From 616257669e1aa28628e84914810d0d94a6967653 Mon Sep 17 00:00:00 2001 From: Jonas Bonn Date: Sat, 4 Jun 2011 22:45:16 +0300 Subject: OpenRISC: Miscellaneous Adds README file, TODO list, and a couple of other pieces that didn't seem to fit into any other patch. Signed-off-by: Jonas Bonn Reviewed-by: Arnd Bergmann --- arch/openrisc/README.openrisc | 99 ++++++++++++++++++++++++++++++++++++++ arch/openrisc/TODO.openrisc | 16 ++++++ arch/openrisc/kernel/asm-offsets.c | 70 +++++++++++++++++++++++++++ arch/openrisc/kernel/or32_ksyms.c | 46 ++++++++++++++++++ 4 files changed, 231 insertions(+) create mode 100644 arch/openrisc/README.openrisc create mode 100644 arch/openrisc/TODO.openrisc create mode 100644 arch/openrisc/kernel/asm-offsets.c create mode 100644 arch/openrisc/kernel/or32_ksyms.c (limited to 'arch/openrisc') diff --git a/arch/openrisc/README.openrisc b/arch/openrisc/README.openrisc new file mode 100644 index 000000000000..c9f7edf2b9a2 --- /dev/null +++ b/arch/openrisc/README.openrisc @@ -0,0 +1,99 @@ +OpenRISC Linux +============== + +This is a port of Linux to the OpenRISC class of microprocessors; the initial +target architecture, specifically, is the 32-bit OpenRISC 1000 family (or1k). + +For information about OpenRISC processors and ongoing development: + + website http://openrisc.net + +For more information about Linux on OpenRISC, please contact South Pole AB. + + email: info@southpole.se + + website: http://southpole.se + http://southpoleconsulting.com + +--------------------------------------------------------------------- + +Build instructions for OpenRISC toolchain and Linux +=================================================== + +In order to build and run Linux for OpenRISC, you'll need at least a basic +toolchain and, perhaps, the architectural simulator. Steps to get these bits +in place are outlined here. + +1) The toolchain can be obtained from openrisc.net. Instructions for building +a toolchain can be found at: + +http://openrisc.net/toolchain-build.html + +2) or1ksim (optional) + +or1ksim is the architectural simulator which will allow you to actually run +your OpenRISC Linux kernel if you don't have an OpenRISC processor at hand. + + git clone git://openrisc.net/jonas/or1ksim-svn + + cd or1ksim + ./configure --prefix=$OPENRISC_PREFIX + make + make install + +3) Linux kernel + +Build the kernel as usual + + make ARCH=openrisc defconfig + make ARCH=openrisc + +4) Run in architectural simulator + +Grab the or1ksim platform configuration file (from the or1ksim source) and +together with your freshly built vmlinux, run your kernel with the following +incantation: + + sim -f arch/openrisc/or1ksim.cfg vmlinux + +--------------------------------------------------------------------- + +Terminology +=========== + +In the code, the following particles are used on symbols to limit the scope +to more or less specific processor implementations: + +openrisc: the OpenRISC class of processors +or1k: the OpenRISC 1000 family of processors +or1200: the OpenRISC 1200 processor + +--------------------------------------------------------------------- + +History +======== + +18. 11. 2003 Matjaz Breskvar (phoenix@bsemi.com) + initial port of linux to OpenRISC/or32 architecture. + all the core stuff is implemented and seams usable. + +08. 12. 2003 Matjaz Breskvar (phoenix@bsemi.com) + complete change of TLB miss handling. + rewrite of exceptions handling. + fully functional sash-3.6 in default initrd. + a much improved version with changes all around. + +10. 04. 2004 Matjaz Breskvar (phoenix@bsemi.com) + alot of bugfixes all over. + ethernet support, functional http and telnet servers. + running many standard linux apps. + +26. 06. 2004 Matjaz Breskvar (phoenix@bsemi.com) + port to 2.6.x + +30. 11. 2004 Matjaz Breskvar (phoenix@bsemi.com) + lots of bugfixes and enhancments. + added opencores framebuffer driver. + +09. 10. 2010 Jonas Bonn (jonas@southpole.se) + major rewrite to bring up to par with upstream Linux 2.6.36 diff --git a/arch/openrisc/TODO.openrisc b/arch/openrisc/TODO.openrisc new file mode 100644 index 000000000000..acfeef9c58e3 --- /dev/null +++ b/arch/openrisc/TODO.openrisc @@ -0,0 +1,16 @@ +The OpenRISC Linux port is fully functional and has been tracking upstream +since 2.6.35. There are, however, remaining items to be completed within +the coming months. Here's a list of known-to-be-less-than-stellar items +that are due for investigation shortly, i.e. our TODO list: + +-- Implement the rest of the DMA API... dma_map_sg, etc. + +-- Consolidate usage of memblock and bootmem... move everything over to + memblock. + +-- Finish the renaming cleanup... there are references to or32 in the code + which was an older name for the architecture. The name we've settled on is + or1k and this change is slowly trickling through the stack. For the time + being, or32 is equivalent to or1k. + +-- Implement optimized version of memcpy and memset diff --git a/arch/openrisc/kernel/asm-offsets.c b/arch/openrisc/kernel/asm-offsets.c new file mode 100644 index 000000000000..1a242a0d7583 --- /dev/null +++ b/arch/openrisc/kernel/asm-offsets.c @@ -0,0 +1,70 @@ +/* + * OpenRISC asm-offsets.c + * + * Linux architectural port borrowing liberally from similar works of + * others. All original copyrights apply as per the original source + * declaration. + * + * Modifications for the OpenRISC architecture: + * Copyright (C) 2003 Matjaz Breskvar + * Copyright (C) 2010-2011 Jonas Bonn + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DEFINE(sym, val) \ + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + +#define BLANK() asm volatile("\n->" : : ) + +int main(void) +{ + /* offsets into the task_struct */ + DEFINE(TASK_STATE, offsetof(struct task_struct, state)); + DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags)); + DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace)); + DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); + DEFINE(TASK_MM, offsetof(struct task_struct, mm)); + DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); + + /* offsets into thread_info */ + DEFINE(TI_TASK, offsetof(struct thread_info, task)); + DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); + DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); + DEFINE(TI_KSP, offsetof(struct thread_info, ksp)); + + DEFINE(PT_SIZE, sizeof(struct pt_regs)); + + /* Interrupt register frame */ + DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD); + DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs)); + + DEFINE(NUM_USER_SEGMENTS, TASK_SIZE >> 28); + return 0; +} diff --git a/arch/openrisc/kernel/or32_ksyms.c b/arch/openrisc/kernel/or32_ksyms.c new file mode 100644 index 000000000000..83ccf7c0c58d --- /dev/null +++ b/arch/openrisc/kernel/or32_ksyms.c @@ -0,0 +1,46 @@ +/* + * OpenRISC or32_ksyms.c + * + * Linux architectural port borrowing liberally from similar works of + * others. All original copyrights apply as per the original source + * declaration. + * + * Modifications for the OpenRISC architecture: + * Copyright (C) 2003 Matjaz Breskvar + * Copyright (C) 2010-2011 Jonas Bonn + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define DECLARE_EXPORT(name) extern void name(void); EXPORT_SYMBOL(name) + +/* compiler generated symbols */ +DECLARE_EXPORT(__udivsi3); +DECLARE_EXPORT(__divsi3); +DECLARE_EXPORT(__umodsi3); +DECLARE_EXPORT(__modsi3); +DECLARE_EXPORT(__muldi3); +DECLARE_EXPORT(__ashrdi3); +DECLARE_EXPORT(__ashldi3); +DECLARE_EXPORT(__lshrdi3); + +EXPORT_SYMBOL(__copy_tofrom_user); -- cgit v1.2.3