From 33959f88fce9b8d3346d8000b3425814cbc6d6c0 Mon Sep 17 00:00:00 2001
From: Michael Neuling <mikey@neuling.org>
Date: Thu, 18 Jul 2013 11:31:51 +1000
Subject: powerpc: Add second POWER8 PVR entry

POWER8 comes with two different PVRs.  This patch enables the additional
PVR in the cputable.

The existing entry (PVR=0x4b) is renamed to POWER8E and the new entry
(PVR=0x4d) is given POWER8.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/reg.h  |  3 ++-
 arch/powerpc/kernel/cputable.c  | 20 +++++++++++++++++++-
 arch/powerpc/kernel/prom_init.c |  5 +++--
 3 files changed, 24 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 5d7d9c2a5473..a6840e4e24f7 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1088,7 +1088,8 @@
 #define PVR_970MP	0x0044
 #define PVR_970GX	0x0045
 #define PVR_POWER7p	0x004A
-#define PVR_POWER8	0x004B
+#define PVR_POWER8E	0x004B
+#define PVR_POWER8	0x004D
 #define PVR_BE		0x0070
 #define PVR_PA6T	0x0090
 
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 2a45d0f04385..22973a74df73 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -494,9 +494,27 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_restore		= __restore_cpu_power7,
 		.platform		= "power7+",
 	},
-	{	/* Power8 */
+	{	/* Power8E */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x004b0000,
+		.cpu_name		= "POWER8E (raw)",
+		.cpu_features		= CPU_FTRS_POWER8,
+		.cpu_user_features	= COMMON_USER_POWER8,
+		.cpu_user_features2	= COMMON_USER2_POWER8,
+		.mmu_features		= MMU_FTRS_POWER8,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
+		.oprofile_cpu_type	= "ppc64/power8",
+		.oprofile_type		= PPC_OPROFILE_INVALID,
+		.cpu_setup		= __setup_cpu_power8,
+		.cpu_restore		= __restore_cpu_power8,
+		.platform		= "power8",
+	},
+	{	/* Power8 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x004d0000,
 		.cpu_name		= "POWER8 (raw)",
 		.cpu_features		= CPU_FTRS_POWER8,
 		.cpu_user_features	= COMMON_USER_POWER8,
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 5eccda9fd33f..607902424e73 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -644,7 +644,8 @@ unsigned char ibm_architecture_vec[] = {
 	W(0xfffe0000), W(0x003a0000),	/* POWER5/POWER5+ */
 	W(0xffff0000), W(0x003e0000),	/* POWER6 */
 	W(0xffff0000), W(0x003f0000),	/* POWER7 */
-	W(0xffff0000), W(0x004b0000),	/* POWER8 */
+	W(0xffff0000), W(0x004b0000),	/* POWER8E */
+	W(0xffff0000), W(0x004d0000),	/* POWER8 */
 	W(0xffffffff), W(0x0f000004),	/* all 2.07-compliant */
 	W(0xffffffff), W(0x0f000003),	/* all 2.06-compliant */
 	W(0xffffffff), W(0x0f000002),	/* all 2.05-compliant */
@@ -706,7 +707,7 @@ unsigned char ibm_architecture_vec[] = {
 	 * must match by the macro below. Update the definition if
 	 * the structure layout changes.
 	 */
-#define IBM_ARCH_VEC_NRCORES_OFFSET	117
+#define IBM_ARCH_VEC_NRCORES_OFFSET	125
 	W(NR_CPUS),			/* number of cores supported */
 	0,
 	0,
-- 
cgit v1.2.3


From 0e0ed6406e61434d3f38fb58aa8464ec4722b77e Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 15 Jul 2013 14:04:50 +1000
Subject: powerpc/modules: Module CRC relocation fix causes perf issues

Module CRCs are implemented as absolute symbols that get resolved by
a linker script. We build an intermediate .o that contains an
unresolved symbol for each CRC. genksysms parses this .o, calculates
the CRCs and writes a linker script that "resolves" the symbols to
the calculated CRC.

Unfortunately the ppc64 relocatable kernel sees these CRCs as symbols
that need relocating and relocates them at boot. Commit d4703aef
(module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y)
added a hook to reverse the bogus relocations. Part of this patch
created a symbol at 0x0:

# head -2 /proc/kallsyms
0000000000000000 T reloc_start
c000000000000000 T .__start

This reloc_start symbol is causing lots of confusion to perf. It
thinks reloc_start is a massive function that stretches from 0x0 to
0xc000000000000000 and we get various cryptic errors out of perf,
including:

problem incrementing symbol count, skipping event

This patch removes the  reloc_start linker script label and instead
defines it as PHYSICAL_START. We also need to wrap it with
CONFIG_PPC64 because the ppc32 kernel can set a non zero
PHYSICAL_START at compile time and we wouldn't want to subtract
it from the CRCs in that case.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/module.h | 5 ++---
 arch/powerpc/kernel/vmlinux.lds.S | 3 ---
 2 files changed, 2 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
index c1df590ec444..49fa55bfbac4 100644
--- a/arch/powerpc/include/asm/module.h
+++ b/arch/powerpc/include/asm/module.h
@@ -82,10 +82,9 @@ struct exception_table_entry;
 void sort_ex_table(struct exception_table_entry *start,
 		   struct exception_table_entry *finish);
 
-#ifdef CONFIG_MODVERSIONS
+#if defined(CONFIG_MODVERSIONS) && defined(CONFIG_PPC64)
 #define ARCH_RELOCATES_KCRCTAB
-
-extern const unsigned long reloc_start[];
+#define reloc_start PHYSICAL_START
 #endif
 #endif /* __KERNEL__ */
 #endif	/* _ASM_POWERPC_MODULE_H */
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 654e479802f2..f096e72262f4 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -38,9 +38,6 @@ jiffies = jiffies_64 + 4;
 #endif
 SECTIONS
 {
-	. = 0;
-	reloc_start = .;
-
 	. = KERNELBASE;
 
 /*
-- 
cgit v1.2.3


From 0b88f772bdf2847461debf417b1ee96043a7cb1b Mon Sep 17 00:00:00 2001
From: Tiejun Chen <tiejun.chen@windriver.com>
Date: Mon, 15 Jul 2013 10:36:04 +0800
Subject: powerpc: Access local paca after hard irq disabled

In hard_irq_disable(), we accessed the PACA before we hard disabled
the interrupts, potentially causing a warning as get_paca() will
us debug_smp_processor_id().

Move that to after the disabling, and also use local_paca directly
rather than get_paca() to avoid several redundant and useless checks.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/hw_irq.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index ba713f166fa5..10be1dd01c6b 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -96,10 +96,11 @@ static inline bool arch_irqs_disabled(void)
 #endif
 
 #define hard_irq_disable()	do {			\
-	u8 _was_enabled = get_paca()->soft_enabled;	\
+	u8 _was_enabled;				\
 	__hard_irq_disable();				\
-	get_paca()->soft_enabled = 0;			\
-	get_paca()->irq_happened |= PACA_IRQ_HARD_DIS;	\
+	_was_enabled = local_paca->soft_enabled;	\
+	local_paca->soft_enabled = 0;			\
+	local_paca->irq_happened |= PACA_IRQ_HARD_DIS;	\
 	if (_was_enabled)				\
 		trace_hardirqs_off();			\
 } while(0)
-- 
cgit v1.2.3


From 97645154a9056106a957905c7836a016e5c89b3b Mon Sep 17 00:00:00 2001
From: Paul Bolle <pebolle@tiscali.nl>
Date: Sun, 14 Jul 2013 13:02:15 +0200
Subject: powerpc/pseries: Drop "select HOTPLUG"

The Kconfig symbol HOTPLUG was removed with commit 40b313608a ("Finally
eradicate CONFIG_HOTPLUG"). But there's still one select statement for
that symbol. It seems that select statement was added after the patch to
remove CONFIG_HOTPLUG was submitted. Anyhow, it is useless and can be
dropped.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 1bd3399146ed..62b4f8025de0 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -19,7 +19,6 @@ config PPC_PSERIES
 	select ZLIB_DEFLATE
 	select PPC_DOORBELL
 	select HAVE_CONTEXT_TRACKING
-	select HOTPLUG if SMP
 	select HOTPLUG_CPU if SMP
 	default y
 
-- 
cgit v1.2.3


From 5d7ead0039b0c9500825b46997896352810efb0b Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Sat, 13 Jul 2013 12:53:40 +1000
Subject: powerpc/perf: Set PPC_FEATURE2_EBB when we register the power8 PMU

The presence or absence of EBB is advertised to userspace via the presence
or absence of PPC_FEATURE2_EBB in cpu_user_features2.

Because the kernel can be built without PMU support, we should only add
PPC_FEATURE2_EBB to cpu_user_features2 when we successfully register the
power8 PMU support.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/perf/power8-pmu.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index 96a64d6a8bdf..09def196f5c4 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -621,10 +621,19 @@ static struct power_pmu power8_pmu = {
 
 static int __init init_power8_pmu(void)
 {
+	int rc;
+
 	if (!cur_cpu_spec->oprofile_cpu_type ||
 	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power8"))
 		return -ENODEV;
 
-	return register_power_pmu(&power8_pmu);
+	rc = register_power_pmu(&power8_pmu);
+	if (rc)
+		return rc;
+
+	/* Tell userspace that EBB is supported */
+	cur_cpu_spec->cpu_user_features2 |= PPC_FEATURE2_EBB;
+
+	return 0;
 }
 early_initcall(init_power8_pmu);
-- 
cgit v1.2.3


From ee1dd1e3dc774cf257012215d996e8e7e370c162 Mon Sep 17 00:00:00 2001
From: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Date: Wed, 10 Jul 2013 18:32:56 +0530
Subject: powerpc: Fix the corrupt r3 error during MCE handling.

During Machine Check interrupt on pseries platform, R3 generally points to
memory region inside RTAS (FWNMI) area. We see r3 corruption because when RTAS
delivers the machine check exception it passes the address inside FWNMI area
with the top most bit set. This patch fixes this issue by masking top two bit
in machine check exception handler.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/ras.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 7b3cbde8c783..721c0586b284 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -287,6 +287,9 @@ static struct rtas_error_log *fwnmi_get_errinfo(struct pt_regs *regs)
 	unsigned long *savep;
 	struct rtas_error_log *h, *errhdr = NULL;
 
+	/* Mask top two bits */
+	regs->gpr[3] &= ~(0x3UL << 62);
+
 	if (!VALID_FWNMI_BUFFER(regs->gpr[3])) {
 		printk(KERN_ERR "FWNMI: corrupt r3 0x%016lx\n", regs->gpr[3]);
 		return NULL;
-- 
cgit v1.2.3


From 0ba178888b05a4efdaca7da528c170bd09f9687b Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:51 +0800
Subject: powerpc/eeh: Remove reference to PCI device

We will rely on pcibios_release_device() to remove the EEH cache
and unbind EEH device for the specific PCI device. So we shouldn't
hold the reference to the PCI device from EEH cache and EEH device.
Otherwise, pcibios_release_device() won't be called as we expected.
The patch removes the reference to the PCI device in EEH core.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/eeh.c       |  4 ----
 arch/powerpc/kernel/eeh_cache.c | 18 +++++-------------
 2 files changed, 5 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 39954fe941b8..b5c425ea2974 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -499,8 +499,6 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
 	}
 
 	eeh_dev_check_failure(edev);
-
-	pci_dev_put(eeh_dev_to_pci_dev(edev));
 	return val;
 }
 
@@ -904,7 +902,6 @@ static void eeh_add_device_late(struct pci_dev *dev)
 	}
 	WARN_ON(edev->pdev);
 
-	pci_dev_get(dev);
 	edev->pdev = dev;
 	dev->dev.archdata.edev = edev;
 
@@ -992,7 +989,6 @@ static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
 	}
 	edev->pdev = NULL;
 	dev->dev.archdata.edev = NULL;
-	pci_dev_put(dev);
 
 	eeh_rmv_from_parent_pe(edev, purge_pe);
 	eeh_addr_cache_rmv_dev(dev);
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index f9ac1232a746..e8c9fd546a5c 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -68,16 +68,12 @@ static inline struct eeh_dev *__eeh_addr_cache_get_device(unsigned long addr)
 		struct pci_io_addr_range *piar;
 		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
 
-		if (addr < piar->addr_lo) {
+		if (addr < piar->addr_lo)
 			n = n->rb_left;
-		} else {
-			if (addr > piar->addr_hi) {
-				n = n->rb_right;
-			} else {
-				pci_dev_get(piar->pcidev);
-				return piar->edev;
-			}
-		}
+		else if (addr > piar->addr_hi)
+			n = n->rb_right;
+		else
+			return piar->edev;
 	}
 
 	return NULL;
@@ -156,7 +152,6 @@ eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
 	if (!piar)
 		return NULL;
 
-	pci_dev_get(dev);
 	piar->addr_lo = alo;
 	piar->addr_hi = ahi;
 	piar->edev = pci_dev_to_eeh_dev(dev);
@@ -250,7 +245,6 @@ restart:
 
 		if (piar->pcidev == dev) {
 			rb_erase(n, &pci_io_addr_cache_root.rb_root);
-			pci_dev_put(piar->pcidev);
 			kfree(piar);
 			goto restart;
 		}
@@ -302,12 +296,10 @@ void eeh_addr_cache_build(void)
 		if (!edev)
 			continue;
 
-		pci_dev_get(dev);  /* matching put is in eeh_remove_device() */
 		dev->dev.archdata.edev = edev;
 		edev->pdev = dev;
 
 		eeh_addr_cache_insert_dev(dev);
-
 		eeh_sysfs_add_device(dev);
 	}
 
-- 
cgit v1.2.3


From f2856491d24044de08da9e53cf7068841a8b4e1c Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:52 +0800
Subject: powerpc/eeh: Export functions for hotplug

Make some functions public in order to support hotplug on either specific
PCI bus or PCI device in future.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/eeh.h | 9 +++++++++
 arch/powerpc/kernel/eeh.c      | 6 +++---
 2 files changed, 12 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 09a8743143f3..d9d35c27de25 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -209,9 +209,12 @@ unsigned long eeh_check_failure(const volatile void __iomem *token,
 				unsigned long val);
 int eeh_dev_check_failure(struct eeh_dev *edev);
 void eeh_addr_cache_build(void);
+void eeh_add_device_early(struct device_node *);
 void eeh_add_device_tree_early(struct device_node *);
+void eeh_add_device_late(struct pci_dev *);
 void eeh_add_device_tree_late(struct pci_bus *);
 void eeh_add_sysfs_files(struct pci_bus *);
+void eeh_remove_device(struct pci_dev *, int);
 void eeh_remove_bus_device(struct pci_dev *, int);
 
 /**
@@ -252,12 +255,18 @@ static inline unsigned long eeh_check_failure(const volatile void __iomem *token
 
 static inline void eeh_addr_cache_build(void) { }
 
+static inline void eeh_add_device_early(struct device_node *dn) { }
+
 static inline void eeh_add_device_tree_early(struct device_node *dn) { }
 
+static inline void eeh_add_device_late(struct pci_dev *dev) { }
+
 static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
 
 static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
 
+static inline void eeh_remove_device(struct pci_dev *dev, int purge_pe) { }
+
 static inline void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) { }
 
 #define EEH_POSSIBLE_ERROR(val, type) (0)
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index b5c425ea2974..582ad1ef46a8 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -836,7 +836,7 @@ core_initcall_sync(eeh_init);
  * on the CEC architecture, type of the device, on earlier boot
  * command-line arguments & etc.
  */
-static void eeh_add_device_early(struct device_node *dn)
+void eeh_add_device_early(struct device_node *dn)
 {
 	struct pci_controller *phb;
 
@@ -884,7 +884,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
  * This routine must be used to complete EEH initialization for PCI
  * devices that were added after system boot (e.g. hotplug, dlpar).
  */
-static void eeh_add_device_late(struct pci_dev *dev)
+void eeh_add_device_late(struct pci_dev *dev)
 {
 	struct device_node *dn;
 	struct eeh_dev *edev;
@@ -972,7 +972,7 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
  * this device will no longer be detected after this call; thus,
  * i/o errors affecting this slot may leave this device unusable.
  */
-static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
+void eeh_remove_device(struct pci_dev *dev, int purge_pe)
 {
 	struct eeh_dev *edev;
 
-- 
cgit v1.2.3


From 008a4938ea07db071f03adffaa3a78c2fbbcde6b Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:53 +0800
Subject: powerpc/pci: Override pcibios_release_device()

The patch overrides pcibios_release_device() to release EEH
resources (EEH cache, unbinding EEH device) for the indicated PCI
device.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/pci-hotplug.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index 3f608800c06b..3dab2f2801b9 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -21,6 +21,17 @@
 #include <asm/firmware.h>
 #include <asm/eeh.h>
 
+/**
+ * pcibios_release_device - release PCI device
+ * @dev: PCI device
+ *
+ * The function is called before releasing the indicated PCI device.
+ */
+void pcibios_release_device(struct pci_dev *dev)
+{
+	eeh_remove_device(dev, 1);
+}
+
 /**
  * __pcibios_remove_pci_devices - remove all devices under this bus
  * @bus: the indicated PCI bus
-- 
cgit v1.2.3


From 807a827d4e7455a40e8f56ec2a67c57a91cab9f7 Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:55 +0800
Subject: powerpc/eeh: Keep PE during hotplug

When we do normal hotplug, the PE (shadow EEH structure) shouldn't be
kept around.

However, we need to keep it if the hotplug an artifial one caused by
EEH errors recovery.

Since we remove EEH device through the PCI hook pcibios_release_device(),
the flag "purge_pe" passed to various functions is meaningless. So the patch
removes the meaningless flag and introduce new flag "EEH_PE_KEEP"
to save the PE while doing hotplug during EEH error recovery.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/eeh.h        | 11 +++++------
 arch/powerpc/include/asm/pci-bridge.h |  1 -
 arch/powerpc/kernel/eeh.c             | 28 ++--------------------------
 arch/powerpc/kernel/eeh_driver.c      |  7 +++++--
 arch/powerpc/kernel/eeh_pe.c          |  7 +++----
 arch/powerpc/kernel/pci-hotplug.c     | 26 +++++---------------------
 6 files changed, 20 insertions(+), 60 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index d9d35c27de25..2ce22d7b71a0 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -55,6 +55,8 @@ struct device_node;
 #define EEH_PE_RECOVERING	(1 << 1)	/* Recovering PE	*/
 #define EEH_PE_PHB_DEAD		(1 << 2)	/* Dead PHB		*/
 
+#define EEH_PE_KEEP		(1 << 8)	/* Keep PE on hotplug	*/
+
 struct eeh_pe {
 	int type;			/* PE type: PHB/Bus/Device	*/
 	int state;			/* PE EEH dependent mode	*/
@@ -193,7 +195,7 @@ int eeh_phb_pe_create(struct pci_controller *phb);
 struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb);
 struct eeh_pe *eeh_pe_get(struct eeh_dev *edev);
 int eeh_add_to_parent_pe(struct eeh_dev *edev);
-int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe);
+int eeh_rmv_from_parent_pe(struct eeh_dev *edev);
 void eeh_pe_update_time_stamp(struct eeh_pe *pe);
 void *eeh_pe_dev_traverse(struct eeh_pe *root,
 		eeh_traverse_func fn, void *flag);
@@ -214,8 +216,7 @@ void eeh_add_device_tree_early(struct device_node *);
 void eeh_add_device_late(struct pci_dev *);
 void eeh_add_device_tree_late(struct pci_bus *);
 void eeh_add_sysfs_files(struct pci_bus *);
-void eeh_remove_device(struct pci_dev *, int);
-void eeh_remove_bus_device(struct pci_dev *, int);
+void eeh_remove_device(struct pci_dev *);
 
 /**
  * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
@@ -265,9 +266,7 @@ static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
 
 static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
 
-static inline void eeh_remove_device(struct pci_dev *dev, int purge_pe) { }
-
-static inline void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) { }
+static inline void eeh_remove_device(struct pci_dev *dev) { }
 
 #define EEH_POSSIBLE_ERROR(val, type) (0)
 #define EEH_IO_ERROR_VALUE(size) (-1UL)
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 2c1d8cb9b265..32d0d2018faf 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -209,7 +209,6 @@ static inline struct eeh_dev *of_node_to_eeh_dev(struct device_node *dn)
 extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
 
 /** Remove all of the PCI devices under this bus */
-extern void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe);
 extern void pcibios_remove_pci_devices(struct pci_bus *bus);
 
 /** Discover new pci devices under this bus, and add them */
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 582ad1ef46a8..ce81477316be 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -964,7 +964,6 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
 /**
  * eeh_remove_device - Undo EEH setup for the indicated pci device
  * @dev: pci device to be removed
- * @purge_pe: remove the PE or not
  *
  * This routine should be called when a device is removed from
  * a running system (e.g. by hotplug or dlpar).  It unregisters
@@ -972,7 +971,7 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
  * this device will no longer be detected after this call; thus,
  * i/o errors affecting this slot may leave this device unusable.
  */
-void eeh_remove_device(struct pci_dev *dev, int purge_pe)
+void eeh_remove_device(struct pci_dev *dev)
 {
 	struct eeh_dev *edev;
 
@@ -990,34 +989,11 @@ void eeh_remove_device(struct pci_dev *dev, int purge_pe)
 	edev->pdev = NULL;
 	dev->dev.archdata.edev = NULL;
 
-	eeh_rmv_from_parent_pe(edev, purge_pe);
+	eeh_rmv_from_parent_pe(edev);
 	eeh_addr_cache_rmv_dev(dev);
 	eeh_sysfs_remove_device(dev);
 }
 
-/**
- * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
- * @dev: PCI device
- * @purge_pe: remove the corresponding PE or not
- *
- * This routine must be called when a device is removed from the
- * running system through hotplug or dlpar. The corresponding
- * PCI address cache will be removed.
- */
-void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe)
-{
-	struct pci_bus *bus = dev->subordinate;
-	struct pci_dev *child, *tmp;
-
-	eeh_remove_device(dev, purge_pe);
-
-	if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
-			 eeh_remove_bus_device(child, purge_pe);
-	}
-}
-EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
-
 static int proc_eeh_show(struct seq_file *m, void *v)
 {
 	if (0 == eeh_subsystem_enabled) {
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 2b1ce17cae50..9ef3bbb8580a 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -362,8 +362,10 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	 * devices are expected to be attached soon when calling
 	 * into pcibios_add_pci_devices().
 	 */
-	if (bus)
-		__pcibios_remove_pci_devices(bus, 0);
+	if (bus) {
+		eeh_pe_state_mark(pe, EEH_PE_KEEP);
+		pcibios_remove_pci_devices(bus);
+	}
 
 	/* Reset the pci controller. (Asserts RST#; resets config space).
 	 * Reconfigure bridges and devices. Don't try to bring the system
@@ -386,6 +388,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	if (bus) {
 		ssleep(5);
 		pcibios_add_pci_devices(bus);
+		eeh_pe_state_clear(pe, EEH_PE_KEEP);
 	}
 
 	pe->tstamp = tstamp;
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 016588a6f5ed..32ef40940bad 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -333,7 +333,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 		while (parent) {
 			if (!(parent->type & EEH_PE_INVALID))
 				break;
-			parent->type &= ~EEH_PE_INVALID;
+			parent->type &= ~(EEH_PE_INVALID | EEH_PE_KEEP);
 			parent = parent->parent;
 		}
 		pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
@@ -397,14 +397,13 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 /**
  * eeh_rmv_from_parent_pe - Remove one EEH device from the associated PE
  * @edev: EEH device
- * @purge_pe: remove PE or not
  *
  * The PE hierarchy tree might be changed when doing PCI hotplug.
  * Also, the PCI devices or buses could be removed from the system
  * during EEH recovery. So we have to call the function remove the
  * corresponding PE accordingly if necessary.
  */
-int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
+int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
 {
 	struct eeh_pe *pe, *parent, *child;
 	int cnt;
@@ -431,7 +430,7 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
 		if (pe->type & EEH_PE_PHB)
 			break;
 
-		if (purge_pe) {
+		if (!(pe->state & EEH_PE_KEEP)) {
 			if (list_empty(&pe->edevs) &&
 			    list_empty(&pe->child_list)) {
 				list_del(&pe->child);
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index 3dab2f2801b9..fc0831d4971f 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -29,49 +29,33 @@
  */
 void pcibios_release_device(struct pci_dev *dev)
 {
-	eeh_remove_device(dev, 1);
+	eeh_remove_device(dev);
 }
 
 /**
- * __pcibios_remove_pci_devices - remove all devices under this bus
+ * pcibios_remove_pci_devices - remove all devices under this bus
  * @bus: the indicated PCI bus
- * @purge_pe: destroy the PE on removal of PCI devices
  *
  * Remove all of the PCI devices under this bus both from the
  * linux pci device tree, and from the powerpc EEH address cache.
- * By default, the corresponding PE will be destroied during the
- * normal PCI hotplug path. For PCI hotplug during EEH recovery,
- * the corresponding PE won't be destroied and deallocated.
  */
-void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
+void pcibios_remove_pci_devices(struct pci_bus *bus)
 {
 	struct pci_dev *dev, *tmp;
 	struct pci_bus *child_bus;
 
 	/* First go down child busses */
 	list_for_each_entry(child_bus, &bus->children, node)
-		__pcibios_remove_pci_devices(child_bus, purge_pe);
+		pcibios_remove_pci_devices(child_bus);
 
 	pr_debug("PCI: Removing devices on bus %04x:%02x\n",
 		 pci_domain_nr(bus),  bus->number);
 	list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
-		pr_debug("     * Removing %s...\n", pci_name(dev));
-		eeh_remove_bus_device(dev, purge_pe);
+		pr_debug("   Removing %s...\n", pci_name(dev));
 		pci_stop_and_remove_bus_device(dev);
 	}
 }
 
-/**
- * pcibios_remove_pci_devices - remove all devices under this bus
- * @bus: the indicated PCI bus
- *
- * Remove all of the PCI devices under this bus both from the
- * linux pci device tree, and from the powerpc EEH address cache.
- */
-void pcibios_remove_pci_devices(struct pci_bus *bus)
-{
-	__pcibios_remove_pci_devices(bus, 1);
-}
 EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
 
 /**
-- 
cgit v1.2.3


From 9feed42e93d2625db86423cedf8b4b2bed00779e Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:56 +0800
Subject: powerpc/eeh: Use safe list traversal when walking EEH devices

Currently, we're trasversing the EEH devices list using list_for_each_entry().
That's not safe enough because the EEH devices might be removed from
its parent PE while doing iteration. The patch replaces that with
list_for_each_entry_safe().

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/eeh.h |  4 ++--
 arch/powerpc/kernel/eeh.c      |  4 ++--
 arch/powerpc/kernel/eeh_pe.c   | 10 +++++-----
 3 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 2ce22d7b71a0..e8c411b63caf 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -74,8 +74,8 @@ struct eeh_pe {
 	struct list_head child;		/* Child PEs			*/
 };
 
-#define eeh_pe_for_each_dev(pe, edev) \
-		list_for_each_entry(edev, &pe->edevs, list)
+#define eeh_pe_for_each_dev(pe, edev, tmp) \
+		list_for_each_entry_safe(edev, tmp, &pe->edevs, list)
 
 /*
  * The struct is used to trace EEH state for the associated
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index ce81477316be..56bd4584f61f 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -231,7 +231,7 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
 void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
 {
 	size_t loglen = 0;
-	struct eeh_dev *edev;
+	struct eeh_dev *edev, *tmp;
 	bool valid_cfg_log = true;
 
 	/*
@@ -251,7 +251,7 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
 		eeh_pe_restore_bars(pe);
 
 		pci_regs_buf[0] = 0;
-		eeh_pe_for_each_dev(pe, edev) {
+		eeh_pe_for_each_dev(pe, edev, tmp) {
 			loglen += eeh_gather_pci_data(edev, pci_regs_buf + loglen,
 						      EEH_PCI_REGS_LOG_LEN - loglen);
 		}
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 32ef40940bad..c8b815e45c8f 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -176,7 +176,7 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root,
 		eeh_traverse_func fn, void *flag)
 {
 	struct eeh_pe *pe;
-	struct eeh_dev *edev;
+	struct eeh_dev *edev, *tmp;
 	void *ret;
 
 	if (!root) {
@@ -186,7 +186,7 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root,
 
 	/* Traverse root PE */
 	for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
-		eeh_pe_for_each_dev(pe, edev) {
+		eeh_pe_for_each_dev(pe, edev, tmp) {
 			ret = fn(edev, flag);
 			if (ret)
 				return ret;
@@ -501,7 +501,7 @@ static void *__eeh_pe_state_mark(void *data, void *flag)
 {
 	struct eeh_pe *pe = (struct eeh_pe *)data;
 	int state = *((int *)flag);
-	struct eeh_dev *tmp;
+	struct eeh_dev *edev, *tmp;
 	struct pci_dev *pdev;
 
 	/*
@@ -511,8 +511,8 @@ static void *__eeh_pe_state_mark(void *data, void *flag)
 	 * the PCI device driver.
 	 */
 	pe->state |= state;
-	eeh_pe_for_each_dev(pe, tmp) {
-		pdev = eeh_dev_to_pci_dev(tmp);
+	eeh_pe_for_each_dev(pe, edev, tmp) {
+		pdev = eeh_dev_to_pci_dev(edev);
 		if (pdev)
 			pdev->error_state = pci_channel_io_frozen;
 	}
-- 
cgit v1.2.3


From ab444ec97e8bd65fff9d489b9a409fc03979268b Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:57 +0800
Subject: powerpc/pci: Partial tree hotplug support

When EEH error happens to one specific PE, the device drivers
of its attached EEH devices (PCI devices) are checked to see
the further action: reset with complete hotplug, or reset without
hotplug. However, that's not enough for those PCI devices whose
drivers can't support EEH, or those PCI devices without driver.
So we need do so-called "partial hotplug" on basis of PCI devices.
In the situation, part of PCI devices of the specific PE are
unplugged and plugged again after PE reset.

The patch changes pcibios_add_pci_devices() so that it can support
full hotplug and so-called "partial" hotplug based on device-tree
or real hardware. It's notable that pci_of_scan.c has been changed
for a bit in order to support the "partial" hotplug based on dev-tree.

Most of the generic code already supports that, we just need to
plumb it properly on our side.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/pci-common.c  |  2 ++
 arch/powerpc/kernel/pci-hotplug.c | 14 ++++++----
 arch/powerpc/kernel/pci_of_scan.c | 56 ++++++++++++++++++++++++++++-----------
 3 files changed, 51 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index f46914a0f33e..7d22a675fe1a 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1462,6 +1462,8 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
 	/* Allocate bus and devices resources */
 	pcibios_allocate_bus_resources(bus);
 	pcibios_claim_one_bus(bus);
+	if (!pci_has_flag(PCI_PROBE_ONLY))
+		pci_assign_unassigned_bus_resources(bus);
 
 	/* Fixup EEH */
 	eeh_add_device_tree_late(bus);
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index fc0831d4971f..c1e17ae68a08 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -71,7 +71,7 @@ EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
  */
 void pcibios_add_pci_devices(struct pci_bus * bus)
 {
-	int slotno, num, mode, pass, max;
+	int slotno, mode, pass, max;
 	struct pci_dev *dev;
 	struct device_node *dn = pci_bus_to_OF_node(bus);
 
@@ -85,11 +85,15 @@ void pcibios_add_pci_devices(struct pci_bus * bus)
 		/* use ofdt-based probe */
 		of_rescan_bus(dn, bus);
 	} else if (mode == PCI_PROBE_NORMAL) {
-		/* use legacy probe */
+		/*
+		 * Use legacy probe. In the partial hotplug case, we
+		 * probably have grandchildren devices unplugged. So
+		 * we don't check the return value from pci_scan_slot() in
+		 * order for fully rescan all the way down to pick them up.
+		 * They can have been removed during partial hotplug.
+		 */
 		slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
-		num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
-		if (!num)
-			return;
+		pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
 		pcibios_setup_bus_devices(bus);
 		max = bus->busn_res.start;
 		for (pass = 0; pass < 2; pass++) {
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 6b0ba5854d99..15d9105323bf 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -230,11 +230,14 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 		return;
 	}
 
-	bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+	bus = pci_find_bus(pci_domain_nr(dev->bus), busrange[0]);
 	if (!bus) {
-		printk(KERN_ERR "Failed to create pci bus for %s\n",
-		       node->full_name);
-		return;
+		bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+		if (!bus) {
+			printk(KERN_ERR "Failed to create pci bus for %s\n",
+			       node->full_name);
+			return;
+		}
 	}
 
 	bus->primary = dev->bus->number;
@@ -292,6 +295,38 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 }
 EXPORT_SYMBOL(of_scan_pci_bridge);
 
+static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
+			    struct device_node *dn)
+{
+	struct pci_dev *dev = NULL;
+	const u32 *reg;
+	int reglen, devfn;
+
+	pr_debug("  * %s\n", dn->full_name);
+	if (!of_device_is_available(dn))
+		return NULL;
+
+	reg = of_get_property(dn, "reg", &reglen);
+	if (reg == NULL || reglen < 20)
+		return NULL;
+	devfn = (reg[0] >> 8) & 0xff;
+
+	/* Check if the PCI device is already there */
+	dev = pci_get_slot(bus, devfn);
+	if (dev) {
+		pci_dev_put(dev);
+		return dev;
+	}
+
+	/* create a new pci_dev for this device */
+	dev = of_create_pci_dev(dn, bus, devfn);
+	if (!dev)
+		return NULL;
+
+	pr_debug("  dev header type: %x\n", dev->hdr_type);
+	return dev;
+}
+
 /**
  * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices
  * @node: device tree node for the PCI bus
@@ -302,8 +337,6 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
 			  int rescan_existing)
 {
 	struct device_node *child;
-	const u32 *reg;
-	int reglen, devfn;
 	struct pci_dev *dev;
 
 	pr_debug("of_scan_bus(%s) bus no %d...\n",
@@ -311,16 +344,7 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
 
 	/* Scan direct children */
 	for_each_child_of_node(node, child) {
-		pr_debug("  * %s\n", child->full_name);
-		if (!of_device_is_available(child))
-			continue;
-		reg = of_get_property(child, "reg", &reglen);
-		if (reg == NULL || reglen < 20)
-			continue;
-		devfn = (reg[0] >> 8) & 0xff;
-
-		/* create a new pci_dev for this device */
-		dev = of_create_pci_dev(child, bus, devfn);
+		dev = of_scan_pci_dev(bus, child);
 		if (!dev)
 			continue;
 		pr_debug("    dev header type: %x\n", dev->hdr_type);
-- 
cgit v1.2.3


From f5c57710dd62dd06f176934a8b4b8accbf00f9f8 Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:58 +0800
Subject: powerpc/eeh: Use partial hotplug for EEH unaware drivers

When EEH error happens to one specific PE, some devices with drivers
supporting EEH won't except hotplug on the device. However, there
might have other deivces without driver, or with driver without EEH
support. For the case, we need do partial hotplug in order to make
sure that the PE becomes absolutely quite during reset. Otherise,
the PE reset might fail and leads to failure of error recovery.

The current code doesn't handle that 'mixed' case properly, it either
uses the error callbacks to the drivers, or tries hotplug, but doesn't
handle a PE (EEH domain) composed of a combination of the two.

The patch intends to support so-called "partial" hotplug for EEH:
Before we do reset, we stop and remove those PCI devices without
EEH sensitive driver. The corresponding EEH devices are not detached
from its PE, but with special flag. After the reset is done, those
EEH devices with the special flag will be scanned one by one.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/eeh.h               |  6 ++-
 arch/powerpc/kernel/eeh.c                    | 30 +++++++++--
 arch/powerpc/kernel/eeh_driver.c             | 74 ++++++++++++++++++++++++++--
 arch/powerpc/kernel/eeh_pe.c                 | 20 +++-----
 arch/powerpc/kernel/eeh_sysfs.c              |  7 +++
 arch/powerpc/platforms/powernv/eeh-powernv.c |  2 +-
 arch/powerpc/platforms/pseries/eeh_pseries.c |  2 +-
 7 files changed, 117 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index e8c411b63caf..f54a60131de5 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -84,7 +84,8 @@ struct eeh_pe {
  * another tree except the currently existing tree of PCI
  * buses and PCI devices
  */
-#define EEH_DEV_IRQ_DISABLED	(1<<0)	/* Interrupt disabled		*/
+#define EEH_DEV_IRQ_DISABLED	(1 << 0)	/* Interrupt disabled	*/
+#define EEH_DEV_DISCONNECTED	(1 << 1)	/* Removing from PE	*/
 
 struct eeh_dev {
 	int mode;			/* EEH mode			*/
@@ -97,6 +98,7 @@ struct eeh_dev {
 	struct pci_controller *phb;	/* Associated PHB		*/
 	struct device_node *dn;		/* Associated device node	*/
 	struct pci_dev *pdev;		/* Associated PCI device	*/
+	struct pci_bus *bus;		/* PCI bus for partial hotplug	*/
 };
 
 static inline struct device_node *eeh_dev_to_of_node(struct eeh_dev *edev)
@@ -197,6 +199,8 @@ struct eeh_pe *eeh_pe_get(struct eeh_dev *edev);
 int eeh_add_to_parent_pe(struct eeh_dev *edev);
 int eeh_rmv_from_parent_pe(struct eeh_dev *edev);
 void eeh_pe_update_time_stamp(struct eeh_pe *pe);
+void *eeh_pe_traverse(struct eeh_pe *root,
+		eeh_traverse_func fn, void *flag);
 void *eeh_pe_dev_traverse(struct eeh_pe *root,
 		eeh_traverse_func fn, void *flag);
 void eeh_pe_restore_bars(struct eeh_pe *pe);
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 56bd4584f61f..a5783f1a7a96 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -900,7 +900,21 @@ void eeh_add_device_late(struct pci_dev *dev)
 		pr_debug("EEH: Already referenced !\n");
 		return;
 	}
-	WARN_ON(edev->pdev);
+
+	/*
+	 * The EEH cache might not be removed correctly because of
+	 * unbalanced kref to the device during unplug time, which
+	 * relies on pcibios_release_device(). So we have to remove
+	 * that here explicitly.
+	 */
+	if (edev->pdev) {
+		eeh_rmv_from_parent_pe(edev);
+		eeh_addr_cache_rmv_dev(edev->pdev);
+		eeh_sysfs_remove_device(edev->pdev);
+
+		edev->pdev = NULL;
+		dev->dev.archdata.edev = NULL;
+	}
 
 	edev->pdev = dev;
 	dev->dev.archdata.edev = edev;
@@ -982,14 +996,24 @@ void eeh_remove_device(struct pci_dev *dev)
 	/* Unregister the device with the EEH/PCI address search system */
 	pr_debug("EEH: Removing device %s\n", pci_name(dev));
 
-	if (!edev || !edev->pdev) {
+	if (!edev || !edev->pdev || !edev->pe) {
 		pr_debug("EEH: Not referenced !\n");
 		return;
 	}
+
+	/*
+	 * During the hotplug for EEH error recovery, we need the EEH
+	 * device attached to the parent PE in order for BAR restore
+	 * a bit later. So we keep it for BAR restore and remove it
+	 * from the parent PE during the BAR resotre.
+	 */
 	edev->pdev = NULL;
 	dev->dev.archdata.edev = NULL;
+	if (!(edev->pe->state & EEH_PE_KEEP))
+		eeh_rmv_from_parent_pe(edev);
+	else
+		edev->mode |= EEH_DEV_DISCONNECTED;
 
-	eeh_rmv_from_parent_pe(edev);
 	eeh_addr_cache_rmv_dev(dev);
 	eeh_sysfs_remove_device(dev);
 }
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 9ef3bbb8580a..9fda75d1f5aa 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -338,6 +338,54 @@ static void *eeh_report_failure(void *data, void *userdata)
 	return NULL;
 }
 
+static void *eeh_rmv_device(void *data, void *userdata)
+{
+	struct pci_driver *driver;
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	int *removed = (int *)userdata;
+
+	/*
+	 * Actually, we should remove the PCI bridges as well.
+	 * However, that's lots of complexity to do that,
+	 * particularly some of devices under the bridge might
+	 * support EEH. So we just care about PCI devices for
+	 * simplicity here.
+	 */
+	if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
+		return NULL;
+	driver = eeh_pcid_get(dev);
+	if (driver && driver->err_handler)
+		return NULL;
+
+	/* Remove it from PCI subsystem */
+	pr_debug("EEH: Removing %s without EEH sensitive driver\n",
+		 pci_name(dev));
+	edev->bus = dev->bus;
+	edev->mode |= EEH_DEV_DISCONNECTED;
+	(*removed)++;
+
+	pci_stop_and_remove_bus_device(dev);
+
+	return NULL;
+}
+
+static void *eeh_pe_detach_dev(void *data, void *userdata)
+{
+	struct eeh_pe *pe = (struct eeh_pe *)data;
+	struct eeh_dev *edev, *tmp;
+
+	eeh_pe_for_each_dev(pe, edev, tmp) {
+		if (!(edev->mode & EEH_DEV_DISCONNECTED))
+			continue;
+
+		edev->mode &= ~(EEH_DEV_DISCONNECTED | EEH_DEV_IRQ_DISABLED);
+		eeh_rmv_from_parent_pe(edev);
+	}
+
+	return NULL;
+}
+
 /**
  * eeh_reset_device - Perform actual reset of a pci slot
  * @pe: EEH PE
@@ -349,8 +397,9 @@ static void *eeh_report_failure(void *data, void *userdata)
  */
 static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 {
+	struct pci_bus *frozen_bus = eeh_pe_bus_get(pe);
 	struct timeval tstamp;
-	int cnt, rc;
+	int cnt, rc, removed = 0;
 
 	/* pcibios will clear the counter; save the value */
 	cnt = pe->freeze_count;
@@ -362,10 +411,11 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	 * devices are expected to be attached soon when calling
 	 * into pcibios_add_pci_devices().
 	 */
-	if (bus) {
-		eeh_pe_state_mark(pe, EEH_PE_KEEP);
+	eeh_pe_state_mark(pe, EEH_PE_KEEP);
+	if (bus)
 		pcibios_remove_pci_devices(bus);
-	}
+	else if (frozen_bus)
+		eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed);
 
 	/* Reset the pci controller. (Asserts RST#; resets config space).
 	 * Reconfigure bridges and devices. Don't try to bring the system
@@ -386,10 +436,24 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	 * potentially weird things happen.
 	 */
 	if (bus) {
+		pr_info("EEH: Sleep 5s ahead of complete hotplug\n");
 		ssleep(5);
+
+		/*
+		 * The EEH device is still connected with its parent
+		 * PE. We should disconnect it so the binding can be
+		 * rebuilt when adding PCI devices.
+		 */
+		eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
 		pcibios_add_pci_devices(bus);
-		eeh_pe_state_clear(pe, EEH_PE_KEEP);
+	} else if (frozen_bus && removed) {
+		pr_info("EEH: Sleep 5s ahead of partial hotplug\n");
+		ssleep(5);
+
+		eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
+		pcibios_add_pci_devices(frozen_bus);
 	}
+	eeh_pe_state_clear(pe, EEH_PE_KEEP);
 
 	pe->tstamp = tstamp;
 	pe->freeze_count = cnt;
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index c8b815e45c8f..2aa955ae01a1 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -149,8 +149,8 @@ static struct eeh_pe *eeh_pe_next(struct eeh_pe *pe,
  * callback returns something other than NULL, or no more PEs
  * to be traversed.
  */
-static void *eeh_pe_traverse(struct eeh_pe *root,
-			eeh_traverse_func fn, void *flag)
+void *eeh_pe_traverse(struct eeh_pe *root,
+		      eeh_traverse_func fn, void *flag)
 {
 	struct eeh_pe *pe;
 	void *ret;
@@ -409,8 +409,8 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
 	int cnt;
 
 	if (!edev->pe) {
-		pr_warning("%s: No PE found for EEH device %s\n",
-			__func__, edev->dn->full_name);
+		pr_debug("%s: No PE found for EEH device %s\n",
+			 __func__, edev->dn->full_name);
 		return -EEXIST;
 	}
 
@@ -728,18 +728,12 @@ static void eeh_restore_device_bars(struct eeh_dev *edev,
  */
 static void *eeh_restore_one_device_bars(void *data, void *flag)
 {
-	struct pci_dev *pdev = NULL;
 	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *pdev = eeh_dev_to_pci_dev(edev);
 	struct device_node *dn = eeh_dev_to_of_node(edev);
 
-	/* Trace the PCI bridge */
-	if (eeh_probe_mode_dev()) {
-		pdev = eeh_dev_to_pci_dev(edev);
-		if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
-                        pdev = NULL;
-        }
-
-	if (pdev)
+	/* Do special restore for bridges */
+	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
 		eeh_restore_bridge_bars(pdev, edev, dn);
 	else
 		eeh_restore_device_bars(edev, dn);
diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c
index e7ae3484918c..61e2a1452131 100644
--- a/arch/powerpc/kernel/eeh_sysfs.c
+++ b/arch/powerpc/kernel/eeh_sysfs.c
@@ -68,6 +68,13 @@ void eeh_sysfs_add_device(struct pci_dev *pdev)
 
 void eeh_sysfs_remove_device(struct pci_dev *pdev)
 {
+	/*
+	 * The parent directory might have been removed. We needn't
+	 * continue for that case.
+	 */
+	if (!pdev->dev.kobj.sd)
+		return;
+
 	device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 969cce73055a..a380428cf9ce 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -114,7 +114,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	 * the root bridge. So it's not reasonable to continue
 	 * the probing.
 	 */
-	if (!dn || !edev)
+	if (!dn || !edev || edev->pe)
 		return 0;
 
 	/* Skip for PCI-ISA bridge */
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index b456b157d33d..0f44f9fe49ac 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -153,7 +153,7 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 
 	/* Retrieve OF node and eeh device */
 	edev = of_node_to_eeh_dev(dn);
-	if (!of_device_is_available(dn))
+	if (edev->pe || !of_device_is_available(dn))
 		return NULL;
 
 	/* Retrieve class/vendor/device IDs */
-- 
cgit v1.2.3


From 4b83bd452f17582c8d1c916568fd28a237a2eb46 Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:59 +0800
Subject: powerpc/eeh: Don't use pci_dev during BAR restore

While restoring BARs for one specific PCI device, the pci_dev
instance should have been released. So it's not reliable to use
the pci_dev instance on restoring BARs. However, we still need
some information (e.g. PCIe capability position, header type) from
the pci_dev instance. So we have to store those information to
EEH device in advance.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/eeh.h               |  8 +++-
 arch/powerpc/kernel/eeh_pe.c                 | 25 ++++++-----
 arch/powerpc/platforms/powernv/eeh-powernv.c | 11 +++++
 arch/powerpc/platforms/pseries/eeh_pseries.c | 63 +++++++++++++++++++++++++++-
 4 files changed, 91 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index f54a60131de5..4199d9943277 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -84,8 +84,11 @@ struct eeh_pe {
  * another tree except the currently existing tree of PCI
  * buses and PCI devices
  */
-#define EEH_DEV_IRQ_DISABLED	(1 << 0)	/* Interrupt disabled	*/
-#define EEH_DEV_DISCONNECTED	(1 << 1)	/* Removing from PE	*/
+#define EEH_DEV_BRIDGE		(1 << 0)	/* PCI bridge		*/
+#define EEH_DEV_ROOT_PORT	(1 << 1)	/* PCIe root port	*/
+#define EEH_DEV_DS_PORT		(1 << 2)	/* Downstream port	*/
+#define EEH_DEV_IRQ_DISABLED	(1 << 3)	/* Interrupt disabled	*/
+#define EEH_DEV_DISCONNECTED	(1 << 4)	/* Removing from PE	*/
 
 struct eeh_dev {
 	int mode;			/* EEH mode			*/
@@ -93,6 +96,7 @@ struct eeh_dev {
 	int config_addr;		/* Config address		*/
 	int pe_config_addr;		/* PE config address		*/
 	u32 config_space[16];		/* Saved PCI config space	*/
+	u8 pcie_cap;			/* Saved PCIe capability	*/
 	struct eeh_pe *pe;		/* Associated PE		*/
 	struct list_head list;		/* Form link list in the PE	*/
 	struct pci_controller *phb;	/* Associated PHB		*/
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 2aa955ae01a1..f9450537e335 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -578,7 +578,7 @@ void eeh_pe_state_clear(struct eeh_pe *pe, int state)
  * blocked on normal path during the stage. So we need utilize
  * eeh operations, which is always permitted.
  */
-static void eeh_bridge_check_link(struct pci_dev *pdev,
+static void eeh_bridge_check_link(struct eeh_dev *edev,
 				  struct device_node *dn)
 {
 	int cap;
@@ -589,16 +589,17 @@ static void eeh_bridge_check_link(struct pci_dev *pdev,
 	 * We only check root port and downstream ports of
 	 * PCIe switches
 	 */
-	if (!pci_is_pcie(pdev) ||
-	    (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT &&
-	     pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM))
+	if (!(edev->mode & (EEH_DEV_ROOT_PORT | EEH_DEV_DS_PORT)))
 		return;
 
-	pr_debug("%s: Check PCIe link for %s ...\n",
-		 __func__, pci_name(pdev));
+	pr_debug("%s: Check PCIe link for %04x:%02x:%02x.%01x ...\n",
+		 __func__, edev->phb->global_number,
+		 edev->config_addr >> 8,
+		 PCI_SLOT(edev->config_addr & 0xFF),
+		 PCI_FUNC(edev->config_addr & 0xFF));
 
 	/* Check slot status */
-	cap = pdev->pcie_cap;
+	cap = edev->pcie_cap;
 	eeh_ops->read_config(dn, cap + PCI_EXP_SLTSTA, 2, &val);
 	if (!(val & PCI_EXP_SLTSTA_PDS)) {
 		pr_debug("  No card in the slot (0x%04x) !\n", val);
@@ -652,8 +653,7 @@ static void eeh_bridge_check_link(struct pci_dev *pdev,
 #define BYTE_SWAP(OFF)	(8*((OFF)/4)+3-(OFF))
 #define SAVED_BYTE(OFF)	(((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
 
-static void eeh_restore_bridge_bars(struct pci_dev *pdev,
-				    struct eeh_dev *edev,
+static void eeh_restore_bridge_bars(struct eeh_dev *edev,
 				    struct device_node *dn)
 {
 	int i;
@@ -679,7 +679,7 @@ static void eeh_restore_bridge_bars(struct pci_dev *pdev,
 	eeh_ops->write_config(dn, PCI_COMMAND, 4, edev->config_space[1]);
 
 	/* Check the PCIe link is ready */
-	eeh_bridge_check_link(pdev, dn);
+	eeh_bridge_check_link(edev, dn);
 }
 
 static void eeh_restore_device_bars(struct eeh_dev *edev,
@@ -729,12 +729,11 @@ static void eeh_restore_device_bars(struct eeh_dev *edev,
 static void *eeh_restore_one_device_bars(void *data, void *flag)
 {
 	struct eeh_dev *edev = (struct eeh_dev *)data;
-	struct pci_dev *pdev = eeh_dev_to_pci_dev(edev);
 	struct device_node *dn = eeh_dev_to_of_node(edev);
 
 	/* Do special restore for bridges */
-	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
-		eeh_restore_bridge_bars(pdev, edev, dn);
+	if (edev->mode & EEH_DEV_BRIDGE)
+		eeh_restore_bridge_bars(edev, dn);
 	else
 		eeh_restore_device_bars(edev, dn);
 
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index a380428cf9ce..4361a5c7f3ab 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -124,6 +124,17 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	/* Initialize eeh device */
 	edev->class_code	= dev->class;
 	edev->mode		= 0;
+	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+		edev->mode |= EEH_DEV_BRIDGE;
+	if (pci_is_pcie(dev)) {
+		edev->pcie_cap = pci_pcie_cap(dev);
+
+		if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
+			edev->mode |= EEH_DEV_ROOT_PORT;
+		else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)
+			edev->mode |= EEH_DEV_DS_PORT;
+	}
+
 	edev->config_addr	= ((dev->bus->number << 8) | dev->devfn);
 	edev->pe_config_addr	= phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff);
 
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 0f44f9fe49ac..9e80f0af311f 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -133,6 +133,48 @@ static int pseries_eeh_init(void)
 	return 0;
 }
 
+static int pseries_eeh_cap_start(struct device_node *dn)
+{
+	struct pci_dn *pdn = PCI_DN(dn);
+	u32 status;
+
+	if (!pdn)
+		return 0;
+
+	rtas_read_config(pdn, PCI_STATUS, 2, &status);
+	if (!(status & PCI_STATUS_CAP_LIST))
+		return 0;
+
+	return PCI_CAPABILITY_LIST;
+}
+
+
+static int pseries_eeh_find_cap(struct device_node *dn, int cap)
+{
+	struct pci_dn *pdn = PCI_DN(dn);
+	int pos = pseries_eeh_cap_start(dn);
+	int cnt = 48;	/* Maximal number of capabilities */
+	u32 id;
+
+	if (!pos)
+		return 0;
+
+        while (cnt--) {
+		rtas_read_config(pdn, pos, 1, &pos);
+		if (pos < 0x40)
+			break;
+		pos &= ~3;
+		rtas_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
+		if (id == 0xff)
+			break;
+		if (id == cap)
+			return pos;
+		pos += PCI_CAP_LIST_NEXT;
+	}
+
+	return 0;
+}
+
 /**
  * pseries_eeh_of_probe - EEH probe on the given device
  * @dn: OF node
@@ -146,8 +188,10 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 {
 	struct eeh_dev *edev;
 	struct eeh_pe pe;
+	struct pci_dn *pdn = PCI_DN(dn);
 	const u32 *class_code, *vendor_id, *device_id;
 	const u32 *regs;
+	u32 pcie_flags;
 	int enable = 0;
 	int ret;
 
@@ -167,9 +211,26 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 	if (dn->type && !strcmp(dn->type, "isa"))
 		return NULL;
 
-	/* Update class code and mode of eeh device */
+	/*
+	 * Update class code and mode of eeh device. We need
+	 * correctly reflects that current device is root port
+	 * or PCIe switch downstream port.
+	 */
 	edev->class_code = *class_code;
+	edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP);
 	edev->mode = 0;
+	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		edev->mode |= EEH_DEV_BRIDGE;
+		if (edev->pcie_cap) {
+			rtas_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
+					 2, &pcie_flags);
+			pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
+			if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
+				edev->mode |= EEH_DEV_ROOT_PORT;
+			else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM)
+				edev->mode |= EEH_DEV_DS_PORT;
+		}
+	}
 
 	/* Retrieve the device address */
 	regs = of_get_property(dn, "reg", NULL);
-- 
cgit v1.2.3


From 91150af3adf67463c4ca7d72d4fe1a84da37792c Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:25:00 +0800
Subject: powerpc/eeh: Fix unbalanced enable for IRQ

The patch fixes following issue:

Unbalanced enable for IRQ 23
------------[ cut here ]------------
WARNING: at kernel/irq/manage.c:437
:
NIP [c00000000016de8c] .__enable_irq+0x11c/0x140
LR [c00000000016de88] .__enable_irq+0x118/0x140
Call Trace:
[c000003ea1f23880] [c00000000016de88] .__enable_irq+0x118/0x140 (unreliable)
[c000003ea1f23910] [c00000000016df08] .enable_irq+0x58/0xa0
[c000003ea1f239a0] [c0000000000388b4] .eeh_enable_irq+0xc4/0xe0
[c000003ea1f23a30] [c000000000038a28] .eeh_report_reset+0x78/0x130
[c000003ea1f23ac0] [c000000000037508] .eeh_pe_dev_traverse+0x98/0x170
[c000003ea1f23b60] [c0000000000391ac] .eeh_handle_normal_event+0x2fc/0x3d0
[c000003ea1f23bf0] [c000000000039538] .eeh_handle_event+0x2b8/0x2c0
[c000003ea1f23c90] [c000000000039600] .eeh_event_handler+0xc0/0x170
[c000003ea1f23d30] [c0000000000da9a0] .kthread+0xf0/0x100
[c000003ea1f23e30] [c00000000000a1dc] .ret_from_kernel_thread+0x5c/0x80

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/eeh_driver.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 9fda75d1f5aa..36bed5a12750 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -143,10 +143,14 @@ static void eeh_disable_irq(struct pci_dev *dev)
 static void eeh_enable_irq(struct pci_dev *dev)
 {
 	struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
+	struct irq_desc *desc;
 
 	if ((edev->mode) & EEH_DEV_IRQ_DISABLED) {
 		edev->mode &= ~EEH_DEV_IRQ_DISABLED;
-		enable_irq(dev->irq);
+
+		desc = irq_to_desc(dev->irq);
+		if (desc && desc->depth > 0)
+			enable_irq(dev->irq);
 	}
 }
 
-- 
cgit v1.2.3


From ab55d2187da27414f78056810713c92f9a4350c2 Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:25:01 +0800
Subject: powerpc/eeh: Introdce flag to protect sysfs

The patch introduces flag EEH_DEV_SYSFS to keep track that the sysfs
entries for the corresponding EEH device (then PCI device) has been
added or removed, in order to avoid race condition.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/eeh.h               |  2 ++
 arch/powerpc/kernel/eeh.c                    |  2 ++
 arch/powerpc/kernel/eeh_sysfs.c              | 16 +++++++++++++++-
 arch/powerpc/platforms/powernv/eeh-powernv.c |  4 ++--
 arch/powerpc/platforms/pseries/eeh_pseries.c |  2 +-
 5 files changed, 22 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 4199d9943277..d3e5e9bc8f94 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -90,6 +90,8 @@ struct eeh_pe {
 #define EEH_DEV_IRQ_DISABLED	(1 << 3)	/* Interrupt disabled	*/
 #define EEH_DEV_DISCONNECTED	(1 << 4)	/* Removing from PE	*/
 
+#define EEH_DEV_SYSFS		(1 << 8)	/* Sysfs created        */
+
 struct eeh_dev {
 	int mode;			/* EEH mode			*/
 	int class_code;			/* Class code of the device	*/
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index a5783f1a7a96..ea9414c8088d 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -911,6 +911,7 @@ void eeh_add_device_late(struct pci_dev *dev)
 		eeh_rmv_from_parent_pe(edev);
 		eeh_addr_cache_rmv_dev(edev->pdev);
 		eeh_sysfs_remove_device(edev->pdev);
+		edev->mode &= ~EEH_DEV_SYSFS;
 
 		edev->pdev = NULL;
 		dev->dev.archdata.edev = NULL;
@@ -1016,6 +1017,7 @@ void eeh_remove_device(struct pci_dev *dev)
 
 	eeh_addr_cache_rmv_dev(dev);
 	eeh_sysfs_remove_device(dev);
+	edev->mode &= ~EEH_DEV_SYSFS;
 }
 
 static int proc_eeh_show(struct seq_file *m, void *v)
diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c
index 61e2a1452131..5d753d4f2c75 100644
--- a/arch/powerpc/kernel/eeh_sysfs.c
+++ b/arch/powerpc/kernel/eeh_sysfs.c
@@ -56,26 +56,40 @@ EEH_SHOW_ATTR(eeh_pe_config_addr,  pe_config_addr,  "0x%x");
 
 void eeh_sysfs_add_device(struct pci_dev *pdev)
 {
+	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
 	int rc=0;
 
+	if (edev && (edev->mode & EEH_DEV_SYSFS))
+		return;
+
 	rc += device_create_file(&pdev->dev, &dev_attr_eeh_mode);
 	rc += device_create_file(&pdev->dev, &dev_attr_eeh_config_addr);
 	rc += device_create_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
 
 	if (rc)
 		printk(KERN_WARNING "EEH: Unable to create sysfs entries\n");
+	else if (edev)
+		edev->mode |= EEH_DEV_SYSFS;
 }
 
 void eeh_sysfs_remove_device(struct pci_dev *pdev)
 {
+	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
+
 	/*
 	 * The parent directory might have been removed. We needn't
 	 * continue for that case.
 	 */
-	if (!pdev->dev.kobj.sd)
+	if (!pdev->dev.kobj.sd) {
+		if (edev)
+			edev->mode &= ~EEH_DEV_SYSFS;
 		return;
+	}
 
 	device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
+
+	if (edev)
+		edev->mode &= ~EEH_DEV_SYSFS;
 }
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 4361a5c7f3ab..79663d26e6ea 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -122,8 +122,8 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 		return 0;
 
 	/* Initialize eeh device */
-	edev->class_code	= dev->class;
-	edev->mode		= 0;
+	edev->class_code = dev->class;
+	edev->mode	&= 0xFFFFFF00;
 	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
 		edev->mode |= EEH_DEV_BRIDGE;
 	if (pci_is_pcie(dev)) {
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 9e80f0af311f..7fbc25b1813f 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -218,7 +218,7 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 	 */
 	edev->class_code = *class_code;
 	edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP);
-	edev->mode = 0;
+	edev->mode &= 0xFFFFFF00;
 	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
 		edev->mode |= EEH_DEV_BRIDGE;
 		if (edev->pcie_cap) {
-- 
cgit v1.2.3


From ad92c615975a57c4b206c5c99f77a0bf22b373c4 Mon Sep 17 00:00:00 2001
From: Denis Kirjanov <kda@linux-powerpc.org>
Date: Tue, 23 Jul 2013 15:28:03 +0400
Subject: powerpc/pseries: Fix a typo in pSeries_lpar_hpte_insert()

Commit 801eb73f45371accc78ca9d6d22d647eeb722c11 introduced
a bug while checking PTE flags. We have to drop the _PAGE_COHERENT flag
when __PAGE_NO_CACHE is set and the cache update policy is not write-through
(i.e. _PAGE_WRITETHRU is not set)

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
CC:  Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/lpar.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 02d6e21619bb..8bad880bd177 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -146,7 +146,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	flags = 0;
 
 	/* Make pHyp happy */
-	if ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU))
+	if ((rflags & _PAGE_NO_CACHE) && !(rflags & _PAGE_WRITETHRU))
 		hpte_r &= ~_PAGE_COHERENT;
 	if (firmware_has_feature(FW_FEATURE_XCMO) && !(hpte_r & HPTE_R_N))
 		flags |= H_COALESCE_CAND;
-- 
cgit v1.2.3


From 83383b73ad5fbf52ea4b77aed900a927875f2529 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Wed, 3 Jul 2013 13:50:03 +0530
Subject: powerpc/mm: Fix fallthrough bug in hpte_decode

We should not fallthrough different case statements in hpte_decode. Add
break statement to break out of the switch. The regression is introduced by
dcda287a9b26309ae43a091d0ecde16f8f61b4c0 "powerpc/mm: Simplify hpte_decode"

Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/hash_native_64.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 3f0c30ae4791..0530ff78c023 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -554,6 +554,7 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
 			seg_off |= vpi << shift;
 		}
 		*vpn = vsid << (SID_SHIFT - VPN_SHIFT) | seg_off >> VPN_SHIFT;
+		break;
 	case MMU_SEGSIZE_1T:
 		/* We only have 40 - 23 bits of seg_off in avpn */
 		seg_off = (avpn & 0x1ffff) << 23;
@@ -563,6 +564,7 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
 			seg_off |= vpi << shift;
 		}
 		*vpn = vsid << (SID_SHIFT_1T - VPN_SHIFT) | seg_off >> VPN_SHIFT;
+		break;
 	default:
 		*vpn = size = 0;
 	}
-- 
cgit v1.2.3


From de640959b63ad437c21f2a217f25332c4ea863cb Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Thu, 4 Jul 2013 10:34:45 +0530
Subject: powerpc/mm: Use the correct SLB(LLP) encoding in tlbie instruction

The sllp value is stored in mmu_psize_defs in such a way that we can easily OR
the value to get the operand for slbmte instruction. ie, the L and LP bits are
not contiguous. Decode the bits and use them correctly in tlbie.
regression is introduced by 1f6aaaccb1b3af8613fe45781c1aefee2ae8c6b3
"powerpc: Update tlbie/tlbiel as per ISA doc"

Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/hash_native_64.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 0530ff78c023..c33d939120c9 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -43,6 +43,7 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize)
 {
 	unsigned long va;
 	unsigned int penc;
+	unsigned long sllp;
 
 	/*
 	 * We need 14 to 65 bits of va for a tlibe of 4K page
@@ -64,7 +65,9 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize)
 		/* clear out bits after (52) [0....52.....63] */
 		va &= ~((1ul << (64 - 52)) - 1);
 		va |= ssize << 8;
-		va |= mmu_psize_defs[apsize].sllp << 6;
+		sllp = ((mmu_psize_defs[apsize].sllp & SLB_VSID_L) >> 6) |
+			((mmu_psize_defs[apsize].sllp & SLB_VSID_LP) >> 4);
+		va |= sllp << 5;
 		asm volatile(ASM_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0), %2)
 			     : : "r" (va), "r"(0), "i" (CPU_FTR_ARCH_206)
 			     : "memory");
@@ -98,6 +101,7 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize)
 {
 	unsigned long va;
 	unsigned int penc;
+	unsigned long sllp;
 
 	/* VPN_SHIFT can be atmost 12 */
 	va = vpn << VPN_SHIFT;
@@ -113,7 +117,9 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize)
 		/* clear out bits after(52) [0....52.....63] */
 		va &= ~((1ul << (64 - 52)) - 1);
 		va |= ssize << 8;
-		va |= mmu_psize_defs[apsize].sllp << 6;
+		sllp = ((mmu_psize_defs[apsize].sllp & SLB_VSID_L) >> 6) |
+			((mmu_psize_defs[apsize].sllp & SLB_VSID_LP) >> 4);
+		va |= sllp << 5;
 		asm volatile(".long 0x7c000224 | (%0 << 11) | (0 << 21)"
 			     : : "r"(va) : "memory");
 		break;
-- 
cgit v1.2.3


From 679750054ae8129a536734bccf526ff6da35376a Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bhelgaas@google.com>
Date: Tue, 2 Jul 2013 12:20:03 -0600
Subject: powerpc/powernv: Mark pnv_pci_init_ioda2_phb() as __init

Mark pnv_pci_init_ioda2_phb() as __init.  It is called only from an
init function (pnv_pci_init()), and it calls an init function
(pnv_pci_init_ioda_phb()):

    pnv_pci_init                # init
      pnv_pci_init_ioda2_phb    # non-init
	pnv_pci_init_ioda_phb   # init

This should fix a section mismatch warning.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 49b57b9f835d..d8140b125e62 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1266,7 +1266,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
 }
 
-void pnv_pci_init_ioda2_phb(struct device_node *np)
+void __init pnv_pci_init_ioda2_phb(struct device_node *np)
 {
 	pnv_pci_init_ioda_phb(np, 0, PNV_PHB_IODA2);
 }
-- 
cgit v1.2.3


From 7689bdcab1dca061c4c91f0e1703cef1b7b67e71 Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Mon, 10 Jun 2013 11:23:28 +0530
Subject: powerpc/perf: Ignore separate BHRB privilege state filter request

Completely ignore BHRB privilege state filter request as we are
already configuring that with privilege state filtering attribute
for the accompanying PMU event. This would help achieve cleaner
user space interaction for BHRB.

This patch fixes a situation like this

Before patch:-
------------
./perf record -j any -e branch-misses:k ls
Error:
The sys_perf_event_open() syscall returned with 95 (Operation not
supported) for event (branch-misses:k).
/bin/dmesg may provide additional information.
No CONFIG_PERF_EVENTS=y kernel support configured?

Here 'perf record' actually copies over ':k' filter request into BHRB
privilege state filter config and our previous check in kernel would
fail that.

After patch:-
-------------
./perf record -j any -e branch-misses:k ls
perf  perf.data  perf.data.old  test-mmap-ring
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (~102 samples)]

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/perf/power8-pmu.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index 09def196f5c4..7466374d2787 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -561,18 +561,13 @@ static int power8_generic_events[] = {
 static u64 power8_bhrb_filter_map(u64 branch_sample_type)
 {
 	u64 pmu_bhrb_filter = 0;
-	u64 br_privilege = branch_sample_type & ONLY_PLM;
 
-	/* BHRB and regular PMU events share the same prvillege state
+	/* BHRB and regular PMU events share the same privilege state
 	 * filter configuration. BHRB is always recorded along with a
-	 * regular PMU event. So privilege state filter criteria for BHRB
-	 * and the companion PMU events has to be the same. As a default
-	 * "perf record" tool sets all privillege bits ON when no filter
-	 * criteria is provided in the command line. So as along as all
-	 * privillege bits are ON or they are OFF, we are good to go.
+	 * regular PMU event. As the privilege state filter is handled
+	 * in the basic PMC configuration of the accompanying regular
+	 * PMU event, we ignore any separate BHRB specific request.
 	 */
-	if ((br_privilege != 7) && (br_privilege != 0))
-		return -1;
 
 	/* No branch filter requested */
 	if (branch_sample_type & PERF_SAMPLE_BRANCH_ANY)
-- 
cgit v1.2.3


From ff3d79dc12c2ed38483f6c1e0f26fde430f27c9d Mon Sep 17 00:00:00 2001
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Date: Mon, 10 Jun 2013 11:23:29 +0530
Subject: powerpc/perf: BHRB filter configuration should follow the task

When the task moves around the system, the corresponding cpuhw
per cpu strcuture should be popullated with the BHRB filter
request value so that PMU could be configured appropriately with
that during the next call into power_pmu_enable().

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/perf/core-book3s.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index a3985aee77fe..24a45f91c65f 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1252,8 +1252,11 @@ nocheck:
 
 	ret = 0;
  out:
-	if (has_branch_stack(event))
+	if (has_branch_stack(event)) {
 		power_pmu_bhrb_enable(event);
+		cpuhw->bhrb_filter = ppmu->bhrb_filter_map(
+					event->attr.branch_sample_type);
+	}
 
 	perf_pmu_enable(event->pmu);
 	local_irq_restore(flags);
-- 
cgit v1.2.3