From 0cfcccb4687862a34eb609d16e75b39b6cb54c80 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Fri, 13 Oct 2006 10:07:01 -0500 Subject: [POWERPC] Add mktree utility to arch/powerpc/boot This patch adds the mktree program that is needed to post process zImage wrappers for various PowerPC 4xx boards Signed-off-by: Josh Boyer Signed-off-by: Paul Mackerras --- arch/powerpc/boot/mktree.c | 152 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 152 insertions(+) create mode 100644 arch/powerpc/boot/mktree.c (limited to 'arch/powerpc/boot/mktree.c') diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c new file mode 100644 index 000000000000..4cb892993651 --- /dev/null +++ b/arch/powerpc/boot/mktree.c @@ -0,0 +1,152 @@ +/* + * Makes a tree bootable image for IBM Evaluation boards. + * Basically, just take a zImage, skip the ELF header, and stuff + * a 32 byte header on the front. + * + * We use htonl, which is a network macro, to make sure we're doing + * The Right Thing on an LE machine. It's non-obvious, but it should + * work on anything BSD'ish. + */ + +#include +#include +#include +#include +#include +#include +#include +#ifdef __sun__ +#include +#else +#include +#endif + +/* This gets tacked on the front of the image. There are also a few + * bytes allocated after the _start label used by the boot rom (see + * head.S for details). + */ +typedef struct boot_block { + uint32_t bb_magic; /* 0x0052504F */ + uint32_t bb_dest; /* Target address of the image */ + uint32_t bb_num_512blocks; /* Size, rounded-up, in 512 byte blks */ + uint32_t bb_debug_flag; /* Run debugger or image after load */ + uint32_t bb_entry_point; /* The image address to start */ + uint32_t bb_checksum; /* 32 bit checksum including header */ + uint32_t reserved[2]; +} boot_block_t; + +#define IMGBLK 512 +char tmpbuf[IMGBLK]; + +int main(int argc, char *argv[]) +{ + int in_fd, out_fd; + int nblks, i; + uint cksum, *cp; + struct stat st; + boot_block_t bt; + + if (argc < 3) { + fprintf(stderr, "usage: %s [entry-point]\n",argv[0]); + exit(1); + } + + if (stat(argv[1], &st) < 0) { + perror("stat"); + exit(2); + } + + nblks = (st.st_size + IMGBLK) / IMGBLK; + + bt.bb_magic = htonl(0x0052504F); + + /* If we have the optional entry point parameter, use it */ + if (argc == 4) + bt.bb_dest = bt.bb_entry_point = htonl(strtoul(argv[3], NULL, 0)); + else + bt.bb_dest = bt.bb_entry_point = htonl(0x500000); + + /* We know these from the linker command. + * ...and then move it up into memory a little more so the + * relocation can happen. + */ + bt.bb_num_512blocks = htonl(nblks); + bt.bb_debug_flag = 0; + + bt.bb_checksum = 0; + + /* To be neat and tidy :-). + */ + bt.reserved[0] = 0; + bt.reserved[1] = 0; + + if ((in_fd = open(argv[1], O_RDONLY)) < 0) { + perror("zImage open"); + exit(3); + } + + if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) { + perror("bootfile open"); + exit(3); + } + + cksum = 0; + cp = (void *)&bt; + for (i=0; i 0) { + if (read(in_fd, tmpbuf, IMGBLK) < 0) { + perror("zImage read"); + exit(5); + } + cp = (uint *)tmpbuf; + for (i=0; i