART_OPTION, + S5P_PAD_RET_MMCA_OPTION, + S5P_PAD_RET_MMCB_OPTION, + S5P_PAD_RET_EBIA_OPTION, + S5P_PAD_RET_EBIB_OPTION, + REG_TABLE_END, +}; + static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) { const struct exynos_wkup_irq *wkup_irq; - if (soc_is_exynos5250()) - wkup_irq = exynos5250_wkup_irq; - else - wkup_irq = exynos4_wkup_irq; + if (!pm_data->wkup_irq) + return -ENOENT; + wkup_irq = pm_data->wkup_irq; while (wkup_irq->mask) { if (wkup_irq->hwirq == data->hwirq) { @@ -229,15 +256,8 @@ void exynos_enter_aftr(void) cpu_pm_exit(); } -static int exynos_cpu_suspend(unsigned long arg) +static int exynos_cpu_do_idle(void) { -#ifdef CONFIG_CACHE_L2X0 - outer_flush_all(); -#endif - - if (soc_is_exynos5250()) - flush_cache_all(); - /* issue the standby signal into the pm unit. */ cpu_do_idle(); @@ -245,29 +265,44 @@ static int exynos_cpu_suspend(unsigned long arg) return 1; /* Aborting suspend */ } -static void exynos_pm_prepare(void) +static int exynos_cpu_suspend(unsigned long arg) { - unsigned int tmp; + flush_cache_all(); + outer_flush_all(); + return exynos_cpu_do_idle(); +} +static void exynos_pm_set_wakeup_mask(void) +{ /* Set wake-up mask registers */ pmu_raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK); pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); +} - s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - - if (soc_is_exynos5250()) - s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save)); - +static void exynos_pm_enter_sleep_mode(void) +{ /* Set value of power down register for sleep mode */ - exynos_sys_powerdown_conf(SYS_SLEEP); pmu_raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1); /* ensure at least INFORM0 has the resume address */ - pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); } +static void exynos_pm_prepare(void) +{ + /* Set wake-up mask registers */ + exynos_pm_set_wakeup_mask(); + + s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); + + if (pm_data->extra_save) + s3c_pm_do_save(pm_data->extra_save, + pm_data->num_extra_save); + + exynos_pm_enter_sleep_mode(); +} + static int exynos_pm_suspend(void) { unsigned long tmp; @@ -285,6 +320,15 @@ static int exynos_pm_suspend(void) return 0; } +static void exynos_pm_release_retention(void) +{ + unsigned int i; + + for (i = 0; (pm_data->release_ret_regs[i] != REG_TABLE_END); i++) + pmu_raw_writel(EXYNOS_WAKEUP_FROM_LOWPWR, + pm_data->release_ret_regs[i]); +} + static void exynos_pm_resume(void) { if (exynos_pm_central_resume()) @@ -294,18 +338,11 @@ static void exynos_pm_resume(void) exynos_cpu_restore_register(); /* For release retention */ + exynos_pm_release_retention(); - pmu_raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); - pmu_raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION); - pmu_raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION); - pmu_raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION); - pmu_raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION); - pmu_raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION); - pmu_raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION); - - if (soc_is_exynos5250()) - s3c_pm_do_restore(exynos5_sys_save, - ARRAY_SIZE(exynos5_sys_save)); + if (pm_data->extra_save) + s3c_pm_do_restore_core(pm_data->extra_save, + pm_data->num_extra_save); s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); @@ -316,15 +353,8 @@ early_wakeup: /* Clear SLEEP mode set in INFORM1 */ pmu_raw_writel(0x0, S5P_INFORM1); - - return; } -static struct syscore_ops exynos_pm_syscore_ops = { - .suspend = exynos_pm_suspend, - .resume = exynos_pm_resume, -}; - /* * Suspend Ops */ @@ -348,11 +378,12 @@ static int exynos_suspend_enter(suspend_state_t state) } s3c_pm_save_uarts(); - exynos_pm_prepare(); + if (pm_data->pm_prepare) + pm_data->pm_prepare(); flush_cache_all(); s3c_pm_check_store(); - ret = cpu_suspend(0, exynos_cpu_suspend); + ret = cpu_suspend(0, pm_data->cpu_suspend); if (ret) return ret; @@ -387,18 +418,70 @@ static const struct platform_suspend_ops exynos_suspend_ops = { .valid = suspend_valid_only_mem, }; +static const struct exynos_pm_data exynos4_pm_data = { + .wkup_irq = exynos4_wkup_irq, + .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), + .release_ret_regs = exynos_release_ret_regs, + .pm_suspend = exynos_pm_suspend, + .pm_resume = exynos_pm_resume, + .pm_prepare = exynos_pm_prepare, + .cpu_suspend = exynos_cpu_suspend, +}; + +static const struct exynos_pm_data exynos5250_pm_data = { + .wkup_irq = exynos5250_wkup_irq, + .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), + .release_ret_regs = exynos_release_ret_regs, + .extra_save = exynos5_sys_save, + .num_extra_save = ARRAY_SIZE(exynos5_sys_save), + .pm_suspend = exynos_pm_suspend, + .pm_resume = exynos_pm_resume, + .pm_prepare = exynos_pm_prepare, + .cpu_suspend = exynos_cpu_suspend, +}; + +static struct of_device_id exynos_pmu_of_device_ids[] = { + { + .compatible = "samsung,exynos4210-pmu", + .data = &exynos4_pm_data, + }, { + .compatible = "samsung,exynos4212-pmu", + .data = &exynos4_pm_data, + }, { + .compatible = "samsung,exynos4412-pmu", + .data = &exynos4_pm_data, + }, { + .compatible = "samsung,exynos5250-pmu", + .data = &exynos5250_pm_data, + }, + { /*sentinel*/ }, +}; + +static struct syscore_ops exynos_pm_syscore_ops; + void __init exynos_pm_init(void) { + const struct of_device_id *match; u32 tmp; + of_find_matching_node_and_match(NULL, exynos_pmu_of_device_ids, &match); + if (!match) { + pr_err("Failed to find PMU node\n"); + return; + } + pm_data = (struct exynos_pm_data *) match->data; + /* Platform-specific GIC callback */ gic_arch_extn.irq_set_wake = exynos_irq_set_wake; /* All wakeup disable */ tmp = pmu_raw_readl(S5P_WAKEUP_MASK); - tmp |= ((0xFF << 8) | (0x1F << 1)); + tmp |= pm_data->wake_disable_mask; pmu_raw_writel(tmp, S5P_WAKEUP_MASK); + exynos_pm_syscore_ops.suspend = pm_data->pm_suspend; + exynos_pm_syscore_ops.resume = pm_data->pm_resume; + register_syscore_ops(&exynos_pm_syscore_ops); suspend_set_ops(&exynos_suspend_ops); } diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index 96a1569262b5..30c03017aa6a 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -21,6 +21,7 @@ #define S5P_USE_STANDBY_WFI0 (1 << 16) #define S5P_USE_STANDBY_WFE0 (1 << 24) +#define EXYNOS_WAKEUP_FROM_LOWPWR (1 << 28) #define EXYNOS_SWRESET 0x0400 #define EXYNOS5440_SWRESET 0x00C4 -- cgit v1.2.3 From 9c261f89a30010a33c15e6b7cfc7c79ae6bea653 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 24 Sep 2014 01:24:35 +0900 Subject: ARM: firmware: Introduce suspend and resume operations This patch extends the firmware_ops structure with two new callbacks: .suspend() and .resume(). The former is intended to ask the firmware to save all its volatile state and suspend the system, without returning back to the kernel in between. The latter is to be called early by very low level platform suspend code after waking up to restore low level hardware state, which can't be restored in non-secure mode. While at it, outdated version of the structure is removed from the documentation and replaced with a reference to the header file. Signed-off-by: Tomasz Figa Acked-by: Alexandre Courbot Signed-off-by: Kukjin Kim --- Documentation/arm/firmware.txt | 28 +++++----------------------- arch/arm/include/asm/firmware.h | 8 ++++++++ 2 files changed, 13 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/Documentation/arm/firmware.txt b/Documentation/arm/firmware.txt index c2e468fe7b0b..da6713adac8a 100644 --- a/Documentation/arm/firmware.txt +++ b/Documentation/arm/firmware.txt @@ -7,32 +7,14 @@ world, which changes the way some things have to be initialized. This makes a need to provide an interface for such platforms to specify available firmware operations and call them when needed. -Firmware operations can be specified using struct firmware_ops - - struct firmware_ops { - /* - * Enters CPU idle mode - */ - int (*do_idle)(void); - /* - * Sets boot address of specified physical CPU - */ - int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr); - /* - * Boots specified physical CPU - */ - int (*cpu_boot)(int cpu); - /* - * Initializes L2 cache - */ - int (*l2x0_init)(void); - }; - -and then registered with register_firmware_ops function +Firmware operations can be specified by filling in a struct firmware_ops +with appropriate callbacks and then registering it with register_firmware_ops() +function. void register_firmware_ops(const struct firmware_ops *ops) -the ops pointer must be non-NULL. +The ops pointer must be non-NULL. More information about struct firmware_ops +and its members can be found in arch/arm/include/asm/firmware.h header. There is a default, empty set of operations provided, so there is no need to set anything if platform does not require firmware operations. diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h index 2c9f10df7568..5904f59b0409 100644 --- a/arch/arm/include/asm/firmware.h +++ b/arch/arm/include/asm/firmware.h @@ -41,6 +41,14 @@ struct firmware_ops { * Initializes L2 cache */ int (*l2x0_init)(void); + /* + * Enter system-wide suspend. + */ + int (*suspend)(void); + /* + * Restore state of privileged hardware after system-wide suspend. + */ + int (*resume)(void); }; /* Global pointer for current firmware_ops structure, can't be NULL. */ -- cgit v1.2.3 From 2b9d9c321b5900c7ce82110a81cf3827ca9b33c6 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 24 Sep 2014 01:24:39 +0900 Subject: ARM: EXYNOS: Add support for firmware-assisted suspend/resume On a numer of Exynos-based boards Linux kernel is running in non-secure mode under a secure firmware. This means that certain operations need to be handled in special way, with firmware assistance. System-wide suspend/resume is an example of such operations. This patch adds support for firmware-assisted suspend/resume by leveraging recently introduced suspend and resume firmware operations and modifying existing suspend/resume paths to account for presence of secure firmware. Signed-off-by: Tomasz Figa [kgene.kim@samsung.com: rebased] Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Makefile | 1 + arch/arm/mach-exynos/common.h | 4 ++++ arch/arm/mach-exynos/firmware.c | 45 +++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-exynos/pm.c | 16 ++++++++++----- arch/arm/mach-exynos/sleep.S | 28 +++++++++++++++++++++++++ arch/arm/mach-exynos/smc.h | 4 ++++ 6 files changed, 93 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 27ae6144679c..45bef21a3b66 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -21,6 +21,7 @@ CFLAGS_hotplug.o += -march=armv7-a plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) +AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec) obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o CFLAGS_mcpm-exynos.o += -march=armv7-a diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 47b904b3b973..c218200f8544 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -111,6 +111,9 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK) #define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \ soc_is_exynos5420() || soc_is_exynos5800()) +extern u32 cp15_save_diag; +extern u32 cp15_save_power; + extern void __iomem *sysram_ns_base_addr; extern void __iomem *sysram_base_addr; extern void __iomem *pmu_base_addr; @@ -127,6 +130,7 @@ static inline void exynos_pm_init(void) {} #endif extern void exynos_cpu_resume(void); +extern void exynos_cpu_resume_ns(void); extern struct smp_operations exynos_smp_ops; diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index e8797bb78871..f5e626d55951 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -14,13 +14,20 @@ #include #include +#include +#include #include +#include #include #include "common.h" #include "smc.h" +#define EXYNOS_SLEEP_MAGIC 0x00000bad +#define EXYNOS_BOOT_ADDR 0x8 +#define EXYNOS_BOOT_FLAG 0xc + static int exynos_do_idle(void) { exynos_smc(SMC_CMD_SLEEP, 0, 0, 0); @@ -69,10 +76,48 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) return 0; } +static int exynos_cpu_suspend(unsigned long arg) +{ + flush_cache_all(); + outer_flush_all(); + + exynos_smc(SMC_CMD_SLEEP, 0, 0, 0); + + pr_info("Failed to suspend the system\n"); + writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG); + return 1; +} + +static int exynos_suspend(void) +{ + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { + /* Save Power control and Diagnostic registers */ + asm ("mrc p15, 0, %0, c15, c0, 0\n" + "mrc p15, 0, %1, c15, c0, 1\n" + : "=r" (cp15_save_power), "=r" (cp15_save_diag) + : : "cc"); + } + + writel(EXYNOS_SLEEP_MAGIC, sysram_ns_base_addr + EXYNOS_BOOT_FLAG); + writel(virt_to_phys(exynos_cpu_resume_ns), + sysram_ns_base_addr + EXYNOS_BOOT_ADDR); + + return cpu_suspend(0, exynos_cpu_suspend); +} + +static int exynos_resume(void) +{ + writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG); + + return 0; +} + static const struct firmware_ops exynos_firmware_ops = { .do_idle = exynos_do_idle, .set_cpu_boot_addr = exynos_set_cpu_boot_addr, .cpu_boot = exynos_cpu_boot, + .suspend = exynos_suspend, + .resume = exynos_resume, }; void __init exynos_firmware_init(void) diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 16b23d156eec..047ac302835d 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -23,6 +23,7 @@ #include #include +#include #include #include #include @@ -331,12 +332,11 @@ static void exynos_pm_release_retention(void) static void exynos_pm_resume(void) { + u32 cpuid = read_cpuid_part(); + if (exynos_pm_central_resume()) goto early_wakeup; - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) - exynos_cpu_restore_register(); - /* For release retention */ exynos_pm_release_retention(); @@ -346,9 +346,13 @@ static void exynos_pm_resume(void) s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) + if (cpuid == ARM_CPU_PART_CORTEX_A9) scu_enable(S5P_VA_SCU); + if (call_firmware_op(resume) == -ENOSYS + && cpuid == ARM_CPU_PART_CORTEX_A9) + exynos_cpu_restore_register(); + early_wakeup: /* Clear SLEEP mode set in INFORM1 */ @@ -383,7 +387,9 @@ static int exynos_suspend_enter(suspend_state_t state) flush_cache_all(); s3c_pm_check_store(); - ret = cpu_suspend(0, pm_data->cpu_suspend); + ret = call_firmware_op(suspend); + if (ret == -ENOSYS) + ret = cpu_suspend(0, pm_data->cpu_suspend); if (ret) return ret; diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S index 108a45f4bb62..e3c373082bbe 100644 --- a/arch/arm/mach-exynos/sleep.S +++ b/arch/arm/mach-exynos/sleep.S @@ -16,6 +16,7 @@ */ #include +#include "smc.h" #define CPU_MASK 0xff0ffff0 #define CPU_CORTEX_A9 0x410fc090 @@ -55,3 +56,30 @@ ENTRY(exynos_cpu_resume) #endif b cpu_resume ENDPROC(exynos_cpu_resume) + + .align + +ENTRY(exynos_cpu_resume_ns) + mrc p15, 0, r0, c0, c0, 0 + ldr r1, =CPU_MASK + and r0, r0, r1 + ldr r1, =CPU_CORTEX_A9 + cmp r0, r1 + bne skip_cp15 + + adr r0, cp15_save_power + ldr r1, [r0] + adr r0, cp15_save_diag + ldr r2, [r0] + mov r0, #SMC_CMD_C15RESUME + dsb + smc #0 +skip_cp15: + b cpu_resume +ENDPROC(exynos_cpu_resume_ns) + .globl cp15_save_diag +cp15_save_diag: + .long 0 @ cp15 diagnostic + .globl cp15_save_power +cp15_save_power: + .long 0 @ cp15 power control diff --git a/arch/arm/mach-exynos/smc.h b/arch/arm/mach-exynos/smc.h index 13a1dc8ecbf2..f7b82f9c1e21 100644 --- a/arch/arm/mach-exynos/smc.h +++ b/arch/arm/mach-exynos/smc.h @@ -26,6 +26,10 @@ #define SMC_CMD_L2X0INVALL (-24) #define SMC_CMD_L2X0DEBUG (-25) +#ifndef __ASSEMBLY__ + extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3); +#endif /* __ASSEMBLY__ */ + #endif -- cgit v1.2.3 From 134abc297e43438cdb47f30fc673680b16bc6339 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 25 Sep 2014 17:59:40 +0900 Subject: ARM: EXYNOS: replace EXYNOS_BOOT_VECTOR_* macros by static inlines Replace EXYNOS_BOOT_VECTOR_ADDR and EXYNOS_BOOT_VECTOR_FLAG macros by exynos_boot_vector_addr() and exynos_boot_vector_flag() static inlines. This patch shouldn't cause any functionality changes. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Acked-by: Daniel Lezcano Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/pm.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 047ac302835d..3407fc162449 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -128,16 +128,23 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) return -ENOENT; } -#define EXYNOS_BOOT_VECTOR_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ - pmu_base_addr + S5P_INFORM7 : \ - (samsung_rev() == EXYNOS4210_REV_1_0 ? \ - (sysram_base_addr + 0x24) : \ - pmu_base_addr + S5P_INFORM0)) -#define EXYNOS_BOOT_VECTOR_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ - pmu_base_addr + S5P_INFORM6 : \ - (samsung_rev() == EXYNOS4210_REV_1_0 ? \ - (sysram_base_addr + 0x20) : \ - pmu_base_addr + S5P_INFORM1)) +static inline void __iomem *exynos_boot_vector_addr(void) +{ + if (samsung_rev() == EXYNOS4210_REV_1_1) + return pmu_base_addr + S5P_INFORM7; + else if (samsung_rev() == EXYNOS4210_REV_1_0) + return sysram_base_addr + 0x24; + return pmu_base_addr + S5P_INFORM0; +} + +static inline void __iomem *exynos_boot_vector_flag(void) +{ + if (samsung_rev() == EXYNOS4210_REV_1_1) + return pmu_base_addr + S5P_INFORM6; + else if (samsung_rev() == EXYNOS4210_REV_1_0) + return sysram_base_addr + 0x20; + return pmu_base_addr + S5P_INFORM1; +} #define S5P_CHECK_AFTR 0xFCBA0D10 #define S5P_CHECK_SLEEP 0x00000BAD @@ -222,8 +229,9 @@ static void exynos_set_wakeupmask(long mask) static void exynos_cpu_set_boot_vector(long flags) { - __raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR); - __raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG); + __raw_writel(virt_to_phys(exynos_cpu_resume), + exynos_boot_vector_addr()); + __raw_writel(flags, exynos_boot_vector_flag()); } static int exynos_aftr_finisher(unsigned long flags) -- cgit v1.2.3 From 0b7778a801fde0eacd5ee08242290273507e60a2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 25 Sep 2014 17:59:41 +0900 Subject: ARM: firmware: add AFTR mode support to firmware do_idle method On some platforms (i.e. EXYNOS ones) more than one idle mode is available and we need to distinguish them in firmware do_idle method. Add mode parameter to do_idle firmware method and AFTR mode support to EXYNOS do_idle implementation. This change is a preparation for adding secure firmware support to EXYNOS cpuidle driver. This patch shouldn't cause any functionality changes. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Acked-by: Thierry Reding Signed-off-by: Kukjin Kim --- arch/arm/include/asm/firmware.h | 2 +- arch/arm/mach-exynos/common.h | 5 +++++ arch/arm/mach-exynos/firmware.c | 10 ++++++++-- arch/arm/mach-tegra/cpuidle-tegra114.c | 2 +- 4 files changed, 15 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h index 5904f59b0409..89aefe10d66b 100644 --- a/arch/arm/include/asm/firmware.h +++ b/arch/arm/include/asm/firmware.h @@ -28,7 +28,7 @@ struct firmware_ops { /* * Enters CPU idle mode */ - int (*do_idle)(void); + int (*do_idle)(unsigned long mode); /* * Sets boot address of specified physical CPU */ diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index c218200f8544..2d830df0f647 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -119,6 +119,11 @@ extern void __iomem *sysram_base_addr; extern void __iomem *pmu_base_addr; void exynos_sysram_init(void); +enum { + FW_DO_IDLE_SLEEP, + FW_DO_IDLE_AFTR, +}; + void exynos_firmware_init(void); extern u32 exynos_get_eint_wake_mask(void); diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index f5e626d55951..e57b7c3039a2 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -28,9 +28,15 @@ #define EXYNOS_BOOT_ADDR 0x8 #define EXYNOS_BOOT_FLAG 0xc -static int exynos_do_idle(void) +static int exynos_do_idle(unsigned long mode) { - exynos_smc(SMC_CMD_SLEEP, 0, 0, 0); + switch (mode) { + case FW_DO_IDLE_AFTR: + exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0); + break; + case FW_DO_IDLE_SLEEP: + exynos_smc(SMC_CMD_SLEEP, 0, 0, 0); + } return 0; } diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c index e3ebdce3e71f..425b6c8f0cb0 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c @@ -49,7 +49,7 @@ static int tegra114_idle_power_down(struct cpuidle_device *dev, call_firmware_op(prepare_idle); /* Do suspend by ourselves if the firmware does not implement it */ - if (call_firmware_op(do_idle) == -ENOSYS) + if (call_firmware_op(do_idle, 0) == -ENOSYS) cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); -- cgit v1.2.3 From a135e20185fe6f0258fa6837455043f3063601d8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 25 Sep 2014 17:59:41 +0900 Subject: ARM: EXYNOS: add secure firmware support to AFTR mode code * Move cp15 registers saving to exynos_save_cp15() helper and add additional helper usage to do_idle firmware method. * Use resume firmware method instead of exynos_cpu_restore_register() and skip exynos_cpu_save_register() on boards with secure firmware enabled. * Use sysram_ns_base_addr + 0x24/0x20 addresses instead of the default ones used by exynos_cpu_set_boot_vector() on boards with secure firmware enabled. * Use do_idle firmware method instead of cpu_do_idle() on boards with secure firmware enabled. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/firmware.c | 24 +++++++++++++++++------- arch/arm/mach-exynos/pm.c | 17 ++++++++++++----- 2 files changed, 29 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index e57b7c3039a2..2c5bc6bfcbdf 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -25,13 +25,28 @@ #include "smc.h" #define EXYNOS_SLEEP_MAGIC 0x00000bad +#define EXYNOS_AFTR_MAGIC 0xfcba0d10 #define EXYNOS_BOOT_ADDR 0x8 #define EXYNOS_BOOT_FLAG 0xc +static void exynos_save_cp15(void) +{ + /* Save Power control and Diagnostic registers */ + asm ("mrc p15, 0, %0, c15, c0, 0\n" + "mrc p15, 0, %1, c15, c0, 1\n" + : "=r" (cp15_save_power), "=r" (cp15_save_diag) + : : "cc"); +} + static int exynos_do_idle(unsigned long mode) { switch (mode) { case FW_DO_IDLE_AFTR: + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) + exynos_save_cp15(); + __raw_writel(virt_to_phys(exynos_cpu_resume_ns), + sysram_ns_base_addr + 0x24); + __raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20); exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0); break; case FW_DO_IDLE_SLEEP: @@ -96,13 +111,8 @@ static int exynos_cpu_suspend(unsigned long arg) static int exynos_suspend(void) { - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { - /* Save Power control and Diagnostic registers */ - asm ("mrc p15, 0, %0, c15, c0, 0\n" - "mrc p15, 0, %1, c15, c0, 1\n" - : "=r" (cp15_save_power), "=r" (cp15_save_diag) - : : "cc"); - } + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) + exynos_save_cp15(); writel(EXYNOS_SLEEP_MAGIC, sysram_ns_base_addr + EXYNOS_BOOT_FLAG); writel(virt_to_phys(exynos_cpu_resume_ns), diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 3407fc162449..6796fce923e2 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -236,11 +236,19 @@ static void exynos_cpu_set_boot_vector(long flags) static int exynos_aftr_finisher(unsigned long flags) { + int ret; + exynos_set_wakeupmask(0x0000ff3e); - exynos_cpu_set_boot_vector(S5P_CHECK_AFTR); /* Set value of power down register for aftr mode */ exynos_sys_powerdown_conf(SYS_AFTR); - cpu_do_idle(); + + ret = call_firmware_op(do_idle, FW_DO_IDLE_AFTR); + if (ret == -ENOSYS) { + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) + exynos_cpu_save_register(); + exynos_cpu_set_boot_vector(S5P_CHECK_AFTR); + cpu_do_idle(); + } return 1; } @@ -250,14 +258,13 @@ void exynos_enter_aftr(void) cpu_pm_enter(); exynos_pm_central_suspend(); - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) - exynos_cpu_save_register(); cpu_suspend(0, exynos_aftr_finisher); if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { scu_enable(S5P_VA_SCU); - exynos_cpu_restore_register(); + if (call_firmware_op(resume) == -ENOSYS) + exynos_cpu_restore_register(); } exynos_pm_central_resume(); -- cgit v1.2.3 From c2dd114d24865662a6d7381b101741fc898a0059 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 25 Sep 2014 17:59:41 +0900 Subject: ARM: EXYNOS: fix register setup for AFTR mode code Add S5P_CENTRAL_SEQ_OPTION register setup to cpuidle AFTR mode code by moving the relevant code from exynos_pm_suspend() (used only by suspend) to exynos_pm_central_suspend() (used by both suspend and AFTR). Without this setup AFTR mode doesn't show any benefit over WFI one (at least on Exynos4412 SoC). When this setup is applied AFTR mode reduces power consumption by ~12% (as measured on Trats2 board). This change is a preparation for adding secure firmware support to EXYNOS cpuidle driver. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/pm.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 6796fce923e2..16c5c3206f14 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -196,6 +196,10 @@ static void exynos_pm_central_suspend(void) tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); tmp &= ~S5P_CENTRAL_LOWPWR_CFG; pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + + /* Setting SEQ_OPTION register */ + pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0, + S5P_CENTRAL_SEQ_OPTION); } static int exynos_pm_central_resume(void) @@ -321,15 +325,8 @@ static void exynos_pm_prepare(void) static int exynos_pm_suspend(void) { - unsigned long tmp; - exynos_pm_central_suspend(); - /* Setting SEQ_OPTION register */ - - tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); - pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) exynos_cpu_save_register(); -- cgit v1.2.3 From 42d5dc37866610448453859bf2c4be57fce3834c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 25 Sep 2014 17:59:41 +0900 Subject: ARM: EXYNOS: allow driver usage on Exynos4x12 SoCs Register cpuidle platform device on Exynos4x12 SoCs allowing EXYNOS cpuidle driver usage on these SoCs. AFTR mode reduces power consumption on Trats2 board (Exynos4412 SoC with secure firmware enabled) by ~12% when EXYNOS cpuidle driver is enabled (in both cases the default exynos_defconfig config is used and CPU1-3 are offlined). Currently Exynos4412 SoC support is limited to Trats2 board. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/exynos.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 6b283eb3202e..a487e59555da 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -318,7 +318,10 @@ static void __init exynos_dt_machine_init(void) exynos_sysram_init(); if (of_machine_is_compatible("samsung,exynos4210") || - of_machine_is_compatible("samsung,exynos5250")) + of_machine_is_compatible("samsung,exynos4212") || + (of_machine_is_compatible("samsung,exynos4412") && + of_machine_is_compatible("samsung,trats2")) || + of_machine_is_compatible("samsung,exynos5250")) platform_device_register(&exynos_cpuidle); platform_device_register_simple("exynos-cpufreq", -1, NULL, 0); -- cgit v1.2.3 From 0d713cf1a6286aae6a12affab0887dbe2a4fbb83 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 25 Sep 2014 18:02:45 +0900 Subject: ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=y Fix building of exynos_defconfig with CONFIG_PM_SLEEP disabled and CONFIG_ARM_EXYNOS_CPUIDLE enabled by: * adding EXYNOS_CPU_SUSPEND config option * always building sleep.o * building pm.o if EXYNOS_CPU_SUSPEND is enabled * moving suspend specific code from pm.c to suspend.c * enabling pm-common.o build also for EXYNOS_CPU_SUSPEND option [ Please note that there are no changes in the code moved from pm.c to suspend.c except making few functions non-static and cleaning up includes. ] Also while at it update Copyright dates. The build error messages: drivers/built-in.o: In function `exynos_enter_core0_aftr': /home/bzolnier/linux/drivers/cpuidle/cpuidle-exynos.c:36: undefined reference to `cpu_suspend' arch/arm/mach-exynos/built-in.o:(.data+0x74): undefined reference to `exynos_enter_aftr' make: *** [vmlinux] Error 1 This patch has been tested on Exynos4210 based Origen board. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 5 + arch/arm/mach-exynos/Makefile | 5 +- arch/arm/mach-exynos/common.h | 4 + arch/arm/mach-exynos/pm.c | 338 +------------------------------------- arch/arm/mach-exynos/suspend.c | 356 +++++++++++++++++++++++++++++++++++++++++ arch/arm/plat-samsung/Makefile | 1 + 6 files changed, 374 insertions(+), 335 deletions(-) create mode 100644 arch/arm/mach-exynos/suspend.c (limited to 'arch') diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 2d0240f241b8..46f3c0d0d01f 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -123,4 +123,9 @@ config EXYNOS5420_MCPM This is needed to provide CPU and cluster power management on Exynos5420 implementing big.LITTLE. +config EXYNOS_CPU_SUSPEND + bool + select ARM_CPU_SUSPEND + default PM_SLEEP || ARM_EXYNOS_CPUIDLE + endif diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 45bef21a3b66..3d680f2a5520 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -9,9 +9,10 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree) # Core -obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o +obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o sleep.o -obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o +obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o +obj-$(CONFIG_PM_SLEEP) += suspend.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 2d830df0f647..ef95cb1cc00a 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -164,6 +164,10 @@ extern int exynos_cpu_power_state(int cpu); extern void exynos_cluster_power_down(int cluster); extern void exynos_cluster_power_up(int cluster); extern int exynos_cluster_power_state(int cluster); +extern void exynos_cpu_save_register(void); +extern void exynos_cpu_restore_register(void); +extern void exynos_pm_central_suspend(void); +extern int exynos_pm_central_resume(void); extern void exynos_enter_aftr(void); extern void s5p_init_cpu(void __iomem *cpuid_addr); diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 16c5c3206f14..4f10fa6bfe10 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. + * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. * http://www.samsung.com * * EXYNOS - Power Management support @@ -15,119 +15,20 @@ #include #include -#include #include #include -#include #include -#include -#include #include -#include #include #include #include -#include - -#include #include "common.h" #include "regs-pmu.h" #include "regs-sys.h" -#define REG_TABLE_END (-1U) - -/** - * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping - * @hwirq: Hardware IRQ signal of the GIC - * @mask: Mask in PMU wake-up mask register - */ -struct exynos_wkup_irq { - unsigned int hwirq; - u32 mask; -}; - -static struct sleep_save exynos5_sys_save[] = { - SAVE_ITEM(EXYNOS5_SYS_I2C_CFG), -}; - -static struct sleep_save exynos_core_save[] = { - /* SROM side */ - SAVE_ITEM(S5P_SROM_BW), - SAVE_ITEM(S5P_SROM_BC0), - SAVE_ITEM(S5P_SROM_BC1), - SAVE_ITEM(S5P_SROM_BC2), - SAVE_ITEM(S5P_SROM_BC3), -}; - -struct exynos_pm_data { - const struct exynos_wkup_irq *wkup_irq; - struct sleep_save *extra_save; - int num_extra_save; - unsigned int wake_disable_mask; - unsigned int *release_ret_regs; - - void (*pm_prepare)(void); - void (*pm_resume)(void); - int (*pm_suspend)(void); - int (*cpu_suspend)(unsigned long); -}; - -struct exynos_pm_data *pm_data; - -/* - * GIC wake-up support - */ - -static u32 exynos_irqwake_intmask = 0xffffffff; - -static const struct exynos_wkup_irq exynos4_wkup_irq[] = { - { 76, BIT(1) }, /* RTC alarm */ - { 77, BIT(2) }, /* RTC tick */ - { /* sentinel */ }, -}; - -static const struct exynos_wkup_irq exynos5250_wkup_irq[] = { - { 75, BIT(1) }, /* RTC alarm */ - { 76, BIT(2) }, /* RTC tick */ - { /* sentinel */ }, -}; - -unsigned int exynos_release_ret_regs[] = { - S5P_PAD_RET_MAUDIO_OPTION, - S5P_PAD_RET_GPIO_OPTION, - S5P_PAD_RET_UART_OPTION, - S5P_PAD_RET_MMCA_OPTION, - S5P_PAD_RET_MMCB_OPTION, - S5P_PAD_RET_EBIA_OPTION, - S5P_PAD_RET_EBIB_OPTION, - REG_TABLE_END, -}; - -static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) -{ - const struct exynos_wkup_irq *wkup_irq; - - if (!pm_data->wkup_irq) - return -ENOENT; - wkup_irq = pm_data->wkup_irq; - - while (wkup_irq->mask) { - if (wkup_irq->hwirq == data->hwirq) { - if (!state) - exynos_irqwake_intmask |= wkup_irq->mask; - else - exynos_irqwake_intmask &= ~wkup_irq->mask; - return 0; - } - ++wkup_irq; - } - - return -ENOENT; -} - static inline void __iomem *exynos_boot_vector_addr(void) { if (samsung_rev() == EXYNOS4210_REV_1_1) @@ -147,12 +48,11 @@ static inline void __iomem *exynos_boot_vector_flag(void) } #define S5P_CHECK_AFTR 0xFCBA0D10 -#define S5P_CHECK_SLEEP 0x00000BAD /* For Cortex-A9 Diagnostic and Power control register */ static unsigned int save_arm_register[2]; -static void exynos_cpu_save_register(void) +void exynos_cpu_save_register(void) { unsigned long tmp; @@ -169,7 +69,7 @@ static void exynos_cpu_save_register(void) save_arm_register[1] = tmp; } -static void exynos_cpu_restore_register(void) +void exynos_cpu_restore_register(void) { unsigned long tmp; @@ -188,7 +88,7 @@ static void exynos_cpu_restore_register(void) : "cc"); } -static void exynos_pm_central_suspend(void) +void exynos_pm_central_suspend(void) { unsigned long tmp; @@ -202,7 +102,7 @@ static void exynos_pm_central_suspend(void) S5P_CENTRAL_SEQ_OPTION); } -static int exynos_pm_central_resume(void) +int exynos_pm_central_resume(void) { unsigned long tmp; @@ -275,231 +175,3 @@ void exynos_enter_aftr(void) cpu_pm_exit(); } - -static int exynos_cpu_do_idle(void) -{ - /* issue the standby signal into the pm unit. */ - cpu_do_idle(); - - pr_info("Failed to suspend the system\n"); - return 1; /* Aborting suspend */ -} - -static int exynos_cpu_suspend(unsigned long arg) -{ - flush_cache_all(); - outer_flush_all(); - return exynos_cpu_do_idle(); -} - -static void exynos_pm_set_wakeup_mask(void) -{ - /* Set wake-up mask registers */ - pmu_raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK); - pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); -} - -static void exynos_pm_enter_sleep_mode(void) -{ - /* Set value of power down register for sleep mode */ - exynos_sys_powerdown_conf(SYS_SLEEP); - pmu_raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1); - - /* ensure at least INFORM0 has the resume address */ - pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); -} - -static void exynos_pm_prepare(void) -{ - /* Set wake-up mask registers */ - exynos_pm_set_wakeup_mask(); - - s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - - if (pm_data->extra_save) - s3c_pm_do_save(pm_data->extra_save, - pm_data->num_extra_save); - - exynos_pm_enter_sleep_mode(); -} - -static int exynos_pm_suspend(void) -{ - exynos_pm_central_suspend(); - - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) - exynos_cpu_save_register(); - - return 0; -} - -static void exynos_pm_release_retention(void) -{ - unsigned int i; - - for (i = 0; (pm_data->release_ret_regs[i] != REG_TABLE_END); i++) - pmu_raw_writel(EXYNOS_WAKEUP_FROM_LOWPWR, - pm_data->release_ret_regs[i]); -} - -static void exynos_pm_resume(void) -{ - u32 cpuid = read_cpuid_part(); - - if (exynos_pm_central_resume()) - goto early_wakeup; - - /* For release retention */ - exynos_pm_release_retention(); - - if (pm_data->extra_save) - s3c_pm_do_restore_core(pm_data->extra_save, - pm_data->num_extra_save); - - s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - - if (cpuid == ARM_CPU_PART_CORTEX_A9) - scu_enable(S5P_VA_SCU); - - if (call_firmware_op(resume) == -ENOSYS - && cpuid == ARM_CPU_PART_CORTEX_A9) - exynos_cpu_restore_register(); - -early_wakeup: - - /* Clear SLEEP mode set in INFORM1 */ - pmu_raw_writel(0x0, S5P_INFORM1); -} - -/* - * Suspend Ops - */ - -static int exynos_suspend_enter(suspend_state_t state) -{ - int ret; - - s3c_pm_debug_init(); - - S3C_PMDBG("%s: suspending the system...\n", __func__); - - S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__, - exynos_irqwake_intmask, exynos_get_eint_wake_mask()); - - if (exynos_irqwake_intmask == -1U - && exynos_get_eint_wake_mask() == -1U) { - pr_err("%s: No wake-up sources!\n", __func__); - pr_err("%s: Aborting sleep\n", __func__); - return -EINVAL; - } - - s3c_pm_save_uarts(); - if (pm_data->pm_prepare) - pm_data->pm_prepare(); - flush_cache_all(); - s3c_pm_check_store(); - - ret = call_firmware_op(suspend); - if (ret == -ENOSYS) - ret = cpu_suspend(0, pm_data->cpu_suspend); - if (ret) - return ret; - - s3c_pm_restore_uarts(); - - S3C_PMDBG("%s: wakeup stat: %08x\n", __func__, - pmu_raw_readl(S5P_WAKEUP_STAT)); - - s3c_pm_check_restore(); - - S3C_PMDBG("%s: resuming the system...\n", __func__); - - return 0; -} - -static int exynos_suspend_prepare(void) -{ - s3c_pm_check_prepare(); - - return 0; -} - -static void exynos_suspend_finish(void) -{ - s3c_pm_check_cleanup(); -} - -static const struct platform_suspend_ops exynos_suspend_ops = { - .enter = exynos_suspend_enter, - .prepare = exynos_suspend_prepare, - .finish = exynos_suspend_finish, - .valid = suspend_valid_only_mem, -}; - -static const struct exynos_pm_data exynos4_pm_data = { - .wkup_irq = exynos4_wkup_irq, - .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), - .release_ret_regs = exynos_release_ret_regs, - .pm_suspend = exynos_pm_suspend, - .pm_resume = exynos_pm_resume, - .pm_prepare = exynos_pm_prepare, - .cpu_suspend = exynos_cpu_suspend, -}; - -static const struct exynos_pm_data exynos5250_pm_data = { - .wkup_irq = exynos5250_wkup_irq, - .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), - .release_ret_regs = exynos_release_ret_regs, - .extra_save = exynos5_sys_save, - .num_extra_save = ARRAY_SIZE(exynos5_sys_save), - .pm_suspend = exynos_pm_suspend, - .pm_resume = exynos_pm_resume, - .pm_prepare = exynos_pm_prepare, - .cpu_suspend = exynos_cpu_suspend, -}; - -static struct of_device_id exynos_pmu_of_device_ids[] = { - { - .compatible = "samsung,exynos4210-pmu", - .data = &exynos4_pm_data, - }, { - .compatible = "samsung,exynos4212-pmu", - .data = &exynos4_pm_data, - }, { - .compatible = "samsung,exynos4412-pmu", - .data = &exynos4_pm_data, - }, { - .compatible = "samsung,exynos5250-pmu", - .data = &exynos5250_pm_data, - }, - { /*sentinel*/ }, -}; - -static struct syscore_ops exynos_pm_syscore_ops; - -void __init exynos_pm_init(void) -{ - const struct of_device_id *match; - u32 tmp; - - of_find_matching_node_and_match(NULL, exynos_pmu_of_device_ids, &match); - if (!match) { - pr_err("Failed to find PMU node\n"); - return; - } - pm_data = (struct exynos_pm_data *) match->data; - - /* Platform-specific GIC callback */ - gic_arch_extn.irq_set_wake = exynos_irq_set_wake; - - /* All wakeup disable */ - tmp = pmu_raw_readl(S5P_WAKEUP_MASK); - tmp |= pm_data->wake_disable_mask; - pmu_raw_writel(tmp, S5P_WAKEUP_MASK); - - exynos_pm_syscore_ops.suspend = pm_data->pm_suspend; - exynos_pm_syscore_ops.resume = pm_data->pm_resume; - - register_syscore_ops(&exynos_pm_syscore_ops); - suspend_set_ops(&exynos_suspend_ops); -} diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c new file mode 100644 index 000000000000..f5d9773066eb --- /dev/null +++ b/arch/arm/mach-exynos/suspend.c @@ -0,0 +1,356 @@ +/* + * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS - Suspend support + * + * Based on arch/arm/mach-s3c2410/pm.c + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +#include "common.h" +#include "regs-pmu.h" +#include "regs-sys.h" + +#define S5P_CHECK_SLEEP 0x00000BAD + +#define REG_TABLE_END (-1U) + +/** + * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping + * @hwirq: Hardware IRQ signal of the GIC + * @mask: Mask in PMU wake-up mask register + */ +struct exynos_wkup_irq { + unsigned int hwirq; + u32 mask; +}; + +static struct sleep_save exynos5_sys_save[] = { + SAVE_ITEM(EXYNOS5_SYS_I2C_CFG), +}; + +static struct sleep_save exynos_core_save[] = { + /* SROM side */ + SAVE_ITEM(S5P_SROM_BW), + SAVE_ITEM(S5P_SROM_BC0), + SAVE_ITEM(S5P_SROM_BC1), + SAVE_ITEM(S5P_SROM_BC2), + SAVE_ITEM(S5P_SROM_BC3), +}; + +struct exynos_pm_data { + const struct exynos_wkup_irq *wkup_irq; + struct sleep_save *extra_save; + int num_extra_save; + unsigned int wake_disable_mask; + unsigned int *release_ret_regs; + + void (*pm_prepare)(void); + void (*pm_resume)(void); + int (*pm_suspend)(void); + int (*cpu_suspend)(unsigned long); +}; + +struct exynos_pm_data *pm_data; + +/* + * GIC wake-up support + */ + +static u32 exynos_irqwake_intmask = 0xffffffff; + +static const struct exynos_wkup_irq exynos4_wkup_irq[] = { + { 76, BIT(1) }, /* RTC alarm */ + { 77, BIT(2) }, /* RTC tick */ + { /* sentinel */ }, +}; + +static const struct exynos_wkup_irq exynos5250_wkup_irq[] = { + { 75, BIT(1) }, /* RTC alarm */ + { 76, BIT(2) }, /* RTC tick */ + { /* sentinel */ }, +}; + +unsigned int exynos_release_ret_regs[] = { + S5P_PAD_RET_MAUDIO_OPTION, + S5P_PAD_RET_GPIO_OPTION, + S5P_PAD_RET_UART_OPTION, + S5P_PAD_RET_MMCA_OPTION, + S5P_PAD_RET_MMCB_OPTION, + S5P_PAD_RET_EBIA_OPTION, + S5P_PAD_RET_EBIB_OPTION, + REG_TABLE_END, +}; + +static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) +{ + const struct exynos_wkup_irq *wkup_irq; + + if (!pm_data->wkup_irq) + return -ENOENT; + wkup_irq = pm_data->wkup_irq; + + while (wkup_irq->mask) { + if (wkup_irq->hwirq == data->hwirq) { + if (!state) + exynos_irqwake_intmask |= wkup_irq->mask; + else + exynos_irqwake_intmask &= ~wkup_irq->mask; + return 0; + } + ++wkup_irq; + } + + return -ENOENT; +} + +static int exynos_cpu_do_idle(void) +{ + /* issue the standby signal into the pm unit. */ + cpu_do_idle(); + + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ +} + +static int exynos_cpu_suspend(unsigned long arg) +{ + flush_cache_all(); + outer_flush_all(); + return exynos_cpu_do_idle(); +} + +static void exynos_pm_set_wakeup_mask(void) +{ + /* Set wake-up mask registers */ + pmu_raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK); + pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); +} + +static void exynos_pm_enter_sleep_mode(void) +{ + /* Set value of power down register for sleep mode */ + exynos_sys_powerdown_conf(SYS_SLEEP); + pmu_raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1); + + /* ensure at least INFORM0 has the resume address */ + pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); +} + +static void exynos_pm_prepare(void) +{ + /* Set wake-up mask registers */ + exynos_pm_set_wakeup_mask(); + + s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save)); + + if (pm_data->extra_save) + s3c_pm_do_save(pm_data->extra_save, + pm_data->num_extra_save); + + exynos_pm_enter_sleep_mode(); +} + +static int exynos_pm_suspend(void) +{ + exynos_pm_central_suspend(); + + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) + exynos_cpu_save_register(); + + return 0; +} + +static void exynos_pm_release_retention(void) +{ + unsigned int i; + + for (i = 0; (pm_data->release_ret_regs[i] != REG_TABLE_END); i++) + pmu_raw_writel(EXYNOS_WAKEUP_FROM_LOWPWR, + pm_data->release_ret_regs[i]); +} + +static void exynos_pm_resume(void) +{ + u32 cpuid = read_cpuid_part(); + + if (exynos_pm_central_resume()) + goto early_wakeup; + + /* For release retention */ + exynos_pm_release_retention(); + + if (pm_data->extra_save) + s3c_pm_do_restore_core(pm_data->extra_save, + pm_data->num_extra_save); + + s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); + + if (cpuid == ARM_CPU_PART_CORTEX_A9) + scu_enable(S5P_VA_SCU); + + if (call_firmware_op(resume) == -ENOSYS + && cpuid == ARM_CPU_PART_CORTEX_A9) + exynos_cpu_restore_register(); + +early_wakeup: + + /* Clear SLEEP mode set in INFORM1 */ + pmu_raw_writel(0x0, S5P_INFORM1); +} + +/* + * Suspend Ops + */ + +static int exynos_suspend_enter(suspend_state_t state) +{ + int ret; + + s3c_pm_debug_init(); + + S3C_PMDBG("%s: suspending the system...\n", __func__); + + S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__, + exynos_irqwake_intmask, exynos_get_eint_wake_mask()); + + if (exynos_irqwake_intmask == -1U + && exynos_get_eint_wake_mask() == -1U) { + pr_err("%s: No wake-up sources!\n", __func__); + pr_err("%s: Aborting sleep\n", __func__); + return -EINVAL; + } + + s3c_pm_save_uarts(); + if (pm_data->pm_prepare) + pm_data->pm_prepare(); + flush_cache_all(); + s3c_pm_check_store(); + + ret = call_firmware_op(suspend); + if (ret == -ENOSYS) + ret = cpu_suspend(0, pm_data->cpu_suspend); + if (ret) + return ret; + + s3c_pm_restore_uarts(); + + S3C_PMDBG("%s: wakeup stat: %08x\n", __func__, + pmu_raw_readl(S5P_WAKEUP_STAT)); + + s3c_pm_check_restore(); + + S3C_PMDBG("%s: resuming the system...\n", __func__); + + return 0; +} + +static int exynos_suspend_prepare(void) +{ + s3c_pm_check_prepare(); + + return 0; +} + +static void exynos_suspend_finish(void) +{ + s3c_pm_check_cleanup(); +} + +static const struct platform_suspend_ops exynos_suspend_ops = { + .enter = exynos_suspend_enter, + .prepare = exynos_suspend_prepare, + .finish = exynos_suspend_finish, + .valid = suspend_valid_only_mem, +}; + +static const struct exynos_pm_data exynos4_pm_data = { + .wkup_irq = exynos4_wkup_irq, + .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), + .release_ret_regs = exynos_release_ret_regs, + .pm_suspend = exynos_pm_suspend, + .pm_resume = exynos_pm_resume, + .pm_prepare = exynos_pm_prepare, + .cpu_suspend = exynos_cpu_suspend, +}; + +static const struct exynos_pm_data exynos5250_pm_data = { + .wkup_irq = exynos5250_wkup_irq, + .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), + .release_ret_regs = exynos_release_ret_regs, + .extra_save = exynos5_sys_save, + .num_extra_save = ARRAY_SIZE(exynos5_sys_save), + .pm_suspend = exynos_pm_suspend, + .pm_resume = exynos_pm_resume, + .pm_prepare = exynos_pm_prepare, + .cpu_suspend = exynos_cpu_suspend, +}; + +static struct of_device_id exynos_pmu_of_device_ids[] = { + { + .compatible = "samsung,exynos4210-pmu", + .data = &exynos4_pm_data, + }, { + .compatible = "samsung,exynos4212-pmu", + .data = &exynos4_pm_data, + }, { + .compatible = "samsung,exynos4412-pmu", + .data = &exynos4_pm_data, + }, { + .compatible = "samsung,exynos5250-pmu", + .data = &exynos5250_pm_data, + }, + { /*sentinel*/ }, +}; + +static struct syscore_ops exynos_pm_syscore_ops; + +void __init exynos_pm_init(void) +{ + const struct of_device_id *match; + u32 tmp; + + of_find_matching_node_and_match(NULL, exynos_pmu_of_device_ids, &match); + if (!match) { + pr_err("Failed to find PMU node\n"); + return; + } + pm_data = (struct exynos_pm_data *) match->data; + + /* Platform-specific GIC callback */ + gic_arch_extn.irq_set_wake = exynos_irq_set_wake; + + /* All wakeup disable */ + tmp = pmu_raw_readl(S5P_WAKEUP_MASK); + tmp |= pm_data->wake_disable_mask; + pmu_raw_writel(tmp, S5P_WAKEUP_MASK); + + exynos_pm_syscore_ops.suspend = pm_data->pm_suspend; + exynos_pm_syscore_ops.resume = pm_data->pm_resume; + + register_syscore_ops(&exynos_pm_syscore_ops); + suspend_set_ops(&exynos_suspend_ops); +} diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index f0a008496993..87746c37f030 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o # PM support obj-$(CONFIG_PM_SLEEP) += pm-common.o +obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm-common.o obj-$(CONFIG_SAMSUNG_PM) += pm.o obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o -- cgit v1.2.3 From b588aaec6d0d846c88bfa2ba95e76147386a4cd6 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 25 Sep 2014 18:15:13 +0900 Subject: ARM: EXYNOS: SWRESET is needed to boot secondary CPU on exynos3250 Without software reset the secondary CPU does not power up and exynos_boot_secondary() ends with pen_release equal to 1. This can be observed in dmesg: CPU1: failed to come online Brought up 1 CPUs SMP: Total of 1 processors activated. CPU: All CPU(s) started in SVC mode. When booting the secondary CPU on Exynos3250 execute also software reset for core 1. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/platsmp.c | 23 +++++++++++++++++++++++ arch/arm/mach-exynos/regs-pmu.h | 2 ++ 2 files changed, 25 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 41ae28d69e6f..8543064dc445 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -120,6 +120,26 @@ static inline void __iomem *cpu_boot_reg(int cpu) return boot_reg; } +/* + * Set wake up by local power mode and execute software reset for given core. + * + * Currently this is needed only when booting secondary CPU on Exynos3250. + */ +static void exynos_core_restart(u32 core_id) +{ + u32 val; + + if (!of_machine_is_compatible("samsung,exynos3250")) + return; + + val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id)); + val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG; + pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id)); + + pr_info("CPU%u: Software reset\n", core_id); + pmu_raw_writel(EXYNOS_CORE_PO_RESET(core_id), EXYNOS_SWRESET); +} + /* * Write pen_release in a way that is guaranteed to be visible to all * observers, irrespective of whether they're taking part in coherency @@ -196,6 +216,9 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) return -ETIMEDOUT; } } + + exynos_core_restart(core_id); + /* * Send the secondary CPU a soft interrupt, thereby causing * the boot monitor to read the system wide flags register, diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index 30c03017aa6a..4ea5e320c6d1 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -21,6 +21,7 @@ #define S5P_USE_STANDBY_WFI0 (1 << 16) #define S5P_USE_STANDBY_WFE0 (1 << 24) +#define EXYNOS_CORE_PO_RESET(n) ((1 << 4) << n) #define EXYNOS_WAKEUP_FROM_LOWPWR (1 << 28) #define EXYNOS_SWRESET 0x0400 #define EXYNOS5440_SWRESET 0x00C4 @@ -125,6 +126,7 @@ #define S5P_PAD_RET_EBIB_OPTION 0x31A8 #define S5P_CORE_LOCAL_PWR_EN 0x3 +#define S5P_CORE_WAKEUP_FROM_LOCAL_CFG (0x3 << 8) /* Only for EXYNOS4210 */ #define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154 -- cgit v1.2.3 From 19fd45bf5f642e409081130e568e134fa11281b7 Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Tue, 23 Sep 2014 07:20:52 +0900 Subject: ARM: dts: Prepare node labels for exynos5250 Allows them to be extended by reference. Reviewed-by: Doug Anderson Signed-off-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index f21b9aa00fbb..012b0211afed 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -218,7 +218,7 @@ clock-names = "fimg2d"; }; - codec@11000000 { + mfc: codec@11000000 { compatible = "samsung,mfc-v6"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; @@ -227,7 +227,7 @@ clock-names = "mfc"; }; - rtc@101E0000 { + rtc: rtc@101E0000 { clocks = <&clock CLK_RTC>; clock-names = "rtc"; status = "disabled"; @@ -261,7 +261,7 @@ clock-names = "uart", "clk_uart_baud0"; }; - sata@122F0000 { + sata: sata@122F0000 { compatible = "snps,dwc-ahci"; samsung,sata-freq = <66>; reg = <0x122F0000 0x1ff>; @@ -573,7 +573,7 @@ #phy-cells = <1>; }; - usb@12110000 { + ehci: usb@12110000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; interrupts = <0 71 0>; @@ -588,7 +588,7 @@ }; }; - usb@12120000 { + ohci: usb@12120000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12120000 0x100>; interrupts = <0 71 0>; @@ -710,7 +710,7 @@ clock-names = "gscl"; }; - hdmi { + hdmi: hdmi { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; @@ -736,14 +736,14 @@ #phy-cells = <0>; }; - dp-controller@145B0000 { + dp: dp-controller@145B0000 { clocks = <&clock CLK_DP>; clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; }; - fimd@14400000 { + fimd: fimd@14400000 { clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; -- cgit v1.2.3 From ca5423e8b2627919075c61570d283590e172f6f0 Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Tue, 23 Sep 2014 07:49:39 +0900 Subject: ARM: dts: Clean up exynos5250-snow Use the new style of referencing inherited nodes and use symbolic names. Reorder one pinctrl node in GPIO order. Goal is the alignment of all exynos5250 based device trees for comparison. Suggested-by: Doug Anderson Reviewed-by: Doug Anderson Signed-off-by: Andreas Faerber Reviewed-by: Tomasz Figa [kgene.kim@samsung.com: rebased and squashed] Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-snow.dts | 259 +++++++++++++++++----------------- 1 file changed, 129 insertions(+), 130 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index e51fcef884a4..2ad52f7a177d 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -6,10 +6,12 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include +#include +#include #include "exynos5250.dtsi" / { @@ -27,89 +29,19 @@ chosen { }; - rtc@101E0000 { - status = "okay"; - }; - - pinctrl@11400000 { - ec_irq: ec-irq { - samsung,pins = "gpx1-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - sd3_clk: sd3-clk { - samsung,pin-drv = <0>; - }; - - sd3_cmd: sd3-cmd { - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - sd3_bus4: sd3-bus-width4 { - samsung,pin-drv = <0>; - }; - - max98095_en: max98095-en { - samsung,pins = "gpx1-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - tps65090_irq: tps65090-irq { - samsung,pins = "gpx2-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - usb3_vbus_en: usb3-vbus-en { - samsung,pins = "gpx2-7"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; - }; - }; - - pinctrl@13400000 { - arb_their_claim: arb-their-claim { - samsung,pins = "gpe0-4"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - arb_our_claim: arb-our-claim { - samsung,pins = "gpf0-3"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - }; - gpio-keys { compatible = "gpio-keys"; power { label = "Power"; - gpios = <&gpx1 3 1>; - linux,code = <116>; /* KEY_POWER */ + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; + linux,code = ; gpio-key,wakeup; }; lid-switch { label = "Lid"; - gpios = <&gpx3 5 1>; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; @@ -130,8 +62,8 @@ i2c-parent = <&{/i2c@12CA0000}>; - our-claim-gpio = <&gpf0 3 1>; - their-claim-gpios = <&gpe0 4 1>; + our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; + their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; slew-delay-us = <10>; wait-retry-us = <3000>; wait-free-us = <50000>; @@ -154,7 +86,7 @@ cros_ec: embedded-controller { compatible = "google,cros-ec-i2c"; reg = <0x1e>; - interrupts = <6 0>; + interrupts = <6 IRQ_TYPE_NONE>; interrupt-parent = <&gpx1>; pinctrl-names = "default"; pinctrl-0 = <&ec_irq>; @@ -241,13 +173,6 @@ }; i2c@12CD0000 { - max98095: codec@11 { - compatible = "maxim,max98095"; - reg = <0x11>; - pinctrl-0 = <&max98095_en>; - pinctrl-names = "default"; - }; - ptn3460: lvds-bridge@20 { compatible = "nxp,ptn3460"; reg = <0x20>; @@ -258,10 +183,6 @@ }; }; - i2s0: i2s@03830000 { - status = "okay"; - }; - sound { compatible = "google,snow-audio-max98095"; @@ -275,20 +196,12 @@ regulator-name = "P5.0V_USB3CON"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpx2 7 0>; + gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb3_vbus_en>; enable-active-high; }; - phy@12100000 { - vbus-supply = <&usb3_vbus_reg>; - }; - - usb@12110000 { - samsung,vbus-gpio = <&gpx1 1 0>; - }; - fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -296,18 +209,6 @@ }; }; - hdmi { - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; - ddc = <&i2c_2>; - hdmi-en-supply = <&tps65090_fet7>; - vdd-supply = <&ldo8_reg>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; - }; - backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; @@ -319,30 +220,45 @@ pinctrl-names = "default"; }; - fimd@14400000 { - status = "okay"; - samsung,invert-vclk; - }; - panel: panel { compatible = "auo,b116xw03"; power-supply = <&fet6>; backlight = <&backlight>; }; - dp-controller@145B0000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx0 7 0>; - bridge = <&ptn3460>; - }; +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; + bridge = <&ptn3460>; +}; + +&ehci { + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; }; &i2c_0 { @@ -353,7 +269,7 @@ max77686@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; wakeup-source; @@ -503,7 +419,7 @@ trackpad { reg = <0x67>; compatible = "cypress,cyapa"; - interrupts = <2 0>; + interrupts = <2 IRQ_TYPE_NONE>; interrupt-parent = <&gpx1>; wakeup-source; }; @@ -550,6 +466,13 @@ status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + + max98095: codec@11 { + compatible = "maxim,max98095"; + reg = <0x11>; + pinctrl-0 = <&max98095_en>; + pinctrl-names = "default"; + }; }; &i2c_8 { @@ -563,6 +486,10 @@ }; }; +&i2s0 { + status = "okay"; +}; + &mmc_0 { status = "okay"; num-slots = <1>; @@ -587,7 +514,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; bus-width = <4>; - wp-gpios = <&gpc2 1 0>; + wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>; cap-sd-highspeed; }; @@ -610,12 +537,80 @@ }; &pinctrl_0 { + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + max98095_en: max98095-en { + samsung,pins = "gpx1-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb3_vbus_en: usb3-vbus-en { + samsung,pins = "gpx2-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + max77686_irq: max77686-irq { samsung,pins = "gpx3-2"; samsung,pin-function = <0>; samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + arb_their_claim: arb-their-claim { + samsung,pins = "gpe0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + arb_our_claim: arb-our-claim { + samsung,pins = "gpf0-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&sd3_bus4 { + samsung,pin-drv = <0>; +}; + +&sd3_clk { + samsung,pin-drv = <0>; +}; + +&sd3_cmd { + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; }; &spi_1 { @@ -624,4 +619,8 @@ num-cs = <1>; }; +&usbdrd_phy { + vbus-supply = <&usb3_vbus_reg>; +}; + #include "cros-ec-keyboard.dtsi" -- cgit v1.2.3 From 5140e29d67cd4be66f25506a7d2a77c0ee79c1b2 Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Tue, 23 Sep 2014 08:03:57 +0900 Subject: ARM: dts: Fill in bootargs for exynos5250-snow exynos5250-cros-common.dtsi had an empty /chosen node. Fill in exemplary boot arguments. Reviewed-by: Tomasz Figa Signed-off-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-snow.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 2ad52f7a177d..3c6c97e52526 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -27,6 +27,7 @@ }; chosen { + bootargs = "console=tty1"; }; gpio-keys { -- cgit v1.2.3 From adca3e614ed6cca2028161183c124d730733ccaf Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Tue, 23 Sep 2014 23:53:20 +0900 Subject: ARM: dts: Clean up exynos5250-smdk5250 Use the new style for referencing inherited nodes and use symbolic names. Goal is the alignment of all exynos5250 based device trees for comparison. Signed-off-by: Andreas Faerber Reviewed-by: Tomasz Figa [kgene.kim@samsung.com: rebased and squashed] Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 618 +++++++++++++++--------------- arch/arm/boot/dts/exynos5250-snow.dts | 1 + 2 files changed, 312 insertions(+), 307 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 6a0f4c0ff763..bc27cc2558fe 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -7,9 +7,11 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ /dts-v1/; +#include +#include #include "exynos5250.dtsi" / { @@ -27,165 +29,6 @@ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; - rtc@101E0000 { - status = "okay"; - }; - - i2c@12C60000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - status = "okay"; - - eeprom@50 { - compatible = "samsung,s524ad0xd1"; - reg = <0x50>; - }; - - max77686@09 { - compatible = "maxim,max77686"; - reg = <0x09>; - interrupt-parent = <&gpx3>; - interrupts = <2 0>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "P1.0V_LDO_OUT1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "P1.2V_LDO_OUT2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "P1.8V_LDO_OUT3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "P2.8V_LDO_OUT4"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "P1.8V_LDO_OUT5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo6_reg: LDO6 { - regulator-name = "P1.1V_LDO_OUT6"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "P1.1V_LDO_OUT7"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "P1.0V_LDO_OUT8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo10_reg: LDO10 { - regulator-name = "P1.8V_LDO_OUT10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo11_reg: LDO11 { - regulator-name = "P1.8V_LDO_OUT11"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo12_reg: LDO12 { - regulator-name = "P3.0V_LDO_OUT12"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo13_reg: LDO13 { - regulator-name = "P1.8V_LDO_OUT13"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo14_reg: LDO14 { - regulator-name = "P1.8V_LDO_OUT14"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "P1.0V_LDO_OUT15"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo16_reg: LDO16 { - regulator-name = "P1.8V_LDO_OUT16"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "P1.8V_BUCK_OUT5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; - }; - vdd: fixed-regulator@0 { compatible = "regulator-fixed"; regulator-name = "vdd-supply"; @@ -210,199 +53,360 @@ regulator-always-on; }; - i2c@12C70000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - status = "okay"; + sound { + compatible = "samsung,smdk-wm8994"; - eeprom@51 { - compatible = "samsung,s524ad0xd1"; - reg = <0x51>; + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&wm8994>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; }; - wm8994: wm8994@1a { - compatible = "wlf,wm8994"; - reg = <0x1a>; + codec_mclk: codec-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16934000>; + }; + }; +}; - gpio-controller; - #gpio-cells = <2>; +&dp { + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + status = "okay"; +}; - clocks = <&codec_mclk>; - clock-names = "MCLK1"; +&ehci { + samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; +}; - AVDD2-supply = <&vdd>; - CPVDD-supply = <&vdd>; - DBVDD-supply = <&dbvdd>; - SPKVDD1-supply = <&spkvdd>; - SPKVDD2-supply = <&spkvdd>; +&fimd { + status = "okay"; + + display-timings { + native-mode = <&timing0>; + + timing0: timing@0 { + /* 1280x800 */ + clock-frequency = <50000>; + hactive = <1280>; + vactive = <800>; + hfront-porch = <4>; + hback-porch = <4>; + hsync-len = <4>; + vback-porch = <4>; + vfront-porch = <4>; + vsync-len = <4>; }; }; +}; - i2c@121D0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <40000>; - samsung,i2c-slave-addr = <0x38>; - status = "okay"; +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; +}; - sata_phy_i2c:sata-phy@38 { - compatible = "samsung,exynos-sataphy-i2c"; - reg = <0x38>; - }; +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + + eeprom@50 { + compatible = "samsung,s524ad0xd1"; + reg = <0x50>; }; - i2c@12C80000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - status = "okay"; + max77686@09 { + compatible = "maxim,max77686"; + reg = <0x09>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_NONE>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; - }; + ldo2_reg: LDO2 { + regulator-name = "P1.2V_LDO_OUT2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; - i2c@12CE0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - status = "okay"; + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; - }; + ldo4_reg: LDO4 { + regulator-name = "P2.8V_LDO_OUT4"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; - sata@122F0000 { - status = "okay"; - }; + ldo5_reg: LDO5 { + regulator-name = "P1.8V_LDO_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - sata-phy@12170000 { - status = "okay"; - samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; - }; + ldo6_reg: LDO6 { + regulator-name = "P1.1V_LDO_OUT6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; - mmc@12200000 { - status = "okay"; - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - cap-mmc-highspeed; - }; + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; - mmc@12220000 { - status = "okay"; - num-slots = <1>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - }; + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - spi_1: spi@12d30000 { - cs-gpios = <&gpa2 5 0>; - status = "okay"; + ldo11_reg: LDO11 { + regulator-name = "P1.8V_LDO_OUT11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - w25q80bw@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "w25x80"; - reg = <0>; - spi-max-frequency = <1000000>; + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; - controller-data { - samsung,spi-feedback-delay = <0>; + ldo13_reg: LDO13 { + regulator-name = "P1.8V_LDO_OUT13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; - partition@40000 { - label = "Kernel"; - reg = <0x40000 0xc0000>; + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; }; }; }; +}; - hdmi { - hpd-gpio = <&gpx3 7 0>; - }; +&i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; - codec@11000000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + eeprom@51 { + compatible = "samsung,s524ad0xd1"; + reg = <0x51>; }; - i2s0: i2s@03830000 { - status = "okay"; + wm8994: wm8994@1a { + compatible = "wlf,wm8994"; + reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + + clocks = <&codec_mclk>; + clock-names = "MCLK1"; + + AVDD2-supply = <&vdd>; + CPVDD-supply = <&vdd>; + DBVDD-supply = <&dbvdd>; + SPKVDD1-supply = <&spkvdd>; + SPKVDD2-supply = <&spkvdd>; }; +}; - sound { - compatible = "samsung,smdk-wm8994"; +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; - samsung,i2s-controller = <&i2s0>; - samsung,audio-codec = <&wm8994>; + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; }; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; - usb@12110000 { - samsung,vbus-gpio = <&gpx2 6 0>; + hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; }; +}; + +&i2c_9 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + samsung,i2c-slave-addr = <0x38>; - dp-controller@145B0000 { - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - status = "okay"; + sata_phy_i2c: sata-phy@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; }; +}; - fimd@14400000 { - status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing@0 { - /* 1280x800 */ - clock-frequency = <50000>; - hactive = <1280>; - vactive = <800>; - hfront-porch = <4>; - hback-porch = <4>; - hsync-len = <4>; - vback-porch = <4>; - vfront-porch = <4>; - vsync-len = <4>; - }; +&i2s0 { + status = "okay"; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; + samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; +}; + +&spi_1 { + status = "okay"; + cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; + + w25q80bw@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + samsung,spi-feedback-delay = <0>; }; - }; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <24000000>; + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; }; - codec_mclk: codec-mclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <16934000>; + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 3c6c97e52526..7f24b00255e6 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -226,6 +226,7 @@ power-supply = <&fet6>; backlight = <&backlight>; }; +}; &dp { status = "okay"; -- cgit v1.2.3 From c71335e7e876d2c26e60caf667021fa19fb14e1d Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Wed, 24 Sep 2014 00:00:46 +0900 Subject: ARM: dts: Clean up exynos5250-arndale Use the new style of referencing inherited nodes, use symbolic names, tidy indentation and reorder includes. Goal is the alignment of all exynos5250 based device trees for comparison. Signed-off-by: Andreas Faerber Reviewed-by: Tomasz Figa [kgene.kim@samsung.com: rebased] Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-arndale.dts | 909 ++++++++++++++++--------------- 1 file changed, 456 insertions(+), 453 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 3acd97eb6630..54d8b7ec313b 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -7,12 +7,13 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ /dts-v1/; -#include "exynos5250.dtsi" +#include #include #include +#include "exynos5250.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -26,465 +27,52 @@ bootargs = "console=ttySAC2,115200"; }; - rtc@101E0000 { - status = "okay"; - }; - - codec@11000000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - }; - - i2c@12C60000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - samsung,i2c-slave-addr = <0x66>; - status = "okay"; - - s5m8767_pmic@66 { - compatible = "samsung,s5m8767-pmic"; - reg = <0x66>; - interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - - vinb1-supply = <&main_dc_reg>; - vinb2-supply = <&main_dc_reg>; - vinb3-supply = <&main_dc_reg>; - vinb4-supply = <&main_dc_reg>; - vinb5-supply = <&main_dc_reg>; - vinb6-supply = <&main_dc_reg>; - vinb7-supply = <&main_dc_reg>; - vinb8-supply = <&main_dc_reg>; - vinb9-supply = <&main_dc_reg>; - - vinl1-supply = <&buck7_reg>; - vinl2-supply = <&buck7_reg>; - vinl3-supply = <&buck7_reg>; - vinl4-supply = <&main_dc_reg>; - vinl5-supply = <&main_dc_reg>; - vinl6-supply = <&main_dc_reg>; - vinl7-supply = <&main_dc_reg>; - vinl8-supply = <&buck8_reg>; - vinl9-supply = <&buck8_reg>; - - s5m8767,pmic-buck2-dvs-voltage = <1300000>; - s5m8767,pmic-buck3-dvs-voltage = <1100000>; - s5m8767,pmic-buck4-dvs-voltage = <1200000>; - s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>, - <&gpd1 1 0>, - <&gpd1 2 0>; - s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, - <&gpx2 4 0>, - <&gpx2 5 0>; - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_1.0V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_28IO_DP_1.35V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo3_reg: LDO3 { - regulator-name = "VDD_COMMON1_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDD_IOPERI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; - }; - - ldo5_reg: LDO5 { - regulator-name = "VDD_EXT_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD_MPLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD_XPLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VDD_COMMON2_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo9_reg: LDO9 { - regulator-name = "VDD_33ON_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - op_mode = <1>; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD_COMMON3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD_ABB2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD_USB_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo13_reg: LDO13 { - regulator-name = "VDDQ_C2C_W_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo14_reg: LDO14 { - regulator-name = "VDD18_ABB0_3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo15_reg: LDO15 { - regulator-name = "VDD10_COMMON4_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo16_reg: LDO16 { - regulator-name = "VDD18_HSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo17_reg: LDO17 { - regulator-name = "VDDQ_MMC2_3_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - ldo18_reg: LDO18 { - regulator-name = "VDD_33ON_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - op_mode = <1>; - }; - - ldo22_reg: LDO22 { - regulator-name = "EXT_33_OFF"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - op_mode = <1>; - }; - - ldo23_reg: LDO23 { - regulator-name = "EXT_28_OFF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - op_mode = <1>; - }; - - ldo25_reg: LDO25 { - regulator-name = "PVDD_LDO25"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - op_mode = <1>; - }; - - ldo26_reg: LDO26 { - regulator-name = "EXT_18_OFF"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - op_mode = <1>; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDD_MEM_1.35V"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1355000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; - }; - - buck7_reg: BUCK7 { - regulator-name = "PVDD_BUCK7"; - regulator-always-on; - op_mode = <1>; - }; - - buck8_reg: BUCK8 { - regulator-name = "PVDD_BUCK8"; - regulator-always-on; - op_mode = <1>; - }; - - buck9_reg: BUCK9 { - regulator-name = "VDD_33_OFF_EXT1"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3000000>; - op_mode = <1>; - }; - }; - }; - }; - - i2c@12C80000 { - status = "okay"; - - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x50>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; - }; - - i2c@12C90000 { - status = "okay"; - - wm1811a@1a { - - compatible = "wlf,wm1811"; - reg = <0x1a>; - - AVDD2-supply = <&main_dc_reg>; - CPVDD-supply = <&main_dc_reg>; - DBVDD1-supply = <&main_dc_reg>; - DBVDD2-supply = <&main_dc_reg>; - DBVDD3-supply = <&main_dc_reg>; - LDO1VDD-supply = <&main_dc_reg>; - SPKVDD1-supply = <&main_dc_reg>; - SPKVDD2-supply = <&main_dc_reg>; - - wlf,ldo1ena = <&gpb0 0 0>; - wlf,ldo2ena = <&gpb0 1 0>; - }; - }; - - i2c@12CE0000 { - status = "okay"; - - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x38>; - - hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; - }; - - i2c@121D0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <40000>; - samsung,i2c-slave-addr = <0x38>; - - sata_phy_i2c:sata-phy@38 { - compatible = "samsung,exynos-sataphy-i2c"; - reg = <0x38>; - }; - }; - - sata@122F0000 { - status = "okay"; - }; - - sata-phy@12170000 { - status = "okay"; - samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; - }; - - mmc_0: mmc@12200000 { - status = "okay"; - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - vmmc-supply = <&mmc_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - cap-mmc-highspeed; - }; - - mmc_2: mmc@12220000 { - status = "okay"; - num-slots = <1>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - vmmc-supply = <&mmc_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - }; - - i2s0: i2s@03830000 { - status = "okay"; - }; - gpio_keys { compatible = "gpio-keys"; menu { label = "SW-TACT2"; - gpios = <&gpx1 4 1>; + gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; home { label = "SW-TACT3"; - gpios = <&gpx1 5 1>; + gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; up { label = "SW-TACT4"; - gpios = <&gpx1 6 1>; + gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; down { label = "SW-TACT5"; - gpios = <&gpx1 7 1>; + gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; back { label = "SW-TACT6"; - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; wakeup { label = "SW-TACT7"; - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; }; - hdmi { - hpd-gpio = <&gpx3 7 2>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; - vdd-supply = <&ldo8_reg>; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -502,7 +90,7 @@ regulator-name = "VDD_33ON_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 1>; + gpio = <&gpx1 1 GPIO_ACTIVE_LOW>; enable-active-high; }; @@ -520,35 +108,6 @@ }; }; - dp-controller@145B0000 { - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - status = "okay"; - }; - - fimd: fimd@14400000 { - status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing@0 { - /* 2560x1600 DP panel */ - clock-frequency = <50000>; - hactive = <2560>; - vactive = <1600>; - hfront-porch = <48>; - hback-porch = <80>; - hsync-len = <32>; - vback-porch = <16>; - vfront-porch = <8>; - vsync-len = <6>; - }; - }; - }; - usb_hub_bus { compatible = "simple-bus"; #address-cells = <1>; @@ -558,8 +117,452 @@ usb_hub: usb_hub { compatible = "smsc,usb3503a"; - reset-gpios = <&gpx3 5 1>; - connect-gpios = <&gpd1 7 1>; + reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&dp { + status = "okay"; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; +}; + +&fimd { + status = "okay"; + + display-timings { + native-mode = <&timing0>; + + timing0: timing@0 { + /* 2560x1600 DP panel */ + clock-frequency = <50000>; + hactive = <2560>; + vactive = <1600>; + hfront-porch = <48>; + hback-porch = <80>; + hsync-len = <32>; + vback-porch = <16>; + vfront-porch = <8>; + vsync-len = <6>; + }; + }; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 2>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + vdd-supply = <&ldo8_reg>; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + samsung,i2c-slave-addr = <0x66>; + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + vinb1-supply = <&main_dc_reg>; + vinb2-supply = <&main_dc_reg>; + vinb3-supply = <&main_dc_reg>; + vinb4-supply = <&main_dc_reg>; + vinb5-supply = <&main_dc_reg>; + vinb6-supply = <&main_dc_reg>; + vinb7-supply = <&main_dc_reg>; + vinb8-supply = <&main_dc_reg>; + vinb9-supply = <&main_dc_reg>; + + vinl1-supply = <&buck7_reg>; + vinl2-supply = <&buck7_reg>; + vinl3-supply = <&buck7_reg>; + vinl4-supply = <&main_dc_reg>; + vinl5-supply = <&main_dc_reg>; + vinl6-supply = <&main_dc_reg>; + vinl7-supply = <&main_dc_reg>; + vinl8-supply = <&buck8_reg>; + vinl9-supply = <&buck8_reg>; + + s5m8767,pmic-buck2-dvs-voltage = <1300000>; + s5m8767,pmic-buck3-dvs-voltage = <1100000>; + s5m8767,pmic-buck4-dvs-voltage = <1200000>; + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, + <&gpd1 1 GPIO_ACTIVE_HIGH>, + <&gpd1 2 GPIO_ACTIVE_HIGH>; + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, + <&gpx2 4 GPIO_ACTIVE_HIGH>, + <&gpx2 5 GPIO_ACTIVE_HIGH>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_28IO_DP_1.35V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD_COMMON1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_IOPERI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD_MPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_XPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD_COMMON2_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD_33ON_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_COMMON3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_ABB2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_USB_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_COMMON4_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDQ_MMC2_3_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo18_reg: LDO18 { + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo22_reg: LDO22 { + regulator-name = "EXT_33_OFF"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; + }; + + ldo23_reg: LDO23 { + regulator-name = "EXT_28_OFF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo25_reg: LDO25 { + regulator-name = "PVDD_LDO25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + op_mode = <1>; + }; + + ldo26_reg: LDO26 { + regulator-name = "EXT_18_OFF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_MEM_1.35V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1355000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck7_reg: BUCK7 { + regulator-name = "PVDD_BUCK7"; + regulator-always-on; + op_mode = <1>; + }; + + buck8_reg: BUCK8 { + regulator-name = "PVDD_BUCK8"; + regulator-always-on; + op_mode = <1>; + }; + + buck9_reg: BUCK9 { + regulator-name = "VDD_33_OFF_EXT1"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + }; }; }; }; + +&i2c_2 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + + wm1811a@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + + AVDD2-supply = <&main_dc_reg>; + CPVDD-supply = <&main_dc_reg>; + DBVDD1-supply = <&main_dc_reg>; + DBVDD2-supply = <&main_dc_reg>; + DBVDD3-supply = <&main_dc_reg>; + LDO1VDD-supply = <&main_dc_reg>; + SPKVDD1-supply = <&main_dc_reg>; + SPKVDD2-supply = <&main_dc_reg>; + + wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>; + wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c_8 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x38>; + + hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&i2c_9 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + samsung,i2c-slave-addr = <0x38>; + + sata_phy_i2c:sata-phy@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + vmmc-supply = <&mmc_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + vmmc-supply = <&mmc_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; + samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; +}; -- cgit v1.2.3 From e79bfe1244887ac64b2f9dfa9ffbd5a451a61b0c Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Wed, 24 Sep 2014 00:01:28 +0900 Subject: ARM: dts: Fix apparent GPIO typo in exynos5250-arndale The GPIO flag 2 has no constant assigned, so this was probably active-low. Reviewed-by: Tomasz Figa Signed-off-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-arndale.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 54d8b7ec313b..e01270878dfc 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -155,7 +155,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 2>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; vdd-supply = <&ldo8_reg>; -- cgit v1.2.3 From ceb5b5deaf6ffc2712071d9e89b2acd8eb1651e2 Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Wed, 24 Sep 2014 00:01:50 +0900 Subject: ARM: dts: Simplify USB3503 on exynos5250-arndale There's no need for a simple-bus, place the smsc,usb3503a directly into the root node. That's what we're going to do on exynos5250-spring. Reported-by: Tomasz Figa Reviewed-by: Tomasz Figa Signed-off-by: Andreas Faerber Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-arndale.dts | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index e01270878dfc..7e728a1b5559 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -108,18 +108,12 @@ }; }; - usb_hub_bus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + // SMSC USB3503 connected in hardware only mode as a PHY + usb_hub: usb-hub { + compatible = "smsc,usb3503a"; - // SMSC USB3503 connected in hardware only mode as a PHY - usb_hub: usb_hub { - compatible = "smsc,usb3503a"; - - reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; - connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>; - }; + reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>; }; }; -- cgit v1.2.3 From 53dd4138bb0afe577027f1fa78b0eba9c1a6a392 Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Wed, 24 Sep 2014 00:02:14 +0900 Subject: ARM: dts: Add exynos5250-spring device tree Adds initial support for the HP Chromebook 11. Cc: Vincent Palatin Cc: Doug Anderson Cc: Stephan van Schaik Signed-off-by: Andreas Faerber Reviewed-by: Tomasz Figa Reviewed-by: Doug Anderson Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5250-spring.dts | 536 ++++++++++++++++++++++++++++++++ 2 files changed, 537 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5250-spring.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..4a75e293cd40 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5250-spring.dtb \ exynos5260-xyref5260.dtb \ exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts new file mode 100644 index 000000000000..f5566f84d885 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -0,0 +1,536 @@ +/* + * Google Spring board device tree source + * + * Copyright (c) 2013 Google, Inc + * Copyright (c) 2014 SUSE LINUX Products GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include +#include +#include +#include "exynos5250.dtsi" + +/ { + model = "Google Spring"; + compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=tty1"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq>, <&lid_irq>; + + power { + label = "Power"; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; + linux,code = ; + gpio-key,wakeup; + }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; + + usb-hub { + compatible = "smsc,usb3503a"; + reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <1>; + samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>; +}; + +&ehci { + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; + hdmi-en-supply = <&ldo8_reg>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + s5m8767-pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */ + <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */ + <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */ + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */ + <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */ + <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */ + + /* + * The following arrays of DVS voltages are not used, since we are + * not using GPIOs to control PMIC bucks, but they must be defined + * to please the driver. + */ + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", + "en32khz_cp", + "en32khz_bt"; + }; + + regulators { + ldo4_reg: LDO4 { + regulator-name = "P1.0V_LDO_OUT4"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo5_reg: LDO5 { + regulator-name = "P1.0V_LDO_OUT5"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_mydp"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo11_reg: LDO11 { + regulator-name = "P1.8V_LDO_OUT11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo13_reg: LDO13 { + regulator-name = "P1.8V_LDO_OUT13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo17_reg: LDO17 { + regulator-name = "P2.8V_LDO_OUT17"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo25_reg: LDO25 { + regulator-name = "vdd_bridge"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + op_mode = <3>; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.2V_BUCK_OUT6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <0>; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_ummc"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + }; + }; +}; + +&i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; +}; + +/* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ +&i2c2_bus { + samsung,pin-pud = <0>; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_4 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + cros_ec: embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx1>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; + }; +}; + +&i2c_5 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_7 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +/* + * On Spring we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ +&mmc_1 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&pinctrl_0 { + s5m8767_dvs: s5m8767-dvs { + samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp-hpd-gpio { + samsung,pins = "gpc3-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + s5m8767_ds: s5m8767-ds { + samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + s5m8767_irq: s5m8767-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lid_irq: lid-irq { + samsung,pins = "gpx3-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + hsic_reset: hsic-reset { + samsung,pins = "gpe1-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&sd1_bus4 { + samsung,pin-drv = <0>; +}; + +&sd1_cd { + samsung,pin-drv = <0>; +}; + +&sd1_clk { + samsung,pin-drv = <0>; +}; + +&sd1_cmd { + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; +}; + +&spi_1 { + status = "okay"; + samsung,spi-src-clk = <0>; + num-cs = <1>; +}; + +#include "cros-ec-keyboard.dtsi" -- cgit v1.2.3 From 5e794de514f56de1e78e979ca09c56a91aa2e9f1 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 24 Sep 2014 00:14:29 +0900 Subject: ARM: dts: Enable PWM node by default for s3c64xx The PWM block is required for system clock source so it must be always enabled. This patch fixes boot issues on SMDK6410 which did not have the node enabled explicitly for other purposes. Fixes: eeb93d02 ("clocksource: of: Respect device tree node status") Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/s3c6410-mini6410.dts | 4 ---- arch/arm/boot/dts/s3c64xx.dtsi | 1 - 2 files changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 57e00f9bce99..a25debb50401 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -198,10 +198,6 @@ status = "okay"; }; -&pwm { - status = "okay"; -}; - &pinctrl0 { gpio_leds: gpio-leds { samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7"; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index ff5bdaac987a..0ccb414cd268 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -172,7 +172,6 @@ clocks = <&clocks PCLK_PWM>; samsung,pwm-outputs = <0>, <1>; #pwm-cells = <3>; - status = "disabled"; }; pinctrl0: pinctrl@7f008000 { -- cgit v1.2.3 From fa781ddab92909ae06c83cf14dea09eda81d7ba4 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 24 Sep 2014 00:16:45 +0900 Subject: ARM: dts: Add rtc_src clk for s3c-rtc on exynos Peach boards commit 546b117fdf17 ("rtc: s3c: add support for RTC of Exynos3250 SoC") added an "rtc_src" DT property for the Samsung's S3C Real Time Clock controller that specifies the 32.768 kHz clock that uses the RTC as its source clock. In the case of the Peach Pit and Pi machines, the Maxim 77802 32kHz AP clock is used as the source clock. Signed-off-by: Javier Martinez Canillas Reviewed-by: Doug Anderson Reviewed-by: Chanwoo Choi Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 5 ++++- arch/arm/boot/dts/exynos5800-peach-pi.dts | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 82cdb74484cc..160c1bf1061e 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -12,6 +12,7 @@ #include #include #include +#include #include "exynos5420.dtsi" / { @@ -151,7 +152,7 @@ status = "okay"; clock-frequency = <400000>; - max77802-pmic@9 { + max77802: max77802-pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&gpx3>; interrupts = <1 IRQ_TYPE_NONE>; @@ -727,6 +728,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; + clock-names = "rtc", "rtc_src"; }; &spi_2 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 7bb1c8dd42dd..fdbcec693b6d 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -12,6 +12,7 @@ #include #include #include +#include #include "exynos5800.dtsi" / { @@ -150,7 +151,7 @@ status = "okay"; clock-frequency = <400000>; - max77802-pmic@9 { + max77802: max77802-pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&gpx3>; interrupts = <1 IRQ_TYPE_NONE>; @@ -715,6 +716,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; + clock-names = "rtc", "rtc_src"; }; &spi_2 { -- cgit v1.2.3 From 90fbb382dac5a09e72c3ef4ac7842924fc4f7cc3 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 24 Sep 2014 00:22:01 +0900 Subject: ARM: dts: Add rtc_src clk for s3c-rtc on exynos5250-snow commit 546b117fdf17 ("rtc: s3c: add support for RTC of Exynos3250 SoC") added an "rtc_src" DT property for the Samsung's S3C Real Time Clock controller that specifies the 32.768 kHz clock that uses the RTC as its source clock. In the case of the Exynos5250 based Snow board, the Maxim 77686 32kHz AP clock is used as the source clock. Signed-off-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250-snow.dts | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 7f24b00255e6..f9bc04b8f7b3 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -10,6 +10,7 @@ /dts-v1/; #include +#include #include #include #include "exynos5250.dtsi" @@ -268,7 +269,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - max77686@09 { + max77686: max77686@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; @@ -600,6 +601,8 @@ &rtc { status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; &sd3_bus4 { -- cgit v1.2.3 From 65354307c1418ee15de5bcb6cc5a7fe0c2b3d27c Mon Sep 17 00:00:00 2001 From: Naveen Krishna Chatradhi Date: Wed, 24 Sep 2014 00:39:20 +0900 Subject: ARM: dts: correct the mmc0 capability string for exynos Peach boards MMC capability for HS200 is parsed in mmc/core/host.c as dts string "mmc-hs200-1_8v". This patch corrects the dts string for Exynos5420 based peach-pit and Exynos5800 based peach-pi boards. Signed-off-by: Naveen Krishna Chatradhi Signed-off-by: Vivek Gautam Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +- arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 160c1bf1061e..9a050e19a4dc 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -561,7 +561,7 @@ status = "okay"; num-slots = <1>; broken-cd; - caps2-mmc-hs200-1_8v; + mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; card-detect-delay = <200>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index fdbcec693b6d..e8fdda827fc9 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -549,7 +549,7 @@ status = "okay"; num-slots = <1>; broken-cd; - caps2-mmc-hs200-1_8v; + mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; card-detect-delay = <200>; -- cgit v1.2.3 From 76fe98b900af6c741da63dfecb0de5f7b52ddb02 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 24 Sep 2014 01:19:53 +0900 Subject: ARM: dts: Keep eMMC regulators soft-disabled for exynos4412-trats2 In MAX77686 PMIC two regulators dedicated for eMMC memory can be controlled both by I2C interface and a GPIO pin, with the resulting regulator state being a logical OR of both. Since the GPIO control is used both by the kernel and the lowest level bootloader at reset, the regulator should be disabled by I2C control to allow it to be turned off by GPIO control. This patch removes regulator-always-on properties from both regulators and, while at it, also unsupported regulator-mem-off. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-trats2.dts | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 5e066cd87f66..a75034c5b8e8 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -399,8 +399,6 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-mem-off; }; ldo23_reg: ldo23 { @@ -503,8 +501,6 @@ regulator-name = "VMEM_VDDF_3.0V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-mem-off; }; buck9_reg: buck9 { -- cgit v1.2.3 From 7f41e1cab76e54b218bb7e3282379ed7512c5f7e Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 24 Sep 2014 01:19:58 +0900 Subject: ARM: dts: Add utility macro to define pin sleep states for exynos4x12-pinctrl This patch adds a convenient macro which constructs an Exynos pinctrl pinconf node containing properties needed to configure sleep state of given pin with given parameters. It will be used by further patch which adds a large number of sleep states for pins that need such configuration on certain boards. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 0865a2e33f97..c141931378e7 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -12,6 +12,22 @@ * published by the Free Software Foundation. */ +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 3 + +#define PIN_PDN_OUT0 0 +#define PIN_PDN_OUT1 1 +#define PIN_PDN_INPUT 2 +#define PIN_PDN_PREV 3 + +#define PIN_SLP(_pin, _mode, _pull) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-con-pdn = ; \ + samsung,pin-pud-pdn = ; \ + } + / { pinctrl@11400000 { gpa0: gpa0 { -- cgit v1.2.3 From 09918a98b7579e2155215a33b55c3d527d899b7b Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 24 Sep 2014 01:20:03 +0900 Subject: ARM: dts: Add sleep mode pin configuration for exynos4412-trats2 This patch adds sleep mode pin configuration using pin control hog mechanism to configure states of GPIO pins in sleep mode. This is required to reduce leakage current in sleep mode and prevent glitching of components on the board. Signed-off-by: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-trats2.dts | 316 ++++++++++++++++++++++++++++++++ 1 file changed, 316 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index a75034c5b8e8..61e59eb68c01 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -778,3 +778,319 @@ io-channels = <&adc 2>; /* Battery temperature */ }; }; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + sleep0: sleep-states { + PIN_SLP(gpa0-0, INPUT, NONE); + PIN_SLP(gpa0-1, OUT0, NONE); + PIN_SLP(gpa0-2, INPUT, NONE); + PIN_SLP(gpa0-3, INPUT, UP); + PIN_SLP(gpa0-4, INPUT, NONE); + PIN_SLP(gpa0-5, INPUT, DOWN); + PIN_SLP(gpa0-6, INPUT, DOWN); + PIN_SLP(gpa0-7, INPUT, UP); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, INPUT, DOWN); + PIN_SLP(gpa1-2, INPUT, DOWN); + PIN_SLP(gpa1-3, INPUT, DOWN); + PIN_SLP(gpa1-4, INPUT, DOWN); + PIN_SLP(gpa1-5, INPUT, DOWN); + + PIN_SLP(gpb-0, INPUT, NONE); + PIN_SLP(gpb-1, INPUT, NONE); + PIN_SLP(gpb-2, INPUT, NONE); + PIN_SLP(gpb-3, INPUT, NONE); + PIN_SLP(gpb-4, INPUT, DOWN); + PIN_SLP(gpb-5, INPUT, UP); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, INPUT, DOWN); + + PIN_SLP(gpc0-0, INPUT, DOWN); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, INPUT, DOWN); + PIN_SLP(gpc0-3, INPUT, DOWN); + PIN_SLP(gpc0-4, INPUT, DOWN); + + PIN_SLP(gpc1-0, INPUT, NONE); + PIN_SLP(gpc1-1, PREV, NONE); + PIN_SLP(gpc1-2, INPUT, NONE); + PIN_SLP(gpc1-3, INPUT, NONE); + PIN_SLP(gpc1-4, INPUT, NONE); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, INPUT, DOWN); + PIN_SLP(gpd0-2, INPUT, NONE); + PIN_SLP(gpd0-3, INPUT, NONE); + + PIN_SLP(gpd1-0, INPUT, DOWN); + PIN_SLP(gpd1-1, INPUT, DOWN); + PIN_SLP(gpd1-2, INPUT, NONE); + PIN_SLP(gpd1-3, INPUT, NONE); + + PIN_SLP(gpf0-0, INPUT, NONE); + PIN_SLP(gpf0-1, INPUT, NONE); + PIN_SLP(gpf0-2, INPUT, DOWN); + PIN_SLP(gpf0-3, INPUT, DOWN); + PIN_SLP(gpf0-4, INPUT, NONE); + PIN_SLP(gpf0-5, INPUT, DOWN); + PIN_SLP(gpf0-6, INPUT, NONE); + PIN_SLP(gpf0-7, INPUT, DOWN); + + PIN_SLP(gpf1-0, INPUT, DOWN); + PIN_SLP(gpf1-1, INPUT, DOWN); + PIN_SLP(gpf1-2, INPUT, DOWN); + PIN_SLP(gpf1-3, INPUT, DOWN); + PIN_SLP(gpf1-4, INPUT, NONE); + PIN_SLP(gpf1-5, INPUT, NONE); + PIN_SLP(gpf1-6, INPUT, DOWN); + PIN_SLP(gpf1-7, PREV, NONE); + + PIN_SLP(gpf2-0, PREV, NONE); + PIN_SLP(gpf2-1, INPUT, DOWN); + PIN_SLP(gpf2-2, INPUT, DOWN); + PIN_SLP(gpf2-3, INPUT, DOWN); + PIN_SLP(gpf2-4, INPUT, DOWN); + PIN_SLP(gpf2-5, INPUT, DOWN); + PIN_SLP(gpf2-6, INPUT, NONE); + PIN_SLP(gpf2-7, INPUT, NONE); + + PIN_SLP(gpf3-0, INPUT, NONE); + PIN_SLP(gpf3-1, PREV, NONE); + PIN_SLP(gpf3-2, PREV, NONE); + PIN_SLP(gpf3-3, PREV, NONE); + PIN_SLP(gpf3-4, OUT1, NONE); + PIN_SLP(gpf3-5, INPUT, DOWN); + + PIN_SLP(gpj0-0, PREV, NONE); + PIN_SLP(gpj0-1, PREV, NONE); + PIN_SLP(gpj0-2, PREV, NONE); + PIN_SLP(gpj0-3, INPUT, DOWN); + PIN_SLP(gpj0-4, PREV, NONE); + PIN_SLP(gpj0-5, PREV, NONE); + PIN_SLP(gpj0-6, INPUT, DOWN); + PIN_SLP(gpj0-7, INPUT, DOWN); + + PIN_SLP(gpj1-0, INPUT, DOWN); + PIN_SLP(gpj1-1, PREV, NONE); + PIN_SLP(gpj1-2, PREV, NONE); + PIN_SLP(gpj1-3, INPUT, DOWN); + PIN_SLP(gpj1-4, INPUT, DOWN); + }; +}; + +&pinctrl_1 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep1>; + + sleep1: sleep-states { + PIN_SLP(gpk0-0, PREV, NONE); + PIN_SLP(gpk0-1, PREV, NONE); + PIN_SLP(gpk0-2, OUT0, NONE); + PIN_SLP(gpk0-3, PREV, NONE); + PIN_SLP(gpk0-4, PREV, NONE); + PIN_SLP(gpk0-5, PREV, NONE); + PIN_SLP(gpk0-6, PREV, NONE); + + PIN_SLP(gpk1-0, INPUT, DOWN); + PIN_SLP(gpk1-1, INPUT, DOWN); + PIN_SLP(gpk1-2, INPUT, DOWN); + PIN_SLP(gpk1-3, PREV, NONE); + PIN_SLP(gpk1-4, PREV, NONE); + PIN_SLP(gpk1-5, PREV, NONE); + PIN_SLP(gpk1-6, PREV, NONE); + + PIN_SLP(gpk2-0, INPUT, DOWN); + PIN_SLP(gpk2-1, INPUT, DOWN); + PIN_SLP(gpk2-2, INPUT, DOWN); + PIN_SLP(gpk2-3, INPUT, DOWN); + PIN_SLP(gpk2-4, INPUT, DOWN); + PIN_SLP(gpk2-5, INPUT, DOWN); + PIN_SLP(gpk2-6, INPUT, DOWN); + + PIN_SLP(gpk3-0, OUT0, NONE); + PIN_SLP(gpk3-1, INPUT, NONE); + PIN_SLP(gpk3-2, INPUT, DOWN); + PIN_SLP(gpk3-3, INPUT, NONE); + PIN_SLP(gpk3-4, INPUT, NONE); + PIN_SLP(gpk3-5, INPUT, NONE); + PIN_SLP(gpk3-6, INPUT, NONE); + + PIN_SLP(gpl0-0, INPUT, DOWN); + PIN_SLP(gpl0-1, INPUT, DOWN); + PIN_SLP(gpl0-2, INPUT, DOWN); + PIN_SLP(gpl0-3, INPUT, DOWN); + PIN_SLP(gpl0-4, PREV, NONE); + PIN_SLP(gpl0-6, PREV, NONE); + + PIN_SLP(gpl1-0, INPUT, DOWN); + PIN_SLP(gpl1-1, INPUT, DOWN); + PIN_SLP(gpl2-0, INPUT, DOWN); + PIN_SLP(gpl2-1, INPUT, DOWN); + PIN_SLP(gpl2-2, INPUT, DOWN); + PIN_SLP(gpl2-3, INPUT, DOWN); + PIN_SLP(gpl2-4, INPUT, DOWN); + PIN_SLP(gpl2-5, INPUT, DOWN); + PIN_SLP(gpl2-6, PREV, NONE); + PIN_SLP(gpl2-7, INPUT, DOWN); + + PIN_SLP(gpm0-0, INPUT, DOWN); + PIN_SLP(gpm0-1, INPUT, DOWN); + PIN_SLP(gpm0-2, INPUT, DOWN); + PIN_SLP(gpm0-3, INPUT, DOWN); + PIN_SLP(gpm0-4, INPUT, DOWN); + PIN_SLP(gpm0-5, INPUT, DOWN); + PIN_SLP(gpm0-6, INPUT, DOWN); + PIN_SLP(gpm0-7, INPUT, DOWN); + + PIN_SLP(gpm1-0, INPUT, DOWN); + PIN_SLP(gpm1-1, INPUT, DOWN); + PIN_SLP(gpm1-2, INPUT, NONE); + PIN_SLP(gpm1-3, INPUT, NONE); + PIN_SLP(gpm1-4, INPUT, NONE); + PIN_SLP(gpm1-5, INPUT, NONE); + PIN_SLP(gpm1-6, INPUT, DOWN); + + PIN_SLP(gpm2-0, INPUT, NONE); + PIN_SLP(gpm2-1, INPUT, NONE); + PIN_SLP(gpm2-2, INPUT, DOWN); + PIN_SLP(gpm2-3, INPUT, DOWN); + PIN_SLP(gpm2-4, INPUT, DOWN); + + PIN_SLP(gpm3-0, PREV, NONE); + PIN_SLP(gpm3-1, PREV, NONE); + PIN_SLP(gpm3-2, PREV, NONE); + PIN_SLP(gpm3-3, OUT1, NONE); + PIN_SLP(gpm3-4, INPUT, DOWN); + PIN_SLP(gpm3-5, INPUT, DOWN); + PIN_SLP(gpm3-6, INPUT, DOWN); + PIN_SLP(gpm3-7, INPUT, DOWN); + + PIN_SLP(gpm4-0, INPUT, DOWN); + PIN_SLP(gpm4-1, INPUT, DOWN); + PIN_SLP(gpm4-2, INPUT, DOWN); + PIN_SLP(gpm4-3, INPUT, DOWN); + PIN_SLP(gpm4-4, INPUT, DOWN); + PIN_SLP(gpm4-5, INPUT, DOWN); + PIN_SLP(gpm4-6, INPUT, DOWN); + PIN_SLP(gpm4-7, INPUT, DOWN); + + PIN_SLP(gpy0-0, INPUT, DOWN); + PIN_SLP(gpy0-1, INPUT, DOWN); + PIN_SLP(gpy0-2, INPUT, DOWN); + PIN_SLP(gpy0-3, INPUT, DOWN); + PIN_SLP(gpy0-4, INPUT, DOWN); + PIN_SLP(gpy0-5, INPUT, DOWN); + + PIN_SLP(gpy1-0, INPUT, DOWN); + PIN_SLP(gpy1-1, INPUT, DOWN); + PIN_SLP(gpy1-2, INPUT, DOWN); + PIN_SLP(gpy1-3, INPUT, DOWN); + + PIN_SLP(gpy2-0, PREV, NONE); + PIN_SLP(gpy2-1, INPUT, DOWN); + PIN_SLP(gpy2-2, INPUT, NONE); + PIN_SLP(gpy2-3, INPUT, NONE); + PIN_SLP(gpy2-4, INPUT, NONE); + PIN_SLP(gpy2-5, INPUT, NONE); + + PIN_SLP(gpy3-0, INPUT, DOWN); + PIN_SLP(gpy3-1, INPUT, DOWN); + PIN_SLP(gpy3-2, INPUT, DOWN); + PIN_SLP(gpy3-3, INPUT, DOWN); + PIN_SLP(gpy3-4, INPUT, DOWN); + PIN_SLP(gpy3-5, INPUT, DOWN); + PIN_SLP(gpy3-6, INPUT, DOWN); + PIN_SLP(gpy3-7, INPUT, DOWN); + + PIN_SLP(gpy4-0, INPUT, DOWN); + PIN_SLP(gpy4-1, INPUT, DOWN); + PIN_SLP(gpy4-2, INPUT, DOWN); + PIN_SLP(gpy4-3, INPUT, DOWN); + PIN_SLP(gpy4-4, INPUT, DOWN); + PIN_SLP(gpy4-5, INPUT, DOWN); + PIN_SLP(gpy4-6, INPUT, DOWN); + PIN_SLP(gpy4-7, INPUT, DOWN); + + PIN_SLP(gpy5-0, INPUT, DOWN); + PIN_SLP(gpy5-1, INPUT, DOWN); + PIN_SLP(gpy5-2, INPUT, DOWN); + PIN_SLP(gpy5-3, INPUT, DOWN); + PIN_SLP(gpy5-4, INPUT, DOWN); + PIN_SLP(gpy5-5, INPUT, DOWN); + PIN_SLP(gpy5-6, INPUT, DOWN); + PIN_SLP(gpy5-7, INPUT, DOWN); + + PIN_SLP(gpy6-0, INPUT, DOWN); + PIN_SLP(gpy6-1, INPUT, DOWN); + PIN_SLP(gpy6-2, INPUT, DOWN); + PIN_SLP(gpy6-3, INPUT, DOWN); + PIN_SLP(gpy6-4, INPUT, DOWN); + PIN_SLP(gpy6-5, INPUT, DOWN); + PIN_SLP(gpy6-6, INPUT, DOWN); + PIN_SLP(gpy6-7, INPUT, DOWN); + }; +}; + +&pinctrl_2 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep2>; + + sleep2: sleep-states { + PIN_SLP(gpz-0, INPUT, DOWN); + PIN_SLP(gpz-1, INPUT, DOWN); + PIN_SLP(gpz-2, INPUT, DOWN); + PIN_SLP(gpz-3, INPUT, DOWN); + PIN_SLP(gpz-4, INPUT, DOWN); + PIN_SLP(gpz-5, INPUT, DOWN); + PIN_SLP(gpz-6, INPUT, DOWN); + }; +}; + +&pinctrl_3 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep3>; + + sleep3: sleep-states { + PIN_SLP(gpv0-0, INPUT, DOWN); + PIN_SLP(gpv0-1, INPUT, DOWN); + PIN_SLP(gpv0-2, INPUT, DOWN); + PIN_SLP(gpv0-3, INPUT, DOWN); + PIN_SLP(gpv0-4, INPUT, DOWN); + PIN_SLP(gpv0-5, INPUT, DOWN); + PIN_SLP(gpv0-6, INPUT, DOWN); + PIN_SLP(gpv0-7, INPUT, DOWN); + + PIN_SLP(gpv1-0, INPUT, DOWN); + PIN_SLP(gpv1-1, INPUT, DOWN); + PIN_SLP(gpv1-2, INPUT, DOWN); + PIN_SLP(gpv1-3, INPUT, DOWN); + PIN_SLP(gpv1-4, INPUT, DOWN); + PIN_SLP(gpv1-5, INPUT, DOWN); + PIN_SLP(gpv1-6, INPUT, DOWN); + PIN_SLP(gpv1-7, INPUT, DOWN); + + PIN_SLP(gpv2-0, INPUT, DOWN); + PIN_SLP(gpv2-1, INPUT, DOWN); + PIN_SLP(gpv2-2, INPUT, DOWN); + PIN_SLP(gpv2-3, INPUT, DOWN); + PIN_SLP(gpv2-4, INPUT, DOWN); + PIN_SLP(gpv2-5, INPUT, DOWN); + PIN_SLP(gpv2-6, INPUT, DOWN); + PIN_SLP(gpv2-7, INPUT, DOWN); + + PIN_SLP(gpv3-0, INPUT, DOWN); + PIN_SLP(gpv3-1, INPUT, DOWN); + PIN_SLP(gpv3-2, INPUT, DOWN); + PIN_SLP(gpv3-3, INPUT, DOWN); + PIN_SLP(gpv3-4, INPUT, DOWN); + PIN_SLP(gpv3-5, INPUT, DOWN); + PIN_SLP(gpv3-6, INPUT, DOWN); + PIN_SLP(gpv3-7, INPUT, DOWN); + + PIN_SLP(gpv4-0, INPUT, DOWN); + }; +}; -- cgit v1.2.3 From 7eec1266751bd3a25e35ce88686634c768fedc24 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 24 Sep 2014 01:22:49 +0900 Subject: ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2 The MAX77693 is a companion power management IC for smart phones and tablets. The MAX77693 contains input over-voltage protection (OVP), a fully-integrated 2.5A switching charger for Lithium Ion battery with integrated battery disconnect, OTG/accessory 5V output power, a high-current white LED driver for camera flash, two safeout LDOs, a haptic motor driver, Model Gauge m3 battery fuel gauge and MicroUSB Interface Controller (MUIC). I2C serial interface is used for communicating. Add MAX77693 node to the Trats2 board. This allows using: - charger regulator, - 2 safeout LDO regulators (for USB OTG), - extcon. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-trats2.dts | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 61e59eb68c01..dd9ac66770f7 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include / { model = "Samsung Trats 2 based on Exynos4412"; @@ -22,6 +23,7 @@ aliases { i2c9 = &i2c_ak8975; i2c10 = &i2c_cm36651; + i2c11 = &i2c_max77693; }; memory { @@ -514,6 +516,36 @@ }; }; + i2c_max77693: i2c-gpio-1 { + compatible = "i2c-gpio"; + gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max77693@66 { + compatible = "maxim,max77693"; + interrupt-parent = <&gpx1>; + interrupts = <5 2>; + reg = <0x66>; + + regulators { + esafeout1_reg: ESAFEOUT1@1 { + regulator-name = "ESAFEOUT1"; + }; + esafeout2_reg: ESAFEOUT2@2 { + regulator-name = "ESAFEOUT2"; + }; + charger_reg: CHARGER@0 { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + }; + }; + mmc@12550000 { num-slots = <1>; broken-cd; -- cgit v1.2.3 From 752d3a23d1f68de87e3cb6e0a9652143f1ea0a1a Mon Sep 17 00:00:00 2001 From: Jacek Anaszewski Date: Wed, 24 Sep 2014 01:33:23 +0900 Subject: ARM: dts: add MFC codec device node for exynos3250 Signed-off-by: Jacek Anaszewski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos3250.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 693a3275606f..242ddda0a8cd 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -320,6 +320,16 @@ status = "disabled"; }; + mfc: codec@13400000 { + compatible = "samsung,mfc-v7"; + reg = <0x13400000 0x10000>; + interrupts = <0 102 0>; + clock-names = "mfc", "sclk_mfc"; + clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>; + samsung,power-domain = <&pd_mfc>; + status = "disabled"; + }; + serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; -- cgit v1.2.3 From e540920cf21c2764047b8a6ddaeaa0683624e46e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 25 Sep 2014 17:40:14 +0900 Subject: ARM: dts: add CPU nodes for Exynos4 SoCs Recent patch by Tomasz Figa ("irqchip: gic: Fix core ID calculation when topology is read from DT") fixed GIC driver to filter cluster ID from values returned by cpu_logical_map() for SoCs having registers mapped without per-CPU banking making it is possible to add CPU nodes for Exynos4 SoCs. In case of Exynos SoCs these CPU nodes are also required by future changes adding initialization of cpuidle states in Exynos cpuidle driver through DT. Tested on Origen board (Exynos4210 SoC) and Trats2 (Exynos4412 SoC). Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4210.dtsi | 17 +++++++++++++++++ arch/arm/boot/dts/exynos4212.dtsi | 17 +++++++++++++++++ arch/arm/boot/dts/exynos4412.dtsi | 29 +++++++++++++++++++++++++++++ 3 files changed, 63 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 807bb5bf91fc..bcc9e63c8070 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,23 @@ pinctrl2 = &pinctrl_2; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@900 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x900>; + }; + + cpu@901 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x901>; + }; + }; + pmu_system_controller: system-controller@10020000 { clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index 3c00e6ec9302..dd0a43ec56da 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -22,6 +22,23 @@ / { compatible = "samsung,exynos4212", "samsung,exynos4"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@A00 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA00>; + }; + + cpu@A01 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA01>; + }; + }; + combiner: interrupt-controller@10440000 { samsung,combiner-nr = <18>; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index d8bc059e172f..0f6ec93bb1d8 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -22,6 +22,35 @@ / { compatible = "samsung,exynos4412", "samsung,exynos4"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@A00 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA00>; + }; + + cpu@A01 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA01>; + }; + + cpu@A02 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA02>; + }; + + cpu@A03 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA03>; + }; + }; + combiner: interrupt-controller@10440000 { samsung,combiner-nr = <20>; }; -- cgit v1.2.3 From e3bc1e2421a14dcc273bf945343a6c948e839c8c Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 4 Sep 2013 11:37:53 +0100 Subject: microblaze: io: remove dummy relaxed accessor macros These are now defined by asm-generic/io.h, so we don't need the private definitions anymore. Acked-by: Michal Simek Signed-off-by: Will Deacon --- arch/microblaze/include/asm/io.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index 433751b2a003..940f5fc1d1da 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -69,12 +69,4 @@ extern void __iomem *ioremap(phys_addr_t address, unsigned long size); #include -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl - -#define writeb_relaxed writeb -#define writew_relaxed writew -#define writel_relaxed writel - #endif /* _ASM_MICROBLAZE_IO_H */ -- cgit v1.2.3 From 916136b374566181386bb79ed638de8a8d8b426e Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 4 Sep 2013 11:37:53 +0100 Subject: s390: io: remove dummy relaxed accessor macros for reads These are now defined by asm-generic/io.h, so we don't need the private definitions anymore. Cc: Heiko Carstens Cc: Martin Schwidefsky Signed-off-by: Will Deacon --- arch/s390/include/asm/io.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/io.h b/arch/s390/include/asm/io.h index cd6b9ee7b69c..722befdf8332 100644 --- a/arch/s390/include/asm/io.h +++ b/arch/s390/include/asm/io.h @@ -60,11 +60,6 @@ static inline void iounmap(volatile void __iomem *addr) #define __raw_writel zpci_write_u32 #define __raw_writeq zpci_write_u64 -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl -#define readq_relaxed readq - #endif /* CONFIG_PCI */ #include -- cgit v1.2.3 From affd2ae5de035e3edc212985299bd3da2660ce1d Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 4 Sep 2013 11:37:53 +0100 Subject: xtensa: io: remove dummy relaxed accessor macros for reads These are now defined by asm-generic/io.h, so we don't need the private definitions anymore. Cc: Chris Zankel Acked-by: Max Filippov Signed-off-by: Will Deacon --- arch/xtensa/include/asm/io.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h index 74944207167e..fe1600a09438 100644 --- a/arch/xtensa/include/asm/io.h +++ b/arch/xtensa/include/asm/io.h @@ -74,13 +74,6 @@ static inline void iounmap(volatile void __iomem *addr) #endif /* CONFIG_MMU */ -/* - * Generic I/O - */ -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl - #endif /* __KERNEL__ */ #include -- cgit v1.2.3 From 88a681698008515103e9a5afad229e25510c1e43 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 3 Sep 2013 18:36:05 +0100 Subject: frv: io: implement dummy relaxed accessor macros for writes write{b,w,l}_relaxed are implemented by some architectures in order to permit memory-mapped I/O accesses with weaker barrier semantics than the non-relaxed variants. This patch adds dummy macros for the write accessors to frv, in the same vein as the dummy definitions for the relaxed read accessors. Cc: David Howells Signed-off-by: Will Deacon --- arch/frv/include/asm/io.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/frv/include/asm/io.h b/arch/frv/include/asm/io.h index 8cb50a2fbcb2..99bb7efaf9b7 100644 --- a/arch/frv/include/asm/io.h +++ b/arch/frv/include/asm/io.h @@ -243,6 +243,9 @@ static inline void writel(uint32_t datum, volatile void __iomem *addr) __flush_PCI_writes(); } +#define writeb_relaxed writeb +#define writew_relaxed writew +#define writel_relaxed writel /* Values for nocacheflag and cmode */ #define IOMAP_FULL_CACHING 0 -- cgit v1.2.3 From 62e8abf7161b6a0dd32752cd7c60237988f8bff7 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 3 Sep 2013 18:56:46 +0100 Subject: cris: io: implement dummy relaxed accessor macros for writes write{b,w,l}_relaxed are implemented by some architectures in order to permit memory-mapped I/O accesses with weaker barrier semantics than the non-relaxed variants. This patch adds dummy macros for the write accessors to Cris, in the same vein as the dummy definitions for the relaxed read accessors. Cc: Mikael Starvik Acked-by: Jesper Nilsson Signed-off-by: Will Deacon --- arch/cris/include/asm/io.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/cris/include/asm/io.h b/arch/cris/include/asm/io.h index e59dba12ce94..752a3f45df60 100644 --- a/arch/cris/include/asm/io.h +++ b/arch/cris/include/asm/io.h @@ -112,6 +112,9 @@ static inline void writel(unsigned int b, volatile void __iomem *addr) else *(volatile unsigned int __force *) addr = b; } +#define writeb_relaxed(b, addr) writeb(b, addr) +#define writew_relaxed(b, addr) writew(b, addr) +#define writel_relaxed(b, addr) writel(b, addr) #define __raw_writeb writeb #define __raw_writew writew #define __raw_writel writel -- cgit v1.2.3 From f6b3b7a9fa44ffa01f9c4f5ed13a9c48921e1ff2 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 3 Sep 2013 19:10:11 +0100 Subject: ia64: io: implement dummy relaxed accessor macros for writes write{b,w,l,q}_relaxed are implemented by some architectures in order to permit memory-mapped I/O accesses with weaker barrier semantics than the non-relaxed variants. This patch adds dummy macros for the write accessors to ia64, which may be able to be optimised in a similar manner to the relaxed read accessors at a later date. Cc: Tony Luck Signed-off-by: Will Deacon --- arch/ia64/include/asm/io.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h index bee0acd52f7e..80a7e34be009 100644 --- a/arch/ia64/include/asm/io.h +++ b/arch/ia64/include/asm/io.h @@ -393,6 +393,10 @@ __writeq (unsigned long val, volatile void __iomem *addr) #define writew(v,a) __writew((v), (a)) #define writel(v,a) __writel((v), (a)) #define writeq(v,a) __writeq((v), (a)) +#define writeb_relaxed(v,a) __writeb((v), (a)) +#define writew_relaxed(v,a) __writew((v), (a)) +#define writel_relaxed(v,a) __writel((v), (a)) +#define writeq_relaxed(v,a) __writeq((v), (a)) #define __raw_writeb writeb #define __raw_writew writew #define __raw_writel writel -- cgit v1.2.3 From cb147c0f0b33f5ba37dfd07014f2973a53bc5d62 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 3 Sep 2013 19:11:58 +0100 Subject: m32r: io: implement dummy relaxed accessor macros for writes write{b,w,l}_relaxed are implemented by some architectures in order to permit memory-mapped I/O accesses with weaker barrier semantics than the non-relaxed variants. This patch adds dummy macros for the write accessors to m32r, in the same vein as the dummy definitions for the relaxed read accessors. Cc: Hirokazu Takata Signed-off-by: Will Deacon --- arch/m32r/include/asm/io.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h index 4010f1fc5b65..6e7787f3dac7 100644 --- a/arch/m32r/include/asm/io.h +++ b/arch/m32r/include/asm/io.h @@ -161,6 +161,9 @@ static inline void _writel(unsigned long l, unsigned long addr) #define __raw_writeb writeb #define __raw_writew writew #define __raw_writel writel +#define writeb_relaxed writeb +#define writew_relaxed writew +#define writel_relaxed writel #define ioread8 read #define ioread16 readw -- cgit v1.2.3 From 88a9192e216fef5f198f860d14e84f7e3c840ace Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 3 Sep 2013 19:15:42 +0100 Subject: m68k: io: implement dummy relaxed accessor macros for writes write{b,w,l}_relaxed are implemented by some architectures in order to permit memory-mapped I/O accesses with weaker barrier semantics than the non-relaxed variants. This patch adds dummy macros for the write accessors to m68k, in the same vein as the dummy definitions for the relaxed read accessors. Additionally, the existing relaxed read accessors are moved into asm/io.h, so that they can be used by m68k targets with an MMU. Acked-by: Geert Uytterhoeven Signed-off-by: Will Deacon --- arch/m68k/include/asm/io.h | 8 ++++++++ arch/m68k/include/asm/io_no.h | 4 ---- 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/io.h b/arch/m68k/include/asm/io.h index c70cc9155003..bccd5a914eb6 100644 --- a/arch/m68k/include/asm/io.h +++ b/arch/m68k/include/asm/io.h @@ -3,3 +3,11 @@ #else #include #endif + +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) + +#define writeb_relaxed(b, addr) writeb(b, addr) +#define writew_relaxed(b, addr) writew(b, addr) +#define writel_relaxed(b, addr) writel(b, addr) diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h index be4b5a813ad4..a93c8cde4d38 100644 --- a/arch/m68k/include/asm/io_no.h +++ b/arch/m68k/include/asm/io_no.h @@ -40,10 +40,6 @@ static inline unsigned int _swapl(volatile unsigned long v) #define readl(addr) \ ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; }) -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - #define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) #define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) #define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) -- cgit v1.2.3 From 960a5597c39109ed2e12964cd9dc34857e5afee2 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 3 Sep 2013 19:17:02 +0100 Subject: mn10300: io: implement dummy relaxed accessor macros for writes write{b,w,l}_relaxed are implemented by some architectures in order to permit memory-mapped I/O accesses with weaker barrier semantics than the non-relaxed variants. This patch adds dummy macros for the write accessors to mn10300, in the same vein as the dummy definitions for the relaxed read accessors. Cc: David Howells Signed-off-by: Will Deacon --- arch/mn10300/include/asm/io.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/mn10300/include/asm/io.h b/arch/mn10300/include/asm/io.h index e6ed0d897ccc..897ba3c12b32 100644 --- a/arch/mn10300/include/asm/io.h +++ b/arch/mn10300/include/asm/io.h @@ -67,6 +67,10 @@ static inline void writel(u32 b, volatile void __iomem *addr) #define __raw_writew writew #define __raw_writel writel +#define writeb_relaxed writeb +#define writew_relaxed writew +#define writel_relaxed writel + /*****************************************************************************/ /* * traditional input/output functions -- cgit v1.2.3 From 2f083481cfd38320ebde0b83d836b967a2419d53 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 4 Sep 2013 11:34:08 +0100 Subject: parisc: io: implement dummy relaxed accessor macros for writes write{b,w,l,q}_relaxed are implemented by some architectures in order to permit memory-mapped I/O accesses with weaker barrier semantics than the non-relaxed variants. This patch adds dummy macros for the write accessors to parisc, in the same vein as the dummy definitions for the relaxed read accessors. Cc: Helge Deller Signed-off-by: Will Deacon --- arch/parisc/include/asm/io.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h index 1f6d2ae7aba5..8cd0abf28ffb 100644 --- a/arch/parisc/include/asm/io.h +++ b/arch/parisc/include/asm/io.h @@ -217,10 +217,14 @@ static inline void writeq(unsigned long long q, volatile void __iomem *addr) #define writel writel #define writeq writeq -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) -#define readq_relaxed(addr) readq(addr) +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) +#define readq_relaxed(addr) readq(addr) +#define writeb_relaxed(b, addr) writeb(b, addr) +#define writew_relaxed(w, addr) writew(w, addr) +#define writel_relaxed(l, addr) writel(l, addr) +#define writeq_relaxed(q, addr) writeq(q, addr) #define mmiowb() do { } while (0) -- cgit v1.2.3 From 5da590574cbc39e48d1b71d87b62766c044b9b52 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 4 Sep 2013 11:34:08 +0100 Subject: powerpc: io: implement dummy relaxed accessor macros for writes write{b,w,l,q}_relaxed are implemented by some architectures in order to permit memory-mapped I/O accesses with weaker barrier semantics than the non-relaxed variants. This patch adds dummy macros for the write accessors to powerpc, in the same vein as the dummy definitions for the relaxed read accessors. Cc: Benjamin Herrenschmidt Signed-off-by: Will Deacon --- arch/powerpc/include/asm/io.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h index 97d3869991ca..9eaf301ac952 100644 --- a/arch/powerpc/include/asm/io.h +++ b/arch/powerpc/include/asm/io.h @@ -617,10 +617,14 @@ static inline void name at \ /* * We don't do relaxed operations yet, at least not with this semantic */ -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) -#define readq_relaxed(addr) readq(addr) +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) +#define readq_relaxed(addr) readq(addr) +#define writeb_relaxed(v, addr) writeb(v, addr) +#define writew_relaxed(v, addr) writew(v, addr) +#define writel_relaxed(v, addr) writel(v, addr) +#define writeq_relaxed(v, addr) writeq(v, addr) #ifdef CONFIG_PPC32 #define mmiowb() -- cgit v1.2.3 From 1191ccb34cf810a0fefaaf5ca3cfe3c5d7675927 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 4 Sep 2013 11:34:08 +0100 Subject: sparc: io: implement dummy relaxed accessor macros for writes write{b,w,l,q}_relaxed are implemented by some architectures in order to permit memory-mapped I/O accesses with weaker barrier semantics than the non-relaxed variants. This patch adds dummy macros for the write accessors to sparc, in the same vein as the dummy definitions for the relaxed read accessors. The existing relaxed read{b,w,l} accessors are moved into asm/io.h, since they are identical between 32-bit and 64-bit machines. Acked-by: "David S. Miller" Acked-by: Sam Ravnborg Signed-off-by: Will Deacon --- arch/sparc/include/asm/io.h | 9 +++++++++ arch/sparc/include/asm/io_32.h | 4 ---- arch/sparc/include/asm/io_64.h | 8 ++------ 3 files changed, 11 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/io.h b/arch/sparc/include/asm/io.h index f6902cf3cbe9..493f22c4684f 100644 --- a/arch/sparc/include/asm/io.h +++ b/arch/sparc/include/asm/io.h @@ -10,6 +10,15 @@ * Defines used for both SPARC32 and SPARC64 */ +/* Relaxed accessors for MMIO */ +#define readb_relaxed(__addr) readb(__addr) +#define readw_relaxed(__addr) readw(__addr) +#define readl_relaxed(__addr) readl(__addr) + +#define writeb_relaxed(__b, __addr) writeb(__b, __addr) +#define writew_relaxed(__w, __addr) writew(__w, __addr) +#define writel_relaxed(__l, __addr) writel(__l, __addr) + /* Big endian versions of memory read/write routines */ #define readb_be(__addr) __raw_readb(__addr) #define readw_be(__addr) __raw_readw(__addr) diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h index 9f532902627c..407ac14295f4 100644 --- a/arch/sparc/include/asm/io_32.h +++ b/arch/sparc/include/asm/io_32.h @@ -4,10 +4,6 @@ #include #include /* struct resource */ -#define readb_relaxed(__addr) readb(__addr) -#define readw_relaxed(__addr) readw(__addr) -#define readl_relaxed(__addr) readl(__addr) - #define IO_SPACE_LIMIT 0xffffffff #define memset_io(d,c,sz) _memset_io(d,c,sz) diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h index 80b54b326d49..d50e6127325d 100644 --- a/arch/sparc/include/asm/io_64.h +++ b/arch/sparc/include/asm/io_64.h @@ -136,6 +136,7 @@ static inline u32 readl(const volatile void __iomem *addr) } #define readq readq +#define readq_relaxed readq static inline u64 readq(const volatile void __iomem *addr) { u64 ret; @@ -175,6 +176,7 @@ static inline void writel(u32 l, volatile void __iomem *addr) } #define writeq writeq +#define writeq_relaxed writeq static inline void writeq(u64 q, volatile void __iomem *addr) { __asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */" @@ -183,7 +185,6 @@ static inline void writeq(u64 q, volatile void __iomem *addr) : "memory"); } - #define inb inb static inline u8 inb(unsigned long addr) { @@ -264,11 +265,6 @@ static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned l outsl((unsigned long __force)port, buf, count); } -#define readb_relaxed(__addr) readb(__addr) -#define readw_relaxed(__addr) readw(__addr) -#define readl_relaxed(__addr) readl(__addr) -#define readq_relaxed(__addr) readq(__addr) - /* Valid I/O Space regions are anywhere, because each PCI bus supported * can live in an arbitrary area of the physical address range. */ -- cgit v1.2.3 From 579cadee96542200b69efa3bda7ec4898c8153f6 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 4 Sep 2013 11:34:08 +0100 Subject: tile: io: implement dummy relaxed accessor macros for writes write{b,w,l,q}_relaxed are implemented by some architectures in order to permit memory-mapped I/O accesses with weaker barrier semantics than the non-relaxed variants. This patch adds dummy macros for the write accessors to tile, in the same vein as the dummy definitions for the relaxed read accessors. Acked-by: Chris Metcalf Signed-off-by: Will Deacon --- arch/tile/include/asm/io.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h index 9fe434969fab..d372641054d9 100644 --- a/arch/tile/include/asm/io.h +++ b/arch/tile/include/asm/io.h @@ -241,6 +241,10 @@ static inline void writeq(u64 val, unsigned long addr) #define readw_relaxed readw #define readl_relaxed readl #define readq_relaxed readq +#define writeb_relaxed writeb +#define writew_relaxed writew +#define writel_relaxed writel +#define writeq_relaxed writeq #define ioread8 readb #define ioread16 readw -- cgit v1.2.3 From cbc908ef8e6babc40cb929f46ea1b8a26cbdbce0 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 4 Sep 2013 11:34:08 +0100 Subject: x86: io: implement dummy relaxed accessor macros for writes write{b,w,l,q}_relaxed are implemented by some architectures in order to permit memory-mapped I/O accesses with weaker barrier semantics than the non-relaxed variants. This patch adds dummy macros for the write accessors to x86, in the same vein as the dummy definitions for the relaxed read accessors. Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Signed-off-by: Will Deacon --- arch/x86/include/asm/io.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index b8237d8a1e0c..2ea07f5ec7b7 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -74,6 +74,9 @@ build_mmio_write(__writel, "l", unsigned int, "r", ) #define __raw_readw __readw #define __raw_readl __readl +#define writeb_relaxed(v, a) __writeb(v, a) +#define writew_relaxed(v, a) __writew(v, a) +#define writel_relaxed(v, a) __writel(v, a) #define __raw_writeb __writeb #define __raw_writew __writew #define __raw_writel __writel @@ -86,6 +89,7 @@ build_mmio_read(readq, "q", unsigned long, "=r", :"memory") build_mmio_write(writeq, "q", unsigned long, "r", :"memory") #define readq_relaxed(a) readq(a) +#define writeq_relaxed(v, a) writeq(v, a) #define __raw_readq(a) readq(a) #define __raw_writeq(val, addr) writeq(val, addr) -- cgit v1.2.3 From 2de4752d6923d7dcc6e68c23be6a52d5f0896f9d Mon Sep 17 00:00:00 2001 From: Soren Brinkmann Date: Wed, 15 Oct 2014 09:39:53 -0700 Subject: ARM: zynq: Actually remove hotplug.c Commit 'ARM: zynq: Remove hotplug.c' (caf86a73eab4132f870e883216850d9eee40b04b) was supposed to remove hotplug.c - but it didn't. It moved all content from hotplug.c elsewhere and removed its entry from the Makefile, but missed to actually remove the whole file. Remove it now. Signed-off-by: Soren Brinkmann Signed-off-by: Michal Simek --- arch/arm/mach-zynq/Makefile | 2 -- arch/arm/mach-zynq/hotplug.c | 14 -------------- 2 files changed, 16 deletions(-) delete mode 100644 arch/arm/mach-zynq/hotplug.c (limited to 'arch') diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile index c85fb3f7d5cd..b03a97eb7501 100644 --- a/arch/arm/mach-zynq/Makefile +++ b/arch/arm/mach-zynq/Makefile @@ -4,6 +4,4 @@ # Common support obj-y := common.o slcr.o pm.o -CFLAGS_REMOVE_hotplug.o =-march=armv6k -CFLAGS_hotplug.o =-Wa,-march=armv7-a -mcpu=cortex-a9 obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-zynq/hotplug.c b/arch/arm/mach-zynq/hotplug.c deleted file mode 100644 index b685c89f11e4..000000000000 --- a/arch/arm/mach-zynq/hotplug.c +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright (C) 2012-2013 Xilinx - * - * based on linux/arch/arm/mach-realview/hotplug.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - -- cgit v1.2.3 From 81b43a6e2d072126df5eb016524819f6921262f3 Mon Sep 17 00:00:00 2001 From: Marc Carino Date: Wed, 13 Aug 2014 15:50:02 -0700 Subject: ARM: brcmstb: add debug UART for earlyprintk support Add the UART definitions needed to support earlyprintk on brcmstb machines. Signed-off-by: Marc Carino Acked-by: Florian Fainelli Acked-by: Arnd Bergmann Signed-off-by: Brian Norris Signed-off-by: Florian Fainelli --- arch/arm/Kconfig.debug | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 03dc4c1a8736..6a4ee008b092 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -139,6 +139,17 @@ choice Say Y here if you want kernel low-level debugging support on Marvell Berlin SoC based platforms. + config DEBUG_BRCMSTB_UART + bool "Use BRCMSTB UART for low-level debug" + depends on ARCH_BRCMSTB + select DEBUG_UART_8250 + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + + If you have a Broadcom STB chip and would like early print + messages to appear over the UART, select this option. + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -1153,6 +1164,7 @@ config DEBUG_UART_PHYS default 0xe0000000 if ARCH_SPEAR13XX default 0xe4007000 if DEBUG_HIP04_UART default 0xf0000be0 if ARCH_EBSA110 + default 0xf040ab00 if DEBUG_BRCMSTB_UART default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_ORION5X @@ -1204,6 +1216,7 @@ config DEBUG_UART_VIRT default 0xfb002000 if DEBUG_CNS3XXX default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT + default 0xfc40ab00 if DEBUG_BRCMSTB_UART default 0xfcfe8600 if DEBUG_UART_BCM63XX default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX @@ -1260,7 +1273,8 @@ config DEBUG_UART_8250_WORD ARCH_KEYSTONE || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ - DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 + DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ + DEBUG_BRCMSTB_UART config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" -- cgit v1.2.3 From 62639c2f5332a0f25b11806ddcfe1d95d3d635fb Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 5 Sep 2014 16:31:04 -0700 Subject: ARM: brcmstb: reintroduce SMP support Support for SMP bringup of the B15 CPUs on Broadcom STB chips was added in commit 4fbe66d9903425156c193ae44c81c0f7557755c4 but was reverted in commit fc3e825fa91636a5d1b992e769b2d8279877bfad to address some late review comments. This reintroduces SMP support. Signed-off-by: Marc Carino Signed-off-by: Brian Norris Signed-off-by: Florian Fainelli --- arch/arm/mach-bcm/Makefile | 2 + arch/arm/mach-bcm/brcmstb.h | 19 +++ arch/arm/mach-bcm/headsmp-brcmstb.S | 33 ++++ arch/arm/mach-bcm/platsmp-brcmstb.c | 329 ++++++++++++++++++++++++++++++++++++ 4 files changed, 383 insertions(+) create mode 100644 arch/arm/mach-bcm/brcmstb.h create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S create mode 100644 arch/arm/mach-bcm/platsmp-brcmstb.c (limited to 'arch') diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 300ae4b79ae6..6710ea321220 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -38,5 +38,7 @@ obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o ifeq ($(CONFIG_ARCH_BRCMSTB),y) +CFLAGS_platsmp-brcmstb.o += -march=armv7-a obj-y += brcmstb.o +obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o endif diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h new file mode 100644 index 000000000000..ec0c3d112b36 --- /dev/null +++ b/arch/arm/mach-bcm/brcmstb.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2013-2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __BRCMSTB_H__ +#define __BRCMSTB_H__ + +void brcmstb_secondary_startup(void); + +#endif /* __BRCMSTB_H__ */ diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S new file mode 100644 index 000000000000..199c1ea58248 --- /dev/null +++ b/arch/arm/mach-bcm/headsmp-brcmstb.S @@ -0,0 +1,33 @@ +/* + * SMP boot code for secondary CPUs + * Based on arch/arm/mach-tegra/headsmp.S + * + * Copyright (C) 2010 NVIDIA, Inc. + * Copyright (C) 2013-2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + + .section ".text.head", "ax" + +ENTRY(brcmstb_secondary_startup) + /* + * Ensure CPU is in a sane state by disabling all IRQs and switching + * into SVC mode. + */ + setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0 + + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(brcmstb_secondary_startup) diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c new file mode 100644 index 000000000000..31c87a284a34 --- /dev/null +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c @@ -0,0 +1,329 @@ +/* + * Broadcom STB CPU SMP and hotplug support for ARM + * + * Copyright (C) 2013-2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "brcmstb.h" + +enum { + ZONE_MAN_CLKEN_MASK = BIT(0), + ZONE_MAN_RESET_CNTL_MASK = BIT(1), + ZONE_MAN_MEM_PWR_MASK = BIT(4), + ZONE_RESERVED_1_MASK = BIT(5), + ZONE_MAN_ISO_CNTL_MASK = BIT(6), + ZONE_MANUAL_CONTROL_MASK = BIT(7), + ZONE_PWR_DN_REQ_MASK = BIT(9), + ZONE_PWR_UP_REQ_MASK = BIT(10), + ZONE_BLK_RST_ASSERT_MASK = BIT(12), + ZONE_PWR_OFF_STATE_MASK = BIT(25), + ZONE_PWR_ON_STATE_MASK = BIT(26), + ZONE_DPG_PWR_STATE_MASK = BIT(28), + ZONE_MEM_PWR_STATE_MASK = BIT(29), + ZONE_RESET_STATE_MASK = BIT(31), + CPU0_PWR_ZONE_CTRL_REG = 1, + CPU_RESET_CONFIG_REG = 2, +}; + +static void __iomem *cpubiuctrl_block; +static void __iomem *hif_cont_block; +static u32 cpu0_pwr_zone_ctrl_reg; +static u32 cpu_rst_cfg_reg; +static u32 hif_cont_reg; + +#ifdef CONFIG_HOTPLUG_CPU +/* + * We must quiesce a dying CPU before it can be killed by the boot CPU. Because + * one or more cache may be disabled, we must flush to ensure coherency. We + * cannot use traditionl completion structures or spinlocks as they rely on + * coherency. + */ +static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state); + +static int per_cpu_sw_state_rd(u32 cpu) +{ + sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); + return per_cpu(per_cpu_sw_state, cpu); +} + +static void per_cpu_sw_state_wr(u32 cpu, int val) +{ + dmb(); + per_cpu(per_cpu_sw_state, cpu) = val; + sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); +} +#else +static inline void per_cpu_sw_state_wr(u32 cpu, int val) { } +#endif + +static void __iomem *pwr_ctrl_get_base(u32 cpu) +{ + void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg; + base += (cpu_logical_map(cpu) * 4); + return base; +} + +static u32 pwr_ctrl_rd(u32 cpu) +{ + void __iomem *base = pwr_ctrl_get_base(cpu); + return readl_relaxed(base); +} + +static void pwr_ctrl_wr(u32 cpu, u32 val) +{ + void __iomem *base = pwr_ctrl_get_base(cpu); + writel(val, base); +} + +static void cpu_rst_cfg_set(u32 cpu, int set) +{ + u32 val; + val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg); + if (set) + val |= BIT(cpu_logical_map(cpu)); + else + val &= ~BIT(cpu_logical_map(cpu)); + writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg); +} + +static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr) +{ + const int reg_ofs = cpu_logical_map(cpu) * 8; + writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs); + writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs); +} + +static void brcmstb_cpu_boot(u32 cpu) +{ + /* Mark this CPU as "up" */ + per_cpu_sw_state_wr(cpu, 1); + + /* + * Set the reset vector to point to the secondary_startup + * routine + */ + cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup)); + + /* Unhalt the cpu */ + cpu_rst_cfg_set(cpu, 0); +} + +static void brcmstb_cpu_power_on(u32 cpu) +{ + /* + * The secondary cores power was cut, so we must go through + * power-on initialization. + */ + u32 tmp; + + /* Request zone power up */ + pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK); + + /* Wait for the power up FSM to complete */ + do { + tmp = pwr_ctrl_rd(cpu); + } while (!(tmp & ZONE_PWR_ON_STATE_MASK)); +} + +static int brcmstb_cpu_get_power_state(u32 cpu) +{ + int tmp = pwr_ctrl_rd(cpu); + return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1; +} + +#ifdef CONFIG_HOTPLUG_CPU + +static void brcmstb_cpu_die(u32 cpu) +{ + v7_exit_coherency_flush(all); + + per_cpu_sw_state_wr(cpu, 0); + + /* Sit and wait to die */ + wfi(); + + /* We should never get here... */ + while (1) + ; +} + +static int brcmstb_cpu_kill(u32 cpu) +{ + u32 tmp; + + while (per_cpu_sw_state_rd(cpu)) + ; + + /* Program zone reset */ + pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK | + ZONE_PWR_DN_REQ_MASK); + + /* Verify zone reset */ + tmp = pwr_ctrl_rd(cpu); + if (!(tmp & ZONE_RESET_STATE_MASK)) + pr_err("%s: Zone reset bit for CPU %d not asserted!\n", + __func__, cpu); + + /* Wait for power down */ + do { + tmp = pwr_ctrl_rd(cpu); + } while (!(tmp & ZONE_PWR_OFF_STATE_MASK)); + + /* Flush pipeline before resetting CPU */ + mb(); + + /* Assert reset on the CPU */ + cpu_rst_cfg_set(cpu, 1); + + return 1; +} + +#endif /* CONFIG_HOTPLUG_CPU */ + +static int __init setup_hifcpubiuctrl_regs(struct device_node *np) +{ + int rc = 0; + char *name; + struct device_node *syscon_np = NULL; + + name = "syscon-cpu"; + + syscon_np = of_parse_phandle(np, name, 0); + if (!syscon_np) { + pr_err("can't find phandle %s\n", name); + rc = -EINVAL; + goto cleanup; + } + + cpubiuctrl_block = of_iomap(syscon_np, 0); + if (!cpubiuctrl_block) { + pr_err("iomap failed for cpubiuctrl_block\n"); + rc = -EINVAL; + goto cleanup; + } + + rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG, + &cpu0_pwr_zone_ctrl_reg); + if (rc) { + pr_err("failed to read 1st entry from %s property (%d)\n", name, + rc); + rc = -EINVAL; + goto cleanup; + } + + rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG, + &cpu_rst_cfg_reg); + if (rc) { + pr_err("failed to read 2nd entry from %s property (%d)\n", name, + rc); + rc = -EINVAL; + goto cleanup; + } + +cleanup: + of_node_put(syscon_np); + return rc; +} + +static int __init setup_hifcont_regs(struct device_node *np) +{ + int rc = 0; + char *name; + struct device_node *syscon_np = NULL; + + name = "syscon-cont"; + + syscon_np = of_parse_phandle(np, name, 0); + if (!syscon_np) { + pr_err("can't find phandle %s\n", name); + rc = -EINVAL; + goto cleanup; + } + + hif_cont_block = of_iomap(syscon_np, 0); + if (!hif_cont_block) { + pr_err("iomap failed for hif_cont_block\n"); + rc = -EINVAL; + goto cleanup; + } + + /* Offset is at top of hif_cont_block */ + hif_cont_reg = 0; + +cleanup: + of_node_put(syscon_np); + return rc; +} + +static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) +{ + int rc; + struct device_node *np; + char *name; + + name = "brcm,brcmstb-smpboot"; + np = of_find_compatible_node(NULL, NULL, name); + if (!np) { + pr_err("can't find compatible node %s\n", name); + return; + } + + rc = setup_hifcpubiuctrl_regs(np); + if (rc) + return; + + rc = setup_hifcont_regs(np); + if (rc) + return; +} + +static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + /* Missing the brcm,brcmstb-smpboot DT node? */ + if (!cpubiuctrl_block || !hif_cont_block) + return -ENODEV; + + /* Bring up power to the core if necessary */ + if (brcmstb_cpu_get_power_state(cpu) == 0) + brcmstb_cpu_power_on(cpu); + + brcmstb_cpu_boot(cpu); + + return 0; +} + +static struct smp_operations brcmstb_smp_ops __initdata = { + .smp_prepare_cpus = brcmstb_cpu_ctrl_setup, + .smp_boot_secondary = brcmstb_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_kill = brcmstb_cpu_kill, + .cpu_die = brcmstb_cpu_die, +#endif +}; + +CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops); -- cgit v1.2.3 From 1aaaad3ffaec839929cc69992f419d656e18dc55 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 5 Sep 2014 16:25:37 -0700 Subject: ARM: brcmstb: Kconfig: drop unneeded symbol selections These are either implied or not necessary. Signed-off-by: Brian Norris Signed-off-by: Florian Fainelli --- arch/arm/mach-bcm/Kconfig | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 2abad742516d..9625dddb5cd3 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -118,10 +118,7 @@ config ARCH_BCM_63XX config ARCH_BRCMSTB bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7 - depends on MMU select ARM_GIC - select MIGHT_HAVE_PCI - select HAVE_SMP select HAVE_ARM_ARCH_TIMER select BRCMSTB_GISB_ARB select BRCMSTB_L2_IRQ -- cgit v1.2.3 From e9246c8726312aae36202b9e50c7e76a8609b712 Mon Sep 17 00:00:00 2001 From: Antoine Ténart Date: Wed, 3 Sep 2014 09:48:22 +0200 Subject: ARM: Berlin: select the reset controller MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Marvell Berlin SoCs now has a reset controller. Add the needed configuration. While at it reorder Kconfigs alphabetically. Signed-off-by: Antoine Ténart Signed-off-by: Sebastian Hesselbarth --- arch/arm/mach-berlin/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 24f85be71671..84d34e07209c 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,11 +1,13 @@ menuconfig ARCH_BERLIN bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 + select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB select ARM_GIC - select GENERIC_IRQ_CHIP select DW_APB_ICTL select DW_APB_TIMER_OF + select GENERIC_IRQ_CHIP select PINCTRL + select RESET_CONTROLLER if ARCH_BERLIN -- cgit v1.2.3 From 862f464a540554a28273b761b4ce72541dc75914 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Fri, 29 Aug 2014 14:17:02 +0200 Subject: dts, arm64: Add dtbs_install make target This adds the dtbs_install make target to arm64. The target has been introduced already to arch/arm with the following commit: f4d4ffc03efc kbuild: dtbs_install: new make target Implementation for arm64 is the same as for arm. With 'dtbs_install' all config enabled dtb files are installed to either the INSTALL_DTBS_PATH directory or the default location: $INSTALL_PATH/dtbs/$KERNELRELEASE Signed-off-by: Robert Richter --- arch/arm64/Makefile | 6 ++++-- arch/arm64/boot/dts/Makefile | 4 +++- 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 20901ffed182..a963b3a8fc34 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -70,8 +70,9 @@ zinstall install: vmlinux %.dtb: scripts $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ -dtbs: scripts - $(Q)$(MAKE) $(build)=$(boot)/dts dtbs +PHONY += dtbs dtbs_install +dtbs dtbs_install: prepare scripts + $(Q)$(MAKE) $(build)=$(boot)/dts $@ PHONY += vdso_install vdso_install: @@ -85,6 +86,7 @@ define archhelp echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)' echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' echo '* dtbs - Build device tree blobs for enabled boards' + echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)' echo ' install - Install uncompressed kernel' echo ' zinstall - Install compressed kernel' echo ' Install using (your) ~/bin/installkernel or' diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index f8001a62029c..3a75cdc2d087 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -2,9 +2,11 @@ dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb -targets += dtbs +targets += dtbs dtbs_install targets += $(dtb-y) dtbs: $(addprefix $(obj)/, $(dtb-y)) clean-files := *.dtb + +dtbs_install: $(addsuffix _dtbinst_, $(dtb-y)) -- cgit v1.2.3 From 9fb5e5372208973984a23ee6f5f025c05d364633 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 3 Sep 2014 15:29:24 +0200 Subject: dts, kbuild: Factor out dtbs install rules to Makefile.dtbinst Move dtbs install rules to Makefile.dtbinst. This change is needed to implement support for dts vendor subdirs. The change makes Makefiles easier and smaller as no longer the dtbs_install rule needs to be defined. Another advantage is that install goals are not encoded in targets anymore (%.dtb_dtbinst_). Signed-off-by: Robert Richter --- arch/arm/Makefile | 6 +++++- arch/arm/boot/dts/Makefile | 2 -- arch/arm64/Makefile | 6 +++++- arch/arm64/boot/dts/Makefile | 2 -- scripts/Kbuild.include | 6 ++++++ scripts/Makefile.dtbinst | 38 ++++++++++++++++++++++++++++++++++++++ scripts/Makefile.lib | 12 ------------ 7 files changed, 54 insertions(+), 18 deletions(-) create mode 100644 scripts/Makefile.dtbinst (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 034a94904d69..c81e0674e568 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -312,9 +312,13 @@ $(INSTALL_TARGETS): $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ PHONY += dtbs dtbs_install -dtbs dtbs_install: prepare scripts + +dtbs: prepare scripts $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $@ +dtbs_install: + $(Q)$(MAKE) $(dtbinst)=$(boot)/dts MACHINE=$(MACHINE) + # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..e0d348b4d1fa 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -527,5 +527,3 @@ dtbs: $(addprefix $(obj)/, $(dtb-y)) $(Q)rm -f $(obj)/../*.dtb clean-files := *.dtb - -dtbs_install: $(addsuffix _dtbinst_, $(dtb-y)) diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index a963b3a8fc34..8e9167a19b6b 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -71,9 +71,13 @@ zinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ PHONY += dtbs dtbs_install -dtbs dtbs_install: prepare scripts + +dtbs: prepare scripts $(Q)$(MAKE) $(build)=$(boot)/dts $@ +dtbs_install: + $(Q)$(MAKE) $(dtbinst)=$(boot)/dts + PHONY += vdso_install vdso_install: $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@ diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 3a75cdc2d087..29ac5adf50ae 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -8,5 +8,3 @@ targets += $(dtb-y) dtbs: $(addprefix $(obj)/, $(dtb-y)) clean-files := *.dtb - -dtbs_install: $(addsuffix _dtbinst_, $(dtb-y)) diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 65e7b08bb2cc..5374b1bdf02f 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -179,6 +179,12 @@ build := -f $(srctree)/scripts/Makefile.build obj # $(Q)$(MAKE) $(modbuiltin)=dir modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj +### +# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj= +# Usage: +# $(Q)$(MAKE) $(dtbinst)=dir +dtbinst := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.dtbinst obj + # Prefix -I with $(srctree) if it is not an absolute path. # skip if -I has no parameter addtree = $(if $(patsubst -I%,%,$(1)), \ diff --git a/scripts/Makefile.dtbinst b/scripts/Makefile.dtbinst new file mode 100644 index 000000000000..54286cccc289 --- /dev/null +++ b/scripts/Makefile.dtbinst @@ -0,0 +1,38 @@ +# ========================================================================== +# Installing dtb files +# +# Installs all dtb files listed in $(dtb-y) either in the +# INSTALL_DTBS_PATH directory or the default location: +# +# $INSTALL_PATH/dtbs/$KERNELRELEASE +# +# ========================================================================== + +src := $(obj) + +PHONY := __dtbs_install +__dtbs_install: + +include include/config/auto.conf +include scripts/Kbuild.include +include $(srctree)/$(obj)/Makefile + +PHONY += __dtbs_install_prep +__dtbs_install_prep: + $(Q)if [ -d $(INSTALL_DTBS_PATH).old ]; then rm -rf $(INSTALL_DTBS_PATH).old; fi + $(Q)if [ -d $(INSTALL_DTBS_PATH) ]; then mv $(INSTALL_DTBS_PATH) $(INSTALL_DTBS_PATH).old; fi + $(Q)mkdir -p $(INSTALL_DTBS_PATH) + +dtbinst-files := $(dtb-y) + +# Helper targets for Installing DTBs into the boot directory +quiet_cmd_dtb_install = INSTALL $< + cmd_dtb_install = cp $< $(2) + +$(dtbinst-files): %.dtb: $(obj)/%.dtb | __dtbs_install_prep + $(call cmd,dtb_install,$(INSTALL_DTBS_PATH)) + +PHONY += $(dtbinst-files) +__dtbs_install: $(dtbinst-files) + +.PHONY: $(PHONY) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 54be19a0fa51..511755200634 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -283,18 +283,6 @@ $(obj)/%.dtb: $(src)/%.dts FORCE dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) -# Helper targets for Installing DTBs into the boot directory -quiet_cmd_dtb_install = INSTALL $< - cmd_dtb_install = cp $< $(2) - -_dtbinst_pre_: - $(Q)if [ -d $(INSTALL_DTBS_PATH).old ]; then rm -rf $(INSTALL_DTBS_PATH).old; fi - $(Q)if [ -d $(INSTALL_DTBS_PATH) ]; then mv $(INSTALL_DTBS_PATH) $(INSTALL_DTBS_PATH).old; fi - $(Q)mkdir -p $(INSTALL_DTBS_PATH) - -%.dtb_dtbinst_: $(obj)/%.dtb _dtbinst_pre_ - $(call cmd,dtb_install,$(INSTALL_DTBS_PATH)) - # Bzip2 # --------------------------------------------------------------------------- -- cgit v1.2.3 From d38726c485d3fd6e9f2ebd1adaef0c3ead48a5ac Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 3 Sep 2014 15:54:55 +0200 Subject: dts, arm/arm64: Remove dtbs build rules in sub-makes Add dtb files to build targets and let kbuild handle them. Thus, special dtbs rules can be removed. This eases Makefiles and the implementation of the support of vendor dtb subdirectories. Signed-off-by: Robert Richter --- arch/arm/Makefile | 2 +- arch/arm/boot/dts/Makefile | 10 ++-------- arch/arm64/Makefile | 2 +- arch/arm64/boot/dts/Makefile | 8 ++------ 4 files changed, 6 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c81e0674e568..b61adfae29d1 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -314,7 +314,7 @@ $(INSTALL_TARGETS): PHONY += dtbs dtbs_install dtbs: prepare scripts - $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $@ + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs_install: $(Q)$(MAKE) $(dtbinst)=$(boot)/dts MACHINE=$(MACHINE) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e0d348b4d1fa..6e784fac5798 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -517,13 +517,7 @@ dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ dove-dove-db.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb -targets += dtbs dtbs_install -targets += $(dtb-y) endif -# *.dtb used to be generated in the directory above. Clean out the -# old build results so people don't accidentally use them. -dtbs: $(addprefix $(obj)/, $(dtb-y)) - $(Q)rm -f $(obj)/../*.dtb - -clean-files := *.dtb +always := $(dtb-y) +clean-files := *.dtb diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 8e9167a19b6b..1c43cec971b5 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -73,7 +73,7 @@ zinstall install: vmlinux PHONY += dtbs dtbs_install dtbs: prepare scripts - $(Q)$(MAKE) $(build)=$(boot)/dts $@ + $(Q)$(MAKE) $(build)=$(boot)/dts dtbs_install: $(Q)$(MAKE) $(dtbinst)=$(boot)/dts diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 29ac5adf50ae..aa28902c3582 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -2,9 +2,5 @@ dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb -targets += dtbs dtbs_install -targets += $(dtb-y) - -dtbs: $(addprefix $(obj)/, $(dtb-y)) - -clean-files := *.dtb +always := $(dtb-y) +clean-files := *.dtb -- cgit v1.2.3 From 323a028d39cd8df37b1c6a62ac04987647ae4b67 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 3 Sep 2014 16:17:02 +0200 Subject: dts, kbuild: Implement support for dtb vendor subdirs This patch adds support of vendor sub directories for dtb files. Subdirectories can be specified in $(dts-dirs). Kbuild traverses over all directories while building and installing dtb files. The directory tree is also reflected in the install path. Tested-by: Andrew Bresticker Signed-off-by: Robert Richter --- arch/arm64/boot/dts/Makefile | 1 + scripts/Makefile.dtbinst | 23 ++++++++++++++++++----- 2 files changed, 19 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index aa28902c3582..77130bdf14b4 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -3,4 +3,5 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb always := $(dtb-y) +subdir-y := $(dts-dirs) clean-files := *.dtb diff --git a/scripts/Makefile.dtbinst b/scripts/Makefile.dtbinst index 54286cccc289..909ed7a2ac61 100644 --- a/scripts/Makefile.dtbinst +++ b/scripts/Makefile.dtbinst @@ -6,6 +6,7 @@ # # $INSTALL_PATH/dtbs/$KERNELRELEASE # +# Traverse through subdirectories listed in $(dts-dirs). # ========================================================================== src := $(obj) @@ -13,26 +14,38 @@ src := $(obj) PHONY := __dtbs_install __dtbs_install: +export dtbinst-root ?= $(obj) + include include/config/auto.conf include scripts/Kbuild.include include $(srctree)/$(obj)/Makefile PHONY += __dtbs_install_prep __dtbs_install_prep: +ifeq ("$(dtbinst-root)", "$(obj)") $(Q)if [ -d $(INSTALL_DTBS_PATH).old ]; then rm -rf $(INSTALL_DTBS_PATH).old; fi $(Q)if [ -d $(INSTALL_DTBS_PATH) ]; then mv $(INSTALL_DTBS_PATH) $(INSTALL_DTBS_PATH).old; fi $(Q)mkdir -p $(INSTALL_DTBS_PATH) +endif dtbinst-files := $(dtb-y) +dtbinst-dirs := $(dts-dirs) # Helper targets for Installing DTBs into the boot directory quiet_cmd_dtb_install = INSTALL $< - cmd_dtb_install = cp $< $(2) + cmd_dtb_install = mkdir -p $(2); cp $< $(2) + +install-dir = $(patsubst $(dtbinst-root)%,$(INSTALL_DTBS_PATH)%,$(obj)) + +$(dtbinst-files) $(dtbinst-dirs): | __dtbs_install_prep + +$(dtbinst-files): %.dtb: $(obj)/%.dtb + $(call cmd,dtb_install,$(install-dir)) -$(dtbinst-files): %.dtb: $(obj)/%.dtb | __dtbs_install_prep - $(call cmd,dtb_install,$(INSTALL_DTBS_PATH)) +$(dtbinst-dirs): + $(Q)$(MAKE) $(dtbinst)=$(obj)/$@ -PHONY += $(dtbinst-files) -__dtbs_install: $(dtbinst-files) +PHONY += $(dtbinst-files) $(dtbinst-dirs) +__dtbs_install: $(dtbinst-files) $(dtbinst-dirs) .PHONY: $(PHONY) -- cgit v1.2.3 From ca5b34100c571658e605c5554aac374649593327 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 3 Sep 2014 16:35:00 +0200 Subject: dts, arm64: Move dts files to vendor subdirs Moving dts files to vendor subdirs. Acked-by: Rob Herring Acked-by: Catalin Marinas Signed-off-by: Robert Richter --- arch/arm64/boot/dts/Makefile | 6 +- arch/arm64/boot/dts/apm-mustang.dts | 50 -- arch/arm64/boot/dts/apm-storm.dtsi | 660 ----------------------- arch/arm64/boot/dts/apm/Makefile | 5 + arch/arm64/boot/dts/apm/apm-mustang.dts | 50 ++ arch/arm64/boot/dts/apm/apm-storm.dtsi | 660 +++++++++++++++++++++++ arch/arm64/boot/dts/arm/Makefile | 6 + arch/arm64/boot/dts/arm/foundation-v8.dts | 232 ++++++++ arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 159 ++++++ arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 240 +++++++++ arch/arm64/boot/dts/cavium/Makefile | 5 + arch/arm64/boot/dts/cavium/thunder-88xx.dts | 67 +++ arch/arm64/boot/dts/cavium/thunder-88xx.dtsi | 401 ++++++++++++++ arch/arm64/boot/dts/foundation-v8.dts | 232 -------- arch/arm64/boot/dts/rtsm_ve-aemv8a.dts | 159 ------ arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi | 240 --------- arch/arm64/boot/dts/thunder-88xx.dts | 67 --- arch/arm64/boot/dts/thunder-88xx.dtsi | 401 -------------- 18 files changed, 1828 insertions(+), 1812 deletions(-) delete mode 100644 arch/arm64/boot/dts/apm-mustang.dts delete mode 100644 arch/arm64/boot/dts/apm-storm.dtsi create mode 100644 arch/arm64/boot/dts/apm/Makefile create mode 100644 arch/arm64/boot/dts/apm/apm-mustang.dts create mode 100644 arch/arm64/boot/dts/apm/apm-storm.dtsi create mode 100644 arch/arm64/boot/dts/arm/Makefile create mode 100644 arch/arm64/boot/dts/arm/foundation-v8.dts create mode 100644 arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts create mode 100644 arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi create mode 100644 arch/arm64/boot/dts/cavium/Makefile create mode 100644 arch/arm64/boot/dts/cavium/thunder-88xx.dts create mode 100644 arch/arm64/boot/dts/cavium/thunder-88xx.dtsi delete mode 100644 arch/arm64/boot/dts/foundation-v8.dts delete mode 100644 arch/arm64/boot/dts/rtsm_ve-aemv8a.dts delete mode 100644 arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi delete mode 100644 arch/arm64/boot/dts/thunder-88xx.dts delete mode 100644 arch/arm64/boot/dts/thunder-88xx.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 77130bdf14b4..e8efc8ff3d58 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,6 +1,6 @@ -dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb -dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb -dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb +dts-dirs += apm +dts-dirs += arm +dts-dirs += cavium always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/apm-mustang.dts b/arch/arm64/boot/dts/apm-mustang.dts deleted file mode 100644 index 2e25de0800b9..000000000000 --- a/arch/arm64/boot/dts/apm-mustang.dts +++ /dev/null @@ -1,50 +0,0 @@ -/* - * dts file for AppliedMicro (APM) Mustang Board - * - * Copyright (C) 2013, Applied Micro Circuits Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/dts-v1/; - -/include/ "apm-storm.dtsi" - -/ { - model = "APM X-Gene Mustang board"; - compatible = "apm,mustang", "apm,xgene-storm"; - - chosen { }; - - memory { - device_type = "memory"; - reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */ - }; -}; - -&pcie0clk { - status = "ok"; -}; - -&pcie0 { - status = "ok"; -}; - -&serial0 { - status = "ok"; -}; - -&menet { - status = "ok"; -}; - -&sgenet0 { - status = "ok"; -}; - -&xgenet { - status = "ok"; -}; diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi deleted file mode 100644 index 295c72d52a1f..000000000000 --- a/arch/arm64/boot/dts/apm-storm.dtsi +++ /dev/null @@ -1,660 +0,0 @@ -/* - * dts file for AppliedMicro (APM) X-Gene Storm SOC - * - * Copyright (C) 2013, Applied Micro Circuits Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/ { - compatible = "apm,xgene-storm"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu@000 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x000>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@001 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x001>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@100 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@101 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@200 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x200>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@201 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x201>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@300 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x300>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@301 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x301>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - }; - - gic: interrupt-controller@78010000 { - compatible = "arm,cortex-a15-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x0 0x78010000 0x0 0x1000>, /* GIC Dist */ - <0x0 0x78020000 0x0 0x1000>, /* GIC CPU */ - <0x0 0x78040000 0x0 0x2000>, /* GIC VCPU Control */ - <0x0 0x78060000 0x0 0x2000>; /* GIC VCPU */ - interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */ - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 0 0xff01>, /* Secure Phys IRQ */ - <1 13 0xff01>, /* Non-secure Phys IRQ */ - <1 14 0xff01>, /* Virt IRQ */ - <1 15 0xff01>; /* Hyp IRQ */ - clock-frequency = <50000000>; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks { - #address-cells = <2>; - #size-cells = <2>; - ranges; - refclk: refclk { - compatible = "fixed-clock"; - #clock-cells = <1>; - clock-frequency = <100000000>; - clock-output-names = "refclk"; - }; - - pcppll: pcppll@17000100 { - compatible = "apm,xgene-pcppll-clock"; - #clock-cells = <1>; - clocks = <&refclk 0>; - clock-names = "pcppll"; - reg = <0x0 0x17000100 0x0 0x1000>; - clock-output-names = "pcppll"; - type = <0>; - }; - - socpll: socpll@17000120 { - compatible = "apm,xgene-socpll-clock"; - #clock-cells = <1>; - clocks = <&refclk 0>; - clock-names = "socpll"; - reg = <0x0 0x17000120 0x0 0x1000>; - clock-output-names = "socpll"; - type = <1>; - }; - - socplldiv2: socplldiv2 { - compatible = "fixed-factor-clock"; - #clock-cells = <1>; - clocks = <&socpll 0>; - clock-names = "socplldiv2"; - clock-mult = <1>; - clock-div = <2>; - clock-output-names = "socplldiv2"; - }; - - qmlclk: qmlclk { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - clock-names = "qmlclk"; - reg = <0x0 0x1703C000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "qmlclk"; - }; - - ethclk: ethclk { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - clock-names = "ethclk"; - reg = <0x0 0x17000000 0x0 0x1000>; - reg-names = "div-reg"; - divider-offset = <0x238>; - divider-width = <0x9>; - divider-shift = <0x0>; - clock-output-names = "ethclk"; - }; - - menetclk: menetclk { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <ðclk 0>; - reg = <0x0 0x1702C000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "menetclk"; - }; - - sge0clk: sge0clk@1f21c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f21c000 0x0 0x1000>; - reg-names = "csr-reg"; - csr-mask = <0x3>; - clock-output-names = "sge0clk"; - }; - - xge0clk: xge0clk@1f61c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f61c000 0x0 0x1000>; - reg-names = "csr-reg"; - csr-mask = <0x3>; - clock-output-names = "xge0clk"; - }; - - sataphy1clk: sataphy1clk@1f21c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f21c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "sataphy1clk"; - status = "disabled"; - csr-offset = <0x4>; - csr-mask = <0x00>; - enable-offset = <0x0>; - enable-mask = <0x06>; - }; - - sataphy2clk: sataphy1clk@1f22c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f22c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "sataphy2clk"; - status = "ok"; - csr-offset = <0x4>; - csr-mask = <0x3a>; - enable-offset = <0x0>; - enable-mask = <0x06>; - }; - - sataphy3clk: sataphy1clk@1f23c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f23c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "sataphy3clk"; - status = "ok"; - csr-offset = <0x4>; - csr-mask = <0x3a>; - enable-offset = <0x0>; - enable-mask = <0x06>; - }; - - sata01clk: sata01clk@1f21c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f21c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "sata01clk"; - csr-offset = <0x4>; - csr-mask = <0x05>; - enable-offset = <0x0>; - enable-mask = <0x39>; - }; - - sata23clk: sata23clk@1f22c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f22c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "sata23clk"; - csr-offset = <0x4>; - csr-mask = <0x05>; - enable-offset = <0x0>; - enable-mask = <0x39>; - }; - - sata45clk: sata45clk@1f23c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f23c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "sata45clk"; - csr-offset = <0x4>; - csr-mask = <0x05>; - enable-offset = <0x0>; - enable-mask = <0x39>; - }; - - rtcclk: rtcclk@17000000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x17000000 0x0 0x2000>; - reg-names = "csr-reg"; - csr-offset = <0xc>; - csr-mask = <0x2>; - enable-offset = <0x10>; - enable-mask = <0x2>; - clock-output-names = "rtcclk"; - }; - - rngpkaclk: rngpkaclk@17000000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x17000000 0x0 0x2000>; - reg-names = "csr-reg"; - csr-offset = <0xc>; - csr-mask = <0x10>; - enable-offset = <0x10>; - enable-mask = <0x10>; - clock-output-names = "rngpkaclk"; - }; - - pcie0clk: pcie0clk@1f2bc000 { - status = "disabled"; - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f2bc000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "pcie0clk"; - }; - - pcie1clk: pcie1clk@1f2cc000 { - status = "disabled"; - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f2cc000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "pcie1clk"; - }; - - pcie2clk: pcie2clk@1f2dc000 { - status = "disabled"; - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f2dc000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "pcie2clk"; - }; - - pcie3clk: pcie3clk@1f50c000 { - status = "disabled"; - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f50c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "pcie3clk"; - }; - - pcie4clk: pcie4clk@1f51c000 { - status = "disabled"; - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f51c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "pcie4clk"; - }; - }; - - pcie0: pcie@1f2b0000 { - status = "disabled"; - device_type = "pci"; - compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ - 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ - reg-names = "csr", "cfg"; - ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ - 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ - dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 - 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; - dma-coherent; - clocks = <&pcie0clk 0>; - }; - - pcie1: pcie@1f2c0000 { - status = "disabled"; - device_type = "pci"; - compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */ - 0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */ - reg-names = "csr", "cfg"; - ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */ - 0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */ - dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 - 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>; - dma-coherent; - clocks = <&pcie1clk 0>; - }; - - pcie2: pcie@1f2d0000 { - status = "disabled"; - device_type = "pci"; - compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */ - 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */ - reg-names = "csr", "cfg"; - ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000 /* io */ - 0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */ - dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 - 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>; - dma-coherent; - clocks = <&pcie2clk 0>; - }; - - pcie3: pcie@1f500000 { - status = "disabled"; - device_type = "pci"; - compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */ - 0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */ - reg-names = "csr", "cfg"; - ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000 /* io */ - 0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem */ - dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 - 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>; - dma-coherent; - clocks = <&pcie3clk 0>; - }; - - pcie4: pcie@1f510000 { - status = "disabled"; - device_type = "pci"; - compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */ - 0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */ - reg-names = "csr", "cfg"; - ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000 /* io */ - 0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */ - dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 - 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>; - dma-coherent; - clocks = <&pcie4clk 0>; - }; - - serial0: serial@1c020000 { - status = "disabled"; - device_type = "serial"; - compatible = "ns16550a"; - reg = <0 0x1c020000 0x0 0x1000>; - reg-shift = <2>; - clock-frequency = <10000000>; /* Updated by bootloader */ - interrupt-parent = <&gic>; - interrupts = <0x0 0x4c 0x4>; - }; - - serial1: serial@1c021000 { - status = "disabled"; - device_type = "serial"; - compatible = "ns16550a"; - reg = <0 0x1c021000 0x0 0x1000>; - reg-shift = <2>; - clock-frequency = <10000000>; /* Updated by bootloader */ - interrupt-parent = <&gic>; - interrupts = <0x0 0x4d 0x4>; - }; - - serial2: serial@1c022000 { - status = "disabled"; - device_type = "serial"; - compatible = "ns16550a"; - reg = <0 0x1c022000 0x0 0x1000>; - reg-shift = <2>; - clock-frequency = <10000000>; /* Updated by bootloader */ - interrupt-parent = <&gic>; - interrupts = <0x0 0x4e 0x4>; - }; - - serial3: serial@1c023000 { - status = "disabled"; - device_type = "serial"; - compatible = "ns16550a"; - reg = <0 0x1c023000 0x0 0x1000>; - reg-shift = <2>; - clock-frequency = <10000000>; /* Updated by bootloader */ - interrupt-parent = <&gic>; - interrupts = <0x0 0x4f 0x4>; - }; - - phy1: phy@1f21a000 { - compatible = "apm,xgene-phy"; - reg = <0x0 0x1f21a000 0x0 0x100>; - #phy-cells = <1>; - clocks = <&sataphy1clk 0>; - status = "disabled"; - apm,tx-boost-gain = <30 30 30 30 30 30>; - apm,tx-eye-tuning = <2 10 10 2 10 10>; - }; - - phy2: phy@1f22a000 { - compatible = "apm,xgene-phy"; - reg = <0x0 0x1f22a000 0x0 0x100>; - #phy-cells = <1>; - clocks = <&sataphy2clk 0>; - status = "ok"; - apm,tx-boost-gain = <30 30 30 30 30 30>; - apm,tx-eye-tuning = <1 10 10 2 10 10>; - }; - - phy3: phy@1f23a000 { - compatible = "apm,xgene-phy"; - reg = <0x0 0x1f23a000 0x0 0x100>; - #phy-cells = <1>; - clocks = <&sataphy3clk 0>; - status = "ok"; - apm,tx-boost-gain = <31 31 31 31 31 31>; - apm,tx-eye-tuning = <2 10 10 2 10 10>; - }; - - sata1: sata@1a000000 { - compatible = "apm,xgene-ahci"; - reg = <0x0 0x1a000000 0x0 0x1000>, - <0x0 0x1f210000 0x0 0x1000>, - <0x0 0x1f21d000 0x0 0x1000>, - <0x0 0x1f21e000 0x0 0x1000>, - <0x0 0x1f217000 0x0 0x1000>; - interrupts = <0x0 0x86 0x4>; - dma-coherent; - status = "disabled"; - clocks = <&sata01clk 0>; - phys = <&phy1 0>; - phy-names = "sata-phy"; - }; - - sata2: sata@1a400000 { - compatible = "apm,xgene-ahci"; - reg = <0x0 0x1a400000 0x0 0x1000>, - <0x0 0x1f220000 0x0 0x1000>, - <0x0 0x1f22d000 0x0 0x1000>, - <0x0 0x1f22e000 0x0 0x1000>, - <0x0 0x1f227000 0x0 0x1000>; - interrupts = <0x0 0x87 0x4>; - dma-coherent; - status = "ok"; - clocks = <&sata23clk 0>; - phys = <&phy2 0>; - phy-names = "sata-phy"; - }; - - sata3: sata@1a800000 { - compatible = "apm,xgene-ahci"; - reg = <0x0 0x1a800000 0x0 0x1000>, - <0x0 0x1f230000 0x0 0x1000>, - <0x0 0x1f23d000 0x0 0x1000>, - <0x0 0x1f23e000 0x0 0x1000>; - interrupts = <0x0 0x88 0x4>; - dma-coherent; - status = "ok"; - clocks = <&sata45clk 0>; - phys = <&phy3 0>; - phy-names = "sata-phy"; - }; - - rtc: rtc@10510000 { - compatible = "apm,xgene-rtc"; - reg = <0x0 0x10510000 0x0 0x400>; - interrupts = <0x0 0x46 0x4>; - #clock-cells = <1>; - clocks = <&rtcclk 0>; - }; - - menet: ethernet@17020000 { - compatible = "apm,xgene-enet"; - status = "disabled"; - reg = <0x0 0x17020000 0x0 0xd100>, - <0x0 0X17030000 0x0 0X400>, - <0x0 0X10000000 0x0 0X200>; - reg-names = "enet_csr", "ring_csr", "ring_cmd"; - interrupts = <0x0 0x3c 0x4>; - dma-coherent; - clocks = <&menetclk 0>; - /* mac address will be overwritten by the bootloader */ - local-mac-address = [00 00 00 00 00 00]; - phy-connection-type = "rgmii"; - phy-handle = <&menetphy>; - mdio { - compatible = "apm,xgene-mdio"; - #address-cells = <1>; - #size-cells = <0>; - menetphy: menetphy@3 { - compatible = "ethernet-phy-id001c.c915"; - reg = <0x3>; - }; - - }; - }; - - sgenet0: ethernet@1f210000 { - compatible = "apm,xgene-enet"; - status = "disabled"; - reg = <0x0 0x1f210000 0x0 0x10000>, - <0x0 0x1f200000 0x0 0X10000>, - <0x0 0x1B000000 0x0 0X20000>; - reg-names = "enet_csr", "ring_csr", "ring_cmd"; - interrupts = <0x0 0xA0 0x4>; - dma-coherent; - clocks = <&sge0clk 0>; - local-mac-address = [00 00 00 00 00 00]; - phy-connection-type = "sgmii"; - }; - - xgenet: ethernet@1f610000 { - compatible = "apm,xgene-enet"; - status = "disabled"; - reg = <0x0 0x1f610000 0x0 0xd100>, - <0x0 0x1f600000 0x0 0X400>, - <0x0 0x18000000 0x0 0X200>; - reg-names = "enet_csr", "ring_csr", "ring_cmd"; - interrupts = <0x0 0x60 0x4>; - dma-coherent; - clocks = <&xge0clk 0>; - /* mac address will be overwritten by the bootloader */ - local-mac-address = [00 00 00 00 00 00]; - phy-connection-type = "xgmii"; - }; - - rng: rng@10520000 { - compatible = "apm,xgene-rng"; - reg = <0x0 0x10520000 0x0 0x100>; - interrupts = <0x0 0x41 0x4>; - clocks = <&rngpkaclk 0>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/apm/Makefile b/arch/arm64/boot/dts/apm/Makefile new file mode 100644 index 000000000000..a2afabbc1717 --- /dev/null +++ b/arch/arm64/boot/dts/apm/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts new file mode 100644 index 000000000000..2e25de0800b9 --- /dev/null +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts @@ -0,0 +1,50 @@ +/* + * dts file for AppliedMicro (APM) Mustang Board + * + * Copyright (C) 2013, Applied Micro Circuits Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/dts-v1/; + +/include/ "apm-storm.dtsi" + +/ { + model = "APM X-Gene Mustang board"; + compatible = "apm,mustang", "apm,xgene-storm"; + + chosen { }; + + memory { + device_type = "memory"; + reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */ + }; +}; + +&pcie0clk { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; + +&serial0 { + status = "ok"; +}; + +&menet { + status = "ok"; +}; + +&sgenet0 { + status = "ok"; +}; + +&xgenet { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi new file mode 100644 index 000000000000..295c72d52a1f --- /dev/null +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -0,0 +1,660 @@ +/* + * dts file for AppliedMicro (APM) X-Gene Storm SOC + * + * Copyright (C) 2013, Applied Micro Circuits Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/ { + compatible = "apm,xgene-storm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@000 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x000>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@001 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x001>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@100 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@101 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@200 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@201 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x201>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@300 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x300>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@301 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x301>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + }; + + gic: interrupt-controller@78010000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x78010000 0x0 0x1000>, /* GIC Dist */ + <0x0 0x78020000 0x0 0x1000>, /* GIC CPU */ + <0x0 0x78040000 0x0 0x2000>, /* GIC VCPU Control */ + <0x0 0x78060000 0x0 0x2000>; /* GIC VCPU */ + interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */ + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 0 0xff01>, /* Secure Phys IRQ */ + <1 13 0xff01>, /* Non-secure Phys IRQ */ + <1 14 0xff01>, /* Virt IRQ */ + <1 15 0xff01>; /* Hyp IRQ */ + clock-frequency = <50000000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + refclk: refclk { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <100000000>; + clock-output-names = "refclk"; + }; + + pcppll: pcppll@17000100 { + compatible = "apm,xgene-pcppll-clock"; + #clock-cells = <1>; + clocks = <&refclk 0>; + clock-names = "pcppll"; + reg = <0x0 0x17000100 0x0 0x1000>; + clock-output-names = "pcppll"; + type = <0>; + }; + + socpll: socpll@17000120 { + compatible = "apm,xgene-socpll-clock"; + #clock-cells = <1>; + clocks = <&refclk 0>; + clock-names = "socpll"; + reg = <0x0 0x17000120 0x0 0x1000>; + clock-output-names = "socpll"; + type = <1>; + }; + + socplldiv2: socplldiv2 { + compatible = "fixed-factor-clock"; + #clock-cells = <1>; + clocks = <&socpll 0>; + clock-names = "socplldiv2"; + clock-mult = <1>; + clock-div = <2>; + clock-output-names = "socplldiv2"; + }; + + qmlclk: qmlclk { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + clock-names = "qmlclk"; + reg = <0x0 0x1703C000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "qmlclk"; + }; + + ethclk: ethclk { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + clock-names = "ethclk"; + reg = <0x0 0x17000000 0x0 0x1000>; + reg-names = "div-reg"; + divider-offset = <0x238>; + divider-width = <0x9>; + divider-shift = <0x0>; + clock-output-names = "ethclk"; + }; + + menetclk: menetclk { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <ðclk 0>; + reg = <0x0 0x1702C000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "menetclk"; + }; + + sge0clk: sge0clk@1f21c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f21c000 0x0 0x1000>; + reg-names = "csr-reg"; + csr-mask = <0x3>; + clock-output-names = "sge0clk"; + }; + + xge0clk: xge0clk@1f61c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f61c000 0x0 0x1000>; + reg-names = "csr-reg"; + csr-mask = <0x3>; + clock-output-names = "xge0clk"; + }; + + sataphy1clk: sataphy1clk@1f21c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f21c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sataphy1clk"; + status = "disabled"; + csr-offset = <0x4>; + csr-mask = <0x00>; + enable-offset = <0x0>; + enable-mask = <0x06>; + }; + + sataphy2clk: sataphy1clk@1f22c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f22c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sataphy2clk"; + status = "ok"; + csr-offset = <0x4>; + csr-mask = <0x3a>; + enable-offset = <0x0>; + enable-mask = <0x06>; + }; + + sataphy3clk: sataphy1clk@1f23c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f23c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sataphy3clk"; + status = "ok"; + csr-offset = <0x4>; + csr-mask = <0x3a>; + enable-offset = <0x0>; + enable-mask = <0x06>; + }; + + sata01clk: sata01clk@1f21c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f21c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sata01clk"; + csr-offset = <0x4>; + csr-mask = <0x05>; + enable-offset = <0x0>; + enable-mask = <0x39>; + }; + + sata23clk: sata23clk@1f22c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f22c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sata23clk"; + csr-offset = <0x4>; + csr-mask = <0x05>; + enable-offset = <0x0>; + enable-mask = <0x39>; + }; + + sata45clk: sata45clk@1f23c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f23c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sata45clk"; + csr-offset = <0x4>; + csr-mask = <0x05>; + enable-offset = <0x0>; + enable-mask = <0x39>; + }; + + rtcclk: rtcclk@17000000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg"; + csr-offset = <0xc>; + csr-mask = <0x2>; + enable-offset = <0x10>; + enable-mask = <0x2>; + clock-output-names = "rtcclk"; + }; + + rngpkaclk: rngpkaclk@17000000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg"; + csr-offset = <0xc>; + csr-mask = <0x10>; + enable-offset = <0x10>; + enable-mask = <0x10>; + clock-output-names = "rngpkaclk"; + }; + + pcie0clk: pcie0clk@1f2bc000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2bc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie0clk"; + }; + + pcie1clk: pcie1clk@1f2cc000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2cc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie1clk"; + }; + + pcie2clk: pcie2clk@1f2dc000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2dc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie2clk"; + }; + + pcie3clk: pcie3clk@1f50c000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f50c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie3clk"; + }; + + pcie4clk: pcie4clk@1f51c000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f51c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie4clk"; + }; + }; + + pcie0: pcie@1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ + 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + }; + + pcie1: pcie@1f2c0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */ + 0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>; + dma-coherent; + clocks = <&pcie1clk 0>; + }; + + pcie2: pcie@1f2d0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */ + 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000 /* io */ + 0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>; + dma-coherent; + clocks = <&pcie2clk 0>; + }; + + pcie3: pcie@1f500000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */ + 0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000 /* io */ + 0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>; + dma-coherent; + clocks = <&pcie3clk 0>; + }; + + pcie4: pcie@1f510000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */ + 0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000 /* io */ + 0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>; + dma-coherent; + clocks = <&pcie4clk 0>; + }; + + serial0: serial@1c020000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c020000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4c 0x4>; + }; + + serial1: serial@1c021000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c021000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4d 0x4>; + }; + + serial2: serial@1c022000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c022000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4e 0x4>; + }; + + serial3: serial@1c023000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c023000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4f 0x4>; + }; + + phy1: phy@1f21a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f21a000 0x0 0x100>; + #phy-cells = <1>; + clocks = <&sataphy1clk 0>; + status = "disabled"; + apm,tx-boost-gain = <30 30 30 30 30 30>; + apm,tx-eye-tuning = <2 10 10 2 10 10>; + }; + + phy2: phy@1f22a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f22a000 0x0 0x100>; + #phy-cells = <1>; + clocks = <&sataphy2clk 0>; + status = "ok"; + apm,tx-boost-gain = <30 30 30 30 30 30>; + apm,tx-eye-tuning = <1 10 10 2 10 10>; + }; + + phy3: phy@1f23a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f23a000 0x0 0x100>; + #phy-cells = <1>; + clocks = <&sataphy3clk 0>; + status = "ok"; + apm,tx-boost-gain = <31 31 31 31 31 31>; + apm,tx-eye-tuning = <2 10 10 2 10 10>; + }; + + sata1: sata@1a000000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a000000 0x0 0x1000>, + <0x0 0x1f210000 0x0 0x1000>, + <0x0 0x1f21d000 0x0 0x1000>, + <0x0 0x1f21e000 0x0 0x1000>, + <0x0 0x1f217000 0x0 0x1000>; + interrupts = <0x0 0x86 0x4>; + dma-coherent; + status = "disabled"; + clocks = <&sata01clk 0>; + phys = <&phy1 0>; + phy-names = "sata-phy"; + }; + + sata2: sata@1a400000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a400000 0x0 0x1000>, + <0x0 0x1f220000 0x0 0x1000>, + <0x0 0x1f22d000 0x0 0x1000>, + <0x0 0x1f22e000 0x0 0x1000>, + <0x0 0x1f227000 0x0 0x1000>; + interrupts = <0x0 0x87 0x4>; + dma-coherent; + status = "ok"; + clocks = <&sata23clk 0>; + phys = <&phy2 0>; + phy-names = "sata-phy"; + }; + + sata3: sata@1a800000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a800000 0x0 0x1000>, + <0x0 0x1f230000 0x0 0x1000>, + <0x0 0x1f23d000 0x0 0x1000>, + <0x0 0x1f23e000 0x0 0x1000>; + interrupts = <0x0 0x88 0x4>; + dma-coherent; + status = "ok"; + clocks = <&sata45clk 0>; + phys = <&phy3 0>; + phy-names = "sata-phy"; + }; + + rtc: rtc@10510000 { + compatible = "apm,xgene-rtc"; + reg = <0x0 0x10510000 0x0 0x400>; + interrupts = <0x0 0x46 0x4>; + #clock-cells = <1>; + clocks = <&rtcclk 0>; + }; + + menet: ethernet@17020000 { + compatible = "apm,xgene-enet"; + status = "disabled"; + reg = <0x0 0x17020000 0x0 0xd100>, + <0x0 0X17030000 0x0 0X400>, + <0x0 0X10000000 0x0 0X200>; + reg-names = "enet_csr", "ring_csr", "ring_cmd"; + interrupts = <0x0 0x3c 0x4>; + dma-coherent; + clocks = <&menetclk 0>; + /* mac address will be overwritten by the bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-connection-type = "rgmii"; + phy-handle = <&menetphy>; + mdio { + compatible = "apm,xgene-mdio"; + #address-cells = <1>; + #size-cells = <0>; + menetphy: menetphy@3 { + compatible = "ethernet-phy-id001c.c915"; + reg = <0x3>; + }; + + }; + }; + + sgenet0: ethernet@1f210000 { + compatible = "apm,xgene-enet"; + status = "disabled"; + reg = <0x0 0x1f210000 0x0 0x10000>, + <0x0 0x1f200000 0x0 0X10000>, + <0x0 0x1B000000 0x0 0X20000>; + reg-names = "enet_csr", "ring_csr", "ring_cmd"; + interrupts = <0x0 0xA0 0x4>; + dma-coherent; + clocks = <&sge0clk 0>; + local-mac-address = [00 00 00 00 00 00]; + phy-connection-type = "sgmii"; + }; + + xgenet: ethernet@1f610000 { + compatible = "apm,xgene-enet"; + status = "disabled"; + reg = <0x0 0x1f610000 0x0 0xd100>, + <0x0 0x1f600000 0x0 0X400>, + <0x0 0x18000000 0x0 0X200>; + reg-names = "enet_csr", "ring_csr", "ring_cmd"; + interrupts = <0x0 0x60 0x4>; + dma-coherent; + clocks = <&xge0clk 0>; + /* mac address will be overwritten by the bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-connection-type = "xgmii"; + }; + + rng: rng@10520000 { + compatible = "apm,xgene-rng"; + reg = <0x0 0x10520000 0x0 0x100>; + interrupts = <0x0 0x41 0x4>; + clocks = <&rngpkaclk 0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile new file mode 100644 index 000000000000..43d1404bb3c1 --- /dev/null +++ b/arch/arm64/boot/dts/arm/Makefile @@ -0,0 +1,6 @@ +dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts new file mode 100644 index 000000000000..4a060906809d --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8.dts @@ -0,0 +1,232 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS + */ + +/dts-v1/; + +/memreserve/ 0x80000000 0x00010000; + +/ { + model = "Foundation-v8A"; + compatible = "arm,foundation-aarch64", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>, + <0x00000008 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x2c001000 0 0x1000>, + <0x0 0x2c002000 0 0x1000>, + <0x0 0x2c004000 0 0x2000>, + <0x0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff01>, + <1 14 0xff01>, + <1 11 0xff01>, + <1 10 0xff01>; + clock-frequency = <100000000>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 60 4>, + <0 61 4>, + <0 62 4>, + <0 63 4>; + }; + + smb { + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + arm,v2m-memory-map = "rs1"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + ethernet@2,02000000 { + compatible = "smsc,lan91c111"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + virtio_block@0130000 { + compatible = "virtio,mmio"; + reg = <0x130000 0x200>; + interrupts = <42>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts new file mode 100644 index 000000000000..572005ea2217 --- /dev/null +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -0,0 +1,159 @@ +/* + * ARM Ltd. Fast Models + * + * Architecture Envelope Model (AEM) ARMv8-A + * ARMAEMv8AMPCT + * + * RTSM_VE_AEMv8A.lisa + */ + +/dts-v1/; + +/memreserve/ 0x80000000 0x00010000; + +/ { + model = "RTSM_VE_AEMv8A"; + compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>, + <0x00000008 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x2c001000 0 0x1000>, + <0x0 0x2c002000 0 0x1000>, + <0x0 0x2c004000 0 0x2000>, + <0x0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff01>, + <1 14 0xff01>, + <1 11 0xff01>, + <1 10 0xff01>; + clock-frequency = <100000000>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 60 4>, + <0 61 4>, + <0 62 4>, + <0 63 4>; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi new file mode 100644 index 000000000000..ac2cb2418025 --- /dev/null +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -0,0 +1,240 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * Motherboard component + * + * VEMotherBoard.lisa + */ + + motherboard { + arm,v2m-memory-map = "rs1"; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <4 0x00000000 0x04000000>; + bank-width = <4>; + }; + + vram@2,00000000 { + compatible = "arm,vexpress-vram"; + reg = <2 0x00000000 0x00800000>; + }; + + ethernet@2,02000000 { + compatible = "smsc,lan91c111"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_sysctl: sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + }; + + aaci@040000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + clocks = <&v2m_clk24mhz>; + clock-names = "apb_pclk"; + }; + + mmci@050000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "mclk", "apb_pclk"; + }; + + kmi@060000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi@070000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + wdt@0f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x1000>; + interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; + clock-names = "wdogclk", "apb_pclk"; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x1000>; + interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x1000>; + interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x1000>; + interrupts = <4>; + clocks = <&v2m_clk24mhz>; + clock-names = "apb_pclk"; + }; + + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupts = <14>; + clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; + clock-names = "clcdclk", "apb_pclk"; + }; + + virtio_block@0130000 { + compatible = "virtio,mmio"; + reg = <0x130000 0x200>; + interrupts = <42>; + }; + }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + v2m_oscclk1: osc@1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + reset@0 { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; + + muxfpga@0 { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown@0 { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot@0 { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; + + dvimode@0 { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; + }; + }; diff --git a/arch/arm64/boot/dts/cavium/Makefile b/arch/arm64/boot/dts/cavium/Makefile new file mode 100644 index 000000000000..e34f89ddabb2 --- /dev/null +++ b/arch/arm64/boot/dts/cavium/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dts b/arch/arm64/boot/dts/cavium/thunder-88xx.dts new file mode 100644 index 000000000000..800ba65991f7 --- /dev/null +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dts @@ -0,0 +1,67 @@ +/* + * Cavium Thunder DTS file - Thunder board description + * + * Copyright (C) 2014, Cavium Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "thunder-88xx.dtsi" + +/ { + model = "Cavium ThunderX CN88XX board"; + compatible = "cavium,thunder-88xx"; + + aliases { + serial0 = &uaa0; + serial1 = &uaa1; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x80000000>; + }; +}; diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi new file mode 100644 index 000000000000..d8c0bdc51882 --- /dev/null +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi @@ -0,0 +1,401 @@ +/* + * Cavium Thunder DTS file - Thunder SoC description + * + * Copyright (C) 2014, Cavium Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "cavium,thunder-88xx"; + interrupt-parent = <&gic0>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@000 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x000>; + enable-method = "psci"; + }; + cpu@001 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x001>; + enable-method = "psci"; + }; + cpu@002 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x002>; + enable-method = "psci"; + }; + cpu@003 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x003>; + enable-method = "psci"; + }; + cpu@004 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x004>; + enable-method = "psci"; + }; + cpu@005 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x005>; + enable-method = "psci"; + }; + cpu@006 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x006>; + enable-method = "psci"; + }; + cpu@007 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x007>; + enable-method = "psci"; + }; + cpu@008 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x008>; + enable-method = "psci"; + }; + cpu@009 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x009>; + enable-method = "psci"; + }; + cpu@00a { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00a>; + enable-method = "psci"; + }; + cpu@00b { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00b>; + enable-method = "psci"; + }; + cpu@00c { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00c>; + enable-method = "psci"; + }; + cpu@00d { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00d>; + enable-method = "psci"; + }; + cpu@00e { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00e>; + enable-method = "psci"; + }; + cpu@00f { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00f>; + enable-method = "psci"; + }; + cpu@100 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + cpu@101 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + }; + cpu@102 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x102>; + enable-method = "psci"; + }; + cpu@103 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x103>; + enable-method = "psci"; + }; + cpu@104 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x104>; + enable-method = "psci"; + }; + cpu@105 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x105>; + enable-method = "psci"; + }; + cpu@106 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x106>; + enable-method = "psci"; + }; + cpu@107 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x107>; + enable-method = "psci"; + }; + cpu@108 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x108>; + enable-method = "psci"; + }; + cpu@109 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x109>; + enable-method = "psci"; + }; + cpu@10a { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10a>; + enable-method = "psci"; + }; + cpu@10b { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10b>; + enable-method = "psci"; + }; + cpu@10c { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10c>; + enable-method = "psci"; + }; + cpu@10d { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10d>; + enable-method = "psci"; + }; + cpu@10e { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10e>; + enable-method = "psci"; + }; + cpu@10f { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10f>; + enable-method = "psci"; + }; + cpu@200 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "psci"; + }; + cpu@201 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x201>; + enable-method = "psci"; + }; + cpu@202 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x202>; + enable-method = "psci"; + }; + cpu@203 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x203>; + enable-method = "psci"; + }; + cpu@204 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x204>; + enable-method = "psci"; + }; + cpu@205 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x205>; + enable-method = "psci"; + }; + cpu@206 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x206>; + enable-method = "psci"; + }; + cpu@207 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x207>; + enable-method = "psci"; + }; + cpu@208 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x208>; + enable-method = "psci"; + }; + cpu@209 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x209>; + enable-method = "psci"; + }; + cpu@20a { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20a>; + enable-method = "psci"; + }; + cpu@20b { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20b>; + enable-method = "psci"; + }; + cpu@20c { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20c>; + enable-method = "psci"; + }; + cpu@20d { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20d>; + enable-method = "psci"; + }; + cpu@20e { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20e>; + enable-method = "psci"; + }; + cpu@20f { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20f>; + enable-method = "psci"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff01>, + <1 14 0xff01>, + <1 11 0xff01>, + <1 10 0xff01>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + refclk50mhz: refclk50mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "refclk50mhz"; + }; + + gic0: interrupt-controller@8010,00000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */ + <0x8010 0x80000000 0x0 0x600000>; /* GICR */ + interrupts = <1 9 0xf04>; + }; + + uaa0: serial@87e0,24000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x87e0 0x24000000 0x0 0x1000>; + interrupts = <1 21 4>; + clocks = <&refclk50mhz>; + clock-names = "apb_pclk"; + }; + + uaa1: serial@87e0,25000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x87e0 0x25000000 0x0 0x1000>; + interrupts = <1 22 4>; + clocks = <&refclk50mhz>; + clock-names = "apb_pclk"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/foundation-v8.dts b/arch/arm64/boot/dts/foundation-v8.dts deleted file mode 100644 index 4a060906809d..000000000000 --- a/arch/arm64/boot/dts/foundation-v8.dts +++ /dev/null @@ -1,232 +0,0 @@ -/* - * ARM Ltd. - * - * ARMv8 Foundation model DTS - */ - -/dts-v1/; - -/memreserve/ 0x80000000 0x00010000; - -/ { - model = "Foundation-v8A"; - compatible = "arm,foundation-aarch64", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - aliases { - serial0 = &v2m_serial0; - serial1 = &v2m_serial1; - serial2 = &v2m_serial2; - serial3 = &v2m_serial3; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - cpu@2 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - cpu@3 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x00000000 0x80000000 0 0x80000000>, - <0x00000008 0x80000000 0 0x80000000>; - }; - - gic: interrupt-controller@2c001000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x0 0x2c001000 0 0x1000>, - <0x0 0x2c002000 0 0x1000>, - <0x0 0x2c004000 0 0x2000>, - <0x0 0x2c006000 0 0x2000>; - interrupts = <1 9 0xf04>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 0xff01>, - <1 14 0xff01>, - <1 11 0xff01>, - <1 10 0xff01>; - clock-frequency = <100000000>; - }; - - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <0 60 4>, - <0 61 4>, - <0 62 4>, - <0 63 4>; - }; - - smb { - compatible = "arm,vexpress,v2m-p1", "simple-bus"; - arm,v2m-memory-map = "rs1"; - #address-cells = <2>; /* SMB chipselect number and offset */ - #size-cells = <1>; - - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; - - ethernet@2,02000000 { - compatible = "smsc,lan91c111"; - reg = <2 0x02000000 0x10000>; - interrupts = <15>; - }; - - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; - - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; - - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; - - iofpga@3,00000000 { - compatible = "arm,amba-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 3 0 0x200000>; - - v2m_sysreg: sysreg@010000 { - compatible = "arm,vexpress-sysreg"; - reg = <0x010000 0x1000>; - }; - - v2m_serial0: uart@090000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x090000 0x1000>; - interrupts = <5>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial1: uart@0a0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0a0000 0x1000>; - interrupts = <6>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial2: uart@0b0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0b0000 0x1000>; - interrupts = <7>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial3: uart@0c0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0c0000 0x1000>; - interrupts = <8>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - virtio_block@0130000 { - compatible = "virtio,mmio"; - reg = <0x130000 0x200>; - interrupts = <42>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts deleted file mode 100644 index 572005ea2217..000000000000 --- a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts +++ /dev/null @@ -1,159 +0,0 @@ -/* - * ARM Ltd. Fast Models - * - * Architecture Envelope Model (AEM) ARMv8-A - * ARMAEMv8AMPCT - * - * RTSM_VE_AEMv8A.lisa - */ - -/dts-v1/; - -/memreserve/ 0x80000000 0x00010000; - -/ { - model = "RTSM_VE_AEMv8A"; - compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - aliases { - serial0 = &v2m_serial0; - serial1 = &v2m_serial1; - serial2 = &v2m_serial2; - serial3 = &v2m_serial3; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - cpu@2 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - cpu@3 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x00000000 0x80000000 0 0x80000000>, - <0x00000008 0x80000000 0 0x80000000>; - }; - - gic: interrupt-controller@2c001000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x0 0x2c001000 0 0x1000>, - <0x0 0x2c002000 0 0x1000>, - <0x0 0x2c004000 0 0x2000>, - <0x0 0x2c006000 0 0x2000>; - interrupts = <1 9 0xf04>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 0xff01>, - <1 14 0xff01>, - <1 11 0xff01>, - <1 10 0xff01>; - clock-frequency = <100000000>; - }; - - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <0 60 4>, - <0 61 4>, - <0 62 4>, - <0 63 4>; - }; - - smb { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; - - /include/ "rtsm_ve-motherboard.dtsi" - }; -}; diff --git a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi deleted file mode 100644 index ac2cb2418025..000000000000 --- a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi +++ /dev/null @@ -1,240 +0,0 @@ -/* - * ARM Ltd. Fast Models - * - * Versatile Express (VE) system model - * Motherboard component - * - * VEMotherBoard.lisa - */ - - motherboard { - arm,v2m-memory-map = "rs1"; - compatible = "arm,vexpress,v2m-p1", "simple-bus"; - #address-cells = <2>; /* SMB chipselect number and offset */ - #size-cells = <1>; - #interrupt-cells = <1>; - ranges; - - flash@0,00000000 { - compatible = "arm,vexpress-flash", "cfi-flash"; - reg = <0 0x00000000 0x04000000>, - <4 0x00000000 0x04000000>; - bank-width = <4>; - }; - - vram@2,00000000 { - compatible = "arm,vexpress-vram"; - reg = <2 0x00000000 0x00800000>; - }; - - ethernet@2,02000000 { - compatible = "smsc,lan91c111"; - reg = <2 0x02000000 0x10000>; - interrupts = <15>; - }; - - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; - - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; - - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; - - iofpga@3,00000000 { - compatible = "arm,amba-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 3 0 0x200000>; - - v2m_sysreg: sysreg@010000 { - compatible = "arm,vexpress-sysreg"; - reg = <0x010000 0x1000>; - gpio-controller; - #gpio-cells = <2>; - }; - - v2m_sysctl: sysctl@020000 { - compatible = "arm,sp810", "arm,primecell"; - reg = <0x020000 0x1000>; - clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; - clock-names = "refclk", "timclk", "apb_pclk"; - #clock-cells = <1>; - clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; - }; - - aaci@040000 { - compatible = "arm,pl041", "arm,primecell"; - reg = <0x040000 0x1000>; - interrupts = <11>; - clocks = <&v2m_clk24mhz>; - clock-names = "apb_pclk"; - }; - - mmci@050000 { - compatible = "arm,pl180", "arm,primecell"; - reg = <0x050000 0x1000>; - interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; - max-frequency = <12000000>; - vmmc-supply = <&v2m_fixed_3v3>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "mclk", "apb_pclk"; - }; - - kmi@060000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x060000 0x1000>; - interrupts = <12>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; - - kmi@070000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x070000 0x1000>; - interrupts = <13>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; - - v2m_serial0: uart@090000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x090000 0x1000>; - interrupts = <5>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial1: uart@0a0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0a0000 0x1000>; - interrupts = <6>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial2: uart@0b0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0b0000 0x1000>; - interrupts = <7>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial3: uart@0c0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0c0000 0x1000>; - interrupts = <8>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - wdt@0f0000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x0f0000 0x1000>; - interrupts = <0>; - clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; - clock-names = "wdogclk", "apb_pclk"; - }; - - v2m_timer01: timer@110000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x110000 0x1000>; - interrupts = <2>; - clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; - - v2m_timer23: timer@120000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x120000 0x1000>; - interrupts = <3>; - clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; - - rtc@170000 { - compatible = "arm,pl031", "arm,primecell"; - reg = <0x170000 0x1000>; - interrupts = <4>; - clocks = <&v2m_clk24mhz>; - clock-names = "apb_pclk"; - }; - - clcd@1f0000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x1f0000 0x1000>; - interrupts = <14>; - clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; - clock-names = "clcdclk", "apb_pclk"; - }; - - virtio_block@0130000 { - compatible = "virtio,mmio"; - reg = <0x130000 0x200>; - interrupts = <42>; - }; - }; - - v2m_fixed_3v3: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - v2m_oscclk1: osc@1 { - /* CLCD clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 63500000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk1"; - }; - - reset@0 { - compatible = "arm,vexpress-reset"; - arm,vexpress-sysreg,func = <5 0>; - }; - - muxfpga@0 { - compatible = "arm,vexpress-muxfpga"; - arm,vexpress-sysreg,func = <7 0>; - }; - - shutdown@0 { - compatible = "arm,vexpress-shutdown"; - arm,vexpress-sysreg,func = <8 0>; - }; - - reboot@0 { - compatible = "arm,vexpress-reboot"; - arm,vexpress-sysreg,func = <9 0>; - }; - - dvimode@0 { - compatible = "arm,vexpress-dvimode"; - arm,vexpress-sysreg,func = <11 0>; - }; - }; - }; diff --git a/arch/arm64/boot/dts/thunder-88xx.dts b/arch/arm64/boot/dts/thunder-88xx.dts deleted file mode 100644 index 800ba65991f7..000000000000 --- a/arch/arm64/boot/dts/thunder-88xx.dts +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Cavium Thunder DTS file - Thunder board description - * - * Copyright (C) 2014, Cavium Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -/include/ "thunder-88xx.dtsi" - -/ { - model = "Cavium ThunderX CN88XX board"; - compatible = "cavium,thunder-88xx"; - - aliases { - serial0 = &uaa0; - serial1 = &uaa1; - }; - - memory@00000000 { - device_type = "memory"; - reg = <0x0 0x00000000 0x0 0x80000000>; - }; -}; diff --git a/arch/arm64/boot/dts/thunder-88xx.dtsi b/arch/arm64/boot/dts/thunder-88xx.dtsi deleted file mode 100644 index d8c0bdc51882..000000000000 --- a/arch/arm64/boot/dts/thunder-88xx.dtsi +++ /dev/null @@ -1,401 +0,0 @@ -/* - * Cavium Thunder DTS file - Thunder SoC description - * - * Copyright (C) 2014, Cavium Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/ { - compatible = "cavium,thunder-88xx"; - interrupt-parent = <&gic0>; - #address-cells = <2>; - #size-cells = <2>; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu@000 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x000>; - enable-method = "psci"; - }; - cpu@001 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x001>; - enable-method = "psci"; - }; - cpu@002 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x002>; - enable-method = "psci"; - }; - cpu@003 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x003>; - enable-method = "psci"; - }; - cpu@004 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x004>; - enable-method = "psci"; - }; - cpu@005 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x005>; - enable-method = "psci"; - }; - cpu@006 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x006>; - enable-method = "psci"; - }; - cpu@007 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x007>; - enable-method = "psci"; - }; - cpu@008 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x008>; - enable-method = "psci"; - }; - cpu@009 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x009>; - enable-method = "psci"; - }; - cpu@00a { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x00a>; - enable-method = "psci"; - }; - cpu@00b { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x00b>; - enable-method = "psci"; - }; - cpu@00c { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x00c>; - enable-method = "psci"; - }; - cpu@00d { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x00d>; - enable-method = "psci"; - }; - cpu@00e { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x00e>; - enable-method = "psci"; - }; - cpu@00f { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x00f>; - enable-method = "psci"; - }; - cpu@100 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x100>; - enable-method = "psci"; - }; - cpu@101 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x101>; - enable-method = "psci"; - }; - cpu@102 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x102>; - enable-method = "psci"; - }; - cpu@103 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x103>; - enable-method = "psci"; - }; - cpu@104 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x104>; - enable-method = "psci"; - }; - cpu@105 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x105>; - enable-method = "psci"; - }; - cpu@106 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x106>; - enable-method = "psci"; - }; - cpu@107 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x107>; - enable-method = "psci"; - }; - cpu@108 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x108>; - enable-method = "psci"; - }; - cpu@109 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x109>; - enable-method = "psci"; - }; - cpu@10a { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x10a>; - enable-method = "psci"; - }; - cpu@10b { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x10b>; - enable-method = "psci"; - }; - cpu@10c { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x10c>; - enable-method = "psci"; - }; - cpu@10d { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x10d>; - enable-method = "psci"; - }; - cpu@10e { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x10e>; - enable-method = "psci"; - }; - cpu@10f { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x10f>; - enable-method = "psci"; - }; - cpu@200 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x200>; - enable-method = "psci"; - }; - cpu@201 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x201>; - enable-method = "psci"; - }; - cpu@202 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x202>; - enable-method = "psci"; - }; - cpu@203 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x203>; - enable-method = "psci"; - }; - cpu@204 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x204>; - enable-method = "psci"; - }; - cpu@205 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x205>; - enable-method = "psci"; - }; - cpu@206 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x206>; - enable-method = "psci"; - }; - cpu@207 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x207>; - enable-method = "psci"; - }; - cpu@208 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x208>; - enable-method = "psci"; - }; - cpu@209 { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x209>; - enable-method = "psci"; - }; - cpu@20a { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x20a>; - enable-method = "psci"; - }; - cpu@20b { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x20b>; - enable-method = "psci"; - }; - cpu@20c { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x20c>; - enable-method = "psci"; - }; - cpu@20d { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x20d>; - enable-method = "psci"; - }; - cpu@20e { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x20e>; - enable-method = "psci"; - }; - cpu@20f { - device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; - reg = <0x0 0x20f>; - enable-method = "psci"; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 0xff01>, - <1 14 0xff01>, - <1 11 0xff01>, - <1 10 0xff01>; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - refclk50mhz: refclk50mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - clock-output-names = "refclk50mhz"; - }; - - gic0: interrupt-controller@8010,00000000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */ - <0x8010 0x80000000 0x0 0x600000>; /* GICR */ - interrupts = <1 9 0xf04>; - }; - - uaa0: serial@87e0,24000000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x87e0 0x24000000 0x0 0x1000>; - interrupts = <1 21 4>; - clocks = <&refclk50mhz>; - clock-names = "apb_pclk"; - }; - - uaa1: serial@87e0,25000000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x87e0 0x25000000 0x0 0x1000>; - interrupts = <1 22 4>; - clocks = <&refclk50mhz>; - clock-names = "apb_pclk"; - }; - }; -}; -- cgit v1.2.3 From 6f889d8ba125693778e05f0166b963cf08fed930 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 3 Sep 2014 17:07:23 +0200 Subject: dts, arm: Remove $(MACHINE) variable from dtbs make recipes The machine description is not needed to build dtb files. Signed-off-by: Robert Richter --- arch/arm/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index b61adfae29d1..c1785eec2cf7 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -314,10 +314,10 @@ $(INSTALL_TARGETS): PHONY += dtbs dtbs_install dtbs: prepare scripts - $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) + $(Q)$(MAKE) $(build)=$(boot)/dts dtbs_install: - $(Q)$(MAKE) $(dtbinst)=$(boot)/dts MACHINE=$(MACHINE) + $(Q)$(MAKE) $(dtbinst)=$(boot)/dts # We use MRPROPER_FILES and CLEAN_FILES now archclean: -- cgit v1.2.3 From 12bfa2854f849486935da89a4a3a021e777dc346 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sunxi: regulators: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai Acked-by: Hans de Goede --- arch/arm/boot/dts/sunxi-common-regulators.dtsi | 46 +++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index c9c5b10e03eb..fa69adfea7fc 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -3,12 +3,48 @@ * * Copyright 2014 - Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ / { -- cgit v1.2.3 From 27f38a77c004fdab95bd7a3a7540510b1f435d1e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: ba10: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 46 ++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 1763cc7ec023..f3f2974658e4 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From a762e5996536e777ef6adf2711adfca10eb9385c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: hackberry: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-hackberry.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 891ea446abae..efc116287e0f 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 4684f7db57a92c9035b70c1268125ec55886bd21 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: inet97fv2: Relicense the device tree under GPLv2/X11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: David Lanzendörfer Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 6b0c37812ade..3e25ee4d3248 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -3,12 +3,48 @@ * * David Lanzendörfer * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From b0946ca329eaaa42ecd36207c55aa2bd4925f133 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: mini xplus: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 46 ++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index b9ecce60f2e7..8b3f97470249 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 74e79cd5b343d6933c27b5cc5e238c061cd1d064 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun4i: olinuxino lime: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 46 +++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index d046d568f5a1..88cf1a531155 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 - Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From bc4c63c3207107d05114109a5b00750287f7e6c9 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun5i: olinuxino micro: Relicense the device tree under GPLv2/X11 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Emilio López Acked-by: Hans de Goede --- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 46 +++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index ea9519da5764..fe3c559ca6a8 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 6181a6072ba525dcf73522ce4ae23d73bdba13c9 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun5i: r7: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts | 46 ++++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 43a93762d4f2..1fa2916eafc2 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From e321f1a68026b7791606003ae0b175ab05d685ca Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun5i: olinuxino micro: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 48 +++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index fa44b026483b..916ee8bb826f 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -1,15 +1,49 @@ /* - * Copyright 2012 Maxime Ripard + * Copyright 2012 Maxime Ripard * Copyright 2013 Hans de Goede * - * Maxime Ripard + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From a38e422231dccd0a173c42ef40459af32553d44c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 17 Oct 2014 11:38:38 +0200 Subject: ARM: sun6i: colombus: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-colombus.dts | 46 ++++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 546cf6eff5c7..c36b4dc89c13 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 527ebf02d03645221cee742495cea719d7dc9c9a Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 17 Oct 2014 11:38:39 +0200 Subject: ARM: sun6i: hummingbird: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 46 +++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index f142065b3c1f..6e924d9d2912 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -3,12 +3,48 @@ * * Maxime Ripard * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 37ab5ab8ff84a0fdf9f008995d955e8aac9bec28 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun6i: m9: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Hans de Goede --- arch/arm/boot/dts/sun6i-a31-m9.dts | 46 +++++++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index bc6115da5ae1..c887be6cea3d 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 438989faa1d4496f9ab799ed378c6766eaa24fcb Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun7i: i12: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Carlo Caione Acked-by: Hans de Goede --- arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 46 +++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 6a67712d417a..f38bb1a6656c 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -1,12 +1,48 @@ /* * Copyright 2014 Hans de Goede * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From 2c4791cdfab5cd83efbe6ee1ba59c197d49fbcb8 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 2 Sep 2014 19:25:26 +0200 Subject: ARM: sun8i: q8h: Relicense the device tree under GPLv2/X11 The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 46 +++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index e9b8cca8dcc1..7f2117ce6985 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -3,12 +3,48 @@ * * Chen-Yu Tsai * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -- cgit v1.2.3 From ac399a971d4094afaf07828c9bdf7c715ba8d167 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 20 Oct 2014 22:10:30 +0800 Subject: ARM: dts: sun9i: Add basic clocks and reset controls Now that we have driver support for the basic clocks, add them to the dtsi and update existing peripherals. Also add reset controls to match. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 177 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 171 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 5e2ec4b71f5b..7bcab5685d0e 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -142,6 +142,135 @@ clock-frequency = <32768>; clock-output-names = "osc32k"; }; + + pll4: clk@0600000c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-pll4-clk"; + reg = <0x0600000c 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll4"; + }; + + pll12: clk@0600002c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-pll4-clk"; + reg = <0x0600002c 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll12"; + }; + + gt_clk: clk@0600005c { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-gt-clk"; + reg = <0x0600005c 0x4>; + clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "gt"; + }; + + ahb0: clk@06000060 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-ahb-clk"; + reg = <0x06000060 0x4>; + clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "ahb0"; + }; + + ahb1: clk@06000064 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-ahb-clk"; + reg = <0x06000064 0x4>; + clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "ahb1"; + }; + + ahb2: clk@06000068 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-ahb-clk"; + reg = <0x06000068 0x4>; + clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "ahb2"; + }; + + apb0: clk@06000070 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-apb0-clk"; + reg = <0x06000070 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "apb0"; + }; + + apb1: clk@06000074 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-apb1-clk"; + reg = <0x06000074 0x4>; + clocks = <&osc24M>, <&pll4>; + clock-output-names = "apb1"; + }; + + cci400_clk: clk@06000078 { + #clock-cells = <0>; + compatible = "allwinner,sun9i-a80-gt-clk"; + reg = <0x06000078 0x4>; + clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; + clock-output-names = "cci400"; + }; + + ahb0_gates: clk@06000580 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-ahb0-gates-clk"; + reg = <0x06000580 0x4>; + clocks = <&ahb0>; + clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu", + "ahb0_ss", "ahb0_sd", "ahb0_nand1", + "ahb0_nand0", "ahb0_sdram", + "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts", + "ahb0_spi0","ahb0_spi1", "ahb0_spi2", + "ahb0_spi3"; + }; + + ahb1_gates: clk@06000584 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-ahb1-gates-clk"; + reg = <0x06000584 0x4>; + clocks = <&ahb1>; + clock-output-names = "ahb1_usbotg", "ahb1_usbhci", + "ahb1_gmac", "ahb1_msgbox", + "ahb1_spinlock", "ahb1_hstimer", + "ahb1_dma"; + }; + + ahb2_gates: clk@06000588 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-ahb2-gates-clk"; + reg = <0x06000588 0x4>; + clocks = <&ahb2>; + clock-output-names = "ahb2_lcd0", "ahb2_lcd1", + "ahb2_edp", "ahb2_csi", "ahb2_hdmi", + "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi"; + }; + + apb0_gates: clk@06000590 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-apb0-gates-clk"; + reg = <0x06000590 0x4>; + clocks = <&apb0>; + clock-output-names = "apb0_spdif", "apb0_pio", + "apb0_ac97", "apb0_i2s0", "apb0_i2s1", + "apb0_lradc", "apb0_gpadc", "apb0_twd", + "apb0_cirtx"; + }; + + apb1_gates: clk@06000594 { + #clock-cells = <1>; + compatible = "allwinner,sun9i-a80-apb1-gates-clk"; + reg = <0x06000594 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_i2c0", "apb1_i2c1", + "apb1_i2c2", "apb1_i2c3", "apb1_i2c4", + "apb1_uart0", "apb1_uart1", + "apb1_uart2", "apb1_uart3", + "apb1_uart4", "apb1_uart5"; + }; }; soc { @@ -165,6 +294,36 @@ interrupts = <1 9 0xf04>; }; + ahb0_resets: reset@060005a0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005a0 0x4>; + }; + + ahb1_resets: reset@060005a4 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005a4 0x4>; + }; + + ahb2_resets: reset@060005a8 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005a8 0x4>; + }; + + apb0_resets: reset@060005b0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005b0 0x4>; + }; + + apb1_resets: reset@060005b4 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x060005b4 0x4>; + }; + timer@06000c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x06000c00 0xa0>; @@ -184,7 +343,8 @@ interrupts = <0 0 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 16>; + resets = <&apb1_resets 16>; status = "disabled"; }; @@ -194,7 +354,8 @@ interrupts = <0 1 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 17>; + resets = <&apb1_resets 17>; status = "disabled"; }; @@ -204,7 +365,8 @@ interrupts = <0 2 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 18>; + resets = <&apb1_resets 18>; status = "disabled"; }; @@ -214,7 +376,8 @@ interrupts = <0 3 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 19>; + resets = <&apb1_resets 19>; status = "disabled"; }; @@ -224,7 +387,8 @@ interrupts = <0 4 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 20>; + resets = <&apb1_resets 20>; status = "disabled"; }; @@ -234,7 +398,8 @@ interrupts = <0 5 4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&osc24M>; + clocks = <&apb1_gates 21>; + resets = <&apb1_resets 21>; status = "disabled"; }; -- cgit v1.2.3 From 68f3b875f7848f5304472184a4634148c5330cbd Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 22 May 2014 23:30:35 +0200 Subject: ARM: integrator: make the Integrator multiplatform This converts the ARM Integrator reference designs to be fully multiplatform. V4T, V5 and V6 multiplatform builds become possible after this patch. Signed-off-by: Linus Walleij --- arch/arm/Kconfig | 18 -------- arch/arm/mach-integrator/Kconfig | 18 ++++++++ arch/arm/mach-integrator/include/mach/uncompress.h | 48 ---------------------- 3 files changed, 18 insertions(+), 66 deletions(-) delete mode 100644 arch/arm/mach-integrator/include/mach/uncompress.h (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 89c4b5ccc68d..2075ebdccf5d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -320,24 +320,6 @@ config ARCH_MULTIPLATFORM select SPARSE_IRQ select USE_OF -config ARCH_INTEGRATOR - bool "ARM Ltd. Integrator family" - select ARM_AMBA - select ARM_PATCH_PHYS_VIRT if MMU - select AUTO_ZRELADDR - select COMMON_CLK - select COMMON_CLK_VERSATILE - select GENERIC_CLOCKEVENTS - select HAVE_TCM - select ICST - select MULTI_IRQ_HANDLER - select PLAT_VERSATILE - select SPARSE_IRQ - select USE_OF - select VERSATILE_FPGA_IRQ - help - Support for ARM's Integrator platform. - config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARCH_WANT_OPTIONAL_GPIOLIB diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index c455e974bbfe..aa7eb272e602 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -1,3 +1,21 @@ +config ARCH_INTEGRATOR + bool "ARM Ltd. Integrator family" if (ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6) + select ARM_AMBA + select ARM_PATCH_PHYS_VIRT if MMU + select AUTO_ZRELADDR + select COMMON_CLK + select COMMON_CLK_VERSATILE + select GENERIC_CLOCKEVENTS + select HAVE_TCM + select ICST + select MULTI_IRQ_HANDLER + select PLAT_VERSATILE + select SPARSE_IRQ + select USE_OF + select VERSATILE_FPGA_IRQ + help + Support for ARM's Integrator platform. + if ARCH_INTEGRATOR menu "Integrator Options" diff --git a/arch/arm/mach-integrator/include/mach/uncompress.h b/arch/arm/mach-integrator/include/mach/uncompress.h deleted file mode 100644 index 8f3cc9954c16..000000000000 --- a/arch/arm/mach-integrator/include/mach/uncompress.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define AMBA_UART_DR (*(volatile unsigned char *)0x16000000) -#define AMBA_UART_LCRH (*(volatile unsigned char *)0x16000008) -#define AMBA_UART_LCRM (*(volatile unsigned char *)0x1600000c) -#define AMBA_UART_LCRL (*(volatile unsigned char *)0x16000010) -#define AMBA_UART_CR (*(volatile unsigned char *)0x16000014) -#define AMBA_UART_FR (*(volatile unsigned char *)0x16000018) - -/* - * This does not append a newline - */ -static void putc(int c) -{ - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = c; -} - -static inline void flush(void) -{ - while (AMBA_UART_FR & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -- cgit v1.2.3 From 9713497b6c64c67c8763f8f07fad325b193764b6 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 27 Jun 2014 10:44:14 +0200 Subject: ARM: integrator: set V4T and V5 as default multitargets When switching the Integrator machines to multiplatform, the V7 target becomes default, but most Integrators are V4T or V5, so set these two as default in the defconfig and deselect V7. Signed-off-by: Linus Walleij --- arch/arm/configs/integrator_defconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index c1f5adc5493e..71f14675d009 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -8,6 +8,9 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_MULTI_V4T=y +CONFIG_ARCH_MULTI_V5=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_ARCH_INTEGRATOR_CP=y -- cgit v1.2.3 From fa6e2eec15a58ce6a47ad7e8a3ccf3ef917cca35 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 1 Oct 2014 09:29:22 +0200 Subject: ARM: realview: basic device tree implementation This implements basic device tree boot support for the RealView platforms, with a basic device tree for ARM PB1176 as an example. The implementation is done with a new DT-specific board file using only pre-existing bindings for the basic IRQ, timer and serial port drivers. A new compatible type is added to the GIC for the ARM1176. This implementation uses the MFD syscon handle from day one to access the system controller registers, and register the devices using the SoC bus. Cc: Arnd Bergmann Cc: Rob Herring Acked-by: Jason Cooper Signed-off-by: Linus Walleij --- arch/arm/mach-realview/Kconfig | 13 +++++++++++++ arch/arm/mach-realview/Makefile | 1 + arch/arm/mach-realview/realview-dt.c | 32 ++++++++++++++++++++++++++++++++ drivers/irqchip/irq-gic.c | 2 ++ 4 files changed, 48 insertions(+) create mode 100644 arch/arm/mach-realview/realview-dt.c (limited to 'arch') diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 9db2029aa632..565925f37dc5 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -1,6 +1,19 @@ menu "RealView platform type" depends on ARCH_REALVIEW +config REALVIEW_DT + bool "Support RealView(R) Device Tree based boot" + select ARM_GIC + select MFD_SYSCON + select POWER_RESET + select POWER_RESET_VERSATILE + select POWER_SUPPLY + select SOC_REALVIEW + select USE_OF + help + Include support for booting the ARM(R) RealView(R) evaluation + boards using a device tree machine description. + config MACH_REALVIEW_EB bool "Support RealView(R) Emulation Baseboard" select ARM_GIC diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index 541fa4c109ef..e07fdf7ae8a7 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -3,6 +3,7 @@ # obj-y := core.o +obj-$(CONFIG_REALVIEW_DT) += realview-dt.o obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o diff --git a/arch/arm/mach-realview/realview-dt.c b/arch/arm/mach-realview/realview-dt.c new file mode 100644 index 000000000000..cc28b89dd48f --- /dev/null +++ b/arch/arm/mach-realview/realview-dt.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2014 Linaro Ltd. + * + * Author: Linus Walleij + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include "core.h" + +static const char *realview_dt_platform_compat[] __initconst = { + "arm,realview-eb", + "arm,realview-pb1176", + "arm,realview-pb11mp", + "arm,realview-pba8", + "arm,realview-pbx", + NULL, +}; + +DT_MACHINE_START(REALVIEW_DT, "ARM RealView Machine (Device Tree Support)") +#ifdef CONFIG_ZONE_DMA + .dma_zone_size = SZ_256M, +#endif + .dt_compat = realview_dt_platform_compat, + .l2c_aux_val = 0x0, + .l2c_aux_mask = ~0x0, +MACHINE_END diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 38493ff28fa5..7f9be0785c6a 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -1041,6 +1041,8 @@ gic_of_init(struct device_node *node, struct device_node *parent) return 0; } IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init); +IRQCHIP_DECLARE(arm11mp_gic, "arm,arm11mp-gic", gic_of_init); +IRQCHIP_DECLARE(arm1176jzf_dc_gic, "arm,arm1176jzf-devchip-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init); IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init); -- cgit v1.2.3 From f123a66cbdc47e31bcb11b59f935bed89343a8ed Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 1 Oct 2014 09:30:45 +0200 Subject: ARM: realview: add device tree and bindings for PB1176 As a first example, add device tree and bindings for the RealView PB1176. Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/arm/arm-boards | 65 ++++++ Documentation/devicetree/bindings/arm/gic.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/arm-realview-pb1176.dts | 247 +++++++++++++++++++++++ 4 files changed, 314 insertions(+) create mode 100644 arch/arm/boot/dts/arm-realview-pb1176.dts (limited to 'arch') diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index c554ed3d44fb..556c8665fdbf 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -92,3 +92,68 @@ Required nodes: - core-module: the root node to the Versatile platforms must have a core-module with regs and the compatible strings "arm,core-module-versatile", "syscon" + +ARM RealView Boards +------------------- +The RealView boards cover tailored evaluation boards that are used to explore +the ARM11 and Cortex A-8 and Cortex A-9 processors. + +Required properties (in root node): + /* RealView Emulation Baseboard */ + compatible = "arm,realview-eb"; + /* RealView Platform Baseboard for ARM1176JZF-S */ + compatible = "arm,realview-pb1176"; + /* RealView Platform Baseboard for ARM11 MPCore */ + compatible = "arm,realview-pb11mp"; + /* RealView Platform Baseboard for Cortex A-8 */ + compatible = "arm,realview-pba8"; + /* RealView Platform Baseboard Explore for Cortex A-9 */ + compatible = "arm,realview-pbx"; + +Required nodes: + +- soc: some node of the RealView platforms must be the SoC + node that contain the SoC-specific devices, withe the compatible + string set to one of these tuples: + "arm,realview-eb-soc", "simple-bus" + "arm,realview-pb1176-soc", "simple-bus" + "arm,realview-pb11mp-soc", "simple-bus" + "arm,realview-pba8-soc", "simple-bus" + "arm,realview-pbx-soc", "simple-bus" + +- syscon: some subnode of the RealView SoC node must be a + system controller node pointing to the control registers, + with the compatible string set to one of these tuples: + "arm,realview-eb-syscon", "syscon" + "arm,realview-pb1176-syscon", "syscon" + "arm,realview-pb11mp-syscon", "syscon" + "arm,realview-pba8-syscon", "syscon" + "arm,realview-pbx-syscon", "syscon" + + Required properties for the system controller: + - regs: the location and size of the system controller registers, + one range of 0x1000 bytes. + +Example: + +/dts-v1/; +#include +#include "skeleton.dtsi" + +/ { + model = "ARM RealView PB1176 with device tree"; + compatible = "arm,realview-pb1176"; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,realview-pb1176-soc", "simple-bus"; + ranges; + + syscon: syscon@10000000 { + compatible = "arm,realview-syscon", "syscon"; + reg = <0x10000000 0x1000>; + }; + + }; +}; diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index c7d2fa156678..b38608af66db 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -17,6 +17,7 @@ Main node required properties: "arm,cortex-a7-gic" "arm,arm11mp-gic" "brcm,brahma-b15-gic" + "arm,arm1176jzf-devchip-gic" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. The type shall be a and the value shall be 3. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..ab4435a59cd1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -363,6 +363,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-sony-xperia-honami.dtb +dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-bqcurie2.dtb \ rk3188-radxarock.dtb \ diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts new file mode 100644 index 000000000000..3135939cd13f --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -0,0 +1,247 @@ +/* + * Copyright 2014 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include +#include "skeleton.dtsi" + +/ { + model = "ARM RealView PB1176"; + compatible = "arm,realview-pb1176"; + + chosen { }; + + aliases { + serial0 = &pb1176_serial0; + serial1 = &pb1176_serial1; + serial2 = &pb1176_serial2; + serial3 = &pb1176_serial3; + }; + + memory { + /* 128 MiB memory @ 0x0 */ + reg = <0x00000000 0x08000000>; + }; + + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + uartclk: uartclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + /* FIXME: this actually hangs off the PLL clocks */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,realview-pb1176-soc", "simple-bus"; + regmap = <&syscon>; + ranges; + + syscon: syscon@10000000 { + compatible = "arm,realview-pb1176-syscon", "syscon"; + reg = <0x10000000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "versatile:3"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "versatile:4"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "versatile:5"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "versatile:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "versatile:7"; + default-state = "off"; + }; + }; + + /* Primary DevChip GIC synthesized with the CPU */ + intc_dc1176: interrupt-controller@10120000 { + compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x10121000 0x1000>, + <0x10120000 0x100>; + }; + + /* This GIC on the board is cascaded off the DevChip GIC */ + intc_pb1176: interrupt-controller@10040000 { + compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x10041000 0x1000>, + <0x10040000 0x100>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + }; + + L2: l2-cache { + compatible = "arm,l220-cache"; + reg = <0x10110000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + /* + * Override default cache size, sets and + * associativity as these may be erroneously set + * up by boot loader(s). + */ + arm,override-auxreg; + cache-size = <131072>; // 128kB + cache-sets = <512>; + cache-line-size = <32>; + }; + + pmu { + compatible = "arm,arm1176-pmu"; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer01: timer@10104000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10104000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer23: timer@10105000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10105000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + arm,sp804-has-irq = <1>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + pb1176_serial0: serial@1010c000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1010c000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + pb1176_serial1: serial@1010d000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1010d000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + pb1176_serial2: serial@1010e000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1010e000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + pb1176_serial3: serial@1010f000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1010f000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + }; +}; -- cgit v1.2.3 From c7eb3f4a1bf59ec10e54bcb74b4ce2150f2b5615 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 8 Oct 2014 15:26:52 +0200 Subject: ARM: realview: move DT GIC to FPGA node This creates a node in the device tree to hold the FPGA devices as a "simple-bus" and moves the GIC found on the FPGA to this node, so it reflects the actual topology of the system. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 32 +++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 3135939cd13f..f780adde2332 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -153,18 +153,6 @@ <0x10120000 0x100>; }; - /* This GIC on the board is cascaded off the DevChip GIC */ - intc_pb1176: interrupt-controller@10040000 { - compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; - #interrupt-cells = <3>; - #address-cells = <1>; - interrupt-controller; - reg = <0x10041000 0x1000>, - <0x10040000 0x100>; - interrupt-parent = <&intc_dc1176>; - interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; - }; - L2: l2-cache { compatible = "arm,l220-cache"; reg = <0x10110000 0x1000>; @@ -244,4 +232,24 @@ clock-names = "uartclk", "apb_pclk"; }; }; + + /* These peripherals are inside the FPGA rather than the DevChip */ + fpga { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + /* This GIC on the board is cascaded off the DevChip GIC */ + intc_fpga1176: interrupt-controller@10040000 { + compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x10041000 0x1000>, + <0x10040000 0x100>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + }; + }; }; -- cgit v1.2.3 From 75fd1324f91a87655993b52493f2e868b081414b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 8 Oct 2014 15:15:17 +0200 Subject: ARM: realview: add PL061 GPIO to the PB1176 DTS This adds the PL061 GPIO instances found on the PB1176 devchip and the FPGA to the DTS file. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 39 +++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index f780adde2332..4721244a16d6 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -196,6 +196,19 @@ clock-names = "timer1", "timer2", "apb_pclk"; }; + pb1176_gpio0: gpio@1010a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x1010a000 0x1000>; + gpio-controller; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + pb1176_serial0: serial@1010c000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x1010c000 0x1000>; @@ -251,5 +264,31 @@ interrupt-parent = <&intc_dc1176>; interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; }; + + fpga_gpio0: gpio@10014000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10014000 0x1000>; + gpio-controller; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + fpga_gpio1: gpio@10015000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10015000 0x1000>; + gpio-controller; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; }; }; -- cgit v1.2.3 From ad38a34dc671fc3790d2a394e4cf146eb3afbd13 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 10 Oct 2014 11:20:49 +0200 Subject: ARM: realview: add charlcd to PB1176 device tree Extend the PB1176 device tree with the character LCD device. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 4721244a16d6..4ca486796f71 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -253,6 +253,15 @@ compatible = "simple-bus"; ranges; + fpga_charlcd: charlcd@10008000 { + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + /* This GIC on the board is cascaded off the DevChip GIC */ intc_fpga1176: interrupt-controller@10040000 { compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; -- cgit v1.2.3 From 383caed2e54849e94568a00bbc94db217ccc03ce Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 10 Oct 2014 14:26:06 +0200 Subject: ARM: realview: add RTC clocks to device tree The PB1176 has two PL031 RTC clocks, one in the devchip and one in the FPGA. Add them to the device tree. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 4ca486796f71..0e5b608ab9db 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -196,6 +196,15 @@ clock-names = "timer1", "timer2", "apb_pclk"; }; + pb1176_rtc: rtc@10108000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10108000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + pb1176_gpio0: gpio@1010a000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x1010a000 0x1000>; @@ -299,5 +308,14 @@ clocks = <&pclk>; clock-names = "apb_pclk"; }; + + fpga_rtc: rtc@10017000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10017000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; }; }; -- cgit v1.2.3 From 24ec3ff329b99427cd2b42d0da3f9e3a6b91dae7 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 10 Oct 2014 15:07:55 +0200 Subject: ARM: realview: add PL022 SSP/SPI block to PB1176 DTS Add the PL022 SSP/SPI block to the PL1176 DTS file, also define the separate SSPCLK clock derived from the 24MHz chrystal. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 0e5b608ab9db..313a71756a18 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -56,6 +56,14 @@ clocks = <&xtal24mhz>; }; + sspclk: sspclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + uartclk: uartclk@24M { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -218,6 +226,15 @@ clock-names = "apb_pclk"; }; + pb1176_ssp: ssp@1010b000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x1010b000 0x1000>; + interrupt-parent = <&intc_dc1176>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sspclk>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; + }; + pb1176_serial0: serial@1010c000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x1010c000 0x1000>; -- cgit v1.2.3 From 7f9ac7dafe1dd99f8b920a40d03f8c231e4da426 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 10 Oct 2014 15:11:31 +0200 Subject: ARM: realview: add FPGA UART4 to PB1176 DTS This adds the UART4 found on the FPGA to the PB1176 DTS file. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 313a71756a18..ac4c1c850db2 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -35,6 +35,7 @@ serial1 = &pb1176_serial1; serial2 = &pb1176_serial2; serial3 = &pb1176_serial3; + serial4 = &fpga_serial; }; memory { @@ -288,6 +289,15 @@ clock-names = "apb_pclk"; }; + fpga_serial: serial@10009000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x10009000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + /* This GIC on the board is cascaded off the DevChip GIC */ intc_fpga1176: interrupt-controller@10040000 { compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; @@ -334,5 +344,7 @@ clocks = <&pclk>; clock-names = "apb_pclk"; }; + + }; }; -- cgit v1.2.3 From 7406c3957f28aa6528f2d58d638f4f5a306b6122 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 10 Oct 2014 15:21:02 +0200 Subject: ARM: realview: add KMIs to the PB1176 DTS This adds the Keyboard Mouse Interface (KMI) blocks to the PB1176 DTS file, and defines the special KMI clock derived from the 24 MHz chrystal. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index ac4c1c850db2..c292295ac1e3 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -57,6 +57,14 @@ clocks = <&xtal24mhz>; }; + kmiclk: kmiclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + sspclk: sspclk@24M { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -280,6 +288,24 @@ compatible = "simple-bus"; ranges; + fpga_kmi0: kmi@10006000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10006000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + fpga_kmi1: kmi@10007000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10007000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + fpga_charlcd: charlcd@10008000 { compatible = "arm,versatile-lcd"; reg = <0x10008000 0x1000>; -- cgit v1.2.3 From 10d8ddee10b886e4aec0d3e44a73cfa7c35e72e0 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 13 Oct 2014 13:21:40 +0200 Subject: ARM: realview: add MMCI to the PB1176 DTS This adds the MMC/SD card reader (MMCI) block to the RealView PB1176 DTS file. Add a special MCLK derived clock and a fixed regulator to represent the 3.3V rail hardwired to the MMC reader on the board. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-pb1176.dts | 36 +++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index c292295ac1e3..ff26c7ed8c41 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -22,6 +22,7 @@ /dts-v1/; #include +#include #include "skeleton.dtsi" / { @@ -43,6 +44,15 @@ reg = <0x00000000 0x08000000>; }; + /* The voltage to the MMC card is hardwired at 3.3V */ + vmmc: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + xtal24mhz: xtal24mhz@24M { #clock-cells = <0>; compatible = "fixed-clock"; @@ -57,6 +67,14 @@ clocks = <&xtal24mhz>; }; + mclk: mclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + kmiclk: kmiclk@24M { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -288,6 +306,24 @@ compatible = "simple-bus"; ranges; + fpga_mci: mmcsd@10005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x10005000 0x1000>; + interrupt-parent = <&intc_fpga1176>; + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>; + /* Due to frequent FIFO overruns, use just 500 kHz */ + max-frequency = <500000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + clocks = <&mclk>, <&pclk>; + clock-names = "mclk", "apb_pclk"; + vmmc-supply = <&vmmc>; + cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>; + }; + fpga_kmi0: kmi@10006000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x10006000 0x1000>; -- cgit v1.2.3 From 383d3f3e979bfbace3101dacb21387806b44e847 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 23 Sep 2014 10:08:50 +0200 Subject: ARM: shmobile: Remove ARCH_HAS_OPP completely The Kconfig symbol ARCH_HAS_OPP became redundant in v3.16: commit 049d595a4db3 ("PM / OPP: Make OPP invisible to users in Kconfig") removed the only dependency that used it. Setting it had no effect anymore. So commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") removed it. For some reason that commit did not remove all select statements for that symbol. These statements are now useless. Remove one from shmobile too. Signed-off-by: Paul Bolle Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 21f457b56c01..f59019dd986e 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -36,7 +36,6 @@ menuconfig ARCH_SHMOBILE_MULTI select NO_IOPORT_MAP select PINCTRL select ARCH_REQUIRE_GPIOLIB - select ARCH_HAS_OPP if ARCH_SHMOBILE_MULTI -- cgit v1.2.3 From c9095970ceb8f46ede77d1de7ed0275099e55d2a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 28 Aug 2014 14:00:43 +0200 Subject: ARM: dts: Sort SHMOBILE dtbs alphabetically Signed-off-by: Geert Uytterhoeven [horms+renesas@verge.net.au: update for addition of r8a7794-alt.dtb] Signed-off-by: Simon Horman --- arch/arm/boot/dts/Makefile | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38c89cafa1ab..88282c8d5ba6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -377,24 +377,24 @@ dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \ s5pv210-smdkv210.dtb \ s5pv210-torbreck.dtb dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ + r8a73a4-ape6evm.dtb \ + r8a73a4-ape6evm-reference.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ r8a7779-marzen.dtb \ - r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ + r8a7791-koelsch.dtb \ + sh7372-mackerel.dtb \ sh73a0-kzm9g.dtb \ - sh73a0-kzm9g-reference.dtb \ - r8a73a4-ape6evm.dtb \ - r8a73a4-ape6evm-reference.dtb \ - sh7372-mackerel.dtb + sh73a0-kzm9g-reference.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7779-marzen.dtb \ + r8a7790-lager.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ - r8a7790-lager.dtb \ - r8a7779-marzen.dtb \ r8a7794-alt.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ -- cgit v1.2.3 From 6a8663f8bb5e3e2bf0d362744db844f2678d9b8b Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 25 Sep 2014 10:32:11 +0900 Subject: ARM: shmobile: r8a73a4: Remove spurious dma-multiplexer base addresses As there is no reg property the dma-multiplexer nodes should not include @... Reported-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index ef152e384822..8a70dcd1f346 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -122,7 +122,7 @@ <0 57 IRQ_TYPE_LEVEL_HIGH>; }; - dmac: dma-multiplexer@0 { + dmac: dma-multiplexer { compatible = "renesas,shdma-mux"; #dma-cells = <1>; dma-channels = <20>; -- cgit v1.2.3 From 005980c0024ecd192c2eac3e3a9dcda1bedddffb Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Thu, 25 Sep 2014 10:32:12 +0900 Subject: ARM: shmobile: r7s72100: sort dtsi file by address Signed-off-by: Ulrich Hecht Signed-off-by: Simon Horman --- arch/arm/boot/dts/r7s72100.dtsi | 202 ++++++++++++++++++++-------------------- 1 file changed, 101 insertions(+), 101 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 801a556e264b..277e73c110e5 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -52,16 +52,6 @@ clock-output-names = "usb_x1"; }; - /* Special CPG clocks */ - cpg_clocks: cpg_clocks@fcfe0000 { - #clock-cells = <1>; - compatible = "renesas,r7s72100-cpg-clocks", - "renesas,rz-cpg-clocks"; - reg = <0xfcfe0000 0x18>; - clocks = <&extal_clk>, <&usb_x1_clk>; - clock-output-names = "pll", "i", "g"; - }; - /* Fixed factor clocks */ b_clk: b_clk { #clock-cells = <0>; @@ -88,6 +78,16 @@ clock-output-names = "p0"; }; + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@fcfe0000 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-cpg-clocks", + "renesas,rz-cpg-clocks"; + reg = <0xfcfe0000 0x18>; + clocks = <&extal_clk>, <&usb_x1_clk>; + clock-output-names = "pll", "i", "g"; + }; + /* MSTP clocks */ mstp3_clks: mstp3_clks@fcfe0420 { #clock-cells = <1>; @@ -148,97 +148,6 @@ }; }; - gic: interrupt-controller@e8201000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0xe8201000 0x1000>, - <0xe8202000 0x1000>; - }; - - i2c0: i2c@fcfee000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; - reg = <0xfcfee000 0x44>; - interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>, - <0 158 IRQ_TYPE_EDGE_RISING>, - <0 159 IRQ_TYPE_EDGE_RISING>, - <0 160 IRQ_TYPE_LEVEL_HIGH>, - <0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 162 IRQ_TYPE_LEVEL_HIGH>, - <0 163 IRQ_TYPE_LEVEL_HIGH>, - <0 164 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp9_clks R7S72100_CLK_I2C0>; - clock-frequency = <100000>; - status = "disabled"; - }; - - i2c1: i2c@fcfee400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; - reg = <0xfcfee400 0x44>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>, - <0 166 IRQ_TYPE_EDGE_RISING>, - <0 167 IRQ_TYPE_EDGE_RISING>, - <0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 169 IRQ_TYPE_LEVEL_HIGH>, - <0 170 IRQ_TYPE_LEVEL_HIGH>, - <0 171 IRQ_TYPE_LEVEL_HIGH>, - <0 172 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp9_clks R7S72100_CLK_I2C1>; - clock-frequency = <100000>; - status = "disabled"; - }; - - i2c2: i2c@fcfee800 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; - reg = <0xfcfee800 0x44>; - interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>, - <0 174 IRQ_TYPE_EDGE_RISING>, - <0 175 IRQ_TYPE_EDGE_RISING>, - <0 176 IRQ_TYPE_LEVEL_HIGH>, - <0 177 IRQ_TYPE_LEVEL_HIGH>, - <0 178 IRQ_TYPE_LEVEL_HIGH>, - <0 179 IRQ_TYPE_LEVEL_HIGH>, - <0 180 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp9_clks R7S72100_CLK_I2C2>; - clock-frequency = <100000>; - status = "disabled"; - }; - - i2c3: i2c@fcfeec00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; - reg = <0xfcfeec00 0x44>; - interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>, - <0 182 IRQ_TYPE_EDGE_RISING>, - <0 183 IRQ_TYPE_EDGE_RISING>, - <0 184 IRQ_TYPE_LEVEL_HIGH>, - <0 185 IRQ_TYPE_LEVEL_HIGH>, - <0 186 IRQ_TYPE_LEVEL_HIGH>, - <0 187 IRQ_TYPE_LEVEL_HIGH>, - <0 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp9_clks R7S72100_CLK_I2C3>; - clock-frequency = <100000>; - status = "disabled"; - }; - - mtu2: timer@fcff0000 { - compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; - reg = <0xfcff0000 0x400>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tgi0a"; - clocks = <&mstp3_clks R7S72100_CLK_MTU2>; - clock-names = "fck"; - status = "disabled"; - }; - scif0: serial@e8007000 { compatible = "renesas,scif-r7s72100", "renesas,scif"; reg = <0xe8007000 64>; @@ -404,4 +313,95 @@ #size-cells = <0>; status = "disabled"; }; + + gic: interrupt-controller@e8201000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0xe8201000 0x1000>, + <0xe8202000 0x1000>; + }; + + i2c0: i2c@fcfee000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; + reg = <0xfcfee000 0x44>; + interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>, + <0 158 IRQ_TYPE_EDGE_RISING>, + <0 159 IRQ_TYPE_EDGE_RISING>, + <0 160 IRQ_TYPE_LEVEL_HIGH>, + <0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 162 IRQ_TYPE_LEVEL_HIGH>, + <0 163 IRQ_TYPE_LEVEL_HIGH>, + <0 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@fcfee400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; + reg = <0xfcfee400 0x44>; + interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>, + <0 166 IRQ_TYPE_EDGE_RISING>, + <0 167 IRQ_TYPE_EDGE_RISING>, + <0 168 IRQ_TYPE_LEVEL_HIGH>, + <0 169 IRQ_TYPE_LEVEL_HIGH>, + <0 170 IRQ_TYPE_LEVEL_HIGH>, + <0 171 IRQ_TYPE_LEVEL_HIGH>, + <0 172 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@fcfee800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; + reg = <0xfcfee800 0x44>; + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>, + <0 174 IRQ_TYPE_EDGE_RISING>, + <0 175 IRQ_TYPE_EDGE_RISING>, + <0 176 IRQ_TYPE_LEVEL_HIGH>, + <0 177 IRQ_TYPE_LEVEL_HIGH>, + <0 178 IRQ_TYPE_LEVEL_HIGH>, + <0 179 IRQ_TYPE_LEVEL_HIGH>, + <0 180 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C2>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c3: i2c@fcfeec00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; + reg = <0xfcfeec00 0x44>; + interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>, + <0 182 IRQ_TYPE_EDGE_RISING>, + <0 183 IRQ_TYPE_EDGE_RISING>, + <0 184 IRQ_TYPE_LEVEL_HIGH>, + <0 185 IRQ_TYPE_LEVEL_HIGH>, + <0 186 IRQ_TYPE_LEVEL_HIGH>, + <0 187 IRQ_TYPE_LEVEL_HIGH>, + <0 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C3>; + clock-frequency = <100000>; + status = "disabled"; + }; + + mtu2: timer@fcff0000 { + compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; + reg = <0xfcff0000 0x400>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tgi0a"; + clocks = <&mstp3_clks R7S72100_CLK_MTU2>; + clock-names = "fck"; + status = "disabled"; + }; }; -- cgit v1.2.3 From b97950cf04b32adf0f7521397c5fefa17208e71d Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Thu, 25 Sep 2014 10:32:13 +0900 Subject: ARM: shmobile: kzm9d: sort dts file by address Signed-off-by: Ulrich Hecht Signed-off-by: Simon Horman --- arch/arm/boot/dts/emev2-kzm9d.dts | 62 +++++++++++++++++++-------------------- 1 file changed, 31 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 50ccd151091e..a1794cbd23fe 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -27,37 +27,6 @@ bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp"; }; - reg_1p8v: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - lan9220@20000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x20000000 0x10000>; - phy-mode = "mii"; - interrupt-parent = <&gpio0>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vddvario-supply = <®_1p8v>; - vdd33a-supply = <®_3p3v>; - }; - gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -92,4 +61,35 @@ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; }; }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + lan9220@20000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x20000000 0x10000>; + phy-mode = "mii"; + interrupt-parent = <&gpio0>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; }; -- cgit v1.2.3 From 7300505a9b60f245c227dadff26c8d12ffb64559 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Thu, 25 Sep 2014 10:32:14 +0900 Subject: ARM: shmobile: r8a73a4: sort dtsi file by address Signed-off-by: Ulrich Hecht [horms+renesas@verge.net.au: updated for removal of dma-multiplexer base address] Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4.dtsi | 232 ++++++++++++++++++++--------------------- 1 file changed, 116 insertions(+), 116 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 8a70dcd1f346..c17afef92e8d 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -30,18 +30,6 @@ }; }; - gic: interrupt-controller@f1001000 { - compatible = "arm,cortex-a15-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x1000>, - <0 0xf1004000 0 0x2000>, - <0 0xf1006000 0 0x2000>; - interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -50,6 +38,80 @@ <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + dmac: dma-multiplexer { + compatible = "renesas,shdma-mux"; + #dma-cells = <1>; + dma-channels = <20>; + dma-requests = <256>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dma0: dma-controller@e6700020 { + compatible = "renesas,shdma-r8a73a4"; + reg = <0 0xe6700020 0 0x89e0>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH + 0 215 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19"; + }; + }; + + pfc: pfc@e6050000 { + compatible = "renesas,pfc-r8a73a4"; + reg = <0 0xe6050000 0 0x9000>; + gpio-controller; + #gpio-cells = <2>; + interrupts-extended = + <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>, + <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>, + <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>, + <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>, + <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>, + <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>, + <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>, + <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>, + <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>, + <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>, + <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>, + <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>, + <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>, + <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>, + <&irqc1 24 0>, <&irqc1 25 0>; + }; + + i2c5: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x428>; + interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + irqc0: interrupt-controller@e61c0000 { compatible = "renesas,irqc-r8a73a4", "renesas,irqc"; #interrupt-cells = <2>; @@ -122,48 +184,6 @@ <0 57 IRQ_TYPE_LEVEL_HIGH>; }; - dmac: dma-multiplexer { - compatible = "renesas,shdma-mux"; - #dma-cells = <1>; - dma-channels = <20>; - dma-requests = <256>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dma0: dma-controller@e6700020 { - compatible = "renesas,shdma-r8a73a4"; - reg = <0 0xe6700020 0 0x89e0>; - interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH - 0 200 IRQ_TYPE_LEVEL_HIGH - 0 201 IRQ_TYPE_LEVEL_HIGH - 0 202 IRQ_TYPE_LEVEL_HIGH - 0 203 IRQ_TYPE_LEVEL_HIGH - 0 204 IRQ_TYPE_LEVEL_HIGH - 0 205 IRQ_TYPE_LEVEL_HIGH - 0 206 IRQ_TYPE_LEVEL_HIGH - 0 207 IRQ_TYPE_LEVEL_HIGH - 0 208 IRQ_TYPE_LEVEL_HIGH - 0 209 IRQ_TYPE_LEVEL_HIGH - 0 210 IRQ_TYPE_LEVEL_HIGH - 0 211 IRQ_TYPE_LEVEL_HIGH - 0 212 IRQ_TYPE_LEVEL_HIGH - 0 213 IRQ_TYPE_LEVEL_HIGH - 0 214 IRQ_TYPE_LEVEL_HIGH - 0 215 IRQ_TYPE_LEVEL_HIGH - 0 216 IRQ_TYPE_LEVEL_HIGH - 0 217 IRQ_TYPE_LEVEL_HIGH - 0 218 IRQ_TYPE_LEVEL_HIGH - 0 219 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14", "ch15", - "ch16", "ch17", "ch18", "ch19"; - }; - }; - thermal@e61f0000 { compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, @@ -216,15 +236,6 @@ status = "disabled"; }; - i2c5: i2c@e60b0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,rmobile-iic"; - reg = <0 0xe60b0000 0 0x428>; - interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - i2c6: i2c@e6550000 { #address-cells = <1>; #size-cells = <0>; @@ -252,20 +263,6 @@ status = "disabled"; }; - scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; - reg = <0 0xe6c40000 0 0x100>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; - reg = <0 0xe6c50000 0 0x100>; - interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - scifb2: serial@e6c20000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6c20000 0 0x100>; @@ -280,6 +277,20 @@ status = "disabled"; }; + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x100>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x100>; + interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + scifb4: serial@e6ce0000 { compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; reg = <0 0xe6ce0000 0 0x100>; @@ -294,45 +305,6 @@ status = "disabled"; }; - mmcif0: mmc@ee200000 { - compatible = "renesas,sh-mmcif"; - reg = <0 0xee200000 0 0x80>; - interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <4>; - status = "disabled"; - }; - - mmcif1: mmc@ee220000 { - compatible = "renesas,sh-mmcif"; - reg = <0 0xee220000 0 0x80>; - interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <4>; - status = "disabled"; - }; - - pfc: pfc@e6050000 { - compatible = "renesas,pfc-r8a73a4"; - reg = <0 0xe6050000 0 0x9000>; - gpio-controller; - #gpio-cells = <2>; - interrupts-extended = - <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>, - <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>, - <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>, - <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>, - <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>, - <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>, - <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>, - <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>, - <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>, - <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>, - <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>, - <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>, - <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>, - <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>, - <&irqc1 24 0>, <&irqc1 25 0>; - }; - sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; @@ -356,4 +328,32 @@ cap-sd-highspeed; status = "disabled"; }; + + mmcif0: mmc@ee200000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <4>; + status = "disabled"; + }; + + mmcif1: mmc@ee220000 { + compatible = "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <4>; + status = "disabled"; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; }; -- cgit v1.2.3 From e8e0a1c70c53558ab9295a1a37aefab8fee15e1d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 16:55:52 +0200 Subject: ARM: shmobile: r7s72100: Remove r7s72100-genmai.dtb for ARCH_SHMOBILE_LEGACY Forgotten by commit ad8c3af8b75ff26c ("ARM: shmobile: r7s72100: Remove legacy board support"). Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 88282c8d5ba6..59b6d3e5aaf0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -376,7 +376,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \ s5pv210-smdkc110.dtb \ s5pv210-smdkv210.dtb \ s5pv210-torbreck.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ +dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ r8a73a4-ape6evm.dtb \ r8a73a4-ape6evm-reference.dtb \ r8a7740-armadillo800eva.dtb \ -- cgit v1.2.3 From 87982b2d9a75e10b357e6015f27b94011fc697be Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 17:11:32 +0200 Subject: ARM: shmobile: emev2 dtsi: Use generic names for device nodes smu -> clocks sti -> timer uart -> serial All but "clocks" are defined in ePAPR v1.1. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/emev2.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 00eeed3721b6..5fe9212b6bc5 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -55,7 +55,7 @@ <0 121 IRQ_TYPE_LEVEL_HIGH>; }; - smu@e0110000 { + clocks@e0110000 { compatible = "renesas,emev2-smu"; reg = <0xe0110000 0x10000>; #address-cells = <2>; @@ -129,7 +129,7 @@ }; }; - sti@e0180000 { + timer@e0180000 { compatible = "renesas,em-sti"; reg = <0xe0180000 0x54>; interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; @@ -137,7 +137,7 @@ clock-names = "sclk"; }; - uart@e1020000 { + serial@e1020000 { compatible = "renesas,em-uart"; reg = <0xe1020000 0x38>; interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; @@ -145,7 +145,7 @@ clock-names = "sclk"; }; - uart@e1030000 { + serial@e1030000 { compatible = "renesas,em-uart"; reg = <0xe1030000 0x38>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; @@ -153,7 +153,7 @@ clock-names = "sclk"; }; - uart@e1040000 { + serial@e1040000 { compatible = "renesas,em-uart"; reg = <0xe1040000 0x38>; interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; @@ -161,7 +161,7 @@ clock-names = "sclk"; }; - uart@e1050000 { + serial@e1050000 { compatible = "renesas,em-uart"; reg = <0xe1050000 0x38>; interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; -- cgit v1.2.3 From e87aabaf24d660e3d4c68cfbd6aae0814b573375 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 17:11:33 +0200 Subject: ARM: shmobile: emev2 dtsi: Add uart* labels for easier referencing Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/emev2.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 5fe9212b6bc5..cc7bfe0ba40a 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -137,7 +137,7 @@ clock-names = "sclk"; }; - serial@e1020000 { + uart0: serial@e1020000 { compatible = "renesas,em-uart"; reg = <0xe1020000 0x38>; interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; @@ -145,7 +145,7 @@ clock-names = "sclk"; }; - serial@e1030000 { + uart1: serial@e1030000 { compatible = "renesas,em-uart"; reg = <0xe1030000 0x38>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; @@ -153,7 +153,7 @@ clock-names = "sclk"; }; - serial@e1040000 { + uart2: serial@e1040000 { compatible = "renesas,em-uart"; reg = <0xe1040000 0x38>; interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; @@ -161,7 +161,7 @@ clock-names = "sclk"; }; - serial@e1050000 { + uart3: serial@e1050000 { compatible = "renesas,em-uart"; reg = <0xe1050000 0x38>; interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; -- cgit v1.2.3 From a67898660278c5a2f1242daafad0fc7535ff0344 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 17:11:35 +0200 Subject: ARM: shmobile: genmai dts: Add chosen/stdout-path Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. Remove the now-superfluous "console=" parameter from chosen/bootargs. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r7s72100-genmai.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index a3ed23c0a8f5..1518c5bcca33 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -21,7 +21,8 @@ }; chosen { - bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = &scif2; }; memory { -- cgit v1.2.3 From 71787aaa6015c4b7f47126c053afd8f2bebb00d7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 17:11:36 +0200 Subject: ARM: shmobile: ape6evm-reference dts: Add chosen/stdout-path Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. In addition, this will allow the PM domain code to find the PM domain for the console device. Remove the now-superfluous "console=" parameter from chosen/bootargs. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts index a860f32bca27..2bcf69124a6a 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts @@ -21,7 +21,8 @@ }; chosen { - bootargs = "console=ttySC0,115200 ignore_loglevel rw"; + bootargs = "ignore_loglevel rw"; + stdout-path = &scifa0; }; memory@40000000 { -- cgit v1.2.3 From 2c32622c3f3f9c7e0d3480c1fc0a31a95e04dd91 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 17:11:37 +0200 Subject: ARM: shmobile: armadillo800eva dts: Add chosen/stdout-path Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. In addition, this will allow the PM domain code to find the PM domain for the console device. Note that we have to keep the "console=ttySC1" parameter in chosen/bootargs, else we only get console messages on tty0, and because this DTS is shared between legacy and multi-platform. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index effb7b46f131..2703428557fc 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; + stdout-path = &scifa1; }; memory { -- cgit v1.2.3 From 05988b32e3551ffd23e095b3e409db112bb84809 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 17:11:38 +0200 Subject: ARM: shmobile: bockw-reference dts: Add chosen/stdout-path Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. Remove the now-superfluous "console=" parameter from chosen/bootargs. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7778-bockw-reference.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index 3342c74c5de8..fba294905ff4 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -28,7 +28,8 @@ }; chosen { - bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; + bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw"; + stdout-path = &scif0; }; memory { -- cgit v1.2.3 From 1877a35096a3aebd6e848b688f8a50b75882b7e3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 17:11:39 +0200 Subject: ARM: shmobile: marzen dts: Add chosen/stdout-path Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. Note that we have to keep the "console=" parameter in chosen/bootargs, as this DTS is shared between legacy and multi-platform. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7779-marzen.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index c160404e4d40..9e1b859190ca 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on"; + stdout-path = &scif2; }; memory { -- cgit v1.2.3 From cf8558160747694f6011fe26aad79d50f3a40554 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 17:11:40 +0200 Subject: ARM: shmobile: lager dts: Add chosen/stdout-path Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. Note that we have to keep the "console=" parameter in chosen/bootargs, as this DTS is shared between legacy and multi-platform. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 69098b906b39..854c13e3e6c0 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = &scifa0; }; memory@40000000 { -- cgit v1.2.3 From 8590e2d742c1687a733a90edc25ab0178d6a66fc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 17:11:41 +0200 Subject: ARM: shmobile: henninger dts: Add chosen/stdout-path Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. Note that we have to keep the "console=ttySC0,38400" parameter in chosen/bootargs, else the console will use the default setting of 115200 baud. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-henninger.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index f1b56de10205..0868899882e3 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -23,6 +23,7 @@ chosen { bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = &scif0; }; memory@40000000 { -- cgit v1.2.3 From 17323b3615b54bd80ba7e9056c62266e7df24f27 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 17:11:42 +0200 Subject: ARM: shmobile: koelsch dts: Add chosen/stdout-path Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. Note that we have to keep the "console=" parameter in chosen/bootargs, as this DTS is shared between legacy and multi-platform. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 07550e775e80..9497cc2c51f1 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -26,6 +26,7 @@ chosen { bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = &scif0; }; memory@40000000 { -- cgit v1.2.3 From b4a0f50cc70fef466e5b9935519b8213611e75bb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 17:11:43 +0200 Subject: ARM: shmobile: alt dts: Add chosen/stdout-path Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. Note that we have to keep the "console=ttySC0,38400" parameter in chosen/bootargs, else the console will use the default setting of 115200 baud. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794-alt.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 79d06ef017a0..8aec51268b7d 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -21,6 +21,7 @@ chosen { bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = &scif2; }; memory@40000000 { -- cgit v1.2.3 From 59ab5bff23020b6223857a460a39b9ec71d91cea Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Oct 2014 17:11:44 +0200 Subject: ARM: shmobile: kzm9g-reference dts: Add chosen/stdout-path Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. In addition, this will allow the PM domain code to find the PM domain for the console device. Note that we have to keep the "console=ttySC4" parameter in chosen/bootargs, else we only get console messages on tty0. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 30ef97e99dc5..0dac0e66ccad 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -40,6 +40,7 @@ chosen { bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; + stdout-path = &scifa4; }; memory { -- cgit v1.2.3 From 120f038cf04b95dc895cba503a7516ff75561438 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 6 Oct 2014 13:59:13 +0200 Subject: ARM: shmobile: kzm9d dts: Add chosen/stdout-path Add a stdout-path property so that automatic console selection works in the absence of a "console=" parameter on the kernel command line. Note that we have to keep the "console=ttyS1,115200n81" parameter in chosen/bootargs, else the console will use the default setting of 9600 baud. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/emev2-kzm9d.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index a1794cbd23fe..667d323e80a3 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp"; + stdout-path = &uart1; }; gpio_keys { -- cgit v1.2.3 From f4115f25c11790646351df243dae070a7cf80163 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 11 Aug 2014 11:38:59 +0900 Subject: ARM: shmobile: armadillo800eva: Sort includes Sorted includes seems to be the done thing these days. Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 40 +++++++++++++------------- 1 file changed, 20 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index e70983534403..f19459a8c3ed 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -22,43 +22,43 @@ #include #include #include -#include -#include -#include -#include -#include #include #include -#include +#include +#include +#include +#include +#include +#include +#include +#include #include +#include +#include #include #include +#include +#include #include #include #include #include -#include #include -#include -#include -#include -#include -#include -#include +#include -#include -#include -#include -#include +#include #include #include #include #include -#include -#include