From e545a6140b698b2494daf0b32107bdcc5e901390 Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Sun, 7 Sep 2008 16:57:22 +0200 Subject: kernel/cpu.c: create a CPU_STARTING cpu_chain notifier Right now, there is no notifier that is called on a new cpu, before the new cpu begins processing interrupts/softirqs. Various kernel function would need that notification, e.g. kvm works around by calling smp_call_function_single(), rcu polls cpu_online_map. The patch adds a CPU_STARTING notification. It also adds a helper function that sends the message to all cpu_chain handlers. Tested on x86-64. All other archs are untested. Especially on sparc, I'm not sure if I got it right. Signed-off-by: Manfred Spraul Signed-off-by: Ingo Molnar --- arch/mips/kernel/smp.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 4410f172b8ab..7b59cfb7e602 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -121,6 +121,8 @@ asmlinkage __cpuinit void start_secondary(void) cpu = smp_processor_id(); cpu_data[cpu].udelay_val = loops_per_jiffy; + notify_cpu_starting(cpu); + mp_ops->smp_finish(); set_cpu_sibling_map(cpu); -- cgit v1.2.3 From a83479545d0e693da0886fd28d041d3a5c1bc966 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Mon, 15 Sep 2008 20:50:54 -0400 Subject: [MIPS] VR41xx: unsigned irq cannot be negative Signed-off-by: Roel Kluin Acked-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/vr41xx/common/irq.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c index cba36a247e32..92dd1a0ca352 100644 --- a/arch/mips/vr41xx/common/irq.c +++ b/arch/mips/vr41xx/common/irq.c @@ -72,6 +72,7 @@ static void irq_dispatch(unsigned int irq) cascade = irq_cascade + irq; if (cascade->get_irq != NULL) { unsigned int source_irq = irq; + int ret; desc = irq_desc + source_irq; if (desc->chip->mask_ack) desc->chip->mask_ack(source_irq); @@ -79,8 +80,9 @@ static void irq_dispatch(unsigned int irq) desc->chip->mask(source_irq); desc->chip->ack(source_irq); } - irq = cascade->get_irq(irq); - if (irq < 0) + ret = cascade->get_irq(irq); + irq = ret; + if (ret < 0) atomic_inc(&irq_err_count); else irq_dispatch(irq); -- cgit v1.2.3 From b80a1b80818cd83c6c2109081b43551e7af72c84 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 20 Sep 2008 17:20:04 +0200 Subject: [MIPS] Fix 64-bit IP checksum code Use unsigned loads to avoid possible misscalculation of IP checksums. This bug was instruced in f761106cd728bcf65b7fe161b10221ee00cf7132 (lmo) / ed99e2bc1dc5dc54eb5a019f4975562dbef20103 (kernel.org). [Original fix by Atsushi. Improved instruction scheduling and fix for unaligned unsigned load by me -- Ralf] Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/lib/csum_partial.S | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index 8d7784122c14..edac9892c51a 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -39,12 +39,14 @@ #ifdef USE_DOUBLE #define LOAD ld +#define LOAD32 lwu #define ADD daddu #define NBYTES 8 #else #define LOAD lw +#define LOAD32 lw #define ADD addu #define NBYTES 4 @@ -60,6 +62,14 @@ ADD sum, v1; \ .set pop +#define ADDC32(sum,reg) \ + .set push; \ + .set noat; \ + addu sum, reg; \ + sltu v1, sum, reg; \ + addu sum, v1; \ + .set pop + #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \ LOAD _t0, (offset + UNIT(0))(src); \ LOAD _t1, (offset + UNIT(1))(src); \ @@ -132,7 +142,7 @@ LEAF(csum_partial) beqz t8, .Lqword_align andi t8, src, 0x8 - lw t0, 0x00(src) + LOAD32 t0, 0x00(src) LONG_SUBU a1, a1, 0x4 ADDC(sum, t0) PTR_ADDU src, src, 0x4 @@ -211,7 +221,7 @@ LEAF(csum_partial) LONG_SRL t8, t8, 0x2 .Lend_words: - lw t0, (src) + LOAD32 t0, (src) LONG_SUBU t8, t8, 0x1 ADDC(sum, t0) .set reorder /* DADDI_WAR */ @@ -230,6 +240,9 @@ LEAF(csum_partial) /* Still a full word to go */ ulw t1, (src) PTR_ADDIU src, 4 +#ifdef USE_DOUBLE + dsll t1, t1, 32 /* clear lower 32bit */ +#endif ADDC(sum, t1) 1: move t1, zero @@ -280,7 +293,7 @@ LEAF(csum_partial) 1: .set reorder /* Add the passed partial csum. */ - ADDC(sum, a2) + ADDC32(sum, a2) jr ra .set noreorder END(csum_partial) @@ -681,7 +694,7 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) .set pop 1: .set reorder - ADDC(sum, psum) + ADDC32(sum, psum) jr ra .set noreorder -- cgit v1.2.3 From 6657fe0a0281e06ff46eb42bc18ecb68d8b14b27 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 9 Sep 2008 15:19:10 +0200 Subject: [MIPS] SMTC: Clear TIF_FPUBOUND on clone / fork. Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index b16facd9ea8e..ce7684335a41 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -148,6 +148,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, clear_tsk_thread_flag(p, TIF_USEDFPU); #ifdef CONFIG_MIPS_MT_FPAFF + clear_tsk_thread_flag(p, TIF_FPUBOUND); + /* * FPU affinity support is cleaner if we track the * user-visible CPU affinity from the very beginning. -- cgit v1.2.3 From c65a5480ff29198c241f11d39d9e34ab22c72c69 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 12 Nov 2007 02:05:18 +0900 Subject: [MIPS] Fix potential latency problem due to non-atomic cpu_wait. If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 16 ++-------------- arch/mips/kernel/genex.S | 37 +++++++++++++++++++++++++++++++++++++ arch/mips/kernel/traps.c | 22 ++++++++++++++++------ 3 files changed, 55 insertions(+), 20 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 335a6ae3d594..11c92dc53791 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -45,18 +45,7 @@ static void r39xx_wait(void) local_irq_enable(); } -/* - * There is a race when WAIT instruction executed with interrupt - * enabled. - * But it is implementation-dependent wheter the pipelie restarts when - * a non-enabled interrupt is requested. - */ -static void r4k_wait(void) -{ - __asm__(" .set mips3 \n" - " wait \n" - " .set mips0 \n"); -} +extern void r4k_wait(void); /* * This variant is preferable as it allows testing need_resched and going to @@ -128,7 +117,7 @@ static int __init wait_disable(char *s) __setup("nowait", wait_disable); -static inline void check_wait(void) +void __init check_wait(void) { struct cpuinfo_mips *c = ¤t_cpu_data; @@ -242,7 +231,6 @@ static inline void check_errata(void) void __init check_bugs32(void) { - check_wait(); check_errata(); } diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index c6ada98ee042..f886dd7f708e 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -20,6 +20,7 @@ #include #include #include +#include #define PANIC_PIC(msg) \ .set push; \ @@ -126,7 +127,42 @@ handle_vcei: __FINIT + .align 5 /* 32 byte rollback region */ +LEAF(r4k_wait) + .set push + .set noreorder + /* start of rollback region */ + LONG_L t0, TI_FLAGS($28) + nop + andi t0, _TIF_NEED_RESCHED + bnez t0, 1f + nop + nop + nop + .set mips3 + wait + /* end of rollback region (the region size must be power of two) */ + .set pop +1: + jr ra + END(r4k_wait) + + .macro BUILD_ROLLBACK_PROLOGUE handler + FEXPORT(rollback_\handler) + .set push + .set noat + MFC0 k0, CP0_EPC + PTR_LA k1, r4k_wait + ori k0, 0x1f /* 32 byte rollback region */ + xori k0, 0x1f + bne k0, k1, 9f + MTC0 k0, CP0_EPC +9: + .set pop + .endm + .align 5 +BUILD_ROLLBACK_PROLOGUE handle_int NESTED(handle_int, PT_SIZE, sp) #ifdef CONFIG_TRACE_IRQFLAGS /* @@ -201,6 +237,7 @@ NESTED(except_vec_ejtag_debug, 0, sp) * This prototype is copied to ebase + n*IntCtl.VS and patched * to invoke the handler */ +BUILD_ROLLBACK_PROLOGUE except_vec_vi NESTED(except_vec_vi, 0, sp) SAVE_SOME SAVE_AT diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 6bee29097a56..5fd0cd020af5 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -46,6 +46,9 @@ #include #include +extern void check_wait(void); +extern asmlinkage void r4k_wait(void); +extern asmlinkage void rollback_handle_int(void); extern asmlinkage void handle_int(void); extern asmlinkage void handle_tlbm(void); extern asmlinkage void handle_tlbl(void); @@ -1251,6 +1254,9 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) extern char except_vec_vi, except_vec_vi_lui; extern char except_vec_vi_ori, except_vec_vi_end; + extern char rollback_except_vec_vi; + char *vec_start = (cpu_wait == r4k_wait) ? + &rollback_except_vec_vi : &except_vec_vi; #ifdef CONFIG_MIPS_MT_SMTC /* * We need to provide the SMTC vectored interrupt handler @@ -1258,11 +1264,11 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) * Status.IM bit to be masked before going there. */ extern char except_vec_vi_mori; - const int mori_offset = &except_vec_vi_mori - &except_vec_vi; + const int mori_offset = &except_vec_vi_mori - vec_start; #endif /* CONFIG_MIPS_MT_SMTC */ - const int handler_len = &except_vec_vi_end - &except_vec_vi; - const int lui_offset = &except_vec_vi_lui - &except_vec_vi; - const int ori_offset = &except_vec_vi_ori - &except_vec_vi; + const int handler_len = &except_vec_vi_end - vec_start; + const int lui_offset = &except_vec_vi_lui - vec_start; + const int ori_offset = &except_vec_vi_ori - vec_start; if (handler_len > VECTORSPACING) { /* @@ -1272,7 +1278,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) panic("VECTORSPACING too small"); } - memcpy(b, &except_vec_vi, handler_len); + memcpy(b, vec_start, handler_len); #ifdef CONFIG_MIPS_MT_SMTC BUG_ON(n > 7); /* Vector index %d exceeds SMTC maximum. */ @@ -1554,6 +1560,10 @@ void __init trap_init(void) extern char except_vec3_generic, except_vec3_r4000; extern char except_vec4; unsigned long i; + int rollback; + + check_wait(); + rollback = (cpu_wait == r4k_wait); #if defined(CONFIG_KGDB) if (kgdb_early_setup) @@ -1618,7 +1628,7 @@ void __init trap_init(void) if (board_be_init) board_be_init(); - set_except_vector(0, handle_int); + set_except_vector(0, rollback ? rollback_handle_int : handle_int); set_except_vector(1, handle_tlbm); set_except_vector(2, handle_tlbl); set_except_vector(3, handle_tlbs); -- cgit v1.2.3 From 6b3766a263a62fc82ca0457faa73dc34b98ceb87 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 5 Aug 2008 23:45:14 +0900 Subject: [MIPS] vmlinux.lds.S: handle .text.* The -ffunction-sections puts each text in .text.function_name section. Without this patch, most functions are placed outside _text..._etext area and it breaks show_stacktrace(), etc. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/vmlinux.lds.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/mips') diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index b5470ceb418b..afb119f35682 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -36,6 +36,7 @@ SECTIONS SCHED_TEXT LOCK_TEXT KPROBES_TEXT + *(.text.*) *(.fixup) *(.gnu.warning) } :text = 0 -- cgit v1.2.3 From 44ce17192a01218b242e032237e1d2e52ef50429 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Tue, 23 Sep 2008 19:48:36 +0200 Subject: [MIPS] au1000: Fix gpio direction When setting the direction of one GPIO pin we have to keep the state of the other pins, hence use binary OR. Also gpio_direction_output() wants to set an initial value, so add that too. This fixes a problem with the USB power switch on mtx-1 boards. Signed-off-by: Bruno Randolf Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/gpio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c index b485d94ce8a5..1f058434b726 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/au1000/common/gpio.c @@ -61,7 +61,8 @@ static int au1xxx_gpio2_direction_input(unsigned gpio) static int au1xxx_gpio2_direction_output(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; - gpio2->dir = (0x01 << gpio) | (value << gpio); + gpio2->dir |= 0x01 << gpio; + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); return 0; } @@ -90,6 +91,7 @@ static int au1xxx_gpio1_direction_input(unsigned gpio) static int au1xxx_gpio1_direction_output(unsigned gpio, int value) { gpio1->trioutclr = (0x01 & gpio); + au1xxx_gpio1_write(gpio, value); return 0; } -- cgit v1.2.3 From d7161a65341556bacb5e6654e133803f46f51063 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 26 Sep 2008 10:36:41 -0500 Subject: kgdb, x86, arm, mips, powerpc: ignore user space single stepping On the x86 arch, user space single step exceptions should be ignored if they occur in the kernel space, such as ptrace stepping through a system call. First check if it is kgdb that is executing a single step, then ensure it is not an accidental traversal into the user space, while in kgdb, any other time the TIF_SINGLESTEP is set, kgdb should ignore the exception. On x86, arm, mips and powerpc, the kgdb_contthread usage was inconsistent with the way single stepping is implemented in the kgdb core. The arch specific stub should always set the kgdb_cpu_doing_single_step correctly if it is single stepping. This allows kgdb to correctly process an instruction steps if ptrace happens to be requesting an instruction step over a system call. Signed-off-by: Jason Wessel --- arch/arm/kernel/kgdb.c | 2 -- arch/mips/kernel/kgdb.c | 3 +-- arch/powerpc/kernel/kgdb.c | 5 ++--- arch/x86/kernel/kgdb.c | 18 +++++++++++------- kernel/kgdb.c | 8 ++++---- 5 files changed, 18 insertions(+), 18 deletions(-) (limited to 'arch/mips') diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index aaffaecffcd1..ba8ccfede964 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -111,8 +111,6 @@ int kgdb_arch_handle_exception(int exception_vector, int signo, case 'D': case 'k': case 'c': - kgdb_contthread = NULL; - /* * Try to read optional parameter, pc unchanged if no parm. * If this was a compiled breakpoint, we need to move diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c index 8f6d58ede33c..6e152c80cd4a 100644 --- a/arch/mips/kernel/kgdb.c +++ b/arch/mips/kernel/kgdb.c @@ -236,8 +236,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, atomic_set(&kgdb_cpu_doing_single_step, -1); if (remcom_in_buffer[0] == 's') - if (kgdb_contthread) - atomic_set(&kgdb_cpu_doing_single_step, cpu); + atomic_set(&kgdb_cpu_doing_single_step, cpu); return 0; } diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index b4fdf2f2743c..fe8f71dd0b3f 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -347,9 +347,8 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, linux_regs->msr |= MSR_SE; #endif kgdb_single_step = 1; - if (kgdb_contthread) - atomic_set(&kgdb_cpu_doing_single_step, - raw_smp_processor_id()); + atomic_set(&kgdb_cpu_doing_single_step, + raw_smp_processor_id()); } return 0; } diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index f47f0eb886b8..00f7896c9a19 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -378,10 +378,8 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, if (remcomInBuffer[0] == 's') { linux_regs->flags |= X86_EFLAGS_TF; kgdb_single_step = 1; - if (kgdb_contthread) { - atomic_set(&kgdb_cpu_doing_single_step, - raw_smp_processor_id()); - } + atomic_set(&kgdb_cpu_doing_single_step, + raw_smp_processor_id()); } get_debugreg(dr6, 6); @@ -466,9 +464,15 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd) case DIE_DEBUG: if (atomic_read(&kgdb_cpu_doing_single_step) == - raw_smp_processor_id() && - user_mode(regs)) - return single_step_cont(regs, args); + raw_smp_processor_id()) { + if (user_mode(regs)) + return single_step_cont(regs, args); + break; + } else if (test_thread_flag(TIF_SINGLESTEP)) + /* This means a user thread is single stepping + * a system call which should be ignored + */ + return NOTIFY_DONE; /* fall through */ default: if (user_mode(regs)) diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 949806ab67de..25d955dbb989 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -1462,7 +1462,7 @@ acquirelock: * Get the passive CPU lock which will hold all the non-primary * CPU in a spin state while the debugger is active */ - if (!kgdb_single_step || !kgdb_contthread) { + if (!kgdb_single_step) { for (i = 0; i < NR_CPUS; i++) atomic_set(&passive_cpu_wait[i], 1); } @@ -1475,7 +1475,7 @@ acquirelock: #ifdef CONFIG_SMP /* Signal the other CPUs to enter kgdb_wait() */ - if ((!kgdb_single_step || !kgdb_contthread) && kgdb_do_roundup) + if ((!kgdb_single_step) && kgdb_do_roundup) kgdb_roundup_cpus(flags); #endif @@ -1494,7 +1494,7 @@ acquirelock: kgdb_post_primary_code(ks->linux_regs, ks->ex_vector, ks->err_code); kgdb_deactivate_sw_breakpoints(); kgdb_single_step = 0; - kgdb_contthread = NULL; + kgdb_contthread = current; exception_level = 0; /* Talk to debugger with gdbserial protocol */ @@ -1508,7 +1508,7 @@ acquirelock: kgdb_info[ks->cpu].task = NULL; atomic_set(&cpu_in_kgdb[ks->cpu], 0); - if (!kgdb_single_step || !kgdb_contthread) { + if (!kgdb_single_step) { for (i = NR_CPUS-1; i >= 0; i--) atomic_set(&passive_cpu_wait[i], 0); /* -- cgit v1.2.3 From 19506fc51852e859bb08ab5abbdb8fd02b7392f2 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Thu, 25 Sep 2008 16:45:10 +0200 Subject: [MIPS] au1000: Make sure GPIO value is zero or one David Brownell wrote: > The problem is that "value" is zero-or-nonzero. > This code wrongly assumes it's zero-or-one. > Possible fix: "((!!value) << gpio)". Signed-off-by: Bruno Randolf Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c index 1f058434b726..e660ddd611c4 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/au1000/common/gpio.c @@ -48,7 +48,7 @@ static void au1xxx_gpio2_write(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); } static int au1xxx_gpio2_direction_input(unsigned gpio) @@ -62,7 +62,7 @@ static int au1xxx_gpio2_direction_output(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; gpio2->dir |= 0x01 << gpio; - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); return 0; } -- cgit v1.2.3 From f4d15f1c877644a604f8c8c3d094c13f9f8bdcf2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 27 Sep 2008 15:05:06 +0100 Subject: [MIPS] IP27: Switch to dynamic interrupt routing avoding panic on error. pcibios_map_irq is no way of returning an error but on IP27 an interrupt is possibly not routable when running out of resources. So do the interrupt routing at pcibios_enable_device time. Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-ip27.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index bd78368c82bf..f97ab1461012 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -142,26 +142,48 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) * on any one of the hubs connected to its xbow. */ int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return 0; +} + +/* Most MIPS systems have straight-forward swizzling needs. */ +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev) +{ + while (dev->bus->parent) { + /* Move up the chain of bridges. */ + dev = dev->bus->self; + } + + return dev; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) { struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); - int irq = bc->pci_int[slot]; + struct pci_dev *rdev = bridge_root_dev(dev); + int slot = PCI_SLOT(rdev->devfn); + int irq; + irq = bc->pci_int[slot]; if (irq == -1) { - irq = bc->pci_int[slot] = request_bridge_irq(bc); + irq = request_bridge_irq(bc); if (irq < 0) - panic("Can't allocate interrupt for PCI device %s\n", - pci_name(dev)); + return irq; + + bc->pci_int[slot] = irq; } irq_to_bridge[irq] = bc; irq_to_slot[irq] = slot; - return irq; -} + dev->irq = irq; -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ return 0; } -- cgit v1.2.3 From 2dc42b47a7886bdc87514990c68ecdf8de61e653 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Sat, 27 Sep 2008 16:06:16 +0200 Subject: [MIPS] BCM47xx: Fix build error due to missing PCI functions This patch defines pcibios_map_irq() and pcibios_plat_dev_init() for the BCM47xx platform. It fixes the regression introduced by commit aab547ce0d1493d400b6468c521a0137cd8c1edf. Signed-off-by: Aurelien Jarno Signed-off-by: Ralf Baechle --- arch/mips/pci/Makefile | 1 + arch/mips/pci/pci-bcm47xx.c | 60 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 61 insertions(+) create mode 100644 arch/mips/pci/pci-bcm47xx.c (limited to 'arch/mips') diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 15e01aec37fd..c8c32f417b6c 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o +obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o # # These are still pretty much in the old state, watch, go blind. diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c new file mode 100644 index 000000000000..bea9b6cdfdbf --- /dev/null +++ b/arch/mips/pci/pci-bcm47xx.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2008 Aurelien Jarno + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return 0; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + int res; + u8 slot, pin; + + res = ssb_pcibios_plat_dev_init(dev); + if (res < 0) { + printk(KERN_ALERT "PCI: Failed to init device %s\n", + pci_name(dev)); + return res; + } + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + slot = PCI_SLOT(dev->devfn); + res = ssb_pcibios_map_irq(dev, slot, pin); + + /* IRQ-0 and IRQ-1 are software interrupts. */ + if (res < 2) { + printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n", + pci_name(dev)); + return res; + } + + dev->irq = res; + return 0; +} + -- cgit v1.2.3 From b7e4226e4f427b59dc8e9c45a2a1a1ed1353a140 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 1 Oct 2008 21:52:41 +0100 Subject: [MIPS] Build fix: Fix irq flags type Though from a hardware perspective it would be sensible to use only a 32-bit unsigned int type Linux defines interrupt flags to be stored in an unsigned long and nothing else. Signed-off-by: Ralf Baechle --- arch/mips/kernel/ptrace.c | 2 +- arch/mips/kernel/smtc.c | 6 +++--- include/asm-mips/mipsregs.h | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 35234b92b9a5..96ffc9c6d194 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -238,7 +238,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case FPC_EIR: { /* implementation / version register */ unsigned int flags; #ifdef CONFIG_MIPS_MT_SMTC - unsigned int irqflags; + unsigned long irqflags; unsigned int mtflags; #endif /* CONFIG_MIPS_MT_SMTC */ diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index a516286532ab..05f2708a9029 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -556,7 +556,7 @@ void mipsmt_prepare_cpus(void) void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle) { extern u32 kernelsp[NR_CPUS]; - long flags; + unsigned long flags; int mtflags; LOCK_MT_PRA(); @@ -753,7 +753,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) { int tcstatus; struct smtc_ipi *pipi; - long flags; + unsigned long flags; int mtflags; if (cpu == smp_processor_id()) { @@ -975,7 +975,7 @@ static irqreturn_t ipi_interrupt(int irq, void *dev_idm) struct smtc_ipi *pipi; unsigned long tcstatus; int sent; - long flags; + unsigned long flags; unsigned int mtflags; unsigned int vpflags; diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h index a46f8e258e6b..979866000da4 100644 --- a/include/asm-mips/mipsregs.h +++ b/include/asm-mips/mipsregs.h @@ -1462,7 +1462,7 @@ set_c0_##name(unsigned int set) \ { \ unsigned int res; \ unsigned int omt; \ - unsigned int flags; \ + unsigned long flags; \ \ local_irq_save(flags); \ omt = __dmt(); \ @@ -1480,7 +1480,7 @@ clear_c0_##name(unsigned int clear) \ { \ unsigned int res; \ unsigned int omt; \ - unsigned int flags; \ + unsigned long flags; \ \ local_irq_save(flags); \ omt = __dmt(); \ @@ -1498,7 +1498,7 @@ change_c0_##name(unsigned int change, unsigned int new) \ { \ unsigned int res; \ unsigned int omt; \ - unsigned int flags; \ + unsigned long flags; \ \ local_irq_save(flags); \ \ -- cgit v1.2.3 From 498a863fdfb3e60d2e0e964cd202c2030bda1005 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 1 Oct 2008 22:23:52 +0100 Subject: [MIPS] SMTC: Build fix: Fix filename in Makefile Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile index 3b7dd722c32a..cef2db8d2225 100644 --- a/arch/mips/mti-malta/Makefile +++ b/arch/mips/mti-malta/Makefile @@ -15,6 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK) += malta-console.o obj-$(CONFIG_PCI) += malta-pci.o # FIXME FIXME FIXME -obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o +obj-$(CONFIG_MIPS_MT_SMTC) += malta-smtc.o EXTRA_CFLAGS += -Werror -- cgit v1.2.3 From 9cc123631b6630948eb5059d218f44424888daa7 Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 9 Sep 2008 21:33:36 +0200 Subject: [MIPS] SMTC: Fix holes in SMTC and FPU affinity support. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips-mt-fpaff.c | 2 +- arch/mips/kernel/process.c | 19 +++++++++---------- arch/mips/kernel/traps.c | 6 ++++-- 3 files changed, 14 insertions(+), 13 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c index df4d3f2f740c..dc9eb72ed9de 100644 --- a/arch/mips/kernel/mips-mt-fpaff.c +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -159,7 +159,7 @@ __setup("fpaff=", fpaff_thresh); /* * FPU Use Factor empirically derived from experiments on 34K */ -#define FPUSEFACTOR 333 +#define FPUSEFACTOR 2000 static __init int mt_fp_affinity_init(void) { diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index ce7684335a41..22fc19bbe87f 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -55,7 +55,7 @@ void __noreturn cpu_idle(void) while (1) { tick_nohz_stop_sched_tick(1); while (!need_resched()) { -#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG +#ifdef CONFIG_MIPS_MT_SMTC extern void smtc_idle_loop_hook(void); smtc_idle_loop_hook(); @@ -145,19 +145,18 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, */ p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1); childregs->cp0_status &= ~(ST0_CU2|ST0_CU1); + +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC restores TCStatus after Status, and the CU bits + * are aliased there. + */ + childregs->cp0_tcstatus &= ~(ST0_CU2|ST0_CU1); +#endif clear_tsk_thread_flag(p, TIF_USEDFPU); #ifdef CONFIG_MIPS_MT_FPAFF clear_tsk_thread_flag(p, TIF_FPUBOUND); - - /* - * FPU affinity support is cleaner if we track the - * user-visible CPU affinity from the very beginning. - * The generic cpus_allowed mask will already have - * been copied from the parent before copy_thread - * is invoked. - */ - p->thread.user_cpus_allowed = p->cpus_allowed; #endif /* CONFIG_MIPS_MT_FPAFF */ if (clone_flags & CLONE_SETTLS) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 5fd0cd020af5..b602ac6eb47d 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -825,8 +825,10 @@ static void mt_ase_fp_affinity(void) if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) { cpumask_t tmask; - cpus_and(tmask, current->thread.user_cpus_allowed, - mt_fpu_cpumask); + current->thread.user_cpus_allowed + = current->cpus_allowed; + cpus_and(tmask, current->cpus_allowed, + mt_fpu_cpumask); set_cpus_allowed(current, tmask); set_thread_flag(TIF_FPUBOUND); } -- cgit v1.2.3 From d2bb01b042a38219fbddaafc214c5beb96248d2f Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 9 Sep 2008 21:35:01 +0200 Subject: [MIPS] SMTC: Close tiny holes in the SMTC IPI replay system. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/kernel/entry.S | 10 +++--- arch/mips/kernel/smtc.c | 2 +- include/asm-mips/stackframe.h | 72 ++++++++++++++++++++++++++++++++++++------- 3 files changed, 67 insertions(+), 17 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index e29598ae939d..ffa331029e08 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -79,11 +79,6 @@ FEXPORT(syscall_exit) FEXPORT(restore_all) # restore full frame #ifdef CONFIG_MIPS_MT_SMTC -/* Detect and execute deferred IPI "interrupts" */ - LONG_L s0, TI_REGS($28) - LONG_S sp, TI_REGS($28) - jal deferred_smtc_ipi - LONG_S s0, TI_REGS($28) #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP /* Re-arm any temporarily masked interrupts not explicitly "acked" */ mfc0 v0, CP0_TCSTATUS @@ -112,6 +107,11 @@ FEXPORT(restore_all) # restore full frame xor t0, t0, t3 mtc0 t0, CP0_TCCONTEXT #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ +/* Detect and execute deferred IPI "interrupts" */ + LONG_L s0, TI_REGS($28) + LONG_S sp, TI_REGS($28) + jal deferred_smtc_ipi + LONG_S s0, TI_REGS($28) #endif /* CONFIG_MIPS_MT_SMTC */ .set noat RESTORE_TEMP diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 05f2708a9029..39b491b9ad87 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -70,7 +70,7 @@ static atomic_t ipi_timer_latch[NR_CPUS]; #define IPIBUF_PER_CPU 4 -static struct smtc_ipi_q IPIQ[NR_CPUS]; +struct smtc_ipi_q IPIQ[NR_CPUS]; static struct smtc_ipi_q freeIPIq; diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h index 051e1af0bb95..4c37c4e5f72e 100644 --- a/include/asm-mips/stackframe.h +++ b/include/asm-mips/stackframe.h @@ -297,14 +297,31 @@ #ifdef CONFIG_MIPS_MT_SMTC .set mips32r2 /* - * This may not really be necessary if ints are already - * inhibited here. + * We need to make sure the read-modify-write + * of Status below isn't perturbed by an interrupt + * or cross-TC access, so we need to do at least a DMT, + * protected by an interrupt-inhibit. But setting IXMT + * also creates a few-cycle window where an IPI could + * be queued and not be detected before potentially + * returning to a WAIT or user-mode loop. It must be + * replayed. + * + * We're in the middle of a context switch, and + * we can't dispatch it directly without trashing + * some registers, so we'll try to detect this unlikely + * case and program a software interrupt in the VPE, + * as would be done for a cross-VPE IPI. To accomodate + * the handling of that case, we're doing a DVPE instead + * of just a DMT here to protect against other threads. + * This is a lot of cruft to cover a tiny window. + * If you can find a better design, implement it! + * */ mfc0 v0, CP0_TCSTATUS ori v0, TCSTATUS_IXMT mtc0 v0, CP0_TCSTATUS _ehb - DMT 5 # dmt a1 + DVPE 5 # dvpe a1 jal mips_ihb #endif /* CONFIG_MIPS_MT_SMTC */ mfc0 a0, CP0_STATUS @@ -325,17 +342,50 @@ */ LONG_L v1, PT_TCSTATUS(sp) _ehb - mfc0 v0, CP0_TCSTATUS + mfc0 a0, CP0_TCSTATUS andi v1, TCSTATUS_IXMT - /* We know that TCStatua.IXMT should be set from above */ - xori v0, v0, TCSTATUS_IXMT - or v0, v0, v1 - mtc0 v0, CP0_TCSTATUS - _ehb - andi a1, a1, VPECONTROL_TE + bnez v1, 0f + +/* + * We'd like to detect any IPIs queued in the tiny window + * above and request an software interrupt to service them + * when we ERET. + * + * Computing the offset into the IPIQ array of the executing + * TC's IPI queue in-line would be tedious. We use part of + * the TCContext register to hold 16 bits of offset that we + * can add in-line to find the queue head. + */ + mfc0 v0, CP0_TCCONTEXT + la a2, IPIQ + srl v0, v0, 16 + addu a2, a2, v0 + LONG_L v0, 0(a2) + beqz v0, 0f +/* + * If we have a queue, provoke dispatch within the VPE by setting C_SW1 + */ + mfc0 v0, CP0_CAUSE + ori v0, v0, C_SW1 + mtc0 v0, CP0_CAUSE +0: + /* + * This test should really never branch but + * let's be prudent here. Having atomized + * the shared register modifications, we can + * now EVPE, and must do so before interrupts + * are potentially re-enabled. + */ + andi a1, a1, MVPCONTROL_EVP beqz a1, 1f - emt + evpe 1: + /* We know that TCStatua.IXMT should be set from above */ + xori a0, a0, TCSTATUS_IXMT + or a0, a0, v1 + mtc0 a0, CP0_TCSTATUS + _ehb + .set mips0 #endif /* CONFIG_MIPS_MT_SMTC */ LONG_L v1, PT_EPC(sp) -- cgit v1.2.3 From 8531a35e5e275b17c57c39b7911bc2b37025f28c Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 9 Sep 2008 21:48:52 +0200 Subject: [MIPS] SMTC: Fix SMTC dyntick support. Rework of SMTC support to make it work with the new clock event system, allowing "tickless" operation, and to make it compatible with the use of the "wait_irqoff" idle loop. The new clocking scheme means that the previously optional IPI instant replay mechanism is now required, and has been made more robust. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 26 +--- arch/mips/kernel/Makefile | 1 + arch/mips/kernel/cevt-r4k.c | 173 ++++++--------------- arch/mips/kernel/cevt-smtc.c | 321 +++++++++++++++++++++++++++++++++++++++ arch/mips/kernel/cpu-probe.c | 10 +- arch/mips/kernel/genex.S | 4 +- arch/mips/kernel/smtc.c | 252 +++++++++++++++--------------- arch/mips/mti-malta/malta-smtc.c | 9 +- include/asm-mips/cevt-r4k.h | 46 ++++++ include/asm-mips/irqflags.h | 26 +++- include/asm-mips/smtc.h | 8 +- 11 files changed, 597 insertions(+), 279 deletions(-) create mode 100644 arch/mips/kernel/cevt-smtc.c create mode 100644 include/asm-mips/cevt-r4k.h (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 49896a2a1d72..c930b8ceb418 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1403,7 +1403,6 @@ config MIPS_MT_SMTC depends on CPU_MIPS32_R2 #depends on CPU_MIPS64_R2 # once there is hardware ... depends on SYS_SUPPORTS_MULTITHREADING - select GENERIC_CLOCKEVENTS_BROADCAST select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI select MIPS_MT @@ -1451,32 +1450,17 @@ config MIPS_VPE_LOADER Includes a loader for loading an elf relocatable object onto another VPE and running it. -config MIPS_MT_SMTC_INSTANT_REPLAY - bool "Low-latency Dispatch of Deferred SMTC IPIs" - depends on MIPS_MT_SMTC && !PREEMPT - default y - help - SMTC pseudo-interrupts between TCs are deferred and queued - if the target TC is interrupt-inhibited (IXMT). In the first - SMTC prototypes, these queued IPIs were serviced on return - to user mode, or on entry into the kernel idle loop. The - INSTANT_REPLAY option dispatches them as part of local_irq_restore() - processing, which adds runtime overhead (hence the option to turn - it off), but ensures that IPIs are handled promptly even under - heavy I/O interrupt load. - config MIPS_MT_SMTC_IM_BACKSTOP bool "Use per-TC register bits as backstop for inhibited IM bits" depends on MIPS_MT_SMTC - default y + default n help To support multiple TC microthreads acting as "CPUs" within a VPE, VPE-wide interrupt mask bits must be specially manipulated during interrupt handling. To support legacy drivers and interrupt controller management code, SMTC has a "backstop" to track and if necessary restore the interrupt mask. This has some performance - impact on interrupt service overhead. Disable it only if you know - what you are doing. + impact on interrupt service overhead. config MIPS_MT_SMTC_IRQAFF bool "Support IRQ affinity API" @@ -1486,10 +1470,8 @@ config MIPS_MT_SMTC_IRQAFF Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.) for SMTC Linux kernel. Requires platform support, of which an example can be found in the MIPS kernel i8259 and Malta - platform code. It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY - be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to - interrupt dispatch, and should be used only if you know what - you are doing. + platform code. Adds some overhead to interrupt dispatch, and + should be used only if you know what you are doing. config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 706f93974797..25775cb54000 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -10,6 +10,7 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o +obj-$(CONFIG_MIPS_MT_SMTC) += cevt-smtc.o obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 24a2d907aa0d..4a4c59f2737a 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -12,6 +12,14 @@ #include #include +#include + +/* + * The SMTC Kernel for the 34K, 1004K, et. al. replaces several + * of these routines with SMTC-specific variants. + */ + +#ifndef CONFIG_MIPS_MT_SMTC static int mips_next_event(unsigned long delta, struct clock_event_device *evt) @@ -19,60 +27,27 @@ static int mips_next_event(unsigned long delta, unsigned int cnt; int res; -#ifdef CONFIG_MIPS_MT_SMTC - { - unsigned long flags, vpflags; - local_irq_save(flags); - vpflags = dvpe(); -#endif cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; -#ifdef CONFIG_MIPS_MT_SMTC - evpe(vpflags); - local_irq_restore(flags); - } -#endif return res; } -static void mips_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +#endif /* CONFIG_MIPS_MT_SMTC */ + +void mips_set_clock_mode(enum clock_event_mode mode, + struct clock_event_device *evt) { /* Nothing to do ... */ } -static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); -static int cp0_timer_irq_installed; +DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); +int cp0_timer_irq_installed; -/* - * Timer ack for an R4k-compatible timer of a known frequency. - */ -static void c0_timer_ack(void) -{ - write_c0_compare(read_c0_compare()); -} +#ifndef CONFIG_MIPS_MT_SMTC -/* - * Possibly handle a performance counter interrupt. - * Return true if the timer interrupt should not be checked - */ -static inline int handle_perf_irq(int r2) -{ - /* - * The performance counter overflow interrupt may be shared with the - * timer interrupt (cp0_perfcount_irq < 0). If it is and a - * performance counter has overflowed (perf_irq() == IRQ_HANDLED) - * and we can't reliably determine if a counter interrupt has also - * happened (!r2) then don't check for a timer interrupt. - */ - return (cp0_perfcount_irq < 0) && - perf_irq() == IRQ_HANDLED && - !r2; -} - -static irqreturn_t c0_compare_interrupt(int irq, void *dev_id) +irqreturn_t c0_compare_interrupt(int irq, void *dev_id) { const int r2 = cpu_has_mips_r2; struct clock_event_device *cd; @@ -93,12 +68,8 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id) * interrupt. Being the paranoiacs we are we check anyway. */ if (!r2 || (read_c0_cause() & (1 << 30))) { - c0_timer_ack(); -#ifdef CONFIG_MIPS_MT_SMTC - if (cpu_data[cpu].vpe_id) - goto out; - cpu = 0; -#endif + /* Clear Count/Compare Interrupt */ + write_c0_compare(read_c0_compare()); cd = &per_cpu(mips_clockevent_device, cpu); cd->event_handler(cd); } @@ -107,65 +78,16 @@ out: return IRQ_HANDLED; } -static struct irqaction c0_compare_irqaction = { +#endif /* Not CONFIG_MIPS_MT_SMTC */ + +struct irqaction c0_compare_irqaction = { .handler = c0_compare_interrupt, -#ifdef CONFIG_MIPS_MT_SMTC - .flags = IRQF_DISABLED, -#else .flags = IRQF_DISABLED | IRQF_PERCPU, -#endif .name = "timer", }; -#ifdef CONFIG_MIPS_MT_SMTC -DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device); - -static void smtc_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ -} - -static void mips_broadcast(cpumask_t mask) -{ - unsigned int cpu; - - for_each_cpu_mask(cpu, mask) - smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); -} - -static void setup_smtc_dummy_clockevent_device(void) -{ - //uint64_t mips_freq = mips_hpt_^frequency; - unsigned int cpu = smp_processor_id(); - struct clock_event_device *cd; - cd = &per_cpu(smtc_dummy_clockevent_device, cpu); - - cd->name = "SMTC"; - cd->features = CLOCK_EVT_FEAT_DUMMY; - - /* Calculate the min / max delta */ - cd->mult = 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32); - cd->shift = 0; //32; - cd->max_delta_ns = 0; //clockevent_delta2ns(0x7fffffff, cd); - cd->min_delta_ns = 0; //clockevent_delta2ns(0x30, cd); - - cd->rating = 200; - cd->irq = 17; //-1; -// if (cpu) -// cd->cpumask = CPU_MASK_ALL; // cpumask_of_cpu(cpu); -// else - cd->cpumask = cpumask_of_cpu(cpu); - - cd->set_mode = smtc_set_mode; - - cd->broadcast = mips_broadcast; - - clockevents_register_device(cd); -} -#endif - -static void mips_event_handler(struct clock_event_device *dev) +void mips_event_handler(struct clock_event_device *dev) { } @@ -177,7 +99,23 @@ static int c0_compare_int_pending(void) return (read_c0_cause() >> cp0_compare_irq) & 0x100; } -static int c0_compare_int_usable(void) +/* + * Compare interrupt can be routed and latched outside the core, + * so a single execution hazard barrier may not be enough to give + * it time to clear as seen in the Cause register. 4 time the + * pipeline depth seems reasonably conservative, and empirically + * works better in configurations with high CPU/bus clock ratios. + */ + +#define compare_change_hazard() \ + do { \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + } while (0) + +int c0_compare_int_usable(void) { unsigned int delta; unsigned int cnt; @@ -187,7 +125,7 @@ static int c0_compare_int_usable(void) */ if (c0_compare_int_pending()) { write_c0_compare(read_c0_count()); - irq_disable_hazard(); + compare_change_hazard(); if (c0_compare_int_pending()) return 0; } @@ -196,7 +134,7 @@ static int c0_compare_int_usable(void) cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); - irq_disable_hazard(); + compare_change_hazard(); if ((int)(read_c0_count() - cnt) < 0) break; /* increase delta if the timer was already expired */ @@ -205,11 +143,12 @@ static int c0_compare_int_usable(void) while ((int)(read_c0_count() - cnt) <= 0) ; /* Wait for expiry */ + compare_change_hazard(); if (!c0_compare_int_pending()) return 0; write_c0_compare(read_c0_count()); - irq_disable_hazard(); + compare_change_hazard(); if (c0_compare_int_pending()) return 0; @@ -219,6 +158,8 @@ static int c0_compare_int_usable(void) return 1; } +#ifndef CONFIG_MIPS_MT_SMTC + int __cpuinit mips_clockevent_init(void) { uint64_t mips_freq = mips_hpt_frequency; @@ -229,17 +170,6 @@ int __cpuinit mips_clockevent_init(void) if (!cpu_has_counter || !mips_hpt_frequency) return -ENXIO; -#ifdef CONFIG_MIPS_MT_SMTC - setup_smtc_dummy_clockevent_device(); - - /* - * On SMTC we only register VPE0's compare interrupt as clockevent - * device. - */ - if (cpu) - return 0; -#endif - if (!c0_compare_int_usable()) return -ENXIO; @@ -265,13 +195,9 @@ int __cpuinit mips_clockevent_init(void) cd->rating = 300; cd->irq = irq; -#ifdef CONFIG_MIPS_MT_SMTC - cd->cpumask = CPU_MASK_ALL; -#else cd->cpumask = cpumask_of_cpu(cpu); -#endif cd->set_next_event = mips_next_event; - cd->set_mode = mips_set_mode; + cd->set_mode = mips_set_clock_mode; cd->event_handler = mips_event_handler; clockevents_register_device(cd); @@ -281,12 +207,9 @@ int __cpuinit mips_clockevent_init(void) cp0_timer_irq_installed = 1; -#ifdef CONFIG_MIPS_MT_SMTC -#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq) - setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT); -#else setup_irq(irq, &c0_compare_irqaction); -#endif return 0; } + +#endif /* Not CONFIG_MIPS_MT_SMTC */ diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c new file mode 100644 index 000000000000..5162fe4b5952 --- /dev/null +++ b/arch/mips/kernel/cevt-smtc.c @@ -0,0 +1,321 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 MIPS Technologies, Inc. + * Copyright (C) 2007 Ralf Baechle + * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl + */ +#include +#include +#include + +#include +#include +#include + +/* + * Variant clock event timer support for SMTC on MIPS 34K, 1004K + * or other MIPS MT cores. + * + * Notes on SMTC Support: + * + * SMTC has multiple microthread TCs pretending to be Linux CPUs. + * But there's only one Count/Compare pair per VPE, and Compare + * interrupts are taken opportunisitically by available TCs + * bound to the VPE with the Count register. The new timer + * framework provides for global broadcasts, but we really + * want VPE-level multicasts for best behavior. So instead + * of invoking the high-level clock-event broadcast code, + * this version of SMTC support uses the historical SMTC + * multicast mechanisms "under the hood", appearing to the + * generic clock layer as if the interrupts are per-CPU. + * + * The approach taken here is to maintain a set of NR_CPUS + * virtual timers, and track which "CPU" needs to be alerted + * at each event. + * + * It's unlikely that we'll see a MIPS MT core with more than + * 2 VPEs, but we *know* that we won't need to handle more + * VPEs than we have "CPUs". So NCPUs arrays of NCPUs elements + * is always going to be overkill, but always going to be enough. + */ + +unsigned long smtc_nexttime[NR_CPUS][NR_CPUS]; +static int smtc_nextinvpe[NR_CPUS]; + +/* + * Timestamps stored are absolute values to be programmed + * into Count register. Valid timestamps will never be zero. + * If a Zero Count value is actually calculated, it is converted + * to be a 1, which will introduce 1 or two CPU cycles of error + * roughly once every four billion events, which at 1000 HZ means + * about once every 50 days. If that's actually a problem, one + * could alternate squashing 0 to 1 and to -1. + */ + +#define MAKEVALID(x) (((x) == 0L) ? 1L : (x)) +#define ISVALID(x) ((x) != 0L) + +/* + * Time comparison is subtle, as it's really truncated + * modular arithmetic. + */ + +#define IS_SOONER(a, b, reference) \ + (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference))) + +/* + * CATCHUP_INCREMENT, used when the function falls behind the counter. + * Could be an increasing function instead of a constant; + */ + +#define CATCHUP_INCREMENT 64 + +static int mips_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned long flags; + unsigned int mtflags; + unsigned long timestamp, reference, previous; + unsigned long nextcomp = 0L; + int vpe = current_cpu_data.vpe_id; + int cpu = smp_processor_id(); + local_irq_save(flags); + mtflags = dmt(); + + /* + * Maintain the per-TC virtual timer + * and program the per-VPE shared Count register + * as appropriate here... + */ + reference = (unsigned long)read_c0_count(); + timestamp = MAKEVALID(reference + delta); + /* + * To really model the clock, we have to catch the case + * where the current next-in-VPE timestamp is the old + * timestamp for the calling CPE, but the new value is + * in fact later. In that case, we have to do a full + * scan and discover the new next-in-VPE CPU id and + * timestamp. + */ + previous = smtc_nexttime[vpe][cpu]; + if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous) + && IS_SOONER(previous, timestamp, reference)) { + int i; + int soonest = cpu; + + /* + * Update timestamp array here, so that new + * value gets considered along with those of + * other virtual CPUs on the VPE. + */ + smtc_nexttime[vpe][cpu] = timestamp; + for_each_online_cpu(i) { + if (ISVALID(smtc_nexttime[vpe][i]) + && IS_SOONER(smtc_nexttime[vpe][i], + smtc_nexttime[vpe][soonest], reference)) { + soonest = i; + } + } + smtc_nextinvpe[vpe] = soonest; + nextcomp = smtc_nexttime[vpe][soonest]; + /* + * Otherwise, we don't have to process the whole array rank, + * we just have to see if the event horizon has gotten closer. + */ + } else { + if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) || + IS_SOONER(timestamp, + smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) { + smtc_nextinvpe[vpe] = cpu; + nextcomp = timestamp; + } + /* + * Since next-in-VPE may me the same as the executing + * virtual CPU, we update the array *after* checking + * its value. + */ + smtc_nexttime[vpe][cpu] = timestamp; + } + + /* + * It may be that, in fact, we don't need to update Compare, + * but if we do, we want to make sure we didn't fall into + * a crack just behind Count. + */ + if (ISVALID(nextcomp)) { + write_c0_compare(nextcomp); + ehb(); + /* + * We never return an error, we just make sure + * that we trigger the handlers as quickly as + * we can if we fell behind. + */ + while ((nextcomp - (unsigned long)read_c0_count()) + > (unsigned long)LONG_MAX) { + nextcomp += CATCHUP_INCREMENT; + write_c0_compare(nextcomp); + ehb(); + } + } + emt(mtflags); + local_irq_restore(flags); + return 0; +} + + +void smtc_distribute_timer(int vpe) +{ + unsigned long flags; + unsigned int mtflags; + int cpu; + struct clock_event_device *cd; + unsigned long nextstamp = 0L; + unsigned long reference; + + +repeat: + for_each_online_cpu(cpu) { + /* + * Find virtual CPUs within the current VPE who have + * unserviced timer requests whose time is now past. + */ + local_irq_save(flags); + mtflags = dmt(); + if (cpu_data[cpu].vpe_id == vpe && + ISVALID(smtc_nexttime[vpe][cpu])) { + reference = (unsigned long)read_c0_count(); + if ((smtc_nexttime[vpe][cpu] - reference) + > (unsigned long)LONG_MAX) { + smtc_nexttime[vpe][cpu] = 0L; + emt(mtflags); + local_irq_restore(flags); + /* + * We don't send IPIs to ourself. + */ + if (cpu != smp_processor_id()) { + smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); + } else { + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); + } + } else { + /* Local to VPE but Valid Time not yet reached. */ + if (!ISVALID(nextstamp) || + IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp, + reference)) { + smtc_nextinvpe[vpe] = cpu; + nextstamp = smtc_nexttime[vpe][cpu]; + } + emt(mtflags); + local_irq_restore(flags); + } + } else { + emt(mtflags); + local_irq_restore(flags); + + } + } + /* Reprogram for interrupt at next soonest timestamp for VPE */ + if (ISVALID(nextstamp)) { + write_c0_compare(nextstamp); + ehb(); + if ((nextstamp - (unsigned long)read_c0_count()) + > (unsigned long)LONG_MAX) + goto repeat; + } +} + + +irqreturn_t c0_compare_interrupt(int irq, void *dev_id) +{ + int cpu = smp_processor_id(); + + /* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */ + handle_perf_irq(1); + + if (read_c0_cause() & (1 << 30)) { + /* Clear Count/Compare Interrupt */ + write_c0_compare(read_c0_compare()); + smtc_distribute_timer(cpu_data[cpu].vpe_id); + } + return IRQ_HANDLED; +} + + +int __cpuinit mips_clockevent_init(void) +{ + uint64_t mips_freq = mips_hpt_frequency; + unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd; + unsigned int irq; + int i; + int j; + + if (!cpu_has_counter || !mips_hpt_frequency) + return -ENXIO; + if (cpu == 0) { + for (i = 0; i < num_possible_cpus(); i++) { + smtc_nextinvpe[i] = 0; + for (j = 0; j < num_possible_cpus(); j++) + smtc_nexttime[i][j] = 0L; + } + /* + * SMTC also can't have the usablility test + * run by secondary TCs once Compare is in use. + */ + if (!c0_compare_int_usable()) + return -ENXIO; + } + + /* + * With vectored interrupts things are getting platform specific. + * get_c0_compare_int is a hook to allow a platform to return the + * interrupt number of it's liking. + */ + irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; + if (get_c0_compare_int) + irq = get_c0_compare_int(); + + cd = &per_cpu(mips_clockevent_device, cpu); + + cd->name = "MIPS"; + cd->features = CLOCK_EVT_FEAT_ONESHOT; + + /* Calculate the min / max delta */ + cd->mult = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32); + cd->shift = 32; + cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); + cd->min_delta_ns = clockevent_delta2ns(0x300, cd); + + cd->rating = 300; + cd->irq = irq; + cd->cpumask = cpumask_of_cpu(cpu); + cd->set_next_event = mips_next_event; + cd->set_mode = mips_set_clock_mode; + cd->event_handler = mips_event_handler; + + clockevents_register_device(cd); + + /* + * On SMTC we only want to do the data structure + * initialization and IRQ setup once. + */ + if (cpu) + return 0; + /* + * And we need the hwmask associated with the c0_compare + * vector to be initialized. + */ + irq_hwmask[irq] = (0x100 << cp0_compare_irq); + if (cp0_timer_irq_installed) + return 0; + + cp0_timer_irq_installed = 1; + + setup_irq(irq, &c0_compare_irqaction); + + return 0; +} diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 11c92dc53791..e621fda8ab37 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -54,14 +54,18 @@ extern void r4k_wait(void); * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes * using this version a gamble. */ -static void r4k_wait_irqoff(void) +void r4k_wait_irqoff(void) { local_irq_disable(); if (!need_resched()) - __asm__(" .set mips3 \n" + __asm__(" .set push \n" + " .set mips3 \n" " wait \n" - " .set mips0 \n"); + " .set pop \n"); local_irq_enable(); + __asm__(" .globl __pastwait \n" + "__pastwait: \n"); + return; } /* diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index f886dd7f708e..01dcbe38fa01 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -282,8 +282,8 @@ NESTED(except_vec_vi_handler, 0, sp) and t0, a0, t1 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP mfc0 t2, CP0_TCCONTEXT - or t0, t0, t2 - mtc0 t0, CP0_TCCONTEXT + or t2, t0, t2 + mtc0 t2, CP0_TCCONTEXT #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ xor t1, t1, t0 mtc0 t1, CP0_STATUS diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 39b491b9ad87..897fb2b4751c 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1,4 +1,21 @@ -/* Copyright (C) 2004 Mips Technologies, Inc */ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2004 Mips Technologies, Inc + * Copyright (C) 2008 Kevin D. Kissell + */ #include #include @@ -21,7 +38,6 @@ #include #include #include -#include #include /* @@ -58,11 +74,6 @@ unsigned long irq_hwmask[NR_IRQS]; asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; -/* - * Clock interrupt "latch" buffers, per "CPU" - */ - -static atomic_t ipi_timer_latch[NR_CPUS]; /* * Number of InterProcessor Interrupt (IPI) message buffers to allocate @@ -282,7 +293,7 @@ static void smtc_configure_tlb(void) * phys_cpu_present_map and the logical/physical mappings. */ -int __init mipsmt_build_cpu_map(int start_cpu_slot) +int __init smtc_build_cpu_map(int start_cpu_slot) { int i, ntcs; @@ -325,7 +336,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A); - write_tc_c0_tccontext(0); + /* + * TCContext gets an offset from the base of the IPIQ array + * to be used in low-level code to detect the presence of + * an active IPI queue + */ + write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16); /* Bind tc to vpe */ write_tc_c0_tcbind(vpe); /* In general, all TCs should have the same cpu_data indications */ @@ -336,10 +352,18 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) cpu_data[cpu].options &= ~MIPS_CPU_FPU; cpu_data[cpu].vpe_id = vpe; cpu_data[cpu].tc_id = tc; + /* Multi-core SMTC hasn't been tested, but be prepared */ + cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff; } +/* + * Tweak to get Count registes in as close a sync as possible. + * Value seems good for 34K-class cores. + */ + +#define CP0_SKEW 8 -void mipsmt_prepare_cpus(void) +void smtc_prepare_cpus(int cpus) { int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu; unsigned long flags; @@ -363,13 +387,13 @@ void mipsmt_prepare_cpus(void) IPIQ[i].head = IPIQ[i].tail = NULL; spin_lock_init(&IPIQ[i].lock); IPIQ[i].depth = 0; - atomic_set(&ipi_timer_latch[i], 0); } /* cpu_data index starts at zero */ cpu = 0; cpu_data[cpu].vpe_id = 0; cpu_data[cpu].tc_id = 0; + cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff; cpu++; /* Report on boot-time options */ @@ -484,7 +508,8 @@ void mipsmt_prepare_cpus(void) write_vpe_c0_compare(0); /* Propagate Config7 */ write_vpe_c0_config7(read_c0_config7()); - write_vpe_c0_count(read_c0_count()); + write_vpe_c0_count(read_c0_count() + CP0_SKEW); + ehb(); } /* enable multi-threading within VPE */ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE); @@ -585,24 +610,22 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle) void smtc_init_secondary(void) { - /* - * Start timer on secondary VPEs if necessary. - * plat_timer_setup has already have been invoked by init/main - * on "boot" TC. Like per_cpu_trap_init() hack, this assumes that - * SMTC init code assigns TCs consdecutively and in ascending order - * to across available VPEs. - */ - if (((read_c0_tcbind() & TCBIND_CURTC) != 0) && - ((read_c0_tcbind() & TCBIND_CURVPE) - != cpu_data[smp_processor_id() - 1].vpe_id)){ - write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); - } - local_irq_enable(); } void smtc_smp_finish(void) { + int cpu = smp_processor_id(); + + /* + * Lowest-numbered CPU per VPE starts a clock tick. + * Like per_cpu_trap_init() hack, this assumes that + * SMTC init code assigns TCs consdecutively and + * in ascending order across available VPEs. + */ + if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id)) + write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); + printk("TC %d going on-line as CPU %d\n", cpu_data[smp_processor_id()].tc_id, smp_processor_id()); } @@ -755,6 +778,8 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) struct smtc_ipi *pipi; unsigned long flags; int mtflags; + unsigned long tcrestart; + extern void r4k_wait_irqoff(void), __pastwait(void); if (cpu == smp_processor_id()) { printk("Cannot Send IPI to self!\n"); @@ -771,8 +796,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) pipi->arg = (void *)action; pipi->dest = cpu; if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { - if (type == SMTC_CLOCK_TICK) - atomic_inc(&ipi_timer_latch[cpu]); /* If not on same VPE, enqueue and send cross-VPE interrupt */ smtc_ipi_nq(&IPIQ[cpu], pipi); LOCK_CORE_PRA(); @@ -800,22 +823,29 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) if ((tcstatus & TCSTATUS_IXMT) != 0) { /* - * Spin-waiting here can deadlock, - * so we queue the message for the target TC. + * If we're in the the irq-off version of the wait + * loop, we need to force exit from the wait and + * do a direct post of the IPI. + */ + if (cpu_wait == r4k_wait_irqoff) { + tcrestart = read_tc_c0_tcrestart(); + if (tcrestart >= (unsigned long)r4k_wait_irqoff + && tcrestart < (unsigned long)__pastwait) { + write_tc_c0_tcrestart(__pastwait); + tcstatus &= ~TCSTATUS_IXMT; + write_tc_c0_tcstatus(tcstatus); + goto postdirect; + } + } + /* + * Otherwise we queue the message for the target TC + * to pick up when he does a local_irq_restore() */ write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); - /* Try to reduce redundant timer interrupt messages */ - if (type == SMTC_CLOCK_TICK) { - if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){ - smtc_ipi_nq(&freeIPIq, pipi); - return; - } - } smtc_ipi_nq(&IPIQ[cpu], pipi); } else { - if (type == SMTC_CLOCK_TICK) - atomic_inc(&ipi_timer_latch[cpu]); +postdirect: post_direct_ipi(cpu, pipi); write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); @@ -883,7 +913,7 @@ static void ipi_call_interrupt(void) smp_call_function_interrupt(); } -DECLARE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device); +DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); void ipi_decode(struct smtc_ipi *pipi) { @@ -891,20 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi) struct clock_event_device *cd; void *arg_copy = pipi->arg; int type_copy = pipi->type; - int ticks; - smtc_ipi_nq(&freeIPIq, pipi); switch (type_copy) { case SMTC_CLOCK_TICK: irq_enter(); kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++; - cd = &per_cpu(smtc_dummy_clockevent_device, cpu); - ticks = atomic_read(&ipi_timer_latch[cpu]); - atomic_sub(ticks, &ipi_timer_latch[cpu]); - while (ticks) { - cd->event_handler(cd); - ticks--; - } + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); irq_exit(); break; @@ -937,24 +960,48 @@ void ipi_decode(struct smtc_ipi *pipi) } } +/* + * Similar to smtc_ipi_replay(), but invoked from context restore, + * so it reuses the current exception frame rather than set up a + * new one with self_ipi. + */ + void deferred_smtc_ipi(void) { - struct smtc_ipi *pipi; - unsigned long flags; -/* DEBUG */ - int q = smp_processor_id(); + int cpu = smp_processor_id(); /* * Test is not atomic, but much faster than a dequeue, * and the vast majority of invocations will have a null queue. + * If irq_disabled when this was called, then any IPIs queued + * after we test last will be taken on the next irq_enable/restore. + * If interrupts were enabled, then any IPIs added after the + * last test will be taken directly. */ - if (IPIQ[q].head != NULL) { - while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) { - /* ipi_decode() should be called with interrupts off */ - local_irq_save(flags); + + while (IPIQ[cpu].head != NULL) { + struct smtc_ipi_q *q = &IPIQ[cpu]; + struct smtc_ipi *pipi; + unsigned long flags; + + /* + * It may be possible we'll come in with interrupts + * already enabled. + */ + local_irq_save(flags); + + spin_lock(&q->lock); + pipi = __smtc_ipi_dq(q); + spin_unlock(&q->lock); + if (pipi != NULL) ipi_decode(pipi); - local_irq_restore(flags); - } + /* + * The use of the __raw_local restore isn't + * as obviously necessary here as in smtc_ipi_replay(), + * but it's more efficient, given that we're already + * running down the IPI queue. + */ + __raw_local_irq_restore(flags); } } @@ -1066,55 +1113,53 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe) /* * SMTC-specific hacks invoked from elsewhere in the kernel. - * - * smtc_ipi_replay is called from raw_local_irq_restore which is only ever - * called with interrupts disabled. We do rely on interrupts being disabled - * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would - * result in a recursive call to raw_local_irq_restore(). */ -static void __smtc_ipi_replay(void) + /* + * smtc_ipi_replay is called from raw_local_irq_restore + */ + +void smtc_ipi_replay(void) { unsigned int cpu = smp_processor_id(); /* * To the extent that we've ever turned interrupts off, * we may have accumulated deferred IPIs. This is subtle. - * If we use the smtc_ipi_qdepth() macro, we'll get an - * exact number - but we'll also disable interrupts - * and create a window of failure where a new IPI gets - * queued after we test the depth but before we re-enable - * interrupts. So long as IXMT never gets set, however, * we should be OK: If we pick up something and dispatch * it here, that's great. If we see nothing, but concurrent * with this operation, another TC sends us an IPI, IXMT * is clear, and we'll handle it as a real pseudo-interrupt - * and not a pseudo-pseudo interrupt. + * and not a pseudo-pseudo interrupt. The important thing + * is to do the last check for queued message *after* the + * re-enabling of interrupts. */ - if (IPIQ[cpu].depth > 0) { - while (1) { - struct smtc_ipi_q *q = &IPIQ[cpu]; - struct smtc_ipi *pipi; - extern void self_ipi(struct smtc_ipi *); - - spin_lock(&q->lock); - pipi = __smtc_ipi_dq(q); - spin_unlock(&q->lock); - if (!pipi) - break; + while (IPIQ[cpu].head != NULL) { + struct smtc_ipi_q *q = &IPIQ[cpu]; + struct smtc_ipi *pipi; + unsigned long flags; + /* + * It's just possible we'll come in with interrupts + * already enabled. + */ + local_irq_save(flags); + + spin_lock(&q->lock); + pipi = __smtc_ipi_dq(q); + spin_unlock(&q->lock); + /* + ** But use a raw restore here to avoid recursion. + */ + __raw_local_irq_restore(flags); + + if (pipi) { self_ipi(pipi); smtc_cpu_stats[cpu].selfipis++; } } } -void smtc_ipi_replay(void) -{ - raw_local_irq_disable(); - __smtc_ipi_replay(); -} - EXPORT_SYMBOL(smtc_ipi_replay); void smtc_idle_loop_hook(void) @@ -1193,40 +1238,13 @@ void smtc_idle_loop_hook(void) } } - /* - * Now that we limit outstanding timer IPIs, check for hung TC - */ - for (tc = 0; tc < NR_CPUS; tc++) { - /* Don't check ourself - we'll dequeue IPIs just below */ - if ((tc != smp_processor_id()) && - atomic_read(&ipi_timer_latch[tc]) > timerq_limit) { - if (clock_hang_reported[tc] == 0) { - pdb_msg += sprintf(pdb_msg, - "TC %d looks hung with timer latch at %d\n", - tc, atomic_read(&ipi_timer_latch[tc])); - clock_hang_reported[tc]++; - } - } - } emt(mtflags); local_irq_restore(flags); if (pdb_msg != &id_ho_db_msg[0]) printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg); #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */ - /* - * Replay any accumulated deferred IPIs. If "Instant Replay" - * is in use, there should never be any. - */ -#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY - { - unsigned long flags; - - local_irq_save(flags); - __smtc_ipi_replay(); - local_irq_restore(flags); - } -#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */ + smtc_ipi_replay(); } void smtc_soft_dump(void) @@ -1242,10 +1260,6 @@ void smtc_soft_dump(void) printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis); } smtc_ipi_qdump(); - printk("Timer IPI Backlogs:\n"); - for (i=0; i < NR_CPUS; i++) { - printk("%d: %d\n", i, atomic_read(&ipi_timer_latch[i])); - } printk("%d Recoveries of \"stolen\" FPU\n", atomic_read(&smtc_fpu_recoveries)); } diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c index 5ea705e49454..f84a46a8ae6e 100644 --- a/arch/mips/mti-malta/malta-smtc.c +++ b/arch/mips/mti-malta/malta-smtc.c @@ -84,12 +84,17 @@ static void msmtc_cpus_done(void) static void __init msmtc_smp_setup(void) { - mipsmt_build_cpu_map(0); + /* + * we won't get the definitive value until + * we've run smtc_prepare_cpus later, but + * we would appear to need an upper bound now. + */ + smp_num_siblings = smtc_build_cpu_map(0); } static void __init msmtc_prepare_cpus(unsigned int max_cpus) { - mipsmt_prepare_cpus(); + smtc_prepare_cpus(max_cpus); } struct plat_smp_ops msmtc_smp_ops = { diff --git a/include/asm-mips/cevt-r4k.h b/include/asm-mips/cevt-r4k.h new file mode 100644 index 000000000000..fa4328f9124f --- /dev/null +++ b/include/asm-mips/cevt-r4k.h @@ -0,0 +1,46 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Kevin D. Kissell + */ + +/* + * Definitions used for common event timer implementation + * for MIPS 4K-type processors and their MIPS MT variants. + * Avoids unsightly extern declarations in C files. + */ +#ifndef __ASM_CEVT_R4K_H +#define __ASM_CEVT_R4K_H + +DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); + +void mips_event_handler(struct clock_event_device *dev); +int c0_compare_int_usable(void); +void mips_set_clock_mode(enum clock_event_mode, struct clock_event_device *); +irqreturn_t c0_compare_interrupt(int, void *); + +extern struct irqaction c0_compare_irqaction; +extern int cp0_timer_irq_installed; + +/* + * Possibly handle a performance counter interrupt. + * Return true if the timer interrupt should not be checked + */ + +static inline int handle_perf_irq(int r2) +{ + /* + * The performance counter overflow interrupt may be shared with the + * timer interrupt (cp0_perfcount_irq < 0). If it is and a + * performance counter has overflowed (perf_irq() == IRQ_HANDLED) + * and we can't reliably determine if a counter interrupt has also + * happened (!r2) then don't check for a timer interrupt. + */ + return (cp0_perfcount_irq < 0) && + perf_irq() == IRQ_HANDLED && + !r2; +} + +#endif /* __ASM_CEVT_R4K_H */ diff --git a/include/asm-mips/irqflags.h b/include/asm-mips/irqflags.h index 881e8866501d..701ec0ba8fa9 100644 --- a/include/asm-mips/irqflags.h +++ b/include/asm-mips/irqflags.h @@ -38,8 +38,17 @@ __asm__( " .set pop \n" " .endm"); +extern void smtc_ipi_replay(void); + static inline void raw_local_irq_enable(void) { +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC kernel needs to do a software replay of queued + * IPIs, at the cost of call overhead on each local_irq_enable() + */ + smtc_ipi_replay(); +#endif __asm__ __volatile__( "raw_local_irq_enable" : /* no outputs */ @@ -47,6 +56,7 @@ static inline void raw_local_irq_enable(void) : "memory"); } + /* * For cli() we have to insert nops to make sure that the new value * has actually arrived in the status register before the end of this @@ -185,15 +195,14 @@ __asm__( " .set pop \n" " .endm \n"); -extern void smtc_ipi_replay(void); static inline void raw_local_irq_restore(unsigned long flags) { unsigned long __tmp1; -#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY +#ifdef CONFIG_MIPS_MT_SMTC /* - * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred + * SMTC kernel needs to do a software replay of queued * IPIs, at the cost of branch and call overhead on each * local_irq_restore() */ @@ -208,6 +217,17 @@ static inline void raw_local_irq_restore(unsigned long flags) : "memory"); } +static inline void __raw_local_irq_restore(unsigned long flags) +{ + unsigned long __tmp1; + + __asm__ __volatile__( + "raw_local_irq_restore\t%0" + : "=r" (__tmp1) + : "0" (flags) + : "memory"); +} + static inline int raw_irqs_disabled_flags(unsigned long flags) { #ifdef CONFIG_MIPS_MT_SMTC diff --git a/include/asm-mips/smtc.h b/include/asm-mips/smtc.h index 3639b28f80db..ea60bf08dcb0 100644 --- a/include/asm-mips/smtc.h +++ b/include/asm-mips/smtc.h @@ -6,6 +6,7 @@ */ #include +#include /* * System-wide SMTC status information @@ -38,14 +39,15 @@ struct mm_struct; struct task_struct; void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu); - +void self_ipi(struct smtc_ipi *); void smtc_flush_tlb_asid(unsigned long asid); -extern int mipsmt_build_cpu_map(int startslot); -extern void mipsmt_prepare_cpus(void); +extern int smtc_build_cpu_map(int startslot); +extern void smtc_prepare_cpus(int cpus); extern void smtc_smp_finish(void); extern void smtc_boot_secondary(int cpu, struct task_struct *t); extern void smtc_cpus_done(void); + /* * Sharing the TLB between multiple VPEs means that the * "random" index selection function is not allowed to -- cgit v1.2.3 From 2fef357cf391b56b8b6952a412f7324e50427a77 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 5 Oct 2008 18:23:28 +0200 Subject: IDE: Fix platform device registration in Swarm IDE driver (v2) The Swarm IDE driver uses a release method which is defined in the driver itself thus potentially oopsable. The simple fix would be to just leak the device but this patch goes the full length and moves the entire handling of the platform device in the platform code and retains only the platform driver code in drivers/ide/mips/swarm.c. Signed-off-by: Ralf Baechle Cc: "Maciej W. Rozycki" Acked-by: Sergei Shtylyov [bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig] Signed-off-by: Bartlomiej Zolnierkiewicz --- arch/mips/sibyte/swarm/Makefile | 3 +- arch/mips/sibyte/swarm/platform.c | 81 ++++++++++++++++ drivers/ide/Kconfig | 4 - drivers/ide/mips/Makefile | 1 - drivers/ide/mips/swarm.c | 197 -------------------------------------- 5 files changed, 83 insertions(+), 203 deletions(-) create mode 100644 arch/mips/sibyte/swarm/platform.c delete mode 100644 drivers/ide/mips/swarm.c (limited to 'arch/mips') diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index f18ba9201bbc..7b45f199d92a 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,3 +1,4 @@ -obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o +obj-y := platform.o setup.o rtc_xicor1241.o \ + rtc_m41t81.o obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c new file mode 100644 index 000000000000..dd0e5b9b64e8 --- /dev/null +++ b/arch/mips/sibyte/swarm/platform.c @@ -0,0 +1,81 @@ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define DRV_NAME "pata-swarm" + +#define SWARM_IDE_SHIFT 5 +#define SWARM_IDE_BASE 0x1f0 +#define SWARM_IDE_CTRL 0x3f6 + +static struct resource swarm_pata_resource[] = { + { + .name = "Swarm GenBus IDE", + .flags = IORESOURCE_MEM, + }, { + .name = "Swarm GenBus IDE", + .flags = IORESOURCE_MEM, + }, { + .name = "Swarm GenBus IDE", + .flags = IORESOURCE_IRQ, + .start = K_INT_GB_IDE, + .end = K_INT_GB_IDE, + }, +}; + +static struct pata_platform_info pata_platform_data = { + .ioport_shift = SWARM_IDE_SHIFT, +}; + +static struct platform_device swarm_pata_device = { + .name = "pata_platform", + .id = -1, + .resource = swarm_pata_resource, + .num_resources = ARRAY_SIZE(swarm_pata_resource), + .dev = { + .platform_data = &pata_platform_data, + .coherent_dma_mask = ~0, /* grumble */ + }, +}; + +static int __init swarm_pata_init(void) +{ + u8 __iomem *base; + phys_t offset, size; + struct resource *r; + + if (!SIBYTE_HAVE_IDE) + return -ENODEV; + + base = ioremap(A_IO_EXT_BASE, 0x800); + offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); + size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); + iounmap(base); + + offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE; + size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE; + if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) { + pr_info(DRV_NAME ": PATA interface at GenBus disabled\n"); + + return -EBUSY; + } + + pr_info(DRV_NAME ": PATA interface at GenBus slot %i\n", IDE_CS); + + r = swarm_pata_resource; + r[0].start = offset + (SWARM_IDE_BASE << SWARM_IDE_SHIFT); + r[0].end = offset + ((SWARM_IDE_BASE + 8) << SWARM_IDE_SHIFT) - 1; + r[1].start = offset + (SWARM_IDE_CTRL << SWARM_IDE_SHIFT); + r[1].end = offset + ((SWARM_IDE_CTRL + 1) << SWARM_IDE_SHIFT) - 1; + + return platform_device_register(&swarm_pata_device); +} + +device_initcall(swarm_pata_init); diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 8e93a797c93d..052879a6f853 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -780,10 +780,6 @@ config BLK_DEV_IDEDMA_PMAC to transfer data to and from memory. Saying Y is safe and improves performance. -config BLK_DEV_IDE_SWARM - tristate "IDE for Sibyte evaluation boards" - depends on SIBYTE_SB1xxx_SOC - config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile index 677c7b2bac92..5873fa0b8769 100644 --- a/drivers/ide/mips/Makefile +++ b/drivers/ide/mips/Makefile @@ -1,4 +1,3 @@ -obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c deleted file mode 100644 index 39c9ee995857..000000000000 --- a/drivers/ide/mips/swarm.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * Copyright (C) 2001, 2002, 2003 Broadcom Corporation - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved. - * Author: Maciej W. Rozycki - * Copyright (c) 2006, 2008 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - * Derived loosely from ide-pmac.c, so: - * Copyright (C) 1998 Paul Mackerras. - * Copyright (C) 1995-1998 Mark Lord - */ - -/* - * Boards with SiByte processors so far have supported IDE devices via - * the Generic Bus, PCI bus, and built-in PCMCIA interface. In all - * cases, byte-swapping must be avoided for these devices (whereas - * other PCI devices, for example, will require swapping). Any - * SiByte-targetted kernel including IDE support will include this - * file. Probing of a Generic Bus for an IDE device is controlled by - * the definition of "SIBYTE_HAVE_IDE", which is provided by - * for Broadcom boards. - */ - -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -#define DRV_NAME "ide-swarm" - -static char swarm_ide_string[] = DRV_NAME; - -static struct resource swarm_ide_resource = { - .name = "SWARM GenBus IDE", - .flags = IORESOURCE_MEM, -}; - -static struct platform_device *swarm_ide_dev; - -static const struct ide_port_info swarm_port_info = { - .name = DRV_NAME, - .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, -}; - -/* - * swarm_ide_probe - if the board header indicates the existence of - * Generic Bus IDE, allocate a HWIF for it. - */ -static int __devinit swarm_ide_probe(struct device *dev) -{ - u8 __iomem *base; - struct ide_host *host; - phys_t offset, size; - int i, rc; - hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; - - if (!SIBYTE_HAVE_IDE) - return -ENODEV; - - base = ioremap(A_IO_EXT_BASE, 0x800); - offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); - size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); - iounmap(base); - - offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE; - size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE; - if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) { - printk(KERN_INFO DRV_NAME - ": IDE interface at GenBus disabled\n"); - return -EBUSY; - } - - printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n", - IDE_CS); - - swarm_ide_resource.start = offset; - swarm_ide_resource.end = offset + size - 1; - if (request_resource(&iomem_resource, &swarm_ide_resource)) { - printk(KERN_ERR DRV_NAME - ": can't request I/O memory resource\n"); - return -EBUSY; - } - - base = ioremap(offset, size); - - memset(&hw, 0, sizeof(hw)); - for (i = 0; i <= 7; i++) - hw.io_ports_array[i] = - (unsigned long)(base + ((0x1f0 + i) << 5)); - hw.io_ports.ctl_addr = - (unsigned long)(base + (0x3f6 << 5)); - hw.irq = K_INT_GB_IDE; - hw.chipset = ide_generic; - - rc = ide_host_add(&swarm_port_info, hws, &host); - if (rc) - goto err; - - dev_set_drvdata(dev, host); - - return 0; -err: - release_resource(&swarm_ide_resource); - iounmap(base); - return rc; -} - -static struct device_driver swarm_ide_driver = { - .name = swarm_ide_string, - .bus = &platform_bus_type, - .probe = swarm_ide_probe, -}; - -static void swarm_ide_platform_release(struct device *device) -{ - struct platform_device *pldev; - - /* free device */ - pldev = to_platform_device(device); - kfree(pldev); -} - -static int __devinit swarm_ide_init_module(void) -{ - struct platform_device *pldev; - int err; - - printk(KERN_INFO "SWARM IDE driver\n"); - - if (driver_register(&swarm_ide_driver)) { - printk(KERN_ERR "Driver registration failed\n"); - err = -ENODEV; - goto out; - } - - if (!(pldev = kzalloc(sizeof (*pldev), GFP_KERNEL))) { - err = -ENOMEM; - goto out_unregister_driver; - } - - pldev->name = swarm_ide_string; - pldev->id = 0; - pldev->dev.release = swarm_ide_platform_release; - - if (platform_device_register(pldev)) { - err = -ENODEV; - goto out_free_pldev; - } - - if (!pldev->dev.driver) { - /* - * The driver was not bound to this device, there was - * no hardware at this address. Unregister it, as the - * release fuction will take care of freeing the - * allocated structure - */ - platform_device_unregister (pldev); - } - - swarm_ide_dev = pldev; - - return 0; - -out_free_pldev: - kfree(pldev); - -out_unregister_driver: - driver_unregister(&swarm_ide_driver); -out: - return err; -} - -module_init(swarm_ide_init_module); -- cgit v1.2.3 From 4a16ff4c692d49f0caeabe08e6d3ae28a0ad4d04 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 4 Oct 2008 00:06:29 +0100 Subject: [MIPS] Fix CMP Kconfig configuration and mark as broken. Because sync-r4k.c doesn't build. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index c930b8ceb418..1e06d233fa83 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -211,6 +211,7 @@ config MIPS_MALTA select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_SMARTMIPS help @@ -1499,6 +1500,18 @@ config MIPS_APSP_KSPD "exit" syscall notifying other kernel modules the SP program is exiting. You probably want to say yes here. +config MIPS_CMP + bool "MIPS CMP framework support" + depends on SYS_SUPPORTS_MIPS_CMP + select SYNC_R4K if BROKEN + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_SCHED_SMT if SMP + select WEAK_ORDERING + default n + help + This is a placeholder option for the GCMP work. It will need to + be handled differently... + config SB1_PASS_1_WORKAROUNDS bool depends on CPU_SB1_PASS_1 @@ -1675,6 +1688,9 @@ config SMP config SMP_UP bool +config SYS_SUPPORTS_MIPS_CMP + bool + config SYS_SUPPORTS_SMP bool @@ -1722,17 +1738,6 @@ config NR_CPUS performance should round up your number of processors to the next power of two. -config MIPS_CMP - bool "MIPS CMP framework support" - depends on SMP - select SYNC_R4K - select SYS_SUPPORTS_SCHED_SMT - select WEAK_ORDERING - default n - help - This is a placeholder option for the GCMP work. It will need to - be handled differently... - source "kernel/time/Kconfig" # -- cgit v1.2.3 From fd3d2764ee5aad862e51c21b8239561acdea8c2f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 3 Oct 2008 22:43:38 +0100 Subject: [MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y Signed-off-by: Ralf Baechle --- arch/mips/kernel/head.S | 1 + include/asm-mips/sn/mapped_kernel.h | 8 ++++---- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 361364501d34..492a0a8d70fb 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -22,6 +22,7 @@ #include #include #include +#include #include #include diff --git a/include/asm-mips/sn/mapped_kernel.h b/include/asm-mips/sn/mapped_kernel.h index c3dd5d0d525f..721496a0bb92 100644 --- a/include/asm-mips/sn/mapped_kernel.h +++ b/include/asm-mips/sn/mapped_kernel.h @@ -5,6 +5,8 @@ #ifndef __ASM_SN_MAPPED_KERNEL_H #define __ASM_SN_MAPPED_KERNEL_H +#include + /* * Note on how mapped kernels work: the text and data section is * compiled at cksseg segment (LOADADDR = 0xc001c000), and the @@ -29,10 +31,8 @@ #define MAPPED_ADDR_RO_TO_PHYS(x) (x - REP_BASE) #define MAPPED_ADDR_RW_TO_PHYS(x) (x - REP_BASE - 16777216) -#define MAPPED_KERN_RO_PHYSBASE(n) \ - (PLAT_NODE_DATA(n)->kern_vars.kv_ro_baseaddr) -#define MAPPED_KERN_RW_PHYSBASE(n) \ - (PLAT_NODE_DATA(n)->kern_vars.kv_rw_baseaddr) +#define MAPPED_KERN_RO_PHYSBASE(n) (hub_data(n)->kern_vars.kv_ro_baseaddr) +#define MAPPED_KERN_RW_PHYSBASE(n) (hub_data(n)->kern_vars.kv_rw_baseaddr) #define MAPPED_KERN_RO_TO_PHYS(x) \ ((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \ -- cgit v1.2.3 From 8806048878fce541afe1d72cd2320f092519f90a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 8 Oct 2008 19:14:33 +0100 Subject: [MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte Sur Symbol name spaghetti which is too complicated to cleanup on this stage of the release cycle breaks the build on BCM1480 platforms. Signed-off-by: Ralf Baechle --- arch/mips/sibyte/swarm/platform.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c index dd0e5b9b64e8..54847fe1e564 100644 --- a/arch/mips/sibyte/swarm/platform.c +++ b/arch/mips/sibyte/swarm/platform.c @@ -9,6 +9,8 @@ #include #include +#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR) + #define DRV_NAME "pata-swarm" #define SWARM_IDE_SHIFT 5 @@ -79,3 +81,5 @@ static int __init swarm_pata_init(void) } device_initcall(swarm_pata_init); + +#endif /* defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR) */ -- cgit v1.2.3 From 5d9a76cd0ed367d01b0b237253adb7607e86a277 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Sun, 17 Aug 2008 16:49:25 +0200 Subject: MIPS: Use compat_sys_ptrace This replaces mips's sys_ptrace32 with a compat_arch_ptrace and enables the new generic definition of compat_sys_ptrace instead. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/kernel/ptrace32.c | 43 ++++++++---------------------------------- arch/mips/kernel/scall64-n32.S | 2 +- arch/mips/kernel/scall64-o32.S | 2 +- arch/mips/kernel/signal32.c | 12 ++++++++++++ include/asm-mips/ptrace.h | 3 +++ 5 files changed, 25 insertions(+), 37 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c index 76818be6ba7c..cac56a8c8679 100644 --- a/arch/mips/kernel/ptrace32.c +++ b/arch/mips/kernel/ptrace32.c @@ -15,6 +15,7 @@ * binaries. */ #include +#include #include #include #include @@ -46,37 +47,13 @@ int ptrace_setfpregs(struct task_struct *child, __u32 __user *data); * Tracing a 32-bit process with a 64-bit strace and vice versa will not * work. I don't know how to fix this. */ -asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) +long compat_arch_ptrace(struct task_struct *child, compat_long_t request, + compat_ulong_t caddr, compat_ulong_t cdata) { - struct task_struct *child; + int addr = caddr; + int data = cdata; int ret; -#if 0 - printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n", - (int) request, (int) pid, (unsigned long) addr, - (unsigned long) data); -#endif - lock_kernel(); - if (request == PTRACE_TRACEME) { - ret = ptrace_traceme(); - goto out; - } - - child = ptrace_get_task_struct(pid); - if (IS_ERR(child)) { - ret = PTR_ERR(child); - goto out; - } - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -214,7 +191,7 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) if (!cpu_has_dsp) { tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } dregs = __get_dsp_regs(child); tmp = (unsigned long) (dregs[addr - DSP_BASE]); @@ -224,14 +201,14 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) if (!cpu_has_dsp) { tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } tmp = child->thread.dsp.dspcontrol; break; default: tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } ret = put_user(tmp, (unsigned __user *) (unsigned long) data); break; @@ -414,10 +391,6 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) ret = ptrace_request(child, request, addr, data); break; } - -out_tsk: - put_task_struct(child); out: - unlock_kernel(); return ret; } diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index da7f1b6ea0fb..324c5499dec2 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -219,7 +219,7 @@ EXPORT(sysn32_call_table) PTR compat_sys_getrusage PTR compat_sys_sysinfo PTR compat_sys_times - PTR sys32_ptrace + PTR compat_sys_ptrace PTR sys_getuid /* 6100 */ PTR sys_syslog PTR sys_getgid diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index d7cd1aac9ada..85fedac99a57 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -231,7 +231,7 @@ sys_call_table: PTR sys_setuid PTR sys_getuid PTR compat_sys_stime /* 4025 */ - PTR sys32_ptrace + PTR compat_sys_ptrace PTR sys_alarm PTR sys_ni_syscall /* was sys_fstat */ PTR sys_pause diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 572c610db1b1..652709b353ad 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -482,6 +482,18 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) return err; } +int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) +{ + memset(to, 0, sizeof *to); + + if (copy_from_user(to, from, 3*sizeof(int)) || + copy_from_user(to->_sifields._pad, + from->_sifields._pad, SI_PAD_SIZE32)) + return -EFAULT; + + return 0; +} + asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs) { struct sigframe32 __user *frame; diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h index 786f7e3c99bc..c00cca24dae0 100644 --- a/include/asm-mips/ptrace.h +++ b/include/asm-mips/ptrace.h @@ -9,6 +9,9 @@ #ifndef _ASM_PTRACE_H #define _ASM_PTRACE_H +#ifdef CONFIG_64BIT +#define __ARCH_WANT_COMPAT_SYS_PTRACE +#endif /* 0 - 31 are integer registers, 32 - 63 are fp registers. */ #define FPR_BASE 32 -- cgit v1.2.3 From 9fa32c6b0275ab1e8b19f74fbfa3ed8411345db6 Mon Sep 17 00:00:00 2001 From: Patrick Glass Date: Mon, 18 Aug 2008 14:41:30 -0700 Subject: MIPS: PMC MSP71XX gpio drivers This new gpio driver for PMC-Sierra's MSP71xx SoC allows standard api calls for access to the general and extended gpio's. Signed-off-by: Patrick Glass Signed-off-by: Ralf Baechle create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio.c create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio_extended.c create mode 100755 include/asm-mips/pmc-sierra/msp71xx/gpio.h --- arch/mips/pmc-sierra/msp71xx/Makefile | 1 + arch/mips/pmc-sierra/msp71xx/gpio.c | 218 +++++++++++++++++++++++++++ arch/mips/pmc-sierra/msp71xx/gpio_extended.c | 148 ++++++++++++++++++ include/asm-mips/pmc-sierra/msp71xx/gpio.h | 46 ++++++ 4 files changed, 413 insertions(+) create mode 100644 arch/mips/pmc-sierra/msp71xx/gpio.c create mode 100644 arch/mips/pmc-sierra/msp71xx/gpio_extended.c create mode 100644 include/asm-mips/pmc-sierra/msp71xx/gpio.h (limited to 'arch/mips') diff --git a/arch/mips/pmc-sierra/msp71xx/Makefile b/arch/mips/pmc-sierra/msp71xx/Makefile index 4bba79c1cc79..e107f79b1491 100644 --- a/arch/mips/pmc-sierra/msp71xx/Makefile +++ b/arch/mips/pmc-sierra/msp71xx/Makefile @@ -3,6 +3,7 @@ # obj-y += msp_prom.o msp_setup.o msp_irq.o \ msp_time.o msp_serial.o msp_elb.o +obj-$(CONFIG_HAVE_GPIO_LIB) += gpio.o gpio_extended.o obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o diff --git a/arch/mips/pmc-sierra/msp71xx/gpio.c b/arch/mips/pmc-sierra/msp71xx/gpio.c new file mode 100644 index 000000000000..69848c5813e2 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/gpio.c @@ -0,0 +1,218 @@ +/* + * @file /arch/mips/pmc-sierra/msp71xx/gpio.c + * + * Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two + * types of registers. The data register sets the output level when in output + * mode and when in input mode will contain the value at the input. The config + * register sets the various modes for each gpio. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * @author Patrick Glass + */ + +#include +#include +#include +#include +#include +#include + +#define MSP71XX_CFG_OFFSET(gpio) (4 * (gpio)) +#define CONF_MASK 0x0F +#define MSP71XX_GPIO_INPUT 0x01 +#define MSP71XX_GPIO_OUTPUT 0x08 + +#define MSP71XX_GPIO_BASE 0x0B8400000L + +#define to_msp71xx_gpio_chip(c) container_of(c, struct msp71xx_gpio_chip, chip) + +static spinlock_t gpio_lock; + +/* + * struct msp71xx_gpio_chip - container for gpio chip and registers + * @chip: chip structure for the specified gpio bank + * @data_reg: register for reading and writing the gpio pin value + * @config_reg: register to set the mode for the gpio pin bank + * @out_drive_reg: register to set the output drive mode for the gpio pin bank + */ +struct msp71xx_gpio_chip { + struct gpio_chip chip; + void __iomem *data_reg; + void __iomem *config_reg; + void __iomem *out_drive_reg; +}; + +/* + * msp71xx_gpio_get() - return the chip's gpio value + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose value will be returned + * + * It will return 0 if gpio value is low and other if high. + */ +static int msp71xx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip); + + return __raw_readl(msp_chip->data_reg) & (1 << offset); +} + +/* + * msp71xx_gpio_set() - set the output value for the gpio + * @chip: chip structure who controls the specified gpio + * @offset: gpio whose value will be assigned + * @value: logic level to assign to the gpio initially + * + * This will set the gpio bit specified to the desired value. It will set the + * gpio pin low if value is 0 otherwise it will be high. + */ +static void msp71xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip); + unsigned long flags; + u32 data; + + spin_lock_irqsave(&gpio_lock, flags); + + data = __raw_readl(msp_chip->data_reg); + if (value) + data |= (1 << offset); + else + data &= ~(1 << offset); + __raw_writel(data, msp_chip->data_reg); + + spin_unlock_irqrestore(&gpio_lock, flags); +} + +/* + * msp71xx_set_gpio_mode() - declare the mode for a gpio + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose value will be assigned + * @mode: desired configuration for the gpio (see datasheet) + * + * It will set the gpio pin config to the @mode value passed in. + */ +static int msp71xx_set_gpio_mode(struct gpio_chip *chip, + unsigned offset, int mode) +{ + struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip); + const unsigned bit_offset = MSP71XX_CFG_OFFSET(offset); + unsigned long flags; + u32 cfg; + + spin_lock_irqsave(&gpio_lock, flags); + + cfg = __raw_readl(msp_chip->config_reg); + cfg &= ~(CONF_MASK << bit_offset); + cfg |= (mode << bit_offset); + __raw_writel(cfg, msp_chip->config_reg); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +} + +/* + * msp71xx_direction_output() - declare the direction mode for a gpio + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose value will be assigned + * @value: logic level to assign to the gpio initially + * + * This call will set the mode for the @gpio to output. It will set the + * gpio pin low if value is 0 otherwise it will be high. + */ +static int msp71xx_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + msp71xx_gpio_set(chip, offset, value); + + return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_OUTPUT); +} + +/* + * msp71xx_direction_input() - declare the direction mode for a gpio + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose to which the value will be assigned + * + * This call will set the mode for the @gpio to input. + */ +static int msp71xx_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_INPUT); +} + +/* + * msp71xx_set_output_drive() - declare the output drive for the gpio line + * @gpio: gpio pin whose output drive you wish to modify + * @value: zero for active drain 1 for open drain drive + * + * This call will set the output drive mode for the @gpio to output. + */ +int msp71xx_set_output_drive(unsigned gpio, int value) +{ + unsigned long flags; + u32 data; + + if (gpio > 15 || gpio < 0) + return -EINVAL; + + spin_lock_irqsave(&gpio_lock, flags); + + data = __raw_readl((void __iomem *)(MSP71XX_GPIO_BASE + 0x190)); + if (value) + data |= (1 << gpio); + else + data &= ~(1 << gpio); + __raw_writel(data, (void __iomem *)(MSP71XX_GPIO_BASE + 0x190)); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return 0; +} +EXPORT_SYMBOL(msp71xx_set_output_drive); + +#define MSP71XX_GPIO_BANK(name, dr, cr, base_gpio, num_gpio) \ +{ \ + .chip = { \ + .label = name, \ + .direction_input = msp71xx_direction_input, \ + .direction_output = msp71xx_direction_output, \ + .get = msp71xx_gpio_get, \ + .set = msp71xx_gpio_set, \ + .base = base_gpio, \ + .ngpio = num_gpio \ + }, \ + .data_reg = (void __iomem *)(MSP71XX_GPIO_BASE + dr), \ + .config_reg = (void __iomem *)(MSP71XX_GPIO_BASE + cr), \ + .out_drive_reg = (void __iomem *)(MSP71XX_GPIO_BASE + 0x190), \ +} + +/* + * struct msp71xx_gpio_banks[] - container array of gpio banks + * @chip: chip structure for the specified gpio bank + * @data_reg: register for reading and writing the gpio pin value + * @config_reg: register to set the mode for the gpio pin bank + * + * This array structure defines the gpio banks for the PMC MIPS Processor. + * We specify the bank name, the data register, the config register, base + * starting gpio number, and the number of gpios exposed by the bank. + */ +static struct msp71xx_gpio_chip msp71xx_gpio_banks[] = { + + MSP71XX_GPIO_BANK("GPIO_1_0", 0x170, 0x180, 0, 2), + MSP71XX_GPIO_BANK("GPIO_5_2", 0x174, 0x184, 2, 4), + MSP71XX_GPIO_BANK("GPIO_9_6", 0x178, 0x188, 6, 4), + MSP71XX_GPIO_BANK("GPIO_15_10", 0x17C, 0x18C, 10, 6), +}; + +void __init msp71xx_init_gpio(void) +{ + int i; + + spin_lock_init(&gpio_lock); + + for (i = 0; i < ARRAY_SIZE(msp71xx_gpio_banks); i++) + gpiochip_add(&msp71xx_gpio_banks[i].chip); +} diff --git a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c new file mode 100644 index 000000000000..fc6dbc6cf1c0 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c @@ -0,0 +1,148 @@ +/* + * @file /arch/mips/pmc-sierra/msp71xx/gpio_extended.c + * + * Generic PMC MSP71xx EXTENDED (EXD) GPIO handling. The extended gpio is + * a set of hardware registers that have no need for explicit locking as + * it is handled by unique method of writing individual set/clr bits. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * @author Patrick Glass + */ + +#include +#include +#include +#include +#include + +#define MSP71XX_DATA_OFFSET(gpio) (2 * (gpio)) +#define MSP71XX_READ_OFFSET(gpio) (MSP71XX_DATA_OFFSET(gpio) + 1) +#define MSP71XX_CFG_OUT_OFFSET(gpio) (MSP71XX_DATA_OFFSET(gpio) + 16) +#define MSP71XX_CFG_IN_OFFSET(gpio) (MSP71XX_CFG_OUT_OFFSET(gpio) + 1) + +#define MSP71XX_EXD_GPIO_BASE 0x0BC000000L + +#define to_msp71xx_exd_gpio_chip(c) \ + container_of(c, struct msp71xx_exd_gpio_chip, chip) + +/* + * struct msp71xx_exd_gpio_chip - container for gpio chip and registers + * @chip: chip structure for the specified gpio bank + * @reg: register for control and data of gpio pin + */ +struct msp71xx_exd_gpio_chip { + struct gpio_chip chip; + void __iomem *reg; +}; + +/* + * msp71xx_exd_gpio_get() - return the chip's gpio value + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose value will be returned + * + * It will return 0 if gpio value is low and other if high. + */ +static int msp71xx_exd_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct msp71xx_exd_gpio_chip *msp71xx_chip = + to_msp71xx_exd_gpio_chip(chip); + const unsigned bit = MSP71XX_READ_OFFSET(offset); + + return __raw_readl(msp71xx_chip->reg) & (1 << bit); +} + +/* + * msp71xx_exd_gpio_set() - set the output value for the gpio + * @chip: chip structure who controls the specified gpio + * @offset: gpio whose value will be assigned + * @value: logic level to assign to the gpio initially + * + * This will set the gpio bit specified to the desired value. It will set the + * gpio pin low if value is 0 otherwise it will be high. + */ +static void msp71xx_exd_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct msp71xx_exd_gpio_chip *msp71xx_chip = + to_msp71xx_exd_gpio_chip(chip); + const unsigned bit = MSP71XX_DATA_OFFSET(offset); + + __raw_writel(1 << (bit + (value ? 1 : 0)), msp71xx_chip->reg); +} + +/* + * msp71xx_exd_direction_output() - declare the direction mode for a gpio + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose value will be assigned + * @value: logic level to assign to the gpio initially + * + * This call will set the mode for the @gpio to output. It will set the + * gpio pin low if value is 0 otherwise it will be high. + */ +static int msp71xx_exd_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct msp71xx_exd_gpio_chip *msp71xx_chip = + to_msp71xx_exd_gpio_chip(chip); + + msp71xx_exd_gpio_set(chip, offset, value); + __raw_writel(1 << MSP71XX_CFG_OUT_OFFSET(offset), msp71xx_chip->reg); + return 0; +} + +/* + * msp71xx_exd_direction_input() - declare the direction mode for a gpio + * @chip: chip structure which controls the specified gpio + * @offset: gpio whose to which the value will be assigned + * + * This call will set the mode for the @gpio to input. + */ +static int msp71xx_exd_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct msp71xx_exd_gpio_chip *msp71xx_chip = + to_msp71xx_exd_gpio_chip(chip); + + __raw_writel(1 << MSP71XX_CFG_IN_OFFSET(offset), msp71xx_chip->reg); + return 0; +} + +#define MSP71XX_EXD_GPIO_BANK(name, exd_reg, base_gpio, num_gpio) \ +{ \ + .chip = { \ + .label = name, \ + .direction_input = msp71xx_exd_direction_input, \ + .direction_output = msp71xx_exd_direction_output, \ + .get = msp71xx_exd_gpio_get, \ + .set = msp71xx_exd_gpio_set, \ + .base = base_gpio, \ + .ngpio = num_gpio, \ + }, \ + .reg = (void __iomem *)(MSP71XX_EXD_GPIO_BASE + exd_reg), \ +} + +/* + * struct msp71xx_exd_gpio_banks[] - container array of gpio banks + * @chip: chip structure for the specified gpio bank + * @reg: register for reading and writing the gpio pin value + * + * This array structure defines the extended gpio banks for the + * PMC MIPS Processor. We specify the bank name, the data/config + * register,the base starting gpio number, and the number of + * gpios exposed by the bank of gpios. + */ +static struct msp71xx_exd_gpio_chip msp71xx_exd_gpio_banks[] = { + + MSP71XX_EXD_GPIO_BANK("GPIO_23_16", 0x188, 16, 8), + MSP71XX_EXD_GPIO_BANK("GPIO_27_24", 0x18C, 24, 4), +}; + +void __init msp71xx_init_gpio_extended(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(msp71xx_exd_gpio_banks); i++) + gpiochip_add(&msp71xx_exd_gpio_banks[i].chip); +} diff --git a/include/asm-mips/pmc-sierra/msp71xx/gpio.h b/include/asm-mips/pmc-sierra/msp71xx/gpio.h new file mode 100644 index 000000000000..ebdbab973e41 --- /dev/null +++ b/include/asm-mips/pmc-sierra/msp71xx/gpio.h @@ -0,0 +1,46 @@ +/* + * include/asm-mips/pmc-sierra/msp71xx/gpio.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * @author Patrick Glass + */ + +#ifndef __PMC_MSP71XX_GPIO_H +#define __PMC_MSP71XX_GPIO_H + +/* Max number of gpio's is 28 on chip plus 3 banks of I2C IO Expanders */ +#define ARCH_NR_GPIOS (28 + (3 * 8)) + +/* new generic GPIO API - see Documentation/gpio.txt */ +#include + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep + +/* Setup calls for the gpio and gpio extended */ +extern void msp71xx_init_gpio(void); +extern void msp71xx_init_gpio_extended(void); +extern int msp71xx_set_output_drive(unsigned gpio, int value); + +/* Custom output drive functionss */ +static inline int gpio_set_output_drive(unsigned gpio, int value) +{ + return msp71xx_set_output_drive(gpio, value); +} + +/* IRQ's are not supported for gpio lines */ +static inline int gpio_to_irq(unsigned gpio) +{ + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return -EINVAL; +} + +#endif /* __PMC_MSP71XX_GPIO_H */ -- cgit v1.2.3 From f96a3383cfede841cdf80a5927f14478981ed78c Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:05 +0900 Subject: MIPS: RBTX4927: More explicit initialization * Make sure all interrupts cleared on startup * Initialize some GPIOs Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/rbtx4927/irq.c | 5 +++++ arch/mips/txx9/rbtx4927/setup.c | 9 +++++++++ include/asm-mips/txx9/rbtx4927.h | 2 ++ 3 files changed, 16 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c index 00cd5231da30..22076e3f03a8 100644 --- a/arch/mips/txx9/rbtx4927/irq.c +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -142,6 +142,11 @@ static void __init toshiba_rbtx4927_irq_ioc_init(void) { int i; + /* mask all IOC interrupts */ + writeb(0, rbtx4927_imask_addr); + /* clear SoftInt interrupts */ + writeb(0, rbtx4927_softint_addr); + for (i = RBTX4927_IRQ_IOC; i < RBTX4927_IRQ_IOC + RBTX4927_NR_IRQ_IOC; i++) set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type, diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 0d39bafea794..5985f330838a 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -48,6 +48,7 @@ #include #include #include +#include #include #include #include @@ -212,6 +213,14 @@ static void __init rbtx4927_mem_setup(void) set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); #endif + /* TX4927-SIO DTR on (PIO[15]) */ + gpio_request(15, "sio-dtr"); + gpio_direction_output(15, 1); + gpio_request(0, "led"); + gpio_direction_output(0, 1); + gpio_request(1, "led"); + gpio_direction_output(1, 1); + tx4927_sio_init(0, 0); #ifdef CONFIG_SERIAL_TXX9_CONSOLE argptr = prom_getcmdline(); diff --git a/include/asm-mips/txx9/rbtx4927.h b/include/asm-mips/txx9/rbtx4927.h index 6fcec912c143..c6015463432e 100644 --- a/include/asm-mips/txx9/rbtx4927.h +++ b/include/asm-mips/txx9/rbtx4927.h @@ -36,6 +36,7 @@ #define RBTX4927_IMASK_ADDR (IO_BASE + TXX9_CE(2) + 0x00002000) #define RBTX4927_IMSTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x00002006) +#define RBTX4927_SOFTINT_ADDR (IO_BASE + TXX9_CE(2) + 0x00003000) #define RBTX4927_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f000) #define RBTX4927_SOFTRESETLOCK_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f002) #define RBTX4927_PCIRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f006) @@ -47,6 +48,7 @@ #define rbtx4927_imask_addr ((__u8 __iomem *)RBTX4927_IMASK_ADDR) #define rbtx4927_imstat_addr ((__u8 __iomem *)RBTX4927_IMSTAT_ADDR) +#define rbtx4927_softint_addr ((__u8 __iomem *)RBTX4927_SOFTINT_ADDR) #define rbtx4927_softreset_addr ((__u8 __iomem *)RBTX4927_SOFTRESET_ADDR) #define rbtx4927_softresetlock_addr \ ((__u8 __iomem *)RBTX4927_SOFTRESETLOCK_ADDR) -- cgit v1.2.3 From e0dfb20c2b77c6626a24578240266ace928cd2e7 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:06 +0900 Subject: MIPS: TXx9: Improve handling of built-in and command-line args * Make prom_init_cmdline() static and be called from prom_init. * Append built-in args if the first character was '+'. * Drop command-line args if the first character of built-in was '-'. * Enclose args include spaces by quotes. * TX4938_NAND_BOOT is no longer needed. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/Kconfig | 7 ------- arch/mips/txx9/generic/setup.c | 42 ++++++++++++++++++++++++++++++----------- arch/mips/txx9/jmr3927/prom.c | 1 - arch/mips/txx9/rbtx4927/prom.c | 1 - arch/mips/txx9/rbtx4938/prom.c | 3 --- include/asm-mips/txx9/generic.h | 1 - 6 files changed, 31 insertions(+), 24 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 840fe757c48d..6fb2ef09d5dd 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -97,13 +97,6 @@ config TOSHIBA_RBTX4938_MPLEX_ATA endchoice -config TX4938_NAND_BOOT - depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND - bool "NAND Boot Support (EXPERIMENTAL)" - help - This is only for Toshiba RBTX4938 reference board, which has NAND IPL. - Select this option if you need to use NAND boot. - endif config PCI_TX4927 diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index fe6bee09cece..33d8c9e3223d 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -127,31 +127,51 @@ extern struct txx9_board_vec rbtx4938_vec; struct txx9_board_vec *txx9_board_vec __initdata; static char txx9_system_type[32]; -void __init prom_init_cmdline(void) +static void __init prom_init_cmdline(void) { int argc = (int)fw_arg0; - char **argv = (char **)fw_arg1; + int *argv32 = (int *)fw_arg1; int i; /* Always ignore the "-c" at argv[0] */ -#ifdef CONFIG_64BIT - char *fixed_argv[32]; - for (i = 0; i < argc; i++) - fixed_argv[i] = (char *)(long)(*((__s32 *)argv + i)); - argv = fixed_argv; -#endif + char builtin[CL_SIZE]; /* ignore all built-in args if any f/w args given */ - if (argc > 1) - *arcs_cmdline = '\0'; + /* + * But if built-in strings was started with '+', append them + * to command line args. If built-in was started with '-', + * ignore all f/w args. + */ + builtin[0] = '\0'; + if (arcs_cmdline[0] == '+') + strcpy(builtin, arcs_cmdline + 1); + else if (arcs_cmdline[0] == '-') { + strcpy(builtin, arcs_cmdline + 1); + argc = 0; + } else if (argc <= 1) + strcpy(builtin, arcs_cmdline); + arcs_cmdline[0] = '\0'; for (i = 1; i < argc; i++) { + char *str = (char *)(long)argv32[i]; if (i != 1) strcat(arcs_cmdline, " "); - strcat(arcs_cmdline, argv[i]); + if (strchr(str, ' ')) { + strcat(arcs_cmdline, "\""); + strcat(arcs_cmdline, str); + strcat(arcs_cmdline, "\""); + } else + strcat(arcs_cmdline, str); + } + /* append saved builtin args */ + if (builtin[0]) { + if (arcs_cmdline[0]) + strcat(arcs_cmdline, " "); + strcat(arcs_cmdline, builtin); } } void __init prom_init(void) { + prom_init_cmdline(); #ifdef CONFIG_CPU_TX39XX txx9_board_vec = &jmr3927_vec; #endif diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c index 70c4c8ec3e84..c899c0c087a0 100644 --- a/arch/mips/txx9/jmr3927/prom.c +++ b/arch/mips/txx9/jmr3927/prom.c @@ -47,7 +47,6 @@ void __init jmr3927_prom_init(void) if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) printk(KERN_ERR "TX3927 TLB off\n"); - prom_init_cmdline(); add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); txx9_sio_putchar_init(TX3927_SIO_REG(1)); } diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c index 1dc0a5b1956b..cc97c6a6011b 100644 --- a/arch/mips/txx9/rbtx4927/prom.c +++ b/arch/mips/txx9/rbtx4927/prom.c @@ -36,7 +36,6 @@ void __init rbtx4927_prom_init(void) { - prom_init_cmdline(); add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM); txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL); } diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c index d73123cd2ab9..bcb469247e8c 100644 --- a/arch/mips/txx9/rbtx4938/prom.c +++ b/arch/mips/txx9/rbtx4938/prom.c @@ -18,9 +18,6 @@ void __init rbtx4938_prom_init(void) { -#ifndef CONFIG_TX4938_NAND_BOOT - prom_init_cmdline(); -#endif add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM); txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL); } diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index 5b1ccf901c62..c9eed7ea148c 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -42,7 +42,6 @@ struct txx9_board_vec { }; extern struct txx9_board_vec *txx9_board_vec; extern int (*txx9_irq_dispatch)(int pending); -void prom_init_cmdline(void); char *prom_getcmdline(void); void txx9_wdt_init(unsigned long base); void txx9_spi_init(int busid, unsigned long base, int irq); -- cgit v1.2.3 From 265b89db1058124ddbf0091ba3f8c020e3a5ae9d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:07 +0900 Subject: MIPS: TXx9: Add prom_getenv Add prom_getenv() which can be used for YAMON. This assumes other firmware should pass NULL for fw_arg2. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 15 +++++++++++++++ include/asm-mips/txx9/generic.h | 1 + 2 files changed, 16 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 33d8c9e3223d..005179c2af21 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -212,6 +212,21 @@ char * __init prom_getcmdline(void) return &(arcs_cmdline[0]); } +const char *__init prom_getenv(const char *name) +{ + const s32 *str = (const s32 *)fw_arg2; + + if (!str) + return NULL; + /* YAMON style ("name", "value" pairs) */ + while (str[0] && str[1]) { + if (!strcmp((const char *)(unsigned long)str[0], name)) + return (const char *)(unsigned long)str[1]; + str += 2; + } + return NULL; +} + static void __noreturn txx9_machine_halt(void) { local_irq_disable(); diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index c9eed7ea148c..0a225bf73496 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -43,6 +43,7 @@ struct txx9_board_vec { extern struct txx9_board_vec *txx9_board_vec; extern int (*txx9_irq_dispatch)(int pending); char *prom_getcmdline(void); +const char *prom_getenv(const char *name); void txx9_wdt_init(unsigned long base); void txx9_spi_init(int busid, unsigned long base, int irq); void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr); -- cgit v1.2.3 From 860e546c19d88c21819c7f0861c505debd2d6eed Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:08 +0900 Subject: MIPS: TXx9: Early command-line preprocessing * Select board by command-line option or firmware environment variable. * Handle "masterclk=" option. * Add boards.h to centerize board_vec declaration. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle create mode 100644 include/asm-mips/txx9/boards.h --- arch/mips/txx9/generic/setup.c | 74 ++++++++++++++++++++++++++++++++++++++---- include/asm-mips/txx9/boards.h | 10 ++++++ 2 files changed, 78 insertions(+), 6 deletions(-) create mode 100644 include/asm-mips/txx9/boards.h (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 005179c2af21..dc5dbcc53a91 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -119,14 +119,31 @@ int irq_to_gpio(unsigned irq) EXPORT_SYMBOL(irq_to_gpio); #endif -extern struct txx9_board_vec jmr3927_vec; -extern struct txx9_board_vec rbtx4927_vec; -extern struct txx9_board_vec rbtx4937_vec; -extern struct txx9_board_vec rbtx4938_vec; +#define BOARD_VEC(board) extern struct txx9_board_vec board; +#include +#undef BOARD_VEC struct txx9_board_vec *txx9_board_vec __initdata; static char txx9_system_type[32]; +static struct txx9_board_vec *board_vecs[] __initdata = { +#define BOARD_VEC(board) &board, +#include +#undef BOARD_VEC +}; + +static struct txx9_board_vec *__init find_board_byname(const char *name) +{ + int i; + + /* search board_vecs table */ + for (i = 0; i < ARRAY_SIZE(board_vecs); i++) { + if (strstr(board_vecs[i]->system, name)) + return board_vecs[i]; + } + return NULL; +} + static void __init prom_init_cmdline(void) { int argc = (int)fw_arg0; @@ -169,9 +186,47 @@ static void __init prom_init_cmdline(void) } } -void __init prom_init(void) +static void __init preprocess_cmdline(void) { - prom_init_cmdline(); + char cmdline[CL_SIZE]; + char *s; + + strcpy(cmdline, arcs_cmdline); + s = cmdline; + arcs_cmdline[0] = '\0'; + while (s && *s) { + char *str = strsep(&s, " "); + if (strncmp(str, "board=", 6) == 0) { + txx9_board_vec = find_board_byname(str + 6); + continue; + } else if (strncmp(str, "masterclk=", 10) == 0) { + unsigned long val; + if (strict_strtoul(str + 10, 10, &val) == 0) + txx9_master_clock = val; + continue; + } + if (arcs_cmdline[0]) + strcat(arcs_cmdline, " "); + strcat(arcs_cmdline, str); + } +} + +static void __init select_board(void) +{ + const char *envstr; + + /* first, determine by "board=" argument in preprocess_cmdline() */ + if (txx9_board_vec) + return; + /* next, determine by "board" envvar */ + envstr = prom_getenv("board"); + if (envstr) { + txx9_board_vec = find_board_byname(envstr); + if (txx9_board_vec) + return; + } + + /* select "default" board */ #ifdef CONFIG_CPU_TX39XX txx9_board_vec = &jmr3927_vec; #endif @@ -192,6 +247,13 @@ void __init prom_init(void) #endif } #endif +} + +void __init prom_init(void) +{ + prom_init_cmdline(); + preprocess_cmdline(); + select_board(); strcpy(txx9_system_type, txx9_board_vec->system); diff --git a/include/asm-mips/txx9/boards.h b/include/asm-mips/txx9/boards.h new file mode 100644 index 000000000000..4abc8142fbb7 --- /dev/null +++ b/include/asm-mips/txx9/boards.h @@ -0,0 +1,10 @@ +#ifdef CONFIG_TOSHIBA_JMR3927 +BOARD_VEC(jmr3927_vec) +#endif +#ifdef CONFIG_TOSHIBA_RBTX4927 +BOARD_VEC(rbtx4927_vec) +BOARD_VEC(rbtx4937_vec) +#endif +#ifdef CONFIG_TOSHIBA_RBTX4938 +BOARD_VEC(rbtx4938_vec) +#endif -- cgit v1.2.3 From d10e025f0e4ba4b96d7b5786d232ac5b0b232b11 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:09 +0900 Subject: MIPS: TXx9: Cache fixup TX39/TX49 can enable/disable I/D cache at runtime. Add kernel options to control them. This is useful to debug some cache-related issues, such as aliasing or I/D coherency. Also enable CWF bit for TX49 SoCs. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 113 ++++++++++++++++++++++++++++++++++ arch/mips/txx9/generic/setup_tx3927.c | 18 +++--- arch/mips/txx9/generic/setup_tx4927.c | 1 + arch/mips/txx9/generic/setup_tx4938.c | 1 + arch/mips/txx9/jmr3927/setup.c | 11 +--- arch/mips/txx9/rbtx4927/setup.c | 6 -- 6 files changed, 124 insertions(+), 26 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index dc5dbcc53a91..fa88aefea9ef 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #ifdef CONFIG_CPU_TX49XX @@ -186,6 +187,110 @@ static void __init prom_init_cmdline(void) } } +static int txx9_ic_disable __initdata; +static int txx9_dc_disable __initdata; + +#if defined(CONFIG_CPU_TX49XX) +/* flush all cache on very early stage (before 4k_cache_init) */ +static void __init early_flush_dcache(void) +{ + unsigned int conf = read_c0_config(); + unsigned int dc_size = 1 << (12 + ((conf & CONF_DC) >> 6)); + unsigned int linesz = 32; + unsigned long addr, end; + + end = INDEX_BASE + dc_size / 4; + /* 4way, waybit=0 */ + for (addr = INDEX_BASE; addr < end; addr += linesz) { + cache_op(Index_Writeback_Inv_D, addr | 0); + cache_op(Index_Writeback_Inv_D, addr | 1); + cache_op(Index_Writeback_Inv_D, addr | 2); + cache_op(Index_Writeback_Inv_D, addr | 3); + } +} + +static void __init txx9_cache_fixup(void) +{ + unsigned int conf; + + conf = read_c0_config(); + /* flush and disable */ + if (txx9_ic_disable) { + conf |= TX49_CONF_IC; + write_c0_config(conf); + } + if (txx9_dc_disable) { + early_flush_dcache(); + conf |= TX49_CONF_DC; + write_c0_config(conf); + } + + /* enable cache */ + conf = read_c0_config(); + if (!txx9_ic_disable) + conf &= ~TX49_CONF_IC; + if (!txx9_dc_disable) + conf &= ~TX49_CONF_DC; + write_c0_config(conf); + + if (conf & TX49_CONF_IC) + pr_info("TX49XX I-Cache disabled.\n"); + if (conf & TX49_CONF_DC) + pr_info("TX49XX D-Cache disabled.\n"); +} +#elif defined(CONFIG_CPU_TX39XX) +/* flush all cache on very early stage (before tx39_cache_init) */ +static void __init early_flush_dcache(void) +{ + unsigned int conf = read_c0_config(); + unsigned int dc_size = 1 << (10 + ((conf & TX39_CONF_DCS_MASK) >> + TX39_CONF_DCS_SHIFT)); + unsigned int linesz = 16; + unsigned long addr, end; + + end = INDEX_BASE + dc_size / 2; + /* 2way, waybit=0 */ + for (addr = INDEX_BASE; addr < end; addr += linesz) { + cache_op(Index_Writeback_Inv_D, addr | 0); + cache_op(Index_Writeback_Inv_D, addr | 1); + } +} + +static void __init txx9_cache_fixup(void) +{ + unsigned int conf; + + conf = read_c0_config(); + /* flush and disable */ + if (txx9_ic_disable) { + conf &= ~TX39_CONF_ICE; + write_c0_config(conf); + } + if (txx9_dc_disable) { + early_flush_dcache(); + conf &= ~TX39_CONF_DCE; + write_c0_config(conf); + } + + /* enable cache */ + conf = read_c0_config(); + if (!txx9_ic_disable) + conf |= TX39_CONF_ICE; + if (!txx9_dc_disable) + conf |= TX39_CONF_DCE; + write_c0_config(conf); + + if (!(conf & TX39_CONF_ICE)) + pr_info("TX39XX I-Cache disabled.\n"); + if (!(conf & TX39_CONF_DCE)) + pr_info("TX39XX D-Cache disabled.\n"); +} +#else +static inline void txx9_cache_fixup(void) +{ +} +#endif + static void __init preprocess_cmdline(void) { char cmdline[CL_SIZE]; @@ -204,11 +309,19 @@ static void __init preprocess_cmdline(void) if (strict_strtoul(str + 10, 10, &val) == 0) txx9_master_clock = val; continue; + } else if (strcmp(str, "icdisable") == 0) { + txx9_ic_disable = 1; + continue; + } else if (strcmp(str, "dcdisable") == 0) { + txx9_dc_disable = 1; + continue; } if (arcs_cmdline[0]) strcat(arcs_cmdline, " "); strcat(arcs_cmdline, str); } + + txx9_cache_fixup(); } static void __init select_board(void) diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c index 7bd963d37fc3..4bc2f859379d 100644 --- a/arch/mips/txx9/generic/setup_tx3927.c +++ b/arch/mips/txx9/generic/setup_tx3927.c @@ -99,16 +99,14 @@ void __init tx3927_setup(void) txx9_gpio_init(TX3927_PIO_REG, 0, 16); conf = read_c0_conf(); - if (!(conf & TX39_CONF_ICE)) - printk(KERN_INFO "TX3927 I-Cache disabled.\n"); - if (!(conf & TX39_CONF_DCE)) - printk(KERN_INFO "TX3927 D-Cache disabled.\n"); - else if (!(conf & TX39_CONF_WBON)) - printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n"); - else if (!(conf & TX39_CONF_CWFON)) - printk(KERN_INFO "TX3927 D-Cache WriteBack.\n"); - else - printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n"); + if (conf & TX39_CONF_DCE) { + if (!(conf & TX39_CONF_WBON)) + pr_info("TX3927 D-Cache WriteThrough.\n"); + else if (!(conf & TX39_CONF_CWFON)) + pr_info("TX3927 D-Cache WriteBack.\n"); + else + pr_info("TX3927 D-Cache WriteBack (CWF) .\n"); + } } void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr) diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index f80d4b7a694d..e679c79a4b0f 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -44,6 +44,7 @@ void __init tx4927_setup(void) txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE, TX4927_REG_SIZE); + set_c0_config(TX49_CONF_CWFON); /* SDRAMC,EBUSC are configured by PROM */ for (i = 0; i < 8; i++) { diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index f3040b9ba059..95c058f0a96c 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -47,6 +47,7 @@ void __init tx4938_setup(void) txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE, TX4938_REG_SIZE); + set_c0_config(TX49_CONF_CWFON); /* SDRAMC,EBUSC are configured by PROM */ for (i = 0; i < 8; i++) { diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 87db41be8a56..2e40a9268254 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -62,7 +62,6 @@ static void __init jmr3927_time_init(void) } #define DO_WRITE_THROUGH -#define DO_ENABLE_CACHE static void jmr3927_board_init(void); @@ -77,11 +76,6 @@ static void __init jmr3927_mem_setup(void) /* cache setup */ { unsigned int conf; -#ifdef DO_ENABLE_CACHE - int mips_ic_disable = 0, mips_dc_disable = 0; -#else - int mips_ic_disable = 1, mips_dc_disable = 1; -#endif #ifdef DO_WRITE_THROUGH int mips_config_cwfon = 0; int mips_config_wbon = 0; @@ -91,10 +85,7 @@ static void __init jmr3927_mem_setup(void) #endif conf = read_c0_conf(); - conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | - TX39_CONF_WBON | TX39_CONF_CWFON); - conf |= mips_ic_disable ? 0 : TX39_CONF_ICE; - conf |= mips_dc_disable ? 0 : TX39_CONF_DCE; + conf &= ~(TX39_CONF_WBON | TX39_CONF_CWFON); conf |= mips_config_wbon ? TX39_CONF_WBON : 0; conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0; diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 5985f330838a..0464a39b39ac 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -186,14 +186,8 @@ static void __init rbtx4937_clock_init(void); static void __init rbtx4927_mem_setup(void) { - u32 cp0_config; char *argptr; - /* enable caches -- HCP5 does this, pmon does not */ - cp0_config = read_c0_config(); - cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); - write_c0_config(cp0_config); - if (TX4927_REV_PCODE() == 0x4927) { rbtx4927_clock_init(); tx4927_setup(); -- cgit v1.2.3 From c7b95bcb38ea492fd025008ef99501a2b90aa237 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:10 +0900 Subject: MIPS: TXx9: Runtime configuration of timeout-error Add kernel options to control bus timeout error. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 11 +++++++++++ arch/mips/txx9/generic/setup_tx3927.c | 5 ----- 2 files changed, 11 insertions(+), 5 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index fa88aefea9ef..fa45f174b0ee 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -68,7 +68,12 @@ unsigned int txx9_master_clock; unsigned int txx9_cpu_clock; unsigned int txx9_gbus_clock; +#ifdef CONFIG_CPU_TX39XX +/* don't enable by default - see errata */ +int txx9_ccfg_toeon __initdata; +#else int txx9_ccfg_toeon __initdata = 1; +#endif /* Minimum CLK support */ @@ -315,6 +320,12 @@ static void __init preprocess_cmdline(void) } else if (strcmp(str, "dcdisable") == 0) { txx9_dc_disable = 1; continue; + } else if (strcmp(str, "toeoff") == 0) { + txx9_ccfg_toeon = 0; + continue; + } else if (strcmp(str, "toeon") == 0) { + txx9_ccfg_toeon = 1; + continue; } if (arcs_cmdline[0]) strcat(arcs_cmdline, " "); diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c index 4bc2f859379d..06c492576078 100644 --- a/arch/mips/txx9/generic/setup_tx3927.c +++ b/arch/mips/txx9/generic/setup_tx3927.c @@ -32,11 +32,6 @@ void __init tx3927_setup(void) int i; unsigned int conf; - /* don't enable - see errata */ - txx9_ccfg_toeon = 0; - if (strstr(prom_getcmdline(), "toeon") != NULL) - txx9_ccfg_toeon = 1; - txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE, TX3927_REG_SIZE); -- cgit v1.2.3 From 51f607c76e1e7bd089dcad97b6b0a58649be06a3 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:11 +0900 Subject: MIPS: TXx9: Add mtd support Add helper routines to register physmap-flash platform devices for NOR flashes. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 41 +++++++++++++++++++++++++++++++++++ arch/mips/txx9/generic/setup_tx3927.c | 14 ++++++++++++ arch/mips/txx9/generic/setup_tx4927.c | 14 ++++++++++++ arch/mips/txx9/generic/setup_tx4938.c | 14 ++++++++++++ arch/mips/txx9/jmr3927/setup.c | 9 ++++++++ arch/mips/txx9/rbtx4927/setup.c | 9 ++++++++ arch/mips/txx9/rbtx4938/setup.c | 38 ++++++++++++++++++++++++++++++++ include/asm-mips/txx9/generic.h | 4 ++++ include/asm-mips/txx9/tx3927.h | 2 ++ include/asm-mips/txx9/tx4927.h | 3 +++ include/asm-mips/txx9/tx4938.h | 2 ++ 11 files changed, 150 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index fa45f174b0ee..cfa3ccf493bb 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -593,3 +594,43 @@ static unsigned long __swizzle_addr_none(unsigned long port) unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none; EXPORT_SYMBOL(__swizzle_addr_b); #endif + +void __init txx9_physmap_flash_init(int no, unsigned long addr, + unsigned long size, + const struct physmap_flash_data *pdata) +{ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) + struct resource res = { + .start = addr, + .end = addr + size - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *pdev; +#ifdef CONFIG_MTD_PARTITIONS + static struct mtd_partition parts[2]; + struct physmap_flash_data pdata_part; + + /* If this area contained boot area, make separate partition */ + if (pdata->nr_parts == 0 && !pdata->parts && + addr < 0x1fc00000 && addr + size > 0x1fc00000 && + !parts[0].name) { + parts[0].name = "boot"; + parts[0].offset = 0x1fc00000 - addr; + parts[0].size = addr + size - 0x1fc00000; + parts[1].name = "user"; + parts[1].offset = 0; + parts[1].size = 0x1fc00000 - addr; + pdata_part = *pdata; + pdata_part.nr_parts = ARRAY_SIZE(parts); + pdata_part.parts = parts; + pdata = &pdata_part; + } +#endif + pdev = platform_device_alloc("physmap-flash", no); + if (!pdev || + platform_device_add_resources(pdev, &res, 1) || + platform_device_add_data(pdev, pdata, sizeof(*pdata)) || + platform_device_add(pdev)) + platform_device_put(pdev); +#endif +} diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c index 06c492576078..9505d58454c8 100644 --- a/arch/mips/txx9/generic/setup_tx3927.c +++ b/arch/mips/txx9/generic/setup_tx3927.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -121,3 +122,16 @@ void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask) TXX9_IRQ_BASE + TX3927_IR_SIO(i), i, sclk, (1 << i) & cts_mask); } + +void __init tx3927_mtd_init(int ch) +{ + struct physmap_flash_data pdata = { + .width = TX3927_ROMC_WIDTH(ch) / 8, + }; + unsigned long start = txx9_ce_res[ch].start; + unsigned long size = txx9_ce_res[ch].end - start + 1; + + if (!(tx3927_romcptr->cr[ch] & 0x8)) + return; /* disabled */ + txx9_physmap_flash_init(ch, start, size, &pdata); +} diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index e679c79a4b0f..0840ef930e40 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -187,3 +188,16 @@ void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask) TXX9_IRQ_BASE + TX4927_IR_SIO(i), i, sclk, (1 << i) & cts_mask); } + +void __init tx4927_mtd_init(int ch) +{ + struct physmap_flash_data pdata = { + .width = TX4927_EBUSC_WIDTH(ch) / 8, + }; + unsigned long start = txx9_ce_res[ch].start; + unsigned long size = txx9_ce_res[ch].end - start + 1; + + if (!(TX4927_EBUSC_CR(ch) & 0x8)) + return; /* disabled */ + txx9_physmap_flash_init(ch, start, size, &pdata); +} diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index 95c058f0a96c..630a7aac61f6 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -269,3 +270,16 @@ void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1) if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL)) txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1); } + +void __init tx4938_mtd_init(int ch) +{ + struct physmap_flash_data pdata = { + .width = TX4938_EBUSC_WIDTH(ch) / 8, + }; + unsigned long start = txx9_ce_res[ch].start; + unsigned long size = txx9_ce_res[ch].end - start + 1; + + if (!(TX4938_EBUSC_CR(ch) & 0x8)) + return; /* disabled */ + txx9_physmap_flash_init(ch, start, size, &pdata); +} diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 2e40a9268254..0f3843c92cf7 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -190,11 +190,20 @@ static void __init jmr3927_rtc_init(void) platform_device_register_simple("rtc-ds1742", -1, &res, 1); } +static void __init jmr3927_mtd_init(void) +{ + int i; + + for (i = 0; i < 2; i++) + tx3927_mtd_init(i); +} + static void __init jmr3927_device_init(void) { __swizzle_addr_b = jmr3927_swizzle_addr_b; jmr3927_rtc_init(); tx3927_wdt_init(); + jmr3927_mtd_init(); } struct txx9_board_vec jmr3927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 0464a39b39ac..abe32c1a79dc 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -307,11 +307,20 @@ static void __init rbtx4927_ne_init(void) platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res)); } +static void __init rbtx4927_mtd_init(void) +{ + int i; + + for (i = 0; i < 2; i++) + tx4927_mtd_init(i); +} + static void __init rbtx4927_device_init(void) { toshiba_rbtx4927_rtc_init(); rbtx4927_ne_init(); tx4927_wdt_init(); + rbtx4927_mtd_init(); } struct txx9_board_vec rbtx4927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 9ab48dec0fe8..e7bc5b8c7db8 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -294,6 +295,42 @@ static int __init rbtx4938_spi_init(void) return 0; } +static void __init rbtx4938_mtd_init(void) +{ + struct physmap_flash_data pdata = { + .width = 4, + }; + + switch (readb(rbtx4938_bdipsw_addr) & 7) { + case 0: + /* Boot */ + txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata); + /* System */ + txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata); + break; + case 1: + /* System */ + txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata); + /* Boot */ + txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata); + break; + case 2: + /* Ext */ + txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata); + /* System */ + txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata); + /* Boot */ + txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata); + break; + case 3: + /* Boot */ + txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata); + /* System */ + txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata); + break; + } +} + static void __init rbtx4938_arch_init(void) { gpiochip_add(&rbtx4938_spi_gpio_chip); @@ -306,6 +343,7 @@ static void __init rbtx4938_device_init(void) rbtx4938_ethaddr_init(); rbtx4938_ne_init(); tx4938_wdt_init(); + rbtx4938_mtd_init(); } struct txx9_board_vec rbtx4938_vec __initdata = { diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index 0a225bf73496..1982c4437b1d 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -59,4 +59,8 @@ static inline void txx9_sio_putchar_init(unsigned long baseaddr) } #endif +struct physmap_flash_data; +void txx9_physmap_flash_init(int no, unsigned long addr, unsigned long size, + const struct physmap_flash_data *pdata); + #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h index 587deb9592d2..dc30c8d42061 100644 --- a/include/asm-mips/txx9/tx3927.h +++ b/include/asm-mips/txx9/tx3927.h @@ -325,6 +325,7 @@ struct tx3927_ccfg_reg { #define TX3927_ROMC_BA(ch) (tx3927_romcptr->cr[(ch)] & 0xfff00000) #define TX3927_ROMC_SIZE(ch) \ (0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf)) +#define TX3927_ROMC_WIDTH(ch) (32 >> ((tx3927_romcptr->cr[(ch)] >> 7) & 0x1)) void tx3927_wdt_init(void); void tx3927_setup(void); @@ -335,5 +336,6 @@ void tx3927_pcic_setup(struct pci_controller *channel, unsigned long sdram_size, int extarb); void tx3927_setup_pcierr_irq(void); void tx3927_irq_init(void); +void tx3927_mtd_init(int ch); #endif /* __ASM_TXX9_TX3927_H */ diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h index 195f6515db9a..36a9241b0cac 100644 --- a/include/asm-mips/txx9/tx4927.h +++ b/include/asm-mips/txx9/tx4927.h @@ -196,6 +196,8 @@ struct tx4927_ccfg_reg { #define TX4927_EBUSC_BA(ch) ((TX4927_EBUSC_CR(ch) >> 48) << 20) #define TX4927_EBUSC_SIZE(ch) \ (0x00100000 << ((unsigned long)(TX4927_EBUSC_CR(ch) >> 8) & 0xf)) +#define TX4927_EBUSC_WIDTH(ch) \ + (64 >> ((__u32)(TX4927_EBUSC_CR(ch) >> 20) & 0x3)) /* utilities */ static inline void txx9_clear64(__u64 __iomem *adr, __u64 bits) @@ -251,5 +253,6 @@ int tx4927_report_pciclk(void); int tx4927_pciclk66_setup(void); void tx4927_setup_pcierr_irq(void); void tx4927_irq_init(void); +void tx4927_mtd_init(int ch); #endif /* __ASM_TXX9_TX4927_H */ diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h index 8175d4ccbc39..989e7751135a 100644 --- a/include/asm-mips/txx9/tx4938.h +++ b/include/asm-mips/txx9/tx4938.h @@ -274,6 +274,7 @@ struct tx4938_ccfg_reg { #define TX4938_EBUSC_CR(ch) TX4927_EBUSC_CR(ch) #define TX4938_EBUSC_BA(ch) TX4927_EBUSC_BA(ch) #define TX4938_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch) +#define TX4938_EBUSC_WIDTH(ch) TX4927_EBUSC_WIDTH(ch) #define tx4938_get_mem_size() tx4927_get_mem_size() void tx4938_wdt_init(void); @@ -289,5 +290,6 @@ struct pci_dev; int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot); void tx4938_setup_pcierr_irq(void); void tx4938_irq_init(void); +void tx4938_mtd_init(int ch); #endif -- cgit v1.2.3 From 74894363499942a76f2c20e41e8bfebc9fdc267a Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:12 +0900 Subject: MIPS: TXx9: Raise priority of interrupts for errors, timers, SIO Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/irq_tx4927.c | 11 +++++++++++ arch/mips/txx9/generic/irq_tx4938.c | 11 +++++++++++ include/asm-mips/txx9/tx4927.h | 11 +++++++++++ 3 files changed, 33 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c index cbea1fdde82b..ad2870def8f1 100644 --- a/arch/mips/txx9/generic/irq_tx4927.c +++ b/arch/mips/txx9/generic/irq_tx4927.c @@ -30,8 +30,19 @@ void __init tx4927_irq_init(void) { + int i; + mips_cpu_irq_init(); txx9_irq_init(TX4927_IRC_REG & 0xfffffffffULL); set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4927_IRC_INT, handle_simple_irq); + /* raise priority for errors, timers, SIO */ + txx9_irq_set_pri(TX4927_IR_ECCERR, 7); + txx9_irq_set_pri(TX4927_IR_WTOERR, 7); + txx9_irq_set_pri(TX4927_IR_PCIERR, 7); + txx9_irq_set_pri(TX4927_IR_PCIPME, 7); + for (i = 0; i < TX4927_NUM_IR_TMR; i++) + txx9_irq_set_pri(TX4927_IR_TMR(i), 6); + for (i = 0; i < TX4927_NUM_IR_SIO; i++) + txx9_irq_set_pri(TX4927_IR_SIO(i), 5); } diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c index 6eac684bf190..025ae11359a8 100644 --- a/arch/mips/txx9/generic/irq_tx4938.c +++ b/arch/mips/txx9/generic/irq_tx4938.c @@ -18,8 +18,19 @@ void __init tx4938_irq_init(void) { + int i; + mips_cpu_irq_init(); txx9_irq_init(TX4938_IRC_REG & 0xfffffffffULL); set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4938_IRC_INT, handle_simple_irq); + /* raise priority for errors, timers, SIO */ + txx9_irq_set_pri(TX4938_IR_ECCERR, 7); + txx9_irq_set_pri(TX4938_IR_WTOERR, 7); + txx9_irq_set_pri(TX4938_IR_PCIERR, 7); + txx9_irq_set_pri(TX4938_IR_PCIPME, 7); + for (i = 0; i < TX4938_NUM_IR_TMR; i++) + txx9_irq_set_pri(TX4938_IR_TMR(i), 6); + for (i = 0; i < TX4938_NUM_IR_SIO; i++) + txx9_irq_set_pri(TX4938_IR_SIO(i), 5); } diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h index 36a9241b0cac..7d813f1cb98d 100644 --- a/include/asm-mips/txx9/tx4927.h +++ b/include/asm-mips/txx9/tx4927.h @@ -50,12 +50,23 @@ #define TX4927_SIO_REG(ch) (TX4927_REG_BASE + 0xf300 + (ch) * 0x100) #define TX4927_PIO_REG (TX4927_REG_BASE + 0xf500) +#define TX4927_IR_ECCERR 0 +#define TX4927_IR_WTOERR 1 +#define TX4927_NUM_IR_INT 6 #define TX4927_IR_INT(n) (2 + (n)) +#define TX4927_NUM_IR_SIO 2 #define TX4927_IR_SIO(n) (8 + (n)) +#define TX4927_NUM_IR_DMA 4 +#define TX4927_IR_DMA(n) (10 + (n)) +#define TX4927_IR_PIO 14 +#define TX4927_IR_PDMAC 15 #define TX4927_IR_PCIC 16 #define TX4927_NUM_IR_TMR 3 #define TX4927_IR_TMR(n) (17 + (n)) #define TX4927_IR_PCIERR 22 +#define TX4927_IR_PCIPME 23 +#define TX4927_IR_ACLC 24 +#define TX4927_IR_ACLCPME 25 #define TX4927_NUM_IR 32 #define TX4927_IRC_INT 2 /* IP[2] in Status register */ -- cgit v1.2.3 From e6332374770ae5aa370af5792115261edbad05c1 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:13 +0900 Subject: MIPS: RBTX4938: Add TOSHIBA_RBTX4938_MPLEX_KEEP Add TOSHIBA_RBTX4938_MPLEX_KEEP to keep MPLEX settings by firmware. Also replace some printk with pr_info. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/Kconfig | 2 ++ arch/mips/txx9/rbtx4938/setup.c | 13 ++++++++++--- 2 files changed, 12 insertions(+), 3 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 6fb2ef09d5dd..aade3348af29 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -94,6 +94,8 @@ config TOSHIBA_RBTX4938_MPLEX_NAND bool "NAND" config TOSHIBA_RBTX4938_MPLEX_ATA bool "ATA" +config TOSHIBA_RBTX4938_MPLEX_KEEP + bool "Keep firmware settings" endchoice diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index e7bc5b8c7db8..7aba92a12399 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -174,23 +174,30 @@ static void __init rbtx4938_mem_setup(void) #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 - printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n"); + pr_info("PIOSEL: disabling both ATA and NAND selection\n"); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND - printk(KERN_INFO "PIOSEL: enabling nand selection\n"); + pr_info("PIOSEL: enabling NAND selection\n"); txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA - printk(KERN_INFO "PIOSEL: enabling ata selection\n"); + pr_info("PIOSEL: enabling ATA selection\n"); txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); #endif +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP + pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); + pr_info("PIOSEL: NAND %s, ATA %s\n", + (pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled", + (pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled"); +#endif + rbtx4938_spi_setup(); pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */ /* fixup piosel */ -- cgit v1.2.3 From d75a40e90e9eb08c2159e719a90a7922dab231d3 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:14 +0900 Subject: MIPS: TXx9: Make spi_eeprom.c more generic Helper routines in txx9/rbtx4938/spi_eeprom.c is not TX4938 specific. Move it to txx9/generic/ directory and make it works with SPI bus number other than 0. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle create mode 100644 arch/mips/txx9/generic/spi_eeprom.c delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c --- arch/mips/txx9/generic/Makefile | 1 + arch/mips/txx9/generic/spi_eeprom.c | 103 +++++++++++++++++++++++++++++++++++ arch/mips/txx9/rbtx4938/Makefile | 2 +- arch/mips/txx9/rbtx4938/setup.c | 11 ++-- arch/mips/txx9/rbtx4938/spi_eeprom.c | 99 --------------------------------- include/asm-mips/txx9/spi.h | 19 ++++++- 6 files changed, 128 insertions(+), 107 deletions(-) create mode 100644 arch/mips/txx9/generic/spi_eeprom.c delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 9bb34af26b73..986852cc774c 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -8,5 +8,6 @@ obj-$(CONFIG_SOC_TX3927) += setup_tx3927.o irq_tx3927.o obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o setup_tx4927.o irq_tx4927.o obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o +obj-$(CONFIG_SPI) += spi_eeprom.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/generic/spi_eeprom.c b/arch/mips/txx9/generic/spi_eeprom.c new file mode 100644 index 000000000000..75c347238f47 --- /dev/null +++ b/arch/mips/txx9/generic/spi_eeprom.c @@ -0,0 +1,103 @@ +/* + * spi_eeprom.c + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include +#include +#include +#include +#include + +#define AT250X0_PAGE_SIZE 8 + +/* register board information for at25 driver */ +int __init spi_eeprom_register(int busid, int chipid, int size) +{ + struct spi_board_info info = { + .modalias = "at25", + .max_speed_hz = 1500000, /* 1.5Mbps */ + .bus_num = busid, + .chip_select = chipid, + /* Mode 0: High-Active, Sample-Then-Shift */ + }; + struct spi_eeprom *eeprom; + eeprom = kzalloc(sizeof(*eeprom), GFP_KERNEL); + if (!eeprom) + return -ENOMEM; + strcpy(eeprom->name, "at250x0"); + eeprom->byte_len = size; + eeprom->page_size = AT250X0_PAGE_SIZE; + eeprom->flags = EE_ADDR1; + info.platform_data = eeprom; + return spi_register_board_info(&info, 1); +} + +/* simple temporary spi driver to provide early access to seeprom. */ + +static struct read_param { + int busid; + int chipid; + int address; + unsigned char *buf; + int len; +} *read_param; + +static int __init early_seeprom_probe(struct spi_device *spi) +{ + int stat = 0; + u8 cmd[2]; + int len = read_param->len; + char *buf = read_param->buf; + int address = read_param->address; + + dev_info(&spi->dev, "spiclk %u KHz.\n", + (spi->max_speed_hz + 500) / 1000); + if (read_param->busid != spi->master->bus_num || + read_param->chipid != spi->chip_select) + return -ENODEV; + while (len > 0) { + /* spi_write_then_read can only work with small chunk */ + int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE; + cmd[0] = 0x03; /* AT25_READ */ + cmd[1] = address; + stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c); + buf += c; + len -= c; + address += c; + } + return stat; +} + +static struct spi_driver early_seeprom_driver __initdata = { + .driver = { + .name = "at25", + .owner = THIS_MODULE, + }, + .probe = early_seeprom_probe, +}; + +int __init spi_eeprom_read(int busid, int chipid, int address, + unsigned char *buf, int len) +{ + int ret; + struct read_param param = { + .busid = busid, + .chipid = chipid, + .address = address, + .buf = buf, + .len = len + }; + + read_param = ¶m; + ret = spi_register_driver(&early_seeprom_driver); + if (!ret) + spi_unregister_driver(&early_seeprom_driver); + return ret; +} diff --git a/arch/mips/txx9/rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile index 9dcc52ae5b9d..f3e1f597b4f1 100644 --- a/arch/mips/txx9/rbtx4938/Makefile +++ b/arch/mips/txx9/rbtx4938/Makefile @@ -1,3 +1,3 @@ -obj-y += prom.o setup.o irq.o spi_eeprom.o +obj-y += prom.o setup.o irq.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 7aba92a12399..ec6e81258f73 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -111,6 +111,7 @@ static void __init rbtx4938_pci_setup(void) #define SEEPROM2_CS 0 /* IOC */ #define SEEPROM3_CS 1 /* IOC */ #define SRTC_CS 2 /* IOC */ +#define SPI_BUSNO 0 static int __init rbtx4938_ethaddr_init(void) { @@ -120,7 +121,7 @@ static int __init rbtx4938_ethaddr_init(void) int i; /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ - if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) { + if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) { printk(KERN_ERR "seeprom: read error.\n"); return -ENODEV; } else { @@ -287,9 +288,9 @@ static int __init rbtx4938_spi_init(void) .mode = SPI_MODE_1 | SPI_CS_HIGH, }; spi_register_board_info(&srtc_info, 1); - spi_eeprom_register(SEEPROM1_CS); - spi_eeprom_register(16 + SEEPROM2_CS); - spi_eeprom_register(16 + SEEPROM3_CS); + spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128); + spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128); + spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128); gpio_request(16 + SRTC_CS, "rtc-rs5c348"); gpio_direction_output(16 + SRTC_CS, 0); gpio_request(SEEPROM1_CS, "seeprom1"); @@ -298,7 +299,7 @@ static int __init rbtx4938_spi_init(void) gpio_direction_output(16 + SEEPROM2_CS, 1); gpio_request(16 + SEEPROM3_CS, "seeprom3"); gpio_direction_output(16 + SEEPROM3_CS, 1); - tx4938_spi_init(0); + tx4938_spi_init(SPI_BUSNO); return 0; } diff --git a/arch/mips/txx9/rbtx4938/spi_eeprom.c b/arch/mips/txx9/rbtx4938/spi_eeprom.c deleted file mode 100644 index a7ea8b041c1d..000000000000 --- a/arch/mips/txx9/rbtx4938/spi_eeprom.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * spi_eeprom.c - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include -#include - -#define AT250X0_PAGE_SIZE 8 - -/* register board information for at25 driver */ -int __init spi_eeprom_register(int chipid) -{ - static struct spi_eeprom eeprom = { - .name = "at250x0", - .byte_len = 128, - .page_size = AT250X0_PAGE_SIZE, - .flags = EE_ADDR1, - }; - struct spi_board_info info = { - .modalias = "at25", - .max_speed_hz = 1500000, /* 1.5Mbps */ - .bus_num = 0, - .chip_select = chipid, - .platform_data = &eeprom, - /* Mode 0: High-Active, Sample-Then-Shift */ - }; - - return spi_register_board_info(&info, 1); -} - -/* simple temporary spi driver to provide early access to seeprom. */ - -static struct read_param { - int chipid; - int address; - unsigned char *buf; - int len; -} *read_param; - -static int __init early_seeprom_probe(struct spi_device *spi) -{ - int stat = 0; - u8 cmd[2]; - int len = read_param->len; - char *buf = read_param->buf; - int address = read_param->address; - - dev_info(&spi->dev, "spiclk %u KHz.\n", - (spi->max_speed_hz + 500) / 1000); - if (read_param->chipid != spi->chip_select) - return -ENODEV; - while (len > 0) { - /* spi_write_then_read can only work with small chunk */ - int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE; - cmd[0] = 0x03; /* AT25_READ */ - cmd[1] = address; - stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c); - buf += c; - len -= c; - address += c; - } - return stat; -} - -static struct spi_driver early_seeprom_driver __initdata = { - .driver = { - .name = "at25", - .owner = THIS_MODULE, - }, - .probe = early_seeprom_probe, -}; - -int __init spi_eeprom_read(int chipid, int address, - unsigned char *buf, int len) -{ - int ret; - struct read_param param = { - .chipid = chipid, - .address = address, - .buf = buf, - .len = len - }; - - read_param = ¶m; - ret = spi_register_driver(&early_seeprom_driver); - if (!ret) - spi_unregister_driver(&early_seeprom_driver); - return ret; -} diff --git a/include/asm-mips/txx9/spi.h b/include/asm-mips/txx9/spi.h index ddfb2a0dc432..0d727f354557 100644 --- a/include/asm-mips/txx9/spi.h +++ b/include/asm-mips/txx9/spi.h @@ -13,7 +13,22 @@ #ifndef __ASM_TXX9_SPI_H #define __ASM_TXX9_SPI_H -extern int spi_eeprom_register(int chipid); -extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len); +#include + +#ifdef CONFIG_SPI +int spi_eeprom_register(int busid, int chipid, int size); +int spi_eeprom_read(int busid, int chipid, + int address, unsigned char *buf, int len); +#else +static inline int spi_eeprom_register(int busid, int chipid, int size) +{ + return -ENODEV; +} +static inline int spi_eeprom_read(int busid, int chipid, + int address, unsigned char *buf, int len) +{ + return -ENODEV; +} +#endif #endif /* __ASM_TXX9_SPI_H */ -- cgit v1.2.3 From 496a3b5c2c188e8af07261792b3d4e6cf1c1dab9 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:15 +0900 Subject: MIPS: TXx9: Default machine_restart using watchdog reset Add default machine_restart routine using watchdog reset of TX4927 and TX4938. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 15 +++++++++++++++ arch/mips/txx9/generic/setup_tx4927.c | 28 ++++++++++++++++++++++++++++ arch/mips/txx9/generic/setup_tx4938.c | 28 ++++++++++++++++++++++++++++ include/asm-mips/txx9/generic.h | 1 + 4 files changed, 72 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index cfa3ccf493bb..118d716f7832 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -29,6 +29,7 @@ #include #include #include +#include #ifdef CONFIG_CPU_TX49XX #include #endif @@ -444,6 +445,20 @@ void __init txx9_wdt_init(unsigned long base) platform_device_register_simple("txx9wdt", -1, &res, 1); } +void txx9_wdt_now(unsigned long base) +{ + struct txx9_tmr_reg __iomem *tmrptr = + ioremap(base, sizeof(struct txx9_tmr_reg)); + /* disable watch dog timer */ + __raw_writel(TXx9_TMWTMR_WDIS | TXx9_TMWTMR_TWC, &tmrptr->wtmr); + __raw_writel(0, &tmrptr->tcr); + /* kick watchdog */ + __raw_writel(TXx9_TMWTMR_TWIE, &tmrptr->wtmr); + __raw_writel(1, &tmrptr->cpra); /* immediate */ + __raw_writel(TXx9_TMTCR_TCE | TXx9_TMTCR_CCDE | TXx9_TMTCR_TMODE_WDOG, + &tmrptr->tcr); +} + /* SPI support */ void __init txx9_spi_init(int busid, unsigned long base, int irq) { diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index 0840ef930e40..7189675f6a29 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -23,6 +24,10 @@ static void __init tx4927_wdr_init(void) { + /* report watchdog reset status */ + if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDRST) + pr_warning("Watchdog reset detected at 0x%lx\n", + read_c0_errorepc()); /* clear WatchDogReset (W1C) */ tx4927_ccfg_set(TX4927_CCFG_WDRST); /* do reset on watchdog */ @@ -34,6 +39,27 @@ void __init tx4927_wdt_init(void) txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); } +static void tx4927_machine_restart(char *command) +{ + local_irq_disable(); + pr_emerg("Rebooting (with %s watchdog reset)...\n", + (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDREXEN) ? + "external" : "internal"); + /* clear watchdog status */ + tx4927_ccfg_set(TX4927_CCFG_WDRST); /* W1C */ + txx9_wdt_now(TX4927_TMR_REG(2) & 0xfffffffffULL); + while (!(____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDRST)) + ; + mdelay(10); + if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDREXEN) { + pr_emerg("Rebooting (with internal watchdog reset)...\n"); + /* External WDRST failed. Do internal watchdog reset */ + tx4927_ccfg_clear(TX4927_CCFG_WDREXEN); + } + /* fallback */ + (*_machine_halt)(); +} + static struct resource tx4927_sdram_resource[4]; void __init tx4927_setup(void) @@ -169,6 +195,8 @@ void __init tx4927_setup(void) txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO); __raw_writel(0, &tx4927_pioptr->maskcpu); __raw_writel(0, &tx4927_pioptr->maskext); + + _machine_restart = tx4927_machine_restart; } void __init tx4927_time_init(unsigned int tmrnr) diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index 630a7aac61f6..4fbc85a8597f 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -23,6 +24,10 @@ static void __init tx4938_wdr_init(void) { + /* report watchdog reset status */ + if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDRST) + pr_warning("Watchdog reset detected at 0x%lx\n", + read_c0_errorepc()); /* clear WatchDogReset (W1C) */ tx4938_ccfg_set(TX4938_CCFG_WDRST); /* do reset on watchdog */ @@ -34,6 +39,27 @@ void __init tx4938_wdt_init(void) txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); } +static void tx4938_machine_restart(char *command) +{ + local_irq_disable(); + pr_emerg("Rebooting (with %s watchdog reset)...\n", + (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDREXEN) ? + "external" : "internal"); + /* clear watchdog status */ + tx4938_ccfg_set(TX4938_CCFG_WDRST); /* W1C */ + txx9_wdt_now(TX4938_TMR_REG(2) & 0xfffffffffULL); + while (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDRST)) + ; + mdelay(10); + if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDREXEN) { + pr_emerg("Rebooting (with internal watchdog reset)...\n"); + /* External WDRST failed. Do internal watchdog reset */ + tx4938_ccfg_clear(TX4938_CCFG_WDREXEN); + } + /* fallback */ + (*_machine_halt)(); +} + static struct resource tx4938_sdram_resource[4]; static struct resource tx4938_sram_resource; @@ -229,6 +255,8 @@ void __init tx4938_setup(void) TX4938_CLKCTR_ETH1CKD); } } + + _machine_restart = tx4938_machine_restart; } void __init tx4938_time_init(unsigned int tmrnr) diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index 1982c4437b1d..1e1a9f2d2379 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -45,6 +45,7 @@ extern int (*txx9_irq_dispatch)(int pending); char *prom_getcmdline(void); const char *prom_getenv(const char *name); void txx9_wdt_init(unsigned long base); +void txx9_wdt_now(unsigned long base); void txx9_spi_init(int busid, unsigned long base, int irq); void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr); void txx9_sio_init(unsigned long baseaddr, int irq, -- cgit v1.2.3 From ce8e74112b1b1215aa5bbe261ed751498ce65434 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:16 +0900 Subject: MIPS: TXx9: Add board_be_init for TX4927/TX4938 Setup default board_be_handler for TX4927/TX4938. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup_tx4927.c | 23 +++++++++++++++++++++++ arch/mips/txx9/generic/setup_tx4938.c | 23 +++++++++++++++++++++++ 2 files changed, 46 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index 7189675f6a29..c4248cbbd84a 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -14,8 +14,10 @@ #include #include #include +#include #include #include +#include #include #include #include @@ -60,6 +62,26 @@ static void tx4927_machine_restart(char *command) (*_machine_halt)(); } +void show_registers(struct pt_regs *regs); +static int tx4927_be_handler(struct pt_regs *regs, int is_fixup) +{ + int data = regs->cp0_cause & 4; + console_verbose(); + pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc); + pr_err("ccfg:%llx, toea:%llx\n", + (unsigned long long)____raw_readq(&tx4927_ccfgptr->ccfg), + (unsigned long long)____raw_readq(&tx4927_ccfgptr->toea)); +#ifdef CONFIG_PCI + tx4927_report_pcic_status(); +#endif + show_registers(regs); + panic("BusError!"); +} +static void __init tx4927_be_init(void) +{ + board_be_handler = tx4927_be_handler; +} + static struct resource tx4927_sdram_resource[4]; void __init tx4927_setup(void) @@ -197,6 +219,7 @@ void __init tx4927_setup(void) __raw_writel(0, &tx4927_pioptr->maskext); _machine_restart = tx4927_machine_restart; + board_be_init = tx4927_be_init; } void __init tx4927_time_init(unsigned int tmrnr) diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index 4fbc85a8597f..0d8517ad3ad0 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -14,8 +14,10 @@ #include #include #include +#include #include #include +#include #include #include #include @@ -60,6 +62,26 @@ static void tx4938_machine_restart(char *command) (*_machine_halt)(); } +void show_registers(struct pt_regs *regs); +static int tx4938_be_handler(struct pt_regs *regs, int is_fixup) +{ + int data = regs->cp0_cause & 4; + console_verbose(); + pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc); + pr_err("ccfg:%llx, toea:%llx\n", + (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg), + (unsigned long long)____raw_readq(&tx4938_ccfgptr->toea)); +#ifdef CONFIG_PCI + tx4927_report_pcic_status(); +#endif + show_registers(regs); + panic("BusError!"); +} +static void __init tx4938_be_init(void) +{ + board_be_handler = tx4938_be_handler; +} + static struct resource tx4938_sdram_resource[4]; static struct resource tx4938_sram_resource; @@ -257,6 +279,7 @@ void __init tx4938_setup(void) } _machine_restart = tx4938_machine_restart; + board_be_init = tx4938_be_init; } void __init tx4938_time_init(unsigned int tmrnr) -- cgit v1.2.3 From ee25d33f87348fd9e0ea148c4a25a3e7415fb5ba Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:17 +0900 Subject: MIPS: TXx9: Add __init tag for tx4938_pcic1_map_irq. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-tx4938.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c index 60e2c52c2c5e..1ea257bc3b8f 100644 --- a/arch/mips/pci/pci-tx4938.c +++ b/arch/mips/pci/pci-tx4938.c @@ -114,7 +114,7 @@ int __init tx4938_pciclk66_setup(void) return pciclk; } -int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot) +int __init tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot) { if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4938_pcic1ptr) { switch (slot) { -- cgit v1.2.3 From 3cd4e067a3e548a56a8b5e202552dcd18a2783a9 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 22 Aug 2008 17:00:22 +0200 Subject: MIPS: RB532: Cleanup and group definitions to their right places This patch moves GPIO related definitions to gpio.h and IRQ related to irq.h Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/rb532/devices.c | 16 ++-------------- include/asm-mips/mach-rc32434/gpio.h | 9 +++++++++ include/asm-mips/mach-rc32434/irq.h | 5 +++++ 3 files changed, 16 insertions(+), 14 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 82ab395efa33..7090dc97606f 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -34,21 +34,11 @@ #include #include #include - -#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0) -#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1) -#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9) -#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10) +#include #define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET) #define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET) -/* NAND definitions */ -#define GPIO_RDY (1 << 0x08) -#define GPIO_WPX (1 << 0x09) -#define GPIO_ALE (1 << 0x0a) -#define GPIO_CLE (1 << 0x0b) - static struct resource korina_dev0_res[] = { { .name = "korina_regs", @@ -101,8 +91,6 @@ static struct platform_device korina_dev0 = { .num_resources = ARRAY_SIZE(korina_dev0_res), }; -#define CF_GPIO_NUM 13 - static struct resource cf_slot0_res[] = { { .name = "cf_membase", @@ -116,7 +104,7 @@ static struct resource cf_slot0_res[] = { }; static struct cf_device cf_slot0_data = { - .gpio_pin = 13 + .gpio_pin = CF_GPIO_NUM }; static struct platform_device cf_slot0 = { diff --git a/include/asm-mips/mach-rc32434/gpio.h b/include/asm-mips/mach-rc32434/gpio.h index f946f5f45bbb..4fe18dbacaf7 100644 --- a/include/asm-mips/mach-rc32434/gpio.h +++ b/include/asm-mips/mach-rc32434/gpio.h @@ -61,6 +61,15 @@ struct rb532_gpio_reg { /* PCI messaging unit */ #define RC32434_PCI_MSU_GPIO (1 << 13) +/* NAND GPIO signals */ +#define GPIO_RDY (1 << 0x08) +#define GPIO_WPX (1 << 0x09) +#define GPIO_ALE (1 << 0x0a) +#define GPIO_CLE (1 << 0x0b) + +/* Compact Flash GPIO pin */ +#define CF_GPIO_NUM 13 + extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val); extern unsigned get_434_reg(unsigned reg_offs); diff --git a/include/asm-mips/mach-rc32434/irq.h b/include/asm-mips/mach-rc32434/irq.h index cb9e4725f5dc..d68318b6b76d 100644 --- a/include/asm-mips/mach-rc32434/irq.h +++ b/include/asm-mips/mach-rc32434/irq.h @@ -5,4 +5,9 @@ #include +#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0) +#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1) +#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9) +#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10) + #endif /* __ASM_RC32434_IRQ_H */ -- cgit v1.2.3 From 3c8cf8caa5b217fbb17d0dce7f6bbec1d7da7249 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 22 Aug 2008 17:01:03 +0200 Subject: MIPS: RB532: Use physical addresses for gpio and device controller registers This patch fixes the misuse of virtual addresses for the GPIO and third device controller which would lead to problems while accessing ioremap'd registers. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/rb532/gpio.c | 8 ++++---- include/asm-mips/mach-rc32434/rb.h | 3 ++- 2 files changed, 6 insertions(+), 5 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 00a1c7877bf4..11d7127655e3 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -47,8 +47,8 @@ struct mpmc_device dev3; static struct resource rb532_gpio_reg0_res[] = { { .name = "gpio_reg0", - .start = (u32)(IDT434_REG_BASE + GPIOBASE), - .end = (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)), + .start = REGBASE + GPIOBASE, + .end = REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1, .flags = IORESOURCE_MEM, } }; @@ -56,8 +56,8 @@ static struct resource rb532_gpio_reg0_res[] = { static struct resource rb532_dev3_ctl_res[] = { { .name = "dev3_ctl", - .start = (u32)(IDT434_REG_BASE + DEV3BASE), - .end = (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)), + .start = REGBASE + DEV3BASE, + .end = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1, .flags = IORESOURCE_MEM, } }; diff --git a/include/asm-mips/mach-rc32434/rb.h b/include/asm-mips/mach-rc32434/rb.h index e0a76e3ffea8..62ac73c999c4 100644 --- a/include/asm-mips/mach-rc32434/rb.h +++ b/include/asm-mips/mach-rc32434/rb.h @@ -17,7 +17,8 @@ #include -#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000)) +#define REGBASE 0x18000000 +#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(REGBASE)) #define DEV0BASE 0x010000 #define DEV0MASK 0x010004 #define DEV0C 0x010008 -- cgit v1.2.3 From 49afa0a15180c22c8836ef36edd6aa48ab7b2915 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 22 Aug 2008 17:01:31 +0200 Subject: MIPS: RB532: Remove gpio bootup state We are no longer using gpio bootup state, so do not export it and do not parse the kernel command line tag for it. Instead we provide gpio-keys for the button the gpio bootup state was checking. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/rb532/prom.c | 10 ---------- include/asm-mips/mach-rc32434/prom.h | 4 ---- 2 files changed, 14 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c index 1bc0af8febf4..c5d8868e1b15 100644 --- a/arch/mips/rb532/prom.c +++ b/arch/mips/rb532/prom.c @@ -41,8 +41,6 @@ extern void __init setup_serial_port(void); unsigned int idt_cpu_freq = 132000000; EXPORT_SYMBOL(idt_cpu_freq); -unsigned int gpio_bootup_state; -EXPORT_SYMBOL(gpio_bootup_state); static struct resource ddr_reg[] = { { @@ -108,9 +106,6 @@ void __init prom_setup_cmdline(void) mips_machtype = MACH_MIKROTIK_RB532; } - if (match_tag(prom_argv[i], GPIO_TAG)) - gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG); - strcpy(cp, prom_argv[i]); cp += strlen(prom_argv[i]); } @@ -122,11 +117,6 @@ void __init prom_setup_cmdline(void) strcpy(cp, arcs_cmdline); cp += strlen(arcs_cmdline); } - if (gpio_bootup_state & 0x02) - strcpy(cp, GPIO_INIT_NOBUTTON); - else - strcpy(cp, GPIO_INIT_BUTTON); - cmd_line[CL_SIZE-1] = '\0'; strcpy(arcs_cmdline, cmd_line); diff --git a/include/asm-mips/mach-rc32434/prom.h b/include/asm-mips/mach-rc32434/prom.h index 1d66ddcda89a..660707f1bcce 100644 --- a/include/asm-mips/mach-rc32434/prom.h +++ b/include/asm-mips/mach-rc32434/prom.h @@ -28,14 +28,10 @@ #define PROM_ENTRY(x) (0xbfc00000 + ((x) * 8)) -#define GPIO_INIT_NOBUTTON "" -#define GPIO_INIT_BUTTON " 2" - #define SR_NMI 0x00180000 #define SERIAL_SPEED_ENTRY 0x00000001 #define FREQ_TAG "HZ=" -#define GPIO_TAG "gpio=" #define KMAC_TAG "kmac=" #define MEM_TAG "mem=" #define BOARD_TAG "board=" -- cgit v1.2.3 From c76befc3429354909d3242d11b8d3bcb3bea4b03 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 22 Aug 2008 17:02:03 +0200 Subject: MIPS: RB532: replace raw volatile read with a readl This patch replaces a raw read using volatiles with a readl. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/rb532/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 11d7127655e3..b028779fedda 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -70,7 +70,7 @@ void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val) spin_lock_irqsave(&dev3.lock, flags); - data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs); + data = readl(IDT434_REG_BASE + reg_offs); for (i = 0; i != len; ++i) { if (val & (1 << i)) data |= (1 << (i + bit)); -- cgit v1.2.3 From b6e2f58a503b56e154f90dc516647c93c5fe873d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 22 Aug 2008 17:03:03 +0200 Subject: MIPS: RB532: Fix id usage in platform devices When there is only platform device of the same type, id = -1 should be used, fix this. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/rb532/devices.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 7090dc97606f..31619c601b11 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -84,7 +84,7 @@ static struct korina_device korina_dev0_data = { }; static struct platform_device korina_dev0 = { - .id = 0, + .id = -1, .name = "korina", .dev.platform_data = &korina_dev0_data, .resource = korina_dev0_res, @@ -108,7 +108,7 @@ static struct cf_device cf_slot0_data = { }; static struct platform_device cf_slot0 = { - .id = 0, + .id = -1, .name = "pata-rb532-cf", .dev.platform_data = &cf_slot0_data, .resource = cf_slot0_res, @@ -173,7 +173,7 @@ static struct mtd_partition rb532_partition_info[] = { static struct platform_device rb532_led = { .name = "rb532-led", - .id = 0, + .id = -1, }; static struct gpio_keys_button rb532_gpio_btn[] = { -- cgit v1.2.3 From deeb45ac4a32c8271b022ecba73913bc1112e8e6 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 23 Aug 2008 18:53:24 +0200 Subject: MIPS: RB532: Remove obsolute reference to setup_serial_port We are no longer using setup_serial_port. So just remove it from the prom code. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/rb532/prom.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c index c5d8868e1b15..46ca24dbcc2d 100644 --- a/arch/mips/rb532/prom.c +++ b/arch/mips/rb532/prom.c @@ -37,8 +37,6 @@ #include #include -extern void __init setup_serial_port(void); - unsigned int idt_cpu_freq = 132000000; EXPORT_SYMBOL(idt_cpu_freq); -- cgit v1.2.3 From 606a083b1e1a357cb66454e4581b80f1a67d8368 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 23 Aug 2008 18:53:50 +0200 Subject: MIPS: RB532: Cleanup the headers again This patch cleans up headers and regroups informations to where they should reside. While moving, try to have a consistant naming for defines. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/rb532/irq.c | 2 +- arch/mips/rb532/serial.c | 6 +++--- arch/mips/rb532/setup.c | 4 ++-- include/asm-mips/mach-rc32434/irq.h | 20 ++++++++++++++++++++ include/asm-mips/mach-rc32434/rb.h | 2 ++ include/asm-mips/mach-rc32434/rc32434.h | 30 ------------------------------ 6 files changed, 28 insertions(+), 36 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c index c0d0f950caf2..549b46d2fcee 100644 --- a/arch/mips/rb532/irq.c +++ b/arch/mips/rb532/irq.c @@ -45,7 +45,7 @@ #include #include -#include +#include struct intr_group { u32 mask; /* mask of valid bits in pending/mask registers */ diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c index 1a05b5ddee09..3e0d7ec3a579 100644 --- a/arch/mips/rb532/serial.c +++ b/arch/mips/rb532/serial.c @@ -31,16 +31,16 @@ #include #include -#include +#include extern unsigned int idt_cpu_freq; static struct uart_port rb532_uart = { .type = PORT_16550A, .line = 0, - .irq = RC32434_UART0_IRQ, + .irq = UART0_IRQ, .iotype = UPIO_MEM, - .membase = (char *)KSEG1ADDR(RC32434_UART0_BASE), + .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE), .regshift = 2 }; diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c index 7aafa95ac20b..50f530f5b602 100644 --- a/arch/mips/rb532/setup.c +++ b/arch/mips/rb532/setup.c @@ -9,7 +9,7 @@ #include #include -#include +#include #include struct pci_reg __iomem *pci_reg; @@ -27,7 +27,7 @@ static struct resource pci0_res[] = { static void rb_machine_restart(char *command) { /* just jump to the reset vector */ - writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST)); + writel(0x80000001, IDT434_REG_BASE + RST); ((void (*)(void)) KSEG1ADDR(0x1FC00000u))(); } diff --git a/include/asm-mips/mach-rc32434/irq.h b/include/asm-mips/mach-rc32434/irq.h index d68318b6b76d..56738d8ec4e2 100644 --- a/include/asm-mips/mach-rc32434/irq.h +++ b/include/asm-mips/mach-rc32434/irq.h @@ -4,6 +4,26 @@ #define NR_IRQS 256 #include +#include + +/* Interrupt Controller */ +#define IC_GROUP0_PEND (REGBASE + 0x38000) +#define IC_GROUP0_MASK (REGBASE + 0x38008) +#define IC_GROUP_OFFSET 0x0C + +#define NUM_INTR_GROUPS 5 + +/* 16550 UARTs */ +#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */ + /* GRP3 IRQ numbers start here */ +#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32) + /* GRP4 IRQ numbers start here */ +#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32) + /* GRP5 IRQ numbers start here */ +#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32) +#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32) + +#define UART0_IRQ (GROUP3_IRQ_BASE + 0) #define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0) #define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1) diff --git a/include/asm-mips/mach-rc32434/rb.h b/include/asm-mips/mach-rc32434/rb.h index 62ac73c999c4..79e8ef67d0d3 100644 --- a/include/asm-mips/mach-rc32434/rb.h +++ b/include/asm-mips/mach-rc32434/rb.h @@ -19,6 +19,8 @@ #define REGBASE 0x18000000 #define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(REGBASE)) +#define UART0BASE 0x58000 +#define RST (1 << 15) #define DEV0BASE 0x010000 #define DEV0MASK 0x010004 #define DEV0C 0x010008 diff --git a/include/asm-mips/mach-rc32434/rc32434.h b/include/asm-mips/mach-rc32434/rc32434.h index c4a02145104e..9df04b72744a 100644 --- a/include/asm-mips/mach-rc32434/rc32434.h +++ b/include/asm-mips/mach-rc32434/rc32434.h @@ -8,37 +8,7 @@ #include #include -#define RC32434_REG_BASE 0x18000000 -#define RC32434_RST (1 << 15) - #define IDT_CLOCK_MULT 2 -#define MIPS_CPU_TIMER_IRQ 7 - -/* Interrupt Controller */ -#define IC_GROUP0_PEND (RC32434_REG_BASE + 0x38000) -#define IC_GROUP0_MASK (RC32434_REG_BASE + 0x38008) -#define IC_GROUP_OFFSET 0x0C - -#define NUM_INTR_GROUPS 5 - -/* 16550 UARTs */ -#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */ - /* GRP3 IRQ numbers start here */ -#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32) - /* GRP4 IRQ numbers start here */ -#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32) - /* GRP5 IRQ numbers start here */ -#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32) -#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32) - - -#ifdef __MIPSEB__ -#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58003) -#else -#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58000) -#endif - -#define RC32434_UART0_IRQ (GROUP3_IRQ_BASE + 0) /* cpu pipeline flush */ static inline void rc32434_sync(void) -- cgit v1.2.3 From d888e25b8dd1b501ac75b0c6587c043a394319c3 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 23 Aug 2008 18:54:34 +0200 Subject: MIPS: RB532: Convert to GPIO lib This patch converts the rb532 code to use gpio library and register its gpio chip. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- arch/mips/rb532/gpio.c | 228 +++++++++++++++++++++++++---------- include/asm-mips/mach-rc32434/gpio.h | 75 +++--------- 3 files changed, 176 insertions(+), 129 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 1e06d233fa83..00a23a118492 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -568,7 +568,7 @@ config MIKROTIK_RB532 select SYS_SUPPORTS_LITTLE_ENDIAN select SWAP_IO_SPACE select BOOT_RAW - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB help Support the Mikrotik(tm) RouterBoard 532 series, based on the IDT RC32434 SoC. diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index b028779fedda..76a7fd96d564 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -27,20 +27,23 @@ */ #include -#include #include #include -#include #include -#include #include - -#include +#include #include - -struct rb532_gpio_reg __iomem *rb532_gpio_reg0; -EXPORT_SYMBOL(rb532_gpio_reg0); +#include + +struct rb532_gpio_chip { + struct gpio_chip chip; + void __iomem *regbase; + void (*set_int_level)(struct gpio_chip *chip, unsigned offset, int value); + int (*get_int_level)(struct gpio_chip *chip, unsigned offset); + void (*set_int_status)(struct gpio_chip *chip, unsigned offset, int value); + int (*get_int_status)(struct gpio_chip *chip, unsigned offset); +}; struct mpmc_device dev3; @@ -108,108 +111,199 @@ unsigned char get_latch_u5(void) } EXPORT_SYMBOL(get_latch_u5); -int rb532_gpio_get_value(unsigned gpio) +/* + * Return GPIO level */ +static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset) { - return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio); + u32 mask = 1 << offset; + struct rb532_gpio_chip *gpch; + + gpch = container_of(chip, struct rb532_gpio_chip, chip); + return readl(gpch->regbase + GPIOD) & mask; } -EXPORT_SYMBOL(rb532_gpio_get_value); -void rb532_gpio_set_value(unsigned gpio, int value) +/* + * Set output GPIO level + */ +static void rb532_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) { - unsigned tmp; + unsigned long flags; + u32 mask = 1 << offset; + u32 tmp; + struct rb532_gpio_chip *gpch; + void __iomem *gpvr; - tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio); - if (value) - tmp |= 1 << gpio; + gpch = container_of(chip, struct rb532_gpio_chip, chip); + gpvr = gpch->regbase + GPIOD; - writel(tmp, (void *)&rb532_gpio_reg0->gpiod); + local_irq_save(flags); + tmp = readl(gpvr); + if (value) + tmp |= mask; + else + tmp &= ~mask; + writel(tmp, gpvr); + local_irq_restore(flags); } -EXPORT_SYMBOL(rb532_gpio_set_value); -int rb532_gpio_direction_input(unsigned gpio) +/* + * Set GPIO direction to input + */ +static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { - writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio), - (void *)&rb532_gpio_reg0->gpiocfg); + unsigned long flags; + u32 mask = 1 << offset; + u32 value; + struct rb532_gpio_chip *gpch; + void __iomem *gpdr; - return 0; -} -EXPORT_SYMBOL(rb532_gpio_direction_input); + gpch = container_of(chip, struct rb532_gpio_chip, chip); + gpdr = gpch->regbase + GPIOCFG; -int rb532_gpio_direction_output(unsigned gpio, int value) -{ - gpio_set_value(gpio, value); - writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio), - (void *)&rb532_gpio_reg0->gpiocfg); + local_irq_save(flags); + value = readl(gpdr); + value &= ~mask; + writel(value, gpdr); + local_irq_restore(flags); return 0; } -EXPORT_SYMBOL(rb532_gpio_direction_output); -void rb532_gpio_set_int_level(unsigned gpio, int value) +/* + * Set GPIO direction to output + */ +static int rb532_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) { - unsigned tmp; + unsigned long flags; + u32 mask = 1 << offset; + u32 tmp; + struct rb532_gpio_chip *gpch; + void __iomem *gpdr; + + gpch = container_of(chip, struct rb532_gpio_chip, chip); + writel(mask, gpch->regbase + GPIOD); + gpdr = gpch->regbase + GPIOCFG; + + local_irq_save(flags); + tmp = readl(gpdr); + tmp |= mask; + writel(tmp, gpdr); + local_irq_restore(flags); - tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio); - if (value) - tmp |= 1 << gpio; - writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel); + return 0; } -EXPORT_SYMBOL(rb532_gpio_set_int_level); -int rb532_gpio_get_int_level(unsigned gpio) +/* + * Set the GPIO interrupt level + */ +static void rb532_gpio_set_int_level(struct gpio_chip *chip, + unsigned offset, int value) { - return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio); -} -EXPORT_SYMBOL(rb532_gpio_get_int_level); + unsigned long flags; + u32 mask = 1 << offset; + u32 tmp; + struct rb532_gpio_chip *gpch; + void __iomem *gpil; -void rb532_gpio_set_int_status(unsigned gpio, int value) -{ - unsigned tmp; + gpch = container_of(chip, struct rb532_gpio_chip, chip); + gpil = gpch->regbase + GPIOILEVEL; - tmp = readl(&rb532_gpio_reg0->gpioistat); + local_irq_save(flags); + tmp = readl(gpil); if (value) - tmp |= 1 << gpio; - writel(tmp, (void *)&rb532_gpio_reg0->gpioistat); + tmp |= mask; + else + tmp &= ~mask; + writel(tmp, gpil); + local_irq_restore(flags); } -EXPORT_SYMBOL(rb532_gpio_set_int_status); -int rb532_gpio_get_int_status(unsigned gpio) +/* + * Get the GPIO interrupt level + */ +static int rb532_gpio_get_int_level(struct gpio_chip *chip, unsigned offset) { - return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio); + u32 mask = 1 << offset; + struct rb532_gpio_chip *gpch; + + gpch = container_of(chip, struct rb532_gpio_chip, chip); + return readl(gpch->regbase + GPIOILEVEL) & mask; } -EXPORT_SYMBOL(rb532_gpio_get_int_status); -void rb532_gpio_set_func(unsigned gpio, int value) +/* + * Set the GPIO interrupt status + */ +static void rb532_gpio_set_int_status(struct gpio_chip *chip, + unsigned offset, int value) { - unsigned tmp; + unsigned long flags; + u32 mask = 1 << offset; + u32 tmp; + struct rb532_gpio_chip *gpch; + void __iomem *gpis; + + gpch = container_of(chip, struct rb532_gpio_chip, chip); + gpis = gpch->regbase + GPIOISTAT; - tmp = readl(&rb532_gpio_reg0->gpiofunc); + local_irq_save(flags); + tmp = readl(gpis); if (value) - tmp |= 1 << gpio; - writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc); + tmp |= mask; + else + tmp &= ~mask; + writel(tmp, gpis); + local_irq_restore(flags); } -EXPORT_SYMBOL(rb532_gpio_set_func); -int rb532_gpio_get_func(unsigned gpio) +/* + * Get the GPIO interrupt status + */ +static int rb532_gpio_get_int_status(struct gpio_chip *chip, unsigned offset) { - return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio); + u32 mask = 1 << offset; + struct rb532_gpio_chip *gpch; + + gpch = container_of(chip, struct rb532_gpio_chip, chip); + return readl(gpch->regbase + GPIOISTAT) & mask; } -EXPORT_SYMBOL(rb532_gpio_get_func); + +static struct rb532_gpio_chip rb532_gpio_chip[] = { + [0] = { + .chip = { + .label = "gpio0", + .direction_input = rb532_gpio_direction_input, + .direction_output = rb532_gpio_direction_output, + .get = rb532_gpio_get, + .set = rb532_gpio_set, + .base = 0, + .ngpio = 32, + }, + .get_int_level = rb532_gpio_get_int_level, + .set_int_level = rb532_gpio_set_int_level, + .get_int_status = rb532_gpio_get_int_status, + .set_int_status = rb532_gpio_set_int_status, + }, +}; int __init rb532_gpio_init(void) { - rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start, - rb532_gpio_reg0_res[0].end - - rb532_gpio_reg0_res[0].start); + struct resource *r; - if (!rb532_gpio_reg0) { + r = rb532_gpio_reg0_res; + rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start); + + if (!rb532_gpio_chip->regbase) { printk(KERN_ERR "rb532: cannot remap GPIO register 0\n"); return -ENXIO; } - dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start, - rb532_dev3_ctl_res[0].end - - rb532_dev3_ctl_res[0].start); + /* Register our GPIO chip */ + gpiochip_add(&rb532_gpio_chip->chip); + + r = rb532_dev3_ctl_res; + dev3.base = ioremap_nocache(r->start, r->end - r->start); if (!dev3.base) { printk(KERN_ERR "rb532: cannot remap device controller 3\n"); diff --git a/include/asm-mips/mach-rc32434/gpio.h b/include/asm-mips/mach-rc32434/gpio.h index 4fe18dbacaf7..3a70b41cd7a5 100644 --- a/include/asm-mips/mach-rc32434/gpio.h +++ b/include/asm-mips/mach-rc32434/gpio.h @@ -15,6 +15,16 @@ #include +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value + +#define gpio_cansleep __gpio_cansleep + +#define gpio_to_irq(gpio) IRQ_GPIO(gpio) +#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) + +#include + struct rb532_gpio_reg { u32 gpiofunc; /* GPIO Function Register * gpiofunc[x]==0 bit = gpio @@ -62,74 +72,17 @@ struct rb532_gpio_reg { #define RC32434_PCI_MSU_GPIO (1 << 13) /* NAND GPIO signals */ -#define GPIO_RDY (1 << 0x08) -#define GPIO_WPX (1 << 0x09) -#define GPIO_ALE (1 << 0x0a) -#define GPIO_CLE (1 << 0x0b) +#define GPIO_RDY 8 +#define GPIO_WPX 9 +#define GPIO_ALE 10 +#define GPIO_CLE 11 /* Compact Flash GPIO pin */ #define CF_GPIO_NUM 13 - extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val); extern unsigned get_434_reg(unsigned reg_offs); extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask); extern unsigned char get_latch_u5(void); -extern int rb532_gpio_get_value(unsigned gpio); -extern void rb532_gpio_set_value(unsigned gpio, int value); -extern int rb532_gpio_direction_input(unsigned gpio); -extern int rb532_gpio_direction_output(unsigned gpio, int value); -extern void rb532_gpio_set_int_level(unsigned gpio, int value); -extern int rb532_gpio_get_int_level(unsigned gpio); -extern void rb532_gpio_set_int_status(unsigned gpio, int value); -extern int rb532_gpio_get_int_status(unsigned gpio); - - -/* Wrappers for the arch-neutral GPIO API */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - /* Not yet implemented */ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ - /* Not yet implemented */ -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return rb532_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return rb532_gpio_direction_output(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return rb532_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - rb532_gpio_set_value(gpio, value); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return gpio; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq; -} - -/* For cansleep */ -#include - #endif /* _RC32434_GPIO_H_ */ -- cgit v1.2.3 From f6d9831bb11eb465f95fb1736b866d405d9c7cbf Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 1 Sep 2008 22:22:36 +0900 Subject: MIPS: TXx9: stop_unused_modules TXx9 SoCs have pin multiplex. Stop some controller modules which can not be used due to pin configurations. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup_tx4927.c | 31 +++++++++++++++++++ arch/mips/txx9/generic/setup_tx4938.c | 56 +++++++++++++++++++++++++++++++++++ 2 files changed, 87 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index c4248cbbd84a..914e93c62639 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -252,3 +252,34 @@ void __init tx4927_mtd_init(int ch) return; /* disabled */ txx9_physmap_flash_init(ch, start, size, &pdata); } + +static void __init tx4927_stop_unused_modules(void) +{ + __u64 pcfg, rst = 0, ckd = 0; + char buf[128]; + + buf[0] = '\0'; + local_irq_disable(); + pcfg = ____raw_readq(&tx4927_ccfgptr->pcfg); + if (!(pcfg & TX4927_PCFG_SEL2)) { + rst |= TX4927_CLKCTR_ACLRST; + ckd |= TX4927_CLKCTR_ACLCKD; + strcat(buf, " ACLC"); + } + if (rst | ckd) { + txx9_set64(&tx4927_ccfgptr->clkctr, rst); + txx9_set64(&tx4927_ccfgptr->clkctr, ckd); + } + local_irq_enable(); + if (buf[0]) + pr_info("%s: stop%s\n", txx9_pcode_str, buf); +} + +static int __init tx4927_late_init(void) +{ + if (txx9_pcode != 0x4927) + return -ENODEV; + tx4927_stop_unused_modules(); + return 0; +} +late_initcall(tx4927_late_init); diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index 0d8517ad3ad0..af724e53ef91 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -334,3 +334,59 @@ void __init tx4938_mtd_init(int ch) return; /* disabled */ txx9_physmap_flash_init(ch, start, size, &pdata); } + +static void __init tx4938_stop_unused_modules(void) +{ + __u64 pcfg, rst = 0, ckd = 0; + char buf[128]; + + buf[0] = '\0'; + local_irq_disable(); + pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); + switch (txx9_pcode) { + case 0x4937: + if (!(pcfg & TX4938_PCFG_SEL2)) { + rst |= TX4938_CLKCTR_ACLRST; + ckd |= TX4938_CLKCTR_ACLCKD; + strcat(buf, " ACLC"); + } + break; + case 0x4938: + if (!(pcfg & TX4938_PCFG_SEL2) || + (pcfg & TX4938_PCFG_ETH0_SEL)) { + rst |= TX4938_CLKCTR_ACLRST; + ckd |= TX4938_CLKCTR_ACLCKD; + strcat(buf, " ACLC"); + } + if ((pcfg & + (TX4938_PCFG_ATA_SEL | TX4938_PCFG_ISA_SEL | + TX4938_PCFG_NDF_SEL)) + != TX4938_PCFG_NDF_SEL) { + rst |= TX4938_CLKCTR_NDFRST; + ckd |= TX4938_CLKCTR_NDFCKD; + strcat(buf, " NDFMC"); + } + if (!(pcfg & TX4938_PCFG_SPI_SEL)) { + rst |= TX4938_CLKCTR_SPIRST; + ckd |= TX4938_CLKCTR_SPICKD; + strcat(buf, " SPI"); + } + break; + } + if (rst | ckd) { + txx9_set64(&tx4938_ccfgptr->clkctr, rst); + txx9_set64(&tx4938_ccfgptr->clkctr, ckd); + } + local_irq_enable(); + if (buf[0]) + pr_info("%s: stop%s\n", txx9_pcode_str, buf); +} + +static int __init tx4938_late_init(void) +{ + if (txx9_pcode != 0x4937 && txx9_pcode != 0x4938) + return -ENODEV; + tx4938_stop_unused_modules(); + return 0; +} +late_initcall(tx4938_late_init); -- cgit v1.2.3 From 21e77df215e58523a755b5dd006cb17610616f20 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 1 Sep 2008 22:22:37 +0900 Subject: MIPS: TXx9: Microoptimize interrupt handlers The IOC interrupt status register on RBTX49XX only have 8 bits. Use 8-bit version of __fls() to optimize interrupt handlers. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/rbtx4927/irq.c | 6 +++--- arch/mips/txx9/rbtx4938/irq.c | 8 ++++---- include/asm-mips/txx9/generic.h | 18 ++++++++++++++++++ 3 files changed, 25 insertions(+), 7 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c index 22076e3f03a8..9c14ebb26cb4 100644 --- a/arch/mips/txx9/rbtx4927/irq.c +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -133,9 +133,9 @@ static int toshiba_rbtx4927_irq_nested(int sw_irq) u8 level3; level3 = readb(rbtx4927_imstat_addr) & 0x1f; - if (level3) - sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1; - return sw_irq; + if (unlikely(!level3)) + return -1; + return RBTX4927_IRQ_IOC + __fls8(level3); } static void __init toshiba_rbtx4927_irq_ioc_init(void) diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c index ca2f8306ce93..7d21befb8932 100644 --- a/arch/mips/txx9/rbtx4938/irq.c +++ b/arch/mips/txx9/rbtx4938/irq.c @@ -85,10 +85,10 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq) u8 level3; level3 = readb(rbtx4938_imstat_addr); - if (level3) - /* must use fls so onboard ATA has priority */ - sw_irq = RBTX4938_IRQ_IOC + fls(level3) - 1; - return sw_irq; + if (unlikely(!level3)) + return -1; + /* must use fls so onboard ATA has priority */ + return RBTX4938_IRQ_IOC + __fls8(level3); } static void __init diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index 1e1a9f2d2379..dc85515eac13 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -64,4 +64,22 @@ struct physmap_flash_data; void txx9_physmap_flash_init(int no, unsigned long addr, unsigned long size, const struct physmap_flash_data *pdata); +/* 8 bit version of __fls(): find first bit set (returns 0..7) */ +static inline unsigned int __fls8(unsigned char x) +{ + int r = 7; + + if (!(x & 0xf0)) { + r -= 4; + x <<= 4; + } + if (!(x & 0xc0)) { + r -= 2; + x <<= 2; + } + if (!(x & 0x80)) + r -= 1; + return r; +} + #endif /* __ASM_TXX9_GENERIC_H */ -- cgit v1.2.3 From ae027ead87b13cff99b4f48da7696aa4fe75393b Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 1 Sep 2008 22:22:38 +0900 Subject: MIPS: TXx9: IOC LED support Add leds-gpio platform device for controlling LEDs connected to IOC on RBTX49XX and JMR3927 board. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 111 +++++++++++++++++++++++++++++++++++++++ arch/mips/txx9/jmr3927/setup.c | 5 ++ arch/mips/txx9/rbtx4927/setup.c | 1 + arch/mips/txx9/rbtx4938/setup.c | 1 + include/asm-mips/txx9/generic.h | 4 ++ include/asm-mips/txx9/rbtx4927.h | 1 + 6 files changed, 123 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 118d716f7832..1ea06553a1e1 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -649,3 +650,113 @@ void __init txx9_physmap_flash_init(int no, unsigned long addr, platform_device_put(pdev); #endif } + +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +static DEFINE_SPINLOCK(txx9_iocled_lock); + +#define TXX9_IOCLED_MAXLEDS 8 + +struct txx9_iocled_data { + struct gpio_chip chip; + u8 cur_val; + void __iomem *mmioaddr; + struct gpio_led_platform_data pdata; + struct gpio_led leds[TXX9_IOCLED_MAXLEDS]; + char names[TXX9_IOCLED_MAXLEDS][32]; +}; + +static int txx9_iocled_get(struct gpio_chip *chip, unsigned int offset) +{ + struct txx9_iocled_data *data = + container_of(chip, struct txx9_iocled_data, chip); + return data->cur_val & (1 << offset); +} + +static void txx9_iocled_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct txx9_iocled_data *data = + container_of(chip, struct txx9_iocled_data, chip); + unsigned long flags; + spin_lock_irqsave(&txx9_iocled_lock, flags); + if (value) + data->cur_val |= 1 << offset; + else + data->cur_val &= ~(1 << offset); + writeb(data->cur_val, data->mmioaddr); + mmiowb(); + spin_unlock_irqrestore(&txx9_iocled_lock, flags); +} + +static int txx9_iocled_dir_in(struct gpio_chip *chip, unsigned int offset) +{ + return 0; +} + +static int txx9_iocled_dir_out(struct gpio_chip *chip, unsigned int offset, + int value) +{ + txx9_iocled_set(chip, offset, value); + return 0; +} + +void __init txx9_iocled_init(unsigned long baseaddr, + int basenum, unsigned int num, int lowactive, + const char *color, char **deftriggers) +{ + struct txx9_iocled_data *iocled; + struct platform_device *pdev; + int i; + static char *default_triggers[] __initdata = { + "heartbeat", + "ide-disk", + "nand-disk", + NULL, + }; + + if (!deftriggers) + deftriggers = default_triggers; + iocled = kzalloc(sizeof(*iocled), GFP_KERNEL); + if (!iocled) + return; + iocled->mmioaddr = ioremap(baseaddr, 1); + if (!iocled->mmioaddr) + return; + iocled->chip.get = txx9_iocled_get; + iocled->chip.set = txx9_iocled_set; + iocled->chip.direction_input = txx9_iocled_dir_in; + iocled->chip.direction_output = txx9_iocled_dir_out; + iocled->chip.label = "iocled"; + iocled->chip.base = basenum; + iocled->chip.ngpio = num; + if (gpiochip_add(&iocled->chip)) + return; + if (basenum < 0) + basenum = iocled->chip.base; + + pdev = platform_device_alloc("leds-gpio", basenum); + if (!pdev) + return; + iocled->pdata.num_leds = num; + iocled->pdata.leds = iocled->leds; + for (i = 0; i < num; i++) { + struct gpio_led *led = &iocled->leds[i]; + snprintf(iocled->names[i], sizeof(iocled->names[i]), + "iocled:%s:%u", color, i); + led->name = iocled->names[i]; + led->gpio = basenum + i; + led->active_low = lowactive; + if (deftriggers && *deftriggers) + led->default_trigger = *deftriggers++; + } + pdev->dev.platform_data = &iocled->pdata; + if (platform_device_add(pdev)) + platform_device_put(pdev); +} +#else /* CONFIG_LEDS_GPIO */ +void __init txx9_iocled_init(unsigned long baseaddr, + int basenum, unsigned int num, int lowactive, + const char *color, char **deftriggers) +{ +} +#endif /* CONFIG_LEDS_GPIO */ diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 0f3843c92cf7..25e50a7be387 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -200,10 +200,15 @@ static void __init jmr3927_mtd_init(void) static void __init jmr3927_device_init(void) { + unsigned long iocled_base = JMR3927_IOC_LED_ADDR - IO_BASE; +#ifdef __LITTLE_ENDIAN + iocled_base |= 1; +#endif __swizzle_addr_b = jmr3927_swizzle_addr_b; jmr3927_rtc_init(); tx3927_wdt_init(); jmr3927_mtd_init(); + txx9_iocled_init(iocled_base, -1, 8, 1, "green", NULL); } struct txx9_board_vec jmr3927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index abe32c1a79dc..4a74423b2ba8 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -321,6 +321,7 @@ static void __init rbtx4927_device_init(void) rbtx4927_ne_init(); tx4927_wdt_init(); rbtx4927_mtd_init(); + txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL); } struct txx9_board_vec rbtx4927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index ec6e81258f73..e077cc4d3a59 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -352,6 +352,7 @@ static void __init rbtx4938_device_init(void) rbtx4938_ne_init(); tx4938_wdt_init(); rbtx4938_mtd_init(); + txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL); } struct txx9_board_vec rbtx4938_vec __initdata = { diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index dc85515eac13..4316a3e57678 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -82,4 +82,8 @@ static inline unsigned int __fls8(unsigned char x) return r; } +void txx9_iocled_init(unsigned long baseaddr, + int basenum, unsigned int num, int lowactive, + const char *color, char **deftriggers); + #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/include/asm-mips/txx9/rbtx4927.h b/include/asm-mips/txx9/rbtx4927.h index c6015463432e..b2adab3d1acc 100644 --- a/include/asm-mips/txx9/rbtx4927.h +++ b/include/asm-mips/txx9/rbtx4927.h @@ -34,6 +34,7 @@ #define RBTX4927_PCIIO 0x16000000 #define RBTX4927_PCIIO_SIZE 0x01000000 +#define RBTX4927_LED_ADDR (IO_BASE + TXX9_CE(2) + 0x00001000) #define RBTX4927_IMASK_ADDR (IO_BASE + TXX9_CE(2) + 0x00002000) #define RBTX4927_IMSTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x00002006) #define RBTX4927_SOFTINT_ADDR (IO_BASE + TXX9_CE(2) + 0x00003000) -- cgit v1.2.3 From 0dcdbe6add26719e956299eb519542f7d2f7d0a8 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 1 Sep 2008 22:22:39 +0900 Subject: MIPS: TXx9: Add TX4939 SoC support Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle create mode 100644 arch/mips/pci/pci-tx4939.c create mode 100644 arch/mips/txx9/generic/irq_tx4939.c create mode 100644 arch/mips/txx9/generic/setup_tx4939.c create mode 100644 include/asm-mips/txx9/tx4939.h --- arch/mips/pci/Makefile | 1 + arch/mips/pci/pci-tx4939.c | 109 +++++++ arch/mips/txx9/Kconfig | 7 + arch/mips/txx9/generic/Makefile | 1 + arch/mips/txx9/generic/irq_tx4939.c | 215 ++++++++++++++ arch/mips/txx9/generic/setup_tx4939.c | 460 ++++++++++++++++++++++++++++ include/asm-mips/txx9/tx4939.h | 544 ++++++++++++++++++++++++++++++++++ 7 files changed, 1337 insertions(+) create mode 100644 arch/mips/pci/pci-tx4939.c create mode 100644 arch/mips/txx9/generic/irq_tx4939.c create mode 100644 arch/mips/txx9/generic/setup_tx4939.c create mode 100644 include/asm-mips/txx9/tx4939.h (limited to 'arch/mips') diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index c8c32f417b6c..b1886244cedf 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o obj-$(CONFIG_SOC_TX4927) += pci-tx4927.o obj-$(CONFIG_SOC_TX4938) += pci-tx4938.o +obj-$(CONFIG_SOC_TX4939) += pci-tx4939.o obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o diff --git a/arch/mips/pci/pci-tx4939.c b/arch/mips/pci/pci-tx4939.c new file mode 100644 index 000000000000..5fecf1cdc325 --- /dev/null +++ b/arch/mips/pci/pci-tx4939.c @@ -0,0 +1,109 @@ +/* + * linux/arch/mips/pci/pci-tx4939.c + * + * Based on linux/arch/mips/txx9/rbtx4939/setup.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright 2001, 2003-2005 MontaVista Software Inc. + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +int __init tx4939_report_pciclk(void) +{ + int pciclk = 0; + + pr_info("PCIC --%s PCICLK:", + (__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCI66) ? + " PCI66" : ""); + if (__raw_readq(&tx4939_ccfgptr->pcfg) & TX4939_PCFG_PCICLKEN_ALL) { + pciclk = txx9_master_clock * 20 / 6; + if (!(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCI66)) + pciclk /= 2; + printk(KERN_CONT "Internal(%u.%uMHz)", + (pciclk + 50000) / 1000000, + ((pciclk + 50000) / 100000) % 10); + } else { + printk(KERN_CONT "External"); + pciclk = -1; + } + printk(KERN_CONT "\n"); + return pciclk; +} + +void __init tx4939_report_pci1clk(void) +{ + unsigned int pciclk = txx9_master_clock * 20 / 6; + + pr_info("PCIC1 -- PCICLK:%u.%uMHz\n", + (pciclk + 50000) / 1000000, + ((pciclk + 50000) / 100000) % 10); +} + +int __init tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot) +{ + if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4939_pcic1ptr) { + switch (slot) { + case TX4927_PCIC_IDSEL_AD_TO_SLOT(31): + if (__raw_readq(&tx4939_ccfgptr->pcfg) & + TX4939_PCFG_ET0MODE) + return TXX9_IRQ_BASE + TX4939_IR_ETH(0); + break; + case TX4927_PCIC_IDSEL_AD_TO_SLOT(30): + if (__raw_readq(&tx4939_ccfgptr->pcfg) & + TX4939_PCFG_ET1MODE) + return TXX9_IRQ_BASE + TX4939_IR_ETH(1); + break; + } + return 0; + } + return -1; +} + +int __init tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq = tx4939_pcic1_map_irq(dev, slot); + + if (irq >= 0) + return irq; + irq = pin; + /* IRQ rotation */ + irq--; /* 0-3 */ + irq = (irq + 33 - slot) % 4; + irq++; /* 1-4 */ + + switch (irq) { + case 1: + irq = TXX9_IRQ_BASE + TX4939_IR_INTA; + break; + case 2: + irq = TXX9_IRQ_BASE + TX4939_IR_INTB; + break; + case 3: + irq = TXX9_IRQ_BASE + TX4939_IR_INTC; + break; + case 4: + irq = TXX9_IRQ_BASE + TX4939_IR_INTD; + break; + } + return irq; +} + +void __init tx4939_setup_pcierr_irq(void) +{ + if (request_irq(TXX9_IRQ_BASE + TX4939_IR_PCIERR, + tx4927_pcierr_interrupt, + IRQF_DISABLED, "PCI error", + (void *)TX4939_PCIC_REG)) + pr_warning("Failed to request irq for PCIERR\n"); +} diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index aade3348af29..58691a1fe779 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -71,6 +71,13 @@ config SOC_TX4938 select PCI_TX4927 select GPIO_TXX9 +config SOC_TX4939 + bool + select CEVT_TXX9 + select HAS_TXX9_SERIAL + select HW_HAS_PCI + select PCI_TX4927 + config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" depends on PCI && MACH_TXX9 diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 986852cc774c..0030d23bef5b 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_SOC_TX3927) += setup_tx3927.o irq_tx3927.o obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o setup_tx4927.o irq_tx4927.o obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o +obj-$(CONFIG_SOC_TX4939) += setup_tx4939.o irq_tx4939.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o obj-$(CONFIG_SPI) += spi_eeprom.o diff --git a/arch/mips/txx9/generic/irq_tx4939.c b/arch/mips/txx9/generic/irq_tx4939.c new file mode 100644 index 000000000000..013213a8706b --- /dev/null +++ b/arch/mips/txx9/generic/irq_tx4939.c @@ -0,0 +1,215 @@ +/* + * TX4939 irq routines + * Based on linux/arch/mips/kernel/irq_txx9.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright 2001, 2003-2005 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * source@mvista.com + * Copyright (C) 2000-2001,2005-2007 Toshiba Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +/* + * TX4939 defines 64 IRQs. + * Similer to irq_txx9.c but different register layouts. + */ +#include +#include +#include +#include +#include +#include + +/* IRCER : Int. Control Enable */ +#define TXx9_IRCER_ICE 0x00000001 + +/* IRCR : Int. Control */ +#define TXx9_IRCR_LOW 0x00000000 +#define TXx9_IRCR_HIGH 0x00000001 +#define TXx9_IRCR_DOWN 0x00000002 +#define TXx9_IRCR_UP 0x00000003 +#define TXx9_IRCR_EDGE(cr) ((cr) & 0x00000002) + +/* IRSCR : Int. Status Control */ +#define TXx9_IRSCR_EIClrE 0x00000100 +#define TXx9_IRSCR_EIClr_MASK 0x0000000f + +/* IRCSR : Int. Current Status */ +#define TXx9_IRCSR_IF 0x00010000 + +#define irc_dlevel 0 +#define irc_elevel 1 + +static struct { + unsigned char level; + unsigned char mode; +} tx4939irq[TX4939_NUM_IR] __read_mostly; + +static void tx4939_irq_unmask(unsigned int irq) +{ + unsigned int irq_nr = irq - TXX9_IRQ_BASE; + u32 __iomem *lvlp; + int ofs; + if (irq_nr < 32) { + irq_nr--; + lvlp = &tx4939_ircptr->lvl[(irq_nr % 16) / 2].r; + } else { + irq_nr -= 32; + lvlp = &tx4939_ircptr->lvl[8 + (irq_nr % 16) / 2].r; + } + ofs = (irq_nr & 16) + (irq_nr & 1) * 8; + __raw_writel((__raw_readl(lvlp) & ~(0xff << ofs)) + | (tx4939irq[irq_nr].level << ofs), + lvlp); +} + +static inline void tx4939_irq_mask(unsigned int irq) +{ + unsigned int irq_nr = irq - TXX9_IRQ_BASE; + u32 __iomem *lvlp; + int ofs; + if (irq_nr < 32) { + irq_nr--; + lvlp = &tx4939_ircptr->lvl[(irq_nr % 16) / 2].r; + } else { + irq_nr -= 32; + lvlp = &tx4939_ircptr->lvl[8 + (irq_nr % 16) / 2].r; + } + ofs = (irq_nr & 16) + (irq_nr & 1) * 8; + __raw_writel((__raw_readl(lvlp) & ~(0xff << ofs)) + | (irc_dlevel << ofs), + lvlp); + mmiowb(); +} + +static void tx4939_irq_mask_ack(unsigned int irq) +{ + unsigned int irq_nr = irq - TXX9_IRQ_BASE; + + tx4939_irq_mask(irq); + if (TXx9_IRCR_EDGE(tx4939irq[irq_nr].mode)) { + irq_nr--; + /* clear edge detection */ + __raw_writel((TXx9_IRSCR_EIClrE | (irq_nr & 0xf)) + << (irq_nr & 0x10), + &tx4939_ircptr->edc.r); + } +} + +static int tx4939_irq_set_type(unsigned int irq, unsigned int flow_type) +{ + unsigned int irq_nr = irq - TXX9_IRQ_BASE; + u32 cr; + u32 __iomem *crp; + int ofs; + int mode; + + if (flow_type & IRQF_TRIGGER_PROBE) + return 0; + switch (flow_type & IRQF_TRIGGER_MASK) { + case IRQF_TRIGGER_RISING: + mode = TXx9_IRCR_UP; + break; + case IRQF_TRIGGER_FALLING: + mode = TXx9_IRCR_DOWN; + break; + case IRQF_TRIGGER_HIGH: + mode = TXx9_IRCR_HIGH; + break; + case IRQF_TRIGGER_LOW: + mode = TXx9_IRCR_LOW; + break; + default: + return -EINVAL; + } + if (irq_nr < 32) { + irq_nr--; + crp = &tx4939_ircptr->dm[(irq_nr & 8) >> 3].r; + } else { + irq_nr -= 32; + crp = &tx4939_ircptr->dm2[((irq_nr & 8) >> 3)].r; + } + ofs = (((irq_nr & 16) >> 1) | (irq_nr & (8 - 1))) * 2; + cr = __raw_readl(crp); + cr &= ~(0x3 << ofs); + cr |= (mode & 0x3) << ofs; + __raw_writel(cr, crp); + tx4939irq[irq_nr].mode = mode; + return 0; +} + +static struct irq_chip tx4939_irq_chip = { + .name = "TX4939", + .ack = tx4939_irq_mask_ack, + .mask = tx4939_irq_mask, + .mask_ack = tx4939_irq_mask_ack, + .unmask = tx4939_irq_unmask, + .set_type = tx4939_irq_set_type, +}; + +static int tx4939_irq_set_pri(int irc_irq, int new_pri) +{ + int old_pri; + + if ((unsigned int)irc_irq >= TX4939_NUM_IR) + return 0; + old_pri = tx4939irq[irc_irq].level; + tx4939irq[irc_irq].level = new_pri; + return old_pri; +} + +void __init tx4939_irq_init(void) +{ + int i; + + mips_cpu_irq_init(); + /* disable interrupt control */ + __raw_writel(0, &tx4939_ircptr->den.r); + __raw_writel(0, &tx4939_ircptr->maskint.r); + __raw_writel(0, &tx4939_ircptr->maskext.r); + /* irq_base + 0 is not used */ + for (i = 1; i < TX4939_NUM_IR; i++) { + tx4939irq[i].level = 4; /* middle level */ + tx4939irq[i].mode = TXx9_IRCR_LOW; + set_irq_chip_and_handler(TXX9_IRQ_BASE + i, + &tx4939_irq_chip, handle_level_irq); + } + + /* mask all IRC interrupts */ + __raw_writel(0, &tx4939_ircptr->msk.r); + for (i = 0; i < 16; i++) + __raw_writel(0, &tx4939_ircptr->lvl[i].r); + /* setup IRC interrupt mode (Low Active) */ + for (i = 0; i < 2; i++) + __raw_writel(0, &tx4939_ircptr->dm[i].r); + for (i = 0; i < 2; i++) + __raw_writel(0, &tx4939_ircptr->dm2[i].r); + /* enable interrupt control */ + __raw_writel(TXx9_IRCER_ICE, &tx4939_ircptr->den.r); + __raw_writel(irc_elevel, &tx4939_ircptr->msk.r); + + set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4939_IRC_INT, + handle_simple_irq); + + /* raise priority for errors, timers, sio */ + tx4939_irq_set_pri(TX4939_IR_WTOERR, 7); + tx4939_irq_set_pri(TX4939_IR_PCIERR, 7); + tx4939_irq_set_pri(TX4939_IR_PCIPME, 7); + for (i = 0; i < TX4939_NUM_IR_TMR; i++) + tx4939_irq_set_pri(TX4939_IR_TMR(i), 6); + for (i = 0; i < TX4939_NUM_IR_SIO; i++) + tx4939_irq_set_pri(TX4939_IR_SIO(i), 5); +} + +int tx4939_irq(void) +{ + u32 csr = __raw_readl(&tx4939_ircptr->cs.r); + + if (likely(!(csr & TXx9_IRCSR_IF))) + return TXX9_IRQ_BASE + (csr & (TX4939_NUM_IR - 1)); + return -1; +} diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c new file mode 100644 index 000000000000..f14a497077da --- /dev/null +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -0,0 +1,460 @@ +/* + * TX4939 setup routines + * Based on linux/arch/mips/txx9/generic/setup_tx4938.c, + * and RBTX49xx patch from CELF patch archive. + * + * 2003-2005 (c) MontaVista Software, Inc. + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void __init tx4939_wdr_init(void) +{ + /* report watchdog reset status */ + if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDRST) + pr_warning("Watchdog reset detected at 0x%lx\n", + read_c0_errorepc()); + /* clear WatchDogReset (W1C) */ + tx4939_ccfg_set(TX4939_CCFG_WDRST); + /* do reset on watchdog */ + tx4939_ccfg_set(TX4939_CCFG_WR); +} + +void __init tx4939_wdt_init(void) +{ + txx9_wdt_init(TX4939_TMR_REG(2) & 0xfffffffffULL); +} + +static void tx4939_machine_restart(char *command) +{ + local_irq_disable(); + pr_emerg("Rebooting (with %s watchdog reset)...\n", + (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDREXEN) ? + "external" : "internal"); + /* clear watchdog status */ + tx4939_ccfg_set(TX4939_CCFG_WDRST); /* W1C */ + txx9_wdt_now(TX4939_TMR_REG(2) & 0xfffffffffULL); + while (!(____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDRST)) + ; + mdelay(10); + if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDREXEN) { + pr_emerg("Rebooting (with internal watchdog reset)...\n"); + /* External WDRST failed. Do internal watchdog reset */ + tx4939_ccfg_clear(TX4939_CCFG_WDREXEN); + } + /* fallback */ + (*_machine_halt)(); +} + +void show_registers(struct pt_regs *regs); +static int tx4939_be_handler(struct pt_regs *regs, int is_fixup) +{ + int data = regs->cp0_cause & 4; + console_verbose(); + pr_err("%cBE exception at %#lx\n", + data ? 'D' : 'I', regs->cp0_epc); + pr_err("ccfg:%llx, toea:%llx\n", + (unsigned long long)____raw_readq(&tx4939_ccfgptr->ccfg), + (unsigned long long)____raw_readq(&tx4939_ccfgptr->toea)); +#ifdef CONFIG_PCI + tx4927_report_pcic_status(); +#endif + show_registers(regs); + panic("BusError!"); +} +static void __init tx4939_be_init(void) +{ + board_be_handler = tx4939_be_handler; +} + +static struct resource tx4939_sdram_resource[4]; +static struct resource tx4939_sram_resource; +#define TX4939_SRAM_SIZE 0x800 + +void __init tx4939_add_memory_regions(void) +{ + int i; + unsigned long start, size; + u64 win; + + for (i = 0; i < 4; i++) { + if (!((__u32)____raw_readq(&tx4939_ddrcptr->winen) & (1 << i))) + continue; + win = ____raw_readq(&tx4939_ddrcptr->win[i]); + start = (unsigned long)(win >> 48); + size = (((unsigned long)(win >> 32) & 0xffff) + 1) - start; + add_memory_region(start << 20, size << 20, BOOT_MEM_RAM); + } +} + +void __init tx4939_setup(void) +{ + int i; + __u32 divmode; + __u64 pcfg; + int cpuclk = 0; + + txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE, + TX4939_REG_SIZE); + set_c0_config(TX49_CONF_CWFON); + + /* SDRAMC,EBUSC are configured by PROM */ + for (i = 0; i < 4; i++) { + if (!(TX4939_EBUSC_CR(i) & 0x8)) + continue; /* disabled */ + txx9_ce_res[i].start = (unsigned long)TX4939_EBUSC_BA(i); + txx9_ce_res[i].end = + txx9_ce_res[i].start + TX4939_EBUSC_SIZE(i) - 1; + request_resource(&iomem_resource, &txx9_ce_res[i]); + } + + /* clocks */ + if (txx9_master_clock) { + /* calculate cpu_clock from master_clock */ + divmode = (__u32)____raw_readq(&tx4939_ccfgptr->ccfg) & + TX4939_CCFG_MULCLK_MASK; + cpuclk = txx9_master_clock * 20 / 2; + switch (divmode) { + case TX4939_CCFG_MULCLK_8: + cpuclk = cpuclk / 3 * 4 /* / 6 * 8 */; break; + case TX4939_CCFG_MULCLK_9: + cpuclk = cpuclk / 2 * 3 /* / 6 * 9 */; break; + case TX4939_CCFG_MULCLK_10: + cpuclk = cpuclk / 3 * 5 /* / 6 * 10 */; break; + case TX4939_CCFG_MULCLK_11: + cpuclk = cpuclk / 6 * 11; break; + case TX4939_CCFG_MULCLK_12: + cpuclk = cpuclk * 2 /* / 6 * 12 */; break; + case TX4939_CCFG_MULCLK_13: + cpuclk = cpuclk / 6 * 13; break; + case TX4939_CCFG_MULCLK_14: + cpuclk = cpuclk / 3 * 7 /* / 6 * 14 */; break; + case TX4939_CCFG_MULCLK_15: + cpuclk = cpuclk / 2 * 5 /* / 6 * 15 */; break; + } + txx9_cpu_clock = cpuclk; + } else { + if (txx9_cpu_clock == 0) + txx9_cpu_clock = 400000000; /* 400MHz */ + /* calculate master_clock from cpu_clock */ + cpuclk = txx9_cpu_clock; + divmode = (__u32)____raw_readq(&tx4939_ccfgptr->ccfg) & + TX4939_CCFG_MULCLK_MASK; + switch (divmode) { + case TX4939_CCFG_MULCLK_8: + txx9_master_clock = cpuclk * 6 / 8; break; + case TX4939_CCFG_MULCLK_9: + txx9_master_clock = cpuclk * 6 / 9; break; + case TX4939_CCFG_MULCLK_10: + txx9_master_clock = cpuclk * 6 / 10; break; + case TX4939_CCFG_MULCLK_11: + txx9_master_clock = cpuclk * 6 / 11; break; + case TX4939_CCFG_MULCLK_12: + txx9_master_clock = cpuclk * 6 / 12; break; + case TX4939_CCFG_MULCLK_13: + txx9_master_clock = cpuclk * 6 / 13; break; + case TX4939_CCFG_MULCLK_14: + txx9_master_clock = cpuclk * 6 / 14; break; + case TX4939_CCFG_MULCLK_15: + txx9_master_clock = cpuclk * 6 / 15; break; + } + txx9_master_clock /= 10; /* * 2 / 20 */ + } + /* calculate gbus_clock from cpu_clock */ + divmode = (__u32)____raw_readq(&tx4939_ccfgptr->ccfg) & + TX4939_CCFG_YDIVMODE_MASK; + txx9_gbus_clock = txx9_cpu_clock; + switch (divmode) { + case TX4939_CCFG_YDIVMODE_2: + txx9_gbus_clock /= 2; break; + case TX4939_CCFG_YDIVMODE_3: + txx9_gbus_clock /= 3; break; + case TX4939_CCFG_YDIVMODE_5: + txx9_gbus_clock /= 5; break; + case TX4939_CCFG_YDIVMODE_6: + txx9_gbus_clock /= 6; break; + } + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; + + /* CCFG */ + tx4939_wdr_init(); + /* clear BusErrorOnWrite flag (W1C) */ + tx4939_ccfg_set(TX4939_CCFG_WDRST | TX4939_CCFG_BEOW); + /* enable Timeout BusError */ + if (txx9_ccfg_toeon) + tx4939_ccfg_set(TX4939_CCFG_TOE); + + /* DMA selection */ + txx9_clear64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_DMASEL_ALL); + + /* Use external clock for external arbiter */ + if (!(____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCIARB)) + txx9_clear64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_PCICLKEN_ALL); + + pr_info("%s -- %dMHz(M%dMHz,G%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n", + txx9_pcode_str, + (cpuclk + 500000) / 1000000, + (txx9_master_clock + 500000) / 1000000, + (txx9_gbus_clock + 500000) / 1000000, + (__u32)____raw_readq(&tx4939_ccfgptr->crir), + (unsigned long long)____raw_readq(&tx4939_ccfgptr->ccfg), + (unsigned long long)____raw_readq(&tx4939_ccfgptr->pcfg)); + + pr_info("%s DDRC -- EN:%08x", txx9_pcode_str, + (__u32)____raw_readq(&tx4939_ddrcptr->winen)); + for (i = 0; i < 4; i++) { + __u64 win = ____raw_readq(&tx4939_ddrcptr->win[i]); + if (!((__u32)____raw_readq(&tx4939_ddrcptr->winen) & (1 << i))) + continue; /* disabled */ + printk(KERN_CONT " #%d:%016llx", i, (unsigned long long)win); + tx4939_sdram_resource[i].name = "DDR SDRAM"; + tx4939_sdram_resource[i].start = + (unsigned long)(win >> 48) << 20; + tx4939_sdram_resource[i].end = + ((((unsigned long)(win >> 32) & 0xffff) + 1) << + 20) - 1; + tx4939_sdram_resource[i].flags = IORESOURCE_MEM; + request_resource(&iomem_resource, &tx4939_sdram_resource[i]); + } + printk(KERN_CONT "\n"); + + /* SRAM */ + if (____raw_readq(&tx4939_sramcptr->cr) & 1) { + unsigned int size = TX4939_SRAM_SIZE; + tx4939_sram_resource.name = "SRAM"; + tx4939_sram_resource.start = + (____raw_readq(&tx4939_sramcptr->cr) >> (39-11)) + & ~(size - 1); + tx4939_sram_resource.end = + tx4939_sram_resource.start + TX4939_SRAM_SIZE - 1; + tx4939_sram_resource.flags = IORESOURCE_MEM; + request_resource(&iomem_resource, &tx4939_sram_resource); + } + + /* TMR */ + /* disable all timers */ + for (i = 0; i < TX4939_NR_TMR; i++) + txx9_tmr_init(TX4939_TMR_REG(i) & 0xfffffffffULL); + + /* DMA */ + for (i = 0; i < 2; i++) + ____raw_writeq(TX4938_DMA_MCR_MSTEN, + (void __iomem *)(TX4939_DMA_REG(i) + 0x50)); + + /* set PCIC1 reset (required to prevent hangup on BIST) */ + txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1RST); + pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg); + if (pcfg & (TX4939_PCFG_ET0MODE | TX4939_PCFG_ET1MODE)) { + mdelay(1); /* at least 128 cpu clock */ + /* clear PCIC1 reset */ + txx9_clear64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1RST); + } else { + pr_info("%s: stop PCIC1\n", txx9_pcode_str); + /* stop PCIC1 */ + txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1CKD); + } + if (!(pcfg & TX4939_PCFG_ET0MODE)) { + pr_info("%s: stop ETH0\n", txx9_pcode_str); + txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH0RST); + txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH0CKD); + } + if (!(pcfg & TX4939_PCFG_ET1MODE)) { + pr_info("%s: stop ETH1\n", txx9_pcode_str); + txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH1RST); + txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH1CKD); + } + + _machine_restart = tx4939_machine_restart; + board_be_init = tx4939_be_init; +} + +void __init tx4939_time_init(unsigned int tmrnr) +{ + if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_TINTDIS) + txx9_clockevent_init(TX4939_TMR_REG(tmrnr) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4939_IR_TMR(tmrnr), + TXX9_IMCLK); +} + +void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask) +{ + int i; + unsigned int ch_mask = 0; + __u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg); + + cts_mask |= ~1; /* only SIO0 have RTS/CTS */ + if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO0) + cts_mask |= 1 << 0; /* disable SIO0 RTS/CTS by PCFG setting */ + if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO2) + ch_mask |= 1 << 2; /* disable SIO2 by PCFG setting */ + if (pcfg & TX4939_PCFG_SIO3MODE) + ch_mask |= 1 << 3; /* disable SIO3 by PCFG setting */ + for (i = 0; i < 4; i++) { + if ((1 << i) & ch_mask) + continue; + txx9_sio_init(TX4939_SIO_REG(i) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4939_IR_SIO(i), + i, sclk, (1 << i) & cts_mask); + } +} + +#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE) +static int tx4939_get_eth_speed(struct net_device *dev) +{ + struct ethtool_cmd cmd = { ETHTOOL_GSET }; + int speed = 100; /* default 100Mbps */ + int err; + if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings) + return speed; + err = dev->ethtool_ops->get_settings(dev, &cmd); + if (err < 0) + return speed; + speed = cmd.speed == SPEED_100 ? 100 : 10; + return speed; +} +static int tx4939_netdev_event(struct notifier_block *this, + unsigned long event, + void *ptr) +{ + struct net_device *dev = ptr; + if (event == NETDEV_CHANGE && netif_carrier_ok(dev)) { + __u64 bit = 0; + if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(0)) + bit = TX4939_PCFG_SPEED0; + else if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(1)) + bit = TX4939_PCFG_SPEED1; + if (bit) { + int speed = tx4939_get_eth_speed(dev); + if (speed == 100) + txx9_set64(&tx4939_ccfgptr->pcfg, bit); + else + txx9_clear64(&tx4939_ccfgptr->pcfg, bit); + } + } + return NOTIFY_DONE; +} + +static struct notifier_block tx4939_netdev_notifier = { + .notifier_call = tx4939_netdev_event, + .priority = 1, +}; + +void __init tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1) +{ + u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg); + + if (addr0 && (pcfg & TX4939_PCFG_ET0MODE)) + txx9_ethaddr_init(TXX9_IRQ_BASE + TX4939_IR_ETH(0), addr0); + if (addr1 && (pcfg & TX4939_PCFG_ET1MODE)) + txx9_ethaddr_init(TXX9_IRQ_BASE + TX4939_IR_ETH(1), addr1); + register_netdevice_notifier(&tx4939_netdev_notifier); +} +#else +void __init tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1) +{ +} +#endif + +void __init tx4939_mtd_init(int ch) +{ + struct physmap_flash_data pdata = { + .width = TX4939_EBUSC_WIDTH(ch) / 8, + }; + unsigned long start = txx9_ce_res[ch].start; + unsigned long size = txx9_ce_res[ch].end - start + 1; + + if (!(TX4939_EBUSC_CR(ch) & 0x8)) + return; /* disabled */ + txx9_physmap_flash_init(ch, start, size, &pdata); +} + +static void __init tx4939_stop_unused_modules(void) +{ + __u64 pcfg, rst = 0, ckd = 0; + char buf[128]; + + buf[0] = '\0'; + local_irq_disable(); + pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg); + if ((pcfg & TX4939_PCFG_I2SMODE_MASK) != + TX4939_PCFG_I2SMODE_ACLC) { + rst |= TX4939_CLKCTR_ACLRST; + ckd |= TX4939_CLKCTR_ACLCKD; + strcat(buf, " ACLC"); + } + if ((pcfg & TX4939_PCFG_I2SMODE_MASK) != + TX4939_PCFG_I2SMODE_I2S && + (pcfg & TX4939_PCFG_I2SMODE_MASK) != + TX4939_PCFG_I2SMODE_I2S_ALT) { + rst |= TX4939_CLKCTR_I2SRST; + ckd |= TX4939_CLKCTR_I2SCKD; + strcat(buf, " I2S"); + } + if (!(pcfg & TX4939_PCFG_ATA0MODE)) { + rst |= TX4939_CLKCTR_ATA0RST; + ckd |= TX4939_CLKCTR_ATA0CKD; + strcat(buf, " ATA0"); + } + if (!(pcfg & TX4939_PCFG_ATA1MODE)) { + rst |= TX4939_CLKCTR_ATA1RST; + ckd |= TX4939_CLKCTR_ATA1CKD; + strcat(buf, " ATA1"); + } + if (pcfg & TX4939_PCFG_SPIMODE) { + rst |= TX4939_CLKCTR_SPIRST; + ckd |= TX4939_CLKCTR_SPICKD; + strcat(buf, " SPI"); + } + if (!(pcfg & (TX4939_PCFG_VSSMODE | TX4939_PCFG_VPSMODE))) { + rst |= TX4939_CLKCTR_VPCRST; + ckd |= TX4939_CLKCTR_VPCCKD; + strcat(buf, " VPC"); + } + if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO2) { + rst |= TX4939_CLKCTR_SIO2RST; + ckd |= TX4939_CLKCTR_SIO2CKD; + strcat(buf, " SIO2"); + } + if (pcfg & TX4939_PCFG_SIO3MODE) { + rst |= TX4939_CLKCTR_SIO3RST; + ckd |= TX4939_CLKCTR_SIO3CKD; + strcat(buf, " SIO3"); + } + if (rst | ckd) { + txx9_set64(&tx4939_ccfgptr->clkctr, rst); + txx9_set64(&tx4939_ccfgptr->clkctr, ckd); + } + local_irq_enable(); + if (buf[0]) + pr_info("%s: stop%s\n", txx9_pcode_str, buf); +} + +static int __init tx4939_late_init(void) +{ + if (txx9_pcode != 0x4939) + return -ENODEV; + tx4939_stop_unused_modules(); + return 0; +} +late_initcall(tx4939_late_init); diff --git a/include/asm-mips/txx9/tx4939.h b/include/asm-mips/txx9/tx4939.h new file mode 100644 index 000000000000..7ce2dff3b7cc --- /dev/null +++ b/include/asm-mips/txx9/tx4939.h @@ -0,0 +1,544 @@ +/* + * Definitions for TX4939 + * + * Copyright (C) 2000-2001,2005-2006 Toshiba Corporation + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_TXX9_TX4939_H +#define __ASM_TXX9_TX4939_H + +/* some controllers are compatible with 4927/4938 */ +#include + +#ifdef CONFIG_64BIT +#define TX4939_REG_BASE 0xffffffffff1f0000UL /* == TX4938_REG_BASE */ +#else +#define TX4939_REG_BASE 0xff1f0000UL /* == TX4938_REG_BASE */ +#endif +#define TX4939_REG_SIZE 0x00010000 /* == TX4938_REG_SIZE */ + +#define TX4939_ATA_REG(ch) (TX4939_REG_BASE + 0x3000 + (ch) * 0x1000) +#define TX4939_NDFMC_REG (TX4939_REG_BASE + 0x5000) +#define TX4939_SRAMC_REG (TX4939_REG_BASE + 0x6000) +#define TX4939_CRYPTO_REG (TX4939_REG_BASE + 0x6800) +#define TX4939_PCIC1_REG (TX4939_REG_BASE + 0x7000) +#define TX4939_DDRC_REG (TX4939_REG_BASE + 0x8000) +#define TX4939_EBUSC_REG (TX4939_REG_BASE + 0x9000) +#define TX4939_VPC_REG (TX4939_REG_BASE + 0xa000) +#define TX4939_DMA_REG(ch) (TX4939_REG_BASE + 0xb000 + (ch) * 0x800) +#define TX4939_PCIC_REG (TX4939_REG_BASE + 0xd000) +#define TX4939_CCFG_REG (TX4939_REG_BASE + 0xe000) +#define TX4939_IRC_REG (TX4939_REG_BASE + 0xe800) +#define TX4939_NR_TMR 6 /* 0xf000,0xf100,0xf200,0xfd00,0xfe00,0xff00 */ +#define TX4939_TMR_REG(ch) \ + (TX4939_REG_BASE + 0xf000 + ((ch) + ((ch) >= 3) * 10) * 0x100) +#define TX4939_NR_SIO 4 /* 0xf300, 0xf400, 0xf380, 0xf480 */ +#define TX4939_SIO_REG(ch) \ + (TX4939_REG_BASE + 0xf300 + (((ch) & 1) << 8) + (((ch) & 2) << 6)) +#define TX4939_ACLC_REG (TX4939_REG_BASE + 0xf700) +#define TX4939_SPI_REG (TX4939_REG_BASE + 0xf800) +#define TX4939_I2C_REG (TX4939_REG_BASE + 0xf900) +#define TX4939_I2S_REG (TX4939_REG_BASE + 0xfa00) +#define TX4939_RTC_REG (TX4939_REG_BASE + 0xfb00) +#define TX4939_CIR_REG (TX4939_REG_BASE + 0xfc00) + +struct tx4939_le_reg { + __u32 r; + __u32 unused; +}; + +struct tx4939_ddrc_reg { + struct tx4939_le_reg ctl[47]; + __u64 unused0[17]; + __u64 winen; + __u64 win[4]; +}; + +struct tx4939_ccfg_reg { + __u64 ccfg; + __u64 crir; + __u64 pcfg; + __u64 toea; + __u64 clkctr; + __u64 unused0; + __u64 garbc; + __u64 unused1[2]; + __u64 ramp; + __u64 unused2[2]; + __u64 dskwctrl; + __u64 mclkosc; + __u64 mclkctl; + __u64 unused3[17]; + struct { + __u64 mr; + __u64 dr; + } gpio[2]; +}; + +struct tx4939_irc_reg { + struct tx4939_le_reg den; + struct tx4939_le_reg scipb; + struct tx4939_le_reg dm[2]; + struct tx4939_le_reg lvl[16]; + struct tx4939_le_reg msk; + struct tx4939_le_reg edc; + struct tx4939_le_reg pnd0; + struct tx4939_le_reg cs; + struct tx4939_le_reg pnd1; + struct tx4939_le_reg dm2[2]; + struct tx4939_le_reg dbr[2]; + struct tx4939_le_reg dben; + struct tx4939_le_reg unused0[2]; + struct tx4939_le_reg flag[2]; + struct tx4939_le_reg pol; + struct tx4939_le_reg cnt; + struct tx4939_le_reg maskint; + struct tx4939_le_reg maskext; +}; + +struct tx4939_rtc_reg { + __u32 ctl; + __u32 adr; + __u32 dat; + __u32 tbc; +}; + +struct tx4939_crypto_reg { + struct tx4939_le_reg csr; + struct tx4939_le_reg idesptr; + struct tx4939_le_reg cdesptr; + struct tx4939_le_reg buserr; + struct tx4939_le_reg cip_tout; + struct tx4939_le_reg cir; + union { + struct { + struct tx4939_le_reg data[8]; + struct tx4939_le_reg ctrl; + } gen; + struct { + struct { + struct tx4939_le_reg l; + struct tx4939_le_reg u; + } key[3], ini; + struct tx4939_le_reg ctrl; + } des; + struct { + struct tx4939_le_reg key[4]; + struct tx4939_le_reg ini[4]; + struct tx4939_le_reg ctrl; + } aes; + struct { + struct { + struct tx4939_le_reg l; + struct tx4939_le_reg u; + } cnt; + struct tx4939_le_reg ini[5]; + struct tx4939_le_reg unused; + struct tx4939_le_reg ctrl; + } hash; + } cdr; + struct tx4939_le_reg unused0[7]; + struct tx4939_le_reg rcsr; + struct tx4939_le_reg rpr; + __u64 rdr; + __u64 ror[3]; + struct tx4939_le_reg unused1[2]; + struct tx4939_le_reg xorslr; + struct tx4939_le_reg xorsur; +}; + +struct tx4939_crypto_desc { + __u32 src; + __u32 dst; + __u32 next; + __u32 ctrl; + __u32 index; + __u32 xor; +}; + +struct tx4939_vpc_reg { + struct tx4939_le_reg csr; + struct { + struct tx4939_le_reg ctrlA; + struct tx4939_le_reg ctrlB; + struct tx4939_le_reg idesptr; + struct tx4939_le_reg cdesptr; + } port[3]; + struct tx4939_le_reg buserr; +}; + +struct tx4939_vpc_desc { + __u32 src; + __u32 next; + __u32 ctrl1; + __u32 ctrl2; +}; + +/* + * IRC + */ +#define TX4939_IR_NONE 0 +#define TX4939_IR_DDR 1 +#define TX4939_IR_WTOERR 2 +#define TX4939_NUM_IR_INT 3 +#define TX4939_IR_INT(n) (3 + (n)) +#define TX4939_NUM_IR_ETH 2 +#define TX4939_IR_ETH(n) ((n) ? 43 : 6) +#define TX4939_IR_VIDEO 7 +#define TX4939_IR_CIR 8 +#define TX4939_NUM_IR_SIO 4 +#define TX4939_IR_SIO(n) ((n) ? 43 + (n) : 9) /* 9,44-46 */ +#define TX4939_NUM_IR_DMA 4 +#define TX4939_IR_DMA(ch, n) (((ch) ? 22 : 10) + (n)) /* 10-13,22-25 */ +#define TX4939_IR_IRC 14 +#define TX4939_IR_PDMAC 15 +#define TX4939_NUM_IR_TMR 6 +#define TX4939_IR_TMR(n) (((n) >= 3 ? 45 : 16) + (n)) /* 16-18,48-50 */ +#define TX4939_NUM_IR_ATA 2 +#define TX4939_IR_ATA(n) (19 + (n)) +#define TX4939_IR_ACLC 21 +#define TX4939_IR_CIPHER 26 +#define TX4939_IR_INTA 27 +#define TX4939_IR_INTB 28 +#define TX4939_IR_INTC 29 +#define TX4939_IR_INTD 30 +#define TX4939_IR_I2C 33 +#define TX4939_IR_SPI 34 +#define TX4939_IR_PCIC 35 +#define TX4939_IR_PCIC1 36 +#define TX4939_IR_PCIERR 37 +#define TX4939_IR_PCIPME 38 +#define TX4939_IR_NDFMC 39 +#define TX4939_IR_ACLCPME 40 +#define TX4939_IR_RTC 41 +#define TX4939_IR_RND 42 +#define TX4939_IR_I2S 47 +#define TX4939_NUM_IR 64 + +#define TX4939_IRC_INT 2 /* IP[2] in Status register */ + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX4939_CCFG_PCIBOOT 0x0000040000000000ULL +#define TX4939_CCFG_WDRST 0x0000020000000000ULL +#define TX4939_CCFG_WDREXEN 0x0000010000000000ULL +#define TX4939_CCFG_BCFG_MASK 0x000000ff00000000ULL +#define TX4939_CCFG_GTOT_MASK 0x06000000 +#define TX4939_CCFG_GTOT_4096 0x06000000 +#define TX4939_CCFG_GTOT_2048 0x04000000 +#define TX4939_CCFG_GTOT_1024 0x02000000 +#define TX4939_CCFG_GTOT_512 0x00000000 +#define TX4939_CCFG_TINTDIS 0x01000000 +#define TX4939_CCFG_PCI66 0x00800000 +#define TX4939_CCFG_PCIMODE 0x00400000 +#define TX4939_CCFG_SSCG 0x00100000 +#define TX4939_CCFG_MULCLK_MASK 0x000e0000 +#define TX4939_CCFG_MULCLK_8 (0x7 << 17) +#define TX4939_CCFG_MULCLK_9 (0x0 << 17) +#define TX4939_CCFG_MULCLK_10 (0x1 << 17) +#define TX4939_CCFG_MULCLK_11 (0x2 << 17) +#define TX4939_CCFG_MULCLK_12 (0x3 << 17) +#define TX4939_CCFG_MULCLK_13 (0x4 << 17) +#define TX4939_CCFG_MULCLK_14 (0x5 << 17) +#define TX4939_CCFG_MULCLK_15 (0x6 << 17) +#define TX4939_CCFG_BEOW 0x00010000 +#define TX4939_CCFG_WR 0x00008000 +#define TX4939_CCFG_TOE 0x00004000 +#define TX4939_CCFG_PCIARB 0x00002000 +#define TX4939_CCFG_YDIVMODE_MASK 0x00001c00 +#define TX4939_CCFG_YDIVMODE_2 (0x0 << 10) +#define TX4939_CCFG_YDIVMODE_3 (0x1 << 10) +#define TX4939_CCFG_YDIVMODE_5 (0x6 << 10) +#define TX4939_CCFG_YDIVMODE_6 (0x7 << 10) +#define TX4939_CCFG_PTSEL 0x00000200 +#define TX4939_CCFG_BESEL 0x00000100 +#define TX4939_CCFG_SYSSP_MASK 0x000000c0 +#define TX4939_CCFG_ACKSEL 0x00000020 +#define TX4939_CCFG_ROMW 0x00000010 +#define TX4939_CCFG_ENDIAN 0x00000004 +#define TX4939_CCFG_ARMODE 0x00000002 +#define TX4939_CCFG_ACEHOLD 0x00000001 + +/* PCFG : Pin Configuration */ +#define TX4939_PCFG_SIO2MODE_MASK 0xc000000000000000ULL +#define TX4939_PCFG_SIO2MODE_GPIO 0x8000000000000000ULL +#define TX4939_PCFG_SIO2MODE_SIO2 0x4000000000000000ULL +#define TX4939_PCFG_SIO2MODE_SIO0 0x0000000000000000ULL +#define TX4939_PCFG_SPIMODE 0x2000000000000000ULL +#define TX4939_PCFG_I2CMODE 0x1000000000000000ULL +#define TX4939_PCFG_I2SMODE_MASK 0x0c00000000000000ULL +#define TX4939_PCFG_I2SMODE_GPIO 0x0c00000000000000ULL +#define TX4939_PCFG_I2SMODE_I2S 0x0800000000000000ULL +#define TX4939_PCFG_I2SMODE_I2S_ALT 0x0400000000000000ULL +#define TX4939_PCFG_I2SMODE_ACLC 0x0000000000000000ULL +#define TX4939_PCFG_SIO3MODE 0x0200000000000000ULL +#define TX4939_PCFG_DMASEL3 0x0004000000000000ULL +#define TX4939_PCFG_DMASEL3_SIO0 0x0004000000000000ULL +#define TX4939_PCFG_DMASEL3_NDFC 0x0000000000000000ULL +#define TX4939_PCFG_VSSMODE 0x0000200000000000ULL +#define TX4939_PCFG_VPSMODE 0x0000100000000000ULL +#define TX4939_PCFG_ET1MODE 0x0000080000000000ULL +#define TX4939_PCFG_ET0MODE 0x0000040000000000ULL +#define TX4939_PCFG_ATA1MODE 0x0000020000000000ULL +#define TX4939_PCFG_ATA0MODE 0x0000010000000000ULL +#define TX4939_PCFG_BP_PLL 0x0000000100000000ULL + +#define TX4939_PCFG_SYSCLKEN 0x08000000 +#define TX4939_PCFG_PCICLKEN_ALL 0x000f0000 +#define TX4939_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) +#define TX4939_PCFG_SPEED1 0x00002000 +#define TX4939_PCFG_SPEED0 0x00001000 +#define TX4939_PCFG_ITMODE 0x00000300 +#define TX4939_PCFG_DMASEL_ALL (0x00000007 | TX4939_PCFG_DMASEL3) +#define TX4939_PCFG_DMASEL2 0x00000004 +#define TX4939_PCFG_DMASEL2_DRQ2 0x00000000 +#define TX4939_PCFG_DMASEL2_SIO0 0x00000004 +#define TX4939_PCFG_DMASEL1 0x00000002 +#define TX4939_PCFG_DMASEL1_DRQ1 0x00000000 +#define TX4939_PCFG_DMASEL0 0x00000001 +#define TX4939_PCFG_DMASEL0_DRQ0 0x00000000 + +/* CLKCTR : Clock Control */ +#define TX4939_CLKCTR_IOSCKD 0x8000000000000000ULL +#define TX4939_CLKCTR_SYSCKD 0x4000000000000000ULL +#define TX4939_CLKCTR_TM5CKD 0x2000000000000000ULL +#define TX4939_CLKCTR_TM4CKD 0x1000000000000000ULL +#define TX4939_CLKCTR_TM3CKD 0x0800000000000000ULL +#define TX4939_CLKCTR_CIRCKD 0x0400000000000000ULL +#define TX4939_CLKCTR_SIO3CKD 0x0200000000000000ULL +#define TX4939_CLKCTR_SIO2CKD 0x0100000000000000ULL +#define TX4939_CLKCTR_SIO1CKD 0x0080000000000000ULL +#define TX4939_CLKCTR_VPCCKD 0x0040000000000000ULL +#define TX4939_CLKCTR_EPCICKD 0x0020000000000000ULL +#define TX4939_CLKCTR_ETH1CKD 0x0008000000000000ULL +#define TX4939_CLKCTR_ATA1CKD 0x0004000000000000ULL +#define TX4939_CLKCTR_BROMCKD 0x0002000000000000ULL +#define TX4939_CLKCTR_NDCCKD 0x0001000000000000ULL +#define TX4939_CLKCTR_I2CCKD 0x0000800000000000ULL +#define TX4939_CLKCTR_ETH0CKD 0x0000400000000000ULL +#define TX4939_CLKCTR_SPICKD 0x0000200000000000ULL +#define TX4939_CLKCTR_SRAMCKD 0x0000100000000000ULL +#define TX4939_CLKCTR_PCI1CKD 0x0000080000000000ULL +#define TX4939_CLKCTR_DMA1CKD 0x0000040000000000ULL +#define TX4939_CLKCTR_ACLCKD 0x0000020000000000ULL +#define TX4939_CLKCTR_ATA0CKD 0x0000010000000000ULL +#define TX4939_CLKCTR_DMA0CKD 0x0000008000000000ULL +#define TX4939_CLKCTR_PCICCKD 0x0000004000000000ULL +#define TX4939_CLKCTR_I2SCKD 0x0000002000000000ULL +#define TX4939_CLKCTR_TM0CKD 0x0000001000000000ULL +#define TX4939_CLKCTR_TM1CKD 0x0000000800000000ULL +#define TX4939_CLKCTR_TM2CKD 0x0000000400000000ULL +#define TX4939_CLKCTR_SIO0CKD 0x0000000200000000ULL +#define TX4939_CLKCTR_CYPCKD 0x0000000100000000ULL +#define TX4939_CLKCTR_IOSRST 0x80000000 +#define TX4939_CLKCTR_SYSRST 0x40000000 +#define TX4939_CLKCTR_TM5RST 0x20000000 +#define TX4939_CLKCTR_TM4RST 0x10000000 +#define TX4939_CLKCTR_TM3RST 0x08000000 +#define TX4939_CLKCTR_CIRRST 0x04000000 +#define TX4939_CLKCTR_SIO3RST 0x02000000 +#define TX4939_CLKCTR_SIO2RST 0x01000000 +#define TX4939_CLKCTR_SIO1RST 0x00800000 +#define TX4939_CLKCTR_VPCRST 0x00400000 +#define TX4939_CLKCTR_EPCIRST 0x00200000 +#define TX4939_CLKCTR_ETH1RST 0x00080000 +#define TX4939_CLKCTR_ATA1RST 0x00040000 +#define TX4939_CLKCTR_BROMRST 0x00020000 +#define TX4939_CLKCTR_NDCRST 0x00010000 +#define TX4939_CLKCTR_I2CRST 0x00008000 +#define TX4939_CLKCTR_ETH0RST 0x00004000 +#define TX4939_CLKCTR_SPIRST 0x00002000 +#define TX4939_CLKCTR_SRAMRST 0x00001000 +#define TX4939_CLKCTR_PCI1RST 0x00000800 +#define TX4939_CLKCTR_DMA1RST 0x00000400 +#define TX4939_CLKCTR_ACLRST 0x00000200 +#define TX4939_CLKCTR_ATA0RST 0x00000100 +#define TX4939_CLKCTR_DMA0RST 0x00000080 +#define TX4939_CLKCTR_PCICRST 0x00000040 +#define TX4939_CLKCTR_I2SRST 0x00000020 +#define TX4939_CLKCTR_TM0RST 0x00000010 +#define TX4939_CLKCTR_TM1RST 0x00000008 +#define TX4939_CLKCTR_TM2RST 0x00000004 +#define TX4939_CLKCTR_SIO0RST 0x00000002 +#define TX4939_CLKCTR_CYPRST 0x00000001 + +/* + * RTC + */ +#define TX4939_RTCCTL_ALME 0x00000080 +#define TX4939_RTCCTL_ALMD 0x00000040 +#define TX4939_RTCCTL_BUSY 0x00000020 + +#define TX4939_RTCCTL_COMMAND 0x00000007 +#define TX4939_RTCCTL_COMMAND_NOP 0x00000000 +#define TX4939_RTCCTL_COMMAND_GETTIME 0x00000001 +#define TX4939_RTCCTL_COMMAND_SETTIME 0x00000002 +#define TX4939_RTCCTL_COMMAND_GETALARM 0x00000003 +#define TX4939_RTCCTL_COMMAND_SETALARM 0x00000004 + +#define TX4939_RTCTBC_PM 0x00000080 +#define TX4939_RTCTBC_COMP 0x0000007f + +#define TX4939_RTC_REG_RAMSIZE 0x00000100 +#define TX4939_RTC_REG_RWBSIZE 0x00000006 + +/* + * CRYPTO + */ +#define TX4939_CRYPTO_CSR_SAESO 0x08000000 +#define TX4939_CRYPTO_CSR_SAESI 0x04000000 +#define TX4939_CRYPTO_CSR_SDESO 0x02000000 +#define TX4939_CRYPTO_CSR_SDESI 0x01000000 +#define TX4939_CRYPTO_CSR_INDXBST_MASK 0x00700000 +#define TX4939_CRYPTO_CSR_INDXBST(n) ((n) << 20) +#define TX4939_CRYPTO_CSR_TOINT 0x00080000 +#define TX4939_CRYPTO_CSR_DCINT 0x00040000 +#define TX4939_CRYPTO_CSR_GBINT 0x00010000 +#define TX4939_CRYPTO_CSR_INDXAST_MASK 0x0000e000 +#define TX4939_CRYPTO_CSR_INDXAST(n) ((n) << 13) +#define TX4939_CRYPTO_CSR_CSWAP_MASK 0x00001800 +#define TX4939_CRYPTO_CSR_CSWAP_NONE 0x00000000 +#define TX4939_CRYPTO_CSR_CSWAP_IN 0x00000800 +#define TX4939_CRYPTO_CSR_CSWAP_OUT 0x00001000 +#define TX4939_CRYPTO_CSR_CSWAP_BOTH 0x00001800 +#define TX4939_CRYPTO_CSR_CDIV_MASK 0x00000600 +#define TX4939_CRYPTO_CSR_CDIV_DIV2 0x00000000 +#define TX4939_CRYPTO_CSR_CDIV_DIV1 0x00000200 +#define TX4939_CRYPTO_CSR_CDIV_DIV2ALT 0x00000400 +#define TX4939_CRYPTO_CSR_CDIV_DIV1ALT 0x00000600 +#define TX4939_CRYPTO_CSR_PDINT_MASK 0x000000c0 +#define TX4939_CRYPTO_CSR_PDINT_ALL 0x00000000 +#define TX4939_CRYPTO_CSR_PDINT_END 0x00000040 +#define TX4939_CRYPTO_CSR_PDINT_NEXT 0x00000080 +#define TX4939_CRYPTO_CSR_PDINT_NONE 0x000000c0 +#define TX4939_CRYPTO_CSR_GINTE 0x00000008 +#define TX4939_CRYPTO_CSR_RSTD 0x00000004 +#define TX4939_CRYPTO_CSR_RSTC 0x00000002 +#define TX4939_CRYPTO_CSR_ENCR 0x00000001 + +/* bits for tx4939_crypto_reg.cdr.gen.ctrl */ +#define TX4939_CRYPTO_CTX_ENGINE_MASK 0x00000003 +#define TX4939_CRYPTO_CTX_ENGINE_DES 0x00000000 +#define TX4939_CRYPTO_CTX_ENGINE_AES 0x00000001 +#define TX4939_CRYPTO_CTX_ENGINE_MD5 0x00000002 +#define TX4939_CRYPTO_CTX_ENGINE_SHA1 0x00000003 +#define TX4939_CRYPTO_CTX_TDMS 0x00000010 +#define TX4939_CRYPTO_CTX_CMS 0x00000020 +#define TX4939_CRYPTO_CTX_DMS 0x00000040 +#define TX4939_CRYPTO_CTX_UPDATE 0x00000080 + +/* bits for tx4939_crypto_desc.ctrl */ +#define TX4939_CRYPTO_DESC_OB_CNT_MASK 0xffe00000 +#define TX4939_CRYPTO_DESC_OB_CNT(cnt) ((cnt) << 21) +#define TX4939_CRYPTO_DESC_IB_CNT_MASK 0x001ffc00 +#define TX4939_CRYPTO_DESC_IB_CNT(cnt) ((cnt) << 10) +#define TX4939_CRYPTO_DESC_START 0x00000200 +#define TX4939_CRYPTO_DESC_END 0x00000100 +#define TX4939_CRYPTO_DESC_XOR 0x00000010 +#define TX4939_CRYPTO_DESC_LAST 0x00000008 +#define TX4939_CRYPTO_DESC_ERR_MASK 0x00000006 +#define TX4939_CRYPTO_DESC_ERR_NONE 0x00000000 +#define TX4939_CRYPTO_DESC_ERR_TOUT 0x00000002 +#define TX4939_CRYPTO_DESC_ERR_DIGEST 0x00000004 +#define TX4939_CRYPTO_DESC_OWN 0x00000001 + +/* bits for tx4939_crypto_desc.index */ +#define TX4939_CRYPTO_DESC_HASH_IDX_MASK 0x00000070 +#define TX4939_CRYPTO_DESC_HASH_IDX(idx) ((idx) << 4) +#define TX4939_CRYPTO_DESC_ENCRYPT_IDX_MASK 0x00000007 +#define TX4939_CRYPTO_DESC_ENCRYPT_IDX(idx) ((idx) << 0) + +#define TX4939_CRYPTO_NR_SET 6 + +#define TX4939_CRYPTO_RCSR_INTE 0x00000008 +#define TX4939_CRYPTO_RCSR_RST 0x00000004 +#define TX4939_CRYPTO_RCSR_FIN 0x00000002 +#define TX4939_CRYPTO_RCSR_ST 0x00000001 + +/* + * VPC + */ +#define TX4939_VPC_CSR_GBINT 0x00010000 +#define TX4939_VPC_CSR_SWAPO 0x00000020 +#define TX4939_VPC_CSR_SWAPI 0x00000010 +#define TX4939_VPC_CSR_GINTE 0x00000008 +#define TX4939_VPC_CSR_RSTD 0x00000004 +#define TX4939_VPC_CSR_RSTVPC 0x00000002 + +#define TX4939_VPC_CTRLA_VDPSN 0x00000200 +#define TX4939_VPC_CTRLA_PBUSY 0x00000100 +#define TX4939_VPC_CTRLA_DCINT 0x00000080 +#define TX4939_VPC_CTRLA_UOINT 0x00000040 +#define TX4939_VPC_CTRLA_PDINT_MASK 0x00000030 +#define TX4939_VPC_CTRLA_PDINT_ALL 0x00000000 +#define TX4939_VPC_CTRLA_PDINT_NEXT 0x00000010 +#define TX4939_VPC_CTRLA_PDINT_NONE 0x00000030 +#define TX4939_VPC_CTRLA_VDVLDP 0x00000008 +#define TX4939_VPC_CTRLA_VDMODE 0x00000004 +#define TX4939_VPC_CTRLA_VDFOR 0x00000002 +#define TX4939_VPC_CTRLA_ENVPC 0x00000001 + +/* bits for tx4939_vpc_desc.ctrl1 */ +#define TX4939_VPC_DESC_CTRL1_ERR_MASK 0x00000006 +#define TX4939_VPC_DESC_CTRL1_OWN 0x00000001 + +#define tx4939_ddrcptr ((struct tx4939_ddrc_reg __iomem *)TX4939_DDRC_REG) +#define tx4939_ebuscptr tx4938_ebuscptr +#define tx4939_ircptr \ + ((struct tx4939_irc_reg __iomem *)TX4939_IRC_REG) +#define tx4939_pcicptr tx4938_pcicptr +#define tx4939_pcic1ptr tx4938_pcic1ptr +#define tx4939_ccfgptr \ + ((struct tx4939_ccfg_reg __iomem *)TX4939_CCFG_REG) +#define tx4939_sramcptr tx4938_sramcptr +#define tx4939_rtcptr \ + ((struct tx4939_rtc_reg __iomem *)TX4939_RTC_REG) +#define tx4939_cryptoptr \ + ((struct tx4939_crypto_reg __iomem *)TX4939_CRYPTO_REG) +#define tx4939_vpcptr ((struct tx4939_vpc_reg __iomem *)TX4939_VPC_REG) + +#define TX4939_REV_MAJ_MIN() \ + ((__u32)__raw_readq(&tx4939_ccfgptr->crir) & 0x00ff) +#define TX4939_REV_PCODE() \ + ((__u32)__raw_readq(&tx4939_ccfgptr->crir) >> 16) +#define TX4939_CCFG_BCFG() \ + ((__u32)((__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_BCFG_MASK) \ + >> 32)) + +#define tx4939_ccfg_clear(bits) tx4938_ccfg_clear(bits) +#define tx4939_ccfg_set(bits) tx4938_ccfg_set(bits) +#define tx4939_ccfg_change(change, new) tx4938_ccfg_change(change, new) + +#define TX4939_EBUSC_CR(ch) TX4927_EBUSC_CR(ch) +#define TX4939_EBUSC_BA(ch) TX4927_EBUSC_BA(ch) +#define TX4939_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch) +#define TX4939_EBUSC_WIDTH(ch) \ + (16 >> ((__u32)(TX4939_EBUSC_CR(ch) >> 20) & 0x1)) + +/* SCLK0 = MSTCLK * 429/19 * 16/245 / 2 (14.745MHz for MST 20MHz) */ +#define TX4939_SCLK0(mst) \ + ((((mst) + 245/2) / 245UL * 429 * 16 + 19) / 19 / 2) + +void tx4939_wdt_init(void); +void tx4939_add_memory_regions(void); +void tx4939_setup(void); +void tx4939_time_init(unsigned int tmrnr); +void tx4939_sio_init(unsigned int sclk, unsigned int cts_mask); +void tx4939_spi_init(int busid); +void tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1); +int tx4939_report_pciclk(void); +void tx4939_report_pci1clk(void); +struct pci_dev; +int tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot); +int tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +void tx4939_setup_pcierr_irq(void); +void tx4939_irq_init(void); +int tx4939_irq(void); +void tx4939_mtd_init(int ch); + +#endif /* __ASM_TXX9_TX4939_H */ -- cgit v1.2.3 From b27311e1cace4e296ace786c886d22f7a8ec78d6 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 1 Sep 2008 22:22:40 +0900 Subject: MIPS: TXx9: Add RBTX4939 board support Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle create mode 100644 arch/mips/txx9/rbtx4939/Makefile create mode 100644 arch/mips/txx9/rbtx4939/irq.c create mode 100644 arch/mips/txx9/rbtx4939/prom.c create mode 100644 arch/mips/txx9/rbtx4939/setup.c create mode 100644 include/asm-mips/txx9/rbtx4939.h --- arch/mips/Makefile | 8 +- arch/mips/txx9/Kconfig | 8 + arch/mips/txx9/generic/setup.c | 5 + arch/mips/txx9/rbtx4939/Makefile | 3 + arch/mips/txx9/rbtx4939/irq.c | 96 ++++++++++++ arch/mips/txx9/rbtx4939/prom.c | 17 +++ arch/mips/txx9/rbtx4939/setup.c | 306 +++++++++++++++++++++++++++++++++++++++ include/asm-mips/txx9/boards.h | 3 + include/asm-mips/txx9/rbtx4939.h | 133 +++++++++++++++++ 9 files changed, 573 insertions(+), 6 deletions(-) create mode 100644 arch/mips/txx9/rbtx4939/Makefile create mode 100644 arch/mips/txx9/rbtx4939/irq.c create mode 100644 arch/mips/txx9/rbtx4939/prom.c create mode 100644 arch/mips/txx9/rbtx4939/setup.c create mode 100644 include/asm-mips/txx9/rbtx4939.h (limited to 'arch/mips') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 9aab51caf16a..87f67228e309 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -567,15 +567,11 @@ cflags-$(CONFIG_MIKROTIK_RB532) += -Iinclude/asm-mips/mach-rc32434 load-$(CONFIG_MIKROTIK_RB532) += 0xffffffff80101000 # -# Toshiba RBTX4927 board or -# Toshiba RBTX4937 board +# Toshiba RBTX49XX boards # core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/rbtx4927/ - -# -# Toshiba RBTX4938 board -# core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/ +core-$(CONFIG_TOSHIBA_RBTX4939) += arch/mips/txx9/rbtx4939/ cflags-y += -Iinclude/asm-mips/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 58691a1fe779..17052db4161d 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -45,6 +45,14 @@ config TOSHIBA_RBTX4938 This Toshiba board is based on the TX4938 processor. Say Y here to support this machine type +config TOSHIBA_RBTX4939 + bool "Toshiba RBTX4939 bobard" + depends on MACH_TX49XX + select SOC_TX4939 + help + This Toshiba board is based on the TX4939 processor. Say Y here to + support this machine type + config SOC_TX3927 bool select CEVT_TXX9 diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 1ea06553a1e1..7a05c34c1dec 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -371,6 +371,11 @@ static void __init select_board(void) case 0x4938: txx9_board_vec = &rbtx4938_vec; break; +#endif +#ifdef CONFIG_TOSHIBA_RBTX4939 + case 0x4939: + txx9_board_vec = &rbtx4939_vec; + break; #endif } #endif diff --git a/arch/mips/txx9/rbtx4939/Makefile b/arch/mips/txx9/rbtx4939/Makefile new file mode 100644 index 000000000000..3232cd03a7d6 --- /dev/null +++ b/arch/mips/txx9/rbtx4939/Makefile @@ -0,0 +1,3 @@ +obj-y += irq.o setup.o prom.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/rbtx4939/irq.c b/arch/mips/txx9/rbtx4939/irq.c new file mode 100644 index 000000000000..500cc0a908e6 --- /dev/null +++ b/arch/mips/txx9/rbtx4939/irq.c @@ -0,0 +1,96 @@ +/* + * Toshiba RBTX4939 interrupt routines + * Based on linux/arch/mips/txx9/rbtx4938/irq.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright (C) 2000-2001,2005-2006 Toshiba Corporation + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include + +/* + * RBTX4939 IOC controller definition + */ + +static void rbtx4939_ioc_irq_unmask(unsigned int irq) +{ + int ioc_nr = irq - RBTX4939_IRQ_IOC; + + writeb(readb(rbtx4939_ien_addr) | (1 << ioc_nr), rbtx4939_ien_addr); +} + +static void rbtx4939_ioc_irq_mask(unsigned int irq) +{ + int ioc_nr = irq - RBTX4939_IRQ_IOC; + + writeb(readb(rbtx4939_ien_addr) & ~(1 << ioc_nr), rbtx4939_ien_addr); + mmiowb(); +} + +static struct irq_chip rbtx4939_ioc_irq_chip = { + .name = "IOC", + .ack = rbtx4939_ioc_irq_mask, + .mask = rbtx4939_ioc_irq_mask, + .mask_ack = rbtx4939_ioc_irq_mask, + .unmask = rbtx4939_ioc_irq_unmask, +}; + + +static inline int rbtx4939_ioc_irqroute(void) +{ + unsigned char istat = readb(rbtx4939_ifac2_addr); + + if (unlikely(istat == 0)) + return -1; + return RBTX4939_IRQ_IOC + __fls8(istat); +} + +static int rbtx4939_irq_dispatch(int pending) +{ + int irq; + + if (pending & CAUSEF_IP7) + return MIPS_CPU_IRQ_BASE + 7; + irq = tx4939_irq(); + if (likely(irq >= 0)) { + /* redirect IOC interrupts */ + switch (irq) { + case RBTX4939_IRQ_IOCINT: + irq = rbtx4939_ioc_irqroute(); + break; + } + } else if (pending & CAUSEF_IP0) + irq = MIPS_CPU_IRQ_BASE + 0; + else if (pending & CAUSEF_IP1) + irq = MIPS_CPU_IRQ_BASE + 1; + else + irq = -1; + return irq; +} + +void __init rbtx4939_irq_setup(void) +{ + int i; + + /* mask all IOC interrupts */ + writeb(0, rbtx4939_ien_addr); + + /* clear SoftInt interrupts */ + writeb(0, rbtx4939_softint_addr); + + txx9_irq_dispatch = rbtx4939_irq_dispatch; + + tx4939_irq_init(); + for (i = RBTX4939_IRQ_IOC; + i < RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC; i++) + set_irq_chip_and_handler(i, &rbtx4939_ioc_irq_chip, + handle_level_irq); + + set_irq_chained_handler(RBTX4939_IRQ_IOCINT, handle_simple_irq); +} diff --git a/arch/mips/txx9/rbtx4939/prom.c b/arch/mips/txx9/rbtx4939/prom.c new file mode 100644 index 000000000000..bd277ecb4ad6 --- /dev/null +++ b/arch/mips/txx9/rbtx4939/prom.c @@ -0,0 +1,17 @@ +/* + * rbtx4939 specific prom routines + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include + +void __init rbtx4939_prom_init(void) +{ + tx4939_add_memory_regions(); + txx9_sio_putchar_init(TX4939_SIO_REG(0) & 0xfffffffffULL); +} diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c new file mode 100644 index 000000000000..277864d5e779 --- /dev/null +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -0,0 +1,306 @@ +/* + * Toshiba RBTX4939 setup routines. + * Based on linux/arch/mips/txx9/rbtx4938/setup.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright (C) 2000-2001,2005-2007 Toshiba Corporation + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void rbtx4939_machine_restart(char *command) +{ + local_irq_disable(); + writeb(1, rbtx4939_reseten_addr); + writeb(1, rbtx4939_softreset_addr); + while (1) + ; +} + +static void __init rbtx4939_time_init(void) +{ + tx4939_time_init(0); +} + +static void __init rbtx4939_pci_setup(void) +{ +#ifdef CONFIG_PCI + int extarb = !(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCIARB); + struct pci_controller *c = &txx9_primary_pcic; + + register_pci_controller(c); + + tx4939_report_pciclk(); + tx4927_pcic_setup(tx4939_pcicptr, c, extarb); + if (!(__raw_readq(&tx4939_ccfgptr->pcfg) & TX4939_PCFG_ATA1MODE) && + (__raw_readq(&tx4939_ccfgptr->pcfg) & + (TX4939_PCFG_ET0MODE | TX4939_PCFG_ET1MODE))) { + tx4939_report_pci1clk(); + + /* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */ + c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000); + register_pci_controller(c); + tx4927_pcic_setup(tx4939_pcic1ptr, c, 0); + } + + tx4939_setup_pcierr_irq(); +#endif /* CONFIG_PCI */ +} + +static unsigned long long default_ebccr[] __initdata = { + 0x01c0000000007608ULL, /* 64M ROM */ + 0x017f000000007049ULL, /* 1M IOC */ + 0x0180000000408608ULL, /* ISA */ + 0, +}; + +static void __init rbtx4939_ebusc_setup(void) +{ + int i; + unsigned int sp; + + /* use user-configured speed */ + sp = TX4939_EBUSC_CR(0) & 0x30; + default_ebccr[0] |= sp; + default_ebccr[1] |= sp; + default_ebccr[2] |= sp; + /* initialise by myself */ + for (i = 0; i < ARRAY_SIZE(default_ebccr); i++) { + if (default_ebccr[i]) + ____raw_writeq(default_ebccr[i], + &tx4939_ebuscptr->cr[i]); + else + ____raw_writeq(____raw_readq(&tx4939_ebuscptr->cr[i]) + & ~8, + &tx4939_ebuscptr->cr[i]); + } +} + +static void __init rbtx4939_update_ioc_pen(void) +{ + __u64 pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg); + __u64 ccfg = ____raw_readq(&tx4939_ccfgptr->ccfg); + __u8 pe1 = readb(rbtx4939_pe1_addr); + __u8 pe2 = readb(rbtx4939_pe2_addr); + __u8 pe3 = readb(rbtx4939_pe3_addr); + if (pcfg & TX4939_PCFG_ATA0MODE) + pe1 |= RBTX4939_PE1_ATA(0); + else + pe1 &= ~RBTX4939_PE1_ATA(0); + if (pcfg & TX4939_PCFG_ATA1MODE) { + pe1 |= RBTX4939_PE1_ATA(1); + pe1 &= ~(RBTX4939_PE1_RMII(0) | RBTX4939_PE1_RMII(1)); + } else { + pe1 &= ~RBTX4939_PE1_ATA(1); + if (pcfg & TX4939_PCFG_ET0MODE) + pe1 |= RBTX4939_PE1_RMII(0); + else + pe1 &= ~RBTX4939_PE1_RMII(0); + if (pcfg & TX4939_PCFG_ET1MODE) + pe1 |= RBTX4939_PE1_RMII(1); + else + pe1 &= ~RBTX4939_PE1_RMII(1); + } + if (ccfg & TX4939_CCFG_PTSEL) + pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_P | + RBTX4939_PE3_VP_S); + else { + __u64 vmode = pcfg & + (TX4939_PCFG_VSSMODE | TX4939_PCFG_VPSMODE); + if (vmode == 0) + pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_P | + RBTX4939_PE3_VP_S); + else if (vmode == TX4939_PCFG_VPSMODE) { + pe3 |= RBTX4939_PE3_VP_P; + pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_S); + } else if (vmode == TX4939_PCFG_VSSMODE) { + pe3 |= RBTX4939_PE3_VP | RBTX4939_PE3_VP_S; + pe3 &= ~RBTX4939_PE3_VP_P; + } else { + pe3 |= RBTX4939_PE3_VP | RBTX4939_PE3_VP_P; + pe3 &= ~RBTX4939_PE3_VP_S; + } + } + if (pcfg & TX4939_PCFG_SPIMODE) { + if (pcfg & TX4939_PCFG_SIO2MODE_GPIO) + pe2 &= ~(RBTX4939_PE2_SIO2 | RBTX4939_PE2_SIO0); + else { + if (pcfg & TX4939_PCFG_SIO2MODE_SIO2) { + pe2 |= RBTX4939_PE2_SIO2; + pe2 &= ~RBTX4939_PE2_SIO0; + } else { + pe2 |= RBTX4939_PE2_SIO0; + pe2 &= ~RBTX4939_PE2_SIO2; + } + } + if (pcfg & TX4939_PCFG_SIO3MODE) + pe2 |= RBTX4939_PE2_SIO3; + else + pe2 &= ~RBTX4939_PE2_SIO3; + pe2 &= ~RBTX4939_PE2_SPI; + } else { + pe2 |= RBTX4939_PE2_SPI; + pe2 &= ~(RBTX4939_PE2_SIO3 | RBTX4939_PE2_SIO2 | + RBTX4939_PE2_SIO0); + } + if ((pcfg & TX4939_PCFG_I2SMODE_MASK) == TX4939_PCFG_I2SMODE_GPIO) + pe2 |= RBTX4939_PE2_GPIO; + else + pe2 &= ~RBTX4939_PE2_GPIO; + writeb(pe1, rbtx4939_pe1_addr); + writeb(pe2, rbtx4939_pe2_addr); + writeb(pe3, rbtx4939_pe3_addr); +} + +#define RBTX4939_MAX_7SEGLEDS 8 + +#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) +static u8 led_val[RBTX4939_MAX_7SEGLEDS]; +struct rbtx4939_led_data { + struct led_classdev cdev; + char name[32]; + unsigned int num; +}; + +/* Use "dot" in 7seg LEDs */ +static void rbtx4939_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct rbtx4939_led_data *led_dat = + container_of(led_cdev, struct rbtx4939_led_data, cdev); + unsigned int num = led_dat->num; + unsigned long flags; + + local_irq_save(flags); + led_val[num] = (led_val[num] & 0x7f) | (value ? 0x80 : 0); + writeb(led_val[num], rbtx4939_7seg_addr(num / 4, num % 4)); + local_irq_restore(flags); +} + +static int __init rbtx4939_led_probe(struct platform_device *pdev) +{ + struct rbtx4939_led_data *leds_data; + int i; + static char *default_triggers[] __initdata = { + "heartbeat", + "ide-disk", + "nand-disk", + }; + + leds_data = kzalloc(sizeof(*leds_data) * RBTX4939_MAX_7SEGLEDS, + GFP_KERNEL); + if (!leds_data) + return -ENOMEM; + for (i = 0; i < RBTX4939_MAX_7SEGLEDS; i++) { + int rc; + struct rbtx4939_led_data *led_dat = &leds_data[i]; + + led_dat->num = i; + led_dat->cdev.brightness_set = rbtx4939_led_brightness_set; + sprintf(led_dat->name, "rbtx4939:amber:%u", i); + led_dat->cdev.name = led_dat->name; + if (i < ARRAY_SIZE(default_triggers)) + led_dat->cdev.default_trigger = default_triggers[i]; + rc = led_classdev_register(&pdev->dev, &led_dat->cdev); + if (rc < 0) + return rc; + led_dat->cdev.brightness_set(&led_dat->cdev, 0); + } + return 0; + +} + +static struct platform_driver rbtx4939_led_driver = { + .driver = { + .name = "rbtx4939-led", + .owner = THIS_MODULE, + }, +}; + +static void __init rbtx4939_led_setup(void) +{ + platform_device_register_simple("rbtx4939-led", -1, NULL, 0); + platform_driver_probe(&rbtx4939_led_driver, rbtx4939_led_probe); +} +#else +static inline void rbtx4939_led_setup(void) +{ +} +#endif + +static void __init rbtx4939_arch_init(void) +{ + rbtx4939_pci_setup(); +} + +static void __init rbtx4939_device_init(void) +{ +#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE) + int i, j; + unsigned char ethaddr[2][6]; + for (i = 0; i < 2; i++) { + unsigned long area = CKSEG1 + 0x1fff0000 + (i * 0x10); + if (readb(rbtx4939_bdipsw_addr) & 8) { + u16 buf[3]; + area -= 0x03000000; + for (j = 0; j < 3; j++) + buf[j] = le16_to_cpup((u16 *)(area + j * 2)); + memcpy(ethaddr[i], buf, 6); + } else + memcpy(ethaddr[i], (void *)area, 6); + } + tx4939_ethaddr_init(ethaddr[0], ethaddr[1]); +#endif + rbtx4939_led_setup(); + tx4939_wdt_init(); +} + +static void __init rbtx4939_setup(void) +{ + rbtx4939_ebusc_setup(); + /* always enable ATA0 */ + txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE); + rbtx4939_update_ioc_pen(); + if (txx9_master_clock == 0) + txx9_master_clock = 20000000; + tx4939_setup(); + + _machine_restart = rbtx4939_machine_restart; + + pr_info("RBTX4939 (Rev %02x) --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", + readb(rbtx4939_board_rev_addr), readb(rbtx4939_ioc_rev_addr), + readb(rbtx4939_udipsw_addr), readb(rbtx4939_bdipsw_addr)); + +#ifdef CONFIG_PCI + txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0); + txx9_board_pcibios_setup = tx4927_pcibios_setup; +#else + set_io_port_base(RBTX4939_ETHER_BASE); +#endif + + tx4939_sio_init(TX4939_SCLK0(txx9_master_clock), 0); +} + +struct txx9_board_vec rbtx4939_vec __initdata = { + .system = "Tothiba RBTX4939", + .prom_init = rbtx4939_prom_init, + .mem_setup = rbtx4939_setup, + .irq_setup = rbtx4939_irq_setup, + .time_init = rbtx4939_time_init, + .device_init = rbtx4939_device_init, + .arch_init = rbtx4939_arch_init, +#ifdef CONFIG_PCI + .pci_map_irq = tx4939_pci_map_irq, +#endif +}; diff --git a/include/asm-mips/txx9/boards.h b/include/asm-mips/txx9/boards.h index 4abc8142fbb7..cbe9476d963e 100644 --- a/include/asm-mips/txx9/boards.h +++ b/include/asm-mips/txx9/boards.h @@ -8,3 +8,6 @@ BOARD_VEC(rbtx4937_vec) #ifdef CONFIG_TOSHIBA_RBTX4938 BOARD_VEC(rbtx4938_vec) #endif +#ifdef CONFIG_TOSHIBA_RBTX4939 +BOARD_VEC(rbtx4939_vec) +#endif diff --git a/include/asm-mips/txx9/rbtx4939.h b/include/asm-mips/txx9/rbtx4939.h new file mode 100644 index 000000000000..1acf428c0b4f --- /dev/null +++ b/include/asm-mips/txx9/rbtx4939.h @@ -0,0 +1,133 @@ +/* + * Definitions for RBTX4939 + * + * (C) Copyright TOSHIBA CORPORATION 2005-2006 + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_TXX9_RBTX4939_H +#define __ASM_TXX9_RBTX4939_H + +#include +#include +#include +#include + +/* Address map */ +#define RBTX4939_IOC_REG_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000) +#define RBTX4939_BOARD_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000) +#define RBTX4939_IOC_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000002) +#define RBTX4939_CONFIG1_ADDR (IO_BASE + TXX9_CE(1) + 0x00000004) +#define RBTX4939_CONFIG2_ADDR (IO_BASE + TXX9_CE(1) + 0x00000006) +#define RBTX4939_CONFIG3_ADDR (IO_BASE + TXX9_CE(1) + 0x00000008) +#define RBTX4939_CONFIG4_ADDR (IO_BASE + TXX9_CE(1) + 0x0000000a) +#define RBTX4939_USTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00001000) +#define RBTX4939_UDIPSW_ADDR (IO_BASE + TXX9_CE(1) + 0x00001002) +#define RBTX4939_BDIPSW_ADDR (IO_BASE + TXX9_CE(1) + 0x00001004) +#define RBTX4939_IEN_ADDR (IO_BASE + TXX9_CE(1) + 0x00002000) +#define RBTX4939_IPOL_ADDR (IO_BASE + TXX9_CE(1) + 0x00002002) +#define RBTX4939_IFAC1_ADDR (IO_BASE + TXX9_CE(1) + 0x00002004) +#define RBTX4939_IFAC2_ADDR (IO_BASE + TXX9_CE(1) + 0x00002006) +#define RBTX4939_SOFTINT_ADDR (IO_BASE + TXX9_CE(1) + 0x00003000) +#define RBTX4939_ISASTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00004000) +#define RBTX4939_PCISTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00004002) +#define RBTX4939_ROME_ADDR (IO_BASE + TXX9_CE(1) + 0x00004004) +#define RBTX4939_SPICS_ADDR (IO_BASE + TXX9_CE(1) + 0x00004006) +#define RBTX4939_AUDI_ADDR (IO_BASE + TXX9_CE(1) + 0x00004008) +#define RBTX4939_ISAGPIO_ADDR (IO_BASE + TXX9_CE(1) + 0x0000400a) +#define RBTX4939_PE1_ADDR (IO_BASE + TXX9_CE(1) + 0x00005000) +#define RBTX4939_PE2_ADDR (IO_BASE + TXX9_CE(1) + 0x00005002) +#define RBTX4939_PE3_ADDR (IO_BASE + TXX9_CE(1) + 0x00005004) +#define RBTX4939_VP_ADDR (IO_BASE + TXX9_CE(1) + 0x00005006) +#define RBTX4939_VPRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00005008) +#define RBTX4939_VPSOUT_ADDR (IO_BASE + TXX9_CE(1) + 0x0000500a) +#define RBTX4939_VPSIN_ADDR (IO_BASE + TXX9_CE(1) + 0x0000500c) +#define RBTX4939_7SEG_ADDR(s, ch) \ + (IO_BASE + TXX9_CE(1) + 0x00006000 + (s) * 16 + ((ch) & 3) * 2) +#define RBTX4939_SOFTRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00007000) +#define RBTX4939_RESETEN_ADDR (IO_BASE + TXX9_CE(1) + 0x00007002) +#define RBTX4939_RESETSTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00007004) +#define RBTX4939_ETHER_BASE (IO_BASE + TXX9_CE(1) + 0x00020000) + +/* Ethernet port address */ +#define RBTX4939_ETHER_ADDR (RBTX4939_ETHER_BASE + 0x300) + +/* bits for IEN/IPOL/IFAC */ +#define RBTX4938_INTB_ISA0 0 +#define RBTX4938_INTB_ISA11 1 +#define RBTX4938_INTB_ISA12 2 +#define RBTX4938_INTB_ISA15 3 +#define RBTX4938_INTB_I2S 4 +#define RBTX4938_INTB_SW 5 +#define RBTX4938_INTF_ISA0 (1 << RBTX4938_INTB_ISA0) +#define RBTX4938_INTF_ISA11 (1 << RBTX4938_INTB_ISA11) +#define RBTX4938_INTF_ISA12 (1 << RBTX4938_INTB_ISA12) +#define RBTX4938_INTF_ISA15 (1 << RBTX4938_INTB_ISA15) +#define RBTX4938_INTF_I2S (1 << RBTX4938_INTB_I2S) +#define RBTX4938_INTF_SW (1 << RBTX4938_INTB_SW) + +/* bits for PE1,PE2,PE3 */ +#define RBTX4939_PE1_ATA(ch) (0x01 << (ch)) +#define RBTX4939_PE1_RMII(ch) (0x04 << (ch)) +#define RBTX4939_PE2_SIO0 0x01 +#define RBTX4939_PE2_SIO2 0x02 +#define RBTX4939_PE2_SIO3 0x04 +#define RBTX4939_PE2_CIR 0x08 +#define RBTX4939_PE2_SPI 0x10 +#define RBTX4939_PE2_GPIO 0x20 +#define RBTX4939_PE3_VP 0x01 +#define RBTX4939_PE3_VP_P 0x02 +#define RBTX4939_PE3_VP_S 0x04 + +#define rbtx4939_board_rev_addr ((u8 __iomem *)RBTX4939_BOARD_REV_ADDR) +#define rbtx4939_ioc_rev_addr ((u8 __iomem *)RBTX4939_IOC_REV_ADDR) +#define rbtx4939_config1_addr ((u8 __iomem *)RBTX4939_CONFIG1_ADDR) +#define rbtx4939_config2_addr ((u8 __iomem *)RBTX4939_CONFIG2_ADDR) +#define rbtx4939_config3_addr ((u8 __iomem *)RBTX4939_CONFIG3_ADDR) +#define rbtx4939_config4_addr ((u8 __iomem *)RBTX4939_CONFIG4_ADDR) +#define rbtx4939_ustat_addr ((u8 __iomem *)RBTX4939_USTAT_ADDR) +#define rbtx4939_udipsw_addr ((u8 __iomem *)RBTX4939_UDIPSW_ADDR) +#define rbtx4939_bdipsw_addr ((u8 __iomem *)RBTX4939_BDIPSW_ADDR) +#define rbtx4939_ien_addr ((u8 __iomem *)RBTX4939_IEN_ADDR) +#define rbtx4939_ipol_addr ((u8 __iomem *)RBTX4939_IPOL_ADDR) +#define rbtx4939_ifac1_addr ((u8 __iomem *)RBTX4939_IFAC1_ADDR) +#define rbtx4939_ifac2_addr ((u8 __iomem *)RBTX4939_IFAC2_ADDR) +#define rbtx4939_softint_addr ((u8 __iomem *)RBTX4939_SOFTINT_ADDR) +#define rbtx4939_isastat_addr ((u8 __iomem *)RBTX4939_ISASTAT_ADDR) +#define rbtx4939_pcistat_addr ((u8 __iomem *)RBTX4939_PCISTAT_ADDR) +#define rbtx4939_rome_addr ((u8 __iomem *)RBTX4939_ROME_ADDR) +#define rbtx4939_spics_addr ((u8 __iomem *)RBTX4939_SPICS_ADDR) +#define rbtx4939_audi_addr ((u8 __iomem *)RBTX4939_AUDI_ADDR) +#define rbtx4939_isagpio_addr ((u8 __iomem *)RBTX4939_ISAGPIO_ADDR) +#define rbtx4939_pe1_addr ((u8 __iomem *)RBTX4939_PE1_ADDR) +#define rbtx4939_pe2_addr ((u8 __iomem *)RBTX4939_PE2_ADDR) +#define rbtx4939_pe3_addr ((u8 __iomem *)RBTX4939_PE3_ADDR) +#define rbtx4939_vp_addr ((u8 __iomem *)RBTX4939_VP_ADDR) +#define rbtx4939_vpreset_addr ((u8 __iomem *)RBTX4939_VPRESET_ADDR) +#define rbtx4939_vpsout_addr ((u8 __iomem *)RBTX4939_VPSOUT_ADDR) +#define rbtx4939_vpsin_addr ((u8 __iomem *)RBTX4939_VPSIN_ADDR) +#define rbtx4939_7seg_addr(s, ch) \ + ((u8 __iomem *)RBTX4939_7SEG_ADDR(s, ch)) +#define rbtx4939_softreset_addr ((u8 __iomem *)RBTX4939_SOFTRESET_ADDR) +#define rbtx4939_reseten_addr ((u8 __iomem *)RBTX4939_RESETEN_ADDR) +#define rbtx4939_resetstat_addr ((u8 __iomem *)RBTX4939_RESETSTAT_ADDR) + +/* + * IRQ mappings + */ +#define RBTX4939_NR_IRQ_IOC 8 + +#define RBTX4939_IRQ_IOC (TXX9_IRQ_BASE + TX4939_NUM_IR) +#define RBTX4939_IRQ_END (RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC) + +/* IOC (ISA, etc) */ +#define RBTX4939_IRQ_IOCINT (TXX9_IRQ_BASE + TX4939_IR_INT(0)) +/* Onboard 10M Ether */ +#define RBTX4939_IRQ_ETHER (TXX9_IRQ_BASE + TX4939_IR_INT(1)) + +void rbtx4939_prom_init(void); +void rbtx4939_irq_setup(void); + +#endif /* __ASM_TXX9_RBTX4939_H */ -- cgit v1.2.3 From b6263ff2d6e58cc2fe615219ab2a06778b5e6cef Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 1 Sep 2008 22:22:41 +0900 Subject: MIPS: TXx9: Implement prom_free_prom_memory Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 7a05c34c1dec..5526375010f8 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -394,6 +395,11 @@ void __init prom_init(void) void __init prom_free_prom_memory(void) { + unsigned long saddr = PAGE_SIZE; + unsigned long eaddr = __pa_symbol(&_text); + + if (saddr < eaddr) + free_init_pages("prom memory", saddr, eaddr); } const char *get_system_type(void) -- cgit v1.2.3 From e8c7c482347574ecdd45c43e32c332d5fc2ece61 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 16 Sep 2008 19:12:16 +0200 Subject: MIPS: Alchemy: rename directory It's more than the au1000 these days. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- arch/mips/Makefile | 30 +- arch/mips/alchemy/Kconfig | 136 +++++ arch/mips/alchemy/common/Makefile | 14 + arch/mips/alchemy/common/au1xxx_irqmap.c | 205 +++++++ arch/mips/alchemy/common/clocks.c | 93 +++ arch/mips/alchemy/common/cputable.c | 52 ++ arch/mips/alchemy/common/dbdma.c | 978 +++++++++++++++++++++++++++++++ arch/mips/alchemy/common/dma.c | 238 ++++++++ arch/mips/alchemy/common/gpio.c | 148 +++++ arch/mips/alchemy/common/irq.c | 596 +++++++++++++++++++ arch/mips/alchemy/common/pci.c | 104 ++++ arch/mips/alchemy/common/platform.c | 319 ++++++++++ arch/mips/alchemy/common/power.c | 465 +++++++++++++++ arch/mips/alchemy/common/prom.c | 146 +++++ arch/mips/alchemy/common/puts.c | 68 +++ arch/mips/alchemy/common/reset.c | 189 ++++++ arch/mips/alchemy/common/setup.c | 160 +++++ arch/mips/alchemy/common/sleeper.S | 154 +++++ arch/mips/alchemy/common/time.c | 266 +++++++++ arch/mips/alchemy/db1x00/Makefile | 8 + arch/mips/alchemy/db1x00/board_setup.c | 108 ++++ arch/mips/alchemy/db1x00/init.c | 62 ++ arch/mips/alchemy/db1x00/irqmap.c | 86 +++ arch/mips/alchemy/mtx-1/Makefile | 12 + arch/mips/alchemy/mtx-1/board_setup.c | 98 ++++ arch/mips/alchemy/mtx-1/init.c | 60 ++ arch/mips/alchemy/mtx-1/irqmap.c | 52 ++ arch/mips/alchemy/mtx-1/platform.c | 149 +++++ arch/mips/alchemy/pb1000/Makefile | 8 + arch/mips/alchemy/pb1000/board_setup.c | 165 ++++++ arch/mips/alchemy/pb1000/init.c | 57 ++ arch/mips/alchemy/pb1000/irqmap.c | 38 ++ arch/mips/alchemy/pb1100/Makefile | 8 + arch/mips/alchemy/pb1100/board_setup.c | 109 ++++ arch/mips/alchemy/pb1100/init.c | 60 ++ arch/mips/alchemy/pb1100/irqmap.c | 40 ++ arch/mips/alchemy/pb1200/Makefile | 8 + arch/mips/alchemy/pb1200/board_setup.c | 162 +++++ arch/mips/alchemy/pb1200/init.c | 58 ++ arch/mips/alchemy/pb1200/irqmap.c | 160 +++++ arch/mips/alchemy/pb1200/platform.c | 85 +++ arch/mips/alchemy/pb1500/Makefile | 8 + arch/mips/alchemy/pb1500/board_setup.c | 119 ++++ arch/mips/alchemy/pb1500/init.c | 58 ++ arch/mips/alchemy/pb1500/irqmap.c | 46 ++ arch/mips/alchemy/pb1550/Makefile | 8 + arch/mips/alchemy/pb1550/board_setup.c | 58 ++ arch/mips/alchemy/pb1550/init.c | 58 ++ arch/mips/alchemy/pb1550/irqmap.c | 43 ++ arch/mips/alchemy/xxs1500/Makefile | 8 + arch/mips/alchemy/xxs1500/board_setup.c | 79 +++ arch/mips/alchemy/xxs1500/init.c | 58 ++ arch/mips/alchemy/xxs1500/irqmap.c | 49 ++ arch/mips/au1000/Kconfig | 136 ----- arch/mips/au1000/common/Makefile | 14 - arch/mips/au1000/common/au1xxx_irqmap.c | 205 ------- arch/mips/au1000/common/clocks.c | 93 --- arch/mips/au1000/common/cputable.c | 52 -- arch/mips/au1000/common/dbdma.c | 978 ------------------------------- arch/mips/au1000/common/dma.c | 238 -------- arch/mips/au1000/common/gpio.c | 148 ----- arch/mips/au1000/common/irq.c | 596 ------------------- arch/mips/au1000/common/pci.c | 104 ---- arch/mips/au1000/common/platform.c | 319 ---------- arch/mips/au1000/common/power.c | 465 --------------- arch/mips/au1000/common/prom.c | 146 ----- arch/mips/au1000/common/puts.c | 68 --- arch/mips/au1000/common/reset.c | 189 ------ arch/mips/au1000/common/setup.c | 160 ----- arch/mips/au1000/common/sleeper.S | 154 ----- arch/mips/au1000/common/time.c | 266 --------- arch/mips/au1000/db1x00/Makefile | 8 - arch/mips/au1000/db1x00/board_setup.c | 108 ---- arch/mips/au1000/db1x00/init.c | 62 -- arch/mips/au1000/db1x00/irqmap.c | 86 --- arch/mips/au1000/mtx-1/Makefile | 12 - arch/mips/au1000/mtx-1/board_setup.c | 98 ---- arch/mips/au1000/mtx-1/init.c | 60 -- arch/mips/au1000/mtx-1/irqmap.c | 52 -- arch/mips/au1000/mtx-1/platform.c | 149 ----- arch/mips/au1000/pb1000/Makefile | 8 - arch/mips/au1000/pb1000/board_setup.c | 165 ------ arch/mips/au1000/pb1000/init.c | 57 -- arch/mips/au1000/pb1000/irqmap.c | 38 -- arch/mips/au1000/pb1100/Makefile | 8 - arch/mips/au1000/pb1100/board_setup.c | 109 ---- arch/mips/au1000/pb1100/init.c | 60 -- arch/mips/au1000/pb1100/irqmap.c | 40 -- arch/mips/au1000/pb1200/Makefile | 8 - arch/mips/au1000/pb1200/board_setup.c | 162 ----- arch/mips/au1000/pb1200/init.c | 58 -- arch/mips/au1000/pb1200/irqmap.c | 160 ----- arch/mips/au1000/pb1200/platform.c | 85 --- arch/mips/au1000/pb1500/Makefile | 8 - arch/mips/au1000/pb1500/board_setup.c | 119 ---- arch/mips/au1000/pb1500/init.c | 58 -- arch/mips/au1000/pb1500/irqmap.c | 46 -- arch/mips/au1000/pb1550/Makefile | 8 - arch/mips/au1000/pb1550/board_setup.c | 58 -- arch/mips/au1000/pb1550/init.c | 58 -- arch/mips/au1000/pb1550/irqmap.c | 43 -- arch/mips/au1000/xxs1500/Makefile | 8 - arch/mips/au1000/xxs1500/board_setup.c | 79 --- arch/mips/au1000/xxs1500/init.c | 58 -- arch/mips/au1000/xxs1500/irqmap.c | 49 -- 106 files changed, 6532 insertions(+), 6532 deletions(-) create mode 100644 arch/mips/alchemy/Kconfig create mode 100644 arch/mips/alchemy/common/Makefile create mode 100644 arch/mips/alchemy/common/au1xxx_irqmap.c create mode 100644 arch/mips/alchemy/common/clocks.c create mode 100644 arch/mips/alchemy/common/cputable.c create mode 100644 arch/mips/alchemy/common/dbdma.c create mode 100644 arch/mips/alchemy/common/dma.c create mode 100644 arch/mips/alchemy/common/gpio.c create mode 100644 arch/mips/alchemy/common/irq.c create mode 100644 arch/mips/alchemy/common/pci.c create mode 100644 arch/mips/alchemy/common/platform.c create mode 100644 arch/mips/alchemy/common/power.c create mode 100644 arch/mips/alchemy/common/prom.c create mode 100644 arch/mips/alchemy/common/puts.c create mode 100644 arch/mips/alchemy/common/reset.c create mode 100644 arch/mips/alchemy/common/setup.c create mode 100644 arch/mips/alchemy/common/sleeper.S create mode 100644 arch/mips/alchemy/common/time.c create mode 100644 arch/mips/alchemy/db1x00/Makefile create mode 100644 arch/mips/alchemy/db1x00/board_setup.c create mode 100644 arch/mips/alchemy/db1x00/init.c create mode 100644 arch/mips/alchemy/db1x00/irqmap.c create mode 100644 arch/mips/alchemy/mtx-1/Makefile create mode 100644 arch/mips/alchemy/mtx-1/board_setup.c create mode 100644 arch/mips/alchemy/mtx-1/init.c create mode 100644 arch/mips/alchemy/mtx-1/irqmap.c create mode 100644 arch/mips/alchemy/mtx-1/platform.c create mode 100644 arch/mips/alchemy/pb1000/Makefile create mode 100644 arch/mips/alchemy/pb1000/board_setup.c create mode 100644 arch/mips/alchemy/pb1000/init.c create mode 100644 arch/mips/alchemy/pb1000/irqmap.c create mode 100644 arch/mips/alchemy/pb1100/Makefile create mode 100644 arch/mips/alchemy/pb1100/board_setup.c create mode 100644 arch/mips/alchemy/pb1100/init.c create mode 100644 arch/mips/alchemy/pb1100/irqmap.c create mode 100644 arch/mips/alchemy/pb1200/Makefile create mode 100644 arch/mips/alchemy/pb1200/board_setup.c create mode 100644 arch/mips/alchemy/pb1200/init.c create mode 100644 arch/mips/alchemy/pb1200/irqmap.c create mode 100644 arch/mips/alchemy/pb1200/platform.c create mode 100644 arch/mips/alchemy/pb1500/Makefile create mode 100644 arch/mips/alchemy/pb1500/board_setup.c create mode 100644 arch/mips/alchemy/pb1500/init.c create mode 100644 arch/mips/alchemy/pb1500/irqmap.c create mode 100644 arch/mips/alchemy/pb1550/Makefile create mode 100644 arch/mips/alchemy/pb1550/board_setup.c create mode 100644 arch/mips/alchemy/pb1550/init.c create mode 100644 arch/mips/alchemy/pb1550/irqmap.c create mode 100644 arch/mips/alchemy/xxs1500/Makefile create mode 100644 arch/mips/alchemy/xxs1500/board_setup.c create mode 100644 arch/mips/alchemy/xxs1500/init.c create mode 100644 arch/mips/alchemy/xxs1500/irqmap.c delete mode 100644 arch/mips/au1000/Kconfig delete mode 100644 arch/mips/au1000/common/Makefile delete mode 100644 arch/mips/au1000/common/au1xxx_irqmap.c delete mode 100644 arch/mips/au1000/common/clocks.c delete mode 100644 arch/mips/au1000/common/cputable.c delete mode 100644 arch/mips/au1000/common/dbdma.c delete mode 100644 arch/mips/au1000/common/dma.c delete mode 100644 arch/mips/au1000/common/gpio.c delete mode 100644 arch/mips/au1000/common/irq.c delete mode 100644 arch/mips/au1000/common/pci.c delete mode 100644 arch/mips/au1000/common/platform.c delete mode 100644 arch/mips/au1000/common/power.c delete mode 100644 arch/mips/au1000/common/prom.c delete mode 100644 arch/mips/au1000/common/puts.c delete mode 100644 arch/mips/au1000/common/reset.c delete mode 100644 arch/mips/au1000/common/setup.c delete mode 100644 arch/mips/au1000/common/sleeper.S delete mode 100644 arch/mips/au1000/common/time.c delete mode 100644 arch/mips/au1000/db1x00/Makefile delete mode 100644 arch/mips/au1000/db1x00/board_setup.c delete mode 100644 arch/mips/au1000/db1x00/init.c delete mode 100644 arch/mips/au1000/db1x00/irqmap.c delete mode 100644 arch/mips/au1000/mtx-1/Makefile delete mode 100644 arch/mips/au1000/mtx-1/board_setup.c delete mode 100644 arch/mips/au1000/mtx-1/init.c delete mode 100644 arch/mips/au1000/mtx-1/irqmap.c delete mode 100644 arch/mips/au1000/mtx-1/platform.c delete mode 100644 arch/mips/au1000/pb1000/Makefile delete mode 100644 arch/mips/au1000/pb1000/board_setup.c delete mode 100644 arch/mips/au1000/pb1000/init.c delete mode 100644 arch/mips/au1000/pb1000/irqmap.c delete mode 100644 arch/mips/au1000/pb1100/Makefile delete mode 100644 arch/mips/au1000/pb1100/board_setup.c delete mode 100644 arch/mips/au1000/pb1100/init.c delete mode 100644 arch/mips/au1000/pb1100/irqmap.c delete mode 100644 arch/mips/au1000/pb1200/Makefile delete mode 100644 arch/mips/au1000/pb1200/board_setup.c delete mode 100644 arch/mips/au1000/pb1200/init.c delete mode 100644 arch/mips/au1000/pb1200/irqmap.c delete mode 100644 arch/mips/au1000/pb1200/platform.c delete mode 100644 arch/mips/au1000/pb1500/Makefile delete mode 100644 arch/mips/au1000/pb1500/board_setup.c delete mode 100644 arch/mips/au1000/pb1500/init.c delete mode 100644 arch/mips/au1000/pb1500/irqmap.c delete mode 100644 arch/mips/au1000/pb1550/Makefile delete mode 100644 arch/mips/au1000/pb1550/board_setup.c delete mode 100644 arch/mips/au1000/pb1550/init.c delete mode 100644 arch/mips/au1000/pb1550/irqmap.c delete mode 100644 arch/mips/au1000/xxs1500/Makefile delete mode 100644 arch/mips/au1000/xxs1500/board_setup.c delete mode 100644 arch/mips/au1000/xxs1500/init.c delete mode 100644 arch/mips/au1000/xxs1500/irqmap.c (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 00a23a118492..c15416c2e89d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -598,7 +598,7 @@ config WR_PPMC endchoice -source "arch/mips/au1000/Kconfig" +source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 87f67228e309..4401a0c1278c 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -176,103 +176,103 @@ load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 # # Common Alchemy Au1x00 stuff # -core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ +core-$(CONFIG_SOC_AU1X00) += arch/mips/alchemy/common/ cflags-$(CONFIG_SOC_AU1X00) += -Iinclude/asm-mips/mach-au1x00 # # AMD Alchemy Pb1000 eval board # -libs-$(CONFIG_MIPS_PB1000) += arch/mips/au1000/pb1000/ +libs-$(CONFIG_MIPS_PB1000) += arch/mips/alchemy/pb1000/ cflags-$(CONFIG_MIPS_PB1000) += -Iinclude/asm-mips/mach-pb1x00 load-$(CONFIG_MIPS_PB1000) += 0xffffffff80100000 # # AMD Alchemy Pb1100 eval board # -libs-$(CONFIG_MIPS_PB1100) += arch/mips/au1000/pb1100/ +libs-$(CONFIG_MIPS_PB1100) += arch/mips/alchemy/pb1100/ cflags-$(CONFIG_MIPS_PB1100) += -Iinclude/asm-mips/mach-pb1x00 load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000 # # AMD Alchemy Pb1500 eval board # -libs-$(CONFIG_MIPS_PB1500) += arch/mips/au1000/pb1500/ +libs-$(CONFIG_MIPS_PB1500) += arch/mips/alchemy/pb1500/ cflags-$(CONFIG_MIPS_PB1500) += -Iinclude/asm-mips/mach-pb1x00 load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000 # # AMD Alchemy Pb1550 eval board # -libs-$(CONFIG_MIPS_PB1550) += arch/mips/au1000/pb1550/ +libs-$(CONFIG_MIPS_PB1550) += arch/mips/alchemy/pb1550/ cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00 load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000 # # AMD Alchemy Pb1200 eval board # -libs-$(CONFIG_MIPS_PB1200) += arch/mips/au1000/pb1200/ +libs-$(CONFIG_MIPS_PB1200) += arch/mips/alchemy/pb1200/ cflags-$(CONFIG_MIPS_PB1200) += -Iinclude/asm-mips/mach-pb1x00 load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000 # # AMD Alchemy Db1000 eval board # -libs-$(CONFIG_MIPS_DB1000) += arch/mips/au1000/db1x00/ +libs-$(CONFIG_MIPS_DB1000) += arch/mips/alchemy/db1x00/ cflags-$(CONFIG_MIPS_DB1000) += -Iinclude/asm-mips/mach-db1x00 load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000 # # AMD Alchemy Db1100 eval board # -libs-$(CONFIG_MIPS_DB1100) += arch/mips/au1000/db1x00/ +libs-$(CONFIG_MIPS_DB1100) += arch/mips/alchemy/db1x00/ cflags-$(CONFIG_MIPS_DB1100) += -Iinclude/asm-mips/mach-db1x00 load-$(CONFIG_MIPS_DB1100) += 0xffffffff80100000 # # AMD Alchemy Db1500 eval board # -libs-$(CONFIG_MIPS_DB1500) += arch/mips/au1000/db1x00/ +libs-$(CONFIG_MIPS_DB1500) += arch/mips/alchemy/db1x00/ cflags-$(CONFIG_MIPS_DB1500) += -Iinclude/asm-mips/mach-db1x00 load-$(CONFIG_MIPS_DB1500) += 0xffffffff80100000 # # AMD Alchemy Db1550 eval board # -libs-$(CONFIG_MIPS_DB1550) += arch/mips/au1000/db1x00/ +libs-$(CONFIG_MIPS_DB1550) += arch/mips/alchemy/db1x00/ cflags-$(CONFIG_MIPS_DB1550) += -Iinclude/asm-mips/mach-db1x00 load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000 # # AMD Alchemy Db1200 eval board # -libs-$(CONFIG_MIPS_DB1200) += arch/mips/au1000/pb1200/ +libs-$(CONFIG_MIPS_DB1200) += arch/mips/alchemy/pb1200/ cflags-$(CONFIG_MIPS_DB1200) += -Iinclude/asm-mips/mach-db1x00 load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000 # # AMD Alchemy Bosporus eval board # -libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/au1000/db1x00/ +libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/alchemy/db1x00/ cflags-$(CONFIG_MIPS_BOSPORUS) += -Iinclude/asm-mips/mach-db1x00 load-$(CONFIG_MIPS_BOSPORUS) += 0xffffffff80100000 # # AMD Alchemy Mirage eval board # -libs-$(CONFIG_MIPS_MIRAGE) += arch/mips/au1000/db1x00/ +libs-$(CONFIG_MIPS_MIRAGE) += arch/mips/alchemy/db1x00/ cflags-$(CONFIG_MIPS_MIRAGE) += -Iinclude/asm-mips/mach-db1x00 load-$(CONFIG_MIPS_MIRAGE) += 0xffffffff80100000 # # 4G-Systems eval board # -libs-$(CONFIG_MIPS_MTX1) += arch/mips/au1000/mtx-1/ +libs-$(CONFIG_MIPS_MTX1) += arch/mips/alchemy/mtx-1/ load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000 # # MyCable eval board # -libs-$(CONFIG_MIPS_XXS1500) += arch/mips/au1000/xxs1500/ +libs-$(CONFIG_MIPS_XXS1500) += arch/mips/alchemy/xxs1500/ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 # diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig new file mode 100644 index 000000000000..e4a057d80ab6 --- /dev/null +++ b/arch/mips/alchemy/Kconfig @@ -0,0 +1,136 @@ +choice + prompt "Machine type" + depends on MACH_ALCHEMY + default MIPS_DB1000 + +config MIPS_MTX1 + bool "4G Systems MTX-1 board" + select DMA_NONCOHERENT + select HW_HAS_PCI + select SOC_AU1500 + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_BOSPORUS + bool "Alchemy Bosporus board" + select SOC_AU1500 + select DMA_NONCOHERENT + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1000 + bool "Alchemy DB1000 board" + select SOC_AU1000 + select DMA_NONCOHERENT + select HW_HAS_PCI + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1100 + bool "Alchemy DB1100 board" + select SOC_AU1100 + select DMA_NONCOHERENT + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1200 + bool "Alchemy DB1200 board" + select SOC_AU1200 + select DMA_COHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1500 + bool "Alchemy DB1500 board" + select SOC_AU1500 + select DMA_NONCOHERENT + select HW_HAS_PCI + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_DB1550 + bool "Alchemy DB1550 board" + select SOC_AU1550 + select HW_HAS_PCI + select DMA_NONCOHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_MIRAGE + bool "Alchemy Mirage board" + select DMA_NONCOHERENT + select SOC_AU1500 + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1000 + bool "Alchemy PB1000 board" + select SOC_AU1000 + select DMA_NONCOHERENT + select HW_HAS_PCI + select SWAP_IO_SPACE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1100 + bool "Alchemy PB1100 board" + select SOC_AU1100 + select DMA_NONCOHERENT + select HW_HAS_PCI + select SWAP_IO_SPACE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1200 + bool "Alchemy PB1200 board" + select SOC_AU1200 + select DMA_NONCOHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1500 + bool "Alchemy PB1500 board" + select SOC_AU1500 + select DMA_NONCOHERENT + select HW_HAS_PCI + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_PB1550 + bool "Alchemy PB1550 board" + select SOC_AU1550 + select DMA_NONCOHERENT + select HW_HAS_PCI + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN + +config MIPS_XXS1500 + bool "MyCable XXS1500 board" + select DMA_NONCOHERENT + select SOC_AU1500 + select SYS_SUPPORTS_LITTLE_ENDIAN + +endchoice + +config SOC_AU1000 + bool + select SOC_AU1X00 + +config SOC_AU1100 + bool + select SOC_AU1X00 + +config SOC_AU1500 + bool + select SOC_AU1X00 + +config SOC_AU1550 + bool + select SOC_AU1X00 + +config SOC_AU1200 + bool + select SOC_AU1X00 + +config SOC_AU1X00 + bool + select 64BIT_PHYS_ADDR + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_APM_EMULATION diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile new file mode 100644 index 000000000000..df48fd65bbf3 --- /dev/null +++ b/arch/mips/alchemy/common/Makefile @@ -0,0 +1,14 @@ +# +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# +# Makefile for the Alchemy Au1xx0 CPUs, generic files. +# + +obj-y += prom.o irq.o puts.o time.o reset.o \ + au1xxx_irqmap.o clocks.o platform.o power.o setup.o \ + sleeper.o cputable.o dma.o dbdma.o gpio.o + +obj-$(CONFIG_PCI) += pci.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/common/au1xxx_irqmap.c b/arch/mips/alchemy/common/au1xxx_irqmap.c new file mode 100644 index 000000000000..c7ca1596394c --- /dev/null +++ b/arch/mips/alchemy/common/au1xxx_irqmap.c @@ -0,0 +1,205 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx processor specific IRQ tables + * + * Copyright 2004 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include + +#include + +/* The IC0 interrupt table. This is processor, rather than + * board dependent, so no reason to keep this info in the board + * dependent files. + * + * Careful if you change match 2 request! + * The interrupt handler is called directly from the low level dispatch code. + */ +struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = { + +#if defined(CONFIG_SOC_AU1000) + { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 }, + +#elif defined(CONFIG_SOC_AU1500) + + { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 }, + +#elif defined(CONFIG_SOC_AU1100) + + { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + /* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */ + { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 }, + +#elif defined(CONFIG_SOC_AU1550) + + { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 }, + { AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 }, + { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 }, + { AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 }, + { AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 }, + { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, + { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + +#elif defined(CONFIG_SOC_AU1200) + + { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 }, + +#else +#error "Error: Unknown Alchemy SOC" +#endif + +}; + +int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map); diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c new file mode 100644 index 000000000000..043429d17c5f --- /dev/null +++ b/arch/mips/alchemy/common/clocks.c @@ -0,0 +1,93 @@ +/* + * BRIEF MODULE DESCRIPTION + * Simple Au1xx0 clocks routines. + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +static unsigned int au1x00_clock; /* Hz */ +static unsigned int lcd_clock; /* KHz */ +static unsigned long uart_baud_base; + +/* + * Set the au1000_clock + */ +void set_au1x00_speed(unsigned int new_freq) +{ + au1x00_clock = new_freq; +} + +unsigned int get_au1x00_speed(void) +{ + return au1x00_clock; +} +EXPORT_SYMBOL(get_au1x00_speed); + +/* + * The UART baud base is not known at compile time ... if + * we want to be able to use the same code on different + * speed CPUs. + */ +unsigned long get_au1x00_uart_baud_base(void) +{ + return uart_baud_base; +} + +void set_au1x00_uart_baud_base(unsigned long new_baud_base) +{ + uart_baud_base = new_baud_base; +} + +/* + * Calculate the Au1x00's LCD clock based on the current + * cpu clock and the system bus clock, and try to keep it + * below 40 MHz (the Pb1000 board can lock-up if the LCD + * clock is over 40 MHz). + */ +void set_au1x00_lcd_clock(void) +{ + unsigned int static_cfg0; + unsigned int sys_busclk = (get_au1x00_speed() / 1000) / + ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2); + + static_cfg0 = au_readl(MEM_STCFG0); + + if (static_cfg0 & (1 << 11)) + lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */ + else + lcd_clock = sys_busclk / 4; + + if (lcd_clock > 50000) /* Epson MAX */ + printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n", + lcd_clock); +} + +unsigned int get_au1x00_lcd_clock(void) +{ + return lcd_clock; +} +EXPORT_SYMBOL(get_au1x00_lcd_clock); diff --git a/arch/mips/alchemy/common/cputable.c b/arch/mips/alchemy/common/cputable.c new file mode 100644 index 000000000000..ba6430bc2d03 --- /dev/null +++ b/arch/mips/alchemy/common/cputable.c @@ -0,0 +1,52 @@ +/* + * arch/mips/au1000/common/cputable.c + * + * Copyright (C) 2004 Dan Malek (dan@embeddededge.com) + * Copied from PowerPC and updated for Alchemy Au1xxx processors. + * + * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +struct cpu_spec *cur_cpu_spec[NR_CPUS]; + +/* With some thought, we can probably use the mask to reduce the + * size of the table. + */ +struct cpu_spec cpu_specs[] = { + { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 }, + { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 }, + { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 }, + { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 }, + { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 }, + { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 }, + { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 }, + { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 }, + { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 }, + { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 }, + { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 }, + { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 }, + { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 }, + { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 }, + { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 }, + { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 }, + { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 } +}; + +void set_cpuspec(void) +{ + struct cpu_spec *sp; + u32 prid; + + prid = read_c0_prid(); + sp = cpu_specs; + while ((prid & sp->prid_mask) != sp->prid_value) + sp++; + cur_cpu_spec[0] = sp; +} diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c new file mode 100644 index 000000000000..601ee9180ee4 --- /dev/null +++ b/arch/mips/alchemy/common/dbdma.c @@ -0,0 +1,978 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * The Descriptor Based DMA channel manager that first appeared + * on the Au1550. I started with dma.c, but I think all that is + * left is this initial comment :-) + * + * Copyright 2004 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) + +/* + * The Descriptor Based DMA supports up to 16 channels. + * + * There are 32 devices defined. We keep an internal structure + * of devices using these channels, along with additional + * information. + * + * We allocate the descriptors and allow access to them through various + * functions. The drivers allocate the data buffers and assign them + * to the descriptors. + */ +static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); + +/* I couldn't find a macro that did this... */ +#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1)) + +static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; +static int dbdma_initialized; +static void au1xxx_dbdma_init(void); + +static dbdev_tab_t dbdev_tab[] = { +#ifdef CONFIG_SOC_AU1550 + /* UARTS */ + { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, + { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, + { DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 }, + { DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 }, + + /* EXT DMA */ + { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 }, + + /* USB DEV */ + { DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 }, + { DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 }, + { DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 }, + { DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 }, + { DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 }, + { DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 }, + + /* PSC 0 */ + { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 }, + { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 }, + + /* PSC 1 */ + { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 }, + { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 }, + + /* PSC 2 */ + { DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 }, + { DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 }, + + /* PSC 3 */ + { DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 }, + { DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 }, + + { DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */ + { DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */ + + /* MAC 0 */ + { DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, + + /* MAC 1 */ + { DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, + +#endif /* CONFIG_SOC_AU1550 */ + +#ifdef CONFIG_SOC_AU1200 + { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, + { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, + { DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 }, + { DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 }, + + { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, + { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, + { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 }, + { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 }, + + { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, + { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, + + { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 }, + { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 }, + { DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 }, + { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 }, + { DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 }, + { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 }, + { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 }, + { DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + +#endif /* CONFIG_SOC_AU1200 */ + + { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + /* Provide 16 user definable device types */ + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, + { ~0, 0, 0, 0, 0, 0, 0 }, +}; + +#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab) + +static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS]; + +static dbdev_tab_t *find_dbdev_id(u32 id) +{ + int i; + dbdev_tab_t *p; + for (i = 0; i < DBDEV_TAB_SIZE; ++i) { + p = &dbdev_tab[i]; + if (p->dev_id == id) + return p; + } + return NULL; +} + +void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp) +{ + return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); +} +EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt); + +u32 au1xxx_ddma_add_device(dbdev_tab_t *dev) +{ + u32 ret = 0; + dbdev_tab_t *p; + static u16 new_id = 0x1000; + + p = find_dbdev_id(~0); + if (NULL != p) { + memcpy(p, dev, sizeof(dbdev_tab_t)); + p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id); + ret = p->dev_id; + new_id++; +#if 0 + printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n", + p->dev_id, p->dev_flags, p->dev_physaddr); +#endif + } + + return ret; +} +EXPORT_SYMBOL(au1xxx_ddma_add_device); + +void au1xxx_ddma_del_device(u32 devid) +{ + dbdev_tab_t *p = find_dbdev_id(devid); + + if (p != NULL) { + memset(p, 0, sizeof(dbdev_tab_t)); + p->dev_id = ~0; + } +} +EXPORT_SYMBOL(au1xxx_ddma_del_device); + +/* Allocate a channel and return a non-zero descriptor if successful. */ +u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, + void (*callback)(int, void *), void *callparam) +{ + unsigned long flags; + u32 used, chan, rv; + u32 dcp; + int i; + dbdev_tab_t *stp, *dtp; + chan_tab_t *ctp; + au1x_dma_chan_t *cp; + + /* + * We do the intialization on the first channel allocation. + * We have to wait because of the interrupt handler initialization + * which can't be done successfully during board set up. + */ + if (!dbdma_initialized) + au1xxx_dbdma_init(); + dbdma_initialized = 1; + + stp = find_dbdev_id(srcid); + if (stp == NULL) + return 0; + dtp = find_dbdev_id(destid); + if (dtp == NULL) + return 0; + + used = 0; + rv = 0; + + /* Check to see if we can get both channels. */ + spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); + if (!(stp->dev_flags & DEV_FLAGS_INUSE) || + (stp->dev_flags & DEV_FLAGS_ANYUSE)) { + /* Got source */ + stp->dev_flags |= DEV_FLAGS_INUSE; + if (!(dtp->dev_flags & DEV_FLAGS_INUSE) || + (dtp->dev_flags & DEV_FLAGS_ANYUSE)) { + /* Got destination */ + dtp->dev_flags |= DEV_FLAGS_INUSE; + } else { + /* Can't get dest. Release src. */ + stp->dev_flags &= ~DEV_FLAGS_INUSE; + used++; + } + } else + used++; + spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); + + if (!used) { + /* Let's see if we can allocate a channel for it. */ + ctp = NULL; + chan = 0; + spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); + for (i = 0; i < NUM_DBDMA_CHANS; i++) + if (chan_tab_ptr[i] == NULL) { + /* + * If kmalloc fails, it is caught below same + * as a channel not available. + */ + ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC); + chan_tab_ptr[i] = ctp; + break; + } + spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); + + if (ctp != NULL) { + memset(ctp, 0, sizeof(chan_tab_t)); + ctp->chan_index = chan = i; + dcp = DDMA_CHANNEL_BASE; + dcp += (0x0100 * chan); + ctp->chan_ptr = (au1x_dma_chan_t *)dcp; + cp = (au1x_dma_chan_t *)dcp; + ctp->chan_src = stp; + ctp->chan_dest = dtp; + ctp->chan_callback = callback; + ctp->chan_callparam = callparam; + + /* Initialize channel configuration. */ + i = 0; + if (stp->dev_intlevel) + i |= DDMA_CFG_SED; + if (stp->dev_intpolarity) + i |= DDMA_CFG_SP; + if (dtp->dev_intlevel) + i |= DDMA_CFG_DED; + if (dtp->dev_intpolarity) + i |= DDMA_CFG_DP; + if ((stp->dev_flags & DEV_FLAGS_SYNC) || + (dtp->dev_flags & DEV_FLAGS_SYNC)) + i |= DDMA_CFG_SYNC; + cp->ddma_cfg = i; + au_sync(); + + /* Return a non-zero value that can be used to + * find the channel information in subsequent + * operations. + */ + rv = (u32)(&chan_tab_ptr[chan]); + } else { + /* Release devices */ + stp->dev_flags &= ~DEV_FLAGS_INUSE; + dtp->dev_flags &= ~DEV_FLAGS_INUSE; + } + } + return rv; +} +EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc); + +/* + * Set the device width if source or destination is a FIFO. + * Should be 8, 16, or 32 bits. + */ +u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits) +{ + u32 rv; + chan_tab_t *ctp; + dbdev_tab_t *stp, *dtp; + + ctp = *((chan_tab_t **)chanid); + stp = ctp->chan_src; + dtp = ctp->chan_dest; + rv = 0; + + if (stp->dev_flags & DEV_FLAGS_IN) { /* Source in fifo */ + rv = stp->dev_devwidth; + stp->dev_devwidth = bits; + } + if (dtp->dev_flags & DEV_FLAGS_OUT) { /* Destination out fifo */ + rv = dtp->dev_devwidth; + dtp->dev_devwidth = bits; + } + + return rv; +} +EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth); + +/* Allocate a descriptor ring, initializing as much as possible. */ +u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries) +{ + int i; + u32 desc_base, srcid, destid; + u32 cmd0, cmd1, src1, dest1; + u32 src0, dest0; + chan_tab_t *ctp; + dbdev_tab_t *stp, *dtp; + au1x_ddma_desc_t *dp; + + /* + * I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + stp = ctp->chan_src; + dtp = ctp->chan_dest; + + /* + * The descriptors must be 32-byte aligned. There is a + * possibility the allocation will give us such an address, + * and if we try that first we are likely to not waste larger + * slabs of memory. + */ + desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), + GFP_KERNEL|GFP_DMA); + if (desc_base == 0) + return 0; + + if (desc_base & 0x1f) { + /* + * Lost....do it again, allocate extra, and round + * the address base. + */ + kfree((const void *)desc_base); + i = entries * sizeof(au1x_ddma_desc_t); + i += (sizeof(au1x_ddma_desc_t) - 1); + desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA); + if (desc_base == 0) + return 0; + + desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t)); + } + dp = (au1x_ddma_desc_t *)desc_base; + + /* Keep track of the base descriptor. */ + ctp->chan_desc_base = dp; + + /* Initialize the rings with as much information as we know. */ + srcid = stp->dev_id; + destid = dtp->dev_id; + + cmd0 = cmd1 = src1 = dest1 = 0; + src0 = dest0 = 0; + + cmd0 |= DSCR_CMD0_SID(srcid); + cmd0 |= DSCR_CMD0_DID(destid); + cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV; + cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE); + + /* Is it mem to mem transfer? */ + if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || + (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) && + ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || + (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) + cmd0 |= DSCR_CMD0_MEM; + + switch (stp->dev_devwidth) { + case 8: + cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_BYTE); + break; + case 16: + cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_HALFWORD); + break; + case 32: + default: + cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_WORD); + break; + } + + switch (dtp->dev_devwidth) { + case 8: + cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_BYTE); + break; + case 16: + cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_HALFWORD); + break; + case 32: + default: + cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_WORD); + break; + } + + /* + * If the device is marked as an in/out FIFO, ensure it is + * set non-coherent. + */ + if (stp->dev_flags & DEV_FLAGS_IN) + cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */ + if (dtp->dev_flags & DEV_FLAGS_OUT) + cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */ + + /* + * Set up source1. For now, assume no stride and increment. + * A channel attribute update can change this later. + */ + switch (stp->dev_tsize) { + case 1: + src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE1); + break; + case 2: + src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE2); + break; + case 4: + src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE4); + break; + case 8: + default: + src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE8); + break; + } + + /* If source input is FIFO, set static address. */ + if (stp->dev_flags & DEV_FLAGS_IN) { + if (stp->dev_flags & DEV_FLAGS_BURSTABLE) + src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST); + else + src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC); + } + + if (stp->dev_physaddr) + src0 = stp->dev_physaddr; + + /* + * Set up dest1. For now, assume no stride and increment. + * A channel attribute update can change this later. + */ + switch (dtp->dev_tsize) { + case 1: + dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE1); + break; + case 2: + dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE2); + break; + case 4: + dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE4); + break; + case 8: + default: + dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE8); + break; + } + + /* If destination output is FIFO, set static address. */ + if (dtp->dev_flags & DEV_FLAGS_OUT) { + if (dtp->dev_flags & DEV_FLAGS_BURSTABLE) + dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST); + else + dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC); + } + + if (dtp->dev_physaddr) + dest0 = dtp->dev_physaddr; + +#if 0 + printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x " + "source1:%x dest0:%x dest1:%x\n", + dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, + src1, dest0, dest1); +#endif + for (i = 0; i < entries; i++) { + dp->dscr_cmd0 = cmd0; + dp->dscr_cmd1 = cmd1; + dp->dscr_source0 = src0; + dp->dscr_source1 = src1; + dp->dscr_dest0 = dest0; + dp->dscr_dest1 = dest1; + dp->dscr_stat = 0; + dp->sw_context = 0; + dp->sw_status = 0; + dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1)); + dp++; + } + + /* Make last descrptor point to the first. */ + dp--; + dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base)); + ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base; + + return (u32)ctp->chan_desc_base; +} +EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); + +/* + * Put a source buffer into the DMA ring. + * This updates the source pointer and byte count. Normally used + * for memory to fifo transfers. + */ +u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + + /* + * I guess we could check this to be within the + * range of the table...... + */ + ctp = *(chan_tab_t **)chanid; + + /* + * We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->put_ptr; + + /* + * If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Load up buffer address and byte count. */ + dp->dscr_source0 = virt_to_phys(buf); + dp->dscr_cmd1 = nbytes; + /* Check flags */ + if (flags & DDMA_FLAGS_IE) + dp->dscr_cmd0 |= DSCR_CMD0_IE; + if (flags & DDMA_FLAGS_NOIE) + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + + /* + * There is an errata on the Au1200/Au1550 parts that could result + * in "stale" data being DMA'ed. It has to do with the snoop logic on + * the cache eviction buffer. DMA_NONCOHERENT is on by default for + * these parts. If it is fixed in the future, these dma_cache_inv will + * just be nothing more than empty macros. See io.h. + */ + dma_cache_wback_inv((unsigned long)buf, nbytes); + dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ + au_sync(); + dma_cache_wback_inv((unsigned long)dp, sizeof(dp)); + ctp->chan_ptr->ddma_dbell = 0; + + /* Get next descriptor pointer. */ + ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* Return something non-zero. */ + return nbytes; +} +EXPORT_SYMBOL(_au1xxx_dbdma_put_source); + +/* Put a destination buffer into the DMA ring. + * This updates the destination pointer and byte count. Normally used + * to place an empty buffer into the ring for fifo to memory transfers. + */ +u32 +_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + + /* I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + + /* We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->put_ptr; + + /* If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Load up buffer address and byte count */ + + /* Check flags */ + if (flags & DDMA_FLAGS_IE) + dp->dscr_cmd0 |= DSCR_CMD0_IE; + if (flags & DDMA_FLAGS_NOIE) + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + + dp->dscr_dest0 = virt_to_phys(buf); + dp->dscr_cmd1 = nbytes; +#if 0 + printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", + dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0, + dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); +#endif + /* + * There is an errata on the Au1200/Au1550 parts that could result in + * "stale" data being DMA'ed. It has to do with the snoop logic on the + * cache eviction buffer. DMA_NONCOHERENT is on by default for these + * parts. If it is fixed in the future, these dma_cache_inv will just + * be nothing more than empty macros. See io.h. + */ + dma_cache_inv((unsigned long)buf, nbytes); + dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ + au_sync(); + dma_cache_wback_inv((unsigned long)dp, sizeof(dp)); + ctp->chan_ptr->ddma_dbell = 0; + + /* Get next descriptor pointer. */ + ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* Return something non-zero. */ + return nbytes; +} +EXPORT_SYMBOL(_au1xxx_dbdma_put_dest); + +/* + * Get a destination buffer into the DMA ring. + * Normally used to get a full buffer from the ring during fifo + * to memory transfers. This does not set the valid bit, you will + * have to put another destination buffer to keep the DMA going. + */ +u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + u32 rv; + + /* + * I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + + /* + * We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->get_ptr; + + /* + * If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Return buffer address and byte count. */ + *buf = (void *)(phys_to_virt(dp->dscr_dest0)); + *nbytes = dp->dscr_cmd1; + rv = dp->dscr_stat; + + /* Get next descriptor pointer. */ + ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* Return something non-zero. */ + return rv; +} +EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest); + +void au1xxx_dbdma_stop(u32 chanid) +{ + chan_tab_t *ctp; + au1x_dma_chan_t *cp; + int halt_timeout = 0; + + ctp = *((chan_tab_t **)chanid); + + cp = ctp->chan_ptr; + cp->ddma_cfg &= ~DDMA_CFG_EN; /* Disable channel */ + au_sync(); + while (!(cp->ddma_stat & DDMA_STAT_H)) { + udelay(1); + halt_timeout++; + if (halt_timeout > 100) { + printk(KERN_WARNING "warning: DMA channel won't halt\n"); + break; + } + } + /* clear current desc valid and doorbell */ + cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V); + au_sync(); +} +EXPORT_SYMBOL(au1xxx_dbdma_stop); + +/* + * Start using the current descriptor pointer. If the DBDMA encounters + * a non-valid descriptor, it will stop. In this case, we can just + * continue by adding a buffer to the list and starting again. + */ +void au1xxx_dbdma_start(u32 chanid) +{ + chan_tab_t *ctp; + au1x_dma_chan_t *cp; + + ctp = *((chan_tab_t **)chanid); + cp = ctp->chan_ptr; + cp->ddma_desptr = virt_to_phys(ctp->cur_ptr); + cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */ + au_sync(); + cp->ddma_dbell = 0; + au_sync(); +} +EXPORT_SYMBOL(au1xxx_dbdma_start); + +void au1xxx_dbdma_reset(u32 chanid) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + + au1xxx_dbdma_stop(chanid); + + ctp = *((chan_tab_t **)chanid); + ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base; + + /* Run through the descriptors and reset the valid indicator. */ + dp = ctp->chan_desc_base; + + do { + dp->dscr_cmd0 &= ~DSCR_CMD0_V; + /* + * Reset our software status -- this is used to determine + * if a descriptor is in use by upper level software. Since + * posting can reset 'V' bit. + */ + dp->sw_status = 0; + dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + } while (dp != ctp->chan_desc_base); +} +EXPORT_SYMBOL(au1xxx_dbdma_reset); + +u32 au1xxx_get_dma_residue(u32 chanid) +{ + chan_tab_t *ctp; + au1x_dma_chan_t *cp; + u32 rv; + + ctp = *((chan_tab_t **)chanid); + cp = ctp->chan_ptr; + + /* This is only valid if the channel is stopped. */ + rv = cp->ddma_bytecnt; + au_sync(); + + return rv; +} +EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue); + +void au1xxx_dbdma_chan_free(u32 chanid) +{ + chan_tab_t *ctp; + dbdev_tab_t *stp, *dtp; + + ctp = *((chan_tab_t **)chanid); + stp = ctp->chan_src; + dtp = ctp->chan_dest; + + au1xxx_dbdma_stop(chanid); + + kfree((void *)ctp->chan_desc_base); + + stp->dev_flags &= ~DEV_FLAGS_INUSE; + dtp->dev_flags &= ~DEV_FLAGS_INUSE; + chan_tab_ptr[ctp->chan_index] = NULL; + + kfree(ctp); +} +EXPORT_SYMBOL(au1xxx_dbdma_chan_free); + +static irqreturn_t dbdma_interrupt(int irq, void *dev_id) +{ + u32 intstat; + u32 chan_index; + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + au1x_dma_chan_t *cp; + + intstat = dbdma_gptr->ddma_intstat; + au_sync(); + chan_index = __ffs(intstat); + + ctp = chan_tab_ptr[chan_index]; + cp = ctp->chan_ptr; + dp = ctp->cur_ptr; + + /* Reset interrupt. */ + cp->ddma_irq = 0; + au_sync(); + + if (ctp->chan_callback) + ctp->chan_callback(irq, ctp->chan_callparam); + + ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + return IRQ_RETVAL(1); +} + +static void au1xxx_dbdma_init(void) +{ + int irq_nr; + + dbdma_gptr->ddma_config = 0; + dbdma_gptr->ddma_throttle = 0; + dbdma_gptr->ddma_inten = 0xffff; + au_sync(); + +#if defined(CONFIG_SOC_AU1550) + irq_nr = AU1550_DDMA_INT; +#elif defined(CONFIG_SOC_AU1200) + irq_nr = AU1200_DDMA_INT; +#else + #error Unknown Au1x00 SOC +#endif + + if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED, + "Au1xxx dbdma", (void *)dbdma_gptr)) + printk(KERN_ERR "Can't get 1550 dbdma irq"); +} + +void au1xxx_dbdma_dump(u32 chanid) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + dbdev_tab_t *stp, *dtp; + au1x_dma_chan_t *cp; + u32 i = 0; + + ctp = *((chan_tab_t **)chanid); + stp = ctp->chan_src; + dtp = ctp->chan_dest; + cp = ctp->chan_ptr; + + printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n", + (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, + dtp - dbdev_tab); + printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n", + (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr), + (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr)); + + printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp); + printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n", + cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr); + printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n", + cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat, + cp->ddma_bytecnt); + + /* Run through the descriptors */ + dp = ctp->chan_desc_base; + + do { + printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n", + i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); + printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n", + dp->dscr_source0, dp->dscr_source1, + dp->dscr_dest0, dp->dscr_dest1); + printk(KERN_DEBUG "stat %08x, nxtptr %08x\n", + dp->dscr_stat, dp->dscr_nxtptr); + dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + } while (dp != ctp->chan_desc_base); +} + +/* Put a descriptor into the DMA ring. + * This updates the source/destination pointers and byte count. + */ +u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + u32 nbytes = 0; + + /* + * I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + + /* + * We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->put_ptr; + + /* + * If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Load up buffer addresses and byte count. */ + dp->dscr_dest0 = dscr->dscr_dest0; + dp->dscr_source0 = dscr->dscr_source0; + dp->dscr_dest1 = dscr->dscr_dest1; + dp->dscr_source1 = dscr->dscr_source1; + dp->dscr_cmd1 = dscr->dscr_cmd1; + nbytes = dscr->dscr_cmd1; + /* Allow the caller to specifiy if an interrupt is generated */ + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V; + ctp->chan_ptr->ddma_dbell = 0; + + /* Get next descriptor pointer. */ + ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* Return something non-zero. */ + return nbytes; +} + +#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */ diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c new file mode 100644 index 000000000000..d6fbda232e6a --- /dev/null +++ b/arch/mips/alchemy/common/dma.c @@ -0,0 +1,238 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * A DMA channel allocator for Au1x00. API is modeled loosely off of + * linux/kernel/dma.c. + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include +#include +#include +#include +#include + +#include +#include + +#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \ + defined(CONFIG_SOC_AU1100) +/* + * A note on resource allocation: + * + * All drivers needing DMA channels, should allocate and release them + * through the public routines `request_dma()' and `free_dma()'. + * + * In order to avoid problems, all processes should allocate resources in + * the same sequence and release them in the reverse order. + * + * So, when allocating DMAs and IRQs, first allocate the DMA, then the IRQ. + * When releasing them, first release the IRQ, then release the DMA. The + * main reason for this order is that, if you are requesting the DMA buffer + * done interrupt, you won't know the irq number until the DMA channel is + * returned from request_dma. + */ + +DEFINE_SPINLOCK(au1000_dma_spin_lock); + +struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = { + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,}, + {.dev_id = -1,} +}; +EXPORT_SYMBOL(au1000_dma_table); + +/* Device FIFO addresses and default DMA modes */ +static const struct dma_dev { + unsigned int fifo_addr; + unsigned int dma_mode; +} dma_dev_table[DMA_NUM_DEV] = { + {UART0_ADDR + UART_TX, 0}, + {UART0_ADDR + UART_RX, 0}, + {0, 0}, + {0, 0}, + {AC97C_DATA, DMA_DW16 }, /* coherent */ + {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */ + {UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC}, + {UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC}, + {USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC}, + {USBD_EP0WR, DMA_DW8 | DMA_NC}, + {USBD_EP2WR, DMA_DW8 | DMA_NC}, + {USBD_EP3WR, DMA_DW8 | DMA_NC}, + {USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC}, + {USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC}, + {I2S_DATA, DMA_DW32 | DMA_NC}, + {I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC} +}; + +int au1000_dma_read_proc(char *buf, char **start, off_t fpos, + int length, int *eof, void *data) +{ + int i, len = 0; + struct dma_chan *chan; + + for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) { + chan = get_dma_chan(i); + if (chan != NULL) + len += sprintf(buf + len, "%2d: %s\n", + i, chan->dev_str); + } + + if (fpos >= len) { + *start = buf; + *eof = 1; + return 0; + } + *start = buf + fpos; + len -= fpos; + if (len > length) + return length; + *eof = 1; + return len; +} + +/* Device FIFO addresses and default DMA modes - 2nd bank */ +static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = { + { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ + { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */ + { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ + { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */ +}; + +void dump_au1000_dma_channel(unsigned int dmanr) +{ + struct dma_chan *chan; + + if (dmanr >= NUM_AU1000_DMA_CHANNELS) + return; + chan = &au1000_dma_table[dmanr]; + + printk(KERN_INFO "Au1000 DMA%d Register Dump:\n", dmanr); + printk(KERN_INFO " mode = 0x%08x\n", + au_readl(chan->io + DMA_MODE_SET)); + printk(KERN_INFO " addr = 0x%08x\n", + au_readl(chan->io + DMA_PERIPHERAL_ADDR)); + printk(KERN_INFO " start0 = 0x%08x\n", + au_readl(chan->io + DMA_BUFFER0_START)); + printk(KERN_INFO " start1 = 0x%08x\n", + au_readl(chan->io + DMA_BUFFER1_START)); + printk(KERN_INFO " count0 = 0x%08x\n", + au_readl(chan->io + DMA_BUFFER0_COUNT)); + printk(KERN_INFO " count1 = 0x%08x\n", + au_readl(chan->io + DMA_BUFFER1_COUNT)); +} + +/* + * Finds a free channel, and binds the requested device to it. + * Returns the allocated channel number, or negative on error. + * Requests the DMA done IRQ if irqhandler != NULL. + */ +int request_au1000_dma(int dev_id, const char *dev_str, + irq_handler_t irqhandler, + unsigned long irqflags, + void *irq_dev_id) +{ + struct dma_chan *chan; + const struct dma_dev *dev; + int i, ret; + +#if defined(CONFIG_SOC_AU1100) + if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2)) + return -EINVAL; +#else + if (dev_id < 0 || dev_id >= DMA_NUM_DEV) + return -EINVAL; +#endif + + for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) + if (au1000_dma_table[i].dev_id < 0) + break; + + if (i == NUM_AU1000_DMA_CHANNELS) + return -ENODEV; + + chan = &au1000_dma_table[i]; + + if (dev_id >= DMA_NUM_DEV) { + dev_id -= DMA_NUM_DEV; + dev = &dma_dev_table_bank2[dev_id]; + } else + dev = &dma_dev_table[dev_id]; + + if (irqhandler) { + chan->irq = AU1000_DMA_INT_BASE + i; + chan->irq_dev = irq_dev_id; + ret = request_irq(chan->irq, irqhandler, irqflags, dev_str, + chan->irq_dev); + if (ret) { + chan->irq = 0; + chan->irq_dev = NULL; + return ret; + } + } else { + chan->irq = 0; + chan->irq_dev = NULL; + } + + /* fill it in */ + chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN; + chan->dev_id = dev_id; + chan->dev_str = dev_str; + chan->fifo_addr = dev->fifo_addr; + chan->mode = dev->dma_mode; + + /* initialize the channel before returning */ + init_dma(i); + + return i; +} +EXPORT_SYMBOL(request_au1000_dma); + +void free_au1000_dma(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) { + printk(KERN_ERR "Error trying to free DMA%d\n", dmanr); + return; + } + + disable_dma(dmanr); + if (chan->irq) + free_irq(chan->irq, chan->irq_dev); + + chan->irq = 0; + chan->irq_dev = NULL; + chan->dev_id = -1; +} +EXPORT_SYMBOL(free_au1000_dma); + +#endif /* AU1000 AU1500 AU1100 */ diff --git a/arch/mips/alchemy/common/gpio.c b/arch/mips/alchemy/common/gpio.c new file mode 100644 index 000000000000..e660ddd611c4 --- /dev/null +++ b/arch/mips/alchemy/common/gpio.c @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2007, OpenWrt.org, Florian Fainelli + * Architecture specific GPIO support + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Notes : + * au1000 SoC have only one GPIO line : GPIO1 + * others have a second one : GPIO2 + */ + +#include + +#include +#include + +#define gpio1 sys +#if !defined(CONFIG_SOC_AU1000) + +static struct au1x00_gpio2 *const gpio2 = (struct au1x00_gpio2 *) GPIO2_BASE; +#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 + +static int au1xxx_gpio2_read(unsigned gpio) +{ + gpio -= AU1XXX_GPIO_BASE; + return ((gpio2->pinstate >> gpio) & 0x01); +} + +static void au1xxx_gpio2_write(unsigned gpio, int value) +{ + gpio -= AU1XXX_GPIO_BASE; + + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); +} + +static int au1xxx_gpio2_direction_input(unsigned gpio) +{ + gpio -= AU1XXX_GPIO_BASE; + gpio2->dir &= ~(0x01 << gpio); + return 0; +} + +static int au1xxx_gpio2_direction_output(unsigned gpio, int value) +{ + gpio -= AU1XXX_GPIO_BASE; + gpio2->dir |= 0x01 << gpio; + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); + return 0; +} + +#endif /* !defined(CONFIG_SOC_AU1000) */ + +static int au1xxx_gpio1_read(unsigned gpio) +{ + return (gpio1->pinstaterd >> gpio) & 0x01; +} + +static void au1xxx_gpio1_write(unsigned gpio, int value) +{ + if (value) + gpio1->outputset = (0x01 << gpio); + else + /* Output a zero */ + gpio1->outputclr = (0x01 << gpio); +} + +static int au1xxx_gpio1_direction_input(unsigned gpio) +{ + gpio1->pininputen = (0x01 << gpio); + return 0; +} + +static int au1xxx_gpio1_direction_output(unsigned gpio, int value) +{ + gpio1->trioutclr = (0x01 & gpio); + au1xxx_gpio1_write(gpio, value); + return 0; +} + +int au1xxx_gpio_get_value(unsigned gpio) +{ + if (gpio >= AU1XXX_GPIO_BASE) +#if defined(CONFIG_SOC_AU1000) + return 0; +#else + return au1xxx_gpio2_read(gpio); +#endif + else + return au1xxx_gpio1_read(gpio); +} +EXPORT_SYMBOL(au1xxx_gpio_get_value); + +void au1xxx_gpio_set_value(unsigned gpio, int value) +{ + if (gpio >= AU1XXX_GPIO_BASE) +#if defined(CONFIG_SOC_AU1000) + ; +#else + au1xxx_gpio2_write(gpio, value); +#endif + else + au1xxx_gpio1_write(gpio, value); +} +EXPORT_SYMBOL(au1xxx_gpio_set_value); + +int au1xxx_gpio_direction_input(unsigned gpio) +{ + if (gpio >= AU1XXX_GPIO_BASE) +#if defined(CONFIG_SOC_AU1000) + return -ENODEV; +#else + return au1xxx_gpio2_direction_input(gpio); +#endif + + return au1xxx_gpio1_direction_input(gpio); +} +EXPORT_SYMBOL(au1xxx_gpio_direction_input); + +int au1xxx_gpio_direction_output(unsigned gpio, int value) +{ + if (gpio >= AU1XXX_GPIO_BASE) +#if defined(CONFIG_SOC_AU1000) + return -ENODEV; +#else + return au1xxx_gpio2_direction_output(gpio, value); +#endif + + return au1xxx_gpio1_direction_output(gpio, value); +} +EXPORT_SYMBOL(au1xxx_gpio_direction_output); diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c new file mode 100644 index 000000000000..40c6ceceb5f9 --- /dev/null +++ b/arch/mips/alchemy/common/irq.c @@ -0,0 +1,596 @@ +/* + * Copyright 2001, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include + +#include +#include +#include +#ifdef CONFIG_MIPS_PB1000 +#include +#endif + +#define EXT_INTC0_REQ0 2 /* IP 2 */ +#define EXT_INTC0_REQ1 3 /* IP 3 */ +#define EXT_INTC1_REQ0 4 /* IP 4 */ +#define EXT_INTC1_REQ1 5 /* IP 5 */ +#define MIPS_TIMER_IP 7 /* IP 7 */ + +void (*board_init_irq)(void) __initdata = NULL; + +static DEFINE_SPINLOCK(irq_lock); + +#ifdef CONFIG_PM + +/* + * Save/restore the interrupt controller state. + * Called from the save/restore core registers as part of the + * au_sleep function in power.c.....maybe I should just pm_register() + * them instead? + */ +static unsigned int sleep_intctl_config0[2]; +static unsigned int sleep_intctl_config1[2]; +static unsigned int sleep_intctl_config2[2]; +static unsigned int sleep_intctl_src[2]; +static unsigned int sleep_intctl_assign[2]; +static unsigned int sleep_intctl_wake[2]; +static unsigned int sleep_intctl_mask[2]; + +void save_au1xxx_intctl(void) +{ + sleep_intctl_config0[0] = au_readl(IC0_CFG0RD); + sleep_intctl_config1[0] = au_readl(IC0_CFG1RD); + sleep_intctl_config2[0] = au_readl(IC0_CFG2RD); + sleep_intctl_src[0] = au_readl(IC0_SRCRD); + sleep_intctl_assign[0] = au_readl(IC0_ASSIGNRD); + sleep_intctl_wake[0] = au_readl(IC0_WAKERD); + sleep_intctl_mask[0] = au_readl(IC0_MASKRD); + + sleep_intctl_config0[1] = au_readl(IC1_CFG0RD); + sleep_intctl_config1[1] = au_readl(IC1_CFG1RD); + sleep_intctl_config2[1] = au_readl(IC1_CFG2RD); + sleep_intctl_src[1] = au_readl(IC1_SRCRD); + sleep_intctl_assign[1] = au_readl(IC1_ASSIGNRD); + sleep_intctl_wake[1] = au_readl(IC1_WAKERD); + sleep_intctl_mask[1] = au_readl(IC1_MASKRD); +} + +/* + * For most restore operations, we clear the entire register and + * then set the bits we found during the save. + */ +void restore_au1xxx_intctl(void) +{ + au_writel(0xffffffff, IC0_MASKCLR); au_sync(); + + au_writel(0xffffffff, IC0_CFG0CLR); au_sync(); + au_writel(sleep_intctl_config0[0], IC0_CFG0SET); au_sync(); + au_writel(0xffffffff, IC0_CFG1CLR); au_sync(); + au_writel(sleep_intctl_config1[0], IC0_CFG1SET); au_sync(); + au_writel(0xffffffff, IC0_CFG2CLR); au_sync(); + au_writel(sleep_intctl_config2[0], IC0_CFG2SET); au_sync(); + au_writel(0xffffffff, IC0_SRCCLR); au_sync(); + au_writel(sleep_intctl_src[0], IC0_SRCSET); au_sync(); + au_writel(0xffffffff, IC0_ASSIGNCLR); au_sync(); + au_writel(sleep_intctl_assign[0], IC0_ASSIGNSET); au_sync(); + au_writel(0xffffffff, IC0_WAKECLR); au_sync(); + au_writel(sleep_intctl_wake[0], IC0_WAKESET); au_sync(); + au_writel(0xffffffff, IC0_RISINGCLR); au_sync(); + au_writel(0xffffffff, IC0_FALLINGCLR); au_sync(); + au_writel(0x00000000, IC0_TESTBIT); au_sync(); + + au_writel(0xffffffff, IC1_MASKCLR); au_sync(); + + au_writel(0xffffffff, IC1_CFG0CLR); au_sync(); + au_writel(sleep_intctl_config0[1], IC1_CFG0SET); au_sync(); + au_writel(0xffffffff, IC1_CFG1CLR); au_sync(); + au_writel(sleep_intctl_config1[1], IC1_CFG1SET); au_sync(); + au_writel(0xffffffff, IC1_CFG2CLR); au_sync(); + au_writel(sleep_intctl_config2[1], IC1_CFG2SET); au_sync(); + au_writel(0xffffffff, IC1_SRCCLR); au_sync(); + au_writel(sleep_intctl_src[1], IC1_SRCSET); au_sync(); + au_writel(0xffffffff, IC1_ASSIGNCLR); au_sync(); + au_writel(sleep_intctl_assign[1], IC1_ASSIGNSET); au_sync(); + au_writel(0xffffffff, IC1_WAKECLR); au_sync(); + au_writel(sleep_intctl_wake[1], IC1_WAKESET); au_sync(); + au_writel(0xffffffff, IC1_RISINGCLR); au_sync(); + au_writel(0xffffffff, IC1_FALLINGCLR); au_sync(); + au_writel(0x00000000, IC1_TESTBIT); au_sync(); + + au_writel(sleep_intctl_mask[1], IC1_MASKSET); au_sync(); + + au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync(); +} +#endif /* CONFIG_PM */ + + +inline void local_enable_irq(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + if (bit >= 32) { + au_writel(1 << (bit - 32), IC1_MASKSET); + au_writel(1 << (bit - 32), IC1_WAKESET); + } else { + au_writel(1 << bit, IC0_MASKSET); + au_writel(1 << bit, IC0_WAKESET); + } + au_sync(); +} + + +inline void local_disable_irq(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + if (bit >= 32) { + au_writel(1 << (bit - 32), IC1_MASKCLR); + au_writel(1 << (bit - 32), IC1_WAKECLR); + } else { + au_writel(1 << bit, IC0_MASKCLR); + au_writel(1 << bit, IC0_WAKECLR); + } + au_sync(); +} + + +static inline void mask_and_ack_rise_edge_irq(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + if (bit >= 32) { + au_writel(1 << (bit - 32), IC1_RISINGCLR); + au_writel(1 << (bit - 32), IC1_MASKCLR); + } else { + au_writel(1 << bit, IC0_RISINGCLR); + au_writel(1 << bit, IC0_MASKCLR); + } + au_sync(); +} + + +static inline void mask_and_ack_fall_edge_irq(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + if (bit >= 32) { + au_writel(1 << (bit - 32), IC1_FALLINGCLR); + au_writel(1 << (bit - 32), IC1_MASKCLR); + } else { + au_writel(1 << bit, IC0_FALLINGCLR); + au_writel(1 << bit, IC0_MASKCLR); + } + au_sync(); +} + + +static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + /* + * This may assume that we don't get interrupts from + * both edges at once, or if we do, that we don't care. + */ + if (bit >= 32) { + au_writel(1 << (bit - 32), IC1_FALLINGCLR); + au_writel(1 << (bit - 32), IC1_RISINGCLR); + au_writel(1 << (bit - 32), IC1_MASKCLR); + } else { + au_writel(1 << bit, IC0_FALLINGCLR); + au_writel(1 << bit, IC0_RISINGCLR); + au_writel(1 << bit, IC0_MASKCLR); + } + au_sync(); +} + +static inline void mask_and_ack_level_irq(unsigned int irq_nr) +{ + local_disable_irq(irq_nr); + au_sync(); +#if defined(CONFIG_MIPS_PB1000) + if (irq_nr == AU1000_GPIO_15) { + au_writel(0x8000, PB1000_MDR); /* ack int */ + au_sync(); + } +#endif +} + +static void end_irq(unsigned int irq_nr) +{ + if (!(irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + local_enable_irq(irq_nr); + +#if defined(CONFIG_MIPS_PB1000) + if (irq_nr == AU1000_GPIO_15) { + au_writel(0x4000, PB1000_MDR); /* enable int */ + au_sync(); + } +#endif +} + +unsigned long save_local_and_disable(int controller) +{ + int i; + unsigned long flags, mask; + + spin_lock_irqsave(&irq_lock, flags); + if (controller) { + mask = au_readl(IC1_MASKSET); + for (i = 32; i < 64; i++) + local_disable_irq(i); + } else { + mask = au_readl(IC0_MASKSET); + for (i = 0; i < 32; i++) + local_disable_irq(i); + } + spin_unlock_irqrestore(&irq_lock, flags); + + return mask; +} + +void restore_local_and_enable(int controller, unsigned long mask) +{ + int i; + unsigned long flags, new_mask; + + spin_lock_irqsave(&irq_lock, flags); + for (i = 0; i < 32; i++) + if (mask & (1 << i)) { + if (controller) + local_enable_irq(i + 32); + else + local_enable_irq(i); + } + + if (controller) + new_mask = au_readl(IC1_MASKSET); + else + new_mask = au_readl(IC0_MASKSET); + + spin_unlock_irqrestore(&irq_lock, flags); +} + + +static struct irq_chip rise_edge_irq_type = { + .name = "Au1000 Rise Edge", + .ack = mask_and_ack_rise_edge_irq, + .mask = local_disable_irq, + .mask_ack = mask_and_ack_rise_edge_irq, + .unmask = local_enable_irq, + .end = end_irq, +}; + +static struct irq_chip fall_edge_irq_type = { + .name = "Au1000 Fall Edge", + .ack = mask_and_ack_fall_edge_irq, + .mask = local_disable_irq, + .mask_ack = mask_and_ack_fall_edge_irq, + .unmask = local_enable_irq, + .end = end_irq, +}; + +static struct irq_chip either_edge_irq_type = { + .name = "Au1000 Rise or Fall Edge", + .ack = mask_and_ack_either_edge_irq, + .mask = local_disable_irq, + .mask_ack = mask_and_ack_either_edge_irq, + .unmask = local_enable_irq, + .end = end_irq, +}; + +static struct irq_chip level_irq_type = { + .name = "Au1000 Level", + .ack = mask_and_ack_level_irq, + .mask = local_disable_irq, + .mask_ack = mask_and_ack_level_irq, + .unmask = local_enable_irq, + .end = end_irq, +}; + +static void __init setup_local_irq(unsigned int irq_nr, int type, int int_req) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + if (irq_nr > AU1000_MAX_INTR) + return; + + /* Config2[n], Config1[n], Config0[n] */ + if (bit >= 32) { + switch (type) { + case INTC_INT_RISE_EDGE: /* 0:0:1 */ + au_writel(1 << (bit - 32), IC1_CFG2CLR); + au_writel(1 << (bit - 32), IC1_CFG1CLR); + au_writel(1 << (bit - 32), IC1_CFG0SET); + set_irq_chip(irq_nr, &rise_edge_irq_type); + break; + case INTC_INT_FALL_EDGE: /* 0:1:0 */ + au_writel(1 << (bit - 32), IC1_CFG2CLR); + au_writel(1 << (bit - 32), IC1_CFG1SET); + au_writel(1 << (bit - 32), IC1_CFG0CLR); + set_irq_chip(irq_nr, &fall_edge_irq_type); + break; + case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */ + au_writel(1 << (bit - 32), IC1_CFG2CLR); + au_writel(1 << (bit - 32), IC1_CFG1SET); + au_writel(1 << (bit - 32), IC1_CFG0SET); + set_irq_chip(irq_nr, &either_edge_irq_type); + break; + case INTC_INT_HIGH_LEVEL: /* 1:0:1 */ + au_writel(1 << (bit - 32), IC1_CFG2SET); + au_writel(1 << (bit - 32), IC1_CFG1CLR); + au_writel(1 << (bit - 32), IC1_CFG0SET); + set_irq_chip(irq_nr, &level_irq_type); + break; + case INTC_INT_LOW_LEVEL: /* 1:1:0 */ + au_writel(1 << (bit - 32), IC1_CFG2SET); + au_writel(1 << (bit - 32), IC1_CFG1SET); + au_writel(1 << (bit - 32), IC1_CFG0CLR); + set_irq_chip(irq_nr, &level_irq_type); + break; + case INTC_INT_DISABLED: /* 0:0:0 */ + au_writel(1 << (bit - 32), IC1_CFG0CLR); + au_writel(1 << (bit - 32), IC1_CFG1CLR); + au_writel(1 << (bit - 32), IC1_CFG2CLR); + break; + default: /* disable the interrupt */ + printk(KERN_WARNING "unexpected int type %d (irq %d)\n", + type, irq_nr); + au_writel(1 << (bit - 32), IC1_CFG0CLR); + au_writel(1 << (bit - 32), IC1_CFG1CLR); + au_writel(1 << (bit - 32), IC1_CFG2CLR); + return; + } + if (int_req) /* assign to interrupt request 1 */ + au_writel(1 << (bit - 32), IC1_ASSIGNCLR); + else /* assign to interrupt request 0 */ + au_writel(1 << (bit - 32), IC1_ASSIGNSET); + au_writel(1 << (bit - 32), IC1_SRCSET); + au_writel(1 << (bit - 32), IC1_MASKCLR); + au_writel(1 << (bit - 32), IC1_WAKECLR); + } else { + switch (type) { + case INTC_INT_RISE_EDGE: /* 0:0:1 */ + au_writel(1 << bit, IC0_CFG2CLR); + au_writel(1 << bit, IC0_CFG1CLR); + au_writel(1 << bit, IC0_CFG0SET); + set_irq_chip(irq_nr, &rise_edge_irq_type); + break; + case INTC_INT_FALL_EDGE: /* 0:1:0 */ + au_writel(1 << bit, IC0_CFG2CLR); + au_writel(1 << bit, IC0_CFG1SET); + au_writel(1 << bit, IC0_CFG0CLR); + set_irq_chip(irq_nr, &fall_edge_irq_type); + break; + case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */ + au_writel(1 << bit, IC0_CFG2CLR); + au_writel(1 << bit, IC0_CFG1SET); + au_writel(1 << bit, IC0_CFG0SET); + set_irq_chip(irq_nr, &either_edge_irq_type); + break; + case INTC_INT_HIGH_LEVEL: /* 1:0:1 */ + au_writel(1 << bit, IC0_CFG2SET); + au_writel(1 << bit, IC0_CFG1CLR); + au_writel(1 << bit, IC0_CFG0SET); + set_irq_chip(irq_nr, &level_irq_type); + break; + case INTC_INT_LOW_LEVEL: /* 1:1:0 */ + au_writel(1 << bit, IC0_CFG2SET); + au_writel(1 << bit, IC0_CFG1SET); + au_writel(1 << bit, IC0_CFG0CLR); + set_irq_chip(irq_nr, &level_irq_type); + break; + case INTC_INT_DISABLED: /* 0:0:0 */ + au_writel(1 << bit, IC0_CFG0CLR); + au_writel(1 << bit, IC0_CFG1CLR); + au_writel(1 << bit, IC0_CFG2CLR); + break; + default: /* disable the interrupt */ + printk(KERN_WARNING "unexpected int type %d (irq %d)\n", + type, irq_nr); + au_writel(1 << bit, IC0_CFG0CLR); + au_writel(1 << bit, IC0_CFG1CLR); + au_writel(1 << bit, IC0_CFG2CLR); + return; + } + if (int_req) /* assign to interrupt request 1 */ + au_writel(1 << bit, IC0_ASSIGNCLR); + else /* assign to interrupt request 0 */ + au_writel(1 << bit, IC0_ASSIGNSET); + au_writel(1 << bit, IC0_SRCSET); + au_writel(1 << bit, IC0_MASKCLR); + au_writel(1 << bit, IC0_WAKECLR); + } + au_sync(); +} + +/* + * Interrupts are nested. Even if an interrupt handler is registered + * as "fast", we might get another interrupt before we return from + * intcX_reqX_irqdispatch(). + */ + +static void intc0_req0_irqdispatch(void) +{ + static unsigned long intc0_req0; + unsigned int bit; + + intc0_req0 |= au_readl(IC0_REQ0INT); + + if (!intc0_req0) + return; + +#ifdef AU1000_USB_DEV_REQ_INT + /* + * Because of the tight timing of SETUP token to reply + * transactions, the USB devices-side packet complete + * interrupt needs the highest priority. + */ + if ((intc0_req0 & (1 << AU1000_USB_DEV_REQ_INT))) { + intc0_req0 &= ~(1 << AU1000_USB_DEV_REQ_INT); + do_IRQ(AU1000_USB_DEV_REQ_INT); + return; + } +#endif + bit = __ffs(intc0_req0); + intc0_req0 &= ~(1 << bit); + do_IRQ(AU1000_INTC0_INT_BASE + bit); +} + + +static void intc0_req1_irqdispatch(void) +{ + static unsigned long intc0_req1; + unsigned int bit; + + intc0_req1 |= au_readl(IC0_REQ1INT); + + if (!intc0_req1) + return; + + bit = __ffs(intc0_req1); + intc0_req1 &= ~(1 << bit); + do_IRQ(AU1000_INTC0_INT_BASE + bit); +} + + +/* + * Interrupt Controller 1: + * interrupts 32 - 63 + */ +static void intc1_req0_irqdispatch(void) +{ + static unsigned long intc1_req0; + unsigned int bit; + + intc1_req0 |= au_readl(IC1_REQ0INT); + + if (!intc1_req0) + return; + + bit = __ffs(intc1_req0); + intc1_req0 &= ~(1 << bit); + do_IRQ(AU1000_INTC1_INT_BASE + bit); +} + + +static void intc1_req1_irqdispatch(void) +{ + static unsigned long intc1_req1; + unsigned int bit; + + intc1_req1 |= au_readl(IC1_REQ1INT); + + if (!intc1_req1) + return; + + bit = __ffs(intc1_req1); + intc1_req1 &= ~(1 << bit); + do_IRQ(AU1000_INTC1_INT_BASE + bit); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & CAUSEF_IP7) + do_IRQ(MIPS_CPU_IRQ_BASE + 7); + else if (pending & CAUSEF_IP2) + intc0_req0_irqdispatch(); + else if (pending & CAUSEF_IP3) + intc0_req1_irqdispatch(); + else if (pending & CAUSEF_IP4) + intc1_req0_irqdispatch(); + else if (pending & CAUSEF_IP5) + intc1_req1_irqdispatch(); + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + int i; + struct au1xxx_irqmap *imp; + extern struct au1xxx_irqmap au1xxx_irq_map[]; + extern struct au1xxx_irqmap au1xxx_ic0_map[]; + extern int au1xxx_nr_irqs; + extern int au1xxx_ic0_nr_irqs; + + /* + * Initialize interrupt controllers to a safe state. + */ + au_writel(0xffffffff, IC0_CFG0CLR); + au_writel(0xffffffff, IC0_CFG1CLR); + au_writel(0xffffffff, IC0_CFG2CLR); + au_writel(0xffffffff, IC0_MASKCLR); + au_writel(0xffffffff, IC0_ASSIGNSET); + au_writel(0xffffffff, IC0_WAKECLR); + au_writel(0xffffffff, IC0_SRCSET); + au_writel(0xffffffff, IC0_FALLINGCLR); + au_writel(0xffffffff, IC0_RISINGCLR); + au_writel(0x00000000, IC0_TESTBIT); + + au_writel(0xffffffff, IC1_CFG0CLR); + au_writel(0xffffffff, IC1_CFG1CLR); + au_writel(0xffffffff, IC1_CFG2CLR); + au_writel(0xffffffff, IC1_MASKCLR); + au_writel(0xffffffff, IC1_ASSIGNSET); + au_writel(0xffffffff, IC1_WAKECLR); + au_writel(0xffffffff, IC1_SRCSET); + au_writel(0xffffffff, IC1_FALLINGCLR); + au_writel(0xffffffff, IC1_RISINGCLR); + au_writel(0x00000000, IC1_TESTBIT); + + mips_cpu_irq_init(); + + /* + * Initialize IC0, which is fixed per processor. + */ + imp = au1xxx_ic0_map; + for (i = 0; i < au1xxx_ic0_nr_irqs; i++) { + setup_local_irq(imp->im_irq, imp->im_type, imp->im_request); + imp++; + } + + /* + * Now set up the irq mapping for the board. + */ + imp = au1xxx_irq_map; + for (i = 0; i < au1xxx_nr_irqs; i++) { + setup_local_irq(imp->im_irq, imp->im_type, imp->im_request); + imp++; + } + + set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4); + + /* Board specific IRQ initialization. + */ + if (board_init_irq) + board_init_irq(); +} diff --git a/arch/mips/alchemy/common/pci.c b/arch/mips/alchemy/common/pci.c new file mode 100644 index 000000000000..7866cf50cf99 --- /dev/null +++ b/arch/mips/alchemy/common/pci.c @@ -0,0 +1,104 @@ +/* + * BRIEF MODULE DESCRIPTION + * Alchemy/AMD Au1x00 PCI support. + * + * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * + * Support for all devices (greater than 16) added by David Gathright. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +#include + +/* TBD */ +static struct resource pci_io_resource = { + .start = PCI_IO_START, + .end = PCI_IO_END, + .name = "PCI IO space", + .flags = IORESOURCE_IO +}; + +static struct resource pci_mem_resource = { + .start = PCI_MEM_START, + .end = PCI_MEM_END, + .name = "PCI memory space", + .flags = IORESOURCE_MEM +}; + +extern struct pci_ops au1x_pci_ops; + +static struct pci_controller au1x_controller = { + .pci_ops = &au1x_pci_ops, + .io_resource = &pci_io_resource, + .mem_resource = &pci_mem_resource, +}; + +#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) +static unsigned long virt_io_addr; +#endif + +static int __init au1x_pci_setup(void) +{ + extern void au1x_pci_cfg_init(void); + +#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) + virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START, + Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1); + + if (!virt_io_addr) { + printk(KERN_ERR "Unable to ioremap pci space\n"); + return 1; + } + au1x_controller.io_map_base = virt_io_addr; + +#ifdef CONFIG_DMA_NONCOHERENT + { + /* + * Set the NC bit in controller for Au1500 pre-AC silicon + */ + u32 prid = read_c0_prid(); + + if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) { + au_writel((1 << 16) | au_readl(Au1500_PCI_CFG), + Au1500_PCI_CFG); + printk(KERN_INFO "Non-coherent PCI accesses enabled\n"); + } + } +#endif + + set_io_port_base(virt_io_addr); +#endif + + au1x_pci_cfg_init(); + + register_pci_controller(&au1x_controller); + return 0; +} + +arch_initcall(au1x_pci_setup); diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c new file mode 100644 index 000000000000..dc8a67efac28 --- /dev/null +++ b/arch/mips/alchemy/common/platform.c @@ -0,0 +1,319 @@ +/* + * Platform device support for Au1x00 SoCs. + * + * Copyright 2004, Matt Porter + * + * (C) Copyright Embedded Alley Solutions, Inc 2005 + * Author: Pantelis Antoniou + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include + +#include + +#define PORT(_base, _irq) \ + { \ + .iobase = _base, \ + .membase = (void __iomem *)_base,\ + .mapbase = CPHYSADDR(_base), \ + .irq = _irq, \ + .regshift = 2, \ + .iotype = UPIO_AU, \ + .flags = UPF_SKIP_TEST \ + } + +static struct plat_serial8250_port au1x00_uart_data[] = { +#if defined(CONFIG_SERIAL_8250_AU1X00) +#if defined(CONFIG_SOC_AU1000) + PORT(UART0_ADDR, AU1000_UART0_INT), + PORT(UART1_ADDR, AU1000_UART1_INT), + PORT(UART2_ADDR, AU1000_UART2_INT), + PORT(UART3_ADDR, AU1000_UART3_INT), +#elif defined(CONFIG_SOC_AU1500) + PORT(UART0_ADDR, AU1500_UART0_INT), + PORT(UART3_ADDR, AU1500_UART3_INT), +#elif defined(CONFIG_SOC_AU1100) + PORT(UART0_ADDR, AU1100_UART0_INT), + PORT(UART1_ADDR, AU1100_UART1_INT), + PORT(UART3_ADDR, AU1100_UART3_INT), +#elif defined(CONFIG_SOC_AU1550) + PORT(UART0_ADDR, AU1550_UART0_INT), + PORT(UART1_ADDR, AU1550_UART1_INT), + PORT(UART3_ADDR, AU1550_UART3_INT), +#elif defined(CONFIG_SOC_AU1200) + PORT(UART0_ADDR, AU1200_UART0_INT), + PORT(UART1_ADDR, AU1200_UART1_INT), +#endif +#endif /* CONFIG_SERIAL_8250_AU1X00 */ + { }, +}; + +static struct platform_device au1xx0_uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_AU1X00, + .dev = { + .platform_data = au1x00_uart_data, + }, +}; + +/* OHCI (USB full speed host controller) */ +static struct resource au1xxx_usb_ohci_resources[] = { + [0] = { + .start = USB_OHCI_BASE, + .end = USB_OHCI_BASE + USB_OHCI_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1000_USB_HOST_INT, + .end = AU1000_USB_HOST_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +/* The dmamask must be set for OHCI to work */ +static u64 ohci_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1xxx_usb_ohci_device = { + .name = "au1xxx-ohci", + .id = 0, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1xxx_usb_ohci_resources), + .resource = au1xxx_usb_ohci_resources, +}; + +/*** AU1100 LCD controller ***/ + +#ifdef CONFIG_FB_AU1100 +static struct resource au1100_lcd_resources[] = { + [0] = { + .start = LCD_PHYS_ADDR, + .end = LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_LCD_INT, + .end = AU1100_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1100_lcd_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1100_lcd_device = { + .name = "au1100-lcd", + .id = 0, + .dev = { + .dma_mask = &au1100_lcd_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1100_lcd_resources), + .resource = au1100_lcd_resources, +}; +#endif + +#ifdef CONFIG_SOC_AU1200 +/* EHCI (USB high speed host controller) */ +static struct resource au1xxx_usb_ehci_resources[] = { + [0] = { + .start = USB_EHCI_BASE, + .end = USB_EHCI_BASE + USB_EHCI_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1000_USB_HOST_INT, + .end = AU1000_USB_HOST_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ehci_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1xxx_usb_ehci_device = { + .name = "au1xxx-ehci", + .id = 0, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1xxx_usb_ehci_resources), + .resource = au1xxx_usb_ehci_resources, +}; + +/* Au1200 UDC (USB gadget controller) */ +static struct resource au1xxx_usb_gdt_resources[] = { + [0] = { + .start = USB_UDC_BASE, + .end = USB_UDC_BASE + USB_UDC_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_USB_INT, + .end = AU1200_USB_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource au1xxx_mmc_resources[] = { + [0] = { + .start = SD0_PHYS_ADDR, + .end = SD0_PHYS_ADDR + 0x7ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SD1_PHYS_ADDR, + .end = SD1_PHYS_ADDR + 0x7ffff, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 udc_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1xxx_usb_gdt_device = { + .name = "au1xxx-udc", + .id = 0, + .dev = { + .dma_mask = &udc_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1xxx_usb_gdt_resources), + .resource = au1xxx_usb_gdt_resources, +}; + +/* Au1200 UOC (USB OTG controller) */ +static struct resource au1xxx_usb_otg_resources[] = { + [0] = { + .start = USB_UOC_BASE, + .end = USB_UOC_BASE + USB_UOC_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_USB_INT, + .end = AU1200_USB_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 uoc_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1xxx_usb_otg_device = { + .name = "au1xxx-uoc", + .id = 0, + .dev = { + .dma_mask = &uoc_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1xxx_usb_otg_resources), + .resource = au1xxx_usb_otg_resources, +}; + +static struct resource au1200_lcd_resources[] = { + [0] = { + .start = LCD_PHYS_ADDR, + .end = LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_LCD_INT, + .end = AU1200_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1200_lcd_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1200_lcd_device = { + .name = "au1200-lcd", + .id = 0, + .dev = { + .dma_mask = &au1200_lcd_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1200_lcd_resources), + .resource = au1200_lcd_resources, +}; + +static u64 au1xxx_mmc_dmamask = DMA_32BIT_MASK; + +static struct platform_device au1xxx_mmc_device = { + .name = "au1xxx-mmc", + .id = 0, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(au1xxx_mmc_resources), + .resource = au1xxx_mmc_resources, +}; +#endif /* #ifdef CONFIG_SOC_AU1200 */ + +static struct platform_device au1x00_pcmcia_device = { + .name = "au1x00-pcmcia", + .id = 0, +}; + +/* All Alchemy demoboards with I2C have this #define in their headers */ +#ifdef SMBUS_PSC_BASE +static struct resource pbdb_smbus_resources[] = { + { + .start = CPHYSADDR(SMBUS_PSC_BASE), + .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff), + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device pbdb_smbus_device = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(pbdb_smbus_resources), + .resource = pbdb_smbus_resources, +}; +#endif + +static struct platform_device *au1xxx_platform_devices[] __initdata = { + &au1xx0_uart_device, + &au1xxx_usb_ohci_device, + &au1x00_pcmcia_device, +#ifdef CONFIG_FB_AU1100 + &au1100_lcd_device, +#endif +#ifdef CONFIG_SOC_AU1200 + &au1xxx_usb_ehci_device, + &au1xxx_usb_gdt_device, + &au1xxx_usb_otg_device, + &au1200_lcd_device, + &au1xxx_mmc_device, +#endif +#ifdef SMBUS_PSC_BASE + &pbdb_smbus_device, +#endif +}; + +static int __init au1xxx_platform_init(void) +{ + unsigned int uartclk = get_au1x00_uart_baud_base() * 16; + int i; + + /* Fill up uartclk. */ + for (i = 0; au1x00_uart_data[i].flags; i++) + au1x00_uart_data[i].uartclk = uartclk; + + return platform_add_devices(au1xxx_platform_devices, + ARRAY_SIZE(au1xxx_platform_devices)); +} + +arch_initcall(au1xxx_platform_init); diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c new file mode 100644 index 000000000000..bd854a6d1d89 --- /dev/null +++ b/arch/mips/alchemy/common/power.c @@ -0,0 +1,465 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xx0 Power Management routines. + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * Some of the routines are right out of init/main.c, whose + * copyrights apply here. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include + +#ifdef CONFIG_PM + +#define DEBUG 1 +#ifdef DEBUG +#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__, ## args) +#else +#define DPRINTK(fmt, args...) +#endif + +static void au1000_calibrate_delay(void); + +extern unsigned long save_local_and_disable(int controller); +extern void restore_local_and_enable(int controller, unsigned long mask); +extern void local_enable_irq(unsigned int irq_nr); + +static DEFINE_SPINLOCK(pm_lock); + +/* + * We need to save/restore a bunch of core registers that are + * either volatile or reset to some state across a processor sleep. + * If reading a register doesn't provide a proper result for a + * later restore, we have to provide a function for loading that + * register and save a copy. + * + * We only have to save/restore registers that aren't otherwise + * done as part of a driver pm_* function. + */ +static unsigned int sleep_aux_pll_cntrl; +static unsigned int sleep_cpu_pll_cntrl; +static unsigned int sleep_pin_function; +static unsigned int sleep_uart0_inten; +static unsigned int sleep_uart0_fifoctl; +static unsigned int sleep_uart0_linectl; +static unsigned int sleep_uart0_clkdiv; +static unsigned int sleep_uart0_enable; +static unsigned int sleep_usbhost_enable; +static unsigned int sleep_usbdev_enable; +static unsigned int sleep_static_memctlr[4][3]; + +/* + * Define this to cause the value you write to /proc/sys/pm/sleep to + * set the TOY timer for the amount of time you want to sleep. + * This is done mainly for testing, but may be useful in other cases. + * The value is number of 32KHz ticks to sleep. + */ +#define SLEEP_TEST_TIMEOUT 1 +#ifdef SLEEP_TEST_TIMEOUT +static int sleep_ticks; +void wakeup_counter0_set(int ticks); +#endif + +static void save_core_regs(void) +{ + extern void save_au1xxx_intctl(void); + extern void pm_eth0_shutdown(void); + + /* + * Do the serial ports.....these really should be a pm_* + * registered function by the driver......but of course the + * standard serial driver doesn't understand our Au1xxx + * unique registers. + */ + sleep_uart0_inten = au_readl(UART0_ADDR + UART_IER); + sleep_uart0_fifoctl = au_readl(UART0_ADDR + UART_FCR); + sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR); + sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK); + sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL); + + /* Shutdown USB host/device. */ + sleep_usbhost_enable = au_readl(USB_HOST_CONFIG); + + /* There appears to be some undocumented reset register.... */ + au_writel(0, 0xb0100004); au_sync(); + au_writel(0, USB_HOST_CONFIG); au_sync(); + + sleep_usbdev_enable = au_readl(USBD_ENABLE); + au_writel(0, USBD_ENABLE); au_sync(); + + /* Save interrupt controller state. */ + save_au1xxx_intctl(); + + /* Clocks and PLLs. */ + sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL); + + /* + * We don't really need to do this one, but unless we + * write it again it won't have a valid value if we + * happen to read it. + */ + sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL); + + sleep_pin_function = au_readl(SYS_PINFUNC); + + /* Save the static memory controller configuration. */ + sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0); + sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0); + sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0); + sleep_static_memctlr[1][0] = au_readl(MEM_STCFG1); + sleep_static_memctlr[1][1] = au_readl(MEM_STTIME1); + sleep_static_memctlr[1][2] = au_readl(MEM_STADDR1); + sleep_static_memctlr[2][0] = au_readl(MEM_STCFG2); + sleep_static_memctlr[2][1] = au_readl(MEM_STTIME2); + sleep_static_memctlr[2][2] = au_readl(MEM_STADDR2); + sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3); + sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3); + sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3); +} + +static void restore_core_regs(void) +{ + extern void restore_au1xxx_intctl(void); + extern void wakeup_counter0_adjust(void); + + au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync(); + au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync(); + au_writel(sleep_pin_function, SYS_PINFUNC); au_sync(); + + /* Restore the static memory controller configuration. */ + au_writel(sleep_static_memctlr[0][0], MEM_STCFG0); + au_writel(sleep_static_memctlr[0][1], MEM_STTIME0); + au_writel(sleep_static_memctlr[0][2], MEM_STADDR0); + au_writel(sleep_static_memctlr[1][0], MEM_STCFG1); + au_writel(sleep_static_memctlr[1][1], MEM_STTIME1); + au_writel(sleep_static_memctlr[1][2], MEM_STADDR1); + au_writel(sleep_static_memctlr[2][0], MEM_STCFG2); + au_writel(sleep_static_memctlr[2][1], MEM_STTIME2); + au_writel(sleep_static_memctlr[2][2], MEM_STADDR2); + au_writel(sleep_static_memctlr[3][0], MEM_STCFG3); + au_writel(sleep_static_memctlr[3][1], MEM_STTIME3); + au_writel(sleep_static_memctlr[3][2], MEM_STADDR3); + + /* + * Enable the UART if it was enabled before sleep. + * I guess I should define module control bits........ + */ + if (sleep_uart0_enable & 0x02) { + au_writel(0, UART0_ADDR + UART_MOD_CNTRL); au_sync(); + au_writel(1, UART0_ADDR + UART_MOD_CNTRL); au_sync(); + au_writel(3, UART0_ADDR + UART_MOD_CNTRL); au_sync(); + au_writel(sleep_uart0_inten, UART0_ADDR + UART_IER); au_sync(); + au_writel(sleep_uart0_fifoctl, UART0_ADDR + UART_FCR); au_sync(); + au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync(); + au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync(); + } + + restore_au1xxx_intctl(); + wakeup_counter0_adjust(); +} + +unsigned long suspend_mode; + +void wakeup_from_suspend(void) +{ + suspend_mode = 0; +} + +int au_sleep(void) +{ + unsigned long wakeup, flags; + extern void save_and_sleep(void); + + spin_lock_irqsave(&pm_lock, flags); + + save_core_regs(); + + flush_cache_all(); + + /** + ** The code below is all system dependent and we should probably + ** have a function call out of here to set this up. You need + ** to configure the GPIO or timer interrupts that will bring + ** you out of sleep. + ** For testing, the TOY counter wakeup is useful. + **/ +#if 0 + au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD); + + /* GPIO 6 can cause a wake up event */ + wakeup = au_readl(SYS_WAKEMSK); + wakeup &= ~(1 << 8); /* turn off match20 wakeup */ + wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */ +#else + /* For testing, allow match20 to wake us up. */ +#ifdef SLEEP_TEST_TIMEOUT + wakeup_counter0_set(sleep_ticks); +#endif + wakeup = 1 << 8; /* turn on match20 wakeup */ + wakeup = 0; +#endif + au_writel(1, SYS_WAKESRC); /* clear cause */ + au_sync(); + au_writel(wakeup, SYS_WAKEMSK); + au_sync(); + + save_and_sleep(); + + /* + * After a wakeup, the cpu vectors back to 0x1fc00000, so + * it's up to the boot code to get us back here. + */ + restore_core_regs(); + spin_unlock_irqrestore(&pm_lock, flags); + return 0; +} + +static int pm_do_sleep(ctl_table *ctl, int write, struct file *file, + void __user *buffer, size_t *len, loff_t *ppos) +{ +#ifdef SLEEP_TEST_TIMEOUT +#define TMPBUFLEN2 16 + char buf[TMPBUFLEN2], *p; +#endif + + if (!write) + *len = 0; + else { +#ifdef SLEEP_TEST_TIMEOUT + if (*len > TMPBUFLEN2 - 1) + return -EFAULT; + if (copy_from_user(buf, buffer, *len)) + return -EFAULT; + buf[*len] = 0; + p = buf; + sleep_ticks = simple_strtoul(p, &p, 0); +#endif + + au_sleep(); + } + return 0; +} + +static int pm_do_freq(ctl_table *ctl, int write, struct file *file, + void __user *buffer, size_t *len, loff_t *ppos) +{ + int retval = 0, i; + unsigned long val, pll; +#define TMPBUFLEN 64 +#define MAX_CPU_FREQ 396 + char buf[TMPBUFLEN], *p; + unsigned long flags, intc0_mask, intc1_mask; + unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh; + unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh; + unsigned long baud_rate; + + spin_lock_irqsave(&pm_lock, flags); + if (!write) + *len = 0; + else { + /* Parse the new frequency */ + if (*len > TMPBUFLEN - 1) { + spin_unlock_irqrestore(&pm_lock, flags); + return -EFAULT; + } + if (copy_from_user(buf, buffer, *len)) { + spin_unlock_irqrestore(&pm_lock, flags); + return -EFAULT; + } + buf[*len] = 0; + p = buf; + val = simple_strtoul(p, &p, 0); + if (val > MAX_CPU_FREQ) { + spin_unlock_irqrestore(&pm_lock, flags); + return -EFAULT; + } + + pll = val / 12; + if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */ + /* Revisit this for higher speed CPUs */ + spin_unlock_irqrestore(&pm_lock, flags); + return -EFAULT; + } + + old_baud_base = get_au1x00_uart_baud_base(); + old_cpu_freq = get_au1x00_speed(); + + new_cpu_freq = pll * 12 * 1000000; + new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL) + & 0x03) + 2) * 16)); + set_au1x00_speed(new_cpu_freq); + set_au1x00_uart_baud_base(new_baud_base); + + old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff; + new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) | + (au_readl(MEM_SDREFCFG) & ~0x1ffffff); + + au_writel(pll, SYS_CPUPLL); + au_sync_delay(1); + au_writel(new_refresh, MEM_SDREFCFG); + au_sync_delay(1); + + for (i = 0; i < 4; i++) + if (au_readl(UART_BASE + UART_MOD_CNTRL + + i * 0x00100000) == 3) { + old_clk = au_readl(UART_BASE + UART_CLK + + i * 0x00100000); + baud_rate = old_baud_base / old_clk; + /* + * We won't get an exact baud rate and the error + * could be significant enough that our new + * calculation will result in a clock that will + * give us a baud rate that's too far off from + * what we really want. + */ + if (baud_rate > 100000) + baud_rate = 115200; + else if (baud_rate > 50000) + baud_rate = 57600; + else if (baud_rate > 30000) + baud_rate = 38400; + else if (baud_rate > 17000) + baud_rate = 19200; + else + baud_rate = 9600; + new_clk = new_baud_base / baud_rate; + au_writel(new_clk, UART_BASE + UART_CLK + + i * 0x00100000); + au_sync_delay(10); + } + } + + /* + * We don't want _any_ interrupts other than match20. Otherwise our + * au1000_calibrate_delay() calculation will be off, potentially a lot. + */ + intc0_mask = save_local_and_disable(0); + intc1_mask = save_local_and_disable(1); + local_enable_irq(AU1000_TOY_MATCH2_INT); + spin_unlock_irqrestore(&pm_lock, flags); + au1000_calibrate_delay(); + restore_local_and_enable(0, intc0_mask); + restore_local_and_enable(1, intc1_mask); + + return retval; +} + + +static struct ctl_table pm_table[] = { + { + .ctl_name = CTL_UNNUMBERED, + .procname = "sleep", + .data = NULL, + .maxlen = 0, + .mode = 0600, + .proc_handler = &pm_do_sleep + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "freq", + .data = NULL, + .maxlen = 0, + .mode = 0600, + .proc_handler = &pm_do_freq + }, + {} +}; + +static struct ctl_table pm_dir_table[] = { + { + .ctl_name = CTL_UNNUMBERED, + .procname = "pm", + .mode = 0555, + .child = pm_table + }, + {} +}; + +/* + * Initialize power interface + */ +static int __init pm_init(void) +{ + register_sysctl_table(pm_dir_table); + return 0; +} + +__initcall(pm_init); + +/* + * This is right out of init/main.c + */ + +/* + * This is the number of bits of precision for the loops_per_jiffy. + * Each bit takes on average 1.5/HZ seconds. This (like the original) + * is a little better than 1%. + */ +#define LPS_PREC 8 + +static void au1000_calibrate_delay(void) +{ + unsigned long ticks, loopbit; + int lps_precision = LPS_PREC; + + loops_per_jiffy = 1 << 12; + + while (loops_per_jiffy <<= 1) { + /* Wait for "start of" clock tick */ + ticks = jiffies; + while (ticks == jiffies) + /* nothing */ ; + /* Go ... */ + ticks = jiffies; + __delay(loops_per_jiffy); + ticks = jiffies - ticks; + if (ticks) + break; + } + + /* + * Do a binary approximation to get loops_per_jiffy set to be equal + * one clock (up to lps_precision bits) + */ + loops_per_jiffy >>= 1; + loopbit = loops_per_jiffy; + while (lps_precision-- && (loopbit >>= 1)) { + loops_per_jiffy |= loopbit; + ticks = jiffies; + while (ticks == jiffies); + ticks = jiffies; + __delay(loops_per_jiffy); + if (jiffies != ticks) /* longer than 1 tick */ + loops_per_jiffy &= ~loopbit; + } +} +#endif /* CONFIG_PM */ diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c new file mode 100644 index 000000000000..18b310b475ca --- /dev/null +++ b/arch/mips/alchemy/common/prom.c @@ -0,0 +1,146 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PROM library initialisation code, supports YAMON and U-Boot. + * + * Copyright 2000-2001, 2006, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This file was derived from Carsten Langgaard's + * arch/mips/mips-boards/xx files. + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +#include + +int prom_argc; +char **prom_argv; +char **prom_envp; + +char * __init_or_module prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +void prom_init_cmdline(void) +{ + char *cp; + int actr; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while (actr < prom_argc) { + strcpy(cp, prom_argv[actr]); + cp += strlen(prom_argv[actr]); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ + --cp; + if (prom_argc > 1) + *cp = '\0'; +} + +char *prom_getenv(char *envname) +{ + /* + * Return a pointer to the given environment variable. + * YAMON uses "name", "value" pairs, while U-Boot uses "name=value". + */ + + char **env = prom_envp; + int i = strlen(envname); + int yamon = (*env && strchr(*env, '=') == NULL); + + while (*env) { + if (yamon) { + if (strcmp(envname, *env++) == 0) + return *env; + } else if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=') + return *env + i + 1; + env++; + } + + return NULL; +} + +static inline unsigned char str2hexnum(unsigned char c) +{ + if (c >= '0' && c <= '9') + return c - '0'; + if (c >= 'a' && c <= 'f') + return c - 'a' + 10; + if (c >= 'A' && c <= 'F') + return c - 'A' + 10; + + return 0; /* foo */ +} + +static inline void str2eaddr(unsigned char *ea, unsigned char *str) +{ + int i; + + for (i = 0; i < 6; i++) { + unsigned char num; + + if ((*str == '.') || (*str == ':')) + str++; + num = str2hexnum(*str++) << 4; + num |= str2hexnum(*str++); + ea[i] = num; + } +} + +int prom_get_ethernet_addr(char *ethernet_addr) +{ + char *ethaddr_str; + char *argptr; + + /* Check the environment variables first */ + ethaddr_str = prom_getenv("ethaddr"); + if (!ethaddr_str) { + /* Check command line */ + argptr = prom_getcmdline(); + ethaddr_str = strstr(argptr, "ethaddr="); + if (!ethaddr_str) + return -1; + + ethaddr_str += strlen("ethaddr="); + } + + str2eaddr(ethernet_addr, ethaddr_str); + + return 0; +} +EXPORT_SYMBOL(prom_get_ethernet_addr); + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/alchemy/common/puts.c b/arch/mips/alchemy/common/puts.c new file mode 100644 index 000000000000..55bbe24d45b6 --- /dev/null +++ b/arch/mips/alchemy/common/puts.c @@ -0,0 +1,68 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Low level UART routines to directly access Alchemy UART. + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#define SERIAL_BASE UART_BASE +#define SER_CMD 0x7 +#define SER_DATA 0x1 +#define TX_BUSY 0x20 + +#define TIMEOUT 0xffffff +#define SLOW_DOWN + +static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE; + +#ifdef SLOW_DOWN +static inline void slow_down(void) +{ + int k; + + for (k = 0; k < 10000; k++); +} +#else +#define slow_down() +#endif + +void +prom_putchar(const unsigned char c) +{ + unsigned char ch; + int i = 0; + + do { + ch = com1[SER_CMD]; + slow_down(); + i++; + if (i > TIMEOUT) + break; + } while (0 == (ch & TX_BUSY)); + + com1[SER_DATA] = c; +} diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c new file mode 100644 index 000000000000..d555429c8d6f --- /dev/null +++ b/arch/mips/alchemy/common/reset.c @@ -0,0 +1,189 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Au1xx0 reset routines. + * + * Copyright 2001, 2006, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include + +extern int au_sleep(void); + +void au1000_restart(char *command) +{ + /* Set all integrated peripherals to disabled states */ + extern void board_reset(void); + u32 prid = read_c0_prid(); + + printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n"); + + switch (prid & 0xFF000000) { + case 0x00000000: /* Au1000 */ + au_writel(0x02, 0xb0000010); /* ac97_enable */ + au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ + asm("sync"); + au_writel(0x00, 0xb017fffc); /* usbh_enable */ + au_writel(0x00, 0xb0200058); /* usbd_enable */ + au_writel(0x00, 0xb0300040); /* ir_enable */ + au_writel(0x00, 0xb4004104); /* mac dma */ + au_writel(0x00, 0xb4004114); /* mac dma */ + au_writel(0x00, 0xb4004124); /* mac dma */ + au_writel(0x00, 0xb4004134); /* mac dma */ + au_writel(0x00, 0xb0520000); /* macen0 */ + au_writel(0x00, 0xb0520004); /* macen1 */ + au_writel(0x00, 0xb1000008); /* i2s_enable */ + au_writel(0x00, 0xb1100100); /* uart0_enable */ + au_writel(0x00, 0xb1200100); /* uart1_enable */ + au_writel(0x00, 0xb1300100); /* uart2_enable */ + au_writel(0x00, 0xb1400100); /* uart3_enable */ + au_writel(0x02, 0xb1600100); /* ssi0_enable */ + au_writel(0x02, 0xb1680100); /* ssi1_enable */ + au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ + au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ + au_writel(0x00, 0xb1900028); /* sys_clksrc */ + au_writel(0x10, 0xb1900060); /* sys_cpupll */ + au_writel(0x00, 0xb1900064); /* sys_auxpll */ + au_writel(0x00, 0xb1900100); /* sys_pininputen */ + break; + case 0x01000000: /* Au1500 */ + au_writel(0x02, 0xb0000010); /* ac97_enable */ + au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ + asm("sync"); + au_writel(0x00, 0xb017fffc); /* usbh_enable */ + au_writel(0x00, 0xb0200058); /* usbd_enable */ + au_writel(0x00, 0xb4004104); /* mac dma */ + au_writel(0x00, 0xb4004114); /* mac dma */ + au_writel(0x00, 0xb4004124); /* mac dma */ + au_writel(0x00, 0xb4004134); /* mac dma */ + au_writel(0x00, 0xb1520000); /* macen0 */ + au_writel(0x00, 0xb1520004); /* macen1 */ + au_writel(0x00, 0xb1100100); /* uart0_enable */ + au_writel(0x00, 0xb1400100); /* uart3_enable */ + au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ + au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ + au_writel(0x00, 0xb1900028); /* sys_clksrc */ + au_writel(0x10, 0xb1900060); /* sys_cpupll */ + au_writel(0x00, 0xb1900064); /* sys_auxpll */ + au_writel(0x00, 0xb1900100); /* sys_pininputen */ + break; + case 0x02000000: /* Au1100 */ + au_writel(0x02, 0xb0000010); /* ac97_enable */ + au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ + asm("sync"); + au_writel(0x00, 0xb017fffc); /* usbh_enable */ + au_writel(0x00, 0xb0200058); /* usbd_enable */ + au_writel(0x00, 0xb0300040); /* ir_enable */ + au_writel(0x00, 0xb4004104); /* mac dma */ + au_writel(0x00, 0xb4004114); /* mac dma */ + au_writel(0x00, 0xb4004124); /* mac dma */ + au_writel(0x00, 0xb4004134); /* mac dma */ + au_writel(0x00, 0xb0520000); /* macen0 */ + au_writel(0x00, 0xb1000008); /* i2s_enable */ + au_writel(0x00, 0xb1100100); /* uart0_enable */ + au_writel(0x00, 0xb1200100); /* uart1_enable */ + au_writel(0x00, 0xb1400100); /* uart3_enable */ + au_writel(0x02, 0xb1600100); /* ssi0_enable */ + au_writel(0x02, 0xb1680100); /* ssi1_enable */ + au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ + au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ + au_writel(0x00, 0xb1900028); /* sys_clksrc */ + au_writel(0x10, 0xb1900060); /* sys_cpupll */ + au_writel(0x00, 0xb1900064); /* sys_auxpll */ + au_writel(0x00, 0xb1900100); /* sys_pininputen */ + break; + case 0x03000000: /* Au1550 */ + au_writel(0x00, 0xb1a00004); /* psc 0 */ + au_writel(0x00, 0xb1b00004); /* psc 1 */ + au_writel(0x00, 0xb0a00004); /* psc 2 */ + au_writel(0x00, 0xb0b00004); /* psc 3 */ + au_writel(0x00, 0xb017fffc); /* usbh_enable */ + au_writel(0x00, 0xb0200058); /* usbd_enable */ + au_writel(0x00, 0xb4004104); /* mac dma */ + au_writel(0x00, 0xb4004114); /* mac dma */ + au_writel(0x00, 0xb4004124); /* mac dma */ + au_writel(0x00, 0xb4004134); /* mac dma */ + au_writel(0x00, 0xb1520000); /* macen0 */ + au_writel(0x00, 0xb1520004); /* macen1 */ + au_writel(0x00, 0xb1100100); /* uart0_enable */ + au_writel(0x00, 0xb1200100); /* uart1_enable */ + au_writel(0x00, 0xb1400100); /* uart3_enable */ + au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ + au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ + au_writel(0x00, 0xb1900028); /* sys_clksrc */ + au_writel(0x10, 0xb1900060); /* sys_cpupll */ + au_writel(0x00, 0xb1900064); /* sys_auxpll */ + au_writel(0x00, 0xb1900100); /* sys_pininputen */ + break; + } + + set_c0_status(ST0_BEV | ST0_ERL); + change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); + flush_cache_all(); + write_c0_wired(0); + + /* Give board a chance to do a hardware reset */ + board_reset(); + + /* Jump to the beggining in case board_reset() is empty */ + __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); +} + +void au1000_halt(void) +{ +#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) + /* Power off system */ + printk(KERN_NOTICE "\n** Powering off...\n"); + au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C); + au_sync(); + while (1); /* should not get here */ +#else + printk(KERN_NOTICE "\n** You can safely turn off the power\n"); +#ifdef CONFIG_MIPS_MIRAGE + au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); +#endif +#ifdef CONFIG_MIPS_DB1200 + au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C); +#endif +#ifdef CONFIG_PM + au_sleep(); + + /* Should not get here */ + printk(KERN_ERR "Unable to put CPU in sleep mode\n"); + while (1); +#else + while (1) + __asm__(".set\tmips3\n\t" + "wait\n\t" + ".set\tmips0"); +#endif +#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */ +} + +void au1000_power_off(void) +{ + au1000_halt(); +} diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c new file mode 100644 index 000000000000..1ac6b06f42a3 --- /dev/null +++ b/arch/mips/alchemy/common/setup.c @@ -0,0 +1,160 @@ +/* + * Copyright 2000, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. +#include +#include +#include + +#include +#include +#include + +#include +#include + +extern void __init board_setup(void); +extern void au1000_restart(char *); +extern void au1000_halt(void); +extern void au1000_power_off(void); +extern void set_cpuspec(void); + +void __init plat_mem_setup(void) +{ + struct cpu_spec *sp; + char *argptr; + unsigned long prid, cpufreq, bclk; + + set_cpuspec(); + sp = cur_cpu_spec[0]; + + board_setup(); /* board specific setup */ + + prid = read_c0_prid(); + if (sp->cpu_pll_wo) +#ifdef CONFIG_SOC_AU1000_FREQUENCY + cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000; +#else + cpufreq = 396; +#endif + else + cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12; + printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq); + + if (sp->cpu_bclk) { + /* Enable BCLK switching */ + bclk = au_readl(SYS_POWERCTRL); + au_writel(bclk | 0x60, SYS_POWERCTRL); + printk(KERN_INFO "BCLK switching enabled!\n"); + } + + if (sp->cpu_od) + /* Various early Au1xx0 errata corrected by this */ + set_c0_config(1 << 19); /* Set Config[OD] */ + else + /* Clear to obtain best system bus performance */ + clear_c0_config(1 << 19); /* Clear Config[OD] */ + + argptr = prom_getcmdline(); + +#ifdef CONFIG_SERIAL_8250_CONSOLE + argptr = strstr(argptr, "console="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS0,115200"); + } +#endif + +#ifdef CONFIG_FB_AU1100 + argptr = strstr(argptr, "video="); + if (argptr == NULL) { + argptr = prom_getcmdline(); + /* default panel */ + /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ + } +#endif + +#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) + /* au1000 does not support vra, au1500 and au1100 do */ + strcat(argptr, " au1000_audio=vra"); + argptr = prom_getcmdline(); +#endif + _machine_restart = au1000_restart; + _machine_halt = au1000_halt; + pm_power_off = au1000_power_off; + + /* IO/MEM resources. */ + set_io_port_base(0); + ioport_resource.start = IOPORT_RESOURCE_START; + ioport_resource.end = IOPORT_RESOURCE_END; + iomem_resource.start = IOMEM_RESOURCE_START; + iomem_resource.end = IOMEM_RESOURCE_END; + + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_E0S); + au_writel(SYS_CNTRL_E0 | SYS_CNTRL_EN0, SYS_COUNTER_CNTRL); + au_sync(); + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S); + au_writel(0, SYS_TOYTRIM); +} + +#if defined(CONFIG_64BIT_PHYS_ADDR) +/* This routine should be valid for all Au1x based boards */ +phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + /* Don't fixup 36-bit addresses */ + if ((phys_addr >> 32) != 0) + return phys_addr; + +#ifdef CONFIG_PCI + { + u32 start = (u32)Au1500_PCI_MEM_START; + u32 end = (u32)Au1500_PCI_MEM_END; + + /* Check for PCI memory window */ + if (phys_addr >= start && (phys_addr + size - 1) <= end) + return (phys_t) + ((phys_addr - start) + Au1500_PCI_MEM_START); + } +#endif + + /* + * All Au1xx0 SOCs have a PCMCIA controller. + * We setup our 32-bit pseudo addresses to be equal to the + * 36-bit addr >> 4, to make it easier to check the address + * and fix it. + * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000. + * The pseudo address we use is 0xF400 0000. Any address over + * 0xF400 0000 is a PCMCIA pseudo address. + */ + if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) + return (phys_t)(phys_addr << 4); + + /* default nop */ + return phys_addr; +} +EXPORT_SYMBOL(__fixup_bigphys_addr); +#endif diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S new file mode 100644 index 000000000000..3006e270c8bc --- /dev/null +++ b/arch/mips/alchemy/common/sleeper.S @@ -0,0 +1,154 @@ +/* + * Copyright 2002 Embedded Edge, LLC + * Author: dan@embeddededge.com + * + * Sleep helper for Au1xxx sleep mode. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include + + .text + .set macro + .set noat + .align 5 + +/* Save all of the processor general registers and go to sleep. + * A wakeup condition will get us back here to restore the registers. + */ +LEAF(save_and_sleep) + + subu sp, PT_SIZE + sw $1, PT_R1(sp) + sw $2, PT_R2(sp) + sw $3, PT_R3(sp) + sw $4, PT_R4(sp) + sw $5, PT_R5(sp) + sw $6, PT_R6(sp) + sw $7, PT_R7(sp) + sw $8, PT_R8(sp) + sw $9, PT_R9(sp) + sw $10, PT_R10(sp) + sw $11, PT_R11(sp) + sw $12, PT_R12(sp) + sw $13, PT_R13(sp) + sw $14, PT_R14(sp) + sw $15, PT_R15(sp) + sw $16, PT_R16(sp) + sw $17, PT_R17(sp) + sw $18, PT_R18(sp) + sw $19, PT_R19(sp) + sw $20, PT_R20(sp) + sw $21, PT_R21(sp) + sw $22, PT_R22(sp) + sw $23, PT_R23(sp) + sw $24, PT_R24(sp) + sw $25, PT_R25(sp) + sw $26, PT_R26(sp) + sw $27, PT_R27(sp) + sw $28, PT_R28(sp) + sw $29, PT_R29(sp) + sw $30, PT_R30(sp) + sw $31, PT_R31(sp) + mfc0 k0, CP0_STATUS + sw k0, 0x20(sp) + mfc0 k0, CP0_CONTEXT + sw k0, 0x1c(sp) + mfc0 k0, CP0_PAGEMASK + sw k0, 0x18(sp) + mfc0 k0, CP0_CONFIG + sw k0, 0x14(sp) + + /* Now set up the scratch registers so the boot rom will + * return to this point upon wakeup. + */ + la k0, 1f + lui k1, 0xb190 + ori k1, 0x18 + sw sp, 0(k1) + ori k1, 0x1c + sw k0, 0(k1) + +/* Put SDRAM into self refresh. Preload instructions into cache, + * issue a precharge, then auto refresh, then sleep commands to it. + */ + la t0, sdsleep + .set mips3 + cache 0x14, 0(t0) + cache 0x14, 32(t0) + cache 0x14, 64(t0) + cache 0x14, 96(t0) + .set mips0 + +sdsleep: + lui k0, 0xb400 + sw zero, 0x001c(k0) /* Precharge */ + sw zero, 0x0020(k0) /* Auto refresh */ + sw zero, 0x0030(k0) /* SDRAM sleep */ + sync + + lui k1, 0xb190 + sw zero, 0x0078(k1) /* get ready to sleep */ + sync + sw zero, 0x007c(k1) /* Put processor to sleep */ + sync + + /* This is where we return upon wakeup. + * Reload all of the registers and return. + */ +1: nop + lw k0, 0x20(sp) + mtc0 k0, CP0_STATUS + lw k0, 0x1c(sp) + mtc0 k0, CP0_CONTEXT + lw k0, 0x18(sp) + mtc0 k0, CP0_PAGEMASK + lw k0, 0x14(sp) + mtc0 k0, CP0_CONFIG + + /* We need to catch the ealry Alchemy SOCs with + * the write-only Config[OD] bit and set it back to one... + */ + jal au1x00_fixup_config_od + lw $1, PT_R1(sp) + lw $2, PT_R2(sp) + lw $3, PT_R3(sp) + lw $4, PT_R4(sp) + lw $5, PT_R5(sp) + lw $6, PT_R6(sp) + lw $7, PT_R7(sp) + lw $8, PT_R8(sp) + lw $9, PT_R9(sp) + lw $10, PT_R10(sp) + lw $11, PT_R11(sp) + lw $12, PT_R12(sp) + lw $13, PT_R13(sp) + lw $14, PT_R14(sp) + lw $15, PT_R15(sp) + lw $16, PT_R16(sp) + lw $17, PT_R17(sp) + lw $18, PT_R18(sp) + lw $19, PT_R19(sp) + lw $20, PT_R20(sp) + lw $21, PT_R21(sp) + lw $22, PT_R22(sp) + lw $23, PT_R23(sp) + lw $24, PT_R24(sp) + lw $25, PT_R25(sp) + lw $26, PT_R26(sp) + lw $27, PT_R27(sp) + lw $28, PT_R28(sp) + lw $29, PT_R29(sp) + lw $30, PT_R30(sp) + lw $31, PT_R31(sp) + addiu sp, PT_SIZE + + jr ra +END(save_and_sleep) diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c new file mode 100644 index 000000000000..563d9390a872 --- /dev/null +++ b/arch/mips/alchemy/common/time.c @@ -0,0 +1,266 @@ +/* + * + * Copyright (C) 2001, 2006, 2008 MontaVista Software, + * Copied and modified Carsten Langgaard's time.c + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Setting up the clock on the MIPS boards. + * + * We provide the clock interrupt processing and the timer offset compute + * functions. If CONFIG_PM is selected, we also ensure the 32KHz timer is + * available. -- Dan + */ + +#include +#include +#include + +#include +#include +#include + +static int no_au1xxx_32khz; +extern int allow_au1k_wait; /* default off for CP0 Counter */ + +#ifdef CONFIG_PM +#if HZ < 100 || HZ > 1000 +#error "unsupported HZ value! Must be in [100,1000]" +#endif +#define MATCH20_INC (328 * 100 / HZ) /* magic number 328 is for HZ=100... */ +static unsigned long last_pc0, last_match20; +#endif + +static DEFINE_SPINLOCK(time_lock); + +unsigned long wtimer; + +#ifdef CONFIG_PM +static irqreturn_t counter0_irq(int irq, void *dev_id) +{ + unsigned long pc0; + int time_elapsed; + static int jiffie_drift; + + if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) { + /* should never happen! */ + printk(KERN_WARNING "counter 0 w status error\n"); + return IRQ_NONE; + } + + pc0 = au_readl(SYS_TOYREAD); + if (pc0 < last_match20) + /* counter overflowed */ + time_elapsed = (0xffffffff - last_match20) + pc0; + else + time_elapsed = pc0 - last_match20; + + while (time_elapsed > 0) { + do_timer(1); +#ifndef CONFIG_SMP + update_process_times(user_mode(get_irq_regs())); +#endif + time_elapsed -= MATCH20_INC; + last_match20 += MATCH20_INC; + jiffie_drift++; + } + + last_pc0 = pc0; + au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); + au_sync(); + + /* + * Our counter ticks at 10.009765625 ms/tick, we we're running + * almost 10 uS too slow per tick. + */ + + if (jiffie_drift >= 999) { + jiffie_drift -= 999; + do_timer(1); /* increment jiffies by one */ +#ifndef CONFIG_SMP + update_process_times(user_mode(get_irq_regs())); +#endif + } + + return IRQ_HANDLED; +} + +struct irqaction counter0_action = { + .handler = counter0_irq, + .flags = IRQF_DISABLED, + .name = "alchemy-toy", + .dev_id = NULL, +}; + +/* When we wakeup from sleep, we have to "catch up" on all of the + * timer ticks we have missed. + */ +void wakeup_counter0_adjust(void) +{ + unsigned long pc0; + int time_elapsed; + + pc0 = au_readl(SYS_TOYREAD); + if (pc0 < last_match20) + /* counter overflowed */ + time_elapsed = (0xffffffff - last_match20) + pc0; + else + time_elapsed = pc0 - last_match20; + + while (time_elapsed > 0) { + time_elapsed -= MATCH20_INC; + last_match20 += MATCH20_INC; + } + + last_pc0 = pc0; + au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); + au_sync(); + +} + +/* This is just for debugging to set the timer for a sleep delay. */ +void wakeup_counter0_set(int ticks) +{ + unsigned long pc0; + + pc0 = au_readl(SYS_TOYREAD); + last_pc0 = pc0; + au_writel(last_match20 + (MATCH20_INC * ticks), SYS_TOYMATCH2); + au_sync(); +} +#endif + +/* + * I haven't found anyone that doesn't use a 12 MHz source clock, + * but just in case..... + */ +#define AU1000_SRC_CLK 12000000 + +/* + * We read the real processor speed from the PLL. This is important + * because it is more accurate than computing it from the 32 KHz + * counter, if it exists. If we don't have an accurate processor + * speed, all of the peripherals that derive their clocks based on + * this advertised speed will introduce error and sometimes not work + * properly. This function is futher convoluted to still allow configurations + * to do that in case they have really, really old silicon with a + * write-only PLL register, that we need the 32 KHz when power management + * "wait" is enabled, and we need to detect if the 32 KHz isn't present + * but requested......got it? :-) -- Dan + */ +unsigned long calc_clock(void) +{ + unsigned long cpu_speed; + unsigned long flags; + unsigned long counter; + + spin_lock_irqsave(&time_lock, flags); + + /* Power management cares if we don't have a 32 KHz counter. */ + no_au1xxx_32khz = 0; + counter = au_readl(SYS_COUNTER_CNTRL); + if (counter & SYS_CNTRL_E0) { + int trim_divide = 16; + + au_writel(counter | SYS_CNTRL_EN1, SYS_COUNTER_CNTRL); + + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S); + /* RTC now ticks at 32.768/16 kHz */ + au_writel(trim_divide - 1, SYS_RTCTRIM); + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S); + + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); + au_writel(0, SYS_TOYWRITE); + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); + } else + no_au1xxx_32khz = 1; + + /* + * On early Au1000, sys_cpupll was write-only. Since these + * silicon versions of Au1000 are not sold by AMD, we don't bend + * over backwards trying to determine the frequency. + */ + if (cur_cpu_spec[0]->cpu_pll_wo) +#ifdef CONFIG_SOC_AU1000_FREQUENCY + cpu_speed = CONFIG_SOC_AU1000_FREQUENCY; +#else + cpu_speed = 396000000; +#endif + else + cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK; + /* On Alchemy CPU:counter ratio is 1:1 */ + mips_hpt_frequency = cpu_speed; + /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */ + set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL) + & 0x03) + 2) * 16)); + spin_unlock_irqrestore(&time_lock, flags); + return cpu_speed; +} + +void __init plat_time_init(void) +{ + unsigned int est_freq = calc_clock(); + + est_freq += 5000; /* round */ + est_freq -= est_freq%10000; + printk(KERN_INFO "CPU frequency %u.%02u MHz\n", + est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000); + set_au1x00_speed(est_freq); + set_au1x00_lcd_clock(); /* program the LCD clock */ + +#ifdef CONFIG_PM + /* + * setup counter 0, since it keeps ticking after a + * 'wait' instruction has been executed. The CP0 timer and + * counter 1 do NOT continue running after 'wait' + * + * It's too early to call request_irq() here, so we handle + * counter 0 interrupt as a special irq and it doesn't show + * up under /proc/interrupts. + * + * Check to ensure we really have a 32 KHz oscillator before + * we do this. + */ + if (no_au1xxx_32khz) + printk(KERN_WARNING "WARNING: no 32KHz clock found.\n"); + else { + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); + au_writel(0, SYS_TOYWRITE); + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); + + au_writel(au_readl(SYS_WAKEMSK) | (1 << 8), SYS_WAKEMSK); + au_writel(~0, SYS_WAKESRC); + au_sync(); + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); + + /* Setup match20 to interrupt once every HZ */ + last_pc0 = last_match20 = au_readl(SYS_TOYREAD); + au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); + au_sync(); + while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); + setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action); + + /* We can use the real 'wait' instruction. */ + allow_au1k_wait = 1; + } + +#endif +} diff --git a/arch/mips/alchemy/db1x00/Makefile b/arch/mips/alchemy/db1x00/Makefile new file mode 100644 index 000000000000..274db3b55d82 --- /dev/null +++ b/arch/mips/alchemy/db1x00/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# +# Makefile for the Alchemy Semiconductor DBAu1xx0 boards. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/db1x00/board_setup.c b/arch/mips/alchemy/db1x00/board_setup.c new file mode 100644 index 000000000000..9e5ccbbfcedd --- /dev/null +++ b/arch/mips/alchemy/db1x00/board_setup.c @@ -0,0 +1,108 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Db1x00 board setup. + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include +#include + +static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + +void board_reset(void) +{ + /* Hit BCSR.SW_RESET[RESET] */ + bcsr->swreset = 0x0000; +} + +void __init board_setup(void) +{ + u32 pin_func = 0; + + /* Not valid for Au1550 */ +#if defined(CONFIG_IRDA) && \ + (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) + /* Set IRFIRSEL instead of GPIO15 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; + au_writel(pin_func, SYS_PINFUNC); + /* Power off until the driver is in use */ + bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK; + bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF; + au_sync(); +#endif + bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */ + +#ifdef CONFIG_MIPS_MIRAGE + /* Enable GPIO[31:0] inputs */ + au_writel(0, SYS_PININPUTEN); + + /* GPIO[20] is output, tristate the other input primary GPIOs */ + au_writel(~(1 << 20), SYS_TRIOUTCLR); + + /* Set GPIO[210:208] instead of SSI_0 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; + + /* Set GPIO[215:211] for LEDs */ + pin_func |= 5 << 2; + + /* Set GPIO[214:213] for more LEDs */ + pin_func |= 5 << 12; + + /* Set GPIO[207:200] instead of PCMCIA/LCD */ + pin_func |= SYS_PF_LCD | SYS_PF_PC; + au_writel(pin_func, SYS_PINFUNC); + + /* + * Enable speaker amplifier. This should + * be part of the audio driver. + */ + au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR); + au_writel(0x02000200, GPIO2_OUTPUT); +#endif + + au_sync(); + +#ifdef CONFIG_MIPS_DB1000 + printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1500 + printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1100 + printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); +#endif +#ifdef CONFIG_MIPS_BOSPORUS + printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); +#endif +#ifdef CONFIG_MIPS_MIRAGE + printk(KERN_INFO "AMD Alchemy Mirage Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1550 + printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); +#endif +} diff --git a/arch/mips/alchemy/db1x00/init.c b/arch/mips/alchemy/db1x00/init.c new file mode 100644 index 000000000000..847413514964 --- /dev/null +++ b/arch/mips/alchemy/db1x00/init.c @@ -0,0 +1,62 @@ +/* + * BRIEF MODULE DESCRIPTION + * PB1000 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include + +#include + +const char *get_system_type(void) +{ +#ifdef CONFIG_MIPS_BOSPORUS + return "Alchemy Bosporus Gateway Reference"; +#else + return "Alchemy Db1x00"; +#endif +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/db1x00/irqmap.c b/arch/mips/alchemy/db1x00/irqmap.c new file mode 100644 index 000000000000..94c090e8bf7a --- /dev/null +++ b/arch/mips/alchemy/db1x00/irqmap.c @@ -0,0 +1,86 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include + +#ifdef CONFIG_MIPS_DB1500 +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ +}; +#endif + +#ifdef CONFIG_MIPS_BOSPORUS +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */ + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ +}; +#endif + +#ifdef CONFIG_MIPS_MIRAGE +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */ + [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */ + [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */ +}; +#endif + +#ifdef CONFIG_MIPS_DB1550 +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */ + [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ +}; +#endif + + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + +#ifndef CONFIG_MIPS_MIRAGE +#ifdef CONFIG_MIPS_DB1550 + { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */ + { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */ +#else + { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */ + { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */ + { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */ + + { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */ + { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */ + { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */ +#endif +#else + { AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */ +#endif + +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile new file mode 100644 index 000000000000..7c67b3d33bec --- /dev/null +++ b/arch/mips/alchemy/mtx-1/Makefile @@ -0,0 +1,12 @@ +# +# Copyright 2003 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# Bruno Randolf +# +# Makefile for 4G Systems MTX-1 board. +# + +lib-y := init.o board_setup.o irqmap.o +obj-y := platform.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c new file mode 100644 index 000000000000..3f8079186cf2 --- /dev/null +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -0,0 +1,98 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * 4G Systems MTX-1 board setup. + * + * Copyright 2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * Bruno Randolf + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include + +extern int (*board_pci_idsel)(unsigned int devsel, int assert); +int mtx1_pci_idsel(unsigned int devsel, int assert); + +void board_reset(void) +{ + /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ + au_writel(0x00000000, 0xAE00001C); +} + +void __init board_setup(void) +{ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + /* Enable USB power switch */ + au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR); + au_writel(0x100000, GPIO2_OUTPUT); +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + +#ifdef CONFIG_PCI +#if defined(__MIPSEB__) + au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); +#else + au_writel(0xf, Au1500_PCI_CFG); +#endif +#endif + + /* Initialize sys_pinfunc */ + au_writel(SYS_PF_NI2, SYS_PINFUNC); + + /* Initialize GPIO */ + au_writel(0xFFFFFFFF, SYS_TRIOUTCLR); + au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */ + au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */ + au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */ + au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */ + + /* Enable LED and set it to green */ + au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR); + au_writel(0x18000800, GPIO2_OUTPUT); + + board_pci_idsel = mtx1_pci_idsel; + + printk(KERN_INFO "4G Systems MTX-1 Board\n"); +} + +int +mtx1_pci_idsel(unsigned int devsel, int assert) +{ +#define MTX_IDSEL_ONLY_0_AND_3 0 +#if MTX_IDSEL_ONLY_0_AND_3 + if (devsel != 0 && devsel != 3) { + printk(KERN_ERR "*** not 0 or 3\n"); + return 0; + } +#endif + + if (assert && devsel != 0) + /* Suppress signal to Cardbus */ + au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */ + else + au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */ + au_sync_udelay(1); + return 1; +} + diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c new file mode 100644 index 000000000000..3bae13c28954 --- /dev/null +++ b/arch/mips/alchemy/mtx-1/init.c @@ -0,0 +1,60 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * 4G Systems MTX-1 board setup + * + * Copyright 2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * Bruno Randolf + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include + +#include + +const char *get_system_type(void) +{ + return "MTX-1"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/mtx-1/irqmap.c b/arch/mips/alchemy/mtx-1/irqmap.c new file mode 100644 index 000000000000..f2bf02951e9c --- /dev/null +++ b/arch/mips/alchemy/mtx-1/irqmap.c @@ -0,0 +1,52 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include + +char irq_tab_alchemy[][5] __initdata = { + [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */ + [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ + [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */ + [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ + [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */ + [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ + [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */ + [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ +}; + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, + { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c new file mode 100644 index 000000000000..8b5914d1241f --- /dev/null +++ b/arch/mips/alchemy/mtx-1/platform.c @@ -0,0 +1,149 @@ +/* + * MTX-1 platform devices registration + * + * Copyright (C) 2007, Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct gpio_keys_button mtx1_gpio_button[] = { + { + .gpio = 207, + .code = BTN_0, + .desc = "System button", + } +}; + +static struct gpio_keys_platform_data mtx1_buttons_data = { + .buttons = mtx1_gpio_button, + .nbuttons = ARRAY_SIZE(mtx1_gpio_button), +}; + +static struct platform_device mtx1_button = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &mtx1_buttons_data, + } +}; + +static struct resource mtx1_wdt_res[] = { + [0] = { + .start = 15, + .end = 15, + .name = "mtx1-wdt-gpio", + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device mtx1_wdt = { + .name = "mtx1-wdt", + .id = 0, + .num_resources = ARRAY_SIZE(mtx1_wdt_res), + .resource = mtx1_wdt_res, +}; + +static struct gpio_led default_leds[] = { + { + .name = "mtx1:green", + .gpio = 211, + }, { + .name = "mtx1:red", + .gpio = 212, + }, +}; + +static struct gpio_led_platform_data mtx1_led_data = { + .num_leds = ARRAY_SIZE(default_leds), + .leds = default_leds, +}; + +static struct platform_device mtx1_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mtx1_led_data, + } +}; + +static struct mtd_partition mtx1_mtd_partitions[] = { + { + .name = "filesystem", + .size = 0x01C00000, + .offset = 0, + }, + { + .name = "yamon", + .size = 0x00100000, + .offset = MTDPART_OFS_APPEND, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "kernel", + .size = 0x002c0000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "yamon env", + .size = 0x00040000, + .offset = MTDPART_OFS_APPEND, + }, +}; + +static struct physmap_flash_data mtx1_flash_data = { + .width = 4, + .nr_parts = 4, + .parts = mtx1_mtd_partitions, +}; + +static struct resource mtx1_mtd_resource = { + .start = 0x1e000000, + .end = 0x1fffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mtx1_mtd = { + .name = "physmap-flash", + .dev = { + .platform_data = &mtx1_flash_data, + }, + .num_resources = 1, + .resource = &mtx1_mtd_resource, +}; + +static struct __initdata platform_device * mtx1_devs[] = { + &mtx1_gpio_leds, + &mtx1_wdt, + &mtx1_button, + &mtx1_mtd, +}; + +static int __init mtx1_register_devices(void) +{ + gpio_direction_input(207); + return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs)); +} + +arch_initcall(mtx1_register_devices); diff --git a/arch/mips/alchemy/pb1000/Makefile b/arch/mips/alchemy/pb1000/Makefile new file mode 100644 index 000000000000..99bbec0ca41b --- /dev/null +++ b/arch/mips/alchemy/pb1000/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# +# Makefile for the Alchemy Semiconductor Pb1000 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/pb1000/board_setup.c b/arch/mips/alchemy/pb1000/board_setup.c new file mode 100644 index 000000000000..25df167a95b3 --- /dev/null +++ b/arch/mips/alchemy/pb1000/board_setup.c @@ -0,0 +1,165 @@ +/* + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include +#include + +void board_reset(void) +{ +} + +void __init board_setup(void) +{ + u32 pin_func, static_cfg0; + u32 sys_freqctrl, sys_clksrc; + u32 prid = read_c0_prid(); + + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ + au_writel(8, SYS_AUXPLL); + au_writel(0, SYS_PINSTATERD); + udelay(100); + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + /* Zero and disable FREQ2 */ + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* Zero and disable USBH/USBD clocks */ + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); + au_writel(sys_clksrc, SYS_CLKSRC); + + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); + + switch (prid & 0x000000FF) { + case 0x00: /* DA */ + case 0x01: /* HA */ + case 0x02: /* HB */ + /* CPU core freq to 48 MHz to slow it way down... */ + au_writel(4, SYS_CPUPLL); + + /* + * Setup 48 MHz FREQ2 from CPUPLL for USB Host + * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz + */ + sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* CPU core freq to 384 MHz */ + au_writel(0x20, SYS_CPUPLL); + + printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n"); + break; + + default: /* HC and newer */ + /* FREQ2 = aux / 2 = 48 MHz */ + sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | + SYS_FC_FE2 | SYS_FC_FS2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + break; + } + + /* + * Route 48 MHz FREQ2 into USB Host and/or Device + */ + sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT; + au_writel(sys_clksrc, SYS_CLKSRC); + + /* Configure pins GPIO[14:9] as GPIO */ + pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB); + + /* 2nd USB port is USB host */ + pin_func |= SYS_PF_USB; + + au_writel(pin_func, SYS_PINFUNC); + au_writel(0x2800, SYS_TRIOUTCLR); + au_writel(0x0030, SYS_OUTPUTCLR); +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + + /* Make GPIO 15 an input (for interrupt line) */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF; + /* We don't need I2S, so make it available for GPIO[31:29] */ + pin_func |= SYS_PF_I2S; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0x8000, SYS_TRIOUTCLR); + + static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00; + au_writel(static_cfg0, MEM_STCFG0); + + /* configure RCE2* for LCD */ + au_writel(0x00000004, MEM_STCFG2); + + /* MEM_STTIME2 */ + au_writel(0x09000000, MEM_STTIME2); + + /* Set 32-bit base address decoding for RCE2* */ + au_writel(0x10003ff0, MEM_STADDR2); + + /* + * PCI CPLD setup + * Expand CE0 to cover PCI + */ + au_writel(0x11803e40, MEM_STADDR1); + + /* Burst visibility on */ + au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0); + + au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */ + au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */ + + /* Setup the static bus controller */ + au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ + au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ + au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ + + /* + * Enable Au1000 BCLK switching - note: sed1356 must not use + * its BCLK (Au1000 LCLK) for any timings + */ + switch (prid & 0x000000FF) { + case 0x00: /* DA */ + case 0x01: /* HA */ + case 0x02: /* HB */ + break; + default: /* HC and newer */ + /* + * Enable sys bus clock divider when IDLE state or no bus + * activity. + */ + au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); + break; + } +} diff --git a/arch/mips/alchemy/pb1000/init.c b/arch/mips/alchemy/pb1000/init.c new file mode 100644 index 000000000000..8a9c7d57208d --- /dev/null +++ b/arch/mips/alchemy/pb1000/init.c @@ -0,0 +1,57 @@ +/* + * BRIEF MODULE DESCRIPTION + * Pb1000 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include + +#include + +const char *get_system_type(void) +{ + return "Alchemy Pb1000"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/pb1000/irqmap.c b/arch/mips/alchemy/pb1000/irqmap.c new file mode 100644 index 000000000000..b3d56b0af321 --- /dev/null +++ b/arch/mips/alchemy/pb1000/irqmap.c @@ -0,0 +1,38 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/pb1100/Makefile b/arch/mips/alchemy/pb1100/Makefile new file mode 100644 index 000000000000..793e97c49e46 --- /dev/null +++ b/arch/mips/alchemy/pb1100/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2001, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# +# Makefile for the Alchemy Semiconductor Pb1100 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/pb1100/board_setup.c b/arch/mips/alchemy/pb1100/board_setup.c new file mode 100644 index 000000000000..c0bfd59a7a36 --- /dev/null +++ b/arch/mips/alchemy/pb1100/board_setup.c @@ -0,0 +1,109 @@ +/* + * Copyright 2002, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include +#include + +void board_reset(void) +{ + /* Hit BCSR.RST_VDDI[SOFT_RESET] */ + au_writel(0x00000000, PB1100_RST_VDDI); +} + +void __init board_setup(void) +{ + volatile void __iomem *base = (volatile void __iomem *)0xac000000UL; + + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ + au_writel(8, SYS_AUXPLL); + au_writel(0, SYS_PININPUTEN); + udelay(100); + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + { + u32 pin_func, sys_freqctrl, sys_clksrc; + + /* Configure pins GPIO[14:9] as GPIO */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; + + /* Zero and disable FREQ2 */ + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* Zero and disable USBH/USBD/IrDA clock */ + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK); + au_writel(sys_clksrc, SYS_CLKSRC); + + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK); + + /* FREQ2 = aux / 2 = 48 MHz */ + sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | + SYS_FC_FE2 | SYS_FC_FS2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* + * Route 48 MHz FREQ2 into USBH/USBD/IrDA + */ + sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MIR_BIT; + au_writel(sys_clksrc, SYS_CLKSRC); + + /* Setup the static bus controller */ + au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ + au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ + au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ + + /* + * Get USB Functionality pin state (device vs host drive pins). + */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB; + /* 2nd USB port is USB host. */ + pin_func |= SYS_PF_USB; + au_writel(pin_func, SYS_PINFUNC); + } +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + + /* Enable sys bus clock divider when IDLE state or no bus activity. */ + au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); + + /* Enable the RTC if not already enabled. */ + if (!(readb(base + 0x28) & 0x20)) { + writeb(readb(base + 0x28) | 0x20, base + 0x28); + au_sync(); + } + /* Put the clock in BCD mode. */ + if (readb(base + 0x2C) & 0x4) { /* reg B */ + writeb(readb(base + 0x2c) & ~0x4, base + 0x2c); + au_sync(); + } +} diff --git a/arch/mips/alchemy/pb1100/init.c b/arch/mips/alchemy/pb1100/init.c new file mode 100644 index 000000000000..7c6792308bc5 --- /dev/null +++ b/arch/mips/alchemy/pb1100/init.c @@ -0,0 +1,60 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Pb1100 board setup + * + * Copyright 2002, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include + +#include + +const char *get_system_type(void) +{ + return "Alchemy Pb1100"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg3; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtol(memsize_str, 0, &memsize); + + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/pb1100/irqmap.c b/arch/mips/alchemy/pb1100/irqmap.c new file mode 100644 index 000000000000..9b7dd8b41283 --- /dev/null +++ b/arch/mips/alchemy/pb1100/irqmap.c @@ -0,0 +1,40 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xx0 IRQ map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */ + { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */ + { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */ + { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */ +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/pb1200/Makefile b/arch/mips/alchemy/pb1200/Makefile new file mode 100644 index 000000000000..d678adf7ce85 --- /dev/null +++ b/arch/mips/alchemy/pb1200/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards. +# + +lib-y := init.o board_setup.o irqmap.o +obj-y += platform.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/pb1200/board_setup.c b/arch/mips/alchemy/pb1200/board_setup.c new file mode 100644 index 000000000000..6cb2115059ad --- /dev/null +++ b/arch/mips/alchemy/pb1200/board_setup.c @@ -0,0 +1,162 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Pb1200/Db1200 board setup. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include +#include + +extern void _board_init_irq(void); +extern void (*board_init_irq)(void); + +void board_reset(void) +{ + bcsr->resets = 0; + bcsr->system = 0; +} + +void __init board_setup(void) +{ + char *argptr = NULL; + +#if 0 + { + u32 pin_func; + + /* + * Enable PSC1 SYNC for AC97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ + au_sync(); + } +#endif + +#if defined(CONFIG_I2C_AU1550) + { + u32 freq0, clksrc; + u32 pin_func; + + /* Select SMBus in CPLD */ + bcsr->resets &= ~BCSR_RESETS_PCS0MUX; + + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + /* Set GPIOs correctly */ + pin_func |= 2 << 17; + au_writel(pin_func, SYS_PINFUNC); + au_sync(); + + /* The I2C driver depends on 50 MHz clock */ + freq0 = au_readl(SYS_FREQCTRL0); + au_sync(); + freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); + freq0 |= 3 << SYS_FC_FRDIV1_BIT; + /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + freq0 |= SYS_FC_FE1; + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + + clksrc = au_readl(SYS_CLKSRC); + au_sync(); + clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); + /* Bit 22 is EXTCLK0 for PSC0 */ + clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; + au_writel(clksrc, SYS_CLKSRC); + au_sync(); + } +#endif + +#ifdef CONFIG_FB_AU1200 + argptr = prom_getcmdline(); +#ifdef CONFIG_MIPS_PB1200 + strcat(argptr, " video=au1200fb:panel:bs"); +#endif +#ifdef CONFIG_MIPS_DB1200 + strcat(argptr, " video=au1200fb:panel:bs"); +#endif +#endif + + /* + * The Pb1200 development board uses external MUX for PSC0 to + * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI + */ +#ifdef CONFIG_I2C_AU1550 + bcsr->resets &= ~BCSR_RESETS_PCS0MUX; +#endif + au_sync(); + +#ifdef CONFIG_MIPS_PB1200 + printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1200 + printk(KERN_INFO "AMD Alchemy Db1200 Board\n"); +#endif + + /* Setup Pb1200 External Interrupt Controller */ + board_init_irq = _board_init_irq; +} + +int board_au1200fb_panel(void) +{ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + int p; + + p = bcsr->switches; + p >>= 8; + p &= 0x0F; + return p; +} + +int board_au1200fb_panel_init(void) +{ + /* Apply power */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + + bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL; + /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ + return 0; +} + +int board_au1200fb_panel_shutdown(void) +{ + /* Remove power */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + + bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); + /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ + return 0; +} diff --git a/arch/mips/alchemy/pb1200/init.c b/arch/mips/alchemy/pb1200/init.c new file mode 100644 index 000000000000..e9b2a0fd48ae --- /dev/null +++ b/arch/mips/alchemy/pb1200/init.c @@ -0,0 +1,58 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PB1200 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include + +#include + +const char *get_system_type(void) +{ + return "Alchemy Pb1200"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x08000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/pb1200/irqmap.c b/arch/mips/alchemy/pb1200/irqmap.c new file mode 100644 index 000000000000..2a505ad8715b --- /dev/null +++ b/arch/mips/alchemy/pb1200/irqmap.c @@ -0,0 +1,160 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include + +#ifdef CONFIG_MIPS_PB1200 +#include +#endif + +#ifdef CONFIG_MIPS_DB1200 +#include +#define PB1200_INT_BEGIN DB1200_INT_BEGIN +#define PB1200_INT_END DB1200_INT_END +#endif + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + /* This is external interrupt cascade */ + { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); + +/* + * Support for External interrupts on the Pb1200 Development platform. + */ +static volatile int pb1200_cascade_en; + +irqreturn_t pb1200_cascade_handler(int irq, void *dev_id) +{ + unsigned short bisr = bcsr->int_status; + int extirq_nr = 0; + + /* Clear all the edge interrupts. This has no effect on level. */ + bcsr->int_status = bisr; + for ( ; bisr; bisr &= bisr - 1) { + extirq_nr = PB1200_INT_BEGIN + __ffs(bisr); + /* Ack and dispatch IRQ */ + do_IRQ(extirq_nr); + } + + return IRQ_RETVAL(1); +} + +inline void pb1200_enable_irq(unsigned int irq_nr) +{ + bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN); + bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN); +} + +inline void pb1200_disable_irq(unsigned int irq_nr) +{ + bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN); + bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN); +} + +static unsigned int pb1200_setup_cascade(void) +{ + return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, + 0, "Pb1200 Cascade", &pb1200_cascade_handler); +} + +static unsigned int pb1200_startup_irq(unsigned int irq) +{ + if (++pb1200_cascade_en == 1) { + int res; + + res = pb1200_setup_cascade(); + if (res) + return res; + } + + pb1200_enable_irq(irq); + + return 0; +} + +static void pb1200_shutdown_irq(unsigned int irq) +{ + pb1200_disable_irq(irq); + if (--pb1200_cascade_en == 0) + free_irq(AU1000_GPIO_7, &pb1200_cascade_handler); +} + +static struct irq_chip external_irq_type = { +#ifdef CONFIG_MIPS_PB1200 + .name = "Pb1200 Ext", +#endif +#ifdef CONFIG_MIPS_DB1200 + .name = "Db1200 Ext", +#endif + .startup = pb1200_startup_irq, + .shutdown = pb1200_shutdown_irq, + .ack = pb1200_disable_irq, + .mask = pb1200_disable_irq, + .mask_ack = pb1200_disable_irq, + .unmask = pb1200_enable_irq, +}; + +void _board_init_irq(void) +{ + unsigned int irq; + +#ifdef CONFIG_MIPS_PB1200 + /* We have a problem with CPLD rev 3. */ + if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) { + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); + printk(KERN_ERR "updated to latest revision. This software will\n"); + printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + panic("Game over. Your score is 0."); + } +#endif + + for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) { + set_irq_chip_and_handler(irq, &external_irq_type, + handle_level_irq); + pb1200_disable_irq(irq); + } + + /* + * GPIO_7 can not be hooked here, so it is hooked upon first + * request of any source attached to the cascade. + */ +} diff --git a/arch/mips/alchemy/pb1200/platform.c b/arch/mips/alchemy/pb1200/platform.c new file mode 100644 index 000000000000..f8fb0aeac571 --- /dev/null +++ b/arch/mips/alchemy/pb1200/platform.c @@ -0,0 +1,85 @@ +/* + * Pb1200/DBAu1200 board platform device registration + * + * Copyright (C) 2008 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +#include + +static struct resource ide_resources[] = { + [0] = { + .start = IDE_PHYS_ADDR, + .end = IDE_PHYS_ADDR + IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = IDE_INT, + .end = IDE_INT, + .flags = IORESOURCE_IRQ + } +}; + +static u64 ide_dmamask = DMA_32BIT_MASK; + +static struct platform_device ide_device = { + .name = "au1200-ide", + .id = 0, + .dev = { + .dma_mask = &ide_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(ide_resources), + .resource = ide_resources +}; + +static struct resource smc91c111_resources[] = { + [0] = { + .name = "smc91x-regs", + .start = SMC91C111_PHYS_ADDR, + .end = SMC91C111_PHYS_ADDR + 0xf, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = SMC91C111_INT, + .end = SMC91C111_INT, + .flags = IORESOURCE_IRQ + }, +}; + +static struct platform_device smc91c111_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91c111_resources), + .resource = smc91c111_resources +}; + +static struct platform_device *board_platform_devices[] __initdata = { + &ide_device, + &smc91c111_device +}; + +static int __init board_register_devices(void) +{ + return platform_add_devices(board_platform_devices, + ARRAY_SIZE(board_platform_devices)); +} + +arch_initcall(board_register_devices); diff --git a/arch/mips/alchemy/pb1500/Makefile b/arch/mips/alchemy/pb1500/Makefile new file mode 100644 index 000000000000..602f38df20bb --- /dev/null +++ b/arch/mips/alchemy/pb1500/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2001, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# +# Makefile for the Alchemy Semiconductor Pb1500 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/pb1500/board_setup.c b/arch/mips/alchemy/pb1500/board_setup.c new file mode 100644 index 000000000000..035771c6e5b8 --- /dev/null +++ b/arch/mips/alchemy/pb1500/board_setup.c @@ -0,0 +1,119 @@ +/* + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include +#include + +void board_reset(void) +{ + /* Hit BCSR.RST_VDDI[SOFT_RESET] */ + au_writel(0x00000000, PB1500_RST_VDDI); +} + +void __init board_setup(void) +{ + u32 pin_func; + u32 sys_freqctrl, sys_clksrc; + + sys_clksrc = sys_freqctrl = pin_func = 0; + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ + au_writel(8, SYS_AUXPLL); + au_writel(0, SYS_PINSTATERD); + udelay(100); + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + + /* GPIO201 is input for PCMCIA card detect */ + /* GPIO203 is input for PCMCIA interrupt request */ + au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR); + + /* Zero and disable FREQ2 */ + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* zero and disable USBH/USBD clocks */ + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); + au_writel(sys_clksrc, SYS_CLKSRC); + + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); + + /* FREQ2 = aux/2 = 48 MHz */ + sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2 | SYS_FC_FS2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* + * Route 48MHz FREQ2 into USB Host and/or Device + */ + sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT; + au_writel(sys_clksrc, SYS_CLKSRC); + + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB; + /* 2nd USB port is USB host */ + pin_func |= SYS_PF_USB; + au_writel(pin_func, SYS_PINFUNC); +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + +#ifdef CONFIG_PCI + /* Setup PCI bus controller */ + au_writel(0, Au1500_PCI_CMEM); + au_writel(0x00003fff, Au1500_CFG_BASE); +#if defined(__MIPSEB__) + au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); +#else + au_writel(0xf, Au1500_PCI_CFG); +#endif + au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); + au_writel(0, Au1500_PCI_MWBASE_REV_CCL); + au_writel(0x02a00356, Au1500_PCI_STATCMD); + au_writel(0x00003c04, Au1500_PCI_HDRTYPE); + au_writel(0x00000008, Au1500_PCI_MBAR); + au_sync(); +#endif + + /* Enable sys bus clock divider when IDLE state or no bus activity. */ + au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); + + /* Enable the RTC if not already enabled */ + if (!(au_readl(0xac000028) & 0x20)) { + printk(KERN_INFO "enabling clock ...\n"); + au_writel((au_readl(0xac000028) | 0x20), 0xac000028); + } + /* Put the clock in BCD mode */ + if (au_readl(0xac00002c) & 0x4) { /* reg B */ + au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c); + au_sync(); + } +} diff --git a/arch/mips/alchemy/pb1500/init.c b/arch/mips/alchemy/pb1500/init.c new file mode 100644 index 000000000000..3b6e395cf952 --- /dev/null +++ b/arch/mips/alchemy/pb1500/init.c @@ -0,0 +1,58 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Pb1500 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include + +#include + +const char *get_system_type(void) +{ + return "Alchemy Pb1500"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/pb1500/irqmap.c b/arch/mips/alchemy/pb1500/irqmap.c new file mode 100644 index 000000000000..39c4682766a8 --- /dev/null +++ b/arch/mips/alchemy/pb1500/irqmap.c @@ -0,0 +1,46 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include + +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ +}; + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, + { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/pb1550/Makefile b/arch/mips/alchemy/pb1550/Makefile new file mode 100644 index 000000000000..7d8beca87fa5 --- /dev/null +++ b/arch/mips/alchemy/pb1550/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# +# Makefile for the Alchemy Semiconductor Pb1550 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/pb1550/board_setup.c b/arch/mips/alchemy/pb1550/board_setup.c new file mode 100644 index 000000000000..0ed76b64b6ab --- /dev/null +++ b/arch/mips/alchemy/pb1550/board_setup.c @@ -0,0 +1,58 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Pb1550 board setup. + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include +#include + +void board_reset(void) +{ + /* Hit BCSR.SYSTEM[RESET] */ + au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C); +} + +void __init board_setup(void) +{ + u32 pin_func; + + /* + * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ + au_sync(); + + printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); +} diff --git a/arch/mips/alchemy/pb1550/init.c b/arch/mips/alchemy/pb1550/init.c new file mode 100644 index 000000000000..e1055a13a1a0 --- /dev/null +++ b/arch/mips/alchemy/pb1550/init.c @@ -0,0 +1,58 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Pb1550 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include + +#include + +const char *get_system_type(void) +{ + return "Alchemy Pb1550"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x08000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/pb1550/irqmap.c b/arch/mips/alchemy/pb1550/irqmap.c new file mode 100644 index 000000000000..a02a4d1fa899 --- /dev/null +++ b/arch/mips/alchemy/pb1550/irqmap.c @@ -0,0 +1,43 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xx0 IRQ map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include + +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ +}; + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile new file mode 100644 index 000000000000..db3c526f64d8 --- /dev/null +++ b/arch/mips/alchemy/xxs1500/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2003 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# +# Makefile for MyCable XXS1500 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c new file mode 100644 index 000000000000..4c587acac5c3 --- /dev/null +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -0,0 +1,79 @@ +/* + * Copyright 2000-2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include + +void board_reset(void) +{ + /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ + au_writel(0x00000000, 0xAE00001C); +} + +void __init board_setup(void) +{ + u32 pin_func; + + /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; + pin_func |= SYS_PF_UR3; + au_writel(pin_func, SYS_PINFUNC); + + /* Enable UART */ + au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */ + mdelay(10); + au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ + mdelay(10); + + /* Enable DTR = USB power up */ + au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */ + +#ifdef CONFIG_PCMCIA_XXS1500 + /* Setup PCMCIA signals */ + au_writel(0, SYS_PININPUTEN); + + /* GPIO 0, 1, and 4 are inputs */ + au_writel(1 | (1 << 1) | (1 << 4), SYS_TRIOUTCLR); + + /* Enable GPIO2 if not already enabled */ + au_writel(1, GPIO2_ENABLE); + /* GPIO2 208/9/10/11 are inputs */ + au_writel((1 << 8) | (1 << 9) | (1 << 10) | (1 << 11), GPIO2_DIR); + + /* Turn off power */ + au_writel((au_readl(GPIO2_PINSTATE) & ~(1 << 14)) | (1 << 30), + GPIO2_OUTPUT); +#endif + +#ifdef CONFIG_PCI +#if defined(__MIPSEB__) + au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); +#else + au_writel(0xf, Au1500_PCI_CFG); +#endif +#endif +} diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c new file mode 100644 index 000000000000..7516434760a1 --- /dev/null +++ b/arch/mips/alchemy/xxs1500/init.c @@ -0,0 +1,58 @@ +/* + * BRIEF MODULE DESCRIPTION + * XXS1500 board setup + * + * Copyright 2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#include + +#include + +const char *get_system_type(void) +{ + return "XXS1500"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtol(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/xxs1500/irqmap.c b/arch/mips/alchemy/xxs1500/irqmap.c new file mode 100644 index 000000000000..edf06ed11870 --- /dev/null +++ b/arch/mips/alchemy/xxs1500/irqmap.c @@ -0,0 +1,49 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, + { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 }, + + { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */ + { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig deleted file mode 100644 index e4a057d80ab6..000000000000 --- a/arch/mips/au1000/Kconfig +++ /dev/null @@ -1,136 +0,0 @@ -choice - prompt "Machine type" - depends on MACH_ALCHEMY - default MIPS_DB1000 - -config MIPS_MTX1 - bool "4G Systems MTX-1 board" - select DMA_NONCOHERENT - select HW_HAS_PCI - select SOC_AU1500 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_BOSPORUS - bool "Alchemy Bosporus board" - select SOC_AU1500 - select DMA_NONCOHERENT - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1000 - bool "Alchemy DB1000 board" - select SOC_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1100 - bool "Alchemy DB1100 board" - select SOC_AU1100 - select DMA_NONCOHERENT - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1200 - bool "Alchemy DB1200 board" - select SOC_AU1200 - select DMA_COHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1500 - bool "Alchemy DB1500 board" - select SOC_AU1500 - select DMA_NONCOHERENT - select HW_HAS_PCI - select MIPS_DISABLE_OBSOLETE_IDE - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_DB1550 - bool "Alchemy DB1550 board" - select SOC_AU1550 - select HW_HAS_PCI - select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_MIRAGE - bool "Alchemy Mirage board" - select DMA_NONCOHERENT - select SOC_AU1500 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1000 - bool "Alchemy PB1000 board" - select SOC_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI - select SWAP_IO_SPACE - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1100 - bool "Alchemy PB1100 board" - select SOC_AU1100 - select DMA_NONCOHERENT - select HW_HAS_PCI - select SWAP_IO_SPACE - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1200 - bool "Alchemy PB1200 board" - select SOC_AU1200 - select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1500 - bool "Alchemy PB1500 board" - select SOC_AU1500 - select DMA_NONCOHERENT - select HW_HAS_PCI - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_PB1550 - bool "Alchemy PB1550 board" - select SOC_AU1550 - select DMA_NONCOHERENT - select HW_HAS_PCI - select MIPS_DISABLE_OBSOLETE_IDE - select SYS_SUPPORTS_LITTLE_ENDIAN - -config MIPS_XXS1500 - bool "MyCable XXS1500 board" - select DMA_NONCOHERENT - select SOC_AU1500 - select SYS_SUPPORTS_LITTLE_ENDIAN - -endchoice - -config SOC_AU1000 - bool - select SOC_AU1X00 - -config SOC_AU1100 - bool - select SOC_AU1X00 - -config SOC_AU1500 - bool - select SOC_AU1X00 - -config SOC_AU1550 - bool - select SOC_AU1X00 - -config SOC_AU1200 - bool - select SOC_AU1X00 - -config SOC_AU1X00 - bool - select 64BIT_PHYS_ADDR - select CEVT_R4K - select CSRC_R4K - select IRQ_CPU - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_APM_EMULATION diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile deleted file mode 100644 index df48fd65bbf3..000000000000 --- a/arch/mips/au1000/common/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# Copyright 2000, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for the Alchemy Au1xx0 CPUs, generic files. -# - -obj-y += prom.o irq.o puts.o time.o reset.o \ - au1xxx_irqmap.o clocks.o platform.o power.o setup.o \ - sleeper.o cputable.o dma.o dbdma.o gpio.o - -obj-$(CONFIG_PCI) += pci.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c deleted file mode 100644 index c7ca1596394c..000000000000 --- a/arch/mips/au1000/common/au1xxx_irqmap.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx processor specific IRQ tables - * - * Copyright 2004 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include - -#include - -/* The IC0 interrupt table. This is processor, rather than - * board dependent, so no reason to keep this info in the board - * dependent files. - * - * Careful if you change match 2 request! - * The interrupt handler is called directly from the low level dispatch code. - */ -struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = { - -#if defined(CONFIG_SOC_AU1000) - { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, - { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 }, - -#elif defined(CONFIG_SOC_AU1500) - - { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, - { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 }, - -#elif defined(CONFIG_SOC_AU1100) - - { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, - { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, - /* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */ - { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 }, - -#elif defined(CONFIG_SOC_AU1550) - - { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 }, - { AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 }, - { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 }, - { AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 }, - { AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 }, - { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, - { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 }, - { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 }, - -#elif defined(CONFIG_SOC_AU1200) - - { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, - { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 }, - -#else -#error "Error: Unknown Alchemy SOC" -#endif - -}; - -int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map); diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c deleted file mode 100644 index 043429d17c5f..000000000000 --- a/arch/mips/au1000/common/clocks.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Simple Au1xx0 clocks routines. - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -static unsigned int au1x00_clock; /* Hz */ -static unsigned int lcd_clock; /* KHz */ -static unsigned long uart_baud_base; - -/* - * Set the au1000_clock - */ -void set_au1x00_speed(unsigned int new_freq) -{ - au1x00_clock = new_freq; -} - -unsigned int get_au1x00_speed(void) -{ - return au1x00_clock; -} -EXPORT_SYMBOL(get_au1x00_speed); - -/* - * The UART baud base is not known at compile time ... if - * we want to be able to use the same code on different - * speed CPUs. - */ -unsigned long get_au1x00_uart_baud_base(void) -{ - return uart_baud_base; -} - -void set_au1x00_uart_baud_base(unsigned long new_baud_base) -{ - uart_baud_base = new_baud_base; -} - -/* - * Calculate the Au1x00's LCD clock based on the current - * cpu clock and the system bus clock, and try to keep it - * below 40 MHz (the Pb1000 board can lock-up if the LCD - * clock is over 40 MHz). - */ -void set_au1x00_lcd_clock(void) -{ - unsigned int static_cfg0; - unsigned int sys_busclk = (get_au1x00_speed() / 1000) / - ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2); - - static_cfg0 = au_readl(MEM_STCFG0); - - if (static_cfg0 & (1 << 11)) - lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */ - else - lcd_clock = sys_busclk / 4; - - if (lcd_clock > 50000) /* Epson MAX */ - printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n", - lcd_clock); -} - -unsigned int get_au1x00_lcd_clock(void) -{ - return lcd_clock; -} -EXPORT_SYMBOL(get_au1x00_lcd_clock); diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c deleted file mode 100644 index ba6430bc2d03..000000000000 --- a/arch/mips/au1000/common/cputable.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * arch/mips/au1000/common/cputable.c - * - * Copyright (C) 2004 Dan Malek (dan@embeddededge.com) - * Copied from PowerPC and updated for Alchemy Au1xxx processors. - * - * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include - -struct cpu_spec *cur_cpu_spec[NR_CPUS]; - -/* With some thought, we can probably use the mask to reduce the - * size of the table. - */ -struct cpu_spec cpu_specs[] = { - { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 }, - { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 }, - { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 }, - { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 }, - { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 }, - { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 }, - { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 }, - { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 }, - { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 }, - { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 }, - { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 }, - { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 }, - { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 }, - { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 }, - { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 }, - { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 }, - { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 } -}; - -void set_cpuspec(void) -{ - struct cpu_spec *sp; - u32 prid; - - prid = read_c0_prid(); - sp = cpu_specs; - while ((prid & sp->prid_mask) != sp->prid_value) - sp++; - cur_cpu_spec[0] = sp; -} diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c deleted file mode 100644 index 601ee9180ee4..000000000000 --- a/arch/mips/au1000/common/dbdma.c +++ /dev/null @@ -1,978 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * The Descriptor Based DMA channel manager that first appeared - * on the Au1550. I started with dma.c, but I think all that is - * left is this initial comment :-) - * - * Copyright 2004 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) - -/* - * The Descriptor Based DMA supports up to 16 channels. - * - * There are 32 devices defined. We keep an internal structure - * of devices using these channels, along with additional - * information. - * - * We allocate the descriptors and allow access to them through various - * functions. The drivers allocate the data buffers and assign them - * to the descriptors. - */ -static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); - -/* I couldn't find a macro that did this... */ -#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1)) - -static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; -static int dbdma_initialized; -static void au1xxx_dbdma_init(void); - -static dbdev_tab_t dbdev_tab[] = { -#ifdef CONFIG_SOC_AU1550 - /* UARTS */ - { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, - { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, - { DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 }, - { DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 }, - - /* EXT DMA */ - { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 }, - - /* USB DEV */ - { DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 }, - { DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 }, - { DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 }, - { DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 }, - { DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 }, - { DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 }, - - /* PSC 0 */ - { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 }, - { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 }, - - /* PSC 1 */ - { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 }, - { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 }, - - /* PSC 2 */ - { DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 }, - { DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 }, - - /* PSC 3 */ - { DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 }, - { DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 }, - - { DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */ - { DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */ - - /* MAC 0 */ - { DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, - - /* MAC 1 */ - { DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, - -#endif /* CONFIG_SOC_AU1550 */ - -#ifdef CONFIG_SOC_AU1200 - { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 }, - { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 }, - { DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 }, - { DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 }, - - { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, - - { DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - - { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, - { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, - { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 }, - { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 }, - - { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, - { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, - - { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 }, - { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 }, - { DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - - { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 }, - { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 }, - { DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - - { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 }, - { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 }, - { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 }, - { DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - - { DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - -#endif /* CONFIG_SOC_AU1200 */ - - { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - - /* Provide 16 user definable device types */ - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, - { ~0, 0, 0, 0, 0, 0, 0 }, -}; - -#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab) - -static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS]; - -static dbdev_tab_t *find_dbdev_id(u32 id) -{ - int i; - dbdev_tab_t *p; - for (i = 0; i < DBDEV_TAB_SIZE; ++i) { - p = &dbdev_tab[i]; - if (p->dev_id == id) - return p; - } - return NULL; -} - -void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp) -{ - return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); -} -EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt); - -u32 au1xxx_ddma_add_device(dbdev_tab_t *dev) -{ - u32 ret = 0; - dbdev_tab_t *p; - static u16 new_id = 0x1000; - - p = find_dbdev_id(~0); - if (NULL != p) { - memcpy(p, dev, sizeof(dbdev_tab_t)); - p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id); - ret = p->dev_id; - new_id++; -#if 0 - printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n", - p->dev_id, p->dev_flags, p->dev_physaddr); -#endif - } - - return ret; -} -EXPORT_SYMBOL(au1xxx_ddma_add_device); - -void au1xxx_ddma_del_device(u32 devid) -{ - dbdev_tab_t *p = find_dbdev_id(devid); - - if (p != NULL) { - memset(p, 0, sizeof(dbdev_tab_t)); - p->dev_id = ~0; - } -} -EXPORT_SYMBOL(au1xxx_ddma_del_device); - -/* Allocate a channel and return a non-zero descriptor if successful. */ -u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, - void (*callback)(int, void *), void *callparam) -{ - unsigned long flags; - u32 used, chan, rv; - u32 dcp; - int i; - dbdev_tab_t *stp, *dtp; - chan_tab_t *ctp; - au1x_dma_chan_t *cp; - - /* - * We do the intialization on the first channel allocation. - * We have to wait because of the interrupt handler initialization - * which can't be done successfully during board set up. - */ - if (!dbdma_initialized) - au1xxx_dbdma_init(); - dbdma_initialized = 1; - - stp = find_dbdev_id(srcid); - if (stp == NULL) - return 0; - dtp = find_dbdev_id(destid); - if (dtp == NULL) - return 0; - - used = 0; - rv = 0; - - /* Check to see if we can get both channels. */ - spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); - if (!(stp->dev_flags & DEV_FLAGS_INUSE) || - (stp->dev_flags & DEV_FLAGS_ANYUSE)) { - /* Got source */ - stp->dev_flags |= DEV_FLAGS_INUSE; - if (!(dtp->dev_flags & DEV_FLAGS_INUSE) || - (dtp->dev_flags & DEV_FLAGS_ANYUSE)) { - /* Got destination */ - dtp->dev_flags |= DEV_FLAGS_INUSE; - } else { - /* Can't get dest. Release src. */ - stp->dev_flags &= ~DEV_FLAGS_INUSE; - used++; - } - } else - used++; - spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); - - if (!used) { - /* Let's see if we can allocate a channel for it. */ - ctp = NULL; - chan = 0; - spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); - for (i = 0; i < NUM_DBDMA_CHANS; i++) - if (chan_tab_ptr[i] == NULL) { - /* - * If kmalloc fails, it is caught below same - * as a channel not available. - */ - ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC); - chan_tab_ptr[i] = ctp; - break; - } - spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); - - if (ctp != NULL) { - memset(ctp, 0, sizeof(chan_tab_t)); - ctp->chan_index = chan = i; - dcp = DDMA_CHANNEL_BASE; - dcp += (0x0100 * chan); - ctp->chan_ptr = (au1x_dma_chan_t *)dcp; - cp = (au1x_dma_chan_t *)dcp; - ctp->chan_src = stp; - ctp->chan_dest = dtp; - ctp->chan_callback = callback; - ctp->chan_callparam = callparam; - - /* Initialize channel configuration. */ - i = 0; - if (stp->dev_intlevel) - i |= DDMA_CFG_SED; - if (stp->dev_intpolarity) - i |= DDMA_CFG_SP; - if (dtp->dev_intlevel) - i |= DDMA_CFG_DED; - if (dtp->dev_intpolarity) - i |= DDMA_CFG_DP; - if ((stp->dev_flags & DEV_FLAGS_SYNC) || - (dtp->dev_flags & DEV_FLAGS_SYNC)) - i |= DDMA_CFG_SYNC; - cp->ddma_cfg = i; - au_sync(); - - /* Return a non-zero value that can be used to - * find the channel information in subsequent - * operations. - */ - rv = (u32)(&chan_tab_ptr[chan]); - } else { - /* Release devices */ - stp->dev_flags &= ~DEV_FLAGS_INUSE; - dtp->dev_flags &= ~DEV_FLAGS_INUSE; - } - } - return rv; -} -EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc); - -/* - * Set the device width if source or destination is a FIFO. - * Should be 8, 16, or 32 bits. - */ -u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits) -{ - u32 rv; - chan_tab_t *ctp; - dbdev_tab_t *stp, *dtp; - - ctp = *((chan_tab_t **)chanid); - stp = ctp->chan_src; - dtp = ctp->chan_dest; - rv = 0; - - if (stp->dev_flags & DEV_FLAGS_IN) { /* Source in fifo */ - rv = stp->dev_devwidth; - stp->dev_devwidth = bits; - } - if (dtp->dev_flags & DEV_FLAGS_OUT) { /* Destination out fifo */ - rv = dtp->dev_devwidth; - dtp->dev_devwidth = bits; - } - - return rv; -} -EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth); - -/* Allocate a descriptor ring, initializing as much as possible. */ -u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries) -{ - int i; - u32 desc_base, srcid, destid; - u32 cmd0, cmd1, src1, dest1; - u32 src0, dest0; - chan_tab_t *ctp; - dbdev_tab_t *stp, *dtp; - au1x_ddma_desc_t *dp; - - /* - * I guess we could check this to be within the - * range of the table...... - */ - ctp = *((chan_tab_t **)chanid); - stp = ctp->chan_src; - dtp = ctp->chan_dest; - - /* - * The descriptors must be 32-byte aligned. There is a - * possibility the allocation will give us such an address, - * and if we try that first we are likely to not waste larger - * slabs of memory. - */ - desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), - GFP_KERNEL|GFP_DMA); - if (desc_base == 0) - return 0; - - if (desc_base & 0x1f) { - /* - * Lost....do it again, allocate extra, and round - * the address base. - */ - kfree((const void *)desc_base); - i = entries * sizeof(au1x_ddma_desc_t); - i += (sizeof(au1x_ddma_desc_t) - 1); - desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA); - if (desc_base == 0) - return 0; - - desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t)); - } - dp = (au1x_ddma_desc_t *)desc_base; - - /* Keep track of the base descriptor. */ - ctp->chan_desc_base = dp; - - /* Initialize the rings with as much information as we know. */ - srcid = stp->dev_id; - destid = dtp->dev_id; - - cmd0 = cmd1 = src1 = dest1 = 0; - src0 = dest0 = 0; - - cmd0 |= DSCR_CMD0_SID(srcid); - cmd0 |= DSCR_CMD0_DID(destid); - cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV; - cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE); - - /* Is it mem to mem transfer? */ - if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || - (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) && - ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || - (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) - cmd0 |= DSCR_CMD0_MEM; - - switch (stp->dev_devwidth) { - case 8: - cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_BYTE); - break; - case 16: - cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_HALFWORD); - break; - case 32: - default: - cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_WORD); - break; - } - - switch (dtp->dev_devwidth) { - case 8: - cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_BYTE); - break; - case 16: - cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_HALFWORD); - break; - case 32: - default: - cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_WORD); - break; - } - - /* - * If the device is marked as an in/out FIFO, ensure it is - * set non-coherent. - */ - if (stp->dev_flags & DEV_FLAGS_IN) - cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */ - if (dtp->dev_flags & DEV_FLAGS_OUT) - cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */ - - /* - * Set up source1. For now, assume no stride and increment. - * A channel attribute update can change this later. - */ - switch (stp->dev_tsize) { - case 1: - src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE1); - break; - case 2: - src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE2); - break; - case 4: - src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE4); - break; - case 8: - default: - src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE8); - break; - } - - /* If source input is FIFO, set static address. */ - if (stp->dev_flags & DEV_FLAGS_IN) { - if (stp->dev_flags & DEV_FLAGS_BURSTABLE) - src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST); - else - src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC); - } - - if (stp->dev_physaddr) - src0 = stp->dev_physaddr; - - /* - * Set up dest1. For now, assume no stride and increment. - * A channel attribute update can change this later. - */ - switch (dtp->dev_tsize) { - case 1: - dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE1); - break; - case 2: - dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE2); - break; - case 4: - dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE4); - break; - case 8: - default: - dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE8); - break; - } - - /* If destination output is FIFO, set static address. */ - if (dtp->dev_flags & DEV_FLAGS_OUT) { - if (dtp->dev_flags & DEV_FLAGS_BURSTABLE) - dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST); - else - dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC); - } - - if (dtp->dev_physaddr) - dest0 = dtp->dev_physaddr; - -#if 0 - printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x " - "source1:%x dest0:%x dest1:%x\n", - dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, - src1, dest0, dest1); -#endif - for (i = 0; i < entries; i++) { - dp->dscr_cmd0 = cmd0; - dp->dscr_cmd1 = cmd1; - dp->dscr_source0 = src0; - dp->dscr_source1 = src1; - dp->dscr_dest0 = dest0; - dp->dscr_dest1 = dest1; - dp->dscr_stat = 0; - dp->sw_context = 0; - dp->sw_status = 0; - dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1)); - dp++; - } - - /* Make last descrptor point to the first. */ - dp--; - dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base)); - ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base; - - return (u32)ctp->chan_desc_base; -} -EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); - -/* - * Put a source buffer into the DMA ring. - * This updates the source pointer and byte count. Normally used - * for memory to fifo transfers. - */ -u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) -{ - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; - - /* - * I guess we could check this to be within the - * range of the table...... - */ - ctp = *(chan_tab_t **)chanid; - - /* - * We should have multiple callers for a particular channel, - * an interrupt doesn't affect this pointer nor the descriptor, - * so no locking should be needed. - */ - dp = ctp->put_ptr; - - /* - * If the descriptor is valid, we are way ahead of the DMA - * engine, so just return an error condition. - */ - if (dp->dscr_cmd0 & DSCR_CMD0_V) - return 0; - - /* Load up buffer address and byte count. */ - dp->dscr_source0 = virt_to_phys(buf); - dp->dscr_cmd1 = nbytes; - /* Check flags */ - if (flags & DDMA_FLAGS_IE) - dp->dscr_cmd0 |= DSCR_CMD0_IE; - if (flags & DDMA_FLAGS_NOIE) - dp->dscr_cmd0 &= ~DSCR_CMD0_IE; - - /* - * There is an errata on the Au1200/Au1550 parts that could result - * in "stale" data being DMA'ed. It has to do with the snoop logic on - * the cache eviction buffer. DMA_NONCOHERENT is on by default for - * these parts. If it is fixed in the future, these dma_cache_inv will - * just be nothing more than empty macros. See io.h. - */ - dma_cache_wback_inv((unsigned long)buf, nbytes); - dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ - au_sync(); - dma_cache_wback_inv((unsigned long)dp, sizeof(dp)); - ctp->chan_ptr->ddma_dbell = 0; - - /* Get next descriptor pointer. */ - ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - - /* Return something non-zero. */ - return nbytes; -} -EXPORT_SYMBOL(_au1xxx_dbdma_put_source); - -/* Put a destination buffer into the DMA ring. - * This updates the destination pointer and byte count. Normally used - * to place an empty buffer into the ring for fifo to memory transfers. - */ -u32 -_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) -{ - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; - - /* I guess we could check this to be within the - * range of the table...... - */ - ctp = *((chan_tab_t **)chanid); - - /* We should have multiple callers for a particular channel, - * an interrupt doesn't affect this pointer nor the descriptor, - * so no locking should be needed. - */ - dp = ctp->put_ptr; - - /* If the descriptor is valid, we are way ahead of the DMA - * engine, so just return an error condition. - */ - if (dp->dscr_cmd0 & DSCR_CMD0_V) - return 0; - - /* Load up buffer address and byte count */ - - /* Check flags */ - if (flags & DDMA_FLAGS_IE) - dp->dscr_cmd0 |= DSCR_CMD0_IE; - if (flags & DDMA_FLAGS_NOIE) - dp->dscr_cmd0 &= ~DSCR_CMD0_IE; - - dp->dscr_dest0 = virt_to_phys(buf); - dp->dscr_cmd1 = nbytes; -#if 0 - printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", - dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0, - dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); -#endif - /* - * There is an errata on the Au1200/Au1550 parts that could result in - * "stale" data being DMA'ed. It has to do with the snoop logic on the - * cache eviction buffer. DMA_NONCOHERENT is on by default for these - * parts. If it is fixed in the future, these dma_cache_inv will just - * be nothing more than empty macros. See io.h. - */ - dma_cache_inv((unsigned long)buf, nbytes); - dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ - au_sync(); - dma_cache_wback_inv((unsigned long)dp, sizeof(dp)); - ctp->chan_ptr->ddma_dbell = 0; - - /* Get next descriptor pointer. */ - ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - - /* Return something non-zero. */ - return nbytes; -} -EXPORT_SYMBOL(_au1xxx_dbdma_put_dest); - -/* - * Get a destination buffer into the DMA ring. - * Normally used to get a full buffer from the ring during fifo - * to memory transfers. This does not set the valid bit, you will - * have to put another destination buffer to keep the DMA going. - */ -u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes) -{ - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; - u32 rv; - - /* - * I guess we could check this to be within the - * range of the table...... - */ - ctp = *((chan_tab_t **)chanid); - - /* - * We should have multiple callers for a particular channel, - * an interrupt doesn't affect this pointer nor the descriptor, - * so no locking should be needed. - */ - dp = ctp->get_ptr; - - /* - * If the descriptor is valid, we are way ahead of the DMA - * engine, so just return an error condition. - */ - if (dp->dscr_cmd0 & DSCR_CMD0_V) - return 0; - - /* Return buffer address and byte count. */ - *buf = (void *)(phys_to_virt(dp->dscr_dest0)); - *nbytes = dp->dscr_cmd1; - rv = dp->dscr_stat; - - /* Get next descriptor pointer. */ - ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - - /* Return something non-zero. */ - return rv; -} -EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest); - -void au1xxx_dbdma_stop(u32 chanid) -{ - chan_tab_t *ctp; - au1x_dma_chan_t *cp; - int halt_timeout = 0; - - ctp = *((chan_tab_t **)chanid); - - cp = ctp->chan_ptr; - cp->ddma_cfg &= ~DDMA_CFG_EN; /* Disable channel */ - au_sync(); - while (!(cp->ddma_stat & DDMA_STAT_H)) { - udelay(1); - halt_timeout++; - if (halt_timeout > 100) { - printk(KERN_WARNING "warning: DMA channel won't halt\n"); - break; - } - } - /* clear current desc valid and doorbell */ - cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V); - au_sync(); -} -EXPORT_SYMBOL(au1xxx_dbdma_stop); - -/* - * Start using the current descriptor pointer. If the DBDMA encounters - * a non-valid descriptor, it will stop. In this case, we can just - * continue by adding a buffer to the list and starting again. - */ -void au1xxx_dbdma_start(u32 chanid) -{ - chan_tab_t *ctp; - au1x_dma_chan_t *cp; - - ctp = *((chan_tab_t **)chanid); - cp = ctp->chan_ptr; - cp->ddma_desptr = virt_to_phys(ctp->cur_ptr); - cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */ - au_sync(); - cp->ddma_dbell = 0; - au_sync(); -} -EXPORT_SYMBOL(au1xxx_dbdma_start); - -void au1xxx_dbdma_reset(u32 chanid) -{ - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; - - au1xxx_dbdma_stop(chanid); - - ctp = *((chan_tab_t **)chanid); - ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base; - - /* Run through the descriptors and reset the valid indicator. */ - dp = ctp->chan_desc_base; - - do { - dp->dscr_cmd0 &= ~DSCR_CMD0_V; - /* - * Reset our software status -- this is used to determine - * if a descriptor is in use by upper level software. Since - * posting can reset 'V' bit. - */ - dp->sw_status = 0; - dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - } while (dp != ctp->chan_desc_base); -} -EXPORT_SYMBOL(au1xxx_dbdma_reset); - -u32 au1xxx_get_dma_residue(u32 chanid) -{ - chan_tab_t *ctp; - au1x_dma_chan_t *cp; - u32 rv; - - ctp = *((chan_tab_t **)chanid); - cp = ctp->chan_ptr; - - /* This is only valid if the channel is stopped. */ - rv = cp->ddma_bytecnt; - au_sync(); - - return rv; -} -EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue); - -void au1xxx_dbdma_chan_free(u32 chanid) -{ - chan_tab_t *ctp; - dbdev_tab_t *stp, *dtp; - - ctp = *((chan_tab_t **)chanid); - stp = ctp->chan_src; - dtp = ctp->chan_dest; - - au1xxx_dbdma_stop(chanid); - - kfree((void *)ctp->chan_desc_base); - - stp->dev_flags &= ~DEV_FLAGS_INUSE; - dtp->dev_flags &= ~DEV_FLAGS_INUSE; - chan_tab_ptr[ctp->chan_index] = NULL; - - kfree(ctp); -} -EXPORT_SYMBOL(au1xxx_dbdma_chan_free); - -static irqreturn_t dbdma_interrupt(int irq, void *dev_id) -{ - u32 intstat; - u32 chan_index; - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; - au1x_dma_chan_t *cp; - - intstat = dbdma_gptr->ddma_intstat; - au_sync(); - chan_index = __ffs(intstat); - - ctp = chan_tab_ptr[chan_index]; - cp = ctp->chan_ptr; - dp = ctp->cur_ptr; - - /* Reset interrupt. */ - cp->ddma_irq = 0; - au_sync(); - - if (ctp->chan_callback) - ctp->chan_callback(irq, ctp->chan_callparam); - - ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - return IRQ_RETVAL(1); -} - -static void au1xxx_dbdma_init(void) -{ - int irq_nr; - - dbdma_gptr->ddma_config = 0; - dbdma_gptr->ddma_throttle = 0; - dbdma_gptr->ddma_inten = 0xffff; - au_sync(); - -#if defined(CONFIG_SOC_AU1550) - irq_nr = AU1550_DDMA_INT; -#elif defined(CONFIG_SOC_AU1200) - irq_nr = AU1200_DDMA_INT; -#else - #error Unknown Au1x00 SOC -#endif - - if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED, - "Au1xxx dbdma", (void *)dbdma_gptr)) - printk(KERN_ERR "Can't get 1550 dbdma irq"); -} - -void au1xxx_dbdma_dump(u32 chanid) -{ - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; - dbdev_tab_t *stp, *dtp; - au1x_dma_chan_t *cp; - u32 i = 0; - - ctp = *((chan_tab_t **)chanid); - stp = ctp->chan_src; - dtp = ctp->chan_dest; - cp = ctp->chan_ptr; - - printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n", - (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, - dtp - dbdev_tab); - printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n", - (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr), - (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr)); - - printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp); - printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n", - cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr); - printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n", - cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat, - cp->ddma_bytecnt); - - /* Run through the descriptors */ - dp = ctp->chan_desc_base; - - do { - printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n", - i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); - printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n", - dp->dscr_source0, dp->dscr_source1, - dp->dscr_dest0, dp->dscr_dest1); - printk(KERN_DEBUG "stat %08x, nxtptr %08x\n", - dp->dscr_stat, dp->dscr_nxtptr); - dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - } while (dp != ctp->chan_desc_base); -} - -/* Put a descriptor into the DMA ring. - * This updates the source/destination pointers and byte count. - */ -u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr) -{ - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; - u32 nbytes = 0; - - /* - * I guess we could check this to be within the - * range of the table...... - */ - ctp = *((chan_tab_t **)chanid); - - /* - * We should have multiple callers for a particular channel, - * an interrupt doesn't affect this pointer nor the descriptor, - * so no locking should be needed. - */ - dp = ctp->put_ptr; - - /* - * If the descriptor is valid, we are way ahead of the DMA - * engine, so just return an error condition. - */ - if (dp->dscr_cmd0 & DSCR_CMD0_V) - return 0; - - /* Load up buffer addresses and byte count. */ - dp->dscr_dest0 = dscr->dscr_dest0; - dp->dscr_source0 = dscr->dscr_source0; - dp->dscr_dest1 = dscr->dscr_dest1; - dp->dscr_source1 = dscr->dscr_source1; - dp->dscr_cmd1 = dscr->dscr_cmd1; - nbytes = dscr->dscr_cmd1; - /* Allow the caller to specifiy if an interrupt is generated */ - dp->dscr_cmd0 &= ~DSCR_CMD0_IE; - dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V; - ctp->chan_ptr->ddma_dbell = 0; - - /* Get next descriptor pointer. */ - ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - - /* Return something non-zero. */ - return nbytes; -} - -#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */ diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c deleted file mode 100644 index d6fbda232e6a..000000000000 --- a/arch/mips/au1000/common/dma.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * A DMA channel allocator for Au1x00. API is modeled loosely off of - * linux/kernel/dma.c. - * - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include -#include -#include -#include -#include - -#include -#include - -#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \ - defined(CONFIG_SOC_AU1100) -/* - * A note on resource allocation: - * - * All drivers needing DMA channels, should allocate and release them - * through the public routines `request_dma()' and `free_dma()'. - * - * In order to avoid problems, all processes should allocate resources in - * the same sequence and release them in the reverse order. - * - * So, when allocating DMAs and IRQs, first allocate the DMA, then the IRQ. - * When releasing them, first release the IRQ, then release the DMA. The - * main reason for this order is that, if you are requesting the DMA buffer - * done interrupt, you won't know the irq number until the DMA channel is - * returned from request_dma. - */ - -DEFINE_SPINLOCK(au1000_dma_spin_lock); - -struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = { - {.dev_id = -1,}, - {.dev_id = -1,}, - {.dev_id = -1,}, - {.dev_id = -1,}, - {.dev_id = -1,}, - {.dev_id = -1,}, - {.dev_id = -1,}, - {.dev_id = -1,} -}; -EXPORT_SYMBOL(au1000_dma_table); - -/* Device FIFO addresses and default DMA modes */ -static const struct dma_dev { - unsigned int fifo_addr; - unsigned int dma_mode; -} dma_dev_table[DMA_NUM_DEV] = { - {UART0_ADDR + UART_TX, 0}, - {UART0_ADDR + UART_RX, 0}, - {0, 0}, - {0, 0}, - {AC97C_DATA, DMA_DW16 }, /* coherent */ - {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */ - {UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC}, - {UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP0WR, DMA_DW8 | DMA_NC}, - {USBD_EP2WR, DMA_DW8 | DMA_NC}, - {USBD_EP3WR, DMA_DW8 | DMA_NC}, - {USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC}, - {I2S_DATA, DMA_DW32 | DMA_NC}, - {I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC} -}; - -int au1000_dma_read_proc(char *buf, char **start, off_t fpos, - int length, int *eof, void *data) -{ - int i, len = 0; - struct dma_chan *chan; - - for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) { - chan = get_dma_chan(i); - if (chan != NULL) - len += sprintf(buf + len, "%2d: %s\n", - i, chan->dev_str); - } - - if (fpos >= len) { - *start = buf; - *eof = 1; - return 0; - } - *start = buf + fpos; - len -= fpos; - if (len > length) - return length; - *eof = 1; - return len; -} - -/* Device FIFO addresses and default DMA modes - 2nd bank */ -static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = { - { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ - { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */ - { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ - { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */ -}; - -void dump_au1000_dma_channel(unsigned int dmanr) -{ - struct dma_chan *chan; - - if (dmanr >= NUM_AU1000_DMA_CHANNELS) - return; - chan = &au1000_dma_table[dmanr]; - - printk(KERN_INFO "Au1000 DMA%d Register Dump:\n", dmanr); - printk(KERN_INFO " mode = 0x%08x\n", - au_readl(chan->io + DMA_MODE_SET)); - printk(KERN_INFO " addr = 0x%08x\n", - au_readl(chan->io + DMA_PERIPHERAL_ADDR)); - printk(KERN_INFO " start0 = 0x%08x\n", - au_readl(chan->io + DMA_BUFFER0_START)); - printk(KERN_INFO " start1 = 0x%08x\n", - au_readl(chan->io + DMA_BUFFER1_START)); - printk(KERN_INFO " count0 = 0x%08x\n", - au_readl(chan->io + DMA_BUFFER0_COUNT)); - printk(KERN_INFO " count1 = 0x%08x\n", - au_readl(chan->io + DMA_BUFFER1_COUNT)); -} - -/* - * Finds a free channel, and binds the requested device to it. - * Returns the allocated channel number, or negative on error. - * Requests the DMA done IRQ if irqhandler != NULL. - */ -int request_au1000_dma(int dev_id, const char *dev_str, - irq_handler_t irqhandler, - unsigned long irqflags, - void *irq_dev_id) -{ - struct dma_chan *chan; - const struct dma_dev *dev; - int i, ret; - -#if defined(CONFIG_SOC_AU1100) - if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2)) - return -EINVAL; -#else - if (dev_id < 0 || dev_id >= DMA_NUM_DEV) - return -EINVAL; -#endif - - for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) - if (au1000_dma_table[i].dev_id < 0) - break; - - if (i == NUM_AU1000_DMA_CHANNELS) - return -ENODEV; - - chan = &au1000_dma_table[i]; - - if (dev_id >= DMA_NUM_DEV) { - dev_id -= DMA_NUM_DEV; - dev = &dma_dev_table_bank2[dev_id]; - } else - dev = &dma_dev_table[dev_id]; - - if (irqhandler) { - chan->irq = AU1000_DMA_INT_BASE + i; - chan->irq_dev = irq_dev_id; - ret = request_irq(chan->irq, irqhandler, irqflags, dev_str, - chan->irq_dev); - if (ret) { - chan->irq = 0; - chan->irq_dev = NULL; - return ret; - } - } else { - chan->irq = 0; - chan->irq_dev = NULL; - } - - /* fill it in */ - chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN; - chan->dev_id = dev_id; - chan->dev_str = dev_str; - chan->fifo_addr = dev->fifo_addr; - chan->mode = dev->dma_mode; - - /* initialize the channel before returning */ - init_dma(i); - - return i; -} -EXPORT_SYMBOL(request_au1000_dma); - -void free_au1000_dma(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) { - printk(KERN_ERR "Error trying to free DMA%d\n", dmanr); - return; - } - - disable_dma(dmanr); - if (chan->irq) - free_irq(chan->irq, chan->irq_dev); - - chan->irq = 0; - chan->irq_dev = NULL; - chan->dev_id = -1; -} -EXPORT_SYMBOL(free_au1000_dma); - -#endif /* AU1000 AU1500 AU1100 */ diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c deleted file mode 100644 index e660ddd611c4..000000000000 --- a/arch/mips/au1000/common/gpio.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * Copyright (C) 2007, OpenWrt.org, Florian Fainelli - * Architecture specific GPIO support - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Notes : - * au1000 SoC have only one GPIO line : GPIO1 - * others have a second one : GPIO2 - */ - -#include - -#include -#include - -#define gpio1 sys -#if !defined(CONFIG_SOC_AU1000) - -static struct au1x00_gpio2 *const gpio2 = (struct au1x00_gpio2 *) GPIO2_BASE; -#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 - -static int au1xxx_gpio2_read(unsigned gpio) -{ - gpio -= AU1XXX_GPIO_BASE; - return ((gpio2->pinstate >> gpio) & 0x01); -} - -static void au1xxx_gpio2_write(unsigned gpio, int value) -{ - gpio -= AU1XXX_GPIO_BASE; - - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); -} - -static int au1xxx_gpio2_direction_input(unsigned gpio) -{ - gpio -= AU1XXX_GPIO_BASE; - gpio2->dir &= ~(0x01 << gpio); - return 0; -} - -static int au1xxx_gpio2_direction_output(unsigned gpio, int value) -{ - gpio -= AU1XXX_GPIO_BASE; - gpio2->dir |= 0x01 << gpio; - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); - return 0; -} - -#endif /* !defined(CONFIG_SOC_AU1000) */ - -static int au1xxx_gpio1_read(unsigned gpio) -{ - return (gpio1->pinstaterd >> gpio) & 0x01; -} - -static void au1xxx_gpio1_write(unsigned gpio, int value) -{ - if (value) - gpio1->outputset = (0x01 << gpio); - else - /* Output a zero */ - gpio1->outputclr = (0x01 << gpio); -} - -static int au1xxx_gpio1_direction_input(unsigned gpio) -{ - gpio1->pininputen = (0x01 << gpio); - return 0; -} - -static int au1xxx_gpio1_direction_output(unsigned gpio, int value) -{ - gpio1->trioutclr = (0x01 & gpio); - au1xxx_gpio1_write(gpio, value); - return 0; -} - -int au1xxx_gpio_get_value(unsigned gpio) -{ - if (gpio >= AU1XXX_GPIO_BASE) -#if defined(CONFIG_SOC_AU1000) - return 0; -#else - return au1xxx_gpio2_read(gpio); -#endif - else - return au1xxx_gpio1_read(gpio); -} -EXPORT_SYMBOL(au1xxx_gpio_get_value); - -void au1xxx_gpio_set_value(unsigned gpio, int value) -{ - if (gpio >= AU1XXX_GPIO_BASE) -#if defined(CONFIG_SOC_AU1000) - ; -#else - au1xxx_gpio2_write(gpio, value); -#endif - else - au1xxx_gpio1_write(gpio, value); -} -EXPORT_SYMBOL(au1xxx_gpio_set_value); - -int au1xxx_gpio_direction_input(unsigned gpio) -{ - if (gpio >= AU1XXX_GPIO_BASE) -#if defined(CONFIG_SOC_AU1000) - return -ENODEV; -#else - return au1xxx_gpio2_direction_input(gpio); -#endif - - return au1xxx_gpio1_direction_input(gpio); -} -EXPORT_SYMBOL(au1xxx_gpio_direction_input); - -int au1xxx_gpio_direction_output(unsigned gpio, int value) -{ - if (gpio >= AU1XXX_GPIO_BASE) -#if defined(CONFIG_SOC_AU1000) - return -ENODEV; -#else - return au1xxx_gpio2_direction_output(gpio, value); -#endif - - return au1xxx_gpio1_direction_output(gpio, value); -} -EXPORT_SYMBOL(au1xxx_gpio_direction_output); diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c deleted file mode 100644 index 40c6ceceb5f9..000000000000 --- a/arch/mips/au1000/common/irq.c +++ /dev/null @@ -1,596 +0,0 @@ -/* - * Copyright 2001, 2007-2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include - -#include -#include -#include -#ifdef CONFIG_MIPS_PB1000 -#include -#endif - -#define EXT_INTC0_REQ0 2 /* IP 2 */ -#define EXT_INTC0_REQ1 3 /* IP 3 */ -#define EXT_INTC1_REQ0 4 /* IP 4 */ -#define EXT_INTC1_REQ1 5 /* IP 5 */ -#define MIPS_TIMER_IP 7 /* IP 7 */ - -void (*board_init_irq)(void) __initdata = NULL; - -static DEFINE_SPINLOCK(irq_lock); - -#ifdef CONFIG_PM - -/* - * Save/restore the interrupt controller state. - * Called from the save/restore core registers as part of the - * au_sleep function in power.c.....maybe I should just pm_register() - * them instead? - */ -static unsigned int sleep_intctl_config0[2]; -static unsigned int sleep_intctl_config1[2]; -static unsigned int sleep_intctl_config2[2]; -static unsigned int sleep_intctl_src[2]; -static unsigned int sleep_intctl_assign[2]; -static unsigned int sleep_intctl_wake[2]; -static unsigned int sleep_intctl_mask[2]; - -void save_au1xxx_intctl(void) -{ - sleep_intctl_config0[0] = au_readl(IC0_CFG0RD); - sleep_intctl_config1[0] = au_readl(IC0_CFG1RD); - sleep_intctl_config2[0] = au_readl(IC0_CFG2RD); - sleep_intctl_src[0] = au_readl(IC0_SRCRD); - sleep_intctl_assign[0] = au_readl(IC0_ASSIGNRD); - sleep_intctl_wake[0] = au_readl(IC0_WAKERD); - sleep_intctl_mask[0] = au_readl(IC0_MASKRD); - - sleep_intctl_config0[1] = au_readl(IC1_CFG0RD); - sleep_intctl_config1[1] = au_readl(IC1_CFG1RD); - sleep_intctl_config2[1] = au_readl(IC1_CFG2RD); - sleep_intctl_src[1] = au_readl(IC1_SRCRD); - sleep_intctl_assign[1] = au_readl(IC1_ASSIGNRD); - sleep_intctl_wake[1] = au_readl(IC1_WAKERD); - sleep_intctl_mask[1] = au_readl(IC1_MASKRD); -} - -/* - * For most restore operations, we clear the entire register and - * then set the bits we found during the save. - */ -void restore_au1xxx_intctl(void) -{ - au_writel(0xffffffff, IC0_MASKCLR); au_sync(); - - au_writel(0xffffffff, IC0_CFG0CLR); au_sync(); - au_writel(sleep_intctl_config0[0], IC0_CFG0SET); au_sync(); - au_writel(0xffffffff, IC0_CFG1CLR); au_sync(); - au_writel(sleep_intctl_config1[0], IC0_CFG1SET); au_sync(); - au_writel(0xffffffff, IC0_CFG2CLR); au_sync(); - au_writel(sleep_intctl_config2[0], IC0_CFG2SET); au_sync(); - au_writel(0xffffffff, IC0_SRCCLR); au_sync(); - au_writel(sleep_intctl_src[0], IC0_SRCSET); au_sync(); - au_writel(0xffffffff, IC0_ASSIGNCLR); au_sync(); - au_writel(sleep_intctl_assign[0], IC0_ASSIGNSET); au_sync(); - au_writel(0xffffffff, IC0_WAKECLR); au_sync(); - au_writel(sleep_intctl_wake[0], IC0_WAKESET); au_sync(); - au_writel(0xffffffff, IC0_RISINGCLR); au_sync(); - au_writel(0xffffffff, IC0_FALLINGCLR); au_sync(); - au_writel(0x00000000, IC0_TESTBIT); au_sync(); - - au_writel(0xffffffff, IC1_MASKCLR); au_sync(); - - au_writel(0xffffffff, IC1_CFG0CLR); au_sync(); - au_writel(sleep_intctl_config0[1], IC1_CFG0SET); au_sync(); - au_writel(0xffffffff, IC1_CFG1CLR); au_sync(); - au_writel(sleep_intctl_config1[1], IC1_CFG1SET); au_sync(); - au_writel(0xffffffff, IC1_CFG2CLR); au_sync(); - au_writel(sleep_intctl_config2[1], IC1_CFG2SET); au_sync(); - au_writel(0xffffffff, IC1_SRCCLR); au_sync(); - au_writel(sleep_intctl_src[1], IC1_SRCSET); au_sync(); - au_writel(0xffffffff, IC1_ASSIGNCLR); au_sync(); - au_writel(sleep_intctl_assign[1], IC1_ASSIGNSET); au_sync(); - au_writel(0xffffffff, IC1_WAKECLR); au_sync(); - au_writel(sleep_intctl_wake[1], IC1_WAKESET); au_sync(); - au_writel(0xffffffff, IC1_RISINGCLR); au_sync(); - au_writel(0xffffffff, IC1_FALLINGCLR); au_sync(); - au_writel(0x00000000, IC1_TESTBIT); au_sync(); - - au_writel(sleep_intctl_mask[1], IC1_MASKSET); au_sync(); - - au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync(); -} -#endif /* CONFIG_PM */ - - -inline void local_enable_irq(unsigned int irq_nr) -{ - unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; - - if (bit >= 32) { - au_writel(1 << (bit - 32), IC1_MASKSET); - au_writel(1 << (bit - 32), IC1_WAKESET); - } else { - au_writel(1 << bit, IC0_MASKSET); - au_writel(1 << bit, IC0_WAKESET); - } - au_sync(); -} - - -inline void local_disable_irq(unsigned int irq_nr) -{ - unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; - - if (bit >= 32) { - au_writel(1 << (bit - 32), IC1_MASKCLR); - au_writel(1 << (bit - 32), IC1_WAKECLR); - } else { - au_writel(1 << bit, IC0_MASKCLR); - au_writel(1 << bit, IC0_WAKECLR); - } - au_sync(); -} - - -static inline void mask_and_ack_rise_edge_irq(unsigned int irq_nr) -{ - unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; - - if (bit >= 32) { - au_writel(1 << (bit - 32), IC1_RISINGCLR); - au_writel(1 << (bit - 32), IC1_MASKCLR); - } else { - au_writel(1 << bit, IC0_RISINGCLR); - au_writel(1 << bit, IC0_MASKCLR); - } - au_sync(); -} - - -static inline void mask_and_ack_fall_edge_irq(unsigned int irq_nr) -{ - unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; - - if (bit >= 32) { - au_writel(1 << (bit - 32), IC1_FALLINGCLR); - au_writel(1 << (bit - 32), IC1_MASKCLR); - } else { - au_writel(1 << bit, IC0_FALLINGCLR); - au_writel(1 << bit, IC0_MASKCLR); - } - au_sync(); -} - - -static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr) -{ - unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; - - /* - * This may assume that we don't get interrupts from - * both edges at once, or if we do, that we don't care. - */ - if (bit >= 32) { - au_writel(1 << (bit - 32), IC1_FALLINGCLR); - au_writel(1 << (bit - 32), IC1_RISINGCLR); - au_writel(1 << (bit - 32), IC1_MASKCLR); - } else { - au_writel(1 << bit, IC0_FALLINGCLR); - au_writel(1 << bit, IC0_RISINGCLR); - au_writel(1 << bit, IC0_MASKCLR); - } - au_sync(); -} - -static inline void mask_and_ack_level_irq(unsigned int irq_nr) -{ - local_disable_irq(irq_nr); - au_sync(); -#if defined(CONFIG_MIPS_PB1000) - if (irq_nr == AU1000_GPIO_15) { - au_writel(0x8000, PB1000_MDR); /* ack int */ - au_sync(); - } -#endif -} - -static void end_irq(unsigned int irq_nr) -{ - if (!(irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - local_enable_irq(irq_nr); - -#if defined(CONFIG_MIPS_PB1000) - if (irq_nr == AU1000_GPIO_15) { - au_writel(0x4000, PB1000_MDR); /* enable int */ - au_sync(); - } -#endif -} - -unsigned long save_local_and_disable(int controller) -{ - int i; - unsigned long flags, mask; - - spin_lock_irqsave(&irq_lock, flags); - if (controller) { - mask = au_readl(IC1_MASKSET); - for (i = 32; i < 64; i++) - local_disable_irq(i); - } else { - mask = au_readl(IC0_MASKSET); - for (i = 0; i < 32; i++) - local_disable_irq(i); - } - spin_unlock_irqrestore(&irq_lock, flags); - - return mask; -} - -void restore_local_and_enable(int controller, unsigned long mask) -{ - int i; - unsigned long flags, new_mask; - - spin_lock_irqsave(&irq_lock, flags); - for (i = 0; i < 32; i++) - if (mask & (1 << i)) { - if (controller) - local_enable_irq(i + 32); - else - local_enable_irq(i); - } - - if (controller) - new_mask = au_readl(IC1_MASKSET); - else - new_mask = au_readl(IC0_MASKSET); - - spin_unlock_irqrestore(&irq_lock, flags); -} - - -static struct irq_chip rise_edge_irq_type = { - .name = "Au1000 Rise Edge", - .ack = mask_and_ack_rise_edge_irq, - .mask = local_disable_irq, - .mask_ack = mask_and_ack_rise_edge_irq, - .unmask = local_enable_irq, - .end = end_irq, -}; - -static struct irq_chip fall_edge_irq_type = { - .name = "Au1000 Fall Edge", - .ack = mask_and_ack_fall_edge_irq, - .mask = local_disable_irq, - .mask_ack = mask_and_ack_fall_edge_irq, - .unmask = local_enable_irq, - .end = end_irq, -}; - -static struct irq_chip either_edge_irq_type = { - .name = "Au1000 Rise or Fall Edge", - .ack = mask_and_ack_either_edge_irq, - .mask = local_disable_irq, - .mask_ack = mask_and_ack_either_edge_irq, - .unmask = local_enable_irq, - .end = end_irq, -}; - -static struct irq_chip level_irq_type = { - .name = "Au1000 Level", - .ack = mask_and_ack_level_irq, - .mask = local_disable_irq, - .mask_ack = mask_and_ack_level_irq, - .unmask = local_enable_irq, - .end = end_irq, -}; - -static void __init setup_local_irq(unsigned int irq_nr, int type, int int_req) -{ - unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; - - if (irq_nr > AU1000_MAX_INTR) - return; - - /* Config2[n], Config1[n], Config0[n] */ - if (bit >= 32) { - switch (type) { - case INTC_INT_RISE_EDGE: /* 0:0:1 */ - au_writel(1 << (bit - 32), IC1_CFG2CLR); - au_writel(1 << (bit - 32), IC1_CFG1CLR); - au_writel(1 << (bit - 32), IC1_CFG0SET); - set_irq_chip(irq_nr, &rise_edge_irq_type); - break; - case INTC_INT_FALL_EDGE: /* 0:1:0 */ - au_writel(1 << (bit - 32), IC1_CFG2CLR); - au_writel(1 << (bit - 32), IC1_CFG1SET); - au_writel(1 << (bit - 32), IC1_CFG0CLR); - set_irq_chip(irq_nr, &fall_edge_irq_type); - break; - case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */ - au_writel(1 << (bit - 32), IC1_CFG2CLR); - au_writel(1 << (bit - 32), IC1_CFG1SET); - au_writel(1 << (bit - 32), IC1_CFG0SET); - set_irq_chip(irq_nr, &either_edge_irq_type); - break; - case INTC_INT_HIGH_LEVEL: /* 1:0:1 */ - au_writel(1 << (bit - 32), IC1_CFG2SET); - au_writel(1 << (bit - 32), IC1_CFG1CLR); - au_writel(1 << (bit - 32), IC1_CFG0SET); - set_irq_chip(irq_nr, &level_irq_type); - break; - case INTC_INT_LOW_LEVEL: /* 1:1:0 */ - au_writel(1 << (bit - 32), IC1_CFG2SET); - au_writel(1 << (bit - 32), IC1_CFG1SET); - au_writel(1 << (bit - 32), IC1_CFG0CLR); - set_irq_chip(irq_nr, &level_irq_type); - break; - case INTC_INT_DISABLED: /* 0:0:0 */ - au_writel(1 << (bit - 32), IC1_CFG0CLR); - au_writel(1 << (bit - 32), IC1_CFG1CLR); - au_writel(1 << (bit - 32), IC1_CFG2CLR); - break; - default: /* disable the interrupt */ - printk(KERN_WARNING "unexpected int type %d (irq %d)\n", - type, irq_nr); - au_writel(1 << (bit - 32), IC1_CFG0CLR); - au_writel(1 << (bit - 32), IC1_CFG1CLR); - au_writel(1 << (bit - 32), IC1_CFG2CLR); - return; - } - if (int_req) /* assign to interrupt request 1 */ - au_writel(1 << (bit - 32), IC1_ASSIGNCLR); - else /* assign to interrupt request 0 */ - au_writel(1 << (bit - 32), IC1_ASSIGNSET); - au_writel(1 << (bit - 32), IC1_SRCSET); - au_writel(1 << (bit - 32), IC1_MASKCLR); - au_writel(1 << (bit - 32), IC1_WAKECLR); - } else { - switch (type) { - case INTC_INT_RISE_EDGE: /* 0:0:1 */ - au_writel(1 << bit, IC0_CFG2CLR); - au_writel(1 << bit, IC0_CFG1CLR); - au_writel(1 << bit, IC0_CFG0SET); - set_irq_chip(irq_nr, &rise_edge_irq_type); - break; - case INTC_INT_FALL_EDGE: /* 0:1:0 */ - au_writel(1 << bit, IC0_CFG2CLR); - au_writel(1 << bit, IC0_CFG1SET); - au_writel(1 << bit, IC0_CFG0CLR); - set_irq_chip(irq_nr, &fall_edge_irq_type); - break; - case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */ - au_writel(1 << bit, IC0_CFG2CLR); - au_writel(1 << bit, IC0_CFG1SET); - au_writel(1 << bit, IC0_CFG0SET); - set_irq_chip(irq_nr, &either_edge_irq_type); - break; - case INTC_INT_HIGH_LEVEL: /* 1:0:1 */ - au_writel(1 << bit, IC0_CFG2SET); - au_writel(1 << bit, IC0_CFG1CLR); - au_writel(1 << bit, IC0_CFG0SET); - set_irq_chip(irq_nr, &level_irq_type); - break; - case INTC_INT_LOW_LEVEL: /* 1:1:0 */ - au_writel(1 << bit, IC0_CFG2SET); - au_writel(1 << bit, IC0_CFG1SET); - au_writel(1 << bit, IC0_CFG0CLR); - set_irq_chip(irq_nr, &level_irq_type); - break; - case INTC_INT_DISABLED: /* 0:0:0 */ - au_writel(1 << bit, IC0_CFG0CLR); - au_writel(1 << bit, IC0_CFG1CLR); - au_writel(1 << bit, IC0_CFG2CLR); - break; - default: /* disable the interrupt */ - printk(KERN_WARNING "unexpected int type %d (irq %d)\n", - type, irq_nr); - au_writel(1 << bit, IC0_CFG0CLR); - au_writel(1 << bit, IC0_CFG1CLR); - au_writel(1 << bit, IC0_CFG2CLR); - return; - } - if (int_req) /* assign to interrupt request 1 */ - au_writel(1 << bit, IC0_ASSIGNCLR); - else /* assign to interrupt request 0 */ - au_writel(1 << bit, IC0_ASSIGNSET); - au_writel(1 << bit, IC0_SRCSET); - au_writel(1 << bit, IC0_MASKCLR); - au_writel(1 << bit, IC0_WAKECLR); - } - au_sync(); -} - -/* - * Interrupts are nested. Even if an interrupt handler is registered - * as "fast", we might get another interrupt before we return from - * intcX_reqX_irqdispatch(). - */ - -static void intc0_req0_irqdispatch(void) -{ - static unsigned long intc0_req0; - unsigned int bit; - - intc0_req0 |= au_readl(IC0_REQ0INT); - - if (!intc0_req0) - return; - -#ifdef AU1000_USB_DEV_REQ_INT - /* - * Because of the tight timing of SETUP token to reply - * transactions, the USB devices-side packet complete - * interrupt needs the highest priority. - */ - if ((intc0_req0 & (1 << AU1000_USB_DEV_REQ_INT))) { - intc0_req0 &= ~(1 << AU1000_USB_DEV_REQ_INT); - do_IRQ(AU1000_USB_DEV_REQ_INT); - return; - } -#endif - bit = __ffs(intc0_req0); - intc0_req0 &= ~(1 << bit); - do_IRQ(AU1000_INTC0_INT_BASE + bit); -} - - -static void intc0_req1_irqdispatch(void) -{ - static unsigned long intc0_req1; - unsigned int bit; - - intc0_req1 |= au_readl(IC0_REQ1INT); - - if (!intc0_req1) - return; - - bit = __ffs(intc0_req1); - intc0_req1 &= ~(1 << bit); - do_IRQ(AU1000_INTC0_INT_BASE + bit); -} - - -/* - * Interrupt Controller 1: - * interrupts 32 - 63 - */ -static void intc1_req0_irqdispatch(void) -{ - static unsigned long intc1_req0; - unsigned int bit; - - intc1_req0 |= au_readl(IC1_REQ0INT); - - if (!intc1_req0) - return; - - bit = __ffs(intc1_req0); - intc1_req0 &= ~(1 << bit); - do_IRQ(AU1000_INTC1_INT_BASE + bit); -} - - -static void intc1_req1_irqdispatch(void) -{ - static unsigned long intc1_req1; - unsigned int bit; - - intc1_req1 |= au_readl(IC1_REQ1INT); - - if (!intc1_req1) - return; - - bit = __ffs(intc1_req1); - intc1_req1 &= ~(1 << bit); - do_IRQ(AU1000_INTC1_INT_BASE + bit); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause(); - - if (pending & CAUSEF_IP7) - do_IRQ(MIPS_CPU_IRQ_BASE + 7); - else if (pending & CAUSEF_IP2) - intc0_req0_irqdispatch(); - else if (pending & CAUSEF_IP3) - intc0_req1_irqdispatch(); - else if (pending & CAUSEF_IP4) - intc1_req0_irqdispatch(); - else if (pending & CAUSEF_IP5) - intc1_req1_irqdispatch(); - else - spurious_interrupt(); -} - -void __init arch_init_irq(void) -{ - int i; - struct au1xxx_irqmap *imp; - extern struct au1xxx_irqmap au1xxx_irq_map[]; - extern struct au1xxx_irqmap au1xxx_ic0_map[]; - extern int au1xxx_nr_irqs; - extern int au1xxx_ic0_nr_irqs; - - /* - * Initialize interrupt controllers to a safe state. - */ - au_writel(0xffffffff, IC0_CFG0CLR); - au_writel(0xffffffff, IC0_CFG1CLR); - au_writel(0xffffffff, IC0_CFG2CLR); - au_writel(0xffffffff, IC0_MASKCLR); - au_writel(0xffffffff, IC0_ASSIGNSET); - au_writel(0xffffffff, IC0_WAKECLR); - au_writel(0xffffffff, IC0_SRCSET); - au_writel(0xffffffff, IC0_FALLINGCLR); - au_writel(0xffffffff, IC0_RISINGCLR); - au_writel(0x00000000, IC0_TESTBIT); - - au_writel(0xffffffff, IC1_CFG0CLR); - au_writel(0xffffffff, IC1_CFG1CLR); - au_writel(0xffffffff, IC1_CFG2CLR); - au_writel(0xffffffff, IC1_MASKCLR); - au_writel(0xffffffff, IC1_ASSIGNSET); - au_writel(0xffffffff, IC1_WAKECLR); - au_writel(0xffffffff, IC1_SRCSET); - au_writel(0xffffffff, IC1_FALLINGCLR); - au_writel(0xffffffff, IC1_RISINGCLR); - au_writel(0x00000000, IC1_TESTBIT); - - mips_cpu_irq_init(); - - /* - * Initialize IC0, which is fixed per processor. - */ - imp = au1xxx_ic0_map; - for (i = 0; i < au1xxx_ic0_nr_irqs; i++) { - setup_local_irq(imp->im_irq, imp->im_type, imp->im_request); - imp++; - } - - /* - * Now set up the irq mapping for the board. - */ - imp = au1xxx_irq_map; - for (i = 0; i < au1xxx_nr_irqs; i++) { - setup_local_irq(imp->im_irq, imp->im_type, imp->im_request); - imp++; - } - - set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4); - - /* Board specific IRQ initialization. - */ - if (board_init_irq) - board_init_irq(); -} diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c deleted file mode 100644 index 7866cf50cf99..000000000000 --- a/arch/mips/au1000/common/pci.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Alchemy/AMD Au1x00 PCI support. - * - * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * Support for all devices (greater than 16) added by David Gathright. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include - -#include - -/* TBD */ -static struct resource pci_io_resource = { - .start = PCI_IO_START, - .end = PCI_IO_END, - .name = "PCI IO space", - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .start = PCI_MEM_START, - .end = PCI_MEM_END, - .name = "PCI memory space", - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops au1x_pci_ops; - -static struct pci_controller au1x_controller = { - .pci_ops = &au1x_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; - -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) -static unsigned long virt_io_addr; -#endif - -static int __init au1x_pci_setup(void) -{ - extern void au1x_pci_cfg_init(void); - -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) - virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START, - Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1); - - if (!virt_io_addr) { - printk(KERN_ERR "Unable to ioremap pci space\n"); - return 1; - } - au1x_controller.io_map_base = virt_io_addr; - -#ifdef CONFIG_DMA_NONCOHERENT - { - /* - * Set the NC bit in controller for Au1500 pre-AC silicon - */ - u32 prid = read_c0_prid(); - - if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) { - au_writel((1 << 16) | au_readl(Au1500_PCI_CFG), - Au1500_PCI_CFG); - printk(KERN_INFO "Non-coherent PCI accesses enabled\n"); - } - } -#endif - - set_io_port_base(virt_io_addr); -#endif - - au1x_pci_cfg_init(); - - register_pci_controller(&au1x_controller); - return 0; -} - -arch_initcall(au1x_pci_setup); diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c deleted file mode 100644 index dc8a67efac28..000000000000 --- a/arch/mips/au1000/common/platform.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * Platform device support for Au1x00 SoCs. - * - * Copyright 2004, Matt Porter - * - * (C) Copyright Embedded Alley Solutions, Inc 2005 - * Author: Pantelis Antoniou - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include - -#include - -#define PORT(_base, _irq) \ - { \ - .iobase = _base, \ - .membase = (void __iomem *)_base,\ - .mapbase = CPHYSADDR(_base), \ - .irq = _irq, \ - .regshift = 2, \ - .iotype = UPIO_AU, \ - .flags = UPF_SKIP_TEST \ - } - -static struct plat_serial8250_port au1x00_uart_data[] = { -#if defined(CONFIG_SERIAL_8250_AU1X00) -#if defined(CONFIG_SOC_AU1000) - PORT(UART0_ADDR, AU1000_UART0_INT), - PORT(UART1_ADDR, AU1000_UART1_INT), - PORT(UART2_ADDR, AU1000_UART2_INT), - PORT(UART3_ADDR, AU1000_UART3_INT), -#elif defined(CONFIG_SOC_AU1500) - PORT(UART0_ADDR, AU1500_UART0_INT), - PORT(UART3_ADDR, AU1500_UART3_INT), -#elif defined(CONFIG_SOC_AU1100) - PORT(UART0_ADDR, AU1100_UART0_INT), - PORT(UART1_ADDR, AU1100_UART1_INT), - PORT(UART3_ADDR, AU1100_UART3_INT), -#elif defined(CONFIG_SOC_AU1550) - PORT(UART0_ADDR, AU1550_UART0_INT), - PORT(UART1_ADDR, AU1550_UART1_INT), - PORT(UART3_ADDR, AU1550_UART3_INT), -#elif defined(CONFIG_SOC_AU1200) - PORT(UART0_ADDR, AU1200_UART0_INT), - PORT(UART1_ADDR, AU1200_UART1_INT), -#endif -#endif /* CONFIG_SERIAL_8250_AU1X00 */ - { }, -}; - -static struct platform_device au1xx0_uart_device = { - .name = "serial8250", - .id = PLAT8250_DEV_AU1X00, - .dev = { - .platform_data = au1x00_uart_data, - }, -}; - -/* OHCI (USB full speed host controller) */ -static struct resource au1xxx_usb_ohci_resources[] = { - [0] = { - .start = USB_OHCI_BASE, - .end = USB_OHCI_BASE + USB_OHCI_LEN - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1000_USB_HOST_INT, - .end = AU1000_USB_HOST_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = DMA_32BIT_MASK; - -static struct platform_device au1xxx_usb_ohci_device = { - .name = "au1xxx-ohci", - .id = 0, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - }, - .num_resources = ARRAY_SIZE(au1xxx_usb_ohci_resources), - .resource = au1xxx_usb_ohci_resources, -}; - -/*** AU1100 LCD controller ***/ - -#ifdef CONFIG_FB_AU1100 -static struct resource au1100_lcd_resources[] = { - [0] = { - .start = LCD_PHYS_ADDR, - .end = LCD_PHYS_ADDR + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1100_LCD_INT, - .end = AU1100_LCD_INT, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 au1100_lcd_dmamask = DMA_32BIT_MASK; - -static struct platform_device au1100_lcd_device = { - .name = "au1100-lcd", - .id = 0, - .dev = { - .dma_mask = &au1100_lcd_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - }, - .num_resources = ARRAY_SIZE(au1100_lcd_resources), - .resource = au1100_lcd_resources, -}; -#endif - -#ifdef CONFIG_SOC_AU1200 -/* EHCI (USB high speed host controller) */ -static struct resource au1xxx_usb_ehci_resources[] = { - [0] = { - .start = USB_EHCI_BASE, - .end = USB_EHCI_BASE + USB_EHCI_LEN - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1000_USB_HOST_INT, - .end = AU1000_USB_HOST_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ehci_dmamask = DMA_32BIT_MASK; - -static struct platform_device au1xxx_usb_ehci_device = { - .name = "au1xxx-ehci", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - }, - .num_resources = ARRAY_SIZE(au1xxx_usb_ehci_resources), - .resource = au1xxx_usb_ehci_resources, -}; - -/* Au1200 UDC (USB gadget controller) */ -static struct resource au1xxx_usb_gdt_resources[] = { - [0] = { - .start = USB_UDC_BASE, - .end = USB_UDC_BASE + USB_UDC_LEN - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_USB_INT, - .end = AU1200_USB_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource au1xxx_mmc_resources[] = { - [0] = { - .start = SD0_PHYS_ADDR, - .end = SD0_PHYS_ADDR + 0x7ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = SD1_PHYS_ADDR, - .end = SD1_PHYS_ADDR + 0x7ffff, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 udc_dmamask = DMA_32BIT_MASK; - -static struct platform_device au1xxx_usb_gdt_device = { - .name = "au1xxx-udc", - .id = 0, - .dev = { - .dma_mask = &udc_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - }, - .num_resources = ARRAY_SIZE(au1xxx_usb_gdt_resources), - .resource = au1xxx_usb_gdt_resources, -}; - -/* Au1200 UOC (USB OTG controller) */ -static struct resource au1xxx_usb_otg_resources[] = { - [0] = { - .start = USB_UOC_BASE, - .end = USB_UOC_BASE + USB_UOC_LEN - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_USB_INT, - .end = AU1200_USB_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 uoc_dmamask = DMA_32BIT_MASK; - -static struct platform_device au1xxx_usb_otg_device = { - .name = "au1xxx-uoc", - .id = 0, - .dev = { - .dma_mask = &uoc_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - }, - .num_resources = ARRAY_SIZE(au1xxx_usb_otg_resources), - .resource = au1xxx_usb_otg_resources, -}; - -static struct resource au1200_lcd_resources[] = { - [0] = { - .start = LCD_PHYS_ADDR, - .end = LCD_PHYS_ADDR + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_LCD_INT, - .end = AU1200_LCD_INT, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 au1200_lcd_dmamask = DMA_32BIT_MASK; - -static struct platform_device au1200_lcd_device = { - .name = "au1200-lcd", - .id = 0, - .dev = { - .dma_mask = &au1200_lcd_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - }, - .num_resources = ARRAY_SIZE(au1200_lcd_resources), - .resource = au1200_lcd_resources, -}; - -static u64 au1xxx_mmc_dmamask = DMA_32BIT_MASK; - -static struct platform_device au1xxx_mmc_device = { - .name = "au1xxx-mmc", - .id = 0, - .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - }, - .num_resources = ARRAY_SIZE(au1xxx_mmc_resources), - .resource = au1xxx_mmc_resources, -}; -#endif /* #ifdef CONFIG_SOC_AU1200 */ - -static struct platform_device au1x00_pcmcia_device = { - .name = "au1x00-pcmcia", - .id = 0, -}; - -/* All Alchemy demoboards with I2C have this #define in their headers */ -#ifdef SMBUS_PSC_BASE -static struct resource pbdb_smbus_resources[] = { - { - .start = CPHYSADDR(SMBUS_PSC_BASE), - .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff), - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device pbdb_smbus_device = { - .name = "au1xpsc_smbus", - .id = 0, /* bus number */ - .num_resources = ARRAY_SIZE(pbdb_smbus_resources), - .resource = pbdb_smbus_resources, -}; -#endif - -static struct platform_device *au1xxx_platform_devices[] __initdata = { - &au1xx0_uart_device, - &au1xxx_usb_ohci_device, - &au1x00_pcmcia_device, -#ifdef CONFIG_FB_AU1100 - &au1100_lcd_device, -#endif -#ifdef CONFIG_SOC_AU1200 - &au1xxx_usb_ehci_device, - &au1xxx_usb_gdt_device, - &au1xxx_usb_otg_device, - &au1200_lcd_device, - &au1xxx_mmc_device, -#endif -#ifdef SMBUS_PSC_BASE - &pbdb_smbus_device, -#endif -}; - -static int __init au1xxx_platform_init(void) -{ - unsigned int uartclk = get_au1x00_uart_baud_base() * 16; - int i; - - /* Fill up uartclk. */ - for (i = 0; au1x00_uart_data[i].flags; i++) - au1x00_uart_data[i].uartclk = uartclk; - - return platform_add_devices(au1xxx_platform_devices, - ARRAY_SIZE(au1xxx_platform_devices)); -} - -arch_initcall(au1xxx_platform_init); diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c deleted file mode 100644 index bd854a6d1d89..000000000000 --- a/arch/mips/au1000/common/power.c +++ /dev/null @@ -1,465 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xx0 Power Management routines. - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * Some of the routines are right out of init/main.c, whose - * copyrights apply here. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include - -#include -#include -#include - -#ifdef CONFIG_PM - -#define DEBUG 1 -#ifdef DEBUG -#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__, ## args) -#else -#define DPRINTK(fmt, args...) -#endif - -static void au1000_calibrate_delay(void); - -extern unsigned long save_local_and_disable(int controller); -extern void restore_local_and_enable(int controller, unsigned long mask); -extern void local_enable_irq(unsigned int irq_nr); - -static DEFINE_SPINLOCK(pm_lock); - -/* - * We need to save/restore a bunch of core registers that are - * either volatile or reset to some state across a processor sleep. - * If reading a register doesn't provide a proper result for a - * later restore, we have to provide a function for loading that - * register and save a copy. - * - * We only have to save/restore registers that aren't otherwise - * done as part of a driver pm_* function. - */ -static unsigned int sleep_aux_pll_cntrl; -static unsigned int sleep_cpu_pll_cntrl; -static unsigned int sleep_pin_function; -static unsigned int sleep_uart0_inten; -static unsigned int sleep_uart0_fifoctl; -static unsigned int sleep_uart0_linectl; -static unsigned int sleep_uart0_clkdiv; -static unsigned int sleep_uart0_enable; -static unsigned int sleep_usbhost_enable; -static unsigned int sleep_usbdev_enable; -static unsigned int sleep_static_memctlr[4][3]; - -/* - * Define this to cause the value you write to /proc/sys/pm/sleep to - * set the TOY timer for the amount of time you want to sleep. - * This is done mainly for testing, but may be useful in other cases. - * The value is number of 32KHz ticks to sleep. - */ -#define SLEEP_TEST_TIMEOUT 1 -#ifdef SLEEP_TEST_TIMEOUT -static int sleep_ticks; -void wakeup_counter0_set(int ticks); -#endif - -static void save_core_regs(void) -{ - extern void save_au1xxx_intctl(void); - extern void pm_eth0_shutdown(void); - - /* - * Do the serial ports.....these really should be a pm_* - * registered function by the driver......but of course the - * standard serial driver doesn't understand our Au1xxx - * unique registers. - */ - sleep_uart0_inten = au_readl(UART0_ADDR + UART_IER); - sleep_uart0_fifoctl = au_readl(UART0_ADDR + UART_FCR); - sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR); - sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK); - sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL); - - /* Shutdown USB host/device. */ - sleep_usbhost_enable = au_readl(USB_HOST_CONFIG); - - /* There appears to be some undocumented reset register.... */ - au_writel(0, 0xb0100004); au_sync(); - au_writel(0, USB_HOST_CONFIG); au_sync(); - - sleep_usbdev_enable = au_readl(USBD_ENABLE); - au_writel(0, USBD_ENABLE); au_sync(); - - /* Save interrupt controller state. */ - save_au1xxx_intctl(); - - /* Clocks and PLLs. */ - sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL); - - /* - * We don't really need to do this one, but unless we - * write it again it won't have a valid value if we - * happen to read it. - */ - sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL); - - sleep_pin_function = au_readl(SYS_PINFUNC); - - /* Save the static memory controller configuration. */ - sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0); - sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0); - sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0); - sleep_static_memctlr[1][0] = au_readl(MEM_STCFG1); - sleep_static_memctlr[1][1] = au_readl(MEM_STTIME1); - sleep_static_memctlr[1][2] = au_readl(MEM_STADDR1); - sleep_static_memctlr[2][0] = au_readl(MEM_STCFG2); - sleep_static_memctlr[2][1] = au_readl(MEM_STTIME2); - sleep_static_memctlr[2][2] = au_readl(MEM_STADDR2); - sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3); - sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3); - sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3); -} - -static void restore_core_regs(void) -{ - extern void restore_au1xxx_intctl(void); - extern void wakeup_counter0_adjust(void); - - au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync(); - au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync(); - au_writel(sleep_pin_function, SYS_PINFUNC); au_sync(); - - /* Restore the static memory controller configuration. */ - au_writel(sleep_static_memctlr[0][0], MEM_STCFG0); - au_writel(sleep_static_memctlr[0][1], MEM_STTIME0); - au_writel(sleep_static_memctlr[0][2], MEM_STADDR0); - au_writel(sleep_static_memctlr[1][0], MEM_STCFG1); - au_writel(sleep_static_memctlr[1][1], MEM_STTIME1); - au_writel(sleep_static_memctlr[1][2], MEM_STADDR1); - au_writel(sleep_static_memctlr[2][0], MEM_STCFG2); - au_writel(sleep_static_memctlr[2][1], MEM_STTIME2); - au_writel(sleep_static_memctlr[2][2], MEM_STADDR2); - au_writel(sleep_static_memctlr[3][0], MEM_STCFG3); - au_writel(sleep_static_memctlr[3][1], MEM_STTIME3); - au_writel(sleep_static_memctlr[3][2], MEM_STADDR3); - - /* - * Enable the UART if it was enabled before sleep. - * I guess I should define module control bits........ - */ - if (sleep_uart0_enable & 0x02) { - au_writel(0, UART0_ADDR + UART_MOD_CNTRL); au_sync(); - au_writel(1, UART0_ADDR + UART_MOD_CNTRL); au_sync(); - au_writel(3, UART0_ADDR + UART_MOD_CNTRL); au_sync(); - au_writel(sleep_uart0_inten, UART0_ADDR + UART_IER); au_sync(); - au_writel(sleep_uart0_fifoctl, UART0_ADDR + UART_FCR); au_sync(); - au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync(); - au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync(); - } - - restore_au1xxx_intctl(); - wakeup_counter0_adjust(); -} - -unsigned long suspend_mode; - -void wakeup_from_suspend(void) -{ - suspend_mode = 0; -} - -int au_sleep(void) -{ - unsigned long wakeup, flags; - extern void save_and_sleep(void); - - spin_lock_irqsave(&pm_lock, flags); - - save_core_regs(); - - flush_cache_all(); - - /** - ** The code below is all system dependent and we should probably - ** have a function call out of here to set this up. You need - ** to configure the GPIO or timer interrupts that will bring - ** you out of sleep. - ** For testing, the TOY counter wakeup is useful. - **/ -#if 0 - au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD); - - /* GPIO 6 can cause a wake up event */ - wakeup = au_readl(SYS_WAKEMSK); - wakeup &= ~(1 << 8); /* turn off match20 wakeup */ - wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */ -#else - /* For testing, allow match20 to wake us up. */ -#ifdef SLEEP_TEST_TIMEOUT - wakeup_counter0_set(sleep_ticks); -#endif - wakeup = 1 << 8; /* turn on match20 wakeup */ - wakeup = 0; -#endif - au_writel(1, SYS_WAKESRC); /* clear cause */ - au_sync(); - au_writel(wakeup, SYS_WAKEMSK); - au_sync(); - - save_and_sleep(); - - /* - * After a wakeup, the cpu vectors back to 0x1fc00000, so - * it's up to the boot code to get us back here. - */ - restore_core_regs(); - spin_unlock_irqrestore(&pm_lock, flags); - return 0; -} - -static int pm_do_sleep(ctl_table *ctl, int write, struct file *file, - void __user *buffer, size_t *len, loff_t *ppos) -{ -#ifdef SLEEP_TEST_TIMEOUT -#define TMPBUFLEN2 16 - char buf[TMPBUFLEN2], *p; -#endif - - if (!write) - *len = 0; - else { -#ifdef SLEEP_TEST_TIMEOUT - if (*len > TMPBUFLEN2 - 1) - return -EFAULT; - if (copy_from_user(buf, buffer, *len)) - return -EFAULT; - buf[*len] = 0; - p = buf; - sleep_ticks = simple_strtoul(p, &p, 0); -#endif - - au_sleep(); - } - return 0; -} - -static int pm_do_freq(ctl_table *ctl, int write, struct file *file, - void __user *buffer, size_t *len, loff_t *ppos) -{ - int retval = 0, i; - unsigned long val, pll; -#define TMPBUFLEN 64 -#define MAX_CPU_FREQ 396 - char buf[TMPBUFLEN], *p; - unsigned long flags, intc0_mask, intc1_mask; - unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh; - unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh; - unsigned long baud_rate; - - spin_lock_irqsave(&pm_lock, flags); - if (!write) - *len = 0; - else { - /* Parse the new frequency */ - if (*len > TMPBUFLEN - 1) { - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - if (copy_from_user(buf, buffer, *len)) { - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - buf[*len] = 0; - p = buf; - val = simple_strtoul(p, &p, 0); - if (val > MAX_CPU_FREQ) { - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - - pll = val / 12; - if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */ - /* Revisit this for higher speed CPUs */ - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - - old_baud_base = get_au1x00_uart_baud_base(); - old_cpu_freq = get_au1x00_speed(); - - new_cpu_freq = pll * 12 * 1000000; - new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL) - & 0x03) + 2) * 16)); - set_au1x00_speed(new_cpu_freq); - set_au1x00_uart_baud_base(new_baud_base); - - old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff; - new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) | - (au_readl(MEM_SDREFCFG) & ~0x1ffffff); - - au_writel(pll, SYS_CPUPLL); - au_sync_delay(1); - au_writel(new_refresh, MEM_SDREFCFG); - au_sync_delay(1); - - for (i = 0; i < 4; i++) - if (au_readl(UART_BASE + UART_MOD_CNTRL + - i * 0x00100000) == 3) { - old_clk = au_readl(UART_BASE + UART_CLK + - i * 0x00100000); - baud_rate = old_baud_base / old_clk; - /* - * We won't get an exact baud rate and the error - * could be significant enough that our new - * calculation will result in a clock that will - * give us a baud rate that's too far off from - * what we really want. - */ - if (baud_rate > 100000) - baud_rate = 115200; - else if (baud_rate > 50000) - baud_rate = 57600; - else if (baud_rate > 30000) - baud_rate = 38400; - else if (baud_rate > 17000) - baud_rate = 19200; - else - baud_rate = 9600; - new_clk = new_baud_base / baud_rate; - au_writel(new_clk, UART_BASE + UART_CLK + - i * 0x00100000); - au_sync_delay(10); - } - } - - /* - * We don't want _any_ interrupts other than match20. Otherwise our - * au1000_calibrate_delay() calculation will be off, potentially a lot. - */ - intc0_mask = save_local_and_disable(0); - intc1_mask = save_local_and_disable(1); - local_enable_irq(AU1000_TOY_MATCH2_INT); - spin_unlock_irqrestore(&pm_lock, flags); - au1000_calibrate_delay(); - restore_local_and_enable(0, intc0_mask); - restore_local_and_enable(1, intc1_mask); - - return retval; -} - - -static struct ctl_table pm_table[] = { - { - .ctl_name = CTL_UNNUMBERED, - .procname = "sleep", - .data = NULL, - .maxlen = 0, - .mode = 0600, - .proc_handler = &pm_do_sleep - }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "freq", - .data = NULL, - .maxlen = 0, - .mode = 0600, - .proc_handler = &pm_do_freq - }, - {} -}; - -static struct ctl_table pm_dir_table[] = { - { - .ctl_name = CTL_UNNUMBERED, - .procname = "pm", - .mode = 0555, - .child = pm_table - }, - {} -}; - -/* - * Initialize power interface - */ -static int __init pm_init(void) -{ - register_sysctl_table(pm_dir_table); - return 0; -} - -__initcall(pm_init); - -/* - * This is right out of init/main.c - */ - -/* - * This is the number of bits of precision for the loops_per_jiffy. - * Each bit takes on average 1.5/HZ seconds. This (like the original) - * is a little better than 1%. - */ -#define LPS_PREC 8 - -static void au1000_calibrate_delay(void) -{ - unsigned long ticks, loopbit; - int lps_precision = LPS_PREC; - - loops_per_jiffy = 1 << 12; - - while (loops_per_jiffy <<= 1) { - /* Wait for "start of" clock tick */ - ticks = jiffies; - while (ticks == jiffies) - /* nothing */ ; - /* Go ... */ - ticks = jiffies; - __delay(loops_per_jiffy); - ticks = jiffies - ticks; - if (ticks) - break; - } - - /* - * Do a binary approximation to get loops_per_jiffy set to be equal - * one clock (up to lps_precision bits) - */ - loops_per_jiffy >>= 1; - loopbit = loops_per_jiffy; - while (lps_precision-- && (loopbit >>= 1)) { - loops_per_jiffy |= loopbit; - ticks = jiffies; - while (ticks == jiffies); - ticks = jiffies; - __delay(loops_per_jiffy); - if (jiffies != ticks) /* longer than 1 tick */ - loops_per_jiffy &= ~loopbit; - } -} -#endif /* CONFIG_PM */ diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c deleted file mode 100644 index 18b310b475ca..000000000000 --- a/arch/mips/au1000/common/prom.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * PROM library initialisation code, supports YAMON and U-Boot. - * - * Copyright 2000-2001, 2006, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/xx files. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include - -#include - -int prom_argc; -char **prom_argv; -char **prom_envp; - -char * __init_or_module prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - -void prom_init_cmdline(void) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while (actr < prom_argc) { - strcpy(cp, prom_argv[actr]); - cp += strlen(prom_argv[actr]); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - if (prom_argc > 1) - *cp = '\0'; -} - -char *prom_getenv(char *envname) -{ - /* - * Return a pointer to the given environment variable. - * YAMON uses "name", "value" pairs, while U-Boot uses "name=value". - */ - - char **env = prom_envp; - int i = strlen(envname); - int yamon = (*env && strchr(*env, '=') == NULL); - - while (*env) { - if (yamon) { - if (strcmp(envname, *env++) == 0) - return *env; - } else if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=') - return *env + i + 1; - env++; - } - - return NULL; -} - -static inline unsigned char str2hexnum(unsigned char c) -{ - if (c >= '0' && c <= '9') - return c - '0'; - if (c >= 'a' && c <= 'f') - return c - 'a' + 10; - if (c >= 'A' && c <= 'F') - return c - 'A' + 10; - - return 0; /* foo */ -} - -static inline void str2eaddr(unsigned char *ea, unsigned char *str) -{ - int i; - - for (i = 0; i < 6; i++) { - unsigned char num; - - if ((*str == '.') || (*str == ':')) - str++; - num = str2hexnum(*str++) << 4; - num |= str2hexnum(*str++); - ea[i] = num; - } -} - -int prom_get_ethernet_addr(char *ethernet_addr) -{ - char *ethaddr_str; - char *argptr; - - /* Check the environment variables first */ - ethaddr_str = prom_getenv("ethaddr"); - if (!ethaddr_str) { - /* Check command line */ - argptr = prom_getcmdline(); - ethaddr_str = strstr(argptr, "ethaddr="); - if (!ethaddr_str) - return -1; - - ethaddr_str += strlen("ethaddr="); - } - - str2eaddr(ethernet_addr, ethaddr_str); - - return 0; -} -EXPORT_SYMBOL(prom_get_ethernet_addr); - -void __init prom_free_prom_memory(void) -{ -} diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/au1000/common/puts.c deleted file mode 100644 index 55bbe24d45b6..000000000000 --- a/arch/mips/au1000/common/puts.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Low level UART routines to directly access Alchemy UART. - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#define SERIAL_BASE UART_BASE -#define SER_CMD 0x7 -#define SER_DATA 0x1 -#define TX_BUSY 0x20 - -#define TIMEOUT 0xffffff -#define SLOW_DOWN - -static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE; - -#ifdef SLOW_DOWN -static inline void slow_down(void) -{ - int k; - - for (k = 0; k < 10000; k++); -} -#else -#define slow_down() -#endif - -void -prom_putchar(const unsigned char c) -{ - unsigned char ch; - int i = 0; - - do { - ch = com1[SER_CMD]; - slow_down(); - i++; - if (i > TIMEOUT) - break; - } while (0 == (ch & TX_BUSY)); - - com1[SER_DATA] = c; -} diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c deleted file mode 100644 index d555429c8d6f..000000000000 --- a/arch/mips/au1000/common/reset.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Au1xx0 reset routines. - * - * Copyright 2001, 2006, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#include - -extern int au_sleep(void); - -void au1000_restart(char *command) -{ - /* Set all integrated peripherals to disabled states */ - extern void board_reset(void); - u32 prid = read_c0_prid(); - - printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n"); - - switch (prid & 0xFF000000) { - case 0x00000000: /* Au1000 */ - au_writel(0x02, 0xb0000010); /* ac97_enable */ - au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ - asm("sync"); - au_writel(0x00, 0xb017fffc); /* usbh_enable */ - au_writel(0x00, 0xb0200058); /* usbd_enable */ - au_writel(0x00, 0xb0300040); /* ir_enable */ - au_writel(0x00, 0xb4004104); /* mac dma */ - au_writel(0x00, 0xb4004114); /* mac dma */ - au_writel(0x00, 0xb4004124); /* mac dma */ - au_writel(0x00, 0xb4004134); /* mac dma */ - au_writel(0x00, 0xb0520000); /* macen0 */ - au_writel(0x00, 0xb0520004); /* macen1 */ - au_writel(0x00, 0xb1000008); /* i2s_enable */ - au_writel(0x00, 0xb1100100); /* uart0_enable */ - au_writel(0x00, 0xb1200100); /* uart1_enable */ - au_writel(0x00, 0xb1300100); /* uart2_enable */ - au_writel(0x00, 0xb1400100); /* uart3_enable */ - au_writel(0x02, 0xb1600100); /* ssi0_enable */ - au_writel(0x02, 0xb1680100); /* ssi1_enable */ - au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ - au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ - au_writel(0x00, 0xb1900028); /* sys_clksrc */ - au_writel(0x10, 0xb1900060); /* sys_cpupll */ - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; - case 0x01000000: /* Au1500 */ - au_writel(0x02, 0xb0000010); /* ac97_enable */ - au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ - asm("sync"); - au_writel(0x00, 0xb017fffc); /* usbh_enable */ - au_writel(0x00, 0xb0200058); /* usbd_enable */ - au_writel(0x00, 0xb4004104); /* mac dma */ - au_writel(0x00, 0xb4004114); /* mac dma */ - au_writel(0x00, 0xb4004124); /* mac dma */ - au_writel(0x00, 0xb4004134); /* mac dma */ - au_writel(0x00, 0xb1520000); /* macen0 */ - au_writel(0x00, 0xb1520004); /* macen1 */ - au_writel(0x00, 0xb1100100); /* uart0_enable */ - au_writel(0x00, 0xb1400100); /* uart3_enable */ - au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ - au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ - au_writel(0x00, 0xb1900028); /* sys_clksrc */ - au_writel(0x10, 0xb1900060); /* sys_cpupll */ - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; - case 0x02000000: /* Au1100 */ - au_writel(0x02, 0xb0000010); /* ac97_enable */ - au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ - asm("sync"); - au_writel(0x00, 0xb017fffc); /* usbh_enable */ - au_writel(0x00, 0xb0200058); /* usbd_enable */ - au_writel(0x00, 0xb0300040); /* ir_enable */ - au_writel(0x00, 0xb4004104); /* mac dma */ - au_writel(0x00, 0xb4004114); /* mac dma */ - au_writel(0x00, 0xb4004124); /* mac dma */ - au_writel(0x00, 0xb4004134); /* mac dma */ - au_writel(0x00, 0xb0520000); /* macen0 */ - au_writel(0x00, 0xb1000008); /* i2s_enable */ - au_writel(0x00, 0xb1100100); /* uart0_enable */ - au_writel(0x00, 0xb1200100); /* uart1_enable */ - au_writel(0x00, 0xb1400100); /* uart3_enable */ - au_writel(0x02, 0xb1600100); /* ssi0_enable */ - au_writel(0x02, 0xb1680100); /* ssi1_enable */ - au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ - au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ - au_writel(0x00, 0xb1900028); /* sys_clksrc */ - au_writel(0x10, 0xb1900060); /* sys_cpupll */ - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; - case 0x03000000: /* Au1550 */ - au_writel(0x00, 0xb1a00004); /* psc 0 */ - au_writel(0x00, 0xb1b00004); /* psc 1 */ - au_writel(0x00, 0xb0a00004); /* psc 2 */ - au_writel(0x00, 0xb0b00004); /* psc 3 */ - au_writel(0x00, 0xb017fffc); /* usbh_enable */ - au_writel(0x00, 0xb0200058); /* usbd_enable */ - au_writel(0x00, 0xb4004104); /* mac dma */ - au_writel(0x00, 0xb4004114); /* mac dma */ - au_writel(0x00, 0xb4004124); /* mac dma */ - au_writel(0x00, 0xb4004134); /* mac dma */ - au_writel(0x00, 0xb1520000); /* macen0 */ - au_writel(0x00, 0xb1520004); /* macen1 */ - au_writel(0x00, 0xb1100100); /* uart0_enable */ - au_writel(0x00, 0xb1200100); /* uart1_enable */ - au_writel(0x00, 0xb1400100); /* uart3_enable */ - au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ - au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ - au_writel(0x00, 0xb1900028); /* sys_clksrc */ - au_writel(0x10, 0xb1900060); /* sys_cpupll */ - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; - } - - set_c0_status(ST0_BEV | ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - flush_cache_all(); - write_c0_wired(0); - - /* Give board a chance to do a hardware reset */ - board_reset(); - - /* Jump to the beggining in case board_reset() is empty */ - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -} - -void au1000_halt(void) -{ -#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) - /* Power off system */ - printk(KERN_NOTICE "\n** Powering off...\n"); - au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C); - au_sync(); - while (1); /* should not get here */ -#else - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); -#ifdef CONFIG_MIPS_MIRAGE - au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); -#endif -#ifdef CONFIG_MIPS_DB1200 - au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C); -#endif -#ifdef CONFIG_PM - au_sleep(); - - /* Should not get here */ - printk(KERN_ERR "Unable to put CPU in sleep mode\n"); - while (1); -#else - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -#endif -#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */ -} - -void au1000_power_off(void) -{ - au1000_halt(); -} diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c deleted file mode 100644 index 1ac6b06f42a3..000000000000 --- a/arch/mips/au1000/common/setup.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright 2000, 2007-2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. -#include -#include -#include - -#include -#include -#include - -#include -#include - -extern void __init board_setup(void); -extern void au1000_restart(char *); -extern void au1000_halt(void); -extern void au1000_power_off(void); -extern void set_cpuspec(void); - -void __init plat_mem_setup(void) -{ - struct cpu_spec *sp; - char *argptr; - unsigned long prid, cpufreq, bclk; - - set_cpuspec(); - sp = cur_cpu_spec[0]; - - board_setup(); /* board specific setup */ - - prid = read_c0_prid(); - if (sp->cpu_pll_wo) -#ifdef CONFIG_SOC_AU1000_FREQUENCY - cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000; -#else - cpufreq = 396; -#endif - else - cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12; - printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq); - - if (sp->cpu_bclk) { - /* Enable BCLK switching */ - bclk = au_readl(SYS_POWERCTRL); - au_writel(bclk | 0x60, SYS_POWERCTRL); - printk(KERN_INFO "BCLK switching enabled!\n"); - } - - if (sp->cpu_od) - /* Various early Au1xx0 errata corrected by this */ - set_c0_config(1 << 19); /* Set Config[OD] */ - else - /* Clear to obtain best system bus performance */ - clear_c0_config(1 << 19); /* Clear Config[OD] */ - - argptr = prom_getcmdline(); - -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - -#ifdef CONFIG_FB_AU1100 - argptr = strstr(argptr, "video="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - /* default panel */ - /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ - } -#endif - -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); -#endif - _machine_restart = au1000_restart; - _machine_halt = au1000_halt; - pm_power_off = au1000_power_off; - - /* IO/MEM resources. */ - set_io_port_base(0); - ioport_resource.start = IOPORT_RESOURCE_START; - ioport_resource.end = IOPORT_RESOURCE_END; - iomem_resource.start = IOMEM_RESOURCE_START; - iomem_resource.end = IOMEM_RESOURCE_END; - - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_E0S); - au_writel(SYS_CNTRL_E0 | SYS_CNTRL_EN0, SYS_COUNTER_CNTRL); - au_sync(); - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S); - au_writel(0, SYS_TOYTRIM); -} - -#if defined(CONFIG_64BIT_PHYS_ADDR) -/* This routine should be valid for all Au1x based boards */ -phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) -{ - /* Don't fixup 36-bit addresses */ - if ((phys_addr >> 32) != 0) - return phys_addr; - -#ifdef CONFIG_PCI - { - u32 start = (u32)Au1500_PCI_MEM_START; - u32 end = (u32)Au1500_PCI_MEM_END; - - /* Check for PCI memory window */ - if (phys_addr >= start && (phys_addr + size - 1) <= end) - return (phys_t) - ((phys_addr - start) + Au1500_PCI_MEM_START); - } -#endif - - /* - * All Au1xx0 SOCs have a PCMCIA controller. - * We setup our 32-bit pseudo addresses to be equal to the - * 36-bit addr >> 4, to make it easier to check the address - * and fix it. - * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000. - * The pseudo address we use is 0xF400 0000. Any address over - * 0xF400 0000 is a PCMCIA pseudo address. - */ - if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) - return (phys_t)(phys_addr << 4); - - /* default nop */ - return phys_addr; -} -EXPORT_SYMBOL(__fixup_bigphys_addr); -#endif diff --git a/arch/mips/au1000/common/sleeper.S b/arch/mips/au1000/common/sleeper.S deleted file mode 100644 index 4b3cf021a454..000000000000 --- a/arch/mips/au1000/common/sleeper.S +++ /dev/null @@ -1,154 +0,0 @@ -/* - * Copyright 2002 Embedded Edge, LLC - * Author: dan@embeddededge.com - * - * Sleep helper for Au1xxx sleep mode. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include - - .text - .set macro - .set noat - .align 5 - -/* Save all of the processor general registers and go to sleep. - * A wakeup condition will get us back here to restore the registers. - */ -LEAF(save_and_sleep) - - subu sp, PT_SIZE - sw $1, PT_R1(sp) - sw $2, PT_R2(sp) - sw $3, PT_R3(sp) - sw $4, PT_R4(sp) - sw $5, PT_R5(sp) - sw $6, PT_R6(sp) - sw $7, PT_R7(sp) - sw $8, PT_R8(sp) - sw $9, PT_R9(sp) - sw $10, PT_R10(sp) - sw $11, PT_R11(sp) - sw $12, PT_R12(sp) - sw $13, PT_R13(sp) - sw $14, PT_R14(sp) - sw $15, PT_R15(sp) - sw $16, PT_R16(sp) - sw $17, PT_R17(sp) - sw $18, PT_R18(sp) - sw $19, PT_R19(sp) - sw $20, PT_R20(sp) - sw $21, PT_R21(sp) - sw $22, PT_R22(sp) - sw $23, PT_R23(sp) - sw $24, PT_R24(sp) - sw $25, PT_R25(sp) - sw $26, PT_R26(sp) - sw $27, PT_R27(sp) - sw $28, PT_R28(sp) - sw $29, PT_R29(sp) - sw $30, PT_R30(sp) - sw $31, PT_R31(sp) - mfc0 k0, CP0_STATUS - sw k0, 0x20(sp) - mfc0 k0, CP0_CONTEXT - sw k0, 0x1c(sp) - mfc0 k0, CP0_PAGEMASK - sw k0, 0x18(sp) - mfc0 k0, CP0_CONFIG - sw k0, 0x14(sp) - - /* Now set up the scratch registers so the boot rom will - * return to this point upon wakeup. - */ - la k0, 1f - lui k1, 0xb190 - ori k1, 0x18 - sw sp, 0(k1) - ori k1, 0x1c - sw k0, 0(k1) - -/* Put SDRAM into self refresh. Preload instructions into cache, - * issue a precharge, then auto refresh, then sleep commands to it. - */ - la t0, sdsleep - .set mips3 - cache 0x14, 0(t0) - cache 0x14, 32(t0) - cache 0x14, 64(t0) - cache 0x14, 96(t0) - .set mips0 - -sdsleep: - lui k0, 0xb400 - sw zero, 0x001c(k0) /* Precharge */ - sw zero, 0x0020(k0) /* Auto refresh */ - sw zero, 0x0030(k0) /* SDRAM sleep */ - sync - - lui k1, 0xb190 - sw zero, 0x0078(k1) /* get ready to sleep */ - sync - sw zero, 0x007c(k1) /* Put processor to sleep */ - sync - - /* This is where we return upon wakeup. - * Reload all of the registers and return. - */ -1: nop - lw k0, 0x20(sp) - mtc0 k0, CP0_STATUS - lw k0, 0x1c(sp) - mtc0 k0, CP0_CONTEXT - lw k0, 0x18(sp) - mtc0 k0, CP0_PAGEMASK - lw k0, 0x14(sp) - mtc0 k0, CP0_CONFIG - - /* We need to catch the ealry Alchemy SOCs with - * the write-only Config[OD] bit and set it back to one... - */ - jal au1x00_fixup_config_od - lw $1, PT_R1(sp) - lw $2, PT_R2(sp) - lw $3, PT_R3(sp) - lw $4, PT_R4(sp) - lw $5, PT_R5(sp) - lw $6, PT_R6(sp) - lw $7, PT_R7(sp) - lw $8, PT_R8(sp) - lw $9, PT_R9(sp) - lw $10, PT_R10(sp) - lw $11, PT_R11(sp) - lw $12, PT_R12(sp) - lw $13, PT_R13(sp) - lw $14, PT_R14(sp) - lw $15, PT_R15(sp) - lw $16, PT_R16(sp) - lw $17, PT_R17(sp) - lw $18, PT_R18(sp) - lw $19, PT_R19(sp) - lw $20, PT_R20(sp) - lw $21, PT_R21(sp) - lw $22, PT_R22(sp) - lw $23, PT_R23(sp) - lw $24, PT_R24(sp) - lw $25, PT_R25(sp) - lw $26, PT_R26(sp) - lw $27, PT_R27(sp) - lw $28, PT_R28(sp) - lw $29, PT_R29(sp) - lw $30, PT_R30(sp) - lw $31, PT_R31(sp) - addiu sp, PT_SIZE - - jr ra -END(save_and_sleep) diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c deleted file mode 100644 index 563d9390a872..000000000000 --- a/arch/mips/au1000/common/time.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - * - * Copyright (C) 2001, 2006, 2008 MontaVista Software, - * Copied and modified Carsten Langgaard's time.c - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Setting up the clock on the MIPS boards. - * - * We provide the clock interrupt processing and the timer offset compute - * functions. If CONFIG_PM is selected, we also ensure the 32KHz timer is - * available. -- Dan - */ - -#include -#include -#include - -#include -#include -#include - -static int no_au1xxx_32khz; -extern int allow_au1k_wait; /* default off for CP0 Counter */ - -#ifdef CONFIG_PM -#if HZ < 100 || HZ > 1000 -#error "unsupported HZ value! Must be in [100,1000]" -#endif -#define MATCH20_INC (328 * 100 / HZ) /* magic number 328 is for HZ=100... */ -static unsigned long last_pc0, last_match20; -#endif - -static DEFINE_SPINLOCK(time_lock); - -unsigned long wtimer; - -#ifdef CONFIG_PM -static irqreturn_t counter0_irq(int irq, void *dev_id) -{ - unsigned long pc0; - int time_elapsed; - static int jiffie_drift; - - if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) { - /* should never happen! */ - printk(KERN_WARNING "counter 0 w status error\n"); - return IRQ_NONE; - } - - pc0 = au_readl(SYS_TOYREAD); - if (pc0 < last_match20) - /* counter overflowed */ - time_elapsed = (0xffffffff - last_match20) + pc0; - else - time_elapsed = pc0 - last_match20; - - while (time_elapsed > 0) { - do_timer(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif - time_elapsed -= MATCH20_INC; - last_match20 += MATCH20_INC; - jiffie_drift++; - } - - last_pc0 = pc0; - au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); - au_sync(); - - /* - * Our counter ticks at 10.009765625 ms/tick, we we're running - * almost 10 uS too slow per tick. - */ - - if (jiffie_drift >= 999) { - jiffie_drift -= 999; - do_timer(1); /* increment jiffies by one */ -#ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif - } - - return IRQ_HANDLED; -} - -struct irqaction counter0_action = { - .handler = counter0_irq, - .flags = IRQF_DISABLED, - .name = "alchemy-toy", - .dev_id = NULL, -}; - -/* When we wakeup from sleep, we have to "catch up" on all of the - * timer ticks we have missed. - */ -void wakeup_counter0_adjust(void) -{ - unsigned long pc0; - int time_elapsed; - - pc0 = au_readl(SYS_TOYREAD); - if (pc0 < last_match20) - /* counter overflowed */ - time_elapsed = (0xffffffff - last_match20) + pc0; - else - time_elapsed = pc0 - last_match20; - - while (time_elapsed > 0) { - time_elapsed -= MATCH20_INC; - last_match20 += MATCH20_INC; - } - - last_pc0 = pc0; - au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); - au_sync(); - -} - -/* This is just for debugging to set the timer for a sleep delay. */ -void wakeup_counter0_set(int ticks) -{ - unsigned long pc0; - - pc0 = au_readl(SYS_TOYREAD); - last_pc0 = pc0; - au_writel(last_match20 + (MATCH20_INC * ticks), SYS_TOYMATCH2); - au_sync(); -} -#endif - -/* - * I haven't found anyone that doesn't use a 12 MHz source clock, - * but just in case..... - */ -#define AU1000_SRC_CLK 12000000 - -/* - * We read the real processor speed from the PLL. This is important - * because it is more accurate than computing it from the 32 KHz - * counter, if it exists. If we don't have an accurate processor - * speed, all of the peripherals that derive their clocks based on - * this advertised speed will introduce error and sometimes not work - * properly. This function is futher convoluted to still allow configurations - * to do that in case they have really, really old silicon with a - * write-only PLL register, that we need the 32 KHz when power management - * "wait" is enabled, and we need to detect if the 32 KHz isn't present - * but requested......got it? :-) -- Dan - */ -unsigned long calc_clock(void) -{ - unsigned long cpu_speed; - unsigned long flags; - unsigned long counter; - - spin_lock_irqsave(&time_lock, flags); - - /* Power management cares if we don't have a 32 KHz counter. */ - no_au1xxx_32khz = 0; - counter = au_readl(SYS_COUNTER_CNTRL); - if (counter & SYS_CNTRL_E0) { - int trim_divide = 16; - - au_writel(counter | SYS_CNTRL_EN1, SYS_COUNTER_CNTRL); - - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S); - /* RTC now ticks at 32.768/16 kHz */ - au_writel(trim_divide - 1, SYS_RTCTRIM); - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S); - - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); - au_writel(0, SYS_TOYWRITE); - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); - } else - no_au1xxx_32khz = 1; - - /* - * On early Au1000, sys_cpupll was write-only. Since these - * silicon versions of Au1000 are not sold by AMD, we don't bend - * over backwards trying to determine the frequency. - */ - if (cur_cpu_spec[0]->cpu_pll_wo) -#ifdef CONFIG_SOC_AU1000_FREQUENCY - cpu_speed = CONFIG_SOC_AU1000_FREQUENCY; -#else - cpu_speed = 396000000; -#endif - else - cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK; - /* On Alchemy CPU:counter ratio is 1:1 */ - mips_hpt_frequency = cpu_speed; - /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */ - set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL) - & 0x03) + 2) * 16)); - spin_unlock_irqrestore(&time_lock, flags); - return cpu_speed; -} - -void __init plat_time_init(void) -{ - unsigned int est_freq = calc_clock(); - - est_freq += 5000; /* round */ - est_freq -= est_freq%10000; - printk(KERN_INFO "CPU frequency %u.%02u MHz\n", - est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000); - set_au1x00_speed(est_freq); - set_au1x00_lcd_clock(); /* program the LCD clock */ - -#ifdef CONFIG_PM - /* - * setup counter 0, since it keeps ticking after a - * 'wait' instruction has been executed. The CP0 timer and - * counter 1 do NOT continue running after 'wait' - * - * It's too early to call request_irq() here, so we handle - * counter 0 interrupt as a special irq and it doesn't show - * up under /proc/interrupts. - * - * Check to ensure we really have a 32 KHz oscillator before - * we do this. - */ - if (no_au1xxx_32khz) - printk(KERN_WARNING "WARNING: no 32KHz clock found.\n"); - else { - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); - au_writel(0, SYS_TOYWRITE); - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); - - au_writel(au_readl(SYS_WAKEMSK) | (1 << 8), SYS_WAKEMSK); - au_writel(~0, SYS_WAKESRC); - au_sync(); - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); - - /* Setup match20 to interrupt once every HZ */ - last_pc0 = last_match20 = au_readl(SYS_TOYREAD); - au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); - au_sync(); - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); - setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action); - - /* We can use the real 'wait' instruction. */ - allow_au1k_wait = 1; - } - -#endif -} diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile deleted file mode 100644 index 274db3b55d82..000000000000 --- a/arch/mips/au1000/db1x00/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for the Alchemy Semiconductor DBAu1xx0 boards. -# - -lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c deleted file mode 100644 index 9e5ccbbfcedd..000000000000 --- a/arch/mips/au1000/db1x00/board_setup.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Db1x00 board setup. - * - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#include -#include - -static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; - -void board_reset(void) -{ - /* Hit BCSR.SW_RESET[RESET] */ - bcsr->swreset = 0x0000; -} - -void __init board_setup(void) -{ - u32 pin_func = 0; - - /* Not valid for Au1550 */ -#if defined(CONFIG_IRDA) && \ - (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) - /* Set IRFIRSEL instead of GPIO15 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; - au_writel(pin_func, SYS_PINFUNC); - /* Power off until the driver is in use */ - bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK; - bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF; - au_sync(); -#endif - bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */ - -#ifdef CONFIG_MIPS_MIRAGE - /* Enable GPIO[31:0] inputs */ - au_writel(0, SYS_PININPUTEN); - - /* GPIO[20] is output, tristate the other input primary GPIOs */ - au_writel(~(1 << 20), SYS_TRIOUTCLR); - - /* Set GPIO[210:208] instead of SSI_0 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; - - /* Set GPIO[215:211] for LEDs */ - pin_func |= 5 << 2; - - /* Set GPIO[214:213] for more LEDs */ - pin_func |= 5 << 12; - - /* Set GPIO[207:200] instead of PCMCIA/LCD */ - pin_func |= SYS_PF_LCD | SYS_PF_PC; - au_writel(pin_func, SYS_PINFUNC); - - /* - * Enable speaker amplifier. This should - * be part of the audio driver. - */ - au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR); - au_writel(0x02000200, GPIO2_OUTPUT); -#endif - - au_sync(); - -#ifdef CONFIG_MIPS_DB1000 - printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1500 - printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1100 - printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); -#endif -#ifdef CONFIG_MIPS_BOSPORUS - printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); -#endif -#ifdef CONFIG_MIPS_MIRAGE - printk(KERN_INFO "AMD Alchemy Mirage Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1550 - printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); -#endif -} diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c deleted file mode 100644 index 847413514964..000000000000 --- a/arch/mips/au1000/db1x00/init.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * PB1000 board setup - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include - -#include - -const char *get_system_type(void) -{ -#ifdef CONFIG_MIPS_BOSPORUS - return "Alchemy Bosporus Gateway Reference"; -#else - return "Alchemy Db1x00"; -#endif -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x04000000; - else - strict_strtol(memsize_str, 0, &memsize); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c deleted file mode 100644 index 94c090e8bf7a..000000000000 --- a/arch/mips/au1000/db1x00/irqmap.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#include - -#ifdef CONFIG_MIPS_DB1500 -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ -}; -#endif - -#ifdef CONFIG_MIPS_BOSPORUS -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */ - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ -}; -#endif - -#ifdef CONFIG_MIPS_MIRAGE -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */ - [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */ - [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */ -}; -#endif - -#ifdef CONFIG_MIPS_DB1550 -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */ - [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ -}; -#endif - - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - -#ifndef CONFIG_MIPS_MIRAGE -#ifdef CONFIG_MIPS_DB1550 - { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */ - { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */ -#else - { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */ - { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */ - { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */ - - { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */ - { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */ - { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */ -#endif -#else - { AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */ -#endif - -}; - -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile deleted file mode 100644 index 7c67b3d33bec..000000000000 --- a/arch/mips/au1000/mtx-1/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright 2003 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# Bruno Randolf -# -# Makefile for 4G Systems MTX-1 board. -# - -lib-y := init.o board_setup.o irqmap.o -obj-y := platform.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c deleted file mode 100644 index 3f8079186cf2..000000000000 --- a/arch/mips/au1000/mtx-1/board_setup.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * 4G Systems MTX-1 board setup. - * - * Copyright 2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * Bruno Randolf - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#include - -extern int (*board_pci_idsel)(unsigned int devsel, int assert); -int mtx1_pci_idsel(unsigned int devsel, int assert); - -void board_reset(void) -{ - /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ - au_writel(0x00000000, 0xAE00001C); -} - -void __init board_setup(void) -{ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - /* Enable USB power switch */ - au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR); - au_writel(0x100000, GPIO2_OUTPUT); -#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ - -#ifdef CONFIG_PCI -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif -#endif - - /* Initialize sys_pinfunc */ - au_writel(SYS_PF_NI2, SYS_PINFUNC); - - /* Initialize GPIO */ - au_writel(0xFFFFFFFF, SYS_TRIOUTCLR); - au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */ - au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */ - au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */ - au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */ - - /* Enable LED and set it to green */ - au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR); - au_writel(0x18000800, GPIO2_OUTPUT); - - board_pci_idsel = mtx1_pci_idsel; - - printk(KERN_INFO "4G Systems MTX-1 Board\n"); -} - -int -mtx1_pci_idsel(unsigned int devsel, int assert) -{ -#define MTX_IDSEL_ONLY_0_AND_3 0 -#if MTX_IDSEL_ONLY_0_AND_3 - if (devsel != 0 && devsel != 3) { - printk(KERN_ERR "*** not 0 or 3\n"); - return 0; - } -#endif - - if (assert && devsel != 0) - /* Suppress signal to Cardbus */ - au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */ - else - au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */ - au_sync_udelay(1); - return 1; -} - diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c deleted file mode 100644 index 3bae13c28954..000000000000 --- a/arch/mips/au1000/mtx-1/init.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * 4G Systems MTX-1 board setup - * - * Copyright 2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * Bruno Randolf - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include - -#include - -const char *get_system_type(void) -{ - return "MTX-1"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x04000000; - else - strict_strtol(memsize_str, 0, &memsize); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c deleted file mode 100644 index f2bf02951e9c..000000000000 --- a/arch/mips/au1000/mtx-1/irqmap.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#include - -char irq_tab_alchemy[][5] __initdata = { - [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */ - [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ - [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */ - [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ - [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */ - [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ - [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */ - [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ -}; - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, - { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, -}; - -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c deleted file mode 100644 index 8b5914d1241f..000000000000 --- a/arch/mips/au1000/mtx-1/platform.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * MTX-1 platform devices registration - * - * Copyright (C) 2007, Florian Fainelli - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct gpio_keys_button mtx1_gpio_button[] = { - { - .gpio = 207, - .code = BTN_0, - .desc = "System button", - } -}; - -static struct gpio_keys_platform_data mtx1_buttons_data = { - .buttons = mtx1_gpio_button, - .nbuttons = ARRAY_SIZE(mtx1_gpio_button), -}; - -static struct platform_device mtx1_button = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &mtx1_buttons_data, - } -}; - -static struct resource mtx1_wdt_res[] = { - [0] = { - .start = 15, - .end = 15, - .name = "mtx1-wdt-gpio", - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device mtx1_wdt = { - .name = "mtx1-wdt", - .id = 0, - .num_resources = ARRAY_SIZE(mtx1_wdt_res), - .resource = mtx1_wdt_res, -}; - -static struct gpio_led default_leds[] = { - { - .name = "mtx1:green", - .gpio = 211, - }, { - .name = "mtx1:red", - .gpio = 212, - }, -}; - -static struct gpio_led_platform_data mtx1_led_data = { - .num_leds = ARRAY_SIZE(default_leds), - .leds = default_leds, -}; - -static struct platform_device mtx1_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &mtx1_led_data, - } -}; - -static struct mtd_partition mtx1_mtd_partitions[] = { - { - .name = "filesystem", - .size = 0x01C00000, - .offset = 0, - }, - { - .name = "yamon", - .size = 0x00100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .size = 0x002c0000, - .offset = MTDPART_OFS_APPEND, - }, - { - .name = "yamon env", - .size = 0x00040000, - .offset = MTDPART_OFS_APPEND, - }, -}; - -static struct physmap_flash_data mtx1_flash_data = { - .width = 4, - .nr_parts = 4, - .parts = mtx1_mtd_partitions, -}; - -static struct resource mtx1_mtd_resource = { - .start = 0x1e000000, - .end = 0x1fffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device mtx1_mtd = { - .name = "physmap-flash", - .dev = { - .platform_data = &mtx1_flash_data, - }, - .num_resources = 1, - .resource = &mtx1_mtd_resource, -}; - -static struct __initdata platform_device * mtx1_devs[] = { - &mtx1_gpio_leds, - &mtx1_wdt, - &mtx1_button, - &mtx1_mtd, -}; - -static int __init mtx1_register_devices(void) -{ - gpio_direction_input(207); - return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs)); -} - -arch_initcall(mtx1_register_devices); diff --git a/arch/mips/au1000/pb1000/Makefile b/arch/mips/au1000/pb1000/Makefile deleted file mode 100644 index 99bbec0ca41b..000000000000 --- a/arch/mips/au1000/pb1000/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for the Alchemy Semiconductor Pb1000 board. -# - -lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c deleted file mode 100644 index 25df167a95b3..000000000000 --- a/arch/mips/au1000/pb1000/board_setup.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include -#include - -void board_reset(void) -{ -} - -void __init board_setup(void) -{ - u32 pin_func, static_cfg0; - u32 sys_freqctrl, sys_clksrc; - u32 prid = read_c0_prid(); - - /* Set AUX clock to 12 MHz * 8 = 96 MHz */ - au_writel(8, SYS_AUXPLL); - au_writel(0, SYS_PINSTATERD); - udelay(100); - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - /* Zero and disable FREQ2 */ - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* Zero and disable USBH/USBD clocks */ - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | - SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); - au_writel(sys_clksrc, SYS_CLKSRC); - - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | - SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); - - switch (prid & 0x000000FF) { - case 0x00: /* DA */ - case 0x01: /* HA */ - case 0x02: /* HB */ - /* CPU core freq to 48 MHz to slow it way down... */ - au_writel(4, SYS_CPUPLL); - - /* - * Setup 48 MHz FREQ2 from CPUPLL for USB Host - * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz - */ - sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* CPU core freq to 384 MHz */ - au_writel(0x20, SYS_CPUPLL); - - printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n"); - break; - - default: /* HC and newer */ - /* FREQ2 = aux / 2 = 48 MHz */ - sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | - SYS_FC_FE2 | SYS_FC_FS2; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - break; - } - - /* - * Route 48 MHz FREQ2 into USB Host and/or Device - */ - sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT; - au_writel(sys_clksrc, SYS_CLKSRC); - - /* Configure pins GPIO[14:9] as GPIO */ - pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB); - - /* 2nd USB port is USB host */ - pin_func |= SYS_PF_USB; - - au_writel(pin_func, SYS_PINFUNC); - au_writel(0x2800, SYS_TRIOUTCLR); - au_writel(0x0030, SYS_OUTPUTCLR); -#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ - - /* Make GPIO 15 an input (for interrupt line) */ - pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF; - /* We don't need I2S, so make it available for GPIO[31:29] */ - pin_func |= SYS_PF_I2S; - au_writel(pin_func, SYS_PINFUNC); - - au_writel(0x8000, SYS_TRIOUTCLR); - - static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00; - au_writel(static_cfg0, MEM_STCFG0); - - /* configure RCE2* for LCD */ - au_writel(0x00000004, MEM_STCFG2); - - /* MEM_STTIME2 */ - au_writel(0x09000000, MEM_STTIME2); - - /* Set 32-bit base address decoding for RCE2* */ - au_writel(0x10003ff0, MEM_STADDR2); - - /* - * PCI CPLD setup - * Expand CE0 to cover PCI - */ - au_writel(0x11803e40, MEM_STADDR1); - - /* Burst visibility on */ - au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0); - - au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */ - au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */ - - /* Setup the static bus controller */ - au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ - au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ - au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ - - /* - * Enable Au1000 BCLK switching - note: sed1356 must not use - * its BCLK (Au1000 LCLK) for any timings - */ - switch (prid & 0x000000FF) { - case 0x00: /* DA */ - case 0x01: /* HA */ - case 0x02: /* HB */ - break; - default: /* HC and newer */ - /* - * Enable sys bus clock divider when IDLE state or no bus - * activity. - */ - au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); - break; - } -} diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c deleted file mode 100644 index 8a9c7d57208d..000000000000 --- a/arch/mips/au1000/pb1000/init.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Pb1000 board setup - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include - -#include - -const char *get_system_type(void) -{ - return "Alchemy Pb1000"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = (int)fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x04000000; - else - strict_strtol(memsize_str, 0, &memsize); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/au1000/pb1000/irqmap.c b/arch/mips/au1000/pb1000/irqmap.c deleted file mode 100644 index b3d56b0af321..000000000000 --- a/arch/mips/au1000/pb1000/irqmap.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 }, -}; - -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/au1000/pb1100/Makefile b/arch/mips/au1000/pb1100/Makefile deleted file mode 100644 index 793e97c49e46..000000000000 --- a/arch/mips/au1000/pb1100/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2001, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for the Alchemy Semiconductor Pb1100 board. -# - -lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/au1000/pb1100/board_setup.c deleted file mode 100644 index c0bfd59a7a36..000000000000 --- a/arch/mips/au1000/pb1100/board_setup.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Copyright 2002, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include -#include - -void board_reset(void) -{ - /* Hit BCSR.RST_VDDI[SOFT_RESET] */ - au_writel(0x00000000, PB1100_RST_VDDI); -} - -void __init board_setup(void) -{ - volatile void __iomem *base = (volatile void __iomem *)0xac000000UL; - - /* Set AUX clock to 12 MHz * 8 = 96 MHz */ - au_writel(8, SYS_AUXPLL); - au_writel(0, SYS_PININPUTEN); - udelay(100); - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - { - u32 pin_func, sys_freqctrl, sys_clksrc; - - /* Configure pins GPIO[14:9] as GPIO */ - pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; - - /* Zero and disable FREQ2 */ - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* Zero and disable USBH/USBD/IrDA clock */ - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK); - au_writel(sys_clksrc, SYS_CLKSRC); - - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK); - - /* FREQ2 = aux / 2 = 48 MHz */ - sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | - SYS_FC_FE2 | SYS_FC_FS2; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* - * Route 48 MHz FREQ2 into USBH/USBD/IrDA - */ - sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MIR_BIT; - au_writel(sys_clksrc, SYS_CLKSRC); - - /* Setup the static bus controller */ - au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ - au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ - au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ - - /* - * Get USB Functionality pin state (device vs host drive pins). - */ - pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB; - /* 2nd USB port is USB host. */ - pin_func |= SYS_PF_USB; - au_writel(pin_func, SYS_PINFUNC); - } -#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ - - /* Enable sys bus clock divider when IDLE state or no bus activity. */ - au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); - - /* Enable the RTC if not already enabled. */ - if (!(readb(base + 0x28) & 0x20)) { - writeb(readb(base + 0x28) | 0x20, base + 0x28); - au_sync(); - } - /* Put the clock in BCD mode. */ - if (readb(base + 0x2C) & 0x4) { /* reg B */ - writeb(readb(base + 0x2c) & ~0x4, base + 0x2c); - au_sync(); - } -} diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c deleted file mode 100644 index 7c6792308bc5..000000000000 --- a/arch/mips/au1000/pb1100/init.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Pb1100 board setup - * - * Copyright 2002, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include - -#include - -const char *get_system_type(void) -{ - return "Alchemy Pb1100"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg3; - - prom_init_cmdline(); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x04000000; - else - strict_strtol(memsize_str, 0, &memsize); - - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/au1000/pb1100/irqmap.c b/arch/mips/au1000/pb1100/irqmap.c deleted file mode 100644 index 9b7dd8b41283..000000000000 --- a/arch/mips/au1000/pb1100/irqmap.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xx0 IRQ map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#include - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */ - { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */ - { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */ - { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */ -}; - -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile deleted file mode 100644 index d678adf7ce85..000000000000 --- a/arch/mips/au1000/pb1200/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards. -# - -lib-y := init.o board_setup.o irqmap.o -obj-y += platform.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c deleted file mode 100644 index 6cb2115059ad..000000000000 --- a/arch/mips/au1000/pb1200/board_setup.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Pb1200/Db1200 board setup. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include -#include - -extern void _board_init_irq(void); -extern void (*board_init_irq)(void); - -void board_reset(void) -{ - bcsr->resets = 0; - bcsr->system = 0; -} - -void __init board_setup(void) -{ - char *argptr = NULL; - -#if 0 - { - u32 pin_func; - - /* - * Enable PSC1 SYNC for AC97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ - au_sync(); - } -#endif - -#if defined(CONFIG_I2C_AU1550) - { - u32 freq0, clksrc; - u32 pin_func; - - /* Select SMBus in CPLD */ - bcsr->resets &= ~BCSR_RESETS_PCS0MUX; - - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); - /* Set GPIOs correctly */ - pin_func |= 2 << 17; - au_writel(pin_func, SYS_PINFUNC); - au_sync(); - - /* The I2C driver depends on 50 MHz clock */ - freq0 = au_readl(SYS_FREQCTRL0); - au_sync(); - freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); - freq0 |= 3 << SYS_FC_FRDIV1_BIT; - /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - freq0 |= SYS_FC_FE1; - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - - clksrc = au_readl(SYS_CLKSRC); - au_sync(); - clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); - /* Bit 22 is EXTCLK0 for PSC0 */ - clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; - au_writel(clksrc, SYS_CLKSRC); - au_sync(); - } -#endif - -#ifdef CONFIG_FB_AU1200 - argptr = prom_getcmdline(); -#ifdef CONFIG_MIPS_PB1200 - strcat(argptr, " video=au1200fb:panel:bs"); -#endif -#ifdef CONFIG_MIPS_DB1200 - strcat(argptr, " video=au1200fb:panel:bs"); -#endif -#endif - - /* - * The Pb1200 development board uses external MUX for PSC0 to - * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI - */ -#ifdef CONFIG_I2C_AU1550 - bcsr->resets &= ~BCSR_RESETS_PCS0MUX; -#endif - au_sync(); - -#ifdef CONFIG_MIPS_PB1200 - printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1200 - printk(KERN_INFO "AMD Alchemy Db1200 Board\n"); -#endif - - /* Setup Pb1200 External Interrupt Controller */ - board_init_irq = _board_init_irq; -} - -int board_au1200fb_panel(void) -{ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - int p; - - p = bcsr->switches; - p >>= 8; - p &= 0x0F; - return p; -} - -int board_au1200fb_panel_init(void) -{ - /* Apply power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - - bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL; - /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ - return 0; -} - -int board_au1200fb_panel_shutdown(void) -{ - /* Remove power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - - bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL); - /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ - return 0; -} diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c deleted file mode 100644 index e9b2a0fd48ae..000000000000 --- a/arch/mips/au1000/pb1200/init.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * PB1200 board setup - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include - -#include - -const char *get_system_type(void) -{ - return "Alchemy Pb1200"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = (int)fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x08000000; - else - strict_strtol(memsize_str, 0, &memsize); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c deleted file mode 100644 index 2a505ad8715b..000000000000 --- a/arch/mips/au1000/pb1200/irqmap.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include - -#ifdef CONFIG_MIPS_PB1200 -#include -#endif - -#ifdef CONFIG_MIPS_DB1200 -#include -#define PB1200_INT_BEGIN DB1200_INT_BEGIN -#define PB1200_INT_END DB1200_INT_END -#endif - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - /* This is external interrupt cascade */ - { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, -}; - -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); - -/* - * Support for External interrupts on the Pb1200 Development platform. - */ -static volatile int pb1200_cascade_en; - -irqreturn_t pb1200_cascade_handler(int irq, void *dev_id) -{ - unsigned short bisr = bcsr->int_status; - int extirq_nr = 0; - - /* Clear all the edge interrupts. This has no effect on level. */ - bcsr->int_status = bisr; - for ( ; bisr; bisr &= bisr - 1) { - extirq_nr = PB1200_INT_BEGIN + __ffs(bisr); - /* Ack and dispatch IRQ */ - do_IRQ(extirq_nr); - } - - return IRQ_RETVAL(1); -} - -inline void pb1200_enable_irq(unsigned int irq_nr) -{ - bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN); - bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN); -} - -inline void pb1200_disable_irq(unsigned int irq_nr) -{ - bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN); - bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN); -} - -static unsigned int pb1200_setup_cascade(void) -{ - return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, - 0, "Pb1200 Cascade", &pb1200_cascade_handler); -} - -static unsigned int pb1200_startup_irq(unsigned int irq) -{ - if (++pb1200_cascade_en == 1) { - int res; - - res = pb1200_setup_cascade(); - if (res) - return res; - } - - pb1200_enable_irq(irq); - - return 0; -} - -static void pb1200_shutdown_irq(unsigned int irq) -{ - pb1200_disable_irq(irq); - if (--pb1200_cascade_en == 0) - free_irq(AU1000_GPIO_7, &pb1200_cascade_handler); -} - -static struct irq_chip external_irq_type = { -#ifdef CONFIG_MIPS_PB1200 - .name = "Pb1200 Ext", -#endif -#ifdef CONFIG_MIPS_DB1200 - .name = "Db1200 Ext", -#endif - .startup = pb1200_startup_irq, - .shutdown = pb1200_shutdown_irq, - .ack = pb1200_disable_irq, - .mask = pb1200_disable_irq, - .mask_ack = pb1200_disable_irq, - .unmask = pb1200_enable_irq, -}; - -void _board_init_irq(void) -{ - unsigned int irq; - -#ifdef CONFIG_MIPS_PB1200 - /* We have a problem with CPLD rev 3. */ - if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) { - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); - printk(KERN_ERR "updated to latest revision. This software will\n"); - printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - panic("Game over. Your score is 0."); - } -#endif - - for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) { - set_irq_chip_and_handler(irq, &external_irq_type, - handle_level_irq); - pb1200_disable_irq(irq); - } - - /* - * GPIO_7 can not be hooked here, so it is hooked upon first - * request of any source attached to the cascade. - */ -} diff --git a/arch/mips/au1000/pb1200/platform.c b/arch/mips/au1000/pb1200/platform.c deleted file mode 100644 index f8fb0aeac571..000000000000 --- a/arch/mips/au1000/pb1200/platform.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Pb1200/DBAu1200 board platform device registration - * - * Copyright (C) 2008 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include - -#include - -static struct resource ide_resources[] = { - [0] = { - .start = IDE_PHYS_ADDR, - .end = IDE_PHYS_ADDR + IDE_PHYS_LEN - 1, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = IDE_INT, - .end = IDE_INT, - .flags = IORESOURCE_IRQ - } -}; - -static u64 ide_dmamask = DMA_32BIT_MASK; - -static struct platform_device ide_device = { - .name = "au1200-ide", - .id = 0, - .dev = { - .dma_mask = &ide_dmamask, - .coherent_dma_mask = DMA_32BIT_MASK, - }, - .num_resources = ARRAY_SIZE(ide_resources), - .resource = ide_resources -}; - -static struct resource smc91c111_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = SMC91C111_PHYS_ADDR, - .end = SMC91C111_PHYS_ADDR + 0xf, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = SMC91C111_INT, - .end = SMC91C111_INT, - .flags = IORESOURCE_IRQ - }, -}; - -static struct platform_device smc91c111_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(smc91c111_resources), - .resource = smc91c111_resources -}; - -static struct platform_device *board_platform_devices[] __initdata = { - &ide_device, - &smc91c111_device -}; - -static int __init board_register_devices(void) -{ - return platform_add_devices(board_platform_devices, - ARRAY_SIZE(board_platform_devices)); -} - -arch_initcall(board_register_devices); diff --git a/arch/mips/au1000/pb1500/Makefile b/arch/mips/au1000/pb1500/Makefile deleted file mode 100644 index 602f38df20bb..000000000000 --- a/arch/mips/au1000/pb1500/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2001, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for the Alchemy Semiconductor Pb1500 board. -# - -lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/pb1500/board_setup.c b/arch/mips/au1000/pb1500/board_setup.c deleted file mode 100644 index 035771c6e5b8..000000000000 --- a/arch/mips/au1000/pb1500/board_setup.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include -#include - -void board_reset(void) -{ - /* Hit BCSR.RST_VDDI[SOFT_RESET] */ - au_writel(0x00000000, PB1500_RST_VDDI); -} - -void __init board_setup(void) -{ - u32 pin_func; - u32 sys_freqctrl, sys_clksrc; - - sys_clksrc = sys_freqctrl = pin_func = 0; - /* Set AUX clock to 12 MHz * 8 = 96 MHz */ - au_writel(8, SYS_AUXPLL); - au_writel(0, SYS_PINSTATERD); - udelay(100); - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - - /* GPIO201 is input for PCMCIA card detect */ - /* GPIO203 is input for PCMCIA interrupt request */ - au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR); - - /* Zero and disable FREQ2 */ - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* zero and disable USBH/USBD clocks */ - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | - SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); - au_writel(sys_clksrc, SYS_CLKSRC); - - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | - SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); - - /* FREQ2 = aux/2 = 48 MHz */ - sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2 | SYS_FC_FS2; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* - * Route 48MHz FREQ2 into USB Host and/or Device - */ - sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT; - au_writel(sys_clksrc, SYS_CLKSRC); - - pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB; - /* 2nd USB port is USB host */ - pin_func |= SYS_PF_USB; - au_writel(pin_func, SYS_PINFUNC); -#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ - -#ifdef CONFIG_PCI - /* Setup PCI bus controller */ - au_writel(0, Au1500_PCI_CMEM); - au_writel(0x00003fff, Au1500_CFG_BASE); -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif - au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); - au_writel(0, Au1500_PCI_MWBASE_REV_CCL); - au_writel(0x02a00356, Au1500_PCI_STATCMD); - au_writel(0x00003c04, Au1500_PCI_HDRTYPE); - au_writel(0x00000008, Au1500_PCI_MBAR); - au_sync(); -#endif - - /* Enable sys bus clock divider when IDLE state or no bus activity. */ - au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); - - /* Enable the RTC if not already enabled */ - if (!(au_readl(0xac000028) & 0x20)) { - printk(KERN_INFO "enabling clock ...\n"); - au_writel((au_readl(0xac000028) | 0x20), 0xac000028); - } - /* Put the clock in BCD mode */ - if (au_readl(0xac00002c) & 0x4) { /* reg B */ - au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c); - au_sync(); - } -} diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c deleted file mode 100644 index 3b6e395cf952..000000000000 --- a/arch/mips/au1000/pb1500/init.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Pb1500 board setup - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include - -#include - -const char *get_system_type(void) -{ - return "Alchemy Pb1500"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = (int)fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x04000000; - else - strict_strtol(memsize_str, 0, &memsize); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/au1000/pb1500/irqmap.c deleted file mode 100644 index 39c4682766a8..000000000000 --- a/arch/mips/au1000/pb1500/irqmap.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#include - -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ -}; - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, - { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, -}; - -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/au1000/pb1550/Makefile b/arch/mips/au1000/pb1550/Makefile deleted file mode 100644 index 7d8beca87fa5..000000000000 --- a/arch/mips/au1000/pb1550/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for the Alchemy Semiconductor Pb1550 board. -# - -lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/pb1550/board_setup.c b/arch/mips/au1000/pb1550/board_setup.c deleted file mode 100644 index 0ed76b64b6ab..000000000000 --- a/arch/mips/au1000/pb1550/board_setup.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Pb1550 board setup. - * - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#include -#include - -void board_reset(void) -{ - /* Hit BCSR.SYSTEM[RESET] */ - au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C); -} - -void __init board_setup(void) -{ - u32 pin_func; - - /* - * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ - au_sync(); - - printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); -} diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c deleted file mode 100644 index e1055a13a1a0..000000000000 --- a/arch/mips/au1000/pb1550/init.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Pb1550 board setup - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include - -#include - -const char *get_system_type(void) -{ - return "Alchemy Pb1550"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = (int)fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x08000000; - else - strict_strtol(memsize_str, 0, &memsize); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c deleted file mode 100644 index a02a4d1fa899..000000000000 --- a/arch/mips/au1000/pb1550/irqmap.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xx0 IRQ map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#include - -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ -}; - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, -}; - -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/au1000/xxs1500/Makefile b/arch/mips/au1000/xxs1500/Makefile deleted file mode 100644 index db3c526f64d8..000000000000 --- a/arch/mips/au1000/xxs1500/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2003 MontaVista Software Inc. -# Author: MontaVista Software, Inc. -# -# Makefile for MyCable XXS1500 board. -# - -lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c deleted file mode 100644 index 4c587acac5c3..000000000000 --- a/arch/mips/au1000/xxs1500/board_setup.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Copyright 2000-2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include - -void board_reset(void) -{ - /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ - au_writel(0x00000000, 0xAE00001C); -} - -void __init board_setup(void) -{ - u32 pin_func; - - /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ - pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; - pin_func |= SYS_PF_UR3; - au_writel(pin_func, SYS_PINFUNC); - - /* Enable UART */ - au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */ - mdelay(10); - au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ - mdelay(10); - - /* Enable DTR = USB power up */ - au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */ - -#ifdef CONFIG_PCMCIA_XXS1500 - /* Setup PCMCIA signals */ - au_writel(0, SYS_PININPUTEN); - - /* GPIO 0, 1, and 4 are inputs */ - au_writel(1 | (1 << 1) | (1 << 4), SYS_TRIOUTCLR); - - /* Enable GPIO2 if not already enabled */ - au_writel(1, GPIO2_ENABLE); - /* GPIO2 208/9/10/11 are inputs */ - au_writel((1 << 8) | (1 << 9) | (1 << 10) | (1 << 11), GPIO2_DIR); - - /* Turn off power */ - au_writel((au_readl(GPIO2_PINSTATE) & ~(1 << 14)) | (1 << 30), - GPIO2_OUTPUT); -#endif - -#ifdef CONFIG_PCI -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif -#endif -} diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c deleted file mode 100644 index 7516434760a1..000000000000 --- a/arch/mips/au1000/xxs1500/init.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * XXS1500 board setup - * - * Copyright 2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include - -#include - -const char *get_system_type(void) -{ - return "XXS1500"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x04000000; - else - strict_strtol(memsize_str, 0, &memsize); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c deleted file mode 100644 index edf06ed11870..000000000000 --- a/arch/mips/au1000/xxs1500/irqmap.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#include - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, - { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, - { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 }, - - { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */ - { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, -}; - -int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); -- cgit v1.2.3 From 384740dc49ea651ba350704d13ff6be9976e37fe Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 16 Sep 2008 19:48:51 +0200 Subject: MIPS: Move headfiles to new location below arch/mips/include Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 84 +- arch/mips/include/asm/Kbuild | 3 + arch/mips/include/asm/a.out.h | 35 + arch/mips/include/asm/abi.h | 25 + arch/mips/include/asm/addrspace.h | 154 ++ arch/mips/include/asm/asm.h | 409 +++++ arch/mips/include/asm/asmmacro-32.h | 158 ++ arch/mips/include/asm/asmmacro-64.h | 139 ++ arch/mips/include/asm/asmmacro.h | 82 + arch/mips/include/asm/atomic.h | 801 +++++++++ arch/mips/include/asm/auxvec.h | 4 + arch/mips/include/asm/barrier.h | 155 ++ arch/mips/include/asm/bcache.h | 60 + arch/mips/include/asm/bitops.h | 672 ++++++++ arch/mips/include/asm/bootinfo.h | 110 ++ arch/mips/include/asm/branch.h | 38 + arch/mips/include/asm/break.h | 34 + arch/mips/include/asm/bug.h | 33 + arch/mips/include/asm/bugs.h | 53 + arch/mips/include/asm/byteorder.h | 76 + arch/mips/include/asm/cache.h | 20 + arch/mips/include/asm/cachectl.h | 26 + arch/mips/include/asm/cacheflush.h | 116 ++ arch/mips/include/asm/cacheops.h | 85 + arch/mips/include/asm/checksum.h | 260 +++ arch/mips/include/asm/cmp.h | 18 + arch/mips/include/asm/cmpxchg.h | 124 ++ arch/mips/include/asm/compat-signal.h | 119 ++ arch/mips/include/asm/compat.h | 221 +++ arch/mips/include/asm/compiler.h | 19 + arch/mips/include/asm/cpu-features.h | 219 +++ arch/mips/include/asm/cpu-info.h | 84 + arch/mips/include/asm/cpu.h | 267 +++ arch/mips/include/asm/cputime.h | 6 + arch/mips/include/asm/current.h | 23 + arch/mips/include/asm/debug.h | 48 + arch/mips/include/asm/dec/ecc.h | 55 + arch/mips/include/asm/dec/interrupts.h | 126 ++ arch/mips/include/asm/dec/ioasic.h | 38 + arch/mips/include/asm/dec/ioasic_addrs.h | 152 ++ arch/mips/include/asm/dec/ioasic_ints.h | 74 + arch/mips/include/asm/dec/kn01.h | 90 + arch/mips/include/asm/dec/kn02.h | 91 + arch/mips/include/asm/dec/kn02ba.h | 67 + arch/mips/include/asm/dec/kn02ca.h | 79 + arch/mips/include/asm/dec/kn02xa.h | 84 + arch/mips/include/asm/dec/kn03.h | 74 + arch/mips/include/asm/dec/kn05.h | 76 + arch/mips/include/asm/dec/kn230.h | 26 + arch/mips/include/asm/dec/machtype.h | 27 + arch/mips/include/asm/dec/prom.h | 174 ++ arch/mips/include/asm/dec/system.h | 19 + arch/mips/include/asm/delay.h | 112 ++ arch/mips/include/asm/device.h | 7 + arch/mips/include/asm/div64.h | 110 ++ arch/mips/include/asm/dma-mapping.h | 81 + arch/mips/include/asm/dma.h | 315 ++++ arch/mips/include/asm/ds1286.h | 15 + arch/mips/include/asm/ds1287.h | 27 + arch/mips/include/asm/dsp.h | 85 + arch/mips/include/asm/edac.h | 34 + arch/mips/include/asm/elf.h | 371 ++++ arch/mips/include/asm/emergency-restart.h | 6 + arch/mips/include/asm/emma2rh/emma2rh.h | 333 ++++ arch/mips/include/asm/emma2rh/markeins.h | 75 + arch/mips/include/asm/errno.h | 131 ++ arch/mips/include/asm/fb.h | 19 + arch/mips/include/asm/fcntl.h | 61 + arch/mips/include/asm/fixmap.h | 118 ++ arch/mips/include/asm/floppy.h | 56 + arch/mips/include/asm/fpregdef.h | 99 ++ arch/mips/include/asm/fpu.h | 153 ++ arch/mips/include/asm/fpu_emulator.h | 37 + arch/mips/include/asm/futex.h | 203 +++ arch/mips/include/asm/fw/arc/hinv.h | 175 ++ arch/mips/include/asm/fw/arc/types.h | 86 + arch/mips/include/asm/fw/cfe/cfe_api.h | 122 ++ arch/mips/include/asm/fw/cfe/cfe_error.h | 80 + arch/mips/include/asm/gcmpregs.h | 117 ++ arch/mips/include/asm/gic.h | 487 ++++++ arch/mips/include/asm/gpio.h | 6 + arch/mips/include/asm/gt64120.h | 580 +++++++ arch/mips/include/asm/hardirq.h | 24 + arch/mips/include/asm/hazards.h | 271 +++ arch/mips/include/asm/highmem.h | 67 + arch/mips/include/asm/hw_irq.h | 20 + arch/mips/include/asm/i8253.h | 21 + arch/mips/include/asm/i8259.h | 86 + arch/mips/include/asm/ide.h | 13 + arch/mips/include/asm/inst.h | 394 +++++ arch/mips/include/asm/io.h | 589 +++++++ arch/mips/include/asm/ioctl.h | 94 ++ arch/mips/include/asm/ioctls.h | 109 ++ arch/mips/include/asm/ip32/crime.h | 158 ++ arch/mips/include/asm/ip32/ip32_ints.h | 114 ++ arch/mips/include/asm/ip32/mace.h | 365 ++++ arch/mips/include/asm/ipcbuf.h | 28 + arch/mips/include/asm/irq.h | 163 ++ arch/mips/include/asm/irq_cpu.h | 20 + arch/mips/include/asm/irq_gt641xx.h | 60 + arch/mips/include/asm/irq_regs.h | 21 + arch/mips/include/asm/irqflags.h | 283 ++++ arch/mips/include/asm/isadep.h | 34 + arch/mips/include/asm/jazz.h | 310 ++++ arch/mips/include/asm/jazzdma.h | 95 ++ arch/mips/include/asm/kdebug.h | 13 + arch/mips/include/asm/kexec.h | 30 + arch/mips/include/asm/kgdb.h | 44 + arch/mips/include/asm/kmap_types.h | 30 + arch/mips/include/asm/kspd.h | 36 + arch/mips/include/asm/lasat/ds1603.h | 18 + arch/mips/include/asm/lasat/eeprom.h | 17 + arch/mips/include/asm/lasat/head.h | 22 + arch/mips/include/asm/lasat/lasat.h | 258 +++ arch/mips/include/asm/lasat/lasatint.h | 14 + arch/mips/include/asm/lasat/picvue.h | 15 + arch/mips/include/asm/lasat/serial.h | 13 + arch/mips/include/asm/linkage.h | 10 + arch/mips/include/asm/local.h | 221 +++ arch/mips/include/asm/m48t35.h | 27 + arch/mips/include/asm/m48t37.h | 35 + arch/mips/include/asm/mach-au1x00/au1000.h | 1772 ++++++++++++++++++++ arch/mips/include/asm/mach-au1x00/au1000_dma.h | 458 +++++ arch/mips/include/asm/mach-au1x00/au1000_gpio.h | 56 + arch/mips/include/asm/mach-au1x00/au1100_mmc.h | 208 +++ arch/mips/include/asm/mach-au1x00/au1550_spi.h | 15 + arch/mips/include/asm/mach-au1x00/au1xxx.h | 43 + arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h | 386 +++++ arch/mips/include/asm/mach-au1x00/au1xxx_ide.h | 194 +++ arch/mips/include/asm/mach-au1x00/au1xxx_psc.h | 505 ++++++ arch/mips/include/asm/mach-au1x00/gpio.h | 69 + arch/mips/include/asm/mach-au1x00/ioremap.h | 42 + arch/mips/include/asm/mach-au1x00/prom.h | 13 + arch/mips/include/asm/mach-au1x00/war.h | 25 + arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 25 + arch/mips/include/asm/mach-bcm47xx/gpio.h | 59 + arch/mips/include/asm/mach-bcm47xx/war.h | 25 + arch/mips/include/asm/mach-cobalt/cobalt.h | 22 + .../asm/mach-cobalt/cpu-feature-overrides.h | 56 + arch/mips/include/asm/mach-cobalt/irq.h | 57 + arch/mips/include/asm/mach-cobalt/mach-gt64120.h | 27 + arch/mips/include/asm/mach-cobalt/war.h | 25 + arch/mips/include/asm/mach-db1x00/db1200.h | 230 +++ arch/mips/include/asm/mach-db1x00/db1x00.h | 179 ++ arch/mips/include/asm/mach-dec/mc146818rtc.h | 43 + arch/mips/include/asm/mach-dec/war.h | 25 + arch/mips/include/asm/mach-emma2rh/irq.h | 15 + arch/mips/include/asm/mach-emma2rh/war.h | 25 + .../asm/mach-excite/cpu-feature-overrides.h | 48 + arch/mips/include/asm/mach-excite/excite.h | 154 ++ arch/mips/include/asm/mach-excite/excite_fpga.h | 80 + .../include/asm/mach-excite/excite_nandflash.h | 7 + arch/mips/include/asm/mach-excite/rm9k_eth.h | 23 + arch/mips/include/asm/mach-excite/rm9k_wdt.h | 12 + arch/mips/include/asm/mach-excite/rm9k_xicap.h | 16 + arch/mips/include/asm/mach-excite/war.h | 25 + .../asm/mach-generic/cpu-feature-overrides.h | 13 + arch/mips/include/asm/mach-generic/dma-coherence.h | 45 + arch/mips/include/asm/mach-generic/floppy.h | 139 ++ arch/mips/include/asm/mach-generic/gpio.h | 21 + arch/mips/include/asm/mach-generic/ide.h | 167 ++ arch/mips/include/asm/mach-generic/ioremap.h | 34 + arch/mips/include/asm/mach-generic/irq.h | 45 + .../include/asm/mach-generic/kernel-entry-init.h | 25 + arch/mips/include/asm/mach-generic/kmalloc.h | 13 + arch/mips/include/asm/mach-generic/mangle-port.h | 52 + arch/mips/include/asm/mach-generic/mc146818rtc.h | 36 + arch/mips/include/asm/mach-generic/spaces.h | 85 + arch/mips/include/asm/mach-generic/topology.h | 1 + .../include/asm/mach-ip22/cpu-feature-overrides.h | 44 + arch/mips/include/asm/mach-ip22/ds1286.h | 18 + arch/mips/include/asm/mach-ip22/spaces.h | 27 + arch/mips/include/asm/mach-ip22/war.h | 29 + .../include/asm/mach-ip27/cpu-feature-overrides.h | 54 + arch/mips/include/asm/mach-ip27/dma-coherence.h | 50 + arch/mips/include/asm/mach-ip27/irq.h | 22 + .../mips/include/asm/mach-ip27/kernel-entry-init.h | 59 + arch/mips/include/asm/mach-ip27/kmalloc.h | 8 + arch/mips/include/asm/mach-ip27/mangle-port.h | 25 + arch/mips/include/asm/mach-ip27/mmzone.h | 36 + arch/mips/include/asm/mach-ip27/spaces.h | 30 + arch/mips/include/asm/mach-ip27/topology.h | 59 + arch/mips/include/asm/mach-ip27/war.h | 25 + .../include/asm/mach-ip28/cpu-feature-overrides.h | 50 + arch/mips/include/asm/mach-ip28/ds1286.h | 4 + arch/mips/include/asm/mach-ip28/spaces.h | 22 + arch/mips/include/asm/mach-ip28/war.h | 25 + .../include/asm/mach-ip32/cpu-feature-overrides.h | 50 + arch/mips/include/asm/mach-ip32/dma-coherence.h | 72 + arch/mips/include/asm/mach-ip32/kmalloc.h | 11 + arch/mips/include/asm/mach-ip32/mangle-port.h | 26 + arch/mips/include/asm/mach-ip32/mc146818rtc.h | 36 + arch/mips/include/asm/mach-ip32/war.h | 25 + arch/mips/include/asm/mach-jazz/dma-coherence.h | 40 + arch/mips/include/asm/mach-jazz/floppy.h | 135 ++ arch/mips/include/asm/mach-jazz/mc146818rtc.h | 38 + arch/mips/include/asm/mach-jazz/war.h | 25 + arch/mips/include/asm/mach-lasat/irq.h | 13 + arch/mips/include/asm/mach-lasat/mach-gt64120.h | 27 + arch/mips/include/asm/mach-lasat/war.h | 25 + arch/mips/include/asm/mach-lemote/dma-coherence.h | 42 + arch/mips/include/asm/mach-lemote/mc146818rtc.h | 36 + arch/mips/include/asm/mach-lemote/war.h | 25 + .../include/asm/mach-malta/cpu-feature-overrides.h | 72 + arch/mips/include/asm/mach-malta/irq.h | 9 + .../include/asm/mach-malta/kernel-entry-init.h | 52 + arch/mips/include/asm/mach-malta/mach-gt64120.h | 19 + arch/mips/include/asm/mach-malta/mc146818rtc.h | 48 + arch/mips/include/asm/mach-malta/war.h | 25 + .../asm/mach-mipssim/cpu-feature-overrides.h | 65 + arch/mips/include/asm/mach-mipssim/war.h | 25 + arch/mips/include/asm/mach-pb1x00/mc146818rtc.h | 34 + arch/mips/include/asm/mach-pb1x00/pb1000.h | 87 + arch/mips/include/asm/mach-pb1x00/pb1100.h | 85 + arch/mips/include/asm/mach-pb1x00/pb1200.h | 259 +++ arch/mips/include/asm/mach-pb1x00/pb1500.h | 49 + arch/mips/include/asm/mach-pb1x00/pb1550.h | 177 ++ arch/mips/include/asm/mach-pnx8550/cm.h | 43 + arch/mips/include/asm/mach-pnx8550/glb.h | 86 + arch/mips/include/asm/mach-pnx8550/int.h | 140 ++ .../include/asm/mach-pnx8550/kernel-entry-init.h | 262 +++ arch/mips/include/asm/mach-pnx8550/nand.h | 121 ++ arch/mips/include/asm/mach-pnx8550/pci.h | 185 ++ arch/mips/include/asm/mach-pnx8550/uart.h | 30 + arch/mips/include/asm/mach-pnx8550/usb.h | 32 + arch/mips/include/asm/mach-pnx8550/war.h | 25 + .../asm/mach-rc32434/cpu-feature-overrides.h | 81 + arch/mips/include/asm/mach-rc32434/ddr.h | 141 ++ arch/mips/include/asm/mach-rc32434/dma.h | 103 ++ arch/mips/include/asm/mach-rc32434/dma_v.h | 52 + arch/mips/include/asm/mach-rc32434/eth.h | 220 +++ arch/mips/include/asm/mach-rc32434/gpio.h | 88 + arch/mips/include/asm/mach-rc32434/integ.h | 59 + arch/mips/include/asm/mach-rc32434/irq.h | 33 + arch/mips/include/asm/mach-rc32434/pci.h | 481 ++++++ arch/mips/include/asm/mach-rc32434/prom.h | 40 + arch/mips/include/asm/mach-rc32434/rb.h | 84 + arch/mips/include/asm/mach-rc32434/rc32434.h | 19 + arch/mips/include/asm/mach-rc32434/timer.h | 65 + arch/mips/include/asm/mach-rc32434/war.h | 25 + .../include/asm/mach-rm/cpu-feature-overrides.h | 43 + arch/mips/include/asm/mach-rm/mc146818rtc.h | 21 + arch/mips/include/asm/mach-rm/war.h | 29 + .../asm/mach-sibyte/cpu-feature-overrides.h | 47 + arch/mips/include/asm/mach-sibyte/war.h | 37 + arch/mips/include/asm/mach-tx39xx/ioremap.h | 38 + arch/mips/include/asm/mach-tx39xx/mangle-port.h | 23 + arch/mips/include/asm/mach-tx39xx/war.h | 25 + .../asm/mach-tx49xx/cpu-feature-overrides.h | 23 + arch/mips/include/asm/mach-tx49xx/ioremap.h | 43 + arch/mips/include/asm/mach-tx49xx/kmalloc.h | 8 + arch/mips/include/asm/mach-tx49xx/war.h | 25 + arch/mips/include/asm/mach-vr41xx/irq.h | 8 + arch/mips/include/asm/mach-vr41xx/war.h | 25 + arch/mips/include/asm/mach-wrppmc/mach-gt64120.h | 83 + arch/mips/include/asm/mach-wrppmc/war.h | 25 + .../asm/mach-yosemite/cpu-feature-overrides.h | 47 + arch/mips/include/asm/mach-yosemite/war.h | 25 + arch/mips/include/asm/mc146818-time.h | 119 ++ arch/mips/include/asm/mc146818rtc.h | 16 + arch/mips/include/asm/mips-boards/bonito64.h | 436 +++++ arch/mips/include/asm/mips-boards/generic.h | 104 ++ arch/mips/include/asm/mips-boards/launch.h | 35 + arch/mips/include/asm/mips-boards/malta.h | 102 ++ arch/mips/include/asm/mips-boards/maltaint.h | 110 ++ arch/mips/include/asm/mips-boards/msc01_pci.h | 258 +++ arch/mips/include/asm/mips-boards/piix4.h | 80 + arch/mips/include/asm/mips-boards/prom.h | 47 + arch/mips/include/asm/mips-boards/sim.h | 40 + arch/mips/include/asm/mips-boards/simint.h | 31 + arch/mips/include/asm/mips_mt.h | 26 + arch/mips/include/asm/mipsmtregs.h | 395 +++++ arch/mips/include/asm/mipsprom.h | 76 + arch/mips/include/asm/mipsregs.h | 1526 +++++++++++++++++ arch/mips/include/asm/mman.h | 77 + arch/mips/include/asm/mmu.h | 6 + arch/mips/include/asm/mmu_context.h | 297 ++++ arch/mips/include/asm/mmzone.h | 17 + arch/mips/include/asm/module.h | 136 ++ arch/mips/include/asm/msc01_ic.h | 148 ++ arch/mips/include/asm/msgbuf.h | 47 + arch/mips/include/asm/mutex.h | 9 + arch/mips/include/asm/nile4.h | 310 ++++ arch/mips/include/asm/paccess.h | 112 ++ arch/mips/include/asm/page.h | 191 +++ arch/mips/include/asm/param.h | 31 + arch/mips/include/asm/parport.h | 15 + arch/mips/include/asm/pci.h | 179 ++ arch/mips/include/asm/pci/bridge.h | 854 ++++++++++ arch/mips/include/asm/percpu.h | 6 + arch/mips/include/asm/pgalloc.h | 143 ++ arch/mips/include/asm/pgtable-32.h | 234 +++ arch/mips/include/asm/pgtable-64.h | 253 +++ arch/mips/include/asm/pgtable-bits.h | 137 ++ arch/mips/include/asm/pgtable.h | 383 +++++ arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h | 46 + .../include/asm/pmc-sierra/msp71xx/msp_cic_int.h | 151 ++ arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h | 43 + arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h | 205 +++ .../mips/include/asm/pmc-sierra/msp71xx/msp_prom.h | 176 ++ .../include/asm/pmc-sierra/msp71xx/msp_regops.h | 236 +++ .../mips/include/asm/pmc-sierra/msp71xx/msp_regs.h | 663 ++++++++ .../include/asm/pmc-sierra/msp71xx/msp_slp_int.h | 141 ++ arch/mips/include/asm/pmc-sierra/msp71xx/war.h | 28 + arch/mips/include/asm/pmon.h | 46 + arch/mips/include/asm/poll.h | 9 + arch/mips/include/asm/posix_types.h | 144 ++ arch/mips/include/asm/prefetch.h | 87 + arch/mips/include/asm/processor.h | 263 +++ arch/mips/include/asm/ptrace.h | 102 ++ arch/mips/include/asm/r4k-timer.h | 30 + arch/mips/include/asm/r4kcache.h | 443 +++++ arch/mips/include/asm/reboot.h | 15 + arch/mips/include/asm/reg.h | 128 ++ arch/mips/include/asm/regdef.h | 100 ++ arch/mips/include/asm/resource.h | 35 + arch/mips/include/asm/rm9k-ocd.h | 56 + arch/mips/include/asm/rtlx.h | 65 + arch/mips/include/asm/scatterlist.h | 28 + arch/mips/include/asm/seccomp.h | 37 + arch/mips/include/asm/sections.h | 6 + arch/mips/include/asm/segment.h | 6 + arch/mips/include/asm/sembuf.h | 22 + arch/mips/include/asm/serial.h | 22 + arch/mips/include/asm/setup.h | 10 + arch/mips/include/asm/sgi/gio.h | 86 + arch/mips/include/asm/sgi/hpc3.h | 317 ++++ arch/mips/include/asm/sgi/ioc.h | 200 +++ arch/mips/include/asm/sgi/ip22.h | 78 + arch/mips/include/asm/sgi/mc.h | 231 +++ arch/mips/include/asm/sgi/pi1.h | 71 + arch/mips/include/asm/sgi/seeq.h | 21 + arch/mips/include/asm/sgi/sgi.h | 47 + arch/mips/include/asm/sgi/wd.h | 20 + arch/mips/include/asm/sgialib.h | 124 ++ arch/mips/include/asm/sgiarcs.h | 548 ++++++ arch/mips/include/asm/sgidefs.h | 44 + arch/mips/include/asm/shmbuf.h | 38 + arch/mips/include/asm/shmparam.h | 13 + arch/mips/include/asm/sibyte/bcm1480_int.h | 312 ++++ arch/mips/include/asm/sibyte/bcm1480_l2c.h | 176 ++ arch/mips/include/asm/sibyte/bcm1480_mc.h | 984 +++++++++++ arch/mips/include/asm/sibyte/bcm1480_regs.h | 902 ++++++++++ arch/mips/include/asm/sibyte/bcm1480_scd.h | 406 +++++ arch/mips/include/asm/sibyte/bigsur.h | 49 + arch/mips/include/asm/sibyte/board.h | 68 + arch/mips/include/asm/sibyte/carmel.h | 58 + arch/mips/include/asm/sibyte/sb1250.h | 68 + arch/mips/include/asm/sibyte/sb1250_defs.h | 259 +++ arch/mips/include/asm/sibyte/sb1250_dma.h | 594 +++++++ arch/mips/include/asm/sibyte/sb1250_genbus.h | 474 ++++++ arch/mips/include/asm/sibyte/sb1250_int.h | 248 +++ arch/mips/include/asm/sibyte/sb1250_l2c.h | 131 ++ arch/mips/include/asm/sibyte/sb1250_ldt.h | 423 +++++ arch/mips/include/asm/sibyte/sb1250_mac.h | 656 ++++++++ arch/mips/include/asm/sibyte/sb1250_mc.h | 550 ++++++ arch/mips/include/asm/sibyte/sb1250_regs.h | 893 ++++++++++ arch/mips/include/asm/sibyte/sb1250_scd.h | 654 ++++++++ arch/mips/include/asm/sibyte/sb1250_smbus.h | 204 +++ arch/mips/include/asm/sibyte/sb1250_syncser.h | 146 ++ arch/mips/include/asm/sibyte/sb1250_uart.h | 362 ++++ arch/mips/include/asm/sibyte/sentosa.h | 40 + arch/mips/include/asm/sibyte/swarm.h | 64 + arch/mips/include/asm/sigcontext.h | 100 ++ arch/mips/include/asm/siginfo.h | 130 ++ arch/mips/include/asm/signal.h | 139 ++ arch/mips/include/asm/sim.h | 82 + arch/mips/include/asm/smp-ops.h | 57 + arch/mips/include/asm/smp.h | 63 + arch/mips/include/asm/smtc.h | 71 + arch/mips/include/asm/smtc_ipi.h | 128 ++ arch/mips/include/asm/smtc_proc.h | 23 + arch/mips/include/asm/smvp.h | 19 + arch/mips/include/asm/sn/addrs.h | 430 +++++ arch/mips/include/asm/sn/agent.h | 46 + arch/mips/include/asm/sn/arch.h | 64 + arch/mips/include/asm/sn/fru.h | 44 + arch/mips/include/asm/sn/gda.h | 107 ++ arch/mips/include/asm/sn/hub.h | 16 + arch/mips/include/asm/sn/intr.h | 129 ++ arch/mips/include/asm/sn/io.h | 59 + arch/mips/include/asm/sn/ioc3.h | 663 ++++++++ arch/mips/include/asm/sn/klconfig.h | 898 ++++++++++ arch/mips/include/asm/sn/kldir.h | 217 +++ arch/mips/include/asm/sn/klkernvars.h | 29 + arch/mips/include/asm/sn/launch.h | 106 ++ arch/mips/include/asm/sn/mapped_kernel.h | 54 + arch/mips/include/asm/sn/nmi.h | 125 ++ arch/mips/include/asm/sn/sn0/addrs.h | 288 ++++ arch/mips/include/asm/sn/sn0/arch.h | 72 + arch/mips/include/asm/sn/sn0/hub.h | 40 + arch/mips/include/asm/sn/sn0/hubio.h | 972 +++++++++++ arch/mips/include/asm/sn/sn0/hubmd.h | 789 +++++++++ arch/mips/include/asm/sn/sn0/hubni.h | 255 +++ arch/mips/include/asm/sn/sn0/hubpi.h | 409 +++++ arch/mips/include/asm/sn/sn0/ip27.h | 85 + arch/mips/include/asm/sn/sn_private.h | 19 + arch/mips/include/asm/sn/types.h | 26 + arch/mips/include/asm/sni.h | 244 +++ arch/mips/include/asm/socket.h | 117 ++ arch/mips/include/asm/sockios.h | 26 + arch/mips/include/asm/sparsemem.h | 14 + arch/mips/include/asm/spinlock.h | 376 +++++ arch/mips/include/asm/spinlock_types.h | 20 + arch/mips/include/asm/stackframe.h | 574 +++++++ arch/mips/include/asm/stacktrace.h | 48 + arch/mips/include/asm/stat.h | 132 ++ arch/mips/include/asm/statfs.h | 96 ++ arch/mips/include/asm/string.h | 143 ++ arch/mips/include/asm/suspend.h | 6 + arch/mips/include/asm/sysmips.h | 25 + arch/mips/include/asm/system.h | 220 +++ arch/mips/include/asm/termbits.h | 226 +++ arch/mips/include/asm/termios.h | 132 ++ arch/mips/include/asm/thread_info.h | 151 ++ arch/mips/include/asm/time.h | 79 + arch/mips/include/asm/timex.h | 43 + arch/mips/include/asm/titan_dep.h | 231 +++ arch/mips/include/asm/tlb.h | 23 + arch/mips/include/asm/tlbdebug.h | 16 + arch/mips/include/asm/tlbflush.h | 47 + arch/mips/include/asm/topology.h | 17 + arch/mips/include/asm/traps.h | 28 + arch/mips/include/asm/txx9/boards.h | 13 + arch/mips/include/asm/txx9/generic.h | 89 + arch/mips/include/asm/txx9/jmr3927.h | 180 ++ arch/mips/include/asm/txx9/pci.h | 39 + arch/mips/include/asm/txx9/rbtx4927.h | 92 + arch/mips/include/asm/txx9/rbtx4938.h | 145 ++ arch/mips/include/asm/txx9/rbtx4939.h | 133 ++ arch/mips/include/asm/txx9/smsc_fdc37m81x.h | 68 + arch/mips/include/asm/txx9/spi.h | 34 + arch/mips/include/asm/txx9/tx3927.h | 341 ++++ arch/mips/include/asm/txx9/tx4927.h | 269 +++ arch/mips/include/asm/txx9/tx4927pcic.h | 203 +++ arch/mips/include/asm/txx9/tx4938.h | 295 ++++ arch/mips/include/asm/txx9/tx4939.h | 544 ++++++ arch/mips/include/asm/txx9irq.h | 34 + arch/mips/include/asm/txx9pio.h | 29 + arch/mips/include/asm/txx9tmr.h | 67 + arch/mips/include/asm/types.h | 54 + arch/mips/include/asm/uaccess.h | 852 ++++++++++ arch/mips/include/asm/ucontext.h | 21 + arch/mips/include/asm/unaligned.h | 28 + arch/mips/include/asm/unistd.h | 1037 ++++++++++++ arch/mips/include/asm/user.h | 58 + arch/mips/include/asm/vga.h | 47 + arch/mips/include/asm/vpe.h | 37 + arch/mips/include/asm/vr41xx/capcella.h | 43 + arch/mips/include/asm/vr41xx/giu.h | 78 + arch/mips/include/asm/vr41xx/irq.h | 101 ++ arch/mips/include/asm/vr41xx/mpc30x.h | 37 + arch/mips/include/asm/vr41xx/pci.h | 90 + arch/mips/include/asm/vr41xx/siu.h | 58 + arch/mips/include/asm/vr41xx/tb0219.h | 42 + arch/mips/include/asm/vr41xx/tb0226.h | 43 + arch/mips/include/asm/vr41xx/tb0287.h | 43 + arch/mips/include/asm/vr41xx/vr41xx.h | 152 ++ arch/mips/include/asm/war.h | 244 +++ arch/mips/include/asm/wbflush.h | 34 + arch/mips/include/asm/xor.h | 1 + arch/mips/include/asm/xtalk/xtalk.h | 52 + arch/mips/include/asm/xtalk/xwidget.h | 167 ++ include/asm-mips/Kbuild | 3 - include/asm-mips/a.out.h | 35 - include/asm-mips/abi.h | 25 - include/asm-mips/addrspace.h | 154 -- include/asm-mips/asm.h | 409 ----- include/asm-mips/asmmacro-32.h | 158 -- include/asm-mips/asmmacro-64.h | 139 -- include/asm-mips/asmmacro.h | 82 - include/asm-mips/atomic.h | 801 --------- include/asm-mips/auxvec.h | 4 - include/asm-mips/barrier.h | 155 -- include/asm-mips/bcache.h | 60 - include/asm-mips/bitops.h | 672 -------- include/asm-mips/bootinfo.h | 110 -- include/asm-mips/branch.h | 38 - include/asm-mips/break.h | 34 - include/asm-mips/bug.h | 33 - include/asm-mips/bugs.h | 53 - include/asm-mips/byteorder.h | 76 - include/asm-mips/cache.h | 20 - include/asm-mips/cachectl.h | 26 - include/asm-mips/cacheflush.h | 116 -- include/asm-mips/cacheops.h | 85 - include/asm-mips/checksum.h | 260 --- include/asm-mips/cmp.h | 18 - include/asm-mips/cmpxchg.h | 124 -- include/asm-mips/compat-signal.h | 119 -- include/asm-mips/compat.h | 221 --- include/asm-mips/compiler.h | 19 - include/asm-mips/cpu-features.h | 219 --- include/asm-mips/cpu-info.h | 84 - include/asm-mips/cpu.h | 267 --- include/asm-mips/cputime.h | 6 - include/asm-mips/current.h | 23 - include/asm-mips/debug.h | 48 - include/asm-mips/dec/ecc.h | 55 - include/asm-mips/dec/interrupts.h | 126 -- include/asm-mips/dec/ioasic.h | 38 - include/asm-mips/dec/ioasic_addrs.h | 152 -- include/asm-mips/dec/ioasic_ints.h | 74 - include/asm-mips/dec/kn01.h | 90 - include/asm-mips/dec/kn02.h | 91 - include/asm-mips/dec/kn02ba.h | 67 - include/asm-mips/dec/kn02ca.h | 79 - include/asm-mips/dec/kn02xa.h | 84 - include/asm-mips/dec/kn03.h | 74 - include/asm-mips/dec/kn05.h | 76 - include/asm-mips/dec/kn230.h | 26 - include/asm-mips/dec/machtype.h | 27 - include/asm-mips/dec/prom.h | 174 -- include/asm-mips/dec/system.h | 19 - include/asm-mips/delay.h | 112 -- include/asm-mips/device.h | 7 - include/asm-mips/div64.h | 110 -- include/asm-mips/dma-mapping.h | 81 - include/asm-mips/dma.h | 315 ---- include/asm-mips/ds1286.h | 15 - include/asm-mips/ds1287.h | 27 - include/asm-mips/dsp.h | 85 - include/asm-mips/edac.h | 34 - include/asm-mips/elf.h | 371 ---- include/asm-mips/emergency-restart.h | 6 - include/asm-mips/emma2rh/emma2rh.h | 333 ---- include/asm-mips/emma2rh/markeins.h | 75 - include/asm-mips/errno.h | 131 -- include/asm-mips/fb.h | 19 - include/asm-mips/fcntl.h | 61 - include/asm-mips/fixmap.h | 118 -- include/asm-mips/floppy.h | 56 - include/asm-mips/fpregdef.h | 99 -- include/asm-mips/fpu.h | 153 -- include/asm-mips/fpu_emulator.h | 37 - include/asm-mips/futex.h | 203 --- include/asm-mips/fw/arc/hinv.h | 175 -- include/asm-mips/fw/arc/types.h | 86 - include/asm-mips/fw/cfe/cfe_api.h | 122 -- include/asm-mips/fw/cfe/cfe_error.h | 80 - include/asm-mips/gcmpregs.h | 117 -- include/asm-mips/gic.h | 487 ------ include/asm-mips/gpio.h | 6 - include/asm-mips/gt64120.h | 580 ------- include/asm-mips/hardirq.h | 24 - include/asm-mips/hazards.h | 271 --- include/asm-mips/highmem.h | 67 - include/asm-mips/hw_irq.h | 20 - include/asm-mips/i8253.h | 21 - include/asm-mips/i8259.h | 86 - include/asm-mips/ide.h | 13 - include/asm-mips/inst.h | 394 ----- include/asm-mips/io.h | 589 ------- include/asm-mips/ioctl.h | 94 -- include/asm-mips/ioctls.h | 109 -- include/asm-mips/ip32/crime.h | 158 -- include/asm-mips/ip32/ip32_ints.h | 114 -- include/asm-mips/ip32/mace.h | 365 ---- include/asm-mips/ipcbuf.h | 28 - include/asm-mips/irq.h | 163 -- include/asm-mips/irq_cpu.h | 20 - include/asm-mips/irq_gt641xx.h | 60 - include/asm-mips/irq_regs.h | 21 - include/asm-mips/irqflags.h | 283 ---- include/asm-mips/isadep.h | 34 - include/asm-mips/jazz.h | 310 ---- include/asm-mips/jazzdma.h | 95 -- include/asm-mips/kdebug.h | 13 - include/asm-mips/kexec.h | 30 - include/asm-mips/kgdb.h | 44 - include/asm-mips/kmap_types.h | 30 - include/asm-mips/kspd.h | 36 - include/asm-mips/lasat/ds1603.h | 18 - include/asm-mips/lasat/eeprom.h | 17 - include/asm-mips/lasat/head.h | 22 - include/asm-mips/lasat/lasat.h | 258 --- include/asm-mips/lasat/lasatint.h | 14 - include/asm-mips/lasat/picvue.h | 15 - include/asm-mips/lasat/serial.h | 13 - include/asm-mips/linkage.h | 10 - include/asm-mips/local.h | 221 --- include/asm-mips/m48t35.h | 27 - include/asm-mips/m48t37.h | 35 - include/asm-mips/mach-au1x00/au1000.h | 1772 -------------------- include/asm-mips/mach-au1x00/au1000_dma.h | 458 ----- include/asm-mips/mach-au1x00/au1000_gpio.h | 56 - include/asm-mips/mach-au1x00/au1100_mmc.h | 208 --- include/asm-mips/mach-au1x00/au1550_spi.h | 15 - include/asm-mips/mach-au1x00/au1xxx.h | 43 - include/asm-mips/mach-au1x00/au1xxx_dbdma.h | 386 ----- include/asm-mips/mach-au1x00/au1xxx_ide.h | 194 --- include/asm-mips/mach-au1x00/au1xxx_psc.h | 505 ------ include/asm-mips/mach-au1x00/gpio.h | 69 - include/asm-mips/mach-au1x00/ioremap.h | 42 - include/asm-mips/mach-au1x00/prom.h | 13 - include/asm-mips/mach-au1x00/war.h | 25 - include/asm-mips/mach-bcm47xx/bcm47xx.h | 25 - include/asm-mips/mach-bcm47xx/gpio.h | 59 - include/asm-mips/mach-bcm47xx/war.h | 25 - include/asm-mips/mach-cobalt/cobalt.h | 22 - .../asm-mips/mach-cobalt/cpu-feature-overrides.h | 56 - include/asm-mips/mach-cobalt/irq.h | 57 - include/asm-mips/mach-cobalt/mach-gt64120.h | 27 - include/asm-mips/mach-cobalt/war.h | 25 - include/asm-mips/mach-db1x00/db1200.h | 230 --- include/asm-mips/mach-db1x00/db1x00.h | 179 -- include/asm-mips/mach-dec/mc146818rtc.h | 43 - include/asm-mips/mach-dec/war.h | 25 - include/asm-mips/mach-emma2rh/irq.h | 15 - include/asm-mips/mach-emma2rh/war.h | 25 - .../asm-mips/mach-excite/cpu-feature-overrides.h | 48 - include/asm-mips/mach-excite/excite.h | 154 -- include/asm-mips/mach-excite/excite_fpga.h | 80 - include/asm-mips/mach-excite/excite_nandflash.h | 7 - include/asm-mips/mach-excite/rm9k_eth.h | 23 - include/asm-mips/mach-excite/rm9k_wdt.h | 12 - include/asm-mips/mach-excite/rm9k_xicap.h | 16 - include/asm-mips/mach-excite/war.h | 25 - .../asm-mips/mach-generic/cpu-feature-overrides.h | 13 - include/asm-mips/mach-generic/dma-coherence.h | 45 - include/asm-mips/mach-generic/floppy.h | 139 -- include/asm-mips/mach-generic/gpio.h | 21 - include/asm-mips/mach-generic/ide.h | 167 -- include/asm-mips/mach-generic/ioremap.h | 34 - include/asm-mips/mach-generic/irq.h | 45 - include/asm-mips/mach-generic/kernel-entry-init.h | 25 - include/asm-mips/mach-generic/kmalloc.h | 13 - include/asm-mips/mach-generic/mangle-port.h | 52 - include/asm-mips/mach-generic/mc146818rtc.h | 36 - include/asm-mips/mach-generic/spaces.h | 85 - include/asm-mips/mach-generic/topology.h | 1 - include/asm-mips/mach-ip22/cpu-feature-overrides.h | 44 - include/asm-mips/mach-ip22/ds1286.h | 18 - include/asm-mips/mach-ip22/spaces.h | 27 - include/asm-mips/mach-ip22/war.h | 29 - include/asm-mips/mach-ip27/cpu-feature-overrides.h | 54 - include/asm-mips/mach-ip27/dma-coherence.h | 50 - include/asm-mips/mach-ip27/irq.h | 22 - include/asm-mips/mach-ip27/kernel-entry-init.h | 59 - include/asm-mips/mach-ip27/kmalloc.h | 8 - include/asm-mips/mach-ip27/mangle-port.h | 25 - include/asm-mips/mach-ip27/mmzone.h | 36 - include/asm-mips/mach-ip27/spaces.h | 30 - include/asm-mips/mach-ip27/topology.h | 59 - include/asm-mips/mach-ip27/war.h | 25 - include/asm-mips/mach-ip28/cpu-feature-overrides.h | 50 - include/asm-mips/mach-ip28/ds1286.h | 4 - include/asm-mips/mach-ip28/spaces.h | 22 - include/asm-mips/mach-ip28/war.h | 25 - include/asm-mips/mach-ip32/cpu-feature-overrides.h | 50 - include/asm-mips/mach-ip32/dma-coherence.h | 72 - include/asm-mips/mach-ip32/kmalloc.h | 11 - include/asm-mips/mach-ip32/mangle-port.h | 26 - include/asm-mips/mach-ip32/mc146818rtc.h | 36 - include/asm-mips/mach-ip32/war.h | 25 - include/asm-mips/mach-jazz/dma-coherence.h | 40 - include/asm-mips/mach-jazz/floppy.h | 135 -- include/asm-mips/mach-jazz/mc146818rtc.h | 38 - include/asm-mips/mach-jazz/war.h | 25 - include/asm-mips/mach-lasat/irq.h | 13 - include/asm-mips/mach-lasat/mach-gt64120.h | 27 - include/asm-mips/mach-lasat/war.h | 25 - include/asm-mips/mach-lemote/dma-coherence.h | 42 - include/asm-mips/mach-lemote/mc146818rtc.h | 36 - include/asm-mips/mach-lemote/war.h | 25 - .../asm-mips/mach-malta/cpu-feature-overrides.h | 72 - include/asm-mips/mach-malta/irq.h | 9 - include/asm-mips/mach-malta/kernel-entry-init.h | 52 - include/asm-mips/mach-malta/mach-gt64120.h | 19 - include/asm-mips/mach-malta/mc146818rtc.h | 48 - include/asm-mips/mach-malta/war.h | 25 - .../asm-mips/mach-mipssim/cpu-feature-overrides.h | 65 - include/asm-mips/mach-mipssim/war.h | 25 - include/asm-mips/mach-pb1x00/mc146818rtc.h | 34 - include/asm-mips/mach-pb1x00/pb1000.h | 87 - include/asm-mips/mach-pb1x00/pb1100.h | 85 - include/asm-mips/mach-pb1x00/pb1200.h | 259 --- include/asm-mips/mach-pb1x00/pb1500.h | 49 - include/asm-mips/mach-pb1x00/pb1550.h | 177 -- include/asm-mips/mach-pnx8550/cm.h | 43 - include/asm-mips/mach-pnx8550/glb.h | 86 - include/asm-mips/mach-pnx8550/int.h | 140 -- include/asm-mips/mach-pnx8550/kernel-entry-init.h | 262 --- include/asm-mips/mach-pnx8550/nand.h | 121 -- include/asm-mips/mach-pnx8550/pci.h | 185 -- include/asm-mips/mach-pnx8550/uart.h | 30 - include/asm-mips/mach-pnx8550/usb.h | 32 - include/asm-mips/mach-pnx8550/war.h | 25 - .../asm-mips/mach-rc32434/cpu-feature-overrides.h | 81 - include/asm-mips/mach-rc32434/ddr.h | 141 -- include/asm-mips/mach-rc32434/dma.h | 103 -- include/asm-mips/mach-rc32434/dma_v.h | 52 - include/asm-mips/mach-rc32434/eth.h | 220 --- include/asm-mips/mach-rc32434/gpio.h | 88 - include/asm-mips/mach-rc32434/integ.h | 59 - include/asm-mips/mach-rc32434/irq.h | 33 - include/asm-mips/mach-rc32434/pci.h | 481 ------ include/asm-mips/mach-rc32434/prom.h | 40 - include/asm-mips/mach-rc32434/rb.h | 84 - include/asm-mips/mach-rc32434/rc32434.h | 19 - include/asm-mips/mach-rc32434/timer.h | 65 - include/asm-mips/mach-rc32434/war.h | 25 - include/asm-mips/mach-rm/cpu-feature-overrides.h | 43 - include/asm-mips/mach-rm/mc146818rtc.h | 21 - include/asm-mips/mach-rm/war.h | 29 - .../asm-mips/mach-sibyte/cpu-feature-overrides.h | 47 - include/asm-mips/mach-sibyte/war.h | 37 - include/asm-mips/mach-tx39xx/ioremap.h | 38 - include/asm-mips/mach-tx39xx/mangle-port.h | 23 - include/asm-mips/mach-tx39xx/war.h | 25 - .../asm-mips/mach-tx49xx/cpu-feature-overrides.h | 23 - include/asm-mips/mach-tx49xx/ioremap.h | 43 - include/asm-mips/mach-tx49xx/kmalloc.h | 8 - include/asm-mips/mach-tx49xx/war.h | 25 - include/asm-mips/mach-vr41xx/irq.h | 8 - include/asm-mips/mach-vr41xx/war.h | 25 - include/asm-mips/mach-wrppmc/mach-gt64120.h | 83 - include/asm-mips/mach-wrppmc/war.h | 25 - .../asm-mips/mach-yosemite/cpu-feature-overrides.h | 47 - include/asm-mips/mach-yosemite/war.h | 25 - include/asm-mips/mc146818-time.h | 119 -- include/asm-mips/mc146818rtc.h | 16 - include/asm-mips/mips-boards/bonito64.h | 436 ----- include/asm-mips/mips-boards/generic.h | 104 -- include/asm-mips/mips-boards/launch.h | 35 - include/asm-mips/mips-boards/malta.h | 102 -- include/asm-mips/mips-boards/maltaint.h | 110 -- include/asm-mips/mips-boards/msc01_pci.h | 258 --- include/asm-mips/mips-boards/piix4.h | 80 - include/asm-mips/mips-boards/prom.h | 47 - include/asm-mips/mips-boards/sim.h | 40 - include/asm-mips/mips-boards/simint.h | 31 - include/asm-mips/mips_mt.h | 26 - include/asm-mips/mipsmtregs.h | 395 ----- include/asm-mips/mipsprom.h | 76 - include/asm-mips/mipsregs.h | 1526 ----------------- include/asm-mips/mman.h | 77 - include/asm-mips/mmu.h | 6 - include/asm-mips/mmu_context.h | 297 ---- include/asm-mips/mmzone.h | 17 - include/asm-mips/module.h | 136 -- include/asm-mips/msc01_ic.h | 148 -- include/asm-mips/msgbuf.h | 47 - include/asm-mips/mutex.h | 9 - include/asm-mips/nile4.h | 310 ---- include/asm-mips/paccess.h | 112 -- include/asm-mips/page.h | 191 --- include/asm-mips/param.h | 31 - include/asm-mips/parport.h | 15 - include/asm-mips/pci.h | 179 -- include/asm-mips/pci/bridge.h | 854 ---------- include/asm-mips/percpu.h | 6 - include/asm-mips/pgalloc.h | 143 -- include/asm-mips/pgtable-32.h | 234 --- include/asm-mips/pgtable-64.h | 253 --- include/asm-mips/pgtable-bits.h | 137 -- include/asm-mips/pgtable.h | 383 ----- include/asm-mips/pmc-sierra/msp71xx/gpio.h | 46 - include/asm-mips/pmc-sierra/msp71xx/msp_cic_int.h | 151 -- include/asm-mips/pmc-sierra/msp71xx/msp_int.h | 43 - include/asm-mips/pmc-sierra/msp71xx/msp_pci.h | 205 --- include/asm-mips/pmc-sierra/msp71xx/msp_prom.h | 176 -- include/asm-mips/pmc-sierra/msp71xx/msp_regops.h | 236 --- include/asm-mips/pmc-sierra/msp71xx/msp_regs.h | 663 -------- include/asm-mips/pmc-sierra/msp71xx/msp_slp_int.h | 141 -- include/asm-mips/pmc-sierra/msp71xx/war.h | 28 - include/asm-mips/pmon.h | 46 - include/asm-mips/poll.h | 9 - include/asm-mips/posix_types.h | 144 -- include/asm-mips/prefetch.h | 87 - include/asm-mips/processor.h | 263 --- include/asm-mips/ptrace.h | 102 -- include/asm-mips/r4k-timer.h | 30 - include/asm-mips/r4kcache.h | 443 ----- include/asm-mips/reboot.h | 15 - include/asm-mips/reg.h | 128 -- include/asm-mips/regdef.h | 100 -- include/asm-mips/resource.h | 35 - include/asm-mips/rm9k-ocd.h | 56 - include/asm-mips/rtlx.h | 65 - include/asm-mips/scatterlist.h | 28 - include/asm-mips/seccomp.h | 37 - include/asm-mips/sections.h | 6 - include/asm-mips/segment.h | 6 - include/asm-mips/sembuf.h | 22 - include/asm-mips/serial.h | 22 - include/asm-mips/setup.h | 10 - include/asm-mips/sgi/gio.h | 86 - include/asm-mips/sgi/hpc3.h | 317 ---- include/asm-mips/sgi/ioc.h | 200 --- include/asm-mips/sgi/ip22.h | 78 - include/asm-mips/sgi/mc.h | 231 --- include/asm-mips/sgi/pi1.h | 71 - include/asm-mips/sgi/seeq.h | 21 - include/asm-mips/sgi/sgi.h | 47 - include/asm-mips/sgi/wd.h | 20 - include/asm-mips/sgialib.h | 124 -- include/asm-mips/sgiarcs.h | 548 ------ include/asm-mips/sgidefs.h | 44 - include/asm-mips/shmbuf.h | 38 - include/asm-mips/shmparam.h | 13 - include/asm-mips/sibyte/bcm1480_int.h | 312 ---- include/asm-mips/sibyte/bcm1480_l2c.h | 176 -- include/asm-mips/sibyte/bcm1480_mc.h | 984 ----------- include/asm-mips/sibyte/bcm1480_regs.h | 902 ---------- include/asm-mips/sibyte/bcm1480_scd.h | 406 ----- include/asm-mips/sibyte/bigsur.h | 49 - include/asm-mips/sibyte/board.h | 68 - include/asm-mips/sibyte/carmel.h | 58 - include/asm-mips/sibyte/sb1250.h | 68 - include/asm-mips/sibyte/sb1250_defs.h | 259 --- include/asm-mips/sibyte/sb1250_dma.h | 594 ------- include/asm-mips/sibyte/sb1250_genbus.h | 474 ------ include/asm-mips/sibyte/sb1250_int.h | 248 --- include/asm-mips/sibyte/sb1250_l2c.h | 131 -- include/asm-mips/sibyte/sb1250_ldt.h | 423 ----- include/asm-mips/sibyte/sb1250_mac.h | 656 -------- include/asm-mips/sibyte/sb1250_mc.h | 550 ------ include/asm-mips/sibyte/sb1250_regs.h | 893 ---------- include/asm-mips/sibyte/sb1250_scd.h | 654 -------- include/asm-mips/sibyte/sb1250_smbus.h | 204 --- include/asm-mips/sibyte/sb1250_syncser.h | 146 -- include/asm-mips/sibyte/sb1250_uart.h | 362 ---- include/asm-mips/sibyte/sentosa.h | 40 - include/asm-mips/sibyte/swarm.h | 64 - include/asm-mips/sigcontext.h | 100 -- include/asm-mips/siginfo.h | 130 -- include/asm-mips/signal.h | 139 -- include/asm-mips/sim.h | 82 - include/asm-mips/smp-ops.h | 57 - include/asm-mips/smp.h | 63 - include/asm-mips/smtc.h | 71 - include/asm-mips/smtc_ipi.h | 128 -- include/asm-mips/smtc_proc.h | 23 - include/asm-mips/smvp.h | 19 - include/asm-mips/sn/addrs.h | 430 ----- include/asm-mips/sn/agent.h | 46 - include/asm-mips/sn/arch.h | 64 - include/asm-mips/sn/fru.h | 44 - include/asm-mips/sn/gda.h | 107 -- include/asm-mips/sn/hub.h | 16 - include/asm-mips/sn/intr.h | 129 -- include/asm-mips/sn/io.h | 59 - include/asm-mips/sn/ioc3.h | 663 -------- include/asm-mips/sn/klconfig.h | 898 ---------- include/asm-mips/sn/kldir.h | 217 --- include/asm-mips/sn/klkernvars.h | 29 - include/asm-mips/sn/launch.h | 106 -- include/asm-mips/sn/mapped_kernel.h | 54 - include/asm-mips/sn/nmi.h | 125 -- include/asm-mips/sn/sn0/addrs.h | 288 ---- include/asm-mips/sn/sn0/arch.h | 72 - include/asm-mips/sn/sn0/hub.h | 40 - include/asm-mips/sn/sn0/hubio.h | 972 ----------- include/asm-mips/sn/sn0/hubmd.h | 789 --------- include/asm-mips/sn/sn0/hubni.h | 255 --- include/asm-mips/sn/sn0/hubpi.h | 409 ----- include/asm-mips/sn/sn0/ip27.h | 85 - include/asm-mips/sn/sn_private.h | 19 - include/asm-mips/sn/types.h | 26 - include/asm-mips/sni.h | 244 --- include/asm-mips/socket.h | 117 -- include/asm-mips/sockios.h | 26 - include/asm-mips/sparsemem.h | 14 - include/asm-mips/spinlock.h | 376 ----- include/asm-mips/spinlock_types.h | 20 - include/asm-mips/stackframe.h | 574 ------- include/asm-mips/stacktrace.h | 48 - include/asm-mips/stat.h | 132 -- include/asm-mips/statfs.h | 96 -- include/asm-mips/string.h | 143 -- include/asm-mips/suspend.h | 6 - include/asm-mips/sysmips.h | 25 - include/asm-mips/system.h | 220 --- include/asm-mips/termbits.h | 226 --- include/asm-mips/termios.h | 132 -- include/asm-mips/thread_info.h | 151 -- include/asm-mips/time.h | 79 - include/asm-mips/timex.h | 43 - include/asm-mips/titan_dep.h | 231 --- include/asm-mips/tlb.h | 23 - include/asm-mips/tlbdebug.h | 16 - include/asm-mips/tlbflush.h | 47 - include/asm-mips/topology.h | 17 - include/asm-mips/traps.h | 28 - include/asm-mips/txx9/boards.h | 13 - include/asm-mips/txx9/generic.h | 89 - include/asm-mips/txx9/jmr3927.h | 180 -- include/asm-mips/txx9/pci.h | 39 - include/asm-mips/txx9/rbtx4927.h | 92 - include/asm-mips/txx9/rbtx4938.h | 145 -- include/asm-mips/txx9/rbtx4939.h | 133 -- include/asm-mips/txx9/smsc_fdc37m81x.h | 68 - include/asm-mips/txx9/spi.h | 34 - include/asm-mips/txx9/tx3927.h | 341 ---- include/asm-mips/txx9/tx4927.h | 269 --- include/asm-mips/txx9/tx4927pcic.h | 203 --- include/asm-mips/txx9/tx4938.h | 295 ---- include/asm-mips/txx9/tx4939.h | 544 ------ include/asm-mips/txx9irq.h | 34 - include/asm-mips/txx9pio.h | 29 - include/asm-mips/txx9tmr.h | 67 - include/asm-mips/types.h | 54 - include/asm-mips/uaccess.h | 852 ---------- include/asm-mips/ucontext.h | 21 - include/asm-mips/unaligned.h | 28 - include/asm-mips/unistd.h | 1037 ------------ include/asm-mips/user.h | 58 - include/asm-mips/vga.h | 47 - include/asm-mips/vpe.h | 37 - include/asm-mips/vr41xx/capcella.h | 43 - include/asm-mips/vr41xx/giu.h | 78 - include/asm-mips/vr41xx/irq.h | 101 -- include/asm-mips/vr41xx/mpc30x.h | 37 - include/asm-mips/vr41xx/pci.h | 90 - include/asm-mips/vr41xx/siu.h | 58 - include/asm-mips/vr41xx/tb0219.h | 42 - include/asm-mips/vr41xx/tb0226.h | 43 - include/asm-mips/vr41xx/tb0287.h | 43 - include/asm-mips/vr41xx/vr41xx.h | 152 -- include/asm-mips/war.h | 244 --- include/asm-mips/wbflush.h | 34 - include/asm-mips/xor.h | 1 - include/asm-mips/xtalk/xtalk.h | 52 - include/asm-mips/xtalk/xwidget.h | 167 -- 925 files changed, 61652 insertions(+), 61652 deletions(-) create mode 100644 arch/mips/include/asm/Kbuild create mode 100644 arch/mips/include/asm/a.out.h create mode 100644 arch/mips/include/asm/abi.h create mode 100644 arch/mips/include/asm/addrspace.h create mode 100644 arch/mips/include/asm/asm.h create mode 100644 arch/mips/include/asm/asmmacro-32.h create mode 100644 arch/mips/include/asm/asmmacro-64.h create mode 100644 arch/mips/include/asm/asmmacro.h create mode 100644 arch/mips/include/asm/atomic.h create mode 100644 arch/mips/include/asm/auxvec.h create mode 100644 arch/mips/include/asm/barrier.h create mode 100644 arch/mips/include/asm/bcache.h create mode 100644 arch/mips/include/asm/bitops.h create mode 100644 arch/mips/include/asm/bootinfo.h create mode 100644 arch/mips/include/asm/branch.h create mode 100644 arch/mips/include/asm/break.h create mode 100644 arch/mips/include/asm/bug.h create mode 100644 arch/mips/include/asm/bugs.h create mode 100644 arch/mips/include/asm/byteorder.h create mode 100644 arch/mips/include/asm/cache.h create mode 100644 arch/mips/include/asm/cachectl.h create mode 100644 arch/mips/include/asm/cacheflush.h create mode 100644 arch/mips/include/asm/cacheops.h create mode 100644 arch/mips/include/asm/checksum.h create mode 100644 arch/mips/include/asm/cmp.h create mode 100644 arch/mips/include/asm/cmpxchg.h create mode 100644 arch/mips/include/asm/compat-signal.h create mode 100644 arch/mips/include/asm/compat.h create mode 100644 arch/mips/include/asm/compiler.h create mode 100644 arch/mips/include/asm/cpu-features.h create mode 100644 arch/mips/include/asm/cpu-info.h create mode 100644 arch/mips/include/asm/cpu.h create mode 100644 arch/mips/include/asm/cputime.h create mode 100644 arch/mips/include/asm/current.h create mode 100644 arch/mips/include/asm/debug.h create mode 100644 arch/mips/include/asm/dec/ecc.h create mode 100644 arch/mips/include/asm/dec/interrupts.h create mode 100644 arch/mips/include/asm/dec/ioasic.h create mode 100644 arch/mips/include/asm/dec/ioasic_addrs.h create mode 100644 arch/mips/include/asm/dec/ioasic_ints.h create mode 100644 arch/mips/include/asm/dec/kn01.h create mode 100644 arch/mips/include/asm/dec/kn02.h create mode 100644 arch/mips/include/asm/dec/kn02ba.h create mode 100644 arch/mips/include/asm/dec/kn02ca.h create mode 100644 arch/mips/include/asm/dec/kn02xa.h create mode 100644 arch/mips/include/asm/dec/kn03.h create mode 100644 arch/mips/include/asm/dec/kn05.h create mode 100644 arch/mips/include/asm/dec/kn230.h create mode 100644 arch/mips/include/asm/dec/machtype.h create mode 100644 arch/mips/include/asm/dec/prom.h create mode 100644 arch/mips/include/asm/dec/system.h create mode 100644 arch/mips/include/asm/delay.h create mode 100644 arch/mips/include/asm/device.h create mode 100644 arch/mips/include/asm/div64.h create mode 100644 arch/mips/include/asm/dma-mapping.h create mode 100644 arch/mips/include/asm/dma.h create mode 100644 arch/mips/include/asm/ds1286.h create mode 100644 arch/mips/include/asm/ds1287.h create mode 100644 arch/mips/include/asm/dsp.h create mode 100644 arch/mips/include/asm/edac.h create mode 100644 arch/mips/include/asm/elf.h create mode 100644 arch/mips/include/asm/emergency-restart.h create mode 100644 arch/mips/include/asm/emma2rh/emma2rh.h create mode 100644 arch/mips/include/asm/emma2rh/markeins.h create mode 100644 arch/mips/include/asm/errno.h create mode 100644 arch/mips/include/asm/fb.h create mode 100644 arch/mips/include/asm/fcntl.h create mode 100644 arch/mips/include/asm/fixmap.h create mode 100644 arch/mips/include/asm/floppy.h create mode 100644 arch/mips/include/asm/fpregdef.h create mode 100644 arch/mips/include/asm/fpu.h create mode 100644 arch/mips/include/asm/fpu_emulator.h create mode 100644 arch/mips/include/asm/futex.h create mode 100644 arch/mips/include/asm/fw/arc/hinv.h create mode 100644 arch/mips/include/asm/fw/arc/types.h create mode 100644 arch/mips/include/asm/fw/cfe/cfe_api.h create mode 100644 arch/mips/include/asm/fw/cfe/cfe_error.h create mode 100644 arch/mips/include/asm/gcmpregs.h create mode 100644 arch/mips/include/asm/gic.h create mode 100644 arch/mips/include/asm/gpio.h create mode 100644 arch/mips/include/asm/gt64120.h create mode 100644 arch/mips/include/asm/hardirq.h create mode 100644 arch/mips/include/asm/hazards.h create mode 100644 arch/mips/include/asm/highmem.h create mode 100644 arch/mips/include/asm/hw_irq.h create mode 100644 arch/mips/include/asm/i8253.h create mode 100644 arch/mips/include/asm/i8259.h create mode 100644 arch/mips/include/asm/ide.h create mode 100644 arch/mips/include/asm/inst.h create mode 100644 arch/mips/include/asm/io.h create mode 100644 arch/mips/include/asm/ioctl.h create mode 100644 arch/mips/include/asm/ioctls.h create mode 100644 arch/mips/include/asm/ip32/crime.h create mode 100644 arch/mips/include/asm/ip32/ip32_ints.h create mode 100644 arch/mips/include/asm/ip32/mace.h create mode 100644 arch/mips/include/asm/ipcbuf.h create mode 100644 arch/mips/include/asm/irq.h create mode 100644 arch/mips/include/asm/irq_cpu.h create mode 100644 arch/mips/include/asm/irq_gt641xx.h create mode 100644 arch/mips/include/asm/irq_regs.h create mode 100644 arch/mips/include/asm/irqflags.h create mode 100644 arch/mips/include/asm/isadep.h create mode 100644 arch/mips/include/asm/jazz.h create mode 100644 arch/mips/include/asm/jazzdma.h create mode 100644 arch/mips/include/asm/kdebug.h create mode 100644 arch/mips/include/asm/kexec.h create mode 100644 arch/mips/include/asm/kgdb.h create mode 100644 arch/mips/include/asm/kmap_types.h create mode 100644 arch/mips/include/asm/kspd.h create mode 100644 arch/mips/include/asm/lasat/ds1603.h create mode 100644 arch/mips/include/asm/lasat/eeprom.h create mode 100644 arch/mips/include/asm/lasat/head.h create mode 100644 arch/mips/include/asm/lasat/lasat.h create mode 100644 arch/mips/include/asm/lasat/lasatint.h create mode 100644 arch/mips/include/asm/lasat/picvue.h create mode 100644 arch/mips/include/asm/lasat/serial.h create mode 100644 arch/mips/include/asm/linkage.h create mode 100644 arch/mips/include/asm/local.h create mode 100644 arch/mips/include/asm/m48t35.h create mode 100644 arch/mips/include/asm/m48t37.h create mode 100644 arch/mips/include/asm/mach-au1x00/au1000.h create mode 100644 arch/mips/include/asm/mach-au1x00/au1000_dma.h create mode 100644 arch/mips/include/asm/mach-au1x00/au1000_gpio.h create mode 100644 arch/mips/include/asm/mach-au1x00/au1100_mmc.h create mode 100644 arch/mips/include/asm/mach-au1x00/au1550_spi.h create mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx.h create mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h create mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx_ide.h create mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx_psc.h create mode 100644 arch/mips/include/asm/mach-au1x00/gpio.h create mode 100644 arch/mips/include/asm/mach-au1x00/ioremap.h create mode 100644 arch/mips/include/asm/mach-au1x00/prom.h create mode 100644 arch/mips/include/asm/mach-au1x00/war.h create mode 100644 arch/mips/include/asm/mach-bcm47xx/bcm47xx.h create mode 100644 arch/mips/include/asm/mach-bcm47xx/gpio.h create mode 100644 arch/mips/include/asm/mach-bcm47xx/war.h create mode 100644 arch/mips/include/asm/mach-cobalt/cobalt.h create mode 100644 arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-cobalt/irq.h create mode 100644 arch/mips/include/asm/mach-cobalt/mach-gt64120.h create mode 100644 arch/mips/include/asm/mach-cobalt/war.h create mode 100644 arch/mips/include/asm/mach-db1x00/db1200.h create mode 100644 arch/mips/include/asm/mach-db1x00/db1x00.h create mode 100644 arch/mips/include/asm/mach-dec/mc146818rtc.h create mode 100644 arch/mips/include/asm/mach-dec/war.h create mode 100644 arch/mips/include/asm/mach-emma2rh/irq.h create mode 100644 arch/mips/include/asm/mach-emma2rh/war.h create mode 100644 arch/mips/include/asm/mach-excite/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-excite/excite.h create mode 100644 arch/mips/include/asm/mach-excite/excite_fpga.h create mode 100644 arch/mips/include/asm/mach-excite/excite_nandflash.h create mode 100644 arch/mips/include/asm/mach-excite/rm9k_eth.h create mode 100644 arch/mips/include/asm/mach-excite/rm9k_wdt.h create mode 100644 arch/mips/include/asm/mach-excite/rm9k_xicap.h create mode 100644 arch/mips/include/asm/mach-excite/war.h create mode 100644 arch/mips/include/asm/mach-generic/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-generic/dma-coherence.h create mode 100644 arch/mips/include/asm/mach-generic/floppy.h create mode 100644 arch/mips/include/asm/mach-generic/gpio.h create mode 100644 arch/mips/include/asm/mach-generic/ide.h create mode 100644 arch/mips/include/asm/mach-generic/ioremap.h create mode 100644 arch/mips/include/asm/mach-generic/irq.h create mode 100644 arch/mips/include/asm/mach-generic/kernel-entry-init.h create mode 100644 arch/mips/include/asm/mach-generic/kmalloc.h create mode 100644 arch/mips/include/asm/mach-generic/mangle-port.h create mode 100644 arch/mips/include/asm/mach-generic/mc146818rtc.h create mode 100644 arch/mips/include/asm/mach-generic/spaces.h create mode 100644 arch/mips/include/asm/mach-generic/topology.h create mode 100644 arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-ip22/ds1286.h create mode 100644 arch/mips/include/asm/mach-ip22/spaces.h create mode 100644 arch/mips/include/asm/mach-ip22/war.h create mode 100644 arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-ip27/dma-coherence.h create mode 100644 arch/mips/include/asm/mach-ip27/irq.h create mode 100644 arch/mips/include/asm/mach-ip27/kernel-entry-init.h create mode 100644 arch/mips/include/asm/mach-ip27/kmalloc.h create mode 100644 arch/mips/include/asm/mach-ip27/mangle-port.h create mode 100644 arch/mips/include/asm/mach-ip27/mmzone.h create mode 100644 arch/mips/include/asm/mach-ip27/spaces.h create mode 100644 arch/mips/include/asm/mach-ip27/topology.h create mode 100644 arch/mips/include/asm/mach-ip27/war.h create mode 100644 arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-ip28/ds1286.h create mode 100644 arch/mips/include/asm/mach-ip28/spaces.h create mode 100644 arch/mips/include/asm/mach-ip28/war.h create mode 100644 arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-ip32/dma-coherence.h create mode 100644 arch/mips/include/asm/mach-ip32/kmalloc.h create mode 100644 arch/mips/include/asm/mach-ip32/mangle-port.h create mode 100644 arch/mips/include/asm/mach-ip32/mc146818rtc.h create mode 100644 arch/mips/include/asm/mach-ip32/war.h create mode 100644 arch/mips/include/asm/mach-jazz/dma-coherence.h create mode 100644 arch/mips/include/asm/mach-jazz/floppy.h create mode 100644 arch/mips/include/asm/mach-jazz/mc146818rtc.h create mode 100644 arch/mips/include/asm/mach-jazz/war.h create mode 100644 arch/mips/include/asm/mach-lasat/irq.h create mode 100644 arch/mips/include/asm/mach-lasat/mach-gt64120.h create mode 100644 arch/mips/include/asm/mach-lasat/war.h create mode 100644 arch/mips/include/asm/mach-lemote/dma-coherence.h create mode 100644 arch/mips/include/asm/mach-lemote/mc146818rtc.h create mode 100644 arch/mips/include/asm/mach-lemote/war.h create mode 100644 arch/mips/include/asm/mach-malta/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-malta/irq.h create mode 100644 arch/mips/include/asm/mach-malta/kernel-entry-init.h create mode 100644 arch/mips/include/asm/mach-malta/mach-gt64120.h create mode 100644 arch/mips/include/asm/mach-malta/mc146818rtc.h create mode 100644 arch/mips/include/asm/mach-malta/war.h create mode 100644 arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-mipssim/war.h create mode 100644 arch/mips/include/asm/mach-pb1x00/mc146818rtc.h create mode 100644 arch/mips/include/asm/mach-pb1x00/pb1000.h create mode 100644 arch/mips/include/asm/mach-pb1x00/pb1100.h create mode 100644 arch/mips/include/asm/mach-pb1x00/pb1200.h create mode 100644 arch/mips/include/asm/mach-pb1x00/pb1500.h create mode 100644 arch/mips/include/asm/mach-pb1x00/pb1550.h create mode 100644 arch/mips/include/asm/mach-pnx8550/cm.h create mode 100644 arch/mips/include/asm/mach-pnx8550/glb.h create mode 100644 arch/mips/include/asm/mach-pnx8550/int.h create mode 100644 arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h create mode 100644 arch/mips/include/asm/mach-pnx8550/nand.h create mode 100644 arch/mips/include/asm/mach-pnx8550/pci.h create mode 100644 arch/mips/include/asm/mach-pnx8550/uart.h create mode 100644 arch/mips/include/asm/mach-pnx8550/usb.h create mode 100644 arch/mips/include/asm/mach-pnx8550/war.h create mode 100644 arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-rc32434/ddr.h create mode 100644 arch/mips/include/asm/mach-rc32434/dma.h create mode 100644 arch/mips/include/asm/mach-rc32434/dma_v.h create mode 100644 arch/mips/include/asm/mach-rc32434/eth.h create mode 100644 arch/mips/include/asm/mach-rc32434/gpio.h create mode 100644 arch/mips/include/asm/mach-rc32434/integ.h create mode 100644 arch/mips/include/asm/mach-rc32434/irq.h create mode 100644 arch/mips/include/asm/mach-rc32434/pci.h create mode 100644 arch/mips/include/asm/mach-rc32434/prom.h create mode 100644 arch/mips/include/asm/mach-rc32434/rb.h create mode 100644 arch/mips/include/asm/mach-rc32434/rc32434.h create mode 100644 arch/mips/include/asm/mach-rc32434/timer.h create mode 100644 arch/mips/include/asm/mach-rc32434/war.h create mode 100644 arch/mips/include/asm/mach-rm/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-rm/mc146818rtc.h create mode 100644 arch/mips/include/asm/mach-rm/war.h create mode 100644 arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-sibyte/war.h create mode 100644 arch/mips/include/asm/mach-tx39xx/ioremap.h create mode 100644 arch/mips/include/asm/mach-tx39xx/mangle-port.h create mode 100644 arch/mips/include/asm/mach-tx39xx/war.h create mode 100644 arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-tx49xx/ioremap.h create mode 100644 arch/mips/include/asm/mach-tx49xx/kmalloc.h create mode 100644 arch/mips/include/asm/mach-tx49xx/war.h create mode 100644 arch/mips/include/asm/mach-vr41xx/irq.h create mode 100644 arch/mips/include/asm/mach-vr41xx/war.h create mode 100644 arch/mips/include/asm/mach-wrppmc/mach-gt64120.h create mode 100644 arch/mips/include/asm/mach-wrppmc/war.h create mode 100644 arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-yosemite/war.h create mode 100644 arch/mips/include/asm/mc146818-time.h create mode 100644 arch/mips/include/asm/mc146818rtc.h create mode 100644 arch/mips/include/asm/mips-boards/bonito64.h create mode 100644 arch/mips/include/asm/mips-boards/generic.h create mode 100644 arch/mips/include/asm/mips-boards/launch.h create mode 100644 arch/mips/include/asm/mips-boards/malta.h create mode 100644 arch/mips/include/asm/mips-boards/maltaint.h create mode 100644 arch/mips/include/asm/mips-boards/msc01_pci.h create mode 100644 arch/mips/include/asm/mips-boards/piix4.h create mode 100644 arch/mips/include/asm/mips-boards/prom.h create mode 100644 arch/mips/include/asm/mips-boards/sim.h create mode 100644 arch/mips/include/asm/mips-boards/simint.h create mode 100644 arch/mips/include/asm/mips_mt.h create mode 100644 arch/mips/include/asm/mipsmtregs.h create mode 100644 arch/mips/include/asm/mipsprom.h create mode 100644 arch/mips/include/asm/mipsregs.h create mode 100644 arch/mips/include/asm/mman.h create mode 100644 arch/mips/include/asm/mmu.h create mode 100644 arch/mips/include/asm/mmu_context.h create mode 100644 arch/mips/include/asm/mmzone.h create mode 100644 arch/mips/include/asm/module.h create mode 100644 arch/mips/include/asm/msc01_ic.h create mode 100644 arch/mips/include/asm/msgbuf.h create mode 100644 arch/mips/include/asm/mutex.h create mode 100644 arch/mips/include/asm/nile4.h create mode 100644 arch/mips/include/asm/paccess.h create mode 100644 arch/mips/include/asm/page.h create mode 100644 arch/mips/include/asm/param.h create mode 100644 arch/mips/include/asm/parport.h create mode 100644 arch/mips/include/asm/pci.h create mode 100644 arch/mips/include/asm/pci/bridge.h create mode 100644 arch/mips/include/asm/percpu.h create mode 100644 arch/mips/include/asm/pgalloc.h create mode 100644 arch/mips/include/asm/pgtable-32.h create mode 100644 arch/mips/include/asm/pgtable-64.h create mode 100644 arch/mips/include/asm/pgtable-bits.h create mode 100644 arch/mips/include/asm/pgtable.h create mode 100644 arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h create mode 100644 arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h create mode 100644 arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h create mode 100644 arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h create mode 100644 arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h create mode 100644 arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h create mode 100644 arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h create mode 100644 arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h create mode 100644 arch/mips/include/asm/pmc-sierra/msp71xx/war.h create mode 100644 arch/mips/include/asm/pmon.h create mode 100644 arch/mips/include/asm/poll.h create mode 100644 arch/mips/include/asm/posix_types.h create mode 100644 arch/mips/include/asm/prefetch.h create mode 100644 arch/mips/include/asm/processor.h create mode 100644 arch/mips/include/asm/ptrace.h create mode 100644 arch/mips/include/asm/r4k-timer.h create mode 100644 arch/mips/include/asm/r4kcache.h create mode 100644 arch/mips/include/asm/reboot.h create mode 100644 arch/mips/include/asm/reg.h create mode 100644 arch/mips/include/asm/regdef.h create mode 100644 arch/mips/include/asm/resource.h create mode 100644 arch/mips/include/asm/rm9k-ocd.h create mode 100644 arch/mips/include/asm/rtlx.h create mode 100644 arch/mips/include/asm/scatterlist.h create mode 100644 arch/mips/include/asm/seccomp.h create mode 100644 arch/mips/include/asm/sections.h create mode 100644 arch/mips/include/asm/segment.h create mode 100644 arch/mips/include/asm/sembuf.h create mode 100644 arch/mips/include/asm/serial.h create mode 100644 arch/mips/include/asm/setup.h create mode 100644 arch/mips/include/asm/sgi/gio.h create mode 100644 arch/mips/include/asm/sgi/hpc3.h create mode 100644 arch/mips/include/asm/sgi/ioc.h create mode 100644 arch/mips/include/asm/sgi/ip22.h create mode 100644 arch/mips/include/asm/sgi/mc.h create mode 100644 arch/mips/include/asm/sgi/pi1.h create mode 100644 arch/mips/include/asm/sgi/seeq.h create mode 100644 arch/mips/include/asm/sgi/sgi.h create mode 100644 arch/mips/include/asm/sgi/wd.h create mode 100644 arch/mips/include/asm/sgialib.h create mode 100644 arch/mips/include/asm/sgiarcs.h create mode 100644 arch/mips/include/asm/sgidefs.h create mode 100644 arch/mips/include/asm/shmbuf.h create mode 100644 arch/mips/include/asm/shmparam.h create mode 100644 arch/mips/include/asm/sibyte/bcm1480_int.h create mode 100644 arch/mips/include/asm/sibyte/bcm1480_l2c.h create mode 100644 arch/mips/include/asm/sibyte/bcm1480_mc.h create mode 100644 arch/mips/include/asm/sibyte/bcm1480_regs.h create mode 100644 arch/mips/include/asm/sibyte/bcm1480_scd.h create mode 100644 arch/mips/include/asm/sibyte/bigsur.h create mode 100644 arch/mips/include/asm/sibyte/board.h create mode 100644 arch/mips/include/asm/sibyte/carmel.h create mode 100644 arch/mips/include/asm/sibyte/sb1250.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_defs.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_dma.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_genbus.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_int.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_l2c.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_ldt.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_mac.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_mc.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_regs.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_scd.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_smbus.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_syncser.h create mode 100644 arch/mips/include/asm/sibyte/sb1250_uart.h create mode 100644 arch/mips/include/asm/sibyte/sentosa.h create mode 100644 arch/mips/include/asm/sibyte/swarm.h create mode 100644 arch/mips/include/asm/sigcontext.h create mode 100644 arch/mips/include/asm/siginfo.h create mode 100644 arch/mips/include/asm/signal.h create mode 100644 arch/mips/include/asm/sim.h create mode 100644 arch/mips/include/asm/smp-ops.h create mode 100644 arch/mips/include/asm/smp.h create mode 100644 arch/mips/include/asm/smtc.h create mode 100644 arch/mips/include/asm/smtc_ipi.h create mode 100644 arch/mips/include/asm/smtc_proc.h create mode 100644 arch/mips/include/asm/smvp.h create mode 100644 arch/mips/include/asm/sn/addrs.h create mode 100644 arch/mips/include/asm/sn/agent.h create mode 100644 arch/mips/include/asm/sn/arch.h create mode 100644 arch/mips/include/asm/sn/fru.h create mode 100644 arch/mips/include/asm/sn/gda.h create mode 100644 arch/mips/include/asm/sn/hub.h create mode 100644 arch/mips/include/asm/sn/intr.h create mode 100644 arch/mips/include/asm/sn/io.h create mode 100644 arch/mips/include/asm/sn/ioc3.h create mode 100644 arch/mips/include/asm/sn/klconfig.h create mode 100644 arch/mips/include/asm/sn/kldir.h create mode 100644 arch/mips/include/asm/sn/klkernvars.h create mode 100644 arch/mips/include/asm/sn/launch.h create mode 100644 arch/mips/include/asm/sn/mapped_kernel.h create mode 100644 arch/mips/include/asm/sn/nmi.h create mode 100644 arch/mips/include/asm/sn/sn0/addrs.h create mode 100644 arch/mips/include/asm/sn/sn0/arch.h create mode 100644 arch/mips/include/asm/sn/sn0/hub.h create mode 100644 arch/mips/include/asm/sn/sn0/hubio.h create mode 100644 arch/mips/include/asm/sn/sn0/hubmd.h create mode 100644 arch/mips/include/asm/sn/sn0/hubni.h create mode 100644 arch/mips/include/asm/sn/sn0/hubpi.h create mode 100644 arch/mips/include/asm/sn/sn0/ip27.h create mode 100644 arch/mips/include/asm/sn/sn_private.h create mode 100644 arch/mips/include/asm/sn/types.h create mode 100644 arch/mips/include/asm/sni.h create mode 100644 arch/mips/include/asm/socket.h create mode 100644 arch/mips/include/asm/sockios.h create mode 100644 arch/mips/include/asm/sparsemem.h create mode 100644 arch/mips/include/asm/spinlock.h create mode 100644 arch/mips/include/asm/spinlock_types.h create mode 100644 arch/mips/include/asm/stackframe.h create mode 100644 arch/mips/include/asm/stacktrace.h create mode 100644 arch/mips/include/asm/stat.h create mode 100644 arch/mips/include/asm/statfs.h create mode 100644 arch/mips/include/asm/string.h create mode 100644 arch/mips/include/asm/suspend.h create mode 100644 arch/mips/include/asm/sysmips.h create mode 100644 arch/mips/include/asm/system.h create mode 100644 arch/mips/include/asm/termbits.h create mode 100644 arch/mips/include/asm/termios.h create mode 100644 arch/mips/include/asm/thread_info.h create mode 100644 arch/mips/include/asm/time.h create mode 100644 arch/mips/include/asm/timex.h create mode 100644 arch/mips/include/asm/titan_dep.h create mode 100644 arch/mips/include/asm/tlb.h create mode 100644 arch/mips/include/asm/tlbdebug.h create mode 100644 arch/mips/include/asm/tlbflush.h create mode 100644 arch/mips/include/asm/topology.h create mode 100644 arch/mips/include/asm/traps.h create mode 100644 arch/mips/include/asm/txx9/boards.h create mode 100644 arch/mips/include/asm/txx9/generic.h create mode 100644 arch/mips/include/asm/txx9/jmr3927.h create mode 100644 arch/mips/include/asm/txx9/pci.h create mode 100644 arch/mips/include/asm/txx9/rbtx4927.h create mode 100644 arch/mips/include/asm/txx9/rbtx4938.h create mode 100644 arch/mips/include/asm/txx9/rbtx4939.h create mode 100644 arch/mips/include/asm/txx9/smsc_fdc37m81x.h create mode 100644 arch/mips/include/asm/txx9/spi.h create mode 100644 arch/mips/include/asm/txx9/tx3927.h create mode 100644 arch/mips/include/asm/txx9/tx4927.h create mode 100644 arch/mips/include/asm/txx9/tx4927pcic.h create mode 100644 arch/mips/include/asm/txx9/tx4938.h create mode 100644 arch/mips/include/asm/txx9/tx4939.h create mode 100644 arch/mips/include/asm/txx9irq.h create mode 100644 arch/mips/include/asm/txx9pio.h create mode 100644 arch/mips/include/asm/txx9tmr.h create mode 100644 arch/mips/include/asm/types.h create mode 100644 arch/mips/include/asm/uaccess.h create mode 100644 arch/mips/include/asm/ucontext.h create mode 100644 arch/mips/include/asm/unaligned.h create mode 100644 arch/mips/include/asm/unistd.h create mode 100644 arch/mips/include/asm/user.h create mode 100644 arch/mips/include/asm/vga.h create mode 100644 arch/mips/include/asm/vpe.h create mode 100644 arch/mips/include/asm/vr41xx/capcella.h create mode 100644 arch/mips/include/asm/vr41xx/giu.h create mode 100644 arch/mips/include/asm/vr41xx/irq.h create mode 100644 arch/mips/include/asm/vr41xx/mpc30x.h create mode 100644 arch/mips/include/asm/vr41xx/pci.h create mode 100644 arch/mips/include/asm/vr41xx/siu.h create mode 100644 arch/mips/include/asm/vr41xx/tb0219.h create mode 100644 arch/mips/include/asm/vr41xx/tb0226.h create mode 100644 arch/mips/include/asm/vr41xx/tb0287.h create mode 100644 arch/mips/include/asm/vr41xx/vr41xx.h create mode 100644 arch/mips/include/asm/war.h create mode 100644 arch/mips/include/asm/wbflush.h create mode 100644 arch/mips/include/asm/xor.h create mode 100644 arch/mips/include/asm/xtalk/xtalk.h create mode 100644 arch/mips/include/asm/xtalk/xwidget.h delete mode 100644 include/asm-mips/Kbuild delete mode 100644 include/asm-mips/a.out.h delete mode 100644 include/asm-mips/abi.h delete mode 100644 include/asm-mips/addrspace.h delete mode 100644 include/asm-mips/asm.h delete mode 100644 include/asm-mips/asmmacro-32.h delete mode 100644 include/asm-mips/asmmacro-64.h delete mode 100644 include/asm-mips/asmmacro.h delete mode 100644 include/asm-mips/atomic.h delete mode 100644 include/asm-mips/auxvec.h delete mode 100644 include/asm-mips/barrier.h delete mode 100644 include/asm-mips/bcache.h delete mode 100644 include/asm-mips/bitops.h delete mode 100644 include/asm-mips/bootinfo.h delete mode 100644 include/asm-mips/branch.h delete mode 100644 include/asm-mips/break.h delete mode 100644 include/asm-mips/bug.h delete mode 100644 include/asm-mips/bugs.h delete mode 100644 include/asm-mips/byteorder.h delete mode 100644 include/asm-mips/cache.h delete mode 100644 include/asm-mips/cachectl.h delete mode 100644 include/asm-mips/cacheflush.h delete mode 100644 include/asm-mips/cacheops.h delete mode 100644 include/asm-mips/checksum.h delete mode 100644 include/asm-mips/cmp.h delete mode 100644 include/asm-mips/cmpxchg.h delete mode 100644 include/asm-mips/compat-signal.h delete mode 100644 include/asm-mips/compat.h delete mode 100644 include/asm-mips/compiler.h delete mode 100644 include/asm-mips/cpu-features.h delete mode 100644 include/asm-mips/cpu-info.h delete mode 100644 include/asm-mips/cpu.h delete mode 100644 include/asm-mips/cputime.h delete mode 100644 include/asm-mips/current.h delete mode 100644 include/asm-mips/debug.h delete mode 100644 include/asm-mips/dec/ecc.h delete mode 100644 include/asm-mips/dec/interrupts.h delete mode 100644 include/asm-mips/dec/ioasic.h delete mode 100644 include/asm-mips/dec/ioasic_addrs.h delete mode 100644 include/asm-mips/dec/ioasic_ints.h delete mode 100644 include/asm-mips/dec/kn01.h delete mode 100644 include/asm-mips/dec/kn02.h delete mode 100644 include/asm-mips/dec/kn02ba.h delete mode 100644 include/asm-mips/dec/kn02ca.h delete mode 100644 include/asm-mips/dec/kn02xa.h delete mode 100644 include/asm-mips/dec/kn03.h delete mode 100644 include/asm-mips/dec/kn05.h delete mode 100644 include/asm-mips/dec/kn230.h delete mode 100644 include/asm-mips/dec/machtype.h delete mode 100644 include/asm-mips/dec/prom.h delete mode 100644 include/asm-mips/dec/system.h delete mode 100644 include/asm-mips/delay.h delete mode 100644 include/asm-mips/device.h delete mode 100644 include/asm-mips/div64.h delete mode 100644 include/asm-mips/dma-mapping.h delete mode 100644 include/asm-mips/dma.h delete mode 100644 include/asm-mips/ds1286.h delete mode 100644 include/asm-mips/ds1287.h delete mode 100644 include/asm-mips/dsp.h delete mode 100644 include/asm-mips/edac.h delete mode 100644 include/asm-mips/elf.h delete mode 100644 include/asm-mips/emergency-restart.h delete mode 100644 include/asm-mips/emma2rh/emma2rh.h delete mode 100644 include/asm-mips/emma2rh/markeins.h delete mode 100644 include/asm-mips/errno.h delete mode 100644 include/asm-mips/fb.h delete mode 100644 include/asm-mips/fcntl.h delete mode 100644 include/asm-mips/fixmap.h delete mode 100644 include/asm-mips/floppy.h delete mode 100644 include/asm-mips/fpregdef.h delete mode 100644 include/asm-mips/fpu.h delete mode 100644 include/asm-mips/fpu_emulator.h delete mode 100644 include/asm-mips/futex.h delete mode 100644 include/asm-mips/fw/arc/hinv.h delete mode 100644 include/asm-mips/fw/arc/types.h delete mode 100644 include/asm-mips/fw/cfe/cfe_api.h delete mode 100644 include/asm-mips/fw/cfe/cfe_error.h delete mode 100644 include/asm-mips/gcmpregs.h delete mode 100644 include/asm-mips/gic.h delete mode 100644 include/asm-mips/gpio.h delete mode 100644 include/asm-mips/gt64120.h delete mode 100644 include/asm-mips/hardirq.h delete mode 100644 include/asm-mips/hazards.h delete mode 100644 include/asm-mips/highmem.h delete mode 100644 include/asm-mips/hw_irq.h delete mode 100644 include/asm-mips/i8253.h delete mode 100644 include/asm-mips/i8259.h delete mode 100644 include/asm-mips/ide.h delete mode 100644 include/asm-mips/inst.h delete mode 100644 include/asm-mips/io.h delete mode 100644 include/asm-mips/ioctl.h delete mode 100644 include/asm-mips/ioctls.h delete mode 100644 include/asm-mips/ip32/crime.h delete mode 100644 include/asm-mips/ip32/ip32_ints.h delete mode 100644 include/asm-mips/ip32/mace.h delete mode 100644 include/asm-mips/ipcbuf.h delete mode 100644 include/asm-mips/irq.h delete mode 100644 include/asm-mips/irq_cpu.h delete mode 100644 include/asm-mips/irq_gt641xx.h delete mode 100644 include/asm-mips/irq_regs.h delete mode 100644 include/asm-mips/irqflags.h delete mode 100644 include/asm-mips/isadep.h delete mode 100644 include/asm-mips/jazz.h delete mode 100644 include/asm-mips/jazzdma.h delete mode 100644 include/asm-mips/kdebug.h delete mode 100644 include/asm-mips/kexec.h delete mode 100644 include/asm-mips/kgdb.h delete mode 100644 include/asm-mips/kmap_types.h delete mode 100644 include/asm-mips/kspd.h delete mode 100644 include/asm-mips/lasat/ds1603.h delete mode 100644 include/asm-mips/lasat/eeprom.h delete mode 100644 include/asm-mips/lasat/head.h delete mode 100644 include/asm-mips/lasat/lasat.h delete mode 100644 include/asm-mips/lasat/lasatint.h delete mode 100644 include/asm-mips/lasat/picvue.h delete mode 100644 include/asm-mips/lasat/serial.h delete mode 100644 include/asm-mips/linkage.h delete mode 100644 include/asm-mips/local.h delete mode 100644 include/asm-mips/m48t35.h delete mode 100644 include/asm-mips/m48t37.h delete mode 100644 include/asm-mips/mach-au1x00/au1000.h delete mode 100644 include/asm-mips/mach-au1x00/au1000_dma.h delete mode 100644 include/asm-mips/mach-au1x00/au1000_gpio.h delete mode 100644 include/asm-mips/mach-au1x00/au1100_mmc.h delete mode 100644 include/asm-mips/mach-au1x00/au1550_spi.h delete mode 100644 include/asm-mips/mach-au1x00/au1xxx.h delete mode 100644 include/asm-mips/mach-au1x00/au1xxx_dbdma.h delete mode 100644 include/asm-mips/mach-au1x00/au1xxx_ide.h delete mode 100644 include/asm-mips/mach-au1x00/au1xxx_psc.h delete mode 100644 include/asm-mips/mach-au1x00/gpio.h delete mode 100644 include/asm-mips/mach-au1x00/ioremap.h delete mode 100644 include/asm-mips/mach-au1x00/prom.h delete mode 100644 include/asm-mips/mach-au1x00/war.h delete mode 100644 include/asm-mips/mach-bcm47xx/bcm47xx.h delete mode 100644 include/asm-mips/mach-bcm47xx/gpio.h delete mode 100644 include/asm-mips/mach-bcm47xx/war.h delete mode 100644 include/asm-mips/mach-cobalt/cobalt.h delete mode 100644 include/asm-mips/mach-cobalt/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-cobalt/irq.h delete mode 100644 include/asm-mips/mach-cobalt/mach-gt64120.h delete mode 100644 include/asm-mips/mach-cobalt/war.h delete mode 100644 include/asm-mips/mach-db1x00/db1200.h delete mode 100644 include/asm-mips/mach-db1x00/db1x00.h delete mode 100644 include/asm-mips/mach-dec/mc146818rtc.h delete mode 100644 include/asm-mips/mach-dec/war.h delete mode 100644 include/asm-mips/mach-emma2rh/irq.h delete mode 100644 include/asm-mips/mach-emma2rh/war.h delete mode 100644 include/asm-mips/mach-excite/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-excite/excite.h delete mode 100644 include/asm-mips/mach-excite/excite_fpga.h delete mode 100644 include/asm-mips/mach-excite/excite_nandflash.h delete mode 100644 include/asm-mips/mach-excite/rm9k_eth.h delete mode 100644 include/asm-mips/mach-excite/rm9k_wdt.h delete mode 100644 include/asm-mips/mach-excite/rm9k_xicap.h delete mode 100644 include/asm-mips/mach-excite/war.h delete mode 100644 include/asm-mips/mach-generic/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-generic/dma-coherence.h delete mode 100644 include/asm-mips/mach-generic/floppy.h delete mode 100644 include/asm-mips/mach-generic/gpio.h delete mode 100644 include/asm-mips/mach-generic/ide.h delete mode 100644 include/asm-mips/mach-generic/ioremap.h delete mode 100644 include/asm-mips/mach-generic/irq.h delete mode 100644 include/asm-mips/mach-generic/kernel-entry-init.h delete mode 100644 include/asm-mips/mach-generic/kmalloc.h delete mode 100644 include/asm-mips/mach-generic/mangle-port.h delete mode 100644 include/asm-mips/mach-generic/mc146818rtc.h delete mode 100644 include/asm-mips/mach-generic/spaces.h delete mode 100644 include/asm-mips/mach-generic/topology.h delete mode 100644 include/asm-mips/mach-ip22/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-ip22/ds1286.h delete mode 100644 include/asm-mips/mach-ip22/spaces.h delete mode 100644 include/asm-mips/mach-ip22/war.h delete mode 100644 include/asm-mips/mach-ip27/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-ip27/dma-coherence.h delete mode 100644 include/asm-mips/mach-ip27/irq.h delete mode 100644 include/asm-mips/mach-ip27/kernel-entry-init.h delete mode 100644 include/asm-mips/mach-ip27/kmalloc.h delete mode 100644 include/asm-mips/mach-ip27/mangle-port.h delete mode 100644 include/asm-mips/mach-ip27/mmzone.h delete mode 100644 include/asm-mips/mach-ip27/spaces.h delete mode 100644 include/asm-mips/mach-ip27/topology.h delete mode 100644 include/asm-mips/mach-ip27/war.h delete mode 100644 include/asm-mips/mach-ip28/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-ip28/ds1286.h delete mode 100644 include/asm-mips/mach-ip28/spaces.h delete mode 100644 include/asm-mips/mach-ip28/war.h delete mode 100644 include/asm-mips/mach-ip32/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-ip32/dma-coherence.h delete mode 100644 include/asm-mips/mach-ip32/kmalloc.h delete mode 100644 include/asm-mips/mach-ip32/mangle-port.h delete mode 100644 include/asm-mips/mach-ip32/mc146818rtc.h delete mode 100644 include/asm-mips/mach-ip32/war.h delete mode 100644 include/asm-mips/mach-jazz/dma-coherence.h delete mode 100644 include/asm-mips/mach-jazz/floppy.h delete mode 100644 include/asm-mips/mach-jazz/mc146818rtc.h delete mode 100644 include/asm-mips/mach-jazz/war.h delete mode 100644 include/asm-mips/mach-lasat/irq.h delete mode 100644 include/asm-mips/mach-lasat/mach-gt64120.h delete mode 100644 include/asm-mips/mach-lasat/war.h delete mode 100644 include/asm-mips/mach-lemote/dma-coherence.h delete mode 100644 include/asm-mips/mach-lemote/mc146818rtc.h delete mode 100644 include/asm-mips/mach-lemote/war.h delete mode 100644 include/asm-mips/mach-malta/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-malta/irq.h delete mode 100644 include/asm-mips/mach-malta/kernel-entry-init.h delete mode 100644 include/asm-mips/mach-malta/mach-gt64120.h delete mode 100644 include/asm-mips/mach-malta/mc146818rtc.h delete mode 100644 include/asm-mips/mach-malta/war.h delete mode 100644 include/asm-mips/mach-mipssim/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-mipssim/war.h delete mode 100644 include/asm-mips/mach-pb1x00/mc146818rtc.h delete mode 100644 include/asm-mips/mach-pb1x00/pb1000.h delete mode 100644 include/asm-mips/mach-pb1x00/pb1100.h delete mode 100644 include/asm-mips/mach-pb1x00/pb1200.h delete mode 100644 include/asm-mips/mach-pb1x00/pb1500.h delete mode 100644 include/asm-mips/mach-pb1x00/pb1550.h delete mode 100644 include/asm-mips/mach-pnx8550/cm.h delete mode 100644 include/asm-mips/mach-pnx8550/glb.h delete mode 100644 include/asm-mips/mach-pnx8550/int.h delete mode 100644 include/asm-mips/mach-pnx8550/kernel-entry-init.h delete mode 100644 include/asm-mips/mach-pnx8550/nand.h delete mode 100644 include/asm-mips/mach-pnx8550/pci.h delete mode 100644 include/asm-mips/mach-pnx8550/uart.h delete mode 100644 include/asm-mips/mach-pnx8550/usb.h delete mode 100644 include/asm-mips/mach-pnx8550/war.h delete mode 100644 include/asm-mips/mach-rc32434/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-rc32434/ddr.h delete mode 100644 include/asm-mips/mach-rc32434/dma.h delete mode 100644 include/asm-mips/mach-rc32434/dma_v.h delete mode 100644 include/asm-mips/mach-rc32434/eth.h delete mode 100644 include/asm-mips/mach-rc32434/gpio.h delete mode 100644 include/asm-mips/mach-rc32434/integ.h delete mode 100644 include/asm-mips/mach-rc32434/irq.h delete mode 100644 include/asm-mips/mach-rc32434/pci.h delete mode 100644 include/asm-mips/mach-rc32434/prom.h delete mode 100644 include/asm-mips/mach-rc32434/rb.h delete mode 100644 include/asm-mips/mach-rc32434/rc32434.h delete mode 100644 include/asm-mips/mach-rc32434/timer.h delete mode 100644 include/asm-mips/mach-rc32434/war.h delete mode 100644 include/asm-mips/mach-rm/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-rm/mc146818rtc.h delete mode 100644 include/asm-mips/mach-rm/war.h delete mode 100644 include/asm-mips/mach-sibyte/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-sibyte/war.h delete mode 100644 include/asm-mips/mach-tx39xx/ioremap.h delete mode 100644 include/asm-mips/mach-tx39xx/mangle-port.h delete mode 100644 include/asm-mips/mach-tx39xx/war.h delete mode 100644 include/asm-mips/mach-tx49xx/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-tx49xx/ioremap.h delete mode 100644 include/asm-mips/mach-tx49xx/kmalloc.h delete mode 100644 include/asm-mips/mach-tx49xx/war.h delete mode 100644 include/asm-mips/mach-vr41xx/irq.h delete mode 100644 include/asm-mips/mach-vr41xx/war.h delete mode 100644 include/asm-mips/mach-wrppmc/mach-gt64120.h delete mode 100644 include/asm-mips/mach-wrppmc/war.h delete mode 100644 include/asm-mips/mach-yosemite/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-yosemite/war.h delete mode 100644 include/asm-mips/mc146818-time.h delete mode 100644 include/asm-mips/mc146818rtc.h delete mode 100644 include/asm-mips/mips-boards/bonito64.h delete mode 100644 include/asm-mips/mips-boards/generic.h delete mode 100644 include/asm-mips/mips-boards/launch.h delete mode 100644 include/asm-mips/mips-boards/malta.h delete mode 100644 include/asm-mips/mips-boards/maltaint.h delete mode 100644 include/asm-mips/mips-boards/msc01_pci.h delete mode 100644 include/asm-mips/mips-boards/piix4.h delete mode 100644 include/asm-mips/mips-boards/prom.h delete mode 100644 include/asm-mips/mips-boards/sim.h delete mode 100644 include/asm-mips/mips-boards/simint.h delete mode 100644 include/asm-mips/mips_mt.h delete mode 100644 include/asm-mips/mipsmtregs.h delete mode 100644 include/asm-mips/mipsprom.h delete mode 100644 include/asm-mips/mipsregs.h delete mode 100644 include/asm-mips/mman.h delete mode 100644 include/asm-mips/mmu.h delete mode 100644 include/asm-mips/mmu_context.h delete mode 100644 include/asm-mips/mmzone.h delete mode 100644 include/asm-mips/module.h delete mode 100644 include/asm-mips/msc01_ic.h delete mode 100644 include/asm-mips/msgbuf.h delete mode 100644 include/asm-mips/mutex.h delete mode 100644 include/asm-mips/nile4.h delete mode 100644 include/asm-mips/paccess.h delete mode 100644 include/asm-mips/page.h delete mode 100644 include/asm-mips/param.h delete mode 100644 include/asm-mips/parport.h delete mode 100644 include/asm-mips/pci.h delete mode 100644 include/asm-mips/pci/bridge.h delete mode 100644 include/asm-mips/percpu.h delete mode 100644 include/asm-mips/pgalloc.h delete mode 100644 include/asm-mips/pgtable-32.h delete mode 100644 include/asm-mips/pgtable-64.h delete mode 100644 include/asm-mips/pgtable-bits.h delete mode 100644 include/asm-mips/pgtable.h delete mode 100644 include/asm-mips/pmc-sierra/msp71xx/gpio.h delete mode 100644 include/asm-mips/pmc-sierra/msp71xx/msp_cic_int.h delete mode 100644 include/asm-mips/pmc-sierra/msp71xx/msp_int.h delete mode 100644 include/asm-mips/pmc-sierra/msp71xx/msp_pci.h delete mode 100644 include/asm-mips/pmc-sierra/msp71xx/msp_prom.h delete mode 100644 include/asm-mips/pmc-sierra/msp71xx/msp_regops.h delete mode 100644 include/asm-mips/pmc-sierra/msp71xx/msp_regs.h delete mode 100644 include/asm-mips/pmc-sierra/msp71xx/msp_slp_int.h delete mode 100644 include/asm-mips/pmc-sierra/msp71xx/war.h delete mode 100644 include/asm-mips/pmon.h delete mode 100644 include/asm-mips/poll.h delete mode 100644 include/asm-mips/posix_types.h delete mode 100644 include/asm-mips/prefetch.h delete mode 100644 include/asm-mips/processor.h delete mode 100644 include/asm-mips/ptrace.h delete mode 100644 include/asm-mips/r4k-timer.h delete mode 100644 include/asm-mips/r4kcache.h delete mode 100644 include/asm-mips/reboot.h delete mode 100644 include/asm-mips/reg.h delete mode 100644 include/asm-mips/regdef.h delete mode 100644 include/asm-mips/resource.h delete mode 100644 include/asm-mips/rm9k-ocd.h delete mode 100644 include/asm-mips/rtlx.h delete mode 100644 include/asm-mips/scatterlist.h delete mode 100644 include/asm-mips/seccomp.h delete mode 100644 include/asm-mips/sections.h delete mode 100644 include/asm-mips/segment.h delete mode 100644 include/asm-mips/sembuf.h delete mode 100644 include/asm-mips/serial.h delete mode 100644 include/asm-mips/setup.h delete mode 100644 include/asm-mips/sgi/gio.h delete mode 100644 include/asm-mips/sgi/hpc3.h delete mode 100644 include/asm-mips/sgi/ioc.h delete mode 100644 include/asm-mips/sgi/ip22.h delete mode 100644 include/asm-mips/sgi/mc.h delete mode 100644 include/asm-mips/sgi/pi1.h delete mode 100644 include/asm-mips/sgi/seeq.h delete mode 100644 include/asm-mips/sgi/sgi.h delete mode 100644 include/asm-mips/sgi/wd.h delete mode 100644 include/asm-mips/sgialib.h delete mode 100644 include/asm-mips/sgiarcs.h delete mode 100644 include/asm-mips/sgidefs.h delete mode 100644 include/asm-mips/shmbuf.h delete mode 100644 include/asm-mips/shmparam.h delete mode 100644 include/asm-mips/sibyte/bcm1480_int.h delete mode 100644 include/asm-mips/sibyte/bcm1480_l2c.h delete mode 100644 include/asm-mips/sibyte/bcm1480_mc.h delete mode 100644 include/asm-mips/sibyte/bcm1480_regs.h delete mode 100644 include/asm-mips/sibyte/bcm1480_scd.h delete mode 100644 include/asm-mips/sibyte/bigsur.h delete mode 100644 include/asm-mips/sibyte/board.h delete mode 100644 include/asm-mips/sibyte/carmel.h delete mode 100644 include/asm-mips/sibyte/sb1250.h delete mode 100644 include/asm-mips/sibyte/sb1250_defs.h delete mode 100644 include/asm-mips/sibyte/sb1250_dma.h delete mode 100644 include/asm-mips/sibyte/sb1250_genbus.h delete mode 100644 include/asm-mips/sibyte/sb1250_int.h delete mode 100644 include/asm-mips/sibyte/sb1250_l2c.h delete mode 100644 include/asm-mips/sibyte/sb1250_ldt.h delete mode 100644 include/asm-mips/sibyte/sb1250_mac.h delete mode 100644 include/asm-mips/sibyte/sb1250_mc.h delete mode 100644 include/asm-mips/sibyte/sb1250_regs.h delete mode 100644 include/asm-mips/sibyte/sb1250_scd.h delete mode 100644 include/asm-mips/sibyte/sb1250_smbus.h delete mode 100644 include/asm-mips/sibyte/sb1250_syncser.h delete mode 100644 include/asm-mips/sibyte/sb1250_uart.h delete mode 100644 include/asm-mips/sibyte/sentosa.h delete mode 100644 include/asm-mips/sibyte/swarm.h delete mode 100644 include/asm-mips/sigcontext.h delete mode 100644 include/asm-mips/siginfo.h delete mode 100644 include/asm-mips/signal.h delete mode 100644 include/asm-mips/sim.h delete mode 100644 include/asm-mips/smp-ops.h delete mode 100644 include/asm-mips/smp.h delete mode 100644 include/asm-mips/smtc.h delete mode 100644 include/asm-mips/smtc_ipi.h delete mode 100644 include/asm-mips/smtc_proc.h delete mode 100644 include/asm-mips/smvp.h delete mode 100644 include/asm-mips/sn/addrs.h delete mode 100644 include/asm-mips/sn/agent.h delete mode 100644 include/asm-mips/sn/arch.h delete mode 100644 include/asm-mips/sn/fru.h delete mode 100644 include/asm-mips/sn/gda.h delete mode 100644 include/asm-mips/sn/hub.h delete mode 100644 include/asm-mips/sn/intr.h delete mode 100644 include/asm-mips/sn/io.h delete mode 100644 include/asm-mips/sn/ioc3.h delete mode 100644 include/asm-mips/sn/klconfig.h delete mode 100644 include/asm-mips/sn/kldir.h delete mode 100644 include/asm-mips/sn/klkernvars.h delete mode 100644 include/asm-mips/sn/launch.h delete mode 100644 include/asm-mips/sn/mapped_kernel.h delete mode 100644 include/asm-mips/sn/nmi.h delete mode 100644 include/asm-mips/sn/sn0/addrs.h delete mode 100644 include/asm-mips/sn/sn0/arch.h delete mode 100644 include/asm-mips/sn/sn0/hub.h delete mode 100644 include/asm-mips/sn/sn0/hubio.h delete mode 100644 include/asm-mips/sn/sn0/hubmd.h delete mode 100644 include/asm-mips/sn/sn0/hubni.h delete mode 100644 include/asm-mips/sn/sn0/hubpi.h delete mode 100644 include/asm-mips/sn/sn0/ip27.h delete mode 100644 include/asm-mips/sn/sn_private.h delete mode 100644 include/asm-mips/sn/types.h delete mode 100644 include/asm-mips/sni.h delete mode 100644 include/asm-mips/socket.h delete mode 100644 include/asm-mips/sockios.h delete mode 100644 include/asm-mips/sparsemem.h delete mode 100644 include/asm-mips/spinlock.h delete mode 100644 include/asm-mips/spinlock_types.h delete mode 100644 include/asm-mips/stackframe.h delete mode 100644 include/asm-mips/stacktrace.h delete mode 100644 include/asm-mips/stat.h delete mode 100644 include/asm-mips/statfs.h delete mode 100644 include/asm-mips/string.h delete mode 100644 include/asm-mips/suspend.h delete mode 100644 include/asm-mips/sysmips.h delete mode 100644 include/asm-mips/system.h delete mode 100644 include/asm-mips/termbits.h delete mode 100644 include/asm-mips/termios.h delete mode 100644 include/asm-mips/thread_info.h delete mode 100644 include/asm-mips/time.h delete mode 100644 include/asm-mips/timex.h delete mode 100644 include/asm-mips/titan_dep.h delete mode 100644 include/asm-mips/tlb.h delete mode 100644 include/asm-mips/tlbdebug.h delete mode 100644 include/asm-mips/tlbflush.h delete mode 100644 include/asm-mips/topology.h delete mode 100644 include/asm-mips/traps.h delete mode 100644 include/asm-mips/txx9/boards.h delete mode 100644 include/asm-mips/txx9/generic.h delete mode 100644 include/asm-mips/txx9/jmr3927.h delete mode 100644 include/asm-mips/txx9/pci.h delete mode 100644 include/asm-mips/txx9/rbtx4927.h delete mode 100644 include/asm-mips/txx9/rbtx4938.h delete mode 100644 include/asm-mips/txx9/rbtx4939.h delete mode 100644 include/asm-mips/txx9/smsc_fdc37m81x.h delete mode 100644 include/asm-mips/txx9/spi.h delete mode 100644 include/asm-mips/txx9/tx3927.h delete mode 100644 include/asm-mips/txx9/tx4927.h delete mode 100644 include/asm-mips/txx9/tx4927pcic.h delete mode 100644 include/asm-mips/txx9/tx4938.h delete mode 100644 include/asm-mips/txx9/tx4939.h delete mode 100644 include/asm-mips/txx9irq.h delete mode 100644 include/asm-mips/txx9pio.h delete mode 100644 include/asm-mips/txx9tmr.h delete mode 100644 include/asm-mips/types.h delete mode 100644 include/asm-mips/uaccess.h delete mode 100644 include/asm-mips/ucontext.h delete mode 100644 include/asm-mips/unaligned.h delete mode 100644 include/asm-mips/unistd.h delete mode 100644 include/asm-mips/user.h delete mode 100644 include/asm-mips/vga.h delete mode 100644 include/asm-mips/vpe.h delete mode 100644 include/asm-mips/vr41xx/capcella.h delete mode 100644 include/asm-mips/vr41xx/giu.h delete mode 100644 include/asm-mips/vr41xx/irq.h delete mode 100644 include/asm-mips/vr41xx/mpc30x.h delete mode 100644 include/asm-mips/vr41xx/pci.h delete mode 100644 include/asm-mips/vr41xx/siu.h delete mode 100644 include/asm-mips/vr41xx/tb0219.h delete mode 100644 include/asm-mips/vr41xx/tb0226.h delete mode 100644 include/asm-mips/vr41xx/tb0287.h delete mode 100644 include/asm-mips/vr41xx/vr41xx.h delete mode 100644 include/asm-mips/war.h delete mode 100644 include/asm-mips/wbflush.h delete mode 100644 include/asm-mips/xor.h delete mode 100644 include/asm-mips/xtalk/xtalk.h delete mode 100644 include/asm-mips/xtalk/xwidget.h (limited to 'arch/mips') diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 4401a0c1278c..7f39fd8a91fe 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -170,97 +170,97 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/ # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. # core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ -cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/asm-mips/mach-jazz +cflags-$(CONFIG_MACH_JAZZ) += -I$(srctree)/arch/mips/include/asm/mach-jazz load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 # # Common Alchemy Au1x00 stuff # core-$(CONFIG_SOC_AU1X00) += arch/mips/alchemy/common/ -cflags-$(CONFIG_SOC_AU1X00) += -Iinclude/asm-mips/mach-au1x00 +cflags-$(CONFIG_SOC_AU1X00) += -I$(srctree)/arch/mips/include/asm/mach-au1x00 # # AMD Alchemy Pb1000 eval board # libs-$(CONFIG_MIPS_PB1000) += arch/mips/alchemy/pb1000/ -cflags-$(CONFIG_MIPS_PB1000) += -Iinclude/asm-mips/mach-pb1x00 +cflags-$(CONFIG_MIPS_PB1000) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1000) += 0xffffffff80100000 # # AMD Alchemy Pb1100 eval board # libs-$(CONFIG_MIPS_PB1100) += arch/mips/alchemy/pb1100/ -cflags-$(CONFIG_MIPS_PB1100) += -Iinclude/asm-mips/mach-pb1x00 +cflags-$(CONFIG_MIPS_PB1100) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000 # # AMD Alchemy Pb1500 eval board # libs-$(CONFIG_MIPS_PB1500) += arch/mips/alchemy/pb1500/ -cflags-$(CONFIG_MIPS_PB1500) += -Iinclude/asm-mips/mach-pb1x00 +cflags-$(CONFIG_MIPS_PB1500) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000 # # AMD Alchemy Pb1550 eval board # libs-$(CONFIG_MIPS_PB1550) += arch/mips/alchemy/pb1550/ -cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00 +cflags-$(CONFIG_MIPS_PB1550) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000 # # AMD Alchemy Pb1200 eval board # libs-$(CONFIG_MIPS_PB1200) += arch/mips/alchemy/pb1200/ -cflags-$(CONFIG_MIPS_PB1200) += -Iinclude/asm-mips/mach-pb1x00 +cflags-$(CONFIG_MIPS_PB1200) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000 # # AMD Alchemy Db1000 eval board # libs-$(CONFIG_MIPS_DB1000) += arch/mips/alchemy/db1x00/ -cflags-$(CONFIG_MIPS_DB1000) += -Iinclude/asm-mips/mach-db1x00 +cflags-$(CONFIG_MIPS_DB1000) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000 # # AMD Alchemy Db1100 eval board # libs-$(CONFIG_MIPS_DB1100) += arch/mips/alchemy/db1x00/ -cflags-$(CONFIG_MIPS_DB1100) += -Iinclude/asm-mips/mach-db1x00 +cflags-$(CONFIG_MIPS_DB1100) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1100) += 0xffffffff80100000 # # AMD Alchemy Db1500 eval board # libs-$(CONFIG_MIPS_DB1500) += arch/mips/alchemy/db1x00/ -cflags-$(CONFIG_MIPS_DB1500) += -Iinclude/asm-mips/mach-db1x00 +cflags-$(CONFIG_MIPS_DB1500) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1500) += 0xffffffff80100000 # # AMD Alchemy Db1550 eval board # libs-$(CONFIG_MIPS_DB1550) += arch/mips/alchemy/db1x00/ -cflags-$(CONFIG_MIPS_DB1550) += -Iinclude/asm-mips/mach-db1x00 +cflags-$(CONFIG_MIPS_DB1550) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000 # # AMD Alchemy Db1200 eval board # libs-$(CONFIG_MIPS_DB1200) += arch/mips/alchemy/pb1200/ -cflags-$(CONFIG_MIPS_DB1200) += -Iinclude/asm-mips/mach-db1x00 +cflags-$(CONFIG_MIPS_DB1200) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000 # # AMD Alchemy Bosporus eval board # libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/alchemy/db1x00/ -cflags-$(CONFIG_MIPS_BOSPORUS) += -Iinclude/asm-mips/mach-db1x00 +cflags-$(CONFIG_MIPS_BOSPORUS) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_BOSPORUS) += 0xffffffff80100000 # # AMD Alchemy Mirage eval board # libs-$(CONFIG_MIPS_MIRAGE) += arch/mips/alchemy/db1x00/ -cflags-$(CONFIG_MIPS_MIRAGE) += -Iinclude/asm-mips/mach-db1x00 +cflags-$(CONFIG_MIPS_MIRAGE) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_MIRAGE) += 0xffffffff80100000 # @@ -279,14 +279,14 @@ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 # Cobalt Server # core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/ -cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt +cflags-$(CONFIG_MIPS_COBALT) += -I$(srctree)/arch/mips/include/asm/mach-cobalt load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 # # DECstation family # core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/ -cflags-$(CONFIG_MACH_DECSTATION)+= -Iinclude/asm-mips/mach-dec +cflags-$(CONFIG_MACH_DECSTATION)+= -I$(srctree)/arch/mips/include/asm/mach-dec libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/ load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000 @@ -294,7 +294,7 @@ load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000 # Wind River PPMC Board (4KC + GT64120) # core-$(CONFIG_WR_PPMC) += arch/mips/gt64120/wrppmc/ -cflags-$(CONFIG_WR_PPMC) += -Iinclude/asm-mips/mach-wrppmc +cflags-$(CONFIG_WR_PPMC) += -I$(srctree)/arch/mips/include/asm/mach-wrppmc load-$(CONFIG_WR_PPMC) += 0xffffffff80100000 # @@ -302,13 +302,13 @@ load-$(CONFIG_WR_PPMC) += 0xffffffff80100000 # core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/ load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000 -cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote +cflags-$(CONFIG_LEMOTE_FULONG) += -I$(srctree)/arch/mips/include/asm/mach-lemote # # MIPS Malta board # core-$(CONFIG_MIPS_MALTA) += arch/mips/mti-malta/ -cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-malta +cflags-$(CONFIG_MIPS_MALTA) += -I$(srctree)/arch/mips/include/asm/mach-malta load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 all-$(CONFIG_MIPS_MALTA) := vmlinux.bin @@ -316,14 +316,14 @@ all-$(CONFIG_MIPS_MALTA) := vmlinux.bin # MIPS SIM # core-$(CONFIG_MIPS_SIM) += arch/mips/mipssim/ -cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-mipssim +cflags-$(CONFIG_MIPS_SIM) += -I$(srctree)/arch/mips/include/asm/mach-mipssim load-$(CONFIG_MIPS_SIM) += 0x80100000 # # PMC-Sierra MSP SOCs # core-$(CONFIG_PMC_MSP) += arch/mips/pmc-sierra/msp71xx/ -cflags-$(CONFIG_PMC_MSP) += -Iinclude/asm-mips/pmc-sierra/msp71xx \ +cflags-$(CONFIG_PMC_MSP) += -I$(srctree)/arch/mips/include/asm/pmc-sierra/msp71xx \ -mno-branch-likely load-$(CONFIG_PMC_MSP) += 0xffffffff80100000 @@ -331,28 +331,28 @@ load-$(CONFIG_PMC_MSP) += 0xffffffff80100000 # PMC-Sierra Yosemite # core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/ -cflags-$(CONFIG_PMC_YOSEMITE) += -Iinclude/asm-mips/mach-yosemite +cflags-$(CONFIG_PMC_YOSEMITE) += -I$(srctree)/arch/mips/include/asm/mach-yosemite load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000 # # Basler eXcite # core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/ -cflags-$(CONFIG_BASLER_EXCITE) += -Iinclude/asm-mips/mach-excite +cflags-$(CONFIG_BASLER_EXCITE) += -I$(srctree)/arch/mips/include/asm/mach-excite load-$(CONFIG_BASLER_EXCITE) += 0x80100000 # # LASAT platforms # core-$(CONFIG_LASAT) += arch/mips/lasat/ -cflags-$(CONFIG_LASAT) += -Iinclude/asm-mips/mach-lasat +cflags-$(CONFIG_LASAT) += -I$(srctree)/arch/mips/include/asm/mach-lasat load-$(CONFIG_LASAT) += 0xffffffff80000000 # # Common VR41xx # core-$(CONFIG_MACH_VR41XX) += arch/mips/vr41xx/common/ -cflags-$(CONFIG_MACH_VR41XX) += -Iinclude/asm-mips/mach-vr41xx +cflags-$(CONFIG_MACH_VR41XX) += -I$(srctree)/arch/mips/include/asm/mach-vr41xx # # ZAO Networks Capcella (VR4131) @@ -385,13 +385,13 @@ load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000 # Common NXP PNX8550 # core-$(CONFIG_SOC_PNX8550) += arch/mips/nxp/pnx8550/common/ -cflags-$(CONFIG_SOC_PNX8550) += -Iinclude/asm-mips/mach-pnx8550 +cflags-$(CONFIG_SOC_PNX8550) += -I$(srctree)/arch/mips/include/asm/mach-pnx8550 # # NXP PNX8550 JBS board # libs-$(CONFIG_PNX8550_JBS) += arch/mips/nxp/pnx8550/jbs/ -#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550 +#cflags-$(CONFIG_PNX8550_JBS) += -I$(srctree)/arch/mips/include/asm/mach-pnx8550 load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 # NXP PNX8550 STB810 board @@ -402,7 +402,7 @@ load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000 # NEC EMMA2RH boards # core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/ -cflags-$(CONFIG_EMMA2RH) += -Iinclude/asm-mips/mach-emma2rh +cflags-$(CONFIG_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh # NEC EMMA2RH Mark-eins core-$(CONFIG_MARKEINS) += arch/mips/emma2rh/markeins/ @@ -418,7 +418,7 @@ load-$(CONFIG_MARKEINS) += 0xffffffff88100000 # address by 8kb. # core-$(CONFIG_SGI_IP22) += arch/mips/sgi-ip22/ -cflags-$(CONFIG_SGI_IP22) += -Iinclude/asm-mips/mach-ip22 +cflags-$(CONFIG_SGI_IP22) += -I$(srctree)/arch/mips/include/asm/mach-ip22 ifdef CONFIG_32BIT load-$(CONFIG_SGI_IP22) += 0xffffffff88002000 endif @@ -435,7 +435,7 @@ endif # ifdef CONFIG_SGI_IP27 core-$(CONFIG_SGI_IP27) += arch/mips/sgi-ip27/ -cflags-$(CONFIG_SGI_IP27) += -Iinclude/asm-mips/mach-ip27 +cflags-$(CONFIG_SGI_IP27) += -I$(srctree)/arch/mips/include/asm/mach-ip27 ifdef CONFIG_MAPPED_KERNEL load-$(CONFIG_SGI_IP27) += 0xc00000004001c000 OBJCOPYFLAGS := --change-addresses=0x3fffffff80000000 @@ -460,7 +460,7 @@ ifdef CONFIG_SGI_IP28 endif endif core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ -cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28 +cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28 load-$(CONFIG_SGI_IP28) += 0xa800000020004000 # @@ -472,7 +472,7 @@ load-$(CONFIG_SGI_IP28) += 0xa800000020004000 # will break. # core-$(CONFIG_SGI_IP32) += arch/mips/sgi-ip32/ -cflags-$(CONFIG_SGI_IP32) += -Iinclude/asm-mips/mach-ip32 +cflags-$(CONFIG_SGI_IP32) += -I$(srctree)/arch/mips/include/asm/mach-ip32 load-$(CONFIG_SGI_IP32) += 0xffffffff80004000 # @@ -484,22 +484,22 @@ load-$(CONFIG_SGI_IP32) += 0xffffffff80004000 # core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/ core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/common/ -cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \ +cflags-$(CONFIG_SIBYTE_BCM112X) += -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/ core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/common/ -cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \ +cflags-$(CONFIG_SIBYTE_SB1250) += -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/ core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/common/ -cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \ +cflags-$(CONFIG_SIBYTE_BCM1x55) += -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/ core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/common/ -cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \ +cflags-$(CONFIG_SIBYTE_BCM1x80) += -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL # @@ -529,14 +529,14 @@ load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 # Broadcom BCM47XX boards # core-$(CONFIG_BCM47XX) += arch/mips/bcm47xx/ -cflags-$(CONFIG_BCM47XX) += -Iinclude/asm-mips/mach-bcm47xx +cflags-$(CONFIG_BCM47XX) += -I$(srctree)/arch/mips/include/asm/mach-bcm47xx load-$(CONFIG_BCM47XX) := 0xffffffff80001000 # # SNI RM # core-$(CONFIG_SNI_RM) += arch/mips/sni/ -cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm +cflags-$(CONFIG_SNI_RM) += -I$(srctree)/arch/mips/include/asm/mach-rm ifdef CONFIG_CPU_LITTLE_ENDIAN load-$(CONFIG_SNI_RM) += 0xffffffff80600000 else @@ -548,10 +548,10 @@ all-$(CONFIG_SNI_RM) := vmlinux.ecoff # Common TXx9 # core-$(CONFIG_MACH_TX39XX) += arch/mips/txx9/generic/ -cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-tx39xx +cflags-$(CONFIG_MACH_TX39XX) += -I$(srctree)/arch/mips/include/asm/mach-tx39xx load-$(CONFIG_MACH_TX39XX) += 0xffffffff80050000 core-$(CONFIG_MACH_TX49XX) += arch/mips/txx9/generic/ -cflags-$(CONFIG_MACH_TX49XX) += -Iinclude/asm-mips/mach-tx49xx +cflags-$(CONFIG_MACH_TX49XX) += -I$(srctree)/arch/mips/include/asm/mach-tx49xx load-$(CONFIG_MACH_TX49XX) += 0xffffffff80100000 # @@ -563,7 +563,7 @@ core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/txx9/jmr3927/ # Routerboard 532 board # core-$(CONFIG_MIKROTIK_RB532) += arch/mips/rb532/ -cflags-$(CONFIG_MIKROTIK_RB532) += -Iinclude/asm-mips/mach-rc32434 +cflags-$(CONFIG_MIKROTIK_RB532) += -I$(srctree)/arch/mips/include/asm/mach-rc32434 load-$(CONFIG_MIKROTIK_RB532) += 0xffffffff80101000 # @@ -573,7 +573,7 @@ core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/rbtx4927/ core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/ core-$(CONFIG_TOSHIBA_RBTX4939) += arch/mips/txx9/rbtx4939/ -cflags-y += -Iinclude/asm-mips/mach-generic +cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ ifdef CONFIG_32BIT diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild new file mode 100644 index 000000000000..7897f05e3165 --- /dev/null +++ b/arch/mips/include/asm/Kbuild @@ -0,0 +1,3 @@ +include include/asm-generic/Kbuild.asm + +header-y += cachectl.h sgidefs.h sysmips.h diff --git a/arch/mips/include/asm/a.out.h b/arch/mips/include/asm/a.out.h new file mode 100644 index 000000000000..cad8371422ab --- /dev/null +++ b/arch/mips/include/asm/a.out.h @@ -0,0 +1,35 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2003 by Ralf Baechle + */ +#ifndef _ASM_A_OUT_H +#define _ASM_A_OUT_H + +#ifdef __KERNEL__ + + +#endif + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for + file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, + in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in + bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* _ASM_A_OUT_H */ diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h new file mode 100644 index 000000000000..1dd74fbdc09b --- /dev/null +++ b/arch/mips/include/asm/abi.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005, 06 by Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2005 MIPS Technologies, Inc. + */ +#ifndef _ASM_ABI_H +#define _ASM_ABI_H + +#include +#include + +struct mips_abi { + int (* const setup_frame)(struct k_sigaction * ka, + struct pt_regs *regs, int signr, + sigset_t *set); + int (* const setup_rt_frame)(struct k_sigaction * ka, + struct pt_regs *regs, int signr, + sigset_t *set, siginfo_t *info); + const unsigned long restart; +}; + +#endif /* _ASM_ABI_H */ diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h new file mode 100644 index 000000000000..569f80aacbd2 --- /dev/null +++ b/arch/mips/include/asm/addrspace.h @@ -0,0 +1,154 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 99 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999 by Silicon Graphics, Inc. + */ +#ifndef _ASM_ADDRSPACE_H +#define _ASM_ADDRSPACE_H + +#include + +/* + * Configure language + */ +#ifdef __ASSEMBLY__ +#define _ATYPE_ +#define _ATYPE32_ +#define _ATYPE64_ +#define _CONST64_(x) x +#else +#define _ATYPE_ __PTRDIFF_TYPE__ +#define _ATYPE32_ int +#define _ATYPE64_ __s64 +#ifdef CONFIG_64BIT +#define _CONST64_(x) x ## L +#else +#define _CONST64_(x) x ## LL +#endif +#endif + +/* + * 32-bit MIPS address spaces + */ +#ifdef __ASSEMBLY__ +#define _ACAST32_ +#define _ACAST64_ +#else +#define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ +#define _ACAST64_ (_ATYPE64_) /* do _not_ narrow */ +#endif + +/* + * Returns the kernel segment base of a given address + */ +#define KSEGX(a) ((_ACAST32_ (a)) & 0xe0000000) + +/* + * Returns the physical address of a CKSEGx / XKPHYS address + */ +#define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) +#define XPHYSADDR(a) ((_ACAST64_(a)) & \ + _CONST64_(0x000000ffffffffff)) + +#ifdef CONFIG_64BIT + +/* + * Memory segments (64bit kernel mode addresses) + * The compatibility segments use the full 64-bit sign extended value. Note + * the R8000 doesn't have them so don't reference these in generic MIPS code. + */ +#define XKUSEG _CONST64_(0x0000000000000000) +#define XKSSEG _CONST64_(0x4000000000000000) +#define XKPHYS _CONST64_(0x8000000000000000) +#define XKSEG _CONST64_(0xc000000000000000) +#define CKSEG0 _CONST64_(0xffffffff80000000) +#define CKSEG1 _CONST64_(0xffffffffa0000000) +#define CKSSEG _CONST64_(0xffffffffc0000000) +#define CKSEG3 _CONST64_(0xffffffffe0000000) + +#define CKSEG0ADDR(a) (CPHYSADDR(a) | CKSEG0) +#define CKSEG1ADDR(a) (CPHYSADDR(a) | CKSEG1) +#define CKSEG2ADDR(a) (CPHYSADDR(a) | CKSEG2) +#define CKSEG3ADDR(a) (CPHYSADDR(a) | CKSEG3) + +#else + +#define CKSEG0ADDR(a) (CPHYSADDR(a) | KSEG0) +#define CKSEG1ADDR(a) (CPHYSADDR(a) | KSEG1) +#define CKSEG2ADDR(a) (CPHYSADDR(a) | KSEG2) +#define CKSEG3ADDR(a) (CPHYSADDR(a) | KSEG3) + +/* + * Map an address to a certain kernel segment + */ +#define KSEG0ADDR(a) (CPHYSADDR(a) | KSEG0) +#define KSEG1ADDR(a) (CPHYSADDR(a) | KSEG1) +#define KSEG2ADDR(a) (CPHYSADDR(a) | KSEG2) +#define KSEG3ADDR(a) (CPHYSADDR(a) | KSEG3) + +/* + * Memory segments (32bit kernel mode addresses) + * These are the traditional names used in the 32-bit universe. + */ +#define KUSEG 0x00000000 +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 +#define KSEG2 0xc0000000 +#define KSEG3 0xe0000000 + +#define CKUSEG 0x00000000 +#define CKSEG0 0x80000000 +#define CKSEG1 0xa0000000 +#define CKSEG2 0xc0000000 +#define CKSEG3 0xe0000000 + +#endif + +/* + * Cache modes for XKPHYS address conversion macros + */ +#define K_CALG_COH_EXCL1_NOL2 0 +#define K_CALG_COH_SHRL1_NOL2 1 +#define K_CALG_UNCACHED 2 +#define K_CALG_NONCOHERENT 3 +#define K_CALG_COH_EXCL 4 +#define K_CALG_COH_SHAREABLE 5 +#define K_CALG_NOTUSED 6 +#define K_CALG_UNCACHED_ACCEL 7 + +/* + * 64-bit address conversions + */ +#define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p)) +#define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p)) +#define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK) +#define PHYS_TO_XKPHYS(cm, a) (_CONST64_(0x8000000000000000) | \ + (_CONST64_(cm) << 59) | (a)) + +/* + * The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting + * the region, 3 bits for the CCA mode. This leaves 59 bits of which the + * R8000 implements most with its 48-bit physical address space. + */ +#define TO_PHYS_MASK _CONST64_(0x07ffffffffffffff) /* 2^^59 - 1 */ + +#ifndef CONFIG_CPU_R8000 + +/* + * The R8000 doesn't have the 32-bit compat spaces so we don't define them + * in order to catch bugs in the source code. + */ + +#define COMPAT_K1BASE32 _CONST64_(0xffffffffa0000000) +#define PHYS_TO_COMPATK1(x) ((x) | COMPAT_K1BASE32) /* 32-bit compat k1 */ + +#endif + +#define KDM_TO_PHYS(x) (_ACAST64_ (x) & TO_PHYS_MASK) +#define PHYS_TO_K0(x) (_ACAST64_ (x) | CAC_BASE) + +#endif /* _ASM_ADDRSPACE_H */ diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h new file mode 100644 index 000000000000..608cfcfbb3ea --- /dev/null +++ b/arch/mips/include/asm/asm.h @@ -0,0 +1,409 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle + * Copyright (C) 1999 by Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + * Copyright (C) 2002 Maciej W. Rozycki + * + * Some useful macros for MIPS assembler code + * + * Some of the routines below contain useless nops that will be optimized + * away by gas in -O mode. These nops are however required to fill delay + * slots in noreorder mode. + */ +#ifndef __ASM_ASM_H +#define __ASM_ASM_H + +#include + +#ifndef CAT +#ifdef __STDC__ +#define __CAT(str1, str2) str1##str2 +#else +#define __CAT(str1, str2) str1/**/str2 +#endif +#define CAT(str1, str2) __CAT(str1, str2) +#endif + +/* + * PIC specific declarations + * Not used for the kernel but here seems to be the right place. + */ +#ifdef __PIC__ +#define CPRESTORE(register) \ + .cprestore register +#define CPADD(register) \ + .cpadd register +#define CPLOAD(register) \ + .cpload register +#else +#define CPRESTORE(register) +#define CPADD(register) +#define CPLOAD(register) +#endif + +/* + * LEAF - declare leaf routine + */ +#define LEAF(symbol) \ + .globl symbol; \ + .align 2; \ + .type symbol, @function; \ + .ent symbol, 0; \ +symbol: .frame sp, 0, ra + +/* + * NESTED - declare nested routine entry point + */ +#define NESTED(symbol, framesize, rpc) \ + .globl symbol; \ + .align 2; \ + .type symbol, @function; \ + .ent symbol, 0; \ +symbol: .frame sp, framesize, rpc + +/* + * END - mark end of function + */ +#define END(function) \ + .end function; \ + .size function, .-function + +/* + * EXPORT - export definition of symbol + */ +#define EXPORT(symbol) \ + .globl symbol; \ +symbol: + +/* + * FEXPORT - export definition of a function symbol + */ +#define FEXPORT(symbol) \ + .globl symbol; \ + .type symbol, @function; \ +symbol: + +/* + * ABS - export absolute symbol + */ +#define ABS(symbol,value) \ + .globl symbol; \ +symbol = value + +#define PANIC(msg) \ + .set push; \ + .set reorder; \ + PTR_LA a0, 8f; \ + jal panic; \ +9: b 9b; \ + .set pop; \ + TEXT(msg) + +/* + * Print formatted string + */ +#ifdef CONFIG_PRINTK +#define PRINT(string) \ + .set push; \ + .set reorder; \ + PTR_LA a0, 8f; \ + jal printk; \ + .set pop; \ + TEXT(string) +#else +#define PRINT(string) +#endif + +#define TEXT(msg) \ + .pushsection .data; \ +8: .asciiz msg; \ + .popsection; + +/* + * Build text tables + */ +#define TTABLE(string) \ + .pushsection .text; \ + .word 1f; \ + .popsection \ + .pushsection .data; \ +1: .asciiz string; \ + .popsection + +/* + * MIPS IV pref instruction. + * Use with .set noreorder only! + * + * MIPS IV implementations are free to treat this as a nop. The R5000 + * is one of them. So we should have an option not to use this instruction. + */ +#ifdef CONFIG_CPU_HAS_PREFETCH + +#define PREF(hint,addr) \ + .set push; \ + .set mips4; \ + pref hint, addr; \ + .set pop + +#define PREFX(hint,addr) \ + .set push; \ + .set mips4; \ + prefx hint, addr; \ + .set pop + +#else /* !CONFIG_CPU_HAS_PREFETCH */ + +#define PREF(hint, addr) +#define PREFX(hint, addr) + +#endif /* !CONFIG_CPU_HAS_PREFETCH */ + +/* + * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs. + */ +#if (_MIPS_ISA == _MIPS_ISA_MIPS1) +#define MOVN(rd, rs, rt) \ + .set push; \ + .set reorder; \ + beqz rt, 9f; \ + move rd, rs; \ + .set pop; \ +9: +#define MOVZ(rd, rs, rt) \ + .set push; \ + .set reorder; \ + bnez rt, 9f; \ + move rd, rs; \ + .set pop; \ +9: +#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */ +#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) +#define MOVN(rd, rs, rt) \ + .set push; \ + .set noreorder; \ + bnezl rt, 9f; \ + move rd, rs; \ + .set pop; \ +9: +#define MOVZ(rd, rs, rt) \ + .set push; \ + .set noreorder; \ + beqzl rt, 9f; \ + move rd, rs; \ + .set pop; \ +9: +#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */ +#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64) +#define MOVN(rd, rs, rt) \ + movn rd, rs, rt +#define MOVZ(rd, rs, rt) \ + movz rd, rs, rt +#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */ + +/* + * Stack alignment + */ +#if (_MIPS_SIM == _MIPS_SIM_ABI32) +#define ALSZ 7 +#define ALMASK ~7 +#endif +#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) +#define ALSZ 15 +#define ALMASK ~15 +#endif + +/* + * Macros to handle different pointer/register sizes for 32/64-bit code + */ + +/* + * Size of a register + */ +#ifdef __mips64 +#define SZREG 8 +#else +#define SZREG 4 +#endif + +/* + * Use the following macros in assemblercode to load/store registers, + * pointers etc. + */ +#if (_MIPS_SIM == _MIPS_SIM_ABI32) +#define REG_S sw +#define REG_L lw +#define REG_SUBU subu +#define REG_ADDU addu +#endif +#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) +#define REG_S sd +#define REG_L ld +#define REG_SUBU dsubu +#define REG_ADDU daddu +#endif + +/* + * How to add/sub/load/store/shift C int variables. + */ +#if (_MIPS_SZINT == 32) +#define INT_ADD add +#define INT_ADDU addu +#define INT_ADDI addi +#define INT_ADDIU addiu +#define INT_SUB sub +#define INT_SUBU subu +#define INT_L lw +#define INT_S sw +#define INT_SLL sll +#define INT_SLLV sllv +#define INT_SRL srl +#define INT_SRLV srlv +#define INT_SRA sra +#define INT_SRAV srav +#endif + +#if (_MIPS_SZINT == 64) +#define INT_ADD dadd +#define INT_ADDU daddu +#define INT_ADDI daddi +#define INT_ADDIU daddiu +#define INT_SUB dsub +#define INT_SUBU dsubu +#define INT_L ld +#define INT_S sd +#define INT_SLL dsll +#define INT_SLLV dsllv +#define INT_SRL dsrl +#define INT_SRLV dsrlv +#define INT_SRA dsra +#define INT_SRAV dsrav +#endif + +/* + * How to add/sub/load/store/shift C long variables. + */ +#if (_MIPS_SZLONG == 32) +#define LONG_ADD add +#define LONG_ADDU addu +#define LONG_ADDI addi +#define LONG_ADDIU addiu +#define LONG_SUB sub +#define LONG_SUBU subu +#define LONG_L lw +#define LONG_S sw +#define LONG_SLL sll +#define LONG_SLLV sllv +#define LONG_SRL srl +#define LONG_SRLV srlv +#define LONG_SRA sra +#define LONG_SRAV srav + +#define LONG .word +#define LONGSIZE 4 +#define LONGMASK 3 +#define LONGLOG 2 +#endif + +#if (_MIPS_SZLONG == 64) +#define LONG_ADD dadd +#define LONG_ADDU daddu +#define LONG_ADDI daddi +#define LONG_ADDIU daddiu +#define LONG_SUB dsub +#define LONG_SUBU dsubu +#define LONG_L ld +#define LONG_S sd +#define LONG_SLL dsll +#define LONG_SLLV dsllv +#define LONG_SRL dsrl +#define LONG_SRLV dsrlv +#define LONG_SRA dsra +#define LONG_SRAV dsrav + +#define LONG .dword +#define LONGSIZE 8 +#define LONGMASK 7 +#define LONGLOG 3 +#endif + +/* + * How to add/sub/load/store/shift pointers. + */ +#if (_MIPS_SZPTR == 32) +#define PTR_ADD add +#define PTR_ADDU addu +#define PTR_ADDI addi +#define PTR_ADDIU addiu +#define PTR_SUB sub +#define PTR_SUBU subu +#define PTR_L lw +#define PTR_S sw +#define PTR_LA la +#define PTR_LI li +#define PTR_SLL sll +#define PTR_SLLV sllv +#define PTR_SRL srl +#define PTR_SRLV srlv +#define PTR_SRA sra +#define PTR_SRAV srav + +#define PTR_SCALESHIFT 2 + +#define PTR .word +#define PTRSIZE 4 +#define PTRLOG 2 +#endif + +#if (_MIPS_SZPTR == 64) +#define PTR_ADD dadd +#define PTR_ADDU daddu +#define PTR_ADDI daddi +#define PTR_ADDIU daddiu +#define PTR_SUB dsub +#define PTR_SUBU dsubu +#define PTR_L ld +#define PTR_S sd +#define PTR_LA dla +#define PTR_LI dli +#define PTR_SLL dsll +#define PTR_SLLV dsllv +#define PTR_SRL dsrl +#define PTR_SRLV dsrlv +#define PTR_SRA dsra +#define PTR_SRAV dsrav + +#define PTR_SCALESHIFT 3 + +#define PTR .dword +#define PTRSIZE 8 +#define PTRLOG 3 +#endif + +/* + * Some cp0 registers were extended to 64bit for MIPS III. + */ +#if (_MIPS_SIM == _MIPS_SIM_ABI32) +#define MFC0 mfc0 +#define MTC0 mtc0 +#endif +#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) +#define MFC0 dmfc0 +#define MTC0 dmtc0 +#endif + +#define SSNOP sll zero, zero, 1 + +#ifdef CONFIG_SGI_IP28 +/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */ +#include +#define R10KCBARRIER(addr) cache Cache_Barrier, addr; +#else +#define R10KCBARRIER(addr) +#endif + +#endif /* __ASM_ASM_H */ diff --git a/arch/mips/include/asm/asmmacro-32.h b/arch/mips/include/asm/asmmacro-32.h new file mode 100644 index 000000000000..5de3963f511e --- /dev/null +++ b/arch/mips/include/asm/asmmacro-32.h @@ -0,0 +1,158 @@ +/* + * asmmacro.h: Assembler macros to make things easier to read. + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1998, 1999, 2003 Ralf Baechle + */ +#ifndef _ASM_ASMMACRO_32_H +#define _ASM_ASMMACRO_32_H + +#include +#include +#include +#include + + .macro fpu_save_double thread status tmp1=t0 + cfc1 \tmp1, fcr31 + sdc1 $f0, THREAD_FPR0(\thread) + sdc1 $f2, THREAD_FPR2(\thread) + sdc1 $f4, THREAD_FPR4(\thread) + sdc1 $f6, THREAD_FPR6(\thread) + sdc1 $f8, THREAD_FPR8(\thread) + sdc1 $f10, THREAD_FPR10(\thread) + sdc1 $f12, THREAD_FPR12(\thread) + sdc1 $f14, THREAD_FPR14(\thread) + sdc1 $f16, THREAD_FPR16(\thread) + sdc1 $f18, THREAD_FPR18(\thread) + sdc1 $f20, THREAD_FPR20(\thread) + sdc1 $f22, THREAD_FPR22(\thread) + sdc1 $f24, THREAD_FPR24(\thread) + sdc1 $f26, THREAD_FPR26(\thread) + sdc1 $f28, THREAD_FPR28(\thread) + sdc1 $f30, THREAD_FPR30(\thread) + sw \tmp1, THREAD_FCR31(\thread) + .endm + + .macro fpu_save_single thread tmp=t0 + cfc1 \tmp, fcr31 + swc1 $f0, THREAD_FPR0(\thread) + swc1 $f1, THREAD_FPR1(\thread) + swc1 $f2, THREAD_FPR2(\thread) + swc1 $f3, THREAD_FPR3(\thread) + swc1 $f4, THREAD_FPR4(\thread) + swc1 $f5, THREAD_FPR5(\thread) + swc1 $f6, THREAD_FPR6(\thread) + swc1 $f7, THREAD_FPR7(\thread) + swc1 $f8, THREAD_FPR8(\thread) + swc1 $f9, THREAD_FPR9(\thread) + swc1 $f10, THREAD_FPR10(\thread) + swc1 $f11, THREAD_FPR11(\thread) + swc1 $f12, THREAD_FPR12(\thread) + swc1 $f13, THREAD_FPR13(\thread) + swc1 $f14, THREAD_FPR14(\thread) + swc1 $f15, THREAD_FPR15(\thread) + swc1 $f16, THREAD_FPR16(\thread) + swc1 $f17, THREAD_FPR17(\thread) + swc1 $f18, THREAD_FPR18(\thread) + swc1 $f19, THREAD_FPR19(\thread) + swc1 $f20, THREAD_FPR20(\thread) + swc1 $f21, THREAD_FPR21(\thread) + swc1 $f22, THREAD_FPR22(\thread) + swc1 $f23, THREAD_FPR23(\thread) + swc1 $f24, THREAD_FPR24(\thread) + swc1 $f25, THREAD_FPR25(\thread) + swc1 $f26, THREAD_FPR26(\thread) + swc1 $f27, THREAD_FPR27(\thread) + swc1 $f28, THREAD_FPR28(\thread) + swc1 $f29, THREAD_FPR29(\thread) + swc1 $f30, THREAD_FPR30(\thread) + swc1 $f31, THREAD_FPR31(\thread) + sw \tmp, THREAD_FCR31(\thread) + .endm + + .macro fpu_restore_double thread status tmp=t0 + lw \tmp, THREAD_FCR31(\thread) + ldc1 $f0, THREAD_FPR0(\thread) + ldc1 $f2, THREAD_FPR2(\thread) + ldc1 $f4, THREAD_FPR4(\thread) + ldc1 $f6, THREAD_FPR6(\thread) + ldc1 $f8, THREAD_FPR8(\thread) + ldc1 $f10, THREAD_FPR10(\thread) + ldc1 $f12, THREAD_FPR12(\thread) + ldc1 $f14, THREAD_FPR14(\thread) + ldc1 $f16, THREAD_FPR16(\thread) + ldc1 $f18, THREAD_FPR18(\thread) + ldc1 $f20, THREAD_FPR20(\thread) + ldc1 $f22, THREAD_FPR22(\thread) + ldc1 $f24, THREAD_FPR24(\thread) + ldc1 $f26, THREAD_FPR26(\thread) + ldc1 $f28, THREAD_FPR28(\thread) + ldc1 $f30, THREAD_FPR30(\thread) + ctc1 \tmp, fcr31 + .endm + + .macro fpu_restore_single thread tmp=t0 + lw \tmp, THREAD_FCR31(\thread) + lwc1 $f0, THREAD_FPR0(\thread) + lwc1 $f1, THREAD_FPR1(\thread) + lwc1 $f2, THREAD_FPR2(\thread) + lwc1 $f3, THREAD_FPR3(\thread) + lwc1 $f4, THREAD_FPR4(\thread) + lwc1 $f5, THREAD_FPR5(\thread) + lwc1 $f6, THREAD_FPR6(\thread) + lwc1 $f7, THREAD_FPR7(\thread) + lwc1 $f8, THREAD_FPR8(\thread) + lwc1 $f9, THREAD_FPR9(\thread) + lwc1 $f10, THREAD_FPR10(\thread) + lwc1 $f11, THREAD_FPR11(\thread) + lwc1 $f12, THREAD_FPR12(\thread) + lwc1 $f13, THREAD_FPR13(\thread) + lwc1 $f14, THREAD_FPR14(\thread) + lwc1 $f15, THREAD_FPR15(\thread) + lwc1 $f16, THREAD_FPR16(\thread) + lwc1 $f17, THREAD_FPR17(\thread) + lwc1 $f18, THREAD_FPR18(\thread) + lwc1 $f19, THREAD_FPR19(\thread) + lwc1 $f20, THREAD_FPR20(\thread) + lwc1 $f21, THREAD_FPR21(\thread) + lwc1 $f22, THREAD_FPR22(\thread) + lwc1 $f23, THREAD_FPR23(\thread) + lwc1 $f24, THREAD_FPR24(\thread) + lwc1 $f25, THREAD_FPR25(\thread) + lwc1 $f26, THREAD_FPR26(\thread) + lwc1 $f27, THREAD_FPR27(\thread) + lwc1 $f28, THREAD_FPR28(\thread) + lwc1 $f29, THREAD_FPR29(\thread) + lwc1 $f30, THREAD_FPR30(\thread) + lwc1 $f31, THREAD_FPR31(\thread) + ctc1 \tmp, fcr31 + .endm + + .macro cpu_save_nonscratch thread + LONG_S s0, THREAD_REG16(\thread) + LONG_S s1, THREAD_REG17(\thread) + LONG_S s2, THREAD_REG18(\thread) + LONG_S s3, THREAD_REG19(\thread) + LONG_S s4, THREAD_REG20(\thread) + LONG_S s5, THREAD_REG21(\thread) + LONG_S s6, THREAD_REG22(\thread) + LONG_S s7, THREAD_REG23(\thread) + LONG_S sp, THREAD_REG29(\thread) + LONG_S fp, THREAD_REG30(\thread) + .endm + + .macro cpu_restore_nonscratch thread + LONG_L s0, THREAD_REG16(\thread) + LONG_L s1, THREAD_REG17(\thread) + LONG_L s2, THREAD_REG18(\thread) + LONG_L s3, THREAD_REG19(\thread) + LONG_L s4, THREAD_REG20(\thread) + LONG_L s5, THREAD_REG21(\thread) + LONG_L s6, THREAD_REG22(\thread) + LONG_L s7, THREAD_REG23(\thread) + LONG_L sp, THREAD_REG29(\thread) + LONG_L fp, THREAD_REG30(\thread) + LONG_L ra, THREAD_REG31(\thread) + .endm + +#endif /* _ASM_ASMMACRO_32_H */ diff --git a/arch/mips/include/asm/asmmacro-64.h b/arch/mips/include/asm/asmmacro-64.h new file mode 100644 index 000000000000..225feefcb25d --- /dev/null +++ b/arch/mips/include/asm/asmmacro-64.h @@ -0,0 +1,139 @@ +/* + * asmmacro.h: Assembler macros to make things easier to read. + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1998, 1999 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_ASMMACRO_64_H +#define _ASM_ASMMACRO_64_H + +#include +#include +#include +#include + + .macro fpu_save_16even thread tmp=t0 + cfc1 \tmp, fcr31 + sdc1 $f0, THREAD_FPR0(\thread) + sdc1 $f2, THREAD_FPR2(\thread) + sdc1 $f4, THREAD_FPR4(\thread) + sdc1 $f6, THREAD_FPR6(\thread) + sdc1 $f8, THREAD_FPR8(\thread) + sdc1 $f10, THREAD_FPR10(\thread) + sdc1 $f12, THREAD_FPR12(\thread) + sdc1 $f14, THREAD_FPR14(\thread) + sdc1 $f16, THREAD_FPR16(\thread) + sdc1 $f18, THREAD_FPR18(\thread) + sdc1 $f20, THREAD_FPR20(\thread) + sdc1 $f22, THREAD_FPR22(\thread) + sdc1 $f24, THREAD_FPR24(\thread) + sdc1 $f26, THREAD_FPR26(\thread) + sdc1 $f28, THREAD_FPR28(\thread) + sdc1 $f30, THREAD_FPR30(\thread) + sw \tmp, THREAD_FCR31(\thread) + .endm + + .macro fpu_save_16odd thread + sdc1 $f1, THREAD_FPR1(\thread) + sdc1 $f3, THREAD_FPR3(\thread) + sdc1 $f5, THREAD_FPR5(\thread) + sdc1 $f7, THREAD_FPR7(\thread) + sdc1 $f9, THREAD_FPR9(\thread) + sdc1 $f11, THREAD_FPR11(\thread) + sdc1 $f13, THREAD_FPR13(\thread) + sdc1 $f15, THREAD_FPR15(\thread) + sdc1 $f17, THREAD_FPR17(\thread) + sdc1 $f19, THREAD_FPR19(\thread) + sdc1 $f21, THREAD_FPR21(\thread) + sdc1 $f23, THREAD_FPR23(\thread) + sdc1 $f25, THREAD_FPR25(\thread) + sdc1 $f27, THREAD_FPR27(\thread) + sdc1 $f29, THREAD_FPR29(\thread) + sdc1 $f31, THREAD_FPR31(\thread) + .endm + + .macro fpu_save_double thread status tmp + sll \tmp, \status, 5 + bgez \tmp, 2f + fpu_save_16odd \thread +2: + fpu_save_16even \thread \tmp + .endm + + .macro fpu_restore_16even thread tmp=t0 + lw \tmp, THREAD_FCR31(\thread) + ldc1 $f0, THREAD_FPR0(\thread) + ldc1 $f2, THREAD_FPR2(\thread) + ldc1 $f4, THREAD_FPR4(\thread) + ldc1 $f6, THREAD_FPR6(\thread) + ldc1 $f8, THREAD_FPR8(\thread) + ldc1 $f10, THREAD_FPR10(\thread) + ldc1 $f12, THREAD_FPR12(\thread) + ldc1 $f14, THREAD_FPR14(\thread) + ldc1 $f16, THREAD_FPR16(\thread) + ldc1 $f18, THREAD_FPR18(\thread) + ldc1 $f20, THREAD_FPR20(\thread) + ldc1 $f22, THREAD_FPR22(\thread) + ldc1 $f24, THREAD_FPR24(\thread) + ldc1 $f26, THREAD_FPR26(\thread) + ldc1 $f28, THREAD_FPR28(\thread) + ldc1 $f30, THREAD_FPR30(\thread) + ctc1 \tmp, fcr31 + .endm + + .macro fpu_restore_16odd thread + ldc1 $f1, THREAD_FPR1(\thread) + ldc1 $f3, THREAD_FPR3(\thread) + ldc1 $f5, THREAD_FPR5(\thread) + ldc1 $f7, THREAD_FPR7(\thread) + ldc1 $f9, THREAD_FPR9(\thread) + ldc1 $f11, THREAD_FPR11(\thread) + ldc1 $f13, THREAD_FPR13(\thread) + ldc1 $f15, THREAD_FPR15(\thread) + ldc1 $f17, THREAD_FPR17(\thread) + ldc1 $f19, THREAD_FPR19(\thread) + ldc1 $f21, THREAD_FPR21(\thread) + ldc1 $f23, THREAD_FPR23(\thread) + ldc1 $f25, THREAD_FPR25(\thread) + ldc1 $f27, THREAD_FPR27(\thread) + ldc1 $f29, THREAD_FPR29(\thread) + ldc1 $f31, THREAD_FPR31(\thread) + .endm + + .macro fpu_restore_double thread status tmp + sll \tmp, \status, 5 + bgez \tmp, 1f # 16 register mode? + + fpu_restore_16odd \thread +1: fpu_restore_16even \thread \tmp + .endm + + .macro cpu_save_nonscratch thread + LONG_S s0, THREAD_REG16(\thread) + LONG_S s1, THREAD_REG17(\thread) + LONG_S s2, THREAD_REG18(\thread) + LONG_S s3, THREAD_REG19(\thread) + LONG_S s4, THREAD_REG20(\thread) + LONG_S s5, THREAD_REG21(\thread) + LONG_S s6, THREAD_REG22(\thread) + LONG_S s7, THREAD_REG23(\thread) + LONG_S sp, THREAD_REG29(\thread) + LONG_S fp, THREAD_REG30(\thread) + .endm + + .macro cpu_restore_nonscratch thread + LONG_L s0, THREAD_REG16(\thread) + LONG_L s1, THREAD_REG17(\thread) + LONG_L s2, THREAD_REG18(\thread) + LONG_L s3, THREAD_REG19(\thread) + LONG_L s4, THREAD_REG20(\thread) + LONG_L s5, THREAD_REG21(\thread) + LONG_L s6, THREAD_REG22(\thread) + LONG_L s7, THREAD_REG23(\thread) + LONG_L sp, THREAD_REG29(\thread) + LONG_L fp, THREAD_REG30(\thread) + LONG_L ra, THREAD_REG31(\thread) + .endm + +#endif /* _ASM_ASMMACRO_64_H */ diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h new file mode 100644 index 000000000000..7a881755800f --- /dev/null +++ b/arch/mips/include/asm/asmmacro.h @@ -0,0 +1,82 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Ralf Baechle + */ +#ifndef _ASM_ASMMACRO_H +#define _ASM_ASMMACRO_H + +#include + +#ifdef CONFIG_32BIT +#include +#endif +#ifdef CONFIG_64BIT +#include +#endif +#ifdef CONFIG_MIPS_MT_SMTC +#include +#endif + +#ifdef CONFIG_MIPS_MT_SMTC + .macro local_irq_enable reg=t0 + mfc0 \reg, CP0_TCSTATUS + ori \reg, \reg, TCSTATUS_IXMT + xori \reg, \reg, TCSTATUS_IXMT + mtc0 \reg, CP0_TCSTATUS + _ehb + .endm + + .macro local_irq_disable reg=t0 + mfc0 \reg, CP0_TCSTATUS + ori \reg, \reg, TCSTATUS_IXMT + mtc0 \reg, CP0_TCSTATUS + _ehb + .endm +#else + .macro local_irq_enable reg=t0 + mfc0 \reg, CP0_STATUS + ori \reg, \reg, 1 + mtc0 \reg, CP0_STATUS + irq_enable_hazard + .endm + + .macro local_irq_disable reg=t0 + mfc0 \reg, CP0_STATUS + ori \reg, \reg, 1 + xori \reg, \reg, 1 + mtc0 \reg, CP0_STATUS + irq_disable_hazard + .endm +#endif /* CONFIG_MIPS_MT_SMTC */ + +/* + * Temporary until all gas have MT ASE support + */ + .macro DMT reg=0 + .word 0x41600bc1 | (\reg << 16) + .endm + + .macro EMT reg=0 + .word 0x41600be1 | (\reg << 16) + .endm + + .macro DVPE reg=0 + .word 0x41600001 | (\reg << 16) + .endm + + .macro EVPE reg=0 + .word 0x41600021 | (\reg << 16) + .endm + + .macro MFTR rt=0, rd=0, u=0, sel=0 + .word 0x41000000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel) + .endm + + .macro MTTR rt=0, rd=0, u=0, sel=0 + .word 0x41800000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel) + .endm + +#endif /* _ASM_ASMMACRO_H */ diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h new file mode 100644 index 000000000000..1232be3885b0 --- /dev/null +++ b/arch/mips/include/asm/atomic.h @@ -0,0 +1,801 @@ +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + * + * But use these as seldom as possible since they are much more slower + * than regular operations. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 97, 99, 2000, 03, 04, 06 by Ralf Baechle + */ +#ifndef _ASM_ATOMIC_H +#define _ASM_ATOMIC_H + +#include +#include +#include +#include +#include + +typedef struct { volatile int counter; } atomic_t; + +#define ATOMIC_INIT(i) { (i) } + +/* + * atomic_read - read atomic variable + * @v: pointer of type atomic_t + * + * Atomically reads the value of @v. + */ +#define atomic_read(v) ((v)->counter) + +/* + * atomic_set - set atomic variable + * @v: pointer of type atomic_t + * @i: required value + * + * Atomically sets the value of @v to @i. + */ +#define atomic_set(v, i) ((v)->counter = (i)) + +/* + * atomic_add - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v. + */ +static __inline__ void atomic_add(int i, atomic_t * v) +{ + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %0, %1 # atomic_add \n" + " addu %0, %2 \n" + " sc %0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %0, %1 # atomic_add \n" + " addu %0, %2 \n" + " sc %0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + v->counter += i; + raw_local_irq_restore(flags); + } +} + +/* + * atomic_sub - subtract the atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v. + */ +static __inline__ void atomic_sub(int i, atomic_t * v) +{ + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %0, %1 # atomic_sub \n" + " subu %0, %2 \n" + " sc %0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %0, %1 # atomic_sub \n" + " subu %0, %2 \n" + " sc %0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + v->counter -= i; + raw_local_irq_restore(flags); + } +} + +/* + * Same as above, but return the result value + */ +static __inline__ int atomic_add_return(int i, atomic_t * v) +{ + unsigned long result; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %1, %2 # atomic_add_return \n" + " addu %0, %1, %3 \n" + " sc %0, %2 \n" + " beqzl %0, 1b \n" + " addu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %1, %2 # atomic_add_return \n" + " addu %0, %1, %3 \n" + " sc %0, %2 \n" + " beqz %0, 2f \n" + " addu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + result = v->counter; + result += i; + v->counter = result; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return result; +} + +static __inline__ int atomic_sub_return(int i, atomic_t * v) +{ + unsigned long result; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %1, %2 # atomic_sub_return \n" + " subu %0, %1, %3 \n" + " sc %0, %2 \n" + " beqzl %0, 1b \n" + " subu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %1, %2 # atomic_sub_return \n" + " subu %0, %1, %3 \n" + " sc %0, %2 \n" + " beqz %0, 2f \n" + " subu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + result = v->counter; + result -= i; + v->counter = result; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return result; +} + +/* + * atomic_sub_if_positive - conditionally subtract integer from atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically test @v and subtract @i if @v is greater or equal than @i. + * The function returns the old value of @v minus @i. + */ +static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) +{ + unsigned long result; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %1, %2 # atomic_sub_if_positive\n" + " subu %0, %1, %3 \n" + " bltz %0, 1f \n" + " sc %0, %2 \n" + " .set noreorder \n" + " beqzl %0, 1b \n" + " subu %0, %1, %3 \n" + " .set reorder \n" + "1: \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %1, %2 # atomic_sub_if_positive\n" + " subu %0, %1, %3 \n" + " bltz %0, 1f \n" + " sc %0, %2 \n" + " .set noreorder \n" + " beqz %0, 2f \n" + " subu %0, %1, %3 \n" + " .set reorder \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + "1: \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + result = v->counter; + result -= i; + if (result >= 0) + v->counter = result; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return result; +} + +#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), (new))) + +/** + * atomic_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#define atomic_dec_return(v) atomic_sub_return(1, (v)) +#define atomic_inc_return(v) atomic_add_return(1, (v)) + +/* + * atomic_sub_and_test - subtract value from variable and test result + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and returns + * true if the result is zero, or false for all + * other cases. + */ +#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +/* + * atomic_dec_and_test - decrement by 1 and test + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1 and + * returns true if the result is 0, or false for all other + * cases. + */ +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) + +/* + * atomic_dec_if_positive - decrement by 1 if old value positive + * @v: pointer of type atomic_t + */ +#define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v) + +/* + * atomic_inc - increment atomic variable + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1. + */ +#define atomic_inc(v) atomic_add(1, (v)) + +/* + * atomic_dec - decrement and test + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1. + */ +#define atomic_dec(v) atomic_sub(1, (v)) + +/* + * atomic_add_negative - add and test if negative + * @v: pointer of type atomic_t + * @i: integer value to add + * + * Atomically adds @i to @v and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +#define atomic_add_negative(i, v) (atomic_add_return(i, (v)) < 0) + +#ifdef CONFIG_64BIT + +typedef struct { volatile long counter; } atomic64_t; + +#define ATOMIC64_INIT(i) { (i) } + +/* + * atomic64_read - read atomic variable + * @v: pointer of type atomic64_t + * + */ +#define atomic64_read(v) ((v)->counter) + +/* + * atomic64_set - set atomic variable + * @v: pointer of type atomic64_t + * @i: required value + */ +#define atomic64_set(v, i) ((v)->counter = (i)) + +/* + * atomic64_add - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic64_t + * + * Atomically adds @i to @v. + */ +static __inline__ void atomic64_add(long i, atomic64_t * v) +{ + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %0, %1 # atomic64_add \n" + " addu %0, %2 \n" + " scd %0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %0, %1 # atomic64_add \n" + " addu %0, %2 \n" + " scd %0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + v->counter += i; + raw_local_irq_restore(flags); + } +} + +/* + * atomic64_sub - subtract the atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic64_t + * + * Atomically subtracts @i from @v. + */ +static __inline__ void atomic64_sub(long i, atomic64_t * v) +{ + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %0, %1 # atomic64_sub \n" + " subu %0, %2 \n" + " scd %0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %0, %1 # atomic64_sub \n" + " subu %0, %2 \n" + " scd %0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter)); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + v->counter -= i; + raw_local_irq_restore(flags); + } +} + +/* + * Same as above, but return the result value + */ +static __inline__ long atomic64_add_return(long i, atomic64_t * v) +{ + unsigned long result; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %1, %2 # atomic64_add_return \n" + " addu %0, %1, %3 \n" + " scd %0, %2 \n" + " beqzl %0, 1b \n" + " addu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %1, %2 # atomic64_add_return \n" + " addu %0, %1, %3 \n" + " scd %0, %2 \n" + " beqz %0, 2f \n" + " addu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + result = v->counter; + result += i; + v->counter = result; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return result; +} + +static __inline__ long atomic64_sub_return(long i, atomic64_t * v) +{ + unsigned long result; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %1, %2 # atomic64_sub_return \n" + " subu %0, %1, %3 \n" + " scd %0, %2 \n" + " beqzl %0, 1b \n" + " subu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %1, %2 # atomic64_sub_return \n" + " subu %0, %1, %3 \n" + " scd %0, %2 \n" + " beqz %0, 2f \n" + " subu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + result = v->counter; + result -= i; + v->counter = result; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return result; +} + +/* + * atomic64_sub_if_positive - conditionally subtract integer from atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic64_t + * + * Atomically test @v and subtract @i if @v is greater or equal than @i. + * The function returns the old value of @v minus @i. + */ +static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) +{ + unsigned long result; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %1, %2 # atomic64_sub_if_positive\n" + " dsubu %0, %1, %3 \n" + " bltz %0, 1f \n" + " scd %0, %2 \n" + " .set noreorder \n" + " beqzl %0, 1b \n" + " dsubu %0, %1, %3 \n" + " .set reorder \n" + "1: \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %1, %2 # atomic64_sub_if_positive\n" + " dsubu %0, %1, %3 \n" + " bltz %0, 1f \n" + " scd %0, %2 \n" + " .set noreorder \n" + " beqz %0, 2f \n" + " dsubu %0, %1, %3 \n" + " .set reorder \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + "1: \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (v->counter) + : "Ir" (i), "m" (v->counter) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + result = v->counter; + result -= i; + if (result >= 0) + v->counter = result; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return result; +} + +#define atomic64_cmpxchg(v, o, n) \ + ((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n))) +#define atomic64_xchg(v, new) (xchg(&((v)->counter), (new))) + +/** + * atomic64_add_unless - add unless the number is a given value + * @v: pointer of type atomic64_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns non-zero if @v was not @u, and zero otherwise. + */ +static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) +{ + long c, old; + c = atomic64_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic64_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) + +#define atomic64_dec_return(v) atomic64_sub_return(1, (v)) +#define atomic64_inc_return(v) atomic64_add_return(1, (v)) + +/* + * atomic64_sub_and_test - subtract value from variable and test result + * @i: integer value to subtract + * @v: pointer of type atomic64_t + * + * Atomically subtracts @i from @v and returns + * true if the result is zero, or false for all + * other cases. + */ +#define atomic64_sub_and_test(i, v) (atomic64_sub_return((i), (v)) == 0) + +/* + * atomic64_inc_and_test - increment and test + * @v: pointer of type atomic64_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) + +/* + * atomic64_dec_and_test - decrement by 1 and test + * @v: pointer of type atomic64_t + * + * Atomically decrements @v by 1 and + * returns true if the result is 0, or false for all other + * cases. + */ +#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0) + +/* + * atomic64_dec_if_positive - decrement by 1 if old value positive + * @v: pointer of type atomic64_t + */ +#define atomic64_dec_if_positive(v) atomic64_sub_if_positive(1, v) + +/* + * atomic64_inc - increment atomic variable + * @v: pointer of type atomic64_t + * + * Atomically increments @v by 1. + */ +#define atomic64_inc(v) atomic64_add(1, (v)) + +/* + * atomic64_dec - decrement and test + * @v: pointer of type atomic64_t + * + * Atomically decrements @v by 1. + */ +#define atomic64_dec(v) atomic64_sub(1, (v)) + +/* + * atomic64_add_negative - add and test if negative + * @v: pointer of type atomic64_t + * @i: integer value to add + * + * Atomically adds @i to @v and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +#define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0) + +#endif /* CONFIG_64BIT */ + +/* + * atomic*_return operations are serializing but not the non-*_return + * versions. + */ +#define smp_mb__before_atomic_dec() smp_llsc_mb() +#define smp_mb__after_atomic_dec() smp_llsc_mb() +#define smp_mb__before_atomic_inc() smp_llsc_mb() +#define smp_mb__after_atomic_inc() smp_llsc_mb() + +#include + +#endif /* _ASM_ATOMIC_H */ diff --git a/arch/mips/include/asm/auxvec.h b/arch/mips/include/asm/auxvec.h new file mode 100644 index 000000000000..7cf7f2d21943 --- /dev/null +++ b/arch/mips/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef _ASM_AUXVEC_H +#define _ASM_AUXVEC_H + +#endif /* _ASM_AUXVEC_H */ diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h new file mode 100644 index 000000000000..8e9ac313ca3b --- /dev/null +++ b/arch/mips/include/asm/barrier.h @@ -0,0 +1,155 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_BARRIER_H +#define __ASM_BARRIER_H + +/* + * read_barrier_depends - Flush all pending reads that subsequents reads + * depend on. + * + * No data-dependent reads from memory-like regions are ever reordered + * over this barrier. All reads preceding this primitive are guaranteed + * to access memory (but not necessarily other CPUs' caches) before any + * reads following this primitive that depend on the data return by + * any of the preceding reads. This primitive is much lighter weight than + * rmb() on most CPUs, and is never heavier weight than is + * rmb(). + * + * These ordering constraints are respected by both the local CPU + * and the compiler. + * + * Ordering is not guaranteed by anything other than these primitives, + * not even by data dependencies. See the documentation for + * memory_barrier() for examples and URLs to more information. + * + * For example, the following code would force ordering (the initial + * value of "a" is zero, "b" is one, and "p" is "&a"): + * + * + * CPU 0 CPU 1 + * + * b = 2; + * memory_barrier(); + * p = &b; q = p; + * read_barrier_depends(); + * d = *q; + * + * + * because the read of "*q" depends on the read of "p" and these + * two reads are separated by a read_barrier_depends(). However, + * the following code, with the same initial values for "a" and "b": + * + * + * CPU 0 CPU 1 + * + * a = 2; + * memory_barrier(); + * b = 3; y = b; + * read_barrier_depends(); + * x = a; + * + * + * does not enforce ordering, since there is no data dependency between + * the read of "a" and the read of "b". Therefore, on some CPUs, such + * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() + * in cases like this where there are no data dependencies. + */ + +#define read_barrier_depends() do { } while(0) +#define smp_read_barrier_depends() do { } while(0) + +#ifdef CONFIG_CPU_HAS_SYNC +#define __sync() \ + __asm__ __volatile__( \ + ".set push\n\t" \ + ".set noreorder\n\t" \ + ".set mips2\n\t" \ + "sync\n\t" \ + ".set pop" \ + : /* no output */ \ + : /* no input */ \ + : "memory") +#else +#define __sync() do { } while(0) +#endif + +#define __fast_iob() \ + __asm__ __volatile__( \ + ".set push\n\t" \ + ".set noreorder\n\t" \ + "lw $0,%0\n\t" \ + "nop\n\t" \ + ".set pop" \ + : /* no output */ \ + : "m" (*(int *)CKSEG1) \ + : "memory") + +#define fast_wmb() __sync() +#define fast_rmb() __sync() +#define fast_mb() __sync() +#ifdef CONFIG_SGI_IP28 +#define fast_iob() \ + __asm__ __volatile__( \ + ".set push\n\t" \ + ".set noreorder\n\t" \ + "lw $0,%0\n\t" \ + "sync\n\t" \ + "lw $0,%0\n\t" \ + ".set pop" \ + : /* no output */ \ + : "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \ + : "memory") +#else +#define fast_iob() \ + do { \ + __sync(); \ + __fast_iob(); \ + } while (0) +#endif + +#ifdef CONFIG_CPU_HAS_WB + +#include + +#define wmb() fast_wmb() +#define rmb() fast_rmb() +#define mb() wbflush() +#define iob() wbflush() + +#else /* !CONFIG_CPU_HAS_WB */ + +#define wmb() fast_wmb() +#define rmb() fast_rmb() +#define mb() fast_mb() +#define iob() fast_iob() + +#endif /* !CONFIG_CPU_HAS_WB */ + +#if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP) +#define __WEAK_ORDERING_MB " sync \n" +#else +#define __WEAK_ORDERING_MB " \n" +#endif +#if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP) +#define __WEAK_LLSC_MB " sync \n" +#else +#define __WEAK_LLSC_MB " \n" +#endif + +#define smp_mb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") +#define smp_rmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") +#define smp_wmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") + +#define set_mb(var, value) \ + do { var = value; smp_mb(); } while (0) + +#define smp_llsc_mb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") +#define smp_llsc_rmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") +#define smp_llsc_wmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") + +#endif /* __ASM_BARRIER_H */ diff --git a/arch/mips/include/asm/bcache.h b/arch/mips/include/asm/bcache.h new file mode 100644 index 000000000000..0ba9d6ef76a7 --- /dev/null +++ b/arch/mips/include/asm/bcache.h @@ -0,0 +1,60 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1997, 1999 by Ralf Baechle + * Copyright (c) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_BCACHE_H +#define _ASM_BCACHE_H + + +/* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent, + chipset implemented caches. On machines with other CPUs the CPU does the + cache thing itself. */ +struct bcache_ops { + void (*bc_enable)(void); + void (*bc_disable)(void); + void (*bc_wback_inv)(unsigned long page, unsigned long size); + void (*bc_inv)(unsigned long page, unsigned long size); +}; + +extern void indy_sc_init(void); + +#ifdef CONFIG_BOARD_SCACHE + +extern struct bcache_ops *bcops; + +static inline void bc_enable(void) +{ + bcops->bc_enable(); +} + +static inline void bc_disable(void) +{ + bcops->bc_disable(); +} + +static inline void bc_wback_inv(unsigned long page, unsigned long size) +{ + bcops->bc_wback_inv(page, size); +} + +static inline void bc_inv(unsigned long page, unsigned long size) +{ + bcops->bc_inv(page, size); +} + +#else /* !defined(CONFIG_BOARD_SCACHE) */ + +/* Not R4000 / R4400 / R4600 / R5000. */ + +#define bc_enable() do { } while (0) +#define bc_disable() do { } while (0) +#define bc_wback_inv(page, size) do { } while (0) +#define bc_inv(page, size) do { } while (0) + +#endif /* !defined(CONFIG_BOARD_SCACHE) */ + +#endif /* _ASM_BCACHE_H */ diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h new file mode 100644 index 000000000000..49df8c4c9d25 --- /dev/null +++ b/arch/mips/include/asm/bitops.h @@ -0,0 +1,672 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1994 - 1997, 99, 2000, 06, 07 Ralf Baechle (ralf@linux-mips.org) + * Copyright (c) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_BITOPS_H +#define _ASM_BITOPS_H + +#ifndef _LINUX_BITOPS_H +#error only can be included directly +#endif + +#include +#include +#include +#include +#include +#include /* sigh ... */ +#include +#include +#include + +#if _MIPS_SZLONG == 32 +#define SZLONG_LOG 5 +#define SZLONG_MASK 31UL +#define __LL "ll " +#define __SC "sc " +#define __INS "ins " +#define __EXT "ext " +#elif _MIPS_SZLONG == 64 +#define SZLONG_LOG 6 +#define SZLONG_MASK 63UL +#define __LL "lld " +#define __SC "scd " +#define __INS "dins " +#define __EXT "dext " +#endif + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() smp_llsc_mb() +#define smp_mb__after_clear_bit() smp_llsc_mb() + +/* + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void set_bit(unsigned long nr, volatile unsigned long *addr) +{ + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned short bit = nr & SZLONG_MASK; + unsigned long temp; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # set_bit \n" + " or %0, %2 \n" + " " __SC "%0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m) + : "ir" (1UL << bit), "m" (*m)); +#ifdef CONFIG_CPU_MIPSR2 + } else if (__builtin_constant_p(bit)) { + __asm__ __volatile__( + "1: " __LL "%0, %1 # set_bit \n" + " " __INS "%0, %4, %2, 1 \n" + " " __SC "%0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + : "=&r" (temp), "=m" (*m) + : "ir" (bit), "m" (*m), "r" (~0)); +#endif /* CONFIG_CPU_MIPSR2 */ + } else if (cpu_has_llsc) { + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # set_bit \n" + " or %0, %2 \n" + " " __SC "%0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m) + : "ir" (1UL << bit), "m" (*m)); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + *a |= mask; + raw_local_irq_restore(flags); + } +} + +/* + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) +{ + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned short bit = nr & SZLONG_MASK; + unsigned long temp; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # clear_bit \n" + " and %0, %2 \n" + " " __SC "%0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m) + : "ir" (~(1UL << bit)), "m" (*m)); +#ifdef CONFIG_CPU_MIPSR2 + } else if (__builtin_constant_p(bit)) { + __asm__ __volatile__( + "1: " __LL "%0, %1 # clear_bit \n" + " " __INS "%0, $0, %2, 1 \n" + " " __SC "%0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + : "=&r" (temp), "=m" (*m) + : "ir" (bit), "m" (*m)); +#endif /* CONFIG_CPU_MIPSR2 */ + } else if (cpu_has_llsc) { + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # clear_bit \n" + " and %0, %2 \n" + " " __SC "%0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m) + : "ir" (~(1UL << bit)), "m" (*m)); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + *a &= ~mask; + raw_local_irq_restore(flags); + } +} + +/* + * clear_bit_unlock - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and implies release semantics before the memory + * operation. It can be used for an unlock. + */ +static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *addr) +{ + smp_mb__before_clear_bit(); + clear_bit(nr, addr); +} + +/* + * change_bit - Toggle a bit in memory + * @nr: Bit to change + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void change_bit(unsigned long nr, volatile unsigned long *addr) +{ + unsigned short bit = nr & SZLONG_MASK; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # change_bit \n" + " xor %0, %2 \n" + " " __SC "%0, %1 \n" + " beqzl %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m) + : "ir" (1UL << bit), "m" (*m)); + } else if (cpu_has_llsc) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # change_bit \n" + " xor %0, %2 \n" + " " __SC "%0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m) + : "ir" (1UL << bit), "m" (*m)); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + *a ^= mask; + raw_local_irq_restore(flags); + } +} + +/* + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_set_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned short bit = nr & SZLONG_MASK; + unsigned long res; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_set_bit \n" + " or %2, %0, %3 \n" + " " __SC "%2, %1 \n" + " beqzl %2, 1b \n" + " and %2, %0, %3 \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_set_bit \n" + " or %2, %0, %3 \n" + " " __SC "%2, %1 \n" + " beqz %2, 2f \n" + " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" + " .set pop \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + res = (mask & *a); + *a |= mask; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return res != 0; +} + +/* + * test_and_set_bit_lock - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and implies acquire ordering semantics + * after the memory operation. + */ +static inline int test_and_set_bit_lock(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned short bit = nr & SZLONG_MASK; + unsigned long res; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_set_bit \n" + " or %2, %0, %3 \n" + " " __SC "%2, %1 \n" + " beqzl %2, 1b \n" + " and %2, %0, %3 \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_set_bit \n" + " or %2, %0, %3 \n" + " " __SC "%2, %1 \n" + " beqz %2, 2f \n" + " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" + " .set pop \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + res = (mask & *a); + *a |= mask; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return res != 0; +} +/* + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to clear + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_clear_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned short bit = nr & SZLONG_MASK; + unsigned long res; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_clear_bit \n" + " or %2, %0, %3 \n" + " xor %2, %3 \n" + " " __SC "%2, %1 \n" + " beqzl %2, 1b \n" + " and %2, %0, %3 \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); +#ifdef CONFIG_CPU_MIPSR2 + } else if (__builtin_constant_p(nr)) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + "1: " __LL "%0, %1 # test_and_clear_bit \n" + " " __EXT "%2, %0, %3, 1 \n" + " " __INS "%0, $0, %3, 1 \n" + " " __SC "%0, %1 \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "ir" (bit), "m" (*m) + : "memory"); +#endif + } else if (cpu_has_llsc) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_clear_bit \n" + " or %2, %0, %3 \n" + " xor %2, %3 \n" + " " __SC "%2, %1 \n" + " beqz %2, 2f \n" + " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" + " .set pop \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + res = (mask & *a); + *a &= ~mask; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return res != 0; +} + +/* + * test_and_change_bit - Change a bit and return its old value + * @nr: Bit to change + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_change_bit(unsigned long nr, + volatile unsigned long *addr) +{ + unsigned short bit = nr & SZLONG_MASK; + unsigned long res; + + smp_llsc_mb(); + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_change_bit \n" + " xor %2, %0, %3 \n" + " " __SC "%2, %1 \n" + " beqzl %2, 1b \n" + " and %2, %0, %3 \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); + unsigned long temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips3 \n" + "1: " __LL "%0, %1 # test_and_change_bit \n" + " xor %2, %0, %3 \n" + " " __SC "\t%2, %1 \n" + " beqz %2, 2f \n" + " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" + " .set pop \n" + : "=&r" (temp), "=m" (*m), "=&r" (res) + : "r" (1UL << bit), "m" (*m) + : "memory"); + } else { + volatile unsigned long *a = addr; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + res = (mask & *a); + *a ^= mask; + raw_local_irq_restore(flags); + } + + smp_llsc_mb(); + + return res != 0; +} + +#include + +/* + * __clear_bit_unlock - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * __clear_bit() is non-atomic and implies release semantics before the memory + * operation. It can be used for an unlock if no other CPUs can concurrently + * modify other bits in the word. + */ +static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *addr) +{ + smp_mb(); + __clear_bit(nr, addr); +} + +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + +/* + * Return the bit position (0..63) of the most significant 1 bit in a word + * Returns -1 if no 1 bit exists + */ +static inline unsigned long __fls(unsigned long x) +{ + int lz; + + if (sizeof(x) == 4) { + __asm__( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (lz) + : "r" (x)); + + return 31 - lz; + } + + BUG_ON(sizeof(x) != 8); + + __asm__( + " .set push \n" + " .set mips64 \n" + " dclz %0, %1 \n" + " .set pop \n" + : "=r" (lz) + : "r" (x)); + + return 63 - lz; +} + +/* + * __ffs - find first bit in word. + * @word: The word to search + * + * Returns 0..SZLONG-1 + * Undefined if no bit exists, so code should check against 0 first. + */ +static inline unsigned long __ffs(unsigned long word) +{ + return __fls(word & -word); +} + +/* + * fls - find last bit set. + * @word: The word to search + * + * This is defined the same way as ffs. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ +static inline int fls(int word) +{ + __asm__("clz %0, %1" : "=r" (word) : "r" (word)); + + return 32 - word; +} + +#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPS64) +static inline int fls64(__u64 word) +{ + __asm__("dclz %0, %1" : "=r" (word) : "r" (word)); + + return 64 - word; +} +#else +#include +#endif + +/* + * ffs - find first bit set. + * @word: The word to search + * + * This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static inline int ffs(int word) +{ + if (!word) + return 0; + + return fls(word & -word); +} + +#else + +#include +#include +#include +#include +#include + +#endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */ + +#include +#include + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +#endif /* __KERNEL__ */ + +#endif /* _ASM_BITOPS_H */ diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h new file mode 100644 index 000000000000..610fe3af7a03 --- /dev/null +++ b/arch/mips/include/asm/bootinfo.h @@ -0,0 +1,110 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1996, 2003 by Ralf Baechle + * Copyright (C) 1995, 1996 Andreas Busse + * Copyright (C) 1995, 1996 Stoned Elipot + * Copyright (C) 1995, 1996 Paul M. Antoine. + */ +#ifndef _ASM_BOOTINFO_H +#define _ASM_BOOTINFO_H + +#include +#include + +/* + * The MACH_ IDs are sort of equivalent to PCI product IDs. As such the + * numbers do not necessarily reflect technical relations or similarities + * between systems. + */ + +/* + * Valid machtype values for group unknown + */ +#define MACH_UNKNOWN 0 /* whatever... */ + +/* + * Valid machtype for group DEC + */ +#define MACH_DSUNKNOWN 0 +#define MACH_DS23100 1 /* DECstation 2100 or 3100 */ +#define MACH_DS5100 2 /* DECsystem 5100 */ +#define MACH_DS5000_200 3 /* DECstation 5000/200 */ +#define MACH_DS5000_1XX 4 /* DECstation 5000/120, 125, 133, 150 */ +#define MACH_DS5000_XX 5 /* DECstation 5000/20, 25, 33, 50 */ +#define MACH_DS5000_2X0 6 /* DECstation 5000/240, 260 */ +#define MACH_DS5400 7 /* DECsystem 5400 */ +#define MACH_DS5500 8 /* DECsystem 5500 */ +#define MACH_DS5800 9 /* DECsystem 5800 */ +#define MACH_DS5900 10 /* DECsystem 5900 */ + +/* + * Valid machtype for group PMC-MSP + */ +#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */ +#define MACH_MSP4200_GW 1 /* PMC-Sierra MSP4200 Gateway demo */ +#define MACH_MSP4200_FPGA 2 /* PMC-Sierra MSP4200 Emulation */ +#define MACH_MSP7120_EVAL 3 /* PMC-Sierra MSP7120 Evaluation */ +#define MACH_MSP7120_GW 4 /* PMC-Sierra MSP7120 Residential GW */ +#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ +#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ + +/* + * Valid machtype for group Mikrotik + */ +#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ +#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ + +#define CL_SIZE COMMAND_LINE_SIZE + +extern char *system_type; +const char *get_system_type(void); + +extern unsigned long mips_machtype; + +#define BOOT_MEM_MAP_MAX 32 +#define BOOT_MEM_RAM 1 +#define BOOT_MEM_ROM_DATA 2 +#define BOOT_MEM_RESERVED 3 + +/* + * A memory map that's built upon what was determined + * or specified on the command line. + */ +struct boot_mem_map { + int nr_map; + struct boot_mem_map_entry { + phys_t addr; /* start of memory segment */ + phys_t size; /* size of memory segment */ + long type; /* type of memory segment */ + } map[BOOT_MEM_MAP_MAX]; +}; + +extern struct boot_mem_map boot_mem_map; + +extern void add_memory_region(phys_t start, phys_t size, long type); + +extern void prom_init(void); +extern void prom_free_prom_memory(void); + +extern void free_init_pages(const char *what, + unsigned long begin, unsigned long end); + +/* + * Initial kernel command line, usually setup by prom_init() + */ +extern char arcs_cmdline[CL_SIZE]; + +/* + * Registers a0, a1, a3 and a4 as passed to the kernel entry by firmware + */ +extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; + +/* + * Platform memory detection hook called by setup_arch + */ +extern void plat_mem_setup(void); + +#endif /* _ASM_BOOTINFO_H */ diff --git a/arch/mips/include/asm/branch.h b/arch/mips/include/asm/branch.h new file mode 100644 index 000000000000..37c6857c8d4a --- /dev/null +++ b/arch/mips/include/asm/branch.h @@ -0,0 +1,38 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1998, 2001 by Ralf Baechle + */ +#ifndef _ASM_BRANCH_H +#define _ASM_BRANCH_H + +#include + +static inline int delay_slot(struct pt_regs *regs) +{ + return regs->cp0_cause & CAUSEF_BD; +} + +static inline unsigned long exception_epc(struct pt_regs *regs) +{ + if (!delay_slot(regs)) + return regs->cp0_epc; + + return regs->cp0_epc + 4; +} + +extern int __compute_return_epc(struct pt_regs *regs); + +static inline int compute_return_epc(struct pt_regs *regs) +{ + if (!delay_slot(regs)) { + regs->cp0_epc += 4; + return 0; + } + + return __compute_return_epc(regs); +} + +#endif /* _ASM_BRANCH_H */ diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/asm/break.h new file mode 100644 index 000000000000..25b980c91e7e --- /dev/null +++ b/arch/mips/include/asm/break.h @@ -0,0 +1,34 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 2003 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef __ASM_BREAK_H +#define __ASM_BREAK_H + +/* + * The following break codes are or were in use for specific purposes in + * other MIPS operating systems. Linux/MIPS doesn't use all of them. The + * unused ones are here as placeholders; we might encounter them in + * non-Linux/MIPS object files or make use of them in the future. + */ +#define BRK_USERBP 0 /* User bp (used by debuggers) */ +#define BRK_KERNELBP 1 /* Break in the kernel */ +#define BRK_ABORT 2 /* Sometimes used by abort(3) to SIGIOT */ +#define BRK_BD_TAKEN 3 /* For bd slot emulation - not implemented */ +#define BRK_BD_NOTTAKEN 4 /* For bd slot emulation - not implemented */ +#define BRK_SSTEPBP 5 /* User bp (used by debuggers) */ +#define BRK_OVERFLOW 6 /* Overflow check */ +#define BRK_DIVZERO 7 /* Divide by zero check */ +#define BRK_RANGE 8 /* Range error check */ +#define BRK_STACKOVERFLOW 9 /* For Ada stackchecking */ +#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */ +#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */ +#define BRK_BUG 512 /* Used by BUG() */ +#define BRK_KDB 513 /* Used in KDB_ENTER() */ +#define BRK_MULOVF 1023 /* Multiply overflow */ + +#endif /* __ASM_BREAK_H */ diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h new file mode 100644 index 000000000000..7eb63de808bc --- /dev/null +++ b/arch/mips/include/asm/bug.h @@ -0,0 +1,33 @@ +#ifndef __ASM_BUG_H +#define __ASM_BUG_H + +#include + +#ifdef CONFIG_BUG + +#include + +#define BUG() \ +do { \ + __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \ +} while (0) + +#define HAVE_ARCH_BUG + +#if (_MIPS_ISA > _MIPS_ISA_MIPS1) + +#define BUG_ON(condition) \ +do { \ + __asm__ __volatile__("tne $0, %0, %1" \ + : : "r" (condition), "i" (BRK_BUG)); \ +} while (0) + +#define HAVE_ARCH_BUG_ON + +#endif /* _MIPS_ISA > _MIPS_ISA_MIPS1 */ + +#endif + +#include + +#endif /* __ASM_BUG_H */ diff --git a/arch/mips/include/asm/bugs.h b/arch/mips/include/asm/bugs.h new file mode 100644 index 000000000000..9dc10df32078 --- /dev/null +++ b/arch/mips/include/asm/bugs.h @@ -0,0 +1,53 @@ +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Copyright (C) 2007 Maciej W. Rozycki + * + * Needs: + * void check_bugs(void); + */ +#ifndef _ASM_BUGS_H +#define _ASM_BUGS_H + +#include +#include + +#include +#include + +extern int daddiu_bug; + +extern void check_bugs64_early(void); + +extern void check_bugs32(void); +extern void check_bugs64(void); + +static inline void check_bugs_early(void) +{ +#ifdef CONFIG_64BIT + check_bugs64_early(); +#endif +} + +static inline void check_bugs(void) +{ + unsigned int cpu = smp_processor_id(); + + cpu_data[cpu].udelay_val = loops_per_jiffy; + check_bugs32(); +#ifdef CONFIG_64BIT + check_bugs64(); +#endif +} + +static inline int r4k_daddiu_bug(void) +{ +#ifdef CONFIG_64BIT + WARN_ON(daddiu_bug < 0); + return daddiu_bug != 0; +#else + return 0; +#endif +} + +#endif /* _ASM_BUGS_H */ diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h new file mode 100644 index 000000000000..fe7dc2d59b69 --- /dev/null +++ b/arch/mips/include/asm/byteorder.h @@ -0,0 +1,76 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 99, 2003 by Ralf Baechle + */ +#ifndef _ASM_BYTEORDER_H +#define _ASM_BYTEORDER_H + +#include +#include + +#ifdef __GNUC__ + +#ifdef CONFIG_CPU_MIPSR2 + +static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x) +{ + __asm__( + " wsbh %0, %1 \n" + : "=r" (x) + : "r" (x)); + + return x; +} +#define __arch__swab16(x) ___arch__swab16(x) + +static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) +{ + __asm__( + " wsbh %0, %1 \n" + " rotr %0, %0, 16 \n" + : "=r" (x) + : "r" (x)); + + return x; +} +#define __arch__swab32(x) ___arch__swab32(x) + +#ifdef CONFIG_CPU_MIPS64_R2 + +static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x) +{ + __asm__( + " dsbh %0, %1 \n" + " dshd %0, %0 \n" + " drotr %0, %0, 32 \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +#define __arch__swab64(x) ___arch__swab64(x) + +#endif /* CONFIG_CPU_MIPS64_R2 */ + +#endif /* CONFIG_CPU_MIPSR2 */ + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#endif /* __GNUC__ */ + +#if defined(__MIPSEB__) +# include +#elif defined(__MIPSEL__) +# include +#else +# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???" +#endif + +#endif /* _ASM_BYTEORDER_H */ diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h new file mode 100644 index 000000000000..37f175c42bb5 --- /dev/null +++ b/arch/mips/include/asm/cache.h @@ -0,0 +1,20 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 98, 99, 2000, 2003 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_CACHE_H +#define _ASM_CACHE_H + +#include + +#define L1_CACHE_SHIFT CONFIG_MIPS_L1_CACHE_SHIFT +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define SMP_CACHE_SHIFT L1_CACHE_SHIFT +#define SMP_CACHE_BYTES L1_CACHE_BYTES + +#endif /* _ASM_CACHE_H */ diff --git a/arch/mips/include/asm/cachectl.h b/arch/mips/include/asm/cachectl.h new file mode 100644 index 000000000000..f3ce721861d3 --- /dev/null +++ b/arch/mips/include/asm/cachectl.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996 by Ralf Baechle + */ +#ifndef _ASM_CACHECTL +#define _ASM_CACHECTL + +/* + * Options for cacheflush system call + */ +#define ICACHE (1<<0) /* flush instruction cache */ +#define DCACHE (1<<1) /* writeback and flush data cache */ +#define BCACHE (ICACHE|DCACHE) /* flush both caches */ + +/* + * Caching modes for the cachectl(2) call + * + * cachectl(2) is currently not supported and returns ENOSYS. + */ +#define CACHEABLE 0 /* make pages cacheable */ +#define UNCACHEABLE 1 /* make pages uncacheable */ + +#endif /* _ASM_CACHECTL */ diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h new file mode 100644 index 000000000000..03b1d69b142f --- /dev/null +++ b/arch/mips/include/asm/cacheflush.h @@ -0,0 +1,116 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle + * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_CACHEFLUSH_H +#define _ASM_CACHEFLUSH_H + +/* Keep includes the same across arches. */ +#include +#include + +/* Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * - flush_icache_range(start, end) flush a range of instructions + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * + * MIPS specific flush operations: + * + * - flush_cache_sigtramp() flush signal trampoline + * - flush_icache_all() flush the entire instruction cache + * - flush_data_cache_page() flushes a page from the data cache + */ +extern void (*flush_cache_all)(void); +extern void (*__flush_cache_all)(void); +extern void (*flush_cache_mm)(struct mm_struct *mm); +#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0) +extern void (*flush_cache_range)(struct vm_area_struct *vma, + unsigned long start, unsigned long end); +extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); +extern void __flush_dcache_page(struct page *page); + +static inline void flush_dcache_page(struct page *page) +{ + if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) + __flush_dcache_page(page); + +} + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +#define ARCH_HAS_FLUSH_ANON_PAGE +extern void __flush_anon_page(struct page *, unsigned long); +static inline void flush_anon_page(struct vm_area_struct *vma, + struct page *page, unsigned long vmaddr) +{ + if (cpu_has_dc_aliases && PageAnon(page)) + __flush_anon_page(page, vmaddr); +} + +static inline void flush_icache_page(struct vm_area_struct *vma, + struct page *page) +{ +} + +extern void (*flush_icache_range)(unsigned long start, unsigned long end); +extern void (*local_flush_icache_range)(unsigned long start, unsigned long end); + +extern void (*__flush_cache_vmap)(void); + +static inline void flush_cache_vmap(unsigned long start, unsigned long end) +{ + if (cpu_has_dc_aliases) + __flush_cache_vmap(); +} + +extern void (*__flush_cache_vunmap)(void); + +static inline void flush_cache_vunmap(unsigned long start, unsigned long end) +{ + if (cpu_has_dc_aliases) + __flush_cache_vunmap(); +} + +extern void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len); + +extern void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len); + +extern void (*flush_cache_sigtramp)(unsigned long addr); +extern void (*flush_icache_all)(void); +extern void (*local_flush_data_cache_page)(void * addr); +extern void (*flush_data_cache_page)(unsigned long addr); + +/* + * This flag is used to indicate that the page pointed to by a pte + * is dirty and requires cleaning before returning it to the user. + */ +#define PG_dcache_dirty PG_arch_1 + +#define Page_dcache_dirty(page) \ + test_bit(PG_dcache_dirty, &(page)->flags) +#define SetPageDcacheDirty(page) \ + set_bit(PG_dcache_dirty, &(page)->flags) +#define ClearPageDcacheDirty(page) \ + clear_bit(PG_dcache_dirty, &(page)->flags) + +/* Run kernel code uncached, useful for cache probing functions. */ +unsigned long run_uncached(void *func); + +extern void *kmap_coherent(struct page *page, unsigned long addr); +extern void kunmap_coherent(void); + +#endif /* _ASM_CACHEFLUSH_H */ diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h new file mode 100644 index 000000000000..256ad2cc6eb8 --- /dev/null +++ b/arch/mips/include/asm/cacheops.h @@ -0,0 +1,85 @@ +/* + * Cache operations for the cache instruction. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle + * (C) Copyright 1999 Silicon Graphics, Inc. + */ +#ifndef __ASM_CACHEOPS_H +#define __ASM_CACHEOPS_H + +/* + * Cache Operations available on all MIPS processors with R4000-style caches + */ +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 +#define Index_Load_Tag_I 0x04 +#define Index_Load_Tag_D 0x05 +#define Index_Store_Tag_I 0x08 +#define Index_Store_Tag_D 0x09 +#if defined(CONFIG_CPU_LOONGSON2) +#define Hit_Invalidate_I 0x00 +#else +#define Hit_Invalidate_I 0x10 +#endif +#define Hit_Invalidate_D 0x11 +#define Hit_Writeback_Inv_D 0x15 + +/* + * R4000-specific cacheops + */ +#define Create_Dirty_Excl_D 0x0d +#define Fill 0x14 +#define Hit_Writeback_I 0x18 +#define Hit_Writeback_D 0x19 + +/* + * R4000SC and R4400SC-specific cacheops + */ +#define Index_Invalidate_SI 0x02 +#define Index_Writeback_Inv_SD 0x03 +#define Index_Load_Tag_SI 0x06 +#define Index_Load_Tag_SD 0x07 +#define Index_Store_Tag_SI 0x0A +#define Index_Store_Tag_SD 0x0B +#define Create_Dirty_Excl_SD 0x0f +#define Hit_Invalidate_SI 0x12 +#define Hit_Invalidate_SD 0x13 +#define Hit_Writeback_Inv_SD 0x17 +#define Hit_Writeback_SD 0x1b +#define Hit_Set_Virtual_SI 0x1e +#define Hit_Set_Virtual_SD 0x1f + +/* + * R5000-specific cacheops + */ +#define R5K_Page_Invalidate_S 0x17 + +/* + * RM7000-specific cacheops + */ +#define Page_Invalidate_T 0x16 + +/* + * R10000-specific cacheops + * + * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused. + * Most of the _S cacheops are identical to the R4000SC _SD cacheops. + */ +#define Index_Writeback_Inv_S 0x03 +#define Index_Load_Tag_S 0x07 +#define Index_Store_Tag_S 0x0B +#define Hit_Invalidate_S 0x13 +#define Cache_Barrier 0x14 +#define Hit_Writeback_Inv_S 0x17 +#define Index_Load_Data_I 0x18 +#define Index_Load_Data_D 0x19 +#define Index_Load_Data_S 0x1b +#define Index_Store_Data_I 0x1c +#define Index_Store_Data_D 0x1d +#define Index_Store_Data_S 0x1f + +#endif /* __ASM_CACHEOPS_H */ diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h new file mode 100644 index 000000000000..290485ac5407 --- /dev/null +++ b/arch/mips/include/asm/checksum.h @@ -0,0 +1,260 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 97, 98, 99, 2001 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2001 Thiemo Seufer. + * Copyright (C) 2002 Maciej W. Rozycki + */ +#ifndef _ASM_CHECKSUM_H +#define _ASM_CHECKSUM_H + +#include + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +__wsum __csum_partial_copy_user(const void *src, void *dst, + int len, __wsum sum, int *err_ptr); + +/* + * this is a new version of the above that records errors it finds in *errp, + * but continues and zeros the rest of the buffer. + */ +static inline +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, + __wsum sum, int *err_ptr) +{ + might_sleep(); + return __csum_partial_copy_user((__force void *)src, dst, + len, sum, err_ptr); +} + +/* + * Copy and checksum to user + */ +#define HAVE_CSUM_COPY_USER +static inline +__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len, + __wsum sum, int *err_ptr) +{ + might_sleep(); + if (access_ok(VERIFY_WRITE, dst, len)) + return __csum_partial_copy_user(src, (__force void *)dst, + len, sum, err_ptr); + if (len) + *err_ptr = -EFAULT; + + return (__force __wsum)-1; /* invalid checksum */ +} + +/* + * the same as csum_partial, but copies from user space (but on MIPS + * we have just one address space, so this is identical to the above) + */ +__wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum); + +/* + * Fold a partial checksum without adding pseudo headers + */ +static inline __sum16 csum_fold(__wsum sum) +{ + __asm__( + " .set push # csum_fold\n" + " .set noat \n" + " sll $1, %0, 16 \n" + " addu %0, $1 \n" + " sltu $1, %0, $1 \n" + " srl %0, %0, 16 \n" + " addu %0, $1 \n" + " xori %0, 0xffff \n" + " .set pop" + : "=r" (sum) + : "0" (sum)); + + return (__force __sum16)sum; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + * By Jorge Cwik , adapted for linux by + * Arnt Gulbrandsen. + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + const unsigned int *word = iph; + const unsigned int *stop = word + ihl; + unsigned int csum; + int carry; + + csum = word[0]; + csum += word[1]; + carry = (csum < word[1]); + csum += carry; + + csum += word[2]; + carry = (csum < word[2]); + csum += carry; + + csum += word[3]; + carry = (csum < word[3]); + csum += carry; + + word += 4; + do { + csum += *word; + carry = (csum < *word); + csum += carry; + word++; + } while (word != stop); + + return csum_fold(csum); +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, + __be32 daddr, unsigned short len, unsigned short proto, + __wsum sum) +{ + __asm__( + " .set push # csum_tcpudp_nofold\n" + " .set noat \n" +#ifdef CONFIG_32BIT + " addu %0, %2 \n" + " sltu $1, %0, %2 \n" + " addu %0, $1 \n" + + " addu %0, %3 \n" + " sltu $1, %0, %3 \n" + " addu %0, $1 \n" + + " addu %0, %4 \n" + " sltu $1, %0, %4 \n" + " addu %0, $1 \n" +#endif +#ifdef CONFIG_64BIT + " daddu %0, %2 \n" + " daddu %0, %3 \n" + " daddu %0, %4 \n" + " dsll32 $1, %0, 0 \n" + " daddu %0, $1 \n" + " dsra32 %0, %0, 0 \n" +#endif + " .set pop" + : "=r" (sum) + : "0" ((__force unsigned long)daddr), + "r" ((__force unsigned long)saddr), +#ifdef __MIPSEL__ + "r" ((proto + len) << 8), +#else + "r" (proto + len), +#endif + "r" ((__force unsigned long)sum)); + + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum) +{ + __asm__( + " .set push # csum_ipv6_magic\n" + " .set noreorder \n" + " .set noat \n" + " addu %0, %5 # proto (long in network byte order)\n" + " sltu $1, %0, %5 \n" + " addu %0, $1 \n" + + " addu %0, %6 # csum\n" + " sltu $1, %0, %6 \n" + " lw %1, 0(%2) # four words source address\n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 4(%2) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 8(%2) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 12(%2) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 0(%3) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 4(%3) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 8(%3) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " lw %1, 12(%3) \n" + " addu %0, $1 \n" + " addu %0, %1 \n" + " sltu $1, %0, %1 \n" + + " addu %0, $1 # Add final carry\n" + " .set pop" + : "=r" (sum), "=r" (proto) + : "r" (saddr), "r" (daddr), + "0" (htonl(len)), "1" (htonl(proto)), "r" (sum)); + + return csum_fold(sum); +} + +#endif /* _ASM_CHECKSUM_H */ diff --git a/arch/mips/include/asm/cmp.h b/arch/mips/include/asm/cmp.h new file mode 100644 index 000000000000..89a73fb93ae6 --- /dev/null +++ b/arch/mips/include/asm/cmp.h @@ -0,0 +1,18 @@ +#ifndef _ASM_CMP_H +#define _ASM_CMP_H + +/* + * Definitions for CMP multitasking on MIPS cores + */ +struct task_struct; + +extern void cmp_smp_setup(void); +extern void cmp_smp_finish(void); +extern void cmp_boot_secondary(int cpu, struct task_struct *t); +extern void cmp_init_secondary(void); +extern void cmp_cpus_done(void); +extern void cmp_prepare_cpus(unsigned int max_cpus); + +/* This is platform specific */ +extern void cmp_send_ipi(int cpu, unsigned int action); +#endif /* _ASM_CMP_H */ diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h new file mode 100644 index 000000000000..4a812c3ceb90 --- /dev/null +++ b/arch/mips/include/asm/cmpxchg.h @@ -0,0 +1,124 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 06, 07 by Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_CMPXCHG_H +#define __ASM_CMPXCHG_H + +#include + +#define __HAVE_ARCH_CMPXCHG 1 + +#define __cmpxchg_asm(ld, st, m, old, new) \ +({ \ + __typeof(*(m)) __ret; \ + \ + if (cpu_has_llsc && R10000_LLSC_WAR) { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips3 \n" \ + "1: " ld " %0, %2 # __cmpxchg_asm \n" \ + " bne %0, %z3, 2f \n" \ + " .set mips0 \n" \ + " move $1, %z4 \n" \ + " .set mips3 \n" \ + " " st " $1, %1 \n" \ + " beqzl $1, 1b \n" \ + "2: \n" \ + " .set pop \n" \ + : "=&r" (__ret), "=R" (*m) \ + : "R" (*m), "Jr" (old), "Jr" (new) \ + : "memory"); \ + } else if (cpu_has_llsc) { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips3 \n" \ + "1: " ld " %0, %2 # __cmpxchg_asm \n" \ + " bne %0, %z3, 2f \n" \ + " .set mips0 \n" \ + " move $1, %z4 \n" \ + " .set mips3 \n" \ + " " st " $1, %1 \n" \ + " beqz $1, 3f \n" \ + "2: \n" \ + " .subsection 2 \n" \ + "3: b 1b \n" \ + " .previous \n" \ + " .set pop \n" \ + : "=&r" (__ret), "=R" (*m) \ + : "R" (*m), "Jr" (old), "Jr" (new) \ + : "memory"); \ + } else { \ + unsigned long __flags; \ + \ + raw_local_irq_save(__flags); \ + __ret = *m; \ + if (__ret == old) \ + *m = new; \ + raw_local_irq_restore(__flags); \ + } \ + \ + __ret; \ +}) + +/* + * This function doesn't exist, so you'll get a linker error + * if something tries to do an invalid cmpxchg(). + */ +extern void __cmpxchg_called_with_bad_pointer(void); + +#define __cmpxchg(ptr, old, new, barrier) \ +({ \ + __typeof__(ptr) __ptr = (ptr); \ + __typeof__(*(ptr)) __old = (old); \ + __typeof__(*(ptr)) __new = (new); \ + __typeof__(*(ptr)) __res = 0; \ + \ + barrier; \ + \ + switch (sizeof(*(__ptr))) { \ + case 4: \ + __res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new); \ + break; \ + case 8: \ + if (sizeof(long) == 8) { \ + __res = __cmpxchg_asm("lld", "scd", __ptr, \ + __old, __new); \ + break; \ + } \ + default: \ + __cmpxchg_called_with_bad_pointer(); \ + break; \ + } \ + \ + barrier; \ + \ + __res; \ +}) + +#define cmpxchg(ptr, old, new) __cmpxchg(ptr, old, new, smp_llsc_mb()) +#define cmpxchg_local(ptr, old, new) __cmpxchg(ptr, old, new, ) + +#define cmpxchg64(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg((ptr), (o), (n)); \ + }) + +#ifdef CONFIG_64BIT +#define cmpxchg64_local(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_local((ptr), (o), (n)); \ + }) +#else +#include +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) +#endif + +#endif /* __ASM_CMPXCHG_H */ diff --git a/arch/mips/include/asm/compat-signal.h b/arch/mips/include/asm/compat-signal.h new file mode 100644 index 000000000000..368a99e5c3e1 --- /dev/null +++ b/arch/mips/include/asm/compat-signal.h @@ -0,0 +1,119 @@ +#ifndef __ASM_COMPAT_SIGNAL_H +#define __ASM_COMPAT_SIGNAL_H + +#include +#include +#include + +#include +#include + +#include + +#define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3) + +typedef struct compat_siginfo { + int si_signo; + int si_code; + int si_errno; + + union { + int _pad[SI_PAD_SIZE32]; + + /* kill() */ + struct { + compat_pid_t _pid; /* sender's pid */ + compat_uid_t _uid; /* sender's uid */ + } _kill; + + /* SIGCHLD */ + struct { + compat_pid_t _pid; /* which child */ + compat_uid_t _uid; /* sender's uid */ + int _status; /* exit code */ + compat_clock_t _utime; + compat_clock_t _stime; + } _sigchld; + + /* IRIX SIGCHLD */ + struct { + compat_pid_t _pid; /* which child */ + compat_clock_t _utime; + int _status; /* exit code */ + compat_clock_t _stime; + } _irix_sigchld; + + /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ + struct { + s32 _addr; /* faulting insn/memory ref. */ + } _sigfault; + + /* SIGPOLL, SIGXFSZ (To do ...) */ + struct { + int _band; /* POLL_IN, POLL_OUT, POLL_MSG */ + int _fd; + } _sigpoll; + + /* POSIX.1b timers */ + struct { + timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + compat_sigval_t _sigval;/* same as below */ + int _sys_private; /* not to be passed to user */ + } _timer; + + /* POSIX.1b signals */ + struct { + compat_pid_t _pid; /* sender's pid */ + compat_uid_t _uid; /* sender's uid */ + compat_sigval_t _sigval; + } _rt; + + } _sifields; +} compat_siginfo_t; + +static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d, + const sigset_t *s) +{ + int err; + + BUG_ON(sizeof(*d) != sizeof(*s)); + BUG_ON(_NSIG_WORDS != 2); + + err = __put_user(s->sig[0], &d->sig[0]); + err |= __put_user(s->sig[0] >> 32, &d->sig[1]); + err |= __put_user(s->sig[1], &d->sig[2]); + err |= __put_user(s->sig[1] >> 32, &d->sig[3]); + + return err; +} + +static inline int __copy_conv_sigset_from_user(sigset_t *d, + const compat_sigset_t __user *s) +{ + int err; + union sigset_u { + sigset_t s; + compat_sigset_t c; + } *u = (union sigset_u *) d; + + BUG_ON(sizeof(*d) != sizeof(*s)); + BUG_ON(_NSIG_WORDS != 2); + +#ifdef CONFIG_CPU_BIG_ENDIAN + err = __get_user(u->c.sig[1], &s->sig[0]); + err |= __get_user(u->c.sig[0], &s->sig[1]); + err |= __get_user(u->c.sig[3], &s->sig[2]); + err |= __get_user(u->c.sig[2], &s->sig[3]); +#endif +#ifdef CONFIG_CPU_LITTLE_ENDIAN + err = __get_user(u->c.sig[0], &s->sig[0]); + err |= __get_user(u->c.sig[1], &s->sig[1]); + err |= __get_user(u->c.sig[2], &s->sig[2]); + err |= __get_user(u->c.sig[3], &s->sig[3]); +#endif + + return err; +} + +#endif /* __ASM_COMPAT_SIGNAL_H */ diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h new file mode 100644 index 000000000000..ac5d541368e9 --- /dev/null +++ b/arch/mips/include/asm/compat.h @@ -0,0 +1,221 @@ +#ifndef _ASM_COMPAT_H +#define _ASM_COMPAT_H +/* + * Architecture specific compatibility types + */ +#include +#include +#include + +#define COMPAT_USER_HZ 100 + +typedef u32 compat_size_t; +typedef s32 compat_ssize_t; +typedef s32 compat_time_t; +typedef s32 compat_clock_t; +typedef s32 compat_suseconds_t; + +typedef s32 compat_pid_t; +typedef s32 __compat_uid_t; +typedef s32 __compat_gid_t; +typedef __compat_uid_t __compat_uid32_t; +typedef __compat_gid_t __compat_gid32_t; +typedef u32 compat_mode_t; +typedef u32 compat_ino_t; +typedef u32 compat_dev_t; +typedef s32 compat_off_t; +typedef s64 compat_loff_t; +typedef u32 compat_nlink_t; +typedef s32 compat_ipc_pid_t; +typedef s32 compat_daddr_t; +typedef s32 compat_caddr_t; +typedef struct { + s32 val[2]; +} compat_fsid_t; +typedef s32 compat_timer_t; +typedef s32 compat_key_t; + +typedef s32 compat_int_t; +typedef s32 compat_long_t; +typedef s64 compat_s64; +typedef u32 compat_uint_t; +typedef u32 compat_ulong_t; +typedef u64 compat_u64; + +struct compat_timespec { + compat_time_t tv_sec; + s32 tv_nsec; +}; + +struct compat_timeval { + compat_time_t tv_sec; + s32 tv_usec; +}; + +struct compat_stat { + compat_dev_t st_dev; + s32 st_pad1[3]; + compat_ino_t st_ino; + compat_mode_t st_mode; + compat_nlink_t st_nlink; + __compat_uid_t st_uid; + __compat_gid_t st_gid; + compat_dev_t st_rdev; + s32 st_pad2[2]; + compat_off_t st_size; + s32 st_pad3; + compat_time_t st_atime; + s32 st_atime_nsec; + compat_time_t st_mtime; + s32 st_mtime_nsec; + compat_time_t st_ctime; + s32 st_ctime_nsec; + s32 st_blksize; + s32 st_blocks; + s32 st_pad4[14]; +}; + +struct compat_flock { + short l_type; + short l_whence; + compat_off_t l_start; + compat_off_t l_len; + s32 l_sysid; + compat_pid_t l_pid; + short __unused; + s32 pad[4]; +}; + +#define F_GETLK64 33 +#define F_SETLK64 34 +#define F_SETLKW64 35 + +struct compat_flock64 { + short l_type; + short l_whence; + compat_loff_t l_start; + compat_loff_t l_len; + compat_pid_t l_pid; +}; + +struct compat_statfs { + int f_type; + int f_bsize; + int f_frsize; + int f_blocks; + int f_bfree; + int f_files; + int f_ffree; + int f_bavail; + compat_fsid_t f_fsid; + int f_namelen; + int f_spare[6]; +}; + +#define COMPAT_RLIM_INFINITY 0x7fffffffUL + +typedef u32 compat_old_sigset_t; /* at least 32 bits */ + +#define _COMPAT_NSIG 128 /* Don't ask !$@#% ... */ +#define _COMPAT_NSIG_BPW 32 + +typedef u32 compat_sigset_word; + +#define COMPAT_OFF_T_MAX 0x7fffffff +#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL + +/* + * A pointer passed in from user mode. This should not + * be used for syscall parameters, just declare them + * as pointers because the syscall entry code will have + * appropriately converted them already. + */ +typedef u32 compat_uptr_t; + +static inline void __user *compat_ptr(compat_uptr_t uptr) +{ + /* cast to a __user pointer via "unsigned long" makes sparse happy */ + return (void __user *)(unsigned long)(long)uptr; +} + +static inline compat_uptr_t ptr_to_compat(void __user *uptr) +{ + return (u32)(unsigned long)uptr; +} + +static inline void __user *compat_alloc_user_space(long len) +{ + struct pt_regs *regs = (struct pt_regs *) + ((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1; + + return (void __user *) (regs->regs[29] - len); +} + +struct compat_ipc64_perm { + compat_key_t key; + __compat_uid32_t uid; + __compat_gid32_t gid; + __compat_uid32_t cuid; + __compat_gid32_t cgid; + compat_mode_t mode; + unsigned short seq; + unsigned short __pad2; + compat_ulong_t __unused1; + compat_ulong_t __unused2; +}; + +struct compat_semid64_ds { + struct compat_ipc64_perm sem_perm; + compat_time_t sem_otime; + compat_time_t sem_ctime; + compat_ulong_t sem_nsems; + compat_ulong_t __unused1; + compat_ulong_t __unused2; +}; + +struct compat_msqid64_ds { + struct compat_ipc64_perm msg_perm; +#ifndef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused1; +#endif + compat_time_t msg_stime; +#ifdef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused1; +#endif +#ifndef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused2; +#endif + compat_time_t msg_rtime; +#ifdef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused2; +#endif +#ifndef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused3; +#endif + compat_time_t msg_ctime; +#ifdef CONFIG_CPU_LITTLE_ENDIAN + compat_ulong_t __unused3; +#endif + compat_ulong_t msg_cbytes; + compat_ulong_t msg_qnum; + compat_ulong_t msg_qbytes; + compat_pid_t msg_lspid; + compat_pid_t msg_lrpid; + compat_ulong_t __unused4; + compat_ulong_t __unused5; +}; + +struct compat_shmid64_ds { + struct compat_ipc64_perm shm_perm; + compat_size_t shm_segsz; + compat_time_t shm_atime; + compat_time_t shm_dtime; + compat_time_t shm_ctime; + compat_pid_t shm_cpid; + compat_pid_t shm_lpid; + compat_ulong_t shm_nattch; + compat_ulong_t __unused1; + compat_ulong_t __unused2; +}; + +#endif /* _ASM_COMPAT_H */ diff --git a/arch/mips/include/asm/compiler.h b/arch/mips/include/asm/compiler.h new file mode 100644 index 000000000000..71f5c5cfc58a --- /dev/null +++ b/arch/mips/include/asm/compiler.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2004, 2007 Maciej W. Rozycki + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef _ASM_COMPILER_H +#define _ASM_COMPILER_H + +#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) +#define GCC_IMM_ASM() "n" +#define GCC_REG_ACCUM "$0" +#else +#define GCC_IMM_ASM() "rn" +#define GCC_REG_ACCUM "accum" +#endif + +#endif /* _ASM_COMPILER_H */ diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h new file mode 100644 index 000000000000..5ea701fc3425 --- /dev/null +++ b/arch/mips/include/asm/cpu-features.h @@ -0,0 +1,219 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + */ +#ifndef __ASM_CPU_FEATURES_H +#define __ASM_CPU_FEATURES_H + +#include +#include +#include + +#ifndef current_cpu_type +#define current_cpu_type() current_cpu_data.cputype +#endif + +/* + * SMP assumption: Options of CPU 0 are a superset of all processors. + * This is true for all known MIPS systems. + */ +#ifndef cpu_has_tlb +#define cpu_has_tlb (cpu_data[0].options & MIPS_CPU_TLB) +#endif +#ifndef cpu_has_4kex +#define cpu_has_4kex (cpu_data[0].options & MIPS_CPU_4KEX) +#endif +#ifndef cpu_has_3k_cache +#define cpu_has_3k_cache (cpu_data[0].options & MIPS_CPU_3K_CACHE) +#endif +#define cpu_has_6k_cache 0 +#define cpu_has_8k_cache 0 +#ifndef cpu_has_4k_cache +#define cpu_has_4k_cache (cpu_data[0].options & MIPS_CPU_4K_CACHE) +#endif +#ifndef cpu_has_tx39_cache +#define cpu_has_tx39_cache (cpu_data[0].options & MIPS_CPU_TX39_CACHE) +#endif +#ifndef cpu_has_fpu +#define cpu_has_fpu (current_cpu_data.options & MIPS_CPU_FPU) +#define raw_cpu_has_fpu (raw_current_cpu_data.options & MIPS_CPU_FPU) +#else +#define raw_cpu_has_fpu cpu_has_fpu +#endif +#ifndef cpu_has_32fpr +#define cpu_has_32fpr (cpu_data[0].options & MIPS_CPU_32FPR) +#endif +#ifndef cpu_has_counter +#define cpu_has_counter (cpu_data[0].options & MIPS_CPU_COUNTER) +#endif +#ifndef cpu_has_watch +#define cpu_has_watch (cpu_data[0].options & MIPS_CPU_WATCH) +#endif +#ifndef cpu_has_divec +#define cpu_has_divec (cpu_data[0].options & MIPS_CPU_DIVEC) +#endif +#ifndef cpu_has_vce +#define cpu_has_vce (cpu_data[0].options & MIPS_CPU_VCE) +#endif +#ifndef cpu_has_cache_cdex_p +#define cpu_has_cache_cdex_p (cpu_data[0].options & MIPS_CPU_CACHE_CDEX_P) +#endif +#ifndef cpu_has_cache_cdex_s +#define cpu_has_cache_cdex_s (cpu_data[0].options & MIPS_CPU_CACHE_CDEX_S) +#endif +#ifndef cpu_has_prefetch +#define cpu_has_prefetch (cpu_data[0].options & MIPS_CPU_PREFETCH) +#endif +#ifndef cpu_has_mcheck +#define cpu_has_mcheck (cpu_data[0].options & MIPS_CPU_MCHECK) +#endif +#ifndef cpu_has_ejtag +#define cpu_has_ejtag (cpu_data[0].options & MIPS_CPU_EJTAG) +#endif +#ifndef cpu_has_llsc +#define cpu_has_llsc (cpu_data[0].options & MIPS_CPU_LLSC) +#endif +#ifndef cpu_has_mips16 +#define cpu_has_mips16 (cpu_data[0].ases & MIPS_ASE_MIPS16) +#endif +#ifndef cpu_has_mdmx +#define cpu_has_mdmx (cpu_data[0].ases & MIPS_ASE_MDMX) +#endif +#ifndef cpu_has_mips3d +#define cpu_has_mips3d (cpu_data[0].ases & MIPS_ASE_MIPS3D) +#endif +#ifndef cpu_has_smartmips +#define cpu_has_smartmips (cpu_data[0].ases & MIPS_ASE_SMARTMIPS) +#endif +#ifndef cpu_has_vtag_icache +#define cpu_has_vtag_icache (cpu_data[0].icache.flags & MIPS_CACHE_VTAG) +#endif +#ifndef cpu_has_dc_aliases +#define cpu_has_dc_aliases (cpu_data[0].dcache.flags & MIPS_CACHE_ALIASES) +#endif +#ifndef cpu_has_ic_fills_f_dc +#define cpu_has_ic_fills_f_dc (cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC) +#endif +#ifndef cpu_has_pindexed_dcache +#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) +#endif + +/* + * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors + * such as the R10000 have I-Caches that snoop local stores; the embedded ones + * don't. For maintaining I-cache coherency this means we need to flush the + * D-cache all the way back to whever the I-cache does refills from, so the + * I-cache has a chance to see the new data at all. Then we have to flush the + * I-cache also. + * Note we may have been rescheduled and may no longer be running on the CPU + * that did the store so we can't optimize this into only doing the flush on + * the local CPU. + */ +#ifndef cpu_icache_snoops_remote_store +#ifdef CONFIG_SMP +#define cpu_icache_snoops_remote_store (cpu_data[0].icache.flags & MIPS_IC_SNOOPS_REMOTE) +#else +#define cpu_icache_snoops_remote_store 1 +#endif +#endif + +# ifndef cpu_has_mips32r1 +# define cpu_has_mips32r1 (cpu_data[0].isa_level & MIPS_CPU_ISA_M32R1) +# endif +# ifndef cpu_has_mips32r2 +# define cpu_has_mips32r2 (cpu_data[0].isa_level & MIPS_CPU_ISA_M32R2) +# endif +# ifndef cpu_has_mips64r1 +# define cpu_has_mips64r1 (cpu_data[0].isa_level & MIPS_CPU_ISA_M64R1) +# endif +# ifndef cpu_has_mips64r2 +# define cpu_has_mips64r2 (cpu_data[0].isa_level & MIPS_CPU_ISA_M64R2) +# endif + +/* + * Shortcuts ... + */ +#define cpu_has_mips32 (cpu_has_mips32r1 | cpu_has_mips32r2) +#define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2) +#define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1) +#define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2) + +#ifndef cpu_has_dsp +#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP) +#endif + +#ifndef cpu_has_mipsmt +#define cpu_has_mipsmt (cpu_data[0].ases & MIPS_ASE_MIPSMT) +#endif + +#ifndef cpu_has_userlocal +#define cpu_has_userlocal (cpu_data[0].options & MIPS_CPU_ULRI) +#endif + +#ifdef CONFIG_32BIT +# ifndef cpu_has_nofpuex +# define cpu_has_nofpuex (cpu_data[0].options & MIPS_CPU_NOFPUEX) +# endif +# ifndef cpu_has_64bits +# define cpu_has_64bits (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT) +# endif +# ifndef cpu_has_64bit_zero_reg +# define cpu_has_64bit_zero_reg (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT) +# endif +# ifndef cpu_has_64bit_gp_regs +# define cpu_has_64bit_gp_regs 0 +# endif +# ifndef cpu_has_64bit_addresses +# define cpu_has_64bit_addresses 0 +# endif +#endif + +#ifdef CONFIG_64BIT +# ifndef cpu_has_nofpuex +# define cpu_has_nofpuex 0 +# endif +# ifndef cpu_has_64bits +# define cpu_has_64bits 1 +# endif +# ifndef cpu_has_64bit_zero_reg +# define cpu_has_64bit_zero_reg 1 +# endif +# ifndef cpu_has_64bit_gp_regs +# define cpu_has_64bit_gp_regs 1 +# endif +# ifndef cpu_has_64bit_addresses +# define cpu_has_64bit_addresses 1 +# endif +#endif + +#if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint) +# define cpu_has_vint (cpu_data[0].options & MIPS_CPU_VINT) +#elif !defined(cpu_has_vint) +# define cpu_has_vint 0 +#endif + +#if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic) +# define cpu_has_veic (cpu_data[0].options & MIPS_CPU_VEIC) +#elif !defined(cpu_has_veic) +# define cpu_has_veic 0 +#endif + +#ifndef cpu_has_inclusive_pcaches +#define cpu_has_inclusive_pcaches (cpu_data[0].options & MIPS_CPU_INCLUSIVE_CACHES) +#endif + +#ifndef cpu_dcache_line_size +#define cpu_dcache_line_size() cpu_data[0].dcache.linesz +#endif +#ifndef cpu_icache_line_size +#define cpu_icache_line_size() cpu_data[0].icache.linesz +#endif +#ifndef cpu_scache_line_size +#define cpu_scache_line_size() cpu_data[0].scache.linesz +#endif + +#endif /* __ASM_CPU_FEATURES_H */ diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h new file mode 100644 index 000000000000..2de73dbb2e9e --- /dev/null +++ b/arch/mips/include/asm/cpu-info.h @@ -0,0 +1,84 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 Waldorf GMBH + * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle + * Copyright (C) 1996 Paul M. Antoine + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2004 Maciej W. Rozycki + */ +#ifndef __ASM_CPU_INFO_H +#define __ASM_CPU_INFO_H + +#include + +/* + * Descriptor for a cache + */ +struct cache_desc { + unsigned int waysize; /* Bytes per way */ + unsigned short sets; /* Number of lines per set */ + unsigned char ways; /* Number of ways */ + unsigned char linesz; /* Size of line in bytes */ + unsigned char waybit; /* Bits to select in a cache set */ + unsigned char flags; /* Flags describing cache properties */ +}; + +/* + * Flag definitions + */ +#define MIPS_CACHE_NOT_PRESENT 0x00000001 +#define MIPS_CACHE_VTAG 0x00000002 /* Virtually tagged cache */ +#define MIPS_CACHE_ALIASES 0x00000004 /* Cache could have aliases */ +#define MIPS_CACHE_IC_F_DC 0x00000008 /* Ic can refill from D-cache */ +#define MIPS_IC_SNOOPS_REMOTE 0x00000010 /* Ic snoops remote stores */ +#define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */ + +struct cpuinfo_mips { + unsigned long udelay_val; + unsigned long asid_cache; + + /* + * Capability and feature descriptor structure for MIPS CPU + */ + unsigned long options; + unsigned long ases; + unsigned int processor_id; + unsigned int fpu_id; + unsigned int cputype; + int isa_level; + int tlbsize; + struct cache_desc icache; /* Primary I-cache */ + struct cache_desc dcache; /* Primary D or combined I/D cache */ + struct cache_desc scache; /* Secondary cache */ + struct cache_desc tcache; /* Tertiary/split secondary cache */ + int srsets; /* Shadow register sets */ + int core; /* physical core number */ +#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC) + /* + * In the MIPS MT "SMTC" model, each TC is considered + * to be a "CPU" for the purposes of scheduling, but + * exception resources, ASID spaces, etc, are common + * to all TCs within the same VPE. + */ + int vpe_id; /* Virtual Processor number */ +#endif +#ifdef CONFIG_MIPS_MT_SMTC + int tc_id; /* Thread Context number */ +#endif + void *data; /* Additional data */ +} __attribute__((aligned(SMP_CACHE_BYTES))); + +extern struct cpuinfo_mips cpu_data[]; +#define current_cpu_data cpu_data[smp_processor_id()] +#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] + +extern void cpu_probe(void); +extern void cpu_report(void); + +extern const char *__cpu_name[]; +#define cpu_name_string() __cpu_name[smp_processor_id()] + +#endif /* __ASM_CPU_INFO_H */ diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h new file mode 100644 index 000000000000..229a786101d9 --- /dev/null +++ b/arch/mips/include/asm/cpu.h @@ -0,0 +1,267 @@ +/* + * cpu.h: Values of the PRId register used to match up + * various MIPS cpu types. + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 2004 Maciej W. Rozycki + */ +#ifndef _ASM_CPU_H +#define _ASM_CPU_H + +/* Assigned Company values for bits 23:16 of the PRId Register + (CP0 register 15, select 0). As of the MIPS32 and MIPS64 specs from + MTI, the PRId register is defined in this (backwards compatible) + way: + + +----------------+----------------+----------------+----------------+ + | Company Options| Company ID | Processor ID | Revision | + +----------------+----------------+----------------+----------------+ + 31 24 23 16 15 8 7 + + I don't have docs for all the previous processors, but my impression is + that bits 16-23 have been 0 for all MIPS processors before the MIPS32/64 + spec. +*/ + +#define PRID_COMP_LEGACY 0x000000 +#define PRID_COMP_MIPS 0x010000 +#define PRID_COMP_BROADCOM 0x020000 +#define PRID_COMP_ALCHEMY 0x030000 +#define PRID_COMP_SIBYTE 0x040000 +#define PRID_COMP_SANDCRAFT 0x050000 +#define PRID_COMP_NXP 0x060000 +#define PRID_COMP_TOSHIBA 0x070000 +#define PRID_COMP_LSI 0x080000 +#define PRID_COMP_LEXRA 0x0b0000 + + +/* + * Assigned values for the product ID register. In order to detect a + * certain CPU type exactly eventually additional registers may need to + * be examined. These are valid when 23:16 == PRID_COMP_LEGACY + */ +#define PRID_IMP_R2000 0x0100 +#define PRID_IMP_AU1_REV1 0x0100 +#define PRID_IMP_AU1_REV2 0x0200 +#define PRID_IMP_R3000 0x0200 /* Same as R2000A */ +#define PRID_IMP_R6000 0x0300 /* Same as R3000A */ +#define PRID_IMP_R4000 0x0400 +#define PRID_IMP_R6000A 0x0600 +#define PRID_IMP_R10000 0x0900 +#define PRID_IMP_R4300 0x0b00 +#define PRID_IMP_VR41XX 0x0c00 +#define PRID_IMP_R12000 0x0e00 +#define PRID_IMP_R14000 0x0f00 +#define PRID_IMP_R8000 0x1000 +#define PRID_IMP_PR4450 0x1200 +#define PRID_IMP_R4600 0x2000 +#define PRID_IMP_R4700 0x2100 +#define PRID_IMP_TX39 0x2200 +#define PRID_IMP_R4640 0x2200 +#define PRID_IMP_R4650 0x2200 /* Same as R4640 */ +#define PRID_IMP_R5000 0x2300 +#define PRID_IMP_TX49 0x2d00 +#define PRID_IMP_SONIC 0x2400 +#define PRID_IMP_MAGIC 0x2500 +#define PRID_IMP_RM7000 0x2700 +#define PRID_IMP_NEVADA 0x2800 /* RM5260 ??? */ +#define PRID_IMP_RM9000 0x3400 +#define PRID_IMP_LOONGSON1 0x4200 +#define PRID_IMP_R5432 0x5400 +#define PRID_IMP_R5500 0x5500 +#define PRID_IMP_LOONGSON2 0x6300 + +#define PRID_IMP_UNKNOWN 0xff00 + +/* + * These are the PRID's for when 23:16 == PRID_COMP_MIPS + */ + +#define PRID_IMP_4KC 0x8000 +#define PRID_IMP_5KC 0x8100 +#define PRID_IMP_20KC 0x8200 +#define PRID_IMP_4KEC 0x8400 +#define PRID_IMP_4KSC 0x8600 +#define PRID_IMP_25KF 0x8800 +#define PRID_IMP_5KE 0x8900 +#define PRID_IMP_4KECR2 0x9000 +#define PRID_IMP_4KEMPR2 0x9100 +#define PRID_IMP_4KSD 0x9200 +#define PRID_IMP_24K 0x9300 +#define PRID_IMP_34K 0x9500 +#define PRID_IMP_24KE 0x9600 +#define PRID_IMP_74K 0x9700 +#define PRID_IMP_1004K 0x9900 + +/* + * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE + */ + +#define PRID_IMP_SB1 0x0100 +#define PRID_IMP_SB1A 0x1100 + +/* + * These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT + */ + +#define PRID_IMP_SR71000 0x0400 + +/* + * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM + */ + +#define PRID_IMP_BCM4710 0x4000 +#define PRID_IMP_BCM3302 0x9000 + +/* + * Definitions for 7:0 on legacy processors + */ + +#define PRID_REV_MASK 0x00ff + +#define PRID_REV_TX4927 0x0022 +#define PRID_REV_TX4937 0x0030 +#define PRID_REV_R4400 0x0040 +#define PRID_REV_R3000A 0x0030 +#define PRID_REV_R3000 0x0020 +#define PRID_REV_R2000A 0x0010 +#define PRID_REV_TX3912 0x0010 +#define PRID_REV_TX3922 0x0030 +#define PRID_REV_TX3927 0x0040 +#define PRID_REV_VR4111 0x0050 +#define PRID_REV_VR4181 0x0050 /* Same as VR4111 */ +#define PRID_REV_VR4121 0x0060 +#define PRID_REV_VR4122 0x0070 +#define PRID_REV_VR4181A 0x0070 /* Same as VR4122 */ +#define PRID_REV_VR4130 0x0080 +#define PRID_REV_34K_V1_0_2 0x0022 + +/* + * Older processors used to encode processor version and revision in two + * 4-bit bitfields, the 4K seems to simply count up and even newer MTI cores + * have switched to use the 8-bits as 3:3:2 bitfield with the last field as + * the patch number. *ARGH* + */ +#define PRID_REV_ENCODE_44(ver, rev) \ + ((ver) << 4 | (rev)) +#define PRID_REV_ENCODE_332(ver, rev, patch) \ + ((ver) << 5 | (rev) << 2 | (patch)) + +/* + * FPU implementation/revision register (CP1 control register 0). + * + * +---------------------------------+----------------+----------------+ + * | 0 | Implementation | Revision | + * +---------------------------------+----------------+----------------+ + * 31 16 15 8 7 0 + */ + +#define FPIR_IMP_NONE 0x0000 + +enum cpu_type_enum { + CPU_UNKNOWN, + + /* + * R2000 class processors + */ + CPU_R2000, CPU_R3000, CPU_R3000A, CPU_R3041, CPU_R3051, CPU_R3052, + CPU_R3081, CPU_R3081E, + + /* + * R6000 class processors + */ + CPU_R6000, CPU_R6000A, + + /* + * R4000 class processors + */ + CPU_R4000PC, CPU_R4000SC, CPU_R4000MC, CPU_R4200, CPU_R4300, CPU_R4310, + CPU_R4400PC, CPU_R4400SC, CPU_R4400MC, CPU_R4600, CPU_R4640, CPU_R4650, + CPU_R4700, CPU_R5000, CPU_R5000A, CPU_R5500, CPU_NEVADA, CPU_R5432, + CPU_R10000, CPU_R12000, CPU_R14000, CPU_VR41XX, CPU_VR4111, CPU_VR4121, + CPU_VR4122, CPU_VR4131, CPU_VR4133, CPU_VR4181, CPU_VR4181A, CPU_RM7000, + CPU_SR71000, CPU_RM9000, CPU_TX49XX, + + /* + * R8000 class processors + */ + CPU_R8000, + + /* + * TX3900 class processors + */ + CPU_TX3912, CPU_TX3922, CPU_TX3927, + + /* + * MIPS32 class processors + */ + CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K, + CPU_AU1000, CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500, + CPU_AU1550, CPU_PR4450, CPU_BCM3302, CPU_BCM4710, + + /* + * MIPS64 class processors + */ + CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, + + CPU_LAST +}; + + +/* + * ISA Level encodings + * + */ +#define MIPS_CPU_ISA_I 0x00000001 +#define MIPS_CPU_ISA_II 0x00000002 +#define MIPS_CPU_ISA_III 0x00000004 +#define MIPS_CPU_ISA_IV 0x00000008 +#define MIPS_CPU_ISA_V 0x00000010 +#define MIPS_CPU_ISA_M32R1 0x00000020 +#define MIPS_CPU_ISA_M32R2 0x00000040 +#define MIPS_CPU_ISA_M64R1 0x00000080 +#define MIPS_CPU_ISA_M64R2 0x00000100 + +#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \ + MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 ) +#define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \ + MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2) + +/* + * CPU Option encodings + */ +#define MIPS_CPU_TLB 0x00000001 /* CPU has TLB */ +#define MIPS_CPU_4KEX 0x00000002 /* "R4K" exception model */ +#define MIPS_CPU_3K_CACHE 0x00000004 /* R3000-style caches */ +#define MIPS_CPU_4K_CACHE 0x00000008 /* R4000-style caches */ +#define MIPS_CPU_TX39_CACHE 0x00000010 /* TX3900-style caches */ +#define MIPS_CPU_FPU 0x00000020 /* CPU has FPU */ +#define MIPS_CPU_32FPR 0x00000040 /* 32 dbl. prec. FP registers */ +#define MIPS_CPU_COUNTER 0x00000080 /* Cycle count/compare */ +#define MIPS_CPU_WATCH 0x00000100 /* watchpoint registers */ +#define MIPS_CPU_DIVEC 0x00000200 /* dedicated interrupt vector */ +#define MIPS_CPU_VCE 0x00000400 /* virt. coherence conflict possible */ +#define MIPS_CPU_CACHE_CDEX_P 0x00000800 /* Create_Dirty_Exclusive CACHE op */ +#define MIPS_CPU_CACHE_CDEX_S 0x00001000 /* ... same for seconary cache ... */ +#define MIPS_CPU_MCHECK 0x00002000 /* Machine check exception */ +#define MIPS_CPU_EJTAG 0x00004000 /* EJTAG exception */ +#define MIPS_CPU_NOFPUEX 0x00008000 /* no FPU exception */ +#define MIPS_CPU_LLSC 0x00010000 /* CPU has ll/sc instructions */ +#define MIPS_CPU_INCLUSIVE_CACHES 0x00020000 /* P-cache subset enforced */ +#define MIPS_CPU_PREFETCH 0x00040000 /* CPU has usable prefetch */ +#define MIPS_CPU_VINT 0x00080000 /* CPU supports MIPSR2 vectored interrupts */ +#define MIPS_CPU_VEIC 0x00100000 /* CPU supports MIPSR2 external interrupt controller mode */ +#define MIPS_CPU_ULRI 0x00200000 /* CPU has ULRI feature */ + +/* + * CPU ASE encodings + */ +#define MIPS_ASE_MIPS16 0x00000001 /* code compression */ +#define MIPS_ASE_MDMX 0x00000002 /* MIPS digital media extension */ +#define MIPS_ASE_MIPS3D 0x00000004 /* MIPS-3D */ +#define MIPS_ASE_SMARTMIPS 0x00000008 /* SmartMIPS */ +#define MIPS_ASE_DSP 0x00000010 /* Signal Processing ASE */ +#define MIPS_ASE_MIPSMT 0x00000020 /* CPU supports MIPS MT */ + + +#endif /* _ASM_CPU_H */ diff --git a/arch/mips/include/asm/cputime.h b/arch/mips/include/asm/cputime.h new file mode 100644 index 000000000000..c00eacbdd979 --- /dev/null +++ b/arch/mips/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __MIPS_CPUTIME_H +#define __MIPS_CPUTIME_H + +#include + +#endif /* __MIPS_CPUTIME_H */ diff --git a/arch/mips/include/asm/current.h b/arch/mips/include/asm/current.h new file mode 100644 index 000000000000..559db66b9790 --- /dev/null +++ b/arch/mips/include/asm/current.h @@ -0,0 +1,23 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2002 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_CURRENT_H +#define _ASM_CURRENT_H + +#include + +struct task_struct; + +static inline struct task_struct * get_current(void) +{ + return current_thread_info()->task; +} + +#define current get_current() + +#endif /* _ASM_CURRENT_H */ diff --git a/arch/mips/include/asm/debug.h b/arch/mips/include/asm/debug.h new file mode 100644 index 000000000000..1fd5a2b39445 --- /dev/null +++ b/arch/mips/include/asm/debug.h @@ -0,0 +1,48 @@ +/* + * Debug macros for run-time debugging. + * Turned on/off with CONFIG_RUNTIME_DEBUG option. + * + * Copyright (C) 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef _ASM_DEBUG_H +#define _ASM_DEBUG_H + + +/* + * run-time macros for catching spurious errors. Eable CONFIG_RUNTIME_DEBUG in + * kernel hacking config menu to use them. + * + * Use them as run-time debugging aid. NEVER USE THEM AS ERROR HANDLING CODE!!! + */ + +#ifdef CONFIG_RUNTIME_DEBUG + +#include + +#define db_assert(x) if (!(x)) { \ + panic("assertion failed at %s:%d: %s", __FILE__, __LINE__, #x); } +#define db_warn(x) if (!(x)) { \ + printk(KERN_WARNING "warning at %s:%d: %s", __FILE__, __LINE__, #x); } +#define db_verify(x, y) db_assert(x y) +#define db_verify_warn(x, y) db_warn(x y) +#define db_run(x) do { x; } while (0) + +#else + +#define db_assert(x) +#define db_warn(x) +#define db_verify(x, y) x +#define db_verify_warn(x, y) x +#define db_run(x) + +#endif + +#endif /* _ASM_DEBUG_H */ diff --git a/arch/mips/include/asm/dec/ecc.h b/arch/mips/include/asm/dec/ecc.h new file mode 100644 index 000000000000..707ffdbc9add --- /dev/null +++ b/arch/mips/include/asm/dec/ecc.h @@ -0,0 +1,55 @@ +/* + * include/asm-mips/dec/ecc.h + * + * ECC handling logic definitions common to DECstation/DECsystem + * 5000/200 (KN02), 5000/240 (KN03), 5000/260 (KN05) and + * DECsystem 5900 (KN03), 5900/260 (KN05) systems. + * + * Copyright (C) 2003 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MIPS_DEC_ECC_H +#define __ASM_MIPS_DEC_ECC_H + +/* + * Error Address Register bits. + * The register is r/wc -- any write clears it. + */ +#define KN0X_EAR_VALID (1<<31) /* error data valid, bus IRQ */ +#define KN0X_EAR_CPU (1<<30) /* CPU/DMA transaction */ +#define KN0X_EAR_WRITE (1<<29) /* write/read transaction */ +#define KN0X_EAR_ECCERR (1<<28) /* ECC/timeout or overrun */ +#define KN0X_EAR_RES_27 (1<<27) /* unused */ +#define KN0X_EAR_ADDRESS (0x7ffffff<<0) /* address involved */ + +/* + * Error Syndrome Register bits. + * The register is frozen when EAR.VALID is set, otherwise it records bits + * from the last memory read. The register is r/wc -- any write clears it. + */ +#define KN0X_ESR_VLDHI (1<<31) /* error data valid hi word */ +#define KN0X_ESR_CHKHI (0x7f<<24) /* check bits read from mem */ +#define KN0X_ESR_SNGHI (1<<23) /* single/double bit error */ +#define KN0X_ESR_SYNHI (0x7f<<16) /* syndrome from ECC logic */ +#define KN0X_ESR_VLDLO (1<<15) /* error data valid lo word */ +#define KN0X_ESR_CHKLO (0x7f<<8) /* check bits read from mem */ +#define KN0X_ESR_SNGLO (1<<7) /* single/double bit error */ +#define KN0X_ESR_SYNLO (0x7f<<0) /* syndrome from ECC logic */ + + +#ifndef __ASSEMBLY__ + +#include + +struct pt_regs; + +extern void dec_ecc_be_init(void); +extern int dec_ecc_be_handler(struct pt_regs *regs, int is_fixup); +extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id); +#endif + +#endif /* __ASM_MIPS_DEC_ECC_H */ diff --git a/arch/mips/include/asm/dec/interrupts.h b/arch/mips/include/asm/dec/interrupts.h new file mode 100644 index 000000000000..e10d341067c8 --- /dev/null +++ b/arch/mips/include/asm/dec/interrupts.h @@ -0,0 +1,126 @@ +/* + * Miscellaneous definitions used to initialise the interrupt vector table + * with the machine-specific interrupt routines. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997 by Paul M. Antoine. + * reworked 1998 by Harald Koerfgen. + * Copyright (C) 2001, 2002, 2003 Maciej W. Rozycki + */ + +#ifndef __ASM_DEC_INTERRUPTS_H +#define __ASM_DEC_INTERRUPTS_H + +#include +#include + + +/* + * The list of possible system devices which provide an + * interrupt. Not all devices exist on a given system. + */ +#define DEC_IRQ_CASCADE 0 /* cascade from CSR or I/O ASIC */ + +/* Ordinary interrupts */ +#define DEC_IRQ_AB_RECV 1 /* ACCESS.bus receive */ +#define DEC_IRQ_AB_XMIT 2 /* ACCESS.bus transmit */ +#define DEC_IRQ_DZ11 3 /* DZ11 (DC7085) serial */ +#define DEC_IRQ_ASC 4 /* ASC (NCR53C94) SCSI */ +#define DEC_IRQ_FLOPPY 5 /* 82077 FDC */ +#define DEC_IRQ_FPU 6 /* R3k FPU */ +#define DEC_IRQ_HALT 7 /* HALT button or from ACCESS.Bus */ +#define DEC_IRQ_ISDN 8 /* Am79C30A ISDN */ +#define DEC_IRQ_LANCE 9 /* LANCE (Am7990) Ethernet */ +#define DEC_IRQ_BUS 10 /* memory, I/O bus read/write errors */ +#define DEC_IRQ_PSU 11 /* power supply unit warning */ +#define DEC_IRQ_RTC 12 /* DS1287 RTC */ +#define DEC_IRQ_SCC0 13 /* SCC (Z85C30) serial #0 */ +#define DEC_IRQ_SCC1 14 /* SCC (Z85C30) serial #1 */ +#define DEC_IRQ_SII 15 /* SII (DC7061) SCSI */ +#define DEC_IRQ_TC0 16 /* TURBOchannel slot #0 */ +#define DEC_IRQ_TC1 17 /* TURBOchannel slot #1 */ +#define DEC_IRQ_TC2 18 /* TURBOchannel slot #2 */ +#define DEC_IRQ_TIMER 19 /* ARC periodic timer */ +#define DEC_IRQ_VIDEO 20 /* framebuffer */ + +/* I/O ASIC DMA interrupts */ +#define DEC_IRQ_ASC_MERR 21 /* ASC memory read error */ +#define DEC_IRQ_ASC_ERR 22 /* ASC page overrun */ +#define DEC_IRQ_ASC_DMA 23 /* ASC buffer pointer loaded */ +#define DEC_IRQ_FLOPPY_ERR 24 /* FDC error */ +#define DEC_IRQ_ISDN_ERR 25 /* ISDN memory read/overrun error */ +#define DEC_IRQ_ISDN_RXDMA 26 /* ISDN recv buffer pointer loaded */ +#define DEC_IRQ_ISDN_TXDMA 27 /* ISDN xmit buffer pointer loaded */ +#define DEC_IRQ_LANCE_MERR 28 /* LANCE memory read error */ +#define DEC_IRQ_SCC0A_RXERR 29 /* SCC0A (printer) receive overrun */ +#define DEC_IRQ_SCC0A_RXDMA 30 /* SCC0A receive half page */ +#define DEC_IRQ_SCC0A_TXERR 31 /* SCC0A xmit memory read/overrun */ +#define DEC_IRQ_SCC0A_TXDMA 32 /* SCC0A transmit page end */ +#define DEC_IRQ_AB_RXERR 33 /* ACCESS.bus receive overrun */ +#define DEC_IRQ_AB_RXDMA 34 /* ACCESS.bus receive half page */ +#define DEC_IRQ_AB_TXERR 35 /* ACCESS.bus xmit memory read/ovrn */ +#define DEC_IRQ_AB_TXDMA 36 /* ACCESS.bus transmit page end */ +#define DEC_IRQ_SCC1A_RXERR 37 /* SCC1A (modem) receive overrun */ +#define DEC_IRQ_SCC1A_RXDMA 38 /* SCC1A receive half page */ +#define DEC_IRQ_SCC1A_TXERR 39 /* SCC1A xmit memory read/overrun */ +#define DEC_IRQ_SCC1A_TXDMA 40 /* SCC1A transmit page end */ + +/* TC5 & TC6 are virtual slots for KN02's onboard devices */ +#define DEC_IRQ_TC5 DEC_IRQ_ASC /* virtual PMAZ-AA */ +#define DEC_IRQ_TC6 DEC_IRQ_LANCE /* virtual PMAD-AA */ + +#define DEC_NR_INTS 41 + + +/* Largest of cpu mask_nr tables. */ +#define DEC_MAX_CPU_INTS 6 +/* Largest of asic mask_nr tables. */ +#define DEC_MAX_ASIC_INTS 9 + + +/* + * CPU interrupt bits common to all systems. + */ +#define DEC_CPU_INR_FPU 7 /* R3k FPU */ +#define DEC_CPU_INR_SW1 1 /* software #1 */ +#define DEC_CPU_INR_SW0 0 /* software #0 */ + +#define DEC_CPU_IRQ_BASE MIPS_CPU_IRQ_BASE /* first IRQ assigned to CPU */ + +#define DEC_CPU_IRQ_NR(n) ((n) + DEC_CPU_IRQ_BASE) +#define DEC_CPU_IRQ_MASK(n) (1 << ((n) + CAUSEB_IP)) +#define DEC_CPU_IRQ_ALL (0xff << CAUSEB_IP) + + +#ifndef __ASSEMBLY__ + +/* + * Interrupt table structures to hide differences between systems. + */ +typedef union { int i; void *p; } int_ptr; +extern int dec_interrupt[DEC_NR_INTS]; +extern int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2]; +extern int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2]; +extern int cpu_fpu_mask; + + +/* + * Common interrupt routine prototypes for all DECStations + */ +extern void kn02_io_int(void); +extern void kn02xa_io_int(void); +extern void kn03_io_int(void); +extern void asic_dma_int(void); +extern void asic_all_int(void); +extern void kn02_all_int(void); +extern void cpu_all_int(void); + +extern void dec_intr_unimplemented(void); +extern void asic_intr_unimplemented(void); + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/mips/include/asm/dec/ioasic.h b/arch/mips/include/asm/dec/ioasic.h new file mode 100644 index 000000000000..98badd6bf22d --- /dev/null +++ b/arch/mips/include/asm/dec/ioasic.h @@ -0,0 +1,38 @@ +/* + * include/asm-mips/dec/ioasic.h + * + * DEC I/O ASIC access operations. + * + * Copyright (C) 2000, 2002, 2003 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __ASM_DEC_IOASIC_H +#define __ASM_DEC_IOASIC_H + +#include +#include + +extern spinlock_t ioasic_ssr_lock; + +extern volatile u32 *ioasic_base; + +static inline void ioasic_write(unsigned int reg, u32 v) +{ + ioasic_base[reg / 4] = v; +} + +static inline u32 ioasic_read(unsigned int reg) +{ + return ioasic_base[reg / 4]; +} + +extern void init_ioasic_irqs(int base); + +extern void dec_ioasic_clocksource_init(void); + +#endif /* __ASM_DEC_IOASIC_H */ diff --git a/arch/mips/include/asm/dec/ioasic_addrs.h b/arch/mips/include/asm/dec/ioasic_addrs.h new file mode 100644 index 000000000000..4cbc1f8a1129 --- /dev/null +++ b/arch/mips/include/asm/dec/ioasic_addrs.h @@ -0,0 +1,152 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Definitions for the address map in the JUNKIO Asic + * + * Created with Information from: + * + * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual" + * + * and the Mach Sources + * + * Copyright (C) 199x the Anonymous + * Copyright (C) 2002, 2003 Maciej W. Rozycki + */ + +#ifndef __ASM_MIPS_DEC_IOASIC_ADDRS_H +#define __ASM_MIPS_DEC_IOASIC_ADDRS_H + +#define IOASIC_SLOT_SIZE 0x00040000 + +/* + * Address ranges decoded by the I/O ASIC for onboard devices. + */ +#define IOASIC_SYS_ROM (0*IOASIC_SLOT_SIZE) /* system board ROM */ +#define IOASIC_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */ +#define IOASIC_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */ +#define IOASIC_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */ +#define IOASIC_SCC0 (4*IOASIC_SLOT_SIZE) /* SCC #0 */ +#define IOASIC_VDAC_HI (5*IOASIC_SLOT_SIZE) /* VDAC (maxine) */ +#define IOASIC_SCC1 (6*IOASIC_SLOT_SIZE) /* SCC #1 (3min, 3max+) */ +#define IOASIC_VDAC_LO (7*IOASIC_SLOT_SIZE) /* VDAC (maxine) */ +#define IOASIC_TOY (8*IOASIC_SLOT_SIZE) /* RTC */ +#define IOASIC_ISDN (9*IOASIC_SLOT_SIZE) /* ISDN (maxine) */ +#define IOASIC_ERRADDR (9*IOASIC_SLOT_SIZE) /* bus error address (3max+) */ +#define IOASIC_CHKSYN (10*IOASIC_SLOT_SIZE) /* ECC syndrome (3max+) */ +#define IOASIC_ACC_BUS (10*IOASIC_SLOT_SIZE) /* ACCESS.bus (maxine) */ +#define IOASIC_MCR (11*IOASIC_SLOT_SIZE) /* memory control (3max+) */ +#define IOASIC_FLOPPY (11*IOASIC_SLOT_SIZE) /* FDC (maxine) */ +#define IOASIC_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */ +#define IOASIC_FDC_DMA (13*IOASIC_SLOT_SIZE) /* FDC DMA (maxine) */ +#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE) /* ??? */ +#define IOASIC_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */ + + +/* + * Offsets for I/O ASIC registers + * (relative to (dec_kn_slot_base + IOASIC_IOCTL)). + */ + /* all systems */ +#define IO_REG_SCSI_DMA_P 0x00 /* SCSI DMA Pointer */ +#define IO_REG_SCSI_DMA_BP 0x10 /* SCSI DMA Buffer Pointer */ +#define IO_REG_LANCE_DMA_P 0x20 /* LANCE DMA Pointer */ +#define IO_REG_SCC0A_T_DMA_P 0x30 /* SCC0A Transmit DMA Pointer */ +#define IO_REG_SCC0A_R_DMA_P 0x40 /* SCC0A Receive DMA Pointer */ + + /* except Maxine */ +#define IO_REG_SCC1A_T_DMA_P 0x50 /* SCC1A Transmit DMA Pointer */ +#define IO_REG_SCC1A_R_DMA_P 0x60 /* SCC1A Receive DMA Pointer */ + + /* Maxine */ +#define IO_REG_AB_T_DMA_P 0x50 /* ACCESS.bus Transmit DMA Pointer */ +#define IO_REG_AB_R_DMA_P 0x60 /* ACCESS.bus Receive DMA Pointer */ +#define IO_REG_FLOPPY_DMA_P 0x70 /* Floppy DMA Pointer */ +#define IO_REG_ISDN_T_DMA_P 0x80 /* ISDN Transmit DMA Pointer */ +#define IO_REG_ISDN_T_DMA_BP 0x90 /* ISDN Transmit DMA Buffer Pointer */ +#define IO_REG_ISDN_R_DMA_P 0xa0 /* ISDN Receive DMA Pointer */ +#define IO_REG_ISDN_R_DMA_BP 0xb0 /* ISDN Receive DMA Buffer Pointer */ + + /* all systems */ +#define IO_REG_DATA_0 0xc0 /* System Data Buffer 0 */ +#define IO_REG_DATA_1 0xd0 /* System Data Buffer 1 */ +#define IO_REG_DATA_2 0xe0 /* System Data Buffer 2 */ +#define IO_REG_DATA_3 0xf0 /* System Data Buffer 3 */ + + /* all systems */ +#define IO_REG_SSR 0x100 /* System Support Register */ +#define IO_REG_SIR 0x110 /* System Interrupt Register */ +#define IO_REG_SIMR 0x120 /* System Interrupt Mask Reg. */ +#define IO_REG_SAR 0x130 /* System Address Register */ + + /* Maxine */ +#define IO_REG_ISDN_T_DATA 0x140 /* ISDN Xmit Data Register */ +#define IO_REG_ISDN_R_DATA 0x150 /* ISDN Receive Data Register */ + + /* all systems */ +#define IO_REG_LANCE_SLOT 0x160 /* LANCE I/O Slot Register */ +#define IO_REG_SCSI_SLOT 0x170 /* SCSI Slot Register */ +#define IO_REG_SCC0A_SLOT 0x180 /* SCC0A DMA Slot Register */ + + /* except Maxine */ +#define IO_REG_SCC1A_SLOT 0x190 /* SCC1A DMA Slot Register */ + + /* Maxine */ +#define IO_REG_AB_SLOT 0x190 /* ACCESS.bus DMA Slot Register */ +#define IO_REG_FLOPPY_SLOT 0x1a0 /* Floppy Slot Register */ + + /* all systems */ +#define IO_REG_SCSI_SCR 0x1b0 /* SCSI Partial-Word DMA Control */ +#define IO_REG_SCSI_SDR0 0x1c0 /* SCSI DMA Partial Word 0 */ +#define IO_REG_SCSI_SDR1 0x1d0 /* SCSI DMA Partial Word 1 */ +#define IO_REG_FCTR 0x1e0 /* Free-Running Counter */ +#define IO_REG_RES_31 0x1f0 /* unused */ + + +/* + * The upper 16 bits of the System Support Register are a part of the + * I/O ASIC's internal DMA engine and thus are common to all I/O ASIC + * machines. The exception is the Maxine, which makes use of the + * FLOPPY and ISDN bits (otherwise unused) and has a different SCC + * wiring. + */ + /* all systems */ +#define IO_SSR_SCC0A_TX_DMA_EN (1<<31) /* SCC0A transmit DMA enable */ +#define IO_SSR_SCC0A_RX_DMA_EN (1<<30) /* SCC0A receive DMA enable */ +#define IO_SSR_RES_27 (1<<27) /* unused */ +#define IO_SSR_RES_26 (1<<26) /* unused */ +#define IO_SSR_RES_25 (1<<25) /* unused */ +#define IO_SSR_RES_24 (1<<24) /* unused */ +#define IO_SSR_RES_23 (1<<23) /* unused */ +#define IO_SSR_SCSI_DMA_DIR (1<<18) /* SCSI DMA direction */ +#define IO_SSR_SCSI_DMA_EN (1<<17) /* SCSI DMA enable */ +#define IO_SSR_LANCE_DMA_EN (1<<16) /* LANCE DMA enable */ + + /* except Maxine */ +#define IO_SSR_SCC1A_TX_DMA_EN (1<<29) /* SCC1A transmit DMA enable */ +#define IO_SSR_SCC1A_RX_DMA_EN (1<<28) /* SCC1A receive DMA enable */ +#define IO_SSR_RES_22 (1<<22) /* unused */ +#define IO_SSR_RES_21 (1<<21) /* unused */ +#define IO_SSR_RES_20 (1<<20) /* unused */ +#define IO_SSR_RES_19 (1<<19) /* unused */ + + /* Maxine */ +#define IO_SSR_AB_TX_DMA_EN (1<<29) /* ACCESS.bus xmit DMA enable */ +#define IO_SSR_AB_RX_DMA_EN (1<<28) /* ACCESS.bus recv DMA enable */ +#define IO_SSR_FLOPPY_DMA_DIR (1<<22) /* Floppy DMA direction */ +#define IO_SSR_FLOPPY_DMA_EN (1<<21) /* Floppy DMA enable */ +#define IO_SSR_ISDN_TX_DMA_EN (1<<20) /* ISDN transmit DMA enable */ +#define IO_SSR_ISDN_RX_DMA_EN (1<<19) /* ISDN receive DMA enable */ + +/* + * The lower 16 bits are system-specific. Bits 15,11:8 are common and + * defined here. The rest is defined in system-specific headers. + */ +#define KN0X_IO_SSR_DIAGDN (1<<15) /* diagnostic jumper */ +#define KN0X_IO_SSR_SCC_RST (1<<11) /* ~SCC0,1 (Z85C30) reset */ +#define KN0X_IO_SSR_RTC_RST (1<<10) /* ~RTC (DS1287) reset */ +#define KN0X_IO_SSR_ASC_RST (1<<9) /* ~ASC (NCR53C94) reset */ +#define KN0X_IO_SSR_LANCE_RST (1<<8) /* ~LANCE (Am7990) reset */ + +#endif /* __ASM_MIPS_DEC_IOASIC_ADDRS_H */ diff --git a/arch/mips/include/asm/dec/ioasic_ints.h b/arch/mips/include/asm/dec/ioasic_ints.h new file mode 100644 index 000000000000..9aaa9869615f --- /dev/null +++ b/arch/mips/include/asm/dec/ioasic_ints.h @@ -0,0 +1,74 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Definitions for the interrupt related bits in the I/O ASIC + * interrupt status register (and the interrupt mask register, of course) + * + * Created with Information from: + * + * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual" + * + * and the Mach Sources + * + * Copyright (C) 199x the Anonymous + * Copyright (C) 2002 Maciej W. Rozycki + */ + +#ifndef __ASM_DEC_IOASIC_INTS_H +#define __ASM_DEC_IOASIC_INTS_H + +/* + * The upper 16 bits are a part of the I/O ASIC's internal DMA engine + * and thus are common to all I/O ASIC machines. The exception is + * the Maxine, which makes use of the FLOPPY and ISDN bits (otherwise + * unused) and has a different SCC wiring. + */ + /* all systems */ +#define IO_INR_SCC0A_TXDMA 31 /* SCC0A transmit page end */ +#define IO_INR_SCC0A_TXERR 30 /* SCC0A transmit memory read error */ +#define IO_INR_SCC0A_RXDMA 29 /* SCC0A receive half page */ +#define IO_INR_SCC0A_RXERR 28 /* SCC0A receive overrun */ +#define IO_INR_ASC_DMA 19 /* ASC buffer pointer loaded */ +#define IO_INR_ASC_ERR 18 /* ASC page overrun */ +#define IO_INR_ASC_MERR 17 /* ASC memory read error */ +#define IO_INR_LANCE_MERR 16 /* LANCE memory read error */ + + /* except Maxine */ +#define IO_INR_SCC1A_TXDMA 27 /* SCC1A transmit page end */ +#define IO_INR_SCC1A_TXERR 26 /* SCC1A transmit memory read error */ +#define IO_INR_SCC1A_RXDMA 25 /* SCC1A receive half page */ +#define IO_INR_SCC1A_RXERR 24 /* SCC1A receive overrun */ +#define IO_INR_RES_23 23 /* unused */ +#define IO_INR_RES_22 22 /* unused */ +#define IO_INR_RES_21 21 /* unused */ +#define IO_INR_RES_20 20 /* unused */ + + /* Maxine */ +#define IO_INR_AB_TXDMA 27 /* ACCESS.bus transmit page end */ +#define IO_INR_AB_TXERR 26 /* ACCESS.bus xmit memory read error */ +#define IO_INR_AB_RXDMA 25 /* ACCESS.bus receive half page */ +#define IO_INR_AB_RXERR 24 /* ACCESS.bus receive overrun */ +#define IO_INR_FLOPPY_ERR 23 /* FDC error */ +#define IO_INR_ISDN_TXDMA 22 /* ISDN xmit buffer pointer loaded */ +#define IO_INR_ISDN_RXDMA 21 /* ISDN recv buffer pointer loaded */ +#define IO_INR_ISDN_ERR 20 /* ISDN memory read/overrun error */ + +#define IO_INR_DMA 16 /* first DMA IRQ */ + +/* + * The lower 16 bits are system-specific and thus defined in + * system-specific headers. + */ + + +#define IO_IRQ_BASE 8 /* first IRQ assigned to I/O ASIC */ +#define IO_IRQ_LINES 32 /* number of I/O ASIC interrupts */ + +#define IO_IRQ_NR(n) ((n) + IO_IRQ_BASE) +#define IO_IRQ_MASK(n) (1 << (n)) +#define IO_IRQ_ALL 0x0000ffff +#define IO_IRQ_DMA 0xffff0000 + +#endif /* __ASM_DEC_IOASIC_INTS_H */ diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h new file mode 100644 index 000000000000..28fa717ac423 --- /dev/null +++ b/arch/mips/include/asm/dec/kn01.h @@ -0,0 +1,90 @@ +/* + * Hardware info about DECstation DS2100/3100 systems (otherwise known as + * pmin/pmax or KN01). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions + * are by courtesy of Chris Fraser. + * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki + */ +#ifndef __ASM_MIPS_DEC_KN01_H +#define __ASM_MIPS_DEC_KN01_H + +#define KN01_SLOT_BASE 0x10000000 +#define KN01_SLOT_SIZE 0x01000000 + +/* + * Address ranges for devices. + */ +#define KN01_PMASK (0*KN01_SLOT_SIZE) /* color plane mask */ +#define KN01_PCC (1*KN01_SLOT_SIZE) /* PCC (DC503) cursor */ +#define KN01_VDAC (2*KN01_SLOT_SIZE) /* color map */ +#define KN01_RES_3 (3*KN01_SLOT_SIZE) /* unused */ +#define KN01_RES_4 (4*KN01_SLOT_SIZE) /* unused */ +#define KN01_RES_5 (5*KN01_SLOT_SIZE) /* unused */ +#define KN01_RES_6 (6*KN01_SLOT_SIZE) /* unused */ +#define KN01_ERRADDR (7*KN01_SLOT_SIZE) /* write error address */ +#define KN01_LANCE (8*KN01_SLOT_SIZE) /* LANCE (Am7990) Ethernet */ +#define KN01_LANCE_MEM (9*KN01_SLOT_SIZE) /* LANCE buffer memory */ +#define KN01_SII (10*KN01_SLOT_SIZE) /* SII (DC7061) SCSI */ +#define KN01_SII_MEM (11*KN01_SLOT_SIZE) /* SII buffer memory */ +#define KN01_DZ11 (12*KN01_SLOT_SIZE) /* DZ11 (DC7085) serial */ +#define KN01_RTC (13*KN01_SLOT_SIZE) /* DS1287 RTC (bytes #0) */ +#define KN01_ESAR (13*KN01_SLOT_SIZE) /* MAC address (bytes #1) */ +#define KN01_CSR (14*KN01_SLOT_SIZE) /* system ctrl & status reg */ +#define KN01_SYS_ROM (15*KN01_SLOT_SIZE) /* system board ROM */ + + +/* + * Frame buffer memory address. + */ +#define KN01_VFB_MEM 0x0fc00000 + +/* + * CPU interrupt bits. + */ +#define KN01_CPU_INR_BUS 6 /* memory, I/O bus read/write errors */ +#define KN01_CPU_INR_VIDEO 6 /* PCC area detect #2 */ +#define KN01_CPU_INR_RTC 5 /* DS1287 RTC */ +#define KN01_CPU_INR_DZ11 4 /* DZ11 (DC7085) serial */ +#define KN01_CPU_INR_LANCE 3 /* LANCE (Am7990) Ethernet */ +#define KN01_CPU_INR_SII 2 /* SII (DC7061) SCSI */ + + +/* + * System Control & Status Register bits. + */ +#define KN01_CSR_MNFMOD (1<<15) /* MNFMOD manufacturing jumper */ +#define KN01_CSR_STATUS (1<<14) /* self-test result status output */ +#define KN01_CSR_PARDIS (1<<13) /* parity error disable */ +#define KN01_CSR_CRSRTST (1<<12) /* PCC test output */ +#define KN01_CSR_MONO (1<<11) /* mono/color fb SIMM installed */ +#define KN01_CSR_MEMERR (1<<10) /* write timeout error status & ack*/ +#define KN01_CSR_VINT (1<<9) /* PCC area detect #2 status & ack */ +#define KN01_CSR_TXDIS (1<<8) /* DZ11 transmit disable */ +#define KN01_CSR_VBGTRG (1<<2) /* blue DAC voltage over green (r/o) */ +#define KN01_CSR_VRGTRG (1<<1) /* red DAC voltage over green (r/o) */ +#define KN01_CSR_VRGTRB (1<<0) /* red DAC voltage over blue (r/o) */ +#define KN01_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */ + + +#ifndef __ASSEMBLY__ + +#include +#include +#include + +struct pt_regs; + +extern u16 cached_kn01_csr; +extern spinlock_t kn01_lock; + +extern void dec_kn01_be_init(void); +extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup); +extern irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id); +#endif + +#endif /* __ASM_MIPS_DEC_KN01_H */ diff --git a/arch/mips/include/asm/dec/kn02.h b/arch/mips/include/asm/dec/kn02.h new file mode 100644 index 000000000000..93430b5f4724 --- /dev/null +++ b/arch/mips/include/asm/dec/kn02.h @@ -0,0 +1,91 @@ +/* + * Hardware info about DECstation 5000/200 systems (otherwise known as + * 3max or KN02). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions + * are by courtesy of Chris Fraser. + * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki + */ +#ifndef __ASM_MIPS_DEC_KN02_H +#define __ASM_MIPS_DEC_KN02_H + +#define KN02_SLOT_BASE 0x1fc00000 +#define KN02_SLOT_SIZE 0x00080000 + +/* + * Address ranges decoded by the "system slot" logic for onboard devices. + */ +#define KN02_SYS_ROM (0*KN02_SLOT_SIZE) /* system board ROM */ +#define KN02_RES_1 (1*KN02_SLOT_SIZE) /* unused */ +#define KN02_CHKSYN (2*KN02_SLOT_SIZE) /* ECC syndrome */ +#define KN02_ERRADDR (3*KN02_SLOT_SIZE) /* bus error address */ +#define KN02_DZ11 (4*KN02_SLOT_SIZE) /* DZ11 (DC7085) serial */ +#define KN02_RTC (5*KN02_SLOT_SIZE) /* DS1287 RTC */ +#define KN02_CSR (6*KN02_SLOT_SIZE) /* system ctrl & status reg */ +#define KN02_SYS_ROM_7 (7*KN02_SLOT_SIZE) /* system board ROM (alias) */ + + +/* + * System Control & Status Register bits. + */ +#define KN02_CSR_RES_28 (0xf<<28) /* unused */ +#define KN02_CSR_PSU (1<<27) /* power supply unit warning */ +#define KN02_CSR_NVRAM (1<<26) /* ~NVRAM clear jumper */ +#define KN02_CSR_REFEVEN (1<<25) /* mem refresh bank toggle */ +#define KN02_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */ +#define KN02_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */ +#define KN02_CSR_DIAGCHK (1<<15) /* diagn/norml ECC reads */ +#define KN02_CSR_DIAGGEN (1<<14) /* diagn/norml ECC writes */ +#define KN02_CSR_CORRECT (1<<13) /* ECC correct/check */ +#define KN02_CSR_LEDIAG (1<<12) /* ECC diagn. latch strobe */ +#define KN02_CSR_TXDIS (1<<11) /* DZ11 transmit disable */ +#define KN02_CSR_BNK32M (1<<10) /* 32M/8M stride */ +#define KN02_CSR_DIAGDN (1<<9) /* DIAGDN manufact. jumper */ +#define KN02_CSR_BAUD38 (1<<8) /* DZ11 38/19kbps ext. rate */ +#define KN02_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */ +#define KN02_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */ + + +/* + * CPU interrupt bits. + */ +#define KN02_CPU_INR_RES_6 6 /* unused */ +#define KN02_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */ +#define KN02_CPU_INR_RES_4 4 /* unused */ +#define KN02_CPU_INR_RTC 3 /* DS1287 RTC */ +#define KN02_CPU_INR_CASCADE 2 /* CSR cascade */ + +/* + * CSR interrupt bits. + */ +#define KN02_CSR_INR_DZ11 7 /* DZ11 (DC7085) serial */ +#define KN02_CSR_INR_LANCE 6 /* LANCE (Am7990) Ethernet */ +#define KN02_CSR_INR_ASC 5 /* ASC (NCR53C94) SCSI */ +#define KN02_CSR_INR_RES_4 4 /* unused */ +#define KN02_CSR_INR_RES_3 3 /* unused */ +#define KN02_CSR_INR_TC2 2 /* TURBOchannel slot #2 */ +#define KN02_CSR_INR_TC1 1 /* TURBOchannel slot #1 */ +#define KN02_CSR_INR_TC0 0 /* TURBOchannel slot #0 */ + + +#define KN02_IRQ_BASE 8 /* first IRQ assigned to CSR */ +#define KN02_IRQ_LINES 8 /* number of CSR interrupts */ + +#define KN02_IRQ_NR(n) ((n) + KN02_IRQ_BASE) +#define KN02_IRQ_MASK(n) (1 << (n)) +#define KN02_IRQ_ALL 0xff + + +#ifndef __ASSEMBLY__ + +#include + +extern u32 cached_kn02_csr; +extern void init_kn02_irqs(int base); +#endif + +#endif /* __ASM_MIPS_DEC_KN02_H */ diff --git a/arch/mips/include/asm/dec/kn02ba.h b/arch/mips/include/asm/dec/kn02ba.h new file mode 100644 index 000000000000..c957a4f1b32d --- /dev/null +++ b/arch/mips/include/asm/dec/kn02ba.h @@ -0,0 +1,67 @@ +/* + * include/asm-mips/dec/kn02ba.h + * + * DECstation 5000/1xx (3min or KN02-BA) definitions. + * + * Copyright (C) 2002, 2003 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MIPS_DEC_KN02BA_H +#define __ASM_MIPS_DEC_KN02BA_H + +#include /* For common definitions. */ + +/* + * CPU interrupt bits. + */ +#define KN02BA_CPU_INR_HALT 6 /* HALT button */ +#define KN02BA_CPU_INR_CASCADE 5 /* I/O ASIC cascade */ +#define KN02BA_CPU_INR_TC2 4 /* TURBOchannel slot #2 */ +#define KN02BA_CPU_INR_TC1 3 /* TURBOchannel slot #1 */ +#define KN02BA_CPU_INR_TC0 2 /* TURBOchannel slot #0 */ + +/* + * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits. + */ +#define KN02BA_IO_INR_RES_15 15 /* unused */ +#define KN02BA_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */ +#define KN02BA_IO_INR_RES_13 13 /* unused */ +#define KN02BA_IO_INR_BUS 12 /* memory, I/O bus read/write errors */ +#define KN02BA_IO_INR_RES_11 11 /* unused */ +#define KN02BA_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */ +#define KN02BA_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */ +#define KN02BA_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */ +#define KN02BA_IO_INR_SCC1 7 /* SCC (Z85C30) serial #1 */ +#define KN02BA_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */ +#define KN02BA_IO_INR_RTC 5 /* DS1287 RTC */ +#define KN02BA_IO_INR_PSU 4 /* power supply unit warning */ +#define KN02BA_IO_INR_RES_3 3 /* unused */ +#define KN02BA_IO_INR_ASC_DATA 2 /* SCSI data ready (for PIO) */ +#define KN02BA_IO_INR_PBNC 1 /* ~HALT button debouncer */ +#define KN02BA_IO_INR_PBNO 0 /* HALT button debouncer */ + + +/* + * Memory Error Register bits. + */ +#define KN02BA_MER_RES_27 (1<<27) /* unused */ + +/* + * Memory Size Register bits. + */ +#define KN02BA_MSR_RES_17 (0x3ff<<17) /* unused */ + +/* + * I/O ASIC System Support Register bits. + */ +#define KN02BA_IO_SSR_TXDIS1 (1<<14) /* SCC1 transmit disable */ +#define KN02BA_IO_SSR_TXDIS0 (1<<13) /* SCC0 transmit disable */ +#define KN02BA_IO_SSR_RES_12 (1<<12) /* unused */ + +#define KN02BA_IO_SSR_LEDS (0xff<<0) /* ~diagnostic LEDs */ + +#endif /* __ASM_MIPS_DEC_KN02BA_H */ diff --git a/arch/mips/include/asm/dec/kn02ca.h b/arch/mips/include/asm/dec/kn02ca.h new file mode 100644 index 000000000000..92c0fe256099 --- /dev/null +++ b/arch/mips/include/asm/dec/kn02ca.h @@ -0,0 +1,79 @@ +/* + * include/asm-mips/dec/kn02ca.h + * + * Personal DECstation 5000/xx (Maxine or KN02-CA) definitions. + * + * Copyright (C) 2002, 2003 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MIPS_DEC_KN02CA_H +#define __ASM_MIPS_DEC_KN02CA_H + +#include /* For common definitions. */ + +/* + * CPU interrupt bits. + */ +#define KN02CA_CPU_INR_HALT 6 /* HALT from ACCESS.Bus */ +#define KN02CA_CPU_INR_CASCADE 5 /* I/O ASIC cascade */ +#define KN02CA_CPU_INR_BUS 4 /* memory, I/O bus read/write errors */ +#define KN02CA_CPU_INR_RTC 3 /* DS1287 RTC */ +#define KN02CA_CPU_INR_TIMER 2 /* ARC periodic timer */ + +/* + * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits. + */ +#define KN02CA_IO_INR_FLOPPY 15 /* 82077 FDC */ +#define KN02CA_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */ +#define KN02CA_IO_INR_POWERON 13 /* (*) ACCESS.Bus/power-on reset */ +#define KN02CA_IO_INR_TC0 12 /* TURBOchannel slot #0 */ +#define KN02CA_IO_INR_TIMER 12 /* ARC periodic timer (?) */ +#define KN02CA_IO_INR_ISDN 11 /* Am79C30A ISDN */ +#define KN02CA_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */ +#define KN02CA_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */ +#define KN02CA_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */ +#define KN02CA_IO_INR_HDFLOPPY 7 /* (*) HD (1.44MB) floppy status */ +#define KN02CA_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */ +#define KN02CA_IO_INR_TC1 5 /* TURBOchannel slot #1 */ +#define KN02CA_IO_INR_XDFLOPPY 4 /* (*) XD (2.88MB) floppy status */ +#define KN02CA_IO_INR_VIDEO 3 /* framebuffer */ +#define KN02CA_IO_INR_XVIDEO 2 /* ~framebuffer */ +#define KN02CA_IO_INR_AB_XMIT 1 /* ACCESS.bus transmit */ +#define KN02CA_IO_INR_AB_RECV 0 /* ACCESS.bus receive */ + + +/* + * Memory Error Register bits. + */ +#define KN02CA_MER_INTR (1<<27) /* ARC IRQ status & ack */ + +/* + * Memory Size Register bits. + */ +#define KN02CA_MSR_INTREN (1<<26) /* ARC periodic IRQ enable */ +#define KN02CA_MSR_MS10EN (1<<25) /* 10/1ms IRQ period select */ +#define KN02CA_MSR_PFORCE (0xf<<21) /* byte lane error force */ +#define KN02CA_MSR_MABEN (1<<20) /* A side VFB address enable */ +#define KN02CA_MSR_LASTBANK (0x7<<17) /* onboard RAM bank # */ + +/* + * I/O ASIC System Support Register bits. + */ +#define KN03CA_IO_SSR_RES_14 (1<<14) /* unused */ +#define KN03CA_IO_SSR_RES_13 (1<<13) /* unused */ +#define KN03CA_IO_SSR_ISDN_RST (1<<12) /* ~ISDN (Am79C30A) reset */ + +#define KN03CA_IO_SSR_FLOPPY_RST (1<<7) /* ~FDC (82077) reset */ +#define KN03CA_IO_SSR_VIDEO_RST (1<<6) /* ~framebuffer reset */ +#define KN03CA_IO_SSR_AB_RST (1<<5) /* ACCESS.bus reset */ +#define KN03CA_IO_SSR_RES_4 (1<<4) /* unused */ +#define KN03CA_IO_SSR_RES_3 (1<<4) /* unused */ +#define KN03CA_IO_SSR_RES_2 (1<<2) /* unused */ +#define KN03CA_IO_SSR_RES_1 (1<<1) /* unused */ +#define KN03CA_IO_SSR_LED (1<<0) /* power LED */ + +#endif /* __ASM_MIPS_DEC_KN02CA_H */ diff --git a/arch/mips/include/asm/dec/kn02xa.h b/arch/mips/include/asm/dec/kn02xa.h new file mode 100644 index 000000000000..b56b4577f6ef --- /dev/null +++ b/arch/mips/include/asm/dec/kn02xa.h @@ -0,0 +1,84 @@ +/* + * Hardware info common to DECstation 5000/1xx systems (otherwise + * known as 3min or kn02ba) and Personal DECstations 5000/xx ones + * (otherwise known as maxine or kn02ca). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions + * are by courtesy of Chris Fraser. + * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki + * + * These are addresses which have to be known early in the boot process. + * For other addresses refer to tc.h, ioasic_addrs.h and friends. + */ +#ifndef __ASM_MIPS_DEC_KN02XA_H +#define __ASM_MIPS_DEC_KN02XA_H + +#include + +#define KN02XA_SLOT_BASE 0x1c000000 + +/* + * Memory control ASIC registers. + */ +#define KN02XA_MER 0x0c400000 /* memory error register */ +#define KN02XA_MSR 0x0c800000 /* memory size register */ + +/* + * CPU control ASIC registers. + */ +#define KN02XA_MEM_CONF 0x0e000000 /* write timeout config */ +#define KN02XA_EAR 0x0e000004 /* error address register */ +#define KN02XA_BOOT0 0x0e000008 /* boot 0 register */ +#define KN02XA_MEM_INTR 0x0e00000c /* write err IRQ stat & ack */ + +/* + * Memory Error Register bits, common definitions. + * The rest is defined in system-specific headers. + */ +#define KN02XA_MER_RES_28 (0xf<<28) /* unused */ +#define KN02XA_MER_RES_17 (0x3ff<<17) /* unused */ +#define KN02XA_MER_PAGERR (1<<16) /* 2k page boundary error */ +#define KN02XA_MER_TRANSERR (1<<15) /* transfer length error */ +#define KN02XA_MER_PARDIS (1<<14) /* parity error disable */ +#define KN02XA_MER_SIZE (1<<13) /* r/o mirror of MSR_SIZE */ +#define KN02XA_MER_RES_12 (1<<12) /* unused */ +#define KN02XA_MER_BYTERR (0xf<<8) /* byte lane error bitmask: */ +#define KN02XA_MER_BYTERR_3 (0x8<<8) /* byte lane #3 */ +#define KN02XA_MER_BYTERR_2 (0x4<<8) /* byte lane #2 */ +#define KN02XA_MER_BYTERR_1 (0x2<<8) /* byte lane #1 */ +#define KN02XA_MER_BYTERR_0 (0x1<<8) /* byte lane #0 */ +#define KN02XA_MER_RES_0 (0xff<<0) /* unused */ + +/* + * Memory Size Register bits, common definitions. + * The rest is defined in system-specific headers. + */ +#define KN02XA_MSR_RES_27 (0x1f<<27) /* unused */ +#define KN02XA_MSR_RES_14 (0x7<<14) /* unused */ +#define KN02XA_MSR_SIZE (1<<13) /* 16M/4M stride */ +#define KN02XA_MSR_RES_0 (0x1fff<<0) /* unused */ + +/* + * Error Address Register bits. + */ +#define KN02XA_EAR_RES_29 (0x7<<29) /* unused */ +#define KN02XA_EAR_ADDRESS (0x7ffffff<<2) /* address involved */ +#define KN02XA_EAR_RES_0 (0x3<<0) /* unused */ + + +#ifndef __ASSEMBLY__ + +#include + +struct pt_regs; + +extern void dec_kn02xa_be_init(void); +extern int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup); +extern irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id); +#endif + +#endif /* __ASM_MIPS_DEC_KN02XA_H */ diff --git a/arch/mips/include/asm/dec/kn03.h b/arch/mips/include/asm/dec/kn03.h new file mode 100644 index 000000000000..edede923ffb8 --- /dev/null +++ b/arch/mips/include/asm/dec/kn03.h @@ -0,0 +1,74 @@ +/* + * Hardware info about DECstation 5000/2x0 systems (otherwise known as + * 3max+) and DECsystem 5900 systems (otherwise known as bigmax) which + * differ mechanically but are otherwise identical (both are known as + * KN03). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions + * are by courtesy of Chris Fraser. + * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki + */ +#ifndef __ASM_MIPS_DEC_KN03_H +#define __ASM_MIPS_DEC_KN03_H + +#include +#include + +#define KN03_SLOT_BASE 0x1f800000 + +/* + * CPU interrupt bits. + */ +#define KN03_CPU_INR_HALT 6 /* HALT button */ +#define KN03_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */ +#define KN03_CPU_INR_RES_4 4 /* unused */ +#define KN03_CPU_INR_RTC 3 /* DS1287 RTC */ +#define KN03_CPU_INR_CASCADE 2 /* I/O ASIC cascade */ + +/* + * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits. + */ +#define KN03_IO_INR_3MAXP 15 /* (*) 3max+/bigmax ID */ +#define KN03_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */ +#define KN03_IO_INR_TC2 13 /* TURBOchannel slot #2 */ +#define KN03_IO_INR_TC1 12 /* TURBOchannel slot #1 */ +#define KN03_IO_INR_TC0 11 /* TURBOchannel slot #0 */ +#define KN03_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */ +#define KN03_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */ +#define KN03_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */ +#define KN03_IO_INR_SCC1 7 /* SCC (Z85C30) serial #1 */ +#define KN03_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */ +#define KN03_IO_INR_RTC 5 /* DS1287 RTC */ +#define KN03_IO_INR_PSU 4 /* power supply unit warning */ +#define KN03_IO_INR_RES_3 3 /* unused */ +#define KN03_IO_INR_ASC_DATA 2 /* SCSI data ready (for PIO) */ +#define KN03_IO_INR_PBNC 1 /* ~HALT button debouncer */ +#define KN03_IO_INR_PBNO 0 /* HALT button debouncer */ + + +/* + * Memory Control Register bits. + */ +#define KN03_MCR_RES_16 (0xffff<<16) /* unused */ +#define KN03_MCR_DIAGCHK (1<<15) /* diagn/norml ECC reads */ +#define KN03_MCR_DIAGGEN (1<<14) /* diagn/norml ECC writes */ +#define KN03_MCR_CORRECT (1<<13) /* ECC correct/check */ +#define KN03_MCR_RES_11 (0x3<<12) /* unused */ +#define KN03_MCR_BNK32M (1<<10) /* 32M/8M stride */ +#define KN03_MCR_RES_7 (0x7<<7) /* unused */ +#define KN03_MCR_CHECK (0x7f<<0) /* diagnostic check bits */ + +/* + * I/O ASIC System Support Register bits. + */ +#define KN03_IO_SSR_TXDIS1 (1<<14) /* SCC1 transmit disable */ +#define KN03_IO_SSR_TXDIS0 (1<<13) /* SCC0 transmit disable */ +#define KN03_IO_SSR_RES_12 (1<<12) /* unused */ + +#define KN03_IO_SSR_LEDS (0xff<<0) /* ~diagnostic LEDs */ + +#endif /* __ASM_MIPS_DEC_KN03_H */ diff --git a/arch/mips/include/asm/dec/kn05.h b/arch/mips/include/asm/dec/kn05.h new file mode 100644 index 000000000000..56d22dc8803a --- /dev/null +++ b/arch/mips/include/asm/dec/kn05.h @@ -0,0 +1,76 @@ +/* + * include/asm-mips/dec/kn05.h + * + * DECstation/DECsystem 5000/260 (4max+ or KN05), 5000/150 (4min + * or KN04-BA), Personal DECstation/DECsystem 5000/50 (4maxine or + * KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC + * definitions. + * + * Copyright (C) 2002, 2003, 2005, 2008 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * WARNING! All this information is pure guesswork based on the + * ROM. It is provided here in hope it will give someone some + * food for thought. No documentation for the KN05 nor the KN04 + * module has been located so far. + */ +#ifndef __ASM_MIPS_DEC_KN05_H +#define __ASM_MIPS_DEC_KN05_H + +#include + +/* + * The oncard MB (Memory Buffer) ASIC provides an additional address + * decoder. Certain address ranges within the "high" 16 slots are + * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA. + * Others are handled locally. "Low" slots are always passed. + */ +#define KN4K_SLOT_BASE 0x1fc00000 + +#define KN4K_MB_ROM (0*IOASIC_SLOT_SIZE) /* KN05/KN04 card ROM */ +#define KN4K_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */ +#define KN4K_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */ +#define KN4K_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */ +#define KN4K_MB_INT (4*IOASIC_SLOT_SIZE) /* MB interrupt register */ +#define KN4K_MB_EA (5*IOASIC_SLOT_SIZE) /* MB error address? */ +#define KN4K_MB_EC (6*IOASIC_SLOT_SIZE) /* MB error ??? */ +#define KN4K_MB_CSR (7*IOASIC_SLOT_SIZE) /* MB control & status */ +#define KN4K_RES_08 (8*IOASIC_SLOT_SIZE) /* unused? */ +#define KN4K_RES_09 (9*IOASIC_SLOT_SIZE) /* unused? */ +#define KN4K_RES_10 (10*IOASIC_SLOT_SIZE) /* unused? */ +#define KN4K_RES_11 (11*IOASIC_SLOT_SIZE) /* unused? */ +#define KN4K_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */ +#define KN4K_RES_13 (13*IOASIC_SLOT_SIZE) /* unused? */ +#define KN4K_RES_14 (14*IOASIC_SLOT_SIZE) /* unused? */ +#define KN4K_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */ + +/* + * Bits for the MB interrupt register. + * The register appears read-only. + */ +#define KN4K_MB_INT_TC (1<<0) /* TURBOchannel? */ +#define KN4K_MB_INT_RTC (1<<1) /* RTC? */ +#define KN4K_MB_INT_MT (1<<3) /* I/O ASIC cascade */ + +/* + * Bits for the MB control & status register. + * Set to 0x00bf8001 for KN05 and to 0x003f8000 for KN04 by the firmware. + */ +#define KN4K_MB_CSR_PF (1<<0) /* PreFetching enable? */ +#define KN4K_MB_CSR_F (1<<1) /* ??? */ +#define KN4K_MB_CSR_ECC (0xff<<2) /* ??? */ +#define KN4K_MB_CSR_OD (1<<10) /* ??? */ +#define KN4K_MB_CSR_CP (1<<11) /* ??? */ +#define KN4K_MB_CSR_UNC (1<<12) /* ??? */ +#define KN4K_MB_CSR_IM (1<<13) /* ??? */ +#define KN4K_MB_CSR_NC (1<<14) /* ??? */ +#define KN4K_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */ +#define KN4K_MB_CSR_MSK (0x1f<<16) /* CPU Int[4:0] mask */ +#define KN4K_MB_CSR_FW (1<<21) /* ??? */ +#define KN4K_MB_CSR_W (1<<31) /* ??? */ + +#endif /* __ASM_MIPS_DEC_KN05_H */ diff --git a/arch/mips/include/asm/dec/kn230.h b/arch/mips/include/asm/dec/kn230.h new file mode 100644 index 000000000000..ff1bf17de8d8 --- /dev/null +++ b/arch/mips/include/asm/dec/kn230.h @@ -0,0 +1,26 @@ +/* + * include/asm-mips/dec/kn230.h + * + * DECsystem 5100 (MIPSmate or KN230) definitions. + * + * Copyright (C) 2002, 2003 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MIPS_DEC_KN230_H +#define __ASM_MIPS_DEC_KN230_H + +/* + * CPU interrupt bits. + */ +#define KN230_CPU_INR_HALT 6 /* HALT button */ +#define KN230_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */ +#define KN230_CPU_INR_RTC 4 /* DS1287 RTC */ +#define KN230_CPU_INR_SII 3 /* SII (DC7061) SCSI */ +#define KN230_CPU_INR_LANCE 3 /* LANCE (Am7990) Ethernet */ +#define KN230_CPU_INR_DZ11 2 /* DZ11 (DC7085) serial */ + +#endif /* __ASM_MIPS_DEC_KN230_H */ diff --git a/arch/mips/include/asm/dec/machtype.h b/arch/mips/include/asm/dec/machtype.h new file mode 100644 index 000000000000..a6ecdebc430a --- /dev/null +++ b/arch/mips/include/asm/dec/machtype.h @@ -0,0 +1,27 @@ +/* + * Various machine type macros + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1998, 2000 Harald Koerfgen + */ + +#ifndef __ASM_DEC_MACHTYPE_H +#define __ASM_DEC_MACHTYPE_H + +#include + +#define TURBOCHANNEL (mips_machtype == MACH_DS5000_200 || \ + mips_machtype == MACH_DS5000_1XX || \ + mips_machtype == MACH_DS5000_XX || \ + mips_machtype == MACH_DS5000_2X0 || \ + mips_machtype == MACH_DS5900) + +#define IOASIC (mips_machtype == MACH_DS5000_1XX || \ + mips_machtype == MACH_DS5000_XX || \ + mips_machtype == MACH_DS5000_2X0 || \ + mips_machtype == MACH_DS5900) + +#endif diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h new file mode 100644 index 000000000000..b9c8203688d5 --- /dev/null +++ b/arch/mips/include/asm/dec/prom.h @@ -0,0 +1,174 @@ +/* + * include/asm-mips/dec/prom.h + * + * DECstation PROM interface. + * + * Copyright (C) 2002 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based on arch/mips/dec/prom/prom.h by the Anonymous. + */ +#ifndef _ASM_DEC_PROM_H +#define _ASM_DEC_PROM_H + +#include + +#include + +/* + * PMAX/3MAX PROM entry points for DS2100/3100's and DS5000/2xx's. + * Many of these will work for MIPSen as well! + */ +#define VEC_RESET (u64 *)CKSEG1ADDR(0x1fc00000) + /* Prom base address */ + +#define PMAX_PROM_ENTRY(x) (VEC_RESET + (x)) /* Prom jump table */ + +#define PMAX_PROM_HALT PMAX_PROM_ENTRY(2) /* valid on MIPSen */ +#define PMAX_PROM_AUTOBOOT PMAX_PROM_ENTRY(5) /* valid on MIPSen */ +#define PMAX_PROM_OPEN PMAX_PROM_ENTRY(6) +#define PMAX_PROM_READ PMAX_PROM_ENTRY(7) +#define PMAX_PROM_CLOSE PMAX_PROM_ENTRY(10) +#define PMAX_PROM_LSEEK PMAX_PROM_ENTRY(11) +#define PMAX_PROM_GETCHAR PMAX_PROM_ENTRY(12) +#define PMAX_PROM_PUTCHAR PMAX_PROM_ENTRY(13) /* 12 on MIPSen */ +#define PMAX_PROM_GETS PMAX_PROM_ENTRY(15) +#define PMAX_PROM_PRINTF PMAX_PROM_ENTRY(17) +#define PMAX_PROM_GETENV PMAX_PROM_ENTRY(33) /* valid on MIPSen */ + + +/* + * Magic number indicating REX PROM available on DECstation. Found in + * register a2 on transfer of control to program from PROM. + */ +#define REX_PROM_MAGIC 0x30464354 + +#ifdef CONFIG_64BIT + +#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */ + +#else /* !CONFIG_64BIT */ + +#define prom_is_rex(magic) ((magic) == REX_PROM_MAGIC) + +#endif /* !CONFIG_64BIT */ + + +/* + * 3MIN/MAXINE PROM entry points for DS5000/1xx's, DS5000/xx's and + * DS5000/2x0. + */ +#define REX_PROM_GETBITMAP 0x84/4 /* get mem bitmap */ +#define REX_PROM_GETCHAR 0x24/4 /* getch() */ +#define REX_PROM_GETENV 0x64/4 /* get env. variable */ +#define REX_PROM_GETSYSID 0x80/4 /* get system id */ +#define REX_PROM_GETTCINFO 0xa4/4 +#define REX_PROM_PRINTF 0x30/4 /* printf() */ +#define REX_PROM_SLOTADDR 0x6c/4 /* slotaddr */ +#define REX_PROM_BOOTINIT 0x54/4 /* open() */ +#define REX_PROM_BOOTREAD 0x58/4 /* read() */ +#define REX_PROM_CLEARCACHE 0x7c/4 + + +/* + * Used by rex_getbitmap(). + */ +typedef struct { + int pagesize; + unsigned char bitmap[0]; +} memmap; + + +/* + * Function pointers as read from a PROM's callback vector. + */ +extern int (*__rex_bootinit)(void); +extern int (*__rex_bootread)(void); +extern int (*__rex_getbitmap)(memmap *); +extern unsigned long *(*__rex_slot_address)(int); +extern void *(*__rex_gettcinfo)(void); +extern int (*__rex_getsysid)(void); +extern void (*__rex_clear_cache)(void); + +extern int (*__prom_getchar)(void); +extern char *(*__prom_getenv)(char *); +extern int (*__prom_printf)(char *, ...); + +extern int (*__pmax_open)(char*, int); +extern int (*__pmax_lseek)(int, long, int); +extern int (*__pmax_read)(int, void *, int); +extern int (*__pmax_close)(int); + + +#ifdef CONFIG_64BIT + +/* + * On MIPS64 we have to call PROM functions via a helper + * dispatcher to accomodate ABI incompatibilities. + */ +#define __DEC_PROM_O32(fun, arg) fun arg __asm__(#fun); \ + __asm__(#fun " = call_o32") + +int __DEC_PROM_O32(_rex_bootinit, (int (*)(void))); +int __DEC_PROM_O32(_rex_bootread, (int (*)(void))); +int __DEC_PROM_O32(_rex_getbitmap, (int (*)(memmap *), memmap *)); +unsigned long *__DEC_PROM_O32(_rex_slot_address, + (unsigned long *(*)(int), int)); +void *__DEC_PROM_O32(_rex_gettcinfo, (void *(*)(void))); +int __DEC_PROM_O32(_rex_getsysid, (int (*)(void))); +void __DEC_PROM_O32(_rex_clear_cache, (void (*)(void))); + +int __DEC_PROM_O32(_prom_getchar, (int (*)(void))); +char *__DEC_PROM_O32(_prom_getenv, (char *(*)(char *), char *)); +int __DEC_PROM_O32(_prom_printf, (int (*)(char *, ...), char *, ...)); + + +#define rex_bootinit() _rex_bootinit(__rex_bootinit) +#define rex_bootread() _rex_bootread(__rex_bootread) +#define rex_getbitmap(x) _rex_getbitmap(__rex_getbitmap, x) +#define rex_slot_address(x) _rex_slot_address(__rex_slot_address, x) +#define rex_gettcinfo() _rex_gettcinfo(__rex_gettcinfo) +#define rex_getsysid() _rex_getsysid(__rex_getsysid) +#define rex_clear_cache() _rex_clear_cache(__rex_clear_cache) + +#define prom_getchar() _prom_getchar(__prom_getchar) +#define prom_getenv(x) _prom_getenv(__prom_getenv, x) +#define prom_printf(x...) _prom_printf(__prom_printf, x) + +#else /* !CONFIG_64BIT */ + +/* + * On plain MIPS we just call PROM functions directly. + */ +#define rex_bootinit __rex_bootinit +#define rex_bootread __rex_bootread +#define rex_getbitmap __rex_getbitmap +#define rex_slot_address __rex_slot_address +#define rex_gettcinfo __rex_gettcinfo +#define rex_getsysid __rex_getsysid +#define rex_clear_cache __rex_clear_cache + +#define prom_getchar __prom_getchar +#define prom_getenv __prom_getenv +#define prom_printf __prom_printf + +#define pmax_open __pmax_open +#define pmax_lseek __pmax_lseek +#define pmax_read __pmax_read +#define pmax_close __pmax_close + +#endif /* !CONFIG_64BIT */ + + +extern void prom_meminit(u32); +extern void prom_identify_arch(u32); +extern void prom_init_cmdline(s32, s32 *, u32); + +extern void register_prom_console(void); +extern void unregister_prom_console(void); + +#endif /* _ASM_DEC_PROM_H */ diff --git a/arch/mips/include/asm/dec/system.h b/arch/mips/include/asm/dec/system.h new file mode 100644 index 000000000000..b2afaccd6831 --- /dev/null +++ b/arch/mips/include/asm/dec/system.h @@ -0,0 +1,19 @@ +/* + * include/asm-mips/dec/system.h + * + * Generic DECstation/DECsystem bits. + * + * Copyright (C) 2005, 2006 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_DEC_SYSTEM_H +#define __ASM_DEC_SYSTEM_H + +extern unsigned long dec_kn_slot_base, dec_kn_slot_size; +extern int dec_tc_bus; + +#endif /* __ASM_DEC_SYSTEM_H */ diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h new file mode 100644 index 000000000000..b0bccd2c4ed5 --- /dev/null +++ b/arch/mips/include/asm/delay.h @@ -0,0 +1,112 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 by Waldorf Electronics + * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki + */ +#ifndef _ASM_DELAY_H +#define _ASM_DELAY_H + +#include +#include + +#include +#include + +static inline void __delay(unsigned long loops) +{ + if (sizeof(long) == 4) + __asm__ __volatile__ ( + " .set noreorder \n" + " .align 3 \n" + "1: bnez %0, 1b \n" + " subu %0, 1 \n" + " .set reorder \n" + : "=r" (loops) + : "0" (loops)); + else if (sizeof(long) == 8 && !DADDI_WAR) + __asm__ __volatile__ ( + " .set noreorder \n" + " .align 3 \n" + "1: bnez %0, 1b \n" + " dsubu %0, 1 \n" + " .set reorder \n" + : "=r" (loops) + : "0" (loops)); + else if (sizeof(long) == 8 && DADDI_WAR) + __asm__ __volatile__ ( + " .set noreorder \n" + " .align 3 \n" + "1: bnez %0, 1b \n" + " dsubu %0, %2 \n" + " .set reorder \n" + : "=r" (loops) + : "0" (loops), "r" (1)); +} + + +/* + * Division by multiplication: you don't have to worry about + * loss of precision. + * + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ + +static inline void __udelay(unsigned long usecs, unsigned long lpj) +{ + unsigned long hi, lo; + + /* + * The rates of 128 is rounded wrongly by the catchall case + * for 64-bit. Excessive precission? Probably ... + */ +#if defined(CONFIG_64BIT) && (HZ == 128) + usecs *= 0x0008637bd05af6c7UL; /* 2**64 / (1000000 / HZ) */ +#elif defined(CONFIG_64BIT) + usecs *= (0x8000000000000000UL / (500000 / HZ)); +#else /* 32-bit junk follows here */ + usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) + + 0x80000000ULL) >> 32); +#endif + + if (sizeof(long) == 4) + __asm__("multu\t%2, %3" + : "=h" (usecs), "=l" (lo) + : "r" (usecs), "r" (lpj) + : GCC_REG_ACCUM); + else if (sizeof(long) == 8 && !R4000_WAR) + __asm__("dmultu\t%2, %3" + : "=h" (usecs), "=l" (lo) + : "r" (usecs), "r" (lpj) + : GCC_REG_ACCUM); + else if (sizeof(long) == 8 && R4000_WAR) + __asm__("dmultu\t%3, %4\n\tmfhi\t%0" + : "=r" (usecs), "=h" (hi), "=l" (lo) + : "r" (usecs), "r" (lpj) + : GCC_REG_ACCUM); + + __delay(usecs); +} + +#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val + +#define udelay(usecs) __udelay((usecs), __udelay_val) + +/* make sure "usecs *= ..." in udelay do not overflow. */ +#if HZ >= 1000 +#define MAX_UDELAY_MS 1 +#elif HZ <= 200 +#define MAX_UDELAY_MS 5 +#else +#define MAX_UDELAY_MS (1000 / HZ) +#endif + +#endif /* _ASM_DELAY_H */ diff --git a/arch/mips/include/asm/device.h b/arch/mips/include/asm/device.h new file mode 100644 index 000000000000..d8f9872b0e2d --- /dev/null +++ b/arch/mips/include/asm/device.h @@ -0,0 +1,7 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include + diff --git a/arch/mips/include/asm/div64.h b/arch/mips/include/asm/div64.h new file mode 100644 index 000000000000..d1d699105c11 --- /dev/null +++ b/arch/mips/include/asm/div64.h @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2000, 2004 Maciej W. Rozycki + * Copyright (C) 2003, 07 Ralf Baechle (ralf@linux-mips.org) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef _ASM_DIV64_H +#define _ASM_DIV64_H + +#include + +#if (_MIPS_SZLONG == 32) + +#include + +/* + * No traps on overflows for any of these... + */ + +#define do_div64_32(res, high, low, base) ({ \ + unsigned long __quot32, __mod32; \ + unsigned long __cf, __tmp, __tmp2, __i; \ + \ + __asm__(".set push\n\t" \ + ".set noat\n\t" \ + ".set noreorder\n\t" \ + "move %2, $0\n\t" \ + "move %3, $0\n\t" \ + "b 1f\n\t" \ + " li %4, 0x21\n" \ + "0:\n\t" \ + "sll $1, %0, 0x1\n\t" \ + "srl %3, %0, 0x1f\n\t" \ + "or %0, $1, %5\n\t" \ + "sll %1, %1, 0x1\n\t" \ + "sll %2, %2, 0x1\n" \ + "1:\n\t" \ + "bnez %3, 2f\n\t" \ + " sltu %5, %0, %z6\n\t" \ + "bnez %5, 3f\n" \ + "2:\n\t" \ + " addiu %4, %4, -1\n\t" \ + "subu %0, %0, %z6\n\t" \ + "addiu %2, %2, 1\n" \ + "3:\n\t" \ + "bnez %4, 0b\n\t" \ + " srl %5, %1, 0x1f\n\t" \ + ".set pop" \ + : "=&r" (__mod32), "=&r" (__tmp), \ + "=&r" (__quot32), "=&r" (__cf), \ + "=&r" (__i), "=&r" (__tmp2) \ + : "Jr" (base), "0" (high), "1" (low)); \ + \ + (res) = __quot32; \ + __mod32; }) + +#define do_div(n, base) ({ \ + unsigned long long __quot; \ + unsigned long __mod; \ + unsigned long long __div; \ + unsigned long __upper, __low, __high, __base; \ + \ + __div = (n); \ + __base = (base); \ + \ + __high = __div >> 32; \ + __low = __div; \ + __upper = __high; \ + \ + if (__high) \ + __asm__("divu $0, %z2, %z3" \ + : "=h" (__upper), "=l" (__high) \ + : "Jr" (__high), "Jr" (__base) \ + : GCC_REG_ACCUM); \ + \ + __mod = do_div64_32(__low, __upper, __low, __base); \ + \ + __quot = __high; \ + __quot = __quot << 32 | __low; \ + (n) = __quot; \ + __mod; }) + +#endif /* (_MIPS_SZLONG == 32) */ + +#if (_MIPS_SZLONG == 64) + +/* + * Hey, we're already 64-bit, no + * need to play games.. + */ +#define do_div(n, base) ({ \ + unsigned long __quot; \ + unsigned int __mod; \ + unsigned long __div; \ + unsigned int __base; \ + \ + __div = (n); \ + __base = (base); \ + \ + __mod = __div % __base; \ + __quot = __div / __base; \ + \ + (n) = __quot; \ + __mod; }) + +#endif /* (_MIPS_SZLONG == 64) */ + +#endif /* _ASM_DIV64_H */ diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h new file mode 100644 index 000000000000..c64afb40cd06 --- /dev/null +++ b/arch/mips/include/asm/dma-mapping.h @@ -0,0 +1,81 @@ +#ifndef _ASM_DMA_MAPPING_H +#define _ASM_DMA_MAPPING_H + +#include +#include + +void *dma_alloc_noncoherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + +void dma_free_noncoherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction); +extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction); +extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction); +extern dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, enum dma_data_direction direction); +extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction direction); +extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, enum dma_data_direction direction); +extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction); +extern void dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, size_t size, enum dma_data_direction direction); +extern void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, unsigned long offset, size_t size, + enum dma_data_direction direction); +extern void dma_sync_single_range_for_device(struct device *dev, + dma_addr_t dma_handle, unsigned long offset, size_t size, + enum dma_data_direction direction); +extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction); +extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction); +extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr); +extern int dma_supported(struct device *dev, u64 mask); + +static inline int +dma_set_mask(struct device *dev, u64 mask) +{ + if(!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; + + return 0; +} + +static inline int +dma_get_cache_alignment(void) +{ + /* XXX Largest on any MIPS */ + return 128; +} + +extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr); + +extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction); + +#if 0 +#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY + +extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags); +extern void dma_release_declared_memory(struct device *dev); +extern void * dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size); +#endif + +#endif /* _ASM_DMA_MAPPING_H */ diff --git a/arch/mips/include/asm/dma.h b/arch/mips/include/asm/dma.h new file mode 100644 index 000000000000..1353c81065d1 --- /dev/null +++ b/arch/mips/include/asm/dma.h @@ -0,0 +1,315 @@ +/* + * linux/include/asm/dma.h: Defines for using and allocating dma channels. + * Written by Hennus Bergman, 1992. + * High DMA channel support & info by Hannu Savolainen + * and John Boyd, Nov. 1992. + * + * NOTE: all this is true *only* for ISA/EISA expansions on Mips boards + * and can only be used for expansion cards. Onboard DMA controllers, such + * as the R4030 on Jazz boards behave totally different! + */ + +#ifndef _ASM_DMA_H +#define _ASM_DMA_H + +#include /* need byte IO */ +#include /* And spinlocks */ +#include +#include + + +#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER +#define dma_outb outb_p +#else +#define dma_outb outb +#endif + +#define dma_inb inb + +/* + * NOTES about DMA transfers: + * + * controller 1: channels 0-3, byte operations, ports 00-1F + * controller 2: channels 4-7, word operations, ports C0-DF + * + * - ALL registers are 8 bits only, regardless of transfer size + * - channel 4 is not used - cascades 1 into 2. + * - channels 0-3 are byte - addresses/counts are for physical bytes + * - channels 5-7 are word - addresses/counts are for physical words + * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries + * - transfer count loaded to registers is 1 less than actual count + * - controller 2 offsets are all even (2x offsets for controller 1) + * - page registers for 5-7 don't use data bit 0, represent 128K pages + * - page registers for 0-3 use bit 0, represent 64K pages + * + * DMA transfers are limited to the lower 16MB of _physical_ memory. + * Note that addresses loaded into registers must be _physical_ addresses, + * not logical addresses (which may differ if paging is active). + * + * Address mapping for channels 0-3: + * + * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * P7 ... P0 A7 ... A0 A7 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Address mapping for channels 5-7: + * + * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) + * | ... | \ \ ... \ \ \ ... \ \ + * | ... | \ \ ... \ \ \ ... \ (not used) + * | ... | \ \ ... \ \ \ ... \ + * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses + * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at + * the hardware level, so odd-byte transfers aren't possible). + * + * Transfer count (_not # bytes_) is limited to 64K, represented as actual + * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, + * and up to 128K bytes may be transferred on channels 5-7 in one operation. + * + */ + +#ifndef CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN +#define MAX_DMA_CHANNELS 8 +#endif + +/* + * The maximum address in KSEG0 that we can perform a DMA transfer to on this + * platform. This describes only the PC style part of the DMA logic like on + * Deskstations or Acer PICA but not the much more versatile DMA logic used + * for the local devices on Acer PICA or Magnums. + */ +#if defined(CONFIG_SGI_IP22) || defined(CONFIG_SGI_IP28) +/* don't care; ISA bus master won't work, ISA slave DMA supports 32bit addr */ +#define MAX_DMA_ADDRESS PAGE_OFFSET +#else +#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x01000000) +#endif +#define MAX_DMA_PFN PFN_DOWN(virt_to_phys((void *)MAX_DMA_ADDRESS)) +#define MAX_DMA32_PFN (1UL << (32 - PAGE_SHIFT)) + +/* 8237 DMA controllers */ +#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ +#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ + +/* DMA controller registers */ +#define DMA1_CMD_REG 0x08 /* command register (w) */ +#define DMA1_STAT_REG 0x08 /* status register (r) */ +#define DMA1_REQ_REG 0x09 /* request register (w) */ +#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ +#define DMA1_MODE_REG 0x0B /* mode register (w) */ +#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ +#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ +#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ +#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ +#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ + +#define DMA2_CMD_REG 0xD0 /* command register (w) */ +#define DMA2_STAT_REG 0xD0 /* status register (r) */ +#define DMA2_REQ_REG 0xD2 /* request register (w) */ +#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ +#define DMA2_MODE_REG 0xD6 /* mode register (w) */ +#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ +#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ +#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ +#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ +#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ + +#define DMA_ADDR_0 0x00 /* DMA address registers */ +#define DMA_ADDR_1 0x02 +#define DMA_ADDR_2 0x04 +#define DMA_ADDR_3 0x06 +#define DMA_ADDR_4 0xC0 +#define DMA_ADDR_5 0xC4 +#define DMA_ADDR_6 0xC8 +#define DMA_ADDR_7 0xCC + +#define DMA_CNT_0 0x01 /* DMA count registers */ +#define DMA_CNT_1 0x03 +#define DMA_CNT_2 0x05 +#define DMA_CNT_3 0x07 +#define DMA_CNT_4 0xC2 +#define DMA_CNT_5 0xC6 +#define DMA_CNT_6 0xCA +#define DMA_CNT_7 0xCE + +#define DMA_PAGE_0 0x87 /* DMA page registers */ +#define DMA_PAGE_1 0x83 +#define DMA_PAGE_2 0x81 +#define DMA_PAGE_3 0x82 +#define DMA_PAGE_5 0x8B +#define DMA_PAGE_6 0x89 +#define DMA_PAGE_7 0x8A + +#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ +#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ +#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ + +#define DMA_AUTOINIT 0x10 + +extern spinlock_t dma_spin_lock; + +static __inline__ unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static __inline__ void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(dmanr, DMA1_MASK_REG); + else + dma_outb(dmanr & 3, DMA2_MASK_REG); +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(dmanr | 4, DMA1_MASK_REG); + else + dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while holding the DMA lock ! --- + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ + if (dmanr<=3) + dma_outb(0, DMA1_CLEAR_FF_REG); + else + dma_outb(0, DMA2_CLEAR_FF_REG); +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + if (dmanr<=3) + dma_outb(mode | dmanr, DMA1_MODE_REG); + else + dma_outb(mode | (dmanr&3), DMA2_MODE_REG); +} + +/* Set only the page register bits of the transfer address. + * This is used for successive transfers when we know the contents of + * the lower 16 bits of the DMA current address register, but a 64k boundary + * may have been crossed. + */ +static __inline__ void set_dma_page(unsigned int dmanr, char pagenr) +{ + switch(dmanr) { + case 0: + dma_outb(pagenr, DMA_PAGE_0); + break; + case 1: + dma_outb(pagenr, DMA_PAGE_1); + break; + case 2: + dma_outb(pagenr, DMA_PAGE_2); + break; + case 3: + dma_outb(pagenr, DMA_PAGE_3); + break; + case 5: + dma_outb(pagenr & 0xfe, DMA_PAGE_5); + break; + case 6: + dma_outb(pagenr & 0xfe, DMA_PAGE_6); + break; + case 7: + dma_outb(pagenr & 0xfe, DMA_PAGE_7); + break; + } +} + + +/* Set transfer address & page bits for specific DMA channel. + * Assumes dma flipflop is clear. + */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + set_dma_page(dmanr, a>>16); + if (dmanr <= 3) { + dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); + dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); + } else { + dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); + dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); + } +} + + +/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for + * a specific DMA channel. + * You must ensure the parameters are valid. + * NOTE: from a manual: "the number of transfers is one more + * than the initial word count"! This is taken into account. + * Assumes dma flip-flop is clear. + * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + count--; + if (dmanr <= 3) { + dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); + dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); + } else { + dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); + dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); + } +} + + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + * + * Assumes DMA flip-flop is clear. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE + : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; + + /* using short to get 16-bit wrap around */ + unsigned short count; + + count = 1 + dma_inb(io_port); + count += dma_inb(io_port) << 8; + + return (dmanr<=3)? count : (count<<1); +} + + +/* These are in kernel/dma.c: */ +extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ +extern void free_dma(unsigned int dmanr); /* release it again */ + +/* From PCI */ + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* _ASM_DMA_H */ diff --git a/arch/mips/include/asm/ds1286.h b/arch/mips/include/asm/ds1286.h new file mode 100644 index 000000000000..6983b6ff0af3 --- /dev/null +++ b/arch/mips/include/asm/ds1286.h @@ -0,0 +1,15 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Machine dependent access functions for RTC registers. + * + * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef _ASM_DS1286_H +#define _ASM_DS1286_H + +#include + +#endif /* _ASM_DS1286_H */ diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h new file mode 100644 index 000000000000..ba1702e86931 --- /dev/null +++ b/arch/mips/include/asm/ds1287.h @@ -0,0 +1,27 @@ +/* + * DS1287 timer functions. + * + * Copyright (C) 2008 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef __ASM_DS1287_H +#define __ASM_DS1287_H + +extern int ds1287_timer_state(void); +extern void ds1287_set_base_clock(unsigned int clock); +extern int ds1287_clockevent_init(int irq); + +#endif diff --git a/arch/mips/include/asm/dsp.h b/arch/mips/include/asm/dsp.h new file mode 100644 index 000000000000..e9bfc0813c72 --- /dev/null +++ b/arch/mips/include/asm/dsp.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2005 Mips Technologies + * Author: Chris Dearman, chris@mips.com derived from fpu.h + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_DSP_H +#define _ASM_DSP_H + +#include +#include +#include +#include + +#define DSP_DEFAULT 0x00000000 +#define DSP_MASK 0x3ff + +#define __enable_dsp_hazard() \ +do { \ + asm("_ehb"); \ +} while (0) + +static inline void __init_dsp(void) +{ + mthi1(0); + mtlo1(0); + mthi2(0); + mtlo2(0); + mthi3(0); + mtlo3(0); + wrdsp(DSP_DEFAULT, DSP_MASK); +} + +static inline void init_dsp(void) +{ + if (cpu_has_dsp) + __init_dsp(); +} + +#define __save_dsp(tsk) \ +do { \ + tsk->thread.dsp.dspr[0] = mfhi1(); \ + tsk->thread.dsp.dspr[1] = mflo1(); \ + tsk->thread.dsp.dspr[2] = mfhi2(); \ + tsk->thread.dsp.dspr[3] = mflo2(); \ + tsk->thread.dsp.dspr[4] = mfhi3(); \ + tsk->thread.dsp.dspr[5] = mflo3(); \ + tsk->thread.dsp.dspcontrol = rddsp(DSP_MASK); \ +} while (0) + +#define save_dsp(tsk) \ +do { \ + if (cpu_has_dsp) \ + __save_dsp(tsk); \ +} while (0) + +#define __restore_dsp(tsk) \ +do { \ + mthi1(tsk->thread.dsp.dspr[0]); \ + mtlo1(tsk->thread.dsp.dspr[1]); \ + mthi2(tsk->thread.dsp.dspr[2]); \ + mtlo2(tsk->thread.dsp.dspr[3]); \ + mthi3(tsk->thread.dsp.dspr[4]); \ + mtlo3(tsk->thread.dsp.dspr[5]); \ + wrdsp(tsk->thread.dsp.dspcontrol, DSP_MASK); \ +} while (0) + +#define restore_dsp(tsk) \ +do { \ + if (cpu_has_dsp) \ + __restore_dsp(tsk); \ +} while (0) + +#define __get_dsp_regs(tsk) \ +({ \ + if (tsk == current) \ + __save_dsp(current); \ + \ + tsk->thread.dsp.dspr; \ +}) + +#endif /* _ASM_DSP_H */ diff --git a/arch/mips/include/asm/edac.h b/arch/mips/include/asm/edac.h new file mode 100644 index 000000000000..4da0c1fe30d9 --- /dev/null +++ b/arch/mips/include/asm/edac.h @@ -0,0 +1,34 @@ +#ifndef ASM_EDAC_H +#define ASM_EDAC_H + +/* ECC atomic, DMA, SMP and interrupt safe scrub function */ + +static inline void atomic_scrub(void *va, u32 size) +{ + unsigned long *virt_addr = va; + unsigned long temp; + u32 i; + + for (i = 0; i < size / sizeof(unsigned long); i++) { + /* + * Very carefully read and write to memory atomically + * so we are interrupt, DMA and SMP safe. + * + * Intel: asm("lock; addl $0, %0"::"m"(*virt_addr)); + */ + + __asm__ __volatile__ ( + " .set mips2 \n" + "1: ll %0, %1 # atomic_scrub \n" + " addu %0, $0 \n" + " sc %0, %1 \n" + " beqz %0, 1b \n" + " .set mips0 \n" + : "=&r" (temp), "=m" (*virt_addr) + : "m" (*virt_addr)); + + virt_addr++; + } +} + +#endif diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h new file mode 100644 index 000000000000..f69f7acba637 --- /dev/null +++ b/arch/mips/include/asm/elf.h @@ -0,0 +1,371 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Much of this is taken from binutils and GNU libc ... + */ +#ifndef _ASM_ELF_H +#define _ASM_ELF_H + + +/* ELF header e_flags defines. */ +/* MIPS architecture level. */ +#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */ +#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */ +#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */ +#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */ +#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */ +#define EF_MIPS_ARCH_32 0x50000000 /* MIPS32 code. */ +#define EF_MIPS_ARCH_64 0x60000000 /* MIPS64 code. */ +#define EF_MIPS_ARCH_32R2 0x70000000 /* MIPS32 R2 code. */ +#define EF_MIPS_ARCH_64R2 0x80000000 /* MIPS64 R2 code. */ + +/* The ABI of a file. */ +#define EF_MIPS_ABI_O32 0x00001000 /* O32 ABI. */ +#define EF_MIPS_ABI_O64 0x00002000 /* O32 extended for 64 bit. */ + +#define PT_MIPS_REGINFO 0x70000000 +#define PT_MIPS_RTPROC 0x70000001 +#define PT_MIPS_OPTIONS 0x70000002 + +/* Flags in the e_flags field of the header */ +#define EF_MIPS_NOREORDER 0x00000001 +#define EF_MIPS_PIC 0x00000002 +#define EF_MIPS_CPIC 0x00000004 +#define EF_MIPS_ABI2 0x00000020 +#define EF_MIPS_OPTIONS_FIRST 0x00000080 +#define EF_MIPS_32BITMODE 0x00000100 +#define EF_MIPS_ABI 0x0000f000 +#define EF_MIPS_ARCH 0xf0000000 + +#define DT_MIPS_RLD_VERSION 0x70000001 +#define DT_MIPS_TIME_STAMP 0x70000002 +#define DT_MIPS_ICHECKSUM 0x70000003 +#define DT_MIPS_IVERSION 0x70000004 +#define DT_MIPS_FLAGS 0x70000005 + #define RHF_NONE 0x00000000 + #define RHF_HARDWAY 0x00000001 + #define RHF_NOTPOT 0x00000002 + #define RHF_SGI_ONLY 0x00000010 +#define DT_MIPS_BASE_ADDRESS 0x70000006 +#define DT_MIPS_CONFLICT 0x70000008 +#define DT_MIPS_LIBLIST 0x70000009 +#define DT_MIPS_LOCAL_GOTNO 0x7000000a +#define DT_MIPS_CONFLICTNO 0x7000000b +#define DT_MIPS_LIBLISTNO 0x70000010 +#define DT_MIPS_SYMTABNO 0x70000011 +#define DT_MIPS_UNREFEXTNO 0x70000012 +#define DT_MIPS_GOTSYM 0x70000013 +#define DT_MIPS_HIPAGENO 0x70000014 +#define DT_MIPS_RLD_MAP 0x70000016 + +#define R_MIPS_NONE 0 +#define R_MIPS_16 1 +#define R_MIPS_32 2 +#define R_MIPS_REL32 3 +#define R_MIPS_26 4 +#define R_MIPS_HI16 5 +#define R_MIPS_LO16 6 +#define R_MIPS_GPREL16 7 +#define R_MIPS_LITERAL 8 +#define R_MIPS_GOT16 9 +#define R_MIPS_PC16 10 +#define R_MIPS_CALL16 11 +#define R_MIPS_GPREL32 12 +/* The remaining relocs are defined on Irix, although they are not + in the MIPS ELF ABI. */ +#define R_MIPS_UNUSED1 13 +#define R_MIPS_UNUSED2 14 +#define R_MIPS_UNUSED3 15 +#define R_MIPS_SHIFT5 16 +#define R_MIPS_SHIFT6 17 +#define R_MIPS_64 18 +#define R_MIPS_GOT_DISP 19 +#define R_MIPS_GOT_PAGE 20 +#define R_MIPS_GOT_OFST 21 +/* + * The following two relocation types are specified in the MIPS ABI + * conformance guide version 1.2 but not yet in the psABI. + */ +#define R_MIPS_GOTHI16 22 +#define R_MIPS_GOTLO16 23 +#define R_MIPS_SUB 24 +#define R_MIPS_INSERT_A 25 +#define R_MIPS_INSERT_B 26 +#define R_MIPS_DELETE 27 +#define R_MIPS_HIGHER 28 +#define R_MIPS_HIGHEST 29 +/* + * The following two relocation types are specified in the MIPS ABI + * conformance guide version 1.2 but not yet in the psABI. + */ +#define R_MIPS_CALLHI16 30 +#define R_MIPS_CALLLO16 31 +/* + * This range is reserved for vendor specific relocations. + */ +#define R_MIPS_LOVENDOR 100 +#define R_MIPS_HIVENDOR 127 + +#define SHN_MIPS_ACCOMON 0xff00 /* Allocated common symbols */ +#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */ +#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */ +#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */ +#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */ + +#define SHT_MIPS_LIST 0x70000000 +#define SHT_MIPS_CONFLICT 0x70000002 +#define SHT_MIPS_GPTAB 0x70000003 +#define SHT_MIPS_UCODE 0x70000004 +#define SHT_MIPS_DEBUG 0x70000005 +#define SHT_MIPS_REGINFO 0x70000006 +#define SHT_MIPS_PACKAGE 0x70000007 +#define SHT_MIPS_PACKSYM 0x70000008 +#define SHT_MIPS_RELD 0x70000009 +#define SHT_MIPS_IFACE 0x7000000b +#define SHT_MIPS_CONTENT 0x7000000c +#define SHT_MIPS_OPTIONS 0x7000000d +#define SHT_MIPS_SHDR 0x70000010 +#define SHT_MIPS_FDESC 0x70000011 +#define SHT_MIPS_EXTSYM 0x70000012 +#define SHT_MIPS_DENSE 0x70000013 +#define SHT_MIPS_PDESC 0x70000014 +#define SHT_MIPS_LOCSYM 0x70000015 +#define SHT_MIPS_AUXSYM 0x70000016 +#define SHT_MIPS_OPTSYM 0x70000017 +#define SHT_MIPS_LOCSTR 0x70000018 +#define SHT_MIPS_LINE 0x70000019 +#define SHT_MIPS_RFDESC 0x7000001a +#define SHT_MIPS_DELTASYM 0x7000001b +#define SHT_MIPS_DELTAINST 0x7000001c +#define SHT_MIPS_DELTACLASS 0x7000001d +#define SHT_MIPS_DWARF 0x7000001e +#define SHT_MIPS_DELTADECL 0x7000001f +#define SHT_MIPS_SYMBOL_LIB 0x70000020 +#define SHT_MIPS_EVENTS 0x70000021 +#define SHT_MIPS_TRANSLATE 0x70000022 +#define SHT_MIPS_PIXIE 0x70000023 +#define SHT_MIPS_XLATE 0x70000024 +#define SHT_MIPS_XLATE_DEBUG 0x70000025 +#define SHT_MIPS_WHIRL 0x70000026 +#define SHT_MIPS_EH_REGION 0x70000027 +#define SHT_MIPS_XLATE_OLD 0x70000028 +#define SHT_MIPS_PDR_EXCEPTION 0x70000029 + +#define SHF_MIPS_GPREL 0x10000000 +#define SHF_MIPS_MERGE 0x20000000 +#define SHF_MIPS_ADDR 0x40000000 +#define SHF_MIPS_STRING 0x80000000 +#define SHF_MIPS_NOSTRIP 0x08000000 +#define SHF_MIPS_LOCAL 0x04000000 +#define SHF_MIPS_NAMES 0x02000000 +#define SHF_MIPS_NODUPES 0x01000000 + +#ifndef ELF_ARCH +/* ELF register definitions */ +#define ELF_NGREG 45 +#define ELF_NFPREG 33 + +typedef unsigned long elf_greg_t; +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef double elf_fpreg_t; +typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; + +#ifdef CONFIG_32BIT + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(hdr) \ +({ \ + int __res = 1; \ + struct elfhdr *__h = (hdr); \ + \ + if (__h->e_machine != EM_MIPS) \ + __res = 0; \ + if (__h->e_ident[EI_CLASS] != ELFCLASS32) \ + __res = 0; \ + if ((__h->e_flags & EF_MIPS_ABI2) != 0) \ + __res = 0; \ + if (((__h->e_flags & EF_MIPS_ABI) != 0) && \ + ((__h->e_flags & EF_MIPS_ABI) != EF_MIPS_ABI_O32)) \ + __res = 0; \ + \ + __res; \ +}) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 + +#endif /* CONFIG_32BIT */ + +#ifdef CONFIG_64BIT +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(hdr) \ +({ \ + int __res = 1; \ + struct elfhdr *__h = (hdr); \ + \ + if (__h->e_machine != EM_MIPS) \ + __res = 0; \ + if (__h->e_ident[EI_CLASS] != ELFCLASS64) \ + __res = 0; \ + \ + __res; \ +}) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS64 + +#endif /* CONFIG_64BIT */ + +/* + * These are used to set parameters in the core dumps. + */ +#ifdef __MIPSEB__ +#define ELF_DATA ELFDATA2MSB +#elif __MIPSEL__ +#define ELF_DATA ELFDATA2LSB +#endif +#define ELF_ARCH EM_MIPS + +#endif /* !defined(ELF_ARCH) */ + +struct mips_abi; + +extern struct mips_abi mips_abi; +extern struct mips_abi mips_abi_32; +extern struct mips_abi mips_abi_n32; + +#ifdef CONFIG_32BIT + +#define SET_PERSONALITY(ex, ibcs2) \ +do { \ + if (ibcs2) \ + set_personality(PER_SVR4); \ + set_personality(PER_LINUX); \ + \ + current->thread.abi = &mips_abi; \ +} while (0) + +#endif /* CONFIG_32BIT */ + +#ifdef CONFIG_64BIT + +#ifdef CONFIG_MIPS32_N32 +#define __SET_PERSONALITY32_N32() \ + do { \ + set_thread_flag(TIF_32BIT_ADDR); \ + current->thread.abi = &mips_abi_n32; \ + } while (0) +#else +#define __SET_PERSONALITY32_N32() \ + do { } while (0) +#endif + +#ifdef CONFIG_MIPS32_O32 +#define __SET_PERSONALITY32_O32() \ + do { \ + set_thread_flag(TIF_32BIT_REGS); \ + set_thread_flag(TIF_32BIT_ADDR); \ + current->thread.abi = &mips_abi_32; \ + } while (0) +#else +#define __SET_PERSONALITY32_O32() \ + do { } while (0) +#endif + +#ifdef CONFIG_MIPS32_COMPAT +#define __SET_PERSONALITY32(ex) \ +do { \ + if ((((ex).e_flags & EF_MIPS_ABI2) != 0) && \ + ((ex).e_flags & EF_MIPS_ABI) == 0) \ + __SET_PERSONALITY32_N32(); \ + else \ + __SET_PERSONALITY32_O32(); \ +} while (0) +#else +#define __SET_PERSONALITY32(ex) do { } while (0) +#endif + +#define SET_PERSONALITY(ex, ibcs2) \ +do { \ + clear_thread_flag(TIF_32BIT_REGS); \ + clear_thread_flag(TIF_32BIT_ADDR); \ + \ + if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ + __SET_PERSONALITY32(ex); \ + else \ + current->thread.abi = &mips_abi; \ + \ + if (ibcs2) \ + set_personality(PER_SVR4); \ + else if (current->personality != PER_LINUX32) \ + set_personality(PER_LINUX); \ +} while (0) + +#endif /* CONFIG_64BIT */ + +struct task_struct; + +extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs); +extern int dump_task_regs(struct task_struct *, elf_gregset_t *); +extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); + +#define ELF_CORE_COPY_REGS(elf_regs, regs) \ + elf_dump_regs((elf_greg_t *)&(elf_regs), regs); +#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) +#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \ + dump_task_fpu(tsk, elf_fpregs) + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. This could be done in userspace, + but it's not easy, and we've already done it here. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. + + For the moment, we have only optimizations for the Intel generations, + but that could change... */ + +#define ELF_PLATFORM (NULL) + +/* + * See comments in asm-alpha/elf.h, this is the same thing + * on the MIPS. + */ +#define ELF_PLAT_INIT(_r, load_addr) do { \ + _r->regs[1] = _r->regs[2] = _r->regs[3] = _r->regs[4] = 0; \ + _r->regs[5] = _r->regs[6] = _r->regs[7] = _r->regs[8] = 0; \ + _r->regs[9] = _r->regs[10] = _r->regs[11] = _r->regs[12] = 0; \ + _r->regs[13] = _r->regs[14] = _r->regs[15] = _r->regs[16] = 0; \ + _r->regs[17] = _r->regs[18] = _r->regs[19] = _r->regs[20] = 0; \ + _r->regs[21] = _r->regs[22] = _r->regs[23] = _r->regs[24] = 0; \ + _r->regs[25] = _r->regs[26] = _r->regs[27] = _r->regs[28] = 0; \ + _r->regs[30] = _r->regs[31] = 0; \ +} while (0) + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#ifndef ELF_ET_DYN_BASE +#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) +#endif + +#endif /* _ASM_ELF_H */ diff --git a/arch/mips/include/asm/emergency-restart.h b/arch/mips/include/asm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/arch/mips/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/mips/include/asm/emma2rh/emma2rh.h b/arch/mips/include/asm/emma2rh/emma2rh.h new file mode 100644 index 000000000000..6a1af0af51e3 --- /dev/null +++ b/arch/mips/include/asm/emma2rh/emma2rh.h @@ -0,0 +1,333 @@ +/* + * include/asm-mips/emma2rh/emma2rh.h + * This file is EMMA2RH common header. + * + * Copyright (C) NEC Electronics Corporation 2005-2006 + * + * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_EMMA2RH_EMMA2RH_H +#define __ASM_EMMA2RH_EMMA2RH_H + +#include + +/* + * EMMA2RH registers + */ +#define REGBASE 0x10000000 + +#define EMMA2RH_BHIF_STRAP_0 (0x000010+REGBASE) +#define EMMA2RH_BHIF_INT_ST_0 (0x000030+REGBASE) +#define EMMA2RH_BHIF_INT_ST_1 (0x000034+REGBASE) +#define EMMA2RH_BHIF_INT_ST_2 (0x000038+REGBASE) +#define EMMA2RH_BHIF_INT_EN_0 (0x000040+REGBASE) +#define EMMA2RH_BHIF_INT_EN_1 (0x000044+REGBASE) +#define EMMA2RH_BHIF_INT_EN_2 (0x000048+REGBASE) +#define EMMA2RH_BHIF_INT1_EN_0 (0x000050+REGBASE) +#define EMMA2RH_BHIF_INT1_EN_1 (0x000054+REGBASE) +#define EMMA2RH_BHIF_INT1_EN_2 (0x000058+REGBASE) +#define EMMA2RH_BHIF_SW_INT (0x000070+REGBASE) +#define EMMA2RH_BHIF_SW_INT_EN (0x000080+REGBASE) +#define EMMA2RH_BHIF_SW_INT_CLR (0x000090+REGBASE) +#define EMMA2RH_BHIF_MAIN_CTRL (0x0000b4+REGBASE) +#define EMMA2RH_BHIF_EXCEPT_VECT_BASE_ADDRESS (0x0000c0+REGBASE) +#define EMMA2RH_GPIO_DIR (0x110d20+REGBASE) +#define EMMA2RH_GPIO_INT_ST (0x110d30+REGBASE) +#define EMMA2RH_GPIO_INT_MASK (0x110d3c+REGBASE) +#define EMMA2RH_GPIO_INT_MODE (0x110d48+REGBASE) +#define EMMA2RH_GPIO_INT_CND_A (0x110d54+REGBASE) +#define EMMA2RH_GPIO_INT_CND_B (0x110d60+REGBASE) +#define EMMA2RH_PBRD_INT_EN (0x100010+REGBASE) +#define EMMA2RH_PBRD_CLKSEL (0x100028+REGBASE) +#define EMMA2RH_PFUR0_BASE (0x101000+REGBASE) +#define EMMA2RH_PFUR1_BASE (0x102000+REGBASE) +#define EMMA2RH_PFUR2_BASE (0x103000+REGBASE) +#define EMMA2RH_PIIC0_BASE (0x107000+REGBASE) +#define EMMA2RH_PIIC1_BASE (0x108000+REGBASE) +#define EMMA2RH_PIIC2_BASE (0x109000+REGBASE) +#define EMMA2RH_PCI_CONTROL (0x200000+REGBASE) +#define EMMA2RH_PCI_ARBIT_CTR (0x200004+REGBASE) +#define EMMA2RH_PCI_IWIN0_CTR (0x200010+REGBASE) +#define EMMA2RH_PCI_IWIN1_CTR (0x200014+REGBASE) +#define EMMA2RH_PCI_INIT_ESWP (0x200018+REGBASE) +#define EMMA2RH_PCI_INT (0x200020+REGBASE) +#define EMMA2RH_PCI_INT_EN (0x200024+REGBASE) +#define EMMA2RH_PCI_TWIN_CTR (0x200030+REGBASE) +#define EMMA2RH_PCI_TWIN_BADR (0x200034+REGBASE) +#define EMMA2RH_PCI_TWIN0_DADR (0x200038+REGBASE) +#define EMMA2RH_PCI_TWIN1_DADR (0x20003c+REGBASE) + +/* + * Memory map (physical address) + * + * Note most of the following address must be properly aligned by the + * corresponding size. For example, if PCI_IO_SIZE is 16MB, then + * PCI_IO_BASE must be aligned along 16MB boundary. + */ + +/* the actual ram size is detected at run-time */ +#define EMMA2RH_RAM_BASE 0x00000000 +#define EMMA2RH_RAM_SIZE 0x10000000 /* less than 256MB */ + +#define EMMA2RH_IO_BASE 0x10000000 +#define EMMA2RH_IO_SIZE 0x01000000 /* 16 MB */ + +#define EMMA2RH_GENERALIO_BASE 0x11000000 +#define EMMA2RH_GENERALIO_SIZE 0x01000000 /* 16 MB */ + +#define EMMA2RH_PCI_IO_BASE 0x12000000 +#define EMMA2RH_PCI_IO_SIZE 0x02000000 /* 32 MB */ + +#define EMMA2RH_PCI_MEM_BASE 0x14000000 +#define EMMA2RH_PCI_MEM_SIZE 0x08000000 /* 128 MB */ + +#define EMMA2RH_ROM_BASE 0x1c000000 +#define EMMA2RH_ROM_SIZE 0x04000000 /* 64 MB */ + +#define EMMA2RH_PCI_CONFIG_BASE EMMA2RH_PCI_IO_BASE +#define EMMA2RH_PCI_CONFIG_SIZE EMMA2RH_PCI_IO_SIZE + +#define NUM_CPU_IRQ 8 +#define NUM_EMMA2RH_IRQ 96 + +#define CPU_EMMA2RH_CASCADE 2 +#define CPU_IRQ_BASE MIPS_CPU_IRQ_BASE +#define EMMA2RH_IRQ_BASE (CPU_IRQ_BASE + NUM_CPU_IRQ) + +/* + * emma2rh irq defs + */ + +#define EMMA2RH_IRQ_INT0 (0 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT1 (1 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT2 (2 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT3 (3 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT4 (4 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT5 (5 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT6 (6 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT7 (7 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT8 (8 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT9 (9 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT10 (10 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT11 (11 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT12 (12 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT13 (13 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT14 (14 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT15 (15 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT16 (16 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT17 (17 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT18 (18 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT19 (19 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT20 (20 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT21 (21 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT22 (22 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT23 (23 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT24 (24 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT25 (25 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT26 (26 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT27 (27 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT28 (28 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT29 (29 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT30 (30 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT31 (31 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT32 (32 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT33 (33 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT34 (34 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT35 (35 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT36 (36 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT37 (37 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT38 (38 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT39 (39 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT40 (40 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT41 (41 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT42 (42 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT43 (43 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT44 (44 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT45 (45 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT46 (46 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT47 (47 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT48 (48 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT49 (49 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT50 (50 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT51 (51 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT52 (52 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT53 (53 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT54 (54 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT55 (55 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT56 (56 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT57 (57 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT58 (58 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT59 (59 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT60 (60 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT61 (61 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT62 (62 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT63 (63 + EMMA2RH_IRQ_BASE) + +#define EMMA2RH_IRQ_PFUR0 EMMA2RH_IRQ_INT49 +#define EMMA2RH_IRQ_PFUR1 EMMA2RH_IRQ_INT50 +#define EMMA2RH_IRQ_PFUR2 EMMA2RH_IRQ_INT51 +#define EMMA2RH_IRQ_PIIC0 EMMA2RH_IRQ_INT56 +#define EMMA2RH_IRQ_PIIC1 EMMA2RH_IRQ_INT57 +#define EMMA2RH_IRQ_PIIC2 EMMA2RH_IRQ_INT58 + +/* + * EMMA2RH Register Access + */ + +#define EMMA2RH_BASE (0xa0000000) + +static inline void emma2rh_sync(void) +{ + volatile u32 *p = (volatile u32 *)0xbfc00000; + (void)(*p); +} + +static inline void emma2rh_out32(u32 offset, u32 val) +{ + *(volatile u32 *)(EMMA2RH_BASE | offset) = val; + emma2rh_sync(); +} + +static inline u32 emma2rh_in32(u32 offset) +{ + u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset); + emma2rh_sync(); + return val; +} + +static inline void emma2rh_out16(u32 offset, u16 val) +{ + *(volatile u16 *)(EMMA2RH_BASE | offset) = val; + emma2rh_sync(); +} + +static inline u16 emma2rh_in16(u32 offset) +{ + u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset); + emma2rh_sync(); + return val; +} + +static inline void emma2rh_out8(u32 offset, u8 val) +{ + *(volatile u8 *)(EMMA2RH_BASE | offset) = val; + emma2rh_sync(); +} + +static inline u8 emma2rh_in8(u32 offset) +{ + u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset); + emma2rh_sync(); + return val; +} + +/** + * IIC registers map + **/ + +/*---------------------------------------------------------------------------*/ +/* CNT - Control register (00H R/W) */ +/*---------------------------------------------------------------------------*/ +#define SPT 0x00000001 +#define STT 0x00000002 +#define ACKE 0x00000004 +#define WTIM 0x00000008 +#define SPIE 0x00000010 +#define WREL 0x00000020 +#define LREL 0x00000040 +#define IICE 0x00000080 +#define CNT_RESERVED 0x000000ff /* reserved bit 0 */ + +#define I2C_EMMA_START (IICE | STT) +#define I2C_EMMA_STOP (IICE | SPT) +#define I2C_EMMA_REPSTART I2C_EMMA_START + +/*---------------------------------------------------------------------------*/ +/* STA - Status register (10H Read) */ +/*---------------------------------------------------------------------------*/ +#define MSTS 0x00000080 +#define ALD 0x00000040 +#define EXC 0x00000020 +#define COI 0x00000010 +#define TRC 0x00000008 +#define ACKD 0x00000004 +#define STD 0x00000002 +#define SPD 0x00000001 + +/*---------------------------------------------------------------------------*/ +/* CSEL - Clock select register (20H R/W) */ +/*---------------------------------------------------------------------------*/ +#define FCL 0x00000080 +#define ND50 0x00000040 +#define CLD 0x00000020 +#define DAD 0x00000010 +#define SMC 0x00000008 +#define DFC 0x00000004 +#define CL 0x00000003 +#define CSEL_RESERVED 0x000000ff /* reserved bit 0 */ + +#define FAST397 0x0000008b +#define FAST297 0x0000008a +#define FAST347 0x0000000b +#define FAST260 0x0000000a +#define FAST130 0x00000008 +#define STANDARD108 0x00000083 +#define STANDARD83 0x00000082 +#define STANDARD95 0x00000003 +#define STANDARD73 0x00000002 +#define STANDARD36 0x00000001 +#define STANDARD71 0x00000000 + +/*---------------------------------------------------------------------------*/ +/* SVA - Slave address register (30H R/W) */ +/*---------------------------------------------------------------------------*/ +#define SVA 0x000000fe + +/*---------------------------------------------------------------------------*/ +/* SHR - Shift register (40H R/W) */ +/*---------------------------------------------------------------------------*/ +#define SR 0x000000ff + +/*---------------------------------------------------------------------------*/ +/* INT - Interrupt register (50H R/W) */ +/* INTM - Interrupt mask register (60H R/W) */ +/*---------------------------------------------------------------------------*/ +#define INTE0 0x00000001 + +/*********************************************************************** + * I2C registers + *********************************************************************** + */ +#define I2C_EMMA_CNT 0x00 +#define I2C_EMMA_STA 0x10 +#define I2C_EMMA_CSEL 0x20 +#define I2C_EMMA_SVA 0x30 +#define I2C_EMMA_SHR 0x40 +#define I2C_EMMA_INT 0x50 +#define I2C_EMMA_INTM 0x60 + +/* + * include the board dependent part + */ +#if defined(CONFIG_MARKEINS) +#include +#else +#error "Unknown EMMA2RH board!" +#endif + +#endif /* __ASM_EMMA2RH_EMMA2RH_H */ diff --git a/arch/mips/include/asm/emma2rh/markeins.h b/arch/mips/include/asm/emma2rh/markeins.h new file mode 100644 index 000000000000..973b0628490d --- /dev/null +++ b/arch/mips/include/asm/emma2rh/markeins.h @@ -0,0 +1,75 @@ +/* + * include/asm-mips/emma2rh/markeins.h + * This file is EMMA2RH board depended header. + * + * Copyright (C) NEC Electronics Corporation 2005-2006 + * + * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef MARKEINS_H +#define MARKEINS_H + +#define NUM_EMMA2RH_IRQ_SW 32 +#define NUM_EMMA2RH_IRQ_GPIO 32 + +#define EMMA2RH_SW_CASCADE (EMMA2RH_IRQ_INT7 - EMMA2RH_IRQ_INT0) +#define EMMA2RH_GPIO_CASCADE (EMMA2RH_IRQ_INT46 - EMMA2RH_IRQ_INT0) + +#define EMMA2RH_SW_IRQ_BASE (EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ) +#define EMMA2RH_GPIO_IRQ_BASE (EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW) + +#define EMMA2RH_SW_IRQ_INT0 (0+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT1 (1+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT2 (2+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT3 (3+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT4 (4+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT5 (5+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT6 (6+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT7 (7+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT8 (8+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT9 (9+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT10 (10+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT11 (11+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT12 (12+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT13 (13+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT14 (14+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT15 (15+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT16 (16+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT17 (17+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT18 (18+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT19 (19+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT20 (20+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT21 (21+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT22 (22+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT23 (23+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT24 (24+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT25 (25+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT26 (26+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT27 (27+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT28 (28+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT29 (29+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT30 (30+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT31 (31+EMMA2RH_SW_IRQ_BASE) + +#define MARKEINS_PCI_IRQ_INTA EMMA2RH_GPIO_IRQ_BASE+15 +#define MARKEINS_PCI_IRQ_INTB EMMA2RH_GPIO_IRQ_BASE+16 +#define MARKEINS_PCI_IRQ_INTC EMMA2RH_GPIO_IRQ_BASE+17 +#define MARKEINS_PCI_IRQ_INTD EMMA2RH_GPIO_IRQ_BASE+18 + +#endif /* CONFIG_MARKEINS */ diff --git a/arch/mips/include/asm/errno.h b/arch/mips/include/asm/errno.h new file mode 100644 index 000000000000..3c0d840e4577 --- /dev/null +++ b/arch/mips/include/asm/errno.h @@ -0,0 +1,131 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle + */ +#ifndef _ASM_ERRNO_H +#define _ASM_ERRNO_H + +/* + * These error numbers are intended to be MIPS ABI compatible + */ + +#include + +#define ENOMSG 35 /* No message of desired type */ +#define EIDRM 36 /* Identifier removed */ +#define ECHRNG 37 /* Channel number out of range */ +#define EL2NSYNC 38 /* Level 2 not synchronized */ +#define EL3HLT 39 /* Level 3 halted */ +#define EL3RST 40 /* Level 3 reset */ +#define ELNRNG 41 /* Link number out of range */ +#define EUNATCH 42 /* Protocol driver not attached */ +#define ENOCSI 43 /* No CSI structure available */ +#define EL2HLT 44 /* Level 2 halted */ +#define EDEADLK 45 /* Resource deadlock would occur */ +#define ENOLCK 46 /* No record locks available */ +#define EBADE 50 /* Invalid exchange */ +#define EBADR 51 /* Invalid request descriptor */ +#define EXFULL 52 /* Exchange full */ +#define ENOANO 53 /* No anode */ +#define EBADRQC 54 /* Invalid request code */ +#define EBADSLT 55 /* Invalid slot */ +#define EDEADLOCK 56 /* File locking deadlock error */ +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EDOTDOT 73 /* RFS specific error */ +#define EMULTIHOP 74 /* Multihop attempted */ +#define EBADMSG 77 /* Not a data message */ +#define ENAMETOOLONG 78 /* File name too long */ +#define EOVERFLOW 79 /* Value too large for defined data type */ +#define ENOTUNIQ 80 /* Name not unique on network */ +#define EBADFD 81 /* File descriptor in bad state */ +#define EREMCHG 82 /* Remote address changed */ +#define ELIBACC 83 /* Can not access a needed shared library */ +#define ELIBBAD 84 /* Accessing a corrupted shared library */ +#define ELIBSCN 85 /* .lib section in a.out corrupted */ +#define ELIBMAX 86 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 87 /* Cannot exec a shared library directly */ +#define EILSEQ 88 /* Illegal byte sequence */ +#define ENOSYS 89 /* Function not implemented */ +#define ELOOP 90 /* Too many symbolic links encountered */ +#define ERESTART 91 /* Interrupted system call should be restarted */ +#define ESTRPIPE 92 /* Streams pipe error */ +#define ENOTEMPTY 93 /* Directory not empty */ +#define EUSERS 94 /* Too many users */ +#define ENOTSOCK 95 /* Socket operation on non-socket */ +#define EDESTADDRREQ 96 /* Destination address required */ +#define EMSGSIZE 97 /* Message too long */ +#define EPROTOTYPE 98 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 99 /* Protocol not available */ +#define EPROTONOSUPPORT 120 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 121 /* Socket type not supported */ +#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 123 /* Protocol family not supported */ +#define EAFNOSUPPORT 124 /* Address family not supported by protocol */ +#define EADDRINUSE 125 /* Address already in use */ +#define EADDRNOTAVAIL 126 /* Cannot assign requested address */ +#define ENETDOWN 127 /* Network is down */ +#define ENETUNREACH 128 /* Network is unreachable */ +#define ENETRESET 129 /* Network dropped connection because of reset */ +#define ECONNABORTED 130 /* Software caused connection abort */ +#define ECONNRESET 131 /* Connection reset by peer */ +#define ENOBUFS 132 /* No buffer space available */ +#define EISCONN 133 /* Transport endpoint is already connected */ +#define ENOTCONN 134 /* Transport endpoint is not connected */ +#define EUCLEAN 135 /* Structure needs cleaning */ +#define ENOTNAM 137 /* Not a XENIX named type file */ +#define ENAVAIL 138 /* No XENIX semaphores available */ +#define EISNAM 139 /* Is a named type file */ +#define EREMOTEIO 140 /* Remote I/O error */ +#define EINIT 141 /* Reserved */ +#define EREMDEV 142 /* Error 142 */ +#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 144 /* Too many references: cannot splice */ +#define ETIMEDOUT 145 /* Connection timed out */ +#define ECONNREFUSED 146 /* Connection refused */ +#define EHOSTDOWN 147 /* Host is down */ +#define EHOSTUNREACH 148 /* No route to host */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define EALREADY 149 /* Operation already in progress */ +#define EINPROGRESS 150 /* Operation now in progress */ +#define ESTALE 151 /* Stale NFS file handle */ +#define ECANCELED 158 /* AIO operation canceled */ + +/* + * These error are Linux extensions. + */ +#define ENOMEDIUM 159 /* No medium found */ +#define EMEDIUMTYPE 160 /* Wrong medium type */ +#define ENOKEY 161 /* Required key not available */ +#define EKEYEXPIRED 162 /* Key has expired */ +#define EKEYREVOKED 163 /* Key has been revoked */ +#define EKEYREJECTED 164 /* Key was rejected by service */ + +/* for robust mutexes */ +#define EOWNERDEAD 165 /* Owner died */ +#define ENOTRECOVERABLE 166 /* State not recoverable */ + +#define EDQUOT 1133 /* Quota exceeded */ + +#ifdef __KERNEL__ + +/* The biggest error number defined here or in . */ +#define EMAXERRNO 1133 + +#endif /* __KERNEL__ */ + +#endif /* _ASM_ERRNO_H */ diff --git a/arch/mips/include/asm/fb.h b/arch/mips/include/asm/fb.h new file mode 100644 index 000000000000..bd3f68c9ddfc --- /dev/null +++ b/arch/mips/include/asm/fb.h @@ -0,0 +1,19 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include +#include +#include + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/mips/include/asm/fcntl.h b/arch/mips/include/asm/fcntl.h new file mode 100644 index 000000000000..2a52333a062d --- /dev/null +++ b/arch/mips/include/asm/fcntl.h @@ -0,0 +1,61 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 97, 98, 99, 2003, 05 Ralf Baechle + */ +#ifndef _ASM_FCNTL_H +#define _ASM_FCNTL_H + + +#define O_APPEND 0x0008 +#define O_SYNC 0x0010 +#define O_NONBLOCK 0x0080 +#define O_CREAT 0x0100 /* not fcntl */ +#define O_TRUNC 0x0200 /* not fcntl */ +#define O_EXCL 0x0400 /* not fcntl */ +#define O_NOCTTY 0x0800 /* not fcntl */ +#define FASYNC 0x1000 /* fcntl, for BSD compatibility */ +#define O_LARGEFILE 0x2000 /* allow large file opens */ +#define O_DIRECT 0x8000 /* direct disk access hint */ + +#define F_GETLK 14 +#define F_SETLK 6 +#define F_SETLKW 7 + +#define F_SETOWN 24 /* for sockets. */ +#define F_GETOWN 23 /* for sockets. */ + +#ifndef __mips64 +#define F_GETLK64 33 /* using 'struct flock64' */ +#define F_SETLK64 34 +#define F_SETLKW64 35 +#endif + +/* + * The flavours of struct flock. "struct flock" is the ABI compliant + * variant. Finally struct flock64 is the LFS variant of struct flock. As + * a historic accident and inconsistence with the ABI definition it doesn't + * contain all the same fields as struct flock. + */ + +#ifdef CONFIG_32BIT + +struct flock { + short l_type; + short l_whence; + off_t l_start; + off_t l_len; + long l_sysid; + __kernel_pid_t l_pid; + long pad[4]; +}; + +#define HAVE_ARCH_STRUCT_FLOCK + +#endif /* CONFIG_32BIT */ + +#include + +#endif /* _ASM_FCNTL_H */ diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h new file mode 100644 index 000000000000..9cc8522a394f --- /dev/null +++ b/arch/mips/include/asm/fixmap.h @@ -0,0 +1,118 @@ +/* + * fixmap.h: compile-time virtual memory allocation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Ingo Molnar + * + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 + */ + +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +#include +#ifdef CONFIG_HIGHMEM +#include +#include +#endif + +/* + * Here we define all the compile-time 'special' virtual + * addresses. The point is to have a constant address at + * compile time, but to set the physical address only + * in the boot process. We allocate these special addresses + * from the end of virtual memory (0xfffff000) backwards. + * Also this lets us do fail-safe vmalloc(), we + * can guarantee that these special addresses and + * vmalloc()-ed addresses never overlap. + * + * these 'compile-time allocated' memory buffers are + * fixed-size 4k pages. (or larger if used with an increment + * highger than 1) use fixmap_set(idx,phys) to associate + * physical memory with fixmap indices. + * + * TLB entries of such buffers will not be flushed across + * task switches. + */ + +/* + * on UP currently we will have no trace of the fixmap mechanizm, + * no page table allocations, etc. This might change in the + * future, say framebuffers for the console driver(s) could be + * fix-mapped? + */ +enum fixed_addresses { +#define FIX_N_COLOURS 8 + FIX_CMAP_BEGIN, +#ifdef CONFIG_MIPS_MT_SMTC + FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS), +#else + FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS, +#endif +#ifdef CONFIG_HIGHMEM + /* reserved pte's for temporary kernel mappings */ + FIX_KMAP_BEGIN = FIX_CMAP_END + 1, + FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, +#endif + __end_of_fixed_addresses +}; + +/* + * used by vmalloc.c. + * + * Leave one empty page between vmalloc'ed areas and + * the start of the fixmap, and leave one page empty + * at the top of mem.. + */ +#if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX) +#define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000)) +#else +#define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000) +#endif +#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) + +#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) + +extern void __this_fixmap_does_not_exist(void); + +/* + * 'index to address' translation. If anyone tries to use the idx + * directly without tranlation, we catch the bug with a NULL-deference + * kernel oops. Illegal ranges of incoming indices are caught too. + */ +static inline unsigned long fix_to_virt(const unsigned int idx) +{ + /* + * this branch gets completely eliminated after inlining, + * except when someone tries to use fixaddr indices in an + * illegal way. (such as mixing up address types or using + * out-of-range indices). + * + * If it doesn't get removed, the linker will complain + * loudly with a reasonably clear error message.. + */ + if (idx >= __end_of_fixed_addresses) + __this_fixmap_does_not_exist(); + + return __fix_to_virt(idx); +} + +static inline unsigned long virt_to_fix(const unsigned long vaddr) +{ + BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); + return __virt_to_fix(vaddr); +} + +/* + * Called from pgtable_init() + */ +extern void fixrange_init(unsigned long start, unsigned long end, + pgd_t *pgd_base); + + +#endif diff --git a/arch/mips/include/asm/floppy.h b/arch/mips/include/asm/floppy.h new file mode 100644 index 000000000000..992d232adc83 --- /dev/null +++ b/arch/mips/include/asm/floppy.h @@ -0,0 +1,56 @@ +/* + * Architecture specific parts of the Floppy driver + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 - 2000 Ralf Baechle + */ +#ifndef _ASM_FLOPPY_H +#define _ASM_FLOPPY_H + +#include + +static inline void fd_cacheflush(char * addr, long size) +{ + dma_cache_sync(NULL, addr, size, DMA_BIDIRECTIONAL); +} + +#define MAX_BUFFER_SECTORS 24 + + +/* + * And on Mips's the CMOS info fails also ... + * + * FIXME: This information should come from the ARC configuration tree + * or whereever a particular machine has stored this ... + */ +#define FLOPPY0_TYPE fd_drive_type(0) +#define FLOPPY1_TYPE fd_drive_type(1) + +#define FDC1 fd_getfdaddr1(); + +#define N_FDC 1 /* do you *really* want a second controller? */ +#define N_DRIVE 8 + +/* + * The DMA channel used by the floppy controller cannot access data at + * addresses >= 16MB + * + * Went back to the 1MB limit, as some people had problems with the floppy + * driver otherwise. It doesn't matter much for performance anyway, as most + * floppy accesses go through the track buffer. + * + * On MIPSes using vdma, this actually means that *all* transfers go thru + * the * track buffer since 0x1000000 is always smaller than KSEG0/1. + * Actually this needs to be a bit more complicated since the so much different + * hardware available with MIPS CPUs ... + */ +#define CROSS_64KB(a, s) ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64) + +#define EXTRA_FLOPPY_PARAMS + +#include + +#endif /* _ASM_FLOPPY_H */ diff --git a/arch/mips/include/asm/fpregdef.h b/arch/mips/include/asm/fpregdef.h new file mode 100644 index 000000000000..2b5fddc8f487 --- /dev/null +++ b/arch/mips/include/asm/fpregdef.h @@ -0,0 +1,99 @@ +/* + * Definitions for the FPU register names + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999 Ralf Baechle + * Copyright (C) 1985 MIPS Computer Systems, Inc. + * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_FPREGDEF_H +#define _ASM_FPREGDEF_H + +#include + +#if _MIPS_SIM == _MIPS_SIM_ABI32 + +/* + * These definitions only cover the R3000-ish 16/32 register model. + * But we're trying to be R3000 friendly anyway ... + */ +#define fv0 $f0 /* return value */ +#define fv0f $f1 +#define fv1 $f2 +#define fv1f $f3 +#define fa0 $f12 /* argument registers */ +#define fa0f $f13 +#define fa1 $f14 +#define fa1f $f15 +#define ft0 $f4 /* caller saved */ +#define ft0f $f5 +#define ft1 $f6 +#define ft1f $f7 +#define ft2 $f8 +#define ft2f $f9 +#define ft3 $f10 +#define ft3f $f11 +#define ft4 $f16 +#define ft4f $f17 +#define ft5 $f18 +#define ft5f $f19 +#define fs0 $f20 /* callee saved */ +#define fs0f $f21 +#define fs1 $f22 +#define fs1f $f23 +#define fs2 $f24 +#define fs2f $f25 +#define fs3 $f26 +#define fs3f $f27 +#define fs4 $f28 +#define fs4f $f29 +#define fs5 $f30 +#define fs5f $f31 + +#define fcr31 $31 /* FPU status register */ + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 + +#define fv0 $f0 /* return value */ +#define fv1 $f2 +#define fa0 $f12 /* argument registers */ +#define fa1 $f13 +#define fa2 $f14 +#define fa3 $f15 +#define fa4 $f16 +#define fa5 $f17 +#define fa6 $f18 +#define fa7 $f19 +#define ft0 $f4 /* caller saved */ +#define ft1 $f5 +#define ft2 $f6 +#define ft3 $f7 +#define ft4 $f8 +#define ft5 $f9 +#define ft6 $f10 +#define ft7 $f11 +#define ft8 $f20 +#define ft9 $f21 +#define ft10 $f22 +#define ft11 $f23 +#define ft12 $f1 +#define ft13 $f3 +#define fs0 $f24 /* callee saved */ +#define fs1 $f25 +#define fs2 $f26 +#define fs3 $f27 +#define fs4 $f28 +#define fs5 $f29 +#define fs6 $f30 +#define fs7 $f31 + +#define fcr31 $31 + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */ + +#endif /* _ASM_FPREGDEF_H */ diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h new file mode 100644 index 000000000000..8a3ef247659a --- /dev/null +++ b/arch/mips/include/asm/fpu.h @@ -0,0 +1,153 @@ +/* + * Copyright (C) 2002 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _ASM_FPU_H +#define _ASM_FPU_H + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MIPS_MT_FPAFF +#include +#endif + +struct sigcontext; +struct sigcontext32; + +extern asmlinkage int (*save_fp_context)(struct sigcontext __user *sc); +extern asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc); + +extern asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc); +extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc); + +extern void fpu_emulator_init_fpu(void); +extern int fpu_emulator_save_context(struct sigcontext __user *sc); +extern int fpu_emulator_restore_context(struct sigcontext __user *sc); +extern void _init_fpu(void); +extern void _save_fp(struct task_struct *); +extern void _restore_fp(struct task_struct *); + +#define __enable_fpu() \ +do { \ + set_c0_status(ST0_CU1); \ + enable_fpu_hazard(); \ +} while (0) + +#define __disable_fpu() \ +do { \ + clear_c0_status(ST0_CU1); \ + disable_fpu_hazard(); \ +} while (0) + +#define enable_fpu() \ +do { \ + if (cpu_has_fpu) \ + __enable_fpu(); \ +} while (0) + +#define disable_fpu() \ +do { \ + if (cpu_has_fpu) \ + __disable_fpu(); \ +} while (0) + + +#define clear_fpu_owner() clear_thread_flag(TIF_USEDFPU) + +static inline int __is_fpu_owner(void) +{ + return test_thread_flag(TIF_USEDFPU); +} + +static inline int is_fpu_owner(void) +{ + return cpu_has_fpu && __is_fpu_owner(); +} + +static inline void __own_fpu(void) +{ + __enable_fpu(); + KSTK_STATUS(current) |= ST0_CU1; + set_thread_flag(TIF_USEDFPU); +} + +static inline void own_fpu_inatomic(int restore) +{ + if (cpu_has_fpu && !__is_fpu_owner()) { + __own_fpu(); + if (restore) + _restore_fp(current); + } +} + +static inline void own_fpu(int restore) +{ + preempt_disable(); + own_fpu_inatomic(restore); + preempt_enable(); +} + +static inline void lose_fpu(int save) +{ + preempt_disable(); + if (is_fpu_owner()) { + if (save) + _save_fp(current); + KSTK_STATUS(current) &= ~ST0_CU1; + clear_thread_flag(TIF_USEDFPU); + __disable_fpu(); + } + preempt_enable(); +} + +static inline void init_fpu(void) +{ + preempt_disable(); + if (cpu_has_fpu) { + __own_fpu(); + _init_fpu(); + } else { + fpu_emulator_init_fpu(); + } + preempt_enable(); +} + +static inline void save_fp(struct task_struct *tsk) +{ + if (cpu_has_fpu) + _save_fp(tsk); +} + +static inline void restore_fp(struct task_struct *tsk) +{ + if (cpu_has_fpu) + _restore_fp(tsk); +} + +static inline fpureg_t *get_fpu_regs(struct task_struct *tsk) +{ + if (tsk == current) { + preempt_disable(); + if (is_fpu_owner()) + _save_fp(current); + preempt_enable(); + } + + return tsk->thread.fpu.fpr; +} + +#endif /* _ASM_FPU_H */ diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h new file mode 100644 index 000000000000..2731c38bd7ae --- /dev/null +++ b/arch/mips/include/asm/fpu_emulator.h @@ -0,0 +1,37 @@ +/* + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Further private data for which no space exists in mips_fpu_struct. + * This should be subsumed into the mips_fpu_struct structure as + * defined in processor.h as soon as the absurd wired absolute assembler + * offsets become dynamic at compile time. + * + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + */ +#ifndef _ASM_FPU_EMULATOR_H +#define _ASM_FPU_EMULATOR_H + +struct mips_fpu_emulator_stats { + unsigned int emulated; + unsigned int loads; + unsigned int stores; + unsigned int cp1ops; + unsigned int cp1xops; + unsigned int errors; +}; + +extern struct mips_fpu_emulator_stats fpuemustats; + +#endif /* _ASM_FPU_EMULATOR_H */ diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h new file mode 100644 index 000000000000..b9cce90346cf --- /dev/null +++ b/arch/mips/include/asm/futex.h @@ -0,0 +1,203 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2006 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +{ \ + if (cpu_has_llsc && R10000_LLSC_WAR) { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips3 \n" \ + "1: ll %1, %4 # __futex_atomic_op \n" \ + " .set mips0 \n" \ + " " insn " \n" \ + " .set mips3 \n" \ + "2: sc $1, %2 \n" \ + " beqzl $1, 1b \n" \ + __WEAK_LLSC_MB \ + "3: \n" \ + " .set pop \n" \ + " .set mips0 \n" \ + " .section .fixup,\"ax\" \n" \ + "4: li %0, %6 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " "__UA_ADDR "\t1b, 4b \n" \ + " "__UA_ADDR "\t2b, 4b \n" \ + " .previous \n" \ + : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) \ + : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) \ + : "memory"); \ + } else if (cpu_has_llsc) { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips3 \n" \ + "1: ll %1, %4 # __futex_atomic_op \n" \ + " .set mips0 \n" \ + " " insn " \n" \ + " .set mips3 \n" \ + "2: sc $1, %2 \n" \ + " beqz $1, 1b \n" \ + __WEAK_LLSC_MB \ + "3: \n" \ + " .set pop \n" \ + " .set mips0 \n" \ + " .section .fixup,\"ax\" \n" \ + "4: li %0, %6 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " "__UA_ADDR "\t1b, 4b \n" \ + " "__UA_ADDR "\t2b, 4b \n" \ + " .previous \n" \ + : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) \ + : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) \ + : "memory"); \ + } else \ + ret = -ENOSYS; \ +} + +static inline int +futex_atomic_op_inuser(int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("move $1, %z5", ret, oldval, uaddr, oparg); + break; + + case FUTEX_OP_ADD: + __futex_atomic_op("addu $1, %1, %z5", + ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or $1, %1, %z5", + ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("and $1, %1, %z5", + ret, oldval, uaddr, ~oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor $1, %1, %z5", + ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + int retval; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + __asm__ __volatile__( + "# futex_atomic_cmpxchg_inatomic \n" + " .set push \n" + " .set noat \n" + " .set mips3 \n" + "1: ll %0, %2 \n" + " bne %0, %z3, 3f \n" + " .set mips0 \n" + " move $1, %z4 \n" + " .set mips3 \n" + "2: sc $1, %1 \n" + " beqzl $1, 1b \n" + __WEAK_LLSC_MB + "3: \n" + " .set pop \n" + " .section .fixup,\"ax\" \n" + "4: li %0, %5 \n" + " j 3b \n" + " .previous \n" + " .section __ex_table,\"a\" \n" + " "__UA_ADDR "\t1b, 4b \n" + " "__UA_ADDR "\t2b, 4b \n" + " .previous \n" + : "=&r" (retval), "=R" (*uaddr) + : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT) + : "memory"); + } else if (cpu_has_llsc) { + __asm__ __volatile__( + "# futex_atomic_cmpxchg_inatomic \n" + " .set push \n" + " .set noat \n" + " .set mips3 \n" + "1: ll %0, %2 \n" + " bne %0, %z3, 3f \n" + " .set mips0 \n" + " move $1, %z4 \n" + " .set mips3 \n" + "2: sc $1, %1 \n" + " beqz $1, 1b \n" + __WEAK_LLSC_MB + "3: \n" + " .set pop \n" + " .section .fixup,\"ax\" \n" + "4: li %0, %5 \n" + " j 3b \n" + " .previous \n" + " .section __ex_table,\"a\" \n" + " "__UA_ADDR "\t1b, 4b \n" + " "__UA_ADDR "\t2b, 4b \n" + " .previous \n" + : "=&r" (retval), "=R" (*uaddr) + : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT) + : "memory"); + } else + return -ENOSYS; + + return retval; +} + +#endif +#endif /* _ASM_FUTEX_H */ diff --git a/arch/mips/include/asm/fw/arc/hinv.h b/arch/mips/include/asm/fw/arc/hinv.h new file mode 100644 index 000000000000..e6ff4add04e2 --- /dev/null +++ b/arch/mips/include/asm/fw/arc/hinv.h @@ -0,0 +1,175 @@ +/* + * ARCS hardware/memory inventory/configuration and system ID definitions. + */ +#ifndef _ASM_ARC_HINV_H +#define _ASM_ARC_HINV_H + +#include +#include + +/* configuration query defines */ +typedef enum configclass { + SystemClass, + ProcessorClass, + CacheClass, +#ifndef _NT_PROM + MemoryClass, + AdapterClass, + ControllerClass, + PeripheralClass +#else /* _NT_PROM */ + AdapterClass, + ControllerClass, + PeripheralClass, + MemoryClass +#endif /* _NT_PROM */ +} CONFIGCLASS; + +typedef enum configtype { + ARC, + CPU, + FPU, + PrimaryICache, + PrimaryDCache, + SecondaryICache, + SecondaryDCache, + SecondaryCache, +#ifndef _NT_PROM + Memory, +#endif + EISAAdapter, + TCAdapter, + SCSIAdapter, + DTIAdapter, + MultiFunctionAdapter, + DiskController, + TapeController, + CDROMController, + WORMController, + SerialController, + NetworkController, + DisplayController, + ParallelController, + PointerController, + KeyboardController, + AudioController, + OtherController, + DiskPeripheral, + FloppyDiskPeripheral, + TapePeripheral, + ModemPeripheral, + MonitorPeripheral, + PrinterPeripheral, + PointerPeripheral, + KeyboardPeripheral, + TerminalPeripheral, + LinePeripheral, + NetworkPeripheral, +#ifdef _NT_PROM + Memory, +#endif + OtherPeripheral, + + /* new stuff for IP30 */ + /* added without moving anything */ + /* except ANONYMOUS. */ + + XTalkAdapter, + PCIAdapter, + GIOAdapter, + TPUAdapter, + + Anonymous +} CONFIGTYPE; + +typedef enum { + Failed = 1, + ReadOnly = 2, + Removable = 4, + ConsoleIn = 8, + ConsoleOut = 16, + Input = 32, + Output = 64 +} IDENTIFIERFLAG; + +#ifndef NULL /* for GetChild(NULL); */ +#define NULL 0 +#endif + +union key_u { + struct { +#ifdef _MIPSEB + unsigned char c_bsize; /* block size in lines */ + unsigned char c_lsize; /* line size in bytes/tag */ + unsigned short c_size; /* cache size in 4K pages */ +#else /* _MIPSEL */ + unsigned short c_size; /* cache size in 4K pages */ + unsigned char c_lsize; /* line size in bytes/tag */ + unsigned char c_bsize; /* block size in lines */ +#endif /* _MIPSEL */ + } cache; + ULONG FullKey; +}; + +#if _MIPS_SIM == _MIPS_SIM_ABI64 +#define SGI_ARCS_VERS 64 /* sgi 64-bit version */ +#define SGI_ARCS_REV 0 /* rev .00 */ +#else +#define SGI_ARCS_VERS 1 /* first version */ +#define SGI_ARCS_REV 10 /* rev .10, 3/04/92 */ +#endif + +typedef struct component { + CONFIGCLASS Class; + CONFIGTYPE Type; + IDENTIFIERFLAG Flags; + USHORT Version; + USHORT Revision; + ULONG Key; + ULONG AffinityMask; + ULONG ConfigurationDataSize; + ULONG IdentifierLength; + char *Identifier; +} COMPONENT; + +/* internal structure that holds pathname parsing data */ +struct cfgdata { + char *name; /* full name */ + int minlen; /* minimum length to match */ + CONFIGTYPE type; /* type of token */ +}; + +/* System ID */ +typedef struct systemid { + CHAR VendorId[8]; + CHAR ProductId[8]; +} SYSTEMID; + +/* memory query functions */ +typedef enum memorytype { + ExceptionBlock, + SPBPage, /* ARCS == SystemParameterBlock */ +#ifndef _NT_PROM + FreeContiguous, + FreeMemory, + BadMemory, + LoadedProgram, + FirmwareTemporary, + FirmwarePermanent +#else /* _NT_PROM */ + FreeMemory, + BadMemory, + LoadedProgram, + FirmwareTemporary, + FirmwarePermanent, + FreeContiguous +#endif /* _NT_PROM */ +} MEMORYTYPE; + +typedef struct memorydescriptor { + MEMORYTYPE Type; + LONG BasePage; + LONG PageCount; +} MEMORYDESCRIPTOR; + +#endif /* _ASM_ARC_HINV_H */ diff --git a/arch/mips/include/asm/fw/arc/types.h b/arch/mips/include/asm/fw/arc/types.h new file mode 100644 index 000000000000..b9adcd6f0860 --- /dev/null +++ b/arch/mips/include/asm/fw/arc/types.h @@ -0,0 +1,86 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright 1999 Ralf Baechle (ralf@gnu.org) + * Copyright 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_ARC_TYPES_H +#define _ASM_ARC_TYPES_H + + +#ifdef CONFIG_ARC32 + +typedef char CHAR; +typedef short SHORT; +typedef long LARGE_INTEGER __attribute__ ((__mode__ (__DI__))); +typedef long LONG __attribute__ ((__mode__ (__SI__))); +typedef unsigned char UCHAR; +typedef unsigned short USHORT; +typedef unsigned long ULONG __attribute__ ((__mode__ (__SI__))); +typedef void VOID; + +/* The pointer types. Note that we're using a 64-bit compiler but all + pointer in the ARC structures are only 32-bit, so we need some disgusting + workarounds. Keep your vomit bag handy. */ +typedef LONG _PCHAR; +typedef LONG _PSHORT; +typedef LONG _PLARGE_INTEGER; +typedef LONG _PLONG; +typedef LONG _PUCHAR; +typedef LONG _PUSHORT; +typedef LONG _PULONG; +typedef LONG _PVOID; + +#endif /* CONFIG_ARC32 */ + +#ifdef CONFIG_ARC64 + +typedef char CHAR; +typedef short SHORT; +typedef long LARGE_INTEGER __attribute__ ((__mode__ (__DI__))); +typedef long LONG __attribute__ ((__mode__ (__DI__))); +typedef unsigned char UCHAR; +typedef unsigned short USHORT; +typedef unsigned long ULONG __attribute__ ((__mode__ (__DI__))); +typedef void VOID; + +/* The pointer types. We're 64-bit and the firmware is also 64-bit, so + live is sane ... */ +typedef CHAR *_PCHAR; +typedef SHORT *_PSHORT; +typedef LARGE_INTEGER *_PLARGE_INTEGER; +typedef LONG *_PLONG; +typedef UCHAR *_PUCHAR; +typedef USHORT *_PUSHORT; +typedef ULONG *_PULONG; +typedef VOID *_PVOID; + +#endif /* CONFIG_ARC64 */ + +typedef CHAR *PCHAR; +typedef SHORT *PSHORT; +typedef LARGE_INTEGER *PLARGE_INTEGER; +typedef LONG *PLONG; +typedef UCHAR *PUCHAR; +typedef USHORT *PUSHORT; +typedef ULONG *PULONG; +typedef VOID *PVOID; + +/* + * Return type of ArcGetDisplayStatus() + */ +typedef struct { + USHORT CursorXPosition; + USHORT CursorYPosition; + USHORT CursorMaxXPosition; + USHORT CursorMaxYPosition; + USHORT ForegroundColor; + USHORT BackgroundColor; + UCHAR HighIntensity; + UCHAR Underscored; + UCHAR ReverseVideo; +} DISPLAY_STATUS; + +#endif /* _ASM_ARC_TYPES_H */ diff --git a/arch/mips/include/asm/fw/cfe/cfe_api.h b/arch/mips/include/asm/fw/cfe/cfe_api.h new file mode 100644 index 000000000000..0995575db320 --- /dev/null +++ b/arch/mips/include/asm/fw/cfe/cfe_api.h @@ -0,0 +1,122 @@ +/* + * Copyright (C) 2000, 2001, 2002 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* + * Broadcom Common Firmware Environment (CFE) + * + * This file contains declarations for doing callbacks to + * cfe from an application. It should be the only header + * needed by the application to use this library + * + * Authors: Mitch Lichtenberg, Chris Demetriou + */ +#ifndef CFE_API_H +#define CFE_API_H + +#include +#include + +typedef long intptr_t; + + +/* + * Constants + */ + +/* Seal indicating CFE's presence, passed to user program. */ +#define CFE_EPTSEAL 0x43464531 + +#define CFE_MI_RESERVED 0 /* memory is reserved, do not use */ +#define CFE_MI_AVAILABLE 1 /* memory is available */ + +#define CFE_FLG_WARMSTART 0x00000001 +#define CFE_FLG_FULL_ARENA 0x00000001 +#define CFE_FLG_ENV_PERMANENT 0x00000001 + +#define CFE_CPU_CMD_START 1 +#define CFE_CPU_CMD_STOP 0 + +#define CFE_STDHANDLE_CONSOLE 0 + +#define CFE_DEV_NETWORK 1 +#define CFE_DEV_DISK 2 +#define CFE_DEV_FLASH 3 +#define CFE_DEV_SERIAL 4 +#define CFE_DEV_CPU 5 +#define CFE_DEV_NVRAM 6 +#define CFE_DEV_CLOCK 7 +#define CFE_DEV_OTHER 8 +#define CFE_DEV_MASK 0x0F + +#define CFE_CACHE_FLUSH_D 1 +#define CFE_CACHE_INVAL_I 2 +#define CFE_CACHE_INVAL_D 4 +#define CFE_CACHE_INVAL_L2 8 + +#define CFE_FWI_64BIT 0x00000001 +#define CFE_FWI_32BIT 0x00000002 +#define CFE_FWI_RELOC 0x00000004 +#define CFE_FWI_UNCACHED 0x00000008 +#define CFE_FWI_MULTICPU 0x00000010 +#define CFE_FWI_FUNCSIM 0x00000020 +#define CFE_FWI_RTLSIM 0x00000040 + +typedef struct { + int64_t fwi_version; /* major, minor, eco version */ + int64_t fwi_totalmem; /* total installed mem */ + int64_t fwi_flags; /* various flags */ + int64_t fwi_boardid; /* board ID */ + int64_t fwi_bootarea_va; /* VA of boot area */ + int64_t fwi_bootarea_pa; /* PA of boot area */ + int64_t fwi_bootarea_size; /* size of boot area */ +} cfe_fwinfo_t; + + +/* + * Defines and prototypes for functions which take no arguments. + */ +int64_t cfe_getticks(void); + +/* + * Defines and prototypes for the rest of the functions. + */ +int cfe_close(int handle); +int cfe_cpu_start(int cpu, void (*fn) (void), long sp, long gp, long a1); +int cfe_cpu_stop(int cpu); +int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen); +int cfe_enummem(int idx, int flags, uint64_t * start, uint64_t * length, + uint64_t * type); +int cfe_exit(int warm, int status); +int cfe_flushcache(int flg); +int cfe_getdevinfo(char *name); +int cfe_getenv(char *name, char *dest, int destlen); +int cfe_getfwinfo(cfe_fwinfo_t * info); +int cfe_getstdhandle(int flg); +int cfe_init(uint64_t handle, uint64_t ept); +int cfe_inpstat(int handle); +int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer, + int length, int *retlen, uint64_t offset); +int cfe_open(char *name); +int cfe_read(int handle, unsigned char *buffer, int length); +int cfe_readblk(int handle, int64_t offset, unsigned char *buffer, + int length); +int cfe_setenv(char *name, char *val); +int cfe_write(int handle, unsigned char *buffer, int length); +int cfe_writeblk(int handle, int64_t offset, unsigned char *buffer, + int length); + +#endif /* CFE_API_H */ diff --git a/arch/mips/include/asm/fw/cfe/cfe_error.h b/arch/mips/include/asm/fw/cfe/cfe_error.h new file mode 100644 index 000000000000..b80374636279 --- /dev/null +++ b/arch/mips/include/asm/fw/cfe/cfe_error.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2000, 2001, 2002 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * Broadcom Common Firmware Environment (CFE) + * + * CFE's global error code list is here. + * + * Author: Mitch Lichtenberg + */ + +#define CFE_OK 0 +#define CFE_ERR -1 /* generic error */ +#define CFE_ERR_INV_COMMAND -2 +#define CFE_ERR_EOF -3 +#define CFE_ERR_IOERR -4 +#define CFE_ERR_NOMEM -5 +#define CFE_ERR_DEVNOTFOUND -6 +#define CFE_ERR_DEVOPEN -7 +#define CFE_ERR_INV_PARAM -8 +#define CFE_ERR_ENVNOTFOUND -9 +#define CFE_ERR_ENVREADONLY -10 + +#define CFE_ERR_NOTELF -11 +#define CFE_ERR_NOT32BIT -12 +#define CFE_ERR_WRONGENDIAN -13 +#define CFE_ERR_BADELFVERS -14 +#define CFE_ERR_NOTMIPS -15 +#define CFE_ERR_BADELFFMT -16 +#define CFE_ERR_BADADDR -17 + +#define CFE_ERR_FILENOTFOUND -18 +#define CFE_ERR_UNSUPPORTED -19 + +#define CFE_ERR_HOSTUNKNOWN -20 + +#define CFE_ERR_TIMEOUT -21 + +#define CFE_ERR_PROTOCOLERR -22 + +#define CFE_ERR_NETDOWN -23 +#define CFE_ERR_NONAMESERVER -24 + +#define CFE_ERR_NOHANDLES -25 +#define CFE_ERR_ALREADYBOUND -26 + +#define CFE_ERR_CANNOTSET -27 +#define CFE_ERR_NOMORE -28 +#define CFE_ERR_BADFILESYS -29 +#define CFE_ERR_FSNOTAVAIL -30 + +#define CFE_ERR_INVBOOTBLOCK -31 +#define CFE_ERR_WRONGDEVTYPE -32 +#define CFE_ERR_BBCHECKSUM -33 +#define CFE_ERR_BOOTPROGCHKSUM -34 + +#define CFE_ERR_LDRNOTAVAIL -35 + +#define CFE_ERR_NOTREADY -36 + +#define CFE_ERR_GETMEM -37 +#define CFE_ERR_SETMEM -38 + +#define CFE_ERR_NOTCONN -39 +#define CFE_ERR_ADDRINUSE -40 diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h new file mode 100644 index 000000000000..d74a8a4ca861 --- /dev/null +++ b/arch/mips/include/asm/gcmpregs.h @@ -0,0 +1,117 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000, 07 MIPS Technologies, Inc. + * + * Multiprocessor Subsystem Register Definitions + * + */ +#ifndef _ASM_GCMPREGS_H +#define _ASM_GCMPREGS_H + + +/* Offsets to major blocks within GCMP from GCMP base */ +#define GCMP_GCB_OFS 0x0000 /* Global Control Block */ +#define GCMP_CLCB_OFS 0x2000 /* Core Local Control Block */ +#define GCMP_COCB_OFS 0x4000 /* Core Other Control Block */ +#define GCMP_GDB_OFS 0x8000 /* Global Debug Block */ + +/* Offsets to individual GCMP registers from GCMP base */ +#define GCMPOFS(block, tag, reg) (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS) + +#define GCMPGCBOFS(reg) GCMPOFS(GCB, GCB, reg) +#define GCMPCLCBOFS(reg) GCMPOFS(CLCB, CCB, reg) +#define GCMPCOCBOFS(reg) GCMPOFS(COCB, CCB, reg) +#define GCMPGDBOFS(reg) GCMPOFS(GDB, GDB, reg) + +/* GCMP register access */ +#define GCMPGCB(reg) REGP(_gcmp_base, GCMPGCBOFS(reg)) +#define GCMPCLCB(reg) REGP(_gcmp_base, GCMPCLCBOFS(reg)) +#define GCMPCOCB(reg) REGP(_gcmp_base, GCMPCOCBOFS(reg)) +#define GCMPGDB(reg) REGP(_gcmp_base, GCMPGDBOFS(reg)) + +/* Mask generation */ +#define GCMPMSK(block, reg, bits) (MSK(bits)< + +#endif /* __ASM_MIPS_GPIO_H */ diff --git a/arch/mips/include/asm/gt64120.h b/arch/mips/include/asm/gt64120.h new file mode 100644 index 000000000000..e64b41093c49 --- /dev/null +++ b/arch/mips/include/asm/gt64120.h @@ -0,0 +1,580 @@ +/* + * Copyright (C) 2000, 2004, 2005 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki + * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#ifndef _ASM_GT64120_H +#define _ASM_GT64120_H + +#include + +#include +#include + +#define MSK(n) ((1 << (n)) - 1) + +/* + * Register offset addresses + */ +/* CPU Configuration. */ +#define GT_CPU_OFS 0x000 + +#define GT_MULTI_OFS 0x120 + +/* CPU Address Decode. */ +#define GT_SCS10LD_OFS 0x008 +#define GT_SCS10HD_OFS 0x010 +#define GT_SCS32LD_OFS 0x018 +#define GT_SCS32HD_OFS 0x020 +#define GT_CS20LD_OFS 0x028 +#define GT_CS20HD_OFS 0x030 +#define GT_CS3BOOTLD_OFS 0x038 +#define GT_CS3BOOTHD_OFS 0x040 +#define GT_PCI0IOLD_OFS 0x048 +#define GT_PCI0IOHD_OFS 0x050 +#define GT_PCI0M0LD_OFS 0x058 +#define GT_PCI0M0HD_OFS 0x060 +#define GT_ISD_OFS 0x068 + +#define GT_PCI0M1LD_OFS 0x080 +#define GT_PCI0M1HD_OFS 0x088 +#define GT_PCI1IOLD_OFS 0x090 +#define GT_PCI1IOHD_OFS 0x098 +#define GT_PCI1M0LD_OFS 0x0a0 +#define GT_PCI1M0HD_OFS 0x0a8 +#define GT_PCI1M1LD_OFS 0x0b0 +#define GT_PCI1M1HD_OFS 0x0b8 +#define GT_PCI1M1LD_OFS 0x0b0 +#define GT_PCI1M1HD_OFS 0x0b8 + +#define GT_SCS10AR_OFS 0x0d0 +#define GT_SCS32AR_OFS 0x0d8 +#define GT_CS20R_OFS 0x0e0 +#define GT_CS3BOOTR_OFS 0x0e8 + +#define GT_PCI0IOREMAP_OFS 0x0f0 +#define GT_PCI0M0REMAP_OFS 0x0f8 +#define GT_PCI0M1REMAP_OFS 0x100 +#define GT_PCI1IOREMAP_OFS 0x108 +#define GT_PCI1M0REMAP_OFS 0x110 +#define GT_PCI1M1REMAP_OFS 0x118 + +/* CPU Error Report. */ +#define GT_CPUERR_ADDRLO_OFS 0x070 +#define GT_CPUERR_ADDRHI_OFS 0x078 + +#define GT_CPUERR_DATALO_OFS 0x128 /* GT-64120A only */ +#define GT_CPUERR_DATAHI_OFS 0x130 /* GT-64120A only */ +#define GT_CPUERR_PARITY_OFS 0x138 /* GT-64120A only */ + +/* CPU Sync Barrier. */ +#define GT_PCI0SYNC_OFS 0x0c0 +#define GT_PCI1SYNC_OFS 0x0c8 + +/* SDRAM and Device Address Decode. */ +#define GT_SCS0LD_OFS 0x400 +#define GT_SCS0HD_OFS 0x404 +#define GT_SCS1LD_OFS 0x408 +#define GT_SCS1HD_OFS 0x40c +#define GT_SCS2LD_OFS 0x410 +#define GT_SCS2HD_OFS 0x414 +#define GT_SCS3LD_OFS 0x418 +#define GT_SCS3HD_OFS 0x41c +#define GT_CS0LD_OFS 0x420 +#define GT_CS0HD_OFS 0x424 +#define GT_CS1LD_OFS 0x428 +#define GT_CS1HD_OFS 0x42c +#define GT_CS2LD_OFS 0x430 +#define GT_CS2HD_OFS 0x434 +#define GT_CS3LD_OFS 0x438 +#define GT_CS3HD_OFS 0x43c +#define GT_BOOTLD_OFS 0x440 +#define GT_BOOTHD_OFS 0x444 + +#define GT_ADERR_OFS 0x470 + +/* SDRAM Configuration. */ +#define GT_SDRAM_CFG_OFS 0x448 + +#define GT_SDRAM_OPMODE_OFS 0x474 +#define GT_SDRAM_BM_OFS 0x478 +#define GT_SDRAM_ADDRDECODE_OFS 0x47c + +/* SDRAM Parameters. */ +#define GT_SDRAM_B0_OFS 0x44c +#define GT_SDRAM_B1_OFS 0x450 +#define GT_SDRAM_B2_OFS 0x454 +#define GT_SDRAM_B3_OFS 0x458 + +/* Device Parameters. */ +#define GT_DEV_B0_OFS 0x45c +#define GT_DEV_B1_OFS 0x460 +#define GT_DEV_B2_OFS 0x464 +#define GT_DEV_B3_OFS 0x468 +#define GT_DEV_BOOT_OFS 0x46c + +/* ECC. */ +#define GT_ECC_ERRDATALO 0x480 /* GT-64120A only */ +#define GT_ECC_ERRDATAHI 0x484 /* GT-64120A only */ +#define GT_ECC_MEM 0x488 /* GT-64120A only */ +#define GT_ECC_CALC 0x48c /* GT-64120A only */ +#define GT_ECC_ERRADDR 0x490 /* GT-64120A only */ + +/* DMA Record. */ +#define GT_DMA0_CNT_OFS 0x800 +#define GT_DMA1_CNT_OFS 0x804 +#define GT_DMA2_CNT_OFS 0x808 +#define GT_DMA3_CNT_OFS 0x80c +#define GT_DMA0_SA_OFS 0x810 +#define GT_DMA1_SA_OFS 0x814 +#define GT_DMA2_SA_OFS 0x818 +#define GT_DMA3_SA_OFS 0x81c +#define GT_DMA0_DA_OFS 0x820 +#define GT_DMA1_DA_OFS 0x824 +#define GT_DMA2_DA_OFS 0x828 +#define GT_DMA3_DA_OFS 0x82c +#define GT_DMA0_NEXT_OFS 0x830 +#define GT_DMA1_NEXT_OFS 0x834 +#define GT_DMA2_NEXT_OFS 0x838 +#define GT_DMA3_NEXT_OFS 0x83c + +#define GT_DMA0_CUR_OFS 0x870 +#define GT_DMA1_CUR_OFS 0x874 +#define GT_DMA2_CUR_OFS 0x878 +#define GT_DMA3_CUR_OFS 0x87c + +/* DMA Channel Control. */ +#define GT_DMA0_CTRL_OFS 0x840 +#define GT_DMA1_CTRL_OFS 0x844 +#define GT_DMA2_CTRL_OFS 0x848 +#define GT_DMA3_CTRL_OFS 0x84c + +/* DMA Arbiter. */ +#define GT_DMA_ARB_OFS 0x860 + +/* Timer/Counter. */ +#define GT_TC0_OFS 0x850 +#define GT_TC1_OFS 0x854 +#define GT_TC2_OFS 0x858 +#define GT_TC3_OFS 0x85c + +#define GT_TC_CONTROL_OFS 0x864 + +/* PCI Internal. */ +#define GT_PCI0_CMD_OFS 0xc00 +#define GT_PCI0_TOR_OFS 0xc04 +#define GT_PCI0_BS_SCS10_OFS 0xc08 +#define GT_PCI0_BS_SCS32_OFS 0xc0c +#define GT_PCI0_BS_CS20_OFS 0xc10 +#define GT_PCI0_BS_CS3BT_OFS 0xc14 + +#define GT_PCI1_IACK_OFS 0xc30 +#define GT_PCI0_IACK_OFS 0xc34 + +#define GT_PCI0_BARE_OFS 0xc3c +#define GT_PCI0_PREFMBR_OFS 0xc40 + +#define GT_PCI0_SCS10_BAR_OFS 0xc48 +#define GT_PCI0_SCS32_BAR_OFS 0xc4c +#define GT_PCI0_CS20_BAR_OFS 0xc50 +#define GT_PCI0_CS3BT_BAR_OFS 0xc54 +#define GT_PCI0_SSCS10_BAR_OFS 0xc58 +#define GT_PCI0_SSCS32_BAR_OFS 0xc5c + +#define GT_PCI0_SCS3BT_BAR_OFS 0xc64 + +#define GT_PCI1_CMD_OFS 0xc80 +#define GT_PCI1_TOR_OFS 0xc84 +#define GT_PCI1_BS_SCS10_OFS 0xc88 +#define GT_PCI1_BS_SCS32_OFS 0xc8c +#define GT_PCI1_BS_CS20_OFS 0xc90 +#define GT_PCI1_BS_CS3BT_OFS 0xc94 + +#define GT_PCI1_BARE_OFS 0xcbc +#define GT_PCI1_PREFMBR_OFS 0xcc0 + +#define GT_PCI1_SCS10_BAR_OFS 0xcc8 +#define GT_PCI1_SCS32_BAR_OFS 0xccc +#define GT_PCI1_CS20_BAR_OFS 0xcd0 +#define GT_PCI1_CS3BT_BAR_OFS 0xcd4 +#define GT_PCI1_SSCS10_BAR_OFS 0xcd8 +#define GT_PCI1_SSCS32_BAR_OFS 0xcdc + +#define GT_PCI1_SCS3BT_BAR_OFS 0xce4 + +#define GT_PCI1_CFGADDR_OFS 0xcf0 +#define GT_PCI1_CFGDATA_OFS 0xcf4 +#define GT_PCI0_CFGADDR_OFS 0xcf8 +#define GT_PCI0_CFGDATA_OFS 0xcfc + +/* Interrupts. */ +#define GT_INTRCAUSE_OFS 0xc18 +#define GT_INTRMASK_OFS 0xc1c + +#define GT_PCI0_ICMASK_OFS 0xc24 +#define GT_PCI0_SERR0MASK_OFS 0xc28 + +#define GT_CPU_INTSEL_OFS 0xc70 +#define GT_PCI0_INTSEL_OFS 0xc74 + +#define GT_HINTRCAUSE_OFS 0xc98 +#define GT_HINTRMASK_OFS 0xc9c + +#define GT_PCI0_HICMASK_OFS 0xca4 +#define GT_PCI1_SERR1MASK_OFS 0xca8 + + +/* + * I2O Support Registers + */ +#define INBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x010 +#define INBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x014 +#define OUTBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x018 +#define OUTBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x01c +#define INBOUND_DOORBELL_REGISTER_PCI_SIDE 0x020 +#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x024 +#define INBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x028 +#define OUTBOUND_DOORBELL_REGISTER_PCI_SIDE 0x02c +#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x030 +#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x034 +#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x040 +#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x044 +#define QUEUE_CONTROL_REGISTER_PCI_SIDE 0x050 +#define QUEUE_BASE_ADDRESS_REGISTER_PCI_SIDE 0x054 +#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x060 +#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x064 +#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x068 +#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x06c +#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x070 +#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x074 +#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x078 +#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x07c + +#define INBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1c10 +#define INBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1c14 +#define OUTBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1c18 +#define OUTBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1c1c +#define INBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1c20 +#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1c24 +#define INBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1c28 +#define OUTBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1c2c +#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1c30 +#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1c34 +#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1c40 +#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1c44 +#define QUEUE_CONTROL_REGISTER_CPU_SIDE 0x1c50 +#define QUEUE_BASE_ADDRESS_REGISTER_CPU_SIDE 0x1c54 +#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c60 +#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c64 +#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c68 +#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c6c +#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c70 +#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c74 +#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c78 +#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c7c + +/* + * Register encodings + */ +#define GT_CPU_ENDIAN_SHF 12 +#define GT_CPU_ENDIAN_MSK (MSK(1) << GT_CPU_ENDIAN_SHF) +#define GT_CPU_ENDIAN_BIT GT_CPU_ENDIAN_MSK +#define GT_CPU_WR_SHF 16 +#define GT_CPU_WR_MSK (MSK(1) << GT_CPU_WR_SHF) +#define GT_CPU_WR_BIT GT_CPU_WR_MSK +#define GT_CPU_WR_DXDXDXDX 0 +#define GT_CPU_WR_DDDD 1 + + +#define GT_PCI_DCRM_SHF 21 +#define GT_PCI_LD_SHF 0 +#define GT_PCI_LD_MSK (MSK(15) << GT_PCI_LD_SHF) +#define GT_PCI_HD_SHF 0 +#define GT_PCI_HD_MSK (MSK(7) << GT_PCI_HD_SHF) +#define GT_PCI_REMAP_SHF 0 +#define GT_PCI_REMAP_MSK (MSK(11) << GT_PCI_REMAP_SHF) + + +#define GT_CFGADDR_CFGEN_SHF 31 +#define GT_CFGADDR_CFGEN_MSK (MSK(1) << GT_CFGADDR_CFGEN_SHF) +#define GT_CFGADDR_CFGEN_BIT GT_CFGADDR_CFGEN_MSK + +#define GT_CFGADDR_BUSNUM_SHF 16 +#define GT_CFGADDR_BUSNUM_MSK (MSK(8) << GT_CFGADDR_BUSNUM_SHF) + +#define GT_CFGADDR_DEVNUM_SHF 11 +#define GT_CFGADDR_DEVNUM_MSK (MSK(5) << GT_CFGADDR_DEVNUM_SHF) + +#define GT_CFGADDR_FUNCNUM_SHF 8 +#define GT_CFGADDR_FUNCNUM_MSK (MSK(3) << GT_CFGADDR_FUNCNUM_SHF) + +#define GT_CFGADDR_REGNUM_SHF 2 +#define GT_CFGADDR_REGNUM_MSK (MSK(6) << GT_CFGADDR_REGNUM_SHF) + + +#define GT_SDRAM_BM_ORDER_SHF 2 +#define GT_SDRAM_BM_ORDER_MSK (MSK(1) << GT_SDRAM_BM_ORDER_SHF) +#define GT_SDRAM_BM_ORDER_BIT GT_SDRAM_BM_ORDER_MSK +#define GT_SDRAM_BM_ORDER_SUB 1 +#define GT_SDRAM_BM_ORDER_LIN 0 + +#define GT_SDRAM_BM_RSVD_ALL1 0xffb + + +#define GT_SDRAM_ADDRDECODE_ADDR_SHF 0 +#define GT_SDRAM_ADDRDECODE_ADDR_MSK (MSK(3) << GT_SDRAM_ADDRDECODE_ADDR_SHF) +#define GT_SDRAM_ADDRDECODE_ADDR_0 0 +#define GT_SDRAM_ADDRDECODE_ADDR_1 1 +#define GT_SDRAM_ADDRDECODE_ADDR_2 2 +#define GT_SDRAM_ADDRDECODE_ADDR_3 3 +#define GT_SDRAM_ADDRDECODE_ADDR_4 4 +#define GT_SDRAM_ADDRDECODE_ADDR_5 5 +#define GT_SDRAM_ADDRDECODE_ADDR_6 6 +#define GT_SDRAM_ADDRDECODE_ADDR_7 7 + + +#define GT_SDRAM_B0_CASLAT_SHF 0 +#define GT_SDRAM_B0_CASLAT_MSK (MSK(2) << GT_SDRAM_B0__SHF) +#define GT_SDRAM_B0_CASLAT_2 1 +#define GT_SDRAM_B0_CASLAT_3 2 + +#define GT_SDRAM_B0_FTDIS_SHF 2 +#define GT_SDRAM_B0_FTDIS_MSK (MSK(1) << GT_SDRAM_B0_FTDIS_SHF) +#define GT_SDRAM_B0_FTDIS_BIT GT_SDRAM_B0_FTDIS_MSK + +#define GT_SDRAM_B0_SRASPRCHG_SHF 3 +#define GT_SDRAM_B0_SRASPRCHG_MSK (MSK(1) << GT_SDRAM_B0_SRASPRCHG_SHF) +#define GT_SDRAM_B0_SRASPRCHG_BIT GT_SDRAM_B0_SRASPRCHG_MSK +#define GT_SDRAM_B0_SRASPRCHG_2 0 +#define GT_SDRAM_B0_SRASPRCHG_3 1 + +#define GT_SDRAM_B0_B0COMPAB_SHF 4 +#define GT_SDRAM_B0_B0COMPAB_MSK (MSK(1) << GT_SDRAM_B0_B0COMPAB_SHF) +#define GT_SDRAM_B0_B0COMPAB_BIT GT_SDRAM_B0_B0COMPAB_MSK + +#define GT_SDRAM_B0_64BITINT_SHF 5 +#define GT_SDRAM_B0_64BITINT_MSK (MSK(1) << GT_SDRAM_B0_64BITINT_SHF) +#define GT_SDRAM_B0_64BITINT_BIT GT_SDRAM_B0_64BITINT_MSK +#define GT_SDRAM_B0_64BITINT_2 0 +#define GT_SDRAM_B0_64BITINT_4 1 + +#define GT_SDRAM_B0_BW_SHF 6 +#define GT_SDRAM_B0_BW_MSK (MSK(1) << GT_SDRAM_B0_BW_SHF) +#define GT_SDRAM_B0_BW_BIT GT_SDRAM_B0_BW_MSK +#define GT_SDRAM_B0_BW_32 0 +#define GT_SDRAM_B0_BW_64 1 + +#define GT_SDRAM_B0_BLODD_SHF 7 +#define GT_SDRAM_B0_BLODD_MSK (MSK(1) << GT_SDRAM_B0_BLODD_SHF) +#define GT_SDRAM_B0_BLODD_BIT GT_SDRAM_B0_BLODD_MSK + +#define GT_SDRAM_B0_PAR_SHF 8 +#define GT_SDRAM_B0_PAR_MSK (MSK(1) << GT_SDRAM_B0_PAR_SHF) +#define GT_SDRAM_B0_PAR_BIT GT_SDRAM_B0_PAR_MSK + +#define GT_SDRAM_B0_BYPASS_SHF 9 +#define GT_SDRAM_B0_BYPASS_MSK (MSK(1) << GT_SDRAM_B0_BYPASS_SHF) +#define GT_SDRAM_B0_BYPASS_BIT GT_SDRAM_B0_BYPASS_MSK + +#define GT_SDRAM_B0_SRAS2SCAS_SHF 10 +#define GT_SDRAM_B0_SRAS2SCAS_MSK (MSK(1) << GT_SDRAM_B0_SRAS2SCAS_SHF) +#define GT_SDRAM_B0_SRAS2SCAS_BIT GT_SDRAM_B0_SRAS2SCAS_MSK +#define GT_SDRAM_B0_SRAS2SCAS_2 0 +#define GT_SDRAM_B0_SRAS2SCAS_3 1 + +#define GT_SDRAM_B0_SIZE_SHF 11 +#define GT_SDRAM_B0_SIZE_MSK (MSK(1) << GT_SDRAM_B0_SIZE_SHF) +#define GT_SDRAM_B0_SIZE_BIT GT_SDRAM_B0_SIZE_MSK +#define GT_SDRAM_B0_SIZE_16M 0 +#define GT_SDRAM_B0_SIZE_64M 1 + +#define GT_SDRAM_B0_EXTPAR_SHF 12 +#define GT_SDRAM_B0_EXTPAR_MSK (MSK(1) << GT_SDRAM_B0_EXTPAR_SHF) +#define GT_SDRAM_B0_EXTPAR_BIT GT_SDRAM_B0_EXTPAR_MSK + +#define GT_SDRAM_B0_BLEN_SHF 13 +#define GT_SDRAM_B0_BLEN_MSK (MSK(1) << GT_SDRAM_B0_BLEN_SHF) +#define GT_SDRAM_B0_BLEN_BIT GT_SDRAM_B0_BLEN_MSK +#define GT_SDRAM_B0_BLEN_8 0 +#define GT_SDRAM_B0_BLEN_4 1 + + +#define GT_SDRAM_CFG_REFINT_SHF 0 +#define GT_SDRAM_CFG_REFINT_MSK (MSK(14) << GT_SDRAM_CFG_REFINT_SHF) + +#define GT_SDRAM_CFG_NINTERLEAVE_SHF 14 +#define GT_SDRAM_CFG_NINTERLEAVE_MSK (MSK(1) << GT_SDRAM_CFG_NINTERLEAVE_SHF) +#define GT_SDRAM_CFG_NINTERLEAVE_BIT GT_SDRAM_CFG_NINTERLEAVE_MSK + +#define GT_SDRAM_CFG_RMW_SHF 15 +#define GT_SDRAM_CFG_RMW_MSK (MSK(1) << GT_SDRAM_CFG_RMW_SHF) +#define GT_SDRAM_CFG_RMW_BIT GT_SDRAM_CFG_RMW_MSK + +#define GT_SDRAM_CFG_NONSTAGREF_SHF 16 +#define GT_SDRAM_CFG_NONSTAGREF_MSK (MSK(1) << GT_SDRAM_CFG_NONSTAGREF_SHF) +#define GT_SDRAM_CFG_NONSTAGREF_BIT GT_SDRAM_CFG_NONSTAGREF_MSK + +#define GT_SDRAM_CFG_DUPCNTL_SHF 19 +#define GT_SDRAM_CFG_DUPCNTL_MSK (MSK(1) << GT_SDRAM_CFG_DUPCNTL_SHF) +#define GT_SDRAM_CFG_DUPCNTL_BIT GT_SDRAM_CFG_DUPCNTL_MSK + +#define GT_SDRAM_CFG_DUPBA_SHF 20 +#define GT_SDRAM_CFG_DUPBA_MSK (MSK(1) << GT_SDRAM_CFG_DUPBA_SHF) +#define GT_SDRAM_CFG_DUPBA_BIT GT_SDRAM_CFG_DUPBA_MSK + +#define GT_SDRAM_CFG_DUPEOT0_SHF 21 +#define GT_SDRAM_CFG_DUPEOT0_MSK (MSK(1) << GT_SDRAM_CFG_DUPEOT0_SHF) +#define GT_SDRAM_CFG_DUPEOT0_BIT GT_SDRAM_CFG_DUPEOT0_MSK + +#define GT_SDRAM_CFG_DUPEOT1_SHF 22 +#define GT_SDRAM_CFG_DUPEOT1_MSK (MSK(1) << GT_SDRAM_CFG_DUPEOT1_SHF) +#define GT_SDRAM_CFG_DUPEOT1_BIT GT_SDRAM_CFG_DUPEOT1_MSK + +#define GT_SDRAM_OPMODE_OP_SHF 0 +#define GT_SDRAM_OPMODE_OP_MSK (MSK(3) << GT_SDRAM_OPMODE_OP_SHF) +#define GT_SDRAM_OPMODE_OP_NORMAL 0 +#define GT_SDRAM_OPMODE_OP_NOP 1 +#define GT_SDRAM_OPMODE_OP_PRCHG 2 +#define GT_SDRAM_OPMODE_OP_MODE 3 +#define GT_SDRAM_OPMODE_OP_CBR 4 + +#define GT_TC_CONTROL_ENTC0_SHF 0 +#define GT_TC_CONTROL_ENTC0_MSK (MSK(1) << GT_TC_CONTROL_ENTC0_SHF) +#define GT_TC_CONTROL_ENTC0_BIT GT_TC_CONTROL_ENTC0_MSK +#define GT_TC_CONTROL_SELTC0_SHF 1 +#define GT_TC_CONTROL_SELTC0_MSK (MSK(1) << GT_TC_CONTROL_SELTC0_SHF) +#define GT_TC_CONTROL_SELTC0_BIT GT_TC_CONTROL_SELTC0_MSK + + +#define GT_PCI0_BARE_SWSCS3BOOTDIS_SHF 0 +#define GT_PCI0_BARE_SWSCS3BOOTDIS_MSK (MSK(1) << GT_PCI0_BARE_SWSCS3BOOTDIS_SHF) +#define GT_PCI0_BARE_SWSCS3BOOTDIS_BIT GT_PCI0_BARE_SWSCS3BOOTDIS_MSK + +#define GT_PCI0_BARE_SWSCS32DIS_SHF 1 +#define GT_PCI0_BARE_SWSCS32DIS_MSK (MSK(1) << GT_PCI0_BARE_SWSCS32DIS_SHF) +#define GT_PCI0_BARE_SWSCS32DIS_BIT GT_PCI0_BARE_SWSCS32DIS_MSK + +#define GT_PCI0_BARE_SWSCS10DIS_SHF 2 +#define GT_PCI0_BARE_SWSCS10DIS_MSK (MSK(1) << GT_PCI0_BARE_SWSCS10DIS_SHF) +#define GT_PCI0_BARE_SWSCS10DIS_BIT GT_PCI0_BARE_SWSCS10DIS_MSK + +#define GT_PCI0_BARE_INTIODIS_SHF 3 +#define GT_PCI0_BARE_INTIODIS_MSK (MSK(1) << GT_PCI0_BARE_INTIODIS_SHF) +#define GT_PCI0_BARE_INTIODIS_BIT GT_PCI0_BARE_INTIODIS_MSK + +#define GT_PCI0_BARE_INTMEMDIS_SHF 4 +#define GT_PCI0_BARE_INTMEMDIS_MSK (MSK(1) << GT_PCI0_BARE_INTMEMDIS_SHF) +#define GT_PCI0_BARE_INTMEMDIS_BIT GT_PCI0_BARE_INTMEMDIS_MSK + +#define GT_PCI0_BARE_CS3BOOTDIS_SHF 5 +#define GT_PCI0_BARE_CS3BOOTDIS_MSK (MSK(1) << GT_PCI0_BARE_CS3BOOTDIS_SHF) +#define GT_PCI0_BARE_CS3BOOTDIS_BIT GT_PCI0_BARE_CS3BOOTDIS_MSK + +#define GT_PCI0_BARE_CS20DIS_SHF 6 +#define GT_PCI0_BARE_CS20DIS_MSK (MSK(1) << GT_PCI0_BARE_CS20DIS_SHF) +#define GT_PCI0_BARE_CS20DIS_BIT GT_PCI0_BARE_CS20DIS_MSK + +#define GT_PCI0_BARE_SCS32DIS_SHF 7 +#define GT_PCI0_BARE_SCS32DIS_MSK (MSK(1) << GT_PCI0_BARE_SCS32DIS_SHF) +#define GT_PCI0_BARE_SCS32DIS_BIT GT_PCI0_BARE_SCS32DIS_MSK + +#define GT_PCI0_BARE_SCS10DIS_SHF 8 +#define GT_PCI0_BARE_SCS10DIS_MSK (MSK(1) << GT_PCI0_BARE_SCS10DIS_SHF) +#define GT_PCI0_BARE_SCS10DIS_BIT GT_PCI0_BARE_SCS10DIS_MSK + + +#define GT_INTRCAUSE_MASABORT0_SHF 18 +#define GT_INTRCAUSE_MASABORT0_MSK (MSK(1) << GT_INTRCAUSE_MASABORT0_SHF) +#define GT_INTRCAUSE_MASABORT0_BIT GT_INTRCAUSE_MASABORT0_MSK + +#define GT_INTRCAUSE_TARABORT0_SHF 19 +#define GT_INTRCAUSE_TARABORT0_MSK (MSK(1) << GT_INTRCAUSE_TARABORT0_SHF) +#define GT_INTRCAUSE_TARABORT0_BIT GT_INTRCAUSE_TARABORT0_MSK + + +#define GT_PCI0_CFGADDR_REGNUM_SHF 2 +#define GT_PCI0_CFGADDR_REGNUM_MSK (MSK(6) << GT_PCI0_CFGADDR_REGNUM_SHF) +#define GT_PCI0_CFGADDR_FUNCTNUM_SHF 8 +#define GT_PCI0_CFGADDR_FUNCTNUM_MSK (MSK(3) << GT_PCI0_CFGADDR_FUNCTNUM_SHF) +#define GT_PCI0_CFGADDR_DEVNUM_SHF 11 +#define GT_PCI0_CFGADDR_DEVNUM_MSK (MSK(5) << GT_PCI0_CFGADDR_DEVNUM_SHF) +#define GT_PCI0_CFGADDR_BUSNUM_SHF 16 +#define GT_PCI0_CFGADDR_BUSNUM_MSK (MSK(8) << GT_PCI0_CFGADDR_BUSNUM_SHF) +#define GT_PCI0_CFGADDR_CONFIGEN_SHF 31 +#define GT_PCI0_CFGADDR_CONFIGEN_MSK (MSK(1) << GT_PCI0_CFGADDR_CONFIGEN_SHF) +#define GT_PCI0_CFGADDR_CONFIGEN_BIT GT_PCI0_CFGADDR_CONFIGEN_MSK + +#define GT_PCI0_CMD_MBYTESWAP_SHF 0 +#define GT_PCI0_CMD_MBYTESWAP_MSK (MSK(1) << GT_PCI0_CMD_MBYTESWAP_SHF) +#define GT_PCI0_CMD_MBYTESWAP_BIT GT_PCI0_CMD_MBYTESWAP_MSK +#define GT_PCI0_CMD_MWORDSWAP_SHF 10 +#define GT_PCI0_CMD_MWORDSWAP_MSK (MSK(1) << GT_PCI0_CMD_MWORDSWAP_SHF) +#define GT_PCI0_CMD_MWORDSWAP_BIT GT_PCI0_CMD_MWORDSWAP_MSK +#define GT_PCI0_CMD_SBYTESWAP_SHF 16 +#define GT_PCI0_CMD_SBYTESWAP_MSK (MSK(1) << GT_PCI0_CMD_SBYTESWAP_SHF) +#define GT_PCI0_CMD_SBYTESWAP_BIT GT_PCI0_CMD_SBYTESWAP_MSK +#define GT_PCI0_CMD_SWORDSWAP_SHF 11 +#define GT_PCI0_CMD_SWORDSWAP_MSK (MSK(1) << GT_PCI0_CMD_SWORDSWAP_SHF) +#define GT_PCI0_CMD_SWORDSWAP_BIT GT_PCI0_CMD_SWORDSWAP_MSK + +#define GT_INTR_T0EXP_SHF 8 +#define GT_INTR_T0EXP_MSK (MSK(1) << GT_INTR_T0EXP_SHF) +#define GT_INTR_T0EXP_BIT GT_INTR_T0EXP_MSK +#define GT_INTR_RETRYCTR0_SHF 20 +#define GT_INTR_RETRYCTR0_MSK (MSK(1) << GT_INTR_RETRYCTR0_SHF) +#define GT_INTR_RETRYCTR0_BIT GT_INTR_RETRYCTR0_MSK + +/* + * Misc + */ +#define GT_DEF_PCI0_IO_BASE 0x10000000UL +#define GT_DEF_PCI0_IO_SIZE 0x02000000UL +#define GT_DEF_PCI0_MEM0_BASE 0x12000000UL +#define GT_DEF_PCI0_MEM0_SIZE 0x02000000UL +#define GT_DEF_BASE 0x14000000UL + +#define GT_MAX_BANKSIZE (256 * 1024 * 1024) /* Max 256MB bank */ +#define GT_LATTIM_MIN 6 /* Minimum lat */ + +/* + * The gt64120_dep.h file must define the following macros + * + * GT_READ(ofs, data_pointer) + * GT_WRITE(ofs, data) - read/write GT64120 registers in 32bit + * + * TIMER - gt64120 timer irq, temporary solution until + * full gt64120 cascade interrupt support is in place + */ + +#include + +/* + * Because of an error/peculiarity in the Galileo chip, we need to swap the + * bytes when running bigendian. We also provide non-swapping versions. + */ +#define __GT_READ(ofs) \ + (*(volatile u32 *)(GT64120_BASE+(ofs))) +#define __GT_WRITE(ofs, data) \ + do { *(volatile u32 *)(GT64120_BASE+(ofs)) = (data); } while (0) +#define GT_READ(ofs) le32_to_cpu(__GT_READ(ofs)) +#define GT_WRITE(ofs, data) __GT_WRITE(ofs, cpu_to_le32(data)) + +extern void gt641xx_set_base_clock(unsigned int clock); +extern int gt641xx_timer0_state(void); + +#endif /* _ASM_GT64120_H */ diff --git a/arch/mips/include/asm/hardirq.h b/arch/mips/include/asm/hardirq.h new file mode 100644 index 000000000000..90bf399e6dd9 --- /dev/null +++ b/arch/mips/include/asm/hardirq.h @@ -0,0 +1,24 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 98, 99, 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#ifndef _ASM_HARDIRQ_H +#define _ASM_HARDIRQ_H + +#include +#include + +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +extern void ack_bad_irq(unsigned int irq); + +#endif /* _ASM_HARDIRQ_H */ diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h new file mode 100644 index 000000000000..2de638f84c86 --- /dev/null +++ b/arch/mips/include/asm/hazards.h @@ -0,0 +1,271 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 04, 07 Ralf Baechle + * Copyright (C) MIPS Technologies, Inc. + * written by Ralf Baechle + */ +#ifndef _ASM_HAZARDS_H +#define _ASM_HAZARDS_H + +#ifdef __ASSEMBLY__ +#define ASMMACRO(name, code...) .macro name; code; .endm +#else + +#include + +#define ASMMACRO(name, code...) \ +__asm__(".macro " #name "; " #code "; .endm"); \ + \ +static inline void name(void) \ +{ \ + __asm__ __volatile__ (#name); \ +} + +/* + * MIPS R2 instruction hazard barrier. Needs to be called as a subroutine. + */ +extern void mips_ihb(void); + +#endif + +ASMMACRO(_ssnop, + sll $0, $0, 1 + ) + +ASMMACRO(_ehb, + sll $0, $0, 3 + ) + +/* + * TLB hazards + */ +#if defined(CONFIG_CPU_MIPSR2) + +/* + * MIPSR2 defines ehb for hazard avoidance + */ + +ASMMACRO(mtc0_tlbw_hazard, + _ehb + ) +ASMMACRO(tlbw_use_hazard, + _ehb + ) +ASMMACRO(tlb_probe_hazard, + _ehb + ) +ASMMACRO(irq_enable_hazard, + _ehb + ) +ASMMACRO(irq_disable_hazard, + _ehb + ) +ASMMACRO(back_to_back_c0_hazard, + _ehb + ) +/* + * gcc has a tradition of misscompiling the previous construct using the + * address of a label as argument to inline assembler. Gas otoh has the + * annoying difference between la and dla which are only usable for 32-bit + * rsp. 64-bit code, so can't be used without conditional compilation. + * The alterantive is switching the assembler to 64-bit code which happens + * to work right even for 32-bit code ... + */ +#define instruction_hazard() \ +do { \ + unsigned long tmp; \ + \ + __asm__ __volatile__( \ + " .set mips64r2 \n" \ + " dla %0, 1f \n" \ + " jr.hb %0 \n" \ + " .set mips0 \n" \ + "1: \n" \ + : "=r" (tmp)); \ +} while (0) + +#elif defined(CONFIG_CPU_MIPSR1) + +/* + * These are slightly complicated by the fact that we guarantee R1 kernels to + * run fine on R2 processors. + */ +ASMMACRO(mtc0_tlbw_hazard, + _ssnop; _ssnop; _ehb + ) +ASMMACRO(tlbw_use_hazard, + _ssnop; _ssnop; _ssnop; _ehb + ) +ASMMACRO(tlb_probe_hazard, + _ssnop; _ssnop; _ssnop; _ehb + ) +ASMMACRO(irq_enable_hazard, + _ssnop; _ssnop; _ssnop; _ehb + ) +ASMMACRO(irq_disable_hazard, + _ssnop; _ssnop; _ssnop; _ehb + ) +ASMMACRO(back_to_back_c0_hazard, + _ssnop; _ssnop; _ssnop; _ehb + ) +/* + * gcc has a tradition of misscompiling the previous construct using the + * address of a label as argument to inline assembler. Gas otoh has the + * annoying difference between la and dla which are only usable for 32-bit + * rsp. 64-bit code, so can't be used without conditional compilation. + * The alterantive is switching the assembler to 64-bit code which happens + * to work right even for 32-bit code ... + */ +#define __instruction_hazard() \ +do { \ + unsigned long tmp; \ + \ + __asm__ __volatile__( \ + " .set mips64r2 \n" \ + " dla %0, 1f \n" \ + " jr.hb %0 \n" \ + " .set mips0 \n" \ + "1: \n" \ + : "=r" (tmp)); \ +} while (0) + +#define instruction_hazard() \ +do { \ + if (cpu_has_mips_r2) \ + __instruction_hazard(); \ +} while (0) + +#elif defined(CONFIG_CPU_R10000) + +/* + * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. + */ + +ASMMACRO(mtc0_tlbw_hazard, + ) +ASMMACRO(tlbw_use_hazard, + ) +ASMMACRO(tlb_probe_hazard, + ) +ASMMACRO(irq_enable_hazard, + ) +ASMMACRO(irq_disable_hazard, + ) +ASMMACRO(back_to_back_c0_hazard, + ) +#define instruction_hazard() do { } while (0) + +#elif defined(CONFIG_CPU_RM9000) + +/* + * RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent + * use of the JTLB for instructions should not occur for 4 cpu cycles and use + * for data translations should not occur for 3 cpu cycles. + */ + +ASMMACRO(mtc0_tlbw_hazard, + _ssnop; _ssnop; _ssnop; _ssnop + ) +ASMMACRO(tlbw_use_hazard, + _ssnop; _ssnop; _ssnop; _ssnop + ) +ASMMACRO(tlb_probe_hazard, + _ssnop; _ssnop; _ssnop; _ssnop + ) +ASMMACRO(irq_enable_hazard, + ) +ASMMACRO(irq_disable_hazard, + ) +ASMMACRO(back_to_back_c0_hazard, + ) +#define instruction_hazard() do { } while (0) + +#elif defined(CONFIG_CPU_SB1) + +/* + * Mostly like R4000 for historic reasons + */ +ASMMACRO(mtc0_tlbw_hazard, + ) +ASMMACRO(tlbw_use_hazard, + ) +ASMMACRO(tlb_probe_hazard, + ) +ASMMACRO(irq_enable_hazard, + ) +ASMMACRO(irq_disable_hazard, + _ssnop; _ssnop; _ssnop + ) +ASMMACRO(back_to_back_c0_hazard, + ) +#define instruction_hazard() do { } while (0) + +#else + +/* + * Finally the catchall case for all other processors including R4000, R4400, + * R4600, R4700, R5000, RM7000, NEC VR41xx etc. + * + * The taken branch will result in a two cycle penalty for the two killed + * instructions on R4000 / R4400. Other processors only have a single cycle + * hazard so this is nice trick to have an optimal code for a range of + * processors. + */ +ASMMACRO(mtc0_tlbw_hazard, + nop; nop + ) +ASMMACRO(tlbw_use_hazard, + nop; nop; nop + ) +ASMMACRO(tlb_probe_hazard, + nop; nop; nop + ) +ASMMACRO(irq_enable_hazard, + _ssnop; _ssnop; _ssnop; + ) +ASMMACRO(irq_disable_hazard, + nop; nop; nop + ) +ASMMACRO(back_to_back_c0_hazard, + _ssnop; _ssnop; _ssnop; + ) +#define instruction_hazard() do { } while (0) + +#endif + + +/* FPU hazards */ + +#if defined(CONFIG_CPU_SB1) +ASMMACRO(enable_fpu_hazard, + .set push; + .set mips64; + .set noreorder; + _ssnop; + bnezl $0, .+4; + _ssnop; + .set pop +) +ASMMACRO(disable_fpu_hazard, +) + +#elif defined(CONFIG_CPU_MIPSR2) +ASMMACRO(enable_fpu_hazard, + _ehb +) +ASMMACRO(disable_fpu_hazard, + _ehb +) +#else +ASMMACRO(enable_fpu_hazard, + nop; nop; nop; nop +) +ASMMACRO(disable_fpu_hazard, + _ehb +) +#endif + +#endif /* _ASM_HAZARDS_H */ diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h new file mode 100644 index 000000000000..4374ab2adc75 --- /dev/null +++ b/arch/mips/include/asm/highmem.h @@ -0,0 +1,67 @@ +/* + * highmem.h: virtual kernel memory mappings for high memory + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar + */ +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include + +/* undef for production */ +#define HIGHMEM_DEBUG 1 + +/* declarations for highmem.c */ +extern unsigned long highstart_pfn, highend_pfn; + +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +#define LAST_PKMAP 1024 +#define LAST_PKMAP_MASK (LAST_PKMAP-1) +#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +extern void * kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +extern void *__kmap(struct page *page); +extern void __kunmap(struct page *page); +extern void *__kmap_atomic(struct page *page, enum km_type type); +extern void __kunmap_atomic(void *kvaddr, enum km_type type); +extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type); +extern struct page *__kmap_atomic_to_page(void *ptr); + +#define kmap __kmap +#define kunmap __kunmap +#define kmap_atomic __kmap_atomic +#define kunmap_atomic __kunmap_atomic +#define kmap_atomic_to_page __kmap_atomic_to_page + +#define flush_cache_kmaps() flush_cache_all() + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/mips/include/asm/hw_irq.h b/arch/mips/include/asm/hw_irq.h new file mode 100644 index 000000000000..aca05a43a97b --- /dev/null +++ b/arch/mips/include/asm/hw_irq.h @@ -0,0 +1,20 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000, 2001, 2002 by Ralf Baechle + */ +#ifndef __ASM_HW_IRQ_H +#define __ASM_HW_IRQ_H + +#include + +extern atomic_t irq_err_count; + +/* + * interrupt-retrigger: NOP for now. This may not be apropriate for all + * machines, we'll see ... + */ + +#endif /* __ASM_HW_IRQ_H */ diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h new file mode 100644 index 000000000000..5dabc870b322 --- /dev/null +++ b/arch/mips/include/asm/i8253.h @@ -0,0 +1,21 @@ +/* + * Machine specific IO port address definition for generic. + * Written by Osamu Tomita + */ +#ifndef __ASM_I8253_H +#define __ASM_I8253_H + +#include + +/* i8253A PIT registers */ +#define PIT_MODE 0x43 +#define PIT_CH0 0x40 +#define PIT_CH2 0x42 + +#define PIT_TICK_RATE 1193182UL + +extern spinlock_t i8253_lock; + +extern void setup_pit_timer(void); + +#endif /* __ASM_I8253_H */ diff --git a/arch/mips/include/asm/i8259.h b/arch/mips/include/asm/i8259.h new file mode 100644 index 000000000000..8572a2d90484 --- /dev/null +++ b/arch/mips/include/asm/i8259.h @@ -0,0 +1,86 @@ +/* + * include/asm-mips/i8259.h + * + * i8259A interrupt definitions. + * + * Copyright (C) 2003 Maciej W. Rozycki + * Copyright (C) 2003 Ralf Baechle + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_I8259_H +#define _ASM_I8259_H + +#include +#include + +#include +#include + +/* i8259A PIC registers */ +#define PIC_MASTER_CMD 0x20 +#define PIC_MASTER_IMR 0x21 +#define PIC_MASTER_ISR PIC_MASTER_CMD +#define PIC_MASTER_POLL PIC_MASTER_ISR +#define PIC_MASTER_OCW3 PIC_MASTER_ISR +#define PIC_SLAVE_CMD 0xa0 +#define PIC_SLAVE_IMR 0xa1 + +/* i8259A PIC related value */ +#define PIC_CASCADE_IR 2 +#define MASTER_ICW4_DEFAULT 0x01 +#define SLAVE_ICW4_DEFAULT 0x01 +#define PIC_ICW4_AEOI 2 + +extern spinlock_t i8259A_lock; + +extern int i8259A_irq_pending(unsigned int irq); +extern void make_8259A_irq(unsigned int irq); + +extern void init_i8259_irqs(void); + +/* + * Do the traditional i8259 interrupt polling thing. This is for the few + * cases where no better interrupt acknowledge method is available and we + * absolutely must touch the i8259. + */ +static inline int i8259_irq(void) +{ + int irq; + + spin_lock(&i8259A_lock); + + /* Perform an interrupt acknowledge cycle on controller 1. */ + outb(0x0C, PIC_MASTER_CMD); /* prepare for poll */ + irq = inb(PIC_MASTER_CMD) & 7; + if (irq == PIC_CASCADE_IR) { + /* + * Interrupt is cascaded so perform interrupt + * acknowledge on controller 2. + */ + outb(0x0C, PIC_SLAVE_CMD); /* prepare for poll */ + irq = (inb(PIC_SLAVE_CMD) & 7) + 8; + } + + if (unlikely(irq == 7)) { + /* + * This may be a spurious interrupt. + * + * Read the interrupt status register (ISR). If the most + * significant bit is not set then there is no valid + * interrupt. + */ + outb(0x0B, PIC_MASTER_ISR); /* ISR register */ + if(~inb(PIC_MASTER_ISR) & 0x80) + irq = -1; + } + + spin_unlock(&i8259A_lock); + + return likely(irq >= 0) ? irq + I8259A_IRQ_BASE : irq; +} + +#endif /* _ASM_I8259_H */ diff --git a/arch/mips/include/asm/ide.h b/arch/mips/include/asm/ide.h new file mode 100644 index 000000000000..bb674c3b0303 --- /dev/null +++ b/arch/mips/include/asm/ide.h @@ -0,0 +1,13 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * This file contains the MIPS architecture specific IDE code. + */ +#ifndef __ASM_IDE_H +#define __ASM_IDE_H + +#include + +#endif /* __ASM_IDE_H */ diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h new file mode 100644 index 000000000000..6489f00731ca --- /dev/null +++ b/arch/mips/include/asm/inst.h @@ -0,0 +1,394 @@ +/* + * Format of an instruction in memory. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 2000 by Ralf Baechle + * Copyright (C) 2006 by Thiemo Seufer + */ +#ifndef _ASM_INST_H +#define _ASM_INST_H + +/* + * Major opcodes; before MIPS IV cop1x was called cop3. + */ +enum major_op { + spec_op, bcond_op, j_op, jal_op, + beq_op, bne_op, blez_op, bgtz_op, + addi_op, addiu_op, slti_op, sltiu_op, + andi_op, ori_op, xori_op, lui_op, + cop0_op, cop1_op, cop2_op, cop1x_op, + beql_op, bnel_op, blezl_op, bgtzl_op, + daddi_op, daddiu_op, ldl_op, ldr_op, + spec2_op, jalx_op, mdmx_op, spec3_op, + lb_op, lh_op, lwl_op, lw_op, + lbu_op, lhu_op, lwr_op, lwu_op, + sb_op, sh_op, swl_op, sw_op, + sdl_op, sdr_op, swr_op, cache_op, + ll_op, lwc1_op, lwc2_op, pref_op, + lld_op, ldc1_op, ldc2_op, ld_op, + sc_op, swc1_op, swc2_op, major_3b_op, + scd_op, sdc1_op, sdc2_op, sd_op +}; + +/* + * func field of spec opcode. + */ +enum spec_op { + sll_op, movc_op, srl_op, sra_op, + sllv_op, pmon_op, srlv_op, srav_op, + jr_op, jalr_op, movz_op, movn_op, + syscall_op, break_op, spim_op, sync_op, + mfhi_op, mthi_op, mflo_op, mtlo_op, + dsllv_op, spec2_unused_op, dsrlv_op, dsrav_op, + mult_op, multu_op, div_op, divu_op, + dmult_op, dmultu_op, ddiv_op, ddivu_op, + add_op, addu_op, sub_op, subu_op, + and_op, or_op, xor_op, nor_op, + spec3_unused_op, spec4_unused_op, slt_op, sltu_op, + dadd_op, daddu_op, dsub_op, dsubu_op, + tge_op, tgeu_op, tlt_op, tltu_op, + teq_op, spec5_unused_op, tne_op, spec6_unused_op, + dsll_op, spec7_unused_op, dsrl_op, dsra_op, + dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op +}; + +/* + * func field of spec2 opcode. + */ +enum spec2_op { + madd_op, maddu_op, mul_op, spec2_3_unused_op, + msub_op, msubu_op, /* more unused ops */ + clz_op = 0x20, clo_op, + dclz_op = 0x24, dclo_op, + sdbpp_op = 0x3f +}; + +/* + * func field of spec3 opcode. + */ +enum spec3_op { + ext_op, dextm_op, dextu_op, dext_op, + ins_op, dinsm_op, dinsu_op, dins_op, + bshfl_op = 0x20, + dbshfl_op = 0x24, + rdhwr_op = 0x3b +}; + +/* + * rt field of bcond opcodes. + */ +enum rt_op { + bltz_op, bgez_op, bltzl_op, bgezl_op, + spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07, + tgei_op, tgeiu_op, tlti_op, tltiu_op, + teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op, + bltzal_op, bgezal_op, bltzall_op, bgezall_op, + rt_op_0x14, rt_op_0x15, rt_op_0x16, rt_op_0x17, + rt_op_0x18, rt_op_0x19, rt_op_0x1a, rt_op_0x1b, + bposge32_op, rt_op_0x1d, rt_op_0x1e, rt_op_0x1f +}; + +/* + * rs field of cop opcodes. + */ +enum cop_op { + mfc_op = 0x00, dmfc_op = 0x01, + cfc_op = 0x02, mtc_op = 0x04, + dmtc_op = 0x05, ctc_op = 0x06, + bc_op = 0x08, cop_op = 0x10, + copm_op = 0x18 +}; + +/* + * rt field of cop.bc_op opcodes + */ +enum bcop_op { + bcf_op, bct_op, bcfl_op, bctl_op +}; + +/* + * func field of cop0 coi opcodes. + */ +enum cop0_coi_func { + tlbr_op = 0x01, tlbwi_op = 0x02, + tlbwr_op = 0x06, tlbp_op = 0x08, + rfe_op = 0x10, eret_op = 0x18 +}; + +/* + * func field of cop0 com opcodes. + */ +enum cop0_com_func { + tlbr1_op = 0x01, tlbw_op = 0x02, + tlbp1_op = 0x08, dctr_op = 0x09, + dctw_op = 0x0a +}; + +/* + * fmt field of cop1 opcodes. + */ +enum cop1_fmt { + s_fmt, d_fmt, e_fmt, q_fmt, + w_fmt, l_fmt +}; + +/* + * func field of cop1 instructions using d, s or w format. + */ +enum cop1_sdw_func { + fadd_op = 0x00, fsub_op = 0x01, + fmul_op = 0x02, fdiv_op = 0x03, + fsqrt_op = 0x04, fabs_op = 0x05, + fmov_op = 0x06, fneg_op = 0x07, + froundl_op = 0x08, ftruncl_op = 0x09, + fceill_op = 0x0a, ffloorl_op = 0x0b, + fround_op = 0x0c, ftrunc_op = 0x0d, + fceil_op = 0x0e, ffloor_op = 0x0f, + fmovc_op = 0x11, fmovz_op = 0x12, + fmovn_op = 0x13, frecip_op = 0x15, + frsqrt_op = 0x16, fcvts_op = 0x20, + fcvtd_op = 0x21, fcvte_op = 0x22, + fcvtw_op = 0x24, fcvtl_op = 0x25, + fcmp_op = 0x30 +}; + +/* + * func field of cop1x opcodes (MIPS IV). + */ +enum cop1x_func { + lwxc1_op = 0x00, ldxc1_op = 0x01, + pfetch_op = 0x07, swxc1_op = 0x08, + sdxc1_op = 0x09, madd_s_op = 0x20, + madd_d_op = 0x21, madd_e_op = 0x22, + msub_s_op = 0x28, msub_d_op = 0x29, + msub_e_op = 0x2a, nmadd_s_op = 0x30, + nmadd_d_op = 0x31, nmadd_e_op = 0x32, + nmsub_s_op = 0x38, nmsub_d_op = 0x39, + nmsub_e_op = 0x3a +}; + +/* + * func field for mad opcodes (MIPS IV). + */ +enum mad_func { + madd_fp_op = 0x08, msub_fp_op = 0x0a, + nmadd_fp_op = 0x0c, nmsub_fp_op = 0x0e +}; + +/* + * Damn ... bitfields depend from byteorder :-( + */ +#ifdef __MIPSEB__ +struct j_format { /* Jump format */ + unsigned int opcode : 6; + unsigned int target : 26; +}; + +struct i_format { /* Immediate format (addi, lw, ...) */ + unsigned int opcode : 6; + unsigned int rs : 5; + unsigned int rt : 5; + signed int simmediate : 16; +}; + +struct u_format { /* Unsigned immediate format (ori, xori, ...) */ + unsigned int opcode : 6; + unsigned int rs : 5; + unsigned int rt : 5; + unsigned int uimmediate : 16; +}; + +struct c_format { /* Cache (>= R6000) format */ + unsigned int opcode : 6; + unsigned int rs : 5; + unsigned int c_op : 3; + unsigned int cache : 2; + unsigned int simmediate : 16; +}; + +struct r_format { /* Register format */ + unsigned int opcode : 6; + unsigned int rs : 5; + unsigned int rt : 5; + unsigned int rd : 5; + unsigned int re : 5; + unsigned int func : 6; +}; + +struct p_format { /* Performance counter format (R10000) */ + unsigned int opcode : 6; + unsigned int rs : 5; + unsigned int rt : 5; + unsigned int rd : 5; + unsigned int re : 5; + unsigned int func : 6; +}; + +struct f_format { /* FPU register format */ + unsigned int opcode : 6; + unsigned int : 1; + unsigned int fmt : 4; + unsigned int rt : 5; + unsigned int rd : 5; + unsigned int re : 5; + unsigned int func : 6; +}; + +struct ma_format { /* FPU multipy and add format (MIPS IV) */ + unsigned int opcode : 6; + unsigned int fr : 5; + unsigned int ft : 5; + unsigned int fs : 5; + unsigned int fd : 5; + unsigned int func : 4; + unsigned int fmt : 2; +}; + +#elif defined(__MIPSEL__) + +struct j_format { /* Jump format */ + unsigned int target : 26; + unsigned int opcode : 6; +}; + +struct i_format { /* Immediate format */ + signed int simmediate : 16; + unsigned int rt : 5; + unsigned int rs : 5; + unsigned int opcode : 6; +}; + +struct u_format { /* Unsigned immediate format */ + unsigned int uimmediate : 16; + unsigned int rt : 5; + unsigned int rs : 5; + unsigned int opcode : 6; +}; + +struct c_format { /* Cache (>= R6000) format */ + unsigned int simmediate : 16; + unsigned int cache : 2; + unsigned int c_op : 3; + unsigned int rs : 5; + unsigned int opcode : 6; +}; + +struct r_format { /* Register format */ + unsigned int func : 6; + unsigned int re : 5; + unsigned int rd : 5; + unsigned int rt : 5; + unsigned int rs : 5; + unsigned int opcode : 6; +}; + +struct p_format { /* Performance counter format (R10000) */ + unsigned int func : 6; + unsigned int re : 5; + unsigned int rd : 5; + unsigned int rt : 5; + unsigned int rs : 5; + unsigned int opcode : 6; +}; + +struct f_format { /* FPU register format */ + unsigned int func : 6; + unsigned int re : 5; + unsigned int rd : 5; + unsigned int rt : 5; + unsigned int fmt : 4; + unsigned int : 1; + unsigned int opcode : 6; +}; + +struct ma_format { /* FPU multipy and add format (MIPS IV) */ + unsigned int fmt : 2; + unsigned int func : 4; + unsigned int fd : 5; + unsigned int fs : 5; + unsigned int ft : 5; + unsigned int fr : 5; + unsigned int opcode : 6; +}; + +#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */ +#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?" +#endif + +union mips_instruction { + unsigned int word; + unsigned short halfword[2]; + unsigned char byte[4]; + struct j_format j_format; + struct i_format i_format; + struct u_format u_format; + struct c_format c_format; + struct r_format r_format; + struct f_format f_format; + struct ma_format ma_format; +}; + +/* HACHACHAHCAHC ... */ + +/* In case some other massaging is needed, keep MIPSInst as wrapper */ + +#define MIPSInst(x) x + +#define I_OPCODE_SFT 26 +#define MIPSInst_OPCODE(x) (MIPSInst(x) >> I_OPCODE_SFT) + +#define I_JTARGET_SFT 0 +#define MIPSInst_JTARGET(x) (MIPSInst(x) & 0x03ffffff) + +#define I_RS_SFT 21 +#define MIPSInst_RS(x) ((MIPSInst(x) & 0x03e00000) >> I_RS_SFT) + +#define I_RT_SFT 16 +#define MIPSInst_RT(x) ((MIPSInst(x) & 0x001f0000) >> I_RT_SFT) + +#define I_IMM_SFT 0 +#define MIPSInst_SIMM(x) ((int)((short)(MIPSInst(x) & 0xffff))) +#define MIPSInst_UIMM(x) (MIPSInst(x) & 0xffff) + +#define I_CACHEOP_SFT 18 +#define MIPSInst_CACHEOP(x) ((MIPSInst(x) & 0x001c0000) >> I_CACHEOP_SFT) + +#define I_CACHESEL_SFT 16 +#define MIPSInst_CACHESEL(x) ((MIPSInst(x) & 0x00030000) >> I_CACHESEL_SFT) + +#define I_RD_SFT 11 +#define MIPSInst_RD(x) ((MIPSInst(x) & 0x0000f800) >> I_RD_SFT) + +#define I_RE_SFT 6 +#define MIPSInst_RE(x) ((MIPSInst(x) & 0x000007c0) >> I_RE_SFT) + +#define I_FUNC_SFT 0 +#define MIPSInst_FUNC(x) (MIPSInst(x) & 0x0000003f) + +#define I_FFMT_SFT 21 +#define MIPSInst_FFMT(x) ((MIPSInst(x) & 0x01e00000) >> I_FFMT_SFT) + +#define I_FT_SFT 16 +#define MIPSInst_FT(x) ((MIPSInst(x) & 0x001f0000) >> I_FT_SFT) + +#define I_FS_SFT 11 +#define MIPSInst_FS(x) ((MIPSInst(x) & 0x0000f800) >> I_FS_SFT) + +#define I_FD_SFT 6 +#define MIPSInst_FD(x) ((MIPSInst(x) & 0x000007c0) >> I_FD_SFT) + +#define I_FR_SFT 21 +#define MIPSInst_FR(x) ((MIPSInst(x) & 0x03e00000) >> I_FR_SFT) + +#define I_FMA_FUNC_SFT 2 +#define MIPSInst_FMA_FUNC(x) ((MIPSInst(x) & 0x0000003c) >> I_FMA_FUNC_SFT) + +#define I_FMA_FFMT_SFT 0 +#define MIPSInst_FMA_FFMT(x) (MIPSInst(x) & 0x00000003) + +typedef unsigned int mips_instruction; + +#endif /* _ASM_INST_H */ diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h new file mode 100644 index 000000000000..501a40b9f18d --- /dev/null +++ b/arch/mips/include/asm/io.h @@ -0,0 +1,589 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995 Waldorf GmbH + * Copyright (C) 1994 - 2000, 06 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. + * Author: Maciej W. Rozycki + */ +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* + * Slowdown I/O port space accesses for antique hardware. + */ +#undef CONF_SLOWDOWN_IO + +/* + * Raw operations are never swapped in software. OTOH values that raw + * operations are working on may or may not have been swapped by the bus + * hardware. An example use would be for flash memory that's used for + * execute in place. + */ +# define __raw_ioswabb(a, x) (x) +# define __raw_ioswabw(a, x) (x) +# define __raw_ioswabl(a, x) (x) +# define __raw_ioswabq(a, x) (x) +# define ____raw_ioswabq(a, x) (x) + +/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */ + +#define IO_SPACE_LIMIT 0xffff + +/* + * On MIPS I/O ports are memory mapped, so we access them using normal + * load/store instructions. mips_io_port_base is the virtual address to + * which all ports are being mapped. For sake of efficiency some code + * assumes that this is an address that can be loaded with a single lui + * instruction, so the lower 16 bits must be zero. Should be true on + * on any sane architecture; generic code does not use this assumption. + */ +extern const unsigned long mips_io_port_base; + +/* + * Gcc will generate code to load the value of mips_io_port_base after each + * function call which may be fairly wasteful in some cases. So we don't + * play quite by the book. We tell gcc mips_io_port_base is a long variable + * which solves the code generation issue. Now we need to violate the + * aliasing rules a little to make initialization possible and finally we + * will need the barrier() to fight side effects of the aliasing chat. + * This trickery will eventually collapse under gcc's optimizer. Oh well. + */ +static inline void set_io_port_base(unsigned long base) +{ + * (unsigned long *) &mips_io_port_base = base; + barrier(); +} + +/* + * Thanks to James van Artsdalen for a better timing-fix than + * the two short jumps: using outb's to a nonexistent port seems + * to guarantee better timings even on fast machines. + * + * On the other hand, I'd like to be sure of a non-existent port: + * I feel a bit unsafe about using 0x80 (should be safe, though) + * + * Linus + * + */ + +#define __SLOW_DOWN_IO \ + __asm__ __volatile__( \ + "sb\t$0,0x80(%0)" \ + : : "r" (mips_io_port_base)); + +#ifdef CONF_SLOWDOWN_IO +#ifdef REALLY_SLOW_IO +#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; } +#else +#define SLOW_DOWN_IO __SLOW_DOWN_IO +#endif +#else +#define SLOW_DOWN_IO +#endif + +/* + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline unsigned long virt_to_phys(volatile const void *address) +{ + return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET; +} + +/* + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline void * phys_to_virt(unsigned long address) +{ + return (void *)(address + PAGE_OFFSET - PHYS_OFFSET); +} + +/* + * ISA I/O bus memory addresses are 1:1 with the physical address. + */ +static inline unsigned long isa_virt_to_bus(volatile void * address) +{ + return (unsigned long)address - PAGE_OFFSET; +} + +static inline void * isa_bus_to_virt(unsigned long address) +{ + return (void *)(address + PAGE_OFFSET); +} + +#define isa_page_to_bus page_to_phys + +/* + * However PCI ones are not necessarily 1:1 and therefore these interfaces + * are forbidden in portable PCI drivers. + * + * Allow them for x86 for legacy drivers, though. + */ +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +/* + * Change "struct page" to physical address. + */ +#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) + +extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags); +extern void __iounmap(const volatile void __iomem *addr); + +static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, + unsigned long flags) +{ + void __iomem *addr = plat_ioremap(offset, size, flags); + + if (addr) + return addr; + +#define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL)) + + if (cpu_has_64bit_addresses) { + u64 base = UNCAC_BASE; + + /* + * R10000 supports a 2 bit uncached attribute therefore + * UNCAC_BASE may not equal IO_BASE. + */ + if (flags == _CACHE_UNCACHED) + base = (u64) IO_BASE; + return (void __iomem *) (unsigned long) (base + offset); + } else if (__builtin_constant_p(offset) && + __builtin_constant_p(size) && __builtin_constant_p(flags)) { + phys_t phys_addr, last_addr; + + phys_addr = fixup_bigphys_addr(offset, size); + + /* Don't allow wraparound or zero size. */ + last_addr = phys_addr + size - 1; + if (!size || last_addr < phys_addr) + return NULL; + + /* + * Map uncached objects in the low 512MB of address + * space using KSEG1. + */ + if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) && + flags == _CACHE_UNCACHED) + return (void __iomem *) + (unsigned long)CKSEG1ADDR(phys_addr); + } + + return __ioremap(offset, size, flags); + +#undef __IS_LOW512 +} + +/* + * ioremap - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + */ +#define ioremap(offset, size) \ + __ioremap_mode((offset), (size), _CACHE_UNCACHED) + +/* + * ioremap_nocache - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap_nocache performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * This version of ioremap ensures that the memory is marked uncachable + * on the CPU as well as honouring existing caching rules from things like + * the PCI bus. Note that there are other caches and buffers on many + * busses. In paticular driver authors should read up on PCI writes + * + * It's useful if some control registers are in such an area and + * write combining or read caching is not desirable: + */ +#define ioremap_nocache(offset, size) \ + __ioremap_mode((offset), (size), _CACHE_UNCACHED) + +/* + * ioremap_cachable - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap_nocache performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * This version of ioremap ensures that the memory is marked cachable by + * the CPU. Also enables full write-combining. Useful for some + * memory-like regions on I/O busses. + */ +#define ioremap_cachable(offset, size) \ + __ioremap_mode((offset), (size), _page_cachable_default) + +/* + * These two are MIPS specific ioremap variant. ioremap_cacheable_cow + * requests a cachable mapping, ioremap_uncached_accelerated requests a + * mapping using the uncached accelerated mode which isn't supported on + * all processors. + */ +#define ioremap_cacheable_cow(offset, size) \ + __ioremap_mode((offset), (size), _CACHE_CACHABLE_COW) +#define ioremap_uncached_accelerated(offset, size) \ + __ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED) + +static inline void iounmap(const volatile void __iomem *addr) +{ + if (plat_iounmap(addr)) + return; + +#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1) + + if (cpu_has_64bit_addresses || + (__builtin_constant_p(addr) && __IS_KSEG1(addr))) + return; + + __iounmap(addr); + +#undef __IS_KSEG1 +} + +#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq) \ + \ +static inline void pfx##write##bwlq(type val, \ + volatile void __iomem *mem) \ +{ \ + volatile type *__mem; \ + type __val; \ + \ + __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ + \ + __val = pfx##ioswab##bwlq(__mem, val); \ + \ + if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ + *__mem = __val; \ + else if (cpu_has_64bits) { \ + unsigned long __flags; \ + type __tmp; \ + \ + if (irq) \ + local_irq_save(__flags); \ + __asm__ __volatile__( \ + ".set mips3" "\t\t# __writeq""\n\t" \ + "dsll32 %L0, %L0, 0" "\n\t" \ + "dsrl32 %L0, %L0, 0" "\n\t" \ + "dsll32 %M0, %M0, 0" "\n\t" \ + "or %L0, %L0, %M0" "\n\t" \ + "sd %L0, %2" "\n\t" \ + ".set mips0" "\n" \ + : "=r" (__tmp) \ + : "0" (__val), "m" (*__mem)); \ + if (irq) \ + local_irq_restore(__flags); \ + } else \ + BUG(); \ +} \ + \ +static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ +{ \ + volatile type *__mem; \ + type __val; \ + \ + __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ + \ + if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ + __val = *__mem; \ + else if (cpu_has_64bits) { \ + unsigned long __flags; \ + \ + if (irq) \ + local_irq_save(__flags); \ + __asm__ __volatile__( \ + ".set mips3" "\t\t# __readq" "\n\t" \ + "ld %L0, %1" "\n\t" \ + "dsra32 %M0, %L0, 0" "\n\t" \ + "sll %L0, %L0, 0" "\n\t" \ + ".set mips0" "\n" \ + : "=r" (__val) \ + : "m" (*__mem)); \ + if (irq) \ + local_irq_restore(__flags); \ + } else { \ + __val = 0; \ + BUG(); \ + } \ + \ + return pfx##ioswab##bwlq(__mem, __val); \ +} + +#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \ + \ +static inline void pfx##out##bwlq##p(type val, unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ + \ + __val = pfx##ioswab##bwlq(__addr, val); \ + \ + /* Really, we want this to be atomic */ \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + *__addr = __val; \ + slow; \ +} \ + \ +static inline type pfx##in##bwlq##p(unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ + \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + __val = *__addr; \ + slow; \ + \ + return pfx##ioswab##bwlq(__addr, __val); \ +} + +#define __BUILD_MEMORY_PFX(bus, bwlq, type) \ + \ +__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1) + +#define BUILDIO_MEM(bwlq, type) \ + \ +__BUILD_MEMORY_PFX(__raw_, bwlq, type) \ +__BUILD_MEMORY_PFX(, bwlq, type) \ +__BUILD_MEMORY_PFX(__mem_, bwlq, type) \ + +BUILDIO_MEM(b, u8) +BUILDIO_MEM(w, u16) +BUILDIO_MEM(l, u32) +BUILDIO_MEM(q, u64) + +#define __BUILD_IOPORT_PFX(bus, bwlq, type) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO) + +#define BUILDIO_IOPORT(bwlq, type) \ + __BUILD_IOPORT_PFX(, bwlq, type) \ + __BUILD_IOPORT_PFX(__mem_, bwlq, type) + +BUILDIO_IOPORT(b, u8) +BUILDIO_IOPORT(w, u16) +BUILDIO_IOPORT(l, u32) +#ifdef CONFIG_64BIT +BUILDIO_IOPORT(q, u64) +#endif + +#define __BUILDIO(bwlq, type) \ + \ +__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0) + +__BUILDIO(q, u64) + +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl +#define readq_relaxed readq + +/* + * Some code tests for these symbols + */ +#define readq readq +#define writeq writeq + +#define __BUILD_MEMORY_STRING(bwlq, type) \ + \ +static inline void writes##bwlq(volatile void __iomem *mem, \ + const void *addr, unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + __mem_write##bwlq(*__addr, mem); \ + __addr++; \ + } \ +} \ + \ +static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = __mem_read##bwlq(mem); \ + __addr++; \ + } \ +} + +#define __BUILD_IOPORT_STRING(bwlq, type) \ + \ +static inline void outs##bwlq(unsigned long port, const void *addr, \ + unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + __mem_out##bwlq(*__addr, port); \ + __addr++; \ + } \ +} \ + \ +static inline void ins##bwlq(unsigned long port, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = __mem_in##bwlq(port); \ + __addr++; \ + } \ +} + +#define BUILDSTRING(bwlq, type) \ + \ +__BUILD_MEMORY_STRING(bwlq, type) \ +__BUILD_IOPORT_STRING(bwlq, type) + +BUILDSTRING(b, u8) +BUILDSTRING(w, u16) +BUILDSTRING(l, u32) +#ifdef CONFIG_64BIT +BUILDSTRING(q, u64) +#endif + + +/* Depends on MIPS II instruction set */ +#define mmiowb() asm volatile ("sync" ::: "memory") + +static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + memset((void __force *) addr, val, count); +} +static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) +{ + memcpy(dst, (void __force *) src, count); +} +static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + memcpy((void __force *) dst, src, count); +} + +/* + * The caches on some architectures aren't dma-coherent and have need to + * handle this in software. There are three types of operations that + * can be applied to dma buffers. + * + * - dma_cache_wback_inv(start, size) makes caches and coherent by + * writing the content of the caches back to memory, if necessary. + * The function also invalidates the affected part of the caches as + * necessary before DMA transfers from outside to memory. + * - dma_cache_wback(start, size) makes caches and coherent by + * writing the content of the caches back to memory, if necessary. + * The function also invalidates the affected part of the caches as + * necessary before DMA transfers from outside to memory. + * - dma_cache_inv(start, size) invalidates the affected parts of the + * caches. Dirty lines of the caches may be written back or simply + * be discarded. This operation is necessary before dma operations + * to the memory. + * + * This API used to be exported; it now is for arch code internal use only. + */ +#ifdef CONFIG_DMA_NONCOHERENT + +extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size); +extern void (*_dma_cache_wback)(unsigned long start, unsigned long size); +extern void (*_dma_cache_inv)(unsigned long start, unsigned long size); + +#define dma_cache_wback_inv(start, size) _dma_cache_wback_inv(start, size) +#define dma_cache_wback(start, size) _dma_cache_wback(start, size) +#define dma_cache_inv(start, size) _dma_cache_inv(start, size) + +#else /* Sane hardware */ + +#define dma_cache_wback_inv(start,size) \ + do { (void) (start); (void) (size); } while (0) +#define dma_cache_wback(start,size) \ + do { (void) (start); (void) (size); } while (0) +#define dma_cache_inv(start,size) \ + do { (void) (start); (void) (size); } while (0) + +#endif /* CONFIG_DMA_NONCOHERENT */ + +/* + * Read a 32-bit register that requires a 64-bit read cycle on the bus. + * Avoid interrupt mucking, just adjust the address for 4-byte access. + * Assume the addresses are 8-byte aligned. + */ +#ifdef __MIPSEB__ +#define __CSR_32_ADJUST 4 +#else +#define __CSR_32_ADJUST 0 +#endif + +#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v)) +#define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST)) + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* _ASM_IO_H */ diff --git a/arch/mips/include/asm/ioctl.h b/arch/mips/include/asm/ioctl.h new file mode 100644 index 000000000000..85067e248a83 --- /dev/null +++ b/arch/mips/include/asm/ioctl.h @@ -0,0 +1,94 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 99, 2001 Ralf Baechle + */ +#ifndef _ASM_IOCTL_H +#define _ASM_IOCTL_H + +/* + * The original linux ioctl numbering scheme was just a general + * "anything goes" setup, where more or less random numbers were + * assigned. Sorry, I was clueless when I started out on this. + * + * On the alpha, we'll try to clean it up a bit, using a more sane + * ioctl numbering, and also trying to be compatible with OSF/1 in + * the process. I'd like to clean it up for the i386 as well, but + * it's so painful recognizing both the new and the old numbers.. + * + * The same applies for for the MIPS ABI; in fact even the macros + * from Linux/Alpha fit almost perfectly. + */ + +#define _IOC_NRBITS 8 +#define _IOC_TYPEBITS 8 +#define _IOC_SIZEBITS 13 +#define _IOC_DIRBITS 3 + +#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) +#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) +#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) +#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) + +#define _IOC_NRSHIFT 0 +#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS) +#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS) +#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS) + +/* + * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit. + * And this turns out useful to catch old ioctl numbers in header + * files for us. + */ +#define _IOC_NONE 1U +#define _IOC_READ 2U +#define _IOC_WRITE 4U + +/* + * The following are included for compatibility + */ +#define _IOC_VOID 0x20000000 +#define _IOC_OUT 0x40000000 +#define _IOC_IN 0x80000000 +#define _IOC_INOUT (IOC_IN|IOC_OUT) + +#define _IOC(dir, type, nr, size) \ + (((dir) << _IOC_DIRSHIFT) | \ + ((type) << _IOC_TYPESHIFT) | \ + ((nr) << _IOC_NRSHIFT) | \ + ((size) << _IOC_SIZESHIFT)) + +/* provoke compile error for invalid uses of size argument */ +extern unsigned int __invalid_size_argument_for_IOC; +#define _IOC_TYPECHECK(t) \ + ((sizeof(t) == sizeof(t[1]) && \ + sizeof(t) < (1 << _IOC_SIZEBITS)) ? \ + sizeof(t) : __invalid_size_argument_for_IOC) + +/* used to create numbers */ +#define _IO(type, nr) _IOC(_IOC_NONE, (type), (nr), 0) +#define _IOR(type, nr, size) _IOC(_IOC_READ, (type), (nr), (_IOC_TYPECHECK(size))) +#define _IOW(type, nr, size) _IOC(_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size))) +#define _IOWR(type, nr, size) _IOC(_IOC_READ|_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size))) +#define _IOR_BAD(type, nr, size) _IOC(_IOC_READ, (type), (nr), sizeof(size)) +#define _IOW_BAD(type, nr, size) _IOC(_IOC_WRITE, (type), (nr), sizeof(size)) +#define _IOWR_BAD(type, nr, size) _IOC(_IOC_READ|_IOC_WRITE, (type), (nr), sizeof(size)) + + +/* used to decode them.. */ +#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) +#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) +#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) +#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK) + +/* ...and for the drivers/sound files... */ + +#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) +#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) +#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) +#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT) +#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) + +#endif /* _ASM_IOCTL_H */ diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h new file mode 100644 index 000000000000..3f04a995ec54 --- /dev/null +++ b/arch/mips/include/asm/ioctls.h @@ -0,0 +1,109 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1996, 2001 Ralf Baechle + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#ifndef __ASM_IOCTLS_H +#define __ASM_IOCTLS_H + +#include + +#define TCGETA 0x5401 +#define TCSETA 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */ +#define TCSETAW 0x5403 +#define TCSETAF 0x5404 + +#define TCSBRK 0x5405 +#define TCXONC 0x5406 +#define TCFLSH 0x5407 + +#define TCGETS 0x540d +#define TCSETS 0x540e +#define TCSETSW 0x540f +#define TCSETSF 0x5410 + +#define TIOCEXCL 0x740d /* set exclusive use of tty */ +#define TIOCNXCL 0x740e /* reset exclusive use of tty */ +#define TIOCOUTQ 0x7472 /* output queue size */ +#define TIOCSTI 0x5472 /* simulate terminal input */ +#define TIOCMGET 0x741d /* get all modem bits */ +#define TIOCMBIS 0x741b /* bis modem bits */ +#define TIOCMBIC 0x741c /* bic modem bits */ +#define TIOCMSET 0x741a /* set all modem bits */ +#define TIOCPKT 0x5470 /* pty: set/clear packet mode */ +#define TIOCPKT_DATA 0x00 /* data packet */ +#define TIOCPKT_FLUSHREAD 0x01 /* flush packet */ +#define TIOCPKT_FLUSHWRITE 0x02 /* flush packet */ +#define TIOCPKT_STOP 0x04 /* stop output */ +#define TIOCPKT_START 0x08 /* start output */ +#define TIOCPKT_NOSTOP 0x10 /* no more ^S, ^Q */ +#define TIOCPKT_DOSTOP 0x20 /* now do ^S ^Q */ +/* #define TIOCPKT_IOCTL 0x40 state change of pty driver */ +#define TIOCSWINSZ _IOW('t', 103, struct winsize) /* set window size */ +#define TIOCGWINSZ _IOR('t', 104, struct winsize) /* get window size */ +#define TIOCNOTTY 0x5471 /* void tty association */ +#define TIOCSETD 0x7401 +#define TIOCGETD 0x7400 + +#define FIOCLEX 0x6601 +#define FIONCLEX 0x6602 +#define FIOASYNC 0x667d +#define FIONBIO 0x667e +#define FIOQSIZE 0x667f + +#define TIOCGLTC 0x7474 /* get special local chars */ +#define TIOCSLTC 0x7475 /* set special local chars */ +#define TIOCSPGRP _IOW('t', 118, int) /* set pgrp of tty */ +#define TIOCGPGRP _IOR('t', 119, int) /* get pgrp of tty */ +#define TIOCCONS _IOW('t', 120, int) /* become virtual console */ + +#define FIONREAD 0x467f +#define TIOCINQ FIONREAD + +#define TIOCGETP 0x7408 +#define TIOCSETP 0x7409 +#define TIOCSETN 0x740a /* TIOCSETP wo flush */ + +/* #define TIOCSETA _IOW('t', 20, struct termios) set termios struct */ +/* #define TIOCSETAW _IOW('t', 21, struct termios) drain output, set */ +/* #define TIOCSETAF _IOW('t', 22, struct termios) drn out, fls in, set */ +/* #define TIOCGETD _IOR('t', 26, int) get line discipline */ +/* #define TIOCSETD _IOW('t', 27, int) set line discipline */ + /* 127-124 compat */ + +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x7416 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T', 0x2A, struct termios2) +#define TCSETS2 _IOW('T', 0x2B, struct termios2) +#define TCSETSW2 _IOW('T', 0x2C, struct termios2) +#define TCSETSF2 _IOW('T', 0x2D, struct termios2) +#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ + +/* I hope the range from 0x5480 on is free ... */ +#define TIOCSCTTY 0x5480 /* become controlling tty */ +#define TIOCGSOFTCAR 0x5481 +#define TIOCSSOFTCAR 0x5482 +#define TIOCLINUX 0x5483 +#define TIOCGSERIAL 0x5484 +#define TIOCSSERIAL 0x5485 +#define TCSBRKP 0x5486 /* Needed for POSIX tcsendbreak() */ +#define TIOCSERCONFIG 0x5488 +#define TIOCSERGWILD 0x5489 +#define TIOCSERSWILD 0x548a +#define TIOCGLCKTRMIOS 0x548b +#define TIOCSLCKTRMIOS 0x548c +#define TIOCSERGSTRUCT 0x548d /* For debugging only */ +#define TIOCSERGETLSR 0x548e /* Get line status register */ +#define TIOCSERGETMULTI 0x548f /* Get multiport config */ +#define TIOCSERSETMULTI 0x5490 /* Set multiport config */ +#define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */ +#define TIOCGHAYESESP 0x5493 /* Get Hayes ESP configuration */ +#define TIOCSHAYESESP 0x5494 /* Set Hayes ESP configuration */ + +#endif /* __ASM_IOCTLS_H */ diff --git a/arch/mips/include/asm/ip32/crime.h b/arch/mips/include/asm/ip32/crime.h new file mode 100644 index 000000000000..7c36b0e5b1c6 --- /dev/null +++ b/arch/mips/include/asm/ip32/crime.h @@ -0,0 +1,158 @@ +/* + * Definitions for the SGI CRIME (CPU, Rendering, Interconnect and Memory + * Engine) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Harald Koerfgen + */ + +#ifndef __ASM_CRIME_H__ +#define __ASM_CRIME_H__ + +/* + * Address map + */ +#define CRIME_BASE 0x14000000 /* physical */ + +struct sgi_crime { + volatile unsigned long id; +#define CRIME_ID_MASK 0xff +#define CRIME_ID_IDBITS 0xf0 +#define CRIME_ID_IDVALUE 0xa0 +#define CRIME_ID_REV 0x0f +#define CRIME_REV_PETTY 0x00 +#define CRIME_REV_11 0x11 +#define CRIME_REV_13 0x13 +#define CRIME_REV_14 0x14 + + volatile unsigned long control; +#define CRIME_CONTROL_MASK 0x3fff +#define CRIME_CONTROL_TRITON_SYSADC 0x2000 +#define CRIME_CONTROL_CRIME_SYSADC 0x1000 +#define CRIME_CONTROL_HARD_RESET 0x0800 +#define CRIME_CONTROL_SOFT_RESET 0x0400 +#define CRIME_CONTROL_DOG_ENA 0x0200 +#define CRIME_CONTROL_ENDIANESS 0x0100 +#define CRIME_CONTROL_ENDIAN_BIG 0x0100 +#define CRIME_CONTROL_ENDIAN_LITTLE 0x0000 +#define CRIME_CONTROL_CQUEUE_HWM 0x000f +#define CRIME_CONTROL_CQUEUE_SHFT 0 +#define CRIME_CONTROL_WBUF_HWM 0x00f0 +#define CRIME_CONTROL_WBUF_SHFT 8 + + volatile unsigned long istat; + volatile unsigned long imask; + volatile unsigned long soft_int; + volatile unsigned long hard_int; +#define MACE_VID_IN1_INT BIT(0) +#define MACE_VID_IN2_INT BIT(1) +#define MACE_VID_OUT_INT BIT(2) +#define MACE_ETHERNET_INT BIT(3) +#define MACE_SUPERIO_INT BIT(4) +#define MACE_MISC_INT BIT(5) +#define MACE_AUDIO_INT BIT(6) +#define MACE_PCI_BRIDGE_INT BIT(7) +#define MACEPCI_SCSI0_INT BIT(8) +#define MACEPCI_SCSI1_INT BIT(9) +#define MACEPCI_SLOT0_INT BIT(10) +#define MACEPCI_SLOT1_INT BIT(11) +#define MACEPCI_SLOT2_INT BIT(12) +#define MACEPCI_SHARED0_INT BIT(13) +#define MACEPCI_SHARED1_INT BIT(14) +#define MACEPCI_SHARED2_INT BIT(15) +#define CRIME_GBE0_INT BIT(16) +#define CRIME_GBE1_INT BIT(17) +#define CRIME_GBE2_INT BIT(18) +#define CRIME_GBE3_INT BIT(19) +#define CRIME_CPUERR_INT BIT(20) +#define CRIME_MEMERR_INT BIT(21) +#define CRIME_RE_EMPTY_E_INT BIT(22) +#define CRIME_RE_FULL_E_INT BIT(23) +#define CRIME_RE_IDLE_E_INT BIT(24) +#define CRIME_RE_EMPTY_L_INT BIT(25) +#define CRIME_RE_FULL_L_INT BIT(26) +#define CRIME_RE_IDLE_L_INT BIT(27) +#define CRIME_SOFT0_INT BIT(28) +#define CRIME_SOFT1_INT BIT(29) +#define CRIME_SOFT2_INT BIT(30) +#define CRIME_SYSCORERR_INT CRIME_SOFT2_INT +#define CRIME_VICE_INT BIT(31) +/* Masks for deciding who handles the interrupt */ +#define CRIME_MACE_INT_MASK 0x8f +#define CRIME_MACEISA_INT_MASK 0x70 +#define CRIME_MACEPCI_INT_MASK 0xff00 +#define CRIME_CRIME_INT_MASK 0xffff0000 + + volatile unsigned long watchdog; +#define CRIME_DOG_POWER_ON_RESET 0x00010000 +#define CRIME_DOG_WARM_RESET 0x00080000 +#define CRIME_DOG_TIMEOUT (CRIME_DOG_POWER_ON_RESET|CRIME_DOG_WARM_RESET) +#define CRIME_DOG_VALUE 0x00007fff + + volatile unsigned long timer; +#define CRIME_MASTER_FREQ 66666500 /* Crime upcounter frequency */ +#define CRIME_NS_PER_TICK 15 /* for delay_calibrate */ + + volatile unsigned long cpu_error_addr; +#define CRIME_CPU_ERROR_ADDR_MASK 0x3ffffffff + + volatile unsigned long cpu_error_stat; +#define CRIME_CPU_ERROR_MASK 0x7 /* cpu error stat is 3 bits */ +#define CRIME_CPU_ERROR_CPU_ILL_ADDR 0x4 +#define CRIME_CPU_ERROR_VICE_WRT_PRTY 0x2 +#define CRIME_CPU_ERROR_CPU_WRT_PRTY 0x1 + + unsigned long _pad0[54]; + + volatile unsigned long mc_ctrl; + volatile unsigned long bank_ctrl[8]; +#define CRIME_MEM_BANK_CONTROL_MASK 0x11f /* 9 bits 7:5 reserved */ +#define CRIME_MEM_BANK_CONTROL_ADDR 0x01f +#define CRIME_MEM_BANK_CONTROL_SDRAM_SIZE 0x100 +#define CRIME_MAXBANKS 8 + + volatile unsigned long mem_ref_counter; +#define CRIME_MEM_REF_COUNTER_MASK 0x3ff /* 10bit */ + + volatile unsigned long mem_error_stat; +#define CRIME_MEM_ERROR_STAT_MASK 0x0ff7ffff /* 28-bit register */ +#define CRIME_MEM_ERROR_MACE_ID 0x0000007f +#define CRIME_MEM_ERROR_MACE_ACCESS 0x00000080 +#define CRIME_MEM_ERROR_RE_ID 0x00007f00 +#define CRIME_MEM_ERROR_RE_ACCESS 0x00008000 +#define CRIME_MEM_ERROR_GBE_ACCESS 0x00010000 +#define CRIME_MEM_ERROR_VICE_ACCESS 0x00020000 +#define CRIME_MEM_ERROR_CPU_ACCESS 0x00040000 +#define CRIME_MEM_ERROR_RESERVED 0x00080000 +#define CRIME_MEM_ERROR_SOFT_ERR 0x00100000 +#define CRIME_MEM_ERROR_HARD_ERR 0x00200000 +#define CRIME_MEM_ERROR_MULTIPLE 0x00400000 +#define CRIME_MEM_ERROR_ECC 0x01800000 +#define CRIME_MEM_ERROR_MEM_ECC_RD 0x00800000 +#define CRIME_MEM_ERROR_MEM_ECC_RMW 0x01000000 +#define CRIME_MEM_ERROR_INV 0x0e000000 +#define CRIME_MEM_ERROR_INV_MEM_ADDR_RD 0x02000000 +#define CRIME_MEM_ERROR_INV_MEM_ADDR_WR 0x04000000 +#define CRIME_MEM_ERROR_INV_MEM_ADDR_RMW 0x08000000 + + volatile unsigned long mem_error_addr; +#define CRIME_MEM_ERROR_ADDR_MASK 0x3fffffff + + volatile unsigned long mem_ecc_syn; +#define CRIME_MEM_ERROR_ECC_SYN_MASK 0xffffffff + + volatile unsigned long mem_ecc_chk; +#define CRIME_MEM_ERROR_ECC_CHK_MASK 0xffffffff + + volatile unsigned long mem_ecc_repl; +#define CRIME_MEM_ERROR_ECC_REPL_MASK 0xffffffff +}; + +extern struct sgi_crime __iomem *crime; + +#define CRIME_HI_MEM_BASE 0x40000000 /* this is where whole 1G of RAM is mapped */ + +#endif /* __ASM_CRIME_H__ */ diff --git a/arch/mips/include/asm/ip32/ip32_ints.h b/arch/mips/include/asm/ip32/ip32_ints.h new file mode 100644 index 000000000000..85bc5302bce0 --- /dev/null +++ b/arch/mips/include/asm/ip32/ip32_ints.h @@ -0,0 +1,114 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Harald Koerfgen + */ + +#ifndef __ASM_IP32_INTS_H +#define __ASM_IP32_INTS_H + +#include + +/* + * This list reflects the assignment of interrupt numbers to + * interrupting events. Order is fairly irrelevant to handling + * priority. This differs from irix. + */ + +enum ip32_irq_no { + /* + * CPU interrupts are 0 ... 7 + */ + + CRIME_IRQ_BASE = MIPS_CPU_IRQ_BASE + 8, + + /* + * MACE + */ + MACE_VID_IN1_IRQ = CRIME_IRQ_BASE, + MACE_VID_IN2_IRQ, + MACE_VID_OUT_IRQ, + MACE_ETHERNET_IRQ, + /* SUPERIO, MISC, and AUDIO are MACEISA */ + __MACE_SUPERIO, + __MACE_MISC, + __MACE_AUDIO, + MACE_PCI_BRIDGE_IRQ, + + /* + * MACEPCI + */ + MACEPCI_SCSI0_IRQ, + MACEPCI_SCSI1_IRQ, + MACEPCI_SLOT0_IRQ, + MACEPCI_SLOT1_IRQ, + MACEPCI_SLOT2_IRQ, + MACEPCI_SHARED0_IRQ, + MACEPCI_SHARED1_IRQ, + MACEPCI_SHARED2_IRQ, + + /* + * CRIME + */ + CRIME_GBE0_IRQ, + CRIME_GBE1_IRQ, + CRIME_GBE2_IRQ, + CRIME_GBE3_IRQ, + CRIME_CPUERR_IRQ, + CRIME_MEMERR_IRQ, + CRIME_RE_EMPTY_E_IRQ, + CRIME_RE_FULL_E_IRQ, + CRIME_RE_IDLE_E_IRQ, + CRIME_RE_EMPTY_L_IRQ, + CRIME_RE_FULL_L_IRQ, + CRIME_RE_IDLE_L_IRQ, + CRIME_SOFT0_IRQ, + CRIME_SOFT1_IRQ, + CRIME_SOFT2_IRQ, + CRIME_SYSCORERR_IRQ = CRIME_SOFT2_IRQ, + CRIME_VICE_IRQ, + + /* + * MACEISA + */ + MACEISA_AUDIO_SW_IRQ, + MACEISA_AUDIO_SC_IRQ, + MACEISA_AUDIO1_DMAT_IRQ, + MACEISA_AUDIO1_OF_IRQ, + MACEISA_AUDIO2_DMAT_IRQ, + MACEISA_AUDIO2_MERR_IRQ, + MACEISA_AUDIO3_DMAT_IRQ, + MACEISA_AUDIO3_MERR_IRQ, + MACEISA_RTC_IRQ, + MACEISA_KEYB_IRQ, + /* MACEISA_KEYB_POLL is not an IRQ */ + __MACEISA_KEYB_POLL, + MACEISA_MOUSE_IRQ, + /* MACEISA_MOUSE_POLL is not an IRQ */ + __MACEISA_MOUSE_POLL, + MACEISA_TIMER0_IRQ, + MACEISA_TIMER1_IRQ, + MACEISA_TIMER2_IRQ, + MACEISA_PARALLEL_IRQ, + MACEISA_PAR_CTXA_IRQ, + MACEISA_PAR_CTXB_IRQ, + MACEISA_PAR_MERR_IRQ, + MACEISA_SERIAL1_IRQ, + MACEISA_SERIAL1_TDMAT_IRQ, + MACEISA_SERIAL1_TDMAPR_IRQ, + MACEISA_SERIAL1_TDMAME_IRQ, + MACEISA_SERIAL1_RDMAT_IRQ, + MACEISA_SERIAL1_RDMAOR_IRQ, + MACEISA_SERIAL2_IRQ, + MACEISA_SERIAL2_TDMAT_IRQ, + MACEISA_SERIAL2_TDMAPR_IRQ, + MACEISA_SERIAL2_TDMAME_IRQ, + MACEISA_SERIAL2_RDMAT_IRQ, + MACEISA_SERIAL2_RDMAOR_IRQ, + + IP32_IRQ_MAX = MACEISA_SERIAL2_RDMAOR_IRQ +}; + +#endif /* __ASM_IP32_INTS_H */ diff --git a/arch/mips/include/asm/ip32/mace.h b/arch/mips/include/asm/ip32/mace.h new file mode 100644 index 000000000000..d08d7c672139 --- /dev/null +++ b/arch/mips/include/asm/ip32/mace.h @@ -0,0 +1,365 @@ +/* + * Definitions for the SGI MACE (Multimedia, Audio and Communications Engine) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Harald Koerfgen + * Copyright (C) 2004 Ladislav Michl + */ + +#ifndef __ASM_MACE_H__ +#define __ASM_MACE_H__ + +/* + * Address map + */ +#define MACE_BASE 0x1f000000 /* physical */ + +/* + * PCI interface + */ +struct mace_pci { + volatile unsigned int error_addr; + volatile unsigned int error; +#define MACEPCI_ERROR_MASTER_ABORT BIT(31) +#define MACEPCI_ERROR_TARGET_ABORT BIT(30) +#define MACEPCI_ERROR_DATA_PARITY_ERR BIT(29) +#define MACEPCI_ERROR_RETRY_ERR BIT(28) +#define MACEPCI_ERROR_ILLEGAL_CMD BIT(27) +#define MACEPCI_ERROR_SYSTEM_ERR BIT(26) +#define MACEPCI_ERROR_INTERRUPT_TEST BIT(25) +#define MACEPCI_ERROR_PARITY_ERR BIT(24) +#define MACEPCI_ERROR_OVERRUN BIT(23) +#define MACEPCI_ERROR_RSVD BIT(22) +#define MACEPCI_ERROR_MEMORY_ADDR BIT(21) +#define MACEPCI_ERROR_CONFIG_ADDR BIT(20) +#define MACEPCI_ERROR_MASTER_ABORT_ADDR_VALID BIT(19) +#define MACEPCI_ERROR_TARGET_ABORT_ADDR_VALID BIT(18) +#define MACEPCI_ERROR_DATA_PARITY_ADDR_VALID BIT(17) +#define MACEPCI_ERROR_RETRY_ADDR_VALID BIT(16) +#define MACEPCI_ERROR_SIG_TABORT BIT(4) +#define MACEPCI_ERROR_DEVSEL_MASK 0xc0 +#define MACEPCI_ERROR_DEVSEL_FAST 0 +#define MACEPCI_ERROR_DEVSEL_MED 0x40 +#define MACEPCI_ERROR_DEVSEL_SLOW 0x80 +#define MACEPCI_ERROR_FBB BIT(1) +#define MACEPCI_ERROR_66MHZ BIT(0) + volatile unsigned int control; +#define MACEPCI_CONTROL_INT(x) BIT(x) +#define MACEPCI_CONTROL_INT_MASK 0xff +#define MACEPCI_CONTROL_SERR_ENA BIT(8) +#define MACEPCI_CONTROL_ARB_N6 BIT(9) +#define MACEPCI_CONTROL_PARITY_ERR BIT(10) +#define MACEPCI_CONTROL_MRMRA_ENA BIT(11) +#define MACEPCI_CONTROL_ARB_N3 BIT(12) +#define MACEPCI_CONTROL_ARB_N4 BIT(13) +#define MACEPCI_CONTROL_ARB_N5 BIT(14) +#define MACEPCI_CONTROL_PARK_LIU BIT(15) +#define MACEPCI_CONTROL_INV_INT(x) BIT(16+x) +#define MACEPCI_CONTROL_INV_INT_MASK 0x00ff0000 +#define MACEPCI_CONTROL_OVERRUN_INT BIT(24) +#define MACEPCI_CONTROL_PARITY_INT BIT(25) +#define MACEPCI_CONTROL_SERR_INT BIT(26) +#define MACEPCI_CONTROL_IT_INT BIT(27) +#define MACEPCI_CONTROL_RE_INT BIT(28) +#define MACEPCI_CONTROL_DPED_INT BIT(29) +#define MACEPCI_CONTROL_TAR_INT BIT(30) +#define MACEPCI_CONTROL_MAR_INT BIT(31) + volatile unsigned int rev; + unsigned int _pad[0xcf8/4 - 4]; + volatile unsigned int config_addr; + union { + volatile unsigned char b[4]; + volatile unsigned short w[2]; + volatile unsigned int l; + } config_data; +}; +#define MACEPCI_LOW_MEMORY 0x1a000000 +#define MACEPCI_LOW_IO 0x18000000 +#define MACEPCI_SWAPPED_VIEW 0 +#define MACEPCI_NATIVE_VIEW 0x40000000 +#define MACEPCI_IO 0x80000000 +#define MACEPCI_HI_MEMORY 0x280000000 +#define MACEPCI_HI_IO 0x100000000 + +/* + * Video interface + */ +struct mace_video { + unsigned long xxx; /* later... */ +}; + +/* + * Ethernet interface + */ +struct mace_ethernet { + volatile unsigned long mac_ctrl; + volatile unsigned long int_stat; + volatile unsigned long dma_ctrl; + volatile unsigned long timer; + volatile unsigned long tx_int_al; + volatile unsigned long rx_int_al; + volatile unsigned long tx_info; + volatile unsigned long tx_info_al; + volatile unsigned long rx_buff; + volatile unsigned long rx_buff_al1; + volatile unsigned long rx_buff_al2; + volatile unsigned long diag; + volatile unsigned long phy_data; + volatile unsigned long phy_regs; + volatile unsigned long phy_trans_go; + volatile unsigned long backoff_seed; + /*===================================*/ + volatile unsigned long imq_reserved[4]; + volatile unsigned long mac_addr; + volatile unsigned long mac_addr2; + volatile unsigned long mcast_filter; + volatile unsigned long tx_ring_base; + /* Following are read-only registers for debugging */ + volatile unsigned long tx_pkt1_hdr; + volatile unsigned long tx_pkt1_ptr[3]; + volatile unsigned long tx_pkt2_hdr; + volatile unsigned long tx_pkt2_ptr[3]; + /*===================================*/ + volatile unsigned long rx_fifo; +}; + +/* + * Peripherals + */ + +/* Audio registers */ +struct mace_audio { + volatile unsigned long control; + volatile unsigned long codec_control; /* codec status control */ + volatile unsigned long codec_mask; /* codec status input mask */ + volatile unsigned long codec_read; /* codec status read data */ + struct { + volatile unsigned long control; /* channel control */ + volatile unsigned long read_ptr; /* channel read pointer */ + volatile unsigned long write_ptr; /* channel write pointer */ + volatile unsigned long depth; /* channel depth */ + } chan[3]; +}; + + +/* register definitions for parallel port DMA */ +struct mace_parport { + /* 0 - do nothing, + * 1 - pulse terminal count to the device after buffer is drained */ +#define MACEPAR_CONTEXT_LASTFLAG BIT(63) + /* Should not cross 4K page boundary */ +#define MACEPAR_CONTEXT_DATA_BOUND 0x0000000000001000UL +#define MACEPAR_CONTEXT_DATALEN_MASK 0x00000fff00000000UL +#define MACEPAR_CONTEXT_DATALEN_SHIFT 32 + /* Can be arbitrarily aligned on any byte boundary on output, + * 64 byte aligned on input */ +#define MACEPAR_CONTEXT_BASEADDR_MASK 0x00000000ffffffffUL + volatile u64 context_a; + volatile u64 context_b; + /* 0 - mem->device, 1 - device->mem */ +#define MACEPAR_CTLSTAT_DIRECTION BIT(0) + /* 0 - channel frozen, 1 - channel enabled */ +#define MACEPAR_CTLSTAT_ENABLE BIT(1) + /* 0 - channel active, 1 - complete channel reset */ +#define MACEPAR_CTLSTAT_RESET BIT(2) +#define MACEPAR_CTLSTAT_CTXB_VALID BIT(3) +#define MACEPAR_CTLSTAT_CTXA_VALID BIT(4) + volatile u64 cntlstat; /* Control/Status register */ +#define MACEPAR_DIAG_CTXINUSE BIT(0) + /* 1 - Dma engine is enabled and processing something */ +#define MACEPAR_DIAG_DMACTIVE BIT(1) + /* Counter of bytes left */ +#define MACEPAR_DIAG_CTRMASK 0x0000000000003ffcUL +#define MACEPAR_DIAG_CTRSHIFT 2 + volatile u64 diagnostic; /* RO: diagnostic register */ +}; + +/* ISA Control and DMA registers */ +struct mace_isactrl { + volatile unsigned long ringbase; +#define MACEISA_RINGBUFFERS_SIZE (8 * 4096) + + volatile unsigned long misc; +#define MACEISA_FLASH_WE BIT(0) /* 1=> Enable FLASH writes */ +#define MACEISA_PWD_CLEAR BIT(1) /* 1=> PWD CLEAR jumper detected */ +#define MACEISA_NIC_DEASSERT BIT(2) +#define MACEISA_NIC_DATA BIT(3) +#define MACEISA_LED_RED BIT(4) /* 0=> Illuminate red LED */ +#define MACEISA_LED_GREEN BIT(5) /* 0=> Illuminate green LED */ +#define MACEISA_DP_RAM_ENABLE BIT(6) + + volatile unsigned long istat; + volatile unsigned long imask; +#define MACEISA_AUDIO_SW_INT BIT(0) +#define MACEISA_AUDIO_SC_INT BIT(1) +#define MACEISA_AUDIO1_DMAT_INT BIT(2) +#define MACEISA_AUDIO1_OF_INT BIT(3) +#define MACEISA_AUDIO2_DMAT_INT BIT(4) +#define MACEISA_AUDIO2_MERR_INT BIT(5) +#define MACEISA_AUDIO3_DMAT_INT BIT(6) +#define MACEISA_AUDIO3_MERR_INT BIT(7) +#define MACEISA_RTC_INT BIT(8) +#define MACEISA_KEYB_INT BIT(9) +#define MACEISA_KEYB_POLL_INT BIT(10) +#define MACEISA_MOUSE_INT BIT(11) +#define MACEISA_MOUSE_POLL_INT BIT(12) +#define MACEISA_TIMER0_INT BIT(13) +#define MACEISA_TIMER1_INT BIT(14) +#define MACEISA_TIMER2_INT BIT(15) +#define MACEISA_PARALLEL_INT BIT(16) +#define MACEISA_PAR_CTXA_INT BIT(17) +#define MACEISA_PAR_CTXB_INT BIT(18) +#define MACEISA_PAR_MERR_INT BIT(19) +#define MACEISA_SERIAL1_INT BIT(20) +#define MACEISA_SERIAL1_TDMAT_INT BIT(21) +#define MACEISA_SERIAL1_TDMAPR_INT BIT(22) +#define MACEISA_SERIAL1_TDMAME_INT BIT(23) +#define MACEISA_SERIAL1_RDMAT_INT BIT(24) +#define MACEISA_SERIAL1_RDMAOR_INT BIT(25) +#define MACEISA_SERIAL2_INT BIT(26) +#define MACEISA_SERIAL2_TDMAT_INT BIT(27) +#define MACEISA_SERIAL2_TDMAPR_INT BIT(28) +#define MACEISA_SERIAL2_TDMAME_INT BIT(29) +#define MACEISA_SERIAL2_RDMAT_INT BIT(30) +#define MACEISA_SERIAL2_RDMAOR_INT BIT(31) + + volatile unsigned long _pad[0x2000/8 - 4]; + + volatile unsigned long dp_ram[0x400]; + struct mace_parport parport; +}; + +/* Keyboard & Mouse registers + * -> drivers/input/serio/maceps2.c */ +struct mace_ps2port { + volatile unsigned long tx; + volatile unsigned long rx; + volatile unsigned long control; + volatile unsigned long status; +}; + +struct mace_ps2 { + struct mace_ps2port keyb; + struct mace_ps2port mouse; +}; + +/* I2C registers + * -> drivers/i2c/algos/i2c-algo-sgi.c */ +struct mace_i2c { + volatile unsigned long config; +#define MACEI2C_RESET BIT(0) +#define MACEI2C_FAST BIT(1) +#define MACEI2C_DATA_OVERRIDE BIT(2) +#define MACEI2C_CLOCK_OVERRIDE BIT(3) +#define MACEI2C_DATA_STATUS BIT(4) +#define MACEI2C_CLOCK_STATUS BIT(5) + volatile unsigned long control; + volatile unsigned long data; +}; + +/* Timer registers */ +typedef union { + volatile unsigned long ust_msc; + struct reg { + volatile unsigned int ust; + volatile unsigned int msc; + } reg; +} timer_reg; + +struct mace_timers { + volatile unsigned long ust; +#define MACE_UST_PERIOD_NS 960 + + volatile unsigned long compare1; + volatile unsigned long compare2; + volatile unsigned long compare3; + + timer_reg audio_in; + timer_reg audio_out1; + timer_reg audio_out2; + timer_reg video_in1; + timer_reg video_in2; + timer_reg video_out; +}; + +struct mace_perif { + struct mace_audio audio; + char _pad0[0x10000 - sizeof(struct mace_audio)]; + + struct mace_isactrl ctrl; + char _pad1[0x10000 - sizeof(struct mace_isactrl)]; + + struct mace_ps2 ps2; + char _pad2[0x10000 - sizeof(struct mace_ps2)]; + + struct mace_i2c i2c; + char _pad3[0x10000 - sizeof(struct mace_i2c)]; + + struct mace_timers timers; + char _pad4[0x10000 - sizeof(struct mace_timers)]; +}; + + +/* + * ISA peripherals + */ + +/* Parallel port */ +struct mace_parallel { +}; + +struct mace_ecp1284 { /* later... */ +}; + +/* Serial port */ +struct mace_serial { + volatile unsigned long xxx; /* later... */ +}; + +struct mace_isa { + struct mace_parallel parallel; + char _pad1[0x8000 - sizeof(struct mace_parallel)]; + + struct mace_ecp1284 ecp1284; + char _pad2[0x8000 - sizeof(struct mace_ecp1284)]; + + struct mace_serial serial1; + char _pad3[0x8000 - sizeof(struct mace_serial)]; + + struct mace_serial serial2; + char _pad4[0x8000 - sizeof(struct mace_serial)]; + + volatile unsigned char rtc[0x10000]; +}; + +struct sgi_mace { + char _reserved[0x80000]; + + struct mace_pci pci; + char _pad0[0x80000 - sizeof(struct mace_pci)]; + + struct mace_video video_in1; + char _pad1[0x80000 - sizeof(struct mace_video)]; + + struct mace_video video_in2; + char _pad2[0x80000 - sizeof(struct mace_video)]; + + struct mace_video video_out; + char _pad3[0x80000 - sizeof(struct mace_video)]; + + struct mace_ethernet eth; + char _pad4[0x80000 - sizeof(struct mace_ethernet)]; + + struct mace_perif perif; + char _pad5[0x80000 - sizeof(struct mace_perif)]; + + struct mace_isa isa; + char _pad6[0x80000 - sizeof(struct mace_isa)]; +}; + +extern struct sgi_mace __iomem *mace; + +#endif /* __ASM_MACE_H__ */ diff --git a/arch/mips/include/asm/ipcbuf.h b/arch/mips/include/asm/ipcbuf.h new file mode 100644 index 000000000000..d47d08f264e7 --- /dev/null +++ b/arch/mips/include/asm/ipcbuf.h @@ -0,0 +1,28 @@ +#ifndef _ASM_IPCBUF_H +#define _ASM_IPCBUF_H + +/* + * The ipc64_perm structure for alpha architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit seq + * - 2 miscellaneous 64-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid_t uid; + __kernel_gid_t gid; + __kernel_uid_t cuid; + __kernel_gid_t cgid; + __kernel_mode_t mode; + unsigned short seq; + unsigned short __pad1; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_IPCBUF_H */ diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h new file mode 100644 index 000000000000..a58f0eecc68f --- /dev/null +++ b/arch/mips/include/asm/irq.h @@ -0,0 +1,163 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle + */ +#ifndef _ASM_IRQ_H +#define _ASM_IRQ_H + +#include + +#include + +#include + +#ifdef CONFIG_I8259 +static inline int irq_canonicalize(int irq) +{ + return ((irq == I8259A_IRQ_BASE + 2) ? I8259A_IRQ_BASE + 9 : irq); +} +#else +#define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */ +#endif + +#ifdef CONFIG_MIPS_MT_SMTC + +struct irqaction; + +extern unsigned long irq_hwmask[]; +extern int setup_irq_smtc(unsigned int irq, struct irqaction * new, + unsigned long hwmask); + +static inline void smtc_im_ack_irq(unsigned int irq) +{ + if (irq_hwmask[irq] & ST0_IM) + set_c0_status(irq_hwmask[irq] & ST0_IM); +} + +#else + +static inline void smtc_im_ack_irq(unsigned int irq) +{ +} + +#endif /* CONFIG_MIPS_MT_SMTC */ + +#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF +#include + +extern void plat_set_irq_affinity(unsigned int irq, cpumask_t affinity); +extern void smtc_forward_irq(unsigned int irq); + +/* + * IRQ affinity hook invoked at the beginning of interrupt dispatch + * if option is enabled. + * + * Up through Linux 2.6.22 (at least) cpumask operations are very + * inefficient on MIPS. Initial prototypes of SMTC IRQ affinity + * used a "fast path" per-IRQ-descriptor cache of affinity information + * to reduce latency. As there is a project afoot to optimize the + * cpumask implementations, this version is optimistically assuming + * that cpumask.h macro overhead is reasonable during interrupt dispatch. + */ +#define IRQ_AFFINITY_HOOK(irq) \ +do { \ + if (!cpu_isset(smp_processor_id(), irq_desc[irq].affinity)) { \ + smtc_forward_irq(irq); \ + irq_exit(); \ + return; \ + } \ +} while (0) + +#else /* Not doing SMTC affinity */ + +#define IRQ_AFFINITY_HOOK(irq) do { } while (0) + +#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ + +#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP + +/* + * Clear interrupt mask handling "backstop" if irq_hwmask + * entry so indicates. This implies that the ack() or end() + * functions will take over re-enabling the low-level mask. + * Otherwise it will be done on return from exception. + */ +#define __DO_IRQ_SMTC_HOOK(irq) \ +do { \ + IRQ_AFFINITY_HOOK(irq); \ + if (irq_hwmask[irq] & 0x0000ff00) \ + write_c0_tccontext(read_c0_tccontext() & \ + ~(irq_hwmask[irq] & 0x0000ff00)); \ +} while (0) + +#define __NO_AFFINITY_IRQ_SMTC_HOOK(irq) \ +do { \ + if (irq_hwmask[irq] & 0x0000ff00) \ + write_c0_tccontext(read_c0_tccontext() & \ + ~(irq_hwmask[irq] & 0x0000ff00)); \ +} while (0) + +#else + +#define __DO_IRQ_SMTC_HOOK(irq) \ +do { \ + IRQ_AFFINITY_HOOK(irq); \ +} while (0) +#define __NO_AFFINITY_IRQ_SMTC_HOOK(irq) do { } while (0) + +#endif + +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + * + * Ideally there should be away to get this into kernel/irq/handle.c to + * avoid the overhead of a call for just a tiny function ... + */ +#define do_IRQ(irq) \ +do { \ + irq_enter(); \ + __DO_IRQ_SMTC_HOOK(irq); \ + generic_handle_irq(irq); \ + irq_exit(); \ +} while (0) + +#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF +/* + * To avoid inefficient and in some cases pathological re-checking of + * IRQ affinity, we have this variant that skips the affinity check. + */ + + +#define do_IRQ_no_affinity(irq) \ +do { \ + irq_enter(); \ + __NO_AFFINITY_IRQ_SMTC_HOOK(irq); \ + generic_handle_irq(irq); \ + irq_exit(); \ +} while (0) + +#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ + +extern void arch_init_irq(void); +extern void spurious_interrupt(void); + +extern int allocate_irqno(void); +extern void alloc_legacy_irqno(void); +extern void free_irqno(unsigned int irq); + +/* + * Before R2 the timer and performance counter interrupts were both fixed to + * IE7. Since R2 their number has to be read from the c0_intctl register. + */ +#define CP0_LEGACY_COMPARE_IRQ 7 + +extern int cp0_compare_irq; +extern int cp0_perfcount_irq; + +#endif /* _ASM_IRQ_H */ diff --git a/arch/mips/include/asm/irq_cpu.h b/arch/mips/include/asm/irq_cpu.h new file mode 100644 index 000000000000..ef6a07cddb23 --- /dev/null +++ b/arch/mips/include/asm/irq_cpu.h @@ -0,0 +1,20 @@ +/* + * include/asm-mips/irq_cpu.h + * + * MIPS CPU interrupt definitions. + * + * Copyright (C) 2002 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_IRQ_CPU_H +#define _ASM_IRQ_CPU_H + +extern void mips_cpu_irq_init(void); +extern void rm7k_cpu_irq_init(void); +extern void rm9k_cpu_irq_init(void); + +#endif /* _ASM_IRQ_CPU_H */ diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h new file mode 100644 index 000000000000..f9a7c3ac2e66 --- /dev/null +++ b/arch/mips/include/asm/irq_gt641xx.h @@ -0,0 +1,60 @@ +/* + * Galileo/Marvell GT641xx IRQ definitions. + * + * Copyright (C) 2007 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef _ASM_IRQ_GT641XX_H +#define _ASM_IRQ_GT641XX_H + +#ifndef GT641XX_IRQ_BASE +#define GT641XX_IRQ_BASE 8 +#endif + +#define GT641XX_MEMORY_OUT_OF_RANGE_IRQ (GT641XX_IRQ_BASE + 1) +#define GT641XX_DMA_OUT_OF_RANGE_IRQ (GT641XX_IRQ_BASE + 2) +#define GT641XX_CPU_ACCESS_OUT_OF_RANGE_IRQ (GT641XX_IRQ_BASE + 3) +#define GT641XX_DMA0_IRQ (GT641XX_IRQ_BASE + 4) +#define GT641XX_DMA1_IRQ (GT641XX_IRQ_BASE + 5) +#define GT641XX_DMA2_IRQ (GT641XX_IRQ_BASE + 6) +#define GT641XX_DMA3_IRQ (GT641XX_IRQ_BASE + 7) +#define GT641XX_TIMER0_IRQ (GT641XX_IRQ_BASE + 8) +#define GT641XX_TIMER1_IRQ (GT641XX_IRQ_BASE + 9) +#define GT641XX_TIMER2_IRQ (GT641XX_IRQ_BASE + 10) +#define GT641XX_TIMER3_IRQ (GT641XX_IRQ_BASE + 11) +#define GT641XX_PCI_0_MASTER_READ_ERROR_IRQ (GT641XX_IRQ_BASE + 12) +#define GT641XX_PCI_0_SLAVE_WRITE_ERROR_IRQ (GT641XX_IRQ_BASE + 13) +#define GT641XX_PCI_0_MASTER_WRITE_ERROR_IRQ (GT641XX_IRQ_BASE + 14) +#define GT641XX_PCI_0_SLAVE_READ_ERROR_IRQ (GT641XX_IRQ_BASE + 15) +#define GT641XX_PCI_0_ADDRESS_ERROR_IRQ (GT641XX_IRQ_BASE + 16) +#define GT641XX_MEMORY_ERROR_IRQ (GT641XX_IRQ_BASE + 17) +#define GT641XX_PCI_0_MASTER_ABORT_IRQ (GT641XX_IRQ_BASE + 18) +#define GT641XX_PCI_0_TARGET_ABORT_IRQ (GT641XX_IRQ_BASE + 19) +#define GT641XX_PCI_0_RETRY_TIMEOUT_IRQ (GT641XX_IRQ_BASE + 20) +#define GT641XX_CPU_INT0_IRQ (GT641XX_IRQ_BASE + 21) +#define GT641XX_CPU_INT1_IRQ (GT641XX_IRQ_BASE + 22) +#define GT641XX_CPU_INT2_IRQ (GT641XX_IRQ_BASE + 23) +#define GT641XX_CPU_INT3_IRQ (GT641XX_IRQ_BASE + 24) +#define GT641XX_CPU_INT4_IRQ (GT641XX_IRQ_BASE + 25) +#define GT641XX_PCI_INT0_IRQ (GT641XX_IRQ_BASE + 26) +#define GT641XX_PCI_INT1_IRQ (GT641XX_IRQ_BASE + 27) +#define GT641XX_PCI_INT2_IRQ (GT641XX_IRQ_BASE + 28) +#define GT641XX_PCI_INT3_IRQ (GT641XX_IRQ_BASE + 29) + +extern void gt641xx_irq_dispatch(void); +extern void gt641xx_irq_init(void); + +#endif /* _ASM_IRQ_GT641XX_H */ diff --git a/arch/mips/include/asm/irq_regs.h b/arch/mips/include/asm/irq_regs.h new file mode 100644 index 000000000000..33bd2a06de57 --- /dev/null +++ b/arch/mips/include/asm/irq_regs.h @@ -0,0 +1,21 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_IRQ_REGS_H +#define __ASM_IRQ_REGS_H + +#define ARCH_HAS_OWN_IRQ_REGS + +#include + +static inline struct pt_regs *get_irq_regs(void) +{ + return current_thread_info()->regs; +} + +#endif /* __ASM_IRQ_REGS_H */ diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h new file mode 100644 index 000000000000..701ec0ba8fa9 --- /dev/null +++ b/arch/mips/include/asm/irqflags.h @@ -0,0 +1,283 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle + * Copyright (C) 1996 by Paul M. Antoine + * Copyright (C) 1999 Silicon Graphics + * Copyright (C) 2000 MIPS Technologies, Inc. + */ +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +#ifndef __ASSEMBLY__ + +#include +#include + +__asm__( + " .macro raw_local_irq_enable \n" + " .set push \n" + " .set reorder \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n" + " ori $1, 0x400 \n" + " xori $1, 0x400 \n" + " mtc0 $1, $2, 1 \n" +#elif defined(CONFIG_CPU_MIPSR2) + " ei \n" +#else + " mfc0 $1,$12 \n" + " ori $1,0x1f \n" + " xori $1,0x1e \n" + " mtc0 $1,$12 \n" +#endif + " irq_enable_hazard \n" + " .set pop \n" + " .endm"); + +extern void smtc_ipi_replay(void); + +static inline void raw_local_irq_enable(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC kernel needs to do a software replay of queued + * IPIs, at the cost of call overhead on each local_irq_enable() + */ + smtc_ipi_replay(); +#endif + __asm__ __volatile__( + "raw_local_irq_enable" + : /* no outputs */ + : /* no inputs */ + : "memory"); +} + + +/* + * For cli() we have to insert nops to make sure that the new value + * has actually arrived in the status register before the end of this + * macro. + * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs + * no nops at all. + */ +/* + * For TX49, operating only IE bit is not enough. + * + * If mfc0 $12 follows store and the mfc0 is last instruction of a + * page and fetching the next instruction causes TLB miss, the result + * of the mfc0 might wrongly contain EXL bit. + * + * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008 + * + * Workaround: mask EXL bit of the result or place a nop before mfc0. + */ +__asm__( + " .macro raw_local_irq_disable\n" + " .set push \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 $1, $2, 1 \n" + " ori $1, 0x400 \n" + " .set noreorder \n" + " mtc0 $1, $2, 1 \n" +#elif defined(CONFIG_CPU_MIPSR2) + " di \n" +#else + " mfc0 $1,$12 \n" + " ori $1,0x1f \n" + " xori $1,0x1f \n" + " .set noreorder \n" + " mtc0 $1,$12 \n" +#endif + " irq_disable_hazard \n" + " .set pop \n" + " .endm \n"); + +static inline void raw_local_irq_disable(void) +{ + __asm__ __volatile__( + "raw_local_irq_disable" + : /* no outputs */ + : /* no inputs */ + : "memory"); +} + +__asm__( + " .macro raw_local_save_flags flags \n" + " .set push \n" + " .set reorder \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 \\flags, $2, 1 \n" +#else + " mfc0 \\flags, $12 \n" +#endif + " .set pop \n" + " .endm \n"); + +#define raw_local_save_flags(x) \ +__asm__ __volatile__( \ + "raw_local_save_flags %0" \ + : "=r" (x)) + +__asm__( + " .macro raw_local_irq_save result \n" + " .set push \n" + " .set reorder \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 \\result, $2, 1 \n" + " ori $1, \\result, 0x400 \n" + " .set noreorder \n" + " mtc0 $1, $2, 1 \n" + " andi \\result, \\result, 0x400 \n" +#elif defined(CONFIG_CPU_MIPSR2) + " di \\result \n" + " andi \\result, 1 \n" +#else + " mfc0 \\result, $12 \n" + " ori $1, \\result, 0x1f \n" + " xori $1, 0x1f \n" + " .set noreorder \n" + " mtc0 $1, $12 \n" +#endif + " irq_disable_hazard \n" + " .set pop \n" + " .endm \n"); + +#define raw_local_irq_save(x) \ +__asm__ __volatile__( \ + "raw_local_irq_save\t%0" \ + : "=r" (x) \ + : /* no inputs */ \ + : "memory") + +__asm__( + " .macro raw_local_irq_restore flags \n" + " .set push \n" + " .set noreorder \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + "mfc0 $1, $2, 1 \n" + "andi \\flags, 0x400 \n" + "ori $1, 0x400 \n" + "xori $1, 0x400 \n" + "or \\flags, $1 \n" + "mtc0 \\flags, $2, 1 \n" +#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU) + /* + * Slow, but doesn't suffer from a relativly unlikely race + * condition we're having since days 1. + */ + " beqz \\flags, 1f \n" + " di \n" + " ei \n" + "1: \n" +#elif defined(CONFIG_CPU_MIPSR2) + /* + * Fast, dangerous. Life is fun, life is good. + */ + " mfc0 $1, $12 \n" + " ins $1, \\flags, 0, 1 \n" + " mtc0 $1, $12 \n" +#else + " mfc0 $1, $12 \n" + " andi \\flags, 1 \n" + " ori $1, 0x1f \n" + " xori $1, 0x1f \n" + " or \\flags, $1 \n" + " mtc0 \\flags, $12 \n" +#endif + " irq_disable_hazard \n" + " .set pop \n" + " .endm \n"); + + +static inline void raw_local_irq_restore(unsigned long flags) +{ + unsigned long __tmp1; + +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC kernel needs to do a software replay of queued + * IPIs, at the cost of branch and call overhead on each + * local_irq_restore() + */ + if (unlikely(!(flags & 0x0400))) + smtc_ipi_replay(); +#endif + + __asm__ __volatile__( + "raw_local_irq_restore\t%0" + : "=r" (__tmp1) + : "0" (flags) + : "memory"); +} + +static inline void __raw_local_irq_restore(unsigned long flags) +{ + unsigned long __tmp1; + + __asm__ __volatile__( + "raw_local_irq_restore\t%0" + : "=r" (__tmp1) + : "0" (flags) + : "memory"); +} + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU + */ + return flags & 0x400; +#else + return !(flags & 1); +#endif +} + +#endif + +/* + * Do the CPU's IRQ-state tracing from assembly code. + */ +#ifdef CONFIG_TRACE_IRQFLAGS +/* Reload some registers clobbered by trace_hardirqs_on */ +#ifdef CONFIG_64BIT +# define TRACE_IRQS_RELOAD_REGS \ + LONG_L $11, PT_R11(sp); \ + LONG_L $10, PT_R10(sp); \ + LONG_L $9, PT_R9(sp); \ + LONG_L $8, PT_R8(sp); \ + LONG_L $7, PT_R7(sp); \ + LONG_L $6, PT_R6(sp); \ + LONG_L $5, PT_R5(sp); \ + LONG_L $4, PT_R4(sp); \ + LONG_L $2, PT_R2(sp) +#else +# define TRACE_IRQS_RELOAD_REGS \ + LONG_L $7, PT_R7(sp); \ + LONG_L $6, PT_R6(sp); \ + LONG_L $5, PT_R5(sp); \ + LONG_L $4, PT_R4(sp); \ + LONG_L $2, PT_R2(sp) +#endif +# define TRACE_IRQS_ON \ + CLI; /* make sure trace_hardirqs_on() is called in kernel level */ \ + jal trace_hardirqs_on +# define TRACE_IRQS_ON_RELOAD \ + TRACE_IRQS_ON; \ + TRACE_IRQS_RELOAD_REGS +# define TRACE_IRQS_OFF \ + jal trace_hardirqs_off +#else +# define TRACE_IRQS_ON +# define TRACE_IRQS_ON_RELOAD +# define TRACE_IRQS_OFF +#endif + +#endif /* _ASM_IRQFLAGS_H */ diff --git a/arch/mips/include/asm/isadep.h b/arch/mips/include/asm/isadep.h new file mode 100644 index 000000000000..24c6cda79377 --- /dev/null +++ b/arch/mips/include/asm/isadep.h @@ -0,0 +1,34 @@ +/* + * Various ISA level dependent constants. + * Most of the following constants reflect the different layout + * of Coprocessor 0 registers. + * + * Copyright (c) 1998 Harald Koerfgen + */ + +#ifndef __ASM_ISADEP_H +#define __ASM_ISADEP_H + +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) +/* + * R2000 or R3000 + */ + +/* + * kernel or user mode? (CP0_STATUS) + */ +#define KU_MASK 0x08 +#define KU_USER 0x08 +#define KU_KERN 0x00 + +#else +/* + * kernel or user mode? + */ +#define KU_MASK 0x18 +#define KU_USER 0x10 +#define KU_KERN 0x00 + +#endif + +#endif /* __ASM_ISADEP_H */ diff --git a/arch/mips/include/asm/jazz.h b/arch/mips/include/asm/jazz.h new file mode 100644 index 000000000000..83f449dec95e --- /dev/null +++ b/arch/mips/include/asm/jazz.h @@ -0,0 +1,310 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle + */ +#ifndef __ASM_JAZZ_H +#define __ASM_JAZZ_H + +/* + * The addresses below are virtual address. The mappings are + * created on startup via wired entries in the tlb. The Mips + * Magnum R3000 and R4000 machines are similar in many aspects, + * but many hardware register are accessible at 0xb9000000 in + * instead of 0xe0000000. + */ + +#define JAZZ_LOCAL_IO_SPACE 0xe0000000 + +/* + * Revision numbers in PICA_ASIC_REVISION + * + * 0xf0000000 - Rev1 + * 0xf0000001 - Rev2 + * 0xf0000002 - Rev3 + */ +#define PICA_ASIC_REVISION 0xe0000008 + +/* + * The segments of the seven segment LED are mapped + * to the control bits as follows: + * + * (7) + * --------- + * | | + * (2) | | (6) + * | (1) | + * --------- + * | | + * (3) | | (5) + * | (4) | + * --------- . (0) + */ +#define PICA_LED 0xe000f000 + +/* + * Some characters for the LED control registers + * The original Mips machines seem to have a LED display + * with integrated decoder while the Acer machines can + * control each of the seven segments and the dot independently. + * It's only a toy, anyway... + */ +#define LED_DOT 0x01 +#define LED_SPACE 0x00 +#define LED_0 0xfc +#define LED_1 0x60 +#define LED_2 0xda +#define LED_3 0xf2 +#define LED_4 0x66 +#define LED_5 0xb6 +#define LED_6 0xbe +#define LED_7 0xe0 +#define LED_8 0xfe +#define LED_9 0xf6 +#define LED_A 0xee +#define LED_b 0x3e +#define LED_C 0x9c +#define LED_d 0x7a +#define LED_E 0x9e +#define LED_F 0x8e + +#ifndef __ASSEMBLY__ + +static __inline__ void pica_set_led(unsigned int bits) +{ + volatile unsigned int *led_register = (unsigned int *) PICA_LED; + + *led_register = bits; +} + +#endif /* !__ASSEMBLY__ */ + +/* + * Base address of the Sonic Ethernet adapter in Jazz machines. + */ +#define JAZZ_ETHERNET_BASE 0xe0001000 + +/* + * Base address of the 53C94 SCSI hostadapter in Jazz machines. + */ +#define JAZZ_SCSI_BASE 0xe0002000 + +/* + * i8042 keyboard controller for JAZZ and PICA chipsets. + * This address is just a guess and seems to differ from + * other mips machines such as RC3xxx... + */ +#define JAZZ_KEYBOARD_ADDRESS 0xe0005000 +#define JAZZ_KEYBOARD_DATA 0xe0005000 +#define JAZZ_KEYBOARD_COMMAND 0xe0005001 + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned char data; + unsigned char command; +} jazz_keyboard_hardware; + +#define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS) + +typedef struct { + unsigned char pad0[3]; + unsigned char data; + unsigned char pad1[3]; + unsigned char command; +} mips_keyboard_hardware; + +/* + * For now. Needs to be changed for RC3xxx support. See below. + */ +#define keyboard_hardware jazz_keyboard_hardware + +#endif /* !__ASSEMBLY__ */ + +/* + * i8042 keyboard controller for most other Mips machines. + */ +#define MIPS_KEYBOARD_ADDRESS 0xb9005000 +#define MIPS_KEYBOARD_DATA 0xb9005003 +#define MIPS_KEYBOARD_COMMAND 0xb9005007 + +/* + * Serial and parallel ports (WD 16C552) on the Mips JAZZ + */ +#define JAZZ_SERIAL1_BASE (unsigned int)0xe0006000 +#define JAZZ_SERIAL2_BASE (unsigned int)0xe0007000 +#define JAZZ_PARALLEL_BASE (unsigned int)0xe0008000 + +/* + * Dummy Device Address. Used in jazzdma.c + */ +#define JAZZ_DUMMY_DEVICE 0xe000d000 + +/* + * JAZZ timer registers and interrupt no. + * Note that the hardware timer interrupt is actually on + * cpu level 6, but to keep compatibility with PC stuff + * it is remapped to vector 0. See arch/mips/kernel/entry.S. + */ +#define JAZZ_TIMER_INTERVAL 0xe0000228 +#define JAZZ_TIMER_REGISTER 0xe0000230 + +/* + * DRAM configuration register + */ +#ifndef __ASSEMBLY__ +#ifdef __MIPSEL__ +typedef struct { + unsigned int bank2 : 3; + unsigned int bank1 : 3; + unsigned int mem_bus_width : 1; + unsigned int reserved2 : 1; + unsigned int page_mode : 1; + unsigned int reserved1 : 23; +} dram_configuration; +#else /* defined (__MIPSEB__) */ +typedef struct { + unsigned int reserved1 : 23; + unsigned int page_mode : 1; + unsigned int reserved2 : 1; + unsigned int mem_bus_width : 1; + unsigned int bank1 : 3; + unsigned int bank2 : 3; +} dram_configuration; +#endif +#endif /* !__ASSEMBLY__ */ + +#define PICA_DRAM_CONFIG 0xe00fffe0 + +/* + * JAZZ interrupt control registers + */ +#define JAZZ_IO_IRQ_SOURCE 0xe0010000 +#define JAZZ_IO_IRQ_ENABLE 0xe0010002 + +/* + * JAZZ Interrupt Level definitions + * + * This is somewhat broken. For reasons which nobody can remember anymore + * we remap the Jazz interrupts to the usual ISA style interrupt numbers. + */ +#define JAZZ_IRQ_START 24 +#define JAZZ_IRQ_END (24 + 9) +#define JAZZ_PARALLEL_IRQ (JAZZ_IRQ_START + 0) +#define JAZZ_FLOPPY_IRQ (JAZZ_IRQ_START + 1) +#define JAZZ_SOUND_IRQ (JAZZ_IRQ_START + 2) +#define JAZZ_VIDEO_IRQ (JAZZ_IRQ_START + 3) +#define JAZZ_ETHERNET_IRQ (JAZZ_IRQ_START + 4) +#define JAZZ_SCSI_IRQ (JAZZ_IRQ_START + 5) +#define JAZZ_KEYBOARD_IRQ (JAZZ_IRQ_START + 6) +#define JAZZ_MOUSE_IRQ (JAZZ_IRQ_START + 7) +#define JAZZ_SERIAL1_IRQ (JAZZ_IRQ_START + 8) +#define JAZZ_SERIAL2_IRQ (JAZZ_IRQ_START + 9) + +#define JAZZ_TIMER_IRQ (MIPS_CPU_IRQ_BASE+6) + + +/* + * JAZZ DMA Channels + * Note: Channels 4...7 are not used with respect to the Acer PICA-61 + * chipset which does not provide these DMA channels. + */ +#define JAZZ_SCSI_DMA 0 /* SCSI */ +#define JAZZ_FLOPPY_DMA 1 /* FLOPPY */ +#define JAZZ_AUDIOL_DMA 2 /* AUDIO L */ +#define JAZZ_AUDIOR_DMA 3 /* AUDIO R */ + +/* + * JAZZ R4030 MCT_ADR chip (DMA controller) + * Note: Virtual Addresses ! + */ +#define JAZZ_R4030_CONFIG 0xE0000000 /* R4030 config register */ +#define JAZZ_R4030_REVISION 0xE0000008 /* same as PICA_ASIC_REVISION */ +#define JAZZ_R4030_INV_ADDR 0xE0000010 /* Invalid Address register */ + +#define JAZZ_R4030_TRSTBL_BASE 0xE0000018 /* Translation Table Base */ +#define JAZZ_R4030_TRSTBL_LIM 0xE0000020 /* Translation Table Limit */ +#define JAZZ_R4030_TRSTBL_INV 0xE0000028 /* Translation Table Invalidate */ + +#define JAZZ_R4030_CACHE_MTNC 0xE0000030 /* Cache Maintenance */ +#define JAZZ_R4030_R_FAIL_ADDR 0xE0000038 /* Remote Failed Address */ +#define JAZZ_R4030_M_FAIL_ADDR 0xE0000040 /* Memory Failed Address */ + +#define JAZZ_R4030_CACHE_PTAG 0xE0000048 /* I/O Cache Physical Tag */ +#define JAZZ_R4030_CACHE_LTAG 0xE0000050 /* I/O Cache Logical Tag */ +#define JAZZ_R4030_CACHE_BMASK 0xE0000058 /* I/O Cache Byte Mask */ +#define JAZZ_R4030_CACHE_BWIN 0xE0000060 /* I/O Cache Buffer Window */ + +/* + * Remote Speed Registers. + * + * 0: free, 1: Ethernet, 2: SCSI, 3: Floppy, + * 4: RTC, 5: Kb./Mouse 6: serial 1, 7: serial 2, + * 8: parallel, 9: NVRAM, 10: CPU, 11: PROM, + * 12: reserved, 13: free, 14: 7seg LED, 15: ??? + */ +#define JAZZ_R4030_REM_SPEED 0xE0000070 /* 16 Remote Speed Registers */ + /* 0xE0000070,78,80... 0xE00000E8 */ +#define JAZZ_R4030_IRQ_ENABLE 0xE00000E8 /* Internal Interrupt Enable */ +#define JAZZ_R4030_INVAL_ADDR 0xE0000010 /* Invalid address Register */ +#define JAZZ_R4030_IRQ_SOURCE 0xE0000200 /* Interrupt Source Register */ +#define JAZZ_R4030_I386_ERROR 0xE0000208 /* i386/EISA Bus Error */ + +/* + * Virtual (E)ISA controller address + */ +#define JAZZ_EISA_IRQ_ACK 0xE0000238 /* EISA interrupt acknowledge */ + +/* + * Access the R4030 DMA and I/O Controller + */ +#ifndef __ASSEMBLY__ + +static inline void r4030_delay(void) +{ +__asm__ __volatile__( + ".set\tnoreorder\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + ".set\treorder"); +} + +static inline unsigned short r4030_read_reg16(unsigned long addr) +{ + unsigned short ret = *((volatile unsigned short *)addr); + r4030_delay(); + return ret; +} + +static inline unsigned int r4030_read_reg32(unsigned long addr) +{ + unsigned int ret = *((volatile unsigned int *)addr); + r4030_delay(); + return ret; +} + +static inline void r4030_write_reg16(unsigned long addr, unsigned val) +{ + *((volatile unsigned short *)addr) = val; + r4030_delay(); +} + +static inline void r4030_write_reg32(unsigned long addr, unsigned val) +{ + *((volatile unsigned int *)addr) = val; + r4030_delay(); +} + +#endif /* !__ASSEMBLY__ */ + +#define JAZZ_FDC_BASE 0xe0003000 +#define JAZZ_RTC_BASE 0xe0004000 +#define JAZZ_PORT_BASE 0xe2000000 + +#define JAZZ_EISA_BASE 0xe3000000 + +#endif /* __ASM_JAZZ_H */ diff --git a/arch/mips/include/asm/jazzdma.h b/arch/mips/include/asm/jazzdma.h new file mode 100644 index 000000000000..8bb37bba68f0 --- /dev/null +++ b/arch/mips/include/asm/jazzdma.h @@ -0,0 +1,95 @@ +/* + * Helpfile for jazzdma.c -- Mips Jazz R4030 DMA controller support + */ +#ifndef _ASM_JAZZDMA_H +#define _ASM_JAZZDMA_H + +/* + * Prototypes and macros + */ +extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size); +extern int vdma_free(unsigned long laddr); +extern int vdma_remap(unsigned long laddr, unsigned long paddr, + unsigned long size); +extern unsigned long vdma_phys2log(unsigned long paddr); +extern unsigned long vdma_log2phys(unsigned long laddr); +extern void vdma_stats(void); /* for debugging only */ + +extern void vdma_enable(int channel); +extern void vdma_disable(int channel); +extern void vdma_set_mode(int channel, int mode); +extern void vdma_set_addr(int channel, long addr); +extern void vdma_set_count(int channel, int count); +extern int vdma_get_residue(int channel); +extern int vdma_get_enable(int channel); + +/* + * some definitions used by the driver functions + */ +#define VDMA_PAGESIZE 4096 +#define VDMA_PGTBL_ENTRIES 4096 +#define VDMA_PGTBL_SIZE (sizeof(VDMA_PGTBL_ENTRY) * VDMA_PGTBL_ENTRIES) +#define VDMA_PAGE_EMPTY 0xff000000 + +/* + * Macros to get page no. and offset of a given address + * Note that VDMA_PAGE() works for physical addresses only + */ +#define VDMA_PAGE(a) ((unsigned int)(a) >> 12) +#define VDMA_OFFSET(a) ((unsigned int)(a) & (VDMA_PAGESIZE-1)) + +/* + * error code returned by vdma_alloc() + * (See also arch/mips/kernel/jazzdma.c) + */ +#define VDMA_ERROR 0xffffffff + +/* + * VDMA pagetable entry description + */ +typedef volatile struct VDMA_PGTBL_ENTRY { + unsigned int frame; /* physical frame no. */ + unsigned int owner; /* owner of this entry (0=free) */ +} VDMA_PGTBL_ENTRY; + + +/* + * DMA channel control registers + * in the R4030 MCT_ADR chip + */ +#define JAZZ_R4030_CHNL_MODE 0xE0000100 /* 8 DMA Channel Mode Registers, */ + /* 0xE0000100,120,140... */ +#define JAZZ_R4030_CHNL_ENABLE 0xE0000108 /* 8 DMA Channel Enable Regs, */ + /* 0xE0000108,128,148... */ +#define JAZZ_R4030_CHNL_COUNT 0xE0000110 /* 8 DMA Channel Byte Cnt Regs, */ + /* 0xE0000110,130,150... */ +#define JAZZ_R4030_CHNL_ADDR 0xE0000118 /* 8 DMA Channel Address Regs, */ + /* 0xE0000118,138,158... */ + +/* channel enable register bits */ + +#define R4030_CHNL_ENABLE (1<<0) +#define R4030_CHNL_WRITE (1<<1) +#define R4030_TC_INTR (1<<8) +#define R4030_MEM_INTR (1<<9) +#define R4030_ADDR_INTR (1<<10) + +/* + * Channel mode register bits + */ +#define R4030_MODE_ATIME_40 (0) /* device access time on remote bus */ +#define R4030_MODE_ATIME_80 (1) +#define R4030_MODE_ATIME_120 (2) +#define R4030_MODE_ATIME_160 (3) +#define R4030_MODE_ATIME_200 (4) +#define R4030_MODE_ATIME_240 (5) +#define R4030_MODE_ATIME_280 (6) +#define R4030_MODE_ATIME_320 (7) +#define R4030_MODE_WIDTH_8 (1<<3) /* device data bus width */ +#define R4030_MODE_WIDTH_16 (2<<3) +#define R4030_MODE_WIDTH_32 (3<<3) +#define R4030_MODE_INTR_EN (1<<5) +#define R4030_MODE_BURST (1<<6) /* Rev. 2 only */ +#define R4030_MODE_FAST_ACK (1<<7) /* Rev. 2 only */ + +#endif /* _ASM_JAZZDMA_H */ diff --git a/arch/mips/include/asm/kdebug.h b/arch/mips/include/asm/kdebug.h new file mode 100644 index 000000000000..5bf62aafc890 --- /dev/null +++ b/arch/mips/include/asm/kdebug.h @@ -0,0 +1,13 @@ +#ifndef _ASM_MIPS_KDEBUG_H +#define _ASM_MIPS_KDEBUG_H + +#include + +enum die_val { + DIE_OOPS = 1, + DIE_FP, + DIE_TRAP, + DIE_RI, +}; + +#endif /* _ASM_MIPS_KDEBUG_H */ diff --git a/arch/mips/include/asm/kexec.h b/arch/mips/include/asm/kexec.h new file mode 100644 index 000000000000..4314892aaebb --- /dev/null +++ b/arch/mips/include/asm/kexec.h @@ -0,0 +1,30 @@ +/* + * kexec.h for kexec + * Created by on Thu Oct 12 14:59:34 2006 + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#ifndef _MIPS_KEXEC +# define _MIPS_KEXEC + +/* Maximum physical address we can use pages from */ +#define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000) +/* Maximum address we can reach in physical address mode */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (0x20000000) + /* Maximum address we can use for the control code buffer */ +#define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000) + +#define KEXEC_CONTROL_PAGE_SIZE 4096 + +/* The native architecture */ +#define KEXEC_ARCH KEXEC_ARCH_MIPS + +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) +{ + /* Dummy implementation for now */ +} + +#endif /* !_MIPS_KEXEC */ diff --git a/arch/mips/include/asm/kgdb.h b/arch/mips/include/asm/kgdb.h new file mode 100644 index 000000000000..48223b09396c --- /dev/null +++ b/arch/mips/include/asm/kgdb.h @@ -0,0 +1,44 @@ +#ifndef __ASM_KGDB_H_ +#define __ASM_KGDB_H_ + +#ifdef __KERNEL__ + +#include + +#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS32) + +#define KGDB_GDB_REG_SIZE 32 + +#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS64) + +#ifdef CONFIG_32BIT +#define KGDB_GDB_REG_SIZE 32 +#else /* CONFIG_CPU_32BIT */ +#define KGDB_GDB_REG_SIZE 64 +#endif +#else +#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA" +#endif /* _MIPS_ISA */ + +#define BUFMAX 2048 +#if (KGDB_GDB_REG_SIZE == 32) +#define NUMREGBYTES (90*sizeof(u32)) +#define NUMCRITREGBYTES (12*sizeof(u32)) +#else +#define NUMREGBYTES (90*sizeof(u64)) +#define NUMCRITREGBYTES (12*sizeof(u64)) +#endif +#define BREAK_INSTR_SIZE 4 +#define CACHE_FLUSH_IS_SAFE 0 + +extern void arch_kgdb_breakpoint(void); +extern int kgdb_early_setup; +extern void *saved_vectors[32]; +extern void handle_exception(struct pt_regs *regs); +extern void breakinst(void); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_KGDB_H_ */ diff --git a/arch/mips/include/asm/kmap_types.h b/arch/mips/include/asm/kmap_types.h new file mode 100644 index 000000000000..806aae3c5338 --- /dev/null +++ b/arch/mips/include/asm/kmap_types.h @@ -0,0 +1,30 @@ +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + + +#ifdef CONFIG_DEBUG_HIGHMEM +# define D(n) __KM_FENCE_##n , +#else +# define D(n) +#endif + +enum km_type { +D(0) KM_BOUNCE_READ, +D(1) KM_SKB_SUNRPC_DATA, +D(2) KM_SKB_DATA_SOFTIRQ, +D(3) KM_USER0, +D(4) KM_USER1, +D(5) KM_BIO_SRC_IRQ, +D(6) KM_BIO_DST_IRQ, +D(7) KM_PTE0, +D(8) KM_PTE1, +D(9) KM_IRQ0, +D(10) KM_IRQ1, +D(11) KM_SOFTIRQ0, +D(12) KM_SOFTIRQ1, +D(13) KM_TYPE_NR +}; + +#undef D + +#endif diff --git a/arch/mips/include/asm/kspd.h b/arch/mips/include/asm/kspd.h new file mode 100644 index 000000000000..4e9e724c8935 --- /dev/null +++ b/arch/mips/include/asm/kspd.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ + +#ifndef _ASM_KSPD_H +#define _ASM_KSPD_H + +struct kspd_notifications { + void (*kspd_sp_exit)(int sp_id); + + struct list_head list; +}; + +#ifdef CONFIG_MIPS_APSP_KSPD +extern void kspd_notify(struct kspd_notifications *notify); +#else +static inline void kspd_notify(struct kspd_notifications *notify) +{ +} +#endif + +#endif diff --git a/arch/mips/include/asm/lasat/ds1603.h b/arch/mips/include/asm/lasat/ds1603.h new file mode 100644 index 000000000000..edcd7544b358 --- /dev/null +++ b/arch/mips/include/asm/lasat/ds1603.h @@ -0,0 +1,18 @@ +#include + +/* Lasat 100 */ +#define DS1603_REG_100 (KSEG1ADDR(0x1c810000)) +#define DS1603_RST_100 (1 << 2) +#define DS1603_CLK_100 (1 << 0) +#define DS1603_DATA_SHIFT_100 1 +#define DS1603_DATA_100 (1 << DS1603_DATA_SHIFT_100) + +/* Lasat 200 */ +#define DS1603_REG_200 (KSEG1ADDR(0x11000000)) +#define DS1603_RST_200 (1 << 3) +#define DS1603_CLK_200 (1 << 4) +#define DS1603_DATA_200 (1 << 5) + +#define DS1603_DATA_REG_200 (DS1603_REG_200 + 0x10000) +#define DS1603_DATA_READ_SHIFT_200 9 +#define DS1603_DATA_READ_200 (1 << DS1603_DATA_READ_SHIFT_200) diff --git a/arch/mips/include/asm/lasat/eeprom.h b/arch/mips/include/asm/lasat/eeprom.h new file mode 100644 index 000000000000..3dac203697fa --- /dev/null +++ b/arch/mips/include/asm/lasat/eeprom.h @@ -0,0 +1,17 @@ +#include + +/* lasat 100 */ +#define AT93C_REG_100 KSEG1ADDR(0x1c810000) +#define AT93C_RDATA_REG_100 AT93C_REG_100 +#define AT93C_RDATA_SHIFT_100 4 +#define AT93C_WDATA_SHIFT_100 4 +#define AT93C_CS_M_100 (1 << 5) +#define AT93C_CLK_M_100 (1 << 3) + +/* lasat 200 */ +#define AT93C_REG_200 KSEG1ADDR(0x11000000) +#define AT93C_RDATA_REG_200 (AT93C_REG_200+0x10000) +#define AT93C_RDATA_SHIFT_200 8 +#define AT93C_WDATA_SHIFT_200 2 +#define AT93C_CS_M_200 (1 << 0) +#define AT93C_CLK_M_200 (1 << 1) diff --git a/arch/mips/include/asm/lasat/head.h b/arch/mips/include/asm/lasat/head.h new file mode 100644 index 000000000000..f5589f31a197 --- /dev/null +++ b/arch/mips/include/asm/lasat/head.h @@ -0,0 +1,22 @@ +/* + * Image header stuff + */ +#ifndef _HEAD_H +#define _HEAD_H + +#define LASAT_K_MAGIC0_VAL 0xfedeabba +#define LASAT_K_MAGIC1_VAL 0x00bedead + +#ifndef _LANGUAGE_ASSEMBLY +#include +struct bootloader_header { + u32 magic[2]; + u32 version; + u32 image_start; + u32 image_size; + u32 kernel_start; + u32 kernel_entry; +}; +#endif + +#endif /* _HEAD_H */ diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h new file mode 100644 index 000000000000..caeba1e302a2 --- /dev/null +++ b/arch/mips/include/asm/lasat/lasat.h @@ -0,0 +1,258 @@ +/* + * lasat.h + * + * Thomas Horsten + * Copyright (C) 2000 LASAT Networks A/S. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Configuration for LASAT boards, loads the appropriate include files. + */ +#ifndef _LASAT_H +#define _LASAT_H + +#ifndef _LANGUAGE_ASSEMBLY + +extern struct lasat_misc { + volatile u32 *reset_reg; + volatile u32 *flash_wp_reg; + u32 flash_wp_bit; +} *lasat_misc; + +enum lasat_mtdparts { + LASAT_MTD_BOOTLOADER, + LASAT_MTD_SERVICE, + LASAT_MTD_NORMAL, + LASAT_MTD_CONFIG, + LASAT_MTD_FS, + LASAT_MTD_LAST +}; + +/* + * The format of the data record in the EEPROM. + * See Documentation/LASAT/eeprom.txt for a detailed description + * of the fields in this struct, and the LASAT Hardware Configuration + * field specification for a detailed description of the config + * field. + */ +#include + +#define LASAT_EEPROM_VERSION 7 +struct lasat_eeprom_struct { + unsigned int version; + unsigned int cfg[3]; + unsigned char hwaddr[6]; + unsigned char print_partno[12]; + unsigned char term0; + unsigned char print_serial[14]; + unsigned char term1; + unsigned char prod_partno[12]; + unsigned char term2; + unsigned char prod_serial[14]; + unsigned char term3; + unsigned char passwd_hash[16]; + unsigned char pwdnull; + unsigned char vendid; + unsigned char ts_ref; + unsigned char ts_signoff; + unsigned char reserved[11]; + unsigned char debugaccess; + unsigned short prid; + unsigned int serviceflag; + unsigned int ipaddr; + unsigned int netmask; + unsigned int crc32; +}; + +struct lasat_eeprom_struct_pre7 { + unsigned int version; + unsigned int flags[3]; + unsigned char hwaddr0[6]; + unsigned char hwaddr1[6]; + unsigned char print_partno[9]; + unsigned char term0; + unsigned char print_serial[14]; + unsigned char term1; + unsigned char prod_partno[9]; + unsigned char term2; + unsigned char prod_serial[14]; + unsigned char term3; + unsigned char passwd_hash[24]; + unsigned char pwdnull; + unsigned char vendor; + unsigned char ts_ref; + unsigned char ts_signoff; + unsigned char reserved[6]; + unsigned int writecount; + unsigned int ipaddr; + unsigned int netmask; + unsigned int crc32; +}; + +/* Configuration descriptor encoding - see the doc for details */ + +#define LASAT_W0_DSCTYPE(v) (((v)) & 0xf) +#define LASAT_W0_BMID(v) (((v) >> 0x04) & 0xf) +#define LASAT_W0_CPUTYPE(v) (((v) >> 0x08) & 0xf) +#define LASAT_W0_BUSSPEED(v) (((v) >> 0x0c) & 0xf) +#define LASAT_W0_CPUCLK(v) (((v) >> 0x10) & 0xf) +#define LASAT_W0_SDRAMBANKSZ(v) (((v) >> 0x14) & 0xf) +#define LASAT_W0_SDRAMBANKS(v) (((v) >> 0x18) & 0xf) +#define LASAT_W0_L2CACHE(v) (((v) >> 0x1c) & 0xf) + +#define LASAT_W1_EDHAC(v) (((v)) & 0xf) +#define LASAT_W1_HIFN(v) (((v) >> 0x04) & 0x1) +#define LASAT_W1_ISDN(v) (((v) >> 0x05) & 0x1) +#define LASAT_W1_IDE(v) (((v) >> 0x06) & 0x1) +#define LASAT_W1_HDLC(v) (((v) >> 0x07) & 0x1) +#define LASAT_W1_USVERSION(v) (((v) >> 0x08) & 0x1) +#define LASAT_W1_4MACS(v) (((v) >> 0x09) & 0x1) +#define LASAT_W1_EXTSERIAL(v) (((v) >> 0x0a) & 0x1) +#define LASAT_W1_FLASHSIZE(v) (((v) >> 0x0c) & 0xf) +#define LASAT_W1_PCISLOTS(v) (((v) >> 0x10) & 0xf) +#define LASAT_W1_PCI1OPT(v) (((v) >> 0x14) & 0xf) +#define LASAT_W1_PCI2OPT(v) (((v) >> 0x18) & 0xf) +#define LASAT_W1_PCI3OPT(v) (((v) >> 0x1c) & 0xf) + +/* Routines specific to LASAT boards */ + +#define LASAT_BMID_MASQUERADE2 0 +#define LASAT_BMID_MASQUERADEPRO 1 +#define LASAT_BMID_SAFEPIPE25 2 +#define LASAT_BMID_SAFEPIPE50 3 +#define LASAT_BMID_SAFEPIPE100 4 +#define LASAT_BMID_SAFEPIPE5000 5 +#define LASAT_BMID_SAFEPIPE7000 6 +#define LASAT_BMID_SAFEPIPE1000 7 +#if 0 +#define LASAT_BMID_SAFEPIPE30 7 +#define LASAT_BMID_SAFEPIPE5100 8 +#define LASAT_BMID_SAFEPIPE7100 9 +#endif +#define LASAT_BMID_UNKNOWN 0xf +#define LASAT_MAX_BMID_NAMES 9 /* no larger than 15! */ + +#define LASAT_HAS_EDHAC (1 << 0) +#define LASAT_EDHAC_FAST (1 << 1) +#define LASAT_HAS_EADI (1 << 2) +#define LASAT_HAS_HIFN (1 << 3) +#define LASAT_HAS_ISDN (1 << 4) +#define LASAT_HAS_LEASEDLINE_IF (1 << 5) +#define LASAT_HAS_HDC (1 << 6) + +#define LASAT_PRID_MASQUERADE2 0 +#define LASAT_PRID_MASQUERADEPRO 1 +#define LASAT_PRID_SAFEPIPE25 2 +#define LASAT_PRID_SAFEPIPE50 3 +#define LASAT_PRID_SAFEPIPE100 4 +#define LASAT_PRID_SAFEPIPE5000 5 +#define LASAT_PRID_SAFEPIPE7000 6 +#define LASAT_PRID_SAFEPIPE30 7 +#define LASAT_PRID_SAFEPIPE5100 8 +#define LASAT_PRID_SAFEPIPE7100 9 + +#define LASAT_PRID_SAFEPIPE1110 10 +#define LASAT_PRID_SAFEPIPE3020 11 +#define LASAT_PRID_SAFEPIPE3030 12 +#define LASAT_PRID_SAFEPIPE5020 13 +#define LASAT_PRID_SAFEPIPE5030 14 +#define LASAT_PRID_SAFEPIPE1120 15 +#define LASAT_PRID_SAFEPIPE1130 16 +#define LASAT_PRID_SAFEPIPE6010 17 +#define LASAT_PRID_SAFEPIPE6110 18 +#define LASAT_PRID_SAFEPIPE6210 19 +#define LASAT_PRID_SAFEPIPE1020 20 +#define LASAT_PRID_SAFEPIPE1040 21 +#define LASAT_PRID_SAFEPIPE1060 22 + +struct lasat_info { + unsigned int li_cpu_hz; + unsigned int li_bus_hz; + unsigned int li_bmid; + unsigned int li_memsize; + unsigned int li_flash_size; + unsigned int li_prid; + unsigned char li_bmstr[16]; + unsigned char li_namestr[32]; + unsigned char li_typestr[16]; + /* Info on the Flash layout */ + unsigned int li_flash_base; + unsigned long li_flashpart_base[LASAT_MTD_LAST]; + unsigned long li_flashpart_size[LASAT_MTD_LAST]; + struct lasat_eeprom_struct li_eeprom_info; + unsigned int li_eeprom_upgrade_version; + unsigned int li_debugaccess; +}; + +extern struct lasat_info lasat_board_info; + +static inline unsigned long lasat_flash_partition_start(int partno) +{ + if (partno < 0 || partno >= LASAT_MTD_LAST) + return 0; + + return lasat_board_info.li_flashpart_base[partno]; +} + +static inline unsigned long lasat_flash_partition_size(int partno) +{ + if (partno < 0 || partno >= LASAT_MTD_LAST) + return 0; + + return lasat_board_info.li_flashpart_size[partno]; +} + +/* Called from setup() to initialize the global board_info struct */ +extern int lasat_init_board_info(void); + +/* Write the modified EEPROM info struct */ +extern void lasat_write_eeprom_info(void); + +#define N_MACHTYPES 2 +/* for calibration of delays */ + +/* the lasat_ndelay function is necessary because it is used at an + * early stage of the boot process where ndelay is not calibrated. + * It is used for the bit-banging rtc and eeprom drivers */ + +#include + +/* calculating with the slowest board with 100 MHz clock */ +#define LASAT_100_DIVIDER 20 +/* All 200's run at 250 MHz clock */ +#define LASAT_200_DIVIDER 8 + +extern unsigned int lasat_ndelay_divider; + +static inline void lasat_ndelay(unsigned int ns) +{ + __delay(ns / lasat_ndelay_divider); +} + +#define IS_LASAT_200() (current_cpu_data.cputype == CPU_R5000) + +#endif /* !defined (_LANGUAGE_ASSEMBLY) */ + +#define LASAT_SERVICEMODE_MAGIC_1 0xdeadbeef +#define LASAT_SERVICEMODE_MAGIC_2 0xfedeabba + +/* Lasat 100 boards */ +#define LASAT_GT_BASE (KSEG1ADDR(0x14000000)) + +/* Lasat 200 boards */ +#define Vrc5074_PHYS_BASE 0x1fa00000 +#define Vrc5074_BASE (KSEG1ADDR(Vrc5074_PHYS_BASE)) +#define PCI_WINDOW1 0x1a000000 + +#endif /* _LASAT_H */ diff --git a/arch/mips/include/asm/lasat/lasatint.h b/arch/mips/include/asm/lasat/lasatint.h new file mode 100644 index 000000000000..e0d2458b43d0 --- /dev/null +++ b/arch/mips/include/asm/lasat/lasatint.h @@ -0,0 +1,14 @@ +#ifndef __ASM_LASAT_LASATINT_H +#define __ASM_LASAT_LASATINT_H + +/* lasat 100 */ +#define LASAT_INT_STATUS_REG_100 (KSEG1ADDR(0x1c880000)) +#define LASAT_INT_MASK_REG_100 (KSEG1ADDR(0x1c890000)) +#define LASATINT_MASK_SHIFT_100 0 + +/* lasat 200 */ +#define LASAT_INT_STATUS_REG_200 (KSEG1ADDR(0x1104003c)) +#define LASAT_INT_MASK_REG_200 (KSEG1ADDR(0x1104003c)) +#define LASATINT_MASK_SHIFT_200 16 + +#endif /* __ASM_LASAT_LASATINT_H */ diff --git a/arch/mips/include/asm/lasat/picvue.h b/arch/mips/include/asm/lasat/picvue.h new file mode 100644 index 000000000000..42a492edc40e --- /dev/null +++ b/arch/mips/include/asm/lasat/picvue.h @@ -0,0 +1,15 @@ +/* Lasat 100 */ +#define PVC_REG_100 KSEG1ADDR(0x1c820000) +#define PVC_DATA_SHIFT_100 0 +#define PVC_DATA_M_100 0xFF +#define PVC_E_100 (1 << 8) +#define PVC_RW_100 (1 << 9) +#define PVC_RS_100 (1 << 10) + +/* Lasat 200 */ +#define PVC_REG_200 KSEG1ADDR(0x11000000) +#define PVC_DATA_SHIFT_200 24 +#define PVC_DATA_M_200 (0xFF << PVC_DATA_SHIFT_200) +#define PVC_E_200 (1 << 16) +#define PVC_RW_200 (1 << 17) +#define PVC_RS_200 (1 << 18) diff --git a/arch/mips/include/asm/lasat/serial.h b/arch/mips/include/asm/lasat/serial.h new file mode 100644 index 000000000000..1c37d70579b8 --- /dev/null +++ b/arch/mips/include/asm/lasat/serial.h @@ -0,0 +1,13 @@ +#include + +/* Lasat 100 boards serial configuration */ +#define LASAT_BASE_BAUD_100 (7372800 / 16) +#define LASAT_UART_REGS_BASE_100 0x1c8b0000 +#define LASAT_UART_REGS_SHIFT_100 2 +#define LASATINT_UART_100 16 + +/* * LASAT 200 boards serial configuration */ +#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12) +#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300) +#define LASAT_UART_REGS_SHIFT_200 3 +#define LASATINT_UART_200 21 diff --git a/arch/mips/include/asm/linkage.h b/arch/mips/include/asm/linkage.h new file mode 100644 index 000000000000..e9a940d1b0c6 --- /dev/null +++ b/arch/mips/include/asm/linkage.h @@ -0,0 +1,10 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#ifdef __ASSEMBLY__ +#include +#endif + +#define __weak __attribute__((weak)) + +#endif diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h new file mode 100644 index 000000000000..f96fd59e0845 --- /dev/null +++ b/arch/mips/include/asm/local.h @@ -0,0 +1,221 @@ +#ifndef _ARCH_MIPS_LOCAL_H +#define _ARCH_MIPS_LOCAL_H + +#include +#include +#include +#include +#include + +typedef struct +{ + atomic_long_t a; +} local_t; + +#define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) } + +#define local_read(l) atomic_long_read(&(l)->a) +#define local_set(l, i) atomic_long_set(&(l)->a, (i)) + +#define local_add(i, l) atomic_long_add((i), (&(l)->a)) +#define local_sub(i, l) atomic_long_sub((i), (&(l)->a)) +#define local_inc(l) atomic_long_inc(&(l)->a) +#define local_dec(l) atomic_long_dec(&(l)->a) + +/* + * Same as above, but return the result value + */ +static __inline__ long local_add_return(long i, local_t * l) +{ + unsigned long result; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1:" __LL "%1, %2 # local_add_return \n" + " addu %0, %1, %3 \n" + __SC "%0, %2 \n" + " beqzl %0, 1b \n" + " addu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) + : "Ir" (i), "m" (l->a.counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1:" __LL "%1, %2 # local_add_return \n" + " addu %0, %1, %3 \n" + __SC "%0, %2 \n" + " beqz %0, 1b \n" + " addu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) + : "Ir" (i), "m" (l->a.counter) + : "memory"); + } else { + unsigned long flags; + + local_irq_save(flags); + result = l->a.counter; + result += i; + l->a.counter = result; + local_irq_restore(flags); + } + + return result; +} + +static __inline__ long local_sub_return(long i, local_t * l) +{ + unsigned long result; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1:" __LL "%1, %2 # local_sub_return \n" + " subu %0, %1, %3 \n" + __SC "%0, %2 \n" + " beqzl %0, 1b \n" + " subu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) + : "Ir" (i), "m" (l->a.counter) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long temp; + + __asm__ __volatile__( + " .set mips3 \n" + "1:" __LL "%1, %2 # local_sub_return \n" + " subu %0, %1, %3 \n" + __SC "%0, %2 \n" + " beqz %0, 1b \n" + " subu %0, %1, %3 \n" + " .set mips0 \n" + : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) + : "Ir" (i), "m" (l->a.counter) + : "memory"); + } else { + unsigned long flags; + + local_irq_save(flags); + result = l->a.counter; + result -= i; + l->a.counter = result; + local_irq_restore(flags); + } + + return result; +} + +#define local_cmpxchg(l, o, n) \ + ((long)cmpxchg_local(&((l)->a.counter), (o), (n))) +#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n))) + +/** + * local_add_unless - add unless the number is a given value + * @l: pointer of type local_t + * @a: the amount to add to l... + * @u: ...unless l is equal to u. + * + * Atomically adds @a to @l, so long as it was not @u. + * Returns non-zero if @l was not @u, and zero otherwise. + */ +#define local_add_unless(l, a, u) \ +({ \ + long c, old; \ + c = local_read(l); \ + while (c != (u) && (old = local_cmpxchg((l), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) +#define local_inc_not_zero(l) local_add_unless((l), 1, 0) + +#define local_dec_return(l) local_sub_return(1, (l)) +#define local_inc_return(l) local_add_return(1, (l)) + +/* + * local_sub_and_test - subtract value from variable and test result + * @i: integer value to subtract + * @l: pointer of type local_t + * + * Atomically subtracts @i from @l and returns + * true if the result is zero, or false for all + * other cases. + */ +#define local_sub_and_test(i, l) (local_sub_return((i), (l)) == 0) + +/* + * local_inc_and_test - increment and test + * @l: pointer of type local_t + * + * Atomically increments @l by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define local_inc_and_test(l) (local_inc_return(l) == 0) + +/* + * local_dec_and_test - decrement by 1 and test + * @l: pointer of type local_t + * + * Atomically decrements @l by 1 and + * returns true if the result is 0, or false for all other + * cases. + */ +#define local_dec_and_test(l) (local_sub_return(1, (l)) == 0) + +/* + * local_add_negative - add and test if negative + * @l: pointer of type local_t + * @i: integer value to add + * + * Atomically adds @i to @l and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +#define local_add_negative(i, l) (local_add_return(i, (l)) < 0) + +/* Use these for per-cpu local_t variables: on some archs they are + * much more efficient than these naive implementations. Note they take + * a variable, not an address. + */ + +#define __local_inc(l) ((l)->a.counter++) +#define __local_dec(l) ((l)->a.counter++) +#define __local_add(i, l) ((l)->a.counter+=(i)) +#define __local_sub(i, l) ((l)->a.counter-=(i)) + +/* Need to disable preemption for the cpu local counters otherwise we could + still access a variable of a previous CPU in a non atomic way. */ +#define cpu_local_wrap_v(l) \ + ({ local_t res__; \ + preempt_disable(); \ + res__ = (l); \ + preempt_enable(); \ + res__; }) +#define cpu_local_wrap(l) \ + ({ preempt_disable(); \ + l; \ + preempt_enable(); }) \ + +#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l))) +#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i))) +#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l))) +#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l))) +#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l))) +#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l))) + +#define __cpu_local_inc(l) cpu_local_inc(l) +#define __cpu_local_dec(l) cpu_local_dec(l) +#define __cpu_local_add(i, l) cpu_local_add((i), (l)) +#define __cpu_local_sub(i, l) cpu_local_sub((i), (l)) + +#endif /* _ARCH_MIPS_LOCAL_H */ diff --git a/arch/mips/include/asm/m48t35.h b/arch/mips/include/asm/m48t35.h new file mode 100644 index 000000000000..f44852e9a96d --- /dev/null +++ b/arch/mips/include/asm/m48t35.h @@ -0,0 +1,27 @@ +/* + * Registers for the SGS-Thomson M48T35 Timekeeper RAM chip + */ +#ifndef _ASM_M48T35_H +#define _ASM_M48T35_H + +#include + +extern spinlock_t rtc_lock; + +struct m48t35_rtc { + volatile u8 pad[0x7ff8]; /* starts at 0x7ff8 */ + volatile u8 control; + volatile u8 sec; + volatile u8 min; + volatile u8 hour; + volatile u8 day; + volatile u8 date; + volatile u8 month; + volatile u8 year; +}; + +#define M48T35_RTC_SET 0x80 +#define M48T35_RTC_STOPPED 0x80 +#define M48T35_RTC_READ 0x40 + +#endif /* _ASM_M48T35_H */ diff --git a/arch/mips/include/asm/m48t37.h b/arch/mips/include/asm/m48t37.h new file mode 100644 index 000000000000..cabf86264f36 --- /dev/null +++ b/arch/mips/include/asm/m48t37.h @@ -0,0 +1,35 @@ +/* + * Registers for the SGS-Thomson M48T37 Timekeeper RAM chip + */ +#ifndef _ASM_M48T37_H +#define _ASM_M48T37_H + +#include + +extern spinlock_t rtc_lock; + +struct m48t37_rtc { + volatile u8 pad[0x7ff0]; /* NVRAM */ + volatile u8 flags; + volatile u8 century; + volatile u8 alarm_sec; + volatile u8 alarm_min; + volatile u8 alarm_hour; + volatile u8 alarm_data; + volatile u8 interrupts; + volatile u8 watchdog; + volatile u8 control; + volatile u8 sec; + volatile u8 min; + volatile u8 hour; + volatile u8 day; + volatile u8 date; + volatile u8 month; + volatile u8 year; +}; + +#define M48T37_RTC_SET 0x80 +#define M48T37_RTC_STOPPED 0x80 +#define M48T37_RTC_READ 0x40 + +#endif /* _ASM_M48T37_H */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h new file mode 100644 index 000000000000..0d302bad4492 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -0,0 +1,1772 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Include file for Alchemy Semiconductor's Au1k CPU. + * + * Copyright 2000-2001, 2006-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + /* + * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp + */ + +#ifndef _AU1000_H_ +#define _AU1000_H_ + + +#ifndef _LANGUAGE_ASSEMBLY + +#include +#include + +#include +#include + +/* cpu pipeline flush */ +void static inline au_sync(void) +{ + __asm__ volatile ("sync"); +} + +void static inline au_sync_udelay(int us) +{ + __asm__ volatile ("sync"); + udelay(us); +} + +void static inline au_sync_delay(int ms) +{ + __asm__ volatile ("sync"); + mdelay(ms); +} + +void static inline au_writeb(u8 val, unsigned long reg) +{ + *(volatile u8 *)reg = val; +} + +void static inline au_writew(u16 val, unsigned long reg) +{ + *(volatile u16 *)reg = val; +} + +void static inline au_writel(u32 val, unsigned long reg) +{ + *(volatile u32 *)reg = val; +} + +static inline u8 au_readb(unsigned long reg) +{ + return *(volatile u8 *)reg; +} + +static inline u16 au_readw(unsigned long reg) +{ + return *(volatile u16 *)reg; +} + +static inline u32 au_readl(unsigned long reg) +{ + return *(volatile u32 *)reg; +} + + +/* arch/mips/au1000/common/clocks.c */ +extern void set_au1x00_speed(unsigned int new_freq); +extern unsigned int get_au1x00_speed(void); +extern void set_au1x00_uart_baud_base(unsigned long new_baud_base); +extern unsigned long get_au1x00_uart_baud_base(void); +extern void set_au1x00_lcd_clock(void); +extern unsigned int get_au1x00_lcd_clock(void); + +/* + * Every board describes its IRQ mapping with this table. + */ +struct au1xxx_irqmap { + int im_irq; + int im_type; + int im_request; +}; + +/* + * init_IRQ looks for a table with this name. + */ +extern struct au1xxx_irqmap au1xxx_irq_map[]; + +#endif /* !defined (_LANGUAGE_ASSEMBLY) */ + +/* + * SDRAM register offsets + */ +#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \ + defined(CONFIG_SOC_AU1100) +#define MEM_SDMODE0 0x0000 +#define MEM_SDMODE1 0x0004 +#define MEM_SDMODE2 0x0008 +#define MEM_SDADDR0 0x000C +#define MEM_SDADDR1 0x0010 +#define MEM_SDADDR2 0x0014 +#define MEM_SDREFCFG 0x0018 +#define MEM_SDPRECMD 0x001C +#define MEM_SDAUTOREF 0x0020 +#define MEM_SDWRMD0 0x0024 +#define MEM_SDWRMD1 0x0028 +#define MEM_SDWRMD2 0x002C +#define MEM_SDSLEEP 0x0030 +#define MEM_SDSMCKE 0x0034 + +/* + * MEM_SDMODE register content definitions + */ +#define MEM_SDMODE_F (1 << 22) +#define MEM_SDMODE_SR (1 << 21) +#define MEM_SDMODE_BS (1 << 20) +#define MEM_SDMODE_RS (3 << 18) +#define MEM_SDMODE_CS (7 << 15) +#define MEM_SDMODE_TRAS (15 << 11) +#define MEM_SDMODE_TMRD (3 << 9) +#define MEM_SDMODE_TWR (3 << 7) +#define MEM_SDMODE_TRP (3 << 5) +#define MEM_SDMODE_TRCD (3 << 3) +#define MEM_SDMODE_TCL (7 << 0) + +#define MEM_SDMODE_BS_2Bank (0 << 20) +#define MEM_SDMODE_BS_4Bank (1 << 20) +#define MEM_SDMODE_RS_11Row (0 << 18) +#define MEM_SDMODE_RS_12Row (1 << 18) +#define MEM_SDMODE_RS_13Row (2 << 18) +#define MEM_SDMODE_RS_N(N) ((N) << 18) +#define MEM_SDMODE_CS_7Col (0 << 15) +#define MEM_SDMODE_CS_8Col (1 << 15) +#define MEM_SDMODE_CS_9Col (2 << 15) +#define MEM_SDMODE_CS_10Col (3 << 15) +#define MEM_SDMODE_CS_11Col (4 << 15) +#define MEM_SDMODE_CS_N(N) ((N) << 15) +#define MEM_SDMODE_TRAS_N(N) ((N) << 11) +#define MEM_SDMODE_TMRD_N(N) ((N) << 9) +#define MEM_SDMODE_TWR_N(N) ((N) << 7) +#define MEM_SDMODE_TRP_N(N) ((N) << 5) +#define MEM_SDMODE_TRCD_N(N) ((N) << 3) +#define MEM_SDMODE_TCL_N(N) ((N) << 0) + +/* + * MEM_SDADDR register contents definitions + */ +#define MEM_SDADDR_E (1 << 20) +#define MEM_SDADDR_CSBA (0x03FF << 10) +#define MEM_SDADDR_CSMASK (0x03FF << 0) +#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12) +#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22) + +/* + * MEM_SDREFCFG register content definitions + */ +#define MEM_SDREFCFG_TRC (15 << 28) +#define MEM_SDREFCFG_TRPM (3 << 26) +#define MEM_SDREFCFG_E (1 << 25) +#define MEM_SDREFCFG_RE (0x1ffffff << 0) +#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC) +#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM) +#define MEM_SDREFCFG_REF_N(N) (N) +#endif + +/***********************************************************************/ + +/* + * Au1550 SDRAM Register Offsets + */ + +/***********************************************************************/ + +#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) +#define MEM_SDMODE0 0x0800 +#define MEM_SDMODE1 0x0808 +#define MEM_SDMODE2 0x0810 +#define MEM_SDADDR0 0x0820 +#define MEM_SDADDR1 0x0828 +#define MEM_SDADDR2 0x0830 +#define MEM_SDCONFIGA 0x0840 +#define MEM_SDCONFIGB 0x0848 +#define MEM_SDSTAT 0x0850 +#define MEM_SDERRADDR 0x0858 +#define MEM_SDSTRIDE0 0x0860 +#define MEM_SDSTRIDE1 0x0868 +#define MEM_SDSTRIDE2 0x0870 +#define MEM_SDWRMD0 0x0880 +#define MEM_SDWRMD1 0x0888 +#define MEM_SDWRMD2 0x0890 +#define MEM_SDPRECMD 0x08C0 +#define MEM_SDAUTOREF 0x08C8 +#define MEM_SDSREF 0x08D0 +#define MEM_SDSLEEP MEM_SDSREF + +#endif + +/* + * Physical base addresses for integrated peripherals + */ + +#ifdef CONFIG_SOC_AU1000 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define DMA0_PHYS_ADDR 0x14002000 +#define DMA1_PHYS_ADDR 0x14002100 +#define DMA2_PHYS_ADDR 0x14002200 +#define DMA3_PHYS_ADDR 0x14002300 +#define DMA4_PHYS_ADDR 0x14002400 +#define DMA5_PHYS_ADDR 0x14002500 +#define DMA6_PHYS_ADDR 0x14002600 +#define DMA7_PHYS_ADDR 0x14002700 +#define IC0_PHYS_ADDR 0x10400000 +#define IC1_PHYS_ADDR 0x11800000 +#define AC97_PHYS_ADDR 0x10000000 +#define USBH_PHYS_ADDR 0x10100000 +#define USBD_PHYS_ADDR 0x10200000 +#define IRDA_PHYS_ADDR 0x10300000 +#define MAC0_PHYS_ADDR 0x10500000 +#define MAC1_PHYS_ADDR 0x10510000 +#define MACEN_PHYS_ADDR 0x10520000 +#define MACDMA0_PHYS_ADDR 0x14004000 +#define MACDMA1_PHYS_ADDR 0x14004200 +#define I2S_PHYS_ADDR 0x11000000 +#define UART0_PHYS_ADDR 0x11100000 +#define UART1_PHYS_ADDR 0x11200000 +#define UART2_PHYS_ADDR 0x11300000 +#define UART3_PHYS_ADDR 0x11400000 +#define SSI0_PHYS_ADDR 0x11600000 +#define SSI1_PHYS_ADDR 0x11680000 +#define SYS_PHYS_ADDR 0x11900000 +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#endif + +/********************************************************************/ + +#ifdef CONFIG_SOC_AU1500 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define DMA0_PHYS_ADDR 0x14002000 +#define DMA1_PHYS_ADDR 0x14002100 +#define DMA2_PHYS_ADDR 0x14002200 +#define DMA3_PHYS_ADDR 0x14002300 +#define DMA4_PHYS_ADDR 0x14002400 +#define DMA5_PHYS_ADDR 0x14002500 +#define DMA6_PHYS_ADDR 0x14002600 +#define DMA7_PHYS_ADDR 0x14002700 +#define IC0_PHYS_ADDR 0x10400000 +#define IC1_PHYS_ADDR 0x11800000 +#define AC97_PHYS_ADDR 0x10000000 +#define USBH_PHYS_ADDR 0x10100000 +#define USBD_PHYS_ADDR 0x10200000 +#define PCI_PHYS_ADDR 0x14005000 +#define MAC0_PHYS_ADDR 0x11500000 +#define MAC1_PHYS_ADDR 0x11510000 +#define MACEN_PHYS_ADDR 0x11520000 +#define MACDMA0_PHYS_ADDR 0x14004000 +#define MACDMA1_PHYS_ADDR 0x14004200 +#define I2S_PHYS_ADDR 0x11000000 +#define UART0_PHYS_ADDR 0x11100000 +#define UART3_PHYS_ADDR 0x11400000 +#define GPIO2_PHYS_ADDR 0x11700000 +#define SYS_PHYS_ADDR 0x11900000 +#define PCI_MEM_PHYS_ADDR 0x400000000ULL +#define PCI_IO_PHYS_ADDR 0x500000000ULL +#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL +#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#endif + +/********************************************************************/ + +#ifdef CONFIG_SOC_AU1100 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define DMA0_PHYS_ADDR 0x14002000 +#define DMA1_PHYS_ADDR 0x14002100 +#define DMA2_PHYS_ADDR 0x14002200 +#define DMA3_PHYS_ADDR 0x14002300 +#define DMA4_PHYS_ADDR 0x14002400 +#define DMA5_PHYS_ADDR 0x14002500 +#define DMA6_PHYS_ADDR 0x14002600 +#define DMA7_PHYS_ADDR 0x14002700 +#define IC0_PHYS_ADDR 0x10400000 +#define SD0_PHYS_ADDR 0x10600000 +#define SD1_PHYS_ADDR 0x10680000 +#define IC1_PHYS_ADDR 0x11800000 +#define AC97_PHYS_ADDR 0x10000000 +#define USBH_PHYS_ADDR 0x10100000 +#define USBD_PHYS_ADDR 0x10200000 +#define IRDA_PHYS_ADDR 0x10300000 +#define MAC0_PHYS_ADDR 0x10500000 +#define MACEN_PHYS_ADDR 0x10520000 +#define MACDMA0_PHYS_ADDR 0x14004000 +#define MACDMA1_PHYS_ADDR 0x14004200 +#define I2S_PHYS_ADDR 0x11000000 +#define UART0_PHYS_ADDR 0x11100000 +#define UART1_PHYS_ADDR 0x11200000 +#define UART3_PHYS_ADDR 0x11400000 +#define SSI0_PHYS_ADDR 0x11600000 +#define SSI1_PHYS_ADDR 0x11680000 +#define GPIO2_PHYS_ADDR 0x11700000 +#define SYS_PHYS_ADDR 0x11900000 +#define LCD_PHYS_ADDR 0x15000000 +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#endif + +/***********************************************************************/ + +#ifdef CONFIG_SOC_AU1550 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define IC0_PHYS_ADDR 0x10400000 +#define IC1_PHYS_ADDR 0x11800000 +#define USBH_PHYS_ADDR 0x14020000 +#define USBD_PHYS_ADDR 0x10200000 +#define PCI_PHYS_ADDR 0x14005000 +#define MAC0_PHYS_ADDR 0x10500000 +#define MAC1_PHYS_ADDR 0x10510000 +#define MACEN_PHYS_ADDR 0x10520000 +#define MACDMA0_PHYS_ADDR 0x14004000 +#define MACDMA1_PHYS_ADDR 0x14004200 +#define UART0_PHYS_ADDR 0x11100000 +#define UART1_PHYS_ADDR 0x11200000 +#define UART3_PHYS_ADDR 0x11400000 +#define GPIO2_PHYS_ADDR 0x11700000 +#define SYS_PHYS_ADDR 0x11900000 +#define DDMA_PHYS_ADDR 0x14002000 +#define PE_PHYS_ADDR 0x14008000 +#define PSC0_PHYS_ADDR 0x11A00000 +#define PSC1_PHYS_ADDR 0x11B00000 +#define PSC2_PHYS_ADDR 0x10A00000 +#define PSC3_PHYS_ADDR 0x10B00000 +#define PCI_MEM_PHYS_ADDR 0x400000000ULL +#define PCI_IO_PHYS_ADDR 0x500000000ULL +#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL +#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#endif + +/***********************************************************************/ + +#ifdef CONFIG_SOC_AU1200 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define AES_PHYS_ADDR 0x10300000 +#define CIM_PHYS_ADDR 0x14004000 +#define IC0_PHYS_ADDR 0x10400000 +#define IC1_PHYS_ADDR 0x11800000 +#define USBM_PHYS_ADDR 0x14020000 +#define USBH_PHYS_ADDR 0x14020100 +#define UART0_PHYS_ADDR 0x11100000 +#define UART1_PHYS_ADDR 0x11200000 +#define GPIO2_PHYS_ADDR 0x11700000 +#define SYS_PHYS_ADDR 0x11900000 +#define DDMA_PHYS_ADDR 0x14002000 +#define PSC0_PHYS_ADDR 0x11A00000 +#define PSC1_PHYS_ADDR 0x11B00000 +#define SD0_PHYS_ADDR 0x10600000 +#define SD1_PHYS_ADDR 0x10680000 +#define LCD_PHYS_ADDR 0x15000000 +#define SWCNT_PHYS_ADDR 0x1110010C +#define MAEFE_PHYS_ADDR 0x14012000 +#define MAEBE_PHYS_ADDR 0x14010000 +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#endif + +/* Static Bus Controller */ +#define MEM_STCFG0 0xB4001000 +#define MEM_STTIME0 0xB4001004 +#define MEM_STADDR0 0xB4001008 + +#define MEM_STCFG1 0xB4001010 +#define MEM_STTIME1 0xB4001014 +#define MEM_STADDR1 0xB4001018 + +#define MEM_STCFG2 0xB4001020 +#define MEM_STTIME2 0xB4001024 +#define MEM_STADDR2 0xB4001028 + +#define MEM_STCFG3 0xB4001030 +#define MEM_STTIME3 0xB4001034 +#define MEM_STADDR3 0xB4001038 + +#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) +#define MEM_STNDCTL 0xB4001100 +#define MEM_STSTAT 0xB4001104 + +#define MEM_STNAND_CMD 0x0 +#define MEM_STNAND_ADDR 0x4 +#define MEM_STNAND_DATA 0x20 +#endif + +/* Interrupt Controller 0 */ +#define IC0_CFG0RD 0xB0400040 +#define IC0_CFG0SET 0xB0400040 +#define IC0_CFG0CLR 0xB0400044 + +#define IC0_CFG1RD 0xB0400048 +#define IC0_CFG1SET 0xB0400048 +#define IC0_CFG1CLR 0xB040004C + +#define IC0_CFG2RD 0xB0400050 +#define IC0_CFG2SET 0xB0400050 +#define IC0_CFG2CLR 0xB0400054 + +#define IC0_REQ0INT 0xB0400054 +#define IC0_SRCRD 0xB0400058 +#define IC0_SRCSET 0xB0400058 +#define IC0_SRCCLR 0xB040005C +#define IC0_REQ1INT 0xB040005C + +#define IC0_ASSIGNRD 0xB0400060 +#define IC0_ASSIGNSET 0xB0400060 +#define IC0_ASSIGNCLR 0xB0400064 + +#define IC0_WAKERD 0xB0400068 +#define IC0_WAKESET 0xB0400068 +#define IC0_WAKECLR 0xB040006C + +#define IC0_MASKRD 0xB0400070 +#define IC0_MASKSET 0xB0400070 +#define IC0_MASKCLR 0xB0400074 + +#define IC0_RISINGRD 0xB0400078 +#define IC0_RISINGCLR 0xB0400078 +#define IC0_FALLINGRD 0xB040007C +#define IC0_FALLINGCLR 0xB040007C + +#define IC0_TESTBIT 0xB0400080 + +/* Interrupt Controller 1 */ +#define IC1_CFG0RD 0xB1800040 +#define IC1_CFG0SET 0xB1800040 +#define IC1_CFG0CLR 0xB1800044 + +#define IC1_CFG1RD 0xB1800048 +#define IC1_CFG1SET 0xB1800048 +#define IC1_CFG1CLR 0xB180004C + +#define IC1_CFG2RD 0xB1800050 +#define IC1_CFG2SET 0xB1800050 +#define IC1_CFG2CLR 0xB1800054 + +#define IC1_REQ0INT 0xB1800054 +#define IC1_SRCRD 0xB1800058 +#define IC1_SRCSET 0xB1800058 +#define IC1_SRCCLR 0xB180005C +#define IC1_REQ1INT 0xB180005C + +#define IC1_ASSIGNRD 0xB1800060 +#define IC1_ASSIGNSET 0xB1800060 +#define IC1_ASSIGNCLR 0xB1800064 + +#define IC1_WAKERD 0xB1800068 +#define IC1_WAKESET 0xB1800068 +#define IC1_WAKECLR 0xB180006C + +#define IC1_MASKRD 0xB1800070 +#define IC1_MASKSET 0xB1800070 +#define IC1_MASKCLR 0xB1800074 + +#define IC1_RISINGRD 0xB1800078 +#define IC1_RISINGCLR 0xB1800078 +#define IC1_FALLINGRD 0xB180007C +#define IC1_FALLINGCLR 0xB180007C + +#define IC1_TESTBIT 0xB1800080 + +/* Interrupt Configuration Modes */ +#define INTC_INT_DISABLED 0x0 +#define INTC_INT_RISE_EDGE 0x1 +#define INTC_INT_FALL_EDGE 0x2 +#define INTC_INT_RISE_AND_FALL_EDGE 0x3 +#define INTC_INT_HIGH_LEVEL 0x5 +#define INTC_INT_LOW_LEVEL 0x6 +#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 + +/* Interrupt Numbers */ +/* Au1000 */ +#ifdef CONFIG_SOC_AU1000 +enum soc_au1000_ints { + AU1000_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, + AU1000_UART0_INT = AU1000_FIRST_INT, + AU1000_UART1_INT, /* au1000 */ + AU1000_UART2_INT, /* au1000 */ + AU1000_UART3_INT, + AU1000_SSI0_INT, /* au1000 */ + AU1000_SSI1_INT, /* au1000 */ + AU1000_DMA_INT_BASE, + + AU1000_TOY_INT = AU1000_FIRST_INT + 14, + AU1000_TOY_MATCH0_INT, + AU1000_TOY_MATCH1_INT, + AU1000_TOY_MATCH2_INT, + AU1000_RTC_INT, + AU1000_RTC_MATCH0_INT, + AU1000_RTC_MATCH1_INT, + AU1000_RTC_MATCH2_INT, + AU1000_IRDA_TX_INT, /* au1000 */ + AU1000_IRDA_RX_INT, /* au1000 */ + AU1000_USB_DEV_REQ_INT, + AU1000_USB_DEV_SUS_INT, + AU1000_USB_HOST_INT, + AU1000_ACSYNC_INT, + AU1000_MAC0_DMA_INT, + AU1000_MAC1_DMA_INT, + AU1000_I2S_UO_INT, /* au1000 */ + AU1000_AC97C_INT, + AU1000_GPIO_0, + AU1000_GPIO_1, + AU1000_GPIO_2, + AU1000_GPIO_3, + AU1000_GPIO_4, + AU1000_GPIO_5, + AU1000_GPIO_6, + AU1000_GPIO_7, + AU1000_GPIO_8, + AU1000_GPIO_9, + AU1000_GPIO_10, + AU1000_GPIO_11, + AU1000_GPIO_12, + AU1000_GPIO_13, + AU1000_GPIO_14, + AU1000_GPIO_15, + AU1000_GPIO_16, + AU1000_GPIO_17, + AU1000_GPIO_18, + AU1000_GPIO_19, + AU1000_GPIO_20, + AU1000_GPIO_21, + AU1000_GPIO_22, + AU1000_GPIO_23, + AU1000_GPIO_24, + AU1000_GPIO_25, + AU1000_GPIO_26, + AU1000_GPIO_27, + AU1000_GPIO_28, + AU1000_GPIO_29, + AU1000_GPIO_30, + AU1000_GPIO_31, +}; + +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART2_ADDR 0xB1300000 +#define UART3_ADDR 0xB1400000 + +#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ +#define USB_HOST_CONFIG 0xB017FFFC + +#define AU1000_ETH0_BASE 0xB0500000 +#define AU1000_ETH1_BASE 0xB0510000 +#define AU1000_MAC0_ENABLE 0xB0520000 +#define AU1000_MAC1_ENABLE 0xB0520004 +#define NUM_ETH_INTERFACES 2 +#endif /* CONFIG_SOC_AU1000 */ + +/* Au1500 */ +#ifdef CONFIG_SOC_AU1500 +enum soc_au1500_ints { + AU1500_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, + AU1500_UART0_INT = AU1500_FIRST_INT, + AU1000_PCI_INTA, /* au1500 */ + AU1000_PCI_INTB, /* au1500 */ + AU1500_UART3_INT, + AU1000_PCI_INTC, /* au1500 */ + AU1000_PCI_INTD, /* au1500 */ + AU1000_DMA_INT_BASE, + + AU1000_TOY_INT = AU1500_FIRST_INT + 14, + AU1000_TOY_MATCH0_INT, + AU1000_TOY_MATCH1_INT, + AU1000_TOY_MATCH2_INT, + AU1000_RTC_INT, + AU1000_RTC_MATCH0_INT, + AU1000_RTC_MATCH1_INT, + AU1000_RTC_MATCH2_INT, + AU1500_PCI_ERR_INT, + AU1500_RESERVED_INT, + AU1000_USB_DEV_REQ_INT, + AU1000_USB_DEV_SUS_INT, + AU1000_USB_HOST_INT, + AU1000_ACSYNC_INT, + AU1500_MAC0_DMA_INT, + AU1500_MAC1_DMA_INT, + AU1000_AC97C_INT = AU1500_FIRST_INT + 31, + AU1000_GPIO_0, + AU1000_GPIO_1, + AU1000_GPIO_2, + AU1000_GPIO_3, + AU1000_GPIO_4, + AU1000_GPIO_5, + AU1000_GPIO_6, + AU1000_GPIO_7, + AU1000_GPIO_8, + AU1000_GPIO_9, + AU1000_GPIO_10, + AU1000_GPIO_11, + AU1000_GPIO_12, + AU1000_GPIO_13, + AU1000_GPIO_14, + AU1000_GPIO_15, + AU1500_GPIO_200, + AU1500_GPIO_201, + AU1500_GPIO_202, + AU1500_GPIO_203, + AU1500_GPIO_20, + AU1500_GPIO_204, + AU1500_GPIO_205, + AU1500_GPIO_23, + AU1500_GPIO_24, + AU1500_GPIO_25, + AU1500_GPIO_26, + AU1500_GPIO_27, + AU1500_GPIO_28, + AU1500_GPIO_206, + AU1500_GPIO_207, + AU1500_GPIO_208_215, +}; + +/* shortcuts */ +#define INTA AU1000_PCI_INTA +#define INTB AU1000_PCI_INTB +#define INTC AU1000_PCI_INTC +#define INTD AU1000_PCI_INTD + +#define UART0_ADDR 0xB1100000 +#define UART3_ADDR 0xB1400000 + +#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ +#define USB_HOST_CONFIG 0xB017fffc + +#define AU1500_ETH0_BASE 0xB1500000 +#define AU1500_ETH1_BASE 0xB1510000 +#define AU1500_MAC0_ENABLE 0xB1520000 +#define AU1500_MAC1_ENABLE 0xB1520004 +#define NUM_ETH_INTERFACES 2 +#endif /* CONFIG_SOC_AU1500 */ + +/* Au1100 */ +#ifdef CONFIG_SOC_AU1100 +enum soc_au1100_ints { + AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, + AU1100_UART0_INT, + AU1100_UART1_INT, + AU1100_SD_INT, + AU1100_UART3_INT, + AU1000_SSI0_INT, + AU1000_SSI1_INT, + AU1000_DMA_INT_BASE, + + AU1000_TOY_INT = AU1100_FIRST_INT + 14, + AU1000_TOY_MATCH0_INT, + AU1000_TOY_MATCH1_INT, + AU1000_TOY_MATCH2_INT, + AU1000_RTC_INT, + AU1000_RTC_MATCH0_INT, + AU1000_RTC_MATCH1_INT, + AU1000_RTC_MATCH2_INT, + AU1000_IRDA_TX_INT, + AU1000_IRDA_RX_INT, + AU1000_USB_DEV_REQ_INT, + AU1000_USB_DEV_SUS_INT, + AU1000_USB_HOST_INT, + AU1000_ACSYNC_INT, + AU1100_MAC0_DMA_INT, + AU1100_GPIO_208_215, + AU1100_LCD_INT, + AU1000_AC97C_INT, + AU1000_GPIO_0, + AU1000_GPIO_1, + AU1000_GPIO_2, + AU1000_GPIO_3, + AU1000_GPIO_4, + AU1000_GPIO_5, + AU1000_GPIO_6, + AU1000_GPIO_7, + AU1000_GPIO_8, + AU1000_GPIO_9, + AU1000_GPIO_10, + AU1000_GPIO_11, + AU1000_GPIO_12, + AU1000_GPIO_13, + AU1000_GPIO_14, + AU1000_GPIO_15, + AU1000_GPIO_16, + AU1000_GPIO_17, + AU1000_GPIO_18, + AU1000_GPIO_19, + AU1000_GPIO_20, + AU1000_GPIO_21, + AU1000_GPIO_22, + AU1000_GPIO_23, + AU1000_GPIO_24, + AU1000_GPIO_25, + AU1000_GPIO_26, + AU1000_GPIO_27, + AU1000_GPIO_28, + AU1000_GPIO_29, + AU1000_GPIO_30, + AU1000_GPIO_31, +}; + +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART3_ADDR 0xB1400000 + +#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ +#define USB_HOST_CONFIG 0xB017FFFC + +#define AU1100_ETH0_BASE 0xB0500000 +#define AU1100_MAC0_ENABLE 0xB0520000 +#define NUM_ETH_INTERFACES 1 +#endif /* CONFIG_SOC_AU1100 */ + +#ifdef CONFIG_SOC_AU1550 +enum soc_au1550_ints { + AU1550_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, + AU1550_UART0_INT = AU1550_FIRST_INT, + AU1550_PCI_INTA, + AU1550_PCI_INTB, + AU1550_DDMA_INT, + AU1550_CRYPTO_INT, + AU1550_PCI_INTC, + AU1550_PCI_INTD, + AU1550_PCI_RST_INT, + AU1550_UART1_INT, + AU1550_UART3_INT, + AU1550_PSC0_INT, + AU1550_PSC1_INT, + AU1550_PSC2_INT, + AU1550_PSC3_INT, + AU1000_TOY_INT, + AU1000_TOY_MATCH0_INT, + AU1000_TOY_MATCH1_INT, + AU1000_TOY_MATCH2_INT, + AU1000_RTC_INT, + AU1000_RTC_MATCH0_INT, + AU1000_RTC_MATCH1_INT, + AU1000_RTC_MATCH2_INT, + + AU1550_NAND_INT = AU1550_FIRST_INT + 23, + AU1550_USB_DEV_REQ_INT, + AU1000_USB_DEV_REQ_INT = AU1550_USB_DEV_REQ_INT, + AU1550_USB_DEV_SUS_INT, + AU1000_USB_DEV_SUS_INT = AU1550_USB_DEV_SUS_INT, + AU1550_USB_HOST_INT, + AU1000_USB_HOST_INT = AU1550_USB_HOST_INT, + AU1550_MAC0_DMA_INT, + AU1550_MAC1_DMA_INT, + AU1000_GPIO_0 = AU1550_FIRST_INT + 32, + AU1000_GPIO_1, + AU1000_GPIO_2, + AU1000_GPIO_3, + AU1000_GPIO_4, + AU1000_GPIO_5, + AU1000_GPIO_6, + AU1000_GPIO_7, + AU1000_GPIO_8, + AU1000_GPIO_9, + AU1000_GPIO_10, + AU1000_GPIO_11, + AU1000_GPIO_12, + AU1000_GPIO_13, + AU1000_GPIO_14, + AU1000_GPIO_15, + AU1550_GPIO_200, + AU1500_GPIO_201_205, /* Logical or of GPIO201:205 */ + AU1500_GPIO_16, + AU1500_GPIO_17, + AU1500_GPIO_20, + AU1500_GPIO_21, + AU1500_GPIO_22, + AU1500_GPIO_23, + AU1500_GPIO_24, + AU1500_GPIO_25, + AU1500_GPIO_26, + AU1500_GPIO_27, + AU1500_GPIO_28, + AU1500_GPIO_206, + AU1500_GPIO_207, + AU1500_GPIO_208_218, /* Logical or of GPIO208:218 */ +}; + +/* shortcuts */ +#define INTA AU1550_PCI_INTA +#define INTB AU1550_PCI_INTB +#define INTC AU1550_PCI_INTC +#define INTD AU1550_PCI_INTD + +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART3_ADDR 0xB1400000 + +#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */ +#define USB_OHCI_LEN 0x00060000 +#define USB_HOST_CONFIG 0xB4027ffc + +#define AU1550_ETH0_BASE 0xB0500000 +#define AU1550_ETH1_BASE 0xB0510000 +#define AU1550_MAC0_ENABLE 0xB0520000 +#define AU1550_MAC1_ENABLE 0xB0520004 +#define NUM_ETH_INTERFACES 2 +#endif /* CONFIG_SOC_AU1550 */ + +#ifdef CONFIG_SOC_AU1200 +enum soc_au1200_ints { + AU1200_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, + AU1200_UART0_INT = AU1200_FIRST_INT, + AU1200_SWT_INT, + AU1200_SD_INT, + AU1200_DDMA_INT, + AU1200_MAE_BE_INT, + AU1200_GPIO_200, + AU1200_GPIO_201, + AU1200_GPIO_202, + AU1200_UART1_INT, + AU1200_MAE_FE_INT, + AU1200_PSC0_INT, + AU1200_PSC1_INT, + AU1200_AES_INT, + AU1200_CAMERA_INT, + AU1000_TOY_INT, + AU1000_TOY_MATCH0_INT, + AU1000_TOY_MATCH1_INT, + AU1000_TOY_MATCH2_INT, + AU1000_RTC_INT, + AU1000_RTC_MATCH0_INT, + AU1000_RTC_MATCH1_INT, + AU1000_RTC_MATCH2_INT, + + AU1200_NAND_INT = AU1200_FIRST_INT + 23, + AU1200_GPIO_204, + AU1200_GPIO_205, + AU1200_GPIO_206, + AU1200_GPIO_207, + AU1200_GPIO_208_215, /* Logical OR of 208:215 */ + AU1200_USB_INT, + AU1000_USB_HOST_INT = AU1200_USB_INT, + AU1200_LCD_INT, + AU1200_MAE_BOTH_INT, + AU1000_GPIO_0, + AU1000_GPIO_1, + AU1000_GPIO_2, + AU1000_GPIO_3, + AU1000_GPIO_4, + AU1000_GPIO_5, + AU1000_GPIO_6, + AU1000_GPIO_7, + AU1000_GPIO_8, + AU1000_GPIO_9, + AU1000_GPIO_10, + AU1000_GPIO_11, + AU1000_GPIO_12, + AU1000_GPIO_13, + AU1000_GPIO_14, + AU1000_GPIO_15, + AU1000_GPIO_16, + AU1000_GPIO_17, + AU1000_GPIO_18, + AU1000_GPIO_19, + AU1000_GPIO_20, + AU1000_GPIO_21, + AU1000_GPIO_22, + AU1000_GPIO_23, + AU1000_GPIO_24, + AU1000_GPIO_25, + AU1000_GPIO_26, + AU1000_GPIO_27, + AU1000_GPIO_28, + AU1000_GPIO_29, + AU1000_GPIO_30, + AU1000_GPIO_31, +}; + +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 + +#define USB_UOC_BASE 0x14020020 +#define USB_UOC_LEN 0x20 +#define USB_OHCI_BASE 0x14020100 +#define USB_OHCI_LEN 0x100 +#define USB_EHCI_BASE 0x14020200 +#define USB_EHCI_LEN 0x100 +#define USB_UDC_BASE 0x14022000 +#define USB_UDC_LEN 0x2000 +#define USB_MSR_BASE 0xB4020000 +#define USB_MSR_MCFG 4 +#define USBMSRMCFG_OMEMEN 0 +#define USBMSRMCFG_OBMEN 1 +#define USBMSRMCFG_EMEMEN 2 +#define USBMSRMCFG_EBMEN 3 +#define USBMSRMCFG_DMEMEN 4 +#define USBMSRMCFG_DBMEN 5 +#define USBMSRMCFG_GMEMEN 6 +#define USBMSRMCFG_OHCCLKEN 16 +#define USBMSRMCFG_EHCCLKEN 17 +#define USBMSRMCFG_UDCCLKEN 18 +#define USBMSRMCFG_PHYPLLEN 19 +#define USBMSRMCFG_RDCOMB 30 +#define USBMSRMCFG_PFEN 31 + +#endif /* CONFIG_SOC_AU1200 */ + +#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8) +#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31) +#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_BASE + 32) +#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31) + +#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST +#define INTX 0xFF /* not valid */ + +/* Programmable Counters 0 and 1 */ +#define SYS_BASE 0xB1900000 +#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) +# define SYS_CNTRL_E1S (1 << 23) +# define SYS_CNTRL_T1S (1 << 20) +# define SYS_CNTRL_M21 (1 << 19) +# define SYS_CNTRL_M11 (1 << 18) +# define SYS_CNTRL_M01 (1 << 17) +# define SYS_CNTRL_C1S (1 << 16) +# define SYS_CNTRL_BP (1 << 14) +# define SYS_CNTRL_EN1 (1 << 13) +# define SYS_CNTRL_BT1 (1 << 12) +# define SYS_CNTRL_EN0 (1 << 11) +# define SYS_CNTRL_BT0 (1 << 10) +# define SYS_CNTRL_E0 (1 << 8) +# define SYS_CNTRL_E0S (1 << 7) +# define SYS_CNTRL_32S (1 << 5) +# define SYS_CNTRL_T0S (1 << 4) +# define SYS_CNTRL_M20 (1 << 3) +# define SYS_CNTRL_M10 (1 << 2) +# define SYS_CNTRL_M00 (1 << 1) +# define SYS_CNTRL_C0S (1 << 0) + +/* Programmable Counter 0 Registers */ +#define SYS_TOYTRIM (SYS_BASE + 0) +#define SYS_TOYWRITE (SYS_BASE + 4) +#define SYS_TOYMATCH0 (SYS_BASE + 8) +#define SYS_TOYMATCH1 (SYS_BASE + 0xC) +#define SYS_TOYMATCH2 (SYS_BASE + 0x10) +#define SYS_TOYREAD (SYS_BASE + 0x40) + +/* Programmable Counter 1 Registers */ +#define SYS_RTCTRIM (SYS_BASE + 0x44) +#define SYS_RTCWRITE (SYS_BASE + 0x48) +#define SYS_RTCMATCH0 (SYS_BASE + 0x4C) +#define SYS_RTCMATCH1 (SYS_BASE + 0x50) +#define SYS_RTCMATCH2 (SYS_BASE + 0x54) +#define SYS_RTCREAD (SYS_BASE + 0x58) + +/* I2S Controller */ +#define I2S_DATA 0xB1000000 +# define I2S_DATA_MASK 0xffffff +#define I2S_CONFIG 0xB1000004 +# define I2S_CONFIG_XU (1 << 25) +# define I2S_CONFIG_XO (1 << 24) +# define I2S_CONFIG_RU (1 << 23) +# define I2S_CONFIG_RO (1 << 22) +# define I2S_CONFIG_TR (1 << 21) +# define I2S_CONFIG_TE (1 << 20) +# define I2S_CONFIG_TF (1 << 19) +# define I2S_CONFIG_RR (1 << 18) +# define I2S_CONFIG_RE (1 << 17) +# define I2S_CONFIG_RF (1 << 16) +# define I2S_CONFIG_PD (1 << 11) +# define I2S_CONFIG_LB (1 << 10) +# define I2S_CONFIG_IC (1 << 9) +# define I2S_CONFIG_FM_BIT 7 +# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_TN (1 << 6) +# define I2S_CONFIG_RN (1 << 5) +# define I2S_CONFIG_SZ_BIT 0 +# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) + +#define I2S_CONTROL 0xB1000008 +# define I2S_CONTROL_D (1 << 1) +# define I2S_CONTROL_CE (1 << 0) + +/* USB Host Controller */ +#ifndef USB_OHCI_LEN +#define USB_OHCI_LEN 0x00100000 +#endif + +#ifndef CONFIG_SOC_AU1200 + +/* USB Device Controller */ +#define USBD_EP0RD 0xB0200000 +#define USBD_EP0WR 0xB0200004 +#define USBD_EP2WR 0xB0200008 +#define USBD_EP3WR 0xB020000C +#define USBD_EP4RD 0xB0200010 +#define USBD_EP5RD 0xB0200014 +#define USBD_INTEN 0xB0200018 +#define USBD_INTSTAT 0xB020001C +# define USBDEV_INT_SOF (1 << 12) +# define USBDEV_INT_HF_BIT 6 +# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) +# define USBDEV_INT_CMPLT_BIT 0 +# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) +#define USBD_CONFIG 0xB0200020 +#define USBD_EP0CS 0xB0200024 +#define USBD_EP2CS 0xB0200028 +#define USBD_EP3CS 0xB020002C +#define USBD_EP4CS 0xB0200030 +#define USBD_EP5CS 0xB0200034 +# define USBDEV_CS_SU (1 << 14) +# define USBDEV_CS_NAK (1 << 13) +# define USBDEV_CS_ACK (1 << 12) +# define USBDEV_CS_BUSY (1 << 11) +# define USBDEV_CS_TSIZE_BIT 1 +# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) +# define USBDEV_CS_STALL (1 << 0) +#define USBD_EP0RDSTAT 0xB0200040 +#define USBD_EP0WRSTAT 0xB0200044 +#define USBD_EP2WRSTAT 0xB0200048 +#define USBD_EP3WRSTAT 0xB020004C +#define USBD_EP4RDSTAT 0xB0200050 +#define USBD_EP5RDSTAT 0xB0200054 +# define USBDEV_FSTAT_FLUSH (1 << 6) +# define USBDEV_FSTAT_UF (1 << 5) +# define USBDEV_FSTAT_OF (1 << 4) +# define USBDEV_FSTAT_FCNT_BIT 0 +# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) +#define USBD_ENABLE 0xB0200058 +# define USBDEV_ENABLE (1 << 1) +# define USBDEV_CE (1 << 0) + +#endif /* !CONFIG_SOC_AU1200 */ + +/* Ethernet Controllers */ + +/* 4 byte offsets from AU1000_ETH_BASE */ +#define MAC_CONTROL 0x0 +# define MAC_RX_ENABLE (1 << 2) +# define MAC_TX_ENABLE (1 << 3) +# define MAC_DEF_CHECK (1 << 5) +# define MAC_SET_BL(X) (((X) & 0x3) << 6) +# define MAC_AUTO_PAD (1 << 8) +# define MAC_DISABLE_RETRY (1 << 10) +# define MAC_DISABLE_BCAST (1 << 11) +# define MAC_LATE_COL (1 << 12) +# define MAC_HASH_MODE (1 << 13) +# define MAC_HASH_ONLY (1 << 15) +# define MAC_PASS_ALL (1 << 16) +# define MAC_INVERSE_FILTER (1 << 17) +# define MAC_PROMISCUOUS (1 << 18) +# define MAC_PASS_ALL_MULTI (1 << 19) +# define MAC_FULL_DUPLEX (1 << 20) +# define MAC_NORMAL_MODE 0 +# define MAC_INT_LOOPBACK (1 << 21) +# define MAC_EXT_LOOPBACK (1 << 22) +# define MAC_DISABLE_RX_OWN (1 << 23) +# define MAC_BIG_ENDIAN (1 << 30) +# define MAC_RX_ALL (1 << 31) +#define MAC_ADDRESS_HIGH 0x4 +#define MAC_ADDRESS_LOW 0x8 +#define MAC_MCAST_HIGH 0xC +#define MAC_MCAST_LOW 0x10 +#define MAC_MII_CNTRL 0x14 +# define MAC_MII_BUSY (1 << 0) +# define MAC_MII_READ 0 +# define MAC_MII_WRITE (1 << 1) +# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6) +# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11) +#define MAC_MII_DATA 0x18 +#define MAC_FLOW_CNTRL 0x1C +# define MAC_FLOW_CNTRL_BUSY (1 << 0) +# define MAC_FLOW_CNTRL_ENABLE (1 << 1) +# define MAC_PASS_CONTROL (1 << 2) +# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16) +#define MAC_VLAN1_TAG 0x20 +#define MAC_VLAN2_TAG 0x24 + +/* Ethernet Controller Enable */ + +# define MAC_EN_CLOCK_ENABLE (1 << 0) +# define MAC_EN_RESET0 (1 << 1) +# define MAC_EN_TOSS (0 << 2) +# define MAC_EN_CACHEABLE (1 << 3) +# define MAC_EN_RESET1 (1 << 4) +# define MAC_EN_RESET2 (1 << 5) +# define MAC_DMA_RESET (1 << 6) + +/* Ethernet Controller DMA Channels */ + +#define MAC0_TX_DMA_ADDR 0xB4004000 +#define MAC1_TX_DMA_ADDR 0xB4004200 +/* offsets from MAC_TX_RING_ADDR address */ +#define MAC_TX_BUFF0_STATUS 0x0 +# define TX_FRAME_ABORTED (1 << 0) +# define TX_JAB_TIMEOUT (1 << 1) +# define TX_NO_CARRIER (1 << 2) +# define TX_LOSS_CARRIER (1 << 3) +# define TX_EXC_DEF (1 << 4) +# define TX_LATE_COLL_ABORT (1 << 5) +# define TX_EXC_COLL (1 << 6) +# define TX_UNDERRUN (1 << 7) +# define TX_DEFERRED (1 << 8) +# define TX_LATE_COLL (1 << 9) +# define TX_COLL_CNT_MASK (0xF << 10) +# define TX_PKT_RETRY (1 << 31) +#define MAC_TX_BUFF0_ADDR 0x4 +# define TX_DMA_ENABLE (1 << 0) +# define TX_T_DONE (1 << 1) +# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) +#define MAC_TX_BUFF0_LEN 0x8 +#define MAC_TX_BUFF1_STATUS 0x10 +#define MAC_TX_BUFF1_ADDR 0x14 +#define MAC_TX_BUFF1_LEN 0x18 +#define MAC_TX_BUFF2_STATUS 0x20 +#define MAC_TX_BUFF2_ADDR 0x24 +#define MAC_TX_BUFF2_LEN 0x28 +#define MAC_TX_BUFF3_STATUS 0x30 +#define MAC_TX_BUFF3_ADDR 0x34 +#define MAC_TX_BUFF3_LEN 0x38 + +#define MAC0_RX_DMA_ADDR 0xB4004100 +#define MAC1_RX_DMA_ADDR 0xB4004300 +/* offsets from MAC_RX_RING_ADDR */ +#define MAC_RX_BUFF0_STATUS 0x0 +# define RX_FRAME_LEN_MASK 0x3fff +# define RX_WDOG_TIMER (1 << 14) +# define RX_RUNT (1 << 15) +# define RX_OVERLEN (1 << 16) +# define RX_COLL (1 << 17) +# define RX_ETHER (1 << 18) +# define RX_MII_ERROR (1 << 19) +# define RX_DRIBBLING (1 << 20) +# define RX_CRC_ERROR (1 << 21) +# define RX_VLAN1 (1 << 22) +# define RX_VLAN2 (1 << 23) +# define RX_LEN_ERROR (1 << 24) +# define RX_CNTRL_FRAME (1 << 25) +# define RX_U_CNTRL_FRAME (1 << 26) +# define RX_MCAST_FRAME (1 << 27) +# define RX_BCAST_FRAME (1 << 28) +# define RX_FILTER_FAIL (1 << 29) +# define RX_PACKET_FILTER (1 << 30) +# define RX_MISSED_FRAME (1 << 31) + +# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ + RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ + RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) +#define MAC_RX_BUFF0_ADDR 0x4 +# define RX_DMA_ENABLE (1 << 0) +# define RX_T_DONE (1 << 1) +# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) +# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0) +#define MAC_RX_BUFF1_STATUS 0x10 +#define MAC_RX_BUFF1_ADDR 0x14 +#define MAC_RX_BUFF2_STATUS 0x20 +#define MAC_RX_BUFF2_ADDR 0x24 +#define MAC_RX_BUFF3_STATUS 0x30 +#define MAC_RX_BUFF3_ADDR 0x34 + +/* UARTS 0-3 */ +#define UART_BASE UART0_ADDR +#ifdef CONFIG_SOC_AU1200 +#define UART_DEBUG_BASE UART1_ADDR +#else +#define UART_DEBUG_BASE UART3_ADDR +#endif + +#define UART_RX 0 /* Receive buffer */ +#define UART_TX 4 /* Transmit buffer */ +#define UART_IER 8 /* Interrupt Enable Register */ +#define UART_IIR 0xC /* Interrupt ID Register */ +#define UART_FCR 0x10 /* FIFO Control Register */ +#define UART_LCR 0x14 /* Line Control Register */ +#define UART_MCR 0x18 /* Modem Control Register */ +#define UART_LSR 0x1C /* Line Status Register */ +#define UART_MSR 0x20 /* Modem Status Register */ +#define UART_CLK 0x28 /* Baud Rate Clock Divider */ +#define UART_MOD_CNTRL 0x100 /* Module Control */ + +#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ +#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ +#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ +#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ +#define UART_FCR_TRIGGER_MASK 0xF0 /* Mask for the FIFO trigger range */ +#define UART_FCR_R_TRIGGER_1 0x00 /* Mask for receive trigger set at 1 */ +#define UART_FCR_R_TRIGGER_4 0x40 /* Mask for receive trigger set at 4 */ +#define UART_FCR_R_TRIGGER_8 0x80 /* Mask for receive trigger set at 8 */ +#define UART_FCR_R_TRIGGER_14 0xA0 /* Mask for receive trigger set at 14 */ +#define UART_FCR_T_TRIGGER_0 0x00 /* Mask for transmit trigger set at 0 */ +#define UART_FCR_T_TRIGGER_4 0x10 /* Mask for transmit trigger set at 4 */ +#define UART_FCR_T_TRIGGER_8 0x20 /* Mask for transmit trigger set at 8 */ +#define UART_FCR_T_TRIGGER_12 0x30 /* Mask for transmit trigger set at 12 */ + +/* + * These are the definitions for the Line Control Register + */ +#define UART_LCR_SBC 0x40 /* Set break control */ +#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ +#define UART_LCR_EPAR 0x10 /* Even parity select */ +#define UART_LCR_PARITY 0x08 /* Parity Enable */ +#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ +#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ +#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ +#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ +#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ + +/* + * These are the definitions for the Line Status Register + */ +#define UART_LSR_TEMT 0x40 /* Transmitter empty */ +#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ +#define UART_LSR_BI 0x10 /* Break interrupt indicator */ +#define UART_LSR_FE 0x08 /* Frame error indicator */ +#define UART_LSR_PE 0x04 /* Parity error indicator */ +#define UART_LSR_OE 0x02 /* Overrun error indicator */ +#define UART_LSR_DR 0x01 /* Receiver data ready */ + +/* + * These are the definitions for the Interrupt Identification Register + */ +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +/* + * These are the definitions for the Interrupt Enable Register + */ +#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ + +/* + * These are the definitions for the Modem Control Register + */ +#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ +#define UART_MCR_OUT2 0x08 /* Out2 complement */ +#define UART_MCR_OUT1 0x04 /* Out1 complement */ +#define UART_MCR_RTS 0x02 /* RTS complement */ +#define UART_MCR_DTR 0x01 /* DTR complement */ + +/* + * These are the definitions for the Modem Status Register + */ +#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ +#define UART_MSR_RI 0x40 /* Ring Indicator */ +#define UART_MSR_DSR 0x20 /* Data Set Ready */ +#define UART_MSR_CTS 0x10 /* Clear to Send */ +#define UART_MSR_DDCD 0x08 /* Delta DCD */ +#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ +#define UART_MSR_DDSR 0x02 /* Delta DSR */ +#define UART_MSR_DCTS 0x01 /* Delta CTS */ +#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ + +/* SSIO */ +#define SSI0_STATUS 0xB1600000 +# define SSI_STATUS_BF (1 << 4) +# define SSI_STATUS_OF (1 << 3) +# define SSI_STATUS_UF (1 << 2) +# define SSI_STATUS_D (1 << 1) +# define SSI_STATUS_B (1 << 0) +#define SSI0_INT 0xB1600004 +# define SSI_INT_OI (1 << 3) +# define SSI_INT_UI (1 << 2) +# define SSI_INT_DI (1 << 1) +#define SSI0_INT_ENABLE 0xB1600008 +# define SSI_INTE_OIE (1 << 3) +# define SSI_INTE_UIE (1 << 2) +# define SSI_INTE_DIE (1 << 1) +#define SSI0_CONFIG 0xB1600020 +# define SSI_CONFIG_AO (1 << 24) +# define SSI_CONFIG_DO (1 << 23) +# define SSI_CONFIG_ALEN_BIT 20 +# define SSI_CONFIG_ALEN_MASK (0x7 << 20) +# define SSI_CONFIG_DLEN_BIT 16 +# define SSI_CONFIG_DLEN_MASK (0x7 << 16) +# define SSI_CONFIG_DD (1 << 11) +# define SSI_CONFIG_AD (1 << 10) +# define SSI_CONFIG_BM_BIT 8 +# define SSI_CONFIG_BM_MASK (0x3 << 8) +# define SSI_CONFIG_CE (1 << 7) +# define SSI_CONFIG_DP (1 << 6) +# define SSI_CONFIG_DL (1 << 5) +# define SSI_CONFIG_EP (1 << 4) +#define SSI0_ADATA 0xB1600024 +# define SSI_AD_D (1 << 24) +# define SSI_AD_ADDR_BIT 16 +# define SSI_AD_ADDR_MASK (0xff << 16) +# define SSI_AD_DATA_BIT 0 +# define SSI_AD_DATA_MASK (0xfff << 0) +#define SSI0_CLKDIV 0xB1600028 +#define SSI0_CONTROL 0xB1600100 +# define SSI_CONTROL_CD (1 << 1) +# define SSI_CONTROL_E (1 << 0) + +/* SSI1 */ +#define SSI1_STATUS 0xB1680000 +#define SSI1_INT 0xB1680004 +#define SSI1_INT_ENABLE 0xB1680008 +#define SSI1_CONFIG 0xB1680020 +#define SSI1_ADATA 0xB1680024 +#define SSI1_CLKDIV 0xB1680028 +#define SSI1_ENABLE 0xB1680100 + +/* + * Register content definitions + */ +#define SSI_STATUS_BF (1 << 4) +#define SSI_STATUS_OF (1 << 3) +#define SSI_STATUS_UF (1 << 2) +#define SSI_STATUS_D (1 << 1) +#define SSI_STATUS_B (1 << 0) + +/* SSI_INT */ +#define SSI_INT_OI (1 << 3) +#define SSI_INT_UI (1 << 2) +#define SSI_INT_DI (1 << 1) + +/* SSI_INTEN */ +#define SSI_INTEN_OIE (1 << 3) +#define SSI_INTEN_UIE (1 << 2) +#define SSI_INTEN_DIE (1 << 1) + +#define SSI_CONFIG_AO (1 << 24) +#define SSI_CONFIG_DO (1 << 23) +#define SSI_CONFIG_ALEN (7 << 20) +#define SSI_CONFIG_DLEN (15 << 16) +#define SSI_CONFIG_DD (1 << 11) +#define SSI_CONFIG_AD (1 << 10) +#define SSI_CONFIG_BM (3 << 8) +#define SSI_CONFIG_CE (1 << 7) +#define SSI_CONFIG_DP (1 << 6) +#define SSI_CONFIG_DL (1 << 5) +#define SSI_CONFIG_EP (1 << 4) +#define SSI_CONFIG_ALEN_N(N) ((N-1) << 20) +#define SSI_CONFIG_DLEN_N(N) ((N-1) << 16) +#define SSI_CONFIG_BM_HI (0 << 8) +#define SSI_CONFIG_BM_LO (1 << 8) +#define SSI_CONFIG_BM_CY (2 << 8) + +#define SSI_ADATA_D (1 << 24) +#define SSI_ADATA_ADDR (0xFF << 16) +#define SSI_ADATA_DATA 0x0FFF +#define SSI_ADATA_ADDR_N(N) (N << 16) + +#define SSI_ENABLE_CD (1 << 1) +#define SSI_ENABLE_E (1 << 0) + +/* IrDA Controller */ +#define IRDA_BASE 0xB0300000 +#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00) +#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04) +#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08) +#define IR_RING_SIZE (IRDA_BASE + 0x0C) +#define IR_RING_PROMPT (IRDA_BASE + 0x10) +#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14) +#define IR_INT_CLEAR (IRDA_BASE + 0x18) +#define IR_CONFIG_1 (IRDA_BASE + 0x20) +# define IR_RX_INVERT_LED (1 << 0) +# define IR_TX_INVERT_LED (1 << 1) +# define IR_ST (1 << 2) +# define IR_SF (1 << 3) +# define IR_SIR (1 << 4) +# define IR_MIR (1 << 5) +# define IR_FIR (1 << 6) +# define IR_16CRC (1 << 7) +# define IR_TD (1 << 8) +# define IR_RX_ALL (1 << 9) +# define IR_DMA_ENABLE (1 << 10) +# define IR_RX_ENABLE (1 << 11) +# define IR_TX_ENABLE (1 << 12) +# define IR_LOOPBACK (1 << 14) +# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ + IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) +#define IR_SIR_FLAGS (IRDA_BASE + 0x24) +#define IR_ENABLE (IRDA_BASE + 0x28) +# define IR_RX_STATUS (1 << 9) +# define IR_TX_STATUS (1 << 10) +#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C) +#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30) +#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34) +#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38) +#define IR_CONFIG_2 (IRDA_BASE + 0x3C) +# define IR_MODE_INV (1 << 0) +# define IR_ONE_PIN (1 << 1) +#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40) + +/* GPIO */ +#define SYS_PINFUNC 0xB190002C +# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */ +# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */ +# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */ +# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */ +# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */ +# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */ +# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */ +# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */ +# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */ +# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */ +# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */ +# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */ +# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */ +# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */ +# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */ +# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */ + +/* Au1100 only */ +# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */ +# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */ +# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */ +# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */ + +/* Au1550 only. Redefines lots of pins */ +# define SYS_PF_PSC2_MASK (7 << 17) +# define SYS_PF_PSC2_AC97 0 +# define SYS_PF_PSC2_SPI 0 +# define SYS_PF_PSC2_I2S (1 << 17) +# define SYS_PF_PSC2_SMBUS (3 << 17) +# define SYS_PF_PSC2_GPIO (7 << 17) +# define SYS_PF_PSC3_MASK (7 << 20) +# define SYS_PF_PSC3_AC97 0 +# define SYS_PF_PSC3_SPI 0 +# define SYS_PF_PSC3_I2S (1 << 20) +# define SYS_PF_PSC3_SMBUS (3 << 20) +# define SYS_PF_PSC3_GPIO (7 << 20) +# define SYS_PF_PSC1_S1 (1 << 1) +# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) + +/* Au1200 only */ +#ifdef CONFIG_SOC_AU1200 +#define SYS_PINFUNC_DMA (1 << 31) +#define SYS_PINFUNC_S0A (1 << 30) +#define SYS_PINFUNC_S1A (1 << 29) +#define SYS_PINFUNC_LP0 (1 << 28) +#define SYS_PINFUNC_LP1 (1 << 27) +#define SYS_PINFUNC_LD16 (1 << 26) +#define SYS_PINFUNC_LD8 (1 << 25) +#define SYS_PINFUNC_LD1 (1 << 24) +#define SYS_PINFUNC_LD0 (1 << 23) +#define SYS_PINFUNC_P1A (3 << 21) +#define SYS_PINFUNC_P1B (1 << 20) +#define SYS_PINFUNC_FS3 (1 << 19) +#define SYS_PINFUNC_P0A (3 << 17) +#define SYS_PINFUNC_CS (1 << 16) +#define SYS_PINFUNC_CIM (1 << 15) +#define SYS_PINFUNC_P1C (1 << 14) +#define SYS_PINFUNC_U1T (1 << 12) +#define SYS_PINFUNC_U1R (1 << 11) +#define SYS_PINFUNC_EX1 (1 << 10) +#define SYS_PINFUNC_EX0 (1 << 9) +#define SYS_PINFUNC_U0R (1 << 8) +#define SYS_PINFUNC_MC (1 << 7) +#define SYS_PINFUNC_S0B (1 << 6) +#define SYS_PINFUNC_S0C (1 << 5) +#define SYS_PINFUNC_P0B (1 << 4) +#define SYS_PINFUNC_U0T (1 << 3) +#define SYS_PINFUNC_S1B (1 << 2) +#endif + +#define SYS_TRIOUTRD 0xB1900100 +#define SYS_TRIOUTCLR 0xB1900100 +#define SYS_OUTPUTRD 0xB1900108 +#define SYS_OUTPUTSET 0xB1900108 +#define SYS_OUTPUTCLR 0xB190010C +#define SYS_PINSTATERD 0xB1900110 +#define SYS_PININPUTEN 0xB1900110 + +/* GPIO2, Au1500, Au1550 only */ +#define GPIO2_BASE 0xB1700000 +#define GPIO2_DIR (GPIO2_BASE + 0) +#define GPIO2_OUTPUT (GPIO2_BASE + 8) +#define GPIO2_PINSTATE (GPIO2_BASE + 0xC) +#define GPIO2_INTENABLE (GPIO2_BASE + 0x10) +#define GPIO2_ENABLE (GPIO2_BASE + 0x14) + +/* Power Management */ +#define SYS_SCRATCH0 0xB1900018 +#define SYS_SCRATCH1 0xB190001C +#define SYS_WAKEMSK 0xB1900034 +#define SYS_ENDIAN 0xB1900038 +#define SYS_POWERCTRL 0xB190003C +#define SYS_WAKESRC 0xB190005C +#define SYS_SLPPWR 0xB1900078 +#define SYS_SLEEP 0xB190007C + +/* Clock Controller */ +#define SYS_FREQCTRL0 0xB1900020 +# define SYS_FC_FRDIV2_BIT 22 +# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT) +# define SYS_FC_FE2 (1 << 21) +# define SYS_FC_FS2 (1 << 20) +# define SYS_FC_FRDIV1_BIT 12 +# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT) +# define SYS_FC_FE1 (1 << 11) +# define SYS_FC_FS1 (1 << 10) +# define SYS_FC_FRDIV0_BIT 2 +# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT) +# define SYS_FC_FE0 (1 << 1) +# define SYS_FC_FS0 (1 << 0) +#define SYS_FREQCTRL1 0xB1900024 +# define SYS_FC_FRDIV5_BIT 22 +# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT) +# define SYS_FC_FE5 (1 << 21) +# define SYS_FC_FS5 (1 << 20) +# define SYS_FC_FRDIV4_BIT 12 +# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT) +# define SYS_FC_FE4 (1 << 11) +# define SYS_FC_FS4 (1 << 10) +# define SYS_FC_FRDIV3_BIT 2 +# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT) +# define SYS_FC_FE3 (1 << 1) +# define SYS_FC_FS3 (1 << 0) +#define SYS_CLKSRC 0xB1900028 +# define SYS_CS_ME1_BIT 27 +# define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT) +# define SYS_CS_DE1 (1 << 26) +# define SYS_CS_CE1 (1 << 25) +# define SYS_CS_ME0_BIT 22 +# define SYS_CS_ME0_MASK (0x7 << SYS_CS_ME0_BIT) +# define SYS_CS_DE0 (1 << 21) +# define SYS_CS_CE0 (1 << 20) +# define SYS_CS_MI2_BIT 17 +# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT) +# define SYS_CS_DI2 (1 << 16) +# define SYS_CS_CI2 (1 << 15) +#ifdef CONFIG_SOC_AU1100 +# define SYS_CS_ML_BIT 7 +# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT) +# define SYS_CS_DL (1 << 6) +# define SYS_CS_CL (1 << 5) +#else +# define SYS_CS_MUH_BIT 12 +# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT) +# define SYS_CS_DUH (1 << 11) +# define SYS_CS_CUH (1 << 10) +# define SYS_CS_MUD_BIT 7 +# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT) +# define SYS_CS_DUD (1 << 6) +# define SYS_CS_CUD (1 << 5) +#endif +# define SYS_CS_MIR_BIT 2 +# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT) +# define SYS_CS_DIR (1 << 1) +# define SYS_CS_CIR (1 << 0) + +# define SYS_CS_MUX_AUX 0x1 +# define SYS_CS_MUX_FQ0 0x2 +# define SYS_CS_MUX_FQ1 0x3 +# define SYS_CS_MUX_FQ2 0x4 +# define SYS_CS_MUX_FQ3 0x5 +# define SYS_CS_MUX_FQ4 0x6 +# define SYS_CS_MUX_FQ5 0x7 +#define SYS_CPUPLL 0xB1900060 +#define SYS_AUXPLL 0xB1900064 + +/* AC97 Controller */ +#define AC97C_CONFIG 0xB0000000 +# define AC97C_RECV_SLOTS_BIT 13 +# define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT) +# define AC97C_XMIT_SLOTS_BIT 3 +# define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT) +# define AC97C_SG (1 << 2) +# define AC97C_SYNC (1 << 1) +# define AC97C_RESET (1 << 0) +#define AC97C_STATUS 0xB0000004 +# define AC97C_XU (1 << 11) +# define AC97C_XO (1 << 10) +# define AC97C_RU (1 << 9) +# define AC97C_RO (1 << 8) +# define AC97C_READY (1 << 7) +# define AC97C_CP (1 << 6) +# define AC97C_TR (1 << 5) +# define AC97C_TE (1 << 4) +# define AC97C_TF (1 << 3) +# define AC97C_RR (1 << 2) +# define AC97C_RE (1 << 1) +# define AC97C_RF (1 << 0) +#define AC97C_DATA 0xB0000008 +#define AC97C_CMD 0xB000000C +# define AC97C_WD_BIT 16 +# define AC97C_READ (1 << 7) +# define AC97C_INDEX_MASK 0x7f +#define AC97C_CNTRL 0xB0000010 +# define AC97C_RS (1 << 1) +# define AC97C_CE (1 << 0) + +/* Secure Digital (SD) Controller */ +#define SD0_XMIT_FIFO 0xB0600000 +#define SD0_RECV_FIFO 0xB0600004 +#define SD1_XMIT_FIFO 0xB0680000 +#define SD1_RECV_FIFO 0xB0680004 + +#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) +/* Au1500 PCI Controller */ +#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */ +#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) +#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) +# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \ + (1 << 25) | (1 << 26) | (1 << 27)) +#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) +#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) +#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) +#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) +#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18) +#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) +#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) +#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) +#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) +#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) +#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) +#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) + +#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */ + +/* + * All of our structures, like PCI resource, have 32-bit members. + * Drivers are expected to do an ioremap on the PCI MEM resource, but it's + * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch + * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and + * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM + * addresses. For PCI I/O, it's simpler because we get to do the ioremap + * ourselves and then adjust the device's resources. + */ +#define Au1500_EXT_CFG 0x600000000ULL +#define Au1500_EXT_CFG_TYPE1 0x680000000ULL +#define Au1500_PCI_IO_START 0x500000000ULL +#define Au1500_PCI_IO_END 0x5000FFFFFULL +#define Au1500_PCI_MEM_START 0x440000000ULL +#define Au1500_PCI_MEM_END 0x44FFFFFFFULL + +#define PCI_IO_START 0x00001000 +#define PCI_IO_END 0x000FFFFF +#define PCI_MEM_START 0x40000000 +#define PCI_MEM_END 0x4FFFFFFF + +#define PCI_FIRST_DEVFN (0 << 3) +#define PCI_LAST_DEVFN (19 << 3) + +#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ +#define IOPORT_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_START 0x10000000 +#define IOMEM_RESOURCE_END 0xffffffff + +#else /* Au1000 and Au1100 and Au1200 */ + +/* Don't allow any legacy ports probing */ +#define IOPORT_RESOURCE_START 0x10000000 +#define IOPORT_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_START 0x10000000 +#define IOMEM_RESOURCE_END 0xffffffff + +#define PCI_IO_START 0 +#define PCI_IO_END 0 +#define PCI_MEM_START 0 +#define PCI_MEM_END 0 +#define PCI_FIRST_DEVFN 0 +#define PCI_LAST_DEVFN 0 + +#endif + +#ifndef _LANGUAGE_ASSEMBLY +typedef volatile struct { + /* 0x0000 */ u32 toytrim; + /* 0x0004 */ u32 toywrite; + /* 0x0008 */ u32 toymatch0; + /* 0x000C */ u32 toymatch1; + /* 0x0010 */ u32 toymatch2; + /* 0x0014 */ u32 cntrctrl; + /* 0x0018 */ u32 scratch0; + /* 0x001C */ u32 scratch1; + /* 0x0020 */ u32 freqctrl0; + /* 0x0024 */ u32 freqctrl1; + /* 0x0028 */ u32 clksrc; + /* 0x002C */ u32 pinfunc; + /* 0x0030 */ u32 reserved0; + /* 0x0034 */ u32 wakemsk; + /* 0x0038 */ u32 endian; + /* 0x003C */ u32 powerctrl; + /* 0x0040 */ u32 toyread; + /* 0x0044 */ u32 rtctrim; + /* 0x0048 */ u32 rtcwrite; + /* 0x004C */ u32 rtcmatch0; + /* 0x0050 */ u32 rtcmatch1; + /* 0x0054 */ u32 rtcmatch2; + /* 0x0058 */ u32 rtcread; + /* 0x005C */ u32 wakesrc; + /* 0x0060 */ u32 cpupll; + /* 0x0064 */ u32 auxpll; + /* 0x0068 */ u32 reserved1; + /* 0x006C */ u32 reserved2; + /* 0x0070 */ u32 reserved3; + /* 0x0074 */ u32 reserved4; + /* 0x0078 */ u32 slppwr; + /* 0x007C */ u32 sleep; + /* 0x0080 */ u32 reserved5[32]; + /* 0x0100 */ u32 trioutrd; +#define trioutclr trioutrd + /* 0x0104 */ u32 reserved6; + /* 0x0108 */ u32 outputrd; +#define outputset outputrd + /* 0x010C */ u32 outputclr; + /* 0x0110 */ u32 pinstaterd; +#define pininputen pinstaterd +} AU1X00_SYS; + +static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE; + +#endif + +/* + * Processor information based on PRID. + * Copied from PowerPC. + */ +#ifndef _LANGUAGE_ASSEMBLY +struct cpu_spec { + /* CPU is matched via (PRID & prid_mask) == prid_value */ + unsigned int prid_mask; + unsigned int prid_value; + + char *cpu_name; + unsigned char cpu_od; /* Set Config[OD] */ + unsigned char cpu_bclk; /* Enable BCLK switching */ + unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */ +}; + +extern struct cpu_spec cpu_specs[]; +extern struct cpu_spec *cur_cpu_spec[]; +#endif + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h new file mode 100644 index 000000000000..c333b4e1cd44 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h @@ -0,0 +1,458 @@ +/* + * BRIEF MODULE DESCRIPTION + * Defines for using and allocating DMA channels on the Alchemy + * Au1x00 MIPS processors. + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#ifndef __ASM_AU1000_DMA_H +#define __ASM_AU1000_DMA_H + +#include /* need byte IO */ +#include /* And spinlocks */ +#include +#include + +#define NUM_AU1000_DMA_CHANNELS 8 + +/* DMA Channel Base Addresses */ +#define DMA_CHANNEL_BASE 0xB4002000 +#define DMA_CHANNEL_LEN 0x00000100 + +/* DMA Channel Register Offsets */ +#define DMA_MODE_SET 0x00000000 +#define DMA_MODE_READ DMA_MODE_SET +#define DMA_MODE_CLEAR 0x00000004 +/* DMA Mode register bits follow */ +#define DMA_DAH_MASK (0x0f << 20) +#define DMA_DID_BIT 16 +#define DMA_DID_MASK (0x0f << DMA_DID_BIT) +#define DMA_DS (1 << 15) +#define DMA_BE (1 << 13) +#define DMA_DR (1 << 12) +#define DMA_TS8 (1 << 11) +#define DMA_DW_BIT 9 +#define DMA_DW_MASK (0x03 << DMA_DW_BIT) +#define DMA_DW8 (0 << DMA_DW_BIT) +#define DMA_DW16 (1 << DMA_DW_BIT) +#define DMA_DW32 (2 << DMA_DW_BIT) +#define DMA_NC (1 << 8) +#define DMA_IE (1 << 7) +#define DMA_HALT (1 << 6) +#define DMA_GO (1 << 5) +#define DMA_AB (1 << 4) +#define DMA_D1 (1 << 3) +#define DMA_BE1 (1 << 2) +#define DMA_D0 (1 << 1) +#define DMA_BE0 (1 << 0) + +#define DMA_PERIPHERAL_ADDR 0x00000008 +#define DMA_BUFFER0_START 0x0000000C +#define DMA_BUFFER1_START 0x00000014 +#define DMA_BUFFER0_COUNT 0x00000010 +#define DMA_BUFFER1_COUNT 0x00000018 +#define DMA_BAH_BIT 16 +#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT) +#define DMA_COUNT_BIT 0 +#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT) + +/* DMA Device IDs follow */ +enum { + DMA_ID_UART0_TX = 0, + DMA_ID_UART0_RX, + DMA_ID_GP04, + DMA_ID_GP05, + DMA_ID_AC97C_TX, + DMA_ID_AC97C_RX, + DMA_ID_UART3_TX, + DMA_ID_UART3_RX, + DMA_ID_USBDEV_EP0_RX, + DMA_ID_USBDEV_EP0_TX, + DMA_ID_USBDEV_EP2_TX, + DMA_ID_USBDEV_EP3_TX, + DMA_ID_USBDEV_EP4_RX, + DMA_ID_USBDEV_EP5_RX, + DMA_ID_I2S_TX, + DMA_ID_I2S_RX, + DMA_NUM_DEV +}; + +/* DMA Device ID's for 2nd bank (AU1100) follow */ +enum { + DMA_ID_SD0_TX = 0, + DMA_ID_SD0_RX, + DMA_ID_SD1_TX, + DMA_ID_SD1_RX, + DMA_NUM_DEV_BANK2 +}; + +struct dma_chan { + int dev_id; /* this channel is allocated if >= 0, */ + /* free otherwise */ + unsigned int io; + const char *dev_str; + int irq; + void *irq_dev; + unsigned int fifo_addr; + unsigned int mode; +}; + +/* These are in arch/mips/au1000/common/dma.c */ +extern struct dma_chan au1000_dma_table[]; +extern int request_au1000_dma(int dev_id, + const char *dev_str, + irq_handler_t irqhandler, + unsigned long irqflags, + void *irq_dev_id); +extern void free_au1000_dma(unsigned int dmanr); +extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos, + int length, int *eof, void *data); +extern void dump_au1000_dma_channel(unsigned int dmanr); +extern spinlock_t au1000_dma_spin_lock; + +static inline struct dma_chan *get_dma_chan(unsigned int dmanr) +{ + if (dmanr >= NUM_AU1000_DMA_CHANNELS || + au1000_dma_table[dmanr].dev_id < 0) + return NULL; + return &au1000_dma_table[dmanr]; +} + +static inline unsigned long claim_dma_lock(void) +{ + unsigned long flags; + + spin_lock_irqsave(&au1000_dma_spin_lock, flags); + return flags; +} + +static inline void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&au1000_dma_spin_lock, flags); +} + +/* + * Set the DMA buffer enable bits in the mode register. + */ +static inline void enable_dma_buffer0(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(DMA_BE0, chan->io + DMA_MODE_SET); +} + +static inline void enable_dma_buffer1(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(DMA_BE1, chan->io + DMA_MODE_SET); +} +static inline void enable_dma_buffers(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET); +} + +static inline void start_dma(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(DMA_GO, chan->io + DMA_MODE_SET); +} + +#define DMA_HALT_POLL 0x5000 + +static inline void halt_dma(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + int i; + + if (!chan) + return; + au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR); + + /* Poll the halt bit */ + for (i = 0; i < DMA_HALT_POLL; i++) + if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) + break; + if (i == DMA_HALT_POLL) + printk(KERN_INFO "halt_dma: HALT poll expired!\n"); +} + +static inline void disable_dma(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + + halt_dma(dmanr); + + /* Now we can disable the buffers */ + au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR); +} + +static inline int dma_halted(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return 1; + return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0; +} + +/* Initialize a DMA channel. */ +static inline void init_dma(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + u32 mode; + + if (!chan) + return; + + disable_dma(dmanr); + + /* Set device FIFO address */ + au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR); + + mode = chan->mode | (chan->dev_id << DMA_DID_BIT); + if (chan->irq) + mode |= DMA_IE; + + au_writel(~mode, chan->io + DMA_MODE_CLEAR); + au_writel(mode, chan->io + DMA_MODE_SET); +} + +/* + * Set mode for a specific DMA channel + */ +static inline void set_dma_mode(unsigned int dmanr, unsigned int mode) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + /* + * set_dma_mode is only allowed to change endianess, direction, + * transfer size, device FIFO width, and coherency settings. + * Make sure anything else is masked off. + */ + mode &= (DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC); + chan->mode &= ~(DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC); + chan->mode |= mode; +} + +static inline unsigned int get_dma_mode(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return 0; + return chan->mode; +} + +static inline int get_dma_active_buffer(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return -1; + return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0; +} + +/* + * Set the device FIFO address for a specific DMA channel - only + * applicable to GPO4 and GPO5. All the other devices have fixed + * FIFO addresses. + */ +static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + + if (chan->mode & DMA_DS) /* second bank of device IDs */ + return; + + if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05) + return; + + au_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR); +} + +/* + * Clear the DMA buffer done bits in the mode register. + */ +static inline void clear_dma_done0(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR); +} + +static inline void clear_dma_done1(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR); +} + +/* + * This does nothing - not applicable to Au1000 DMA. + */ +static inline void set_dma_page(unsigned int dmanr, char pagenr) +{ +} + +/* + * Set Buffer 0 transfer address for specific DMA channel. + */ +static inline void set_dma_addr0(unsigned int dmanr, unsigned int a) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(a, chan->io + DMA_BUFFER0_START); +} + +/* + * Set Buffer 1 transfer address for specific DMA channel. + */ +static inline void set_dma_addr1(unsigned int dmanr, unsigned int a) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + au_writel(a, chan->io + DMA_BUFFER1_START); +} + + +/* + * Set Buffer 0 transfer size (max 64k) for a specific DMA channel. + */ +static inline void set_dma_count0(unsigned int dmanr, unsigned int count) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + count &= DMA_COUNT_MASK; + au_writel(count, chan->io + DMA_BUFFER0_COUNT); +} + +/* + * Set Buffer 1 transfer size (max 64k) for a specific DMA channel. + */ +static inline void set_dma_count1(unsigned int dmanr, unsigned int count) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + count &= DMA_COUNT_MASK; + au_writel(count, chan->io + DMA_BUFFER1_COUNT); +} + +/* + * Set both buffer transfer sizes (max 64k) for a specific DMA channel. + */ +static inline void set_dma_count(unsigned int dmanr, unsigned int count) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return; + count &= DMA_COUNT_MASK; + au_writel(count, chan->io + DMA_BUFFER0_COUNT); + au_writel(count, chan->io + DMA_BUFFER1_COUNT); +} + +/* + * Returns which buffer has its done bit set in the mode register. + * Returns -1 if neither or both done bits set. + */ +static inline unsigned int get_dma_buffer_done(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return 0; + return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1); +} + + +/* + * Returns the DMA channel's Buffer Done IRQ number. + */ +static inline int get_dma_done_irq(unsigned int dmanr) +{ + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return -1; + return chan->irq; +} + +/* + * Get DMA residue count. Returns the number of _bytes_ left to transfer. + */ +static inline int get_dma_residue(unsigned int dmanr) +{ + int curBufCntReg, count; + struct dma_chan *chan = get_dma_chan(dmanr); + + if (!chan) + return 0; + + curBufCntReg = (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? + DMA_BUFFER1_COUNT : DMA_BUFFER0_COUNT; + + count = au_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK; + + if ((chan->mode & DMA_DW_MASK) == DMA_DW16) + count <<= 1; + else if ((chan->mode & DMA_DW_MASK) == DMA_DW32) + count <<= 2; + + return count; +} + +#endif /* __ASM_AU1000_DMA_H */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000_gpio.h b/arch/mips/include/asm/mach-au1x00/au1000_gpio.h new file mode 100644 index 000000000000..d8c96fda5549 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1000_gpio.h @@ -0,0 +1,56 @@ +/* + * FILE NAME au1000_gpio.h + * + * BRIEF MODULE DESCRIPTION + * API to Alchemy Au1xx0 GPIO device. + * + * Author: MontaVista Software, Inc. + * Steve Longerbeam + * + * Copyright 2001, 2008 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __AU1000_GPIO_H +#define __AU1000_GPIO_H + +#include + +#define AU1000GPIO_IOC_MAGIC 'A' + +#define AU1000GPIO_IN _IOR(AU1000GPIO_IOC_MAGIC, 0, int) +#define AU1000GPIO_SET _IOW(AU1000GPIO_IOC_MAGIC, 1, int) +#define AU1000GPIO_CLEAR _IOW(AU1000GPIO_IOC_MAGIC, 2, int) +#define AU1000GPIO_OUT _IOW(AU1000GPIO_IOC_MAGIC, 3, int) +#define AU1000GPIO_TRISTATE _IOW(AU1000GPIO_IOC_MAGIC, 4, int) +#define AU1000GPIO_AVAIL_MASK _IOR(AU1000GPIO_IOC_MAGIC, 5, int) + +#ifdef __KERNEL__ +extern u32 get_au1000_avail_gpio_mask(void); +extern int au1000gpio_tristate(u32 data); +extern int au1000gpio_in(u32 *data); +extern int au1000gpio_set(u32 data); +extern int au1000gpio_clear(u32 data); +extern int au1000gpio_out(u32 data); +#endif + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h new file mode 100644 index 000000000000..c35e20918490 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h @@ -0,0 +1,208 @@ +/* + * BRIEF MODULE DESCRIPTION + * Defines for using the MMC/SD controllers on the + * Alchemy Au1100 mips processor. + * + * Copyright (c) 2003 Embedded Edge, LLC. + * Author: Embedded Edge, LLC. + * dan@embeddededge.com or tim@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +/* + * AU1100 MMC/SD definitions. + * + * From "AMD Alchemy Solutions Au1100 Processor Data Book - Preliminary" + * June, 2003 + */ + +#ifndef __ASM_AU1100_MMC_H +#define __ASM_AU1100_MMC_H + +#include + +struct au1xmmc_platform_data { + int(*cd_setup)(void *mmc_host, int on); + int(*card_inserted)(void *mmc_host); + int(*card_readonly)(void *mmc_host); + void(*set_power)(void *mmc_host, int state); + struct led_classdev *led; +}; + +#define SD0_BASE 0xB0600000 +#define SD1_BASE 0xB0680000 + + +/* + * Register offsets. + */ +#define SD_TXPORT (0x0000) +#define SD_RXPORT (0x0004) +#define SD_CONFIG (0x0008) +#define SD_ENABLE (0x000C) +#define SD_CONFIG2 (0x0010) +#define SD_BLKSIZE (0x0014) +#define SD_STATUS (0x0018) +#define SD_DEBUG (0x001C) +#define SD_CMD (0x0020) +#define SD_CMDARG (0x0024) +#define SD_RESP3 (0x0028) +#define SD_RESP2 (0x002C) +#define SD_RESP1 (0x0030) +#define SD_RESP0 (0x0034) +#define SD_TIMEOUT (0x0038) + + +/* + * SD_TXPORT bit definitions. + */ +#define SD_TXPORT_TXD (0x000000ff) + + +/* + * SD_RXPORT bit definitions. + */ +#define SD_RXPORT_RXD (0x000000ff) + + +/* + * SD_CONFIG bit definitions. + */ +#define SD_CONFIG_DIV (0x000001ff) +#define SD_CONFIG_DE (0x00000200) +#define SD_CONFIG_NE (0x00000400) +#define SD_CONFIG_TU (0x00000800) +#define SD_CONFIG_TO (0x00001000) +#define SD_CONFIG_RU (0x00002000) +#define SD_CONFIG_RO (0x00004000) +#define SD_CONFIG_I (0x00008000) +#define SD_CONFIG_CR (0x00010000) +#define SD_CONFIG_RAT (0x00020000) +#define SD_CONFIG_DD (0x00040000) +#define SD_CONFIG_DT (0x00080000) +#define SD_CONFIG_SC (0x00100000) +#define SD_CONFIG_RC (0x00200000) +#define SD_CONFIG_WC (0x00400000) +#define SD_CONFIG_xxx (0x00800000) +#define SD_CONFIG_TH (0x01000000) +#define SD_CONFIG_TE (0x02000000) +#define SD_CONFIG_TA (0x04000000) +#define SD_CONFIG_RH (0x08000000) +#define SD_CONFIG_RA (0x10000000) +#define SD_CONFIG_RF (0x20000000) +#define SD_CONFIG_CD (0x40000000) +#define SD_CONFIG_SI (0x80000000) + + +/* + * SD_ENABLE bit definitions. + */ +#define SD_ENABLE_CE (0x00000001) +#define SD_ENABLE_R (0x00000002) + + +/* + * SD_CONFIG2 bit definitions. + */ +#define SD_CONFIG2_EN (0x00000001) +#define SD_CONFIG2_FF (0x00000002) +#define SD_CONFIG2_xx1 (0x00000004) +#define SD_CONFIG2_DF (0x00000008) +#define SD_CONFIG2_DC (0x00000010) +#define SD_CONFIG2_xx2 (0x000000e0) +#define SD_CONFIG2_WB (0x00000100) +#define SD_CONFIG2_RW (0x00000200) + + +/* + * SD_BLKSIZE bit definitions. + */ +#define SD_BLKSIZE_BS (0x000007ff) +#define SD_BLKSIZE_BS_SHIFT (0) +#define SD_BLKSIZE_BC (0x01ff0000) +#define SD_BLKSIZE_BC_SHIFT (16) + + +/* + * SD_STATUS bit definitions. + */ +#define SD_STATUS_DCRCW (0x00000007) +#define SD_STATUS_xx1 (0x00000008) +#define SD_STATUS_CB (0x00000010) +#define SD_STATUS_DB (0x00000020) +#define SD_STATUS_CF (0x00000040) +#define SD_STATUS_D3 (0x00000080) +#define SD_STATUS_xx2 (0x00000300) +#define SD_STATUS_NE (0x00000400) +#define SD_STATUS_TU (0x00000800) +#define SD_STATUS_TO (0x00001000) +#define SD_STATUS_RU (0x00002000) +#define SD_STATUS_RO (0x00004000) +#define SD_STATUS_I (0x00008000) +#define SD_STATUS_CR (0x00010000) +#define SD_STATUS_RAT (0x00020000) +#define SD_STATUS_DD (0x00040000) +#define SD_STATUS_DT (0x00080000) +#define SD_STATUS_SC (0x00100000) +#define SD_STATUS_RC (0x00200000) +#define SD_STATUS_WC (0x00400000) +#define SD_STATUS_xx3 (0x00800000) +#define SD_STATUS_TH (0x01000000) +#define SD_STATUS_TE (0x02000000) +#define SD_STATUS_TA (0x04000000) +#define SD_STATUS_RH (0x08000000) +#define SD_STATUS_RA (0x10000000) +#define SD_STATUS_RF (0x20000000) +#define SD_STATUS_CD (0x40000000) +#define SD_STATUS_SI (0x80000000) + + +/* + * SD_CMD bit definitions. + */ +#define SD_CMD_GO (0x00000001) +#define SD_CMD_RY (0x00000002) +#define SD_CMD_xx1 (0x0000000c) +#define SD_CMD_CT_MASK (0x000000f0) +#define SD_CMD_CT_0 (0x00000000) +#define SD_CMD_CT_1 (0x00000010) +#define SD_CMD_CT_2 (0x00000020) +#define SD_CMD_CT_3 (0x00000030) +#define SD_CMD_CT_4 (0x00000040) +#define SD_CMD_CT_5 (0x00000050) +#define SD_CMD_CT_6 (0x00000060) +#define SD_CMD_CT_7 (0x00000070) +#define SD_CMD_CI (0x0000ff00) +#define SD_CMD_CI_SHIFT (8) +#define SD_CMD_RT_MASK (0x00ff0000) +#define SD_CMD_RT_0 (0x00000000) +#define SD_CMD_RT_1 (0x00010000) +#define SD_CMD_RT_2 (0x00020000) +#define SD_CMD_RT_3 (0x00030000) +#define SD_CMD_RT_4 (0x00040000) +#define SD_CMD_RT_5 (0x00050000) +#define SD_CMD_RT_6 (0x00060000) +#define SD_CMD_RT_1B (0x00810000) + + +#endif /* __ASM_AU1100_MMC_H */ + diff --git a/arch/mips/include/asm/mach-au1x00/au1550_spi.h b/arch/mips/include/asm/mach-au1x00/au1550_spi.h new file mode 100644 index 000000000000..08e1958e9410 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1550_spi.h @@ -0,0 +1,15 @@ +/* + * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure + */ + +#ifndef _AU1550_SPI_H_ +#define _AU1550_SPI_H_ + +struct au1550_spi_info { + u32 mainclk_hz; /* main input clock frequency of PSC */ + u16 num_chipselect; /* number of chipselects supported */ + void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity); + void (*deactivate_cs)(struct au1550_spi_info *spi, int cs, int polarity); +}; + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx.h b/arch/mips/include/asm/mach-au1x00/au1xxx.h new file mode 100644 index 000000000000..1b3655090ed3 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1xxx.h @@ -0,0 +1,43 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _AU1XXX_H_ +#define _AU1XXX_H_ + +#include + +#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \ + defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) +#include + +#elif defined(CONFIG_MIPS_PB1550) +#include + +#elif defined(CONFIG_MIPS_PB1200) +#include + +#elif defined(CONFIG_MIPS_DB1200) +#include + +#endif + +#endif /* _AU1XXX_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h new file mode 100644 index 000000000000..44a67bf05dc1 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -0,0 +1,386 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Include file for Alchemy Semiconductor's Au1550 Descriptor + * Based DMA Controller. + * + * Copyright 2004 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Specifics for the Au1xxx Descriptor-Based DMA Controller, + * first seen in the AU1550 part. + */ +#ifndef _AU1000_DBDMA_H_ +#define _AU1000_DBDMA_H_ + +#ifndef _LANGUAGE_ASSEMBLY + +/* + * The DMA base addresses. + * The channels are every 256 bytes (0x0100) from the channel 0 base. + * Interrupt status/enable is bits 15:0 for channels 15 to zero. + */ +#define DDMA_GLOBAL_BASE 0xb4003000 +#define DDMA_CHANNEL_BASE 0xb4002000 + +typedef volatile struct dbdma_global { + u32 ddma_config; + u32 ddma_intstat; + u32 ddma_throttle; + u32 ddma_inten; +} dbdma_global_t; + +/* General Configuration. */ +#define DDMA_CONFIG_AF (1 << 2) +#define DDMA_CONFIG_AH (1 << 1) +#define DDMA_CONFIG_AL (1 << 0) + +#define DDMA_THROTTLE_EN (1 << 31) + +/* The structure of a DMA Channel. */ +typedef volatile struct au1xxx_dma_channel { + u32 ddma_cfg; /* See below */ + u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */ + u32 ddma_statptr; /* word aligned pointer to status word */ + u32 ddma_dbell; /* A write activates channel operation */ + u32 ddma_irq; /* If bit 0 set, interrupt pending */ + u32 ddma_stat; /* See below */ + u32 ddma_bytecnt; /* Byte count, valid only when chan idle */ + /* Remainder, up to the 256 byte boundary, is reserved. */ +} au1x_dma_chan_t; + +#define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */ +#define DDMA_CFG_SP (1 << 8) /* source DMA polarity */ +#define DDMA_CFG_DED (1 << 7) /* destination DMA level/edge detect */ +#define DDMA_CFG_DP (1 << 6) /* destination DMA polarity */ +#define DDMA_CFG_SYNC (1 << 5) /* Sync static bus controller */ +#define DDMA_CFG_PPR (1 << 4) /* PCI posted read/write control */ +#define DDMA_CFG_DFN (1 << 3) /* Descriptor fetch non-coherent */ +#define DDMA_CFG_SBE (1 << 2) /* Source big endian */ +#define DDMA_CFG_DBE (1 << 1) /* Destination big endian */ +#define DDMA_CFG_EN (1 << 0) /* Channel enable */ + +/* + * Always set when descriptor processing done, regardless of + * interrupt enable state. Reflected in global intstat, don't + * clear this until global intstat is read/used. + */ +#define DDMA_IRQ_IN (1 << 0) + +#define DDMA_STAT_DB (1 << 2) /* Doorbell pushed */ +#define DDMA_STAT_V (1 << 1) /* Descriptor valid */ +#define DDMA_STAT_H (1 << 0) /* Channel Halted */ + +/* + * "Standard" DDMA Descriptor. + * Must be 32-byte aligned. + */ +typedef volatile struct au1xxx_ddma_desc { + u32 dscr_cmd0; /* See below */ + u32 dscr_cmd1; /* See below */ + u32 dscr_source0; /* source phys address */ + u32 dscr_source1; /* See below */ + u32 dscr_dest0; /* Destination address */ + u32 dscr_dest1; /* See below */ + u32 dscr_stat; /* completion status */ + u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */ + /* + * First 32 bytes are HW specific!!! + * Lets have some SW data following -- make sure it's 32 bytes. + */ + u32 sw_status; + u32 sw_context; + u32 sw_reserved[6]; +} au1x_ddma_desc_t; + +#define DSCR_CMD0_V (1 << 31) /* Descriptor valid */ +#define DSCR_CMD0_MEM (1 << 30) /* mem-mem transfer */ +#define DSCR_CMD0_SID_MASK (0x1f << 25) /* Source ID */ +#define DSCR_CMD0_DID_MASK (0x1f << 20) /* Destination ID */ +#define DSCR_CMD0_SW_MASK (0x3 << 18) /* Source Width */ +#define DSCR_CMD0_DW_MASK (0x3 << 16) /* Destination Width */ +#define DSCR_CMD0_ARB (0x1 << 15) /* Set for Hi Pri */ +#define DSCR_CMD0_DT_MASK (0x3 << 13) /* Descriptor Type */ +#define DSCR_CMD0_SN (0x1 << 12) /* Source non-coherent */ +#define DSCR_CMD0_DN (0x1 << 11) /* Destination non-coherent */ +#define DSCR_CMD0_SM (0x1 << 10) /* Stride mode */ +#define DSCR_CMD0_IE (0x1 << 8) /* Interrupt Enable */ +#define DSCR_CMD0_SP (0x1 << 4) /* Status pointer select */ +#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */ +#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */ + +#define SW_STATUS_INUSE (1 << 0) + +/* Command 0 device IDs. */ +#ifdef CONFIG_SOC_AU1550 +#define DSCR_CMD0_UART0_TX 0 +#define DSCR_CMD0_UART0_RX 1 +#define DSCR_CMD0_UART3_TX 2 +#define DSCR_CMD0_UART3_RX 3 +#define DSCR_CMD0_DMA_REQ0 4 +#define DSCR_CMD0_DMA_REQ1 5 +#define DSCR_CMD0_DMA_REQ2 6 +#define DSCR_CMD0_DMA_REQ3 7 +#define DSCR_CMD0_USBDEV_RX0 8 +#define DSCR_CMD0_USBDEV_TX0 9 +#define DSCR_CMD0_USBDEV_TX1 10 +#define DSCR_CMD0_USBDEV_TX2 11 +#define DSCR_CMD0_USBDEV_RX3 12 +#define DSCR_CMD0_USBDEV_RX4 13 +#define DSCR_CMD0_PSC0_TX 14 +#define DSCR_CMD0_PSC0_RX 15 +#define DSCR_CMD0_PSC1_TX 16 +#define DSCR_CMD0_PSC1_RX 17 +#define DSCR_CMD0_PSC2_TX 18 +#define DSCR_CMD0_PSC2_RX 19 +#define DSCR_CMD0_PSC3_TX 20 +#define DSCR_CMD0_PSC3_RX 21 +#define DSCR_CMD0_PCI_WRITE 22 +#define DSCR_CMD0_NAND_FLASH 23 +#define DSCR_CMD0_MAC0_RX 24 +#define DSCR_CMD0_MAC0_TX 25 +#define DSCR_CMD0_MAC1_RX 26 +#define DSCR_CMD0_MAC1_TX 27 +#endif /* CONFIG_SOC_AU1550 */ + +#ifdef CONFIG_SOC_AU1200 +#define DSCR_CMD0_UART0_TX 0 +#define DSCR_CMD0_UART0_RX 1 +#define DSCR_CMD0_UART1_TX 2 +#define DSCR_CMD0_UART1_RX 3 +#define DSCR_CMD0_DMA_REQ0 4 +#define DSCR_CMD0_DMA_REQ1 5 +#define DSCR_CMD0_MAE_BE 6 +#define DSCR_CMD0_MAE_FE 7 +#define DSCR_CMD0_SDMS_TX0 8 +#define DSCR_CMD0_SDMS_RX0 9 +#define DSCR_CMD0_SDMS_TX1 10 +#define DSCR_CMD0_SDMS_RX1 11 +#define DSCR_CMD0_AES_TX 13 +#define DSCR_CMD0_AES_RX 12 +#define DSCR_CMD0_PSC0_TX 14 +#define DSCR_CMD0_PSC0_RX 15 +#define DSCR_CMD0_PSC1_TX 16 +#define DSCR_CMD0_PSC1_RX 17 +#define DSCR_CMD0_CIM_RXA 18 +#define DSCR_CMD0_CIM_RXB 19 +#define DSCR_CMD0_CIM_RXC 20 +#define DSCR_CMD0_MAE_BOTH 21 +#define DSCR_CMD0_LCD 22 +#define DSCR_CMD0_NAND_FLASH 23 +#define DSCR_CMD0_PSC0_SYNC 24 +#define DSCR_CMD0_PSC1_SYNC 25 +#define DSCR_CMD0_CIM_SYNC 26 +#endif /* CONFIG_SOC_AU1200 */ + +#define DSCR_CMD0_THROTTLE 30 +#define DSCR_CMD0_ALWAYS 31 +#define DSCR_NDEV_IDS 32 +/* This macro is used to find/create custom device types */ +#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \ + ((d) & 0xFF)) +#define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF) + +#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25) +#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20) + +/* Source/Destination transfer width. */ +#define DSCR_CMD0_BYTE 0 +#define DSCR_CMD0_HALFWORD 1 +#define DSCR_CMD0_WORD 2 + +#define DSCR_CMD0_SW(x) (((x) & 0x3) << 18) +#define DSCR_CMD0_DW(x) (((x) & 0x3) << 16) + +/* DDMA Descriptor Type. */ +#define DSCR_CMD0_STANDARD 0 +#define DSCR_CMD0_LITERAL 1 +#define DSCR_CMD0_CMP_BRANCH 2 + +#define DSCR_CMD0_DT(x) (((x) & 0x3) << 13) + +/* Status Instruction. */ +#define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */ +#define DSCR_CMD0_ST_CURRENT 1 /* Write current status */ +#define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */ +#define DSCR_CMD0_ST_BYTECNT 3 /* Write remaining byte count */ + +#define DSCR_CMD0_ST(x) (((x) & 0x3) << 0) + +/* Descriptor Command 1. */ +#define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */ +#define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */ +#define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */ +#define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */ + +/* Flag description. */ +#define DSCR_CMD1_FL_MEM_STRIDE0 0 +#define DSCR_CMD1_FL_MEM_STRIDE1 1 +#define DSCR_CMD1_FL_MEM_STRIDE2 2 + +#define DSCR_CMD1_FL(x) (((x) & 0x3) << 22) + +/* Source1, 1-dimensional stride. */ +#define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */ +#define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */ +#define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */ +#define DSCR_SRC1_SB(x) (((x) & 0x3fff) << 14) +#define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */ +#define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0) + +/* Dest1, 1-dimensional stride. */ +#define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */ +#define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */ +#define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */ +#define DSCR_DEST1_DB(x) (((x) & 0x3fff) << 14) +#define DSCR_DEST1_DS_MASK (0x3fff << 0) /* Stride */ +#define DSCR_DEST1_DS(x) (((x) & 0x3fff) << 0) + +#define DSCR_xTS_SIZE1 0 +#define DSCR_xTS_SIZE2 1 +#define DSCR_xTS_SIZE4 2 +#define DSCR_xTS_SIZE8 3 +#define DSCR_SRC1_STS(x) (((x) & 3) << 30) +#define DSCR_DEST1_DTS(x) (((x) & 3) << 30) + +#define DSCR_xAM_INCREMENT 0 +#define DSCR_xAM_DECREMENT 1 +#define DSCR_xAM_STATIC 2 +#define DSCR_xAM_BURST 3 +#define DSCR_SRC1_SAM(x) (((x) & 3) << 28) +#define DSCR_DEST1_DAM(x) (((x) & 3) << 28) + +/* The next descriptor pointer. */ +#define DSCR_NXTPTR_MASK (0x07ffffff) +#define DSCR_NXTPTR(x) ((x) >> 5) +#define DSCR_GET_NXTPTR(x) ((x) << 5) +#define DSCR_NXTPTR_MS (1 << 27) + +/* The number of DBDMA channels. */ +#define NUM_DBDMA_CHANS 16 + +/* + * DDMA API definitions + * FIXME: may not fit to this header file + */ +typedef struct dbdma_device_table { + u32 dev_id; + u32 dev_flags; + u32 dev_tsize; + u32 dev_devwidth; + u32 dev_physaddr; /* If FIFO */ + u32 dev_intlevel; + u32 dev_intpolarity; +} dbdev_tab_t; + + +typedef struct dbdma_chan_config { + spinlock_t lock; + + u32 chan_flags; + u32 chan_index; + dbdev_tab_t *chan_src; + dbdev_tab_t *chan_dest; + au1x_dma_chan_t *chan_ptr; + au1x_ddma_desc_t *chan_desc_base; + au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; + void *chan_callparam; + void (*chan_callback)(int, void *); +} chan_tab_t; + +#define DEV_FLAGS_INUSE (1 << 0) +#define DEV_FLAGS_ANYUSE (1 << 1) +#define DEV_FLAGS_OUT (1 << 2) +#define DEV_FLAGS_IN (1 << 3) +#define DEV_FLAGS_BURSTABLE (1 << 4) +#define DEV_FLAGS_SYNC (1 << 5) +/* end DDMA API definitions */ + +/* + * External functions for drivers to use. + * Use this to allocate a DBDMA channel. The device IDs are one of + * the DSCR_CMD0 devices IDs, which is usually redefined to a more + * meaningful name. The 'callback' is called during DMA completion + * interrupt. + */ +extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, + void (*callback)(int, void *), + void *callparam); + +#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS + +/* Set the device width of an in/out FIFO. */ +u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits); + +/* Allocate a ring of descriptors for DBDMA. */ +u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries); + +/* Put buffers on source/destination descriptors. */ +u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags); +u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags); + +/* Get a buffer from the destination descriptor. */ +u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes); + +void au1xxx_dbdma_stop(u32 chanid); +void au1xxx_dbdma_start(u32 chanid); +void au1xxx_dbdma_reset(u32 chanid); +u32 au1xxx_get_dma_residue(u32 chanid); + +void au1xxx_dbdma_chan_free(u32 chanid); +void au1xxx_dbdma_dump(u32 chanid); + +u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr); + +u32 au1xxx_ddma_add_device(dbdev_tab_t *dev); +extern void au1xxx_ddma_del_device(u32 devid); +void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); + +/* + * Some compatibilty macros -- needed to make changes to API + * without breaking existing drivers. + */ +#define au1xxx_dbdma_put_source(chanid, buf, nbytes) \ + _au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE) +#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) \ + _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags) +#define put_source_flags(chanid, buf, nbytes, flags) \ + au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) + +#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) \ + _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE) +#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) \ + _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags) +#define put_dest_flags(chanid, buf, nbytes, flags) \ + au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) + +/* + * Flags for the put_source/put_dest functions. + */ +#define DDMA_FLAGS_IE (1 << 0) +#define DDMA_FLAGS_NOIE (1 << 1) + +#endif /* _LANGUAGE_ASSEMBLY */ +#endif /* _AU1000_DBDMA_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h new file mode 100644 index 000000000000..60638b8969ba --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h @@ -0,0 +1,194 @@ +/* + * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005 + * + * BRIEF MODULE DESCRIPTION + * AMD Alchemy Au1xxx IDE interface routines over the Static Bus + * + * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any later + * version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE + * Interface and Linux Device Driver" Application Note. + */ + +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA +#define DMA_WAIT_TIMEOUT 100 +#define NUM_DESCRIPTORS PRD_ENTRIES +#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */ +#define NUM_DESCRIPTORS 2 +#endif + +#ifndef AU1XXX_ATA_RQSIZE +#define AU1XXX_ATA_RQSIZE 128 +#endif + +/* Disable Burstable-Support for DBDMA */ +#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON +#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0 +#endif + +#ifdef CONFIG_PM +/* + * This will enable the device to be powered up when write() or read() + * is called. If this is not defined, the driver will return -EBUSY. + */ +#define WAKE_ON_ACCESS 1 + +typedef struct { + spinlock_t lock; /* Used to block on state transitions */ + au1xxx_power_dev_t *dev; /* Power Managers device structure */ + unsigned stopped; /* Used to signal device is stopped */ +} pm_state; +#endif + +typedef struct { + u32 tx_dev_id, rx_dev_id, target_dev_id; + u32 tx_chan, rx_chan; + void *tx_desc_head, *rx_desc_head; + ide_hwif_t *hwif; +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + ide_drive_t *drive; + struct dbdma_cmd *dma_table_cpu; + dma_addr_t dma_table_dma; +#endif + int irq; + u32 regbase; +#ifdef CONFIG_PM + pm_state pm; +#endif +} _auide_hwif; + +/******************************************************************************/ +/* PIO Mode timing calculation : */ +/* */ +/* Static Bus Spec ATA Spec */ +/* Tcsoe = t1 */ +/* Toecs = t9 */ +/* Twcs = t9 */ +/* Tcsh = t2i | t2 */ +/* Tcsoff = t2i | t2 */ +/* Twp = t2 */ +/* Tcsw = t1 */ +/* Tpm = 0 */ +/* Ta = t1+t2 */ +/******************************************************************************/ + +#define TCSOE_MASK (0x07 << 29) +#define TOECS_MASK (0x07 << 26) +#define TWCS_MASK (0x07 << 28) +#define TCSH_MASK (0x0F << 24) +#define TCSOFF_MASK (0x07 << 20) +#define TWP_MASK (0x3F << 14) +#define TCSW_MASK (0x0F << 10) +#define TPM_MASK (0x0F << 6) +#define TA_MASK (0x3F << 0) +#define TS_MASK (1 << 8) + +/* Timing parameters PIO mode 0 */ +#define SBC_IDE_PIO0_TCSOE (0x04 << 29) +#define SBC_IDE_PIO0_TOECS (0x01 << 26) +#define SBC_IDE_PIO0_TWCS (0x02 << 28) +#define SBC_IDE_PIO0_TCSH (0x08 << 24) +#define SBC_IDE_PIO0_TCSOFF (0x07 << 20) +#define SBC_IDE_PIO0_TWP (0x10 << 14) +#define SBC_IDE_PIO0_TCSW (0x04 << 10) +#define SBC_IDE_PIO0_TPM (0x00 << 6) +#define SBC_IDE_PIO0_TA (0x15 << 0) +/* Timing parameters PIO mode 1 */ +#define SBC_IDE_PIO1_TCSOE (0x03 << 29) +#define SBC_IDE_PIO1_TOECS (0x01 << 26) +#define SBC_IDE_PIO1_TWCS (0x01 << 28) +#define SBC_IDE_PIO1_TCSH (0x06 << 24) +#define SBC_IDE_PIO1_TCSOFF (0x06 << 20) +#define SBC_IDE_PIO1_TWP (0x08 << 14) +#define SBC_IDE_PIO1_TCSW (0x03 << 10) +#define SBC_IDE_PIO1_TPM (0x00 << 6) +#define SBC_IDE_PIO1_TA (0x0B << 0) +/* Timing parameters PIO mode 2 */ +#define SBC_IDE_PIO2_TCSOE (0x05 << 29) +#define SBC_IDE_PIO2_TOECS (0x01 << 26) +#define SBC_IDE_PIO2_TWCS (0x01 << 28) +#define SBC_IDE_PIO2_TCSH (0x07 << 24) +#define SBC_IDE_PIO2_TCSOFF (0x07 << 20) +#define SBC_IDE_PIO2_TWP (0x1F << 14) +#define SBC_IDE_PIO2_TCSW (0x05 << 10) +#define SBC_IDE_PIO2_TPM (0x00 << 6) +#define SBC_IDE_PIO2_TA (0x22 << 0) +/* Timing parameters PIO mode 3 */ +#define SBC_IDE_PIO3_TCSOE (0x05 << 29) +#define SBC_IDE_PIO3_TOECS (0x01 << 26) +#define SBC_IDE_PIO3_TWCS (0x01 << 28) +#define SBC_IDE_PIO3_TCSH (0x0D << 24) +#define SBC_IDE_PIO3_TCSOFF (0x0D << 20) +#define SBC_IDE_PIO3_TWP (0x15 << 14) +#define SBC_IDE_PIO3_TCSW (0x05 << 10) +#define SBC_IDE_PIO3_TPM (0x00 << 6) +#define SBC_IDE_PIO3_TA (0x1A << 0) +/* Timing parameters PIO mode 4 */ +#define SBC_IDE_PIO4_TCSOE (0x04 << 29) +#define SBC_IDE_PIO4_TOECS (0x01 << 26) +#define SBC_IDE_PIO4_TWCS (0x01 << 28) +#define SBC_IDE_PIO4_TCSH (0x04 << 24) +#define SBC_IDE_PIO4_TCSOFF (0x04 << 20) +#define SBC_IDE_PIO4_TWP (0x0D << 14) +#define SBC_IDE_PIO4_TCSW (0x03 << 10) +#define SBC_IDE_PIO4_TPM (0x00 << 6) +#define SBC_IDE_PIO4_TA (0x12 << 0) +/* Timing parameters MDMA mode 0 */ +#define SBC_IDE_MDMA0_TCSOE (0x03 << 29) +#define SBC_IDE_MDMA0_TOECS (0x01 << 26) +#define SBC_IDE_MDMA0_TWCS (0x01 << 28) +#define SBC_IDE_MDMA0_TCSH (0x07 << 24) +#define SBC_IDE_MDMA0_TCSOFF (0x07 << 20) +#define SBC_IDE_MDMA0_TWP (0x0C << 14) +#define SBC_IDE_MDMA0_TCSW (0x03 << 10) +#define SBC_IDE_MDMA0_TPM (0x00 << 6) +#define SBC_IDE_MDMA0_TA (0x0F << 0) +/* Timing parameters MDMA mode 1 */ +#define SBC_IDE_MDMA1_TCSOE (0x05 << 29) +#define SBC_IDE_MDMA1_TOECS (0x01 << 26) +#define SBC_IDE_MDMA1_TWCS (0x01 << 28) +#define SBC_IDE_MDMA1_TCSH (0x05 << 24) +#define SBC_IDE_MDMA1_TCSOFF (0x05 << 20) +#define SBC_IDE_MDMA1_TWP (0x0F << 14) +#define SBC_IDE_MDMA1_TCSW (0x05 << 10) +#define SBC_IDE_MDMA1_TPM (0x00 << 6) +#define SBC_IDE_MDMA1_TA (0x15 << 0) +/* Timing parameters MDMA mode 2 */ +#define SBC_IDE_MDMA2_TCSOE (0x04 << 29) +#define SBC_IDE_MDMA2_TOECS (0x01 << 26) +#define SBC_IDE_MDMA2_TWCS (0x01 << 28) +#define SBC_IDE_MDMA2_TCSH (0x04 << 24) +#define SBC_IDE_MDMA2_TCSOFF (0x04 << 20) +#define SBC_IDE_MDMA2_TWP (0x0D << 14) +#define SBC_IDE_MDMA2_TCSW (0x04 << 10) +#define SBC_IDE_MDMA2_TPM (0x00 << 6) +#define SBC_IDE_MDMA2_TA (0x12 << 0) + +#define SBC_IDE_TIMING(mode) \ + (SBC_IDE_##mode##_TWCS | \ + SBC_IDE_##mode##_TCSH | \ + SBC_IDE_##mode##_TCSOFF | \ + SBC_IDE_##mode##_TWP | \ + SBC_IDE_##mode##_TCSW | \ + SBC_IDE_##mode##_TPM | \ + SBC_IDE_##mode##_TA) diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h new file mode 100644 index 000000000000..892b7f168eb4 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h @@ -0,0 +1,505 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Include file for Alchemy Semiconductor's Au1k CPU. + * + * Copyright 2004 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Specifics for the Au1xxx Programmable Serial Controllers, first + * seen in the AU1550 part. + */ +#ifndef _AU1000_PSC_H_ +#define _AU1000_PSC_H_ + +/* The PSC base addresses. */ +#ifdef CONFIG_SOC_AU1550 +#define PSC0_BASE_ADDR 0xb1a00000 +#define PSC1_BASE_ADDR 0xb1b00000 +#define PSC2_BASE_ADDR 0xb0a00000 +#define PSC3_BASE_ADDR 0xb0b00000 +#endif + +#ifdef CONFIG_SOC_AU1200 +#define PSC0_BASE_ADDR 0xb1a00000 +#define PSC1_BASE_ADDR 0xb1b00000 +#endif + +/* + * The PSC select and control registers are common to all protocols. + */ +#define PSC_SEL_OFFSET 0x00000000 +#define PSC_CTRL_OFFSET 0x00000004 + +#define PSC_SEL_CLK_MASK (3 << 4) +#define PSC_SEL_CLK_INTCLK (0 << 4) +#define PSC_SEL_CLK_EXTCLK (1 << 4) +#define PSC_SEL_CLK_SERCLK (2 << 4) + +#define PSC_SEL_PS_MASK 0x00000007 +#define PSC_SEL_PS_DISABLED 0 +#define PSC_SEL_PS_SPIMODE 2 +#define PSC_SEL_PS_I2SMODE 3 +#define PSC_SEL_PS_AC97MODE 4 +#define PSC_SEL_PS_SMBUSMODE 5 + +#define PSC_CTRL_DISABLE 0 +#define PSC_CTRL_SUSPEND 2 +#define PSC_CTRL_ENABLE 3 + +/* AC97 Registers. */ +#define PSC_AC97CFG_OFFSET 0x00000008 +#define PSC_AC97MSK_OFFSET 0x0000000c +#define PSC_AC97PCR_OFFSET 0x00000010 +#define PSC_AC97STAT_OFFSET 0x00000014 +#define PSC_AC97EVNT_OFFSET 0x00000018 +#define PSC_AC97TXRX_OFFSET 0x0000001c +#define PSC_AC97CDC_OFFSET 0x00000020 +#define PSC_AC97RST_OFFSET 0x00000024 +#define PSC_AC97GPO_OFFSET 0x00000028 +#define PSC_AC97GPI_OFFSET 0x0000002c + +#define AC97_PSC_SEL (AC97_PSC_BASE + PSC_SEL_OFFSET) +#define AC97_PSC_CTRL (AC97_PSC_BASE + PSC_CTRL_OFFSET) +#define PSC_AC97CFG (AC97_PSC_BASE + PSC_AC97CFG_OFFSET) +#define PSC_AC97MSK (AC97_PSC_BASE + PSC_AC97MSK_OFFSET) +#define PSC_AC97PCR (AC97_PSC_BASE + PSC_AC97PCR_OFFSET) +#define PSC_AC97STAT (AC97_PSC_BASE + PSC_AC97STAT_OFFSET) +#define PSC_AC97EVNT (AC97_PSC_BASE + PSC_AC97EVNT_OFFSET) +#define PSC_AC97TXRX (AC97_PSC_BASE + PSC_AC97TXRX_OFFSET) +#define PSC_AC97CDC (AC97_PSC_BASE + PSC_AC97CDC_OFFSET) +#define PSC_AC97RST (AC97_PSC_BASE + PSC_AC97RST_OFFSET) +#define PSC_AC97GPO (AC97_PSC_BASE + PSC_AC97GPO_OFFSET) +#define PSC_AC97GPI (AC97_PSC_BASE + PSC_AC97GPI_OFFSET) + +/* AC97 Config Register. */ +#define PSC_AC97CFG_RT_MASK (3 << 30) +#define PSC_AC97CFG_RT_FIFO1 (0 << 30) +#define PSC_AC97CFG_RT_FIFO2 (1 << 30) +#define PSC_AC97CFG_RT_FIFO4 (2 << 30) +#define PSC_AC97CFG_RT_FIFO8 (3 << 30) + +#define PSC_AC97CFG_TT_MASK (3 << 28) +#define PSC_AC97CFG_TT_FIFO1 (0 << 28) +#define PSC_AC97CFG_TT_FIFO2 (1 << 28) +#define PSC_AC97CFG_TT_FIFO4 (2 << 28) +#define PSC_AC97CFG_TT_FIFO8 (3 << 28) + +#define PSC_AC97CFG_DD_DISABLE (1 << 27) +#define PSC_AC97CFG_DE_ENABLE (1 << 26) +#define PSC_AC97CFG_SE_ENABLE (1 << 25) + +#define PSC_AC97CFG_LEN_MASK (0xf << 21) +#define PSC_AC97CFG_TXSLOT_MASK (0x3ff << 11) +#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1) +#define PSC_AC97CFG_GE_ENABLE (1) + +/* Enable slots 3-12. */ +#define PSC_AC97CFG_TXSLOT_ENA(x) (1 << (((x) - 3) + 11)) +#define PSC_AC97CFG_RXSLOT_ENA(x) (1 << (((x) - 3) + 1)) + +/* + * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately. + * The only sensible numbers are 7, 9, or possibly 11. Nah, just do the + * arithmetic in the macro. + */ +#define PSC_AC97CFG_SET_LEN(x) (((((x) - 2) / 2) & 0xf) << 21) +#define PSC_AC97CFG_GET_LEN(x) (((((x) >> 21) & 0xf) * 2) + 2) + +/* AC97 Mask Register. */ +#define PSC_AC97MSK_GR (1 << 25) +#define PSC_AC97MSK_CD (1 << 24) +#define PSC_AC97MSK_RR (1 << 13) +#define PSC_AC97MSK_RO (1 << 12) +#define PSC_AC97MSK_RU (1 << 11) +#define PSC_AC97MSK_TR (1 << 10) +#define PSC_AC97MSK_TO (1 << 9) +#define PSC_AC97MSK_TU (1 << 8) +#define PSC_AC97MSK_RD (1 << 5) +#define PSC_AC97MSK_TD (1 << 4) +#define PSC_AC97MSK_ALLMASK (PSC_AC97MSK_GR | PSC_AC97MSK_CD | \ + PSC_AC97MSK_RR | PSC_AC97MSK_RO | \ + PSC_AC97MSK_RU | PSC_AC97MSK_TR | \ + PSC_AC97MSK_TO | PSC_AC97MSK_TU | \ + PSC_AC97MSK_RD | PSC_AC97MSK_TD) + +/* AC97 Protocol Control Register. */ +#define PSC_AC97PCR_RC (1 << 6) +#define PSC_AC97PCR_RP (1 << 5) +#define PSC_AC97PCR_RS (1 << 4) +#define PSC_AC97PCR_TC (1 << 2) +#define PSC_AC97PCR_TP (1 << 1) +#define PSC_AC97PCR_TS (1 << 0) + +/* AC97 Status register (read only). */ +#define PSC_AC97STAT_CB (1 << 26) +#define PSC_AC97STAT_CP (1 << 25) +#define PSC_AC97STAT_CR (1 << 24) +#define PSC_AC97STAT_RF (1 << 13) +#define PSC_AC97STAT_RE (1 << 12) +#define PSC_AC97STAT_RR (1 << 11) +#define PSC_AC97STAT_TF (1 << 10) +#define PSC_AC97STAT_TE (1 << 9) +#define PSC_AC97STAT_TR (1 << 8) +#define PSC_AC97STAT_RB (1 << 5) +#define PSC_AC97STAT_TB (1 << 4) +#define PSC_AC97STAT_DI (1 << 2) +#define PSC_AC97STAT_DR (1 << 1) +#define PSC_AC97STAT_SR (1 << 0) + +/* AC97 Event Register. */ +#define PSC_AC97EVNT_GR (1 << 25) +#define PSC_AC97EVNT_CD (1 << 24) +#define PSC_AC97EVNT_RR (1 << 13) +#define PSC_AC97EVNT_RO (1 << 12) +#define PSC_AC97EVNT_RU (1 << 11) +#define PSC_AC97EVNT_TR (1 << 10) +#define PSC_AC97EVNT_TO (1 << 9) +#define PSC_AC97EVNT_TU (1 << 8) +#define PSC_AC97EVNT_RD (1 << 5) +#define PSC_AC97EVNT_TD (1 << 4) + +/* CODEC Command Register. */ +#define PSC_AC97CDC_RD (1 << 25) +#define PSC_AC97CDC_ID_MASK (3 << 23) +#define PSC_AC97CDC_INDX_MASK (0x7f << 16) +#define PSC_AC97CDC_ID(x) (((x) & 0x03) << 23) +#define PSC_AC97CDC_INDX(x) (((x) & 0x7f) << 16) + +/* AC97 Reset Control Register. */ +#define PSC_AC97RST_RST (1 << 1) +#define PSC_AC97RST_SNC (1 << 0) + +/* PSC in I2S Mode. */ +typedef struct psc_i2s { + u32 psc_sel; + u32 psc_ctrl; + u32 psc_i2scfg; + u32 psc_i2smsk; + u32 psc_i2spcr; + u32 psc_i2sstat; + u32 psc_i2sevent; + u32 psc_i2stxrx; + u32 psc_i2sudf; +} psc_i2s_t; + +#define PSC_I2SCFG_OFFSET 0x08 +#define PSC_I2SMASK_OFFSET 0x0C +#define PSC_I2SPCR_OFFSET 0x10 +#define PSC_I2SSTAT_OFFSET 0x14 +#define PSC_I2SEVENT_OFFSET 0x18 +#define PSC_I2SRXTX_OFFSET 0x1C +#define PSC_I2SUDF_OFFSET 0x20 + +/* I2S Config Register. */ +#define PSC_I2SCFG_RT_MASK (3 << 30) +#define PSC_I2SCFG_RT_FIFO1 (0 << 30) +#define PSC_I2SCFG_RT_FIFO2 (1 << 30) +#define PSC_I2SCFG_RT_FIFO4 (2 << 30) +#define PSC_I2SCFG_RT_FIFO8 (3 << 30) + +#define PSC_I2SCFG_TT_MASK (3 << 28) +#define PSC_I2SCFG_TT_FIFO1 (0 << 28) +#define PSC_I2SCFG_TT_FIFO2 (1 << 28) +#define PSC_I2SCFG_TT_FIFO4 (2 << 28) +#define PSC_I2SCFG_TT_FIFO8 (3 << 28) + +#define PSC_I2SCFG_DD_DISABLE (1 << 27) +#define PSC_I2SCFG_DE_ENABLE (1 << 26) +#define PSC_I2SCFG_SET_WS(x) (((((x) / 2) - 1) & 0x7f) << 16) +#define PSC_I2SCFG_WS(n) ((n & 0xFF) << 16) +#define PSC_I2SCFG_WS_MASK (PSC_I2SCFG_WS(0x3F)) +#define PSC_I2SCFG_WI (1 << 15) + +#define PSC_I2SCFG_DIV_MASK (3 << 13) +#define PSC_I2SCFG_DIV2 (0 << 13) +#define PSC_I2SCFG_DIV4 (1 << 13) +#define PSC_I2SCFG_DIV8 (2 << 13) +#define PSC_I2SCFG_DIV16 (3 << 13) + +#define PSC_I2SCFG_BI (1 << 12) +#define PSC_I2SCFG_BUF (1 << 11) +#define PSC_I2SCFG_MLJ (1 << 10) +#define PSC_I2SCFG_XM (1 << 9) + +/* The word length equation is simply LEN+1. */ +#define PSC_I2SCFG_SET_LEN(x) ((((x) - 1) & 0x1f) << 4) +#define PSC_I2SCFG_GET_LEN(x) ((((x) >> 4) & 0x1f) + 1) + +#define PSC_I2SCFG_LB (1 << 2) +#define PSC_I2SCFG_MLF (1 << 1) +#define PSC_I2SCFG_MS (1 << 0) + +/* I2S Mask Register. */ +#define PSC_I2SMSK_RR (1 << 13) +#define PSC_I2SMSK_RO (1 << 12) +#define PSC_I2SMSK_RU (1 << 11) +#define PSC_I2SMSK_TR (1 << 10) +#define PSC_I2SMSK_TO (1 << 9) +#define PSC_I2SMSK_TU (1 << 8) +#define PSC_I2SMSK_RD (1 << 5) +#define PSC_I2SMSK_TD (1 << 4) +#define PSC_I2SMSK_ALLMASK (PSC_I2SMSK_RR | PSC_I2SMSK_RO | \ + PSC_I2SMSK_RU | PSC_I2SMSK_TR | \ + PSC_I2SMSK_TO | PSC_I2SMSK_TU | \ + PSC_I2SMSK_RD | PSC_I2SMSK_TD) + +/* I2S Protocol Control Register. */ +#define PSC_I2SPCR_RC (1 << 6) +#define PSC_I2SPCR_RP (1 << 5) +#define PSC_I2SPCR_RS (1 << 4) +#define PSC_I2SPCR_TC (1 << 2) +#define PSC_I2SPCR_TP (1 << 1) +#define PSC_I2SPCR_TS (1 << 0) + +/* I2S Status register (read only). */ +#define PSC_I2SSTAT_RF (1 << 13) +#define PSC_I2SSTAT_RE (1 << 12) +#define PSC_I2SSTAT_RR (1 << 11) +#define PSC_I2SSTAT_TF (1 << 10) +#define PSC_I2SSTAT_TE (1 << 9) +#define PSC_I2SSTAT_TR (1 << 8) +#define PSC_I2SSTAT_RB (1 << 5) +#define PSC_I2SSTAT_TB (1 << 4) +#define PSC_I2SSTAT_DI (1 << 2) +#define PSC_I2SSTAT_DR (1 << 1) +#define PSC_I2SSTAT_SR (1 << 0) + +/* I2S Event Register. */ +#define PSC_I2SEVNT_RR (1 << 13) +#define PSC_I2SEVNT_RO (1 << 12) +#define PSC_I2SEVNT_RU (1 << 11) +#define PSC_I2SEVNT_TR (1 << 10) +#define PSC_I2SEVNT_TO (1 << 9) +#define PSC_I2SEVNT_TU (1 << 8) +#define PSC_I2SEVNT_RD (1 << 5) +#define PSC_I2SEVNT_TD (1 << 4) + +/* PSC in SPI Mode. */ +typedef struct psc_spi { + u32 psc_sel; + u32 psc_ctrl; + u32 psc_spicfg; + u32 psc_spimsk; + u32 psc_spipcr; + u32 psc_spistat; + u32 psc_spievent; + u32 psc_spitxrx; +} psc_spi_t; + +/* SPI Config Register. */ +#define PSC_SPICFG_RT_MASK (3 << 30) +#define PSC_SPICFG_RT_FIFO1 (0 << 30) +#define PSC_SPICFG_RT_FIFO2 (1 << 30) +#define PSC_SPICFG_RT_FIFO4 (2 << 30) +#define PSC_SPICFG_RT_FIFO8 (3 << 30) + +#define PSC_SPICFG_TT_MASK (3 << 28) +#define PSC_SPICFG_TT_FIFO1 (0 << 28) +#define PSC_SPICFG_TT_FIFO2 (1 << 28) +#define PSC_SPICFG_TT_FIFO4 (2 << 28) +#define PSC_SPICFG_TT_FIFO8 (3 << 28) + +#define PSC_SPICFG_DD_DISABLE (1 << 27) +#define PSC_SPICFG_DE_ENABLE (1 << 26) +#define PSC_SPICFG_CLR_BAUD(x) ((x) & ~((0x3f) << 15)) +#define PSC_SPICFG_SET_BAUD(x) (((x) & 0x3f) << 15) + +#define PSC_SPICFG_SET_DIV(x) (((x) & 0x03) << 13) +#define PSC_SPICFG_DIV2 0 +#define PSC_SPICFG_DIV4 1 +#define PSC_SPICFG_DIV8 2 +#define PSC_SPICFG_DIV16 3 + +#define PSC_SPICFG_BI (1 << 12) +#define PSC_SPICFG_PSE (1 << 11) +#define PSC_SPICFG_CGE (1 << 10) +#define PSC_SPICFG_CDE (1 << 9) + +#define PSC_SPICFG_CLR_LEN(x) ((x) & ~((0x1f) << 4)) +#define PSC_SPICFG_SET_LEN(x) (((x-1) & 0x1f) << 4) + +#define PSC_SPICFG_LB (1 << 3) +#define PSC_SPICFG_MLF (1 << 1) +#define PSC_SPICFG_MO (1 << 0) + +/* SPI Mask Register. */ +#define PSC_SPIMSK_MM (1 << 16) +#define PSC_SPIMSK_RR (1 << 13) +#define PSC_SPIMSK_RO (1 << 12) +#define PSC_SPIMSK_RU (1 << 11) +#define PSC_SPIMSK_TR (1 << 10) +#define PSC_SPIMSK_TO (1 << 9) +#define PSC_SPIMSK_TU (1 << 8) +#define PSC_SPIMSK_SD (1 << 5) +#define PSC_SPIMSK_MD (1 << 4) +#define PSC_SPIMSK_ALLMASK (PSC_SPIMSK_MM | PSC_SPIMSK_RR | \ + PSC_SPIMSK_RO | PSC_SPIMSK_TO | \ + PSC_SPIMSK_TU | PSC_SPIMSK_SD | \ + PSC_SPIMSK_MD) + +/* SPI Protocol Control Register. */ +#define PSC_SPIPCR_RC (1 << 6) +#define PSC_SPIPCR_SP (1 << 5) +#define PSC_SPIPCR_SS (1 << 4) +#define PSC_SPIPCR_TC (1 << 2) +#define PSC_SPIPCR_MS (1 << 0) + +/* SPI Status register (read only). */ +#define PSC_SPISTAT_RF (1 << 13) +#define PSC_SPISTAT_RE (1 << 12) +#define PSC_SPISTAT_RR (1 << 11) +#define PSC_SPISTAT_TF (1 << 10) +#define PSC_SPISTAT_TE (1 << 9) +#define PSC_SPISTAT_TR (1 << 8) +#define PSC_SPISTAT_SB (1 << 5) +#define PSC_SPISTAT_MB (1 << 4) +#define PSC_SPISTAT_DI (1 << 2) +#define PSC_SPISTAT_DR (1 << 1) +#define PSC_SPISTAT_SR (1 << 0) + +/* SPI Event Register. */ +#define PSC_SPIEVNT_MM (1 << 16) +#define PSC_SPIEVNT_RR (1 << 13) +#define PSC_SPIEVNT_RO (1 << 12) +#define PSC_SPIEVNT_RU (1 << 11) +#define PSC_SPIEVNT_TR (1 << 10) +#define PSC_SPIEVNT_TO (1 << 9) +#define PSC_SPIEVNT_TU (1 << 8) +#define PSC_SPIEVNT_SD (1 << 5) +#define PSC_SPIEVNT_MD (1 << 4) + +/* Transmit register control. */ +#define PSC_SPITXRX_LC (1 << 29) +#define PSC_SPITXRX_SR (1 << 28) + +/* PSC in SMBus (I2C) Mode. */ +typedef struct psc_smb { + u32 psc_sel; + u32 psc_ctrl; + u32 psc_smbcfg; + u32 psc_smbmsk; + u32 psc_smbpcr; + u32 psc_smbstat; + u32 psc_smbevnt; + u32 psc_smbtxrx; + u32 psc_smbtmr; +} psc_smb_t; + +/* SMBus Config Register. */ +#define PSC_SMBCFG_RT_MASK (3 << 30) +#define PSC_SMBCFG_RT_FIFO1 (0 << 30) +#define PSC_SMBCFG_RT_FIFO2 (1 << 30) +#define PSC_SMBCFG_RT_FIFO4 (2 << 30) +#define PSC_SMBCFG_RT_FIFO8 (3 << 30) + +#define PSC_SMBCFG_TT_MASK (3 << 28) +#define PSC_SMBCFG_TT_FIFO1 (0 << 28) +#define PSC_SMBCFG_TT_FIFO2 (1 << 28) +#define PSC_SMBCFG_TT_FIFO4 (2 << 28) +#define PSC_SMBCFG_TT_FIFO8 (3 << 28) + +#define PSC_SMBCFG_DD_DISABLE (1 << 27) +#define PSC_SMBCFG_DE_ENABLE (1 << 26) + +#define PSC_SMBCFG_SET_DIV(x) (((x) & 0x03) << 13) +#define PSC_SMBCFG_DIV2 0 +#define PSC_SMBCFG_DIV4 1 +#define PSC_SMBCFG_DIV8 2 +#define PSC_SMBCFG_DIV16 3 + +#define PSC_SMBCFG_GCE (1 << 9) +#define PSC_SMBCFG_SFM (1 << 8) + +#define PSC_SMBCFG_SET_SLV(x) (((x) & 0x7f) << 1) + +/* SMBus Mask Register. */ +#define PSC_SMBMSK_DN (1 << 30) +#define PSC_SMBMSK_AN (1 << 29) +#define PSC_SMBMSK_AL (1 << 28) +#define PSC_SMBMSK_RR (1 << 13) +#define PSC_SMBMSK_RO (1 << 12) +#define PSC_SMBMSK_RU (1 << 11) +#define PSC_SMBMSK_TR (1 << 10) +#define PSC_SMBMSK_TO (1 << 9) +#define PSC_SMBMSK_TU (1 << 8) +#define PSC_SMBMSK_SD (1 << 5) +#define PSC_SMBMSK_MD (1 << 4) +#define PSC_SMBMSK_ALLMASK (PSC_SMBMSK_DN | PSC_SMBMSK_AN | \ + PSC_SMBMSK_AL | PSC_SMBMSK_RR | \ + PSC_SMBMSK_RO | PSC_SMBMSK_TO | \ + PSC_SMBMSK_TU | PSC_SMBMSK_SD | \ + PSC_SMBMSK_MD) + +/* SMBus Protocol Control Register. */ +#define PSC_SMBPCR_DC (1 << 2) +#define PSC_SMBPCR_MS (1 << 0) + +/* SMBus Status register (read only). */ +#define PSC_SMBSTAT_BB (1 << 28) +#define PSC_SMBSTAT_RF (1 << 13) +#define PSC_SMBSTAT_RE (1 << 12) +#define PSC_SMBSTAT_RR (1 << 11) +#define PSC_SMBSTAT_TF (1 << 10) +#define PSC_SMBSTAT_TE (1 << 9) +#define PSC_SMBSTAT_TR (1 << 8) +#define PSC_SMBSTAT_SB (1 << 5) +#define PSC_SMBSTAT_MB (1 << 4) +#define PSC_SMBSTAT_DI (1 << 2) +#define PSC_SMBSTAT_DR (1 << 1) +#define PSC_SMBSTAT_SR (1 << 0) + +/* SMBus Event Register. */ +#define PSC_SMBEVNT_DN (1 << 30) +#define PSC_SMBEVNT_AN (1 << 29) +#define PSC_SMBEVNT_AL (1 << 28) +#define PSC_SMBEVNT_RR (1 << 13) +#define PSC_SMBEVNT_RO (1 << 12) +#define PSC_SMBEVNT_RU (1 << 11) +#define PSC_SMBEVNT_TR (1 << 10) +#define PSC_SMBEVNT_TO (1 << 9) +#define PSC_SMBEVNT_TU (1 << 8) +#define PSC_SMBEVNT_SD (1 << 5) +#define PSC_SMBEVNT_MD (1 << 4) +#define PSC_SMBEVNT_ALLCLR (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | \ + PSC_SMBEVNT_AL | PSC_SMBEVNT_RR | \ + PSC_SMBEVNT_RO | PSC_SMBEVNT_TO | \ + PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \ + PSC_SMBEVNT_MD) + +/* Transmit register control. */ +#define PSC_SMBTXRX_RSR (1 << 28) +#define PSC_SMBTXRX_STP (1 << 29) +#define PSC_SMBTXRX_DATAMASK 0xff + +/* SMBus protocol timers register. */ +#define PSC_SMBTMR_SET_TH(x) (((x) & 0x03) << 30) +#define PSC_SMBTMR_SET_PS(x) (((x) & 0x1f) << 25) +#define PSC_SMBTMR_SET_PU(x) (((x) & 0x1f) << 20) +#define PSC_SMBTMR_SET_SH(x) (((x) & 0x1f) << 15) +#define PSC_SMBTMR_SET_SU(x) (((x) & 0x1f) << 10) +#define PSC_SMBTMR_SET_CL(x) (((x) & 0x1f) << 5) +#define PSC_SMBTMR_SET_CH(x) (((x) & 0x1f) << 0) + +#endif /* _AU1000_PSC_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h new file mode 100644 index 000000000000..2dc61e009a08 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/gpio.h @@ -0,0 +1,69 @@ +#ifndef _AU1XXX_GPIO_H_ +#define _AU1XXX_GPIO_H_ + +#include + +#define AU1XXX_GPIO_BASE 200 + +struct au1x00_gpio2 { + u32 dir; + u32 reserved; + u32 output; + u32 pinstate; + u32 inten; + u32 enable; +}; + +extern int au1xxx_gpio_get_value(unsigned gpio); +extern void au1xxx_gpio_set_value(unsigned gpio, int value); +extern int au1xxx_gpio_direction_input(unsigned gpio); +extern int au1xxx_gpio_direction_output(unsigned gpio, int value); + + +/* Wrappers for the arch-neutral GPIO API */ + +static inline int gpio_request(unsigned gpio, const char *label) +{ + /* Not yet implemented */ + return 0; +} + +static inline void gpio_free(unsigned gpio) +{ + /* Not yet implemented */ +} + +static inline int gpio_direction_input(unsigned gpio) +{ + return au1xxx_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + return au1xxx_gpio_direction_output(gpio, value); +} + +static inline int gpio_get_value(unsigned gpio) +{ + return au1xxx_gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + au1xxx_gpio_set_value(gpio, value); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return gpio; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return irq; +} + +/* For cansleep */ +#include + +#endif /* _AU1XXX_GPIO_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/ioremap.h b/arch/mips/include/asm/mach-au1x00/ioremap.h new file mode 100644 index 000000000000..364cea2dc71f --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/ioremap.h @@ -0,0 +1,42 @@ +/* + * include/asm-mips/mach-au1x00/ioremap.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MACH_AU1X00_IOREMAP_H +#define __ASM_MACH_AU1X00_IOREMAP_H + +#include + +#ifdef CONFIG_64BIT_PHYS_ADDR +extern phys_t __fixup_bigphys_addr(phys_t, phys_t); +#else +static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} +#endif + +/* + * Allow physical addresses to be fixed up to help 36-bit peripherals. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return __fixup_bigphys_addr(phys_addr, size); +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return 0; +} + +#endif /* __ASM_MACH_AU1X00_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-au1x00/prom.h b/arch/mips/include/asm/mach-au1x00/prom.h new file mode 100644 index 000000000000..e38715577c51 --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/prom.h @@ -0,0 +1,13 @@ +#ifndef __AU1X00_PROM_H +#define __AU1X00_PROM_H + +extern int prom_argc; +extern char **prom_argv; +extern char **prom_envp; + +extern void prom_init_cmdline(void); +extern char *prom_getcmdline(void); +extern char *prom_getenv(char *envname); +extern int prom_get_ethernet_addr(char *ethernet_addr); + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/war.h b/arch/mips/include/asm/mach-au1x00/war.h new file mode 100644 index 000000000000..dd57d03d68ba --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_AU1X00_WAR_H +#define __ASM_MIPS_MACH_AU1X00_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_AU1X00_WAR_H */ diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h new file mode 100644 index 000000000000..d008f47a28bd --- /dev/null +++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2007 Aurelien Jarno + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __ASM_BCM47XX_H +#define __ASM_BCM47XX_H + +/* SSB bus */ +extern struct ssb_bus ssb_bcm47xx; + +#endif /* __ASM_BCM47XX_H */ diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h new file mode 100644 index 000000000000..cfc8f4d618ce --- /dev/null +++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h @@ -0,0 +1,59 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Aurelien Jarno + */ + +#ifndef __BCM47XX_GPIO_H +#define __BCM47XX_GPIO_H + +#define BCM47XX_EXTIF_GPIO_LINES 5 +#define BCM47XX_CHIPCO_GPIO_LINES 16 + +extern int bcm47xx_gpio_to_irq(unsigned gpio); +extern int bcm47xx_gpio_get_value(unsigned gpio); +extern void bcm47xx_gpio_set_value(unsigned gpio, int value); +extern int bcm47xx_gpio_direction_input(unsigned gpio); +extern int bcm47xx_gpio_direction_output(unsigned gpio, int value); + +static inline int gpio_request(unsigned gpio, const char *label) +{ + return 0; +} + +static inline void gpio_free(unsigned gpio) +{ +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return bcm47xx_gpio_to_irq(gpio); +} + +static inline int gpio_get_value(unsigned gpio) +{ + return bcm47xx_gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + bcm47xx_gpio_set_value(gpio, value); +} + +static inline int gpio_direction_input(unsigned gpio) +{ + return bcm47xx_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + return bcm47xx_gpio_direction_output(gpio, value); +} + + +/* cansleep wrappers */ +#include + +#endif /* __BCM47XX_GPIO_H */ diff --git a/arch/mips/include/asm/mach-bcm47xx/war.h b/arch/mips/include/asm/mach-bcm47xx/war.h new file mode 100644 index 000000000000..4a2b7986b582 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm47xx/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_BCM947XX_WAR_H +#define __ASM_MIPS_MACH_BCM947XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_BCM947XX_WAR_H */ diff --git a/arch/mips/include/asm/mach-cobalt/cobalt.h b/arch/mips/include/asm/mach-cobalt/cobalt.h new file mode 100644 index 000000000000..5b9fce73f11d --- /dev/null +++ b/arch/mips/include/asm/mach-cobalt/cobalt.h @@ -0,0 +1,22 @@ +/* + * The Cobalt board ID information. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997 Cobalt Microserver + * Copyright (C) 1997, 2003 Ralf Baechle + * Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv) + */ +#ifndef __ASM_COBALT_H +#define __ASM_COBALT_H + +extern int cobalt_board_id; + +#define COBALT_BRD_ID_QUBE1 0x3 +#define COBALT_BRD_ID_RAQ1 0x4 +#define COBALT_BRD_ID_QUBE2 0x5 +#define COBALT_BRD_ID_RAQ2 0x6 + +#endif /* __ASM_COBALT_H */ diff --git a/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h new file mode 100644 index 000000000000..b3314cf53194 --- /dev/null +++ b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h @@ -0,0 +1,56 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006, 07 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_COBALT_CPU_FEATURE_OVERRIDES_H +#define __ASM_COBALT_CPU_FEATURE_OVERRIDES_H + + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_fpu 1 +#define cpu_has_32fpr 1 +#define cpu_has_counter 1 +#define cpu_has_watch 0 +#define cpu_has_divec 1 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 0 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_inclusive_pcaches 0 +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 +#define cpu_scache_line_size() 0 + +#ifdef CONFIG_64BIT +#define cpu_has_llsc 0 +#else +#define cpu_has_llsc 1 +#endif + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_icache_snoops_remote_store 0 +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_COBALT_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h new file mode 100644 index 000000000000..57c8c9ac5851 --- /dev/null +++ b/arch/mips/include/asm/mach-cobalt/irq.h @@ -0,0 +1,57 @@ +/* + * Cobalt IRQ definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997 Cobalt Microserver + * Copyright (C) 1997, 2003 Ralf Baechle + * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv) + * Copyright (C) 2007 Yoichi Yuasa + */ +#ifndef _ASM_COBALT_IRQ_H +#define _ASM_COBALT_IRQ_H + +/* + * i8259 interrupts used on Cobalt: + * + * 8 - RTC + * 9 - PCI slot + * 14 - IDE0 + * 15 - IDE1(no connector on board) + */ +#define I8259A_IRQ_BASE 0 + +#define PCISLOT_IRQ (I8259A_IRQ_BASE + 9) + +/* + * CPU interrupts used on Cobalt: + * + * 0 - Software interrupt 0 (unused) + * 1 - Software interrupt 0 (unused) + * 2 - cascade GT64111 + * 3 - ethernet or SCSI host controller + * 4 - ethernet + * 5 - 16550 UART + * 6 - cascade i8259 + * 7 - CP0 counter + */ +#define MIPS_CPU_IRQ_BASE 16 + +#define GT641XX_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 2) +#define RAQ2_SCSI_IRQ (MIPS_CPU_IRQ_BASE + 3) +#define ETH0_IRQ (MIPS_CPU_IRQ_BASE + 3) +#define QUBE1_ETH0_IRQ (MIPS_CPU_IRQ_BASE + 4) +#define ETH1_IRQ (MIPS_CPU_IRQ_BASE + 4) +#define SERIAL_IRQ (MIPS_CPU_IRQ_BASE + 5) +#define SCSI_IRQ (MIPS_CPU_IRQ_BASE + 5) +#define I8259_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 6) + +#define GT641XX_IRQ_BASE 24 + +#include + +#define NR_IRQS (GT641XX_PCI_INT3_IRQ + 1) + +#endif /* _ASM_COBALT_IRQ_H */ diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h new file mode 100644 index 000000000000..ae9c5523c7ef --- /dev/null +++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2006 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef _COBALT_MACH_GT64120_H +#define _COBALT_MACH_GT64120_H + +/* + * Cobalt uses GT64111. GT64111 is almost the same as GT64120. + */ + +#define GT64120_BASE CKSEG1ADDR(GT_DEF_BASE) + +#endif /* _COBALT_MACH_GT64120_H */ diff --git a/arch/mips/include/asm/mach-cobalt/war.h b/arch/mips/include/asm/mach-cobalt/war.h new file mode 100644 index 000000000000..97884fd18ac0 --- /dev/null +++ b/arch/mips/include/asm/mach-cobalt/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_COBALT_WAR_H +#define __ASM_MIPS_MACH_COBALT_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_COBALT_WAR_H */ diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h new file mode 100644 index 000000000000..27f26102b1bb --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/db1200.h @@ -0,0 +1,230 @@ +/* + * AMD Alchemy DBAu1200 Reference Board + * Board register defines. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_DB1200_H +#define __ASM_DB1200_H + +#include +#include + +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX + +/* + * SPI and SMB are muxed on the DBAu1200 board. + * Refer to board documentation. + */ +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* + * AC'97 and I2S are muxed on the DBAu1200 board. + * Refer to board documentation. + */ +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define I2S_PSC_BASE PSC1_BASE_ADDR + +#define BCSR_KSEG1_ADDR 0xB9800000 + +typedef volatile struct +{ + /*00*/ u16 whoami; + u16 reserved0; + /*04*/ u16 status; + u16 reserved1; + /*08*/ u16 switches; + u16 reserved2; + /*0C*/ u16 resets; + u16 reserved3; + + /*10*/ u16 pcmcia; + u16 reserved4; + /*14*/ u16 board; + u16 reserved5; + /*18*/ u16 disk_leds; + u16 reserved6; + /*1C*/ u16 system; + u16 reserved7; + + /*20*/ u16 intclr; + u16 reserved8; + /*24*/ u16 intset; + u16 reserved9; + /*28*/ u16 intclr_mask; + u16 reserved10; + /*2C*/ u16 intset_mask; + u16 reserved11; + + /*30*/ u16 sig_status; + u16 reserved12; + /*34*/ u16 int_status; + u16 reserved13; + /*38*/ u16 reserved14; + u16 reserved15; + /*3C*/ u16 reserved16; + u16 reserved17; + +} BCSR; + +static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + +/* + * Register bit definitions for the BCSRs + */ +#define BCSR_WHOAMI_DCID 0x000F +#define BCSR_WHOAMI_CPLD 0x00F0 +#define BCSR_WHOAMI_BOARD 0x0F00 + +#define BCSR_STATUS_PCMCIA0VS 0x0003 +#define BCSR_STATUS_PCMCIA1VS 0x000C +#define BCSR_STATUS_SWAPBOOT 0x0040 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_IDECBLID 0x0200 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 + +#define BCSR_SWITCHES_OCTAL 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + +#define BCSR_RESETS_ETH 0x0001 +#define BCSR_RESETS_CAMERA 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_IDE 0x0008 +#define BCSR_RESETS_TV 0x0010 +/* Not resets but in the same register */ +#define BCSR_RESETS_PWMR1MUX 0x0800 +#define BCSR_RESETS_PCS0MUX 0x1000 +#define BCSR_RESETS_PCS1MUX 0x2000 +#define BCSR_RESETS_SPISEL 0x4000 + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + +#define BCSR_BOARD_LCDVEE 0x0001 +#define BCSR_BOARD_LCDVDD 0x0002 +#define BCSR_BOARD_LCDBL 0x0004 +#define BCSR_BOARD_CAMSNAP 0x0010 +#define BCSR_BOARD_CAMPWR 0x0020 +#define BCSR_BOARD_SD0PWR 0x0040 + +#define BCSR_LEDS_DECIMALS 0x0003 +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + +#define BCSR_SYSTEM_POWEROFF 0x4000 +#define BCSR_SYSTEM_RESET 0x8000 + +/* Bit positions for the different interrupt sources */ +#define BCSR_INT_IDE 0x0001 +#define BCSR_INT_ETH 0x0002 +#define BCSR_INT_PC0 0x0004 +#define BCSR_INT_PC0STSCHG 0x0008 +#define BCSR_INT_PC1 0x0010 +#define BCSR_INT_PC1STSCHG 0x0020 +#define BCSR_INT_DC 0x0040 +#define BCSR_INT_FLASHBUSY 0x0080 +#define BCSR_INT_PC0INSERT 0x0100 +#define BCSR_INT_PC0EJECT 0x0200 +#define BCSR_INT_PC1INSERT 0x0400 +#define BCSR_INT_PC1EJECT 0x0800 +#define BCSR_INT_SD0INSERT 0x1000 +#define BCSR_INT_SD0EJECT 0x2000 + +#define SMC91C111_PHYS_ADDR 0x19000300 +#define SMC91C111_INT DB1200_ETH_INT + +#define IDE_PHYS_ADDR 0x18800000 +#define IDE_REG_SHIFT 5 +#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) +#define IDE_INT DB1200_IDE_INT +#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 +#define IDE_RQSIZE 128 + +#define NAND_PHYS_ADDR 0x20000000 + +/* + * External Interrupts for DBAu1200 as of 8/6/2004. + * Bit positions in the CPLD registers can be calculated by taking + * the interrupt define and subtracting the DB1200_INT_BEGIN value. + * + * Example: IDE bis pos is = 64 - 64 + * ETH bit pos is = 65 - 64 + */ +enum external_pb1200_ints { + DB1200_INT_BEGIN = AU1000_MAX_INTR + 1, + + DB1200_IDE_INT = DB1200_INT_BEGIN, + DB1200_ETH_INT, + DB1200_PC0_INT, + DB1200_PC0_STSCHG_INT, + DB1200_PC1_INT, + DB1200_PC1_STSCHG_INT, + DB1200_DC_INT, + DB1200_FLASHBUSY_INT, + DB1200_PC0_INSERT_INT, + DB1200_PC0_EJECT_INT, + DB1200_PC1_INSERT_INT, + DB1200_PC1_EJECT_INT, + DB1200_SD0_INSERT_INT, + DB1200_SD0_EJECT_INT, + + DB1200_INT_END = DB1200_INT_BEGIN + 15, +}; + + +/* + * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c + */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) + +#define BOARD_PC0_INT DB1200_PC0_INT +#define BOARD_PC1_INT DB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) + +/* NAND chip select */ +#define NAND_CS 1 + +#endif /* __ASM_DB1200_H */ diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h new file mode 100644 index 000000000000..1a515b8c870f --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/db1x00.h @@ -0,0 +1,179 @@ +/* + * AMD Alchemy DBAu1x00 Reference Boards + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_DB1X00_H +#define __ASM_DB1X00_H + +#include + +#ifdef CONFIG_MIPS_DB1550 + +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX + +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define SMBUS_PSC_BASE PSC2_BASE_ADDR +#define I2S_PSC_BASE PSC3_BASE_ADDR + +#define BCSR_KSEG1_ADDR 0xAF000000 +#define NAND_PHYS_ADDR 0x20000000 + +#else +#define BCSR_KSEG1_ADDR 0xAE000000 +#endif + +/* + * Overlay data structure of the DBAu1x00 board registers. + * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx. + */ +typedef volatile struct +{ + /*00*/ unsigned short whoami; + unsigned short reserved0; + /*04*/ unsigned short status; + unsigned short reserved1; + /*08*/ unsigned short switches; + unsigned short reserved2; + /*0C*/ unsigned short resets; + unsigned short reserved3; + /*10*/ unsigned short pcmcia; + unsigned short reserved4; + /*14*/ unsigned short specific; + unsigned short reserved5; + /*18*/ unsigned short leds; + unsigned short reserved6; + /*1C*/ unsigned short swreset; + unsigned short reserved7; + +} BCSR; + + +/* + * Register/mask bit definitions for the BCSRs + */ +#define BCSR_WHOAMI_DCID 0x000F +#define BCSR_WHOAMI_CPLD 0x00F0 +#define BCSR_WHOAMI_BOARD 0x0F00 + +#define BCSR_STATUS_PC0VS 0x0003 +#define BCSR_STATUS_PC1VS 0x000C +#define BCSR_STATUS_PC0FI 0x0010 +#define BCSR_STATUS_PC1FI 0x0020 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_ROMBUSY 0x0400 +#define BCSR_STATUS_SWAPBOOT 0x2000 +#define BCSR_STATUS_FLASHDEN 0xC000 + +#define BCSR_SWITCHES_DIP 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + +#define BCSR_RESETS_PHY0 0x0001 +#define BCSR_RESETS_PHY1 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_FIR_SEL 0x2000 +#define BCSR_RESETS_IRDA_MODE_MASK 0xC000 +#define BCSR_RESETS_IRDA_MODE_FULL 0x0000 +#define BCSR_RESETS_IRDA_MODE_OFF 0x4000 +#define BCSR_RESETS_IRDA_MODE_2_3 0x8000 +#define BCSR_RESETS_IRDA_MODE_1_3 0xC000 + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + +#define BCSR_BOARD_PCIM66EN 0x0001 +#define BCSR_BOARD_SD0_PWR 0x0040 +#define BCSR_BOARD_SD1_PWR 0x0080 +#define BCSR_BOARD_PCIM33 0x0100 +#define BCSR_BOARD_GPIO200RST 0x0400 +#define BCSR_BOARD_PCICFG 0x1000 +#define BCSR_BOARD_SD0_WP 0x4000 +#define BCSR_BOARD_SD1_WP 0x8000 + +#define BCSR_LEDS_DECIMALS 0x0003 +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + +#define BCSR_SWRESET_RESET 0x0080 + +/* PCMCIA DBAu1x00 specific defines */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT)\ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) + +/* + * NAND defines + * + * Timing values as described in databook, * ns value stripped of the + * lower 2 bits. + * These defines are here rather than an Au1550 generic file because + * the parts chosen on another board may be different and may require + * different timings. + */ +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) + +/* Bitfield shift amounts */ +#define NAND_T_H_SHIFT 0 +#define NAND_T_PUL_SHIFT 4 +#define NAND_T_SU_SHIFT 8 +#define NAND_T_WH_SHIFT 12 + +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) +#define NAND_CS 1 + +/* Should be done by YAMON */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ + +#endif /* __ASM_DB1X00_H */ diff --git a/arch/mips/include/asm/mach-dec/mc146818rtc.h b/arch/mips/include/asm/mach-dec/mc146818rtc.h new file mode 100644 index 000000000000..6724e99e43e1 --- /dev/null +++ b/arch/mips/include/asm/mach-dec/mc146818rtc.h @@ -0,0 +1,43 @@ +/* + * RTC definitions for DECstation style attached Dallas DS1287 chip. + * + * Copyright (C) 1998, 2001 by Ralf Baechle + * Copyright (C) 1998 by Harald Koerfgen + * Copyright (C) 2002, 2005 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MIPS_DEC_RTC_DEC_H +#define __ASM_MIPS_DEC_RTC_DEC_H + +#include +#include +#include + +extern volatile u8 *dec_rtc_base; + +#define ARCH_RTC_LOCATION + +#define RTC_PORT(x) CPHYSADDR((long)dec_rtc_base) +#define RTC_IO_EXTENT dec_kn_slot_size +#define RTC_IOMAPPED 0 +#undef RTC_IRQ + +#define RTC_DEC_YEAR 0x3f /* Where we store the real year on DECs. */ + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + return dec_rtc_base[addr * 4]; +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + dec_rtc_base[addr * 4] = data; +} + +#define RTC_ALWAYS_BCD 0 + +#endif /* __ASM_MIPS_DEC_RTC_DEC_H */ diff --git a/arch/mips/include/asm/mach-dec/war.h b/arch/mips/include/asm/mach-dec/war.h new file mode 100644 index 000000000000..ca5e2ef909ad --- /dev/null +++ b/arch/mips/include/asm/mach-dec/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_DEC_WAR_H +#define __ASM_MIPS_MACH_DEC_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_DEC_WAR_H */ diff --git a/arch/mips/include/asm/mach-emma2rh/irq.h b/arch/mips/include/asm/mach-emma2rh/irq.h new file mode 100644 index 000000000000..5439eb856461 --- /dev/null +++ b/arch/mips/include/asm/mach-emma2rh/irq.h @@ -0,0 +1,15 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_MACH_EMMA2RH_IRQ_H +#define __ASM_MACH_EMMA2RH_IRQ_H + +#define NR_IRQS 256 + +#include_next + +#endif /* __ASM_MACH_EMMA2RH_IRQ_H */ diff --git a/arch/mips/include/asm/mach-emma2rh/war.h b/arch/mips/include/asm/mach-emma2rh/war.h new file mode 100644 index 000000000000..b660a4c30e6a --- /dev/null +++ b/arch/mips/include/asm/mach-emma2rh/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_EMMA2RH_WAR_H +#define __ASM_MIPS_MACH_EMMA2RH_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_EMMA2RH_WAR_H */ diff --git a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h new file mode 100644 index 000000000000..107104c3cd12 --- /dev/null +++ b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h @@ -0,0 +1,48 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 Thomas Koeller + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H + +/* + * Basler eXcite has an RM9122 processor. + */ +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_icache_snoops_remote_store 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_inclusive_pcaches 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 +#define cpu_scache_line_size() 32 + +#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-excite/excite.h b/arch/mips/include/asm/mach-excite/excite.h new file mode 100644 index 000000000000..4c29ba44992c --- /dev/null +++ b/arch/mips/include/asm/mach-excite/excite.h @@ -0,0 +1,154 @@ +#ifndef __EXCITE_H__ +#define __EXCITE_H__ + +#include +#include +#include + +#define EXCITE_CPU_EXT_CLOCK 100000000 + +#if !defined(__ASSEMBLY__) +void __init excite_kgdb_init(void); +void excite_procfs_init(void); +extern unsigned long memsize; +extern char modetty[]; +extern u32 unit_id; +#endif + +/* Base name for XICAP devices */ +#define XICAP_NAME "xicap_gpi" + +/* OCD register offsets */ +#define LKB0 0x0038 +#define LKB5 0x0128 +#define LKM5 0x012C +#define LKB7 0x0138 +#define LKM7 0x013c +#define LKB8 0x0140 +#define LKM8 0x0144 +#define LKB9 0x0148 +#define LKM9 0x014c +#define LKB10 0x0150 +#define LKM10 0x0154 +#define LKB11 0x0158 +#define LKM11 0x015c +#define LKB12 0x0160 +#define LKM12 0x0164 +#define LKB13 0x0168 +#define LKM13 0x016c +#define LDP0 0x0200 +#define LDP1 0x0210 +#define LDP2 0x0220 +#define LDP3 0x0230 +#define INTPIN0 0x0A40 +#define INTPIN1 0x0A44 +#define INTPIN2 0x0A48 +#define INTPIN3 0x0A4C +#define INTPIN4 0x0A50 +#define INTPIN5 0x0A54 +#define INTPIN6 0x0A58 +#define INTPIN7 0x0A5C + + + + +/* TITAN register offsets */ +#define CPRR 0x0004 +#define CPDSR 0x0008 +#define CPTC0R 0x000c +#define CPTC1R 0x0010 +#define CPCFG0 0x0020 +#define CPCFG1 0x0024 +#define CPDST0A 0x0028 +#define CPDST0B 0x002c +#define CPDST1A 0x0030 +#define CPDST1B 0x0034 +#define CPXDSTA 0x0038 +#define CPXDSTB 0x003c +#define CPXCISRA 0x0048 +#define CPXCISRB 0x004c +#define CPGIG0ER 0x0050 +#define CPGIG1ER 0x0054 +#define CPGRWL 0x0068 +#define CPURSLMT 0x00f8 +#define UACFG 0x0200 +#define UAINTS 0x0204 +#define SDRXFCIE 0x4828 +#define SDTXFCIE 0x4928 +#define INTP0Status0 0x1B00 +#define INTP0Mask0 0x1B04 +#define INTP0Set0 0x1B08 +#define INTP0Clear0 0x1B0C +#define GXCFG 0x5000 +#define GXDMADRPFX 0x5018 +#define GXDMA_DESCADR 0x501c +#define GXCH0TDESSTRT 0x5054 + +/* IRQ definitions */ +#define NMICONFIG 0xac0 +#define TITAN_MSGINT 0xc4 +#define TITAN_IRQ ((TITAN_MSGINT / 0x20) + 2) +#define FPGA0_MSGINT 0x5a +#define FPGA0_IRQ ((FPGA0_MSGINT / 0x20) + 2) +#define FPGA1_MSGINT 0x7b +#define FPGA1_IRQ ((FPGA1_MSGINT / 0x20) + 2) +#define PHY_MSGINT 0x9c +#define PHY_IRQ ((PHY_MSGINT / 0x20) + 2) + +#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE) +/* Pre-release units used interrupt pin #9 */ +#define USB_IRQ 11 +#else +/* Re-designed units use interrupt pin #1 */ +#define USB_MSGINT 0x39 +#define USB_IRQ ((USB_MSGINT / 0x20) + 2) +#endif +#define TIMER_IRQ 12 + + +/* Device address ranges */ +#define EXCITE_OFFS_OCD 0x1fffc000 +#define EXCITE_SIZE_OCD (16 * 1024) +#define EXCITE_PHYS_OCD CPHYSADDR(EXCITE_OFFS_OCD) +#define EXCITE_ADDR_OCD CKSEG1ADDR(EXCITE_OFFS_OCD) + +#define EXCITE_OFFS_SCRAM 0x1fffa000 +#define EXCITE_SIZE_SCRAM (8 << 10) +#define EXCITE_PHYS_SCRAM CPHYSADDR(EXCITE_OFFS_SCRAM) +#define EXCITE_ADDR_SCRAM CKSEG1ADDR(EXCITE_OFFS_SCRAM) + +#define EXCITE_OFFS_PCI_IO 0x1fff8000 +#define EXCITE_SIZE_PCI_IO (8 << 10) +#define EXCITE_PHYS_PCI_IO CPHYSADDR(EXCITE_OFFS_PCI_IO) +#define EXCITE_ADDR_PCI_IO CKSEG1ADDR(EXCITE_OFFS_PCI_IO) + +#define EXCITE_OFFS_TITAN 0x1fff0000 +#define EXCITE_SIZE_TITAN (32 << 10) +#define EXCITE_PHYS_TITAN CPHYSADDR(EXCITE_OFFS_TITAN) +#define EXCITE_ADDR_TITAN CKSEG1ADDR(EXCITE_OFFS_TITAN) + +#define EXCITE_OFFS_PCI_MEM 0x1ffe0000 +#define EXCITE_SIZE_PCI_MEM (64 << 10) +#define EXCITE_PHYS_PCI_MEM CPHYSADDR(EXCITE_OFFS_PCI_MEM) +#define EXCITE_ADDR_PCI_MEM CKSEG1ADDR(EXCITE_OFFS_PCI_MEM) + +#define EXCITE_OFFS_FPGA 0x1ffdc000 +#define EXCITE_SIZE_FPGA (16 << 10) +#define EXCITE_PHYS_FPGA CPHYSADDR(EXCITE_OFFS_FPGA) +#define EXCITE_ADDR_FPGA CKSEG1ADDR(EXCITE_OFFS_FPGA) + +#define EXCITE_OFFS_NAND 0x1ffd8000 +#define EXCITE_SIZE_NAND (16 << 10) +#define EXCITE_PHYS_NAND CPHYSADDR(EXCITE_OFFS_NAND) +#define EXCITE_ADDR_NAND CKSEG1ADDR(EXCITE_OFFS_NAND) + +#define EXCITE_OFFS_BOOTROM 0x1f000000 +#define EXCITE_SIZE_BOOTROM (8 << 20) +#define EXCITE_PHYS_BOOTROM CPHYSADDR(EXCITE_OFFS_BOOTROM) +#define EXCITE_ADDR_BOOTROM CKSEG1ADDR(EXCITE_OFFS_BOOTROM) + +/* FPGA address offsets */ +#define EXCITE_FPGA_DPR 0x0104 /* dual-ported ram */ +#define EXCITE_FPGA_SYSCTL 0x0200 /* system control register block */ + +#endif /* __EXCITE_H__ */ diff --git a/arch/mips/include/asm/mach-excite/excite_fpga.h b/arch/mips/include/asm/mach-excite/excite_fpga.h new file mode 100644 index 000000000000..0a1ef69bece7 --- /dev/null +++ b/arch/mips/include/asm/mach-excite/excite_fpga.h @@ -0,0 +1,80 @@ +#ifndef EXCITE_FPGA_H_INCLUDED +#define EXCITE_FPGA_H_INCLUDED + + +/** + * Address alignment of the individual FPGA bytes. + * The address arrangement of the individual bytes of the FPGA is two + * byte aligned at the embedded MK2 platform. + */ +#ifdef EXCITE_CCI_FPGA_MK2 +typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2))); +#else +typedef unsigned char excite_cci_fpga_align_t; +#endif + + +/** + * Size of Dual Ported RAM. + */ +#define EXCITE_DPR_SIZE 263 + + +/** + * Size of Reserved Status Fields in Dual Ported RAM. + */ +#define EXCITE_DPR_STATUS_SIZE 7 + + + +/** + * FPGA. + * Hardware register layout of the FPGA interface. The FPGA must accessed + * byte wise solely. + * @see EXCITE_CCI_DPR_MK2 + */ +typedef struct excite_fpga { + + /** + * Dual Ported RAM. + */ + excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE]; + + /** + * Status. + */ + excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE]; + +#ifdef EXCITE_CCI_FPGA_MK2 + /** + * RM9000 Interrupt. + * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite. + */ + excite_cci_fpga_align_t rm9k_int; +#else + /** + * MK2 Interrupt. + * Write access initiates interrupt at the ARM processor of the MK2. + */ + excite_cci_fpga_align_t mk2_int; + + excite_cci_fpga_align_t gap[0x1000-0x10f]; + + /** + * IRQ Source/Acknowledge. + */ + excite_cci_fpga_align_t rm9k_irq_src; + + /** + * IRQ Mask. + * Set bits enable the related interrupt. + */ + excite_cci_fpga_align_t rm9k_irq_mask; +#endif + + +} excite_fpga; + + + +#endif /* ndef EXCITE_FPGA_H_INCLUDED */ diff --git a/arch/mips/include/asm/mach-excite/excite_nandflash.h b/arch/mips/include/asm/mach-excite/excite_nandflash.h new file mode 100644 index 000000000000..c4cf6140622e --- /dev/null +++ b/arch/mips/include/asm/mach-excite/excite_nandflash.h @@ -0,0 +1,7 @@ +#ifndef __EXCITE_NANDFLASH_H__ +#define __EXCITE_NANDFLASH_H__ + +/* Resource names */ +#define EXCITE_NANDFLASH_RESOURCE_REGS "excite_nandflash_regs" + +#endif /* __EXCITE_NANDFLASH_H__ */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_eth.h b/arch/mips/include/asm/mach-excite/rm9k_eth.h new file mode 100644 index 000000000000..94705a46f72e --- /dev/null +++ b/arch/mips/include/asm/mach-excite/rm9k_eth.h @@ -0,0 +1,23 @@ +#if !defined(__RM9K_ETH_H__) +#define __RM9K_ETH_H__ + +#define RM9K_GE_NAME "rm9k_ge" + +/* Resource names */ +#define RM9K_GE_RESOURCE_MAC "rm9k_ge_mac" +#define RM9K_GE_RESOURCE_MSTAT "rm9k_ge_mstat" +#define RM9K_GE_RESOURCE_PKTPROC "rm9k_ge_pktproc" +#define RM9K_GE_RESOURCE_XDMA "rm9k_ge_xdma" +#define RM9K_GE_RESOURCE_FIFO_RX "rm9k_ge_fifo_rx" +#define RM9K_GE_RESOURCE_FIFO_TX "rm9k_ge_fifo_tx" +#define RM9K_GE_RESOURCE_FIFOMEM_RX "rm9k_ge_fifo_memory_rx" +#define RM9K_GE_RESOURCE_FIFOMEM_TX "rm9k_ge_fifo_memory_tx" +#define RM9K_GE_RESOURCE_PHY "rm9k_ge_phy" +#define RM9K_GE_RESOURCE_DMADESC_RX "rm9k_ge_dmadesc_rx" +#define RM9K_GE_RESOURCE_DMADESC_TX "rm9k_ge_dmadesc_tx" +#define RM9K_GE_RESOURCE_IRQ_MAIN "rm9k_ge_irq_main" +#define RM9K_GE_RESOURCE_IRQ_PHY "rm9k_ge_irq_phy" +#define RM9K_GE_RESOURCE_GPI_SLICE "rm9k_ge_gpi_slice" +#define RM9K_GE_RESOURCE_MDIO_CHANNEL "rm9k_ge_mdio_channel" + +#endif /* !defined(__RM9K_ETH_H__) */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_wdt.h b/arch/mips/include/asm/mach-excite/rm9k_wdt.h new file mode 100644 index 000000000000..3fa3c08d2da7 --- /dev/null +++ b/arch/mips/include/asm/mach-excite/rm9k_wdt.h @@ -0,0 +1,12 @@ +#ifndef __RM9K_WDT_H__ +#define __RM9K_WDT_H__ + +/* Device name */ +#define WDT_NAME "wdt_gpi" + +/* Resource names */ +#define WDT_RESOURCE_REGS "excite_watchdog_regs" +#define WDT_RESOURCE_IRQ "excite_watchdog_irq" +#define WDT_RESOURCE_COUNTER "excite_watchdog_counter" + +#endif /* __RM9K_WDT_H__ */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_xicap.h b/arch/mips/include/asm/mach-excite/rm9k_xicap.h new file mode 100644 index 000000000000..009577734a8d --- /dev/null +++ b/arch/mips/include/asm/mach-excite/rm9k_xicap.h @@ -0,0 +1,16 @@ +#ifndef __EXCITE_XICAP_H__ +#define __EXCITE_XICAP_H__ + + +/* Resource names */ +#define XICAP_RESOURCE_FIFO_RX "xicap_fifo_rx" +#define XICAP_RESOURCE_FIFO_TX "xicap_fifo_tx" +#define XICAP_RESOURCE_XDMA "xicap_xdma" +#define XICAP_RESOURCE_DMADESC "xicap_dmadesc" +#define XICAP_RESOURCE_PKTPROC "xicap_pktproc" +#define XICAP_RESOURCE_IRQ "xicap_irq" +#define XICAP_RESOURCE_GPI_SLICE "xicap_gpi_slice" +#define XICAP_RESOURCE_FIFO_BLK "xicap_fifo_blocks" +#define XICAP_RESOURCE_PKT_STREAM "xicap_pkt_stream" + +#endif /* __EXCITE_XICAP_H__ */ diff --git a/arch/mips/include/asm/mach-excite/war.h b/arch/mips/include/asm/mach-excite/war.h new file mode 100644 index 000000000000..1f82180c1598 --- /dev/null +++ b/arch/mips/include/asm/mach-excite/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H +#define __ASM_MIPS_MACH_EXCITE_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 1 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */ diff --git a/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h new file mode 100644 index 000000000000..7c185bb06f13 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h @@ -0,0 +1,13 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H + +/* Intentionally empty file ... */ + +#endif /* __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h new file mode 100644 index 000000000000..76e04e7feb84 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/dma-coherence.h @@ -0,0 +1,45 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + * + */ +#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H +#define __ASM_MACH_GENERIC_DMA_COHERENCE_H + +struct device; + +static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, + size_t size) +{ + return virt_to_phys(addr); +} + +static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, + struct page *page) +{ + return page_to_phys(page); +} + +static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return dma_addr; +} + +static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ +#ifdef CONFIG_DMA_COHERENT + return 1; +#endif +#ifdef CONFIG_DMA_NONCOHERENT + return 0; +#endif +} + +#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-generic/floppy.h b/arch/mips/include/asm/mach-generic/floppy.h new file mode 100644 index 000000000000..001a8ce17c17 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/floppy.h @@ -0,0 +1,139 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1998, 2003 by Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_FLOPPY_H +#define __ASM_MACH_GENERIC_FLOPPY_H + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +/* + * How to access the FDC's registers. + */ +static inline unsigned char fd_inb(unsigned int port) +{ + return inb_p(port); +} + +static inline void fd_outb(unsigned char value, unsigned int port) +{ + outb_p(value, port); +} + +/* + * How to access the floppy DMA functions. + */ +static inline void fd_enable_dma(void) +{ + enable_dma(FLOPPY_DMA); +} + +static inline void fd_disable_dma(void) +{ + disable_dma(FLOPPY_DMA); +} + +static inline int fd_request_dma(void) +{ + return request_dma(FLOPPY_DMA, "floppy"); +} + +static inline void fd_free_dma(void) +{ + free_dma(FLOPPY_DMA); +} + +static inline void fd_clear_dma_ff(void) +{ + clear_dma_ff(FLOPPY_DMA); +} + +static inline void fd_set_dma_mode(char mode) +{ + set_dma_mode(FLOPPY_DMA, mode); +} + +static inline void fd_set_dma_addr(char *addr) +{ + set_dma_addr(FLOPPY_DMA, (unsigned long) addr); +} + +static inline void fd_set_dma_count(unsigned int count) +{ + set_dma_count(FLOPPY_DMA, count); +} + +static inline int fd_get_dma_residue(void) +{ + return get_dma_residue(FLOPPY_DMA); +} + +static inline void fd_enable_irq(void) +{ + enable_irq(FLOPPY_IRQ); +} + +static inline void fd_disable_irq(void) +{ + disable_irq(FLOPPY_IRQ); +} + +static inline int fd_request_irq(void) +{ + return request_irq(FLOPPY_IRQ, floppy_interrupt, + IRQF_DISABLED, "floppy", NULL); +} + +static inline void fd_free_irq(void) +{ + free_irq(FLOPPY_IRQ, NULL); +} + +#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); + + +static inline unsigned long fd_getfdaddr1(void) +{ + return 0x3f0; +} + +static inline unsigned long fd_dma_mem_alloc(unsigned long size) +{ + unsigned long mem; + + mem = __get_dma_pages(GFP_KERNEL, get_order(size)); + + return mem; +} + +static inline void fd_dma_mem_free(unsigned long addr, unsigned long size) +{ + free_pages(addr, get_order(size)); +} + +static inline unsigned long fd_drive_type(unsigned long n) +{ + if (n == 0) + return 4; /* 3,5", 1.44mb */ + + return 0; +} + +#endif /* __ASM_MACH_GENERIC_FLOPPY_H */ diff --git a/arch/mips/include/asm/mach-generic/gpio.h b/arch/mips/include/asm/mach-generic/gpio.h new file mode 100644 index 000000000000..b4e70208da64 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/gpio.h @@ -0,0 +1,21 @@ +#ifndef __ASM_MACH_GENERIC_GPIO_H +#define __ASM_MACH_GENERIC_GPIO_H + +#ifdef CONFIG_GPIOLIB +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#else +int gpio_request(unsigned gpio, const char *label); +void gpio_free(unsigned gpio); +int gpio_direction_input(unsigned gpio); +int gpio_direction_output(unsigned gpio, int value); +int gpio_get_value(unsigned gpio); +void gpio_set_value(unsigned gpio, int value); +#endif +int gpio_to_irq(unsigned gpio); +int irq_to_gpio(unsigned irq); + +#include /* cansleep wrappers */ + +#endif /* __ASM_MACH_GENERIC_GPIO_H */ diff --git a/arch/mips/include/asm/mach-generic/ide.h b/arch/mips/include/asm/mach-generic/ide.h new file mode 100644 index 000000000000..73008f7bdc93 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/ide.h @@ -0,0 +1,167 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994-1996 Linus Torvalds & authors + * + * Copied from i386; many of the especially older MIPS or ISA-based platforms + * are basically identical. Using this file probably implies i8259 PIC + * support in a system but the very least interrupt numbers 0 - 15 need to + * be put aside for legacy devices. + */ +#ifndef __ASM_MACH_GENERIC_IDE_H +#define __ASM_MACH_GENERIC_IDE_H + +#ifdef __KERNEL__ + +#include +#include +#include + +static __inline__ int ide_probe_legacy(void) +{ +#ifdef CONFIG_PCI + struct pci_dev *dev; + /* + * This can be called on the ide_setup() path, super-early in + * boot. But the down_read() will enable local interrupts, + * which can cause some machines to crash. So here we detect + * and flag that situation and bail out early. + */ + if (no_pci_devices()) + return 0; + dev = pci_get_class(PCI_CLASS_BRIDGE_EISA << 8, NULL); + if (dev) + goto found; + dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL); + if (dev) + goto found; + return 0; +found: + pci_dev_put(dev); + return 1; +#elif defined(CONFIG_EISA) || defined(CONFIG_ISA) + return 1; +#else + return 0; +#endif +} + +/* MIPS port and memory-mapped I/O string operations. */ +static inline void __ide_flush_prologue(void) +{ +#ifdef CONFIG_SMP + if (cpu_has_dc_aliases) + preempt_disable(); +#endif +} + +static inline void __ide_flush_epilogue(void) +{ +#ifdef CONFIG_SMP + if (cpu_has_dc_aliases) + preempt_enable(); +#endif +} + +static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size) +{ + if (cpu_has_dc_aliases) { + unsigned long end = addr + size; + + while (addr < end) { + local_flush_data_cache_page((void *)addr); + addr += PAGE_SIZE; + } + } +} + +/* + * insw() and gang might be called with interrupts disabled, so we can't + * send IPIs for flushing due to the potencial of deadlocks, see the comment + * above smp_call_function() in arch/mips/kernel/smp.c. We work around the + * problem by disabling preemption so we know we actually perform the flush + * on the processor that actually has the lines to be flushed which hopefully + * is even better for performance anyway. + */ +static inline void __ide_insw(unsigned long port, void *addr, + unsigned int count) +{ + __ide_flush_prologue(); + insw(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 2); + __ide_flush_epilogue(); +} + +static inline void __ide_insl(unsigned long port, void *addr, unsigned int count) +{ + __ide_flush_prologue(); + insl(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 4); + __ide_flush_epilogue(); +} + +static inline void __ide_outsw(unsigned long port, const void *addr, + unsigned long count) +{ + __ide_flush_prologue(); + outsw(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 2); + __ide_flush_epilogue(); +} + +static inline void __ide_outsl(unsigned long port, const void *addr, + unsigned long count) +{ + __ide_flush_prologue(); + outsl(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 4); + __ide_flush_epilogue(); +} + +static inline void __ide_mm_insw(void __iomem *port, void *addr, u32 count) +{ + __ide_flush_prologue(); + readsw(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 2); + __ide_flush_epilogue(); +} + +static inline void __ide_mm_insl(void __iomem *port, void *addr, u32 count) +{ + __ide_flush_prologue(); + readsl(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 4); + __ide_flush_epilogue(); +} + +static inline void __ide_mm_outsw(void __iomem *port, void *addr, u32 count) +{ + __ide_flush_prologue(); + writesw(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 2); + __ide_flush_epilogue(); +} + +static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count) +{ + __ide_flush_prologue(); + writesl(port, addr, count); + __ide_flush_dcache_range((unsigned long)addr, count * 4); + __ide_flush_epilogue(); +} + +/* ide_insw calls insw, not __ide_insw. Why? */ +#undef insw +#undef insl +#undef outsw +#undef outsl +#define insw(port, addr, count) __ide_insw(port, addr, count) +#define insl(port, addr, count) __ide_insl(port, addr, count) +#define outsw(port, addr, count) __ide_outsw(port, addr, count) +#define outsl(port, addr, count) __ide_outsl(port, addr, count) + +#endif /* __KERNEL__ */ + +#endif /* __ASM_MACH_GENERIC_IDE_H */ diff --git a/arch/mips/include/asm/mach-generic/ioremap.h b/arch/mips/include/asm/mach-generic/ioremap.h new file mode 100644 index 000000000000..b379938d47f0 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/ioremap.h @@ -0,0 +1,34 @@ +/* + * include/asm-mips/mach-generic/ioremap.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MACH_GENERIC_IOREMAP_H +#define __ASM_MACH_GENERIC_IOREMAP_H + +#include + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return 0; +} + +#endif /* __ASM_MACH_GENERIC_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h new file mode 100644 index 000000000000..70d9a25132c5 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/irq.h @@ -0,0 +1,45 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_IRQ_H +#define __ASM_MACH_GENERIC_IRQ_H + +#ifndef NR_IRQS +#define NR_IRQS 128 +#endif + +#ifdef CONFIG_I8259 +#ifndef I8259A_IRQ_BASE +#define I8259A_IRQ_BASE 0 +#endif +#endif + +#ifdef CONFIG_IRQ_CPU + +#ifndef MIPS_CPU_IRQ_BASE +#ifdef CONFIG_I8259 +#define MIPS_CPU_IRQ_BASE 16 +#else +#define MIPS_CPU_IRQ_BASE 0 +#endif /* CONFIG_I8259 */ +#endif + +#ifdef CONFIG_IRQ_CPU_RM7K +#ifndef RM7K_CPU_IRQ_BASE +#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8) +#endif +#endif + +#ifdef CONFIG_IRQ_CPU_RM9K +#ifndef RM9K_CPU_IRQ_BASE +#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12) +#endif +#endif + +#endif /* CONFIG_IRQ_CPU */ + +#endif /* __ASM_MACH_GENERIC_IRQ_H */ diff --git a/arch/mips/include/asm/mach-generic/kernel-entry-init.h b/arch/mips/include/asm/mach-generic/kernel-entry-init.h new file mode 100644 index 000000000000..7e66505fa574 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/kernel-entry-init.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Embedded Alley Solutions, Inc + * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_GENERIC_KERNEL_ENTRY_H +#define __ASM_MACH_GENERIC_KERNEL_ENTRY_H + +/* Intentionally empty macro, used in head.S. Override in + * arch/mips/mach-xxx/kernel-entry-init.h when necessary. + */ +.macro kernel_entry_setup +.endm + +/* + * Do SMP slave processor setup necessary before we can savely execute C code. + */ + .macro smp_slave_setup + .endm + + +#endif /* __ASM_MACH_GENERIC_KERNEL_ENTRY_H */ diff --git a/arch/mips/include/asm/mach-generic/kmalloc.h b/arch/mips/include/asm/mach-generic/kmalloc.h new file mode 100644 index 000000000000..b8e6deba352f --- /dev/null +++ b/arch/mips/include/asm/mach-generic/kmalloc.h @@ -0,0 +1,13 @@ +#ifndef __ASM_MACH_GENERIC_KMALLOC_H +#define __ASM_MACH_GENERIC_KMALLOC_H + + +#ifndef CONFIG_DMA_COHERENT +/* + * Total overkill for most systems but need as a safe default. + * Set this one if any device in the system might do non-coherent DMA. + */ +#define ARCH_KMALLOC_MINALIGN 128 +#endif + +#endif /* __ASM_MACH_GENERIC_KMALLOC_H */ diff --git a/arch/mips/include/asm/mach-generic/mangle-port.h b/arch/mips/include/asm/mach-generic/mangle-port.h new file mode 100644 index 000000000000..f49dc990214b --- /dev/null +++ b/arch/mips/include/asm/mach-generic/mangle-port.h @@ -0,0 +1,52 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_MANGLE_PORT_H +#define __ASM_MACH_GENERIC_MANGLE_PORT_H + +#define __swizzle_addr_b(port) (port) +#define __swizzle_addr_w(port) (port) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +/* + * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware; + * less sane hardware forces software to fiddle with this... + * + * Regardless, if the host bus endianness mismatches that of PCI/ISA, then + * you can't have the numerical value of data and byte addresses within + * multibyte quantities both preserved at the same time. Hence two + * variations of functions: non-prefixed ones that preserve the value + * and prefixed ones that preserve byte addresses. The latters are + * typically used for moving raw data between a peripheral and memory (cf. + * string I/O functions), hence the "__mem_" prefix. + */ +#if defined(CONFIG_SWAP_IO_SPACE) + +# define ioswabb(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define ioswabw(a, x) le16_to_cpu(x) +# define __mem_ioswabw(a, x) (x) +# define ioswabl(a, x) le32_to_cpu(x) +# define __mem_ioswabl(a, x) (x) +# define ioswabq(a, x) le64_to_cpu(x) +# define __mem_ioswabq(a, x) (x) + +#else + +# define ioswabb(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define __mem_ioswabw(a, x) cpu_to_le16(x) +# define ioswabl(a, x) (x) +# define __mem_ioswabl(a, x) cpu_to_le32(x) +# define ioswabq(a, x) (x) +# define __mem_ioswabq(a, x) cpu_to_le32(x) + +#endif + +#endif /* __ASM_MACH_GENERIC_MANGLE_PORT_H */ diff --git a/arch/mips/include/asm/mach-generic/mc146818rtc.h b/arch/mips/include/asm/mach-generic/mc146818rtc.h new file mode 100644 index 000000000000..0b9a942f079d --- /dev/null +++ b/arch/mips/include/asm/mach-generic/mc146818rtc.h @@ -0,0 +1,36 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03 by Ralf Baechle + * + * RTC routines for PC style attached Dallas chip. + */ +#ifndef __ASM_MACH_GENERIC_MC146818RTC_H +#define __ASM_MACH_GENERIC_MC146818RTC_H + +#include + +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_IRQ 8 + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + return inb_p(RTC_PORT(1)); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + outb_p(data, RTC_PORT(1)); +} + +#define RTC_ALWAYS_BCD 1 + +#ifndef mc146818_decode_year +#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) +#endif + +#endif /* __ASM_MACH_GENERIC_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h new file mode 100644 index 000000000000..c9fa4b14968d --- /dev/null +++ b/arch/mips/include/asm/mach-generic/spaces.h @@ -0,0 +1,85 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_MACH_GENERIC_SPACES_H +#define _ASM_MACH_GENERIC_SPACES_H + +#include + +/* + * This gives the physical RAM offset. + */ +#ifndef PHYS_OFFSET +#define PHYS_OFFSET _AC(0, UL) +#endif + +#ifdef CONFIG_32BIT + +#define CAC_BASE _AC(0x80000000, UL) +#define IO_BASE _AC(0xa0000000, UL) +#define UNCAC_BASE _AC(0xa0000000, UL) + +#ifndef MAP_BASE +#define MAP_BASE _AC(0xc0000000, UL) +#endif + +/* + * Memory above this physical address will be considered highmem. + */ +#ifndef HIGHMEM_START +#define HIGHMEM_START _AC(0x20000000, UL) +#endif + +#endif /* CONFIG_32BIT */ + +#ifdef CONFIG_64BIT + +#ifndef CAC_BASE +#ifdef CONFIG_DMA_NONCOHERENT +#define CAC_BASE _AC(0x9800000000000000, UL) +#else +#define CAC_BASE _AC(0xa800000000000000, UL) +#endif +#endif + +#ifndef IO_BASE +#define IO_BASE _AC(0x9000000000000000, UL) +#endif + +#ifndef UNCAC_BASE +#define UNCAC_BASE _AC(0x9000000000000000, UL) +#endif + +#ifndef MAP_BASE +#define MAP_BASE _AC(0xc000000000000000, UL) +#endif + +/* + * Memory above this physical address will be considered highmem. + * Fixme: 59 bits is a fictive number and makes assumptions about processors + * in the distant future. Nobody will care for a few years :-) + */ +#ifndef HIGHMEM_START +#define HIGHMEM_START (_AC(1, UL) << _AC(59, UL)) +#endif + +#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK)) +#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK)) +#define TO_UNCAC(x) (UNCAC_BASE | ((x) & TO_PHYS_MASK)) + +#endif /* CONFIG_64BIT */ + +/* + * This handles the memory map. + */ +#ifndef PAGE_OFFSET +#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET) +#endif + +#endif /* __ASM_MACH_GENERIC_SPACES_H */ diff --git a/arch/mips/include/asm/mach-generic/topology.h b/arch/mips/include/asm/mach-generic/topology.h new file mode 100644 index 000000000000..5428f333a02c --- /dev/null +++ b/arch/mips/include/asm/mach-generic/topology.h @@ -0,0 +1 @@ +#include diff --git a/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h new file mode 100644 index 000000000000..9c8735158da1 --- /dev/null +++ b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h @@ -0,0 +1,44 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 07 Ralf Baechle + */ +#ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H + +/* + * IP22 with a variety of processors so we can't use defaults for everything. + */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +#define cpu_has_fpu 1 +#define cpu_has_32fpr 1 +#define cpu_has_counter 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_cache_cdex_p 1 +#define cpu_has_prefetch 0 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 /* Needs to change for R8000 */ +#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) +#define cpu_has_ic_fills_f_dc 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-ip22/ds1286.h b/arch/mips/include/asm/mach-ip22/ds1286.h new file mode 100644 index 000000000000..f19f1eafbc71 --- /dev/null +++ b/arch/mips/include/asm/mach-ip22/ds1286.h @@ -0,0 +1,18 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03 by Ralf Baechle + * + * RTC routines for PC style attached Dallas chip. + */ +#ifndef __ASM_MACH_IP22_DS1286_H +#define __ASM_MACH_IP22_DS1286_H + +#include + +#define rtc_read(reg) (hpc3c0->rtcregs[(reg)] & 0xff) +#define rtc_write(data, reg) do { hpc3c0->rtcregs[(reg)] = (data); } while(0) + +#endif /* __ASM_MACH_IP22_DS1286_H */ diff --git a/arch/mips/include/asm/mach-ip22/spaces.h b/arch/mips/include/asm/mach-ip22/spaces.h new file mode 100644 index 000000000000..7f9fa6f66059 --- /dev/null +++ b/arch/mips/include/asm/mach-ip22/spaces.h @@ -0,0 +1,27 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_MACH_IP22_SPACES_H +#define _ASM_MACH_IP22_SPACES_H + + +#ifdef CONFIG_64BIT + +#define PAGE_OFFSET 0xffffffff80000000UL + +#define CAC_BASE 0xffffffff80000000 +#define IO_BASE 0xffffffffa0000000 +#define UNCAC_BASE 0xffffffffa0000000 +#define MAP_BASE 0xc000000000000000 + +#endif /* CONFIG_64BIT */ + +#include + +#endif /* __ASM_MACH_IP22_SPACES_H */ diff --git a/arch/mips/include/asm/mach-ip22/war.h b/arch/mips/include/asm/mach-ip22/war.h new file mode 100644 index 000000000000..a44fa9656a82 --- /dev/null +++ b/arch/mips/include/asm/mach-ip22/war.h @@ -0,0 +1,29 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_IP22_WAR_H +#define __ASM_MIPS_MACH_IP22_WAR_H + +/* + * R4600 CPU modules for the Indy come with both V1.7 and V2.0 processors. + */ + +#define R4600_V1_INDEX_ICACHEOP_WAR 1 +#define R4600_V1_HIT_CACHEOP_WAR 1 +#define R4600_V2_HIT_CACHEOP_WAR 1 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_IP22_WAR_H */ diff --git a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h new file mode 100644 index 000000000000..7d3112b148d9 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h @@ -0,0 +1,54 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 07 Ralf Baechle + */ +#ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H + +/* + * IP27 only comes with R10000 family processors all using the same config + */ +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_icache_snoops_remote_store 1 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_6k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_8k_cache 0 +#define cpu_has_tx39_cache 0 + +#define cpu_has_inclusive_pcaches 1 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 64 +#define cpu_scache_line_size() 128 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h new file mode 100644 index 000000000000..ed7e6222dc15 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + * + */ +#ifndef __ASM_MACH_IP27_DMA_COHERENCE_H +#define __ASM_MACH_IP27_DMA_COHERENCE_H + +#include + +#define pdev_to_baddr(pdev, addr) \ + (BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr)) +#define dev_to_baddr(dev, addr) \ + pdev_to_baddr(to_pci_dev(dev), (addr)) + +struct device; + +static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, + size_t size) +{ + dma_addr_t pa = dev_to_baddr(dev, virt_to_phys(addr)); + + return pa; +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + dma_addr_t pa = dev_to_baddr(dev, page_to_phys(page)); + + return pa; +} + +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return dma_addr & ~(0xffUL << 56); +} + +static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 1; /* IP27 non-cohernet mode is unsupported */ +} + +#endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-ip27/irq.h b/arch/mips/include/asm/mach-ip27/irq.h new file mode 100644 index 000000000000..cf4384bfa846 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/irq.h @@ -0,0 +1,22 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999, 2000, 01, 02, 03 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2001 Kanoj Sarcar + */ +#ifndef __ASM_MACH_IP27_IRQ_H +#define __ASM_MACH_IP27_IRQ_H + +/* + * A hardwired interrupt number is completly stupid for this system - a + * large configuration might have thousands if not tenthousands of + * interrupts. + */ +#define NR_IRQS 256 + +#include_next + +#endif /* __ASM_MACH_IP27_IRQ_H */ diff --git a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h new file mode 100644 index 000000000000..624d66c7f290 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h @@ -0,0 +1,59 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Silicon Graphics, Inc. + * Copyright (C) 2005 Ralf Baechle + */ +#ifndef __ASM_MACH_IP27_KERNEL_ENTRY_H +#define __ASM_MACH_IP27_KERNEL_ENTRY_H + +#include +#include +#include + +/* + * Returns the local nasid into res. + */ + .macro GET_NASID_ASM res + dli \res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID) + ld \res, (\res) + and \res, NSRI_NODEID_MASK + dsrl \res, NSRI_NODEID_SHFT + .endm + +/* + * Intentionally empty macro, used in head.S. Override in + * arch/mips/mach-xxx/kernel-entry-init.h when necessary. + */ + .macro kernel_entry_setup + GET_NASID_ASM t1 + move t2, t1 # text and data are here + MAPPED_KERNEL_SETUP_TLB + .endm + +/* + * Do SMP slave processor setup necessary before we can savely execute C code. + */ + .macro smp_slave_setup + GET_NASID_ASM t1 + dli t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \ + KLDIR_OFF_POINTER + CAC_BASE + dsll t1, NASID_SHFT + or t0, t0, t1 + ld t0, 0(t0) # t0 points to kern_vars struct + lh t1, KV_RO_NASID_OFFSET(t0) + lh t2, KV_RW_NASID_OFFSET(t0) + MAPPED_KERNEL_SETUP_TLB + + /* + * We might not get launched at the address the kernel is linked to, + * so we jump there. + */ + PTR_LA t0, 0f + jr t0 +0: + .endm + +#endif /* __ASM_MACH_IP27_KERNEL_ENTRY_H */ diff --git a/arch/mips/include/asm/mach-ip27/kmalloc.h b/arch/mips/include/asm/mach-ip27/kmalloc.h new file mode 100644 index 000000000000..426bd049b2d7 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/kmalloc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_MACH_IP27_KMALLOC_H +#define __ASM_MACH_IP27_KMALLOC_H + +/* + * All happy, no need to define ARCH_KMALLOC_MINALIGN + */ + +#endif /* __ASM_MACH_IP27_KMALLOC_H */ diff --git a/arch/mips/include/asm/mach-ip27/mangle-port.h b/arch/mips/include/asm/mach-ip27/mangle-port.h new file mode 100644 index 000000000000..f6e4912ea062 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/mangle-port.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Ralf Baechle + */ +#ifndef __ASM_MACH_IP27_MANGLE_PORT_H +#define __ASM_MACH_IP27_MANGLE_PORT_H + +#define __swizzle_addr_b(port) (port) +#define __swizzle_addr_w(port) ((port) ^ 2) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +# define ioswabb(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define __mem_ioswabw(a, x) cpu_to_le16(x) +# define ioswabl(a, x) (x) +# define __mem_ioswabl(a, x) cpu_to_le32(x) +# define ioswabq(a, x) (x) +# define __mem_ioswabq(a, x) cpu_to_le32(x) + +#endif /* __ASM_MACH_IP27_MANGLE_PORT_H */ diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h new file mode 100644 index 000000000000..986a3b9b59a7 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/mmzone.h @@ -0,0 +1,36 @@ +#ifndef _ASM_MACH_MMZONE_H +#define _ASM_MACH_MMZONE_H + +#include +#include +#include + +#define pa_to_nid(addr) NASID_TO_COMPACT_NODEID(NASID_GET(addr)) + +#define LEVELS_PER_SLICE 128 + +struct slice_data { + unsigned long irq_enable_mask[2]; + int level_to_irq[LEVELS_PER_SLICE]; +}; + +struct hub_data { + kern_vars_t kern_vars; + DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW); + cpumask_t h_cpus; + unsigned long slice_map; + unsigned long irq_alloc_mask[2]; + struct slice_data slice[2]; +}; + +struct node_data { + struct pglist_data pglist; + struct hub_data hub; +}; + +extern struct node_data *__node_data[]; + +#define NODE_DATA(n) (&__node_data[(n)]->pglist) +#define hub_data(n) (&__node_data[(n)]->hub) + +#endif /* _ASM_MACH_MMZONE_H */ diff --git a/arch/mips/include/asm/mach-ip27/spaces.h b/arch/mips/include/asm/mach-ip27/spaces.h new file mode 100644 index 000000000000..b18802a0b17e --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/spaces.h @@ -0,0 +1,30 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 99 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999 by Silicon Graphics, Inc. + */ +#ifndef _ASM_MACH_IP27_SPACES_H +#define _ASM_MACH_IP27_SPACES_H + +/* + * IP27 uses the R10000's uncached attribute feature. Attribute 3 selects + * uncached memory addressing. + */ + +#define HSPEC_BASE 0x9000000000000000 +#define IO_BASE 0x9200000000000000 +#define MSPEC_BASE 0x9400000000000000 +#define UNCAC_BASE 0x9600000000000000 + +#define TO_MSPEC(x) (MSPEC_BASE | ((x) & TO_PHYS_MASK)) +#define TO_HSPEC(x) (HSPEC_BASE | ((x) & TO_PHYS_MASK)) + +#define HIGHMEM_START (~0UL) + +#include + +#endif /* _ASM_MACH_IP27_SPACES_H */ diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h new file mode 100644 index 000000000000..7785bec732f2 --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/topology.h @@ -0,0 +1,59 @@ +#ifndef _ASM_MACH_TOPOLOGY_H +#define _ASM_MACH_TOPOLOGY_H 1 + +#include +#include +#include + +struct cpuinfo_ip27 { +// cpuid_t p_cpuid; /* PROM assigned cpuid */ + cnodeid_t p_nodeid; /* my node ID in compact-id-space */ + nasid_t p_nasid; /* my node ID in numa-as-id-space */ + unsigned char p_slice; /* Physical position on node board */ +#if 0 + unsigned long loops_per_sec; + unsigned long ipi_count; + unsigned long irq_attempt[NR_IRQS]; + unsigned long smp_local_irq_count; + unsigned long prof_multiplier; + unsigned long prof_counter; +#endif +}; + +extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS]; + +#define cpu_to_node(cpu) (sn_cpu_info[(cpu)].p_nodeid) +#define parent_node(node) (node) +#define node_to_cpumask(node) (hub_data(node)->h_cpus) +#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node))) +struct pci_bus; +extern int pcibus_to_node(struct pci_bus *); + +#define pcibus_to_cpumask(bus) (cpu_online_map) + +extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; + +#define node_distance(from, to) (__node_distances[(from)][(to)]) + +/* sched_domains SD_NODE_INIT for SGI IP27 machines */ +#define SD_NODE_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .child = NULL, \ + .groups = NULL, \ + .min_interval = 8, \ + .max_interval = 32, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_EXEC \ + | SD_WAKE_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ + .nr_balance_failed = 0, \ +} + +#include + +#endif /* _ASM_MACH_TOPOLOGY_H */ diff --git a/arch/mips/include/asm/mach-ip27/war.h b/arch/mips/include/asm/mach-ip27/war.h new file mode 100644 index 000000000000..e2ddcc9b1fff --- /dev/null +++ b/arch/mips/include/asm/mach-ip27/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_IP27_WAR_H +#define __ASM_MIPS_MACH_IP27_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 1 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_IP27_WAR_H */ diff --git a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h new file mode 100644 index 000000000000..9a53b326f848 --- /dev/null +++ b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Ralf Baechle + * 6/2004 pf + */ +#ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H + +/* + * IP28 only comes with R10000 family processors all using the same config + */ +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 /* see probe_pcache() */ +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_icache_snoops_remote_store 1 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 + +#define cpu_has_inclusive_pcaches 1 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 64 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-ip28/ds1286.h b/arch/mips/include/asm/mach-ip28/ds1286.h new file mode 100644 index 000000000000..471bb9a33e0f --- /dev/null +++ b/arch/mips/include/asm/mach-ip28/ds1286.h @@ -0,0 +1,4 @@ +#ifndef __ASM_MACH_IP28_DS1286_H +#define __ASM_MACH_IP28_DS1286_H +#include +#endif /* __ASM_MACH_IP28_DS1286_H */ diff --git a/arch/mips/include/asm/mach-ip28/spaces.h b/arch/mips/include/asm/mach-ip28/spaces.h new file mode 100644 index 000000000000..05aabb27e5e7 --- /dev/null +++ b/arch/mips/include/asm/mach-ip28/spaces.h @@ -0,0 +1,22 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. + * 2004 pf + */ +#ifndef _ASM_MACH_IP28_SPACES_H +#define _ASM_MACH_IP28_SPACES_H + +#define CAC_BASE 0xa800000000000000 + +#define HIGHMEM_START (~0UL) + +#define PHYS_OFFSET _AC(0x20000000, UL) + +#include + +#endif /* _ASM_MACH_IP28_SPACES_H */ diff --git a/arch/mips/include/asm/mach-ip28/war.h b/arch/mips/include/asm/mach-ip28/war.h new file mode 100644 index 000000000000..a1baafab486a --- /dev/null +++ b/arch/mips/include/asm/mach-ip28/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_IP28_WAR_H +#define __ASM_MIPS_MACH_IP28_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 1 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_IP28_WAR_H */ diff --git a/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h new file mode 100644 index 000000000000..6782fccebe8d --- /dev/null +++ b/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Ilya A. Volynets-Evenbakh + * Copyright (C) 2005, 07 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H + + +/* + * R5000 has an interesting "restriction": ll(d)/sc(d) + * instructions to XKPHYS region simply do uncached bus + * requests. This breaks all the atomic bitops functions. + * so, for 64bit IP32 kernel we just don't use ll/sc. + * This does not affect luserland. + */ +#if (defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_NEVADA)) && defined(CONFIG_64BIT) +#define cpu_has_llsc 0 +#else +#define cpu_has_llsc 1 +#endif + +/* Settings which are common for all ip32 CPUs */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_fpu 1 +#define cpu_has_32fpr 1 +#define cpu_has_counter 1 +#define cpu_has_mips16 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_4k_cache 1 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h new file mode 100644 index 000000000000..a5511ebb2d53 --- /dev/null +++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h @@ -0,0 +1,72 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + * + */ +#ifndef __ASM_MACH_IP32_DMA_COHERENCE_H +#define __ASM_MACH_IP32_DMA_COHERENCE_H + +#include + +struct device; + +/* + * Few notes. + * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M + * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for + * native-endian) + * 3. All other devices see memory as one big chunk at 0x40000000 + * 4. Non-PCI devices will pass NULL as struct device* + * + * Thus we translate differently, depending on device. + */ + +#define RAM_OFFSET_MASK 0x3fffffffUL + +static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, + size_t size) +{ + dma_addr_t pa = virt_to_phys(addr) & RAM_OFFSET_MASK; + + if (dev == NULL) + pa += CRIME_HI_MEM_BASE; + + return pa; +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + dma_addr_t pa; + + pa = page_to_phys(page) & RAM_OFFSET_MASK; + + if (dev == NULL) + pa += CRIME_HI_MEM_BASE; + + return pa; +} + +/* This is almost certainly wrong but it's what dma-ip32.c used to use */ +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + unsigned long addr = dma_addr & RAM_OFFSET_MASK; + + if (dma_addr >= 256*1024*1024) + addr += CRIME_HI_MEM_BASE; + + return addr; +} + +static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; /* IP32 is non-cohernet */ +} + +#endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-ip32/kmalloc.h b/arch/mips/include/asm/mach-ip32/kmalloc.h new file mode 100644 index 000000000000..b1e0be60f720 --- /dev/null +++ b/arch/mips/include/asm/mach-ip32/kmalloc.h @@ -0,0 +1,11 @@ +#ifndef __ASM_MACH_IP32_KMALLOC_H +#define __ASM_MACH_IP32_KMALLOC_H + + +#if defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_RM7000) +#define ARCH_KMALLOC_MINALIGN 32 +#else +#define ARCH_KMALLOC_MINALIGN 128 +#endif + +#endif /* __ASM_MACH_IP32_KMALLOC_H */ diff --git a/arch/mips/include/asm/mach-ip32/mangle-port.h b/arch/mips/include/asm/mach-ip32/mangle-port.h new file mode 100644 index 000000000000..f1d0f1756a9f --- /dev/null +++ b/arch/mips/include/asm/mach-ip32/mangle-port.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Ladislav Michl + * Copyright (C) 2004 Ralf Baechle + */ +#ifndef __ASM_MACH_IP32_MANGLE_PORT_H +#define __ASM_MACH_IP32_MANGLE_PORT_H + +#define __swizzle_addr_b(port) ((port) ^ 3) +#define __swizzle_addr_w(port) ((port) ^ 2) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +# define ioswabb(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define __mem_ioswabw(a, x) cpu_to_le16(x) +# define ioswabl(a, x) (x) +# define __mem_ioswabl(a, x) cpu_to_le32(x) +# define ioswabq(a, x) (x) +# define __mem_ioswabq(a, x) cpu_to_le32(x) + +#endif /* __ASM_MACH_IP32_MANGLE_PORT_H */ diff --git a/arch/mips/include/asm/mach-ip32/mc146818rtc.h b/arch/mips/include/asm/mach-ip32/mc146818rtc.h new file mode 100644 index 000000000000..c28ba8d84076 --- /dev/null +++ b/arch/mips/include/asm/mach-ip32/mc146818rtc.h @@ -0,0 +1,36 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03 by Ralf Baechle + * Copyright (C) 2000 Harald Koerfgen + * + * RTC routines for IP32 style attached Dallas chip. + */ +#ifndef __ASM_MACH_IP32_MC146818RTC_H +#define __ASM_MACH_IP32_MC146818RTC_H + +#include + +#define RTC_PORT(x) (0x70 + (x)) + +static unsigned char CMOS_READ(unsigned long addr) +{ + return mace->isa.rtc[addr << 8]; +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + mace->isa.rtc[addr << 8] = data; +} + +/* + * FIXME: Do it right. For now just assume that noone lives in 20th century + * and no O2 user in 22th century ;-) + */ +#define mc146818_decode_year(year) ((year) + 2000) + +#define RTC_ALWAYS_BCD 0 + +#endif /* __ASM_MACH_IP32_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-ip32/war.h b/arch/mips/include/asm/mach-ip32/war.h new file mode 100644 index 000000000000..d194056dcd7a --- /dev/null +++ b/arch/mips/include/asm/mach-ip32/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_IP32_WAR_H +#define __ASM_MIPS_MACH_IP32_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_IP32_WAR_H */ diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h new file mode 100644 index 000000000000..d66979a124a8 --- /dev/null +++ b/arch/mips/include/asm/mach-jazz/dma-coherence.h @@ -0,0 +1,40 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + */ +#ifndef __ASM_MACH_JAZZ_DMA_COHERENCE_H +#define __ASM_MACH_JAZZ_DMA_COHERENCE_H + +#include + +struct device; + +static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + return vdma_alloc(virt_to_phys(addr), size); +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + return vdma_alloc(page_to_phys(page), PAGE_SIZE); +} + +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return vdma_log2phys(dma_addr); +} + +static void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ + vdma_free(dma_addr); +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; +} + +#endif /* __ASM_MACH_JAZZ_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-jazz/floppy.h b/arch/mips/include/asm/mach-jazz/floppy.h new file mode 100644 index 000000000000..56e9ca6ae426 --- /dev/null +++ b/arch/mips/include/asm/mach-jazz/floppy.h @@ -0,0 +1,135 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2003 by Ralf Baechle + */ +#ifndef __ASM_MACH_JAZZ_FLOPPY_H +#define __ASM_MACH_JAZZ_FLOPPY_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static inline unsigned char fd_inb(unsigned int port) +{ + unsigned char c; + + c = *(volatile unsigned char *) port; + udelay(1); + + return c; +} + +static inline void fd_outb(unsigned char value, unsigned int port) +{ + *(volatile unsigned char *) port = value; +} + +/* + * How to access the floppy DMA functions. + */ +static inline void fd_enable_dma(void) +{ + vdma_enable(JAZZ_FLOPPY_DMA); +} + +static inline void fd_disable_dma(void) +{ + vdma_disable(JAZZ_FLOPPY_DMA); +} + +static inline int fd_request_dma(void) +{ + return 0; +} + +static inline void fd_free_dma(void) +{ +} + +static inline void fd_clear_dma_ff(void) +{ +} + +static inline void fd_set_dma_mode(char mode) +{ + vdma_set_mode(JAZZ_FLOPPY_DMA, mode); +} + +static inline void fd_set_dma_addr(char *a) +{ + vdma_set_addr(JAZZ_FLOPPY_DMA, vdma_phys2log(CPHYSADDR((unsigned long)a))); +} + +static inline void fd_set_dma_count(unsigned int count) +{ + vdma_set_count(JAZZ_FLOPPY_DMA, count); +} + +static inline int fd_get_dma_residue(void) +{ + return vdma_get_residue(JAZZ_FLOPPY_DMA); +} + +static inline void fd_enable_irq(void) +{ +} + +static inline void fd_disable_irq(void) +{ +} + +static inline int fd_request_irq(void) +{ + return request_irq(FLOPPY_IRQ, floppy_interrupt, + IRQF_DISABLED, "floppy", NULL); +} + +static inline void fd_free_irq(void) +{ + free_irq(FLOPPY_IRQ, NULL); +} + +static inline unsigned long fd_getfdaddr1(void) +{ + return JAZZ_FDC_BASE; +} + +static inline unsigned long fd_dma_mem_alloc(unsigned long size) +{ + unsigned long mem; + + mem = __get_dma_pages(GFP_KERNEL, get_order(size)); + if(!mem) + return 0; + vdma_alloc(CPHYSADDR(mem), size); /* XXX error checking */ + + return mem; +} + +static inline void fd_dma_mem_free(unsigned long addr, unsigned long size) +{ + vdma_free(vdma_phys2log(CPHYSADDR(addr))); + free_pages(addr, get_order(size)); +} + +static inline unsigned long fd_drive_type(unsigned long n) +{ + /* XXX This is wrong for machines with ED 2.88mb disk drives like the + Olivetti M700. Anyway, we should suck this from the ARC + firmware. */ + if (n == 0) + return 4; /* 3,5", 1.44mb */ + + return 0; +} + +#endif /* __ASM_MACH_JAZZ_FLOPPY_H */ diff --git a/arch/mips/include/asm/mach-jazz/mc146818rtc.h b/arch/mips/include/asm/mach-jazz/mc146818rtc.h new file mode 100644 index 000000000000..987f727afe25 --- /dev/null +++ b/arch/mips/include/asm/mach-jazz/mc146818rtc.h @@ -0,0 +1,38 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03 by Ralf Baechle + * Copyright (C) 2007 Thomas Bogendoerfer + * + * RTC routines for Jazz style attached Dallas chip. + */ +#ifndef __ASM_MACH_JAZZ_MC146818RTC_H +#define __ASM_MACH_JAZZ_MC146818RTC_H + +#include + +#include +#include + +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_IRQ 8 + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + return *(volatile char *)JAZZ_RTC_BASE; +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + *(volatile char *)JAZZ_RTC_BASE = data; +} + +#define RTC_ALWAYS_BCD 0 + +#define mc146818_decode_year(year) ((year) + 1980) + +#endif /* __ASM_MACH_JAZZ_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-jazz/war.h b/arch/mips/include/asm/mach-jazz/war.h new file mode 100644 index 000000000000..6158ee861bfd --- /dev/null +++ b/arch/mips/include/asm/mach-jazz/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_JAZZ_WAR_H +#define __ASM_MIPS_MACH_JAZZ_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_JAZZ_WAR_H */ diff --git a/arch/mips/include/asm/mach-lasat/irq.h b/arch/mips/include/asm/mach-lasat/irq.h new file mode 100644 index 000000000000..3a282419d5f9 --- /dev/null +++ b/arch/mips/include/asm/mach-lasat/irq.h @@ -0,0 +1,13 @@ +#ifndef _ASM_MACH_LASAT_IRQ_H +#define _ASM_MACH_LASAT_IRQ_H + +#define LASAT_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 2) + +#define LASAT_IRQ_BASE 8 +#define LASAT_IRQ_END 23 + +#define NR_IRQS 24 + +#include_next + +#endif /* _ASM_MACH_LASAT_IRQ_H */ diff --git a/arch/mips/include/asm/mach-lasat/mach-gt64120.h b/arch/mips/include/asm/mach-lasat/mach-gt64120.h new file mode 100644 index 000000000000..1a9ad45cc135 --- /dev/null +++ b/arch/mips/include/asm/mach-lasat/mach-gt64120.h @@ -0,0 +1,27 @@ +/* + * This is a direct copy of the ev96100.h file, with a global + * search and replace. The numbers are the same. + * + * The reason I'm duplicating this is so that the 64120/96100 + * defines won't be confusing in the source code. + */ +#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H +#define _ASM_GT64120_LASAT_GT64120_DEP_H + +/* + * GT64120 config space base address on Lasat 100 + */ +#define GT64120_BASE (KSEG1ADDR(0x14000000)) + +/* + * PCI Bus allocation + * + * (Guessing ...) + */ +#define GT_PCI_MEM_BASE 0x12000000UL +#define GT_PCI_MEM_SIZE 0x02000000UL +#define GT_PCI_IO_BASE 0x10000000UL +#define GT_PCI_IO_SIZE 0x02000000UL +#define GT_ISA_IO_BASE PCI_IO_BASE + +#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */ diff --git a/arch/mips/include/asm/mach-lasat/war.h b/arch/mips/include/asm/mach-lasat/war.h new file mode 100644 index 000000000000..bb1e0325c9be --- /dev/null +++ b/arch/mips/include/asm/mach-lasat/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_LASAT_WAR_H +#define __ASM_MIPS_MACH_LASAT_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_LASAT_WAR_H */ diff --git a/arch/mips/include/asm/mach-lemote/dma-coherence.h b/arch/mips/include/asm/mach-lemote/dma-coherence.h new file mode 100644 index 000000000000..7e914777ebc4 --- /dev/null +++ b/arch/mips/include/asm/mach-lemote/dma-coherence.h @@ -0,0 +1,42 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006, 07 Ralf Baechle + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + */ +#ifndef __ASM_MACH_LEMOTE_DMA_COHERENCE_H +#define __ASM_MACH_LEMOTE_DMA_COHERENCE_H + +struct device; + +static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, + size_t size) +{ + return virt_to_phys(addr) | 0x80000000; +} + +static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, + struct page *page) +{ + return page_to_phys(page) | 0x80000000; +} + +static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return dma_addr & 0x7fffffff; +} + +static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; +} + +#endif /* __ASM_MACH_LEMOTE_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-lemote/mc146818rtc.h b/arch/mips/include/asm/mach-lemote/mc146818rtc.h new file mode 100644 index 000000000000..ed5147e11085 --- /dev/null +++ b/arch/mips/include/asm/mach-lemote/mc146818rtc.h @@ -0,0 +1,36 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org) + * + * RTC routines for PC style attached Dallas chip. + */ +#ifndef __ASM_MACH_LEMOTE_MC146818RTC_H +#define __ASM_MACH_LEMOTE_MC146818RTC_H + +#include + +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_IRQ 8 + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + return inb_p(RTC_PORT(1)); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + outb_p(data, RTC_PORT(1)); +} + +#define RTC_ALWAYS_BCD 0 + +#ifndef mc146818_decode_year +#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970) +#endif + +#endif /* __ASM_MACH_LEMOTE_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-lemote/war.h b/arch/mips/include/asm/mach-lemote/war.h new file mode 100644 index 000000000000..05f89e0f2a11 --- /dev/null +++ b/arch/mips/include/asm/mach-lemote/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_LEMOTE_WAR_H +#define __ASM_MIPS_MACH_LEMOTE_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_LEMOTE_WAR_H */ diff --git a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h new file mode 100644 index 000000000000..7f3e3f9bd23a --- /dev/null +++ b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h @@ -0,0 +1,72 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Chris Dearman + * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H + + +/* + * CPU feature overrides for MIPS boards + */ +#ifdef CONFIG_CPU_MIPS32 +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +/* #define cpu_has_fpu ? */ +/* #define cpu_has_32fpr ? */ +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +#define cpu_has_divec 1 +#define cpu_has_vce 0 +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +#define cpu_has_mcheck 1 +/* #define cpu_has_ejtag ? */ +#ifdef CONFIG_CPU_HAS_LLSC +#define cpu_has_llsc 1 +#else +#define cpu_has_llsc 0 +#endif +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +#define cpu_has_nofpuex 0 +/* #define cpu_has_64bits ? */ +/* #define cpu_has_64bit_zero_reg ? */ +/* #define cpu_has_inclusive_pcaches ? */ +#define cpu_icache_snoops_remote_store 1 +#endif + +#ifdef CONFIG_CPU_MIPS64 +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +/* #define cpu_has_fpu ? */ +/* #define cpu_has_32fpr ? */ +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +#define cpu_has_divec 1 +#define cpu_has_vce 0 +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +#define cpu_has_mcheck 1 +/* #define cpu_has_ejtag ? */ +#define cpu_has_llsc 1 +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +#define cpu_has_nofpuex 0 +/* #define cpu_has_64bits ? */ +/* #define cpu_has_64bit_zero_reg ? */ +/* #define cpu_has_inclusive_pcaches ? */ +#define cpu_icache_snoops_remote_store 1 +#endif + +#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-malta/irq.h b/arch/mips/include/asm/mach-malta/irq.h new file mode 100644 index 000000000000..9b9da26683c2 --- /dev/null +++ b/arch/mips/include/asm/mach-malta/irq.h @@ -0,0 +1,9 @@ +#ifndef __ASM_MACH_MIPS_IRQ_H +#define __ASM_MACH_MIPS_IRQ_H + + +#define NR_IRQS 256 + +#include_next + +#endif /* __ASM_MACH_MIPS_IRQ_H */ diff --git a/arch/mips/include/asm/mach-malta/kernel-entry-init.h b/arch/mips/include/asm/mach-malta/kernel-entry-init.h new file mode 100644 index 000000000000..0b793e7bf67e --- /dev/null +++ b/arch/mips/include/asm/mach-malta/kernel-entry-init.h @@ -0,0 +1,52 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Chris Dearman (chris@mips.com) + * Copyright (C) 2007 Mips Technologies, Inc. + */ +#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H +#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H + + .macro kernel_entry_setup +#ifdef CONFIG_MIPS_MT_SMTC + mfc0 t0, CP0_CONFIG + bgez t0, 9f + mfc0 t0, CP0_CONFIG, 1 + bgez t0, 9f + mfc0 t0, CP0_CONFIG, 2 + bgez t0, 9f + mfc0 t0, CP0_CONFIG, 3 + and t0, 1<<2 + bnez t0, 0f +9: + /* Assume we came from YAMON... */ + PTR_LA v0, 0x9fc00534 /* YAMON print */ + lw v0, (v0) + move a0, zero + PTR_LA a1, nonmt_processor + jal v0 + + PTR_LA v0, 0x9fc00520 /* YAMON exit */ + lw v0, (v0) + li a0, 1 + jal v0 + +1: b 1b + + __INITDATA +nonmt_processor: + .asciz "SMTC kernel requires the MT ASE to run\n" + __FINIT +0: +#endif + .endm + +/* + * Do SMP slave processor setup necessary before we can safely execute C code. + */ + .macro smp_slave_setup + .endm + +#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */ diff --git a/arch/mips/include/asm/mach-malta/mach-gt64120.h b/arch/mips/include/asm/mach-malta/mach-gt64120.h new file mode 100644 index 000000000000..0f863148f3b6 --- /dev/null +++ b/arch/mips/include/asm/mach-malta/mach-gt64120.h @@ -0,0 +1,19 @@ +/* + * This is a direct copy of the ev96100.h file, with a global + * search and replace. The numbers are the same. + * + * The reason I'm duplicating this is so that the 64120/96100 + * defines won't be confusing in the source code. + */ +#ifndef _ASM_MACH_MIPS_MACH_GT64120_DEP_H +#define _ASM_MACH_MIPS_MACH_GT64120_DEP_H + +#define MIPS_GT_BASE 0x1be00000 + +extern unsigned long _pcictrl_gt64120; +/* + * GT64120 config space base address + */ +#define GT64120_BASE _pcictrl_gt64120 + +#endif /* _ASM_MACH_MIPS_MACH_GT64120_DEP_H */ diff --git a/arch/mips/include/asm/mach-malta/mc146818rtc.h b/arch/mips/include/asm/mach-malta/mc146818rtc.h new file mode 100644 index 000000000000..ea612f37f614 --- /dev/null +++ b/arch/mips/include/asm/mach-malta/mc146818rtc.h @@ -0,0 +1,48 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2003 by Ralf Baechle + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * RTC routines for Malta style attached PIIX4 device, which contains a + * Motorola MC146818A-compatible Real Time Clock. + */ +#ifndef __ASM_MACH_MALTA_MC146818RTC_H +#define __ASM_MACH_MALTA_MC146818RTC_H + +#include +#include +#include + +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_IRQ 8 + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + outb(addr, MALTA_RTC_ADR_REG); + return inb(MALTA_RTC_DAT_REG); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + outb(addr, MALTA_RTC_ADR_REG); + outb(data, MALTA_RTC_DAT_REG); +} + +#define RTC_ALWAYS_BCD 0 + +#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) + +#endif /* __ASM_MACH_MALTA_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-malta/war.h b/arch/mips/include/asm/mach-malta/war.h new file mode 100644 index 000000000000..7c6931d5f45f --- /dev/null +++ b/arch/mips/include/asm/mach-malta/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_MIPS_WAR_H +#define __ASM_MIPS_MACH_MIPS_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 1 +#define MIPS_CACHE_SYNC_WAR 1 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ diff --git a/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h b/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h new file mode 100644 index 000000000000..779b02205737 --- /dev/null +++ b/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h @@ -0,0 +1,65 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Chris Dearman + */ +#ifndef __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H + + +/* + * CPU feature overrides for MIPS boards + */ +#ifdef CONFIG_CPU_MIPS32 +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +#define cpu_has_fpu 0 +/* #define cpu_has_32fpr ? */ +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +#define cpu_has_divec 1 +#define cpu_has_vce 0 +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +#define cpu_has_mcheck 1 +/* #define cpu_has_ejtag ? */ +#define cpu_has_llsc 1 +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +#define cpu_has_nofpuex 0 +/* #define cpu_has_64bits ? */ +/* #define cpu_has_64bit_zero_reg ? */ +/* #define cpu_has_inclusive_pcaches ? */ +#endif + +#ifdef CONFIG_CPU_MIPS64 +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +/* #define cpu_has_fpu ? */ +/* #define cpu_has_32fpr ? */ +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +#define cpu_has_divec 1 +#define cpu_has_vce 0 +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +#define cpu_has_mcheck 1 +/* #define cpu_has_ejtag ? */ +#define cpu_has_llsc 1 +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +#define cpu_has_nofpuex 0 +/* #define cpu_has_64bits ? */ +/* #define cpu_has_64bit_zero_reg ? */ +/* #define cpu_has_inclusive_pcaches ? */ +#endif + +#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-mipssim/war.h b/arch/mips/include/asm/mach-mipssim/war.h new file mode 100644 index 000000000000..c8a74a3515e0 --- /dev/null +++ b/arch/mips/include/asm/mach-mipssim/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_MIPSSIM_WAR_H +#define __ASM_MIPS_MACH_MIPSSIM_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_MIPSSIM_WAR_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h new file mode 100644 index 000000000000..622c58710e5b --- /dev/null +++ b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h @@ -0,0 +1,34 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03 by Ralf Baechle + * + * RTC routines for PC style attached Dallas chip. + */ +#ifndef __ASM_MACH_AU1XX_MC146818RTC_H +#define __ASM_MACH_AU1XX_MC146818RTC_H + +#include +#include + +#define RTC_PORT(x) (0x0c000000 + (x)) +#define RTC_IRQ 8 +#define PB1500_RTC_ADDR 0x0c000000 + +static inline unsigned char CMOS_READ(unsigned long offset) +{ + offset <<= 2; + return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long offset) +{ + offset <<= 2; + au_writel(data, offset + PB1500_RTC_ADDR); +} + +#define RTC_ALWAYS_BCD 1 + +#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1000.h b/arch/mips/include/asm/mach-pb1x00/pb1000.h new file mode 100644 index 000000000000..6d1ff9060e44 --- /dev/null +++ b/arch/mips/include/asm/mach-pb1x00/pb1000.h @@ -0,0 +1,87 @@ +/* + * Alchemy Semi Pb1000 Referrence Board + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1000_H +#define __ASM_PB1000_H + +/* PCMCIA PB1000 specific defines */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +#define PB1000_PCR 0xBE000000 +# define PCR_SLOT_0_VPP0 (1 << 0) +# define PCR_SLOT_0_VPP1 (1 << 1) +# define PCR_SLOT_0_VCC0 (1 << 2) +# define PCR_SLOT_0_VCC1 (1 << 3) +# define PCR_SLOT_0_RST (1 << 4) +# define PCR_SLOT_1_VPP0 (1 << 8) +# define PCR_SLOT_1_VPP1 (1 << 9) +# define PCR_SLOT_1_VCC0 (1 << 10) +# define PCR_SLOT_1_VCC1 (1 << 11) +# define PCR_SLOT_1_RST (1 << 12) + +#define PB1000_MDR 0xBE000004 +# define MDR_PI (1 << 5) /* PCMCIA int latch */ +# define MDR_EPI (1 << 14) /* enable PCMCIA int */ +# define MDR_CPI (1 << 15) /* clear PCMCIA int */ + +#define PB1000_ACR1 0xBE000008 +# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */ +# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */ +# define ACR1_SLOT_0_READY (1 << 2) /* ready */ +# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */ +# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */ +# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */ +# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */ +# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */ +# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */ +# define ACR1_SLOT_1_READY (1 << 10) /* ready */ +# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */ +# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */ +# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */ +# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */ + +#define CPLD_AUX0 0xBE00000C +#define CPLD_AUX1 0xBE000010 +#define CPLD_AUX2 0xBE000014 + +/* Voltage levels */ + +/* VPPEN1 - VPPEN0 */ +#define VPP_GND ((0 << 1) | (0 << 0)) +#define VPP_5V ((1 << 1) | (0 << 0)) +#define VPP_3V ((0 << 1) | (1 << 0)) +#define VPP_12V ((0 << 1) | (1 << 0)) +#define VPP_HIZ ((1 << 1) | (1 << 0)) + +/* VCCEN1 - VCCEN0 */ +#define VCC_3V ((0 << 1) | (1 << 0)) +#define VCC_5V ((1 << 1) | (0 << 0)) +#define VCC_HIZ ((0 << 1) | (0 << 0)) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) +#endif /* __ASM_PB1000_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1100.h b/arch/mips/include/asm/mach-pb1x00/pb1100.h new file mode 100644 index 000000000000..b1a60f1cbd02 --- /dev/null +++ b/arch/mips/include/asm/mach-pb1x00/pb1100.h @@ -0,0 +1,85 @@ +/* + * Alchemy Semi Pb1100 Referrence Board + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1100_H +#define __ASM_PB1100_H + +#define PB1100_IDENT 0xAE000000 +#define BOARD_STATUS_REG 0xAE000004 +# define PB1100_ROM_SEL (1 << 15) +# define PB1100_ROM_SIZ (1 << 14) +# define PB1100_SWAP_BOOT (1 << 13) +# define PB1100_FLASH_WP (1 << 12) +# define PB1100_ROM_H_STS (1 << 11) +# define PB1100_ROM_L_STS (1 << 10) +# define PB1100_FLASH_H_STS (1 << 9) +# define PB1100_FLASH_L_STS (1 << 8) +# define PB1100_SRAM_SIZ (1 << 7) +# define PB1100_TSC_BUSY (1 << 6) +# define PB1100_PCMCIA_VS_MASK (3 << 4) +# define PB1100_RS232_CD (1 << 3) +# define PB1100_RS232_CTS (1 << 2) +# define PB1100_RS232_DSR (1 << 1) +# define PB1100_RS232_RI (1 << 0) + +#define PB1100_IRDA_RS232 0xAE00000C +# define PB1100_IRDA_FULL (0 << 14) /* full power */ +# define PB1100_IRDA_SHUTDOWN (1 << 14) +# define PB1100_IRDA_TT (2 << 14) /* 2/3 power */ +# define PB1100_IRDA_OT (3 << 14) /* 1/3 power */ +# define PB1100_IRDA_FIR (1 << 13) + +#define PCMCIA_BOARD_REG 0xAE000010 +# define PB1100_SD_WP1_RO (1 << 15) /* read only */ +# define PB1100_SD_WP0_RO (1 << 14) /* read only */ +# define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */ +# define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */ +# define PB1100_SEL_SD_CONN1 (1 << 9) +# define PB1100_SEL_SD_CONN0 (1 << 8) +# define PC_DEASSERT_RST (1 << 7) +# define PC_DRV_EN (1 << 4) + +#define PB1100_G_CONTROL 0xAE000014 /* graphics control */ + +#define PB1100_RST_VDDI 0xAE00001C +# define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */ +# define PB1100_VDDI_MASK 0x1F + +#define PB1100_LEDS 0xAE000018 + +/* + * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED. + * 7:0 is the LED Display's decimal points. + */ +#define PB1100_HEX_LED 0xAE000018 + +/* PCMCIA Pb1100 specific defines */ +#define PCMCIA_MAX_SOCK 0 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) + +#endif /* __ASM_PB1100_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h new file mode 100644 index 000000000000..c8618df88cb5 --- /dev/null +++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h @@ -0,0 +1,259 @@ +/* + * AMD Alchemy Pb1200 Referrence Board + * Board Registers defines. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1200_H +#define __ASM_PB1200_H + +#include +#include + +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX + +/* + * SPI and SMB are muxed on the Pb1200 board. + * Refer to board documentation. + */ +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* + * AC97 and I2S are muxed on the Pb1200 board. + * Refer to board documentation. + */ +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define I2S_PSC_BASE PSC1_BASE_ADDR + +#define BCSR_KSEG1_ADDR 0xAD800000 + +typedef volatile struct +{ + /*00*/ u16 whoami; + u16 reserved0; + /*04*/ u16 status; + u16 reserved1; + /*08*/ u16 switches; + u16 reserved2; + /*0C*/ u16 resets; + u16 reserved3; + + /*10*/ u16 pcmcia; + u16 reserved4; + /*14*/ u16 board; + u16 reserved5; + /*18*/ u16 disk_leds; + u16 reserved6; + /*1C*/ u16 system; + u16 reserved7; + + /*20*/ u16 intclr; + u16 reserved8; + /*24*/ u16 intset; + u16 reserved9; + /*28*/ u16 intclr_mask; + u16 reserved10; + /*2C*/ u16 intset_mask; + u16 reserved11; + + /*30*/ u16 sig_status; + u16 reserved12; + /*34*/ u16 int_status; + u16 reserved13; + /*38*/ u16 reserved14; + u16 reserved15; + /*3C*/ u16 reserved16; + u16 reserved17; + +} BCSR; + +static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + +/* + * Register bit definitions for the BCSRs + */ +#define BCSR_WHOAMI_DCID 0x000F +#define BCSR_WHOAMI_CPLD 0x00F0 +#define BCSR_WHOAMI_BOARD 0x0F00 + +#define BCSR_STATUS_PCMCIA0VS 0x0003 +#define BCSR_STATUS_PCMCIA1VS 0x000C +#define BCSR_STATUS_SWAPBOOT 0x0040 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_IDECBLID 0x0200 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_SD1WP 0x0800 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 + +#define BCSR_SWITCHES_OCTAL 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + +#define BCSR_RESETS_ETH 0x0001 +#define BCSR_RESETS_CAMERA 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_IDE 0x0008 +/* not resets but in the same register */ +#define BCSR_RESETS_WSCFSM 0x0800 +#define BCSR_RESETS_PCS0MUX 0x1000 +#define BCSR_RESETS_PCS1MUX 0x2000 +#define BCSR_RESETS_SPISEL 0x4000 +#define BCSR_RESETS_SD1MUX 0x8000 + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + +#define BCSR_BOARD_LCDVEE 0x0001 +#define BCSR_BOARD_LCDVDD 0x0002 +#define BCSR_BOARD_LCDBL 0x0004 +#define BCSR_BOARD_CAMSNAP 0x0010 +#define BCSR_BOARD_CAMPWR 0x0020 +#define BCSR_BOARD_SD0PWR 0x0040 +#define BCSR_BOARD_SD1PWR 0x0080 + +#define BCSR_LEDS_DECIMALS 0x00FF +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + +#define BCSR_SYSTEM_VDDI 0x001F +#define BCSR_SYSTEM_POWEROFF 0x4000 +#define BCSR_SYSTEM_RESET 0x8000 + +/* Bit positions for the different interrupt sources */ +#define BCSR_INT_IDE 0x0001 +#define BCSR_INT_ETH 0x0002 +#define BCSR_INT_PC0 0x0004 +#define BCSR_INT_PC0STSCHG 0x0008 +#define BCSR_INT_PC1 0x0010 +#define BCSR_INT_PC1STSCHG 0x0020 +#define BCSR_INT_DC 0x0040 +#define BCSR_INT_FLASHBUSY 0x0080 +#define BCSR_INT_PC0INSERT 0x0100 +#define BCSR_INT_PC0EJECT 0x0200 +#define BCSR_INT_PC1INSERT 0x0400 +#define BCSR_INT_PC1EJECT 0x0800 +#define BCSR_INT_SD0INSERT 0x1000 +#define BCSR_INT_SD0EJECT 0x2000 +#define BCSR_INT_SD1INSERT 0x4000 +#define BCSR_INT_SD1EJECT 0x8000 + +#define SMC91C111_PHYS_ADDR 0x0D000300 +#define SMC91C111_INT PB1200_ETH_INT + +#define IDE_PHYS_ADDR 0x0C800000 +#define IDE_REG_SHIFT 5 +#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) +#define IDE_INT PB1200_IDE_INT +#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 +#define IDE_RQSIZE 128 + +#define NAND_PHYS_ADDR 0x1C000000 + +/* + * Timing values as described in databook, * ns value stripped of + * lower 2 bits. + * These defines are here rather than an Au1200 generic file because + * the parts chosen on another board may be different and may require + * different timings. + */ +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) + +/* Bitfield shift amounts */ +#define NAND_T_H_SHIFT 0 +#define NAND_T_PUL_SHIFT 4 +#define NAND_T_SU_SHIFT 8 +#define NAND_T_WH_SHIFT 12 + +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) + +/* + * External Interrupts for Pb1200 as of 8/6/2004. + * Bit positions in the CPLD registers can be calculated by taking + * the interrupt define and subtracting the PB1200_INT_BEGIN value. + * + * Example: IDE bis pos is = 64 - 64 + * ETH bit pos is = 65 - 64 + */ +enum external_pb1200_ints { + PB1200_INT_BEGIN = AU1000_MAX_INTR + 1, + + PB1200_IDE_INT = PB1200_INT_BEGIN, + PB1200_ETH_INT, + PB1200_PC0_INT, + PB1200_PC0_STSCHG_INT, + PB1200_PC1_INT, + PB1200_PC1_STSCHG_INT, + PB1200_DC_INT, + PB1200_FLASHBUSY_INT, + PB1200_PC0_INSERT_INT, + PB1200_PC0_EJECT_INT, + PB1200_PC1_INSERT_INT, + PB1200_PC1_EJECT_INT, + PB1200_SD0_INSERT_INT, + PB1200_SD0_EJECT_INT, + PB1200_SD1_INSERT_INT, + PB1200_SD1_EJECT_INT, + + PB1200_INT_END = PB1200_INT_BEGIN + 15 +}; + +/* + * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c + */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) + +#define BOARD_PC0_INT PB1200_PC0_INT +#define BOARD_PC1_INT PB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) + +/* NAND chip select */ +#define NAND_CS 1 + +#endif /* __ASM_PB1200_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1500.h b/arch/mips/include/asm/mach-pb1x00/pb1500.h new file mode 100644 index 000000000000..da51a2eb7b82 --- /dev/null +++ b/arch/mips/include/asm/mach-pb1x00/pb1500.h @@ -0,0 +1,49 @@ +/* + * Alchemy Semi Pb1500 Referrence Board + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1500_H +#define __ASM_PB1500_H + +#define IDENT_BOARD_REG 0xAE000000 +#define BOARD_STATUS_REG 0xAE000004 +#define PCI_BOARD_REG 0xAE000010 +#define PCMCIA_BOARD_REG 0xAE000010 +# define PC_DEASSERT_RST 0x80 +# define PC_DRV_EN 0x10 +#define PB1500_G_CONTROL 0xAE000014 +#define PB1500_RST_VDDI 0xAE00001C +#define PB1500_LEDS 0xAE000018 + +#define PB1500_HEX_LED 0xAF000004 +#define PB1500_HEX_LED_BLANK 0xAF000008 + +/* PCMCIA Pb1500 specific defines */ +#define PCMCIA_MAX_SOCK 0 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) + +#endif /* __ASM_PB1500_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h new file mode 100644 index 000000000000..6704a11497db --- /dev/null +++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h @@ -0,0 +1,177 @@ +/* + * AMD Alchemy Semi PB1550 Referrence Board + * Board Registers defines. + * + * Copyright 2004 Embedded Edge LLC. + * Copyright 2005 Ralf Baechle (ralf@linux-mips.org) + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1550_H +#define __ASM_PB1550_H + +#include +#include + +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX + +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define SMBUS_PSC_BASE PSC2_BASE_ADDR +#define I2S_PSC_BASE PSC3_BASE_ADDR + +#define BCSR_PHYS_ADDR 0xAF000000 + +typedef volatile struct +{ + /*00*/ u16 whoami; + u16 reserved0; + /*04*/ u16 status; + u16 reserved1; + /*08*/ u16 switches; + u16 reserved2; + /*0C*/ u16 resets; + u16 reserved3; + /*10*/ u16 pcmcia; + u16 reserved4; + /*14*/ u16 pci; + u16 reserved5; + /*18*/ u16 leds; + u16 reserved6; + /*1C*/ u16 system; + u16 reserved7; + +} BCSR; + +static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; + +/* + * Register bit definitions for the BCSRs + */ +#define BCSR_WHOAMI_DCID 0x000F +#define BCSR_WHOAMI_CPLD 0x00F0 +#define BCSR_WHOAMI_BOARD 0x0F00 + +#define BCSR_STATUS_PCMCIA0VS 0x0003 +#define BCSR_STATUS_PCMCIA1VS 0x000C +#define BCSR_STATUS_PCMCIA0FI 0x0010 +#define BCSR_STATUS_PCMCIA1FI 0x0020 +#define BCSR_STATUS_SWAPBOOT 0x0040 +#define BCSR_STATUS_SRAMWIDTH 0x0080 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_ROMBUSY 0x0200 +#define BCSR_STATUS_USBOTGID 0x0800 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 +#define BCSR_STATUS_U3RXD 0x8000 + +#define BCSR_SWITCHES_OCTAL 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + +#define BCSR_RESETS_PHY0 0x0001 +#define BCSR_RESETS_PHY1 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_WSC 0x2000 +#define BCSR_RESETS_SPISEL 0x4000 +#define BCSR_RESETS_DMAREQ 0x8000 + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + +#define BCSR_PCI_M66EN 0x0001 +#define BCSR_PCI_M33 0x0100 +#define BCSR_PCI_EXTERNARB 0x0200 +#define BCSR_PCI_GPIO200RST 0x0400 +#define BCSR_PCI_CLKOUT 0x0800 +#define BCSR_PCI_CFGHOST 0x1000 + +#define BCSR_LEDS_DECIMALS 0x00FF +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + +#define BCSR_SYSTEM_VDDI 0x001F +#define BCSR_SYSTEM_POWEROFF 0x4000 +#define BCSR_SYSTEM_RESET 0x8000 + +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) + +#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) +#define PB1550_BOTH_BANKS +#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER) +#define PB1550_BOOT_ONLY +#elif !defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) +#define PB1550_USER_ONLY +#endif + +/* + * Timing values as described in databook, * ns value stripped of + * lower 2 bits. + * These defines are here rather than an SOC1550 generic file because + * the parts chosen on another board may be different and may require + * different timings. + */ +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) + +/* Bitfield shift amounts */ +#define NAND_T_H_SHIFT 0 +#define NAND_T_PUL_SHIFT 4 +#define NAND_T_SU_SHIFT 8 +#define NAND_T_WH_SHIFT 12 + +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) + +#define NAND_CS 1 + +/* Should be done by YAMON */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ + +#endif /* __ASM_PB1550_H */ diff --git a/arch/mips/include/asm/mach-pnx8550/cm.h b/arch/mips/include/asm/mach-pnx8550/cm.h new file mode 100644 index 000000000000..bb0a56c7d011 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/cm.h @@ -0,0 +1,43 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Clock module specific definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_CM_H +#define __PNX8550_CM_H + +#define PNX8550_CM_BASE 0xBBE47000 + +#define PNX8550_CM_PLL0_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x000) +#define PNX8550_CM_PLL1_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x004) +#define PNX8550_CM_PLL2_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x008) +#define PNX8550_CM_PLL3_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x00C) + +// Table not complete..... + +#define PNX8550_CM_PLL_BLOCKED_MASK 0x80000000 +#define PNX8550_CM_PLL_LOCK_MASK 0x40000000 +#define PNX8550_CM_PLL_CURRENT_ADJ_MASK 0x3c000000 +#define PNX8550_CM_PLL_N_MASK 0x01ff0000 +#define PNX8550_CM_PLL_M_MASK 0x00003f00 +#define PNX8550_CM_PLL_P_MASK 0x0000000c +#define PNX8550_CM_PLL_PD_MASK 0x00000002 + + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/glb.h b/arch/mips/include/asm/mach-pnx8550/glb.h new file mode 100644 index 000000000000..07aa85e609bc --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/glb.h @@ -0,0 +1,86 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PNX8550 global definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_GLB_H +#define __PNX8550_GLB_H + +#define PNX8550_GLB1_BASE 0xBBE63000 +#define PNX8550_GLB2_BASE 0xBBE4d000 +#define PNX8550_RESET_BASE 0xBBE60000 + +/* PCI Inta Output Enable Registers */ +#define PNX8550_GLB2_ENAB_INTA_O *(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050) + +/* Bit 1:Enable DAC Powerdown + 0:DACs are enabled and are working normally + 1:DACs are powerdown +*/ +#define PNX8550_GLB_DAC_PD 0x2 +/* Bit 0:Enable of PCI inta output + 0 = Disable PCI inta output + 1 = Enable PCI inta output +*/ +#define PNX8550_GLB_ENABLE_INTA_O 0x1 + +/* PCI Direct Mappings */ +#define PNX8550_PCIMEM 0x12000000 +#define PNX8550_PCIMEM_SIZE 0x08000000 +#define PNX8550_PCIIO 0x1c000000 +#define PNX8550_PCIIO_SIZE 0x02000000 /* 32M */ + +#define PNX8550_PORT_BASE KSEG1 + +// GPIO def +#define PNX8550_GPIO_BASE 0x1Be00000 + +#define PNX8550_GPIO_DIRQ0 (PNX8550_GPIO_BASE + 0x104500) +#define PNX8550_GPIO_MC1 (PNX8550_GPIO_BASE + 0x104004) +#define PNX8550_GPIO_MC_31_BIT 30 +#define PNX8550_GPIO_MC_30_BIT 28 +#define PNX8550_GPIO_MC_29_BIT 26 +#define PNX8550_GPIO_MC_28_BIT 24 +#define PNX8550_GPIO_MC_27_BIT 22 +#define PNX8550_GPIO_MC_26_BIT 20 +#define PNX8550_GPIO_MC_25_BIT 18 +#define PNX8550_GPIO_MC_24_BIT 16 +#define PNX8550_GPIO_MC_23_BIT 14 +#define PNX8550_GPIO_MC_22_BIT 12 +#define PNX8550_GPIO_MC_21_BIT 10 +#define PNX8550_GPIO_MC_20_BIT 8 +#define PNX8550_GPIO_MC_19_BIT 6 +#define PNX8550_GPIO_MC_18_BIT 4 +#define PNX8550_GPIO_MC_17_BIT 2 +#define PNX8550_GPIO_MC_16_BIT 0 + +#define PNX8550_GPIO_MODE_PRIMOP 0x1 +#define PNX8550_GPIO_MODE_NO_OPENDR 0x2 +#define PNX8550_GPIO_MODE_OPENDR 0x3 + +// RESET module +#define PNX8550_RST_CTL *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0) +#define PNX8550_RST_CAUSE *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4) +#define PNX8550_RST_EN_WATCHDOG *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8) + +#define PNX8550_RST_REL_MIPS_RST_N 0x8 +#define PNX8550_RST_DO_SW_RST 0x4 +#define PNX8550_RST_REL_SYS_RST_OUT 0x2 +#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1 +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/int.h b/arch/mips/include/asm/mach-pnx8550/int.h new file mode 100644 index 000000000000..0e0668b524f4 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/int.h @@ -0,0 +1,140 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Interrupt specific definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_INT_H +#define __PNX8550_INT_H + +#define PNX8550_GIC_BASE 0xBBE3E000 + +#define PNX8550_GIC_PRIMASK_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x000) +#define PNX8550_GIC_PRIMASK_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x004) +#define PNX8550_GIC_VECTOR_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x100) +#define PNX8550_GIC_VECTOR_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x104) +#define PNX8550_GIC_PEND_1_31 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x200) +#define PNX8550_GIC_PEND_32_63 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x204) +#define PNX8550_GIC_PEND_64_70 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x208) +#define PNX8550_GIC_FEATURES *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x300) +#define PNX8550_GIC_REQ(x) *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x400 + (x)*4) +#define PNX8550_GIC_MOD_ID *(volatile unsigned long *)(PNX8550_GIC_BASE + 0xFFC) + +// cp0 is two software + six hw exceptions +#define PNX8550_INT_CP0_TOTINT 8 +#define PNX8550_INT_CP0_MIN 0 +#define PNX8550_INT_CP0_MAX (PNX8550_INT_CP0_MIN + PNX8550_INT_CP0_TOTINT - 1) + +#define MIPS_CPU_GIC_IRQ 2 +#define MIPS_CPU_TIMER_IRQ 7 + +// GIC are 71 exceptions connected to cp0's first hardware exception +#define PNX8550_INT_GIC_TOTINT 71 +#define PNX8550_INT_GIC_MIN (PNX8550_INT_CP0_MAX+1) +#define PNX8550_INT_GIC_MAX (PNX8550_INT_GIC_MIN + PNX8550_INT_GIC_TOTINT - 1) + +#define PNX8550_INT_UNDEF (PNX8550_INT_GIC_MIN+0) +#define PNX8550_INT_IPC_TARGET0_MIPS (PNX8550_INT_GIC_MIN+1) +#define PNX8550_INT_IPC_TARGET1_TM32_1 (PNX8550_INT_GIC_MIN+2) +#define PNX8550_INT_IPC_TARGET1_TM32_2 (PNX8550_INT_GIC_MIN+3) +#define PNX8550_INT_RESERVED_4 (PNX8550_INT_GIC_MIN+4) +#define PNX8550_INT_USB (PNX8550_INT_GIC_MIN+5) +#define PNX8550_INT_GPIO_EQ1 (PNX8550_INT_GIC_MIN+6) +#define PNX8550_INT_GPIO_EQ2 (PNX8550_INT_GIC_MIN+7) +#define PNX8550_INT_GPIO_EQ3 (PNX8550_INT_GIC_MIN+8) +#define PNX8550_INT_GPIO_EQ4 (PNX8550_INT_GIC_MIN+9) + +#define PNX8550_INT_GPIO_EQ5 (PNX8550_INT_GIC_MIN+10) +#define PNX8550_INT_GPIO_EQ6 (PNX8550_INT_GIC_MIN+11) +#define PNX8550_INT_RESERVED_12 (PNX8550_INT_GIC_MIN+12) +#define PNX8550_INT_QVCP1 (PNX8550_INT_GIC_MIN+13) +#define PNX8550_INT_QVCP2 (PNX8550_INT_GIC_MIN+14) +#define PNX8550_INT_I2C1 (PNX8550_INT_GIC_MIN+15) +#define PNX8550_INT_I2C2 (PNX8550_INT_GIC_MIN+16) +#define PNX8550_INT_ISO_UART1 (PNX8550_INT_GIC_MIN+17) +#define PNX8550_INT_ISO_UART2 (PNX8550_INT_GIC_MIN+18) +#define PNX8550_INT_UART1 (PNX8550_INT_GIC_MIN+19) + +#define PNX8550_INT_UART2 (PNX8550_INT_GIC_MIN+20) +#define PNX8550_INT_QNTR (PNX8550_INT_GIC_MIN+21) +#define PNX8550_INT_RESERVED22 (PNX8550_INT_GIC_MIN+22) +#define PNX8550_INT_T_DSC (PNX8550_INT_GIC_MIN+23) +#define PNX8550_INT_M_DSC (PNX8550_INT_GIC_MIN+24) +#define PNX8550_INT_RESERVED25 (PNX8550_INT_GIC_MIN+25) +#define PNX8550_INT_2D_DRAW_ENG (PNX8550_INT_GIC_MIN+26) +#define PNX8550_INT_MEM_BASED_SCALAR1 (PNX8550_INT_GIC_MIN+27) +#define PNX8550_INT_VIDEO_MPEG (PNX8550_INT_GIC_MIN+28) +#define PNX8550_INT_VIDEO_INPUT_P1 (PNX8550_INT_GIC_MIN+29) + +#define PNX8550_INT_VIDEO_INPUT_P2 (PNX8550_INT_GIC_MIN+30) +#define PNX8550_INT_SPDI1 (PNX8550_INT_GIC_MIN+31) +#define PNX8550_INT_SPDO (PNX8550_INT_GIC_MIN+32) +#define PNX8550_INT_AUDIO_INPUT1 (PNX8550_INT_GIC_MIN+33) +#define PNX8550_INT_AUDIO_OUTPUT1 (PNX8550_INT_GIC_MIN+34) +#define PNX8550_INT_AUDIO_INPUT2 (PNX8550_INT_GIC_MIN+35) +#define PNX8550_INT_AUDIO_OUTPUT2 (PNX8550_INT_GIC_MIN+36) +#define PNX8550_INT_MEMBASED_SCALAR2 (PNX8550_INT_GIC_MIN+37) +#define PNX8550_INT_VPK (PNX8550_INT_GIC_MIN+38) +#define PNX8550_INT_MPEG1_MIPS (PNX8550_INT_GIC_MIN+39) + +#define PNX8550_INT_MPEG1_TM (PNX8550_INT_GIC_MIN+40) +#define PNX8550_INT_MPEG2_MIPS (PNX8550_INT_GIC_MIN+41) +#define PNX8550_INT_MPEG2_TM (PNX8550_INT_GIC_MIN+42) +#define PNX8550_INT_TS_DMA (PNX8550_INT_GIC_MIN+43) +#define PNX8550_INT_EDMA (PNX8550_INT_GIC_MIN+44) +#define PNX8550_INT_TM_DEBUG1 (PNX8550_INT_GIC_MIN+45) +#define PNX8550_INT_TM_DEBUG2 (PNX8550_INT_GIC_MIN+46) +#define PNX8550_INT_PCI_INTA (PNX8550_INT_GIC_MIN+47) +#define PNX8550_INT_CLOCK_MODULE (PNX8550_INT_GIC_MIN+48) +#define PNX8550_INT_PCI_XIO_INTA_PCI (PNX8550_INT_GIC_MIN+49) + +#define PNX8550_INT_PCI_XIO_INTB_DMA (PNX8550_INT_GIC_MIN+50) +#define PNX8550_INT_PCI_XIO_INTC_GPPM (PNX8550_INT_GIC_MIN+51) +#define PNX8550_INT_PCI_XIO_INTD_GPXIO (PNX8550_INT_GIC_MIN+52) +#define PNX8550_INT_DVD_CSS (PNX8550_INT_GIC_MIN+53) +#define PNX8550_INT_VLD (PNX8550_INT_GIC_MIN+54) +#define PNX8550_INT_GPIO_TSU_7_0 (PNX8550_INT_GIC_MIN+55) +#define PNX8550_INT_GPIO_TSU_15_8 (PNX8550_INT_GIC_MIN+56) +#define PNX8550_INT_GPIO_CTU_IR (PNX8550_INT_GIC_MIN+57) +#define PNX8550_INT_GPIO0 (PNX8550_INT_GIC_MIN+58) +#define PNX8550_INT_GPIO1 (PNX8550_INT_GIC_MIN+59) + +#define PNX8550_INT_GPIO2 (PNX8550_INT_GIC_MIN+60) +#define PNX8550_INT_GPIO3 (PNX8550_INT_GIC_MIN+61) +#define PNX8550_INT_GPIO4 (PNX8550_INT_GIC_MIN+62) +#define PNX8550_INT_GPIO5 (PNX8550_INT_GIC_MIN+63) +#define PNX8550_INT_GPIO6 (PNX8550_INT_GIC_MIN+64) +#define PNX8550_INT_GPIO7 (PNX8550_INT_GIC_MIN+65) +#define PNX8550_INT_PMAN_SECURITY (PNX8550_INT_GIC_MIN+66) +#define PNX8550_INT_I2C3 (PNX8550_INT_GIC_MIN+67) +#define PNX8550_INT_RESERVED_68 (PNX8550_INT_GIC_MIN+68) +#define PNX8550_INT_SPDI2 (PNX8550_INT_GIC_MIN+69) + +#define PNX8550_INT_I2C4 (PNX8550_INT_GIC_MIN+70) + +// Timer are 3 exceptions connected to cp0's 7th hardware exception +#define PNX8550_INT_TIMER_TOTINT 3 +#define PNX8550_INT_TIMER_MIN (PNX8550_INT_GIC_MAX+1) +#define PNX8550_INT_TIMER_MAX (PNX8550_INT_TIMER_MIN + PNX8550_INT_TIMER_TOTINT - 1) + +#define PNX8550_INT_TIMER1 (PNX8550_INT_TIMER_MIN+0) +#define PNX8550_INT_TIMER2 (PNX8550_INT_TIMER_MIN+1) +#define PNX8550_INT_TIMER3 (PNX8550_INT_TIMER_MIN+2) +#define PNX8550_INT_WATCHDOG PNX8550_INT_TIMER3 + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h b/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h new file mode 100644 index 000000000000..bdde00c9199b --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h @@ -0,0 +1,262 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Embedded Alley Solutions, Inc + */ +#ifndef __ASM_MACH_KERNEL_ENTRY_INIT_H +#define __ASM_MACH_KERNEL_ENTRY_INIT_H + +#include +#include + +#define CO_CONFIGPR_VALID 0x3F1F41FF /* valid bits to write to ConfigPR */ +#define HAZARD_CP0 nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; +#define CACHE_OPC 0xBC000000 /* MIPS cache instruction opcode */ +#define ICACHE_LINE_SIZE 32 /* Instruction cache line size bytes */ +#define DCACHE_LINE_SIZE 32 /* Data cache line size in bytes */ + +#define ICACHE_SET_COUNT 256 /* Instruction cache set count */ +#define DCACHE_SET_COUNT 128 /* Data cache set count */ + +#define ICACHE_SET_SIZE (ICACHE_SET_COUNT * ICACHE_LINE_SIZE) +#define DCACHE_SET_SIZE (DCACHE_SET_COUNT * DCACHE_LINE_SIZE) + + .macro kernel_entry_setup + .set push + .set noreorder + /* + * PNX8550 entry point, when running a non compressed + * kernel. When loading a zImage, the head.S code in + * arch/mips/zboot/pnx8550 will init the caches and, + * decompress the kernel, and branch to kernel_entry. + */ +cache_begin: li t0, (1<<28) + mtc0 t0, CP0_STATUS /* cp0 usable */ + HAZARD_CP0 + + mtc0 zero, CP0_CAUSE + HAZARD_CP0 + + + /* Set static virtual to phys address translation and TLB disabled */ + mfc0 t0, CP0_CONFIG, 7 + HAZARD_CP0 + + and t0, ~((1<<19) | (1<<20)) /* TLB/MAP cleared */ + mtc0 t0, CP0_CONFIG, 7 + HAZARD_CP0 + + /* CPU boots with kseg0 cache algo set to 0x2 -- uncached */ + + init_icache + nop + init_dcache + nop + + cachePr4450ICReset + nop + + cachePr4450DCReset + nop + + /* read ConfigPR into t0 */ + mfc0 t0, CP0_CONFIG, 7 + HAZARD_CP0 + + /* enable the TLB */ + or t0, (1<<19) + + /* disable the ICACHE: at least 10x slower */ + /* or t0, (1<<26) */ + + /* disable the DCACHE; CONFIG_CPU_HAS_LLSC should not be set */ + /* or t0, (1<<27) */ + + and t0, CO_CONFIGPR_VALID + + /* enable TLB. */ + mtc0 t0, CP0_CONFIG, 7 + HAZARD_CP0 +cache_end: + /* Setup CMEM_0 to MMIO address space, 2MB */ + lui t0, 0x1BE0 + addi t0, t0, 0x3 + mtc0 $8, $22, 4 + nop + + /* Setup CMEM_1, 128MB */ + lui t0, 0x1000 + addi t0, t0, 0xf + mtc0 $8, $22, 5 + nop + + + /* Setup CMEM_2, 32MB */ + lui t0, 0x1C00 + addi t0, t0, 0xb + mtc0 $8, $22, 6 + nop + + /* Setup CMEM_3, 0MB */ + lui t0, 0x0 + addi t0, t0, 0x0 + mtc0 $8, $22, 7 + nop + + /* Enable cache */ + mfc0 t0, CP0_CONFIG + HAZARD_CP0 + and t0, t0, 0xFFFFFFF8 + or t0, t0, 3 + mtc0 t0, CP0_CONFIG + HAZARD_CP0 + .set pop + .endm + + .macro init_icache + .set push + .set noreorder + + /* Get Cache Configuration */ + mfc0 t3, CP0_CONFIG, 1 + HAZARD_CP0 + + /* get cache Line size */ + + srl t1, t3, 19 /* C0_CONFIGPR_IL_SHIFT */ + andi t1, t1, 0x7 /* C0_CONFIGPR_IL_MASK */ + beq t1, zero, pr4450_instr_cache_invalidated /* if zero instruction cache is absent */ + nop + addiu t0, t1, 1 + ori t1, zero, 1 + sllv t1, t1, t0 + + /* get max cache Index */ + srl t2, t3, 22 /* C0_CONFIGPR_IS_SHIFT */ + andi t2, t2, 0x7 /* C0_CONFIGPR_IS_MASK */ + addiu t0, t2, 6 + ori t2, zero, 1 + sllv t2, t2, t0 + + /* get max cache way */ + srl t3, t3, 16 /* C0_CONFIGPR_IA_SHIFT */ + andi t3, t3, 0x7 /* C0_CONFIGPR_IA_MASK */ + addiu t3, t3, 1 + + /* total no of cache lines */ + multu t2, t3 /* max index * max way */ + mflo t2 + addiu t2, t2, -1 + + move t0, zero +pr4450_next_instruction_cache_set: + cache Index_Invalidate_I, 0(t0) + addu t0, t0, t1 /* add bytes in a line */ + bne t2, zero, pr4450_next_instruction_cache_set + addiu t2, t2, -1 /* reduce no of lines to invalidate by one */ +pr4450_instr_cache_invalidated: + .set pop + .endm + + .macro init_dcache + .set push + .set noreorder + move t1, zero + + /* Store Tag Information */ + mtc0 zero, CP0_TAGLO, 0 + HAZARD_CP0 + + mtc0 zero, CP0_TAGHI, 0 + HAZARD_CP0 + + /* Cache size is 16384 = 512 lines x 32 bytes per line */ + or t2, zero, (128*4)-1 /* 512 lines */ + /* Invalidate all lines */ +2: + cache Index_Store_Tag_D, 0(t1) + addiu t2, t2, -1 + bne t2, zero, 2b + addiu t1, t1, 32 /* 32 bytes in a line */ + .set pop + .endm + + .macro cachePr4450ICReset + .set push + .set noreorder + + /* Save CP0 status reg on entry; */ + /* disable interrupts during cache reset */ + mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */ + HAZARD_CP0 + + mtc0 zero, CP0_STATUS /* disable CPU interrupts */ + HAZARD_CP0 + + or t1, zero, zero /* T1 = starting cache index (0) */ + ori t2, zero, (256 - 1) /* T2 = inst cache set cnt - 1 */ + + icache_invd_loop: + /* 9 == register t1 */ + .word CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \ + (0 * ICACHE_SET_SIZE) /* invalidate inst cache WAY0 */ + .word CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \ + (1 * ICACHE_SET_SIZE) /* invalidate inst cache WAY1 */ + + addiu t1, t1, ICACHE_LINE_SIZE /* T1 = next cache line index */ + bne t2, zero, icache_invd_loop /* T2 = 0 if all sets invalidated */ + addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */ + + /* Initialize the latches in the instruction cache tag */ + /* that drive the way selection tri-state bus drivers, by doing a */ + /* dummy load while the instruction cache is still disabled. */ + /* TODO: Is this needed ? */ + la t1, KSEG0 /* T1 = cached memory base address */ + lw zero, 0x0000(t1) /* (dummy read of first memory word) */ + + mtc0 t0, CP0_STATUS /* restore interrupt status on entry */ + HAZARD_CP0 + .set pop + .endm + + .macro cachePr4450DCReset + .set push + .set noreorder + mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */ + HAZARD_CP0 + mtc0 zero, CP0_STATUS /* disable CPU interrupts */ + HAZARD_CP0 + + /* Writeback/invalidate entire data cache sets/ways/lines */ + or t1, zero, zero /* T1 = starting cache index (0) */ + ori t2, zero, (DCACHE_SET_COUNT - 1) /* T2 = data cache set cnt - 1 */ + + dcache_wbinvd_loop: + /* 9 == register t1 */ + .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ + (0 * DCACHE_SET_SIZE) /* writeback/invalidate WAY0 */ + .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ + (1 * DCACHE_SET_SIZE) /* writeback/invalidate WAY1 */ + .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ + (2 * DCACHE_SET_SIZE) /* writeback/invalidate WAY2 */ + .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ + (3 * DCACHE_SET_SIZE) /* writeback/invalidate WAY3 */ + + addiu t1, t1, DCACHE_LINE_SIZE /* T1 = next data cache line index */ + bne t2, zero, dcache_wbinvd_loop /* T2 = 0 when wbinvd entire cache */ + addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */ + + /* Initialize the latches in the data cache tag that drive the way + selection tri-state bus drivers, by doing a dummy load while the + data cache is still in the disabled mode. TODO: Is this needed ? */ + la t1, KSEG0 /* T1 = cached memory base address */ + lw zero, 0x0000(t1) /* (dummy read of first memory word) */ + + mtc0 t0, CP0_STATUS /* restore interrupt status on entry */ + HAZARD_CP0 + .set pop + .endm + +#endif /* __ASM_MACH_KERNEL_ENTRY_INIT_H */ diff --git a/arch/mips/include/asm/mach-pnx8550/nand.h b/arch/mips/include/asm/mach-pnx8550/nand.h new file mode 100644 index 000000000000..aefbc514ab09 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/nand.h @@ -0,0 +1,121 @@ +#ifndef __PNX8550_NAND_H +#define __PNX8550_NAND_H + +#define PNX8550_NAND_BASE_ADDR 0x10000000 +#define PNX8550_PCIXIO_BASE 0xBBE40000 + +#define PNX8550_DMA_EXT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x800) +#define PNX8550_DMA_INT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x804) +#define PNX8550_DMA_TRANS_SIZE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x808) +#define PNX8550_DMA_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x80c) +#define PNX8550_XIO_SEL0 *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x814) +#define PNX8550_GPXIO_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x820) +#define PNX8550_GPXIO_WR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x824) +#define PNX8550_GPXIO_RD *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x828) +#define PNX8550_GPXIO_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x82C) +#define PNX8550_XIO_FLASH_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x830) +#define PNX8550_GPXIO_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb0) +#define PNX8550_GPXIO_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb4) +#define PNX8550_GPXIO_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb8) +#define PNX8550_DMA_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd0) +#define PNX8550_DMA_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd4) +#define PNX8550_DMA_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd8) + +#define PNX8550_XIO_SEL0_EN_16BIT 0x00800000 +#define PNX8550_XIO_SEL0_USE_ACK 0x00400000 +#define PNX8550_XIO_SEL0_REN_HIGH 0x00100000 +#define PNX8550_XIO_SEL0_REN_LOW 0x00040000 +#define PNX8550_XIO_SEL0_WEN_HIGH 0x00010000 +#define PNX8550_XIO_SEL0_WEN_LOW 0x00004000 +#define PNX8550_XIO_SEL0_WAIT 0x00000200 +#define PNX8550_XIO_SEL0_OFFSET 0x00000020 +#define PNX8550_XIO_SEL0_TYPE_68360 0x00000000 +#define PNX8550_XIO_SEL0_TYPE_NOR 0x00000008 +#define PNX8550_XIO_SEL0_TYPE_NAND 0x00000010 +#define PNX8550_XIO_SEL0_TYPE_IDE 0x00000018 +#define PNX8550_XIO_SEL0_SIZE_8MB 0x00000000 +#define PNX8550_XIO_SEL0_SIZE_16MB 0x00000002 +#define PNX8550_XIO_SEL0_SIZE_32MB 0x00000004 +#define PNX8550_XIO_SEL0_SIZE_64MB 0x00000006 +#define PNX8550_XIO_SEL0_ENAB 0x00000001 + +#define PNX8550_SEL0_DEFAULT ((PNX8550_XIO_SEL0_EN_16BIT) | \ + (PNX8550_XIO_SEL0_REN_HIGH*0)| \ + (PNX8550_XIO_SEL0_REN_LOW*2) | \ + (PNX8550_XIO_SEL0_WEN_HIGH*0)| \ + (PNX8550_XIO_SEL0_WEN_LOW*2) | \ + (PNX8550_XIO_SEL0_WAIT*4) | \ + (PNX8550_XIO_SEL0_OFFSET*0) | \ + (PNX8550_XIO_SEL0_TYPE_NAND) | \ + (PNX8550_XIO_SEL0_SIZE_32MB) | \ + (PNX8550_XIO_SEL0_ENAB)) + +#define PNX8550_GPXIO_PENDING 0x00000200 +#define PNX8550_GPXIO_DONE 0x00000100 +#define PNX8550_GPXIO_CLR_DONE 0x00000080 +#define PNX8550_GPXIO_INIT 0x00000040 +#define PNX8550_GPXIO_READ_CMD 0x00000010 +#define PNX8550_GPXIO_BEN 0x0000000F + +#define PNX8550_XIO_FLASH_64MB 0x00200000 +#define PNX8550_XIO_FLASH_INC_DATA 0x00100000 +#define PNX8550_XIO_FLASH_CMD_PH 0x000C0000 +#define PNX8550_XIO_FLASH_CMD_PH2 0x00080000 +#define PNX8550_XIO_FLASH_CMD_PH1 0x00040000 +#define PNX8550_XIO_FLASH_CMD_PH0 0x00000000 +#define PNX8550_XIO_FLASH_ADR_PH 0x00030000 +#define PNX8550_XIO_FLASH_ADR_PH3 0x00030000 +#define PNX8550_XIO_FLASH_ADR_PH2 0x00020000 +#define PNX8550_XIO_FLASH_ADR_PH1 0x00010000 +#define PNX8550_XIO_FLASH_ADR_PH0 0x00000000 +#define PNX8550_XIO_FLASH_CMD_B(x) ((x<<8) & 0x0000FF00) +#define PNX8550_XIO_FLASH_CMD_A(x) (x & 0x000000FF) + +#define PNX8550_XIO_INT_ACK 0x00004000 +#define PNX8550_XIO_INT_COMPL 0x00002000 +#define PNX8550_XIO_INT_NONSUP 0x00000200 +#define PNX8550_XIO_INT_ABORT 0x00000004 + +#define PNX8550_DMA_CTRL_SINGLE_DATA 0x00000400 +#define PNX8550_DMA_CTRL_SND2XIO 0x00000200 +#define PNX8550_DMA_CTRL_FIX_ADDR 0x00000100 +#define PNX8550_DMA_CTRL_BURST_8 0x00000000 +#define PNX8550_DMA_CTRL_BURST_16 0x00000020 +#define PNX8550_DMA_CTRL_BURST_32 0x00000040 +#define PNX8550_DMA_CTRL_BURST_64 0x00000060 +#define PNX8550_DMA_CTRL_BURST_128 0x00000080 +#define PNX8550_DMA_CTRL_BURST_256 0x000000A0 +#define PNX8550_DMA_CTRL_BURST_512 0x000000C0 +#define PNX8550_DMA_CTRL_BURST_NORES 0x000000E0 +#define PNX8550_DMA_CTRL_INIT_DMA 0x00000010 +#define PNX8550_DMA_CTRL_CMD_TYPE 0x0000000F + +/* see PCI system arch, page 100 for the full list: */ +#define PNX8550_DMA_CTRL_PCI_CMD_READ 0x00000006 +#define PNX8550_DMA_CTRL_PCI_CMD_WRITE 0x00000007 + +#define PNX8550_DMA_INT_STAT_ACK_DONE (1<<14) +#define PNX8550_DMA_INT_STAT_DMA_DONE (1<<12) +#define PNX8550_DMA_INT_STAT_DMA_ERR (1<<9) +#define PNX8550_DMA_INT_STAT_PERR5 (1<<5) +#define PNX8550_DMA_INT_STAT_PERR4 (1<<4) +#define PNX8550_DMA_INT_STAT_M_ABORT (1<<2) +#define PNX8550_DMA_INT_STAT_T_ABORT (1<<1) + +#define PNX8550_DMA_INT_EN_ACK_DONE (1<<14) +#define PNX8550_DMA_INT_EN_DMA_DONE (1<<12) +#define PNX8550_DMA_INT_EN_DMA_ERR (1<<9) +#define PNX8550_DMA_INT_EN_PERR5 (1<<5) +#define PNX8550_DMA_INT_EN_PERR4 (1<<4) +#define PNX8550_DMA_INT_EN_M_ABORT (1<<2) +#define PNX8550_DMA_INT_EN_T_ABORT (1<<1) + +#define PNX8550_DMA_INT_CLR_ACK_DONE (1<<14) +#define PNX8550_DMA_INT_CLR_DMA_DONE (1<<12) +#define PNX8550_DMA_INT_CLR_DMA_ERR (1<<9) +#define PNX8550_DMA_INT_CLR_PERR5 (1<<5) +#define PNX8550_DMA_INT_CLR_PERR4 (1<<4) +#define PNX8550_DMA_INT_CLR_M_ABORT (1<<2) +#define PNX8550_DMA_INT_CLR_T_ABORT (1<<1) + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/pci.h b/arch/mips/include/asm/mach-pnx8550/pci.h new file mode 100644 index 000000000000..b921508d701b --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/pci.h @@ -0,0 +1,185 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PCI specific definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_PCI_H +#define __PNX8550_PCI_H + +#include +#include +#include +#include + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +#define PCI_CMD_IOR 0x20 +#define PCI_CMD_IOW 0x30 +#define PCI_CMD_CONFIG_READ 0xa0 +#define PCI_CMD_CONFIG_WRITE 0xb0 + +#define PCI_IO_TIMEOUT 1000 +#define PCI_IO_RETRY 5 +/* Timeout for IO and CFG accesses. + This is in 1/1024 th of a jiffie(=10ms) + i.e. approx 10us */ +#define PCI_IO_JIFFIES_TIMEOUT 40 +#define PCI_IO_JIFFIES_SHIFT 10 + +#define PCI_BYTE_ENABLE_MASK 0x0000000f +#define PCI_CFG_BUS_SHIFT 16 +#define PCI_CFG_FUNC_SHIFT 8 +#define PCI_CFG_REG_SHIFT 2 + +#define PCI_BASE 0x1be00000 +#define PCI_SETUP 0x00040010 +#define PCI_DIS_REQGNT (1<<30) +#define PCI_DIS_REQGNTA (1<<29) +#define PCI_DIS_REQGNTB (1<<28) +#define PCI_D2_SUPPORT (1<<27) +#define PCI_D1_SUPPORT (1<<26) +#define PCI_EN_TA (1<<24) +#define PCI_EN_PCI2MMI (1<<23) +#define PCI_EN_XIO (1<<22) +#define PCI_BASE18_PREF (1<<21) +#define SIZE_16M 0x3 +#define SIZE_32M 0x4 +#define SIZE_64M 0x5 +#define SIZE_128M 0x6 +#define PCI_SETUP_BASE18_SIZE(X) (X<<18) +#define PCI_SETUP_BASE18_EN (1<<17) +#define PCI_SETUP_BASE14_PREF (1<<16) +#define PCI_SETUP_BASE14_SIZE(X) (X<<12) +#define PCI_SETUP_BASE14_EN (1<<11) +#define PCI_SETUP_BASE10_PREF (1<<10) +#define PCI_SETUP_BASE10_SIZE(X) (X<<7) +#define PCI_SETUP_CFGMANAGE_EN (1<<1) +#define PCI_SETUP_PCIARB_EN (1<<0) + +#define PCI_CTRL 0x040014 +#define PCI_SWPB_DCS_PCI (1<<16) +#define PCI_SWPB_PCI_PCI (1<<15) +#define PCI_SWPB_PCI_DCS (1<<14) +#define PCI_REG_WR_POST (1<<13) +#define PCI_XIO_WR_POST (1<<12) +#define PCI_PCI2_WR_POST (1<<13) +#define PCI_PCI1_WR_POST (1<<12) +#define PCI_SERR_SEEN (1<<11) +#define PCI_B10_SPEC_RD (1<<6) +#define PCI_B14_SPEC_RD (1<<5) +#define PCI_B18_SPEC_RD (1<<4) +#define PCI_B10_NOSUBWORD (1<<3) +#define PCI_B14_NOSUBWORD (1<<2) +#define PCI_B18_NOSUBWORD (1<<1) +#define PCI_RETRY_TMREN (1<<0) + +#define PCI_BASE1_LO 0x040018 +#define PCI_BASE1_HI 0x04001C +#define PCI_BASE2_LO 0x040020 +#define PCI_BASE2_HI 0x040024 +#define PCI_RDLIFETIM 0x040028 +#define PCI_GPPM_ADDR 0x04002C +#define PCI_GPPM_WDAT 0x040030 +#define PCI_GPPM_RDAT 0x040034 +#define PCI_GPPM_CTRL 0x040038 +#define GPPM_DONE (1<<10) +#define INIT_PCI_CYCLE (1<<9) +#define GPPM_CMD(X) (((X)&0xf)<<4) +#define GPPM_BYTEEN(X) ((X)&0xf) +#define PCI_UNLOCKREG 0x04003C +#define UNLOCK_SSID(X) (((X)&0xff)<<8) +#define UNLOCK_SETUP(X) (((X)&0xff)<<0) +#define UNLOCK_MAGIC 0xCA +#define PCI_DEV_VEND_ID 0x040040 +#define DEVICE_ID(X) (((X)>>16)&0xffff) +#define VENDOR_ID(X) (((X)&0xffff)) +#define PCI_CFG_CMDSTAT 0x040044 +#define PCI_CFG_STATUS(X) (((X)>>16)&0xffff) +#define PCI_CFG_COMMAND(X) ((X)&0xffff) +#define PCI_CLASS_REV 0x040048 +#define PCI_CLASSCODE(X) (((X)>>8)&0xffffff) +#define PCI_REVID(X) ((X)&0xff) +#define PCI_LAT_TMR 0x04004c +#define PCI_BASE10 0x040050 +#define PCI_BASE14 0x040054 +#define PCI_BASE18 0x040058 +#define PCI_SUBSYS_ID 0x04006c +#define PCI_CAP_PTR 0x040074 +#define PCI_CFG_MISC 0x04007c +#define PCI_PMC 0x040080 +#define PCI_PWR_STATE 0x040084 +#define PCI_IO 0x040088 +#define PCI_SLVTUNING 0x04008C +#define PCI_DMATUNING 0x040090 +#define PCI_DMAEADDR 0x040800 +#define PCI_DMAIADDR 0x040804 +#define PCI_DMALEN 0x040808 +#define PCI_DMACTRL 0x04080C +#define PCI_XIOCTRL 0x040810 +#define PCI_SEL0PROF 0x040814 +#define PCI_SEL1PROF 0x040818 +#define PCI_SEL2PROF 0x04081C +#define PCI_GPXIOADDR 0x040820 +#define PCI_NANDCTRLS 0x400830 +#define PCI_SEL3PROF 0x040834 +#define PCI_SEL4PROF 0x040838 +#define PCI_GPXIO_STAT 0x040FB0 +#define PCI_GPXIO_IMASK 0x040FB4 +#define PCI_GPXIO_ICLR 0x040FB8 +#define PCI_GPXIO_ISET 0x040FBC +#define PCI_GPPM_STATUS 0x040FC0 +#define GPPM_DONE (1<<10) +#define GPPM_ERR (1<<9) +#define GPPM_MPAR_ERR (1<<8) +#define GPPM_PAR_ERR (1<<7) +#define GPPM_R_MABORT (1<<2) +#define GPPM_R_TABORT (1<<1) +#define PCI_GPPM_IMASK 0x040FC4 +#define PCI_GPPM_ICLR 0x040FC8 +#define PCI_GPPM_ISET 0x040FCC +#define PCI_DMA_STATUS 0x040FD0 +#define PCI_DMA_IMASK 0x040FD4 +#define PCI_DMA_ICLR 0x040FD8 +#define PCI_DMA_ISET 0x040FDC +#define PCI_ISTATUS 0x040FE0 +#define PCI_IMASK 0x040FE4 +#define PCI_ICLR 0x040FE8 +#define PCI_ISET 0x040FEC +#define PCI_MOD_ID 0x040FFC + +/* + * PCI configuration cycle AD bus definition + */ +/* Type 0 */ +#define PCI_CFG_TYPE0_REG_SHF 0 +#define PCI_CFG_TYPE0_FUNC_SHF 8 + +/* Type 1 */ +#define PCI_CFG_TYPE1_REG_SHF 0 +#define PCI_CFG_TYPE1_FUNC_SHF 8 +#define PCI_CFG_TYPE1_DEV_SHF 11 +#define PCI_CFG_TYPE1_BUS_SHF 16 + +/* + * Ethernet device DP83816 definition + */ +#define DP83816_IRQ_ETHER 66 + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/uart.h b/arch/mips/include/asm/mach-pnx8550/uart.h new file mode 100644 index 000000000000..ad7608d44874 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/uart.h @@ -0,0 +1,30 @@ +#ifndef __IP3106_UART_H +#define __IP3106_UART_H + +#include + +/* early macros for kgdb use. fixme: clean this up */ + +#define UART_BASE 0xbbe4a000 /* PNX8550 */ + +#define PNX8550_UART_PORT0 (UART_BASE) +#define PNX8550_UART_PORT1 (UART_BASE + 0x1000) + +#define PNX8550_UART_INT(x) (PNX8550_INT_GIC_MIN+19+x) +#define IRQ_TO_UART(x) (x-PNX8550_INT_GIC_MIN-19) + +/* early macros needed for prom/kgdb */ + +#define ip3106_lcr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x000) +#define ip3106_mcr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x004) +#define ip3106_baud(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x008) +#define ip3106_cfg(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x00C) +#define ip3106_fifo(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x028) +#define ip3106_istat(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE0) +#define ip3106_ien(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE4) +#define ip3106_iclr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE8) +#define ip3106_iset(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFEC) +#define ip3106_pd(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFF4) +#define ip3106_mid(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFFC) + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/usb.h b/arch/mips/include/asm/mach-pnx8550/usb.h new file mode 100644 index 000000000000..483b7fc65d41 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/usb.h @@ -0,0 +1,32 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * USB specific definitions + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef __PNX8550_USB_H +#define __PNX8550_USB_H + +/* + * USB Host controller + */ + +#define PNX8550_USB_OHCI_OP_BASE 0x1be48000 +#define PNX8550_USB_OHCI_OP_LEN 0x1000 + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/war.h b/arch/mips/include/asm/mach-pnx8550/war.h new file mode 100644 index 000000000000..d0458dd082f9 --- /dev/null +++ b/arch/mips/include/asm/mach-pnx8550/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_PNX8550_WAR_H +#define __ASM_MIPS_MACH_PNX8550_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */ diff --git a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h new file mode 100644 index 000000000000..f3bc7efa2608 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h @@ -0,0 +1,81 @@ +/* + * IDT RC32434 specific CPU feature overrides + * + * Copyright (C) 2008 Florian Fainelli + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ +#ifndef __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H + +/* + * The IDT RC32434 SOC has a built-in MIPS 4Kc core. + */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_vtag_icache 0 +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +/* #define cpu_has_pindexed_dcache ? */ + +/* #define cpu_icache_snoops_remote_store ? */ + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +/* #define cpu_has_nofpuex ? */ +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_has_inclusive_pcaches 0 + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 + +#endif /* __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-rc32434/ddr.h b/arch/mips/include/asm/mach-rc32434/ddr.h new file mode 100644 index 000000000000..291e2cf9dde0 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/ddr.h @@ -0,0 +1,141 @@ +/* + * Definitions for the DDR registers + * + * Copyright 2002 Ryan Holm + * Copyright 2008 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _ASM_RC32434_DDR_H_ +#define _ASM_RC32434_DDR_H_ + +#include + +/* DDR register structure */ +struct ddr_ram { + u32 ddrbase; + u32 ddrmask; + u32 res1; + u32 res2; + u32 ddrc; + u32 ddrabase; + u32 ddramask; + u32 ddramap; + u32 ddrcust; + u32 ddrrdc; + u32 ddrspare; +}; + +#define DDR0_PHYS_ADDR 0x18018000 + +/* DDR banks masks */ +#define DDR_MASK 0xffff0000 +#define DDR0_BASE_MSK DDR_MASK +#define DDR1_BASE_MSK DDR_MASK + +/* DDR bank0 registers */ +#define RC32434_DDR0_ATA_BIT 5 +#define RC32434_DDR0_ATA_MSK 0x000000E0 +#define RC32434_DDR0_DBW_BIT 8 +#define RC32434_DDR0_DBW_MSK 0x00000100 +#define RC32434_DDR0_WR_BIT 9 +#define RC32434_DDR0_WR_MSK 0x00000600 +#define RC32434_DDR0_PS_BIT 11 +#define RC32434_DDR0_PS_MSK 0x00001800 +#define RC32434_DDR0_DTYPE_BIT 13 +#define RC32434_DDR0_DTYPE_MSK 0x0000e000 +#define RC32434_DDR0_RFC_BIT 16 +#define RC32434_DDR0_RFC_MSK 0x000f0000 +#define RC32434_DDR0_RP_BIT 20 +#define RC32434_DDR0_RP_MSK 0x00300000 +#define RC32434_DDR0_AP_BIT 22 +#define RC32434_DDR0_AP_MSK 0x00400000 +#define RC32434_DDR0_RCD_BIT 23 +#define RC32434_DDR0_RCD_MSK 0x01800000 +#define RC32434_DDR0_CL_BIT 25 +#define RC32434_DDR0_CL_MSK 0x06000000 +#define RC32434_DDR0_DBM_BIT 27 +#define RC32434_DDR0_DBM_MSK 0x08000000 +#define RC32434_DDR0_SDS_BIT 28 +#define RC32434_DDR0_SDS_MSK 0x10000000 +#define RC32434_DDR0_ATP_BIT 29 +#define RC32434_DDR0_ATP_MSK 0x60000000 +#define RC32434_DDR0_RE_BIT 31 +#define RC32434_DDR0_RE_MSK 0x80000000 + +/* DDR bank C registers */ +#define RC32434_DDRC_MSK(x) BIT_TO_MASK(x) +#define RC32434_DDRC_CES_BIT 0 +#define RC32434_DDRC_ACE_BIT 1 + +/* Custom DDR bank registers */ +#define RC32434_DCST_MSK(x) BIT_TO_MASK(x) +#define RC32434_DCST_CS_BIT 0 +#define RC32434_DCST_CS_MSK 0x00000003 +#define RC32434_DCST_WE_BIT 2 +#define RC32434_DCST_RAS_BIT 3 +#define RC32434_DCST_CAS_BIT 4 +#define RC32434_DSCT_CKE_BIT 5 +#define RC32434_DSCT_BA_BIT 6 +#define RC32434_DSCT_BA_MSK 0x000000c0 + +/* DDR QSC registers */ +#define RC32434_QSC_DM_BIT 0 +#define RC32434_QSC_DM_MSK 0x00000003 +#define RC32434_QSC_DQSBS_BIT 2 +#define RC32434_QSC_DQSBS_MSK 0x000000fc +#define RC32434_QSC_DB_BIT 8 +#define RC32434_QSC_DB_MSK 0x00000100 +#define RC32434_QSC_DBSP_BIT 9 +#define RC32434_QSC_DBSP_MSK 0x01fffe00 +#define RC32434_QSC_BDP_BIT 25 +#define RC32434_QSC_BDP_MSK 0x7e000000 + +/* DDR LLC registers */ +#define RC32434_LLC_EAO_BIT 0 +#define RC32434_LLC_EAO_MSK 0x00000001 +#define RC32434_LLC_EO_BIT 1 +#define RC32434_LLC_EO_MSK 0x0000003e +#define RC32434_LLC_FS_BIT 6 +#define RC32434_LLC_FS_MSK 0x000000c0 +#define RC32434_LLC_AS_BIT 8 +#define RC32434_LLC_AS_MSK 0x00000700 +#define RC32434_LLC_SP_BIT 11 +#define RC32434_LLC_SP_MSK 0x001ff800 + +/* DDR LLFC registers */ +#define RC32434_LLFC_MSK(x) BIT_TO_MASK(x) +#define RC32434_LLFC_MEN_BIT 0 +#define RC32434_LLFC_EAN_BIT 1 +#define RC32434_LLFC_FF_BIT 2 + +/* DDR DLLTA registers */ +#define RC32434_DLLTA_ADDR_BIT 2 +#define RC32434_DLLTA_ADDR_MSK 0xfffffffc + +/* DDR DLLED registers */ +#define RC32434_DLLED_MSK(x) BIT_TO_MASK(x) +#define RC32434_DLLED_DBE_BIT 0 +#define RC32434_DLLED_DTE_BIT 1 + +#endif /* _ASM_RC32434_DDR_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/dma.h b/arch/mips/include/asm/mach-rc32434/dma.h new file mode 100644 index 000000000000..5f898b5873f7 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/dma.h @@ -0,0 +1,103 @@ +/* + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * DMA register definition. + * + * Author : ryan.holmQVist@idt.com + * Date : 20011005 + */ + +#ifndef __ASM_RC32434_DMA_H +#define __ASM_RC32434_DMA_H + +#include + +#define DMA0_BASE_ADDR 0x18040000 + +/* + * DMA descriptor (in physical memory). + */ + +struct dma_desc { + u32 control; /* Control. use DMAD_* */ + u32 ca; /* Current Address. */ + u32 devcs; /* Device control and status. */ + u32 link; /* Next descriptor in chain. */ +}; + +#define DMA_DESC_SIZ sizeof(struct dma_desc) +#define DMA_DESC_COUNT_BIT 0 +#define DMA_DESC_COUNT_MSK 0x0003ffff +#define DMA_DESC_DS_BIT 20 +#define DMA_DESC_DS_MSK 0x00300000 + +#define DMA_DESC_DEV_CMD_BIT 22 +#define DMA_DESC_DEV_CMD_MSK 0x01c00000 + +/* DMA command sizes */ +#define DMA_DESC_DEV_CMD_BYTE 0 +#define DMA_DESC_DEV_CMD_HLF_WD 1 +#define DMA_DESC_DEV_CMD_WORD 2 +#define DMA_DESC_DEV_CMD_2WORDS 3 +#define DMA_DESC_DEV_CMD_4WORDS 4 +#define DMA_DESC_DEV_CMD_6WORDS 5 +#define DMA_DESC_DEV_CMD_8WORDS 6 +#define DMA_DESC_DEV_CMD_16WORDS 7 + +/* DMA descriptors interrupts */ +#define DMA_DESC_COF (1 << 25) /* Chain on finished */ +#define DMA_DESC_COD (1 << 26) /* Chain on done */ +#define DMA_DESC_IOF (1 << 27) /* Interrupt on finished */ +#define DMA_DESC_IOD (1 << 28) /* Interrupt on done */ +#define DMA_DESC_TERM (1 << 29) /* Terminated */ +#define DMA_DESC_DONE (1 << 30) /* Done */ +#define DMA_DESC_FINI (1 << 31) /* Finished */ + +/* + * DMA register (within Internal Register Map). + */ + +struct dma_reg { + u32 dmac; /* Control. */ + u32 dmas; /* Status. */ + u32 dmasm; /* Mask. */ + u32 dmadptr; /* Descriptor pointer. */ + u32 dmandptr; /* Next descriptor pointer. */ +}; + +/* DMA channels specific registers */ +#define DMA_CHAN_RUN_BIT (1 << 0) +#define DMA_CHAN_DONE_BIT (1 << 1) +#define DMA_CHAN_MODE_BIT (1 << 2) +#define DMA_CHAN_MODE_MSK 0x0000000c +#define DMA_CHAN_MODE_AUTO 0 +#define DMA_CHAN_MODE_BURST 1 +#define DMA_CHAN_MODE_XFRT 2 +#define DMA_CHAN_MODE_RSVD 3 +#define DMA_CHAN_ACT_BIT (1 << 4) + +/* DMA status registers */ +#define DMA_STAT_FINI (1 << 0) +#define DMA_STAT_DONE (1 << 1) +#define DMA_STAT_CHAIN (1 << 2) +#define DMA_STAT_ERR (1 << 3) +#define DMA_STAT_HALT (1 << 4) + +/* + * DMA channel definitions + */ + +#define DMA_CHAN_ETH_RCV 0 +#define DMA_CHAN_ETH_XMT 1 +#define DMA_CHAN_MEM_TO_FIFO 2 +#define DMA_CHAN_FIFO_TO_MEM 3 +#define DMA_CHAN_PCI_TO_MEM 4 +#define DMA_CHAN_MEM_TO_PCI 5 +#define DMA_CHAN_COUNT 6 + +struct dma_channel { + struct dma_reg ch[DMA_CHAN_COUNT]; +}; + +#endif /* __ASM_RC32434_DMA_H */ diff --git a/arch/mips/include/asm/mach-rc32434/dma_v.h b/arch/mips/include/asm/mach-rc32434/dma_v.h new file mode 100644 index 000000000000..173a9f9146cd --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/dma_v.h @@ -0,0 +1,52 @@ +/* + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * DMA register definition. + * + * Author : ryan.holmQVist@idt.com + * Date : 20011005 + */ + +#ifndef _ASM_RC32434_DMA_V_H_ +#define _ASM_RC32434_DMA_V_H_ + +#include +#include + +#define DMA_CHAN_OFFSET 0x14 +#define IS_DMA_USED(X) (((X) & \ + (DMA_DESC_FINI | DMA_DESC_DONE | DMA_DESC_TERM)) \ + != 0) +#define DMA_COUNT(count) ((count) & DMA_DESC_COUNT_MSK) + +#define DMA_HALT_TIMEOUT 500 + +static inline int rc32434_halt_dma(struct dma_reg *ch) +{ + int timeout = 1; + if (__raw_readl(&ch->dmac) & DMA_CHAN_RUN_BIT) { + __raw_writel(0, &ch->dmac); + for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) { + if (__raw_readl(&ch->dmas) & DMA_STAT_HALT) { + __raw_writel(0, &ch->dmas); + break; + } + } + } + + return timeout ? 0 : 1; +} + +static inline void rc32434_start_dma(struct dma_reg *ch, u32 dma_addr) +{ + __raw_writel(0, &ch->dmandptr); + __raw_writel(dma_addr, &ch->dmadptr); +} + +static inline void rc32434_chain_dma(struct dma_reg *ch, u32 dma_addr) +{ + __raw_writel(dma_addr, &ch->dmandptr); +} + +#endif /* _ASM_RC32434_DMA_V_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/eth.h b/arch/mips/include/asm/mach-rc32434/eth.h new file mode 100644 index 000000000000..a25cbc56173d --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/eth.h @@ -0,0 +1,220 @@ +/* + * Definitions for the Ethernet registers + * + * Copyright 2002 Allend Stichter + * Copyright 2008 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __ASM_RC32434_ETH_H +#define __ASM_RC32434_ETH_H + + +#define ETH0_BASE_ADDR 0x18060000 + +struct eth_regs { + u32 ethintfc; + u32 ethfifott; + u32 etharc; + u32 ethhash0; + u32 ethhash1; + u32 ethu0[4]; /* Reserved. */ + u32 ethpfs; + u32 ethmcp; + u32 eth_u1[10]; /* Reserved. */ + u32 ethspare; + u32 eth_u2[42]; /* Reserved. */ + u32 ethsal0; + u32 ethsah0; + u32 ethsal1; + u32 ethsah1; + u32 ethsal2; + u32 ethsah2; + u32 ethsal3; + u32 ethsah3; + u32 ethrbc; + u32 ethrpc; + u32 ethrupc; + u32 ethrfc; + u32 ethtbc; + u32 ethgpf; + u32 eth_u9[50]; /* Reserved. */ + u32 ethmac1; + u32 ethmac2; + u32 ethipgt; + u32 ethipgr; + u32 ethclrt; + u32 ethmaxf; + u32 eth_u10; /* Reserved. */ + u32 ethmtest; + u32 miimcfg; + u32 miimcmd; + u32 miimaddr; + u32 miimwtd; + u32 miimrdd; + u32 miimind; + u32 eth_u11; /* Reserved. */ + u32 eth_u12; /* Reserved. */ + u32 ethcfsa0; + u32 ethcfsa1; + u32 ethcfsa2; +}; + +/* Ethernet interrupt registers */ +#define ETH_INT_FC_EN (1 << 0) +#define ETH_INT_FC_ITS (1 << 1) +#define ETH_INT_FC_RIP (1 << 2) +#define ETH_INT_FC_JAM (1 << 3) +#define ETH_INT_FC_OVR (1 << 4) +#define ETH_INT_FC_UND (1 << 5) +#define ETH_INT_FC_IOC 0x000000c0 + +/* Ethernet FIFO registers */ +#define ETH_FIFI_TT_TTH_BIT 0 +#define ETH_FIFO_TT_TTH 0x0000007f + +/* Ethernet ARC/multicast registers */ +#define ETH_ARC_PRO (1 << 0) +#define ETH_ARC_AM (1 << 1) +#define ETH_ARC_AFM (1 << 2) +#define ETH_ARC_AB (1 << 3) + +/* Ethernet SAL registers */ +#define ETH_SAL_BYTE_5 0x000000ff +#define ETH_SAL_BYTE_4 0x0000ff00 +#define ETH_SAL_BYTE_3 0x00ff0000 +#define ETH_SAL_BYTE_2 0xff000000 + +/* Ethernet SAH registers */ +#define ETH_SAH_BYTE1 0x000000ff +#define ETH_SAH_BYTE0 0x0000ff00 + +/* Ethernet GPF register */ +#define ETH_GPF_PTV 0x0000ffff + +/* Ethernet PFG register */ +#define ETH_PFS_PFD (1 << 0) + +/* Ethernet CFSA[0-3] registers */ +#define ETH_CFSA0_CFSA4 0x000000ff +#define ETH_CFSA0_CFSA5 0x0000ff00 +#define ETH_CFSA1_CFSA2 0x000000ff +#define ETH_CFSA1_CFSA3 0x0000ff00 +#define ETH_CFSA1_CFSA0 0x000000ff +#define ETH_CFSA1_CFSA1 0x0000ff00 + +/* Ethernet MAC1 registers */ +#define ETH_MAC1_RE (1 << 0) +#define ETH_MAC1_PAF (1 << 1) +#define ETH_MAC1_RFC (1 << 2) +#define ETH_MAC1_TFC (1 << 3) +#define ETH_MAC1_LB (1 << 4) +#define ETH_MAC1_MR (1 << 31) + +/* Ethernet MAC2 registers */ +#define ETH_MAC2_FD (1 << 0) +#define ETH_MAC2_FLC (1 << 1) +#define ETH_MAC2_HFE (1 << 2) +#define ETH_MAC2_DC (1 << 3) +#define ETH_MAC2_CEN (1 << 4) +#define ETH_MAC2_PE (1 << 5) +#define ETH_MAC2_VPE (1 << 6) +#define ETH_MAC2_APE (1 << 7) +#define ETH_MAC2_PPE (1 << 8) +#define ETH_MAC2_LPE (1 << 9) +#define ETH_MAC2_NB (1 << 12) +#define ETH_MAC2_BP (1 << 13) +#define ETH_MAC2_ED (1 << 14) + +/* Ethernet IPGT register */ +#define ETH_IPGT 0x0000007f + +/* Ethernet IPGR registers */ +#define ETH_IPGR_IPGR2 0x0000007f +#define ETH_IPGR_IPGR1 0x00007f00 + +/* Ethernet CLRT registers */ +#define ETH_CLRT_MAX_RET 0x0000000f +#define ETH_CLRT_COL_WIN 0x00003f00 + +/* Ethernet MAXF register */ +#define ETH_MAXF 0x0000ffff + +/* Ethernet test registers */ +#define ETH_TEST_REG (1 << 2) +#define ETH_MCP_DIV 0x000000ff + +/* MII registers */ +#define ETH_MII_CFG_RSVD 0x0000000c +#define ETH_MII_CMD_RD (1 << 0) +#define ETH_MII_CMD_SCN (1 << 1) +#define ETH_MII_REG_ADDR 0x0000001f +#define ETH_MII_PHY_ADDR 0x00001f00 +#define ETH_MII_WTD_DATA 0x0000ffff +#define ETH_MII_RDD_DATA 0x0000ffff +#define ETH_MII_IND_BSY (1 << 0) +#define ETH_MII_IND_SCN (1 << 1) +#define ETH_MII_IND_NV (1 << 2) + +/* + * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors. + */ + +#define ETH_RX_FD (1 << 0) +#define ETH_RX_LD (1 << 1) +#define ETH_RX_ROK (1 << 2) +#define ETH_RX_FM (1 << 3) +#define ETH_RX_MP (1 << 4) +#define ETH_RX_BP (1 << 5) +#define ETH_RX_VLT (1 << 6) +#define ETH_RX_CF (1 << 7) +#define ETH_RX_OVR (1 << 8) +#define ETH_RX_CRC (1 << 9) +#define ETH_RX_CV (1 << 10) +#define ETH_RX_DB (1 << 11) +#define ETH_RX_LE (1 << 12) +#define ETH_RX_LOR (1 << 13) +#define ETH_RX_CES (1 << 14) +#define ETH_RX_LEN_BIT 16 +#define ETH_RX_LEN 0xffff0000 + +#define ETH_TX_FD (1 << 0) +#define ETH_TX_LD (1 << 1) +#define ETH_TX_OEN (1 << 2) +#define ETH_TX_PEN (1 << 3) +#define ETH_TX_CEN (1 << 4) +#define ETH_TX_HEN (1 << 5) +#define ETH_TX_TOK (1 << 6) +#define ETH_TX_MP (1 << 7) +#define ETH_TX_BP (1 << 8) +#define ETH_TX_UND (1 << 9) +#define ETH_TX_OF (1 << 10) +#define ETH_TX_ED (1 << 11) +#define ETH_TX_EC (1 << 12) +#define ETH_TX_LC (1 << 13) +#define ETH_TX_TD (1 << 14) +#define ETH_TX_CRC (1 << 15) +#define ETH_TX_LE (1 << 16) +#define ETH_TX_CC 0x001E0000 + +#endif /* __ASM_RC32434_ETH_H */ diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h new file mode 100644 index 000000000000..3a70b41cd7a5 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/gpio.h @@ -0,0 +1,88 @@ +/* + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * GPIO register definition. + * + * Author : ryan.holmQVist@idt.com + * Date : 20011005 + * Copyright (C) 2001, 2002 Ryan Holm + * Copyright (C) 2008 Florian Fainelli + */ + +#ifndef _RC32434_GPIO_H_ +#define _RC32434_GPIO_H_ + +#include + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value + +#define gpio_cansleep __gpio_cansleep + +#define gpio_to_irq(gpio) IRQ_GPIO(gpio) +#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) + +#include + +struct rb532_gpio_reg { + u32 gpiofunc; /* GPIO Function Register + * gpiofunc[x]==0 bit = gpio + * func[x]==1 bit = altfunc + */ + u32 gpiocfg; /* GPIO Configuration Register + * gpiocfg[x]==0 bit = input + * gpiocfg[x]==1 bit = output + */ + u32 gpiod; /* GPIO Data Register + * gpiod[x] read/write gpio pinX status + */ + u32 gpioilevel; /* GPIO Interrupt Status Register + * interrupt level (see gpioistat) + */ + u32 gpioistat; /* Gpio Interrupt Status Register + * istat[x] = (gpiod[x] == level[x]) + * cleared in ISR (STICKY bits) + */ + u32 gpionmien; /* GPIO Non-maskable Interrupt Enable Register */ +}; + +/* UART GPIO signals */ +#define RC32434_UART0_SOUT (1 << 0) +#define RC32434_UART0_SIN (1 << 1) +#define RC32434_UART0_RTS (1 << 2) +#define RC32434_UART0_CTS (1 << 3) + +/* M & P bus GPIO signals */ +#define RC32434_MP_BIT_22 (1 << 4) +#define RC32434_MP_BIT_23 (1 << 5) +#define RC32434_MP_BIT_24 (1 << 6) +#define RC32434_MP_BIT_25 (1 << 7) + +/* CPU GPIO signals */ +#define RC32434_CPU_GPIO (1 << 8) + +/* Reserved GPIO signals */ +#define RC32434_AF_SPARE_6 (1 << 9) +#define RC32434_AF_SPARE_4 (1 << 10) +#define RC32434_AF_SPARE_3 (1 << 11) +#define RC32434_AF_SPARE_2 (1 << 12) + +/* PCI messaging unit */ +#define RC32434_PCI_MSU_GPIO (1 << 13) + +/* NAND GPIO signals */ +#define GPIO_RDY 8 +#define GPIO_WPX 9 +#define GPIO_ALE 10 +#define GPIO_CLE 11 + +/* Compact Flash GPIO pin */ +#define CF_GPIO_NUM 13 + +extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val); +extern unsigned get_434_reg(unsigned reg_offs); +extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask); +extern unsigned char get_latch_u5(void); + +#endif /* _RC32434_GPIO_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/integ.h b/arch/mips/include/asm/mach-rc32434/integ.h new file mode 100644 index 000000000000..fa65bc3d8807 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/integ.h @@ -0,0 +1,59 @@ +/* + * Definitions for the Watchdog registers + * + * Copyright 2002 Ryan Holm + * Copyright 2008 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __RC32434_INTEG_H__ +#define __RC32434_INTEG_H__ + +#include + +#define INTEG0_BASE_ADDR 0x18030030 + +struct integ { + u32 errcs; /* sticky use ERRCS_ */ + u32 wtcount; /* Watchdog timer count reg. */ + u32 wtcompare; /* Watchdog timer timeout value. */ + u32 wtc; /* Watchdog timer control. use WTC_ */ +}; + +/* Error counters */ +#define RC32434_ERR_WTO 0 +#define RC32434_ERR_WNE 1 +#define RC32434_ERR_UCW 2 +#define RC32434_ERR_UCR 3 +#define RC32434_ERR_UPW 4 +#define RC32434_ERR_UPR 5 +#define RC32434_ERR_UDW 6 +#define RC32434_ERR_UDR 7 +#define RC32434_ERR_SAE 8 +#define RC32434_ERR_WRE 9 + +/* Watchdog control bits */ +#define RC32434_WTC_EN 0 +#define RC32434_WTC_TO 1 + +#endif /* __RC32434_INTEG_H__ */ diff --git a/arch/mips/include/asm/mach-rc32434/irq.h b/arch/mips/include/asm/mach-rc32434/irq.h new file mode 100644 index 000000000000..56738d8ec4e2 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/irq.h @@ -0,0 +1,33 @@ +#ifndef __ASM_RC32434_IRQ_H +#define __ASM_RC32434_IRQ_H + +#define NR_IRQS 256 + +#include +#include + +/* Interrupt Controller */ +#define IC_GROUP0_PEND (REGBASE + 0x38000) +#define IC_GROUP0_MASK (REGBASE + 0x38008) +#define IC_GROUP_OFFSET 0x0C + +#define NUM_INTR_GROUPS 5 + +/* 16550 UARTs */ +#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */ + /* GRP3 IRQ numbers start here */ +#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32) + /* GRP4 IRQ numbers start here */ +#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32) + /* GRP5 IRQ numbers start here */ +#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32) +#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32) + +#define UART0_IRQ (GROUP3_IRQ_BASE + 0) + +#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0) +#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1) +#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9) +#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10) + +#endif /* __ASM_RC32434_IRQ_H */ diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h new file mode 100644 index 000000000000..410638f2af74 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/pci.h @@ -0,0 +1,481 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Copyright 2004 IDT Inc. (rischelp@idt.com) + * + * Initial Release + */ + +#ifndef _ASM_RC32434_PCI_H_ +#define _ASM_RC32434_PCI_H_ + +#define epld_mask ((volatile unsigned char *)0xB900000d) + +#define PCI0_BASE_ADDR 0x18080000 +#define PCI_LBA_COUNT 4 + +struct pci_map { + u32 address; /* Address. */ + u32 control; /* Control. */ + u32 mapping; /* mapping. */ +}; + +struct pci_reg { + u32 pcic; + u32 pcis; + u32 pcism; + u32 pcicfga; + u32 pcicfgd; + volatile struct pci_map pcilba[PCI_LBA_COUNT]; + u32 pcidac; + u32 pcidas; + u32 pcidasm; + u32 pcidad; + u32 pcidma8c; + u32 pcidma9c; + u32 pcitc; +}; + +#define PCI_MSU_COUNT 2 + +struct pci_msu { + u32 pciim[PCI_MSU_COUNT]; + u32 pciom[PCI_MSU_COUNT]; + u32 pciid; + u32 pciiic; + u32 pciiim; + u32 pciiod; + u32 pciioic; + u32 pciioim; +}; + +/* + * PCI Control Register + */ + +#define PCI_CTL_EN (1 << 0) +#define PCI_CTL_TNR (1 << 1) +#define PCI_CTL_SCE (1 << 2) +#define PCI_CTL_IEN (1 << 3) +#define PCI_CTL_AAA (1 << 4) +#define PCI_CTL_EAP (1 << 5) +#define PCI_CTL_PCIM_BIT 6 +#define PCI_CTL_PCIM 0x000001c0 + +#define PCI_CTL_PCIM_DIS 0 +#define PCI_CTL_PCIM_TNR 1 /* Satellite - target not ready */ +#define PCI_CTL_PCIM_SUS 2 /* Satellite - suspended CPU. */ +#define PCI_CTL_PCIM_EXT 3 /* Host - external arbiter. */ +#define PCI_CTL PCIM_PRIO 4 /* Host - fixed priority arb. */ +#define PCI_CTL_PCIM_RR 5 /* Host - round robin priority. */ +#define PCI_CTL_PCIM_RSVD6 6 +#define PCI_CTL_PCIM_RSVD7 7 + +#define PCI_CTL_IGM (1 << 9) + +/* + * PCI Status Register + */ + +#define PCI_STAT_EED (1 << 0) +#define PCI_STAT_WR (1 << 1) +#define PCI_STAT_NMI (1 << 2) +#define PCI_STAT_II (1 << 3) +#define PCI_STAT_CWE (1 << 4) +#define PCI_STAT_CRE (1 << 5) +#define PCI_STAT_MDPE (1 << 6) +#define PCI_STAT_STA (1 << 7) +#define PCI_STAT_RTA (1 << 8) +#define PCI_STAT_RMA (1 << 9) +#define PCI_STAT_SSE (1 << 10) +#define PCI_STAT_OSE (1 << 11) +#define PCI_STAT_PE (1 << 12) +#define PCI_STAT_TAE (1 << 13) +#define PCI_STAT_RLE (1 << 14) +#define PCI_STAT_BME (1 << 15) +#define PCI_STAT_PRD (1 << 16) +#define PCI_STAT_RIP (1 << 17) + +/* + * PCI Status Mask Register + */ + +#define PCI_STATM_EED PCI_STAT_EED +#define PCI_STATM_WR PCI_STAT_WR +#define PCI_STATM_NMI PCI_STAT_NMI +#define PCI_STATM_II PCI_STAT_II +#define PCI_STATM_CWE PCI_STAT_CWE +#define PCI_STATM_CRE PCI_STAT_CRE +#define PCI_STATM_MDPE PCI_STAT_MDPE +#define PCI_STATM_STA PCI_STAT_STA +#define PCI_STATM_RTA PCI_STAT_RTA +#define PCI_STATM_RMA PCI_STAT_RMA +#define PCI_STATM_SSE PCI_STAT_SSE +#define PCI_STATM_OSE PCI_STAT_OSE +#define PCI_STATM_PE PCI_STAT_PE +#define PCI_STATM_TAE PCI_STAT_TAE +#define PCI_STATM_RLE PCI_STAT_RLE +#define PCI_STATM_BME PCI_STAT_BME +#define PCI_STATM_PRD PCI_STAT_PRD +#define PCI_STATM_RIP PCI_STAT_RIP + +/* + * PCI Configuration Address Register + */ +#define PCI_CFGA_REG_BIT 2 +#define PCI_CFGA_REG 0x000000fc +#define PCI_CFGA_REG_ID (0x00 >> 2) /* use PCFGID */ +#define PCI_CFGA_REG_04 (0x04 >> 2) /* use PCFG04_ */ +#define PCI_CFGA_REG_08 (0x08 >> 2) /* use PCFG08_ */ +#define PCI_CFGA_REG_0C (0x0C >> 2) /* use PCFG0C_ */ +#define PCI_CFGA_REG_PBA0 (0x10 >> 2) /* use PCIPBA_ */ +#define PCI_CFGA_REG_PBA1 (0x14 >> 2) /* use PCIPBA_ */ +#define PCI_CFGA_REG_PBA2 (0x18 >> 2) /* use PCIPBA_ */ +#define PCI_CFGA_REG_PBA3 (0x1c >> 2) /* use PCIPBA_ */ +#define PCI_CFGA_REG_SUBSYS (0x2c >> 2) /* use PCFGSS_ */ +#define PCI_CFGA_REG_3C (0x3C >> 2) /* use PCFG3C_ */ +#define PCI_CFGA_REG_PBBA0C (0x44 >> 2) /* use PCIPBAC_ */ +#define PCI_CFGA_REG_PBA0M (0x48 >> 2) +#define PCI_CFGA_REG_PBA1C (0x4c >> 2) /* use PCIPBAC_ */ +#define PCI_CFGA_REG_PBA1M (0x50 >> 2) +#define PCI_CFGA_REG_PBA2C (0x54 >> 2) /* use PCIPBAC_ */ +#define PCI_CFGA_REG_PBA2M (0x58 >> 2) +#define PCI_CFGA_REG_PBA3C (0x5c >> 2) /* use PCIPBAC_ */ +#define PCI_CFGA_REG_PBA3M (0x60 >> 2) +#define PCI_CFGA_REG_PMGT (0x64 >> 2) +#define PCI_CFGA_FUNC_BIT 8 +#define PCI_CFGA_FUNC 0x00000700 +#define PCI_CFGA_DEV_BIT 11 +#define PCI_CFGA_DEV 0x0000f800 +#define PCI_CFGA_DEV_INTERN 0 +#define PCI_CFGA_BUS_BIT 16 +#define PCI CFGA_BUS 0x00ff0000 +#define PCI_CFGA_BUS_TYPE0 0 +#define PCI_CFGA_EN (1 << 31) + +/* PCI CFG04 commands */ +#define PCI_CFG04_CMD_IO_ENA (1 << 0) +#define PCI_CFG04_CMD_MEM_ENA (1 << 1) +#define PCI_CFG04_CMD_BM_ENA (1 << 2) +#define PCI_CFG04_CMD_MW_INV (1 << 4) +#define PCI_CFG04_CMD_PAR_ENA (1 << 6) +#define PCI_CFG04_CMD_SER_ENA (1 << 8) +#define PCI_CFG04_CMD_FAST_ENA (1 << 9) + +/* PCI CFG04 status fields */ +#define PCI_CFG04_STAT_BIT 16 +#define PCI_CFG04_STAT 0xffff0000 +#define PCI_CFG04_STAT_66_MHZ (1 << 21) +#define PCI_CFG04_STAT_FBB (1 << 23) +#define PCI_CFG04_STAT_MDPE (1 << 24) +#define PCI_CFG04_STAT_DST (1 << 25) +#define PCI_CFG04_STAT_STA (1 << 27) +#define PCI_CFG04_STAT_RTA (1 << 28) +#define PCI_CFG04_STAT_RMA (1 << 29) +#define PCI_CFG04_STAT_SSE (1 << 30) +#define PCI_CFG04_STAT_PE (1 << 31) + +#define PCI_PBA_MSI (1 << 0) +#define PCI_PBA_P (1 << 2) + +/* PCI PBAC registers */ +#define PCI_PBAC_MSI (1 << 0) +#define PCI_PBAC_P (1 << 1) +#define PCI_PBAC_SIZE_BIT 2 +#define PCI_PBAC_SIZE 0x0000007c +#define PCI_PBAC_SB (1 << 7) +#define PCI_PBAC_PP (1 << 8) +#define PCI_PBAC_MR_BIT 9 +#define PCI_PBAC_MR 0x00000600 +#define PCI_PBAC_MR_RD 0 +#define PCI_PBAC_MR_RD_LINE 1 +#define PCI_PBAC_MR_RD_MULT 2 +#define PCI_PBAC_MRL (1 << 11) +#define PCI_PBAC_MRM (1 << 12) +#define PCI_PBAC_TRP (1 << 13) + +#define PCI_CFG40_TRDY_TIM 0x000000ff +#define PCI_CFG40_RET_LIM 0x0000ff00 + +/* + * PCI Local Base Address [0|1|2|3] Register + */ + +#define PCI_LBA_BADDR_BIT 0 +#define PCI_LBA_BADDR 0xffffff00 + +/* + * PCI Local Base Address Control Register + */ + +#define PCI_LBAC_MSI (1 << 0) +#define PCI_LBAC_MSI_MEM 0 +#define PCI_LBAC_MSI_IO 1 +#define PCI_LBAC_SIZE_BIT 2 +#define PCI_LBAC_SIZE 0x0000007c +#define PCI_LBAC_SB (1 << 7) +#define PCI_LBAC_RT (1 << 8) +#define PCI_LBAC_RT_NO_PREF 0 +#define PCI_LBAC_RT_PREF 1 + +/* + * PCI Local Base Address [0|1|2|3] Mapping Register + */ +#define PCI_LBAM_MADDR_BIT 8 +#define PCI_LBAM_MADDR 0xffffff00 + +/* + * PCI Decoupled Access Control Register + */ +#define PCI_DAC_DEN (1 << 0) + +/* + * PCI Decoupled Access Status Register + */ +#define PCI_DAS_D (1 << 0) +#define PCI_DAS_B (1 << 1) +#define PCI_DAS_E (1 << 2) +#define PCI_DAS_OFE (1 << 3) +#define PCI_DAS_OFF (1 << 4) +#define PCI_DAS_IFE (1 << 5) +#define PCI_DAS_IFF (1 << 6) + +/* + * PCI DMA Channel 8 Configuration Register + */ +#define PCI_DMA8C_MBS_BIT 0 +#define PCI_DMA8C_MBS 0x00000fff /* Maximum Burst Size. */ +#define PCI_DMA8C_OUR (1 << 12) + +/* + * PCI DMA Channel 9 Configuration Register + */ +#define PCI_DMA9C_MBS_BIT 0 /* Maximum Burst Size. */ +#define PCI_DMA9C_MBS 0x00000fff + +/* + * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors + */ + +#define PCI_DMAD_PT_BIT 22 /* in DEVCMD field (descriptor) */ +#define PCI_DMAD_PT 0x00c00000 /* preferred transaction field */ +/* These are for reads (DMA channel 8) */ +#define PCI_DMAD_DEVCMD_MR 0 /* memory read */ +#define PCI_DMAD_DEVCMD_MRL 1 /* memory read line */ +#define PCI_DMAD_DEVCMD_MRM 2 /* memory read multiple */ +#define PCI_DMAD_DEVCMD_IOR 3 /* I/O read */ +/* These are for writes (DMA channel 9) */ +#define PCI_DMAD_DEVCMD_MW 0 /* memory write */ +#define PCI_DMAD_DEVCMD_MWI 1 /* memory write invalidate */ +#define PCI_DMAD_DEVCMD_IOW 3 /* I/O write */ + +/* Swap byte field applies to both DMA channel 8 and 9 */ +#define PCI_DMAD_SB (1 << 24) /* swap byte field */ + + +/* + * PCI Target Control Register + */ + +#define PCI_TC_RTIMER_BIT 0 +#define PCI_TC_RTIMER 0x000000ff +#define PCI_TC_DTIMER_BIT 8 +#define PCI_TC_DTIMER 0x0000ff00 +#define PCI_TC_RDR (1 << 18) +#define PCI_TC_DDT (1 << 19) + +/* + * PCI messaging unit [applies to both inbound and outbound registers ] + */ +#define PCI_MSU_M0 (1 << 0) +#define PCI_MSU_M1 (1 << 1) +#define PCI_MSU_DB (1 << 2) + +#define PCI_MSG_ADDR 0xB8088010 +#define PCI0_ADDR 0xB8080000 +#define rc32434_pci ((struct pci_reg *) PCI0_ADDR) +#define rc32434_pci_msg ((struct pci_msu *) PCI_MSG_ADDR) + +#define PCIM_SHFT 0x6 +#define PCIM_BIT_LEN 0x7 +#define PCIM_H_EA 0x3 +#define PCIM_H_IA_FIX 0x4 +#define PCIM_H_IA_RR 0x5 +#if 0 +#define PCI_ADDR_START 0x13000000 +#endif + +#define PCI_ADDR_START 0x50000000 + +#define CPUTOPCI_MEM_WIN 0x02000000 +#define CPUTOPCI_IO_WIN 0x00100000 +#define PCILBA_SIZE_SHFT 2 +#define PCILBA_SIZE_MASK 0x1F +#define SIZE_256MB 0x1C +#define SIZE_128MB 0x1B +#define SIZE_64MB 0x1A +#define SIZE_32MB 0x19 +#define SIZE_16MB 0x18 +#define SIZE_4MB 0x16 +#define SIZE_2MB 0x15 +#define SIZE_1MB 0x14 +#define KORINA_CONFIG0_ADDR 0x80000000 +#define KORINA_CONFIG1_ADDR 0x80000004 +#define KORINA_CONFIG2_ADDR 0x80000008 +#define KORINA_CONFIG3_ADDR 0x8000000C +#define KORINA_CONFIG4_ADDR 0x80000010 +#define KORINA_CONFIG5_ADDR 0x80000014 +#define KORINA_CONFIG6_ADDR 0x80000018 +#define KORINA_CONFIG7_ADDR 0x8000001C +#define KORINA_CONFIG8_ADDR 0x80000020 +#define KORINA_CONFIG9_ADDR 0x80000024 +#define KORINA_CONFIG10_ADDR 0x80000028 +#define KORINA_CONFIG11_ADDR 0x8000002C +#define KORINA_CONFIG12_ADDR 0x80000030 +#define KORINA_CONFIG13_ADDR 0x80000034 +#define KORINA_CONFIG14_ADDR 0x80000038 +#define KORINA_CONFIG15_ADDR 0x8000003C +#define KORINA_CONFIG16_ADDR 0x80000040 +#define KORINA_CONFIG17_ADDR 0x80000044 +#define KORINA_CONFIG18_ADDR 0x80000048 +#define KORINA_CONFIG19_ADDR 0x8000004C +#define KORINA_CONFIG20_ADDR 0x80000050 +#define KORINA_CONFIG21_ADDR 0x80000054 +#define KORINA_CONFIG22_ADDR 0x80000058 +#define KORINA_CONFIG23_ADDR 0x8000005C +#define KORINA_CONFIG24_ADDR 0x80000060 +#define KORINA_CONFIG25_ADDR 0x80000064 +#define KORINA_CMD (PCI_CFG04_CMD_IO_ENA | \ + PCI_CFG04_CMD_MEM_ENA | \ + PCI_CFG04_CMD_BM_ENA | \ + PCI_CFG04_CMD_MW_INV | \ + PCI_CFG04_CMD_PAR_ENA | \ + PCI_CFG04_CMD_SER_ENA) + +#define KORINA_STAT (PCI_CFG04_STAT_MDPE | \ + PCI_CFG04_STAT_STA | \ + PCI_CFG04_STAT_RTA | \ + PCI_CFG04_STAT_RMA | \ + PCI_CFG04_STAT_SSE | \ + PCI_CFG04_STAT_PE) + +#define KORINA_CNFG1 ((KORINA_STAT<<16)|KORINA_CMD) + +#define KORINA_REVID 0 +#define KORINA_CLASS_CODE 0 +#define KORINA_CNFG2 ((KORINA_CLASS_CODE<<8) | \ + KORINA_REVID) + +#define KORINA_CACHE_LINE_SIZE 4 +#define KORINA_MASTER_LAT 0x3c +#define KORINA_HEADER_TYPE 0 +#define KORINA_BIST 0 + +#define KORINA_CNFG3 ((KORINA_BIST << 24) | \ + (KORINA_HEADER_TYPE<<16) | \ + (KORINA_MASTER_LAT<<8) | \ + KORINA_CACHE_LINE_SIZE) + +#define KORINA_BAR0 0x00000008 /* 128 MB Memory */ +#define KORINA_BAR1 0x18800001 /* 1 MB IO */ +#define KORINA_BAR2 0x18000001 /* 2 MB IO window for Korina + internal Registers */ +#define KORINA_BAR3 0x48000008 /* Spare 128 MB Memory */ + +#define KORINA_CNFG4 KORINA_BAR0 +#define KORINA_CNFG5 KORINA_BAR1 +#define KORINA_CNFG6 KORINA_BAR2 +#define KORINA_CNFG7 KORINA_BAR3 + +#define KORINA_SUBSYS_VENDOR_ID 0x011d +#define KORINA_SUBSYSTEM_ID 0x0214 +#define KORINA_CNFG8 0 +#define KORINA_CNFG9 0 +#define KORINA_CNFG10 0 +#define KORINA_CNFG11 ((KORINA_SUBSYS_VENDOR_ID<<16) | \ + KORINA_SUBSYSTEM_ID) +#define KORINA_INT_LINE 1 +#define KORINA_INT_PIN 1 +#define KORINA_MIN_GNT 8 +#define KORINA_MAX_LAT 0x38 +#define KORINA_CNFG12 0 +#define KORINA_CNFG13 0 +#define KORINA_CNFG14 0 +#define KORINA_CNFG15 ((KORINA_MAX_LAT<<24) | \ + (KORINA_MIN_GNT<<16) | \ + (KORINA_INT_PIN<<8) | \ + KORINA_INT_LINE) +#define KORINA_RETRY_LIMIT 0x80 +#define KORINA_TRDY_LIMIT 0x80 +#define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \ + KORINA_TRDY_LIMIT) +#define PCI_PBAxC_R 0x0 +#define PCI_PBAxC_RL 0x1 +#define PCI_PBAxC_RM 0x2 +#define SIZE_SHFT 2 + +#if defined(__MIPSEB__) +#define KORINA_PBA0C (PCI_PBAC_MRL | PCI_PBAC_SB | \ + ((PCI_PBAxC_RM & 0x3) << PCI_PBAC_MR_BIT) | \ + PCI_PBAC_PP | \ + (SIZE_128MB< + * Copyright 2008 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#define PROM_ENTRY(x) (0xbfc00000 + ((x) * 8)) + +#define SR_NMI 0x00180000 +#define SERIAL_SPEED_ENTRY 0x00000001 + +#define FREQ_TAG "HZ=" +#define KMAC_TAG "kmac=" +#define MEM_TAG "mem=" +#define BOARD_TAG "board=" + +#define BOARD_RB532 "500" +#define BOARD_RB532A "500r5" diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h new file mode 100644 index 000000000000..79e8ef67d0d3 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/rb.h @@ -0,0 +1,84 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2004 IDT Inc. + * Copyright (C) 2006 Felix Fietkau + */ +#ifndef __ASM_RC32434_RB_H +#define __ASM_RC32434_RB_H + +#include + +#define REGBASE 0x18000000 +#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(REGBASE)) +#define UART0BASE 0x58000 +#define RST (1 << 15) +#define DEV0BASE 0x010000 +#define DEV0MASK 0x010004 +#define DEV0C 0x010008 +#define DEV0T 0x01000C +#define DEV1BASE 0x010010 +#define DEV1MASK 0x010014 +#define DEV1C 0x010018 +#define DEV1TC 0x01001C +#define DEV2BASE 0x010020 +#define DEV2MASK 0x010024 +#define DEV2C 0x010028 +#define DEV2TC 0x01002C +#define DEV3BASE 0x010030 +#define DEV3MASK 0x010034 +#define DEV3C 0x010038 +#define DEV3TC 0x01003C +#define BTCS 0x010040 +#define BTCOMPARE 0x010044 +#define GPIOBASE 0x050000 +#define GPIOCFG 0x050004 +#define GPIOD 0x050008 +#define GPIOILEVEL 0x05000C +#define GPIOISTAT 0x050010 +#define GPIONMIEN 0x050014 +#define IMASK6 0x038038 +#define LO_WPX (1 << 0) +#define LO_ALE (1 << 1) +#define LO_CLE (1 << 2) +#define LO_CEX (1 << 3) +#define LO_FOFF (1 << 5) +#define LO_SPICS (1 << 6) +#define LO_ULED (1 << 7) + +#define BIT_TO_MASK(x) (1 << x) + +struct dev_reg { + u32 base; + u32 mask; + u32 ctl; + u32 timing; +}; + +struct korina_device { + char *name; + unsigned char mac[6]; + struct net_device *dev; +}; + +struct cf_device { + int gpio_pin; + void *dev; + struct gendisk *gd; +}; + +struct mpmc_device { + unsigned char state; + spinlock_t lock; + void __iomem *base; +}; + +#endif /* __ASM_RC32434_RB_H */ diff --git a/arch/mips/include/asm/mach-rc32434/rc32434.h b/arch/mips/include/asm/mach-rc32434/rc32434.h new file mode 100644 index 000000000000..fce25d4231fc --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/rc32434.h @@ -0,0 +1,19 @@ +/* + * Definitions for IDT RC323434 CPU. + */ + +#ifndef _ASM_RC32434_RC32434_H_ +#define _ASM_RC32434_RC32434_H_ + +#include +#include + +#define IDT_CLOCK_MULT 2 + +/* cpu pipeline flush */ +static inline void rc32434_sync(void) +{ + __asm__ volatile ("sync"); +} + +#endif /* _ASM_RC32434_RC32434_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/timer.h b/arch/mips/include/asm/mach-rc32434/timer.h new file mode 100644 index 000000000000..e49b1d57a017 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/timer.h @@ -0,0 +1,65 @@ +/* + * Definitions for timer registers + * + * Copyright 2004 Philip Rischel + * Copyright 2008 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __ASM_RC32434_TIMER_H +#define __ASM_RC32434_TIMER_H + +#include + +#define TIMER0_BASE_ADDR 0x18028000 +#define TIMER_COUNT 3 + +struct timer_counter { + u32 count; + u32 compare; + u32 ctc; /*use CTC_ */ +}; + +struct timer { + struct timer_counter tim[TIMER_COUNT]; + u32 rcount; /* use RCOUNT_ */ + u32 rcompare; /* use RCOMPARE_ */ + u32 rtc; /* use RTC_ */ +}; + +#define RC32434_CTC_EN_BIT 0 +#define RC32434_CTC_TO_BIT 1 + +/* Real time clock registers */ +#define RC32434_RTC_MSK(x) BIT_TO_MASK(x) +#define RC32434_RTC_CE_BIT 0 +#define RC32434_RTC_TO_BIT 1 +#define RC32434_RTC_RQE_BIT 2 + +/* Counter registers */ +#define RC32434_RCOUNT_BIT 0 +#define RC32434_RCOUNT_MSK 0x0000ffff +#define RC32434_RCOMP_BIT 0 +#define RC32434_RCOMP_MSK 0x0000ffff + +#endif /* __ASM_RC32434_TIMER_H */ diff --git a/arch/mips/include/asm/mach-rc32434/war.h b/arch/mips/include/asm/mach-rc32434/war.h new file mode 100644 index 000000000000..3ddf187e98a6 --- /dev/null +++ b/arch/mips/include/asm/mach-rc32434/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_MIPS_WAR_H +#define __ASM_MIPS_MACH_MIPS_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 1 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ diff --git a/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h new file mode 100644 index 000000000000..ccf543363537 --- /dev/null +++ b/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h @@ -0,0 +1,43 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org) + * + * SNI RM200 C apparently was only shipped with R4600 V2.0 and R5000 processors. + */ +#ifndef __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H + +#include + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +#define cpu_has_fpu 1 +#define cpu_has_32fpr 1 +#define cpu_has_counter 1 +#define cpu_has_watch 0 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_cache_cdex_p 1 +#define cpu_has_prefetch 0 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-rm/mc146818rtc.h b/arch/mips/include/asm/mach-rm/mc146818rtc.h new file mode 100644 index 000000000000..145bce096fe9 --- /dev/null +++ b/arch/mips/include/asm/mach-rm/mc146818rtc.h @@ -0,0 +1,21 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 by Ralf Baechle + * + * RTC routines for PC style attached Dallas chip with ARC epoch. + */ +#ifndef __ASM_MACH_RM_MC146818RTC_H +#define __ASM_MACH_RM_MC146818RTC_H + +#ifdef CONFIG_CPU_BIG_ENDIAN +#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) +#else +#define mc146818_decode_year(year) ((year) + 1980) +#endif + +#include_next + +#endif /* __ASM_MACH_RM_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-rm/war.h b/arch/mips/include/asm/mach-rm/war.h new file mode 100644 index 000000000000..948d3129a114 --- /dev/null +++ b/arch/mips/include/asm/mach-rm/war.h @@ -0,0 +1,29 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_RM_WAR_H +#define __ASM_MIPS_MACH_RM_WAR_H + +/* + * The RM200C seems to have been shipped only with V2.0 R4600s + */ + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 1 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_RM_WAR_H */ diff --git a/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h new file mode 100644 index 000000000000..1c1f92415b9a --- /dev/null +++ b/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h @@ -0,0 +1,47 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H + +/* + * Sibyte are MIPS64 processors wired to a specific configuration + */ +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 1 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 1 +#define cpu_has_ejtag 1 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 1 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 +#define cpu_icache_snoops_remote_store 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 1 +#define cpu_has_mips64r2 0 + +#define cpu_has_inclusive_pcaches 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 +#define cpu_scache_line_size() 32 + +#endif /* __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h new file mode 100644 index 000000000000..7950ef4f032c --- /dev/null +++ b/arch/mips/include/asm/mach-sibyte/war.h @@ -0,0 +1,37 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_SIBYTE_WAR_H +#define __ASM_MIPS_MACH_SIBYTE_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 + +#if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \ + defined(CONFIG_SB1_PASS_2_WORKAROUNDS) + +#define BCM1250_M3_WAR 1 +#define SIBYTE_1956_WAR 1 + +#else + +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 + +#endif + +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_SIBYTE_WAR_H */ diff --git a/arch/mips/include/asm/mach-tx39xx/ioremap.h b/arch/mips/include/asm/mach-tx39xx/ioremap.h new file mode 100644 index 000000000000..93c6c04ffda3 --- /dev/null +++ b/arch/mips/include/asm/mach-tx39xx/ioremap.h @@ -0,0 +1,38 @@ +/* + * include/asm-mips/mach-tx39xx/ioremap.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MACH_TX39XX_IOREMAP_H +#define __ASM_MACH_TX39XX_IOREMAP_H + +#include + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ +#define TXX9_DIRECTMAP_BASE 0xff000000ul + if (offset >= TXX9_DIRECTMAP_BASE && + offset < TXX9_DIRECTMAP_BASE + 0xff0000) + return (void __iomem *)offset; + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return (unsigned long)addr >= TXX9_DIRECTMAP_BASE; +} + +#endif /* __ASM_MACH_TX39XX_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-tx39xx/mangle-port.h b/arch/mips/include/asm/mach-tx39xx/mangle-port.h new file mode 100644 index 000000000000..ef0b502fd8b7 --- /dev/null +++ b/arch/mips/include/asm/mach-tx39xx/mangle-port.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_TX39XX_MANGLE_PORT_H +#define __ASM_MACH_TX39XX_MANGLE_PORT_H + +#if defined(CONFIG_TOSHIBA_JMR3927) +extern unsigned long (*__swizzle_addr_b)(unsigned long port); +#define NEEDS_TXX9_SWIZZLE_ADDR_B +#else +#define __swizzle_addr_b(port) (port) +#endif +#define __swizzle_addr_w(port) (port) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +#define ioswabb(a, x) (x) +#define __mem_ioswabb(a, x) (x) +#define ioswabw(a, x) le16_to_cpu(x) +#define __mem_ioswabw(a, x) (x) +#define ioswabl(a, x) le32_to_cpu(x) +#define __mem_ioswabl(a, x) (x) +#define ioswabq(a, x) le64_to_cpu(x) +#define __mem_ioswabq(a, x) (x) + +#endif /* __ASM_MACH_TX39XX_MANGLE_PORT_H */ diff --git a/arch/mips/include/asm/mach-tx39xx/war.h b/arch/mips/include/asm/mach-tx39xx/war.h new file mode 100644 index 000000000000..433814616359 --- /dev/null +++ b/arch/mips/include/asm/mach-tx39xx/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_TX39XX_WAR_H +#define __ASM_MIPS_MACH_TX39XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_TX39XX_WAR_H */ diff --git a/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h new file mode 100644 index 000000000000..275eaf92c748 --- /dev/null +++ b/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_llsc 1 +#define cpu_has_64bits 1 +#define cpu_has_inclusive_pcaches 0 + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-tx49xx/ioremap.h b/arch/mips/include/asm/mach-tx49xx/ioremap.h new file mode 100644 index 000000000000..1e7beae72229 --- /dev/null +++ b/arch/mips/include/asm/mach-tx49xx/ioremap.h @@ -0,0 +1,43 @@ +/* + * include/asm-mips/mach-tx49xx/ioremap.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MACH_TX49XX_IOREMAP_H +#define __ASM_MACH_TX49XX_IOREMAP_H + +#include + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ +#ifdef CONFIG_64BIT +#define TXX9_DIRECTMAP_BASE 0xfff000000ul +#else +#define TXX9_DIRECTMAP_BASE 0xff000000ul +#endif + if (offset >= TXX9_DIRECTMAP_BASE && + offset < TXX9_DIRECTMAP_BASE + 0x400000) + return (void __iomem *)(unsigned long)(int)offset; + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return (unsigned long)addr >= + (unsigned long)(int)(TXX9_DIRECTMAP_BASE & 0xffffffff); +} + +#endif /* __ASM_MACH_TX49XX_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-tx49xx/kmalloc.h b/arch/mips/include/asm/mach-tx49xx/kmalloc.h new file mode 100644 index 000000000000..913ff196259d --- /dev/null +++ b/arch/mips/include/asm/mach-tx49xx/kmalloc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_MACH_TX49XX_KMALLOC_H +#define __ASM_MACH_TX49XX_KMALLOC_H + +/* + * All happy, no need to define ARCH_KMALLOC_MINALIGN + */ + +#endif /* __ASM_MACH_TX49XX_KMALLOC_H */ diff --git a/arch/mips/include/asm/mach-tx49xx/war.h b/arch/mips/include/asm/mach-tx49xx/war.h new file mode 100644 index 000000000000..39b5d1177c57 --- /dev/null +++ b/arch/mips/include/asm/mach-tx49xx/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_TX49XX_WAR_H +#define __ASM_MIPS_MACH_TX49XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 1 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_TX49XX_WAR_H */ diff --git a/arch/mips/include/asm/mach-vr41xx/irq.h b/arch/mips/include/asm/mach-vr41xx/irq.h new file mode 100644 index 000000000000..862058d3f81b --- /dev/null +++ b/arch/mips/include/asm/mach-vr41xx/irq.h @@ -0,0 +1,8 @@ +#ifndef __ASM_MACH_VR41XX_IRQ_H +#define __ASM_MACH_VR41XX_IRQ_H + +#include /* for MIPS_CPU_IRQ_BASE */ + +#include_next + +#endif /* __ASM_MACH_VR41XX_IRQ_H */ diff --git a/arch/mips/include/asm/mach-vr41xx/war.h b/arch/mips/include/asm/mach-vr41xx/war.h new file mode 100644 index 000000000000..56a38926412a --- /dev/null +++ b/arch/mips/include/asm/mach-vr41xx/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_VR41XX_WAR_H +#define __ASM_MIPS_MACH_VR41XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_VR41XX_WAR_H */ diff --git a/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h new file mode 100644 index 000000000000..83746b84a5ec --- /dev/null +++ b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h @@ -0,0 +1,83 @@ +/* + * This is a direct copy of the ev96100.h file, with a global + * search and replace. The numbers are the same. + * + * The reason I'm duplicating this is so that the 64120/96100 + * defines won't be confusing in the source code. + */ +#ifndef __ASM_MIPS_GT64120_H +#define __ASM_MIPS_GT64120_H + +/* + * This is the CPU physical memory map of PPMC Board: + * + * 0x00000000-0x03FFFFFF - 64MB SDRAM (SCS[0]#) + * 0x1C000000-0x1C000000 - LED (CS0) + * 0x1C800000-0x1C800007 - UART 16550 port (CS1) + * 0x1F000000-0x1F000000 - MailBox (CS3) + * 0x1FC00000-0x20000000 - 4MB Flash (BOOT CS) + */ + +#define WRPPMC_SDRAM_SCS0_BASE 0x00000000 +#define WRPPMC_SDRAM_SCS0_SIZE 0x04000000 + +#define WRPPMC_UART16550_BASE 0x1C800000 +#define WRPPMC_UART16550_CLOCK 3686400 /* 3.68MHZ */ + +#define WRPPMC_LED_BASE 0x1C000000 +#define WRPPMC_MBOX_BASE 0x1F000000 + +#define WRPPMC_BOOTROM_BASE 0x1FC00000 +#define WRPPMC_BOOTROM_SIZE 0x00400000 /* 4M Flash */ + +#define WRPPMC_MIPS_TIMER_IRQ 7 /* MIPS compare/count timer interrupt */ +#define WRPPMC_UART16550_IRQ 6 +#define WRPPMC_PCI_INTA_IRQ 3 + +/* + * PCI Bus I/O and Memory resources allocation + * + * NOTE: We only have PCI_0 hose interface + */ +#define GT_PCI_MEM_BASE 0x13000000UL +#define GT_PCI_MEM_SIZE 0x02000000UL +#define GT_PCI_IO_BASE 0x11000000UL +#define GT_PCI_IO_SIZE 0x02000000UL + +/* + * PCI interrupts will come in on either the INTA or INTD interrupt lines, + * which are mapped to the #2 and #5 interrupt pins of the MIPS. On our + * boards, they all either come in on IntD or they all come in on IntA, they + * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the + * "requested" interrupt numbers and go through the list whenever we get an + * IntA/D. + * + * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and + * INTD is 11. + */ +#define GT_TIMER 4 +#define GT_INTA 2 +#define GT_INTD 5 + +#ifndef __ASSEMBLY__ + +/* + * GT64120 internal register space base address + */ +extern unsigned long gt64120_base; + +#define GT64120_BASE (gt64120_base) + +/* define WRPPMC_EARLY_DEBUG to enable early output something to UART */ +#undef WRPPMC_EARLY_DEBUG + +#ifdef WRPPMC_EARLY_DEBUG +extern void wrppmc_led_on(int mask); +extern void wrppmc_led_off(int mask); +extern void wrppmc_early_printk(const char *fmt, ...); +#else +#define wrppmc_early_printk(fmt, ...) do {} while (0) +#endif /* WRPPMC_EARLY_DEBUG */ + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_MIPS_GT64120_H */ diff --git a/arch/mips/include/asm/mach-wrppmc/war.h b/arch/mips/include/asm/mach-wrppmc/war.h new file mode 100644 index 000000000000..ac48629bb1ce --- /dev/null +++ b/arch/mips/include/asm/mach-wrppmc/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_WRPPMC_WAR_H +#define __ASM_MIPS_MACH_WRPPMC_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_WRPPMC_WAR_H */ diff --git a/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h new file mode 100644 index 000000000000..470e5e9e10d6 --- /dev/null +++ b/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h @@ -0,0 +1,47 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H + +/* + * Momentum Jaguar ATX always has the RM9000 processor. + */ +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 +#define cpu_icache_snoops_remote_store 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_inclusive_pcaches 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 +#define cpu_scache_line_size() 32 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#endif /* __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-yosemite/war.h b/arch/mips/include/asm/mach-yosemite/war.h new file mode 100644 index 000000000000..e5c6d53efc86 --- /dev/null +++ b/arch/mips/include/asm/mach-yosemite/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_YOSEMITE_WAR_H +#define __ASM_MIPS_MACH_YOSEMITE_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 1 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_YOSEMITE_WAR_H */ diff --git a/arch/mips/include/asm/mc146818-time.h b/arch/mips/include/asm/mc146818-time.h new file mode 100644 index 000000000000..cdc379a0a94e --- /dev/null +++ b/arch/mips/include/asm/mc146818-time.h @@ -0,0 +1,119 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Machine dependent access functions for RTC registers. + */ +#ifndef __ASM_MC146818_TIME_H +#define __ASM_MC146818_TIME_H + +#include +#include +#include + +/* + * For check timing call set_rtc_mmss() 500ms; used in timer interrupt. + */ +#define USEC_AFTER 500000 +#define USEC_BEFORE 500000 + +/* + * In order to set the CMOS clock precisely, set_rtc_mmss has to be + * called 500 ms after the second nowtime has started, because when + * nowtime is written into the registers of the CMOS clock, it will + * jump to the next second precisely 500 ms later. Check the Motorola + * MC146818A or Dallas DS12887 data sheet for details. + * + * BUG: This routine does not handle hour overflow properly; it just + * sets the minutes. Usually you'll only notice that after reboot! + */ +static inline int mc146818_set_rtc_mmss(unsigned long nowtime) +{ + int real_seconds, real_minutes, cmos_minutes; + unsigned char save_control, save_freq_select; + int retval = 0; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ + CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); + + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ + CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + cmos_minutes = CMOS_READ(RTC_MINUTES); + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) + BCD_TO_BIN(cmos_minutes); + + /* + * since we're only adjusting minutes and seconds, + * don't interfere with hour overflow. This avoids + * messing with unknown time zones but requires your + * RTC not to be off by more than 15 minutes + */ + real_seconds = nowtime % 60; + real_minutes = nowtime / 60; + if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) + real_minutes += 30; /* correct for half hour time zone */ + real_minutes %= 60; + + if (abs(real_minutes - cmos_minutes) < 30) { + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BIN_TO_BCD(real_seconds); + BIN_TO_BCD(real_minutes); + } + CMOS_WRITE(real_seconds, RTC_SECONDS); + CMOS_WRITE(real_minutes, RTC_MINUTES); + } else { + printk(KERN_WARNING + "set_rtc_mmss: can't update from %d to %d\n", + cmos_minutes, real_minutes); + retval = -1; + } + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + spin_unlock_irqrestore(&rtc_lock, flags); + + return retval; +} + +static inline unsigned long mc146818_get_cmos_time(void) +{ + unsigned int year, mon, day, hour, min, sec; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + + do { + sec = CMOS_READ(RTC_SECONDS); + min = CMOS_READ(RTC_MINUTES); + hour = CMOS_READ(RTC_HOURS); + day = CMOS_READ(RTC_DAY_OF_MONTH); + mon = CMOS_READ(RTC_MONTH); + year = CMOS_READ(RTC_YEAR); + } while (sec != CMOS_READ(RTC_SECONDS)); + + if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(day); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + } + spin_unlock_irqrestore(&rtc_lock, flags); + year = mc146818_decode_year(year); + + return mktime(year, mon, day, hour, min, sec); +} + +#endif /* __ASM_MC146818_TIME_H */ diff --git a/arch/mips/include/asm/mc146818rtc.h b/arch/mips/include/asm/mc146818rtc.h new file mode 100644 index 000000000000..68b4da6d520b --- /dev/null +++ b/arch/mips/include/asm/mc146818rtc.h @@ -0,0 +1,16 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Machine dependent access functions for RTC registers. + * + * Copyright (C) 1996, 1997, 1998, 2000 Ralf Baechle + * Copyright (C) 2002 Maciej W. Rozycki + */ +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + +#include + +#endif /* _ASM_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h new file mode 100644 index 000000000000..a0f04bb99c99 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/bonito64.h @@ -0,0 +1,436 @@ +/* + * Bonito Register Map + * + * This file is the original bonito.h from Algorithmics with minor changes + * to fit into linux. + * + * Copyright (c) 1999 Algorithmics Ltd + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2001 MIPS Technologies, Inc. All rights reserved. + * + * Algorithmics gives permission for anyone to use and modify this file + * without any obligation or license condition except that you retain + * this copyright message in any source redistribution in whole or part. + * + */ + +/* Revision 1.48 autogenerated on 08/17/99 15:20:01 */ +/* This bonito64 version editted from bonito.h Revision 1.48 on 11/09/00 */ + +#ifndef _ASM_MIPS_BOARDS_BONITO64_H +#define _ASM_MIPS_BOARDS_BONITO64_H + +#ifdef __ASSEMBLY__ + +/* offsets from base register */ +#define BONITO(x) (x) + +#elif defined(CONFIG_LEMOTE_FULONG) + +#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x))) +#define BONITO_IRQ_BASE 32 + +#else + +/* + * Algorithmics Bonito64 system controller register base. + */ +extern unsigned long _pcictrl_bonito; +extern unsigned long _pcictrl_bonito_pcicfg; + +#define BONITO(x) *(volatile u32 *)(_pcictrl_bonito + (x)) + +#endif /* __ASSEMBLY__ */ + + +#define BONITO_BOOT_BASE 0x1fc00000 +#define BONITO_BOOT_SIZE 0x00100000 +#define BONITO_BOOT_TOP (BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1) +#define BONITO_FLASH_BASE 0x1c000000 +#define BONITO_FLASH_SIZE 0x03000000 +#define BONITO_FLASH_TOP (BONITO_FLASH_BASE+BONITO_FLASH_SIZE-1) +#define BONITO_SOCKET_BASE 0x1f800000 +#define BONITO_SOCKET_SIZE 0x00400000 +#define BONITO_SOCKET_TOP (BONITO_SOCKET_BASE+BONITO_SOCKET_SIZE-1) +#define BONITO_REG_BASE 0x1fe00000 +#define BONITO_REG_SIZE 0x00040000 +#define BONITO_REG_TOP (BONITO_REG_BASE+BONITO_REG_SIZE-1) +#define BONITO_DEV_BASE 0x1ff00000 +#define BONITO_DEV_SIZE 0x00100000 +#define BONITO_DEV_TOP (BONITO_DEV_BASE+BONITO_DEV_SIZE-1) +#define BONITO_PCILO_BASE 0x10000000 +#define BONITO_PCILO_SIZE 0x0c000000 +#define BONITO_PCILO_TOP (BONITO_PCILO_BASE+BONITO_PCILO_SIZE-1) +#define BONITO_PCILO0_BASE 0x10000000 +#define BONITO_PCILO1_BASE 0x14000000 +#define BONITO_PCILO2_BASE 0x18000000 +#define BONITO_PCIHI_BASE 0x20000000 +#define BONITO_PCIHI_SIZE 0x20000000 +#define BONITO_PCIHI_TOP (BONITO_PCIHI_BASE+BONITO_PCIHI_SIZE-1) +#define BONITO_PCIIO_BASE 0x1fd00000 +#define BONITO_PCIIO_SIZE 0x00100000 +#define BONITO_PCIIO_TOP (BONITO_PCIIO_BASE+BONITO_PCIIO_SIZE-1) +#define BONITO_PCICFG_BASE 0x1fe80000 +#define BONITO_PCICFG_SIZE 0x00080000 +#define BONITO_PCICFG_TOP (BONITO_PCICFG_BASE+BONITO_PCICFG_SIZE-1) + + +/* Bonito Register Bases */ + +#define BONITO_PCICONFIGBASE 0x00 +#define BONITO_REGBASE 0x100 + + +/* PCI Configuration Registers */ + +#define BONITO_PCI_REG(x) BONITO(BONITO_PCICONFIGBASE + (x)) +#define BONITO_PCIDID BONITO_PCI_REG(0x00) +#define BONITO_PCICMD BONITO_PCI_REG(0x04) +#define BONITO_PCICLASS BONITO_PCI_REG(0x08) +#define BONITO_PCILTIMER BONITO_PCI_REG(0x0c) +#define BONITO_PCIBASE0 BONITO_PCI_REG(0x10) +#define BONITO_PCIBASE1 BONITO_PCI_REG(0x14) +#define BONITO_PCIBASE2 BONITO_PCI_REG(0x18) +#define BONITO_PCIEXPRBASE BONITO_PCI_REG(0x30) +#define BONITO_PCIINT BONITO_PCI_REG(0x3c) + +#define BONITO_PCICMD_PERR_CLR 0x80000000 +#define BONITO_PCICMD_SERR_CLR 0x40000000 +#define BONITO_PCICMD_MABORT_CLR 0x20000000 +#define BONITO_PCICMD_MTABORT_CLR 0x10000000 +#define BONITO_PCICMD_TABORT_CLR 0x08000000 +#define BONITO_PCICMD_MPERR_CLR 0x01000000 +#define BONITO_PCICMD_PERRRESPEN 0x00000040 +#define BONITO_PCICMD_ASTEPEN 0x00000080 +#define BONITO_PCICMD_SERREN 0x00000100 +#define BONITO_PCILTIMER_BUSLATENCY 0x0000ff00 +#define BONITO_PCILTIMER_BUSLATENCY_SHIFT 8 + + + + +/* 1. Bonito h/w Configuration */ +/* Power on register */ + +#define BONITO_BONPONCFG BONITO(BONITO_REGBASE + 0x00) + +#define BONITO_BONPONCFG_SYSCONTROLLERRD 0x00040000 +#define BONITO_BONPONCFG_ROMCS1SAMP 0x00020000 +#define BONITO_BONPONCFG_ROMCS0SAMP 0x00010000 +#define BONITO_BONPONCFG_CPUBIGEND 0x00004000 +/* Added by RPF 11-9-00 */ +#define BONITO_BONPONCFG_BURSTORDER 0x00001000 +/* --- */ +#define BONITO_BONPONCFG_CPUPARITY 0x00002000 +#define BONITO_BONPONCFG_CPUTYPE 0x00000007 +#define BONITO_BONPONCFG_CPUTYPE_SHIFT 0 +#define BONITO_BONPONCFG_PCIRESET_OUT 0x00000008 +#define BONITO_BONPONCFG_IS_ARBITER 0x00000010 +#define BONITO_BONPONCFG_ROMBOOT 0x000000c0 +#define BONITO_BONPONCFG_ROMBOOT_SHIFT 6 + +#define BONITO_BONPONCFG_ROMBOOT_FLASH (0x0<>26) & BONITO_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) + +#define BONITO_PCIMAP_WINSIZE (1<<26) +#define BONITO_PCIMAP_WINOFFSET(ADDR) ((ADDR) & (BONITO_PCIMAP_WINSIZE - 1)) +#define BONITO_PCIMAP_WINBASE(ADDR) ((ADDR) << 26) + +/* pcimembaseCfg */ + +#define BONITO_PCIMEMBASECFG_MASK 0xf0000000 +#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK 0x0000001f +#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK_SHIFT 0 +#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS 0x000003e0 +#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS_SHIFT 5 +#define BONITO_PCIMEMBASECFG_MEMBASE0_CACHED 0x00000400 +#define BONITO_PCIMEMBASECFG_MEMBASE0_IO 0x00000800 + +#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK 0x0001f000 +#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK_SHIFT 12 +#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS 0x003e0000 +#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS_SHIFT 17 +#define BONITO_PCIMEMBASECFG_MEMBASE1_CACHED 0x00400000 +#define BONITO_PCIMEMBASECFG_MEMBASE1_IO 0x00800000 + +#define BONITO_PCIMEMBASECFG_ASHIFT 23 +#define BONITO_PCIMEMBASECFG_AMASK 0x007fffff +#define BONITO_PCIMEMBASECFGSIZE(WIN, SIZE) (((~((SIZE)-1))>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) +#define BONITO_PCIMEMBASECFGBASE(WIN, BASE) (((BASE)>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) + +#define BONITO_PCIMEMBASECFG_SIZE(WIN, CFG) (((((~(CFG)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)) << (BONITO_PCIMEMBASECFG_ASHIFT - BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) | BONITO_PCIMEMBASECFG_AMASK) + + +#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) +#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) +#define BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) + +#define BONITO_PCITOPHYS(WIN, ADDR, CFG) ( \ + (((ADDR) & (~(BONITO_PCIMEMBASECFG_MASK))) & (~(BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)))) | \ + (BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG)) \ + ) + +/* PCICmd */ + +#define BONITO_PCICMD_MEMEN 0x00000002 +#define BONITO_PCICMD_MSTREN 0x00000004 + + +#endif /* _ASM_MIPS_BOARDS_BONITO64_H */ diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h new file mode 100644 index 000000000000..7f0b034dd9a5 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/generic.h @@ -0,0 +1,104 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Defines of the MIPS boards specific address-MAP, registers, etc. + */ +#ifndef __ASM_MIPS_BOARDS_GENERIC_H +#define __ASM_MIPS_BOARDS_GENERIC_H + +#include +#include +#include + +/* + * Display register base. + */ +#define ASCII_DISPLAY_WORD_BASE 0x1f000410 +#define ASCII_DISPLAY_POS_BASE 0x1f000418 + + +/* + * Yamon Prom print address. + */ +#define YAMON_PROM_PRINT_ADDR 0x1fc00504 + + +/* + * Reset register. + */ +#define SOFTRES_REG 0x1f000500 +#define GORESET 0x42 + +/* + * Revision register. + */ +#define MIPS_REVISION_REG 0x1fc00010 +#define MIPS_REVISION_CORID_QED_RM5261 0 +#define MIPS_REVISION_CORID_CORE_LV 1 +#define MIPS_REVISION_CORID_BONITO64 2 +#define MIPS_REVISION_CORID_CORE_20K 3 +#define MIPS_REVISION_CORID_CORE_FPGA 4 +#define MIPS_REVISION_CORID_CORE_MSC 5 +#define MIPS_REVISION_CORID_CORE_EMUL 6 +#define MIPS_REVISION_CORID_CORE_FPGA2 7 +#define MIPS_REVISION_CORID_CORE_FPGAR2 8 +#define MIPS_REVISION_CORID_CORE_FPGA3 9 +#define MIPS_REVISION_CORID_CORE_24K 10 +#define MIPS_REVISION_CORID_CORE_FPGA4 11 +#define MIPS_REVISION_CORID_CORE_FPGA5 12 + +/**** Artificial corid defines ****/ +/* + * CoreEMUL with Bonito System Controller is treated like a Core20K + * CoreEMUL with SOC-it 101 System Controller is treated like a CoreMSC + */ +#define MIPS_REVISION_CORID_CORE_EMUL_BON -1 +#define MIPS_REVISION_CORID_CORE_EMUL_MSC -2 + +#define MIPS_REVISION_CORID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 10) & 0x3f) + +extern int mips_revision_corid; + +#define MIPS_REVISION_SCON_OTHER 0 +#define MIPS_REVISION_SCON_SOCITSC 1 +#define MIPS_REVISION_SCON_SOCITSCP 2 + +/* Artificial SCON defines for MIPS_REVISION_SCON_OTHER */ +#define MIPS_REVISION_SCON_UNKNOWN -1 +#define MIPS_REVISION_SCON_GT64120 -2 +#define MIPS_REVISION_SCON_BONITO -3 +#define MIPS_REVISION_SCON_BRTL -4 +#define MIPS_REVISION_SCON_SOCIT -5 +#define MIPS_REVISION_SCON_ROCIT -6 + +#define MIPS_REVISION_SCONID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 24) & 0xff) + +extern int mips_revision_sconid; + +extern void mips_reboot_setup(void); + +#ifdef CONFIG_PCI +extern void mips_pcibios_init(void); +#else +#define mips_pcibios_init() do { } while (0) +#endif + +#ifdef CONFIG_KGDB +extern void kgdb_config(void); +#endif + +#endif /* __ASM_MIPS_BOARDS_GENERIC_H */ diff --git a/arch/mips/include/asm/mips-boards/launch.h b/arch/mips/include/asm/mips-boards/launch.h new file mode 100644 index 000000000000..d8ae7f95a522 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/launch.h @@ -0,0 +1,35 @@ +/* + * + */ + +#ifndef _ASSEMBLER_ + +struct cpulaunch { + unsigned long pc; + unsigned long gp; + unsigned long sp; + unsigned long a0; + unsigned long _pad[3]; /* pad to cache line size to avoid thrashing */ + unsigned long flags; +}; + +#else + +#define LOG2CPULAUNCH 5 +#define LAUNCH_PC 0 +#define LAUNCH_GP 4 +#define LAUNCH_SP 8 +#define LAUNCH_A0 12 +#define LAUNCH_FLAGS 28 + +#endif + +#define LAUNCH_FREADY 1 +#define LAUNCH_FGO 2 +#define LAUNCH_FGONE 4 + +#define CPULAUNCH 0x00000f00 +#define NCPULAUNCH 8 + +/* Polling period in count cycles for secondary CPU's */ +#define LAUNCHPERIOD 10000 diff --git a/arch/mips/include/asm/mips-boards/malta.h b/arch/mips/include/asm/mips-boards/malta.h new file mode 100644 index 000000000000..c1891578fa65 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/malta.h @@ -0,0 +1,102 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Defines of the Malta board specific address-MAP, registers, etc. + */ +#ifndef __ASM_MIPS_BOARDS_MALTA_H +#define __ASM_MIPS_BOARDS_MALTA_H + +#include +#include +#include +#include + +/* Mips interrupt controller found in SOCit variations */ +#define MIPS_MSC01_IC_REG_BASE 0x1bc40000 +#define MIPS_SOCITSC_IC_REG_BASE 0x1ffa0000 + +/* + * Malta I/O ports base address for the Galileo GT64120 and Algorithmics + * Bonito system controllers. + */ +#define MALTA_GT_PORT_BASE get_gt_port_base(GT_PCI0IOLD_OFS) +#define MALTA_BONITO_PORT_BASE ((unsigned long)ioremap (0x1fd00000, 0x10000)) +#define MALTA_MSC_PORT_BASE get_msc_port_base(MSC01_PCI_SC2PIOBASL) + +static inline unsigned long get_gt_port_base(unsigned long reg) +{ + unsigned long addr; + addr = GT_READ(reg); + return (unsigned long) ioremap (((addr & 0xffff) << 21), 0x10000); +} + +static inline unsigned long get_msc_port_base(unsigned long reg) +{ + unsigned long addr; + MSC_READ(reg, addr); + return (unsigned long) ioremap(addr, 0x10000); +} + +/* + * GCMP Specific definitions + */ +#define GCMP_BASE_ADDR 0x1fbf8000 +#define GCMP_ADDRSPACE_SZ (256 * 1024) + +/* + * GIC Specific definitions + */ +#define GIC_BASE_ADDR 0x1bdc0000 +#define GIC_ADDRSPACE_SZ (128 * 1024) + +/* + * MSC01 BIU Specific definitions + * FIXME : These should be elsewhere ? + */ +#define MSC01_BIU_REG_BASE 0x1bc80000 +#define MSC01_BIU_ADDRSPACE_SZ (256 * 1024) +#define MSC01_SC_CFG_OFS 0x0110 +#define MSC01_SC_CFG_GICPRES_MSK 0x00000004 +#define MSC01_SC_CFG_GICPRES_SHF 2 +#define MSC01_SC_CFG_GICENA_SHF 3 + +/* + * Malta RTC-device indirect register access. + */ +#define MALTA_RTC_ADR_REG 0x70 +#define MALTA_RTC_DAT_REG 0x71 + +/* + * Malta SMSC FDC37M817 Super I/O Controller register. + */ +#define SMSC_CONFIG_REG 0x3f0 +#define SMSC_DATA_REG 0x3f1 + +#define SMSC_CONFIG_DEVNUM 0x7 +#define SMSC_CONFIG_ACTIVATE 0x30 +#define SMSC_CONFIG_ENTER 0x55 +#define SMSC_CONFIG_EXIT 0xaa + +#define SMSC_CONFIG_DEVNUM_FLOPPY 0 + +#define SMSC_CONFIG_ACTIVATE_ENABLE 1 + +#define SMSC_WRITE(x, a) outb(x, a) + +#define MALTA_JMPRS_REG 0x1f000210 + +#endif /* __ASM_MIPS_BOARDS_MALTA_H */ diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h new file mode 100644 index 000000000000..cea872fc6f5c --- /dev/null +++ b/arch/mips/include/asm/mips-boards/maltaint.h @@ -0,0 +1,110 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Defines for the Malta interrupt controller. + * + */ +#ifndef _MIPS_MALTAINT_H +#define _MIPS_MALTAINT_H + +#include + +/* + * Interrupts 0..15 are used for Malta ISA compatible interrupts + */ +#define MALTA_INT_BASE 0 + +/* CPU interrupt offsets */ +#define MIPSCPU_INT_SW0 0 +#define MIPSCPU_INT_SW1 1 +#define MIPSCPU_INT_MB0 2 +#define MIPSCPU_INT_I8259A MIPSCPU_INT_MB0 +#define MIPSCPU_INT_MB1 3 +#define MIPSCPU_INT_SMI MIPSCPU_INT_MB1 +#define MIPSCPU_INT_IPI0 MIPSCPU_INT_MB1 /* GIC IPI */ +#define MIPSCPU_INT_MB2 4 +#define MIPSCPU_INT_IPI1 MIPSCPU_INT_MB2 /* GIC IPI */ +#define MIPSCPU_INT_MB3 5 +#define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3 +#define MIPSCPU_INT_MB4 6 +#define MIPSCPU_INT_CORELO MIPSCPU_INT_MB4 + +/* + * Interrupts 64..127 are used for Soc-it Classic interrupts + */ +#define MSC01C_INT_BASE 64 + +/* SOC-it Classic interrupt offsets */ +#define MSC01C_INT_TMR 0 +#define MSC01C_INT_PCI 1 + +/* + * Interrupts 64..127 are used for Soc-it EIC interrupts + */ +#define MSC01E_INT_BASE 64 + +/* SOC-it EIC interrupt offsets */ +#define MSC01E_INT_SW0 1 +#define MSC01E_INT_SW1 2 +#define MSC01E_INT_MB0 3 +#define MSC01E_INT_I8259A MSC01E_INT_MB0 +#define MSC01E_INT_MB1 4 +#define MSC01E_INT_SMI MSC01E_INT_MB1 +#define MSC01E_INT_MB2 5 +#define MSC01E_INT_MB3 6 +#define MSC01E_INT_COREHI MSC01E_INT_MB3 +#define MSC01E_INT_MB4 7 +#define MSC01E_INT_CORELO MSC01E_INT_MB4 +#define MSC01E_INT_TMR 8 +#define MSC01E_INT_PCI 9 +#define MSC01E_INT_PERFCTR 10 +#define MSC01E_INT_CPUCTR 11 + +/* GIC's Nomenclature for Core Interrupt Pins on the Malta */ +#define GIC_CPU_INT0 0 /* Core Interrupt 2 */ +#define GIC_CPU_INT1 1 /* . */ +#define GIC_CPU_INT2 2 /* . */ +#define GIC_CPU_INT3 3 /* . */ +#define GIC_CPU_INT4 4 /* . */ +#define GIC_CPU_INT5 5 /* Core Interrupt 5 */ + +#define GIC_EXT_INTR(x) x + +/* Dummy data */ +#define X 0xdead + +/* External Interrupts used for IPI */ +#define GIC_IPI_EXT_INTR_RESCHED_VPE0 16 +#define GIC_IPI_EXT_INTR_CALLFNC_VPE0 17 +#define GIC_IPI_EXT_INTR_RESCHED_VPE1 18 +#define GIC_IPI_EXT_INTR_CALLFNC_VPE1 19 +#define GIC_IPI_EXT_INTR_RESCHED_VPE2 20 +#define GIC_IPI_EXT_INTR_CALLFNC_VPE2 21 +#define GIC_IPI_EXT_INTR_RESCHED_VPE3 22 +#define GIC_IPI_EXT_INTR_CALLFNC_VPE3 23 + +#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) + +#ifndef __ASSEMBLY__ +extern void maltaint_init(void); +#endif + +#endif /* !(_MIPS_MALTAINT_H) */ diff --git a/arch/mips/include/asm/mips-boards/msc01_pci.h b/arch/mips/include/asm/mips-boards/msc01_pci.h new file mode 100644 index 000000000000..e036b7dd6deb --- /dev/null +++ b/arch/mips/include/asm/mips-boards/msc01_pci.h @@ -0,0 +1,258 @@ +/* + * PCI Register definitions for the MIPS System Controller. + * + * Copyright (C) 2002, 2005 MIPS Technologies, Inc. All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_MIPS_BOARDS_MSC01_PCI_H +#define __ASM_MIPS_BOARDS_MSC01_PCI_H + +/* + * Register offset addresses + */ + +#define MSC01_PCI_ID_OFS 0x0000 +#define MSC01_PCI_SC2PMBASL_OFS 0x0208 +#define MSC01_PCI_SC2PMMSKL_OFS 0x0218 +#define MSC01_PCI_SC2PMMAPL_OFS 0x0228 +#define MSC01_PCI_SC2PIOBASL_OFS 0x0248 +#define MSC01_PCI_SC2PIOMSKL_OFS 0x0258 +#define MSC01_PCI_SC2PIOMAPL_OFS 0x0268 +#define MSC01_PCI_P2SCMSKL_OFS 0x0308 +#define MSC01_PCI_P2SCMAPL_OFS 0x0318 +#define MSC01_PCI_INTCFG_OFS 0x0600 +#define MSC01_PCI_INTSTAT_OFS 0x0608 +#define MSC01_PCI_CFGADDR_OFS 0x0610 +#define MSC01_PCI_CFGDATA_OFS 0x0618 +#define MSC01_PCI_IACK_OFS 0x0620 +#define MSC01_PCI_HEAD0_OFS 0x2000 /* DevID, VendorID */ +#define MSC01_PCI_HEAD1_OFS 0x2008 /* Status, Command */ +#define MSC01_PCI_HEAD2_OFS 0x2010 /* Class code, RevID */ +#define MSC01_PCI_HEAD3_OFS 0x2018 /* bist, header, latency */ +#define MSC01_PCI_HEAD4_OFS 0x2020 /* BAR 0 */ +#define MSC01_PCI_HEAD5_OFS 0x2028 /* BAR 1 */ +#define MSC01_PCI_HEAD6_OFS 0x2030 /* BAR 2 */ +#define MSC01_PCI_HEAD7_OFS 0x2038 /* BAR 3 */ +#define MSC01_PCI_HEAD8_OFS 0x2040 /* BAR 4 */ +#define MSC01_PCI_HEAD9_OFS 0x2048 /* BAR 5 */ +#define MSC01_PCI_HEAD10_OFS 0x2050 /* CardBus CIS Ptr */ +#define MSC01_PCI_HEAD11_OFS 0x2058 /* SubSystem ID, -VendorID */ +#define MSC01_PCI_HEAD12_OFS 0x2060 /* ROM BAR */ +#define MSC01_PCI_HEAD13_OFS 0x2068 /* Capabilities ptr */ +#define MSC01_PCI_HEAD14_OFS 0x2070 /* reserved */ +#define MSC01_PCI_HEAD15_OFS 0x2078 /* Maxl, ming, intpin, int */ +#define MSC01_PCI_BAR0_OFS 0x2220 +#define MSC01_PCI_CFG_OFS 0x2380 +#define MSC01_PCI_SWAP_OFS 0x2388 + + +/***************************************************************************** + * Register encodings + ****************************************************************************/ + +#define MSC01_PCI_ID_ID_SHF 16 +#define MSC01_PCI_ID_ID_MSK 0x00ff0000 +#define MSC01_PCI_ID_ID_HOSTBRIDGE 82 +#define MSC01_PCI_ID_MAR_SHF 8 +#define MSC01_PCI_ID_MAR_MSK 0x0000ff00 +#define MSC01_PCI_ID_MIR_SHF 0 +#define MSC01_PCI_ID_MIR_MSK 0x000000ff + +#define MSC01_PCI_SC2PMBASL_BAS_SHF 24 +#define MSC01_PCI_SC2PMBASL_BAS_MSK 0xff000000 + +#define MSC01_PCI_SC2PMMSKL_MSK_SHF 24 +#define MSC01_PCI_SC2PMMSKL_MSK_MSK 0xff000000 + +#define MSC01_PCI_SC2PMMAPL_MAP_SHF 24 +#define MSC01_PCI_SC2PMMAPL_MAP_MSK 0xff000000 + +#define MSC01_PCI_SC2PIOBASL_BAS_SHF 24 +#define MSC01_PCI_SC2PIOBASL_BAS_MSK 0xff000000 + +#define MSC01_PCI_SC2PIOMSKL_MSK_SHF 24 +#define MSC01_PCI_SC2PIOMSKL_MSK_MSK 0xff000000 + +#define MSC01_PCI_SC2PIOMAPL_MAP_SHF 24 +#define MSC01_PCI_SC2PIOMAPL_MAP_MSK 0xff000000 + +#define MSC01_PCI_P2SCMSKL_MSK_SHF 24 +#define MSC01_PCI_P2SCMSKL_MSK_MSK 0xff000000 + +#define MSC01_PCI_P2SCMAPL_MAP_SHF 24 +#define MSC01_PCI_P2SCMAPL_MAP_MSK 0xff000000 + +#define MSC01_PCI_INTCFG_RST_SHF 10 +#define MSC01_PCI_INTCFG_RST_MSK 0x00000400 +#define MSC01_PCI_INTCFG_RST_BIT 0x00000400 +#define MSC01_PCI_INTCFG_MWE_SHF 9 +#define MSC01_PCI_INTCFG_MWE_MSK 0x00000200 +#define MSC01_PCI_INTCFG_MWE_BIT 0x00000200 +#define MSC01_PCI_INTCFG_DTO_SHF 8 +#define MSC01_PCI_INTCFG_DTO_MSK 0x00000100 +#define MSC01_PCI_INTCFG_DTO_BIT 0x00000100 +#define MSC01_PCI_INTCFG_MA_SHF 7 +#define MSC01_PCI_INTCFG_MA_MSK 0x00000080 +#define MSC01_PCI_INTCFG_MA_BIT 0x00000080 +#define MSC01_PCI_INTCFG_TA_SHF 6 +#define MSC01_PCI_INTCFG_TA_MSK 0x00000040 +#define MSC01_PCI_INTCFG_TA_BIT 0x00000040 +#define MSC01_PCI_INTCFG_RTY_SHF 5 +#define MSC01_PCI_INTCFG_RTY_MSK 0x00000020 +#define MSC01_PCI_INTCFG_RTY_BIT 0x00000020 +#define MSC01_PCI_INTCFG_MWP_SHF 4 +#define MSC01_PCI_INTCFG_MWP_MSK 0x00000010 +#define MSC01_PCI_INTCFG_MWP_BIT 0x00000010 +#define MSC01_PCI_INTCFG_MRP_SHF 3 +#define MSC01_PCI_INTCFG_MRP_MSK 0x00000008 +#define MSC01_PCI_INTCFG_MRP_BIT 0x00000008 +#define MSC01_PCI_INTCFG_SWP_SHF 2 +#define MSC01_PCI_INTCFG_SWP_MSK 0x00000004 +#define MSC01_PCI_INTCFG_SWP_BIT 0x00000004 +#define MSC01_PCI_INTCFG_SRP_SHF 1 +#define MSC01_PCI_INTCFG_SRP_MSK 0x00000002 +#define MSC01_PCI_INTCFG_SRP_BIT 0x00000002 +#define MSC01_PCI_INTCFG_SE_SHF 0 +#define MSC01_PCI_INTCFG_SE_MSK 0x00000001 +#define MSC01_PCI_INTCFG_SE_BIT 0x00000001 + +#define MSC01_PCI_INTSTAT_RST_SHF 10 +#define MSC01_PCI_INTSTAT_RST_MSK 0x00000400 +#define MSC01_PCI_INTSTAT_RST_BIT 0x00000400 +#define MSC01_PCI_INTSTAT_MWE_SHF 9 +#define MSC01_PCI_INTSTAT_MWE_MSK 0x00000200 +#define MSC01_PCI_INTSTAT_MWE_BIT 0x00000200 +#define MSC01_PCI_INTSTAT_DTO_SHF 8 +#define MSC01_PCI_INTSTAT_DTO_MSK 0x00000100 +#define MSC01_PCI_INTSTAT_DTO_BIT 0x00000100 +#define MSC01_PCI_INTSTAT_MA_SHF 7 +#define MSC01_PCI_INTSTAT_MA_MSK 0x00000080 +#define MSC01_PCI_INTSTAT_MA_BIT 0x00000080 +#define MSC01_PCI_INTSTAT_TA_SHF 6 +#define MSC01_PCI_INTSTAT_TA_MSK 0x00000040 +#define MSC01_PCI_INTSTAT_TA_BIT 0x00000040 +#define MSC01_PCI_INTSTAT_RTY_SHF 5 +#define MSC01_PCI_INTSTAT_RTY_MSK 0x00000020 +#define MSC01_PCI_INTSTAT_RTY_BIT 0x00000020 +#define MSC01_PCI_INTSTAT_MWP_SHF 4 +#define MSC01_PCI_INTSTAT_MWP_MSK 0x00000010 +#define MSC01_PCI_INTSTAT_MWP_BIT 0x00000010 +#define MSC01_PCI_INTSTAT_MRP_SHF 3 +#define MSC01_PCI_INTSTAT_MRP_MSK 0x00000008 +#define MSC01_PCI_INTSTAT_MRP_BIT 0x00000008 +#define MSC01_PCI_INTSTAT_SWP_SHF 2 +#define MSC01_PCI_INTSTAT_SWP_MSK 0x00000004 +#define MSC01_PCI_INTSTAT_SWP_BIT 0x00000004 +#define MSC01_PCI_INTSTAT_SRP_SHF 1 +#define MSC01_PCI_INTSTAT_SRP_MSK 0x00000002 +#define MSC01_PCI_INTSTAT_SRP_BIT 0x00000002 +#define MSC01_PCI_INTSTAT_SE_SHF 0 +#define MSC01_PCI_INTSTAT_SE_MSK 0x00000001 +#define MSC01_PCI_INTSTAT_SE_BIT 0x00000001 + +#define MSC01_PCI_CFGADDR_BNUM_SHF 16 +#define MSC01_PCI_CFGADDR_BNUM_MSK 0x00ff0000 +#define MSC01_PCI_CFGADDR_DNUM_SHF 11 +#define MSC01_PCI_CFGADDR_DNUM_MSK 0x0000f800 +#define MSC01_PCI_CFGADDR_FNUM_SHF 8 +#define MSC01_PCI_CFGADDR_FNUM_MSK 0x00000700 +#define MSC01_PCI_CFGADDR_RNUM_SHF 2 +#define MSC01_PCI_CFGADDR_RNUM_MSK 0x000000fc + +#define MSC01_PCI_CFGDATA_DATA_SHF 0 +#define MSC01_PCI_CFGDATA_DATA_MSK 0xffffffff + +/* The defines below are ONLY valid for a MEM bar! */ +#define MSC01_PCI_BAR0_SIZE_SHF 4 +#define MSC01_PCI_BAR0_SIZE_MSK 0xfffffff0 +#define MSC01_PCI_BAR0_P_SHF 3 +#define MSC01_PCI_BAR0_P_MSK 0x00000008 +#define MSC01_PCI_BAR0_P_BIT MSC01_PCI_BAR0_P_MSK +#define MSC01_PCI_BAR0_D_SHF 1 +#define MSC01_PCI_BAR0_D_MSK 0x00000006 +#define MSC01_PCI_BAR0_T_SHF 0 +#define MSC01_PCI_BAR0_T_MSK 0x00000001 +#define MSC01_PCI_BAR0_T_BIT MSC01_PCI_BAR0_T_MSK + + +#define MSC01_PCI_CFG_RA_SHF 17 +#define MSC01_PCI_CFG_RA_MSK 0x00020000 +#define MSC01_PCI_CFG_RA_BIT MSC01_PCI_CFG_RA_MSK +#define MSC01_PCI_CFG_G_SHF 16 +#define MSC01_PCI_CFG_G_MSK 0x00010000 +#define MSC01_PCI_CFG_G_BIT MSC01_PCI_CFG_G_MSK +#define MSC01_PCI_CFG_EN_SHF 15 +#define MSC01_PCI_CFG_EN_MSK 0x00008000 +#define MSC01_PCI_CFG_EN_BIT MSC01_PCI_CFG_EN_MSK +#define MSC01_PCI_CFG_MAXRTRY_SHF 0 +#define MSC01_PCI_CFG_MAXRTRY_MSK 0x00000fff + +#define MSC01_PCI_SWAP_IO_SHF 18 +#define MSC01_PCI_SWAP_IO_MSK 0x000c0000 +#define MSC01_PCI_SWAP_MEM_SHF 16 +#define MSC01_PCI_SWAP_MEM_MSK 0x00030000 +#define MSC01_PCI_SWAP_BAR0_SHF 0 +#define MSC01_PCI_SWAP_BAR0_MSK 0x00000003 +#define MSC01_PCI_SWAP_NOSWAP 0 +#define MSC01_PCI_SWAP_BYTESWAP 1 + +/* + * MIPS System controller PCI register base. + * + * FIXME - are these macros specific to Malta and co or to the MSC? If the + * latter, they should be moved elsewhere. + */ +#define MIPS_MSC01_PCI_REG_BASE 0x1bd00000 +#define MIPS_SOCITSC_PCI_REG_BASE 0x1ff10000 + +extern unsigned long _pcictrl_msc; + +#define MSC01_PCI_REG_BASE _pcictrl_msc + +#define MSC_WRITE(reg, data) do { *(volatile u32 *)(reg) = data; } while (0) +#define MSC_READ(reg, data) do { data = *(volatile u32 *)(reg); } while (0) + +/* + * Registers absolute addresses + */ + +#define MSC01_PCI_ID (MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS) +#define MSC01_PCI_SC2PMBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS) +#define MSC01_PCI_SC2PMMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS) +#define MSC01_PCI_SC2PMMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS) +#define MSC01_PCI_SC2PIOBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS) +#define MSC01_PCI_SC2PIOMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS) +#define MSC01_PCI_SC2PIOMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS) +#define MSC01_PCI_P2SCMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS) +#define MSC01_PCI_P2SCMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS) +#define MSC01_PCI_INTCFG (MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS) +#define MSC01_PCI_INTSTAT (MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS) +#define MSC01_PCI_CFGADDR (MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS) +#define MSC01_PCI_CFGDATA (MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS) +#define MSC01_PCI_IACK (MSC01_PCI_REG_BASE + MSC01_PCI_IACK_OFS) +#define MSC01_PCI_HEAD0 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD0_OFS) +#define MSC01_PCI_HEAD1 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD1_OFS) +#define MSC01_PCI_HEAD2 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD2_OFS) +#define MSC01_PCI_HEAD3 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD3_OFS) +#define MSC01_PCI_HEAD4 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD4_OFS) +#define MSC01_PCI_HEAD5 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD5_OFS) +#define MSC01_PCI_HEAD6 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD6_OFS) +#define MSC01_PCI_HEAD7 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD7_OFS) +#define MSC01_PCI_HEAD8 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD8_OFS) +#define MSC01_PCI_HEAD9 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD9_OFS) +#define MSC01_PCI_HEAD10 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD10_OFS) +#define MSC01_PCI_HEAD11 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) +#define MSC01_PCI_HEAD12 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) +#define MSC01_PCI_HEAD13 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) +#define MSC01_PCI_HEAD14 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) +#define MSC01_PCI_HEAD15 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) +#define MSC01_PCI_BAR0 (MSC01_PCI_REG_BASE + MSC01_PCI_BAR0_OFS) +#define MSC01_PCI_CFG (MSC01_PCI_REG_BASE + MSC01_PCI_CFG_OFS) +#define MSC01_PCI_SWAP (MSC01_PCI_REG_BASE + MSC01_PCI_SWAP_OFS) + +#endif /* __ASM_MIPS_BOARDS_MSC01_PCI_H */ diff --git a/arch/mips/include/asm/mips-boards/piix4.h b/arch/mips/include/asm/mips-boards/piix4.h new file mode 100644 index 000000000000..2971d60f2e95 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/piix4.h @@ -0,0 +1,80 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Register definitions for Intel PIIX4 South Bridge Device. + */ +#ifndef __ASM_MIPS_BOARDS_PIIX4_H +#define __ASM_MIPS_BOARDS_PIIX4_H + +/************************************************************************ + * IO register offsets + ************************************************************************/ +#define PIIX4_ICTLR1_ICW1 0x20 +#define PIIX4_ICTLR1_ICW2 0x21 +#define PIIX4_ICTLR1_ICW3 0x21 +#define PIIX4_ICTLR1_ICW4 0x21 +#define PIIX4_ICTLR2_ICW1 0xa0 +#define PIIX4_ICTLR2_ICW2 0xa1 +#define PIIX4_ICTLR2_ICW3 0xa1 +#define PIIX4_ICTLR2_ICW4 0xa1 +#define PIIX4_ICTLR1_OCW1 0x21 +#define PIIX4_ICTLR1_OCW2 0x20 +#define PIIX4_ICTLR1_OCW3 0x20 +#define PIIX4_ICTLR1_OCW4 0x20 +#define PIIX4_ICTLR2_OCW1 0xa1 +#define PIIX4_ICTLR2_OCW2 0xa0 +#define PIIX4_ICTLR2_OCW3 0xa0 +#define PIIX4_ICTLR2_OCW4 0xa0 + + +/************************************************************************ + * Register encodings. + ************************************************************************/ +#define PIIX4_OCW2_NSEOI (0x1 << 5) +#define PIIX4_OCW2_SEOI (0x3 << 5) +#define PIIX4_OCW2_RNSEOI (0x5 << 5) +#define PIIX4_OCW2_RAEOIS (0x4 << 5) +#define PIIX4_OCW2_RAEOIC (0x0 << 5) +#define PIIX4_OCW2_RSEOI (0x7 << 5) +#define PIIX4_OCW2_SP (0x6 << 5) +#define PIIX4_OCW2_NOP (0x2 << 5) + +#define PIIX4_OCW2_SEL (0x0 << 3) + +#define PIIX4_OCW2_ILS_0 0 +#define PIIX4_OCW2_ILS_1 1 +#define PIIX4_OCW2_ILS_2 2 +#define PIIX4_OCW2_ILS_3 3 +#define PIIX4_OCW2_ILS_4 4 +#define PIIX4_OCW2_ILS_5 5 +#define PIIX4_OCW2_ILS_6 6 +#define PIIX4_OCW2_ILS_7 7 +#define PIIX4_OCW2_ILS_8 0 +#define PIIX4_OCW2_ILS_9 1 +#define PIIX4_OCW2_ILS_10 2 +#define PIIX4_OCW2_ILS_11 3 +#define PIIX4_OCW2_ILS_12 4 +#define PIIX4_OCW2_ILS_13 5 +#define PIIX4_OCW2_ILS_14 6 +#define PIIX4_OCW2_ILS_15 7 + +#define PIIX4_OCW3_SEL (0x1 << 3) + +#define PIIX4_OCW3_IRR 0x2 +#define PIIX4_OCW3_ISR 0x3 + +#endif /* __ASM_MIPS_BOARDS_PIIX4_H */ diff --git a/arch/mips/include/asm/mips-boards/prom.h b/arch/mips/include/asm/mips-boards/prom.h new file mode 100644 index 000000000000..a9db576a9768 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/prom.h @@ -0,0 +1,47 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * MIPS boards bootprom interface for the Linux kernel. + * + */ + +#ifndef _MIPS_PROM_H +#define _MIPS_PROM_H + +extern char *prom_getcmdline(void); +extern char *prom_getenv(char *name); +extern void prom_init_cmdline(void); +extern void prom_meminit(void); +extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); +extern void mips_display_message(const char *str); +extern void mips_display_word(unsigned int num); +extern void mips_scroll_message(void); +extern int get_ethernet_addr(char *ethernet_addr); + +/* Memory descriptor management. */ +#define PROM_MAX_PMEMBLOCKS 32 +struct prom_pmemblock { + unsigned long base; /* Within KSEG0. */ + unsigned int size; /* In bytes. */ + unsigned int type; /* free or prom memory */ +}; + +#endif /* !(_MIPS_PROM_H) */ diff --git a/arch/mips/include/asm/mips-boards/sim.h b/arch/mips/include/asm/mips-boards/sim.h new file mode 100644 index 000000000000..acb7c2331d98 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/sim.h @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ + +#ifndef _ASM_MIPS_BOARDS_SIM_H +#define _ASM_MIPS_BOARDS_SIM_H + +#define STATS_ON 1 +#define STATS_OFF 2 +#define STATS_CLEAR 3 +#define STATS_DUMP 4 +#define TRACE_ON 5 +#define TRACE_OFF 6 + + +#define simcfg(code) \ +({ \ + __asm__ __volatile__( \ + "sltiu $0,$0, %0" \ + ::"i"(code) \ + ); \ +}) + + + +#endif diff --git a/arch/mips/include/asm/mips-boards/simint.h b/arch/mips/include/asm/mips-boards/simint.h new file mode 100644 index 000000000000..8ef6db76d5c1 --- /dev/null +++ b/arch/mips/include/asm/mips-boards/simint.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#ifndef _MIPS_SIMINT_H +#define _MIPS_SIMINT_H + +#include + +#define SIM_INT_BASE 0 +#define MIPSCPU_INT_MB0 2 +#define MIPS_CPU_TIMER_IRQ 7 + + +#define MSC01E_INT_BASE 64 + +#define MSC01E_INT_CPUCTR 11 + +#endif diff --git a/arch/mips/include/asm/mips_mt.h b/arch/mips/include/asm/mips_mt.h new file mode 100644 index 000000000000..ac7935203f89 --- /dev/null +++ b/arch/mips/include/asm/mips_mt.h @@ -0,0 +1,26 @@ +/* + * Definitions and decalrations for MIPS MT support + * that are common between SMTC, VSMP, and/or AP/SP + * kernel models. + */ +#ifndef __ASM_MIPS_MT_H +#define __ASM_MIPS_MT_H + +#include + +/* + * How many VPEs and TCs is Linux allowed to use? 0 means no limit. + */ +extern int tclimit; +extern int vpelimit; + +extern cpumask_t mt_fpu_cpumask; +extern unsigned long mt_fpemul_threshold; + +extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value); +extern void mips_mt_set_cpuoptions(void); + +struct class; +extern struct class *mt_class; + +#endif /* __ASM_MIPS_MT_H */ diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h new file mode 100644 index 000000000000..c9420aa97e32 --- /dev/null +++ b/arch/mips/include/asm/mipsmtregs.h @@ -0,0 +1,395 @@ +/* + * MT regs definitions, follows on from mipsregs.h + * Copyright (C) 2004 - 2005 MIPS Technologies, Inc. All rights reserved. + * Elizabeth Clarke et. al. + * + */ +#ifndef _ASM_MIPSMTREGS_H +#define _ASM_MIPSMTREGS_H + +#include +#include + +#ifndef __ASSEMBLY__ + +/* + * C macros + */ + +#define read_c0_mvpcontrol() __read_32bit_c0_register($0, 1) +#define write_c0_mvpcontrol(val) __write_32bit_c0_register($0, 1, val) + +#define read_c0_mvpconf0() __read_32bit_c0_register($0, 2) +#define read_c0_mvpconf1() __read_32bit_c0_register($0, 3) + +#define read_c0_vpecontrol() __read_32bit_c0_register($1, 1) +#define write_c0_vpecontrol(val) __write_32bit_c0_register($1, 1, val) + +#define read_c0_vpeconf0() __read_32bit_c0_register($1, 2) +#define write_c0_vpeconf0(val) __write_32bit_c0_register($1, 2, val) + +#define read_c0_tcstatus() __read_32bit_c0_register($2, 1) +#define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val) + +#define read_c0_tcbind() __read_32bit_c0_register($2, 2) + +#define read_c0_tccontext() __read_32bit_c0_register($2, 5) +#define write_c0_tccontext(val) __write_32bit_c0_register($2, 5, val) + +#else /* Assembly */ +/* + * Macros for use in assembly language code + */ + +#define CP0_MVPCONTROL $0, 1 +#define CP0_MVPCONF0 $0, 2 +#define CP0_MVPCONF1 $0, 3 +#define CP0_VPECONTROL $1, 1 +#define CP0_VPECONF0 $1, 2 +#define CP0_VPECONF1 $1, 3 +#define CP0_YQMASK $1, 4 +#define CP0_VPESCHEDULE $1, 5 +#define CP0_VPESCHEFBK $1, 6 +#define CP0_TCSTATUS $2, 1 +#define CP0_TCBIND $2, 2 +#define CP0_TCRESTART $2, 3 +#define CP0_TCHALT $2, 4 +#define CP0_TCCONTEXT $2, 5 +#define CP0_TCSCHEDULE $2, 6 +#define CP0_TCSCHEFBK $2, 7 +#define CP0_SRSCONF0 $6, 1 +#define CP0_SRSCONF1 $6, 2 +#define CP0_SRSCONF2 $6, 3 +#define CP0_SRSCONF3 $6, 4 +#define CP0_SRSCONF4 $6, 5 + +#endif + +/* MVPControl fields */ +#define MVPCONTROL_EVP (_ULCAST_(1)) + +#define MVPCONTROL_VPC_SHIFT 1 +#define MVPCONTROL_VPC (_ULCAST_(1) << MVPCONTROL_VPC_SHIFT) + +#define MVPCONTROL_STLB_SHIFT 2 +#define MVPCONTROL_STLB (_ULCAST_(1) << MVPCONTROL_STLB_SHIFT) + + +/* MVPConf0 fields */ +#define MVPCONF0_PTC_SHIFT 0 +#define MVPCONF0_PTC ( _ULCAST_(0xff)) +#define MVPCONF0_PVPE_SHIFT 10 +#define MVPCONF0_PVPE ( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT) +#define MVPCONF0_TCA_SHIFT 15 +#define MVPCONF0_TCA ( _ULCAST_(1) << MVPCONF0_TCA_SHIFT) +#define MVPCONF0_PTLBE_SHIFT 16 +#define MVPCONF0_PTLBE (_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT) +#define MVPCONF0_TLBS_SHIFT 29 +#define MVPCONF0_TLBS (_ULCAST_(1) << MVPCONF0_TLBS_SHIFT) +#define MVPCONF0_M_SHIFT 31 +#define MVPCONF0_M (_ULCAST_(0x1) << MVPCONF0_M_SHIFT) + + +/* config3 fields */ +#define CONFIG3_MT_SHIFT 2 +#define CONFIG3_MT (_ULCAST_(1) << CONFIG3_MT_SHIFT) + + +/* VPEControl fields (per VPE) */ +#define VPECONTROL_TARGTC (_ULCAST_(0xff)) + +#define VPECONTROL_TE_SHIFT 15 +#define VPECONTROL_TE (_ULCAST_(1) << VPECONTROL_TE_SHIFT) +#define VPECONTROL_EXCPT_SHIFT 16 +#define VPECONTROL_EXCPT (_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT) + +/* Thread Exception Codes for EXCPT field */ +#define THREX_TU 0 +#define THREX_TO 1 +#define THREX_IYQ 2 +#define THREX_GSX 3 +#define THREX_YSCH 4 +#define THREX_GSSCH 5 + +#define VPECONTROL_GSI_SHIFT 20 +#define VPECONTROL_GSI (_ULCAST_(1) << VPECONTROL_GSI_SHIFT) +#define VPECONTROL_YSI_SHIFT 21 +#define VPECONTROL_YSI (_ULCAST_(1) << VPECONTROL_YSI_SHIFT) + +/* VPEConf0 fields (per VPE) */ +#define VPECONF0_VPA_SHIFT 0 +#define VPECONF0_VPA (_ULCAST_(1) << VPECONF0_VPA_SHIFT) +#define VPECONF0_MVP_SHIFT 1 +#define VPECONF0_MVP (_ULCAST_(1) << VPECONF0_MVP_SHIFT) +#define VPECONF0_XTC_SHIFT 21 +#define VPECONF0_XTC (_ULCAST_(0xff) << VPECONF0_XTC_SHIFT) + +/* TCStatus fields (per TC) */ +#define TCSTATUS_TASID (_ULCAST_(0xff)) +#define TCSTATUS_IXMT_SHIFT 10 +#define TCSTATUS_IXMT (_ULCAST_(1) << TCSTATUS_IXMT_SHIFT) +#define TCSTATUS_TKSU_SHIFT 11 +#define TCSTATUS_TKSU (_ULCAST_(3) << TCSTATUS_TKSU_SHIFT) +#define TCSTATUS_A_SHIFT 13 +#define TCSTATUS_A (_ULCAST_(1) << TCSTATUS_A_SHIFT) +#define TCSTATUS_DA_SHIFT 15 +#define TCSTATUS_DA (_ULCAST_(1) << TCSTATUS_DA_SHIFT) +#define TCSTATUS_DT_SHIFT 20 +#define TCSTATUS_DT (_ULCAST_(1) << TCSTATUS_DT_SHIFT) +#define TCSTATUS_TDS_SHIFT 21 +#define TCSTATUS_TDS (_ULCAST_(1) << TCSTATUS_TDS_SHIFT) +#define TCSTATUS_TSST_SHIFT 22 +#define TCSTATUS_TSST (_ULCAST_(1) << TCSTATUS_TSST_SHIFT) +#define TCSTATUS_RNST_SHIFT 23 +#define TCSTATUS_RNST (_ULCAST_(3) << TCSTATUS_RNST_SHIFT) +/* Codes for RNST */ +#define TC_RUNNING 0 +#define TC_WAITING 1 +#define TC_YIELDING 2 +#define TC_GATED 3 + +#define TCSTATUS_TMX_SHIFT 27 +#define TCSTATUS_TMX (_ULCAST_(1) << TCSTATUS_TMX_SHIFT) +/* TCStatus TCU bits can use same definitions/offsets as CU bits in Status */ + +/* TCBind */ +#define TCBIND_CURVPE_SHIFT 0 +#define TCBIND_CURVPE (_ULCAST_(0xf)) + +#define TCBIND_CURTC_SHIFT 21 + +#define TCBIND_CURTC (_ULCAST_(0xff) << TCBIND_CURTC_SHIFT) + +/* TCHalt */ +#define TCHALT_H (_ULCAST_(1)) + +#ifndef __ASSEMBLY__ + +static inline unsigned int dvpe(void) +{ + int res = 0; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41610001 # dvpe $1 \n" + " move %0, $1 \n" + " ehb \n" + " .set pop \n" + : "=r" (res)); + + instruction_hazard(); + + return res; +} + +static inline void __raw_evpe(void) +{ + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41600021 # evpe \n" + " ehb \n" + " .set pop \n"); +} + +/* Enable virtual processor execution if previous suggested it should be. + EVPE_ENABLE to force */ + +#define EVPE_ENABLE MVPCONTROL_EVP + +static inline void evpe(int previous) +{ + if ((previous & MVPCONTROL_EVP)) + __raw_evpe(); +} + +static inline unsigned int dmt(void) +{ + int res; + + __asm__ __volatile__( + " .set push \n" + " .set mips32r2 \n" + " .set noat \n" + " .word 0x41610BC1 # dmt $1 \n" + " ehb \n" + " move %0, $1 \n" + " .set pop \n" + : "=r" (res)); + + instruction_hazard(); + + return res; +} + +static inline void __raw_emt(void) +{ + __asm__ __volatile__( + " .set noreorder \n" + " .set mips32r2 \n" + " .word 0x41600be1 # emt \n" + " ehb \n" + " .set mips0 \n" + " .set reorder"); +} + +/* enable multi-threaded execution if previous suggested it should be. + EMT_ENABLE to force */ + +#define EMT_ENABLE VPECONTROL_TE + +static inline void emt(int previous) +{ + if ((previous & EMT_ENABLE)) + __raw_emt(); +} + +static inline void ehb(void) +{ + __asm__ __volatile__( + " .set mips32r2 \n" + " ehb \n" + " .set mips0 \n"); +} + +#define mftc0(rt,sel) \ +({ \ + unsigned long __res; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set mips32r2 \n" \ + " .set noat \n" \ + " # mftc0 $1, $" #rt ", " #sel " \n" \ + " .word 0x41000800 | (" #rt " << 16) | " #sel " \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__res)); \ + \ + __res; \ +}) + +#define mftgpr(rt) \ +({ \ + unsigned long __res; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips32r2 \n" \ + " # mftgpr $1," #rt " \n" \ + " .word 0x41000820 | (" #rt " << 16) \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__res)); \ + \ + __res; \ +}) + +#define mftr(rt, u, sel) \ +({ \ + unsigned long __res; \ + \ + __asm__ __volatile__( \ + " mftr %0, " #rt ", " #u ", " #sel " \n" \ + : "=r" (__res)); \ + \ + __res; \ +}) + +#define mttgpr(rd,v) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set mips32r2 \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mttgpr $1, " #rd " \n" \ + " .word 0x41810020 | (" #rd " << 11) \n" \ + " .set pop \n" \ + : : "r" (v)); \ +} while (0) + +#define mttc0(rd, sel, v) \ +({ \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set mips32r2 \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mttc0 %0," #rd ", " #sel " \n" \ + " .word 0x41810000 | (" #rd " << 11) | " #sel " \n" \ + " .set pop \n" \ + : \ + : "r" (v)); \ +}) + + +#define mttr(rd, u, sel, v) \ +({ \ + __asm__ __volatile__( \ + "mttr %0," #rd ", " #u ", " #sel \ + : : "r" (v)); \ +}) + + +#define settc(tc) \ +do { \ + write_c0_vpecontrol((read_c0_vpecontrol()&~VPECONTROL_TARGTC) | (tc)); \ + ehb(); \ +} while (0) + + +/* you *must* set the target tc (settc) before trying to use these */ +#define read_vpe_c0_vpecontrol() mftc0(1, 1) +#define write_vpe_c0_vpecontrol(val) mttc0(1, 1, val) +#define read_vpe_c0_vpeconf0() mftc0(1, 2) +#define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val) +#define read_vpe_c0_count() mftc0(9, 0) +#define write_vpe_c0_count(val) mttc0(9, 0, val) +#define read_vpe_c0_status() mftc0(12, 0) +#define write_vpe_c0_status(val) mttc0(12, 0, val) +#define read_vpe_c0_cause() mftc0(13, 0) +#define write_vpe_c0_cause(val) mttc0(13, 0, val) +#define read_vpe_c0_config() mftc0(16, 0) +#define write_vpe_c0_config(val) mttc0(16, 0, val) +#define read_vpe_c0_config1() mftc0(16, 1) +#define write_vpe_c0_config1(val) mttc0(16, 1, val) +#define read_vpe_c0_config7() mftc0(16, 7) +#define write_vpe_c0_config7(val) mttc0(16, 7, val) +#define read_vpe_c0_ebase() mftc0(15, 1) +#define write_vpe_c0_ebase(val) mttc0(15, 1, val) +#define write_vpe_c0_compare(val) mttc0(11, 0, val) +#define read_vpe_c0_badvaddr() mftc0(8, 0) +#define read_vpe_c0_epc() mftc0(14, 0) +#define write_vpe_c0_epc(val) mttc0(14, 0, val) + + +/* TC */ +#define read_tc_c0_tcstatus() mftc0(2, 1) +#define write_tc_c0_tcstatus(val) mttc0(2, 1, val) +#define read_tc_c0_tcbind() mftc0(2, 2) +#define write_tc_c0_tcbind(val) mttc0(2, 2, val) +#define read_tc_c0_tcrestart() mftc0(2, 3) +#define write_tc_c0_tcrestart(val) mttc0(2, 3, val) +#define read_tc_c0_tchalt() mftc0(2, 4) +#define write_tc_c0_tchalt(val) mttc0(2, 4, val) +#define read_tc_c0_tccontext() mftc0(2, 5) +#define write_tc_c0_tccontext(val) mttc0(2, 5, val) + +/* GPR */ +#define read_tc_gpr_sp() mftgpr(29) +#define write_tc_gpr_sp(val) mttgpr(29, val) +#define read_tc_gpr_gp() mftgpr(28) +#define write_tc_gpr_gp(val) mttgpr(28, val) + +__BUILD_SET_C0(mvpcontrol) + +#endif /* Not __ASSEMBLY__ */ + +#endif diff --git a/arch/mips/include/asm/mipsprom.h b/arch/mips/include/asm/mipsprom.h new file mode 100644 index 000000000000..146d41b67adc --- /dev/null +++ b/arch/mips/include/asm/mipsprom.h @@ -0,0 +1,76 @@ +#ifndef __ASM_MIPS_PROM_H +#define __ASM_MIPS_PROM_H + +#define PROM_RESET 0 +#define PROM_EXEC 1 +#define PROM_RESTART 2 +#define PROM_REINIT 3 +#define PROM_REBOOT 4 +#define PROM_AUTOBOOT 5 +#define PROM_OPEN 6 +#define PROM_READ 7 +#define PROM_WRITE 8 +#define PROM_IOCTL 9 +#define PROM_CLOSE 10 +#define PROM_GETCHAR 11 +#define PROM_PUTCHAR 12 +#define PROM_SHOWCHAR 13 /* XXX */ +#define PROM_GETS 14 /* XXX */ +#define PROM_PUTS 15 /* XXX */ +#define PROM_PRINTF 16 /* XXX */ + +/* What are these for? */ +#define PROM_INITPROTO 17 /* XXX */ +#define PROM_PROTOENABLE 18 /* XXX */ +#define PROM_PROTODISABLE 19 /* XXX */ +#define PROM_GETPKT 20 /* XXX */ +#define PROM_PUTPKT 21 /* XXX */ + +/* More PROM shit. Probably has to do with VME RMW cycles??? */ +#define PROM_ORW_RMW 22 /* XXX */ +#define PROM_ORH_RMW 23 /* XXX */ +#define PROM_ORB_RMW 24 /* XXX */ +#define PROM_ANDW_RMW 25 /* XXX */ +#define PROM_ANDH_RMW 26 /* XXX */ +#define PROM_ANDB_RMW 27 /* XXX */ + +/* Cache handling stuff */ +#define PROM_FLUSHCACHE 28 /* XXX */ +#define PROM_CLEARCACHE 29 /* XXX */ + +/* Libc alike stuff */ +#define PROM_SETJMP 30 /* XXX */ +#define PROM_LONGJMP 31 /* XXX */ +#define PROM_BEVUTLB 32 /* XXX */ +#define PROM_GETENV 33 /* XXX */ +#define PROM_SETENV 34 /* XXX */ +#define PROM_ATOB 35 /* XXX */ +#define PROM_STRCMP 36 /* XXX */ +#define PROM_STRLEN 37 /* XXX */ +#define PROM_STRCPY 38 /* XXX */ +#define PROM_STRCAT 39 /* XXX */ + +/* Misc stuff */ +#define PROM_PARSER 40 /* XXX */ +#define PROM_RANGE 41 /* XXX */ +#define PROM_ARGVIZE 42 /* XXX */ +#define PROM_HELP 43 /* XXX */ + +/* Entry points for some PROM commands */ +#define PROM_DUMPCMD 44 /* XXX */ +#define PROM_SETENVCMD 45 /* XXX */ +#define PROM_UNSETENVCMD 46 /* XXX */ +#define PROM_PRINTENVCMD 47 /* XXX */ +#define PROM_BEVEXCEPT 48 /* XXX */ +#define PROM_ENABLECMD 49 /* XXX */ +#define PROM_DISABLECMD 50 /* XXX */ + +#define PROM_CLEARNOFAULT 51 /* XXX */ +#define PROM_NOTIMPLEMENT 52 /* XXX */ + +#define PROM_NV_GET 53 /* XXX */ +#define PROM_NV_SET 54 /* XXX */ + +extern char *prom_getenv(char *); + +#endif /* __ASM_MIPS_PROM_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h new file mode 100644 index 000000000000..979866000da4 --- /dev/null +++ b/arch/mips/include/asm/mipsregs.h @@ -0,0 +1,1526 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle + * Copyright (C) 2000 Silicon Graphics, Inc. + * Modified for further R[236]000 support by Paul M. Antoine, 1996. + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000, 07 MIPS Technologies, Inc. + * Copyright (C) 2003, 2004 Maciej W. Rozycki + */ +#ifndef _ASM_MIPSREGS_H +#define _ASM_MIPSREGS_H + +#include +#include +#include + +/* + * The following macros are especially useful for __asm__ + * inline assembler. + */ +#ifndef __STR +#define __STR(x) #x +#endif +#ifndef STR +#define STR(x) __STR(x) +#endif + +/* + * Configure language + */ +#ifdef __ASSEMBLY__ +#define _ULCAST_ +#else +#define _ULCAST_ (unsigned long) +#endif + +/* + * Coprocessor 0 register names + */ +#define CP0_INDEX $0 +#define CP0_RANDOM $1 +#define CP0_ENTRYLO0 $2 +#define CP0_ENTRYLO1 $3 +#define CP0_CONF $3 +#define CP0_CONTEXT $4 +#define CP0_PAGEMASK $5 +#define CP0_WIRED $6 +#define CP0_INFO $7 +#define CP0_BADVADDR $8 +#define CP0_COUNT $9 +#define CP0_ENTRYHI $10 +#define CP0_COMPARE $11 +#define CP0_STATUS $12 +#define CP0_CAUSE $13 +#define CP0_EPC $14 +#define CP0_PRID $15 +#define CP0_CONFIG $16 +#define CP0_LLADDR $17 +#define CP0_WATCHLO $18 +#define CP0_WATCHHI $19 +#define CP0_XCONTEXT $20 +#define CP0_FRAMEMASK $21 +#define CP0_DIAGNOSTIC $22 +#define CP0_DEBUG $23 +#define CP0_DEPC $24 +#define CP0_PERFORMANCE $25 +#define CP0_ECC $26 +#define CP0_CACHEERR $27 +#define CP0_TAGLO $28 +#define CP0_TAGHI $29 +#define CP0_ERROREPC $30 +#define CP0_DESAVE $31 + +/* + * R4640/R4650 cp0 register names. These registers are listed + * here only for completeness; without MMU these CPUs are not useable + * by Linux. A future ELKS port might take make Linux run on them + * though ... + */ +#define CP0_IBASE $0 +#define CP0_IBOUND $1 +#define CP0_DBASE $2 +#define CP0_DBOUND $3 +#define CP0_CALG $17 +#define CP0_IWATCH $18 +#define CP0_DWATCH $19 + +/* + * Coprocessor 0 Set 1 register names + */ +#define CP0_S1_DERRADDR0 $26 +#define CP0_S1_DERRADDR1 $27 +#define CP0_S1_INTCONTROL $20 + +/* + * Coprocessor 0 Set 2 register names + */ +#define CP0_S2_SRSCTL $12 /* MIPSR2 */ + +/* + * Coprocessor 0 Set 3 register names + */ +#define CP0_S3_SRSMAP $12 /* MIPSR2 */ + +/* + * TX39 Series + */ +#define CP0_TX39_CACHE $7 + +/* + * Coprocessor 1 (FPU) register names + */ +#define CP1_REVISION $0 +#define CP1_STATUS $31 + +/* + * FPU Status Register Values + */ +/* + * Status Register Values + */ + +#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ +#define FPU_CSR_COND 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND0 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND1 0x02000000 /* $fcc1 */ +#define FPU_CSR_COND2 0x04000000 /* $fcc2 */ +#define FPU_CSR_COND3 0x08000000 /* $fcc3 */ +#define FPU_CSR_COND4 0x10000000 /* $fcc4 */ +#define FPU_CSR_COND5 0x20000000 /* $fcc5 */ +#define FPU_CSR_COND6 0x40000000 /* $fcc6 */ +#define FPU_CSR_COND7 0x80000000 /* $fcc7 */ + +/* + * X the exception cause indicator + * E the exception enable + * S the sticky/flag bit +*/ +#define FPU_CSR_ALL_X 0x0003f000 +#define FPU_CSR_UNI_X 0x00020000 +#define FPU_CSR_INV_X 0x00010000 +#define FPU_CSR_DIV_X 0x00008000 +#define FPU_CSR_OVF_X 0x00004000 +#define FPU_CSR_UDF_X 0x00002000 +#define FPU_CSR_INE_X 0x00001000 + +#define FPU_CSR_ALL_E 0x00000f80 +#define FPU_CSR_INV_E 0x00000800 +#define FPU_CSR_DIV_E 0x00000400 +#define FPU_CSR_OVF_E 0x00000200 +#define FPU_CSR_UDF_E 0x00000100 +#define FPU_CSR_INE_E 0x00000080 + +#define FPU_CSR_ALL_S 0x0000007c +#define FPU_CSR_INV_S 0x00000040 +#define FPU_CSR_DIV_S 0x00000020 +#define FPU_CSR_OVF_S 0x00000010 +#define FPU_CSR_UDF_S 0x00000008 +#define FPU_CSR_INE_S 0x00000004 + +/* rounding mode */ +#define FPU_CSR_RN 0x0 /* nearest */ +#define FPU_CSR_RZ 0x1 /* towards zero */ +#define FPU_CSR_RU 0x2 /* towards +Infinity */ +#define FPU_CSR_RD 0x3 /* towards -Infinity */ + + +/* + * Values for PageMask register + */ +#ifdef CONFIG_CPU_VR41XX + +/* Why doesn't stupidity hurt ... */ + +#define PM_1K 0x00000000 +#define PM_4K 0x00001800 +#define PM_16K 0x00007800 +#define PM_64K 0x0001f800 +#define PM_256K 0x0007f800 + +#else + +#define PM_4K 0x00000000 +#define PM_16K 0x00006000 +#define PM_64K 0x0001e000 +#define PM_256K 0x0007e000 +#define PM_1M 0x001fe000 +#define PM_4M 0x007fe000 +#define PM_16M 0x01ffe000 +#define PM_64M 0x07ffe000 +#define PM_256M 0x1fffe000 + +#endif + +/* + * Default page size for a given kernel configuration + */ +#ifdef CONFIG_PAGE_SIZE_4KB +#define PM_DEFAULT_MASK PM_4K +#elif defined(CONFIG_PAGE_SIZE_16KB) +#define PM_DEFAULT_MASK PM_16K +#elif defined(CONFIG_PAGE_SIZE_64KB) +#define PM_DEFAULT_MASK PM_64K +#else +#error Bad page size configuration! +#endif + + +/* + * Values used for computation of new tlb entries + */ +#define PL_4K 12 +#define PL_16K 14 +#define PL_64K 16 +#define PL_256K 18 +#define PL_1M 20 +#define PL_4M 22 +#define PL_16M 24 +#define PL_64M 26 +#define PL_256M 28 + +/* + * R4x00 interrupt enable / cause bits + */ +#define IE_SW0 (_ULCAST_(1) << 8) +#define IE_SW1 (_ULCAST_(1) << 9) +#define IE_IRQ0 (_ULCAST_(1) << 10) +#define IE_IRQ1 (_ULCAST_(1) << 11) +#define IE_IRQ2 (_ULCAST_(1) << 12) +#define IE_IRQ3 (_ULCAST_(1) << 13) +#define IE_IRQ4 (_ULCAST_(1) << 14) +#define IE_IRQ5 (_ULCAST_(1) << 15) + +/* + * R4x00 interrupt cause bits + */ +#define C_SW0 (_ULCAST_(1) << 8) +#define C_SW1 (_ULCAST_(1) << 9) +#define C_IRQ0 (_ULCAST_(1) << 10) +#define C_IRQ1 (_ULCAST_(1) << 11) +#define C_IRQ2 (_ULCAST_(1) << 12) +#define C_IRQ3 (_ULCAST_(1) << 13) +#define C_IRQ4 (_ULCAST_(1) << 14) +#define C_IRQ5 (_ULCAST_(1) << 15) + +/* + * Bitfields in the R4xx0 cp0 status register + */ +#define ST0_IE 0x00000001 +#define ST0_EXL 0x00000002 +#define ST0_ERL 0x00000004 +#define ST0_KSU 0x00000018 +# define KSU_USER 0x00000010 +# define KSU_SUPERVISOR 0x00000008 +# define KSU_KERNEL 0x00000000 +#define ST0_UX 0x00000020 +#define ST0_SX 0x00000040 +#define ST0_KX 0x00000080 +#define ST0_DE 0x00010000 +#define ST0_CE 0x00020000 + +/* + * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate + * cacheops in userspace. This bit exists only on RM7000 and RM9000 + * processors. + */ +#define ST0_CO 0x08000000 + +/* + * Bitfields in the R[23]000 cp0 status register. + */ +#define ST0_IEC 0x00000001 +#define ST0_KUC 0x00000002 +#define ST0_IEP 0x00000004 +#define ST0_KUP 0x00000008 +#define ST0_IEO 0x00000010 +#define ST0_KUO 0x00000020 +/* bits 6 & 7 are reserved on R[23]000 */ +#define ST0_ISC 0x00010000 +#define ST0_SWC 0x00020000 +#define ST0_CM 0x00080000 + +/* + * Bits specific to the R4640/R4650 + */ +#define ST0_UM (_ULCAST_(1) << 4) +#define ST0_IL (_ULCAST_(1) << 23) +#define ST0_DL (_ULCAST_(1) << 24) + +/* + * Enable the MIPS MDMX and DSP ASEs + */ +#define ST0_MX 0x01000000 + +/* + * Bitfields in the TX39 family CP0 Configuration Register 3 + */ +#define TX39_CONF_ICS_SHIFT 19 +#define TX39_CONF_ICS_MASK 0x00380000 +#define TX39_CONF_ICS_1KB 0x00000000 +#define TX39_CONF_ICS_2KB 0x00080000 +#define TX39_CONF_ICS_4KB 0x00100000 +#define TX39_CONF_ICS_8KB 0x00180000 +#define TX39_CONF_ICS_16KB 0x00200000 + +#define TX39_CONF_DCS_SHIFT 16 +#define TX39_CONF_DCS_MASK 0x00070000 +#define TX39_CONF_DCS_1KB 0x00000000 +#define TX39_CONF_DCS_2KB 0x00010000 +#define TX39_CONF_DCS_4KB 0x00020000 +#define TX39_CONF_DCS_8KB 0x00030000 +#define TX39_CONF_DCS_16KB 0x00040000 + +#define TX39_CONF_CWFON 0x00004000 +#define TX39_CONF_WBON 0x00002000 +#define TX39_CONF_RF_SHIFT 10 +#define TX39_CONF_RF_MASK 0x00000c00 +#define TX39_CONF_DOZE 0x00000200 +#define TX39_CONF_HALT 0x00000100 +#define TX39_CONF_LOCK 0x00000080 +#define TX39_CONF_ICE 0x00000020 +#define TX39_CONF_DCE 0x00000010 +#define TX39_CONF_IRSIZE_SHIFT 2 +#define TX39_CONF_IRSIZE_MASK 0x0000000c +#define TX39_CONF_DRSIZE_SHIFT 0 +#define TX39_CONF_DRSIZE_MASK 0x00000003 + +/* + * Status register bits available in all MIPS CPUs. + */ +#define ST0_IM 0x0000ff00 +#define STATUSB_IP0 8 +#define STATUSF_IP0 (_ULCAST_(1) << 8) +#define STATUSB_IP1 9 +#define STATUSF_IP1 (_ULCAST_(1) << 9) +#define STATUSB_IP2 10 +#define STATUSF_IP2 (_ULCAST_(1) << 10) +#define STATUSB_IP3 11 +#define STATUSF_IP3 (_ULCAST_(1) << 11) +#define STATUSB_IP4 12 +#define STATUSF_IP4 (_ULCAST_(1) << 12) +#define STATUSB_IP5 13 +#define STATUSF_IP5 (_ULCAST_(1) << 13) +#define STATUSB_IP6 14 +#define STATUSF_IP6 (_ULCAST_(1) << 14) +#define STATUSB_IP7 15 +#define STATUSF_IP7 (_ULCAST_(1) << 15) +#define STATUSB_IP8 0 +#define STATUSF_IP8 (_ULCAST_(1) << 0) +#define STATUSB_IP9 1 +#define STATUSF_IP9 (_ULCAST_(1) << 1) +#define STATUSB_IP10 2 +#define STATUSF_IP10 (_ULCAST_(1) << 2) +#define STATUSB_IP11 3 +#define STATUSF_IP11 (_ULCAST_(1) << 3) +#define STATUSB_IP12 4 +#define STATUSF_IP12 (_ULCAST_(1) << 4) +#define STATUSB_IP13 5 +#define STATUSF_IP13 (_ULCAST_(1) << 5) +#define STATUSB_IP14 6 +#define STATUSF_IP14 (_ULCAST_(1) << 6) +#define STATUSB_IP15 7 +#define STATUSF_IP15 (_ULCAST_(1) << 7) +#define ST0_CH 0x00040000 +#define ST0_SR 0x00100000 +#define ST0_TS 0x00200000 +#define ST0_BEV 0x00400000 +#define ST0_RE 0x02000000 +#define ST0_FR 0x04000000 +#define ST0_CU 0xf0000000 +#define ST0_CU0 0x10000000 +#define ST0_CU1 0x20000000 +#define ST0_CU2 0x40000000 +#define ST0_CU3 0x80000000 +#define ST0_XX 0x80000000 /* MIPS IV naming */ + +/* + * Bitfields and bit numbers in the coprocessor 0 cause register. + * + * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. + */ +#define CAUSEB_EXCCODE 2 +#define CAUSEF_EXCCODE (_ULCAST_(31) << 2) +#define CAUSEB_IP 8 +#define CAUSEF_IP (_ULCAST_(255) << 8) +#define CAUSEB_IP0 8 +#define CAUSEF_IP0 (_ULCAST_(1) << 8) +#define CAUSEB_IP1 9 +#define CAUSEF_IP1 (_ULCAST_(1) << 9) +#define CAUSEB_IP2 10 +#define CAUSEF_IP2 (_ULCAST_(1) << 10) +#define CAUSEB_IP3 11 +#define CAUSEF_IP3 (_ULCAST_(1) << 11) +#define CAUSEB_IP4 12 +#define CAUSEF_IP4 (_ULCAST_(1) << 12) +#define CAUSEB_IP5 13 +#define CAUSEF_IP5 (_ULCAST_(1) << 13) +#define CAUSEB_IP6 14 +#define CAUSEF_IP6 (_ULCAST_(1) << 14) +#define CAUSEB_IP7 15 +#define CAUSEF_IP7 (_ULCAST_(1) << 15) +#define CAUSEB_IV 23 +#define CAUSEF_IV (_ULCAST_(1) << 23) +#define CAUSEB_CE 28 +#define CAUSEF_CE (_ULCAST_(3) << 28) +#define CAUSEB_BD 31 +#define CAUSEF_BD (_ULCAST_(1) << 31) + +/* + * Bits in the coprocessor 0 config register. + */ +/* Generic bits. */ +#define CONF_CM_CACHABLE_NO_WA 0 +#define CONF_CM_CACHABLE_WA 1 +#define CONF_CM_UNCACHED 2 +#define CONF_CM_CACHABLE_NONCOHERENT 3 +#define CONF_CM_CACHABLE_CE 4 +#define CONF_CM_CACHABLE_COW 5 +#define CONF_CM_CACHABLE_CUW 6 +#define CONF_CM_CACHABLE_ACCELERATED 7 +#define CONF_CM_CMASK 7 +#define CONF_BE (_ULCAST_(1) << 15) + +/* Bits common to various processors. */ +#define CONF_CU (_ULCAST_(1) << 3) +#define CONF_DB (_ULCAST_(1) << 4) +#define CONF_IB (_ULCAST_(1) << 5) +#define CONF_DC (_ULCAST_(7) << 6) +#define CONF_IC (_ULCAST_(7) << 9) +#define CONF_EB (_ULCAST_(1) << 13) +#define CONF_EM (_ULCAST_(1) << 14) +#define CONF_SM (_ULCAST_(1) << 16) +#define CONF_SC (_ULCAST_(1) << 17) +#define CONF_EW (_ULCAST_(3) << 18) +#define CONF_EP (_ULCAST_(15)<< 24) +#define CONF_EC (_ULCAST_(7) << 28) +#define CONF_CM (_ULCAST_(1) << 31) + +/* Bits specific to the R4xx0. */ +#define R4K_CONF_SW (_ULCAST_(1) << 20) +#define R4K_CONF_SS (_ULCAST_(1) << 21) +#define R4K_CONF_SB (_ULCAST_(3) << 22) + +/* Bits specific to the R5000. */ +#define R5K_CONF_SE (_ULCAST_(1) << 12) +#define R5K_CONF_SS (_ULCAST_(3) << 20) + +/* Bits specific to the RM7000. */ +#define RM7K_CONF_SE (_ULCAST_(1) << 3) +#define RM7K_CONF_TE (_ULCAST_(1) << 12) +#define RM7K_CONF_CLK (_ULCAST_(1) << 16) +#define RM7K_CONF_TC (_ULCAST_(1) << 17) +#define RM7K_CONF_SI (_ULCAST_(3) << 20) +#define RM7K_CONF_SC (_ULCAST_(1) << 31) + +/* Bits specific to the R10000. */ +#define R10K_CONF_DN (_ULCAST_(3) << 3) +#define R10K_CONF_CT (_ULCAST_(1) << 5) +#define R10K_CONF_PE (_ULCAST_(1) << 6) +#define R10K_CONF_PM (_ULCAST_(3) << 7) +#define R10K_CONF_EC (_ULCAST_(15)<< 9) +#define R10K_CONF_SB (_ULCAST_(1) << 13) +#define R10K_CONF_SK (_ULCAST_(1) << 14) +#define R10K_CONF_SS (_ULCAST_(7) << 16) +#define R10K_CONF_SC (_ULCAST_(7) << 19) +#define R10K_CONF_DC (_ULCAST_(7) << 26) +#define R10K_CONF_IC (_ULCAST_(7) << 29) + +/* Bits specific to the VR41xx. */ +#define VR41_CONF_CS (_ULCAST_(1) << 12) +#define VR41_CONF_P4K (_ULCAST_(1) << 13) +#define VR41_CONF_BP (_ULCAST_(1) << 16) +#define VR41_CONF_M16 (_ULCAST_(1) << 20) +#define VR41_CONF_AD (_ULCAST_(1) << 23) + +/* Bits specific to the R30xx. */ +#define R30XX_CONF_FDM (_ULCAST_(1) << 19) +#define R30XX_CONF_REV (_ULCAST_(1) << 22) +#define R30XX_CONF_AC (_ULCAST_(1) << 23) +#define R30XX_CONF_RF (_ULCAST_(1) << 24) +#define R30XX_CONF_HALT (_ULCAST_(1) << 25) +#define R30XX_CONF_FPINT (_ULCAST_(7) << 26) +#define R30XX_CONF_DBR (_ULCAST_(1) << 29) +#define R30XX_CONF_SB (_ULCAST_(1) << 30) +#define R30XX_CONF_LOCK (_ULCAST_(1) << 31) + +/* Bits specific to the TX49. */ +#define TX49_CONF_DC (_ULCAST_(1) << 16) +#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */ +#define TX49_CONF_HALT (_ULCAST_(1) << 18) +#define TX49_CONF_CWFON (_ULCAST_(1) << 27) + +/* Bits specific to the MIPS32/64 PRA. */ +#define MIPS_CONF_MT (_ULCAST_(7) << 7) +#define MIPS_CONF_AR (_ULCAST_(7) << 10) +#define MIPS_CONF_AT (_ULCAST_(3) << 13) +#define MIPS_CONF_M (_ULCAST_(1) << 31) + +/* + * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above. + */ +#define MIPS_CONF1_FP (_ULCAST_(1) << 0) +#define MIPS_CONF1_EP (_ULCAST_(1) << 1) +#define MIPS_CONF1_CA (_ULCAST_(1) << 2) +#define MIPS_CONF1_WR (_ULCAST_(1) << 3) +#define MIPS_CONF1_PC (_ULCAST_(1) << 4) +#define MIPS_CONF1_MD (_ULCAST_(1) << 5) +#define MIPS_CONF1_C2 (_ULCAST_(1) << 6) +#define MIPS_CONF1_DA (_ULCAST_(7) << 7) +#define MIPS_CONF1_DL (_ULCAST_(7) << 10) +#define MIPS_CONF1_DS (_ULCAST_(7) << 13) +#define MIPS_CONF1_IA (_ULCAST_(7) << 16) +#define MIPS_CONF1_IL (_ULCAST_(7) << 19) +#define MIPS_CONF1_IS (_ULCAST_(7) << 22) +#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25) + +#define MIPS_CONF2_SA (_ULCAST_(15)<< 0) +#define MIPS_CONF2_SL (_ULCAST_(15)<< 4) +#define MIPS_CONF2_SS (_ULCAST_(15)<< 8) +#define MIPS_CONF2_SU (_ULCAST_(15)<< 12) +#define MIPS_CONF2_TA (_ULCAST_(15)<< 16) +#define MIPS_CONF2_TL (_ULCAST_(15)<< 20) +#define MIPS_CONF2_TS (_ULCAST_(15)<< 24) +#define MIPS_CONF2_TU (_ULCAST_(7) << 28) + +#define MIPS_CONF3_TL (_ULCAST_(1) << 0) +#define MIPS_CONF3_SM (_ULCAST_(1) << 1) +#define MIPS_CONF3_MT (_ULCAST_(1) << 2) +#define MIPS_CONF3_SP (_ULCAST_(1) << 4) +#define MIPS_CONF3_VINT (_ULCAST_(1) << 5) +#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6) +#define MIPS_CONF3_LPA (_ULCAST_(1) << 7) +#define MIPS_CONF3_DSP (_ULCAST_(1) << 10) +#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13) + +#define MIPS_CONF7_WII (_ULCAST_(1) << 31) + +#define MIPS_CONF7_RPS (_ULCAST_(1) << 2) + + +/* + * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register. + */ +#define MIPS_FPIR_S (_ULCAST_(1) << 16) +#define MIPS_FPIR_D (_ULCAST_(1) << 17) +#define MIPS_FPIR_PS (_ULCAST_(1) << 18) +#define MIPS_FPIR_3D (_ULCAST_(1) << 19) +#define MIPS_FPIR_W (_ULCAST_(1) << 20) +#define MIPS_FPIR_L (_ULCAST_(1) << 21) +#define MIPS_FPIR_F64 (_ULCAST_(1) << 22) + +#ifndef __ASSEMBLY__ + +/* + * Functions to access the R10000 performance counters. These are basically + * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit + * performance counter number encoded into bits 1 ... 5 of the instruction. + * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware + * disassembler these will look like an access to sel 0 or 1. + */ +#define read_r10k_perf_cntr(counter) \ +({ \ + unsigned int __res; \ + __asm__ __volatile__( \ + "mfpc\t%0, %1" \ + : "=r" (__res) \ + : "i" (counter)); \ + \ + __res; \ +}) + +#define write_r10k_perf_cntr(counter,val) \ +do { \ + __asm__ __volatile__( \ + "mtpc\t%0, %1" \ + : \ + : "r" (val), "i" (counter)); \ +} while (0) + +#define read_r10k_perf_event(counter) \ +({ \ + unsigned int __res; \ + __asm__ __volatile__( \ + "mfps\t%0, %1" \ + : "=r" (__res) \ + : "i" (counter)); \ + \ + __res; \ +}) + +#define write_r10k_perf_cntl(counter,val) \ +do { \ + __asm__ __volatile__( \ + "mtps\t%0, %1" \ + : \ + : "r" (val), "i" (counter)); \ +} while (0) + + +/* + * Macros to access the system control coprocessor + */ + +#define __read_32bit_c0_register(source, sel) \ +({ int __res; \ + if (sel == 0) \ + __asm__ __volatile__( \ + "mfc0\t%0, " #source "\n\t" \ + : "=r" (__res)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "mfc0\t%0, " #source ", " #sel "\n\t" \ + ".set\tmips0\n\t" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __read_64bit_c0_register(source, sel) \ +({ unsigned long long __res; \ + if (sizeof(unsigned long) == 4) \ + __res = __read_64bit_c0_split(source, sel); \ + else if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips3\n\t" \ + "dmfc0\t%0, " #source "\n\t" \ + ".set\tmips0" \ + : "=r" (__res)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%0, " #source ", " #sel "\n\t" \ + ".set\tmips0" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __write_32bit_c0_register(register, sel, value) \ +do { \ + if (sel == 0) \ + __asm__ __volatile__( \ + "mtc0\t%z0, " #register "\n\t" \ + : : "Jr" ((unsigned int)(value))); \ + else \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "mtc0\t%z0, " #register ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "Jr" ((unsigned int)(value))); \ +} while (0) + +#define __write_64bit_c0_register(register, sel, value) \ +do { \ + if (sizeof(unsigned long) == 4) \ + __write_64bit_c0_split(register, sel, value); \ + else if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips3\n\t" \ + "dmtc0\t%z0, " #register "\n\t" \ + ".set\tmips0" \ + : : "Jr" (value)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmtc0\t%z0, " #register ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "Jr" (value)); \ +} while (0) + +#define __read_ulong_c0_register(reg, sel) \ + ((sizeof(unsigned long) == 4) ? \ + (unsigned long) __read_32bit_c0_register(reg, sel) : \ + (unsigned long) __read_64bit_c0_register(reg, sel)) + +#define __write_ulong_c0_register(reg, sel, val) \ +do { \ + if (sizeof(unsigned long) == 4) \ + __write_32bit_c0_register(reg, sel, val); \ + else \ + __write_64bit_c0_register(reg, sel, val); \ +} while (0) + +/* + * On RM7000/RM9000 these are uses to access cop0 set 1 registers + */ +#define __read_32bit_c0_ctrl_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + "cfc0\t%0, " #source "\n\t" \ + : "=r" (__res)); \ + __res; \ +}) + +#define __write_32bit_c0_ctrl_register(register, value) \ +do { \ + __asm__ __volatile__( \ + "ctc0\t%z0, " #register "\n\t" \ + : : "Jr" ((unsigned int)(value))); \ +} while (0) + +/* + * These versions are only needed for systems with more than 38 bits of + * physical address space running the 32-bit kernel. That's none atm :-) + */ +#define __read_64bit_c0_split(source, sel) \ +({ \ + unsigned long long __val; \ + unsigned long __flags; \ + \ + local_irq_save(__flags); \ + if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%M0, " #source "\n\t" \ + "dsll\t%L0, %M0, 32\n\t" \ + "dsrl\t%M0, %M0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + ".set\tmips0" \ + : "=r" (__val)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dmfc0\t%M0, " #source ", " #sel "\n\t" \ + "dsll\t%L0, %M0, 32\n\t" \ + "dsrl\t%M0, %M0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + ".set\tmips0" \ + : "=r" (__val)); \ + local_irq_restore(__flags); \ + \ + __val; \ +}) + +#define __write_64bit_c0_split(source, sel, val) \ +do { \ + unsigned long __flags; \ + \ + local_irq_save(__flags); \ + if (sel == 0) \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dsll\t%L0, %L0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + "dsll\t%M0, %M0, 32\n\t" \ + "or\t%L0, %L0, %M0\n\t" \ + "dmtc0\t%L0, " #source "\n\t" \ + ".set\tmips0" \ + : : "r" (val)); \ + else \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dsll\t%L0, %L0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + "dsll\t%M0, %M0, 32\n\t" \ + "or\t%L0, %L0, %M0\n\t" \ + "dmtc0\t%L0, " #source ", " #sel "\n\t" \ + ".set\tmips0" \ + : : "r" (val)); \ + local_irq_restore(__flags); \ +} while (0) + +#define read_c0_index() __read_32bit_c0_register($0, 0) +#define write_c0_index(val) __write_32bit_c0_register($0, 0, val) + +#define read_c0_random() __read_32bit_c0_register($1, 0) +#define write_c0_random(val) __write_32bit_c0_register($1, 0, val) + +#define read_c0_entrylo0() __read_ulong_c0_register($2, 0) +#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val) + +#define read_c0_entrylo1() __read_ulong_c0_register($3, 0) +#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val) + +#define read_c0_conf() __read_32bit_c0_register($3, 0) +#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val) + +#define read_c0_context() __read_ulong_c0_register($4, 0) +#define write_c0_context(val) __write_ulong_c0_register($4, 0, val) + +#define read_c0_userlocal() __read_ulong_c0_register($4, 2) +#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val) + +#define read_c0_pagemask() __read_32bit_c0_register($5, 0) +#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) + +#define read_c0_wired() __read_32bit_c0_register($6, 0) +#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val) + +#define read_c0_info() __read_32bit_c0_register($7, 0) + +#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */ +#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val) + +#define read_c0_badvaddr() __read_ulong_c0_register($8, 0) +#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val) + +#define read_c0_count() __read_32bit_c0_register($9, 0) +#define write_c0_count(val) __write_32bit_c0_register($9, 0, val) + +#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */ +#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val) + +#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */ +#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val) + +#define read_c0_entryhi() __read_ulong_c0_register($10, 0) +#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val) + +#define read_c0_compare() __read_32bit_c0_register($11, 0) +#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val) + +#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */ +#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val) + +#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */ +#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val) + +#define read_c0_status() __read_32bit_c0_register($12, 0) +#ifdef CONFIG_MIPS_MT_SMTC +#define write_c0_status(val) \ +do { \ + __write_32bit_c0_register($12, 0, val); \ + __ehb(); \ +} while (0) +#else +/* + * Legacy non-SMTC code, which may be hazardous + * but which might not support EHB + */ +#define write_c0_status(val) __write_32bit_c0_register($12, 0, val) +#endif /* CONFIG_MIPS_MT_SMTC */ + +#define read_c0_cause() __read_32bit_c0_register($13, 0) +#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val) + +#define read_c0_epc() __read_ulong_c0_register($14, 0) +#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val) + +#define read_c0_prid() __read_32bit_c0_register($15, 0) + +#define read_c0_config() __read_32bit_c0_register($16, 0) +#define read_c0_config1() __read_32bit_c0_register($16, 1) +#define read_c0_config2() __read_32bit_c0_register($16, 2) +#define read_c0_config3() __read_32bit_c0_register($16, 3) +#define read_c0_config4() __read_32bit_c0_register($16, 4) +#define read_c0_config5() __read_32bit_c0_register($16, 5) +#define read_c0_config6() __read_32bit_c0_register($16, 6) +#define read_c0_config7() __read_32bit_c0_register($16, 7) +#define write_c0_config(val) __write_32bit_c0_register($16, 0, val) +#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val) +#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val) +#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val) +#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val) +#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val) +#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val) +#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val) + +/* + * The WatchLo register. There may be upto 8 of them. + */ +#define read_c0_watchlo0() __read_ulong_c0_register($18, 0) +#define read_c0_watchlo1() __read_ulong_c0_register($18, 1) +#define read_c0_watchlo2() __read_ulong_c0_register($18, 2) +#define read_c0_watchlo3() __read_ulong_c0_register($18, 3) +#define read_c0_watchlo4() __read_ulong_c0_register($18, 4) +#define read_c0_watchlo5() __read_ulong_c0_register($18, 5) +#define read_c0_watchlo6() __read_ulong_c0_register($18, 6) +#define read_c0_watchlo7() __read_ulong_c0_register($18, 7) +#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val) +#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val) +#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val) +#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val) +#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val) +#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val) +#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val) +#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val) + +/* + * The WatchHi register. There may be upto 8 of them. + */ +#define read_c0_watchhi0() __read_32bit_c0_register($19, 0) +#define read_c0_watchhi1() __read_32bit_c0_register($19, 1) +#define read_c0_watchhi2() __read_32bit_c0_register($19, 2) +#define read_c0_watchhi3() __read_32bit_c0_register($19, 3) +#define read_c0_watchhi4() __read_32bit_c0_register($19, 4) +#define read_c0_watchhi5() __read_32bit_c0_register($19, 5) +#define read_c0_watchhi6() __read_32bit_c0_register($19, 6) +#define read_c0_watchhi7() __read_32bit_c0_register($19, 7) + +#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val) +#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val) +#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val) +#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val) +#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val) +#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val) +#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val) +#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val) + +#define read_c0_xcontext() __read_ulong_c0_register($20, 0) +#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val) + +#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20) +#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val) + +#define read_c0_framemask() __read_32bit_c0_register($21, 0) +#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val) + +/* RM9000 PerfControl performance counter control register */ +#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0) +#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val) + +#define read_c0_diag() __read_32bit_c0_register($22, 0) +#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val) + +#define read_c0_diag1() __read_32bit_c0_register($22, 1) +#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val) + +#define read_c0_diag2() __read_32bit_c0_register($22, 2) +#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val) + +#define read_c0_diag3() __read_32bit_c0_register($22, 3) +#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val) + +#define read_c0_diag4() __read_32bit_c0_register($22, 4) +#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val) + +#define read_c0_diag5() __read_32bit_c0_register($22, 5) +#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val) + +#define read_c0_debug() __read_32bit_c0_register($23, 0) +#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val) + +#define read_c0_depc() __read_ulong_c0_register($24, 0) +#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val) + +/* + * MIPS32 / MIPS64 performance counters + */ +#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0) +#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val) +#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1) +#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val) +#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2) +#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val) +#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3) +#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val) +#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4) +#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val) +#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5) +#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val) +#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6) +#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val) +#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7) +#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val) + +/* RM9000 PerfCount performance counter register */ +#define read_c0_perfcount() __read_64bit_c0_register($25, 0) +#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val) + +#define read_c0_ecc() __read_32bit_c0_register($26, 0) +#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val) + +#define read_c0_derraddr0() __read_ulong_c0_register($26, 1) +#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val) + +#define read_c0_cacheerr() __read_32bit_c0_register($27, 0) + +#define read_c0_derraddr1() __read_ulong_c0_register($27, 1) +#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val) + +#define read_c0_taglo() __read_32bit_c0_register($28, 0) +#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val) + +#define read_c0_dtaglo() __read_32bit_c0_register($28, 2) +#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val) + +#define read_c0_taghi() __read_32bit_c0_register($29, 0) +#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val) + +#define read_c0_errorepc() __read_ulong_c0_register($30, 0) +#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val) + +/* MIPSR2 */ +#define read_c0_hwrena() __read_32bit_c0_register($7, 0) +#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val) + +#define read_c0_intctl() __read_32bit_c0_register($12, 1) +#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val) + +#define read_c0_srsctl() __read_32bit_c0_register($12, 2) +#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val) + +#define read_c0_srsmap() __read_32bit_c0_register($12, 3) +#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val) + +#define read_c0_ebase() __read_32bit_c0_register($15, 1) +#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val) + +/* + * Macros to access the floating point coprocessor control registers + */ +#define read_32bit_cp1_register(source) \ +({ int __res; \ + __asm__ __volatile__( \ + ".set\tpush\n\t" \ + ".set\treorder\n\t" \ + "cfc1\t%0,"STR(source)"\n\t" \ + ".set\tpop" \ + : "=r" (__res)); \ + __res;}) + +#define rddsp(mask) \ +({ \ + unsigned int __res; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # rddsp $1, %x1 \n" \ + " .word 0x7c000cb8 | (%x1 << 16) \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__res) \ + : "i" (mask)); \ + __res; \ +}) + +#define wrdsp(val, mask) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # wrdsp $1, %x1 \n" \ + " .word 0x7c2004f8 | (%x1 << 11) \n" \ + " .set pop \n" \ + : \ + : "r" (val), "i" (mask)); \ +} while (0) + +#if 0 /* Need DSP ASE capable assembler ... */ +#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;}) +#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;}) +#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;}) +#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;}) + +#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;}) +#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;}) +#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;}) +#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;}) + +#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x)) +#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x)) +#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x)) +#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x)) + +#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x)) +#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x)) +#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x)) +#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x)) + +#else + +#define mfhi0() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac0 \n" \ + " .word 0x00000810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mfhi1() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac1 \n" \ + " .word 0x00200810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mfhi2() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac2 \n" \ + " .word 0x00400810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mfhi3() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mfhi %0, $ac3 \n" \ + " .word 0x00600810 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo0() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac0 \n" \ + " .word 0x00000812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo1() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac1 \n" \ + " .word 0x00200812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo2() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac2 \n" \ + " .word 0x00400812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mflo3() \ +({ \ + unsigned long __treg; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # mflo %0, $ac3 \n" \ + " .word 0x00600812 \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__treg)); \ + __treg; \ +}) + +#define mthi0(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac0 \n" \ + " .word 0x00200011 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mthi1(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac1 \n" \ + " .word 0x00200811 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mthi2(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac2 \n" \ + " .word 0x00201011 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mthi3(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mthi $1, $ac3 \n" \ + " .word 0x00201811 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo0(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac0 \n" \ + " .word 0x00200013 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo1(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac1 \n" \ + " .word 0x00200813 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo2(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac2 \n" \ + " .word 0x00201013 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#define mtlo3(x) \ +do { \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " move $1, %0 \n" \ + " # mtlo $1, $ac3 \n" \ + " .word 0x00201813 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +} while (0) + +#endif + +/* + * TLB operations. + * + * It is responsibility of the caller to take care of any TLB hazards. + */ +static inline void tlb_probe(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbp\n\t" + ".set reorder"); +} + +static inline void tlb_read(void) +{ +#if MIPS34K_MISSED_ITLB_WAR + int res = 0; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41610001 # dvpe $1 \n" + " move %0, $1 \n" + " ehb \n" + " .set pop \n" + : "=r" (res)); + + instruction_hazard(); +#endif + + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbr\n\t" + ".set reorder"); + +#if MIPS34K_MISSED_ITLB_WAR + if ((res & _ULCAST_(1))) + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set noat \n" + " .set mips32r2 \n" + " .word 0x41600021 # evpe \n" + " ehb \n" + " .set pop \n"); +#endif +} + +static inline void tlb_write_indexed(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbwi\n\t" + ".set reorder"); +} + +static inline void tlb_write_random(void) +{ + __asm__ __volatile__( + ".set noreorder\n\t" + "tlbwr\n\t" + ".set reorder"); +} + +/* + * Manipulate bits in a c0 register. + */ +#ifndef CONFIG_MIPS_MT_SMTC +/* + * SMTC Linux requires shutting-down microthread scheduling + * during CP0 register read-modify-write sequences. + */ +#define __BUILD_SET_C0(name) \ +static inline unsigned int \ +set_c0_##name(unsigned int set) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res |= set; \ + write_c0_##name(res); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +clear_c0_##name(unsigned int clear) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res &= ~clear; \ + write_c0_##name(res); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +change_c0_##name(unsigned int change, unsigned int new) \ +{ \ + unsigned int res; \ + \ + res = read_c0_##name(); \ + res &= ~change; \ + res |= (new & change); \ + write_c0_##name(res); \ + \ + return res; \ +} + +#else /* SMTC versions that manage MT scheduling */ + +#include + +/* + * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with + * header file recursion. + */ +static inline unsigned int __dmt(void) +{ + int res; + + __asm__ __volatile__( + " .set push \n" + " .set mips32r2 \n" + " .set noat \n" + " .word 0x41610BC1 # dmt $1 \n" + " ehb \n" + " move %0, $1 \n" + " .set pop \n" + : "=r" (res)); + + instruction_hazard(); + + return res; +} + +#define __VPECONTROL_TE_SHIFT 15 +#define __VPECONTROL_TE (1UL << __VPECONTROL_TE_SHIFT) + +#define __EMT_ENABLE __VPECONTROL_TE + +static inline void __emt(unsigned int previous) +{ + if ((previous & __EMT_ENABLE)) + __asm__ __volatile__( + " .set mips32r2 \n" + " .word 0x41600be1 # emt \n" + " ehb \n" + " .set mips0 \n"); +} + +static inline void __ehb(void) +{ + __asm__ __volatile__( + " .set mips32r2 \n" + " ehb \n" " .set mips0 \n"); +} + +/* + * Note that local_irq_save/restore affect TC-specific IXMT state, + * not Status.IE as in non-SMTC kernel. + */ + +#define __BUILD_SET_C0(name) \ +static inline unsigned int \ +set_c0_##name(unsigned int set) \ +{ \ + unsigned int res; \ + unsigned int omt; \ + unsigned long flags; \ + \ + local_irq_save(flags); \ + omt = __dmt(); \ + res = read_c0_##name(); \ + res |= set; \ + write_c0_##name(res); \ + __emt(omt); \ + local_irq_restore(flags); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +clear_c0_##name(unsigned int clear) \ +{ \ + unsigned int res; \ + unsigned int omt; \ + unsigned long flags; \ + \ + local_irq_save(flags); \ + omt = __dmt(); \ + res = read_c0_##name(); \ + res &= ~clear; \ + write_c0_##name(res); \ + __emt(omt); \ + local_irq_restore(flags); \ + \ + return res; \ +} \ + \ +static inline unsigned int \ +change_c0_##name(unsigned int change, unsigned int new) \ +{ \ + unsigned int res; \ + unsigned int omt; \ + unsigned long flags; \ + \ + local_irq_save(flags); \ + \ + omt = __dmt(); \ + res = read_c0_##name(); \ + res &= ~change; \ + res |= (new & change); \ + write_c0_##name(res); \ + __emt(omt); \ + local_irq_restore(flags); \ + \ + return res; \ +} +#endif + +__BUILD_SET_C0(status) +__BUILD_SET_C0(cause) +__BUILD_SET_C0(config) +__BUILD_SET_C0(intcontrol) +__BUILD_SET_C0(intctl) +__BUILD_SET_C0(srsmap) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_MIPSREGS_H */ diff --git a/arch/mips/include/asm/mman.h b/arch/mips/include/asm/mman.h new file mode 100644 index 000000000000..e4d6f1fb1cf7 --- /dev/null +++ b/arch/mips/include/asm/mman.h @@ -0,0 +1,77 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999, 2002 by Ralf Baechle + */ +#ifndef _ASM_MMAN_H +#define _ASM_MMAN_H + +/* + * Protections are chosen from these bits, OR'd together. The + * implementation does not necessarily support PROT_EXEC or PROT_WRITE + * without PROT_READ. The only guarantees are that no writing will be + * allowed without PROT_WRITE and no access will be allowed for PROT_NONE. + */ +#define PROT_NONE 0x00 /* page can not be accessed */ +#define PROT_READ 0x01 /* page can be read */ +#define PROT_WRITE 0x02 /* page can be written */ +#define PROT_EXEC 0x04 /* page can be executed */ +/* 0x08 reserved for PROT_EXEC_NOFLUSH */ +#define PROT_SEM 0x10 /* page may be used for atomic ops */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ + +/* + * Flags for mmap + */ +#define MAP_SHARED 0x001 /* Share changes */ +#define MAP_PRIVATE 0x002 /* Changes are private */ +#define MAP_TYPE 0x00f /* Mask for type of mapping */ +#define MAP_FIXED 0x010 /* Interpret addr exactly */ + +/* not used by linux, but here to make sure we don't clash with ABI defines */ +#define MAP_RENAME 0x020 /* Assign page to file */ +#define MAP_AUTOGROW 0x040 /* File may grow by writing */ +#define MAP_LOCAL 0x080 /* Copy on fork/sproc */ +#define MAP_AUTORSRV 0x100 /* Logical swap reserved on demand */ + +/* These are linux-specific */ +#define MAP_NORESERVE 0x0400 /* don't check for reservations */ +#define MAP_ANONYMOUS 0x0800 /* don't use a file */ +#define MAP_GROWSDOWN 0x1000 /* stack-like segment */ +#define MAP_DENYWRITE 0x2000 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x4000 /* mark it as an executable */ +#define MAP_LOCKED 0x8000 /* pages are locked */ +#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x20000 /* do not block on IO */ + +/* + * Flags for msync + */ +#define MS_ASYNC 0x0001 /* sync memory asynchronously */ +#define MS_INVALIDATE 0x0002 /* invalidate mappings & caches */ +#define MS_SYNC 0x0004 /* synchronous memory sync */ + +/* + * Flags for mlockall + */ +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#define MADV_NORMAL 0 /* no further special treatment */ +#define MADV_RANDOM 1 /* expect random page references */ +#define MADV_SEQUENTIAL 2 /* expect sequential page references */ +#define MADV_WILLNEED 3 /* will need these pages */ +#define MADV_DONTNEED 4 /* don't need these pages */ + +/* common parameters: try to keep these consistent across architectures */ +#define MADV_REMOVE 9 /* remove these pages & resources */ +#define MADV_DONTFORK 10 /* don't inherit across fork */ +#define MADV_DOFORK 11 /* do inherit across fork */ + +/* compatibility flags */ +#define MAP_FILE 0 + +#endif /* _ASM_MMAN_H */ diff --git a/arch/mips/include/asm/mmu.h b/arch/mips/include/asm/mmu.h new file mode 100644 index 000000000000..4063edd79623 --- /dev/null +++ b/arch/mips/include/asm/mmu.h @@ -0,0 +1,6 @@ +#ifndef __ASM_MMU_H +#define __ASM_MMU_H + +typedef unsigned long mm_context_t[NR_CPUS]; + +#endif /* __ASM_MMU_H */ diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h new file mode 100644 index 000000000000..d7f3eb03ad12 --- /dev/null +++ b/arch/mips/include/asm/mmu_context.h @@ -0,0 +1,297 @@ +/* + * Switch a MMU context. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1998, 1999 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_MMU_CONTEXT_H +#define _ASM_MMU_CONTEXT_H + +#include +#include +#include +#include +#include +#ifdef CONFIG_MIPS_MT_SMTC +#include +#include +#endif /* SMTC */ +#include + +/* + * For the fast tlb miss handlers, we keep a per cpu array of pointers + * to the current pgd for each processor. Also, the proc. id is stuffed + * into the context register. + */ +extern unsigned long pgd_current[]; + +#define TLBMISS_HANDLER_SETUP_PGD(pgd) \ + pgd_current[smp_processor_id()] = (unsigned long)(pgd) + +#ifdef CONFIG_32BIT +#define TLBMISS_HANDLER_SETUP() \ + write_c0_context((unsigned long) smp_processor_id() << 25); \ + TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) +#endif +#ifdef CONFIG_64BIT +#define TLBMISS_HANDLER_SETUP() \ + write_c0_context((unsigned long) smp_processor_id() << 26); \ + TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) +#endif + +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + +#define ASID_INC 0x40 +#define ASID_MASK 0xfc0 + +#elif defined(CONFIG_CPU_R8000) + +#define ASID_INC 0x10 +#define ASID_MASK 0xff0 + +#elif defined(CONFIG_CPU_RM9000) + +#define ASID_INC 0x1 +#define ASID_MASK 0xfff + +/* SMTC/34K debug hack - but maybe we'll keep it */ +#elif defined(CONFIG_MIPS_MT_SMTC) + +#define ASID_INC 0x1 +extern unsigned long smtc_asid_mask; +#define ASID_MASK (smtc_asid_mask) +#define HW_ASID_MASK 0xff +/* End SMTC/34K debug hack */ +#else /* FIXME: not correct for R6000 */ + +#define ASID_INC 0x1 +#define ASID_MASK 0xff + +#endif + +#define cpu_context(cpu, mm) ((mm)->context[cpu]) +#define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & ASID_MASK) +#define asid_cache(cpu) (cpu_data[cpu].asid_cache) + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +/* + * All unused by hardware upper bits will be considered + * as a software asid extension. + */ +#define ASID_VERSION_MASK ((unsigned long)~(ASID_MASK|(ASID_MASK-1))) +#define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1) + +#ifndef CONFIG_MIPS_MT_SMTC +/* Normal, classic MIPS get_new_mmu_context */ +static inline void +get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) +{ + unsigned long asid = asid_cache(cpu); + + if (! ((asid += ASID_INC) & ASID_MASK) ) { + if (cpu_has_vtag_icache) + flush_icache_all(); + local_flush_tlb_all(); /* start new asid cycle */ + if (!asid) /* fix version if needed */ + asid = ASID_FIRST_VERSION; + } + cpu_context(cpu, mm) = asid_cache(cpu) = asid; +} + +#else /* CONFIG_MIPS_MT_SMTC */ + +#define get_new_mmu_context(mm, cpu) smtc_get_new_mmu_context((mm), (cpu)) + +#endif /* CONFIG_MIPS_MT_SMTC */ + +/* + * Initialize the context related info for a new mm_struct + * instance. + */ +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + int i; + + for_each_online_cpu(i) + cpu_context(i, mm) = 0; + + return 0; +} + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + unsigned int cpu = smp_processor_id(); + unsigned long flags; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long oldasid; + unsigned long mtflags; + int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id; + local_irq_save(flags); + mtflags = dvpe(); +#else /* Not SMTC */ + local_irq_save(flags); +#endif /* CONFIG_MIPS_MT_SMTC */ + + /* Check if our ASID is of an older version and thus invalid */ + if ((cpu_context(cpu, next) ^ asid_cache(cpu)) & ASID_VERSION_MASK) + get_new_mmu_context(next, cpu); +#ifdef CONFIG_MIPS_MT_SMTC + /* + * If the EntryHi ASID being replaced happens to be + * the value flagged at ASID recycling time as having + * an extended life, clear the bit showing it being + * in use by this "CPU", and if that's the last bit, + * free up the ASID value for use and flush any old + * instances of it from the TLB. + */ + oldasid = (read_c0_entryhi() & ASID_MASK); + if(smtc_live_asid[mytlb][oldasid]) { + smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); + if(smtc_live_asid[mytlb][oldasid] == 0) + smtc_flush_tlb_asid(oldasid); + } + /* + * Tread softly on EntryHi, and so long as we support + * having ASID_MASK smaller than the hardware maximum, + * make sure no "soft" bits become "hard"... + */ + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) + | (cpu_context(cpu, next) & ASID_MASK)); + ehb(); /* Make sure it propagates to TCStatus */ + evpe(mtflags); +#else + write_c0_entryhi(cpu_context(cpu, next)); +#endif /* CONFIG_MIPS_MT_SMTC */ + TLBMISS_HANDLER_SETUP_PGD(next->pgd); + + /* + * Mark current->active_mm as not "active" anymore. + * We don't want to mislead possible IPI tlb flush routines. + */ + cpu_clear(cpu, prev->cpu_vm_mask); + cpu_set(cpu, next->cpu_vm_mask); + + local_irq_restore(flags); +} + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +static inline void destroy_context(struct mm_struct *mm) +{ +} + +#define deactivate_mm(tsk, mm) do { } while (0) + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void +activate_mm(struct mm_struct *prev, struct mm_struct *next) +{ + unsigned long flags; + unsigned int cpu = smp_processor_id(); + +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long oldasid; + unsigned long mtflags; + int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id; +#endif /* CONFIG_MIPS_MT_SMTC */ + + local_irq_save(flags); + + /* Unconditionally get a new ASID. */ + get_new_mmu_context(next, cpu); + +#ifdef CONFIG_MIPS_MT_SMTC + /* See comments for similar code above */ + mtflags = dvpe(); + oldasid = read_c0_entryhi() & ASID_MASK; + if(smtc_live_asid[mytlb][oldasid]) { + smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); + if(smtc_live_asid[mytlb][oldasid] == 0) + smtc_flush_tlb_asid(oldasid); + } + /* See comments for similar code above */ + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | + (cpu_context(cpu, next) & ASID_MASK)); + ehb(); /* Make sure it propagates to TCStatus */ + evpe(mtflags); +#else + write_c0_entryhi(cpu_context(cpu, next)); +#endif /* CONFIG_MIPS_MT_SMTC */ + TLBMISS_HANDLER_SETUP_PGD(next->pgd); + + /* mark mmu ownership change */ + cpu_clear(cpu, prev->cpu_vm_mask); + cpu_set(cpu, next->cpu_vm_mask); + + local_irq_restore(flags); +} + +/* + * If mm is currently active_mm, we can't really drop it. Instead, + * we will get a new one for it. + */ +static inline void +drop_mmu_context(struct mm_struct *mm, unsigned cpu) +{ + unsigned long flags; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long oldasid; + /* Can't use spinlock because called from TLB flush within DVPE */ + unsigned int prevvpe; + int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id; +#endif /* CONFIG_MIPS_MT_SMTC */ + + local_irq_save(flags); + + if (cpu_isset(cpu, mm->cpu_vm_mask)) { + get_new_mmu_context(mm, cpu); +#ifdef CONFIG_MIPS_MT_SMTC + /* See comments for similar code above */ + prevvpe = dvpe(); + oldasid = (read_c0_entryhi() & ASID_MASK); + if (smtc_live_asid[mytlb][oldasid]) { + smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); + if(smtc_live_asid[mytlb][oldasid] == 0) + smtc_flush_tlb_asid(oldasid); + } + /* See comments for similar code above */ + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) + | cpu_asid(cpu, mm)); + ehb(); /* Make sure it propagates to TCStatus */ + evpe(prevvpe); +#else /* not CONFIG_MIPS_MT_SMTC */ + write_c0_entryhi(cpu_asid(cpu, mm)); +#endif /* CONFIG_MIPS_MT_SMTC */ + } else { + /* will get a new context next time */ +#ifndef CONFIG_MIPS_MT_SMTC + cpu_context(cpu, mm) = 0; +#else /* SMTC */ + int i; + + /* SMTC shares the TLB (and ASIDs) across VPEs */ + for_each_online_cpu(i) { + if((smtc_status & SMTC_TLB_SHARED) + || (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id)) + cpu_context(i, mm) = 0; + } +#endif /* CONFIG_MIPS_MT_SMTC */ + } + local_irq_restore(flags); +} + +#endif /* _ASM_MMU_CONTEXT_H */ diff --git a/arch/mips/include/asm/mmzone.h b/arch/mips/include/asm/mmzone.h new file mode 100644 index 000000000000..f53ec54c92ff --- /dev/null +++ b/arch/mips/include/asm/mmzone.h @@ -0,0 +1,17 @@ +/* + * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99 + * Rewritten for Linux 2.6 by Christoph Hellwig (hch@lst.de) Jan 2004 + */ +#ifndef _ASM_MMZONE_H_ +#define _ASM_MMZONE_H_ + +#include +#include + +#ifdef CONFIG_DISCONTIGMEM + +#define pfn_to_nid(pfn) pa_to_nid((pfn) << PAGE_SHIFT) + +#endif /* CONFIG_DISCONTIGMEM */ + +#endif /* _ASM_MMZONE_H_ */ diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h new file mode 100644 index 000000000000..de6d09ebbd80 --- /dev/null +++ b/arch/mips/include/asm/module.h @@ -0,0 +1,136 @@ +#ifndef _ASM_MODULE_H +#define _ASM_MODULE_H + +#include +#include + +struct mod_arch_specific { + /* Data Bus Error exception tables */ + struct list_head dbe_list; + const struct exception_table_entry *dbe_start; + const struct exception_table_entry *dbe_end; +}; + +typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ + +typedef struct { + Elf64_Addr r_offset; /* Address of relocation. */ + Elf64_Word r_sym; /* Symbol index. */ + Elf64_Byte r_ssym; /* Special symbol. */ + Elf64_Byte r_type3; /* Third relocation. */ + Elf64_Byte r_type2; /* Second relocation. */ + Elf64_Byte r_type; /* First relocation. */ +} Elf64_Mips_Rel; + +typedef struct { + Elf64_Addr r_offset; /* Address of relocation. */ + Elf64_Word r_sym; /* Symbol index. */ + Elf64_Byte r_ssym; /* Special symbol. */ + Elf64_Byte r_type3; /* Third relocation. */ + Elf64_Byte r_type2; /* Second relocation. */ + Elf64_Byte r_type; /* First relocation. */ + Elf64_Sxword r_addend; /* Addend. */ +} Elf64_Mips_Rela; + +#ifdef CONFIG_32BIT + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr +#define Elf_Addr Elf32_Addr + +#define Elf_Mips_Rel Elf32_Rel +#define Elf_Mips_Rela Elf32_Rela + +#define ELF_MIPS_R_SYM(rel) ELF32_R_SYM(rel.r_info) +#define ELF_MIPS_R_TYPE(rel) ELF32_R_TYPE(rel.r_info) + +#endif + +#ifdef CONFIG_64BIT + +#define Elf_Shdr Elf64_Shdr +#define Elf_Sym Elf64_Sym +#define Elf_Ehdr Elf64_Ehdr +#define Elf_Addr Elf64_Addr + +#define Elf_Mips_Rel Elf64_Mips_Rel +#define Elf_Mips_Rela Elf64_Mips_Rela + +#define ELF_MIPS_R_SYM(rel) (rel.r_sym) +#define ELF_MIPS_R_TYPE(rel) (rel.r_type) + +#endif + +#ifdef CONFIG_MODULES +/* Given an address, look for it in the exception tables. */ +const struct exception_table_entry*search_module_dbetables(unsigned long addr); +#else +/* Given an address, look for it in the exception tables. */ +static inline const struct exception_table_entry * +search_module_dbetables(unsigned long addr) +{ + return NULL; +} +#endif + +#ifdef CONFIG_CPU_MIPS32_R1 +#define MODULE_PROC_FAMILY "MIPS32_R1 " +#elif defined CONFIG_CPU_MIPS32_R2 +#define MODULE_PROC_FAMILY "MIPS32_R2 " +#elif defined CONFIG_CPU_MIPS64_R1 +#define MODULE_PROC_FAMILY "MIPS64_R1 " +#elif defined CONFIG_CPU_MIPS64_R2 +#define MODULE_PROC_FAMILY "MIPS64_R2 " +#elif defined CONFIG_CPU_R3000 +#define MODULE_PROC_FAMILY "R3000 " +#elif defined CONFIG_CPU_TX39XX +#define MODULE_PROC_FAMILY "TX39XX " +#elif defined CONFIG_CPU_VR41XX +#define MODULE_PROC_FAMILY "VR41XX " +#elif defined CONFIG_CPU_R4300 +#define MODULE_PROC_FAMILY "R4300 " +#elif defined CONFIG_CPU_R4X00 +#define MODULE_PROC_FAMILY "R4X00 " +#elif defined CONFIG_CPU_TX49XX +#define MODULE_PROC_FAMILY "TX49XX " +#elif defined CONFIG_CPU_R5000 +#define MODULE_PROC_FAMILY "R5000 " +#elif defined CONFIG_CPU_R5432 +#define MODULE_PROC_FAMILY "R5432 " +#elif defined CONFIG_CPU_R6000 +#define MODULE_PROC_FAMILY "R6000 " +#elif defined CONFIG_CPU_NEVADA +#define MODULE_PROC_FAMILY "NEVADA " +#elif defined CONFIG_CPU_R8000 +#define MODULE_PROC_FAMILY "R8000 " +#elif defined CONFIG_CPU_R10000 +#define MODULE_PROC_FAMILY "R10000 " +#elif defined CONFIG_CPU_RM7000 +#define MODULE_PROC_FAMILY "RM7000 " +#elif defined CONFIG_CPU_RM9000 +#define MODULE_PROC_FAMILY "RM9000 " +#elif defined CONFIG_CPU_SB1 +#define MODULE_PROC_FAMILY "SB1 " +#elif defined CONFIG_CPU_LOONGSON2 +#define MODULE_PROC_FAMILY "LOONGSON2 " +#else +#error MODULE_PROC_FAMILY undefined for your processor configuration +#endif + +#ifdef CONFIG_32BIT +#define MODULE_KERNEL_TYPE "32BIT " +#elif defined CONFIG_64BIT +#define MODULE_KERNEL_TYPE "64BIT " +#endif + +#ifdef CONFIG_MIPS_MT_SMTC +#define MODULE_KERNEL_SMTC "MT_SMTC " +#else +#define MODULE_KERNEL_SMTC "" +#endif + +#define MODULE_ARCH_VERMAGIC \ + MODULE_PROC_FAMILY MODULE_KERNEL_TYPE MODULE_KERNEL_SMTC + +#endif /* _ASM_MODULE_H */ diff --git a/arch/mips/include/asm/msc01_ic.h b/arch/mips/include/asm/msc01_ic.h new file mode 100644 index 000000000000..7989b9ffc1d2 --- /dev/null +++ b/arch/mips/include/asm/msc01_ic.h @@ -0,0 +1,148 @@ +/* + * PCI Register definitions for the MIPS System Controller. + * + * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ASM_MIPS_BOARDS_MSC01_IC_H +#define __ASM_MIPS_BOARDS_MSC01_IC_H + +/***************************************************************************** + * Register offset addresses + *****************************************************************************/ + +#define MSC01_IC_RST_OFS 0x00008 /* Software reset */ +#define MSC01_IC_ENAL_OFS 0x00100 /* Int_in enable mask 31:0 */ +#define MSC01_IC_ENAH_OFS 0x00108 /* Int_in enable mask 63:32 */ +#define MSC01_IC_DISL_OFS 0x00120 /* Int_in disable mask 31:0 */ +#define MSC01_IC_DISH_OFS 0x00128 /* Int_in disable mask 63:32 */ +#define MSC01_IC_ISBL_OFS 0x00140 /* Raw int_in 31:0 */ +#define MSC01_IC_ISBH_OFS 0x00148 /* Raw int_in 63:32 */ +#define MSC01_IC_ISAL_OFS 0x00160 /* Masked int_in 31:0 */ +#define MSC01_IC_ISAH_OFS 0x00168 /* Masked int_in 63:32 */ +#define MSC01_IC_LVL_OFS 0x00180 /* Disable priority int_out */ +#define MSC01_IC_RAMW_OFS 0x00180 /* Shadow set RAM (EI) */ +#define MSC01_IC_OSB_OFS 0x00188 /* Raw int_out */ +#define MSC01_IC_OSA_OFS 0x00190 /* Masked int_out */ +#define MSC01_IC_GENA_OFS 0x00198 /* Global HW int enable */ +#define MSC01_IC_BASE_OFS 0x001a0 /* Base address of IC_VEC */ +#define MSC01_IC_VEC_OFS 0x001b0 /* Active int's vector address */ +#define MSC01_IC_EOI_OFS 0x001c0 /* Enable lower level ints */ +#define MSC01_IC_CFG_OFS 0x001c8 /* Configuration register */ +#define MSC01_IC_TRLD_OFS 0x001d0 /* Interval timer reload val */ +#define MSC01_IC_TVAL_OFS 0x001e0 /* Interval timer current val */ +#define MSC01_IC_TCFG_OFS 0x001f0 /* Interval timer config */ +#define MSC01_IC_SUP_OFS 0x00200 /* Set up int_in line 0 */ +#define MSC01_IC_ENA_OFS 0x00800 /* Int_in enable mask 63:0 */ +#define MSC01_IC_DIS_OFS 0x00820 /* Int_in disable mask 63:0 */ +#define MSC01_IC_ISB_OFS 0x00840 /* Raw int_in 63:0 */ +#define MSC01_IC_ISA_OFS 0x00860 /* Masked int_in 63:0 */ + +/***************************************************************************** + * Register field encodings + *****************************************************************************/ + +#define MSC01_IC_RST_RST_SHF 0 +#define MSC01_IC_RST_RST_MSK 0x00000001 +#define MSC01_IC_RST_RST_BIT MSC01_IC_RST_RST_MSK +#define MSC01_IC_LVL_LVL_SHF 0 +#define MSC01_IC_LVL_LVL_MSK 0x000000ff +#define MSC01_IC_LVL_SPUR_SHF 16 +#define MSC01_IC_LVL_SPUR_MSK 0x00010000 +#define MSC01_IC_LVL_SPUR_BIT MSC01_IC_LVL_SPUR_MSK +#define MSC01_IC_RAMW_RIPL_SHF 0 +#define MSC01_IC_RAMW_RIPL_MSK 0x0000003f +#define MSC01_IC_RAMW_DATA_SHF 6 +#define MSC01_IC_RAMW_DATA_MSK 0x00000fc0 +#define MSC01_IC_RAMW_ADDR_SHF 25 +#define MSC01_IC_RAMW_ADDR_MSK 0x7e000000 +#define MSC01_IC_RAMW_READ_SHF 31 +#define MSC01_IC_RAMW_READ_MSK 0x80000000 +#define MSC01_IC_RAMW_READ_BIT MSC01_IC_RAMW_READ_MSK +#define MSC01_IC_OSB_OSB_SHF 0 +#define MSC01_IC_OSB_OSB_MSK 0x000000ff +#define MSC01_IC_OSA_OSA_SHF 0 +#define MSC01_IC_OSA_OSA_MSK 0x000000ff +#define MSC01_IC_GENA_GENA_SHF 0 +#define MSC01_IC_GENA_GENA_MSK 0x00000001 +#define MSC01_IC_GENA_GENA_BIT MSC01_IC_GENA_GENA_MSK +#define MSC01_IC_CFG_DIS_SHF 0 +#define MSC01_IC_CFG_DIS_MSK 0x00000001 +#define MSC01_IC_CFG_DIS_BIT MSC01_IC_CFG_DIS_MSK +#define MSC01_IC_CFG_SHFT_SHF 8 +#define MSC01_IC_CFG_SHFT_MSK 0x00000f00 +#define MSC01_IC_TCFG_ENA_SHF 0 +#define MSC01_IC_TCFG_ENA_MSK 0x00000001 +#define MSC01_IC_TCFG_ENA_BIT MSC01_IC_TCFG_ENA_MSK +#define MSC01_IC_TCFG_INT_SHF 8 +#define MSC01_IC_TCFG_INT_MSK 0x00000100 +#define MSC01_IC_TCFG_INT_BIT MSC01_IC_TCFG_INT_MSK +#define MSC01_IC_TCFG_EDGE_SHF 16 +#define MSC01_IC_TCFG_EDGE_MSK 0x00010000 +#define MSC01_IC_TCFG_EDGE_BIT MSC01_IC_TCFG_EDGE_MSK +#define MSC01_IC_SUP_PRI_SHF 0 +#define MSC01_IC_SUP_PRI_MSK 0x00000007 +#define MSC01_IC_SUP_EDGE_SHF 8 +#define MSC01_IC_SUP_EDGE_MSK 0x00000100 +#define MSC01_IC_SUP_EDGE_BIT MSC01_IC_SUP_EDGE_MSK +#define MSC01_IC_SUP_STEP 8 + +/* + * MIPS System controller interrupt register base. + * + */ + +/***************************************************************************** + * Absolute register addresses + *****************************************************************************/ + +#define MSC01_IC_RST (MSC01_IC_REG_BASE + MSC01_IC_RST_OFS) +#define MSC01_IC_ENAL (MSC01_IC_REG_BASE + MSC01_IC_ENAL_OFS) +#define MSC01_IC_ENAH (MSC01_IC_REG_BASE + MSC01_IC_ENAH_OFS) +#define MSC01_IC_DISL (MSC01_IC_REG_BASE + MSC01_IC_DISL_OFS) +#define MSC01_IC_DISH (MSC01_IC_REG_BASE + MSC01_IC_DISH_OFS) +#define MSC01_IC_ISBL (MSC01_IC_REG_BASE + MSC01_IC_ISBL_OFS) +#define MSC01_IC_ISBH (MSC01_IC_REG_BASE + MSC01_IC_ISBH_OFS) +#define MSC01_IC_ISAL (MSC01_IC_REG_BASE + MSC01_IC_ISAL_OFS) +#define MSC01_IC_ISAH (MSC01_IC_REG_BASE + MSC01_IC_ISAH_OFS) +#define MSC01_IC_LVL (MSC01_IC_REG_BASE + MSC01_IC_LVL_OFS) +#define MSC01_IC_RAMW (MSC01_IC_REG_BASE + MSC01_IC_RAMW_OFS) +#define MSC01_IC_OSB (MSC01_IC_REG_BASE + MSC01_IC_OSB_OFS) +#define MSC01_IC_OSA (MSC01_IC_REG_BASE + MSC01_IC_OSA_OFS) +#define MSC01_IC_GENA (MSC01_IC_REG_BASE + MSC01_IC_GENA_OFS) +#define MSC01_IC_BASE (MSC01_IC_REG_BASE + MSC01_IC_BASE_OFS) +#define MSC01_IC_VEC (MSC01_IC_REG_BASE + MSC01_IC_VEC_OFS) +#define MSC01_IC_EOI (MSC01_IC_REG_BASE + MSC01_IC_EOI_OFS) +#define MSC01_IC_CFG (MSC01_IC_REG_BASE + MSC01_IC_CFG_OFS) +#define MSC01_IC_TRLD (MSC01_IC_REG_BASE + MSC01_IC_TRLD_OFS) +#define MSC01_IC_TVAL (MSC01_IC_REG_BASE + MSC01_IC_TVAL_OFS) +#define MSC01_IC_TCFG (MSC01_IC_REG_BASE + MSC01_IC_TCFG_OFS) +#define MSC01_IC_SUP (MSC01_IC_REG_BASE + MSC01_IC_SUP_OFS) +#define MSC01_IC_ENA (MSC01_IC_REG_BASE + MSC01_IC_ENA_OFS) +#define MSC01_IC_DIS (MSC01_IC_REG_BASE + MSC01_IC_DIS_OFS) +#define MSC01_IC_ISB (MSC01_IC_REG_BASE + MSC01_IC_ISB_OFS) +#define MSC01_IC_ISA (MSC01_IC_REG_BASE + MSC01_IC_ISA_OFS) + +/* + * Soc-it interrupts are configurable. + * Every board describes its IRQ mapping with this table. + */ +typedef struct msc_irqmap { + int im_irq; + int im_type; + int im_lvl; +} msc_irqmap_t; + +/* im_type */ +#define MSC01_IRQ_LEVEL 0 +#define MSC01_IRQ_EDGE 1 + +extern void __init init_msc_irqs(unsigned long icubase, unsigned int base, msc_irqmap_t *imp, int nirq); +extern void ll_msc_irq(void); + +#endif /* __ASM_MIPS_BOARDS_MSC01_IC_H */ + diff --git a/arch/mips/include/asm/msgbuf.h b/arch/mips/include/asm/msgbuf.h new file mode 100644 index 000000000000..0d6c7f14de31 --- /dev/null +++ b/arch/mips/include/asm/msgbuf.h @@ -0,0 +1,47 @@ +#ifndef _ASM_MSGBUF_H +#define _ASM_MSGBUF_H + + +/* + * The msqid64_ds structure for the MIPS architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - extension of time_t to 64-bit on 32-bitsystem to solve the y2038 problem + * - 2 miscellaneous unsigned long values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; +#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN) + unsigned long __unused1; +#endif + __kernel_time_t msg_stime; /* last msgsnd time */ +#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN) + unsigned long __unused1; +#endif +#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN) + unsigned long __unused2; +#endif + __kernel_time_t msg_rtime; /* last msgrcv time */ +#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN) + unsigned long __unused2; +#endif +#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN) + unsigned long __unused3; +#endif + __kernel_time_t msg_ctime; /* last change time */ +#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN) + unsigned long __unused3; +#endif + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASM_MSGBUF_H */ diff --git a/arch/mips/include/asm/mutex.h b/arch/mips/include/asm/mutex.h new file mode 100644 index 000000000000..458c1f7fbc18 --- /dev/null +++ b/arch/mips/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h new file mode 100644 index 000000000000..c3ca959aa4d9 --- /dev/null +++ b/arch/mips/include/asm/nile4.h @@ -0,0 +1,310 @@ +/* + * asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions + * + * Copyright (C) 2000 Geert Uytterhoeven + * Sony Software Development Center Europe (SDCE), Brussels + * + * This file is based on the following documentation: + * + * NEC Vrc 5074 System Controller Data Sheet, June 1998 + */ + +#ifndef _ASM_NILE4_H +#define _ASM_NILE4_H + +#define NILE4_BASE 0xbfa00000 +#define NILE4_SIZE 0x00200000 /* 2 MB */ + + + /* + * Physical Device Address Registers (PDARs) + */ + +#define NILE4_SDRAM0 0x0000 /* SDRAM Bank 0 [R/W] */ +#define NILE4_SDRAM1 0x0008 /* SDRAM Bank 1 [R/W] */ +#define NILE4_DCS2 0x0010 /* Device Chip-Select 2 [R/W] */ +#define NILE4_DCS3 0x0018 /* Device Chip-Select 3 [R/W] */ +#define NILE4_DCS4 0x0020 /* Device Chip-Select 4 [R/W] */ +#define NILE4_DCS5 0x0028 /* Device Chip-Select 5 [R/W] */ +#define NILE4_DCS6 0x0030 /* Device Chip-Select 6 [R/W] */ +#define NILE4_DCS7 0x0038 /* Device Chip-Select 7 [R/W] */ +#define NILE4_DCS8 0x0040 /* Device Chip-Select 8 [R/W] */ +#define NILE4_PCIW0 0x0060 /* PCI Address Window 0 [R/W] */ +#define NILE4_PCIW1 0x0068 /* PCI Address Window 1 [R/W] */ +#define NILE4_INTCS 0x0070 /* Controller Internal Registers and Devices */ + /* [R/W] */ +#define NILE4_BOOTCS 0x0078 /* Boot ROM Chip-Select [R/W] */ + + + /* + * CPU Interface Registers + */ + +#define NILE4_CPUSTAT 0x0080 /* CPU Status [R/W] */ +#define NILE4_INTCTRL 0x0088 /* Interrupt Control [R/W] */ +#define NILE4_INTSTAT0 0x0090 /* Interrupt Status 0 [R] */ +#define NILE4_INTSTAT1 0x0098 /* Interrupt Status 1 and CPU Interrupt */ + /* Enable [R/W] */ +#define NILE4_INTCLR 0x00A0 /* Interrupt Clear [R/W] */ +#define NILE4_INTPPES 0x00A8 /* PCI Interrupt Control [R/W] */ + + + /* + * Memory-Interface Registers + */ + +#define NILE4_MEMCTRL 0x00C0 /* Memory Control */ +#define NILE4_ACSTIME 0x00C8 /* Memory Access Timing [R/W] */ +#define NILE4_CHKERR 0x00D0 /* Memory Check Error Status [R] */ + + + /* + * PCI-Bus Registers + */ + +#define NILE4_PCICTRL 0x00E0 /* PCI Control [R/W] */ +#define NILE4_PCIARB 0x00E8 /* PCI Arbiter [R/W] */ +#define NILE4_PCIINIT0 0x00F0 /* PCI Master (Initiator) 0 [R/W] */ +#define NILE4_PCIINIT1 0x00F8 /* PCI Master (Initiator) 1 [R/W] */ +#define NILE4_PCIERR 0x00B8 /* PCI Error [R/W] */ + + + /* + * Local-Bus Registers + */ + +#define NILE4_LCNFG 0x0100 /* Local Bus Configuration [R/W] */ +#define NILE4_LCST2 0x0110 /* Local Bus Chip-Select Timing 2 [R/W] */ +#define NILE4_LCST3 0x0118 /* Local Bus Chip-Select Timing 3 [R/W] */ +#define NILE4_LCST4 0x0120 /* Local Bus Chip-Select Timing 4 [R/W] */ +#define NILE4_LCST5 0x0128 /* Local Bus Chip-Select Timing 5 [R/W] */ +#define NILE4_LCST6 0x0130 /* Local Bus Chip-Select Timing 6 [R/W] */ +#define NILE4_LCST7 0x0138 /* Local Bus Chip-Select Timing 7 [R/W] */ +#define NILE4_LCST8 0x0140 /* Local Bus Chip-Select Timing 8 [R/W] */ +#define NILE4_DCSFN 0x0150 /* Device Chip-Select Muxing and Output */ + /* Enables [R/W] */ +#define NILE4_DCSIO 0x0158 /* Device Chip-Selects As I/O Bits [R/W] */ +#define NILE4_BCST 0x0178 /* Local Boot Chip-Select Timing [R/W] */ + + + /* + * DMA Registers + */ + +#define NILE4_DMACTRL0 0x0180 /* DMA Control 0 [R/W] */ +#define NILE4_DMASRCA0 0x0188 /* DMA Source Address 0 [R/W] */ +#define NILE4_DMADESA0 0x0190 /* DMA Destination Address 0 [R/W] */ +#define NILE4_DMACTRL1 0x0198 /* DMA Control 1 [R/W] */ +#define NILE4_DMASRCA1 0x01A0 /* DMA Source Address 1 [R/W] */ +#define NILE4_DMADESA1 0x01A8 /* DMA Destination Address 1 [R/W] */ + + + /* + * Timer Registers + */ + +#define NILE4_T0CTRL 0x01C0 /* SDRAM Refresh Control [R/W] */ +#define NILE4_T0CNTR 0x01C8 /* SDRAM Refresh Counter [R/W] */ +#define NILE4_T1CTRL 0x01D0 /* CPU-Bus Read Time-Out Control [R/W] */ +#define NILE4_T1CNTR 0x01D8 /* CPU-Bus Read Time-Out Counter [R/W] */ +#define NILE4_T2CTRL 0x01E0 /* General-Purpose Timer Control [R/W] */ +#define NILE4_T2CNTR 0x01E8 /* General-Purpose Timer Counter [R/W] */ +#define NILE4_T3CTRL 0x01F0 /* Watchdog Timer Control [R/W] */ +#define NILE4_T3CNTR 0x01F8 /* Watchdog Timer Counter [R/W] */ + + + /* + * PCI Configuration Space Registers + */ + +#define NILE4_PCI_BASE 0x0200 + +#define NILE4_VID 0x0200 /* PCI Vendor ID [R] */ +#define NILE4_DID 0x0202 /* PCI Device ID [R] */ +#define NILE4_PCICMD 0x0204 /* PCI Command [R/W] */ +#define NILE4_PCISTS 0x0206 /* PCI Status [R/W] */ +#define NILE4_REVID 0x0208 /* PCI Revision ID [R] */ +#define NILE4_CLASS 0x0209 /* PCI Class Code [R] */ +#define NILE4_CLSIZ 0x020C /* PCI Cache Line Size [R/W] */ +#define NILE4_MLTIM 0x020D /* PCI Latency Timer [R/W] */ +#define NILE4_HTYPE 0x020E /* PCI Header Type [R] */ +#define NILE4_BIST 0x020F /* BIST [R] (unimplemented) */ +#define NILE4_BARC 0x0210 /* PCI Base Address Register Control [R/W] */ +#define NILE4_BAR0 0x0218 /* PCI Base Address Register 0 [R/W] */ +#define NILE4_BAR1 0x0220 /* PCI Base Address Register 1 [R/W] */ +#define NILE4_CIS 0x0228 /* PCI Cardbus CIS Pointer [R] */ + /* (unimplemented) */ +#define NILE4_SSVID 0x022C /* PCI Sub-System Vendor ID [R/W] */ +#define NILE4_SSID 0x022E /* PCI Sub-System ID [R/W] */ +#define NILE4_ROM 0x0230 /* Expansion ROM Base Address [R] */ + /* (unimplemented) */ +#define NILE4_INTLIN 0x023C /* PCI Interrupt Line [R/W] */ +#define NILE4_INTPIN 0x023D /* PCI Interrupt Pin [R] */ +#define NILE4_MINGNT 0x023E /* PCI Min_Gnt [R] (unimplemented) */ +#define NILE4_MAXLAT 0x023F /* PCI Max_Lat [R] (unimplemented) */ +#define NILE4_BAR2 0x0240 /* PCI Base Address Register 2 [R/W] */ +#define NILE4_BAR3 0x0248 /* PCI Base Address Register 3 [R/W] */ +#define NILE4_BAR4 0x0250 /* PCI Base Address Register 4 [R/W] */ +#define NILE4_BAR5 0x0258 /* PCI Base Address Register 5 [R/W] */ +#define NILE4_BAR6 0x0260 /* PCI Base Address Register 6 [R/W] */ +#define NILE4_BAR7 0x0268 /* PCI Base Address Register 7 [R/W] */ +#define NILE4_BAR8 0x0270 /* PCI Base Address Register 8 [R/W] */ +#define NILE4_BARB 0x0278 /* PCI Base Address Register BOOT [R/W] */ + + + /* + * Serial-Port Registers + */ + +#define NILE4_UART_BASE 0x0300 + +#define NILE4_UARTRBR 0x0300 /* UART Receiver Data Buffer [R] */ +#define NILE4_UARTTHR 0x0300 /* UART Transmitter Data Holding [W] */ +#define NILE4_UARTIER 0x0308 /* UART Interrupt Enable [R/W] */ +#define NILE4_UARTDLL 0x0300 /* UART Divisor Latch LSB [R/W] */ +#define NILE4_UARTDLM 0x0308 /* UART Divisor Latch MSB [R/W] */ +#define NILE4_UARTIIR 0x0310 /* UART Interrupt ID [R] */ +#define NILE4_UARTFCR 0x0310 /* UART FIFO Control [W] */ +#define NILE4_UARTLCR 0x0318 /* UART Line Control [R/W] */ +#define NILE4_UARTMCR 0x0320 /* UART Modem Control [R/W] */ +#define NILE4_UARTLSR 0x0328 /* UART Line Status [R/W] */ +#define NILE4_UARTMSR 0x0330 /* UART Modem Status [R/W] */ +#define NILE4_UARTSCR 0x0338 /* UART Scratch [R/W] */ + +#define NILE4_UART_BASE_BAUD 520833 /* 100 MHz / 12 / 16 */ + + + /* + * Interrupt Lines + */ + +#define NILE4_INT_CPCE 0 /* CPU-Interface Parity-Error Interrupt */ +#define NILE4_INT_CNTD 1 /* CPU No-Target Decode Interrupt */ +#define NILE4_INT_MCE 2 /* Memory-Check Error Interrupt */ +#define NILE4_INT_DMA 3 /* DMA Controller Interrupt */ +#define NILE4_INT_UART 4 /* UART Interrupt */ +#define NILE4_INT_WDOG 5 /* Watchdog Timer Interrupt */ +#define NILE4_INT_GPT 6 /* General-Purpose Timer Interrupt */ +#define NILE4_INT_LBRTD 7 /* Local-Bus Ready Timer Interrupt */ +#define NILE4_INT_INTA 8 /* PCI Interrupt Signal INTA# */ +#define NILE4_INT_INTB 9 /* PCI Interrupt Signal INTB# */ +#define NILE4_INT_INTC 10 /* PCI Interrupt Signal INTC# */ +#define NILE4_INT_INTD 11 /* PCI Interrupt Signal INTD# */ +#define NILE4_INT_INTE 12 /* PCI Interrupt Signal INTE# (ISA cascade) */ +#define NILE4_INT_RESV 13 /* Reserved */ +#define NILE4_INT_PCIS 14 /* PCI SERR# Interrupt */ +#define NILE4_INT_PCIE 15 /* PCI Internal Error Interrupt */ + + + /* + * Nile 4 Register Access + */ + +static inline void nile4_sync(void) +{ + volatile u32 *p = (volatile u32 *)0xbfc00000; + (void)(*p); +} + +static inline void nile4_out32(u32 offset, u32 val) +{ + *(volatile u32 *)(NILE4_BASE+offset) = val; + nile4_sync(); +} + +static inline u32 nile4_in32(u32 offset) +{ + u32 val = *(volatile u32 *)(NILE4_BASE+offset); + nile4_sync(); + return val; +} + +static inline void nile4_out16(u32 offset, u16 val) +{ + *(volatile u16 *)(NILE4_BASE+offset) = val; + nile4_sync(); +} + +static inline u16 nile4_in16(u32 offset) +{ + u16 val = *(volatile u16 *)(NILE4_BASE+offset); + nile4_sync(); + return val; +} + +static inline void nile4_out8(u32 offset, u8 val) +{ + *(volatile u8 *)(NILE4_BASE+offset) = val; + nile4_sync(); +} + +static inline u8 nile4_in8(u32 offset) +{ + u8 val = *(volatile u8 *)(NILE4_BASE+offset); + nile4_sync(); + return val; +} + + + /* + * Physical Device Address Registers + */ + +extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width, + int on_memory_bus, int visible); + + + /* + * PCI Master Registers + */ + +#define NILE4_PCICMD_IACK 0 /* PCI Interrupt Acknowledge */ +#define NILE4_PCICMD_IO 1 /* PCI I/O Space */ +#define NILE4_PCICMD_MEM 3 /* PCI Memory Space */ +#define NILE4_PCICMD_CFG 5 /* PCI Configuration Space */ + + + /* + * PCI Address Spaces + * + * Note that these are multiplexed using PCIINIT[01]! + */ + +#define NILE4_PCI_IO_BASE 0xa6000000 +#define NILE4_PCI_MEM_BASE 0xa8000000 +#define NILE4_PCI_CFG_BASE NILE4_PCI_MEM_BASE +#define NILE4_PCI_IACK_BASE NILE4_PCI_IO_BASE + + +extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr); + + + /* + * Interrupt Programming + */ + +#define NUM_I8259_INTERRUPTS 16 +#define NUM_NILE4_INTERRUPTS 16 + +#define IRQ_I8259_CASCADE NILE4_INT_INTE +#define is_i8259_irq(irq) ((irq) < NUM_I8259_INTERRUPTS) +#define nile4_to_irq(n) ((n)+NUM_I8259_INTERRUPTS) +#define irq_to_nile4(n) ((n)-NUM_I8259_INTERRUPTS) + +extern void nile4_map_irq(int nile4_irq, int cpu_irq); +extern void nile4_map_irq_all(int cpu_irq); +extern void nile4_enable_irq(unsigned int nile4_irq); +extern void nile4_disable_irq(unsigned int nile4_irq); +extern void nile4_disable_irq_all(void); +extern u16 nile4_get_irq_stat(int cpu_irq); +extern void nile4_enable_irq_output(int cpu_irq); +extern void nile4_disable_irq_output(int cpu_irq); +extern void nile4_set_pci_irq_polarity(int pci_irq, int high); +extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level); +extern void nile4_clear_irq(int nile4_irq); +extern void nile4_clear_irq_mask(u32 mask); +extern u8 nile4_i8259_iack(void); +extern void nile4_dump_irq_status(void); /* Debug */ + +#endif + diff --git a/arch/mips/include/asm/paccess.h b/arch/mips/include/asm/paccess.h new file mode 100644 index 000000000000..c2394f8b0fe1 --- /dev/null +++ b/arch/mips/include/asm/paccess.h @@ -0,0 +1,112 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1998, 1999, 2000 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * + * Protected memory access. Used for everything that might take revenge + * by sending a DBE error like accessing possibly non-existant memory or + * devices. + */ +#ifndef _ASM_PACCESS_H +#define _ASM_PACCESS_H + +#include + +#ifdef CONFIG_32BIT +#define __PA_ADDR ".word" +#endif +#ifdef CONFIG_64BIT +#define __PA_ADDR ".dword" +#endif + +extern asmlinkage void handle_ibe(void); +extern asmlinkage void handle_dbe(void); + +#define put_dbe(x, ptr) __put_dbe((x), (ptr), sizeof(*(ptr))) +#define get_dbe(x, ptr) __get_dbe((x), (ptr), sizeof(*(ptr))) + +struct __large_pstruct { unsigned long buf[100]; }; +#define __mp(x) (*(struct __large_pstruct *)(x)) + +#define __get_dbe(x, ptr, size) \ +({ \ + long __gu_err; \ + __typeof__(*(ptr)) __gu_val; \ + unsigned long __gu_addr; \ + __asm__("":"=r" (__gu_val)); \ + __gu_addr = (unsigned long) (ptr); \ + __asm__("":"=r" (__gu_err)); \ + switch (size) { \ + case 1: __get_dbe_asm("lb"); break; \ + case 2: __get_dbe_asm("lh"); break; \ + case 4: __get_dbe_asm("lw"); break; \ + case 8: __get_dbe_asm("ld"); break; \ + default: __get_dbe_unknown(); break; \ + } \ + x = (__typeof__(*(ptr))) __gu_val; \ + __gu_err; \ +}) + +#define __get_dbe_asm(insn) \ +{ \ + __asm__ __volatile__( \ + "1:\t" insn "\t%1,%2\n\t" \ + "move\t%0,$0\n" \ + "2:\n\t" \ + ".section\t.fixup,\"ax\"\n" \ + "3:\tli\t%0,%3\n\t" \ + "move\t%1,$0\n\t" \ + "j\t2b\n\t" \ + ".previous\n\t" \ + ".section\t__dbe_table,\"a\"\n\t" \ + __PA_ADDR "\t1b, 3b\n\t" \ + ".previous" \ + :"=r" (__gu_err), "=r" (__gu_val) \ + :"o" (__mp(__gu_addr)), "i" (-EFAULT)); \ +} + +extern void __get_dbe_unknown(void); + +#define __put_dbe(x, ptr, size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __pu_val; \ + long __pu_addr; \ + __pu_val = (x); \ + __pu_addr = (long) (ptr); \ + __asm__("":"=r" (__pu_err)); \ + switch (size) { \ + case 1: __put_dbe_asm("sb"); break; \ + case 2: __put_dbe_asm("sh"); break; \ + case 4: __put_dbe_asm("sw"); break; \ + case 8: __put_dbe_asm("sd"); break; \ + default: __put_dbe_unknown(); break; \ + } \ + __pu_err; \ +}) + +#define __put_dbe_asm(insn) \ +{ \ + __asm__ __volatile__( \ + "1:\t" insn "\t%1,%2\n\t" \ + "move\t%0,$0\n" \ + "2:\n\t" \ + ".section\t.fixup,\"ax\"\n" \ + "3:\tli\t%0,%3\n\t" \ + "j\t2b\n\t" \ + ".previous\n\t" \ + ".section\t__dbe_table,\"a\"\n\t" \ + __PA_ADDR "\t1b, 3b\n\t" \ + ".previous" \ + : "=r" (__pu_err) \ + : "r" (__pu_val), "o" (__mp(__pu_addr)), "i" (-EFAULT)); \ +} + +extern void __put_dbe_unknown(void); + +extern unsigned long search_dbe_table(unsigned long addr); + +#endif /* _ASM_PACCESS_H */ diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h new file mode 100644 index 000000000000..fe7a88ea066e --- /dev/null +++ b/arch/mips/include/asm/page.h @@ -0,0 +1,191 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_PAGE_H +#define _ASM_PAGE_H + +#include + +/* + * PAGE_SHIFT determines the page size + */ +#ifdef CONFIG_PAGE_SIZE_4KB +#define PAGE_SHIFT 12 +#endif +#ifdef CONFIG_PAGE_SIZE_8KB +#define PAGE_SHIFT 13 +#endif +#ifdef CONFIG_PAGE_SIZE_16KB +#define PAGE_SHIFT 14 +#endif +#ifdef CONFIG_PAGE_SIZE_64KB +#define PAGE_SHIFT 16 +#endif +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) + +#ifndef __ASSEMBLY__ + +#include +#include + +extern void build_clear_page(void); +extern void build_copy_page(void); + +/* + * It's normally defined only for FLATMEM config but it's + * used in our early mem init code for all memory models. + * So always define it. + */ +#define ARCH_PFN_OFFSET PFN_UP(PHYS_OFFSET) + +extern void clear_page(void * page); +extern void copy_page(void * to, void * from); + +extern unsigned long shm_align_mask; + +static inline unsigned long pages_do_alias(unsigned long addr1, + unsigned long addr2) +{ + return (addr1 ^ addr2) & shm_align_mask; +} + +struct page; + +static inline void clear_user_page(void *addr, unsigned long vaddr, + struct page *page) +{ + extern void (*flush_data_cache_page)(unsigned long addr); + + clear_page(addr); + if (pages_do_alias((unsigned long) addr, vaddr & PAGE_MASK)) + flush_data_cache_page((unsigned long)addr); +} + +extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, + struct page *to); +struct vm_area_struct; +extern void copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); + +#define __HAVE_ARCH_COPY_USER_HIGHPAGE + +/* + * These are used to make use of C type-checking.. + */ +#ifdef CONFIG_64BIT_PHYS_ADDR + #ifdef CONFIG_CPU_MIPS32 + typedef struct { unsigned long pte_low, pte_high; } pte_t; + #define pte_val(x) ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) + #define __pte(x) ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) + #else + typedef struct { unsigned long long pte; } pte_t; + #define pte_val(x) ((x).pte) + #define __pte(x) ((pte_t) { (x) } ) + #endif +#else +typedef struct { unsigned long pte; } pte_t; +#define pte_val(x) ((x).pte) +#define __pte(x) ((pte_t) { (x) } ) +#endif +typedef struct page *pgtable_t; + +/* + * For 3-level pagetables we defines these ourselves, for 2-level the + * definitions are supplied by . + */ +#ifdef CONFIG_64BIT + +typedef struct { unsigned long pmd; } pmd_t; +#define pmd_val(x) ((x).pmd) +#define __pmd(x) ((pmd_t) { (x) } ) + +#endif + +/* + * Right now we don't support 4-level pagetables, so all pud-related + * definitions come from . + */ + +/* + * Finall the top of the hierarchy, the pgd + */ +typedef struct { unsigned long pgd; } pgd_t; +#define pgd_val(x) ((x).pgd) +#define __pgd(x) ((pgd_t) { (x) } ) + +/* + * Manipulate page protection bits + */ +typedef struct { unsigned long pgprot; } pgprot_t; +#define pgprot_val(x) ((x).pgprot) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +/* + * On R4000-style MMUs where a TLB entry is mapping a adjacent even / odd + * pair of pages we only have a single global bit per pair of pages. When + * writing to the TLB make sure we always have the bit set for both pages + * or none. This macro is used to access the `buddy' of the pte we're just + * working on. + */ +#define ptep_buddy(x) ((pte_t *)((unsigned long)(x) ^ sizeof(pte_t))) + +#endif /* !__ASSEMBLY__ */ + +/* + * __pa()/__va() should be used only during mem init. + */ +#ifdef CONFIG_64BIT +#define __pa(x) \ +({ \ + unsigned long __x = (unsigned long)(x); \ + __x < CKSEG0 ? XPHYSADDR(__x) : CPHYSADDR(__x); \ +}) +#else +#define __pa(x) \ + ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET) +#endif +#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET)) +#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0)) + +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) + +#ifdef CONFIG_FLATMEM + +#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr) + +#elif defined(CONFIG_SPARSEMEM) + +/* pfn_valid is defined in linux/mmzone.h */ + +#elif defined(CONFIG_NEED_MULTIPLE_NODES) + +#define pfn_valid(pfn) \ +({ \ + unsigned long __pfn = (pfn); \ + int __n = pfn_to_nid(__pfn); \ + ((__n >= 0) ? (__pfn < NODE_DATA(__n)->node_start_pfn + \ + NODE_DATA(__n)->node_spanned_pages) \ + : 0); \ +}) + +#endif + +#define virt_to_page(kaddr) pfn_to_page(PFN_DOWN(virt_to_phys(kaddr))) +#define virt_addr_valid(kaddr) pfn_valid(PFN_DOWN(virt_to_phys(kaddr))) + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE) +#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET) + +#include +#include + +#endif /* _ASM_PAGE_H */ diff --git a/arch/mips/include/asm/param.h b/arch/mips/include/asm/param.h new file mode 100644 index 000000000000..1d9bb8c5ab24 --- /dev/null +++ b/arch/mips/include/asm/param.h @@ -0,0 +1,31 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright 1994 - 2000, 2002 Ralf Baechle (ralf@gnu.org) + * Copyright 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_PARAM_H +#define _ASM_PARAM_H + +#ifdef __KERNEL__ + +# define HZ CONFIG_HZ /* Internal kernel timer frequency */ +# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 65536 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _ASM_PARAM_H */ diff --git a/arch/mips/include/asm/parport.h b/arch/mips/include/asm/parport.h new file mode 100644 index 000000000000..f52656826cce --- /dev/null +++ b/arch/mips/include/asm/parport.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 1999, 2000 Tim Waugh + * + * This file should only be included by drivers/parport/parport_pc.c. + */ +#ifndef _ASM_PARPORT_H +#define _ASM_PARPORT_H + +static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma); +static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma) +{ + return parport_pc_find_isa_ports(autoirq, autodma); +} + +#endif /* _ASM_PARPORT_H */ diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h new file mode 100644 index 000000000000..5510c53b7feb --- /dev/null +++ b/arch/mips/include/asm/pci.h @@ -0,0 +1,179 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef _ASM_PCI_H +#define _ASM_PCI_H + +#include + +#ifdef __KERNEL__ + +/* + * This file essentially defines the interface between board + * specific PCI code and MIPS common PCI code. Should potentially put + * into include/asm/pci.h file. + */ + +#include + +/* + * Each pci channel is a top-level PCI bus seem by CPU. A machine with + * multiple PCI channels may have multiple PCI host controllers or a + * single controller supporting multiple channels. + */ +struct pci_controller { + struct pci_controller *next; + struct pci_bus *bus; + + struct pci_ops *pci_ops; + struct resource *mem_resource; + unsigned long mem_offset; + struct resource *io_resource; + unsigned long io_offset; + unsigned long io_map_base; + + unsigned int index; + /* For compatibility with current (as of July 2003) pciutils + and XFree86. Eventually will be removed. */ + unsigned int need_domain_info; + + int iommu; + + /* Optional access methods for reading/writing the bus number + of the PCI controller */ + int (*get_busno)(void); + void (*set_busno)(int busno); +}; + +/* + * Used by boards to register their PCI busses before the actual scanning. + */ +extern struct pci_controller * alloc_pci_controller(void); +extern void register_pci_controller(struct pci_controller *hose); + +/* + * board supplied pci irq fixup routine + */ +extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + + +/* Can be used to override the logic in pci_scan_bus for skipping + already-configured bus numbers - to be used for buggy BIOSes + or architectures with incomplete PCI setup by the loader */ + +extern unsigned int pcibios_assign_all_busses(void); + +#define pcibios_scan_all_fns(a, b) 0 + +extern unsigned long PCIBIOS_MIN_IO; +extern unsigned long PCIBIOS_MIN_MEM; + +#define PCIBIOS_MIN_CARDBUS_IO 0x4000 + +extern void pcibios_set_master(struct pci_dev *dev); + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +/* + * Dynamic DMA mapping stuff. + * MIPS has everything mapped statically. + */ + +#include +#include +#include +#include +#include + +struct pci_dev; + +/* + * The PCI address space does equal the physical memory address space. The + * networking and block device layers use this boolean for bounce buffer + * decisions. This is set if any hose does not have an IOMMU. + */ +extern unsigned int PCI_DMA_BUS_IS_PHYS; + +#ifdef CONFIG_DMA_NEED_PCI_MAP_STATE + +/* pci_unmap_{single,page} is not a nop, thus... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) + +#else /* CONFIG_DMA_NEED_PCI_MAP_STATE */ + +/* pci_unmap_{page,single} is a nop so... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) + +#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE */ + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +extern void pcibios_resource_to_bus(struct pci_dev *dev, + struct pci_bus_region *region, struct resource *res); + +extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); + +static inline struct resource * +pcibios_select_root(struct pci_dev *pdev, struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + + return root; +} + +#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index + +static inline int pci_proc_domain(struct pci_bus *bus) +{ + struct pci_controller *hose = bus->sysdata; + return hose->need_domain_info; +} + +#endif /* __KERNEL__ */ + +/* implement the pci_ DMA API in terms of the generic device dma_ one */ +#include + +/* Do platform specific device initialization at pci_enable_device() time */ +extern int pcibios_plat_dev_init(struct pci_dev *dev); + +/* Chances are this interrupt is wired PC-style ... */ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return channel ? 15 : 14; +} + +extern int pci_probe_only; + +extern char * (*pcibios_plat_setup)(char *str); + +#endif /* _ASM_PCI_H */ diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h new file mode 100644 index 000000000000..5f4b9d4e4114 --- /dev/null +++ b/arch/mips/include/asm/pci/bridge.h @@ -0,0 +1,854 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * bridge.h - bridge chip header file, derived from IRIX , + * revision 1.76. + * + * Copyright (C) 1996, 1999 Silcon Graphics, Inc. + * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_PCI_BRIDGE_H +#define _ASM_PCI_BRIDGE_H + +#include +#include +#include /* generic widget header */ +#include + +/* I/O page size */ + +#define IOPFNSHIFT 12 /* 4K per mapped page */ + +#define IOPGSIZE (1 << IOPFNSHIFT) +#define IOPG(x) ((x) >> IOPFNSHIFT) +#define IOPGOFF(x) ((x) & (IOPGSIZE-1)) + +/* Bridge RAM sizes */ + +#define BRIDGE_ATE_RAM_SIZE 0x00000400 /* 1kB ATE RAM */ + +#define BRIDGE_CONFIG_BASE 0x20000 +#define BRIDGE_CONFIG1_BASE 0x28000 +#define BRIDGE_CONFIG_END 0x30000 +#define BRIDGE_CONFIG_SLOT_SIZE 0x1000 + +#define BRIDGE_SSRAM_512K 0x00080000 /* 512kB */ +#define BRIDGE_SSRAM_128K 0x00020000 /* 128kB */ +#define BRIDGE_SSRAM_64K 0x00010000 /* 64kB */ +#define BRIDGE_SSRAM_0K 0x00000000 /* 0kB */ + +/* ======================================================================== + * Bridge address map + */ + +#ifndef __ASSEMBLY__ + +/* + * All accesses to bridge hardware registers must be done + * using 32-bit loads and stores. + */ +typedef u32 bridgereg_t; + +typedef u64 bridge_ate_t; + +/* pointers to bridge ATEs + * are always "pointer to volatile" + */ +typedef volatile bridge_ate_t *bridge_ate_p; + +/* + * It is generally preferred that hardware registers on the bridge + * are located from C code via this structure. + * + * Generated from Bridge spec dated 04oct95 + */ + +typedef volatile struct bridge_s { + /* Local Registers 0x000000-0x00FFFF */ + + /* standard widget configuration 0x000000-0x000057 */ + widget_cfg_t b_widget; /* 0x000000 */ + + /* helper fieldnames for accessing bridge widget */ + +#define b_wid_id b_widget.w_id +#define b_wid_stat b_widget.w_status +#define b_wid_err_upper b_widget.w_err_upper_addr +#define b_wid_err_lower b_widget.w_err_lower_addr +#define b_wid_control b_widget.w_control +#define b_wid_req_timeout b_widget.w_req_timeout +#define b_wid_int_upper b_widget.w_intdest_upper_addr +#define b_wid_int_lower b_widget.w_intdest_lower_addr +#define b_wid_err_cmdword b_widget.w_err_cmd_word +#define b_wid_llp b_widget.w_llp_cfg +#define b_wid_tflush b_widget.w_tflush + + /* bridge-specific widget configuration 0x000058-0x00007F */ + bridgereg_t _pad_000058; + bridgereg_t b_wid_aux_err; /* 0x00005C */ + bridgereg_t _pad_000060; + bridgereg_t b_wid_resp_upper; /* 0x000064 */ + bridgereg_t _pad_000068; + bridgereg_t b_wid_resp_lower; /* 0x00006C */ + bridgereg_t _pad_000070; + bridgereg_t b_wid_tst_pin_ctrl; /* 0x000074 */ + bridgereg_t _pad_000078[2]; + + /* PMU & Map 0x000080-0x00008F */ + bridgereg_t _pad_000080; + bridgereg_t b_dir_map; /* 0x000084 */ + bridgereg_t _pad_000088[2]; + + /* SSRAM 0x000090-0x00009F */ + bridgereg_t _pad_000090; + bridgereg_t b_ram_perr; /* 0x000094 */ + bridgereg_t _pad_000098[2]; + + /* Arbitration 0x0000A0-0x0000AF */ + bridgereg_t _pad_0000A0; + bridgereg_t b_arb; /* 0x0000A4 */ + bridgereg_t _pad_0000A8[2]; + + /* Number In A Can 0x0000B0-0x0000BF */ + bridgereg_t _pad_0000B0; + bridgereg_t b_nic; /* 0x0000B4 */ + bridgereg_t _pad_0000B8[2]; + + /* PCI/GIO 0x0000C0-0x0000FF */ + bridgereg_t _pad_0000C0; + bridgereg_t b_bus_timeout; /* 0x0000C4 */ +#define b_pci_bus_timeout b_bus_timeout + + bridgereg_t _pad_0000C8; + bridgereg_t b_pci_cfg; /* 0x0000CC */ + bridgereg_t _pad_0000D0; + bridgereg_t b_pci_err_upper; /* 0x0000D4 */ + bridgereg_t _pad_0000D8; + bridgereg_t b_pci_err_lower; /* 0x0000DC */ + bridgereg_t _pad_0000E0[8]; +#define b_gio_err_lower b_pci_err_lower +#define b_gio_err_upper b_pci_err_upper + + /* Interrupt 0x000100-0x0001FF */ + bridgereg_t _pad_000100; + bridgereg_t b_int_status; /* 0x000104 */ + bridgereg_t _pad_000108; + bridgereg_t b_int_enable; /* 0x00010C */ + bridgereg_t _pad_000110; + bridgereg_t b_int_rst_stat; /* 0x000114 */ + bridgereg_t _pad_000118; + bridgereg_t b_int_mode; /* 0x00011C */ + bridgereg_t _pad_000120; + bridgereg_t b_int_device; /* 0x000124 */ + bridgereg_t _pad_000128; + bridgereg_t b_int_host_err; /* 0x00012C */ + + struct { + bridgereg_t __pad; /* 0x0001{30,,,68} */ + bridgereg_t addr; /* 0x0001{34,,,6C} */ + } b_int_addr[8]; /* 0x000130 */ + + bridgereg_t _pad_000170[36]; + + /* Device 0x000200-0x0003FF */ + struct { + bridgereg_t __pad; /* 0x0002{00,,,38} */ + bridgereg_t reg; /* 0x0002{04,,,3C} */ + } b_device[8]; /* 0x000200 */ + + struct { + bridgereg_t __pad; /* 0x0002{40,,,78} */ + bridgereg_t reg; /* 0x0002{44,,,7C} */ + } b_wr_req_buf[8]; /* 0x000240 */ + + struct { + bridgereg_t __pad; /* 0x0002{80,,,88} */ + bridgereg_t reg; /* 0x0002{84,,,8C} */ + } b_rrb_map[2]; /* 0x000280 */ +#define b_even_resp b_rrb_map[0].reg /* 0x000284 */ +#define b_odd_resp b_rrb_map[1].reg /* 0x00028C */ + + bridgereg_t _pad_000290; + bridgereg_t b_resp_status; /* 0x000294 */ + bridgereg_t _pad_000298; + bridgereg_t b_resp_clear; /* 0x00029C */ + + bridgereg_t _pad_0002A0[24]; + + char _pad_000300[0x10000 - 0x000300]; + + /* Internal Address Translation Entry RAM 0x010000-0x0103FF */ + union { + bridge_ate_t wr; /* write-only */ + struct { + bridgereg_t _p_pad; + bridgereg_t rd; /* read-only */ + } hi; + } b_int_ate_ram[128]; + + char _pad_010400[0x11000 - 0x010400]; + + /* Internal Address Translation Entry RAM LOW 0x011000-0x0113FF */ + struct { + bridgereg_t _p_pad; + bridgereg_t rd; /* read-only */ + } b_int_ate_ram_lo[128]; + + char _pad_011400[0x20000 - 0x011400]; + + /* PCI Device Configuration Spaces 0x020000-0x027FFF */ + union { /* make all access sizes available. */ + u8 c[0x1000 / 1]; + u16 s[0x1000 / 2]; + u32 l[0x1000 / 4]; + u64 d[0x1000 / 8]; + union { + u8 c[0x100 / 1]; + u16 s[0x100 / 2]; + u32 l[0x100 / 4]; + u64 d[0x100 / 8]; + } f[8]; + } b_type0_cfg_dev[8]; /* 0x020000 */ + + /* PCI Type 1 Configuration Space 0x028000-0x028FFF */ + union { /* make all access sizes available. */ + u8 c[0x1000 / 1]; + u16 s[0x1000 / 2]; + u32 l[0x1000 / 4]; + u64 d[0x1000 / 8]; + } b_type1_cfg; /* 0x028000-0x029000 */ + + char _pad_029000[0x007000]; /* 0x029000-0x030000 */ + + /* PCI Interrupt Acknowledge Cycle 0x030000 */ + union { + u8 c[8 / 1]; + u16 s[8 / 2]; + u32 l[8 / 4]; + u64 d[8 / 8]; + } b_pci_iack; /* 0x030000 */ + + u8 _pad_030007[0x04fff8]; /* 0x030008-0x07FFFF */ + + /* External Address Translation Entry RAM 0x080000-0x0FFFFF */ + bridge_ate_t b_ext_ate_ram[0x10000]; + + /* Reserved 0x100000-0x1FFFFF */ + char _pad_100000[0x200000-0x100000]; + + /* PCI/GIO Device Spaces 0x200000-0xBFFFFF */ + union { /* make all access sizes available. */ + u8 c[0x100000 / 1]; + u16 s[0x100000 / 2]; + u32 l[0x100000 / 4]; + u64 d[0x100000 / 8]; + } b_devio_raw[10]; /* 0x200000 */ + + /* b_devio macro is a bit strange; it reflects the + * fact that the Bridge ASIC provides 2M for the + * first two DevIO windows and 1M for the other six. + */ +#define b_devio(n) b_devio_raw[((n)<2)?(n*2):(n+2)] + + /* External Flash Proms 1,0 0xC00000-0xFFFFFF */ + union { /* make all access sizes available. */ + u8 c[0x400000 / 1]; /* read-only */ + u16 s[0x400000 / 2]; /* read-write */ + u32 l[0x400000 / 4]; /* read-only */ + u64 d[0x400000 / 8]; /* read-only */ + } b_external_flash; /* 0xC00000 */ +} bridge_t; + +/* + * Field formats for Error Command Word and Auxillary Error Command Word + * of bridge. + */ +typedef struct bridge_err_cmdword_s { + union { + u32 cmd_word; + struct { + u32 didn:4, /* Destination ID */ + sidn:4, /* Source ID */ + pactyp:4, /* Packet type */ + tnum:5, /* Trans Number */ + coh:1, /* Coh Transacti */ + ds:2, /* Data size */ + gbr:1, /* GBR enable */ + vbpm:1, /* VBPM message */ + error:1, /* Error occurred */ + barr:1, /* Barrier op */ + rsvd:8; + } berr_st; + } berr_un; +} bridge_err_cmdword_t; + +#define berr_field berr_un.berr_st +#endif /* !__ASSEMBLY__ */ + +/* + * The values of these macros can and should be crosschecked + * regularly against the offsets of the like-named fields + * within the "bridge_t" structure above. + */ + +/* Byte offset macros for Bridge internal registers */ + +#define BRIDGE_WID_ID WIDGET_ID +#define BRIDGE_WID_STAT WIDGET_STATUS +#define BRIDGE_WID_ERR_UPPER WIDGET_ERR_UPPER_ADDR +#define BRIDGE_WID_ERR_LOWER WIDGET_ERR_LOWER_ADDR +#define BRIDGE_WID_CONTROL WIDGET_CONTROL +#define BRIDGE_WID_REQ_TIMEOUT WIDGET_REQ_TIMEOUT +#define BRIDGE_WID_INT_UPPER WIDGET_INTDEST_UPPER_ADDR +#define BRIDGE_WID_INT_LOWER WIDGET_INTDEST_LOWER_ADDR +#define BRIDGE_WID_ERR_CMDWORD WIDGET_ERR_CMD_WORD +#define BRIDGE_WID_LLP WIDGET_LLP_CFG +#define BRIDGE_WID_TFLUSH WIDGET_TFLUSH + +#define BRIDGE_WID_AUX_ERR 0x00005C /* Aux Error Command Word */ +#define BRIDGE_WID_RESP_UPPER 0x000064 /* Response Buf Upper Addr */ +#define BRIDGE_WID_RESP_LOWER 0x00006C /* Response Buf Lower Addr */ +#define BRIDGE_WID_TST_PIN_CTRL 0x000074 /* Test pin control */ + +#define BRIDGE_DIR_MAP 0x000084 /* Direct Map reg */ + +#define BRIDGE_RAM_PERR 0x000094 /* SSRAM Parity Error */ + +#define BRIDGE_ARB 0x0000A4 /* Arbitration Priority reg */ + +#define BRIDGE_NIC 0x0000B4 /* Number In A Can */ + +#define BRIDGE_BUS_TIMEOUT 0x0000C4 /* Bus Timeout Register */ +#define BRIDGE_PCI_BUS_TIMEOUT BRIDGE_BUS_TIMEOUT +#define BRIDGE_PCI_CFG 0x0000CC /* PCI Type 1 Config reg */ +#define BRIDGE_PCI_ERR_UPPER 0x0000D4 /* PCI error Upper Addr */ +#define BRIDGE_PCI_ERR_LOWER 0x0000DC /* PCI error Lower Addr */ + +#define BRIDGE_INT_STATUS 0x000104 /* Interrupt Status */ +#define BRIDGE_INT_ENABLE 0x00010C /* Interrupt Enables */ +#define BRIDGE_INT_RST_STAT 0x000114 /* Reset Intr Status */ +#define BRIDGE_INT_MODE 0x00011C /* Interrupt Mode */ +#define BRIDGE_INT_DEVICE 0x000124 /* Interrupt Device */ +#define BRIDGE_INT_HOST_ERR 0x00012C /* Host Error Field */ + +#define BRIDGE_INT_ADDR0 0x000134 /* Host Address Reg */ +#define BRIDGE_INT_ADDR_OFF 0x000008 /* Host Addr offset (1..7) */ +#define BRIDGE_INT_ADDR(x) (BRIDGE_INT_ADDR0+(x)*BRIDGE_INT_ADDR_OFF) + +#define BRIDGE_DEVICE0 0x000204 /* Device 0 */ +#define BRIDGE_DEVICE_OFF 0x000008 /* Device offset (1..7) */ +#define BRIDGE_DEVICE(x) (BRIDGE_DEVICE0+(x)*BRIDGE_DEVICE_OFF) + +#define BRIDGE_WR_REQ_BUF0 0x000244 /* Write Request Buffer 0 */ +#define BRIDGE_WR_REQ_BUF_OFF 0x000008 /* Buffer Offset (1..7) */ +#define BRIDGE_WR_REQ_BUF(x) (BRIDGE_WR_REQ_BUF0+(x)*BRIDGE_WR_REQ_BUF_OFF) + +#define BRIDGE_EVEN_RESP 0x000284 /* Even Device Response Buf */ +#define BRIDGE_ODD_RESP 0x00028C /* Odd Device Response Buf */ + +#define BRIDGE_RESP_STATUS 0x000294 /* Read Response Status reg */ +#define BRIDGE_RESP_CLEAR 0x00029C /* Read Response Clear reg */ + +/* Byte offset macros for Bridge I/O space */ + +#define BRIDGE_ATE_RAM 0x00010000 /* Internal Addr Xlat Ram */ + +#define BRIDGE_TYPE0_CFG_DEV0 0x00020000 /* Type 0 Cfg, Device 0 */ +#define BRIDGE_TYPE0_CFG_SLOT_OFF 0x00001000 /* Type 0 Cfg Slot Offset (1..7) */ +#define BRIDGE_TYPE0_CFG_FUNC_OFF 0x00000100 /* Type 0 Cfg Func Offset (1..7) */ +#define BRIDGE_TYPE0_CFG_DEV(s) (BRIDGE_TYPE0_CFG_DEV0+\ + (s)*BRIDGE_TYPE0_CFG_SLOT_OFF) +#define BRIDGE_TYPE0_CFG_DEVF(s, f) (BRIDGE_TYPE0_CFG_DEV0+\ + (s)*BRIDGE_TYPE0_CFG_SLOT_OFF+\ + (f)*BRIDGE_TYPE0_CFG_FUNC_OFF) + +#define BRIDGE_TYPE1_CFG 0x00028000 /* Type 1 Cfg space */ + +#define BRIDGE_PCI_IACK 0x00030000 /* PCI Interrupt Ack */ +#define BRIDGE_EXT_SSRAM 0x00080000 /* Extern SSRAM (ATE) */ + +/* Byte offset macros for Bridge device IO spaces */ + +#define BRIDGE_DEV_CNT 8 /* Up to 8 devices per bridge */ +#define BRIDGE_DEVIO0 0x00200000 /* Device IO 0 Addr */ +#define BRIDGE_DEVIO1 0x00400000 /* Device IO 1 Addr */ +#define BRIDGE_DEVIO2 0x00600000 /* Device IO 2 Addr */ +#define BRIDGE_DEVIO_OFF 0x00100000 /* Device IO Offset (3..7) */ + +#define BRIDGE_DEVIO_2MB 0x00200000 /* Device IO Offset (0..1) */ +#define BRIDGE_DEVIO_1MB 0x00100000 /* Device IO Offset (2..7) */ + +#define BRIDGE_DEVIO(x) ((x)<=1 ? BRIDGE_DEVIO0+(x)*BRIDGE_DEVIO_2MB : BRIDGE_DEVIO2+((x)-2)*BRIDGE_DEVIO_1MB) + +#define BRIDGE_EXTERNAL_FLASH 0x00C00000 /* External Flash PROMS */ + +/* ======================================================================== + * Bridge register bit field definitions + */ + +/* Widget part number of bridge */ +#define BRIDGE_WIDGET_PART_NUM 0xc002 +#define XBRIDGE_WIDGET_PART_NUM 0xd002 + +/* Manufacturer of bridge */ +#define BRIDGE_WIDGET_MFGR_NUM 0x036 +#define XBRIDGE_WIDGET_MFGR_NUM 0x024 + +/* Revision numbers for known Bridge revisions */ +#define BRIDGE_REV_A 0x1 +#define BRIDGE_REV_B 0x2 +#define BRIDGE_REV_C 0x3 +#define BRIDGE_REV_D 0x4 + +/* Bridge widget status register bits definition */ + +#define BRIDGE_STAT_LLP_REC_CNT (0xFFu << 24) +#define BRIDGE_STAT_LLP_TX_CNT (0xFF << 16) +#define BRIDGE_STAT_FLASH_SELECT (0x1 << 6) +#define BRIDGE_STAT_PCI_GIO_N (0x1 << 5) +#define BRIDGE_STAT_PENDING (0x1F << 0) + +/* Bridge widget control register bits definition */ +#define BRIDGE_CTRL_FLASH_WR_EN (0x1ul << 31) +#define BRIDGE_CTRL_EN_CLK50 (0x1 << 30) +#define BRIDGE_CTRL_EN_CLK40 (0x1 << 29) +#define BRIDGE_CTRL_EN_CLK33 (0x1 << 28) +#define BRIDGE_CTRL_RST(n) ((n) << 24) +#define BRIDGE_CTRL_RST_MASK (BRIDGE_CTRL_RST(0xF)) +#define BRIDGE_CTRL_RST_PIN(x) (BRIDGE_CTRL_RST(0x1 << (x))) +#define BRIDGE_CTRL_IO_SWAP (0x1 << 23) +#define BRIDGE_CTRL_MEM_SWAP (0x1 << 22) +#define BRIDGE_CTRL_PAGE_SIZE (0x1 << 21) +#define BRIDGE_CTRL_SS_PAR_BAD (0x1 << 20) +#define BRIDGE_CTRL_SS_PAR_EN (0x1 << 19) +#define BRIDGE_CTRL_SSRAM_SIZE(n) ((n) << 17) +#define BRIDGE_CTRL_SSRAM_SIZE_MASK (BRIDGE_CTRL_SSRAM_SIZE(0x3)) +#define BRIDGE_CTRL_SSRAM_512K (BRIDGE_CTRL_SSRAM_SIZE(0x3)) +#define BRIDGE_CTRL_SSRAM_128K (BRIDGE_CTRL_SSRAM_SIZE(0x2)) +#define BRIDGE_CTRL_SSRAM_64K (BRIDGE_CTRL_SSRAM_SIZE(0x1)) +#define BRIDGE_CTRL_SSRAM_1K (BRIDGE_CTRL_SSRAM_SIZE(0x0)) +#define BRIDGE_CTRL_F_BAD_PKT (0x1 << 16) +#define BRIDGE_CTRL_LLP_XBAR_CRD(n) ((n) << 12) +#define BRIDGE_CTRL_LLP_XBAR_CRD_MASK (BRIDGE_CTRL_LLP_XBAR_CRD(0xf)) +#define BRIDGE_CTRL_CLR_RLLP_CNT (0x1 << 11) +#define BRIDGE_CTRL_CLR_TLLP_CNT (0x1 << 10) +#define BRIDGE_CTRL_SYS_END (0x1 << 9) +#define BRIDGE_CTRL_MAX_TRANS(n) ((n) << 4) +#define BRIDGE_CTRL_MAX_TRANS_MASK (BRIDGE_CTRL_MAX_TRANS(0x1f)) +#define BRIDGE_CTRL_WIDGET_ID(n) ((n) << 0) +#define BRIDGE_CTRL_WIDGET_ID_MASK (BRIDGE_CTRL_WIDGET_ID(0xf)) + +/* Bridge Response buffer Error Upper Register bit fields definition */ +#define BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT (20) +#define BRIDGE_RESP_ERRUPPR_DEVNUM_MASK (0x7 << BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT) +#define BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT (16) +#define BRIDGE_RESP_ERRUPPR_BUFNUM_MASK (0xF << BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT) +#define BRIDGE_RESP_ERRRUPPR_BUFMASK (0xFFFF) + +#define BRIDGE_RESP_ERRUPPR_BUFNUM(x) \ + (((x) & BRIDGE_RESP_ERRUPPR_BUFNUM_MASK) >> \ + BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT) + +#define BRIDGE_RESP_ERRUPPR_DEVICE(x) \ + (((x) & BRIDGE_RESP_ERRUPPR_DEVNUM_MASK) >> \ + BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT) + +/* Bridge direct mapping register bits definition */ +#define BRIDGE_DIRMAP_W_ID_SHFT 20 +#define BRIDGE_DIRMAP_W_ID (0xf << BRIDGE_DIRMAP_W_ID_SHFT) +#define BRIDGE_DIRMAP_RMF_64 (0x1 << 18) +#define BRIDGE_DIRMAP_ADD512 (0x1 << 17) +#define BRIDGE_DIRMAP_OFF (0x1ffff << 0) +#define BRIDGE_DIRMAP_OFF_ADDRSHFT (31) /* lsbit of DIRMAP_OFF is xtalk address bit 31 */ + +/* Bridge Arbitration register bits definition */ +#define BRIDGE_ARB_REQ_WAIT_TICK(x) ((x) << 16) +#define BRIDGE_ARB_REQ_WAIT_TICK_MASK BRIDGE_ARB_REQ_WAIT_TICK(0x3) +#define BRIDGE_ARB_REQ_WAIT_EN(x) ((x) << 8) +#define BRIDGE_ARB_REQ_WAIT_EN_MASK BRIDGE_ARB_REQ_WAIT_EN(0xff) +#define BRIDGE_ARB_FREEZE_GNT (1 << 6) +#define BRIDGE_ARB_HPRI_RING_B2 (1 << 5) +#define BRIDGE_ARB_HPRI_RING_B1 (1 << 4) +#define BRIDGE_ARB_HPRI_RING_B0 (1 << 3) +#define BRIDGE_ARB_LPRI_RING_B2 (1 << 2) +#define BRIDGE_ARB_LPRI_RING_B1 (1 << 1) +#define BRIDGE_ARB_LPRI_RING_B0 (1 << 0) + +/* Bridge Bus time-out register bits definition */ +#define BRIDGE_BUS_PCI_RETRY_HLD(x) ((x) << 16) +#define BRIDGE_BUS_PCI_RETRY_HLD_MASK BRIDGE_BUS_PCI_RETRY_HLD(0x1f) +#define BRIDGE_BUS_GIO_TIMEOUT (1 << 12) +#define BRIDGE_BUS_PCI_RETRY_CNT(x) ((x) << 0) +#define BRIDGE_BUS_PCI_RETRY_MASK BRIDGE_BUS_PCI_RETRY_CNT(0x3ff) + +/* Bridge interrupt status register bits definition */ +#define BRIDGE_ISR_MULTI_ERR (0x1u << 31) +#define BRIDGE_ISR_PMU_ESIZE_FAULT (0x1 << 30) +#define BRIDGE_ISR_UNEXP_RESP (0x1 << 29) +#define BRIDGE_ISR_BAD_XRESP_PKT (0x1 << 28) +#define BRIDGE_ISR_BAD_XREQ_PKT (0x1 << 27) +#define BRIDGE_ISR_RESP_XTLK_ERR (0x1 << 26) +#define BRIDGE_ISR_REQ_XTLK_ERR (0x1 << 25) +#define BRIDGE_ISR_INVLD_ADDR (0x1 << 24) +#define BRIDGE_ISR_UNSUPPORTED_XOP (0x1 << 23) +#define BRIDGE_ISR_XREQ_FIFO_OFLOW (0x1 << 22) +#define BRIDGE_ISR_LLP_REC_SNERR (0x1 << 21) +#define BRIDGE_ISR_LLP_REC_CBERR (0x1 << 20) +#define BRIDGE_ISR_LLP_RCTY (0x1 << 19) +#define BRIDGE_ISR_LLP_TX_RETRY (0x1 << 18) +#define BRIDGE_ISR_LLP_TCTY (0x1 << 17) +#define BRIDGE_ISR_SSRAM_PERR (0x1 << 16) +#define BRIDGE_ISR_PCI_ABORT (0x1 << 15) +#define BRIDGE_ISR_PCI_PARITY (0x1 << 14) +#define BRIDGE_ISR_PCI_SERR (0x1 << 13) +#define BRIDGE_ISR_PCI_PERR (0x1 << 12) +#define BRIDGE_ISR_PCI_MST_TIMEOUT (0x1 << 11) +#define BRIDGE_ISR_GIO_MST_TIMEOUT BRIDGE_ISR_PCI_MST_TIMEOUT +#define BRIDGE_ISR_PCI_RETRY_CNT (0x1 << 10) +#define BRIDGE_ISR_XREAD_REQ_TIMEOUT (0x1 << 9) +#define BRIDGE_ISR_GIO_B_ENBL_ERR (0x1 << 8) +#define BRIDGE_ISR_INT_MSK (0xff << 0) +#define BRIDGE_ISR_INT(x) (0x1 << (x)) + +#define BRIDGE_ISR_LINK_ERROR \ + (BRIDGE_ISR_LLP_REC_SNERR|BRIDGE_ISR_LLP_REC_CBERR| \ + BRIDGE_ISR_LLP_RCTY|BRIDGE_ISR_LLP_TX_RETRY| \ + BRIDGE_ISR_LLP_TCTY) + +#define BRIDGE_ISR_PCIBUS_PIOERR \ + (BRIDGE_ISR_PCI_MST_TIMEOUT|BRIDGE_ISR_PCI_ABORT) + +#define BRIDGE_ISR_PCIBUS_ERROR \ + (BRIDGE_ISR_PCIBUS_PIOERR|BRIDGE_ISR_PCI_PERR| \ + BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_RETRY_CNT| \ + BRIDGE_ISR_PCI_PARITY) + +#define BRIDGE_ISR_XTALK_ERROR \ + (BRIDGE_ISR_XREAD_REQ_TIMEOUT|BRIDGE_ISR_XREQ_FIFO_OFLOW|\ + BRIDGE_ISR_UNSUPPORTED_XOP|BRIDGE_ISR_INVLD_ADDR| \ + BRIDGE_ISR_REQ_XTLK_ERR|BRIDGE_ISR_RESP_XTLK_ERR| \ + BRIDGE_ISR_BAD_XREQ_PKT|BRIDGE_ISR_BAD_XRESP_PKT| \ + BRIDGE_ISR_UNEXP_RESP) + +#define BRIDGE_ISR_ERRORS \ + (BRIDGE_ISR_LINK_ERROR|BRIDGE_ISR_PCIBUS_ERROR| \ + BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR| \ + BRIDGE_ISR_PMU_ESIZE_FAULT) + +/* + * List of Errors which are fatal and kill the system + */ +#define BRIDGE_ISR_ERROR_FATAL \ + ((BRIDGE_ISR_XTALK_ERROR & ~BRIDGE_ISR_XREAD_REQ_TIMEOUT)|\ + BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_PARITY ) + +#define BRIDGE_ISR_ERROR_DUMP \ + (BRIDGE_ISR_PCIBUS_ERROR|BRIDGE_ISR_PMU_ESIZE_FAULT| \ + BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR) + +/* Bridge interrupt enable register bits definition */ +#define BRIDGE_IMR_UNEXP_RESP BRIDGE_ISR_UNEXP_RESP +#define BRIDGE_IMR_PMU_ESIZE_FAULT BRIDGE_ISR_PMU_ESIZE_FAULT +#define BRIDGE_IMR_BAD_XRESP_PKT BRIDGE_ISR_BAD_XRESP_PKT +#define BRIDGE_IMR_BAD_XREQ_PKT BRIDGE_ISR_BAD_XREQ_PKT +#define BRIDGE_IMR_RESP_XTLK_ERR BRIDGE_ISR_RESP_XTLK_ERR +#define BRIDGE_IMR_REQ_XTLK_ERR BRIDGE_ISR_REQ_XTLK_ERR +#define BRIDGE_IMR_INVLD_ADDR BRIDGE_ISR_INVLD_ADDR +#define BRIDGE_IMR_UNSUPPORTED_XOP BRIDGE_ISR_UNSUPPORTED_XOP +#define BRIDGE_IMR_XREQ_FIFO_OFLOW BRIDGE_ISR_XREQ_FIFO_OFLOW +#define BRIDGE_IMR_LLP_REC_SNERR BRIDGE_ISR_LLP_REC_SNERR +#define BRIDGE_IMR_LLP_REC_CBERR BRIDGE_ISR_LLP_REC_CBERR +#define BRIDGE_IMR_LLP_RCTY BRIDGE_ISR_LLP_RCTY +#define BRIDGE_IMR_LLP_TX_RETRY BRIDGE_ISR_LLP_TX_RETRY +#define BRIDGE_IMR_LLP_TCTY BRIDGE_ISR_LLP_TCTY +#define BRIDGE_IMR_SSRAM_PERR BRIDGE_ISR_SSRAM_PERR +#define BRIDGE_IMR_PCI_ABORT BRIDGE_ISR_PCI_ABORT +#define BRIDGE_IMR_PCI_PARITY BRIDGE_ISR_PCI_PARITY +#define BRIDGE_IMR_PCI_SERR BRIDGE_ISR_PCI_SERR +#define BRIDGE_IMR_PCI_PERR BRIDGE_ISR_PCI_PERR +#define BRIDGE_IMR_PCI_MST_TIMEOUT BRIDGE_ISR_PCI_MST_TIMEOUT +#define BRIDGE_IMR_GIO_MST_TIMEOUT BRIDGE_ISR_GIO_MST_TIMEOUT +#define BRIDGE_IMR_PCI_RETRY_CNT BRIDGE_ISR_PCI_RETRY_CNT +#define BRIDGE_IMR_XREAD_REQ_TIMEOUT BRIDGE_ISR_XREAD_REQ_TIMEOUT +#define BRIDGE_IMR_GIO_B_ENBL_ERR BRIDGE_ISR_GIO_B_ENBL_ERR +#define BRIDGE_IMR_INT_MSK BRIDGE_ISR_INT_MSK +#define BRIDGE_IMR_INT(x) BRIDGE_ISR_INT(x) + +/* Bridge interrupt reset register bits definition */ +#define BRIDGE_IRR_MULTI_CLR (0x1 << 6) +#define BRIDGE_IRR_CRP_GRP_CLR (0x1 << 5) +#define BRIDGE_IRR_RESP_BUF_GRP_CLR (0x1 << 4) +#define BRIDGE_IRR_REQ_DSP_GRP_CLR (0x1 << 3) +#define BRIDGE_IRR_LLP_GRP_CLR (0x1 << 2) +#define BRIDGE_IRR_SSRAM_GRP_CLR (0x1 << 1) +#define BRIDGE_IRR_PCI_GRP_CLR (0x1 << 0) +#define BRIDGE_IRR_GIO_GRP_CLR (0x1 << 0) +#define BRIDGE_IRR_ALL_CLR 0x7f + +#define BRIDGE_IRR_CRP_GRP (BRIDGE_ISR_UNEXP_RESP | \ + BRIDGE_ISR_XREQ_FIFO_OFLOW) +#define BRIDGE_IRR_RESP_BUF_GRP (BRIDGE_ISR_BAD_XRESP_PKT | \ + BRIDGE_ISR_RESP_XTLK_ERR | \ + BRIDGE_ISR_XREAD_REQ_TIMEOUT) +#define BRIDGE_IRR_REQ_DSP_GRP (BRIDGE_ISR_UNSUPPORTED_XOP | \ + BRIDGE_ISR_BAD_XREQ_PKT | \ + BRIDGE_ISR_REQ_XTLK_ERR | \ + BRIDGE_ISR_INVLD_ADDR) +#define BRIDGE_IRR_LLP_GRP (BRIDGE_ISR_LLP_REC_SNERR | \ + BRIDGE_ISR_LLP_REC_CBERR | \ + BRIDGE_ISR_LLP_RCTY | \ + BRIDGE_ISR_LLP_TX_RETRY | \ + BRIDGE_ISR_LLP_TCTY) +#define BRIDGE_IRR_SSRAM_GRP (BRIDGE_ISR_SSRAM_PERR | \ + BRIDGE_ISR_PMU_ESIZE_FAULT) +#define BRIDGE_IRR_PCI_GRP (BRIDGE_ISR_PCI_ABORT | \ + BRIDGE_ISR_PCI_PARITY | \ + BRIDGE_ISR_PCI_SERR | \ + BRIDGE_ISR_PCI_PERR | \ + BRIDGE_ISR_PCI_MST_TIMEOUT | \ + BRIDGE_ISR_PCI_RETRY_CNT) + +#define BRIDGE_IRR_GIO_GRP (BRIDGE_ISR_GIO_B_ENBL_ERR | \ + BRIDGE_ISR_GIO_MST_TIMEOUT) + +/* Bridge INT_DEV register bits definition */ +#define BRIDGE_INT_DEV_SHFT(n) ((n)*3) +#define BRIDGE_INT_DEV_MASK(n) (0x7 << BRIDGE_INT_DEV_SHFT(n)) +#define BRIDGE_INT_DEV_SET(_dev, _line) (_dev << BRIDGE_INT_DEV_SHFT(_line)) + +/* Bridge interrupt(x) register bits definition */ +#define BRIDGE_INT_ADDR_HOST 0x0003FF00 +#define BRIDGE_INT_ADDR_FLD 0x000000FF + +#define BRIDGE_TMO_PCI_RETRY_HLD_MASK 0x1f0000 +#define BRIDGE_TMO_GIO_TIMEOUT_MASK 0x001000 +#define BRIDGE_TMO_PCI_RETRY_CNT_MASK 0x0003ff + +#define BRIDGE_TMO_PCI_RETRY_CNT_MAX 0x3ff + +/* + * The NASID should be shifted by this amount and stored into the + * interrupt(x) register. + */ +#define BRIDGE_INT_ADDR_NASID_SHFT 8 + +/* + * The BRIDGE_INT_ADDR_DEST_IO bit should be set to send an interrupt to + * memory. + */ +#define BRIDGE_INT_ADDR_DEST_IO (1 << 17) +#define BRIDGE_INT_ADDR_DEST_MEM 0 +#define BRIDGE_INT_ADDR_MASK (1 << 17) + +/* Bridge device(x) register bits definition */ +#define BRIDGE_DEV_ERR_LOCK_EN 0x10000000 +#define BRIDGE_DEV_PAGE_CHK_DIS 0x08000000 +#define BRIDGE_DEV_FORCE_PCI_PAR 0x04000000 +#define BRIDGE_DEV_VIRTUAL_EN 0x02000000 +#define BRIDGE_DEV_PMU_WRGA_EN 0x01000000 +#define BRIDGE_DEV_DIR_WRGA_EN 0x00800000 +#define BRIDGE_DEV_DEV_SIZE 0x00400000 +#define BRIDGE_DEV_RT 0x00200000 +#define BRIDGE_DEV_SWAP_PMU 0x00100000 +#define BRIDGE_DEV_SWAP_DIR 0x00080000 +#define BRIDGE_DEV_PREF 0x00040000 +#define BRIDGE_DEV_PRECISE 0x00020000 +#define BRIDGE_DEV_COH 0x00010000 +#define BRIDGE_DEV_BARRIER 0x00008000 +#define BRIDGE_DEV_GBR 0x00004000 +#define BRIDGE_DEV_DEV_SWAP 0x00002000 +#define BRIDGE_DEV_DEV_IO_MEM 0x00001000 +#define BRIDGE_DEV_OFF_MASK 0x00000fff +#define BRIDGE_DEV_OFF_ADDR_SHFT 20 + +#define BRIDGE_DEV_PMU_BITS (BRIDGE_DEV_PMU_WRGA_EN | \ + BRIDGE_DEV_SWAP_PMU) +#define BRIDGE_DEV_D32_BITS (BRIDGE_DEV_DIR_WRGA_EN | \ + BRIDGE_DEV_SWAP_DIR | \ + BRIDGE_DEV_PREF | \ + BRIDGE_DEV_PRECISE | \ + BRIDGE_DEV_COH | \ + BRIDGE_DEV_BARRIER) +#define BRIDGE_DEV_D64_BITS (BRIDGE_DEV_DIR_WRGA_EN | \ + BRIDGE_DEV_SWAP_DIR | \ + BRIDGE_DEV_COH | \ + BRIDGE_DEV_BARRIER) + +/* Bridge Error Upper register bit field definition */ +#define BRIDGE_ERRUPPR_DEVMASTER (0x1 << 20) /* Device was master */ +#define BRIDGE_ERRUPPR_PCIVDEV (0x1 << 19) /* Virtual Req value */ +#define BRIDGE_ERRUPPR_DEVNUM_SHFT (16) +#define BRIDGE_ERRUPPR_DEVNUM_MASK (0x7 << BRIDGE_ERRUPPR_DEVNUM_SHFT) +#define BRIDGE_ERRUPPR_DEVICE(err) (((err) >> BRIDGE_ERRUPPR_DEVNUM_SHFT) & 0x7) +#define BRIDGE_ERRUPPR_ADDRMASK (0xFFFF) + +/* Bridge interrupt mode register bits definition */ +#define BRIDGE_INTMODE_CLR_PKT_EN(x) (0x1 << (x)) + +/* this should be written to the xbow's link_control(x) register */ +#define BRIDGE_CREDIT 3 + +/* RRB assignment register */ +#define BRIDGE_RRB_EN 0x8 /* after shifting down */ +#define BRIDGE_RRB_DEV 0x7 /* after shifting down */ +#define BRIDGE_RRB_VDEV 0x4 /* after shifting down */ +#define BRIDGE_RRB_PDEV 0x3 /* after shifting down */ + +/* RRB status register */ +#define BRIDGE_RRB_VALID(r) (0x00010000<<(r)) +#define BRIDGE_RRB_INUSE(r) (0x00000001<<(r)) + +/* RRB clear register */ +#define BRIDGE_RRB_CLEAR(r) (0x00000001<<(r)) + +/* xbox system controller declarations */ +#define XBOX_BRIDGE_WID 8 +#define FLASH_PROM1_BASE 0xE00000 /* To read the xbox sysctlr status */ +#define XBOX_RPS_EXISTS 1 << 6 /* RPS bit in status register */ +#define XBOX_RPS_FAIL 1 << 4 /* RPS status bit in register */ + +/* ======================================================================== + */ +/* + * Macros for Xtalk to Bridge bus (PCI/GIO) PIO + * refer to section 4.2.1 of Bridge Spec for xtalk to PCI/GIO PIO mappings + */ +/* XTALK addresses that map into Bridge Bus addr space */ +#define BRIDGE_PIO32_XTALK_ALIAS_BASE 0x000040000000L +#define BRIDGE_PIO32_XTALK_ALIAS_LIMIT 0x00007FFFFFFFL +#define BRIDGE_PIO64_XTALK_ALIAS_BASE 0x000080000000L +#define BRIDGE_PIO64_XTALK_ALIAS_LIMIT 0x0000BFFFFFFFL +#define BRIDGE_PCIIO_XTALK_ALIAS_BASE 0x000100000000L +#define BRIDGE_PCIIO_XTALK_ALIAS_LIMIT 0x0001FFFFFFFFL + +/* Ranges of PCI bus space that can be accessed via PIO from xtalk */ +#define BRIDGE_MIN_PIO_ADDR_MEM 0x00000000 /* 1G PCI memory space */ +#define BRIDGE_MAX_PIO_ADDR_MEM 0x3fffffff +#define BRIDGE_MIN_PIO_ADDR_IO 0x00000000 /* 4G PCI IO space */ +#define BRIDGE_MAX_PIO_ADDR_IO 0xffffffff + +/* XTALK addresses that map into PCI addresses */ +#define BRIDGE_PCI_MEM32_BASE BRIDGE_PIO32_XTALK_ALIAS_BASE +#define BRIDGE_PCI_MEM32_LIMIT BRIDGE_PIO32_XTALK_ALIAS_LIMIT +#define BRIDGE_PCI_MEM64_BASE BRIDGE_PIO64_XTALK_ALIAS_BASE +#define BRIDGE_PCI_MEM64_LIMIT BRIDGE_PIO64_XTALK_ALIAS_LIMIT +#define BRIDGE_PCI_IO_BASE BRIDGE_PCIIO_XTALK_ALIAS_BASE +#define BRIDGE_PCI_IO_LIMIT BRIDGE_PCIIO_XTALK_ALIAS_LIMIT + +/* + * Macros for Bridge bus (PCI/GIO) to Xtalk DMA + */ +/* Bridge Bus DMA addresses */ +#define BRIDGE_LOCAL_BASE 0 +#define BRIDGE_DMA_MAPPED_BASE 0x40000000 +#define BRIDGE_DMA_MAPPED_SIZE 0x40000000 /* 1G Bytes */ +#define BRIDGE_DMA_DIRECT_BASE 0x80000000 +#define BRIDGE_DMA_DIRECT_SIZE 0x80000000 /* 2G Bytes */ + +#define PCI32_LOCAL_BASE BRIDGE_LOCAL_BASE + +/* PCI addresses of regions decoded by Bridge for DMA */ +#define PCI32_MAPPED_BASE BRIDGE_DMA_MAPPED_BASE +#define PCI32_DIRECT_BASE BRIDGE_DMA_DIRECT_BASE + +#define IS_PCI32_LOCAL(x) ((ulong_t)(x) < PCI32_MAPPED_BASE) +#define IS_PCI32_MAPPED(x) ((ulong_t)(x) < PCI32_DIRECT_BASE && \ + (ulong_t)(x) >= PCI32_MAPPED_BASE) +#define IS_PCI32_DIRECT(x) ((ulong_t)(x) >= PCI32_MAPPED_BASE) +#define IS_PCI64(x) ((ulong_t)(x) >= PCI64_BASE) + +/* + * The GIO address space. + */ +/* Xtalk to GIO PIO */ +#define BRIDGE_GIO_MEM32_BASE BRIDGE_PIO32_XTALK_ALIAS_BASE +#define BRIDGE_GIO_MEM32_LIMIT BRIDGE_PIO32_XTALK_ALIAS_LIMIT + +#define GIO_LOCAL_BASE BRIDGE_LOCAL_BASE + +/* GIO addresses of regions decoded by Bridge for DMA */ +#define GIO_MAPPED_BASE BRIDGE_DMA_MAPPED_BASE +#define GIO_DIRECT_BASE BRIDGE_DMA_DIRECT_BASE + +#define IS_GIO_LOCAL(x) ((ulong_t)(x) < GIO_MAPPED_BASE) +#define IS_GIO_MAPPED(x) ((ulong_t)(x) < GIO_DIRECT_BASE && \ + (ulong_t)(x) >= GIO_MAPPED_BASE) +#define IS_GIO_DIRECT(x) ((ulong_t)(x) >= GIO_MAPPED_BASE) + +/* PCI to xtalk mapping */ + +/* given a DIR_OFF value and a pci/gio 32 bits direct address, determine + * which xtalk address is accessed + */ +#define BRIDGE_DIRECT_32_SEG_SIZE BRIDGE_DMA_DIRECT_SIZE +#define BRIDGE_DIRECT_32_TO_XTALK(dir_off,adr) \ + ((dir_off) * BRIDGE_DIRECT_32_SEG_SIZE + \ + ((adr) & (BRIDGE_DIRECT_32_SEG_SIZE - 1)) + PHYS_RAMBASE) + +/* 64-bit address attribute masks */ +#define PCI64_ATTR_TARG_MASK 0xf000000000000000 +#define PCI64_ATTR_TARG_SHFT 60 +#define PCI64_ATTR_PREF 0x0800000000000000 +#define PCI64_ATTR_PREC 0x0400000000000000 +#define PCI64_ATTR_VIRTUAL 0x0200000000000000 +#define PCI64_ATTR_BAR 0x0100000000000000 +#define PCI64_ATTR_RMF_MASK 0x00ff000000000000 +#define PCI64_ATTR_RMF_SHFT 48 + +#ifndef __ASSEMBLY__ +/* Address translation entry for mapped pci32 accesses */ +typedef union ate_u { + u64 ent; + struct ate_s { + u64 rmf:16; + u64 addr:36; + u64 targ:4; + u64 reserved:3; + u64 barrier:1; + u64 prefetch:1; + u64 precise:1; + u64 coherent:1; + u64 valid:1; + } field; +} ate_t; +#endif /* !__ASSEMBLY__ */ + +#define ATE_V 0x01 +#define ATE_CO 0x02 +#define ATE_PREC 0x04 +#define ATE_PREF 0x08 +#define ATE_BAR 0x10 + +#define ATE_PFNSHIFT 12 +#define ATE_TIDSHIFT 8 +#define ATE_RMFSHIFT 48 + +#define mkate(xaddr, xid, attr) ((xaddr) & 0x0000fffffffff000ULL) | \ + ((xid)<sysdata)) + +extern void register_bridge_irq(unsigned int irq); +extern int request_bridge_irq(struct bridge_controller *bc); + +extern struct pci_ops bridge_pci_ops; + +#endif /* _ASM_PCI_BRIDGE_H */ diff --git a/arch/mips/include/asm/percpu.h b/arch/mips/include/asm/percpu.h new file mode 100644 index 000000000000..844e763e9332 --- /dev/null +++ b/arch/mips/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ASM_PERCPU_H +#define __ASM_PERCPU_H + +#include + +#endif /* __ASM_PERCPU_H */ diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h new file mode 100644 index 000000000000..1275831dda29 --- /dev/null +++ b/arch/mips/include/asm/pgalloc.h @@ -0,0 +1,143 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 2001, 2003 by Ralf Baechle + * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_PGALLOC_H +#define _ASM_PGALLOC_H + +#include +#include +#include + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, + pte_t *pte) +{ + set_pmd(pmd, __pmd((unsigned long)pte)); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, + pgtable_t pte) +{ + set_pmd(pmd, __pmd((unsigned long)page_address(pte))); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +/* + * Initialize a new pmd table with invalid pointers. + */ +extern void pmd_init(unsigned long page, unsigned long pagetable); + +#ifdef CONFIG_64BIT + +static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) +{ + set_pud(pud, __pud((unsigned long)pmd)); +} +#endif + +/* + * Initialize a new pgd / pmd table with invalid pointers. + */ +extern void pgd_init(unsigned long page); + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + pgd_t *ret, *init; + + ret = (pgd_t *) __get_free_pages(GFP_KERNEL, PGD_ORDER); + if (ret) { + init = pgd_offset(&init_mm, 0UL); + pgd_init((unsigned long)ret); + memcpy(ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD, + (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); + } + + return ret; +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + free_pages((unsigned long)pgd, PGD_ORDER); +} + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + pte_t *pte; + + pte = (pte_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, PTE_ORDER); + + return pte; +} + +static inline struct page *pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *pte; + + pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER); + if (pte) { + clear_highpage(pte); + pgtable_page_ctor(pte); + } + return pte; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + free_pages((unsigned long)pte, PTE_ORDER); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + __free_pages(pte, PTE_ORDER); +} + +#define __pte_free_tlb(tlb,pte) \ +do { \ + pgtable_page_dtor(pte); \ + tlb_remove_page((tlb), pte); \ +} while (0) + +#ifdef CONFIG_32BIT + +/* + * allocating and freeing a pmd is trivial: the 1-entry pmd is + * inside the pgd, so has no extra memory associated with it. + */ +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb, x) do { } while (0) + +#endif + +#ifdef CONFIG_64BIT + +static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) +{ + pmd_t *pmd; + + pmd = (pmd_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT, PMD_ORDER); + if (pmd) + pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table); + return pmd; +} + +static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) +{ + free_pages((unsigned long)pmd, PMD_ORDER); +} + +#define __pmd_free_tlb(tlb, x) pmd_free((tlb)->mm, x) + +#endif + +#define check_pgt_cache() do { } while (0) + +extern void pagetable_init(void); + +#endif /* _ASM_PGALLOC_H */ diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h new file mode 100644 index 000000000000..55813d6150c7 --- /dev/null +++ b/arch/mips/include/asm/pgtable-32.h @@ -0,0 +1,234 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle + * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_PGTABLE_32_H +#define _ASM_PGTABLE_32_H + +#include +#include + +#include +#include +#include + +#include + +/* + * - add_wired_entry() add a fixed TLB entry, and move wired register + */ +extern void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, + unsigned long entryhi, unsigned long pagemask); + +/* + * - add_temporary_entry() add a temporary TLB entry. We use TLB entries + * starting at the top and working down. This is for populating the + * TLB before trap_init() puts the TLB miss handler in place. It + * should be used only for entries matching the actual page tables, + * to prevent inconsistencies. + */ +extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, + unsigned long entryhi, unsigned long pagemask); + + +/* Basically we have the same two-level (which is the logical three level + * Linux page table layout folded) page tables as the i386. Some day + * when we have proper page coloring support we can have a 1% quicker + * tlb refill handling mechanism, but for now it is a bit slower but + * works even with the cache aliasing problem the R4k and above have. + */ + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define PGDIR_SHIFT (2 * PAGE_SHIFT + PTE_ORDER - PTE_T_LOG2) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * Entries per page directory level: we use two-level, so + * we don't really have any PUD/PMD directory physically. + */ +#define __PGD_ORDER (32 - 3 * PAGE_SHIFT + PGD_T_LOG2 + PTE_T_LOG2) +#define PGD_ORDER (__PGD_ORDER >= 0 ? __PGD_ORDER : 0) +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 1 +#define PTE_ORDER 0 + +#define PTRS_PER_PGD (USER_PTRS_PER_PGD * 2) +#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t)) + +#define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#define VMALLOC_START MAP_BASE + +#define PKMAP_BASE (0xfe000000UL) + +#ifdef CONFIG_HIGHMEM +# define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE) +#else +# define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) +#endif + +#ifdef CONFIG_64BIT_PHYS_ADDR +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e)) +#else +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#endif +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +extern void load_pgd(unsigned long pg_dir); + +extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)]; + +/* + * Empty pgd/pmd entries point to the invalid_pte_table. + */ +static inline int pmd_none(pmd_t pmd) +{ + return pmd_val(pmd) == (unsigned long) invalid_pte_table; +} + +#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK) + +static inline int pmd_present(pmd_t pmd) +{ + return pmd_val(pmd) != (unsigned long) invalid_pte_table; +} + +static inline void pmd_clear(pmd_t *pmdp) +{ + pmd_val(*pmdp) = ((unsigned long) invalid_pte_table); +} + +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) +#define pte_page(x) pfn_to_page(pte_pfn(x)) +#define pte_pfn(x) ((unsigned long)((x).pte_high >> 6)) +static inline pte_t +pfn_pte(unsigned long pfn, pgprot_t prot) +{ + pte_t pte; + pte.pte_high = (pfn << 6) | (pgprot_val(prot) & 0x3f); + pte.pte_low = pgprot_val(prot); + return pte; +} + +#else + +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +#ifdef CONFIG_CPU_VR41XX +#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2))) +#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot)) +#else +#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT)) +#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#endif +#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */ + +#define __pgd_offset(address) pgd_index(address) +#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) +#define __pmd_offset(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) + +/* to find an entry in a page-table-directory */ +#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr)) + +/* Find an entry in the third-level page table.. */ +#define __pte_offset(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) + +#define pte_offset_map(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) +#define pte_offset_map_nested(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) +#define pte_unmap(pte) ((void)(pte)) +#define pte_unmap_nested(pte) ((void)(pte)) + +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + +/* Swap entries must have VALID bit cleared. */ +#define __swp_type(x) (((x).val >> 10) & 0x1f) +#define __swp_offset(x) ((x).val >> 15) +#define __swp_entry(type,offset) \ + ((swp_entry_t) { ((type) << 10) | ((offset) << 15) }) + +/* + * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range: + */ +#define PTE_FILE_MAX_BITS 28 + +#define pte_to_pgoff(_pte) ((((_pte).pte >> 1 ) & 0x07) | \ + (((_pte).pte >> 2 ) & 0x38) | \ + (((_pte).pte >> 10) << 6 )) + +#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x07) << 1 ) | \ + (((off) & 0x38) << 2 ) | \ + (((off) >> 6 ) << 10) | \ + _PAGE_FILE }) + +#else + +/* Swap entries must have VALID and GLOBAL bits cleared. */ +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) +#define __swp_type(x) (((x).val >> 2) & 0x1f) +#define __swp_offset(x) ((x).val >> 7) +#define __swp_entry(type,offset) \ + ((swp_entry_t) { ((type) << 2) | ((offset) << 7) }) +#else +#define __swp_type(x) (((x).val >> 8) & 0x1f) +#define __swp_offset(x) ((x).val >> 13) +#define __swp_entry(type,offset) \ + ((swp_entry_t) { ((type) << 8) | ((offset) << 13) }) +#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */ + +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) +/* + * Bits 0 and 1 of pte_high are taken, use the rest for the page offset... + */ +#define PTE_FILE_MAX_BITS 30 + +#define pte_to_pgoff(_pte) ((_pte).pte_high >> 2) +#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) << 2 }) + +#else +/* + * Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range: + */ +#define PTE_FILE_MAX_BITS 28 + +#define pte_to_pgoff(_pte) ((((_pte).pte >> 1) & 0x7) | \ + (((_pte).pte >> 2) & 0x8) | \ + (((_pte).pte >> 8) << 4)) + +#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7) << 1) | \ + (((off) & 0x8) << 2) | \ + (((off) >> 4) << 8) | \ + _PAGE_FILE }) +#endif + +#endif + +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high }) +#define __swp_entry_to_pte(x) ((pte_t) { 0, (x).val }) +#else +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) +#endif + +#endif /* _ASM_PGTABLE_32_H */ diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h new file mode 100644 index 000000000000..943515f0ef87 --- /dev/null +++ b/arch/mips/include/asm/pgtable-64.h @@ -0,0 +1,253 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle + * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_PGTABLE_64_H +#define _ASM_PGTABLE_64_H + +#include + +#include +#include +#include +#include + +#include + +/* + * Each address space has 2 4K pages as its page directory, giving 1024 + * (== PTRS_PER_PGD) 8 byte pointers to pmd tables. Each pmd table is a + * single 4K page, giving 512 (== PTRS_PER_PMD) 8 byte pointers to page + * tables. Each page table is also a single 4K page, giving 512 (== + * PTRS_PER_PTE) 8 byte ptes. Each pud entry is initialized to point to + * invalid_pmd_table, each pmd entry is initialized to point to + * invalid_pte_table, each pte is initialized to 0. When memory is low, + * and a pmd table or a page table allocation fails, empty_bad_pmd_table + * and empty_bad_page_table is returned back to higher layer code, so + * that the failure is recognized later on. Linux does not seem to + * handle these failures very well though. The empty_bad_page_table has + * invalid pte entries in it, to force page faults. + * + * Kernel mappings: kernel mappings are held in the swapper_pg_table. + * The layout is identical to userspace except it's indexed with the + * fault address - VMALLOC_START. + */ + +/* PMD_SHIFT determines the size of the area a second-level page table can map */ +#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT + PTE_ORDER - 3)) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define PGDIR_SHIFT (PMD_SHIFT + (PAGE_SHIFT + PMD_ORDER - 3)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * For 4kB page size we use a 3 level page tree and an 8kB pud, which + * permits us mapping 40 bits of virtual address space. + * + * We used to implement 41 bits by having an order 1 pmd level but that seemed + * rather pointless. + * + * For 8kB page size we use a 3 level page tree which permits a total of + * 8TB of address space. Alternatively a 33-bit / 8GB organization using + * two levels would be easy to implement. + * + * For 16kB page size we use a 2 level page tree which permits a total of + * 36 bits of virtual address space. We could add a third level but it seems + * like at the moment there's no need for this. + * + * For 64kB page size we use a 2 level page table tree for a total of 42 bits + * of virtual address space. + */ +#ifdef CONFIG_PAGE_SIZE_4KB +#define PGD_ORDER 1 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 0 +#define PTE_ORDER 0 +#endif +#ifdef CONFIG_PAGE_SIZE_8KB +#define PGD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 0 +#define PTE_ORDER 0 +#endif +#ifdef CONFIG_PAGE_SIZE_16KB +#define PGD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 0 +#define PTE_ORDER 0 +#endif +#ifdef CONFIG_PAGE_SIZE_64KB +#define PGD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 0 +#define PTE_ORDER 0 +#endif + +#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t)) +#define PTRS_PER_PMD ((PAGE_SIZE << PMD_ORDER) / sizeof(pmd_t)) +#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t)) + +#if PGDIR_SIZE >= TASK_SIZE +#define USER_PTRS_PER_PGD (1) +#else +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) +#endif +#define FIRST_USER_ADDRESS 0UL + +#define VMALLOC_START MAP_BASE +#define VMALLOC_END \ + (VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE) +#if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \ + VMALLOC_START != CKSSEG +/* Load modules into 32bit-compatible segment. */ +#define MODULE_START CKSSEG +#define MODULE_END (FIXADDR_START-2*PAGE_SIZE) +extern pgd_t module_pg_dir[PTRS_PER_PGD]; +#endif + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pmd_ERROR(e) \ + printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e)) + +extern pte_t invalid_pte_table[PTRS_PER_PTE]; +extern pte_t empty_bad_page_table[PTRS_PER_PTE]; +extern pmd_t invalid_pmd_table[PTRS_PER_PMD]; +extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD]; + +/* + * Empty pgd/pmd entries point to the invalid_pte_table. + */ +static inline int pmd_none(pmd_t pmd) +{ + return pmd_val(pmd) == (unsigned long) invalid_pte_table; +} + +#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK) + +static inline int pmd_present(pmd_t pmd) +{ + return pmd_val(pmd) != (unsigned long) invalid_pte_table; +} + +static inline void pmd_clear(pmd_t *pmdp) +{ + pmd_val(*pmdp) = ((unsigned long) invalid_pte_table); +} + +/* + * Empty pud entries point to the invalid_pmd_table. + */ +static inline int pud_none(pud_t pud) +{ + return pud_val(pud) == (unsigned long) invalid_pmd_table; +} + +static inline int pud_bad(pud_t pud) +{ + return pud_val(pud) & ~PAGE_MASK; +} + +static inline int pud_present(pud_t pud) +{ + return pud_val(pud) != (unsigned long) invalid_pmd_table; +} + +static inline void pud_clear(pud_t *pudp) +{ + pud_val(*pudp) = ((unsigned long) invalid_pmd_table); +} + +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +#ifdef CONFIG_CPU_VR41XX +#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2))) +#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot)) +#else +#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT)) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#endif + +#define __pgd_offset(address) pgd_index(address) +#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) +#define __pmd_offset(address) pmd_index(address) + +/* to find an entry in a kernel page-table-directory */ +#ifdef MODULE_START +#define pgd_offset_k(address) \ + ((address) >= MODULE_START ? module_pg_dir : pgd_offset(&init_mm, 0UL)) +#else +#define pgd_offset_k(address) pgd_offset(&init_mm, 0UL) +#endif + +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) + +/* to find an entry in a page-table-directory */ +#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr)) + +static inline unsigned long pud_page_vaddr(pud_t pud) +{ + return pud_val(pud); +} +#define pud_phys(pud) virt_to_phys((void *)pud_val(pud)) +#define pud_page(pud) (pfn_to_page(pud_phys(pud) >> PAGE_SHIFT)) + +/* Find an entry in the second-level page table.. */ +static inline pmd_t *pmd_offset(pud_t * pud, unsigned long address) +{ + return (pmd_t *) pud_page_vaddr(*pud) + pmd_index(address); +} + +/* Find an entry in the third-level page table.. */ +#define __pte_offset(address) \ + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) +#define pte_offset_map(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) +#define pte_offset_map_nested(dir, address) \ + ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) +#define pte_unmap(pte) ((void)(pte)) +#define pte_unmap_nested(pte) ((void)(pte)) + +/* + * Initialize a new pgd / pmd table with invalid pointers. + */ +extern void pgd_init(unsigned long page); +extern void pmd_init(unsigned long page, unsigned long pagetable); + +/* + * Non-present pages: high 24 bits are offset, next 8 bits type, + * low 32 bits zero. + */ +static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset) +{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; } + +#define __swp_type(x) (((x).val >> 32) & 0xff) +#define __swp_offset(x) ((x).val >> 40) +#define __swp_entry(type, offset) ((swp_entry_t) { pte_val(mk_swap_pte((type), (offset))) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +/* + * Bits 0, 4, 6, and 7 are taken. Let's leave bits 1, 2, 3, and 5 alone to + * make things easier, and only use the upper 56 bits for the page offset... + */ +#define PTE_FILE_MAX_BITS 56 + +#define pte_to_pgoff(_pte) ((_pte).pte >> 8) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 8) | _PAGE_FILE }) + +#endif /* _ASM_PGTABLE_64_H */ diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h new file mode 100644 index 000000000000..51b34a48c84a --- /dev/null +++ b/arch/mips/include/asm/pgtable-bits.h @@ -0,0 +1,137 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 2002 by Ralf Baechle + * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. + * Copyright (C) 2002 Maciej W. Rozycki + */ +#ifndef _ASM_PGTABLE_BITS_H +#define _ASM_PGTABLE_BITS_H + + +/* + * Note that we shift the lower 32bits of each EntryLo[01] entry + * 6 bits to the left. That way we can convert the PFN into the + * physical address by a single 'and' operation and gain 6 additional + * bits for storing information which isn't present in a normal + * MIPS page table. + * + * Similar to the Alpha port, we need to keep track of the ref + * and mod bits in software. We have a software "yeah you can read + * from this page" bit, and a hardware one which actually lets the + * process read from the page. On the same token we have a software + * writable bit and the real hardware one which actually lets the + * process write to the page, this keeps a mod bit via the hardware + * dirty bit. + * + * Certain revisions of the R4000 and R5000 have a bug where if a + * certain sequence occurs in the last 3 instructions of an executable + * page, and the following page is not mapped, the cpu can do + * unpredictable things. The code (when it is written) to deal with + * this problem will be in the update_mmu_cache() code for the r4k. + */ +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) + +#define _PAGE_PRESENT (1<<6) /* implemented in software */ +#define _PAGE_READ (1<<7) /* implemented in software */ +#define _PAGE_WRITE (1<<8) /* implemented in software */ +#define _PAGE_ACCESSED (1<<9) /* implemented in software */ +#define _PAGE_MODIFIED (1<<10) /* implemented in software */ +#define _PAGE_FILE (1<<10) /* set:pagecache unset:swap */ + +#define _PAGE_R4KBUG (1<<0) /* workaround for r4k bug */ +#define _PAGE_GLOBAL (1<<0) +#define _PAGE_VALID (1<<1) +#define _PAGE_SILENT_READ (1<<1) /* synonym */ +#define _PAGE_DIRTY (1<<2) /* The MIPS dirty bit */ +#define _PAGE_SILENT_WRITE (1<<2) +#define _CACHE_SHIFT 3 +#define _CACHE_MASK (7<<3) + +#else + +#define _PAGE_PRESENT (1<<0) /* implemented in software */ +#define _PAGE_READ (1<<1) /* implemented in software */ +#define _PAGE_WRITE (1<<2) /* implemented in software */ +#define _PAGE_ACCESSED (1<<3) /* implemented in software */ +#define _PAGE_MODIFIED (1<<4) /* implemented in software */ +#define _PAGE_FILE (1<<4) /* set:pagecache unset:swap */ + +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + +#define _PAGE_GLOBAL (1<<8) +#define _PAGE_VALID (1<<9) +#define _PAGE_SILENT_READ (1<<9) /* synonym */ +#define _PAGE_DIRTY (1<<10) /* The MIPS dirty bit */ +#define _PAGE_SILENT_WRITE (1<<10) +#define _CACHE_UNCACHED (1<<11) +#define _CACHE_MASK (1<<11) + +#else + +#define _PAGE_R4KBUG (1<<5) /* workaround for r4k bug */ +#define _PAGE_GLOBAL (1<<6) +#define _PAGE_VALID (1<<7) +#define _PAGE_SILENT_READ (1<<7) /* synonym */ +#define _PAGE_DIRTY (1<<8) /* The MIPS dirty bit */ +#define _PAGE_SILENT_WRITE (1<<8) +#define _CACHE_SHIFT 9 +#define _CACHE_MASK (7<<9) + +#endif +#endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */ + + +/* + * Cache attributes + */ +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + +#define _CACHE_CACHABLE_NONCOHERENT 0 + +#elif defined(CONFIG_CPU_SB1) + +/* No penalty for being coherent on the SB1, so just + use it for "noncoherent" spaces, too. Shouldn't hurt. */ + +#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) +#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) +#define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT) +#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) + +#elif defined(CONFIG_CPU_RM9000) + +#define _CACHE_WT (0<<_CACHE_SHIFT) +#define _CACHE_WTWA (1<<_CACHE_SHIFT) +#define _CACHE_UC_B (2<<_CACHE_SHIFT) +#define _CACHE_WB (3<<_CACHE_SHIFT) +#define _CACHE_CWBEA (4<<_CACHE_SHIFT) +#define _CACHE_CWB (5<<_CACHE_SHIFT) +#define _CACHE_UCNB (6<<_CACHE_SHIFT) +#define _CACHE_FPC (7<<_CACHE_SHIFT) + +#define _CACHE_UNCACHED _CACHE_UC_B +#define _CACHE_CACHABLE_NONCOHERENT _CACHE_WB + +#else + +#define _CACHE_CACHABLE_NO_WA (0<<_CACHE_SHIFT) /* R4600 only */ +#define _CACHE_CACHABLE_WA (1<<_CACHE_SHIFT) /* R4600 only */ +#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) /* R4[0246]00 */ +#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT) /* R4[0246]00 */ +#define _CACHE_CACHABLE_CE (4<<_CACHE_SHIFT) /* R4[04]00MC only */ +#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) /* R4[04]00MC only */ +#define _CACHE_CACHABLE_COHERENT (5<<_CACHE_SHIFT) /* MIPS32R2 CMP */ +#define _CACHE_CACHABLE_CUW (6<<_CACHE_SHIFT) /* R4[04]00MC only */ +#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) /* R10000 only */ + +#endif + +#define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED) +#define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED) + +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK) + +#endif /* _ASM_PGTABLE_BITS_H */ diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h new file mode 100644 index 000000000000..6a0edf72ffbc --- /dev/null +++ b/arch/mips/include/asm/pgtable.h @@ -0,0 +1,383 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Ralf Baechle + */ +#ifndef _ASM_PGTABLE_H +#define _ASM_PGTABLE_H + +#ifdef CONFIG_32BIT +#include +#endif +#ifdef CONFIG_64BIT +#include +#endif + +#include +#include + +struct mm_struct; +struct vm_area_struct; + +#define PAGE_NONE __pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT) +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ + _page_cachable_default) +#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_READ | \ + _page_cachable_default) +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_READ | \ + _page_cachable_default) +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \ + _PAGE_GLOBAL | _page_cachable_default) +#define PAGE_USERIO __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ + _page_cachable_default) +#define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \ + __WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED) + +/* + * MIPS can't do page protection for execute, and considers that the same like + * read. Also, write permissions imply read permissions. This is the closest + * we can get by reasonable means.. + */ + +/* + * Dummy values to fill the table in mmap.c + * The real values will be generated at runtime + */ +#define __P000 __pgprot(0) +#define __P001 __pgprot(0) +#define __P010 __pgprot(0) +#define __P011 __pgprot(0) +#define __P100 __pgprot(0) +#define __P101 __pgprot(0) +#define __P110 __pgprot(0) +#define __P111 __pgprot(0) + +#define __S000 __pgprot(0) +#define __S001 __pgprot(0) +#define __S010 __pgprot(0) +#define __S011 __pgprot(0) +#define __S100 __pgprot(0) +#define __S101 __pgprot(0) +#define __S110 __pgprot(0) +#define __S111 __pgprot(0) + +extern unsigned long _page_cachable_default; + +/* + * ZERO_PAGE is a global shared page that is always zero; used + * for zero-mapped memory areas etc.. + */ + +extern unsigned long empty_zero_page; +extern unsigned long zero_page_mask; + +#define ZERO_PAGE(vaddr) \ + (virt_to_page((void *)(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask)))) + +extern void paging_init(void); + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define pmd_phys(pmd) virt_to_phys((void *)pmd_val(pmd)) +#define pmd_page(pmd) (pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT)) +#define pmd_page_vaddr(pmd) pmd_val(pmd) + +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) + +#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL)) +#define pte_present(pte) ((pte).pte_low & _PAGE_PRESENT) + +static inline void set_pte(pte_t *ptep, pte_t pte) +{ + ptep->pte_high = pte.pte_high; + smp_wmb(); + ptep->pte_low = pte.pte_low; + //printk("pte_high %x pte_low %x\n", ptep->pte_high, ptep->pte_low); + + if (pte.pte_low & _PAGE_GLOBAL) { + pte_t *buddy = ptep_buddy(ptep); + /* + * Make sure the buddy is global too (if it's !none, + * it better already be global) + */ + if (pte_none(*buddy)) { + buddy->pte_low |= _PAGE_GLOBAL; + buddy->pte_high |= _PAGE_GLOBAL; + } + } +} +#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) + +static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + pte_t null = __pte(0); + + /* Preserve global status for the pair */ + if (ptep_buddy(ptep)->pte_low & _PAGE_GLOBAL) + null.pte_low = null.pte_high = _PAGE_GLOBAL; + + set_pte_at(mm, addr, ptep, null); +} +#else + +#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL)) +#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) + +/* + * Certain architectures need to do special things when pte's + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +static inline void set_pte(pte_t *ptep, pte_t pteval) +{ + *ptep = pteval; +#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX) + if (pte_val(pteval) & _PAGE_GLOBAL) { + pte_t *buddy = ptep_buddy(ptep); + /* + * Make sure the buddy is global too (if it's !none, + * it better already be global) + */ + if (pte_none(*buddy)) + pte_val(*buddy) = pte_val(*buddy) | _PAGE_GLOBAL; + } +#endif +} +#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) + +static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ +#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX) + /* Preserve global status for the pair */ + if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL) + set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL)); + else +#endif + set_pte_at(mm, addr, ptep, __pte(0)); +} +#endif + +/* + * (pmds are folded into puds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0) + +#ifdef CONFIG_64BIT +/* + * (puds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0) +#endif + +#define PGD_T_LOG2 (__builtin_ffs(sizeof(pgd_t)) - 1) +#define PMD_T_LOG2 (__builtin_ffs(sizeof(pmd_t)) - 1) +#define PTE_T_LOG2 (__builtin_ffs(sizeof(pte_t)) - 1) + +/* + * We used to declare this array with size but gcc 3.3 and older are not able + * to find that this expression is a constant, so the size is dropped. + */ +extern pgd_t swapper_pg_dir[]; + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) +static inline int pte_write(pte_t pte) { return pte.pte_low & _PAGE_WRITE; } +static inline int pte_dirty(pte_t pte) { return pte.pte_low & _PAGE_MODIFIED; } +static inline int pte_young(pte_t pte) { return pte.pte_low & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte.pte_low & _PAGE_FILE; } + +static inline pte_t pte_wrprotect(pte_t pte) +{ + pte.pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE); + pte.pte_high &= ~_PAGE_SILENT_WRITE; + return pte; +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + pte.pte_low &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE); + pte.pte_high &= ~_PAGE_SILENT_WRITE; + return pte; +} + +static inline pte_t pte_mkold(pte_t pte) +{ + pte.pte_low &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ); + pte.pte_high &= ~_PAGE_SILENT_READ; + return pte; +} + +static inline pte_t pte_mkwrite(pte_t pte) +{ + pte.pte_low |= _PAGE_WRITE; + if (pte.pte_low & _PAGE_MODIFIED) { + pte.pte_low |= _PAGE_SILENT_WRITE; + pte.pte_high |= _PAGE_SILENT_WRITE; + } + return pte; +} + +static inline pte_t pte_mkdirty(pte_t pte) +{ + pte.pte_low |= _PAGE_MODIFIED; + if (pte.pte_low & _PAGE_WRITE) { + pte.pte_low |= _PAGE_SILENT_WRITE; + pte.pte_high |= _PAGE_SILENT_WRITE; + } + return pte; +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + pte.pte_low |= _PAGE_ACCESSED; + if (pte.pte_low & _PAGE_READ) { + pte.pte_low |= _PAGE_SILENT_READ; + pte.pte_high |= _PAGE_SILENT_READ; + } + return pte; +} +#else +static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; } +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_MODIFIED; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } + +static inline pte_t pte_wrprotect(pte_t pte) +{ + pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE); + return pte; +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + pte_val(pte) &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE); + return pte; +} + +static inline pte_t pte_mkold(pte_t pte) +{ + pte_val(pte) &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ); + return pte; +} + +static inline pte_t pte_mkwrite(pte_t pte) +{ + pte_val(pte) |= _PAGE_WRITE; + if (pte_val(pte) & _PAGE_MODIFIED) + pte_val(pte) |= _PAGE_SILENT_WRITE; + return pte; +} + +static inline pte_t pte_mkdirty(pte_t pte) +{ + pte_val(pte) |= _PAGE_MODIFIED; + if (pte_val(pte) & _PAGE_WRITE) + pte_val(pte) |= _PAGE_SILENT_WRITE; + return pte; +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + pte_val(pte) |= _PAGE_ACCESSED; + if (pte_val(pte) & _PAGE_READ) + pte_val(pte) |= _PAGE_SILENT_READ; + return pte; +} +#endif +static inline int pte_special(pte_t pte) { return 0; } +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +/* + * Macro to make mark a page protection value as "uncacheable". Note + * that "protection" is really a misnomer here as the protection value + * contains the memory attribute bits, dirty bits, and various other + * bits as well. + */ +#define pgprot_noncached pgprot_noncached + +static inline pgprot_t pgprot_noncached(pgprot_t _prot) +{ + unsigned long prot = pgprot_val(_prot); + + prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED; + + return __pgprot(prot); +} + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte.pte_low &= _PAGE_CHG_MASK; + pte.pte_high &= ~0x3f; + pte.pte_low |= pgprot_val(newprot); + pte.pte_high |= pgprot_val(newprot) & 0x3f; + return pte; +} +#else +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)); +} +#endif + + +extern void __update_tlb(struct vm_area_struct *vma, unsigned long address, + pte_t pte); +extern void __update_cache(struct vm_area_struct *vma, unsigned long address, + pte_t pte); + +static inline void update_mmu_cache(struct vm_area_struct *vma, + unsigned long address, pte_t pte) +{ + __update_tlb(vma, address, pte); + __update_cache(vma, address, pte); +} + +#define kern_addr_valid(addr) (1) + +#ifdef CONFIG_64BIT_PHYS_ADDR +extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot); + +static inline int io_remap_pfn_range(struct vm_area_struct *vma, + unsigned long vaddr, + unsigned long pfn, + unsigned long size, + pgprot_t prot) +{ + phys_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size); + return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot); +} +#else +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) +#endif + +#include + +/* + * We provide our own get_unmapped area to cope with the virtual aliasing + * constraints placed on us by the cache architecture. + */ +#define HAVE_ARCH_UNMAPPED_AREA + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +#endif /* _ASM_PGTABLE_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h b/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h new file mode 100644 index 000000000000..ebdbab973e41 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h @@ -0,0 +1,46 @@ +/* + * include/asm-mips/pmc-sierra/msp71xx/gpio.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * @author Patrick Glass + */ + +#ifndef __PMC_MSP71XX_GPIO_H +#define __PMC_MSP71XX_GPIO_H + +/* Max number of gpio's is 28 on chip plus 3 banks of I2C IO Expanders */ +#define ARCH_NR_GPIOS (28 + (3 * 8)) + +/* new generic GPIO API - see Documentation/gpio.txt */ +#include + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep + +/* Setup calls for the gpio and gpio extended */ +extern void msp71xx_init_gpio(void); +extern void msp71xx_init_gpio_extended(void); +extern int msp71xx_set_output_drive(unsigned gpio, int value); + +/* Custom output drive functionss */ +static inline int gpio_set_output_drive(unsigned gpio, int value) +{ + return msp71xx_set_output_drive(gpio, value); +} + +/* IRQ's are not supported for gpio lines */ +static inline int gpio_to_irq(unsigned gpio) +{ + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return -EINVAL; +} + +#endif /* __PMC_MSP71XX_GPIO_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h new file mode 100644 index 000000000000..c84bcf9570b1 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h @@ -0,0 +1,151 @@ +/* + * Defines for the MSP interrupt controller. + * + * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. + * Author: Carsten Langgaard, carstenl@mips.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#ifndef _MSP_CIC_INT_H +#define _MSP_CIC_INT_H + +/* + * The PMC-Sierra CIC interrupts are all centrally managed by the + * CIC sub-system. + * We attempt to keep the interrupt numbers as consistent as possible + * across all of the MSP devices, but some differences will creep in ... + * The interrupts which are directly forwarded to the MIPS core interrupts + * are assigned interrupts in the range 0-7, interrupts cascaded through + * the CIC are assigned interrupts 8-39. The cascade occurs on C_IRQ4 + * (MSP_INT_CIC). Currently we don't really distinguish between VPE1 + * and VPE0 (or thread contexts for that matter). Will have to fix. + * The PER interrupts are assigned interrupts in the range 40-71. +*/ + + +/* + * IRQs directly forwarded to the CPU + */ +#define MSP_MIPS_INTBASE 0 +#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ +#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ +#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ +#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ +#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */ +#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */ +#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */ +#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */ + +/* + * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) + * These defines should be tied to the register definitions for the CIC + * interrupt routine. For now, just use hard-coded values. + */ +#define MSP_CIC_INTBASE (MSP_MIPS_INTBASE + 8) +#define MSP_INT_EXT0 (MSP_CIC_INTBASE + 0) + /* External interrupt 0 */ +#define MSP_INT_EXT1 (MSP_CIC_INTBASE + 1) + /* External interrupt 1 */ +#define MSP_INT_EXT2 (MSP_CIC_INTBASE + 2) + /* External interrupt 2 */ +#define MSP_INT_EXT3 (MSP_CIC_INTBASE + 3) + /* External interrupt 3 */ +#define MSP_INT_CPUIF (MSP_CIC_INTBASE + 4) + /* CPU interface interrupt */ +#define MSP_INT_EXT4 (MSP_CIC_INTBASE + 5) + /* External interrupt 4 */ +#define MSP_INT_CIC_USB (MSP_CIC_INTBASE + 6) + /* Cascaded IRQ for USB */ +#define MSP_INT_MBOX (MSP_CIC_INTBASE + 7) + /* Sec engine mailbox IRQ */ +#define MSP_INT_EXT5 (MSP_CIC_INTBASE + 8) + /* External interrupt 5 */ +#define MSP_INT_TDM (MSP_CIC_INTBASE + 9) + /* TDM interrupt */ +#define MSP_INT_CIC_MAC0 (MSP_CIC_INTBASE + 10) + /* Cascaded IRQ for MAC 0 */ +#define MSP_INT_CIC_MAC1 (MSP_CIC_INTBASE + 11) + /* Cascaded IRQ for MAC 1 */ +#define MSP_INT_CIC_SEC (MSP_CIC_INTBASE + 12) + /* Cascaded IRQ for sec engine */ +#define MSP_INT_PER (MSP_CIC_INTBASE + 13) + /* Peripheral interrupt */ +#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14) + /* SLP timer 0 */ +#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15) + /* SLP timer 1 */ +#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16) + /* SLP timer 2 */ +#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17) + /* VPE0 MIPS timer */ +#define MSP_INT_BLKCP (MSP_CIC_INTBASE + 18) + /* Block Copy */ +#define MSP_INT_UART0 (MSP_CIC_INTBASE + 19) + /* UART 0 */ +#define MSP_INT_PCI (MSP_CIC_INTBASE + 20) + /* PCI subsystem */ +#define MSP_INT_EXT6 (MSP_CIC_INTBASE + 21) + /* External interrupt 5 */ +#define MSP_INT_PCI_MSI (MSP_CIC_INTBASE + 22) + /* PCI Message Signal */ +#define MSP_INT_CIC_SAR (MSP_CIC_INTBASE + 23) + /* Cascaded ADSL2+ SAR IRQ */ +#define MSP_INT_DSL (MSP_CIC_INTBASE + 24) + /* ADSL2+ IRQ */ +#define MSP_INT_CIC_ERR (MSP_CIC_INTBASE + 25) + /* SLP error condition */ +#define MSP_INT_VPE1_TIMER (MSP_CIC_INTBASE + 26) + /* VPE1 MIPS timer */ +#define MSP_INT_VPE0_PC (MSP_CIC_INTBASE + 27) + /* VPE0 Performance counter */ +#define MSP_INT_VPE1_PC (MSP_CIC_INTBASE + 28) + /* VPE1 Performance counter */ +#define MSP_INT_EXT7 (MSP_CIC_INTBASE + 29) + /* External interrupt 5 */ +#define MSP_INT_VPE0_SW (MSP_CIC_INTBASE + 30) + /* VPE0 Software interrupt */ +#define MSP_INT_VPE1_SW (MSP_CIC_INTBASE + 31) + /* VPE0 Software interrupt */ + +/* + * IRQs cascaded on CIC PER interrupt (MSP_INT_PER) + */ +#define MSP_PER_INTBASE (MSP_CIC_INTBASE + 32) +/* Reserved 0-1 */ +#define MSP_INT_UART1 (MSP_PER_INTBASE + 2) + /* UART 1 */ +/* Reserved 3-5 */ +#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) + /* 2-wire */ +#define MSP_INT_TM0 (MSP_PER_INTBASE + 7) + /* Peripheral timer block out 0 */ +#define MSP_INT_TM1 (MSP_PER_INTBASE + 8) + /* Peripheral timer block out 1 */ +/* Reserved 9 */ +#define MSP_INT_SPRX (MSP_PER_INTBASE + 10) + /* SPI RX complete */ +#define MSP_INT_SPTX (MSP_PER_INTBASE + 11) + /* SPI TX complete */ +#define MSP_INT_GPIO (MSP_PER_INTBASE + 12) + /* GPIO */ +#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) + /* Peripheral error */ +/* Reserved 14-31 */ + +#endif /* !_MSP_CIC_INT_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h new file mode 100644 index 000000000000..1d9f05474820 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h @@ -0,0 +1,43 @@ +/* + * Defines for the MSP interrupt handlers. + * + * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved. + * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#ifndef _MSP_INT_H +#define _MSP_INT_H + +/* + * The PMC-Sierra MSP product line has at least two different interrupt + * controllers, the SLP register based scheme and the CIC interrupt + * controller block mechanism. This file distinguishes between them + * so that devices see a uniform interface. + */ + +#if defined(CONFIG_IRQ_MSP_SLP) + #include "msp_slp_int.h" +#elif defined(CONFIG_IRQ_MSP_CIC) + #include "msp_cic_int.h" +#else + #error "What sort of interrupt controller does *your* MSP have?" +#endif + +#endif /* !_MSP_INT_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h new file mode 100644 index 000000000000..415606903617 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h @@ -0,0 +1,205 @@ +/* + * Copyright (c) 2000-2006 PMC-Sierra INC. + * + * This program is free software; you can redistribute it + * and/or modify it under the terms of the GNU General + * Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA + * 02139, USA. + * + * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND + * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS + * SOFTWARE. + */ + +#ifndef _MSP_PCI_H_ +#define _MSP_PCI_H_ + +#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220)) + +/* + * It is convenient to program the OATRAN register so that + * Athena virtual address space and PCI address space are + * the same. This is not a requirement, just a convenience. + * + * The only hard restrictions on the value of OATRAN is that + * OATRAN must not be programmed to allow translated memory + * addresses to fall within the lowest 512MB of + * PCI address space. This region is hardcoded + * for use as Athena PCI Host Controller target + * access memory space to the Athena's SDRAM. + * + * Note that OATRAN applies only to memory accesses, not + * to I/O accesses. + * + * To program OATRAN to make Athena virtual address space + * and PCI address space have the same values, OATRAN + * is to be programmed to 0xB8000000. The top seven + * bits of the value mimic the seven bits clipped off + * by the PCI Host controller. + * + * With OATRAN at the said value, when the CPU does + * an access to its virtual address at, say 0xB900_5000, + * the address appearing on the PCI bus will be + * 0xB900_5000. + * - Michael Penner + */ +#define MSP_PCI_OATRAN 0xB8000000UL + +#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL) +#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000) +#define MSP_PCI_SPACE_END \ + (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1) +#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL) +#define MSP_PCI_IOSPACE_SIZE 0x1000 +#define MSP_PCI_IOSPACE_END \ + (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1) + +/* IRQ for PCI status interrupts */ +#define PCI_STAT_IRQ 20 + +#define QFLUSH_REG_1 0xB7F40000 + +typedef volatile unsigned int pcireg; +typedef void * volatile ppcireg; + +struct pci_block_copy +{ + pcireg unused1; /* +0x00 */ + pcireg unused2; /* +0x04 */ + ppcireg unused3; /* +0x08 */ + ppcireg unused4; /* +0x0C */ + pcireg unused5; /* +0x10 */ + pcireg unused6; /* +0x14 */ + pcireg unused7; /* +0x18 */ + ppcireg unused8; /* +0x1C */ + ppcireg unused9; /* +0x20 */ + pcireg unusedA; /* +0x24 */ + ppcireg unusedB; /* +0x28 */ + ppcireg unusedC; /* +0x2C */ +}; + +enum +{ + config_device_vendor, /* 0 */ + config_status_command, /* 1 */ + config_class_revision, /* 2 */ + config_BIST_header_latency_cache, /* 3 */ + config_BAR0, /* 4 */ + config_BAR1, /* 5 */ + config_BAR2, /* 6 */ + config_not_used7, /* 7 */ + config_not_used8, /* 8 */ + config_not_used9, /* 9 */ + config_CIS, /* 10 */ + config_subsystem, /* 11 */ + config_not_used12, /* 12 */ + config_capabilities, /* 13 */ + config_not_used14, /* 14 */ + config_lat_grant_irq, /* 15 */ + config_message_control,/* 16 */ + config_message_addr, /* 17 */ + config_message_data, /* 18 */ + config_VPD_addr, /* 19 */ + config_VPD_data, /* 20 */ + config_maxregs /* 21 - number of registers */ +}; + +struct msp_pci_regs +{ + pcireg hop_unused_00; /* +0x00 */ + pcireg hop_unused_04; /* +0x04 */ + pcireg hop_unused_08; /* +0x08 */ + pcireg hop_unused_0C; /* +0x0C */ + pcireg hop_unused_10; /* +0x10 */ + pcireg hop_unused_14; /* +0x14 */ + pcireg hop_unused_18; /* +0x18 */ + pcireg hop_unused_1C; /* +0x1C */ + pcireg hop_unused_20; /* +0x20 */ + pcireg hop_unused_24; /* +0x24 */ + pcireg hop_unused_28; /* +0x28 */ + pcireg hop_unused_2C; /* +0x2C */ + pcireg hop_unused_30; /* +0x30 */ + pcireg hop_unused_34; /* +0x34 */ + pcireg if_control; /* +0x38 */ + pcireg oatran; /* +0x3C */ + pcireg reset_ctl; /* +0x40 */ + pcireg config_addr; /* +0x44 */ + pcireg hop_unused_48; /* +0x48 */ + pcireg msg_signaled_int_status; /* +0x4C */ + pcireg msg_signaled_int_mask; /* +0x50 */ + pcireg if_status; /* +0x54 */ + pcireg if_mask; /* +0x58 */ + pcireg hop_unused_5C; /* +0x5C */ + pcireg hop_unused_60; /* +0x60 */ + pcireg hop_unused_64; /* +0x64 */ + pcireg hop_unused_68; /* +0x68 */ + pcireg hop_unused_6C; /* +0x6C */ + pcireg hop_unused_70; /* +0x70 */ + + struct pci_block_copy pci_bc[2] __attribute__((aligned(64))); + + pcireg error_hdr1; /* +0xE0 */ + pcireg error_hdr2; /* +0xE4 */ + + pcireg config[config_maxregs] __attribute__((aligned(256))); + +}; + +#define BPCI_CFGADDR_BUSNUM_SHF 16 +#define BPCI_CFGADDR_FUNCTNUM_SHF 8 +#define BPCI_CFGADDR_REGNUM_SHF 2 +#define BPCI_CFGADDR_ENABLE (1<<31) + +#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */ +#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */ +#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */ +#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */ +#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */ +#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */ +#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */ + +#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */ +#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */ +#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */ +#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */ +#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */ +#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */ +#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */ +#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */ +#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */ +#define BPCI_IFSTATUS_SER (1<<19) /* System error */ +#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */ +#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */ +#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */ +#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */ +#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */ +#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */ +#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */ +#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */ +#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */ + +#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */ +#define BPCI_RESETCTL_RT (1<<4) /* Release time */ +#define BPCI_RESETCTL_CT (1<<8) /* Config time */ +#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */ +#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */ +#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */ + +extern struct msp_pci_regs msp_pci_regs + __attribute__((section(".register"))); +extern unsigned long msp_pci_config_space + __attribute__((section(".register"))); + +#endif /* !_MSP_PCI_H_ */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h new file mode 100644 index 000000000000..14ca7dc382a8 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h @@ -0,0 +1,176 @@ +/* + * MIPS boards bootprom interface for the Linux kernel. + * + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Author: Carsten Langgaard, carstenl@mips.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#ifndef _ASM_MSP_PROM_H +#define _ASM_MSP_PROM_H + +#include + +#define DEVICEID "deviceid" +#define FEATURES "features" +#define PROM_ENV "prom_env" +#define PROM_ENV_FILE "/proc/"PROM_ENV +#define PROM_ENV_SIZE 256 + +#define CPU_DEVID_FAMILY 0x0000ff00 +#define CPU_DEVID_REVISION 0x000000ff + +#define FPGA_IS_POLO(revision) \ + (((revision >= 0xb0) && (revision < 0xd0))) +#define FPGA_IS_5000(revision) \ + ((revision >= 0x80) && (revision <= 0x90)) +#define FPGA_IS_ZEUS(revision) ((revision < 0x7f)) +#define FPGA_IS_DUET(revision) \ + (((revision >= 0xa0) && (revision < 0xb0))) +#define FPGA_IS_MSP4200(revision) ((revision >= 0xd0)) +#define FPGA_IS_MSP7100(revision) ((revision >= 0xd0)) + +#define MACHINE_TYPE_POLO "POLO" +#define MACHINE_TYPE_DUET "DUET" +#define MACHINE_TYPE_ZEUS "ZEUS" +#define MACHINE_TYPE_MSP2000REVB "MSP2000REVB" +#define MACHINE_TYPE_MSP5000 "MSP5000" +#define MACHINE_TYPE_MSP4200 "MSP4200" +#define MACHINE_TYPE_MSP7120 "MSP7120" +#define MACHINE_TYPE_MSP7130 "MSP7130" +#define MACHINE_TYPE_OTHER "OTHER" + +#define MACHINE_TYPE_POLO_FPGA "POLO-FPGA" +#define MACHINE_TYPE_DUET_FPGA "DUET-FPGA" +#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA" +#define MACHINE_TYPE_MSP2000REVB_FPGA "MSP2000REVB-FPGA" +#define MACHINE_TYPE_MSP5000_FPGA "MSP5000-FPGA" +#define MACHINE_TYPE_MSP4200_FPGA "MSP4200-FPGA" +#define MACHINE_TYPE_MSP7100_FPGA "MSP7100-FPGA" +#define MACHINE_TYPE_OTHER_FPGA "OTHER-FPGA" + +/* Device Family definitions */ +#define FAMILY_FPGA 0x0000 +#define FAMILY_ZEUS 0x1000 +#define FAMILY_POLO 0x2000 +#define FAMILY_DUET 0x4000 +#define FAMILY_TRIAD 0x5000 +#define FAMILY_MSP4200 0x4200 +#define FAMILY_MSP4200_FPGA 0x4f00 +#define FAMILY_MSP7100 0x7100 +#define FAMILY_MSP7100_FPGA 0x7f00 + +/* Device Type definitions */ +#define TYPE_MSP7120 0x7120 +#define TYPE_MSP7130 0x7130 + +#define ENET_KEY 'E' +#define ENETTXD_KEY 'e' +#define PCI_KEY 'P' +#define PCIMUX_KEY 'p' +#define SEC_KEY 'S' +#define SPAD_KEY 'D' +#define TDM_KEY 'T' +#define ZSP_KEY 'Z' + +#define FEATURE_NOEXIST '-' +#define FEATURE_EXIST '+' + +#define ENET_MII 'M' +#define ENET_RMII 'R' + +#define ENETTXD_FALLING 'F' +#define ENETTXD_RISING 'R' + +#define PCI_HOST 'H' +#define PCI_PERIPHERAL 'P' + +#define PCIMUX_FULL 'F' +#define PCIMUX_SINGLE 'S' + +#define SEC_DUET 'D' +#define SEC_POLO 'P' +#define SEC_SLOW 'S' +#define SEC_TRIAD 'T' + +#define SPAD_POLO 'P' + +#define TDM_DUET 'D' /* DUET TDMs might exist */ +#define TDM_POLO 'P' /* POLO TDMs might exist */ +#define TDM_TRIAD 'T' /* TRIAD TDMs might exist */ + +#define ZSP_DUET 'D' /* one DUET zsp engine */ +#define ZSP_TRIAD 'T' /* two TRIAD zsp engines */ + +extern char *prom_getcmdline(void); +extern char *prom_getenv(char *name); +extern void prom_init_cmdline(void); +extern void prom_meminit(void); +extern void prom_fixup_mem_map(unsigned long start_mem, + unsigned long end_mem); + +#ifdef CONFIG_MTD_PMC_MSP_RAMROOT +extern bool get_ramroot(void **start, unsigned long *size); +#endif + +extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr); +extern unsigned long get_deviceid(void); +extern char identify_enet(unsigned long interface_num); +extern char identify_enetTxD(unsigned long interface_num); +extern char identify_pci(void); +extern char identify_sec(void); +extern char identify_spad(void); +extern char identify_sec(void); +extern char identify_tdm(void); +extern char identify_zsp(void); +extern unsigned long identify_family(void); +extern unsigned long identify_revision(void); + +/* + * The following macro calls prom_printf and puts the format string + * into an init section so it can be reclaimed. + */ +#define ppfinit(f, x...) \ + do { \ + static char _f[] __initdata = KERN_INFO f; \ + printk(_f, ## x); \ + } while (0) + +/* Memory descriptor management. */ +#define PROM_MAX_PMEMBLOCKS 7 /* 6 used */ + +enum yamon_memtypes { + yamon_dontuse, + yamon_prom, + yamon_free, +}; + +struct prom_pmemblock { + unsigned long base; /* Within KSEG0. */ + unsigned int size; /* In bytes. */ + unsigned int type; /* free or prom memory */ +}; + +extern int prom_argc; +extern char **prom_argv; +extern char **prom_envp; +extern int *prom_vec; +extern struct prom_pmemblock *prom_getmdesc(void); + +#endif /* !_ASM_MSP_PROM_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h new file mode 100644 index 000000000000..60a5a38dd5b2 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h @@ -0,0 +1,236 @@ +/* + * SMP/VPE-safe functions to access "registers" (see note). + * + * NOTES: +* - These macros use ll/sc instructions, so it is your responsibility to + * ensure these are available on your platform before including this file. + * - The MIPS32 spec states that ll/sc results are undefined for uncached + * accesses. This means they can't be used on HW registers accessed + * through kseg1. Code which requires these macros for this purpose must + * front-end the registers with cached memory "registers" and have a single + * thread update the actual HW registers. + * - A maximum of 2k of code can be inserted between ll and sc. Every + * memory accesses between the instructions will increase the chance of + * sc failing and having to loop. + * - When using custom_read_reg32/custom_write_reg32 only perform the + * necessary logical operations on the register value in between these + * two calls. All other logic should be performed before the first call. + * - There is a bug on the R10000 chips which has a workaround. If you + * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR' + * to be non-zero. If you are using this header from within linux, you may + * include before including this file to have this defined + * appropriately for you. + * + * Copyright 2005-2007 PMC-Sierra, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO + * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., 675 + * Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_REGOPS_H__ +#define __ASM_REGOPS_H__ + +#include + +#include + +#ifndef R10000_LLSC_WAR +#define R10000_LLSC_WAR 0 +#endif + +#if R10000_LLSC_WAR == 1 +#define __beqz "beqzl " +#else +#define __beqz "beqz " +#endif + +#ifndef _LINUX_TYPES_H +typedef unsigned int u32; +#endif + +/* + * Sets all the masked bits to the corresponding value bits + */ +static inline void set_value_reg32(volatile u32 *const addr, + u32 const mask, + u32 const value) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set mips3 \n" + "1: ll %0, %1 # set_value_reg32 \n" + " and %0, %2 \n" + " or %0, %3 \n" + " sc %0, %1 \n" + " "__beqz"%0, 1b \n" + " nop \n" + " .set pop \n" + : "=&r" (temp), "=m" (*addr) + : "ir" (~mask), "ir" (value), "m" (*addr)); +} + +/* + * Sets all the masked bits to '1' + */ +static inline void set_reg32(volatile u32 *const addr, + u32 const mask) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set mips3 \n" + "1: ll %0, %1 # set_reg32 \n" + " or %0, %2 \n" + " sc %0, %1 \n" + " "__beqz"%0, 1b \n" + " nop \n" + " .set pop \n" + : "=&r" (temp), "=m" (*addr) + : "ir" (mask), "m" (*addr)); +} + +/* + * Sets all the masked bits to '0' + */ +static inline void clear_reg32(volatile u32 *const addr, + u32 const mask) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set mips3 \n" + "1: ll %0, %1 # clear_reg32 \n" + " and %0, %2 \n" + " sc %0, %1 \n" + " "__beqz"%0, 1b \n" + " nop \n" + " .set pop \n" + : "=&r" (temp), "=m" (*addr) + : "ir" (~mask), "m" (*addr)); +} + +/* + * Toggles all masked bits from '0' to '1' and '1' to '0' + */ +static inline void toggle_reg32(volatile u32 *const addr, + u32 const mask) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set mips3 \n" + "1: ll %0, %1 # toggle_reg32 \n" + " xor %0, %2 \n" + " sc %0, %1 \n" + " "__beqz"%0, 1b \n" + " nop \n" + " .set pop \n" + : "=&r" (temp), "=m" (*addr) + : "ir" (mask), "m" (*addr)); +} + +/* + * Read all masked bits others are returned as '0' + */ +static inline u32 read_reg32(volatile u32 *const addr, + u32 const mask) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " lw %0, %1 # read \n" + " and %0, %2 # mask \n" + " .set pop \n" + : "=&r" (temp) + : "m" (*addr), "ir" (mask)); + + return temp; +} + +/* + * blocking_read_reg32 - Read address with blocking load + * + * Uncached writes need to be read back to ensure they reach RAM. + * The returned value must be 'used' to prevent from becoming a + * non-blocking load. + */ +static inline u32 blocking_read_reg32(volatile u32 *const addr) +{ + u32 temp; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " lw %0, %1 # read \n" + " move %0, %0 # block \n" + " .set pop \n" + : "=&r" (temp) + : "m" (*addr)); + + return temp; +} + +/* + * For special strange cases only: + * + * If you need custom processing within a ll/sc loop, use the following macros + * VERY CAREFULLY: + * + * u32 tmp; <-- Define a variable to hold the data + * + * custom_read_reg32(address, tmp); <-- Reads the address and put the value + * in the 'tmp' variable given + * + * From here on out, you are (basicly) atomic, so don't do anything too + * fancy! + * Also, this code may loop if the end of this block fails to write + * everything back safely due do the other CPU, so do NOT do anything + * with side-effects! + * + * custom_write_reg32(address, tmp); <-- Writes back 'tmp' safely. + */ +#define custom_read_reg32(address, tmp) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set mips3 \n" \ + "1: ll %0, %1 #custom_read_reg32 \n" \ + " .set pop \n" \ + : "=r" (tmp), "=m" (*address) \ + : "m" (*address)) + +#define custom_write_reg32(address, tmp) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set mips3 \n" \ + " sc %0, %1 #custom_write_reg32 \n" \ + " "__beqz"%0, 1b \n" \ + " nop \n" \ + " .set pop \n" \ + : "=&r" (tmp), "=m" (*address) \ + : "0" (tmp), "m" (*address)) + +#endif /* __ASM_REGOPS_H__ */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h new file mode 100644 index 000000000000..603eb737b4a8 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h @@ -0,0 +1,663 @@ +/* + * Defines for the address space, registers and register configuration + * (bit masks, access macros etc) for the PMC-Sierra line of MSP products. + * This file contains addess maps for all the devices in the line of + * products but only has register definitions and configuration masks for + * registers which aren't definitely associated with any device. Things + * like clock settings, reset access, the ELB etc. Individual device + * drivers will reference the appropriate XXX_BASE value defined here + * and have individual registers offset from that. + * + * Copyright (C) 2005-2007 PMC-Sierra, Inc. All rights reserved. + * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#include +#include + +#ifndef _ASM_MSP_REGS_H +#define _ASM_MSP_REGS_H + +/* + ######################################################################## + # Address space and device base definitions # + ######################################################################## + */ + +/* + *************************************************************************** + * System Logic and Peripherals (ELB, UART0, etc) device address space * + *************************************************************************** + */ +#define MSP_SLP_BASE 0x1c000000 + /* System Logic and Peripherals */ +#define MSP_RST_BASE (MSP_SLP_BASE + 0x10) + /* System reset register base */ +#define MSP_RST_SIZE 0x0C /* System reset register space */ + +#define MSP_WTIMER_BASE (MSP_SLP_BASE + 0x04C) + /* watchdog timer base */ +#define MSP_ITIMER_BASE (MSP_SLP_BASE + 0x054) + /* internal timer base */ +#define MSP_UART0_BASE (MSP_SLP_BASE + 0x100) + /* UART0 controller base */ +#define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120) + /* Block Copy controller base */ +#define MSP_BCPY_DESC_BASE (MSP_SLP_BASE + 0x160) + /* Block Copy descriptor base */ + +/* + *************************************************************************** + * PCI address space * + *************************************************************************** + */ +#define MSP_PCI_BASE 0x19000000 + +/* + *************************************************************************** + * MSbus device address space * + *************************************************************************** + */ +#define MSP_MSB_BASE 0x18000000 + /* MSbus address start */ +#define MSP_PER_BASE (MSP_MSB_BASE + 0x400000) + /* Peripheral device registers */ +#define MSP_MAC0_BASE (MSP_MSB_BASE + 0x600000) + /* MAC A device registers */ +#define MSP_MAC1_BASE (MSP_MSB_BASE + 0x700000) + /* MAC B device registers */ +#define MSP_MAC_SIZE 0xE0 /* MAC register space */ + +#define MSP_SEC_BASE (MSP_MSB_BASE + 0x800000) + /* Security Engine registers */ +#define MSP_MAC2_BASE (MSP_MSB_BASE + 0x900000) + /* MAC C device registers */ +#define MSP_ADSL2_BASE (MSP_MSB_BASE + 0xA80000) + /* ADSL2 device registers */ +#define MSP_USB_BASE (MSP_MSB_BASE + 0xB40000) + /* USB device registers */ +#define MSP_USB_BASE_START (MSP_MSB_BASE + 0xB40100) + /* USB device registers */ +#define MSP_USB_BASE_END (MSP_MSB_BASE + 0xB401FF) + /* USB device registers */ +#define MSP_CPUIF_BASE (MSP_MSB_BASE + 0xC00000) + /* CPU interface registers */ + +/* Devices within the MSbus peripheral block */ +#define MSP_UART1_BASE (MSP_PER_BASE + 0x030) + /* UART1 controller base */ +#define MSP_SPI_BASE (MSP_PER_BASE + 0x058) + /* SPI/MPI control registers */ +#define MSP_TWI_BASE (MSP_PER_BASE + 0x090) + /* Two-wire control registers */ +#define MSP_PTIMER_BASE (MSP_PER_BASE + 0x0F0) + /* Programmable timer control */ + +/* + *************************************************************************** + * Physical Memory configuration address space * + *************************************************************************** + */ +#define MSP_MEM_CFG_BASE 0x17f00000 + +#define MSP_MEM_INDIRECT_CTL_10 0x10 + +/* + * Notes: + * 1) The SPI registers are split into two blocks, one offset from the + * MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by + * 0x68. The SPI driver definitions for the register must be aware + * of this. + * 2) The block copy engine register are divided into two regions, one + * for the control/configuration of the engine proper and one for the + * values of the descriptors used in the copy process. These have + * different base defines (CTRL_BASE vs DESC_BASE) + * 3) These constants are for physical addresses which means that they + * work correctly with "ioremap" and friends. This means that device + * drivers will need to remap these addresses using ioremap and perhaps + * the readw/writew macros. Or they could use the regptr() macro + * defined below, but the readw/writew calls are the correct thing. + * 4) The UARTs have an additional status register offset from the base + * address. This register isn't used in the standard 8250 driver but + * may be used in other software. Consult the hardware datasheet for + * offset details. + * 5) For some unknown reason the security engine (MSP_SEC_BASE) registers + * start at an offset of 0x84 from the base address but the block of + * registers before this is reserved for the security engine. The + * driver will have to be aware of this but it makes the register + * definitions line up better with the documentation. + */ + +/* + ######################################################################## + # System register definitions. Not associated with a specific device # + ######################################################################## + */ + +/* + * This macro maps the physical register number into uncached space + * and (for C code) casts it into a u32 pointer so it can be dereferenced + * Normally these would be accessed with ioremap and readX/writeX, but + * these are convenient for a lot of internal kernel code. + */ +#ifdef __ASSEMBLER__ + #define regptr(addr) (KSEG1ADDR(addr)) +#else + #define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr))) +#endif + +/* + *************************************************************************** + * System Logic and Peripherals (RESET, ELB, etc) registers * + *************************************************************************** + */ + +/* System Control register definitions */ +#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00) + /* Device-ID RO */ +#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04) + /* Firmware-ID Register RW */ +#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08) + /* System-ID Register-0 RW */ +#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C) + /* System-ID Register-1 RW */ + +/* System Reset register definitions */ +#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10) + /* System Reset Status RO */ +#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14) + /* System Set Reset WO */ +#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18) + /* System Clear Reset WO */ + +/* System Clock Registers */ +#define PCI_SLP_REG regptr(MSP_SLP_BASE + 0x1C) + /* PCI clock generator RW */ +#define URT_SLP_REG regptr(MSP_SLP_BASE + 0x20) + /* UART clock generator RW */ +/* reserved (MSP_SLP_BASE + 0x24) */ +/* reserved (MSP_SLP_BASE + 0x28) */ +#define PLL1_SLP_REG regptr(MSP_SLP_BASE + 0x2C) + /* PLL1 clock generator RW */ +#define PLL0_SLP_REG regptr(MSP_SLP_BASE + 0x30) + /* PLL0 clock generator RW */ +#define MIPS_SLP_REG regptr(MSP_SLP_BASE + 0x34) + /* MIPS clock generator RW */ +#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38) + /* Voice Eng clock generator RW */ +/* reserved (MSP_SLP_BASE + 0x3C) */ +#define MSB_SLP_REG regptr(MSP_SLP_BASE + 0x40) + /* MS-Bus clock generator RW */ +#define SMAC_SLP_REG regptr(MSP_SLP_BASE + 0x44) + /* Sec & MAC clock generator RW */ +#define PERF_SLP_REG regptr(MSP_SLP_BASE + 0x48) + /* Per & TDM clock generator RW */ + +/* Interrupt Controller Registers */ +#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70) + /* Interrupt status register RW */ +#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74) + /* Interrupt enable/mask RW */ +#define SE_MBOX_REG regptr(MSP_SLP_BASE + 0x78) + /* Security Engine mailbox RW */ +#define VE_MBOX_REG regptr(MSP_SLP_BASE + 0x7C) + /* Voice Engine mailbox RW */ + +/* ELB Controller Registers */ +#define CS0_CNFG_REG regptr(MSP_SLP_BASE + 0x80) + /* ELB CS0 Configuration Reg */ +#define CS0_ADDR_REG regptr(MSP_SLP_BASE + 0x84) + /* ELB CS0 Base Address Reg */ +#define CS0_MASK_REG regptr(MSP_SLP_BASE + 0x88) + /* ELB CS0 Mask Register */ +#define CS0_ACCESS_REG regptr(MSP_SLP_BASE + 0x8C) + /* ELB CS0 access register */ + +#define CS1_CNFG_REG regptr(MSP_SLP_BASE + 0x90) + /* ELB CS1 Configuration Reg */ +#define CS1_ADDR_REG regptr(MSP_SLP_BASE + 0x94) + /* ELB CS1 Base Address Reg */ +#define CS1_MASK_REG regptr(MSP_SLP_BASE + 0x98) + /* ELB CS1 Mask Register */ +#define CS1_ACCESS_REG regptr(MSP_SLP_BASE + 0x9C) + /* ELB CS1 access register */ + +#define CS2_CNFG_REG regptr(MSP_SLP_BASE + 0xA0) + /* ELB CS2 Configuration Reg */ +#define CS2_ADDR_REG regptr(MSP_SLP_BASE + 0xA4) + /* ELB CS2 Base Address Reg */ +#define CS2_MASK_REG regptr(MSP_SLP_BASE + 0xA8) + /* ELB CS2 Mask Register */ +#define CS2_ACCESS_REG regptr(MSP_SLP_BASE + 0xAC) + /* ELB CS2 access register */ + +#define CS3_CNFG_REG regptr(MSP_SLP_BASE + 0xB0) + /* ELB CS3 Configuration Reg */ +#define CS3_ADDR_REG regptr(MSP_SLP_BASE + 0xB4) + /* ELB CS3 Base Address Reg */ +#define CS3_MASK_REG regptr(MSP_SLP_BASE + 0xB8) + /* ELB CS3 Mask Register */ +#define CS3_ACCESS_REG regptr(MSP_SLP_BASE + 0xBC) + /* ELB CS3 access register */ + +#define CS4_CNFG_REG regptr(MSP_SLP_BASE + 0xC0) + /* ELB CS4 Configuration Reg */ +#define CS4_ADDR_REG regptr(MSP_SLP_BASE + 0xC4) + /* ELB CS4 Base Address Reg */ +#define CS4_MASK_REG regptr(MSP_SLP_BASE + 0xC8) + /* ELB CS4 Mask Register */ +#define CS4_ACCESS_REG regptr(MSP_SLP_BASE + 0xCC) + /* ELB CS4 access register */ + +#define CS5_CNFG_REG regptr(MSP_SLP_BASE + 0xD0) + /* ELB CS5 Configuration Reg */ +#define CS5_ADDR_REG regptr(MSP_SLP_BASE + 0xD4) + /* ELB CS5 Base Address Reg */ +#define CS5_MASK_REG regptr(MSP_SLP_BASE + 0xD8) + /* ELB CS5 Mask Register */ +#define CS5_ACCESS_REG regptr(MSP_SLP_BASE + 0xDC) + /* ELB CS5 access register */ + +/* reserved 0xE0 - 0xE8 */ +#define ELB_1PC_EN_REG regptr(MSP_SLP_BASE + 0xEC) + /* ELB single PC card detect */ + +/* reserved 0xF0 - 0xF8 */ +#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC) + /* SDRAM read/ELB timing Reg */ + +/* Extended UART status registers */ +#define UART0_STATUS_REG regptr(MSP_UART0_BASE + 0x0c0) + /* UART Status Register 0 */ +#define UART1_STATUS_REG regptr(MSP_UART1_BASE + 0x170) + /* UART Status Register 1 */ + +/* Performance monitoring registers */ +#define PERF_MON_CTRL_REG regptr(MSP_SLP_BASE + 0x140) + /* Performance monitor control */ +#define PERF_MON_CLR_REG regptr(MSP_SLP_BASE + 0x144) + /* Performance monitor clear */ +#define PERF_MON_CNTH_REG regptr(MSP_SLP_BASE + 0x148) + /* Perf monitor counter high */ +#define PERF_MON_CNTL_REG regptr(MSP_SLP_BASE + 0x14C) + /* Perf monitor counter low */ + +/* System control registers */ +#define SYS_CTRL_REG regptr(MSP_SLP_BASE + 0x150) + /* System control register */ +#define SYS_ERR1_REG regptr(MSP_SLP_BASE + 0x154) + /* System Error status 1 */ +#define SYS_ERR2_REG regptr(MSP_SLP_BASE + 0x158) + /* System Error status 2 */ +#define SYS_INT_CFG_REG regptr(MSP_SLP_BASE + 0x15C) + /* System Interrupt config */ + +/* Voice Engine Memory configuration */ +#define VE_MEM_REG regptr(MSP_SLP_BASE + 0x17C) + /* Voice engine memory config */ + +/* CPU/SLP Error Status registers */ +#define CPU_ERR1_REG regptr(MSP_SLP_BASE + 0x180) + /* CPU/SLP Error status 1 */ +#define CPU_ERR2_REG regptr(MSP_SLP_BASE + 0x184) + /* CPU/SLP Error status 1 */ + +#define EXTENDED_GPIO_REG regptr(MSP_SLP_BASE + 0x188) + /* Extended GPIO register */ + +/* System Error registers */ +#define SLP_ERR_STS_REG regptr(MSP_SLP_BASE + 0x190) + /* Int status for SLP errors */ +#define SLP_ERR_MSK_REG regptr(MSP_SLP_BASE + 0x194) + /* Int mask for SLP errors */ +#define SLP_ELB_ERST_REG regptr(MSP_SLP_BASE + 0x198) + /* External ELB reset */ +#define SLP_BOOT_STS_REG regptr(MSP_SLP_BASE + 0x19C) + /* Boot Status */ + +/* Extended ELB addressing */ +#define CS0_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A0) + /* CS0 Extended address */ +#define CS1_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A4) + /* CS1 Extended address */ +#define CS2_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A8) + /* CS2 Extended address */ +#define CS3_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1AC) + /* CS3 Extended address */ +/* reserved 0x1B0 */ +#define CS5_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1B4) + /* CS5 Extended address */ + +/* PLL Adjustment registers */ +#define PLL_LOCK_REG regptr(MSP_SLP_BASE + 0x200) + /* PLL0 lock status */ +#define PLL_ARST_REG regptr(MSP_SLP_BASE + 0x204) + /* PLL Analog reset status */ +#define PLL0_ADJ_REG regptr(MSP_SLP_BASE + 0x208) + /* PLL0 Adjustment value */ +#define PLL1_ADJ_REG regptr(MSP_SLP_BASE + 0x20C) + /* PLL1 Adjustment value */ + +/* + *************************************************************************** + * Peripheral Register definitions * + *************************************************************************** + */ + +/* Peripheral status */ +#define PER_CTRL_REG regptr(MSP_PER_BASE + 0x50) + /* Peripheral control register */ +#define PER_STS_REG regptr(MSP_PER_BASE + 0x54) + /* Peripheral status register */ + +/* SPI/MPI Registers */ +#define SMPI_TX_SZ_REG regptr(MSP_PER_BASE + 0x58) + /* SPI/MPI Tx Size register */ +#define SMPI_RX_SZ_REG regptr(MSP_PER_BASE + 0x5C) + /* SPI/MPI Rx Size register */ +#define SMPI_CTL_REG regptr(MSP_PER_BASE + 0x60) + /* SPI/MPI Control register */ +#define SMPI_MS_REG regptr(MSP_PER_BASE + 0x64) + /* SPI/MPI Chip Select reg */ +#define SMPI_CORE_DATA_REG regptr(MSP_PER_BASE + 0xC0) + /* SPI/MPI Core Data reg */ +#define SMPI_CORE_CTRL_REG regptr(MSP_PER_BASE + 0xC4) + /* SPI/MPI Core Control reg */ +#define SMPI_CORE_STAT_REG regptr(MSP_PER_BASE + 0xC8) + /* SPI/MPI Core Status reg */ +#define SMPI_CORE_SSEL_REG regptr(MSP_PER_BASE + 0xCC) + /* SPI/MPI Core Ssel reg */ +#define SMPI_FIFO_REG regptr(MSP_PER_BASE + 0xD0) + /* SPI/MPI Data FIFO reg */ + +/* Peripheral Block Error Registers */ +#define PER_ERR_STS_REG regptr(MSP_PER_BASE + 0x70) + /* Error Bit Status Register */ +#define PER_ERR_MSK_REG regptr(MSP_PER_BASE + 0x74) + /* Error Bit Mask Register */ +#define PER_HDR1_REG regptr(MSP_PER_BASE + 0x78) + /* Error Header 1 Register */ +#define PER_HDR2_REG regptr(MSP_PER_BASE + 0x7C) + /* Error Header 2 Register */ + +/* Peripheral Block Interrupt Registers */ +#define PER_INT_STS_REG regptr(MSP_PER_BASE + 0x80) + /* Interrupt status register */ +#define PER_INT_MSK_REG regptr(MSP_PER_BASE + 0x84) + /* Interrupt Mask Register */ +#define GPIO_INT_STS_REG regptr(MSP_PER_BASE + 0x88) + /* GPIO interrupt status reg */ +#define GPIO_INT_MSK_REG regptr(MSP_PER_BASE + 0x8C) + /* GPIO interrupt MASK Reg */ + +/* POLO GPIO registers */ +#define POLO_GPIO_DAT1_REG regptr(MSP_PER_BASE + 0x0E0) + /* Polo GPIO[8:0] data reg */ +#define POLO_GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x0E4) + /* Polo GPIO[7:0] config reg */ +#define POLO_GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x0E8) + /* Polo GPIO[15:8] config reg */ +#define POLO_GPIO_OD1_REG regptr(MSP_PER_BASE + 0x0EC) + /* Polo GPIO[31:0] output drive */ +#define POLO_GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x170) + /* Polo GPIO[23:16] config reg */ +#define POLO_GPIO_DAT2_REG regptr(MSP_PER_BASE + 0x174) + /* Polo GPIO[15:9] data reg */ +#define POLO_GPIO_DAT3_REG regptr(MSP_PER_BASE + 0x178) + /* Polo GPIO[23:16] data reg */ +#define POLO_GPIO_DAT4_REG regptr(MSP_PER_BASE + 0x17C) + /* Polo GPIO[31:24] data reg */ +#define POLO_GPIO_DAT5_REG regptr(MSP_PER_BASE + 0x180) + /* Polo GPIO[39:32] data reg */ +#define POLO_GPIO_DAT6_REG regptr(MSP_PER_BASE + 0x184) + /* Polo GPIO[47:40] data reg */ +#define POLO_GPIO_DAT7_REG regptr(MSP_PER_BASE + 0x188) + /* Polo GPIO[54:48] data reg */ +#define POLO_GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) + /* Polo GPIO[31:24] config reg */ +#define POLO_GPIO_CFG5_REG regptr(MSP_PER_BASE + 0x190) + /* Polo GPIO[39:32] config reg */ +#define POLO_GPIO_CFG6_REG regptr(MSP_PER_BASE + 0x194) + /* Polo GPIO[47:40] config reg */ +#define POLO_GPIO_CFG7_REG regptr(MSP_PER_BASE + 0x198) + /* Polo GPIO[54:48] config reg */ +#define POLO_GPIO_OD2_REG regptr(MSP_PER_BASE + 0x19C) + /* Polo GPIO[54:32] output drive */ + +/* Generic GPIO registers */ +#define GPIO_DATA1_REG regptr(MSP_PER_BASE + 0x170) + /* GPIO[1:0] data register */ +#define GPIO_DATA2_REG regptr(MSP_PER_BASE + 0x174) + /* GPIO[5:2] data register */ +#define GPIO_DATA3_REG regptr(MSP_PER_BASE + 0x178) + /* GPIO[9:6] data register */ +#define GPIO_DATA4_REG regptr(MSP_PER_BASE + 0x17C) + /* GPIO[15:10] data register */ +#define GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x180) + /* GPIO[1:0] config register */ +#define GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x184) + /* GPIO[5:2] config register */ +#define GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x188) + /* GPIO[9:6] config register */ +#define GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) + /* GPIO[15:10] config register */ +#define GPIO_OD_REG regptr(MSP_PER_BASE + 0x190) + /* GPIO[15:0] output drive */ + +/* + *************************************************************************** + * CPU Interface register definitions * + *************************************************************************** + */ +#define PCI_FLUSH_REG regptr(MSP_CPUIF_BASE + 0x00) + /* PCI-SDRAM queue flush trigger */ +#define OCP_ERR1_REG regptr(MSP_CPUIF_BASE + 0x04) + /* OCP Error Attribute 1 */ +#define OCP_ERR2_REG regptr(MSP_CPUIF_BASE + 0x08) + /* OCP Error Attribute 2 */ +#define OCP_STS_REG regptr(MSP_CPUIF_BASE + 0x0C) + /* OCP Error Status */ +#define CPUIF_PM_REG regptr(MSP_CPUIF_BASE + 0x10) + /* CPU policy configuration */ +#define CPUIF_CFG_REG regptr(MSP_CPUIF_BASE + 0x10) + /* Misc configuration options */ + +/* Central Interrupt Controller Registers */ +#define MSP_CIC_BASE (MSP_CPUIF_BASE + 0x8000) + /* Central Interrupt registers */ +#define CIC_EXT_CFG_REG regptr(MSP_CIC_BASE + 0x00) + /* External interrupt config */ +#define CIC_STS_REG regptr(MSP_CIC_BASE + 0x04) + /* CIC Interrupt Status */ +#define CIC_VPE0_MSK_REG regptr(MSP_CIC_BASE + 0x08) + /* VPE0 Interrupt Mask */ +#define CIC_VPE1_MSK_REG regptr(MSP_CIC_BASE + 0x0C) + /* VPE1 Interrupt Mask */ +#define CIC_TC0_MSK_REG regptr(MSP_CIC_BASE + 0x10) + /* Thread Context 0 Int Mask */ +#define CIC_TC1_MSK_REG regptr(MSP_CIC_BASE + 0x14) + /* Thread Context 1 Int Mask */ +#define CIC_TC2_MSK_REG regptr(MSP_CIC_BASE + 0x18) + /* Thread Context 2 Int Mask */ +#define CIC_TC3_MSK_REG regptr(MSP_CIC_BASE + 0x18) + /* Thread Context 3 Int Mask */ +#define CIC_TC4_MSK_REG regptr(MSP_CIC_BASE + 0x18) + /* Thread Context 4 Int Mask */ +#define CIC_PCIMSI_STS_REG regptr(MSP_CIC_BASE + 0x18) +#define CIC_PCIMSI_MSK_REG regptr(MSP_CIC_BASE + 0x18) +#define CIC_PCIFLSH_REG regptr(MSP_CIC_BASE + 0x18) +#define CIC_VPE0_SWINT_REG regptr(MSP_CIC_BASE + 0x08) + + +/* + *************************************************************************** + * Memory controller registers * + *************************************************************************** + */ +#define MEM_CFG1_REG regptr(MSP_MEM_CFG_BASE + 0x00) +#define MEM_SS_ADDR regptr(MSP_MEM_CFG_BASE + 0x00) +#define MEM_SS_DATA regptr(MSP_MEM_CFG_BASE + 0x04) +#define MEM_SS_WRITE regptr(MSP_MEM_CFG_BASE + 0x08) + +/* + *************************************************************************** + * PCI controller registers * + *************************************************************************** + */ +#define PCI_BASE_REG regptr(MSP_PCI_BASE + 0x00) +#define PCI_CONFIG_SPACE_REG regptr(MSP_PCI_BASE + 0x800) +#define PCI_JTAG_DEVID_REG regptr(MSP_SLP_BASE + 0x13c) + +/* + ######################################################################## + # Register content & macro definitions # + ######################################################################## + */ + +/* + *************************************************************************** + * DEV_ID defines * + *************************************************************************** + */ +#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */ +#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */ +#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */ +#define DEV_ID_FAMILY (0xff << 8) /* family ID code */ +#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */ + +#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */ +#define MSP5000_ID (0x50 << 8) +#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */ +#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */ +#define MSP4200_ID (0x42 << 8) +#define MSP4000_ID (0x40 << 8) +#define MSP2XXX_ID (0x20 << 8) +#define MSPZEUS_ID (0x10 << 8) + +#define MSP2004_SUB_ID (0x0 << 16) +#define MSP2005_SUB_ID (0x1 << 16) +#define MSP2006_SUB_ID (0x1 << 16) +#define MSP2007_SUB_ID (0x2 << 16) +#define MSP2010_SUB_ID (0x3 << 16) +#define MSP2015_SUB_ID (0x4 << 16) +#define MSP2020_SUB_ID (0x5 << 16) +#define MSP2100_SUB_ID (0x6 << 16) + +/* + *************************************************************************** + * RESET defines * + *************************************************************************** + */ +#define MSP_GR_RST (0x01 << 0) /* Global reset bit */ +#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */ +#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */ +#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */ +/* reserved */ +#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */ +#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */ +#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */ +#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */ +#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */ +#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */ +#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */ +#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */ +#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */ + +/* + *************************************************************************** + * UART defines * + *************************************************************************** + */ +#define MSP_BASE_BAUD 25000000 +#define MSP_UART_REG_LEN 0x20 + +/* + *************************************************************************** + * ELB defines * + *************************************************************************** + */ +#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */ +#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */ + +/* + *************************************************************************** + * CIC defines * + *************************************************************************** + */ + +/* CIC_EXT_CFG_REG */ +#define EXT_INT_POL(eirq) (1 << (eirq + 8)) +#define EXT_INT_EDGE(eirq) (1 << eirq) + +#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq) (reg &= ~EXT_INT_EDGE(eirq)) +#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq) (reg |= EXT_INT_EDGE(eirq)) +#define CIC_EXT_SET_ACTIVE_HI(reg, eirq) (reg |= EXT_INT_POL(eirq)) +#define CIC_EXT_SET_ACTIVE_LO(reg, eirq) (reg &= ~EXT_INT_POL(eirq)) +#define CIC_EXT_SET_ACTIVE_RISING CIC_EXT_SET_ACTIVE_HI +#define CIC_EXT_SET_ACTIVE_FALLING CIC_EXT_SET_ACTIVE_LO + +#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \ + ((reg & EXT_INT_EDGE(eirq)) == 0) +#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq) (reg & EXT_INT_EDGE(eirq)) +#define CIC_EXT_IS_ACTIVE_HI(reg, eirq) (reg & EXT_INT_POL(eirq)) +#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \ + ((reg & EXT_INT_POL(eirq)) == 0) +#define CIC_EXT_IS_ACTIVE_RISING CIC_EXT_IS_ACTIVE_HI +#define CIC_EXT_IS_ACTIVE_FALLING CIC_EXT_IS_ACTIVE_LO + +/* + *************************************************************************** + * Memory Controller defines * + *************************************************************************** + */ + +/* Indirect memory controller registers */ +#define DDRC_CFG(n) (n) +#define DDRC_DEBUG(n) (0x04 + n) +#define DDRC_CTL(n) (0x40 + n) + +/* Macro to perform DDRC indirect write */ +#define DDRC_INDIRECT_WRITE(reg, mask, value) \ +({ \ + *MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \ + *MEM_SS_DATA = (value); \ + *MEM_SS_WRITE = 1; \ +}) + +/* + *************************************************************************** + * SPI/MPI Mode * + *************************************************************************** + */ +#define SPI_MPI_RX_BUSY 0x00008000 /* SPI/MPI Receive Busy */ +#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */ +#define SPI_MPI_TX_BUSY 0x00002000 /* SPI/MPI Transmit Busy */ +#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */ + +/* + *************************************************************************** + * SPI/MPI Control Register * + *************************************************************************** + */ +#define SPI_MPI_RX_START 0x00000004 /* Start receive command */ +#define SPI_MPI_FLUSH_Q 0x00000002 /* Flush SPI/MPI Queue */ +#define SPI_MPI_TX_START 0x00000001 /* Start Transmit Command */ + +#endif /* !_ASM_MSP_REGS_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h new file mode 100644 index 000000000000..96d4c8ce8c83 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h @@ -0,0 +1,141 @@ +/* + * Defines for the MSP interrupt controller. + * + * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. + * Author: Carsten Langgaard, carstenl@mips.com + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + */ + +#ifndef _MSP_SLP_INT_H +#define _MSP_SLP_INT_H + +/* + * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded + * hierarchical system. The first level are the direct MIPS interrupts + * and are assigned the interrupt range 0-7. The second level is the SLM + * interrupt controller and is assigned the range 8-39. The third level + * comprises the Peripherial block, the PCI block, the PCI MSI block and + * the SLP. The PCI interrupts and the SLP errors are handled by the + * relevant subsystems so the core interrupt code needs only concern + * itself with the Peripheral block. These are assigned interrupts in + * the range 40-71. + */ + +/* + * IRQs directly connected to CPU + */ +#define MSP_MIPS_INTBASE 0 +#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ +#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ +#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ +#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ +#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */ +#define MSP_INT_VE 5 /* IRQ for Voice Engine, C_IRQ3 */ +#define MSP_INT_SLP 6 /* IRQ for SLM block, C_IRQ4 */ +#define MSP_INT_TIMER 7 /* IRQ for the MIPS timer, C_IRQ5 */ + +/* + * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) + * These defines should be tied to the register definition for the SLM + * interrupt routine. For now, just use hard-coded values. + */ +#define MSP_SLP_INTBASE (MSP_MIPS_INTBASE + 8) +#define MSP_INT_EXT0 (MSP_SLP_INTBASE + 0) + /* External interrupt 0 */ +#define MSP_INT_EXT1 (MSP_SLP_INTBASE + 1) + /* External interrupt 1 */ +#define MSP_INT_EXT2 (MSP_SLP_INTBASE + 2) + /* External interrupt 2 */ +#define MSP_INT_EXT3 (MSP_SLP_INTBASE + 3) + /* External interrupt 3 */ +/* Reserved 4-7 */ + +/* + ************************************************************************* + * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER * + * Some MSP produces have this interrupt labelled as Voice and some are * + * SEC mbox ... * + ************************************************************************* + */ +#define MSP_INT_SLP_VE (MSP_SLP_INTBASE + 8) + /* Cascaded IRQ for Voice Engine*/ +#define MSP_INT_SLP_TDM (MSP_SLP_INTBASE + 9) + /* TDM interrupt */ +#define MSP_INT_SLP_MAC0 (MSP_SLP_INTBASE + 10) + /* Cascaded IRQ for MAC 0 */ +#define MSP_INT_SLP_MAC1 (MSP_SLP_INTBASE + 11) + /* Cascaded IRQ for MAC 1 */ +#define MSP_INT_SEC (MSP_SLP_INTBASE + 12) + /* IRQ for security engine */ +#define MSP_INT_PER (MSP_SLP_INTBASE + 13) + /* Peripheral interrupt */ +#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14) + /* SLP timer 0 */ +#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15) + /* SLP timer 1 */ +#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16) + /* SLP timer 2 */ +#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17) + /* Cascaded MIPS timer */ +#define MSP_INT_BLKCP (MSP_SLP_INTBASE + 18) + /* Block Copy */ +#define MSP_INT_UART0 (MSP_SLP_INTBASE + 19) + /* UART 0 */ +#define MSP_INT_PCI (MSP_SLP_INTBASE + 20) + /* PCI subsystem */ +#define MSP_INT_PCI_DBELL (MSP_SLP_INTBASE + 21) + /* PCI doorbell */ +#define MSP_INT_PCI_MSI (MSP_SLP_INTBASE + 22) + /* PCI Message Signal */ +#define MSP_INT_PCI_BC0 (MSP_SLP_INTBASE + 23) + /* PCI Block Copy 0 */ +#define MSP_INT_PCI_BC1 (MSP_SLP_INTBASE + 24) + /* PCI Block Copy 1 */ +#define MSP_INT_SLP_ERR (MSP_SLP_INTBASE + 25) + /* SLP error condition */ +#define MSP_INT_MAC2 (MSP_SLP_INTBASE + 26) + /* IRQ for MAC2 */ +/* Reserved 26-31 */ + +/* + * IRQs cascaded on SLP PER interrupt (MSP_INT_PER) + */ +#define MSP_PER_INTBASE (MSP_SLP_INTBASE + 32) +/* Reserved 0-1 */ +#define MSP_INT_UART1 (MSP_PER_INTBASE + 2) + /* UART 1 */ +/* Reserved 3-5 */ +#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) + /* 2-wire */ +#define MSP_INT_TM0 (MSP_PER_INTBASE + 7) + /* Peripheral timer block out 0 */ +#define MSP_INT_TM1 (MSP_PER_INTBASE + 8) + /* Peripheral timer block out 1 */ +/* Reserved 9 */ +#define MSP_INT_SPRX (MSP_PER_INTBASE + 10) + /* SPI RX complete */ +#define MSP_INT_SPTX (MSP_PER_INTBASE + 11) + /* SPI TX complete */ +#define MSP_INT_GPIO (MSP_PER_INTBASE + 12) + /* GPIO */ +#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) + /* Peripheral error */ +/* Reserved 14-31 */ + +#endif /* !_MSP_SLP_INT_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h new file mode 100644 index 000000000000..0bf48fc1892b --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h @@ -0,0 +1,28 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_PMC_SIERRA_WAR_H +#define __ASM_MIPS_PMC_SIERRA_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \ + defined(CONFIG_PMC_MSP7120_FPGA) +#define MIPS34K_MISSED_ITLB_WAR 1 +#endif + +#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */ diff --git a/arch/mips/include/asm/pmon.h b/arch/mips/include/asm/pmon.h new file mode 100644 index 000000000000..6ad519189ce2 --- /dev/null +++ b/arch/mips/include/asm/pmon.h @@ -0,0 +1,46 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 by Ralf Baechle + * + * The cpustart method is a PMC-Sierra's function to start the secondary CPU. + * Stock PMON 2000 has the smpfork, semlock and semunlock methods instead. + */ +#ifndef _ASM_PMON_H +#define _ASM_PMON_H + +struct callvectors { + int (*open) (char*, int, int); + int (*close) (int); + int (*read) (int, void*, int); + int (*write) (int, void*, int); + off_t (*lseek) (int, off_t, int); + int (*printf) (const char*, ...); + void (*cacheflush) (void); + char* (*gets) (char*); + union { + int (*smpfork) (unsigned long cp, char *sp); + int (*cpustart) (long, void (*)(void), void *, long); + } _s; + int (*semlock) (int sem); + void (*semunlock) (int sem); +}; + +extern struct callvectors *debug_vectors; + +#define pmon_open(name, flags, mode) debug_vectors->open(name, flage, mode) +#define pmon_close(fd) debug_vectors->close(fd) +#define pmon_read(fd, buf, count) debug_vectors->read(fd, buf, count) +#define pmon_write(fd, buf, count) debug_vectors->write(fd, buf, count) +#define pmon_lseek(fd, off, whence) debug_vectors->lseek(fd, off, whence) +#define pmon_printf(fmt...) debug_vectors->printf(fmt) +#define pmon_cacheflush() debug_vectors->cacheflush() +#define pmon_gets(s) debug_vectors->gets(s) +#define pmon_cpustart(n, f, sp, gp) debug_vectors->_s.cpustart(n, f, sp, gp) +#define pmon_smpfork(cp, sp) debug_vectors->_s.smpfork(cp, sp) +#define pmon_semlock(sem) debug_vectors->semlock(sem) +#define pmon_semunlock(sem) debug_vectors->semunlock(sem) + +#endif /* _ASM_PMON_H */ diff --git a/arch/mips/include/asm/poll.h b/arch/mips/include/asm/poll.h new file mode 100644 index 000000000000..47b952080431 --- /dev/null +++ b/arch/mips/include/asm/poll.h @@ -0,0 +1,9 @@ +#ifndef __ASM_POLL_H +#define __ASM_POLL_H + +#define POLLWRNORM POLLOUT +#define POLLWRBAND 0x0100 + +#include + +#endif /* __ASM_POLL_H */ diff --git a/arch/mips/include/asm/posix_types.h b/arch/mips/include/asm/posix_types.h new file mode 100644 index 000000000000..c200102c8586 --- /dev/null +++ b/arch/mips/include/asm/posix_types.h @@ -0,0 +1,144 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 97, 98, 99, 2000 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_POSIX_TYPES_H +#define _ASM_POSIX_TYPES_H + +#include + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned int __kernel_mode_t; +#if (_MIPS_SZLONG == 32) +typedef unsigned long __kernel_nlink_t; +#endif +#if (_MIPS_SZLONG == 64) +typedef unsigned int __kernel_nlink_t; +#endif +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef int __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +#if (_MIPS_SZLONG == 32) +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +#endif +#if (_MIPS_SZLONG == 64) +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef long __kernel_ptrdiff_t; +#endif +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef long __kernel_daddr_t; +typedef char * __kernel_caddr_t; + +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; +typedef __kernel_uid_t __kernel_old_uid_t; +typedef __kernel_gid_t __kernel_old_gid_t; +typedef unsigned int __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if (_MIPS_SZLONG == 32) + long val[2]; +#endif +#if (_MIPS_SZLONG == 64) + int val[2]; +#endif +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) */ + +#endif /* _ASM_POSIX_TYPES_H */ diff --git a/arch/mips/include/asm/prefetch.h b/arch/mips/include/asm/prefetch.h new file mode 100644 index 000000000000..17850834ccb0 --- /dev/null +++ b/arch/mips/include/asm/prefetch.h @@ -0,0 +1,87 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_PREFETCH_H +#define __ASM_PREFETCH_H + + +/* + * R5000 and RM5200 implements pref and prefx instructions but they're nops, so + * rather than wasting time we pretend these processors don't support + * prefetching at all. + * + * R5432 implements Load, Store, LoadStreamed, StoreStreamed, LoadRetained, + * StoreRetained and WriteBackInvalidate but not Pref_PrepareForStore. + * + * Hell (and the book on my shelf I can't open ...) know what the R8000 does. + * + * RM7000 version 1.0 interprets all hints as Pref_Load; version 2.0 implements + * Pref_PrepareForStore also. + * + * RM9000 is MIPS IV but implements prefetching like MIPS32/MIPS64; it's + * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in + * current versions due to erratum G105. + * + * VR7701 only implements the Load prefetch. + * + * Finally MIPS32 and MIPS64 implement all of the following hints. + */ + +#define Pref_Load 0 +#define Pref_Store 1 + /* 2 and 3 are reserved */ +#define Pref_LoadStreamed 4 +#define Pref_StoreStreamed 5 +#define Pref_LoadRetained 6 +#define Pref_StoreRetained 7 + /* 8 ... 24 are reserved */ +#define Pref_WriteBackInvalidate 25 +#define Pref_PrepareForStore 30 + +#ifdef __ASSEMBLY__ + + .macro __pref hint addr +#ifdef CONFIG_CPU_HAS_PREFETCH + pref \hint, \addr +#endif + .endm + + .macro pref_load addr + __pref Pref_Load, \addr + .endm + + .macro pref_store addr + __pref Pref_Store, \addr + .endm + + .macro pref_load_streamed addr + __pref Pref_LoadStreamed, \addr + .endm + + .macro pref_store_streamed addr + __pref Pref_StoreStreamed, \addr + .endm + + .macro pref_load_retained addr + __pref Pref_LoadRetained, \addr + .endm + + .macro pref_store_retained addr + __pref Pref_StoreRetained, \addr + .endm + + .macro pref_wback_inv addr + __pref Pref_WriteBackInvalidate, \addr + .endm + + .macro pref_prepare_for_store addr + __pref Pref_PrepareForStore, \addr + .endm + +#endif + +#endif /* __ASM_PREFETCH_H */ diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h new file mode 100644 index 000000000000..a1e4453469f9 --- /dev/null +++ b/arch/mips/include/asm/processor.h @@ -0,0 +1,263 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 Waldorf GMBH + * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle + * Copyright (C) 1996 Paul M. Antoine + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_PROCESSOR_H +#define _ASM_PROCESSOR_H + +#include +#include + +#include +#include +#include +#include +#include +#include + +/* + * Return current * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +/* + * System setup and hardware flags.. + */ +extern void (*cpu_wait)(void); + +extern unsigned int vced_count, vcei_count; + +#ifdef CONFIG_32BIT +/* + * User space process size: 2GB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. + */ +#define TASK_SIZE 0x7fff8000UL +#define STACK_TOP TASK_SIZE + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE ((TASK_SIZE / 3) & ~(PAGE_SIZE)) +#endif + +#ifdef CONFIG_64BIT +/* + * User space process size: 1TB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. TASK_SIZE + * is limited to 1TB by the R4000 architecture; R10000 and better can + * support 16TB; the architectural reserve for future expansion is + * 8192EB ... + */ +#define TASK_SIZE32 0x7fff8000UL +#define TASK_SIZE 0x10000000000UL +#define STACK_TOP \ + (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE) + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE \ + (test_thread_flag(TIF_32BIT_ADDR) ? \ + PAGE_ALIGN(TASK_SIZE32 / 3) : PAGE_ALIGN(TASK_SIZE / 3)) +#define TASK_SIZE_OF(tsk) \ + (test_tsk_thread_flag(tsk, TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE) +#endif + +#ifdef __KERNEL__ +#define STACK_TOP_MAX TASK_SIZE +#endif + +#define NUM_FPU_REGS 32 + +typedef __u64 fpureg_t; + +/* + * It would be nice to add some more fields for emulator statistics, but there + * are a number of fixed offsets in offset.h and elsewhere that would have to + * be recalculated by hand. So the additional information will be private to + * the FPU emulator for now. See asm-mips/fpu_emulator.h. + */ + +struct mips_fpu_struct { + fpureg_t fpr[NUM_FPU_REGS]; + unsigned int fcr31; +}; + +#define NUM_DSP_REGS 6 + +typedef __u32 dspreg_t; + +struct mips_dsp_state { + dspreg_t dspr[NUM_DSP_REGS]; + unsigned int dspcontrol; +}; + +#define INIT_CPUMASK { \ + {0,} \ +} + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define ARCH_MIN_TASKALIGN 8 + +struct mips_abi; + +/* + * If you change thread_struct remember to change the #defines below too! + */ +struct thread_struct { + /* Saved main processor registers. */ + unsigned long reg16; + unsigned long reg17, reg18, reg19, reg20, reg21, reg22, reg23; + unsigned long reg29, reg30, reg31; + + /* Saved cp0 stuff. */ + unsigned long cp0_status; + + /* Saved fpu/fpu emulator stuff. */ + struct mips_fpu_struct fpu; +#ifdef CONFIG_MIPS_MT_FPAFF + /* Emulated instruction count */ + unsigned long emulated_fp; + /* Saved per-thread scheduler affinity mask */ + cpumask_t user_cpus_allowed; +#endif /* CONFIG_MIPS_MT_FPAFF */ + + /* Saved state of the DSP ASE, if available. */ + struct mips_dsp_state dsp; + + /* Other stuff associated with the thread. */ + unsigned long cp0_badvaddr; /* Last user fault */ + unsigned long cp0_baduaddr; /* Last kernel fault accessing USEG */ + unsigned long error_code; + unsigned long trap_no; + unsigned long irix_trampoline; /* Wheee... */ + unsigned long irix_oldctx; + struct mips_abi *abi; +}; + +#ifdef CONFIG_MIPS_MT_FPAFF +#define FPAFF_INIT \ + .emulated_fp = 0, \ + .user_cpus_allowed = INIT_CPUMASK, +#else +#define FPAFF_INIT +#endif /* CONFIG_MIPS_MT_FPAFF */ + +#define INIT_THREAD { \ + /* \ + * Saved main processor registers \ + */ \ + .reg16 = 0, \ + .reg17 = 0, \ + .reg18 = 0, \ + .reg19 = 0, \ + .reg20 = 0, \ + .reg21 = 0, \ + .reg22 = 0, \ + .reg23 = 0, \ + .reg29 = 0, \ + .reg30 = 0, \ + .reg31 = 0, \ + /* \ + * Saved cp0 stuff \ + */ \ + .cp0_status = 0, \ + /* \ + * Saved FPU/FPU emulator stuff \ + */ \ + .fpu = { \ + .fpr = {0,}, \ + .fcr31 = 0, \ + }, \ + /* \ + * FPU affinity state (null if not FPAFF) \ + */ \ + FPAFF_INIT \ + /* \ + * Saved DSP stuff \ + */ \ + .dsp = { \ + .dspr = {0, }, \ + .dspcontrol = 0, \ + }, \ + /* \ + * Other stuff associated with the process \ + */ \ + .cp0_badvaddr = 0, \ + .cp0_baduaddr = 0, \ + .error_code = 0, \ + .trap_no = 0, \ + .irix_trampoline = 0, \ + .irix_oldctx = 0, \ +} + +struct task_struct; + +/* Free all resources held by a thread. */ +#define release_thread(thread) do { } while(0) + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +extern unsigned long thread_saved_pc(struct task_struct *tsk); + +/* + * Do necessary setup to start up a newly executed thread. + */ +extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp); + +unsigned long get_wchan(struct task_struct *p); + +#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32) +#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk) - 1) +#define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc) +#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29]) +#define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status) + +#define cpu_relax() barrier() + +/* + * Return_address is a replacement for __builtin_return_address(count) + * which on certain architectures cannot reasonably be implemented in GCC + * (MIPS, Alpha) or is unuseable with -fomit-frame-pointer (i386). + * Note that __builtin_return_address(x>=1) is forbidden because GCC + * aborts compilation on some CPUs. It's simply not possible to unwind + * some CPU's stackframes. + * + * __builtin_return_address works only for non-leaf functions. We avoid the + * overhead of a function call by forcing the compiler to save the return + * address register on the stack. + */ +#define return_address() ({__asm__ __volatile__("":::"$31");__builtin_return_address(0);}) + +#ifdef CONFIG_CPU_HAS_PREFETCH + +#define ARCH_HAS_PREFETCH + +static inline void prefetch(const void *addr) +{ + __asm__ __volatile__( + " .set mips4 \n" + " pref %0, (%1) \n" + " .set mips0 \n" + : + : "i" (Pref_Load), "r" (addr)); +} + +#endif + +#endif /* _ASM_PROCESSOR_H */ diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h new file mode 100644 index 000000000000..c00cca24dae0 --- /dev/null +++ b/arch/mips/include/asm/ptrace.h @@ -0,0 +1,102 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_PTRACE_H +#define _ASM_PTRACE_H + +#ifdef CONFIG_64BIT +#define __ARCH_WANT_COMPAT_SYS_PTRACE +#endif + +/* 0 - 31 are integer registers, 32 - 63 are fp registers. */ +#define FPR_BASE 32 +#define PC 64 +#define CAUSE 65 +#define BADVADDR 66 +#define MMHI 67 +#define MMLO 68 +#define FPC_CSR 69 +#define FPC_EIR 70 +#define DSP_BASE 71 /* 3 more hi / lo register pairs */ +#define DSP_CONTROL 77 +#define ACX 78 + +/* + * This struct defines the way the registers are stored on the stack during a + * system call/exception. As usual the registers k0/k1 aren't being saved. + */ +struct pt_regs { +#ifdef CONFIG_32BIT + /* Pad bytes for argument save space on the stack. */ + unsigned long pad0[6]; +#endif + + /* Saved main processor registers. */ + unsigned long regs[32]; + + /* Saved special registers. */ + unsigned long cp0_status; + unsigned long hi; + unsigned long lo; +#ifdef CONFIG_CPU_HAS_SMARTMIPS + unsigned long acx; +#endif + unsigned long cp0_badvaddr; + unsigned long cp0_cause; + unsigned long cp0_epc; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long cp0_tcstatus; +#endif /* CONFIG_MIPS_MT_SMTC */ +} __attribute__ ((aligned (8))); + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +/* #define PTRACE_GETFPXREGS 18 */ +/* #define PTRACE_SETFPXREGS 19 */ + +#define PTRACE_OLDSETOPTIONS 21 + +#define PTRACE_GET_THREAD_AREA 25 +#define PTRACE_SET_THREAD_AREA 26 + +/* Calls to trace a 64bit program from a 32bit program. */ +#define PTRACE_PEEKTEXT_3264 0xc0 +#define PTRACE_PEEKDATA_3264 0xc1 +#define PTRACE_POKETEXT_3264 0xc2 +#define PTRACE_POKEDATA_3264 0xc3 +#define PTRACE_GET_THREAD_AREA_3264 0xc4 + +#ifdef __KERNEL__ + +#include +#include + +/* + * Does the process account for user or for system time? + */ +#define user_mode(regs) (((regs)->cp0_status & KU_MASK) == KU_USER) + +#define instruction_pointer(regs) ((regs)->cp0_epc) +#define profile_pc(regs) instruction_pointer(regs) + +extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit); + +extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET; + +static inline void die_if_kernel(const char *str, const struct pt_regs *regs) +{ + if (unlikely(!user_mode(regs))) + die(str, regs); +} + +#endif + +#endif /* _ASM_PTRACE_H */ diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h new file mode 100644 index 000000000000..a37d12b3b61c --- /dev/null +++ b/arch/mips/include/asm/r4k-timer.h @@ -0,0 +1,30 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 by Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_R4K_TYPES_H +#define __ASM_R4K_TYPES_H + +#include + +#ifdef CONFIG_SYNC_R4K + +extern void synchronise_count_master(void); +extern void synchronise_count_slave(void); + +#else + +static inline void synchronise_count_master(void) +{ +} + +static inline void synchronise_count_slave(void) +{ +} + +#endif + +#endif /* __ASM_R4K_TYPES_H */ diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h new file mode 100644 index 000000000000..4c140db36786 --- /dev/null +++ b/arch/mips/include/asm/r4kcache.h @@ -0,0 +1,443 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Inline assembly cache operations. + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1997 - 2002 Ralf Baechle (ralf@gnu.org) + * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef _ASM_R4KCACHE_H +#define _ASM_R4KCACHE_H + +#include +#include +#include +#include + +/* + * This macro return a properly sign-extended address suitable as base address + * for indexed cache operations. Two issues here: + * + * - The MIPS32 and MIPS64 specs permit an implementation to directly derive + * the index bits from the virtual address. This breaks with tradition + * set by the R4000. To keep unpleasant surprises from happening we pick + * an address in KSEG0 / CKSEG0. + * - We need a properly sign extended address for 64-bit code. To get away + * without ifdefs we let the compiler do it by a type cast. + */ +#define INDEX_BASE CKSEG0 + +#define cache_op(op,addr) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3\n\t \n" \ + " cache %0, %1 \n" \ + " .set pop \n" \ + : \ + : "i" (op), "R" (*(unsigned char *)(addr))) + +#ifdef CONFIG_MIPS_MT +/* + * Temporary hacks for SMTC debug. Optionally force single-threaded + * execution during I-cache flushes. + */ + +#define PROTECT_CACHE_FLUSHES 1 + +#ifdef PROTECT_CACHE_FLUSHES + +extern int mt_protiflush; +extern int mt_protdflush; +extern void mt_cflush_lockdown(void); +extern void mt_cflush_release(void); + +#define BEGIN_MT_IPROT \ + unsigned long flags = 0; \ + unsigned long mtflags = 0; \ + if(mt_protiflush) { \ + local_irq_save(flags); \ + ehb(); \ + mtflags = dvpe(); \ + mt_cflush_lockdown(); \ + } + +#define END_MT_IPROT \ + if(mt_protiflush) { \ + mt_cflush_release(); \ + evpe(mtflags); \ + local_irq_restore(flags); \ + } + +#define BEGIN_MT_DPROT \ + unsigned long flags = 0; \ + unsigned long mtflags = 0; \ + if(mt_protdflush) { \ + local_irq_save(flags); \ + ehb(); \ + mtflags = dvpe(); \ + mt_cflush_lockdown(); \ + } + +#define END_MT_DPROT \ + if(mt_protdflush) { \ + mt_cflush_release(); \ + evpe(mtflags); \ + local_irq_restore(flags); \ + } + +#else + +#define BEGIN_MT_IPROT +#define BEGIN_MT_DPROT +#define END_MT_IPROT +#define END_MT_DPROT + +#endif /* PROTECT_CACHE_FLUSHES */ + +#define __iflush_prologue \ + unsigned long redundance; \ + extern int mt_n_iflushes; \ + BEGIN_MT_IPROT \ + for (redundance = 0; redundance < mt_n_iflushes; redundance++) { + +#define __iflush_epilogue \ + END_MT_IPROT \ + } + +#define __dflush_prologue \ + unsigned long redundance; \ + extern int mt_n_dflushes; \ + BEGIN_MT_DPROT \ + for (redundance = 0; redundance < mt_n_dflushes; redundance++) { + +#define __dflush_epilogue \ + END_MT_DPROT \ + } + +#define __inv_dflush_prologue __dflush_prologue +#define __inv_dflush_epilogue __dflush_epilogue +#define __sflush_prologue { +#define __sflush_epilogue } +#define __inv_sflush_prologue __sflush_prologue +#define __inv_sflush_epilogue __sflush_epilogue + +#else /* CONFIG_MIPS_MT */ + +#define __iflush_prologue { +#define __iflush_epilogue } +#define __dflush_prologue { +#define __dflush_epilogue } +#define __inv_dflush_prologue { +#define __inv_dflush_epilogue } +#define __sflush_prologue { +#define __sflush_epilogue } +#define __inv_sflush_prologue { +#define __inv_sflush_epilogue } + +#endif /* CONFIG_MIPS_MT */ + +static inline void flush_icache_line_indexed(unsigned long addr) +{ + __iflush_prologue + cache_op(Index_Invalidate_I, addr); + __iflush_epilogue +} + +static inline void flush_dcache_line_indexed(unsigned long addr) +{ + __dflush_prologue + cache_op(Index_Writeback_Inv_D, addr); + __dflush_epilogue +} + +static inline void flush_scache_line_indexed(unsigned long addr) +{ + cache_op(Index_Writeback_Inv_SD, addr); +} + +static inline void flush_icache_line(unsigned long addr) +{ + __iflush_prologue + cache_op(Hit_Invalidate_I, addr); + __iflush_epilogue +} + +static inline void flush_dcache_line(unsigned long addr) +{ + __dflush_prologue + cache_op(Hit_Writeback_Inv_D, addr); + __dflush_epilogue +} + +static inline void invalidate_dcache_line(unsigned long addr) +{ + __dflush_prologue + cache_op(Hit_Invalidate_D, addr); + __dflush_epilogue +} + +static inline void invalidate_scache_line(unsigned long addr) +{ + cache_op(Hit_Invalidate_SD, addr); +} + +static inline void flush_scache_line(unsigned long addr) +{ + cache_op(Hit_Writeback_Inv_SD, addr); +} + +#define protected_cache_op(op,addr) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3 \n" \ + "1: cache %0, (%1) \n" \ + "2: .set pop \n" \ + " .section __ex_table,\"a\" \n" \ + " "STR(PTR)" 1b, 2b \n" \ + " .previous" \ + : \ + : "i" (op), "r" (addr)) + +/* + * The next two are for badland addresses like signal trampolines. + */ +static inline void protected_flush_icache_line(unsigned long addr) +{ + protected_cache_op(Hit_Invalidate_I, addr); +} + +/* + * R10000 / R12000 hazard - these processors don't support the Hit_Writeback_D + * cacheop so we use Hit_Writeback_Inv_D which is supported by all R4000-style + * caches. We're talking about one cacheline unnecessarily getting invalidated + * here so the penalty isn't overly hard. + */ +static inline void protected_writeback_dcache_line(unsigned long addr) +{ + protected_cache_op(Hit_Writeback_Inv_D, addr); +} + +static inline void protected_writeback_scache_line(unsigned long addr) +{ + protected_cache_op(Hit_Writeback_Inv_SD, addr); +} + +/* + * This one is RM7000-specific + */ +static inline void invalidate_tcache_page(unsigned long addr) +{ + cache_op(Page_Invalidate_T, addr); +} + +#define cache16_unroll32(base,op) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3 \n" \ + " cache %1, 0x000(%0); cache %1, 0x010(%0) \n" \ + " cache %1, 0x020(%0); cache %1, 0x030(%0) \n" \ + " cache %1, 0x040(%0); cache %1, 0x050(%0) \n" \ + " cache %1, 0x060(%0); cache %1, 0x070(%0) \n" \ + " cache %1, 0x080(%0); cache %1, 0x090(%0) \n" \ + " cache %1, 0x0a0(%0); cache %1, 0x0b0(%0) \n" \ + " cache %1, 0x0c0(%0); cache %1, 0x0d0(%0) \n" \ + " cache %1, 0x0e0(%0); cache %1, 0x0f0(%0) \n" \ + " cache %1, 0x100(%0); cache %1, 0x110(%0) \n" \ + " cache %1, 0x120(%0); cache %1, 0x130(%0) \n" \ + " cache %1, 0x140(%0); cache %1, 0x150(%0) \n" \ + " cache %1, 0x160(%0); cache %1, 0x170(%0) \n" \ + " cache %1, 0x180(%0); cache %1, 0x190(%0) \n" \ + " cache %1, 0x1a0(%0); cache %1, 0x1b0(%0) \n" \ + " cache %1, 0x1c0(%0); cache %1, 0x1d0(%0) \n" \ + " cache %1, 0x1e0(%0); cache %1, 0x1f0(%0) \n" \ + " .set pop \n" \ + : \ + : "r" (base), \ + "i" (op)); + +#define cache32_unroll32(base,op) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3 \n" \ + " cache %1, 0x000(%0); cache %1, 0x020(%0) \n" \ + " cache %1, 0x040(%0); cache %1, 0x060(%0) \n" \ + " cache %1, 0x080(%0); cache %1, 0x0a0(%0) \n" \ + " cache %1, 0x0c0(%0); cache %1, 0x0e0(%0) \n" \ + " cache %1, 0x100(%0); cache %1, 0x120(%0) \n" \ + " cache %1, 0x140(%0); cache %1, 0x160(%0) \n" \ + " cache %1, 0x180(%0); cache %1, 0x1a0(%0) \n" \ + " cache %1, 0x1c0(%0); cache %1, 0x1e0(%0) \n" \ + " cache %1, 0x200(%0); cache %1, 0x220(%0) \n" \ + " cache %1, 0x240(%0); cache %1, 0x260(%0) \n" \ + " cache %1, 0x280(%0); cache %1, 0x2a0(%0) \n" \ + " cache %1, 0x2c0(%0); cache %1, 0x2e0(%0) \n" \ + " cache %1, 0x300(%0); cache %1, 0x320(%0) \n" \ + " cache %1, 0x340(%0); cache %1, 0x360(%0) \n" \ + " cache %1, 0x380(%0); cache %1, 0x3a0(%0) \n" \ + " cache %1, 0x3c0(%0); cache %1, 0x3e0(%0) \n" \ + " .set pop \n" \ + : \ + : "r" (base), \ + "i" (op)); + +#define cache64_unroll32(base,op) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3 \n" \ + " cache %1, 0x000(%0); cache %1, 0x040(%0) \n" \ + " cache %1, 0x080(%0); cache %1, 0x0c0(%0) \n" \ + " cache %1, 0x100(%0); cache %1, 0x140(%0) \n" \ + " cache %1, 0x180(%0); cache %1, 0x1c0(%0) \n" \ + " cache %1, 0x200(%0); cache %1, 0x240(%0) \n" \ + " cache %1, 0x280(%0); cache %1, 0x2c0(%0) \n" \ + " cache %1, 0x300(%0); cache %1, 0x340(%0) \n" \ + " cache %1, 0x380(%0); cache %1, 0x3c0(%0) \n" \ + " cache %1, 0x400(%0); cache %1, 0x440(%0) \n" \ + " cache %1, 0x480(%0); cache %1, 0x4c0(%0) \n" \ + " cache %1, 0x500(%0); cache %1, 0x540(%0) \n" \ + " cache %1, 0x580(%0); cache %1, 0x5c0(%0) \n" \ + " cache %1, 0x600(%0); cache %1, 0x640(%0) \n" \ + " cache %1, 0x680(%0); cache %1, 0x6c0(%0) \n" \ + " cache %1, 0x700(%0); cache %1, 0x740(%0) \n" \ + " cache %1, 0x780(%0); cache %1, 0x7c0(%0) \n" \ + " .set pop \n" \ + : \ + : "r" (base), \ + "i" (op)); + +#define cache128_unroll32(base,op) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3 \n" \ + " cache %1, 0x000(%0); cache %1, 0x080(%0) \n" \ + " cache %1, 0x100(%0); cache %1, 0x180(%0) \n" \ + " cache %1, 0x200(%0); cache %1, 0x280(%0) \n" \ + " cache %1, 0x300(%0); cache %1, 0x380(%0) \n" \ + " cache %1, 0x400(%0); cache %1, 0x480(%0) \n" \ + " cache %1, 0x500(%0); cache %1, 0x580(%0) \n" \ + " cache %1, 0x600(%0); cache %1, 0x680(%0) \n" \ + " cache %1, 0x700(%0); cache %1, 0x780(%0) \n" \ + " cache %1, 0x800(%0); cache %1, 0x880(%0) \n" \ + " cache %1, 0x900(%0); cache %1, 0x980(%0) \n" \ + " cache %1, 0xa00(%0); cache %1, 0xa80(%0) \n" \ + " cache %1, 0xb00(%0); cache %1, 0xb80(%0) \n" \ + " cache %1, 0xc00(%0); cache %1, 0xc80(%0) \n" \ + " cache %1, 0xd00(%0); cache %1, 0xd80(%0) \n" \ + " cache %1, 0xe00(%0); cache %1, 0xe80(%0) \n" \ + " cache %1, 0xf00(%0); cache %1, 0xf80(%0) \n" \ + " .set pop \n" \ + : \ + : "r" (base), \ + "i" (op)); + +/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ +#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \ +static inline void blast_##pfx##cache##lsize(void) \ +{ \ + unsigned long start = INDEX_BASE; \ + unsigned long end = start + current_cpu_data.desc.waysize; \ + unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \ + unsigned long ws_end = current_cpu_data.desc.ways << \ + current_cpu_data.desc.waybit; \ + unsigned long ws, addr; \ + \ + __##pfx##flush_prologue \ + \ + for (ws = 0; ws < ws_end; ws += ws_inc) \ + for (addr = start; addr < end; addr += lsize * 32) \ + cache##lsize##_unroll32(addr|ws, indexop); \ + \ + __##pfx##flush_epilogue \ +} \ + \ +static inline void blast_##pfx##cache##lsize##_page(unsigned long page) \ +{ \ + unsigned long start = page; \ + unsigned long end = page + PAGE_SIZE; \ + \ + __##pfx##flush_prologue \ + \ + do { \ + cache##lsize##_unroll32(start, hitop); \ + start += lsize * 32; \ + } while (start < end); \ + \ + __##pfx##flush_epilogue \ +} \ + \ +static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \ +{ \ + unsigned long indexmask = current_cpu_data.desc.waysize - 1; \ + unsigned long start = INDEX_BASE + (page & indexmask); \ + unsigned long end = start + PAGE_SIZE; \ + unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \ + unsigned long ws_end = current_cpu_data.desc.ways << \ + current_cpu_data.desc.waybit; \ + unsigned long ws, addr; \ + \ + __##pfx##flush_prologue \ + \ + for (ws = 0; ws < ws_end; ws += ws_inc) \ + for (addr = start; addr < end; addr += lsize * 32) \ + cache##lsize##_unroll32(addr|ws, indexop); \ + \ + __##pfx##flush_epilogue \ +} + +__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16) +__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16) +__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) +__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32) +__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32) +__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32) +__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) +__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64) +__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128) + +__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16) +__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32) +__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16) +__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32) +__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64) +__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128) + +/* build blast_xxx_range, protected_blast_xxx_range */ +#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \ +static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ + unsigned long end) \ +{ \ + unsigned long lsize = cpu_##desc##_line_size(); \ + unsigned long addr = start & ~(lsize - 1); \ + unsigned long aend = (end - 1) & ~(lsize - 1); \ + \ + __##pfx##flush_prologue \ + \ + while (1) { \ + prot##cache_op(hitop, addr); \ + if (addr == aend) \ + break; \ + addr += lsize; \ + } \ + \ + __##pfx##flush_epilogue \ +} + +__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_) +__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_) +__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_) +__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, ) +__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, ) +/* blast_inv_dcache_range */ +__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, ) +__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, ) + +#endif /* _ASM_R4KCACHE_H */ diff --git a/arch/mips/include/asm/reboot.h b/arch/mips/include/asm/reboot.h new file mode 100644 index 000000000000..e48c0bfab257 --- /dev/null +++ b/arch/mips/include/asm/reboot.h @@ -0,0 +1,15 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 1999, 2001, 06 by Ralf Baechle + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#ifndef _ASM_REBOOT_H +#define _ASM_REBOOT_H + +extern void (*_machine_restart)(char *command); +extern void (*_machine_halt)(void); + +#endif /* _ASM_REBOOT_H */ diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h new file mode 100644 index 000000000000..634b55d7e7f6 --- /dev/null +++ b/arch/mips/include/asm/reg.h @@ -0,0 +1,128 @@ +/* + * Various register offset definitions for debuggers, core file + * examiners and whatnot. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999 Ralf Baechle + * Copyright (C) 1995, 1999 Silicon Graphics + */ +#ifndef __ASM_MIPS_REG_H +#define __ASM_MIPS_REG_H + + +#if defined(CONFIG_32BIT) || defined(WANT_COMPAT_REG_H) + +#define EF_R0 6 +#define EF_R1 7 +#define EF_R2 8 +#define EF_R3 9 +#define EF_R4 10 +#define EF_R5 11 +#define EF_R6 12 +#define EF_R7 13 +#define EF_R8 14 +#define EF_R9 15 +#define EF_R10 16 +#define EF_R11 17 +#define EF_R12 18 +#define EF_R13 19 +#define EF_R14 20 +#define EF_R15 21 +#define EF_R16 22 +#define EF_R17 23 +#define EF_R18 24 +#define EF_R19 25 +#define EF_R20 26 +#define EF_R21 27 +#define EF_R22 28 +#define EF_R23 29 +#define EF_R24 30 +#define EF_R25 31 + +/* + * k0/k1 unsaved + */ +#define EF_R26 32 +#define EF_R27 33 + +#define EF_R28 34 +#define EF_R29 35 +#define EF_R30 36 +#define EF_R31 37 + +/* + * Saved special registers + */ +#define EF_LO 38 +#define EF_HI 39 + +#define EF_CP0_EPC 40 +#define EF_CP0_BADVADDR 41 +#define EF_CP0_STATUS 42 +#define EF_CP0_CAUSE 43 +#define EF_UNUSED0 44 + +#define EF_SIZE 180 + +#endif + +#ifdef CONFIG_64BIT + +#define EF_R0 0 +#define EF_R1 1 +#define EF_R2 2 +#define EF_R3 3 +#define EF_R4 4 +#define EF_R5 5 +#define EF_R6 6 +#define EF_R7 7 +#define EF_R8 8 +#define EF_R9 9 +#define EF_R10 10 +#define EF_R11 11 +#define EF_R12 12 +#define EF_R13 13 +#define EF_R14 14 +#define EF_R15 15 +#define EF_R16 16 +#define EF_R17 17 +#define EF_R18 18 +#define EF_R19 19 +#define EF_R20 20 +#define EF_R21 21 +#define EF_R22 22 +#define EF_R23 23 +#define EF_R24 24 +#define EF_R25 25 + +/* + * k0/k1 unsaved + */ +#define EF_R26 26 +#define EF_R27 27 + + +#define EF_R28 28 +#define EF_R29 29 +#define EF_R30 30 +#define EF_R31 31 + +/* + * Saved special registers + */ +#define EF_LO 32 +#define EF_HI 33 + +#define EF_CP0_EPC 34 +#define EF_CP0_BADVADDR 35 +#define EF_CP0_STATUS 36 +#define EF_CP0_CAUSE 37 + +#define EF_SIZE 304 /* size in bytes */ + +#endif /* CONFIG_64BIT */ + +#endif /* __ASM_MIPS_REG_H */ diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h new file mode 100644 index 000000000000..7c8ecb6b9c40 --- /dev/null +++ b/arch/mips/include/asm/regdef.h @@ -0,0 +1,100 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1985 MIPS Computer Systems, Inc. + * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle + * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_REGDEF_H +#define _ASM_REGDEF_H + +#include + +#if _MIPS_SIM == _MIPS_SIM_ABI32 + +/* + * Symbolic register names for 32 bit ABI + */ +#define zero $0 /* wired zero */ +#define AT $1 /* assembler temp - uppercase because of ".set at" */ +#define v0 $2 /* return value */ +#define v1 $3 +#define a0 $4 /* argument registers */ +#define a1 $5 +#define a2 $6 +#define a3 $7 +#define t0 $8 /* caller saved */ +#define t1 $9 +#define t2 $10 +#define t3 $11 +#define t4 $12 +#define t5 $13 +#define t6 $14 +#define t7 $15 +#define s0 $16 /* callee saved */ +#define s1 $17 +#define s2 $18 +#define s3 $19 +#define s4 $20 +#define s5 $21 +#define s6 $22 +#define s7 $23 +#define t8 $24 /* caller saved */ +#define t9 $25 +#define jp $25 /* PIC jump register */ +#define k0 $26 /* kernel scratch */ +#define k1 $27 +#define gp $28 /* global pointer */ +#define sp $29 /* stack pointer */ +#define fp $30 /* frame pointer */ +#define s8 $30 /* same like fp! */ +#define ra $31 /* return address */ + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 + +#define zero $0 /* wired zero */ +#define AT $at /* assembler temp - uppercase because of ".set at" */ +#define v0 $2 /* return value - caller saved */ +#define v1 $3 +#define a0 $4 /* argument registers */ +#define a1 $5 +#define a2 $6 +#define a3 $7 +#define a4 $8 /* arg reg 64 bit; caller saved in 32 bit */ +#define ta0 $8 +#define a5 $9 +#define ta1 $9 +#define a6 $10 +#define ta2 $10 +#define a7 $11 +#define ta3 $11 +#define t0 $12 /* caller saved */ +#define t1 $13 +#define t2 $14 +#define t3 $15 +#define s0 $16 /* callee saved */ +#define s1 $17 +#define s2 $18 +#define s3 $19 +#define s4 $20 +#define s5 $21 +#define s6 $22 +#define s7 $23 +#define t8 $24 /* caller saved */ +#define t9 $25 /* callee address for PIC/temp */ +#define jp $25 /* PIC jump register */ +#define k0 $26 /* kernel temporary */ +#define k1 $27 +#define gp $28 /* global pointer - caller saved for PIC */ +#define sp $29 /* stack pointer */ +#define fp $30 /* frame pointer */ +#define s8 $30 /* callee saved */ +#define ra $31 /* return address */ + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */ + +#endif /* _ASM_REGDEF_H */ diff --git a/arch/mips/include/asm/resource.h b/arch/mips/include/asm/resource.h new file mode 100644 index 000000000000..87cb3085269c --- /dev/null +++ b/arch/mips/include/asm/resource.h @@ -0,0 +1,35 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 98, 99, 2000 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_RESOURCE_H +#define _ASM_RESOURCE_H + + +/* + * These five resource limit IDs have a MIPS/Linux-specific ordering, + * the rest comes from the generic header: + */ +#define RLIMIT_NOFILE 5 /* max number of open files */ +#define RLIMIT_AS 6 /* address space limit */ +#define RLIMIT_RSS 7 /* max resident set size */ +#define RLIMIT_NPROC 8 /* max number of processes */ +#define RLIMIT_MEMLOCK 9 /* max locked-in-memory address space */ + +/* + * SuS says limits have to be unsigned. + * Which makes a ton more sense anyway, + * but we keep the old value on MIPS32, + * for compatibility: + */ +#ifdef CONFIG_32BIT +# define RLIM_INFINITY 0x7fffffffUL +#endif + +#include + +#endif /* _ASM_RESOURCE_H */ diff --git a/arch/mips/include/asm/rm9k-ocd.h b/arch/mips/include/asm/rm9k-ocd.h new file mode 100644 index 000000000000..b0b80d9ecf96 --- /dev/null +++ b/arch/mips/include/asm/rm9k-ocd.h @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2004 by Basler Vision Technologies AG + * Author: Thomas Koeller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_ASM_RM9K_OCD_H) +#define _ASM_RM9K_OCD_H + +#include +#include +#include + +extern volatile void __iomem * const ocd_base; +extern volatile void __iomem * const titan_base; + +#define ocd_addr(__x__) (ocd_base + (__x__)) +#define titan_addr(__x__) (titan_base + (__x__)) +#define scram_addr(__x__) (scram_base + (__x__)) + +/* OCD register access */ +#define ocd_readl(__offs__) __raw_readl(ocd_addr(__offs__)) +#define ocd_readw(__offs__) __raw_readw(ocd_addr(__offs__)) +#define ocd_readb(__offs__) __raw_readb(ocd_addr(__offs__)) +#define ocd_writel(__val__, __offs__) \ + __raw_writel((__val__), ocd_addr(__offs__)) +#define ocd_writew(__val__, __offs__) \ + __raw_writew((__val__), ocd_addr(__offs__)) +#define ocd_writeb(__val__, __offs__) \ + __raw_writeb((__val__), ocd_addr(__offs__)) + +/* TITAN register access - 32 bit-wide only */ +#define titan_readl(__offs__) __raw_readl(titan_addr(__offs__)) +#define titan_writel(__val__, __offs__) \ + __raw_writel((__val__), titan_addr(__offs__)) + +/* Protect access to shared TITAN registers */ +extern spinlock_t titan_lock; +extern int titan_irqflags; +#define lock_titan_regs() spin_lock_irqsave(&titan_lock, titan_irqflags) +#define unlock_titan_regs() spin_unlock_irqrestore(&titan_lock, titan_irqflags) + +#endif /* !defined(_ASM_RM9K_OCD_H) */ diff --git a/arch/mips/include/asm/rtlx.h b/arch/mips/include/asm/rtlx.h new file mode 100644 index 000000000000..4ca3063ed2ce --- /dev/null +++ b/arch/mips/include/asm/rtlx.h @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. + * + */ + +#ifndef __ASM_RTLX_H_ +#define __ASM_RTLX_H_ + +#include + +#define LX_NODE_BASE 10 + +#define MIPS_CPU_RTLX_IRQ 0 + +#define RTLX_VERSION 2 +#define RTLX_xID 0x12345600 +#define RTLX_ID (RTLX_xID | RTLX_VERSION) +#define RTLX_CHANNELS 8 + +#define RTLX_CHANNEL_STDIO 0 +#define RTLX_CHANNEL_DBG 1 +#define RTLX_CHANNEL_SYSIO 2 + +extern int rtlx_open(int index, int can_sleep); +extern int rtlx_release(int index); +extern ssize_t rtlx_read(int index, void __user *buff, size_t count); +extern ssize_t rtlx_write(int index, const void __user *buffer, size_t count); +extern unsigned int rtlx_read_poll(int index, int can_sleep); +extern unsigned int rtlx_write_poll(int index); + +enum rtlx_state { + RTLX_STATE_UNUSED = 0, + RTLX_STATE_INITIALISED, + RTLX_STATE_REMOTE_READY, + RTLX_STATE_OPENED +}; + +#define RTLX_BUFFER_SIZE 2048 + +/* each channel supports read and write. + linux (vpe0) reads lx_buffer and writes rt_buffer + SP (vpe1) reads rt_buffer and writes lx_buffer +*/ +struct rtlx_channel { + enum rtlx_state rt_state; + enum rtlx_state lx_state; + + int buffer_size; + + /* read and write indexes per buffer */ + int rt_write, rt_read; + char *rt_buffer; + + int lx_write, lx_read; + char *lx_buffer; +}; + +struct rtlx_info { + unsigned long id; + enum rtlx_state state; + + struct rtlx_channel channel[RTLX_CHANNELS]; +}; + +#endif /* __ASM_RTLX_H_ */ diff --git a/arch/mips/include/asm/scatterlist.h b/arch/mips/include/asm/scatterlist.h new file mode 100644 index 000000000000..83d69fe17c9f --- /dev/null +++ b/arch/mips/include/asm/scatterlist.h @@ -0,0 +1,28 @@ +#ifndef __ASM_SCATTERLIST_H +#define __ASM_SCATTERLIST_H + +#include + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + dma_addr_t dma_address; + unsigned int length; +}; + +/* + * These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (0x00ffffffUL) + +#endif /* __ASM_SCATTERLIST_H */ diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h new file mode 100644 index 000000000000..36ed44070256 --- /dev/null +++ b/arch/mips/include/asm/seccomp.h @@ -0,0 +1,37 @@ +#ifndef __ASM_SECCOMP_H + +#include +#include + +#define __NR_seccomp_read __NR_read +#define __NR_seccomp_write __NR_write +#define __NR_seccomp_exit __NR_exit +#define __NR_seccomp_sigreturn __NR_rt_sigreturn + +/* + * Kludge alert: + * + * The generic seccomp code currently allows only a single compat ABI. Until + * this is fixed we priorize O32 as the compat ABI over N32. + */ +#ifdef CONFIG_MIPS32_O32 + +#define TIF_32BIT TIF_32BIT_REGS + +#define __NR_seccomp_read_32 4003 +#define __NR_seccomp_write_32 4004 +#define __NR_seccomp_exit_32 4001 +#define __NR_seccomp_sigreturn_32 4193 /* rt_sigreturn */ + +#elif defined(CONFIG_MIPS32_N32) + +#define TIF_32BIT _TIF_32BIT_ADDR + +#define __NR_seccomp_read_32 6000 +#define __NR_seccomp_write_32 6001 +#define __NR_seccomp_exit_32 6058 +#define __NR_seccomp_sigreturn_32 6211 /* rt_sigreturn */ + +#endif /* CONFIG_MIPS32_O32 */ + +#endif /* __ASM_SECCOMP_H */ diff --git a/arch/mips/include/asm/sections.h b/arch/mips/include/asm/sections.h new file mode 100644 index 000000000000..b7e37262c246 --- /dev/null +++ b/arch/mips/include/asm/sections.h @@ -0,0 +1,6 @@ +#ifndef _ASM_SECTIONS_H +#define _ASM_SECTIONS_H + +#include + +#endif /* _ASM_SECTIONS_H */ diff --git a/arch/mips/include/asm/segment.h b/arch/mips/include/asm/segment.h new file mode 100644 index 000000000000..92ac001fc483 --- /dev/null +++ b/arch/mips/include/asm/segment.h @@ -0,0 +1,6 @@ +#ifndef _ASM_SEGMENT_H +#define _ASM_SEGMENT_H + +/* Only here because we have some old header files that expect it.. */ + +#endif /* _ASM_SEGMENT_H */ diff --git a/arch/mips/include/asm/sembuf.h b/arch/mips/include/asm/sembuf.h new file mode 100644 index 000000000000..7281a4decaa0 --- /dev/null +++ b/arch/mips/include/asm/sembuf.h @@ -0,0 +1,22 @@ +#ifndef _ASM_SEMBUF_H +#define _ASM_SEMBUF_H + +/* + * The semid64_ds structure for the MIPS architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 2 miscellaneous 64-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + __kernel_time_t sem_ctime; /* last change time */ + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_SEMBUF_H */ diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h new file mode 100644 index 000000000000..c07ebd8eb9e7 --- /dev/null +++ b/arch/mips/include/asm/serial.h @@ -0,0 +1,22 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H + + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD (1843200 / 16) + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h new file mode 100644 index 000000000000..e600cedda976 --- /dev/null +++ b/arch/mips/include/asm/setup.h @@ -0,0 +1,10 @@ +#ifndef _MIPS_SETUP_H +#define _MIPS_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +#ifdef __KERNEL__ +extern void setup_early_printk(void); +#endif /* __KERNEL__ */ + +#endif /* __SETUP_H */ diff --git a/arch/mips/include/asm/sgi/gio.h b/arch/mips/include/asm/sgi/gio.h new file mode 100644 index 000000000000..889cf028c95d --- /dev/null +++ b/arch/mips/include/asm/sgi/gio.h @@ -0,0 +1,86 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * gio.h: Definitions for SGI GIO bus + * + * Copyright (C) 2002 Ladislav Michl + */ + +#ifndef _SGI_GIO_H +#define _SGI_GIO_H + +/* + * GIO bus addresses + * + * The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have + * three physical connectors, but only two slots, GFX and EXP0. + * + * There is 10MB of GIO address space for GIO64 slot devices + * slot# slot type address range size + * ----- --------- ----------------------- ----- + * 0 GFX 0x1f000000 - 0x1f3fffff 4MB + * 1 EXP0 0x1f400000 - 0x1f5fffff 2MB + * 2 EXP1 0x1f600000 - 0x1f9fffff 4MB + * + * There are un-slotted devices, HPC, I/O and misc devices, which are grouped + * into the HPC address space. + * - MISC 0x1fb00000 - 0x1fbfffff 1MB + * + * Following space is reserved and unused + * - RESERVED 0x18000000 - 0x1effffff 112MB + * + * GIO bus IDs + * + * Each GIO bus device identifies itself to the system by answering a + * read with an "ID" value. IDs are either 8 or 32 bits long. IDs less + * than 128 are 8 bits long, with the most significant 24 bits read from + * the slot undefined. + * + * 32-bit IDs are divided into + * bits 0:6 the product ID; ranges from 0x00 to 0x7F. + * bit 7 0=GIO Product ID is 8 bits wide + * 1=GIO Product ID is 32 bits wide. + * bits 8:15 manufacturer version for the product. + * bit 16 0=GIO32 and GIO32-bis, 1=GIO64. + * bit 17 0=no ROM present + * 1=ROM present on this board AND next three words + * space define the ROM. + * bits 18:31 up to manufacturer. + * + * IDs above 0x50/0xd0 are of 3rd party boards. + * + * 8-bit IDs + * 0x01 XPI low cost FDDI + * 0x02 GTR TokenRing + * 0x04 Synchronous ISDN + * 0x05 ATM board [*] + * 0x06 Canon Interface + * 0x07 16 bit SCSI Card [*] + * 0x08 JPEG (Double Wide) + * 0x09 JPEG (Single Wide) + * 0x0a XPI mez. FDDI device 0 + * 0x0b XPI mez. FDDI device 1 + * 0x0c SMPTE 259M Video [*] + * 0x0d Babblefish Compression [*] + * 0x0e E-Plex 8-port Ethernet + * 0x30 Lyon Lamb IVAS + * 0xb8 GIO 100BaseTX Fast Ethernet (gfe) + * + * [*] Device provide 32-bit ID. + * + */ + +#define GIO_ID(x) (x & 0x7f) +#define GIO_32BIT_ID 0x80 +#define GIO_REV(x) ((x >> 8) & 0xff) +#define GIO_64BIT_IFACE 0x10000 +#define GIO_ROM_PRESENT 0x20000 +#define GIO_VENDOR_CODE(x) ((x >> 18) & 0x3fff) + +#define GIO_SLOT_GFX_BASE 0x1f000000 +#define GIO_SLOT_EXP0_BASE 0x1f400000 +#define GIO_SLOT_EXP1_BASE 0x1f600000 + +#endif /* _SGI_GIO_H */ diff --git a/arch/mips/include/asm/sgi/hpc3.h b/arch/mips/include/asm/sgi/hpc3.h new file mode 100644 index 000000000000..c4729f531919 --- /dev/null +++ b/arch/mips/include/asm/sgi/hpc3.h @@ -0,0 +1,317 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * hpc3.h: Definitions for SGI HPC3 controller + * + * Copyright (C) 1996 David S. Miller + * Copyright (C) 1998 Ralf Baechle + */ + +#ifndef _SGI_HPC3_H +#define _SGI_HPC3_H + +#include +#include + +/* An HPC DMA descriptor. */ +struct hpc_dma_desc { + u32 pbuf; /* physical address of data buffer */ + u32 cntinfo; /* counter and info bits */ +#define HPCDMA_EOX 0x80000000 /* last desc in chain for tx */ +#define HPCDMA_EOR 0x80000000 /* last desc in chain for rx */ +#define HPCDMA_EOXP 0x40000000 /* end of packet for tx */ +#define HPCDMA_EORP 0x40000000 /* end of packet for rx */ +#define HPCDMA_XIE 0x20000000 /* irq generated when at end of this desc */ +#define HPCDMA_XIU 0x01000000 /* Tx buffer in use by CPU. */ +#define HPCDMA_EIPC 0x00ff0000 /* SEEQ ethernet special xternal bytecount */ +#define HPCDMA_ETXD 0x00008000 /* set to one by HPC when packet tx'd */ +#define HPCDMA_OWN 0x00004000 /* Denotes ring buffer ownership on rx */ +#define HPCDMA_BCNT 0x00003fff /* size in bytes of this dma buffer */ + + u32 pnext; /* paddr of next hpc_dma_desc if any */ +}; + +/* The set of regs for each HPC3 PBUS DMA channel. */ +struct hpc3_pbus_dmacregs { + volatile u32 pbdma_bptr; /* pbus dma channel buffer ptr */ + volatile u32 pbdma_dptr; /* pbus dma channel desc ptr */ + u32 _unused0[0x1000/4 - 2]; /* padding */ + volatile u32 pbdma_ctrl; /* pbus dma channel control register has + * copletely different meaning for read + * compared with write */ + /* read */ +#define HPC3_PDMACTRL_INT 0x00000001 /* interrupt (cleared after read) */ +#define HPC3_PDMACTRL_ISACT 0x00000002 /* channel active */ + /* write */ +#define HPC3_PDMACTRL_SEL 0x00000002 /* little endian transfer */ +#define HPC3_PDMACTRL_RCV 0x00000004 /* direction is receive */ +#define HPC3_PDMACTRL_FLSH 0x00000008 /* enable flush for receive DMA */ +#define HPC3_PDMACTRL_ACT 0x00000010 /* start dma transfer */ +#define HPC3_PDMACTRL_LD 0x00000020 /* load enable for ACT */ +#define HPC3_PDMACTRL_RT 0x00000040 /* Use realtime GIO bus servicing */ +#define HPC3_PDMACTRL_HW 0x0000ff00 /* DMA High-water mark */ +#define HPC3_PDMACTRL_FB 0x003f0000 /* Ptr to beginning of fifo */ +#define HPC3_PDMACTRL_FE 0x3f000000 /* Ptr to end of fifo */ + + u32 _unused1[0x1000/4 - 1]; /* padding */ +}; + +/* The HPC3 SCSI registers, this does not include external ones. */ +struct hpc3_scsiregs { + volatile u32 cbptr; /* current dma buffer ptr, diagnostic use only */ + volatile u32 ndptr; /* next dma descriptor ptr */ + u32 _unused0[0x1000/4 - 2]; /* padding */ + volatile u32 bcd; /* byte count info */ +#define HPC3_SBCD_BCNTMSK 0x00003fff /* bytes to transfer from/to memory */ +#define HPC3_SBCD_XIE 0x00004000 /* Send IRQ when done with cur buf */ +#define HPC3_SBCD_EOX 0x00008000 /* Indicates this is last buf in chain */ + + volatile u32 ctrl; /* control register */ +#define HPC3_SCTRL_IRQ 0x01 /* IRQ asserted, either dma done or parity */ +#define HPC3_SCTRL_ENDIAN 0x02 /* DMA endian mode, 0=big 1=little */ +#define HPC3_SCTRL_DIR 0x04 /* DMA direction, 1=dev2mem 0=mem2dev */ +#define HPC3_SCTRL_FLUSH 0x08 /* Tells HPC3 to flush scsi fifos */ +#define HPC3_SCTRL_ACTIVE 0x10 /* SCSI DMA channel is active */ +#define HPC3_SCTRL_AMASK 0x20 /* DMA active inhibits PIO */ +#define HPC3_SCTRL_CRESET 0x40 /* Resets dma channel and external controller */ +#define HPC3_SCTRL_PERR 0x80 /* Bad parity on HPC3 iface to scsi controller */ + + volatile u32 gfptr; /* current GIO fifo ptr */ + volatile u32 dfptr; /* current device fifo ptr */ + volatile u32 dconfig; /* DMA configuration register */ +#define HPC3_SDCFG_HCLK 0x00001 /* Enable DMA half clock mode */ +#define HPC3_SDCFG_D1 0x00006 /* Cycles to spend in D1 state */ +#define HPC3_SDCFG_D2 0x00038 /* Cycles to spend in D2 state */ +#define HPC3_SDCFG_D3 0x001c0 /* Cycles to spend in D3 state */ +#define HPC3_SDCFG_HWAT 0x00e00 /* DMA high water mark */ +#define HPC3_SDCFG_HW 0x01000 /* Enable 16-bit halfword DMA accesses to scsi */ +#define HPC3_SDCFG_SWAP 0x02000 /* Byte swap all DMA accesses */ +#define HPC3_SDCFG_EPAR 0x04000 /* Enable parity checking for DMA */ +#define HPC3_SDCFG_POLL 0x08000 /* hd_dreq polarity control */ +#define HPC3_SDCFG_ERLY 0x30000 /* hd_dreq behavior control bits */ + + volatile u32 pconfig; /* PIO configuration register */ +#define HPC3_SPCFG_P3 0x0003 /* Cycles to spend in P3 state */ +#define HPC3_SPCFG_P2W 0x001c /* Cycles to spend in P2 state for writes */ +#define HPC3_SPCFG_P2R 0x01e0 /* Cycles to spend in P2 state for reads */ +#define HPC3_SPCFG_P1 0x0e00 /* Cycles to spend in P1 state */ +#define HPC3_SPCFG_HW 0x1000 /* Enable 16-bit halfword PIO accesses to scsi */ +#define HPC3_SPCFG_SWAP 0x2000 /* Byte swap all PIO accesses */ +#define HPC3_SPCFG_EPAR 0x4000 /* Enable parity checking for PIO */ +#define HPC3_SPCFG_FUJI 0x8000 /* Fujitsu scsi controller mode for faster dma/pio */ + + u32 _unused1[0x1000/4 - 6]; /* padding */ +}; + +/* SEEQ ethernet HPC3 registers, only one seeq per HPC3. */ +struct hpc3_ethregs { + /* Receiver registers. */ + volatile u32 rx_cbptr; /* current dma buffer ptr, diagnostic use only */ + volatile u32 rx_ndptr; /* next dma descriptor ptr */ + u32 _unused0[0x1000/4 - 2]; /* padding */ + volatile u32 rx_bcd; /* byte count info */ +#define HPC3_ERXBCD_BCNTMSK 0x00003fff /* bytes to be sent to memory */ +#define HPC3_ERXBCD_XIE 0x20000000 /* HPC3 interrupts cpu at end of this buf */ +#define HPC3_ERXBCD_EOX 0x80000000 /* flags this as end of descriptor chain */ + + volatile u32 rx_ctrl; /* control register */ +#define HPC3_ERXCTRL_STAT50 0x0000003f /* Receive status reg bits of Seeq8003 */ +#define HPC3_ERXCTRL_STAT6 0x00000040 /* Rdonly irq status */ +#define HPC3_ERXCTRL_STAT7 0x00000080 /* Rdonlt old/new status bit from Seeq */ +#define HPC3_ERXCTRL_ENDIAN 0x00000100 /* Endian for dma channel, little=1 big=0 */ +#define HPC3_ERXCTRL_ACTIVE 0x00000200 /* Tells if DMA transfer is in progress */ +#define HPC3_ERXCTRL_AMASK 0x00000400 /* Tells if ACTIVE inhibits PIO's to hpc3 */ +#define HPC3_ERXCTRL_RBO 0x00000800 /* Receive buffer overflow if set to 1 */ + + volatile u32 rx_gfptr; /* current GIO fifo ptr */ + volatile u32 rx_dfptr; /* current device fifo ptr */ + u32 _unused1; /* padding */ + volatile u32 reset; /* reset register */ +#define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */ +#define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */ +#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */ + + volatile u32 dconfig; /* DMA configuration register */ +#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */ +#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */ +#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */ +#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */ +#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */ +#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */ +#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */ +#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */ + + volatile u32 pconfig; /* PIO configuration register */ +#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */ +#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */ +#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */ +#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */ + + u32 _unused2[0x1000/4 - 8]; /* padding */ + + /* Transmitter registers. */ + volatile u32 tx_cbptr; /* current dma buffer ptr, diagnostic use only */ + volatile u32 tx_ndptr; /* next dma descriptor ptr */ + u32 _unused3[0x1000/4 - 2]; /* padding */ + volatile u32 tx_bcd; /* byte count info */ +#define HPC3_ETXBCD_BCNTMSK 0x00003fff /* bytes to be read from memory */ +#define HPC3_ETXBCD_ESAMP 0x10000000 /* if set, too late to add descriptor */ +#define HPC3_ETXBCD_XIE 0x20000000 /* Interrupt cpu at end of cur desc */ +#define HPC3_ETXBCD_EOP 0x40000000 /* Last byte of cur buf is end of packet */ +#define HPC3_ETXBCD_EOX 0x80000000 /* This buf is the end of desc chain */ + + volatile u32 tx_ctrl; /* control register */ +#define HPC3_ETXCTRL_STAT30 0x0000000f /* Rdonly copy of seeq tx stat reg */ +#define HPC3_ETXCTRL_STAT4 0x00000010 /* Indicate late collision occurred */ +#define HPC3_ETXCTRL_STAT75 0x000000e0 /* Rdonly irq status from seeq */ +#define HPC3_ETXCTRL_ENDIAN 0x00000100 /* DMA channel endian mode, 1=little 0=big */ +#define HPC3_ETXCTRL_ACTIVE 0x00000200 /* DMA tx channel is active */ +#define HPC3_ETXCTRL_AMASK 0x00000400 /* Indicates ACTIVE inhibits PIO's */ + + volatile u32 tx_gfptr; /* current GIO fifo ptr */ + volatile u32 tx_dfptr; /* current device fifo ptr */ + u32 _unused4[0x1000/4 - 4]; /* padding */ +}; + +struct hpc3_regs { + /* First regs for the PBUS 8 dma channels. */ + struct hpc3_pbus_dmacregs pbdma[8]; + + /* Now the HPC scsi registers, we get two scsi reg sets. */ + struct hpc3_scsiregs scsi_chan0, scsi_chan1; + + /* The SEEQ hpc3 ethernet dma/control registers. */ + struct hpc3_ethregs ethregs; + + /* Here are where the hpc3 fifo's can be directly accessed + * via PIO accesses. Under normal operation we never stick + * our grubby paws in here so it's just padding. */ + u32 _unused0[0x18000/4]; + + /* HPC3 irq status regs. Due to a peculiar bug you need to + * look at two different register addresses to get at all of + * the status bits. The first reg can only reliably report + * bits 4:0 of the status, and the second reg can only + * reliably report bits 9:5 of the hpc3 irq status. I told + * you it was a peculiar bug. ;-) + */ + volatile u32 istat0; /* Irq status, only bits <4:0> reliable. */ +#define HPC3_ISTAT_PBIMASK 0x0ff /* irq bits for pbus devs 0 --> 7 */ +#define HPC3_ISTAT_SC0MASK 0x100 /* irq bit for scsi channel 0 */ +#define HPC3_ISTAT_SC1MASK 0x200 /* irq bit for scsi channel 1 */ + + volatile u32 gio_misc; /* GIO misc control bits. */ +#define HPC3_GIOMISC_ERTIME 0x1 /* Enable external timer real time. */ +#define HPC3_GIOMISC_DENDIAN 0x2 /* dma descriptor endian, 1=lit 0=big */ + + u32 eeprom; /* EEPROM data reg. */ +#define HPC3_EEPROM_EPROT 0x01 /* Protect register enable */ +#define HPC3_EEPROM_CSEL 0x02 /* Chip select */ +#define HPC3_EEPROM_ECLK 0x04 /* EEPROM clock */ +#define HPC3_EEPROM_DATO 0x08 /* Data out */ +#define HPC3_EEPROM_DATI 0x10 /* Data in */ + + volatile u32 istat1; /* Irq status, only bits <9:5> reliable. */ + volatile u32 bestat; /* Bus error interrupt status reg. */ +#define HPC3_BESTAT_BLMASK 0x000ff /* Bus lane where bad parity occurred */ +#define HPC3_BESTAT_CTYPE 0x00100 /* Bus cycle type, 0=PIO 1=DMA */ +#define HPC3_BESTAT_PIDSHIFT 9 +#define HPC3_BESTAT_PIDMASK 0x3f700 /* DMA channel parity identifier */ + + u32 _unused1[0x14000/4 - 5]; /* padding */ + + /* Now direct PIO per-HPC3 peripheral access to external regs. */ + volatile u32 scsi0_ext[256]; /* SCSI channel 0 external regs */ + u32 _unused2[0x7c00/4]; + volatile u32 scsi1_ext[256]; /* SCSI channel 1 external regs */ + u32 _unused3[0x7c00/4]; + volatile u32 eth_ext[320]; /* Ethernet external registers */ + u32 _unused4[0x3b00/4]; + + /* Per-peripheral device external registers and DMA/PIO control. */ + volatile u32 pbus_extregs[16][256]; + volatile u32 pbus_dmacfg[8][128]; + /* Cycles to spend in D3 for reads */ +#define HPC3_DMACFG_D3R_MASK 0x00000001 +#define HPC3_DMACFG_D3R_SHIFT 0 + /* Cycles to spend in D4 for reads */ +#define HPC3_DMACFG_D4R_MASK 0x0000001e +#define HPC3_DMACFG_D4R_SHIFT 1 + /* Cycles to spend in D5 for reads */ +#define HPC3_DMACFG_D5R_MASK 0x000001e0 +#define HPC3_DMACFG_D5R_SHIFT 5 + /* Cycles to spend in D3 for writes */ +#define HPC3_DMACFG_D3W_MASK 0x00000200 +#define HPC3_DMACFG_D3W_SHIFT 9 + /* Cycles to spend in D4 for writes */ +#define HPC3_DMACFG_D4W_MASK 0x00003c00 +#define HPC3_DMACFG_D4W_SHIFT 10 + /* Cycles to spend in D5 for writes */ +#define HPC3_DMACFG_D5W_MASK 0x0003c000 +#define HPC3_DMACFG_D5W_SHIFT 14 + /* Enable 16-bit DMA access mode */ +#define HPC3_DMACFG_DS16 0x00040000 + /* Places halfwords on high 16 bits of bus */ +#define HPC3_DMACFG_EVENHI 0x00080000 + /* Make this device real time */ +#define HPC3_DMACFG_RTIME 0x00200000 + /* 5 bit burst count for DMA device */ +#define HPC3_DMACFG_BURST_MASK 0x07c00000 +#define HPC3_DMACFG_BURST_SHIFT 22 + /* Use live pbus_dreq unsynchronized signal */ +#define HPC3_DMACFG_DRQLIVE 0x08000000 + volatile u32 pbus_piocfg[16][64]; + /* Cycles to spend in P2 state for reads */ +#define HPC3_PIOCFG_P2R_MASK 0x00001 +#define HPC3_PIOCFG_P2R_SHIFT 0 + /* Cycles to spend in P3 state for reads */ +#define HPC3_PIOCFG_P3R_MASK 0x0001e +#define HPC3_PIOCFG_P3R_SHIFT 1 + /* Cycles to spend in P4 state for reads */ +#define HPC3_PIOCFG_P4R_MASK 0x001e0 +#define HPC3_PIOCFG_P4R_SHIFT 5 + /* Cycles to spend in P2 state for writes */ +#define HPC3_PIOCFG_P2W_MASK 0x00200 +#define HPC3_PIOCFG_P2W_SHIFT 9 + /* Cycles to spend in P3 state for writes */ +#define HPC3_PIOCFG_P3W_MASK 0x03c00 +#define HPC3_PIOCFG_P3W_SHIFT 10 + /* Cycles to spend in P4 state for writes */ +#define HPC3_PIOCFG_P4W_MASK 0x3c000 +#define HPC3_PIOCFG_P4W_SHIFT 14 + /* Enable 16-bit PIO accesses */ +#define HPC3_PIOCFG_DS16 0x40000 + /* Place even address bits in bits <15:8> */ +#define HPC3_PIOCFG_EVENHI 0x80000 + + /* PBUS PROM control regs. */ + volatile u32 pbus_promwe; /* PROM write enable register */ +#define HPC3_PROM_WENAB 0x1 /* Enable writes to the PROM */ + + u32 _unused5[0x0800/4 - 1]; + volatile u32 pbus_promswap; /* Chip select swap reg */ +#define HPC3_PROM_SWAP 0x1 /* invert GIO addr bit to select prom0 or prom1 */ + + u32 _unused6[0x0800/4 - 1]; + volatile u32 pbus_gout; /* PROM general purpose output reg */ +#define HPC3_PROM_STAT 0x1 /* General purpose status bit in gout */ + + u32 _unused7[0x1000/4 - 1]; + volatile u32 rtcregs[14]; /* Dallas clock registers */ + u32 _unused8[50]; + volatile u32 bbram[8192-50-14]; /* Battery backed ram */ +}; + +/* + * It is possible to have two HPC3's within the address space on + * one machine, though only having one is more likely on an Indy. + */ +extern struct hpc3_regs *hpc3c0, *hpc3c1; +#define HPC3_CHIP0_BASE 0x1fb80000 /* physical */ +#define HPC3_CHIP1_BASE 0x1fb00000 /* physical */ + +extern void sgihpc_init(void); + +#endif /* _SGI_HPC3_H */ diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h new file mode 100644 index 000000000000..343ed15f8dc4 --- /dev/null +++ b/arch/mips/include/asm/sgi/ioc.h @@ -0,0 +1,200 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * ioc.h: Definitions for SGI I/O Controller + * + * Copyright (C) 1996 David S. Miller + * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle + * Copyright (C) 2001, 2003 Ladislav Michl + */ + +#ifndef _SGI_IOC_H +#define _SGI_IOC_H + +#include +#include + +/* + * All registers are 8-bit wide alligned on 32-bit boundary. Bad things + * happen if you try word access them. You have been warned. + */ + +struct sgioc_uart_regs { + u8 _ctrl1[3]; + volatile u8 ctrl1; + u8 _data1[3]; + volatile u8 data1; + u8 _ctrl2[3]; + volatile u8 ctrl2; + u8 _data2[3]; + volatile u8 data2; +}; + +struct sgioc_keyb_regs { + u8 _data[3]; + volatile u8 data; + u8 _command[3]; + volatile u8 command; +}; + +struct sgint_regs { + u8 _istat0[3]; + volatile u8 istat0; /* Interrupt status zero */ +#define SGINT_ISTAT0_FFULL 0x01 +#define SGINT_ISTAT0_SCSI0 0x02 +#define SGINT_ISTAT0_SCSI1 0x04 +#define SGINT_ISTAT0_ENET 0x08 +#define SGINT_ISTAT0_GFXDMA 0x10 +#define SGINT_ISTAT0_PPORT 0x20 +#define SGINT_ISTAT0_HPC2 0x40 +#define SGINT_ISTAT0_LIO2 0x80 + u8 _imask0[3]; + volatile u8 imask0; /* Interrupt mask zero */ + u8 _istat1[3]; + volatile u8 istat1; /* Interrupt status one */ +#define SGINT_ISTAT1_ISDNI 0x01 +#define SGINT_ISTAT1_PWR 0x02 +#define SGINT_ISTAT1_ISDNH 0x04 +#define SGINT_ISTAT1_LIO3 0x08 +#define SGINT_ISTAT1_HPC3 0x10 +#define SGINT_ISTAT1_AFAIL 0x20 +#define SGINT_ISTAT1_VIDEO 0x40 +#define SGINT_ISTAT1_GIO2 0x80 + u8 _imask1[3]; + volatile u8 imask1; /* Interrupt mask one */ + u8 _vmeistat[3]; + volatile u8 vmeistat; /* VME interrupt status */ + u8 _cmeimask0[3]; + volatile u8 cmeimask0; /* VME interrupt mask zero */ + u8 _cmeimask1[3]; + volatile u8 cmeimask1; /* VME interrupt mask one */ + u8 _cmepol[3]; + volatile u8 cmepol; /* VME polarity */ + u8 _tclear[3]; + volatile u8 tclear; + u8 _errstat[3]; + volatile u8 errstat; /* Error status reg, reserved on INT2 */ + u32 _unused0[2]; + u8 _tcnt0[3]; + volatile u8 tcnt0; /* counter 0 */ + u8 _tcnt1[3]; + volatile u8 tcnt1; /* counter 1 */ + u8 _tcnt2[3]; + volatile u8 tcnt2; /* counter 2 */ + u8 _tcword[3]; + volatile u8 tcword; /* control word */ +#define SGINT_TCWORD_BCD 0x01 /* Use BCD mode for counters */ +#define SGINT_TCWORD_MMASK 0x0e /* Mode bitmask. */ +#define SGINT_TCWORD_MITC 0x00 /* IRQ on terminal count (doesn't work) */ +#define SGINT_TCWORD_MOS 0x02 /* One-shot IRQ mode. */ +#define SGINT_TCWORD_MRGEN 0x04 /* Normal rate generation */ +#define SGINT_TCWORD_MSWGEN 0x06 /* Square wave generator mode */ +#define SGINT_TCWORD_MSWST 0x08 /* Software strobe */ +#define SGINT_TCWORD_MHWST 0x0a /* Hardware strobe */ +#define SGINT_TCWORD_CMASK 0x30 /* Command mask */ +#define SGINT_TCWORD_CLAT 0x00 /* Latch command */ +#define SGINT_TCWORD_CLSB 0x10 /* LSB read/write */ +#define SGINT_TCWORD_CMSB 0x20 /* MSB read/write */ +#define SGINT_TCWORD_CALL 0x30 /* Full counter read/write */ +#define SGINT_TCWORD_CNT0 0x00 /* Select counter zero */ +#define SGINT_TCWORD_CNT1 0x40 /* Select counter one */ +#define SGINT_TCWORD_CNT2 0x80 /* Select counter two */ +#define SGINT_TCWORD_CRBCK 0xc0 /* Readback command */ +}; + +/* + * The timer is the good old 8254. Unlike in PCs it's clocked at exactly 1MHz + */ +#define SGINT_TIMER_CLOCK 1000000 + +/* + * This is the constant we're using for calibrating the counter. + */ +#define SGINT_TCSAMP_COUNTER ((SGINT_TIMER_CLOCK / HZ) + 255) + +/* We need software copies of these because they are write only. */ +extern u8 sgi_ioc_reset, sgi_ioc_write; + +struct sgioc_regs { + struct pi1_regs pport; + u32 _unused0[2]; + struct sgioc_uart_regs uart; + struct sgioc_keyb_regs kbdmouse; + u8 _gcsel[3]; + volatile u8 gcsel; + u8 _genctrl[3]; + volatile u8 genctrl; + u8 _panel[3]; + volatile u8 panel; +#define SGIOC_PANEL_POWERON 0x01 +#define SGIOC_PANEL_POWERINTR 0x02 +#define SGIOC_PANEL_VOLDNINTR 0x10 +#define SGIOC_PANEL_VOLDNHOLD 0x20 +#define SGIOC_PANEL_VOLUPINTR 0x40 +#define SGIOC_PANEL_VOLUPHOLD 0x80 + u32 _unused1; + u8 _sysid[3]; + volatile u8 sysid; +#define SGIOC_SYSID_FULLHOUSE 0x01 +#define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1) +#define SGIOC_SYSID_CHIPREV(x) (((x) & 0xe0) >> 5) + u32 _unused2; + u8 _read[3]; + volatile u8 read; + u32 _unused3; + u8 _dmasel[3]; + volatile u8 dmasel; +#define SGIOC_DMASEL_SCLK10MHZ 0x00 /* use 10MHZ serial clock */ +#define SGIOC_DMASEL_ISDNB 0x01 /* enable isdn B */ +#define SGIOC_DMASEL_ISDNA 0x02 /* enable isdn A */ +#define SGIOC_DMASEL_PPORT 0x04 /* use parallel DMA */ +#define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */ +#define SGIOC_DMASEL_SCLKEXT 0x20 /* use external serial clock */ + u32 _unused4; + u8 _reset[3]; + volatile u8 reset; +#define SGIOC_RESET_PPORT 0x01 /* 0=parport reset, 1=nornal */ +#define SGIOC_RESET_KBDMOUSE 0x02 /* 0=kbdmouse reset, 1=normal */ +#define SGIOC_RESET_EISA 0x04 /* 0=eisa reset, 1=normal */ +#define SGIOC_RESET_ISDN 0x08 /* 0=isdn reset, 1=normal */ +#define SGIOC_RESET_LC0OFF 0x10 /* guiness: turn led off (red, else green) */ +#define SGIOC_RESET_LC1OFF 0x20 /* guiness: turn led off (green, else amber) */ + u32 _unused5; + u8 _write[3]; + volatile u8 write; +#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshhold */ +#define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */ +#define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */ +#define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */ +#define SGIOC_WRITE_U1AMODE 0x10 /* 1=PC 0=MAC UART mode */ +#define SGIOC_WRITE_U0AMODE 0x20 /* 1=PC 0=MAC UART mode */ +#define SGIOC_WRITE_MLO 0x40 /* 1=4.75V 0=+5V */ +#define SGIOC_WRITE_MHI 0x80 /* 1=5.25V 0=+5V */ + u32 _unused6; + struct sgint_regs int3; + u32 _unused7[16]; + volatile u32 extio; /* FullHouse only */ +#define EXTIO_S0_IRQ_3 0x8000 /* S0: vid.vsync */ +#define EXTIO_S0_IRQ_2 0x4000 /* S0: gfx.fifofull */ +#define EXTIO_S0_IRQ_1 0x2000 /* S0: gfx.int */ +#define EXTIO_S0_RETRACE 0x1000 +#define EXTIO_SG_IRQ_3 0x0800 /* SG: vid.vsync */ +#define EXTIO_SG_IRQ_2 0x0400 /* SG: gfx.fifofull */ +#define EXTIO_SG_IRQ_1 0x0200 /* SG: gfx.int */ +#define EXTIO_SG_RETRACE 0x0100 +#define EXTIO_GIO_33MHZ 0x0080 +#define EXTIO_EISA_BUSERR 0x0040 +#define EXTIO_MC_BUSERR 0x0020 +#define EXTIO_HPC3_BUSERR 0x0010 +#define EXTIO_S0_STAT_1 0x0008 +#define EXTIO_S0_STAT_0 0x0004 +#define EXTIO_SG_STAT_1 0x0002 +#define EXTIO_SG_STAT_0 0x0001 +}; + +extern struct sgioc_regs *sgioc; +extern struct sgint_regs *sgint; + +#endif diff --git a/arch/mips/include/asm/sgi/ip22.h b/arch/mips/include/asm/sgi/ip22.h new file mode 100644 index 000000000000..c0501f91719b --- /dev/null +++ b/arch/mips/include/asm/sgi/ip22.h @@ -0,0 +1,78 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * ip22.h: Definitions for SGI IP22 machines + * + * Copyright (C) 1996 David S. Miller + * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle + */ + +#ifndef _SGI_IP22_H +#define _SGI_IP22_H + +/* + * These are the virtual IRQ numbers, we divide all IRQ's into + * 'spaces', the 'space' determines where and how to enable/disable + * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrupts + * are not supported this way. Driver is supposed to allocate HPC/MC + * interrupt as shareable and then look to proper status bit (see + * HAL2 driver). This will prevent many complications, trust me ;-) + */ + +#include +#include + +#define SGINT_EISA 0 /* 16 EISA irq levels (Indigo2) */ +#define SGINT_CPU MIPS_CPU_IRQ_BASE /* MIPS CPU define 8 interrupt sources */ +#define SGINT_LOCAL0 (SGINT_CPU+8) /* 8 local0 irq levels */ +#define SGINT_LOCAL1 (SGINT_CPU+16) /* 8 local1 irq levels */ +#define SGINT_LOCAL2 (SGINT_CPU+24) /* 8 local2 vectored irq levels */ +#define SGINT_LOCAL3 (SGINT_CPU+32) /* 8 local3 vectored irq levels */ +#define SGINT_END (SGINT_CPU+40) /* End of 'spaces' */ + +/* + * Individual interrupt definitions for the Indy and Indigo2 + */ + +#define SGI_SOFT_0_IRQ SGINT_CPU + 0 +#define SGI_SOFT_1_IRQ SGINT_CPU + 1 +#define SGI_LOCAL_0_IRQ SGINT_CPU + 2 +#define SGI_LOCAL_1_IRQ SGINT_CPU + 3 +#define SGI_8254_0_IRQ SGINT_CPU + 4 +#define SGI_8254_1_IRQ SGINT_CPU + 5 +#define SGI_BUSERR_IRQ SGINT_CPU + 6 +#define SGI_TIMER_IRQ SGINT_CPU + 7 + +#define SGI_FIFO_IRQ SGINT_LOCAL0 + 0 /* FIFO full */ +#define SGI_GIO_0_IRQ SGI_FIFO_IRQ /* GIO-0 */ +#define SGI_WD93_0_IRQ SGINT_LOCAL0 + 1 /* 1st onboard WD93 */ +#define SGI_WD93_1_IRQ SGINT_LOCAL0 + 2 /* 2nd onboard WD93 */ +#define SGI_ENET_IRQ SGINT_LOCAL0 + 3 /* onboard ethernet */ +#define SGI_MCDMA_IRQ SGINT_LOCAL0 + 4 /* MC DMA done */ +#define SGI_PARPORT_IRQ SGINT_LOCAL0 + 5 /* Parallel port */ +#define SGI_GIO_1_IRQ SGINT_LOCAL0 + 6 /* GE / GIO-1 / 2nd-HPC */ +#define SGI_MAP_0_IRQ SGINT_LOCAL0 + 7 /* Mappable interrupt 0 */ + +#define SGI_GPL0_IRQ SGINT_LOCAL1 + 0 /* General Purpose LOCAL1_N<0> */ +#define SGI_PANEL_IRQ SGINT_LOCAL1 + 1 /* front panel */ +#define SGI_GPL2_IRQ SGINT_LOCAL1 + 2 /* General Purpose LOCAL1_N<2> */ +#define SGI_MAP_1_IRQ SGINT_LOCAL1 + 3 /* Mappable interrupt 1 */ +#define SGI_HPCDMA_IRQ SGINT_LOCAL1 + 4 /* HPC DMA done */ +#define SGI_ACFAIL_IRQ SGINT_LOCAL1 + 5 /* AC fail */ +#define SGI_VINO_IRQ SGINT_LOCAL1 + 6 /* Indy VINO */ +#define SGI_GIO_2_IRQ SGINT_LOCAL1 + 7 /* Vert retrace / GIO-2 */ + +/* Mapped interrupts. These interrupts may be mapped to either 0, or 1 */ +#define SGI_VERT_IRQ SGINT_LOCAL2 + 0 /* INT3: newport vertical status */ +#define SGI_EISA_IRQ SGINT_LOCAL2 + 3 /* EISA interrupts */ +#define SGI_KEYBD_IRQ SGINT_LOCAL2 + 4 /* keyboard */ +#define SGI_SERIAL_IRQ SGINT_LOCAL2 + 5 /* onboard serial */ + +#define ip22_is_fullhouse() (sgioc->sysid & SGIOC_SYSID_FULLHOUSE) + +extern unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg); +extern unsigned short ip22_nvram_read(int reg); + +#endif diff --git a/arch/mips/include/asm/sgi/mc.h b/arch/mips/include/asm/sgi/mc.h new file mode 100644 index 000000000000..1576c2394de8 --- /dev/null +++ b/arch/mips/include/asm/sgi/mc.h @@ -0,0 +1,231 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * mc.h: Definitions for SGI Memory Controller + * + * Copyright (C) 1996 David S. Miller + * Copyright (C) 1999 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ + +#ifndef _SGI_MC_H +#define _SGI_MC_H + +struct sgimc_regs { + u32 _unused0; + volatile u32 cpuctrl0; /* CPU control register 0, readwrite */ +#define SGIMC_CCTRL0_REFS 0x0000000f /* REFS mask */ +#define SGIMC_CCTRL0_EREFRESH 0x00000010 /* Memory refresh enable */ +#define SGIMC_CCTRL0_EPERRGIO 0x00000020 /* GIO parity error enable */ +#define SGIMC_CCTRL0_EPERRMEM 0x00000040 /* Main mem parity error enable */ +#define SGIMC_CCTRL0_EPERRCPU 0x00000080 /* CPU bus parity error enable */ +#define SGIMC_CCTRL0_WDOG 0x00000100 /* Watchdog timer enable */ +#define SGIMC_CCTRL0_SYSINIT 0x00000200 /* System init bit */ +#define SGIMC_CCTRL0_GFXRESET 0x00000400 /* Graphics interface reset */ +#define SGIMC_CCTRL0_EISALOCK 0x00000800 /* Lock CPU from memory for EISA */ +#define SGIMC_CCTRL0_EPERRSCMD 0x00001000 /* SysCMD bus parity error enable */ +#define SGIMC_CCTRL0_IENAB 0x00002000 /* Allow interrupts from MC */ +#define SGIMC_CCTRL0_ESNOOP 0x00004000 /* Snooping I/O enable */ +#define SGIMC_CCTRL0_EPROMWR 0x00008000 /* Prom writes from cpu enable */ +#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */ +#define SGIMC_CCTRL0_LENDIAN 0x00020000 /* Put MC in little-endian mode */ +#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */ +#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */ +#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */ +#define SGIMC_CCTRL0_GIOBTOB 0x08000000 /* Allow GIO back to back writes */ + u32 _unused1; + volatile u32 cpuctrl1; /* CPU control register 1, readwrite */ +#define SGIMC_CCTRL1_EGIOTIMEO 0x00000010 /* GIO bus timeout enable */ +#define SGIMC_CCTRL1_FIXEDEHPC 0x00001000 /* Fixed HPC endianness */ +#define SGIMC_CCTRL1_LITTLEHPC 0x00002000 /* Little endian HPC */ +#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */ +#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */ +#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */ +#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */ + + u32 _unused2; + volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */ + + u32 _unused3; + volatile u32 systemid; /* MC system ID register, readonly */ +#define SGIMC_SYSID_MASKREV 0x0000000f /* Revision of MC controller */ +#define SGIMC_SYSID_EPRESENT 0x00000010 /* Indicates presence of EISA bus */ + + u32 _unused4[3]; + volatile u32 divider; /* Divider reg for RPSS */ + + u32 _unused5; + u32 eeprom; /* EEPROM byte reg for r4k */ +#define SGIMC_EEPROM_PRE 0x00000001 /* eeprom chip PRE pin assertion */ +#define SGIMC_EEPROM_CSEL 0x00000002 /* Active high, eeprom chip select */ +#define SGIMC_EEPROM_SECLOCK 0x00000004 /* EEPROM serial clock */ +#define SGIMC_EEPROM_SDATAO 0x00000008 /* Serial EEPROM data-out */ +#define SGIMC_EEPROM_SDATAI 0x00000010 /* Serial EEPROM data-in */ + + u32 _unused6[3]; + volatile u32 rcntpre; /* Preload refresh counter */ + + u32 _unused7; + volatile u32 rcounter; /* Readonly refresh counter */ + + u32 _unused8[13]; + volatile u32 giopar; /* Parameter word for GIO64 */ +#define SGIMC_GIOPAR_HPC64 0x00000001 /* HPC talks to GIO using 64-bits */ +#define SGIMC_GIOPAR_GFX64 0x00000002 /* GFX talks to GIO using 64-bits */ +#define SGIMC_GIOPAR_EXP064 0x00000004 /* EXP(slot0) talks using 64-bits */ +#define SGIMC_GIOPAR_EXP164 0x00000008 /* EXP(slot1) talks using 64-bits */ +#define SGIMC_GIOPAR_EISA64 0x00000010 /* EISA bus talks 64-bits to GIO */ +#define SGIMC_GIOPAR_HPC264 0x00000020 /* 2nd HPX talks 64-bits to GIO */ +#define SGIMC_GIOPAR_RTIMEGFX 0x00000040 /* GFX device has realtime attr */ +#define SGIMC_GIOPAR_RTIMEEXP0 0x00000080 /* EXP(slot0) has realtime attr */ +#define SGIMC_GIOPAR_RTIMEEXP1 0x00000100 /* EXP(slot1) has realtime attr */ +#define SGIMC_GIOPAR_MASTEREISA 0x00000200 /* EISA bus can act as bus master */ +#define SGIMC_GIOPAR_ONEBUS 0x00000400 /* Exists one GIO64 pipelined bus */ +#define SGIMC_GIOPAR_MASTERGFX 0x00000800 /* GFX can act as a bus master */ +#define SGIMC_GIOPAR_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */ +#define SGIMC_GIOPAR_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */ +#define SGIMC_GIOPAR_PLINEEXP0 0x00004000 /* EXP(slot0) has pipeline attr */ +#define SGIMC_GIOPAR_PLINEEXP1 0x00008000 /* EXP(slot1) has pipeline attr */ + + u32 _unused9; + volatile u32 cputp; /* CPU bus arb time period */ + + u32 _unused10[3]; + volatile u32 lbursttp; /* Time period for long bursts */ + + /* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must + * be the same size. The size encoding for supported SIMMs is bellow */ + u32 _unused11[9]; + volatile u32 mconfig0; /* Memory config register zero */ + u32 _unused12; + volatile u32 mconfig1; /* Memory config register one */ +#define SGIMC_MCONFIG_BASEADDR 0x000000ff /* Base address of bank*/ +#define SGIMC_MCONFIG_RMASK 0x00001f00 /* Ram config bitmask */ +#define SGIMC_MCONFIG_BVALID 0x00002000 /* Bank is valid */ +#define SGIMC_MCONFIG_SBANKS 0x00004000 /* Number of subbanks */ + + u32 _unused13; + volatile u32 cmacc; /* Mem access config for CPU */ + u32 _unused14; + volatile u32 gmacc; /* Mem access config for GIO */ + + /* This define applies to both cmacc and gmacc registers above. */ +#define SGIMC_MACC_ALIASBIG 0x20000000 /* 512MB home for alias */ + + /* Error address/status regs from GIO and CPU perspectives. */ + u32 _unused15; + volatile u32 cerr; /* Error address reg for CPU */ + u32 _unused16; + volatile u32 cstat; /* Status reg for CPU */ +#define SGIMC_CSTAT_RD 0x00000100 /* read parity error */ +#define SGIMC_CSTAT_PAR 0x00000200 /* CPU parity error */ +#define SGIMC_CSTAT_ADDR 0x00000400 /* memory bus error bad addr */ +#define SGIMC_CSTAT_SYSAD_PAR 0x00000800 /* sysad parity error */ +#define SGIMC_CSTAT_SYSCMD_PAR 0x00001000 /* syscmd parity error */ +#define SGIMC_CSTAT_BAD_DATA 0x00002000 /* bad data identifier */ +#define SGIMC_CSTAT_PAR_MASK 0x00001f00 /* parity error mask */ +#define SGIMC_CSTAT_RD_PAR (SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR) + + u32 _unused17; + volatile u32 gerr; /* Error address reg for GIO */ + u32 _unused18; + volatile u32 gstat; /* Status reg for GIO */ +#define SGIMC_GSTAT_RD 0x00000100 /* read parity error */ +#define SGIMC_GSTAT_WR 0x00000200 /* write parity error */ +#define SGIMC_GSTAT_TIME 0x00000400 /* GIO bus timed out */ +#define SGIMC_GSTAT_PROM 0x00000800 /* write to PROM when PROM_EN not set */ +#define SGIMC_GSTAT_ADDR 0x00001000 /* parity error on addr cycle */ +#define SGIMC_GSTAT_BC 0x00002000 /* parity error on byte count cycle */ +#define SGIMC_GSTAT_PIO_RD 0x00004000 /* read data parity on pio */ +#define SGIMC_GSTAT_PIO_WR 0x00008000 /* write data parity on pio */ + + /* Special hard bus locking registers. */ + u32 _unused19; + volatile u32 syssembit; /* Uni-bit system semaphore */ + u32 _unused20; + volatile u32 mlock; /* Global GIO memory access lock */ + u32 _unused21; + volatile u32 elock; /* Locks EISA from GIO accesses */ + + /* GIO dma control registers. */ + u32 _unused22[15]; + volatile u32 gio_dma_trans; /* DMA mask to translation GIO addrs */ + u32 _unused23; + volatile u32 gio_dma_sbits; /* DMA GIO addr substitution bits */ + u32 _unused24; + volatile u32 dma_intr_cause; /* DMA IRQ cause indicator bits */ + u32 _unused25; + volatile u32 dma_ctrl; /* Main DMA control reg */ + + /* DMA TLB entry 0 */ + u32 _unused26[5]; + volatile u32 dtlb_hi0; + u32 _unused27; + volatile u32 dtlb_lo0; + + /* DMA TLB entry 1 */ + u32 _unused28; + volatile u32 dtlb_hi1; + u32 _unused29; + volatile u32 dtlb_lo1; + + /* DMA TLB entry 2 */ + u32 _unused30; + volatile u32 dtlb_hi2; + u32 _unused31; + volatile u32 dtlb_lo2; + + /* DMA TLB entry 3 */ + u32 _unused32; + volatile u32 dtlb_hi3; + u32 _unused33; + volatile u32 dtlb_lo3; + + u32 _unused34[0x0392]; + + u32 _unused35; + volatile u32 rpsscounter; /* Chirps at 100ns */ + + u32 _unused36[0x1000/4-2*4]; + + u32 _unused37; + volatile u32 maddronly; /* Address DMA goes at */ + u32 _unused38; + volatile u32 maddrpdeflts; /* Same as above, plus set defaults */ + u32 _unused39; + volatile u32 dmasz; /* DMA count */ + u32 _unused40; + volatile u32 ssize; /* DMA stride size */ + u32 _unused41; + volatile u32 gmaddronly; /* Set GIO DMA but don't start trans */ + u32 _unused42; + volatile u32 dmaddnpgo; /* Set GIO DMA addr + start transfer */ + u32 _unused43; + volatile u32 dmamode; /* DMA mode config bit settings */ + u32 _unused44; + volatile u32 dmaccount; /* Zoom and byte count for DMA */ + u32 _unused45; + volatile u32 dmastart; /* Pedal to the metal. */ + u32 _unused46; + volatile u32 dmarunning; /* DMA op is in progress */ + u32 _unused47; + volatile u32 maddrdefstart; /* Set dma addr, defaults, and kick it */ +}; + +extern struct sgimc_regs *sgimc; +#define SGIMC_BASE 0x1fa00000 /* physical */ + +/* Base location of the two ram banks found in IP2[0268] machines. */ +#define SGIMC_SEG0_BADDR 0x08000000 +#define SGIMC_SEG1_BADDR 0x20000000 + +/* Maximum size of the above banks are per machine. */ +#define SGIMC_SEG0_SIZE_ALL 0x10000000 /* 256MB */ +#define SGIMC_SEG1_SIZE_IP20_IP22 0x08000000 /* 128MB */ +#define SGIMC_SEG1_SIZE_IP26_IP28 0x20000000 /* 512MB */ + +extern void sgimc_init(void); + +#endif /* _SGI_MC_H */ diff --git a/arch/mips/include/asm/sgi/pi1.h b/arch/mips/include/asm/sgi/pi1.h new file mode 100644 index 000000000000..c9506915dc5c --- /dev/null +++ b/arch/mips/include/asm/sgi/pi1.h @@ -0,0 +1,71 @@ +/* + * pi1.h: Definitions for SGI PI1 parallel port + */ + +#ifndef _SGI_PI1_H +#define _SGI_PI1_H + +struct pi1_regs { + u8 _data[3]; + volatile u8 data; + u8 _ctrl[3]; + volatile u8 ctrl; +#define PI1_CTRL_STROBE_N 0x01 +#define PI1_CTRL_AFD_N 0x02 +#define PI1_CTRL_INIT_N 0x04 +#define PI1_CTRL_SLIN_N 0x08 +#define PI1_CTRL_IRQ_ENA 0x10 +#define PI1_CTRL_DIR 0x20 +#define PI1_CTRL_SEL 0x40 + u8 _status[3]; + volatile u8 status; +#define PI1_STAT_DEVID 0x03 /* bits 0-1 */ +#define PI1_STAT_NOINK 0x04 /* SGI MODE only */ +#define PI1_STAT_ERROR 0x08 +#define PI1_STAT_ONLINE 0x10 +#define PI1_STAT_PE 0x20 +#define PI1_STAT_ACK 0x40 +#define PI1_STAT_BUSY 0x80 + u8 _dmactrl[3]; + volatile u8 dmactrl; +#define PI1_DMACTRL_FIFO_EMPTY 0x01 /* fifo empty R/O */ +#define PI1_DMACTRL_ABORT 0x02 /* reset DMA and internal fifo W/O */ +#define PI1_DMACTRL_STDMODE 0x00 /* bits 2-3 */ +#define PI1_DMACTRL_SGIMODE 0x04 /* bits 2-3 */ +#define PI1_DMACTRL_RICOHMODE 0x08 /* bits 2-3 */ +#define PI1_DMACTRL_HPMODE 0x0c /* bits 2-3 */ +#define PI1_DMACTRL_BLKMODE 0x10 /* block mode */ +#define PI1_DMACTRL_FIFO_CLEAR 0x20 /* clear fifo W/O */ +#define PI1_DMACTRL_READ 0x40 /* read */ +#define PI1_DMACTRL_RUN 0x80 /* pedal to the metal */ + u8 _intstat[3]; + volatile u8 intstat; +#define PI1_INTSTAT_ACK 0x04 +#define PI1_INTSTAT_FEMPTY 0x08 +#define PI1_INTSTAT_NOINK 0x10 +#define PI1_INTSTAT_ONLINE 0x20 +#define PI1_INTSTAT_ERR 0x40 +#define PI1_INTSTAT_PE 0x80 + u8 _intmask[3]; + volatile u8 intmask; /* enabled low, reset high*/ +#define PI1_INTMASK_ACK 0x04 +#define PI1_INTMASK_FIFO_EMPTY 0x08 +#define PI1_INTMASK_NOINK 0x10 +#define PI1_INTMASK_ONLINE 0x20 +#define PI1_INTMASK_ERR 0x40 +#define PI1_INTMASK_PE 0x80 + u8 _timer1[3]; + volatile u8 timer1; +#define PI1_TIME1 0x27 + u8 _timer2[3]; + volatile u8 timer2; +#define PI1_TIME2 0x13 + u8 _timer3[3]; + volatile u8 timer3; +#define PI1_TIME3 0x10 + u8 _timer4[3]; + volatile u8 timer4; +#define PI1_TIME4 0x00 +}; + +#endif diff --git a/arch/mips/include/asm/sgi/seeq.h b/arch/mips/include/asm/sgi/seeq.h new file mode 100644 index 000000000000..af0ffd76899d --- /dev/null +++ b/arch/mips/include/asm/sgi/seeq.h @@ -0,0 +1,21 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 by Ralf Baechle + */ +#ifndef __ASM_SGI_SEEQ_H +#define __ASM_SGI_SEEQ_H + +#include + +#include + +struct sgiseeq_platform_data { + struct hpc3_regs *hpc; + unsigned int irq; + unsigned char mac[ETH_ALEN]; +}; + +#endif /* __ASM_SGI_SEEQ_H */ diff --git a/arch/mips/include/asm/sgi/sgi.h b/arch/mips/include/asm/sgi/sgi.h new file mode 100644 index 000000000000..645cea7c0f8e --- /dev/null +++ b/arch/mips/include/asm/sgi/sgi.h @@ -0,0 +1,47 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * sgi.h: Definitions specific to SGI machines. + * + * Copyright (C) 1996 David S. Miller (dm@sgi.com) + */ +#ifndef _ASM_SGI_SGI_H +#define _ASM_SGI_SGI_H + +/* UP=UniProcessor MP=MultiProcessor(capable) */ +enum sgi_mach { + ip4, /* R2k UP */ + ip5, /* R2k MP */ + ip6, /* R3k UP */ + ip7, /* R3k MP */ + ip9, /* R3k UP */ + ip12, /* R3kA UP, Indigo */ + ip15, /* R3kA MP */ + ip17, /* R4K UP */ + ip19, /* R4K MP */ + ip20, /* R4K UP, Indigo */ + ip21, /* TFP MP */ + ip22, /* R4x00 UP, Indigo2 */ + ip25, /* R10k MP */ + ip26, /* TFP UP, Indigo2 */ + ip27, /* R10k MP, R12k MP, Origin */ + ip28, /* R10k UP, Indigo2 */ + ip30, /* Octane */ + ip32, /* O2 */ +}; + +extern enum sgi_mach sgimach; +extern void sgi_sysinit(void); + +/* Many I/O space registers are byte sized and are contained within + * one byte per word, specifically the MSB, this macro helps out. + */ +#ifdef __MIPSEL__ +#define SGI_MSB(regaddr) (regaddr) +#else +#define SGI_MSB(regaddr) ((regaddr) | 0x3) +#endif + +#endif /* _ASM_SGI_SGI_H */ diff --git a/arch/mips/include/asm/sgi/wd.h b/arch/mips/include/asm/sgi/wd.h new file mode 100644 index 000000000000..0d6c3a4da891 --- /dev/null +++ b/arch/mips/include/asm/sgi/wd.h @@ -0,0 +1,20 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 by Ralf Baechle + */ +#ifndef __ASM_SGI_WD_H +#define __ASM_SGI_WD_H + +#include + +struct sgiwd93_platform_data { + unsigned int unit; + unsigned int irq; + struct hpc3_scsiregs *hregs; + unsigned char *wdregs; +}; + +#endif /* __ASM_SGI_WD_H */ diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h new file mode 100644 index 000000000000..bfce5c786f1c --- /dev/null +++ b/arch/mips/include/asm/sgialib.h @@ -0,0 +1,124 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI ARCS firmware interface library for the Linux kernel. + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 2001, 2002 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_SGIALIB_H +#define _ASM_SGIALIB_H + +#include + +extern struct linux_romvec *romvec; +extern int prom_argc; + +extern LONG *_prom_argv, *_prom_envp; + +/* A 32-bit ARC PROM pass arguments and environment as 32-bit pointer. + These macros take care of sign extension. */ +#define prom_argv(index) ((char *) (long) _prom_argv[(index)]) +#define prom_argc(index) ((char *) (long) _prom_argc[(index)]) + +extern int prom_flags; + +#define PROM_FLAG_ARCS 1 +#define PROM_FLAG_USE_AS_CONSOLE 2 +#define PROM_FLAG_DONT_FREE_TEMP 4 + +/* Simple char-by-char console I/O. */ +extern void prom_putchar(char c); +extern char prom_getchar(void); + +/* Memory descriptor management. */ +#define PROM_MAX_PMEMBLOCKS 32 +struct prom_pmemblock { + LONG base; /* Within KSEG0 or XKPHYS. */ + ULONG size; /* In bytes. */ + ULONG type; /* free or prom memory */ +}; + +/* Get next memory descriptor after CURR, returns first descriptor + * in chain is CURR is NULL. + */ +extern struct linux_mdesc *prom_getmdesc(struct linux_mdesc *curr); +#define PROM_NULL_MDESC ((struct linux_mdesc *) 0) + +/* Called by prom_init to setup the physical memory pmemblock + * array. + */ +extern void prom_meminit(void); +extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); + +/* PROM device tree library routines. */ +#define PROM_NULL_COMPONENT ((pcomponent *) 0) + +/* Get sibling component of THIS. */ +extern pcomponent *ArcGetPeer(pcomponent *this); + +/* Get child component of THIS. */ +extern pcomponent *ArcGetChild(pcomponent *this); + +/* Get parent component of CHILD. */ +extern pcomponent *prom_getparent(pcomponent *child); + +/* Copy component opaque data of component THIS into BUFFER + * if component THIS has opaque data. Returns success or + * failure status. + */ +extern long prom_getcdata(void *buffer, pcomponent *this); + +/* Other misc. component routines. */ +extern pcomponent *prom_childadd(pcomponent *this, pcomponent *tmp, void *data); +extern long prom_delcomponent(pcomponent *this); +extern pcomponent *prom_componentbypath(char *path); + +/* This is called at prom_init time to identify the + * ARC architecture we are running on + */ +extern void prom_identify_arch(void); + +/* Environment variable routines. */ +extern PCHAR ArcGetEnvironmentVariable(PCHAR name); +extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value); + +/* ARCS command line acquisition and parsing. */ +extern char *prom_getcmdline(void); +extern void prom_init_cmdline(void); + +/* Acquiring info about the current time, etc. */ +extern struct linux_tinfo *prom_gettinfo(void); +extern unsigned long prom_getrtime(void); + +/* File operations. */ +extern long prom_getvdirent(unsigned long fd, struct linux_vdirent *ent, unsigned long num, unsigned long *cnt); +extern long prom_open(char *name, enum linux_omode md, unsigned long *fd); +extern long prom_close(unsigned long fd); +extern LONG ArcRead(ULONG fd, PVOID buf, ULONG num, PULONG cnt); +extern long prom_getrstatus(unsigned long fd); +extern LONG ArcWrite(ULONG fd, PVOID buf, ULONG num, PULONG cnt); +extern long prom_seek(unsigned long fd, struct linux_bigint *off, enum linux_seekmode sm); +extern long prom_mount(char *name, enum linux_mountops op); +extern long prom_getfinfo(unsigned long fd, struct linux_finfo *buf); +extern long prom_setfinfo(unsigned long fd, unsigned long flags, unsigned long msk); + +/* Running stand-along programs. */ +extern long prom_load(char *name, unsigned long end, unsigned long *pc, unsigned long *eaddr); +extern long prom_invoke(unsigned long pc, unsigned long sp, long argc, char **argv, char **envp); +extern long prom_exec(char *name, long argc, char **argv, char **envp); + +/* Misc. routines. */ +extern VOID prom_halt(VOID) __attribute__((noreturn)); +extern VOID prom_powerdown(VOID) __attribute__((noreturn)); +extern VOID prom_restart(VOID) __attribute__((noreturn)); +extern VOID ArcReboot(VOID) __attribute__((noreturn)); +extern VOID ArcEnterInteractiveMode(VOID) __attribute__((noreturn)); +extern long prom_cfgsave(VOID); +extern struct linux_sysid *prom_getsysid(VOID); +extern VOID ArcFlushAllCaches(VOID); +extern DISPLAY_STATUS *ArcGetDisplayStatus(ULONG FileID); + +#endif /* _ASM_SGIALIB_H */ diff --git a/arch/mips/include/asm/sgiarcs.h b/arch/mips/include/asm/sgiarcs.h new file mode 100644 index 000000000000..721327f88601 --- /dev/null +++ b/arch/mips/include/asm/sgiarcs.h @@ -0,0 +1,548 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * ARC firmware interface defines. + * + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1999, 2001 Ralf Baechle (ralf@gnu.org) + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_SGIARCS_H +#define _ASM_SGIARCS_H + +#include +#include + +/* Various ARCS error codes. */ +#define PROM_ESUCCESS 0x00 +#define PROM_E2BIG 0x01 +#define PROM_EACCESS 0x02 +#define PROM_EAGAIN 0x03 +#define PROM_EBADF 0x04 +#define PROM_EBUSY 0x05 +#define PROM_EFAULT 0x06 +#define PROM_EINVAL 0x07 +#define PROM_EIO 0x08 +#define PROM_EISDIR 0x09 +#define PROM_EMFILE 0x0a +#define PROM_EMLINK 0x0b +#define PROM_ENAMETOOLONG 0x0c +#define PROM_ENODEV 0x0d +#define PROM_ENOENT 0x0e +#define PROM_ENOEXEC 0x0f +#define PROM_ENOMEM 0x10 +#define PROM_ENOSPC 0x11 +#define PROM_ENOTDIR 0x12 +#define PROM_ENOTTY 0x13 +#define PROM_ENXIO 0x14 +#define PROM_EROFS 0x15 +/* SGI ARCS specific errno's. */ +#define PROM_EADDRNOTAVAIL 0x1f +#define PROM_ETIMEDOUT 0x20 +#define PROM_ECONNABORTED 0x21 +#define PROM_ENOCONNECT 0x22 + +/* Device classes, types, and identifiers for prom + * device inventory queries. + */ +enum linux_devclass { + system, processor, cache, adapter, controller, peripheral, memory +}; + +enum linux_devtypes { + /* Generic stuff. */ + Arc, Cpu, Fpu, + + /* Primary insn and data caches. */ + picache, pdcache, + + /* Secondary insn, data, and combined caches. */ + sicache, sdcache, sccache, + + memdev, eisa_adapter, tc_adapter, scsi_adapter, dti_adapter, + multifunc_adapter, dsk_controller, tp_controller, cdrom_controller, + worm_controller, serial_controller, net_controller, disp_controller, + parallel_controller, ptr_controller, kbd_controller, audio_controller, + misc_controller, disk_peripheral, flpy_peripheral, tp_peripheral, + modem_peripheral, monitor_peripheral, printer_peripheral, + ptr_peripheral, kbd_peripheral, term_peripheral, line_peripheral, + net_peripheral, misc_peripheral, anon +}; + +enum linux_identifier { + bogus, ronly, removable, consin, consout, input, output +}; + +/* A prom device tree component. */ +struct linux_component { + enum linux_devclass class; /* node class */ + enum linux_devtypes type; /* node type */ + enum linux_identifier iflags; /* node flags */ + USHORT vers; /* node version */ + USHORT rev; /* node revision */ + ULONG key; /* completely magic */ + ULONG amask; /* XXX affinity mask??? */ + ULONG cdsize; /* size of configuration data */ + ULONG ilen; /* length of string identifier */ + _PULONG iname; /* string identifier */ +}; +typedef struct linux_component pcomponent; + +struct linux_sysid { + char vend[8], prod[8]; +}; + +/* ARCS prom memory descriptors. */ +enum arcs_memtypes { + arcs_eblock, /* exception block */ + arcs_rvpage, /* ARCS romvec page */ + arcs_fcontig, /* Contiguous and free */ + arcs_free, /* Generic free memory */ + arcs_bmem, /* Borken memory, don't use */ + arcs_prog, /* A loaded program resides here */ + arcs_atmp, /* ARCS temporary storage area, wish Sparc OpenBoot told this */ + arcs_aperm, /* ARCS permanent storage... */ +}; + +/* ARC has slightly different types than ARCS */ +enum arc_memtypes { + arc_eblock, /* exception block */ + arc_rvpage, /* romvec page */ + arc_free, /* Generic free memory */ + arc_bmem, /* Borken memory, don't use */ + arc_prog, /* A loaded program resides here */ + arc_atmp, /* temporary storage area */ + arc_aperm, /* permanent storage */ + arc_fcontig, /* Contiguous and free */ +}; + +union linux_memtypes { + enum arcs_memtypes arcs; + enum arc_memtypes arc; +}; + +struct linux_mdesc { + union linux_memtypes type; + ULONG base; + ULONG pages; +}; + +/* Time of day descriptor. */ +struct linux_tinfo { + unsigned short yr; + unsigned short mnth; + unsigned short day; + unsigned short hr; + unsigned short min; + unsigned short sec; + unsigned short msec; +}; + +/* ARCS virtual dirents. */ +struct linux_vdirent { + ULONG namelen; + unsigned char attr; + char fname[32]; /* XXX imperical, should be a define */ +}; + +/* Other stuff for files. */ +enum linux_omode { + rdonly, wronly, rdwr, wronly_creat, rdwr_creat, + wronly_ssede, rdwr_ssede, dirent, dirent_creat +}; + +enum linux_seekmode { + absolute, relative +}; + +enum linux_mountops { + media_load, media_unload +}; + +/* This prom has a bolixed design. */ +struct linux_bigint { +#ifdef __MIPSEL__ + u32 lo; + s32 hi; +#else /* !(__MIPSEL__) */ + s32 hi; + u32 lo; +#endif +}; + +struct linux_finfo { + struct linux_bigint begin; + struct linux_bigint end; + struct linux_bigint cur; + enum linux_devtypes dtype; + unsigned long namelen; + unsigned char attr; + char name[32]; /* XXX imperical, should be define */ +}; + +/* This describes the vector containing function pointers to the ARC + firmware functions. */ +struct linux_romvec { + LONG load; /* Load an executable image. */ + LONG invoke; /* Invoke a standalong image. */ + LONG exec; /* Load and begin execution of a + standalone image. */ + LONG halt; /* Halt the machine. */ + LONG pdown; /* Power down the machine. */ + LONG restart; /* XXX soft reset??? */ + LONG reboot; /* Reboot the machine. */ + LONG imode; /* Enter PROM interactive mode. */ + LONG _unused1; /* Was ReturnFromMain(). */ + + /* PROM device tree interface. */ + LONG next_component; + LONG child_component; + LONG parent_component; + LONG component_data; + LONG child_add; + LONG comp_del; + LONG component_by_path; + + /* Misc. stuff. */ + LONG cfg_save; + LONG get_sysid; + + /* Probing for memory. */ + LONG get_mdesc; + LONG _unused2; /* was Signal() */ + + LONG get_tinfo; + LONG get_rtime; + + /* File type operations. */ + LONG get_vdirent; + LONG open; + LONG close; + LONG read; + LONG get_rstatus; + LONG write; + LONG seek; + LONG mount; + + /* Dealing with firmware environment variables. */ + LONG get_evar; + LONG set_evar; + + LONG get_finfo; + LONG set_finfo; + + /* Miscellaneous. */ + LONG cache_flush; + LONG TestUnicodeCharacter; /* ARC; not sure if ARCS too */ + LONG GetDisplayStatus; +}; + +/* The SGI ARCS parameter block is in a fixed location for standalone + * programs to access PROM facilities easily. + */ +typedef struct _SYSTEM_PARAMETER_BLOCK { + ULONG magic; /* magic cookie */ +#define PROMBLOCK_MAGIC 0x53435241 + + ULONG len; /* length of parm block */ + USHORT ver; /* ARCS firmware version */ + USHORT rev; /* ARCS firmware revision */ + _PLONG rs_block; /* Restart block. */ + _PLONG dbg_block; /* Debug block. */ + _PLONG gevect; /* XXX General vector??? */ + _PLONG utlbvect; /* XXX UTLB vector??? */ + ULONG rveclen; /* Size of romvec struct. */ + _PVOID romvec; /* Function interface. */ + ULONG pveclen; /* Length of private vector. */ + _PVOID pvector; /* Private vector. */ + ULONG adap_cnt; /* Adapter count. */ + ULONG adap_typ0; /* First adapter type. */ + ULONG adap_vcnt0; /* Adapter 0 vector count. */ + _PVOID adap_vector; /* Adapter 0 vector ptr. */ + ULONG adap_typ1; /* Second adapter type. */ + ULONG adap_vcnt1; /* Adapter 1 vector count. */ + _PVOID adap_vector1; /* Adapter 1 vector ptr. */ + /* More adapter vectors go here... */ +} SYSTEM_PARAMETER_BLOCK, *PSYSTEM_PARAMETER_BLOCK; + +#define PROMBLOCK ((PSYSTEM_PARAMETER_BLOCK) (int)0xA0001000) +#define ROMVECTOR ((struct linux_romvec *) (long)(PROMBLOCK)->romvec) + +/* Cache layout parameter block. */ +union linux_cache_key { + struct param { +#ifdef __MIPSEL__ + unsigned short size; + unsigned char lsize; + unsigned char bsize; +#else /* !(__MIPSEL__) */ + unsigned char bsize; + unsigned char lsize; + unsigned short size; +#endif + } info; + unsigned long allinfo; +}; + +/* Configuration data. */ +struct linux_cdata { + char *name; + int mlen; + enum linux_devtypes type; +}; + +/* Common SGI ARCS firmware file descriptors. */ +#define SGIPROM_STDIN 0 +#define SGIPROM_STDOUT 1 + +/* Common SGI ARCS firmware file types. */ +#define SGIPROM_ROFILE 0x01 /* read-only file */ +#define SGIPROM_HFILE 0x02 /* hidden file */ +#define SGIPROM_SFILE 0x04 /* System file */ +#define SGIPROM_AFILE 0x08 /* Archive file */ +#define SGIPROM_DFILE 0x10 /* Directory file */ +#define SGIPROM_DELFILE 0x20 /* Deleted file */ + +/* SGI ARCS boot record information. */ +struct sgi_partition { + unsigned char flag; +#define SGIPART_UNUSED 0x00 +#define SGIPART_ACTIVE 0x80 + + unsigned char shead, ssect, scyl; /* unused */ + unsigned char systype; /* OS type, Irix or NT */ + unsigned char ehead, esect, ecyl; /* unused */ + unsigned char rsect0, rsect1, rsect2, rsect3; + unsigned char tsect0, tsect1, tsect2, tsect3; +}; + +#define SGIBBLOCK_MAGIC 0xaa55 +#define SGIBBLOCK_MAXPART 0x0004 + +struct sgi_bootblock { + unsigned char _unused[446]; + struct sgi_partition partitions[SGIBBLOCK_MAXPART]; + unsigned short magic; +}; + +/* BIOS parameter block. */ +struct sgi_bparm_block { + unsigned short bytes_sect; /* bytes per sector */ + unsigned char sect_clust; /* sectors per cluster */ + unsigned short sect_resv; /* reserved sectors */ + unsigned char nfats; /* # of allocation tables */ + unsigned short nroot_dirents; /* # of root directory entries */ + unsigned short sect_volume; /* sectors in volume */ + unsigned char media_type; /* media descriptor */ + unsigned short sect_fat; /* sectors per allocation table */ + unsigned short sect_track; /* sectors per track */ + unsigned short nheads; /* # of heads */ + unsigned short nhsects; /* # of hidden sectors */ +}; + +struct sgi_bsector { + unsigned char jmpinfo[3]; + unsigned char manuf_name[8]; + struct sgi_bparm_block info; +}; + +/* Debugging block used with SGI symmon symbolic debugger. */ +#define SMB_DEBUG_MAGIC 0xfeeddead +struct linux_smonblock { + unsigned long magic; + void (*handler)(void); /* Breakpoint routine. */ + unsigned long dtable_base; /* Base addr of dbg table. */ + int (*printf)(const char *fmt, ...); + unsigned long btable_base; /* Breakpoint table. */ + unsigned long mpflushreqs; /* SMP cache flush request list. */ + unsigned long ntab; /* Name table. */ + unsigned long stab; /* Symbol table. */ + int smax; /* Max # of symbols. */ +}; + +/* + * Macros for calling a 32-bit ARC implementation from 64-bit code + */ + +#if defined(CONFIG_64BIT) && defined(CONFIG_ARC32) + +#define __arc_clobbers \ + "$2", "$3" /* ... */, "$8", "$9", "$10", "$11", \ + "$12", "$13", "$14", "$15", "$16", "$24", "$25", "$31" + +#define ARC_CALL0(dest) \ +({ long __res; \ + long __vec = (long) romvec->dest; \ + __asm__ __volatile__( \ + "dsubu\t$29, 32\n\t" \ + "jalr\t%1\n\t" \ + "daddu\t$29, 32\n\t" \ + "move\t%0, $2" \ + : "=r" (__res), "=r" (__vec) \ + : "1" (__vec) \ + : __arc_clobbers, "$4", "$5", "$6", "$7"); \ + (unsigned long) __res; \ +}) + +#define ARC_CALL1(dest, a1) \ +({ long __res; \ + register signed int __a1 __asm__("$4") = (int) (long) (a1); \ + long __vec = (long) romvec->dest; \ + __asm__ __volatile__( \ + "dsubu\t$29, 32\n\t" \ + "jalr\t%1\n\t" \ + "daddu\t$29, 32\n\t" \ + "move\t%0, $2" \ + : "=r" (__res), "=r" (__vec) \ + : "1" (__vec), "r" (__a1) \ + : __arc_clobbers, "$5", "$6", "$7"); \ + (unsigned long) __res; \ +}) + +#define ARC_CALL2(dest, a1, a2) \ +({ long __res; \ + register signed int __a1 __asm__("$4") = (int) (long) (a1); \ + register signed int __a2 __asm__("$5") = (int) (long) (a2); \ + long __vec = (long) romvec->dest; \ + __asm__ __volatile__( \ + "dsubu\t$29, 32\n\t" \ + "jalr\t%1\n\t" \ + "daddu\t$29, 32\n\t" \ + "move\t%0, $2" \ + : "=r" (__res), "=r" (__vec) \ + : "1" (__vec), "r" (__a1), "r" (__a2) \ + : __arc_clobbers, "$6", "$7"); \ + __res; \ +}) + +#define ARC_CALL3(dest, a1, a2, a3) \ +({ long __res; \ + register signed int __a1 __asm__("$4") = (int) (long) (a1); \ + register signed int __a2 __asm__("$5") = (int) (long) (a2); \ + register signed int __a3 __asm__("$6") = (int) (long) (a3); \ + long __vec = (long) romvec->dest; \ + __asm__ __volatile__( \ + "dsubu\t$29, 32\n\t" \ + "jalr\t%1\n\t" \ + "daddu\t$29, 32\n\t" \ + "move\t%0, $2" \ + : "=r" (__res), "=r" (__vec) \ + : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3) \ + : __arc_clobbers, "$7"); \ + __res; \ +}) + +#define ARC_CALL4(dest, a1, a2, a3, a4) \ +({ long __res; \ + register signed int __a1 __asm__("$4") = (int) (long) (a1); \ + register signed int __a2 __asm__("$5") = (int) (long) (a2); \ + register signed int __a3 __asm__("$6") = (int) (long) (a3); \ + register signed int __a4 __asm__("$7") = (int) (long) (a4); \ + long __vec = (long) romvec->dest; \ + __asm__ __volatile__( \ + "dsubu\t$29, 32\n\t" \ + "jalr\t%1\n\t" \ + "daddu\t$29, 32\n\t" \ + "move\t%0, $2" \ + : "=r" (__res), "=r" (__vec) \ + : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3), \ + "r" (__a4) \ + : __arc_clobbers); \ + __res; \ +}) + +#define ARC_CALL5(dest, a1, a2, a3, a4, a5) \ +({ long __res; \ + register signed int __a1 __asm__("$4") = (int) (long) (a1); \ + register signed int __a2 __asm__("$5") = (int) (long) (a2); \ + register signed int __a3 __asm__("$6") = (int) (long) (a3); \ + register signed int __a4 __asm__("$7") = (int) (long) (a4); \ + register signed int __a5 = (int) (long) (a5); \ + long __vec = (long) romvec->dest; \ + __asm__ __volatile__( \ + "dsubu\t$29, 32\n\t" \ + "sw\t%7, 16($29)\n\t" \ + "jalr\t%1\n\t" \ + "daddu\t$29, 32\n\t" \ + "move\t%0, $2" \ + : "=r" (__res), "=r" (__vec) \ + : "1" (__vec), \ + "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4), \ + "r" (__a5) \ + : __arc_clobbers); \ + __res; \ +}) + +#endif /* defined(CONFIG_64BIT) && defined(CONFIG_ARC32) */ + +#if (defined(CONFIG_32BIT) && defined(CONFIG_ARC32)) || \ + (defined(CONFIG_64BIT) && defined(CONFIG_ARC64)) + +#define ARC_CALL0(dest) \ +({ long __res; \ + long (*__vec)(void) = (void *) romvec->dest; \ + \ + __res = __vec(); \ + __res; \ +}) + +#define ARC_CALL1(dest, a1) \ +({ long __res; \ + long __a1 = (long) (a1); \ + long (*__vec)(long) = (void *) romvec->dest; \ + \ + __res = __vec(__a1); \ + __res; \ +}) + +#define ARC_CALL2(dest, a1, a2) \ +({ long __res; \ + long __a1 = (long) (a1); \ + long __a2 = (long) (a2); \ + long (*__vec)(long, long) = (void *) romvec->dest; \ + \ + __res = __vec(__a1, __a2); \ + __res; \ +}) + +#define ARC_CALL3(dest, a1, a2, a3) \ +({ long __res; \ + long __a1 = (long) (a1); \ + long __a2 = (long) (a2); \ + long __a3 = (long) (a3); \ + long (*__vec)(long, long, long) = (void *) romvec->dest; \ + \ + __res = __vec(__a1, __a2, __a3); \ + __res; \ +}) + +#define ARC_CALL4(dest, a1, a2, a3, a4) \ +({ long __res; \ + long __a1 = (long) (a1); \ + long __a2 = (long) (a2); \ + long __a3 = (long) (a3); \ + long __a4 = (long) (a4); \ + long (*__vec)(long, long, long, long) = (void *) romvec->dest; \ + \ + __res = __vec(__a1, __a2, __a3, __a4); \ + __res; \ +}) + +#define ARC_CALL5(dest, a1, a2, a3, a4, a5) \ +({ long __res; \ + long __a1 = (long) (a1); \ + long __a2 = (long) (a2); \ + long __a3 = (long) (a3); \ + long __a4 = (long) (a4); \ + long __a5 = (long) (a5); \ + long (*__vec)(long, long, long, long, long); \ + __vec = (void *) romvec->dest; \ + \ + __res = __vec(__a1, __a2, __a3, __a4, __a5); \ + __res; \ +}) +#endif /* both kernel and ARC either 32-bit or 64-bit */ + +#endif /* _ASM_SGIARCS_H */ diff --git a/arch/mips/include/asm/sgidefs.h b/arch/mips/include/asm/sgidefs.h new file mode 100644 index 000000000000..876442fcfb32 --- /dev/null +++ b/arch/mips/include/asm/sgidefs.h @@ -0,0 +1,44 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1999, 2001 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#ifndef __ASM_SGIDEFS_H +#define __ASM_SGIDEFS_H + +/* + * Using a Linux compiler for building Linux seems logic but not to + * everybody. + */ +#ifndef __linux__ +#error Use a Linux compiler or give up. +#endif + +/* + * Definitions for the ISA levels + * + * With the introduction of MIPS32 / MIPS64 instruction sets definitions + * MIPS ISAs are no longer subsets of each other. Therefore comparisons + * on these symbols except with == may result in unexpected results and + * are forbidden! + */ +#define _MIPS_ISA_MIPS1 1 +#define _MIPS_ISA_MIPS2 2 +#define _MIPS_ISA_MIPS3 3 +#define _MIPS_ISA_MIPS4 4 +#define _MIPS_ISA_MIPS5 5 +#define _MIPS_ISA_MIPS32 6 +#define _MIPS_ISA_MIPS64 7 + +/* + * Subprogram calling convention + */ +#define _MIPS_SIM_ABI32 1 +#define _MIPS_SIM_NABI32 2 +#define _MIPS_SIM_ABI64 3 + +#endif /* __ASM_SGIDEFS_H */ diff --git a/arch/mips/include/asm/shmbuf.h b/arch/mips/include/asm/shmbuf.h new file mode 100644 index 000000000000..f994438277bf --- /dev/null +++ b/arch/mips/include/asm/shmbuf.h @@ -0,0 +1,38 @@ +#ifndef _ASM_SHMBUF_H +#define _ASM_SHMBUF_H + +/* + * The shmid64_ds structure for the MIPS architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 2 miscellaneous 32-bit rsp. 64-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + __kernel_time_t shm_dtime; /* last detach time */ + __kernel_time_t shm_ctime; /* last change time */ + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused1; + unsigned long __unused2; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_SHMBUF_H */ diff --git a/arch/mips/include/asm/shmparam.h b/arch/mips/include/asm/shmparam.h new file mode 100644 index 000000000000..09290720751c --- /dev/null +++ b/arch/mips/include/asm/shmparam.h @@ -0,0 +1,13 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef _ASM_SHMPARAM_H +#define _ASM_SHMPARAM_H + +#define __ARCH_FORCE_SHMLBA 1 + +#define SHMLBA 0x40000 /* attach addr a multiple of this */ + +#endif /* _ASM_SHMPARAM_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_int.h b/arch/mips/include/asm/sibyte/bcm1480_int.h new file mode 100644 index 000000000000..6109557c14e9 --- /dev/null +++ b/arch/mips/include/asm/sibyte/bcm1480_int.h @@ -0,0 +1,312 @@ +/* ********************************************************************* + * BCM1280/BCM1480 Board Support Package + * + * Interrupt Mapper definitions File: bcm1480_int.h + * + * This module contains constants for manipulating the + * BCM1255/BCM1280/BCM1455/BCM1480's interrupt mapper and + * definitions for the interrupt sources. + * + * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03) + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _BCM1480_INT_H +#define _BCM1480_INT_H + +#include "sb1250_defs.h" + +/* ********************************************************************* + * Interrupt Mapper Constants + ********************************************************************* */ + +/* + * The interrupt mapper deals with 128-bit logical registers that are + * implemented as pairs of 64-bit registers, with the "low" 64 bits in + * a register that has an address 0x1000 higher(!) than the + * corresponding "high" register. + * + * For appropriate registers, bit 0 of the "high" register is a + * cascade bit that summarizes (as a bit-OR) the 64 bits of the "low" + * register. + */ + +/* + * This entire file uses _BCM1480_ in all the symbols because it is + * entirely BCM1480 specific. + */ + +/* + * Interrupt sources (Table 22) + */ + +#define K_BCM1480_INT_SOURCES 128 + +#define _BCM1480_INT_HIGH(k) (k) +#define _BCM1480_INT_LOW(k) ((k)+64) + +#define K_BCM1480_INT_ADDR_TRAP _BCM1480_INT_HIGH(1) +#define K_BCM1480_INT_GPIO_0 _BCM1480_INT_HIGH(4) +#define K_BCM1480_INT_GPIO_1 _BCM1480_INT_HIGH(5) +#define K_BCM1480_INT_GPIO_2 _BCM1480_INT_HIGH(6) +#define K_BCM1480_INT_GPIO_3 _BCM1480_INT_HIGH(7) +#define K_BCM1480_INT_PCI_INTA _BCM1480_INT_HIGH(8) +#define K_BCM1480_INT_PCI_INTB _BCM1480_INT_HIGH(9) +#define K_BCM1480_INT_PCI_INTC _BCM1480_INT_HIGH(10) +#define K_BCM1480_INT_PCI_INTD _BCM1480_INT_HIGH(11) +#define K_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_HIGH(12) +#define K_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_HIGH(13) +#define K_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_HIGH(14) +#define K_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_HIGH(15) +#define K_BCM1480_INT_TIMER_0 _BCM1480_INT_HIGH(20) +#define K_BCM1480_INT_TIMER_1 _BCM1480_INT_HIGH(21) +#define K_BCM1480_INT_TIMER_2 _BCM1480_INT_HIGH(22) +#define K_BCM1480_INT_TIMER_3 _BCM1480_INT_HIGH(23) +#define K_BCM1480_INT_DM_CH_0 _BCM1480_INT_HIGH(28) +#define K_BCM1480_INT_DM_CH_1 _BCM1480_INT_HIGH(29) +#define K_BCM1480_INT_DM_CH_2 _BCM1480_INT_HIGH(30) +#define K_BCM1480_INT_DM_CH_3 _BCM1480_INT_HIGH(31) +#define K_BCM1480_INT_MAC_0 _BCM1480_INT_HIGH(36) +#define K_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_HIGH(37) +#define K_BCM1480_INT_MAC_1 _BCM1480_INT_HIGH(38) +#define K_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_HIGH(39) +#define K_BCM1480_INT_MAC_2 _BCM1480_INT_HIGH(40) +#define K_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_HIGH(41) +#define K_BCM1480_INT_MAC_3 _BCM1480_INT_HIGH(42) +#define K_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_HIGH(43) +#define K_BCM1480_INT_PMI_LOW _BCM1480_INT_HIGH(52) +#define K_BCM1480_INT_PMI_HIGH _BCM1480_INT_HIGH(53) +#define K_BCM1480_INT_PMO_LOW _BCM1480_INT_HIGH(54) +#define K_BCM1480_INT_PMO_HIGH _BCM1480_INT_HIGH(55) +#define K_BCM1480_INT_MBOX_0_0 _BCM1480_INT_HIGH(56) +#define K_BCM1480_INT_MBOX_0_1 _BCM1480_INT_HIGH(57) +#define K_BCM1480_INT_MBOX_0_2 _BCM1480_INT_HIGH(58) +#define K_BCM1480_INT_MBOX_0_3 _BCM1480_INT_HIGH(59) +#define K_BCM1480_INT_MBOX_1_0 _BCM1480_INT_HIGH(60) +#define K_BCM1480_INT_MBOX_1_1 _BCM1480_INT_HIGH(61) +#define K_BCM1480_INT_MBOX_1_2 _BCM1480_INT_HIGH(62) +#define K_BCM1480_INT_MBOX_1_3 _BCM1480_INT_HIGH(63) + +#define K_BCM1480_INT_BAD_ECC _BCM1480_INT_LOW(1) +#define K_BCM1480_INT_COR_ECC _BCM1480_INT_LOW(2) +#define K_BCM1480_INT_IO_BUS _BCM1480_INT_LOW(3) +#define K_BCM1480_INT_PERF_CNT _BCM1480_INT_LOW(4) +#define K_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_LOW(5) +#define K_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_LOW(6) +#define K_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_LOW(7) +#define K_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_LOW(8) +#define K_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_LOW(9) +#define K_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_LOW(10) +#define K_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_LOW(11) +#define K_BCM1480_INT_PCI_ERROR _BCM1480_INT_LOW(16) +#define K_BCM1480_INT_PCI_RESET _BCM1480_INT_LOW(17) +#define K_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_LOW(18) +#define K_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_LOW(19) +#define K_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_LOW(20) +#define K_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_LOW(21) +#define K_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_LOW(22) +#define K_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_LOW(23) +#define K_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_LOW(24) +#define K_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_LOW(25) +#define K_BCM1480_INT_LDT_SMI _BCM1480_INT_LOW(32) +#define K_BCM1480_INT_LDT_NMI _BCM1480_INT_LOW(33) +#define K_BCM1480_INT_LDT_INIT _BCM1480_INT_LOW(34) +#define K_BCM1480_INT_LDT_STARTUP _BCM1480_INT_LOW(35) +#define K_BCM1480_INT_LDT_EXT _BCM1480_INT_LOW(36) +#define K_BCM1480_INT_SMB_0 _BCM1480_INT_LOW(40) +#define K_BCM1480_INT_SMB_1 _BCM1480_INT_LOW(41) +#define K_BCM1480_INT_PCMCIA _BCM1480_INT_LOW(42) +#define K_BCM1480_INT_UART_0 _BCM1480_INT_LOW(44) +#define K_BCM1480_INT_UART_1 _BCM1480_INT_LOW(45) +#define K_BCM1480_INT_UART_2 _BCM1480_INT_LOW(46) +#define K_BCM1480_INT_UART_3 _BCM1480_INT_LOW(47) +#define K_BCM1480_INT_GPIO_4 _BCM1480_INT_LOW(52) +#define K_BCM1480_INT_GPIO_5 _BCM1480_INT_LOW(53) +#define K_BCM1480_INT_GPIO_6 _BCM1480_INT_LOW(54) +#define K_BCM1480_INT_GPIO_7 _BCM1480_INT_LOW(55) +#define K_BCM1480_INT_GPIO_8 _BCM1480_INT_LOW(56) +#define K_BCM1480_INT_GPIO_9 _BCM1480_INT_LOW(57) +#define K_BCM1480_INT_GPIO_10 _BCM1480_INT_LOW(58) +#define K_BCM1480_INT_GPIO_11 _BCM1480_INT_LOW(59) +#define K_BCM1480_INT_GPIO_12 _BCM1480_INT_LOW(60) +#define K_BCM1480_INT_GPIO_13 _BCM1480_INT_LOW(61) +#define K_BCM1480_INT_GPIO_14 _BCM1480_INT_LOW(62) +#define K_BCM1480_INT_GPIO_15 _BCM1480_INT_LOW(63) + +/* + * Mask values for each interrupt + */ + +#define _BCM1480_INT_MASK(w, n) _SB_MAKEMASK(w, ((n) & 0x3F)) +#define _BCM1480_INT_MASK1(n) _SB_MAKEMASK1(((n) & 0x3F)) +#define _BCM1480_INT_OFFSET(n) (((n) & 0x40) << 6) + +#define M_BCM1480_INT_CASCADE _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0)) + +#define M_BCM1480_INT_ADDR_TRAP _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP) +#define M_BCM1480_INT_GPIO_0 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0) +#define M_BCM1480_INT_GPIO_1 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1) +#define M_BCM1480_INT_GPIO_2 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2) +#define M_BCM1480_INT_GPIO_3 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3) +#define M_BCM1480_INT_PCI_INTA _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA) +#define M_BCM1480_INT_PCI_INTB _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB) +#define M_BCM1480_INT_PCI_INTC _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC) +#define M_BCM1480_INT_PCI_INTD _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD) +#define M_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0) +#define M_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1) +#define M_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2) +#define M_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3) +#define M_BCM1480_INT_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0) +#define M_BCM1480_INT_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1) +#define M_BCM1480_INT_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2) +#define M_BCM1480_INT_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3) +#define M_BCM1480_INT_DM_CH_0 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0) +#define M_BCM1480_INT_DM_CH_1 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1) +#define M_BCM1480_INT_DM_CH_2 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2) +#define M_BCM1480_INT_DM_CH_3 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3) +#define M_BCM1480_INT_MAC_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0) +#define M_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1) +#define M_BCM1480_INT_MAC_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1) +#define M_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1) +#define M_BCM1480_INT_MAC_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2) +#define M_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1) +#define M_BCM1480_INT_MAC_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3) +#define M_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1) +#define M_BCM1480_INT_PMI_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW) +#define M_BCM1480_INT_PMI_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH) +#define M_BCM1480_INT_PMO_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW) +#define M_BCM1480_INT_PMO_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH) +#define M_BCM1480_INT_MBOX_ALL _BCM1480_INT_MASK(8, K_BCM1480_INT_MBOX_0_0) +#define M_BCM1480_INT_MBOX_0_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0) +#define M_BCM1480_INT_MBOX_0_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1) +#define M_BCM1480_INT_MBOX_0_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2) +#define M_BCM1480_INT_MBOX_0_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3) +#define M_BCM1480_INT_MBOX_1_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0) +#define M_BCM1480_INT_MBOX_1_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1) +#define M_BCM1480_INT_MBOX_1_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2) +#define M_BCM1480_INT_MBOX_1_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3) +#define M_BCM1480_INT_BAD_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC) +#define M_BCM1480_INT_COR_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC) +#define M_BCM1480_INT_IO_BUS _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS) +#define M_BCM1480_INT_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT) +#define M_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT) +#define M_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE) +#define M_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE) +#define M_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0) +#define M_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1) +#define M_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2) +#define M_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3) +#define M_BCM1480_INT_PCI_ERROR _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR) +#define M_BCM1480_INT_PCI_RESET _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET) +#define M_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER) +#define M_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE) +#define M_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL) +#define M_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL) +#define M_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL) +#define M_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL) +#define M_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL) +#define M_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL) +#define M_BCM1480_INT_LDT_SMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI) +#define M_BCM1480_INT_LDT_NMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI) +#define M_BCM1480_INT_LDT_INIT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT) +#define M_BCM1480_INT_LDT_STARTUP _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP) +#define M_BCM1480_INT_LDT_EXT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT) +#define M_BCM1480_INT_SMB_0 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0) +#define M_BCM1480_INT_SMB_1 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1) +#define M_BCM1480_INT_PCMCIA _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA) +#define M_BCM1480_INT_UART_0 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0) +#define M_BCM1480_INT_UART_1 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1) +#define M_BCM1480_INT_UART_2 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2) +#define M_BCM1480_INT_UART_3 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3) +#define M_BCM1480_INT_GPIO_4 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4) +#define M_BCM1480_INT_GPIO_5 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5) +#define M_BCM1480_INT_GPIO_6 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6) +#define M_BCM1480_INT_GPIO_7 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7) +#define M_BCM1480_INT_GPIO_8 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8) +#define M_BCM1480_INT_GPIO_9 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9) +#define M_BCM1480_INT_GPIO_10 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10) +#define M_BCM1480_INT_GPIO_11 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11) +#define M_BCM1480_INT_GPIO_12 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12) +#define M_BCM1480_INT_GPIO_13 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13) +#define M_BCM1480_INT_GPIO_14 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14) +#define M_BCM1480_INT_GPIO_15 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15) + +/* + * Interrupt mappings (Table 18) + */ + +#define K_BCM1480_INT_MAP_I0 0 /* interrupt pins on processor */ +#define K_BCM1480_INT_MAP_I1 1 +#define K_BCM1480_INT_MAP_I2 2 +#define K_BCM1480_INT_MAP_I3 3 +#define K_BCM1480_INT_MAP_I4 4 +#define K_BCM1480_INT_MAP_I5 5 +#define K_BCM1480_INT_MAP_NMI 6 /* nonmaskable */ +#define K_BCM1480_INT_MAP_DINT 7 /* debug interrupt */ + +/* + * Interrupt LDT Set Register (Table 19) + */ + +#define S_BCM1480_INT_HT_INTMSG 0 +#define M_BCM1480_INT_HT_INTMSG _SB_MAKEMASK(3, S_BCM1480_INT_HT_INTMSG) +#define V_BCM1480_INT_HT_INTMSG(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTMSG) +#define G_BCM1480_INT_HT_INTMSG(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_INTMSG, M_BCM1480_INT_HT_INTMSG) + +#define K_BCM1480_INT_HT_INTMSG_FIXED 0 +#define K_BCM1480_INT_HT_INTMSG_ARBITRATED 1 +#define K_BCM1480_INT_HT_INTMSG_SMI 2 +#define K_BCM1480_INT_HT_INTMSG_NMI 3 +#define K_BCM1480_INT_HT_INTMSG_INIT 4 +#define K_BCM1480_INT_HT_INTMSG_STARTUP 5 +#define K_BCM1480_INT_HT_INTMSG_EXTINT 6 +#define K_BCM1480_INT_HT_INTMSG_RESERVED 7 + +#define M_BCM1480_INT_HT_TRIGGERMODE _SB_MAKEMASK1(3) +#define V_BCM1480_INT_HT_EDGETRIGGER 0 +#define V_BCM1480_INT_HT_LEVELTRIGGER M_BCM1480_INT_HT_TRIGGERMODE + +#define M_BCM1480_INT_HT_DESTMODE _SB_MAKEMASK1(4) +#define V_BCM1480_INT_HT_PHYSICALDEST 0 +#define V_BCM1480_INT_HT_LOGICALDEST M_BCM1480_INT_HT_DESTMODE + +#define S_BCM1480_INT_HT_INTDEST 5 +#define M_BCM1480_INT_HT_INTDEST _SB_MAKEMASK(8, S_BCM1480_INT_HT_INTDEST) +#define V_BCM1480_INT_HT_INTDEST(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTDEST) +#define G_BCM1480_INT_HT_INTDEST(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_INTDEST, M_BCM1480_INT_HT_INTDEST) + +#define S_BCM1480_INT_HT_VECTOR 13 +#define M_BCM1480_INT_HT_VECTOR _SB_MAKEMASK(8, S_BCM1480_INT_HT_VECTOR) +#define V_BCM1480_INT_HT_VECTOR(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_VECTOR) +#define G_BCM1480_INT_HT_VECTOR(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_VECTOR, M_BCM1480_INT_HT_VECTOR) + +/* + * Vector prefix (Table 4-7) + */ + +#define M_BCM1480_HTVECT_RAISE_INTLDT_HIGH 0x00 +#define M_BCM1480_HTVECT_RAISE_MBOX_0 0x40 +#define M_BCM1480_HTVECT_RAISE_INTLDT_LO 0x80 +#define M_BCM1480_HTVECT_RAISE_MBOX_1 0xC0 + +#endif /* _BCM1480_INT_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_l2c.h b/arch/mips/include/asm/sibyte/bcm1480_l2c.h new file mode 100644 index 000000000000..fd75817f7ac4 --- /dev/null +++ b/arch/mips/include/asm/sibyte/bcm1480_l2c.h @@ -0,0 +1,176 @@ +/* ********************************************************************* + * BCM1280/BCM1480 Board Support Package + * + * L2 Cache constants and macros File: bcm1480_l2c.h + * + * This module contains constants useful for manipulating the + * level 2 cache. + * + * BCM1400 specification level: 1280-UM100-D2 (11/14/03) + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _BCM1480_L2C_H +#define _BCM1480_L2C_H + +#include "sb1250_defs.h" + +/* + * Format of level 2 cache management address (Table 55) + */ + +#define S_BCM1480_L2C_MGMT_INDEX 5 +#define M_BCM1480_L2C_MGMT_INDEX _SB_MAKEMASK(12, S_BCM1480_L2C_MGMT_INDEX) +#define V_BCM1480_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_INDEX) +#define G_BCM1480_L2C_MGMT_INDEX(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_INDEX, M_BCM1480_L2C_MGMT_INDEX) + +#define S_BCM1480_L2C_MGMT_WAY 17 +#define M_BCM1480_L2C_MGMT_WAY _SB_MAKEMASK(3, S_BCM1480_L2C_MGMT_WAY) +#define V_BCM1480_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_WAY) +#define G_BCM1480_L2C_MGMT_WAY(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_WAY, M_BCM1480_L2C_MGMT_WAY) + +#define M_BCM1480_L2C_MGMT_DIRTY _SB_MAKEMASK1(20) +#define M_BCM1480_L2C_MGMT_VALID _SB_MAKEMASK1(21) + +#define S_BCM1480_L2C_MGMT_ECC_DIAG 22 +#define M_BCM1480_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2, S_BCM1480_L2C_MGMT_ECC_DIAG) +#define V_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG) +#define G_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG, M_BCM1480_L2C_MGMT_ECC_DIAG) + +#define A_BCM1480_L2C_MGMT_TAG_BASE 0x00D0000000 + +#define BCM1480_L2C_ENTRIES_PER_WAY 4096 +#define BCM1480_L2C_NUM_WAYS 8 + + +/* + * Level 2 Cache Tag register (Table 59) + */ + +#define S_BCM1480_L2C_TAG_MBZ 0 +#define M_BCM1480_L2C_TAG_MBZ _SB_MAKEMASK(5, S_BCM1480_L2C_TAG_MBZ) + +#define S_BCM1480_L2C_TAG_INDEX 5 +#define M_BCM1480_L2C_TAG_INDEX _SB_MAKEMASK(12, S_BCM1480_L2C_TAG_INDEX) +#define V_BCM1480_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_INDEX) +#define G_BCM1480_L2C_TAG_INDEX(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_INDEX, M_BCM1480_L2C_TAG_INDEX) + +/* Note that index bit 16 is also tag bit 40 */ +#define S_BCM1480_L2C_TAG_TAG 17 +#define M_BCM1480_L2C_TAG_TAG _SB_MAKEMASK(23, S_BCM1480_L2C_TAG_TAG) +#define V_BCM1480_L2C_TAG_TAG(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_TAG) +#define G_BCM1480_L2C_TAG_TAG(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_TAG, M_BCM1480_L2C_TAG_TAG) + +#define S_BCM1480_L2C_TAG_ECC 40 +#define M_BCM1480_L2C_TAG_ECC _SB_MAKEMASK(6, S_BCM1480_L2C_TAG_ECC) +#define V_BCM1480_L2C_TAG_ECC(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_ECC) +#define G_BCM1480_L2C_TAG_ECC(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_ECC, M_BCM1480_L2C_TAG_ECC) + +#define S_BCM1480_L2C_TAG_WAY 46 +#define M_BCM1480_L2C_TAG_WAY _SB_MAKEMASK(3, S_BCM1480_L2C_TAG_WAY) +#define V_BCM1480_L2C_TAG_WAY(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_WAY) +#define G_BCM1480_L2C_TAG_WAY(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_WAY, M_BCM1480_L2C_TAG_WAY) + +#define M_BCM1480_L2C_TAG_DIRTY _SB_MAKEMASK1(49) +#define M_BCM1480_L2C_TAG_VALID _SB_MAKEMASK1(50) + +#define S_BCM1480_L2C_DATA_ECC 51 +#define M_BCM1480_L2C_DATA_ECC _SB_MAKEMASK(10, S_BCM1480_L2C_DATA_ECC) +#define V_BCM1480_L2C_DATA_ECC(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_DATA_ECC) +#define G_BCM1480_L2C_DATA_ECC(x) _SB_GETVALUE(x, S_BCM1480_L2C_DATA_ECC, M_BCM1480_L2C_DATA_ECC) + + +/* + * L2 Misc0 Value Register (Table 60) + */ + +#define S_BCM1480_L2C_MISC0_WAY_REMOTE 0 +#define M_BCM1480_L2C_MISC0_WAY_REMOTE _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_REMOTE) +#define G_BCM1480_L2C_MISC0_WAY_REMOTE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_REMOTE, M_BCM1480_L2C_MISC0_WAY_REMOTE) + +#define S_BCM1480_L2C_MISC0_WAY_LOCAL 8 +#define M_BCM1480_L2C_MISC0_WAY_LOCAL _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_LOCAL) +#define G_BCM1480_L2C_MISC0_WAY_LOCAL(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_LOCAL, M_BCM1480_L2C_MISC0_WAY_LOCAL) + +#define S_BCM1480_L2C_MISC0_WAY_ENABLE 16 +#define M_BCM1480_L2C_MISC0_WAY_ENABLE _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_ENABLE) +#define G_BCM1480_L2C_MISC0_WAY_ENABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_ENABLE, M_BCM1480_L2C_MISC0_WAY_ENABLE) + +#define S_BCM1480_L2C_MISC0_CACHE_DISABLE 24 +#define M_BCM1480_L2C_MISC0_CACHE_DISABLE _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_DISABLE) +#define G_BCM1480_L2C_MISC0_CACHE_DISABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_DISABLE, M_BCM1480_L2C_MISC0_CACHE_DISABLE) + +#define S_BCM1480_L2C_MISC0_CACHE_QUAD 26 +#define M_BCM1480_L2C_MISC0_CACHE_QUAD _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_QUAD) +#define G_BCM1480_L2C_MISC0_CACHE_QUAD(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_QUAD, M_BCM1480_L2C_MISC0_CACHE_QUAD) + +#define S_BCM1480_L2C_MISC0_MC_PRIORITY 30 +#define M_BCM1480_L2C_MISC0_MC_PRIORITY _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY) + +#define S_BCM1480_L2C_MISC0_ECC_CLEANUP 31 +#define M_BCM1480_L2C_MISC0_ECC_CLEANUP _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP) + + +/* + * L2 Misc1 Value Register (Table 60) + */ + +#define S_BCM1480_L2C_MISC1_WAY_AGENT_0 0 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_0 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_0) +#define G_BCM1480_L2C_MISC1_WAY_AGENT_0(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_0, M_BCM1480_L2C_MISC1_WAY_AGENT_0) + +#define S_BCM1480_L2C_MISC1_WAY_AGENT_1 8 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_1 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_1) +#define G_BCM1480_L2C_MISC1_WAY_AGENT_1(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_1, M_BCM1480_L2C_MISC1_WAY_AGENT_1) + +#define S_BCM1480_L2C_MISC1_WAY_AGENT_2 16 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_2 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_2) +#define G_BCM1480_L2C_MISC1_WAY_AGENT_2(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_2, M_BCM1480_L2C_MISC1_WAY_AGENT_2) + +#define S_BCM1480_L2C_MISC1_WAY_AGENT_3 24 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_3 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_3) +#define G_BCM1480_L2C_MISC1_WAY_AGENT_3(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_3, M_BCM1480_L2C_MISC1_WAY_AGENT_3) + +#define S_BCM1480_L2C_MISC1_WAY_AGENT_4 32 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_4 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_4) +#define G_BCM1480_L2C_MISC1_WAY_AGENT_4(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_4, M_BCM1480_L2C_MISC1_WAY_AGENT_4) + + +/* + * L2 Misc2 Value Register (Table 60) + */ + +#define S_BCM1480_L2C_MISC2_WAY_AGENT_8 0 +#define M_BCM1480_L2C_MISC2_WAY_AGENT_8 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_8) +#define G_BCM1480_L2C_MISC2_WAY_AGENT_8(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_8, M_BCM1480_L2C_MISC2_WAY_AGENT_8) + +#define S_BCM1480_L2C_MISC2_WAY_AGENT_9 8 +#define M_BCM1480_L2C_MISC2_WAY_AGENT_9 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_9) +#define G_BCM1480_L2C_MISC2_WAY_AGENT_9(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_9, M_BCM1480_L2C_MISC2_WAY_AGENT_9) + +#define S_BCM1480_L2C_MISC2_WAY_AGENT_A 16 +#define M_BCM1480_L2C_MISC2_WAY_AGENT_A _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_A) +#define G_BCM1480_L2C_MISC2_WAY_AGENT_A(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_A, M_BCM1480_L2C_MISC2_WAY_AGENT_A) + + +#endif /* _BCM1480_L2C_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_mc.h b/arch/mips/include/asm/sibyte/bcm1480_mc.h new file mode 100644 index 000000000000..f26a41a82b59 --- /dev/null +++ b/arch/mips/include/asm/sibyte/bcm1480_mc.h @@ -0,0 +1,984 @@ +/* ********************************************************************* + * BCM1280/BCM1480 Board Support Package + * + * Memory Controller constants File: bcm1480_mc.h + * + * This module contains constants and macros useful for + * programming the memory controller. + * + * BCM1400 specification level: 1280-UM100-D1 (11/14/03 Review Copy) + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _BCM1480_MC_H +#define _BCM1480_MC_H + +#include "sb1250_defs.h" + +/* + * Memory Channel Configuration Register (Table 81) + */ + +#define S_BCM1480_MC_INTLV0 0 +#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0) +#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0) +#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0) +#define V_BCM1480_MC_INTLV0_DEFAULT V_BCM1480_MC_INTLV0(0) + +#define S_BCM1480_MC_INTLV1 8 +#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1) +#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1) +#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1) +#define V_BCM1480_MC_INTLV1_DEFAULT V_BCM1480_MC_INTLV1(0) + +#define S_BCM1480_MC_INTLV2 16 +#define M_BCM1480_MC_INTLV2 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV2) +#define V_BCM1480_MC_INTLV2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV2) +#define G_BCM1480_MC_INTLV2(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV2, M_BCM1480_MC_INTLV2) +#define V_BCM1480_MC_INTLV2_DEFAULT V_BCM1480_MC_INTLV2(0) + +#define S_BCM1480_MC_CS_MODE 32 +#define M_BCM1480_MC_CS_MODE _SB_MAKEMASK(8, S_BCM1480_MC_CS_MODE) +#define V_BCM1480_MC_CS_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS_MODE) +#define G_BCM1480_MC_CS_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_CS_MODE, M_BCM1480_MC_CS_MODE) +#define V_BCM1480_MC_CS_MODE_DEFAULT V_BCM1480_MC_CS_MODE(0) + +#define V_BCM1480_MC_CONFIG_DEFAULT (V_BCM1480_MC_INTLV0_DEFAULT | \ + V_BCM1480_MC_INTLV1_DEFAULT | \ + V_BCM1480_MC_INTLV2_DEFAULT | \ + V_BCM1480_MC_CS_MODE_DEFAULT) + +#define K_BCM1480_MC_CS01_MODE 0x03 +#define K_BCM1480_MC_CS02_MODE 0x05 +#define K_BCM1480_MC_CS0123_MODE 0x0F +#define K_BCM1480_MC_CS0246_MODE 0x55 +#define K_BCM1480_MC_CS0145_MODE 0x33 +#define K_BCM1480_MC_CS0167_MODE 0xC3 +#define K_BCM1480_MC_CSFULL_MODE 0xFF + +/* + * Chip Select Start Address Register (Table 82) + */ + +#define S_BCM1480_MC_CS0_START 0 +#define M_BCM1480_MC_CS0_START _SB_MAKEMASK(12, S_BCM1480_MC_CS0_START) +#define V_BCM1480_MC_CS0_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_START) +#define G_BCM1480_MC_CS0_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0_START, M_BCM1480_MC_CS0_START) + +#define S_BCM1480_MC_CS1_START 16 +#define M_BCM1480_MC_CS1_START _SB_MAKEMASK(12, S_BCM1480_MC_CS1_START) +#define V_BCM1480_MC_CS1_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_START) +#define G_BCM1480_MC_CS1_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS1_START, M_BCM1480_MC_CS1_START) + +#define S_BCM1480_MC_CS2_START 32 +#define M_BCM1480_MC_CS2_START _SB_MAKEMASK(12, S_BCM1480_MC_CS2_START) +#define V_BCM1480_MC_CS2_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_START) +#define G_BCM1480_MC_CS2_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS2_START, M_BCM1480_MC_CS2_START) + +#define S_BCM1480_MC_CS3_START 48 +#define M_BCM1480_MC_CS3_START _SB_MAKEMASK(12, S_BCM1480_MC_CS3_START) +#define V_BCM1480_MC_CS3_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_START) +#define G_BCM1480_MC_CS3_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS3_START, M_BCM1480_MC_CS3_START) + +/* + * Chip Select End Address Register (Table 83) + */ + +#define S_BCM1480_MC_CS0_END 0 +#define M_BCM1480_MC_CS0_END _SB_MAKEMASK(12, S_BCM1480_MC_CS0_END) +#define V_BCM1480_MC_CS0_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_END) +#define G_BCM1480_MC_CS0_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0_END, M_BCM1480_MC_CS0_END) + +#define S_BCM1480_MC_CS1_END 16 +#define M_BCM1480_MC_CS1_END _SB_MAKEMASK(12, S_BCM1480_MC_CS1_END) +#define V_BCM1480_MC_CS1_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_END) +#define G_BCM1480_MC_CS1_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS1_END, M_BCM1480_MC_CS1_END) + +#define S_BCM1480_MC_CS2_END 32 +#define M_BCM1480_MC_CS2_END _SB_MAKEMASK(12, S_BCM1480_MC_CS2_END) +#define V_BCM1480_MC_CS2_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_END) +#define G_BCM1480_MC_CS2_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS2_END, M_BCM1480_MC_CS2_END) + +#define S_BCM1480_MC_CS3_END 48 +#define M_BCM1480_MC_CS3_END _SB_MAKEMASK(12, S_BCM1480_MC_CS3_END) +#define V_BCM1480_MC_CS3_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_END) +#define G_BCM1480_MC_CS3_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS3_END, M_BCM1480_MC_CS3_END) + +/* + * Row Address Bit Select Register 0 (Table 84) + */ + +#define S_BCM1480_MC_ROW00 0 +#define M_BCM1480_MC_ROW00 _SB_MAKEMASK(6, S_BCM1480_MC_ROW00) +#define V_BCM1480_MC_ROW00(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW00) +#define G_BCM1480_MC_ROW00(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW00, M_BCM1480_MC_ROW00) + +#define S_BCM1480_MC_ROW01 8 +#define M_BCM1480_MC_ROW01 _SB_MAKEMASK(6, S_BCM1480_MC_ROW01) +#define V_BCM1480_MC_ROW01(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW01) +#define G_BCM1480_MC_ROW01(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW01, M_BCM1480_MC_ROW01) + +#define S_BCM1480_MC_ROW02 16 +#define M_BCM1480_MC_ROW02 _SB_MAKEMASK(6, S_BCM1480_MC_ROW02) +#define V_BCM1480_MC_ROW02(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW02) +#define G_BCM1480_MC_ROW02(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW02, M_BCM1480_MC_ROW02) + +#define S_BCM1480_MC_ROW03 24 +#define M_BCM1480_MC_ROW03 _SB_MAKEMASK(6, S_BCM1480_MC_ROW03) +#define V_BCM1480_MC_ROW03(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW03) +#define G_BCM1480_MC_ROW03(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW03, M_BCM1480_MC_ROW03) + +#define S_BCM1480_MC_ROW04 32 +#define M_BCM1480_MC_ROW04 _SB_MAKEMASK(6, S_BCM1480_MC_ROW04) +#define V_BCM1480_MC_ROW04(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW04) +#define G_BCM1480_MC_ROW04(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW04, M_BCM1480_MC_ROW04) + +#define S_BCM1480_MC_ROW05 40 +#define M_BCM1480_MC_ROW05 _SB_MAKEMASK(6, S_BCM1480_MC_ROW05) +#define V_BCM1480_MC_ROW05(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW05) +#define G_BCM1480_MC_ROW05(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW05, M_BCM1480_MC_ROW05) + +#define S_BCM1480_MC_ROW06 48 +#define M_BCM1480_MC_ROW06 _SB_MAKEMASK(6, S_BCM1480_MC_ROW06) +#define V_BCM1480_MC_ROW06(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW06) +#define G_BCM1480_MC_ROW06(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW06, M_BCM1480_MC_ROW06) + +#define S_BCM1480_MC_ROW07 56 +#define M_BCM1480_MC_ROW07 _SB_MAKEMASK(6, S_BCM1480_MC_ROW07) +#define V_BCM1480_MC_ROW07(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW07) +#define G_BCM1480_MC_ROW07(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW07, M_BCM1480_MC_ROW07) + +/* + * Row Address Bit Select Register 1 (Table 85) + */ + +#define S_BCM1480_MC_ROW08 0 +#define M_BCM1480_MC_ROW08 _SB_MAKEMASK(6, S_BCM1480_MC_ROW08) +#define V_BCM1480_MC_ROW08(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW08) +#define G_BCM1480_MC_ROW08(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW08, M_BCM1480_MC_ROW08) + +#define S_BCM1480_MC_ROW09 8 +#define M_BCM1480_MC_ROW09 _SB_MAKEMASK(6, S_BCM1480_MC_ROW09) +#define V_BCM1480_MC_ROW09(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW09) +#define G_BCM1480_MC_ROW09(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW09, M_BCM1480_MC_ROW09) + +#define S_BCM1480_MC_ROW10 16 +#define M_BCM1480_MC_ROW10 _SB_MAKEMASK(6, S_BCM1480_MC_ROW10) +#define V_BCM1480_MC_ROW10(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW10) +#define G_BCM1480_MC_ROW10(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW10, M_BCM1480_MC_ROW10) + +#define S_BCM1480_MC_ROW11 24 +#define M_BCM1480_MC_ROW11 _SB_MAKEMASK(6, S_BCM1480_MC_ROW11) +#define V_BCM1480_MC_ROW11(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW11) +#define G_BCM1480_MC_ROW11(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW11, M_BCM1480_MC_ROW11) + +#define S_BCM1480_MC_ROW12 32 +#define M_BCM1480_MC_ROW12 _SB_MAKEMASK(6, S_BCM1480_MC_ROW12) +#define V_BCM1480_MC_ROW12(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW12) +#define G_BCM1480_MC_ROW12(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW12, M_BCM1480_MC_ROW12) + +#define S_BCM1480_MC_ROW13 40 +#define M_BCM1480_MC_ROW13 _SB_MAKEMASK(6, S_BCM1480_MC_ROW13) +#define V_BCM1480_MC_ROW13(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW13) +#define G_BCM1480_MC_ROW13(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW13, M_BCM1480_MC_ROW13) + +#define S_BCM1480_MC_ROW14 48 +#define M_BCM1480_MC_ROW14 _SB_MAKEMASK(6, S_BCM1480_MC_ROW14) +#define V_BCM1480_MC_ROW14(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW14) +#define G_BCM1480_MC_ROW14(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW14, M_BCM1480_MC_ROW14) + +#define K_BCM1480_MC_ROWX_BIT_SPACING 8 + +/* + * Column Address Bit Select Register 0 (Table 86) + */ + +#define S_BCM1480_MC_COL00 0 +#define M_BCM1480_MC_COL00 _SB_MAKEMASK(6, S_BCM1480_MC_COL00) +#define V_BCM1480_MC_COL00(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL00) +#define G_BCM1480_MC_COL00(x) _SB_GETVALUE(x, S_BCM1480_MC_COL00, M_BCM1480_MC_COL00) + +#define S_BCM1480_MC_COL01 8 +#define M_BCM1480_MC_COL01 _SB_MAKEMASK(6, S_BCM1480_MC_COL01) +#define V_BCM1480_MC_COL01(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL01) +#define G_BCM1480_MC_COL01(x) _SB_GETVALUE(x, S_BCM1480_MC_COL01, M_BCM1480_MC_COL01) + +#define S_BCM1480_MC_COL02 16 +#define M_BCM1480_MC_COL02 _SB_MAKEMASK(6, S_BCM1480_MC_COL02) +#define V_BCM1480_MC_COL02(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL02) +#define G_BCM1480_MC_COL02(x) _SB_GETVALUE(x, S_BCM1480_MC_COL02, M_BCM1480_MC_COL02) + +#define S_BCM1480_MC_COL03 24 +#define M_BCM1480_MC_COL03 _SB_MAKEMASK(6, S_BCM1480_MC_COL03) +#define V_BCM1480_MC_COL03(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL03) +#define G_BCM1480_MC_COL03(x) _SB_GETVALUE(x, S_BCM1480_MC_COL03, M_BCM1480_MC_COL03) + +#define S_BCM1480_MC_COL04 32 +#define M_BCM1480_MC_COL04 _SB_MAKEMASK(6, S_BCM1480_MC_COL04) +#define V_BCM1480_MC_COL04(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL04) +#define G_BCM1480_MC_COL04(x) _SB_GETVALUE(x, S_BCM1480_MC_COL04, M_BCM1480_MC_COL04) + +#define S_BCM1480_MC_COL05 40 +#define M_BCM1480_MC_COL05 _SB_MAKEMASK(6, S_BCM1480_MC_COL05) +#define V_BCM1480_MC_COL05(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL05) +#define G_BCM1480_MC_COL05(x) _SB_GETVALUE(x, S_BCM1480_MC_COL05, M_BCM1480_MC_COL05) + +#define S_BCM1480_MC_COL06 48 +#define M_BCM1480_MC_COL06 _SB_MAKEMASK(6, S_BCM1480_MC_COL06) +#define V_BCM1480_MC_COL06(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL06) +#define G_BCM1480_MC_COL06(x) _SB_GETVALUE(x, S_BCM1480_MC_COL06, M_BCM1480_MC_COL06) + +#define S_BCM1480_MC_COL07 56 +#define M_BCM1480_MC_COL07 _SB_MAKEMASK(6, S_BCM1480_MC_COL07) +#define V_BCM1480_MC_COL07(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL07) +#define G_BCM1480_MC_COL07(x) _SB_GETVALUE(x, S_BCM1480_MC_COL07, M_BCM1480_MC_COL07) + +/* + * Column Address Bit Select Register 1 (Table 87) + */ + +#define S_BCM1480_MC_COL08 0 +#define M_BCM1480_MC_COL08 _SB_MAKEMASK(6, S_BCM1480_MC_COL08) +#define V_BCM1480_MC_COL08(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL08) +#define G_BCM1480_MC_COL08(x) _SB_GETVALUE(x, S_BCM1480_MC_COL08, M_BCM1480_MC_COL08) + +#define S_BCM1480_MC_COL09 8 +#define M_BCM1480_MC_COL09 _SB_MAKEMASK(6, S_BCM1480_MC_COL09) +#define V_BCM1480_MC_COL09(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL09) +#define G_BCM1480_MC_COL09(x) _SB_GETVALUE(x, S_BCM1480_MC_COL09, M_BCM1480_MC_COL09) + +#define S_BCM1480_MC_COL10 16 /* not a valid position, must be prog as 0 */ + +#define S_BCM1480_MC_COL11 24 +#define M_BCM1480_MC_COL11 _SB_MAKEMASK(6, S_BCM1480_MC_COL11) +#define V_BCM1480_MC_COL11(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL11) +#define G_BCM1480_MC_COL11(x) _SB_GETVALUE(x, S_BCM1480_MC_COL11, M_BCM1480_MC_COL11) + +#define S_BCM1480_MC_COL12 32 +#define M_BCM1480_MC_COL12 _SB_MAKEMASK(6, S_BCM1480_MC_COL12) +#define V_BCM1480_MC_COL12(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL12) +#define G_BCM1480_MC_COL12(x) _SB_GETVALUE(x, S_BCM1480_MC_COL12, M_BCM1480_MC_COL12) + +#define S_BCM1480_MC_COL13 40 +#define M_BCM1480_MC_COL13 _SB_MAKEMASK(6, S_BCM1480_MC_COL13) +#define V_BCM1480_MC_COL13(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL13) +#define G_BCM1480_MC_COL13(x) _SB_GETVALUE(x, S_BCM1480_MC_COL13, M_BCM1480_MC_COL13) + +#define S_BCM1480_MC_COL14 48 +#define M_BCM1480_MC_COL14 _SB_MAKEMASK(6, S_BCM1480_MC_COL14) +#define V_BCM1480_MC_COL14(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL14) +#define G_BCM1480_MC_COL14(x) _SB_GETVALUE(x, S_BCM1480_MC_COL14, M_BCM1480_MC_COL14) + +#define K_BCM1480_MC_COLX_BIT_SPACING 8 + +/* + * CS0 and CS1 Bank Address Bit Select Register (Table 88) + */ + +#define S_BCM1480_MC_CS01_BANK0 0 +#define M_BCM1480_MC_CS01_BANK0 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK0) +#define V_BCM1480_MC_CS01_BANK0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK0) +#define G_BCM1480_MC_CS01_BANK0(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK0, M_BCM1480_MC_CS01_BANK0) + +#define S_BCM1480_MC_CS01_BANK1 8 +#define M_BCM1480_MC_CS01_BANK1 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK1) +#define V_BCM1480_MC_CS01_BANK1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK1) +#define G_BCM1480_MC_CS01_BANK1(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK1, M_BCM1480_MC_CS01_BANK1) + +#define S_BCM1480_MC_CS01_BANK2 16 +#define M_BCM1480_MC_CS01_BANK2 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK2) +#define V_BCM1480_MC_CS01_BANK2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK2) +#define G_BCM1480_MC_CS01_BANK2(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK2, M_BCM1480_MC_CS01_BANK2) + +/* + * CS2 and CS3 Bank Address Bit Select Register (Table 89) + */ + +#define S_BCM1480_MC_CS23_BANK0 0 +#define M_BCM1480_MC_CS23_BANK0 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK0) +#define V_BCM1480_MC_CS23_BANK0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK0) +#define G_BCM1480_MC_CS23_BANK0(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK0, M_BCM1480_MC_CS23_BANK0) + +#define S_BCM1480_MC_CS23_BANK1 8 +#define M_BCM1480_MC_CS23_BANK1 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK1) +#define V_BCM1480_MC_CS23_BANK1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK1) +#define G_BCM1480_MC_CS23_BANK1(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK1, M_BCM1480_MC_CS23_BANK1) + +#define S_BCM1480_MC_CS23_BANK2 16 +#define M_BCM1480_MC_CS23_BANK2 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK2) +#define V_BCM1480_MC_CS23_BANK2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK2) +#define G_BCM1480_MC_CS23_BANK2(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK2, M_BCM1480_MC_CS23_BANK2) + +#define K_BCM1480_MC_CSXX_BANKX_BIT_SPACING 8 + +/* + * DRAM Command Register (Table 90) + */ + +#define S_BCM1480_MC_COMMAND 0 +#define M_BCM1480_MC_COMMAND _SB_MAKEMASK(4, S_BCM1480_MC_COMMAND) +#define V_BCM1480_MC_COMMAND(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COMMAND) +#define G_BCM1480_MC_COMMAND(x) _SB_GETVALUE(x, S_BCM1480_MC_COMMAND, M_BCM1480_MC_COMMAND) + +#define K_BCM1480_MC_COMMAND_EMRS 0 +#define K_BCM1480_MC_COMMAND_MRS 1 +#define K_BCM1480_MC_COMMAND_PRE 2 +#define K_BCM1480_MC_COMMAND_AR 3 +#define K_BCM1480_MC_COMMAND_SETRFSH 4 +#define K_BCM1480_MC_COMMAND_CLRRFSH 5 +#define K_BCM1480_MC_COMMAND_SETPWRDN 6 +#define K_BCM1480_MC_COMMAND_CLRPWRDN 7 + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define K_BCM1480_MC_COMMAND_EMRS2 8 +#define K_BCM1480_MC_COMMAND_EMRS3 9 +#define K_BCM1480_MC_COMMAND_ENABLE_MCLK 10 +#define K_BCM1480_MC_COMMAND_DISABLE_MCLK 11 +#endif + +#define V_BCM1480_MC_COMMAND_EMRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS) +#define V_BCM1480_MC_COMMAND_MRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS) +#define V_BCM1480_MC_COMMAND_PRE V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE) +#define V_BCM1480_MC_COMMAND_AR V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR) +#define V_BCM1480_MC_COMMAND_SETRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH) +#define V_BCM1480_MC_COMMAND_CLRRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH) +#define V_BCM1480_MC_COMMAND_SETPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN) +#define V_BCM1480_MC_COMMAND_CLRPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define V_BCM1480_MC_COMMAND_EMRS2 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2) +#define V_BCM1480_MC_COMMAND_EMRS3 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3) +#define V_BCM1480_MC_COMMAND_ENABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_ENABLE_MCLK) +#define V_BCM1480_MC_COMMAND_DISABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_DISABLE_MCLK) +#endif + +#define S_BCM1480_MC_CS0 4 +#define M_BCM1480_MC_CS0 _SB_MAKEMASK1(4) +#define M_BCM1480_MC_CS1 _SB_MAKEMASK1(5) +#define M_BCM1480_MC_CS2 _SB_MAKEMASK1(6) +#define M_BCM1480_MC_CS3 _SB_MAKEMASK1(7) +#define M_BCM1480_MC_CS4 _SB_MAKEMASK1(8) +#define M_BCM1480_MC_CS5 _SB_MAKEMASK1(9) +#define M_BCM1480_MC_CS6 _SB_MAKEMASK1(10) +#define M_BCM1480_MC_CS7 _SB_MAKEMASK1(11) + +#define M_BCM1480_MC_CS _SB_MAKEMASK(8, S_BCM1480_MC_CS0) +#define V_BCM1480_MC_CS(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0) +#define G_BCM1480_MC_CS(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0, M_BCM1480_MC_CS0) + +#define M_BCM1480_MC_CMD_ACTIVE _SB_MAKEMASK1(16) + +/* + * DRAM Mode Register (Table 91) + */ + +#define S_BCM1480_MC_EMODE 0 +#define M_BCM1480_MC_EMODE _SB_MAKEMASK(15, S_BCM1480_MC_EMODE) +#define V_BCM1480_MC_EMODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_EMODE) +#define G_BCM1480_MC_EMODE(x) _SB_GETVALUE(x, S_BCM1480_MC_EMODE, M_BCM1480_MC_EMODE) +#define V_BCM1480_MC_EMODE_DEFAULT V_BCM1480_MC_EMODE(0) + +#define S_BCM1480_MC_MODE 16 +#define M_BCM1480_MC_MODE _SB_MAKEMASK(15, S_BCM1480_MC_MODE) +#define V_BCM1480_MC_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_MODE) +#define G_BCM1480_MC_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_MODE, M_BCM1480_MC_MODE) +#define V_BCM1480_MC_MODE_DEFAULT V_BCM1480_MC_MODE(0) + +#define S_BCM1480_MC_DRAM_TYPE 32 +#define M_BCM1480_MC_DRAM_TYPE _SB_MAKEMASK(4, S_BCM1480_MC_DRAM_TYPE) +#define V_BCM1480_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DRAM_TYPE) +#define G_BCM1480_MC_DRAM_TYPE(x) _SB_GETVALUE(x, S_BCM1480_MC_DRAM_TYPE, M_BCM1480_MC_DRAM_TYPE) + +#define K_BCM1480_MC_DRAM_TYPE_JEDEC 0 +#define K_BCM1480_MC_DRAM_TYPE_FCRAM 1 + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define K_BCM1480_MC_DRAM_TYPE_DDR2 2 +#endif + +#define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1 0 + +#define V_BCM1480_MC_DRAM_TYPE_JEDEC V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC) +#define V_BCM1480_MC_DRAM_TYPE_FCRAM V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define V_BCM1480_MC_DRAM_TYPE_DDR2 V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_DDR2) +#endif + +#define M_BCM1480_MC_GANGED _SB_MAKEMASK1(36) +#define M_BCM1480_MC_BY9_INTF _SB_MAKEMASK1(37) +#define M_BCM1480_MC_FORCE_ECC64 _SB_MAKEMASK1(38) +#define M_BCM1480_MC_ECC_DISABLE _SB_MAKEMASK1(39) + +#define S_BCM1480_MC_PG_POLICY 40 +#define M_BCM1480_MC_PG_POLICY _SB_MAKEMASK(2, S_BCM1480_MC_PG_POLICY) +#define V_BCM1480_MC_PG_POLICY(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PG_POLICY) +#define G_BCM1480_MC_PG_POLICY(x) _SB_GETVALUE(x, S_BCM1480_MC_PG_POLICY, M_BCM1480_MC_PG_POLICY) + +#define K_BCM1480_MC_PG_POLICY_CLOSED 0 +#define K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK 1 + +#define V_BCM1480_MC_PG_POLICY_CLOSED V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED) +#define V_BCM1480_MC_PG_POLICY_CAS_TIME_CHK V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define M_BCM1480_MC_2T_CMD _SB_MAKEMASK1(42) +#define M_BCM1480_MC_ECC_COR_DIS _SB_MAKEMASK1(43) +#endif + +#define V_BCM1480_MC_DRAMMODE_DEFAULT V_BCM1480_MC_EMODE_DEFAULT | V_BCM1480_MC_MODE_DEFAULT | V_BCM1480_MC_DRAM_TYPE_JEDEC | \ + V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK) + +/* + * Memory Clock Configuration Register (Table 92) + */ + +#define S_BCM1480_MC_CLK_RATIO 0 +#define M_BCM1480_MC_CLK_RATIO _SB_MAKEMASK(6, S_BCM1480_MC_CLK_RATIO) +#define V_BCM1480_MC_CLK_RATIO(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CLK_RATIO) +#define G_BCM1480_MC_CLK_RATIO(x) _SB_GETVALUE(x, S_BCM1480_MC_CLK_RATIO, M_BCM1480_MC_CLK_RATIO) + +#define V_BCM1480_MC_CLK_RATIO_DEFAULT V_BCM1480_MC_CLK_RATIO(10) + +#define S_BCM1480_MC_REF_RATE 8 +#define M_BCM1480_MC_REF_RATE _SB_MAKEMASK(8, S_BCM1480_MC_REF_RATE) +#define V_BCM1480_MC_REF_RATE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_REF_RATE) +#define G_BCM1480_MC_REF_RATE(x) _SB_GETVALUE(x, S_BCM1480_MC_REF_RATE, M_BCM1480_MC_REF_RATE) + +#define K_BCM1480_MC_REF_RATE_100MHz 0x31 +#define K_BCM1480_MC_REF_RATE_200MHz 0x62 +#define K_BCM1480_MC_REF_RATE_400MHz 0xC4 + +#define V_BCM1480_MC_REF_RATE_100MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz) +#define V_BCM1480_MC_REF_RATE_200MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz) +#define V_BCM1480_MC_REF_RATE_400MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz) +#define V_BCM1480_MC_REF_RATE_DEFAULT V_BCM1480_MC_REF_RATE_400MHz + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define M_BCM1480_MC_AUTO_REF_DIS _SB_MAKEMASK1(16) +#endif + +/* + * ODT Register (Table 99) + */ + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define M_BCM1480_MC_RD_ODT0_CS0 _SB_MAKEMASK1(0) +#define M_BCM1480_MC_RD_ODT0_CS2 _SB_MAKEMASK1(1) +#define M_BCM1480_MC_RD_ODT0_CS4 _SB_MAKEMASK1(2) +#define M_BCM1480_MC_RD_ODT0_CS6 _SB_MAKEMASK1(3) +#define M_BCM1480_MC_WR_ODT0_CS0 _SB_MAKEMASK1(4) +#define M_BCM1480_MC_WR_ODT0_CS2 _SB_MAKEMASK1(5) +#define M_BCM1480_MC_WR_ODT0_CS4 _SB_MAKEMASK1(6) +#define M_BCM1480_MC_WR_ODT0_CS6 _SB_MAKEMASK1(7) +#define M_BCM1480_MC_RD_ODT2_CS0 _SB_MAKEMASK1(8) +#define M_BCM1480_MC_RD_ODT2_CS2 _SB_MAKEMASK1(9) +#define M_BCM1480_MC_RD_ODT2_CS4 _SB_MAKEMASK1(10) +#define M_BCM1480_MC_RD_ODT2_CS6 _SB_MAKEMASK1(11) +#define M_BCM1480_MC_WR_ODT2_CS0 _SB_MAKEMASK1(12) +#define M_BCM1480_MC_WR_ODT2_CS2 _SB_MAKEMASK1(13) +#define M_BCM1480_MC_WR_ODT2_CS4 _SB_MAKEMASK1(14) +#define M_BCM1480_MC_WR_ODT2_CS6 _SB_MAKEMASK1(15) +#define M_BCM1480_MC_RD_ODT4_CS0 _SB_MAKEMASK1(16) +#define M_BCM1480_MC_RD_ODT4_CS2 _SB_MAKEMASK1(17) +#define M_BCM1480_MC_RD_ODT4_CS4 _SB_MAKEMASK1(18) +#define M_BCM1480_MC_RD_ODT4_CS6 _SB_MAKEMASK1(19) +#define M_BCM1480_MC_WR_ODT4_CS0 _SB_MAKEMASK1(20) +#define M_BCM1480_MC_WR_ODT4_CS2 _SB_MAKEMASK1(21) +#define M_BCM1480_MC_WR_ODT4_CS4 _SB_MAKEMASK1(22) +#define M_BCM1480_MC_WR_ODT4_CS6 _SB_MAKEMASK1(23) +#define M_BCM1480_MC_RD_ODT6_CS0 _SB_MAKEMASK1(24) +#define M_BCM1480_MC_RD_ODT6_CS2 _SB_MAKEMASK1(25) +#define M_BCM1480_MC_RD_ODT6_CS4 _SB_MAKEMASK1(26) +#define M_BCM1480_MC_RD_ODT6_CS6 _SB_MAKEMASK1(27) +#define M_BCM1480_MC_WR_ODT6_CS0 _SB_MAKEMASK1(28) +#define M_BCM1480_MC_WR_ODT6_CS2 _SB_MAKEMASK1(29) +#define M_BCM1480_MC_WR_ODT6_CS4 _SB_MAKEMASK1(30) +#define M_BCM1480_MC_WR_ODT6_CS6 _SB_MAKEMASK1(31) + +#define M_BCM1480_MC_CS_ODD_ODT_EN _SB_MAKEMASK1(32) + +#define S_BCM1480_MC_ODT0 0 +#define M_BCM1480_MC_ODT0 _SB_MAKEMASK(8, S_BCM1480_MC_ODT0) +#define V_BCM1480_MC_ODT0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT0) + +#define S_BCM1480_MC_ODT2 8 +#define M_BCM1480_MC_ODT2 _SB_MAKEMASK(8, S_BCM1480_MC_ODT2) +#define V_BCM1480_MC_ODT2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT2) + +#define S_BCM1480_MC_ODT4 16 +#define M_BCM1480_MC_ODT4 _SB_MAKEMASK(8, S_BCM1480_MC_ODT4) +#define V_BCM1480_MC_ODT4(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT4) + +#define S_BCM1480_MC_ODT6 24 +#define M_BCM1480_MC_ODT6 _SB_MAKEMASK(8, S_BCM1480_MC_ODT6) +#define V_BCM1480_MC_ODT6(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT6) +#endif + +/* + * Memory DLL Configuration Register (Table 93) + */ + +#define S_BCM1480_MC_ADDR_COARSE_ADJ 0 +#define M_BCM1480_MC_ADDR_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_ADDR_COARSE_ADJ) +#define V_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ) +#define G_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ, M_BCM1480_MC_ADDR_COARSE_ADJ) +#define V_BCM1480_MC_ADDR_COARSE_ADJ_DEFAULT V_BCM1480_MC_ADDR_COARSE_ADJ(0x0) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_ADDR_FREQ_RANGE 8 +#define M_BCM1480_MC_ADDR_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FREQ_RANGE) +#define V_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE) +#define G_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE, M_BCM1480_MC_ADDR_FREQ_RANGE) +#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT V_BCM1480_MC_ADDR_FREQ_RANGE(0x4) +#endif + +#define S_BCM1480_MC_ADDR_FINE_ADJ 8 +#define M_BCM1480_MC_ADDR_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FINE_ADJ) +#define V_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ) +#define G_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ, M_BCM1480_MC_ADDR_FINE_ADJ) +#define V_BCM1480_MC_ADDR_FINE_ADJ_DEFAULT V_BCM1480_MC_ADDR_FINE_ADJ(0x8) + +#define S_BCM1480_MC_DQI_COARSE_ADJ 16 +#define M_BCM1480_MC_DQI_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_DQI_COARSE_ADJ) +#define V_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ) +#define G_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ, M_BCM1480_MC_DQI_COARSE_ADJ) +#define V_BCM1480_MC_DQI_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQI_COARSE_ADJ(0x0) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_DQI_FREQ_RANGE 24 +#define M_BCM1480_MC_DQI_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FREQ_RANGE) +#define V_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE) +#define G_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE, M_BCM1480_MC_DQI_FREQ_RANGE) +#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQI_FREQ_RANGE(0x4) +#endif + +#define S_BCM1480_MC_DQI_FINE_ADJ 24 +#define M_BCM1480_MC_DQI_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FINE_ADJ) +#define V_BCM1480_MC_DQI_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ) +#define G_BCM1480_MC_DQI_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ, M_BCM1480_MC_DQI_FINE_ADJ) +#define V_BCM1480_MC_DQI_FINE_ADJ_DEFAULT V_BCM1480_MC_DQI_FINE_ADJ(0x8) + +#define S_BCM1480_MC_DQO_COARSE_ADJ 32 +#define M_BCM1480_MC_DQO_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_DQO_COARSE_ADJ) +#define V_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ) +#define G_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ, M_BCM1480_MC_DQO_COARSE_ADJ) +#define V_BCM1480_MC_DQO_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQO_COARSE_ADJ(0x0) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_DQO_FREQ_RANGE 40 +#define M_BCM1480_MC_DQO_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FREQ_RANGE) +#define V_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE) +#define G_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE, M_BCM1480_MC_DQO_FREQ_RANGE) +#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQO_FREQ_RANGE(0x4) +#endif + +#define S_BCM1480_MC_DQO_FINE_ADJ 40 +#define M_BCM1480_MC_DQO_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FINE_ADJ) +#define V_BCM1480_MC_DQO_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ) +#define G_BCM1480_MC_DQO_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ, M_BCM1480_MC_DQO_FINE_ADJ) +#define V_BCM1480_MC_DQO_FINE_ADJ_DEFAULT V_BCM1480_MC_DQO_FINE_ADJ(0x8) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_DLL_PDSEL 44 +#define M_BCM1480_MC_DLL_PDSEL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_PDSEL) +#define V_BCM1480_MC_DLL_PDSEL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_PDSEL) +#define G_BCM1480_MC_DLL_PDSEL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_PDSEL, M_BCM1480_MC_DLL_PDSEL) +#define V_BCM1480_MC_DLL_DEFAULT_PDSEL V_BCM1480_MC_DLL_PDSEL(0x0) + +#define M_BCM1480_MC_DLL_REGBYPASS _SB_MAKEMASK1(46) +#define M_BCM1480_MC_DQO_SHIFT _SB_MAKEMASK1(47) +#endif + +#define S_BCM1480_MC_DLL_DEFAULT 48 +#define M_BCM1480_MC_DLL_DEFAULT _SB_MAKEMASK(6, S_BCM1480_MC_DLL_DEFAULT) +#define V_BCM1480_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_DEFAULT) +#define G_BCM1480_MC_DLL_DEFAULT(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_DEFAULT, M_BCM1480_MC_DLL_DEFAULT) +#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT V_BCM1480_MC_DLL_DEFAULT(0x10) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_DLL_REGCTRL 54 +#define M_BCM1480_MC_DLL_REGCTRL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_REGCTRL) +#define V_BCM1480_MC_DLL_REGCTRL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_REGCTRL) +#define G_BCM1480_MC_DLL_REGCTRL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_REGCTRL, M_BCM1480_MC_DLL_REGCTRL) +#define V_BCM1480_MC_DLL_DEFAULT_REGCTRL V_BCM1480_MC_DLL_REGCTRL(0x0) +#endif + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_DLL_FREQ_RANGE 56 +#define M_BCM1480_MC_DLL_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DLL_FREQ_RANGE) +#define V_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE) +#define G_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE, M_BCM1480_MC_DLL_FREQ_RANGE) +#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT V_BCM1480_MC_DLL_FREQ_RANGE(0x4) +#endif + +#define S_BCM1480_MC_DLL_STEP_SIZE 56 +#define M_BCM1480_MC_DLL_STEP_SIZE _SB_MAKEMASK(4, S_BCM1480_MC_DLL_STEP_SIZE) +#define V_BCM1480_MC_DLL_STEP_SIZE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE) +#define G_BCM1480_MC_DLL_STEP_SIZE(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE, M_BCM1480_MC_DLL_STEP_SIZE) +#define V_BCM1480_MC_DLL_STEP_SIZE_DEFAULT V_BCM1480_MC_DLL_STEP_SIZE(0x8) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_DLL_BGCTRL 60 +#define M_BCM1480_MC_DLL_BGCTRL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_BGCTRL) +#define V_BCM1480_MC_DLL_BGCTRL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_BGCTRL) +#define G_BCM1480_MC_DLL_BGCTRL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_BGCTRL, M_BCM1480_MC_DLL_BGCTRL) +#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL V_BCM1480_MC_DLL_BGCTRL(0x0) +#endif + +#define M_BCM1480_MC_DLL_BYPASS _SB_MAKEMASK1(63) + +/* + * Memory Drive Configuration Register (Table 94) + */ + +#define S_BCM1480_MC_RTT_BYP_PULLDOWN 0 +#define M_BCM1480_MC_RTT_BYP_PULLDOWN _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLDOWN) +#define V_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN) +#define G_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN, M_BCM1480_MC_RTT_BYP_PULLDOWN) + +#define S_BCM1480_MC_RTT_BYP_PULLUP 6 +#define M_BCM1480_MC_RTT_BYP_PULLUP _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLUP) +#define V_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP) +#define G_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP, M_BCM1480_MC_RTT_BYP_PULLUP) + +#define M_BCM1480_MC_RTT_BYPASS _SB_MAKEMASK1(8) +#define M_BCM1480_MC_RTT_COMP_MOV_AVG _SB_MAKEMASK1(9) + +#define S_BCM1480_MC_PVT_BYP_C1_PULLDOWN 10 +#define M_BCM1480_MC_PVT_BYP_C1_PULLDOWN _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN) +#define V_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN) +#define G_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN, M_BCM1480_MC_PVT_BYP_C1_PULLDOWN) + +#define S_BCM1480_MC_PVT_BYP_C1_PULLUP 15 +#define M_BCM1480_MC_PVT_BYP_C1_PULLUP _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLUP) +#define V_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP) +#define G_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP, M_BCM1480_MC_PVT_BYP_C1_PULLUP) + +#define S_BCM1480_MC_PVT_BYP_C2_PULLDOWN 20 +#define M_BCM1480_MC_PVT_BYP_C2_PULLDOWN _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN) +#define V_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN) +#define G_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN, M_BCM1480_MC_PVT_BYP_C2_PULLDOWN) + +#define S_BCM1480_MC_PVT_BYP_C2_PULLUP 25 +#define M_BCM1480_MC_PVT_BYP_C2_PULLUP _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLUP) +#define V_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP) +#define G_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP, M_BCM1480_MC_PVT_BYP_C2_PULLUP) + +#define M_BCM1480_MC_PVT_BYPASS _SB_MAKEMASK1(30) +#define M_BCM1480_MC_PVT_COMP_MOV_AVG _SB_MAKEMASK1(31) + +#define M_BCM1480_MC_CLK_CLASS _SB_MAKEMASK1(34) +#define M_BCM1480_MC_DATA_CLASS _SB_MAKEMASK1(35) +#define M_BCM1480_MC_ADDR_CLASS _SB_MAKEMASK1(36) + +#define M_BCM1480_MC_DQ_ODT_75 _SB_MAKEMASK1(37) +#define M_BCM1480_MC_DQ_ODT_150 _SB_MAKEMASK1(38) +#define M_BCM1480_MC_DQS_ODT_75 _SB_MAKEMASK1(39) +#define M_BCM1480_MC_DQS_ODT_150 _SB_MAKEMASK1(40) +#define M_BCM1480_MC_DQS_DIFF _SB_MAKEMASK1(41) + +/* + * ECC Test Data Register (Table 95) + */ + +#define S_BCM1480_MC_DATA_INVERT 0 +#define M_DATA_ECC_INVERT _SB_MAKEMASK(64, S_BCM1480_MC_ECC_INVERT) + +/* + * ECC Test ECC Register (Table 96) + */ + +#define S_BCM1480_MC_ECC_INVERT 0 +#define M_BCM1480_MC_ECC_INVERT _SB_MAKEMASK(8, S_BCM1480_MC_ECC_INVERT) + +/* + * SDRAM Timing Register (Table 97) + */ + +#define S_BCM1480_MC_tRCD 0 +#define M_BCM1480_MC_tRCD _SB_MAKEMASK(4, S_BCM1480_MC_tRCD) +#define V_BCM1480_MC_tRCD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCD) +#define G_BCM1480_MC_tRCD(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCD, M_BCM1480_MC_tRCD) +#define K_BCM1480_MC_tRCD_DEFAULT 3 +#define V_BCM1480_MC_tRCD_DEFAULT V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT) + +#define S_BCM1480_MC_tCL 4 +#define M_BCM1480_MC_tCL _SB_MAKEMASK(4, S_BCM1480_MC_tCL) +#define V_BCM1480_MC_tCL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tCL) +#define G_BCM1480_MC_tCL(x) _SB_GETVALUE(x, S_BCM1480_MC_tCL, M_BCM1480_MC_tCL) +#define K_BCM1480_MC_tCL_DEFAULT 2 +#define V_BCM1480_MC_tCL_DEFAULT V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT) + +#define M_BCM1480_MC_tCrDh _SB_MAKEMASK1(8) + +#define S_BCM1480_MC_tWR 9 +#define M_BCM1480_MC_tWR _SB_MAKEMASK(3, S_BCM1480_MC_tWR) +#define V_BCM1480_MC_tWR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tWR) +#define G_BCM1480_MC_tWR(x) _SB_GETVALUE(x, S_BCM1480_MC_tWR, M_BCM1480_MC_tWR) +#define K_BCM1480_MC_tWR_DEFAULT 2 +#define V_BCM1480_MC_tWR_DEFAULT V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT) + +#define S_BCM1480_MC_tCwD 12 +#define M_BCM1480_MC_tCwD _SB_MAKEMASK(4, S_BCM1480_MC_tCwD) +#define V_BCM1480_MC_tCwD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tCwD) +#define G_BCM1480_MC_tCwD(x) _SB_GETVALUE(x, S_BCM1480_MC_tCwD, M_BCM1480_MC_tCwD) +#define K_BCM1480_MC_tCwD_DEFAULT 1 +#define V_BCM1480_MC_tCwD_DEFAULT V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT) + +#define S_BCM1480_MC_tRP 16 +#define M_BCM1480_MC_tRP _SB_MAKEMASK(4, S_BCM1480_MC_tRP) +#define V_BCM1480_MC_tRP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRP) +#define G_BCM1480_MC_tRP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRP, M_BCM1480_MC_tRP) +#define K_BCM1480_MC_tRP_DEFAULT 4 +#define V_BCM1480_MC_tRP_DEFAULT V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT) + +#define S_BCM1480_MC_tRRD 20 +#define M_BCM1480_MC_tRRD _SB_MAKEMASK(4, S_BCM1480_MC_tRRD) +#define V_BCM1480_MC_tRRD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRRD) +#define G_BCM1480_MC_tRRD(x) _SB_GETVALUE(x, S_BCM1480_MC_tRRD, M_BCM1480_MC_tRRD) +#define K_BCM1480_MC_tRRD_DEFAULT 2 +#define V_BCM1480_MC_tRRD_DEFAULT V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT) + +#define S_BCM1480_MC_tRCw 24 +#define M_BCM1480_MC_tRCw _SB_MAKEMASK(5, S_BCM1480_MC_tRCw) +#define V_BCM1480_MC_tRCw(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCw) +#define G_BCM1480_MC_tRCw(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCw, M_BCM1480_MC_tRCw) +#define K_BCM1480_MC_tRCw_DEFAULT 10 +#define V_BCM1480_MC_tRCw_DEFAULT V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT) + +#define S_BCM1480_MC_tRCr 32 +#define M_BCM1480_MC_tRCr _SB_MAKEMASK(5, S_BCM1480_MC_tRCr) +#define V_BCM1480_MC_tRCr(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCr) +#define G_BCM1480_MC_tRCr(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCr, M_BCM1480_MC_tRCr) +#define K_BCM1480_MC_tRCr_DEFAULT 9 +#define V_BCM1480_MC_tRCr_DEFAULT V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define S_BCM1480_MC_tFAW 40 +#define M_BCM1480_MC_tFAW _SB_MAKEMASK(6, S_BCM1480_MC_tFAW) +#define V_BCM1480_MC_tFAW(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tFAW) +#define G_BCM1480_MC_tFAW(x) _SB_GETVALUE(x, S_BCM1480_MC_tFAW, M_BCM1480_MC_tFAW) +#define K_BCM1480_MC_tFAW_DEFAULT 0 +#define V_BCM1480_MC_tFAW_DEFAULT V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT) +#endif + +#define S_BCM1480_MC_tRFC 48 +#define M_BCM1480_MC_tRFC _SB_MAKEMASK(7, S_BCM1480_MC_tRFC) +#define V_BCM1480_MC_tRFC(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRFC) +#define G_BCM1480_MC_tRFC(x) _SB_GETVALUE(x, S_BCM1480_MC_tRFC, M_BCM1480_MC_tRFC) +#define K_BCM1480_MC_tRFC_DEFAULT 12 +#define V_BCM1480_MC_tRFC_DEFAULT V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT) + +#define S_BCM1480_MC_tFIFO 56 +#define M_BCM1480_MC_tFIFO _SB_MAKEMASK(2, S_BCM1480_MC_tFIFO) +#define V_BCM1480_MC_tFIFO(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tFIFO) +#define G_BCM1480_MC_tFIFO(x) _SB_GETVALUE(x, S_BCM1480_MC_tFIFO, M_BCM1480_MC_tFIFO) +#define K_BCM1480_MC_tFIFO_DEFAULT 0 +#define V_BCM1480_MC_tFIFO_DEFAULT V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT) + +#define S_BCM1480_MC_tW2R 58 +#define M_BCM1480_MC_tW2R _SB_MAKEMASK(2, S_BCM1480_MC_tW2R) +#define V_BCM1480_MC_tW2R(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tW2R) +#define G_BCM1480_MC_tW2R(x) _SB_GETVALUE(x, S_BCM1480_MC_tW2R, M_BCM1480_MC_tW2R) +#define K_BCM1480_MC_tW2R_DEFAULT 1 +#define V_BCM1480_MC_tW2R_DEFAULT V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT) + +#define S_BCM1480_MC_tR2W 60 +#define M_BCM1480_MC_tR2W _SB_MAKEMASK(2, S_BCM1480_MC_tR2W) +#define V_BCM1480_MC_tR2W(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tR2W) +#define G_BCM1480_MC_tR2W(x) _SB_GETVALUE(x, S_BCM1480_MC_tR2W, M_BCM1480_MC_tR2W) +#define K_BCM1480_MC_tR2W_DEFAULT 0 +#define V_BCM1480_MC_tR2W_DEFAULT V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT) + +#define M_BCM1480_MC_tR2R _SB_MAKEMASK1(62) + +#define V_BCM1480_MC_TIMING_DEFAULT (M_BCM1480_MC_tR2R | \ + V_BCM1480_MC_tFIFO_DEFAULT | \ + V_BCM1480_MC_tR2W_DEFAULT | \ + V_BCM1480_MC_tW2R_DEFAULT | \ + V_BCM1480_MC_tRFC_DEFAULT | \ + V_BCM1480_MC_tRCr_DEFAULT | \ + V_BCM1480_MC_tRCw_DEFAULT | \ + V_BCM1480_MC_tRRD_DEFAULT | \ + V_BCM1480_MC_tRP_DEFAULT | \ + V_BCM1480_MC_tCwD_DEFAULT | \ + V_BCM1480_MC_tWR_DEFAULT | \ + M_BCM1480_MC_tCrDh | \ + V_BCM1480_MC_tCL_DEFAULT | \ + V_BCM1480_MC_tRCD_DEFAULT) + +/* + * SDRAM Timing Register 2 + */ + +#if SIBYTE_HDR_FEATURE(1480, PASS2) + +#define S_BCM1480_MC_tAL 0 +#define M_BCM1480_MC_tAL _SB_MAKEMASK(4, S_BCM1480_MC_tAL) +#define V_BCM1480_MC_tAL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tAL) +#define G_BCM1480_MC_tAL(x) _SB_GETVALUE(x, S_BCM1480_MC_tAL, M_BCM1480_MC_tAL) +#define K_BCM1480_MC_tAL_DEFAULT 0 +#define V_BCM1480_MC_tAL_DEFAULT V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT) + +#define S_BCM1480_MC_tRTP 4 +#define M_BCM1480_MC_tRTP _SB_MAKEMASK(3, S_BCM1480_MC_tRTP) +#define V_BCM1480_MC_tRTP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRTP) +#define G_BCM1480_MC_tRTP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRTP, M_BCM1480_MC_tRTP) +#define K_BCM1480_MC_tRTP_DEFAULT 2 +#define V_BCM1480_MC_tRTP_DEFAULT V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT) + +#define S_BCM1480_MC_tW2W 8 +#define M_BCM1480_MC_tW2W _SB_MAKEMASK(2, S_BCM1480_MC_tW2W) +#define V_BCM1480_MC_tW2W(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tW2W) +#define G_BCM1480_MC_tW2W(x) _SB_GETVALUE(x, S_BCM1480_MC_tW2W, M_BCM1480_MC_tW2W) +#define K_BCM1480_MC_tW2W_DEFAULT 0 +#define V_BCM1480_MC_tW2W_DEFAULT V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT) + +#define S_BCM1480_MC_tRAP 12 +#define M_BCM1480_MC_tRAP _SB_MAKEMASK(4, S_BCM1480_MC_tRAP) +#define V_BCM1480_MC_tRAP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRAP) +#define G_BCM1480_MC_tRAP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRAP, M_BCM1480_MC_tRAP) +#define K_BCM1480_MC_tRAP_DEFAULT 0 +#define V_BCM1480_MC_tRAP_DEFAULT V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT) + +#endif + + + +/* + * Global Registers: single instances per BCM1480 + */ + +/* + * Global Configuration Register (Table 99) + */ + +#define S_BCM1480_MC_BLK_SET_MARK 8 +#define M_BCM1480_MC_BLK_SET_MARK _SB_MAKEMASK(4, S_BCM1480_MC_BLK_SET_MARK) +#define V_BCM1480_MC_BLK_SET_MARK(x) _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_SET_MARK) +#define G_BCM1480_MC_BLK_SET_MARK(x) _SB_GETVALUE(x, S_BCM1480_MC_BLK_SET_MARK, M_BCM1480_MC_BLK_SET_MARK) + +#define S_BCM1480_MC_BLK_CLR_MARK 12 +#define M_BCM1480_MC_BLK_CLR_MARK _SB_MAKEMASK(4, S_BCM1480_MC_BLK_CLR_MARK) +#define V_BCM1480_MC_BLK_CLR_MARK(x) _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_CLR_MARK) +#define G_BCM1480_MC_BLK_CLR_MARK(x) _SB_GETVALUE(x, S_BCM1480_MC_BLK_CLR_MARK, M_BCM1480_MC_BLK_CLR_MARK) + +#define M_BCM1480_MC_PKT_PRIORITY _SB_MAKEMASK1(16) + +#define S_BCM1480_MC_MAX_AGE 20 +#define M_BCM1480_MC_MAX_AGE _SB_MAKEMASK(4, S_BCM1480_MC_MAX_AGE) +#define V_BCM1480_MC_MAX_AGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_MAX_AGE) +#define G_BCM1480_MC_MAX_AGE(x) _SB_GETVALUE(x, S_BCM1480_MC_MAX_AGE, M_BCM1480_MC_MAX_AGE) + +#define M_BCM1480_MC_BERR_DISABLE _SB_MAKEMASK1(29) +#define M_BCM1480_MC_FORCE_SEQ _SB_MAKEMASK1(30) +#define M_BCM1480_MC_VGEN _SB_MAKEMASK1(32) + +#define S_BCM1480_MC_SLEW 33 +#define M_BCM1480_MC_SLEW _SB_MAKEMASK(2, S_BCM1480_MC_SLEW) +#define V_BCM1480_MC_SLEW(x) _SB_MAKEVALUE(x, S_BCM1480_MC_SLEW) +#define G_BCM1480_MC_SLEW(x) _SB_GETVALUE(x, S_BCM1480_MC_SLEW, M_BCM1480_MC_SLEW) + +#define M_BCM1480_MC_SSTL_VOLTAGE _SB_MAKEMASK1(35) + +/* + * Global Channel Interleave Register (Table 100) + */ + +#define S_BCM1480_MC_INTLV0 0 +#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0) +#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0) +#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0) + +#define S_BCM1480_MC_INTLV1 8 +#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1) +#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1) +#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1) + +#define S_BCM1480_MC_INTLV_MODE 16 +#define M_BCM1480_MC_INTLV_MODE _SB_MAKEMASK(3, S_BCM1480_MC_INTLV_MODE) +#define V_BCM1480_MC_INTLV_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV_MODE) +#define G_BCM1480_MC_INTLV_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV_MODE, M_BCM1480_MC_INTLV_MODE) + +#define K_BCM1480_MC_INTLV_MODE_NONE 0x0 +#define K_BCM1480_MC_INTLV_MODE_01 0x1 +#define K_BCM1480_MC_INTLV_MODE_23 0x2 +#define K_BCM1480_MC_INTLV_MODE_01_23 0x3 +#define K_BCM1480_MC_INTLV_MODE_0123 0x4 + +#define V_BCM1480_MC_INTLV_MODE_NONE V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE) +#define V_BCM1480_MC_INTLV_MODE_01 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01) +#define V_BCM1480_MC_INTLV_MODE_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23) +#define V_BCM1480_MC_INTLV_MODE_01_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23) +#define V_BCM1480_MC_INTLV_MODE_0123 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123) + +/* + * ECC Status Register + */ + +#define S_BCM1480_MC_ECC_ERR_ADDR 0 +#define M_BCM1480_MC_ECC_ERR_ADDR _SB_MAKEMASK(37, S_BCM1480_MC_ECC_ERR_ADDR) +#define V_BCM1480_MC_ECC_ERR_ADDR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR) +#define G_BCM1480_MC_ECC_ERR_ADDR(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR, M_BCM1480_MC_ECC_ERR_ADDR) + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define M_BCM1480_MC_ECC_ERR_RMW _SB_MAKEMASK1(60) +#endif + +#define M_BCM1480_MC_ECC_MULT_ERR_DET _SB_MAKEMASK1(61) +#define M_BCM1480_MC_ECC_UERR_DET _SB_MAKEMASK1(62) +#define M_BCM1480_MC_ECC_CERR_DET _SB_MAKEMASK1(63) + +/* + * Global ECC Address Register (Table 102) + */ + +#define S_BCM1480_MC_ECC_CORR_ADDR 0 +#define M_BCM1480_MC_ECC_CORR_ADDR _SB_MAKEMASK(37, S_BCM1480_MC_ECC_CORR_ADDR) +#define V_BCM1480_MC_ECC_CORR_ADDR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR) +#define G_BCM1480_MC_ECC_CORR_ADDR(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR, M_BCM1480_MC_ECC_CORR_ADDR) + +/* + * Global ECC Correction Register (Table 103) + */ + +#define S_BCM1480_MC_ECC_CORRECT 0 +#define M_BCM1480_MC_ECC_CORRECT _SB_MAKEMASK(64, S_BCM1480_MC_ECC_CORRECT) +#define V_BCM1480_MC_ECC_CORRECT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORRECT) +#define G_BCM1480_MC_ECC_CORRECT(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORRECT, M_BCM1480_MC_ECC_CORRECT) + +/* + * Global ECC Performance Counters Control Register (Table 104) + */ + +#define S_BCM1480_MC_CHANNEL_SELECT 0 +#define M_BCM1480_MC_CHANNEL_SELECT _SB_MAKEMASK(4, S_BCM1480_MC_CHANNEL_SELECT) +#define V_BCM1480_MC_CHANNEL_SELECT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CHANNEL_SELECT) +#define G_BCM1480_MC_CHANNEL_SELECT(x) _SB_GETVALUE(x, S_BCM1480_MC_CHANNEL_SELECT, M_BCM1480_MC_CHANNEL_SELECT) +#define K_BCM1480_MC_CHANNEL_SELECT_0 0x1 +#define K_BCM1480_MC_CHANNEL_SELECT_1 0x2 +#define K_BCM1480_MC_CHANNEL_SELECT_2 0x4 +#define K_BCM1480_MC_CHANNEL_SELECT_3 0x8 + +#endif /* _BCM1480_MC_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_regs.h b/arch/mips/include/asm/sibyte/bcm1480_regs.h new file mode 100644 index 000000000000..b4077bb72611 --- /dev/null +++ b/arch/mips/include/asm/sibyte/bcm1480_regs.h @@ -0,0 +1,902 @@ +/* ********************************************************************* + * BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package + * + * Register Definitions File: bcm1480_regs.h + * + * This module contains the addresses of the on-chip peripherals + * on the BCM1280 and BCM1480. + * + * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03) + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + +#ifndef _BCM1480_REGS_H +#define _BCM1480_REGS_H + +#include "sb1250_defs.h" + +/* ********************************************************************* + * Pull in the BCM1250's registers since a great deal of the 1480's + * functions are the same as the BCM1250. + ********************************************************************* */ + +#include "sb1250_regs.h" + + +/* ********************************************************************* + * Some general notes: + * + * Register addresses are grouped by function and follow the order + * of the User Manual. + * + * For the most part, when there is more than one peripheral + * of the same type on the SOC, the constants below will be + * offsets from the base of each peripheral. For example, + * the MAC registers are described as offsets from the first + * MAC register, and there will be a MAC_REGISTER() macro + * to calculate the base address of a given MAC. + * + * The information in this file is based on the BCM1X55/BCM1X80 + * User Manual, Document 1X55_1X80-UM100-R, 22/12/03. + * + * This file is basically a "what's new" header file. Since the + * BCM1250 and the new BCM1480 (and derivatives) share many common + * features, this file contains only what's new or changed from + * the 1250. (above, you can see that we include the 1250 symbols + * to get the base functionality). + * + * In software, be sure to use the correct symbols, particularly + * for blocks that are different between the two chip families. + * All BCM1480-specific symbols have _BCM1480_ in their names, + * and all BCM1250-specific and "base" functions that are common in + * both chips have no special names (this is for compatibility with + * older include files). Therefore, if you're working with the + * SCD, which is very different on each chip, A_SCD_xxx implies + * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480 + * version. + ********************************************************************* */ + + +/* ********************************************************************* + * Memory Controller Registers (Section 6) + ********************************************************************* */ + +#define A_BCM1480_MC_BASE_0 0x0010050000 +#define A_BCM1480_MC_BASE_1 0x0010051000 +#define A_BCM1480_MC_BASE_2 0x0010052000 +#define A_BCM1480_MC_BASE_3 0x0010053000 +#define BCM1480_MC_REGISTER_SPACING 0x1000 + +#define A_BCM1480_MC_BASE(ctlid) (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING) +#define A_BCM1480_MC_REGISTER(ctlid, reg) (A_BCM1480_MC_BASE(ctlid)+(reg)) + +#define R_BCM1480_MC_CONFIG 0x0000000100 +#define R_BCM1480_MC_CS_START 0x0000000120 +#define R_BCM1480_MC_CS_END 0x0000000140 +#define S_BCM1480_MC_CS_STARTEND 24 + +#define R_BCM1480_MC_CS01_ROW0 0x0000000180 +#define R_BCM1480_MC_CS01_ROW1 0x00000001A0 +#define R_BCM1480_MC_CS23_ROW0 0x0000000200 +#define R_BCM1480_MC_CS23_ROW1 0x0000000220 +#define R_BCM1480_MC_CS01_COL0 0x0000000280 +#define R_BCM1480_MC_CS01_COL1 0x00000002A0 +#define R_BCM1480_MC_CS23_COL0 0x0000000300 +#define R_BCM1480_MC_CS23_COL1 0x0000000320 + +#define R_BCM1480_MC_CSX_BASE 0x0000000180 +#define R_BCM1480_MC_CSX_ROW0 0x0000000000 /* relative to CSX_BASE */ +#define R_BCM1480_MC_CSX_ROW1 0x0000000020 /* relative to CSX_BASE */ +#define R_BCM1480_MC_CSX_COL0 0x0000000100 /* relative to CSX_BASE */ +#define R_BCM1480_MC_CSX_COL1 0x0000000120 /* relative to CSX_BASE */ +#define BCM1480_MC_CSX_SPACING 0x0000000080 /* CS23 relative to CS01 */ + +#define R_BCM1480_MC_CS01_BA 0x0000000380 +#define R_BCM1480_MC_CS23_BA 0x00000003A0 +#define R_BCM1480_MC_DRAMCMD 0x0000000400 +#define R_BCM1480_MC_DRAMMODE 0x0000000420 +#define R_BCM1480_MC_CLOCK_CFG 0x0000000440 +#define R_BCM1480_MC_MCLK_CFG R_BCM1480_MC_CLOCK_CFG +#define R_BCM1480_MC_TEST_DATA 0x0000000480 +#define R_BCM1480_MC_TEST_ECC 0x00000004A0 +#define R_BCM1480_MC_TIMING1 0x00000004C0 +#define R_BCM1480_MC_TIMING2 0x00000004E0 +#define R_BCM1480_MC_DLL_CFG 0x0000000500 +#define R_BCM1480_MC_DRIVE_CFG 0x0000000520 + +#if SIBYTE_HDR_FEATURE(1480, PASS2) +#define R_BCM1480_MC_ODT 0x0000000460 +#define R_BCM1480_MC_ECC_STATUS 0x0000000540 +#endif + +/* Global registers (single instance) */ +#define A_BCM1480_MC_GLB_CONFIG 0x0010054100 +#define A_BCM1480_MC_GLB_INTLV 0x0010054120 +#define A_BCM1480_MC_GLB_ECC_STATUS 0x0010054140 +#define A_BCM1480_MC_GLB_ECC_ADDR 0x0010054160 +#define A_BCM1480_MC_GLB_ECC_CORRECT 0x0010054180 +#define A_BCM1480_MC_GLB_PERF_CNT_CONTROL 0x00100541A0 + +/* ********************************************************************* + * L2 Cache Control Registers (Section 5) + ********************************************************************* */ + +#define A_BCM1480_L2_BASE 0x0010040000 + +#define A_BCM1480_L2_READ_TAG 0x0010040018 +#define A_BCM1480_L2_ECC_TAG 0x0010040038 +#define A_BCM1480_L2_MISC0_VALUE 0x0010040058 +#define A_BCM1480_L2_MISC1_VALUE 0x0010040078 +#define A_BCM1480_L2_MISC2_VALUE 0x0010040098 +#define A_BCM1480_L2_MISC_CONFIG 0x0010040040 /* x040 */ +#define A_BCM1480_L2_CACHE_DISABLE 0x0010040060 /* x060 */ +#define A_BCM1480_L2_MAKECACHEDISABLE(x) (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12)) +#define A_BCM1480_L2_WAY_ENABLE_3_0 0x0010040080 /* x080 */ +#define A_BCM1480_L2_WAY_ENABLE_7_4 0x00100400A0 /* x0A0 */ +#define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12)) +#define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12)) +#define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12)) +#define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12)) +#define A_BCM1480_L2_WAY_LOCAL_3_0 0x0010040100 /* x100 */ +#define A_BCM1480_L2_WAY_LOCAL_7_4 0x0010040120 /* x120 */ +#define A_BCM1480_L2_WAY_REMOTE_3_0 0x0010040140 /* x140 */ +#define A_BCM1480_L2_WAY_REMOTE_7_4 0x0010040160 /* x160 */ +#define A_BCM1480_L2_WAY_AGENT_3_0 0x00100400C0 /* xxC0 */ +#define A_BCM1480_L2_WAY_AGENT_7_4 0x00100400E0 /* xxE0 */ +#define A_BCM1480_L2_WAY_ENABLE(A, banks) (A | (((~(banks))&0x0F) << 8)) +#define A_BCM1480_L2_BANK_BASE 0x00D0300000 +#define A_BCM1480_L2_BANK_ADDRESS(b) (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17)) +#define A_BCM1480_L2_MGMT_TAG_BASE 0x00D0000000 + + +/* ********************************************************************* + * PCI-X Interface Registers (Section 7) + ********************************************************************* */ + +#define A_BCM1480_PCI_BASE 0x0010061400 + +#define A_BCM1480_PCI_RESET 0x0010061400 +#define A_BCM1480_PCI_DLL 0x0010061500 + +#define A_BCM1480_PCI_TYPE00_HEADER 0x002E000000 + +/* ********************************************************************* + * Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6) + ********************************************************************* */ + +/* No register changes with Rev.C BCM1250, but one additional MAC */ + +#define A_BCM1480_MAC_BASE_2 0x0010066000 + +#ifndef A_MAC_BASE_2 +#define A_MAC_BASE_2 A_BCM1480_MAC_BASE_2 +#endif + +#define A_BCM1480_MAC_BASE_3 0x0010067000 +#define A_MAC_BASE_3 A_BCM1480_MAC_BASE_3 + +#define R_BCM1480_MAC_DMA_OODPKTLOST 0x00000038 + +#ifndef R_MAC_DMA_OODPKTLOST +#define R_MAC_DMA_OODPKTLOST R_BCM1480_MAC_DMA_OODPKTLOST +#endif + + +/* ********************************************************************* + * DUART Registers (Section 14) + ********************************************************************* */ + +/* No significant differences from BCM1250, two DUARTs */ + +/* Conventions, per user manual: + * DUART generic, channels A,B,C,D + * DUART0 implementing channels A,B + * DUART1 inplementing channels C,D + */ + +#define BCM1480_DUART_NUM_PORTS 4 + +#define A_BCM1480_DUART0 0x0010060000 +#define A_BCM1480_DUART1 0x0010060400 +#define A_BCM1480_DUART(chan) ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1) + +#define BCM1480_DUART_CHANREG_SPACING 0x100 +#define A_BCM1480_DUART_CHANREG(chan, reg) \ + (A_BCM1480_DUART(chan) + \ + BCM1480_DUART_CHANREG_SPACING * (((chan) & 1) + 1) + (reg)) +#define A_BCM1480_DUART_CTRLREG(chan, reg) \ + (A_BCM1480_DUART(chan) + \ + BCM1480_DUART_CHANREG_SPACING * 3 + (reg)) + +#define DUART_IMRISR_SPACING 0x20 +#define DUART_INCHNG_SPACING 0x10 + +#define R_BCM1480_DUART_IMRREG(chan) \ + (R_DUART_IMR_A + ((chan) & 1) * DUART_IMRISR_SPACING) +#define R_BCM1480_DUART_ISRREG(chan) \ + (R_DUART_ISR_A + ((chan) & 1) * DUART_IMRISR_SPACING) +#define R_BCM1480_DUART_INCHREG(chan) \ + (R_DUART_IN_CHNG_A + ((chan) & 1) * DUART_INCHNG_SPACING) + +#define A_BCM1480_DUART_IMRREG(chan) \ + (A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_IMRREG(chan))) +#define A_BCM1480_DUART_ISRREG(chan) \ + (A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_ISRREG(chan))) + +#define A_BCM1480_DUART_IN_PORT(chan) \ + (A_BCM1480_DUART_CTRLREG((chan), R_DUART_IN_PORT)) + +/* + * These constants are the absolute addresses. + */ + +#define A_BCM1480_DUART_MODE_REG_1_C 0x0010060400 +#define A_BCM1480_DUART_MODE_REG_2_C 0x0010060410 +#define A_BCM1480_DUART_STATUS_C 0x0010060420 +#define A_BCM1480_DUART_CLK_SEL_C 0x0010060430 +#define A_BCM1480_DUART_FULL_CTL_C 0x0010060440 +#define A_BCM1480_DUART_CMD_C 0x0010060450 +#define A_BCM1480_DUART_RX_HOLD_C 0x0010060460 +#define A_BCM1480_DUART_TX_HOLD_C 0x0010060470 +#define A_BCM1480_DUART_OPCR_C 0x0010060480 +#define A_BCM1480_DUART_AUX_CTRL_C 0x0010060490 + +#define A_BCM1480_DUART_MODE_REG_1_D 0x0010060500 +#define A_BCM1480_DUART_MODE_REG_2_D 0x0010060510 +#define A_BCM1480_DUART_STATUS_D 0x0010060520 +#define A_BCM1480_DUART_CLK_SEL_D 0x0010060530 +#define A_BCM1480_DUART_FULL_CTL_D 0x0010060540 +#define A_BCM1480_DUART_CMD_D 0x0010060550 +#define A_BCM1480_DUART_RX_HOLD_D 0x0010060560 +#define A_BCM1480_DUART_TX_HOLD_D 0x0010060570 +#define A_BCM1480_DUART_OPCR_D 0x0010060580 +#define A_BCM1480_DUART_AUX_CTRL_D 0x0010060590 + +#define A_BCM1480_DUART_INPORT_CHNG_CD 0x0010060600 +#define A_BCM1480_DUART_AUX_CTRL_CD 0x0010060610 +#define A_BCM1480_DUART_ISR_C 0x0010060620 +#define A_BCM1480_DUART_IMR_C 0x0010060630 +#define A_BCM1480_DUART_ISR_D 0x0010060640 +#define A_BCM1480_DUART_IMR_D 0x0010060650 +#define A_BCM1480_DUART_OUT_PORT_CD 0x0010060660 +#define A_BCM1480_DUART_OPCR_CD 0x0010060670 +#define A_BCM1480_DUART_IN_PORT_CD 0x0010060680 +#define A_BCM1480_DUART_ISR_CD 0x0010060690 +#define A_BCM1480_DUART_IMR_CD 0x00100606A0 +#define A_BCM1480_DUART_SET_OPR_CD 0x00100606B0 +#define A_BCM1480_DUART_CLEAR_OPR_CD 0x00100606C0 +#define A_BCM1480_DUART_INPORT_CHNG_C 0x00100606D0 +#define A_BCM1480_DUART_INPORT_CHNG_D 0x00100606E0 + + +/* ********************************************************************* + * Generic Bus Registers (Section 15) and PCMCIA Registers (Section 16) + ********************************************************************* */ + +#define A_BCM1480_IO_PCMCIA_CFG_B 0x0010061A58 +#define A_BCM1480_IO_PCMCIA_STATUS_B 0x0010061A68 + +/* ********************************************************************* + * GPIO Registers (Section 17) + ********************************************************************* */ + +/* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */ + +#define A_BCM1480_GPIO_INT_ADD_TYPE 0x0010061A78 +#define R_BCM1480_GPIO_INT_ADD_TYPE (-8) + +#define A_GPIO_INT_ADD_TYPE A_BCM1480_GPIO_INT_ADD_TYPE +#define R_GPIO_INT_ADD_TYPE R_BCM1480_GPIO_INT_ADD_TYPE + +/* ********************************************************************* + * SMBus Registers (Section 18) + ********************************************************************* */ + +/* No changes from BCM1250 */ + +/* ********************************************************************* + * Timer Registers (Sections 4.6) + ********************************************************************* */ + +/* BCM1480 has two additional watchdogs */ + +/* Watchdog timers */ + +#define A_BCM1480_SCD_WDOG_2 0x0010022050 +#define A_BCM1480_SCD_WDOG_3 0x0010022150 + +#define BCM1480_SCD_NUM_WDOGS 4 + +#define A_BCM1480_SCD_WDOG_BASE(w) (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100) +#define A_BCM1480_SCD_WDOG_REGISTER(w, r) (A_BCM1480_SCD_WDOG_BASE(w) + (r)) + +#define A_BCM1480_SCD_WDOG_INIT_2 0x0010022050 +#define A_BCM1480_SCD_WDOG_CNT_2 0x0010022058 +#define A_BCM1480_SCD_WDOG_CFG_2 0x0010022060 + +#define A_BCM1480_SCD_WDOG_INIT_3 0x0010022150 +#define A_BCM1480_SCD_WDOG_CNT_3 0x0010022158 +#define A_BCM1480_SCD_WDOG_CFG_3 0x0010022160 + +/* BCM1480 has two additional compare registers */ + +#define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT A_SCD_ZBBUS_CYCLE_COUNT +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE 0x0010020C00 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0 A_SCD_ZBBUS_CYCLE_CP0 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1 A_SCD_ZBBUS_CYCLE_CP1 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2 0x0010020C10 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3 0x0010020C18 + +/* ********************************************************************* + * System Control Registers (Section 4.2) + ********************************************************************* */ + +/* Scratch register in different place */ + +#define A_BCM1480_SCD_SCRATCH 0x100200A0 + +/* ********************************************************************* + * System Address Trap Registers (Section 4.9) + ********************************************************************* */ + +/* No changes from BCM1250 */ + +/* ********************************************************************* + * System Interrupt Mapper Registers (Sections 4.3-4.5) + ********************************************************************* */ + +#define A_BCM1480_IMR_CPU0_BASE 0x0010020000 +#define A_BCM1480_IMR_CPU1_BASE 0x0010022000 +#define A_BCM1480_IMR_CPU2_BASE 0x0010024000 +#define A_BCM1480_IMR_CPU3_BASE 0x0010026000 +#define BCM1480_IMR_REGISTER_SPACING 0x2000 +#define BCM1480_IMR_REGISTER_SPACING_SHIFT 13 + +#define A_BCM1480_IMR_MAPPER(cpu) (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING) +#define A_BCM1480_IMR_REGISTER(cpu, reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg)) + +/* Most IMR registers are 128 bits, implemented as non-contiguous + 64-bit registers high (_H) and low (_L) */ +#define BCM1480_IMR_HL_SPACING 0x1000 + +#define R_BCM1480_IMR_INTERRUPT_DIAG_H 0x0010 +#define R_BCM1480_IMR_LDT_INTERRUPT_H 0x0018 +#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H 0x0020 +#define R_BCM1480_IMR_INTERRUPT_MASK_H 0x0028 +#define R_BCM1480_IMR_INTERRUPT_TRACE_H 0x0038 +#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040 +#define R_BCM1480_IMR_LDT_INTERRUPT_SET 0x0048 +#define R_BCM1480_IMR_MAILBOX_0_CPU 0x00C0 +#define R_BCM1480_IMR_MAILBOX_0_SET_CPU 0x00C8 +#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU 0x00D0 +#define R_BCM1480_IMR_MAILBOX_1_CPU 0x00E0 +#define R_BCM1480_IMR_MAILBOX_1_SET_CPU 0x00E8 +#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU 0x00F0 +#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H 0x0100 +#define BCM1480_IMR_INTERRUPT_STATUS_COUNT 8 +#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H 0x0200 +#define BCM1480_IMR_INTERRUPT_MAP_COUNT 64 + +#define R_BCM1480_IMR_INTERRUPT_DIAG_L 0x1010 +#define R_BCM1480_IMR_LDT_INTERRUPT_L 0x1018 +#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L 0x1020 +#define R_BCM1480_IMR_INTERRUPT_MASK_L 0x1028 +#define R_BCM1480_IMR_INTERRUPT_TRACE_L 0x1038 +#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040 +#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L 0x1100 +#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L 0x1200 + +#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE 0x0010028000 +#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE 0x0010028100 +#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE 0x0010028200 +#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE 0x0010028300 +#define BCM1480_IMR_ALIAS_MAILBOX_SPACING 0100 + +#define A_BCM1480_IMR_ALIAS_MAILBOX(cpu) (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \ + (cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING) +#define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu, reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg)) + +#define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 /* 0x0x0 */ +#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* 0x0x8 */ + +/* + * these macros work together to build the address of a mailbox + * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2) + * for mbox_0_set_cpu2 returns 0x00100240C8 + */ +#define R_BCM1480_IMR_MAILBOX_CPU 0x00 +#define R_BCM1480_IMR_MAILBOX_SET 0x08 +#define R_BCM1480_IMR_MAILBOX_CLR 0x10 +#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20 +#define A_BCM1480_MAILBOX_REGISTER(num, reg, cpu) \ + (A_BCM1480_IMR_CPU0_BASE + \ + (num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \ + (cpu * BCM1480_IMR_REGISTER_SPACING) + \ + (R_BCM1480_IMR_MAILBOX_0_CPU + reg)) + +/* ********************************************************************* + * System Performance Counter Registers (Section 4.7) + ********************************************************************* */ + +/* BCM1480 has four more performance counter registers, and two control + registers. */ + +#define A_BCM1480_SCD_PERF_CNT_BASE 0x00100204C0 + +#define A_BCM1480_SCD_PERF_CNT_CFG0 0x00100204C0 +#define A_BCM1480_SCD_PERF_CNT_CFG_0 A_BCM1480_SCD_PERF_CNT_CFG0 +#define A_BCM1480_SCD_PERF_CNT_CFG1 0x00100204C8 +#define A_BCM1480_SCD_PERF_CNT_CFG_1 A_BCM1480_SCD_PERF_CNT_CFG1 + +#define A_BCM1480_SCD_PERF_CNT_0 A_SCD_PERF_CNT_0 +#define A_BCM1480_SCD_PERF_CNT_1 A_SCD_PERF_CNT_1 +#define A_BCM1480_SCD_PERF_CNT_2 A_SCD_PERF_CNT_2 +#define A_BCM1480_SCD_PERF_CNT_3 A_SCD_PERF_CNT_3 + +#define A_BCM1480_SCD_PERF_CNT_4 0x00100204F0 +#define A_BCM1480_SCD_PERF_CNT_5 0x00100204F8 +#define A_BCM1480_SCD_PERF_CNT_6 0x0010020500 +#define A_BCM1480_SCD_PERF_CNT_7 0x0010020508 + +#define BCM1480_SCD_NUM_PERF_CNT 8 +#define BCM1480_SCD_PERF_CNT_SPACING 8 +#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING)) + +/* ********************************************************************* + * System Bus Watcher Registers (Section 4.8) + ********************************************************************* */ + + +/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */ + +#define A_BCM1480_BUS_ERR_STATUS_DEBUG 0x00100208D8 + +/* ********************************************************************* + * System Debug Controller Registers (Section 19) + ********************************************************************* */ + +/* Same as 1250 */ + +/* ********************************************************************* + * System Trace Unit Registers (Sections 4.10) + ********************************************************************* */ + +/* Same as 1250 */ + +/* ********************************************************************* + * Data Mover DMA Registers (Section 10.7) + ********************************************************************* */ + +/* Same as 1250 */ + + +/* ********************************************************************* + * HyperTransport Interface Registers (Section 8) + ********************************************************************* */ + +#define BCM1480_HT_NUM_PORTS 3 +#define BCM1480_HT_PORT_SPACING 0x800 +#define A_BCM1480_HT_PORT_HEADER(x) (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING)) + +#define A_BCM1480_HT_PORT0_HEADER 0x00FE000000 +#define A_BCM1480_HT_PORT1_HEADER 0x00FE000800 +#define A_BCM1480_HT_PORT2_HEADER 0x00FE001000 +#define A_BCM1480_HT_TYPE00_HEADER 0x00FE002000 + + +/* ********************************************************************* + * Node Controller Registers (Section 9) + ********************************************************************* */ + +#define A_BCM1480_NC_BASE 0x00DFBD0000 + +#define A_BCM1480_NC_RLD_FIELD 0x00DFBD0000 +#define A_BCM1480_NC_RLD_TRIGGER 0x00DFBD0020 +#define A_BCM1480_NC_RLD_BAD_ERROR 0x00DFBD0040 +#define A_BCM1480_NC_RLD_COR_ERROR 0x00DFBD0060 +#define A_BCM1480_NC_RLD_ECC_STATUS 0x00DFBD0080 +#define A_BCM1480_NC_RLD_WAY_ENABLE 0x00DFBD00A0 +#define A_BCM1480_NC_RLD_RANDOM_LFSR 0x00DFBD00C0 + +#define A_BCM1480_NC_INTERRUPT_STATUS 0x00DFBD00E0 +#define A_BCM1480_NC_INTERRUPT_ENABLE 0x00DFBD0100 +#define A_BCM1480_NC_TIMEOUT_COUNTER 0x00DFBD0120 +#define A_BCM1480_NC_TIMEOUT_COUNTER_SEL 0x00DFBD0140 + +#define A_BCM1480_NC_CREDIT_STATUS_REG0 0x00DFBD0200 +#define A_BCM1480_NC_CREDIT_STATUS_REG1 0x00DFBD0220 +#define A_BCM1480_NC_CREDIT_STATUS_REG2 0x00DFBD0240 +#define A_BCM1480_NC_CREDIT_STATUS_REG3 0x00DFBD0260 +#define A_BCM1480_NC_CREDIT_STATUS_REG4 0x00DFBD0280 +#define A_BCM1480_NC_CREDIT_STATUS_REG5 0x00DFBD02A0 +#define A_BCM1480_NC_CREDIT_STATUS_REG6 0x00DFBD02C0 +#define A_BCM1480_NC_CREDIT_STATUS_REG7 0x00DFBD02E0 +#define A_BCM1480_NC_CREDIT_STATUS_REG8 0x00DFBD0300 +#define A_BCM1480_NC_CREDIT_STATUS_REG9 0x00DFBD0320 +#define A_BCM1480_NC_CREDIT_STATUS_REG10 0x00DFBE0000 +#define A_BCM1480_NC_CREDIT_STATUS_REG11 0x00DFBE0020 +#define A_BCM1480_NC_CREDIT_STATUS_REG12 0x00DFBE0040 + +#define A_BCM1480_NC_SR_TIMEOUT_COUNTER 0x00DFBE0060 +#define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080 + + +/* ********************************************************************* + * H&R Block Configuration Registers (Section 12.4) + ********************************************************************* */ + +#define A_BCM1480_HR_BASE_0 0x00DF820000 +#define A_BCM1480_HR_BASE_1 0x00DF8A0000 +#define A_BCM1480_HR_BASE_2 0x00DF920000 +#define BCM1480_HR_REGISTER_SPACING 0x80000 + +#define A_BCM1480_HR_BASE(idx) (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING)) +#define A_BCM1480_HR_REGISTER(idx, reg) (A_BCM1480_HR_BASE(idx) + (reg)) + +#define R_BCM1480_HR_CFG 0x0000000000 + +#define R_BCM1480_HR_MAPPING 0x0000010010 + +#define BCM1480_HR_RULE_SPACING 0x0000000010 +#define BCM1480_HR_NUM_RULES 16 +#define BCM1480_HR_OP_OFFSET 0x0000000100 +#define BCM1480_HR_TYPE_OFFSET 0x0000000108 +#define R_BCM1480_HR_RULE_OP(idx) (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING)) +#define R_BCM1480_HR_RULE_TYPE(idx) (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING)) + +#define BCM1480_HR_LEAF_SPACING 0x0000000010 +#define BCM1480_HR_NUM_LEAVES 10 +#define BCM1480_HR_LEAF_OFFSET 0x0000000300 +#define R_BCM1480_HR_HA_LEAF0(idx) (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING)) + +#define R_BCM1480_HR_EX_LEAF0 0x00000003A0 + +#define BCM1480_HR_PATH_SPACING 0x0000000010 +#define BCM1480_HR_NUM_PATHS 16 +#define BCM1480_HR_PATH_OFFSET 0x0000000600 +#define R_BCM1480_HR_PATH(idx) (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING)) + +#define R_BCM1480_HR_PATH_DEFAULT 0x0000000700 + +#define BCM1480_HR_ROUTE_SPACING 8 +#define BCM1480_HR_NUM_ROUTES 512 +#define BCM1480_HR_ROUTE_OFFSET 0x0000001000 +#define R_BCM1480_HR_RT_WORD(idx) (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING)) + + +/* checked to here - ehs */ +/* ********************************************************************* + * Packet Manager DMA Registers (Section 12.5) + ********************************************************************* */ + +#define A_BCM1480_PM_BASE 0x0010056000 + +#define A_BCM1480_PMI_LCL_0 0x0010058000 +#define A_BCM1480_PMO_LCL_0 0x001005C000 +#define A_BCM1480_PMI_OFFSET_0 (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE) +#define A_BCM1480_PMO_OFFSET_0 (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE) + +#define BCM1480_PM_LCL_REGISTER_SPACING 0x100 +#define BCM1480_PM_NUM_CHANNELS 32 + +#define A_BCM1480_PMI_LCL_BASE(idx) (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING)) +#define A_BCM1480_PMI_LCL_REGISTER(idx, reg) (A_BCM1480_PMI_LCL_BASE(idx) + (reg)) +#define A_BCM1480_PMO_LCL_BASE(idx) (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING)) +#define A_BCM1480_PMO_LCL_REGISTER(idx, reg) (A_BCM1480_PMO_LCL_BASE(idx) + (reg)) + +#define BCM1480_PM_INT_PACKING 8 +#define BCM1480_PM_INT_FUNCTION_SPACING 0x40 +#define BCM1480_PM_INT_NUM_FUNCTIONS 3 + +/* + * DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n) + */ + +#define R_BCM1480_PM_BASE_SIZE 0x0000000000 +#define R_BCM1480_PM_CNT 0x0000000008 +#define R_BCM1480_PM_PFCNT 0x0000000010 +#define R_BCM1480_PM_LAST 0x0000000018 +#define R_BCM1480_PM_PFINDX 0x0000000020 +#define R_BCM1480_PM_INT_WMK 0x0000000028 +#define R_BCM1480_PM_CONFIG0 0x0000000030 +#define R_BCM1480_PM_LOCALDEBUG 0x0000000078 +#define R_BCM1480_PM_CACHEABILITY 0x0000000080 /* PMI only */ +#define R_BCM1480_PM_INT_CNFG 0x0000000088 +#define R_BCM1480_PM_DESC_MERGE_TIMER 0x0000000090 +#define R_BCM1480_PM_LOCALDEBUG_PIB 0x00000000F8 /* PMI only */ +#define R_BCM1480_PM_LOCALDEBUG_POB 0x00000000F8 /* PMO only */ + +/* + * Global Registers (Not Channelized) + */ + +#define A_BCM1480_PMI_GLB_0 0x0010056000 +#define A_BCM1480_PMO_GLB_0 0x0010057000 + +/* + * PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0 + */ + +#define R_BCM1480_PM_PMO_MAPPING 0x00000008C8 /* PMO only */ + +#define A_BCM1480_PM_PMO_MAPPING (A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING) + +/* + * Interrupt mapping registers + */ + + +#define A_BCM1480_PMI_INT_0 0x0010056800 +#define A_BCM1480_PMI_INT(q) (A_BCM1480_PMI_INT_0 + ((q>>8)<<8)) +#define A_BCM1480_PMI_INT_OFFSET_0 (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE) +#define A_BCM1480_PMO_INT_0 0x0010057800 +#define A_BCM1480_PMO_INT(q) (A_BCM1480_PMO_INT_0 + ((q>>8)<<8)) +#define A_BCM1480_PMO_INT_OFFSET_0 (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE) + +/* + * Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0 + */ + +#define R_BCM1480_PM_INT_ST 0x0000000000 +#define R_BCM1480_PM_INT_MSK 0x0000000040 +#define R_BCM1480_PM_INT_CLR 0x0000000080 +#define R_BCM1480_PM_MRGD_INT 0x00000000C0 + +/* + * Debug registers (global) + */ + +#define A_BCM1480_PM_GLOBALDEBUGMODE_PMI 0x0010056000 +#define A_BCM1480_PM_GLOBALDEBUG_PID 0x00100567F8 +#define A_BCM1480_PM_GLOBALDEBUG_PIB 0x0010056FF8 +#define A_BCM1480_PM_GLOBALDEBUGMODE_PMO 0x0010057000 +#define A_BCM1480_PM_GLOBALDEBUG_POD 0x00100577F8 +#define A_BCM1480_PM_GLOBALDEBUG_POB 0x0010057FF8 + +/* ********************************************************************* + * Switch performance counters + ********************************************************************* */ + +#define A_BCM1480_SWPERF_CFG 0xdfb91800 +#define A_BCM1480_SWPERF_CNT0 0xdfb91880 +#define A_BCM1480_SWPERF_CNT1 0xdfb91888 +#define A_BCM1480_SWPERF_CNT2 0xdfb91890 +#define A_BCM1480_SWPERF_CNT3 0xdfb91898 + + +/* ********************************************************************* + * Switch Trace Unit + ********************************************************************* */ + +#define A_BCM1480_SWTRC_MATCH_CONTROL_0 0xDFB91000 +#define A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 0xDFB91100 +#define A_BCM1480_SWTRC_MATCH_DATA_MASK_0 0xDFB91108 +#define A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 0xDFB91200 +#define A_BCM1480_SWTRC_MATCH_TAG_MAKS_0 0xDFB91208 +#define A_BCM1480_SWTRC_EVENT_0 0xDFB91300 +#define A_BCM1480_SWTRC_SEQUENCE_0 0xDFB91400 + +#define A_BCM1480_SWTRC_CFG 0xDFB91500 +#define A_BCM1480_SWTRC_READ 0xDFB91508 + +#define A_BCM1480_SWDEBUG_SCHEDSTOP 0xDFB92000 + +#define A_BCM1480_SWTRC_MATCH_CONTROL(x) (A_BCM1480_SWTRC_MATCH_CONTROL_0 + ((x)*8)) +#define A_BCM1480_SWTRC_EVENT(x) (A_BCM1480_SWTRC_EVENT_0 + ((x)*8)) +#define A_BCM1480_SWTRC_SEQUENCE(x) (A_BCM1480_SWTRC_SEQUENCE_0 + ((x)*8)) + +#define A_BCM1480_SWTRC_MATCH_DATA_VALUE(x) (A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 + ((x)*16)) +#define A_BCM1480_SWTRC_MATCH_DATA_MASK(x) (A_BCM1480_SWTRC_MATCH_DATA_MASK_0 + ((x)*16)) +#define A_BCM1480_SWTRC_MATCH_TAG_VALUE(x) (A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 + ((x)*16)) +#define A_BCM1480_SWTRC_MATCH_TAG_MASK(x) (A_BCM1480_SWTRC_MATCH_TAG_MASK_0 + ((x)*16)) + + + +/* ********************************************************************* + * High-Speed Port Registers (Section 13) + ********************************************************************* */ + +#define A_BCM1480_HSP_BASE_0 0x00DF810000 +#define A_BCM1480_HSP_BASE_1 0x00DF890000 +#define A_BCM1480_HSP_BASE_2 0x00DF910000 +#define BCM1480_HSP_REGISTER_SPACING 0x80000 + +#define A_BCM1480_HSP_BASE(idx) (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING)) +#define A_BCM1480_HSP_REGISTER(idx, reg) (A_BCM1480_HSP_BASE(idx) + (reg)) + +#define R_BCM1480_HSP_RX_SPI4_CFG_0 0x0000000000 +#define R_BCM1480_HSP_RX_SPI4_CFG_1 0x0000000008 +#define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010 +#define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018 +#define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN 0x0000000020 +#define R_BCM1480_HSP_RX_SPI4_PORT_INT_STATUS 0x0000000028 + +#define R_BCM1480_HSP_RX_SPI4_CALENDAR_0 0x0000000200 +#define R_BCM1480_HSP_RX_SPI4_CALENDAR_1 0x0000000208 + +#define R_BCM1480_HSP_RX_PLL_CNFG 0x0000000800 +#define R_BCM1480_HSP_RX_CALIBRATION 0x0000000808 +#define R_BCM1480_HSP_RX_TEST 0x0000000810 +#define R_BCM1480_HSP_RX_DIAG_DETAILS 0x0000000818 +#define R_BCM1480_HSP_RX_DIAG_CRC_0 0x0000000820 +#define R_BCM1480_HSP_RX_DIAG_CRC_1 0x0000000828 +#define R_BCM1480_HSP_RX_DIAG_HTCMD 0x0000000830 +#define R_BCM1480_HSP_RX_DIAG_PKTCTL 0x0000000838 + +#define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER 0x0000000870 + +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0 0x0000020020 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1 0x0000020028 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2 0x0000020030 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3 0x0000020038 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4 0x0000020040 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5 0x0000020048 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6 0x0000020050 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7 0x0000020058 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx)) + +/* XXX Following registers were shuffled. Renamed/renumbered per errata. */ +#define R_BCM1480_HSP_RX_HT_RAMALLOC_0 0x0000020078 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_1 0x0000020080 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_2 0x0000020088 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_3 0x0000020090 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_4 0x0000020098 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_5 0x00000200A0 + +#define R_BCM1480_HSP_RX_SPI_WATERMARK_0 0x00000200B0 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_1 0x00000200B8 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_2 0x00000200C0 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_3 0x00000200C8 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_4 0x00000200D0 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_5 0x00000200D8 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_6 0x00000200E0 +#define R_BCM1480_HSP_RX_SPI_WATERMARK_7 0x00000200E8 +#define R_BCM1480_HSP_RX_SPI_WATERMARK(idx) (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx)) + +#define R_BCM1480_HSP_RX_VIS_CMDQ_0 0x00000200F0 +#define R_BCM1480_HSP_RX_VIS_CMDQ_1 0x00000200F8 +#define R_BCM1480_HSP_RX_VIS_CMDQ_2 0x0000020100 +#define R_BCM1480_HSP_RX_RAM_READCTL 0x0000020108 +#define R_BCM1480_HSP_RX_RAM_READWINDOW 0x0000020110 +#define R_BCM1480_HSP_RX_RF_READCTL 0x0000020118 +#define R_BCM1480_HSP_RX_RF_READWINDOW 0x0000020120 + +#define R_BCM1480_HSP_TX_SPI4_CFG_0 0x0000040000 +#define R_BCM1480_HSP_TX_SPI4_CFG_1 0x0000040008 +#define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT 0x0000040010 + +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0 0x0000040020 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1 0x0000040028 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2 0x0000040030 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3 0x0000040038 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4 0x0000040040 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5 0x0000040048 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6 0x0000040050 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7 0x0000040058 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx)) +#define R_BCM1480_HSP_TX_NPC_RAMALLOC 0x0000040078 +#define R_BCM1480_HSP_TX_RSP_RAMALLOC 0x0000040080 +#define R_BCM1480_HSP_TX_PC_RAMALLOC 0x0000040088 +#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0 0x0000040090 +#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1 0x0000040098 +#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2 0x00000400A0 + +#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 0x00000400B0 +#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_1 0x00000400B8 +#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2 0x00000400C0 +#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3 0x00000400C8 +#define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx)) +#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT 0x00000400D0 +#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT 0x00000400D8 + +#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 0x00000400E0 +#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1 0x00000400E8 +#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2 0x00000400F0 +#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3 0x00000400F8 +#define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx)) +#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT 0x0000040100 +#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT 0x0000040108 + +#define R_BCM1480_HSP_TX_SPI4_CALENDAR_0 0x0000040200 +#define R_BCM1480_HSP_TX_SPI4_CALENDAR_1 0x0000040208 + +#define R_BCM1480_HSP_TX_PLL_CNFG 0x0000040800 +#define R_BCM1480_HSP_TX_CALIBRATION 0x0000040808 +#define R_BCM1480_HSP_TX_TEST 0x0000040810 + +#define R_BCM1480_HSP_TX_VIS_CMDQ_0 0x0000040840 +#define R_BCM1480_HSP_TX_VIS_CMDQ_1 0x0000040848 +#define R_BCM1480_HSP_TX_VIS_CMDQ_2 0x0000040850 +#define R_BCM1480_HSP_TX_RAM_READCTL 0x0000040860 +#define R_BCM1480_HSP_TX_RAM_READWINDOW 0x0000040868 +#define R_BCM1480_HSP_TX_RF_READCTL 0x0000040870 +#define R_BCM1480_HSP_TX_RF_READWINDOW 0x0000040878 + +#define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880 +#define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN 0x0000040888 + +#define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400 +#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x) (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x)) + + + +/* ********************************************************************* + * Physical Address Map (Table 10 and Figure 7) + ********************************************************************* */ + +#define A_BCM1480_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000) +#define A_BCM1480_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024)) +#define A_BCM1480_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000) +#define A_BCM1480_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000) +#define A_BCM1480_PHYS_GENBUS _SB_MAKE64(0x0010090000) +#define A_BCM1480_PHYS_GENBUS_END _SB_MAKE64(0x0028000000) +#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES _SB_MAKE64(0x0028000000) +#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES _SB_MAKE64(0x0029000000) +#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES _SB_MAKE64(0x002C000000) +#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES _SB_MAKE64(0x002E000000) +#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES _SB_MAKE64(0x002F000000) +#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES _SB_MAKE64(0x0030000000) +#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES _SB_MAKE64(0x0040000000) +#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS _SB_MAKE64(0x0060000000) +#define A_BCM1480_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000) +#define A_BCM1480_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000) +#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS _SB_MAKE64(0x00A8000000) +#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS _SB_MAKE64(0x00A9000000) +#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS _SB_MAKE64(0x00AC000000) +#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS _SB_MAKE64(0x00AE000000) +#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS _SB_MAKE64(0x00AF000000) +#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS _SB_MAKE64(0x00B0000000) +#define A_BCM1480_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000) +#define A_BCM1480_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000) +#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000) +#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000) +#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000) +#define A_BCM1480_PHYS_HS_SUBSYS _SB_MAKE64(0x00DF000000) +#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000) +#define A_BCM1480_PHYS_HT_IO_MATCH_BITS _SB_MAKE64(0x00FC000000) +#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000) +#define A_BCM1480_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000) +#define A_BCM1480_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024)) +#define A_BCM1480_PHYS_PCI_UPPER _SB_MAKE64(0x1000000000) +#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES _SB_MAKE64(0x2000000000) +#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS _SB_MAKE64(0x3000000000) +#define A_BCM1480_PHYS_HT_NODE_ALIAS _SB_MAKE64(0x4000000000) +#define A_BCM1480_PHYS_HT_FULLACCESS _SB_MAKE64(0xF000000000) + + +/* ********************************************************************* + * L2 Cache as RAM (Table 54) + ********************************************************************* */ + +#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000) +#define BCM1480_PHYS_L2CACHE_NUM_WAYS 8 +#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000100000) +#define A_BCM1480_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0300000) +#define A_BCM1480_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D0320000) +#define A_BCM1480_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D0340000) +#define A_BCM1480_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D0360000) +#define A_BCM1480_PHYS_L2CACHE_WAY4 _SB_MAKE64(0x00D0380000) +#define A_BCM1480_PHYS_L2CACHE_WAY5 _SB_MAKE64(0x00D03A0000) +#define A_BCM1480_PHYS_L2CACHE_WAY6 _SB_MAKE64(0x00D03C0000) +#define A_BCM1480_PHYS_L2CACHE_WAY7 _SB_MAKE64(0x00D03E0000) + +#endif /* _BCM1480_REGS_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_scd.h b/arch/mips/include/asm/sibyte/bcm1480_scd.h new file mode 100644 index 000000000000..25ef24cbb92a --- /dev/null +++ b/arch/mips/include/asm/sibyte/bcm1480_scd.h @@ -0,0 +1,406 @@ +/* ********************************************************************* + * BCM1280/BCM1400 Board Support Package + * + * SCD Constants and Macros File: bcm1480_scd.h + * + * This module contains constants and macros useful for + * manipulating the System Control and Debug module. + * + * BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03) + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003,2004,2005 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + +#ifndef _BCM1480_SCD_H +#define _BCM1480_SCD_H + +#include "sb1250_defs.h" + +/* ********************************************************************* + * Pull in the BCM1250's SCD since lots of stuff is the same. + ********************************************************************* */ + +#include "sb1250_scd.h" + +/* ********************************************************************* + * Some general notes: + * + * This file is basically a "what's new" header file. Since the + * BCM1250 and the new BCM1480 (and derivatives) share many common + * features, this file contains only what's new or changed from + * the 1250. (above, you can see that we include the 1250 symbols + * to get the base functionality). + * + * In software, be sure to use the correct symbols, particularly + * for blocks that are different between the two chip families. + * All BCM1480-specific symbols have _BCM1480_ in their names, + * and all BCM1250-specific and "base" functions that are common in + * both chips have no special names (this is for compatibility with + * older include files). Therefore, if you're working with the + * SCD, which is very different on each chip, A_SCD_xxx implies + * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480 + * version. + ********************************************************************* */ + +/* ********************************************************************* + * System control/debug registers + ********************************************************************* */ + +/* + * System Identification and Revision Register (Table 12) + * Register: SCD_SYSTEM_REVISION + * This register is field compatible with the 1250. + */ + +/* + * New part definitions + */ + +#define K_SYS_PART_BCM1480 0x1406 +#define K_SYS_PART_BCM1280 0x1206 +#define K_SYS_PART_BCM1455 0x1407 +#define K_SYS_PART_BCM1255 0x1257 +#define K_SYS_PART_BCM1158 0x1156 + +/* + * Manufacturing Information Register (Table 14) + * Register: SCD_SYSTEM_MANUF + */ + +/* + * System Configuration Register (Table 15) + * Register: SCD_SYSTEM_CFG + * Entire register is different from 1250, all new constants below + */ + +#define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0) +#define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1) +#define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2) +#define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3) +#define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4) +#define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5) + +#define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6) +#define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV) +#define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV) +#define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV) + +#define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11) +#define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV) +#define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV) +#define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV) + +#define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) +#define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17) + +#define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18) +#define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE) +#define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE) +#define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE) +#define K_BCM1480_SYS_BOOT_MODE_ROM32 0 +#define K_BCM1480_SYS_BOOT_MODE_ROM8 1 +#define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2 +#define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG 3 +#define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19) + +#define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20) +#define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21) +#define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) +#define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23) +#define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24) +#define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25) + +#define S_BCM1480_SYS_CONFIG 26 +#define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG) +#define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG) +#define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG) + +#define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32, 15) + +#define S_BCM1480_SYS_NODEID 47 +#define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID) +#define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID) +#define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID) + +#define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51) +#define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52) +#define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53) +#define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54) +#define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55) +#define S_BCM1480_SYS_DISABLECPU0 56 +#define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0) +#define S_BCM1480_SYS_DISABLECPU1 57 +#define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1) +#define S_BCM1480_SYS_DISABLECPU2 58 +#define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2) +#define S_BCM1480_SYS_DISABLECPU3 59 +#define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3) + +#define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60) +#define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61) +#define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62) +#define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63) + +/* + * Scratch Register (Table 16) + * Register: SCD_SYSTEM_SCRATCH + * Same as BCM1250 + */ + + +/* + * Mailbox Registers (Table 17) + * Registers: SCD_MBOX_{0,1}_CPU_x + * Same as BCM1250 + */ + + +/* + * See bcm1480_int.h for interrupt mapper registers. + */ + + +/* + * Watchdog Timer Initial Count Registers (Table 23) + * Registers: SCD_WDOG_INIT_CNT_x + * + * The watchdogs are almost the same as the 1250, except + * the configuration register has more bits to control the + * other CPUs. + */ + + +/* + * Watchdog Timer Configuration Registers (Table 25) + * Registers: SCD_WDOG_CFG_x + */ + +#define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0) + +#define S_BCM1480_SCD_WDOG_RESET_TYPE 2 +#define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE) +#define V_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE) +#define G_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE, M_BCM1480_SCD_WDOG_RESET_TYPE) + +#define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ +#define K_BCM1480_SCD_WDOG_RESET_SOFT 1 +#define K_BCM1480_SCD_WDOG_RESET_CPU0 3 +#define K_BCM1480_SCD_WDOG_RESET_CPU1 5 +#define K_BCM1480_SCD_WDOG_RESET_CPU2 9 +#define K_BCM1480_SCD_WDOG_RESET_CPU3 17 +#define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS 31 + + +#define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8) + +/* + * General Timer Initial Count Registers (Table 26) + * Registers: SCD_TIMER_INIT_x + * + * The timer registers are the same as the BCM1250 + */ + + +/* + * ZBbus Count Register (Table 29) + * Register: ZBBUS_CYCLE_COUNT + * + * Same as BCM1250 + */ + +/* + * ZBbus Compare Registers (Table 30) + * Registers: ZBBUS_CYCLE_CPx + * + * Same as BCM1250 + */ + + +/* + * System Performance Counter Configuration Register (Table 31) + * Register: PERF_CNT_CFG_0 + * + * SPC_CFG_SRC[0-3] is the same as the 1250. + * SPC_CFG_SRC[4-7] only exist on the 1480 + * The clear/enable bits are in different locations on the 1250 and 1480. + */ + +#define S_SPC_CFG_SRC4 32 +#define M_SPC_CFG_SRC4 _SB_MAKEMASK(8, S_SPC_CFG_SRC4) +#define V_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC4) +#define G_SPC_CFG_SRC4(x) _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4) + +#define S_SPC_CFG_SRC5 40 +#define M_SPC_CFG_SRC5 _SB_MAKEMASK(8, S_SPC_CFG_SRC5) +#define V_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC5) +#define G_SPC_CFG_SRC5(x) _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5) + +#define S_SPC_CFG_SRC6 48 +#define M_SPC_CFG_SRC6 _SB_MAKEMASK(8, S_SPC_CFG_SRC6) +#define V_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC6) +#define G_SPC_CFG_SRC6(x) _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6) + +#define S_SPC_CFG_SRC7 56 +#define M_SPC_CFG_SRC7 _SB_MAKEMASK(8, S_SPC_CFG_SRC7) +#define V_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC7) +#define G_SPC_CFG_SRC7(x) _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7) + +/* + * System Performance Counter Control Register (Table 32) + * Register: PERF_CNT_CFG_1 + * BCM1480 specific + */ +#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0) +#define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1) +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_SPC_CFG_CLEAR M_BCM1480_SPC_CFG_CLEAR +#define M_SPC_CFG_ENABLE M_BCM1480_SPC_CFG_ENABLE +#endif + +/* + * System Performance Counters (Table 33) + * Registers: PERF_CNT_x + */ + +#define S_BCM1480_SPC_CNT_COUNT 0 +#define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT) +#define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT) +#define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT) + +#define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40) + + +/* + * Bus Watcher Error Status Register (Tables 36, 37) + * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG + * Same as BCM1250. + */ + +/* + * Bus Watcher Error Data Registers (Table 38) + * Registers: BUS_ERR_DATA_x + * Same as BCM1250. + */ + +/* + * Bus Watcher L2 ECC Counter Register (Table 39) + * Register: BUS_L2_ERRORS + * Same as BCM1250. + */ + + +/* + * Bus Watcher Memory and I/O Error Counter Register (Table 40) + * Register: BUS_MEM_IO_ERRORS + * Same as BCM1250. + */ + + +/* + * Address Trap Registers + * + * Register layout same as BCM1250, almost. The bus agents + * are different, and the address trap configuration bits are + * slightly different. + */ + +#define M_BCM1480_ATRAP_INDEX _SB_MAKEMASK(4, 0) +#define M_BCM1480_ATRAP_ADDRESS _SB_MAKEMASK(40, 0) + +#define S_BCM1480_ATRAP_CFG_CNT 0 +#define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT) +#define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT) +#define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT) + +#define M_BCM1480_ATRAP_CFG_WRITE _SB_MAKEMASK1(3) +#define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4) +#define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5) +#define M_BCM1480_ATRAP_CFG_USESRC _SB_MAKEMASK1(6) +#define M_BCM1480_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7) + +#define S_BCM1480_ATRAP_CFG_AGENTID 8 +#define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID) +#define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID) +#define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID) + + +#define K_BCM1480_BUS_AGENT_CPU0 0 +#define K_BCM1480_BUS_AGENT_CPU1 1 +#define K_BCM1480_BUS_AGENT_NC 2 +#define K_BCM1480_BUS_AGENT_IOB 3 +#define K_BCM1480_BUS_AGENT_SCD 4 +#define K_BCM1480_BUS_AGENT_L2C 6 +#define K_BCM1480_BUS_AGENT_MC 7 +#define K_BCM1480_BUS_AGENT_CPU2 8 +#define K_BCM1480_BUS_AGENT_CPU3 9 +#define K_BCM1480_BUS_AGENT_PM 10 + +#define S_BCM1480_ATRAP_CFG_CATTR 12 +#define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR) +#define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR) +#define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR) + +#define K_BCM1480_ATRAP_CFG_CATTR_IGNORE 0 +#define K_BCM1480_ATRAP_CFG_CATTR_UNC 1 +#define K_BCM1480_ATRAP_CFG_CATTR_NONCOH 2 +#define K_BCM1480_ATRAP_CFG_CATTR_COHERENT 3 + +#define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14) + + +/* + * Trace Event Registers (Table 47) + * Same as BCM1250. + */ + +/* + * Trace Sequence Control Registers (Table 48) + * Registers: TRACE_SEQUENCE_x + * + * Same as BCM1250 except for two new fields. + */ + + +#define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN _SB_MAKEMASK1(25) + +#define S_BCM1480_SCD_TRSEQ_SWFUNC 26 +#define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC) +#define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC) +#define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC) + +/* + * Trace Control Register (Table 49) + * Register: TRACE_CFG + * + * BCM1480 changes to this register (other than location of the CUR_ADDR field) + * are defined below. + */ + +#define S_BCM1480_SCD_TRACE_CFG_MODE 16 +#define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE) +#define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE) +#define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE) + +#define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS 0 +#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1 +#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2 + +#endif /* _BCM1480_SCD_H */ diff --git a/arch/mips/include/asm/sibyte/bigsur.h b/arch/mips/include/asm/sibyte/bigsur.h new file mode 100644 index 000000000000..ebefe797fc1d --- /dev/null +++ b/arch/mips/include/asm/sibyte/bigsur.h @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __ASM_SIBYTE_BIGSUR_H +#define __ASM_SIBYTE_BIGSUR_H + +#include +#include + +#ifdef CONFIG_SIBYTE_BIGSUR +#define SIBYTE_BOARD_NAME "BCM91x80A/B (BigSur)" +#define SIBYTE_HAVE_PCMCIA 1 +#define SIBYTE_HAVE_IDE 1 +#endif + +/* Generic bus chip selects */ +#define LEDS_CS 3 +#define LEDS_PHYS 0x100a0000 + +#ifdef SIBYTE_HAVE_IDE +#define IDE_CS 4 +#define IDE_PHYS 0x100b0000 +#define K_GPIO_GB_IDE 4 +#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) +#endif + +#ifdef SIBYTE_HAVE_PCMCIA +#define PCMCIA_CS 6 +#define PCMCIA_PHYS 0x11000000 +#define K_GPIO_PC_READY 9 +#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY) +#endif + +#endif /* __ASM_SIBYTE_BIGSUR_H */ + diff --git a/arch/mips/include/asm/sibyte/board.h b/arch/mips/include/asm/sibyte/board.h new file mode 100644 index 000000000000..25372ae0e814 --- /dev/null +++ b/arch/mips/include/asm/sibyte/board.h @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _SIBYTE_BOARD_H +#define _SIBYTE_BOARD_H + +#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_CRHONE) || \ + defined(CONFIG_SIBYTE_CRHINE) || defined(CONFIG_SIBYTE_LITTLESUR) +#include +#endif + +#if defined(CONFIG_SIBYTE_SENTOSA) || defined(CONFIG_SIBYTE_RHONE) +#include +#endif + +#ifdef CONFIG_SIBYTE_CARMEL +#include +#endif + +#ifdef CONFIG_SIBYTE_BIGSUR +#include +#endif + +#ifdef __ASSEMBLY__ + +#ifdef LEDS_PHYS +#define setleds(t0, t1, c0, c1, c2, c3) \ + li t0, (LEDS_PHYS|0xa0000000); \ + li t1, c0; \ + sb t1, 0x18(t0); \ + li t1, c1; \ + sb t1, 0x10(t0); \ + li t1, c2; \ + sb t1, 0x08(t0); \ + li t1, c3; \ + sb t1, 0x00(t0) +#else +#define setleds(t0, t1, c0, c1, c2, c3) +#endif /* LEDS_PHYS */ + +#else + +void swarm_setup(void); + +#ifdef LEDS_PHYS +extern void setleds(char *str); +#else +#define setleds(s) do { } while (0) +#endif /* LEDS_PHYS */ + +#endif /* __ASSEMBLY__ */ + +#endif /* _SIBYTE_BOARD_H */ diff --git a/arch/mips/include/asm/sibyte/carmel.h b/arch/mips/include/asm/sibyte/carmel.h new file mode 100644 index 000000000000..11cad71323e8 --- /dev/null +++ b/arch/mips/include/asm/sibyte/carmel.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2002 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __ASM_SIBYTE_CARMEL_H +#define __ASM_SIBYTE_CARMEL_H + +#include +#include + +#define SIBYTE_BOARD_NAME "Carmel" + +#define GPIO_PHY_INTERRUPT 2 +#define GPIO_NONMASKABLE_INT 3 +#define GPIO_CF_INSERTED 6 +#define GPIO_MONTEREY_RESET 7 +#define GPIO_QUADUART_INT 8 +#define GPIO_CF_INT 9 +#define GPIO_FPGA_CCLK 10 +#define GPIO_FPGA_DOUT 11 +#define GPIO_FPGA_DIN 12 +#define GPIO_FPGA_PGM 13 +#define GPIO_FPGA_DONE 14 +#define GPIO_FPGA_INIT 15 + +#define LEDS_CS 2 +#define LEDS_PHYS 0x100C0000 +#define MLEDS_CS 3 +#define MLEDS_PHYS 0x100A0000 +#define UART_CS 4 +#define UART_PHYS 0x100D0000 +#define ARAVALI_CS 5 +#define ARAVALI_PHYS 0x11000000 +#define IDE_CS 6 +#define IDE_PHYS 0x100B0000 +#define ARAVALI2_CS 7 +#define ARAVALI2_PHYS 0x100E0000 + +#if defined(CONFIG_SIBYTE_CARMEL) +#define K_GPIO_GB_IDE 9 +#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) +#endif + + +#endif /* __ASM_SIBYTE_CARMEL_H */ diff --git a/arch/mips/include/asm/sibyte/sb1250.h b/arch/mips/include/asm/sibyte/sb1250.h new file mode 100644 index 000000000000..80c1a052662a --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250.h @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _ASM_SIBYTE_SB1250_H +#define _ASM_SIBYTE_SB1250_H + +/* + * yymmddpp: year, month, day, patch. + * should sync with Makefile EXTRAVERSION + */ +#define SIBYTE_RELEASE 0x02111403 + +#define SB1250_NR_IRQS 64 + +#define BCM1480_NR_IRQS 128 +#define BCM1480_NR_IRQS_HALF 64 + +#define SB1250_DUART_MINOR_BASE 64 + +#ifndef __ASSEMBLY__ + +#include + +/* For revision/pass information */ +#include +#include +extern unsigned int sb1_pass; +extern unsigned int soc_pass; +extern unsigned int soc_type; +extern unsigned int periph_rev; +extern unsigned int zbbus_mhz; + +extern void sb1250_time_init(void); +extern void sb1250_mask_irq(int cpu, int irq); +extern void sb1250_unmask_irq(int cpu, int irq); + +extern void bcm1480_time_init(void); +extern void bcm1480_mask_irq(int cpu, int irq); +extern void bcm1480_unmask_irq(int cpu, int irq); + +#define AT_spin \ + __asm__ __volatile__ ( \ + ".set noat\n" \ + "li $at, 0\n" \ + "1: beqz $at, 1b\n" \ + ".set at\n" \ + ) + +#endif + +#define IOADDR(a) ((void __iomem *)(IO_BASE + (a))) + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_defs.h b/arch/mips/include/asm/sibyte/sb1250_defs.h new file mode 100644 index 000000000000..09365f9111fa --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_defs.h @@ -0,0 +1,259 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * Global constants and macros File: sb1250_defs.h + * + * This file contains macros and definitions used by the other + * include files. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + +#ifndef _SB1250_DEFS_H +#define _SB1250_DEFS_H + +/* + * These headers require ANSI C89 string concatenation, and GCC or other + * 'long long' (64-bit integer) support. + */ +#if !defined(__STDC__) && !defined(_MSC_VER) +#error SiByte headers require ANSI C89 support +#endif + + +/* ********************************************************************* + * Macros for feature tests, used to enable include file features + * for chip features only present in certain chip revisions. + * + * SIBYTE_HDR_FEATURES may be defined to be the mask value chip/revision + * which is to be exposed by the headers. If undefined, it defaults to + * "all features." + * + * Use like: + * + * #define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_112x_PASS1 + * + * Generate defines only for that revision of chip. + * + * #if SIBYTE_HDR_FEATURE(chip,pass) + * + * True if header features for that revision or later of + * that particular chip type are enabled in SIBYTE_HDR_FEATURES. + * (Use this to bracket #defines for features present in a given + * revision and later.) + * + * Note that there is no implied ordering between chip types. + * + * Note also that 'chip' and 'pass' must textually exactly + * match the defines below. So, for example, + * SIBYTE_HDR_FEATURE(112x, PASS1) is OK, but + * SIBYTE_HDR_FEATURE(1120, pass1) is not (for two reasons). + * + * #if SIBYTE_HDR_FEATURE_UP_TO(chip,pass) + * + * Same as SIBYTE_HDR_FEATURE, but true for the named revision + * and earlier revisions of the named chip type. + * + * #if SIBYTE_HDR_FEATURE_EXACT(chip,pass) + * + * Same as SIBYTE_HDR_FEATURE, but only true for the named + * revision of the named chip type. (Note that this CANNOT + * be used to verify that you're compiling only for that + * particular chip/revision. It will be true any time this + * chip/revision is included in SIBYTE_HDR_FEATURES.) + * + * #if SIBYTE_HDR_FEATURE_CHIP(chip) + * + * True if header features for (any revision of) that chip type + * are enabled in SIBYTE_HDR_FEATURES. (Use this to bracket + * #defines for features specific to a given chip type.) + * + * Mask values currently include room for additional revisions of each + * chip type, but can be renumbered at will. Note that they MUST fit + * into 31 bits and may not include C type constructs, for safe use in + * CPP conditionals. Bit positions within chip types DO indicate + * ordering, so be careful when adding support for new minor revs. + ********************************************************************* */ + +#define SIBYTE_HDR_FMASK_1250_ALL 0x000000ff +#define SIBYTE_HDR_FMASK_1250_PASS1 0x00000001 +#define SIBYTE_HDR_FMASK_1250_PASS2 0x00000002 +#define SIBYTE_HDR_FMASK_1250_PASS3 0x00000004 + +#define SIBYTE_HDR_FMASK_112x_ALL 0x00000f00 +#define SIBYTE_HDR_FMASK_112x_PASS1 0x00000100 + +#define SIBYTE_HDR_FMASK_1480_ALL 0x0000f000 +#define SIBYTE_HDR_FMASK_1480_PASS1 0x00001000 +#define SIBYTE_HDR_FMASK_1480_PASS2 0x00002000 + +/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */ +#define SIBYTE_HDR_FMASK(chip, pass) \ + (SIBYTE_HDR_FMASK_ ## chip ## _ ## pass) +#define SIBYTE_HDR_FMASK_ALLREVS(chip) \ + (SIBYTE_HDR_FMASK_ ## chip ## _ALL) + +/* Default constant value for all chips, all revisions */ +#define SIBYTE_HDR_FMASK_ALL \ + (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \ + | SIBYTE_HDR_FMASK_1480_ALL) + +/* This one is used for the "original" BCM1250/BCM112x chips. We use this + to weed out constants and macros that do not exist on later chips like + the BCM1480 */ +#define SIBYTE_HDR_FMASK_1250_112x_ALL \ + (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL) +#define SIBYTE_HDR_FMASK_1250_112x SIBYTE_HDR_FMASK_1250_112x_ALL + +#ifndef SIBYTE_HDR_FEATURES +#define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_ALL +#endif + + +/* Bit mask for revisions of chip exclusively before the named revision. */ +#define SIBYTE_HDR_FMASK_BEFORE(chip, pass) \ + ((SIBYTE_HDR_FMASK(chip, pass) - 1) & SIBYTE_HDR_FMASK_ALLREVS(chip)) + +/* Bit mask for revisions of chip exclusively after the named revision. */ +#define SIBYTE_HDR_FMASK_AFTER(chip, pass) \ + (~(SIBYTE_HDR_FMASK(chip, pass) \ + | (SIBYTE_HDR_FMASK(chip, pass) - 1)) & SIBYTE_HDR_FMASK_ALLREVS(chip)) + + +/* True if header features enabled for (any revision of) that chip type. */ +#define SIBYTE_HDR_FEATURE_CHIP(chip) \ + (!! (SIBYTE_HDR_FMASK_ALLREVS(chip) & SIBYTE_HDR_FEATURES)) + +/* True for all versions of the BCM1250 and BCM1125, but not true for + anything else */ +#define SIBYTE_HDR_FEATURE_1250_112x \ + (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x)) +/* (!! (SIBYTE_HDR_FEATURES & SIBYHTE_HDR_FMASK_1250_112x)) */ + +/* True if header features enabled for that rev or later, inclusive. */ +#define SIBYTE_HDR_FEATURE(chip, pass) \ + (!! ((SIBYTE_HDR_FMASK(chip, pass) \ + | SIBYTE_HDR_FMASK_AFTER(chip, pass)) & SIBYTE_HDR_FEATURES)) + +/* True if header features enabled for exactly that rev. */ +#define SIBYTE_HDR_FEATURE_EXACT(chip, pass) \ + (!! (SIBYTE_HDR_FMASK(chip, pass) & SIBYTE_HDR_FEATURES)) + +/* True if header features enabled for that rev or before, inclusive. */ +#define SIBYTE_HDR_FEATURE_UP_TO(chip, pass) \ + (!! ((SIBYTE_HDR_FMASK(chip, pass) \ + | SIBYTE_HDR_FMASK_BEFORE(chip, pass)) & SIBYTE_HDR_FEATURES)) + + +/* ********************************************************************* + * Naming schemes for constants in these files: + * + * M_xxx MASK constant (identifies bits in a register). + * For multi-bit fields, all bits in the field will + * be set. + * + * K_xxx "Code" constant (value for data in a multi-bit + * field). The value is right justified. + * + * V_xxx "Value" constant. This is the same as the + * corresponding "K_xxx" constant, except it is + * shifted to the correct position in the register. + * + * S_xxx SHIFT constant. This is the number of bits that + * a field value (code) needs to be shifted + * (towards the left) to put the value in the right + * position for the register. + * + * A_xxx ADDRESS constant. This will be a physical + * address. Use the PHYS_TO_K1 macro to generate + * a K1SEG address. + * + * R_xxx RELATIVE offset constant. This is an offset from + * an A_xxx constant (usually the first register in + * a group). + * + * G_xxx(X) GET value. This macro obtains a multi-bit field + * from a register, masks it, and shifts it to + * the bottom of the register (retrieving a K_xxx + * value, for example). + * + * V_xxx(X) VALUE. This macro computes the value of a + * K_xxx constant shifted to the correct position + * in the register. + ********************************************************************* */ + + + + +/* + * Cast to 64-bit number. Presumably the syntax is different in + * assembly language. + * + * Note: you'll need to define uint32_t and uint64_t in your headers. + */ + +#if !defined(__ASSEMBLY__) +#define _SB_MAKE64(x) ((uint64_t)(x)) +#define _SB_MAKE32(x) ((uint32_t)(x)) +#else +#define _SB_MAKE64(x) (x) +#define _SB_MAKE32(x) (x) +#endif + + +/* + * Make a mask for 1 bit at position 'n' + */ + +#define _SB_MAKEMASK1(n) (_SB_MAKE64(1) << _SB_MAKE64(n)) +#define _SB_MAKEMASK1_32(n) (_SB_MAKE32(1) << _SB_MAKE32(n)) + +/* + * Make a mask for 'v' bits at position 'n' + */ + +#define _SB_MAKEMASK(v, n) (_SB_MAKE64((_SB_MAKE64(1)<<(v))-1) << _SB_MAKE64(n)) +#define _SB_MAKEMASK_32(v, n) (_SB_MAKE32((_SB_MAKE32(1)<<(v))-1) << _SB_MAKE32(n)) + +/* + * Make a value at 'v' at bit position 'n' + */ + +#define _SB_MAKEVALUE(v, n) (_SB_MAKE64(v) << _SB_MAKE64(n)) +#define _SB_MAKEVALUE_32(v, n) (_SB_MAKE32(v) << _SB_MAKE32(n)) + +#define _SB_GETVALUE(v, n, m) ((_SB_MAKE64(v) & _SB_MAKE64(m)) >> _SB_MAKE64(n)) +#define _SB_GETVALUE_32(v, n, m) ((_SB_MAKE32(v) & _SB_MAKE32(m)) >> _SB_MAKE32(n)) + +/* + * Macros to read/write on-chip registers + * XXX should we do the PHYS_TO_K1 here? + */ + + +#if defined(__mips64) && !defined(__ASSEMBLY__) +#define SBWRITECSR(csr, val) *((volatile uint64_t *) PHYS_TO_K1(csr)) = (val) +#define SBREADCSR(csr) (*((volatile uint64_t *) PHYS_TO_K1(csr))) +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_dma.h b/arch/mips/include/asm/sibyte/sb1250_dma.h new file mode 100644 index 000000000000..bad56171d747 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_dma.h @@ -0,0 +1,594 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * DMA definitions File: sb1250_dma.h + * + * This module contains constants and macros useful for + * programming the SB1250's DMA controllers, both the data mover + * and the Ethernet DMA. + * + * SB1250 specification level: User's manual 10/21/02 + * BCM1280 specification level: User's manual 11/24/03 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_DMA_H +#define _SB1250_DMA_H + + +#include "sb1250_defs.h" + +/* ********************************************************************* + * DMA Registers + ********************************************************************* */ + +/* + * Ethernet and Serial DMA Configuration Register 0 (Table 7-4) + * Registers: DMA_CONFIG0_MAC_x_RX_CH_0 + * Registers: DMA_CONFIG0_MAC_x_TX_CH_0 + * Registers: DMA_CONFIG0_SER_x_RX + * Registers: DMA_CONFIG0_SER_x_TX + */ + + +#define M_DMA_DROP _SB_MAKEMASK1(0) + +#define M_DMA_CHAIN_SEL _SB_MAKEMASK1(1) +#define M_DMA_RESERVED1 _SB_MAKEMASK1(2) + +#define S_DMA_DESC_TYPE _SB_MAKE64(1) +#define M_DMA_DESC_TYPE _SB_MAKEMASK(2, S_DMA_DESC_TYPE) +#define V_DMA_DESC_TYPE(x) _SB_MAKEVALUE(x, S_DMA_DESC_TYPE) +#define G_DMA_DESC_TYPE(x) _SB_GETVALUE(x, S_DMA_DESC_TYPE, M_DMA_DESC_TYPE) + +#define K_DMA_DESC_TYPE_RING_AL 0 +#define K_DMA_DESC_TYPE_CHAIN_AL 1 + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define K_DMA_DESC_TYPE_RING_UAL_WI 2 +#define K_DMA_DESC_TYPE_RING_UAL_RMW 3 +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define M_DMA_EOP_INT_EN _SB_MAKEMASK1(3) +#define M_DMA_HWM_INT_EN _SB_MAKEMASK1(4) +#define M_DMA_LWM_INT_EN _SB_MAKEMASK1(5) +#define M_DMA_TBX_EN _SB_MAKEMASK1(6) +#define M_DMA_TDX_EN _SB_MAKEMASK1(7) + +#define S_DMA_INT_PKTCNT _SB_MAKE64(8) +#define M_DMA_INT_PKTCNT _SB_MAKEMASK(8, S_DMA_INT_PKTCNT) +#define V_DMA_INT_PKTCNT(x) _SB_MAKEVALUE(x, S_DMA_INT_PKTCNT) +#define G_DMA_INT_PKTCNT(x) _SB_GETVALUE(x, S_DMA_INT_PKTCNT, M_DMA_INT_PKTCNT) + +#define S_DMA_RINGSZ _SB_MAKE64(16) +#define M_DMA_RINGSZ _SB_MAKEMASK(16, S_DMA_RINGSZ) +#define V_DMA_RINGSZ(x) _SB_MAKEVALUE(x, S_DMA_RINGSZ) +#define G_DMA_RINGSZ(x) _SB_GETVALUE(x, S_DMA_RINGSZ, M_DMA_RINGSZ) + +#define S_DMA_HIGH_WATERMARK _SB_MAKE64(32) +#define M_DMA_HIGH_WATERMARK _SB_MAKEMASK(16, S_DMA_HIGH_WATERMARK) +#define V_DMA_HIGH_WATERMARK(x) _SB_MAKEVALUE(x, S_DMA_HIGH_WATERMARK) +#define G_DMA_HIGH_WATERMARK(x) _SB_GETVALUE(x, S_DMA_HIGH_WATERMARK, M_DMA_HIGH_WATERMARK) + +#define S_DMA_LOW_WATERMARK _SB_MAKE64(48) +#define M_DMA_LOW_WATERMARK _SB_MAKEMASK(16, S_DMA_LOW_WATERMARK) +#define V_DMA_LOW_WATERMARK(x) _SB_MAKEVALUE(x, S_DMA_LOW_WATERMARK) +#define G_DMA_LOW_WATERMARK(x) _SB_GETVALUE(x, S_DMA_LOW_WATERMARK, M_DMA_LOW_WATERMARK) + +/* + * Ethernet and Serial DMA Configuration Register 1 (Table 7-5) + * Registers: DMA_CONFIG1_MAC_x_RX_CH_0 + * Registers: DMA_CONFIG1_DMA_x_TX_CH_0 + * Registers: DMA_CONFIG1_SER_x_RX + * Registers: DMA_CONFIG1_SER_x_TX + */ + +#define M_DMA_HDR_CF_EN _SB_MAKEMASK1(0) +#define M_DMA_ASIC_XFR_EN _SB_MAKEMASK1(1) +#define M_DMA_PRE_ADDR_EN _SB_MAKEMASK1(2) +#define M_DMA_FLOW_CTL_EN _SB_MAKEMASK1(3) +#define M_DMA_NO_DSCR_UPDT _SB_MAKEMASK1(4) +#define M_DMA_L2CA _SB_MAKEMASK1(5) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_DMA_RX_XTRA_STATUS _SB_MAKEMASK1(6) +#define M_DMA_TX_CPU_PAUSE _SB_MAKEMASK1(6) +#define M_DMA_TX_FC_PAUSE_EN _SB_MAKEMASK1(7) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define M_DMA_MBZ1 _SB_MAKEMASK(6, 15) + +#define S_DMA_HDR_SIZE _SB_MAKE64(21) +#define M_DMA_HDR_SIZE _SB_MAKEMASK(9, S_DMA_HDR_SIZE) +#define V_DMA_HDR_SIZE(x) _SB_MAKEVALUE(x, S_DMA_HDR_SIZE) +#define G_DMA_HDR_SIZE(x) _SB_GETVALUE(x, S_DMA_HDR_SIZE, M_DMA_HDR_SIZE) + +#define M_DMA_MBZ2 _SB_MAKEMASK(5, 32) + +#define S_DMA_ASICXFR_SIZE _SB_MAKE64(37) +#define M_DMA_ASICXFR_SIZE _SB_MAKEMASK(9, S_DMA_ASICXFR_SIZE) +#define V_DMA_ASICXFR_SIZE(x) _SB_MAKEVALUE(x, S_DMA_ASICXFR_SIZE) +#define G_DMA_ASICXFR_SIZE(x) _SB_GETVALUE(x, S_DMA_ASICXFR_SIZE, M_DMA_ASICXFR_SIZE) + +#define S_DMA_INT_TIMEOUT _SB_MAKE64(48) +#define M_DMA_INT_TIMEOUT _SB_MAKEMASK(16, S_DMA_INT_TIMEOUT) +#define V_DMA_INT_TIMEOUT(x) _SB_MAKEVALUE(x, S_DMA_INT_TIMEOUT) +#define G_DMA_INT_TIMEOUT(x) _SB_GETVALUE(x, S_DMA_INT_TIMEOUT, M_DMA_INT_TIMEOUT) + +/* + * Ethernet and Serial DMA Descriptor base address (Table 7-6) + */ + +#define M_DMA_DSCRBASE_MBZ _SB_MAKEMASK(4, 0) + + +/* + * ASIC Mode Base Address (Table 7-7) + */ + +#define M_DMA_ASIC_BASE_MBZ _SB_MAKEMASK(20, 0) + +/* + * DMA Descriptor Count Registers (Table 7-8) + */ + +/* No bitfields */ + + +/* + * Current Descriptor Address Register (Table 7-11) + */ + +#define S_DMA_CURDSCR_ADDR _SB_MAKE64(0) +#define M_DMA_CURDSCR_ADDR _SB_MAKEMASK(40, S_DMA_CURDSCR_ADDR) +#define S_DMA_CURDSCR_COUNT _SB_MAKE64(40) +#define M_DMA_CURDSCR_COUNT _SB_MAKEMASK(16, S_DMA_CURDSCR_COUNT) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_DMA_TX_CH_PAUSE_ON _SB_MAKEMASK1(56) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +/* + * Receive Packet Drop Registers + */ +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_DMA_OODLOST_RX _SB_MAKE64(0) +#define M_DMA_OODLOST_RX _SB_MAKEMASK(16, S_DMA_OODLOST_RX) +#define G_DMA_OODLOST_RX(x) _SB_GETVALUE(x, S_DMA_OODLOST_RX, M_DMA_OODLOST_RX) + +#define S_DMA_EOP_COUNT_RX _SB_MAKE64(16) +#define M_DMA_EOP_COUNT_RX _SB_MAKEMASK(8, S_DMA_EOP_COUNT_RX) +#define G_DMA_EOP_COUNT_RX(x) _SB_GETVALUE(x, S_DMA_EOP_COUNT_RX, M_DMA_EOP_COUNT_RX) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +/* ********************************************************************* + * DMA Descriptors + ********************************************************************* */ + +/* + * Descriptor doubleword "A" (Table 7-12) + */ + +#define S_DMA_DSCRA_OFFSET _SB_MAKE64(0) +#define M_DMA_DSCRA_OFFSET _SB_MAKEMASK(5, S_DMA_DSCRA_OFFSET) +#define V_DMA_DSCRA_OFFSET(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_OFFSET) +#define G_DMA_DSCRA_OFFSET(x) _SB_GETVALUE(x, S_DMA_DSCRA_OFFSET, M_DMA_DSCRA_OFFSET) + +/* Note: Don't shift the address over, just mask it with the mask below */ +#define S_DMA_DSCRA_A_ADDR _SB_MAKE64(5) +#define M_DMA_DSCRA_A_ADDR _SB_MAKEMASK(35, S_DMA_DSCRA_A_ADDR) + +#define M_DMA_DSCRA_A_ADDR_OFFSET (M_DMA_DSCRA_OFFSET | M_DMA_DSCRA_A_ADDR) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_DMA_DSCRA_A_ADDR_UA _SB_MAKE64(0) +#define M_DMA_DSCRA_A_ADDR_UA _SB_MAKEMASK(40, S_DMA_DSCRA_A_ADDR_UA) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define S_DMA_DSCRA_A_SIZE _SB_MAKE64(40) +#define M_DMA_DSCRA_A_SIZE _SB_MAKEMASK(9, S_DMA_DSCRA_A_SIZE) +#define V_DMA_DSCRA_A_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_A_SIZE) +#define G_DMA_DSCRA_A_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRA_A_SIZE, M_DMA_DSCRA_A_SIZE) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_DMA_DSCRA_DSCR_CNT _SB_MAKE64(40) +#define M_DMA_DSCRA_DSCR_CNT _SB_MAKEMASK(8, S_DMA_DSCRA_DSCR_CNT) +#define G_DMA_DSCRA_DSCR_CNT(x) _SB_GETVALUE(x, S_DMA_DSCRA_DSCR_CNT, M_DMA_DSCRA_DSCR_CNT) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define M_DMA_DSCRA_INTERRUPT _SB_MAKEMASK1(49) +#define M_DMA_DSCRA_OFFSETB _SB_MAKEMASK1(50) + +#define S_DMA_DSCRA_STATUS _SB_MAKE64(51) +#define M_DMA_DSCRA_STATUS _SB_MAKEMASK(13, S_DMA_DSCRA_STATUS) +#define V_DMA_DSCRA_STATUS(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_STATUS) +#define G_DMA_DSCRA_STATUS(x) _SB_GETVALUE(x, S_DMA_DSCRA_STATUS, M_DMA_DSCRA_STATUS) + +/* + * Descriptor doubleword "B" (Table 7-13) + */ + + +#define S_DMA_DSCRB_OPTIONS _SB_MAKE64(0) +#define M_DMA_DSCRB_OPTIONS _SB_MAKEMASK(4, S_DMA_DSCRB_OPTIONS) +#define V_DMA_DSCRB_OPTIONS(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_OPTIONS) +#define G_DMA_DSCRB_OPTIONS(x) _SB_GETVALUE(x, S_DMA_DSCRB_OPTIONS, M_DMA_DSCRB_OPTIONS) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_DMA_DSCRB_A_SIZE _SB_MAKE64(8) +#define M_DMA_DSCRB_A_SIZE _SB_MAKEMASK(14, S_DMA_DSCRB_A_SIZE) +#define V_DMA_DSCRB_A_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_A_SIZE) +#define G_DMA_DSCRB_A_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_A_SIZE, M_DMA_DSCRB_A_SIZE) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define R_DMA_DSCRB_ADDR _SB_MAKE64(0x10) + +/* Note: Don't shift the address over, just mask it with the mask below */ +#define S_DMA_DSCRB_B_ADDR _SB_MAKE64(5) +#define M_DMA_DSCRB_B_ADDR _SB_MAKEMASK(35, S_DMA_DSCRB_B_ADDR) + +#define S_DMA_DSCRB_B_SIZE _SB_MAKE64(40) +#define M_DMA_DSCRB_B_SIZE _SB_MAKEMASK(9, S_DMA_DSCRB_B_SIZE) +#define V_DMA_DSCRB_B_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_B_SIZE) +#define G_DMA_DSCRB_B_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_B_SIZE, M_DMA_DSCRB_B_SIZE) + +#define M_DMA_DSCRB_B_VALID _SB_MAKEMASK1(49) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKE64(48) +#define M_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKEMASK(2, S_DMA_DSCRB_PKT_SIZE_MSB) +#define V_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB) +#define G_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB, M_DMA_DSCRB_PKT_SIZE_MSB) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define S_DMA_DSCRB_PKT_SIZE _SB_MAKE64(50) +#define M_DMA_DSCRB_PKT_SIZE _SB_MAKEMASK(14, S_DMA_DSCRB_PKT_SIZE) +#define V_DMA_DSCRB_PKT_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE) +#define G_DMA_DSCRB_PKT_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE, M_DMA_DSCRB_PKT_SIZE) + +/* + * from pass2 some bits in dscr_b are also used for rx status + */ +#define S_DMA_DSCRB_STATUS _SB_MAKE64(0) +#define M_DMA_DSCRB_STATUS _SB_MAKEMASK(1, S_DMA_DSCRB_STATUS) +#define V_DMA_DSCRB_STATUS(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_STATUS) +#define G_DMA_DSCRB_STATUS(x) _SB_GETVALUE(x, S_DMA_DSCRB_STATUS, M_DMA_DSCRB_STATUS) + +/* + * Ethernet Descriptor Status Bits (Table 7-15) + */ + +#define M_DMA_ETHRX_BADIP4CS _SB_MAKEMASK1(51) +#define M_DMA_ETHRX_DSCRERR _SB_MAKEMASK1(52) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +/* Note: This bit is in the DSCR_B options field */ +#define M_DMA_ETHRX_BADTCPCS _SB_MAKEMASK1(0) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +/* Note: These bits are in the DSCR_B options field */ +#define M_DMA_ETH_VLAN_FLAG _SB_MAKEMASK1(1) +#define M_DMA_ETH_CRC_FLAG _SB_MAKEMASK1(2) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define S_DMA_ETHRX_RXCH 53 +#define M_DMA_ETHRX_RXCH _SB_MAKEMASK(2, S_DMA_ETHRX_RXCH) +#define V_DMA_ETHRX_RXCH(x) _SB_MAKEVALUE(x, S_DMA_ETHRX_RXCH) +#define G_DMA_ETHRX_RXCH(x) _SB_GETVALUE(x, S_DMA_ETHRX_RXCH, M_DMA_ETHRX_RXCH) + +#define S_DMA_ETHRX_PKTTYPE 55 +#define M_DMA_ETHRX_PKTTYPE _SB_MAKEMASK(3, S_DMA_ETHRX_PKTTYPE) +#define V_DMA_ETHRX_PKTTYPE(x) _SB_MAKEVALUE(x, S_DMA_ETHRX_PKTTYPE) +#define G_DMA_ETHRX_PKTTYPE(x) _SB_GETVALUE(x, S_DMA_ETHRX_PKTTYPE, M_DMA_ETHRX_PKTTYPE) + +#define K_DMA_ETHRX_PKTTYPE_IPV4 0 +#define K_DMA_ETHRX_PKTTYPE_ARPV4 1 +#define K_DMA_ETHRX_PKTTYPE_802 2 +#define K_DMA_ETHRX_PKTTYPE_OTHER 3 +#define K_DMA_ETHRX_PKTTYPE_USER0 4 +#define K_DMA_ETHRX_PKTTYPE_USER1 5 +#define K_DMA_ETHRX_PKTTYPE_USER2 6 +#define K_DMA_ETHRX_PKTTYPE_USER3 7 + +#define M_DMA_ETHRX_MATCH_HASH _SB_MAKEMASK1(58) +#define M_DMA_ETHRX_MATCH_EXACT _SB_MAKEMASK1(59) +#define M_DMA_ETHRX_BCAST _SB_MAKEMASK1(60) +#define M_DMA_ETHRX_MCAST _SB_MAKEMASK1(61) +#define M_DMA_ETHRX_BAD _SB_MAKEMASK1(62) +#define M_DMA_ETHRX_SOP _SB_MAKEMASK1(63) + +/* + * Ethernet Transmit Status Bits (Table 7-16) + */ + +#define M_DMA_ETHTX_SOP _SB_MAKEMASK1(63) + +/* + * Ethernet Transmit Options (Table 7-17) + */ + +#define K_DMA_ETHTX_NOTSOP _SB_MAKE64(0x00) +#define K_DMA_ETHTX_APPENDCRC _SB_MAKE64(0x01) +#define K_DMA_ETHTX_REPLACECRC _SB_MAKE64(0x02) +#define K_DMA_ETHTX_APPENDCRC_APPENDPAD _SB_MAKE64(0x03) +#define K_DMA_ETHTX_APPENDVLAN_REPLACECRC _SB_MAKE64(0x04) +#define K_DMA_ETHTX_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x05) +#define K_DMA_ETHTX_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x6) +#define K_DMA_ETHTX_NOMODS _SB_MAKE64(0x07) +#define K_DMA_ETHTX_RESERVED1 _SB_MAKE64(0x08) +#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC _SB_MAKE64(0x09) +#define K_DMA_ETHTX_REPLACESADDR_REPLACECRC _SB_MAKE64(0x0A) +#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC_APPENDPAD _SB_MAKE64(0x0B) +#define K_DMA_ETHTX_REPLACESADDR_APPENDVLAN_REPLACECRC _SB_MAKE64(0x0C) +#define K_DMA_ETHTX_REPLACESADDR_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x0D) +#define K_DMA_ETHTX_REPLACESADDR_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x0E) +#define K_DMA_ETHTX_RESERVED2 _SB_MAKE64(0x0F) + +/* + * Serial Receive Options (Table 7-18) + */ +#define M_DMA_SERRX_CRC_ERROR _SB_MAKEMASK1(56) +#define M_DMA_SERRX_ABORT _SB_MAKEMASK1(57) +#define M_DMA_SERRX_OCTET_ERROR _SB_MAKEMASK1(58) +#define M_DMA_SERRX_LONGFRAME_ERROR _SB_MAKEMASK1(59) +#define M_DMA_SERRX_SHORTFRAME_ERROR _SB_MAKEMASK1(60) +#define M_DMA_SERRX_OVERRUN_ERROR _SB_MAKEMASK1(61) +#define M_DMA_SERRX_GOOD _SB_MAKEMASK1(62) +#define M_DMA_SERRX_SOP _SB_MAKEMASK1(63) + +/* + * Serial Transmit Status Bits (Table 7-20) + */ + +#define M_DMA_SERTX_FLAG _SB_MAKEMASK1(63) + +/* + * Serial Transmit Options (Table 7-21) + */ + +#define K_DMA_SERTX_RESERVED _SB_MAKEMASK1(0) +#define K_DMA_SERTX_APPENDCRC _SB_MAKEMASK1(1) +#define K_DMA_SERTX_APPENDPAD _SB_MAKEMASK1(2) +#define K_DMA_SERTX_ABORT _SB_MAKEMASK1(3) + + +/* ********************************************************************* + * Data Mover Registers + ********************************************************************* */ + +/* + * Data Mover Descriptor Base Address Register (Table 7-22) + * Register: DM_DSCR_BASE_0 + * Register: DM_DSCR_BASE_1 + * Register: DM_DSCR_BASE_2 + * Register: DM_DSCR_BASE_3 + */ + +#define M_DM_DSCR_BASE_MBZ _SB_MAKEMASK(4, 0) + +/* Note: Just mask the base address and then OR it in. */ +#define S_DM_DSCR_BASE_ADDR _SB_MAKE64(4) +#define M_DM_DSCR_BASE_ADDR _SB_MAKEMASK(36, S_DM_DSCR_BASE_ADDR) + +#define S_DM_DSCR_BASE_RINGSZ _SB_MAKE64(40) +#define M_DM_DSCR_BASE_RINGSZ _SB_MAKEMASK(16, S_DM_DSCR_BASE_RINGSZ) +#define V_DM_DSCR_BASE_RINGSZ(x) _SB_MAKEVALUE(x, S_DM_DSCR_BASE_RINGSZ) +#define G_DM_DSCR_BASE_RINGSZ(x) _SB_GETVALUE(x, S_DM_DSCR_BASE_RINGSZ, M_DM_DSCR_BASE_RINGSZ) + +#define S_DM_DSCR_BASE_PRIORITY _SB_MAKE64(56) +#define M_DM_DSCR_BASE_PRIORITY _SB_MAKEMASK(3, S_DM_DSCR_BASE_PRIORITY) +#define V_DM_DSCR_BASE_PRIORITY(x) _SB_MAKEVALUE(x, S_DM_DSCR_BASE_PRIORITY) +#define G_DM_DSCR_BASE_PRIORITY(x) _SB_GETVALUE(x, S_DM_DSCR_BASE_PRIORITY, M_DM_DSCR_BASE_PRIORITY) + +#define K_DM_DSCR_BASE_PRIORITY_1 0 +#define K_DM_DSCR_BASE_PRIORITY_2 1 +#define K_DM_DSCR_BASE_PRIORITY_4 2 +#define K_DM_DSCR_BASE_PRIORITY_8 3 +#define K_DM_DSCR_BASE_PRIORITY_16 4 + +#define M_DM_DSCR_BASE_ACTIVE _SB_MAKEMASK1(59) +#define M_DM_DSCR_BASE_INTERRUPT _SB_MAKEMASK1(60) +#define M_DM_DSCR_BASE_RESET _SB_MAKEMASK1(61) /* write register */ +#define M_DM_DSCR_BASE_ERROR _SB_MAKEMASK1(61) /* read register */ +#define M_DM_DSCR_BASE_ABORT _SB_MAKEMASK1(62) +#define M_DM_DSCR_BASE_ENABL _SB_MAKEMASK1(63) + +/* + * Data Mover Descriptor Count Register (Table 7-25) + */ + +/* no bitfields */ + +/* + * Data Mover Current Descriptor Address (Table 7-24) + * Register: DM_CUR_DSCR_ADDR_0 + * Register: DM_CUR_DSCR_ADDR_1 + * Register: DM_CUR_DSCR_ADDR_2 + * Register: DM_CUR_DSCR_ADDR_3 + */ + +#define S_DM_CUR_DSCR_DSCR_ADDR _SB_MAKE64(0) +#define M_DM_CUR_DSCR_DSCR_ADDR _SB_MAKEMASK(40, S_DM_CUR_DSCR_DSCR_ADDR) + +#define S_DM_CUR_DSCR_DSCR_COUNT _SB_MAKE64(48) +#define M_DM_CUR_DSCR_DSCR_COUNT _SB_MAKEMASK(16, S_DM_CUR_DSCR_DSCR_COUNT) +#define V_DM_CUR_DSCR_DSCR_COUNT(r) _SB_MAKEVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT) +#define G_DM_CUR_DSCR_DSCR_COUNT(r) _SB_GETVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT,\ + M_DM_CUR_DSCR_DSCR_COUNT) + + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +/* + * Data Mover Channel Partial Result Registers + * Register: DM_PARTIAL_0 + * Register: DM_PARTIAL_1 + * Register: DM_PARTIAL_2 + * Register: DM_PARTIAL_3 + */ +#define S_DM_PARTIAL_CRC_PARTIAL _SB_MAKE64(0) +#define M_DM_PARTIAL_CRC_PARTIAL _SB_MAKEMASK(32, S_DM_PARTIAL_CRC_PARTIAL) +#define V_DM_PARTIAL_CRC_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_CRC_PARTIAL) +#define G_DM_PARTIAL_CRC_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_CRC_PARTIAL,\ + M_DM_PARTIAL_CRC_PARTIAL) + +#define S_DM_PARTIAL_TCPCS_PARTIAL _SB_MAKE64(32) +#define M_DM_PARTIAL_TCPCS_PARTIAL _SB_MAKEMASK(16, S_DM_PARTIAL_TCPCS_PARTIAL) +#define V_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL) +#define G_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL,\ + M_DM_PARTIAL_TCPCS_PARTIAL) + +#define M_DM_PARTIAL_ODD_BYTE _SB_MAKEMASK1(48) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +/* + * Data Mover CRC Definition Registers + * Register: CRC_DEF_0 + * Register: CRC_DEF_1 + */ +#define S_CRC_DEF_CRC_INIT _SB_MAKE64(0) +#define M_CRC_DEF_CRC_INIT _SB_MAKEMASK(32, S_CRC_DEF_CRC_INIT) +#define V_CRC_DEF_CRC_INIT(r) _SB_MAKEVALUE(r, S_CRC_DEF_CRC_INIT) +#define G_CRC_DEF_CRC_INIT(r) _SB_GETVALUE(r, S_CRC_DEF_CRC_INIT,\ + M_CRC_DEF_CRC_INIT) + +#define S_CRC_DEF_CRC_POLY _SB_MAKE64(32) +#define M_CRC_DEF_CRC_POLY _SB_MAKEMASK(32, S_CRC_DEF_CRC_POLY) +#define V_CRC_DEF_CRC_POLY(r) _SB_MAKEVALUE(r, S_CRC_DEF_CRC_POLY) +#define G_CRC_DEF_CRC_POLY(r) _SB_GETVALUE(r, S_CRC_DEF_CRC_POLY,\ + M_CRC_DEF_CRC_POLY) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +/* + * Data Mover CRC/Checksum Definition Registers + * Register: CTCP_DEF_0 + * Register: CTCP_DEF_1 + */ +#define S_CTCP_DEF_CRC_TXOR _SB_MAKE64(0) +#define M_CTCP_DEF_CRC_TXOR _SB_MAKEMASK(32, S_CTCP_DEF_CRC_TXOR) +#define V_CTCP_DEF_CRC_TXOR(r) _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_TXOR) +#define G_CTCP_DEF_CRC_TXOR(r) _SB_GETVALUE(r, S_CTCP_DEF_CRC_TXOR,\ + M_CTCP_DEF_CRC_TXOR) + +#define S_CTCP_DEF_TCPCS_INIT _SB_MAKE64(32) +#define M_CTCP_DEF_TCPCS_INIT _SB_MAKEMASK(16, S_CTCP_DEF_TCPCS_INIT) +#define V_CTCP_DEF_TCPCS_INIT(r) _SB_MAKEVALUE(r, S_CTCP_DEF_TCPCS_INIT) +#define G_CTCP_DEF_TCPCS_INIT(r) _SB_GETVALUE(r, S_CTCP_DEF_TCPCS_INIT,\ + M_CTCP_DEF_TCPCS_INIT) + +#define S_CTCP_DEF_CRC_WIDTH _SB_MAKE64(48) +#define M_CTCP_DEF_CRC_WIDTH _SB_MAKEMASK(2, S_CTCP_DEF_CRC_WIDTH) +#define V_CTCP_DEF_CRC_WIDTH(r) _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_WIDTH) +#define G_CTCP_DEF_CRC_WIDTH(r) _SB_GETVALUE(r, S_CTCP_DEF_CRC_WIDTH,\ + M_CTCP_DEF_CRC_WIDTH) + +#define K_CTCP_DEF_CRC_WIDTH_4 0 +#define K_CTCP_DEF_CRC_WIDTH_2 1 +#define K_CTCP_DEF_CRC_WIDTH_1 2 + +#define M_CTCP_DEF_CRC_BIT_ORDER _SB_MAKEMASK1(50) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + + +/* + * Data Mover Descriptor Doubleword "A" (Table 7-26) + */ + +#define S_DM_DSCRA_DST_ADDR _SB_MAKE64(0) +#define M_DM_DSCRA_DST_ADDR _SB_MAKEMASK(40, S_DM_DSCRA_DST_ADDR) + +#define M_DM_DSCRA_UN_DEST _SB_MAKEMASK1(40) +#define M_DM_DSCRA_UN_SRC _SB_MAKEMASK1(41) +#define M_DM_DSCRA_INTERRUPT _SB_MAKEMASK1(42) +#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) +#define M_DM_DSCRA_THROTTLE _SB_MAKEMASK1(43) +#endif /* up to 1250 PASS1 */ + +#define S_DM_DSCRA_DIR_DEST _SB_MAKE64(44) +#define M_DM_DSCRA_DIR_DEST _SB_MAKEMASK(2, S_DM_DSCRA_DIR_DEST) +#define V_DM_DSCRA_DIR_DEST(x) _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_DEST) +#define G_DM_DSCRA_DIR_DEST(x) _SB_GETVALUE(x, S_DM_DSCRA_DIR_DEST, M_DM_DSCRA_DIR_DEST) + +#define K_DM_DSCRA_DIR_DEST_INCR 0 +#define K_DM_DSCRA_DIR_DEST_DECR 1 +#define K_DM_DSCRA_DIR_DEST_CONST 2 + +#define V_DM_DSCRA_DIR_DEST_INCR _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_INCR, S_DM_DSCRA_DIR_DEST) +#define V_DM_DSCRA_DIR_DEST_DECR _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_DECR, S_DM_DSCRA_DIR_DEST) +#define V_DM_DSCRA_DIR_DEST_CONST _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_CONST, S_DM_DSCRA_DIR_DEST) + +#define S_DM_DSCRA_DIR_SRC _SB_MAKE64(46) +#define M_DM_DSCRA_DIR_SRC _SB_MAKEMASK(2, S_DM_DSCRA_DIR_SRC) +#define V_DM_DSCRA_DIR_SRC(x) _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_SRC) +#define G_DM_DSCRA_DIR_SRC(x) _SB_GETVALUE(x, S_DM_DSCRA_DIR_SRC, M_DM_DSCRA_DIR_SRC) + +#define K_DM_DSCRA_DIR_SRC_INCR 0 +#define K_DM_DSCRA_DIR_SRC_DECR 1 +#define K_DM_DSCRA_DIR_SRC_CONST 2 + +#define V_DM_DSCRA_DIR_SRC_INCR _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_INCR, S_DM_DSCRA_DIR_SRC) +#define V_DM_DSCRA_DIR_SRC_DECR _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_DECR, S_DM_DSCRA_DIR_SRC) +#define V_DM_DSCRA_DIR_SRC_CONST _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_CONST, S_DM_DSCRA_DIR_SRC) + + +#define M_DM_DSCRA_ZERO_MEM _SB_MAKEMASK1(48) +#define M_DM_DSCRA_PREFETCH _SB_MAKEMASK1(49) +#define M_DM_DSCRA_L2C_DEST _SB_MAKEMASK1(50) +#define M_DM_DSCRA_L2C_SRC _SB_MAKEMASK1(51) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_DM_DSCRA_RD_BKOFF _SB_MAKEMASK1(52) +#define M_DM_DSCRA_WR_BKOFF _SB_MAKEMASK1(53) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_DM_DSCRA_TCPCS_EN _SB_MAKEMASK1(54) +#define M_DM_DSCRA_TCPCS_RES _SB_MAKEMASK1(55) +#define M_DM_DSCRA_TCPCS_AP _SB_MAKEMASK1(56) +#define M_DM_DSCRA_CRC_EN _SB_MAKEMASK1(57) +#define M_DM_DSCRA_CRC_RES _SB_MAKEMASK1(58) +#define M_DM_DSCRA_CRC_AP _SB_MAKEMASK1(59) +#define M_DM_DSCRA_CRC_DFN _SB_MAKEMASK1(60) +#define M_DM_DSCRA_CRC_XBIT _SB_MAKEMASK1(61) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define M_DM_DSCRA_RESERVED2 _SB_MAKEMASK(3, 61) + +/* + * Data Mover Descriptor Doubleword "B" (Table 7-25) + */ + +#define S_DM_DSCRB_SRC_ADDR _SB_MAKE64(0) +#define M_DM_DSCRB_SRC_ADDR _SB_MAKEMASK(40, S_DM_DSCRB_SRC_ADDR) + +#define S_DM_DSCRB_SRC_LENGTH _SB_MAKE64(40) +#define M_DM_DSCRB_SRC_LENGTH _SB_MAKEMASK(20, S_DM_DSCRB_SRC_LENGTH) +#define V_DM_DSCRB_SRC_LENGTH(x) _SB_MAKEVALUE(x, S_DM_DSCRB_SRC_LENGTH) +#define G_DM_DSCRB_SRC_LENGTH(x) _SB_GETVALUE(x, S_DM_DSCRB_SRC_LENGTH, M_DM_DSCRB_SRC_LENGTH) + + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_genbus.h b/arch/mips/include/asm/sibyte/sb1250_genbus.h new file mode 100644 index 000000000000..94e9c7c8e783 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_genbus.h @@ -0,0 +1,474 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * Generic Bus Constants File: sb1250_genbus.h + * + * This module contains constants and macros useful for + * manipulating the SB1250's Generic Bus interface + * + * SB1250 specification level: User's manual 10/21/02 + * BCM1280 specification level: User's Manual 11/14/03 + * + ********************************************************************* + * + * Copyright 2000, 2001, 2002, 2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_GENBUS_H +#define _SB1250_GENBUS_H + +#include "sb1250_defs.h" + +/* + * Generic Bus Region Configuration Registers (Table 11-4) + */ + +#define S_IO_RDY_ACTIVE 0 +#define M_IO_RDY_ACTIVE _SB_MAKEMASK1(S_IO_RDY_ACTIVE) + +#define S_IO_ENA_RDY 1 +#define M_IO_ENA_RDY _SB_MAKEMASK1(S_IO_ENA_RDY) + +#define S_IO_WIDTH_SEL 2 +#define M_IO_WIDTH_SEL _SB_MAKEMASK(2, S_IO_WIDTH_SEL) +#define K_IO_WIDTH_SEL_1 0 +#define K_IO_WIDTH_SEL_2 1 +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ + || SIBYTE_HDR_FEATURE_CHIP(1480) +#define K_IO_WIDTH_SEL_1L 2 +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ +#define K_IO_WIDTH_SEL_4 3 +#define V_IO_WIDTH_SEL(x) _SB_MAKEVALUE(x, S_IO_WIDTH_SEL) +#define G_IO_WIDTH_SEL(x) _SB_GETVALUE(x, S_IO_WIDTH_SEL, M_IO_WIDTH_SEL) + +#define S_IO_PARITY_ENA 4 +#define M_IO_PARITY_ENA _SB_MAKEMASK1(S_IO_PARITY_ENA) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ + || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_IO_BURST_EN 5 +#define M_IO_BURST_EN _SB_MAKEMASK1(S_IO_BURST_EN) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ +#define S_IO_PARITY_ODD 6 +#define M_IO_PARITY_ODD _SB_MAKEMASK1(S_IO_PARITY_ODD) +#define S_IO_NONMUX 7 +#define M_IO_NONMUX _SB_MAKEMASK1(S_IO_NONMUX) + +#define S_IO_TIMEOUT 8 +#define M_IO_TIMEOUT _SB_MAKEMASK(8, S_IO_TIMEOUT) +#define V_IO_TIMEOUT(x) _SB_MAKEVALUE(x, S_IO_TIMEOUT) +#define G_IO_TIMEOUT(x) _SB_GETVALUE(x, S_IO_TIMEOUT, M_IO_TIMEOUT) + +/* + * Generic Bus Region Size register (Table 11-5) + */ + +#define S_IO_MULT_SIZE 0 +#define M_IO_MULT_SIZE _SB_MAKEMASK(12, S_IO_MULT_SIZE) +#define V_IO_MULT_SIZE(x) _SB_MAKEVALUE(x, S_IO_MULT_SIZE) +#define G_IO_MULT_SIZE(x) _SB_GETVALUE(x, S_IO_MULT_SIZE, M_IO_MULT_SIZE) + +#define S_IO_REGSIZE 16 /* # bits to shift size for this reg */ + +/* + * Generic Bus Region Address (Table 11-6) + */ + +#define S_IO_START_ADDR 0 +#define M_IO_START_ADDR _SB_MAKEMASK(14, S_IO_START_ADDR) +#define V_IO_START_ADDR(x) _SB_MAKEVALUE(x, S_IO_START_ADDR) +#define G_IO_START_ADDR(x) _SB_GETVALUE(x, S_IO_START_ADDR, M_IO_START_ADDR) + +#define S_IO_ADDRBASE 16 /* # bits to shift addr for this reg */ + +#define M_IO_BLK_CACHE _SB_MAKEMASK1(15) + + +/* + * Generic Bus Timing 0 Registers (Table 11-7) + */ + +#define S_IO_ALE_WIDTH 0 +#define M_IO_ALE_WIDTH _SB_MAKEMASK(3, S_IO_ALE_WIDTH) +#define V_IO_ALE_WIDTH(x) _SB_MAKEVALUE(x, S_IO_ALE_WIDTH) +#define G_IO_ALE_WIDTH(x) _SB_GETVALUE(x, S_IO_ALE_WIDTH, M_IO_ALE_WIDTH) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ + || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_IO_EARLY_CS _SB_MAKEMASK1(3) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#define S_IO_ALE_TO_CS 4 +#define M_IO_ALE_TO_CS _SB_MAKEMASK(2, S_IO_ALE_TO_CS) +#define V_IO_ALE_TO_CS(x) _SB_MAKEVALUE(x, S_IO_ALE_TO_CS) +#define G_IO_ALE_TO_CS(x) _SB_GETVALUE(x, S_IO_ALE_TO_CS, M_IO_ALE_TO_CS) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ + || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_IO_BURST_WIDTH _SB_MAKE64(6) +#define M_IO_BURST_WIDTH _SB_MAKEMASK(2, S_IO_BURST_WIDTH) +#define V_IO_BURST_WIDTH(x) _SB_MAKEVALUE(x, S_IO_BURST_WIDTH) +#define G_IO_BURST_WIDTH(x) _SB_GETVALUE(x, S_IO_BURST_WIDTH, M_IO_BURST_WIDTH) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#define S_IO_CS_WIDTH 8 +#define M_IO_CS_WIDTH _SB_MAKEMASK(5, S_IO_CS_WIDTH) +#define V_IO_CS_WIDTH(x) _SB_MAKEVALUE(x, S_IO_CS_WIDTH) +#define G_IO_CS_WIDTH(x) _SB_GETVALUE(x, S_IO_CS_WIDTH, M_IO_CS_WIDTH) + +#define S_IO_RDY_SMPLE 13 +#define M_IO_RDY_SMPLE _SB_MAKEMASK(3, S_IO_RDY_SMPLE) +#define V_IO_RDY_SMPLE(x) _SB_MAKEVALUE(x, S_IO_RDY_SMPLE) +#define G_IO_RDY_SMPLE(x) _SB_GETVALUE(x, S_IO_RDY_SMPLE, M_IO_RDY_SMPLE) + + +/* + * Generic Bus Timing 1 Registers (Table 11-8) + */ + +#define S_IO_ALE_TO_WRITE 0 +#define M_IO_ALE_TO_WRITE _SB_MAKEMASK(3, S_IO_ALE_TO_WRITE) +#define V_IO_ALE_TO_WRITE(x) _SB_MAKEVALUE(x, S_IO_ALE_TO_WRITE) +#define G_IO_ALE_TO_WRITE(x) _SB_GETVALUE(x, S_IO_ALE_TO_WRITE, M_IO_ALE_TO_WRITE) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ + || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_IO_RDY_SYNC _SB_MAKEMASK1(3) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#define S_IO_WRITE_WIDTH 4 +#define M_IO_WRITE_WIDTH _SB_MAKEMASK(4, S_IO_WRITE_WIDTH) +#define V_IO_WRITE_WIDTH(x) _SB_MAKEVALUE(x, S_IO_WRITE_WIDTH) +#define G_IO_WRITE_WIDTH(x) _SB_GETVALUE(x, S_IO_WRITE_WIDTH, M_IO_WRITE_WIDTH) + +#define S_IO_IDLE_CYCLE 8 +#define M_IO_IDLE_CYCLE _SB_MAKEMASK(4, S_IO_IDLE_CYCLE) +#define V_IO_IDLE_CYCLE(x) _SB_MAKEVALUE(x, S_IO_IDLE_CYCLE) +#define G_IO_IDLE_CYCLE(x) _SB_GETVALUE(x, S_IO_IDLE_CYCLE, M_IO_IDLE_CYCLE) + +#define S_IO_OE_TO_CS 12 +#define M_IO_OE_TO_CS _SB_MAKEMASK(2, S_IO_OE_TO_CS) +#define V_IO_OE_TO_CS(x) _SB_MAKEVALUE(x, S_IO_OE_TO_CS) +#define G_IO_OE_TO_CS(x) _SB_GETVALUE(x, S_IO_OE_TO_CS, M_IO_OE_TO_CS) + +#define S_IO_CS_TO_OE 14 +#define M_IO_CS_TO_OE _SB_MAKEMASK(2, S_IO_CS_TO_OE) +#define V_IO_CS_TO_OE(x) _SB_MAKEVALUE(x, S_IO_CS_TO_OE) +#define G_IO_CS_TO_OE(x) _SB_GETVALUE(x, S_IO_CS_TO_OE, M_IO_CS_TO_OE) + +/* + * Generic Bus Interrupt Status Register (Table 11-9) + */ + +#define M_IO_CS_ERR_INT _SB_MAKEMASK(0, 8) +#define M_IO_CS0_ERR_INT _SB_MAKEMASK1(0) +#define M_IO_CS1_ERR_INT _SB_MAKEMASK1(1) +#define M_IO_CS2_ERR_INT _SB_MAKEMASK1(2) +#define M_IO_CS3_ERR_INT _SB_MAKEMASK1(3) +#define M_IO_CS4_ERR_INT _SB_MAKEMASK1(4) +#define M_IO_CS5_ERR_INT _SB_MAKEMASK1(5) +#define M_IO_CS6_ERR_INT _SB_MAKEMASK1(6) +#define M_IO_CS7_ERR_INT _SB_MAKEMASK1(7) + +#define M_IO_RD_PAR_INT _SB_MAKEMASK1(9) +#define M_IO_TIMEOUT_INT _SB_MAKEMASK1(10) +#define M_IO_ILL_ADDR_INT _SB_MAKEMASK1(11) +#define M_IO_MULT_CS_INT _SB_MAKEMASK1(12) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_IO_COH_ERR _SB_MAKEMASK1(14) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + + +/* + * Generic Bus Output Drive Control Register 0 (Table 14-18) + */ + +#define S_IO_SLEW0 0 +#define M_IO_SLEW0 _SB_MAKEMASK(2, S_IO_SLEW0) +#define V_IO_SLEW0(x) _SB_MAKEVALUE(x, S_IO_SLEW0) +#define G_IO_SLEW0(x) _SB_GETVALUE(x, S_IO_SLEW0, M_IO_SLEW0) + +#define S_IO_DRV_A 2 +#define M_IO_DRV_A _SB_MAKEMASK(2, S_IO_DRV_A) +#define V_IO_DRV_A(x) _SB_MAKEVALUE(x, S_IO_DRV_A) +#define G_IO_DRV_A(x) _SB_GETVALUE(x, S_IO_DRV_A, M_IO_DRV_A) + +#define S_IO_DRV_B 6 +#define M_IO_DRV_B _SB_MAKEMASK(2, S_IO_DRV_B) +#define V_IO_DRV_B(x) _SB_MAKEVALUE(x, S_IO_DRV_B) +#define G_IO_DRV_B(x) _SB_GETVALUE(x, S_IO_DRV_B, M_IO_DRV_B) + +#define S_IO_DRV_C 10 +#define M_IO_DRV_C _SB_MAKEMASK(2, S_IO_DRV_C) +#define V_IO_DRV_C(x) _SB_MAKEVALUE(x, S_IO_DRV_C) +#define G_IO_DRV_C(x) _SB_GETVALUE(x, S_IO_DRV_C, M_IO_DRV_C) + +#define S_IO_DRV_D 14 +#define M_IO_DRV_D _SB_MAKEMASK(2, S_IO_DRV_D) +#define V_IO_DRV_D(x) _SB_MAKEVALUE(x, S_IO_DRV_D) +#define G_IO_DRV_D(x) _SB_GETVALUE(x, S_IO_DRV_D, M_IO_DRV_D) + +/* + * Generic Bus Output Drive Control Register 1 (Table 14-19) + */ + +#define S_IO_DRV_E 2 +#define M_IO_DRV_E _SB_MAKEMASK(2, S_IO_DRV_E) +#define V_IO_DRV_E(x) _SB_MAKEVALUE(x, S_IO_DRV_E) +#define G_IO_DRV_E(x) _SB_GETVALUE(x, S_IO_DRV_E, M_IO_DRV_E) + +#define S_IO_DRV_F 6 +#define M_IO_DRV_F _SB_MAKEMASK(2, S_IO_DRV_F) +#define V_IO_DRV_F(x) _SB_MAKEVALUE(x, S_IO_DRV_F) +#define G_IO_DRV_F(x) _SB_GETVALUE(x, S_IO_DRV_F, M_IO_DRV_F) + +#define S_IO_SLEW1 8 +#define M_IO_SLEW1 _SB_MAKEMASK(2, S_IO_SLEW1) +#define V_IO_SLEW1(x) _SB_MAKEVALUE(x, S_IO_SLEW1) +#define G_IO_SLEW1(x) _SB_GETVALUE(x, S_IO_SLEW1, M_IO_SLEW1) + +#define S_IO_DRV_G 10 +#define M_IO_DRV_G _SB_MAKEMASK(2, S_IO_DRV_G) +#define V_IO_DRV_G(x) _SB_MAKEVALUE(x, S_IO_DRV_G) +#define G_IO_DRV_G(x) _SB_GETVALUE(x, S_IO_DRV_G, M_IO_DRV_G) + +#define S_IO_SLEW2 12 +#define M_IO_SLEW2 _SB_MAKEMASK(2, S_IO_SLEW2) +#define V_IO_SLEW2(x) _SB_MAKEVALUE(x, S_IO_SLEW2) +#define G_IO_SLEW2(x) _SB_GETVALUE(x, S_IO_SLEW2, M_IO_SLEW2) + +#define S_IO_DRV_H 14 +#define M_IO_DRV_H _SB_MAKEMASK(2, S_IO_DRV_H) +#define V_IO_DRV_H(x) _SB_MAKEVALUE(x, S_IO_DRV_H) +#define G_IO_DRV_H(x) _SB_GETVALUE(x, S_IO_DRV_H, M_IO_DRV_H) + +/* + * Generic Bus Output Drive Control Register 2 (Table 14-20) + */ + +#define S_IO_DRV_J 2 +#define M_IO_DRV_J _SB_MAKEMASK(2, S_IO_DRV_J) +#define V_IO_DRV_J(x) _SB_MAKEVALUE(x, S_IO_DRV_J) +#define G_IO_DRV_J(x) _SB_GETVALUE(x, S_IO_DRV_J, M_IO_DRV_J) + +#define S_IO_DRV_K 6 +#define M_IO_DRV_K _SB_MAKEMASK(2, S_IO_DRV_K) +#define V_IO_DRV_K(x) _SB_MAKEVALUE(x, S_IO_DRV_K) +#define G_IO_DRV_K(x) _SB_GETVALUE(x, S_IO_DRV_K, M_IO_DRV_K) + +#define S_IO_DRV_L 10 +#define M_IO_DRV_L _SB_MAKEMASK(2, S_IO_DRV_L) +#define V_IO_DRV_L(x) _SB_MAKEVALUE(x, S_IO_DRV_L) +#define G_IO_DRV_L(x) _SB_GETVALUE(x, S_IO_DRV_L, M_IO_DRV_L) + +#define S_IO_DRV_M 14 +#define M_IO_DRV_M _SB_MAKEMASK(2, S_IO_DRV_M) +#define V_IO_DRV_M(x) _SB_MAKEVALUE(x, S_IO_DRV_M) +#define G_IO_DRV_M(x) _SB_GETVALUE(x, S_IO_DRV_M, M_IO_DRV_M) + +/* + * Generic Bus Output Drive Control Register 3 (Table 14-21) + */ + +#define S_IO_SLEW3 0 +#define M_IO_SLEW3 _SB_MAKEMASK(2, S_IO_SLEW3) +#define V_IO_SLEW3(x) _SB_MAKEVALUE(x, S_IO_SLEW3) +#define G_IO_SLEW3(x) _SB_GETVALUE(x, S_IO_SLEW3, M_IO_SLEW3) + +#define S_IO_DRV_N 2 +#define M_IO_DRV_N _SB_MAKEMASK(2, S_IO_DRV_N) +#define V_IO_DRV_N(x) _SB_MAKEVALUE(x, S_IO_DRV_N) +#define G_IO_DRV_N(x) _SB_GETVALUE(x, S_IO_DRV_N, M_IO_DRV_N) + +#define S_IO_DRV_P 6 +#define M_IO_DRV_P _SB_MAKEMASK(2, S_IO_DRV_P) +#define V_IO_DRV_P(x) _SB_MAKEVALUE(x, S_IO_DRV_P) +#define G_IO_DRV_P(x) _SB_GETVALUE(x, S_IO_DRV_P, M_IO_DRV_P) + +#define S_IO_DRV_Q 10 +#define M_IO_DRV_Q _SB_MAKEMASK(2, S_IO_DRV_Q) +#define V_IO_DRV_Q(x) _SB_MAKEVALUE(x, S_IO_DRV_Q) +#define G_IO_DRV_Q(x) _SB_GETVALUE(x, S_IO_DRV_Q, M_IO_DRV_Q) + +#define S_IO_DRV_R 14 +#define M_IO_DRV_R _SB_MAKEMASK(2, S_IO_DRV_R) +#define V_IO_DRV_R(x) _SB_MAKEVALUE(x, S_IO_DRV_R) +#define G_IO_DRV_R(x) _SB_GETVALUE(x, S_IO_DRV_R, M_IO_DRV_R) + + +/* + * PCMCIA configuration register (Table 12-6) + */ + +#define M_PCMCIA_CFG_ATTRMEM _SB_MAKEMASK1(0) +#define M_PCMCIA_CFG_3VEN _SB_MAKEMASK1(1) +#define M_PCMCIA_CFG_5VEN _SB_MAKEMASK1(2) +#define M_PCMCIA_CFG_VPPEN _SB_MAKEMASK1(3) +#define M_PCMCIA_CFG_RESET _SB_MAKEMASK1(4) +#define M_PCMCIA_CFG_APWRONEN _SB_MAKEMASK1(5) +#define M_PCMCIA_CFG_CDMASK _SB_MAKEMASK1(6) +#define M_PCMCIA_CFG_WPMASK _SB_MAKEMASK1(7) +#define M_PCMCIA_CFG_RDYMASK _SB_MAKEMASK1(8) +#define M_PCMCIA_CFG_PWRCTL _SB_MAKEMASK1(9) + +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_PCMCIA_MODE 16 +#define M_PCMCIA_MODE _SB_MAKEMASK(3, S_PCMCIA_MODE) +#define V_PCMCIA_MODE(x) _SB_MAKEVALUE(x, S_PCMCIA_MODE) +#define G_PCMCIA_MODE(x) _SB_GETVALUE(x, S_PCMCIA_MODE, M_PCMCIA_MODE) + +#define K_PCMCIA_MODE_PCMA_NOB 0 /* standard PCMCIA "A", no "B" */ +#define K_PCMCIA_MODE_IDEA_NOB 1 /* IDE "A", no "B" */ +#define K_PCMCIA_MODE_PCMIOA_NOB 2 /* PCMCIA with I/O "A", no "B" */ +#define K_PCMCIA_MODE_PCMA_PCMB 4 /* standard PCMCIA "A", standard PCMCIA "B" */ +#define K_PCMCIA_MODE_IDEA_PCMB 5 /* IDE "A", standard PCMCIA "B" */ +#define K_PCMCIA_MODE_PCMA_IDEB 6 /* standard PCMCIA "A", IDE "B" */ +#define K_PCMCIA_MODE_IDEA_IDEB 7 /* IDE "A", IDE "B" */ +#endif + + +/* + * PCMCIA status register (Table 12-7) + */ + +#define M_PCMCIA_STATUS_CD1 _SB_MAKEMASK1(0) +#define M_PCMCIA_STATUS_CD2 _SB_MAKEMASK1(1) +#define M_PCMCIA_STATUS_VS1 _SB_MAKEMASK1(2) +#define M_PCMCIA_STATUS_VS2 _SB_MAKEMASK1(3) +#define M_PCMCIA_STATUS_WP _SB_MAKEMASK1(4) +#define M_PCMCIA_STATUS_RDY _SB_MAKEMASK1(5) +#define M_PCMCIA_STATUS_3VEN _SB_MAKEMASK1(6) +#define M_PCMCIA_STATUS_5VEN _SB_MAKEMASK1(7) +#define M_PCMCIA_STATUS_CDCHG _SB_MAKEMASK1(8) +#define M_PCMCIA_STATUS_WPCHG _SB_MAKEMASK1(9) +#define M_PCMCIA_STATUS_RDYCHG _SB_MAKEMASK1(10) + +/* + * GPIO Interrupt Type Register (table 13-3) + */ + +#define K_GPIO_INTR_DISABLE 0 +#define K_GPIO_INTR_EDGE 1 +#define K_GPIO_INTR_LEVEL 2 +#define K_GPIO_INTR_SPLIT 3 + +#define S_GPIO_INTR_TYPEX(n) (((n)/2)*2) +#define M_GPIO_INTR_TYPEX(n) _SB_MAKEMASK(2, S_GPIO_INTR_TYPEX(n)) +#define V_GPIO_INTR_TYPEX(n, x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPEX(n)) +#define G_GPIO_INTR_TYPEX(n, x) _SB_GETVALUE(x, S_GPIO_INTR_TYPEX(n), M_GPIO_INTR_TYPEX(n)) + +#define S_GPIO_INTR_TYPE0 0 +#define M_GPIO_INTR_TYPE0 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE0) +#define V_GPIO_INTR_TYPE0(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE0) +#define G_GPIO_INTR_TYPE0(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE0, M_GPIO_INTR_TYPE0) + +#define S_GPIO_INTR_TYPE2 2 +#define M_GPIO_INTR_TYPE2 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE2) +#define V_GPIO_INTR_TYPE2(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE2) +#define G_GPIO_INTR_TYPE2(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE2, M_GPIO_INTR_TYPE2) + +#define S_GPIO_INTR_TYPE4 4 +#define M_GPIO_INTR_TYPE4 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE4) +#define V_GPIO_INTR_TYPE4(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE4) +#define G_GPIO_INTR_TYPE4(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE4, M_GPIO_INTR_TYPE4) + +#define S_GPIO_INTR_TYPE6 6 +#define M_GPIO_INTR_TYPE6 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE6) +#define V_GPIO_INTR_TYPE6(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE6) +#define G_GPIO_INTR_TYPE6(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE6, M_GPIO_INTR_TYPE6) + +#define S_GPIO_INTR_TYPE8 8 +#define M_GPIO_INTR_TYPE8 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE8) +#define V_GPIO_INTR_TYPE8(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE8) +#define G_GPIO_INTR_TYPE8(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE8, M_GPIO_INTR_TYPE8) + +#define S_GPIO_INTR_TYPE10 10 +#define M_GPIO_INTR_TYPE10 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE10) +#define V_GPIO_INTR_TYPE10(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE10) +#define G_GPIO_INTR_TYPE10(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE10, M_GPIO_INTR_TYPE10) + +#define S_GPIO_INTR_TYPE12 12 +#define M_GPIO_INTR_TYPE12 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE12) +#define V_GPIO_INTR_TYPE12(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE12) +#define G_GPIO_INTR_TYPE12(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE12, M_GPIO_INTR_TYPE12) + +#define S_GPIO_INTR_TYPE14 14 +#define M_GPIO_INTR_TYPE14 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE14) +#define V_GPIO_INTR_TYPE14(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE14) +#define G_GPIO_INTR_TYPE14(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE14, M_GPIO_INTR_TYPE14) + +#if SIBYTE_HDR_FEATURE_CHIP(1480) + +/* + * GPIO Interrupt Additional Type Register + */ + +#define K_GPIO_INTR_BOTHEDGE 0 +#define K_GPIO_INTR_RISEEDGE 1 +#define K_GPIO_INTR_UNPRED1 2 +#define K_GPIO_INTR_UNPRED2 3 + +#define S_GPIO_INTR_ATYPEX(n) (((n)/2)*2) +#define M_GPIO_INTR_ATYPEX(n) _SB_MAKEMASK(2, S_GPIO_INTR_ATYPEX(n)) +#define V_GPIO_INTR_ATYPEX(n, x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPEX(n)) +#define G_GPIO_INTR_ATYPEX(n, x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPEX(n), M_GPIO_INTR_ATYPEX(n)) + +#define S_GPIO_INTR_ATYPE0 0 +#define M_GPIO_INTR_ATYPE0 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE0) +#define V_GPIO_INTR_ATYPE0(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE0) +#define G_GPIO_INTR_ATYPE0(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE0, M_GPIO_INTR_ATYPE0) + +#define S_GPIO_INTR_ATYPE2 2 +#define M_GPIO_INTR_ATYPE2 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE2) +#define V_GPIO_INTR_ATYPE2(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE2) +#define G_GPIO_INTR_ATYPE2(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE2, M_GPIO_INTR_ATYPE2) + +#define S_GPIO_INTR_ATYPE4 4 +#define M_GPIO_INTR_ATYPE4 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE4) +#define V_GPIO_INTR_ATYPE4(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE4) +#define G_GPIO_INTR_ATYPE4(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE4, M_GPIO_INTR_ATYPE4) + +#define S_GPIO_INTR_ATYPE6 6 +#define M_GPIO_INTR_ATYPE6 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE6) +#define V_GPIO_INTR_ATYPE6(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE6) +#define G_GPIO_INTR_ATYPE6(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE6, M_GPIO_INTR_ATYPE6) + +#define S_GPIO_INTR_ATYPE8 8 +#define M_GPIO_INTR_ATYPE8 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE8) +#define V_GPIO_INTR_ATYPE8(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE8) +#define G_GPIO_INTR_ATYPE8(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE8, M_GPIO_INTR_ATYPE8) + +#define S_GPIO_INTR_ATYPE10 10 +#define M_GPIO_INTR_ATYPE10 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE10) +#define V_GPIO_INTR_ATYPE10(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE10) +#define G_GPIO_INTR_ATYPE10(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE10, M_GPIO_INTR_ATYPE10) + +#define S_GPIO_INTR_ATYPE12 12 +#define M_GPIO_INTR_ATYPE12 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE12) +#define V_GPIO_INTR_ATYPE12(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE12) +#define G_GPIO_INTR_ATYPE12(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE12, M_GPIO_INTR_ATYPE12) + +#define S_GPIO_INTR_ATYPE14 14 +#define M_GPIO_INTR_ATYPE14 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE14) +#define V_GPIO_INTR_ATYPE14(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE14) +#define G_GPIO_INTR_ATYPE14(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE14, M_GPIO_INTR_ATYPE14) +#endif + + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_int.h b/arch/mips/include/asm/sibyte/sb1250_int.h new file mode 100644 index 000000000000..f2850b4bcfd4 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_int.h @@ -0,0 +1,248 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * Interrupt Mapper definitions File: sb1250_int.h + * + * This module contains constants for manipulating the SB1250's + * interrupt mapper and definitions for the interrupt sources. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000, 2001, 2002, 2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_INT_H +#define _SB1250_INT_H + +#include "sb1250_defs.h" + +/* ********************************************************************* + * Interrupt Mapper Constants + ********************************************************************* */ + +/* + * Interrupt sources (Table 4-8, UM 0.2) + * + * First, the interrupt numbers. + */ + +#define K_INT_SOURCES 64 + +#define K_INT_WATCHDOG_TIMER_0 0 +#define K_INT_WATCHDOG_TIMER_1 1 +#define K_INT_TIMER_0 2 +#define K_INT_TIMER_1 3 +#define K_INT_TIMER_2 4 +#define K_INT_TIMER_3 5 +#define K_INT_SMB_0 6 +#define K_INT_SMB_1 7 +#define K_INT_UART_0 8 +#define K_INT_UART_1 9 +#define K_INT_SER_0 10 +#define K_INT_SER_1 11 +#define K_INT_PCMCIA 12 +#define K_INT_ADDR_TRAP 13 +#define K_INT_PERF_CNT 14 +#define K_INT_TRACE_FREEZE 15 +#define K_INT_BAD_ECC 16 +#define K_INT_COR_ECC 17 +#define K_INT_IO_BUS 18 +#define K_INT_MAC_0 19 +#define K_INT_MAC_1 20 +#define K_INT_MAC_2 21 +#define K_INT_DM_CH_0 22 +#define K_INT_DM_CH_1 23 +#define K_INT_DM_CH_2 24 +#define K_INT_DM_CH_3 25 +#define K_INT_MBOX_0 26 +#define K_INT_MBOX_1 27 +#define K_INT_MBOX_2 28 +#define K_INT_MBOX_3 29 +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define K_INT_CYCLE_CP0_INT 30 +#define K_INT_CYCLE_CP1_INT 31 +#endif /* 1250 PASS2 || 112x PASS1 */ +#define K_INT_GPIO_0 32 +#define K_INT_GPIO_1 33 +#define K_INT_GPIO_2 34 +#define K_INT_GPIO_3 35 +#define K_INT_GPIO_4 36 +#define K_INT_GPIO_5 37 +#define K_INT_GPIO_6 38 +#define K_INT_GPIO_7 39 +#define K_INT_GPIO_8 40 +#define K_INT_GPIO_9 41 +#define K_INT_GPIO_10 42 +#define K_INT_GPIO_11 43 +#define K_INT_GPIO_12 44 +#define K_INT_GPIO_13 45 +#define K_INT_GPIO_14 46 +#define K_INT_GPIO_15 47 +#define K_INT_LDT_FATAL 48 +#define K_INT_LDT_NONFATAL 49 +#define K_INT_LDT_SMI 50 +#define K_INT_LDT_NMI 51 +#define K_INT_LDT_INIT 52 +#define K_INT_LDT_STARTUP 53 +#define K_INT_LDT_EXT 54 +#define K_INT_PCI_ERROR 55 +#define K_INT_PCI_INTA 56 +#define K_INT_PCI_INTB 57 +#define K_INT_PCI_INTC 58 +#define K_INT_PCI_INTD 59 +#define K_INT_SPARE_2 60 +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define K_INT_MAC_0_CH1 61 +#define K_INT_MAC_1_CH1 62 +#define K_INT_MAC_2_CH1 63 +#endif /* 1250 PASS2 || 112x PASS1 */ + +/* + * Mask values for each interrupt + */ + +#define M_INT_WATCHDOG_TIMER_0 _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_0) +#define M_INT_WATCHDOG_TIMER_1 _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_1) +#define M_INT_TIMER_0 _SB_MAKEMASK1(K_INT_TIMER_0) +#define M_INT_TIMER_1 _SB_MAKEMASK1(K_INT_TIMER_1) +#define M_INT_TIMER_2 _SB_MAKEMASK1(K_INT_TIMER_2) +#define M_INT_TIMER_3 _SB_MAKEMASK1(K_INT_TIMER_3) +#define M_INT_SMB_0 _SB_MAKEMASK1(K_INT_SMB_0) +#define M_INT_SMB_1 _SB_MAKEMASK1(K_INT_SMB_1) +#define M_INT_UART_0 _SB_MAKEMASK1(K_INT_UART_0) +#define M_INT_UART_1 _SB_MAKEMASK1(K_INT_UART_1) +#define M_INT_SER_0 _SB_MAKEMASK1(K_INT_SER_0) +#define M_INT_SER_1 _SB_MAKEMASK1(K_INT_SER_1) +#define M_INT_PCMCIA _SB_MAKEMASK1(K_INT_PCMCIA) +#define M_INT_ADDR_TRAP _SB_MAKEMASK1(K_INT_ADDR_TRAP) +#define M_INT_PERF_CNT _SB_MAKEMASK1(K_INT_PERF_CNT) +#define M_INT_TRACE_FREEZE _SB_MAKEMASK1(K_INT_TRACE_FREEZE) +#define M_INT_BAD_ECC _SB_MAKEMASK1(K_INT_BAD_ECC) +#define M_INT_COR_ECC _SB_MAKEMASK1(K_INT_COR_ECC) +#define M_INT_IO_BUS _SB_MAKEMASK1(K_INT_IO_BUS) +#define M_INT_MAC_0 _SB_MAKEMASK1(K_INT_MAC_0) +#define M_INT_MAC_1 _SB_MAKEMASK1(K_INT_MAC_1) +#define M_INT_MAC_2 _SB_MAKEMASK1(K_INT_MAC_2) +#define M_INT_DM_CH_0 _SB_MAKEMASK1(K_INT_DM_CH_0) +#define M_INT_DM_CH_1 _SB_MAKEMASK1(K_INT_DM_CH_1) +#define M_INT_DM_CH_2 _SB_MAKEMASK1(K_INT_DM_CH_2) +#define M_INT_DM_CH_3 _SB_MAKEMASK1(K_INT_DM_CH_3) +#define M_INT_MBOX_0 _SB_MAKEMASK1(K_INT_MBOX_0) +#define M_INT_MBOX_1 _SB_MAKEMASK1(K_INT_MBOX_1) +#define M_INT_MBOX_2 _SB_MAKEMASK1(K_INT_MBOX_2) +#define M_INT_MBOX_3 _SB_MAKEMASK1(K_INT_MBOX_3) +#define M_INT_MBOX_ALL _SB_MAKEMASK(4, K_INT_MBOX_0) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_INT_CYCLE_CP0_INT _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT) +#define M_INT_CYCLE_CP1_INT _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT) +#endif /* 1250 PASS2 || 112x PASS1 */ +#define M_INT_GPIO_0 _SB_MAKEMASK1(K_INT_GPIO_0) +#define M_INT_GPIO_1 _SB_MAKEMASK1(K_INT_GPIO_1) +#define M_INT_GPIO_2 _SB_MAKEMASK1(K_INT_GPIO_2) +#define M_INT_GPIO_3 _SB_MAKEMASK1(K_INT_GPIO_3) +#define M_INT_GPIO_4 _SB_MAKEMASK1(K_INT_GPIO_4) +#define M_INT_GPIO_5 _SB_MAKEMASK1(K_INT_GPIO_5) +#define M_INT_GPIO_6 _SB_MAKEMASK1(K_INT_GPIO_6) +#define M_INT_GPIO_7 _SB_MAKEMASK1(K_INT_GPIO_7) +#define M_INT_GPIO_8 _SB_MAKEMASK1(K_INT_GPIO_8) +#define M_INT_GPIO_9 _SB_MAKEMASK1(K_INT_GPIO_9) +#define M_INT_GPIO_10 _SB_MAKEMASK1(K_INT_GPIO_10) +#define M_INT_GPIO_11 _SB_MAKEMASK1(K_INT_GPIO_11) +#define M_INT_GPIO_12 _SB_MAKEMASK1(K_INT_GPIO_12) +#define M_INT_GPIO_13 _SB_MAKEMASK1(K_INT_GPIO_13) +#define M_INT_GPIO_14 _SB_MAKEMASK1(K_INT_GPIO_14) +#define M_INT_GPIO_15 _SB_MAKEMASK1(K_INT_GPIO_15) +#define M_INT_LDT_FATAL _SB_MAKEMASK1(K_INT_LDT_FATAL) +#define M_INT_LDT_NONFATAL _SB_MAKEMASK1(K_INT_LDT_NONFATAL) +#define M_INT_LDT_SMI _SB_MAKEMASK1(K_INT_LDT_SMI) +#define M_INT_LDT_NMI _SB_MAKEMASK1(K_INT_LDT_NMI) +#define M_INT_LDT_INIT _SB_MAKEMASK1(K_INT_LDT_INIT) +#define M_INT_LDT_STARTUP _SB_MAKEMASK1(K_INT_LDT_STARTUP) +#define M_INT_LDT_EXT _SB_MAKEMASK1(K_INT_LDT_EXT) +#define M_INT_PCI_ERROR _SB_MAKEMASK1(K_INT_PCI_ERROR) +#define M_INT_PCI_INTA _SB_MAKEMASK1(K_INT_PCI_INTA) +#define M_INT_PCI_INTB _SB_MAKEMASK1(K_INT_PCI_INTB) +#define M_INT_PCI_INTC _SB_MAKEMASK1(K_INT_PCI_INTC) +#define M_INT_PCI_INTD _SB_MAKEMASK1(K_INT_PCI_INTD) +#define M_INT_SPARE_2 _SB_MAKEMASK1(K_INT_SPARE_2) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_INT_MAC_0_CH1 _SB_MAKEMASK1(K_INT_MAC_0_CH1) +#define M_INT_MAC_1_CH1 _SB_MAKEMASK1(K_INT_MAC_1_CH1) +#define M_INT_MAC_2_CH1 _SB_MAKEMASK1(K_INT_MAC_2_CH1) +#endif /* 1250 PASS2 || 112x PASS1 */ + +/* + * Interrupt mappings + */ + +#define K_INT_MAP_I0 0 /* interrupt pins on processor */ +#define K_INT_MAP_I1 1 +#define K_INT_MAP_I2 2 +#define K_INT_MAP_I3 3 +#define K_INT_MAP_I4 4 +#define K_INT_MAP_I5 5 +#define K_INT_MAP_NMI 6 /* nonmaskable */ +#define K_INT_MAP_DINT 7 /* debug interrupt */ + +/* + * LDT Interrupt Set Register (table 4-5) + */ + +#define S_INT_LDT_INTMSG 0 +#define M_INT_LDT_INTMSG _SB_MAKEMASK(3, S_INT_LDT_INTMSG) +#define V_INT_LDT_INTMSG(x) _SB_MAKEVALUE(x, S_INT_LDT_INTMSG) +#define G_INT_LDT_INTMSG(x) _SB_GETVALUE(x, S_INT_LDT_INTMSG, M_INT_LDT_INTMSG) + +#define K_INT_LDT_INTMSG_FIXED 0 +#define K_INT_LDT_INTMSG_ARBITRATED 1 +#define K_INT_LDT_INTMSG_SMI 2 +#define K_INT_LDT_INTMSG_NMI 3 +#define K_INT_LDT_INTMSG_INIT 4 +#define K_INT_LDT_INTMSG_STARTUP 5 +#define K_INT_LDT_INTMSG_EXTINT 6 +#define K_INT_LDT_INTMSG_RESERVED 7 + +#define M_INT_LDT_EDGETRIGGER 0 +#define M_INT_LDT_LEVELTRIGGER _SB_MAKEMASK1(3) + +#define M_INT_LDT_PHYSICALDEST 0 +#define M_INT_LDT_LOGICALDEST _SB_MAKEMASK1(4) + +#define S_INT_LDT_INTDEST 5 +#define M_INT_LDT_INTDEST _SB_MAKEMASK(10, S_INT_LDT_INTDEST) +#define V_INT_LDT_INTDEST(x) _SB_MAKEVALUE(x, S_INT_LDT_INTDEST) +#define G_INT_LDT_INTDEST(x) _SB_GETVALUE(x, S_INT_LDT_INTDEST, M_INT_LDT_INTDEST) + +#define S_INT_LDT_VECTOR 13 +#define M_INT_LDT_VECTOR _SB_MAKEMASK(8, S_INT_LDT_VECTOR) +#define V_INT_LDT_VECTOR(x) _SB_MAKEVALUE(x, S_INT_LDT_VECTOR) +#define G_INT_LDT_VECTOR(x) _SB_GETVALUE(x, S_INT_LDT_VECTOR, M_INT_LDT_VECTOR) + +/* + * Vector format (Table 4-6) + */ + +#define M_LDTVECT_RAISEINT 0x00 +#define M_LDTVECT_RAISEMBOX 0x40 + + +#endif /* 1250/112x */ diff --git a/arch/mips/include/asm/sibyte/sb1250_l2c.h b/arch/mips/include/asm/sibyte/sb1250_l2c.h new file mode 100644 index 000000000000..6554dcf05cfe --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_l2c.h @@ -0,0 +1,131 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * L2 Cache constants and macros File: sb1250_l2c.h + * + * This module contains constants useful for manipulating the + * level 2 cache. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_L2C_H +#define _SB1250_L2C_H + +#include "sb1250_defs.h" + +/* + * Level 2 Cache Tag register (Table 5-3) + */ + +#define S_L2C_TAG_MBZ 0 +#define M_L2C_TAG_MBZ _SB_MAKEMASK(5, S_L2C_TAG_MBZ) + +#define S_L2C_TAG_INDEX 5 +#define M_L2C_TAG_INDEX _SB_MAKEMASK(12, S_L2C_TAG_INDEX) +#define V_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x, S_L2C_TAG_INDEX) +#define G_L2C_TAG_INDEX(x) _SB_GETVALUE(x, S_L2C_TAG_INDEX, M_L2C_TAG_INDEX) + +#define S_L2C_TAG_TAG 17 +#define M_L2C_TAG_TAG _SB_MAKEMASK(23, S_L2C_TAG_TAG) +#define V_L2C_TAG_TAG(x) _SB_MAKEVALUE(x, S_L2C_TAG_TAG) +#define G_L2C_TAG_TAG(x) _SB_GETVALUE(x, S_L2C_TAG_TAG, M_L2C_TAG_TAG) + +#define S_L2C_TAG_ECC 40 +#define M_L2C_TAG_ECC _SB_MAKEMASK(6, S_L2C_TAG_ECC) +#define V_L2C_TAG_ECC(x) _SB_MAKEVALUE(x, S_L2C_TAG_ECC) +#define G_L2C_TAG_ECC(x) _SB_GETVALUE(x, S_L2C_TAG_ECC, M_L2C_TAG_ECC) + +#define S_L2C_TAG_WAY 46 +#define M_L2C_TAG_WAY _SB_MAKEMASK(2, S_L2C_TAG_WAY) +#define V_L2C_TAG_WAY(x) _SB_MAKEVALUE(x, S_L2C_TAG_WAY) +#define G_L2C_TAG_WAY(x) _SB_GETVALUE(x, S_L2C_TAG_WAY, M_L2C_TAG_WAY) + +#define M_L2C_TAG_DIRTY _SB_MAKEMASK1(48) +#define M_L2C_TAG_VALID _SB_MAKEMASK1(49) + +/* + * Format of level 2 cache management address (table 5-2) + */ + +#define S_L2C_MGMT_INDEX 5 +#define M_L2C_MGMT_INDEX _SB_MAKEMASK(12, S_L2C_MGMT_INDEX) +#define V_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x, S_L2C_MGMT_INDEX) +#define G_L2C_MGMT_INDEX(x) _SB_GETVALUE(x, S_L2C_MGMT_INDEX, M_L2C_MGMT_INDEX) + +#define S_L2C_MGMT_QUADRANT 15 +#define M_L2C_MGMT_QUADRANT _SB_MAKEMASK(2, S_L2C_MGMT_QUADRANT) +#define V_L2C_MGMT_QUADRANT(x) _SB_MAKEVALUE(x, S_L2C_MGMT_QUADRANT) +#define G_L2C_MGMT_QUADRANT(x) _SB_GETVALUE(x, S_L2C_MGMT_QUADRANT, M_L2C_MGMT_QUADRANT) + +#define S_L2C_MGMT_HALF 16 +#define M_L2C_MGMT_HALF _SB_MAKEMASK(1, S_L2C_MGMT_HALF) + +#define S_L2C_MGMT_WAY 17 +#define M_L2C_MGMT_WAY _SB_MAKEMASK(2, S_L2C_MGMT_WAY) +#define V_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x, S_L2C_MGMT_WAY) +#define G_L2C_MGMT_WAY(x) _SB_GETVALUE(x, S_L2C_MGMT_WAY, M_L2C_MGMT_WAY) + +#define S_L2C_MGMT_ECC_DIAG 21 +#define M_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2, S_L2C_MGMT_ECC_DIAG) +#define V_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x, S_L2C_MGMT_ECC_DIAG) +#define G_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x, S_L2C_MGMT_ECC_DIAG, M_L2C_MGMT_ECC_DIAG) + +#define S_L2C_MGMT_TAG 23 +#define M_L2C_MGMT_TAG _SB_MAKEMASK(4, S_L2C_MGMT_TAG) +#define V_L2C_MGMT_TAG(x) _SB_MAKEVALUE(x, S_L2C_MGMT_TAG) +#define G_L2C_MGMT_TAG(x) _SB_GETVALUE(x, S_L2C_MGMT_TAG, M_L2C_MGMT_TAG) + +#define M_L2C_MGMT_DIRTY _SB_MAKEMASK1(19) +#define M_L2C_MGMT_VALID _SB_MAKEMASK1(20) + +#define A_L2C_MGMT_TAG_BASE 0x00D0000000 + +#define L2C_ENTRIES_PER_WAY 4096 +#define L2C_NUM_WAYS 4 + + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +/* + * L2 Read Misc. register (A_L2_READ_MISC) + */ +#define S_L2C_MISC_NO_WAY 10 +#define M_L2C_MISC_NO_WAY _SB_MAKEMASK(4, S_L2C_MISC_NO_WAY) +#define V_L2C_MISC_NO_WAY(x) _SB_MAKEVALUE(x, S_L2C_MISC_NO_WAY) +#define G_L2C_MISC_NO_WAY(x) _SB_GETVALUE(x, S_L2C_MISC_NO_WAY, M_L2C_MISC_NO_WAY) + +#define M_L2C_MISC_ECC_CLEANUP_DIS _SB_MAKEMASK1(9) +#define M_L2C_MISC_MC_PRIO_LOW _SB_MAKEMASK1(8) +#define M_L2C_MISC_SOFT_DISABLE_T _SB_MAKEMASK1(7) +#define M_L2C_MISC_SOFT_DISABLE_B _SB_MAKEMASK1(6) +#define M_L2C_MISC_SOFT_DISABLE_R _SB_MAKEMASK1(5) +#define M_L2C_MISC_SOFT_DISABLE_L _SB_MAKEMASK1(4) +#define M_L2C_MISC_SCACHE_DISABLE_T _SB_MAKEMASK1(3) +#define M_L2C_MISC_SCACHE_DISABLE_B _SB_MAKEMASK1(2) +#define M_L2C_MISC_SCACHE_DISABLE_R _SB_MAKEMASK1(1) +#define M_L2C_MISC_SCACHE_DISABLE_L _SB_MAKEMASK1(0) +#endif /* 1250 PASS3 || 112x PASS1 */ + + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_ldt.h b/arch/mips/include/asm/sibyte/sb1250_ldt.h new file mode 100644 index 000000000000..081e8b1c4ad0 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_ldt.h @@ -0,0 +1,423 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * LDT constants File: sb1250_ldt.h + * + * This module contains constants and macros to describe + * the LDT interface on the SB1250. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000, 2001, 2002, 2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_LDT_H +#define _SB1250_LDT_H + +#include "sb1250_defs.h" + +#define K_LDT_VENDOR_SIBYTE 0x166D +#define K_LDT_DEVICE_SB1250 0x0002 + +/* + * LDT Interface Type 1 (bridge) configuration header + */ + +#define R_LDT_TYPE1_DEVICEID 0x0000 +#define R_LDT_TYPE1_CMDSTATUS 0x0004 +#define R_LDT_TYPE1_CLASSREV 0x0008 +#define R_LDT_TYPE1_DEVHDR 0x000C +#define R_LDT_TYPE1_BAR0 0x0010 /* not used */ +#define R_LDT_TYPE1_BAR1 0x0014 /* not used */ + +#define R_LDT_TYPE1_BUSID 0x0018 /* bus ID register */ +#define R_LDT_TYPE1_SECSTATUS 0x001C /* secondary status / I/O base/limit */ +#define R_LDT_TYPE1_MEMLIMIT 0x0020 +#define R_LDT_TYPE1_PREFETCH 0x0024 +#define R_LDT_TYPE1_PREF_BASE 0x0028 +#define R_LDT_TYPE1_PREF_LIMIT 0x002C +#define R_LDT_TYPE1_IOLIMIT 0x0030 +#define R_LDT_TYPE1_CAPPTR 0x0034 +#define R_LDT_TYPE1_ROMADDR 0x0038 +#define R_LDT_TYPE1_BRCTL 0x003C +#define R_LDT_TYPE1_CMD 0x0040 +#define R_LDT_TYPE1_LINKCTRL 0x0044 +#define R_LDT_TYPE1_LINKFREQ 0x0048 +#define R_LDT_TYPE1_RESERVED1 0x004C +#define R_LDT_TYPE1_SRICMD 0x0050 +#define R_LDT_TYPE1_SRITXNUM 0x0054 +#define R_LDT_TYPE1_SRIRXNUM 0x0058 +#define R_LDT_TYPE1_ERRSTATUS 0x0068 +#define R_LDT_TYPE1_SRICTRL 0x006C +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define R_LDT_TYPE1_ADDSTATUS 0x0070 +#endif /* 1250 PASS2 || 112x PASS1 */ +#define R_LDT_TYPE1_TXBUFCNT 0x00C8 +#define R_LDT_TYPE1_EXPCRC 0x00DC +#define R_LDT_TYPE1_RXCRC 0x00F0 + + +/* + * LDT Device ID register + */ + +#define S_LDT_DEVICEID_VENDOR 0 +#define M_LDT_DEVICEID_VENDOR _SB_MAKEMASK_32(16, S_LDT_DEVICEID_VENDOR) +#define V_LDT_DEVICEID_VENDOR(x) _SB_MAKEVALUE_32(x, S_LDT_DEVICEID_VENDOR) +#define G_LDT_DEVICEID_VENDOR(x) _SB_GETVALUE_32(x, S_LDT_DEVICEID_VENDOR, M_LDT_DEVICEID_VENDOR) + +#define S_LDT_DEVICEID_DEVICEID 16 +#define M_LDT_DEVICEID_DEVICEID _SB_MAKEMASK_32(16, S_LDT_DEVICEID_DEVICEID) +#define V_LDT_DEVICEID_DEVICEID(x) _SB_MAKEVALUE_32(x, S_LDT_DEVICEID_DEVICEID) +#define G_LDT_DEVICEID_DEVICEID(x) _SB_GETVALUE_32(x, S_LDT_DEVICEID_DEVICEID, M_LDT_DEVICEID_DEVICEID) + + +/* + * LDT Command Register (Table 8-13) + */ + +#define M_LDT_CMD_IOSPACE_EN _SB_MAKEMASK1_32(0) +#define M_LDT_CMD_MEMSPACE_EN _SB_MAKEMASK1_32(1) +#define M_LDT_CMD_MASTER_EN _SB_MAKEMASK1_32(2) +#define M_LDT_CMD_SPECCYC_EN _SB_MAKEMASK1_32(3) +#define M_LDT_CMD_MEMWRINV_EN _SB_MAKEMASK1_32(4) +#define M_LDT_CMD_VGAPALSNP_EN _SB_MAKEMASK1_32(5) +#define M_LDT_CMD_PARERRRESP _SB_MAKEMASK1_32(6) +#define M_LDT_CMD_WAITCYCCTRL _SB_MAKEMASK1_32(7) +#define M_LDT_CMD_SERR_EN _SB_MAKEMASK1_32(8) +#define M_LDT_CMD_FASTB2B_EN _SB_MAKEMASK1_32(9) + +/* + * LDT class and revision registers + */ + +#define S_LDT_CLASSREV_REV 0 +#define M_LDT_CLASSREV_REV _SB_MAKEMASK_32(8, S_LDT_CLASSREV_REV) +#define V_LDT_CLASSREV_REV(x) _SB_MAKEVALUE_32(x, S_LDT_CLASSREV_REV) +#define G_LDT_CLASSREV_REV(x) _SB_GETVALUE_32(x, S_LDT_CLASSREV_REV, M_LDT_CLASSREV_REV) + +#define S_LDT_CLASSREV_CLASS 8 +#define M_LDT_CLASSREV_CLASS _SB_MAKEMASK_32(24, S_LDT_CLASSREV_CLASS) +#define V_LDT_CLASSREV_CLASS(x) _SB_MAKEVALUE_32(x, S_LDT_CLASSREV_CLASS) +#define G_LDT_CLASSREV_CLASS(x) _SB_GETVALUE_32(x, S_LDT_CLASSREV_CLASS, M_LDT_CLASSREV_CLASS) + +#define K_LDT_REV 0x01 +#define K_LDT_CLASS 0x060000 + +/* + * Device Header (offset 0x0C) + */ + +#define S_LDT_DEVHDR_CLINESZ 0 +#define M_LDT_DEVHDR_CLINESZ _SB_MAKEMASK_32(8, S_LDT_DEVHDR_CLINESZ) +#define V_LDT_DEVHDR_CLINESZ(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_CLINESZ) +#define G_LDT_DEVHDR_CLINESZ(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_CLINESZ, M_LDT_DEVHDR_CLINESZ) + +#define S_LDT_DEVHDR_LATTMR 8 +#define M_LDT_DEVHDR_LATTMR _SB_MAKEMASK_32(8, S_LDT_DEVHDR_LATTMR) +#define V_LDT_DEVHDR_LATTMR(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_LATTMR) +#define G_LDT_DEVHDR_LATTMR(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_LATTMR, M_LDT_DEVHDR_LATTMR) + +#define S_LDT_DEVHDR_HDRTYPE 16 +#define M_LDT_DEVHDR_HDRTYPE _SB_MAKEMASK_32(8, S_LDT_DEVHDR_HDRTYPE) +#define V_LDT_DEVHDR_HDRTYPE(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_HDRTYPE) +#define G_LDT_DEVHDR_HDRTYPE(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_HDRTYPE, M_LDT_DEVHDR_HDRTYPE) + +#define K_LDT_DEVHDR_HDRTYPE_TYPE1 1 + +#define S_LDT_DEVHDR_BIST 24 +#define M_LDT_DEVHDR_BIST _SB_MAKEMASK_32(8, S_LDT_DEVHDR_BIST) +#define V_LDT_DEVHDR_BIST(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_BIST) +#define G_LDT_DEVHDR_BIST(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_BIST, M_LDT_DEVHDR_BIST) + + + +/* + * LDT Status Register (Table 8-14). Note that these constants + * assume you've read the command and status register + * together (32-bit read at offset 0x04) + * + * These bits also apply to the secondary status + * register (Table 8-15), offset 0x1C + */ + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_LDT_STATUS_VGAEN _SB_MAKEMASK1_32(3) +#endif /* 1250 PASS2 || 112x PASS1 */ +#define M_LDT_STATUS_CAPLIST _SB_MAKEMASK1_32(20) +#define M_LDT_STATUS_66MHZCAP _SB_MAKEMASK1_32(21) +#define M_LDT_STATUS_RESERVED2 _SB_MAKEMASK1_32(22) +#define M_LDT_STATUS_FASTB2BCAP _SB_MAKEMASK1_32(23) +#define M_LDT_STATUS_MSTRDPARERR _SB_MAKEMASK1_32(24) + +#define S_LDT_STATUS_DEVSELTIMING 25 +#define M_LDT_STATUS_DEVSELTIMING _SB_MAKEMASK_32(2, S_LDT_STATUS_DEVSELTIMING) +#define V_LDT_STATUS_DEVSELTIMING(x) _SB_MAKEVALUE_32(x, S_LDT_STATUS_DEVSELTIMING) +#define G_LDT_STATUS_DEVSELTIMING(x) _SB_GETVALUE_32(x, S_LDT_STATUS_DEVSELTIMING, M_LDT_STATUS_DEVSELTIMING) + +#define M_LDT_STATUS_SIGDTGTABORT _SB_MAKEMASK1_32(27) +#define M_LDT_STATUS_RCVDTGTABORT _SB_MAKEMASK1_32(28) +#define M_LDT_STATUS_RCVDMSTRABORT _SB_MAKEMASK1_32(29) +#define M_LDT_STATUS_SIGDSERR _SB_MAKEMASK1_32(30) +#define M_LDT_STATUS_DETPARERR _SB_MAKEMASK1_32(31) + +/* + * Bridge Control Register (Table 8-16). Note that these + * constants assume you've read the register as a 32-bit + * read (offset 0x3C) + */ + +#define M_LDT_BRCTL_PARERRRESP_EN _SB_MAKEMASK1_32(16) +#define M_LDT_BRCTL_SERR_EN _SB_MAKEMASK1_32(17) +#define M_LDT_BRCTL_ISA_EN _SB_MAKEMASK1_32(18) +#define M_LDT_BRCTL_VGA_EN _SB_MAKEMASK1_32(19) +#define M_LDT_BRCTL_MSTRABORTMODE _SB_MAKEMASK1_32(21) +#define M_LDT_BRCTL_SECBUSRESET _SB_MAKEMASK1_32(22) +#define M_LDT_BRCTL_FASTB2B_EN _SB_MAKEMASK1_32(23) +#define M_LDT_BRCTL_PRIDISCARD _SB_MAKEMASK1_32(24) +#define M_LDT_BRCTL_SECDISCARD _SB_MAKEMASK1_32(25) +#define M_LDT_BRCTL_DISCARDSTAT _SB_MAKEMASK1_32(26) +#define M_LDT_BRCTL_DISCARDSERR_EN _SB_MAKEMASK1_32(27) + +/* + * LDT Command Register (Table 8-17). Note that these constants + * assume you've read the command and status register together + * 32-bit read at offset 0x40 + */ + +#define M_LDT_CMD_WARMRESET _SB_MAKEMASK1_32(16) +#define M_LDT_CMD_DOUBLEENDED _SB_MAKEMASK1_32(17) + +#define S_LDT_CMD_CAPTYPE 29 +#define M_LDT_CMD_CAPTYPE _SB_MAKEMASK_32(3, S_LDT_CMD_CAPTYPE) +#define V_LDT_CMD_CAPTYPE(x) _SB_MAKEVALUE_32(x, S_LDT_CMD_CAPTYPE) +#define G_LDT_CMD_CAPTYPE(x) _SB_GETVALUE_32(x, S_LDT_CMD_CAPTYPE, M_LDT_CMD_CAPTYPE) + +/* + * LDT link control register (Table 8-18), and (Table 8-19) + */ + +#define M_LDT_LINKCTRL_CAPSYNCFLOOD_EN _SB_MAKEMASK1_32(1) +#define M_LDT_LINKCTRL_CRCSTARTTEST _SB_MAKEMASK1_32(2) +#define M_LDT_LINKCTRL_CRCFORCEERR _SB_MAKEMASK1_32(3) +#define M_LDT_LINKCTRL_LINKFAIL _SB_MAKEMASK1_32(4) +#define M_LDT_LINKCTRL_INITDONE _SB_MAKEMASK1_32(5) +#define M_LDT_LINKCTRL_EOC _SB_MAKEMASK1_32(6) +#define M_LDT_LINKCTRL_XMITOFF _SB_MAKEMASK1_32(7) + +#define S_LDT_LINKCTRL_CRCERR 8 +#define M_LDT_LINKCTRL_CRCERR _SB_MAKEMASK_32(4, S_LDT_LINKCTRL_CRCERR) +#define V_LDT_LINKCTRL_CRCERR(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_CRCERR) +#define G_LDT_LINKCTRL_CRCERR(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_CRCERR, M_LDT_LINKCTRL_CRCERR) + +#define S_LDT_LINKCTRL_MAXIN 16 +#define M_LDT_LINKCTRL_MAXIN _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_MAXIN) +#define V_LDT_LINKCTRL_MAXIN(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_MAXIN) +#define G_LDT_LINKCTRL_MAXIN(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_MAXIN, M_LDT_LINKCTRL_MAXIN) + +#define M_LDT_LINKCTRL_DWFCLN _SB_MAKEMASK1_32(19) + +#define S_LDT_LINKCTRL_MAXOUT 20 +#define M_LDT_LINKCTRL_MAXOUT _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_MAXOUT) +#define V_LDT_LINKCTRL_MAXOUT(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_MAXOUT) +#define G_LDT_LINKCTRL_MAXOUT(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_MAXOUT, M_LDT_LINKCTRL_MAXOUT) + +#define M_LDT_LINKCTRL_DWFCOUT _SB_MAKEMASK1_32(23) + +#define S_LDT_LINKCTRL_WIDTHIN 24 +#define M_LDT_LINKCTRL_WIDTHIN _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_WIDTHIN) +#define V_LDT_LINKCTRL_WIDTHIN(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_WIDTHIN) +#define G_LDT_LINKCTRL_WIDTHIN(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_WIDTHIN, M_LDT_LINKCTRL_WIDTHIN) + +#define M_LDT_LINKCTRL_DWFCLIN_EN _SB_MAKEMASK1_32(27) + +#define S_LDT_LINKCTRL_WIDTHOUT 28 +#define M_LDT_LINKCTRL_WIDTHOUT _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_WIDTHOUT) +#define V_LDT_LINKCTRL_WIDTHOUT(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_WIDTHOUT) +#define G_LDT_LINKCTRL_WIDTHOUT(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_WIDTHOUT, M_LDT_LINKCTRL_WIDTHOUT) + +#define M_LDT_LINKCTRL_DWFCOUT_EN _SB_MAKEMASK1_32(31) + +/* + * LDT Link frequency register (Table 8-20) offset 0x48 + */ + +#define S_LDT_LINKFREQ_FREQ 8 +#define M_LDT_LINKFREQ_FREQ _SB_MAKEMASK_32(4, S_LDT_LINKFREQ_FREQ) +#define V_LDT_LINKFREQ_FREQ(x) _SB_MAKEVALUE_32(x, S_LDT_LINKFREQ_FREQ) +#define G_LDT_LINKFREQ_FREQ(x) _SB_GETVALUE_32(x, S_LDT_LINKFREQ_FREQ, M_LDT_LINKFREQ_FREQ) + +#define K_LDT_LINKFREQ_200MHZ 0 +#define K_LDT_LINKFREQ_300MHZ 1 +#define K_LDT_LINKFREQ_400MHZ 2 +#define K_LDT_LINKFREQ_500MHZ 3 +#define K_LDT_LINKFREQ_600MHZ 4 +#define K_LDT_LINKFREQ_800MHZ 5 +#define K_LDT_LINKFREQ_1000MHZ 6 + +/* + * LDT SRI Command Register (Table 8-21). Note that these constants + * assume you've read the command and status register together + * 32-bit read at offset 0x50 + */ + +#define M_LDT_SRICMD_SIPREADY _SB_MAKEMASK1_32(16) +#define M_LDT_SRICMD_SYNCPTRCTL _SB_MAKEMASK1_32(17) +#define M_LDT_SRICMD_REDUCESYNCZERO _SB_MAKEMASK1_32(18) +#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) +#define M_LDT_SRICMD_DISSTARVATIONCNT _SB_MAKEMASK1_32(19) /* PASS1 */ +#endif /* up to 1250 PASS1 */ +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_LDT_SRICMD_DISMULTTXVLD _SB_MAKEMASK1_32(19) +#define M_LDT_SRICMD_EXPENDIAN _SB_MAKEMASK1_32(26) +#endif /* 1250 PASS2 || 112x PASS1 */ + + +#define S_LDT_SRICMD_RXMARGIN 20 +#define M_LDT_SRICMD_RXMARGIN _SB_MAKEMASK_32(5, S_LDT_SRICMD_RXMARGIN) +#define V_LDT_SRICMD_RXMARGIN(x) _SB_MAKEVALUE_32(x, S_LDT_SRICMD_RXMARGIN) +#define G_LDT_SRICMD_RXMARGIN(x) _SB_GETVALUE_32(x, S_LDT_SRICMD_RXMARGIN, M_LDT_SRICMD_RXMARGIN) + +#define M_LDT_SRICMD_LDTPLLCOMPAT _SB_MAKEMASK1_32(25) + +#define S_LDT_SRICMD_TXINITIALOFFSET 28 +#define M_LDT_SRICMD_TXINITIALOFFSET _SB_MAKEMASK_32(3, S_LDT_SRICMD_TXINITIALOFFSET) +#define V_LDT_SRICMD_TXINITIALOFFSET(x) _SB_MAKEVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET) +#define G_LDT_SRICMD_TXINITIALOFFSET(x) _SB_GETVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET, M_LDT_SRICMD_TXINITIALOFFSET) + +#define M_LDT_SRICMD_LINKFREQDIRECT _SB_MAKEMASK1_32(31) + +/* + * LDT Error control and status register (Table 8-22) (Table 8-23) + */ + +#define M_LDT_ERRCTL_PROTFATAL_EN _SB_MAKEMASK1_32(0) +#define M_LDT_ERRCTL_PROTNONFATAL_EN _SB_MAKEMASK1_32(1) +#define M_LDT_ERRCTL_PROTSYNCFLOOD_EN _SB_MAKEMASK1_32(2) +#define M_LDT_ERRCTL_OVFFATAL_EN _SB_MAKEMASK1_32(3) +#define M_LDT_ERRCTL_OVFNONFATAL_EN _SB_MAKEMASK1_32(4) +#define M_LDT_ERRCTL_OVFSYNCFLOOD_EN _SB_MAKEMASK1_32(5) +#define M_LDT_ERRCTL_EOCNXAFATAL_EN _SB_MAKEMASK1_32(6) +#define M_LDT_ERRCTL_EOCNXANONFATAL_EN _SB_MAKEMASK1_32(7) +#define M_LDT_ERRCTL_EOCNXASYNCFLOOD_EN _SB_MAKEMASK1_32(8) +#define M_LDT_ERRCTL_CRCFATAL_EN _SB_MAKEMASK1_32(9) +#define M_LDT_ERRCTL_CRCNONFATAL_EN _SB_MAKEMASK1_32(10) +#define M_LDT_ERRCTL_SERRFATAL_EN _SB_MAKEMASK1_32(11) +#define M_LDT_ERRCTL_SRCTAGFATAL_EN _SB_MAKEMASK1_32(12) +#define M_LDT_ERRCTL_SRCTAGNONFATAL_EN _SB_MAKEMASK1_32(13) +#define M_LDT_ERRCTL_SRCTAGSYNCFLOOD_EN _SB_MAKEMASK1_32(14) +#define M_LDT_ERRCTL_MAPNXAFATAL_EN _SB_MAKEMASK1_32(15) +#define M_LDT_ERRCTL_MAPNXANONFATAL_EN _SB_MAKEMASK1_32(16) +#define M_LDT_ERRCTL_MAPNXASYNCFLOOD_EN _SB_MAKEMASK1_32(17) + +#define M_LDT_ERRCTL_PROTOERR _SB_MAKEMASK1_32(24) +#define M_LDT_ERRCTL_OVFERR _SB_MAKEMASK1_32(25) +#define M_LDT_ERRCTL_EOCNXAERR _SB_MAKEMASK1_32(26) +#define M_LDT_ERRCTL_SRCTAGERR _SB_MAKEMASK1_32(27) +#define M_LDT_ERRCTL_MAPNXAERR _SB_MAKEMASK1_32(28) + +/* + * SRI Control register (Table 8-24, 8-25) Offset 0x6C + */ + +#define S_LDT_SRICTRL_NEEDRESP 0 +#define M_LDT_SRICTRL_NEEDRESP _SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDRESP) +#define V_LDT_SRICTRL_NEEDRESP(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDRESP) +#define G_LDT_SRICTRL_NEEDRESP(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDRESP, M_LDT_SRICTRL_NEEDRESP) + +#define S_LDT_SRICTRL_NEEDNPREQ 2 +#define M_LDT_SRICTRL_NEEDNPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDNPREQ) +#define V_LDT_SRICTRL_NEEDNPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDNPREQ) +#define G_LDT_SRICTRL_NEEDNPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDNPREQ, M_LDT_SRICTRL_NEEDNPREQ) + +#define S_LDT_SRICTRL_NEEDPREQ 4 +#define M_LDT_SRICTRL_NEEDPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDPREQ) +#define V_LDT_SRICTRL_NEEDPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDPREQ) +#define G_LDT_SRICTRL_NEEDPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDPREQ, M_LDT_SRICTRL_NEEDPREQ) + +#define S_LDT_SRICTRL_WANTRESP 8 +#define M_LDT_SRICTRL_WANTRESP _SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTRESP) +#define V_LDT_SRICTRL_WANTRESP(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTRESP) +#define G_LDT_SRICTRL_WANTRESP(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTRESP, M_LDT_SRICTRL_WANTRESP) + +#define S_LDT_SRICTRL_WANTNPREQ 10 +#define M_LDT_SRICTRL_WANTNPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTNPREQ) +#define V_LDT_SRICTRL_WANTNPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTNPREQ) +#define G_LDT_SRICTRL_WANTNPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTNPREQ, M_LDT_SRICTRL_WANTNPREQ) + +#define S_LDT_SRICTRL_WANTPREQ 12 +#define M_LDT_SRICTRL_WANTPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTPREQ) +#define V_LDT_SRICTRL_WANTPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTPREQ) +#define G_LDT_SRICTRL_WANTPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTPREQ, M_LDT_SRICTRL_WANTPREQ) + +#define S_LDT_SRICTRL_BUFRELSPACE 16 +#define M_LDT_SRICTRL_BUFRELSPACE _SB_MAKEMASK_32(4, S_LDT_SRICTRL_BUFRELSPACE) +#define V_LDT_SRICTRL_BUFRELSPACE(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_BUFRELSPACE) +#define G_LDT_SRICTRL_BUFRELSPACE(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_BUFRELSPACE, M_LDT_SRICTRL_BUFRELSPACE) + +/* + * LDT SRI Transmit Buffer Count register (Table 8-26) + */ + +#define S_LDT_TXBUFCNT_PCMD 0 +#define M_LDT_TXBUFCNT_PCMD _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_PCMD) +#define V_LDT_TXBUFCNT_PCMD(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_PCMD) +#define G_LDT_TXBUFCNT_PCMD(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_PCMD, M_LDT_TXBUFCNT_PCMD) + +#define S_LDT_TXBUFCNT_PDATA 4 +#define M_LDT_TXBUFCNT_PDATA _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_PDATA) +#define V_LDT_TXBUFCNT_PDATA(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_PDATA) +#define G_LDT_TXBUFCNT_PDATA(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_PDATA, M_LDT_TXBUFCNT_PDATA) + +#define S_LDT_TXBUFCNT_NPCMD 8 +#define M_LDT_TXBUFCNT_NPCMD _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_NPCMD) +#define V_LDT_TXBUFCNT_NPCMD(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_NPCMD) +#define G_LDT_TXBUFCNT_NPCMD(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_NPCMD, M_LDT_TXBUFCNT_NPCMD) + +#define S_LDT_TXBUFCNT_NPDATA 12 +#define M_LDT_TXBUFCNT_NPDATA _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_NPDATA) +#define V_LDT_TXBUFCNT_NPDATA(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_NPDATA) +#define G_LDT_TXBUFCNT_NPDATA(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_NPDATA, M_LDT_TXBUFCNT_NPDATA) + +#define S_LDT_TXBUFCNT_RCMD 16 +#define M_LDT_TXBUFCNT_RCMD _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_RCMD) +#define V_LDT_TXBUFCNT_RCMD(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_RCMD) +#define G_LDT_TXBUFCNT_RCMD(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_RCMD, M_LDT_TXBUFCNT_RCMD) + +#define S_LDT_TXBUFCNT_RDATA 20 +#define M_LDT_TXBUFCNT_RDATA _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_RDATA) +#define V_LDT_TXBUFCNT_RDATA(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_RDATA) +#define G_LDT_TXBUFCNT_RDATA(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_RDATA, M_LDT_TXBUFCNT_RDATA) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +/* + * Additional Status Register + */ + +#define S_LDT_ADDSTATUS_TGTDONE 0 +#define M_LDT_ADDSTATUS_TGTDONE _SB_MAKEMASK_32(8, S_LDT_ADDSTATUS_TGTDONE) +#define V_LDT_ADDSTATUS_TGTDONE(x) _SB_MAKEVALUE_32(x, S_LDT_ADDSTATUS_TGTDONE) +#define G_LDT_ADDSTATUS_TGTDONE(x) _SB_GETVALUE_32(x, S_LDT_ADDSTATUS_TGTDONE, M_LDT_ADDSTATUS_TGTDONE) +#endif /* 1250 PASS2 || 112x PASS1 */ + +#endif + diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h new file mode 100644 index 000000000000..b6faf08ca81d --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_mac.h @@ -0,0 +1,656 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * MAC constants and macros File: sb1250_mac.h + * + * This module contains constants and macros for the SB1250's + * ethernet controllers. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_MAC_H +#define _SB1250_MAC_H + +#include "sb1250_defs.h" + +/* ********************************************************************* + * Ethernet MAC Registers + ********************************************************************* */ + +/* + * MAC Configuration Register (Table 9-13) + * Register: MAC_CFG_0 + * Register: MAC_CFG_1 + * Register: MAC_CFG_2 + */ + + +#define M_MAC_RESERVED0 _SB_MAKEMASK1(0) +#define M_MAC_TX_HOLD_SOP_EN _SB_MAKEMASK1(1) +#define M_MAC_RETRY_EN _SB_MAKEMASK1(2) +#define M_MAC_RET_DRPREQ_EN _SB_MAKEMASK1(3) +#define M_MAC_RET_UFL_EN _SB_MAKEMASK1(4) +#define M_MAC_BURST_EN _SB_MAKEMASK1(5) + +#define S_MAC_TX_PAUSE _SB_MAKE64(6) +#define M_MAC_TX_PAUSE_CNT _SB_MAKEMASK(3, S_MAC_TX_PAUSE) +#define V_MAC_TX_PAUSE_CNT(x) _SB_MAKEVALUE(x, S_MAC_TX_PAUSE) + +#define K_MAC_TX_PAUSE_CNT_512 0 +#define K_MAC_TX_PAUSE_CNT_1K 1 +#define K_MAC_TX_PAUSE_CNT_2K 2 +#define K_MAC_TX_PAUSE_CNT_4K 3 +#define K_MAC_TX_PAUSE_CNT_8K 4 +#define K_MAC_TX_PAUSE_CNT_16K 5 +#define K_MAC_TX_PAUSE_CNT_32K 6 +#define K_MAC_TX_PAUSE_CNT_64K 7 + +#define V_MAC_TX_PAUSE_CNT_512 V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_512) +#define V_MAC_TX_PAUSE_CNT_1K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_1K) +#define V_MAC_TX_PAUSE_CNT_2K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_2K) +#define V_MAC_TX_PAUSE_CNT_4K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_4K) +#define V_MAC_TX_PAUSE_CNT_8K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_8K) +#define V_MAC_TX_PAUSE_CNT_16K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_16K) +#define V_MAC_TX_PAUSE_CNT_32K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_32K) +#define V_MAC_TX_PAUSE_CNT_64K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_64K) + +#define M_MAC_RESERVED1 _SB_MAKEMASK(8, 9) + +#define M_MAC_AP_STAT_EN _SB_MAKEMASK1(17) + +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_TIMESTAMP _SB_MAKEMASK1(18) +#endif +#define M_MAC_DRP_ERRPKT_EN _SB_MAKEMASK1(19) +#define M_MAC_DRP_FCSERRPKT_EN _SB_MAKEMASK1(20) +#define M_MAC_DRP_CODEERRPKT_EN _SB_MAKEMASK1(21) +#define M_MAC_DRP_DRBLERRPKT_EN _SB_MAKEMASK1(22) +#define M_MAC_DRP_RNTPKT_EN _SB_MAKEMASK1(23) +#define M_MAC_DRP_OSZPKT_EN _SB_MAKEMASK1(24) +#define M_MAC_DRP_LENERRPKT_EN _SB_MAKEMASK1(25) + +#define M_MAC_RESERVED3 _SB_MAKEMASK(6, 26) + +#define M_MAC_BYPASS_SEL _SB_MAKEMASK1(32) +#define M_MAC_HDX_EN _SB_MAKEMASK1(33) + +#define S_MAC_SPEED_SEL _SB_MAKE64(34) +#define M_MAC_SPEED_SEL _SB_MAKEMASK(2, S_MAC_SPEED_SEL) +#define V_MAC_SPEED_SEL(x) _SB_MAKEVALUE(x, S_MAC_SPEED_SEL) +#define G_MAC_SPEED_SEL(x) _SB_GETVALUE(x, S_MAC_SPEED_SEL, M_MAC_SPEED_SEL) + +#define K_MAC_SPEED_SEL_10MBPS 0 +#define K_MAC_SPEED_SEL_100MBPS 1 +#define K_MAC_SPEED_SEL_1000MBPS 2 +#define K_MAC_SPEED_SEL_RESERVED 3 + +#define V_MAC_SPEED_SEL_10MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_10MBPS) +#define V_MAC_SPEED_SEL_100MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_100MBPS) +#define V_MAC_SPEED_SEL_1000MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_1000MBPS) +#define V_MAC_SPEED_SEL_RESERVED V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_RESERVED) + +#define M_MAC_TX_CLK_EDGE_SEL _SB_MAKEMASK1(36) +#define M_MAC_LOOPBACK_SEL _SB_MAKEMASK1(37) +#define M_MAC_FAST_SYNC _SB_MAKEMASK1(38) +#define M_MAC_SS_EN _SB_MAKEMASK1(39) + +#define S_MAC_BYPASS_CFG _SB_MAKE64(40) +#define M_MAC_BYPASS_CFG _SB_MAKEMASK(2, S_MAC_BYPASS_CFG) +#define V_MAC_BYPASS_CFG(x) _SB_MAKEVALUE(x, S_MAC_BYPASS_CFG) +#define G_MAC_BYPASS_CFG(x) _SB_GETVALUE(x, S_MAC_BYPASS_CFG, M_MAC_BYPASS_CFG) + +#define K_MAC_BYPASS_GMII 0 +#define K_MAC_BYPASS_ENCODED 1 +#define K_MAC_BYPASS_SOP 2 +#define K_MAC_BYPASS_EOP 3 + +#define M_MAC_BYPASS_16 _SB_MAKEMASK1(42) +#define M_MAC_BYPASS_FCS_CHK _SB_MAKEMASK1(43) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_RX_CH_SEL_MSB _SB_MAKEMASK1(44) +#endif /* 1250 PASS2 || 112x PASS1 || 1480*/ + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_SPLIT_CH_SEL _SB_MAKEMASK1(45) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define S_MAC_BYPASS_IFG _SB_MAKE64(46) +#define M_MAC_BYPASS_IFG _SB_MAKEMASK(8, S_MAC_BYPASS_IFG) +#define V_MAC_BYPASS_IFG(x) _SB_MAKEVALUE(x, S_MAC_BYPASS_IFG) +#define G_MAC_BYPASS_IFG(x) _SB_GETVALUE(x, S_MAC_BYPASS_IFG, M_MAC_BYPASS_IFG) + +#define K_MAC_FC_CMD_DISABLED 0 +#define K_MAC_FC_CMD_ENABLED 1 +#define K_MAC_FC_CMD_ENAB_FALSECARR 2 + +#define V_MAC_FC_CMD_DISABLED V_MAC_FC_CMD(K_MAC_FC_CMD_DISABLED) +#define V_MAC_FC_CMD_ENABLED V_MAC_FC_CMD(K_MAC_FC_CMD_ENABLED) +#define V_MAC_FC_CMD_ENAB_FALSECARR V_MAC_FC_CMD(K_MAC_FC_CMD_ENAB_FALSECARR) + +#define M_MAC_FC_SEL _SB_MAKEMASK1(54) + +#define S_MAC_FC_CMD _SB_MAKE64(55) +#define M_MAC_FC_CMD _SB_MAKEMASK(2, S_MAC_FC_CMD) +#define V_MAC_FC_CMD(x) _SB_MAKEVALUE(x, S_MAC_FC_CMD) +#define G_MAC_FC_CMD(x) _SB_GETVALUE(x, S_MAC_FC_CMD, M_MAC_FC_CMD) + +#define S_MAC_RX_CH_SEL _SB_MAKE64(57) +#define M_MAC_RX_CH_SEL _SB_MAKEMASK(7, S_MAC_RX_CH_SEL) +#define V_MAC_RX_CH_SEL(x) _SB_MAKEVALUE(x, S_MAC_RX_CH_SEL) +#define G_MAC_RX_CH_SEL(x) _SB_GETVALUE(x, S_MAC_RX_CH_SEL, M_MAC_RX_CH_SEL) + + +/* + * MAC Enable Registers + * Register: MAC_ENABLE_0 + * Register: MAC_ENABLE_1 + * Register: MAC_ENABLE_2 + */ + +#define M_MAC_RXDMA_EN0 _SB_MAKEMASK1(0) +#define M_MAC_RXDMA_EN1 _SB_MAKEMASK1(1) +#define M_MAC_TXDMA_EN0 _SB_MAKEMASK1(4) +#define M_MAC_TXDMA_EN1 _SB_MAKEMASK1(5) + +#define M_MAC_PORT_RESET _SB_MAKEMASK1(8) + +#if (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x)) +#define M_MAC_RX_ENABLE _SB_MAKEMASK1(10) +#define M_MAC_TX_ENABLE _SB_MAKEMASK1(11) +#define M_MAC_BYP_RX_ENABLE _SB_MAKEMASK1(12) +#define M_MAC_BYP_TX_ENABLE _SB_MAKEMASK1(13) +#endif + +/* + * MAC reset information register (1280/1255) + */ +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_RX_CH0_PAUSE_ON _SB_MAKEMASK1(8) +#define M_MAC_RX_CH1_PAUSE_ON _SB_MAKEMASK1(16) +#define M_MAC_TX_CH0_PAUSE_ON _SB_MAKEMASK1(24) +#define M_MAC_TX_CH1_PAUSE_ON _SB_MAKEMASK1(32) +#endif + +/* + * MAC DMA Control Register + * Register: MAC_TXD_CTL_0 + * Register: MAC_TXD_CTL_1 + * Register: MAC_TXD_CTL_2 + */ + +#define S_MAC_TXD_WEIGHT0 _SB_MAKE64(0) +#define M_MAC_TXD_WEIGHT0 _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT0) +#define V_MAC_TXD_WEIGHT0(x) _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT0) +#define G_MAC_TXD_WEIGHT0(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT0, M_MAC_TXD_WEIGHT0) + +#define S_MAC_TXD_WEIGHT1 _SB_MAKE64(4) +#define M_MAC_TXD_WEIGHT1 _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT1) +#define V_MAC_TXD_WEIGHT1(x) _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT1) +#define G_MAC_TXD_WEIGHT1(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1) + +/* + * MAC Fifo Threshhold registers (Table 9-14) + * Register: MAC_THRSH_CFG_0 + * Register: MAC_THRSH_CFG_1 + * Register: MAC_THRSH_CFG_2 + */ + +#define S_MAC_TX_WR_THRSH _SB_MAKE64(0) +#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) +/* XXX: Can't enable, as it has the same name as a pass2+ define below. */ +/* #define M_MAC_TX_WR_THRSH _SB_MAKEMASK(6, S_MAC_TX_WR_THRSH) */ +#endif /* up to 1250 PASS1 */ +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_TX_WR_THRSH _SB_MAKEMASK(7, S_MAC_TX_WR_THRSH) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ +#define V_MAC_TX_WR_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_WR_THRSH) +#define G_MAC_TX_WR_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_WR_THRSH, M_MAC_TX_WR_THRSH) + +#define S_MAC_TX_RD_THRSH _SB_MAKE64(8) +#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) +/* XXX: Can't enable, as it has the same name as a pass2+ define below. */ +/* #define M_MAC_TX_RD_THRSH _SB_MAKEMASK(6, S_MAC_TX_RD_THRSH) */ +#endif /* up to 1250 PASS1 */ +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_TX_RD_THRSH _SB_MAKEMASK(7, S_MAC_TX_RD_THRSH) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ +#define V_MAC_TX_RD_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_RD_THRSH) +#define G_MAC_TX_RD_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_RD_THRSH, M_MAC_TX_RD_THRSH) + +#define S_MAC_TX_RL_THRSH _SB_MAKE64(16) +#define M_MAC_TX_RL_THRSH _SB_MAKEMASK(4, S_MAC_TX_RL_THRSH) +#define V_MAC_TX_RL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_RL_THRSH) +#define G_MAC_TX_RL_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_RL_THRSH, M_MAC_TX_RL_THRSH) + +#define S_MAC_RX_PL_THRSH _SB_MAKE64(24) +#define M_MAC_RX_PL_THRSH _SB_MAKEMASK(6, S_MAC_RX_PL_THRSH) +#define V_MAC_RX_PL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_PL_THRSH) +#define G_MAC_RX_PL_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_PL_THRSH, M_MAC_RX_PL_THRSH) + +#define S_MAC_RX_RD_THRSH _SB_MAKE64(32) +#define M_MAC_RX_RD_THRSH _SB_MAKEMASK(6, S_MAC_RX_RD_THRSH) +#define V_MAC_RX_RD_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_RD_THRSH) +#define G_MAC_RX_RD_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_RD_THRSH, M_MAC_RX_RD_THRSH) + +#define S_MAC_RX_RL_THRSH _SB_MAKE64(40) +#define M_MAC_RX_RL_THRSH _SB_MAKEMASK(6, S_MAC_RX_RL_THRSH) +#define V_MAC_RX_RL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_RL_THRSH) +#define G_MAC_RX_RL_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_RL_THRSH, M_MAC_RX_RL_THRSH) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_MAC_ENC_FC_THRSH _SB_MAKE64(56) +#define M_MAC_ENC_FC_THRSH _SB_MAKEMASK(6, S_MAC_ENC_FC_THRSH) +#define V_MAC_ENC_FC_THRSH(x) _SB_MAKEVALUE(x, S_MAC_ENC_FC_THRSH) +#define G_MAC_ENC_FC_THRSH(x) _SB_GETVALUE(x, S_MAC_ENC_FC_THRSH, M_MAC_ENC_FC_THRSH) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +/* + * MAC Frame Configuration Registers (Table 9-15) + * Register: MAC_FRAME_CFG_0 + * Register: MAC_FRAME_CFG_1 + * Register: MAC_FRAME_CFG_2 + */ + +/* XXXCGD: ??? Unused in pass2? */ +#define S_MAC_IFG_RX _SB_MAKE64(0) +#define M_MAC_IFG_RX _SB_MAKEMASK(6, S_MAC_IFG_RX) +#define V_MAC_IFG_RX(x) _SB_MAKEVALUE(x, S_MAC_IFG_RX) +#define G_MAC_IFG_RX(x) _SB_GETVALUE(x, S_MAC_IFG_RX, M_MAC_IFG_RX) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_MAC_PRE_LEN _SB_MAKE64(0) +#define M_MAC_PRE_LEN _SB_MAKEMASK(6, S_MAC_PRE_LEN) +#define V_MAC_PRE_LEN(x) _SB_MAKEVALUE(x, S_MAC_PRE_LEN) +#define G_MAC_PRE_LEN(x) _SB_GETVALUE(x, S_MAC_PRE_LEN, M_MAC_PRE_LEN) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define S_MAC_IFG_TX _SB_MAKE64(6) +#define M_MAC_IFG_TX _SB_MAKEMASK(6, S_MAC_IFG_TX) +#define V_MAC_IFG_TX(x) _SB_MAKEVALUE(x, S_MAC_IFG_TX) +#define G_MAC_IFG_TX(x) _SB_GETVALUE(x, S_MAC_IFG_TX, M_MAC_IFG_TX) + +#define S_MAC_IFG_THRSH _SB_MAKE64(12) +#define M_MAC_IFG_THRSH _SB_MAKEMASK(6, S_MAC_IFG_THRSH) +#define V_MAC_IFG_THRSH(x) _SB_MAKEVALUE(x, S_MAC_IFG_THRSH) +#define G_MAC_IFG_THRSH(x) _SB_GETVALUE(x, S_MAC_IFG_THRSH, M_MAC_IFG_THRSH) + +#define S_MAC_BACKOFF_SEL _SB_MAKE64(18) +#define M_MAC_BACKOFF_SEL _SB_MAKEMASK(4, S_MAC_BACKOFF_SEL) +#define V_MAC_BACKOFF_SEL(x) _SB_MAKEVALUE(x, S_MAC_BACKOFF_SEL) +#define G_MAC_BACKOFF_SEL(x) _SB_GETVALUE(x, S_MAC_BACKOFF_SEL, M_MAC_BACKOFF_SEL) + +#define S_MAC_LFSR_SEED _SB_MAKE64(22) +#define M_MAC_LFSR_SEED _SB_MAKEMASK(8, S_MAC_LFSR_SEED) +#define V_MAC_LFSR_SEED(x) _SB_MAKEVALUE(x, S_MAC_LFSR_SEED) +#define G_MAC_LFSR_SEED(x) _SB_GETVALUE(x, S_MAC_LFSR_SEED, M_MAC_LFSR_SEED) + +#define S_MAC_SLOT_SIZE _SB_MAKE64(30) +#define M_MAC_SLOT_SIZE _SB_MAKEMASK(10, S_MAC_SLOT_SIZE) +#define V_MAC_SLOT_SIZE(x) _SB_MAKEVALUE(x, S_MAC_SLOT_SIZE) +#define G_MAC_SLOT_SIZE(x) _SB_GETVALUE(x, S_MAC_SLOT_SIZE, M_MAC_SLOT_SIZE) + +#define S_MAC_MIN_FRAMESZ _SB_MAKE64(40) +#define M_MAC_MIN_FRAMESZ _SB_MAKEMASK(8, S_MAC_MIN_FRAMESZ) +#define V_MAC_MIN_FRAMESZ(x) _SB_MAKEVALUE(x, S_MAC_MIN_FRAMESZ) +#define G_MAC_MIN_FRAMESZ(x) _SB_GETVALUE(x, S_MAC_MIN_FRAMESZ, M_MAC_MIN_FRAMESZ) + +#define S_MAC_MAX_FRAMESZ _SB_MAKE64(48) +#define M_MAC_MAX_FRAMESZ _SB_MAKEMASK(16, S_MAC_MAX_FRAMESZ) +#define V_MAC_MAX_FRAMESZ(x) _SB_MAKEVALUE(x, S_MAC_MAX_FRAMESZ) +#define G_MAC_MAX_FRAMESZ(x) _SB_GETVALUE(x, S_MAC_MAX_FRAMESZ, M_MAC_MAX_FRAMESZ) + +/* + * These constants are used to configure the fields within the Frame + * Configuration Register. + */ + +#define K_MAC_IFG_RX_10 _SB_MAKE64(0) /* See table 176, not used */ +#define K_MAC_IFG_RX_100 _SB_MAKE64(0) +#define K_MAC_IFG_RX_1000 _SB_MAKE64(0) + +#define K_MAC_IFG_TX_10 _SB_MAKE64(20) +#define K_MAC_IFG_TX_100 _SB_MAKE64(20) +#define K_MAC_IFG_TX_1000 _SB_MAKE64(8) + +#define K_MAC_IFG_THRSH_10 _SB_MAKE64(4) +#define K_MAC_IFG_THRSH_100 _SB_MAKE64(4) +#define K_MAC_IFG_THRSH_1000 _SB_MAKE64(0) + +#define K_MAC_SLOT_SIZE_10 _SB_MAKE64(0) +#define K_MAC_SLOT_SIZE_100 _SB_MAKE64(0) +#define K_MAC_SLOT_SIZE_1000 _SB_MAKE64(0) + +#define V_MAC_IFG_RX_10 V_MAC_IFG_RX(K_MAC_IFG_RX_10) +#define V_MAC_IFG_RX_100 V_MAC_IFG_RX(K_MAC_IFG_RX_100) +#define V_MAC_IFG_RX_1000 V_MAC_IFG_RX(K_MAC_IFG_RX_1000) + +#define V_MAC_IFG_TX_10 V_MAC_IFG_TX(K_MAC_IFG_TX_10) +#define V_MAC_IFG_TX_100 V_MAC_IFG_TX(K_MAC_IFG_TX_100) +#define V_MAC_IFG_TX_1000 V_MAC_IFG_TX(K_MAC_IFG_TX_1000) + +#define V_MAC_IFG_THRSH_10 V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_10) +#define V_MAC_IFG_THRSH_100 V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_100) +#define V_MAC_IFG_THRSH_1000 V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_1000) + +#define V_MAC_SLOT_SIZE_10 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_10) +#define V_MAC_SLOT_SIZE_100 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_100) +#define V_MAC_SLOT_SIZE_1000 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_1000) + +#define K_MAC_MIN_FRAMESZ_FIFO _SB_MAKE64(9) +#define K_MAC_MIN_FRAMESZ_DEFAULT _SB_MAKE64(64) +#define K_MAC_MAX_FRAMESZ_DEFAULT _SB_MAKE64(1518) +#define K_MAC_MAX_FRAMESZ_JUMBO _SB_MAKE64(9216) + +#define V_MAC_MIN_FRAMESZ_FIFO V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_FIFO) +#define V_MAC_MIN_FRAMESZ_DEFAULT V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_DEFAULT) +#define V_MAC_MAX_FRAMESZ_DEFAULT V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_DEFAULT) +#define V_MAC_MAX_FRAMESZ_JUMBO V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_JUMBO) + +/* + * MAC VLAN Tag Registers (Table 9-16) + * Register: MAC_VLANTAG_0 + * Register: MAC_VLANTAG_1 + * Register: MAC_VLANTAG_2 + */ + +#define S_MAC_VLAN_TAG _SB_MAKE64(0) +#define M_MAC_VLAN_TAG _SB_MAKEMASK(32, S_MAC_VLAN_TAG) +#define V_MAC_VLAN_TAG(x) _SB_MAKEVALUE(x, S_MAC_VLAN_TAG) +#define G_MAC_VLAN_TAG(x) _SB_GETVALUE(x, S_MAC_VLAN_TAG, M_MAC_VLAN_TAG) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define S_MAC_TX_PKT_OFFSET _SB_MAKE64(32) +#define M_MAC_TX_PKT_OFFSET _SB_MAKEMASK(8, S_MAC_TX_PKT_OFFSET) +#define V_MAC_TX_PKT_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_TX_PKT_OFFSET) +#define G_MAC_TX_PKT_OFFSET(x) _SB_GETVALUE(x, S_MAC_TX_PKT_OFFSET, M_MAC_TX_PKT_OFFSET) + +#define S_MAC_TX_CRC_OFFSET _SB_MAKE64(40) +#define M_MAC_TX_CRC_OFFSET _SB_MAKEMASK(8, S_MAC_TX_CRC_OFFSET) +#define V_MAC_TX_CRC_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_TX_CRC_OFFSET) +#define G_MAC_TX_CRC_OFFSET(x) _SB_GETVALUE(x, S_MAC_TX_CRC_OFFSET, M_MAC_TX_CRC_OFFSET) + +#define M_MAC_CH_BASE_FC_EN _SB_MAKEMASK1(48) +#endif /* 1250 PASS3 || 112x PASS1 */ + +/* + * MAC Status Registers (Table 9-17) + * Also used for the MAC Interrupt Mask Register (Table 9-18) + * Register: MAC_STATUS_0 + * Register: MAC_STATUS_1 + * Register: MAC_STATUS_2 + * Register: MAC_INT_MASK_0 + * Register: MAC_INT_MASK_1 + * Register: MAC_INT_MASK_2 + */ + +/* + * Use these constants to shift the appropriate channel + * into the CH0 position so the same tests can be used + * on each channel. + */ + +#define S_MAC_RX_CH0 _SB_MAKE64(0) +#define S_MAC_RX_CH1 _SB_MAKE64(8) +#define S_MAC_TX_CH0 _SB_MAKE64(16) +#define S_MAC_TX_CH1 _SB_MAKE64(24) + +#define S_MAC_TXCHANNELS _SB_MAKE64(16) /* this is 1st TX chan */ +#define S_MAC_CHANWIDTH _SB_MAKE64(8) /* bits between channels */ + +/* + * These are the same as RX channel 0. The idea here + * is that you'll use one of the "S_" things above + * and pass just the six bits to a DMA-channel-specific ISR + */ +#define M_MAC_INT_CHANNEL _SB_MAKEMASK(8, 0) +#define M_MAC_INT_EOP_COUNT _SB_MAKEMASK1(0) +#define M_MAC_INT_EOP_TIMER _SB_MAKEMASK1(1) +#define M_MAC_INT_EOP_SEEN _SB_MAKEMASK1(2) +#define M_MAC_INT_HWM _SB_MAKEMASK1(3) +#define M_MAC_INT_LWM _SB_MAKEMASK1(4) +#define M_MAC_INT_DSCR _SB_MAKEMASK1(5) +#define M_MAC_INT_ERR _SB_MAKEMASK1(6) +#define M_MAC_INT_DZERO _SB_MAKEMASK1(7) /* only for TX channels */ +#define M_MAC_INT_DROP _SB_MAKEMASK1(7) /* only for RX channels */ + +/* + * In the following definitions we use ch (0/1) and txrx (TX=1, RX=0, see + * also DMA_TX/DMA_RX in sb_regs.h). + */ +#define S_MAC_STATUS_CH_OFFSET(ch, txrx) _SB_MAKE64(((ch) + 2 * (txrx)) * S_MAC_CHANWIDTH) + +#define M_MAC_STATUS_CHANNEL(ch, txrx) _SB_MAKEVALUE(_SB_MAKEMASK(8, 0), S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_EOP_COUNT(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_COUNT, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_EOP_TIMER(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_TIMER, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_EOP_SEEN(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_SEEN, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_HWM(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_HWM, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_LWM(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_LWM, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_DSCR(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DSCR, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_ERR(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_ERR, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_DZERO(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DZERO, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_DROP(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DROP, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_OTHER_ERR _SB_MAKEVALUE(_SB_MAKEMASK(7, 0), 40) + + +#define M_MAC_RX_UNDRFL _SB_MAKEMASK1(40) +#define M_MAC_RX_OVRFL _SB_MAKEMASK1(41) +#define M_MAC_TX_UNDRFL _SB_MAKEMASK1(42) +#define M_MAC_TX_OVRFL _SB_MAKEMASK1(43) +#define M_MAC_LTCOL_ERR _SB_MAKEMASK1(44) +#define M_MAC_EXCOL_ERR _SB_MAKEMASK1(45) +#define M_MAC_CNTR_OVRFL_ERR _SB_MAKEMASK1(46) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_SPLIT_EN _SB_MAKEMASK1(47) /* interrupt mask only */ +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#define S_MAC_COUNTER_ADDR _SB_MAKE64(47) +#define M_MAC_COUNTER_ADDR _SB_MAKEMASK(5, S_MAC_COUNTER_ADDR) +#define V_MAC_COUNTER_ADDR(x) _SB_MAKEVALUE(x, S_MAC_COUNTER_ADDR) +#define G_MAC_COUNTER_ADDR(x) _SB_GETVALUE(x, S_MAC_COUNTER_ADDR, M_MAC_COUNTER_ADDR) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_TX_PAUSE_ON _SB_MAKEMASK1(52) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +/* + * MAC Fifo Pointer Registers (Table 9-19) [Debug register] + * Register: MAC_FIFO_PTRS_0 + * Register: MAC_FIFO_PTRS_1 + * Register: MAC_FIFO_PTRS_2 + */ + +#define S_MAC_TX_WRPTR _SB_MAKE64(0) +#define M_MAC_TX_WRPTR _SB_MAKEMASK(6, S_MAC_TX_WRPTR) +#define V_MAC_TX_WRPTR(x) _SB_MAKEVALUE(x, S_MAC_TX_WRPTR) +#define G_MAC_TX_WRPTR(x) _SB_GETVALUE(x, S_MAC_TX_WRPTR, M_MAC_TX_WRPTR) + +#define S_MAC_TX_RDPTR _SB_MAKE64(8) +#define M_MAC_TX_RDPTR _SB_MAKEMASK(6, S_MAC_TX_RDPTR) +#define V_MAC_TX_RDPTR(x) _SB_MAKEVALUE(x, S_MAC_TX_RDPTR) +#define G_MAC_TX_RDPTR(x) _SB_GETVALUE(x, S_MAC_TX_RDPTR, M_MAC_TX_RDPTR) + +#define S_MAC_RX_WRPTR _SB_MAKE64(16) +#define M_MAC_RX_WRPTR _SB_MAKEMASK(6, S_MAC_RX_WRPTR) +#define V_MAC_RX_WRPTR(x) _SB_MAKEVALUE(x, S_MAC_RX_WRPTR) +#define G_MAC_RX_WRPTR(x) _SB_GETVALUE(x, S_MAC_RX_WRPTR, M_MAC_TX_WRPTR) + +#define S_MAC_RX_RDPTR _SB_MAKE64(24) +#define M_MAC_RX_RDPTR _SB_MAKEMASK(6, S_MAC_RX_RDPTR) +#define V_MAC_RX_RDPTR(x) _SB_MAKEVALUE(x, S_MAC_RX_RDPTR) +#define G_MAC_RX_RDPTR(x) _SB_GETVALUE(x, S_MAC_RX_RDPTR, M_MAC_TX_RDPTR) + +/* + * MAC Fifo End Of Packet Count Registers (Table 9-20) [Debug register] + * Register: MAC_EOPCNT_0 + * Register: MAC_EOPCNT_1 + * Register: MAC_EOPCNT_2 + */ + +#define S_MAC_TX_EOP_COUNTER _SB_MAKE64(0) +#define M_MAC_TX_EOP_COUNTER _SB_MAKEMASK(6, S_MAC_TX_EOP_COUNTER) +#define V_MAC_TX_EOP_COUNTER(x) _SB_MAKEVALUE(x, S_MAC_TX_EOP_COUNTER) +#define G_MAC_TX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_TX_EOP_COUNTER, M_MAC_TX_EOP_COUNTER) + +#define S_MAC_RX_EOP_COUNTER _SB_MAKE64(8) +#define M_MAC_RX_EOP_COUNTER _SB_MAKEMASK(6, S_MAC_RX_EOP_COUNTER) +#define V_MAC_RX_EOP_COUNTER(x) _SB_MAKEVALUE(x, S_MAC_RX_EOP_COUNTER) +#define G_MAC_RX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER) + +/* + * MAC Recieve Address Filter Exact Match Registers (Table 9-21) + * Registers: MAC_ADDR0_0 through MAC_ADDR7_0 + * Registers: MAC_ADDR0_1 through MAC_ADDR7_1 + * Registers: MAC_ADDR0_2 through MAC_ADDR7_2 + */ + +/* No bitfields */ + +/* + * MAC Receive Address Filter Mask Registers + * Registers: MAC_ADDRMASK0_0 and MAC_ADDRMASK0_1 + * Registers: MAC_ADDRMASK1_0 and MAC_ADDRMASK1_1 + * Registers: MAC_ADDRMASK2_0 and MAC_ADDRMASK2_1 + */ + +/* No bitfields */ + +/* + * MAC Recieve Address Filter Hash Match Registers (Table 9-22) + * Registers: MAC_HASH0_0 through MAC_HASH7_0 + * Registers: MAC_HASH0_1 through MAC_HASH7_1 + * Registers: MAC_HASH0_2 through MAC_HASH7_2 + */ + +/* No bitfields */ + +/* + * MAC Transmit Source Address Registers (Table 9-23) + * Register: MAC_ETHERNET_ADDR_0 + * Register: MAC_ETHERNET_ADDR_1 + * Register: MAC_ETHERNET_ADDR_2 + */ + +/* No bitfields */ + +/* + * MAC Packet Type Configuration Register + * Register: MAC_TYPE_CFG_0 + * Register: MAC_TYPE_CFG_1 + * Register: MAC_TYPE_CFG_2 + */ + +#define S_TYPECFG_TYPESIZE _SB_MAKE64(16) + +#define S_TYPECFG_TYPE0 _SB_MAKE64(0) +#define M_TYPECFG_TYPE0 _SB_MAKEMASK(16, S_TYPECFG_TYPE0) +#define V_TYPECFG_TYPE0(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE0) +#define G_TYPECFG_TYPE0(x) _SB_GETVALUE(x, S_TYPECFG_TYPE0, M_TYPECFG_TYPE0) + +#define S_TYPECFG_TYPE1 _SB_MAKE64(0) +#define M_TYPECFG_TYPE1 _SB_MAKEMASK(16, S_TYPECFG_TYPE1) +#define V_TYPECFG_TYPE1(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE1) +#define G_TYPECFG_TYPE1(x) _SB_GETVALUE(x, S_TYPECFG_TYPE1, M_TYPECFG_TYPE1) + +#define S_TYPECFG_TYPE2 _SB_MAKE64(0) +#define M_TYPECFG_TYPE2 _SB_MAKEMASK(16, S_TYPECFG_TYPE2) +#define V_TYPECFG_TYPE2(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE2) +#define G_TYPECFG_TYPE2(x) _SB_GETVALUE(x, S_TYPECFG_TYPE2, M_TYPECFG_TYPE2) + +#define S_TYPECFG_TYPE3 _SB_MAKE64(0) +#define M_TYPECFG_TYPE3 _SB_MAKEMASK(16, S_TYPECFG_TYPE3) +#define V_TYPECFG_TYPE3(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE3) +#define G_TYPECFG_TYPE3(x) _SB_GETVALUE(x, S_TYPECFG_TYPE3, M_TYPECFG_TYPE3) + +/* + * MAC Receive Address Filter Control Registers (Table 9-24) + * Register: MAC_ADFILTER_CFG_0 + * Register: MAC_ADFILTER_CFG_1 + * Register: MAC_ADFILTER_CFG_2 + */ + +#define M_MAC_ALLPKT_EN _SB_MAKEMASK1(0) +#define M_MAC_UCAST_EN _SB_MAKEMASK1(1) +#define M_MAC_UCAST_INV _SB_MAKEMASK1(2) +#define M_MAC_MCAST_EN _SB_MAKEMASK1(3) +#define M_MAC_MCAST_INV _SB_MAKEMASK1(4) +#define M_MAC_BCAST_EN _SB_MAKEMASK1(5) +#define M_MAC_DIRECT_INV _SB_MAKEMASK1(6) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_MAC_ALLMCAST_EN _SB_MAKEMASK1(7) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#define S_MAC_IPHDR_OFFSET _SB_MAKE64(8) +#define M_MAC_IPHDR_OFFSET _SB_MAKEMASK(8, S_MAC_IPHDR_OFFSET) +#define V_MAC_IPHDR_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_IPHDR_OFFSET) +#define G_MAC_IPHDR_OFFSET(x) _SB_GETVALUE(x, S_MAC_IPHDR_OFFSET, M_MAC_IPHDR_OFFSET) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_MAC_RX_CRC_OFFSET _SB_MAKE64(16) +#define M_MAC_RX_CRC_OFFSET _SB_MAKEMASK(8, S_MAC_RX_CRC_OFFSET) +#define V_MAC_RX_CRC_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_RX_CRC_OFFSET) +#define G_MAC_RX_CRC_OFFSET(x) _SB_GETVALUE(x, S_MAC_RX_CRC_OFFSET, M_MAC_RX_CRC_OFFSET) + +#define S_MAC_RX_PKT_OFFSET _SB_MAKE64(24) +#define M_MAC_RX_PKT_OFFSET _SB_MAKEMASK(8, S_MAC_RX_PKT_OFFSET) +#define V_MAC_RX_PKT_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_RX_PKT_OFFSET) +#define G_MAC_RX_PKT_OFFSET(x) _SB_GETVALUE(x, S_MAC_RX_PKT_OFFSET, M_MAC_RX_PKT_OFFSET) + +#define M_MAC_FWDPAUSE_EN _SB_MAKEMASK1(32) +#define M_MAC_VLAN_DET_EN _SB_MAKEMASK1(33) + +#define S_MAC_RX_CH_MSN_SEL _SB_MAKE64(34) +#define M_MAC_RX_CH_MSN_SEL _SB_MAKEMASK(8, S_MAC_RX_CH_MSN_SEL) +#define V_MAC_RX_CH_MSN_SEL(x) _SB_MAKEVALUE(x, S_MAC_RX_CH_MSN_SEL) +#define G_MAC_RX_CH_MSN_SEL(x) _SB_GETVALUE(x, S_MAC_RX_CH_MSN_SEL, M_MAC_RX_CH_MSN_SEL) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +/* + * MAC Receive Channel Select Registers (Table 9-25) + */ + +/* no bitfields */ + +/* + * MAC MII Management Interface Registers (Table 9-26) + * Register: MAC_MDIO_0 + * Register: MAC_MDIO_1 + * Register: MAC_MDIO_2 + */ + +#define S_MAC_MDC 0 +#define S_MAC_MDIO_DIR 1 +#define S_MAC_MDIO_OUT 2 +#define S_MAC_GENC 3 +#define S_MAC_MDIO_IN 4 + +#define M_MAC_MDC _SB_MAKEMASK1(S_MAC_MDC) +#define M_MAC_MDIO_DIR _SB_MAKEMASK1(S_MAC_MDIO_DIR) +#define M_MAC_MDIO_DIR_INPUT _SB_MAKEMASK1(S_MAC_MDIO_DIR) +#define M_MAC_MDIO_OUT _SB_MAKEMASK1(S_MAC_MDIO_OUT) +#define M_MAC_GENC _SB_MAKEMASK1(S_MAC_GENC) +#define M_MAC_MDIO_IN _SB_MAKEMASK1(S_MAC_MDIO_IN) + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_mc.h b/arch/mips/include/asm/sibyte/sb1250_mc.h new file mode 100644 index 000000000000..1eb1b5a88736 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_mc.h @@ -0,0 +1,550 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * Memory Controller constants File: sb1250_mc.h + * + * This module contains constants and macros useful for + * programming the memory controller. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000, 2001, 2002, 2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_MC_H +#define _SB1250_MC_H + +#include "sb1250_defs.h" + +/* + * Memory Channel Config Register (table 6-14) + */ + +#define S_MC_RESERVED0 0 +#define M_MC_RESERVED0 _SB_MAKEMASK(8, S_MC_RESERVED0) + +#define S_MC_CHANNEL_SEL 8 +#define M_MC_CHANNEL_SEL _SB_MAKEMASK(8, S_MC_CHANNEL_SEL) +#define V_MC_CHANNEL_SEL(x) _SB_MAKEVALUE(x, S_MC_CHANNEL_SEL) +#define G_MC_CHANNEL_SEL(x) _SB_GETVALUE(x, S_MC_CHANNEL_SEL, M_MC_CHANNEL_SEL) + +#define S_MC_BANK0_MAP 16 +#define M_MC_BANK0_MAP _SB_MAKEMASK(4, S_MC_BANK0_MAP) +#define V_MC_BANK0_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK0_MAP) +#define G_MC_BANK0_MAP(x) _SB_GETVALUE(x, S_MC_BANK0_MAP, M_MC_BANK0_MAP) + +#define K_MC_BANK0_MAP_DEFAULT 0x00 +#define V_MC_BANK0_MAP_DEFAULT V_MC_BANK0_MAP(K_MC_BANK0_MAP_DEFAULT) + +#define S_MC_BANK1_MAP 20 +#define M_MC_BANK1_MAP _SB_MAKEMASK(4, S_MC_BANK1_MAP) +#define V_MC_BANK1_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK1_MAP) +#define G_MC_BANK1_MAP(x) _SB_GETVALUE(x, S_MC_BANK1_MAP, M_MC_BANK1_MAP) + +#define K_MC_BANK1_MAP_DEFAULT 0x08 +#define V_MC_BANK1_MAP_DEFAULT V_MC_BANK1_MAP(K_MC_BANK1_MAP_DEFAULT) + +#define S_MC_BANK2_MAP 24 +#define M_MC_BANK2_MAP _SB_MAKEMASK(4, S_MC_BANK2_MAP) +#define V_MC_BANK2_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK2_MAP) +#define G_MC_BANK2_MAP(x) _SB_GETVALUE(x, S_MC_BANK2_MAP, M_MC_BANK2_MAP) + +#define K_MC_BANK2_MAP_DEFAULT 0x09 +#define V_MC_BANK2_MAP_DEFAULT V_MC_BANK2_MAP(K_MC_BANK2_MAP_DEFAULT) + +#define S_MC_BANK3_MAP 28 +#define M_MC_BANK3_MAP _SB_MAKEMASK(4, S_MC_BANK3_MAP) +#define V_MC_BANK3_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK3_MAP) +#define G_MC_BANK3_MAP(x) _SB_GETVALUE(x, S_MC_BANK3_MAP, M_MC_BANK3_MAP) + +#define K_MC_BANK3_MAP_DEFAULT 0x0C +#define V_MC_BANK3_MAP_DEFAULT V_MC_BANK3_MAP(K_MC_BANK3_MAP_DEFAULT) + +#define M_MC_RESERVED1 _SB_MAKEMASK(8, 32) + +#define S_MC_QUEUE_SIZE 40 +#define M_MC_QUEUE_SIZE _SB_MAKEMASK(4, S_MC_QUEUE_SIZE) +#define V_MC_QUEUE_SIZE(x) _SB_MAKEVALUE(x, S_MC_QUEUE_SIZE) +#define G_MC_QUEUE_SIZE(x) _SB_GETVALUE(x, S_MC_QUEUE_SIZE, M_MC_QUEUE_SIZE) +#define V_MC_QUEUE_SIZE_DEFAULT V_MC_QUEUE_SIZE(0x0A) + +#define S_MC_AGE_LIMIT 44 +#define M_MC_AGE_LIMIT _SB_MAKEMASK(4, S_MC_AGE_LIMIT) +#define V_MC_AGE_LIMIT(x) _SB_MAKEVALUE(x, S_MC_AGE_LIMIT) +#define G_MC_AGE_LIMIT(x) _SB_GETVALUE(x, S_MC_AGE_LIMIT, M_MC_AGE_LIMIT) +#define V_MC_AGE_LIMIT_DEFAULT V_MC_AGE_LIMIT(8) + +#define S_MC_WR_LIMIT 48 +#define M_MC_WR_LIMIT _SB_MAKEMASK(4, S_MC_WR_LIMIT) +#define V_MC_WR_LIMIT(x) _SB_MAKEVALUE(x, S_MC_WR_LIMIT) +#define G_MC_WR_LIMIT(x) _SB_GETVALUE(x, S_MC_WR_LIMIT, M_MC_WR_LIMIT) +#define V_MC_WR_LIMIT_DEFAULT V_MC_WR_LIMIT(5) + +#define M_MC_IOB1HIGHPRIORITY _SB_MAKEMASK1(52) + +#define M_MC_RESERVED2 _SB_MAKEMASK(3, 53) + +#define S_MC_CS_MODE 56 +#define M_MC_CS_MODE _SB_MAKEMASK(4, S_MC_CS_MODE) +#define V_MC_CS_MODE(x) _SB_MAKEVALUE(x, S_MC_CS_MODE) +#define G_MC_CS_MODE(x) _SB_GETVALUE(x, S_MC_CS_MODE, M_MC_CS_MODE) + +#define K_MC_CS_MODE_MSB_CS 0 +#define K_MC_CS_MODE_INTLV_CS 15 +#define K_MC_CS_MODE_MIXED_CS_10 12 +#define K_MC_CS_MODE_MIXED_CS_30 6 +#define K_MC_CS_MODE_MIXED_CS_32 3 + +#define V_MC_CS_MODE_MSB_CS V_MC_CS_MODE(K_MC_CS_MODE_MSB_CS) +#define V_MC_CS_MODE_INTLV_CS V_MC_CS_MODE(K_MC_CS_MODE_INTLV_CS) +#define V_MC_CS_MODE_MIXED_CS_10 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_10) +#define V_MC_CS_MODE_MIXED_CS_30 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_30) +#define V_MC_CS_MODE_MIXED_CS_32 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_32) + +#define M_MC_ECC_DISABLE _SB_MAKEMASK1(60) +#define M_MC_BERR_DISABLE _SB_MAKEMASK1(61) +#define M_MC_FORCE_SEQ _SB_MAKEMASK1(62) +#define M_MC_DEBUG _SB_MAKEMASK1(63) + +#define V_MC_CONFIG_DEFAULT V_MC_WR_LIMIT_DEFAULT | V_MC_AGE_LIMIT_DEFAULT | \ + V_MC_BANK0_MAP_DEFAULT | V_MC_BANK1_MAP_DEFAULT | \ + V_MC_BANK2_MAP_DEFAULT | V_MC_BANK3_MAP_DEFAULT | V_MC_CHANNEL_SEL(0) | \ + M_MC_IOB1HIGHPRIORITY | V_MC_QUEUE_SIZE_DEFAULT + + +/* + * Memory clock config register (Table 6-15) + * + * Note: this field has been updated to be consistent with the errata to 0.2 + */ + +#define S_MC_CLK_RATIO 0 +#define M_MC_CLK_RATIO _SB_MAKEMASK(4, S_MC_CLK_RATIO) +#define V_MC_CLK_RATIO(x) _SB_MAKEVALUE(x, S_MC_CLK_RATIO) +#define G_MC_CLK_RATIO(x) _SB_GETVALUE(x, S_MC_CLK_RATIO, M_MC_CLK_RATIO) + +#define K_MC_CLK_RATIO_2X 4 +#define K_MC_CLK_RATIO_25X 5 +#define K_MC_CLK_RATIO_3X 6 +#define K_MC_CLK_RATIO_35X 7 +#define K_MC_CLK_RATIO_4X 8 +#define K_MC_CLK_RATIO_45X 9 + +#define V_MC_CLK_RATIO_2X V_MC_CLK_RATIO(K_MC_CLK_RATIO_2X) +#define V_MC_CLK_RATIO_25X V_MC_CLK_RATIO(K_MC_CLK_RATIO_25X) +#define V_MC_CLK_RATIO_3X V_MC_CLK_RATIO(K_MC_CLK_RATIO_3X) +#define V_MC_CLK_RATIO_35X V_MC_CLK_RATIO(K_MC_CLK_RATIO_35X) +#define V_MC_CLK_RATIO_4X V_MC_CLK_RATIO(K_MC_CLK_RATIO_4X) +#define V_MC_CLK_RATIO_45X V_MC_CLK_RATIO(K_MC_CLK_RATIO_45X) +#define V_MC_CLK_RATIO_DEFAULT V_MC_CLK_RATIO_25X + +#define S_MC_REF_RATE 8 +#define M_MC_REF_RATE _SB_MAKEMASK(8, S_MC_REF_RATE) +#define V_MC_REF_RATE(x) _SB_MAKEVALUE(x, S_MC_REF_RATE) +#define G_MC_REF_RATE(x) _SB_GETVALUE(x, S_MC_REF_RATE, M_MC_REF_RATE) + +#define K_MC_REF_RATE_100MHz 0x62 +#define K_MC_REF_RATE_133MHz 0x81 +#define K_MC_REF_RATE_200MHz 0xC4 + +#define V_MC_REF_RATE_100MHz V_MC_REF_RATE(K_MC_REF_RATE_100MHz) +#define V_MC_REF_RATE_133MHz V_MC_REF_RATE(K_MC_REF_RATE_133MHz) +#define V_MC_REF_RATE_200MHz V_MC_REF_RATE(K_MC_REF_RATE_200MHz) +#define V_MC_REF_RATE_DEFAULT V_MC_REF_RATE_100MHz + +#define S_MC_CLOCK_DRIVE 16 +#define M_MC_CLOCK_DRIVE _SB_MAKEMASK(4, S_MC_CLOCK_DRIVE) +#define V_MC_CLOCK_DRIVE(x) _SB_MAKEVALUE(x, S_MC_CLOCK_DRIVE) +#define G_MC_CLOCK_DRIVE(x) _SB_GETVALUE(x, S_MC_CLOCK_DRIVE, M_MC_CLOCK_DRIVE) +#define V_MC_CLOCK_DRIVE_DEFAULT V_MC_CLOCK_DRIVE(0xF) + +#define S_MC_DATA_DRIVE 20 +#define M_MC_DATA_DRIVE _SB_MAKEMASK(4, S_MC_DATA_DRIVE) +#define V_MC_DATA_DRIVE(x) _SB_MAKEVALUE(x, S_MC_DATA_DRIVE) +#define G_MC_DATA_DRIVE(x) _SB_GETVALUE(x, S_MC_DATA_DRIVE, M_MC_DATA_DRIVE) +#define V_MC_DATA_DRIVE_DEFAULT V_MC_DATA_DRIVE(0x0) + +#define S_MC_ADDR_DRIVE 24 +#define M_MC_ADDR_DRIVE _SB_MAKEMASK(4, S_MC_ADDR_DRIVE) +#define V_MC_ADDR_DRIVE(x) _SB_MAKEVALUE(x, S_MC_ADDR_DRIVE) +#define G_MC_ADDR_DRIVE(x) _SB_GETVALUE(x, S_MC_ADDR_DRIVE, M_MC_ADDR_DRIVE) +#define V_MC_ADDR_DRIVE_DEFAULT V_MC_ADDR_DRIVE(0x0) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_MC_REF_DISABLE _SB_MAKEMASK1(30) +#endif /* 1250 PASS3 || 112x PASS1 */ + +#define M_MC_DLL_BYPASS _SB_MAKEMASK1(31) + +#define S_MC_DQI_SKEW 32 +#define M_MC_DQI_SKEW _SB_MAKEMASK(8, S_MC_DQI_SKEW) +#define V_MC_DQI_SKEW(x) _SB_MAKEVALUE(x, S_MC_DQI_SKEW) +#define G_MC_DQI_SKEW(x) _SB_GETVALUE(x, S_MC_DQI_SKEW, M_MC_DQI_SKEW) +#define V_MC_DQI_SKEW_DEFAULT V_MC_DQI_SKEW(0) + +#define S_MC_DQO_SKEW 40 +#define M_MC_DQO_SKEW _SB_MAKEMASK(8, S_MC_DQO_SKEW) +#define V_MC_DQO_SKEW(x) _SB_MAKEVALUE(x, S_MC_DQO_SKEW) +#define G_MC_DQO_SKEW(x) _SB_GETVALUE(x, S_MC_DQO_SKEW, M_MC_DQO_SKEW) +#define V_MC_DQO_SKEW_DEFAULT V_MC_DQO_SKEW(0) + +#define S_MC_ADDR_SKEW 48 +#define M_MC_ADDR_SKEW _SB_MAKEMASK(8, S_MC_ADDR_SKEW) +#define V_MC_ADDR_SKEW(x) _SB_MAKEVALUE(x, S_MC_ADDR_SKEW) +#define G_MC_ADDR_SKEW(x) _SB_GETVALUE(x, S_MC_ADDR_SKEW, M_MC_ADDR_SKEW) +#define V_MC_ADDR_SKEW_DEFAULT V_MC_ADDR_SKEW(0x0F) + +#define S_MC_DLL_DEFAULT 56 +#define M_MC_DLL_DEFAULT _SB_MAKEMASK(8, S_MC_DLL_DEFAULT) +#define V_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x, S_MC_DLL_DEFAULT) +#define G_MC_DLL_DEFAULT(x) _SB_GETVALUE(x, S_MC_DLL_DEFAULT, M_MC_DLL_DEFAULT) +#define V_MC_DLL_DEFAULT_DEFAULT V_MC_DLL_DEFAULT(0x10) + +#define V_MC_CLKCONFIG_DEFAULT V_MC_DLL_DEFAULT_DEFAULT | \ + V_MC_ADDR_SKEW_DEFAULT | \ + V_MC_DQO_SKEW_DEFAULT | \ + V_MC_DQI_SKEW_DEFAULT | \ + V_MC_ADDR_DRIVE_DEFAULT | \ + V_MC_DATA_DRIVE_DEFAULT | \ + V_MC_CLOCK_DRIVE_DEFAULT | \ + V_MC_REF_RATE_DEFAULT + + + +/* + * DRAM Command Register (Table 6-13) + */ + +#define S_MC_COMMAND 0 +#define M_MC_COMMAND _SB_MAKEMASK(4, S_MC_COMMAND) +#define V_MC_COMMAND(x) _SB_MAKEVALUE(x, S_MC_COMMAND) +#define G_MC_COMMAND(x) _SB_GETVALUE(x, S_MC_COMMAND, M_MC_COMMAND) + +#define K_MC_COMMAND_EMRS 0 +#define K_MC_COMMAND_MRS 1 +#define K_MC_COMMAND_PRE 2 +#define K_MC_COMMAND_AR 3 +#define K_MC_COMMAND_SETRFSH 4 +#define K_MC_COMMAND_CLRRFSH 5 +#define K_MC_COMMAND_SETPWRDN 6 +#define K_MC_COMMAND_CLRPWRDN 7 + +#define V_MC_COMMAND_EMRS V_MC_COMMAND(K_MC_COMMAND_EMRS) +#define V_MC_COMMAND_MRS V_MC_COMMAND(K_MC_COMMAND_MRS) +#define V_MC_COMMAND_PRE V_MC_COMMAND(K_MC_COMMAND_PRE) +#define V_MC_COMMAND_AR V_MC_COMMAND(K_MC_COMMAND_AR) +#define V_MC_COMMAND_SETRFSH V_MC_COMMAND(K_MC_COMMAND_SETRFSH) +#define V_MC_COMMAND_CLRRFSH V_MC_COMMAND(K_MC_COMMAND_CLRRFSH) +#define V_MC_COMMAND_SETPWRDN V_MC_COMMAND(K_MC_COMMAND_SETPWRDN) +#define V_MC_COMMAND_CLRPWRDN V_MC_COMMAND(K_MC_COMMAND_CLRPWRDN) + +#define M_MC_CS0 _SB_MAKEMASK1(4) +#define M_MC_CS1 _SB_MAKEMASK1(5) +#define M_MC_CS2 _SB_MAKEMASK1(6) +#define M_MC_CS3 _SB_MAKEMASK1(7) + +/* + * DRAM Mode Register (Table 6-14) + */ + +#define S_MC_EMODE 0 +#define M_MC_EMODE _SB_MAKEMASK(15, S_MC_EMODE) +#define V_MC_EMODE(x) _SB_MAKEVALUE(x, S_MC_EMODE) +#define G_MC_EMODE(x) _SB_GETVALUE(x, S_MC_EMODE, M_MC_EMODE) +#define V_MC_EMODE_DEFAULT V_MC_EMODE(0) + +#define S_MC_MODE 16 +#define M_MC_MODE _SB_MAKEMASK(15, S_MC_MODE) +#define V_MC_MODE(x) _SB_MAKEVALUE(x, S_MC_MODE) +#define G_MC_MODE(x) _SB_GETVALUE(x, S_MC_MODE, M_MC_MODE) +#define V_MC_MODE_DEFAULT V_MC_MODE(0x22) + +#define S_MC_DRAM_TYPE 32 +#define M_MC_DRAM_TYPE _SB_MAKEMASK(3, S_MC_DRAM_TYPE) +#define V_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x, S_MC_DRAM_TYPE) +#define G_MC_DRAM_TYPE(x) _SB_GETVALUE(x, S_MC_DRAM_TYPE, M_MC_DRAM_TYPE) + +#define K_MC_DRAM_TYPE_JEDEC 0 +#define K_MC_DRAM_TYPE_FCRAM 1 +#define K_MC_DRAM_TYPE_SGRAM 2 + +#define V_MC_DRAM_TYPE_JEDEC V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_JEDEC) +#define V_MC_DRAM_TYPE_FCRAM V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_FCRAM) +#define V_MC_DRAM_TYPE_SGRAM V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_SGRAM) + +#define M_MC_EXTERNALDECODE _SB_MAKEMASK1(35) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_MC_PRE_ON_A8 _SB_MAKEMASK1(36) +#define M_MC_RAM_WITH_A13 _SB_MAKEMASK1(37) +#endif /* 1250 PASS3 || 112x PASS1 */ + + + +/* + * SDRAM Timing Register (Table 6-15) + */ + +#define M_MC_w2rIDLE_TWOCYCLES _SB_MAKEMASK1(60) +#define M_MC_r2wIDLE_TWOCYCLES _SB_MAKEMASK1(61) +#define M_MC_r2rIDLE_TWOCYCLES _SB_MAKEMASK1(62) + +#define S_MC_tFIFO 56 +#define M_MC_tFIFO _SB_MAKEMASK(4, S_MC_tFIFO) +#define V_MC_tFIFO(x) _SB_MAKEVALUE(x, S_MC_tFIFO) +#define G_MC_tFIFO(x) _SB_GETVALUE(x, S_MC_tFIFO, M_MC_tFIFO) +#define K_MC_tFIFO_DEFAULT 1 +#define V_MC_tFIFO_DEFAULT V_MC_tFIFO(K_MC_tFIFO_DEFAULT) + +#define S_MC_tRFC 52 +#define M_MC_tRFC _SB_MAKEMASK(4, S_MC_tRFC) +#define V_MC_tRFC(x) _SB_MAKEVALUE(x, S_MC_tRFC) +#define G_MC_tRFC(x) _SB_GETVALUE(x, S_MC_tRFC, M_MC_tRFC) +#define K_MC_tRFC_DEFAULT 12 +#define V_MC_tRFC_DEFAULT V_MC_tRFC(K_MC_tRFC_DEFAULT) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) +#define M_MC_tRFC_PLUS16 _SB_MAKEMASK1(51) /* 1250C3 and later. */ +#endif + +#define S_MC_tCwCr 40 +#define M_MC_tCwCr _SB_MAKEMASK(4, S_MC_tCwCr) +#define V_MC_tCwCr(x) _SB_MAKEVALUE(x, S_MC_tCwCr) +#define G_MC_tCwCr(x) _SB_GETVALUE(x, S_MC_tCwCr, M_MC_tCwCr) +#define K_MC_tCwCr_DEFAULT 4 +#define V_MC_tCwCr_DEFAULT V_MC_tCwCr(K_MC_tCwCr_DEFAULT) + +#define S_MC_tRCr 28 +#define M_MC_tRCr _SB_MAKEMASK(4, S_MC_tRCr) +#define V_MC_tRCr(x) _SB_MAKEVALUE(x, S_MC_tRCr) +#define G_MC_tRCr(x) _SB_GETVALUE(x, S_MC_tRCr, M_MC_tRCr) +#define K_MC_tRCr_DEFAULT 9 +#define V_MC_tRCr_DEFAULT V_MC_tRCr(K_MC_tRCr_DEFAULT) + +#define S_MC_tRCw 24 +#define M_MC_tRCw _SB_MAKEMASK(4, S_MC_tRCw) +#define V_MC_tRCw(x) _SB_MAKEVALUE(x, S_MC_tRCw) +#define G_MC_tRCw(x) _SB_GETVALUE(x, S_MC_tRCw, M_MC_tRCw) +#define K_MC_tRCw_DEFAULT 10 +#define V_MC_tRCw_DEFAULT V_MC_tRCw(K_MC_tRCw_DEFAULT) + +#define S_MC_tRRD 20 +#define M_MC_tRRD _SB_MAKEMASK(4, S_MC_tRRD) +#define V_MC_tRRD(x) _SB_MAKEVALUE(x, S_MC_tRRD) +#define G_MC_tRRD(x) _SB_GETVALUE(x, S_MC_tRRD, M_MC_tRRD) +#define K_MC_tRRD_DEFAULT 2 +#define V_MC_tRRD_DEFAULT V_MC_tRRD(K_MC_tRRD_DEFAULT) + +#define S_MC_tRP 16 +#define M_MC_tRP _SB_MAKEMASK(4, S_MC_tRP) +#define V_MC_tRP(x) _SB_MAKEVALUE(x, S_MC_tRP) +#define G_MC_tRP(x) _SB_GETVALUE(x, S_MC_tRP, M_MC_tRP) +#define K_MC_tRP_DEFAULT 4 +#define V_MC_tRP_DEFAULT V_MC_tRP(K_MC_tRP_DEFAULT) + +#define S_MC_tCwD 8 +#define M_MC_tCwD _SB_MAKEMASK(4, S_MC_tCwD) +#define V_MC_tCwD(x) _SB_MAKEVALUE(x, S_MC_tCwD) +#define G_MC_tCwD(x) _SB_GETVALUE(x, S_MC_tCwD, M_MC_tCwD) +#define K_MC_tCwD_DEFAULT 1 +#define V_MC_tCwD_DEFAULT V_MC_tCwD(K_MC_tCwD_DEFAULT) + +#define M_tCrDh _SB_MAKEMASK1(7) +#define M_MC_tCrDh M_tCrDh + +#define S_MC_tCrD 4 +#define M_MC_tCrD _SB_MAKEMASK(3, S_MC_tCrD) +#define V_MC_tCrD(x) _SB_MAKEVALUE(x, S_MC_tCrD) +#define G_MC_tCrD(x) _SB_GETVALUE(x, S_MC_tCrD, M_MC_tCrD) +#define K_MC_tCrD_DEFAULT 2 +#define V_MC_tCrD_DEFAULT V_MC_tCrD(K_MC_tCrD_DEFAULT) + +#define S_MC_tRCD 0 +#define M_MC_tRCD _SB_MAKEMASK(4, S_MC_tRCD) +#define V_MC_tRCD(x) _SB_MAKEVALUE(x, S_MC_tRCD) +#define G_MC_tRCD(x) _SB_GETVALUE(x, S_MC_tRCD, M_MC_tRCD) +#define K_MC_tRCD_DEFAULT 3 +#define V_MC_tRCD_DEFAULT V_MC_tRCD(K_MC_tRCD_DEFAULT) + +#define V_MC_TIMING_DEFAULT V_MC_tFIFO(K_MC_tFIFO_DEFAULT) | \ + V_MC_tRFC(K_MC_tRFC_DEFAULT) | \ + V_MC_tCwCr(K_MC_tCwCr_DEFAULT) | \ + V_MC_tRCr(K_MC_tRCr_DEFAULT) | \ + V_MC_tRCw(K_MC_tRCw_DEFAULT) | \ + V_MC_tRRD(K_MC_tRRD_DEFAULT) | \ + V_MC_tRP(K_MC_tRP_DEFAULT) | \ + V_MC_tCwD(K_MC_tCwD_DEFAULT) | \ + V_MC_tCrD(K_MC_tCrD_DEFAULT) | \ + V_MC_tRCD(K_MC_tRCD_DEFAULT) | \ + M_MC_r2rIDLE_TWOCYCLES + +/* + * Errata says these are not the default + * M_MC_w2rIDLE_TWOCYCLES | \ + * M_MC_r2wIDLE_TWOCYCLES | \ + */ + + +/* + * Chip Select Start Address Register (Table 6-17) + */ + +#define S_MC_CS0_START 0 +#define M_MC_CS0_START _SB_MAKEMASK(16, S_MC_CS0_START) +#define V_MC_CS0_START(x) _SB_MAKEVALUE(x, S_MC_CS0_START) +#define G_MC_CS0_START(x) _SB_GETVALUE(x, S_MC_CS0_START, M_MC_CS0_START) + +#define S_MC_CS1_START 16 +#define M_MC_CS1_START _SB_MAKEMASK(16, S_MC_CS1_START) +#define V_MC_CS1_START(x) _SB_MAKEVALUE(x, S_MC_CS1_START) +#define G_MC_CS1_START(x) _SB_GETVALUE(x, S_MC_CS1_START, M_MC_CS1_START) + +#define S_MC_CS2_START 32 +#define M_MC_CS2_START _SB_MAKEMASK(16, S_MC_CS2_START) +#define V_MC_CS2_START(x) _SB_MAKEVALUE(x, S_MC_CS2_START) +#define G_MC_CS2_START(x) _SB_GETVALUE(x, S_MC_CS2_START, M_MC_CS2_START) + +#define S_MC_CS3_START 48 +#define M_MC_CS3_START _SB_MAKEMASK(16, S_MC_CS3_START) +#define V_MC_CS3_START(x) _SB_MAKEVALUE(x, S_MC_CS3_START) +#define G_MC_CS3_START(x) _SB_GETVALUE(x, S_MC_CS3_START, M_MC_CS3_START) + +/* + * Chip Select End Address Register (Table 6-18) + */ + +#define S_MC_CS0_END 0 +#define M_MC_CS0_END _SB_MAKEMASK(16, S_MC_CS0_END) +#define V_MC_CS0_END(x) _SB_MAKEVALUE(x, S_MC_CS0_END) +#define G_MC_CS0_END(x) _SB_GETVALUE(x, S_MC_CS0_END, M_MC_CS0_END) + +#define S_MC_CS1_END 16 +#define M_MC_CS1_END _SB_MAKEMASK(16, S_MC_CS1_END) +#define V_MC_CS1_END(x) _SB_MAKEVALUE(x, S_MC_CS1_END) +#define G_MC_CS1_END(x) _SB_GETVALUE(x, S_MC_CS1_END, M_MC_CS1_END) + +#define S_MC_CS2_END 32 +#define M_MC_CS2_END _SB_MAKEMASK(16, S_MC_CS2_END) +#define V_MC_CS2_END(x) _SB_MAKEVALUE(x, S_MC_CS2_END) +#define G_MC_CS2_END(x) _SB_GETVALUE(x, S_MC_CS2_END, M_MC_CS2_END) + +#define S_MC_CS3_END 48 +#define M_MC_CS3_END _SB_MAKEMASK(16, S_MC_CS3_END) +#define V_MC_CS3_END(x) _SB_MAKEVALUE(x, S_MC_CS3_END) +#define G_MC_CS3_END(x) _SB_GETVALUE(x, S_MC_CS3_END, M_MC_CS3_END) + +/* + * Chip Select Interleave Register (Table 6-19) + */ + +#define S_MC_INTLV_RESERVED 0 +#define M_MC_INTLV_RESERVED _SB_MAKEMASK(5, S_MC_INTLV_RESERVED) + +#define S_MC_INTERLEAVE 7 +#define M_MC_INTERLEAVE _SB_MAKEMASK(18, S_MC_INTERLEAVE) +#define V_MC_INTERLEAVE(x) _SB_MAKEVALUE(x, S_MC_INTERLEAVE) + +#define S_MC_INTLV_MBZ 25 +#define M_MC_INTLV_MBZ _SB_MAKEMASK(39, S_MC_INTLV_MBZ) + +/* + * Row Address Bits Register (Table 6-20) + */ + +#define S_MC_RAS_RESERVED 0 +#define M_MC_RAS_RESERVED _SB_MAKEMASK(5, S_MC_RAS_RESERVED) + +#define S_MC_RAS_SELECT 12 +#define M_MC_RAS_SELECT _SB_MAKEMASK(25, S_MC_RAS_SELECT) +#define V_MC_RAS_SELECT(x) _SB_MAKEVALUE(x, S_MC_RAS_SELECT) + +#define S_MC_RAS_MBZ 37 +#define M_MC_RAS_MBZ _SB_MAKEMASK(27, S_MC_RAS_MBZ) + + +/* + * Column Address Bits Register (Table 6-21) + */ + +#define S_MC_CAS_RESERVED 0 +#define M_MC_CAS_RESERVED _SB_MAKEMASK(5, S_MC_CAS_RESERVED) + +#define S_MC_CAS_SELECT 5 +#define M_MC_CAS_SELECT _SB_MAKEMASK(18, S_MC_CAS_SELECT) +#define V_MC_CAS_SELECT(x) _SB_MAKEVALUE(x, S_MC_CAS_SELECT) + +#define S_MC_CAS_MBZ 23 +#define M_MC_CAS_MBZ _SB_MAKEMASK(41, S_MC_CAS_MBZ) + + +/* + * Bank Address Address Bits Register (Table 6-22) + */ + +#define S_MC_BA_RESERVED 0 +#define M_MC_BA_RESERVED _SB_MAKEMASK(5, S_MC_BA_RESERVED) + +#define S_MC_BA_SELECT 5 +#define M_MC_BA_SELECT _SB_MAKEMASK(20, S_MC_BA_SELECT) +#define V_MC_BA_SELECT(x) _SB_MAKEVALUE(x, S_MC_BA_SELECT) + +#define S_MC_BA_MBZ 25 +#define M_MC_BA_MBZ _SB_MAKEMASK(39, S_MC_BA_MBZ) + +/* + * Chip Select Attribute Register (Table 6-23) + */ + +#define K_MC_CS_ATTR_CLOSED 0 +#define K_MC_CS_ATTR_CASCHECK 1 +#define K_MC_CS_ATTR_HINT 2 +#define K_MC_CS_ATTR_OPEN 3 + +#define S_MC_CS0_PAGE 0 +#define M_MC_CS0_PAGE _SB_MAKEMASK(2, S_MC_CS0_PAGE) +#define V_MC_CS0_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS0_PAGE) +#define G_MC_CS0_PAGE(x) _SB_GETVALUE(x, S_MC_CS0_PAGE, M_MC_CS0_PAGE) + +#define S_MC_CS1_PAGE 16 +#define M_MC_CS1_PAGE _SB_MAKEMASK(2, S_MC_CS1_PAGE) +#define V_MC_CS1_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS1_PAGE) +#define G_MC_CS1_PAGE(x) _SB_GETVALUE(x, S_MC_CS1_PAGE, M_MC_CS1_PAGE) + +#define S_MC_CS2_PAGE 32 +#define M_MC_CS2_PAGE _SB_MAKEMASK(2, S_MC_CS2_PAGE) +#define V_MC_CS2_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS2_PAGE) +#define G_MC_CS2_PAGE(x) _SB_GETVALUE(x, S_MC_CS2_PAGE, M_MC_CS2_PAGE) + +#define S_MC_CS3_PAGE 48 +#define M_MC_CS3_PAGE _SB_MAKEMASK(2, S_MC_CS3_PAGE) +#define V_MC_CS3_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS3_PAGE) +#define G_MC_CS3_PAGE(x) _SB_GETVALUE(x, S_MC_CS3_PAGE, M_MC_CS3_PAGE) + +/* + * ECC Test ECC Register (Table 6-25) + */ + +#define S_MC_ECC_INVERT 0 +#define M_MC_ECC_INVERT _SB_MAKEMASK(8, S_MC_ECC_INVERT) + + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_regs.h b/arch/mips/include/asm/sibyte/sb1250_regs.h new file mode 100644 index 000000000000..8f53ec817a5e --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_regs.h @@ -0,0 +1,893 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * Register Definitions File: sb1250_regs.h + * + * This module contains the addresses of the on-chip peripherals + * on the SB1250. + * + * SB1250 specification level: 01/02/2002 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_REGS_H +#define _SB1250_REGS_H + +#include "sb1250_defs.h" + + +/* ********************************************************************* + * Some general notes: + * + * For the most part, when there is more than one peripheral + * of the same type on the SOC, the constants below will be + * offsets from the base of each peripheral. For example, + * the MAC registers are described as offsets from the first + * MAC register, and there will be a MAC_REGISTER() macro + * to calculate the base address of a given MAC. + * + * The information in this file is based on the SB1250 SOC + * manual version 0.2, July 2000. + ********************************************************************* */ + + +/* ********************************************************************* + * Memory Controller Registers + ********************************************************************* */ + +/* + * XXX: can't remove MC base 0 if 112x, since it's used by other macros, + * since there is one reg there (but it could get its addr/offset constant). + */ + +#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ +#define A_MC_BASE_0 0x0010051000 +#define A_MC_BASE_1 0x0010052000 +#define MC_REGISTER_SPACING 0x1000 + +#define A_MC_BASE(ctlid) ((ctlid)*MC_REGISTER_SPACING+A_MC_BASE_0) +#define A_MC_REGISTER(ctlid, reg) (A_MC_BASE(ctlid)+(reg)) + +#define R_MC_CONFIG 0x0000000100 +#define R_MC_DRAMCMD 0x0000000120 +#define R_MC_DRAMMODE 0x0000000140 +#define R_MC_TIMING1 0x0000000160 +#define R_MC_TIMING2 0x0000000180 +#define R_MC_CS_START 0x00000001A0 +#define R_MC_CS_END 0x00000001C0 +#define R_MC_CS_INTERLEAVE 0x00000001E0 +#define S_MC_CS_STARTEND 16 + +#define R_MC_CSX_BASE 0x0000000200 +#define R_MC_CSX_ROW 0x0000000000 /* relative to CSX_BASE, above */ +#define R_MC_CSX_COL 0x0000000020 /* relative to CSX_BASE, above */ +#define R_MC_CSX_BA 0x0000000040 /* relative to CSX_BASE, above */ +#define MC_CSX_SPACING 0x0000000060 /* relative to CSX_BASE, above */ + +#define R_MC_CS0_ROW 0x0000000200 +#define R_MC_CS0_COL 0x0000000220 +#define R_MC_CS0_BA 0x0000000240 +#define R_MC_CS1_ROW 0x0000000260 +#define R_MC_CS1_COL 0x0000000280 +#define R_MC_CS1_BA 0x00000002A0 +#define R_MC_CS2_ROW 0x00000002C0 +#define R_MC_CS2_COL 0x00000002E0 +#define R_MC_CS2_BA 0x0000000300 +#define R_MC_CS3_ROW 0x0000000320 +#define R_MC_CS3_COL 0x0000000340 +#define R_MC_CS3_BA 0x0000000360 +#define R_MC_CS_ATTR 0x0000000380 +#define R_MC_TEST_DATA 0x0000000400 +#define R_MC_TEST_ECC 0x0000000420 +#define R_MC_MCLK_CFG 0x0000000500 + +#endif /* 1250 & 112x */ + +/* ********************************************************************* + * L2 Cache Control Registers + ********************************************************************* */ + +#if SIBYTE_HDR_FEATURE_1250_112x /* This L2C only on 1250/112x */ + +#define A_L2_READ_TAG 0x0010040018 +#define A_L2_ECC_TAG 0x0010040038 +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_L2_READ_MISC 0x0010040058 +#endif /* 1250 PASS3 || 112x PASS1 */ +#define A_L2_WAY_DISABLE 0x0010041000 +#define A_L2_MAKEDISABLE(x) (A_L2_WAY_DISABLE | (((~(x))&0x0F) << 8)) +#define A_L2_MGMT_TAG_BASE 0x00D0000000 + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_L2_CACHE_DISABLE 0x0010042000 +#define A_L2_MAKECACHEDISABLE(x) (A_L2_CACHE_DISABLE | (((x)&0x0F) << 8)) +#define A_L2_MISC_CONFIG 0x0010043000 +#endif /* 1250 PASS2 || 112x PASS1 */ + +/* Backward-compatibility definitions. */ +/* XXX: discourage people from using these constants. */ +#define A_L2_READ_ADDRESS A_L2_READ_TAG +#define A_L2_EEC_ADDRESS A_L2_ECC_TAG + +#endif + + +/* ********************************************************************* + * PCI Interface Registers + ********************************************************************* */ + +#if SIBYTE_HDR_FEATURE_1250_112x /* This PCI/HT only on 1250/112x */ +#define A_PCI_TYPE00_HEADER 0x00DE000000 +#define A_PCI_TYPE01_HEADER 0x00DE000800 +#endif + + +/* ********************************************************************* + * Ethernet DMA and MACs + ********************************************************************* */ + +#define A_MAC_BASE_0 0x0010064000 +#define A_MAC_BASE_1 0x0010065000 +#if SIBYTE_HDR_FEATURE_CHIP(1250) +#define A_MAC_BASE_2 0x0010066000 +#endif /* 1250 */ + +#define MAC_SPACING 0x1000 +#define MAC_DMA_TXRX_SPACING 0x0400 +#define MAC_DMA_CHANNEL_SPACING 0x0100 +#define DMA_RX 0 +#define DMA_TX 1 +#define MAC_NUM_DMACHAN 2 /* channels per direction */ + +/* XXX: not correct; depends on SOC type. */ +#define MAC_NUM_PORTS 3 + +#define A_MAC_CHANNEL_BASE(macnum) \ + (A_MAC_BASE_0 + \ + MAC_SPACING*(macnum)) + +#define A_MAC_REGISTER(macnum,reg) \ + (A_MAC_BASE_0 + \ + MAC_SPACING*(macnum) + (reg)) + + +#define R_MAC_DMA_CHANNELS 0x800 /* Relative to A_MAC_CHANNEL_BASE */ + +#define A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) \ + ((A_MAC_CHANNEL_BASE(macnum)) + \ + R_MAC_DMA_CHANNELS + \ + (MAC_DMA_TXRX_SPACING*(txrx)) + \ + (MAC_DMA_CHANNEL_SPACING*(chan))) + +#define R_MAC_DMA_CHANNEL_BASE(txrx, chan) \ + (R_MAC_DMA_CHANNELS + \ + (MAC_DMA_TXRX_SPACING*(txrx)) + \ + (MAC_DMA_CHANNEL_SPACING*(chan))) + +#define A_MAC_DMA_REGISTER(macnum, txrx, chan, reg) \ + (A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) + \ + (reg)) + +#define R_MAC_DMA_REGISTER(txrx, chan, reg) \ + (R_MAC_DMA_CHANNEL_BASE(txrx, chan) + \ + (reg)) + +/* + * DMA channel registers, relative to A_MAC_DMA_CHANNEL_BASE + */ + +#define R_MAC_DMA_CONFIG0 0x00000000 +#define R_MAC_DMA_CONFIG1 0x00000008 +#define R_MAC_DMA_DSCR_BASE 0x00000010 +#define R_MAC_DMA_DSCR_CNT 0x00000018 +#define R_MAC_DMA_CUR_DSCRA 0x00000020 +#define R_MAC_DMA_CUR_DSCRB 0x00000028 +#define R_MAC_DMA_CUR_DSCRADDR 0x00000030 +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define R_MAC_DMA_OODPKTLOST_RX 0x00000038 /* rx only */ +#endif /* 1250 PASS3 || 112x PASS1 */ + +/* + * RMON Counters + */ + +#define R_MAC_RMON_TX_BYTES 0x00000000 +#define R_MAC_RMON_COLLISIONS 0x00000008 +#define R_MAC_RMON_LATE_COL 0x00000010 +#define R_MAC_RMON_EX_COL 0x00000018 +#define R_MAC_RMON_FCS_ERROR 0x00000020 +#define R_MAC_RMON_TX_ABORT 0x00000028 +/* Counter #6 (0x30) now reserved */ +#define R_MAC_RMON_TX_BAD 0x00000038 +#define R_MAC_RMON_TX_GOOD 0x00000040 +#define R_MAC_RMON_TX_RUNT 0x00000048 +#define R_MAC_RMON_TX_OVERSIZE 0x00000050 +#define R_MAC_RMON_RX_BYTES 0x00000080 +#define R_MAC_RMON_RX_MCAST 0x00000088 +#define R_MAC_RMON_RX_BCAST 0x00000090 +#define R_MAC_RMON_RX_BAD 0x00000098 +#define R_MAC_RMON_RX_GOOD 0x000000A0 +#define R_MAC_RMON_RX_RUNT 0x000000A8 +#define R_MAC_RMON_RX_OVERSIZE 0x000000B0 +#define R_MAC_RMON_RX_FCS_ERROR 0x000000B8 +#define R_MAC_RMON_RX_LENGTH_ERROR 0x000000C0 +#define R_MAC_RMON_RX_CODE_ERROR 0x000000C8 +#define R_MAC_RMON_RX_ALIGN_ERROR 0x000000D0 + +/* Updated to spec 0.2 */ +#define R_MAC_CFG 0x00000100 +#define R_MAC_THRSH_CFG 0x00000108 +#define R_MAC_VLANTAG 0x00000110 +#define R_MAC_FRAMECFG 0x00000118 +#define R_MAC_EOPCNT 0x00000120 +#define R_MAC_FIFO_PTRS 0x00000128 +#define R_MAC_ADFILTER_CFG 0x00000200 +#define R_MAC_ETHERNET_ADDR 0x00000208 +#define R_MAC_PKT_TYPE 0x00000210 +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define R_MAC_ADMASK0 0x00000218 +#define R_MAC_ADMASK1 0x00000220 +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ +#define R_MAC_HASH_BASE 0x00000240 +#define R_MAC_ADDR_BASE 0x00000280 +#define R_MAC_CHLO0_BASE 0x00000300 +#define R_MAC_CHUP0_BASE 0x00000320 +#define R_MAC_ENABLE 0x00000400 +#define R_MAC_STATUS 0x00000408 +#define R_MAC_INT_MASK 0x00000410 +#define R_MAC_TXD_CTL 0x00000420 +#define R_MAC_MDIO 0x00000428 +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define R_MAC_STATUS1 0x00000430 +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ +#define R_MAC_DEBUG_STATUS 0x00000448 + +#define MAC_HASH_COUNT 8 +#define MAC_ADDR_COUNT 8 +#define MAC_CHMAP_COUNT 4 + + +/* ********************************************************************* + * DUART Registers + ********************************************************************* */ + + +#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ +#define R_DUART_NUM_PORTS 2 + +#define A_DUART 0x0010060000 + +#define DUART_CHANREG_SPACING 0x100 + +#define A_DUART_CHANREG(chan, reg) \ + (A_DUART + DUART_CHANREG_SPACING * ((chan) + 1) + (reg)) +#endif /* 1250 & 112x */ + +#define R_DUART_MODE_REG_1 0x000 +#define R_DUART_MODE_REG_2 0x010 +#define R_DUART_STATUS 0x020 +#define R_DUART_CLK_SEL 0x030 +#define R_DUART_CMD 0x050 +#define R_DUART_RX_HOLD 0x060 +#define R_DUART_TX_HOLD 0x070 + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define R_DUART_FULL_CTL 0x040 +#define R_DUART_OPCR_X 0x080 +#define R_DUART_AUXCTL_X 0x090 +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + + +/* + * The IMR and ISR can't be addressed with A_DUART_CHANREG, + * so use these macros instead. + */ + +#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ +#define DUART_IMRISR_SPACING 0x20 +#define DUART_INCHNG_SPACING 0x10 + +#define A_DUART_CTRLREG(reg) \ + (A_DUART + DUART_CHANREG_SPACING * 3 + (reg)) + +#define R_DUART_IMRREG(chan) \ + (R_DUART_IMR_A + (chan) * DUART_IMRISR_SPACING) +#define R_DUART_ISRREG(chan) \ + (R_DUART_ISR_A + (chan) * DUART_IMRISR_SPACING) +#define R_DUART_INCHREG(chan) \ + (R_DUART_IN_CHNG_A + (chan) * DUART_INCHNG_SPACING) + +#define A_DUART_IMRREG(chan) A_DUART_CTRLREG(R_DUART_IMRREG(chan)) +#define A_DUART_ISRREG(chan) A_DUART_CTRLREG(R_DUART_ISRREG(chan)) +#define A_DUART_INCHREG(chan) A_DUART_CTRLREG(R_DUART_INCHREG(chan)) +#endif /* 1250 & 112x */ + +#define R_DUART_AUX_CTRL 0x010 +#define R_DUART_ISR_A 0x020 +#define R_DUART_IMR_A 0x030 +#define R_DUART_ISR_B 0x040 +#define R_DUART_IMR_B 0x050 +#define R_DUART_OUT_PORT 0x060 +#define R_DUART_OPCR 0x070 +#define R_DUART_IN_PORT 0x080 + +#define R_DUART_SET_OPR 0x0B0 +#define R_DUART_CLEAR_OPR 0x0C0 +#define R_DUART_IN_CHNG_A 0x0D0 +#define R_DUART_IN_CHNG_B 0x0E0 + + +/* + * These constants are the absolute addresses. + */ + +#define A_DUART_MODE_REG_1_A 0x0010060100 +#define A_DUART_MODE_REG_2_A 0x0010060110 +#define A_DUART_STATUS_A 0x0010060120 +#define A_DUART_CLK_SEL_A 0x0010060130 +#define A_DUART_CMD_A 0x0010060150 +#define A_DUART_RX_HOLD_A 0x0010060160 +#define A_DUART_TX_HOLD_A 0x0010060170 + +#define A_DUART_MODE_REG_1_B 0x0010060200 +#define A_DUART_MODE_REG_2_B 0x0010060210 +#define A_DUART_STATUS_B 0x0010060220 +#define A_DUART_CLK_SEL_B 0x0010060230 +#define A_DUART_CMD_B 0x0010060250 +#define A_DUART_RX_HOLD_B 0x0010060260 +#define A_DUART_TX_HOLD_B 0x0010060270 + +#define A_DUART_INPORT_CHNG 0x0010060300 +#define A_DUART_AUX_CTRL 0x0010060310 +#define A_DUART_ISR_A 0x0010060320 +#define A_DUART_IMR_A 0x0010060330 +#define A_DUART_ISR_B 0x0010060340 +#define A_DUART_IMR_B 0x0010060350 +#define A_DUART_OUT_PORT 0x0010060360 +#define A_DUART_OPCR 0x0010060370 +#define A_DUART_IN_PORT 0x0010060380 +#define A_DUART_ISR 0x0010060390 +#define A_DUART_IMR 0x00100603A0 +#define A_DUART_SET_OPR 0x00100603B0 +#define A_DUART_CLEAR_OPR 0x00100603C0 +#define A_DUART_INPORT_CHNG_A 0x00100603D0 +#define A_DUART_INPORT_CHNG_B 0x00100603E0 + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_DUART_FULL_CTL_A 0x0010060140 +#define A_DUART_FULL_CTL_B 0x0010060240 + +#define A_DUART_OPCR_A 0x0010060180 +#define A_DUART_OPCR_B 0x0010060280 + +#define A_DUART_INPORT_CHNG_DEBUG 0x00100603F0 +#endif /* 1250 PASS2 || 112x PASS1 */ + + +/* ********************************************************************* + * Synchronous Serial Registers + ********************************************************************* */ + + +#if SIBYTE_HDR_FEATURE_1250_112x /* sync serial only on 1250/112x */ + +#define A_SER_BASE_0 0x0010060400 +#define A_SER_BASE_1 0x0010060800 +#define SER_SPACING 0x400 + +#define SER_DMA_TXRX_SPACING 0x80 + +#define SER_NUM_PORTS 2 + +#define A_SER_CHANNEL_BASE(sernum) \ + (A_SER_BASE_0 + \ + SER_SPACING*(sernum)) + +#define A_SER_REGISTER(sernum,reg) \ + (A_SER_BASE_0 + \ + SER_SPACING*(sernum) + (reg)) + + +#define R_SER_DMA_CHANNELS 0 /* Relative to A_SER_BASE_x */ + +#define A_SER_DMA_CHANNEL_BASE(sernum,txrx) \ + ((A_SER_CHANNEL_BASE(sernum)) + \ + R_SER_DMA_CHANNELS + \ + (SER_DMA_TXRX_SPACING*(txrx))) + +#define A_SER_DMA_REGISTER(sernum, txrx, reg) \ + (A_SER_DMA_CHANNEL_BASE(sernum, txrx) + \ + (reg)) + + +/* + * DMA channel registers, relative to A_SER_DMA_CHANNEL_BASE + */ + +#define R_SER_DMA_CONFIG0 0x00000000 +#define R_SER_DMA_CONFIG1 0x00000008 +#define R_SER_DMA_DSCR_BASE 0x00000010 +#define R_SER_DMA_DSCR_CNT 0x00000018 +#define R_SER_DMA_CUR_DSCRA 0x00000020 +#define R_SER_DMA_CUR_DSCRB 0x00000028 +#define R_SER_DMA_CUR_DSCRADDR 0x00000030 + +#define R_SER_DMA_CONFIG0_RX 0x00000000 +#define R_SER_DMA_CONFIG1_RX 0x00000008 +#define R_SER_DMA_DSCR_BASE_RX 0x00000010 +#define R_SER_DMA_DSCR_COUNT_RX 0x00000018 +#define R_SER_DMA_CUR_DSCR_A_RX 0x00000020 +#define R_SER_DMA_CUR_DSCR_B_RX 0x00000028 +#define R_SER_DMA_CUR_DSCR_ADDR_RX 0x00000030 + +#define R_SER_DMA_CONFIG0_TX 0x00000080 +#define R_SER_DMA_CONFIG1_TX 0x00000088 +#define R_SER_DMA_DSCR_BASE_TX 0x00000090 +#define R_SER_DMA_DSCR_COUNT_TX 0x00000098 +#define R_SER_DMA_CUR_DSCR_A_TX 0x000000A0 +#define R_SER_DMA_CUR_DSCR_B_TX 0x000000A8 +#define R_SER_DMA_CUR_DSCR_ADDR_TX 0x000000B0 + +#define R_SER_MODE 0x00000100 +#define R_SER_MINFRM_SZ 0x00000108 +#define R_SER_MAXFRM_SZ 0x00000110 +#define R_SER_ADDR 0x00000118 +#define R_SER_USR0_ADDR 0x00000120 +#define R_SER_USR1_ADDR 0x00000128 +#define R_SER_USR2_ADDR 0x00000130 +#define R_SER_USR3_ADDR 0x00000138 +#define R_SER_CMD 0x00000140 +#define R_SER_TX_RD_THRSH 0x00000160 +#define R_SER_TX_WR_THRSH 0x00000168 +#define R_SER_RX_RD_THRSH 0x00000170 +#define R_SER_LINE_MODE 0x00000178 +#define R_SER_DMA_ENABLE 0x00000180 +#define R_SER_INT_MASK 0x00000190 +#define R_SER_STATUS 0x00000188 +#define R_SER_STATUS_DEBUG 0x000001A8 +#define R_SER_RX_TABLE_BASE 0x00000200 +#define SER_RX_TABLE_COUNT 16 +#define R_SER_TX_TABLE_BASE 0x00000300 +#define SER_TX_TABLE_COUNT 16 + +/* RMON Counters */ +#define R_SER_RMON_TX_BYTE_LO 0x000001C0 +#define R_SER_RMON_TX_BYTE_HI 0x000001C8 +#define R_SER_RMON_RX_BYTE_LO 0x000001D0 +#define R_SER_RMON_RX_BYTE_HI 0x000001D8 +#define R_SER_RMON_TX_UNDERRUN 0x000001E0 +#define R_SER_RMON_RX_OVERFLOW 0x000001E8 +#define R_SER_RMON_RX_ERRORS 0x000001F0 +#define R_SER_RMON_RX_BADADDR 0x000001F8 + +#endif /* 1250/112x */ + +/* ********************************************************************* + * Generic Bus Registers + ********************************************************************* */ + +#define IO_EXT_CFG_COUNT 8 + +#define A_IO_EXT_BASE 0x0010061000 +#define A_IO_EXT_REG(r) (A_IO_EXT_BASE + (r)) + +#define A_IO_EXT_CFG_BASE 0x0010061000 +#define A_IO_EXT_MULT_SIZE_BASE 0x0010061100 +#define A_IO_EXT_START_ADDR_BASE 0x0010061200 +#define A_IO_EXT_TIME_CFG0_BASE 0x0010061600 +#define A_IO_EXT_TIME_CFG1_BASE 0x0010061700 + +#define IO_EXT_REGISTER_SPACING 8 +#define A_IO_EXT_CS_BASE(cs) (A_IO_EXT_CFG_BASE+IO_EXT_REGISTER_SPACING*(cs)) +#define R_IO_EXT_REG(reg, cs) ((cs)*IO_EXT_REGISTER_SPACING + (reg)) + +#define R_IO_EXT_CFG 0x0000 +#define R_IO_EXT_MULT_SIZE 0x0100 +#define R_IO_EXT_START_ADDR 0x0200 +#define R_IO_EXT_TIME_CFG0 0x0600 +#define R_IO_EXT_TIME_CFG1 0x0700 + + +#define A_IO_INTERRUPT_STATUS 0x0010061A00 +#define A_IO_INTERRUPT_DATA0 0x0010061A10 +#define A_IO_INTERRUPT_DATA1 0x0010061A18 +#define A_IO_INTERRUPT_DATA2 0x0010061A20 +#define A_IO_INTERRUPT_DATA3 0x0010061A28 +#define A_IO_INTERRUPT_ADDR0 0x0010061A30 +#define A_IO_INTERRUPT_ADDR1 0x0010061A40 +#define A_IO_INTERRUPT_PARITY 0x0010061A50 +#define A_IO_PCMCIA_CFG 0x0010061A60 +#define A_IO_PCMCIA_STATUS 0x0010061A70 +#define A_IO_DRIVE_0 0x0010061300 +#define A_IO_DRIVE_1 0x0010061308 +#define A_IO_DRIVE_2 0x0010061310 +#define A_IO_DRIVE_3 0x0010061318 +#define A_IO_DRIVE_BASE A_IO_DRIVE_0 +#define IO_DRIVE_REGISTER_SPACING 8 +#define R_IO_DRIVE(x) ((x)*IO_DRIVE_REGISTER_SPACING) +#define A_IO_DRIVE(x) (A_IO_DRIVE_BASE + R_IO_DRIVE(x)) + +#define R_IO_INTERRUPT_STATUS 0x0A00 +#define R_IO_INTERRUPT_DATA0 0x0A10 +#define R_IO_INTERRUPT_DATA1 0x0A18 +#define R_IO_INTERRUPT_DATA2 0x0A20 +#define R_IO_INTERRUPT_DATA3 0x0A28 +#define R_IO_INTERRUPT_ADDR0 0x0A30 +#define R_IO_INTERRUPT_ADDR1 0x0A40 +#define R_IO_INTERRUPT_PARITY 0x0A50 +#define R_IO_PCMCIA_CFG 0x0A60 +#define R_IO_PCMCIA_STATUS 0x0A70 + +/* ********************************************************************* + * GPIO Registers + ********************************************************************* */ + +#define A_GPIO_CLR_EDGE 0x0010061A80 +#define A_GPIO_INT_TYPE 0x0010061A88 +#define A_GPIO_INPUT_INVERT 0x0010061A90 +#define A_GPIO_GLITCH 0x0010061A98 +#define A_GPIO_READ 0x0010061AA0 +#define A_GPIO_DIRECTION 0x0010061AA8 +#define A_GPIO_PIN_CLR 0x0010061AB0 +#define A_GPIO_PIN_SET 0x0010061AB8 + +#define A_GPIO_BASE 0x0010061A80 + +#define R_GPIO_CLR_EDGE 0x00 +#define R_GPIO_INT_TYPE 0x08 +#define R_GPIO_INPUT_INVERT 0x10 +#define R_GPIO_GLITCH 0x18 +#define R_GPIO_READ 0x20 +#define R_GPIO_DIRECTION 0x28 +#define R_GPIO_PIN_CLR 0x30 +#define R_GPIO_PIN_SET 0x38 + +/* ********************************************************************* + * SMBus Registers + ********************************************************************* */ + +#define A_SMB_XTRA_0 0x0010060000 +#define A_SMB_XTRA_1 0x0010060008 +#define A_SMB_FREQ_0 0x0010060010 +#define A_SMB_FREQ_1 0x0010060018 +#define A_SMB_STATUS_0 0x0010060020 +#define A_SMB_STATUS_1 0x0010060028 +#define A_SMB_CMD_0 0x0010060030 +#define A_SMB_CMD_1 0x0010060038 +#define A_SMB_START_0 0x0010060040 +#define A_SMB_START_1 0x0010060048 +#define A_SMB_DATA_0 0x0010060050 +#define A_SMB_DATA_1 0x0010060058 +#define A_SMB_CONTROL_0 0x0010060060 +#define A_SMB_CONTROL_1 0x0010060068 +#define A_SMB_PEC_0 0x0010060070 +#define A_SMB_PEC_1 0x0010060078 + +#define A_SMB_0 0x0010060000 +#define A_SMB_1 0x0010060008 +#define SMB_REGISTER_SPACING 0x8 +#define A_SMB_BASE(idx) (A_SMB_0+(idx)*SMB_REGISTER_SPACING) +#define A_SMB_REGISTER(idx, reg) (A_SMB_BASE(idx)+(reg)) + +#define R_SMB_XTRA 0x0000000000 +#define R_SMB_FREQ 0x0000000010 +#define R_SMB_STATUS 0x0000000020 +#define R_SMB_CMD 0x0000000030 +#define R_SMB_START 0x0000000040 +#define R_SMB_DATA 0x0000000050 +#define R_SMB_CONTROL 0x0000000060 +#define R_SMB_PEC 0x0000000070 + +/* ********************************************************************* + * Timer Registers + ********************************************************************* */ + +/* + * Watchdog timers + */ + +#define A_SCD_WDOG_0 0x0010020050 +#define A_SCD_WDOG_1 0x0010020150 +#define SCD_WDOG_SPACING 0x100 +#define SCD_NUM_WDOGS 2 +#define A_SCD_WDOG_BASE(w) (A_SCD_WDOG_0+SCD_WDOG_SPACING*(w)) +#define A_SCD_WDOG_REGISTER(w, r) (A_SCD_WDOG_BASE(w) + (r)) + +#define R_SCD_WDOG_INIT 0x0000000000 +#define R_SCD_WDOG_CNT 0x0000000008 +#define R_SCD_WDOG_CFG 0x0000000010 + +#define A_SCD_WDOG_INIT_0 0x0010020050 +#define A_SCD_WDOG_CNT_0 0x0010020058 +#define A_SCD_WDOG_CFG_0 0x0010020060 + +#define A_SCD_WDOG_INIT_1 0x0010020150 +#define A_SCD_WDOG_CNT_1 0x0010020158 +#define A_SCD_WDOG_CFG_1 0x0010020160 + +/* + * Generic timers + */ + +#define A_SCD_TIMER_0 0x0010020070 +#define A_SCD_TIMER_1 0x0010020078 +#define A_SCD_TIMER_2 0x0010020170 +#define A_SCD_TIMER_3 0x0010020178 +#define SCD_NUM_TIMERS 4 +#define A_SCD_TIMER_BASE(w) (A_SCD_TIMER_0+0x08*((w)&1)+0x100*(((w)&2)>>1)) +#define A_SCD_TIMER_REGISTER(w, r) (A_SCD_TIMER_BASE(w) + (r)) + +#define R_SCD_TIMER_INIT 0x0000000000 +#define R_SCD_TIMER_CNT 0x0000000010 +#define R_SCD_TIMER_CFG 0x0000000020 + +#define A_SCD_TIMER_INIT_0 0x0010020070 +#define A_SCD_TIMER_CNT_0 0x0010020080 +#define A_SCD_TIMER_CFG_0 0x0010020090 + +#define A_SCD_TIMER_INIT_1 0x0010020078 +#define A_SCD_TIMER_CNT_1 0x0010020088 +#define A_SCD_TIMER_CFG_1 0x0010020098 + +#define A_SCD_TIMER_INIT_2 0x0010020170 +#define A_SCD_TIMER_CNT_2 0x0010020180 +#define A_SCD_TIMER_CFG_2 0x0010020190 + +#define A_SCD_TIMER_INIT_3 0x0010020178 +#define A_SCD_TIMER_CNT_3 0x0010020188 +#define A_SCD_TIMER_CFG_3 0x0010020198 + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_SCD_SCRATCH 0x0010020C10 +#endif /* 1250 PASS2 || 112x PASS1 */ + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define A_SCD_ZBBUS_CYCLE_COUNT 0x0010030000 +#define A_SCD_ZBBUS_CYCLE_CP0 0x0010020C00 +#define A_SCD_ZBBUS_CYCLE_CP1 0x0010020C08 +#endif + +/* ********************************************************************* + * System Control Registers + ********************************************************************* */ + +#define A_SCD_SYSTEM_REVISION 0x0010020000 +#define A_SCD_SYSTEM_CFG 0x0010020008 +#define A_SCD_SYSTEM_MANUF 0x0010038000 + +/* ********************************************************************* + * System Address Trap Registers + ********************************************************************* */ + +#define A_ADDR_TRAP_INDEX 0x00100200B0 +#define A_ADDR_TRAP_REG 0x00100200B8 +#define A_ADDR_TRAP_UP_0 0x0010020400 +#define A_ADDR_TRAP_UP_1 0x0010020408 +#define A_ADDR_TRAP_UP_2 0x0010020410 +#define A_ADDR_TRAP_UP_3 0x0010020418 +#define A_ADDR_TRAP_DOWN_0 0x0010020420 +#define A_ADDR_TRAP_DOWN_1 0x0010020428 +#define A_ADDR_TRAP_DOWN_2 0x0010020430 +#define A_ADDR_TRAP_DOWN_3 0x0010020438 +#define A_ADDR_TRAP_CFG_0 0x0010020440 +#define A_ADDR_TRAP_CFG_1 0x0010020448 +#define A_ADDR_TRAP_CFG_2 0x0010020450 +#define A_ADDR_TRAP_CFG_3 0x0010020458 +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define A_ADDR_TRAP_REG_DEBUG 0x0010020460 +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#define ADDR_TRAP_SPACING 8 +#define NUM_ADDR_TRAP 4 +#define A_ADDR_TRAP_UP(n) (A_ADDR_TRAP_UP_0 + ((n) * ADDR_TRAP_SPACING)) +#define A_ADDR_TRAP_DOWN(n) (A_ADDR_TRAP_DOWN_0 + ((n) * ADDR_TRAP_SPACING)) +#define A_ADDR_TRAP_CFG(n) (A_ADDR_TRAP_CFG_0 + ((n) * ADDR_TRAP_SPACING)) + + +/* ********************************************************************* + * System Interrupt Mapper Registers + ********************************************************************* */ + +#define A_IMR_CPU0_BASE 0x0010020000 +#define A_IMR_CPU1_BASE 0x0010022000 +#define IMR_REGISTER_SPACING 0x2000 +#define IMR_REGISTER_SPACING_SHIFT 13 + +#define A_IMR_MAPPER(cpu) (A_IMR_CPU0_BASE+(cpu)*IMR_REGISTER_SPACING) +#define A_IMR_REGISTER(cpu, reg) (A_IMR_MAPPER(cpu)+(reg)) + +#define R_IMR_INTERRUPT_DIAG 0x0010 +#define R_IMR_INTERRUPT_LDT 0x0018 +#define R_IMR_INTERRUPT_MASK 0x0028 +#define R_IMR_INTERRUPT_TRACE 0x0038 +#define R_IMR_INTERRUPT_SOURCE_STATUS 0x0040 +#define R_IMR_LDT_INTERRUPT_SET 0x0048 +#define R_IMR_LDT_INTERRUPT 0x0018 +#define R_IMR_LDT_INTERRUPT_CLR 0x0020 +#define R_IMR_MAILBOX_CPU 0x00c0 +#define R_IMR_ALIAS_MAILBOX_CPU 0x1000 +#define R_IMR_MAILBOX_SET_CPU 0x00C8 +#define R_IMR_ALIAS_MAILBOX_SET_CPU 0x1008 +#define R_IMR_MAILBOX_CLR_CPU 0x00D0 +#define R_IMR_INTERRUPT_STATUS_BASE 0x0100 +#define R_IMR_INTERRUPT_STATUS_COUNT 7 +#define R_IMR_INTERRUPT_MAP_BASE 0x0200 +#define R_IMR_INTERRUPT_MAP_COUNT 64 + +/* + * these macros work together to build the address of a mailbox + * register, e.g., A_MAILBOX_REGISTER(R_IMR_MAILBOX_SET_CPU,1) + * for mbox_0_set_cpu2 returns 0x00100240C8 + */ +#define A_MAILBOX_REGISTER(reg,cpu) \ + (A_IMR_CPU0_BASE + (cpu * IMR_REGISTER_SPACING) + reg) + +/* ********************************************************************* + * System Performance Counter Registers + ********************************************************************* */ + +#define A_SCD_PERF_CNT_CFG 0x00100204C0 +#define A_SCD_PERF_CNT_0 0x00100204D0 +#define A_SCD_PERF_CNT_1 0x00100204D8 +#define A_SCD_PERF_CNT_2 0x00100204E0 +#define A_SCD_PERF_CNT_3 0x00100204E8 + +#define SCD_NUM_PERF_CNT 4 +#define SCD_PERF_CNT_SPACING 8 +#define A_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*SCD_PERF_CNT_SPACING)) + +/* ********************************************************************* + * System Bus Watcher Registers + ********************************************************************* */ + +#define A_SCD_BUS_ERR_STATUS 0x0010020880 +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_SCD_BUS_ERR_STATUS_DEBUG 0x00100208D0 +#define A_BUS_ERR_STATUS_DEBUG 0x00100208D0 +#endif /* 1250 PASS2 || 112x PASS1 */ +#define A_BUS_ERR_DATA_0 0x00100208A0 +#define A_BUS_ERR_DATA_1 0x00100208A8 +#define A_BUS_ERR_DATA_2 0x00100208B0 +#define A_BUS_ERR_DATA_3 0x00100208B8 +#define A_BUS_L2_ERRORS 0x00100208C0 +#define A_BUS_MEM_IO_ERRORS 0x00100208C8 + +/* ********************************************************************* + * System Debug Controller Registers + ********************************************************************* */ + +#define A_SCD_JTAG_BASE 0x0010000000 + +/* ********************************************************************* + * System Trace Buffer Registers + ********************************************************************* */ + +#define A_SCD_TRACE_CFG 0x0010020A00 +#define A_SCD_TRACE_READ 0x0010020A08 +#define A_SCD_TRACE_EVENT_0 0x0010020A20 +#define A_SCD_TRACE_EVENT_1 0x0010020A28 +#define A_SCD_TRACE_EVENT_2 0x0010020A30 +#define A_SCD_TRACE_EVENT_3 0x0010020A38 +#define A_SCD_TRACE_SEQUENCE_0 0x0010020A40 +#define A_SCD_TRACE_SEQUENCE_1 0x0010020A48 +#define A_SCD_TRACE_SEQUENCE_2 0x0010020A50 +#define A_SCD_TRACE_SEQUENCE_3 0x0010020A58 +#define A_SCD_TRACE_EVENT_4 0x0010020A60 +#define A_SCD_TRACE_EVENT_5 0x0010020A68 +#define A_SCD_TRACE_EVENT_6 0x0010020A70 +#define A_SCD_TRACE_EVENT_7 0x0010020A78 +#define A_SCD_TRACE_SEQUENCE_4 0x0010020A80 +#define A_SCD_TRACE_SEQUENCE_5 0x0010020A88 +#define A_SCD_TRACE_SEQUENCE_6 0x0010020A90 +#define A_SCD_TRACE_SEQUENCE_7 0x0010020A98 + +#define TRACE_REGISTER_SPACING 8 +#define TRACE_NUM_REGISTERS 8 +#define A_SCD_TRACE_EVENT(n) (((n) & 4) ? \ + (A_SCD_TRACE_EVENT_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \ + (A_SCD_TRACE_EVENT_0 + ((n) * TRACE_REGISTER_SPACING))) +#define A_SCD_TRACE_SEQUENCE(n) (((n) & 4) ? \ + (A_SCD_TRACE_SEQUENCE_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \ + (A_SCD_TRACE_SEQUENCE_0 + ((n) * TRACE_REGISTER_SPACING))) + +/* ********************************************************************* + * System Generic DMA Registers + ********************************************************************* */ + +#define A_DM_0 0x0010020B00 +#define A_DM_1 0x0010020B20 +#define A_DM_2 0x0010020B40 +#define A_DM_3 0x0010020B60 +#define DM_REGISTER_SPACING 0x20 +#define DM_NUM_CHANNELS 4 +#define A_DM_BASE(idx) (A_DM_0 + ((idx) * DM_REGISTER_SPACING)) +#define A_DM_REGISTER(idx, reg) (A_DM_BASE(idx) + (reg)) + +#define R_DM_DSCR_BASE 0x0000000000 +#define R_DM_DSCR_COUNT 0x0000000008 +#define R_DM_CUR_DSCR_ADDR 0x0000000010 +#define R_DM_DSCR_BASE_DEBUG 0x0000000018 + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_DM_PARTIAL_0 0x0010020ba0 +#define A_DM_PARTIAL_1 0x0010020ba8 +#define A_DM_PARTIAL_2 0x0010020bb0 +#define A_DM_PARTIAL_3 0x0010020bb8 +#define DM_PARTIAL_REGISTER_SPACING 0x8 +#define A_DM_PARTIAL(idx) (A_DM_PARTIAL_0 + ((idx) * DM_PARTIAL_REGISTER_SPACING)) +#endif /* 1250 PASS3 || 112x PASS1 */ + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define A_DM_CRC_0 0x0010020b80 +#define A_DM_CRC_1 0x0010020b90 +#define DM_CRC_REGISTER_SPACING 0x10 +#define DM_CRC_NUM_CHANNELS 2 +#define A_DM_CRC_BASE(idx) (A_DM_CRC_0 + ((idx) * DM_CRC_REGISTER_SPACING)) +#define A_DM_CRC_REGISTER(idx, reg) (A_DM_CRC_BASE(idx) + (reg)) + +#define R_CRC_DEF_0 0x00 +#define R_CTCP_DEF_0 0x08 +#endif /* 1250 PASS3 || 112x PASS1 */ + +/* ********************************************************************* + * Physical Address Map + ********************************************************************* */ + +#if SIBYTE_HDR_FEATURE_1250_112x +#define A_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000) +#define A_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024)) +#define A_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000) +#define A_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000) +#define A_PHYS_GENBUS _SB_MAKE64(0x0010090000) +#define A_PHYS_GENBUS_END _SB_MAKE64(0x0040000000) +#define A_PHYS_LDTPCI_IO_MATCH_BYTES_32 _SB_MAKE64(0x0040000000) +#define A_PHYS_LDTPCI_IO_MATCH_BITS_32 _SB_MAKE64(0x0060000000) +#define A_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000) +#define A_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000) +#define A_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000) +#define A_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000) +#define A_PHYS_LDT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000) +#define A_PHYS_LDTPCI_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000) +#define A_PHYS_LDTPCI_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000) +#define A_PHYS_LDT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000) +#define A_PHYS_LDTPCI_IO_MATCH_BITS _SB_MAKE64(0x00FC000000) +#define A_PHYS_LDTPCI_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000) +#define A_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000) +#define A_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024)) +#define A_PHYS_LDT_EXP _SB_MAKE64(0x8000000000) +#define A_PHYS_PCI_FULLACCESS_BYTES _SB_MAKE64(0xF000000000) +#define A_PHYS_PCI_FULLACCESS_BITS _SB_MAKE64(0xF100000000) +#define A_PHYS_RESERVED _SB_MAKE64(0xF200000000) +#define A_PHYS_RESERVED_SPECIAL_LDT _SB_MAKE64(0xFD00000000) + +#define A_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000) +#define PHYS_L2CACHE_NUM_WAYS 4 +#define A_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000080000) +#define A_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0180000) +#define A_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D01A0000) +#define A_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D01C0000) +#define A_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D01E0000) +#endif + + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_scd.h b/arch/mips/include/asm/sibyte/sb1250_scd.h new file mode 100644 index 000000000000..e49c3e89b5ee --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_scd.h @@ -0,0 +1,654 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * SCD Constants and Macros File: sb1250_scd.h + * + * This module contains constants and macros useful for + * manipulating the System Control and Debug module on the 1250. + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003,2004,2005 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + +#ifndef _SB1250_SCD_H +#define _SB1250_SCD_H + +#include "sb1250_defs.h" + +/* ********************************************************************* + * System control/debug registers + ********************************************************************* */ + +/* + * System Revision Register (Table 4-1) + */ + +#define M_SYS_RESERVED _SB_MAKEMASK(8, 0) + +#define S_SYS_REVISION _SB_MAKE64(8) +#define M_SYS_REVISION _SB_MAKEMASK(8, S_SYS_REVISION) +#define V_SYS_REVISION(x) _SB_MAKEVALUE(x, S_SYS_REVISION) +#define G_SYS_REVISION(x) _SB_GETVALUE(x, S_SYS_REVISION, M_SYS_REVISION) + +#define K_SYS_REVISION_BCM1250_PASS1 0x01 + +#define K_SYS_REVISION_BCM1250_PASS2 0x03 +#define K_SYS_REVISION_BCM1250_A1 0x03 /* Pass 2.0 WB */ +#define K_SYS_REVISION_BCM1250_A2 0x04 /* Pass 2.0 FC */ +#define K_SYS_REVISION_BCM1250_A3 0x05 /* Pass 2.1 FC */ +#define K_SYS_REVISION_BCM1250_A4 0x06 /* Pass 2.1 WB */ +#define K_SYS_REVISION_BCM1250_A6 0x07 /* OR 0x04 (A2) w/WID != 0 */ +#define K_SYS_REVISION_BCM1250_A8 0x0b /* A8/A10 */ +#define K_SYS_REVISION_BCM1250_A9 0x08 +#define K_SYS_REVISION_BCM1250_A10 K_SYS_REVISION_BCM1250_A8 + +#define K_SYS_REVISION_BCM1250_PASS2_2 0x10 +#define K_SYS_REVISION_BCM1250_B0 K_SYS_REVISION_BCM1250_B1 +#define K_SYS_REVISION_BCM1250_B1 0x10 +#define K_SYS_REVISION_BCM1250_B2 0x11 + +#define K_SYS_REVISION_BCM1250_C0 0x20 +#define K_SYS_REVISION_BCM1250_C1 0x21 +#define K_SYS_REVISION_BCM1250_C2 0x22 +#define K_SYS_REVISION_BCM1250_C3 0x23 + +#if SIBYTE_HDR_FEATURE_CHIP(1250) +/* XXX: discourage people from using these constants. */ +#define K_SYS_REVISION_PASS1 K_SYS_REVISION_BCM1250_PASS1 +#define K_SYS_REVISION_PASS2 K_SYS_REVISION_BCM1250_PASS2 +#define K_SYS_REVISION_PASS2_2 K_SYS_REVISION_BCM1250_PASS2_2 +#define K_SYS_REVISION_PASS3 K_SYS_REVISION_BCM1250_PASS3 +#define K_SYS_REVISION_BCM1250_PASS3 K_SYS_REVISION_BCM1250_C0 +#endif /* 1250 */ + +#define K_SYS_REVISION_BCM112x_A1 0x20 +#define K_SYS_REVISION_BCM112x_A2 0x21 +#define K_SYS_REVISION_BCM112x_A3 0x22 +#define K_SYS_REVISION_BCM112x_A4 0x23 +#define K_SYS_REVISION_BCM112x_B0 0x30 + +#define K_SYS_REVISION_BCM1480_S0 0x01 +#define K_SYS_REVISION_BCM1480_A1 0x02 +#define K_SYS_REVISION_BCM1480_A2 0x03 +#define K_SYS_REVISION_BCM1480_A3 0x04 +#define K_SYS_REVISION_BCM1480_B0 0x11 + +/*Cache size - 23:20 of revision register*/ +#define S_SYS_L2C_SIZE _SB_MAKE64(20) +#define M_SYS_L2C_SIZE _SB_MAKEMASK(4, S_SYS_L2C_SIZE) +#define V_SYS_L2C_SIZE(x) _SB_MAKEVALUE(x, S_SYS_L2C_SIZE) +#define G_SYS_L2C_SIZE(x) _SB_GETVALUE(x, S_SYS_L2C_SIZE, M_SYS_L2C_SIZE) + +#define K_SYS_L2C_SIZE_1MB 0 +#define K_SYS_L2C_SIZE_512KB 5 +#define K_SYS_L2C_SIZE_256KB 2 +#define K_SYS_L2C_SIZE_128KB 1 + +#define K_SYS_L2C_SIZE_BCM1250 K_SYS_L2C_SIZE_512KB +#define K_SYS_L2C_SIZE_BCM1125 K_SYS_L2C_SIZE_256KB +#define K_SYS_L2C_SIZE_BCM1122 K_SYS_L2C_SIZE_128KB + + +/* Number of CPU cores, bits 27:24 of revision register*/ +#define S_SYS_NUM_CPUS _SB_MAKE64(24) +#define M_SYS_NUM_CPUS _SB_MAKEMASK(4, S_SYS_NUM_CPUS) +#define V_SYS_NUM_CPUS(x) _SB_MAKEVALUE(x, S_SYS_NUM_CPUS) +#define G_SYS_NUM_CPUS(x) _SB_GETVALUE(x, S_SYS_NUM_CPUS, M_SYS_NUM_CPUS) + + +/* XXX: discourage people from using these constants. */ +#define S_SYS_PART _SB_MAKE64(16) +#define M_SYS_PART _SB_MAKEMASK(16, S_SYS_PART) +#define V_SYS_PART(x) _SB_MAKEVALUE(x, S_SYS_PART) +#define G_SYS_PART(x) _SB_GETVALUE(x, S_SYS_PART, M_SYS_PART) + +/* XXX: discourage people from using these constants. */ +#define K_SYS_PART_SB1250 0x1250 +#define K_SYS_PART_BCM1120 0x1121 +#define K_SYS_PART_BCM1125 0x1123 +#define K_SYS_PART_BCM1125H 0x1124 +#define K_SYS_PART_BCM1122 0x1113 + + +/* The "peripheral set" (SOC type) is the low 4 bits of the "part" field. */ +#define S_SYS_SOC_TYPE _SB_MAKE64(16) +#define M_SYS_SOC_TYPE _SB_MAKEMASK(4, S_SYS_SOC_TYPE) +#define V_SYS_SOC_TYPE(x) _SB_MAKEVALUE(x, S_SYS_SOC_TYPE) +#define G_SYS_SOC_TYPE(x) _SB_GETVALUE(x, S_SYS_SOC_TYPE, M_SYS_SOC_TYPE) + +#define K_SYS_SOC_TYPE_BCM1250 0x0 +#define K_SYS_SOC_TYPE_BCM1120 0x1 +#define K_SYS_SOC_TYPE_BCM1250_ALT 0x2 /* 1250pass2 w/ 1/4 L2. */ +#define K_SYS_SOC_TYPE_BCM1125 0x3 +#define K_SYS_SOC_TYPE_BCM1125H 0x4 +#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5 /* 1250pass2 w/ 1/2 L2. */ +#define K_SYS_SOC_TYPE_BCM1x80 0x6 +#define K_SYS_SOC_TYPE_BCM1x55 0x7 + +/* + * Calculate correct SOC type given a copy of system revision register. + * + * (For the assembler version, sysrev and dest may be the same register. + * Also, it clobbers AT.) + */ +#ifdef __ASSEMBLER__ +#define SYS_SOC_TYPE(dest, sysrev) \ + .set push ; \ + .set reorder ; \ + dsrl dest, sysrev, S_SYS_SOC_TYPE ; \ + andi dest, dest, (M_SYS_SOC_TYPE >> S_SYS_SOC_TYPE); \ + beq dest, K_SYS_SOC_TYPE_BCM1250_ALT, 991f ; \ + beq dest, K_SYS_SOC_TYPE_BCM1250_ALT2, 991f ; \ + b 992f ; \ +991: li dest, K_SYS_SOC_TYPE_BCM1250 ; \ +992: \ + .set pop +#else +#define SYS_SOC_TYPE(sysrev) \ + ((G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT \ + || G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT2) \ + ? K_SYS_SOC_TYPE_BCM1250 : G_SYS_SOC_TYPE(sysrev)) +#endif + +#define S_SYS_WID _SB_MAKE64(32) +#define M_SYS_WID _SB_MAKEMASK(32, S_SYS_WID) +#define V_SYS_WID(x) _SB_MAKEVALUE(x, S_SYS_WID) +#define G_SYS_WID(x) _SB_GETVALUE(x, S_SYS_WID, M_SYS_WID) + +/* + * System Manufacturing Register + * Register: SCD_SYSTEM_MANUF + */ + +#if SIBYTE_HDR_FEATURE_1250_112x +/* Wafer ID: bits 31:0 */ +#define S_SYS_WAFERID1_200 _SB_MAKE64(0) +#define M_SYS_WAFERID1_200 _SB_MAKEMASK(32, S_SYS_WAFERID1_200) +#define V_SYS_WAFERID1_200(x) _SB_MAKEVALUE(x, S_SYS_WAFERID1_200) +#define G_SYS_WAFERID1_200(x) _SB_GETVALUE(x, S_SYS_WAFERID1_200, M_SYS_WAFERID1_200) + +#define S_SYS_BIN _SB_MAKE64(32) +#define M_SYS_BIN _SB_MAKEMASK(4, S_SYS_BIN) +#define V_SYS_BIN(x) _SB_MAKEVALUE(x, S_SYS_BIN) +#define G_SYS_BIN(x) _SB_GETVALUE(x, S_SYS_BIN, M_SYS_BIN) + +/* Wafer ID: bits 39:36 */ +#define S_SYS_WAFERID2_200 _SB_MAKE64(36) +#define M_SYS_WAFERID2_200 _SB_MAKEMASK(4, S_SYS_WAFERID2_200) +#define V_SYS_WAFERID2_200(x) _SB_MAKEVALUE(x, S_SYS_WAFERID2_200) +#define G_SYS_WAFERID2_200(x) _SB_GETVALUE(x, S_SYS_WAFERID2_200, M_SYS_WAFERID2_200) + +/* Wafer ID: bits 39:0 */ +#define S_SYS_WAFERID_300 _SB_MAKE64(0) +#define M_SYS_WAFERID_300 _SB_MAKEMASK(40, S_SYS_WAFERID_300) +#define V_SYS_WAFERID_300(x) _SB_MAKEVALUE(x, S_SYS_WAFERID_300) +#define G_SYS_WAFERID_300(x) _SB_GETVALUE(x, S_SYS_WAFERID_300, M_SYS_WAFERID_300) + +#define S_SYS_XPOS _SB_MAKE64(40) +#define M_SYS_XPOS _SB_MAKEMASK(6, S_SYS_XPOS) +#define V_SYS_XPOS(x) _SB_MAKEVALUE(x, S_SYS_XPOS) +#define G_SYS_XPOS(x) _SB_GETVALUE(x, S_SYS_XPOS, M_SYS_XPOS) + +#define S_SYS_YPOS _SB_MAKE64(46) +#define M_SYS_YPOS _SB_MAKEMASK(6, S_SYS_YPOS) +#define V_SYS_YPOS(x) _SB_MAKEVALUE(x, S_SYS_YPOS) +#define G_SYS_YPOS(x) _SB_GETVALUE(x, S_SYS_YPOS, M_SYS_YPOS) +#endif + + +/* + * System Config Register (Table 4-2) + * Register: SCD_SYSTEM_CFG + */ + +#if SIBYTE_HDR_FEATURE_1250_112x +#define M_SYS_LDT_PLL_BYP _SB_MAKEMASK1(3) +#define M_SYS_PCI_SYNC_TEST_MODE _SB_MAKEMASK1(4) +#define M_SYS_IOB0_DIV _SB_MAKEMASK1(5) +#define M_SYS_IOB1_DIV _SB_MAKEMASK1(6) + +#define S_SYS_PLL_DIV _SB_MAKE64(7) +#define M_SYS_PLL_DIV _SB_MAKEMASK(5, S_SYS_PLL_DIV) +#define V_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_SYS_PLL_DIV) +#define G_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_SYS_PLL_DIV, M_SYS_PLL_DIV) + +#define M_SYS_SER0_ENABLE _SB_MAKEMASK1(12) +#define M_SYS_SER0_RSTB_EN _SB_MAKEMASK1(13) +#define M_SYS_SER1_ENABLE _SB_MAKEMASK1(14) +#define M_SYS_SER1_RSTB_EN _SB_MAKEMASK1(15) +#define M_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) + +#define S_SYS_BOOT_MODE _SB_MAKE64(17) +#define M_SYS_BOOT_MODE _SB_MAKEMASK(2, S_SYS_BOOT_MODE) +#define V_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_SYS_BOOT_MODE) +#define G_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_SYS_BOOT_MODE, M_SYS_BOOT_MODE) +#define K_SYS_BOOT_MODE_ROM32 0 +#define K_SYS_BOOT_MODE_ROM8 1 +#define K_SYS_BOOT_MODE_SMBUS_SMALL 2 +#define K_SYS_BOOT_MODE_SMBUS_BIG 3 + +#define M_SYS_PCI_HOST _SB_MAKEMASK1(19) +#define M_SYS_PCI_ARBITER _SB_MAKEMASK1(20) +#define M_SYS_SOUTH_ON_LDT _SB_MAKEMASK1(21) +#define M_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) +#define M_SYS_GENCLK_EN _SB_MAKEMASK1(23) +#define M_SYS_LDT_TEST_EN _SB_MAKEMASK1(24) +#define M_SYS_GEN_PARITY_EN _SB_MAKEMASK1(25) + +#define S_SYS_CONFIG 26 +#define M_SYS_CONFIG _SB_MAKEMASK(6, S_SYS_CONFIG) +#define V_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_SYS_CONFIG) +#define G_SYS_CONFIG(x) _SB_GETVALUE(x, S_SYS_CONFIG, M_SYS_CONFIG) + +/* The following bits are writeable by JTAG only. */ + +#define M_SYS_CLKSTOP _SB_MAKEMASK1(32) +#define M_SYS_CLKSTEP _SB_MAKEMASK1(33) + +#define S_SYS_CLKCOUNT 34 +#define M_SYS_CLKCOUNT _SB_MAKEMASK(8, S_SYS_CLKCOUNT) +#define V_SYS_CLKCOUNT(x) _SB_MAKEVALUE(x, S_SYS_CLKCOUNT) +#define G_SYS_CLKCOUNT(x) _SB_GETVALUE(x, S_SYS_CLKCOUNT, M_SYS_CLKCOUNT) + +#define M_SYS_PLL_BYPASS _SB_MAKEMASK1(42) + +#define S_SYS_PLL_IREF 43 +#define M_SYS_PLL_IREF _SB_MAKEMASK(2, S_SYS_PLL_IREF) + +#define S_SYS_PLL_VCO 45 +#define M_SYS_PLL_VCO _SB_MAKEMASK(2, S_SYS_PLL_VCO) + +#define S_SYS_PLL_VREG 47 +#define M_SYS_PLL_VREG _SB_MAKEMASK(2, S_SYS_PLL_VREG) + +#define M_SYS_MEM_RESET _SB_MAKEMASK1(49) +#define M_SYS_L2C_RESET _SB_MAKEMASK1(50) +#define M_SYS_IO_RESET_0 _SB_MAKEMASK1(51) +#define M_SYS_IO_RESET_1 _SB_MAKEMASK1(52) +#define M_SYS_SCD_RESET _SB_MAKEMASK1(53) + +/* End of bits writable by JTAG only. */ + +#define M_SYS_CPU_RESET_0 _SB_MAKEMASK1(54) +#define M_SYS_CPU_RESET_1 _SB_MAKEMASK1(55) + +#define M_SYS_UNICPU0 _SB_MAKEMASK1(56) +#define M_SYS_UNICPU1 _SB_MAKEMASK1(57) + +#define M_SYS_SB_SOFTRES _SB_MAKEMASK1(58) +#define M_SYS_EXT_RESET _SB_MAKEMASK1(59) +#define M_SYS_SYSTEM_RESET _SB_MAKEMASK1(60) + +#define M_SYS_MISR_MODE _SB_MAKEMASK1(61) +#define M_SYS_MISR_RESET _SB_MAKEMASK1(62) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#define M_SYS_SW_FLAG _SB_MAKEMASK1(63) +#endif /* 1250 PASS2 || 112x PASS1 */ + +#endif + + +/* + * Mailbox Registers (Table 4-3) + * Registers: SCD_MBOX_CPU_x + */ + +#define S_MBOX_INT_3 0 +#define M_MBOX_INT_3 _SB_MAKEMASK(16, S_MBOX_INT_3) +#define S_MBOX_INT_2 16 +#define M_MBOX_INT_2 _SB_MAKEMASK(16, S_MBOX_INT_2) +#define S_MBOX_INT_1 32 +#define M_MBOX_INT_1 _SB_MAKEMASK(16, S_MBOX_INT_1) +#define S_MBOX_INT_0 48 +#define M_MBOX_INT_0 _SB_MAKEMASK(16, S_MBOX_INT_0) + +/* + * Watchdog Registers (Table 4-8) (Table 4-9) (Table 4-10) + * Registers: SCD_WDOG_INIT_CNT_x + */ + +#define V_SCD_WDOG_FREQ 1000000 + +#define S_SCD_WDOG_INIT 0 +#define M_SCD_WDOG_INIT _SB_MAKEMASK(23, S_SCD_WDOG_INIT) + +#define S_SCD_WDOG_CNT 0 +#define M_SCD_WDOG_CNT _SB_MAKEMASK(23, S_SCD_WDOG_CNT) + +#define S_SCD_WDOG_ENABLE 0 +#define M_SCD_WDOG_ENABLE _SB_MAKEMASK1(S_SCD_WDOG_ENABLE) + +#define S_SCD_WDOG_RESET_TYPE 2 +#define M_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(3, S_SCD_WDOG_RESET_TYPE) +#define V_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x, S_SCD_WDOG_RESET_TYPE) +#define G_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x, S_SCD_WDOG_RESET_TYPE, M_SCD_WDOG_RESET_TYPE) + +#define K_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ +#define K_SCD_WDOG_RESET_SOFT 1 +#define K_SCD_WDOG_RESET_CPU0 3 +#define K_SCD_WDOG_RESET_CPU1 5 +#define K_SCD_WDOG_RESET_BOTH_CPUS 7 + +/* This feature is present in 1250 C0 and later, but *not* in 112x A revs. */ +#if SIBYTE_HDR_FEATURE(1250, PASS3) +#define S_SCD_WDOG_HAS_RESET 8 +#define M_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(S_SCD_WDOG_HAS_RESET) +#endif + + +/* + * Timer Registers (Table 4-11) (Table 4-12) (Table 4-13) + */ + +#define V_SCD_TIMER_FREQ 1000000 + +#define S_SCD_TIMER_INIT 0 +#define M_SCD_TIMER_INIT _SB_MAKEMASK(23, S_SCD_TIMER_INIT) +#define V_SCD_TIMER_INIT(x) _SB_MAKEVALUE(x, S_SCD_TIMER_INIT) +#define G_SCD_TIMER_INIT(x) _SB_GETVALUE(x, S_SCD_TIMER_INIT, M_SCD_TIMER_INIT) + +#define V_SCD_TIMER_WIDTH 23 +#define S_SCD_TIMER_CNT 0 +#define M_SCD_TIMER_CNT _SB_MAKEMASK(V_SCD_TIMER_WIDTH, S_SCD_TIMER_CNT) +#define V_SCD_TIMER_CNT(x) _SB_MAKEVALUE(x, S_SCD_TIMER_CNT) +#define G_SCD_TIMER_CNT(x) _SB_GETVALUE(x, S_SCD_TIMER_CNT, M_SCD_TIMER_CNT) + +#define M_SCD_TIMER_ENABLE _SB_MAKEMASK1(0) +#define M_SCD_TIMER_MODE _SB_MAKEMASK1(1) +#define M_SCD_TIMER_MODE_CONTINUOUS M_SCD_TIMER_MODE + +/* + * System Performance Counters + */ + +#define S_SPC_CFG_SRC0 0 +#define M_SPC_CFG_SRC0 _SB_MAKEMASK(8, S_SPC_CFG_SRC0) +#define V_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC0) +#define G_SPC_CFG_SRC0(x) _SB_GETVALUE(x, S_SPC_CFG_SRC0, M_SPC_CFG_SRC0) + +#define S_SPC_CFG_SRC1 8 +#define M_SPC_CFG_SRC1 _SB_MAKEMASK(8, S_SPC_CFG_SRC1) +#define V_SPC_CFG_SRC1(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC1) +#define G_SPC_CFG_SRC1(x) _SB_GETVALUE(x, S_SPC_CFG_SRC1, M_SPC_CFG_SRC1) + +#define S_SPC_CFG_SRC2 16 +#define M_SPC_CFG_SRC2 _SB_MAKEMASK(8, S_SPC_CFG_SRC2) +#define V_SPC_CFG_SRC2(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC2) +#define G_SPC_CFG_SRC2(x) _SB_GETVALUE(x, S_SPC_CFG_SRC2, M_SPC_CFG_SRC2) + +#define S_SPC_CFG_SRC3 24 +#define M_SPC_CFG_SRC3 _SB_MAKEMASK(8, S_SPC_CFG_SRC3) +#define V_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC3) +#define G_SPC_CFG_SRC3(x) _SB_GETVALUE(x, S_SPC_CFG_SRC3, M_SPC_CFG_SRC3) + +#if SIBYTE_HDR_FEATURE_1250_112x +#define M_SPC_CFG_CLEAR _SB_MAKEMASK1(32) +#define M_SPC_CFG_ENABLE _SB_MAKEMASK1(33) +#endif + + +/* + * Bus Watcher + */ + +#define S_SCD_BERR_TID 8 +#define M_SCD_BERR_TID _SB_MAKEMASK(10, S_SCD_BERR_TID) +#define V_SCD_BERR_TID(x) _SB_MAKEVALUE(x, S_SCD_BERR_TID) +#define G_SCD_BERR_TID(x) _SB_GETVALUE(x, S_SCD_BERR_TID, M_SCD_BERR_TID) + +#define S_SCD_BERR_RID 18 +#define M_SCD_BERR_RID _SB_MAKEMASK(4, S_SCD_BERR_RID) +#define V_SCD_BERR_RID(x) _SB_MAKEVALUE(x, S_SCD_BERR_RID) +#define G_SCD_BERR_RID(x) _SB_GETVALUE(x, S_SCD_BERR_RID, M_SCD_BERR_RID) + +#define S_SCD_BERR_DCODE 22 +#define M_SCD_BERR_DCODE _SB_MAKEMASK(3, S_SCD_BERR_DCODE) +#define V_SCD_BERR_DCODE(x) _SB_MAKEVALUE(x, S_SCD_BERR_DCODE) +#define G_SCD_BERR_DCODE(x) _SB_GETVALUE(x, S_SCD_BERR_DCODE, M_SCD_BERR_DCODE) + +#define M_SCD_BERR_MULTERRS _SB_MAKEMASK1(30) + + +#define S_SCD_L2ECC_CORR_D 0 +#define M_SCD_L2ECC_CORR_D _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_D) +#define V_SCD_L2ECC_CORR_D(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_D) +#define G_SCD_L2ECC_CORR_D(x) _SB_GETVALUE(x, S_SCD_L2ECC_CORR_D, M_SCD_L2ECC_CORR_D) + +#define S_SCD_L2ECC_BAD_D 8 +#define M_SCD_L2ECC_BAD_D _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_D) +#define V_SCD_L2ECC_BAD_D(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_D) +#define G_SCD_L2ECC_BAD_D(x) _SB_GETVALUE(x, S_SCD_L2ECC_BAD_D, M_SCD_L2ECC_BAD_D) + +#define S_SCD_L2ECC_CORR_T 16 +#define M_SCD_L2ECC_CORR_T _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_T) +#define V_SCD_L2ECC_CORR_T(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_T) +#define G_SCD_L2ECC_CORR_T(x) _SB_GETVALUE(x, S_SCD_L2ECC_CORR_T, M_SCD_L2ECC_CORR_T) + +#define S_SCD_L2ECC_BAD_T 24 +#define M_SCD_L2ECC_BAD_T _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_T) +#define V_SCD_L2ECC_BAD_T(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_T) +#define G_SCD_L2ECC_BAD_T(x) _SB_GETVALUE(x, S_SCD_L2ECC_BAD_T, M_SCD_L2ECC_BAD_T) + +#define S_SCD_MEM_ECC_CORR 0 +#define M_SCD_MEM_ECC_CORR _SB_MAKEMASK(8, S_SCD_MEM_ECC_CORR) +#define V_SCD_MEM_ECC_CORR(x) _SB_MAKEVALUE(x, S_SCD_MEM_ECC_CORR) +#define G_SCD_MEM_ECC_CORR(x) _SB_GETVALUE(x, S_SCD_MEM_ECC_CORR, M_SCD_MEM_ECC_CORR) + +#define S_SCD_MEM_ECC_BAD 8 +#define M_SCD_MEM_ECC_BAD _SB_MAKEMASK(8, S_SCD_MEM_ECC_BAD) +#define V_SCD_MEM_ECC_BAD(x) _SB_MAKEVALUE(x, S_SCD_MEM_ECC_BAD) +#define G_SCD_MEM_ECC_BAD(x) _SB_GETVALUE(x, S_SCD_MEM_ECC_BAD, M_SCD_MEM_ECC_BAD) + +#define S_SCD_MEM_BUSERR 16 +#define M_SCD_MEM_BUSERR _SB_MAKEMASK(8, S_SCD_MEM_BUSERR) +#define V_SCD_MEM_BUSERR(x) _SB_MAKEVALUE(x, S_SCD_MEM_BUSERR) +#define G_SCD_MEM_BUSERR(x) _SB_GETVALUE(x, S_SCD_MEM_BUSERR, M_SCD_MEM_BUSERR) + + +/* + * Address Trap Registers + */ + +#if SIBYTE_HDR_FEATURE_1250_112x +#define M_ATRAP_INDEX _SB_MAKEMASK(4, 0) +#define M_ATRAP_ADDRESS _SB_MAKEMASK(40, 0) + +#define S_ATRAP_CFG_CNT 0 +#define M_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_ATRAP_CFG_CNT) +#define V_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_CNT) +#define G_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_ATRAP_CFG_CNT, M_ATRAP_CFG_CNT) + +#define M_ATRAP_CFG_WRITE _SB_MAKEMASK1(3) +#define M_ATRAP_CFG_ALL _SB_MAKEMASK1(4) +#define M_ATRAP_CFG_INV _SB_MAKEMASK1(5) +#define M_ATRAP_CFG_USESRC _SB_MAKEMASK1(6) +#define M_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7) + +#define S_ATRAP_CFG_AGENTID 8 +#define M_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_ATRAP_CFG_AGENTID) +#define V_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_AGENTID) +#define G_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_ATRAP_CFG_AGENTID, M_ATRAP_CFG_AGENTID) + +#define K_BUS_AGENT_CPU0 0 +#define K_BUS_AGENT_CPU1 1 +#define K_BUS_AGENT_IOB0 2 +#define K_BUS_AGENT_IOB1 3 +#define K_BUS_AGENT_SCD 4 +#define K_BUS_AGENT_L2C 6 +#define K_BUS_AGENT_MC 7 + +#define S_ATRAP_CFG_CATTR 12 +#define M_ATRAP_CFG_CATTR _SB_MAKEMASK(3, S_ATRAP_CFG_CATTR) +#define V_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_CATTR) +#define G_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_ATRAP_CFG_CATTR, M_ATRAP_CFG_CATTR) + +#define K_ATRAP_CFG_CATTR_IGNORE 0 +#define K_ATRAP_CFG_CATTR_UNC 1 +#define K_ATRAP_CFG_CATTR_CACHEABLE 2 +#define K_ATRAP_CFG_CATTR_NONCOH 3 +#define K_ATRAP_CFG_CATTR_COHERENT 4 +#define K_ATRAP_CFG_CATTR_NOTUNC 5 +#define K_ATRAP_CFG_CATTR_NOTNONCOH 6 +#define K_ATRAP_CFG_CATTR_NOTCOHERENT 7 + +#endif /* 1250/112x */ + +/* + * Trace Buffer Config register + */ + +#define M_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0) +#define M_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1) +#define M_SCD_TRACE_CFG_START _SB_MAKEMASK1(2) +#define M_SCD_TRACE_CFG_STOP _SB_MAKEMASK1(3) +#define M_SCD_TRACE_CFG_FREEZE _SB_MAKEMASK1(4) +#define M_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5) +#define M_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6) +#define M_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_SCD_TRACE_CFG_FORCECNT _SB_MAKEMASK1(8) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +/* + * This field is the same on the 1250/112x and 1480, just located in + * a slightly different place in the register. + */ +#if SIBYTE_HDR_FEATURE_1250_112x +#define S_SCD_TRACE_CFG_CUR_ADDR 10 +#else +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_SCD_TRACE_CFG_CUR_ADDR 24 +#endif /* 1480 */ +#endif /* 1250/112x */ + +#define M_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8, S_SCD_TRACE_CFG_CUR_ADDR) +#define V_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR) +#define G_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR, M_SCD_TRACE_CFG_CUR_ADDR) + +/* + * Trace Event registers + */ + +#define S_SCD_TREVT_ADDR_MATCH 0 +#define M_SCD_TREVT_ADDR_MATCH _SB_MAKEMASK(4, S_SCD_TREVT_ADDR_MATCH) +#define V_SCD_TREVT_ADDR_MATCH(x) _SB_MAKEVALUE(x, S_SCD_TREVT_ADDR_MATCH) +#define G_SCD_TREVT_ADDR_MATCH(x) _SB_GETVALUE(x, S_SCD_TREVT_ADDR_MATCH, M_SCD_TREVT_ADDR_MATCH) + +#define M_SCD_TREVT_REQID_MATCH _SB_MAKEMASK1(4) +#define M_SCD_TREVT_DATAID_MATCH _SB_MAKEMASK1(5) +#define M_SCD_TREVT_RESPID_MATCH _SB_MAKEMASK1(6) +#define M_SCD_TREVT_INTERRUPT _SB_MAKEMASK1(7) +#define M_SCD_TREVT_DEBUG_PIN _SB_MAKEMASK1(9) +#define M_SCD_TREVT_WRITE _SB_MAKEMASK1(10) +#define M_SCD_TREVT_READ _SB_MAKEMASK1(11) + +#define S_SCD_TREVT_REQID 12 +#define M_SCD_TREVT_REQID _SB_MAKEMASK(4, S_SCD_TREVT_REQID) +#define V_SCD_TREVT_REQID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_REQID) +#define G_SCD_TREVT_REQID(x) _SB_GETVALUE(x, S_SCD_TREVT_REQID, M_SCD_TREVT_REQID) + +#define S_SCD_TREVT_RESPID 16 +#define M_SCD_TREVT_RESPID _SB_MAKEMASK(4, S_SCD_TREVT_RESPID) +#define V_SCD_TREVT_RESPID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_RESPID) +#define G_SCD_TREVT_RESPID(x) _SB_GETVALUE(x, S_SCD_TREVT_RESPID, M_SCD_TREVT_RESPID) + +#define S_SCD_TREVT_DATAID 20 +#define M_SCD_TREVT_DATAID _SB_MAKEMASK(4, S_SCD_TREVT_DATAID) +#define V_SCD_TREVT_DATAID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_DATAID) +#define G_SCD_TREVT_DATAID(x) _SB_GETVALUE(x, S_SCD_TREVT_DATAID, M_SCD_TREVT_DATID) + +#define S_SCD_TREVT_COUNT 24 +#define M_SCD_TREVT_COUNT _SB_MAKEMASK(8, S_SCD_TREVT_COUNT) +#define V_SCD_TREVT_COUNT(x) _SB_MAKEVALUE(x, S_SCD_TREVT_COUNT) +#define G_SCD_TREVT_COUNT(x) _SB_GETVALUE(x, S_SCD_TREVT_COUNT, M_SCD_TREVT_COUNT) + +/* + * Trace Sequence registers + */ + +#define S_SCD_TRSEQ_EVENT4 0 +#define M_SCD_TRSEQ_EVENT4 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT4) +#define V_SCD_TRSEQ_EVENT4(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT4) +#define G_SCD_TRSEQ_EVENT4(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT4, M_SCD_TRSEQ_EVENT4) + +#define S_SCD_TRSEQ_EVENT3 4 +#define M_SCD_TRSEQ_EVENT3 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT3) +#define V_SCD_TRSEQ_EVENT3(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT3) +#define G_SCD_TRSEQ_EVENT3(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT3, M_SCD_TRSEQ_EVENT3) + +#define S_SCD_TRSEQ_EVENT2 8 +#define M_SCD_TRSEQ_EVENT2 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT2) +#define V_SCD_TRSEQ_EVENT2(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT2) +#define G_SCD_TRSEQ_EVENT2(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT2, M_SCD_TRSEQ_EVENT2) + +#define S_SCD_TRSEQ_EVENT1 12 +#define M_SCD_TRSEQ_EVENT1 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT1) +#define V_SCD_TRSEQ_EVENT1(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT1) +#define G_SCD_TRSEQ_EVENT1(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT1, M_SCD_TRSEQ_EVENT1) + +#define K_SCD_TRSEQ_E0 0 +#define K_SCD_TRSEQ_E1 1 +#define K_SCD_TRSEQ_E2 2 +#define K_SCD_TRSEQ_E3 3 +#define K_SCD_TRSEQ_E0_E1 4 +#define K_SCD_TRSEQ_E1_E2 5 +#define K_SCD_TRSEQ_E2_E3 6 +#define K_SCD_TRSEQ_E0_E1_E2 7 +#define K_SCD_TRSEQ_E0_E1_E2_E3 8 +#define K_SCD_TRSEQ_E0E1 9 +#define K_SCD_TRSEQ_E0E1E2 10 +#define K_SCD_TRSEQ_E0E1E2E3 11 +#define K_SCD_TRSEQ_E0E1_E2 12 +#define K_SCD_TRSEQ_E0E1_E2E3 13 +#define K_SCD_TRSEQ_E0E1_E2_E3 14 +#define K_SCD_TRSEQ_IGNORED 15 + +#define K_SCD_TRSEQ_TRIGGER_ALL (V_SCD_TRSEQ_EVENT1(K_SCD_TRSEQ_IGNORED) | \ + V_SCD_TRSEQ_EVENT2(K_SCD_TRSEQ_IGNORED) | \ + V_SCD_TRSEQ_EVENT3(K_SCD_TRSEQ_IGNORED) | \ + V_SCD_TRSEQ_EVENT4(K_SCD_TRSEQ_IGNORED)) + +#define S_SCD_TRSEQ_FUNCTION 16 +#define M_SCD_TRSEQ_FUNCTION _SB_MAKEMASK(4, S_SCD_TRSEQ_FUNCTION) +#define V_SCD_TRSEQ_FUNCTION(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_FUNCTION) +#define G_SCD_TRSEQ_FUNCTION(x) _SB_GETVALUE(x, S_SCD_TRSEQ_FUNCTION, M_SCD_TRSEQ_FUNCTION) + +#define K_SCD_TRSEQ_FUNC_NOP 0 +#define K_SCD_TRSEQ_FUNC_START 1 +#define K_SCD_TRSEQ_FUNC_STOP 2 +#define K_SCD_TRSEQ_FUNC_FREEZE 3 + +#define V_SCD_TRSEQ_FUNC_NOP V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_NOP) +#define V_SCD_TRSEQ_FUNC_START V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_START) +#define V_SCD_TRSEQ_FUNC_STOP V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_STOP) +#define V_SCD_TRSEQ_FUNC_FREEZE V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_FREEZE) + +#define M_SCD_TRSEQ_ASAMPLE _SB_MAKEMASK1(18) +#define M_SCD_TRSEQ_DSAMPLE _SB_MAKEMASK1(19) +#define M_SCD_TRSEQ_DEBUGPIN _SB_MAKEMASK1(20) +#define M_SCD_TRSEQ_DEBUGCPU _SB_MAKEMASK1(21) +#define M_SCD_TRSEQ_CLEARUSE _SB_MAKEMASK1(22) +#define M_SCD_TRSEQ_ALLD_A _SB_MAKEMASK1(23) +#define M_SCD_TRSEQ_ALL_A _SB_MAKEMASK1(24) + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_smbus.h b/arch/mips/include/asm/sibyte/sb1250_smbus.h new file mode 100644 index 000000000000..04769923cf1e --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_smbus.h @@ -0,0 +1,204 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * SMBUS Constants File: sb1250_smbus.h + * + * This module contains constants and macros useful for + * manipulating the SB1250's SMbus devices. + * + * SB1250 specification level: 10/21/02 + * BCM1280 specification level: 11/24/03 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_SMBUS_H +#define _SB1250_SMBUS_H + +#include "sb1250_defs.h" + +/* + * SMBus Clock Frequency Register (Table 14-2) + */ + +#define S_SMB_FREQ_DIV 0 +#define M_SMB_FREQ_DIV _SB_MAKEMASK(13, S_SMB_FREQ_DIV) +#define V_SMB_FREQ_DIV(x) _SB_MAKEVALUE(x, S_SMB_FREQ_DIV) + +#define K_SMB_FREQ_400KHZ 0x1F +#define K_SMB_FREQ_100KHZ 0x7D +#define K_SMB_FREQ_10KHZ 1250 + +#define S_SMB_CMD 0 +#define M_SMB_CMD _SB_MAKEMASK(8, S_SMB_CMD) +#define V_SMB_CMD(x) _SB_MAKEVALUE(x, S_SMB_CMD) + +/* + * SMBus control register (Table 14-4) + */ + +#define M_SMB_ERR_INTR _SB_MAKEMASK1(0) +#define M_SMB_FINISH_INTR _SB_MAKEMASK1(1) + +#define S_SMB_DATA_OUT 4 +#define M_SMB_DATA_OUT _SB_MAKEMASK1(S_SMB_DATA_OUT) +#define V_SMB_DATA_OUT(x) _SB_MAKEVALUE(x, S_SMB_DATA_OUT) + +#define M_SMB_DATA_DIR _SB_MAKEMASK1(5) +#define M_SMB_DATA_DIR_OUTPUT M_SMB_DATA_DIR +#define M_SMB_CLK_OUT _SB_MAKEMASK1(6) +#define M_SMB_DIRECT_ENABLE _SB_MAKEMASK1(7) + +/* + * SMBus status registers (Table 14-5) + */ + +#define M_SMB_BUSY _SB_MAKEMASK1(0) +#define M_SMB_ERROR _SB_MAKEMASK1(1) +#define M_SMB_ERROR_TYPE _SB_MAKEMASK1(2) + +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_SMB_SCL_IN 5 +#define M_SMB_SCL_IN _SB_MAKEMASK1(S_SMB_SCL_IN) +#define V_SMB_SCL_IN(x) _SB_MAKEVALUE(x, S_SMB_SCL_IN) +#define G_SMB_SCL_IN(x) _SB_GETVALUE(x, S_SMB_SCL_IN, M_SMB_SCL_IN) +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ + +#define S_SMB_REF 6 +#define M_SMB_REF _SB_MAKEMASK1(S_SMB_REF) +#define V_SMB_REF(x) _SB_MAKEVALUE(x, S_SMB_REF) +#define G_SMB_REF(x) _SB_GETVALUE(x, S_SMB_REF, M_SMB_REF) + +#define S_SMB_DATA_IN 7 +#define M_SMB_DATA_IN _SB_MAKEMASK1(S_SMB_DATA_IN) +#define V_SMB_DATA_IN(x) _SB_MAKEVALUE(x, S_SMB_DATA_IN) +#define G_SMB_DATA_IN(x) _SB_GETVALUE(x, S_SMB_DATA_IN, M_SMB_DATA_IN) + +/* + * SMBus Start/Command registers (Table 14-9) + */ + +#define S_SMB_ADDR 0 +#define M_SMB_ADDR _SB_MAKEMASK(7, S_SMB_ADDR) +#define V_SMB_ADDR(x) _SB_MAKEVALUE(x, S_SMB_ADDR) +#define G_SMB_ADDR(x) _SB_GETVALUE(x, S_SMB_ADDR, M_SMB_ADDR) + +#define M_SMB_QDATA _SB_MAKEMASK1(7) + +#define S_SMB_TT 8 +#define M_SMB_TT _SB_MAKEMASK(3, S_SMB_TT) +#define V_SMB_TT(x) _SB_MAKEVALUE(x, S_SMB_TT) +#define G_SMB_TT(x) _SB_GETVALUE(x, S_SMB_TT, M_SMB_TT) + +#define K_SMB_TT_WR1BYTE 0 +#define K_SMB_TT_WR2BYTE 1 +#define K_SMB_TT_WR3BYTE 2 +#define K_SMB_TT_CMD_RD1BYTE 3 +#define K_SMB_TT_CMD_RD2BYTE 4 +#define K_SMB_TT_RD1BYTE 5 +#define K_SMB_TT_QUICKCMD 6 +#define K_SMB_TT_EEPROMREAD 7 + +#define V_SMB_TT_WR1BYTE V_SMB_TT(K_SMB_TT_WR1BYTE) +#define V_SMB_TT_WR2BYTE V_SMB_TT(K_SMB_TT_WR2BYTE) +#define V_SMB_TT_WR3BYTE V_SMB_TT(K_SMB_TT_WR3BYTE) +#define V_SMB_TT_CMD_RD1BYTE V_SMB_TT(K_SMB_TT_CMD_RD1BYTE) +#define V_SMB_TT_CMD_RD2BYTE V_SMB_TT(K_SMB_TT_CMD_RD2BYTE) +#define V_SMB_TT_RD1BYTE V_SMB_TT(K_SMB_TT_RD1BYTE) +#define V_SMB_TT_QUICKCMD V_SMB_TT(K_SMB_TT_QUICKCMD) +#define V_SMB_TT_EEPROMREAD V_SMB_TT(K_SMB_TT_EEPROMREAD) + +#define M_SMB_PEC _SB_MAKEMASK1(15) + +/* + * SMBus Data Register (Table 14-6) and SMBus Extra Register (Table 14-7) + */ + +#define S_SMB_LB 0 +#define M_SMB_LB _SB_MAKEMASK(8, S_SMB_LB) +#define V_SMB_LB(x) _SB_MAKEVALUE(x, S_SMB_LB) + +#define S_SMB_MB 8 +#define M_SMB_MB _SB_MAKEMASK(8, S_SMB_MB) +#define V_SMB_MB(x) _SB_MAKEVALUE(x, S_SMB_MB) + + +/* + * SMBus Packet Error Check register (Table 14-8) + */ + +#define S_SPEC_PEC 0 +#define M_SPEC_PEC _SB_MAKEMASK(8, S_SPEC_PEC) +#define V_SPEC_MB(x) _SB_MAKEVALUE(x, S_SPEC_PEC) + + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) + +#define S_SMB_CMDH 8 +#define M_SMB_CMDH _SB_MAKEMASK(8, S_SMB_CMDH) +#define V_SMB_CMDH(x) _SB_MAKEVALUE(x, S_SMB_CMDH) + +#define M_SMB_EXTEND _SB_MAKEMASK1(14) + +#define S_SMB_DFMT 8 +#define M_SMB_DFMT _SB_MAKEMASK(3, S_SMB_DFMT) +#define V_SMB_DFMT(x) _SB_MAKEVALUE(x, S_SMB_DFMT) +#define G_SMB_DFMT(x) _SB_GETVALUE(x, S_SMB_DFMT, M_SMB_DFMT) + +#define K_SMB_DFMT_1BYTE 0 +#define K_SMB_DFMT_2BYTE 1 +#define K_SMB_DFMT_3BYTE 2 +#define K_SMB_DFMT_4BYTE 3 +#define K_SMB_DFMT_NODATA 4 +#define K_SMB_DFMT_CMD4BYTE 5 +#define K_SMB_DFMT_CMD5BYTE 6 +#define K_SMB_DFMT_RESERVED 7 + +#define V_SMB_DFMT_1BYTE V_SMB_DFMT(K_SMB_DFMT_1BYTE) +#define V_SMB_DFMT_2BYTE V_SMB_DFMT(K_SMB_DFMT_2BYTE) +#define V_SMB_DFMT_3BYTE V_SMB_DFMT(K_SMB_DFMT_3BYTE) +#define V_SMB_DFMT_4BYTE V_SMB_DFMT(K_SMB_DFMT_4BYTE) +#define V_SMB_DFMT_NODATA V_SMB_DFMT(K_SMB_DFMT_NODATA) +#define V_SMB_DFMT_CMD4BYTE V_SMB_DFMT(K_SMB_DFMT_CMD4BYTE) +#define V_SMB_DFMT_CMD5BYTE V_SMB_DFMT(K_SMB_DFMT_CMD5BYTE) +#define V_SMB_DFMT_RESERVED V_SMB_DFMT(K_SMB_DFMT_RESERVED) + +#define S_SMB_AFMT 11 +#define M_SMB_AFMT _SB_MAKEMASK(2, S_SMB_AFMT) +#define V_SMB_AFMT(x) _SB_MAKEVALUE(x, S_SMB_AFMT) +#define G_SMB_AFMT(x) _SB_GETVALUE(x, S_SMB_AFMT, M_SMB_AFMT) + +#define K_SMB_AFMT_NONE 0 +#define K_SMB_AFMT_ADDR 1 +#define K_SMB_AFMT_ADDR_CMD1BYTE 2 +#define K_SMB_AFMT_ADDR_CMD2BYTE 3 + +#define V_SMB_AFMT_NONE V_SMB_AFMT(K_SMB_AFMT_NONE) +#define V_SMB_AFMT_ADDR V_SMB_AFMT(K_SMB_AFMT_ADDR) +#define V_SMB_AFMT_ADDR_CMD1BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD1BYTE) +#define V_SMB_AFMT_ADDR_CMD2BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD2BYTE) + +#define M_SMB_DIR _SB_MAKEMASK1(13) + +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_syncser.h b/arch/mips/include/asm/sibyte/sb1250_syncser.h new file mode 100644 index 000000000000..d4b8558e0bf1 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_syncser.h @@ -0,0 +1,146 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * Synchronous Serial Constants File: sb1250_syncser.h + * + * This module contains constants and macros useful for + * manipulating the SB1250's Synchronous Serial + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_SYNCSER_H +#define _SB1250_SYNCSER_H + +#include "sb1250_defs.h" + +/* + * Serial Mode Configuration Register + */ + +#define M_SYNCSER_CRC_MODE _SB_MAKEMASK1(0) +#define M_SYNCSER_MSB_FIRST _SB_MAKEMASK1(1) + +#define S_SYNCSER_FLAG_NUM 2 +#define M_SYNCSER_FLAG_NUM _SB_MAKEMASK(4, S_SYNCSER_FLAG_NUM) +#define V_SYNCSER_FLAG_NUM _SB_MAKEVALUE(x, S_SYNCSER_FLAG_NUM) + +#define M_SYNCSER_FLAG_EN _SB_MAKEMASK1(6) +#define M_SYNCSER_HDLC_EN _SB_MAKEMASK1(7) +#define M_SYNCSER_LOOP_MODE _SB_MAKEMASK1(8) +#define M_SYNCSER_LOOPBACK _SB_MAKEMASK1(9) + +/* + * Serial Clock Source and Line Interface Mode Register + */ + +#define M_SYNCSER_RXCLK_INV _SB_MAKEMASK1(0) +#define M_SYNCSER_RXCLK_EXT _SB_MAKEMASK1(1) + +#define S_SYNCSER_RXSYNC_DLY 2 +#define M_SYNCSER_RXSYNC_DLY _SB_MAKEMASK(2, S_SYNCSER_RXSYNC_DLY) +#define V_SYNCSER_RXSYNC_DLY(x) _SB_MAKEVALUE(x, S_SYNCSER_RXSYNC_DLY) + +#define M_SYNCSER_RXSYNC_LOW _SB_MAKEMASK1(4) +#define M_SYNCSER_RXSTRB_LOW _SB_MAKEMASK1(5) + +#define M_SYNCSER_RXSYNC_EDGE _SB_MAKEMASK1(6) +#define M_SYNCSER_RXSYNC_INT _SB_MAKEMASK1(7) + +#define M_SYNCSER_TXCLK_INV _SB_MAKEMASK1(8) +#define M_SYNCSER_TXCLK_EXT _SB_MAKEMASK1(9) + +#define S_SYNCSER_TXSYNC_DLY 10 +#define M_SYNCSER_TXSYNC_DLY _SB_MAKEMASK(2, S_SYNCSER_TXSYNC_DLY) +#define V_SYNCSER_TXSYNC_DLY(x) _SB_MAKEVALUE(x, S_SYNCSER_TXSYNC_DLY) + +#define M_SYNCSER_TXSYNC_LOW _SB_MAKEMASK1(12) +#define M_SYNCSER_TXSTRB_LOW _SB_MAKEMASK1(13) + +#define M_SYNCSER_TXSYNC_EDGE _SB_MAKEMASK1(14) +#define M_SYNCSER_TXSYNC_INT _SB_MAKEMASK1(15) + +/* + * Serial Command Register + */ + +#define M_SYNCSER_CMD_RX_EN _SB_MAKEMASK1(0) +#define M_SYNCSER_CMD_TX_EN _SB_MAKEMASK1(1) +#define M_SYNCSER_CMD_RX_RESET _SB_MAKEMASK1(2) +#define M_SYNCSER_CMD_TX_RESET _SB_MAKEMASK1(3) +#define M_SYNCSER_CMD_TX_PAUSE _SB_MAKEMASK1(5) + +/* + * Serial DMA Enable Register + */ + +#define M_SYNCSER_DMA_RX_EN _SB_MAKEMASK1(0) +#define M_SYNCSER_DMA_TX_EN _SB_MAKEMASK1(4) + +/* + * Serial Status Register + */ + +#define M_SYNCSER_RX_CRCERR _SB_MAKEMASK1(0) +#define M_SYNCSER_RX_ABORT _SB_MAKEMASK1(1) +#define M_SYNCSER_RX_OCTET _SB_MAKEMASK1(2) +#define M_SYNCSER_RX_LONGFRM _SB_MAKEMASK1(3) +#define M_SYNCSER_RX_SHORTFRM _SB_MAKEMASK1(4) +#define M_SYNCSER_RX_OVERRUN _SB_MAKEMASK1(5) +#define M_SYNCSER_RX_SYNC_ERR _SB_MAKEMASK1(6) +#define M_SYNCSER_TX_CRCERR _SB_MAKEMASK1(8) +#define M_SYNCSER_TX_UNDERRUN _SB_MAKEMASK1(9) +#define M_SYNCSER_TX_SYNC_ERR _SB_MAKEMASK1(10) +#define M_SYNCSER_TX_PAUSE_COMPLETE _SB_MAKEMASK1(11) +#define M_SYNCSER_RX_EOP_COUNT _SB_MAKEMASK1(16) +#define M_SYNCSER_RX_EOP_TIMER _SB_MAKEMASK1(17) +#define M_SYNCSER_RX_EOP_SEEN _SB_MAKEMASK1(18) +#define M_SYNCSER_RX_HWM _SB_MAKEMASK1(19) +#define M_SYNCSER_RX_LWM _SB_MAKEMASK1(20) +#define M_SYNCSER_RX_DSCR _SB_MAKEMASK1(21) +#define M_SYNCSER_RX_DERR _SB_MAKEMASK1(22) +#define M_SYNCSER_TX_EOP_COUNT _SB_MAKEMASK1(24) +#define M_SYNCSER_TX_EOP_TIMER _SB_MAKEMASK1(25) +#define M_SYNCSER_TX_EOP_SEEN _SB_MAKEMASK1(26) +#define M_SYNCSER_TX_HWM _SB_MAKEMASK1(27) +#define M_SYNCSER_TX_LWM _SB_MAKEMASK1(28) +#define M_SYNCSER_TX_DSCR _SB_MAKEMASK1(29) +#define M_SYNCSER_TX_DERR _SB_MAKEMASK1(30) +#define M_SYNCSER_TX_DZERO _SB_MAKEMASK1(31) + +/* + * Sequencer Table Entry format + */ + +#define M_SYNCSER_SEQ_LAST _SB_MAKEMASK1(0) +#define M_SYNCSER_SEQ_BYTE _SB_MAKEMASK1(1) + +#define S_SYNCSER_SEQ_COUNT 2 +#define M_SYNCSER_SEQ_COUNT _SB_MAKEMASK(4, S_SYNCSER_SEQ_COUNT) +#define V_SYNCSER_SEQ_COUNT(x) _SB_MAKEVALUE(x, S_SYNCSER_SEQ_COUNT) + +#define M_SYNCSER_SEQ_ENABLE _SB_MAKEMASK1(6) +#define M_SYNCSER_SEQ_STROBE _SB_MAKEMASK1(7) + +#endif diff --git a/arch/mips/include/asm/sibyte/sb1250_uart.h b/arch/mips/include/asm/sibyte/sb1250_uart.h new file mode 100644 index 000000000000..d835bf280140 --- /dev/null +++ b/arch/mips/include/asm/sibyte/sb1250_uart.h @@ -0,0 +1,362 @@ +/* ********************************************************************* + * SB1250 Board Support Package + * + * UART Constants File: sb1250_uart.h + * + * This module contains constants and macros useful for + * manipulating the SB1250's UARTs + * + * SB1250 specification level: User's manual 1/02/02 + * + ********************************************************************* + * + * Copyright 2000,2001,2002,2003 + * Broadcom Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + ********************************************************************* */ + + +#ifndef _SB1250_UART_H +#define _SB1250_UART_H + +#include "sb1250_defs.h" + +/* ********************************************************************** + * DUART Registers + ********************************************************************** */ + +/* + * DUART Mode Register #1 (Table 10-3) + * Register: DUART_MODE_REG_1_A + * Register: DUART_MODE_REG_1_B + */ + +#define S_DUART_BITS_PER_CHAR 0 +#define M_DUART_BITS_PER_CHAR _SB_MAKEMASK(2, S_DUART_BITS_PER_CHAR) +#define V_DUART_BITS_PER_CHAR(x) _SB_MAKEVALUE(x, S_DUART_BITS_PER_CHAR) + +#define K_DUART_BITS_PER_CHAR_RSV0 0 +#define K_DUART_BITS_PER_CHAR_RSV1 1 +#define K_DUART_BITS_PER_CHAR_7 2 +#define K_DUART_BITS_PER_CHAR_8 3 + +#define V_DUART_BITS_PER_CHAR_RSV0 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV0) +#define V_DUART_BITS_PER_CHAR_RSV1 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV1) +#define V_DUART_BITS_PER_CHAR_7 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_7) +#define V_DUART_BITS_PER_CHAR_8 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_8) + + +#define M_DUART_PARITY_TYPE_EVEN 0x00 +#define M_DUART_PARITY_TYPE_ODD _SB_MAKEMASK1(2) + +#define S_DUART_PARITY_MODE 3 +#define M_DUART_PARITY_MODE _SB_MAKEMASK(2, S_DUART_PARITY_MODE) +#define V_DUART_PARITY_MODE(x) _SB_MAKEVALUE(x, S_DUART_PARITY_MODE) + +#define K_DUART_PARITY_MODE_ADD 0 +#define K_DUART_PARITY_MODE_ADD_FIXED 1 +#define K_DUART_PARITY_MODE_NONE 2 + +#define V_DUART_PARITY_MODE_ADD V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD) +#define V_DUART_PARITY_MODE_ADD_FIXED V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD_FIXED) +#define V_DUART_PARITY_MODE_NONE V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_NONE) + +#define M_DUART_TX_IRQ_SEL_TXRDY 0 +#define M_DUART_TX_IRQ_SEL_TXEMPT _SB_MAKEMASK1(5) + +#define M_DUART_RX_IRQ_SEL_RXRDY 0 +#define M_DUART_RX_IRQ_SEL_RXFULL _SB_MAKEMASK1(6) + +#define M_DUART_RX_RTS_ENA _SB_MAKEMASK1(7) + +/* + * DUART Mode Register #2 (Table 10-4) + * Register: DUART_MODE_REG_2_A + * Register: DUART_MODE_REG_2_B + */ + +#define M_DUART_MODE_RESERVED1 _SB_MAKEMASK(3, 0) /* ignored */ + +#define M_DUART_STOP_BIT_LEN_2 _SB_MAKEMASK1(3) +#define M_DUART_STOP_BIT_LEN_1 0 + +#define M_DUART_TX_CTS_ENA _SB_MAKEMASK1(4) + + +#define M_DUART_MODE_RESERVED2 _SB_MAKEMASK1(5) /* must be zero */ + +#define S_DUART_CHAN_MODE 6 +#define M_DUART_CHAN_MODE _SB_MAKEMASK(2, S_DUART_CHAN_MODE) +#define V_DUART_CHAN_MODE(x) _SB_MAKEVALUE(x, S_DUART_CHAN_MODE) + +#define K_DUART_CHAN_MODE_NORMAL 0 +#define K_DUART_CHAN_MODE_LCL_LOOP 2 +#define K_DUART_CHAN_MODE_REM_LOOP 3 + +#define V_DUART_CHAN_MODE_NORMAL V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_NORMAL) +#define V_DUART_CHAN_MODE_LCL_LOOP V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_LCL_LOOP) +#define V_DUART_CHAN_MODE_REM_LOOP V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_REM_LOOP) + +/* + * DUART Command Register (Table 10-5) + * Register: DUART_CMD_A + * Register: DUART_CMD_B + */ + +#define M_DUART_RX_EN _SB_MAKEMASK1(0) +#define M_DUART_RX_DIS _SB_MAKEMASK1(1) +#define M_DUART_TX_EN _SB_MAKEMASK1(2) +#define M_DUART_TX_DIS _SB_MAKEMASK1(3) + +#define S_DUART_MISC_CMD 4 +#define M_DUART_MISC_CMD _SB_MAKEMASK(3, S_DUART_MISC_CMD) +#define V_DUART_MISC_CMD(x) _SB_MAKEVALUE(x, S_DUART_MISC_CMD) + +#define K_DUART_MISC_CMD_NOACTION0 0 +#define K_DUART_MISC_CMD_NOACTION1 1 +#define K_DUART_MISC_CMD_RESET_RX 2 +#define K_DUART_MISC_CMD_RESET_TX 3 +#define K_DUART_MISC_CMD_NOACTION4 4 +#define K_DUART_MISC_CMD_RESET_BREAK_INT 5 +#define K_DUART_MISC_CMD_START_BREAK 6 +#define K_DUART_MISC_CMD_STOP_BREAK 7 + +#define V_DUART_MISC_CMD_NOACTION0 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION0) +#define V_DUART_MISC_CMD_NOACTION1 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION1) +#define V_DUART_MISC_CMD_RESET_RX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_RX) +#define V_DUART_MISC_CMD_RESET_TX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_TX) +#define V_DUART_MISC_CMD_NOACTION4 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION4) +#define V_DUART_MISC_CMD_RESET_BREAK_INT V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_BREAK_INT) +#define V_DUART_MISC_CMD_START_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK) +#define V_DUART_MISC_CMD_STOP_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK) + +#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7) + +/* + * DUART Status Register (Table 10-6) + * Register: DUART_STATUS_A + * Register: DUART_STATUS_B + * READ-ONLY + */ + +#define M_DUART_RX_RDY _SB_MAKEMASK1(0) +#define M_DUART_RX_FFUL _SB_MAKEMASK1(1) +#define M_DUART_TX_RDY _SB_MAKEMASK1(2) +#define M_DUART_TX_EMT _SB_MAKEMASK1(3) +#define M_DUART_OVRUN_ERR _SB_MAKEMASK1(4) +#define M_DUART_PARITY_ERR _SB_MAKEMASK1(5) +#define M_DUART_FRM_ERR _SB_MAKEMASK1(6) +#define M_DUART_RCVD_BRK _SB_MAKEMASK1(7) + +/* + * DUART Baud Rate Register (Table 10-7) + * Register: DUART_CLK_SEL_A + * Register: DUART_CLK_SEL_B + */ + +#define M_DUART_CLK_COUNTER _SB_MAKEMASK(12, 0) +#define V_DUART_BAUD_RATE(x) (100000000/((x)*20)-1) + +/* + * DUART Data Registers (Table 10-8 and 10-9) + * Register: DUART_RX_HOLD_A + * Register: DUART_RX_HOLD_B + * Register: DUART_TX_HOLD_A + * Register: DUART_TX_HOLD_B + */ + +#define M_DUART_RX_DATA _SB_MAKEMASK(8, 0) +#define M_DUART_TX_DATA _SB_MAKEMASK(8, 0) + +/* + * DUART Input Port Register (Table 10-10) + * Register: DUART_IN_PORT + */ + +#define M_DUART_IN_PIN0_VAL _SB_MAKEMASK1(0) +#define M_DUART_IN_PIN1_VAL _SB_MAKEMASK1(1) +#define M_DUART_IN_PIN2_VAL _SB_MAKEMASK1(2) +#define M_DUART_IN_PIN3_VAL _SB_MAKEMASK1(3) +#define M_DUART_IN_PIN4_VAL _SB_MAKEMASK1(4) +#define M_DUART_IN_PIN5_VAL _SB_MAKEMASK1(5) +#define M_DUART_RIN0_PIN _SB_MAKEMASK1(6) +#define M_DUART_RIN1_PIN _SB_MAKEMASK1(7) + +/* + * DUART Input Port Change Status Register (Tables 10-11, 10-12, and 10-13) + * Register: DUART_INPORT_CHNG + */ + +#define S_DUART_IN_PIN_VAL 0 +#define M_DUART_IN_PIN_VAL _SB_MAKEMASK(4, S_DUART_IN_PIN_VAL) + +#define S_DUART_IN_PIN_CHNG 4 +#define M_DUART_IN_PIN_CHNG _SB_MAKEMASK(4, S_DUART_IN_PIN_CHNG) + + +/* + * DUART Output port control register (Table 10-14) + * Register: DUART_OPCR + */ + +#define M_DUART_OPCR_RESERVED0 _SB_MAKEMASK1(0) /* must be zero */ +#define M_DUART_OPC2_SEL _SB_MAKEMASK1(1) +#define M_DUART_OPCR_RESERVED1 _SB_MAKEMASK1(2) /* must be zero */ +#define M_DUART_OPC3_SEL _SB_MAKEMASK1(3) +#define M_DUART_OPCR_RESERVED2 _SB_MAKEMASK(4, 4) /* must be zero */ + +/* + * DUART Aux Control Register (Table 10-15) + * Register: DUART_AUX_CTRL + */ + +#define M_DUART_IP0_CHNG_ENA _SB_MAKEMASK1(0) +#define M_DUART_IP1_CHNG_ENA _SB_MAKEMASK1(1) +#define M_DUART_IP2_CHNG_ENA _SB_MAKEMASK1(2) +#define M_DUART_IP3_CHNG_ENA _SB_MAKEMASK1(3) +#define M_DUART_ACR_RESERVED _SB_MAKEMASK(4, 4) + +#define M_DUART_CTS_CHNG_ENA _SB_MAKEMASK1(0) +#define M_DUART_CIN_CHNG_ENA _SB_MAKEMASK1(2) + +/* + * DUART Interrupt Status Register (Table 10-16) + * Register: DUART_ISR + */ + +#define M_DUART_ISR_TX_A _SB_MAKEMASK1(0) + +#define S_DUART_ISR_RX_A 1 +#define M_DUART_ISR_RX_A _SB_MAKEMASK1(S_DUART_ISR_RX_A) +#define V_DUART_ISR_RX_A(x) _SB_MAKEVALUE(x, S_DUART_ISR_RX_A) +#define G_DUART_ISR_RX_A(x) _SB_GETVALUE(x, S_DUART_ISR_RX_A, M_DUART_ISR_RX_A) + +#define M_DUART_ISR_BRK_A _SB_MAKEMASK1(2) +#define M_DUART_ISR_IN_A _SB_MAKEMASK1(3) +#define M_DUART_ISR_ALL_A _SB_MAKEMASK(4, 0) + +#define M_DUART_ISR_TX_B _SB_MAKEMASK1(4) +#define M_DUART_ISR_RX_B _SB_MAKEMASK1(5) +#define M_DUART_ISR_BRK_B _SB_MAKEMASK1(6) +#define M_DUART_ISR_IN_B _SB_MAKEMASK1(7) +#define M_DUART_ISR_ALL_B _SB_MAKEMASK(4, 4) + +/* + * DUART Channel A Interrupt Status Register (Table 10-17) + * DUART Channel B Interrupt Status Register (Table 10-18) + * Register: DUART_ISR_A + * Register: DUART_ISR_B + */ + +#define M_DUART_ISR_TX _SB_MAKEMASK1(0) +#define M_DUART_ISR_RX _SB_MAKEMASK1(1) +#define M_DUART_ISR_BRK _SB_MAKEMASK1(2) +#define M_DUART_ISR_IN _SB_MAKEMASK1(3) +#define M_DUART_ISR_ALL _SB_MAKEMASK(4, 0) +#define M_DUART_ISR_RESERVED _SB_MAKEMASK(4, 4) + +/* + * DUART Interrupt Mask Register (Table 10-19) + * Register: DUART_IMR + */ + +#define M_DUART_IMR_TX_A _SB_MAKEMASK1(0) +#define M_DUART_IMR_RX_A _SB_MAKEMASK1(1) +#define M_DUART_IMR_BRK_A _SB_MAKEMASK1(2) +#define M_DUART_IMR_IN_A _SB_MAKEMASK1(3) +#define M_DUART_IMR_ALL_A _SB_MAKEMASK(4, 0) + +#define M_DUART_IMR_TX_B _SB_MAKEMASK1(4) +#define M_DUART_IMR_RX_B _SB_MAKEMASK1(5) +#define M_DUART_IMR_BRK_B _SB_MAKEMASK1(6) +#define M_DUART_IMR_IN_B _SB_MAKEMASK1(7) +#define M_DUART_IMR_ALL_B _SB_MAKEMASK(4, 4) + +/* + * DUART Channel A Interrupt Mask Register (Table 10-20) + * DUART Channel B Interrupt Mask Register (Table 10-21) + * Register: DUART_IMR_A + * Register: DUART_IMR_B + */ + +#define M_DUART_IMR_TX _SB_MAKEMASK1(0) +#define M_DUART_IMR_RX _SB_MAKEMASK1(1) +#define M_DUART_IMR_BRK _SB_MAKEMASK1(2) +#define M_DUART_IMR_IN _SB_MAKEMASK1(3) +#define M_DUART_IMR_ALL _SB_MAKEMASK(4, 0) +#define M_DUART_IMR_RESERVED _SB_MAKEMASK(4, 4) + + +/* + * DUART Output Port Set Register (Table 10-22) + * Register: DUART_SET_OPR + */ + +#define M_DUART_SET_OPR0 _SB_MAKEMASK1(0) +#define M_DUART_SET_OPR1 _SB_MAKEMASK1(1) +#define M_DUART_SET_OPR2 _SB_MAKEMASK1(2) +#define M_DUART_SET_OPR3 _SB_MAKEMASK1(3) +#define M_DUART_OPSR_RESERVED _SB_MAKEMASK(4, 4) + +/* + * DUART Output Port Clear Register (Table 10-23) + * Register: DUART_CLEAR_OPR + */ + +#define M_DUART_CLR_OPR0 _SB_MAKEMASK1(0) +#define M_DUART_CLR_OPR1 _SB_MAKEMASK1(1) +#define M_DUART_CLR_OPR2 _SB_MAKEMASK1(2) +#define M_DUART_CLR_OPR3 _SB_MAKEMASK1(3) +#define M_DUART_OPCR_RESERVED _SB_MAKEMASK(4, 4) + +/* + * DUART Output Port RTS Register (Table 10-24) + * Register: DUART_OUT_PORT + */ + +#define M_DUART_OUT_PIN_SET0 _SB_MAKEMASK1(0) +#define M_DUART_OUT_PIN_SET1 _SB_MAKEMASK1(1) +#define M_DUART_OUT_PIN_CLR0 _SB_MAKEMASK1(2) +#define M_DUART_OUT_PIN_CLR1 _SB_MAKEMASK1(3) +#define M_DUART_OPRR_RESERVED _SB_MAKEMASK(4, 4) + +#define M_DUART_OUT_PIN_SET(chan) \ + (chan == 0 ? M_DUART_OUT_PIN_SET0 : M_DUART_OUT_PIN_SET1) +#define M_DUART_OUT_PIN_CLR(chan) \ + (chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1) + +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) +/* + * Full Interrupt Control Register + */ + +#define S_DUART_SIG_FULL _SB_MAKE64(0) +#define M_DUART_SIG_FULL _SB_MAKEMASK(4, S_DUART_SIG_FULL) +#define V_DUART_SIG_FULL(x) _SB_MAKEVALUE(x, S_DUART_SIG_FULL) +#define G_DUART_SIG_FULL(x) _SB_GETVALUE(x, S_DUART_SIG_FULL, M_DUART_SIG_FULL) + +#define S_DUART_INT_TIME _SB_MAKE64(4) +#define M_DUART_INT_TIME _SB_MAKEMASK(4, S_DUART_INT_TIME) +#define V_DUART_INT_TIME(x) _SB_MAKEVALUE(x, S_DUART_INT_TIME) +#define G_DUART_INT_TIME(x) _SB_GETVALUE(x, S_DUART_INT_TIME, M_DUART_INT_TIME) +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ + + +/* ********************************************************************** */ + + +#endif diff --git a/arch/mips/include/asm/sibyte/sentosa.h b/arch/mips/include/asm/sibyte/sentosa.h new file mode 100644 index 000000000000..64c47874f32d --- /dev/null +++ b/arch/mips/include/asm/sibyte/sentosa.h @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2000, 2001 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __ASM_SIBYTE_SENTOSA_H +#define __ASM_SIBYTE_SENTOSA_H + +#include +#include + +#ifdef CONFIG_SIBYTE_SENTOSA +#define SIBYTE_BOARD_NAME "BCM91250E (Sentosa)" +#endif +#ifdef CONFIG_SIBYTE_RHONE +#define SIBYTE_BOARD_NAME "BCM91125E (Rhone)" +#endif + +/* Generic bus chip selects */ +#ifdef CONFIG_SIBYTE_RHONE +#define LEDS_CS 6 +#define LEDS_PHYS 0x1d0a0000 +#endif + +/* GPIOs */ +#define K_GPIO_DBG_LED 0 + +#endif /* __ASM_SIBYTE_SENTOSA_H */ diff --git a/arch/mips/include/asm/sibyte/swarm.h b/arch/mips/include/asm/sibyte/swarm.h new file mode 100644 index 000000000000..114d9d29ca9d --- /dev/null +++ b/arch/mips/include/asm/sibyte/swarm.h @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __ASM_SIBYTE_SWARM_H +#define __ASM_SIBYTE_SWARM_H + +#include +#include + +#ifdef CONFIG_SIBYTE_SWARM +#define SIBYTE_BOARD_NAME "BCM91250A (SWARM)" +#define SIBYTE_HAVE_PCMCIA 1 +#define SIBYTE_HAVE_IDE 1 +#endif +#ifdef CONFIG_SIBYTE_LITTLESUR +#define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)" +#define SIBYTE_HAVE_PCMCIA 0 +#define SIBYTE_HAVE_IDE 1 +#define SIBYTE_DEFAULT_CONSOLE "cfe0" +#endif +#ifdef CONFIG_SIBYTE_CRHONE +#define SIBYTE_BOARD_NAME "BCM91125C (CRhone)" +#define SIBYTE_HAVE_PCMCIA 0 +#define SIBYTE_HAVE_IDE 0 +#endif +#ifdef CONFIG_SIBYTE_CRHINE +#define SIBYTE_BOARD_NAME "BCM91120C (CRhine)" +#define SIBYTE_HAVE_PCMCIA 0 +#define SIBYTE_HAVE_IDE 0 +#endif + +/* Generic bus chip selects */ +#define LEDS_CS 3 +#define LEDS_PHYS 0x100a0000 + +#ifdef SIBYTE_HAVE_IDE +#define IDE_CS 4 +#define IDE_PHYS 0x100b0000 +#define K_GPIO_GB_IDE 4 +#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) +#endif + +#ifdef SIBYTE_HAVE_PCMCIA +#define PCMCIA_CS 6 +#define PCMCIA_PHYS 0x11000000 +#define K_GPIO_PC_READY 9 +#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY) +#endif + +#endif /* __ASM_SIBYTE_SWARM_H */ diff --git a/arch/mips/include/asm/sigcontext.h b/arch/mips/include/asm/sigcontext.h new file mode 100644 index 000000000000..9ce0607d7a4e --- /dev/null +++ b/arch/mips/include/asm/sigcontext.h @@ -0,0 +1,100 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1999 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_SIGCONTEXT_H +#define _ASM_SIGCONTEXT_H + +#include + +#if _MIPS_SIM == _MIPS_SIM_ABI32 + +/* + * Keep this struct definition in sync with the sigcontext fragment + * in arch/mips/tools/offset.c + */ +struct sigcontext { + unsigned int sc_regmask; /* Unused */ + unsigned int sc_status; /* Unused */ + unsigned long long sc_pc; + unsigned long long sc_regs[32]; + unsigned long long sc_fpregs[32]; + unsigned int sc_acx; /* Was sc_ownedfp */ + unsigned int sc_fpc_csr; + unsigned int sc_fpc_eir; /* Unused */ + unsigned int sc_used_math; + unsigned int sc_dsp; /* dsp status, was sc_ssflags */ + unsigned long long sc_mdhi; + unsigned long long sc_mdlo; + unsigned long sc_hi1; /* Was sc_cause */ + unsigned long sc_lo1; /* Was sc_badvaddr */ + unsigned long sc_hi2; /* Was sc_sigset[4] */ + unsigned long sc_lo2; + unsigned long sc_hi3; + unsigned long sc_lo3; +}; + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 + +#include +/* + * Keep this struct definition in sync with the sigcontext fragment + * in arch/mips/tools/offset.c + * + * Warning: this structure illdefined with sc_badvaddr being just an unsigned + * int so it was changed to unsigned long in 2.6.0-test1. This may break + * binary compatibility - no prisoners. + * DSP ASE in 2.6.12-rc4. Turn sc_mdhi and sc_mdlo into an array of four + * entries, add sc_dsp and sc_reserved for padding. No prisoners. + */ +struct sigcontext { + __u64 sc_regs[32]; + __u64 sc_fpregs[32]; + __u64 sc_mdhi; + __u64 sc_hi1; + __u64 sc_hi2; + __u64 sc_hi3; + __u64 sc_mdlo; + __u64 sc_lo1; + __u64 sc_lo2; + __u64 sc_lo3; + __u64 sc_pc; + __u32 sc_fpc_csr; + __u32 sc_used_math; + __u32 sc_dsp; + __u32 sc_reserved; +}; + +#ifdef __KERNEL__ + +struct sigcontext32 { + __u32 sc_regmask; /* Unused */ + __u32 sc_status; /* Unused */ + __u64 sc_pc; + __u64 sc_regs[32]; + __u64 sc_fpregs[32]; + __u32 sc_acx; /* Only MIPS32; was sc_ownedfp */ + __u32 sc_fpc_csr; + __u32 sc_fpc_eir; /* Unused */ + __u32 sc_used_math; + __u32 sc_dsp; /* dsp status, was sc_ssflags */ + __u64 sc_mdhi; + __u64 sc_mdlo; + __u32 sc_hi1; /* Was sc_cause */ + __u32 sc_lo1; /* Was sc_badvaddr */ + __u32 sc_hi2; /* Was sc_sigset[4] */ + __u32 sc_lo2; + __u32 sc_hi3; + __u32 sc_lo3; +}; +#endif /* __KERNEL__ */ + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */ + +#endif /* _ASM_SIGCONTEXT_H */ diff --git a/arch/mips/include/asm/siginfo.h b/arch/mips/include/asm/siginfo.h new file mode 100644 index 000000000000..96e28f18dad1 --- /dev/null +++ b/arch/mips/include/asm/siginfo.h @@ -0,0 +1,130 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 1999, 2001, 2003 Ralf Baechle + * Copyright (C) 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_SIGINFO_H +#define _ASM_SIGINFO_H + + +#define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(long) + 2*sizeof(int)) +#undef __ARCH_SI_TRAPNO /* exception code needs to fill this ... */ + +#define HAVE_ARCH_SIGINFO_T + +/* + * We duplicate the generic versions - is just borked + * by design ... + */ +#define HAVE_ARCH_COPY_SIGINFO +struct siginfo; + +/* + * Careful to keep union _sifields from shifting ... + */ +#ifdef CONFIG_32BIT +#define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int)) +#endif +#ifdef CONFIG_64BIT +#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +#endif + +#include + +typedef struct siginfo { + int si_signo; + int si_code; + int si_errno; + int __pad0[SI_MAX_SIZE / sizeof(int) - SI_PAD_SIZE - 3]; + + union { + int _pad[SI_PAD_SIZE]; + + /* kill() */ + struct { + pid_t _pid; /* sender's pid */ + __ARCH_SI_UID_T _uid; /* sender's uid */ + } _kill; + + /* POSIX.1b timers */ + struct { + timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)]; + sigval_t _sigval; /* same as below */ + int _sys_private; /* not to be passed to user */ + } _timer; + + /* POSIX.1b signals */ + struct { + pid_t _pid; /* sender's pid */ + __ARCH_SI_UID_T _uid; /* sender's uid */ + sigval_t _sigval; + } _rt; + + /* SIGCHLD */ + struct { + pid_t _pid; /* which child */ + __ARCH_SI_UID_T _uid; /* sender's uid */ + int _status; /* exit code */ + clock_t _utime; + clock_t _stime; + } _sigchld; + + /* IRIX SIGCHLD */ + struct { + pid_t _pid; /* which child */ + clock_t _utime; + int _status; /* exit code */ + clock_t _stime; + } _irix_sigchld; + + /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ + struct { + void __user *_addr; /* faulting insn/memory ref. */ +#ifdef __ARCH_SI_TRAPNO + int _trapno; /* TRAP # which caused the signal */ +#endif + } _sigfault; + + /* SIGPOLL, SIGXFSZ (To do ...) */ + struct { + __ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */ + int _fd; + } _sigpoll; + } _sifields; +} siginfo_t; + +/* + * si_code values + * Again these have been choosen to be IRIX compatible. + */ +#undef SI_ASYNCIO +#undef SI_TIMER +#undef SI_MESGQ +#define SI_ASYNCIO -2 /* sent by AIO completion */ +#define SI_TIMER __SI_CODE(__SI_TIMER, -3) /* sent by timer expiration */ +#define SI_MESGQ __SI_CODE(__SI_MESGQ, -4) /* sent by real time mesq state change */ + +#ifdef __KERNEL__ + +/* + * Duplicated here because of braindamage ... + */ +#include + +static inline void copy_siginfo(struct siginfo *to, struct siginfo *from) +{ + if (from->si_code < 0) + memcpy(to, from, sizeof(*to)); + else + /* _sigchld is currently the largest know union member */ + memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld)); +} + +#endif + +#endif /* _ASM_SIGINFO_H */ diff --git a/arch/mips/include/asm/signal.h b/arch/mips/include/asm/signal.h new file mode 100644 index 000000000000..bee5153aca48 --- /dev/null +++ b/arch/mips/include/asm/signal.h @@ -0,0 +1,139 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 97, 98, 99, 2003 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_SIGNAL_H +#define _ASM_SIGNAL_H + +#include + +#define _NSIG 128 +#define _NSIG_BPW (sizeof(unsigned long) * 8) +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +#define SIGHUP 1 /* Hangup (POSIX). */ +#define SIGINT 2 /* Interrupt (ANSI). */ +#define SIGQUIT 3 /* Quit (POSIX). */ +#define SIGILL 4 /* Illegal instruction (ANSI). */ +#define SIGTRAP 5 /* Trace trap (POSIX). */ +#define SIGIOT 6 /* IOT trap (4.2 BSD). */ +#define SIGABRT SIGIOT /* Abort (ANSI). */ +#define SIGEMT 7 +#define SIGFPE 8 /* Floating-point exception (ANSI). */ +#define SIGKILL 9 /* Kill, unblockable (POSIX). */ +#define SIGBUS 10 /* BUS error (4.2 BSD). */ +#define SIGSEGV 11 /* Segmentation violation (ANSI). */ +#define SIGSYS 12 +#define SIGPIPE 13 /* Broken pipe (POSIX). */ +#define SIGALRM 14 /* Alarm clock (POSIX). */ +#define SIGTERM 15 /* Termination (ANSI). */ +#define SIGUSR1 16 /* User-defined signal 1 (POSIX). */ +#define SIGUSR2 17 /* User-defined signal 2 (POSIX). */ +#define SIGCHLD 18 /* Child status has changed (POSIX). */ +#define SIGCLD SIGCHLD /* Same as SIGCHLD (System V). */ +#define SIGPWR 19 /* Power failure restart (System V). */ +#define SIGWINCH 20 /* Window size change (4.3 BSD, Sun). */ +#define SIGURG 21 /* Urgent condition on socket (4.2 BSD). */ +#define SIGIO 22 /* I/O now possible (4.2 BSD). */ +#define SIGPOLL SIGIO /* Pollable event occurred (System V). */ +#define SIGSTOP 23 /* Stop, unblockable (POSIX). */ +#define SIGTSTP 24 /* Keyboard stop (POSIX). */ +#define SIGCONT 25 /* Continue (POSIX). */ +#define SIGTTIN 26 /* Background read from tty (POSIX). */ +#define SIGTTOU 27 /* Background write to tty (POSIX). */ +#define SIGVTALRM 28 /* Virtual alarm clock (4.2 BSD). */ +#define SIGPROF 29 /* Profiling alarm clock (4.2 BSD). */ +#define SIGXCPU 30 /* CPU limit exceeded (4.2 BSD). */ +#define SIGXFSZ 31 /* File size limit exceeded (4.2 BSD). */ + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_ONSTACK 0x08000000 +#define SA_RESETHAND 0x80000000 +#define SA_RESTART 0x10000000 +#define SA_SIGINFO 0x00000008 +#define SA_NODEFER 0x40000000 +#define SA_NOCLDWAIT 0x00010000 +#define SA_NOCLDSTOP 0x00000001 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 /* Only for o32 */ + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#ifdef __KERNEL__ + +#ifdef CONFIG_TRAD_SIGNALS +#define sig_uses_siginfo(ka) ((ka)->sa.sa_flags & SA_SIGINFO) +#else +#define sig_uses_siginfo(ka) (1) +#endif + +#endif /* __KERNEL__ */ + +#define SIG_BLOCK 1 /* for blocking signals */ +#define SIG_UNBLOCK 2 /* for unblocking signals */ +#define SIG_SETMASK 3 /* for setting the signal mask */ + +#include + +struct sigaction { + unsigned int sa_flags; + __sighandler_t sa_handler; + sigset_t sa_mask; +}; + +struct k_sigaction { + struct sigaction sa; +}; + +/* IRIX compatible stack_t */ +typedef struct sigaltstack { + void __user *ss_sp; + size_t ss_size; + int ss_flags; +} stack_t; + +#ifdef __KERNEL__ +#include +#include + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_SIGNAL_H */ diff --git a/arch/mips/include/asm/sim.h b/arch/mips/include/asm/sim.h new file mode 100644 index 000000000000..0cd719fabb51 --- /dev/null +++ b/arch/mips/include/asm/sim.h @@ -0,0 +1,82 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999, 2000, 2003 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_SIM_H +#define _ASM_SIM_H + + +#include + +#define __str2(x) #x +#define __str(x) __str2(x) + +#ifdef CONFIG_32BIT + +#define save_static_function(symbol) \ +__asm__( \ + ".text\n\t" \ + ".globl\t" #symbol "\n\t" \ + ".align\t2\n\t" \ + ".type\t" #symbol ", @function\n\t" \ + ".ent\t" #symbol ", 0\n" \ + #symbol":\n\t" \ + ".frame\t$29, 0, $31\n\t" \ + "sw\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t" \ + "sw\t$17,"__str(PT_R17)"($29)\n\t" \ + "sw\t$18,"__str(PT_R18)"($29)\n\t" \ + "sw\t$19,"__str(PT_R19)"($29)\n\t" \ + "sw\t$20,"__str(PT_R20)"($29)\n\t" \ + "sw\t$21,"__str(PT_R21)"($29)\n\t" \ + "sw\t$22,"__str(PT_R22)"($29)\n\t" \ + "sw\t$23,"__str(PT_R23)"($29)\n\t" \ + "sw\t$30,"__str(PT_R30)"($29)\n\t" \ + "j\t_" #symbol "\n\t" \ + ".end\t" #symbol "\n\t" \ + ".size\t" #symbol",. - " #symbol) + +#define nabi_no_regargs + +#endif /* CONFIG_32BIT */ + +#ifdef CONFIG_64BIT + +#define save_static_function(symbol) \ +__asm__( \ + ".text\n\t" \ + ".globl\t" #symbol "\n\t" \ + ".align\t2\n\t" \ + ".type\t" #symbol ", @function\n\t" \ + ".ent\t" #symbol ", 0\n" \ + #symbol":\n\t" \ + ".frame\t$29, 0, $31\n\t" \ + "sd\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t" \ + "sd\t$17,"__str(PT_R17)"($29)\n\t" \ + "sd\t$18,"__str(PT_R18)"($29)\n\t" \ + "sd\t$19,"__str(PT_R19)"($29)\n\t" \ + "sd\t$20,"__str(PT_R20)"($29)\n\t" \ + "sd\t$21,"__str(PT_R21)"($29)\n\t" \ + "sd\t$22,"__str(PT_R22)"($29)\n\t" \ + "sd\t$23,"__str(PT_R23)"($29)\n\t" \ + "sd\t$30,"__str(PT_R30)"($29)\n\t" \ + "j\t_" #symbol "\n\t" \ + ".end\t" #symbol "\n\t" \ + ".size\t" #symbol",. - " #symbol) + +#define nabi_no_regargs \ + unsigned long __dummy0, \ + unsigned long __dummy1, \ + unsigned long __dummy2, \ + unsigned long __dummy3, \ + unsigned long __dummy4, \ + unsigned long __dummy5, \ + unsigned long __dummy6, \ + unsigned long __dummy7, + +#endif /* CONFIG_64BIT */ + +#endif /* _ASM_SIM_H */ diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h new file mode 100644 index 000000000000..43c207e72a63 --- /dev/null +++ b/arch/mips/include/asm/smp-ops.h @@ -0,0 +1,57 @@ +/* + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com) + * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc. + * Copyright (C) 2000, 2001, 2002 Ralf Baechle + * Copyright (C) 2000, 2001 Broadcom Corporation + */ +#ifndef __ASM_SMP_OPS_H +#define __ASM_SMP_OPS_H + +#ifdef CONFIG_SMP + +#include + +struct plat_smp_ops { + void (*send_ipi_single)(int cpu, unsigned int action); + void (*send_ipi_mask)(cpumask_t mask, unsigned int action); + void (*init_secondary)(void); + void (*smp_finish)(void); + void (*cpus_done)(void); + void (*boot_secondary)(int cpu, struct task_struct *idle); + void (*smp_setup)(void); + void (*prepare_cpus)(unsigned int max_cpus); +}; + +extern void register_smp_ops(struct plat_smp_ops *ops); + +static inline void plat_smp_setup(void) +{ + extern struct plat_smp_ops *mp_ops; /* private */ + + mp_ops->smp_setup(); +} + +#else /* !CONFIG_SMP */ + +struct plat_smp_ops; + +static inline void plat_smp_setup(void) +{ + /* UP, nothing to do ... */ +} + +static inline void register_smp_ops(struct plat_smp_ops *ops) +{ +} + +#endif /* !CONFIG_SMP */ + +extern struct plat_smp_ops up_smp_ops; +extern struct plat_smp_ops cmp_smp_ops; +extern struct plat_smp_ops vsmp_smp_ops; + +#endif /* __ASM_SMP_OPS_H */ diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h new file mode 100644 index 000000000000..0ff5b523ea77 --- /dev/null +++ b/arch/mips/include/asm/smp.h @@ -0,0 +1,63 @@ +/* + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com) + * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc. + * Copyright (C) 2000, 2001, 2002 Ralf Baechle + * Copyright (C) 2000, 2001 Broadcom Corporation + */ +#ifndef __ASM_SMP_H +#define __ASM_SMP_H + +#include +#include +#include +#include + +#include +#include + +extern int smp_num_siblings; +extern cpumask_t cpu_sibling_map[]; + +#define raw_smp_processor_id() (current_thread_info()->cpu) + +/* Map from cpu id to sequential logical cpu number. This will only + not be idempotent when cpus failed to come on-line. */ +extern int __cpu_number_map[NR_CPUS]; +#define cpu_number_map(cpu) __cpu_number_map[cpu] + +/* The reverse map from sequential logical cpu number to cpu id. */ +extern int __cpu_logical_map[NR_CPUS]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] + +#define NO_PROC_ID (-1) + +#define SMP_RESCHEDULE_YOURSELF 0x1 /* XXX braindead */ +#define SMP_CALL_FUNCTION 0x2 + +extern cpumask_t phys_cpu_present_map; +#define cpu_possible_map phys_cpu_present_map + +extern void asmlinkage smp_bootstrap(void); + +/* + * this function sends a 'reschedule' IPI to another CPU. + * it goes straight through and wastes no time serializing + * anything. Worst case is that we lose a reschedule ... + */ +static inline void smp_send_reschedule(int cpu) +{ + extern struct plat_smp_ops *mp_ops; /* private */ + + mp_ops->send_ipi_single(cpu, SMP_RESCHEDULE_YOURSELF); +} + +extern asmlinkage void smp_call_function_interrupt(void); + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +#endif /* __ASM_SMP_H */ diff --git a/arch/mips/include/asm/smtc.h b/arch/mips/include/asm/smtc.h new file mode 100644 index 000000000000..ea60bf08dcb0 --- /dev/null +++ b/arch/mips/include/asm/smtc.h @@ -0,0 +1,71 @@ +#ifndef _ASM_SMTC_MT_H +#define _ASM_SMTC_MT_H + +/* + * Definitions for SMTC multitasking on MIPS MT cores + */ + +#include +#include + +/* + * System-wide SMTC status information + */ + +extern unsigned int smtc_status; + +#define SMTC_TLB_SHARED 0x00000001 +#define SMTC_MTC_ACTIVE 0x00000002 + +/* + * TLB/ASID Management information + */ + +#define MAX_SMTC_TLBS 2 +#define MAX_SMTC_ASIDS 256 +#if NR_CPUS <= 8 +typedef char asiduse; +#else +#if NR_CPUS <= 16 +typedef short asiduse; +#else +typedef long asiduse; +#endif +#endif + +extern asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; + +struct mm_struct; +struct task_struct; + +void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu); +void self_ipi(struct smtc_ipi *); +void smtc_flush_tlb_asid(unsigned long asid); +extern int smtc_build_cpu_map(int startslot); +extern void smtc_prepare_cpus(int cpus); +extern void smtc_smp_finish(void); +extern void smtc_boot_secondary(int cpu, struct task_struct *t); +extern void smtc_cpus_done(void); + + +/* + * Sharing the TLB between multiple VPEs means that the + * "random" index selection function is not allowed to + * select the current value of the Index register. To + * avoid additional TLB pressure, the Index registers + * are "parked" with an non-Valid value. + */ + +#define PARKED_INDEX ((unsigned int)0x80000000) + +/* + * Define low-level interrupt mask for IPIs, if necessary. + * By default, use SW interrupt 1, which requires no external + * hardware support, but which works only for single-core + * MIPS MT systems. + */ +#ifndef MIPS_CPU_IPI_IRQ +#define MIPS_CPU_IPI_IRQ 1 +#endif + +#endif /* _ASM_SMTC_MT_H */ diff --git a/arch/mips/include/asm/smtc_ipi.h b/arch/mips/include/asm/smtc_ipi.h new file mode 100644 index 000000000000..8ce517574340 --- /dev/null +++ b/arch/mips/include/asm/smtc_ipi.h @@ -0,0 +1,128 @@ +/* + * Definitions used in MIPS MT SMTC "Interprocessor Interrupt" code. + */ +#ifndef __ASM_SMTC_IPI_H +#define __ASM_SMTC_IPI_H + +#include + +//#define SMTC_IPI_DEBUG + +#ifdef SMTC_IPI_DEBUG +#include +#include +#endif /* SMTC_IPI_DEBUG */ + +/* + * An IPI "message" + */ + +struct smtc_ipi { + struct smtc_ipi *flink; + int type; + void *arg; + int dest; +#ifdef SMTC_IPI_DEBUG + int sender; + long stamp; +#endif /* SMTC_IPI_DEBUG */ +}; + +/* + * Defined IPI Types + */ + +#define LINUX_SMP_IPI 1 +#define SMTC_CLOCK_TICK 2 +#define IRQ_AFFINITY_IPI 3 + +/* + * A queue of IPI messages + */ + +struct smtc_ipi_q { + struct smtc_ipi *head; + spinlock_t lock; + struct smtc_ipi *tail; + int depth; +}; + +static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p) +{ + unsigned long flags; + + spin_lock_irqsave(&q->lock, flags); + if (q->head == NULL) + q->head = q->tail = p; + else + q->tail->flink = p; + p->flink = NULL; + q->tail = p; + q->depth++; +#ifdef SMTC_IPI_DEBUG + p->sender = read_c0_tcbind(); + p->stamp = read_c0_count(); +#endif /* SMTC_IPI_DEBUG */ + spin_unlock_irqrestore(&q->lock, flags); +} + +static inline struct smtc_ipi *__smtc_ipi_dq(struct smtc_ipi_q *q) +{ + struct smtc_ipi *p; + + if (q->head == NULL) + p = NULL; + else { + p = q->head; + q->head = q->head->flink; + q->depth--; + /* Arguably unnecessary, but leaves queue cleaner */ + if (q->head == NULL) + q->tail = NULL; + } + + return p; +} + +static inline struct smtc_ipi *smtc_ipi_dq(struct smtc_ipi_q *q) +{ + unsigned long flags; + struct smtc_ipi *p; + + spin_lock_irqsave(&q->lock, flags); + p = __smtc_ipi_dq(q); + spin_unlock_irqrestore(&q->lock, flags); + + return p; +} + +static inline void smtc_ipi_req(struct smtc_ipi_q *q, struct smtc_ipi *p) +{ + unsigned long flags; + + spin_lock_irqsave(&q->lock, flags); + if (q->head == NULL) { + q->head = q->tail = p; + p->flink = NULL; + } else { + p->flink = q->head; + q->head = p; + } + q->depth++; + spin_unlock_irqrestore(&q->lock, flags); +} + +static inline int smtc_ipi_qdepth(struct smtc_ipi_q *q) +{ + unsigned long flags; + int retval; + + spin_lock_irqsave(&q->lock, flags); + retval = q->depth; + spin_unlock_irqrestore(&q->lock, flags); + return retval; +} + +extern void smtc_send_ipi(int cpu, int type, unsigned int action); + +#endif /* __ASM_SMTC_IPI_H */ diff --git a/arch/mips/include/asm/smtc_proc.h b/arch/mips/include/asm/smtc_proc.h new file mode 100644 index 000000000000..25da651f1f5f --- /dev/null +++ b/arch/mips/include/asm/smtc_proc.h @@ -0,0 +1,23 @@ +/* + * Definitions for SMTC /proc entries + * Copyright(C) 2005 MIPS Technologies Inc. + */ +#ifndef __ASM_SMTC_PROC_H +#define __ASM_SMTC_PROC_H + +/* + * per-"CPU" statistics + */ + +struct smtc_cpu_proc { + unsigned long timerints; + unsigned long selfipis; +}; + +extern struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS]; + +/* Count of number of recoveries of "stolen" FPU access rights on 34K */ + +extern atomic_t smtc_fpu_recoveries; + +#endif /* __ASM_SMTC_PROC_H */ diff --git a/arch/mips/include/asm/smvp.h b/arch/mips/include/asm/smvp.h new file mode 100644 index 000000000000..0d0e80a39e8a --- /dev/null +++ b/arch/mips/include/asm/smvp.h @@ -0,0 +1,19 @@ +#ifndef _ASM_SMVP_H +#define _ASM_SMVP_H + +/* + * Definitions for SMVP multitasking on MIPS MT cores + */ +struct task_struct; + +extern void smvp_smp_setup(void); +extern void smvp_smp_finish(void); +extern void smvp_boot_secondary(int cpu, struct task_struct *t); +extern void smvp_init_secondary(void); +extern void smvp_smp_finish(void); +extern void smvp_cpus_done(void); +extern void smvp_prepare_cpus(unsigned int max_cpus); + +/* This is platform specific */ +extern void smvp_send_ipi(int cpu, unsigned int action); +#endif /* _ASM_SMVP_H */ diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h new file mode 100644 index 000000000000..fec9bdd34913 --- /dev/null +++ b/arch/mips/include/asm/sn/addrs.h @@ -0,0 +1,430 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 1999, 2000 by Ralf Baechle + */ +#ifndef _ASM_SN_ADDRS_H +#define _ASM_SN_ADDRS_H + + +#ifndef __ASSEMBLY__ +#include +#endif /* !__ASSEMBLY__ */ + +#include +#include + +#if defined(CONFIG_SGI_IP27) +#include +#elif defined(CONFIG_SGI_IP35) +#include +#endif + + +#ifndef __ASSEMBLY__ + +#define PS_UINT_CAST (unsigned long) +#define UINT64_CAST (unsigned long) + +#define HUBREG_CAST (volatile hubreg_t *) + +#else /* __ASSEMBLY__ */ + +#define PS_UINT_CAST +#define UINT64_CAST +#define HUBREG_CAST + +#endif /* __ASSEMBLY__ */ + + +#define NASID_GET_META(_n) ((_n) >> NASID_LOCAL_BITS) +#ifdef CONFIG_SGI_IP27 +#define NASID_GET_LOCAL(_n) ((_n) & 0xf) +#endif +#define NASID_MAKE(_m, _l) (((_m) << NASID_LOCAL_BITS) | (_l)) + +#define NODE_ADDRSPACE_MASK (NODE_ADDRSPACE_SIZE - 1) +#define TO_NODE_ADDRSPACE(_pa) (UINT64_CAST (_pa) & NODE_ADDRSPACE_MASK) + +#define CHANGE_ADDR_NASID(_pa, _nasid) \ + ((UINT64_CAST(_pa) & ~NASID_MASK) | \ + (UINT64_CAST(_nasid) << NASID_SHFT)) + + +/* + * The following macros are used to index to the beginning of a specific + * node's address space. + */ + +#define NODE_OFFSET(_n) (UINT64_CAST (_n) << NODE_SIZE_BITS) + +#define NODE_CAC_BASE(_n) (CAC_BASE + NODE_OFFSET(_n)) +#define NODE_HSPEC_BASE(_n) (HSPEC_BASE + NODE_OFFSET(_n)) +#define NODE_IO_BASE(_n) (IO_BASE + NODE_OFFSET(_n)) +#define NODE_MSPEC_BASE(_n) (MSPEC_BASE + NODE_OFFSET(_n)) +#define NODE_UNCAC_BASE(_n) (UNCAC_BASE + NODE_OFFSET(_n)) + +#define TO_NODE(_n, _x) (NODE_OFFSET(_n) | ((_x) )) +#define TO_NODE_CAC(_n, _x) (NODE_CAC_BASE(_n) | ((_x) & TO_PHYS_MASK)) +#define TO_NODE_UNCAC(_n, _x) (NODE_UNCAC_BASE(_n) | ((_x) & TO_PHYS_MASK)) +#define TO_NODE_MSPEC(_n, _x) (NODE_MSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK)) +#define TO_NODE_HSPEC(_n, _x) (NODE_HSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK)) + + +#define RAW_NODE_SWIN_BASE(nasid, widget) \ + (NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS)) + +#define WIDGETID_GET(addr) ((unsigned char)((addr >> SWIN_SIZE_BITS) & 0xff)) + +/* + * The following definitions pertain to the IO special address + * space. They define the location of the big and little windows + * of any given node. + */ + +#define SWIN_SIZE_BITS 24 +#define SWIN_SIZE (UINT64_CAST 1 << 24) +#define SWIN_SIZEMASK (SWIN_SIZE - 1) +#define SWIN_WIDGET_MASK 0xF + +/* + * Convert smallwindow address to xtalk address. + * + * 'addr' can be physical or virtual address, but will be converted + * to Xtalk address in the range 0 -> SWINZ_SIZEMASK + */ +#define SWIN_WIDGETADDR(addr) ((addr) & SWIN_SIZEMASK) +#define SWIN_WIDGETNUM(addr) (((addr) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK) +/* + * Verify if addr belongs to small window address on node with "nasid" + * + * + * NOTE: "addr" is expected to be XKPHYS address, and NOT physical + * address + * + * + */ +#define NODE_SWIN_ADDR(nasid, addr) \ + (((addr) >= NODE_SWIN_BASE(nasid, 0)) && \ + ((addr) < (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\ + )) + +/* + * The following define the major position-independent aliases used + * in SN. + * UALIAS -- 256MB in size, reads in the UALIAS result in + * uncached references to the memory of the reader's node. + * CPU_UALIAS -- 128kb in size, the bottom part of UALIAS is flipped + * depending on which CPU does the access to provide + * all CPUs with unique uncached memory at low addresses. + * LBOOT -- 256MB in size, reads in the LBOOT area result in + * uncached references to the local hub's boot prom and + * other directory-bus connected devices. + * IALIAS -- 8MB in size, reads in the IALIAS result in uncached + * references to the local hub's registers. + */ + +#define UALIAS_BASE HSPEC_BASE +#define UALIAS_SIZE 0x10000000 /* 256 Megabytes */ +#define UALIAS_LIMIT (UALIAS_BASE + UALIAS_SIZE) + +/* + * The bottom of ualias space is flipped depending on whether you're + * processor 0 or 1 within a node. + */ +#ifdef CONFIG_SGI_IP27 +#define UALIAS_FLIP_BASE UALIAS_BASE +#define UALIAS_FLIP_SIZE 0x20000 +#define UALIAS_FLIP_BIT 0x10000 +#define UALIAS_FLIP_ADDR(_x) (cputoslice(smp_processor_id()) ? \ + (_x) ^ UALIAS_FLIP_BIT : (_x)) + +#define LBOOT_BASE (HSPEC_BASE + 0x10000000) +#define LBOOT_SIZE 0x10000000 +#define LBOOT_LIMIT (LBOOT_BASE + LBOOT_SIZE) +#define LBOOT_STRIDE 0 /* IP27 has only one CPU PROM */ + +#endif + +#define HUB_REGISTER_WIDGET 1 +#define IALIAS_BASE NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET) +#define IALIAS_SIZE 0x800000 /* 8 Megabytes */ +#define IS_IALIAS(_a) (((_a) >= IALIAS_BASE) && \ + ((_a) < (IALIAS_BASE + IALIAS_SIZE))) + +/* + * Macro for referring to Hub's RBOOT space + */ + +#ifdef CONFIG_SGI_IP27 +#define RBOOT_SIZE 0x10000000 /* 256 Megabytes */ +#define NODE_RBOOT_BASE(_n) (NODE_HSPEC_BASE(_n) + 0x30000000) +#define NODE_RBOOT_LIMIT(_n) (NODE_RBOOT_BASE(_n) + RBOOT_SIZE) + +#endif + +/* + * Macros for referring the Hub's back door space + * + * These macros correctly process addresses in any node's space. + * WARNING: They won't work in assembler. + * + * BDDIR_ENTRY_LO returns the address of the low double-word of the dir + * entry corresponding to a physical (Cac or Uncac) address. + * BDDIR_ENTRY_HI returns the address of the high double-word of the entry. + * BDPRT_ENTRY returns the address of the double-word protection entry + * corresponding to the page containing the physical address. + * BDPRT_ENTRY_S Stores the value into the protection entry. + * BDPRT_ENTRY_L Load the value from the protection entry. + * BDECC_ENTRY returns the address of the ECC byte corresponding to a + * double-word at a specified physical address. + * BDECC_ENTRY_H returns the address of the two ECC bytes corresponding to a + * quad-word at a specified physical address. + */ +#define NODE_BDOOR_BASE(_n) (NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2)) + +#define NODE_BDECC_BASE(_n) (NODE_BDOOR_BASE(_n)) +#define NODE_BDDIR_BASE(_n) (NODE_BDOOR_BASE(_n) + (NODE_ADDRSPACE_SIZE/4)) +#ifdef CONFIG_SGI_IP27 +#define BDDIR_ENTRY_LO(_pa) ((HSPEC_BASE + \ + NODE_ADDRSPACE_SIZE * 3 / 4 + \ + 0x200) | \ + UINT64_CAST(_pa) & NASID_MASK | \ + UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \ + UINT64_CAST(_pa) >> 3 & 0x1f << 4) + +#define BDDIR_ENTRY_HI(_pa) ((HSPEC_BASE + \ + NODE_ADDRSPACE_SIZE * 3 / 4 + \ + 0x208) | \ + UINT64_CAST(_pa) & NASID_MASK | \ + UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \ + UINT64_CAST(_pa) >> 3 & 0x1f << 4) + +#define BDPRT_ENTRY(_pa, _rgn) ((HSPEC_BASE + \ + NODE_ADDRSPACE_SIZE * 3 / 4) | \ + UINT64_CAST(_pa) & NASID_MASK | \ + UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \ + (_rgn) << 3) +#define BDPRT_ENTRY_ADDR(_pa, _rgn) (BDPRT_ENTRY((_pa), (_rgn))) +#define BDPRT_ENTRY_S(_pa, _rgn, _val) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn))=(_val)) +#define BDPRT_ENTRY_L(_pa, _rgn) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn))) + +#define BDECC_ENTRY(_pa) ((HSPEC_BASE + \ + NODE_ADDRSPACE_SIZE / 2) | \ + UINT64_CAST(_pa) & NASID_MASK | \ + UINT64_CAST(_pa) >> 2 & BDECC_UPPER_MASK | \ + UINT64_CAST(_pa) >> 3 & 3) + +/* + * Macro to convert a back door directory or protection address into the + * raw physical address of the associated cache line or protection page. + */ +#define BDADDR_IS_DIR(_ba) ((UINT64_CAST (_ba) & 0x200) != 0) +#define BDADDR_IS_PRT(_ba) ((UINT64_CAST (_ba) & 0x200) == 0) + +#define BDDIR_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ + (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2 | \ + (UINT64_CAST(_ba) & 0x1f << 4) << 3) + +#define BDPRT_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ + (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2) + +#define BDECC_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ + (UINT64_CAST(_ba) & BDECC_UPPER_MASK)<<2 | \ + (UINT64_CAST(_ba) & 3) << 3) +#endif /* CONFIG_SGI_IP27 */ + + +/* + * The following macros produce the correct base virtual address for + * the hub registers. The LOCAL_HUB_* macros produce the appropriate + * address for the local registers. The REMOTE_HUB_* macro produce + * the address for the specified hub's registers. The intent is + * that the appropriate PI, MD, NI, or II register would be substituted + * for _x. + */ + +/* + * WARNING: + * When certain Hub chip workaround are defined, it's not sufficient + * to dereference the *_HUB_ADDR() macros. You should instead use + * HUB_L() and HUB_S() if you must deal with pointers to hub registers. + * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S(). + * They're always safe. + */ +#define LOCAL_HUB_ADDR(_x) (HUBREG_CAST (IALIAS_BASE + (_x))) +#define REMOTE_HUB_ADDR(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ + 0x800000 + (_x))) +#ifdef CONFIG_SGI_IP27 +#define REMOTE_HUB_PI_ADDR(_n, _sn, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ + 0x800000 + (_x))) +#endif /* CONFIG_SGI_IP27 */ + +#ifndef __ASSEMBLY__ + +#define HUB_L(_a) *(_a) +#define HUB_S(_a, _d) *(_a) = (_d) + +#define LOCAL_HUB_L(_r) HUB_L(LOCAL_HUB_ADDR(_r)) +#define LOCAL_HUB_S(_r, _d) HUB_S(LOCAL_HUB_ADDR(_r), (_d)) +#define REMOTE_HUB_L(_n, _r) HUB_L(REMOTE_HUB_ADDR((_n), (_r))) +#define REMOTE_HUB_S(_n, _r, _d) HUB_S(REMOTE_HUB_ADDR((_n), (_r)), (_d)) +#define REMOTE_HUB_PI_L(_n, _sn, _r) HUB_L(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r))) +#define REMOTE_HUB_PI_S(_n, _sn, _r, _d) HUB_S(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)), (_d)) + +#endif /* !__ASSEMBLY__ */ + +/* + * The following macros are used to get to a hub/bridge register, given + * the base of the register space. + */ +#define HUB_REG_PTR(_base, _off) \ + (HUBREG_CAST((__psunsigned_t)(_base) + (__psunsigned_t)(_off))) + +#define HUB_REG_PTR_L(_base, _off) \ + HUB_L(HUB_REG_PTR((_base), (_off))) + +#define HUB_REG_PTR_S(_base, _off, _data) \ + HUB_S(HUB_REG_PTR((_base), (_off)), (_data)) + +/* + * Software structure locations -- permanently fixed + * See diagram in kldir.h + */ + +#define PHYS_RAMBASE 0x0 +#define K0_RAMBASE PHYS_TO_K0(PHYS_RAMBASE) + +#define EX_HANDLER_OFFSET(slice) ((slice) << 16) +#define EX_HANDLER_ADDR(nasid, slice) \ + PHYS_TO_K0(NODE_OFFSET(nasid) | EX_HANDLER_OFFSET(slice)) +#define EX_HANDLER_SIZE 0x0400 + +#define EX_FRAME_OFFSET(slice) ((slice) << 16 | 0x400) +#define EX_FRAME_ADDR(nasid, slice) \ + PHYS_TO_K0(NODE_OFFSET(nasid) | EX_FRAME_OFFSET(slice)) +#define EX_FRAME_SIZE 0x0c00 + +#define ARCS_SPB_OFFSET 0x1000 +#define ARCS_SPB_ADDR(nasid) \ + PHYS_TO_K0(NODE_OFFSET(nasid) | ARCS_SPB_OFFSET) +#define ARCS_SPB_SIZE 0x0400 + +#define KLDIR_OFFSET 0x2000 +#define KLDIR_ADDR(nasid) \ + TO_NODE_UNCAC((nasid), KLDIR_OFFSET) +#define KLDIR_SIZE 0x0400 + + +/* + * Software structure locations -- indirected through KLDIR + * See diagram in kldir.h + * + * Important: All low memory structures must only be accessed + * uncached, except for the symmon stacks. + */ + +#define KLI_LAUNCH 0 /* Dir. entries */ +#define KLI_KLCONFIG 1 +#define KLI_NMI 2 +#define KLI_GDA 3 +#define KLI_FREEMEM 4 +#define KLI_SYMMON_STK 5 +#define KLI_PI_ERROR 6 +#define KLI_KERN_VARS 7 +#define KLI_KERN_XP 8 +#define KLI_KERN_PARTID 9 + +#ifndef __ASSEMBLY__ + +#define KLD_BASE(nasid) ((kldir_ent_t *) KLDIR_ADDR(nasid)) +#define KLD_LAUNCH(nasid) (KLD_BASE(nasid) + KLI_LAUNCH) +#define KLD_NMI(nasid) (KLD_BASE(nasid) + KLI_NMI) +#define KLD_KLCONFIG(nasid) (KLD_BASE(nasid) + KLI_KLCONFIG) +#define KLD_PI_ERROR(nasid) (KLD_BASE(nasid) + KLI_PI_ERROR) +#define KLD_GDA(nasid) (KLD_BASE(nasid) + KLI_GDA) +#define KLD_SYMMON_STK(nasid) (KLD_BASE(nasid) + KLI_SYMMON_STK) +#define KLD_FREEMEM(nasid) (KLD_BASE(nasid) + KLI_FREEMEM) +#define KLD_KERN_VARS(nasid) (KLD_BASE(nasid) + KLI_KERN_VARS) +#define KLD_KERN_XP(nasid) (KLD_BASE(nasid) + KLI_KERN_XP) +#define KLD_KERN_PARTID(nasid) (KLD_BASE(nasid) + KLI_KERN_PARTID) + +#define LAUNCH_OFFSET(nasid, slice) \ + (KLD_LAUNCH(nasid)->offset + \ + KLD_LAUNCH(nasid)->stride * (slice)) +#define LAUNCH_ADDR(nasid, slice) \ + TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice)) +#define LAUNCH_SIZE(nasid) KLD_LAUNCH(nasid)->size + +#define NMI_OFFSET(nasid, slice) \ + (KLD_NMI(nasid)->offset + \ + KLD_NMI(nasid)->stride * (slice)) +#define NMI_ADDR(nasid, slice) \ + TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice)) +#define NMI_SIZE(nasid) KLD_NMI(nasid)->size + +#define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset +#define KLCONFIG_ADDR(nasid) \ + TO_NODE_UNCAC((nasid), KLCONFIG_OFFSET(nasid)) +#define KLCONFIG_SIZE(nasid) KLD_KLCONFIG(nasid)->size + +#define GDA_ADDR(nasid) KLD_GDA(nasid)->pointer +#define GDA_SIZE(nasid) KLD_GDA(nasid)->size + +#define SYMMON_STK_OFFSET(nasid, slice) \ + (KLD_SYMMON_STK(nasid)->offset + \ + KLD_SYMMON_STK(nasid)->stride * (slice)) +#define SYMMON_STK_STRIDE(nasid) KLD_SYMMON_STK(nasid)->stride + +#define SYMMON_STK_ADDR(nasid, slice) \ + TO_NODE_CAC((nasid), SYMMON_STK_OFFSET(nasid, slice)) + +#define SYMMON_STK_SIZE(nasid) KLD_SYMMON_STK(nasid)->stride + +#define SYMMON_STK_END(nasid) (SYMMON_STK_ADDR(nasid, 0) + KLD_SYMMON_STK(nasid)->size) + +/* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a + * relocatable program + */ +#define UNIX_DEBUG_LOADADDR 0x300000 +#define SYMMON_LOADADDR(nasid) \ + TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000)) + +#define FREEMEM_OFFSET(nasid) KLD_FREEMEM(nasid)->offset +#define FREEMEM_ADDR(nasid) SYMMON_STK_END(nasid) +/* + * XXX + * Fix this. FREEMEM_ADDR should be aware of if symmon is loaded. + * Also, it should take into account what prom thinks to be a safe + * address + PHYS_TO_K0(NODE_OFFSET(nasid) + FREEMEM_OFFSET(nasid)) + */ +#define FREEMEM_SIZE(nasid) KLD_FREEMEM(nasid)->size + +#define PI_ERROR_OFFSET(nasid) KLD_PI_ERROR(nasid)->offset +#define PI_ERROR_ADDR(nasid) \ + TO_NODE_UNCAC((nasid), PI_ERROR_OFFSET(nasid)) +#define PI_ERROR_SIZE(nasid) KLD_PI_ERROR(nasid)->size + +#define NODE_OFFSET_TO_K0(_nasid, _off) \ + PHYS_TO_K0((NODE_OFFSET(_nasid) + (_off)) | CAC_BASE) +#define NODE_OFFSET_TO_K1(_nasid, _off) \ + TO_UNCAC((NODE_OFFSET(_nasid) + (_off)) | UNCAC_BASE) +#define K0_TO_NODE_OFFSET(_k0addr) \ + ((__psunsigned_t)(_k0addr) & NODE_ADDRSPACE_MASK) + +#define KERN_VARS_ADDR(nasid) KLD_KERN_VARS(nasid)->pointer +#define KERN_VARS_SIZE(nasid) KLD_KERN_VARS(nasid)->size + +#define KERN_XP_ADDR(nasid) KLD_KERN_XP(nasid)->pointer +#define KERN_XP_SIZE(nasid) KLD_KERN_XP(nasid)->size + +#define GPDA_ADDR(nasid) TO_NODE_CAC(nasid, GPDA_OFFSET) + +#endif /* !__ASSEMBLY__ */ + + +#endif /* _ASM_SN_ADDRS_H */ diff --git a/arch/mips/include/asm/sn/agent.h b/arch/mips/include/asm/sn/agent.h new file mode 100644 index 000000000000..ac4ea85c3a5c --- /dev/null +++ b/arch/mips/include/asm/sn/agent.h @@ -0,0 +1,46 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * This file has definitions for the hub and snac interfaces. + * + * Copyright (C) 1992 - 1997, 1999, 2000 Silcon Graphics, Inc. + * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_SGI_SN_AGENT_H +#define _ASM_SGI_SN_AGENT_H + +#include +#include +#include + +#if defined(CONFIG_SGI_IP27) +#include +#elif defined(CONFIG_SGI_IP35) +#include +#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */ + +/* + * NIC register macros + */ + +#if defined(CONFIG_SGI_IP27) +#define HUB_NIC_ADDR(_cpuid) \ + REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)), \ + MD_MLAN_CTL) +#endif + +#define SET_HUB_NIC(_my_cpuid, _val) \ + (HUB_S(HUB_NIC_ADDR(_my_cpuid), (_val))) + +#define SET_MY_HUB_NIC(_v) \ + SET_HUB_NIC(cpuid(), (_v)) + +#define GET_HUB_NIC(_my_cpuid) \ + (HUB_L(HUB_NIC_ADDR(_my_cpuid))) + +#define GET_MY_HUB_NIC() \ + GET_HUB_NIC(cpuid()) + +#endif /* _ASM_SGI_SN_AGENT_H */ diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h new file mode 100644 index 000000000000..bd75945e10ff --- /dev/null +++ b/arch/mips/include/asm/sn/arch.h @@ -0,0 +1,64 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI specific setup. + * + * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc. + * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_SN_ARCH_H +#define _ASM_SN_ARCH_H + +#include +#include +#ifdef CONFIG_SGI_IP27 +#include +#endif + +typedef u64 hubreg_t; + +#define cputonasid(cpu) (sn_cpu_info[(cpu)].p_nasid) +#define cputoslice(cpu) (sn_cpu_info[(cpu)].p_slice) +#define makespnum(_nasid, _slice) \ + (((_nasid) << CPUS_PER_NODE_SHFT) | (_slice)) + +#define INVALID_NASID (nasid_t)-1 +#define INVALID_CNODEID (cnodeid_t)-1 +#define INVALID_PNODEID (pnodeid_t)-1 +#define INVALID_MODULE (moduleid_t)-1 +#define INVALID_PARTID (partid_t)-1 + +extern nasid_t get_nasid(void); +extern cnodeid_t get_cpu_cnode(cpuid_t); +extern int get_cpu_slice(cpuid_t); + +/* + * NO ONE should access these arrays directly. The only reason we refer to + * them here is to avoid the procedure call that would be required in the + * macros below. (Really want private data members here :-) + */ +extern cnodeid_t nasid_to_compact_node[MAX_NASIDS]; +extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; + +/* + * These macros are used by various parts of the kernel to convert + * between the three different kinds of node numbering. At least some + * of them may change to procedure calls in the future, but the macros + * will continue to work. Don't use the arrays above directly. + */ + +#define NASID_TO_REGION(nnode) \ + ((nnode) >> \ + (is_fine_dirmode() ? NASID_TO_FINEREG_SHFT : NASID_TO_COARSEREG_SHFT)) + +extern cnodeid_t nasid_to_compact_node[MAX_NASIDS]; +extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; +extern cnodeid_t cpuid_to_compact_node[MAXCPUS]; + +#define NASID_TO_COMPACT_NODEID(nnode) (nasid_to_compact_node[nnode]) +#define COMPACT_TO_NASID_NODEID(cnode) (compact_to_nasid_node[cnode]) +#define CPUID_TO_COMPACT_NODEID(cpu) (cpuid_to_compact_node[(cpu)]) + +#endif /* _ASM_SN_ARCH_H */ diff --git a/arch/mips/include/asm/sn/fru.h b/arch/mips/include/asm/sn/fru.h new file mode 100644 index 000000000000..b3e3606723b7 --- /dev/null +++ b/arch/mips/include/asm/sn/fru.h @@ -0,0 +1,44 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX + * + * Copyright (C) 1992 - 1997, 1999 Silcon Graphics, Inc. + * Copyright (C) 1999, 2006 Ralf Baechle (ralf@linux-mips) + */ +#ifndef __ASM_SN_FRU_H +#define __ASM_SN_FRU_H + +#define MAX_DIMMS 8 /* max # of dimm banks */ +#define MAX_PCIDEV 8 /* max # of pci devices on a pci bus */ + +typedef unsigned char confidence_t; + +typedef struct kf_mem_s { + confidence_t km_confidence; /* confidence level that the memory is bad + * is this necessary ? + */ + confidence_t km_dimm[MAX_DIMMS]; + /* confidence level that dimm[i] is bad + *I think this is the right number + */ + +} kf_mem_t; + +typedef struct kf_cpu_s { + confidence_t kc_confidence; /* confidence level that cpu is bad */ + confidence_t kc_icache; /* confidence level that instr. cache is bad */ + confidence_t kc_dcache; /* confidence level that data cache is bad */ + confidence_t kc_scache; /* confidence level that sec. cache is bad */ + confidence_t kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */ +} kf_cpu_t; + +typedef struct kf_pci_bus_s { + confidence_t kpb_belief; /* confidence level that the pci bus is bad */ + confidence_t kpb_pcidev_belief[MAX_PCIDEV]; + /* confidence level that the pci dev is bad */ +} kf_pci_bus_t; + +#endif /* __ASM_SN_FRU_H */ diff --git a/arch/mips/include/asm/sn/gda.h b/arch/mips/include/asm/sn/gda.h new file mode 100644 index 000000000000..9cb6ff770915 --- /dev/null +++ b/arch/mips/include/asm/sn/gda.h @@ -0,0 +1,107 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX . + * + * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc. + * + * gda.h -- Contains the data structure for the global data area, + * The GDA contains information communicated between the + * PROM, SYMMON, and the kernel. + */ +#ifndef _ASM_SN_GDA_H +#define _ASM_SN_GDA_H + +#include + +#define GDA_MAGIC 0x58464552 + +/* + * GDA Version History + * + * Version # | Change + * -------------+------------------------------------------------------- + * 1 | Initial SN0 version + * 2 | Prom sets g_partid field to the partition number. 0 IS + * | a valid partition #. + */ + +#define GDA_VERSION 2 /* Current GDA version # */ + +#define G_MAGICOFF 0 +#define G_VERSIONOFF 4 +#define G_PROMOPOFF 6 +#define G_MASTEROFF 8 +#define G_VDSOFF 12 +#define G_HKDNORMOFF 16 +#define G_HKDUTLBOFF 24 +#define G_HKDXUTLBOFF 32 +#define G_PARTIDOFF 40 +#define G_TABLEOFF 128 + +#ifndef __ASSEMBLY__ + +typedef struct gda { + u32 g_magic; /* GDA magic number */ + u16 g_version; /* Version of this structure */ + u16 g_masterid; /* The NASID:CPUNUM of the master cpu */ + u32 g_promop; /* Passes requests from the kernel to prom */ + u32 g_vds; /* Store the virtual dipswitches here */ + void **g_hooked_norm;/* ptr to pda loc for norm hndlr */ + void **g_hooked_utlb;/* ptr to pda loc for utlb hndlr */ + void **g_hooked_xtlb;/* ptr to pda loc for xtlb hndlr */ + int g_partid; /* partition id */ + int g_symmax; /* Max symbols in name table. */ + void *g_dbstab; /* Address of idbg symbol table */ + char *g_nametab; /* Address of idbg name table */ + void *g_ktext_repmask; + /* Pointer to a mask of nodes with copies + * of the kernel. */ + char g_padding[56]; /* pad out to 128 bytes */ + nasid_t g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node, + * indexed by cnodeid. + */ +} gda_t; + +#define GDA ((gda_t*) GDA_ADDR(get_nasid())) + +#endif /* !__ASSEMBLY__ */ +/* + * Define: PART_GDA_VERSION + * Purpose: Define the minimum version of the GDA required, lower + * revisions assume GDA is NOT set up, and read partition + * information from the board info. + */ +#define PART_GDA_VERSION 2 + +/* + * The following requests can be sent to the PROM during startup. + */ + +#define PROMOP_MAGIC 0x0ead0000 +#define PROMOP_MAGIC_MASK 0x0fff0000 + +#define PROMOP_BIST_SHIFT 11 +#define PROMOP_BIST_MASK (0x3 << 11) + +#define PROMOP_REG PI_ERR_STACK_ADDR_A + +#define PROMOP_INVALID (PROMOP_MAGIC | 0x00) +#define PROMOP_HALT (PROMOP_MAGIC | 0x10) +#define PROMOP_POWERDOWN (PROMOP_MAGIC | 0x20) +#define PROMOP_RESTART (PROMOP_MAGIC | 0x30) +#define PROMOP_REBOOT (PROMOP_MAGIC | 0x40) +#define PROMOP_IMODE (PROMOP_MAGIC | 0x50) + +#define PROMOP_CMD_MASK 0x00f0 +#define PROMOP_OPTIONS_MASK 0xfff0 + +#define PROMOP_SKIP_DIAGS 0x0100 /* don't bother running diags */ +#define PROMOP_SKIP_MEMINIT 0x0200 /* don't bother initing memory */ +#define PROMOP_SKIP_DEVINIT 0x0400 /* don't bother initing devices */ +#define PROMOP_BIST1 0x0800 /* keep track of which BIST ran */ +#define PROMOP_BIST2 0x1000 /* keep track of which BIST ran */ + +#endif /* _ASM_SN_GDA_H */ diff --git a/arch/mips/include/asm/sn/hub.h b/arch/mips/include/asm/sn/hub.h new file mode 100644 index 000000000000..1992d9254a08 --- /dev/null +++ b/arch/mips/include/asm/sn/hub.h @@ -0,0 +1,16 @@ +#ifndef __ASM_SN_HUB_H +#define __ASM_SN_HUB_H + +#include +#include +#include +#include +#include +#include + +/* ip27-hubio.c */ +extern unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, + unsigned long xtalk_addr, size_t size); +extern void hub_pio_init(cnodeid_t cnode); + +#endif /* __ASM_SN_HUB_H */ diff --git a/arch/mips/include/asm/sn/intr.h b/arch/mips/include/asm/sn/intr.h new file mode 100644 index 000000000000..6718b644b970 --- /dev/null +++ b/arch/mips/include/asm/sn/intr.h @@ -0,0 +1,129 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997 Silicon Graphics, Inc. + */ +#ifndef __ASM_SN_INTR_H +#define __ASM_SN_INTR_H + +/* Number of interrupt levels associated with each interrupt register. */ +#define N_INTPEND_BITS 64 + +#define INT_PEND0_BASELVL 0 +#define INT_PEND1_BASELVL 64 + +#define N_INTPENDJUNK_BITS 8 +#define INTPENDJUNK_CLRBIT 0x80 + +/* + * Macros to manipulate the interrupt register on the calling hub chip. + */ + +#define LOCAL_HUB_SEND_INTR(level) \ + LOCAL_HUB_S(PI_INT_PEND_MOD, (0x100 | (level))) +#define REMOTE_HUB_SEND_INTR(hub, level) \ + REMOTE_HUB_S((hub), PI_INT_PEND_MOD, (0x100 | (level))) + +/* + * When clearing the interrupt, make sure this clear does make it + * to the hub. Otherwise we could end up losing interrupts. + * We do an uncached load of the int_pend0 register to ensure this. + */ + +#define LOCAL_HUB_CLR_INTR(level) \ +do { \ + LOCAL_HUB_S(PI_INT_PEND_MOD, (level)); \ + LOCAL_HUB_L(PI_INT_PEND0); \ +} while (0); + +#define REMOTE_HUB_CLR_INTR(hub, level) \ +do { \ + nasid_t __hub = (hub); \ + \ + REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level)); \ + REMOTE_HUB_L(__hub, PI_INT_PEND0); \ +} while (0); + +/* + * Hard-coded interrupt levels: + */ + +/* + * L0 = SW1 + * L1 = SW2 + * L2 = INT_PEND0 + * L3 = INT_PEND1 + * L4 = RTC + * L5 = Profiling Timer + * L6 = Hub Errors + * L7 = Count/Compare (T5 counters) + */ + + +/* + * INT_PEND0 hard-coded bits. + */ + +/* + * INT_PEND0 bits determined by hardware: + */ +#define RESERVED_INTR 0 /* What is this bit? */ +#define GFX_INTR_A 1 +#define GFX_INTR_B 2 +#define PG_MIG_INTR 3 +#define UART_INTR 4 +#define CC_PEND_A 5 +#define CC_PEND_B 6 + +/* + * INT_PEND0 used by the kernel for itself ... + */ +#define CPU_RESCHED_A_IRQ 7 +#define CPU_RESCHED_B_IRQ 8 +#define CPU_CALL_A_IRQ 9 +#define CPU_CALL_B_IRQ 10 +#define MSC_MESG_INTR 11 +#define BASE_PCI_IRQ 12 + +/* + * INT_PEND0 again, bits determined by hardware / hardcoded: + */ +#define SDISK_INTR 63 /* SABLE name */ +#define IP_PEND0_6_63 63 /* What is this bit? */ + +/* + * INT_PEND1 hard-coded bits: + */ +#define NI_BRDCAST_ERR_A 39 +#define NI_BRDCAST_ERR_B 40 + +#define LLP_PFAIL_INTR_A 41 /* see ml/SN/SN0/sysctlr.c */ +#define LLP_PFAIL_INTR_B 42 + +#define TLB_INTR_A 43 /* used for tlb flush random */ +#define TLB_INTR_B 44 + +#define IP27_INTR_0 45 /* Reserved for PROM use */ +#define IP27_INTR_1 46 /* do not use in Kernel */ +#define IP27_INTR_2 47 +#define IP27_INTR_3 48 +#define IP27_INTR_4 49 +#define IP27_INTR_5 50 +#define IP27_INTR_6 51 +#define IP27_INTR_7 52 + +#define BRIDGE_ERROR_INTR 53 /* Setup by PROM to catch */ + /* Bridge Errors */ +#define DEBUG_INTR_A 54 +#define DEBUG_INTR_B 55 /* Used by symmon to stop all cpus */ +#define IO_ERROR_INTR 57 /* Setup by PROM */ +#define CLK_ERR_INTR 58 +#define COR_ERR_INTR_A 59 +#define COR_ERR_INTR_B 60 +#define MD_COR_ERR_INTR 61 +#define NI_ERROR_INTR 62 +#define MSC_PANIC_INTR 63 + +#endif /* __ASM_SN_INTR_H */ diff --git a/arch/mips/include/asm/sn/io.h b/arch/mips/include/asm/sn/io.h new file mode 100644 index 000000000000..24c6775fbb0f --- /dev/null +++ b/arch/mips/include/asm/sn/io.h @@ -0,0 +1,59 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000, 2003 Ralf Baechle + * Copyright (C) 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_SN_IO_H +#define _ASM_SN_IO_H + +#if defined(CONFIG_SGI_IP27) +#include +#endif + + +#define IIO_ITTE_BASE 0x400160 /* base of translation table entries */ +#define IIO_ITTE(bigwin) (IIO_ITTE_BASE + 8*(bigwin)) + +#define IIO_ITTE_OFFSET_BITS 5 /* size of offset field */ +#define IIO_ITTE_OFFSET_MASK ((1<> BWIN_SIZE_BITS) & \ + IIO_ITTE_OFFSET_MASK) << IIO_ITTE_OFFSET_SHIFT) | \ + (io_or_mem << IIO_ITTE_IOSP_SHIFT) | \ + (((widget) & IIO_ITTE_WIDGET_MASK) << IIO_ITTE_WIDGET_SHIFT))) + +#define IIO_ITTE_DISABLE(nasid, bigwin) \ + IIO_ITTE_PUT((nasid), HUB_PIO_MAP_TO_MEM, \ + (bigwin), IIO_ITTE_INVALID_WIDGET, 0) + +#define IIO_ITTE_GET(nasid, bigwin) REMOTE_HUB_ADDR((nasid), IIO_ITTE(bigwin)) + +/* + * Macro which takes the widget number, and returns the + * IO PRB address of that widget. + * value _x is expected to be a widget number in the range + * 0, 8 - 0xF + */ +#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \ + (_x) : \ + (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) ) + +#endif /* _ASM_SN_IO_H */ diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h new file mode 100644 index 000000000000..099677774d71 --- /dev/null +++ b/arch/mips/include/asm/sn/ioc3.h @@ -0,0 +1,663 @@ +/* + * Copyright (C) 1999, 2000 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _IOC3_H +#define _IOC3_H + +#include + +/* SUPERIO uart register map */ +typedef volatile struct ioc3_uartregs { + union { + volatile u8 rbr; /* read only, DLAB == 0 */ + volatile u8 thr; /* write only, DLAB == 0 */ + volatile u8 dll; /* DLAB == 1 */ + } u1; + union { + volatile u8 ier; /* DLAB == 0 */ + volatile u8 dlm; /* DLAB == 1 */ + } u2; + union { + volatile u8 iir; /* read only */ + volatile u8 fcr; /* write only */ + } u3; + volatile u8 iu_lcr; + volatile u8 iu_mcr; + volatile u8 iu_lsr; + volatile u8 iu_msr; + volatile u8 iu_scr; +} ioc3_uregs_t; + +#define iu_rbr u1.rbr +#define iu_thr u1.thr +#define iu_dll u1.dll +#define iu_ier u2.ier +#define iu_dlm u2.dlm +#define iu_iir u3.iir +#define iu_fcr u3.fcr + +struct ioc3_sioregs { + volatile u8 fill[0x141]; /* starts at 0x141 */ + + volatile u8 uartc; + volatile u8 kbdcg; + + volatile u8 fill0[0x150 - 0x142 - 1]; + + volatile u8 pp_data; + volatile u8 pp_dsr; + volatile u8 pp_dcr; + + volatile u8 fill1[0x158 - 0x152 - 1]; + + volatile u8 pp_fifa; + volatile u8 pp_cfgb; + volatile u8 pp_ecr; + + volatile u8 fill2[0x168 - 0x15a - 1]; + + volatile u8 rtcad; + volatile u8 rtcdat; + + volatile u8 fill3[0x170 - 0x169 - 1]; + + struct ioc3_uartregs uartb; /* 0x20170 */ + struct ioc3_uartregs uarta; /* 0x20178 */ +}; + +/* Register layout of IOC3 in configuration space. */ +struct ioc3 { + volatile u32 pad0[7]; /* 0x00000 */ + volatile u32 sio_ir; /* 0x0001c */ + volatile u32 sio_ies; /* 0x00020 */ + volatile u32 sio_iec; /* 0x00024 */ + volatile u32 sio_cr; /* 0x00028 */ + volatile u32 int_out; /* 0x0002c */ + volatile u32 mcr; /* 0x00030 */ + + /* General Purpose I/O registers */ + volatile u32 gpcr_s; /* 0x00034 */ + volatile u32 gpcr_c; /* 0x00038 */ + volatile u32 gpdr; /* 0x0003c */ + volatile u32 gppr_0; /* 0x00040 */ + volatile u32 gppr_1; /* 0x00044 */ + volatile u32 gppr_2; /* 0x00048 */ + volatile u32 gppr_3; /* 0x0004c */ + volatile u32 gppr_4; /* 0x00050 */ + volatile u32 gppr_5; /* 0x00054 */ + volatile u32 gppr_6; /* 0x00058 */ + volatile u32 gppr_7; /* 0x0005c */ + volatile u32 gppr_8; /* 0x00060 */ + volatile u32 gppr_9; /* 0x00064 */ + volatile u32 gppr_10; /* 0x00068 */ + volatile u32 gppr_11; /* 0x0006c */ + volatile u32 gppr_12; /* 0x00070 */ + volatile u32 gppr_13; /* 0x00074 */ + volatile u32 gppr_14; /* 0x00078 */ + volatile u32 gppr_15; /* 0x0007c */ + + /* Parallel Port Registers */ + volatile u32 ppbr_h_a; /* 0x00080 */ + volatile u32 ppbr_l_a; /* 0x00084 */ + volatile u32 ppcr_a; /* 0x00088 */ + volatile u32 ppcr; /* 0x0008c */ + volatile u32 ppbr_h_b; /* 0x00090 */ + volatile u32 ppbr_l_b; /* 0x00094 */ + volatile u32 ppcr_b; /* 0x00098 */ + + /* Keyboard and Mouse Registers */ + volatile u32 km_csr; /* 0x0009c */ + volatile u32 k_rd; /* 0x000a0 */ + volatile u32 m_rd; /* 0x000a4 */ + volatile u32 k_wd; /* 0x000a8 */ + volatile u32 m_wd; /* 0x000ac */ + + /* Serial Port Registers */ + volatile u32 sbbr_h; /* 0x000b0 */ + volatile u32 sbbr_l; /* 0x000b4 */ + volatile u32 sscr_a; /* 0x000b8 */ + volatile u32 stpir_a; /* 0x000bc */ + volatile u32 stcir_a; /* 0x000c0 */ + volatile u32 srpir_a; /* 0x000c4 */ + volatile u32 srcir_a; /* 0x000c8 */ + volatile u32 srtr_a; /* 0x000cc */ + volatile u32 shadow_a; /* 0x000d0 */ + volatile u32 sscr_b; /* 0x000d4 */ + volatile u32 stpir_b; /* 0x000d8 */ + volatile u32 stcir_b; /* 0x000dc */ + volatile u32 srpir_b; /* 0x000e0 */ + volatile u32 srcir_b; /* 0x000e4 */ + volatile u32 srtr_b; /* 0x000e8 */ + volatile u32 shadow_b; /* 0x000ec */ + + /* Ethernet Registers */ + volatile u32 emcr; /* 0x000f0 */ + volatile u32 eisr; /* 0x000f4 */ + volatile u32 eier; /* 0x000f8 */ + volatile u32 ercsr; /* 0x000fc */ + volatile u32 erbr_h; /* 0x00100 */ + volatile u32 erbr_l; /* 0x00104 */ + volatile u32 erbar; /* 0x00108 */ + volatile u32 ercir; /* 0x0010c */ + volatile u32 erpir; /* 0x00110 */ + volatile u32 ertr; /* 0x00114 */ + volatile u32 etcsr; /* 0x00118 */ + volatile u32 ersr; /* 0x0011c */ + volatile u32 etcdc; /* 0x00120 */ + volatile u32 ebir; /* 0x00124 */ + volatile u32 etbr_h; /* 0x00128 */ + volatile u32 etbr_l; /* 0x0012c */ + volatile u32 etcir; /* 0x00130 */ + volatile u32 etpir; /* 0x00134 */ + volatile u32 emar_h; /* 0x00138 */ + volatile u32 emar_l; /* 0x0013c */ + volatile u32 ehar_h; /* 0x00140 */ + volatile u32 ehar_l; /* 0x00144 */ + volatile u32 micr; /* 0x00148 */ + volatile u32 midr_r; /* 0x0014c */ + volatile u32 midr_w; /* 0x00150 */ + volatile u32 pad1[(0x20000 - 0x00154) / 4]; + + /* SuperIO Registers XXX */ + struct ioc3_sioregs sregs; /* 0x20000 */ + volatile u32 pad2[(0x40000 - 0x20180) / 4]; + + /* SSRAM Diagnostic Access */ + volatile u32 ssram[(0x80000 - 0x40000) / 4]; + + /* Bytebus device offsets + 0x80000 - Access to the generic devices selected with DEV0 + 0x9FFFF bytebus DEV_SEL_0 + 0xA0000 - Access to the generic devices selected with DEV1 + 0xBFFFF bytebus DEV_SEL_1 + 0xC0000 - Access to the generic devices selected with DEV2 + 0xDFFFF bytebus DEV_SEL_2 + 0xE0000 - Access to the generic devices selected with DEV3 + 0xFFFFF bytebus DEV_SEL_3 */ +}; + +/* + * Ethernet RX Buffer + */ +struct ioc3_erxbuf { + u32 w0; /* first word (valid,bcnt,cksum) */ + u32 err; /* second word various errors */ + /* next comes n bytes of padding */ + /* then the received ethernet frame itself */ +}; + +#define ERXBUF_IPCKSUM_MASK 0x0000ffff +#define ERXBUF_BYTECNT_MASK 0x07ff0000 +#define ERXBUF_BYTECNT_SHIFT 16 +#define ERXBUF_V 0x80000000 + +#define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */ +#define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */ +#define ERXBUF_CODERR 0x00000004 /* aka RSV13 */ +#define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */ +#define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */ +#define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */ +#define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */ +#define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */ +#define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */ +#define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */ +#define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */ +#define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */ + +/* + * Ethernet TX Descriptor + */ +#define ETXD_DATALEN 104 +struct ioc3_etxd { + u32 cmd; /* command field */ + u32 bufcnt; /* buffer counts field */ + u64 p1; /* buffer pointer 1 */ + u64 p2; /* buffer pointer 2 */ + u8 data[ETXD_DATALEN]; /* opt. tx data */ +}; + +#define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */ +#define ETXD_INTWHENDONE 0x00001000 /* intr when done */ +#define ETXD_D0V 0x00010000 /* data 0 valid */ +#define ETXD_B1V 0x00020000 /* buf 1 valid */ +#define ETXD_B2V 0x00040000 /* buf 2 valid */ +#define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */ +#define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */ +#define ETXD_CHKOFF_SHIFT 20 + +#define ETXD_D0CNT_MASK 0x0000007f +#define ETXD_B1CNT_MASK 0x0007ff00 +#define ETXD_B1CNT_SHIFT 8 +#define ETXD_B2CNT_MASK 0x7ff00000 +#define ETXD_B2CNT_SHIFT 20 + +/* + * Bytebus device space + */ +#define IOC3_BYTEBUS_DEV0 0x80000L +#define IOC3_BYTEBUS_DEV1 0xa0000L +#define IOC3_BYTEBUS_DEV2 0xc0000L +#define IOC3_BYTEBUS_DEV3 0xe0000L + +/* ------------------------------------------------------------------------- */ + +/* Superio Registers (PIO Access) */ +#define IOC3_SIO_BASE 0x20000 +#define IOC3_SIO_UARTC (IOC3_SIO_BASE+0x141) /* UART Config */ +#define IOC3_SIO_KBDCG (IOC3_SIO_BASE+0x142) /* KBD Config */ +#define IOC3_SIO_PP_BASE (IOC3_SIO_BASE+PP_BASE) /* Parallel Port */ +#define IOC3_SIO_RTC_BASE (IOC3_SIO_BASE+0x168) /* Real Time Clock */ +#define IOC3_SIO_UB_BASE (IOC3_SIO_BASE+UARTB_BASE) /* UART B */ +#define IOC3_SIO_UA_BASE (IOC3_SIO_BASE+UARTA_BASE) /* UART A */ + +/* SSRAM Diagnostic Access */ +#define IOC3_SSRAM IOC3_RAM_OFF /* base of SSRAM diagnostic access */ +#define IOC3_SSRAM_LEN 0x40000 /* 256kb (address space size, may not be fully populated) */ +#define IOC3_SSRAM_DM 0x0000ffff /* data mask */ +#define IOC3_SSRAM_PM 0x00010000 /* parity mask */ + +/* bitmasks for PCI_SCR */ +#define PCI_SCR_PAR_RESP_EN 0x00000040 /* enb PCI parity checking */ +#define PCI_SCR_SERR_EN 0x00000100 /* enable the SERR# driver */ +#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */ +#define PCI_SCR_RX_SERR (0x1 << 16) +#define PCI_SCR_DROP_MODE (0x1 << 17) +#define PCI_SCR_SIG_PAR_ERR (0x1 << 24) +#define PCI_SCR_SIG_TAR_ABRT (0x1 << 27) +#define PCI_SCR_RX_TAR_ABRT (0x1 << 28) +#define PCI_SCR_SIG_MST_ABRT (0x1 << 29) +#define PCI_SCR_SIG_SERR (0x1 << 30) +#define PCI_SCR_PAR_ERR (0x1 << 31) + +/* bitmasks for IOC3_KM_CSR */ +#define KM_CSR_K_WRT_PEND 0x00000001 /* kbd port xmitting or resetting */ +#define KM_CSR_M_WRT_PEND 0x00000002 /* mouse port xmitting or resetting */ +#define KM_CSR_K_LCB 0x00000004 /* Line Cntrl Bit for last KBD write */ +#define KM_CSR_M_LCB 0x00000008 /* same for mouse */ +#define KM_CSR_K_DATA 0x00000010 /* state of kbd data line */ +#define KM_CSR_K_CLK 0x00000020 /* state of kbd clock line */ +#define KM_CSR_K_PULL_DATA 0x00000040 /* pull kbd data line low */ +#define KM_CSR_K_PULL_CLK 0x00000080 /* pull kbd clock line low */ +#define KM_CSR_M_DATA 0x00000100 /* state of ms data line */ +#define KM_CSR_M_CLK 0x00000200 /* state of ms clock line */ +#define KM_CSR_M_PULL_DATA 0x00000400 /* pull ms data line low */ +#define KM_CSR_M_PULL_CLK 0x00000800 /* pull ms clock line low */ +#define KM_CSR_EMM_MODE 0x00001000 /* emulation mode */ +#define KM_CSR_SIM_MODE 0x00002000 /* clock X8 */ +#define KM_CSR_K_SM_IDLE 0x00004000 /* Keyboard is idle */ +#define KM_CSR_M_SM_IDLE 0x00008000 /* Mouse is idle */ +#define KM_CSR_K_TO 0x00010000 /* Keyboard trying to send/receive */ +#define KM_CSR_M_TO 0x00020000 /* Mouse trying to send/receive */ +#define KM_CSR_K_TO_EN 0x00040000 /* KM_CSR_K_TO + KM_CSR_K_TO_EN = cause + SIO_IR to assert */ +#define KM_CSR_M_TO_EN 0x00080000 /* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause + SIO_IR to assert */ +#define KM_CSR_K_CLAMP_ONE 0x00100000 /* Pull K_CLK low after rec. one char */ +#define KM_CSR_M_CLAMP_ONE 0x00200000 /* Pull M_CLK low after rec. one char */ +#define KM_CSR_K_CLAMP_THREE 0x00400000 /* Pull K_CLK low after rec. three chars */ +#define KM_CSR_M_CLAMP_THREE 0x00800000 /* Pull M_CLK low after rec. three char */ + +/* bitmasks for IOC3_K_RD and IOC3_M_RD */ +#define KM_RD_DATA_2 0x000000ff /* 3rd char recvd since last read */ +#define KM_RD_DATA_2_SHIFT 0 +#define KM_RD_DATA_1 0x0000ff00 /* 2nd char recvd since last read */ +#define KM_RD_DATA_1_SHIFT 8 +#define KM_RD_DATA_0 0x00ff0000 /* 1st char recvd since last read */ +#define KM_RD_DATA_0_SHIFT 16 +#define KM_RD_FRAME_ERR_2 0x01000000 /* framing or parity error in byte 2 */ +#define KM_RD_FRAME_ERR_1 0x02000000 /* same for byte 1 */ +#define KM_RD_FRAME_ERR_0 0x04000000 /* same for byte 0 */ + +#define KM_RD_KBD_MSE 0x08000000 /* 0 if from kbd, 1 if from mouse */ +#define KM_RD_OFLO 0x10000000 /* 4th char recvd before this read */ +#define KM_RD_VALID_2 0x20000000 /* DATA_2 valid */ +#define KM_RD_VALID_1 0x40000000 /* DATA_1 valid */ +#define KM_RD_VALID_0 0x80000000 /* DATA_0 valid */ +#define KM_RD_VALID_ALL (KM_RD_VALID_0|KM_RD_VALID_1|KM_RD_VALID_2) + +/* bitmasks for IOC3_K_WD & IOC3_M_WD */ +#define KM_WD_WRT_DATA 0x000000ff /* write to keyboard/mouse port */ +#define KM_WD_WRT_DATA_SHIFT 0 + +/* bitmasks for serial RX status byte */ +#define RXSB_OVERRUN 0x01 /* char(s) lost */ +#define RXSB_PAR_ERR 0x02 /* parity error */ +#define RXSB_FRAME_ERR 0x04 /* framing error */ +#define RXSB_BREAK 0x08 /* break character */ +#define RXSB_CTS 0x10 /* state of CTS */ +#define RXSB_DCD 0x20 /* state of DCD */ +#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */ +#define RXSB_DATA_VALID 0x80 /* data byte, FRAME_ERR PAR_ERR & BREAK valid */ + +/* bitmasks for serial TX control byte */ +#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */ +#define TXCB_INVALID 0x00 /* byte is invalid */ +#define TXCB_VALID 0x40 /* byte is valid */ +#define TXCB_MCR 0x80 /* data<7:0> to modem control register */ +#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */ + +/* bitmasks for IOC3_SBBR_L */ +#define SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */ +#define SBBR_L_BASE 0xfffff000 /* lower serial ring base addr */ + +/* bitmasks for IOC3_SSCR_ */ +#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */ +#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ +#define SSCR_HFC_EN 0x00020000 /* hardware flow control enabled */ +#define SSCR_RX_RING_DCD 0x00040000 /* post RX record on delta-DCD */ +#define SSCR_RX_RING_CTS 0x00080000 /* post RX record on delta-CTS */ +#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */ +#define SSCR_DIAG 0x00200000 /* bypass clock divider for sim */ +#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */ +#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */ +#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */ +#define SSCR_PAUSE_STATE 0x40000000 /* sets when PAUSE takes effect */ +#define SSCR_RESET 0x80000000 /* reset DMA channels */ + +/* all producer/comsumer pointers are the same bitfield */ +#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */ +#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */ +#define PROD_CONS_PTR_OFF 3 + +/* bitmasks for IOC3_SRCIR_ */ +#define SRCIR_ARM 0x80000000 /* arm RX timer */ + +/* bitmasks for IOC3_SRPIR_ */ +#define SRPIR_BYTE_CNT 0x07000000 /* bytes in packer */ +#define SRPIR_BYTE_CNT_SHIFT 24 + +/* bitmasks for IOC3_STCIR_ */ +#define STCIR_BYTE_CNT 0x0f000000 /* bytes in unpacker */ +#define STCIR_BYTE_CNT_SHIFT 24 + +/* bitmasks for IOC3_SHADOW_ */ +#define SHADOW_DR 0x00000001 /* data ready */ +#define SHADOW_OE 0x00000002 /* overrun error */ +#define SHADOW_PE 0x00000004 /* parity error */ +#define SHADOW_FE 0x00000008 /* framing error */ +#define SHADOW_BI 0x00000010 /* break interrupt */ +#define SHADOW_THRE 0x00000020 /* transmit holding register empty */ +#define SHADOW_TEMT 0x00000040 /* transmit shift register empty */ +#define SHADOW_RFCE 0x00000080 /* char in RX fifo has an error */ +#define SHADOW_DCTS 0x00010000 /* delta clear to send */ +#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */ +#define SHADOW_CTS 0x00100000 /* clear to send */ +#define SHADOW_DCD 0x00800000 /* data carrier detect */ +#define SHADOW_DTR 0x01000000 /* data terminal ready */ +#define SHADOW_RTS 0x02000000 /* request to send */ +#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ +#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ +#define SHADOW_LOOP 0x10000000 /* loopback enabled */ + +/* bitmasks for IOC3_SRTR_ */ +#define SRTR_CNT 0x00000fff /* reload value for RX timer */ +#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */ +#define SRTR_CNT_VAL_SHIFT 16 +#define SRTR_HZ 16000 /* SRTR clock frequency */ + +/* bitmasks for IOC3_SIO_IR, IOC3_SIO_IEC and IOC3_SIO_IES */ +#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */ +#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */ +#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */ +#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */ +#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */ +#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */ +#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */ +#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */ +#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */ +#define SIO_IR_SB_TX_MT 0x00000200 /* */ +#define SIO_IR_SB_RX_FULL 0x00000400 /* */ +#define SIO_IR_SB_RX_HIGH 0x00000800 /* */ +#define SIO_IR_SB_RX_TIMER 0x00001000 /* */ +#define SIO_IR_SB_DELTA_DCD 0x00002000 /* */ +#define SIO_IR_SB_DELTA_CTS 0x00004000 /* */ +#define SIO_IR_SB_INT 0x00008000 /* */ +#define SIO_IR_SB_TX_EXPLICIT 0x00010000 /* */ +#define SIO_IR_SB_MEMERR 0x00020000 /* */ +#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */ +#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */ +#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */ +#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */ +#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */ +#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */ +#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */ +#define SIO_IR_GEN_INT_SHIFT 28 + +/* per device interrupt masks */ +#define SIO_IR_SA (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL | \ + SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER | \ + SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS | \ + SIO_IR_SA_INT | SIO_IR_SA_TX_EXPLICIT | \ + SIO_IR_SA_MEMERR) +#define SIO_IR_SB (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL | \ + SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER | \ + SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS | \ + SIO_IR_SB_INT | SIO_IR_SB_TX_EXPLICIT | \ + SIO_IR_SB_MEMERR) +#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \ + SIO_IR_PP_INTB | SIO_IR_PP_MEMERR) +#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1) + +/* macro to load pending interrupts */ +#define IOC3_PENDING_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \ + PCI_INW(&((mem)->sio_ies_ro))) + +/* bitmasks for SIO_CR */ +#define SIO_CR_SIO_RESET 0x00000001 /* reset the SIO */ +#define SIO_CR_SER_A_BASE 0x000000fe /* DMA poll addr port A */ +#define SIO_CR_SER_A_BASE_SHIFT 1 +#define SIO_CR_SER_B_BASE 0x00007f00 /* DMA poll addr port B */ +#define SIO_CR_SER_B_BASE_SHIFT 8 +#define SIO_SR_CMD_PULSE 0x00078000 /* byte bus strobe length */ +#define SIO_CR_CMD_PULSE_SHIFT 15 +#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */ +#define SIO_CR_ARB_DIAG_TXA 0x00000000 +#define SIO_CR_ARB_DIAG_RXA 0x00080000 +#define SIO_CR_ARB_DIAG_TXB 0x00100000 +#define SIO_CR_ARB_DIAG_RXB 0x00180000 +#define SIO_CR_ARB_DIAG_PP 0x00200000 +#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */ + +/* bitmasks for INT_OUT */ +#define INT_OUT_COUNT 0x0000ffff /* pulse interval timer */ +#define INT_OUT_MODE 0x00070000 /* mode mask */ +#define INT_OUT_MODE_0 0x00000000 /* set output to 0 */ +#define INT_OUT_MODE_1 0x00040000 /* set output to 1 */ +#define INT_OUT_MODE_1PULSE 0x00050000 /* send 1 pulse */ +#define INT_OUT_MODE_PULSES 0x00060000 /* send 1 pulse every interval */ +#define INT_OUT_MODE_SQW 0x00070000 /* toggle output every interval */ +#define INT_OUT_DIAG 0x40000000 /* diag mode */ +#define INT_OUT_INT_OUT 0x80000000 /* current state of INT_OUT */ + +/* time constants for INT_OUT */ +#define INT_OUT_NS_PER_TICK (30 * 260) /* 30 ns PCI clock, divisor=260 */ +#define INT_OUT_TICKS_PER_PULSE 3 /* outgoing pulse lasts 3 ticks */ +#define INT_OUT_US_TO_COUNT(x) /* convert uS to a count value */ \ + (((x) * 10 + INT_OUT_NS_PER_TICK / 200) * \ + 100 / INT_OUT_NS_PER_TICK - 1) +#define INT_OUT_COUNT_TO_US(x) /* convert count value to uS */ \ + (((x) + 1) * INT_OUT_NS_PER_TICK / 1000) +#define INT_OUT_MIN_TICKS 3 /* min period is width of pulse in "ticks" */ +#define INT_OUT_MAX_TICKS INT_OUT_COUNT /* largest possible count */ + +/* bitmasks for GPCR */ +#define GPCR_DIR 0x000000ff /* tristate pin input or output */ +#define GPCR_DIR_PIN(x) (1<<(x)) /* access one of the DIR bits */ +#define GPCR_EDGE 0x000f0000 /* extint edge or level sensitive */ +#define GPCR_EDGE_PIN(x) (1<<((x)+15)) /* access one of the EDGE bits */ + +/* values for GPCR */ +#define GPCR_INT_OUT_EN 0x00100000 /* enable INT_OUT to pin 0 */ +#define GPCR_MLAN_EN 0x00200000 /* enable MCR to pin 8 */ +#define GPCR_DIR_SERA_XCVR 0x00000080 /* Port A Transceiver select enable */ +#define GPCR_DIR_SERB_XCVR 0x00000040 /* Port B Transceiver select enable */ +#define GPCR_DIR_PHY_RST 0x00000020 /* ethernet PHY reset enable */ + +/* defs for some of the generic I/O pins */ +#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */ +#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */ +#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */ + +#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */ +#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin controlling uart b mode select */ +#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin controlling uart a mode select */ + +#define EMCR_DUPLEX 0x00000001 +#define EMCR_PROMISC 0x00000002 +#define EMCR_PADEN 0x00000004 +#define EMCR_RXOFF_MASK 0x000001f8 +#define EMCR_RXOFF_SHIFT 3 +#define EMCR_RAMPAR 0x00000200 +#define EMCR_BADPAR 0x00000800 +#define EMCR_BUFSIZ 0x00001000 +#define EMCR_TXDMAEN 0x00002000 +#define EMCR_TXEN 0x00004000 +#define EMCR_RXDMAEN 0x00008000 +#define EMCR_RXEN 0x00010000 +#define EMCR_LOOPBACK 0x00020000 +#define EMCR_ARB_DIAG 0x001c0000 +#define EMCR_ARB_DIAG_IDLE 0x00200000 +#define EMCR_RST 0x80000000 + +#define EISR_RXTIMERINT 0x00000001 +#define EISR_RXTHRESHINT 0x00000002 +#define EISR_RXOFLO 0x00000004 +#define EISR_RXBUFOFLO 0x00000008 +#define EISR_RXMEMERR 0x00000010 +#define EISR_RXPARERR 0x00000020 +#define EISR_TXEMPTY 0x00010000 +#define EISR_TXRTRY 0x00020000 +#define EISR_TXEXDEF 0x00040000 +#define EISR_TXLCOL 0x00080000 +#define EISR_TXGIANT 0x00100000 +#define EISR_TXBUFUFLO 0x00200000 +#define EISR_TXEXPLICIT 0x00400000 +#define EISR_TXCOLLWRAP 0x00800000 +#define EISR_TXDEFERWRAP 0x01000000 +#define EISR_TXMEMERR 0x02000000 +#define EISR_TXPARERR 0x04000000 + +#define ERCSR_THRESH_MASK 0x000001ff /* enet RX threshold */ +#define ERCSR_RX_TMR 0x40000000 /* simulation only */ +#define ERCSR_DIAG_OFLO 0x80000000 /* simulation only */ + +#define ERBR_ALIGNMENT 4096 +#define ERBR_L_RXRINGBASE_MASK 0xfffff000 + +#define ERBAR_BARRIER_BIT 0x0100 +#define ERBAR_RXBARR_MASK 0xffff0000 +#define ERBAR_RXBARR_SHIFT 16 + +#define ERCIR_RXCONSUME_MASK 0x00000fff + +#define ERPIR_RXPRODUCE_MASK 0x00000fff +#define ERPIR_ARM 0x80000000 + +#define ERTR_CNT_MASK 0x000007ff + +#define ETCSR_IPGT_MASK 0x0000007f +#define ETCSR_IPGR1_MASK 0x00007f00 +#define ETCSR_IPGR1_SHIFT 8 +#define ETCSR_IPGR2_MASK 0x007f0000 +#define ETCSR_IPGR2_SHIFT 16 +#define ETCSR_NOTXCLK 0x80000000 + +#define ETCDC_COLLCNT_MASK 0x0000ffff +#define ETCDC_DEFERCNT_MASK 0xffff0000 +#define ETCDC_DEFERCNT_SHIFT 16 + +#define ETBR_ALIGNMENT (64*1024) +#define ETBR_L_RINGSZ_MASK 0x00000001 +#define ETBR_L_RINGSZ128 0 +#define ETBR_L_RINGSZ512 1 +#define ETBR_L_TXRINGBASE_MASK 0xffffc000 + +#define ETCIR_TXCONSUME_MASK 0x0000ffff +#define ETCIR_IDLE 0x80000000 + +#define ETPIR_TXPRODUCE_MASK 0x0000ffff + +#define EBIR_TXBUFPROD_MASK 0x0000001f +#define EBIR_TXBUFCONS_MASK 0x00001f00 +#define EBIR_TXBUFCONS_SHIFT 8 +#define EBIR_RXBUFPROD_MASK 0x007fc000 +#define EBIR_RXBUFPROD_SHIFT 14 +#define EBIR_RXBUFCONS_MASK 0xff800000 +#define EBIR_RXBUFCONS_SHIFT 23 + +#define MICR_REGADDR_MASK 0x0000001f +#define MICR_PHYADDR_MASK 0x000003e0 +#define MICR_PHYADDR_SHIFT 5 +#define MICR_READTRIG 0x00000400 +#define MICR_BUSY 0x00000800 + +#define MIDR_DATA_MASK 0x0000ffff + +#define ERXBUF_IPCKSUM_MASK 0x0000ffff +#define ERXBUF_BYTECNT_MASK 0x07ff0000 +#define ERXBUF_BYTECNT_SHIFT 16 +#define ERXBUF_V 0x80000000 + +#define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */ +#define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */ +#define ERXBUF_CODERR 0x00000004 /* aka RSV13 */ +#define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */ +#define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */ +#define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */ +#define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */ +#define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */ +#define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */ +#define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */ +#define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */ +#define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */ + +#define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */ +#define ETXD_INTWHENDONE 0x00001000 /* intr when done */ +#define ETXD_D0V 0x00010000 /* data 0 valid */ +#define ETXD_B1V 0x00020000 /* buf 1 valid */ +#define ETXD_B2V 0x00040000 /* buf 2 valid */ +#define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */ +#define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */ +#define ETXD_CHKOFF_SHIFT 20 + +#define ETXD_D0CNT_MASK 0x0000007f +#define ETXD_B1CNT_MASK 0x0007ff00 +#define ETXD_B1CNT_SHIFT 8 +#define ETXD_B2CNT_MASK 0x7ff00000 +#define ETXD_B2CNT_SHIFT 20 + +typedef enum ioc3_subdevs_e { + ioc3_subdev_ether, + ioc3_subdev_generic, + ioc3_subdev_nic, + ioc3_subdev_kbms, + ioc3_subdev_ttya, + ioc3_subdev_ttyb, + ioc3_subdev_ecpp, + ioc3_subdev_rt, + ioc3_nsubdevs +} ioc3_subdev_t; + +/* subdevice disable bits, + * from the standard INFO_LBL_SUBDEVS + */ +#define IOC3_SDB_ETHER (1<. + * + * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 1999, 2000 by Ralf Baechle + */ +#ifndef _ASM_SN_KLCONFIG_H +#define _ASM_SN_KLCONFIG_H + +/* + * The KLCONFIG structures store info about the various BOARDs found + * during Hardware Discovery. In addition, it stores info about the + * components found on the BOARDs. + */ + +/* + * WARNING: + * Certain assembly language routines (notably xxxxx.s) in the IP27PROM + * will depend on the format of the data structures in this file. In + * most cases, rearranging the fields can seriously break things. + * Adding fields in the beginning or middle can also break things. + * Add fields if necessary, to the end of a struct in such a way + * that offsets of existing fields do not change. + */ + +#include +#include + +#if defined(CONFIG_SGI_IP27) + +#include +//#include +// XXX Stolen from : +#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ +#include +//#include +//#include + +#elif defined(CONFIG_SGI_IP35) + +#include +#include +#include +#include + +#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */ + +#if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35) +#include +#include +#include +#if defined(CONFIG_SGI_IP35) +// The hack file has to be before vector and after sn0_fru.... +#include +#include +#include +#endif /* CONFIG_SGI_IP35 */ +#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */ + +typedef u64 nic_t; + +#define KLCFGINFO_MAGIC 0xbeedbabe + +typedef s32 klconf_off_t; + +/* + * Some IMPORTANT OFFSETS. These are the offsets on all NODES. + */ +#define MAX_MODULE_ID 255 +#define SIZE_PAD 4096 /* 4k padding for structures */ +/* + * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets, + * 2 Midplanes assuming no pci card cages + */ +#define MAX_SLOTS_PER_NODE (1 + 2 + 6 + 2) + +/* XXX if each node is guranteed to have some memory */ + +#define MAX_PCI_DEVS 8 + +/* lboard_t->brd_flags fields */ +/* All bits in this field are currently used. Try the pad fields if + you need more flag bits */ + +#define ENABLE_BOARD 0x01 +#define FAILED_BOARD 0x02 +#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which + are discovered twice. Use one of them */ +#define VISITED_BOARD 0x08 /* Used for compact hub numbering. */ +#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */ +#define GLOBAL_MASTER_IO6 0x20 +#define THIRD_NIC_PRESENT 0x40 /* for future use */ +#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */ + +/* klinfo->flags fields */ + +#define KLINFO_ENABLE 0x01 /* This component is enabled */ +#define KLINFO_FAILED 0x02 /* This component failed */ +#define KLINFO_DEVICE 0x04 /* This component is a device */ +#define KLINFO_VISITED 0x08 /* This component has been visited */ +#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */ +#define KLINFO_INSTALL 0x20 /* Install a driver */ +#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */ +#define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL) + +#define GB2 0x80000000 + +#define MAX_RSV_PTRS 32 + +/* Structures to manage various data storage areas */ +/* The numbers must be contiguous since the array index i + is used in the code to allocate various areas. +*/ + +#define BOARD_STRUCT 0 +#define COMPONENT_STRUCT 1 +#define ERRINFO_STRUCT 2 +#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1) +#define DEVICE_STRUCT 3 + + +typedef struct console_s { + unsigned long uart_base; + unsigned long config_base; + unsigned long memory_base; + short baud; + short flag; + int type; + nasid_t nasid; + char wid; + char npci; + nic_t baseio_nic; +} console_t; + +typedef struct klc_malloc_hdr { + klconf_off_t km_base; + klconf_off_t km_limit; + klconf_off_t km_current; +} klc_malloc_hdr_t; + +/* Functions/macros needed to use this structure */ + +typedef struct kl_config_hdr { + u64 ch_magic; /* set this to KLCFGINFO_MAGIC */ + u32 ch_version; /* structure version number */ + klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */ + klconf_off_t ch_cons_off; /* offset of ch_cons */ + klconf_off_t ch_board_info; /* the link list of boards */ + console_t ch_cons_info; /* address info of the console */ + klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX]; + confidence_t ch_sw_belief; /* confidence that software is bad*/ + confidence_t ch_sn0net_belief; /* confidence that sn0net is bad */ +} kl_config_hdr_t; + + +#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) +#define KL_CONFIG_INFO_OFFSET(_nasid) \ + (KL_CONFIG_HDR(_nasid)->ch_board_info) +#define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \ + (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off)) + +#define KL_CONFIG_INFO(_nasid) \ + (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ + NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \ + 0) +#define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic) + +#define KL_CONFIG_CHECK_MAGIC(_nasid) \ + (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC) + +#define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \ + (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC) + +/* --- New Macros for the changed kl_config_hdr_t structure --- */ + +#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ + ((unsigned long)_k + (_k->ch_malloc_hdr_off))) + +#define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n)) + +#define PTR_CH_CONS_INFO(_k) ((console_t *)\ + ((unsigned long)_k + (_k->ch_cons_off))) + +#define KL_CONFIG_CH_CONS_INFO(_n) PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n)) + +/* ------------------------------------------------------------- */ + +#define KL_CONFIG_INFO_START(_nasid) \ + (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t)) + +#define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid) +#define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off)) + +#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD) + +#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB) +#define XBOW_PORT_TYPE_IO(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO) + +#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE) +#define XBOW_PORT_NASID(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid) + +#define XBOW_PORT_IO 0x1 +#define XBOW_PORT_HUB 0x2 +#define XBOW_PORT_ENABLE 0x4 + +#define SN0_PORT_FENCE_SHFT 0 +#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT) + +/* + * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD + * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to + * the LOCAL/current NODE. REMOTE means it is attached to a different + * node.(TBD - Need a way to treat ROUTER boards.) + * + * There are 2 different structures to represent these boards - + * lboard - Local board, rboard - remote board. These 2 structures + * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer + * Figure below). The first byte of the rboard or lboard structure + * is used to find out its type - no unions are used. + * If it is a lboard, then the config info of this board will be found + * on the local node. (LOCAL NODE BASE + offset value gives pointer to + * the structure. + * If it is a rboard, the local structure contains the node number + * and the offset of the beginning of the LINKED LIST on the remote node. + * The details of the hardware on a remote node can be built locally, + * if required, by reading the LINKED LIST on the remote node and + * ignoring all the rboards on that node. + * + * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the + * First board info on the remote node. The remote node list is + * traversed as the local list, using the REMOTE BASE ADDRESS and not + * the local base address and ignoring all rboard values. + * + * + KLCONFIG + + +------------+ +------------+ +------------+ +------------+ + | lboard | +-->| lboard | +-->| rboard | +-->| lboard | + +------------+ | +------------+ | +------------+ | +------------+ + | board info | | | board info | | |errinfo,bptr| | | board info | + +------------+ | +------------+ | +------------+ | +------------+ + | offset |--+ | offset |--+ | offset |--+ |offset=NULL | + +------------+ +------------+ +------------+ +------------+ + + + +------------+ + | board info | + +------------+ +--------------------------------+ + | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) + +------------+ +--------------------------------+ + | compt 2 |--+ + +------------+ | +--------------------------------+ + | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) + +------------+ +--------------------------------+ + | errinfo |--+ + +------------+ | +--------------------------------+ + +--->|r/l brd errinfo,compt err flags | + +--------------------------------+ + + * + * Each BOARD consists of COMPONENTs and the BOARD structure has + * pointers (offsets) to its COMPONENT structure. + * The COMPONENT structure has version info, size and speed info, revision, + * error info and the NIC info. This structure can accommodate any + * BOARD with arbitrary COMPONENT composition. + * + * The ERRORINFO part of each BOARD has error information + * that describes errors about the BOARD itself. It also has flags to + * indicate the COMPONENT(s) on the board that have errors. The error + * information specific to the COMPONENT is present in the respective + * COMPONENT structure. + * + * The ERRORINFO structure is also treated like a COMPONENT, ie. the + * BOARD has pointers(offset) to the ERRORINFO structure. The rboard + * structure also has a pointer to the ERRORINFO structure. This is + * the place to store ERRORINFO about a REMOTE NODE, if the HUB on + * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where + * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can + * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info + * which is present on the REMOTE NODE.(TBD) + * REMOTE ERRINFO can be stored on any of the nearest nodes + * or on all the nearest nodes.(TBD) + * Like BOARD structures, REMOTE ERRINFO structures can be built locally + * using the rboard errinfo pointer. + * + * In order to get useful information from this Data organization, a set of + * interface routines are provided (TBD). The important thing to remember while + * manipulating the structures, is that, the NODE number information should + * be used. If the NODE is non-zero (remote) then each offset should + * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. + * This includes offsets for BOARDS, COMPONENTS and ERRORINFO. + * + * Note that these structures do not provide much info about connectivity. + * That info will be part of HWGRAPH, which is an extension of the cfg_t + * data structure. (ref IP27prom/cfg.h) It has to be extended to include + * the IO part of the Network(TBD). + * + * The data structures below define the above concepts. + */ + +/* + * Values for CPU types + */ +#define KL_CPU_R4000 0x1 /* Standard R4000 */ +#define KL_CPU_TFP 0x2 /* TFP processor */ +#define KL_CPU_R10000 0x3 /* R10000 (T5) */ +#define KL_CPU_NONE (-1) /* no cpu present in slot */ + +/* + * IP27 BOARD classes + */ + +#define KLCLASS_MASK 0xf0 +#define KLCLASS_NONE 0x00 +#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ +#define KLCLASS_CPU KLCLASS_NODE +#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI + and the non-graphics widget boards */ +#define KLCLASS_ROUTER 0x30 /* Router board */ +#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board + so that we can record error info */ +#define KLCLASS_GFX 0x50 /* graphics boards */ + +#define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx + * hw ifc to xtalk and are not gfx + * class for sw purposes */ + +#define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */ +#define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */ + +#define KLCLASS_UNKNOWN 0xf0 + +#define KLCLASS(_x) ((_x) & KLCLASS_MASK) + +/* + * IP27 board types + */ + +#define KLTYPE_MASK 0x0f +#define KLTYPE_NONE 0x00 +#define KLTYPE_EMPTY 0x00 + +#define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0) +#define KLTYPE_IP27 (KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */ + +#define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0) +#define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */ +#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */ +#define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2) +#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */ +#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3) +#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */ +#define KLTYPE_FDDI (KLCLASS_IO | 0x4) +#define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */ +#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */ +#define KLTYPE_PCI KLTYPE_HAROLD +#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */ +#define KLTYPE_MIO (KLCLASS_IO | 0x8) +#define KLTYPE_FC (KLCLASS_IO | 0x9) +#define KLTYPE_LINC (KLCLASS_IO | 0xA) +#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */ +#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */ +#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */ + +#define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */ +#define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */ +#define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */ + +#define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0) +#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) +#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */ +#define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2) +#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) + +#define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0) +#define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */ +#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8 +#define KLTYPE_PBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) + +#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) +#define KLTYPE_IBRICK (KLCLASS_IOBRICK | 0x1) +#define KLTYPE_PBRICK (KLCLASS_IOBRICK | 0x2) +#define KLTYPE_XBRICK (KLCLASS_IOBRICK | 0x3) + +#define KLTYPE_PBRICK_BRIDGE KLTYPE_PBRICK + +/* The value of type should be more than 8 so that hinv prints + * out the board name from the NIC string. For values less than + * 8 the name of the board needs to be hard coded in a few places. + * When bringup started nic names had not standardized and so we + * had to hard code. (For people interested in history.) + */ +#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9) + +#define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf) + +#define KLTYPE(_x) ((_x) & KLTYPE_MASK) +#define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \ + (l->brd_flags & SECOND_NIC_PRESENT)) +#define IS_MIO_IOC3(l, n) (IS_MIO_PRESENT(l) && (n > 2)) + +/* + * board structures + */ + +#define MAX_COMPTS_PER_BRD 24 + +#define LOCAL_BOARD 1 +#define REMOTE_BOARD 2 + +#define LBOARD_STRUCT_VERSION 2 + +typedef struct lboard_s { + klconf_off_t brd_next; /* Next BOARD */ + unsigned char struct_type; /* type of structure, local or remote */ + unsigned char brd_type; /* type+class */ + unsigned char brd_sversion; /* version of this structure */ + unsigned char brd_brevision; /* board revision */ + unsigned char brd_promver; /* board prom version, if any */ + unsigned char brd_flags; /* Enabled, Disabled etc */ + unsigned char brd_slot; /* slot number */ + unsigned short brd_debugsw; /* Debug switches */ + moduleid_t brd_module; /* module to which it belongs */ + partid_t brd_partition; /* Partition number */ + unsigned short brd_diagval; /* diagnostic value */ + unsigned short brd_diagparm; /* diagnostic parameter */ + unsigned char brd_inventory; /* inventory history */ + unsigned char brd_numcompts; /* Number of components */ + nic_t brd_nic; /* Number in CAN */ + nasid_t brd_nasid; /* passed parameter */ + klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ + klconf_off_t brd_errinfo; /* Board's error information */ + struct lboard_s *brd_parent; /* Logical parent for this brd */ + vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */ + confidence_t brd_confidence; /* confidence that the board is bad */ + nasid_t brd_owner; /* who owns this board */ + unsigned char brd_nic_flags; /* To handle 8 more NICs */ + char brd_name[32]; +} lboard_t; + + +/* + * Make sure we pass back the calias space address for local boards. + * klconfig board traversal and error structure extraction defines. + */ + +#define BOARD_SLOT(_brd) ((_brd)->brd_slot) + +#define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type) +#define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type) +#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1) +#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) +#define KLCF_MODULE_ID(_brd) ((_brd)->brd_module) + +#define KLCF_NEXT(_brd) \ + ((_brd)->brd_next ? \ + (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\ + NULL) +#define KLCF_COMP(_brd, _ndx) \ + (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \ + (_brd)->brd_compts[(_ndx)])) + +#define KLCF_COMP_ERROR(_brd, _comp) \ + (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) + +#define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type) +#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ + + + +/* + * Generic info structure. This stores common info about a + * component. + */ + +typedef struct klinfo_s { /* Generic info */ + unsigned char struct_type; /* type of this structure */ + unsigned char struct_version; /* version of this structure */ + unsigned char flags; /* Enabled, disabled etc */ + unsigned char revision; /* component revision */ + unsigned short diagval; /* result of diagnostics */ + unsigned short diagparm; /* diagnostic parameter */ + unsigned char inventory; /* previous inventory status */ + nic_t nic; /* MUst be aligned properly */ + unsigned char physid; /* physical id of component */ + unsigned int virtid; /* virtual id as seen by system */ + unsigned char widid; /* Widget id - if applicable */ + nasid_t nasid; /* node number - from parent */ + char pad1; /* pad out structure. */ + char pad2; /* pad out structure. */ + COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/ + klconf_off_t errinfo; /* component specific errors */ + unsigned short pad3; /* pci fields have moved over to */ + unsigned short pad4; /* klbri_t */ +} klinfo_t ; + +#define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE) +/* + * Component structures. + * Following are the currently identified components: + * CPU, HUB, MEM_BANK, + * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE) + * BRIDGE, IOC3, SuperIO, SCSI, FDDI + * ROUTER + * GRAPHICS + */ +#define KLSTRUCT_UNKNOWN 0 +#define KLSTRUCT_CPU 1 +#define KLSTRUCT_HUB 2 +#define KLSTRUCT_MEMBNK 3 +#define KLSTRUCT_XBOW 4 +#define KLSTRUCT_BRI 5 +#define KLSTRUCT_IOC3 6 +#define KLSTRUCT_PCI 7 +#define KLSTRUCT_VME 8 +#define KLSTRUCT_ROU 9 +#define KLSTRUCT_GFX 10 +#define KLSTRUCT_SCSI 11 +#define KLSTRUCT_FDDI 12 +#define KLSTRUCT_MIO 13 +#define KLSTRUCT_DISK 14 +#define KLSTRUCT_TAPE 15 +#define KLSTRUCT_CDROM 16 +#define KLSTRUCT_HUB_UART 17 +#define KLSTRUCT_IOC3ENET 18 +#define KLSTRUCT_IOC3UART 19 +#define KLSTRUCT_UNUSED 20 /* XXX UNUSED */ +#define KLSTRUCT_IOC3PCKM 21 +#define KLSTRUCT_RAD 22 +#define KLSTRUCT_HUB_TTY 23 +#define KLSTRUCT_IOC3_TTY 24 + +/* Early Access IO proms are compatible + only with KLSTRUCT values upto 24. */ + +#define KLSTRUCT_FIBERCHANNEL 25 +#define KLSTRUCT_MOD_SERIAL_NUM 26 +#define KLSTRUCT_IOC3MS 27 +#define KLSTRUCT_TPU 28 +#define KLSTRUCT_GSN_A 29 +#define KLSTRUCT_GSN_B 30 +#define KLSTRUCT_XTHD 31 + +/* + * These are the indices of various components within a lboard structure. + */ + +#define IP27_CPU0_INDEX 0 +#define IP27_CPU1_INDEX 1 +#define IP27_HUB_INDEX 2 +#define IP27_MEM_INDEX 3 + +#define BASEIO_BRIDGE_INDEX 0 +#define BASEIO_IOC3_INDEX 1 +#define BASEIO_SCSI1_INDEX 2 +#define BASEIO_SCSI2_INDEX 3 + +#define MIDPLANE_XBOW_INDEX 0 +#define ROUTER_COMPONENT_INDEX 0 + +#define CH4SCSI_BRIDGE_INDEX 0 + +/* Info holders for various hardware components */ + +typedef u64 *pci_t; +typedef u64 *vmeb_t; +typedef u64 *vmed_t; +typedef u64 *fddi_t; +typedef u64 *scsi_t; +typedef u64 *mio_t; +typedef u64 *graphics_t; +typedef u64 *router_t; + +/* + * The port info in ip27_cfg area translates to a lboart_t in the + * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t + * is stored in terms of a nasid and a offset from start of KLCONFIG + * area on that nasid. + */ +typedef struct klport_s { + nasid_t port_nasid; + unsigned char port_flag; + klconf_off_t port_offset; +} klport_t; + +typedef struct klcpu_s { /* CPU */ + klinfo_t cpu_info; + unsigned short cpu_prid; /* Processor PRID value */ + unsigned short cpu_fpirr; /* FPU IRR value */ + unsigned short cpu_speed; /* Speed in MHZ */ + unsigned short cpu_scachesz; /* secondary cache size in MB */ + unsigned short cpu_scachespeed;/* secondary cache speed in MHz */ +} klcpu_t ; + +#define CPU_STRUCT_VERSION 2 + +typedef struct klhub_s { /* HUB */ + klinfo_t hub_info; + unsigned int hub_flags; /* PCFG_HUB_xxx flags */ + klport_t hub_port; /* hub is connected to this */ + nic_t hub_box_nic; /* nic of containing box */ + klconf_off_t hub_mfg_nic; /* MFG NIC string */ + u64 hub_speed; /* Speed of hub in HZ */ +} klhub_t ; + +typedef struct klhub_uart_s { /* HUB */ + klinfo_t hubuart_info; + unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */ + nic_t hubuart_box_nic; /* nic of containing box */ +} klhub_uart_t ; + +#define MEMORY_STRUCT_VERSION 2 + +typedef struct klmembnk_s { /* MEMORY BANK */ + klinfo_t membnk_info; + short membnk_memsz; /* Total memory in megabytes */ + short membnk_dimm_select; /* bank to physical addr mapping*/ + short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */ + short membnk_attr; +} klmembnk_t ; + +#define KLCONFIG_MEMBNK_SIZE(_info, _bank) \ + ((_info)->membnk_bnksz[(_bank)]) + + +#define MEMBNK_PREMIUM 1 +#define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \ + ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank))) + +#define MAX_SERIAL_NUM_SIZE 10 + +typedef struct klmod_serial_num_s { + klinfo_t snum_info; + union { + char snum_str[MAX_SERIAL_NUM_SIZE]; + unsigned long long snum_int; + } snum; +} klmod_serial_num_t; + +/* Macros needed to access serial number structure in lboard_t. + Hard coded values are necessary since we cannot treat + serial number struct as a component without losing compatibility + between prom versions. */ + +#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\ + KLCF_COMP(_l, _l->brd_numcompts)) + +#define MAX_XBOW_LINKS 16 + +typedef struct klxbow_s { /* XBOW */ + klinfo_t xbow_info ; + klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */ + int xbow_master_hub_link; + /* type of brd connected+component struct ptr+flags */ +} klxbow_t ; + +#define MAX_PCI_SLOTS 8 + +typedef struct klpci_device_s { + s32 pci_device_id; /* 32 bits of vendor/device ID. */ + s32 pci_device_pad; /* 32 bits of padding. */ +} klpci_device_t; + +#define BRIDGE_STRUCT_VERSION 2 + +typedef struct klbri_s { /* BRIDGE */ + klinfo_t bri_info ; + unsigned char bri_eprominfo ; /* IO6prom connected to bridge */ + unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */ + pci_t pci_specific ; /* PCI Board config info */ + klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */ + klconf_off_t bri_mfg_nic ; +} klbri_t ; + +#define MAX_IOC3_TTY 2 + +typedef struct klioc3_s { /* IOC3 */ + klinfo_t ioc3_info ; + unsigned char ioc3_ssram ; /* Info about ssram */ + unsigned char ioc3_nvram ; /* Info about nvram */ + klinfo_t ioc3_superio ; /* Info about superio */ + klconf_off_t ioc3_tty_off ; + klinfo_t ioc3_enet ; + klconf_off_t ioc3_enet_off ; + klconf_off_t ioc3_kbd_off ; +} klioc3_t ; + +#define MAX_VME_SLOTS 8 + +typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */ + klinfo_t vmeb_info ; + vmeb_t vmeb_specific ; + klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ +} klvmeb_t ; + +typedef struct klvmed_s { /* VME DEVICE - VME BOARD */ + klinfo_t vmed_info ; + vmed_t vmed_specific ; + klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ +} klvmed_t ; + +#define ROUTER_VECTOR_VERS 2 + +/* XXX - Don't we need the number of ports here?!? */ +typedef struct klrou_s { /* ROUTER */ + klinfo_t rou_info ; + unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */ + nic_t rou_box_nic ; /* nic of the containing module */ + klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */ + klconf_off_t rou_mfg_nic ; /* MFG NIC string */ + u64 rou_vector; /* vector from master node */ +} klrou_t ; + +/* + * Graphics Controller/Device + * + * (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier + * used a couple different structures to store graphics information. + * For compatibility reasons, the newer data structure preserves some + * of the layout so that fields that are used in the old versions remain + * in the same place (with the same info). Determination of what version + * of this structure we have is done by checking the cookie field. + */ +#define KLGFX_COOKIE 0x0c0de000 + +typedef struct klgfx_s { /* GRAPHICS Device */ + klinfo_t gfx_info; + klconf_off_t old_gndevs; /* for compatibility with older proms */ + klconf_off_t old_gdoff0; /* for compatibility with older proms */ + unsigned int cookie; /* for compatibility with older proms */ + unsigned int moduleslot; + struct klgfx_s *gfx_next_pipe; + graphics_t gfx_specific; + klconf_off_t pad0; /* for compatibility with older proms */ + klconf_off_t gfx_mfg_nic; +} klgfx_t; + +typedef struct klxthd_s { + klinfo_t xthd_info ; + klconf_off_t xthd_mfg_nic ; /* MFG NIC string */ +} klxthd_t ; + +typedef struct kltpu_s { /* TPU board */ + klinfo_t tpu_info ; + klconf_off_t tpu_mfg_nic ; /* MFG NIC string */ +} kltpu_t ; + +typedef struct klgsn_s { /* GSN board */ + klinfo_t gsn_info ; + klconf_off_t gsn_mfg_nic ; /* MFG NIC string */ +} klgsn_t ; + +#define MAX_SCSI_DEVS 16 + +/* + * NOTE: THis is the max sized kl* structure and is used in klmalloc.c + * to allocate space of type COMPONENT. Make sure that if the size of + * any other component struct becomes more than this, then redefine + * that as the size to be klmalloced. + */ + +typedef struct klscsi_s { /* SCSI Controller */ + klinfo_t scsi_info ; + scsi_t scsi_specific ; + unsigned char scsi_numdevs ; + klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ; +} klscsi_t ; + +typedef struct klscdev_s { /* SCSI device */ + klinfo_t scdev_info ; + struct scsidisk_data *scdev_cfg ; /* driver fills up this */ +} klscdev_t ; + +typedef struct klttydev_s { /* TTY device */ + klinfo_t ttydev_info ; + struct terminal_data *ttydev_cfg ; /* driver fills up this */ +} klttydev_t ; + +typedef struct klenetdev_s { /* ENET device */ + klinfo_t enetdev_info ; + struct net_data *enetdev_cfg ; /* driver fills up this */ +} klenetdev_t ; + +typedef struct klkbddev_s { /* KBD device */ + klinfo_t kbddev_info ; + struct keyboard_data *kbddev_cfg ; /* driver fills up this */ +} klkbddev_t ; + +typedef struct klmsdev_s { /* mouse device */ + klinfo_t msdev_info ; + void *msdev_cfg ; +} klmsdev_t ; + +#define MAX_FDDI_DEVS 10 /* XXX Is this true */ + +typedef struct klfddi_s { /* FDDI */ + klinfo_t fddi_info ; + fddi_t fddi_specific ; + klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ; +} klfddi_t ; + +typedef struct klmio_s { /* MIO */ + klinfo_t mio_info ; + mio_t mio_specific ; +} klmio_t ; + + +typedef union klcomp_s { + klcpu_t kc_cpu; + klhub_t kc_hub; + klmembnk_t kc_mem; + klxbow_t kc_xbow; + klbri_t kc_bri; + klioc3_t kc_ioc3; + klvmeb_t kc_vmeb; + klvmed_t kc_vmed; + klrou_t kc_rou; + klgfx_t kc_gfx; + klscsi_t kc_scsi; + klscdev_t kc_scsi_dev; + klfddi_t kc_fddi; + klmio_t kc_mio; + klmod_serial_num_t kc_snum ; +} klcomp_t; + +typedef union kldev_s { /* for device structure allocation */ + klscdev_t kc_scsi_dev ; + klttydev_t kc_tty_dev ; + klenetdev_t kc_enet_dev ; + klkbddev_t kc_kbd_dev ; +} kldev_t ; + +/* Data structure interface routines. TBD */ + +/* Include launch info in this file itself? TBD */ + +/* + * TBD - Can the ARCS and device driver related info also be included in the + * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t + * structure, viz private to the IO4prom. + */ + +/* + * TBD - Allocation issues. + * + * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component, + * errinfo and allocate from them, or have a single heap and allocate all + * structures from it. Debug is easier in the former method since we can + * dump all similar structs in one command, but there will be lots of holes, + * in memory and max limits are needed for number of structures. + * Another way to make it organized, is to have a union of all components + * and allocate a aligned chunk of memory greater than the biggest + * component. + */ + +typedef union { + lboard_t *lbinfo ; +} biptr_t ; + + +#define BRI_PER_XBOW 6 +#define PCI_PER_BRI 8 +#define DEV_PER_PCI 16 + + +/* Virtual dipswitch values (starting from switch "7"): */ + +#define VDS_NOGFX 0x8000 /* Don't enable gfx and autoboot */ +#define VDS_NOMP 0x100 /* Don't start slave processors */ +#define VDS_MANUMODE 0x80 /* Manufacturing mode */ +#define VDS_NOARB 0x40 /* No bootmaster arbitration */ +#define VDS_PODMODE 0x20 /* Go straight to POD mode */ +#define VDS_NO_DIAGS 0x10 /* Don't run any diags after BM arb */ +#define VDS_DEFAULTS 0x08 /* Use default environment values */ +#define VDS_NOMEMCLEAR 0x04 /* Don't run mem cfg code */ +#define VDS_2ND_IO4 0x02 /* Boot from the second IO4 */ +#define VDS_DEBUG_PROM 0x01 /* Print PROM debugging messages */ + +/* external declarations of Linux kernel functions. */ + +extern lboard_t *find_lboard(lboard_t *start, unsigned char type); +extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type); +extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type); +extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int); +extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class); + + +extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu); + +#endif /* _ASM_SN_KLCONFIG_H */ diff --git a/arch/mips/include/asm/sn/kldir.h b/arch/mips/include/asm/sn/kldir.h new file mode 100644 index 000000000000..1327e12e9645 --- /dev/null +++ b/arch/mips/include/asm/sn/kldir.h @@ -0,0 +1,217 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX , revision 1.21. + * + * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 1999, 2000 by Ralf Baechle + */ +#ifndef _ASM_SN_KLDIR_H +#define _ASM_SN_KLDIR_H + + +/* + * The kldir memory area resides at a fixed place in each node's memory and + * provides pointers to most other IP27 memory areas. This allows us to + * resize and/or relocate memory areas at a later time without breaking all + * firmware and kernels that use them. Indices in the array are + * permanently dedicated to areas listed below. Some memory areas (marked + * below) reside at a permanently fixed location, but are included in the + * directory for completeness. + */ + +#define KLDIR_MAGIC 0x434d5f53505f5357 + +/* + * The upper portion of the memory map applies during boot + * only and is overwritten by IRIX/SYMMON. + * + * MEMORY MAP PER NODE + * + * 0x2000000 (32M) +-----------------------------------------+ + * | IO6 BUFFERS FOR FLASH ENET IOC3 | + * 0x1F80000 (31.5M) +-----------------------------------------+ + * | IO6 TEXT/DATA/BSS/stack | + * 0x1C00000 (30M) +-----------------------------------------+ + * | IO6 PROM DEBUG TEXT/DATA/BSS/stack | + * 0x0800000 (28M) +-----------------------------------------+ + * | IP27 PROM TEXT/DATA/BSS/stack | + * 0x1B00000 (27M) +-----------------------------------------+ + * | IP27 CFG | + * 0x1A00000 (26M) +-----------------------------------------+ + * | Graphics PROM | + * 0x1800000 (24M) +-----------------------------------------+ + * | 3rd Party PROM drivers | + * 0x1600000 (22M) +-----------------------------------------+ + * | | + * | Free | + * | | + * +-----------------------------------------+ + * | UNIX DEBUG Version | + * 0x190000 (2M--) +-----------------------------------------+ + * | SYMMON | + * | (For UNIX Debug only) | + * 0x34000 (208K) +-----------------------------------------+ + * | SYMMON STACK [NUM_CPU_PER_NODE] | + * | (For UNIX Debug only) | + * 0x25000 (148K) +-----------------------------------------+ + * | KLCONFIG - II (temp) | + * | | + * | ---------------------------- | + * | | + * | UNIX NON-DEBUG Version | + * 0x19000 (100K) +-----------------------------------------+ + * + * + * The lower portion of the memory map contains information that is + * permanent and is used by the IP27PROM, IO6PROM and IRIX. + * + * 0x19000 (100K) +-----------------------------------------+ + * | | + * | PI Error Spools (32K) | + * | | + * 0x12000 (72K) +-----------------------------------------+ + * | Unused | + * 0x11c00 (71K) +-----------------------------------------+ + * | CPU 1 NMI Eframe area | + * 0x11a00 (70.5K) +-----------------------------------------+ + * | CPU 0 NMI Eframe area | + * 0x11800 (70K) +-----------------------------------------+ + * | CPU 1 NMI Register save area | + * 0x11600 (69.5K) +-----------------------------------------+ + * | CPU 0 NMI Register save area | + * 0x11400 (69K) +-----------------------------------------+ + * | GDA (1k) | + * 0x11000 (68K) +-----------------------------------------+ + * | Early cache Exception stack | + * | and/or | + * | kernel/io6prom nmi registers | + * 0x10800 (66k) +-----------------------------------------+ + * | cache error eframe | + * 0x10400 (65K) +-----------------------------------------+ + * | Exception Handlers (UALIAS copy) | + * 0x10000 (64K) +-----------------------------------------+ + * | | + * | | + * | KLCONFIG - I (permanent) (48K) | + * | | + * | | + * | | + * 0x4000 (16K) +-----------------------------------------+ + * | NMI Handler (Protected Page) | + * 0x3000 (12K) +-----------------------------------------+ + * | ARCS PVECTORS (master node only) | + * 0x2c00 (11K) +-----------------------------------------+ + * | ARCS TVECTORS (master node only) | + * 0x2800 (10K) +-----------------------------------------+ + * | LAUNCH [NUM_CPU] | + * 0x2400 (9K) +-----------------------------------------+ + * | Low memory directory (KLDIR) | + * 0x2000 (8K) +-----------------------------------------+ + * | ARCS SPB (1K) | + * 0x1000 (4K) +-----------------------------------------+ + * | Early cache Exception stack | + * | and/or | + * | kernel/io6prom nmi registers | + * 0x800 (2k) +-----------------------------------------+ + * | cache error eframe | + * 0x400 (1K) +-----------------------------------------+ + * | Exception Handlers | + * 0x0 (0K) +-----------------------------------------+ + */ + +#ifdef __ASSEMBLY__ +#define KLDIR_OFF_MAGIC 0x00 +#define KLDIR_OFF_OFFSET 0x08 +#define KLDIR_OFF_POINTER 0x10 +#define KLDIR_OFF_SIZE 0x18 +#define KLDIR_OFF_COUNT 0x20 +#define KLDIR_OFF_STRIDE 0x28 +#endif /* __ASSEMBLY__ */ + +/* + * This is defined here because IP27_SYMMON_STK_SIZE must be at least what + * we define here. Since it's set up in the prom. We can't redefine it later + * and expect more space to be allocated. The way to find out the true size + * of the symmon stacks is to divide SYMMON_STK_SIZE by SYMMON_STK_STRIDE + * for a particular node. + */ +#define SYMMON_STACK_SIZE 0x8000 + +#if defined(PROM) + +/* + * These defines are prom version dependent. No code other than the IP27 + * prom should attempt to use these values. + */ +#define IP27_LAUNCH_OFFSET 0x2400 +#define IP27_LAUNCH_SIZE 0x400 +#define IP27_LAUNCH_COUNT 2 +#define IP27_LAUNCH_STRIDE 0x200 + +#define IP27_KLCONFIG_OFFSET 0x4000 +#define IP27_KLCONFIG_SIZE 0xc000 +#define IP27_KLCONFIG_COUNT 1 +#define IP27_KLCONFIG_STRIDE 0 + +#define IP27_NMI_OFFSET 0x3000 +#define IP27_NMI_SIZE 0x40 +#define IP27_NMI_COUNT 2 +#define IP27_NMI_STRIDE 0x40 + +#define IP27_PI_ERROR_OFFSET 0x12000 +#define IP27_PI_ERROR_SIZE 0x4000 +#define IP27_PI_ERROR_COUNT 1 +#define IP27_PI_ERROR_STRIDE 0 + +#define IP27_SYMMON_STK_OFFSET 0x25000 +#define IP27_SYMMON_STK_SIZE 0xe000 +#define IP27_SYMMON_STK_COUNT 2 +/* IP27_SYMMON_STK_STRIDE must be >= SYMMON_STACK_SIZE */ +#define IP27_SYMMON_STK_STRIDE 0x7000 + +#define IP27_FREEMEM_OFFSET 0x19000 +#define IP27_FREEMEM_SIZE -1 +#define IP27_FREEMEM_COUNT 1 +#define IP27_FREEMEM_STRIDE 0 + +#endif /* PROM */ +/* + * There will be only one of these in a partition so the IO6 must set it up. + */ +#define IO6_GDA_OFFSET 0x11000 +#define IO6_GDA_SIZE 0x400 +#define IO6_GDA_COUNT 1 +#define IO6_GDA_STRIDE 0 + +/* + * save area of kernel nmi regs in the prom format + */ +#define IP27_NMI_KREGS_OFFSET 0x11400 +#define IP27_NMI_KREGS_CPU_SIZE 0x200 +/* + * save area of kernel nmi regs in eframe format + */ +#define IP27_NMI_EFRAME_OFFSET 0x11800 +#define IP27_NMI_EFRAME_SIZE 0x200 + +#define KLDIR_ENT_SIZE 0x40 +#define KLDIR_MAX_ENTRIES (0x400 / 0x40) + +#ifndef __ASSEMBLY__ +typedef struct kldir_ent_s { + u64 magic; /* Indicates validity of entry */ + off_t offset; /* Offset from start of node space */ + unsigned long pointer; /* Pointer to area in some cases */ + size_t size; /* Size in bytes */ + u64 count; /* Repeat count if array, 1 if not */ + size_t stride; /* Stride if array, 0 if not */ + char rsvd[16]; /* Pad entry to 0x40 bytes */ + /* NOTE: These 16 bytes are used in the Partition KLDIR + entry to store partition info. Refer to klpart.h for this. */ +} kldir_ent_t; +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_SN_KLDIR_H */ diff --git a/arch/mips/include/asm/sn/klkernvars.h b/arch/mips/include/asm/sn/klkernvars.h new file mode 100644 index 000000000000..5de4c5e8ab30 --- /dev/null +++ b/arch/mips/include/asm/sn/klkernvars.h @@ -0,0 +1,29 @@ +/* + * File ported from IRIX to Linux by Kanoj Sarcar, 06/08/00. + * Copyright 2000 Silicon Graphics, Inc. + */ +#ifndef __ASM_SN_KLKERNVARS_H +#define __ASM_SN_KLKERNVARS_H + +#define KV_MAGIC_OFFSET 0x0 +#define KV_RO_NASID_OFFSET 0x4 +#define KV_RW_NASID_OFFSET 0x6 + +#define KV_MAGIC 0x5f4b565f + +#ifndef __ASSEMBLY__ + +#include + +typedef struct kern_vars_s { + int kv_magic; + nasid_t kv_ro_nasid; + nasid_t kv_rw_nasid; + unsigned long kv_ro_baseaddr; + unsigned long kv_rw_baseaddr; +} kern_vars_t; + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_SN_KLKERNVARS_H */ + diff --git a/arch/mips/include/asm/sn/launch.h b/arch/mips/include/asm/sn/launch.h new file mode 100644 index 000000000000..b7c2226312c6 --- /dev/null +++ b/arch/mips/include/asm/sn/launch.h @@ -0,0 +1,106 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc. + * Copyright (C) 2000 by Colin Ngam + */ +#ifndef _ASM_SN_LAUNCH_H +#define _ASM_SN_LAUNCH_H + +#include +#include + +/* + * The launch data structure resides at a fixed place in each node's memory + * and is used to communicate between the master processor and the slave + * processors. + * + * The master stores launch parameters in the launch structure + * corresponding to a target processor that is in a slave loop, then sends + * an interrupt to the slave processor. The slave calls the desired + * function, then returns to the slave loop. The master may poll or wait + * for the slaves to finish. + * + * There is an array of launch structures, one per CPU on the node. One + * interrupt level is used per local CPU. + */ + +#define LAUNCH_MAGIC 0xaddbead2addbead3 +#ifdef CONFIG_SGI_IP27 +#define LAUNCH_SIZEOF 0x100 +#define LAUNCH_PADSZ 0xa0 +#endif + +#define LAUNCH_OFF_MAGIC 0x00 /* Struct offsets for assembly */ +#define LAUNCH_OFF_BUSY 0x08 +#define LAUNCH_OFF_CALL 0x10 +#define LAUNCH_OFF_CALLC 0x18 +#define LAUNCH_OFF_CALLPARM 0x20 +#define LAUNCH_OFF_STACK 0x28 +#define LAUNCH_OFF_GP 0x30 +#define LAUNCH_OFF_BEVUTLB 0x38 +#define LAUNCH_OFF_BEVNORMAL 0x40 +#define LAUNCH_OFF_BEVECC 0x48 + +#define LAUNCH_STATE_DONE 0 /* Return value of LAUNCH_POLL */ +#define LAUNCH_STATE_SENT 1 +#define LAUNCH_STATE_RECD 2 + +/* + * The launch routine is called only if the complement address is correct. + * + * Before control is transferred to a routine, the complement address + * is zeroed (invalidated) to prevent an accidental call from a spurious + * interrupt. + * + * The slave_launch routine turns on the BUSY flag, and the slave loop + * clears the BUSY flag after control is returned to it. + */ + +#ifndef __ASSEMBLY__ + +typedef int launch_state_t; +typedef void (*launch_proc_t)(u64 call_parm); + +typedef struct launch_s { + volatile u64 magic; /* Magic number */ + volatile u64 busy; /* Slave currently active */ + volatile launch_proc_t call_addr; /* Func. for slave to call */ + volatile u64 call_addr_c; /* 1's complement of call_addr*/ + volatile u64 call_parm; /* Single parm passed to call*/ + volatile void *stack_addr; /* Stack pointer for slave function */ + volatile void *gp_addr; /* Global pointer for slave func. */ + volatile char *bevutlb;/* Address of bev utlb ex handler */ + volatile char *bevnormal;/*Address of bev normal ex handler */ + volatile char *bevecc;/* Address of bev cache err handler */ + volatile char pad[160]; /* Pad to LAUNCH_SIZEOF */ +} launch_t; + +/* + * PROM entry points for launch routines are determined by IPxxprom/start.s + */ + +#define LAUNCH_SLAVE (*(void (*)(int nasid, int cpu, \ + launch_proc_t call_addr, \ + u64 call_parm, \ + void *stack_addr, \ + void *gp_addr)) \ + IP27PROM_LAUNCHSLAVE) + +#define LAUNCH_WAIT (*(void (*)(int nasid, int cpu, int timeout_msec)) \ + IP27PROM_WAITSLAVE) + +#define LAUNCH_POLL (*(launch_state_t (*)(int nasid, int cpu)) \ + IP27PROM_POLLSLAVE) + +#define LAUNCH_LOOP (*(void (*)(void)) \ + IP27PROM_SLAVELOOP) + +#define LAUNCH_FLASH (*(void (*)(void)) \ + IP27PROM_FLASHLEDS) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_SN_LAUNCH_H */ diff --git a/arch/mips/include/asm/sn/mapped_kernel.h b/arch/mips/include/asm/sn/mapped_kernel.h new file mode 100644 index 000000000000..721496a0bb92 --- /dev/null +++ b/arch/mips/include/asm/sn/mapped_kernel.h @@ -0,0 +1,54 @@ +/* + * File created by Kanoj Sarcar 06/06/00. + * Copyright 2000 Silicon Graphics, Inc. + */ +#ifndef __ASM_SN_MAPPED_KERNEL_H +#define __ASM_SN_MAPPED_KERNEL_H + +#include + +/* + * Note on how mapped kernels work: the text and data section is + * compiled at cksseg segment (LOADADDR = 0xc001c000), and the + * init/setup/data section gets a 16M virtual address bump in the + * ld.script file (so that tlblo0 and tlblo1 maps the sections). + * The vmlinux.64 section addresses are put in the xkseg range + * using the change-addresses makefile option. Use elfdump -of + * on IRIX to see where the sections go. The Origin loader loads + * the two sections contiguously in physical memory. The loader + * sets the entry point into kernel_entry using a xkphys address, + * but instead of using 0xa800000001160000, it uses the address + * 0xa800000000160000, which is where it physically loaded that + * code. So no jumps can be done before we have switched to using + * cksseg addresses. + */ +#include + +#define REP_BASE CAC_BASE + +#ifdef CONFIG_MAPPED_KERNEL + +#define MAPPED_ADDR_RO_TO_PHYS(x) (x - REP_BASE) +#define MAPPED_ADDR_RW_TO_PHYS(x) (x - REP_BASE - 16777216) + +#define MAPPED_KERN_RO_PHYSBASE(n) (hub_data(n)->kern_vars.kv_ro_baseaddr) +#define MAPPED_KERN_RW_PHYSBASE(n) (hub_data(n)->kern_vars.kv_rw_baseaddr) + +#define MAPPED_KERN_RO_TO_PHYS(x) \ + ((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \ + MAPPED_KERN_RO_PHYSBASE(get_compact_nodeid())) +#define MAPPED_KERN_RW_TO_PHYS(x) \ + ((unsigned long)MAPPED_ADDR_RW_TO_PHYS(x) | \ + MAPPED_KERN_RW_PHYSBASE(get_compact_nodeid())) + +#else /* CONFIG_MAPPED_KERNEL */ + +#define MAPPED_KERN_RO_TO_PHYS(x) (x - REP_BASE) +#define MAPPED_KERN_RW_TO_PHYS(x) (x - REP_BASE) + +#endif /* CONFIG_MAPPED_KERNEL */ + +#define MAPPED_KERN_RO_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x)) +#define MAPPED_KERN_RW_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x)) + +#endif /* __ASM_SN_MAPPED_KERNEL_H */ diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h new file mode 100644 index 000000000000..6b7b0b5f3729 --- /dev/null +++ b/arch/mips/include/asm/sn/nmi.h @@ -0,0 +1,125 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997 Silicon Graphics, Inc. + */ +#ifndef __ASM_SN_NMI_H +#define __ASM_SN_NMI_H + +#ident "$Revision: 1.5 $" + +#include + +/* + * The launch data structure resides at a fixed place in each node's memory + * and is used to communicate between the master processor and the slave + * processors. + * + * The master stores launch parameters in the launch structure + * corresponding to a target processor that is in a slave loop, then sends + * an interrupt to the slave processor. The slave calls the desired + * function, followed by an optional rendezvous function, then returns to + * the slave loop. The master does not wait for the slaves before + * returning. + * + * There is an array of launch structures, one per CPU on the node. One + * interrupt level is used per CPU. + */ + +#define NMI_MAGIC 0x48414d4d455201 +#define NMI_SIZEOF 0x40 + +#define NMI_OFF_MAGIC 0x00 /* Struct offsets for assembly */ +#define NMI_OFF_FLAGS 0x08 +#define NMI_OFF_CALL 0x10 +#define NMI_OFF_CALLC 0x18 +#define NMI_OFF_CALLPARM 0x20 +#define NMI_OFF_GMASTER 0x28 + +/* + * The NMI routine is called only if the complement address is + * correct. + * + * Before control is transferred to a routine, the complement address + * is zeroed (invalidated) to prevent an accidental call from a spurious + * interrupt. + * + */ + +#ifndef __ASSEMBLY__ + +typedef struct nmi_s { + volatile unsigned long magic; /* Magic number */ + volatile unsigned long flags; /* Combination of flags above */ + volatile void *call_addr; /* Routine for slave to call */ + volatile void *call_addr_c; /* 1's complement of address */ + volatile void *call_parm; /* Single parm passed to call */ + volatile unsigned long gmaster; /* Flag true only on global master*/ +} nmi_t; + +#endif /* !__ASSEMBLY__ */ + +/* Following definitions are needed both in the prom & the kernel + * to identify the format of the nmi cpu register save area in the + * low memory on each node. + */ +#ifndef __ASSEMBLY__ + +struct reg_struct { + unsigned long gpr[32]; + unsigned long sr; + unsigned long cause; + unsigned long epc; + unsigned long badva; + unsigned long error_epc; + unsigned long cache_err; + unsigned long nmi_sr; +}; + +#endif /* !__ASSEMBLY__ */ + +/* These are the assembly language offsets into the reg_struct structure */ + +#define R0_OFF 0x0 +#define R1_OFF 0x8 +#define R2_OFF 0x10 +#define R3_OFF 0x18 +#define R4_OFF 0x20 +#define R5_OFF 0x28 +#define R6_OFF 0x30 +#define R7_OFF 0x38 +#define R8_OFF 0x40 +#define R9_OFF 0x48 +#define R10_OFF 0x50 +#define R11_OFF 0x58 +#define R12_OFF 0x60 +#define R13_OFF 0x68 +#define R14_OFF 0x70 +#define R15_OFF 0x78 +#define R16_OFF 0x80 +#define R17_OFF 0x88 +#define R18_OFF 0x90 +#define R19_OFF 0x98 +#define R20_OFF 0xa0 +#define R21_OFF 0xa8 +#define R22_OFF 0xb0 +#define R23_OFF 0xb8 +#define R24_OFF 0xc0 +#define R25_OFF 0xc8 +#define R26_OFF 0xd0 +#define R27_OFF 0xd8 +#define R28_OFF 0xe0 +#define R29_OFF 0xe8 +#define R30_OFF 0xf0 +#define R31_OFF 0xf8 +#define SR_OFF 0x100 +#define CAUSE_OFF 0x108 +#define EPC_OFF 0x110 +#define BADVA_OFF 0x118 +#define ERROR_EPC_OFF 0x120 +#define CACHE_ERR_OFF 0x128 +#define NMISR_OFF 0x130 + +#endif /* __ASM_SN_NMI_H */ diff --git a/arch/mips/include/asm/sn/sn0/addrs.h b/arch/mips/include/asm/sn/sn0/addrs.h new file mode 100644 index 000000000000..b06190093bbc --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/addrs.h @@ -0,0 +1,288 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX , revision 1.126. + * + * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SN_SN0_ADDRS_H +#define _ASM_SN_SN0_ADDRS_H + + +/* + * SN0 (on a T5) Address map + * + * This file contains a set of definitions and macros which are used + * to reference into the major address spaces (CAC, HSPEC, IO, MSPEC, + * and UNCAC) used by the SN0 architecture. It also contains addresses + * for "major" statically locatable PROM/Kernel data structures, such as + * the partition table, the configuration data structure, etc. + * We make an implicit assumption that the processor using this file + * follows the R10K's provisions for specifying uncached attributes; + * should this change, the base registers may very well become processor- + * dependent. + * + * For more information on the address spaces, see the "Local Resources" + * chapter of the Hub specification. + * + * NOTE: This header file is included both by C and by assembler source + * files. Please bracket any language-dependent definitions + * appropriately. + */ + +/* + * Some of the macros here need to be casted to appropriate types when used + * from C. They definitely must not be casted from assembly language so we + * use some new ANSI preprocessor stuff to paste these on where needed. + */ + +/* + * The following couple of definitions will eventually need to be variables, + * since the amount of address space assigned to each node depends on + * whether the system is running in N-mode (more nodes with less memory) + * or M-mode (fewer nodes with more memory). We expect that it will + * be a while before we need to make this decision dynamically, though, + * so for now we just use defines bracketed by an ifdef. + */ + +#ifdef CONFIG_SGI_SN_N_MODE + +#define NODE_SIZE_BITS 31 +#define BWIN_SIZE_BITS 28 + +#define NASID_BITS 9 +#define NASID_BITMASK (0x1ffLL) +#define NASID_SHFT 31 +#define NASID_META_BITS 5 +#define NASID_LOCAL_BITS 4 + +#define BDDIR_UPPER_MASK (UINT64_CAST 0x7ffff << 10) +#define BDECC_UPPER_MASK (UINT64_CAST 0x3ffffff << 3) + +#else /* !defined(CONFIG_SGI_SN_N_MODE), assume that M-mode is desired */ + +#define NODE_SIZE_BITS 32 +#define BWIN_SIZE_BITS 29 + +#define NASID_BITMASK (0xffLL) +#define NASID_BITS 8 +#define NASID_SHFT 32 +#define NASID_META_BITS 4 +#define NASID_LOCAL_BITS 4 + +#define BDDIR_UPPER_MASK (UINT64_CAST 0xfffff << 10) +#define BDECC_UPPER_MASK (UINT64_CAST 0x7ffffff << 3) + +#endif /* !defined(CONFIG_SGI_SN_N_MODE) */ + +#define NODE_ADDRSPACE_SIZE (UINT64_CAST 1 << NODE_SIZE_BITS) + +#define NASID_MASK (UINT64_CAST NASID_BITMASK << NASID_SHFT) +#define NASID_GET(_pa) (int) ((UINT64_CAST (_pa) >> \ + NASID_SHFT) & NASID_BITMASK) + +#if !defined(__ASSEMBLY__) + +#define NODE_SWIN_BASE(nasid, widget) \ + ((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN) \ + : RAW_NODE_SWIN_BASE(nasid, widget)) +#else /* __ASSEMBLY__ */ +#define NODE_SWIN_BASE(nasid, widget) \ + (NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS)) +#endif /* __ASSEMBLY__ */ + +/* + * The following definitions pertain to the IO special address + * space. They define the location of the big and little windows + * of any given node. + */ + +#define BWIN_INDEX_BITS 3 +#define BWIN_SIZE (UINT64_CAST 1 << BWIN_SIZE_BITS) +#define BWIN_SIZEMASK (BWIN_SIZE - 1) +#define BWIN_WIDGET_MASK 0x7 +#define NODE_BWIN_BASE0(nasid) (NODE_IO_BASE(nasid) + BWIN_SIZE) +#define NODE_BWIN_BASE(nasid, bigwin) (NODE_BWIN_BASE0(nasid) + \ + (UINT64_CAST(bigwin) << BWIN_SIZE_BITS)) + +#define BWIN_WIDGETADDR(addr) ((addr) & BWIN_SIZEMASK) +#define BWIN_WINDOWNUM(addr) (((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK) +/* + * Verify if addr belongs to large window address of node with "nasid" + * + * + * NOTE: "addr" is expected to be XKPHYS address, and NOT physical + * address + * + * + */ + +#define NODE_BWIN_ADDR(nasid, addr) \ + (((addr) >= NODE_BWIN_BASE0(nasid)) && \ + ((addr) < (NODE_BWIN_BASE(nasid, HUB_NUM_BIG_WINDOW) + \ + BWIN_SIZE))) + +/* + * The following define the major position-independent aliases used + * in SN0. + * CALIAS -- Varies in size, points to the first n bytes of memory + * on the reader's node. + */ + +#define CALIAS_BASE CAC_BASE + + + +#define BRIDGE_REG_PTR(_base, _off) ((volatile bridgereg_t *) \ + ((__psunsigned_t)(_base) + (__psunsigned_t)(_off))) + +#define SN0_WIDGET_BASE(_nasid, _wid) (NODE_SWIN_BASE((_nasid), (_wid))) + +/* Turn on sable logging for the processors whose bits are set. */ +#define SABLE_LOG_TRIGGER(_map) + +#ifndef __ASSEMBLY__ +#define KERN_NMI_ADDR(nasid, slice) \ + TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + \ + (IP27_NMI_KREGS_CPU_SIZE * (slice))) +#endif /* !__ASSEMBLY__ */ + +#ifdef PROM + +#define MISC_PROM_BASE PHYS_TO_K0(0x01300000) +#define MISC_PROM_SIZE 0x200000 + +#define DIAG_BASE PHYS_TO_K0(0x01500000) +#define DIAG_SIZE 0x300000 + +#define ROUTE_BASE PHYS_TO_K0(0x01800000) +#define ROUTE_SIZE 0x200000 + +#define IP27PROM_FLASH_HDR PHYS_TO_K0(0x01300000) +#define IP27PROM_FLASH_DATA PHYS_TO_K0(0x01301000) +#define IP27PROM_CORP_MAX 32 +#define IP27PROM_CORP PHYS_TO_K0(0x01800000) +#define IP27PROM_CORP_SIZE 0x10000 +#define IP27PROM_CORP_STK PHYS_TO_K0(0x01810000) +#define IP27PROM_CORP_STKSIZE 0x2000 +#define IP27PROM_DECOMP_BUF PHYS_TO_K0(0x01900000) +#define IP27PROM_DECOMP_SIZE 0xfff00 + +#define IP27PROM_BASE PHYS_TO_K0(0x01a00000) +#define IP27PROM_BASE_MAPPED (UNCAC_BASE | 0x1fc00000) +#define IP27PROM_SIZE_MAX 0x100000 + +#define IP27PROM_PCFG PHYS_TO_K0(0x01b00000) +#define IP27PROM_PCFG_SIZE 0xd0000 +#define IP27PROM_ERRDMP PHYS_TO_K1(0x01bd0000) +#define IP27PROM_ERRDMP_SIZE 0xf000 + +#define IP27PROM_INIT_START PHYS_TO_K1(0x01bd0000) +#define IP27PROM_CONSOLE PHYS_TO_K1(0x01bdf000) +#define IP27PROM_CONSOLE_SIZE 0x200 +#define IP27PROM_NETUART PHYS_TO_K1(0x01bdf200) +#define IP27PROM_NETUART_SIZE 0x100 +#define IP27PROM_UNUSED1 PHYS_TO_K1(0x01bdf300) +#define IP27PROM_UNUSED1_SIZE 0x500 +#define IP27PROM_ELSC_BASE_A PHYS_TO_K0(0x01bdf800) +#define IP27PROM_ELSC_BASE_B PHYS_TO_K0(0x01bdfc00) +#define IP27PROM_STACK_A PHYS_TO_K0(0x01be0000) +#define IP27PROM_STACK_B PHYS_TO_K0(0x01bf0000) +#define IP27PROM_STACK_SHFT 16 +#define IP27PROM_STACK_SIZE (1 << IP27PROM_STACK_SHFT) +#define IP27PROM_INIT_END PHYS_TO_K0(0x01c00000) + +#define SLAVESTACK_BASE PHYS_TO_K0(0x01580000) +#define SLAVESTACK_SIZE 0x40000 + +#define ENETBUFS_BASE PHYS_TO_K0(0x01f80000) +#define ENETBUFS_SIZE 0x20000 + +#define IO6PROM_BASE PHYS_TO_K0(0x01c00000) +#define IO6PROM_SIZE 0x400000 +#define IO6PROM_BASE_MAPPED (UNCAC_BASE | 0x11c00000) +#define IO6DPROM_BASE PHYS_TO_K0(0x01c00000) +#define IO6DPROM_SIZE 0x200000 + +#define NODEBUGUNIX_ADDR PHYS_TO_K0(0x00019000) +#define DEBUGUNIX_ADDR PHYS_TO_K0(0x00100000) + +#define IP27PROM_INT_LAUNCH 10 /* and 11 */ +#define IP27PROM_INT_NETUART 12 /* through 17 */ + +#endif /* PROM */ + +/* + * needed by symmon so it needs to be outside #if PROM + */ +#define IP27PROM_ELSC_SHFT 10 +#define IP27PROM_ELSC_SIZE (1 << IP27PROM_ELSC_SHFT) + +/* + * This address is used by IO6PROM to build MemoryDescriptors of + * free memory. This address is important since unix gets loaded + * at this address, and this memory has to be FREE if unix is to + * be loaded. + */ + +#define FREEMEM_BASE PHYS_TO_K0(0x2000000) + +#define IO6PROM_STACK_SHFT 14 /* stack per cpu */ +#define IO6PROM_STACK_SIZE (1 << IO6PROM_STACK_SHFT) + +/* + * IP27 PROM vectors + */ + +#define IP27PROM_ENTRY PHYS_TO_COMPATK1(0x1fc00000) +#define IP27PROM_RESTART PHYS_TO_COMPATK1(0x1fc00008) +#define IP27PROM_SLAVELOOP PHYS_TO_COMPATK1(0x1fc00010) +#define IP27PROM_PODMODE PHYS_TO_COMPATK1(0x1fc00018) +#define IP27PROM_IOC3UARTPOD PHYS_TO_COMPATK1(0x1fc00020) +#define IP27PROM_FLASHLEDS PHYS_TO_COMPATK1(0x1fc00028) +#define IP27PROM_REPOD PHYS_TO_COMPATK1(0x1fc00030) +#define IP27PROM_LAUNCHSLAVE PHYS_TO_COMPATK1(0x1fc00038) +#define IP27PROM_WAITSLAVE PHYS_TO_COMPATK1(0x1fc00040) +#define IP27PROM_POLLSLAVE PHYS_TO_COMPATK1(0x1fc00048) + +#define KL_UART_BASE LOCAL_HUB_ADDR(MD_UREG0_0) /* base of UART regs */ +#define KL_UART_CMD LOCAL_HUB_ADDR(MD_UREG0_0) /* UART command reg */ +#define KL_UART_DATA LOCAL_HUB_ADDR(MD_UREG0_1) /* UART data reg */ +#define KL_I2C_REG MD_UREG0_0 /* I2C reg */ + +#ifndef __ASSEMBLY__ + +/* Address 0x400 to 0x1000 ualias points to cache error eframe + misc + * CACHE_ERR_SP_PTR could either contain an address to the stack, or + * the stack could start at CACHE_ERR_SP_PTR + */ +#if defined(HUB_ERR_STS_WAR) +#define CACHE_ERR_EFRAME 0x480 +#else /* HUB_ERR_STS_WAR */ +#define CACHE_ERR_EFRAME 0x400 +#endif /* HUB_ERR_STS_WAR */ + +#define CACHE_ERR_ECCFRAME (CACHE_ERR_EFRAME + EF_SIZE) +#define CACHE_ERR_SP_PTR (0x1000 - 32) /* why -32? TBD */ +#define CACHE_ERR_IBASE_PTR (0x1000 - 40) +#define CACHE_ERR_SP (CACHE_ERR_SP_PTR - 16) +#define CACHE_ERR_AREA_SIZE (ARCS_SPB_OFFSET - CACHE_ERR_EFRAME) + +#endif /* !__ASSEMBLY__ */ + +#define _ARCSPROM + +#if defined(HUB_ERR_STS_WAR) + +#define ERR_STS_WAR_REGISTER IIO_IIBUSERR +#define ERR_STS_WAR_ADDR LOCAL_HUB_ADDR(IIO_IIBUSERR) +#define ERR_STS_WAR_PHYSADDR TO_PHYS((__psunsigned_t)ERR_STS_WAR_ADDR) + /* Used to match addr in error reg. */ +#define OLD_ERR_STS_WAR_OFFSET ((MD_MEM_BANKS * MD_BANK_SIZE) - 0x100) + +#endif /* HUB_ERR_STS_WAR */ + +#endif /* _ASM_SN_SN0_ADDRS_H */ diff --git a/arch/mips/include/asm/sn/sn0/arch.h b/arch/mips/include/asm/sn/sn0/arch.h new file mode 100644 index 000000000000..f734f2007f24 --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/arch.h @@ -0,0 +1,72 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI IP27 specific setup. + * + * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc. + * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_SN_SN0_ARCH_H +#define _ASM_SN_SN0_ARCH_H + + +#ifndef SN0XXL /* 128 cpu SMP max */ +/* + * This is the maximum number of nodes that can be part of a kernel. + * Effectively, it's the maximum number of compact node ids (cnodeid_t). + */ +#define MAX_COMPACT_NODES 64 + +/* + * MAXCPUS refers to the maximum number of CPUs in a single kernel. + * This is not necessarily the same as MAXNODES * CPUS_PER_NODE + */ +#define MAXCPUS 128 + +#else /* SN0XXL system */ + +#define MAX_COMPACT_NODES 128 +#define MAXCPUS 256 + +#endif /* SN0XXL */ + +/* + * This is the maximum number of NASIDS that can be present in a system. + * (Highest NASID plus one.) + */ +#define MAX_NASIDS 256 + +/* + * MAX_REGIONS refers to the maximum number of hardware partitioned regions. + */ +#define MAX_REGIONS 64 +#define MAX_NONPREMIUM_REGIONS 16 +#define MAX_PREMIUM_REGIONS MAX_REGIONS + +/* + * MAX_PARITIONS refers to the maximum number of logically defined + * partitions the system can support. + */ +#define MAX_PARTITIONS MAX_REGIONS + +#define NASID_MASK_BYTES ((MAX_NASIDS + 7) / 8) + +/* + * Slot constants for SN0 + */ +#ifdef CONFIG_SGI_SN_N_MODE +#define MAX_MEM_SLOTS 16 /* max slots per node */ +#else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */ +#define MAX_MEM_SLOTS 32 /* max slots per node */ +#endif /* CONFIG_SGI_SN_M_MODE */ + +#define SLOT_SHIFT (27) +#define SLOT_MIN_MEM_SIZE (32*1024*1024) + +#define CPUS_PER_NODE 2 /* CPUs on a single hub */ +#define CPUS_PER_NODE_SHFT 1 /* Bits to shift in the node number */ +#define CPUS_PER_SUBNODE 2 /* CPUs on a single hub PI */ + +#endif /* _ASM_SN_SN0_ARCH_H */ diff --git a/arch/mips/include/asm/sn/sn0/hub.h b/arch/mips/include/asm/sn/sn0/hub.h new file mode 100644 index 000000000000..3e228f8e7969 --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/hub.h @@ -0,0 +1,40 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SN_SN0_HUB_H +#define _ASM_SN_SN0_HUB_H + +/* The secret password; used to release protection */ +#define HUB_PASSWORD 0x53474972756c6573ull + +#define CHIPID_HUB 0 +#define CHIPID_ROUTER 1 + +#define HUB_REV_1_0 1 +#define HUB_REV_2_0 2 +#define HUB_REV_2_1 3 +#define HUB_REV_2_2 4 +#define HUB_REV_2_3 5 +#define HUB_REV_2_4 6 + +#define MAX_HUB_PATH 80 + +#include +#include +#include +#include +#include +//#include + +/* Translation of uncached attributes */ +#define UATTR_HSPEC 0 +#define UATTR_IO 1 +#define UATTR_MSPEC 2 +#define UATTR_UNCAC 3 + +#endif /* _ASM_SN_SN0_HUB_H */ diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h new file mode 100644 index 000000000000..d0c29d4de084 --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/hubio.h @@ -0,0 +1,972 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX , Revision 1.80. + * + * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SGI_SN_SN0_HUBIO_H +#define _ASM_SGI_SN_SN0_HUBIO_H + +/* + * Hub I/O interface registers + * + * All registers in this file are subject to change until Hub chip tapeout. + * In general, the longer software name should be used when available. + */ + +/* + * Slightly friendlier names for some common registers. + * The hardware definitions follow. + */ +#define IIO_WIDGET IIO_WID /* Widget identification */ +#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */ +#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */ +#define IIO_WIDGET_TOUT IIO_WRTO /* Widget request timeout */ +#define IIO_WIDGET_FLUSH IIO_WTFR /* Widget target flush */ +#define IIO_PROTECT IIO_ILAPR /* IO interface protection */ +#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */ +#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */ +#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */ +#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */ +#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */ +#define IIO_LLP_LOG IIO_ILLR /* LLP log */ +#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout*/ +#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */ +#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */ +#define IIO_BTE_CRB_CNT IIO_IBCN /* IO BTE CRB count */ + +#define IIO_LLP_CSR_IS_UP 0x00002000 +#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000 +#define IIO_LLP_CSR_LLP_STAT_SHFT 12 + +/* key to IIO_PROTECT_OVRRD */ +#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */ + +/* BTE register names */ +#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */ +#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */ +#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */ +#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */ +#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */ +#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */ +#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */ +#define IIO_BTE_OFF_1 IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */ + +/* BTE register offsets from base */ +#define BTEOFF_STAT 0 +#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0) +#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0) +#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0) +#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0) +#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0) + + +/* + * The following definitions use the names defined in the IO interface + * document for ease of reference. When possible, software should + * generally use the longer but clearer names defined above. + */ + +#define IIO_BASE 0x400000 +#define IIO_BASE_BTE0 0x410000 +#define IIO_BASE_BTE1 0x420000 +#define IIO_BASE_PERF 0x430000 +#define IIO_PERF_CNT 0x430008 + +#define IO_PERF_SETS 32 + +#define IIO_WID 0x400000 /* Widget identification */ +#define IIO_WSTAT 0x400008 /* Widget status */ +#define IIO_WCR 0x400020 /* Widget control */ + +#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */ +#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */ +#define IIO_WSTAT_TXRETRY_MASK (0x7F) +#define IIO_WSTAT_TXRETRY_SHFT (16) +#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \ + IIO_WSTAT_TXRETRY_MASK) + +#define IIO_ILAPR 0x400100 /* Local Access Protection */ +#define IIO_ILAPO 0x400108 /* Protection override */ +#define IIO_IOWA 0x400110 /* outbound widget access */ +#define IIO_IIWA 0x400118 /* inbound widget access */ +#define IIO_IIDEM 0x400120 /* Inbound Device Error Mask */ +#define IIO_ILCSR 0x400128 /* LLP control and status */ +#define IIO_ILLR 0x400130 /* LLP Log */ +#define IIO_IIDSR 0x400138 /* Interrupt destination */ + +#define IIO_IIBUSERR 0x1400208 /* Reads here cause a bus error. */ + +/* IO Interrupt Destination Register */ +#define IIO_IIDSR_SENT_SHIFT 28 +#define IIO_IIDSR_SENT_MASK 0x10000000 +#define IIO_IIDSR_ENB_SHIFT 24 +#define IIO_IIDSR_ENB_MASK 0x01000000 +#define IIO_IIDSR_NODE_SHIFT 8 +#define IIO_IIDSR_NODE_MASK 0x0000ff00 +#define IIO_IIDSR_LVL_SHIFT 0 +#define IIO_IIDSR_LVL_MASK 0x0000003f + + +/* GFX Flow Control Node/Widget Register */ +#define IIO_IGFX_0 0x400140 /* gfx node/widget register 0 */ +#define IIO_IGFX_1 0x400148 /* gfx node/widget register 1 */ +#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */ +#define IIO_IGFX_W_NUM_MASK ((1<, revision 1.59. + * + * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SN_SN0_HUBMD_H +#define _ASM_SN_SN0_HUBMD_H + + +/* + * Hub Memory/Directory interface registers + */ +#define CACHE_SLINE_SIZE 128 /* Secondary cache line size on SN0 */ + +#define MAX_REGIONS 64 + +/* Hardware page size and shift */ + +#define MD_PAGE_SIZE 4096 /* Page size in bytes */ +#define MD_PAGE_NUM_SHFT 12 /* Address to page number shift */ + +/* Register offsets from LOCAL_HUB or REMOTE_HUB */ + +#define MD_BASE 0x200000 +#define MD_BASE_PERF 0x210000 +#define MD_BASE_JUNK 0x220000 + +#define MD_IO_PROTECT 0x200000 /* MD and core register protection */ +#define MD_IO_PROT_OVRRD 0x200008 /* Clear my bit in MD_IO_PROTECT */ +#define MD_HSPEC_PROTECT 0x200010 /* BDDIR, LBOOT, RBOOT protection */ +#define MD_MEMORY_CONFIG 0x200018 /* Memory/Directory DIMM control */ +#define MD_REFRESH_CONTROL 0x200020 /* Memory/Directory refresh ctrl */ +#define MD_FANDOP_CAC_STAT 0x200028 /* Fetch-and-op cache status */ +#define MD_MIG_DIFF_THRESH 0x200030 /* Page migr. count diff thresh. */ +#define MD_MIG_VALUE_THRESH 0x200038 /* Page migr. count abs. thresh. */ +#define MD_MIG_CANDIDATE 0x200040 /* Latest page migration candidate */ +#define MD_MIG_CANDIDATE_CLR 0x200048 /* Clear page migration candidate */ +#define MD_DIR_ERROR 0x200050 /* Directory DIMM error */ +#define MD_DIR_ERROR_CLR 0x200058 /* Directory DIMM error clear */ +#define MD_PROTOCOL_ERROR 0x200060 /* Directory protocol error */ +#define MD_PROTOCOL_ERROR_CLR 0x200068 /* Directory protocol error clear */ +#define MD_MEM_ERROR 0x200070 /* Memory DIMM error */ +#define MD_MEM_ERROR_CLR 0x200078 /* Memory DIMM error clear */ +#define MD_MISC_ERROR 0x200080 /* Miscellaneous MD error */ +#define MD_MISC_ERROR_CLR 0x200088 /* Miscellaneous MD error clear */ +#define MD_MEM_DIMM_INIT 0x200090 /* Memory DIMM mode initization. */ +#define MD_DIR_DIMM_INIT 0x200098 /* Directory DIMM mode init. */ +#define MD_MOQ_SIZE 0x2000a0 /* MD outgoing queue size */ +#define MD_MLAN_CTL 0x2000a8 /* NIC (Microlan) control register */ + +#define MD_PERF_SEL 0x210000 /* Select perf monitor events */ +#define MD_PERF_CNT0 0x210010 /* Performance counter 0 */ +#define MD_PERF_CNT1 0x210018 /* Performance counter 1 */ +#define MD_PERF_CNT2 0x210020 /* Performance counter 2 */ +#define MD_PERF_CNT3 0x210028 /* Performance counter 3 */ +#define MD_PERF_CNT4 0x210030 /* Performance counter 4 */ +#define MD_PERF_CNT5 0x210038 /* Performance counter 5 */ + +#define MD_UREG0_0 0x220000 /* uController/UART 0 register */ +#define MD_UREG0_1 0x220008 /* uController/UART 0 register */ +#define MD_UREG0_2 0x220010 /* uController/UART 0 register */ +#define MD_UREG0_3 0x220018 /* uController/UART 0 register */ +#define MD_UREG0_4 0x220020 /* uController/UART 0 register */ +#define MD_UREG0_5 0x220028 /* uController/UART 0 register */ +#define MD_UREG0_6 0x220030 /* uController/UART 0 register */ +#define MD_UREG0_7 0x220038 /* uController/UART 0 register */ + +#define MD_SLOTID_USTAT 0x220048 /* Hub slot ID & UART/uCtlr status */ +#define MD_LED0 0x220050 /* Eight-bit LED for CPU A */ +#define MD_LED1 0x220058 /* Eight-bit LED for CPU B */ + +#define MD_UREG1_0 0x220080 /* uController/UART 1 register */ +#define MD_UREG1_1 0x220088 /* uController/UART 1 register */ +#define MD_UREG1_2 0x220090 /* uController/UART 1 register */ +#define MD_UREG1_3 0x220098 /* uController/UART 1 register */ +#define MD_UREG1_4 0x2200a0 /* uController/UART 1 register */ +#define MD_UREG1_5 0x2200a8 /* uController/UART 1 register */ +#define MD_UREG1_6 0x2200b0 /* uController/UART 1 register */ +#define MD_UREG1_7 0x2200b8 /* uController/UART 1 register */ +#define MD_UREG1_8 0x2200c0 /* uController/UART 1 register */ +#define MD_UREG1_9 0x2200c8 /* uController/UART 1 register */ +#define MD_UREG1_10 0x2200d0 /* uController/UART 1 register */ +#define MD_UREG1_11 0x2200d8 /* uController/UART 1 register */ +#define MD_UREG1_12 0x2200e0 /* uController/UART 1 register */ +#define MD_UREG1_13 0x2200e8 /* uController/UART 1 register */ +#define MD_UREG1_14 0x2200f0 /* uController/UART 1 register */ +#define MD_UREG1_15 0x2200f8 /* uController/UART 1 register */ + +#ifdef CONFIG_SGI_SN_N_MODE +#define MD_MEM_BANKS 4 /* 4 banks of memory max in N mode */ +#else +#define MD_MEM_BANKS 8 /* 8 banks of memory max in M mode */ +#endif + +/* + * MD_MEMORY_CONFIG fields + * + * MD_SIZE_xxx are useful for representing the size of a SIMM or bank + * (SIMM pair). They correspond to the values needed for the bit + * triplets (MMC_BANK_MASK) in the MD_MEMORY_CONFIG register for bank size. + * Bits not used by the MD are used by software. + */ + +#define MD_SIZE_EMPTY 0 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_8MB 1 +#define MD_SIZE_16MB 2 +#define MD_SIZE_32MB 3 /* Broken in Hub 1 */ +#define MD_SIZE_64MB 4 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_128MB 5 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_256MB 6 +#define MD_SIZE_512MB 7 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_1GB 8 +#define MD_SIZE_2GB 9 +#define MD_SIZE_4GB 10 + +#define MD_SIZE_BYTES(size) ((size) == 0 ? 0 : 0x400000L << (size)) +#define MD_SIZE_MBYTES(size) ((size) == 0 ? 0 : 4 << (size)) + +#define MMC_FPROM_CYC_SHFT 49 /* Have to use UINT64_CAST, instead */ +#define MMC_FPROM_CYC_MASK (UINT64_CAST 31 << 49) /* of 'L' suffix, */ +#define MMC_FPROM_WR_SHFT 44 /* for assembler */ +#define MMC_FPROM_WR_MASK (UINT64_CAST 31 << 44) +#define MMC_UCTLR_CYC_SHFT 39 +#define MMC_UCTLR_CYC_MASK (UINT64_CAST 31 << 39) +#define MMC_UCTLR_WR_SHFT 34 +#define MMC_UCTLR_WR_MASK (UINT64_CAST 31 << 34) +#define MMC_DIMM0_SEL_SHFT 32 +#define MMC_DIMM0_SEL_MASK (UINT64_CAST 3 << 32) +#define MMC_IO_PROT_EN_SHFT 31 +#define MMC_IO_PROT_EN_MASK (UINT64_CAST 1 << 31) +#define MMC_IO_PROT (UINT64_CAST 1 << 31) +#define MMC_ARB_MLSS_SHFT 30 +#define MMC_ARB_MLSS_MASK (UINT64_CAST 1 << 30) +#define MMC_ARB_MLSS (UINT64_CAST 1 << 30) +#define MMC_IGNORE_ECC_SHFT 29 +#define MMC_IGNORE_ECC_MASK (UINT64_CAST 1 << 29) +#define MMC_IGNORE_ECC (UINT64_CAST 1 << 29) +#define MMC_DIR_PREMIUM_SHFT 28 +#define MMC_DIR_PREMIUM_MASK (UINT64_CAST 1 << 28) +#define MMC_DIR_PREMIUM (UINT64_CAST 1 << 28) +#define MMC_REPLY_GUAR_SHFT 24 +#define MMC_REPLY_GUAR_MASK (UINT64_CAST 15 << 24) +#define MMC_BANK_SHFT(_b) ((_b) * 3) +#define MMC_BANK_MASK(_b) (UINT64_CAST 7 << MMC_BANK_SHFT(_b)) +#define MMC_BANK_ALL_MASK 0xffffff +#define MMC_RESET_DEFAULTS (UINT64_CAST 0x0f << MMC_FPROM_CYC_SHFT | \ + UINT64_CAST 0x07 << MMC_FPROM_WR_SHFT | \ + UINT64_CAST 0x1f << MMC_UCTLR_CYC_SHFT | \ + UINT64_CAST 0x0f << MMC_UCTLR_WR_SHFT | \ + MMC_IGNORE_ECC | MMC_DIR_PREMIUM | \ + UINT64_CAST 0x0f << MMC_REPLY_GUAR_SHFT | \ + MMC_BANK_ALL_MASK) + +/* MD_REFRESH_CONTROL fields */ + +#define MRC_ENABLE_SHFT 63 +#define MRC_ENABLE_MASK (UINT64_CAST 1 << 63) +#define MRC_ENABLE (UINT64_CAST 1 << 63) +#define MRC_COUNTER_SHFT 12 +#define MRC_COUNTER_MASK (UINT64_CAST 0xfff << 12) +#define MRC_CNT_THRESH_MASK 0xfff +#define MRC_RESET_DEFAULTS (UINT64_CAST 0x400) + +/* MD_MEM_DIMM_INIT and MD_DIR_DIMM_INIT fields */ + +#define MDI_SELECT_SHFT 32 +#define MDI_SELECT_MASK (UINT64_CAST 0x0f << 32) +#define MDI_DIMM_MODE_MASK (UINT64_CAST 0xfff) + +/* MD_MOQ_SIZE fields */ + +#define MMS_RP_SIZE_SHFT 8 +#define MMS_RP_SIZE_MASK (UINT64_CAST 0x3f << 8) +#define MMS_RQ_SIZE_SHFT 0 +#define MMS_RQ_SIZE_MASK (UINT64_CAST 0x1f) +#define MMS_RESET_DEFAULTS (0x32 << 8 | 0x12) + +/* MD_FANDOP_CAC_STAT fields */ + +#define MFC_VALID_SHFT 63 +#define MFC_VALID_MASK (UINT64_CAST 1 << 63) +#define MFC_VALID (UINT64_CAST 1 << 63) +#define MFC_ADDR_SHFT 6 +#define MFC_ADDR_MASK (UINT64_CAST 0x3ffffff) + +/* MD_MLAN_CTL fields */ + +#define MLAN_PHI1_SHFT 27 +#define MLAN_PHI1_MASK (UINT64_CAST 0x7f << 27) +#define MLAN_PHI0_SHFT 20 +#define MLAN_PHI0_MASK (UINT64_CAST 0x7f << 27) +#define MLAN_PULSE_SHFT 10 +#define MLAN_PULSE_MASK (UINT64_CAST 0x3ff << 10) +#define MLAN_SAMPLE_SHFT 2 +#define MLAN_SAMPLE_MASK (UINT64_CAST 0xff << 2) +#define MLAN_DONE_SHFT 1 +#define MLAN_DONE_MASK 2 +#define MLAN_DONE (UINT64_CAST 0x02) +#define MLAN_RD_DATA (UINT64_CAST 0x01) +#define MLAN_RESET_DEFAULTS (UINT64_CAST 0x31 << MLAN_PHI1_SHFT | \ + UINT64_CAST 0x31 << MLAN_PHI0_SHFT) + +/* MD_SLOTID_USTAT bit definitions */ + +#define MSU_CORECLK_TST_SHFT 7 /* You don't wanna know */ +#define MSU_CORECLK_TST_MASK (UINT64_CAST 1 << 7) +#define MSU_CORECLK_TST (UINT64_CAST 1 << 7) +#define MSU_CORECLK_SHFT 6 /* You don't wanna know */ +#define MSU_CORECLK_MASK (UINT64_CAST 1 << 6) +#define MSU_CORECLK (UINT64_CAST 1 << 6) +#define MSU_NETSYNC_SHFT 5 /* You don't wanna know */ +#define MSU_NETSYNC_MASK (UINT64_CAST 1 << 5) +#define MSU_NETSYNC (UINT64_CAST 1 << 5) +#define MSU_FPROMRDY_SHFT 4 /* Flash PROM ready bit */ +#define MSU_FPROMRDY_MASK (UINT64_CAST 1 << 4) +#define MSU_FPROMRDY (UINT64_CAST 1 << 4) +#define MSU_I2CINTR_SHFT 3 /* I2C interrupt bit */ +#define MSU_I2CINTR_MASK (UINT64_CAST 1 << 3) +#define MSU_I2CINTR (UINT64_CAST 1 << 3) +#define MSU_SLOTID_MASK 0xff +#define MSU_SN0_SLOTID_SHFT 0 /* Slot ID */ +#define MSU_SN0_SLOTID_MASK (UINT64_CAST 7) +#define MSU_SN00_SLOTID_SHFT 7 +#define MSU_SN00_SLOTID_MASK (UINT64_CAST 0x80) + +#define MSU_PIMM_PSC_SHFT 4 +#define MSU_PIMM_PSC_MASK (0xf << MSU_PIMM_PSC_SHFT) + +/* MD_MIG_DIFF_THRESH bit definitions */ + +#define MD_MIG_DIFF_THRES_VALID_MASK (UINT64_CAST 0x1 << 63) +#define MD_MIG_DIFF_THRES_VALID_SHFT 63 +#define MD_MIG_DIFF_THRES_VALUE_MASK (UINT64_CAST 0xfffff) + +/* MD_MIG_VALUE_THRESH bit definitions */ + +#define MD_MIG_VALUE_THRES_VALID_MASK (UINT64_CAST 0x1 << 63) +#define MD_MIG_VALUE_THRES_VALID_SHFT 63 +#define MD_MIG_VALUE_THRES_VALUE_MASK (UINT64_CAST 0xfffff) + +/* MD_MIG_CANDIDATE bit definitions */ + +#define MD_MIG_CANDIDATE_VALID_MASK (UINT64_CAST 0x1 << 63) +#define MD_MIG_CANDIDATE_VALID_SHFT 63 +#define MD_MIG_CANDIDATE_TYPE_MASK (UINT64_CAST 0x1 << 30) +#define MD_MIG_CANDIDATE_TYPE_SHFT 30 +#define MD_MIG_CANDIDATE_OVERRUN_MASK (UINT64_CAST 0x1 << 29) +#define MD_MIG_CANDIDATE_OVERRUN_SHFT 29 +#define MD_MIG_CANDIDATE_INITIATOR_MASK (UINT64_CAST 0x7ff << 18) +#define MD_MIG_CANDIDATE_INITIATOR_SHFT 18 +#define MD_MIG_CANDIDATE_NODEID_MASK (UINT64_CAST 0x1ff << 20) +#define MD_MIG_CANDIDATE_NODEID_SHFT 20 +#define MD_MIG_CANDIDATE_ADDR_MASK (UINT64_CAST 0x3ffff) +#define MD_MIG_CANDIDATE_ADDR_SHFT 14 /* The address starts at bit 14 */ + +/* Other MD definitions */ + +#define MD_BANK_SHFT 29 /* log2(512 MB) */ +#define MD_BANK_MASK (UINT64_CAST 7 << 29) +#define MD_BANK_SIZE (UINT64_CAST 1 << MD_BANK_SHFT) /* 512 MB */ +#define MD_BANK_OFFSET(_b) (UINT64_CAST (_b) << MD_BANK_SHFT) + +/* + * The following definitions cover the bit field definitions for the + * various MD registers. For multi-bit registers, we define both + * a shift amount and a mask value. By convention, if you want to + * isolate a field, you should mask the field and then shift it down, + * since this makes the masks useful without a shift. + */ + +/* Directory entry states for both premium and standard SIMMs. */ + +#define MD_DIR_SHARED (UINT64_CAST 0x0) /* 000 */ +#define MD_DIR_POISONED (UINT64_CAST 0x1) /* 001 */ +#define MD_DIR_EXCLUSIVE (UINT64_CAST 0x2) /* 010 */ +#define MD_DIR_BUSY_SHARED (UINT64_CAST 0x3) /* 011 */ +#define MD_DIR_BUSY_EXCL (UINT64_CAST 0x4) /* 100 */ +#define MD_DIR_WAIT (UINT64_CAST 0x5) /* 101 */ +#define MD_DIR_UNOWNED (UINT64_CAST 0x7) /* 111 */ + +/* + * The MD_DIR_FORCE_ECC bit can be added directory entry write data + * to forcing the ECC to be written as-is instead of recalculated. + */ + +#define MD_DIR_FORCE_ECC (UINT64_CAST 1 << 63) + +/* + * Premium SIMM directory entry shifts and masks. Each is valid only in the + * context(s) indicated, where A, B, and C indicate the directory entry format + * as shown, and low and/or high indicates which double-word of the entry. + * + * Format A: STATE = shared, FINE = 1 + * Format B: STATE = shared, FINE = 0 + * Format C: STATE != shared (FINE must be 0) + */ + +#define MD_PDIR_MASK 0xffffffffffff /* Whole entry */ +#define MD_PDIR_ECC_SHFT 0 /* ABC low or high */ +#define MD_PDIR_ECC_MASK 0x7f +#define MD_PDIR_PRIO_SHFT 8 /* ABC low */ +#define MD_PDIR_PRIO_MASK (0xf << 8) +#define MD_PDIR_AX_SHFT 7 /* ABC low */ +#define MD_PDIR_AX_MASK (1 << 7) +#define MD_PDIR_AX (1 << 7) +#define MD_PDIR_FINE_SHFT 12 /* ABC low */ +#define MD_PDIR_FINE_MASK (1 << 12) +#define MD_PDIR_FINE (1 << 12) +#define MD_PDIR_OCT_SHFT 13 /* A low */ +#define MD_PDIR_OCT_MASK (7 << 13) +#define MD_PDIR_STATE_SHFT 13 /* BC low */ +#define MD_PDIR_STATE_MASK (7 << 13) +#define MD_PDIR_ONECNT_SHFT 16 /* BC low */ +#define MD_PDIR_ONECNT_MASK (0x3f << 16) +#define MD_PDIR_PTR_SHFT 22 /* C low */ +#define MD_PDIR_PTR_MASK (UINT64_CAST 0x7ff << 22) +#define MD_PDIR_VECMSB_SHFT 22 /* AB low */ +#define MD_PDIR_VECMSB_BITMASK 0x3ffffff +#define MD_PDIR_VECMSB_BITSHFT 27 +#define MD_PDIR_VECMSB_MASK (UINT64_CAST MD_PDIR_VECMSB_BITMASK << 22) +#define MD_PDIR_CWOFF_SHFT 7 /* C high */ +#define MD_PDIR_CWOFF_MASK (7 << 7) +#define MD_PDIR_VECLSB_SHFT 10 /* AB high */ +#define MD_PDIR_VECLSB_BITMASK (UINT64_CAST 0x3fffffffff) +#define MD_PDIR_VECLSB_BITSHFT 0 +#define MD_PDIR_VECLSB_MASK (MD_PDIR_VECLSB_BITMASK << 10) + +/* + * Directory initialization values + */ + +#define MD_PDIR_INIT_LO (MD_DIR_UNOWNED << MD_PDIR_STATE_SHFT | \ + MD_PDIR_AX) +#define MD_PDIR_INIT_HI 0 +#define MD_PDIR_INIT_PROT (MD_PROT_RW << MD_PPROT_IO_SHFT | \ + MD_PROT_RW << MD_PPROT_SHFT) + +/* + * Standard SIMM directory entry shifts and masks. Each is valid only in the + * context(s) indicated, where A and C indicate the directory entry format + * as shown, and low and/or high indicates which double-word of the entry. + * + * Format A: STATE == shared + * Format C: STATE != shared + */ + +#define MD_SDIR_MASK 0xffff /* Whole entry */ +#define MD_SDIR_ECC_SHFT 0 /* AC low or high */ +#define MD_SDIR_ECC_MASK 0x1f +#define MD_SDIR_PRIO_SHFT 6 /* AC low */ +#define MD_SDIR_PRIO_MASK (1 << 6) +#define MD_SDIR_AX_SHFT 5 /* AC low */ +#define MD_SDIR_AX_MASK (1 << 5) +#define MD_SDIR_AX (1 << 5) +#define MD_SDIR_STATE_SHFT 7 /* AC low */ +#define MD_SDIR_STATE_MASK (7 << 7) +#define MD_SDIR_PTR_SHFT 10 /* C low */ +#define MD_SDIR_PTR_MASK (0x3f << 10) +#define MD_SDIR_CWOFF_SHFT 5 /* C high */ +#define MD_SDIR_CWOFF_MASK (7 << 5) +#define MD_SDIR_VECMSB_SHFT 11 /* A low */ +#define MD_SDIR_VECMSB_BITMASK 0x1f +#define MD_SDIR_VECMSB_BITSHFT 7 +#define MD_SDIR_VECMSB_MASK (MD_SDIR_VECMSB_BITMASK << 11) +#define MD_SDIR_VECLSB_SHFT 5 /* A high */ +#define MD_SDIR_VECLSB_BITMASK 0x7ff +#define MD_SDIR_VECLSB_BITSHFT 0 +#define MD_SDIR_VECLSB_MASK (MD_SDIR_VECLSB_BITMASK << 5) + +/* + * Directory initialization values + */ + +#define MD_SDIR_INIT_LO (MD_DIR_UNOWNED << MD_SDIR_STATE_SHFT | \ + MD_SDIR_AX) +#define MD_SDIR_INIT_HI 0 +#define MD_SDIR_INIT_PROT (MD_PROT_RW << MD_SPROT_SHFT) + +/* Protection and migration field values */ + +#define MD_PROT_RW (UINT64_CAST 0x6) +#define MD_PROT_RO (UINT64_CAST 0x3) +#define MD_PROT_NO (UINT64_CAST 0x0) +#define MD_PROT_BAD (UINT64_CAST 0x5) + +/* Premium SIMM protection entry shifts and masks. */ + +#define MD_PPROT_SHFT 0 /* Prot. field */ +#define MD_PPROT_MASK 7 +#define MD_PPROT_MIGMD_SHFT 3 /* Migration mode */ +#define MD_PPROT_MIGMD_MASK (3 << 3) +#define MD_PPROT_REFCNT_SHFT 5 /* Reference count */ +#define MD_PPROT_REFCNT_WIDTH 0x7ffff +#define MD_PPROT_REFCNT_MASK (MD_PPROT_REFCNT_WIDTH << 5) + +#define MD_PPROT_IO_SHFT 45 /* I/O Prot field */ +#define MD_PPROT_IO_MASK (UINT64_CAST 7 << 45) + +/* Standard SIMM protection entry shifts and masks. */ + +#define MD_SPROT_SHFT 0 /* Prot. field */ +#define MD_SPROT_MASK 7 +#define MD_SPROT_MIGMD_SHFT 3 /* Migration mode */ +#define MD_SPROT_MIGMD_MASK (3 << 3) +#define MD_SPROT_REFCNT_SHFT 5 /* Reference count */ +#define MD_SPROT_REFCNT_WIDTH 0x7ff +#define MD_SPROT_REFCNT_MASK (MD_SPROT_REFCNT_WIDTH << 5) + +/* Migration modes used in protection entries */ + +#define MD_PROT_MIGMD_IREL (UINT64_CAST 0x3 << 3) +#define MD_PROT_MIGMD_IABS (UINT64_CAST 0x2 << 3) +#define MD_PROT_MIGMD_PREL (UINT64_CAST 0x1 << 3) +#define MD_PROT_MIGMD_OFF (UINT64_CAST 0x0 << 3) + + +/* + * Operations on page migration threshold register + */ + +#ifndef __ASSEMBLY__ + +/* + * LED register macros + */ + +#define CPU_LED_ADDR(_nasid, _slice) \ + (private.p_sn00 ? \ + REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 + ((_slice) << 5)) : \ + REMOTE_HUB_ADDR((_nasid), MD_LED0 + ((_slice) << 3))) + +#define SET_CPU_LEDS(_nasid, _slice, _val) \ + (HUB_S(CPU_LED_ADDR(_nasid, _slice), (_val))) + +#define SET_MY_LEDS(_v) \ + SET_CPU_LEDS(get_nasid(), get_slice(), (_v)) + +/* + * Operations on Memory/Directory DIMM control register + */ + +#define DIRTYPE_PREMIUM 1 +#define DIRTYPE_STANDARD 0 +#define MD_MEMORY_CONFIG_DIR_TYPE_GET(region) (\ + (REMOTE_HUB_L(region, MD_MEMORY_CONFIG) & MMC_DIR_PREMIUM_MASK) >> \ + MMC_DIR_PREMIUM_SHFT) + + +/* + * Operations on page migration count difference and absolute threshold + * registers + */ + +#define MD_MIG_DIFF_THRESH_GET(region) ( \ + REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \ + MD_MIG_DIFF_THRES_VALUE_MASK) + +#define MD_MIG_DIFF_THRESH_SET(region, value) ( \ + REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \ + MD_MIG_DIFF_THRES_VALID_MASK | (value))) + +#define MD_MIG_DIFF_THRESH_DISABLE(region) ( \ + REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \ + REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) \ + & ~MD_MIG_DIFF_THRES_VALID_MASK)) + +#define MD_MIG_DIFF_THRESH_ENABLE(region) ( \ + REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \ + REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) \ + | MD_MIG_DIFF_THRES_VALID_MASK)) + +#define MD_MIG_DIFF_THRESH_IS_ENABLED(region) ( \ + REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \ + MD_MIG_DIFF_THRES_VALID_MASK) + +#define MD_MIG_VALUE_THRESH_GET(region) ( \ + REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) & \ + MD_MIG_VALUE_THRES_VALUE_MASK) + +#define MD_MIG_VALUE_THRESH_SET(region, value) ( \ + REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \ + MD_MIG_VALUE_THRES_VALID_MASK | (value))) + +#define MD_MIG_VALUE_THRESH_DISABLE(region) ( \ + REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \ + REMOTE_HUB_L(region, MD_MIG_VALUE_THRESH) \ + & ~MD_MIG_VALUE_THRES_VALID_MASK)) + +#define MD_MIG_VALUE_THRESH_ENABLE(region) ( \ + REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \ + REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) \ + | MD_MIG_VALUE_THRES_VALID_MASK)) + +#define MD_MIG_VALUE_THRESH_IS_ENABLED(region) ( \ + REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) & \ + MD_MIG_VALUE_THRES_VALID_MASK) + +/* + * Operations on page migration candidate register + */ + +#define MD_MIG_CANDIDATE_GET(my_region_id) ( \ + REMOTE_HUB_L((my_region_id), MD_MIG_CANDIDATE_CLR)) + +#define MD_MIG_CANDIDATE_HWPFN(value) ((value) & MD_MIG_CANDIDATE_ADDR_MASK) + +#define MD_MIG_CANDIDATE_NODEID(value) ( \ + ((value) & MD_MIG_CANDIDATE_NODEID_MASK) >> MD_MIG_CANDIDATE_NODEID_SHFT) + +#define MD_MIG_CANDIDATE_TYPE(value) ( \ + ((value) & MD_MIG_CANDIDATE_TYPE_MASK) >> MD_MIG_CANDIDATE_TYPE_SHFT) + +#define MD_MIG_CANDIDATE_VALID(value) ( \ + ((value) & MD_MIG_CANDIDATE_VALID_MASK) >> MD_MIG_CANDIDATE_VALID_SHFT) + +/* + * Macros to retrieve fields in the protection entry + */ + +/* for Premium SIMM */ +#define MD_PPROT_REFCNT_GET(value) ( \ + ((value) & MD_PPROT_REFCNT_MASK) >> MD_PPROT_REFCNT_SHFT) + +#define MD_PPROT_MIGMD_GET(value) ( \ + ((value) & MD_PPROT_MIGMD_MASK) >> MD_PPROT_MIGMD_SHFT) + +/* for Standard SIMM */ +#define MD_SPROT_REFCNT_GET(value) ( \ + ((value) & MD_SPROT_REFCNT_MASK) >> MD_SPROT_REFCNT_SHFT) + +#define MD_SPROT_MIGMD_GET(value) ( \ + ((value) & MD_SPROT_MIGMD_MASK) >> MD_SPROT_MIGMD_SHFT) + +/* + * Format of dir_error, mem_error, protocol_error and misc_error registers + */ + +struct dir_error_reg { + u64 uce_vld: 1, /* 63: valid directory uce */ + ae_vld: 1, /* 62: valid dir prot ecc error */ + ce_vld: 1, /* 61: valid correctable ECC err*/ + rsvd1: 19, /* 60-42: reserved */ + bad_prot: 3, /* 41-39: encoding, bad access rights*/ + bad_syn: 7, /* 38-32: bad dir syndrome */ + rsvd2: 2, /* 31-30: reserved */ + hspec_addr:27, /* 29-03: bddir space bad entry */ + uce_ovr: 1, /* 2: multiple dir uce's */ + ae_ovr: 1, /* 1: multiple prot ecc errs*/ + ce_ovr: 1; /* 0: multiple correctable errs */ +}; + +typedef union md_dir_error { + u64 derr_reg; /* the entire register */ + struct dir_error_reg derr_fmt; /* the register format */ +} md_dir_error_t; + + +struct mem_error_reg { + u64 uce_vld: 1, /* 63: valid memory uce */ + ce_vld: 1, /* 62: valid correctable ECC err*/ + rsvd1: 22, /* 61-40: reserved */ + bad_syn: 8, /* 39-32: bad mem ecc syndrome */ + address: 29, /* 31-03: bad entry pointer */ + rsvd2: 1, /* 2: reserved */ + uce_ovr: 1, /* 1: multiple mem uce's */ + ce_ovr: 1; /* 0: multiple correctable errs */ +}; + + +typedef union md_mem_error { + u64 merr_reg; /* the entire register */ + struct mem_error_reg merr_fmt; /* format of the mem_error reg */ +} md_mem_error_t; + + +struct proto_error_reg { + u64 valid: 1, /* 63: valid protocol error */ + rsvd1: 2, /* 62-61: reserved */ + initiator:11, /* 60-50: id of request initiator*/ + backoff: 2, /* 49-48: backoff control */ + msg_type: 8, /* 47-40: type of request */ + access: 2, /* 39-38: access rights of initiator*/ + priority: 1, /* 37: priority level of requestor*/ + dir_state: 4, /* 36-33: state of directory */ + pointer_me:1, /* 32: initiator same as dir ptr */ + address: 29, /* 31-03: request address */ + rsvd2: 2, /* 02-01: reserved */ + overrun: 1; /* 0: multiple protocol errs */ +}; + +typedef union md_proto_error { + u64 perr_reg; /* the entire register */ + struct proto_error_reg perr_fmt; /* format of the register */ +} md_proto_error_t; + + +struct md_sdir_high_fmt { + unsigned short sd_hi_bvec : 11, + sd_hi_ecc : 5; +}; + + +typedef union md_sdir_high { + /* The 16 bits of standard directory, upper word */ + unsigned short sd_hi_val; + struct md_sdir_high_fmt sd_hi_fmt; +}md_sdir_high_t; + + +struct md_sdir_low_shared_fmt { + /* The meaning of lower directory, shared */ + unsigned short sds_lo_bvec : 5, + sds_lo_unused: 1, + sds_lo_state : 3, + sds_lo_prio : 1, + sds_lo_ax : 1, + sds_lo_ecc : 5; +}; + +struct md_sdir_low_exclusive_fmt { + /* The meaning of lower directory, exclusive */ + unsigned short sde_lo_ptr : 6, + sde_lo_state : 3, + sde_lo_prio : 1, + sde_lo_ax : 1, + sde_lo_ecc : 5; +}; + + +typedef union md_sdir_low { + /* The 16 bits of standard directory, lower word */ + unsigned short sd_lo_val; + struct md_sdir_low_exclusive_fmt sde_lo_fmt; + struct md_sdir_low_shared_fmt sds_lo_fmt; +}md_sdir_low_t; + + + +struct md_pdir_high_fmt { + u64 pd_hi_unused : 16, + pd_hi_bvec : 38, + pd_hi_unused1 : 3, + pd_hi_ecc : 7; +}; + + +typedef union md_pdir_high { + /* The 48 bits of standard directory, upper word */ + u64 pd_hi_val; + struct md_pdir_high_fmt pd_hi_fmt; +}md_pdir_high_t; + + +struct md_pdir_low_shared_fmt { + /* The meaning of lower directory, shared */ + u64 pds_lo_unused : 16, + pds_lo_bvec : 26, + pds_lo_cnt : 6, + pds_lo_state : 3, + pds_lo_ste : 1, + pds_lo_prio : 4, + pds_lo_ax : 1, + pds_lo_ecc : 7; +}; + +struct md_pdir_low_exclusive_fmt { + /* The meaning of lower directory, exclusive */ + u64 pde_lo_unused : 31, + pde_lo_ptr : 11, + pde_lo_unused1 : 6, + pde_lo_state : 3, + pde_lo_ste : 1, + pde_lo_prio : 4, + pde_lo_ax : 1, + pde_lo_ecc : 7; +}; + + +typedef union md_pdir_loent { + /* The 48 bits of premium directory, lower word */ + u64 pd_lo_val; + struct md_pdir_low_exclusive_fmt pde_lo_fmt; + struct md_pdir_low_shared_fmt pds_lo_fmt; +}md_pdir_low_t; + + +/* + * the following two "union" definitions and two + * "struct" definitions are used in vmdump.c to + * represent directory memory information. + */ + +typedef union md_dir_high { + md_sdir_high_t md_sdir_high; + md_pdir_high_t md_pdir_high; +} md_dir_high_t; + +typedef union md_dir_low { + md_sdir_low_t md_sdir_low; + md_pdir_low_t md_pdir_low; +} md_dir_low_t; + +typedef struct bddir_entry { + md_dir_low_t md_dir_low; + md_dir_high_t md_dir_high; +} bddir_entry_t; + +typedef struct dir_mem_entry { + u64 prcpf[MAX_REGIONS]; + bddir_entry_t directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE]; +} dir_mem_entry_t; + + + +typedef union md_perf_sel { + u64 perf_sel_reg; + struct { + u64 perf_rsvd : 60, + perf_en : 1, + perf_sel : 3; + } perf_sel_bits; +} md_perf_sel_t; + +typedef union md_perf_cnt { + u64 perf_cnt; + struct { + u64 perf_rsvd : 44, + perf_cnt : 20; + } perf_cnt_bits; +} md_perf_cnt_t; + + +#endif /* !__ASSEMBLY__ */ + + +#define DIR_ERROR_VALID_MASK 0xe000000000000000 +#define DIR_ERROR_VALID_SHFT 61 +#define DIR_ERROR_VALID_UCE 0x8000000000000000 +#define DIR_ERROR_VALID_AE 0x4000000000000000 +#define DIR_ERROR_VALID_CE 0x2000000000000000 + +#define MEM_ERROR_VALID_MASK 0xc000000000000000 +#define MEM_ERROR_VALID_SHFT 62 +#define MEM_ERROR_VALID_UCE 0x8000000000000000 +#define MEM_ERROR_VALID_CE 0x4000000000000000 + +#define PROTO_ERROR_VALID_MASK 0x8000000000000000 + +#define MISC_ERROR_VALID_MASK 0x3ff + +/* + * Mask for hspec address that is stored in the dir error register. + * This represents bits 29 through 3. + */ +#define DIR_ERR_HSPEC_MASK 0x3ffffff8 +#define ERROR_HSPEC_MASK 0x3ffffff8 +#define ERROR_HSPEC_SHFT 3 +#define ERROR_ADDR_MASK 0xfffffff8 +#define ERROR_ADDR_SHFT 3 + +/* + * MD_MISC_ERROR register defines. + */ + +#define MMCE_VALID_MASK 0x3ff +#define MMCE_ILL_MSG_SHFT 8 +#define MMCE_ILL_MSG_MASK (UINT64_CAST 0x03 << MMCE_ILL_MSG_SHFT) +#define MMCE_ILL_REV_SHFT 6 +#define MMCE_ILL_REV_MASK (UINT64_CAST 0x03 << MMCE_ILL_REV_SHFT) +#define MMCE_LONG_PACK_SHFT 4 +#define MMCE_LONG_PACK_MASK (UINT64_CAST 0x03 << MMCE_lONG_PACK_SHFT) +#define MMCE_SHORT_PACK_SHFT 2 +#define MMCE_SHORT_PACK_MASK (UINT64_CAST 0x03 << MMCE_SHORT_PACK_SHFT) +#define MMCE_BAD_DATA_SHFT 0 +#define MMCE_BAD_DATA_MASK (UINT64_CAST 0x03 << MMCE_BAD_DATA_SHFT) + + +#define MD_PERF_COUNTERS 6 +#define MD_PERF_SETS 6 + +#define MEM_DIMM_MASK 0xe0000000 +#define MEM_DIMM_SHFT 29 + +#endif /* _ASM_SN_SN0_HUBMD_H */ diff --git a/arch/mips/include/asm/sn/sn0/hubni.h b/arch/mips/include/asm/sn/sn0/hubni.h new file mode 100644 index 000000000000..b40d3ef97a12 --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/hubni.h @@ -0,0 +1,255 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX , Revision 1.27. + * + * Copyright (C) 1992-1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SGI_SN0_HUBNI_H +#define _ASM_SGI_SN0_HUBNI_H + +#ifndef __ASSEMBLY__ +#include +#endif + +/* + * Hub Network Interface registers + * + * All registers in this file are subject to change until Hub chip tapeout. + */ + +#define NI_BASE 0x600000 +#define NI_BASE_TABLES 0x630000 + +#define NI_STATUS_REV_ID 0x600000 /* Hub network status, rev, and ID */ +#define NI_PORT_RESET 0x600008 /* Reset the network interface */ +#define NI_PROTECTION 0x600010 /* NI register access permissions */ +#define NI_GLOBAL_PARMS 0x600018 /* LLP parameters */ +#define NI_SCRATCH_REG0 0x600100 /* Scratch register 0 (64 bits) */ +#define NI_SCRATCH_REG1 0x600108 /* Scratch register 1 (64 bits) */ +#define NI_DIAG_PARMS 0x600110 /* Parameters for diags */ + +#define NI_VECTOR_PARMS 0x600200 /* Vector PIO routing parameters */ +#define NI_VECTOR 0x600208 /* Vector PIO route */ +#define NI_VECTOR_DATA 0x600210 /* Vector PIO data */ +#define NI_VECTOR_STATUS 0x600300 /* Vector PIO return status */ +#define NI_RETURN_VECTOR 0x600308 /* Vector PIO return vector */ +#define NI_VECTOR_READ_DATA 0x600310 /* Vector PIO read data */ +#define NI_VECTOR_CLEAR 0x600380 /* Vector PIO read & clear status */ + +#define NI_IO_PROTECT 0x600400 /* PIO protection bits */ +#define NI_IO_PROT_OVRRD 0x600408 /* PIO protection bit override */ + +#define NI_AGE_CPU0_MEMORY 0x600500 /* CPU 0 memory age control */ +#define NI_AGE_CPU0_PIO 0x600508 /* CPU 0 PIO age control */ +#define NI_AGE_CPU1_MEMORY 0x600510 /* CPU 1 memory age control */ +#define NI_AGE_CPU1_PIO 0x600518 /* CPU 1 PIO age control */ +#define NI_AGE_GBR_MEMORY 0x600520 /* GBR memory age control */ +#define NI_AGE_GBR_PIO 0x600528 /* GBR PIO age control */ +#define NI_AGE_IO_MEMORY 0x600530 /* IO memory age control */ +#define NI_AGE_IO_PIO 0x600538 /* IO PIO age control */ +#define NI_AGE_REG_MIN NI_AGE_CPU0_MEMORY +#define NI_AGE_REG_MAX NI_AGE_IO_PIO + +#define NI_PORT_PARMS 0x608000 /* LLP Parameters */ +#define NI_PORT_ERROR 0x608008 /* LLP Errors */ +#define NI_PORT_ERROR_CLEAR 0x608088 /* Clear the error bits */ + +#define NI_META_TABLE0 0x638000 /* First meta routing table entry */ +#define NI_META_TABLE(_x) (NI_META_TABLE0 + (8 * (_x))) +#define NI_META_ENTRIES 32 + +#define NI_LOCAL_TABLE0 0x638100 /* First local routing table entry */ +#define NI_LOCAL_TABLE(_x) (NI_LOCAL_TABLE0 + (8 * (_x))) +#define NI_LOCAL_ENTRIES 16 + +/* + * NI_STATUS_REV_ID mask and shift definitions + * Have to use UINT64_CAST instead of 'L' suffix, for assembler. + */ + +#define NSRI_8BITMODE_SHFT 30 +#define NSRI_8BITMODE_MASK (UINT64_CAST 0x1 << 30) +#define NSRI_LINKUP_SHFT 29 +#define NSRI_LINKUP_MASK (UINT64_CAST 0x1 << 29) +#define NSRI_DOWNREASON_SHFT 28 /* 0=failed, 1=never came */ +#define NSRI_DOWNREASON_MASK (UINT64_CAST 0x1 << 28) /* out of reset. */ +#define NSRI_MORENODES_SHFT 18 +#define NSRI_MORENODES_MASK (UINT64_CAST 1 << 18) /* Max. # of nodes */ +#define MORE_MEMORY 0 +#define MORE_NODES 1 +#define NSRI_REGIONSIZE_SHFT 17 +#define NSRI_REGIONSIZE_MASK (UINT64_CAST 1 << 17) /* Granularity */ +#define REGIONSIZE_FINE 1 +#define REGIONSIZE_COARSE 0 +#define NSRI_NODEID_SHFT 8 +#define NSRI_NODEID_MASK (UINT64_CAST 0x1ff << 8)/* Node (Hub) ID */ +#define NSRI_REV_SHFT 4 +#define NSRI_REV_MASK (UINT64_CAST 0xf << 4) /* Chip Revision */ +#define NSRI_CHIPID_SHFT 0 +#define NSRI_CHIPID_MASK (UINT64_CAST 0xf) /* Chip type ID */ + +/* + * In fine mode, each node is a region. In coarse mode, there are + * eight nodes per region. + */ +#define NASID_TO_FINEREG_SHFT 0 +#define NASID_TO_COARSEREG_SHFT 3 + +/* NI_PORT_RESET mask definitions */ + +#define NPR_PORTRESET (UINT64_CAST 1 << 7) /* Send warm reset */ +#define NPR_LINKRESET (UINT64_CAST 1 << 1) /* Send link reset */ +#define NPR_LOCALRESET (UINT64_CAST 1) /* Reset entire hub */ + +/* NI_PROTECTION mask and shift definitions */ + +#define NPROT_RESETOK (UINT64_CAST 1) + +/* NI_GLOBAL_PARMS mask and shift definitions */ + +#define NGP_MAXRETRY_SHFT 48 /* Maximum retries */ +#define NGP_MAXRETRY_MASK (UINT64_CAST 0x3ff << 48) +#define NGP_TAILTOWRAP_SHFT 32 /* Tail timeout wrap */ +#define NGP_TAILTOWRAP_MASK (UINT64_CAST 0xffff << 32) + +#define NGP_CREDITTOVAL_SHFT 16 /* Tail timeout wrap */ +#define NGP_CREDITTOVAL_MASK (UINT64_CAST 0xf << 16) +#define NGP_TAILTOVAL_SHFT 4 /* Tail timeout value */ +#define NGP_TAILTOVAL_MASK (UINT64_CAST 0xf << 4) + +/* NI_DIAG_PARMS mask and shift definitions */ + +#define NDP_PORTTORESET (UINT64_CAST 1 << 18) /* Port tmout reset */ +#define NDP_LLP8BITMODE (UINT64_CAST 1 << 12) /* LLP 8-bit mode */ +#define NDP_PORTDISABLE (UINT64_CAST 1 << 6) /* Port disable */ +#define NDP_SENDERROR (UINT64_CAST 1) /* Send data error */ + +/* + * NI_VECTOR_PARMS mask and shift definitions. + * TYPE may be any of the first four PIOTYPEs defined under NI_VECTOR_STATUS. + */ + +#define NVP_PIOID_SHFT 40 +#define NVP_PIOID_MASK (UINT64_CAST 0x3ff << 40) +#define NVP_WRITEID_SHFT 32 +#define NVP_WRITEID_MASK (UINT64_CAST 0xff << 32) +#define NVP_ADDRESS_MASK (UINT64_CAST 0xffff8) /* Bits 19:3 */ +#define NVP_TYPE_SHFT 0 +#define NVP_TYPE_MASK (UINT64_CAST 0x3) + +/* NI_VECTOR_STATUS mask and shift definitions */ + +#define NVS_VALID (UINT64_CAST 1 << 63) +#define NVS_OVERRUN (UINT64_CAST 1 << 62) +#define NVS_TARGET_SHFT 51 +#define NVS_TARGET_MASK (UINT64_CAST 0x3ff << 51) +#define NVS_PIOID_SHFT 40 +#define NVS_PIOID_MASK (UINT64_CAST 0x3ff << 40) +#define NVS_WRITEID_SHFT 32 +#define NVS_WRITEID_MASK (UINT64_CAST 0xff << 32) +#define NVS_ADDRESS_MASK (UINT64_CAST 0xfffffff8) /* Bits 31:3 */ +#define NVS_TYPE_SHFT 0 +#define NVS_TYPE_MASK (UINT64_CAST 0x7) +#define NVS_ERROR_MASK (UINT64_CAST 0x4) /* bit set means error */ + + +#define PIOTYPE_READ 0 /* VECTOR_PARMS and VECTOR_STATUS */ +#define PIOTYPE_WRITE 1 /* VECTOR_PARMS and VECTOR_STATUS */ +#define PIOTYPE_UNDEFINED 2 /* VECTOR_PARMS and VECTOR_STATUS */ +#define PIOTYPE_EXCHANGE 3 /* VECTOR_PARMS and VECTOR_STATUS */ +#define PIOTYPE_ADDR_ERR 4 /* VECTOR_STATUS only */ +#define PIOTYPE_CMD_ERR 5 /* VECTOR_STATUS only */ +#define PIOTYPE_PROT_ERR 6 /* VECTOR_STATUS only */ +#define PIOTYPE_UNKNOWN 7 /* VECTOR_STATUS only */ + +/* NI_AGE_XXX mask and shift definitions */ + +#define NAGE_VCH_SHFT 10 +#define NAGE_VCH_MASK (UINT64_CAST 3 << 10) +#define NAGE_CC_SHFT 8 +#define NAGE_CC_MASK (UINT64_CAST 3 << 8) +#define NAGE_AGE_SHFT 0 +#define NAGE_AGE_MASK (UINT64_CAST 0xff) +#define NAGE_MASK (NAGE_VCH_MASK | NAGE_CC_MASK | NAGE_AGE_MASK) + +#define VCHANNEL_A 0 +#define VCHANNEL_B 1 +#define VCHANNEL_ANY 2 + +/* NI_PORT_PARMS mask and shift definitions */ + +#define NPP_NULLTO_SHFT 10 +#define NPP_NULLTO_MASK (UINT64_CAST 0x3f << 16) +#define NPP_MAXBURST_SHFT 0 +#define NPP_MAXBURST_MASK (UINT64_CAST 0x3ff) +#define NPP_RESET_DFLT_HUB20 ((UINT64_CAST 1 << NPP_NULLTO_SHFT) | \ + (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT)) +#define NPP_RESET_DEFAULTS ((UINT64_CAST 6 << NPP_NULLTO_SHFT) | \ + (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT)) + + +/* NI_PORT_ERROR mask and shift definitions */ + +#define NPE_LINKRESET (UINT64_CAST 1 << 37) +#define NPE_INTERNALERROR (UINT64_CAST 1 << 36) +#define NPE_BADMESSAGE (UINT64_CAST 1 << 35) +#define NPE_BADDEST (UINT64_CAST 1 << 34) +#define NPE_FIFOOVERFLOW (UINT64_CAST 1 << 33) +#define NPE_CREDITTO_SHFT 28 +#define NPE_CREDITTO_MASK (UINT64_CAST 0xf << 28) +#define NPE_TAILTO_SHFT 24 +#define NPE_TAILTO_MASK (UINT64_CAST 0xf << 24) +#define NPE_RETRYCOUNT_SHFT 16 +#define NPE_RETRYCOUNT_MASK (UINT64_CAST 0xff << 16) +#define NPE_CBERRCOUNT_SHFT 8 +#define NPE_CBERRCOUNT_MASK (UINT64_CAST 0xff << 8) +#define NPE_SNERRCOUNT_SHFT 0 +#define NPE_SNERRCOUNT_MASK (UINT64_CAST 0xff << 0) +#define NPE_MASK 0x3effffffff + +#define NPE_COUNT_MAX 0xff + +#define NPE_FATAL_ERRORS (NPE_LINKRESET | NPE_INTERNALERROR | \ + NPE_BADMESSAGE | NPE_BADDEST | \ + NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK | \ + NPE_TAILTO_MASK) + +/* NI_META_TABLE mask and shift definitions */ + +#define NMT_EXIT_PORT_MASK (UINT64_CAST 0xf) + +/* NI_LOCAL_TABLE mask and shift definitions */ + +#define NLT_EXIT_PORT_MASK (UINT64_CAST 0xf) + +#ifndef __ASSEMBLY__ + +typedef union hubni_port_error_u { + u64 nipe_reg_value; + struct { + u64 nipe_rsvd: 26, /* unused */ + nipe_lnk_reset: 1, /* link reset */ + nipe_intl_err: 1, /* internal error */ + nipe_bad_msg: 1, /* bad message */ + nipe_bad_dest: 1, /* bad dest */ + nipe_fifo_ovfl: 1, /* fifo overflow */ + nipe_rsvd1: 1, /* unused */ + nipe_credit_to: 4, /* credit timeout */ + nipe_tail_to: 4, /* tail timeout */ + nipe_retry_cnt: 8, /* retry error count */ + nipe_cb_cnt: 8, /* checkbit error count */ + nipe_sn_cnt: 8; /* sequence number count */ + } nipe_fields_s; +} hubni_port_error_t; + +#define NI_LLP_RETRY_MAX 0xff +#define NI_LLP_CB_MAX 0xff +#define NI_LLP_SN_MAX 0xff + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_SGI_SN0_HUBNI_H */ diff --git a/arch/mips/include/asm/sn/sn0/hubpi.h b/arch/mips/include/asm/sn/sn0/hubpi.h new file mode 100644 index 000000000000..e39f5f9da040 --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/hubpi.h @@ -0,0 +1,409 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX , revision 1.28. + * + * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SN_SN0_HUBPI_H +#define _ASM_SN_SN0_HUBPI_H + +#include + +/* + * Hub I/O interface registers + * + * All registers in this file are subject to change until Hub chip tapeout. + * All register "addresses" are actually offsets. Use the LOCAL_HUB + * or REMOTE_HUB macros to synthesize an actual address + */ + +#define PI_BASE 0x000000 + +/* General protection and control registers */ + +#define PI_CPU_PROTECT 0x000000 /* CPU Protection */ +#define PI_PROT_OVERRD 0x000008 /* Clear CPU Protection bit */ +#define PI_IO_PROTECT 0x000010 /* Interrupt Pending Protection */ +#define PI_REGION_PRESENT 0x000018 /* Indicates whether region exists */ +#define PI_CPU_NUM 0x000020 /* CPU Number ID */ +#define PI_CALIAS_SIZE 0x000028 /* Cached Alias Size */ +#define PI_MAX_CRB_TIMEOUT 0x000030 /* Maximum Timeout for CRB */ +#define PI_CRB_SFACTOR 0x000038 /* Scale factor for CRB timeout */ + +/* CALIAS values */ +#define PI_CALIAS_SIZE_0 0 +#define PI_CALIAS_SIZE_4K 1 +#define PI_CALIAS_SIZE_8K 2 +#define PI_CALIAS_SIZE_16K 3 +#define PI_CALIAS_SIZE_32K 4 +#define PI_CALIAS_SIZE_64K 5 +#define PI_CALIAS_SIZE_128K 6 +#define PI_CALIAS_SIZE_256K 7 +#define PI_CALIAS_SIZE_512K 8 +#define PI_CALIAS_SIZE_1M 9 +#define PI_CALIAS_SIZE_2M 10 +#define PI_CALIAS_SIZE_4M 11 +#define PI_CALIAS_SIZE_8M 12 +#define PI_CALIAS_SIZE_16M 13 +#define PI_CALIAS_SIZE_32M 14 +#define PI_CALIAS_SIZE_64M 15 + +/* Processor control and status checking */ + +#define PI_CPU_PRESENT_A 0x000040 /* CPU Present A */ +#define PI_CPU_PRESENT_B 0x000048 /* CPU Present B */ +#define PI_CPU_ENABLE_A 0x000050 /* CPU Enable A */ +#define PI_CPU_ENABLE_B 0x000058 /* CPU Enable B */ +#define PI_REPLY_LEVEL 0x000060 /* Reply Level */ +#define PI_HARDRESET_BIT 0x020068 /* Bit cleared by s/w on SR */ +#define PI_NMI_A 0x000070 /* NMI to CPU A */ +#define PI_NMI_B 0x000078 /* NMI to CPU B */ +#define PI_NMI_OFFSET (PI_NMI_B - PI_NMI_A) +#define PI_SOFTRESET 0x000080 /* Softreset (to both CPUs) */ + +/* Regular Interrupt register checking. */ + +#define PI_INT_PEND_MOD 0x000090 /* Write to set pending ints */ +#define PI_INT_PEND0 0x000098 /* Read to get pending ints */ +#define PI_INT_PEND1 0x0000a0 /* Read to get pending ints */ +#define PI_INT_MASK0_A 0x0000a8 /* Interrupt Mask 0 for CPU A */ +#define PI_INT_MASK1_A 0x0000b0 /* Interrupt Mask 1 for CPU A */ +#define PI_INT_MASK0_B 0x0000b8 /* Interrupt Mask 0 for CPU B */ +#define PI_INT_MASK1_B 0x0000c0 /* Interrupt Mask 1 for CPU B */ + +#define PI_INT_MASK_OFFSET 0x10 /* Offset from A to B */ + +/* Crosscall interrupts */ + +#define PI_CC_PEND_SET_A 0x0000c8 /* CC Interrupt Pending Set, CPU A */ +#define PI_CC_PEND_SET_B 0x0000d0 /* CC Interrupt Pending Set, CPU B */ +#define PI_CC_PEND_CLR_A 0x0000d8 /* CC Interrupt Pending Clr, CPU A */ +#define PI_CC_PEND_CLR_B 0x0000e0 /* CC Interrupt Pending Clr, CPU B */ +#define PI_CC_MASK 0x0000e8 /* CC Interrupt mask */ + +#define PI_INT_SET_OFFSET 0x08 /* Offset from A to B */ + +/* Realtime Counter and Profiler control registers */ + +#define PI_RT_COUNT 0x030100 /* Real Time Counter */ +#define PI_RT_COMPARE_A 0x000108 /* Real Time Compare A */ +#define PI_RT_COMPARE_B 0x000110 /* Real Time Compare B */ +#define PI_PROFILE_COMPARE 0x000118 /* L5 int to both cpus when == RTC */ +#define PI_RT_PEND_A 0x000120 /* Set if RT int for A pending */ +#define PI_RT_PEND_B 0x000128 /* Set if RT int for B pending */ +#define PI_PROF_PEND_A 0x000130 /* Set if Prof int for A pending */ +#define PI_PROF_PEND_B 0x000138 /* Set if Prof int for B pending */ +#define PI_RT_EN_A 0x000140 /* RT int for CPU A enable */ +#define PI_RT_EN_B 0x000148 /* RT int for CPU B enable */ +#define PI_PROF_EN_A 0x000150 /* PROF int for CPU A enable */ +#define PI_PROF_EN_B 0x000158 /* PROF int for CPU B enable */ +#define PI_RT_LOCAL_CTRL 0x000160 /* RT control register */ +#define PI_RT_FILTER_CTRL 0x000168 /* GCLK Filter control register */ + +#define PI_COUNT_OFFSET 0x08 /* A to B offset for all counts */ + +/* Built-In Self Test support */ + +#define PI_BIST_WRITE_DATA 0x000200 /* BIST write data */ +#define PI_BIST_READ_DATA 0x000208 /* BIST read data */ +#define PI_BIST_COUNT_TARG 0x000210 /* BIST Count and Target */ +#define PI_BIST_READY 0x000218 /* BIST Ready indicator */ +#define PI_BIST_SHIFT_LOAD 0x000220 /* BIST control */ +#define PI_BIST_SHIFT_UNLOAD 0x000228 /* BIST control */ +#define PI_BIST_ENTER_RUN 0x000230 /* BIST control */ + +/* Graphics control registers */ + +#define PI_GFX_PAGE_A 0x000300 /* Graphics page A */ +#define PI_GFX_CREDIT_CNTR_A 0x000308 /* Graphics credit counter A */ +#define PI_GFX_BIAS_A 0x000310 /* Graphics bias A */ +#define PI_GFX_INT_CNTR_A 0x000318 /* Graphics interrupt counter A */ +#define PI_GFX_INT_CMP_A 0x000320 /* Graphics interrupt comparator A */ +#define PI_GFX_PAGE_B 0x000328 /* Graphics page B */ +#define PI_GFX_CREDIT_CNTR_B 0x000330 /* Graphics credit counter B */ +#define PI_GFX_BIAS_B 0x000338 /* Graphics bias B */ +#define PI_GFX_INT_CNTR_B 0x000340 /* Graphics interrupt counter B */ +#define PI_GFX_INT_CMP_B 0x000348 /* Graphics interrupt comparator B */ + +#define PI_GFX_OFFSET (PI_GFX_PAGE_B - PI_GFX_PAGE_A) +#define PI_GFX_PAGE_ENABLE 0x0000010000000000LL + +/* Error and timeout registers */ +#define PI_ERR_INT_PEND 0x000400 /* Error Interrupt Pending */ +#define PI_ERR_INT_MASK_A 0x000408 /* Error Interrupt mask for CPU A */ +#define PI_ERR_INT_MASK_B 0x000410 /* Error Interrupt mask for CPU B */ +#define PI_ERR_STACK_ADDR_A 0x000418 /* Error stack address for CPU A */ +#define PI_ERR_STACK_ADDR_B 0x000420 /* Error stack address for CPU B */ +#define PI_ERR_STACK_SIZE 0x000428 /* Error Stack Size */ +#define PI_ERR_STATUS0_A 0x000430 /* Error Status 0A */ +#define PI_ERR_STATUS0_A_RCLR 0x000438 /* Error Status 0A clear on read */ +#define PI_ERR_STATUS1_A 0x000440 /* Error Status 1A */ +#define PI_ERR_STATUS1_A_RCLR 0x000448 /* Error Status 1A clear on read */ +#define PI_ERR_STATUS0_B 0x000450 /* Error Status 0B */ +#define PI_ERR_STATUS0_B_RCLR 0x000458 /* Error Status 0B clear on read */ +#define PI_ERR_STATUS1_B 0x000460 /* Error Status 1B */ +#define PI_ERR_STATUS1_B_RCLR 0x000468 /* Error Status 1B clear on read */ +#define PI_SPOOL_CMP_A 0x000470 /* Spool compare for CPU A */ +#define PI_SPOOL_CMP_B 0x000478 /* Spool compare for CPU B */ +#define PI_CRB_TIMEOUT_A 0x000480 /* Timed out CRB entries for A */ +#define PI_CRB_TIMEOUT_B 0x000488 /* Timed out CRB entries for B */ +#define PI_SYSAD_ERRCHK_EN 0x000490 /* Enables SYSAD error checking */ +#define PI_BAD_CHECK_BIT_A 0x000498 /* Force SYSAD check bit error */ +#define PI_BAD_CHECK_BIT_B 0x0004a0 /* Force SYSAD check bit error */ +#define PI_NACK_CNT_A 0x0004a8 /* Consecutive NACK counter */ +#define PI_NACK_CNT_B 0x0004b0 /* " " for CPU B */ +#define PI_NACK_CMP 0x0004b8 /* NACK count compare */ +#define PI_STACKADDR_OFFSET (PI_ERR_STACK_ADDR_B - PI_ERR_STACK_ADDR_A) +#define PI_ERRSTAT_OFFSET (PI_ERR_STATUS0_B - PI_ERR_STATUS0_A) +#define PI_RDCLR_OFFSET (PI_ERR_STATUS0_A_RCLR - PI_ERR_STATUS0_A) + +/* Bits in PI_ERR_INT_PEND */ +#define PI_ERR_SPOOL_CMP_B 0x00000001 /* Spool end hit high water */ +#define PI_ERR_SPOOL_CMP_A 0x00000002 +#define PI_ERR_SPUR_MSG_B 0x00000004 /* Spurious message intr. */ +#define PI_ERR_SPUR_MSG_A 0x00000008 +#define PI_ERR_WRB_TERR_B 0x00000010 /* WRB TERR */ +#define PI_ERR_WRB_TERR_A 0x00000020 +#define PI_ERR_WRB_WERR_B 0x00000040 /* WRB WERR */ +#define PI_ERR_WRB_WERR_A 0x00000080 +#define PI_ERR_SYSSTATE_B 0x00000100 /* SysState parity error */ +#define PI_ERR_SYSSTATE_A 0x00000200 +#define PI_ERR_SYSAD_DATA_B 0x00000400 /* SysAD data parity error */ +#define PI_ERR_SYSAD_DATA_A 0x00000800 +#define PI_ERR_SYSAD_ADDR_B 0x00001000 /* SysAD addr parity error */ +#define PI_ERR_SYSAD_ADDR_A 0x00002000 +#define PI_ERR_SYSCMD_DATA_B 0x00004000 /* SysCmd data parity error */ +#define PI_ERR_SYSCMD_DATA_A 0x00008000 +#define PI_ERR_SYSCMD_ADDR_B 0x00010000 /* SysCmd addr parity error */ +#define PI_ERR_SYSCMD_ADDR_A 0x00020000 +#define PI_ERR_BAD_SPOOL_B 0x00040000 /* Error spooling to memory */ +#define PI_ERR_BAD_SPOOL_A 0x00080000 +#define PI_ERR_UNCAC_UNCORR_B 0x00100000 /* Uncached uncorrectable */ +#define PI_ERR_UNCAC_UNCORR_A 0x00200000 +#define PI_ERR_SYSSTATE_TAG_B 0x00400000 /* SysState tag parity error */ +#define PI_ERR_SYSSTATE_TAG_A 0x00800000 +#define PI_ERR_MD_UNCORR 0x01000000 /* Must be cleared in MD */ + +#define PI_ERR_CLEAR_ALL_A 0x00aaaaaa +#define PI_ERR_CLEAR_ALL_B 0x00555555 + + +/* + * The following three macros define all possible error int pends. + */ + +#define PI_FATAL_ERR_CPU_A (PI_ERR_SYSSTATE_TAG_A | \ + PI_ERR_BAD_SPOOL_A | \ + PI_ERR_SYSCMD_ADDR_A | \ + PI_ERR_SYSCMD_DATA_A | \ + PI_ERR_SYSAD_ADDR_A | \ + PI_ERR_SYSAD_DATA_A | \ + PI_ERR_SYSSTATE_A) + +#define PI_MISC_ERR_CPU_A (PI_ERR_UNCAC_UNCORR_A | \ + PI_ERR_WRB_WERR_A | \ + PI_ERR_WRB_TERR_A | \ + PI_ERR_SPUR_MSG_A | \ + PI_ERR_SPOOL_CMP_A) + +#define PI_FATAL_ERR_CPU_B (PI_ERR_SYSSTATE_TAG_B | \ + PI_ERR_BAD_SPOOL_B | \ + PI_ERR_SYSCMD_ADDR_B | \ + PI_ERR_SYSCMD_DATA_B | \ + PI_ERR_SYSAD_ADDR_B | \ + PI_ERR_SYSAD_DATA_B | \ + PI_ERR_SYSSTATE_B) + +#define PI_MISC_ERR_CPU_B (PI_ERR_UNCAC_UNCORR_B | \ + PI_ERR_WRB_WERR_B | \ + PI_ERR_WRB_TERR_B | \ + PI_ERR_SPUR_MSG_B | \ + PI_ERR_SPOOL_CMP_B) + +#define PI_ERR_GENERIC (PI_ERR_MD_UNCORR) + +/* + * Error types for PI_ERR_STATUS0_[AB] and error stack: + * Use the write types if WRBRRB is 1 else use the read types + */ + +/* Fields in PI_ERR_STATUS0_[AB] */ +#define PI_ERR_ST0_TYPE_MASK 0x0000000000000007 +#define PI_ERR_ST0_TYPE_SHFT 0 +#define PI_ERR_ST0_REQNUM_MASK 0x0000000000000038 +#define PI_ERR_ST0_REQNUM_SHFT 3 +#define PI_ERR_ST0_SUPPL_MASK 0x000000000001ffc0 +#define PI_ERR_ST0_SUPPL_SHFT 6 +#define PI_ERR_ST0_CMD_MASK 0x0000000001fe0000 +#define PI_ERR_ST0_CMD_SHFT 17 +#define PI_ERR_ST0_ADDR_MASK 0x3ffffffffe000000 +#define PI_ERR_ST0_ADDR_SHFT 25 +#define PI_ERR_ST0_OVERRUN_MASK 0x4000000000000000 +#define PI_ERR_ST0_OVERRUN_SHFT 62 +#define PI_ERR_ST0_VALID_MASK 0x8000000000000000 +#define PI_ERR_ST0_VALID_SHFT 63 + +/* Fields in PI_ERR_STATUS1_[AB] */ +#define PI_ERR_ST1_SPOOL_MASK 0x00000000001fffff +#define PI_ERR_ST1_SPOOL_SHFT 0 +#define PI_ERR_ST1_TOUTCNT_MASK 0x000000001fe00000 +#define PI_ERR_ST1_TOUTCNT_SHFT 21 +#define PI_ERR_ST1_INVCNT_MASK 0x0000007fe0000000 +#define PI_ERR_ST1_INVCNT_SHFT 29 +#define PI_ERR_ST1_CRBNUM_MASK 0x0000038000000000 +#define PI_ERR_ST1_CRBNUM_SHFT 39 +#define PI_ERR_ST1_WRBRRB_MASK 0x0000040000000000 +#define PI_ERR_ST1_WRBRRB_SHFT 42 +#define PI_ERR_ST1_CRBSTAT_MASK 0x001ff80000000000 +#define PI_ERR_ST1_CRBSTAT_SHFT 43 +#define PI_ERR_ST1_MSGSRC_MASK 0xffe0000000000000 +#define PI_ERR_ST1_MSGSRC_SHFT 53 + +/* Fields in the error stack */ +#define PI_ERR_STK_TYPE_MASK 0x0000000000000003 +#define PI_ERR_STK_TYPE_SHFT 0 +#define PI_ERR_STK_SUPPL_MASK 0x0000000000000038 +#define PI_ERR_STK_SUPPL_SHFT 3 +#define PI_ERR_STK_REQNUM_MASK 0x00000000000001c0 +#define PI_ERR_STK_REQNUM_SHFT 6 +#define PI_ERR_STK_CRBNUM_MASK 0x0000000000000e00 +#define PI_ERR_STK_CRBNUM_SHFT 9 +#define PI_ERR_STK_WRBRRB_MASK 0x0000000000001000 +#define PI_ERR_STK_WRBRRB_SHFT 12 +#define PI_ERR_STK_CRBSTAT_MASK 0x00000000007fe000 +#define PI_ERR_STK_CRBSTAT_SHFT 13 +#define PI_ERR_STK_CMD_MASK 0x000000007f800000 +#define PI_ERR_STK_CMD_SHFT 23 +#define PI_ERR_STK_ADDR_MASK 0xffffffff80000000 +#define PI_ERR_STK_ADDR_SHFT 31 + +/* Error type in the error status or stack on Read CRBs */ +#define PI_ERR_RD_PRERR 1 +#define PI_ERR_RD_DERR 2 +#define PI_ERR_RD_TERR 3 + +/* Error type in the error status or stack on Write CRBs */ +#define PI_ERR_WR_WERR 0 +#define PI_ERR_WR_PWERR 1 +#define PI_ERR_WR_TERR 3 + +/* Read or Write CRB in error status or stack */ +#define PI_ERR_RRB 0 +#define PI_ERR_WRB 1 +#define PI_ERR_ANY_CRB 2 + +/* Address masks in the error status and error stack are not the same */ +#define ERR_STK_ADDR_SHFT 7 +#define ERR_STAT0_ADDR_SHFT 3 + +#define PI_MIN_STACK_SIZE 4096 /* For figuring out the size to set */ +#define PI_STACK_SIZE_SHFT 12 /* 4k */ + +#define ERR_STACK_SIZE_BYTES(_sz) \ + ((_sz) ? (PI_MIN_STACK_SIZE << ((_sz) - 1)) : 0) + +#ifndef __ASSEMBLY__ +/* + * format of error stack and error status registers. + */ + +struct err_stack_format { + u64 sk_addr : 33, /* address */ + sk_cmd : 8, /* message command */ + sk_crb_sts : 10, /* status from RRB or WRB */ + sk_rw_rb : 1, /* RRB == 0, WRB == 1 */ + sk_crb_num : 3, /* WRB (0 to 7) or RRB (0 to 4) */ + sk_t5_req : 3, /* RRB T5 request number */ + sk_suppl : 3, /* lowest 3 bit of supplemental */ + sk_err_type: 3; /* error type */ +}; + +typedef union pi_err_stack { + u64 pi_stk_word; + struct err_stack_format pi_stk_fmt; +} pi_err_stack_t; + +struct err_status0_format { + u64 s0_valid : 1, /* Valid */ + s0_ovr_run : 1, /* Overrun, spooled to memory */ + s0_addr : 37, /* address */ + s0_cmd : 8, /* message command */ + s0_supl : 11, /* message supplemental field */ + s0_t5_req : 3, /* RRB T5 request number */ + s0_err_type: 3; /* error type */ +}; + +typedef union pi_err_stat0 { + u64 pi_stat0_word; + struct err_status0_format pi_stat0_fmt; +} pi_err_stat0_t; + +struct err_status1_format { + u64 s1_src : 11, /* message source */ + s1_crb_sts : 10, /* status from RRB or WRB */ + s1_rw_rb : 1, /* RRB == 0, WRB == 1 */ + s1_crb_num : 3, /* WRB (0 to 7) or RRB (0 to 4) */ + s1_inval_cnt:10, /* signed invalidate counter RRB */ + s1_to_cnt : 8, /* crb timeout counter */ + s1_spl_cnt : 21; /* number spooled to memory */ +}; + +typedef union pi_err_stat1 { + u64 pi_stat1_word; + struct err_status1_format pi_stat1_fmt; +} pi_err_stat1_t; + +typedef u64 rtc_time_t; + +#endif /* !__ASSEMBLY__ */ + + +/* Bits in PI_SYSAD_ERRCHK_EN */ +#define PI_SYSAD_ERRCHK_ECCGEN 0x01 /* Enable ECC generation */ +#define PI_SYSAD_ERRCHK_QUALGEN 0x02 /* Enable data quality signal gen. */ +#define PI_SYSAD_ERRCHK_SADP 0x04 /* Enable SysAD parity checking */ +#define PI_SYSAD_ERRCHK_CMDP 0x08 /* Enable SysCmd parity checking */ +#define PI_SYSAD_ERRCHK_STATE 0x10 /* Enable SysState parity checking */ +#define PI_SYSAD_ERRCHK_QUAL 0x20 /* Enable data quality checking */ +#define PI_SYSAD_CHECK_ALL 0x3f /* Generate and check all signals. */ + +/* Interrupt pending bits on R10000 */ + +#define HUB_IP_PEND0 0x0400 +#define HUB_IP_PEND1_CC 0x0800 +#define HUB_IP_RT 0x1000 +#define HUB_IP_PROF 0x2000 +#define HUB_IP_ERROR 0x4000 +#define HUB_IP_MASK 0x7c00 + +/* PI_RT_LOCAL_CTRL mask and shift definitions */ + +#define PRLC_USE_INT_SHFT 16 +#define PRLC_USE_INT_MASK (UINT64_CAST 1 << 16) +#define PRLC_USE_INT (UINT64_CAST 1 << 16) +#define PRLC_GCLK_SHFT 15 +#define PRLC_GCLK_MASK (UINT64_CAST 1 << 15) +#define PRLC_GCLK (UINT64_CAST 1 << 15) +#define PRLC_GCLK_COUNT_SHFT 8 +#define PRLC_GCLK_COUNT_MASK (UINT64_CAST 0x7f << 8) +#define PRLC_MAX_COUNT_SHFT 1 +#define PRLC_MAX_COUNT_MASK (UINT64_CAST 0x7f << 1) +#define PRLC_GCLK_EN_SHFT 0 +#define PRLC_GCLK_EN_MASK (UINT64_CAST 1) +#define PRLC_GCLK_EN (UINT64_CAST 1) + +/* PI_RT_FILTER_CTRL mask and shift definitions */ + +/* + * Bits for NACK_CNT_A/B and NACK_CMP + */ +#define PI_NACK_CNT_EN_SHFT 20 +#define PI_NACK_CNT_EN_MASK 0x100000 +#define PI_NACK_CNT_MASK 0x0fffff +#define PI_NACK_CNT_MAX 0x0fffff + +#endif /* _ASM_SN_SN0_HUBPI_H */ diff --git a/arch/mips/include/asm/sn/sn0/ip27.h b/arch/mips/include/asm/sn/sn0/ip27.h new file mode 100644 index 000000000000..3c97e0855c8d --- /dev/null +++ b/arch/mips/include/asm/sn/sn0/ip27.h @@ -0,0 +1,85 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from IRIX . + * + * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. + * Copyright (C) 1999, 2006 by Ralf Baechle + */ +#ifndef _ASM_SN_SN0_IP27_H +#define _ASM_SN_SN0_IP27_H + +#include + +/* + * Simple definitions for the masks which remove SW bits from pte. + */ + +#define TLBLO_HWBITSHIFT 0 /* Shift value, for masking */ + +#ifndef __ASSEMBLY__ + +#define CAUSE_BERRINTR IE_IRQ5 + +#define ECCF_CACHE_ERR 0 +#define ECCF_TAGLO 1 +#define ECCF_ECC 2 +#define ECCF_ERROREPC 3 +#define ECCF_PADDR 4 +#define ECCF_SIZE (5 * sizeof(long)) + +#endif /* !__ASSEMBLY__ */ + +#ifdef __ASSEMBLY__ + +/* + * KL_GET_CPUNUM (similar to EV_GET_SPNUM for EVEREST platform) reads + * the processor number of the calling processor. The proc parameters + * must be a register. + */ +#define KL_GET_CPUNUM(proc) \ + dli proc, LOCAL_HUB(0); \ + ld proc, PI_CPU_NUM(proc) + +#endif /* __ASSEMBLY__ */ + +/* + * R10000 status register interrupt bit mask usage for IP27. + */ +#define SRB_SWTIMO IE_SW0 /* 0x0100 */ +#define SRB_NET IE_SW1 /* 0x0200 */ +#define SRB_DEV0 IE_IRQ0 /* 0x0400 */ +#define SRB_DEV1 IE_IRQ1 /* 0x0800 */ +#define SRB_TIMOCLK IE_IRQ2 /* 0x1000 */ +#define SRB_PROFCLK IE_IRQ3 /* 0x2000 */ +#define SRB_ERR IE_IRQ4 /* 0x4000 */ +#define SRB_SCHEDCLK IE_IRQ5 /* 0x8000 */ + +#define SR_IBIT_HI SRB_DEV0 +#define SR_IBIT_PROF SRB_PROFCLK + +#define SRB_SWTIMO_IDX 0 +#define SRB_NET_IDX 1 +#define SRB_DEV0_IDX 2 +#define SRB_DEV1_IDX 3 +#define SRB_TIMOCLK_IDX 4 +#define SRB_PROFCLK_IDX 5 +#define SRB_ERR_IDX 6 +#define SRB_SCHEDCLK_IDX 7 + +#define NUM_CAUSE_INTRS 8 + +#define SCACHE_LINESIZE 128 +#define SCACHE_LINEMASK (SCACHE_LINESIZE - 1) + +#include + +#define LED_CYCLE_MASK 0x0f +#define LED_CYCLE_SHFT 4 + +#define SEND_NMI(_nasid, _slice) \ + REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1) + +#endif /* _ASM_SN_SN0_IP27_H */ diff --git a/arch/mips/include/asm/sn/sn_private.h b/arch/mips/include/asm/sn/sn_private.h new file mode 100644 index 000000000000..1a2c3025bf28 --- /dev/null +++ b/arch/mips/include/asm/sn/sn_private.h @@ -0,0 +1,19 @@ +#ifndef __ASM_SN_SN_PRIVATE_H +#define __ASM_SN_SN_PRIVATE_H + +#include + +extern nasid_t master_nasid; + +extern void cpu_node_probe(void); +extern cnodeid_t get_compact_nodeid(void); +extern void hub_rtc_init(cnodeid_t); +extern void cpu_time_init(void); +extern void per_cpu_init(void); +extern void install_cpu_nmi_handler(int slice); +extern void install_ipi(void); +extern void setup_replication_mask(void); +extern void replicate_kernel_text(void); +extern pfn_t node_getfirstfree(cnodeid_t); + +#endif /* __ASM_SN_SN_PRIVATE_H */ diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h new file mode 100644 index 000000000000..74d0bb260b86 --- /dev/null +++ b/arch/mips/include/asm/sn/types.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 1999 by Ralf Baechle + */ +#ifndef _ASM_SN_TYPES_H +#define _ASM_SN_TYPES_H + +#include + +typedef unsigned long cpuid_t; +typedef unsigned long cnodemask_t; +typedef signed short nasid_t; /* node id in numa-as-id space */ +typedef signed short cnodeid_t; /* node id in compact-id space */ +typedef signed char partid_t; /* partition ID type */ +typedef signed short moduleid_t; /* user-visible module number type */ +typedef signed short cmoduleid_t; /* kernel compact module id type */ +typedef unsigned char clusterid_t; /* Clusterid of the cell */ +typedef unsigned long pfn_t; + +typedef dev_t vertex_hdl_t; /* hardware graph vertex handle */ + +#endif /* _ASM_SN_TYPES_H */ diff --git a/arch/mips/include/asm/sni.h b/arch/mips/include/asm/sni.h new file mode 100644 index 000000000000..8c1eb02c6d16 --- /dev/null +++ b/arch/mips/include/asm/sni.h @@ -0,0 +1,244 @@ +/* + * SNI specific definitions + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 1998 by Ralf Baechle + * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + */ +#ifndef __ASM_SNI_H +#define __ASM_SNI_H + +extern unsigned int sni_brd_type; + +#define SNI_BRD_10 2 +#define SNI_BRD_10NEW 3 +#define SNI_BRD_TOWER_OASIC 4 +#define SNI_BRD_MINITOWER 5 +#define SNI_BRD_PCI_TOWER 6 +#define SNI_BRD_RM200 7 +#define SNI_BRD_PCI_MTOWER 8 +#define SNI_BRD_PCI_DESKTOP 9 +#define SNI_BRD_PCI_TOWER_CPLUS 10 +#define SNI_BRD_PCI_MTOWER_CPLUS 11 + +/* RM400 cpu types */ +#define SNI_CPU_M8021 0x01 +#define SNI_CPU_M8030 0x04 +#define SNI_CPU_M8031 0x06 +#define SNI_CPU_M8034 0x0f +#define SNI_CPU_M8037 0x07 +#define SNI_CPU_M8040 0x05 +#define SNI_CPU_M8043 0x09 +#define SNI_CPU_M8050 0x0b +#define SNI_CPU_M8053 0x0d + +#define SNI_PORT_BASE CKSEG1ADDR(0xb4000000) + +#ifndef __MIPSEL__ +/* + * ASIC PCI registers for big endian configuration. + */ +#define PCIMT_UCONF CKSEG1ADDR(0xbfff0004) +#define PCIMT_IOADTIMEOUT2 CKSEG1ADDR(0xbfff000c) +#define PCIMT_IOMEMCONF CKSEG1ADDR(0xbfff0014) +#define PCIMT_IOMMU CKSEG1ADDR(0xbfff001c) +#define PCIMT_IOADTIMEOUT1 CKSEG1ADDR(0xbfff0024) +#define PCIMT_DMAACCESS CKSEG1ADDR(0xbfff002c) +#define PCIMT_DMAHIT CKSEG1ADDR(0xbfff0034) +#define PCIMT_ERRSTATUS CKSEG1ADDR(0xbfff003c) +#define PCIMT_ERRADDR CKSEG1ADDR(0xbfff0044) +#define PCIMT_SYNDROME CKSEG1ADDR(0xbfff004c) +#define PCIMT_ITPEND CKSEG1ADDR(0xbfff0054) +#define IT_INT2 0x01 +#define IT_INTD 0x02 +#define IT_INTC 0x04 +#define IT_INTB 0x08 +#define IT_INTA 0x10 +#define IT_EISA 0x20 +#define IT_SCSI 0x40 +#define IT_ETH 0x80 +#define PCIMT_IRQSEL CKSEG1ADDR(0xbfff005c) +#define PCIMT_TESTMEM CKSEG1ADDR(0xbfff0064) +#define PCIMT_ECCREG CKSEG1ADDR(0xbfff006c) +#define PCIMT_CONFIG_ADDRESS CKSEG1ADDR(0xbfff0074) +#define PCIMT_ASIC_ID CKSEG1ADDR(0xbfff007c) /* read */ +#define PCIMT_SOFT_RESET CKSEG1ADDR(0xbfff007c) /* write */ +#define PCIMT_PIA_OE CKSEG1ADDR(0xbfff0084) +#define PCIMT_PIA_DATAOUT CKSEG1ADDR(0xbfff008c) +#define PCIMT_PIA_DATAIN CKSEG1ADDR(0xbfff0094) +#define PCIMT_CACHECONF CKSEG1ADDR(0xbfff009c) +#define PCIMT_INVSPACE CKSEG1ADDR(0xbfff00a4) +#else +/* + * ASIC PCI registers for little endian configuration. + */ +#define PCIMT_UCONF CKSEG1ADDR(0xbfff0000) +#define PCIMT_IOADTIMEOUT2 CKSEG1ADDR(0xbfff0008) +#define PCIMT_IOMEMCONF CKSEG1ADDR(0xbfff0010) +#define PCIMT_IOMMU CKSEG1ADDR(0xbfff0018) +#define PCIMT_IOADTIMEOUT1 CKSEG1ADDR(0xbfff0020) +#define PCIMT_DMAACCESS CKSEG1ADDR(0xbfff0028) +#define PCIMT_DMAHIT CKSEG1ADDR(0xbfff0030) +#define PCIMT_ERRSTATUS CKSEG1ADDR(0xbfff0038) +#define PCIMT_ERRADDR CKSEG1ADDR(0xbfff0040) +#define PCIMT_SYNDROME CKSEG1ADDR(0xbfff0048) +#define PCIMT_ITPEND CKSEG1ADDR(0xbfff0050) +#define IT_INT2 0x01 +#define IT_INTD 0x02 +#define IT_INTC 0x04 +#define IT_INTB 0x08 +#define IT_INTA 0x10 +#define IT_EISA 0x20 +#define IT_SCSI 0x40 +#define IT_ETH 0x80 +#define PCIMT_IRQSEL CKSEG1ADDR(0xbfff0058) +#define PCIMT_TESTMEM CKSEG1ADDR(0xbfff0060) +#define PCIMT_ECCREG CKSEG1ADDR(0xbfff0068) +#define PCIMT_CONFIG_ADDRESS CKSEG1ADDR(0xbfff0070) +#define PCIMT_ASIC_ID CKSEG1ADDR(0xbfff0078) /* read */ +#define PCIMT_SOFT_RESET CKSEG1ADDR(0xbfff0078) /* write */ +#define PCIMT_PIA_OE CKSEG1ADDR(0xbfff0080) +#define PCIMT_PIA_DATAOUT CKSEG1ADDR(0xbfff0088) +#define PCIMT_PIA_DATAIN CKSEG1ADDR(0xbfff0090) +#define PCIMT_CACHECONF CKSEG1ADDR(0xbfff0098) +#define PCIMT_INVSPACE CKSEG1ADDR(0xbfff00a0) +#endif + +#define PCIMT_PCI_CONF CKSEG1ADDR(0xbfff0100) + +/* + * Data port for the PCI bus in IO space + */ +#define PCIMT_CONFIG_DATA 0x0cfc + +/* + * Board specific registers + */ +#define PCIMT_CSMSR CKSEG1ADDR(0xbfd00000) +#define PCIMT_CSSWITCH CKSEG1ADDR(0xbfd10000) +#define PCIMT_CSITPEND CKSEG1ADDR(0xbfd20000) +#define PCIMT_AUTO_PO_EN CKSEG1ADDR(0xbfd30000) +#define PCIMT_CLR_TEMP CKSEG1ADDR(0xbfd40000) +#define PCIMT_AUTO_PO_DIS CKSEG1ADDR(0xbfd50000) +#define PCIMT_EXMSR CKSEG1ADDR(0xbfd60000) +#define PCIMT_UNUSED1 CKSEG1ADDR(0xbfd70000) +#define PCIMT_CSWCSM CKSEG1ADDR(0xbfd80000) +#define PCIMT_UNUSED2 CKSEG1ADDR(0xbfd90000) +#define PCIMT_CSLED CKSEG1ADDR(0xbfda0000) +#define PCIMT_CSMAPISA CKSEG1ADDR(0xbfdb0000) +#define PCIMT_CSRSTBP CKSEG1ADDR(0xbfdc0000) +#define PCIMT_CLRPOFF CKSEG1ADDR(0xbfdd0000) +#define PCIMT_CSTIMER CKSEG1ADDR(0xbfde0000) +#define PCIMT_PWDN CKSEG1ADDR(0xbfdf0000) + +/* + * A20R based boards + */ +#define A20R_PT_CLOCK_BASE CKSEG1ADDR(0xbc040000) +#define A20R_PT_TIM0_ACK CKSEG1ADDR(0xbc050000) +#define A20R_PT_TIM1_ACK CKSEG1ADDR(0xbc060000) + +#define SNI_A20R_IRQ_BASE MIPS_CPU_IRQ_BASE +#define SNI_A20R_IRQ_TIMER (SNI_A20R_IRQ_BASE+5) + +#define SNI_PCIT_INT_REG CKSEG1ADDR(0xbfff000c) + +#define SNI_PCIT_INT_START 24 +#define SNI_PCIT_INT_END 30 + +#define PCIT_IRQ_ETHERNET (MIPS_CPU_IRQ_BASE + 5) +#define PCIT_IRQ_INTA (SNI_PCIT_INT_START + 0) +#define PCIT_IRQ_INTB (SNI_PCIT_INT_START + 1) +#define PCIT_IRQ_INTC (SNI_PCIT_INT_START + 2) +#define PCIT_IRQ_INTD (SNI_PCIT_INT_START + 3) +#define PCIT_IRQ_SCSI0 (SNI_PCIT_INT_START + 4) +#define PCIT_IRQ_SCSI1 (SNI_PCIT_INT_START + 5) + + +/* + * Interrupt 0-16 are EISA interrupts. Interrupts from 16 on are assigned + * to the other interrupts generated by ASIC PCI. + * + * INT2 is a wired-or of the push button interrupt, high temperature interrupt + * ASIC PCI interrupt. + */ +#define PCIMT_KEYBOARD_IRQ 1 +#define PCIMT_IRQ_INT2 24 +#define PCIMT_IRQ_INTD 25 +#define PCIMT_IRQ_INTC 26 +#define PCIMT_IRQ_INTB 27 +#define PCIMT_IRQ_INTA 28 +#define PCIMT_IRQ_EISA 29 +#define PCIMT_IRQ_SCSI 30 + +#define PCIMT_IRQ_ETHERNET (MIPS_CPU_IRQ_BASE+6) + +#if 0 +#define PCIMT_IRQ_TEMPERATURE 24 +#define PCIMT_IRQ_EISA_NMI 25 +#define PCIMT_IRQ_POWER_OFF 26 +#define PCIMT_IRQ_BUTTON 27 +#endif + +/* + * Base address for the mapped 16mb EISA bus segment. + */ +#define PCIMT_EISA_BASE CKSEG1ADDR(0xb0000000) + +/* PCI EISA Interrupt acknowledge */ +#define PCIMT_INT_ACKNOWLEDGE CKSEG1ADDR(0xba000000) + +/* + * SNI ID PROM + * + * SNI_IDPROM_MEMSIZE Memsize in 16MB quantities + * SNI_IDPROM_BRDTYPE Board Type + * SNI_IDPROM_CPUTYPE CPU Type on RM400 + */ +#ifdef CONFIG_CPU_BIG_ENDIAN +#define __SNI_END 0 +#endif +#ifdef CONFIG_CPU_LITTLE_ENDIAN +#define __SNI_END 3 +#endif +#define SNI_IDPROM_BASE CKSEG1ADDR(0x1ff00000) +#define SNI_IDPROM_MEMSIZE (SNI_IDPROM_BASE + (0x28 ^ __SNI_END)) +#define SNI_IDPROM_BRDTYPE (SNI_IDPROM_BASE + (0x29 ^ __SNI_END)) +#define SNI_IDPROM_CPUTYPE (SNI_IDPROM_BASE + (0x30 ^ __SNI_END)) + +#define SNI_IDPROM_SIZE 0x1000 + +/* board specific init functions */ +extern void sni_a20r_init(void); +extern void sni_pcit_init(void); +extern void sni_rm200_init(void); +extern void sni_pcimt_init(void); + +/* board specific irq init functions */ +extern void sni_a20r_irq_init(void); +extern void sni_pcit_irq_init(void); +extern void sni_pcit_cplus_irq_init(void); +extern void sni_rm200_irq_init(void); +extern void sni_pcimt_irq_init(void); + +/* timer inits */ +extern void sni_cpu_time_init(void); + +/* eisa init for RM200/400 */ +#ifdef CONFIG_EISA +extern int sni_eisa_root_init(void); +#else +static inline int sni_eisa_root_init(void) +{ + return 0; +} +#endif + +/* common irq stuff */ +extern void (*sni_hwint)(void); +extern struct irqaction sni_isa_irq; + +#endif /* __ASM_SNI_H */ diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h new file mode 100644 index 000000000000..facc2d7a87ca --- /dev/null +++ b/arch/mips/include/asm/socket.h @@ -0,0 +1,117 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1997, 1999, 2000, 2001 Ralf Baechle + * Copyright (C) 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include + +/* + * For setsockopt(2) + * + * This defines are ABI conformant as far as Linux supports these ... + */ +#define SOL_SOCKET 0xffff + +#define SO_DEBUG 0x0001 /* Record debugging information. */ +#define SO_REUSEADDR 0x0004 /* Allow reuse of local addresses. */ +#define SO_KEEPALIVE 0x0008 /* Keep connections alive and send + SIGPIPE when they die. */ +#define SO_DONTROUTE 0x0010 /* Don't do local routing. */ +#define SO_BROADCAST 0x0020 /* Allow transmission of + broadcast messages. */ +#define SO_LINGER 0x0080 /* Block on close of a reliable + socket to transmit pending data. */ +#define SO_OOBINLINE 0x0100 /* Receive out-of-band data in-band. */ +#if 0 +To add: #define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */ +#endif + +#define SO_TYPE 0x1008 /* Compatible name for SO_STYLE. */ +#define SO_STYLE SO_TYPE /* Synonym */ +#define SO_ERROR 0x1007 /* get error status and clear */ +#define SO_SNDBUF 0x1001 /* Send buffer size. */ +#define SO_RCVBUF 0x1002 /* Receive buffer. */ +#define SO_SNDLOWAT 0x1003 /* send low-water mark */ +#define SO_RCVLOWAT 0x1004 /* receive low-water mark */ +#define SO_SNDTIMEO 0x1005 /* send timeout */ +#define SO_RCVTIMEO 0x1006 /* receive timeout */ +#define SO_ACCEPTCONN 0x1009 + +/* linux-specific, might as well be the same as on i386 */ +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_BSDCOMPAT 14 + +#define SO_PASSCRED 17 +#define SO_PEERCRED 18 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_PEERSEC 30 +#define SO_SNDBUFFORCE 31 +#define SO_RCVBUFFORCE 33 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#ifdef __KERNEL__ + +/** sock_type - Socket types + * + * Please notice that for binary compat reasons MIPS has to + * override the enum sock_type in include/linux/net.h, so + * we define ARCH_HAS_SOCKET_TYPES here. + * + * @SOCK_DGRAM - datagram (conn.less) socket + * @SOCK_STREAM - stream (connection) socket + * @SOCK_RAW - raw socket + * @SOCK_RDM - reliably-delivered message + * @SOCK_SEQPACKET - sequential packet socket + * @SOCK_PACKET - linux specific way of getting packets at the dev level. + * For writing rarp and other similar things on the user level. + */ +enum sock_type { + SOCK_DGRAM = 1, + SOCK_STREAM = 2, + SOCK_RAW = 3, + SOCK_RDM = 4, + SOCK_SEQPACKET = 5, + SOCK_DCCP = 6, + SOCK_PACKET = 10, +}; + +#define SOCK_MAX (SOCK_PACKET + 1) +/* Mask which covers at least up to SOCK_MASK-1. The + * * remaining bits are used as flags. */ +#define SOCK_TYPE_MASK 0xf + +/* Flags for socket, socketpair, paccept */ +#define SOCK_CLOEXEC O_CLOEXEC +#define SOCK_NONBLOCK O_NONBLOCK + +#define ARCH_HAS_SOCKET_TYPES 1 + +#endif /* __KERNEL__ */ + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/mips/include/asm/sockios.h b/arch/mips/include/asm/sockios.h new file mode 100644 index 000000000000..ed1a5f78d22f --- /dev/null +++ b/arch/mips/include/asm/sockios.h @@ -0,0 +1,26 @@ +/* + * Socket-level I/O control calls. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 by Ralf Baechle + */ +#ifndef _ASM_SOCKIOS_H +#define _ASM_SOCKIOS_H + +#include + +/* Socket-level I/O control calls. */ +#define FIOGETOWN _IOR('f', 123, int) +#define FIOSETOWN _IOW('f', 124, int) + +#define SIOCATMARK _IOR('s', 7, int) +#define SIOCSPGRP _IOW('s', 8, pid_t) +#define SIOCGPGRP _IOR('s', 9, pid_t) + +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_SOCKIOS_H */ diff --git a/arch/mips/include/asm/sparsemem.h b/arch/mips/include/asm/sparsemem.h new file mode 100644 index 000000000000..795ac6c23203 --- /dev/null +++ b/arch/mips/include/asm/sparsemem.h @@ -0,0 +1,14 @@ +#ifndef _MIPS_SPARSEMEM_H +#define _MIPS_SPARSEMEM_H +#ifdef CONFIG_SPARSEMEM + +/* + * SECTION_SIZE_BITS 2^N: how big each section will be + * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space + */ +#define SECTION_SIZE_BITS 28 +#define MAX_PHYSMEM_BITS 35 + +#endif /* CONFIG_SPARSEMEM */ +#endif /* _MIPS_SPARSEMEM_H */ + diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h new file mode 100644 index 000000000000..bb897016c491 --- /dev/null +++ b/arch/mips/include/asm/spinlock.h @@ -0,0 +1,376 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999, 2000, 06 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_SPINLOCK_H +#define _ASM_SPINLOCK_H + +#include +#include + +/* + * Your basic SMP spinlocks, allowing only a single CPU anywhere + */ + +#define __raw_spin_is_locked(x) ((x)->lock != 0) +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) +#define __raw_spin_unlock_wait(x) \ + do { cpu_relax(); } while ((x)->lock) + +/* + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + */ + +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + unsigned int tmp; + + if (R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set noreorder # __raw_spin_lock \n" + "1: ll %1, %2 \n" + " bnez %1, 1b \n" + " li %1, 1 \n" + " sc %1, %0 \n" + " beqzl %1, 1b \n" + " nop \n" + " .set reorder \n" + : "=m" (lock->lock), "=&r" (tmp) + : "m" (lock->lock) + : "memory"); + } else { + __asm__ __volatile__( + " .set noreorder # __raw_spin_lock \n" + "1: ll %1, %2 \n" + " bnez %1, 2f \n" + " li %1, 1 \n" + " sc %1, %0 \n" + " beqz %1, 2f \n" + " nop \n" + " .subsection 2 \n" + "2: ll %1, %2 \n" + " bnez %1, 2b \n" + " li %1, 1 \n" + " b 1b \n" + " nop \n" + " .previous \n" + " .set reorder \n" + : "=m" (lock->lock), "=&r" (tmp) + : "m" (lock->lock) + : "memory"); + } + + smp_llsc_mb(); +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + smp_mb(); + + __asm__ __volatile__( + " .set noreorder # __raw_spin_unlock \n" + " sw $0, %0 \n" + " .set\treorder \n" + : "=m" (lock->lock) + : "m" (lock->lock) + : "memory"); +} + +static inline unsigned int __raw_spin_trylock(raw_spinlock_t *lock) +{ + unsigned int temp, res; + + if (R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set noreorder # __raw_spin_trylock \n" + "1: ll %0, %3 \n" + " ori %2, %0, 1 \n" + " sc %2, %1 \n" + " beqzl %2, 1b \n" + " nop \n" + " andi %2, %0, 1 \n" + " .set reorder" + : "=&r" (temp), "=m" (lock->lock), "=&r" (res) + : "m" (lock->lock) + : "memory"); + } else { + __asm__ __volatile__( + " .set noreorder # __raw_spin_trylock \n" + "1: ll %0, %3 \n" + " ori %2, %0, 1 \n" + " sc %2, %1 \n" + " beqz %2, 2f \n" + " andi %2, %0, 1 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" + " .set reorder" + : "=&r" (temp), "=m" (lock->lock), "=&r" (res) + : "m" (lock->lock) + : "memory"); + } + + smp_llsc_mb(); + + return res == 0; +} + +/* + * Read-write spinlocks, allowing multiple readers but only one writer. + * + * NOTE! it is quite common to have readers in interrupts but no interrupt + * writers. For those circumstances we can "mix" irq-safe locks - any writer + * needs to get a irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +/* + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_read_can_lock(rw) ((rw)->lock >= 0) + +/* + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_write_can_lock(rw) (!(rw)->lock) + +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + unsigned int tmp; + + if (R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set noreorder # __raw_read_lock \n" + "1: ll %1, %2 \n" + " bltz %1, 1b \n" + " addu %1, 1 \n" + " sc %1, %0 \n" + " beqzl %1, 1b \n" + " nop \n" + " .set reorder \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } else { + __asm__ __volatile__( + " .set noreorder # __raw_read_lock \n" + "1: ll %1, %2 \n" + " bltz %1, 2f \n" + " addu %1, 1 \n" + " sc %1, %0 \n" + " beqz %1, 1b \n" + " nop \n" + " .subsection 2 \n" + "2: ll %1, %2 \n" + " bltz %1, 2b \n" + " addu %1, 1 \n" + " b 1b \n" + " nop \n" + " .previous \n" + " .set reorder \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } + + smp_llsc_mb(); +} + +/* Note the use of sub, not subu which will make the kernel die with an + overflow exception if we ever try to unlock an rwlock that is already + unlocked or is being held by a writer. */ +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + unsigned int tmp; + + smp_llsc_mb(); + + if (R10000_LLSC_WAR) { + __asm__ __volatile__( + "1: ll %1, %2 # __raw_read_unlock \n" + " sub %1, 1 \n" + " sc %1, %0 \n" + " beqzl %1, 1b \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } else { + __asm__ __volatile__( + " .set noreorder # __raw_read_unlock \n" + "1: ll %1, %2 \n" + " sub %1, 1 \n" + " sc %1, %0 \n" + " beqz %1, 2f \n" + " nop \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" + " .set reorder \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } +} + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + unsigned int tmp; + + if (R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set noreorder # __raw_write_lock \n" + "1: ll %1, %2 \n" + " bnez %1, 1b \n" + " lui %1, 0x8000 \n" + " sc %1, %0 \n" + " beqzl %1, 1b \n" + " nop \n" + " .set reorder \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } else { + __asm__ __volatile__( + " .set noreorder # __raw_write_lock \n" + "1: ll %1, %2 \n" + " bnez %1, 2f \n" + " lui %1, 0x8000 \n" + " sc %1, %0 \n" + " beqz %1, 2f \n" + " nop \n" + " .subsection 2 \n" + "2: ll %1, %2 \n" + " bnez %1, 2b \n" + " lui %1, 0x8000 \n" + " b 1b \n" + " nop \n" + " .previous \n" + " .set reorder \n" + : "=m" (rw->lock), "=&r" (tmp) + : "m" (rw->lock) + : "memory"); + } + + smp_llsc_mb(); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + smp_mb(); + + __asm__ __volatile__( + " # __raw_write_unlock \n" + " sw $0, %0 \n" + : "=m" (rw->lock) + : "m" (rw->lock) + : "memory"); +} + +static inline int __raw_read_trylock(raw_rwlock_t *rw) +{ + unsigned int tmp; + int ret; + + if (R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set noreorder # __raw_read_trylock \n" + " li %2, 0 \n" + "1: ll %1, %3 \n" + " bltz %1, 2f \n" + " addu %1, 1 \n" + " sc %1, %0 \n" + " .set reorder \n" + " beqzl %1, 1b \n" + " nop \n" + __WEAK_LLSC_MB + " li %2, 1 \n" + "2: \n" + : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) + : "m" (rw->lock) + : "memory"); + } else { + __asm__ __volatile__( + " .set noreorder # __raw_read_trylock \n" + " li %2, 0 \n" + "1: ll %1, %3 \n" + " bltz %1, 2f \n" + " addu %1, 1 \n" + " sc %1, %0 \n" + " beqz %1, 1b \n" + " nop \n" + " .set reorder \n" + __WEAK_LLSC_MB + " li %2, 1 \n" + "2: \n" + : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) + : "m" (rw->lock) + : "memory"); + } + + return ret; +} + +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + unsigned int tmp; + int ret; + + if (R10000_LLSC_WAR) { + __asm__ __volatile__( + " .set noreorder # __raw_write_trylock \n" + " li %2, 0 \n" + "1: ll %1, %3 \n" + " bnez %1, 2f \n" + " lui %1, 0x8000 \n" + " sc %1, %0 \n" + " beqzl %1, 1b \n" + " nop \n" + __WEAK_LLSC_MB + " li %2, 1 \n" + " .set reorder \n" + "2: \n" + : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) + : "m" (rw->lock) + : "memory"); + } else { + __asm__ __volatile__( + " .set noreorder # __raw_write_trylock \n" + " li %2, 0 \n" + "1: ll %1, %3 \n" + " bnez %1, 2f \n" + " lui %1, 0x8000 \n" + " sc %1, %0 \n" + " beqz %1, 3f \n" + " li %2, 1 \n" + "2: \n" + __WEAK_LLSC_MB + " .subsection 2 \n" + "3: b 1b \n" + " li %2, 0 \n" + " .previous \n" + " .set reorder \n" + : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) + : "m" (rw->lock) + : "memory"); + } + + return ret; +} + + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* _ASM_SPINLOCK_H */ diff --git a/arch/mips/include/asm/spinlock_types.h b/arch/mips/include/asm/spinlock_types.h new file mode 100644 index 000000000000..ce26c5048b15 --- /dev/null +++ b/arch/mips/include/asm/spinlock_types.h @@ -0,0 +1,20 @@ +#ifndef _ASM_SPINLOCK_TYPES_H +#define _ASM_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile unsigned int lock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + volatile unsigned int lock; +} raw_rwlock_t; + +#define __RAW_RW_LOCK_UNLOCKED { 0 } + +#endif diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h new file mode 100644 index 000000000000..4c37c4e5f72e --- /dev/null +++ b/arch/mips/include/asm/stackframe.h @@ -0,0 +1,574 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 99, 2001 Ralf Baechle + * Copyright (C) 1994, 1995, 1996 Paul M. Antoine. + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki + */ +#ifndef _ASM_STACKFRAME_H +#define _ASM_STACKFRAME_H + +#include + +#include +#include +#include +#include + +/* + * For SMTC kernel, global IE should be left set, and interrupts + * controlled exclusively via IXMT. + */ +#ifdef CONFIG_MIPS_MT_SMTC +#define STATMASK 0x1e +#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) +#define STATMASK 0x3f +#else +#define STATMASK 0x1f +#endif + +#ifdef CONFIG_MIPS_MT_SMTC +#include +#endif /* CONFIG_MIPS_MT_SMTC */ + + .macro SAVE_AT + .set push + .set noat + LONG_S $1, PT_R1(sp) + .set pop + .endm + + .macro SAVE_TEMP +#ifdef CONFIG_CPU_HAS_SMARTMIPS + mflhxu v1 + LONG_S v1, PT_LO(sp) + mflhxu v1 + LONG_S v1, PT_HI(sp) + mflhxu v1 + LONG_S v1, PT_ACX(sp) +#else + mfhi v1 + LONG_S v1, PT_HI(sp) + mflo v1 + LONG_S v1, PT_LO(sp) +#endif +#ifdef CONFIG_32BIT + LONG_S $8, PT_R8(sp) + LONG_S $9, PT_R9(sp) +#endif + LONG_S $10, PT_R10(sp) + LONG_S $11, PT_R11(sp) + LONG_S $12, PT_R12(sp) + LONG_S $13, PT_R13(sp) + LONG_S $14, PT_R14(sp) + LONG_S $15, PT_R15(sp) + LONG_S $24, PT_R24(sp) + .endm + + .macro SAVE_STATIC + LONG_S $16, PT_R16(sp) + LONG_S $17, PT_R17(sp) + LONG_S $18, PT_R18(sp) + LONG_S $19, PT_R19(sp) + LONG_S $20, PT_R20(sp) + LONG_S $21, PT_R21(sp) + LONG_S $22, PT_R22(sp) + LONG_S $23, PT_R23(sp) + LONG_S $30, PT_R30(sp) + .endm + +#ifdef CONFIG_SMP +#ifdef CONFIG_MIPS_MT_SMTC +#define PTEBASE_SHIFT 19 /* TCBIND */ +#else +#define PTEBASE_SHIFT 23 /* CONTEXT */ +#endif + .macro get_saved_sp /* SMP variation */ +#ifdef CONFIG_MIPS_MT_SMTC + mfc0 k0, CP0_TCBIND +#else + MFC0 k0, CP0_CONTEXT +#endif +#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) + lui k1, %hi(kernelsp) +#else + lui k1, %highest(kernelsp) + daddiu k1, %higher(kernelsp) + dsll k1, 16 + daddiu k1, %hi(kernelsp) + dsll k1, 16 +#endif + LONG_SRL k0, PTEBASE_SHIFT + LONG_ADDU k1, k0 + LONG_L k1, %lo(kernelsp)(k1) + .endm + + .macro set_saved_sp stackp temp temp2 +#ifdef CONFIG_MIPS_MT_SMTC + mfc0 \temp, CP0_TCBIND +#else + MFC0 \temp, CP0_CONTEXT +#endif + LONG_SRL \temp, PTEBASE_SHIFT + LONG_S \stackp, kernelsp(\temp) + .endm +#else + .macro get_saved_sp /* Uniprocessor variation */ +#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) + lui k1, %hi(kernelsp) +#else + lui k1, %highest(kernelsp) + daddiu k1, %higher(kernelsp) + dsll k1, k1, 16 + daddiu k1, %hi(kernelsp) + dsll k1, k1, 16 +#endif + LONG_L k1, %lo(kernelsp)(k1) + .endm + + .macro set_saved_sp stackp temp temp2 + LONG_S \stackp, kernelsp + .endm +#endif + + .macro SAVE_SOME + .set push + .set noat + .set reorder + mfc0 k0, CP0_STATUS + sll k0, 3 /* extract cu0 bit */ + .set noreorder + bltz k0, 8f + move k1, sp + .set reorder + /* Called from user mode, new stack. */ + get_saved_sp +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS +8: move k0, sp + PTR_SUBU sp, k1, PT_SIZE +#else + .set at=k0 +8: PTR_SUBU k1, PT_SIZE + .set noat + move k0, sp + move sp, k1 +#endif + LONG_S k0, PT_R29(sp) + LONG_S $3, PT_R3(sp) + /* + * You might think that you don't need to save $0, + * but the FPU emulator and gdb remote debug stub + * need it to operate correctly + */ + LONG_S $0, PT_R0(sp) + mfc0 v1, CP0_STATUS + LONG_S $2, PT_R2(sp) + LONG_S v1, PT_STATUS(sp) +#ifdef CONFIG_MIPS_MT_SMTC + /* + * Ideally, these instructions would be shuffled in + * to cover the pipeline delay. + */ + .set mips32 + mfc0 v1, CP0_TCSTATUS + .set mips0 + LONG_S v1, PT_TCSTATUS(sp) +#endif /* CONFIG_MIPS_MT_SMTC */ + LONG_S $4, PT_R4(sp) + mfc0 v1, CP0_CAUSE + LONG_S $5, PT_R5(sp) + LONG_S v1, PT_CAUSE(sp) + LONG_S $6, PT_R6(sp) + MFC0 v1, CP0_EPC + LONG_S $7, PT_R7(sp) +#ifdef CONFIG_64BIT + LONG_S $8, PT_R8(sp) + LONG_S $9, PT_R9(sp) +#endif + LONG_S v1, PT_EPC(sp) + LONG_S $25, PT_R25(sp) + LONG_S $28, PT_R28(sp) + LONG_S $31, PT_R31(sp) + ori $28, sp, _THREAD_MASK + xori $28, _THREAD_MASK + .set pop + .endm + + .macro SAVE_ALL + SAVE_SOME + SAVE_AT + SAVE_TEMP + SAVE_STATIC + .endm + + .macro RESTORE_AT + .set push + .set noat + LONG_L $1, PT_R1(sp) + .set pop + .endm + + .macro RESTORE_TEMP +#ifdef CONFIG_CPU_HAS_SMARTMIPS + LONG_L $24, PT_ACX(sp) + mtlhx $24 + LONG_L $24, PT_HI(sp) + mtlhx $24 + LONG_L $24, PT_LO(sp) + mtlhx $24 +#else + LONG_L $24, PT_LO(sp) + mtlo $24 + LONG_L $24, PT_HI(sp) + mthi $24 +#endif +#ifdef CONFIG_32BIT + LONG_L $8, PT_R8(sp) + LONG_L $9, PT_R9(sp) +#endif + LONG_L $10, PT_R10(sp) + LONG_L $11, PT_R11(sp) + LONG_L $12, PT_R12(sp) + LONG_L $13, PT_R13(sp) + LONG_L $14, PT_R14(sp) + LONG_L $15, PT_R15(sp) + LONG_L $24, PT_R24(sp) + .endm + + .macro RESTORE_STATIC + LONG_L $16, PT_R16(sp) + LONG_L $17, PT_R17(sp) + LONG_L $18, PT_R18(sp) + LONG_L $19, PT_R19(sp) + LONG_L $20, PT_R20(sp) + LONG_L $21, PT_R21(sp) + LONG_L $22, PT_R22(sp) + LONG_L $23, PT_R23(sp) + LONG_L $30, PT_R30(sp) + .endm + +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + + .macro RESTORE_SOME + .set push + .set reorder + .set noat + mfc0 a0, CP0_STATUS + li v1, 0xff00 + ori a0, STATMASK + xori a0, STATMASK + mtc0 a0, CP0_STATUS + and a0, v1 + LONG_L v0, PT_STATUS(sp) + nor v1, $0, v1 + and v0, v1 + or v0, a0 + mtc0 v0, CP0_STATUS + LONG_L $31, PT_R31(sp) + LONG_L $28, PT_R28(sp) + LONG_L $25, PT_R25(sp) + LONG_L $7, PT_R7(sp) + LONG_L $6, PT_R6(sp) + LONG_L $5, PT_R5(sp) + LONG_L $4, PT_R4(sp) + LONG_L $3, PT_R3(sp) + LONG_L $2, PT_R2(sp) + .set pop + .endm + + .macro RESTORE_SP_AND_RET + .set push + .set noreorder + LONG_L k0, PT_EPC(sp) + LONG_L sp, PT_R29(sp) + jr k0 + rfe + .set pop + .endm + +#else + .macro RESTORE_SOME + .set push + .set reorder + .set noat +#ifdef CONFIG_MIPS_MT_SMTC + .set mips32r2 + /* + * We need to make sure the read-modify-write + * of Status below isn't perturbed by an interrupt + * or cross-TC access, so we need to do at least a DMT, + * protected by an interrupt-inhibit. But setting IXMT + * also creates a few-cycle window where an IPI could + * be queued and not be detected before potentially + * returning to a WAIT or user-mode loop. It must be + * replayed. + * + * We're in the middle of a context switch, and + * we can't dispatch it directly without trashing + * some registers, so we'll try to detect this unlikely + * case and program a software interrupt in the VPE, + * as would be done for a cross-VPE IPI. To accomodate + * the handling of that case, we're doing a DVPE instead + * of just a DMT here to protect against other threads. + * This is a lot of cruft to cover a tiny window. + * If you can find a better design, implement it! + * + */ + mfc0 v0, CP0_TCSTATUS + ori v0, TCSTATUS_IXMT + mtc0 v0, CP0_TCSTATUS + _ehb + DVPE 5 # dvpe a1 + jal mips_ihb +#endif /* CONFIG_MIPS_MT_SMTC */ + mfc0 a0, CP0_STATUS + ori a0, STATMASK + xori a0, STATMASK + mtc0 a0, CP0_STATUS + li v1, 0xff00 + and a0, v1 + LONG_L v0, PT_STATUS(sp) + nor v1, $0, v1 + and v0, v1 + or v0, a0 + mtc0 v0, CP0_STATUS +#ifdef CONFIG_MIPS_MT_SMTC +/* + * Only after EXL/ERL have been restored to status can we + * restore TCStatus.IXMT. + */ + LONG_L v1, PT_TCSTATUS(sp) + _ehb + mfc0 a0, CP0_TCSTATUS + andi v1, TCSTATUS_IXMT + bnez v1, 0f + +/* + * We'd like to detect any IPIs queued in the tiny window + * above and request an software interrupt to service them + * when we ERET. + * + * Computing the offset into the IPIQ array of the executing + * TC's IPI queue in-line would be tedious. We use part of + * the TCContext register to hold 16 bits of offset that we + * can add in-line to find the queue head. + */ + mfc0 v0, CP0_TCCONTEXT + la a2, IPIQ + srl v0, v0, 16 + addu a2, a2, v0 + LONG_L v0, 0(a2) + beqz v0, 0f +/* + * If we have a queue, provoke dispatch within the VPE by setting C_SW1 + */ + mfc0 v0, CP0_CAUSE + ori v0, v0, C_SW1 + mtc0 v0, CP0_CAUSE +0: + /* + * This test should really never branch but + * let's be prudent here. Having atomized + * the shared register modifications, we can + * now EVPE, and must do so before interrupts + * are potentially re-enabled. + */ + andi a1, a1, MVPCONTROL_EVP + beqz a1, 1f + evpe +1: + /* We know that TCStatua.IXMT should be set from above */ + xori a0, a0, TCSTATUS_IXMT + or a0, a0, v1 + mtc0 a0, CP0_TCSTATUS + _ehb + + .set mips0 +#endif /* CONFIG_MIPS_MT_SMTC */ + LONG_L v1, PT_EPC(sp) + MTC0 v1, CP0_EPC + LONG_L $31, PT_R31(sp) + LONG_L $28, PT_R28(sp) + LONG_L $25, PT_R25(sp) +#ifdef CONFIG_64BIT + LONG_L $8, PT_R8(sp) + LONG_L $9, PT_R9(sp) +#endif + LONG_L $7, PT_R7(sp) + LONG_L $6, PT_R6(sp) + LONG_L $5, PT_R5(sp) + LONG_L $4, PT_R4(sp) + LONG_L $3, PT_R3(sp) + LONG_L $2, PT_R2(sp) + .set pop + .endm + + .macro RESTORE_SP_AND_RET + LONG_L sp, PT_R29(sp) + .set mips3 + eret + .set mips0 + .endm + +#endif + + .macro RESTORE_SP + LONG_L sp, PT_R29(sp) + .endm + + .macro RESTORE_ALL + RESTORE_TEMP + RESTORE_STATIC + RESTORE_AT + RESTORE_SOME + RESTORE_SP + .endm + + .macro RESTORE_ALL_AND_RET + RESTORE_TEMP + RESTORE_STATIC + RESTORE_AT + RESTORE_SOME + RESTORE_SP_AND_RET + .endm + +/* + * Move to kernel mode and disable interrupts. + * Set cp0 enable bit as sign that we're running on the kernel stack + */ + .macro CLI +#if !defined(CONFIG_MIPS_MT_SMTC) + mfc0 t0, CP0_STATUS + li t1, ST0_CU0 | STATMASK + or t0, t1 + xori t0, STATMASK + mtc0 t0, CP0_STATUS +#else /* CONFIG_MIPS_MT_SMTC */ + /* + * For SMTC, we need to set privilege + * and disable interrupts only for the + * current TC, using the TCStatus register. + */ + mfc0 t0, CP0_TCSTATUS + /* Fortunately CU 0 is in the same place in both registers */ + /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */ + li t1, ST0_CU0 | 0x08001c00 + or t0, t1 + /* Clear TKSU, leave IXMT */ + xori t0, 0x00001800 + mtc0 t0, CP0_TCSTATUS + _ehb + /* We need to leave the global IE bit set, but clear EXL...*/ + mfc0 t0, CP0_STATUS + ori t0, ST0_EXL | ST0_ERL + xori t0, ST0_EXL | ST0_ERL + mtc0 t0, CP0_STATUS +#endif /* CONFIG_MIPS_MT_SMTC */ + irq_disable_hazard + .endm + +/* + * Move to kernel mode and enable interrupts. + * Set cp0 enable bit as sign that we're running on the kernel stack + */ + .macro STI +#if !defined(CONFIG_MIPS_MT_SMTC) + mfc0 t0, CP0_STATUS + li t1, ST0_CU0 | STATMASK + or t0, t1 + xori t0, STATMASK & ~1 + mtc0 t0, CP0_STATUS +#else /* CONFIG_MIPS_MT_SMTC */ + /* + * For SMTC, we need to set privilege + * and enable interrupts only for the + * current TC, using the TCStatus register. + */ + _ehb + mfc0 t0, CP0_TCSTATUS + /* Fortunately CU 0 is in the same place in both registers */ + /* Set TCU0, TKSU (for later inversion) and IXMT */ + li t1, ST0_CU0 | 0x08001c00 + or t0, t1 + /* Clear TKSU *and* IXMT */ + xori t0, 0x00001c00 + mtc0 t0, CP0_TCSTATUS + _ehb + /* We need to leave the global IE bit set, but clear EXL...*/ + mfc0 t0, CP0_STATUS + ori t0, ST0_EXL + xori t0, ST0_EXL + mtc0 t0, CP0_STATUS + /* irq_enable_hazard below should expand to EHB for 24K/34K cpus */ +#endif /* CONFIG_MIPS_MT_SMTC */ + irq_enable_hazard + .endm + +/* + * Just move to kernel mode and leave interrupts as they are. Note + * for the R3000 this means copying the previous enable from IEp. + * Set cp0 enable bit as sign that we're running on the kernel stack + */ + .macro KMODE +#ifdef CONFIG_MIPS_MT_SMTC + /* + * This gets baroque in SMTC. We want to + * protect the non-atomic clearing of EXL + * with DMT/EMT, but we don't want to take + * an interrupt while DMT is still in effect. + */ + + /* KMODE gets invoked from both reorder and noreorder code */ + .set push + .set mips32r2 + .set noreorder + mfc0 v0, CP0_TCSTATUS + andi v1, v0, TCSTATUS_IXMT + ori v0, TCSTATUS_IXMT + mtc0 v0, CP0_TCSTATUS + _ehb + DMT 2 # dmt v0 + /* + * We don't know a priori if ra is "live" + */ + move t0, ra + jal mips_ihb + nop /* delay slot */ + move ra, t0 +#endif /* CONFIG_MIPS_MT_SMTC */ + mfc0 t0, CP0_STATUS + li t1, ST0_CU0 | (STATMASK & ~1) +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + andi t2, t0, ST0_IEP + srl t2, 2 + or t0, t2 +#endif + or t0, t1 + xori t0, STATMASK & ~1 + mtc0 t0, CP0_STATUS +#ifdef CONFIG_MIPS_MT_SMTC + _ehb + andi v0, v0, VPECONTROL_TE + beqz v0, 2f + nop /* delay slot */ + emt +2: + mfc0 v0, CP0_TCSTATUS + /* Clear IXMT, then OR in previous value */ + ori v0, TCSTATUS_IXMT + xori v0, TCSTATUS_IXMT + or v0, v1, v0 + mtc0 v0, CP0_TCSTATUS + /* + * irq_disable_hazard below should expand to EHB + * on 24K/34K CPUS + */ + .set pop +#endif /* CONFIG_MIPS_MT_SMTC */ + irq_disable_hazard + .endm + +#endif /* _ASM_STACKFRAME_H */ diff --git a/arch/mips/include/asm/stacktrace.h b/arch/mips/include/asm/stacktrace.h new file mode 100644 index 000000000000..0bf82818aa53 --- /dev/null +++ b/arch/mips/include/asm/stacktrace.h @@ -0,0 +1,48 @@ +#ifndef _ASM_STACKTRACE_H +#define _ASM_STACKTRACE_H + +#include + +#ifdef CONFIG_KALLSYMS +extern int raw_show_trace; +extern unsigned long unwind_stack(struct task_struct *task, unsigned long *sp, + unsigned long pc, unsigned long *ra); +#else +#define raw_show_trace 1 +static inline unsigned long unwind_stack(struct task_struct *task, + unsigned long *sp, unsigned long pc, unsigned long *ra) +{ + return 0; +} +#endif + +static __always_inline void prepare_frametrace(struct pt_regs *regs) +{ +#ifndef CONFIG_KALLSYMS + /* + * Remove any garbage that may be in regs (specially func + * addresses) to avoid show_raw_backtrace() to report them + */ + memset(regs, 0, sizeof(*regs)); +#endif + __asm__ __volatile__( + ".set push\n\t" + ".set noat\n\t" +#ifdef CONFIG_64BIT + "1: dla $1, 1b\n\t" + "sd $1, %0\n\t" + "sd $29, %1\n\t" + "sd $31, %2\n\t" +#else + "1: la $1, 1b\n\t" + "sw $1, %0\n\t" + "sw $29, %1\n\t" + "sw $31, %2\n\t" +#endif + ".set pop\n\t" + : "=m" (regs->cp0_epc), + "=m" (regs->regs[29]), "=m" (regs->regs[31]) + : : "memory"); +} + +#endif /* _ASM_STACKTRACE_H */ diff --git a/arch/mips/include/asm/stat.h b/arch/mips/include/asm/stat.h new file mode 100644 index 000000000000..6e00f751ab6d --- /dev/null +++ b/arch/mips/include/asm/stat.h @@ -0,0 +1,132 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999, 2000 Ralf Baechle + * Copyright (C) 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_STAT_H +#define _ASM_STAT_H + +#include + +#include + +#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32) + +struct stat { + unsigned st_dev; + long st_pad1[3]; /* Reserved for network id */ + ino_t st_ino; + mode_t st_mode; + nlink_t st_nlink; + uid_t st_uid; + gid_t st_gid; + unsigned st_rdev; + long st_pad2[2]; + off_t st_size; + long st_pad3; + /* + * Actually this should be timestruc_t st_atime, st_mtime and st_ctime + * but we don't have it under Linux. + */ + time_t st_atime; + long st_atime_nsec; + time_t st_mtime; + long st_mtime_nsec; + time_t st_ctime; + long st_ctime_nsec; + long st_blksize; + long st_blocks; + long st_pad4[14]; +}; + +/* + * This matches struct stat64 in glibc2.1, hence the absolutely insane + * amounts of padding around dev_t's. The memory layout is the same as of + * struct stat of the 64-bit kernel. + */ + +struct stat64 { + unsigned long st_dev; + unsigned long st_pad0[3]; /* Reserved for st_dev expansion */ + + unsigned long long st_ino; + + mode_t st_mode; + nlink_t st_nlink; + + uid_t st_uid; + gid_t st_gid; + + unsigned long st_rdev; + unsigned long st_pad1[3]; /* Reserved for st_rdev expansion */ + + long long st_size; + + /* + * Actually this should be timestruc_t st_atime, st_mtime and st_ctime + * but we don't have it under Linux. + */ + time_t st_atime; + unsigned long st_atime_nsec; /* Reserved for st_atime expansion */ + + time_t st_mtime; + unsigned long st_mtime_nsec; /* Reserved for st_mtime expansion */ + + time_t st_ctime; + unsigned long st_ctime_nsec; /* Reserved for st_ctime expansion */ + + unsigned long st_blksize; + unsigned long st_pad2; + + long long st_blocks; +}; + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#if _MIPS_SIM == _MIPS_SIM_ABI64 + +/* The memory layout is the same as of struct stat64 of the 32-bit kernel. */ +struct stat { + unsigned int st_dev; + unsigned int st_pad0[3]; /* Reserved for st_dev expansion */ + + unsigned long st_ino; + + mode_t st_mode; + nlink_t st_nlink; + + uid_t st_uid; + gid_t st_gid; + + unsigned int st_rdev; + unsigned int st_pad1[3]; /* Reserved for st_rdev expansion */ + + off_t st_size; + + /* + * Actually this should be timestruc_t st_atime, st_mtime and st_ctime + * but we don't have it under Linux. + */ + unsigned int st_atime; + unsigned int st_atime_nsec; + + unsigned int st_mtime; + unsigned int st_mtime_nsec; + + unsigned int st_ctime; + unsigned int st_ctime_nsec; + + unsigned int st_blksize; + unsigned int st_pad2; + + unsigned long st_blocks; +}; + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ + +#define STAT_HAVE_NSEC 1 + +#endif /* _ASM_STAT_H */ diff --git a/arch/mips/include/asm/statfs.h b/arch/mips/include/asm/statfs.h new file mode 100644 index 000000000000..c3ddf973c1c0 --- /dev/null +++ b/arch/mips/include/asm/statfs.h @@ -0,0 +1,96 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1999 by Ralf Baechle + */ +#ifndef _ASM_STATFS_H +#define _ASM_STATFS_H + +#include +#include + +#ifndef __KERNEL_STRICT_NAMES + +#include + +typedef __kernel_fsid_t fsid_t; + +#endif + +struct statfs { + long f_type; +#define f_fstyp f_type + long f_bsize; + long f_frsize; /* Fragment size - unsupported */ + long f_blocks; + long f_bfree; + long f_files; + long f_ffree; + long f_bavail; + + /* Linux specials */ + __kernel_fsid_t f_fsid; + long f_namelen; + long f_spare[6]; +}; + +#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32) + +/* + * Unlike the traditional version the LFAPI version has none of the ABI junk + */ +struct statfs64 { + __u32 f_type; + __u32 f_bsize; + __u32 f_frsize; /* Fragment size - unsupported */ + __u32 __pad; + __u64 f_blocks; + __u64 f_bfree; + __u64 f_files; + __u64 f_ffree; + __u64 f_bavail; + __kernel_fsid_t f_fsid; + __u32 f_namelen; + __u32 f_spare[6]; +}; + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#if _MIPS_SIM == _MIPS_SIM_ABI64 + +struct statfs64 { /* Same as struct statfs */ + long f_type; + long f_bsize; + long f_frsize; /* Fragment size - unsupported */ + long f_blocks; + long f_bfree; + long f_files; + long f_ffree; + long f_bavail; + + /* Linux specials */ + __kernel_fsid_t f_fsid; + long f_namelen; + long f_spare[6]; +}; + +struct compat_statfs64 { + __u32 f_type; + __u32 f_bsize; + __u32 f_frsize; /* Fragment size - unsupported */ + __u32 __pad; + __u64 f_blocks; + __u64 f_bfree; + __u64 f_files; + __u64 f_ffree; + __u64 f_bavail; + __kernel_fsid_t f_fsid; + __u32 f_namelen; + __u32 f_spare[6]; +}; + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ + +#endif /* _ASM_STATFS_H */ diff --git a/arch/mips/include/asm/string.h b/arch/mips/include/asm/string.h new file mode 100644 index 000000000000..436e3ad352d9 --- /dev/null +++ b/arch/mips/include/asm/string.h @@ -0,0 +1,143 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1994, 95, 96, 97, 98, 2000, 01 Ralf Baechle + * Copyright (c) 2000 by Silicon Graphics, Inc. + * Copyright (c) 2001 MIPS Technologies, Inc. + */ +#ifndef _ASM_STRING_H +#define _ASM_STRING_H + + +/* + * Most of the inline functions are rather naive implementations so I just + * didn't bother updating them for 64-bit ... + */ +#ifdef CONFIG_32BIT + +#ifndef IN_STRING_C + +#define __HAVE_ARCH_STRCPY +static __inline__ char *strcpy(char *__dest, __const__ char *__src) +{ + char *__xdest = __dest; + + __asm__ __volatile__( + ".set\tnoreorder\n\t" + ".set\tnoat\n" + "1:\tlbu\t$1,(%1)\n\t" + "addiu\t%1,1\n\t" + "sb\t$1,(%0)\n\t" + "bnez\t$1,1b\n\t" + "addiu\t%0,1\n\t" + ".set\tat\n\t" + ".set\treorder" + : "=r" (__dest), "=r" (__src) + : "0" (__dest), "1" (__src) + : "memory"); + + return __xdest; +} + +#define __HAVE_ARCH_STRNCPY +static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n) +{ + char *__xdest = __dest; + + if (__n == 0) + return __xdest; + + __asm__ __volatile__( + ".set\tnoreorder\n\t" + ".set\tnoat\n" + "1:\tlbu\t$1,(%1)\n\t" + "subu\t%2,1\n\t" + "sb\t$1,(%0)\n\t" + "beqz\t$1,2f\n\t" + "addiu\t%0,1\n\t" + "bnez\t%2,1b\n\t" + "addiu\t%1,1\n" + "2:\n\t" + ".set\tat\n\t" + ".set\treorder" + : "=r" (__dest), "=r" (__src), "=r" (__n) + : "0" (__dest), "1" (__src), "2" (__n) + : "memory"); + + return __xdest; +} + +#define __HAVE_ARCH_STRCMP +static __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct) +{ + int __res; + + __asm__ __volatile__( + ".set\tnoreorder\n\t" + ".set\tnoat\n\t" + "lbu\t%2,(%0)\n" + "1:\tlbu\t$1,(%1)\n\t" + "addiu\t%0,1\n\t" + "bne\t$1,%2,2f\n\t" + "addiu\t%1,1\n\t" + "bnez\t%2,1b\n\t" + "lbu\t%2,(%0)\n\t" +#if defined(CONFIG_CPU_R3000) + "nop\n\t" +#endif + "move\t%2,$1\n" + "2:\tsubu\t%2,$1\n" + "3:\t.set\tat\n\t" + ".set\treorder" + : "=r" (__cs), "=r" (__ct), "=r" (__res) + : "0" (__cs), "1" (__ct)); + + return __res; +} + +#endif /* !defined(IN_STRING_C) */ + +#define __HAVE_ARCH_STRNCMP +static __inline__ int +strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count) +{ + int __res; + + __asm__ __volatile__( + ".set\tnoreorder\n\t" + ".set\tnoat\n" + "1:\tlbu\t%3,(%0)\n\t" + "beqz\t%2,2f\n\t" + "lbu\t$1,(%1)\n\t" + "subu\t%2,1\n\t" + "bne\t$1,%3,3f\n\t" + "addiu\t%0,1\n\t" + "bnez\t%3,1b\n\t" + "addiu\t%1,1\n" + "2:\n\t" +#if defined(CONFIG_CPU_R3000) + "nop\n\t" +#endif + "move\t%3,$1\n" + "3:\tsubu\t%3,$1\n\t" + ".set\tat\n\t" + ".set\treorder" + : "=r" (__cs), "=r" (__ct), "=r" (__count), "=r" (__res) + : "0" (__cs), "1" (__ct), "2" (__count)); + + return __res; +} +#endif /* CONFIG_32BIT */ + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *__s, int __c, size_t __count); + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *__to, __const__ void *__from, size_t __n); + +#define __HAVE_ARCH_MEMMOVE +extern void *memmove(void *__dest, __const__ void *__src, size_t __n); + +#endif /* _ASM_STRING_H */ diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h new file mode 100644 index 000000000000..2562f8f9be0e --- /dev/null +++ b/arch/mips/include/asm/suspend.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SUSPEND_H +#define __ASM_SUSPEND_H + +/* Somewhen... Maybe :-) */ + +#endif /* __ASM_SUSPEND_H */ diff --git a/arch/mips/include/asm/sysmips.h b/arch/mips/include/asm/sysmips.h new file mode 100644 index 000000000000..4f47b7d6a5f7 --- /dev/null +++ b/arch/mips/include/asm/sysmips.h @@ -0,0 +1,25 @@ +/* + * Definitions for the MIPS sysmips(2) call + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 by Ralf Baechle + */ +#ifndef _ASM_SYSMIPS_H +#define _ASM_SYSMIPS_H + +/* + * Commands for the sysmips(2) call + * + * sysmips(2) is deprecated - though some existing software uses it. + * We only support the following commands. + */ +#define SETNAME 1 /* set hostname */ +#define FLUSH_CACHE 3 /* writeback and invalidate caches */ +#define MIPS_FIXADE 7 /* control address error fixing */ +#define MIPS_RDNVRAM 10 /* read NVRAM */ +#define MIPS_ATOMIC_SET 2001 /* atomically set variable */ + +#endif /* _ASM_SYSMIPS_H */ diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h new file mode 100644 index 000000000000..a944eda4faf5 --- /dev/null +++ b/arch/mips/include/asm/system.h @@ -0,0 +1,220 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003, 06 by Ralf Baechle + * Copyright (C) 1996 by Paul M. Antoine + * Copyright (C) 1999 Silicon Graphics + * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. + */ +#ifndef _ASM_SYSTEM_H +#define _ASM_SYSTEM_H + +#include +#include + +#include +#include +#include +#include +#include +#include + + +/* + * switch_to(n) should switch tasks to task nr n, first + * checking that n isn't the current task, in which case it does nothing. + */ +extern asmlinkage void *resume(void *last, void *next, void *next_ti); + +struct task_struct; + +#ifdef CONFIG_MIPS_MT_FPAFF + +/* + * Handle the scheduler resume end of FPU affinity management. We do this + * inline to try to keep the overhead down. If we have been forced to run on + * a "CPU" with an FPU because of a previous high level of FP computation, + * but did not actually use the FPU during the most recent time-slice (CU1 + * isn't set), we undo the restriction on cpus_allowed. + * + * We're not calling set_cpus_allowed() here, because we have no need to + * force prompt migration - we're already switching the current CPU to a + * different thread. + */ + +#define __mips_mt_fpaff_switch_to(prev) \ +do { \ + struct thread_info *__prev_ti = task_thread_info(prev); \ + \ + if (cpu_has_fpu && \ + test_ti_thread_flag(__prev_ti, TIF_FPUBOUND) && \ + (!(KSTK_STATUS(prev) & ST0_CU1))) { \ + clear_ti_thread_flag(__prev_ti, TIF_FPUBOUND); \ + prev->cpus_allowed = prev->thread.user_cpus_allowed; \ + } \ + next->thread.emulated_fp = 0; \ +} while(0) + +#else +#define __mips_mt_fpaff_switch_to(prev) do { (void) (prev); } while (0) +#endif + +#define switch_to(prev, next, last) \ +do { \ + __mips_mt_fpaff_switch_to(prev); \ + if (cpu_has_dsp) \ + __save_dsp(prev); \ + (last) = resume(prev, next, task_thread_info(next)); \ +} while (0) + +#define finish_arch_switch(prev) \ +do { \ + if (cpu_has_dsp) \ + __restore_dsp(current); \ + if (cpu_has_userlocal) \ + write_c0_userlocal(current_thread_info()->tp_value); \ +} while (0) + +static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) +{ + __u32 retval; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long dummy; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %0, %3 # xchg_u32 \n" + " .set mips0 \n" + " move %2, %z4 \n" + " .set mips3 \n" + " sc %2, %1 \n" + " beqzl %2, 1b \n" + " .set mips0 \n" + : "=&r" (retval), "=m" (*m), "=&r" (dummy) + : "R" (*m), "Jr" (val) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long dummy; + + __asm__ __volatile__( + " .set mips3 \n" + "1: ll %0, %3 # xchg_u32 \n" + " .set mips0 \n" + " move %2, %z4 \n" + " .set mips3 \n" + " sc %2, %1 \n" + " beqz %2, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (retval), "=m" (*m), "=&r" (dummy) + : "R" (*m), "Jr" (val) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + retval = *m; + *m = val; + raw_local_irq_restore(flags); /* implies memory barrier */ + } + + smp_llsc_mb(); + + return retval; +} + +#ifdef CONFIG_64BIT +static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) +{ + __u64 retval; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + unsigned long dummy; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %0, %3 # xchg_u64 \n" + " move %2, %z4 \n" + " scd %2, %1 \n" + " beqzl %2, 1b \n" + " .set mips0 \n" + : "=&r" (retval), "=m" (*m), "=&r" (dummy) + : "R" (*m), "Jr" (val) + : "memory"); + } else if (cpu_has_llsc) { + unsigned long dummy; + + __asm__ __volatile__( + " .set mips3 \n" + "1: lld %0, %3 # xchg_u64 \n" + " move %2, %z4 \n" + " scd %2, %1 \n" + " beqz %2, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" + " .set mips0 \n" + : "=&r" (retval), "=m" (*m), "=&r" (dummy) + : "R" (*m), "Jr" (val) + : "memory"); + } else { + unsigned long flags; + + raw_local_irq_save(flags); + retval = *m; + *m = val; + raw_local_irq_restore(flags); /* implies memory barrier */ + } + + smp_llsc_mb(); + + return retval; +} +#else +extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 val); +#define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels +#endif + +/* This function doesn't exist, so you'll get a linker error + if something tries to do an invalid xchg(). */ +extern void __xchg_called_with_bad_pointer(void); + +static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) +{ + switch (size) { + case 4: + return __xchg_u32(ptr, x); + case 8: + return __xchg_u64(ptr, x); + } + __xchg_called_with_bad_pointer(); + return x; +} + +#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) + +extern void set_handler(unsigned long offset, void *addr, unsigned long len); +extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len); + +typedef void (*vi_handler_t)(void); +extern void *set_vi_handler(int n, vi_handler_t addr); + +extern void *set_except_vector(int n, void *addr); +extern unsigned long ebase; +extern void per_cpu_trap_init(void); + +/* + * See include/asm-ia64/system.h; prevents deadlock on SMP + * systems. + */ +#define __ARCH_WANT_UNLOCKED_CTXSW + +extern unsigned long arch_align_stack(unsigned long sp); + +#endif /* _ASM_SYSTEM_H */ diff --git a/arch/mips/include/asm/termbits.h b/arch/mips/include/asm/termbits.h new file mode 100644 index 000000000000..c83c68444e86 --- /dev/null +++ b/arch/mips/include/asm/termbits.h @@ -0,0 +1,226 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 99, 2001, 06 Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#ifndef _ASM_TERMBITS_H +#define _ASM_TERMBITS_H + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +/* + * The ABI says nothing about NCC but seems to use NCCS as + * replacement for it in struct termio + */ +#define NCCS 23 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 /* Interrupt character [ISIG]. */ +#define VQUIT 1 /* Quit character [ISIG]. */ +#define VERASE 2 /* Erase character [ICANON]. */ +#define VKILL 3 /* Kill-line character [ICANON]. */ +#define VMIN 4 /* Minimum number of bytes read at once [!ICANON]. */ +#define VTIME 5 /* Time-out value (tenths of a second) [!ICANON]. */ +#define VEOL2 6 /* Second EOL character [ICANON]. */ +#define VSWTC 7 /* ??? */ +#define VSWTCH VSWTC +#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF]. */ +#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF]. */ +#define VSUSP 10 /* Suspend character [ISIG]. */ +#if 0 +/* + * VDSUSP is not supported + */ +#define VDSUSP 11 /* Delayed suspend character [ISIG]. */ +#endif +#define VREPRINT 12 /* Reprint-line character [ICANON]. */ +#define VDISCARD 13 /* Discard character [IEXTEN]. */ +#define VWERASE 14 /* Word-erase character [ICANON]. */ +#define VLNEXT 15 /* Literal-next character [IEXTEN]. */ +#define VEOF 16 /* End-of-file character [ICANON]. */ +#define VEOL 17 /* End-of-line character [ICANON]. */ + +/* c_iflag bits */ +#define IGNBRK 0000001 /* Ignore break condition. */ +#define BRKINT 0000002 /* Signal interrupt on break. */ +#define IGNPAR 0000004 /* Ignore characters with parity errors. */ +#define PARMRK 0000010 /* Mark parity and framing errors. */ +#define INPCK 0000020 /* Enable input parity check. */ +#define ISTRIP 0000040 /* Strip 8th bit off characters. */ +#define INLCR 0000100 /* Map NL to CR on input. */ +#define IGNCR 0000200 /* Ignore CR. */ +#define ICRNL 0000400 /* Map CR to NL on input. */ +#define IUCLC 0001000 /* Map upper case to lower case on input. */ +#define IXON 0002000 /* Enable start/stop output control. */ +#define IXANY 0004000 /* Any character will restart after stop. */ +#define IXOFF 0010000 /* Enable start/stop input control. */ +#define IMAXBEL 0020000 /* Ring bell when input queue is full. */ +#define IUTF8 0040000 /* Input is UTF-8 */ + +/* c_oflag bits */ +#define OPOST 0000001 /* Perform output processing. */ +#define OLCUC 0000002 /* Map lower case to upper case on output. */ +#define ONLCR 0000004 /* Map NL to CR-NL on output. */ +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 +/* +#define PAGEOUT ??? +#define WRAP ??? + */ + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 /* Number of bits per byte (mask). */ +#define CS5 0000000 /* 5 bits per byte. */ +#define CS6 0000020 /* 6 bits per byte. */ +#define CS7 0000040 /* 7 bits per byte. */ +#define CS8 0000060 /* 8 bits per byte. */ +#define CSTOPB 0000100 /* Two stop bits instead of one. */ +#define CREAD 0000200 /* Enable receiver. */ +#define PARENB 0000400 /* Parity enable. */ +#define PARODD 0001000 /* Odd parity instead of even. */ +#define HUPCL 0002000 /* Hang up on last close. */ +#define CLOCAL 0004000 /* Ignore modem status lines. */ +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 /* Enable signals. */ +#define ICANON 0000002 /* Do erase and kill processing. */ +#define XCASE 0000004 +#define ECHO 0000010 /* Enable echo. */ +#define ECHOE 0000020 /* Visual erase for ERASE. */ +#define ECHOK 0000040 /* Echo NL after KILL. */ +#define ECHONL 0000100 /* Echo NL even if ECHO is off. */ +#define NOFLSH 0000200 /* Disable flush after interrupt. */ +#define IEXTEN 0000400 /* Enable DISCARD and LNEXT. */ +#define ECHOCTL 0001000 /* Echo control characters as ^X. */ +#define ECHOPRT 0002000 /* Hardcopy visual erase. */ +#define ECHOKE 0004000 /* Visual erase for KILL. */ +#define FLUSHO 0020000 +#define PENDIN 0040000 /* Retype pending input (state). */ +#define TOSTOP 0100000 /* Send SIGTTOU for background output. */ +#define ITOSTOP TOSTOP + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 /* Suspend output. */ +#define TCOON 1 /* Restart suspended output. */ +#define TCIOFF 2 /* Send a STOP character. */ +#define TCION 3 /* Send a START character. */ + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 /* Discard data received but not yet read. */ +#define TCOFLUSH 1 /* Discard data written but not yet sent. */ +#define TCIOFLUSH 2 /* Discard all pending data. */ + +/* tcsetattr uses these */ +#define TCSANOW TCSETS /* Change immediately. */ +#define TCSADRAIN TCSETSW /* Change when pending output is written. */ +#define TCSAFLUSH TCSETSF /* Flush pending input before changing. */ + +#endif /* _ASM_TERMBITS_H */ diff --git a/arch/mips/include/asm/termios.h b/arch/mips/include/asm/termios.h new file mode 100644 index 000000000000..a275661fa7e1 --- /dev/null +++ b/arch/mips/include/asm/termios.h @@ -0,0 +1,132 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1996, 2000, 2001 by Ralf Baechle + * Copyright (C) 2000, 2001 Silicon Graphics, Inc. + */ +#ifndef _ASM_TERMIOS_H +#define _ASM_TERMIOS_H + +#include +#include + +struct sgttyb { + char sg_ispeed; + char sg_ospeed; + char sg_erase; + char sg_kill; + int sg_flags; /* SGI special - int, not short */ +}; + +struct tchars { + char t_intrc; + char t_quitc; + char t_startc; + char t_stopc; + char t_eofc; + char t_brkc; +}; + +struct ltchars { + char t_suspc; /* stop process signal */ + char t_dsuspc; /* delayed stop process signal */ + char t_rprntc; /* reprint line */ + char t_flushc; /* flush output (toggles) */ + char t_werasc; /* word erase */ + char t_lnextc; /* literal next character */ +}; + +/* TIOCGSIZE, TIOCSSIZE not defined yet. Only needed for SunOS source + compatibility anyway ... */ + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + char c_line; /* line discipline */ + unsigned char c_cc[NCCS]; /* control characters */ +}; + +#ifdef __KERNEL__ +#include + +/* + * intr=^C quit=^\ erase=del kill=^U + * vmin=\1 vtime=\0 eol2=\0 swtc=\0 + * start=^Q stop=^S susp=^Z vdsusp= + * reprint=^R discard=^U werase=^W lnext=^V + * eof=^D eol=\0 + */ +#define INIT_C_CC "\003\034\177\025\1\0\0\0\021\023\032\0\022\017\027\026\004\0" +#endif + +/* modem lines */ +#define TIOCM_LE 0x001 /* line enable */ +#define TIOCM_DTR 0x002 /* data terminal ready */ +#define TIOCM_RTS 0x004 /* request to send */ +#define TIOCM_ST 0x010 /* secondary transmit */ +#define TIOCM_SR 0x020 /* secondary receive */ +#define TIOCM_CTS 0x040 /* clear to send */ +#define TIOCM_CAR 0x100 /* carrier detect */ +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RNG 0x200 /* ring */ +#define TIOCM_RI TIOCM_RNG +#define TIOCM_DSR 0x400 /* data set ready */ +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +#ifdef __KERNEL__ + +#include + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + unsigned short tmp; \ + get_user(tmp, &(termio)->c_iflag); \ + (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ + get_user(tmp, &(termio)->c_oflag); \ + (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ + get_user(tmp, &(termio)->c_cflag); \ + (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ + get_user(tmp, &(termio)->c_lflag); \ + (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ + get_user((termios)->c_line, &(termio)->c_line); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* defined(__KERNEL__) */ + +#endif /* _ASM_TERMIOS_H */ diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h new file mode 100644 index 000000000000..bb3060699df2 --- /dev/null +++ b/arch/mips/include/asm/thread_info.h @@ -0,0 +1,151 @@ +/* thread_info.h: MIPS low-level thread information + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + + +#ifndef __ASSEMBLY__ + +#include + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants + * must also be changed + */ +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + unsigned long tp_value; /* thread pointer */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + + mm_segment_t addr_limit; /* thread address space: + 0-0xBFFFFFFF for user-thead + 0-0xFFFFFFFF for kernel-thread + */ + struct restart_block restart_block; + struct pt_regs *regs; +}; + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = _TIF_FIXADE, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* How to get the thread information struct from C. */ +register struct thread_info *__current_thread_info __asm__("$28"); +#define current_thread_info() __current_thread_info + +/* thread information allocation */ +#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT) +#define THREAD_SIZE_ORDER (1) +#endif +#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_64BIT) +#define THREAD_SIZE_ORDER (2) +#endif +#ifdef CONFIG_PAGE_SIZE_8KB +#define THREAD_SIZE_ORDER (1) +#endif +#ifdef CONFIG_PAGE_SIZE_16KB +#define THREAD_SIZE_ORDER (0) +#endif +#ifdef CONFIG_PAGE_SIZE_64KB +#define THREAD_SIZE_ORDER (0) +#endif + +#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) +#define THREAD_MASK (THREAD_SIZE - 1UL) + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) \ +({ \ + struct thread_info *ret; \ + \ + ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \ + \ + ret; \ +}) +#else +#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif + +#define free_thread_info(info) kfree(info) + +#endif /* !__ASSEMBLY__ */ + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * thread information flags + * - these are process state flags that various assembly files may need to + * access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_SYSCALL_AUDIT 3 /* syscall auditing active */ +#define TIF_SECCOMP 4 /* secure computing */ +#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */ +#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ +#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 18 +#define TIF_FREEZE 19 +#define TIF_FIXADE 20 /* Fix address errors in software */ +#define TIF_LOGADE 21 /* Log address errors to syslog */ +#define TIF_32BIT_REGS 22 /* also implies 16/32 fprs */ +#define TIF_32BIT_ADDR 23 /* 32-bit address space (o32/n32) */ +#define TIF_FPUBOUND 24 /* thread bound to FPU-full CPU set */ +#define TIF_SYSCALL_TRACE 31 /* syscall trace active */ + +#define _TIF_SYSCALL_TRACE (1< +#include +#include +#include + +extern spinlock_t rtc_lock; + +/* + * RTC ops. By default, they point to weak no-op RTC functions. + * rtc_mips_set_time - reverse the above translation and set time to RTC. + * rtc_mips_set_mmss - similar to rtc_set_time, but only min and sec need + * to be set. Used by RTC sync-up. + */ +extern int rtc_mips_set_time(unsigned long); +extern int rtc_mips_set_mmss(unsigned long); + +/* + * board specific routines required by time_init(). + */ +extern void plat_time_init(void); + +/* + * mips_hpt_frequency - must be set if you intend to use an R4k-compatible + * counter as a timer interrupt source. + */ +extern unsigned int mips_hpt_frequency; + +/* + * The performance counter IRQ on MIPS is a close relative to the timer IRQ + * so it lives here. + */ +extern int (*perf_irq)(void); + +/* + * Initialize the calling CPU's compare interrupt as clockevent device + */ +#ifdef CONFIG_CEVT_R4K +extern int mips_clockevent_init(void); +extern unsigned int __weak get_c0_compare_int(void); +#else +static inline int mips_clockevent_init(void) +{ + return -ENXIO; +} +#endif + +/* + * Initialize the count register as a clocksource + */ +#ifdef CONFIG_CEVT_R4K +extern int init_mips_clocksource(void); +#else +static inline int init_mips_clocksource(void) +{ + return 0; +} +#endif + +extern void clocksource_set_clock(struct clocksource *cs, unsigned int clock); +extern void clockevent_set_clock(struct clock_event_device *cd, + unsigned int clock); + +#endif /* _ASM_TIME_H */ diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h new file mode 100644 index 000000000000..6529704aa73a --- /dev/null +++ b/arch/mips/include/asm/timex.h @@ -0,0 +1,43 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 1999, 2003 by Ralf Baechle + */ +#ifndef _ASM_TIMEX_H +#define _ASM_TIMEX_H + +#ifdef __KERNEL__ + +#include + +/* + * This is the clock rate of the i8253 PIT. A MIPS system may not have + * a PIT by the symbol is used all over the kernel including some APIs. + * So keeping it defined to the number for the PIT is the only sane thing + * for now. + */ +#define CLOCK_TICK_RATE 1193182 + +/* + * Standard way to access the cycle counter. + * Currently only used on SMP for scheduling. + * + * Only the low 32 bits are available as a continuously counting entity. + * But this only means we'll force a reschedule every 8 seconds or so, + * which isn't an evil thing. + * + * We know that all SMP capable CPUs have cycle counters. + */ + +typedef unsigned int cycles_t; + +static inline cycles_t get_cycles(void) +{ + return 0; +} + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TIMEX_H */ diff --git a/arch/mips/include/asm/titan_dep.h b/arch/mips/include/asm/titan_dep.h new file mode 100644 index 000000000000..fee1908c65d2 --- /dev/null +++ b/arch/mips/include/asm/titan_dep.h @@ -0,0 +1,231 @@ +/* + * Copyright 2003 PMC-Sierra + * Author: Manish Lachwani (lachwani@pmc-sierra.com) + * + * Board specific definititions for the PMC-Sierra Yosemite + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __TITAN_DEP_H__ +#define __TITAN_DEP_H__ + +#include /* for KSEG1ADDR() */ +#include /* for cpu_to_le32() */ + +#define TITAN_READ(ofs) \ + (*(volatile u32 *)(ocd_base+(ofs))) +#define TITAN_READ_16(ofs) \ + (*(volatile u16 *)(ocd_base+(ofs))) +#define TITAN_READ_8(ofs) \ + (*(volatile u8 *)(ocd_base+(ofs))) + +#define TITAN_WRITE(ofs, data) \ + do { *(volatile u32 *)(ocd_base+(ofs)) = (data); } while (0) +#define TITAN_WRITE_16(ofs, data) \ + do { *(volatile u16 *)(ocd_base+(ofs)) = (data); } while (0) +#define TITAN_WRITE_8(ofs, data) \ + do { *(volatile u8 *)(ocd_base+(ofs)) = (data); } while (0) + +/* + * PCI specific defines + */ +#define TITAN_PCI_0_CONFIG_ADDRESS 0x780 +#define TITAN_PCI_0_CONFIG_DATA 0x784 + +/* + * HT specific defines + */ +#define RM9000x2_HTLINK_REG 0xbb000644 +#define RM9000x2_BASE_ADDR 0xbb000000 + +#define OCD_BASE 0xfb000000UL +#define OCD_SIZE 0x3000UL + +extern unsigned long ocd_base; + +/* + * OCD Registers + */ +#define RM9000x2_OCD_LKB5 0x0128 /* Ethernet */ +#define RM9000x2_OCD_LKM5 0x012c + +#define RM9000x2_OCD_LKB7 0x0138 /* HT Region 0 */ +#define RM9000x2_OCD_LKM7 0x013c +#define RM9000x2_OCD_LKB8 0x0140 /* HT Region 1 */ +#define RM9000x2_OCD_LKM8 0x0144 + +#define RM9000x2_OCD_LKB9 0x0148 /* Local Bus */ +#define RM9000x2_OCD_LKM9 0x014c +#define RM9000x2_OCD_LKB10 0x0150 +#define RM9000x2_OCD_LKM10 0x0154 +#define RM9000x2_OCD_LKB11 0x0158 +#define RM9000x2_OCD_LKM11 0x015c +#define RM9000x2_OCD_LKB12 0x0160 +#define RM9000x2_OCD_LKM12 0x0164 + +#define RM9000x2_OCD_LKB13 0x0168 /* Scratch RAM */ +#define RM9000x2_OCD_LKM13 0x016c + +#define RM9000x2_OCD_LPD0 0x0200 /* Local Bus */ +#define RM9000x2_OCD_LPD1 0x0210 +#define RM9000x2_OCD_LPD2 0x0220 +#define RM9000x2_OCD_LPD3 0x0230 + +#define RM9000x2_OCD_HTDVID 0x0600 /* HT Device Header */ +#define RM9000x2_OCD_HTSC 0x0604 +#define RM9000x2_OCD_HTCCR 0x0608 +#define RM9000x2_OCD_HTBHL 0x060c +#define RM9000x2_OCD_HTBAR0 0x0610 +#define RM9000x2_OCD_HTBAR1 0x0614 +#define RM9000x2_OCD_HTBAR2 0x0618 +#define RM9000x2_OCD_HTBAR3 0x061c +#define RM9000x2_OCD_HTBAR4 0x0620 +#define RM9000x2_OCD_HTBAR5 0x0624 +#define RM9000x2_OCD_HTCBCPT 0x0628 +#define RM9000x2_OCD_HTSDVID 0x062c +#define RM9000x2_OCD_HTXRA 0x0630 +#define RM9000x2_OCD_HTCAP1 0x0634 +#define RM9000x2_OCD_HTIL 0x063c + +#define RM9000x2_OCD_HTLCC 0x0640 /* HT Capability Block */ +#define RM9000x2_OCD_HTLINK 0x0644 +#define RM9000x2_OCD_HTFQREV 0x0648 + +#define RM9000x2_OCD_HTERCTL 0x0668 /* HT Controller */ +#define RM9000x2_OCD_HTRXDB 0x066c +#define RM9000x2_OCD_HTIMPED 0x0670 +#define RM9000x2_OCD_HTSWIMP 0x0674 +#define RM9000x2_OCD_HTCAL 0x0678 + +#define RM9000x2_OCD_HTBAA30 0x0680 +#define RM9000x2_OCD_HTBAA54 0x0684 +#define RM9000x2_OCD_HTMASK0 0x0688 +#define RM9000x2_OCD_HTMASK1 0x068c +#define RM9000x2_OCD_HTMASK2 0x0690 +#define RM9000x2_OCD_HTMASK3 0x0694 +#define RM9000x2_OCD_HTMASK4 0x0698 +#define RM9000x2_OCD_HTMASK5 0x069c + +#define RM9000x2_OCD_HTIFCTL 0x06a0 +#define RM9000x2_OCD_HTPLL 0x06a4 + +#define RM9000x2_OCD_HTSRI 0x06b0 +#define RM9000x2_OCD_HTRXNUM 0x06b4 +#define RM9000x2_OCD_HTTXNUM 0x06b8 + +#define RM9000x2_OCD_HTTXCNT 0x06c8 + +#define RM9000x2_OCD_HTERROR 0x06d8 +#define RM9000x2_OCD_HTRCRCE 0x06dc +#define RM9000x2_OCD_HTEOI 0x06e0 + +#define RM9000x2_OCD_CRCR 0x06f0 + +#define RM9000x2_OCD_HTCFGA 0x06f8 +#define RM9000x2_OCD_HTCFGD 0x06fc + +#define RM9000x2_OCD_INTMSG 0x0a00 + +#define RM9000x2_OCD_INTPIN0 0x0a40 +#define RM9000x2_OCD_INTPIN1 0x0a44 +#define RM9000x2_OCD_INTPIN2 0x0a48 +#define RM9000x2_OCD_INTPIN3 0x0a4c +#define RM9000x2_OCD_INTPIN4 0x0a50 +#define RM9000x2_OCD_INTPIN5 0x0a54 +#define RM9000x2_OCD_INTPIN6 0x0a58 +#define RM9000x2_OCD_INTPIN7 0x0a5c +#define RM9000x2_OCD_SEM 0x0a60 +#define RM9000x2_OCD_SEMSET 0x0a64 +#define RM9000x2_OCD_SEMCLR 0x0a68 + +#define RM9000x2_OCD_TKT 0x0a70 +#define RM9000x2_OCD_TKTINC 0x0a74 + +#define RM9000x2_OCD_NMICONFIG 0x0ac0 /* Interrupts */ +#define RM9000x2_OCD_INTP0PRI 0x1a80 +#define RM9000x2_OCD_INTP1PRI 0x1a80 +#define RM9000x2_OCD_INTP0STATUS0 0x1b00 +#define RM9000x2_OCD_INTP0MASK0 0x1b04 +#define RM9000x2_OCD_INTP0SET0 0x1b08 +#define RM9000x2_OCD_INTP0CLEAR0 0x1b0c +#define RM9000x2_OCD_INTP0STATUS1 0x1b10 +#define RM9000x2_OCD_INTP0MASK1 0x1b14 +#define RM9000x2_OCD_INTP0SET1 0x1b18 +#define RM9000x2_OCD_INTP0CLEAR1 0x1b1c +#define RM9000x2_OCD_INTP0STATUS2 0x1b20 +#define RM9000x2_OCD_INTP0MASK2 0x1b24 +#define RM9000x2_OCD_INTP0SET2 0x1b28 +#define RM9000x2_OCD_INTP0CLEAR2 0x1b2c +#define RM9000x2_OCD_INTP0STATUS3 0x1b30 +#define RM9000x2_OCD_INTP0MASK3 0x1b34 +#define RM9000x2_OCD_INTP0SET3 0x1b38 +#define RM9000x2_OCD_INTP0CLEAR3 0x1b3c +#define RM9000x2_OCD_INTP0STATUS4 0x1b40 +#define RM9000x2_OCD_INTP0MASK4 0x1b44 +#define RM9000x2_OCD_INTP0SET4 0x1b48 +#define RM9000x2_OCD_INTP0CLEAR4 0x1b4c +#define RM9000x2_OCD_INTP0STATUS5 0x1b50 +#define RM9000x2_OCD_INTP0MASK5 0x1b54 +#define RM9000x2_OCD_INTP0SET5 0x1b58 +#define RM9000x2_OCD_INTP0CLEAR5 0x1b5c +#define RM9000x2_OCD_INTP0STATUS6 0x1b60 +#define RM9000x2_OCD_INTP0MASK6 0x1b64 +#define RM9000x2_OCD_INTP0SET6 0x1b68 +#define RM9000x2_OCD_INTP0CLEAR6 0x1b6c +#define RM9000x2_OCD_INTP0STATUS7 0x1b70 +#define RM9000x2_OCD_INTP0MASK7 0x1b74 +#define RM9000x2_OCD_INTP0SET7 0x1b78 +#define RM9000x2_OCD_INTP0CLEAR7 0x1b7c +#define RM9000x2_OCD_INTP1STATUS0 0x2b00 +#define RM9000x2_OCD_INTP1MASK0 0x2b04 +#define RM9000x2_OCD_INTP1SET0 0x2b08 +#define RM9000x2_OCD_INTP1CLEAR0 0x2b0c +#define RM9000x2_OCD_INTP1STATUS1 0x2b10 +#define RM9000x2_OCD_INTP1MASK1 0x2b14 +#define RM9000x2_OCD_INTP1SET1 0x2b18 +#define RM9000x2_OCD_INTP1CLEAR1 0x2b1c +#define RM9000x2_OCD_INTP1STATUS2 0x2b20 +#define RM9000x2_OCD_INTP1MASK2 0x2b24 +#define RM9000x2_OCD_INTP1SET2 0x2b28 +#define RM9000x2_OCD_INTP1CLEAR2 0x2b2c +#define RM9000x2_OCD_INTP1STATUS3 0x2b30 +#define RM9000x2_OCD_INTP1MASK3 0x2b34 +#define RM9000x2_OCD_INTP1SET3 0x2b38 +#define RM9000x2_OCD_INTP1CLEAR3 0x2b3c +#define RM9000x2_OCD_INTP1STATUS4 0x2b40 +#define RM9000x2_OCD_INTP1MASK4 0x2b44 +#define RM9000x2_OCD_INTP1SET4 0x2b48 +#define RM9000x2_OCD_INTP1CLEAR4 0x2b4c +#define RM9000x2_OCD_INTP1STATUS5 0x2b50 +#define RM9000x2_OCD_INTP1MASK5 0x2b54 +#define RM9000x2_OCD_INTP1SET5 0x2b58 +#define RM9000x2_OCD_INTP1CLEAR5 0x2b5c +#define RM9000x2_OCD_INTP1STATUS6 0x2b60 +#define RM9000x2_OCD_INTP1MASK6 0x2b64 +#define RM9000x2_OCD_INTP1SET6 0x2b68 +#define RM9000x2_OCD_INTP1CLEAR6 0x2b6c +#define RM9000x2_OCD_INTP1STATUS7 0x2b70 +#define RM9000x2_OCD_INTP1MASK7 0x2b74 +#define RM9000x2_OCD_INTP1SET7 0x2b78 +#define RM9000x2_OCD_INTP1CLEAR7 0x2b7c + +#define OCD_READ(reg) (*(volatile unsigned int *)(ocd_base + (reg))) +#define OCD_WRITE(reg, val) \ + do { *(volatile unsigned int *)(ocd_base + (reg)) = (val); } while (0) + +/* + * Hypertransport specific macros + */ +#define RM9K_WRITE(ofs, data) *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs) = data +#define RM9K_WRITE_8(ofs, data) *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs) = data +#define RM9K_WRITE_16(ofs, data) *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs) = data + +#define RM9K_READ(ofs, val) *(val) = *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs) +#define RM9K_READ_8(ofs, val) *(val) = *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs) +#define RM9K_READ_16(ofs, val) *(val) = *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs) + +#endif diff --git a/arch/mips/include/asm/tlb.h b/arch/mips/include/asm/tlb.h new file mode 100644 index 000000000000..80d9dfcf1e88 --- /dev/null +++ b/arch/mips/include/asm/tlb.h @@ -0,0 +1,23 @@ +#ifndef __ASM_TLB_H +#define __ASM_TLB_H + +/* + * MIPS doesn't need any special per-pte or per-vma handling, except + * we need to flush cache for area to be unmapped. + */ +#define tlb_start_vma(tlb, vma) \ + do { \ + if (!tlb->fullmm) \ + flush_cache_range(vma, vma->vm_start, vma->vm_end); \ + } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) + +/* + * .. because we flush the whole mm when it fills up. + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include + +#endif /* __ASM_TLB_H */ diff --git a/arch/mips/include/asm/tlbdebug.h b/arch/mips/include/asm/tlbdebug.h new file mode 100644 index 000000000000..bb8f5c29c3d9 --- /dev/null +++ b/arch/mips/include/asm/tlbdebug.h @@ -0,0 +1,16 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002 by Ralf Baechle + */ +#ifndef __ASM_TLBDEBUG_H +#define __ASM_TLBDEBUG_H + +/* + * TLB debugging functions: + */ +extern void dump_tlb_all(void); + +#endif /* __ASM_TLBDEBUG_H */ diff --git a/arch/mips/include/asm/tlbflush.h b/arch/mips/include/asm/tlbflush.h new file mode 100644 index 000000000000..86b21de12e91 --- /dev/null +++ b/arch/mips/include/asm/tlbflush.h @@ -0,0 +1,47 @@ +#ifndef __ASM_TLBFLUSH_H +#define __ASM_TLBFLUSH_H + +#include + +/* + * TLB flushing: + * + * - flush_tlb_all() flushes all processes TLB entries + * - flush_tlb_mm(mm) flushes the specified mm context TLB entries + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + */ +extern void local_flush_tlb_all(void); +extern void local_flush_tlb_mm(struct mm_struct *mm); +extern void local_flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end); +extern void local_flush_tlb_kernel_range(unsigned long start, + unsigned long end); +extern void local_flush_tlb_page(struct vm_area_struct *vma, + unsigned long page); +extern void local_flush_tlb_one(unsigned long vaddr); + +#ifdef CONFIG_SMP + +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long, + unsigned long); +extern void flush_tlb_kernel_range(unsigned long, unsigned long); +extern void flush_tlb_page(struct vm_area_struct *, unsigned long); +extern void flush_tlb_one(unsigned long vaddr); + +#else /* CONFIG_SMP */ + +#define flush_tlb_all() local_flush_tlb_all() +#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#define flush_tlb_range(vma, vmaddr, end) local_flush_tlb_range(vma, vmaddr, end) +#define flush_tlb_kernel_range(vmaddr,end) \ + local_flush_tlb_kernel_range(vmaddr, end) +#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) +#define flush_tlb_one(vaddr) local_flush_tlb_one(vaddr) + +#endif /* CONFIG_SMP */ + +#endif /* __ASM_TLBFLUSH_H */ diff --git a/arch/mips/include/asm/topology.h b/arch/mips/include/asm/topology.h new file mode 100644 index 000000000000..259145e07e97 --- /dev/null +++ b/arch/mips/include/asm/topology.h @@ -0,0 +1,17 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 by Ralf Baechle + */ +#ifndef __ASM_TOPOLOGY_H +#define __ASM_TOPOLOGY_H + +#include + +#ifdef CONFIG_SMP +#define smt_capable() (smp_num_siblings > 1) +#endif + +#endif /* __ASM_TOPOLOGY_H */ diff --git a/arch/mips/include/asm/traps.h b/arch/mips/include/asm/traps.h new file mode 100644 index 000000000000..90ff2f497c50 --- /dev/null +++ b/arch/mips/include/asm/traps.h @@ -0,0 +1,28 @@ +/* + * Trap handling definitions. + * + * Copyright (C) 2002, 2003 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _ASM_TRAPS_H +#define _ASM_TRAPS_H + +/* + * Possible status responses for a board_be_handler backend. + */ +#define MIPS_BE_DISCARD 0 /* return with no action */ +#define MIPS_BE_FIXUP 1 /* return to the fixup code */ +#define MIPS_BE_FATAL 2 /* treat as an unrecoverable error */ + +extern void (*board_be_init)(void); +extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup); + +extern void (*board_nmi_handler_setup)(void); +extern void (*board_ejtag_handler_setup)(void); +extern void (*board_bind_eic_interrupt)(int irq, int regset); + +#endif /* _ASM_TRAPS_H */ diff --git a/arch/mips/include/asm/txx9/boards.h b/arch/mips/include/asm/txx9/boards.h new file mode 100644 index 000000000000..cbe9476d963e --- /dev/null +++ b/arch/mips/include/asm/txx9/boards.h @@ -0,0 +1,13 @@ +#ifdef CONFIG_TOSHIBA_JMR3927 +BOARD_VEC(jmr3927_vec) +#endif +#ifdef CONFIG_TOSHIBA_RBTX4927 +BOARD_VEC(rbtx4927_vec) +BOARD_VEC(rbtx4937_vec) +#endif +#ifdef CONFIG_TOSHIBA_RBTX4938 +BOARD_VEC(rbtx4938_vec) +#endif +#ifdef CONFIG_TOSHIBA_RBTX4939 +BOARD_VEC(rbtx4939_vec) +#endif diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h new file mode 100644 index 000000000000..4316a3e57678 --- /dev/null +++ b/arch/mips/include/asm/txx9/generic.h @@ -0,0 +1,89 @@ +/* + * linux/include/asm-mips/txx9/generic.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9_GENERIC_H +#define __ASM_TXX9_GENERIC_H + +#include +#include /* for struct resource */ + +extern struct resource txx9_ce_res[]; +#define TXX9_CE(n) (unsigned long)(txx9_ce_res[(n)].start) +extern unsigned int txx9_pcode; +extern char txx9_pcode_str[8]; +void txx9_reg_res_init(unsigned int pcode, unsigned long base, + unsigned long size); + +extern unsigned int txx9_master_clock; +extern unsigned int txx9_cpu_clock; +extern unsigned int txx9_gbus_clock; +#define TXX9_IMCLK (txx9_gbus_clock / 2) + +extern int txx9_ccfg_toeon; +struct uart_port; +int early_serial_txx9_setup(struct uart_port *port); + +struct pci_dev; +struct txx9_board_vec { + const char *system; + void (*prom_init)(void); + void (*mem_setup)(void); + void (*irq_setup)(void); + void (*time_init)(void); + void (*arch_init)(void); + void (*device_init)(void); +#ifdef CONFIG_PCI + int (*pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); +#endif +}; +extern struct txx9_board_vec *txx9_board_vec; +extern int (*txx9_irq_dispatch)(int pending); +char *prom_getcmdline(void); +const char *prom_getenv(const char *name); +void txx9_wdt_init(unsigned long base); +void txx9_wdt_now(unsigned long base); +void txx9_spi_init(int busid, unsigned long base, int irq); +void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr); +void txx9_sio_init(unsigned long baseaddr, int irq, + unsigned int line, unsigned int sclk, int nocts); +void prom_putchar(char c); +#ifdef CONFIG_EARLY_PRINTK +extern void (*txx9_prom_putchar)(char c); +void txx9_sio_putchar_init(unsigned long baseaddr); +#else +static inline void txx9_sio_putchar_init(unsigned long baseaddr) +{ +} +#endif + +struct physmap_flash_data; +void txx9_physmap_flash_init(int no, unsigned long addr, unsigned long size, + const struct physmap_flash_data *pdata); + +/* 8 bit version of __fls(): find first bit set (returns 0..7) */ +static inline unsigned int __fls8(unsigned char x) +{ + int r = 7; + + if (!(x & 0xf0)) { + r -= 4; + x <<= 4; + } + if (!(x & 0xc0)) { + r -= 2; + x <<= 2; + } + if (!(x & 0x80)) + r -= 1; + return r; +} + +void txx9_iocled_init(unsigned long baseaddr, + int basenum, unsigned int num, int lowactive, + const char *color, char **deftriggers); + +#endif /* __ASM_TXX9_GENERIC_H */ diff --git a/arch/mips/include/asm/txx9/jmr3927.h b/arch/mips/include/asm/txx9/jmr3927.h new file mode 100644 index 000000000000..a409c446bf18 --- /dev/null +++ b/arch/mips/include/asm/txx9/jmr3927.h @@ -0,0 +1,180 @@ +/* + * Defines for the TJSYS JMR-TX3927 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2001 Toshiba Corporation + */ +#ifndef __ASM_TXX9_JMR3927_H +#define __ASM_TXX9_JMR3927_H + +#include +#include +#include +#include + +/* CS */ +#define JMR3927_ROMCE0 0x1fc00000 /* 4M */ +#define JMR3927_ROMCE1 0x1e000000 /* 4M */ +#define JMR3927_ROMCE2 0x14000000 /* 16M */ +#define JMR3927_ROMCE3 0x10000000 /* 64M */ +#define JMR3927_ROMCE5 0x1d000000 /* 4M */ +#define JMR3927_SDCS0 0x00000000 /* 32M */ +#define JMR3927_SDCS1 0x02000000 /* 32M */ +/* PCI Direct Mappings */ + +#define JMR3927_PCIMEM 0x08000000 +#define JMR3927_PCIMEM_SIZE 0x08000000 /* 128M */ +#define JMR3927_PCIIO 0x15000000 +#define JMR3927_PCIIO_SIZE 0x01000000 /* 16M */ + +#define JMR3927_SDRAM_SIZE 0x02000000 /* 32M */ +#define JMR3927_PORT_BASE KSEG1 + +/* Address map (virtual address) */ +#define JMR3927_ROM0_BASE (KSEG1 + JMR3927_ROMCE0) +#define JMR3927_ROM1_BASE (KSEG1 + JMR3927_ROMCE1) +#define JMR3927_IOC_BASE (KSEG1 + JMR3927_ROMCE2) +#define JMR3927_PCIMEM_BASE (KSEG1 + JMR3927_PCIMEM) +#define JMR3927_PCIIO_BASE (KSEG1 + JMR3927_PCIIO) + +#define JMR3927_IOC_REV_ADDR (JMR3927_IOC_BASE + 0x00000000) +#define JMR3927_IOC_NVRAMB_ADDR (JMR3927_IOC_BASE + 0x00010000) +#define JMR3927_IOC_LED_ADDR (JMR3927_IOC_BASE + 0x00020000) +#define JMR3927_IOC_DIPSW_ADDR (JMR3927_IOC_BASE + 0x00030000) +#define JMR3927_IOC_BREV_ADDR (JMR3927_IOC_BASE + 0x00040000) +#define JMR3927_IOC_DTR_ADDR (JMR3927_IOC_BASE + 0x00050000) +#define JMR3927_IOC_INTS1_ADDR (JMR3927_IOC_BASE + 0x00080000) +#define JMR3927_IOC_INTS2_ADDR (JMR3927_IOC_BASE + 0x00090000) +#define JMR3927_IOC_INTM_ADDR (JMR3927_IOC_BASE + 0x000a0000) +#define JMR3927_IOC_INTP_ADDR (JMR3927_IOC_BASE + 0x000b0000) +#define JMR3927_IOC_RESET_ADDR (JMR3927_IOC_BASE + 0x000f0000) + +/* Flash ROM */ +#define JMR3927_FLASH_BASE (JMR3927_ROM0_BASE) +#define JMR3927_FLASH_SIZE 0x00400000 + +/* bits for IOC_REV/IOC_BREV (high byte) */ +#define JMR3927_IDT_MASK 0xfc +#define JMR3927_REV_MASK 0x03 +#define JMR3927_IOC_IDT 0xe0 + +/* bits for IOC_INTS1/IOC_INTS2/IOC_INTM/IOC_INTP (high byte) */ +#define JMR3927_IOC_INTB_PCIA 0 +#define JMR3927_IOC_INTB_PCIB 1 +#define JMR3927_IOC_INTB_PCIC 2 +#define JMR3927_IOC_INTB_PCID 3 +#define JMR3927_IOC_INTB_MODEM 4 +#define JMR3927_IOC_INTB_INT6 5 +#define JMR3927_IOC_INTB_INT7 6 +#define JMR3927_IOC_INTB_SOFT 7 +#define JMR3927_IOC_INTF_PCIA (1 << JMR3927_IOC_INTF_PCIA) +#define JMR3927_IOC_INTF_PCIB (1 << JMR3927_IOC_INTB_PCIB) +#define JMR3927_IOC_INTF_PCIC (1 << JMR3927_IOC_INTB_PCIC) +#define JMR3927_IOC_INTF_PCID (1 << JMR3927_IOC_INTB_PCID) +#define JMR3927_IOC_INTF_MODEM (1 << JMR3927_IOC_INTB_MODEM) +#define JMR3927_IOC_INTF_INT6 (1 << JMR3927_IOC_INTB_INT6) +#define JMR3927_IOC_INTF_INT7 (1 << JMR3927_IOC_INTB_INT7) +#define JMR3927_IOC_INTF_SOFT (1 << JMR3927_IOC_INTB_SOFT) + +/* bits for IOC_RESET (high byte) */ +#define JMR3927_IOC_RESET_CPU 1 +#define JMR3927_IOC_RESET_PCI 2 + +#if defined(__BIG_ENDIAN) +#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)(a)) = (d)) +#define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)(a)) +#elif defined(__LITTLE_ENDIAN) +#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)((a)^1)) = (d)) +#define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)((a)^1)) +#else +#error "No Endian" +#endif + +/* LED macro */ +#define jmr3927_led_set(n/*0-16*/) jmr3927_ioc_reg_out(~(n), JMR3927_IOC_LED_ADDR) + +#define jmr3927_led_and_set(n/*0-16*/) jmr3927_ioc_reg_out((~(n)) & jmr3927_ioc_reg_in(JMR3927_IOC_LED_ADDR), JMR3927_IOC_LED_ADDR) + +/* DIPSW4 macro */ +#define jmr3927_dipsw1() (gpio_get_value(11) == 0) +#define jmr3927_dipsw2() (gpio_get_value(10) == 0) +#define jmr3927_dipsw3() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 2) == 0) +#define jmr3927_dipsw4() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 1) == 0) + +/* + * IRQ mappings + */ + +/* These are the virtual IRQ numbers, we divide all IRQ's into + * 'spaces', the 'space' determines where and how to enable/disable + * that particular IRQ on an JMR machine. Add new 'spaces' as new + * IRQ hardware is supported. + */ +#define JMR3927_NR_IRQ_IRC 16 /* On-Chip IRC */ +#define JMR3927_NR_IRQ_IOC 8 /* PCI/MODEM/INT[6:7] */ + +#define JMR3927_IRQ_IRC TXX9_IRQ_BASE +#define JMR3927_IRQ_IOC (JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC) +#define JMR3927_IRQ_END (JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC) + +#define JMR3927_IRQ_IRC_INT0 (JMR3927_IRQ_IRC + TX3927_IR_INT0) +#define JMR3927_IRQ_IRC_INT1 (JMR3927_IRQ_IRC + TX3927_IR_INT1) +#define JMR3927_IRQ_IRC_INT2 (JMR3927_IRQ_IRC + TX3927_IR_INT2) +#define JMR3927_IRQ_IRC_INT3 (JMR3927_IRQ_IRC + TX3927_IR_INT3) +#define JMR3927_IRQ_IRC_INT4 (JMR3927_IRQ_IRC + TX3927_IR_INT4) +#define JMR3927_IRQ_IRC_INT5 (JMR3927_IRQ_IRC + TX3927_IR_INT5) +#define JMR3927_IRQ_IRC_SIO0 (JMR3927_IRQ_IRC + TX3927_IR_SIO0) +#define JMR3927_IRQ_IRC_SIO1 (JMR3927_IRQ_IRC + TX3927_IR_SIO1) +#define JMR3927_IRQ_IRC_SIO(ch) (JMR3927_IRQ_IRC + TX3927_IR_SIO(ch)) +#define JMR3927_IRQ_IRC_DMA (JMR3927_IRQ_IRC + TX3927_IR_DMA) +#define JMR3927_IRQ_IRC_PIO (JMR3927_IRQ_IRC + TX3927_IR_PIO) +#define JMR3927_IRQ_IRC_PCI (JMR3927_IRQ_IRC + TX3927_IR_PCI) +#define JMR3927_IRQ_IRC_TMR(ch) (JMR3927_IRQ_IRC + TX3927_IR_TMR(ch)) +#define JMR3927_IRQ_IOC_PCIA (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA) +#define JMR3927_IRQ_IOC_PCIB (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB) +#define JMR3927_IRQ_IOC_PCIC (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC) +#define JMR3927_IRQ_IOC_PCID (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCID) +#define JMR3927_IRQ_IOC_MODEM (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_MODEM) +#define JMR3927_IRQ_IOC_INT6 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT6) +#define JMR3927_IRQ_IOC_INT7 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT7) +#define JMR3927_IRQ_IOC_SOFT (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_SOFT) + +/* IOC (PCI, MODEM) */ +#define JMR3927_IRQ_IOCINT JMR3927_IRQ_IRC_INT1 +/* TC35815 100M Ether (JMR-TX3912:JPW4:2-3 Short) */ +#define JMR3927_IRQ_ETHER0 JMR3927_IRQ_IRC_INT3 + +/* Clocks */ +#define JMR3927_CORECLK 132710400 /* 132.7MHz */ + +/* + * TX3927 Pin Configuration: + * + * PCFG bits Avail Dead + * SELSIO[1:0]:11 RXD[1:0], TXD[1:0] PIO[6:3] + * SELSIOC[0]:1 CTS[0], RTS[0] INT[5:4] + * SELSIOC[1]:0,SELDSF:0, GSDAO[0],GPCST[3] CTS[1], RTS[1],DSF, + * GDBGE* PIO[2:1] + * SELDMA[2]:1 DMAREQ[2],DMAACK[2] PIO[13:12] + * SELTMR[2:0]:000 TIMER[1:0] + * SELCS:0,SELDMA[1]:0 PIO[11;10] SDCS_CE[7:6], + * DMAREQ[1],DMAACK[1] + * SELDMA[0]:1 DMAREQ[0],DMAACK[0] PIO[9:8] + * SELDMA[3]:1 DMAREQ[3],DMAACK[3] PIO[15:14] + * SELDONE:1 DMADONE PIO[7] + * + * Usable pins are: + * RXD[1;0],TXD[1:0],CTS[0],RTS[0], + * DMAREQ[0,2,3],DMAACK[0,2,3],DMADONE,PIO[0,10,11] + * INT[3:0] + */ + +void jmr3927_prom_init(void); +void jmr3927_irq_setup(void); +struct pci_dev; +int jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + +#endif /* __ASM_TXX9_JMR3927_H */ diff --git a/arch/mips/include/asm/txx9/pci.h b/arch/mips/include/asm/txx9/pci.h new file mode 100644 index 000000000000..3d32529060aa --- /dev/null +++ b/arch/mips/include/asm/txx9/pci.h @@ -0,0 +1,39 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9_PCI_H +#define __ASM_TXX9_PCI_H + +#include + +extern struct pci_controller txx9_primary_pcic; +struct pci_controller * +txx9_alloc_pci_controller(struct pci_controller *pcic, + unsigned long mem_base, unsigned long mem_size, + unsigned long io_base, unsigned long io_size); + +int txx9_pci66_check(struct pci_controller *hose, int top_bus, + int current_bus); +extern int txx9_pci_mem_high __initdata; + +extern int txx9_pci_option; +#define TXX9_PCI_OPT_PICMG 0x0002 +#define TXX9_PCI_OPT_CLK_33 0x0008 +#define TXX9_PCI_OPT_CLK_66 0x0010 +#define TXX9_PCI_OPT_CLK_MASK \ + (TXX9_PCI_OPT_CLK_33 | TXX9_PCI_OPT_CLK_66) +#define TXX9_PCI_OPT_CLK_AUTO TXX9_PCI_OPT_CLK_MASK + +enum txx9_pci_err_action { + TXX9_PCI_ERR_REPORT, + TXX9_PCI_ERR_IGNORE, + TXX9_PCI_ERR_PANIC, +}; +extern enum txx9_pci_err_action txx9_pci_err_action; + +extern char * (*txx9_board_pcibios_setup)(char *str); +char *txx9_pcibios_setup(char *str); + +#endif /* __ASM_TXX9_PCI_H */ diff --git a/arch/mips/include/asm/txx9/rbtx4927.h b/arch/mips/include/asm/txx9/rbtx4927.h new file mode 100644 index 000000000000..b2adab3d1acc --- /dev/null +++ b/arch/mips/include/asm/txx9/rbtx4927.h @@ -0,0 +1,92 @@ +/* + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_TXX9_RBTX4927_H +#define __ASM_TXX9_RBTX4927_H + +#include + +#define RBTX4927_PCIMEM 0x08000000 +#define RBTX4927_PCIMEM_SIZE 0x08000000 +#define RBTX4927_PCIIO 0x16000000 +#define RBTX4927_PCIIO_SIZE 0x01000000 + +#define RBTX4927_LED_ADDR (IO_BASE + TXX9_CE(2) + 0x00001000) +#define RBTX4927_IMASK_ADDR (IO_BASE + TXX9_CE(2) + 0x00002000) +#define RBTX4927_IMSTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x00002006) +#define RBTX4927_SOFTINT_ADDR (IO_BASE + TXX9_CE(2) + 0x00003000) +#define RBTX4927_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f000) +#define RBTX4927_SOFTRESETLOCK_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f002) +#define RBTX4927_PCIRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f006) +#define RBTX4927_BRAMRTC_BASE (IO_BASE + TXX9_CE(2) + 0x00010000) +#define RBTX4927_ETHER_BASE (IO_BASE + TXX9_CE(2) + 0x00020000) + +/* Ethernet port address */ +#define RBTX4927_ETHER_ADDR (RBTX4927_ETHER_BASE + 0x280) + +#define rbtx4927_imask_addr ((__u8 __iomem *)RBTX4927_IMASK_ADDR) +#define rbtx4927_imstat_addr ((__u8 __iomem *)RBTX4927_IMSTAT_ADDR) +#define rbtx4927_softint_addr ((__u8 __iomem *)RBTX4927_SOFTINT_ADDR) +#define rbtx4927_softreset_addr ((__u8 __iomem *)RBTX4927_SOFTRESET_ADDR) +#define rbtx4927_softresetlock_addr \ + ((__u8 __iomem *)RBTX4927_SOFTRESETLOCK_ADDR) +#define rbtx4927_pcireset_addr ((__u8 __iomem *)RBTX4927_PCIRESET_ADDR) + +/* bits for ISTAT/IMASK/IMSTAT */ +#define RBTX4927_INTB_PCID 0 +#define RBTX4927_INTB_PCIC 1 +#define RBTX4927_INTB_PCIB 2 +#define RBTX4927_INTB_PCIA 3 +#define RBTX4927_INTF_PCID (1 << RBTX4927_INTB_PCID) +#define RBTX4927_INTF_PCIC (1 << RBTX4927_INTB_PCIC) +#define RBTX4927_INTF_PCIB (1 << RBTX4927_INTB_PCIB) +#define RBTX4927_INTF_PCIA (1 << RBTX4927_INTB_PCIA) + +#define RBTX4927_NR_IRQ_IOC 8 /* IOC */ + +#define RBTX4927_IRQ_IOC (TXX9_IRQ_BASE + TX4927_NUM_IR) +#define RBTX4927_IRQ_IOC_PCID (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCID) +#define RBTX4927_IRQ_IOC_PCIC (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIC) +#define RBTX4927_IRQ_IOC_PCIB (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIB) +#define RBTX4927_IRQ_IOC_PCIA (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIA) + +#define RBTX4927_IRQ_IOCINT (TXX9_IRQ_BASE + TX4927_IR_INT(1)) + +#ifdef CONFIG_PCI +#define RBTX4927_ISA_IO_OFFSET RBTX4927_PCIIO +#else +#define RBTX4927_ISA_IO_OFFSET 0 +#endif + +#define RBTX4927_RTL_8019_BASE (RBTX4927_ETHER_ADDR - mips_io_port_base) +#define RBTX4927_RTL_8019_IRQ (TXX9_IRQ_BASE + TX4927_IR_INT(3)) + +void rbtx4927_prom_init(void); +void rbtx4927_irq_setup(void); +struct pci_dev; +int rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + +#endif /* __ASM_TXX9_RBTX4927_H */ diff --git a/arch/mips/include/asm/txx9/rbtx4938.h b/arch/mips/include/asm/txx9/rbtx4938.h new file mode 100644 index 000000000000..9f0441a28126 --- /dev/null +++ b/arch/mips/include/asm/txx9/rbtx4938.h @@ -0,0 +1,145 @@ +/* + * Definitions for TX4937/TX4938 + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#ifndef __ASM_TXX9_RBTX4938_H +#define __ASM_TXX9_RBTX4938_H + +#include +#include +#include + +/* Address map */ +#define RBTX4938_FPGA_REG_ADDR (IO_BASE + TXX9_CE(2) + 0x00000000) +#define RBTX4938_FPGA_REV_ADDR (IO_BASE + TXX9_CE(2) + 0x00000002) +#define RBTX4938_CONFIG1_ADDR (IO_BASE + TXX9_CE(2) + 0x00000004) +#define RBTX4938_CONFIG2_ADDR (IO_BASE + TXX9_CE(2) + 0x00000006) +#define RBTX4938_CONFIG3_ADDR (IO_BASE + TXX9_CE(2) + 0x00000008) +#define RBTX4938_LED_ADDR (IO_BASE + TXX9_CE(2) + 0x00001000) +#define RBTX4938_DIPSW_ADDR (IO_BASE + TXX9_CE(2) + 0x00001002) +#define RBTX4938_BDIPSW_ADDR (IO_BASE + TXX9_CE(2) + 0x00001004) +#define RBTX4938_IMASK_ADDR (IO_BASE + TXX9_CE(2) + 0x00002000) +#define RBTX4938_IMASK2_ADDR (IO_BASE + TXX9_CE(2) + 0x00002002) +#define RBTX4938_INTPOL_ADDR (IO_BASE + TXX9_CE(2) + 0x00002004) +#define RBTX4938_ISTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x00002006) +#define RBTX4938_ISTAT2_ADDR (IO_BASE + TXX9_CE(2) + 0x00002008) +#define RBTX4938_IMSTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x0000200a) +#define RBTX4938_IMSTAT2_ADDR (IO_BASE + TXX9_CE(2) + 0x0000200c) +#define RBTX4938_SOFTINT_ADDR (IO_BASE + TXX9_CE(2) + 0x00003000) +#define RBTX4938_PIOSEL_ADDR (IO_BASE + TXX9_CE(2) + 0x00005000) +#define RBTX4938_SPICS_ADDR (IO_BASE + TXX9_CE(2) + 0x00005002) +#define RBTX4938_SFPWR_ADDR (IO_BASE + TXX9_CE(2) + 0x00005008) +#define RBTX4938_SFVOL_ADDR (IO_BASE + TXX9_CE(2) + 0x0000500a) +#define RBTX4938_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007000) +#define RBTX4938_SOFTRESETLOCK_ADDR (IO_BASE + TXX9_CE(2) + 0x00007002) +#define RBTX4938_PCIRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007004) +#define RBTX4938_ETHER_BASE (IO_BASE + TXX9_CE(2) + 0x00020000) + +/* Ethernet port address (Jumperless Mode (W12:Open)) */ +#define RBTX4938_ETHER_ADDR (RBTX4938_ETHER_BASE + 0x280) + +/* bits for ISTAT/IMASK/IMSTAT */ +#define RBTX4938_INTB_PCID 0 +#define RBTX4938_INTB_PCIC 1 +#define RBTX4938_INTB_PCIB 2 +#define RBTX4938_INTB_PCIA 3 +#define RBTX4938_INTB_RTC 4 +#define RBTX4938_INTB_ATA 5 +#define RBTX4938_INTB_MODEM 6 +#define RBTX4938_INTB_SWINT 7 +#define RBTX4938_INTF_PCID (1 << RBTX4938_INTB_PCID) +#define RBTX4938_INTF_PCIC (1 << RBTX4938_INTB_PCIC) +#define RBTX4938_INTF_PCIB (1 << RBTX4938_INTB_PCIB) +#define RBTX4938_INTF_PCIA (1 << RBTX4938_INTB_PCIA) +#define RBTX4938_INTF_RTC (1 << RBTX4938_INTB_RTC) +#define RBTX4938_INTF_ATA (1 << RBTX4938_INTB_ATA) +#define RBTX4938_INTF_MODEM (1 << RBTX4938_INTB_MODEM) +#define RBTX4938_INTF_SWINT (1 << RBTX4938_INTB_SWINT) + +#define rbtx4938_fpga_rev_addr ((__u8 __iomem *)RBTX4938_FPGA_REV_ADDR) +#define rbtx4938_led_addr ((__u8 __iomem *)RBTX4938_LED_ADDR) +#define rbtx4938_dipsw_addr ((__u8 __iomem *)RBTX4938_DIPSW_ADDR) +#define rbtx4938_bdipsw_addr ((__u8 __iomem *)RBTX4938_BDIPSW_ADDR) +#define rbtx4938_imask_addr ((__u8 __iomem *)RBTX4938_IMASK_ADDR) +#define rbtx4938_imask2_addr ((__u8 __iomem *)RBTX4938_IMASK2_ADDR) +#define rbtx4938_intpol_addr ((__u8 __iomem *)RBTX4938_INTPOL_ADDR) +#define rbtx4938_istat_addr ((__u8 __iomem *)RBTX4938_ISTAT_ADDR) +#define rbtx4938_istat2_addr ((__u8 __iomem *)RBTX4938_ISTAT2_ADDR) +#define rbtx4938_imstat_addr ((__u8 __iomem *)RBTX4938_IMSTAT_ADDR) +#define rbtx4938_imstat2_addr ((__u8 __iomem *)RBTX4938_IMSTAT2_ADDR) +#define rbtx4938_softint_addr ((__u8 __iomem *)RBTX4938_SOFTINT_ADDR) +#define rbtx4938_piosel_addr ((__u8 __iomem *)RBTX4938_PIOSEL_ADDR) +#define rbtx4938_spics_addr ((__u8 __iomem *)RBTX4938_SPICS_ADDR) +#define rbtx4938_sfpwr_addr ((__u8 __iomem *)RBTX4938_SFPWR_ADDR) +#define rbtx4938_sfvol_addr ((__u8 __iomem *)RBTX4938_SFVOL_ADDR) +#define rbtx4938_softreset_addr ((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR) +#define rbtx4938_softresetlock_addr \ + ((__u8 __iomem *)RBTX4938_SOFTRESETLOCK_ADDR) +#define rbtx4938_pcireset_addr ((__u8 __iomem *)RBTX4938_PCIRESET_ADDR) + +/* + * IRQ mappings + */ + +#define RBTX4938_SOFT_INT0 0 /* not used */ +#define RBTX4938_SOFT_INT1 1 /* not used */ +#define RBTX4938_IRC_INT 2 +#define RBTX4938_TIMER_INT 7 + +/* These are the virtual IRQ numbers, we divide all IRQ's into + * 'spaces', the 'space' determines where and how to enable/disable + * that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new + * IRQ hardware is supported. + */ +#define RBTX4938_NR_IRQ_IOC 8 + +#define RBTX4938_IRQ_IRC TXX9_IRQ_BASE +#define RBTX4938_IRQ_IOC (TXX9_IRQ_BASE + TX4938_NUM_IR) +#define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC) + +#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR) +#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR) +#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n)) +#define RBTX4938_IRQ_IRC_SIO(n) (RBTX4938_IRQ_IRC + TX4938_IR_SIO(n)) +#define RBTX4938_IRQ_IRC_DMA(ch, n) (RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch, n)) +#define RBTX4938_IRQ_IRC_PIO (RBTX4938_IRQ_IRC + TX4938_IR_PIO) +#define RBTX4938_IRQ_IRC_PDMAC (RBTX4938_IRQ_IRC + TX4938_IR_PDMAC) +#define RBTX4938_IRQ_IRC_PCIC (RBTX4938_IRQ_IRC + TX4938_IR_PCIC) +#define RBTX4938_IRQ_IRC_TMR(n) (RBTX4938_IRQ_IRC + TX4938_IR_TMR(n)) +#define RBTX4938_IRQ_IRC_NDFMC (RBTX4938_IRQ_IRC + TX4938_IR_NDFMC) +#define RBTX4938_IRQ_IRC_PCIERR (RBTX4938_IRQ_IRC + TX4938_IR_PCIERR) +#define RBTX4938_IRQ_IRC_PCIPME (RBTX4938_IRQ_IRC + TX4938_IR_PCIPME) +#define RBTX4938_IRQ_IRC_ACLC (RBTX4938_IRQ_IRC + TX4938_IR_ACLC) +#define RBTX4938_IRQ_IRC_ACLCPME (RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME) +#define RBTX4938_IRQ_IRC_PCIC1 (RBTX4938_IRQ_IRC + TX4938_IR_PCIC1) +#define RBTX4938_IRQ_IRC_SPI (RBTX4938_IRQ_IRC + TX4938_IR_SPI) +#define RBTX4938_IRQ_IOC_PCID (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCID) +#define RBTX4938_IRQ_IOC_PCIC (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIC) +#define RBTX4938_IRQ_IOC_PCIB (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIB) +#define RBTX4938_IRQ_IOC_PCIA (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIA) +#define RBTX4938_IRQ_IOC_RTC (RBTX4938_IRQ_IOC + RBTX4938_INTB_RTC) +#define RBTX4938_IRQ_IOC_ATA (RBTX4938_IRQ_IOC + RBTX4938_INTB_ATA) +#define RBTX4938_IRQ_IOC_MODEM (RBTX4938_IRQ_IOC + RBTX4938_INTB_MODEM) +#define RBTX4938_IRQ_IOC_SWINT (RBTX4938_IRQ_IOC + RBTX4938_INTB_SWINT) + + +/* IOC (PCI, etc) */ +#define RBTX4938_IRQ_IOCINT (TXX9_IRQ_BASE + TX4938_IR_INT(0)) +/* Onboard 10M Ether */ +#define RBTX4938_IRQ_ETHER (TXX9_IRQ_BASE + TX4938_IR_INT(1)) + +#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base) +#define RBTX4938_RTL_8019_IRQ (RBTX4938_IRQ_ETHER) + +void rbtx4938_prom_init(void); +void rbtx4938_irq_setup(void); +struct pci_dev; +int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + +#endif /* __ASM_TXX9_RBTX4938_H */ diff --git a/arch/mips/include/asm/txx9/rbtx4939.h b/arch/mips/include/asm/txx9/rbtx4939.h new file mode 100644 index 000000000000..1acf428c0b4f --- /dev/null +++ b/arch/mips/include/asm/txx9/rbtx4939.h @@ -0,0 +1,133 @@ +/* + * Definitions for RBTX4939 + * + * (C) Copyright TOSHIBA CORPORATION 2005-2006 + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_TXX9_RBTX4939_H +#define __ASM_TXX9_RBTX4939_H + +#include +#include +#include +#include + +/* Address map */ +#define RBTX4939_IOC_REG_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000) +#define RBTX4939_BOARD_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000) +#define RBTX4939_IOC_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000002) +#define RBTX4939_CONFIG1_ADDR (IO_BASE + TXX9_CE(1) + 0x00000004) +#define RBTX4939_CONFIG2_ADDR (IO_BASE + TXX9_CE(1) + 0x00000006) +#define RBTX4939_CONFIG3_ADDR (IO_BASE + TXX9_CE(1) + 0x00000008) +#define RBTX4939_CONFIG4_ADDR (IO_BASE + TXX9_CE(1) + 0x0000000a) +#define RBTX4939_USTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00001000) +#define RBTX4939_UDIPSW_ADDR (IO_BASE + TXX9_CE(1) + 0x00001002) +#define RBTX4939_BDIPSW_ADDR (IO_BASE + TXX9_CE(1) + 0x00001004) +#define RBTX4939_IEN_ADDR (IO_BASE + TXX9_CE(1) + 0x00002000) +#define RBTX4939_IPOL_ADDR (IO_BASE + TXX9_CE(1) + 0x00002002) +#define RBTX4939_IFAC1_ADDR (IO_BASE + TXX9_CE(1) + 0x00002004) +#define RBTX4939_IFAC2_ADDR (IO_BASE + TXX9_CE(1) + 0x00002006) +#define RBTX4939_SOFTINT_ADDR (IO_BASE + TXX9_CE(1) + 0x00003000) +#define RBTX4939_ISASTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00004000) +#define RBTX4939_PCISTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00004002) +#define RBTX4939_ROME_ADDR (IO_BASE + TXX9_CE(1) + 0x00004004) +#define RBTX4939_SPICS_ADDR (IO_BASE + TXX9_CE(1) + 0x00004006) +#define RBTX4939_AUDI_ADDR (IO_BASE + TXX9_CE(1) + 0x00004008) +#define RBTX4939_ISAGPIO_ADDR (IO_BASE + TXX9_CE(1) + 0x0000400a) +#define RBTX4939_PE1_ADDR (IO_BASE + TXX9_CE(1) + 0x00005000) +#define RBTX4939_PE2_ADDR (IO_BASE + TXX9_CE(1) + 0x00005002) +#define RBTX4939_PE3_ADDR (IO_BASE + TXX9_CE(1) + 0x00005004) +#define RBTX4939_VP_ADDR (IO_BASE + TXX9_CE(1) + 0x00005006) +#define RBTX4939_VPRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00005008) +#define RBTX4939_VPSOUT_ADDR (IO_BASE + TXX9_CE(1) + 0x0000500a) +#define RBTX4939_VPSIN_ADDR (IO_BASE + TXX9_CE(1) + 0x0000500c) +#define RBTX4939_7SEG_ADDR(s, ch) \ + (IO_BASE + TXX9_CE(1) + 0x00006000 + (s) * 16 + ((ch) & 3) * 2) +#define RBTX4939_SOFTRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00007000) +#define RBTX4939_RESETEN_ADDR (IO_BASE + TXX9_CE(1) + 0x00007002) +#define RBTX4939_RESETSTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00007004) +#define RBTX4939_ETHER_BASE (IO_BASE + TXX9_CE(1) + 0x00020000) + +/* Ethernet port address */ +#define RBTX4939_ETHER_ADDR (RBTX4939_ETHER_BASE + 0x300) + +/* bits for IEN/IPOL/IFAC */ +#define RBTX4938_INTB_ISA0 0 +#define RBTX4938_INTB_ISA11 1 +#define RBTX4938_INTB_ISA12 2 +#define RBTX4938_INTB_ISA15 3 +#define RBTX4938_INTB_I2S 4 +#define RBTX4938_INTB_SW 5 +#define RBTX4938_INTF_ISA0 (1 << RBTX4938_INTB_ISA0) +#define RBTX4938_INTF_ISA11 (1 << RBTX4938_INTB_ISA11) +#define RBTX4938_INTF_ISA12 (1 << RBTX4938_INTB_ISA12) +#define RBTX4938_INTF_ISA15 (1 << RBTX4938_INTB_ISA15) +#define RBTX4938_INTF_I2S (1 << RBTX4938_INTB_I2S) +#define RBTX4938_INTF_SW (1 << RBTX4938_INTB_SW) + +/* bits for PE1,PE2,PE3 */ +#define RBTX4939_PE1_ATA(ch) (0x01 << (ch)) +#define RBTX4939_PE1_RMII(ch) (0x04 << (ch)) +#define RBTX4939_PE2_SIO0 0x01 +#define RBTX4939_PE2_SIO2 0x02 +#define RBTX4939_PE2_SIO3 0x04 +#define RBTX4939_PE2_CIR 0x08 +#define RBTX4939_PE2_SPI 0x10 +#define RBTX4939_PE2_GPIO 0x20 +#define RBTX4939_PE3_VP 0x01 +#define RBTX4939_PE3_VP_P 0x02 +#define RBTX4939_PE3_VP_S 0x04 + +#define rbtx4939_board_rev_addr ((u8 __iomem *)RBTX4939_BOARD_REV_ADDR) +#define rbtx4939_ioc_rev_addr ((u8 __iomem *)RBTX4939_IOC_REV_ADDR) +#define rbtx4939_config1_addr ((u8 __iomem *)RBTX4939_CONFIG1_ADDR) +#define rbtx4939_config2_addr ((u8 __iomem *)RBTX4939_CONFIG2_ADDR) +#define rbtx4939_config3_addr ((u8 __iomem *)RBTX4939_CONFIG3_ADDR) +#define rbtx4939_config4_addr ((u8 __iomem *)RBTX4939_CONFIG4_ADDR) +#define rbtx4939_ustat_addr ((u8 __iomem *)RBTX4939_USTAT_ADDR) +#define rbtx4939_udipsw_addr ((u8 __iomem *)RBTX4939_UDIPSW_ADDR) +#define rbtx4939_bdipsw_addr ((u8 __iomem *)RBTX4939_BDIPSW_ADDR) +#define rbtx4939_ien_addr ((u8 __iomem *)RBTX4939_IEN_ADDR) +#define rbtx4939_ipol_addr ((u8 __iomem *)RBTX4939_IPOL_ADDR) +#define rbtx4939_ifac1_addr ((u8 __iomem *)RBTX4939_IFAC1_ADDR) +#define rbtx4939_ifac2_addr ((u8 __iomem *)RBTX4939_IFAC2_ADDR) +#define rbtx4939_softint_addr ((u8 __iomem *)RBTX4939_SOFTINT_ADDR) +#define rbtx4939_isastat_addr ((u8 __iomem *)RBTX4939_ISASTAT_ADDR) +#define rbtx4939_pcistat_addr ((u8 __iomem *)RBTX4939_PCISTAT_ADDR) +#define rbtx4939_rome_addr ((u8 __iomem *)RBTX4939_ROME_ADDR) +#define rbtx4939_spics_addr ((u8 __iomem *)RBTX4939_SPICS_ADDR) +#define rbtx4939_audi_addr ((u8 __iomem *)RBTX4939_AUDI_ADDR) +#define rbtx4939_isagpio_addr ((u8 __iomem *)RBTX4939_ISAGPIO_ADDR) +#define rbtx4939_pe1_addr ((u8 __iomem *)RBTX4939_PE1_ADDR) +#define rbtx4939_pe2_addr ((u8 __iomem *)RBTX4939_PE2_ADDR) +#define rbtx4939_pe3_addr ((u8 __iomem *)RBTX4939_PE3_ADDR) +#define rbtx4939_vp_addr ((u8 __iomem *)RBTX4939_VP_ADDR) +#define rbtx4939_vpreset_addr ((u8 __iomem *)RBTX4939_VPRESET_ADDR) +#define rbtx4939_vpsout_addr ((u8 __iomem *)RBTX4939_VPSOUT_ADDR) +#define rbtx4939_vpsin_addr ((u8 __iomem *)RBTX4939_VPSIN_ADDR) +#define rbtx4939_7seg_addr(s, ch) \ + ((u8 __iomem *)RBTX4939_7SEG_ADDR(s, ch)) +#define rbtx4939_softreset_addr ((u8 __iomem *)RBTX4939_SOFTRESET_ADDR) +#define rbtx4939_reseten_addr ((u8 __iomem *)RBTX4939_RESETEN_ADDR) +#define rbtx4939_resetstat_addr ((u8 __iomem *)RBTX4939_RESETSTAT_ADDR) + +/* + * IRQ mappings + */ +#define RBTX4939_NR_IRQ_IOC 8 + +#define RBTX4939_IRQ_IOC (TXX9_IRQ_BASE + TX4939_NUM_IR) +#define RBTX4939_IRQ_END (RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC) + +/* IOC (ISA, etc) */ +#define RBTX4939_IRQ_IOCINT (TXX9_IRQ_BASE + TX4939_IR_INT(0)) +/* Onboard 10M Ether */ +#define RBTX4939_IRQ_ETHER (TXX9_IRQ_BASE + TX4939_IR_INT(1)) + +void rbtx4939_prom_init(void); +void rbtx4939_irq_setup(void); + +#endif /* __ASM_TXX9_RBTX4939_H */ diff --git a/arch/mips/include/asm/txx9/smsc_fdc37m81x.h b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h new file mode 100644 index 000000000000..d1d6332b4ca6 --- /dev/null +++ b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h @@ -0,0 +1,68 @@ +/* + * Interface for smsc fdc48m81x Super IO chip + * + * Author: MontaVista Software, Inc. source@mvista.com + * + * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright (C) 2004 MontaVista Software Inc. + * Manish Lachwani, mlachwani@mvista.com + */ + +#ifndef _SMSC_FDC37M81X_H_ +#define _SMSC_FDC37M81X_H_ + +/* Common Registers */ +#define SMSC_FDC37M81X_CONFIG_INDEX 0x00 +#define SMSC_FDC37M81X_CONFIG_DATA 0x01 +#define SMSC_FDC37M81X_CONF 0x02 +#define SMSC_FDC37M81X_INDEX 0x03 +#define SMSC_FDC37M81X_DNUM 0x07 +#define SMSC_FDC37M81X_DID 0x20 +#define SMSC_FDC37M81X_DREV 0x21 +#define SMSC_FDC37M81X_PCNT 0x22 +#define SMSC_FDC37M81X_PMGT 0x23 +#define SMSC_FDC37M81X_OSC 0x24 +#define SMSC_FDC37M81X_CONFPA0 0x26 +#define SMSC_FDC37M81X_CONFPA1 0x27 +#define SMSC_FDC37M81X_TEST4 0x2B +#define SMSC_FDC37M81X_TEST5 0x2C +#define SMSC_FDC37M81X_TEST1 0x2D +#define SMSC_FDC37M81X_TEST2 0x2E +#define SMSC_FDC37M81X_TEST3 0x2F + +/* Logical device numbers */ +#define SMSC_FDC37M81X_FDD 0x00 +#define SMSC_FDC37M81X_PARALLEL 0x03 +#define SMSC_FDC37M81X_SERIAL1 0x04 +#define SMSC_FDC37M81X_SERIAL2 0x05 +#define SMSC_FDC37M81X_KBD 0x07 +#define SMSC_FDC37M81X_AUXIO 0x08 +#define SMSC_FDC37M81X_NONE 0xff + +/* Logical device Config Registers */ +#define SMSC_FDC37M81X_ACTIVE 0x30 +#define SMSC_FDC37M81X_BASEADDR0 0x60 +#define SMSC_FDC37M81X_BASEADDR1 0x61 +#define SMSC_FDC37M81X_INT 0x70 +#define SMSC_FDC37M81X_INT2 0x72 +#define SMSC_FDC37M81X_LDCR_F0 0xF0 + +/* Chip Config Values */ +#define SMSC_FDC37M81X_CONFIG_ENTER 0x55 +#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa +#define SMSC_FDC37M81X_CHIP_ID 0x4d + +unsigned long smsc_fdc37m81x_init(unsigned long port); + +void smsc_fdc37m81x_config_beg(void); + +void smsc_fdc37m81x_config_end(void); + +u8 smsc_fdc37m81x_config_get(u8 reg); +void smsc_fdc37m81x_config_set(u8 reg, u8 val); + +#endif diff --git a/arch/mips/include/asm/txx9/spi.h b/arch/mips/include/asm/txx9/spi.h new file mode 100644 index 000000000000..0d727f354557 --- /dev/null +++ b/arch/mips/include/asm/txx9/spi.h @@ -0,0 +1,34 @@ +/* + * Definitions for TX4937/TX4938 SPI + * + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#ifndef __ASM_TXX9_SPI_H +#define __ASM_TXX9_SPI_H + +#include + +#ifdef CONFIG_SPI +int spi_eeprom_register(int busid, int chipid, int size); +int spi_eeprom_read(int busid, int chipid, + int address, unsigned char *buf, int len); +#else +static inline int spi_eeprom_register(int busid, int chipid, int size) +{ + return -ENODEV; +} +static inline int spi_eeprom_read(int busid, int chipid, + int address, unsigned char *buf, int len) +{ + return -ENODEV; +} +#endif + +#endif /* __ASM_TXX9_SPI_H */ diff --git a/arch/mips/include/asm/txx9/tx3927.h b/arch/mips/include/asm/txx9/tx3927.h new file mode 100644 index 000000000000..dc30c8d42061 --- /dev/null +++ b/arch/mips/include/asm/txx9/tx3927.h @@ -0,0 +1,341 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Toshiba Corporation + */ +#ifndef __ASM_TXX9_TX3927_H +#define __ASM_TXX9_TX3927_H + +#define TX3927_REG_BASE 0xfffe0000UL +#define TX3927_REG_SIZE 0x00010000 +#define TX3927_SDRAMC_REG (TX3927_REG_BASE + 0x8000) +#define TX3927_ROMC_REG (TX3927_REG_BASE + 0x9000) +#define TX3927_DMA_REG (TX3927_REG_BASE + 0xb000) +#define TX3927_IRC_REG (TX3927_REG_BASE + 0xc000) +#define TX3927_PCIC_REG (TX3927_REG_BASE + 0xd000) +#define TX3927_CCFG_REG (TX3927_REG_BASE + 0xe000) +#define TX3927_NR_TMR 3 +#define TX3927_TMR_REG(ch) (TX3927_REG_BASE + 0xf000 + (ch) * 0x100) +#define TX3927_NR_SIO 2 +#define TX3927_SIO_REG(ch) (TX3927_REG_BASE + 0xf300 + (ch) * 0x100) +#define TX3927_PIO_REG (TX3927_REG_BASE + 0xf500) + +struct tx3927_sdramc_reg { + volatile unsigned long cr[8]; + volatile unsigned long tr[3]; + volatile unsigned long cmd; + volatile unsigned long smrs[2]; +}; + +struct tx3927_romc_reg { + volatile unsigned long cr[8]; +}; + +struct tx3927_dma_reg { + struct tx3927_dma_ch_reg { + volatile unsigned long cha; + volatile unsigned long sar; + volatile unsigned long dar; + volatile unsigned long cntr; + volatile unsigned long sair; + volatile unsigned long dair; + volatile unsigned long ccr; + volatile unsigned long csr; + } ch[4]; + volatile unsigned long dbr[8]; + volatile unsigned long tdhr; + volatile unsigned long mcr; + volatile unsigned long unused0; +}; + +#include + +#ifdef __BIG_ENDIAN +#define endian_def_s2(e1, e2) \ + volatile unsigned short e1, e2 +#define endian_def_sb2(e1, e2, e3) \ + volatile unsigned short e1;volatile unsigned char e2, e3 +#define endian_def_b2s(e1, e2, e3) \ + volatile unsigned char e1, e2;volatile unsigned short e3 +#define endian_def_b4(e1, e2, e3, e4) \ + volatile unsigned char e1, e2, e3, e4 +#else +#define endian_def_s2(e1, e2) \ + volatile unsigned short e2, e1 +#define endian_def_sb2(e1, e2, e3) \ + volatile unsigned char e3, e2;volatile unsigned short e1 +#define endian_def_b2s(e1, e2, e3) \ + volatile unsigned short e3;volatile unsigned char e2, e1 +#define endian_def_b4(e1, e2, e3, e4) \ + volatile unsigned char e4, e3, e2, e1 +#endif + +struct tx3927_pcic_reg { + endian_def_s2(did, vid); + endian_def_s2(pcistat, pcicmd); + endian_def_b4(cc, scc, rpli, rid); + endian_def_b4(unused0, ht, mlt, cls); + volatile unsigned long ioba; /* +10 */ + volatile unsigned long mba; + volatile unsigned long unused1[5]; + endian_def_s2(svid, ssvid); + volatile unsigned long unused2; /* +30 */ + endian_def_sb2(unused3, unused4, capptr); + volatile unsigned long unused5; + endian_def_b4(ml, mg, ip, il); + volatile unsigned long unused6; /* +40 */ + volatile unsigned long istat; + volatile unsigned long iim; + volatile unsigned long rrt; + volatile unsigned long unused7[3]; /* +50 */ + volatile unsigned long ipbmma; + volatile unsigned long ipbioma; /* +60 */ + volatile unsigned long ilbmma; + volatile unsigned long ilbioma; + volatile unsigned long unused8[9]; + volatile unsigned long tc; /* +90 */ + volatile unsigned long tstat; + volatile unsigned long tim; + volatile unsigned long tccmd; + volatile unsigned long pcirrt; /* +a0 */ + volatile unsigned long pcirrt_cmd; + volatile unsigned long pcirrdt; + volatile unsigned long unused9[3]; + volatile unsigned long tlboap; + volatile unsigned long tlbiap; + volatile unsigned long tlbmma; /* +c0 */ + volatile unsigned long tlbioma; + volatile unsigned long sc_msg; + volatile unsigned long sc_be; + volatile unsigned long tbl; /* +d0 */ + volatile unsigned long unused10[3]; + volatile unsigned long pwmng; /* +e0 */ + volatile unsigned long pwmngs; + volatile unsigned long unused11[6]; + volatile unsigned long req_trace; /* +100 */ + volatile unsigned long pbapmc; + volatile unsigned long pbapms; + volatile unsigned long pbapmim; + volatile unsigned long bm; /* +110 */ + volatile unsigned long cpcibrs; + volatile unsigned long cpcibgs; + volatile unsigned long pbacs; + volatile unsigned long iobas; /* +120 */ + volatile unsigned long mbas; + volatile unsigned long lbc; + volatile unsigned long lbstat; + volatile unsigned long lbim; /* +130 */ + volatile unsigned long pcistatim; + volatile unsigned long ica; + volatile unsigned long icd; + volatile unsigned long iiadp; /* +140 */ + volatile unsigned long iscdp; + volatile unsigned long mmas; + volatile unsigned long iomas; + volatile unsigned long ipciaddr; /* +150 */ + volatile unsigned long ipcidata; + volatile unsigned long ipcibe; +}; + +struct tx3927_ccfg_reg { + volatile unsigned long ccfg; + volatile unsigned long crir; + volatile unsigned long pcfg; + volatile unsigned long tear; + volatile unsigned long pdcr; +}; + +/* + * SDRAMC + */ + +/* + * ROMC + */ + +/* + * DMA + */ +/* bits for MCR */ +#define TX3927_DMA_MCR_EIS(ch) (0x10000000<<(ch)) +#define TX3927_DMA_MCR_DIS(ch) (0x01000000<<(ch)) +#define TX3927_DMA_MCR_RSFIF 0x00000080 +#define TX3927_DMA_MCR_FIFUM(ch) (0x00000008<<(ch)) +#define TX3927_DMA_MCR_LE 0x00000004 +#define TX3927_DMA_MCR_RPRT 0x00000002 +#define TX3927_DMA_MCR_MSTEN 0x00000001 + +/* bits for CCRn */ +#define TX3927_DMA_CCR_DBINH 0x04000000 +#define TX3927_DMA_CCR_SBINH 0x02000000 +#define TX3927_DMA_CCR_CHRST 0x01000000 +#define TX3927_DMA_CCR_RVBYTE 0x00800000 +#define TX3927_DMA_CCR_ACKPOL 0x00400000 +#define TX3927_DMA_CCR_REQPL 0x00200000 +#define TX3927_DMA_CCR_EGREQ 0x00100000 +#define TX3927_DMA_CCR_CHDN 0x00080000 +#define TX3927_DMA_CCR_DNCTL 0x00060000 +#define TX3927_DMA_CCR_EXTRQ 0x00010000 +#define TX3927_DMA_CCR_INTRQD 0x0000e000 +#define TX3927_DMA_CCR_INTENE 0x00001000 +#define TX3927_DMA_CCR_INTENC 0x00000800 +#define TX3927_DMA_CCR_INTENT 0x00000400 +#define TX3927_DMA_CCR_CHNEN 0x00000200 +#define TX3927_DMA_CCR_XFACT 0x00000100 +#define TX3927_DMA_CCR_SNOP 0x00000080 +#define TX3927_DMA_CCR_DSTINC 0x00000040 +#define TX3927_DMA_CCR_SRCINC 0x00000020 +#define TX3927_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c) +#define TX3927_DMA_CCR_XFSZ_1W TX3927_DMA_CCR_XFSZ(2) +#define TX3927_DMA_CCR_XFSZ_4W TX3927_DMA_CCR_XFSZ(4) +#define TX3927_DMA_CCR_XFSZ_8W TX3927_DMA_CCR_XFSZ(5) +#define TX3927_DMA_CCR_XFSZ_16W TX3927_DMA_CCR_XFSZ(6) +#define TX3927_DMA_CCR_XFSZ_32W TX3927_DMA_CCR_XFSZ(7) +#define TX3927_DMA_CCR_MEMIO 0x00000002 +#define TX3927_DMA_CCR_ONEAD 0x00000001 + +/* bits for CSRn */ +#define TX3927_DMA_CSR_CHNACT 0x00000100 +#define TX3927_DMA_CSR_ABCHC 0x00000080 +#define TX3927_DMA_CSR_NCHNC 0x00000040 +#define TX3927_DMA_CSR_NTRNFC 0x00000020 +#define TX3927_DMA_CSR_EXTDN 0x00000010 +#define TX3927_DMA_CSR_CFERR 0x00000008 +#define TX3927_DMA_CSR_CHERR 0x00000004 +#define TX3927_DMA_CSR_DESERR 0x00000002 +#define TX3927_DMA_CSR_SORERR 0x00000001 + +/* + * IRC + */ +#define TX3927_IR_INT0 0 +#define TX3927_IR_INT1 1 +#define TX3927_IR_INT2 2 +#define TX3927_IR_INT3 3 +#define TX3927_IR_INT4 4 +#define TX3927_IR_INT5 5 +#define TX3927_IR_SIO0 6 +#define TX3927_IR_SIO1 7 +#define TX3927_IR_SIO(ch) (6 + (ch)) +#define TX3927_IR_DMA 8 +#define TX3927_IR_PIO 9 +#define TX3927_IR_PCI 10 +#define TX3927_IR_TMR(ch) (13 + (ch)) +#define TX3927_NUM_IR 16 + +/* + * PCIC + */ +/* bits for PCICMD */ +/* see PCI_COMMAND_XXX in linux/pci.h */ + +/* bits for PCISTAT */ +/* see PCI_STATUS_XXX in linux/pci.h */ +#define PCI_STATUS_NEW_CAP 0x0010 + +/* bits for ISTAT/IIM */ +#define TX3927_PCIC_IIM_ALL 0x00001600 + +/* bits for TC */ +#define TX3927_PCIC_TC_OF16E 0x00000020 +#define TX3927_PCIC_TC_IF8E 0x00000010 +#define TX3927_PCIC_TC_OF8E 0x00000008 + +/* bits for TSTAT/TIM */ +#define TX3927_PCIC_TIM_ALL 0x0003ffff + +/* bits for IOBA/MBA */ +/* see PCI_BASE_ADDRESS_XXX in linux/pci.h */ + +/* bits for PBAPMC */ +#define TX3927_PCIC_PBAPMC_RPBA 0x00000004 +#define TX3927_PCIC_PBAPMC_PBAEN 0x00000002 +#define TX3927_PCIC_PBAPMC_BMCEN 0x00000001 + +/* bits for LBSTAT/LBIM */ +#define TX3927_PCIC_LBIM_ALL 0x0000003e + +/* bits for PCISTATIM (see also PCI_STATUS_XXX in linux/pci.h */ +#define TX3927_PCIC_PCISTATIM_ALL 0x0000f900 + +/* bits for LBC */ +#define TX3927_PCIC_LBC_IBSE 0x00004000 +#define TX3927_PCIC_LBC_TIBSE 0x00002000 +#define TX3927_PCIC_LBC_TMFBSE 0x00001000 +#define TX3927_PCIC_LBC_HRST 0x00000800 +#define TX3927_PCIC_LBC_SRST 0x00000400 +#define TX3927_PCIC_LBC_EPCAD 0x00000200 +#define TX3927_PCIC_LBC_MSDSE 0x00000100 +#define TX3927_PCIC_LBC_CRR 0x00000080 +#define TX3927_PCIC_LBC_ILMDE 0x00000040 +#define TX3927_PCIC_LBC_ILIDE 0x00000020 + +#define TX3927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) +#define TX3927_PCIC_MAX_DEVNU TX3927_PCIC_IDSEL_AD_TO_SLOT(32) + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX3927_CCFG_TLBOFF 0x00020000 +#define TX3927_CCFG_BEOW 0x00010000 +#define TX3927_CCFG_WR 0x00008000 +#define TX3927_CCFG_TOE 0x00004000 +#define TX3927_CCFG_PCIXARB 0x00002000 +#define TX3927_CCFG_PCI3 0x00001000 +#define TX3927_CCFG_PSNP 0x00000800 +#define TX3927_CCFG_PPRI 0x00000400 +#define TX3927_CCFG_PLLM 0x00000030 +#define TX3927_CCFG_ENDIAN 0x00000004 +#define TX3927_CCFG_HALT 0x00000002 +#define TX3927_CCFG_ACEHOLD 0x00000001 + +/* PCFG : Pin Configuration */ +#define TX3927_PCFG_SYSCLKEN 0x08000000 +#define TX3927_PCFG_SDRCLKEN_ALL 0x07c00000 +#define TX3927_PCFG_SDRCLKEN(ch) (0x00400000<<(ch)) +#define TX3927_PCFG_PCICLKEN_ALL 0x003c0000 +#define TX3927_PCFG_PCICLKEN(ch) (0x00040000<<(ch)) +#define TX3927_PCFG_SELALL 0x0003ffff +#define TX3927_PCFG_SELCS 0x00020000 +#define TX3927_PCFG_SELDSF 0x00010000 +#define TX3927_PCFG_SELSIOC_ALL 0x0000c000 +#define TX3927_PCFG_SELSIOC(ch) (0x00004000<<(ch)) +#define TX3927_PCFG_SELSIO_ALL 0x00003000 +#define TX3927_PCFG_SELSIO(ch) (0x00001000<<(ch)) +#define TX3927_PCFG_SELTMR_ALL 0x00000e00 +#define TX3927_PCFG_SELTMR(ch) (0x00000200<<(ch)) +#define TX3927_PCFG_SELDONE 0x00000100 +#define TX3927_PCFG_INTDMA_ALL 0x000000f0 +#define TX3927_PCFG_INTDMA(ch) (0x00000010<<(ch)) +#define TX3927_PCFG_SELDMA_ALL 0x0000000f +#define TX3927_PCFG_SELDMA(ch) (0x00000001<<(ch)) + +#define tx3927_sdramcptr ((struct tx3927_sdramc_reg *)TX3927_SDRAMC_REG) +#define tx3927_romcptr ((struct tx3927_romc_reg *)TX3927_ROMC_REG) +#define tx3927_dmaptr ((struct tx3927_dma_reg *)TX3927_DMA_REG) +#define tx3927_pcicptr ((struct tx3927_pcic_reg *)TX3927_PCIC_REG) +#define tx3927_ccfgptr ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG) +#define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch)) +#define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG) + +#define TX3927_REV_PCODE() (tx3927_ccfgptr->crir >> 16) +#define TX3927_ROMC_BA(ch) (tx3927_romcptr->cr[(ch)] & 0xfff00000) +#define TX3927_ROMC_SIZE(ch) \ + (0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf)) +#define TX3927_ROMC_WIDTH(ch) (32 >> ((tx3927_romcptr->cr[(ch)] >> 7) & 0x1)) + +void tx3927_wdt_init(void); +void tx3927_setup(void); +void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr); +void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask); +struct pci_controller; +void tx3927_pcic_setup(struct pci_controller *channel, + unsigned long sdram_size, int extarb); +void tx3927_setup_pcierr_irq(void); +void tx3927_irq_init(void); +void tx3927_mtd_init(int ch); + +#endif /* __ASM_TXX9_TX3927_H */ diff --git a/arch/mips/include/asm/txx9/tx4927.h b/arch/mips/include/asm/txx9/tx4927.h new file mode 100644 index 000000000000..7d813f1cb98d --- /dev/null +++ b/arch/mips/include/asm/txx9/tx4927.h @@ -0,0 +1,269 @@ +/* + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2006 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_TXX9_TX4927_H +#define __ASM_TXX9_TX4927_H + +#include +#include +#include +#include + +#ifdef CONFIG_64BIT +#define TX4927_REG_BASE 0xffffffffff1f0000UL +#else +#define TX4927_REG_BASE 0xff1f0000UL +#endif +#define TX4927_REG_SIZE 0x00010000 + +#define TX4927_SDRAMC_REG (TX4927_REG_BASE + 0x8000) +#define TX4927_EBUSC_REG (TX4927_REG_BASE + 0x9000) +#define TX4927_PCIC_REG (TX4927_REG_BASE + 0xd000) +#define TX4927_CCFG_REG (TX4927_REG_BASE + 0xe000) +#define TX4927_IRC_REG (TX4927_REG_BASE + 0xf600) +#define TX4927_NR_TMR 3 +#define TX4927_TMR_REG(ch) (TX4927_REG_BASE + 0xf000 + (ch) * 0x100) +#define TX4927_NR_SIO 2 +#define TX4927_SIO_REG(ch) (TX4927_REG_BASE + 0xf300 + (ch) * 0x100) +#define TX4927_PIO_REG (TX4927_REG_BASE + 0xf500) + +#define TX4927_IR_ECCERR 0 +#define TX4927_IR_WTOERR 1 +#define TX4927_NUM_IR_INT 6 +#define TX4927_IR_INT(n) (2 + (n)) +#define TX4927_NUM_IR_SIO 2 +#define TX4927_IR_SIO(n) (8 + (n)) +#define TX4927_NUM_IR_DMA 4 +#define TX4927_IR_DMA(n) (10 + (n)) +#define TX4927_IR_PIO 14 +#define TX4927_IR_PDMAC 15 +#define TX4927_IR_PCIC 16 +#define TX4927_NUM_IR_TMR 3 +#define TX4927_IR_TMR(n) (17 + (n)) +#define TX4927_IR_PCIERR 22 +#define TX4927_IR_PCIPME 23 +#define TX4927_IR_ACLC 24 +#define TX4927_IR_ACLCPME 25 +#define TX4927_NUM_IR 32 + +#define TX4927_IRC_INT 2 /* IP[2] in Status register */ + +#define TX4927_NUM_PIO 16 + +struct tx4927_sdramc_reg { + u64 cr[4]; + u64 unused0[4]; + u64 tr; + u64 unused1[2]; + u64 cmd; +}; + +struct tx4927_ebusc_reg { + u64 cr[8]; +}; + +struct tx4927_ccfg_reg { + u64 ccfg; + u64 crir; + u64 pcfg; + u64 toea; + u64 clkctr; + u64 unused0; + u64 garbc; + u64 unused1; + u64 unused2; + u64 ramp; +}; + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX4927_CCFG_WDRST 0x0000020000000000ULL +#define TX4927_CCFG_WDREXEN 0x0000010000000000ULL +#define TX4927_CCFG_BCFG_MASK 0x000000ff00000000ULL +#define TX4927_CCFG_TINTDIS 0x01000000 +#define TX4927_CCFG_PCI66 0x00800000 +#define TX4927_CCFG_PCIMODE 0x00400000 +#define TX4927_CCFG_DIVMODE_MASK 0x000e0000 +#define TX4927_CCFG_DIVMODE_8 (0x0 << 17) +#define TX4927_CCFG_DIVMODE_12 (0x1 << 17) +#define TX4927_CCFG_DIVMODE_16 (0x2 << 17) +#define TX4927_CCFG_DIVMODE_10 (0x3 << 17) +#define TX4927_CCFG_DIVMODE_2 (0x4 << 17) +#define TX4927_CCFG_DIVMODE_3 (0x5 << 17) +#define TX4927_CCFG_DIVMODE_4 (0x6 << 17) +#define TX4927_CCFG_DIVMODE_2_5 (0x7 << 17) +#define TX4927_CCFG_BEOW 0x00010000 +#define TX4927_CCFG_WR 0x00008000 +#define TX4927_CCFG_TOE 0x00004000 +#define TX4927_CCFG_PCIARB 0x00002000 +#define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800 +#define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000 +#define TX4927_CCFG_PCIDIVMODE_3 0x00000800 +#define TX4927_CCFG_PCIDIVMODE_5 0x00001000 +#define TX4927_CCFG_PCIDIVMODE_6 0x00001800 +#define TX4927_CCFG_SYSSP_MASK 0x000000c0 +#define TX4927_CCFG_ENDIAN 0x00000004 +#define TX4927_CCFG_HALT 0x00000002 +#define TX4927_CCFG_ACEHOLD 0x00000001 +#define TX4927_CCFG_W1CBITS (TX4927_CCFG_WDRST | TX4927_CCFG_BEOW) + +/* PCFG : Pin Configuration */ +#define TX4927_PCFG_SDCLKDLY_MASK 0x30000000 +#define TX4927_PCFG_SDCLKDLY(d) ((d)<<28) +#define TX4927_PCFG_SYSCLKEN 0x08000000 +#define TX4927_PCFG_SDCLKEN_ALL 0x07800000 +#define TX4927_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) +#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000 +#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) +#define TX4927_PCFG_SEL2 0x00000200 +#define TX4927_PCFG_SEL1 0x00000100 +#define TX4927_PCFG_DMASEL_ALL 0x000000ff +#define TX4927_PCFG_DMASEL0_MASK 0x00000003 +#define TX4927_PCFG_DMASEL1_MASK 0x0000000c +#define TX4927_PCFG_DMASEL2_MASK 0x00000030 +#define TX4927_PCFG_DMASEL3_MASK 0x000000c0 +#define TX4927_PCFG_DMASEL0_DRQ0 0x00000000 +#define TX4927_PCFG_DMASEL0_SIO1 0x00000001 +#define TX4927_PCFG_DMASEL0_ACL0 0x00000002 +#define TX4927_PCFG_DMASEL0_ACL2 0x00000003 +#define TX4927_PCFG_DMASEL1_DRQ1 0x00000000 +#define TX4927_PCFG_DMASEL1_SIO1 0x00000004 +#define TX4927_PCFG_DMASEL1_ACL1 0x00000008 +#define TX4927_PCFG_DMASEL1_ACL3 0x0000000c +#define TX4927_PCFG_DMASEL2_DRQ2 0x00000000 /* SEL2=0 */ +#define TX4927_PCFG_DMASEL2_SIO0 0x00000010 /* SEL2=0 */ +#define TX4927_PCFG_DMASEL2_ACL1 0x00000000 /* SEL2=1 */ +#define TX4927_PCFG_DMASEL2_ACL2 0x00000020 /* SEL2=1 */ +#define TX4927_PCFG_DMASEL2_ACL0 0x00000030 /* SEL2=1 */ +#define TX4927_PCFG_DMASEL3_DRQ3 0x00000000 +#define TX4927_PCFG_DMASEL3_SIO0 0x00000040 +#define TX4927_PCFG_DMASEL3_ACL3 0x00000080 +#define TX4927_PCFG_DMASEL3_ACL1 0x000000c0 + +/* CLKCTR : Clock Control */ +#define TX4927_CLKCTR_ACLCKD 0x02000000 +#define TX4927_CLKCTR_PIOCKD 0x01000000 +#define TX4927_CLKCTR_DMACKD 0x00800000 +#define TX4927_CLKCTR_PCICKD 0x00400000 +#define TX4927_CLKCTR_TM0CKD 0x00100000 +#define TX4927_CLKCTR_TM1CKD 0x00080000 +#define TX4927_CLKCTR_TM2CKD 0x00040000 +#define TX4927_CLKCTR_SIO0CKD 0x00020000 +#define TX4927_CLKCTR_SIO1CKD 0x00010000 +#define TX4927_CLKCTR_ACLRST 0x00000200 +#define TX4927_CLKCTR_PIORST 0x00000100 +#define TX4927_CLKCTR_DMARST 0x00000080 +#define TX4927_CLKCTR_PCIRST 0x00000040 +#define TX4927_CLKCTR_TM0RST 0x00000010 +#define TX4927_CLKCTR_TM1RST 0x00000008 +#define TX4927_CLKCTR_TM2RST 0x00000004 +#define TX4927_CLKCTR_SIO0RST 0x00000002 +#define TX4927_CLKCTR_SIO1RST 0x00000001 + +#define tx4927_sdramcptr \ + ((struct tx4927_sdramc_reg __iomem *)TX4927_SDRAMC_REG) +#define tx4927_pcicptr \ + ((struct tx4927_pcic_reg __iomem *)TX4927_PCIC_REG) +#define tx4927_ccfgptr \ + ((struct tx4927_ccfg_reg __iomem *)TX4927_CCFG_REG) +#define tx4927_ebuscptr \ + ((struct tx4927_ebusc_reg __iomem *)TX4927_EBUSC_REG) +#define tx4927_pioptr ((struct txx9_pio_reg __iomem *)TX4927_PIO_REG) + +#define TX4927_REV_PCODE() \ + ((__u32)__raw_readq(&tx4927_ccfgptr->crir) >> 16) + +#define TX4927_SDRAMC_CR(ch) __raw_readq(&tx4927_sdramcptr->cr[(ch)]) +#define TX4927_SDRAMC_BA(ch) ((TX4927_SDRAMC_CR(ch) >> 49) << 21) +#define TX4927_SDRAMC_SIZE(ch) \ + ((((TX4927_SDRAMC_CR(ch) >> 33) & 0x7fff) + 1) << 21) + +#define TX4927_EBUSC_CR(ch) __raw_readq(&tx4927_ebuscptr->cr[(ch)]) +#define TX4927_EBUSC_BA(ch) ((TX4927_EBUSC_CR(ch) >> 48) << 20) +#define TX4927_EBUSC_SIZE(ch) \ + (0x00100000 << ((unsigned long)(TX4927_EBUSC_CR(ch) >> 8) & 0xf)) +#define TX4927_EBUSC_WIDTH(ch) \ + (64 >> ((__u32)(TX4927_EBUSC_CR(ch) >> 20) & 0x3)) + +/* utilities */ +static inline void txx9_clear64(__u64 __iomem *adr, __u64 bits) +{ +#ifdef CONFIG_32BIT + unsigned long flags; + local_irq_save(flags); +#endif + ____raw_writeq(____raw_readq(adr) & ~bits, adr); +#ifdef CONFIG_32BIT + local_irq_restore(flags); +#endif +} +static inline void txx9_set64(__u64 __iomem *adr, __u64 bits) +{ +#ifdef CONFIG_32BIT + unsigned long flags; + local_irq_save(flags); +#endif + ____raw_writeq(____raw_readq(adr) | bits, adr); +#ifdef CONFIG_32BIT + local_irq_restore(flags); +#endif +} + +/* These functions are not interrupt safe. */ +static inline void tx4927_ccfg_clear(__u64 bits) +{ + ____raw_writeq(____raw_readq(&tx4927_ccfgptr->ccfg) + & ~(TX4927_CCFG_W1CBITS | bits), + &tx4927_ccfgptr->ccfg); +} +static inline void tx4927_ccfg_set(__u64 bits) +{ + ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg) + & ~TX4927_CCFG_W1CBITS) | bits, + &tx4927_ccfgptr->ccfg); +} +static inline void tx4927_ccfg_change(__u64 change, __u64 new) +{ + ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg) + & ~(TX4927_CCFG_W1CBITS | change)) | + new, + &tx4927_ccfgptr->ccfg); +} + +unsigned int tx4927_get_mem_size(void); +void tx4927_wdt_init(void); +void tx4927_setup(void); +void tx4927_time_init(unsigned int tmrnr); +void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask); +int tx4927_report_pciclk(void); +int tx4927_pciclk66_setup(void); +void tx4927_setup_pcierr_irq(void); +void tx4927_irq_init(void); +void tx4927_mtd_init(int ch); + +#endif /* __ASM_TXX9_TX4927_H */ diff --git a/arch/mips/include/asm/txx9/tx4927pcic.h b/arch/mips/include/asm/txx9/tx4927pcic.h new file mode 100644 index 000000000000..c470b8a5fe57 --- /dev/null +++ b/arch/mips/include/asm/txx9/tx4927pcic.h @@ -0,0 +1,203 @@ +/* + * include/asm-mips/txx9/tx4927pcic.h + * TX4927 PCI controller definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9_TX4927PCIC_H +#define __ASM_TXX9_TX4927PCIC_H + +#include +#include + +struct tx4927_pcic_reg { + u32 pciid; + u32 pcistatus; + u32 pciccrev; + u32 pcicfg1; + u32 p2gm0plbase; /* +10 */ + u32 p2gm0pubase; + u32 p2gm1plbase; + u32 p2gm1pubase; + u32 p2gm2pbase; /* +20 */ + u32 p2giopbase; + u32 unused0; + u32 pcisid; + u32 unused1; /* +30 */ + u32 pcicapptr; + u32 unused2; + u32 pcicfg2; + u32 g2ptocnt; /* +40 */ + u32 unused3[15]; + u32 g2pstatus; /* +80 */ + u32 g2pmask; + u32 pcisstatus; + u32 pcimask; + u32 p2gcfg; /* +90 */ + u32 p2gstatus; + u32 p2gmask; + u32 p2gccmd; + u32 unused4[24]; /* +a0 */ + u32 pbareqport; /* +100 */ + u32 pbacfg; + u32 pbastatus; + u32 pbamask; + u32 pbabm; /* +110 */ + u32 pbacreq; + u32 pbacgnt; + u32 pbacstate; + u64 g2pmgbase[3]; /* +120 */ + u64 g2piogbase; + u32 g2pmmask[3]; /* +140 */ + u32 g2piomask; + u64 g2pmpbase[3]; /* +150 */ + u64 g2piopbase; + u32 pciccfg; /* +170 */ + u32 pcicstatus; + u32 pcicmask; + u32 unused5; + u64 p2gmgbase[3]; /* +180 */ + u64 p2giogbase; + u32 g2pcfgadrs; /* +1a0 */ + u32 g2pcfgdata; + u32 unused6[8]; + u32 g2pintack; + u32 g2pspc; + u32 unused7[12]; /* +1d0 */ + u64 pdmca; /* +200 */ + u64 pdmga; + u64 pdmpa; + u64 pdmctr; + u64 pdmcfg; /* +220 */ + u64 pdmsts; +}; + +/* bits for PCICMD */ +/* see PCI_COMMAND_XXX in linux/pci_regs.h */ + +/* bits for PCISTAT */ +/* see PCI_STATUS_XXX in linux/pci_regs.h */ + +/* bits for IOBA/MBA */ +/* see PCI_BASE_ADDRESS_XXX in linux/pci_regs.h */ + +/* bits for G2PSTATUS/G2PMASK */ +#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003 +#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002 +#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001 + +/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci_regs.h */ +#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900 + +/* bits for PBACFG */ +#define TX4927_PCIC_PBACFG_FIXPA 0x00000008 +#define TX4927_PCIC_PBACFG_RPBA 0x00000004 +#define TX4927_PCIC_PBACFG_PBAEN 0x00000002 +#define TX4927_PCIC_PBACFG_BMCEN 0x00000001 + +/* bits for PBASTATUS/PBAMASK */ +#define TX4927_PCIC_PBASTATUS_ALL 0x00000001 +#define TX4927_PCIC_PBASTATUS_BM 0x00000001 + +/* bits for G2PMnGBASE */ +#define TX4927_PCIC_G2PMnGBASE_BSDIS 0x0000002000000000ULL +#define TX4927_PCIC_G2PMnGBASE_ECHG 0x0000001000000000ULL + +/* bits for G2PIOGBASE */ +#define TX4927_PCIC_G2PIOGBASE_BSDIS 0x0000002000000000ULL +#define TX4927_PCIC_G2PIOGBASE_ECHG 0x0000001000000000ULL + +/* bits for PCICSTATUS/PCICMASK */ +#define TX4927_PCIC_PCICSTATUS_ALL 0x000007b8 +#define TX4927_PCIC_PCICSTATUS_PME 0x00000400 +#define TX4927_PCIC_PCICSTATUS_TLB 0x00000200 +#define TX4927_PCIC_PCICSTATUS_NIB 0x00000100 +#define TX4927_PCIC_PCICSTATUS_ZIB 0x00000080 +#define TX4927_PCIC_PCICSTATUS_PERR 0x00000020 +#define TX4927_PCIC_PCICSTATUS_SERR 0x00000010 +#define TX4927_PCIC_PCICSTATUS_GBE 0x00000008 +#define TX4927_PCIC_PCICSTATUS_IWB 0x00000002 +#define TX4927_PCIC_PCICSTATUS_E2PDONE 0x00000001 + +/* bits for PCICCFG */ +#define TX4927_PCIC_PCICCFG_GBWC_MASK 0x0fff0000 +#define TX4927_PCIC_PCICCFG_HRST 0x00000800 +#define TX4927_PCIC_PCICCFG_SRST 0x00000400 +#define TX4927_PCIC_PCICCFG_IRBER 0x00000200 +#define TX4927_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch)) +#define TX4927_PCIC_PCICCFG_G2PM0EN 0x00000100 +#define TX4927_PCIC_PCICCFG_G2PM1EN 0x00000080 +#define TX4927_PCIC_PCICCFG_G2PM2EN 0x00000040 +#define TX4927_PCIC_PCICCFG_G2PIOEN 0x00000020 +#define TX4927_PCIC_PCICCFG_TCAR 0x00000010 +#define TX4927_PCIC_PCICCFG_ICAEN 0x00000008 + +/* bits for P2GMnGBASE */ +#define TX4927_PCIC_P2GMnGBASE_TMEMEN 0x0000004000000000ULL +#define TX4927_PCIC_P2GMnGBASE_TBSDIS 0x0000002000000000ULL +#define TX4927_PCIC_P2GMnGBASE_TECHG 0x0000001000000000ULL + +/* bits for P2GIOGBASE */ +#define TX4927_PCIC_P2GIOGBASE_TIOEN 0x0000004000000000ULL +#define TX4927_PCIC_P2GIOGBASE_TBSDIS 0x0000002000000000ULL +#define TX4927_PCIC_P2GIOGBASE_TECHG 0x0000001000000000ULL + +#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) +#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32) + +/* bits for PDMCFG */ +#define TX4927_PCIC_PDMCFG_RSTFIFO 0x00200000 +#define TX4927_PCIC_PDMCFG_EXFER 0x00100000 +#define TX4927_PCIC_PDMCFG_REQDLY_MASK 0x00003800 +#define TX4927_PCIC_PDMCFG_REQDLY_NONE (0 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_16 (1 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_32 (2 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_64 (3 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_128 (4 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_256 (5 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_512 (6 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_1024 (7 << 11) +#define TX4927_PCIC_PDMCFG_ERRIE 0x00000400 +#define TX4927_PCIC_PDMCFG_NCCMPIE 0x00000200 +#define TX4927_PCIC_PDMCFG_NTCMPIE 0x00000100 +#define TX4927_PCIC_PDMCFG_CHNEN 0x00000080 +#define TX4927_PCIC_PDMCFG_XFRACT 0x00000040 +#define TX4927_PCIC_PDMCFG_BSWAP 0x00000020 +#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c +#define TX4927_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000 +#define TX4927_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004 +#define TX4927_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008 +#define TX4927_PCIC_PDMCFG_XFRDIRC 0x00000002 +#define TX4927_PCIC_PDMCFG_CHRST 0x00000001 + +/* bits for PDMSTS */ +#define TX4927_PCIC_PDMSTS_REQCNT_MASK 0x3f000000 +#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000 +#define TX4927_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000 +#define TX4927_PCIC_PDMSTS_FIFORP_MASK 0x00030000 +#define TX4927_PCIC_PDMSTS_ERRINT 0x00000800 +#define TX4927_PCIC_PDMSTS_DONEINT 0x00000400 +#define TX4927_PCIC_PDMSTS_CHNEN 0x00000200 +#define TX4927_PCIC_PDMSTS_XFRACT 0x00000100 +#define TX4927_PCIC_PDMSTS_ACCMP 0x00000080 +#define TX4927_PCIC_PDMSTS_NCCMP 0x00000040 +#define TX4927_PCIC_PDMSTS_NTCMP 0x00000020 +#define TX4927_PCIC_PDMSTS_CFGERR 0x00000008 +#define TX4927_PCIC_PDMSTS_PCIERR 0x00000004 +#define TX4927_PCIC_PDMSTS_CHNERR 0x00000002 +#define TX4927_PCIC_PDMSTS_DATAERR 0x00000001 +#define TX4927_PCIC_PDMSTS_ALL_CMP 0x000000e0 +#define TX4927_PCIC_PDMSTS_ALL_ERR 0x0000000f + +struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr( + struct pci_controller *channel); +void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, + struct pci_controller *channel, int extarb); +void tx4927_report_pcic_status(void); +char *tx4927_pcibios_setup(char *str); +void tx4927_dump_pcic_settings(void); +irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id); + +#endif /* __ASM_TXX9_TX4927PCIC_H */ diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h new file mode 100644 index 000000000000..989e7751135a --- /dev/null +++ b/arch/mips/include/asm/txx9/tx4938.h @@ -0,0 +1,295 @@ +/* + * Definitions for TX4937/TX4938 + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#ifndef __ASM_TXX9_TX4938_H +#define __ASM_TXX9_TX4938_H + +/* some controllers are compatible with 4927 */ +#include + +#ifdef CONFIG_64BIT +#define TX4938_REG_BASE 0xffffffffff1f0000UL /* == TX4937_REG_BASE */ +#else +#define TX4938_REG_BASE 0xff1f0000UL /* == TX4937_REG_BASE */ +#endif +#define TX4938_REG_SIZE 0x00010000 /* == TX4937_REG_SIZE */ + +/* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */ +#define TX4938_NDFMC_REG (TX4938_REG_BASE + 0x5000) +#define TX4938_SRAMC_REG (TX4938_REG_BASE + 0x6000) +#define TX4938_PCIC1_REG (TX4938_REG_BASE + 0x7000) +#define TX4938_SDRAMC_REG (TX4938_REG_BASE + 0x8000) +#define TX4938_EBUSC_REG (TX4938_REG_BASE + 0x9000) +#define TX4938_DMA_REG(ch) (TX4938_REG_BASE + 0xb000 + (ch) * 0x800) +#define TX4938_PCIC_REG (TX4938_REG_BASE + 0xd000) +#define TX4938_CCFG_REG (TX4938_REG_BASE + 0xe000) +#define TX4938_NR_TMR 3 +#define TX4938_TMR_REG(ch) ((TX4938_REG_BASE + 0xf000) + (ch) * 0x100) +#define TX4938_NR_SIO 2 +#define TX4938_SIO_REG(ch) ((TX4938_REG_BASE + 0xf300) + (ch) * 0x100) +#define TX4938_PIO_REG (TX4938_REG_BASE + 0xf500) +#define TX4938_IRC_REG (TX4938_REG_BASE + 0xf600) +#define TX4938_ACLC_REG (TX4938_REG_BASE + 0xf700) +#define TX4938_SPI_REG (TX4938_REG_BASE + 0xf800) + +struct tx4938_sramc_reg { + u64 cr; +}; + +struct tx4938_ccfg_reg { + u64 ccfg; + u64 crir; + u64 pcfg; + u64 toea; + u64 clkctr; + u64 unused0; + u64 garbc; + u64 unused1; + u64 unused2; + u64 ramp; + u64 unused3; + u64 jmpadr; +}; + +/* + * IRC + */ + +#define TX4938_IR_ECCERR 0 +#define TX4938_IR_WTOERR 1 +#define TX4938_NUM_IR_INT 6 +#define TX4938_IR_INT(n) (2 + (n)) +#define TX4938_NUM_IR_SIO 2 +#define TX4938_IR_SIO(n) (8 + (n)) +#define TX4938_NUM_IR_DMA 4 +#define TX4938_IR_DMA(ch, n) ((ch ? 27 : 10) + (n)) /* 10-13, 27-30 */ +#define TX4938_IR_PIO 14 +#define TX4938_IR_PDMAC 15 +#define TX4938_IR_PCIC 16 +#define TX4938_NUM_IR_TMR 3 +#define TX4938_IR_TMR(n) (17 + (n)) +#define TX4938_IR_NDFMC 21 +#define TX4938_IR_PCIERR 22 +#define TX4938_IR_PCIPME 23 +#define TX4938_IR_ACLC 24 +#define TX4938_IR_ACLCPME 25 +#define TX4938_IR_PCIC1 26 +#define TX4938_IR_SPI 31 +#define TX4938_NUM_IR 32 +/* multiplex */ +#define TX4938_IR_ETH0 TX4938_IR_INT(4) +#define TX4938_IR_ETH1 TX4938_IR_INT(3) + +#define TX4938_IRC_INT 2 /* IP[2] in Status register */ + +#define TX4938_NUM_PIO 16 + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX4938_CCFG_WDRST 0x0000020000000000ULL +#define TX4938_CCFG_WDREXEN 0x0000010000000000ULL +#define TX4938_CCFG_BCFG_MASK 0x000000ff00000000ULL +#define TX4938_CCFG_TINTDIS 0x01000000 +#define TX4938_CCFG_PCI66 0x00800000 +#define TX4938_CCFG_PCIMODE 0x00400000 +#define TX4938_CCFG_PCI1_66 0x00200000 +#define TX4938_CCFG_DIVMODE_MASK 0x001e0000 +#define TX4938_CCFG_DIVMODE_2 (0x4 << 17) +#define TX4938_CCFG_DIVMODE_2_5 (0xf << 17) +#define TX4938_CCFG_DIVMODE_3 (0x5 << 17) +#define TX4938_CCFG_DIVMODE_4 (0x6 << 17) +#define TX4938_CCFG_DIVMODE_4_5 (0xd << 17) +#define TX4938_CCFG_DIVMODE_8 (0x0 << 17) +#define TX4938_CCFG_DIVMODE_10 (0xb << 17) +#define TX4938_CCFG_DIVMODE_12 (0x1 << 17) +#define TX4938_CCFG_DIVMODE_16 (0x2 << 17) +#define TX4938_CCFG_DIVMODE_18 (0x9 << 17) +#define TX4938_CCFG_BEOW 0x00010000 +#define TX4938_CCFG_WR 0x00008000 +#define TX4938_CCFG_TOE 0x00004000 +#define TX4938_CCFG_PCIARB 0x00002000 +#define TX4938_CCFG_PCIDIVMODE_MASK 0x00001c00 +#define TX4938_CCFG_PCIDIVMODE_4 (0x1 << 10) +#define TX4938_CCFG_PCIDIVMODE_4_5 (0x3 << 10) +#define TX4938_CCFG_PCIDIVMODE_5 (0x5 << 10) +#define TX4938_CCFG_PCIDIVMODE_5_5 (0x7 << 10) +#define TX4938_CCFG_PCIDIVMODE_8 (0x0 << 10) +#define TX4938_CCFG_PCIDIVMODE_9 (0x2 << 10) +#define TX4938_CCFG_PCIDIVMODE_10 (0x4 << 10) +#define TX4938_CCFG_PCIDIVMODE_11 (0x6 << 10) +#define TX4938_CCFG_PCI1DMD 0x00000100 +#define TX4938_CCFG_SYSSP_MASK 0x000000c0 +#define TX4938_CCFG_ENDIAN 0x00000004 +#define TX4938_CCFG_HALT 0x00000002 +#define TX4938_CCFG_ACEHOLD 0x00000001 + +/* PCFG : Pin Configuration */ +#define TX4938_PCFG_ETH0_SEL 0x8000000000000000ULL +#define TX4938_PCFG_ETH1_SEL 0x4000000000000000ULL +#define TX4938_PCFG_ATA_SEL 0x2000000000000000ULL +#define TX4938_PCFG_ISA_SEL 0x1000000000000000ULL +#define TX4938_PCFG_SPI_SEL 0x0800000000000000ULL +#define TX4938_PCFG_NDF_SEL 0x0400000000000000ULL +#define TX4938_PCFG_SDCLKDLY_MASK 0x30000000 +#define TX4938_PCFG_SDCLKDLY(d) ((d)<<28) +#define TX4938_PCFG_SYSCLKEN 0x08000000 +#define TX4938_PCFG_SDCLKEN_ALL 0x07800000 +#define TX4938_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) +#define TX4938_PCFG_PCICLKEN_ALL 0x003f0000 +#define TX4938_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) +#define TX4938_PCFG_SEL2 0x00000200 +#define TX4938_PCFG_SEL1 0x00000100 +#define TX4938_PCFG_DMASEL_ALL 0x0000000f +#define TX4938_PCFG_DMASEL0_DRQ0 0x00000000 +#define TX4938_PCFG_DMASEL0_SIO1 0x00000001 +#define TX4938_PCFG_DMASEL1_DRQ1 0x00000000 +#define TX4938_PCFG_DMASEL1_SIO1 0x00000002 +#define TX4938_PCFG_DMASEL2_DRQ2 0x00000000 +#define TX4938_PCFG_DMASEL2_SIO0 0x00000004 +#define TX4938_PCFG_DMASEL3_DRQ3 0x00000000 +#define TX4938_PCFG_DMASEL3_SIO0 0x00000008 + +/* CLKCTR : Clock Control */ +#define TX4938_CLKCTR_NDFCKD 0x0001000000000000ULL +#define TX4938_CLKCTR_NDFRST 0x0000000100000000ULL +#define TX4938_CLKCTR_ETH1CKD 0x80000000 +#define TX4938_CLKCTR_ETH0CKD 0x40000000 +#define TX4938_CLKCTR_SPICKD 0x20000000 +#define TX4938_CLKCTR_SRAMCKD 0x10000000 +#define TX4938_CLKCTR_PCIC1CKD 0x08000000 +#define TX4938_CLKCTR_DMA1CKD 0x04000000 +#define TX4938_CLKCTR_ACLCKD 0x02000000 +#define TX4938_CLKCTR_PIOCKD 0x01000000 +#define TX4938_CLKCTR_DMACKD 0x00800000 +#define TX4938_CLKCTR_PCICKD 0x00400000 +#define TX4938_CLKCTR_TM0CKD 0x00100000 +#define TX4938_CLKCTR_TM1CKD 0x00080000 +#define TX4938_CLKCTR_TM2CKD 0x00040000 +#define TX4938_CLKCTR_SIO0CKD 0x00020000 +#define TX4938_CLKCTR_SIO1CKD 0x00010000 +#define TX4938_CLKCTR_ETH1RST 0x00008000 +#define TX4938_CLKCTR_ETH0RST 0x00004000 +#define TX4938_CLKCTR_SPIRST 0x00002000 +#define TX4938_CLKCTR_SRAMRST 0x00001000 +#define TX4938_CLKCTR_PCIC1RST 0x00000800 +#define TX4938_CLKCTR_DMA1RST 0x00000400 +#define TX4938_CLKCTR_ACLRST 0x00000200 +#define TX4938_CLKCTR_PIORST 0x00000100 +#define TX4938_CLKCTR_DMARST 0x00000080 +#define TX4938_CLKCTR_PCIRST 0x00000040 +#define TX4938_CLKCTR_TM0RST 0x00000010 +#define TX4938_CLKCTR_TM1RST 0x00000008 +#define TX4938_CLKCTR_TM2RST 0x00000004 +#define TX4938_CLKCTR_SIO0RST 0x00000002 +#define TX4938_CLKCTR_SIO1RST 0x00000001 + +/* + * DMA + */ +/* bits for MCR */ +#define TX4938_DMA_MCR_EIS(ch) (0x10000000<<(ch)) +#define TX4938_DMA_MCR_DIS(ch) (0x01000000<<(ch)) +#define TX4938_DMA_MCR_RSFIF 0x00000080 +#define TX4938_DMA_MCR_FIFUM(ch) (0x00000008<<(ch)) +#define TX4938_DMA_MCR_RPRT 0x00000002 +#define TX4938_DMA_MCR_MSTEN 0x00000001 + +/* bits for CCRn */ +#define TX4938_DMA_CCR_IMMCHN 0x20000000 +#define TX4938_DMA_CCR_USEXFSZ 0x10000000 +#define TX4938_DMA_CCR_LE 0x08000000 +#define TX4938_DMA_CCR_DBINH 0x04000000 +#define TX4938_DMA_CCR_SBINH 0x02000000 +#define TX4938_DMA_CCR_CHRST 0x01000000 +#define TX4938_DMA_CCR_RVBYTE 0x00800000 +#define TX4938_DMA_CCR_ACKPOL 0x00400000 +#define TX4938_DMA_CCR_REQPL 0x00200000 +#define TX4938_DMA_CCR_EGREQ 0x00100000 +#define TX4938_DMA_CCR_CHDN 0x00080000 +#define TX4938_DMA_CCR_DNCTL 0x00060000 +#define TX4938_DMA_CCR_EXTRQ 0x00010000 +#define TX4938_DMA_CCR_INTRQD 0x0000e000 +#define TX4938_DMA_CCR_INTENE 0x00001000 +#define TX4938_DMA_CCR_INTENC 0x00000800 +#define TX4938_DMA_CCR_INTENT 0x00000400 +#define TX4938_DMA_CCR_CHNEN 0x00000200 +#define TX4938_DMA_CCR_XFACT 0x00000100 +#define TX4938_DMA_CCR_SMPCHN 0x00000020 +#define TX4938_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c) +#define TX4938_DMA_CCR_XFSZ_1W TX4938_DMA_CCR_XFSZ(2) +#define TX4938_DMA_CCR_XFSZ_2W TX4938_DMA_CCR_XFSZ(3) +#define TX4938_DMA_CCR_XFSZ_4W TX4938_DMA_CCR_XFSZ(4) +#define TX4938_DMA_CCR_XFSZ_8W TX4938_DMA_CCR_XFSZ(5) +#define TX4938_DMA_CCR_XFSZ_16W TX4938_DMA_CCR_XFSZ(6) +#define TX4938_DMA_CCR_XFSZ_32W TX4938_DMA_CCR_XFSZ(7) +#define TX4938_DMA_CCR_MEMIO 0x00000002 +#define TX4938_DMA_CCR_SNGAD 0x00000001 + +/* bits for CSRn */ +#define TX4938_DMA_CSR_CHNEN 0x00000400 +#define TX4938_DMA_CSR_STLXFER 0x00000200 +#define TX4938_DMA_CSR_CHNACT 0x00000100 +#define TX4938_DMA_CSR_ABCHC 0x00000080 +#define TX4938_DMA_CSR_NCHNC 0x00000040 +#define TX4938_DMA_CSR_NTRNFC 0x00000020 +#define TX4938_DMA_CSR_EXTDN 0x00000010 +#define TX4938_DMA_CSR_CFERR 0x00000008 +#define TX4938_DMA_CSR_CHERR 0x00000004 +#define TX4938_DMA_CSR_DESERR 0x00000002 +#define TX4938_DMA_CSR_SORERR 0x00000001 + +#define tx4938_sdramcptr tx4927_sdramcptr +#define tx4938_ebuscptr tx4927_ebuscptr +#define tx4938_pcicptr tx4927_pcicptr +#define tx4938_pcic1ptr \ + ((struct tx4927_pcic_reg __iomem *)TX4938_PCIC1_REG) +#define tx4938_ccfgptr \ + ((struct tx4938_ccfg_reg __iomem *)TX4938_CCFG_REG) +#define tx4938_pioptr ((struct txx9_pio_reg __iomem *)TX4938_PIO_REG) +#define tx4938_sramcptr \ + ((struct tx4938_sramc_reg __iomem *)TX4938_SRAMC_REG) + + +#define TX4938_REV_PCODE() \ + ((__u32)__raw_readq(&tx4938_ccfgptr->crir) >> 16) + +#define tx4938_ccfg_clear(bits) tx4927_ccfg_clear(bits) +#define tx4938_ccfg_set(bits) tx4927_ccfg_set(bits) +#define tx4938_ccfg_change(change, new) tx4927_ccfg_change(change, new) + +#define TX4938_SDRAMC_CR(ch) TX4927_SDRAMC_CR(ch) +#define TX4938_SDRAMC_BA(ch) TX4927_SDRAMC_BA(ch) +#define TX4938_SDRAMC_SIZE(ch) TX4927_SDRAMC_SIZE(ch) + +#define TX4938_EBUSC_CR(ch) TX4927_EBUSC_CR(ch) +#define TX4938_EBUSC_BA(ch) TX4927_EBUSC_BA(ch) +#define TX4938_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch) +#define TX4938_EBUSC_WIDTH(ch) TX4927_EBUSC_WIDTH(ch) + +#define tx4938_get_mem_size() tx4927_get_mem_size() +void tx4938_wdt_init(void); +void tx4938_setup(void); +void tx4938_time_init(unsigned int tmrnr); +void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask); +void tx4938_spi_init(int busid); +void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1); +int tx4938_report_pciclk(void); +void tx4938_report_pci1clk(void); +int tx4938_pciclk66_setup(void); +struct pci_dev; +int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot); +void tx4938_setup_pcierr_irq(void); +void tx4938_irq_init(void); +void tx4938_mtd_init(int ch); + +#endif diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h new file mode 100644 index 000000000000..7ce2dff3b7cc --- /dev/null +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -0,0 +1,544 @@ +/* + * Definitions for TX4939 + * + * Copyright (C) 2000-2001,2005-2006 Toshiba Corporation + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_TXX9_TX4939_H +#define __ASM_TXX9_TX4939_H + +/* some controllers are compatible with 4927/4938 */ +#include + +#ifdef CONFIG_64BIT +#define TX4939_REG_BASE 0xffffffffff1f0000UL /* == TX4938_REG_BASE */ +#else +#define TX4939_REG_BASE 0xff1f0000UL /* == TX4938_REG_BASE */ +#endif +#define TX4939_REG_SIZE 0x00010000 /* == TX4938_REG_SIZE */ + +#define TX4939_ATA_REG(ch) (TX4939_REG_BASE + 0x3000 + (ch) * 0x1000) +#define TX4939_NDFMC_REG (TX4939_REG_BASE + 0x5000) +#define TX4939_SRAMC_REG (TX4939_REG_BASE + 0x6000) +#define TX4939_CRYPTO_REG (TX4939_REG_BASE + 0x6800) +#define TX4939_PCIC1_REG (TX4939_REG_BASE + 0x7000) +#define TX4939_DDRC_REG (TX4939_REG_BASE + 0x8000) +#define TX4939_EBUSC_REG (TX4939_REG_BASE + 0x9000) +#define TX4939_VPC_REG (TX4939_REG_BASE + 0xa000) +#define TX4939_DMA_REG(ch) (TX4939_REG_BASE + 0xb000 + (ch) * 0x800) +#define TX4939_PCIC_REG (TX4939_REG_BASE + 0xd000) +#define TX4939_CCFG_REG (TX4939_REG_BASE + 0xe000) +#define TX4939_IRC_REG (TX4939_REG_BASE + 0xe800) +#define TX4939_NR_TMR 6 /* 0xf000,0xf100,0xf200,0xfd00,0xfe00,0xff00 */ +#define TX4939_TMR_REG(ch) \ + (TX4939_REG_BASE + 0xf000 + ((ch) + ((ch) >= 3) * 10) * 0x100) +#define TX4939_NR_SIO 4 /* 0xf300, 0xf400, 0xf380, 0xf480 */ +#define TX4939_SIO_REG(ch) \ + (TX4939_REG_BASE + 0xf300 + (((ch) & 1) << 8) + (((ch) & 2) << 6)) +#define TX4939_ACLC_REG (TX4939_REG_BASE + 0xf700) +#define TX4939_SPI_REG (TX4939_REG_BASE + 0xf800) +#define TX4939_I2C_REG (TX4939_REG_BASE + 0xf900) +#define TX4939_I2S_REG (TX4939_REG_BASE + 0xfa00) +#define TX4939_RTC_REG (TX4939_REG_BASE + 0xfb00) +#define TX4939_CIR_REG (TX4939_REG_BASE + 0xfc00) + +struct tx4939_le_reg { + __u32 r; + __u32 unused; +}; + +struct tx4939_ddrc_reg { + struct tx4939_le_reg ctl[47]; + __u64 unused0[17]; + __u64 winen; + __u64 win[4]; +}; + +struct tx4939_ccfg_reg { + __u64 ccfg; + __u64 crir; + __u64 pcfg; + __u64 toea; + __u64 clkctr; + __u64 unused0; + __u64 garbc; + __u64 unused1[2]; + __u64 ramp; + __u64 unused2[2]; + __u64 dskwctrl; + __u64 mclkosc; + __u64 mclkctl; + __u64 unused3[17]; + struct { + __u64 mr; + __u64 dr; + } gpio[2]; +}; + +struct tx4939_irc_reg { + struct tx4939_le_reg den; + struct tx4939_le_reg scipb; + struct tx4939_le_reg dm[2]; + struct tx4939_le_reg lvl[16]; + struct tx4939_le_reg msk; + struct tx4939_le_reg edc; + struct tx4939_le_reg pnd0; + struct tx4939_le_reg cs; + struct tx4939_le_reg pnd1; + struct tx4939_le_reg dm2[2]; + struct tx4939_le_reg dbr[2]; + struct tx4939_le_reg dben; + struct tx4939_le_reg unused0[2]; + struct tx4939_le_reg flag[2]; + struct tx4939_le_reg pol; + struct tx4939_le_reg cnt; + struct tx4939_le_reg maskint; + struct tx4939_le_reg maskext; +}; + +struct tx4939_rtc_reg { + __u32 ctl; + __u32 adr; + __u32 dat; + __u32 tbc; +}; + +struct tx4939_crypto_reg { + struct tx4939_le_reg csr; + struct tx4939_le_reg idesptr; + struct tx4939_le_reg cdesptr; + struct tx4939_le_reg buserr; + struct tx4939_le_reg cip_tout; + struct tx4939_le_reg cir; + union { + struct { + struct tx4939_le_reg data[8]; + struct tx4939_le_reg ctrl; + } gen; + struct { + struct { + struct tx4939_le_reg l; + struct tx4939_le_reg u; + } key[3], ini; + struct tx4939_le_reg ctrl; + } des; + struct { + struct tx4939_le_reg key[4]; + struct tx4939_le_reg ini[4]; + struct tx4939_le_reg ctrl; + } aes; + struct { + struct { + struct tx4939_le_reg l; + struct tx4939_le_reg u; + } cnt; + struct tx4939_le_reg ini[5]; + struct tx4939_le_reg unused; + struct tx4939_le_reg ctrl; + } hash; + } cdr; + struct tx4939_le_reg unused0[7]; + struct tx4939_le_reg rcsr; + struct tx4939_le_reg rpr; + __u64 rdr; + __u64 ror[3]; + struct tx4939_le_reg unused1[2]; + struct tx4939_le_reg xorslr; + struct tx4939_le_reg xorsur; +}; + +struct tx4939_crypto_desc { + __u32 src; + __u32 dst; + __u32 next; + __u32 ctrl; + __u32 index; + __u32 xor; +}; + +struct tx4939_vpc_reg { + struct tx4939_le_reg csr; + struct { + struct tx4939_le_reg ctrlA; + struct tx4939_le_reg ctrlB; + struct tx4939_le_reg idesptr; + struct tx4939_le_reg cdesptr; + } port[3]; + struct tx4939_le_reg buserr; +}; + +struct tx4939_vpc_desc { + __u32 src; + __u32 next; + __u32 ctrl1; + __u32 ctrl2; +}; + +/* + * IRC + */ +#define TX4939_IR_NONE 0 +#define TX4939_IR_DDR 1 +#define TX4939_IR_WTOERR 2 +#define TX4939_NUM_IR_INT 3 +#define TX4939_IR_INT(n) (3 + (n)) +#define TX4939_NUM_IR_ETH 2 +#define TX4939_IR_ETH(n) ((n) ? 43 : 6) +#define TX4939_IR_VIDEO 7 +#define TX4939_IR_CIR 8 +#define TX4939_NUM_IR_SIO 4 +#define TX4939_IR_SIO(n) ((n) ? 43 + (n) : 9) /* 9,44-46 */ +#define TX4939_NUM_IR_DMA 4 +#define TX4939_IR_DMA(ch, n) (((ch) ? 22 : 10) + (n)) /* 10-13,22-25 */ +#define TX4939_IR_IRC 14 +#define TX4939_IR_PDMAC 15 +#define TX4939_NUM_IR_TMR 6 +#define TX4939_IR_TMR(n) (((n) >= 3 ? 45 : 16) + (n)) /* 16-18,48-50 */ +#define TX4939_NUM_IR_ATA 2 +#define TX4939_IR_ATA(n) (19 + (n)) +#define TX4939_IR_ACLC 21 +#define TX4939_IR_CIPHER 26 +#define TX4939_IR_INTA 27 +#define TX4939_IR_INTB 28 +#define TX4939_IR_INTC 29 +#define TX4939_IR_INTD 30 +#define TX4939_IR_I2C 33 +#define TX4939_IR_SPI 34 +#define TX4939_IR_PCIC 35 +#define TX4939_IR_PCIC1 36 +#define TX4939_IR_PCIERR 37 +#define TX4939_IR_PCIPME 38 +#define TX4939_IR_NDFMC 39 +#define TX4939_IR_ACLCPME 40 +#define TX4939_IR_RTC 41 +#define TX4939_IR_RND 42 +#define TX4939_IR_I2S 47 +#define TX4939_NUM_IR 64 + +#define TX4939_IRC_INT 2 /* IP[2] in Status register */ + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX4939_CCFG_PCIBOOT 0x0000040000000000ULL +#define TX4939_CCFG_WDRST 0x0000020000000000ULL +#define TX4939_CCFG_WDREXEN 0x0000010000000000ULL +#define TX4939_CCFG_BCFG_MASK 0x000000ff00000000ULL +#define TX4939_CCFG_GTOT_MASK 0x06000000 +#define TX4939_CCFG_GTOT_4096 0x06000000 +#define TX4939_CCFG_GTOT_2048 0x04000000 +#define TX4939_CCFG_GTOT_1024 0x02000000 +#define TX4939_CCFG_GTOT_512 0x00000000 +#define TX4939_CCFG_TINTDIS 0x01000000 +#define TX4939_CCFG_PCI66 0x00800000 +#define TX4939_CCFG_PCIMODE 0x00400000 +#define TX4939_CCFG_SSCG 0x00100000 +#define TX4939_CCFG_MULCLK_MASK 0x000e0000 +#define TX4939_CCFG_MULCLK_8 (0x7 << 17) +#define TX4939_CCFG_MULCLK_9 (0x0 << 17) +#define TX4939_CCFG_MULCLK_10 (0x1 << 17) +#define TX4939_CCFG_MULCLK_11 (0x2 << 17) +#define TX4939_CCFG_MULCLK_12 (0x3 << 17) +#define TX4939_CCFG_MULCLK_13 (0x4 << 17) +#define TX4939_CCFG_MULCLK_14 (0x5 << 17) +#define TX4939_CCFG_MULCLK_15 (0x6 << 17) +#define TX4939_CCFG_BEOW 0x00010000 +#define TX4939_CCFG_WR 0x00008000 +#define TX4939_CCFG_TOE 0x00004000 +#define TX4939_CCFG_PCIARB 0x00002000 +#define TX4939_CCFG_YDIVMODE_MASK 0x00001c00 +#define TX4939_CCFG_YDIVMODE_2 (0x0 << 10) +#define TX4939_CCFG_YDIVMODE_3 (0x1 << 10) +#define TX4939_CCFG_YDIVMODE_5 (0x6 << 10) +#define TX4939_CCFG_YDIVMODE_6 (0x7 << 10) +#define TX4939_CCFG_PTSEL 0x00000200 +#define TX4939_CCFG_BESEL 0x00000100 +#define TX4939_CCFG_SYSSP_MASK 0x000000c0 +#define TX4939_CCFG_ACKSEL 0x00000020 +#define TX4939_CCFG_ROMW 0x00000010 +#define TX4939_CCFG_ENDIAN 0x00000004 +#define TX4939_CCFG_ARMODE 0x00000002 +#define TX4939_CCFG_ACEHOLD 0x00000001 + +/* PCFG : Pin Configuration */ +#define TX4939_PCFG_SIO2MODE_MASK 0xc000000000000000ULL +#define TX4939_PCFG_SIO2MODE_GPIO 0x8000000000000000ULL +#define TX4939_PCFG_SIO2MODE_SIO2 0x4000000000000000ULL +#define TX4939_PCFG_SIO2MODE_SIO0 0x0000000000000000ULL +#define TX4939_PCFG_SPIMODE 0x2000000000000000ULL +#define TX4939_PCFG_I2CMODE 0x1000000000000000ULL +#define TX4939_PCFG_I2SMODE_MASK 0x0c00000000000000ULL +#define TX4939_PCFG_I2SMODE_GPIO 0x0c00000000000000ULL +#define TX4939_PCFG_I2SMODE_I2S 0x0800000000000000ULL +#define TX4939_PCFG_I2SMODE_I2S_ALT 0x0400000000000000ULL +#define TX4939_PCFG_I2SMODE_ACLC 0x0000000000000000ULL +#define TX4939_PCFG_SIO3MODE 0x0200000000000000ULL +#define TX4939_PCFG_DMASEL3 0x0004000000000000ULL +#define TX4939_PCFG_DMASEL3_SIO0 0x0004000000000000ULL +#define TX4939_PCFG_DMASEL3_NDFC 0x0000000000000000ULL +#define TX4939_PCFG_VSSMODE 0x0000200000000000ULL +#define TX4939_PCFG_VPSMODE 0x0000100000000000ULL +#define TX4939_PCFG_ET1MODE 0x0000080000000000ULL +#define TX4939_PCFG_ET0MODE 0x0000040000000000ULL +#define TX4939_PCFG_ATA1MODE 0x0000020000000000ULL +#define TX4939_PCFG_ATA0MODE 0x0000010000000000ULL +#define TX4939_PCFG_BP_PLL 0x0000000100000000ULL + +#define TX4939_PCFG_SYSCLKEN 0x08000000 +#define TX4939_PCFG_PCICLKEN_ALL 0x000f0000 +#define TX4939_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) +#define TX4939_PCFG_SPEED1 0x00002000 +#define TX4939_PCFG_SPEED0 0x00001000 +#define TX4939_PCFG_ITMODE 0x00000300 +#define TX4939_PCFG_DMASEL_ALL (0x00000007 | TX4939_PCFG_DMASEL3) +#define TX4939_PCFG_DMASEL2 0x00000004 +#define TX4939_PCFG_DMASEL2_DRQ2 0x00000000 +#define TX4939_PCFG_DMASEL2_SIO0 0x00000004 +#define TX4939_PCFG_DMASEL1 0x00000002 +#define TX4939_PCFG_DMASEL1_DRQ1 0x00000000 +#define TX4939_PCFG_DMASEL0 0x00000001 +#define TX4939_PCFG_DMASEL0_DRQ0 0x00000000 + +/* CLKCTR : Clock Control */ +#define TX4939_CLKCTR_IOSCKD 0x8000000000000000ULL +#define TX4939_CLKCTR_SYSCKD 0x4000000000000000ULL +#define TX4939_CLKCTR_TM5CKD 0x2000000000000000ULL +#define TX4939_CLKCTR_TM4CKD 0x1000000000000000ULL +#define TX4939_CLKCTR_TM3CKD 0x0800000000000000ULL +#define TX4939_CLKCTR_CIRCKD 0x0400000000000000ULL +#define TX4939_CLKCTR_SIO3CKD 0x0200000000000000ULL +#define TX4939_CLKCTR_SIO2CKD 0x0100000000000000ULL +#define TX4939_CLKCTR_SIO1CKD 0x0080000000000000ULL +#define TX4939_CLKCTR_VPCCKD 0x0040000000000000ULL +#define TX4939_CLKCTR_EPCICKD 0x0020000000000000ULL +#define TX4939_CLKCTR_ETH1CKD 0x0008000000000000ULL +#define TX4939_CLKCTR_ATA1CKD 0x0004000000000000ULL +#define TX4939_CLKCTR_BROMCKD 0x0002000000000000ULL +#define TX4939_CLKCTR_NDCCKD 0x0001000000000000ULL +#define TX4939_CLKCTR_I2CCKD 0x0000800000000000ULL +#define TX4939_CLKCTR_ETH0CKD 0x0000400000000000ULL +#define TX4939_CLKCTR_SPICKD 0x0000200000000000ULL +#define TX4939_CLKCTR_SRAMCKD 0x0000100000000000ULL +#define TX4939_CLKCTR_PCI1CKD 0x0000080000000000ULL +#define TX4939_CLKCTR_DMA1CKD 0x0000040000000000ULL +#define TX4939_CLKCTR_ACLCKD 0x0000020000000000ULL +#define TX4939_CLKCTR_ATA0CKD 0x0000010000000000ULL +#define TX4939_CLKCTR_DMA0CKD 0x0000008000000000ULL +#define TX4939_CLKCTR_PCICCKD 0x0000004000000000ULL +#define TX4939_CLKCTR_I2SCKD 0x0000002000000000ULL +#define TX4939_CLKCTR_TM0CKD 0x0000001000000000ULL +#define TX4939_CLKCTR_TM1CKD 0x0000000800000000ULL +#define TX4939_CLKCTR_TM2CKD 0x0000000400000000ULL +#define TX4939_CLKCTR_SIO0CKD 0x0000000200000000ULL +#define TX4939_CLKCTR_CYPCKD 0x0000000100000000ULL +#define TX4939_CLKCTR_IOSRST 0x80000000 +#define TX4939_CLKCTR_SYSRST 0x40000000 +#define TX4939_CLKCTR_TM5RST 0x20000000 +#define TX4939_CLKCTR_TM4RST 0x10000000 +#define TX4939_CLKCTR_TM3RST 0x08000000 +#define TX4939_CLKCTR_CIRRST 0x04000000 +#define TX4939_CLKCTR_SIO3RST 0x02000000 +#define TX4939_CLKCTR_SIO2RST 0x01000000 +#define TX4939_CLKCTR_SIO1RST 0x00800000 +#define TX4939_CLKCTR_VPCRST 0x00400000 +#define TX4939_CLKCTR_EPCIRST 0x00200000 +#define TX4939_CLKCTR_ETH1RST 0x00080000 +#define TX4939_CLKCTR_ATA1RST 0x00040000 +#define TX4939_CLKCTR_BROMRST 0x00020000 +#define TX4939_CLKCTR_NDCRST 0x00010000 +#define TX4939_CLKCTR_I2CRST 0x00008000 +#define TX4939_CLKCTR_ETH0RST 0x00004000 +#define TX4939_CLKCTR_SPIRST 0x00002000 +#define TX4939_CLKCTR_SRAMRST 0x00001000 +#define TX4939_CLKCTR_PCI1RST 0x00000800 +#define TX4939_CLKCTR_DMA1RST 0x00000400 +#define TX4939_CLKCTR_ACLRST 0x00000200 +#define TX4939_CLKCTR_ATA0RST 0x00000100 +#define TX4939_CLKCTR_DMA0RST 0x00000080 +#define TX4939_CLKCTR_PCICRST 0x00000040 +#define TX4939_CLKCTR_I2SRST 0x00000020 +#define TX4939_CLKCTR_TM0RST 0x00000010 +#define TX4939_CLKCTR_TM1RST 0x00000008 +#define TX4939_CLKCTR_TM2RST 0x00000004 +#define TX4939_CLKCTR_SIO0RST 0x00000002 +#define TX4939_CLKCTR_CYPRST 0x00000001 + +/* + * RTC + */ +#define TX4939_RTCCTL_ALME 0x00000080 +#define TX4939_RTCCTL_ALMD 0x00000040 +#define TX4939_RTCCTL_BUSY 0x00000020 + +#define TX4939_RTCCTL_COMMAND 0x00000007 +#define TX4939_RTCCTL_COMMAND_NOP 0x00000000 +#define TX4939_RTCCTL_COMMAND_GETTIME 0x00000001 +#define TX4939_RTCCTL_COMMAND_SETTIME 0x00000002 +#define TX4939_RTCCTL_COMMAND_GETALARM 0x00000003 +#define TX4939_RTCCTL_COMMAND_SETALARM 0x00000004 + +#define TX4939_RTCTBC_PM 0x00000080 +#define TX4939_RTCTBC_COMP 0x0000007f + +#define TX4939_RTC_REG_RAMSIZE 0x00000100 +#define TX4939_RTC_REG_RWBSIZE 0x00000006 + +/* + * CRYPTO + */ +#define TX4939_CRYPTO_CSR_SAESO 0x08000000 +#define TX4939_CRYPTO_CSR_SAESI 0x04000000 +#define TX4939_CRYPTO_CSR_SDESO 0x02000000 +#define TX4939_CRYPTO_CSR_SDESI 0x01000000 +#define TX4939_CRYPTO_CSR_INDXBST_MASK 0x00700000 +#define TX4939_CRYPTO_CSR_INDXBST(n) ((n) << 20) +#define TX4939_CRYPTO_CSR_TOINT 0x00080000 +#define TX4939_CRYPTO_CSR_DCINT 0x00040000 +#define TX4939_CRYPTO_CSR_GBINT 0x00010000 +#define TX4939_CRYPTO_CSR_INDXAST_MASK 0x0000e000 +#define TX4939_CRYPTO_CSR_INDXAST(n) ((n) << 13) +#define TX4939_CRYPTO_CSR_CSWAP_MASK 0x00001800 +#define TX4939_CRYPTO_CSR_CSWAP_NONE 0x00000000 +#define TX4939_CRYPTO_CSR_CSWAP_IN 0x00000800 +#define TX4939_CRYPTO_CSR_CSWAP_OUT 0x00001000 +#define TX4939_CRYPTO_CSR_CSWAP_BOTH 0x00001800 +#define TX4939_CRYPTO_CSR_CDIV_MASK 0x00000600 +#define TX4939_CRYPTO_CSR_CDIV_DIV2 0x00000000 +#define TX4939_CRYPTO_CSR_CDIV_DIV1 0x00000200 +#define TX4939_CRYPTO_CSR_CDIV_DIV2ALT 0x00000400 +#define TX4939_CRYPTO_CSR_CDIV_DIV1ALT 0x00000600 +#define TX4939_CRYPTO_CSR_PDINT_MASK 0x000000c0 +#define TX4939_CRYPTO_CSR_PDINT_ALL 0x00000000 +#define TX4939_CRYPTO_CSR_PDINT_END 0x00000040 +#define TX4939_CRYPTO_CSR_PDINT_NEXT 0x00000080 +#define TX4939_CRYPTO_CSR_PDINT_NONE 0x000000c0 +#define TX4939_CRYPTO_CSR_GINTE 0x00000008 +#define TX4939_CRYPTO_CSR_RSTD 0x00000004 +#define TX4939_CRYPTO_CSR_RSTC 0x00000002 +#define TX4939_CRYPTO_CSR_ENCR 0x00000001 + +/* bits for tx4939_crypto_reg.cdr.gen.ctrl */ +#define TX4939_CRYPTO_CTX_ENGINE_MASK 0x00000003 +#define TX4939_CRYPTO_CTX_ENGINE_DES 0x00000000 +#define TX4939_CRYPTO_CTX_ENGINE_AES 0x00000001 +#define TX4939_CRYPTO_CTX_ENGINE_MD5 0x00000002 +#define TX4939_CRYPTO_CTX_ENGINE_SHA1 0x00000003 +#define TX4939_CRYPTO_CTX_TDMS 0x00000010 +#define TX4939_CRYPTO_CTX_CMS 0x00000020 +#define TX4939_CRYPTO_CTX_DMS 0x00000040 +#define TX4939_CRYPTO_CTX_UPDATE 0x00000080 + +/* bits for tx4939_crypto_desc.ctrl */ +#define TX4939_CRYPTO_DESC_OB_CNT_MASK 0xffe00000 +#define TX4939_CRYPTO_DESC_OB_CNT(cnt) ((cnt) << 21) +#define TX4939_CRYPTO_DESC_IB_CNT_MASK 0x001ffc00 +#define TX4939_CRYPTO_DESC_IB_CNT(cnt) ((cnt) << 10) +#define TX4939_CRYPTO_DESC_START 0x00000200 +#define TX4939_CRYPTO_DESC_END 0x00000100 +#define TX4939_CRYPTO_DESC_XOR 0x00000010 +#define TX4939_CRYPTO_DESC_LAST 0x00000008 +#define TX4939_CRYPTO_DESC_ERR_MASK 0x00000006 +#define TX4939_CRYPTO_DESC_ERR_NONE 0x00000000 +#define TX4939_CRYPTO_DESC_ERR_TOUT 0x00000002 +#define TX4939_CRYPTO_DESC_ERR_DIGEST 0x00000004 +#define TX4939_CRYPTO_DESC_OWN 0x00000001 + +/* bits for tx4939_crypto_desc.index */ +#define TX4939_CRYPTO_DESC_HASH_IDX_MASK 0x00000070 +#define TX4939_CRYPTO_DESC_HASH_IDX(idx) ((idx) << 4) +#define TX4939_CRYPTO_DESC_ENCRYPT_IDX_MASK 0x00000007 +#define TX4939_CRYPTO_DESC_ENCRYPT_IDX(idx) ((idx) << 0) + +#define TX4939_CRYPTO_NR_SET 6 + +#define TX4939_CRYPTO_RCSR_INTE 0x00000008 +#define TX4939_CRYPTO_RCSR_RST 0x00000004 +#define TX4939_CRYPTO_RCSR_FIN 0x00000002 +#define TX4939_CRYPTO_RCSR_ST 0x00000001 + +/* + * VPC + */ +#define TX4939_VPC_CSR_GBINT 0x00010000 +#define TX4939_VPC_CSR_SWAPO 0x00000020 +#define TX4939_VPC_CSR_SWAPI 0x00000010 +#define TX4939_VPC_CSR_GINTE 0x00000008 +#define TX4939_VPC_CSR_RSTD 0x00000004 +#define TX4939_VPC_CSR_RSTVPC 0x00000002 + +#define TX4939_VPC_CTRLA_VDPSN 0x00000200 +#define TX4939_VPC_CTRLA_PBUSY 0x00000100 +#define TX4939_VPC_CTRLA_DCINT 0x00000080 +#define TX4939_VPC_CTRLA_UOINT 0x00000040 +#define TX4939_VPC_CTRLA_PDINT_MASK 0x00000030 +#define TX4939_VPC_CTRLA_PDINT_ALL 0x00000000 +#define TX4939_VPC_CTRLA_PDINT_NEXT 0x00000010 +#define TX4939_VPC_CTRLA_PDINT_NONE 0x00000030 +#define TX4939_VPC_CTRLA_VDVLDP 0x00000008 +#define TX4939_VPC_CTRLA_VDMODE 0x00000004 +#define TX4939_VPC_CTRLA_VDFOR 0x00000002 +#define TX4939_VPC_CTRLA_ENVPC 0x00000001 + +/* bits for tx4939_vpc_desc.ctrl1 */ +#define TX4939_VPC_DESC_CTRL1_ERR_MASK 0x00000006 +#define TX4939_VPC_DESC_CTRL1_OWN 0x00000001 + +#define tx4939_ddrcptr ((struct tx4939_ddrc_reg __iomem *)TX4939_DDRC_REG) +#define tx4939_ebuscptr tx4938_ebuscptr +#define tx4939_ircptr \ + ((struct tx4939_irc_reg __iomem *)TX4939_IRC_REG) +#define tx4939_pcicptr tx4938_pcicptr +#define tx4939_pcic1ptr tx4938_pcic1ptr +#define tx4939_ccfgptr \ + ((struct tx4939_ccfg_reg __iomem *)TX4939_CCFG_REG) +#define tx4939_sramcptr tx4938_sramcptr +#define tx4939_rtcptr \ + ((struct tx4939_rtc_reg __iomem *)TX4939_RTC_REG) +#define tx4939_cryptoptr \ + ((struct tx4939_crypto_reg __iomem *)TX4939_CRYPTO_REG) +#define tx4939_vpcptr ((struct tx4939_vpc_reg __iomem *)TX4939_VPC_REG) + +#define TX4939_REV_MAJ_MIN() \ + ((__u32)__raw_readq(&tx4939_ccfgptr->crir) & 0x00ff) +#define TX4939_REV_PCODE() \ + ((__u32)__raw_readq(&tx4939_ccfgptr->crir) >> 16) +#define TX4939_CCFG_BCFG() \ + ((__u32)((__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_BCFG_MASK) \ + >> 32)) + +#define tx4939_ccfg_clear(bits) tx4938_ccfg_clear(bits) +#define tx4939_ccfg_set(bits) tx4938_ccfg_set(bits) +#define tx4939_ccfg_change(change, new) tx4938_ccfg_change(change, new) + +#define TX4939_EBUSC_CR(ch) TX4927_EBUSC_CR(ch) +#define TX4939_EBUSC_BA(ch) TX4927_EBUSC_BA(ch) +#define TX4939_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch) +#define TX4939_EBUSC_WIDTH(ch) \ + (16 >> ((__u32)(TX4939_EBUSC_CR(ch) >> 20) & 0x1)) + +/* SCLK0 = MSTCLK * 429/19 * 16/245 / 2 (14.745MHz for MST 20MHz) */ +#define TX4939_SCLK0(mst) \ + ((((mst) + 245/2) / 245UL * 429 * 16 + 19) / 19 / 2) + +void tx4939_wdt_init(void); +void tx4939_add_memory_regions(void); +void tx4939_setup(void); +void tx4939_time_init(unsigned int tmrnr); +void tx4939_sio_init(unsigned int sclk, unsigned int cts_mask); +void tx4939_spi_init(int busid); +void tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1); +int tx4939_report_pciclk(void); +void tx4939_report_pci1clk(void); +struct pci_dev; +int tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot); +int tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +void tx4939_setup_pcierr_irq(void); +void tx4939_irq_init(void); +int tx4939_irq(void); +void tx4939_mtd_init(int ch); + +#endif /* __ASM_TXX9_TX4939_H */ diff --git a/arch/mips/include/asm/txx9irq.h b/arch/mips/include/asm/txx9irq.h new file mode 100644 index 000000000000..5620879be37f --- /dev/null +++ b/arch/mips/include/asm/txx9irq.h @@ -0,0 +1,34 @@ +/* + * include/asm-mips/txx9irq.h + * TX39/TX49 interrupt controller definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9IRQ_H +#define __ASM_TXX9IRQ_H + +#include + +#ifdef CONFIG_IRQ_CPU +#define TXX9_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) +#else +#ifdef CONFIG_I8259 +#define TXX9_IRQ_BASE (I8259A_IRQ_BASE + 16) +#else +#define TXX9_IRQ_BASE 0 +#endif +#endif + +#ifdef CONFIG_CPU_TX39XX +#define TXx9_MAX_IR 16 +#else +#define TXx9_MAX_IR 32 +#endif + +void txx9_irq_init(unsigned long baseaddr); +int txx9_irq(void); +int txx9_irq_set_pri(int irc_irq, int new_pri); + +#endif /* __ASM_TXX9IRQ_H */ diff --git a/arch/mips/include/asm/txx9pio.h b/arch/mips/include/asm/txx9pio.h new file mode 100644 index 000000000000..3d6fa9f8d513 --- /dev/null +++ b/arch/mips/include/asm/txx9pio.h @@ -0,0 +1,29 @@ +/* + * include/asm-mips/txx9pio.h + * TX39/TX49 PIO controller definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9PIO_H +#define __ASM_TXX9PIO_H + +#include + +struct txx9_pio_reg { + __u32 dout; + __u32 din; + __u32 dir; + __u32 od; + __u32 flag[2]; + __u32 pol; + __u32 intc; + __u32 maskcpu; + __u32 maskext; +}; + +int txx9_gpio_init(unsigned long baseaddr, + unsigned int base, unsigned int num); + +#endif /* __ASM_TXX9PIO_H */ diff --git a/arch/mips/include/asm/txx9tmr.h b/arch/mips/include/asm/txx9tmr.h new file mode 100644 index 000000000000..67f70a8f09bd --- /dev/null +++ b/arch/mips/include/asm/txx9tmr.h @@ -0,0 +1,67 @@ +/* + * include/asm-mips/txx9tmr.h + * TX39/TX49 timer controller definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9TMR_H +#define __ASM_TXX9TMR_H + +#include + +struct txx9_tmr_reg { + u32 tcr; + u32 tisr; + u32 cpra; + u32 cprb; + u32 itmr; + u32 unused0[3]; + u32 ccdr; + u32 unused1[3]; + u32 pgmr; + u32 unused2[3]; + u32 wtmr; + u32 unused3[43]; + u32 trr; +}; + +/* TMTCR : Timer Control */ +#define TXx9_TMTCR_TCE 0x00000080 +#define TXx9_TMTCR_CCDE 0x00000040 +#define TXx9_TMTCR_CRE 0x00000020 +#define TXx9_TMTCR_ECES 0x00000008 +#define TXx9_TMTCR_CCS 0x00000004 +#define TXx9_TMTCR_TMODE_MASK 0x00000003 +#define TXx9_TMTCR_TMODE_ITVL 0x00000000 +#define TXx9_TMTCR_TMODE_PGEN 0x00000001 +#define TXx9_TMTCR_TMODE_WDOG 0x00000002 + +/* TMTISR : Timer Int. Status */ +#define TXx9_TMTISR_TPIBS 0x00000004 +#define TXx9_TMTISR_TPIAS 0x00000002 +#define TXx9_TMTISR_TIIS 0x00000001 + +/* TMITMR : Interval Timer Mode */ +#define TXx9_TMITMR_TIIE 0x00008000 +#define TXx9_TMITMR_TZCE 0x00000001 + +/* TMWTMR : Watchdog Timer Mode */ +#define TXx9_TMWTMR_TWIE 0x00008000 +#define TXx9_TMWTMR_WDIS 0x00000080 +#define TXx9_TMWTMR_TWC 0x00000001 + +void txx9_clocksource_init(unsigned long baseaddr, + unsigned int imbusclk); +void txx9_clockevent_init(unsigned long baseaddr, int irq, + unsigned int imbusclk); +void txx9_tmr_init(unsigned long baseaddr); + +#ifdef CONFIG_CPU_TX39XX +#define TXX9_TIMER_BITS 24 +#else +#define TXX9_TIMER_BITS 32 +#endif + +#endif /* __ASM_TXX9TMR_H */ diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h new file mode 100644 index 000000000000..bcbb8d675af5 --- /dev/null +++ b/arch/mips/include/asm/types.h @@ -0,0 +1,54 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef _ASM_TYPES_H +#define _ASM_TYPES_H + +#if _MIPS_SZLONG == 64 +# include +#else +# include +#endif + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG _MIPS_SZLONG + +#ifndef __ASSEMBLY__ + +#if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \ + || defined(CONFIG_64BIT) +typedef u64 dma_addr_t; +#else +typedef u32 dma_addr_t; +#endif +typedef u64 dma64_addr_t; + +/* + * Don't use phys_t. You've been warned. + */ +#ifdef CONFIG_64BIT_PHYS_ADDR +typedef unsigned long long phys_t; +#else +typedef unsigned long phys_t; +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_TYPES_H */ diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h new file mode 100644 index 000000000000..b895144d577a --- /dev/null +++ b/arch/mips/include/asm/uaccess.h @@ -0,0 +1,852 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 1998, 1999, 2000, 03, 04 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki + */ +#ifndef _ASM_UACCESS_H +#define _ASM_UACCESS_H + +#include +#include +#include +#include + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ +#ifdef CONFIG_32BIT + +#define __UA_LIMIT 0x80000000UL + +#define __UA_ADDR ".word" +#define __UA_LA "la" +#define __UA_ADDU "addu" +#define __UA_t0 "$8" +#define __UA_t1 "$9" + +#endif /* CONFIG_32BIT */ + +#ifdef CONFIG_64BIT + +#define __UA_LIMIT (- TASK_SIZE) + +#define __UA_ADDR ".dword" +#define __UA_LA "dla" +#define __UA_ADDU "daddu" +#define __UA_t0 "$12" +#define __UA_t1 "$13" + +#endif /* CONFIG_64BIT */ + +/* + * USER_DS is a bitmask that has the bits set that may not be set in a valid + * userspace address. Note that we limit 32-bit userspace to 0x7fff8000 but + * the arithmetic we're doing only works if the limit is a power of two, so + * we use 0x80000000 here on 32-bit kernels. If a process passes an invalid + * address in this range it's the process's problem, not ours :-) + */ + +#define KERNEL_DS ((mm_segment_t) { 0UL }) +#define USER_DS ((mm_segment_t) { __UA_LIMIT }) + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#define segment_eq(a, b) ((a).seg == (b).seg) + + +/* + * Is a address valid? This does a straighforward calculation rather + * than tests. + * + * Address valid if: + * - "addr" doesn't have any high-bits set + * - AND "size" doesn't have any high-bits set + * - AND "addr+size" doesn't have any high-bits set + * - OR we are in kernel mode. + * + * __ua_size() is a trick to avoid runtime checking of positive constant + * sizes; for those we already know at compile time that the size is ok. + */ +#define __ua_size(size) \ + ((__builtin_constant_p(size) && (signed long) (size) > 0) ? 0 : (size)) + +/* + * access_ok: - Checks if a user space pointer is valid + * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that + * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe + * to write to a block, it is always safe to read from it. + * @addr: User space pointer to start of block to check + * @size: Size of block to check + * + * Context: User context only. This function may sleep. + * + * Checks if a pointer to a block of memory in user space is valid. + * + * Returns true (nonzero) if the memory block may be valid, false (zero) + * if it is definitely invalid. + * + * Note that, depending on architecture, this function probably just + * checks that the pointer is in the user space range - after calling + * this function, memory access functions may still return -EFAULT. + */ + +#define __access_mask get_fs().seg + +#define __access_ok(addr, size, mask) \ + (((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0) + +#define access_ok(type, addr, size) \ + likely(__access_ok((unsigned long)(addr), (size), __access_mask)) + +/* + * put_user: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ +#define put_user(x,ptr) \ + __put_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * get_user: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define get_user(x,ptr) \ + __get_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * __put_user: - Write a simple value into user space, with less checking. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + */ +#define __put_user(x,ptr) \ + __put_user_nocheck((x), (ptr), sizeof(*(ptr))) + +/* + * __get_user: - Get a simple variable from user space, with less checking. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define __get_user(x,ptr) \ + __get_user_nocheck((x), (ptr), sizeof(*(ptr))) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct __user *)(x)) + +/* + * Yuck. We need two variants, one for 64bit operation and one + * for 32 bit mode and old iron. + */ +#ifdef CONFIG_32BIT +#define __GET_USER_DW(val, ptr) __get_user_asm_ll32(val, ptr) +#endif +#ifdef CONFIG_64BIT +#define __GET_USER_DW(val, ptr) __get_user_asm(val, "ld", ptr) +#endif + +extern void __get_user_unknown(void); + +#define __get_user_common(val, size, ptr) \ +do { \ + switch (size) { \ + case 1: __get_user_asm(val, "lb", ptr); break; \ + case 2: __get_user_asm(val, "lh", ptr); break; \ + case 4: __get_user_asm(val, "lw", ptr); break; \ + case 8: __GET_USER_DW(val, ptr); break; \ + default: __get_user_unknown(); break; \ + } \ +} while (0) + +#define __get_user_nocheck(x, ptr, size) \ +({ \ + int __gu_err; \ + \ + __get_user_common((x), size, ptr); \ + __gu_err; \ +}) + +#define __get_user_check(x, ptr, size) \ +({ \ + int __gu_err = -EFAULT; \ + const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \ + \ + if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \ + __get_user_common((x), size, __gu_ptr); \ + \ + __gu_err; \ +}) + +#define __get_user_asm(val, insn, addr) \ +{ \ + long __gu_tmp; \ + \ + __asm__ __volatile__( \ + "1: " insn " %1, %3 \n" \ + "2: \n" \ + " .section .fixup,\"ax\" \n" \ + "3: li %0, %4 \n" \ + " j 2b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " "__UA_ADDR "\t1b, 3b \n" \ + " .previous \n" \ + : "=r" (__gu_err), "=r" (__gu_tmp) \ + : "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \ + \ + (val) = (__typeof__(*(addr))) __gu_tmp; \ +} + +/* + * Get a long long 64 using 32 bit registers. + */ +#define __get_user_asm_ll32(val, addr) \ +{ \ + union { \ + unsigned long long l; \ + __typeof__(*(addr)) t; \ + } __gu_tmp; \ + \ + __asm__ __volatile__( \ + "1: lw %1, (%3) \n" \ + "2: lw %D1, 4(%3) \n" \ + "3: .section .fixup,\"ax\" \n" \ + "4: li %0, %4 \n" \ + " move %1, $0 \n" \ + " move %D1, $0 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " " __UA_ADDR " 1b, 4b \n" \ + " " __UA_ADDR " 2b, 4b \n" \ + " .previous \n" \ + : "=r" (__gu_err), "=&r" (__gu_tmp.l) \ + : "0" (0), "r" (addr), "i" (-EFAULT)); \ + \ + (val) = __gu_tmp.t; \ +} + +/* + * Yuck. We need two variants, one for 64bit operation and one + * for 32 bit mode and old iron. + */ +#ifdef CONFIG_32BIT +#define __PUT_USER_DW(ptr) __put_user_asm_ll32(ptr) +#endif +#ifdef CONFIG_64BIT +#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr) +#endif + +#define __put_user_nocheck(x, ptr, size) \ +({ \ + __typeof__(*(ptr)) __pu_val; \ + int __pu_err = 0; \ + \ + __pu_val = (x); \ + switch (size) { \ + case 1: __put_user_asm("sb", ptr); break; \ + case 2: __put_user_asm("sh", ptr); break; \ + case 4: __put_user_asm("sw", ptr); break; \ + case 8: __PUT_USER_DW(ptr); break; \ + default: __put_user_unknown(); break; \ + } \ + __pu_err; \ +}) + +#define __put_user_check(x, ptr, size) \ +({ \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + int __pu_err = -EFAULT; \ + \ + if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \ + switch (size) { \ + case 1: __put_user_asm("sb", __pu_addr); break; \ + case 2: __put_user_asm("sh", __pu_addr); break; \ + case 4: __put_user_asm("sw", __pu_addr); break; \ + case 8: __PUT_USER_DW(__pu_addr); break; \ + default: __put_user_unknown(); break; \ + } \ + } \ + __pu_err; \ +}) + +#define __put_user_asm(insn, ptr) \ +{ \ + __asm__ __volatile__( \ + "1: " insn " %z2, %3 # __put_user_asm\n" \ + "2: \n" \ + " .section .fixup,\"ax\" \n" \ + "3: li %0, %4 \n" \ + " j 2b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " " __UA_ADDR " 1b, 3b \n" \ + " .previous \n" \ + : "=r" (__pu_err) \ + : "0" (0), "Jr" (__pu_val), "o" (__m(ptr)), \ + "i" (-EFAULT)); \ +} + +#define __put_user_asm_ll32(ptr) \ +{ \ + __asm__ __volatile__( \ + "1: sw %2, (%3) # __put_user_asm_ll32 \n" \ + "2: sw %D2, 4(%3) \n" \ + "3: \n" \ + " .section .fixup,\"ax\" \n" \ + "4: li %0, %4 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " " __UA_ADDR " 1b, 4b \n" \ + " " __UA_ADDR " 2b, 4b \n" \ + " .previous" \ + : "=r" (__pu_err) \ + : "0" (0), "r" (__pu_val), "r" (ptr), \ + "i" (-EFAULT)); \ +} + +extern void __put_user_unknown(void); + +/* + * We're generating jump to subroutines which will be outside the range of + * jump instructions + */ +#ifdef MODULE +#define __MODULE_JAL(destination) \ + ".set\tnoat\n\t" \ + __UA_LA "\t$1, " #destination "\n\t" \ + "jalr\t$1\n\t" \ + ".set\tat\n\t" +#else +#define __MODULE_JAL(destination) \ + "jal\t" #destination "\n\t" +#endif + +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS +#define DADDI_SCRATCH "$0" +#else +#define DADDI_SCRATCH "$3" +#endif + +extern size_t __copy_user(void *__to, const void *__from, size_t __n); + +#define __invoke_copy_to_user(to, from, n) \ +({ \ + register void __user *__cu_to_r __asm__("$4"); \ + register const void *__cu_from_r __asm__("$5"); \ + register long __cu_len_r __asm__("$6"); \ + \ + __cu_to_r = (to); \ + __cu_from_r = (from); \ + __cu_len_r = (n); \ + __asm__ __volatile__( \ + __MODULE_JAL(__copy_user) \ + : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ + : \ + : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ + DADDI_SCRATCH, "memory"); \ + __cu_len_r; \ +}) + +/* + * __copy_to_user: - Copy a block of data into user space, with less checking. + * @to: Destination address, in user space. + * @from: Source address, in kernel space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from kernel space to user space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + */ +#define __copy_to_user(to, from, n) \ +({ \ + void __user *__cu_to; \ + const void *__cu_from; \ + long __cu_len; \ + \ + might_sleep(); \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ + __cu_len; \ +}) + +extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); + +#define __copy_to_user_inatomic(to, from, n) \ +({ \ + void __user *__cu_to; \ + const void *__cu_from; \ + long __cu_len; \ + \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ + __cu_len; \ +}) + +#define __copy_from_user_inatomic(to, from, n) \ +({ \ + void *__cu_to; \ + const void __user *__cu_from; \ + long __cu_len; \ + \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + __cu_len = __invoke_copy_from_user_inatomic(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) + +/* + * copy_to_user: - Copy a block of data into user space. + * @to: Destination address, in user space. + * @from: Source address, in kernel space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from kernel space to user space. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + */ +#define copy_to_user(to, from, n) \ +({ \ + void __user *__cu_to; \ + const void *__cu_from; \ + long __cu_len; \ + \ + might_sleep(); \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) \ + __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) + +#define __invoke_copy_from_user(to, from, n) \ +({ \ + register void *__cu_to_r __asm__("$4"); \ + register const void __user *__cu_from_r __asm__("$5"); \ + register long __cu_len_r __asm__("$6"); \ + \ + __cu_to_r = (to); \ + __cu_from_r = (from); \ + __cu_len_r = (n); \ + __asm__ __volatile__( \ + ".set\tnoreorder\n\t" \ + __MODULE_JAL(__copy_user) \ + ".set\tnoat\n\t" \ + __UA_ADDU "\t$1, %1, %2\n\t" \ + ".set\tat\n\t" \ + ".set\treorder" \ + : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ + : \ + : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ + DADDI_SCRATCH, "memory"); \ + __cu_len_r; \ +}) + +#define __invoke_copy_from_user_inatomic(to, from, n) \ +({ \ + register void *__cu_to_r __asm__("$4"); \ + register const void __user *__cu_from_r __asm__("$5"); \ + register long __cu_len_r __asm__("$6"); \ + \ + __cu_to_r = (to); \ + __cu_from_r = (from); \ + __cu_len_r = (n); \ + __asm__ __volatile__( \ + ".set\tnoreorder\n\t" \ + __MODULE_JAL(__copy_user_inatomic) \ + ".set\tnoat\n\t" \ + __UA_ADDU "\t$1, %1, %2\n\t" \ + ".set\tat\n\t" \ + ".set\treorder" \ + : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ + : \ + : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ + DADDI_SCRATCH, "memory"); \ + __cu_len_r; \ +}) + +/* + * __copy_from_user: - Copy a block of data from user space, with less checking. + * @to: Destination address, in kernel space. + * @from: Source address, in user space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from user space to kernel space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + * + * If some data could not be copied, this function will pad the copied + * data to the requested size using zero bytes. + */ +#define __copy_from_user(to, from, n) \ +({ \ + void *__cu_to; \ + const void __user *__cu_from; \ + long __cu_len; \ + \ + might_sleep(); \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) + +/* + * copy_from_user: - Copy a block of data from user space. + * @to: Destination address, in kernel space. + * @from: Source address, in user space. + * @n: Number of bytes to copy. + * + * Context: User context only. This function may sleep. + * + * Copy data from user space to kernel space. + * + * Returns number of bytes that could not be copied. + * On success, this will be zero. + * + * If some data could not be copied, this function will pad the copied + * data to the requested size using zero bytes. + */ +#define copy_from_user(to, from, n) \ +({ \ + void *__cu_to; \ + const void __user *__cu_from; \ + long __cu_len; \ + \ + might_sleep(); \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + if (access_ok(VERIFY_READ, __cu_from, __cu_len)) \ + __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) + +#define __copy_in_user(to, from, n) __copy_from_user(to, from, n) + +#define copy_in_user(to, from, n) \ +({ \ + void __user *__cu_to; \ + const void __user *__cu_from; \ + long __cu_len; \ + \ + might_sleep(); \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) && \ + access_ok(VERIFY_WRITE, __cu_to, __cu_len))) \ + __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) + +/* + * __clear_user: - Zero a block of memory in user space, with less checking. + * @to: Destination address, in user space. + * @n: Number of bytes to zero. + * + * Zero a block of memory in user space. Caller must check + * the specified block with access_ok() before calling this function. + * + * Returns number of bytes that could not be cleared. + * On success, this will be zero. + */ +static inline __kernel_size_t +__clear_user(void __user *addr, __kernel_size_t size) +{ + __kernel_size_t res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, $0\n\t" + "move\t$6, %2\n\t" + __MODULE_JAL(__bzero) + "move\t%0, $6" + : "=r" (res) + : "r" (addr), "r" (size) + : "$4", "$5", "$6", __UA_t0, __UA_t1, "$31"); + + return res; +} + +#define clear_user(addr,n) \ +({ \ + void __user * __cl_addr = (addr); \ + unsigned long __cl_size = (n); \ + if (__cl_size && access_ok(VERIFY_WRITE, \ + ((unsigned long)(__cl_addr)), __cl_size)) \ + __cl_size = __clear_user(__cl_addr, __cl_size); \ + __cl_size; \ +}) + +/* + * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking. + * @dst: Destination address, in kernel space. This buffer must be at + * least @count bytes long. + * @src: Source address, in user space. + * @count: Maximum number of bytes to copy, including the trailing NUL. + * + * Copies a NUL-terminated string from userspace to kernel space. + * Caller must check the specified block with access_ok() before calling + * this function. + * + * On success, returns the length of the string (not including the trailing + * NUL). + * + * If access to userspace fails, returns -EFAULT (some data may have been + * copied). + * + * If @count is smaller than the length of the string, copies @count bytes + * and returns @count. + */ +static inline long +__strncpy_from_user(char *__to, const char __user *__from, long __len) +{ + long res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, %2\n\t" + "move\t$6, %3\n\t" + __MODULE_JAL(__strncpy_from_user_nocheck_asm) + "move\t%0, $2" + : "=r" (res) + : "r" (__to), "r" (__from), "r" (__len) + : "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory"); + + return res; +} + +/* + * strncpy_from_user: - Copy a NUL terminated string from userspace. + * @dst: Destination address, in kernel space. This buffer must be at + * least @count bytes long. + * @src: Source address, in user space. + * @count: Maximum number of bytes to copy, including the trailing NUL. + * + * Copies a NUL-terminated string from userspace to kernel space. + * + * On success, returns the length of the string (not including the trailing + * NUL). + * + * If access to userspace fails, returns -EFAULT (some data may have been + * copied). + * + * If @count is smaller than the length of the string, copies @count bytes + * and returns @count. + */ +static inline long +strncpy_from_user(char *__to, const char __user *__from, long __len) +{ + long res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, %2\n\t" + "move\t$6, %3\n\t" + __MODULE_JAL(__strncpy_from_user_asm) + "move\t%0, $2" + : "=r" (res) + : "r" (__to), "r" (__from), "r" (__len) + : "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory"); + + return res; +} + +/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ +static inline long __strlen_user(const char __user *s) +{ + long res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + __MODULE_JAL(__strlen_user_nocheck_asm) + "move\t%0, $2" + : "=r" (res) + : "r" (s) + : "$2", "$4", __UA_t0, "$31"); + + return res; +} + +/* + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +static inline long strlen_user(const char __user *s) +{ + long res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + __MODULE_JAL(__strlen_user_asm) + "move\t%0, $2" + : "=r" (res) + : "r" (s) + : "$2", "$4", __UA_t0, "$31"); + + return res; +} + +/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ +static inline long __strnlen_user(const char __user *s, long n) +{ + long res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, %2\n\t" + __MODULE_JAL(__strnlen_user_nocheck_asm) + "move\t%0, $2" + : "=r" (res) + : "r" (s), "r" (n) + : "$2", "$4", "$5", __UA_t0, "$31"); + + return res; +} + +/* + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +static inline long strnlen_user(const char __user *s, long n) +{ + long res; + + might_sleep(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, %2\n\t" + __MODULE_JAL(__strnlen_user_asm) + "move\t%0, $2" + : "=r" (res) + : "r" (s), "r" (n) + : "$2", "$4", "$5", __UA_t0, "$31"); + + return res; +} + +struct exception_table_entry +{ + unsigned long insn; + unsigned long nextinsn; +}; + +extern int fixup_exception(struct pt_regs *regs); + +#endif /* _ASM_UACCESS_H */ diff --git a/arch/mips/include/asm/ucontext.h b/arch/mips/include/asm/ucontext.h new file mode 100644 index 000000000000..8a4b20e88b81 --- /dev/null +++ b/arch/mips/include/asm/ucontext.h @@ -0,0 +1,21 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Low level exception handling + * + * Copyright (C) 1998, 1999 by Ralf Baechle + */ +#ifndef _ASM_UCONTEXT_H +#define _ASM_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* _ASM_UCONTEXT_H */ diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h new file mode 100644 index 000000000000..792404948571 --- /dev/null +++ b/arch/mips/include/asm/unaligned.h @@ -0,0 +1,28 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef _ASM_MIPS_UNALIGNED_H +#define _ASM_MIPS_UNALIGNED_H + +#include +#if defined(__MIPSEB__) +# include +# include +# include +# define get_unaligned __get_unaligned_be +# define put_unaligned __put_unaligned_be +#elif defined(__MIPSEL__) +# include +# include +# include +# define get_unaligned __get_unaligned_le +# define put_unaligned __put_unaligned_le +#else +# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???" +#endif + +#endif /* _ASM_MIPS_UNALIGNED_H */ diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h new file mode 100644 index 000000000000..a73e1531e151 --- /dev/null +++ b/arch/mips/include/asm/unistd.h @@ -0,0 +1,1037 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 97, 98, 99, 2000 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * + * Changed system calls macros _syscall5 - _syscall7 to push args 5 to 7 onto + * the stack. Robin Farine for ACN S.A, Copyright (C) 1996 by ACN S.A + */ +#ifndef _ASM_UNISTD_H +#define _ASM_UNISTD_H + +#include + +#if _MIPS_SIM == _MIPS_SIM_ABI32 + +/* + * Linux o32 style syscalls are in the range from 4000 to 4999. + */ +#define __NR_Linux 4000 +#define __NR_syscall (__NR_Linux + 0) +#define __NR_exit (__NR_Linux + 1) +#define __NR_fork (__NR_Linux + 2) +#define __NR_read (__NR_Linux + 3) +#define __NR_write (__NR_Linux + 4) +#define __NR_open (__NR_Linux + 5) +#define __NR_close (__NR_Linux + 6) +#define __NR_waitpid (__NR_Linux + 7) +#define __NR_creat (__NR_Linux + 8) +#define __NR_link (__NR_Linux + 9) +#define __NR_unlink (__NR_Linux + 10) +#define __NR_execve (__NR_Linux + 11) +#define __NR_chdir (__NR_Linux + 12) +#define __NR_time (__NR_Linux + 13) +#define __NR_mknod (__NR_Linux + 14) +#define __NR_chmod (__NR_Linux + 15) +#define __NR_lchown (__NR_Linux + 16) +#define __NR_break (__NR_Linux + 17) +#define __NR_unused18 (__NR_Linux + 18) +#define __NR_lseek (__NR_Linux + 19) +#define __NR_getpid (__NR_Linux + 20) +#define __NR_mount (__NR_Linux + 21) +#define __NR_umount (__NR_Linux + 22) +#define __NR_setuid (__NR_Linux + 23) +#define __NR_getuid (__NR_Linux + 24) +#define __NR_stime (__NR_Linux + 25) +#define __NR_ptrace (__NR_Linux + 26) +#define __NR_alarm (__NR_Linux + 27) +#define __NR_unused28 (__NR_Linux + 28) +#define __NR_pause (__NR_Linux + 29) +#define __NR_utime (__NR_Linux + 30) +#define __NR_stty (__NR_Linux + 31) +#define __NR_gtty (__NR_Linux + 32) +#define __NR_access (__NR_Linux + 33) +#define __NR_nice (__NR_Linux + 34) +#define __NR_ftime (__NR_Linux + 35) +#define __NR_sync (__NR_Linux + 36) +#define __NR_kill (__NR_Linux + 37) +#define __NR_rename (__NR_Linux + 38) +#define __NR_mkdir (__NR_Linux + 39) +#define __NR_rmdir (__NR_Linux + 40) +#define __NR_dup (__NR_Linux + 41) +#define __NR_pipe (__NR_Linux + 42) +#define __NR_times (__NR_Linux + 43) +#define __NR_prof (__NR_Linux + 44) +#define __NR_brk (__NR_Linux + 45) +#define __NR_setgid (__NR_Linux + 46) +#define __NR_getgid (__NR_Linux + 47) +#define __NR_signal (__NR_Linux + 48) +#define __NR_geteuid (__NR_Linux + 49) +#define __NR_getegid (__NR_Linux + 50) +#define __NR_acct (__NR_Linux + 51) +#define __NR_umount2 (__NR_Linux + 52) +#define __NR_lock (__NR_Linux + 53) +#define __NR_ioctl (__NR_Linux + 54) +#define __NR_fcntl (__NR_Linux + 55) +#define __NR_mpx (__NR_Linux + 56) +#define __NR_setpgid (__NR_Linux + 57) +#define __NR_ulimit (__NR_Linux + 58) +#define __NR_unused59 (__NR_Linux + 59) +#define __NR_umask (__NR_Linux + 60) +#define __NR_chroot (__NR_Linux + 61) +#define __NR_ustat (__NR_Linux + 62) +#define __NR_dup2 (__NR_Linux + 63) +#define __NR_getppid (__NR_Linux + 64) +#define __NR_getpgrp (__NR_Linux + 65) +#define __NR_setsid (__NR_Linux + 66) +#define __NR_sigaction (__NR_Linux + 67) +#define __NR_sgetmask (__NR_Linux + 68) +#define __NR_ssetmask (__NR_Linux + 69) +#define __NR_setreuid (__NR_Linux + 70) +#define __NR_setregid (__NR_Linux + 71) +#define __NR_sigsuspend (__NR_Linux + 72) +#define __NR_sigpending (__NR_Linux + 73) +#define __NR_sethostname (__NR_Linux + 74) +#define __NR_setrlimit (__NR_Linux + 75) +#define __NR_getrlimit (__NR_Linux + 76) +#define __NR_getrusage (__NR_Linux + 77) +#define __NR_gettimeofday (__NR_Linux + 78) +#define __NR_settimeofday (__NR_Linux + 79) +#define __NR_getgroups (__NR_Linux + 80) +#define __NR_setgroups (__NR_Linux + 81) +#define __NR_reserved82 (__NR_Linux + 82) +#define __NR_symlink (__NR_Linux + 83) +#define __NR_unused84 (__NR_Linux + 84) +#define __NR_readlink (__NR_Linux + 85) +#define __NR_uselib (__NR_Linux + 86) +#define __NR_swapon (__NR_Linux + 87) +#define __NR_reboot (__NR_Linux + 88) +#define __NR_readdir (__NR_Linux + 89) +#define __NR_mmap (__NR_Linux + 90) +#define __NR_munmap (__NR_Linux + 91) +#define __NR_truncate (__NR_Linux + 92) +#define __NR_ftruncate (__NR_Linux + 93) +#define __NR_fchmod (__NR_Linux + 94) +#define __NR_fchown (__NR_Linux + 95) +#define __NR_getpriority (__NR_Linux + 96) +#define __NR_setpriority (__NR_Linux + 97) +#define __NR_profil (__NR_Linux + 98) +#define __NR_statfs (__NR_Linux + 99) +#define __NR_fstatfs (__NR_Linux + 100) +#define __NR_ioperm (__NR_Linux + 101) +#define __NR_socketcall (__NR_Linux + 102) +#define __NR_syslog (__NR_Linux + 103) +#define __NR_setitimer (__NR_Linux + 104) +#define __NR_getitimer (__NR_Linux + 105) +#define __NR_stat (__NR_Linux + 106) +#define __NR_lstat (__NR_Linux + 107) +#define __NR_fstat (__NR_Linux + 108) +#define __NR_unused109 (__NR_Linux + 109) +#define __NR_iopl (__NR_Linux + 110) +#define __NR_vhangup (__NR_Linux + 111) +#define __NR_idle (__NR_Linux + 112) +#define __NR_vm86 (__NR_Linux + 113) +#define __NR_wait4 (__NR_Linux + 114) +#define __NR_swapoff (__NR_Linux + 115) +#define __NR_sysinfo (__NR_Linux + 116) +#define __NR_ipc (__NR_Linux + 117) +#define __NR_fsync (__NR_Linux + 118) +#define __NR_sigreturn (__NR_Linux + 119) +#define __NR_clone (__NR_Linux + 120) +#define __NR_setdomainname (__NR_Linux + 121) +#define __NR_uname (__NR_Linux + 122) +#define __NR_modify_ldt (__NR_Linux + 123) +#define __NR_adjtimex (__NR_Linux + 124) +#define __NR_mprotect (__NR_Linux + 125) +#define __NR_sigprocmask (__NR_Linux + 126) +#define __NR_create_module (__NR_Linux + 127) +#define __NR_init_module (__NR_Linux + 128) +#define __NR_delete_module (__NR_Linux + 129) +#define __NR_get_kernel_syms (__NR_Linux + 130) +#define __NR_quotactl (__NR_Linux + 131) +#define __NR_getpgid (__NR_Linux + 132) +#define __NR_fchdir (__NR_Linux + 133) +#define __NR_bdflush (__NR_Linux + 134) +#define __NR_sysfs (__NR_Linux + 135) +#define __NR_personality (__NR_Linux + 136) +#define __NR_afs_syscall (__NR_Linux + 137) /* Syscall for Andrew File System */ +#define __NR_setfsuid (__NR_Linux + 138) +#define __NR_setfsgid (__NR_Linux + 139) +#define __NR__llseek (__NR_Linux + 140) +#define __NR_getdents (__NR_Linux + 141) +#define __NR__newselect (__NR_Linux + 142) +#define __NR_flock (__NR_Linux + 143) +#define __NR_msync (__NR_Linux + 144) +#define __NR_readv (__NR_Linux + 145) +#define __NR_writev (__NR_Linux + 146) +#define __NR_cacheflush (__NR_Linux + 147) +#define __NR_cachectl (__NR_Linux + 148) +#define __NR_sysmips (__NR_Linux + 149) +#define __NR_unused150 (__NR_Linux + 150) +#define __NR_getsid (__NR_Linux + 151) +#define __NR_fdatasync (__NR_Linux + 152) +#define __NR__sysctl (__NR_Linux + 153) +#define __NR_mlock (__NR_Linux + 154) +#define __NR_munlock (__NR_Linux + 155) +#define __NR_mlockall (__NR_Linux + 156) +#define __NR_munlockall (__NR_Linux + 157) +#define __NR_sched_setparam (__NR_Linux + 158) +#define __NR_sched_getparam (__NR_Linux + 159) +#define __NR_sched_setscheduler (__NR_Linux + 160) +#define __NR_sched_getscheduler (__NR_Linux + 161) +#define __NR_sched_yield (__NR_Linux + 162) +#define __NR_sched_get_priority_max (__NR_Linux + 163) +#define __NR_sched_get_priority_min (__NR_Linux + 164) +#define __NR_sched_rr_get_interval (__NR_Linux + 165) +#define __NR_nanosleep (__NR_Linux + 166) +#define __NR_mremap (__NR_Linux + 167) +#define __NR_accept (__NR_Linux + 168) +#define __NR_bind (__NR_Linux + 169) +#define __NR_connect (__NR_Linux + 170) +#define __NR_getpeername (__NR_Linux + 171) +#define __NR_getsockname (__NR_Linux + 172) +#define __NR_getsockopt (__NR_Linux + 173) +#define __NR_listen (__NR_Linux + 174) +#define __NR_recv (__NR_Linux + 175) +#define __NR_recvfrom (__NR_Linux + 176) +#define __NR_recvmsg (__NR_Linux + 177) +#define __NR_send (__NR_Linux + 178) +#define __NR_sendmsg (__NR_Linux + 179) +#define __NR_sendto (__NR_Linux + 180) +#define __NR_setsockopt (__NR_Linux + 181) +#define __NR_shutdown (__NR_Linux + 182) +#define __NR_socket (__NR_Linux + 183) +#define __NR_socketpair (__NR_Linux + 184) +#define __NR_setresuid (__NR_Linux + 185) +#define __NR_getresuid (__NR_Linux + 186) +#define __NR_query_module (__NR_Linux + 187) +#define __NR_poll (__NR_Linux + 188) +#define __NR_nfsservctl (__NR_Linux + 189) +#define __NR_setresgid (__NR_Linux + 190) +#define __NR_getresgid (__NR_Linux + 191) +#define __NR_prctl (__NR_Linux + 192) +#define __NR_rt_sigreturn (__NR_Linux + 193) +#define __NR_rt_sigaction (__NR_Linux + 194) +#define __NR_rt_sigprocmask (__NR_Linux + 195) +#define __NR_rt_sigpending (__NR_Linux + 196) +#define __NR_rt_sigtimedwait (__NR_Linux + 197) +#define __NR_rt_sigqueueinfo (__NR_Linux + 198) +#define __NR_rt_sigsuspend (__NR_Linux + 199) +#define __NR_pread64 (__NR_Linux + 200) +#define __NR_pwrite64 (__NR_Linux + 201) +#define __NR_chown (__NR_Linux + 202) +#define __NR_getcwd (__NR_Linux + 203) +#define __NR_capget (__NR_Linux + 204) +#define __NR_capset (__NR_Linux + 205) +#define __NR_sigaltstack (__NR_Linux + 206) +#define __NR_sendfile (__NR_Linux + 207) +#define __NR_getpmsg (__NR_Linux + 208) +#define __NR_putpmsg (__NR_Linux + 209) +#define __NR_mmap2 (__NR_Linux + 210) +#define __NR_truncate64 (__NR_Linux + 211) +#define __NR_ftruncate64 (__NR_Linux + 212) +#define __NR_stat64 (__NR_Linux + 213) +#define __NR_lstat64 (__NR_Linux + 214) +#define __NR_fstat64 (__NR_Linux + 215) +#define __NR_pivot_root (__NR_Linux + 216) +#define __NR_mincore (__NR_Linux + 217) +#define __NR_madvise (__NR_Linux + 218) +#define __NR_getdents64 (__NR_Linux + 219) +#define __NR_fcntl64 (__NR_Linux + 220) +#define __NR_reserved221 (__NR_Linux + 221) +#define __NR_gettid (__NR_Linux + 222) +#define __NR_readahead (__NR_Linux + 223) +#define __NR_setxattr (__NR_Linux + 224) +#define __NR_lsetxattr (__NR_Linux + 225) +#define __NR_fsetxattr (__NR_Linux + 226) +#define __NR_getxattr (__NR_Linux + 227) +#define __NR_lgetxattr (__NR_Linux + 228) +#define __NR_fgetxattr (__NR_Linux + 229) +#define __NR_listxattr (__NR_Linux + 230) +#define __NR_llistxattr (__NR_Linux + 231) +#define __NR_flistxattr (__NR_Linux + 232) +#define __NR_removexattr (__NR_Linux + 233) +#define __NR_lremovexattr (__NR_Linux + 234) +#define __NR_fremovexattr (__NR_Linux + 235) +#define __NR_tkill (__NR_Linux + 236) +#define __NR_sendfile64 (__NR_Linux + 237) +#define __NR_futex (__NR_Linux + 238) +#define __NR_sched_setaffinity (__NR_Linux + 239) +#define __NR_sched_getaffinity (__NR_Linux + 240) +#define __NR_io_setup (__NR_Linux + 241) +#define __NR_io_destroy (__NR_Linux + 242) +#define __NR_io_getevents (__NR_Linux + 243) +#define __NR_io_submit (__NR_Linux + 244) +#define __NR_io_cancel (__NR_Linux + 245) +#define __NR_exit_group (__NR_Linux + 246) +#define __NR_lookup_dcookie (__NR_Linux + 247) +#define __NR_epoll_create (__NR_Linux + 248) +#define __NR_epoll_ctl (__NR_Linux + 249) +#define __NR_epoll_wait (__NR_Linux + 250) +#define __NR_remap_file_pages (__NR_Linux + 251) +#define __NR_set_tid_address (__NR_Linux + 252) +#define __NR_restart_syscall (__NR_Linux + 253) +#define __NR_fadvise64 (__NR_Linux + 254) +#define __NR_statfs64 (__NR_Linux + 255) +#define __NR_fstatfs64 (__NR_Linux + 256) +#define __NR_timer_create (__NR_Linux + 257) +#define __NR_timer_settime (__NR_Linux + 258) +#define __NR_timer_gettime (__NR_Linux + 259) +#define __NR_timer_getoverrun (__NR_Linux + 260) +#define __NR_timer_delete (__NR_Linux + 261) +#define __NR_clock_settime (__NR_Linux + 262) +#define __NR_clock_gettime (__NR_Linux + 263) +#define __NR_clock_getres (__NR_Linux + 264) +#define __NR_clock_nanosleep (__NR_Linux + 265) +#define __NR_tgkill (__NR_Linux + 266) +#define __NR_utimes (__NR_Linux + 267) +#define __NR_mbind (__NR_Linux + 268) +#define __NR_get_mempolicy (__NR_Linux + 269) +#define __NR_set_mempolicy (__NR_Linux + 270) +#define __NR_mq_open (__NR_Linux + 271) +#define __NR_mq_unlink (__NR_Linux + 272) +#define __NR_mq_timedsend (__NR_Linux + 273) +#define __NR_mq_timedreceive (__NR_Linux + 274) +#define __NR_mq_notify (__NR_Linux + 275) +#define __NR_mq_getsetattr (__NR_Linux + 276) +#define __NR_vserver (__NR_Linux + 277) +#define __NR_waitid (__NR_Linux + 278) +/* #define __NR_sys_setaltroot (__NR_Linux + 279) */ +#define __NR_add_key (__NR_Linux + 280) +#define __NR_request_key (__NR_Linux + 281) +#define __NR_keyctl (__NR_Linux + 282) +#define __NR_set_thread_area (__NR_Linux + 283) +#define __NR_inotify_init (__NR_Linux + 284) +#define __NR_inotify_add_watch (__NR_Linux + 285) +#define __NR_inotify_rm_watch (__NR_Linux + 286) +#define __NR_migrate_pages (__NR_Linux + 287) +#define __NR_openat (__NR_Linux + 288) +#define __NR_mkdirat (__NR_Linux + 289) +#define __NR_mknodat (__NR_Linux + 290) +#define __NR_fchownat (__NR_Linux + 291) +#define __NR_futimesat (__NR_Linux + 292) +#define __NR_fstatat64 (__NR_Linux + 293) +#define __NR_unlinkat (__NR_Linux + 294) +#define __NR_renameat (__NR_Linux + 295) +#define __NR_linkat (__NR_Linux + 296) +#define __NR_symlinkat (__NR_Linux + 297) +#define __NR_readlinkat (__NR_Linux + 298) +#define __NR_fchmodat (__NR_Linux + 299) +#define __NR_faccessat (__NR_Linux + 300) +#define __NR_pselect6 (__NR_Linux + 301) +#define __NR_ppoll (__NR_Linux + 302) +#define __NR_unshare (__NR_Linux + 303) +#define __NR_splice (__NR_Linux + 304) +#define __NR_sync_file_range (__NR_Linux + 305) +#define __NR_tee (__NR_Linux + 306) +#define __NR_vmsplice (__NR_Linux + 307) +#define __NR_move_pages (__NR_Linux + 308) +#define __NR_set_robust_list (__NR_Linux + 309) +#define __NR_get_robust_list (__NR_Linux + 310) +#define __NR_kexec_load (__NR_Linux + 311) +#define __NR_getcpu (__NR_Linux + 312) +#define __NR_epoll_pwait (__NR_Linux + 313) +#define __NR_ioprio_set (__NR_Linux + 314) +#define __NR_ioprio_get (__NR_Linux + 315) +#define __NR_utimensat (__NR_Linux + 316) +#define __NR_signalfd (__NR_Linux + 317) +#define __NR_timerfd (__NR_Linux + 318) +#define __NR_eventfd (__NR_Linux + 319) +#define __NR_fallocate (__NR_Linux + 320) +#define __NR_timerfd_create (__NR_Linux + 321) +#define __NR_timerfd_gettime (__NR_Linux + 322) +#define __NR_timerfd_settime (__NR_Linux + 323) +#define __NR_signalfd4 (__NR_Linux + 324) +#define __NR_eventfd2 (__NR_Linux + 325) +#define __NR_epoll_create1 (__NR_Linux + 326) +#define __NR_dup3 (__NR_Linux + 327) +#define __NR_pipe2 (__NR_Linux + 328) +#define __NR_inotify_init1 (__NR_Linux + 329) + +/* + * Offset of the last Linux o32 flavoured syscall + */ +#define __NR_Linux_syscalls 329 + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#define __NR_O32_Linux 4000 +#define __NR_O32_Linux_syscalls 329 + +#if _MIPS_SIM == _MIPS_SIM_ABI64 + +/* + * Linux 64-bit syscalls are in the range from 5000 to 5999. + */ +#define __NR_Linux 5000 +#define __NR_read (__NR_Linux + 0) +#define __NR_write (__NR_Linux + 1) +#define __NR_open (__NR_Linux + 2) +#define __NR_close (__NR_Linux + 3) +#define __NR_stat (__NR_Linux + 4) +#define __NR_fstat (__NR_Linux + 5) +#define __NR_lstat (__NR_Linux + 6) +#define __NR_poll (__NR_Linux + 7) +#define __NR_lseek (__NR_Linux + 8) +#define __NR_mmap (__NR_Linux + 9) +#define __NR_mprotect (__NR_Linux + 10) +#define __NR_munmap (__NR_Linux + 11) +#define __NR_brk (__NR_Linux + 12) +#define __NR_rt_sigaction (__NR_Linux + 13) +#define __NR_rt_sigprocmask (__NR_Linux + 14) +#define __NR_ioctl (__NR_Linux + 15) +#define __NR_pread64 (__NR_Linux + 16) +#define __NR_pwrite64 (__NR_Linux + 17) +#define __NR_readv (__NR_Linux + 18) +#define __NR_writev (__NR_Linux + 19) +#define __NR_access (__NR_Linux + 20) +#define __NR_pipe (__NR_Linux + 21) +#define __NR__newselect (__NR_Linux + 22) +#define __NR_sched_yield (__NR_Linux + 23) +#define __NR_mremap (__NR_Linux + 24) +#define __NR_msync (__NR_Linux + 25) +#define __NR_mincore (__NR_Linux + 26) +#define __NR_madvise (__NR_Linux + 27) +#define __NR_shmget (__NR_Linux + 28) +#define __NR_shmat (__NR_Linux + 29) +#define __NR_shmctl (__NR_Linux + 30) +#define __NR_dup (__NR_Linux + 31) +#define __NR_dup2 (__NR_Linux + 32) +#define __NR_pause (__NR_Linux + 33) +#define __NR_nanosleep (__NR_Linux + 34) +#define __NR_getitimer (__NR_Linux + 35) +#define __NR_setitimer (__NR_Linux + 36) +#define __NR_alarm (__NR_Linux + 37) +#define __NR_getpid (__NR_Linux + 38) +#define __NR_sendfile (__NR_Linux + 39) +#define __NR_socket (__NR_Linux + 40) +#define __NR_connect (__NR_Linux + 41) +#define __NR_accept (__NR_Linux + 42) +#define __NR_sendto (__NR_Linux + 43) +#define __NR_recvfrom (__NR_Linux + 44) +#define __NR_sendmsg (__NR_Linux + 45) +#define __NR_recvmsg (__NR_Linux + 46) +#define __NR_shutdown (__NR_Linux + 47) +#define __NR_bind (__NR_Linux + 48) +#define __NR_listen (__NR_Linux + 49) +#define __NR_getsockname (__NR_Linux + 50) +#define __NR_getpeername (__NR_Linux + 51) +#define __NR_socketpair (__NR_Linux + 52) +#define __NR_setsockopt (__NR_Linux + 53) +#define __NR_getsockopt (__NR_Linux + 54) +#define __NR_clone (__NR_Linux + 55) +#define __NR_fork (__NR_Linux + 56) +#define __NR_execve (__NR_Linux + 57) +#define __NR_exit (__NR_Linux + 58) +#define __NR_wait4 (__NR_Linux + 59) +#define __NR_kill (__NR_Linux + 60) +#define __NR_uname (__NR_Linux + 61) +#define __NR_semget (__NR_Linux + 62) +#define __NR_semop (__NR_Linux + 63) +#define __NR_semctl (__NR_Linux + 64) +#define __NR_shmdt (__NR_Linux + 65) +#define __NR_msgget (__NR_Linux + 66) +#define __NR_msgsnd (__NR_Linux + 67) +#define __NR_msgrcv (__NR_Linux + 68) +#define __NR_msgctl (__NR_Linux + 69) +#define __NR_fcntl (__NR_Linux + 70) +#define __NR_flock (__NR_Linux + 71) +#define __NR_fsync (__NR_Linux + 72) +#define __NR_fdatasync (__NR_Linux + 73) +#define __NR_truncate (__NR_Linux + 74) +#define __NR_ftruncate (__NR_Linux + 75) +#define __NR_getdents (__NR_Linux + 76) +#define __NR_getcwd (__NR_Linux + 77) +#define __NR_chdir (__NR_Linux + 78) +#define __NR_fchdir (__NR_Linux + 79) +#define __NR_rename (__NR_Linux + 80) +#define __NR_mkdir (__NR_Linux + 81) +#define __NR_rmdir (__NR_Linux + 82) +#define __NR_creat (__NR_Linux + 83) +#define __NR_link (__NR_Linux + 84) +#define __NR_unlink (__NR_Linux + 85) +#define __NR_symlink (__NR_Linux + 86) +#define __NR_readlink (__NR_Linux + 87) +#define __NR_chmod (__NR_Linux + 88) +#define __NR_fchmod (__NR_Linux + 89) +#define __NR_chown (__NR_Linux + 90) +#define __NR_fchown (__NR_Linux + 91) +#define __NR_lchown (__NR_Linux + 92) +#define __NR_umask (__NR_Linux + 93) +#define __NR_gettimeofday (__NR_Linux + 94) +#define __NR_getrlimit (__NR_Linux + 95) +#define __NR_getrusage (__NR_Linux + 96) +#define __NR_sysinfo (__NR_Linux + 97) +#define __NR_times (__NR_Linux + 98) +#define __NR_ptrace (__NR_Linux + 99) +#define __NR_getuid (__NR_Linux + 100) +#define __NR_syslog (__NR_Linux + 101) +#define __NR_getgid (__NR_Linux + 102) +#define __NR_setuid (__NR_Linux + 103) +#define __NR_setgid (__NR_Linux + 104) +#define __NR_geteuid (__NR_Linux + 105) +#define __NR_getegid (__NR_Linux + 106) +#define __NR_setpgid (__NR_Linux + 107) +#define __NR_getppid (__NR_Linux + 108) +#define __NR_getpgrp (__NR_Linux + 109) +#define __NR_setsid (__NR_Linux + 110) +#define __NR_setreuid (__NR_Linux + 111) +#define __NR_setregid (__NR_Linux + 112) +#define __NR_getgroups (__NR_Linux + 113) +#define __NR_setgroups (__NR_Linux + 114) +#define __NR_setresuid (__NR_Linux + 115) +#define __NR_getresuid (__NR_Linux + 116) +#define __NR_setresgid (__NR_Linux + 117) +#define __NR_getresgid (__NR_Linux + 118) +#define __NR_getpgid (__NR_Linux + 119) +#define __NR_setfsuid (__NR_Linux + 120) +#define __NR_setfsgid (__NR_Linux + 121) +#define __NR_getsid (__NR_Linux + 122) +#define __NR_capget (__NR_Linux + 123) +#define __NR_capset (__NR_Linux + 124) +#define __NR_rt_sigpending (__NR_Linux + 125) +#define __NR_rt_sigtimedwait (__NR_Linux + 126) +#define __NR_rt_sigqueueinfo (__NR_Linux + 127) +#define __NR_rt_sigsuspend (__NR_Linux + 128) +#define __NR_sigaltstack (__NR_Linux + 129) +#define __NR_utime (__NR_Linux + 130) +#define __NR_mknod (__NR_Linux + 131) +#define __NR_personality (__NR_Linux + 132) +#define __NR_ustat (__NR_Linux + 133) +#define __NR_statfs (__NR_Linux + 134) +#define __NR_fstatfs (__NR_Linux + 135) +#define __NR_sysfs (__NR_Linux + 136) +#define __NR_getpriority (__NR_Linux + 137) +#define __NR_setpriority (__NR_Linux + 138) +#define __NR_sched_setparam (__NR_Linux + 139) +#define __NR_sched_getparam (__NR_Linux + 140) +#define __NR_sched_setscheduler (__NR_Linux + 141) +#define __NR_sched_getscheduler (__NR_Linux + 142) +#define __NR_sched_get_priority_max (__NR_Linux + 143) +#define __NR_sched_get_priority_min (__NR_Linux + 144) +#define __NR_sched_rr_get_interval (__NR_Linux + 145) +#define __NR_mlock (__NR_Linux + 146) +#define __NR_munlock (__NR_Linux + 147) +#define __NR_mlockall (__NR_Linux + 148) +#define __NR_munlockall (__NR_Linux + 149) +#define __NR_vhangup (__NR_Linux + 150) +#define __NR_pivot_root (__NR_Linux + 151) +#define __NR__sysctl (__NR_Linux + 152) +#define __NR_prctl (__NR_Linux + 153) +#define __NR_adjtimex (__NR_Linux + 154) +#define __NR_setrlimit (__NR_Linux + 155) +#define __NR_chroot (__NR_Linux + 156) +#define __NR_sync (__NR_Linux + 157) +#define __NR_acct (__NR_Linux + 158) +#define __NR_settimeofday (__NR_Linux + 159) +#define __NR_mount (__NR_Linux + 160) +#define __NR_umount2 (__NR_Linux + 161) +#define __NR_swapon (__NR_Linux + 162) +#define __NR_swapoff (__NR_Linux + 163) +#define __NR_reboot (__NR_Linux + 164) +#define __NR_sethostname (__NR_Linux + 165) +#define __NR_setdomainname (__NR_Linux + 166) +#define __NR_create_module (__NR_Linux + 167) +#define __NR_init_module (__NR_Linux + 168) +#define __NR_delete_module (__NR_Linux + 169) +#define __NR_get_kernel_syms (__NR_Linux + 170) +#define __NR_query_module (__NR_Linux + 171) +#define __NR_quotactl (__NR_Linux + 172) +#define __NR_nfsservctl (__NR_Linux + 173) +#define __NR_getpmsg (__NR_Linux + 174) +#define __NR_putpmsg (__NR_Linux + 175) +#define __NR_afs_syscall (__NR_Linux + 176) +#define __NR_reserved177 (__NR_Linux + 177) +#define __NR_gettid (__NR_Linux + 178) +#define __NR_readahead (__NR_Linux + 179) +#define __NR_setxattr (__NR_Linux + 180) +#define __NR_lsetxattr (__NR_Linux + 181) +#define __NR_fsetxattr (__NR_Linux + 182) +#define __NR_getxattr (__NR_Linux + 183) +#define __NR_lgetxattr (__NR_Linux + 184) +#define __NR_fgetxattr (__NR_Linux + 185) +#define __NR_listxattr (__NR_Linux + 186) +#define __NR_llistxattr (__NR_Linux + 187) +#define __NR_flistxattr (__NR_Linux + 188) +#define __NR_removexattr (__NR_Linux + 189) +#define __NR_lremovexattr (__NR_Linux + 190) +#define __NR_fremovexattr (__NR_Linux + 191) +#define __NR_tkill (__NR_Linux + 192) +#define __NR_reserved193 (__NR_Linux + 193) +#define __NR_futex (__NR_Linux + 194) +#define __NR_sched_setaffinity (__NR_Linux + 195) +#define __NR_sched_getaffinity (__NR_Linux + 196) +#define __NR_cacheflush (__NR_Linux + 197) +#define __NR_cachectl (__NR_Linux + 198) +#define __NR_sysmips (__NR_Linux + 199) +#define __NR_io_setup (__NR_Linux + 200) +#define __NR_io_destroy (__NR_Linux + 201) +#define __NR_io_getevents (__NR_Linux + 202) +#define __NR_io_submit (__NR_Linux + 203) +#define __NR_io_cancel (__NR_Linux + 204) +#define __NR_exit_group (__NR_Linux + 205) +#define __NR_lookup_dcookie (__NR_Linux + 206) +#define __NR_epoll_create (__NR_Linux + 207) +#define __NR_epoll_ctl (__NR_Linux + 208) +#define __NR_epoll_wait (__NR_Linux + 209) +#define __NR_remap_file_pages (__NR_Linux + 210) +#define __NR_rt_sigreturn (__NR_Linux + 211) +#define __NR_set_tid_address (__NR_Linux + 212) +#define __NR_restart_syscall (__NR_Linux + 213) +#define __NR_semtimedop (__NR_Linux + 214) +#define __NR_fadvise64 (__NR_Linux + 215) +#define __NR_timer_create (__NR_Linux + 216) +#define __NR_timer_settime (__NR_Linux + 217) +#define __NR_timer_gettime (__NR_Linux + 218) +#define __NR_timer_getoverrun (__NR_Linux + 219) +#define __NR_timer_delete (__NR_Linux + 220) +#define __NR_clock_settime (__NR_Linux + 221) +#define __NR_clock_gettime (__NR_Linux + 222) +#define __NR_clock_getres (__NR_Linux + 223) +#define __NR_clock_nanosleep (__NR_Linux + 224) +#define __NR_tgkill (__NR_Linux + 225) +#define __NR_utimes (__NR_Linux + 226) +#define __NR_mbind (__NR_Linux + 227) +#define __NR_get_mempolicy (__NR_Linux + 228) +#define __NR_set_mempolicy (__NR_Linux + 229) +#define __NR_mq_open (__NR_Linux + 230) +#define __NR_mq_unlink (__NR_Linux + 231) +#define __NR_mq_timedsend (__NR_Linux + 232) +#define __NR_mq_timedreceive (__NR_Linux + 233) +#define __NR_mq_notify (__NR_Linux + 234) +#define __NR_mq_getsetattr (__NR_Linux + 235) +#define __NR_vserver (__NR_Linux + 236) +#define __NR_waitid (__NR_Linux + 237) +/* #define __NR_sys_setaltroot (__NR_Linux + 238) */ +#define __NR_add_key (__NR_Linux + 239) +#define __NR_request_key (__NR_Linux + 240) +#define __NR_keyctl (__NR_Linux + 241) +#define __NR_set_thread_area (__NR_Linux + 242) +#define __NR_inotify_init (__NR_Linux + 243) +#define __NR_inotify_add_watch (__NR_Linux + 244) +#define __NR_inotify_rm_watch (__NR_Linux + 245) +#define __NR_migrate_pages (__NR_Linux + 246) +#define __NR_openat (__NR_Linux + 247) +#define __NR_mkdirat (__NR_Linux + 248) +#define __NR_mknodat (__NR_Linux + 249) +#define __NR_fchownat (__NR_Linux + 250) +#define __NR_futimesat (__NR_Linux + 251) +#define __NR_newfstatat (__NR_Linux + 252) +#define __NR_unlinkat (__NR_Linux + 253) +#define __NR_renameat (__NR_Linux + 254) +#define __NR_linkat (__NR_Linux + 255) +#define __NR_symlinkat (__NR_Linux + 256) +#define __NR_readlinkat (__NR_Linux + 257) +#define __NR_fchmodat (__NR_Linux + 258) +#define __NR_faccessat (__NR_Linux + 259) +#define __NR_pselect6 (__NR_Linux + 260) +#define __NR_ppoll (__NR_Linux + 261) +#define __NR_unshare (__NR_Linux + 262) +#define __NR_splice (__NR_Linux + 263) +#define __NR_sync_file_range (__NR_Linux + 264) +#define __NR_tee (__NR_Linux + 265) +#define __NR_vmsplice (__NR_Linux + 266) +#define __NR_move_pages (__NR_Linux + 267) +#define __NR_set_robust_list (__NR_Linux + 268) +#define __NR_get_robust_list (__NR_Linux + 269) +#define __NR_kexec_load (__NR_Linux + 270) +#define __NR_getcpu (__NR_Linux + 271) +#define __NR_epoll_pwait (__NR_Linux + 272) +#define __NR_ioprio_set (__NR_Linux + 273) +#define __NR_ioprio_get (__NR_Linux + 274) +#define __NR_utimensat (__NR_Linux + 275) +#define __NR_signalfd (__NR_Linux + 276) +#define __NR_timerfd (__NR_Linux + 277) +#define __NR_eventfd (__NR_Linux + 278) +#define __NR_fallocate (__NR_Linux + 279) +#define __NR_timerfd_create (__NR_Linux + 280) +#define __NR_timerfd_gettime (__NR_Linux + 281) +#define __NR_timerfd_settime (__NR_Linux + 282) +#define __NR_signalfd4 (__NR_Linux + 283) +#define __NR_eventfd2 (__NR_Linux + 284) +#define __NR_epoll_create1 (__NR_Linux + 285) +#define __NR_dup3 (__NR_Linux + 286) +#define __NR_pipe2 (__NR_Linux + 287) +#define __NR_inotify_init1 (__NR_Linux + 288) + +/* + * Offset of the last Linux 64-bit flavoured syscall + */ +#define __NR_Linux_syscalls 288 + +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ + +#define __NR_64_Linux 5000 +#define __NR_64_Linux_syscalls 288 + +#if _MIPS_SIM == _MIPS_SIM_NABI32 + +/* + * Linux N32 syscalls are in the range from 6000 to 6999. + */ +#define __NR_Linux 6000 +#define __NR_read (__NR_Linux + 0) +#define __NR_write (__NR_Linux + 1) +#define __NR_open (__NR_Linux + 2) +#define __NR_close (__NR_Linux + 3) +#define __NR_stat (__NR_Linux + 4) +#define __NR_fstat (__NR_Linux + 5) +#define __NR_lstat (__NR_Linux + 6) +#define __NR_poll (__NR_Linux + 7) +#define __NR_lseek (__NR_Linux + 8) +#define __NR_mmap (__NR_Linux + 9) +#define __NR_mprotect (__NR_Linux + 10) +#define __NR_munmap (__NR_Linux + 11) +#define __NR_brk (__NR_Linux + 12) +#define __NR_rt_sigaction (__NR_Linux + 13) +#define __NR_rt_sigprocmask (__NR_Linux + 14) +#define __NR_ioctl (__NR_Linux + 15) +#define __NR_pread64 (__NR_Linux + 16) +#define __NR_pwrite64 (__NR_Linux + 17) +#define __NR_readv (__NR_Linux + 18) +#define __NR_writev (__NR_Linux + 19) +#define __NR_access (__NR_Linux + 20) +#define __NR_pipe (__NR_Linux + 21) +#define __NR__newselect (__NR_Linux + 22) +#define __NR_sched_yield (__NR_Linux + 23) +#define __NR_mremap (__NR_Linux + 24) +#define __NR_msync (__NR_Linux + 25) +#define __NR_mincore (__NR_Linux + 26) +#define __NR_madvise (__NR_Linux + 27) +#define __NR_shmget (__NR_Linux + 28) +#define __NR_shmat (__NR_Linux + 29) +#define __NR_shmctl (__NR_Linux + 30) +#define __NR_dup (__NR_Linux + 31) +#define __NR_dup2 (__NR_Linux + 32) +#define __NR_pause (__NR_Linux + 33) +#define __NR_nanosleep (__NR_Linux + 34) +#define __NR_getitimer (__NR_Linux + 35) +#define __NR_setitimer (__NR_Linux + 36) +#define __NR_alarm (__NR_Linux + 37) +#define __NR_getpid (__NR_Linux + 38) +#define __NR_sendfile (__NR_Linux + 39) +#define __NR_socket (__NR_Linux + 40) +#define __NR_connect (__NR_Linux + 41) +#define __NR_accept (__NR_Linux + 42) +#define __NR_sendto (__NR_Linux + 43) +#define __NR_recvfrom (__NR_Linux + 44) +#define __NR_sendmsg (__NR_Linux + 45) +#define __NR_recvmsg (__NR_Linux + 46) +#define __NR_shutdown (__NR_Linux + 47) +#define __NR_bind (__NR_Linux + 48) +#define __NR_listen (__NR_Linux + 49) +#define __NR_getsockname (__NR_Linux + 50) +#define __NR_getpeername (__NR_Linux + 51) +#define __NR_socketpair (__NR_Linux + 52) +#define __NR_setsockopt (__NR_Linux + 53) +#define __NR_getsockopt (__NR_Linux + 54) +#define __NR_clone (__NR_Linux + 55) +#define __NR_fork (__NR_Linux + 56) +#define __NR_execve (__NR_Linux + 57) +#define __NR_exit (__NR_Linux + 58) +#define __NR_wait4 (__NR_Linux + 59) +#define __NR_kill (__NR_Linux + 60) +#define __NR_uname (__NR_Linux + 61) +#define __NR_semget (__NR_Linux + 62) +#define __NR_semop (__NR_Linux + 63) +#define __NR_semctl (__NR_Linux + 64) +#define __NR_shmdt (__NR_Linux + 65) +#define __NR_msgget (__NR_Linux + 66) +#define __NR_msgsnd (__NR_Linux + 67) +#define __NR_msgrcv (__NR_Linux + 68) +#define __NR_msgctl (__NR_Linux + 69) +#define __NR_fcntl (__NR_Linux + 70) +#define __NR_flock (__NR_Linux + 71) +#define __NR_fsync (__NR_Linux + 72) +#define __NR_fdatasync (__NR_Linux + 73) +#define __NR_truncate (__NR_Linux + 74) +#define __NR_ftruncate (__NR_Linux + 75) +#define __NR_getdents (__NR_Linux + 76) +#define __NR_getcwd (__NR_Linux + 77) +#define __NR_chdir (__NR_Linux + 78) +#define __NR_fchdir (__NR_Linux + 79) +#define __NR_rename (__NR_Linux + 80) +#define __NR_mkdir (__NR_Linux + 81) +#define __NR_rmdir (__NR_Linux + 82) +#define __NR_creat (__NR_Linux + 83) +#define __NR_link (__NR_Linux + 84) +#define __NR_unlink (__NR_Linux + 85) +#define __NR_symlink (__NR_Linux + 86) +#define __NR_readlink (__NR_Linux + 87) +#define __NR_chmod (__NR_Linux + 88) +#define __NR_fchmod (__NR_Linux + 89) +#define __NR_chown (__NR_Linux + 90) +#define __NR_fchown (__NR_Linux + 91) +#define __NR_lchown (__NR_Linux + 92) +#define __NR_umask (__NR_Linux + 93) +#define __NR_gettimeofday (__NR_Linux + 94) +#define __NR_getrlimit (__NR_Linux + 95) +#define __NR_getrusage (__NR_Linux + 96) +#define __NR_sysinfo (__NR_Linux + 97) +#define __NR_times (__NR_Linux + 98) +#define __NR_ptrace (__NR_Linux + 99) +#define __NR_getuid (__NR_Linux + 100) +#define __NR_syslog (__NR_Linux + 101) +#define __NR_getgid (__NR_Linux + 102) +#define __NR_setuid (__NR_Linux + 103) +#define __NR_setgid (__NR_Linux + 104) +#define __NR_geteuid (__NR_Linux + 105) +#define __NR_getegid (__NR_Linux + 106) +#define __NR_setpgid (__NR_Linux + 107) +#define __NR_getppid (__NR_Linux + 108) +#define __NR_getpgrp (__NR_Linux + 109) +#define __NR_setsid (__NR_Linux + 110) +#define __NR_setreuid (__NR_Linux + 111) +#define __NR_setregid (__NR_Linux + 112) +#define __NR_getgroups (__NR_Linux + 113) +#define __NR_setgroups (__NR_Linux + 114) +#define __NR_setresuid (__NR_Linux + 115) +#define __NR_getresuid (__NR_Linux + 116) +#define __NR_setresgid (__NR_Linux + 117) +#define __NR_getresgid (__NR_Linux + 118) +#define __NR_getpgid (__NR_Linux + 119) +#define __NR_setfsuid (__NR_Linux + 120) +#define __NR_setfsgid (__NR_Linux + 121) +#define __NR_getsid (__NR_Linux + 122) +#define __NR_capget (__NR_Linux + 123) +#define __NR_capset (__NR_Linux + 124) +#define __NR_rt_sigpending (__NR_Linux + 125) +#define __NR_rt_sigtimedwait (__NR_Linux + 126) +#define __NR_rt_sigqueueinfo (__NR_Linux + 127) +#define __NR_rt_sigsuspend (__NR_Linux + 128) +#define __NR_sigaltstack (__NR_Linux + 129) +#define __NR_utime (__NR_Linux + 130) +#define __NR_mknod (__NR_Linux + 131) +#define __NR_personality (__NR_Linux + 132) +#define __NR_ustat (__NR_Linux + 133) +#define __NR_statfs (__NR_Linux + 134) +#define __NR_fstatfs (__NR_Linux + 135) +#define __NR_sysfs (__NR_Linux + 136) +#define __NR_getpriority (__NR_Linux + 137) +#define __NR_setpriority (__NR_Linux + 138) +#define __NR_sched_setparam (__NR_Linux + 139) +#define __NR_sched_getparam (__NR_Linux + 140) +#define __NR_sched_setscheduler (__NR_Linux + 141) +#define __NR_sched_getscheduler (__NR_Linux + 142) +#define __NR_sched_get_priority_max (__NR_Linux + 143) +#define __NR_sched_get_priority_min (__NR_Linux + 144) +#define __NR_sched_rr_get_interval (__NR_Linux + 145) +#define __NR_mlock (__NR_Linux + 146) +#define __NR_munlock (__NR_Linux + 147) +#define __NR_mlockall (__NR_Linux + 148) +#define __NR_munlockall (__NR_Linux + 149) +#define __NR_vhangup (__NR_Linux + 150) +#define __NR_pivot_root (__NR_Linux + 151) +#define __NR__sysctl (__NR_Linux + 152) +#define __NR_prctl (__NR_Linux + 153) +#define __NR_adjtimex (__NR_Linux + 154) +#define __NR_setrlimit (__NR_Linux + 155) +#define __NR_chroot (__NR_Linux + 156) +#define __NR_sync (__NR_Linux + 157) +#define __NR_acct (__NR_Linux + 158) +#define __NR_settimeofday (__NR_Linux + 159) +#define __NR_mount (__NR_Linux + 160) +#define __NR_umount2 (__NR_Linux + 161) +#define __NR_swapon (__NR_Linux + 162) +#define __NR_swapoff (__NR_Linux + 163) +#define __NR_reboot (__NR_Linux + 164) +#define __NR_sethostname (__NR_Linux + 165) +#define __NR_setdomainname (__NR_Linux + 166) +#define __NR_create_module (__NR_Linux + 167) +#define __NR_init_module (__NR_Linux + 168) +#define __NR_delete_module (__NR_Linux + 169) +#define __NR_get_kernel_syms (__NR_Linux + 170) +#define __NR_query_module (__NR_Linux + 171) +#define __NR_quotactl (__NR_Linux + 172) +#define __NR_nfsservctl (__NR_Linux + 173) +#define __NR_getpmsg (__NR_Linux + 174) +#define __NR_putpmsg (__NR_Linux + 175) +#define __NR_afs_syscall (__NR_Linux + 176) +#define __NR_reserved177 (__NR_Linux + 177) +#define __NR_gettid (__NR_Linux + 178) +#define __NR_readahead (__NR_Linux + 179) +#define __NR_setxattr (__NR_Linux + 180) +#define __NR_lsetxattr (__NR_Linux + 181) +#define __NR_fsetxattr (__NR_Linux + 182) +#define __NR_getxattr (__NR_Linux + 183) +#define __NR_lgetxattr (__NR_Linux + 184) +#define __NR_fgetxattr (__NR_Linux + 185) +#define __NR_listxattr (__NR_Linux + 186) +#define __NR_llistxattr (__NR_Linux + 187) +#define __NR_flistxattr (__NR_Linux + 188) +#define __NR_removexattr (__NR_Linux + 189) +#define __NR_lremovexattr (__NR_Linux + 190) +#define __NR_fremovexattr (__NR_Linux + 191) +#define __NR_tkill (__NR_Linux + 192) +#define __NR_reserved193 (__NR_Linux + 193) +#define __NR_futex (__NR_Linux + 194) +#define __NR_sched_setaffinity (__NR_Linux + 195) +#define __NR_sched_getaffinity (__NR_Linux + 196) +#define __NR_cacheflush (__NR_Linux + 197) +#define __NR_cachectl (__NR_Linux + 198) +#define __NR_sysmips (__NR_Linux + 199) +#define __NR_io_setup (__NR_Linux + 200) +#define __NR_io_destroy (__NR_Linux + 201) +#define __NR_io_getevents (__NR_Linux + 202) +#define __NR_io_submit (__NR_Linux + 203) +#define __NR_io_cancel (__NR_Linux + 204) +#define __NR_exit_group (__NR_Linux + 205) +#define __NR_lookup_dcookie (__NR_Linux + 206) +#define __NR_epoll_create (__NR_Linux + 207) +#define __NR_epoll_ctl (__NR_Linux + 208) +#define __NR_epoll_wait (__NR_Linux + 209) +#define __NR_remap_file_pages (__NR_Linux + 210) +#define __NR_rt_sigreturn (__NR_Linux + 211) +#define __NR_fcntl64 (__NR_Linux + 212) +#define __NR_set_tid_address (__NR_Linux + 213) +#define __NR_restart_syscall (__NR_Linux + 214) +#define __NR_semtimedop (__NR_Linux + 215) +#define __NR_fadvise64 (__NR_Linux + 216) +#define __NR_statfs64 (__NR_Linux + 217) +#define __NR_fstatfs64 (__NR_Linux + 218) +#define __NR_sendfile64 (__NR_Linux + 219) +#define __NR_timer_create (__NR_Linux + 220) +#define __NR_timer_settime (__NR_Linux + 221) +#define __NR_timer_gettime (__NR_Linux + 222) +#define __NR_timer_getoverrun (__NR_Linux + 223) +#define __NR_timer_delete (__NR_Linux + 224) +#define __NR_clock_settime (__NR_Linux + 225) +#define __NR_clock_gettime (__NR_Linux + 226) +#define __NR_clock_getres (__NR_Linux + 227) +#define __NR_clock_nanosleep (__NR_Linux + 228) +#define __NR_tgkill (__NR_Linux + 229) +#define __NR_utimes (__NR_Linux + 230) +#define __NR_mbind (__NR_Linux + 231) +#define __NR_get_mempolicy (__NR_Linux + 232) +#define __NR_set_mempolicy (__NR_Linux + 233) +#define __NR_mq_open (__NR_Linux + 234) +#define __NR_mq_unlink (__NR_Linux + 235) +#define __NR_mq_timedsend (__NR_Linux + 236) +#define __NR_mq_timedreceive (__NR_Linux + 237) +#define __NR_mq_notify (__NR_Linux + 238) +#define __NR_mq_getsetattr (__NR_Linux + 239) +#define __NR_vserver (__NR_Linux + 240) +#define __NR_waitid (__NR_Linux + 241) +/* #define __NR_sys_setaltroot (__NR_Linux + 242) */ +#define __NR_add_key (__NR_Linux + 243) +#define __NR_request_key (__NR_Linux + 244) +#define __NR_keyctl (__NR_Linux + 245) +#define __NR_set_thread_area (__NR_Linux + 246) +#define __NR_inotify_init (__NR_Linux + 247) +#define __NR_inotify_add_watch (__NR_Linux + 248) +#define __NR_inotify_rm_watch (__NR_Linux + 249) +#define __NR_migrate_pages (__NR_Linux + 250) +#define __NR_openat (__NR_Linux + 251) +#define __NR_mkdirat (__NR_Linux + 252) +#define __NR_mknodat (__NR_Linux + 253) +#define __NR_fchownat (__NR_Linux + 254) +#define __NR_futimesat (__NR_Linux + 255) +#define __NR_newfstatat (__NR_Linux + 256) +#define __NR_unlinkat (__NR_Linux + 257) +#define __NR_renameat (__NR_Linux + 258) +#define __NR_linkat (__NR_Linux + 259) +#define __NR_symlinkat (__NR_Linux + 260) +#define __NR_readlinkat (__NR_Linux + 261) +#define __NR_fchmodat (__NR_Linux + 262) +#define __NR_faccessat (__NR_Linux + 263) +#define __NR_pselect6 (__NR_Linux + 264) +#define __NR_ppoll (__NR_Linux + 265) +#define __NR_unshare (__NR_Linux + 266) +#define __NR_splice (__NR_Linux + 267) +#define __NR_sync_file_range (__NR_Linux + 268) +#define __NR_tee (__NR_Linux + 269) +#define __NR_vmsplice (__NR_Linux + 270) +#define __NR_move_pages (__NR_Linux + 271) +#define __NR_set_robust_list (__NR_Linux + 272) +#define __NR_get_robust_list (__NR_Linux + 273) +#define __NR_kexec_load (__NR_Linux + 274) +#define __NR_getcpu (__NR_Linux + 275) +#define __NR_epoll_pwait (__NR_Linux + 276) +#define __NR_ioprio_set (__NR_Linux + 277) +#define __NR_ioprio_get (__NR_Linux + 278) +#define __NR_utimensat (__NR_Linux + 279) +#define __NR_signalfd (__NR_Linux + 280) +#define __NR_timerfd (__NR_Linux + 281) +#define __NR_eventfd (__NR_Linux + 282) +#define __NR_fallocate (__NR_Linux + 283) +#define __NR_timerfd_create (__NR_Linux + 284) +#define __NR_timerfd_gettime (__NR_Linux + 285) +#define __NR_timerfd_settime (__NR_Linux + 286) +#define __NR_signalfd4 (__NR_Linux + 287) +#define __NR_eventfd2 (__NR_Linux + 288) +#define __NR_epoll_create1 (__NR_Linux + 289) +#define __NR_dup3 (__NR_Linux + 290) +#define __NR_pipe2 (__NR_Linux + 291) +#define __NR_inotify_init1 (__NR_Linux + 292) + +/* + * Offset of the last N32 flavoured syscall + */ +#define __NR_Linux_syscalls 292 + +#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ + +#define __NR_N32_Linux 6000 +#define __NR_N32_Linux_syscalls 292 + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +#define __ARCH_OMIT_COMPAT_SYS_GETDENTS64 +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +# ifdef CONFIG_32BIT +# define __ARCH_WANT_STAT64 +# define __ARCH_WANT_SYS_TIME +# endif +# ifdef CONFIG_MIPS32_O32 +# define __ARCH_WANT_COMPAT_SYS_TIME +# endif + +/* whitelists for checksyscalls */ +#define __IGNORE_select +#define __IGNORE_vfork +#define __IGNORE_time +#define __IGNORE_uselib +#define __IGNORE_fadvise64_64 +#define __IGNORE_getdents64 +#if _MIPS_SIM == _MIPS_SIM_NABI32 +#define __IGNORE_truncate64 +#define __IGNORE_ftruncate64 +#define __IGNORE_stat64 +#define __IGNORE_lstat64 +#define __IGNORE_fstat64 +#define __IGNORE_fstatat64 +#endif + +#endif /* !__ASSEMBLY__ */ + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n" #x "\t=\tsys_ni_syscall") + +#endif /* __KERNEL__ */ +#endif /* _ASM_UNISTD_H */ diff --git a/arch/mips/include/asm/user.h b/arch/mips/include/asm/user.h new file mode 100644 index 000000000000..afa83a4c1888 --- /dev/null +++ b/arch/mips/include/asm/user.h @@ -0,0 +1,58 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle + */ +#ifndef _ASM_USER_H +#define _ASM_USER_H + +#include +#include + +/* + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd, NOT the irix-core). The file + * contents are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ +struct user { + unsigned long regs[EF_SIZE / /* integer and fp regs */ + sizeof(unsigned long) + 64]; + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* _ASM_USER_H */ diff --git a/arch/mips/include/asm/vga.h b/arch/mips/include/asm/vga.h new file mode 100644 index 000000000000..f4cff7e4fa8a --- /dev/null +++ b/arch/mips/include/asm/vga.h @@ -0,0 +1,47 @@ +/* + * Access to VGA videoram + * + * (c) 1998 Martin Mares + */ +#ifndef _ASM_VGA_H +#define _ASM_VGA_H + +#include + +/* + * On the PC, we can just recalculate addresses and then + * access the videoram directly without any black magic. + */ + +#define VGA_MAP_MEM(x, s) (0xb0000000L + (unsigned long)(x)) + +#define vga_readb(x) (*(x)) +#define vga_writeb(x, y) (*(y) = (x)) + +#define VT_BUF_HAVE_RW +/* + * These are only needed for supporting VGA or MDA text mode, which use little + * endian byte ordering. + * In other cases, we can optimize by using native byte ordering and + * has already done the right job for us. + */ + +#undef scr_writew +#undef scr_readw + +static inline void scr_writew(u16 val, volatile u16 *addr) +{ + *addr = cpu_to_le16(val); +} + +static inline u16 scr_readw(volatile const u16 *addr) +{ + return le16_to_cpu(*addr); +} + +#define scr_memcpyw(d, s, c) memcpy(d, s, c) +#define scr_memmovew(d, s, c) memmove(d, s, c) +#define VT_BUF_HAVE_MEMCPYW +#define VT_BUF_HAVE_MEMMOVEW + +#endif /* _ASM_VGA_H */ diff --git a/arch/mips/include/asm/vpe.h b/arch/mips/include/asm/vpe.h new file mode 100644 index 000000000000..c6e1b961537d --- /dev/null +++ b/arch/mips/include/asm/vpe.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ + +#ifndef _ASM_VPE_H +#define _ASM_VPE_H + +struct vpe_notifications { + void (*start)(int vpe); + void (*stop)(int vpe); + + struct list_head list; +}; + + +extern int vpe_notify(int index, struct vpe_notifications *notify); + +extern void *vpe_get_shared(int index); +extern int vpe_getuid(int index); +extern int vpe_getgid(int index); +extern char *vpe_getcwd(int index); + +#endif /* _ASM_VPE_H */ diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h new file mode 100644 index 000000000000..e0ee05a3dfcc --- /dev/null +++ b/arch/mips/include/asm/vr41xx/capcella.h @@ -0,0 +1,43 @@ +/* + * capcella.h, Include file for ZAO Networks Capcella. + * + * Copyright (C) 2002-2004 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ZAO_CAPCELLA_H +#define __ZAO_CAPCELLA_H + +#include + +/* + * General-Purpose I/O Pin Number + */ +#define PC104PLUS_INTA_PIN 2 +#define PC104PLUS_INTB_PIN 3 +#define PC104PLUS_INTC_PIN 4 +#define PC104PLUS_INTD_PIN 5 + +/* + * Interrupt Number + */ +#define RTL8139_1_IRQ GIU_IRQ(PC104PLUS_INTC_PIN) +#define RTL8139_2_IRQ GIU_IRQ(PC104PLUS_INTD_PIN) +#define PC104PLUS_INTA_IRQ GIU_IRQ(PC104PLUS_INTA_PIN) +#define PC104PLUS_INTB_IRQ GIU_IRQ(PC104PLUS_INTB_PIN) +#define PC104PLUS_INTC_IRQ GIU_IRQ(PC104PLUS_INTC_PIN) +#define PC104PLUS_INTD_IRQ GIU_IRQ(PC104PLUS_INTD_PIN) + +#endif /* __ZAO_CAPCELLA_H */ diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h new file mode 100644 index 000000000000..0bcdd3a5c256 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/giu.h @@ -0,0 +1,78 @@ +/* + * Include file for NEC VR4100 series General-purpose I/O Unit. + * + * Copyright (C) 2005 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __NEC_VR41XX_GIU_H +#define __NEC_VR41XX_GIU_H + +/* + * NEC VR4100 series GIU platform device IDs. + */ +enum { + GPIO_50PINS_PULLUPDOWN, + GPIO_36PINS, + GPIO_48PINS_EDGE_SELECT, +}; + +typedef enum { + IRQ_TRIGGER_LEVEL, + IRQ_TRIGGER_EDGE, + IRQ_TRIGGER_EDGE_FALLING, + IRQ_TRIGGER_EDGE_RISING, +} irq_trigger_t; + +typedef enum { + IRQ_SIGNAL_THROUGH, + IRQ_SIGNAL_HOLD, +} irq_signal_t; + +extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal); + +typedef enum { + IRQ_LEVEL_LOW, + IRQ_LEVEL_HIGH, +} irq_level_t; + +extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level); + +typedef enum { + GPIO_DATA_LOW, + GPIO_DATA_HIGH, + GPIO_DATA_INVAL, +} gpio_data_t; + +extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin); +extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data); + +typedef enum { + GPIO_INPUT, + GPIO_OUTPUT, + GPIO_OUTPUT_DISABLE, +} gpio_direction_t; + +extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir); + +typedef enum { + GPIO_PULL_DOWN, + GPIO_PULL_UP, + GPIO_PULL_DISABLE, +} gpio_pull_t; + +extern int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull); + +#endif /* __NEC_VR41XX_GIU_H */ diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h new file mode 100644 index 000000000000..d315dfbc08f2 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/irq.h @@ -0,0 +1,101 @@ +/* + * include/asm-mips/vr41xx/irq.h + * + * Interrupt numbers for NEC VR4100 series. + * + * Copyright (C) 1999 Michael Klar + * Copyright (C) 2001, 2002 Paul Mundt + * Copyright (C) 2002 MontaVista Software, Inc. + * Copyright (C) 2002 TimeSys Corp. + * Copyright (C) 2003-2006 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __NEC_VR41XX_IRQ_H +#define __NEC_VR41XX_IRQ_H + +/* + * CPU core Interrupt Numbers + */ +#define MIPS_CPU_IRQ_BASE 0 +#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x)) +#define MIPS_SOFTINT0_IRQ MIPS_CPU_IRQ(0) +#define MIPS_SOFTINT1_IRQ MIPS_CPU_IRQ(1) +#define INT0_IRQ MIPS_CPU_IRQ(2) +#define INT1_IRQ MIPS_CPU_IRQ(3) +#define INT2_IRQ MIPS_CPU_IRQ(4) +#define INT3_IRQ MIPS_CPU_IRQ(5) +#define INT4_IRQ MIPS_CPU_IRQ(6) +#define TIMER_IRQ MIPS_CPU_IRQ(7) + +/* + * SYINT1 Interrupt Numbers + */ +#define SYSINT1_IRQ_BASE 8 +#define SYSINT1_IRQ(x) (SYSINT1_IRQ_BASE + (x)) +#define BATTRY_IRQ SYSINT1_IRQ(0) +#define POWER_IRQ SYSINT1_IRQ(1) +#define RTCLONG1_IRQ SYSINT1_IRQ(2) +#define ELAPSEDTIME_IRQ SYSINT1_IRQ(3) +/* RFU */ +#define PIU_IRQ SYSINT1_IRQ(5) +#define AIU_IRQ SYSINT1_IRQ(6) +#define KIU_IRQ SYSINT1_IRQ(7) +#define GIUINT_IRQ SYSINT1_IRQ(8) +#define SIU_IRQ SYSINT1_IRQ(9) +#define BUSERR_IRQ SYSINT1_IRQ(10) +#define SOFTINT_IRQ SYSINT1_IRQ(11) +#define CLKRUN_IRQ SYSINT1_IRQ(12) +#define DOZEPIU_IRQ SYSINT1_IRQ(13) +#define SYSINT1_IRQ_LAST DOZEPIU_IRQ + +/* + * SYSINT2 Interrupt Numbers + */ +#define SYSINT2_IRQ_BASE 24 +#define SYSINT2_IRQ(x) (SYSINT2_IRQ_BASE + (x)) +#define RTCLONG2_IRQ SYSINT2_IRQ(0) +#define LED_IRQ SYSINT2_IRQ(1) +#define HSP_IRQ SYSINT2_IRQ(2) +#define TCLOCK_IRQ SYSINT2_IRQ(3) +#define FIR_IRQ SYSINT2_IRQ(4) +#define CEU_IRQ SYSINT2_IRQ(4) /* same number as FIR_IRQ */ +#define DSIU_IRQ SYSINT2_IRQ(5) +#define PCI_IRQ SYSINT2_IRQ(6) +#define SCU_IRQ SYSINT2_IRQ(7) +#define CSI_IRQ SYSINT2_IRQ(8) +#define BCU_IRQ SYSINT2_IRQ(9) +#define ETHERNET_IRQ SYSINT2_IRQ(10) +#define SYSINT2_IRQ_LAST ETHERNET_IRQ + +/* + * GIU Interrupt Numbers + */ +#define GIU_IRQ_BASE 40 +#define GIU_IRQ(x) (GIU_IRQ_BASE + (x)) /* IRQ 40-71 */ +#define GIU_IRQ_LAST GIU_IRQ(31) + +/* + * VRC4173 Interrupt Numbers + */ +#define VRC4173_IRQ_BASE 72 +#define VRC4173_IRQ(x) (VRC4173_IRQ_BASE + (x)) +#define VRC4173_USB_IRQ VRC4173_IRQ(0) +#define VRC4173_PCMCIA2_IRQ VRC4173_IRQ(1) +#define VRC4173_PCMCIA1_IRQ VRC4173_IRQ(2) +#define VRC4173_PS2CH2_IRQ VRC4173_IRQ(3) +#define VRC4173_PS2CH1_IRQ VRC4173_IRQ(4) +#define VRC4173_PIU_IRQ VRC4173_IRQ(5) +#define VRC4173_AIU_IRQ VRC4173_IRQ(6) +#define VRC4173_KIU_IRQ VRC4173_IRQ(7) +#define VRC4173_GIU_IRQ VRC4173_IRQ(8) +#define VRC4173_AC97_IRQ VRC4173_IRQ(9) +#define VRC4173_AC97INT1_IRQ VRC4173_IRQ(10) +/* RFU */ +#define VRC4173_DOZEPIU_IRQ VRC4173_IRQ(13) +#define VRC4173_IRQ_LAST VRC4173_DOZEPIU_IRQ + +#endif /* __NEC_VR41XX_IRQ_H */ diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h new file mode 100644 index 000000000000..1d67df843dc3 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/mpc30x.h @@ -0,0 +1,37 @@ +/* + * mpc30x.h, Include file for Victor MP-C303/304. + * + * Copyright (C) 2002-2004 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __VICTOR_MPC30X_H +#define __VICTOR_MPC30X_H + +#include + +/* + * General-Purpose I/O Pin Number + */ +#define VRC4173_PIN 1 +#define MQ200_PIN 4 + +/* + * Interrupt Number + */ +#define VRC4173_CASCADE_IRQ GIU_IRQ(VRC4173_PIN) +#define MQ200_IRQ GIU_IRQ(MQ200_PIN) + +#endif /* __VICTOR_MPC30X_H */ diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h new file mode 100644 index 000000000000..6fc01ce19777 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/pci.h @@ -0,0 +1,90 @@ +/* + * Include file for NEC VR4100 series PCI Control Unit. + * + * Copyright (C) 2004-2005 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __NEC_VR41XX_PCI_H +#define __NEC_VR41XX_PCI_H + +#define PCI_MASTER_ADDRESS_MASK 0x7fffffffU + +struct pci_master_address_conversion { + uint32_t bus_base_address; + uint32_t address_mask; + uint32_t pci_base_address; +}; + +struct pci_target_address_conversion { + uint32_t address_mask; + uint32_t bus_base_address; +}; + +typedef enum { + CANNOT_LOCK_FROM_DEVICE, + CAN_LOCK_FROM_DEVICE, +} pci_exclusive_access_t; + +struct pci_mailbox_address { + uint32_t base_address; +}; + +struct pci_target_address_window { + uint32_t base_address; +}; + +typedef enum { + PCI_ARBITRATION_MODE_FAIR, + PCI_ARBITRATION_MODE_ALTERNATE_0, + PCI_ARBITRATION_MODE_ALTERNATE_B, +} pci_arbiter_priority_control_t; + +typedef enum { + PCI_TAKE_AWAY_GNT_DISABLE, + PCI_TAKE_AWAY_GNT_ENABLE, +} pci_take_away_gnt_mode_t; + +struct pci_controller_unit_setup { + struct pci_master_address_conversion *master_memory1; + struct pci_master_address_conversion *master_memory2; + + struct pci_target_address_conversion *target_memory1; + struct pci_target_address_conversion *target_memory2; + + struct pci_master_address_conversion *master_io; + + pci_exclusive_access_t exclusive_access; + + uint32_t pci_clock_max; + uint8_t wait_time_limit_from_irdy_to_trdy; /* Only VR4122 is supported */ + + struct pci_mailbox_address *mailbox; + struct pci_target_address_window *target_window1; + struct pci_target_address_window *target_window2; + + uint8_t master_latency_timer; + uint8_t retry_limit; + + pci_arbiter_priority_control_t arbiter_priority_control; + pci_take_away_gnt_mode_t take_away_gnt_mode; + + struct resource *mem_resource; + struct resource *io_resource; +}; + +extern void vr41xx_pciu_setup(struct pci_controller_unit_setup *setup); + +#endif /* __NEC_VR41XX_PCI_H */ diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h new file mode 100644 index 000000000000..da9f6e373409 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/siu.h @@ -0,0 +1,58 @@ +/* + * Include file for NEC VR4100 series Serial Interface Unit. + * + * Copyright (C) 2005-2008 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __NEC_VR41XX_SIU_H +#define __NEC_VR41XX_SIU_H + +#define SIU_PORTS_MAX 2 + +typedef enum { + SIU_INTERFACE_RS232C, + SIU_INTERFACE_IRDA, +} siu_interface_t; + +extern void vr41xx_select_siu_interface(siu_interface_t interface); + +typedef enum { + SIU_USE_IRDA, + FIR_USE_IRDA, +} irda_use_t; + +extern void vr41xx_use_irda(irda_use_t use); + +typedef enum { + SHARP_IRDA, + TEMIC_IRDA, + HP_IRDA, +} irda_module_t; + +typedef enum { + IRDA_TX_1_5MBPS, + IRDA_TX_4MBPS, +} irda_speed_t; + +extern void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed); + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE +extern void vr41xx_siu_early_setup(struct uart_port *port); +#else +static inline void vr41xx_siu_early_setup(struct uart_port *port) {} +#endif + +#endif /* __NEC_VR41XX_SIU_H */ diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h new file mode 100644 index 000000000000..dc981b4be0a4 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/tb0219.h @@ -0,0 +1,42 @@ +/* + * tb0219.h, Include file for TANBAC TB0219. + * + * Copyright (C) 2002-2004 Yoichi Yuasa + * + * Modified for TANBAC TB0219: + * Copyright (C) 2003 Megasolution Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __TANBAC_TB0219_H +#define __TANBAC_TB0219_H + +#include + +/* + * General-Purpose I/O Pin Number + */ +#define TB0219_PCI_SLOT1_PIN 2 +#define TB0219_PCI_SLOT2_PIN 3 +#define TB0219_PCI_SLOT3_PIN 4 + +/* + * Interrupt Number + */ +#define TB0219_PCI_SLOT1_IRQ GIU_IRQ(TB0219_PCI_SLOT1_PIN) +#define TB0219_PCI_SLOT2_IRQ GIU_IRQ(TB0219_PCI_SLOT2_PIN) +#define TB0219_PCI_SLOT3_IRQ GIU_IRQ(TB0219_PCI_SLOT3_PIN) + +#endif /* __TANBAC_TB0219_H */ diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h new file mode 100644 index 000000000000..de527dcfa5f3 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/tb0226.h @@ -0,0 +1,43 @@ +/* + * tb0226.h, Include file for TANBAC TB0226. + * + * Copyright (C) 2002-2004 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __TANBAC_TB0226_H +#define __TANBAC_TB0226_H + +#include + +/* + * General-Purpose I/O Pin Number + */ +#define GD82559_1_PIN 2 +#define GD82559_2_PIN 3 +#define UPD720100_INTA_PIN 4 +#define UPD720100_INTB_PIN 8 +#define UPD720100_INTC_PIN 13 + +/* + * Interrupt Number + */ +#define GD82559_1_IRQ GIU_IRQ(GD82559_1_PIN) +#define GD82559_2_IRQ GIU_IRQ(GD82559_2_PIN) +#define UPD720100_INTA_IRQ GIU_IRQ(UPD720100_INTA_PIN) +#define UPD720100_INTB_IRQ GIU_IRQ(UPD720100_INTB_PIN) +#define UPD720100_INTC_IRQ GIU_IRQ(UPD720100_INTC_PIN) + +#endif /* __TANBAC_TB0226_H */ diff --git a/arch/mips/include/asm/vr41xx/tb0287.h b/arch/mips/include/asm/vr41xx/tb0287.h new file mode 100644 index 000000000000..61bead68abf0 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/tb0287.h @@ -0,0 +1,43 @@ +/* + * tb0287.h, Include file for TANBAC TB0287 mini-ITX board. + * + * Copyright (C) 2005 Media Lab Inc. + * + * This code is largely based on tb0219.h. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __TANBAC_TB0287_H +#define __TANBAC_TB0287_H + +#include + +/* + * General-Purpose I/O Pin Number + */ +#define TB0287_PCI_SLOT_PIN 2 +#define TB0287_SM501_PIN 3 +#define TB0287_SIL680A_PIN 8 +#define TB0287_RTL8110_PIN 13 + +/* + * Interrupt Number + */ +#define TB0287_PCI_SLOT_IRQ GIU_IRQ(TB0287_PCI_SLOT_PIN) +#define TB0287_SM501_IRQ GIU_IRQ(TB0287_SM501_PIN) +#define TB0287_SIL680A_IRQ GIU_IRQ(TB0287_SIL680A_PIN) +#define TB0287_RTL8110_IRQ GIU_IRQ(TB0287_RTL8110_PIN) + +#endif /* __TANBAC_TB0287_H */ diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h new file mode 100644 index 000000000000..22be64971cc6 --- /dev/null +++ b/arch/mips/include/asm/vr41xx/vr41xx.h @@ -0,0 +1,152 @@ +/* + * include/asm-mips/vr41xx/vr41xx.h + * + * Include file for NEC VR4100 series. + * + * Copyright (C) 1999 Michael Klar + * Copyright (C) 2001, 2002 Paul Mundt + * Copyright (C) 2002 MontaVista Software, Inc. + * Copyright (C) 2002 TimeSys Corp. + * Copyright (C) 2003-2008 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __NEC_VR41XX_H +#define __NEC_VR41XX_H + +#include + +/* + * CPU Revision + */ +/* VR4122 0x00000c70-0x00000c72 */ +#define PRID_VR4122_REV1_0 0x00000c70 +#define PRID_VR4122_REV2_0 0x00000c70 +#define PRID_VR4122_REV2_1 0x00000c70 +#define PRID_VR4122_REV3_0 0x00000c71 +#define PRID_VR4122_REV3_1 0x00000c72 + +/* VR4181A 0x00000c73-0x00000c7f */ +#define PRID_VR4181A_REV1_0 0x00000c73 +#define PRID_VR4181A_REV1_1 0x00000c74 + +/* VR4131 0x00000c80-0x00000c83 */ +#define PRID_VR4131_REV1_2 0x00000c80 +#define PRID_VR4131_REV2_0 0x00000c81 +#define PRID_VR4131_REV2_1 0x00000c82 +#define PRID_VR4131_REV2_2 0x00000c83 + +/* VR4133 0x00000c84- */ +#define PRID_VR4133 0x00000c84 + +/* + * Bus Control Uint + */ +extern unsigned long vr41xx_calculate_clock_frequency(void); +extern unsigned long vr41xx_get_vtclock_frequency(void); +extern unsigned long vr41xx_get_tclock_frequency(void); + +/* + * Clock Mask Unit + */ +typedef enum { + PIU_CLOCK, + SIU_CLOCK, + AIU_CLOCK, + KIU_CLOCK, + FIR_CLOCK, + DSIU_CLOCK, + CSI_CLOCK, + PCIU_CLOCK, + HSP_CLOCK, + PCI_CLOCK, + CEU_CLOCK, + ETHER0_CLOCK, + ETHER1_CLOCK +} vr41xx_clock_t; + +extern void vr41xx_supply_clock(vr41xx_clock_t clock); +extern void vr41xx_mask_clock(vr41xx_clock_t clock); + +/* + * Interrupt Control Unit + */ +extern int vr41xx_set_intassign(unsigned int irq, unsigned char intassign); +extern int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int)); + +#define PIUINT_COMMAND 0x0040 +#define PIUINT_DATA 0x0020 +#define PIUINT_PAGE1 0x0010 +#define PIUINT_PAGE0 0x0008 +#define PIUINT_DATALOST 0x0004 +#define PIUINT_STATUSCHANGE 0x0001 + +extern void vr41xx_enable_piuint(uint16_t mask); +extern void vr41xx_disable_piuint(uint16_t mask); + +#define AIUINT_INPUT_DMAEND 0x0800 +#define AIUINT_INPUT_DMAHALT 0x0400 +#define AIUINT_INPUT_DATALOST 0x0200 +#define AIUINT_INPUT_DATA 0x0100 +#define AIUINT_OUTPUT_DMAEND 0x0008 +#define AIUINT_OUTPUT_DMAHALT 0x0004 +#define AIUINT_OUTPUT_NODATA 0x0002 + +extern void vr41xx_enable_aiuint(uint16_t mask); +extern void vr41xx_disable_aiuint(uint16_t mask); + +#define KIUINT_DATALOST 0x0004 +#define KIUINT_DATAREADY 0x0002 +#define KIUINT_SCAN 0x0001 + +extern void vr41xx_enable_kiuint(uint16_t mask); +extern void vr41xx_disable_kiuint(uint16_t mask); + +#define DSIUINT_CTS 0x0800 +#define DSIUINT_RXERR 0x0400 +#define DSIUINT_RX 0x0200 +#define DSIUINT_TX 0x0100 +#define DSIUINT_ALL 0x0f00 + +extern void vr41xx_enable_dsiuint(uint16_t mask); +extern void vr41xx_disable_dsiuint(uint16_t mask); + +#define FIRINT_UNIT 0x0010 +#define FIRINT_RX_DMAEND 0x0008 +#define FIRINT_RX_DMAHALT 0x0004 +#define FIRINT_TX_DMAEND 0x0002 +#define FIRINT_TX_DMAHALT 0x0001 + +extern void vr41xx_enable_firint(uint16_t mask); +extern void vr41xx_disable_firint(uint16_t mask); + +extern void vr41xx_enable_pciint(void); +extern void vr41xx_disable_pciint(void); + +extern void vr41xx_enable_scuint(void); +extern void vr41xx_disable_scuint(void); + +#define CSIINT_TX_DMAEND 0x0040 +#define CSIINT_TX_DMAHALT 0x0020 +#define CSIINT_TX_DATA 0x0010 +#define CSIINT_TX_FIFOEMPTY 0x0008 +#define CSIINT_RX_DMAEND 0x0004 +#define CSIINT_RX_DMAHALT 0x0002 +#define CSIINT_RX_FIFOEMPTY 0x0001 + +extern void vr41xx_enable_csiint(uint16_t mask); +extern void vr41xx_disable_csiint(uint16_t mask); + +extern void vr41xx_enable_bcuint(void); +extern void vr41xx_disable_bcuint(void); + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE +extern void vr41xx_siu_setup(void); +#else +static inline void vr41xx_siu_setup(void) {} +#endif + +#endif /* __NEC_VR41XX_H */ diff --git a/arch/mips/include/asm/war.h b/arch/mips/include/asm/war.h new file mode 100644 index 000000000000..22361d5e3bf0 --- /dev/null +++ b/arch/mips/include/asm/war.h @@ -0,0 +1,244 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + * Copyright (C) 2007 Maciej W. Rozycki + */ +#ifndef _ASM_WAR_H +#define _ASM_WAR_H + +#include + +/* + * Work around certain R4000 CPU errata (as implemented by GCC): + * + * - A double-word or a variable shift may give an incorrect result + * if executed immediately after starting an integer division: + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * erratum #28 + * "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum + * #19 + * + * - A double-word or a variable shift may give an incorrect result + * if executed while an integer multiplication is in progress: + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * errata #16 & #28 + * + * - An integer division may give an incorrect result if started in + * a delay slot of a taken branch or a jump: + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * erratum #52 + */ +#ifdef CONFIG_CPU_R4000_WORKAROUNDS +#define R4000_WAR 1 +#else +#define R4000_WAR 0 +#endif + +/* + * Work around certain R4400 CPU errata (as implemented by GCC): + * + * - A double-word or a variable shift may give an incorrect result + * if executed immediately after starting an integer division: + * "MIPS R4400MC Errata, Processor Revision 1.0", erratum #10 + * "MIPS R4400MC Errata, Processor Revision 2.0 & 3.0", erratum #4 + */ +#ifdef CONFIG_CPU_R4400_WORKAROUNDS +#define R4400_WAR 1 +#else +#define R4400_WAR 0 +#endif + +/* + * Work around the "daddi" and "daddiu" CPU errata: + * + * - The `daddi' instruction fails to trap on overflow. + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * erratum #23 + * + * - The `daddiu' instruction can produce an incorrect result. + * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", + * erratum #41 + * "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum + * #15 + * "MIPS R4400PC/SC Errata, Processor Revision 1.0", erratum #7 + * "MIPS R4400MC Errata, Processor Revision 1.0", erratum #5 + */ +#ifdef CONFIG_CPU_DADDI_WORKAROUNDS +#define DADDI_WAR 1 +#else +#define DADDI_WAR 0 +#endif + +/* + * Another R4600 erratum. Due to the lack of errata information the exact + * technical details aren't known. I've experimentally found that disabling + * interrupts during indexed I-cache flushes seems to be sufficient to deal + * with the issue. + */ +#ifndef R4600_V1_INDEX_ICACHEOP_WAR +#error Check setting of R4600_V1_INDEX_ICACHEOP_WAR for your platform +#endif + +/* + * Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata: + * + * 18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D, + * Hit_Invalidate_D and Create_Dirty_Excl_D should only be + * executed if there is no other dcache activity. If the dcache is + * accessed for another instruction immeidately preceding when these + * cache instructions are executing, it is possible that the dcache + * tag match outputs used by these cache instructions will be + * incorrect. These cache instructions should be preceded by at least + * four instructions that are not any kind of load or store + * instruction. + * + * This is not allowed: lw + * nop + * nop + * nop + * cache Hit_Writeback_Invalidate_D + * + * This is allowed: lw + * nop + * nop + * nop + * nop + * cache Hit_Writeback_Invalidate_D + */ +#ifndef R4600_V1_HIT_CACHEOP_WAR +#error Check setting of R4600_V1_HIT_CACHEOP_WAR for your platform +#endif + + +/* + * Writeback and invalidate the primary cache dcache before DMA. + * + * R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D, + * Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only + * operate correctly if the internal data cache refill buffer is empty. These + * CACHE instructions should be separated from any potential data cache miss + * by a load instruction to an uncached address to empty the response buffer." + * (Revision 2.0 device errata from IDT available on http://www.idt.com/ + * in .pdf format.) + */ +#ifndef R4600_V2_HIT_CACHEOP_WAR +#error Check setting of R4600_V2_HIT_CACHEOP_WAR for your platform +#endif + +/* + * When an interrupt happens on a CP0 register read instruction, CPU may + * lock up or read corrupted values of CP0 registers after it enters + * the exception handler. + * + * This workaround makes sure that we read a "safe" CP0 register as the + * first thing in the exception handler, which breaks one of the + * pre-conditions for this problem. + */ +#ifndef R5432_CP0_INTERRUPT_WAR +#error Check setting of R5432_CP0_INTERRUPT_WAR for your platform +#endif + +/* + * Workaround for the Sibyte M3 errata the text of which can be found at + * + * http://sibyte.broadcom.com/hw/bcm1250/docs/pass2errata.txt + * + * This will enable the use of a special TLB refill handler which does a + * consistency check on the information in c0_badvaddr and c0_entryhi and + * will just return and take the exception again if the information was + * found to be inconsistent. + */ +#ifndef BCM1250_M3_WAR +#error Check setting of BCM1250_M3_WAR for your platform +#endif + +/* + * This is a DUART workaround related to glitches around register accesses + */ +#ifndef SIBYTE_1956_WAR +#error Check setting of SIBYTE_1956_WAR for your platform +#endif + +/* + * Fill buffers not flushed on CACHE instructions + * + * Hit_Invalidate_I cacheops invalidate an icache line but the refill + * for that line can get stale data from the fill buffer instead of + * accessing memory if the previous icache miss was also to that line. + * + * Workaround: generate an icache refill from a different line + * + * Affects: + * MIPS 4K RTL revision <3.0, PRID revision <4 + */ +#ifndef MIPS4K_ICACHE_REFILL_WAR +#error Check setting of MIPS4K_ICACHE_REFILL_WAR for your platform +#endif + +/* + * Missing implicit forced flush of evictions caused by CACHE + * instruction + * + * Evictions caused by a CACHE instructions are not forced on to the + * bus. The BIU gives higher priority to fetches than to the data from + * the eviction buffer and no collision detection is performed between + * fetches and pending data from the eviction buffer. + * + * Workaround: Execute a SYNC instruction after the cache instruction + * + * Affects: + * MIPS 5Kc,5Kf RTL revision <2.3, PRID revision <8 + * MIPS 20Kc RTL revision <4.0, PRID revision diff --git a/arch/mips/include/asm/xtalk/xtalk.h b/arch/mips/include/asm/xtalk/xtalk.h new file mode 100644 index 000000000000..79bac882a739 --- /dev/null +++ b/arch/mips/include/asm/xtalk/xtalk.h @@ -0,0 +1,52 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * xtalk.h -- platform-independent crosstalk interface, derived from + * IRIX , revision 1.38. + * + * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc. + * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_XTALK_XTALK_H +#define _ASM_XTALK_XTALK_H + +#ifndef __ASSEMBLY__ +/* + * User-level device driver visible types + */ +typedef char xwidgetnum_t; /* xtalk widget number (0..15) */ + +#define XWIDGET_NONE -1 + +typedef int xwidget_part_num_t; /* xtalk widget part number */ + +#define XWIDGET_PART_NUM_NONE -1 + +typedef int xwidget_rev_num_t; /* xtalk widget revision number */ + +#define XWIDGET_REV_NUM_NONE -1 + +typedef int xwidget_mfg_num_t; /* xtalk widget manufacturing ID */ + +#define XWIDGET_MFG_NUM_NONE -1 + +typedef struct xtalk_piomap_s *xtalk_piomap_t; + +/* It is often convenient to fold the XIO target port + * number into the XIO address. + */ +#define XIO_NOWHERE (0xFFFFFFFFFFFFFFFFull) +#define XIO_ADDR_BITS (0x0000FFFFFFFFFFFFull) +#define XIO_PORT_BITS (0xF000000000000000ull) +#define XIO_PORT_SHIFT (60) + +#define XIO_PACKED(x) (((x)&XIO_PORT_BITS) != 0) +#define XIO_ADDR(x) ((x)&XIO_ADDR_BITS) +#define XIO_PORT(x) ((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT)) +#define XIO_PACK(p, o) ((((uint64_t)(p))<, revision 1.32. + * + * Copyright (C) 1996, 1999 Silcon Graphics, Inc. + * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + */ +#ifndef _ASM_XTALK_XWIDGET_H +#define _ASM_XTALK_XWIDGET_H + +#include +#include + +#define WIDGET_ID 0x04 +#define WIDGET_STATUS 0x0c +#define WIDGET_ERR_UPPER_ADDR 0x14 +#define WIDGET_ERR_LOWER_ADDR 0x1c +#define WIDGET_CONTROL 0x24 +#define WIDGET_REQ_TIMEOUT 0x2c +#define WIDGET_INTDEST_UPPER_ADDR 0x34 +#define WIDGET_INTDEST_LOWER_ADDR 0x3c +#define WIDGET_ERR_CMD_WORD 0x44 +#define WIDGET_LLP_CFG 0x4c +#define WIDGET_TFLUSH 0x54 + +/* WIDGET_ID */ +#define WIDGET_REV_NUM 0xf0000000 +#define WIDGET_PART_NUM 0x0ffff000 +#define WIDGET_MFG_NUM 0x00000ffe +#define WIDGET_REV_NUM_SHFT 28 +#define WIDGET_PART_NUM_SHFT 12 +#define WIDGET_MFG_NUM_SHFT 1 + +#define XWIDGET_PART_NUM(widgetid) (((widgetid) & WIDGET_PART_NUM) >> WIDGET_PART_NUM_SHFT) +#define XWIDGET_REV_NUM(widgetid) (((widgetid) & WIDGET_REV_NUM) >> WIDGET_REV_NUM_SHFT) +#define XWIDGET_MFG_NUM(widgetid) (((widgetid) & WIDGET_MFG_NUM) >> WIDGET_MFG_NUM_SHFT) + +/* WIDGET_STATUS */ +#define WIDGET_LLP_REC_CNT 0xff000000 +#define WIDGET_LLP_TX_CNT 0x00ff0000 +#define WIDGET_PENDING 0x0000001f + +/* WIDGET_ERR_UPPER_ADDR */ +#define WIDGET_ERR_UPPER_ADDR_ONLY 0x0000ffff + +/* WIDGET_CONTROL */ +#define WIDGET_F_BAD_PKT 0x00010000 +#define WIDGET_LLP_XBAR_CRD 0x0000f000 +#define WIDGET_LLP_XBAR_CRD_SHFT 12 +#define WIDGET_CLR_RLLP_CNT 0x00000800 +#define WIDGET_CLR_TLLP_CNT 0x00000400 +#define WIDGET_SYS_END 0x00000200 +#define WIDGET_MAX_TRANS 0x000001f0 +#define WIDGET_WIDGET_ID 0x0000000f + +/* WIDGET_INTDEST_UPPER_ADDR */ +#define WIDGET_INT_VECTOR 0xff000000 +#define WIDGET_INT_VECTOR_SHFT 24 +#define WIDGET_TARGET_ID 0x000f0000 +#define WIDGET_TARGET_ID_SHFT 16 +#define WIDGET_UPP_ADDR 0x0000ffff + +/* WIDGET_ERR_CMD_WORD */ +#define WIDGET_DIDN 0xf0000000 +#define WIDGET_SIDN 0x0f000000 +#define WIDGET_PACTYP 0x00f00000 +#define WIDGET_TNUM 0x000f8000 +#define WIDGET_COHERENT 0x00004000 +#define WIDGET_DS 0x00003000 +#define WIDGET_GBR 0x00000800 +#define WIDGET_VBPM 0x00000400 +#define WIDGET_ERROR 0x00000200 +#define WIDGET_BARRIER 0x00000100 + +/* WIDGET_LLP_CFG */ +#define WIDGET_LLP_MAXRETRY 0x03ff0000 +#define WIDGET_LLP_MAXRETRY_SHFT 16 +#define WIDGET_LLP_NULLTIMEOUT 0x0000fc00 +#define WIDGET_LLP_NULLTIMEOUT_SHFT 10 +#define WIDGET_LLP_MAXBURST 0x000003ff +#define WIDGET_LLP_MAXBURST_SHFT 0 + +/* + * according to the crosstalk spec, only 32-bits access to the widget + * configuration registers is allowed. some widgets may allow 64-bits + * access but software should not depend on it. registers beyond the + * widget target flush register are widget dependent thus will not be + * defined here + */ +#ifndef __ASSEMBLY__ +typedef u32 widgetreg_t; + +/* widget configuration registers */ +typedef volatile struct widget_cfg { + widgetreg_t w_pad_0; /* 0x00 */ + widgetreg_t w_id; /* 0x04 */ + widgetreg_t w_pad_1; /* 0x08 */ + widgetreg_t w_status; /* 0x0c */ + widgetreg_t w_pad_2; /* 0x10 */ + widgetreg_t w_err_upper_addr; /* 0x14 */ + widgetreg_t w_pad_3; /* 0x18 */ + widgetreg_t w_err_lower_addr; /* 0x1c */ + widgetreg_t w_pad_4; /* 0x20 */ + widgetreg_t w_control; /* 0x24 */ + widgetreg_t w_pad_5; /* 0x28 */ + widgetreg_t w_req_timeout; /* 0x2c */ + widgetreg_t w_pad_6; /* 0x30 */ + widgetreg_t w_intdest_upper_addr; /* 0x34 */ + widgetreg_t w_pad_7; /* 0x38 */ + widgetreg_t w_intdest_lower_addr; /* 0x3c */ + widgetreg_t w_pad_8; /* 0x40 */ + widgetreg_t w_err_cmd_word; /* 0x44 */ + widgetreg_t w_pad_9; /* 0x48 */ + widgetreg_t w_llp_cfg; /* 0x4c */ + widgetreg_t w_pad_10; /* 0x50 */ + widgetreg_t w_tflush; /* 0x54 */ +} widget_cfg_t; + +typedef struct { + unsigned didn:4; + unsigned sidn:4; + unsigned pactyp:4; + unsigned tnum:5; + unsigned ct:1; + unsigned ds:2; + unsigned gbr:1; + unsigned vbpm:1; + unsigned error:1; + unsigned bo:1; + unsigned other:8; +} w_err_cmd_word_f; + +typedef union { + widgetreg_t r; + w_err_cmd_word_f f; +} w_err_cmd_word_u; + +typedef struct xwidget_info_s *xwidget_info_t; + +/* + * Crosstalk Widget Hardware Identification, as defined in the Crosstalk spec. + */ +typedef struct xwidget_hwid_s { + xwidget_part_num_t part_num; + xwidget_rev_num_t rev_num; + xwidget_mfg_num_t mfg_num; +} *xwidget_hwid_t; + + +/* + * Returns 1 if a driver that handles devices described by hwid1 is able + * to manage a device with hardwareid hwid2. NOTE: We don't check rev + * numbers at all. + */ +#define XWIDGET_HARDWARE_ID_MATCH(hwid1, hwid2) \ + (((hwid1)->part_num == (hwid2)->part_num) && \ + (((hwid1)->mfg_num == XWIDGET_MFG_NUM_NONE) || \ + ((hwid2)->mfg_num == XWIDGET_MFG_NUM_NONE) || \ + ((hwid1)->mfg_num == (hwid2)->mfg_num))) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_XTALK_XWIDGET_H */ diff --git a/include/asm-mips/Kbuild b/include/asm-mips/Kbuild deleted file mode 100644 index 7897f05e3165..000000000000 --- a/include/asm-mips/Kbuild +++ /dev/null @@ -1,3 +0,0 @@ -include include/asm-generic/Kbuild.asm - -header-y += cachectl.h sgidefs.h sysmips.h diff --git a/include/asm-mips/a.out.h b/include/asm-mips/a.out.h deleted file mode 100644 index cad8371422ab..000000000000 --- a/include/asm-mips/a.out.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 - 1999, 2003 by Ralf Baechle - */ -#ifndef _ASM_A_OUT_H -#define _ASM_A_OUT_H - -#ifdef __KERNEL__ - - -#endif - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for - file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, - in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in - bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#endif /* _ASM_A_OUT_H */ diff --git a/include/asm-mips/abi.h b/include/asm-mips/abi.h deleted file mode 100644 index 1dd74fbdc09b..000000000000 --- a/include/asm-mips/abi.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005, 06 by Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2005 MIPS Technologies, Inc. - */ -#ifndef _ASM_ABI_H -#define _ASM_ABI_H - -#include -#include - -struct mips_abi { - int (* const setup_frame)(struct k_sigaction * ka, - struct pt_regs *regs, int signr, - sigset_t *set); - int (* const setup_rt_frame)(struct k_sigaction * ka, - struct pt_regs *regs, int signr, - sigset_t *set, siginfo_t *info); - const unsigned long restart; -}; - -#endif /* _ASM_ABI_H */ diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h deleted file mode 100644 index 569f80aacbd2..000000000000 --- a/include/asm-mips/addrspace.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 99 Ralf Baechle - * Copyright (C) 2000, 2002 Maciej W. Rozycki - * Copyright (C) 1990, 1999 by Silicon Graphics, Inc. - */ -#ifndef _ASM_ADDRSPACE_H -#define _ASM_ADDRSPACE_H - -#include - -/* - * Configure language - */ -#ifdef __ASSEMBLY__ -#define _ATYPE_ -#define _ATYPE32_ -#define _ATYPE64_ -#define _CONST64_(x) x -#else -#define _ATYPE_ __PTRDIFF_TYPE__ -#define _ATYPE32_ int -#define _ATYPE64_ __s64 -#ifdef CONFIG_64BIT -#define _CONST64_(x) x ## L -#else -#define _CONST64_(x) x ## LL -#endif -#endif - -/* - * 32-bit MIPS address spaces - */ -#ifdef __ASSEMBLY__ -#define _ACAST32_ -#define _ACAST64_ -#else -#define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ -#define _ACAST64_ (_ATYPE64_) /* do _not_ narrow */ -#endif - -/* - * Returns the kernel segment base of a given address - */ -#define KSEGX(a) ((_ACAST32_ (a)) & 0xe0000000) - -/* - * Returns the physical address of a CKSEGx / XKPHYS address - */ -#define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) -#define XPHYSADDR(a) ((_ACAST64_(a)) & \ - _CONST64_(0x000000ffffffffff)) - -#ifdef CONFIG_64BIT - -/* - * Memory segments (64bit kernel mode addresses) - * The compatibility segments use the full 64-bit sign extended value. Note - * the R8000 doesn't have them so don't reference these in generic MIPS code. - */ -#define XKUSEG _CONST64_(0x0000000000000000) -#define XKSSEG _CONST64_(0x4000000000000000) -#define XKPHYS _CONST64_(0x8000000000000000) -#define XKSEG _CONST64_(0xc000000000000000) -#define CKSEG0 _CONST64_(0xffffffff80000000) -#define CKSEG1 _CONST64_(0xffffffffa0000000) -#define CKSSEG _CONST64_(0xffffffffc0000000) -#define CKSEG3 _CONST64_(0xffffffffe0000000) - -#define CKSEG0ADDR(a) (CPHYSADDR(a) | CKSEG0) -#define CKSEG1ADDR(a) (CPHYSADDR(a) | CKSEG1) -#define CKSEG2ADDR(a) (CPHYSADDR(a) | CKSEG2) -#define CKSEG3ADDR(a) (CPHYSADDR(a) | CKSEG3) - -#else - -#define CKSEG0ADDR(a) (CPHYSADDR(a) | KSEG0) -#define CKSEG1ADDR(a) (CPHYSADDR(a) | KSEG1) -#define CKSEG2ADDR(a) (CPHYSADDR(a) | KSEG2) -#define CKSEG3ADDR(a) (CPHYSADDR(a) | KSEG3) - -/* - * Map an address to a certain kernel segment - */ -#define KSEG0ADDR(a) (CPHYSADDR(a) | KSEG0) -#define KSEG1ADDR(a) (CPHYSADDR(a) | KSEG1) -#define KSEG2ADDR(a) (CPHYSADDR(a) | KSEG2) -#define KSEG3ADDR(a) (CPHYSADDR(a) | KSEG3) - -/* - * Memory segments (32bit kernel mode addresses) - * These are the traditional names used in the 32-bit universe. - */ -#define KUSEG 0x00000000 -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 -#define KSEG2 0xc0000000 -#define KSEG3 0xe0000000 - -#define CKUSEG 0x00000000 -#define CKSEG0 0x80000000 -#define CKSEG1 0xa0000000 -#define CKSEG2 0xc0000000 -#define CKSEG3 0xe0000000 - -#endif - -/* - * Cache modes for XKPHYS address conversion macros - */ -#define K_CALG_COH_EXCL1_NOL2 0 -#define K_CALG_COH_SHRL1_NOL2 1 -#define K_CALG_UNCACHED 2 -#define K_CALG_NONCOHERENT 3 -#define K_CALG_COH_EXCL 4 -#define K_CALG_COH_SHAREABLE 5 -#define K_CALG_NOTUSED 6 -#define K_CALG_UNCACHED_ACCEL 7 - -/* - * 64-bit address conversions - */ -#define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p)) -#define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p)) -#define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK) -#define PHYS_TO_XKPHYS(cm, a) (_CONST64_(0x8000000000000000) | \ - (_CONST64_(cm) << 59) | (a)) - -/* - * The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting - * the region, 3 bits for the CCA mode. This leaves 59 bits of which the - * R8000 implements most with its 48-bit physical address space. - */ -#define TO_PHYS_MASK _CONST64_(0x07ffffffffffffff) /* 2^^59 - 1 */ - -#ifndef CONFIG_CPU_R8000 - -/* - * The R8000 doesn't have the 32-bit compat spaces so we don't define them - * in order to catch bugs in the source code. - */ - -#define COMPAT_K1BASE32 _CONST64_(0xffffffffa0000000) -#define PHYS_TO_COMPATK1(x) ((x) | COMPAT_K1BASE32) /* 32-bit compat k1 */ - -#endif - -#define KDM_TO_PHYS(x) (_ACAST64_ (x) & TO_PHYS_MASK) -#define PHYS_TO_K0(x) (_ACAST64_ (x) | CAC_BASE) - -#endif /* _ASM_ADDRSPACE_H */ diff --git a/include/asm-mips/asm.h b/include/asm-mips/asm.h deleted file mode 100644 index 608cfcfbb3ea..000000000000 --- a/include/asm-mips/asm.h +++ /dev/null @@ -1,409 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle - * Copyright (C) 1999 by Silicon Graphics, Inc. - * Copyright (C) 2001 MIPS Technologies, Inc. - * Copyright (C) 2002 Maciej W. Rozycki - * - * Some useful macros for MIPS assembler code - * - * Some of the routines below contain useless nops that will be optimized - * away by gas in -O mode. These nops are however required to fill delay - * slots in noreorder mode. - */ -#ifndef __ASM_ASM_H -#define __ASM_ASM_H - -#include - -#ifndef CAT -#ifdef __STDC__ -#define __CAT(str1, str2) str1##str2 -#else -#define __CAT(str1, str2) str1/**/str2 -#endif -#define CAT(str1, str2) __CAT(str1, str2) -#endif - -/* - * PIC specific declarations - * Not used for the kernel but here seems to be the right place. - */ -#ifdef __PIC__ -#define CPRESTORE(register) \ - .cprestore register -#define CPADD(register) \ - .cpadd register -#define CPLOAD(register) \ - .cpload register -#else -#define CPRESTORE(register) -#define CPADD(register) -#define CPLOAD(register) -#endif - -/* - * LEAF - declare leaf routine - */ -#define LEAF(symbol) \ - .globl symbol; \ - .align 2; \ - .type symbol, @function; \ - .ent symbol, 0; \ -symbol: .frame sp, 0, ra - -/* - * NESTED - declare nested routine entry point - */ -#define NESTED(symbol, framesize, rpc) \ - .globl symbol; \ - .align 2; \ - .type symbol, @function; \ - .ent symbol, 0; \ -symbol: .frame sp, framesize, rpc - -/* - * END - mark end of function - */ -#define END(function) \ - .end function; \ - .size function, .-function - -/* - * EXPORT - export definition of symbol - */ -#define EXPORT(symbol) \ - .globl symbol; \ -symbol: - -/* - * FEXPORT - export definition of a function symbol - */ -#define FEXPORT(symbol) \ - .globl symbol; \ - .type symbol, @function; \ -symbol: - -/* - * ABS - export absolute symbol - */ -#define ABS(symbol,value) \ - .globl symbol; \ -symbol = value - -#define PANIC(msg) \ - .set push; \ - .set reorder; \ - PTR_LA a0, 8f; \ - jal panic; \ -9: b 9b; \ - .set pop; \ - TEXT(msg) - -/* - * Print formatted string - */ -#ifdef CONFIG_PRINTK -#define PRINT(string) \ - .set push; \ - .set reorder; \ - PTR_LA a0, 8f; \ - jal printk; \ - .set pop; \ - TEXT(string) -#else -#define PRINT(string) -#endif - -#define TEXT(msg) \ - .pushsection .data; \ -8: .asciiz msg; \ - .popsection; - -/* - * Build text tables - */ -#define TTABLE(string) \ - .pushsection .text; \ - .word 1f; \ - .popsection \ - .pushsection .data; \ -1: .asciiz string; \ - .popsection - -/* - * MIPS IV pref instruction. - * Use with .set noreorder only! - * - * MIPS IV implementations are free to treat this as a nop. The R5000 - * is one of them. So we should have an option not to use this instruction. - */ -#ifdef CONFIG_CPU_HAS_PREFETCH - -#define PREF(hint,addr) \ - .set push; \ - .set mips4; \ - pref hint, addr; \ - .set pop - -#define PREFX(hint,addr) \ - .set push; \ - .set mips4; \ - prefx hint, addr; \ - .set pop - -#else /* !CONFIG_CPU_HAS_PREFETCH */ - -#define PREF(hint, addr) -#define PREFX(hint, addr) - -#endif /* !CONFIG_CPU_HAS_PREFETCH */ - -/* - * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs. - */ -#if (_MIPS_ISA == _MIPS_ISA_MIPS1) -#define MOVN(rd, rs, rt) \ - .set push; \ - .set reorder; \ - beqz rt, 9f; \ - move rd, rs; \ - .set pop; \ -9: -#define MOVZ(rd, rs, rt) \ - .set push; \ - .set reorder; \ - bnez rt, 9f; \ - move rd, rs; \ - .set pop; \ -9: -#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */ -#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) -#define MOVN(rd, rs, rt) \ - .set push; \ - .set noreorder; \ - bnezl rt, 9f; \ - move rd, rs; \ - .set pop; \ -9: -#define MOVZ(rd, rs, rt) \ - .set push; \ - .set noreorder; \ - beqzl rt, 9f; \ - move rd, rs; \ - .set pop; \ -9: -#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */ -#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \ - (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64) -#define MOVN(rd, rs, rt) \ - movn rd, rs, rt -#define MOVZ(rd, rs, rt) \ - movz rd, rs, rt -#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */ - -/* - * Stack alignment - */ -#if (_MIPS_SIM == _MIPS_SIM_ABI32) -#define ALSZ 7 -#define ALMASK ~7 -#endif -#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) -#define ALSZ 15 -#define ALMASK ~15 -#endif - -/* - * Macros to handle different pointer/register sizes for 32/64-bit code - */ - -/* - * Size of a register - */ -#ifdef __mips64 -#define SZREG 8 -#else -#define SZREG 4 -#endif - -/* - * Use the following macros in assemblercode to load/store registers, - * pointers etc. - */ -#if (_MIPS_SIM == _MIPS_SIM_ABI32) -#define REG_S sw -#define REG_L lw -#define REG_SUBU subu -#define REG_ADDU addu -#endif -#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) -#define REG_S sd -#define REG_L ld -#define REG_SUBU dsubu -#define REG_ADDU daddu -#endif - -/* - * How to add/sub/load/store/shift C int variables. - */ -#if (_MIPS_SZINT == 32) -#define INT_ADD add -#define INT_ADDU addu -#define INT_ADDI addi -#define INT_ADDIU addiu -#define INT_SUB sub -#define INT_SUBU subu -#define INT_L lw -#define INT_S sw -#define INT_SLL sll -#define INT_SLLV sllv -#define INT_SRL srl -#define INT_SRLV srlv -#define INT_SRA sra -#define INT_SRAV srav -#endif - -#if (_MIPS_SZINT == 64) -#define INT_ADD dadd -#define INT_ADDU daddu -#define INT_ADDI daddi -#define INT_ADDIU daddiu -#define INT_SUB dsub -#define INT_SUBU dsubu -#define INT_L ld -#define INT_S sd -#define INT_SLL dsll -#define INT_SLLV dsllv -#define INT_SRL dsrl -#define INT_SRLV dsrlv -#define INT_SRA dsra -#define INT_SRAV dsrav -#endif - -/* - * How to add/sub/load/store/shift C long variables. - */ -#if (_MIPS_SZLONG == 32) -#define LONG_ADD add -#define LONG_ADDU addu -#define LONG_ADDI addi -#define LONG_ADDIU addiu -#define LONG_SUB sub -#define LONG_SUBU subu -#define LONG_L lw -#define LONG_S sw -#define LONG_SLL sll -#define LONG_SLLV sllv -#define LONG_SRL srl -#define LONG_SRLV srlv -#define LONG_SRA sra -#define LONG_SRAV srav - -#define LONG .word -#define LONGSIZE 4 -#define LONGMASK 3 -#define LONGLOG 2 -#endif - -#if (_MIPS_SZLONG == 64) -#define LONG_ADD dadd -#define LONG_ADDU daddu -#define LONG_ADDI daddi -#define LONG_ADDIU daddiu -#define LONG_SUB dsub -#define LONG_SUBU dsubu -#define LONG_L ld -#define LONG_S sd -#define LONG_SLL dsll -#define LONG_SLLV dsllv -#define LONG_SRL dsrl -#define LONG_SRLV dsrlv -#define LONG_SRA dsra -#define LONG_SRAV dsrav - -#define LONG .dword -#define LONGSIZE 8 -#define LONGMASK 7 -#define LONGLOG 3 -#endif - -/* - * How to add/sub/load/store/shift pointers. - */ -#if (_MIPS_SZPTR == 32) -#define PTR_ADD add -#define PTR_ADDU addu -#define PTR_ADDI addi -#define PTR_ADDIU addiu -#define PTR_SUB sub -#define PTR_SUBU subu -#define PTR_L lw -#define PTR_S sw -#define PTR_LA la -#define PTR_LI li -#define PTR_SLL sll -#define PTR_SLLV sllv -#define PTR_SRL srl -#define PTR_SRLV srlv -#define PTR_SRA sra -#define PTR_SRAV srav - -#define PTR_SCALESHIFT 2 - -#define PTR .word -#define PTRSIZE 4 -#define PTRLOG 2 -#endif - -#if (_MIPS_SZPTR == 64) -#define PTR_ADD dadd -#define PTR_ADDU daddu -#define PTR_ADDI daddi -#define PTR_ADDIU daddiu -#define PTR_SUB dsub -#define PTR_SUBU dsubu -#define PTR_L ld -#define PTR_S sd -#define PTR_LA dla -#define PTR_LI dli -#define PTR_SLL dsll -#define PTR_SLLV dsllv -#define PTR_SRL dsrl -#define PTR_SRLV dsrlv -#define PTR_SRA dsra -#define PTR_SRAV dsrav - -#define PTR_SCALESHIFT 3 - -#define PTR .dword -#define PTRSIZE 8 -#define PTRLOG 3 -#endif - -/* - * Some cp0 registers were extended to 64bit for MIPS III. - */ -#if (_MIPS_SIM == _MIPS_SIM_ABI32) -#define MFC0 mfc0 -#define MTC0 mtc0 -#endif -#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) -#define MFC0 dmfc0 -#define MTC0 dmtc0 -#endif - -#define SSNOP sll zero, zero, 1 - -#ifdef CONFIG_SGI_IP28 -/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */ -#include -#define R10KCBARRIER(addr) cache Cache_Barrier, addr; -#else -#define R10KCBARRIER(addr) -#endif - -#endif /* __ASM_ASM_H */ diff --git a/include/asm-mips/asmmacro-32.h b/include/asm-mips/asmmacro-32.h deleted file mode 100644 index 5de3963f511e..000000000000 --- a/include/asm-mips/asmmacro-32.h +++ /dev/null @@ -1,158 +0,0 @@ -/* - * asmmacro.h: Assembler macros to make things easier to read. - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - * Copyright (C) 1998, 1999, 2003 Ralf Baechle - */ -#ifndef _ASM_ASMMACRO_32_H -#define _ASM_ASMMACRO_32_H - -#include -#include -#include -#include - - .macro fpu_save_double thread status tmp1=t0 - cfc1 \tmp1, fcr31 - sdc1 $f0, THREAD_FPR0(\thread) - sdc1 $f2, THREAD_FPR2(\thread) - sdc1 $f4, THREAD_FPR4(\thread) - sdc1 $f6, THREAD_FPR6(\thread) - sdc1 $f8, THREAD_FPR8(\thread) - sdc1 $f10, THREAD_FPR10(\thread) - sdc1 $f12, THREAD_FPR12(\thread) - sdc1 $f14, THREAD_FPR14(\thread) - sdc1 $f16, THREAD_FPR16(\thread) - sdc1 $f18, THREAD_FPR18(\thread) - sdc1 $f20, THREAD_FPR20(\thread) - sdc1 $f22, THREAD_FPR22(\thread) - sdc1 $f24, THREAD_FPR24(\thread) - sdc1 $f26, THREAD_FPR26(\thread) - sdc1 $f28, THREAD_FPR28(\thread) - sdc1 $f30, THREAD_FPR30(\thread) - sw \tmp1, THREAD_FCR31(\thread) - .endm - - .macro fpu_save_single thread tmp=t0 - cfc1 \tmp, fcr31 - swc1 $f0, THREAD_FPR0(\thread) - swc1 $f1, THREAD_FPR1(\thread) - swc1 $f2, THREAD_FPR2(\thread) - swc1 $f3, THREAD_FPR3(\thread) - swc1 $f4, THREAD_FPR4(\thread) - swc1 $f5, THREAD_FPR5(\thread) - swc1 $f6, THREAD_FPR6(\thread) - swc1 $f7, THREAD_FPR7(\thread) - swc1 $f8, THREAD_FPR8(\thread) - swc1 $f9, THREAD_FPR9(\thread) - swc1 $f10, THREAD_FPR10(\thread) - swc1 $f11, THREAD_FPR11(\thread) - swc1 $f12, THREAD_FPR12(\thread) - swc1 $f13, THREAD_FPR13(\thread) - swc1 $f14, THREAD_FPR14(\thread) - swc1 $f15, THREAD_FPR15(\thread) - swc1 $f16, THREAD_FPR16(\thread) - swc1 $f17, THREAD_FPR17(\thread) - swc1 $f18, THREAD_FPR18(\thread) - swc1 $f19, THREAD_FPR19(\thread) - swc1 $f20, THREAD_FPR20(\thread) - swc1 $f21, THREAD_FPR21(\thread) - swc1 $f22, THREAD_FPR22(\thread) - swc1 $f23, THREAD_FPR23(\thread) - swc1 $f24, THREAD_FPR24(\thread) - swc1 $f25, THREAD_FPR25(\thread) - swc1 $f26, THREAD_FPR26(\thread) - swc1 $f27, THREAD_FPR27(\thread) - swc1 $f28, THREAD_FPR28(\thread) - swc1 $f29, THREAD_FPR29(\thread) - swc1 $f30, THREAD_FPR30(\thread) - swc1 $f31, THREAD_FPR31(\thread) - sw \tmp, THREAD_FCR31(\thread) - .endm - - .macro fpu_restore_double thread status tmp=t0 - lw \tmp, THREAD_FCR31(\thread) - ldc1 $f0, THREAD_FPR0(\thread) - ldc1 $f2, THREAD_FPR2(\thread) - ldc1 $f4, THREAD_FPR4(\thread) - ldc1 $f6, THREAD_FPR6(\thread) - ldc1 $f8, THREAD_FPR8(\thread) - ldc1 $f10, THREAD_FPR10(\thread) - ldc1 $f12, THREAD_FPR12(\thread) - ldc1 $f14, THREAD_FPR14(\thread) - ldc1 $f16, THREAD_FPR16(\thread) - ldc1 $f18, THREAD_FPR18(\thread) - ldc1 $f20, THREAD_FPR20(\thread) - ldc1 $f22, THREAD_FPR22(\thread) - ldc1 $f24, THREAD_FPR24(\thread) - ldc1 $f26, THREAD_FPR26(\thread) - ldc1 $f28, THREAD_FPR28(\thread) - ldc1 $f30, THREAD_FPR30(\thread) - ctc1 \tmp, fcr31 - .endm - - .macro fpu_restore_single thread tmp=t0 - lw \tmp, THREAD_FCR31(\thread) - lwc1 $f0, THREAD_FPR0(\thread) - lwc1 $f1, THREAD_FPR1(\thread) - lwc1 $f2, THREAD_FPR2(\thread) - lwc1 $f3, THREAD_FPR3(\thread) - lwc1 $f4, THREAD_FPR4(\thread) - lwc1 $f5, THREAD_FPR5(\thread) - lwc1 $f6, THREAD_FPR6(\thread) - lwc1 $f7, THREAD_FPR7(\thread) - lwc1 $f8, THREAD_FPR8(\thread) - lwc1 $f9, THREAD_FPR9(\thread) - lwc1 $f10, THREAD_FPR10(\thread) - lwc1 $f11, THREAD_FPR11(\thread) - lwc1 $f12, THREAD_FPR12(\thread) - lwc1 $f13, THREAD_FPR13(\thread) - lwc1 $f14, THREAD_FPR14(\thread) - lwc1 $f15, THREAD_FPR15(\thread) - lwc1 $f16, THREAD_FPR16(\thread) - lwc1 $f17, THREAD_FPR17(\thread) - lwc1 $f18, THREAD_FPR18(\thread) - lwc1 $f19, THREAD_FPR19(\thread) - lwc1 $f20, THREAD_FPR20(\thread) - lwc1 $f21, THREAD_FPR21(\thread) - lwc1 $f22, THREAD_FPR22(\thread) - lwc1 $f23, THREAD_FPR23(\thread) - lwc1 $f24, THREAD_FPR24(\thread) - lwc1 $f25, THREAD_FPR25(\thread) - lwc1 $f26, THREAD_FPR26(\thread) - lwc1 $f27, THREAD_FPR27(\thread) - lwc1 $f28, THREAD_FPR28(\thread) - lwc1 $f29, THREAD_FPR29(\thread) - lwc1 $f30, THREAD_FPR30(\thread) - lwc1 $f31, THREAD_FPR31(\thread) - ctc1 \tmp, fcr31 - .endm - - .macro cpu_save_nonscratch thread - LONG_S s0, THREAD_REG16(\thread) - LONG_S s1, THREAD_REG17(\thread) - LONG_S s2, THREAD_REG18(\thread) - LONG_S s3, THREAD_REG19(\thread) - LONG_S s4, THREAD_REG20(\thread) - LONG_S s5, THREAD_REG21(\thread) - LONG_S s6, THREAD_REG22(\thread) - LONG_S s7, THREAD_REG23(\thread) - LONG_S sp, THREAD_REG29(\thread) - LONG_S fp, THREAD_REG30(\thread) - .endm - - .macro cpu_restore_nonscratch thread - LONG_L s0, THREAD_REG16(\thread) - LONG_L s1, THREAD_REG17(\thread) - LONG_L s2, THREAD_REG18(\thread) - LONG_L s3, THREAD_REG19(\thread) - LONG_L s4, THREAD_REG20(\thread) - LONG_L s5, THREAD_REG21(\thread) - LONG_L s6, THREAD_REG22(\thread) - LONG_L s7, THREAD_REG23(\thread) - LONG_L sp, THREAD_REG29(\thread) - LONG_L fp, THREAD_REG30(\thread) - LONG_L ra, THREAD_REG31(\thread) - .endm - -#endif /* _ASM_ASMMACRO_32_H */ diff --git a/include/asm-mips/asmmacro-64.h b/include/asm-mips/asmmacro-64.h deleted file mode 100644 index 225feefcb25d..000000000000 --- a/include/asm-mips/asmmacro-64.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * asmmacro.h: Assembler macros to make things easier to read. - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - * Copyright (C) 1998, 1999 Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_ASMMACRO_64_H -#define _ASM_ASMMACRO_64_H - -#include -#include -#include -#include - - .macro fpu_save_16even thread tmp=t0 - cfc1 \tmp, fcr31 - sdc1 $f0, THREAD_FPR0(\thread) - sdc1 $f2, THREAD_FPR2(\thread) - sdc1 $f4, THREAD_FPR4(\thread) - sdc1 $f6, THREAD_FPR6(\thread) - sdc1 $f8, THREAD_FPR8(\thread) - sdc1 $f10, THREAD_FPR10(\thread) - sdc1 $f12, THREAD_FPR12(\thread) - sdc1 $f14, THREAD_FPR14(\thread) - sdc1 $f16, THREAD_FPR16(\thread) - sdc1 $f18, THREAD_FPR18(\thread) - sdc1 $f20, THREAD_FPR20(\thread) - sdc1 $f22, THREAD_FPR22(\thread) - sdc1 $f24, THREAD_FPR24(\thread) - sdc1 $f26, THREAD_FPR26(\thread) - sdc1 $f28, THREAD_FPR28(\thread) - sdc1 $f30, THREAD_FPR30(\thread) - sw \tmp, THREAD_FCR31(\thread) - .endm - - .macro fpu_save_16odd thread - sdc1 $f1, THREAD_FPR1(\thread) - sdc1 $f3, THREAD_FPR3(\thread) - sdc1 $f5, THREAD_FPR5(\thread) - sdc1 $f7, THREAD_FPR7(\thread) - sdc1 $f9, THREAD_FPR9(\thread) - sdc1 $f11, THREAD_FPR11(\thread) - sdc1 $f13, THREAD_FPR13(\thread) - sdc1 $f15, THREAD_FPR15(\thread) - sdc1 $f17, THREAD_FPR17(\thread) - sdc1 $f19, THREAD_FPR19(\thread) - sdc1 $f21, THREAD_FPR21(\thread) - sdc1 $f23, THREAD_FPR23(\thread) - sdc1 $f25, THREAD_FPR25(\thread) - sdc1 $f27, THREAD_FPR27(\thread) - sdc1 $f29, THREAD_FPR29(\thread) - sdc1 $f31, THREAD_FPR31(\thread) - .endm - - .macro fpu_save_double thread status tmp - sll \tmp, \status, 5 - bgez \tmp, 2f - fpu_save_16odd \thread -2: - fpu_save_16even \thread \tmp - .endm - - .macro fpu_restore_16even thread tmp=t0 - lw \tmp, THREAD_FCR31(\thread) - ldc1 $f0, THREAD_FPR0(\thread) - ldc1 $f2, THREAD_FPR2(\thread) - ldc1 $f4, THREAD_FPR4(\thread) - ldc1 $f6, THREAD_FPR6(\thread) - ldc1 $f8, THREAD_FPR8(\thread) - ldc1 $f10, THREAD_FPR10(\thread) - ldc1 $f12, THREAD_FPR12(\thread) - ldc1 $f14, THREAD_FPR14(\thread) - ldc1 $f16, THREAD_FPR16(\thread) - ldc1 $f18, THREAD_FPR18(\thread) - ldc1 $f20, THREAD_FPR20(\thread) - ldc1 $f22, THREAD_FPR22(\thread) - ldc1 $f24, THREAD_FPR24(\thread) - ldc1 $f26, THREAD_FPR26(\thread) - ldc1 $f28, THREAD_FPR28(\thread) - ldc1 $f30, THREAD_FPR30(\thread) - ctc1 \tmp, fcr31 - .endm - - .macro fpu_restore_16odd thread - ldc1 $f1, THREAD_FPR1(\thread) - ldc1 $f3, THREAD_FPR3(\thread) - ldc1 $f5, THREAD_FPR5(\thread) - ldc1 $f7, THREAD_FPR7(\thread) - ldc1 $f9, THREAD_FPR9(\thread) - ldc1 $f11, THREAD_FPR11(\thread) - ldc1 $f13, THREAD_FPR13(\thread) - ldc1 $f15, THREAD_FPR15(\thread) - ldc1 $f17, THREAD_FPR17(\thread) - ldc1 $f19, THREAD_FPR19(\thread) - ldc1 $f21, THREAD_FPR21(\thread) - ldc1 $f23, THREAD_FPR23(\thread) - ldc1 $f25, THREAD_FPR25(\thread) - ldc1 $f27, THREAD_FPR27(\thread) - ldc1 $f29, THREAD_FPR29(\thread) - ldc1 $f31, THREAD_FPR31(\thread) - .endm - - .macro fpu_restore_double thread status tmp - sll \tmp, \status, 5 - bgez \tmp, 1f # 16 register mode? - - fpu_restore_16odd \thread -1: fpu_restore_16even \thread \tmp - .endm - - .macro cpu_save_nonscratch thread - LONG_S s0, THREAD_REG16(\thread) - LONG_S s1, THREAD_REG17(\thread) - LONG_S s2, THREAD_REG18(\thread) - LONG_S s3, THREAD_REG19(\thread) - LONG_S s4, THREAD_REG20(\thread) - LONG_S s5, THREAD_REG21(\thread) - LONG_S s6, THREAD_REG22(\thread) - LONG_S s7, THREAD_REG23(\thread) - LONG_S sp, THREAD_REG29(\thread) - LONG_S fp, THREAD_REG30(\thread) - .endm - - .macro cpu_restore_nonscratch thread - LONG_L s0, THREAD_REG16(\thread) - LONG_L s1, THREAD_REG17(\thread) - LONG_L s2, THREAD_REG18(\thread) - LONG_L s3, THREAD_REG19(\thread) - LONG_L s4, THREAD_REG20(\thread) - LONG_L s5, THREAD_REG21(\thread) - LONG_L s6, THREAD_REG22(\thread) - LONG_L s7, THREAD_REG23(\thread) - LONG_L sp, THREAD_REG29(\thread) - LONG_L fp, THREAD_REG30(\thread) - LONG_L ra, THREAD_REG31(\thread) - .endm - -#endif /* _ASM_ASMMACRO_64_H */ diff --git a/include/asm-mips/asmmacro.h b/include/asm-mips/asmmacro.h deleted file mode 100644 index 7a881755800f..000000000000 --- a/include/asm-mips/asmmacro.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Ralf Baechle - */ -#ifndef _ASM_ASMMACRO_H -#define _ASM_ASMMACRO_H - -#include - -#ifdef CONFIG_32BIT -#include -#endif -#ifdef CONFIG_64BIT -#include -#endif -#ifdef CONFIG_MIPS_MT_SMTC -#include -#endif - -#ifdef CONFIG_MIPS_MT_SMTC - .macro local_irq_enable reg=t0 - mfc0 \reg, CP0_TCSTATUS - ori \reg, \reg, TCSTATUS_IXMT - xori \reg, \reg, TCSTATUS_IXMT - mtc0 \reg, CP0_TCSTATUS - _ehb - .endm - - .macro local_irq_disable reg=t0 - mfc0 \reg, CP0_TCSTATUS - ori \reg, \reg, TCSTATUS_IXMT - mtc0 \reg, CP0_TCSTATUS - _ehb - .endm -#else - .macro local_irq_enable reg=t0 - mfc0 \reg, CP0_STATUS - ori \reg, \reg, 1 - mtc0 \reg, CP0_STATUS - irq_enable_hazard - .endm - - .macro local_irq_disable reg=t0 - mfc0 \reg, CP0_STATUS - ori \reg, \reg, 1 - xori \reg, \reg, 1 - mtc0 \reg, CP0_STATUS - irq_disable_hazard - .endm -#endif /* CONFIG_MIPS_MT_SMTC */ - -/* - * Temporary until all gas have MT ASE support - */ - .macro DMT reg=0 - .word 0x41600bc1 | (\reg << 16) - .endm - - .macro EMT reg=0 - .word 0x41600be1 | (\reg << 16) - .endm - - .macro DVPE reg=0 - .word 0x41600001 | (\reg << 16) - .endm - - .macro EVPE reg=0 - .word 0x41600021 | (\reg << 16) - .endm - - .macro MFTR rt=0, rd=0, u=0, sel=0 - .word 0x41000000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel) - .endm - - .macro MTTR rt=0, rd=0, u=0, sel=0 - .word 0x41800000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel) - .endm - -#endif /* _ASM_ASMMACRO_H */ diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h deleted file mode 100644 index 1232be3885b0..000000000000 --- a/include/asm-mips/atomic.h +++ /dev/null @@ -1,801 +0,0 @@ -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - * - * But use these as seldom as possible since they are much more slower - * than regular operations. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 97, 99, 2000, 03, 04, 06 by Ralf Baechle - */ -#ifndef _ASM_ATOMIC_H -#define _ASM_ATOMIC_H - -#include -#include -#include -#include -#include - -typedef struct { volatile int counter; } atomic_t; - -#define ATOMIC_INIT(i) { (i) } - -/* - * atomic_read - read atomic variable - * @v: pointer of type atomic_t - * - * Atomically reads the value of @v. - */ -#define atomic_read(v) ((v)->counter) - -/* - * atomic_set - set atomic variable - * @v: pointer of type atomic_t - * @i: required value - * - * Atomically sets the value of @v to @i. - */ -#define atomic_set(v, i) ((v)->counter = (i)) - -/* - * atomic_add - add integer to atomic variable - * @i: integer value to add - * @v: pointer of type atomic_t - * - * Atomically adds @i to @v. - */ -static __inline__ void atomic_add(int i, atomic_t * v) -{ - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: ll %0, %1 # atomic_add \n" - " addu %0, %2 \n" - " sc %0, %1 \n" - " beqzl %0, 1b \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter)); - } else if (cpu_has_llsc) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: ll %0, %1 # atomic_add \n" - " addu %0, %2 \n" - " sc %0, %1 \n" - " beqz %0, 2f \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter)); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - v->counter += i; - raw_local_irq_restore(flags); - } -} - -/* - * atomic_sub - subtract the atomic variable - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v. - */ -static __inline__ void atomic_sub(int i, atomic_t * v) -{ - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: ll %0, %1 # atomic_sub \n" - " subu %0, %2 \n" - " sc %0, %1 \n" - " beqzl %0, 1b \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter)); - } else if (cpu_has_llsc) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: ll %0, %1 # atomic_sub \n" - " subu %0, %2 \n" - " sc %0, %1 \n" - " beqz %0, 2f \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter)); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - v->counter -= i; - raw_local_irq_restore(flags); - } -} - -/* - * Same as above, but return the result value - */ -static __inline__ int atomic_add_return(int i, atomic_t * v) -{ - unsigned long result; - - smp_llsc_mb(); - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: ll %1, %2 # atomic_add_return \n" - " addu %0, %1, %3 \n" - " sc %0, %2 \n" - " beqzl %0, 1b \n" - " addu %0, %1, %3 \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: ll %1, %2 # atomic_add_return \n" - " addu %0, %1, %3 \n" - " sc %0, %2 \n" - " beqz %0, 2f \n" - " addu %0, %1, %3 \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter) - : "memory"); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - result = v->counter; - result += i; - v->counter = result; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return result; -} - -static __inline__ int atomic_sub_return(int i, atomic_t * v) -{ - unsigned long result; - - smp_llsc_mb(); - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: ll %1, %2 # atomic_sub_return \n" - " subu %0, %1, %3 \n" - " sc %0, %2 \n" - " beqzl %0, 1b \n" - " subu %0, %1, %3 \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: ll %1, %2 # atomic_sub_return \n" - " subu %0, %1, %3 \n" - " sc %0, %2 \n" - " beqz %0, 2f \n" - " subu %0, %1, %3 \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter) - : "memory"); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - result = v->counter; - result -= i; - v->counter = result; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return result; -} - -/* - * atomic_sub_if_positive - conditionally subtract integer from atomic variable - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically test @v and subtract @i if @v is greater or equal than @i. - * The function returns the old value of @v minus @i. - */ -static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) -{ - unsigned long result; - - smp_llsc_mb(); - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: ll %1, %2 # atomic_sub_if_positive\n" - " subu %0, %1, %3 \n" - " bltz %0, 1f \n" - " sc %0, %2 \n" - " .set noreorder \n" - " beqzl %0, 1b \n" - " subu %0, %1, %3 \n" - " .set reorder \n" - "1: \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: ll %1, %2 # atomic_sub_if_positive\n" - " subu %0, %1, %3 \n" - " bltz %0, 1f \n" - " sc %0, %2 \n" - " .set noreorder \n" - " beqz %0, 2f \n" - " subu %0, %1, %3 \n" - " .set reorder \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - "1: \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter) - : "memory"); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - result = v->counter; - result -= i; - if (result >= 0) - v->counter = result; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return result; -} - -#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), (new))) - -/** - * atomic_add_unless - add unless the number is a given value - * @v: pointer of type atomic_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * Atomically adds @a to @v, so long as it was not @u. - * Returns non-zero if @v was not @u, and zero otherwise. - */ -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - c = atomic_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -#define atomic_dec_return(v) atomic_sub_return(1, (v)) -#define atomic_inc_return(v) atomic_add_return(1, (v)) - -/* - * atomic_sub_and_test - subtract value from variable and test result - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v and returns - * true if the result is zero, or false for all - * other cases. - */ -#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) - -/* - * atomic_dec_and_test - decrement by 1 and test - * @v: pointer of type atomic_t - * - * Atomically decrements @v by 1 and - * returns true if the result is 0, or false for all other - * cases. - */ -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) - -/* - * atomic_dec_if_positive - decrement by 1 if old value positive - * @v: pointer of type atomic_t - */ -#define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v) - -/* - * atomic_inc - increment atomic variable - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1. - */ -#define atomic_inc(v) atomic_add(1, (v)) - -/* - * atomic_dec - decrement and test - * @v: pointer of type atomic_t - * - * Atomically decrements @v by 1. - */ -#define atomic_dec(v) atomic_sub(1, (v)) - -/* - * atomic_add_negative - add and test if negative - * @v: pointer of type atomic_t - * @i: integer value to add - * - * Atomically adds @i to @v and returns true - * if the result is negative, or false when - * result is greater than or equal to zero. - */ -#define atomic_add_negative(i, v) (atomic_add_return(i, (v)) < 0) - -#ifdef CONFIG_64BIT - -typedef struct { volatile long counter; } atomic64_t; - -#define ATOMIC64_INIT(i) { (i) } - -/* - * atomic64_read - read atomic variable - * @v: pointer of type atomic64_t - * - */ -#define atomic64_read(v) ((v)->counter) - -/* - * atomic64_set - set atomic variable - * @v: pointer of type atomic64_t - * @i: required value - */ -#define atomic64_set(v, i) ((v)->counter = (i)) - -/* - * atomic64_add - add integer to atomic variable - * @i: integer value to add - * @v: pointer of type atomic64_t - * - * Atomically adds @i to @v. - */ -static __inline__ void atomic64_add(long i, atomic64_t * v) -{ - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: lld %0, %1 # atomic64_add \n" - " addu %0, %2 \n" - " scd %0, %1 \n" - " beqzl %0, 1b \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter)); - } else if (cpu_has_llsc) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: lld %0, %1 # atomic64_add \n" - " addu %0, %2 \n" - " scd %0, %1 \n" - " beqz %0, 2f \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter)); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - v->counter += i; - raw_local_irq_restore(flags); - } -} - -/* - * atomic64_sub - subtract the atomic variable - * @i: integer value to subtract - * @v: pointer of type atomic64_t - * - * Atomically subtracts @i from @v. - */ -static __inline__ void atomic64_sub(long i, atomic64_t * v) -{ - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: lld %0, %1 # atomic64_sub \n" - " subu %0, %2 \n" - " scd %0, %1 \n" - " beqzl %0, 1b \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter)); - } else if (cpu_has_llsc) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: lld %0, %1 # atomic64_sub \n" - " subu %0, %2 \n" - " scd %0, %1 \n" - " beqz %0, 2f \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter)); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - v->counter -= i; - raw_local_irq_restore(flags); - } -} - -/* - * Same as above, but return the result value - */ -static __inline__ long atomic64_add_return(long i, atomic64_t * v) -{ - unsigned long result; - - smp_llsc_mb(); - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: lld %1, %2 # atomic64_add_return \n" - " addu %0, %1, %3 \n" - " scd %0, %2 \n" - " beqzl %0, 1b \n" - " addu %0, %1, %3 \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: lld %1, %2 # atomic64_add_return \n" - " addu %0, %1, %3 \n" - " scd %0, %2 \n" - " beqz %0, 2f \n" - " addu %0, %1, %3 \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter) - : "memory"); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - result = v->counter; - result += i; - v->counter = result; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return result; -} - -static __inline__ long atomic64_sub_return(long i, atomic64_t * v) -{ - unsigned long result; - - smp_llsc_mb(); - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: lld %1, %2 # atomic64_sub_return \n" - " subu %0, %1, %3 \n" - " scd %0, %2 \n" - " beqzl %0, 1b \n" - " subu %0, %1, %3 \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: lld %1, %2 # atomic64_sub_return \n" - " subu %0, %1, %3 \n" - " scd %0, %2 \n" - " beqz %0, 2f \n" - " subu %0, %1, %3 \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter) - : "memory"); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - result = v->counter; - result -= i; - v->counter = result; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return result; -} - -/* - * atomic64_sub_if_positive - conditionally subtract integer from atomic variable - * @i: integer value to subtract - * @v: pointer of type atomic64_t - * - * Atomically test @v and subtract @i if @v is greater or equal than @i. - * The function returns the old value of @v minus @i. - */ -static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) -{ - unsigned long result; - - smp_llsc_mb(); - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: lld %1, %2 # atomic64_sub_if_positive\n" - " dsubu %0, %1, %3 \n" - " bltz %0, 1f \n" - " scd %0, %2 \n" - " .set noreorder \n" - " beqzl %0, 1b \n" - " dsubu %0, %1, %3 \n" - " .set reorder \n" - "1: \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: lld %1, %2 # atomic64_sub_if_positive\n" - " dsubu %0, %1, %3 \n" - " bltz %0, 1f \n" - " scd %0, %2 \n" - " .set noreorder \n" - " beqz %0, 2f \n" - " dsubu %0, %1, %3 \n" - " .set reorder \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - "1: \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (v->counter) - : "Ir" (i), "m" (v->counter) - : "memory"); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - result = v->counter; - result -= i; - if (result >= 0) - v->counter = result; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return result; -} - -#define atomic64_cmpxchg(v, o, n) \ - ((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n))) -#define atomic64_xchg(v, new) (xchg(&((v)->counter), (new))) - -/** - * atomic64_add_unless - add unless the number is a given value - * @v: pointer of type atomic64_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * Atomically adds @a to @v, so long as it was not @u. - * Returns non-zero if @v was not @u, and zero otherwise. - */ -static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) -{ - long c, old; - c = atomic64_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic64_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} - -#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) - -#define atomic64_dec_return(v) atomic64_sub_return(1, (v)) -#define atomic64_inc_return(v) atomic64_add_return(1, (v)) - -/* - * atomic64_sub_and_test - subtract value from variable and test result - * @i: integer value to subtract - * @v: pointer of type atomic64_t - * - * Atomically subtracts @i from @v and returns - * true if the result is zero, or false for all - * other cases. - */ -#define atomic64_sub_and_test(i, v) (atomic64_sub_return((i), (v)) == 0) - -/* - * atomic64_inc_and_test - increment and test - * @v: pointer of type atomic64_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) - -/* - * atomic64_dec_and_test - decrement by 1 and test - * @v: pointer of type atomic64_t - * - * Atomically decrements @v by 1 and - * returns true if the result is 0, or false for all other - * cases. - */ -#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0) - -/* - * atomic64_dec_if_positive - decrement by 1 if old value positive - * @v: pointer of type atomic64_t - */ -#define atomic64_dec_if_positive(v) atomic64_sub_if_positive(1, v) - -/* - * atomic64_inc - increment atomic variable - * @v: pointer of type atomic64_t - * - * Atomically increments @v by 1. - */ -#define atomic64_inc(v) atomic64_add(1, (v)) - -/* - * atomic64_dec - decrement and test - * @v: pointer of type atomic64_t - * - * Atomically decrements @v by 1. - */ -#define atomic64_dec(v) atomic64_sub(1, (v)) - -/* - * atomic64_add_negative - add and test if negative - * @v: pointer of type atomic64_t - * @i: integer value to add - * - * Atomically adds @i to @v and returns true - * if the result is negative, or false when - * result is greater than or equal to zero. - */ -#define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0) - -#endif /* CONFIG_64BIT */ - -/* - * atomic*_return operations are serializing but not the non-*_return - * versions. - */ -#define smp_mb__before_atomic_dec() smp_llsc_mb() -#define smp_mb__after_atomic_dec() smp_llsc_mb() -#define smp_mb__before_atomic_inc() smp_llsc_mb() -#define smp_mb__after_atomic_inc() smp_llsc_mb() - -#include - -#endif /* _ASM_ATOMIC_H */ diff --git a/include/asm-mips/auxvec.h b/include/asm-mips/auxvec.h deleted file mode 100644 index 7cf7f2d21943..000000000000 --- a/include/asm-mips/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _ASM_AUXVEC_H -#define _ASM_AUXVEC_H - -#endif /* _ASM_AUXVEC_H */ diff --git a/include/asm-mips/barrier.h b/include/asm-mips/barrier.h deleted file mode 100644 index 8e9ac313ca3b..000000000000 --- a/include/asm-mips/barrier.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_BARRIER_H -#define __ASM_BARRIER_H - -/* - * read_barrier_depends - Flush all pending reads that subsequents reads - * depend on. - * - * No data-dependent reads from memory-like regions are ever reordered - * over this barrier. All reads preceding this primitive are guaranteed - * to access memory (but not necessarily other CPUs' caches) before any - * reads following this primitive that depend on the data return by - * any of the preceding reads. This primitive is much lighter weight than - * rmb() on most CPUs, and is never heavier weight than is - * rmb(). - * - * These ordering constraints are respected by both the local CPU - * and the compiler. - * - * Ordering is not guaranteed by anything other than these primitives, - * not even by data dependencies. See the documentation for - * memory_barrier() for examples and URLs to more information. - * - * For example, the following code would force ordering (the initial - * value of "a" is zero, "b" is one, and "p" is "&a"): - * - * - * CPU 0 CPU 1 - * - * b = 2; - * memory_barrier(); - * p = &b; q = p; - * read_barrier_depends(); - * d = *q; - * - * - * because the read of "*q" depends on the read of "p" and these - * two reads are separated by a read_barrier_depends(). However, - * the following code, with the same initial values for "a" and "b": - * - * - * CPU 0 CPU 1 - * - * a = 2; - * memory_barrier(); - * b = 3; y = b; - * read_barrier_depends(); - * x = a; - * - * - * does not enforce ordering, since there is no data dependency between - * the read of "a" and the read of "b". Therefore, on some CPUs, such - * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() - * in cases like this where there are no data dependencies. - */ - -#define read_barrier_depends() do { } while(0) -#define smp_read_barrier_depends() do { } while(0) - -#ifdef CONFIG_CPU_HAS_SYNC -#define __sync() \ - __asm__ __volatile__( \ - ".set push\n\t" \ - ".set noreorder\n\t" \ - ".set mips2\n\t" \ - "sync\n\t" \ - ".set pop" \ - : /* no output */ \ - : /* no input */ \ - : "memory") -#else -#define __sync() do { } while(0) -#endif - -#define __fast_iob() \ - __asm__ __volatile__( \ - ".set push\n\t" \ - ".set noreorder\n\t" \ - "lw $0,%0\n\t" \ - "nop\n\t" \ - ".set pop" \ - : /* no output */ \ - : "m" (*(int *)CKSEG1) \ - : "memory") - -#define fast_wmb() __sync() -#define fast_rmb() __sync() -#define fast_mb() __sync() -#ifdef CONFIG_SGI_IP28 -#define fast_iob() \ - __asm__ __volatile__( \ - ".set push\n\t" \ - ".set noreorder\n\t" \ - "lw $0,%0\n\t" \ - "sync\n\t" \ - "lw $0,%0\n\t" \ - ".set pop" \ - : /* no output */ \ - : "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \ - : "memory") -#else -#define fast_iob() \ - do { \ - __sync(); \ - __fast_iob(); \ - } while (0) -#endif - -#ifdef CONFIG_CPU_HAS_WB - -#include - -#define wmb() fast_wmb() -#define rmb() fast_rmb() -#define mb() wbflush() -#define iob() wbflush() - -#else /* !CONFIG_CPU_HAS_WB */ - -#define wmb() fast_wmb() -#define rmb() fast_rmb() -#define mb() fast_mb() -#define iob() fast_iob() - -#endif /* !CONFIG_CPU_HAS_WB */ - -#if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP) -#define __WEAK_ORDERING_MB " sync \n" -#else -#define __WEAK_ORDERING_MB " \n" -#endif -#if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP) -#define __WEAK_LLSC_MB " sync \n" -#else -#define __WEAK_LLSC_MB " \n" -#endif - -#define smp_mb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") -#define smp_rmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") -#define smp_wmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") - -#define set_mb(var, value) \ - do { var = value; smp_mb(); } while (0) - -#define smp_llsc_mb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") -#define smp_llsc_rmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") -#define smp_llsc_wmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") - -#endif /* __ASM_BARRIER_H */ diff --git a/include/asm-mips/bcache.h b/include/asm-mips/bcache.h deleted file mode 100644 index 0ba9d6ef76a7..000000000000 --- a/include/asm-mips/bcache.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 1997, 1999 by Ralf Baechle - * Copyright (c) 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_BCACHE_H -#define _ASM_BCACHE_H - - -/* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent, - chipset implemented caches. On machines with other CPUs the CPU does the - cache thing itself. */ -struct bcache_ops { - void (*bc_enable)(void); - void (*bc_disable)(void); - void (*bc_wback_inv)(unsigned long page, unsigned long size); - void (*bc_inv)(unsigned long page, unsigned long size); -}; - -extern void indy_sc_init(void); - -#ifdef CONFIG_BOARD_SCACHE - -extern struct bcache_ops *bcops; - -static inline void bc_enable(void) -{ - bcops->bc_enable(); -} - -static inline void bc_disable(void) -{ - bcops->bc_disable(); -} - -static inline void bc_wback_inv(unsigned long page, unsigned long size) -{ - bcops->bc_wback_inv(page, size); -} - -static inline void bc_inv(unsigned long page, unsigned long size) -{ - bcops->bc_inv(page, size); -} - -#else /* !defined(CONFIG_BOARD_SCACHE) */ - -/* Not R4000 / R4400 / R4600 / R5000. */ - -#define bc_enable() do { } while (0) -#define bc_disable() do { } while (0) -#define bc_wback_inv(page, size) do { } while (0) -#define bc_inv(page, size) do { } while (0) - -#endif /* !defined(CONFIG_BOARD_SCACHE) */ - -#endif /* _ASM_BCACHE_H */ diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h deleted file mode 100644 index 49df8c4c9d25..000000000000 --- a/include/asm-mips/bitops.h +++ /dev/null @@ -1,672 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 1994 - 1997, 99, 2000, 06, 07 Ralf Baechle (ralf@linux-mips.org) - * Copyright (c) 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_BITOPS_H -#define _ASM_BITOPS_H - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include -#include -#include -#include -#include -#include /* sigh ... */ -#include -#include -#include - -#if _MIPS_SZLONG == 32 -#define SZLONG_LOG 5 -#define SZLONG_MASK 31UL -#define __LL "ll " -#define __SC "sc " -#define __INS "ins " -#define __EXT "ext " -#elif _MIPS_SZLONG == 64 -#define SZLONG_LOG 6 -#define SZLONG_MASK 63UL -#define __LL "lld " -#define __SC "scd " -#define __INS "dins " -#define __EXT "dext " -#endif - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() smp_llsc_mb() -#define smp_mb__after_clear_bit() smp_llsc_mb() - -/* - * set_bit - Atomically set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * This function is atomic and may not be reordered. See __set_bit() - * if you do not require the atomic guarantees. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static inline void set_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned short bit = nr & SZLONG_MASK; - unsigned long temp; - - if (cpu_has_llsc && R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set mips3 \n" - "1: " __LL "%0, %1 # set_bit \n" - " or %0, %2 \n" - " " __SC "%0, %1 \n" - " beqzl %0, 1b \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (*m) - : "ir" (1UL << bit), "m" (*m)); -#ifdef CONFIG_CPU_MIPSR2 - } else if (__builtin_constant_p(bit)) { - __asm__ __volatile__( - "1: " __LL "%0, %1 # set_bit \n" - " " __INS "%0, %4, %2, 1 \n" - " " __SC "%0, %1 \n" - " beqz %0, 2f \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - : "=&r" (temp), "=m" (*m) - : "ir" (bit), "m" (*m), "r" (~0)); -#endif /* CONFIG_CPU_MIPSR2 */ - } else if (cpu_has_llsc) { - __asm__ __volatile__( - " .set mips3 \n" - "1: " __LL "%0, %1 # set_bit \n" - " or %0, %2 \n" - " " __SC "%0, %1 \n" - " beqz %0, 2f \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (*m) - : "ir" (1UL << bit), "m" (*m)); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - *a |= mask; - raw_local_irq_restore(flags); - } -} - -/* - * clear_bit - Clears a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * clear_bit() is atomic and may not be reordered. However, it does - * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() - * in order to ensure changes are visible on other processors. - */ -static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned short bit = nr & SZLONG_MASK; - unsigned long temp; - - if (cpu_has_llsc && R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set mips3 \n" - "1: " __LL "%0, %1 # clear_bit \n" - " and %0, %2 \n" - " " __SC "%0, %1 \n" - " beqzl %0, 1b \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (*m) - : "ir" (~(1UL << bit)), "m" (*m)); -#ifdef CONFIG_CPU_MIPSR2 - } else if (__builtin_constant_p(bit)) { - __asm__ __volatile__( - "1: " __LL "%0, %1 # clear_bit \n" - " " __INS "%0, $0, %2, 1 \n" - " " __SC "%0, %1 \n" - " beqz %0, 2f \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - : "=&r" (temp), "=m" (*m) - : "ir" (bit), "m" (*m)); -#endif /* CONFIG_CPU_MIPSR2 */ - } else if (cpu_has_llsc) { - __asm__ __volatile__( - " .set mips3 \n" - "1: " __LL "%0, %1 # clear_bit \n" - " and %0, %2 \n" - " " __SC "%0, %1 \n" - " beqz %0, 2f \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (*m) - : "ir" (~(1UL << bit)), "m" (*m)); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - *a &= ~mask; - raw_local_irq_restore(flags); - } -} - -/* - * clear_bit_unlock - Clears a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * clear_bit() is atomic and implies release semantics before the memory - * operation. It can be used for an unlock. - */ -static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *addr) -{ - smp_mb__before_clear_bit(); - clear_bit(nr, addr); -} - -/* - * change_bit - Toggle a bit in memory - * @nr: Bit to change - * @addr: Address to start counting from - * - * change_bit() is atomic and may not be reordered. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static inline void change_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned short bit = nr & SZLONG_MASK; - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: " __LL "%0, %1 # change_bit \n" - " xor %0, %2 \n" - " " __SC "%0, %1 \n" - " beqzl %0, 1b \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (*m) - : "ir" (1UL << bit), "m" (*m)); - } else if (cpu_has_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: " __LL "%0, %1 # change_bit \n" - " xor %0, %2 \n" - " " __SC "%0, %1 \n" - " beqz %0, 2f \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (*m) - : "ir" (1UL << bit), "m" (*m)); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - *a ^= mask; - raw_local_irq_restore(flags); - } -} - -/* - * test_and_set_bit - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static inline int test_and_set_bit(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned short bit = nr & SZLONG_MASK; - unsigned long res; - - smp_llsc_mb(); - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: " __LL "%0, %1 # test_and_set_bit \n" - " or %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " beqzl %2, 1b \n" - " and %2, %0, %3 \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (*m), "=&r" (res) - : "r" (1UL << bit), "m" (*m) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " .set mips3 \n" - "1: " __LL "%0, %1 # test_and_set_bit \n" - " or %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " beqz %2, 2f \n" - " and %2, %0, %3 \n" - " .subsection 2 \n" - "2: b 1b \n" - " nop \n" - " .previous \n" - " .set pop \n" - : "=&r" (temp), "=m" (*m), "=&r" (res) - : "r" (1UL << bit), "m" (*m) - : "memory"); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - res = (mask & *a); - *a |= mask; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return res != 0; -} - -/* - * test_and_set_bit_lock - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and implies acquire ordering semantics - * after the memory operation. - */ -static inline int test_and_set_bit_lock(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned short bit = nr & SZLONG_MASK; - unsigned long res; - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: " __LL "%0, %1 # test_and_set_bit \n" - " or %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " beqzl %2, 1b \n" - " and %2, %0, %3 \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (*m), "=&r" (res) - : "r" (1UL << bit), "m" (*m) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " .set mips3 \n" - "1: " __LL "%0, %1 # test_and_set_bit \n" - " or %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " beqz %2, 2f \n" - " and %2, %0, %3 \n" - " .subsection 2 \n" - "2: b 1b \n" - " nop \n" - " .previous \n" - " .set pop \n" - : "=&r" (temp), "=m" (*m), "=&r" (res) - : "r" (1UL << bit), "m" (*m) - : "memory"); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - res = (mask & *a); - *a |= mask; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return res != 0; -} -/* - * test_and_clear_bit - Clear a bit and return its old value - * @nr: Bit to clear - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static inline int test_and_clear_bit(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned short bit = nr & SZLONG_MASK; - unsigned long res; - - smp_llsc_mb(); - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: " __LL "%0, %1 # test_and_clear_bit \n" - " or %2, %0, %3 \n" - " xor %2, %3 \n" - " " __SC "%2, %1 \n" - " beqzl %2, 1b \n" - " and %2, %0, %3 \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (*m), "=&r" (res) - : "r" (1UL << bit), "m" (*m) - : "memory"); -#ifdef CONFIG_CPU_MIPSR2 - } else if (__builtin_constant_p(nr)) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - "1: " __LL "%0, %1 # test_and_clear_bit \n" - " " __EXT "%2, %0, %3, 1 \n" - " " __INS "%0, $0, %3, 1 \n" - " " __SC "%0, %1 \n" - " beqz %0, 2f \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - : "=&r" (temp), "=m" (*m), "=&r" (res) - : "ir" (bit), "m" (*m) - : "memory"); -#endif - } else if (cpu_has_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " .set mips3 \n" - "1: " __LL "%0, %1 # test_and_clear_bit \n" - " or %2, %0, %3 \n" - " xor %2, %3 \n" - " " __SC "%2, %1 \n" - " beqz %2, 2f \n" - " and %2, %0, %3 \n" - " .subsection 2 \n" - "2: b 1b \n" - " nop \n" - " .previous \n" - " .set pop \n" - : "=&r" (temp), "=m" (*m), "=&r" (res) - : "r" (1UL << bit), "m" (*m) - : "memory"); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - res = (mask & *a); - *a &= ~mask; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return res != 0; -} - -/* - * test_and_change_bit - Change a bit and return its old value - * @nr: Bit to change - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static inline int test_and_change_bit(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned short bit = nr & SZLONG_MASK; - unsigned long res; - - smp_llsc_mb(); - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1: " __LL "%0, %1 # test_and_change_bit \n" - " xor %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " beqzl %2, 1b \n" - " and %2, %0, %3 \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (*m), "=&r" (res) - : "r" (1UL << bit), "m" (*m) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " .set mips3 \n" - "1: " __LL "%0, %1 # test_and_change_bit \n" - " xor %2, %0, %3 \n" - " " __SC "\t%2, %1 \n" - " beqz %2, 2f \n" - " and %2, %0, %3 \n" - " .subsection 2 \n" - "2: b 1b \n" - " nop \n" - " .previous \n" - " .set pop \n" - : "=&r" (temp), "=m" (*m), "=&r" (res) - : "r" (1UL << bit), "m" (*m) - : "memory"); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - res = (mask & *a); - *a ^= mask; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return res != 0; -} - -#include - -/* - * __clear_bit_unlock - Clears a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * __clear_bit() is non-atomic and implies release semantics before the memory - * operation. It can be used for an unlock if no other CPUs can concurrently - * modify other bits in the word. - */ -static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *addr) -{ - smp_mb(); - __clear_bit(nr, addr); -} - -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - -/* - * Return the bit position (0..63) of the most significant 1 bit in a word - * Returns -1 if no 1 bit exists - */ -static inline unsigned long __fls(unsigned long x) -{ - int lz; - - if (sizeof(x) == 4) { - __asm__( - " .set push \n" - " .set mips32 \n" - " clz %0, %1 \n" - " .set pop \n" - : "=r" (lz) - : "r" (x)); - - return 31 - lz; - } - - BUG_ON(sizeof(x) != 8); - - __asm__( - " .set push \n" - " .set mips64 \n" - " dclz %0, %1 \n" - " .set pop \n" - : "=r" (lz) - : "r" (x)); - - return 63 - lz; -} - -/* - * __ffs - find first bit in word. - * @word: The word to search - * - * Returns 0..SZLONG-1 - * Undefined if no bit exists, so code should check against 0 first. - */ -static inline unsigned long __ffs(unsigned long word) -{ - return __fls(word & -word); -} - -/* - * fls - find last bit set. - * @word: The word to search - * - * This is defined the same way as ffs. - * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. - */ -static inline int fls(int word) -{ - __asm__("clz %0, %1" : "=r" (word) : "r" (word)); - - return 32 - word; -} - -#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPS64) -static inline int fls64(__u64 word) -{ - __asm__("dclz %0, %1" : "=r" (word) : "r" (word)); - - return 64 - word; -} -#else -#include -#endif - -/* - * ffs - find first bit set. - * @word: The word to search - * - * This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ -static inline int ffs(int word) -{ - if (!word) - return 0; - - return fls(word & -word); -} - -#else - -#include -#include -#include -#include -#include - -#endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */ - -#include -#include - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -#endif /* __KERNEL__ */ - -#endif /* _ASM_BITOPS_H */ diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h deleted file mode 100644 index 610fe3af7a03..000000000000 --- a/include/asm-mips/bootinfo.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 2003 by Ralf Baechle - * Copyright (C) 1995, 1996 Andreas Busse - * Copyright (C) 1995, 1996 Stoned Elipot - * Copyright (C) 1995, 1996 Paul M. Antoine. - */ -#ifndef _ASM_BOOTINFO_H -#define _ASM_BOOTINFO_H - -#include -#include - -/* - * The MACH_ IDs are sort of equivalent to PCI product IDs. As such the - * numbers do not necessarily reflect technical relations or similarities - * between systems. - */ - -/* - * Valid machtype values for group unknown - */ -#define MACH_UNKNOWN 0 /* whatever... */ - -/* - * Valid machtype for group DEC - */ -#define MACH_DSUNKNOWN 0 -#define MACH_DS23100 1 /* DECstation 2100 or 3100 */ -#define MACH_DS5100 2 /* DECsystem 5100 */ -#define MACH_DS5000_200 3 /* DECstation 5000/200 */ -#define MACH_DS5000_1XX 4 /* DECstation 5000/120, 125, 133, 150 */ -#define MACH_DS5000_XX 5 /* DECstation 5000/20, 25, 33, 50 */ -#define MACH_DS5000_2X0 6 /* DECstation 5000/240, 260 */ -#define MACH_DS5400 7 /* DECsystem 5400 */ -#define MACH_DS5500 8 /* DECsystem 5500 */ -#define MACH_DS5800 9 /* DECsystem 5800 */ -#define MACH_DS5900 10 /* DECsystem 5900 */ - -/* - * Valid machtype for group PMC-MSP - */ -#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */ -#define MACH_MSP4200_GW 1 /* PMC-Sierra MSP4200 Gateway demo */ -#define MACH_MSP4200_FPGA 2 /* PMC-Sierra MSP4200 Emulation */ -#define MACH_MSP7120_EVAL 3 /* PMC-Sierra MSP7120 Evaluation */ -#define MACH_MSP7120_GW 4 /* PMC-Sierra MSP7120 Residential GW */ -#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ -#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ - -/* - * Valid machtype for group Mikrotik - */ -#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ -#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ - -#define CL_SIZE COMMAND_LINE_SIZE - -extern char *system_type; -const char *get_system_type(void); - -extern unsigned long mips_machtype; - -#define BOOT_MEM_MAP_MAX 32 -#define BOOT_MEM_RAM 1 -#define BOOT_MEM_ROM_DATA 2 -#define BOOT_MEM_RESERVED 3 - -/* - * A memory map that's built upon what was determined - * or specified on the command line. - */ -struct boot_mem_map { - int nr_map; - struct boot_mem_map_entry { - phys_t addr; /* start of memory segment */ - phys_t size; /* size of memory segment */ - long type; /* type of memory segment */ - } map[BOOT_MEM_MAP_MAX]; -}; - -extern struct boot_mem_map boot_mem_map; - -extern void add_memory_region(phys_t start, phys_t size, long type); - -extern void prom_init(void); -extern void prom_free_prom_memory(void); - -extern void free_init_pages(const char *what, - unsigned long begin, unsigned long end); - -/* - * Initial kernel command line, usually setup by prom_init() - */ -extern char arcs_cmdline[CL_SIZE]; - -/* - * Registers a0, a1, a3 and a4 as passed to the kernel entry by firmware - */ -extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; - -/* - * Platform memory detection hook called by setup_arch - */ -extern void plat_mem_setup(void); - -#endif /* _ASM_BOOTINFO_H */ diff --git a/include/asm-mips/branch.h b/include/asm-mips/branch.h deleted file mode 100644 index 37c6857c8d4a..000000000000 --- a/include/asm-mips/branch.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 1997, 1998, 2001 by Ralf Baechle - */ -#ifndef _ASM_BRANCH_H -#define _ASM_BRANCH_H - -#include - -static inline int delay_slot(struct pt_regs *regs) -{ - return regs->cp0_cause & CAUSEF_BD; -} - -static inline unsigned long exception_epc(struct pt_regs *regs) -{ - if (!delay_slot(regs)) - return regs->cp0_epc; - - return regs->cp0_epc + 4; -} - -extern int __compute_return_epc(struct pt_regs *regs); - -static inline int compute_return_epc(struct pt_regs *regs) -{ - if (!delay_slot(regs)) { - regs->cp0_epc += 4; - return 0; - } - - return __compute_return_epc(regs); -} - -#endif /* _ASM_BRANCH_H */ diff --git a/include/asm-mips/break.h b/include/asm-mips/break.h deleted file mode 100644 index 25b980c91e7e..000000000000 --- a/include/asm-mips/break.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 2003 by Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#ifndef __ASM_BREAK_H -#define __ASM_BREAK_H - -/* - * The following break codes are or were in use for specific purposes in - * other MIPS operating systems. Linux/MIPS doesn't use all of them. The - * unused ones are here as placeholders; we might encounter them in - * non-Linux/MIPS object files or make use of them in the future. - */ -#define BRK_USERBP 0 /* User bp (used by debuggers) */ -#define BRK_KERNELBP 1 /* Break in the kernel */ -#define BRK_ABORT 2 /* Sometimes used by abort(3) to SIGIOT */ -#define BRK_BD_TAKEN 3 /* For bd slot emulation - not implemented */ -#define BRK_BD_NOTTAKEN 4 /* For bd slot emulation - not implemented */ -#define BRK_SSTEPBP 5 /* User bp (used by debuggers) */ -#define BRK_OVERFLOW 6 /* Overflow check */ -#define BRK_DIVZERO 7 /* Divide by zero check */ -#define BRK_RANGE 8 /* Range error check */ -#define BRK_STACKOVERFLOW 9 /* For Ada stackchecking */ -#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */ -#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */ -#define BRK_BUG 512 /* Used by BUG() */ -#define BRK_KDB 513 /* Used in KDB_ENTER() */ -#define BRK_MULOVF 1023 /* Multiply overflow */ - -#endif /* __ASM_BREAK_H */ diff --git a/include/asm-mips/bug.h b/include/asm-mips/bug.h deleted file mode 100644 index 7eb63de808bc..000000000000 --- a/include/asm-mips/bug.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __ASM_BUG_H -#define __ASM_BUG_H - -#include - -#ifdef CONFIG_BUG - -#include - -#define BUG() \ -do { \ - __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \ -} while (0) - -#define HAVE_ARCH_BUG - -#if (_MIPS_ISA > _MIPS_ISA_MIPS1) - -#define BUG_ON(condition) \ -do { \ - __asm__ __volatile__("tne $0, %0, %1" \ - : : "r" (condition), "i" (BRK_BUG)); \ -} while (0) - -#define HAVE_ARCH_BUG_ON - -#endif /* _MIPS_ISA > _MIPS_ISA_MIPS1 */ - -#endif - -#include - -#endif /* __ASM_BUG_H */ diff --git a/include/asm-mips/bugs.h b/include/asm-mips/bugs.h deleted file mode 100644 index 9dc10df32078..000000000000 --- a/include/asm-mips/bugs.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Copyright (C) 2007 Maciej W. Rozycki - * - * Needs: - * void check_bugs(void); - */ -#ifndef _ASM_BUGS_H -#define _ASM_BUGS_H - -#include -#include - -#include -#include - -extern int daddiu_bug; - -extern void check_bugs64_early(void); - -extern void check_bugs32(void); -extern void check_bugs64(void); - -static inline void check_bugs_early(void) -{ -#ifdef CONFIG_64BIT - check_bugs64_early(); -#endif -} - -static inline void check_bugs(void) -{ - unsigned int cpu = smp_processor_id(); - - cpu_data[cpu].udelay_val = loops_per_jiffy; - check_bugs32(); -#ifdef CONFIG_64BIT - check_bugs64(); -#endif -} - -static inline int r4k_daddiu_bug(void) -{ -#ifdef CONFIG_64BIT - WARN_ON(daddiu_bug < 0); - return daddiu_bug != 0; -#else - return 0; -#endif -} - -#endif /* _ASM_BUGS_H */ diff --git a/include/asm-mips/byteorder.h b/include/asm-mips/byteorder.h deleted file mode 100644 index fe7dc2d59b69..000000000000 --- a/include/asm-mips/byteorder.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 99, 2003 by Ralf Baechle - */ -#ifndef _ASM_BYTEORDER_H -#define _ASM_BYTEORDER_H - -#include -#include - -#ifdef __GNUC__ - -#ifdef CONFIG_CPU_MIPSR2 - -static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x) -{ - __asm__( - " wsbh %0, %1 \n" - : "=r" (x) - : "r" (x)); - - return x; -} -#define __arch__swab16(x) ___arch__swab16(x) - -static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) -{ - __asm__( - " wsbh %0, %1 \n" - " rotr %0, %0, 16 \n" - : "=r" (x) - : "r" (x)); - - return x; -} -#define __arch__swab32(x) ___arch__swab32(x) - -#ifdef CONFIG_CPU_MIPS64_R2 - -static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x) -{ - __asm__( - " dsbh %0, %1 \n" - " dshd %0, %0 \n" - " drotr %0, %0, 32 \n" - : "=r" (x) - : "r" (x)); - - return x; -} - -#define __arch__swab64(x) ___arch__swab64(x) - -#endif /* CONFIG_CPU_MIPS64_R2 */ - -#endif /* CONFIG_CPU_MIPSR2 */ - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#endif /* __GNUC__ */ - -#if defined(__MIPSEB__) -# include -#elif defined(__MIPSEL__) -# include -#else -# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???" -#endif - -#endif /* _ASM_BYTEORDER_H */ diff --git a/include/asm-mips/cache.h b/include/asm-mips/cache.h deleted file mode 100644 index 37f175c42bb5..000000000000 --- a/include/asm-mips/cache.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1997, 98, 99, 2000, 2003 Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_CACHE_H -#define _ASM_CACHE_H - -#include - -#define L1_CACHE_SHIFT CONFIG_MIPS_L1_CACHE_SHIFT -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#define SMP_CACHE_SHIFT L1_CACHE_SHIFT -#define SMP_CACHE_BYTES L1_CACHE_BYTES - -#endif /* _ASM_CACHE_H */ diff --git a/include/asm-mips/cachectl.h b/include/asm-mips/cachectl.h deleted file mode 100644 index f3ce721861d3..000000000000 --- a/include/asm-mips/cachectl.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 1995, 1996 by Ralf Baechle - */ -#ifndef _ASM_CACHECTL -#define _ASM_CACHECTL - -/* - * Options for cacheflush system call - */ -#define ICACHE (1<<0) /* flush instruction cache */ -#define DCACHE (1<<1) /* writeback and flush data cache */ -#define BCACHE (ICACHE|DCACHE) /* flush both caches */ - -/* - * Caching modes for the cachectl(2) call - * - * cachectl(2) is currently not supported and returns ENOSYS. - */ -#define CACHEABLE 0 /* make pages cacheable */ -#define UNCACHEABLE 1 /* make pages uncacheable */ - -#endif /* _ASM_CACHECTL */ diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h deleted file mode 100644 index 03b1d69b142f..000000000000 --- a/include/asm-mips/cacheflush.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle - * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. - */ -#ifndef _ASM_CACHEFLUSH_H -#define _ASM_CACHEFLUSH_H - -/* Keep includes the same across arches. */ -#include -#include - -/* Cache flushing: - * - * - flush_cache_all() flushes entire cache - * - flush_cache_mm(mm) flushes the specified mm context's cache lines - * - flush_cache_dup mm(mm) handles cache flushing when forking - * - flush_cache_page(mm, vmaddr, pfn) flushes a single page - * - flush_cache_range(vma, start, end) flushes a range of pages - * - flush_icache_range(start, end) flush a range of instructions - * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache - * - * MIPS specific flush operations: - * - * - flush_cache_sigtramp() flush signal trampoline - * - flush_icache_all() flush the entire instruction cache - * - flush_data_cache_page() flushes a page from the data cache - */ -extern void (*flush_cache_all)(void); -extern void (*__flush_cache_all)(void); -extern void (*flush_cache_mm)(struct mm_struct *mm); -#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0) -extern void (*flush_cache_range)(struct vm_area_struct *vma, - unsigned long start, unsigned long end); -extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); -extern void __flush_dcache_page(struct page *page); - -static inline void flush_dcache_page(struct page *page) -{ - if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) - __flush_dcache_page(page); - -} - -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -#define ARCH_HAS_FLUSH_ANON_PAGE -extern void __flush_anon_page(struct page *, unsigned long); -static inline void flush_anon_page(struct vm_area_struct *vma, - struct page *page, unsigned long vmaddr) -{ - if (cpu_has_dc_aliases && PageAnon(page)) - __flush_anon_page(page, vmaddr); -} - -static inline void flush_icache_page(struct vm_area_struct *vma, - struct page *page) -{ -} - -extern void (*flush_icache_range)(unsigned long start, unsigned long end); -extern void (*local_flush_icache_range)(unsigned long start, unsigned long end); - -extern void (*__flush_cache_vmap)(void); - -static inline void flush_cache_vmap(unsigned long start, unsigned long end) -{ - if (cpu_has_dc_aliases) - __flush_cache_vmap(); -} - -extern void (*__flush_cache_vunmap)(void); - -static inline void flush_cache_vunmap(unsigned long start, unsigned long end) -{ - if (cpu_has_dc_aliases) - __flush_cache_vunmap(); -} - -extern void copy_to_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len); - -extern void copy_from_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len); - -extern void (*flush_cache_sigtramp)(unsigned long addr); -extern void (*flush_icache_all)(void); -extern void (*local_flush_data_cache_page)(void * addr); -extern void (*flush_data_cache_page)(unsigned long addr); - -/* - * This flag is used to indicate that the page pointed to by a pte - * is dirty and requires cleaning before returning it to the user. - */ -#define PG_dcache_dirty PG_arch_1 - -#define Page_dcache_dirty(page) \ - test_bit(PG_dcache_dirty, &(page)->flags) -#define SetPageDcacheDirty(page) \ - set_bit(PG_dcache_dirty, &(page)->flags) -#define ClearPageDcacheDirty(page) \ - clear_bit(PG_dcache_dirty, &(page)->flags) - -/* Run kernel code uncached, useful for cache probing functions. */ -unsigned long run_uncached(void *func); - -extern void *kmap_coherent(struct page *page, unsigned long addr); -extern void kunmap_coherent(void); - -#endif /* _ASM_CACHEFLUSH_H */ diff --git a/include/asm-mips/cacheops.h b/include/asm-mips/cacheops.h deleted file mode 100644 index 256ad2cc6eb8..000000000000 --- a/include/asm-mips/cacheops.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Cache operations for the cache instruction. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle - * (C) Copyright 1999 Silicon Graphics, Inc. - */ -#ifndef __ASM_CACHEOPS_H -#define __ASM_CACHEOPS_H - -/* - * Cache Operations available on all MIPS processors with R4000-style caches - */ -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 -#define Index_Load_Tag_I 0x04 -#define Index_Load_Tag_D 0x05 -#define Index_Store_Tag_I 0x08 -#define Index_Store_Tag_D 0x09 -#if defined(CONFIG_CPU_LOONGSON2) -#define Hit_Invalidate_I 0x00 -#else -#define Hit_Invalidate_I 0x10 -#endif -#define Hit_Invalidate_D 0x11 -#define Hit_Writeback_Inv_D 0x15 - -/* - * R4000-specific cacheops - */ -#define Create_Dirty_Excl_D 0x0d -#define Fill 0x14 -#define Hit_Writeback_I 0x18 -#define Hit_Writeback_D 0x19 - -/* - * R4000SC and R4400SC-specific cacheops - */ -#define Index_Invalidate_SI 0x02 -#define Index_Writeback_Inv_SD 0x03 -#define Index_Load_Tag_SI 0x06 -#define Index_Load_Tag_SD 0x07 -#define Index_Store_Tag_SI 0x0A -#define Index_Store_Tag_SD 0x0B -#define Create_Dirty_Excl_SD 0x0f -#define Hit_Invalidate_SI 0x12 -#define Hit_Invalidate_SD 0x13 -#define Hit_Writeback_Inv_SD 0x17 -#define Hit_Writeback_SD 0x1b -#define Hit_Set_Virtual_SI 0x1e -#define Hit_Set_Virtual_SD 0x1f - -/* - * R5000-specific cacheops - */ -#define R5K_Page_Invalidate_S 0x17 - -/* - * RM7000-specific cacheops - */ -#define Page_Invalidate_T 0x16 - -/* - * R10000-specific cacheops - * - * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused. - * Most of the _S cacheops are identical to the R4000SC _SD cacheops. - */ -#define Index_Writeback_Inv_S 0x03 -#define Index_Load_Tag_S 0x07 -#define Index_Store_Tag_S 0x0B -#define Hit_Invalidate_S 0x13 -#define Cache_Barrier 0x14 -#define Hit_Writeback_Inv_S 0x17 -#define Index_Load_Data_I 0x18 -#define Index_Load_Data_D 0x19 -#define Index_Load_Data_S 0x1b -#define Index_Store_Data_I 0x1c -#define Index_Store_Data_D 0x1d -#define Index_Store_Data_S 0x1f - -#endif /* __ASM_CACHEOPS_H */ diff --git a/include/asm-mips/checksum.h b/include/asm-mips/checksum.h deleted file mode 100644 index 290485ac5407..000000000000 --- a/include/asm-mips/checksum.h +++ /dev/null @@ -1,260 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 96, 97, 98, 99, 2001 by Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - * Copyright (C) 2001 Thiemo Seufer. - * Copyright (C) 2002 Maciej W. Rozycki - */ -#ifndef _ASM_CHECKSUM_H -#define _ASM_CHECKSUM_H - -#include - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -__wsum __csum_partial_copy_user(const void *src, void *dst, - int len, __wsum sum, int *err_ptr); - -/* - * this is a new version of the above that records errors it finds in *errp, - * but continues and zeros the rest of the buffer. - */ -static inline -__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, - __wsum sum, int *err_ptr) -{ - might_sleep(); - return __csum_partial_copy_user((__force void *)src, dst, - len, sum, err_ptr); -} - -/* - * Copy and checksum to user - */ -#define HAVE_CSUM_COPY_USER -static inline -__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len, - __wsum sum, int *err_ptr) -{ - might_sleep(); - if (access_ok(VERIFY_WRITE, dst, len)) - return __csum_partial_copy_user(src, (__force void *)dst, - len, sum, err_ptr); - if (len) - *err_ptr = -EFAULT; - - return (__force __wsum)-1; /* invalid checksum */ -} - -/* - * the same as csum_partial, but copies from user space (but on MIPS - * we have just one address space, so this is identical to the above) - */ -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum); - -/* - * Fold a partial checksum without adding pseudo headers - */ -static inline __sum16 csum_fold(__wsum sum) -{ - __asm__( - " .set push # csum_fold\n" - " .set noat \n" - " sll $1, %0, 16 \n" - " addu %0, $1 \n" - " sltu $1, %0, $1 \n" - " srl %0, %0, 16 \n" - " addu %0, $1 \n" - " xori %0, 0xffff \n" - " .set pop" - : "=r" (sum) - : "0" (sum)); - - return (__force __sum16)sum; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - * By Jorge Cwik , adapted for linux by - * Arnt Gulbrandsen. - */ -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - const unsigned int *word = iph; - const unsigned int *stop = word + ihl; - unsigned int csum; - int carry; - - csum = word[0]; - csum += word[1]; - carry = (csum < word[1]); - csum += carry; - - csum += word[2]; - carry = (csum < word[2]); - csum += carry; - - csum += word[3]; - carry = (csum < word[3]); - csum += carry; - - word += 4; - do { - csum += *word; - carry = (csum < *word); - csum += carry; - word++; - } while (word != stop); - - return csum_fold(csum); -} - -static inline __wsum csum_tcpudp_nofold(__be32 saddr, - __be32 daddr, unsigned short len, unsigned short proto, - __wsum sum) -{ - __asm__( - " .set push # csum_tcpudp_nofold\n" - " .set noat \n" -#ifdef CONFIG_32BIT - " addu %0, %2 \n" - " sltu $1, %0, %2 \n" - " addu %0, $1 \n" - - " addu %0, %3 \n" - " sltu $1, %0, %3 \n" - " addu %0, $1 \n" - - " addu %0, %4 \n" - " sltu $1, %0, %4 \n" - " addu %0, $1 \n" -#endif -#ifdef CONFIG_64BIT - " daddu %0, %2 \n" - " daddu %0, %3 \n" - " daddu %0, %4 \n" - " dsll32 $1, %0, 0 \n" - " daddu %0, $1 \n" - " dsra32 %0, %0, 0 \n" -#endif - " .set pop" - : "=r" (sum) - : "0" ((__force unsigned long)daddr), - "r" ((__force unsigned long)saddr), -#ifdef __MIPSEL__ - "r" ((proto + len) << 8), -#else - "r" (proto + len), -#endif - "r" ((__force unsigned long)sum)); - - return sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#define _HAVE_ARCH_IPV6_CSUM -static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, - const struct in6_addr *daddr, - __u32 len, unsigned short proto, - __wsum sum) -{ - __asm__( - " .set push # csum_ipv6_magic\n" - " .set noreorder \n" - " .set noat \n" - " addu %0, %5 # proto (long in network byte order)\n" - " sltu $1, %0, %5 \n" - " addu %0, $1 \n" - - " addu %0, %6 # csum\n" - " sltu $1, %0, %6 \n" - " lw %1, 0(%2) # four words source address\n" - " addu %0, $1 \n" - " addu %0, %1 \n" - " sltu $1, %0, %1 \n" - - " lw %1, 4(%2) \n" - " addu %0, $1 \n" - " addu %0, %1 \n" - " sltu $1, %0, %1 \n" - - " lw %1, 8(%2) \n" - " addu %0, $1 \n" - " addu %0, %1 \n" - " sltu $1, %0, %1 \n" - - " lw %1, 12(%2) \n" - " addu %0, $1 \n" - " addu %0, %1 \n" - " sltu $1, %0, %1 \n" - - " lw %1, 0(%3) \n" - " addu %0, $1 \n" - " addu %0, %1 \n" - " sltu $1, %0, %1 \n" - - " lw %1, 4(%3) \n" - " addu %0, $1 \n" - " addu %0, %1 \n" - " sltu $1, %0, %1 \n" - - " lw %1, 8(%3) \n" - " addu %0, $1 \n" - " addu %0, %1 \n" - " sltu $1, %0, %1 \n" - - " lw %1, 12(%3) \n" - " addu %0, $1 \n" - " addu %0, %1 \n" - " sltu $1, %0, %1 \n" - - " addu %0, $1 # Add final carry\n" - " .set pop" - : "=r" (sum), "=r" (proto) - : "r" (saddr), "r" (daddr), - "0" (htonl(len)), "1" (htonl(proto)), "r" (sum)); - - return csum_fold(sum); -} - -#endif /* _ASM_CHECKSUM_H */ diff --git a/include/asm-mips/cmp.h b/include/asm-mips/cmp.h deleted file mode 100644 index 89a73fb93ae6..000000000000 --- a/include/asm-mips/cmp.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _ASM_CMP_H -#define _ASM_CMP_H - -/* - * Definitions for CMP multitasking on MIPS cores - */ -struct task_struct; - -extern void cmp_smp_setup(void); -extern void cmp_smp_finish(void); -extern void cmp_boot_secondary(int cpu, struct task_struct *t); -extern void cmp_init_secondary(void); -extern void cmp_cpus_done(void); -extern void cmp_prepare_cpus(unsigned int max_cpus); - -/* This is platform specific */ -extern void cmp_send_ipi(int cpu, unsigned int action); -#endif /* _ASM_CMP_H */ diff --git a/include/asm-mips/cmpxchg.h b/include/asm-mips/cmpxchg.h deleted file mode 100644 index 4a812c3ceb90..000000000000 --- a/include/asm-mips/cmpxchg.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 06, 07 by Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_CMPXCHG_H -#define __ASM_CMPXCHG_H - -#include - -#define __HAVE_ARCH_CMPXCHG 1 - -#define __cmpxchg_asm(ld, st, m, old, new) \ -({ \ - __typeof(*(m)) __ret; \ - \ - if (cpu_has_llsc && R10000_LLSC_WAR) { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " .set mips3 \n" \ - "1: " ld " %0, %2 # __cmpxchg_asm \n" \ - " bne %0, %z3, 2f \n" \ - " .set mips0 \n" \ - " move $1, %z4 \n" \ - " .set mips3 \n" \ - " " st " $1, %1 \n" \ - " beqzl $1, 1b \n" \ - "2: \n" \ - " .set pop \n" \ - : "=&r" (__ret), "=R" (*m) \ - : "R" (*m), "Jr" (old), "Jr" (new) \ - : "memory"); \ - } else if (cpu_has_llsc) { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " .set mips3 \n" \ - "1: " ld " %0, %2 # __cmpxchg_asm \n" \ - " bne %0, %z3, 2f \n" \ - " .set mips0 \n" \ - " move $1, %z4 \n" \ - " .set mips3 \n" \ - " " st " $1, %1 \n" \ - " beqz $1, 3f \n" \ - "2: \n" \ - " .subsection 2 \n" \ - "3: b 1b \n" \ - " .previous \n" \ - " .set pop \n" \ - : "=&r" (__ret), "=R" (*m) \ - : "R" (*m), "Jr" (old), "Jr" (new) \ - : "memory"); \ - } else { \ - unsigned long __flags; \ - \ - raw_local_irq_save(__flags); \ - __ret = *m; \ - if (__ret == old) \ - *m = new; \ - raw_local_irq_restore(__flags); \ - } \ - \ - __ret; \ -}) - -/* - * This function doesn't exist, so you'll get a linker error - * if something tries to do an invalid cmpxchg(). - */ -extern void __cmpxchg_called_with_bad_pointer(void); - -#define __cmpxchg(ptr, old, new, barrier) \ -({ \ - __typeof__(ptr) __ptr = (ptr); \ - __typeof__(*(ptr)) __old = (old); \ - __typeof__(*(ptr)) __new = (new); \ - __typeof__(*(ptr)) __res = 0; \ - \ - barrier; \ - \ - switch (sizeof(*(__ptr))) { \ - case 4: \ - __res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new); \ - break; \ - case 8: \ - if (sizeof(long) == 8) { \ - __res = __cmpxchg_asm("lld", "scd", __ptr, \ - __old, __new); \ - break; \ - } \ - default: \ - __cmpxchg_called_with_bad_pointer(); \ - break; \ - } \ - \ - barrier; \ - \ - __res; \ -}) - -#define cmpxchg(ptr, old, new) __cmpxchg(ptr, old, new, smp_llsc_mb()) -#define cmpxchg_local(ptr, old, new) __cmpxchg(ptr, old, new, ) - -#define cmpxchg64(ptr, o, n) \ - ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - cmpxchg((ptr), (o), (n)); \ - }) - -#ifdef CONFIG_64BIT -#define cmpxchg64_local(ptr, o, n) \ - ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - cmpxchg_local((ptr), (o), (n)); \ - }) -#else -#include -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) -#endif - -#endif /* __ASM_CMPXCHG_H */ diff --git a/include/asm-mips/compat-signal.h b/include/asm-mips/compat-signal.h deleted file mode 100644 index 368a99e5c3e1..000000000000 --- a/include/asm-mips/compat-signal.h +++ /dev/null @@ -1,119 +0,0 @@ -#ifndef __ASM_COMPAT_SIGNAL_H -#define __ASM_COMPAT_SIGNAL_H - -#include -#include -#include - -#include -#include - -#include - -#define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3) - -typedef struct compat_siginfo { - int si_signo; - int si_code; - int si_errno; - - union { - int _pad[SI_PAD_SIZE32]; - - /* kill() */ - struct { - compat_pid_t _pid; /* sender's pid */ - compat_uid_t _uid; /* sender's uid */ - } _kill; - - /* SIGCHLD */ - struct { - compat_pid_t _pid; /* which child */ - compat_uid_t _uid; /* sender's uid */ - int _status; /* exit code */ - compat_clock_t _utime; - compat_clock_t _stime; - } _sigchld; - - /* IRIX SIGCHLD */ - struct { - compat_pid_t _pid; /* which child */ - compat_clock_t _utime; - int _status; /* exit code */ - compat_clock_t _stime; - } _irix_sigchld; - - /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ - struct { - s32 _addr; /* faulting insn/memory ref. */ - } _sigfault; - - /* SIGPOLL, SIGXFSZ (To do ...) */ - struct { - int _band; /* POLL_IN, POLL_OUT, POLL_MSG */ - int _fd; - } _sigpoll; - - /* POSIX.1b timers */ - struct { - timer_t _tid; /* timer id */ - int _overrun; /* overrun count */ - compat_sigval_t _sigval;/* same as below */ - int _sys_private; /* not to be passed to user */ - } _timer; - - /* POSIX.1b signals */ - struct { - compat_pid_t _pid; /* sender's pid */ - compat_uid_t _uid; /* sender's uid */ - compat_sigval_t _sigval; - } _rt; - - } _sifields; -} compat_siginfo_t; - -static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d, - const sigset_t *s) -{ - int err; - - BUG_ON(sizeof(*d) != sizeof(*s)); - BUG_ON(_NSIG_WORDS != 2); - - err = __put_user(s->sig[0], &d->sig[0]); - err |= __put_user(s->sig[0] >> 32, &d->sig[1]); - err |= __put_user(s->sig[1], &d->sig[2]); - err |= __put_user(s->sig[1] >> 32, &d->sig[3]); - - return err; -} - -static inline int __copy_conv_sigset_from_user(sigset_t *d, - const compat_sigset_t __user *s) -{ - int err; - union sigset_u { - sigset_t s; - compat_sigset_t c; - } *u = (union sigset_u *) d; - - BUG_ON(sizeof(*d) != sizeof(*s)); - BUG_ON(_NSIG_WORDS != 2); - -#ifdef CONFIG_CPU_BIG_ENDIAN - err = __get_user(u->c.sig[1], &s->sig[0]); - err |= __get_user(u->c.sig[0], &s->sig[1]); - err |= __get_user(u->c.sig[3], &s->sig[2]); - err |= __get_user(u->c.sig[2], &s->sig[3]); -#endif -#ifdef CONFIG_CPU_LITTLE_ENDIAN - err = __get_user(u->c.sig[0], &s->sig[0]); - err |= __get_user(u->c.sig[1], &s->sig[1]); - err |= __get_user(u->c.sig[2], &s->sig[2]); - err |= __get_user(u->c.sig[3], &s->sig[3]); -#endif - - return err; -} - -#endif /* __ASM_COMPAT_SIGNAL_H */ diff --git a/include/asm-mips/compat.h b/include/asm-mips/compat.h deleted file mode 100644 index ac5d541368e9..000000000000 --- a/include/asm-mips/compat.h +++ /dev/null @@ -1,221 +0,0 @@ -#ifndef _ASM_COMPAT_H -#define _ASM_COMPAT_H -/* - * Architecture specific compatibility types - */ -#include -#include -#include - -#define COMPAT_USER_HZ 100 - -typedef u32 compat_size_t; -typedef s32 compat_ssize_t; -typedef s32 compat_time_t; -typedef s32 compat_clock_t; -typedef s32 compat_suseconds_t; - -typedef s32 compat_pid_t; -typedef s32 __compat_uid_t; -typedef s32 __compat_gid_t; -typedef __compat_uid_t __compat_uid32_t; -typedef __compat_gid_t __compat_gid32_t; -typedef u32 compat_mode_t; -typedef u32 compat_ino_t; -typedef u32 compat_dev_t; -typedef s32 compat_off_t; -typedef s64 compat_loff_t; -typedef u32 compat_nlink_t; -typedef s32 compat_ipc_pid_t; -typedef s32 compat_daddr_t; -typedef s32 compat_caddr_t; -typedef struct { - s32 val[2]; -} compat_fsid_t; -typedef s32 compat_timer_t; -typedef s32 compat_key_t; - -typedef s32 compat_int_t; -typedef s32 compat_long_t; -typedef s64 compat_s64; -typedef u32 compat_uint_t; -typedef u32 compat_ulong_t; -typedef u64 compat_u64; - -struct compat_timespec { - compat_time_t tv_sec; - s32 tv_nsec; -}; - -struct compat_timeval { - compat_time_t tv_sec; - s32 tv_usec; -}; - -struct compat_stat { - compat_dev_t st_dev; - s32 st_pad1[3]; - compat_ino_t st_ino; - compat_mode_t st_mode; - compat_nlink_t st_nlink; - __compat_uid_t st_uid; - __compat_gid_t st_gid; - compat_dev_t st_rdev; - s32 st_pad2[2]; - compat_off_t st_size; - s32 st_pad3; - compat_time_t st_atime; - s32 st_atime_nsec; - compat_time_t st_mtime; - s32 st_mtime_nsec; - compat_time_t st_ctime; - s32 st_ctime_nsec; - s32 st_blksize; - s32 st_blocks; - s32 st_pad4[14]; -}; - -struct compat_flock { - short l_type; - short l_whence; - compat_off_t l_start; - compat_off_t l_len; - s32 l_sysid; - compat_pid_t l_pid; - short __unused; - s32 pad[4]; -}; - -#define F_GETLK64 33 -#define F_SETLK64 34 -#define F_SETLKW64 35 - -struct compat_flock64 { - short l_type; - short l_whence; - compat_loff_t l_start; - compat_loff_t l_len; - compat_pid_t l_pid; -}; - -struct compat_statfs { - int f_type; - int f_bsize; - int f_frsize; - int f_blocks; - int f_bfree; - int f_files; - int f_ffree; - int f_bavail; - compat_fsid_t f_fsid; - int f_namelen; - int f_spare[6]; -}; - -#define COMPAT_RLIM_INFINITY 0x7fffffffUL - -typedef u32 compat_old_sigset_t; /* at least 32 bits */ - -#define _COMPAT_NSIG 128 /* Don't ask !$@#% ... */ -#define _COMPAT_NSIG_BPW 32 - -typedef u32 compat_sigset_word; - -#define COMPAT_OFF_T_MAX 0x7fffffff -#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL - -/* - * A pointer passed in from user mode. This should not - * be used for syscall parameters, just declare them - * as pointers because the syscall entry code will have - * appropriately converted them already. - */ -typedef u32 compat_uptr_t; - -static inline void __user *compat_ptr(compat_uptr_t uptr) -{ - /* cast to a __user pointer via "unsigned long" makes sparse happy */ - return (void __user *)(unsigned long)(long)uptr; -} - -static inline compat_uptr_t ptr_to_compat(void __user *uptr) -{ - return (u32)(unsigned long)uptr; -} - -static inline void __user *compat_alloc_user_space(long len) -{ - struct pt_regs *regs = (struct pt_regs *) - ((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1; - - return (void __user *) (regs->regs[29] - len); -} - -struct compat_ipc64_perm { - compat_key_t key; - __compat_uid32_t uid; - __compat_gid32_t gid; - __compat_uid32_t cuid; - __compat_gid32_t cgid; - compat_mode_t mode; - unsigned short seq; - unsigned short __pad2; - compat_ulong_t __unused1; - compat_ulong_t __unused2; -}; - -struct compat_semid64_ds { - struct compat_ipc64_perm sem_perm; - compat_time_t sem_otime; - compat_time_t sem_ctime; - compat_ulong_t sem_nsems; - compat_ulong_t __unused1; - compat_ulong_t __unused2; -}; - -struct compat_msqid64_ds { - struct compat_ipc64_perm msg_perm; -#ifndef CONFIG_CPU_LITTLE_ENDIAN - compat_ulong_t __unused1; -#endif - compat_time_t msg_stime; -#ifdef CONFIG_CPU_LITTLE_ENDIAN - compat_ulong_t __unused1; -#endif -#ifndef CONFIG_CPU_LITTLE_ENDIAN - compat_ulong_t __unused2; -#endif - compat_time_t msg_rtime; -#ifdef CONFIG_CPU_LITTLE_ENDIAN - compat_ulong_t __unused2; -#endif -#ifndef CONFIG_CPU_LITTLE_ENDIAN - compat_ulong_t __unused3; -#endif - compat_time_t msg_ctime; -#ifdef CONFIG_CPU_LITTLE_ENDIAN - compat_ulong_t __unused3; -#endif - compat_ulong_t msg_cbytes; - compat_ulong_t msg_qnum; - compat_ulong_t msg_qbytes; - compat_pid_t msg_lspid; - compat_pid_t msg_lrpid; - compat_ulong_t __unused4; - compat_ulong_t __unused5; -}; - -struct compat_shmid64_ds { - struct compat_ipc64_perm shm_perm; - compat_size_t shm_segsz; - compat_time_t shm_atime; - compat_time_t shm_dtime; - compat_time_t shm_ctime; - compat_pid_t shm_cpid; - compat_pid_t shm_lpid; - compat_ulong_t shm_nattch; - compat_ulong_t __unused1; - compat_ulong_t __unused2; -}; - -#endif /* _ASM_COMPAT_H */ diff --git a/include/asm-mips/compiler.h b/include/asm-mips/compiler.h deleted file mode 100644 index 71f5c5cfc58a..000000000000 --- a/include/asm-mips/compiler.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2004, 2007 Maciej W. Rozycki - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef _ASM_COMPILER_H -#define _ASM_COMPILER_H - -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) -#define GCC_IMM_ASM() "n" -#define GCC_REG_ACCUM "$0" -#else -#define GCC_IMM_ASM() "rn" -#define GCC_REG_ACCUM "accum" -#endif - -#endif /* _ASM_COMPILER_H */ diff --git a/include/asm-mips/cpu-features.h b/include/asm-mips/cpu-features.h deleted file mode 100644 index 5ea701fc3425..000000000000 --- a/include/asm-mips/cpu-features.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2004 Ralf Baechle - * Copyright (C) 2004 Maciej W. Rozycki - */ -#ifndef __ASM_CPU_FEATURES_H -#define __ASM_CPU_FEATURES_H - -#include -#include -#include - -#ifndef current_cpu_type -#define current_cpu_type() current_cpu_data.cputype -#endif - -/* - * SMP assumption: Options of CPU 0 are a superset of all processors. - * This is true for all known MIPS systems. - */ -#ifndef cpu_has_tlb -#define cpu_has_tlb (cpu_data[0].options & MIPS_CPU_TLB) -#endif -#ifndef cpu_has_4kex -#define cpu_has_4kex (cpu_data[0].options & MIPS_CPU_4KEX) -#endif -#ifndef cpu_has_3k_cache -#define cpu_has_3k_cache (cpu_data[0].options & MIPS_CPU_3K_CACHE) -#endif -#define cpu_has_6k_cache 0 -#define cpu_has_8k_cache 0 -#ifndef cpu_has_4k_cache -#define cpu_has_4k_cache (cpu_data[0].options & MIPS_CPU_4K_CACHE) -#endif -#ifndef cpu_has_tx39_cache -#define cpu_has_tx39_cache (cpu_data[0].options & MIPS_CPU_TX39_CACHE) -#endif -#ifndef cpu_has_fpu -#define cpu_has_fpu (current_cpu_data.options & MIPS_CPU_FPU) -#define raw_cpu_has_fpu (raw_current_cpu_data.options & MIPS_CPU_FPU) -#else -#define raw_cpu_has_fpu cpu_has_fpu -#endif -#ifndef cpu_has_32fpr -#define cpu_has_32fpr (cpu_data[0].options & MIPS_CPU_32FPR) -#endif -#ifndef cpu_has_counter -#define cpu_has_counter (cpu_data[0].options & MIPS_CPU_COUNTER) -#endif -#ifndef cpu_has_watch -#define cpu_has_watch (cpu_data[0].options & MIPS_CPU_WATCH) -#endif -#ifndef cpu_has_divec -#define cpu_has_divec (cpu_data[0].options & MIPS_CPU_DIVEC) -#endif -#ifndef cpu_has_vce -#define cpu_has_vce (cpu_data[0].options & MIPS_CPU_VCE) -#endif -#ifndef cpu_has_cache_cdex_p -#define cpu_has_cache_cdex_p (cpu_data[0].options & MIPS_CPU_CACHE_CDEX_P) -#endif -#ifndef cpu_has_cache_cdex_s -#define cpu_has_cache_cdex_s (cpu_data[0].options & MIPS_CPU_CACHE_CDEX_S) -#endif -#ifndef cpu_has_prefetch -#define cpu_has_prefetch (cpu_data[0].options & MIPS_CPU_PREFETCH) -#endif -#ifndef cpu_has_mcheck -#define cpu_has_mcheck (cpu_data[0].options & MIPS_CPU_MCHECK) -#endif -#ifndef cpu_has_ejtag -#define cpu_has_ejtag (cpu_data[0].options & MIPS_CPU_EJTAG) -#endif -#ifndef cpu_has_llsc -#define cpu_has_llsc (cpu_data[0].options & MIPS_CPU_LLSC) -#endif -#ifndef cpu_has_mips16 -#define cpu_has_mips16 (cpu_data[0].ases & MIPS_ASE_MIPS16) -#endif -#ifndef cpu_has_mdmx -#define cpu_has_mdmx (cpu_data[0].ases & MIPS_ASE_MDMX) -#endif -#ifndef cpu_has_mips3d -#define cpu_has_mips3d (cpu_data[0].ases & MIPS_ASE_MIPS3D) -#endif -#ifndef cpu_has_smartmips -#define cpu_has_smartmips (cpu_data[0].ases & MIPS_ASE_SMARTMIPS) -#endif -#ifndef cpu_has_vtag_icache -#define cpu_has_vtag_icache (cpu_data[0].icache.flags & MIPS_CACHE_VTAG) -#endif -#ifndef cpu_has_dc_aliases -#define cpu_has_dc_aliases (cpu_data[0].dcache.flags & MIPS_CACHE_ALIASES) -#endif -#ifndef cpu_has_ic_fills_f_dc -#define cpu_has_ic_fills_f_dc (cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC) -#endif -#ifndef cpu_has_pindexed_dcache -#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) -#endif - -/* - * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors - * such as the R10000 have I-Caches that snoop local stores; the embedded ones - * don't. For maintaining I-cache coherency this means we need to flush the - * D-cache all the way back to whever the I-cache does refills from, so the - * I-cache has a chance to see the new data at all. Then we have to flush the - * I-cache also. - * Note we may have been rescheduled and may no longer be running on the CPU - * that did the store so we can't optimize this into only doing the flush on - * the local CPU. - */ -#ifndef cpu_icache_snoops_remote_store -#ifdef CONFIG_SMP -#define cpu_icache_snoops_remote_store (cpu_data[0].icache.flags & MIPS_IC_SNOOPS_REMOTE) -#else -#define cpu_icache_snoops_remote_store 1 -#endif -#endif - -# ifndef cpu_has_mips32r1 -# define cpu_has_mips32r1 (cpu_data[0].isa_level & MIPS_CPU_ISA_M32R1) -# endif -# ifndef cpu_has_mips32r2 -# define cpu_has_mips32r2 (cpu_data[0].isa_level & MIPS_CPU_ISA_M32R2) -# endif -# ifndef cpu_has_mips64r1 -# define cpu_has_mips64r1 (cpu_data[0].isa_level & MIPS_CPU_ISA_M64R1) -# endif -# ifndef cpu_has_mips64r2 -# define cpu_has_mips64r2 (cpu_data[0].isa_level & MIPS_CPU_ISA_M64R2) -# endif - -/* - * Shortcuts ... - */ -#define cpu_has_mips32 (cpu_has_mips32r1 | cpu_has_mips32r2) -#define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2) -#define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1) -#define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2) - -#ifndef cpu_has_dsp -#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP) -#endif - -#ifndef cpu_has_mipsmt -#define cpu_has_mipsmt (cpu_data[0].ases & MIPS_ASE_MIPSMT) -#endif - -#ifndef cpu_has_userlocal -#define cpu_has_userlocal (cpu_data[0].options & MIPS_CPU_ULRI) -#endif - -#ifdef CONFIG_32BIT -# ifndef cpu_has_nofpuex -# define cpu_has_nofpuex (cpu_data[0].options & MIPS_CPU_NOFPUEX) -# endif -# ifndef cpu_has_64bits -# define cpu_has_64bits (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT) -# endif -# ifndef cpu_has_64bit_zero_reg -# define cpu_has_64bit_zero_reg (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT) -# endif -# ifndef cpu_has_64bit_gp_regs -# define cpu_has_64bit_gp_regs 0 -# endif -# ifndef cpu_has_64bit_addresses -# define cpu_has_64bit_addresses 0 -# endif -#endif - -#ifdef CONFIG_64BIT -# ifndef cpu_has_nofpuex -# define cpu_has_nofpuex 0 -# endif -# ifndef cpu_has_64bits -# define cpu_has_64bits 1 -# endif -# ifndef cpu_has_64bit_zero_reg -# define cpu_has_64bit_zero_reg 1 -# endif -# ifndef cpu_has_64bit_gp_regs -# define cpu_has_64bit_gp_regs 1 -# endif -# ifndef cpu_has_64bit_addresses -# define cpu_has_64bit_addresses 1 -# endif -#endif - -#if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint) -# define cpu_has_vint (cpu_data[0].options & MIPS_CPU_VINT) -#elif !defined(cpu_has_vint) -# define cpu_has_vint 0 -#endif - -#if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic) -# define cpu_has_veic (cpu_data[0].options & MIPS_CPU_VEIC) -#elif !defined(cpu_has_veic) -# define cpu_has_veic 0 -#endif - -#ifndef cpu_has_inclusive_pcaches -#define cpu_has_inclusive_pcaches (cpu_data[0].options & MIPS_CPU_INCLUSIVE_CACHES) -#endif - -#ifndef cpu_dcache_line_size -#define cpu_dcache_line_size() cpu_data[0].dcache.linesz -#endif -#ifndef cpu_icache_line_size -#define cpu_icache_line_size() cpu_data[0].icache.linesz -#endif -#ifndef cpu_scache_line_size -#define cpu_scache_line_size() cpu_data[0].scache.linesz -#endif - -#endif /* __ASM_CPU_FEATURES_H */ diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h deleted file mode 100644 index 2de73dbb2e9e..000000000000 --- a/include/asm-mips/cpu-info.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 Waldorf GMBH - * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle - * Copyright (C) 1996 Paul M. Antoine - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - * Copyright (C) 2004 Maciej W. Rozycki - */ -#ifndef __ASM_CPU_INFO_H -#define __ASM_CPU_INFO_H - -#include - -/* - * Descriptor for a cache - */ -struct cache_desc { - unsigned int waysize; /* Bytes per way */ - unsigned short sets; /* Number of lines per set */ - unsigned char ways; /* Number of ways */ - unsigned char linesz; /* Size of line in bytes */ - unsigned char waybit; /* Bits to select in a cache set */ - unsigned char flags; /* Flags describing cache properties */ -}; - -/* - * Flag definitions - */ -#define MIPS_CACHE_NOT_PRESENT 0x00000001 -#define MIPS_CACHE_VTAG 0x00000002 /* Virtually tagged cache */ -#define MIPS_CACHE_ALIASES 0x00000004 /* Cache could have aliases */ -#define MIPS_CACHE_IC_F_DC 0x00000008 /* Ic can refill from D-cache */ -#define MIPS_IC_SNOOPS_REMOTE 0x00000010 /* Ic snoops remote stores */ -#define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */ - -struct cpuinfo_mips { - unsigned long udelay_val; - unsigned long asid_cache; - - /* - * Capability and feature descriptor structure for MIPS CPU - */ - unsigned long options; - unsigned long ases; - unsigned int processor_id; - unsigned int fpu_id; - unsigned int cputype; - int isa_level; - int tlbsize; - struct cache_desc icache; /* Primary I-cache */ - struct cache_desc dcache; /* Primary D or combined I/D cache */ - struct cache_desc scache; /* Secondary cache */ - struct cache_desc tcache; /* Tertiary/split secondary cache */ - int srsets; /* Shadow register sets */ - int core; /* physical core number */ -#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC) - /* - * In the MIPS MT "SMTC" model, each TC is considered - * to be a "CPU" for the purposes of scheduling, but - * exception resources, ASID spaces, etc, are common - * to all TCs within the same VPE. - */ - int vpe_id; /* Virtual Processor number */ -#endif -#ifdef CONFIG_MIPS_MT_SMTC - int tc_id; /* Thread Context number */ -#endif - void *data; /* Additional data */ -} __attribute__((aligned(SMP_CACHE_BYTES))); - -extern struct cpuinfo_mips cpu_data[]; -#define current_cpu_data cpu_data[smp_processor_id()] -#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] - -extern void cpu_probe(void); -extern void cpu_report(void); - -extern const char *__cpu_name[]; -#define cpu_name_string() __cpu_name[smp_processor_id()] - -#endif /* __ASM_CPU_INFO_H */ diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h deleted file mode 100644 index 229a786101d9..000000000000 --- a/include/asm-mips/cpu.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * cpu.h: Values of the PRId register used to match up - * various MIPS cpu types. - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - * Copyright (C) 2004 Maciej W. Rozycki - */ -#ifndef _ASM_CPU_H -#define _ASM_CPU_H - -/* Assigned Company values for bits 23:16 of the PRId Register - (CP0 register 15, select 0). As of the MIPS32 and MIPS64 specs from - MTI, the PRId register is defined in this (backwards compatible) - way: - - +----------------+----------------+----------------+----------------+ - | Company Options| Company ID | Processor ID | Revision | - +----------------+----------------+----------------+----------------+ - 31 24 23 16 15 8 7 - - I don't have docs for all the previous processors, but my impression is - that bits 16-23 have been 0 for all MIPS processors before the MIPS32/64 - spec. -*/ - -#define PRID_COMP_LEGACY 0x000000 -#define PRID_COMP_MIPS 0x010000 -#define PRID_COMP_BROADCOM 0x020000 -#define PRID_COMP_ALCHEMY 0x030000 -#define PRID_COMP_SIBYTE 0x040000 -#define PRID_COMP_SANDCRAFT 0x050000 -#define PRID_COMP_NXP 0x060000 -#define PRID_COMP_TOSHIBA 0x070000 -#define PRID_COMP_LSI 0x080000 -#define PRID_COMP_LEXRA 0x0b0000 - - -/* - * Assigned values for the product ID register. In order to detect a - * certain CPU type exactly eventually additional registers may need to - * be examined. These are valid when 23:16 == PRID_COMP_LEGACY - */ -#define PRID_IMP_R2000 0x0100 -#define PRID_IMP_AU1_REV1 0x0100 -#define PRID_IMP_AU1_REV2 0x0200 -#define PRID_IMP_R3000 0x0200 /* Same as R2000A */ -#define PRID_IMP_R6000 0x0300 /* Same as R3000A */ -#define PRID_IMP_R4000 0x0400 -#define PRID_IMP_R6000A 0x0600 -#define PRID_IMP_R10000 0x0900 -#define PRID_IMP_R4300 0x0b00 -#define PRID_IMP_VR41XX 0x0c00 -#define PRID_IMP_R12000 0x0e00 -#define PRID_IMP_R14000 0x0f00 -#define PRID_IMP_R8000 0x1000 -#define PRID_IMP_PR4450 0x1200 -#define PRID_IMP_R4600 0x2000 -#define PRID_IMP_R4700 0x2100 -#define PRID_IMP_TX39 0x2200 -#define PRID_IMP_R4640 0x2200 -#define PRID_IMP_R4650 0x2200 /* Same as R4640 */ -#define PRID_IMP_R5000 0x2300 -#define PRID_IMP_TX49 0x2d00 -#define PRID_IMP_SONIC 0x2400 -#define PRID_IMP_MAGIC 0x2500 -#define PRID_IMP_RM7000 0x2700 -#define PRID_IMP_NEVADA 0x2800 /* RM5260 ??? */ -#define PRID_IMP_RM9000 0x3400 -#define PRID_IMP_LOONGSON1 0x4200 -#define PRID_IMP_R5432 0x5400 -#define PRID_IMP_R5500 0x5500 -#define PRID_IMP_LOONGSON2 0x6300 - -#define PRID_IMP_UNKNOWN 0xff00 - -/* - * These are the PRID's for when 23:16 == PRID_COMP_MIPS - */ - -#define PRID_IMP_4KC 0x8000 -#define PRID_IMP_5KC 0x8100 -#define PRID_IMP_20KC 0x8200 -#define PRID_IMP_4KEC 0x8400 -#define PRID_IMP_4KSC 0x8600 -#define PRID_IMP_25KF 0x8800 -#define PRID_IMP_5KE 0x8900 -#define PRID_IMP_4KECR2 0x9000 -#define PRID_IMP_4KEMPR2 0x9100 -#define PRID_IMP_4KSD 0x9200 -#define PRID_IMP_24K 0x9300 -#define PRID_IMP_34K 0x9500 -#define PRID_IMP_24KE 0x9600 -#define PRID_IMP_74K 0x9700 -#define PRID_IMP_1004K 0x9900 - -/* - * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE - */ - -#define PRID_IMP_SB1 0x0100 -#define PRID_IMP_SB1A 0x1100 - -/* - * These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT - */ - -#define PRID_IMP_SR71000 0x0400 - -/* - * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM - */ - -#define PRID_IMP_BCM4710 0x4000 -#define PRID_IMP_BCM3302 0x9000 - -/* - * Definitions for 7:0 on legacy processors - */ - -#define PRID_REV_MASK 0x00ff - -#define PRID_REV_TX4927 0x0022 -#define PRID_REV_TX4937 0x0030 -#define PRID_REV_R4400 0x0040 -#define PRID_REV_R3000A 0x0030 -#define PRID_REV_R3000 0x0020 -#define PRID_REV_R2000A 0x0010 -#define PRID_REV_TX3912 0x0010 -#define PRID_REV_TX3922 0x0030 -#define PRID_REV_TX3927 0x0040 -#define PRID_REV_VR4111 0x0050 -#define PRID_REV_VR4181 0x0050 /* Same as VR4111 */ -#define PRID_REV_VR4121 0x0060 -#define PRID_REV_VR4122 0x0070 -#define PRID_REV_VR4181A 0x0070 /* Same as VR4122 */ -#define PRID_REV_VR4130 0x0080 -#define PRID_REV_34K_V1_0_2 0x0022 - -/* - * Older processors used to encode processor version and revision in two - * 4-bit bitfields, the 4K seems to simply count up and even newer MTI cores - * have switched to use the 8-bits as 3:3:2 bitfield with the last field as - * the patch number. *ARGH* - */ -#define PRID_REV_ENCODE_44(ver, rev) \ - ((ver) << 4 | (rev)) -#define PRID_REV_ENCODE_332(ver, rev, patch) \ - ((ver) << 5 | (rev) << 2 | (patch)) - -/* - * FPU implementation/revision register (CP1 control register 0). - * - * +---------------------------------+----------------+----------------+ - * | 0 | Implementation | Revision | - * +---------------------------------+----------------+----------------+ - * 31 16 15 8 7 0 - */ - -#define FPIR_IMP_NONE 0x0000 - -enum cpu_type_enum { - CPU_UNKNOWN, - - /* - * R2000 class processors - */ - CPU_R2000, CPU_R3000, CPU_R3000A, CPU_R3041, CPU_R3051, CPU_R3052, - CPU_R3081, CPU_R3081E, - - /* - * R6000 class processors - */ - CPU_R6000, CPU_R6000A, - - /* - * R4000 class processors - */ - CPU_R4000PC, CPU_R4000SC, CPU_R4000MC, CPU_R4200, CPU_R4300, CPU_R4310, - CPU_R4400PC, CPU_R4400SC, CPU_R4400MC, CPU_R4600, CPU_R4640, CPU_R4650, - CPU_R4700, CPU_R5000, CPU_R5000A, CPU_R5500, CPU_NEVADA, CPU_R5432, - CPU_R10000, CPU_R12000, CPU_R14000, CPU_VR41XX, CPU_VR4111, CPU_VR4121, - CPU_VR4122, CPU_VR4131, CPU_VR4133, CPU_VR4181, CPU_VR4181A, CPU_RM7000, - CPU_SR71000, CPU_RM9000, CPU_TX49XX, - - /* - * R8000 class processors - */ - CPU_R8000, - - /* - * TX3900 class processors - */ - CPU_TX3912, CPU_TX3922, CPU_TX3927, - - /* - * MIPS32 class processors - */ - CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K, - CPU_AU1000, CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500, - CPU_AU1550, CPU_PR4450, CPU_BCM3302, CPU_BCM4710, - - /* - * MIPS64 class processors - */ - CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, - - CPU_LAST -}; - - -/* - * ISA Level encodings - * - */ -#define MIPS_CPU_ISA_I 0x00000001 -#define MIPS_CPU_ISA_II 0x00000002 -#define MIPS_CPU_ISA_III 0x00000004 -#define MIPS_CPU_ISA_IV 0x00000008 -#define MIPS_CPU_ISA_V 0x00000010 -#define MIPS_CPU_ISA_M32R1 0x00000020 -#define MIPS_CPU_ISA_M32R2 0x00000040 -#define MIPS_CPU_ISA_M64R1 0x00000080 -#define MIPS_CPU_ISA_M64R2 0x00000100 - -#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \ - MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 ) -#define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \ - MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2) - -/* - * CPU Option encodings - */ -#define MIPS_CPU_TLB 0x00000001 /* CPU has TLB */ -#define MIPS_CPU_4KEX 0x00000002 /* "R4K" exception model */ -#define MIPS_CPU_3K_CACHE 0x00000004 /* R3000-style caches */ -#define MIPS_CPU_4K_CACHE 0x00000008 /* R4000-style caches */ -#define MIPS_CPU_TX39_CACHE 0x00000010 /* TX3900-style caches */ -#define MIPS_CPU_FPU 0x00000020 /* CPU has FPU */ -#define MIPS_CPU_32FPR 0x00000040 /* 32 dbl. prec. FP registers */ -#define MIPS_CPU_COUNTER 0x00000080 /* Cycle count/compare */ -#define MIPS_CPU_WATCH 0x00000100 /* watchpoint registers */ -#define MIPS_CPU_DIVEC 0x00000200 /* dedicated interrupt vector */ -#define MIPS_CPU_VCE 0x00000400 /* virt. coherence conflict possible */ -#define MIPS_CPU_CACHE_CDEX_P 0x00000800 /* Create_Dirty_Exclusive CACHE op */ -#define MIPS_CPU_CACHE_CDEX_S 0x00001000 /* ... same for seconary cache ... */ -#define MIPS_CPU_MCHECK 0x00002000 /* Machine check exception */ -#define MIPS_CPU_EJTAG 0x00004000 /* EJTAG exception */ -#define MIPS_CPU_NOFPUEX 0x00008000 /* no FPU exception */ -#define MIPS_CPU_LLSC 0x00010000 /* CPU has ll/sc instructions */ -#define MIPS_CPU_INCLUSIVE_CACHES 0x00020000 /* P-cache subset enforced */ -#define MIPS_CPU_PREFETCH 0x00040000 /* CPU has usable prefetch */ -#define MIPS_CPU_VINT 0x00080000 /* CPU supports MIPSR2 vectored interrupts */ -#define MIPS_CPU_VEIC 0x00100000 /* CPU supports MIPSR2 external interrupt controller mode */ -#define MIPS_CPU_ULRI 0x00200000 /* CPU has ULRI feature */ - -/* - * CPU ASE encodings - */ -#define MIPS_ASE_MIPS16 0x00000001 /* code compression */ -#define MIPS_ASE_MDMX 0x00000002 /* MIPS digital media extension */ -#define MIPS_ASE_MIPS3D 0x00000004 /* MIPS-3D */ -#define MIPS_ASE_SMARTMIPS 0x00000008 /* SmartMIPS */ -#define MIPS_ASE_DSP 0x00000010 /* Signal Processing ASE */ -#define MIPS_ASE_MIPSMT 0x00000020 /* CPU supports MIPS MT */ - - -#endif /* _ASM_CPU_H */ diff --git a/include/asm-mips/cputime.h b/include/asm-mips/cputime.h deleted file mode 100644 index c00eacbdd979..000000000000 --- a/include/asm-mips/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __MIPS_CPUTIME_H -#define __MIPS_CPUTIME_H - -#include - -#endif /* __MIPS_CPUTIME_H */ diff --git a/include/asm-mips/current.h b/include/asm-mips/current.h deleted file mode 100644 index 559db66b9790..000000000000 --- a/include/asm-mips/current.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2002 Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_CURRENT_H -#define _ASM_CURRENT_H - -#include - -struct task_struct; - -static inline struct task_struct * get_current(void) -{ - return current_thread_info()->task; -} - -#define current get_current() - -#endif /* _ASM_CURRENT_H */ diff --git a/include/asm-mips/debug.h b/include/asm-mips/debug.h deleted file mode 100644 index 1fd5a2b39445..000000000000 --- a/include/asm-mips/debug.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Debug macros for run-time debugging. - * Turned on/off with CONFIG_RUNTIME_DEBUG option. - * - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _ASM_DEBUG_H -#define _ASM_DEBUG_H - - -/* - * run-time macros for catching spurious errors. Eable CONFIG_RUNTIME_DEBUG in - * kernel hacking config menu to use them. - * - * Use them as run-time debugging aid. NEVER USE THEM AS ERROR HANDLING CODE!!! - */ - -#ifdef CONFIG_RUNTIME_DEBUG - -#include - -#define db_assert(x) if (!(x)) { \ - panic("assertion failed at %s:%d: %s", __FILE__, __LINE__, #x); } -#define db_warn(x) if (!(x)) { \ - printk(KERN_WARNING "warning at %s:%d: %s", __FILE__, __LINE__, #x); } -#define db_verify(x, y) db_assert(x y) -#define db_verify_warn(x, y) db_warn(x y) -#define db_run(x) do { x; } while (0) - -#else - -#define db_assert(x) -#define db_warn(x) -#define db_verify(x, y) x -#define db_verify_warn(x, y) x -#define db_run(x) - -#endif - -#endif /* _ASM_DEBUG_H */ diff --git a/include/asm-mips/dec/ecc.h b/include/asm-mips/dec/ecc.h deleted file mode 100644 index 707ffdbc9add..000000000000 --- a/include/asm-mips/dec/ecc.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * include/asm-mips/dec/ecc.h - * - * ECC handling logic definitions common to DECstation/DECsystem - * 5000/200 (KN02), 5000/240 (KN03), 5000/260 (KN05) and - * DECsystem 5900 (KN03), 5900/260 (KN05) systems. - * - * Copyright (C) 2003 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_MIPS_DEC_ECC_H -#define __ASM_MIPS_DEC_ECC_H - -/* - * Error Address Register bits. - * The register is r/wc -- any write clears it. - */ -#define KN0X_EAR_VALID (1<<31) /* error data valid, bus IRQ */ -#define KN0X_EAR_CPU (1<<30) /* CPU/DMA transaction */ -#define KN0X_EAR_WRITE (1<<29) /* write/read transaction */ -#define KN0X_EAR_ECCERR (1<<28) /* ECC/timeout or overrun */ -#define KN0X_EAR_RES_27 (1<<27) /* unused */ -#define KN0X_EAR_ADDRESS (0x7ffffff<<0) /* address involved */ - -/* - * Error Syndrome Register bits. - * The register is frozen when EAR.VALID is set, otherwise it records bits - * from the last memory read. The register is r/wc -- any write clears it. - */ -#define KN0X_ESR_VLDHI (1<<31) /* error data valid hi word */ -#define KN0X_ESR_CHKHI (0x7f<<24) /* check bits read from mem */ -#define KN0X_ESR_SNGHI (1<<23) /* single/double bit error */ -#define KN0X_ESR_SYNHI (0x7f<<16) /* syndrome from ECC logic */ -#define KN0X_ESR_VLDLO (1<<15) /* error data valid lo word */ -#define KN0X_ESR_CHKLO (0x7f<<8) /* check bits read from mem */ -#define KN0X_ESR_SNGLO (1<<7) /* single/double bit error */ -#define KN0X_ESR_SYNLO (0x7f<<0) /* syndrome from ECC logic */ - - -#ifndef __ASSEMBLY__ - -#include - -struct pt_regs; - -extern void dec_ecc_be_init(void); -extern int dec_ecc_be_handler(struct pt_regs *regs, int is_fixup); -extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id); -#endif - -#endif /* __ASM_MIPS_DEC_ECC_H */ diff --git a/include/asm-mips/dec/interrupts.h b/include/asm-mips/dec/interrupts.h deleted file mode 100644 index e10d341067c8..000000000000 --- a/include/asm-mips/dec/interrupts.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Miscellaneous definitions used to initialise the interrupt vector table - * with the machine-specific interrupt routines. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1997 by Paul M. Antoine. - * reworked 1998 by Harald Koerfgen. - * Copyright (C) 2001, 2002, 2003 Maciej W. Rozycki - */ - -#ifndef __ASM_DEC_INTERRUPTS_H -#define __ASM_DEC_INTERRUPTS_H - -#include -#include - - -/* - * The list of possible system devices which provide an - * interrupt. Not all devices exist on a given system. - */ -#define DEC_IRQ_CASCADE 0 /* cascade from CSR or I/O ASIC */ - -/* Ordinary interrupts */ -#define DEC_IRQ_AB_RECV 1 /* ACCESS.bus receive */ -#define DEC_IRQ_AB_XMIT 2 /* ACCESS.bus transmit */ -#define DEC_IRQ_DZ11 3 /* DZ11 (DC7085) serial */ -#define DEC_IRQ_ASC 4 /* ASC (NCR53C94) SCSI */ -#define DEC_IRQ_FLOPPY 5 /* 82077 FDC */ -#define DEC_IRQ_FPU 6 /* R3k FPU */ -#define DEC_IRQ_HALT 7 /* HALT button or from ACCESS.Bus */ -#define DEC_IRQ_ISDN 8 /* Am79C30A ISDN */ -#define DEC_IRQ_LANCE 9 /* LANCE (Am7990) Ethernet */ -#define DEC_IRQ_BUS 10 /* memory, I/O bus read/write errors */ -#define DEC_IRQ_PSU 11 /* power supply unit warning */ -#define DEC_IRQ_RTC 12 /* DS1287 RTC */ -#define DEC_IRQ_SCC0 13 /* SCC (Z85C30) serial #0 */ -#define DEC_IRQ_SCC1 14 /* SCC (Z85C30) serial #1 */ -#define DEC_IRQ_SII 15 /* SII (DC7061) SCSI */ -#define DEC_IRQ_TC0 16 /* TURBOchannel slot #0 */ -#define DEC_IRQ_TC1 17 /* TURBOchannel slot #1 */ -#define DEC_IRQ_TC2 18 /* TURBOchannel slot #2 */ -#define DEC_IRQ_TIMER 19 /* ARC periodic timer */ -#define DEC_IRQ_VIDEO 20 /* framebuffer */ - -/* I/O ASIC DMA interrupts */ -#define DEC_IRQ_ASC_MERR 21 /* ASC memory read error */ -#define DEC_IRQ_ASC_ERR 22 /* ASC page overrun */ -#define DEC_IRQ_ASC_DMA 23 /* ASC buffer pointer loaded */ -#define DEC_IRQ_FLOPPY_ERR 24 /* FDC error */ -#define DEC_IRQ_ISDN_ERR 25 /* ISDN memory read/overrun error */ -#define DEC_IRQ_ISDN_RXDMA 26 /* ISDN recv buffer pointer loaded */ -#define DEC_IRQ_ISDN_TXDMA 27 /* ISDN xmit buffer pointer loaded */ -#define DEC_IRQ_LANCE_MERR 28 /* LANCE memory read error */ -#define DEC_IRQ_SCC0A_RXERR 29 /* SCC0A (printer) receive overrun */ -#define DEC_IRQ_SCC0A_RXDMA 30 /* SCC0A receive half page */ -#define DEC_IRQ_SCC0A_TXERR 31 /* SCC0A xmit memory read/overrun */ -#define DEC_IRQ_SCC0A_TXDMA 32 /* SCC0A transmit page end */ -#define DEC_IRQ_AB_RXERR 33 /* ACCESS.bus receive overrun */ -#define DEC_IRQ_AB_RXDMA 34 /* ACCESS.bus receive half page */ -#define DEC_IRQ_AB_TXERR 35 /* ACCESS.bus xmit memory read/ovrn */ -#define DEC_IRQ_AB_TXDMA 36 /* ACCESS.bus transmit page end */ -#define DEC_IRQ_SCC1A_RXERR 37 /* SCC1A (modem) receive overrun */ -#define DEC_IRQ_SCC1A_RXDMA 38 /* SCC1A receive half page */ -#define DEC_IRQ_SCC1A_TXERR 39 /* SCC1A xmit memory read/overrun */ -#define DEC_IRQ_SCC1A_TXDMA 40 /* SCC1A transmit page end */ - -/* TC5 & TC6 are virtual slots for KN02's onboard devices */ -#define DEC_IRQ_TC5 DEC_IRQ_ASC /* virtual PMAZ-AA */ -#define DEC_IRQ_TC6 DEC_IRQ_LANCE /* virtual PMAD-AA */ - -#define DEC_NR_INTS 41 - - -/* Largest of cpu mask_nr tables. */ -#define DEC_MAX_CPU_INTS 6 -/* Largest of asic mask_nr tables. */ -#define DEC_MAX_ASIC_INTS 9 - - -/* - * CPU interrupt bits common to all systems. - */ -#define DEC_CPU_INR_FPU 7 /* R3k FPU */ -#define DEC_CPU_INR_SW1 1 /* software #1 */ -#define DEC_CPU_INR_SW0 0 /* software #0 */ - -#define DEC_CPU_IRQ_BASE MIPS_CPU_IRQ_BASE /* first IRQ assigned to CPU */ - -#define DEC_CPU_IRQ_NR(n) ((n) + DEC_CPU_IRQ_BASE) -#define DEC_CPU_IRQ_MASK(n) (1 << ((n) + CAUSEB_IP)) -#define DEC_CPU_IRQ_ALL (0xff << CAUSEB_IP) - - -#ifndef __ASSEMBLY__ - -/* - * Interrupt table structures to hide differences between systems. - */ -typedef union { int i; void *p; } int_ptr; -extern int dec_interrupt[DEC_NR_INTS]; -extern int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2]; -extern int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2]; -extern int cpu_fpu_mask; - - -/* - * Common interrupt routine prototypes for all DECStations - */ -extern void kn02_io_int(void); -extern void kn02xa_io_int(void); -extern void kn03_io_int(void); -extern void asic_dma_int(void); -extern void asic_all_int(void); -extern void kn02_all_int(void); -extern void cpu_all_int(void); - -extern void dec_intr_unimplemented(void); -extern void asic_intr_unimplemented(void); - -#endif /* __ASSEMBLY__ */ - -#endif diff --git a/include/asm-mips/dec/ioasic.h b/include/asm-mips/dec/ioasic.h deleted file mode 100644 index 98badd6bf22d..000000000000 --- a/include/asm-mips/dec/ioasic.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * include/asm-mips/dec/ioasic.h - * - * DEC I/O ASIC access operations. - * - * Copyright (C) 2000, 2002, 2003 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ASM_DEC_IOASIC_H -#define __ASM_DEC_IOASIC_H - -#include -#include - -extern spinlock_t ioasic_ssr_lock; - -extern volatile u32 *ioasic_base; - -static inline void ioasic_write(unsigned int reg, u32 v) -{ - ioasic_base[reg / 4] = v; -} - -static inline u32 ioasic_read(unsigned int reg) -{ - return ioasic_base[reg / 4]; -} - -extern void init_ioasic_irqs(int base); - -extern void dec_ioasic_clocksource_init(void); - -#endif /* __ASM_DEC_IOASIC_H */ diff --git a/include/asm-mips/dec/ioasic_addrs.h b/include/asm-mips/dec/ioasic_addrs.h deleted file mode 100644 index 4cbc1f8a1129..000000000000 --- a/include/asm-mips/dec/ioasic_addrs.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Definitions for the address map in the JUNKIO Asic - * - * Created with Information from: - * - * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual" - * - * and the Mach Sources - * - * Copyright (C) 199x the Anonymous - * Copyright (C) 2002, 2003 Maciej W. Rozycki - */ - -#ifndef __ASM_MIPS_DEC_IOASIC_ADDRS_H -#define __ASM_MIPS_DEC_IOASIC_ADDRS_H - -#define IOASIC_SLOT_SIZE 0x00040000 - -/* - * Address ranges decoded by the I/O ASIC for onboard devices. - */ -#define IOASIC_SYS_ROM (0*IOASIC_SLOT_SIZE) /* system board ROM */ -#define IOASIC_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */ -#define IOASIC_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */ -#define IOASIC_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */ -#define IOASIC_SCC0 (4*IOASIC_SLOT_SIZE) /* SCC #0 */ -#define IOASIC_VDAC_HI (5*IOASIC_SLOT_SIZE) /* VDAC (maxine) */ -#define IOASIC_SCC1 (6*IOASIC_SLOT_SIZE) /* SCC #1 (3min, 3max+) */ -#define IOASIC_VDAC_LO (7*IOASIC_SLOT_SIZE) /* VDAC (maxine) */ -#define IOASIC_TOY (8*IOASIC_SLOT_SIZE) /* RTC */ -#define IOASIC_ISDN (9*IOASIC_SLOT_SIZE) /* ISDN (maxine) */ -#define IOASIC_ERRADDR (9*IOASIC_SLOT_SIZE) /* bus error address (3max+) */ -#define IOASIC_CHKSYN (10*IOASIC_SLOT_SIZE) /* ECC syndrome (3max+) */ -#define IOASIC_ACC_BUS (10*IOASIC_SLOT_SIZE) /* ACCESS.bus (maxine) */ -#define IOASIC_MCR (11*IOASIC_SLOT_SIZE) /* memory control (3max+) */ -#define IOASIC_FLOPPY (11*IOASIC_SLOT_SIZE) /* FDC (maxine) */ -#define IOASIC_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */ -#define IOASIC_FDC_DMA (13*IOASIC_SLOT_SIZE) /* FDC DMA (maxine) */ -#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE) /* ??? */ -#define IOASIC_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */ - - -/* - * Offsets for I/O ASIC registers - * (relative to (dec_kn_slot_base + IOASIC_IOCTL)). - */ - /* all systems */ -#define IO_REG_SCSI_DMA_P 0x00 /* SCSI DMA Pointer */ -#define IO_REG_SCSI_DMA_BP 0x10 /* SCSI DMA Buffer Pointer */ -#define IO_REG_LANCE_DMA_P 0x20 /* LANCE DMA Pointer */ -#define IO_REG_SCC0A_T_DMA_P 0x30 /* SCC0A Transmit DMA Pointer */ -#define IO_REG_SCC0A_R_DMA_P 0x40 /* SCC0A Receive DMA Pointer */ - - /* except Maxine */ -#define IO_REG_SCC1A_T_DMA_P 0x50 /* SCC1A Transmit DMA Pointer */ -#define IO_REG_SCC1A_R_DMA_P 0x60 /* SCC1A Receive DMA Pointer */ - - /* Maxine */ -#define IO_REG_AB_T_DMA_P 0x50 /* ACCESS.bus Transmit DMA Pointer */ -#define IO_REG_AB_R_DMA_P 0x60 /* ACCESS.bus Receive DMA Pointer */ -#define IO_REG_FLOPPY_DMA_P 0x70 /* Floppy DMA Pointer */ -#define IO_REG_ISDN_T_DMA_P 0x80 /* ISDN Transmit DMA Pointer */ -#define IO_REG_ISDN_T_DMA_BP 0x90 /* ISDN Transmit DMA Buffer Pointer */ -#define IO_REG_ISDN_R_DMA_P 0xa0 /* ISDN Receive DMA Pointer */ -#define IO_REG_ISDN_R_DMA_BP 0xb0 /* ISDN Receive DMA Buffer Pointer */ - - /* all systems */ -#define IO_REG_DATA_0 0xc0 /* System Data Buffer 0 */ -#define IO_REG_DATA_1 0xd0 /* System Data Buffer 1 */ -#define IO_REG_DATA_2 0xe0 /* System Data Buffer 2 */ -#define IO_REG_DATA_3 0xf0 /* System Data Buffer 3 */ - - /* all systems */ -#define IO_REG_SSR 0x100 /* System Support Register */ -#define IO_REG_SIR 0x110 /* System Interrupt Register */ -#define IO_REG_SIMR 0x120 /* System Interrupt Mask Reg. */ -#define IO_REG_SAR 0x130 /* System Address Register */ - - /* Maxine */ -#define IO_REG_ISDN_T_DATA 0x140 /* ISDN Xmit Data Register */ -#define IO_REG_ISDN_R_DATA 0x150 /* ISDN Receive Data Register */ - - /* all systems */ -#define IO_REG_LANCE_SLOT 0x160 /* LANCE I/O Slot Register */ -#define IO_REG_SCSI_SLOT 0x170 /* SCSI Slot Register */ -#define IO_REG_SCC0A_SLOT 0x180 /* SCC0A DMA Slot Register */ - - /* except Maxine */ -#define IO_REG_SCC1A_SLOT 0x190 /* SCC1A DMA Slot Register */ - - /* Maxine */ -#define IO_REG_AB_SLOT 0x190 /* ACCESS.bus DMA Slot Register */ -#define IO_REG_FLOPPY_SLOT 0x1a0 /* Floppy Slot Register */ - - /* all systems */ -#define IO_REG_SCSI_SCR 0x1b0 /* SCSI Partial-Word DMA Control */ -#define IO_REG_SCSI_SDR0 0x1c0 /* SCSI DMA Partial Word 0 */ -#define IO_REG_SCSI_SDR1 0x1d0 /* SCSI DMA Partial Word 1 */ -#define IO_REG_FCTR 0x1e0 /* Free-Running Counter */ -#define IO_REG_RES_31 0x1f0 /* unused */ - - -/* - * The upper 16 bits of the System Support Register are a part of the - * I/O ASIC's internal DMA engine and thus are common to all I/O ASIC - * machines. The exception is the Maxine, which makes use of the - * FLOPPY and ISDN bits (otherwise unused) and has a different SCC - * wiring. - */ - /* all systems */ -#define IO_SSR_SCC0A_TX_DMA_EN (1<<31) /* SCC0A transmit DMA enable */ -#define IO_SSR_SCC0A_RX_DMA_EN (1<<30) /* SCC0A receive DMA enable */ -#define IO_SSR_RES_27 (1<<27) /* unused */ -#define IO_SSR_RES_26 (1<<26) /* unused */ -#define IO_SSR_RES_25 (1<<25) /* unused */ -#define IO_SSR_RES_24 (1<<24) /* unused */ -#define IO_SSR_RES_23 (1<<23) /* unused */ -#define IO_SSR_SCSI_DMA_DIR (1<<18) /* SCSI DMA direction */ -#define IO_SSR_SCSI_DMA_EN (1<<17) /* SCSI DMA enable */ -#define IO_SSR_LANCE_DMA_EN (1<<16) /* LANCE DMA enable */ - - /* except Maxine */ -#define IO_SSR_SCC1A_TX_DMA_EN (1<<29) /* SCC1A transmit DMA enable */ -#define IO_SSR_SCC1A_RX_DMA_EN (1<<28) /* SCC1A receive DMA enable */ -#define IO_SSR_RES_22 (1<<22) /* unused */ -#define IO_SSR_RES_21 (1<<21) /* unused */ -#define IO_SSR_RES_20 (1<<20) /* unused */ -#define IO_SSR_RES_19 (1<<19) /* unused */ - - /* Maxine */ -#define IO_SSR_AB_TX_DMA_EN (1<<29) /* ACCESS.bus xmit DMA enable */ -#define IO_SSR_AB_RX_DMA_EN (1<<28) /* ACCESS.bus recv DMA enable */ -#define IO_SSR_FLOPPY_DMA_DIR (1<<22) /* Floppy DMA direction */ -#define IO_SSR_FLOPPY_DMA_EN (1<<21) /* Floppy DMA enable */ -#define IO_SSR_ISDN_TX_DMA_EN (1<<20) /* ISDN transmit DMA enable */ -#define IO_SSR_ISDN_RX_DMA_EN (1<<19) /* ISDN receive DMA enable */ - -/* - * The lower 16 bits are system-specific. Bits 15,11:8 are common and - * defined here. The rest is defined in system-specific headers. - */ -#define KN0X_IO_SSR_DIAGDN (1<<15) /* diagnostic jumper */ -#define KN0X_IO_SSR_SCC_RST (1<<11) /* ~SCC0,1 (Z85C30) reset */ -#define KN0X_IO_SSR_RTC_RST (1<<10) /* ~RTC (DS1287) reset */ -#define KN0X_IO_SSR_ASC_RST (1<<9) /* ~ASC (NCR53C94) reset */ -#define KN0X_IO_SSR_LANCE_RST (1<<8) /* ~LANCE (Am7990) reset */ - -#endif /* __ASM_MIPS_DEC_IOASIC_ADDRS_H */ diff --git a/include/asm-mips/dec/ioasic_ints.h b/include/asm-mips/dec/ioasic_ints.h deleted file mode 100644 index 9aaa9869615f..000000000000 --- a/include/asm-mips/dec/ioasic_ints.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Definitions for the interrupt related bits in the I/O ASIC - * interrupt status register (and the interrupt mask register, of course) - * - * Created with Information from: - * - * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual" - * - * and the Mach Sources - * - * Copyright (C) 199x the Anonymous - * Copyright (C) 2002 Maciej W. Rozycki - */ - -#ifndef __ASM_DEC_IOASIC_INTS_H -#define __ASM_DEC_IOASIC_INTS_H - -/* - * The upper 16 bits are a part of the I/O ASIC's internal DMA engine - * and thus are common to all I/O ASIC machines. The exception is - * the Maxine, which makes use of the FLOPPY and ISDN bits (otherwise - * unused) and has a different SCC wiring. - */ - /* all systems */ -#define IO_INR_SCC0A_TXDMA 31 /* SCC0A transmit page end */ -#define IO_INR_SCC0A_TXERR 30 /* SCC0A transmit memory read error */ -#define IO_INR_SCC0A_RXDMA 29 /* SCC0A receive half page */ -#define IO_INR_SCC0A_RXERR 28 /* SCC0A receive overrun */ -#define IO_INR_ASC_DMA 19 /* ASC buffer pointer loaded */ -#define IO_INR_ASC_ERR 18 /* ASC page overrun */ -#define IO_INR_ASC_MERR 17 /* ASC memory read error */ -#define IO_INR_LANCE_MERR 16 /* LANCE memory read error */ - - /* except Maxine */ -#define IO_INR_SCC1A_TXDMA 27 /* SCC1A transmit page end */ -#define IO_INR_SCC1A_TXERR 26 /* SCC1A transmit memory read error */ -#define IO_INR_SCC1A_RXDMA 25 /* SCC1A receive half page */ -#define IO_INR_SCC1A_RXERR 24 /* SCC1A receive overrun */ -#define IO_INR_RES_23 23 /* unused */ -#define IO_INR_RES_22 22 /* unused */ -#define IO_INR_RES_21 21 /* unused */ -#define IO_INR_RES_20 20 /* unused */ - - /* Maxine */ -#define IO_INR_AB_TXDMA 27 /* ACCESS.bus transmit page end */ -#define IO_INR_AB_TXERR 26 /* ACCESS.bus xmit memory read error */ -#define IO_INR_AB_RXDMA 25 /* ACCESS.bus receive half page */ -#define IO_INR_AB_RXERR 24 /* ACCESS.bus receive overrun */ -#define IO_INR_FLOPPY_ERR 23 /* FDC error */ -#define IO_INR_ISDN_TXDMA 22 /* ISDN xmit buffer pointer loaded */ -#define IO_INR_ISDN_RXDMA 21 /* ISDN recv buffer pointer loaded */ -#define IO_INR_ISDN_ERR 20 /* ISDN memory read/overrun error */ - -#define IO_INR_DMA 16 /* first DMA IRQ */ - -/* - * The lower 16 bits are system-specific and thus defined in - * system-specific headers. - */ - - -#define IO_IRQ_BASE 8 /* first IRQ assigned to I/O ASIC */ -#define IO_IRQ_LINES 32 /* number of I/O ASIC interrupts */ - -#define IO_IRQ_NR(n) ((n) + IO_IRQ_BASE) -#define IO_IRQ_MASK(n) (1 << (n)) -#define IO_IRQ_ALL 0x0000ffff -#define IO_IRQ_DMA 0xffff0000 - -#endif /* __ASM_DEC_IOASIC_INTS_H */ diff --git a/include/asm-mips/dec/kn01.h b/include/asm-mips/dec/kn01.h deleted file mode 100644 index 28fa717ac423..000000000000 --- a/include/asm-mips/dec/kn01.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Hardware info about DECstation DS2100/3100 systems (otherwise known as - * pmin/pmax or KN01). - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions - * are by courtesy of Chris Fraser. - * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki - */ -#ifndef __ASM_MIPS_DEC_KN01_H -#define __ASM_MIPS_DEC_KN01_H - -#define KN01_SLOT_BASE 0x10000000 -#define KN01_SLOT_SIZE 0x01000000 - -/* - * Address ranges for devices. - */ -#define KN01_PMASK (0*KN01_SLOT_SIZE) /* color plane mask */ -#define KN01_PCC (1*KN01_SLOT_SIZE) /* PCC (DC503) cursor */ -#define KN01_VDAC (2*KN01_SLOT_SIZE) /* color map */ -#define KN01_RES_3 (3*KN01_SLOT_SIZE) /* unused */ -#define KN01_RES_4 (4*KN01_SLOT_SIZE) /* unused */ -#define KN01_RES_5 (5*KN01_SLOT_SIZE) /* unused */ -#define KN01_RES_6 (6*KN01_SLOT_SIZE) /* unused */ -#define KN01_ERRADDR (7*KN01_SLOT_SIZE) /* write error address */ -#define KN01_LANCE (8*KN01_SLOT_SIZE) /* LANCE (Am7990) Ethernet */ -#define KN01_LANCE_MEM (9*KN01_SLOT_SIZE) /* LANCE buffer memory */ -#define KN01_SII (10*KN01_SLOT_SIZE) /* SII (DC7061) SCSI */ -#define KN01_SII_MEM (11*KN01_SLOT_SIZE) /* SII buffer memory */ -#define KN01_DZ11 (12*KN01_SLOT_SIZE) /* DZ11 (DC7085) serial */ -#define KN01_RTC (13*KN01_SLOT_SIZE) /* DS1287 RTC (bytes #0) */ -#define KN01_ESAR (13*KN01_SLOT_SIZE) /* MAC address (bytes #1) */ -#define KN01_CSR (14*KN01_SLOT_SIZE) /* system ctrl & status reg */ -#define KN01_SYS_ROM (15*KN01_SLOT_SIZE) /* system board ROM */ - - -/* - * Frame buffer memory address. - */ -#define KN01_VFB_MEM 0x0fc00000 - -/* - * CPU interrupt bits. - */ -#define KN01_CPU_INR_BUS 6 /* memory, I/O bus read/write errors */ -#define KN01_CPU_INR_VIDEO 6 /* PCC area detect #2 */ -#define KN01_CPU_INR_RTC 5 /* DS1287 RTC */ -#define KN01_CPU_INR_DZ11 4 /* DZ11 (DC7085) serial */ -#define KN01_CPU_INR_LANCE 3 /* LANCE (Am7990) Ethernet */ -#define KN01_CPU_INR_SII 2 /* SII (DC7061) SCSI */ - - -/* - * System Control & Status Register bits. - */ -#define KN01_CSR_MNFMOD (1<<15) /* MNFMOD manufacturing jumper */ -#define KN01_CSR_STATUS (1<<14) /* self-test result status output */ -#define KN01_CSR_PARDIS (1<<13) /* parity error disable */ -#define KN01_CSR_CRSRTST (1<<12) /* PCC test output */ -#define KN01_CSR_MONO (1<<11) /* mono/color fb SIMM installed */ -#define KN01_CSR_MEMERR (1<<10) /* write timeout error status & ack*/ -#define KN01_CSR_VINT (1<<9) /* PCC area detect #2 status & ack */ -#define KN01_CSR_TXDIS (1<<8) /* DZ11 transmit disable */ -#define KN01_CSR_VBGTRG (1<<2) /* blue DAC voltage over green (r/o) */ -#define KN01_CSR_VRGTRG (1<<1) /* red DAC voltage over green (r/o) */ -#define KN01_CSR_VRGTRB (1<<0) /* red DAC voltage over blue (r/o) */ -#define KN01_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */ - - -#ifndef __ASSEMBLY__ - -#include -#include -#include - -struct pt_regs; - -extern u16 cached_kn01_csr; -extern spinlock_t kn01_lock; - -extern void dec_kn01_be_init(void); -extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup); -extern irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id); -#endif - -#endif /* __ASM_MIPS_DEC_KN01_H */ diff --git a/include/asm-mips/dec/kn02.h b/include/asm-mips/dec/kn02.h deleted file mode 100644 index 93430b5f4724..000000000000 --- a/include/asm-mips/dec/kn02.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Hardware info about DECstation 5000/200 systems (otherwise known as - * 3max or KN02). - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions - * are by courtesy of Chris Fraser. - * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki - */ -#ifndef __ASM_MIPS_DEC_KN02_H -#define __ASM_MIPS_DEC_KN02_H - -#define KN02_SLOT_BASE 0x1fc00000 -#define KN02_SLOT_SIZE 0x00080000 - -/* - * Address ranges decoded by the "system slot" logic for onboard devices. - */ -#define KN02_SYS_ROM (0*KN02_SLOT_SIZE) /* system board ROM */ -#define KN02_RES_1 (1*KN02_SLOT_SIZE) /* unused */ -#define KN02_CHKSYN (2*KN02_SLOT_SIZE) /* ECC syndrome */ -#define KN02_ERRADDR (3*KN02_SLOT_SIZE) /* bus error address */ -#define KN02_DZ11 (4*KN02_SLOT_SIZE) /* DZ11 (DC7085) serial */ -#define KN02_RTC (5*KN02_SLOT_SIZE) /* DS1287 RTC */ -#define KN02_CSR (6*KN02_SLOT_SIZE) /* system ctrl & status reg */ -#define KN02_SYS_ROM_7 (7*KN02_SLOT_SIZE) /* system board ROM (alias) */ - - -/* - * System Control & Status Register bits. - */ -#define KN02_CSR_RES_28 (0xf<<28) /* unused */ -#define KN02_CSR_PSU (1<<27) /* power supply unit warning */ -#define KN02_CSR_NVRAM (1<<26) /* ~NVRAM clear jumper */ -#define KN02_CSR_REFEVEN (1<<25) /* mem refresh bank toggle */ -#define KN02_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */ -#define KN02_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */ -#define KN02_CSR_DIAGCHK (1<<15) /* diagn/norml ECC reads */ -#define KN02_CSR_DIAGGEN (1<<14) /* diagn/norml ECC writes */ -#define KN02_CSR_CORRECT (1<<13) /* ECC correct/check */ -#define KN02_CSR_LEDIAG (1<<12) /* ECC diagn. latch strobe */ -#define KN02_CSR_TXDIS (1<<11) /* DZ11 transmit disable */ -#define KN02_CSR_BNK32M (1<<10) /* 32M/8M stride */ -#define KN02_CSR_DIAGDN (1<<9) /* DIAGDN manufact. jumper */ -#define KN02_CSR_BAUD38 (1<<8) /* DZ11 38/19kbps ext. rate */ -#define KN02_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */ -#define KN02_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */ - - -/* - * CPU interrupt bits. - */ -#define KN02_CPU_INR_RES_6 6 /* unused */ -#define KN02_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */ -#define KN02_CPU_INR_RES_4 4 /* unused */ -#define KN02_CPU_INR_RTC 3 /* DS1287 RTC */ -#define KN02_CPU_INR_CASCADE 2 /* CSR cascade */ - -/* - * CSR interrupt bits. - */ -#define KN02_CSR_INR_DZ11 7 /* DZ11 (DC7085) serial */ -#define KN02_CSR_INR_LANCE 6 /* LANCE (Am7990) Ethernet */ -#define KN02_CSR_INR_ASC 5 /* ASC (NCR53C94) SCSI */ -#define KN02_CSR_INR_RES_4 4 /* unused */ -#define KN02_CSR_INR_RES_3 3 /* unused */ -#define KN02_CSR_INR_TC2 2 /* TURBOchannel slot #2 */ -#define KN02_CSR_INR_TC1 1 /* TURBOchannel slot #1 */ -#define KN02_CSR_INR_TC0 0 /* TURBOchannel slot #0 */ - - -#define KN02_IRQ_BASE 8 /* first IRQ assigned to CSR */ -#define KN02_IRQ_LINES 8 /* number of CSR interrupts */ - -#define KN02_IRQ_NR(n) ((n) + KN02_IRQ_BASE) -#define KN02_IRQ_MASK(n) (1 << (n)) -#define KN02_IRQ_ALL 0xff - - -#ifndef __ASSEMBLY__ - -#include - -extern u32 cached_kn02_csr; -extern void init_kn02_irqs(int base); -#endif - -#endif /* __ASM_MIPS_DEC_KN02_H */ diff --git a/include/asm-mips/dec/kn02ba.h b/include/asm-mips/dec/kn02ba.h deleted file mode 100644 index c957a4f1b32d..000000000000 --- a/include/asm-mips/dec/kn02ba.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * include/asm-mips/dec/kn02ba.h - * - * DECstation 5000/1xx (3min or KN02-BA) definitions. - * - * Copyright (C) 2002, 2003 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_MIPS_DEC_KN02BA_H -#define __ASM_MIPS_DEC_KN02BA_H - -#include /* For common definitions. */ - -/* - * CPU interrupt bits. - */ -#define KN02BA_CPU_INR_HALT 6 /* HALT button */ -#define KN02BA_CPU_INR_CASCADE 5 /* I/O ASIC cascade */ -#define KN02BA_CPU_INR_TC2 4 /* TURBOchannel slot #2 */ -#define KN02BA_CPU_INR_TC1 3 /* TURBOchannel slot #1 */ -#define KN02BA_CPU_INR_TC0 2 /* TURBOchannel slot #0 */ - -/* - * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits. - */ -#define KN02BA_IO_INR_RES_15 15 /* unused */ -#define KN02BA_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */ -#define KN02BA_IO_INR_RES_13 13 /* unused */ -#define KN02BA_IO_INR_BUS 12 /* memory, I/O bus read/write errors */ -#define KN02BA_IO_INR_RES_11 11 /* unused */ -#define KN02BA_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */ -#define KN02BA_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */ -#define KN02BA_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */ -#define KN02BA_IO_INR_SCC1 7 /* SCC (Z85C30) serial #1 */ -#define KN02BA_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */ -#define KN02BA_IO_INR_RTC 5 /* DS1287 RTC */ -#define KN02BA_IO_INR_PSU 4 /* power supply unit warning */ -#define KN02BA_IO_INR_RES_3 3 /* unused */ -#define KN02BA_IO_INR_ASC_DATA 2 /* SCSI data ready (for PIO) */ -#define KN02BA_IO_INR_PBNC 1 /* ~HALT button debouncer */ -#define KN02BA_IO_INR_PBNO 0 /* HALT button debouncer */ - - -/* - * Memory Error Register bits. - */ -#define KN02BA_MER_RES_27 (1<<27) /* unused */ - -/* - * Memory Size Register bits. - */ -#define KN02BA_MSR_RES_17 (0x3ff<<17) /* unused */ - -/* - * I/O ASIC System Support Register bits. - */ -#define KN02BA_IO_SSR_TXDIS1 (1<<14) /* SCC1 transmit disable */ -#define KN02BA_IO_SSR_TXDIS0 (1<<13) /* SCC0 transmit disable */ -#define KN02BA_IO_SSR_RES_12 (1<<12) /* unused */ - -#define KN02BA_IO_SSR_LEDS (0xff<<0) /* ~diagnostic LEDs */ - -#endif /* __ASM_MIPS_DEC_KN02BA_H */ diff --git a/include/asm-mips/dec/kn02ca.h b/include/asm-mips/dec/kn02ca.h deleted file mode 100644 index 92c0fe256099..000000000000 --- a/include/asm-mips/dec/kn02ca.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * include/asm-mips/dec/kn02ca.h - * - * Personal DECstation 5000/xx (Maxine or KN02-CA) definitions. - * - * Copyright (C) 2002, 2003 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_MIPS_DEC_KN02CA_H -#define __ASM_MIPS_DEC_KN02CA_H - -#include /* For common definitions. */ - -/* - * CPU interrupt bits. - */ -#define KN02CA_CPU_INR_HALT 6 /* HALT from ACCESS.Bus */ -#define KN02CA_CPU_INR_CASCADE 5 /* I/O ASIC cascade */ -#define KN02CA_CPU_INR_BUS 4 /* memory, I/O bus read/write errors */ -#define KN02CA_CPU_INR_RTC 3 /* DS1287 RTC */ -#define KN02CA_CPU_INR_TIMER 2 /* ARC periodic timer */ - -/* - * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits. - */ -#define KN02CA_IO_INR_FLOPPY 15 /* 82077 FDC */ -#define KN02CA_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */ -#define KN02CA_IO_INR_POWERON 13 /* (*) ACCESS.Bus/power-on reset */ -#define KN02CA_IO_INR_TC0 12 /* TURBOchannel slot #0 */ -#define KN02CA_IO_INR_TIMER 12 /* ARC periodic timer (?) */ -#define KN02CA_IO_INR_ISDN 11 /* Am79C30A ISDN */ -#define KN02CA_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */ -#define KN02CA_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */ -#define KN02CA_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */ -#define KN02CA_IO_INR_HDFLOPPY 7 /* (*) HD (1.44MB) floppy status */ -#define KN02CA_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */ -#define KN02CA_IO_INR_TC1 5 /* TURBOchannel slot #1 */ -#define KN02CA_IO_INR_XDFLOPPY 4 /* (*) XD (2.88MB) floppy status */ -#define KN02CA_IO_INR_VIDEO 3 /* framebuffer */ -#define KN02CA_IO_INR_XVIDEO 2 /* ~framebuffer */ -#define KN02CA_IO_INR_AB_XMIT 1 /* ACCESS.bus transmit */ -#define KN02CA_IO_INR_AB_RECV 0 /* ACCESS.bus receive */ - - -/* - * Memory Error Register bits. - */ -#define KN02CA_MER_INTR (1<<27) /* ARC IRQ status & ack */ - -/* - * Memory Size Register bits. - */ -#define KN02CA_MSR_INTREN (1<<26) /* ARC periodic IRQ enable */ -#define KN02CA_MSR_MS10EN (1<<25) /* 10/1ms IRQ period select */ -#define KN02CA_MSR_PFORCE (0xf<<21) /* byte lane error force */ -#define KN02CA_MSR_MABEN (1<<20) /* A side VFB address enable */ -#define KN02CA_MSR_LASTBANK (0x7<<17) /* onboard RAM bank # */ - -/* - * I/O ASIC System Support Register bits. - */ -#define KN03CA_IO_SSR_RES_14 (1<<14) /* unused */ -#define KN03CA_IO_SSR_RES_13 (1<<13) /* unused */ -#define KN03CA_IO_SSR_ISDN_RST (1<<12) /* ~ISDN (Am79C30A) reset */ - -#define KN03CA_IO_SSR_FLOPPY_RST (1<<7) /* ~FDC (82077) reset */ -#define KN03CA_IO_SSR_VIDEO_RST (1<<6) /* ~framebuffer reset */ -#define KN03CA_IO_SSR_AB_RST (1<<5) /* ACCESS.bus reset */ -#define KN03CA_IO_SSR_RES_4 (1<<4) /* unused */ -#define KN03CA_IO_SSR_RES_3 (1<<4) /* unused */ -#define KN03CA_IO_SSR_RES_2 (1<<2) /* unused */ -#define KN03CA_IO_SSR_RES_1 (1<<1) /* unused */ -#define KN03CA_IO_SSR_LED (1<<0) /* power LED */ - -#endif /* __ASM_MIPS_DEC_KN02CA_H */ diff --git a/include/asm-mips/dec/kn02xa.h b/include/asm-mips/dec/kn02xa.h deleted file mode 100644 index b56b4577f6ef..000000000000 --- a/include/asm-mips/dec/kn02xa.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Hardware info common to DECstation 5000/1xx systems (otherwise - * known as 3min or kn02ba) and Personal DECstations 5000/xx ones - * (otherwise known as maxine or kn02ca). - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions - * are by courtesy of Chris Fraser. - * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki - * - * These are addresses which have to be known early in the boot process. - * For other addresses refer to tc.h, ioasic_addrs.h and friends. - */ -#ifndef __ASM_MIPS_DEC_KN02XA_H -#define __ASM_MIPS_DEC_KN02XA_H - -#include - -#define KN02XA_SLOT_BASE 0x1c000000 - -/* - * Memory control ASIC registers. - */ -#define KN02XA_MER 0x0c400000 /* memory error register */ -#define KN02XA_MSR 0x0c800000 /* memory size register */ - -/* - * CPU control ASIC registers. - */ -#define KN02XA_MEM_CONF 0x0e000000 /* write timeout config */ -#define KN02XA_EAR 0x0e000004 /* error address register */ -#define KN02XA_BOOT0 0x0e000008 /* boot 0 register */ -#define KN02XA_MEM_INTR 0x0e00000c /* write err IRQ stat & ack */ - -/* - * Memory Error Register bits, common definitions. - * The rest is defined in system-specific headers. - */ -#define KN02XA_MER_RES_28 (0xf<<28) /* unused */ -#define KN02XA_MER_RES_17 (0x3ff<<17) /* unused */ -#define KN02XA_MER_PAGERR (1<<16) /* 2k page boundary error */ -#define KN02XA_MER_TRANSERR (1<<15) /* transfer length error */ -#define KN02XA_MER_PARDIS (1<<14) /* parity error disable */ -#define KN02XA_MER_SIZE (1<<13) /* r/o mirror of MSR_SIZE */ -#define KN02XA_MER_RES_12 (1<<12) /* unused */ -#define KN02XA_MER_BYTERR (0xf<<8) /* byte lane error bitmask: */ -#define KN02XA_MER_BYTERR_3 (0x8<<8) /* byte lane #3 */ -#define KN02XA_MER_BYTERR_2 (0x4<<8) /* byte lane #2 */ -#define KN02XA_MER_BYTERR_1 (0x2<<8) /* byte lane #1 */ -#define KN02XA_MER_BYTERR_0 (0x1<<8) /* byte lane #0 */ -#define KN02XA_MER_RES_0 (0xff<<0) /* unused */ - -/* - * Memory Size Register bits, common definitions. - * The rest is defined in system-specific headers. - */ -#define KN02XA_MSR_RES_27 (0x1f<<27) /* unused */ -#define KN02XA_MSR_RES_14 (0x7<<14) /* unused */ -#define KN02XA_MSR_SIZE (1<<13) /* 16M/4M stride */ -#define KN02XA_MSR_RES_0 (0x1fff<<0) /* unused */ - -/* - * Error Address Register bits. - */ -#define KN02XA_EAR_RES_29 (0x7<<29) /* unused */ -#define KN02XA_EAR_ADDRESS (0x7ffffff<<2) /* address involved */ -#define KN02XA_EAR_RES_0 (0x3<<0) /* unused */ - - -#ifndef __ASSEMBLY__ - -#include - -struct pt_regs; - -extern void dec_kn02xa_be_init(void); -extern int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup); -extern irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id); -#endif - -#endif /* __ASM_MIPS_DEC_KN02XA_H */ diff --git a/include/asm-mips/dec/kn03.h b/include/asm-mips/dec/kn03.h deleted file mode 100644 index edede923ffb8..000000000000 --- a/include/asm-mips/dec/kn03.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Hardware info about DECstation 5000/2x0 systems (otherwise known as - * 3max+) and DECsystem 5900 systems (otherwise known as bigmax) which - * differ mechanically but are otherwise identical (both are known as - * KN03). - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions - * are by courtesy of Chris Fraser. - * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki - */ -#ifndef __ASM_MIPS_DEC_KN03_H -#define __ASM_MIPS_DEC_KN03_H - -#include -#include - -#define KN03_SLOT_BASE 0x1f800000 - -/* - * CPU interrupt bits. - */ -#define KN03_CPU_INR_HALT 6 /* HALT button */ -#define KN03_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */ -#define KN03_CPU_INR_RES_4 4 /* unused */ -#define KN03_CPU_INR_RTC 3 /* DS1287 RTC */ -#define KN03_CPU_INR_CASCADE 2 /* I/O ASIC cascade */ - -/* - * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits. - */ -#define KN03_IO_INR_3MAXP 15 /* (*) 3max+/bigmax ID */ -#define KN03_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */ -#define KN03_IO_INR_TC2 13 /* TURBOchannel slot #2 */ -#define KN03_IO_INR_TC1 12 /* TURBOchannel slot #1 */ -#define KN03_IO_INR_TC0 11 /* TURBOchannel slot #0 */ -#define KN03_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */ -#define KN03_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */ -#define KN03_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */ -#define KN03_IO_INR_SCC1 7 /* SCC (Z85C30) serial #1 */ -#define KN03_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */ -#define KN03_IO_INR_RTC 5 /* DS1287 RTC */ -#define KN03_IO_INR_PSU 4 /* power supply unit warning */ -#define KN03_IO_INR_RES_3 3 /* unused */ -#define KN03_IO_INR_ASC_DATA 2 /* SCSI data ready (for PIO) */ -#define KN03_IO_INR_PBNC 1 /* ~HALT button debouncer */ -#define KN03_IO_INR_PBNO 0 /* HALT button debouncer */ - - -/* - * Memory Control Register bits. - */ -#define KN03_MCR_RES_16 (0xffff<<16) /* unused */ -#define KN03_MCR_DIAGCHK (1<<15) /* diagn/norml ECC reads */ -#define KN03_MCR_DIAGGEN (1<<14) /* diagn/norml ECC writes */ -#define KN03_MCR_CORRECT (1<<13) /* ECC correct/check */ -#define KN03_MCR_RES_11 (0x3<<12) /* unused */ -#define KN03_MCR_BNK32M (1<<10) /* 32M/8M stride */ -#define KN03_MCR_RES_7 (0x7<<7) /* unused */ -#define KN03_MCR_CHECK (0x7f<<0) /* diagnostic check bits */ - -/* - * I/O ASIC System Support Register bits. - */ -#define KN03_IO_SSR_TXDIS1 (1<<14) /* SCC1 transmit disable */ -#define KN03_IO_SSR_TXDIS0 (1<<13) /* SCC0 transmit disable */ -#define KN03_IO_SSR_RES_12 (1<<12) /* unused */ - -#define KN03_IO_SSR_LEDS (0xff<<0) /* ~diagnostic LEDs */ - -#endif /* __ASM_MIPS_DEC_KN03_H */ diff --git a/include/asm-mips/dec/kn05.h b/include/asm-mips/dec/kn05.h deleted file mode 100644 index 56d22dc8803a..000000000000 --- a/include/asm-mips/dec/kn05.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * include/asm-mips/dec/kn05.h - * - * DECstation/DECsystem 5000/260 (4max+ or KN05), 5000/150 (4min - * or KN04-BA), Personal DECstation/DECsystem 5000/50 (4maxine or - * KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC - * definitions. - * - * Copyright (C) 2002, 2003, 2005, 2008 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * WARNING! All this information is pure guesswork based on the - * ROM. It is provided here in hope it will give someone some - * food for thought. No documentation for the KN05 nor the KN04 - * module has been located so far. - */ -#ifndef __ASM_MIPS_DEC_KN05_H -#define __ASM_MIPS_DEC_KN05_H - -#include - -/* - * The oncard MB (Memory Buffer) ASIC provides an additional address - * decoder. Certain address ranges within the "high" 16 slots are - * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA. - * Others are handled locally. "Low" slots are always passed. - */ -#define KN4K_SLOT_BASE 0x1fc00000 - -#define KN4K_MB_ROM (0*IOASIC_SLOT_SIZE) /* KN05/KN04 card ROM */ -#define KN4K_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */ -#define KN4K_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */ -#define KN4K_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */ -#define KN4K_MB_INT (4*IOASIC_SLOT_SIZE) /* MB interrupt register */ -#define KN4K_MB_EA (5*IOASIC_SLOT_SIZE) /* MB error address? */ -#define KN4K_MB_EC (6*IOASIC_SLOT_SIZE) /* MB error ??? */ -#define KN4K_MB_CSR (7*IOASIC_SLOT_SIZE) /* MB control & status */ -#define KN4K_RES_08 (8*IOASIC_SLOT_SIZE) /* unused? */ -#define KN4K_RES_09 (9*IOASIC_SLOT_SIZE) /* unused? */ -#define KN4K_RES_10 (10*IOASIC_SLOT_SIZE) /* unused? */ -#define KN4K_RES_11 (11*IOASIC_SLOT_SIZE) /* unused? */ -#define KN4K_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */ -#define KN4K_RES_13 (13*IOASIC_SLOT_SIZE) /* unused? */ -#define KN4K_RES_14 (14*IOASIC_SLOT_SIZE) /* unused? */ -#define KN4K_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */ - -/* - * Bits for the MB interrupt register. - * The register appears read-only. - */ -#define KN4K_MB_INT_TC (1<<0) /* TURBOchannel? */ -#define KN4K_MB_INT_RTC (1<<1) /* RTC? */ -#define KN4K_MB_INT_MT (1<<3) /* I/O ASIC cascade */ - -/* - * Bits for the MB control & status register. - * Set to 0x00bf8001 for KN05 and to 0x003f8000 for KN04 by the firmware. - */ -#define KN4K_MB_CSR_PF (1<<0) /* PreFetching enable? */ -#define KN4K_MB_CSR_F (1<<1) /* ??? */ -#define KN4K_MB_CSR_ECC (0xff<<2) /* ??? */ -#define KN4K_MB_CSR_OD (1<<10) /* ??? */ -#define KN4K_MB_CSR_CP (1<<11) /* ??? */ -#define KN4K_MB_CSR_UNC (1<<12) /* ??? */ -#define KN4K_MB_CSR_IM (1<<13) /* ??? */ -#define KN4K_MB_CSR_NC (1<<14) /* ??? */ -#define KN4K_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */ -#define KN4K_MB_CSR_MSK (0x1f<<16) /* CPU Int[4:0] mask */ -#define KN4K_MB_CSR_FW (1<<21) /* ??? */ -#define KN4K_MB_CSR_W (1<<31) /* ??? */ - -#endif /* __ASM_MIPS_DEC_KN05_H */ diff --git a/include/asm-mips/dec/kn230.h b/include/asm-mips/dec/kn230.h deleted file mode 100644 index ff1bf17de8d8..000000000000 --- a/include/asm-mips/dec/kn230.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-mips/dec/kn230.h - * - * DECsystem 5100 (MIPSmate or KN230) definitions. - * - * Copyright (C) 2002, 2003 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_MIPS_DEC_KN230_H -#define __ASM_MIPS_DEC_KN230_H - -/* - * CPU interrupt bits. - */ -#define KN230_CPU_INR_HALT 6 /* HALT button */ -#define KN230_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */ -#define KN230_CPU_INR_RTC 4 /* DS1287 RTC */ -#define KN230_CPU_INR_SII 3 /* SII (DC7061) SCSI */ -#define KN230_CPU_INR_LANCE 3 /* LANCE (Am7990) Ethernet */ -#define KN230_CPU_INR_DZ11 2 /* DZ11 (DC7085) serial */ - -#endif /* __ASM_MIPS_DEC_KN230_H */ diff --git a/include/asm-mips/dec/machtype.h b/include/asm-mips/dec/machtype.h deleted file mode 100644 index a6ecdebc430a..000000000000 --- a/include/asm-mips/dec/machtype.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Various machine type macros - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 1998, 2000 Harald Koerfgen - */ - -#ifndef __ASM_DEC_MACHTYPE_H -#define __ASM_DEC_MACHTYPE_H - -#include - -#define TURBOCHANNEL (mips_machtype == MACH_DS5000_200 || \ - mips_machtype == MACH_DS5000_1XX || \ - mips_machtype == MACH_DS5000_XX || \ - mips_machtype == MACH_DS5000_2X0 || \ - mips_machtype == MACH_DS5900) - -#define IOASIC (mips_machtype == MACH_DS5000_1XX || \ - mips_machtype == MACH_DS5000_XX || \ - mips_machtype == MACH_DS5000_2X0 || \ - mips_machtype == MACH_DS5900) - -#endif diff --git a/include/asm-mips/dec/prom.h b/include/asm-mips/dec/prom.h deleted file mode 100644 index b9c8203688d5..000000000000 --- a/include/asm-mips/dec/prom.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - * include/asm-mips/dec/prom.h - * - * DECstation PROM interface. - * - * Copyright (C) 2002 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Based on arch/mips/dec/prom/prom.h by the Anonymous. - */ -#ifndef _ASM_DEC_PROM_H -#define _ASM_DEC_PROM_H - -#include - -#include - -/* - * PMAX/3MAX PROM entry points for DS2100/3100's and DS5000/2xx's. - * Many of these will work for MIPSen as well! - */ -#define VEC_RESET (u64 *)CKSEG1ADDR(0x1fc00000) - /* Prom base address */ - -#define PMAX_PROM_ENTRY(x) (VEC_RESET + (x)) /* Prom jump table */ - -#define PMAX_PROM_HALT PMAX_PROM_ENTRY(2) /* valid on MIPSen */ -#define PMAX_PROM_AUTOBOOT PMAX_PROM_ENTRY(5) /* valid on MIPSen */ -#define PMAX_PROM_OPEN PMAX_PROM_ENTRY(6) -#define PMAX_PROM_READ PMAX_PROM_ENTRY(7) -#define PMAX_PROM_CLOSE PMAX_PROM_ENTRY(10) -#define PMAX_PROM_LSEEK PMAX_PROM_ENTRY(11) -#define PMAX_PROM_GETCHAR PMAX_PROM_ENTRY(12) -#define PMAX_PROM_PUTCHAR PMAX_PROM_ENTRY(13) /* 12 on MIPSen */ -#define PMAX_PROM_GETS PMAX_PROM_ENTRY(15) -#define PMAX_PROM_PRINTF PMAX_PROM_ENTRY(17) -#define PMAX_PROM_GETENV PMAX_PROM_ENTRY(33) /* valid on MIPSen */ - - -/* - * Magic number indicating REX PROM available on DECstation. Found in - * register a2 on transfer of control to program from PROM. - */ -#define REX_PROM_MAGIC 0x30464354 - -#ifdef CONFIG_64BIT - -#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */ - -#else /* !CONFIG_64BIT */ - -#define prom_is_rex(magic) ((magic) == REX_PROM_MAGIC) - -#endif /* !CONFIG_64BIT */ - - -/* - * 3MIN/MAXINE PROM entry points for DS5000/1xx's, DS5000/xx's and - * DS5000/2x0. - */ -#define REX_PROM_GETBITMAP 0x84/4 /* get mem bitmap */ -#define REX_PROM_GETCHAR 0x24/4 /* getch() */ -#define REX_PROM_GETENV 0x64/4 /* get env. variable */ -#define REX_PROM_GETSYSID 0x80/4 /* get system id */ -#define REX_PROM_GETTCINFO 0xa4/4 -#define REX_PROM_PRINTF 0x30/4 /* printf() */ -#define REX_PROM_SLOTADDR 0x6c/4 /* slotaddr */ -#define REX_PROM_BOOTINIT 0x54/4 /* open() */ -#define REX_PROM_BOOTREAD 0x58/4 /* read() */ -#define REX_PROM_CLEARCACHE 0x7c/4 - - -/* - * Used by rex_getbitmap(). - */ -typedef struct { - int pagesize; - unsigned char bitmap[0]; -} memmap; - - -/* - * Function pointers as read from a PROM's callback vector. - */ -extern int (*__rex_bootinit)(void); -extern int (*__rex_bootread)(void); -extern int (*__rex_getbitmap)(memmap *); -extern unsigned long *(*__rex_slot_address)(int); -extern void *(*__rex_gettcinfo)(void); -extern int (*__rex_getsysid)(void); -extern void (*__rex_clear_cache)(void); - -extern int (*__prom_getchar)(void); -extern char *(*__prom_getenv)(char *); -extern int (*__prom_printf)(char *, ...); - -extern int (*__pmax_open)(char*, int); -extern int (*__pmax_lseek)(int, long, int); -extern int (*__pmax_read)(int, void *, int); -extern int (*__pmax_close)(int); - - -#ifdef CONFIG_64BIT - -/* - * On MIPS64 we have to call PROM functions via a helper - * dispatcher to accomodate ABI incompatibilities. - */ -#define __DEC_PROM_O32(fun, arg) fun arg __asm__(#fun); \ - __asm__(#fun " = call_o32") - -int __DEC_PROM_O32(_rex_bootinit, (int (*)(void))); -int __DEC_PROM_O32(_rex_bootread, (int (*)(void))); -int __DEC_PROM_O32(_rex_getbitmap, (int (*)(memmap *), memmap *)); -unsigned long *__DEC_PROM_O32(_rex_slot_address, - (unsigned long *(*)(int), int)); -void *__DEC_PROM_O32(_rex_gettcinfo, (void *(*)(void))); -int __DEC_PROM_O32(_rex_getsysid, (int (*)(void))); -void __DEC_PROM_O32(_rex_clear_cache, (void (*)(void))); - -int __DEC_PROM_O32(_prom_getchar, (int (*)(void))); -char *__DEC_PROM_O32(_prom_getenv, (char *(*)(char *), char *)); -int __DEC_PROM_O32(_prom_printf, (int (*)(char *, ...), char *, ...)); - - -#define rex_bootinit() _rex_bootinit(__rex_bootinit) -#define rex_bootread() _rex_bootread(__rex_bootread) -#define rex_getbitmap(x) _rex_getbitmap(__rex_getbitmap, x) -#define rex_slot_address(x) _rex_slot_address(__rex_slot_address, x) -#define rex_gettcinfo() _rex_gettcinfo(__rex_gettcinfo) -#define rex_getsysid() _rex_getsysid(__rex_getsysid) -#define rex_clear_cache() _rex_clear_cache(__rex_clear_cache) - -#define prom_getchar() _prom_getchar(__prom_getchar) -#define prom_getenv(x) _prom_getenv(__prom_getenv, x) -#define prom_printf(x...) _prom_printf(__prom_printf, x) - -#else /* !CONFIG_64BIT */ - -/* - * On plain MIPS we just call PROM functions directly. - */ -#define rex_bootinit __rex_bootinit -#define rex_bootread __rex_bootread -#define rex_getbitmap __rex_getbitmap -#define rex_slot_address __rex_slot_address -#define rex_gettcinfo __rex_gettcinfo -#define rex_getsysid __rex_getsysid -#define rex_clear_cache __rex_clear_cache - -#define prom_getchar __prom_getchar -#define prom_getenv __prom_getenv -#define prom_printf __prom_printf - -#define pmax_open __pmax_open -#define pmax_lseek __pmax_lseek -#define pmax_read __pmax_read -#define pmax_close __pmax_close - -#endif /* !CONFIG_64BIT */ - - -extern void prom_meminit(u32); -extern void prom_identify_arch(u32); -extern void prom_init_cmdline(s32, s32 *, u32); - -extern void register_prom_console(void); -extern void unregister_prom_console(void); - -#endif /* _ASM_DEC_PROM_H */ diff --git a/include/asm-mips/dec/system.h b/include/asm-mips/dec/system.h deleted file mode 100644 index b2afaccd6831..000000000000 --- a/include/asm-mips/dec/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-mips/dec/system.h - * - * Generic DECstation/DECsystem bits. - * - * Copyright (C) 2005, 2006 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_DEC_SYSTEM_H -#define __ASM_DEC_SYSTEM_H - -extern unsigned long dec_kn_slot_base, dec_kn_slot_size; -extern int dec_tc_bus; - -#endif /* __ASM_DEC_SYSTEM_H */ diff --git a/include/asm-mips/delay.h b/include/asm-mips/delay.h deleted file mode 100644 index b0bccd2c4ed5..000000000000 --- a/include/asm-mips/delay.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 by Waldorf Electronics - * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - * Copyright (C) 2007 Maciej W. Rozycki - */ -#ifndef _ASM_DELAY_H -#define _ASM_DELAY_H - -#include -#include - -#include -#include - -static inline void __delay(unsigned long loops) -{ - if (sizeof(long) == 4) - __asm__ __volatile__ ( - " .set noreorder \n" - " .align 3 \n" - "1: bnez %0, 1b \n" - " subu %0, 1 \n" - " .set reorder \n" - : "=r" (loops) - : "0" (loops)); - else if (sizeof(long) == 8 && !DADDI_WAR) - __asm__ __volatile__ ( - " .set noreorder \n" - " .align 3 \n" - "1: bnez %0, 1b \n" - " dsubu %0, 1 \n" - " .set reorder \n" - : "=r" (loops) - : "0" (loops)); - else if (sizeof(long) == 8 && DADDI_WAR) - __asm__ __volatile__ ( - " .set noreorder \n" - " .align 3 \n" - "1: bnez %0, 1b \n" - " dsubu %0, %2 \n" - " .set reorder \n" - : "=r" (loops) - : "0" (loops), "r" (1)); -} - - -/* - * Division by multiplication: you don't have to worry about - * loss of precision. - * - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ - -static inline void __udelay(unsigned long usecs, unsigned long lpj) -{ - unsigned long hi, lo; - - /* - * The rates of 128 is rounded wrongly by the catchall case - * for 64-bit. Excessive precission? Probably ... - */ -#if defined(CONFIG_64BIT) && (HZ == 128) - usecs *= 0x0008637bd05af6c7UL; /* 2**64 / (1000000 / HZ) */ -#elif defined(CONFIG_64BIT) - usecs *= (0x8000000000000000UL / (500000 / HZ)); -#else /* 32-bit junk follows here */ - usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) + - 0x80000000ULL) >> 32); -#endif - - if (sizeof(long) == 4) - __asm__("multu\t%2, %3" - : "=h" (usecs), "=l" (lo) - : "r" (usecs), "r" (lpj) - : GCC_REG_ACCUM); - else if (sizeof(long) == 8 && !R4000_WAR) - __asm__("dmultu\t%2, %3" - : "=h" (usecs), "=l" (lo) - : "r" (usecs), "r" (lpj) - : GCC_REG_ACCUM); - else if (sizeof(long) == 8 && R4000_WAR) - __asm__("dmultu\t%3, %4\n\tmfhi\t%0" - : "=r" (usecs), "=h" (hi), "=l" (lo) - : "r" (usecs), "r" (lpj) - : GCC_REG_ACCUM); - - __delay(usecs); -} - -#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val - -#define udelay(usecs) __udelay((usecs), __udelay_val) - -/* make sure "usecs *= ..." in udelay do not overflow. */ -#if HZ >= 1000 -#define MAX_UDELAY_MS 1 -#elif HZ <= 200 -#define MAX_UDELAY_MS 5 -#else -#define MAX_UDELAY_MS (1000 / HZ) -#endif - -#endif /* _ASM_DELAY_H */ diff --git a/include/asm-mips/device.h b/include/asm-mips/device.h deleted file mode 100644 index d8f9872b0e2d..000000000000 --- a/include/asm-mips/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/include/asm-mips/div64.h b/include/asm-mips/div64.h deleted file mode 100644 index d1d699105c11..000000000000 --- a/include/asm-mips/div64.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Copyright (C) 2000, 2004 Maciej W. Rozycki - * Copyright (C) 2003, 07 Ralf Baechle (ralf@linux-mips.org) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef _ASM_DIV64_H -#define _ASM_DIV64_H - -#include - -#if (_MIPS_SZLONG == 32) - -#include - -/* - * No traps on overflows for any of these... - */ - -#define do_div64_32(res, high, low, base) ({ \ - unsigned long __quot32, __mod32; \ - unsigned long __cf, __tmp, __tmp2, __i; \ - \ - __asm__(".set push\n\t" \ - ".set noat\n\t" \ - ".set noreorder\n\t" \ - "move %2, $0\n\t" \ - "move %3, $0\n\t" \ - "b 1f\n\t" \ - " li %4, 0x21\n" \ - "0:\n\t" \ - "sll $1, %0, 0x1\n\t" \ - "srl %3, %0, 0x1f\n\t" \ - "or %0, $1, %5\n\t" \ - "sll %1, %1, 0x1\n\t" \ - "sll %2, %2, 0x1\n" \ - "1:\n\t" \ - "bnez %3, 2f\n\t" \ - " sltu %5, %0, %z6\n\t" \ - "bnez %5, 3f\n" \ - "2:\n\t" \ - " addiu %4, %4, -1\n\t" \ - "subu %0, %0, %z6\n\t" \ - "addiu %2, %2, 1\n" \ - "3:\n\t" \ - "bnez %4, 0b\n\t" \ - " srl %5, %1, 0x1f\n\t" \ - ".set pop" \ - : "=&r" (__mod32), "=&r" (__tmp), \ - "=&r" (__quot32), "=&r" (__cf), \ - "=&r" (__i), "=&r" (__tmp2) \ - : "Jr" (base), "0" (high), "1" (low)); \ - \ - (res) = __quot32; \ - __mod32; }) - -#define do_div(n, base) ({ \ - unsigned long long __quot; \ - unsigned long __mod; \ - unsigned long long __div; \ - unsigned long __upper, __low, __high, __base; \ - \ - __div = (n); \ - __base = (base); \ - \ - __high = __div >> 32; \ - __low = __div; \ - __upper = __high; \ - \ - if (__high) \ - __asm__("divu $0, %z2, %z3" \ - : "=h" (__upper), "=l" (__high) \ - : "Jr" (__high), "Jr" (__base) \ - : GCC_REG_ACCUM); \ - \ - __mod = do_div64_32(__low, __upper, __low, __base); \ - \ - __quot = __high; \ - __quot = __quot << 32 | __low; \ - (n) = __quot; \ - __mod; }) - -#endif /* (_MIPS_SZLONG == 32) */ - -#if (_MIPS_SZLONG == 64) - -/* - * Hey, we're already 64-bit, no - * need to play games.. - */ -#define do_div(n, base) ({ \ - unsigned long __quot; \ - unsigned int __mod; \ - unsigned long __div; \ - unsigned int __base; \ - \ - __div = (n); \ - __base = (base); \ - \ - __mod = __div % __base; \ - __quot = __div / __base; \ - \ - (n) = __quot; \ - __mod; }) - -#endif /* (_MIPS_SZLONG == 64) */ - -#endif /* _ASM_DIV64_H */ diff --git a/include/asm-mips/dma-mapping.h b/include/asm-mips/dma-mapping.h deleted file mode 100644 index c64afb40cd06..000000000000 --- a/include/asm-mips/dma-mapping.h +++ /dev/null @@ -1,81 +0,0 @@ -#ifndef _ASM_DMA_MAPPING_H -#define _ASM_DMA_MAPPING_H - -#include -#include - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - -void dma_free_noncoherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - -extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction); -extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction); -extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction); -extern dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction); -extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction direction); -extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction direction); -extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction); -extern void dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, enum dma_data_direction direction); -extern void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction); -extern void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction); -extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction direction); -extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction direction); -extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr); -extern int dma_supported(struct device *dev, u64 mask); - -static inline int -dma_set_mask(struct device *dev, u64 mask) -{ - if(!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = mask; - - return 0; -} - -static inline int -dma_get_cache_alignment(void) -{ - /* XXX Largest on any MIPS */ - return 128; -} - -extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr); - -extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction); - -#if 0 -#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY - -extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, - dma_addr_t device_addr, size_t size, int flags); -extern void dma_release_declared_memory(struct device *dev); -extern void * dma_mark_declared_memory_occupied(struct device *dev, - dma_addr_t device_addr, size_t size); -#endif - -#endif /* _ASM_DMA_MAPPING_H */ diff --git a/include/asm-mips/dma.h b/include/asm-mips/dma.h deleted file mode 100644 index 1353c81065d1..000000000000 --- a/include/asm-mips/dma.h +++ /dev/null @@ -1,315 +0,0 @@ -/* - * linux/include/asm/dma.h: Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - * - * NOTE: all this is true *only* for ISA/EISA expansions on Mips boards - * and can only be used for expansion cards. Onboard DMA controllers, such - * as the R4030 on Jazz boards behave totally different! - */ - -#ifndef _ASM_DMA_H -#define _ASM_DMA_H - -#include /* need byte IO */ -#include /* And spinlocks */ -#include -#include - - -#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER -#define dma_outb outb_p -#else -#define dma_outb outb -#endif - -#define dma_inb inb - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * DMA transfers are limited to the lower 16MB of _physical_ memory. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -#ifndef CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN -#define MAX_DMA_CHANNELS 8 -#endif - -/* - * The maximum address in KSEG0 that we can perform a DMA transfer to on this - * platform. This describes only the PC style part of the DMA logic like on - * Deskstations or Acer PICA but not the much more versatile DMA logic used - * for the local devices on Acer PICA or Magnums. - */ -#if defined(CONFIG_SGI_IP22) || defined(CONFIG_SGI_IP28) -/* don't care; ISA bus master won't work, ISA slave DMA supports 32bit addr */ -#define MAX_DMA_ADDRESS PAGE_OFFSET -#else -#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x01000000) -#endif -#define MAX_DMA_PFN PFN_DOWN(virt_to_phys((void *)MAX_DMA_ADDRESS)) -#define MAX_DMA32_PFN (1UL << (32 - PAGE_SHIFT)) - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG 0x08 /* command register (w) */ -#define DMA1_STAT_REG 0x08 /* status register (r) */ -#define DMA1_REQ_REG 0x09 /* request register (w) */ -#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ -#define DMA1_MODE_REG 0x0B /* mode register (w) */ -#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ -#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ -#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ - -#define DMA2_CMD_REG 0xD0 /* command register (w) */ -#define DMA2_STAT_REG 0xD0 /* status register (r) */ -#define DMA2_REQ_REG 0xD2 /* request register (w) */ -#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ -#define DMA2_MODE_REG 0xD6 /* mode register (w) */ -#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ -#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ -#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ - -#define DMA_ADDR_0 0x00 /* DMA address registers */ -#define DMA_ADDR_1 0x02 -#define DMA_ADDR_2 0x04 -#define DMA_ADDR_3 0x06 -#define DMA_ADDR_4 0xC0 -#define DMA_ADDR_5 0xC4 -#define DMA_ADDR_6 0xC8 -#define DMA_ADDR_7 0xCC - -#define DMA_CNT_0 0x01 /* DMA count registers */ -#define DMA_CNT_1 0x03 -#define DMA_CNT_2 0x05 -#define DMA_CNT_3 0x07 -#define DMA_CNT_4 0xC2 -#define DMA_CNT_5 0xC6 -#define DMA_CNT_6 0xCA -#define DMA_CNT_7 0xCE - -#define DMA_PAGE_0 0x87 /* DMA page registers */ -#define DMA_PAGE_1 0x83 -#define DMA_PAGE_2 0x81 -#define DMA_PAGE_3 0x82 -#define DMA_PAGE_5 0x8B -#define DMA_PAGE_6 0x89 -#define DMA_PAGE_7 0x8A - -#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ -#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr, DMA1_MASK_REG); - else - dma_outb(dmanr & 3, DMA2_MASK_REG); -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr<=3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr&3), DMA2_MODE_REG); -} - -/* Set only the page register bits of the transfer address. - * This is used for successive transfers when we know the contents of - * the lower 16 bits of the DMA current address register, but a 64k boundary - * may have been crossed. - */ -static __inline__ void set_dma_page(unsigned int dmanr, char pagenr) -{ - switch(dmanr) { - case 0: - dma_outb(pagenr, DMA_PAGE_0); - break; - case 1: - dma_outb(pagenr, DMA_PAGE_1); - break; - case 2: - dma_outb(pagenr, DMA_PAGE_2); - break; - case 3: - dma_outb(pagenr, DMA_PAGE_3); - break; - case 5: - dma_outb(pagenr & 0xfe, DMA_PAGE_5); - break; - case 6: - dma_outb(pagenr & 0xfe, DMA_PAGE_6); - break; - case 7: - dma_outb(pagenr & 0xfe, DMA_PAGE_7); - break; - } -} - - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - set_dma_page(dmanr, a>>16); - if (dmanr <= 3) { - dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - } else { - dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - } -} - - -/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - } else { - dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - } -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE - : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - - return (dmanr<=3)? count : (count<<1); -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -/* From PCI */ - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ASM_DMA_H */ diff --git a/include/asm-mips/ds1286.h b/include/asm-mips/ds1286.h deleted file mode 100644 index 6983b6ff0af3..000000000000 --- a/include/asm-mips/ds1286.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Machine dependent access functions for RTC registers. - * - * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef _ASM_DS1286_H -#define _ASM_DS1286_H - -#include - -#endif /* _ASM_DS1286_H */ diff --git a/include/asm-mips/ds1287.h b/include/asm-mips/ds1287.h deleted file mode 100644 index ba1702e86931..000000000000 --- a/include/asm-mips/ds1287.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * DS1287 timer functions. - * - * Copyright (C) 2008 Yoichi Yuasa - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - */ -#ifndef __ASM_DS1287_H -#define __ASM_DS1287_H - -extern int ds1287_timer_state(void); -extern void ds1287_set_base_clock(unsigned int clock); -extern int ds1287_clockevent_init(int irq); - -#endif diff --git a/include/asm-mips/dsp.h b/include/asm-mips/dsp.h deleted file mode 100644 index e9bfc0813c72..000000000000 --- a/include/asm-mips/dsp.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (C) 2005 Mips Technologies - * Author: Chris Dearman, chris@mips.com derived from fpu.h - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_DSP_H -#define _ASM_DSP_H - -#include -#include -#include -#include - -#define DSP_DEFAULT 0x00000000 -#define DSP_MASK 0x3ff - -#define __enable_dsp_hazard() \ -do { \ - asm("_ehb"); \ -} while (0) - -static inline void __init_dsp(void) -{ - mthi1(0); - mtlo1(0); - mthi2(0); - mtlo2(0); - mthi3(0); - mtlo3(0); - wrdsp(DSP_DEFAULT, DSP_MASK); -} - -static inline void init_dsp(void) -{ - if (cpu_has_dsp) - __init_dsp(); -} - -#define __save_dsp(tsk) \ -do { \ - tsk->thread.dsp.dspr[0] = mfhi1(); \ - tsk->thread.dsp.dspr[1] = mflo1(); \ - tsk->thread.dsp.dspr[2] = mfhi2(); \ - tsk->thread.dsp.dspr[3] = mflo2(); \ - tsk->thread.dsp.dspr[4] = mfhi3(); \ - tsk->thread.dsp.dspr[5] = mflo3(); \ - tsk->thread.dsp.dspcontrol = rddsp(DSP_MASK); \ -} while (0) - -#define save_dsp(tsk) \ -do { \ - if (cpu_has_dsp) \ - __save_dsp(tsk); \ -} while (0) - -#define __restore_dsp(tsk) \ -do { \ - mthi1(tsk->thread.dsp.dspr[0]); \ - mtlo1(tsk->thread.dsp.dspr[1]); \ - mthi2(tsk->thread.dsp.dspr[2]); \ - mtlo2(tsk->thread.dsp.dspr[3]); \ - mthi3(tsk->thread.dsp.dspr[4]); \ - mtlo3(tsk->thread.dsp.dspr[5]); \ - wrdsp(tsk->thread.dsp.dspcontrol, DSP_MASK); \ -} while (0) - -#define restore_dsp(tsk) \ -do { \ - if (cpu_has_dsp) \ - __restore_dsp(tsk); \ -} while (0) - -#define __get_dsp_regs(tsk) \ -({ \ - if (tsk == current) \ - __save_dsp(current); \ - \ - tsk->thread.dsp.dspr; \ -}) - -#endif /* _ASM_DSP_H */ diff --git a/include/asm-mips/edac.h b/include/asm-mips/edac.h deleted file mode 100644 index 4da0c1fe30d9..000000000000 --- a/include/asm-mips/edac.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef ASM_EDAC_H -#define ASM_EDAC_H - -/* ECC atomic, DMA, SMP and interrupt safe scrub function */ - -static inline void atomic_scrub(void *va, u32 size) -{ - unsigned long *virt_addr = va; - unsigned long temp; - u32 i; - - for (i = 0; i < size / sizeof(unsigned long); i++) { - /* - * Very carefully read and write to memory atomically - * so we are interrupt, DMA and SMP safe. - * - * Intel: asm("lock; addl $0, %0"::"m"(*virt_addr)); - */ - - __asm__ __volatile__ ( - " .set mips2 \n" - "1: ll %0, %1 # atomic_scrub \n" - " addu %0, $0 \n" - " sc %0, %1 \n" - " beqz %0, 1b \n" - " .set mips0 \n" - : "=&r" (temp), "=m" (*virt_addr) - : "m" (*virt_addr)); - - virt_addr++; - } -} - -#endif diff --git a/include/asm-mips/elf.h b/include/asm-mips/elf.h deleted file mode 100644 index f69f7acba637..000000000000 --- a/include/asm-mips/elf.h +++ /dev/null @@ -1,371 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Much of this is taken from binutils and GNU libc ... - */ -#ifndef _ASM_ELF_H -#define _ASM_ELF_H - - -/* ELF header e_flags defines. */ -/* MIPS architecture level. */ -#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */ -#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */ -#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */ -#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */ -#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */ -#define EF_MIPS_ARCH_32 0x50000000 /* MIPS32 code. */ -#define EF_MIPS_ARCH_64 0x60000000 /* MIPS64 code. */ -#define EF_MIPS_ARCH_32R2 0x70000000 /* MIPS32 R2 code. */ -#define EF_MIPS_ARCH_64R2 0x80000000 /* MIPS64 R2 code. */ - -/* The ABI of a file. */ -#define EF_MIPS_ABI_O32 0x00001000 /* O32 ABI. */ -#define EF_MIPS_ABI_O64 0x00002000 /* O32 extended for 64 bit. */ - -#define PT_MIPS_REGINFO 0x70000000 -#define PT_MIPS_RTPROC 0x70000001 -#define PT_MIPS_OPTIONS 0x70000002 - -/* Flags in the e_flags field of the header */ -#define EF_MIPS_NOREORDER 0x00000001 -#define EF_MIPS_PIC 0x00000002 -#define EF_MIPS_CPIC 0x00000004 -#define EF_MIPS_ABI2 0x00000020 -#define EF_MIPS_OPTIONS_FIRST 0x00000080 -#define EF_MIPS_32BITMODE 0x00000100 -#define EF_MIPS_ABI 0x0000f000 -#define EF_MIPS_ARCH 0xf0000000 - -#define DT_MIPS_RLD_VERSION 0x70000001 -#define DT_MIPS_TIME_STAMP 0x70000002 -#define DT_MIPS_ICHECKSUM 0x70000003 -#define DT_MIPS_IVERSION 0x70000004 -#define DT_MIPS_FLAGS 0x70000005 - #define RHF_NONE 0x00000000 - #define RHF_HARDWAY 0x00000001 - #define RHF_NOTPOT 0x00000002 - #define RHF_SGI_ONLY 0x00000010 -#define DT_MIPS_BASE_ADDRESS 0x70000006 -#define DT_MIPS_CONFLICT 0x70000008 -#define DT_MIPS_LIBLIST 0x70000009 -#define DT_MIPS_LOCAL_GOTNO 0x7000000a -#define DT_MIPS_CONFLICTNO 0x7000000b -#define DT_MIPS_LIBLISTNO 0x70000010 -#define DT_MIPS_SYMTABNO 0x70000011 -#define DT_MIPS_UNREFEXTNO 0x70000012 -#define DT_MIPS_GOTSYM 0x70000013 -#define DT_MIPS_HIPAGENO 0x70000014 -#define DT_MIPS_RLD_MAP 0x70000016 - -#define R_MIPS_NONE 0 -#define R_MIPS_16 1 -#define R_MIPS_32 2 -#define R_MIPS_REL32 3 -#define R_MIPS_26 4 -#define R_MIPS_HI16 5 -#define R_MIPS_LO16 6 -#define R_MIPS_GPREL16 7 -#define R_MIPS_LITERAL 8 -#define R_MIPS_GOT16 9 -#define R_MIPS_PC16 10 -#define R_MIPS_CALL16 11 -#define R_MIPS_GPREL32 12 -/* The remaining relocs are defined on Irix, although they are not - in the MIPS ELF ABI. */ -#define R_MIPS_UNUSED1 13 -#define R_MIPS_UNUSED2 14 -#define R_MIPS_UNUSED3 15 -#define R_MIPS_SHIFT5 16 -#define R_MIPS_SHIFT6 17 -#define R_MIPS_64 18 -#define R_MIPS_GOT_DISP 19 -#define R_MIPS_GOT_PAGE 20 -#define R_MIPS_GOT_OFST 21 -/* - * The following two relocation types are specified in the MIPS ABI - * conformance guide version 1.2 but not yet in the psABI. - */ -#define R_MIPS_GOTHI16 22 -#define R_MIPS_GOTLO16 23 -#define R_MIPS_SUB 24 -#define R_MIPS_INSERT_A 25 -#define R_MIPS_INSERT_B 26 -#define R_MIPS_DELETE 27 -#define R_MIPS_HIGHER 28 -#define R_MIPS_HIGHEST 29 -/* - * The following two relocation types are specified in the MIPS ABI - * conformance guide version 1.2 but not yet in the psABI. - */ -#define R_MIPS_CALLHI16 30 -#define R_MIPS_CALLLO16 31 -/* - * This range is reserved for vendor specific relocations. - */ -#define R_MIPS_LOVENDOR 100 -#define R_MIPS_HIVENDOR 127 - -#define SHN_MIPS_ACCOMON 0xff00 /* Allocated common symbols */ -#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */ -#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */ -#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */ -#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */ - -#define SHT_MIPS_LIST 0x70000000 -#define SHT_MIPS_CONFLICT 0x70000002 -#define SHT_MIPS_GPTAB 0x70000003 -#define SHT_MIPS_UCODE 0x70000004 -#define SHT_MIPS_DEBUG 0x70000005 -#define SHT_MIPS_REGINFO 0x70000006 -#define SHT_MIPS_PACKAGE 0x70000007 -#define SHT_MIPS_PACKSYM 0x70000008 -#define SHT_MIPS_RELD 0x70000009 -#define SHT_MIPS_IFACE 0x7000000b -#define SHT_MIPS_CONTENT 0x7000000c -#define SHT_MIPS_OPTIONS 0x7000000d -#define SHT_MIPS_SHDR 0x70000010 -#define SHT_MIPS_FDESC 0x70000011 -#define SHT_MIPS_EXTSYM 0x70000012 -#define SHT_MIPS_DENSE 0x70000013 -#define SHT_MIPS_PDESC 0x70000014 -#define SHT_MIPS_LOCSYM 0x70000015 -#define SHT_MIPS_AUXSYM 0x70000016 -#define SHT_MIPS_OPTSYM 0x70000017 -#define SHT_MIPS_LOCSTR 0x70000018 -#define SHT_MIPS_LINE 0x70000019 -#define SHT_MIPS_RFDESC 0x7000001a -#define SHT_MIPS_DELTASYM 0x7000001b -#define SHT_MIPS_DELTAINST 0x7000001c -#define SHT_MIPS_DELTACLASS 0x7000001d -#define SHT_MIPS_DWARF 0x7000001e -#define SHT_MIPS_DELTADECL 0x7000001f -#define SHT_MIPS_SYMBOL_LIB 0x70000020 -#define SHT_MIPS_EVENTS 0x70000021 -#define SHT_MIPS_TRANSLATE 0x70000022 -#define SHT_MIPS_PIXIE 0x70000023 -#define SHT_MIPS_XLATE 0x70000024 -#define SHT_MIPS_XLATE_DEBUG 0x70000025 -#define SHT_MIPS_WHIRL 0x70000026 -#define SHT_MIPS_EH_REGION 0x70000027 -#define SHT_MIPS_XLATE_OLD 0x70000028 -#define SHT_MIPS_PDR_EXCEPTION 0x70000029 - -#define SHF_MIPS_GPREL 0x10000000 -#define SHF_MIPS_MERGE 0x20000000 -#define SHF_MIPS_ADDR 0x40000000 -#define SHF_MIPS_STRING 0x80000000 -#define SHF_MIPS_NOSTRIP 0x08000000 -#define SHF_MIPS_LOCAL 0x04000000 -#define SHF_MIPS_NAMES 0x02000000 -#define SHF_MIPS_NODUPES 0x01000000 - -#ifndef ELF_ARCH -/* ELF register definitions */ -#define ELF_NGREG 45 -#define ELF_NFPREG 33 - -typedef unsigned long elf_greg_t; -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef double elf_fpreg_t; -typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; - -#ifdef CONFIG_32BIT - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(hdr) \ -({ \ - int __res = 1; \ - struct elfhdr *__h = (hdr); \ - \ - if (__h->e_machine != EM_MIPS) \ - __res = 0; \ - if (__h->e_ident[EI_CLASS] != ELFCLASS32) \ - __res = 0; \ - if ((__h->e_flags & EF_MIPS_ABI2) != 0) \ - __res = 0; \ - if (((__h->e_flags & EF_MIPS_ABI) != 0) && \ - ((__h->e_flags & EF_MIPS_ABI) != EF_MIPS_ABI_O32)) \ - __res = 0; \ - \ - __res; \ -}) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 - -#endif /* CONFIG_32BIT */ - -#ifdef CONFIG_64BIT -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(hdr) \ -({ \ - int __res = 1; \ - struct elfhdr *__h = (hdr); \ - \ - if (__h->e_machine != EM_MIPS) \ - __res = 0; \ - if (__h->e_ident[EI_CLASS] != ELFCLASS64) \ - __res = 0; \ - \ - __res; \ -}) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS64 - -#endif /* CONFIG_64BIT */ - -/* - * These are used to set parameters in the core dumps. - */ -#ifdef __MIPSEB__ -#define ELF_DATA ELFDATA2MSB -#elif __MIPSEL__ -#define ELF_DATA ELFDATA2LSB -#endif -#define ELF_ARCH EM_MIPS - -#endif /* !defined(ELF_ARCH) */ - -struct mips_abi; - -extern struct mips_abi mips_abi; -extern struct mips_abi mips_abi_32; -extern struct mips_abi mips_abi_n32; - -#ifdef CONFIG_32BIT - -#define SET_PERSONALITY(ex, ibcs2) \ -do { \ - if (ibcs2) \ - set_personality(PER_SVR4); \ - set_personality(PER_LINUX); \ - \ - current->thread.abi = &mips_abi; \ -} while (0) - -#endif /* CONFIG_32BIT */ - -#ifdef CONFIG_64BIT - -#ifdef CONFIG_MIPS32_N32 -#define __SET_PERSONALITY32_N32() \ - do { \ - set_thread_flag(TIF_32BIT_ADDR); \ - current->thread.abi = &mips_abi_n32; \ - } while (0) -#else -#define __SET_PERSONALITY32_N32() \ - do { } while (0) -#endif - -#ifdef CONFIG_MIPS32_O32 -#define __SET_PERSONALITY32_O32() \ - do { \ - set_thread_flag(TIF_32BIT_REGS); \ - set_thread_flag(TIF_32BIT_ADDR); \ - current->thread.abi = &mips_abi_32; \ - } while (0) -#else -#define __SET_PERSONALITY32_O32() \ - do { } while (0) -#endif - -#ifdef CONFIG_MIPS32_COMPAT -#define __SET_PERSONALITY32(ex) \ -do { \ - if ((((ex).e_flags & EF_MIPS_ABI2) != 0) && \ - ((ex).e_flags & EF_MIPS_ABI) == 0) \ - __SET_PERSONALITY32_N32(); \ - else \ - __SET_PERSONALITY32_O32(); \ -} while (0) -#else -#define __SET_PERSONALITY32(ex) do { } while (0) -#endif - -#define SET_PERSONALITY(ex, ibcs2) \ -do { \ - clear_thread_flag(TIF_32BIT_REGS); \ - clear_thread_flag(TIF_32BIT_ADDR); \ - \ - if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ - __SET_PERSONALITY32(ex); \ - else \ - current->thread.abi = &mips_abi; \ - \ - if (ibcs2) \ - set_personality(PER_SVR4); \ - else if (current->personality != PER_LINUX32) \ - set_personality(PER_LINUX); \ -} while (0) - -#endif /* CONFIG_64BIT */ - -struct task_struct; - -extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs); -extern int dump_task_regs(struct task_struct *, elf_gregset_t *); -extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); - -#define ELF_CORE_COPY_REGS(elf_regs, regs) \ - elf_dump_regs((elf_greg_t *)&(elf_regs), regs); -#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) -#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \ - dump_task_fpu(tsk, elf_fpregs) - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE PAGE_SIZE - -/* This yields a mask that user programs can use to figure out what - instruction set this cpu supports. This could be done in userspace, - but it's not easy, and we've already done it here. */ - -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. - - For the moment, we have only optimizations for the Intel generations, - but that could change... */ - -#define ELF_PLATFORM (NULL) - -/* - * See comments in asm-alpha/elf.h, this is the same thing - * on the MIPS. - */ -#define ELF_PLAT_INIT(_r, load_addr) do { \ - _r->regs[1] = _r->regs[2] = _r->regs[3] = _r->regs[4] = 0; \ - _r->regs[5] = _r->regs[6] = _r->regs[7] = _r->regs[8] = 0; \ - _r->regs[9] = _r->regs[10] = _r->regs[11] = _r->regs[12] = 0; \ - _r->regs[13] = _r->regs[14] = _r->regs[15] = _r->regs[16] = 0; \ - _r->regs[17] = _r->regs[18] = _r->regs[19] = _r->regs[20] = 0; \ - _r->regs[21] = _r->regs[22] = _r->regs[23] = _r->regs[24] = 0; \ - _r->regs[25] = _r->regs[26] = _r->regs[27] = _r->regs[28] = 0; \ - _r->regs[30] = _r->regs[31] = 0; \ -} while (0) - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#ifndef ELF_ET_DYN_BASE -#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) -#endif - -#endif /* _ASM_ELF_H */ diff --git a/include/asm-mips/emergency-restart.h b/include/asm-mips/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/include/asm-mips/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-mips/emma2rh/emma2rh.h b/include/asm-mips/emma2rh/emma2rh.h deleted file mode 100644 index 6a1af0af51e3..000000000000 --- a/include/asm-mips/emma2rh/emma2rh.h +++ /dev/null @@ -1,333 +0,0 @@ -/* - * include/asm-mips/emma2rh/emma2rh.h - * This file is EMMA2RH common header. - * - * Copyright (C) NEC Electronics Corporation 2005-2006 - * - * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_EMMA2RH_EMMA2RH_H -#define __ASM_EMMA2RH_EMMA2RH_H - -#include - -/* - * EMMA2RH registers - */ -#define REGBASE 0x10000000 - -#define EMMA2RH_BHIF_STRAP_0 (0x000010+REGBASE) -#define EMMA2RH_BHIF_INT_ST_0 (0x000030+REGBASE) -#define EMMA2RH_BHIF_INT_ST_1 (0x000034+REGBASE) -#define EMMA2RH_BHIF_INT_ST_2 (0x000038+REGBASE) -#define EMMA2RH_BHIF_INT_EN_0 (0x000040+REGBASE) -#define EMMA2RH_BHIF_INT_EN_1 (0x000044+REGBASE) -#define EMMA2RH_BHIF_INT_EN_2 (0x000048+REGBASE) -#define EMMA2RH_BHIF_INT1_EN_0 (0x000050+REGBASE) -#define EMMA2RH_BHIF_INT1_EN_1 (0x000054+REGBASE) -#define EMMA2RH_BHIF_INT1_EN_2 (0x000058+REGBASE) -#define EMMA2RH_BHIF_SW_INT (0x000070+REGBASE) -#define EMMA2RH_BHIF_SW_INT_EN (0x000080+REGBASE) -#define EMMA2RH_BHIF_SW_INT_CLR (0x000090+REGBASE) -#define EMMA2RH_BHIF_MAIN_CTRL (0x0000b4+REGBASE) -#define EMMA2RH_BHIF_EXCEPT_VECT_BASE_ADDRESS (0x0000c0+REGBASE) -#define EMMA2RH_GPIO_DIR (0x110d20+REGBASE) -#define EMMA2RH_GPIO_INT_ST (0x110d30+REGBASE) -#define EMMA2RH_GPIO_INT_MASK (0x110d3c+REGBASE) -#define EMMA2RH_GPIO_INT_MODE (0x110d48+REGBASE) -#define EMMA2RH_GPIO_INT_CND_A (0x110d54+REGBASE) -#define EMMA2RH_GPIO_INT_CND_B (0x110d60+REGBASE) -#define EMMA2RH_PBRD_INT_EN (0x100010+REGBASE) -#define EMMA2RH_PBRD_CLKSEL (0x100028+REGBASE) -#define EMMA2RH_PFUR0_BASE (0x101000+REGBASE) -#define EMMA2RH_PFUR1_BASE (0x102000+REGBASE) -#define EMMA2RH_PFUR2_BASE (0x103000+REGBASE) -#define EMMA2RH_PIIC0_BASE (0x107000+REGBASE) -#define EMMA2RH_PIIC1_BASE (0x108000+REGBASE) -#define EMMA2RH_PIIC2_BASE (0x109000+REGBASE) -#define EMMA2RH_PCI_CONTROL (0x200000+REGBASE) -#define EMMA2RH_PCI_ARBIT_CTR (0x200004+REGBASE) -#define EMMA2RH_PCI_IWIN0_CTR (0x200010+REGBASE) -#define EMMA2RH_PCI_IWIN1_CTR (0x200014+REGBASE) -#define EMMA2RH_PCI_INIT_ESWP (0x200018+REGBASE) -#define EMMA2RH_PCI_INT (0x200020+REGBASE) -#define EMMA2RH_PCI_INT_EN (0x200024+REGBASE) -#define EMMA2RH_PCI_TWIN_CTR (0x200030+REGBASE) -#define EMMA2RH_PCI_TWIN_BADR (0x200034+REGBASE) -#define EMMA2RH_PCI_TWIN0_DADR (0x200038+REGBASE) -#define EMMA2RH_PCI_TWIN1_DADR (0x20003c+REGBASE) - -/* - * Memory map (physical address) - * - * Note most of the following address must be properly aligned by the - * corresponding size. For example, if PCI_IO_SIZE is 16MB, then - * PCI_IO_BASE must be aligned along 16MB boundary. - */ - -/* the actual ram size is detected at run-time */ -#define EMMA2RH_RAM_BASE 0x00000000 -#define EMMA2RH_RAM_SIZE 0x10000000 /* less than 256MB */ - -#define EMMA2RH_IO_BASE 0x10000000 -#define EMMA2RH_IO_SIZE 0x01000000 /* 16 MB */ - -#define EMMA2RH_GENERALIO_BASE 0x11000000 -#define EMMA2RH_GENERALIO_SIZE 0x01000000 /* 16 MB */ - -#define EMMA2RH_PCI_IO_BASE 0x12000000 -#define EMMA2RH_PCI_IO_SIZE 0x02000000 /* 32 MB */ - -#define EMMA2RH_PCI_MEM_BASE 0x14000000 -#define EMMA2RH_PCI_MEM_SIZE 0x08000000 /* 128 MB */ - -#define EMMA2RH_ROM_BASE 0x1c000000 -#define EMMA2RH_ROM_SIZE 0x04000000 /* 64 MB */ - -#define EMMA2RH_PCI_CONFIG_BASE EMMA2RH_PCI_IO_BASE -#define EMMA2RH_PCI_CONFIG_SIZE EMMA2RH_PCI_IO_SIZE - -#define NUM_CPU_IRQ 8 -#define NUM_EMMA2RH_IRQ 96 - -#define CPU_EMMA2RH_CASCADE 2 -#define CPU_IRQ_BASE MIPS_CPU_IRQ_BASE -#define EMMA2RH_IRQ_BASE (CPU_IRQ_BASE + NUM_CPU_IRQ) - -/* - * emma2rh irq defs - */ - -#define EMMA2RH_IRQ_INT0 (0 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT1 (1 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT2 (2 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT3 (3 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT4 (4 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT5 (5 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT6 (6 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT7 (7 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT8 (8 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT9 (9 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT10 (10 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT11 (11 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT12 (12 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT13 (13 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT14 (14 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT15 (15 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT16 (16 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT17 (17 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT18 (18 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT19 (19 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT20 (20 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT21 (21 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT22 (22 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT23 (23 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT24 (24 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT25 (25 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT26 (26 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT27 (27 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT28 (28 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT29 (29 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT30 (30 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT31 (31 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT32 (32 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT33 (33 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT34 (34 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT35 (35 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT36 (36 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT37 (37 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT38 (38 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT39 (39 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT40 (40 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT41 (41 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT42 (42 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT43 (43 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT44 (44 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT45 (45 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT46 (46 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT47 (47 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT48 (48 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT49 (49 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT50 (50 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT51 (51 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT52 (52 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT53 (53 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT54 (54 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT55 (55 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT56 (56 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT57 (57 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT58 (58 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT59 (59 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT60 (60 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT61 (61 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT62 (62 + EMMA2RH_IRQ_BASE) -#define EMMA2RH_IRQ_INT63 (63 + EMMA2RH_IRQ_BASE) - -#define EMMA2RH_IRQ_PFUR0 EMMA2RH_IRQ_INT49 -#define EMMA2RH_IRQ_PFUR1 EMMA2RH_IRQ_INT50 -#define EMMA2RH_IRQ_PFUR2 EMMA2RH_IRQ_INT51 -#define EMMA2RH_IRQ_PIIC0 EMMA2RH_IRQ_INT56 -#define EMMA2RH_IRQ_PIIC1 EMMA2RH_IRQ_INT57 -#define EMMA2RH_IRQ_PIIC2 EMMA2RH_IRQ_INT58 - -/* - * EMMA2RH Register Access - */ - -#define EMMA2RH_BASE (0xa0000000) - -static inline void emma2rh_sync(void) -{ - volatile u32 *p = (volatile u32 *)0xbfc00000; - (void)(*p); -} - -static inline void emma2rh_out32(u32 offset, u32 val) -{ - *(volatile u32 *)(EMMA2RH_BASE | offset) = val; - emma2rh_sync(); -} - -static inline u32 emma2rh_in32(u32 offset) -{ - u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset); - emma2rh_sync(); - return val; -} - -static inline void emma2rh_out16(u32 offset, u16 val) -{ - *(volatile u16 *)(EMMA2RH_BASE | offset) = val; - emma2rh_sync(); -} - -static inline u16 emma2rh_in16(u32 offset) -{ - u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset); - emma2rh_sync(); - return val; -} - -static inline void emma2rh_out8(u32 offset, u8 val) -{ - *(volatile u8 *)(EMMA2RH_BASE | offset) = val; - emma2rh_sync(); -} - -static inline u8 emma2rh_in8(u32 offset) -{ - u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset); - emma2rh_sync(); - return val; -} - -/** - * IIC registers map - **/ - -/*---------------------------------------------------------------------------*/ -/* CNT - Control register (00H R/W) */ -/*---------------------------------------------------------------------------*/ -#define SPT 0x00000001 -#define STT 0x00000002 -#define ACKE 0x00000004 -#define WTIM 0x00000008 -#define SPIE 0x00000010 -#define WREL 0x00000020 -#define LREL 0x00000040 -#define IICE 0x00000080 -#define CNT_RESERVED 0x000000ff /* reserved bit 0 */ - -#define I2C_EMMA_START (IICE | STT) -#define I2C_EMMA_STOP (IICE | SPT) -#define I2C_EMMA_REPSTART I2C_EMMA_START - -/*---------------------------------------------------------------------------*/ -/* STA - Status register (10H Read) */ -/*---------------------------------------------------------------------------*/ -#define MSTS 0x00000080 -#define ALD 0x00000040 -#define EXC 0x00000020 -#define COI 0x00000010 -#define TRC 0x00000008 -#define ACKD 0x00000004 -#define STD 0x00000002 -#define SPD 0x00000001 - -/*---------------------------------------------------------------------------*/ -/* CSEL - Clock select register (20H R/W) */ -/*---------------------------------------------------------------------------*/ -#define FCL 0x00000080 -#define ND50 0x00000040 -#define CLD 0x00000020 -#define DAD 0x00000010 -#define SMC 0x00000008 -#define DFC 0x00000004 -#define CL 0x00000003 -#define CSEL_RESERVED 0x000000ff /* reserved bit 0 */ - -#define FAST397 0x0000008b -#define FAST297 0x0000008a -#define FAST347 0x0000000b -#define FAST260 0x0000000a -#define FAST130 0x00000008 -#define STANDARD108 0x00000083 -#define STANDARD83 0x00000082 -#define STANDARD95 0x00000003 -#define STANDARD73 0x00000002 -#define STANDARD36 0x00000001 -#define STANDARD71 0x00000000 - -/*---------------------------------------------------------------------------*/ -/* SVA - Slave address register (30H R/W) */ -/*---------------------------------------------------------------------------*/ -#define SVA 0x000000fe - -/*---------------------------------------------------------------------------*/ -/* SHR - Shift register (40H R/W) */ -/*---------------------------------------------------------------------------*/ -#define SR 0x000000ff - -/*---------------------------------------------------------------------------*/ -/* INT - Interrupt register (50H R/W) */ -/* INTM - Interrupt mask register (60H R/W) */ -/*---------------------------------------------------------------------------*/ -#define INTE0 0x00000001 - -/*********************************************************************** - * I2C registers - *********************************************************************** - */ -#define I2C_EMMA_CNT 0x00 -#define I2C_EMMA_STA 0x10 -#define I2C_EMMA_CSEL 0x20 -#define I2C_EMMA_SVA 0x30 -#define I2C_EMMA_SHR 0x40 -#define I2C_EMMA_INT 0x50 -#define I2C_EMMA_INTM 0x60 - -/* - * include the board dependent part - */ -#if defined(CONFIG_MARKEINS) -#include -#else -#error "Unknown EMMA2RH board!" -#endif - -#endif /* __ASM_EMMA2RH_EMMA2RH_H */ diff --git a/include/asm-mips/emma2rh/markeins.h b/include/asm-mips/emma2rh/markeins.h deleted file mode 100644 index 973b0628490d..000000000000 --- a/include/asm-mips/emma2rh/markeins.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * include/asm-mips/emma2rh/markeins.h - * This file is EMMA2RH board depended header. - * - * Copyright (C) NEC Electronics Corporation 2005-2006 - * - * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef MARKEINS_H -#define MARKEINS_H - -#define NUM_EMMA2RH_IRQ_SW 32 -#define NUM_EMMA2RH_IRQ_GPIO 32 - -#define EMMA2RH_SW_CASCADE (EMMA2RH_IRQ_INT7 - EMMA2RH_IRQ_INT0) -#define EMMA2RH_GPIO_CASCADE (EMMA2RH_IRQ_INT46 - EMMA2RH_IRQ_INT0) - -#define EMMA2RH_SW_IRQ_BASE (EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ) -#define EMMA2RH_GPIO_IRQ_BASE (EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW) - -#define EMMA2RH_SW_IRQ_INT0 (0+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT1 (1+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT2 (2+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT3 (3+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT4 (4+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT5 (5+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT6 (6+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT7 (7+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT8 (8+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT9 (9+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT10 (10+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT11 (11+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT12 (12+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT13 (13+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT14 (14+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT15 (15+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT16 (16+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT17 (17+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT18 (18+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT19 (19+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT20 (20+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT21 (21+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT22 (22+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT23 (23+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT24 (24+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT25 (25+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT26 (26+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT27 (27+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT28 (28+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT29 (29+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT30 (30+EMMA2RH_SW_IRQ_BASE) -#define EMMA2RH_SW_IRQ_INT31 (31+EMMA2RH_SW_IRQ_BASE) - -#define MARKEINS_PCI_IRQ_INTA EMMA2RH_GPIO_IRQ_BASE+15 -#define MARKEINS_PCI_IRQ_INTB EMMA2RH_GPIO_IRQ_BASE+16 -#define MARKEINS_PCI_IRQ_INTC EMMA2RH_GPIO_IRQ_BASE+17 -#define MARKEINS_PCI_IRQ_INTD EMMA2RH_GPIO_IRQ_BASE+18 - -#endif /* CONFIG_MARKEINS */ diff --git a/include/asm-mips/errno.h b/include/asm-mips/errno.h deleted file mode 100644 index 3c0d840e4577..000000000000 --- a/include/asm-mips/errno.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle - */ -#ifndef _ASM_ERRNO_H -#define _ASM_ERRNO_H - -/* - * These error numbers are intended to be MIPS ABI compatible - */ - -#include - -#define ENOMSG 35 /* No message of desired type */ -#define EIDRM 36 /* Identifier removed */ -#define ECHRNG 37 /* Channel number out of range */ -#define EL2NSYNC 38 /* Level 2 not synchronized */ -#define EL3HLT 39 /* Level 3 halted */ -#define EL3RST 40 /* Level 3 reset */ -#define ELNRNG 41 /* Link number out of range */ -#define EUNATCH 42 /* Protocol driver not attached */ -#define ENOCSI 43 /* No CSI structure available */ -#define EL2HLT 44 /* Level 2 halted */ -#define EDEADLK 45 /* Resource deadlock would occur */ -#define ENOLCK 46 /* No record locks available */ -#define EBADE 50 /* Invalid exchange */ -#define EBADR 51 /* Invalid request descriptor */ -#define EXFULL 52 /* Exchange full */ -#define ENOANO 53 /* No anode */ -#define EBADRQC 54 /* Invalid request code */ -#define EBADSLT 55 /* Invalid slot */ -#define EDEADLOCK 56 /* File locking deadlock error */ -#define EBFONT 59 /* Bad font file format */ -#define ENOSTR 60 /* Device not a stream */ -#define ENODATA 61 /* No data available */ -#define ETIME 62 /* Timer expired */ -#define ENOSR 63 /* Out of streams resources */ -#define ENONET 64 /* Machine is not on the network */ -#define ENOPKG 65 /* Package not installed */ -#define EREMOTE 66 /* Object is remote */ -#define ENOLINK 67 /* Link has been severed */ -#define EADV 68 /* Advertise error */ -#define ESRMNT 69 /* Srmount error */ -#define ECOMM 70 /* Communication error on send */ -#define EPROTO 71 /* Protocol error */ -#define EDOTDOT 73 /* RFS specific error */ -#define EMULTIHOP 74 /* Multihop attempted */ -#define EBADMSG 77 /* Not a data message */ -#define ENAMETOOLONG 78 /* File name too long */ -#define EOVERFLOW 79 /* Value too large for defined data type */ -#define ENOTUNIQ 80 /* Name not unique on network */ -#define EBADFD 81 /* File descriptor in bad state */ -#define EREMCHG 82 /* Remote address changed */ -#define ELIBACC 83 /* Can not access a needed shared library */ -#define ELIBBAD 84 /* Accessing a corrupted shared library */ -#define ELIBSCN 85 /* .lib section in a.out corrupted */ -#define ELIBMAX 86 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 87 /* Cannot exec a shared library directly */ -#define EILSEQ 88 /* Illegal byte sequence */ -#define ENOSYS 89 /* Function not implemented */ -#define ELOOP 90 /* Too many symbolic links encountered */ -#define ERESTART 91 /* Interrupted system call should be restarted */ -#define ESTRPIPE 92 /* Streams pipe error */ -#define ENOTEMPTY 93 /* Directory not empty */ -#define EUSERS 94 /* Too many users */ -#define ENOTSOCK 95 /* Socket operation on non-socket */ -#define EDESTADDRREQ 96 /* Destination address required */ -#define EMSGSIZE 97 /* Message too long */ -#define EPROTOTYPE 98 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 99 /* Protocol not available */ -#define EPROTONOSUPPORT 120 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 121 /* Socket type not supported */ -#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 123 /* Protocol family not supported */ -#define EAFNOSUPPORT 124 /* Address family not supported by protocol */ -#define EADDRINUSE 125 /* Address already in use */ -#define EADDRNOTAVAIL 126 /* Cannot assign requested address */ -#define ENETDOWN 127 /* Network is down */ -#define ENETUNREACH 128 /* Network is unreachable */ -#define ENETRESET 129 /* Network dropped connection because of reset */ -#define ECONNABORTED 130 /* Software caused connection abort */ -#define ECONNRESET 131 /* Connection reset by peer */ -#define ENOBUFS 132 /* No buffer space available */ -#define EISCONN 133 /* Transport endpoint is already connected */ -#define ENOTCONN 134 /* Transport endpoint is not connected */ -#define EUCLEAN 135 /* Structure needs cleaning */ -#define ENOTNAM 137 /* Not a XENIX named type file */ -#define ENAVAIL 138 /* No XENIX semaphores available */ -#define EISNAM 139 /* Is a named type file */ -#define EREMOTEIO 140 /* Remote I/O error */ -#define EINIT 141 /* Reserved */ -#define EREMDEV 142 /* Error 142 */ -#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 144 /* Too many references: cannot splice */ -#define ETIMEDOUT 145 /* Connection timed out */ -#define ECONNREFUSED 146 /* Connection refused */ -#define EHOSTDOWN 147 /* Host is down */ -#define EHOSTUNREACH 148 /* No route to host */ -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define EALREADY 149 /* Operation already in progress */ -#define EINPROGRESS 150 /* Operation now in progress */ -#define ESTALE 151 /* Stale NFS file handle */ -#define ECANCELED 158 /* AIO operation canceled */ - -/* - * These error are Linux extensions. - */ -#define ENOMEDIUM 159 /* No medium found */ -#define EMEDIUMTYPE 160 /* Wrong medium type */ -#define ENOKEY 161 /* Required key not available */ -#define EKEYEXPIRED 162 /* Key has expired */ -#define EKEYREVOKED 163 /* Key has been revoked */ -#define EKEYREJECTED 164 /* Key was rejected by service */ - -/* for robust mutexes */ -#define EOWNERDEAD 165 /* Owner died */ -#define ENOTRECOVERABLE 166 /* State not recoverable */ - -#define EDQUOT 1133 /* Quota exceeded */ - -#ifdef __KERNEL__ - -/* The biggest error number defined here or in . */ -#define EMAXERRNO 1133 - -#endif /* __KERNEL__ */ - -#endif /* _ASM_ERRNO_H */ diff --git a/include/asm-mips/fb.h b/include/asm-mips/fb.h deleted file mode 100644 index bd3f68c9ddfc..000000000000 --- a/include/asm-mips/fb.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-mips/fcntl.h b/include/asm-mips/fcntl.h deleted file mode 100644 index 2a52333a062d..000000000000 --- a/include/asm-mips/fcntl.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 96, 97, 98, 99, 2003, 05 Ralf Baechle - */ -#ifndef _ASM_FCNTL_H -#define _ASM_FCNTL_H - - -#define O_APPEND 0x0008 -#define O_SYNC 0x0010 -#define O_NONBLOCK 0x0080 -#define O_CREAT 0x0100 /* not fcntl */ -#define O_TRUNC 0x0200 /* not fcntl */ -#define O_EXCL 0x0400 /* not fcntl */ -#define O_NOCTTY 0x0800 /* not fcntl */ -#define FASYNC 0x1000 /* fcntl, for BSD compatibility */ -#define O_LARGEFILE 0x2000 /* allow large file opens */ -#define O_DIRECT 0x8000 /* direct disk access hint */ - -#define F_GETLK 14 -#define F_SETLK 6 -#define F_SETLKW 7 - -#define F_SETOWN 24 /* for sockets. */ -#define F_GETOWN 23 /* for sockets. */ - -#ifndef __mips64 -#define F_GETLK64 33 /* using 'struct flock64' */ -#define F_SETLK64 34 -#define F_SETLKW64 35 -#endif - -/* - * The flavours of struct flock. "struct flock" is the ABI compliant - * variant. Finally struct flock64 is the LFS variant of struct flock. As - * a historic accident and inconsistence with the ABI definition it doesn't - * contain all the same fields as struct flock. - */ - -#ifdef CONFIG_32BIT - -struct flock { - short l_type; - short l_whence; - off_t l_start; - off_t l_len; - long l_sysid; - __kernel_pid_t l_pid; - long pad[4]; -}; - -#define HAVE_ARCH_STRUCT_FLOCK - -#endif /* CONFIG_32BIT */ - -#include - -#endif /* _ASM_FCNTL_H */ diff --git a/include/asm-mips/fixmap.h b/include/asm-mips/fixmap.h deleted file mode 100644 index 9cc8522a394f..000000000000 --- a/include/asm-mips/fixmap.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * fixmap.h: compile-time virtual memory allocation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998 Ingo Molnar - * - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 - */ - -#ifndef _ASM_FIXMAP_H -#define _ASM_FIXMAP_H - -#include -#ifdef CONFIG_HIGHMEM -#include -#include -#endif - -/* - * Here we define all the compile-time 'special' virtual - * addresses. The point is to have a constant address at - * compile time, but to set the physical address only - * in the boot process. We allocate these special addresses - * from the end of virtual memory (0xfffff000) backwards. - * Also this lets us do fail-safe vmalloc(), we - * can guarantee that these special addresses and - * vmalloc()-ed addresses never overlap. - * - * these 'compile-time allocated' memory buffers are - * fixed-size 4k pages. (or larger if used with an increment - * highger than 1) use fixmap_set(idx,phys) to associate - * physical memory with fixmap indices. - * - * TLB entries of such buffers will not be flushed across - * task switches. - */ - -/* - * on UP currently we will have no trace of the fixmap mechanizm, - * no page table allocations, etc. This might change in the - * future, say framebuffers for the console driver(s) could be - * fix-mapped? - */ -enum fixed_addresses { -#define FIX_N_COLOURS 8 - FIX_CMAP_BEGIN, -#ifdef CONFIG_MIPS_MT_SMTC - FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS), -#else - FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS, -#endif -#ifdef CONFIG_HIGHMEM - /* reserved pte's for temporary kernel mappings */ - FIX_KMAP_BEGIN = FIX_CMAP_END + 1, - FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, -#endif - __end_of_fixed_addresses -}; - -/* - * used by vmalloc.c. - * - * Leave one empty page between vmalloc'ed areas and - * the start of the fixmap, and leave one page empty - * at the top of mem.. - */ -#if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX) -#define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000)) -#else -#define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000) -#endif -#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) - -#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) -#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) - -extern void __this_fixmap_does_not_exist(void); - -/* - * 'index to address' translation. If anyone tries to use the idx - * directly without tranlation, we catch the bug with a NULL-deference - * kernel oops. Illegal ranges of incoming indices are caught too. - */ -static inline unsigned long fix_to_virt(const unsigned int idx) -{ - /* - * this branch gets completely eliminated after inlining, - * except when someone tries to use fixaddr indices in an - * illegal way. (such as mixing up address types or using - * out-of-range indices). - * - * If it doesn't get removed, the linker will complain - * loudly with a reasonably clear error message.. - */ - if (idx >= __end_of_fixed_addresses) - __this_fixmap_does_not_exist(); - - return __fix_to_virt(idx); -} - -static inline unsigned long virt_to_fix(const unsigned long vaddr) -{ - BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); - return __virt_to_fix(vaddr); -} - -/* - * Called from pgtable_init() - */ -extern void fixrange_init(unsigned long start, unsigned long end, - pgd_t *pgd_base); - - -#endif diff --git a/include/asm-mips/floppy.h b/include/asm-mips/floppy.h deleted file mode 100644 index 992d232adc83..000000000000 --- a/include/asm-mips/floppy.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Architecture specific parts of the Floppy driver - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 - 2000 Ralf Baechle - */ -#ifndef _ASM_FLOPPY_H -#define _ASM_FLOPPY_H - -#include - -static inline void fd_cacheflush(char * addr, long size) -{ - dma_cache_sync(NULL, addr, size, DMA_BIDIRECTIONAL); -} - -#define MAX_BUFFER_SECTORS 24 - - -/* - * And on Mips's the CMOS info fails also ... - * - * FIXME: This information should come from the ARC configuration tree - * or whereever a particular machine has stored this ... - */ -#define FLOPPY0_TYPE fd_drive_type(0) -#define FLOPPY1_TYPE fd_drive_type(1) - -#define FDC1 fd_getfdaddr1(); - -#define N_FDC 1 /* do you *really* want a second controller? */ -#define N_DRIVE 8 - -/* - * The DMA channel used by the floppy controller cannot access data at - * addresses >= 16MB - * - * Went back to the 1MB limit, as some people had problems with the floppy - * driver otherwise. It doesn't matter much for performance anyway, as most - * floppy accesses go through the track buffer. - * - * On MIPSes using vdma, this actually means that *all* transfers go thru - * the * track buffer since 0x1000000 is always smaller than KSEG0/1. - * Actually this needs to be a bit more complicated since the so much different - * hardware available with MIPS CPUs ... - */ -#define CROSS_64KB(a, s) ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64) - -#define EXTRA_FLOPPY_PARAMS - -#include - -#endif /* _ASM_FLOPPY_H */ diff --git a/include/asm-mips/fpregdef.h b/include/asm-mips/fpregdef.h deleted file mode 100644 index 2b5fddc8f487..000000000000 --- a/include/asm-mips/fpregdef.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Definitions for the FPU register names - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1999 Ralf Baechle - * Copyright (C) 1985 MIPS Computer Systems, Inc. - * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_FPREGDEF_H -#define _ASM_FPREGDEF_H - -#include - -#if _MIPS_SIM == _MIPS_SIM_ABI32 - -/* - * These definitions only cover the R3000-ish 16/32 register model. - * But we're trying to be R3000 friendly anyway ... - */ -#define fv0 $f0 /* return value */ -#define fv0f $f1 -#define fv1 $f2 -#define fv1f $f3 -#define fa0 $f12 /* argument registers */ -#define fa0f $f13 -#define fa1 $f14 -#define fa1f $f15 -#define ft0 $f4 /* caller saved */ -#define ft0f $f5 -#define ft1 $f6 -#define ft1f $f7 -#define ft2 $f8 -#define ft2f $f9 -#define ft3 $f10 -#define ft3f $f11 -#define ft4 $f16 -#define ft4f $f17 -#define ft5 $f18 -#define ft5f $f19 -#define fs0 $f20 /* callee saved */ -#define fs0f $f21 -#define fs1 $f22 -#define fs1f $f23 -#define fs2 $f24 -#define fs2f $f25 -#define fs3 $f26 -#define fs3f $f27 -#define fs4 $f28 -#define fs4f $f29 -#define fs5 $f30 -#define fs5f $f31 - -#define fcr31 $31 /* FPU status register */ - -#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ - -#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 - -#define fv0 $f0 /* return value */ -#define fv1 $f2 -#define fa0 $f12 /* argument registers */ -#define fa1 $f13 -#define fa2 $f14 -#define fa3 $f15 -#define fa4 $f16 -#define fa5 $f17 -#define fa6 $f18 -#define fa7 $f19 -#define ft0 $f4 /* caller saved */ -#define ft1 $f5 -#define ft2 $f6 -#define ft3 $f7 -#define ft4 $f8 -#define ft5 $f9 -#define ft6 $f10 -#define ft7 $f11 -#define ft8 $f20 -#define ft9 $f21 -#define ft10 $f22 -#define ft11 $f23 -#define ft12 $f1 -#define ft13 $f3 -#define fs0 $f24 /* callee saved */ -#define fs1 $f25 -#define fs2 $f26 -#define fs3 $f27 -#define fs4 $f28 -#define fs5 $f29 -#define fs6 $f30 -#define fs7 $f31 - -#define fcr31 $31 - -#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */ - -#endif /* _ASM_FPREGDEF_H */ diff --git a/include/asm-mips/fpu.h b/include/asm-mips/fpu.h deleted file mode 100644 index 8a3ef247659a..000000000000 --- a/include/asm-mips/fpu.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Copyright (C) 2002 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_FPU_H -#define _ASM_FPU_H - -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_MIPS_MT_FPAFF -#include -#endif - -struct sigcontext; -struct sigcontext32; - -extern asmlinkage int (*save_fp_context)(struct sigcontext __user *sc); -extern asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc); - -extern asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc); -extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc); - -extern void fpu_emulator_init_fpu(void); -extern int fpu_emulator_save_context(struct sigcontext __user *sc); -extern int fpu_emulator_restore_context(struct sigcontext __user *sc); -extern void _init_fpu(void); -extern void _save_fp(struct task_struct *); -extern void _restore_fp(struct task_struct *); - -#define __enable_fpu() \ -do { \ - set_c0_status(ST0_CU1); \ - enable_fpu_hazard(); \ -} while (0) - -#define __disable_fpu() \ -do { \ - clear_c0_status(ST0_CU1); \ - disable_fpu_hazard(); \ -} while (0) - -#define enable_fpu() \ -do { \ - if (cpu_has_fpu) \ - __enable_fpu(); \ -} while (0) - -#define disable_fpu() \ -do { \ - if (cpu_has_fpu) \ - __disable_fpu(); \ -} while (0) - - -#define clear_fpu_owner() clear_thread_flag(TIF_USEDFPU) - -static inline int __is_fpu_owner(void) -{ - return test_thread_flag(TIF_USEDFPU); -} - -static inline int is_fpu_owner(void) -{ - return cpu_has_fpu && __is_fpu_owner(); -} - -static inline void __own_fpu(void) -{ - __enable_fpu(); - KSTK_STATUS(current) |= ST0_CU1; - set_thread_flag(TIF_USEDFPU); -} - -static inline void own_fpu_inatomic(int restore) -{ - if (cpu_has_fpu && !__is_fpu_owner()) { - __own_fpu(); - if (restore) - _restore_fp(current); - } -} - -static inline void own_fpu(int restore) -{ - preempt_disable(); - own_fpu_inatomic(restore); - preempt_enable(); -} - -static inline void lose_fpu(int save) -{ - preempt_disable(); - if (is_fpu_owner()) { - if (save) - _save_fp(current); - KSTK_STATUS(current) &= ~ST0_CU1; - clear_thread_flag(TIF_USEDFPU); - __disable_fpu(); - } - preempt_enable(); -} - -static inline void init_fpu(void) -{ - preempt_disable(); - if (cpu_has_fpu) { - __own_fpu(); - _init_fpu(); - } else { - fpu_emulator_init_fpu(); - } - preempt_enable(); -} - -static inline void save_fp(struct task_struct *tsk) -{ - if (cpu_has_fpu) - _save_fp(tsk); -} - -static inline void restore_fp(struct task_struct *tsk) -{ - if (cpu_has_fpu) - _restore_fp(tsk); -} - -static inline fpureg_t *get_fpu_regs(struct task_struct *tsk) -{ - if (tsk == current) { - preempt_disable(); - if (is_fpu_owner()) - _save_fp(current); - preempt_enable(); - } - - return tsk->thread.fpu.fpr; -} - -#endif /* _ASM_FPU_H */ diff --git a/include/asm-mips/fpu_emulator.h b/include/asm-mips/fpu_emulator.h deleted file mode 100644 index 2731c38bd7ae..000000000000 --- a/include/asm-mips/fpu_emulator.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Further private data for which no space exists in mips_fpu_struct. - * This should be subsumed into the mips_fpu_struct structure as - * defined in processor.h as soon as the absurd wired absolute assembler - * offsets become dynamic at compile time. - * - * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - */ -#ifndef _ASM_FPU_EMULATOR_H -#define _ASM_FPU_EMULATOR_H - -struct mips_fpu_emulator_stats { - unsigned int emulated; - unsigned int loads; - unsigned int stores; - unsigned int cp1ops; - unsigned int cp1xops; - unsigned int errors; -}; - -extern struct mips_fpu_emulator_stats fpuemustats; - -#endif /* _ASM_FPU_EMULATOR_H */ diff --git a/include/asm-mips/futex.h b/include/asm-mips/futex.h deleted file mode 100644 index b9cce90346cf..000000000000 --- a/include/asm-mips/futex.h +++ /dev/null @@ -1,203 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2006 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ -{ \ - if (cpu_has_llsc && R10000_LLSC_WAR) { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " .set mips3 \n" \ - "1: ll %1, %4 # __futex_atomic_op \n" \ - " .set mips0 \n" \ - " " insn " \n" \ - " .set mips3 \n" \ - "2: sc $1, %2 \n" \ - " beqzl $1, 1b \n" \ - __WEAK_LLSC_MB \ - "3: \n" \ - " .set pop \n" \ - " .set mips0 \n" \ - " .section .fixup,\"ax\" \n" \ - "4: li %0, %6 \n" \ - " j 3b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " "__UA_ADDR "\t1b, 4b \n" \ - " "__UA_ADDR "\t2b, 4b \n" \ - " .previous \n" \ - : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) \ - : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) \ - : "memory"); \ - } else if (cpu_has_llsc) { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " .set mips3 \n" \ - "1: ll %1, %4 # __futex_atomic_op \n" \ - " .set mips0 \n" \ - " " insn " \n" \ - " .set mips3 \n" \ - "2: sc $1, %2 \n" \ - " beqz $1, 1b \n" \ - __WEAK_LLSC_MB \ - "3: \n" \ - " .set pop \n" \ - " .set mips0 \n" \ - " .section .fixup,\"ax\" \n" \ - "4: li %0, %6 \n" \ - " j 3b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " "__UA_ADDR "\t1b, 4b \n" \ - " "__UA_ADDR "\t2b, 4b \n" \ - " .previous \n" \ - : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) \ - : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) \ - : "memory"); \ - } else \ - ret = -ENOSYS; \ -} - -static inline int -futex_atomic_op_inuser(int encoded_op, int __user *uaddr) -{ - int op = (encoded_op >> 28) & 7; - int cmp = (encoded_op >> 24) & 15; - int oparg = (encoded_op << 8) >> 20; - int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; - if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) - oparg = 1 << oparg; - - if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - pagefault_disable(); - - switch (op) { - case FUTEX_OP_SET: - __futex_atomic_op("move $1, %z5", ret, oldval, uaddr, oparg); - break; - - case FUTEX_OP_ADD: - __futex_atomic_op("addu $1, %1, %z5", - ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_OR: - __futex_atomic_op("or $1, %1, %z5", - ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_ANDN: - __futex_atomic_op("and $1, %1, %z5", - ret, oldval, uaddr, ~oparg); - break; - case FUTEX_OP_XOR: - __futex_atomic_op("xor $1, %1, %z5", - ret, oldval, uaddr, oparg); - break; - default: - ret = -ENOSYS; - } - - pagefault_enable(); - - if (!ret) { - switch (cmp) { - case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; - case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; - case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; - case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; - case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; - case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; - default: ret = -ENOSYS; - } - } - return ret; -} - -static inline int -futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) -{ - int retval; - - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - if (cpu_has_llsc && R10000_LLSC_WAR) { - __asm__ __volatile__( - "# futex_atomic_cmpxchg_inatomic \n" - " .set push \n" - " .set noat \n" - " .set mips3 \n" - "1: ll %0, %2 \n" - " bne %0, %z3, 3f \n" - " .set mips0 \n" - " move $1, %z4 \n" - " .set mips3 \n" - "2: sc $1, %1 \n" - " beqzl $1, 1b \n" - __WEAK_LLSC_MB - "3: \n" - " .set pop \n" - " .section .fixup,\"ax\" \n" - "4: li %0, %5 \n" - " j 3b \n" - " .previous \n" - " .section __ex_table,\"a\" \n" - " "__UA_ADDR "\t1b, 4b \n" - " "__UA_ADDR "\t2b, 4b \n" - " .previous \n" - : "=&r" (retval), "=R" (*uaddr) - : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT) - : "memory"); - } else if (cpu_has_llsc) { - __asm__ __volatile__( - "# futex_atomic_cmpxchg_inatomic \n" - " .set push \n" - " .set noat \n" - " .set mips3 \n" - "1: ll %0, %2 \n" - " bne %0, %z3, 3f \n" - " .set mips0 \n" - " move $1, %z4 \n" - " .set mips3 \n" - "2: sc $1, %1 \n" - " beqz $1, 1b \n" - __WEAK_LLSC_MB - "3: \n" - " .set pop \n" - " .section .fixup,\"ax\" \n" - "4: li %0, %5 \n" - " j 3b \n" - " .previous \n" - " .section __ex_table,\"a\" \n" - " "__UA_ADDR "\t1b, 4b \n" - " "__UA_ADDR "\t2b, 4b \n" - " .previous \n" - : "=&r" (retval), "=R" (*uaddr) - : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT) - : "memory"); - } else - return -ENOSYS; - - return retval; -} - -#endif -#endif /* _ASM_FUTEX_H */ diff --git a/include/asm-mips/fw/arc/hinv.h b/include/asm-mips/fw/arc/hinv.h deleted file mode 100644 index e6ff4add04e2..000000000000 --- a/include/asm-mips/fw/arc/hinv.h +++ /dev/null @@ -1,175 +0,0 @@ -/* - * ARCS hardware/memory inventory/configuration and system ID definitions. - */ -#ifndef _ASM_ARC_HINV_H -#define _ASM_ARC_HINV_H - -#include -#include - -/* configuration query defines */ -typedef enum configclass { - SystemClass, - ProcessorClass, - CacheClass, -#ifndef _NT_PROM - MemoryClass, - AdapterClass, - ControllerClass, - PeripheralClass -#else /* _NT_PROM */ - AdapterClass, - ControllerClass, - PeripheralClass, - MemoryClass -#endif /* _NT_PROM */ -} CONFIGCLASS; - -typedef enum configtype { - ARC, - CPU, - FPU, - PrimaryICache, - PrimaryDCache, - SecondaryICache, - SecondaryDCache, - SecondaryCache, -#ifndef _NT_PROM - Memory, -#endif - EISAAdapter, - TCAdapter, - SCSIAdapter, - DTIAdapter, - MultiFunctionAdapter, - DiskController, - TapeController, - CDROMController, - WORMController, - SerialController, - NetworkController, - DisplayController, - ParallelController, - PointerController, - KeyboardController, - AudioController, - OtherController, - DiskPeripheral, - FloppyDiskPeripheral, - TapePeripheral, - ModemPeripheral, - MonitorPeripheral, - PrinterPeripheral, - PointerPeripheral, - KeyboardPeripheral, - TerminalPeripheral, - LinePeripheral, - NetworkPeripheral, -#ifdef _NT_PROM - Memory, -#endif - OtherPeripheral, - - /* new stuff for IP30 */ - /* added without moving anything */ - /* except ANONYMOUS. */ - - XTalkAdapter, - PCIAdapter, - GIOAdapter, - TPUAdapter, - - Anonymous -} CONFIGTYPE; - -typedef enum { - Failed = 1, - ReadOnly = 2, - Removable = 4, - ConsoleIn = 8, - ConsoleOut = 16, - Input = 32, - Output = 64 -} IDENTIFIERFLAG; - -#ifndef NULL /* for GetChild(NULL); */ -#define NULL 0 -#endif - -union key_u { - struct { -#ifdef _MIPSEB - unsigned char c_bsize; /* block size in lines */ - unsigned char c_lsize; /* line size in bytes/tag */ - unsigned short c_size; /* cache size in 4K pages */ -#else /* _MIPSEL */ - unsigned short c_size; /* cache size in 4K pages */ - unsigned char c_lsize; /* line size in bytes/tag */ - unsigned char c_bsize; /* block size in lines */ -#endif /* _MIPSEL */ - } cache; - ULONG FullKey; -}; - -#if _MIPS_SIM == _MIPS_SIM_ABI64 -#define SGI_ARCS_VERS 64 /* sgi 64-bit version */ -#define SGI_ARCS_REV 0 /* rev .00 */ -#else -#define SGI_ARCS_VERS 1 /* first version */ -#define SGI_ARCS_REV 10 /* rev .10, 3/04/92 */ -#endif - -typedef struct component { - CONFIGCLASS Class; - CONFIGTYPE Type; - IDENTIFIERFLAG Flags; - USHORT Version; - USHORT Revision; - ULONG Key; - ULONG AffinityMask; - ULONG ConfigurationDataSize; - ULONG IdentifierLength; - char *Identifier; -} COMPONENT; - -/* internal structure that holds pathname parsing data */ -struct cfgdata { - char *name; /* full name */ - int minlen; /* minimum length to match */ - CONFIGTYPE type; /* type of token */ -}; - -/* System ID */ -typedef struct systemid { - CHAR VendorId[8]; - CHAR ProductId[8]; -} SYSTEMID; - -/* memory query functions */ -typedef enum memorytype { - ExceptionBlock, - SPBPage, /* ARCS == SystemParameterBlock */ -#ifndef _NT_PROM - FreeContiguous, - FreeMemory, - BadMemory, - LoadedProgram, - FirmwareTemporary, - FirmwarePermanent -#else /* _NT_PROM */ - FreeMemory, - BadMemory, - LoadedProgram, - FirmwareTemporary, - FirmwarePermanent, - FreeContiguous -#endif /* _NT_PROM */ -} MEMORYTYPE; - -typedef struct memorydescriptor { - MEMORYTYPE Type; - LONG BasePage; - LONG PageCount; -} MEMORYDESCRIPTOR; - -#endif /* _ASM_ARC_HINV_H */ diff --git a/include/asm-mips/fw/arc/types.h b/include/asm-mips/fw/arc/types.h deleted file mode 100644 index b9adcd6f0860..000000000000 --- a/include/asm-mips/fw/arc/types.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright 1999 Ralf Baechle (ralf@gnu.org) - * Copyright 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_ARC_TYPES_H -#define _ASM_ARC_TYPES_H - - -#ifdef CONFIG_ARC32 - -typedef char CHAR; -typedef short SHORT; -typedef long LARGE_INTEGER __attribute__ ((__mode__ (__DI__))); -typedef long LONG __attribute__ ((__mode__ (__SI__))); -typedef unsigned char UCHAR; -typedef unsigned short USHORT; -typedef unsigned long ULONG __attribute__ ((__mode__ (__SI__))); -typedef void VOID; - -/* The pointer types. Note that we're using a 64-bit compiler but all - pointer in the ARC structures are only 32-bit, so we need some disgusting - workarounds. Keep your vomit bag handy. */ -typedef LONG _PCHAR; -typedef LONG _PSHORT; -typedef LONG _PLARGE_INTEGER; -typedef LONG _PLONG; -typedef LONG _PUCHAR; -typedef LONG _PUSHORT; -typedef LONG _PULONG; -typedef LONG _PVOID; - -#endif /* CONFIG_ARC32 */ - -#ifdef CONFIG_ARC64 - -typedef char CHAR; -typedef short SHORT; -typedef long LARGE_INTEGER __attribute__ ((__mode__ (__DI__))); -typedef long LONG __attribute__ ((__mode__ (__DI__))); -typedef unsigned char UCHAR; -typedef unsigned short USHORT; -typedef unsigned long ULONG __attribute__ ((__mode__ (__DI__))); -typedef void VOID; - -/* The pointer types. We're 64-bit and the firmware is also 64-bit, so - live is sane ... */ -typedef CHAR *_PCHAR; -typedef SHORT *_PSHORT; -typedef LARGE_INTEGER *_PLARGE_INTEGER; -typedef LONG *_PLONG; -typedef UCHAR *_PUCHAR; -typedef USHORT *_PUSHORT; -typedef ULONG *_PULONG; -typedef VOID *_PVOID; - -#endif /* CONFIG_ARC64 */ - -typedef CHAR *PCHAR; -typedef SHORT *PSHORT; -typedef LARGE_INTEGER *PLARGE_INTEGER; -typedef LONG *PLONG; -typedef UCHAR *PUCHAR; -typedef USHORT *PUSHORT; -typedef ULONG *PULONG; -typedef VOID *PVOID; - -/* - * Return type of ArcGetDisplayStatus() - */ -typedef struct { - USHORT CursorXPosition; - USHORT CursorYPosition; - USHORT CursorMaxXPosition; - USHORT CursorMaxYPosition; - USHORT ForegroundColor; - USHORT BackgroundColor; - UCHAR HighIntensity; - UCHAR Underscored; - UCHAR ReverseVideo; -} DISPLAY_STATUS; - -#endif /* _ASM_ARC_TYPES_H */ diff --git a/include/asm-mips/fw/cfe/cfe_api.h b/include/asm-mips/fw/cfe/cfe_api.h deleted file mode 100644 index 0995575db320..000000000000 --- a/include/asm-mips/fw/cfe/cfe_api.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ -/* - * Broadcom Common Firmware Environment (CFE) - * - * This file contains declarations for doing callbacks to - * cfe from an application. It should be the only header - * needed by the application to use this library - * - * Authors: Mitch Lichtenberg, Chris Demetriou - */ -#ifndef CFE_API_H -#define CFE_API_H - -#include -#include - -typedef long intptr_t; - - -/* - * Constants - */ - -/* Seal indicating CFE's presence, passed to user program. */ -#define CFE_EPTSEAL 0x43464531 - -#define CFE_MI_RESERVED 0 /* memory is reserved, do not use */ -#define CFE_MI_AVAILABLE 1 /* memory is available */ - -#define CFE_FLG_WARMSTART 0x00000001 -#define CFE_FLG_FULL_ARENA 0x00000001 -#define CFE_FLG_ENV_PERMANENT 0x00000001 - -#define CFE_CPU_CMD_START 1 -#define CFE_CPU_CMD_STOP 0 - -#define CFE_STDHANDLE_CONSOLE 0 - -#define CFE_DEV_NETWORK 1 -#define CFE_DEV_DISK 2 -#define CFE_DEV_FLASH 3 -#define CFE_DEV_SERIAL 4 -#define CFE_DEV_CPU 5 -#define CFE_DEV_NVRAM 6 -#define CFE_DEV_CLOCK 7 -#define CFE_DEV_OTHER 8 -#define CFE_DEV_MASK 0x0F - -#define CFE_CACHE_FLUSH_D 1 -#define CFE_CACHE_INVAL_I 2 -#define CFE_CACHE_INVAL_D 4 -#define CFE_CACHE_INVAL_L2 8 - -#define CFE_FWI_64BIT 0x00000001 -#define CFE_FWI_32BIT 0x00000002 -#define CFE_FWI_RELOC 0x00000004 -#define CFE_FWI_UNCACHED 0x00000008 -#define CFE_FWI_MULTICPU 0x00000010 -#define CFE_FWI_FUNCSIM 0x00000020 -#define CFE_FWI_RTLSIM 0x00000040 - -typedef struct { - int64_t fwi_version; /* major, minor, eco version */ - int64_t fwi_totalmem; /* total installed mem */ - int64_t fwi_flags; /* various flags */ - int64_t fwi_boardid; /* board ID */ - int64_t fwi_bootarea_va; /* VA of boot area */ - int64_t fwi_bootarea_pa; /* PA of boot area */ - int64_t fwi_bootarea_size; /* size of boot area */ -} cfe_fwinfo_t; - - -/* - * Defines and prototypes for functions which take no arguments. - */ -int64_t cfe_getticks(void); - -/* - * Defines and prototypes for the rest of the functions. - */ -int cfe_close(int handle); -int cfe_cpu_start(int cpu, void (*fn) (void), long sp, long gp, long a1); -int cfe_cpu_stop(int cpu); -int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen); -int cfe_enummem(int idx, int flags, uint64_t * start, uint64_t * length, - uint64_t * type); -int cfe_exit(int warm, int status); -int cfe_flushcache(int flg); -int cfe_getdevinfo(char *name); -int cfe_getenv(char *name, char *dest, int destlen); -int cfe_getfwinfo(cfe_fwinfo_t * info); -int cfe_getstdhandle(int flg); -int cfe_init(uint64_t handle, uint64_t ept); -int cfe_inpstat(int handle); -int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer, - int length, int *retlen, uint64_t offset); -int cfe_open(char *name); -int cfe_read(int handle, unsigned char *buffer, int length); -int cfe_readblk(int handle, int64_t offset, unsigned char *buffer, - int length); -int cfe_setenv(char *name, char *val); -int cfe_write(int handle, unsigned char *buffer, int length); -int cfe_writeblk(int handle, int64_t offset, unsigned char *buffer, - int length); - -#endif /* CFE_API_H */ diff --git a/include/asm-mips/fw/cfe/cfe_error.h b/include/asm-mips/fw/cfe/cfe_error.h deleted file mode 100644 index b80374636279..000000000000 --- a/include/asm-mips/fw/cfe/cfe_error.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - * Broadcom Common Firmware Environment (CFE) - * - * CFE's global error code list is here. - * - * Author: Mitch Lichtenberg - */ - -#define CFE_OK 0 -#define CFE_ERR -1 /* generic error */ -#define CFE_ERR_INV_COMMAND -2 -#define CFE_ERR_EOF -3 -#define CFE_ERR_IOERR -4 -#define CFE_ERR_NOMEM -5 -#define CFE_ERR_DEVNOTFOUND -6 -#define CFE_ERR_DEVOPEN -7 -#define CFE_ERR_INV_PARAM -8 -#define CFE_ERR_ENVNOTFOUND -9 -#define CFE_ERR_ENVREADONLY -10 - -#define CFE_ERR_NOTELF -11 -#define CFE_ERR_NOT32BIT -12 -#define CFE_ERR_WRONGENDIAN -13 -#define CFE_ERR_BADELFVERS -14 -#define CFE_ERR_NOTMIPS -15 -#define CFE_ERR_BADELFFMT -16 -#define CFE_ERR_BADADDR -17 - -#define CFE_ERR_FILENOTFOUND -18 -#define CFE_ERR_UNSUPPORTED -19 - -#define CFE_ERR_HOSTUNKNOWN -20 - -#define CFE_ERR_TIMEOUT -21 - -#define CFE_ERR_PROTOCOLERR -22 - -#define CFE_ERR_NETDOWN -23 -#define CFE_ERR_NONAMESERVER -24 - -#define CFE_ERR_NOHANDLES -25 -#define CFE_ERR_ALREADYBOUND -26 - -#define CFE_ERR_CANNOTSET -27 -#define CFE_ERR_NOMORE -28 -#define CFE_ERR_BADFILESYS -29 -#define CFE_ERR_FSNOTAVAIL -30 - -#define CFE_ERR_INVBOOTBLOCK -31 -#define CFE_ERR_WRONGDEVTYPE -32 -#define CFE_ERR_BBCHECKSUM -33 -#define CFE_ERR_BOOTPROGCHKSUM -34 - -#define CFE_ERR_LDRNOTAVAIL -35 - -#define CFE_ERR_NOTREADY -36 - -#define CFE_ERR_GETMEM -37 -#define CFE_ERR_SETMEM -38 - -#define CFE_ERR_NOTCONN -39 -#define CFE_ERR_ADDRINUSE -40 diff --git a/include/asm-mips/gcmpregs.h b/include/asm-mips/gcmpregs.h deleted file mode 100644 index d74a8a4ca861..000000000000 --- a/include/asm-mips/gcmpregs.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000, 07 MIPS Technologies, Inc. - * - * Multiprocessor Subsystem Register Definitions - * - */ -#ifndef _ASM_GCMPREGS_H -#define _ASM_GCMPREGS_H - - -/* Offsets to major blocks within GCMP from GCMP base */ -#define GCMP_GCB_OFS 0x0000 /* Global Control Block */ -#define GCMP_CLCB_OFS 0x2000 /* Core Local Control Block */ -#define GCMP_COCB_OFS 0x4000 /* Core Other Control Block */ -#define GCMP_GDB_OFS 0x8000 /* Global Debug Block */ - -/* Offsets to individual GCMP registers from GCMP base */ -#define GCMPOFS(block, tag, reg) (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS) - -#define GCMPGCBOFS(reg) GCMPOFS(GCB, GCB, reg) -#define GCMPCLCBOFS(reg) GCMPOFS(CLCB, CCB, reg) -#define GCMPCOCBOFS(reg) GCMPOFS(COCB, CCB, reg) -#define GCMPGDBOFS(reg) GCMPOFS(GDB, GDB, reg) - -/* GCMP register access */ -#define GCMPGCB(reg) REGP(_gcmp_base, GCMPGCBOFS(reg)) -#define GCMPCLCB(reg) REGP(_gcmp_base, GCMPCLCBOFS(reg)) -#define GCMPCOCB(reg) REGP(_gcmp_base, GCMPCOCBOFS(reg)) -#define GCMPGDB(reg) REGP(_gcmp_base, GCMPGDBOFS(reg)) - -/* Mask generation */ -#define GCMPMSK(block, reg, bits) (MSK(bits)< - -#endif /* __ASM_MIPS_GPIO_H */ diff --git a/include/asm-mips/gt64120.h b/include/asm-mips/gt64120.h deleted file mode 100644 index e64b41093c49..000000000000 --- a/include/asm-mips/gt64120.h +++ /dev/null @@ -1,580 +0,0 @@ -/* - * Copyright (C) 2000, 2004, 2005 MIPS Technologies, Inc. - * All rights reserved. - * Authors: Carsten Langgaard - * Maciej W. Rozycki - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#ifndef _ASM_GT64120_H -#define _ASM_GT64120_H - -#include - -#include -#include - -#define MSK(n) ((1 << (n)) - 1) - -/* - * Register offset addresses - */ -/* CPU Configuration. */ -#define GT_CPU_OFS 0x000 - -#define GT_MULTI_OFS 0x120 - -/* CPU Address Decode. */ -#define GT_SCS10LD_OFS 0x008 -#define GT_SCS10HD_OFS 0x010 -#define GT_SCS32LD_OFS 0x018 -#define GT_SCS32HD_OFS 0x020 -#define GT_CS20LD_OFS 0x028 -#define GT_CS20HD_OFS 0x030 -#define GT_CS3BOOTLD_OFS 0x038 -#define GT_CS3BOOTHD_OFS 0x040 -#define GT_PCI0IOLD_OFS 0x048 -#define GT_PCI0IOHD_OFS 0x050 -#define GT_PCI0M0LD_OFS 0x058 -#define GT_PCI0M0HD_OFS 0x060 -#define GT_ISD_OFS 0x068 - -#define GT_PCI0M1LD_OFS 0x080 -#define GT_PCI0M1HD_OFS 0x088 -#define GT_PCI1IOLD_OFS 0x090 -#define GT_PCI1IOHD_OFS 0x098 -#define GT_PCI1M0LD_OFS 0x0a0 -#define GT_PCI1M0HD_OFS 0x0a8 -#define GT_PCI1M1LD_OFS 0x0b0 -#define GT_PCI1M1HD_OFS 0x0b8 -#define GT_PCI1M1LD_OFS 0x0b0 -#define GT_PCI1M1HD_OFS 0x0b8 - -#define GT_SCS10AR_OFS 0x0d0 -#define GT_SCS32AR_OFS 0x0d8 -#define GT_CS20R_OFS 0x0e0 -#define GT_CS3BOOTR_OFS 0x0e8 - -#define GT_PCI0IOREMAP_OFS 0x0f0 -#define GT_PCI0M0REMAP_OFS 0x0f8 -#define GT_PCI0M1REMAP_OFS 0x100 -#define GT_PCI1IOREMAP_OFS 0x108 -#define GT_PCI1M0REMAP_OFS 0x110 -#define GT_PCI1M1REMAP_OFS 0x118 - -/* CPU Error Report. */ -#define GT_CPUERR_ADDRLO_OFS 0x070 -#define GT_CPUERR_ADDRHI_OFS 0x078 - -#define GT_CPUERR_DATALO_OFS 0x128 /* GT-64120A only */ -#define GT_CPUERR_DATAHI_OFS 0x130 /* GT-64120A only */ -#define GT_CPUERR_PARITY_OFS 0x138 /* GT-64120A only */ - -/* CPU Sync Barrier. */ -#define GT_PCI0SYNC_OFS 0x0c0 -#define GT_PCI1SYNC_OFS 0x0c8 - -/* SDRAM and Device Address Decode. */ -#define GT_SCS0LD_OFS 0x400 -#define GT_SCS0HD_OFS 0x404 -#define GT_SCS1LD_OFS 0x408 -#define GT_SCS1HD_OFS 0x40c -#define GT_SCS2LD_OFS 0x410 -#define GT_SCS2HD_OFS 0x414 -#define GT_SCS3LD_OFS 0x418 -#define GT_SCS3HD_OFS 0x41c -#define GT_CS0LD_OFS 0x420 -#define GT_CS0HD_OFS 0x424 -#define GT_CS1LD_OFS 0x428 -#define GT_CS1HD_OFS 0x42c -#define GT_CS2LD_OFS 0x430 -#define GT_CS2HD_OFS 0x434 -#define GT_CS3LD_OFS 0x438 -#define GT_CS3HD_OFS 0x43c -#define GT_BOOTLD_OFS 0x440 -#define GT_BOOTHD_OFS 0x444 - -#define GT_ADERR_OFS 0x470 - -/* SDRAM Configuration. */ -#define GT_SDRAM_CFG_OFS 0x448 - -#define GT_SDRAM_OPMODE_OFS 0x474 -#define GT_SDRAM_BM_OFS 0x478 -#define GT_SDRAM_ADDRDECODE_OFS 0x47c - -/* SDRAM Parameters. */ -#define GT_SDRAM_B0_OFS 0x44c -#define GT_SDRAM_B1_OFS 0x450 -#define GT_SDRAM_B2_OFS 0x454 -#define GT_SDRAM_B3_OFS 0x458 - -/* Device Parameters. */ -#define GT_DEV_B0_OFS 0x45c -#define GT_DEV_B1_OFS 0x460 -#define GT_DEV_B2_OFS 0x464 -#define GT_DEV_B3_OFS 0x468 -#define GT_DEV_BOOT_OFS 0x46c - -/* ECC. */ -#define GT_ECC_ERRDATALO 0x480 /* GT-64120A only */ -#define GT_ECC_ERRDATAHI 0x484 /* GT-64120A only */ -#define GT_ECC_MEM 0x488 /* GT-64120A only */ -#define GT_ECC_CALC 0x48c /* GT-64120A only */ -#define GT_ECC_ERRADDR 0x490 /* GT-64120A only */ - -/* DMA Record. */ -#define GT_DMA0_CNT_OFS 0x800 -#define GT_DMA1_CNT_OFS 0x804 -#define GT_DMA2_CNT_OFS 0x808 -#define GT_DMA3_CNT_OFS 0x80c -#define GT_DMA0_SA_OFS 0x810 -#define GT_DMA1_SA_OFS 0x814 -#define GT_DMA2_SA_OFS 0x818 -#define GT_DMA3_SA_OFS 0x81c -#define GT_DMA0_DA_OFS 0x820 -#define GT_DMA1_DA_OFS 0x824 -#define GT_DMA2_DA_OFS 0x828 -#define GT_DMA3_DA_OFS 0x82c -#define GT_DMA0_NEXT_OFS 0x830 -#define GT_DMA1_NEXT_OFS 0x834 -#define GT_DMA2_NEXT_OFS 0x838 -#define GT_DMA3_NEXT_OFS 0x83c - -#define GT_DMA0_CUR_OFS 0x870 -#define GT_DMA1_CUR_OFS 0x874 -#define GT_DMA2_CUR_OFS 0x878 -#define GT_DMA3_CUR_OFS 0x87c - -/* DMA Channel Control. */ -#define GT_DMA0_CTRL_OFS 0x840 -#define GT_DMA1_CTRL_OFS 0x844 -#define GT_DMA2_CTRL_OFS 0x848 -#define GT_DMA3_CTRL_OFS 0x84c - -/* DMA Arbiter. */ -#define GT_DMA_ARB_OFS 0x860 - -/* Timer/Counter. */ -#define GT_TC0_OFS 0x850 -#define GT_TC1_OFS 0x854 -#define GT_TC2_OFS 0x858 -#define GT_TC3_OFS 0x85c - -#define GT_TC_CONTROL_OFS 0x864 - -/* PCI Internal. */ -#define GT_PCI0_CMD_OFS 0xc00 -#define GT_PCI0_TOR_OFS 0xc04 -#define GT_PCI0_BS_SCS10_OFS 0xc08 -#define GT_PCI0_BS_SCS32_OFS 0xc0c -#define GT_PCI0_BS_CS20_OFS 0xc10 -#define GT_PCI0_BS_CS3BT_OFS 0xc14 - -#define GT_PCI1_IACK_OFS 0xc30 -#define GT_PCI0_IACK_OFS 0xc34 - -#define GT_PCI0_BARE_OFS 0xc3c -#define GT_PCI0_PREFMBR_OFS 0xc40 - -#define GT_PCI0_SCS10_BAR_OFS 0xc48 -#define GT_PCI0_SCS32_BAR_OFS 0xc4c -#define GT_PCI0_CS20_BAR_OFS 0xc50 -#define GT_PCI0_CS3BT_BAR_OFS 0xc54 -#define GT_PCI0_SSCS10_BAR_OFS 0xc58 -#define GT_PCI0_SSCS32_BAR_OFS 0xc5c - -#define GT_PCI0_SCS3BT_BAR_OFS 0xc64 - -#define GT_PCI1_CMD_OFS 0xc80 -#define GT_PCI1_TOR_OFS 0xc84 -#define GT_PCI1_BS_SCS10_OFS 0xc88 -#define GT_PCI1_BS_SCS32_OFS 0xc8c -#define GT_PCI1_BS_CS20_OFS 0xc90 -#define GT_PCI1_BS_CS3BT_OFS 0xc94 - -#define GT_PCI1_BARE_OFS 0xcbc -#define GT_PCI1_PREFMBR_OFS 0xcc0 - -#define GT_PCI1_SCS10_BAR_OFS 0xcc8 -#define GT_PCI1_SCS32_BAR_OFS 0xccc -#define GT_PCI1_CS20_BAR_OFS 0xcd0 -#define GT_PCI1_CS3BT_BAR_OFS 0xcd4 -#define GT_PCI1_SSCS10_BAR_OFS 0xcd8 -#define GT_PCI1_SSCS32_BAR_OFS 0xcdc - -#define GT_PCI1_SCS3BT_BAR_OFS 0xce4 - -#define GT_PCI1_CFGADDR_OFS 0xcf0 -#define GT_PCI1_CFGDATA_OFS 0xcf4 -#define GT_PCI0_CFGADDR_OFS 0xcf8 -#define GT_PCI0_CFGDATA_OFS 0xcfc - -/* Interrupts. */ -#define GT_INTRCAUSE_OFS 0xc18 -#define GT_INTRMASK_OFS 0xc1c - -#define GT_PCI0_ICMASK_OFS 0xc24 -#define GT_PCI0_SERR0MASK_OFS 0xc28 - -#define GT_CPU_INTSEL_OFS 0xc70 -#define GT_PCI0_INTSEL_OFS 0xc74 - -#define GT_HINTRCAUSE_OFS 0xc98 -#define GT_HINTRMASK_OFS 0xc9c - -#define GT_PCI0_HICMASK_OFS 0xca4 -#define GT_PCI1_SERR1MASK_OFS 0xca8 - - -/* - * I2O Support Registers - */ -#define INBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x010 -#define INBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x014 -#define OUTBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x018 -#define OUTBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x01c -#define INBOUND_DOORBELL_REGISTER_PCI_SIDE 0x020 -#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x024 -#define INBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x028 -#define OUTBOUND_DOORBELL_REGISTER_PCI_SIDE 0x02c -#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x030 -#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x034 -#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x040 -#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x044 -#define QUEUE_CONTROL_REGISTER_PCI_SIDE 0x050 -#define QUEUE_BASE_ADDRESS_REGISTER_PCI_SIDE 0x054 -#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x060 -#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x064 -#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x068 -#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x06c -#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x070 -#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x074 -#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x078 -#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x07c - -#define INBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1c10 -#define INBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1c14 -#define OUTBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1c18 -#define OUTBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1c1c -#define INBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1c20 -#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1c24 -#define INBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1c28 -#define OUTBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1c2c -#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1c30 -#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1c34 -#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1c40 -#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1c44 -#define QUEUE_CONTROL_REGISTER_CPU_SIDE 0x1c50 -#define QUEUE_BASE_ADDRESS_REGISTER_CPU_SIDE 0x1c54 -#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c60 -#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c64 -#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c68 -#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c6c -#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c70 -#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c74 -#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c78 -#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c7c - -/* - * Register encodings - */ -#define GT_CPU_ENDIAN_SHF 12 -#define GT_CPU_ENDIAN_MSK (MSK(1) << GT_CPU_ENDIAN_SHF) -#define GT_CPU_ENDIAN_BIT GT_CPU_ENDIAN_MSK -#define GT_CPU_WR_SHF 16 -#define GT_CPU_WR_MSK (MSK(1) << GT_CPU_WR_SHF) -#define GT_CPU_WR_BIT GT_CPU_WR_MSK -#define GT_CPU_WR_DXDXDXDX 0 -#define GT_CPU_WR_DDDD 1 - - -#define GT_PCI_DCRM_SHF 21 -#define GT_PCI_LD_SHF 0 -#define GT_PCI_LD_MSK (MSK(15) << GT_PCI_LD_SHF) -#define GT_PCI_HD_SHF 0 -#define GT_PCI_HD_MSK (MSK(7) << GT_PCI_HD_SHF) -#define GT_PCI_REMAP_SHF 0 -#define GT_PCI_REMAP_MSK (MSK(11) << GT_PCI_REMAP_SHF) - - -#define GT_CFGADDR_CFGEN_SHF 31 -#define GT_CFGADDR_CFGEN_MSK (MSK(1) << GT_CFGADDR_CFGEN_SHF) -#define GT_CFGADDR_CFGEN_BIT GT_CFGADDR_CFGEN_MSK - -#define GT_CFGADDR_BUSNUM_SHF 16 -#define GT_CFGADDR_BUSNUM_MSK (MSK(8) << GT_CFGADDR_BUSNUM_SHF) - -#define GT_CFGADDR_DEVNUM_SHF 11 -#define GT_CFGADDR_DEVNUM_MSK (MSK(5) << GT_CFGADDR_DEVNUM_SHF) - -#define GT_CFGADDR_FUNCNUM_SHF 8 -#define GT_CFGADDR_FUNCNUM_MSK (MSK(3) << GT_CFGADDR_FUNCNUM_SHF) - -#define GT_CFGADDR_REGNUM_SHF 2 -#define GT_CFGADDR_REGNUM_MSK (MSK(6) << GT_CFGADDR_REGNUM_SHF) - - -#define GT_SDRAM_BM_ORDER_SHF 2 -#define GT_SDRAM_BM_ORDER_MSK (MSK(1) << GT_SDRAM_BM_ORDER_SHF) -#define GT_SDRAM_BM_ORDER_BIT GT_SDRAM_BM_ORDER_MSK -#define GT_SDRAM_BM_ORDER_SUB 1 -#define GT_SDRAM_BM_ORDER_LIN 0 - -#define GT_SDRAM_BM_RSVD_ALL1 0xffb - - -#define GT_SDRAM_ADDRDECODE_ADDR_SHF 0 -#define GT_SDRAM_ADDRDECODE_ADDR_MSK (MSK(3) << GT_SDRAM_ADDRDECODE_ADDR_SHF) -#define GT_SDRAM_ADDRDECODE_ADDR_0 0 -#define GT_SDRAM_ADDRDECODE_ADDR_1 1 -#define GT_SDRAM_ADDRDECODE_ADDR_2 2 -#define GT_SDRAM_ADDRDECODE_ADDR_3 3 -#define GT_SDRAM_ADDRDECODE_ADDR_4 4 -#define GT_SDRAM_ADDRDECODE_ADDR_5 5 -#define GT_SDRAM_ADDRDECODE_ADDR_6 6 -#define GT_SDRAM_ADDRDECODE_ADDR_7 7 - - -#define GT_SDRAM_B0_CASLAT_SHF 0 -#define GT_SDRAM_B0_CASLAT_MSK (MSK(2) << GT_SDRAM_B0__SHF) -#define GT_SDRAM_B0_CASLAT_2 1 -#define GT_SDRAM_B0_CASLAT_3 2 - -#define GT_SDRAM_B0_FTDIS_SHF 2 -#define GT_SDRAM_B0_FTDIS_MSK (MSK(1) << GT_SDRAM_B0_FTDIS_SHF) -#define GT_SDRAM_B0_FTDIS_BIT GT_SDRAM_B0_FTDIS_MSK - -#define GT_SDRAM_B0_SRASPRCHG_SHF 3 -#define GT_SDRAM_B0_SRASPRCHG_MSK (MSK(1) << GT_SDRAM_B0_SRASPRCHG_SHF) -#define GT_SDRAM_B0_SRASPRCHG_BIT GT_SDRAM_B0_SRASPRCHG_MSK -#define GT_SDRAM_B0_SRASPRCHG_2 0 -#define GT_SDRAM_B0_SRASPRCHG_3 1 - -#define GT_SDRAM_B0_B0COMPAB_SHF 4 -#define GT_SDRAM_B0_B0COMPAB_MSK (MSK(1) << GT_SDRAM_B0_B0COMPAB_SHF) -#define GT_SDRAM_B0_B0COMPAB_BIT GT_SDRAM_B0_B0COMPAB_MSK - -#define GT_SDRAM_B0_64BITINT_SHF 5 -#define GT_SDRAM_B0_64BITINT_MSK (MSK(1) << GT_SDRAM_B0_64BITINT_SHF) -#define GT_SDRAM_B0_64BITINT_BIT GT_SDRAM_B0_64BITINT_MSK -#define GT_SDRAM_B0_64BITINT_2 0 -#define GT_SDRAM_B0_64BITINT_4 1 - -#define GT_SDRAM_B0_BW_SHF 6 -#define GT_SDRAM_B0_BW_MSK (MSK(1) << GT_SDRAM_B0_BW_SHF) -#define GT_SDRAM_B0_BW_BIT GT_SDRAM_B0_BW_MSK -#define GT_SDRAM_B0_BW_32 0 -#define GT_SDRAM_B0_BW_64 1 - -#define GT_SDRAM_B0_BLODD_SHF 7 -#define GT_SDRAM_B0_BLODD_MSK (MSK(1) << GT_SDRAM_B0_BLODD_SHF) -#define GT_SDRAM_B0_BLODD_BIT GT_SDRAM_B0_BLODD_MSK - -#define GT_SDRAM_B0_PAR_SHF 8 -#define GT_SDRAM_B0_PAR_MSK (MSK(1) << GT_SDRAM_B0_PAR_SHF) -#define GT_SDRAM_B0_PAR_BIT GT_SDRAM_B0_PAR_MSK - -#define GT_SDRAM_B0_BYPASS_SHF 9 -#define GT_SDRAM_B0_BYPASS_MSK (MSK(1) << GT_SDRAM_B0_BYPASS_SHF) -#define GT_SDRAM_B0_BYPASS_BIT GT_SDRAM_B0_BYPASS_MSK - -#define GT_SDRAM_B0_SRAS2SCAS_SHF 10 -#define GT_SDRAM_B0_SRAS2SCAS_MSK (MSK(1) << GT_SDRAM_B0_SRAS2SCAS_SHF) -#define GT_SDRAM_B0_SRAS2SCAS_BIT GT_SDRAM_B0_SRAS2SCAS_MSK -#define GT_SDRAM_B0_SRAS2SCAS_2 0 -#define GT_SDRAM_B0_SRAS2SCAS_3 1 - -#define GT_SDRAM_B0_SIZE_SHF 11 -#define GT_SDRAM_B0_SIZE_MSK (MSK(1) << GT_SDRAM_B0_SIZE_SHF) -#define GT_SDRAM_B0_SIZE_BIT GT_SDRAM_B0_SIZE_MSK -#define GT_SDRAM_B0_SIZE_16M 0 -#define GT_SDRAM_B0_SIZE_64M 1 - -#define GT_SDRAM_B0_EXTPAR_SHF 12 -#define GT_SDRAM_B0_EXTPAR_MSK (MSK(1) << GT_SDRAM_B0_EXTPAR_SHF) -#define GT_SDRAM_B0_EXTPAR_BIT GT_SDRAM_B0_EXTPAR_MSK - -#define GT_SDRAM_B0_BLEN_SHF 13 -#define GT_SDRAM_B0_BLEN_MSK (MSK(1) << GT_SDRAM_B0_BLEN_SHF) -#define GT_SDRAM_B0_BLEN_BIT GT_SDRAM_B0_BLEN_MSK -#define GT_SDRAM_B0_BLEN_8 0 -#define GT_SDRAM_B0_BLEN_4 1 - - -#define GT_SDRAM_CFG_REFINT_SHF 0 -#define GT_SDRAM_CFG_REFINT_MSK (MSK(14) << GT_SDRAM_CFG_REFINT_SHF) - -#define GT_SDRAM_CFG_NINTERLEAVE_SHF 14 -#define GT_SDRAM_CFG_NINTERLEAVE_MSK (MSK(1) << GT_SDRAM_CFG_NINTERLEAVE_SHF) -#define GT_SDRAM_CFG_NINTERLEAVE_BIT GT_SDRAM_CFG_NINTERLEAVE_MSK - -#define GT_SDRAM_CFG_RMW_SHF 15 -#define GT_SDRAM_CFG_RMW_MSK (MSK(1) << GT_SDRAM_CFG_RMW_SHF) -#define GT_SDRAM_CFG_RMW_BIT GT_SDRAM_CFG_RMW_MSK - -#define GT_SDRAM_CFG_NONSTAGREF_SHF 16 -#define GT_SDRAM_CFG_NONSTAGREF_MSK (MSK(1) << GT_SDRAM_CFG_NONSTAGREF_SHF) -#define GT_SDRAM_CFG_NONSTAGREF_BIT GT_SDRAM_CFG_NONSTAGREF_MSK - -#define GT_SDRAM_CFG_DUPCNTL_SHF 19 -#define GT_SDRAM_CFG_DUPCNTL_MSK (MSK(1) << GT_SDRAM_CFG_DUPCNTL_SHF) -#define GT_SDRAM_CFG_DUPCNTL_BIT GT_SDRAM_CFG_DUPCNTL_MSK - -#define GT_SDRAM_CFG_DUPBA_SHF 20 -#define GT_SDRAM_CFG_DUPBA_MSK (MSK(1) << GT_SDRAM_CFG_DUPBA_SHF) -#define GT_SDRAM_CFG_DUPBA_BIT GT_SDRAM_CFG_DUPBA_MSK - -#define GT_SDRAM_CFG_DUPEOT0_SHF 21 -#define GT_SDRAM_CFG_DUPEOT0_MSK (MSK(1) << GT_SDRAM_CFG_DUPEOT0_SHF) -#define GT_SDRAM_CFG_DUPEOT0_BIT GT_SDRAM_CFG_DUPEOT0_MSK - -#define GT_SDRAM_CFG_DUPEOT1_SHF 22 -#define GT_SDRAM_CFG_DUPEOT1_MSK (MSK(1) << GT_SDRAM_CFG_DUPEOT1_SHF) -#define GT_SDRAM_CFG_DUPEOT1_BIT GT_SDRAM_CFG_DUPEOT1_MSK - -#define GT_SDRAM_OPMODE_OP_SHF 0 -#define GT_SDRAM_OPMODE_OP_MSK (MSK(3) << GT_SDRAM_OPMODE_OP_SHF) -#define GT_SDRAM_OPMODE_OP_NORMAL 0 -#define GT_SDRAM_OPMODE_OP_NOP 1 -#define GT_SDRAM_OPMODE_OP_PRCHG 2 -#define GT_SDRAM_OPMODE_OP_MODE 3 -#define GT_SDRAM_OPMODE_OP_CBR 4 - -#define GT_TC_CONTROL_ENTC0_SHF 0 -#define GT_TC_CONTROL_ENTC0_MSK (MSK(1) << GT_TC_CONTROL_ENTC0_SHF) -#define GT_TC_CONTROL_ENTC0_BIT GT_TC_CONTROL_ENTC0_MSK -#define GT_TC_CONTROL_SELTC0_SHF 1 -#define GT_TC_CONTROL_SELTC0_MSK (MSK(1) << GT_TC_CONTROL_SELTC0_SHF) -#define GT_TC_CONTROL_SELTC0_BIT GT_TC_CONTROL_SELTC0_MSK - - -#define GT_PCI0_BARE_SWSCS3BOOTDIS_SHF 0 -#define GT_PCI0_BARE_SWSCS3BOOTDIS_MSK (MSK(1) << GT_PCI0_BARE_SWSCS3BOOTDIS_SHF) -#define GT_PCI0_BARE_SWSCS3BOOTDIS_BIT GT_PCI0_BARE_SWSCS3BOOTDIS_MSK - -#define GT_PCI0_BARE_SWSCS32DIS_SHF 1 -#define GT_PCI0_BARE_SWSCS32DIS_MSK (MSK(1) << GT_PCI0_BARE_SWSCS32DIS_SHF) -#define GT_PCI0_BARE_SWSCS32DIS_BIT GT_PCI0_BARE_SWSCS32DIS_MSK - -#define GT_PCI0_BARE_SWSCS10DIS_SHF 2 -#define GT_PCI0_BARE_SWSCS10DIS_MSK (MSK(1) << GT_PCI0_BARE_SWSCS10DIS_SHF) -#define GT_PCI0_BARE_SWSCS10DIS_BIT GT_PCI0_BARE_SWSCS10DIS_MSK - -#define GT_PCI0_BARE_INTIODIS_SHF 3 -#define GT_PCI0_BARE_INTIODIS_MSK (MSK(1) << GT_PCI0_BARE_INTIODIS_SHF) -#define GT_PCI0_BARE_INTIODIS_BIT GT_PCI0_BARE_INTIODIS_MSK - -#define GT_PCI0_BARE_INTMEMDIS_SHF 4 -#define GT_PCI0_BARE_INTMEMDIS_MSK (MSK(1) << GT_PCI0_BARE_INTMEMDIS_SHF) -#define GT_PCI0_BARE_INTMEMDIS_BIT GT_PCI0_BARE_INTMEMDIS_MSK - -#define GT_PCI0_BARE_CS3BOOTDIS_SHF 5 -#define GT_PCI0_BARE_CS3BOOTDIS_MSK (MSK(1) << GT_PCI0_BARE_CS3BOOTDIS_SHF) -#define GT_PCI0_BARE_CS3BOOTDIS_BIT GT_PCI0_BARE_CS3BOOTDIS_MSK - -#define GT_PCI0_BARE_CS20DIS_SHF 6 -#define GT_PCI0_BARE_CS20DIS_MSK (MSK(1) << GT_PCI0_BARE_CS20DIS_SHF) -#define GT_PCI0_BARE_CS20DIS_BIT GT_PCI0_BARE_CS20DIS_MSK - -#define GT_PCI0_BARE_SCS32DIS_SHF 7 -#define GT_PCI0_BARE_SCS32DIS_MSK (MSK(1) << GT_PCI0_BARE_SCS32DIS_SHF) -#define GT_PCI0_BARE_SCS32DIS_BIT GT_PCI0_BARE_SCS32DIS_MSK - -#define GT_PCI0_BARE_SCS10DIS_SHF 8 -#define GT_PCI0_BARE_SCS10DIS_MSK (MSK(1) << GT_PCI0_BARE_SCS10DIS_SHF) -#define GT_PCI0_BARE_SCS10DIS_BIT GT_PCI0_BARE_SCS10DIS_MSK - - -#define GT_INTRCAUSE_MASABORT0_SHF 18 -#define GT_INTRCAUSE_MASABORT0_MSK (MSK(1) << GT_INTRCAUSE_MASABORT0_SHF) -#define GT_INTRCAUSE_MASABORT0_BIT GT_INTRCAUSE_MASABORT0_MSK - -#define GT_INTRCAUSE_TARABORT0_SHF 19 -#define GT_INTRCAUSE_TARABORT0_MSK (MSK(1) << GT_INTRCAUSE_TARABORT0_SHF) -#define GT_INTRCAUSE_TARABORT0_BIT GT_INTRCAUSE_TARABORT0_MSK - - -#define GT_PCI0_CFGADDR_REGNUM_SHF 2 -#define GT_PCI0_CFGADDR_REGNUM_MSK (MSK(6) << GT_PCI0_CFGADDR_REGNUM_SHF) -#define GT_PCI0_CFGADDR_FUNCTNUM_SHF 8 -#define GT_PCI0_CFGADDR_FUNCTNUM_MSK (MSK(3) << GT_PCI0_CFGADDR_FUNCTNUM_SHF) -#define GT_PCI0_CFGADDR_DEVNUM_SHF 11 -#define GT_PCI0_CFGADDR_DEVNUM_MSK (MSK(5) << GT_PCI0_CFGADDR_DEVNUM_SHF) -#define GT_PCI0_CFGADDR_BUSNUM_SHF 16 -#define GT_PCI0_CFGADDR_BUSNUM_MSK (MSK(8) << GT_PCI0_CFGADDR_BUSNUM_SHF) -#define GT_PCI0_CFGADDR_CONFIGEN_SHF 31 -#define GT_PCI0_CFGADDR_CONFIGEN_MSK (MSK(1) << GT_PCI0_CFGADDR_CONFIGEN_SHF) -#define GT_PCI0_CFGADDR_CONFIGEN_BIT GT_PCI0_CFGADDR_CONFIGEN_MSK - -#define GT_PCI0_CMD_MBYTESWAP_SHF 0 -#define GT_PCI0_CMD_MBYTESWAP_MSK (MSK(1) << GT_PCI0_CMD_MBYTESWAP_SHF) -#define GT_PCI0_CMD_MBYTESWAP_BIT GT_PCI0_CMD_MBYTESWAP_MSK -#define GT_PCI0_CMD_MWORDSWAP_SHF 10 -#define GT_PCI0_CMD_MWORDSWAP_MSK (MSK(1) << GT_PCI0_CMD_MWORDSWAP_SHF) -#define GT_PCI0_CMD_MWORDSWAP_BIT GT_PCI0_CMD_MWORDSWAP_MSK -#define GT_PCI0_CMD_SBYTESWAP_SHF 16 -#define GT_PCI0_CMD_SBYTESWAP_MSK (MSK(1) << GT_PCI0_CMD_SBYTESWAP_SHF) -#define GT_PCI0_CMD_SBYTESWAP_BIT GT_PCI0_CMD_SBYTESWAP_MSK -#define GT_PCI0_CMD_SWORDSWAP_SHF 11 -#define GT_PCI0_CMD_SWORDSWAP_MSK (MSK(1) << GT_PCI0_CMD_SWORDSWAP_SHF) -#define GT_PCI0_CMD_SWORDSWAP_BIT GT_PCI0_CMD_SWORDSWAP_MSK - -#define GT_INTR_T0EXP_SHF 8 -#define GT_INTR_T0EXP_MSK (MSK(1) << GT_INTR_T0EXP_SHF) -#define GT_INTR_T0EXP_BIT GT_INTR_T0EXP_MSK -#define GT_INTR_RETRYCTR0_SHF 20 -#define GT_INTR_RETRYCTR0_MSK (MSK(1) << GT_INTR_RETRYCTR0_SHF) -#define GT_INTR_RETRYCTR0_BIT GT_INTR_RETRYCTR0_MSK - -/* - * Misc - */ -#define GT_DEF_PCI0_IO_BASE 0x10000000UL -#define GT_DEF_PCI0_IO_SIZE 0x02000000UL -#define GT_DEF_PCI0_MEM0_BASE 0x12000000UL -#define GT_DEF_PCI0_MEM0_SIZE 0x02000000UL -#define GT_DEF_BASE 0x14000000UL - -#define GT_MAX_BANKSIZE (256 * 1024 * 1024) /* Max 256MB bank */ -#define GT_LATTIM_MIN 6 /* Minimum lat */ - -/* - * The gt64120_dep.h file must define the following macros - * - * GT_READ(ofs, data_pointer) - * GT_WRITE(ofs, data) - read/write GT64120 registers in 32bit - * - * TIMER - gt64120 timer irq, temporary solution until - * full gt64120 cascade interrupt support is in place - */ - -#include - -/* - * Because of an error/peculiarity in the Galileo chip, we need to swap the - * bytes when running bigendian. We also provide non-swapping versions. - */ -#define __GT_READ(ofs) \ - (*(volatile u32 *)(GT64120_BASE+(ofs))) -#define __GT_WRITE(ofs, data) \ - do { *(volatile u32 *)(GT64120_BASE+(ofs)) = (data); } while (0) -#define GT_READ(ofs) le32_to_cpu(__GT_READ(ofs)) -#define GT_WRITE(ofs, data) __GT_WRITE(ofs, cpu_to_le32(data)) - -extern void gt641xx_set_base_clock(unsigned int clock); -extern int gt641xx_timer0_state(void); - -#endif /* _ASM_GT64120_H */ diff --git a/include/asm-mips/hardirq.h b/include/asm-mips/hardirq.h deleted file mode 100644 index 90bf399e6dd9..000000000000 --- a/include/asm-mips/hardirq.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1997, 98, 99, 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - * Copyright (C) 2001 MIPS Technologies, Inc. - */ -#ifndef _ASM_HARDIRQ_H -#define _ASM_HARDIRQ_H - -#include -#include - -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -extern void ack_bad_irq(unsigned int irq); - -#endif /* _ASM_HARDIRQ_H */ diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h deleted file mode 100644 index 2de638f84c86..000000000000 --- a/include/asm-mips/hazards.h +++ /dev/null @@ -1,271 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 04, 07 Ralf Baechle - * Copyright (C) MIPS Technologies, Inc. - * written by Ralf Baechle - */ -#ifndef _ASM_HAZARDS_H -#define _ASM_HAZARDS_H - -#ifdef __ASSEMBLY__ -#define ASMMACRO(name, code...) .macro name; code; .endm -#else - -#include - -#define ASMMACRO(name, code...) \ -__asm__(".macro " #name "; " #code "; .endm"); \ - \ -static inline void name(void) \ -{ \ - __asm__ __volatile__ (#name); \ -} - -/* - * MIPS R2 instruction hazard barrier. Needs to be called as a subroutine. - */ -extern void mips_ihb(void); - -#endif - -ASMMACRO(_ssnop, - sll $0, $0, 1 - ) - -ASMMACRO(_ehb, - sll $0, $0, 3 - ) - -/* - * TLB hazards - */ -#if defined(CONFIG_CPU_MIPSR2) - -/* - * MIPSR2 defines ehb for hazard avoidance - */ - -ASMMACRO(mtc0_tlbw_hazard, - _ehb - ) -ASMMACRO(tlbw_use_hazard, - _ehb - ) -ASMMACRO(tlb_probe_hazard, - _ehb - ) -ASMMACRO(irq_enable_hazard, - _ehb - ) -ASMMACRO(irq_disable_hazard, - _ehb - ) -ASMMACRO(back_to_back_c0_hazard, - _ehb - ) -/* - * gcc has a tradition of misscompiling the previous construct using the - * address of a label as argument to inline assembler. Gas otoh has the - * annoying difference between la and dla which are only usable for 32-bit - * rsp. 64-bit code, so can't be used without conditional compilation. - * The alterantive is switching the assembler to 64-bit code which happens - * to work right even for 32-bit code ... - */ -#define instruction_hazard() \ -do { \ - unsigned long tmp; \ - \ - __asm__ __volatile__( \ - " .set mips64r2 \n" \ - " dla %0, 1f \n" \ - " jr.hb %0 \n" \ - " .set mips0 \n" \ - "1: \n" \ - : "=r" (tmp)); \ -} while (0) - -#elif defined(CONFIG_CPU_MIPSR1) - -/* - * These are slightly complicated by the fact that we guarantee R1 kernels to - * run fine on R2 processors. - */ -ASMMACRO(mtc0_tlbw_hazard, - _ssnop; _ssnop; _ehb - ) -ASMMACRO(tlbw_use_hazard, - _ssnop; _ssnop; _ssnop; _ehb - ) -ASMMACRO(tlb_probe_hazard, - _ssnop; _ssnop; _ssnop; _ehb - ) -ASMMACRO(irq_enable_hazard, - _ssnop; _ssnop; _ssnop; _ehb - ) -ASMMACRO(irq_disable_hazard, - _ssnop; _ssnop; _ssnop; _ehb - ) -ASMMACRO(back_to_back_c0_hazard, - _ssnop; _ssnop; _ssnop; _ehb - ) -/* - * gcc has a tradition of misscompiling the previous construct using the - * address of a label as argument to inline assembler. Gas otoh has the - * annoying difference between la and dla which are only usable for 32-bit - * rsp. 64-bit code, so can't be used without conditional compilation. - * The alterantive is switching the assembler to 64-bit code which happens - * to work right even for 32-bit code ... - */ -#define __instruction_hazard() \ -do { \ - unsigned long tmp; \ - \ - __asm__ __volatile__( \ - " .set mips64r2 \n" \ - " dla %0, 1f \n" \ - " jr.hb %0 \n" \ - " .set mips0 \n" \ - "1: \n" \ - : "=r" (tmp)); \ -} while (0) - -#define instruction_hazard() \ -do { \ - if (cpu_has_mips_r2) \ - __instruction_hazard(); \ -} while (0) - -#elif defined(CONFIG_CPU_R10000) - -/* - * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. - */ - -ASMMACRO(mtc0_tlbw_hazard, - ) -ASMMACRO(tlbw_use_hazard, - ) -ASMMACRO(tlb_probe_hazard, - ) -ASMMACRO(irq_enable_hazard, - ) -ASMMACRO(irq_disable_hazard, - ) -ASMMACRO(back_to_back_c0_hazard, - ) -#define instruction_hazard() do { } while (0) - -#elif defined(CONFIG_CPU_RM9000) - -/* - * RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent - * use of the JTLB for instructions should not occur for 4 cpu cycles and use - * for data translations should not occur for 3 cpu cycles. - */ - -ASMMACRO(mtc0_tlbw_hazard, - _ssnop; _ssnop; _ssnop; _ssnop - ) -ASMMACRO(tlbw_use_hazard, - _ssnop; _ssnop; _ssnop; _ssnop - ) -ASMMACRO(tlb_probe_hazard, - _ssnop; _ssnop; _ssnop; _ssnop - ) -ASMMACRO(irq_enable_hazard, - ) -ASMMACRO(irq_disable_hazard, - ) -ASMMACRO(back_to_back_c0_hazard, - ) -#define instruction_hazard() do { } while (0) - -#elif defined(CONFIG_CPU_SB1) - -/* - * Mostly like R4000 for historic reasons - */ -ASMMACRO(mtc0_tlbw_hazard, - ) -ASMMACRO(tlbw_use_hazard, - ) -ASMMACRO(tlb_probe_hazard, - ) -ASMMACRO(irq_enable_hazard, - ) -ASMMACRO(irq_disable_hazard, - _ssnop; _ssnop; _ssnop - ) -ASMMACRO(back_to_back_c0_hazard, - ) -#define instruction_hazard() do { } while (0) - -#else - -/* - * Finally the catchall case for all other processors including R4000, R4400, - * R4600, R4700, R5000, RM7000, NEC VR41xx etc. - * - * The taken branch will result in a two cycle penalty for the two killed - * instructions on R4000 / R4400. Other processors only have a single cycle - * hazard so this is nice trick to have an optimal code for a range of - * processors. - */ -ASMMACRO(mtc0_tlbw_hazard, - nop; nop - ) -ASMMACRO(tlbw_use_hazard, - nop; nop; nop - ) -ASMMACRO(tlb_probe_hazard, - nop; nop; nop - ) -ASMMACRO(irq_enable_hazard, - _ssnop; _ssnop; _ssnop; - ) -ASMMACRO(irq_disable_hazard, - nop; nop; nop - ) -ASMMACRO(back_to_back_c0_hazard, - _ssnop; _ssnop; _ssnop; - ) -#define instruction_hazard() do { } while (0) - -#endif - - -/* FPU hazards */ - -#if defined(CONFIG_CPU_SB1) -ASMMACRO(enable_fpu_hazard, - .set push; - .set mips64; - .set noreorder; - _ssnop; - bnezl $0, .+4; - _ssnop; - .set pop -) -ASMMACRO(disable_fpu_hazard, -) - -#elif defined(CONFIG_CPU_MIPSR2) -ASMMACRO(enable_fpu_hazard, - _ehb -) -ASMMACRO(disable_fpu_hazard, - _ehb -) -#else -ASMMACRO(enable_fpu_hazard, - nop; nop; nop; nop -) -ASMMACRO(disable_fpu_hazard, - _ehb -) -#endif - -#endif /* _ASM_HAZARDS_H */ diff --git a/include/asm-mips/highmem.h b/include/asm-mips/highmem.h deleted file mode 100644 index 4374ab2adc75..000000000000 --- a/include/asm-mips/highmem.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * highmem.h: virtual kernel memory mappings for high memory - * - * Used in CONFIG_HIGHMEM systems for memory pages which - * are not addressable by direct kernel virtual addresses. - * - * Copyright (C) 1999 Gerhard Wichert, Siemens AG - * Gerhard.Wichert@pdb.siemens.de - * - * - * Redesigned the x86 32-bit VM architecture to deal with - * up to 16 Terabyte physical memory. With current x86 CPUs - * we now support up to 64 Gigabytes physical RAM. - * - * Copyright (C) 1999 Ingo Molnar - */ -#ifndef _ASM_HIGHMEM_H -#define _ASM_HIGHMEM_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include - -/* undef for production */ -#define HIGHMEM_DEBUG 1 - -/* declarations for highmem.c */ -extern unsigned long highstart_pfn, highend_pfn; - -extern pte_t *kmap_pte; -extern pgprot_t kmap_prot; -extern pte_t *pkmap_page_table; - -/* - * Right now we initialize only a single pte table. It can be extended - * easily, subsequent pte tables have to be allocated in one physical - * chunk of RAM. - */ -#define LAST_PKMAP 1024 -#define LAST_PKMAP_MASK (LAST_PKMAP-1) -#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) -#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) - -extern void * kmap_high(struct page *page); -extern void kunmap_high(struct page *page); - -extern void *__kmap(struct page *page); -extern void __kunmap(struct page *page); -extern void *__kmap_atomic(struct page *page, enum km_type type); -extern void __kunmap_atomic(void *kvaddr, enum km_type type); -extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type); -extern struct page *__kmap_atomic_to_page(void *ptr); - -#define kmap __kmap -#define kunmap __kunmap -#define kmap_atomic __kmap_atomic -#define kunmap_atomic __kunmap_atomic -#define kmap_atomic_to_page __kmap_atomic_to_page - -#define flush_cache_kmaps() flush_cache_all() - -#endif /* __KERNEL__ */ - -#endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-mips/hw_irq.h b/include/asm-mips/hw_irq.h deleted file mode 100644 index aca05a43a97b..000000000000 --- a/include/asm-mips/hw_irq.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000, 2001, 2002 by Ralf Baechle - */ -#ifndef __ASM_HW_IRQ_H -#define __ASM_HW_IRQ_H - -#include - -extern atomic_t irq_err_count; - -/* - * interrupt-retrigger: NOP for now. This may not be apropriate for all - * machines, we'll see ... - */ - -#endif /* __ASM_HW_IRQ_H */ diff --git a/include/asm-mips/i8253.h b/include/asm-mips/i8253.h deleted file mode 100644 index 5dabc870b322..000000000000 --- a/include/asm-mips/i8253.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Machine specific IO port address definition for generic. - * Written by Osamu Tomita - */ -#ifndef __ASM_I8253_H -#define __ASM_I8253_H - -#include - -/* i8253A PIT registers */ -#define PIT_MODE 0x43 -#define PIT_CH0 0x40 -#define PIT_CH2 0x42 - -#define PIT_TICK_RATE 1193182UL - -extern spinlock_t i8253_lock; - -extern void setup_pit_timer(void); - -#endif /* __ASM_I8253_H */ diff --git a/include/asm-mips/i8259.h b/include/asm-mips/i8259.h deleted file mode 100644 index 8572a2d90484..000000000000 --- a/include/asm-mips/i8259.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * include/asm-mips/i8259.h - * - * i8259A interrupt definitions. - * - * Copyright (C) 2003 Maciej W. Rozycki - * Copyright (C) 2003 Ralf Baechle - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_I8259_H -#define _ASM_I8259_H - -#include -#include - -#include -#include - -/* i8259A PIC registers */ -#define PIC_MASTER_CMD 0x20 -#define PIC_MASTER_IMR 0x21 -#define PIC_MASTER_ISR PIC_MASTER_CMD -#define PIC_MASTER_POLL PIC_MASTER_ISR -#define PIC_MASTER_OCW3 PIC_MASTER_ISR -#define PIC_SLAVE_CMD 0xa0 -#define PIC_SLAVE_IMR 0xa1 - -/* i8259A PIC related value */ -#define PIC_CASCADE_IR 2 -#define MASTER_ICW4_DEFAULT 0x01 -#define SLAVE_ICW4_DEFAULT 0x01 -#define PIC_ICW4_AEOI 2 - -extern spinlock_t i8259A_lock; - -extern int i8259A_irq_pending(unsigned int irq); -extern void make_8259A_irq(unsigned int irq); - -extern void init_i8259_irqs(void); - -/* - * Do the traditional i8259 interrupt polling thing. This is for the few - * cases where no better interrupt acknowledge method is available and we - * absolutely must touch the i8259. - */ -static inline int i8259_irq(void) -{ - int irq; - - spin_lock(&i8259A_lock); - - /* Perform an interrupt acknowledge cycle on controller 1. */ - outb(0x0C, PIC_MASTER_CMD); /* prepare for poll */ - irq = inb(PIC_MASTER_CMD) & 7; - if (irq == PIC_CASCADE_IR) { - /* - * Interrupt is cascaded so perform interrupt - * acknowledge on controller 2. - */ - outb(0x0C, PIC_SLAVE_CMD); /* prepare for poll */ - irq = (inb(PIC_SLAVE_CMD) & 7) + 8; - } - - if (unlikely(irq == 7)) { - /* - * This may be a spurious interrupt. - * - * Read the interrupt status register (ISR). If the most - * significant bit is not set then there is no valid - * interrupt. - */ - outb(0x0B, PIC_MASTER_ISR); /* ISR register */ - if(~inb(PIC_MASTER_ISR) & 0x80) - irq = -1; - } - - spin_unlock(&i8259A_lock); - - return likely(irq >= 0) ? irq + I8259A_IRQ_BASE : irq; -} - -#endif /* _ASM_I8259_H */ diff --git a/include/asm-mips/ide.h b/include/asm-mips/ide.h deleted file mode 100644 index bb674c3b0303..000000000000 --- a/include/asm-mips/ide.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * This file contains the MIPS architecture specific IDE code. - */ -#ifndef __ASM_IDE_H -#define __ASM_IDE_H - -#include - -#endif /* __ASM_IDE_H */ diff --git a/include/asm-mips/inst.h b/include/asm-mips/inst.h deleted file mode 100644 index 6489f00731ca..000000000000 --- a/include/asm-mips/inst.h +++ /dev/null @@ -1,394 +0,0 @@ -/* - * Format of an instruction in memory. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 2000 by Ralf Baechle - * Copyright (C) 2006 by Thiemo Seufer - */ -#ifndef _ASM_INST_H -#define _ASM_INST_H - -/* - * Major opcodes; before MIPS IV cop1x was called cop3. - */ -enum major_op { - spec_op, bcond_op, j_op, jal_op, - beq_op, bne_op, blez_op, bgtz_op, - addi_op, addiu_op, slti_op, sltiu_op, - andi_op, ori_op, xori_op, lui_op, - cop0_op, cop1_op, cop2_op, cop1x_op, - beql_op, bnel_op, blezl_op, bgtzl_op, - daddi_op, daddiu_op, ldl_op, ldr_op, - spec2_op, jalx_op, mdmx_op, spec3_op, - lb_op, lh_op, lwl_op, lw_op, - lbu_op, lhu_op, lwr_op, lwu_op, - sb_op, sh_op, swl_op, sw_op, - sdl_op, sdr_op, swr_op, cache_op, - ll_op, lwc1_op, lwc2_op, pref_op, - lld_op, ldc1_op, ldc2_op, ld_op, - sc_op, swc1_op, swc2_op, major_3b_op, - scd_op, sdc1_op, sdc2_op, sd_op -}; - -/* - * func field of spec opcode. - */ -enum spec_op { - sll_op, movc_op, srl_op, sra_op, - sllv_op, pmon_op, srlv_op, srav_op, - jr_op, jalr_op, movz_op, movn_op, - syscall_op, break_op, spim_op, sync_op, - mfhi_op, mthi_op, mflo_op, mtlo_op, - dsllv_op, spec2_unused_op, dsrlv_op, dsrav_op, - mult_op, multu_op, div_op, divu_op, - dmult_op, dmultu_op, ddiv_op, ddivu_op, - add_op, addu_op, sub_op, subu_op, - and_op, or_op, xor_op, nor_op, - spec3_unused_op, spec4_unused_op, slt_op, sltu_op, - dadd_op, daddu_op, dsub_op, dsubu_op, - tge_op, tgeu_op, tlt_op, tltu_op, - teq_op, spec5_unused_op, tne_op, spec6_unused_op, - dsll_op, spec7_unused_op, dsrl_op, dsra_op, - dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op -}; - -/* - * func field of spec2 opcode. - */ -enum spec2_op { - madd_op, maddu_op, mul_op, spec2_3_unused_op, - msub_op, msubu_op, /* more unused ops */ - clz_op = 0x20, clo_op, - dclz_op = 0x24, dclo_op, - sdbpp_op = 0x3f -}; - -/* - * func field of spec3 opcode. - */ -enum spec3_op { - ext_op, dextm_op, dextu_op, dext_op, - ins_op, dinsm_op, dinsu_op, dins_op, - bshfl_op = 0x20, - dbshfl_op = 0x24, - rdhwr_op = 0x3b -}; - -/* - * rt field of bcond opcodes. - */ -enum rt_op { - bltz_op, bgez_op, bltzl_op, bgezl_op, - spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07, - tgei_op, tgeiu_op, tlti_op, tltiu_op, - teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op, - bltzal_op, bgezal_op, bltzall_op, bgezall_op, - rt_op_0x14, rt_op_0x15, rt_op_0x16, rt_op_0x17, - rt_op_0x18, rt_op_0x19, rt_op_0x1a, rt_op_0x1b, - bposge32_op, rt_op_0x1d, rt_op_0x1e, rt_op_0x1f -}; - -/* - * rs field of cop opcodes. - */ -enum cop_op { - mfc_op = 0x00, dmfc_op = 0x01, - cfc_op = 0x02, mtc_op = 0x04, - dmtc_op = 0x05, ctc_op = 0x06, - bc_op = 0x08, cop_op = 0x10, - copm_op = 0x18 -}; - -/* - * rt field of cop.bc_op opcodes - */ -enum bcop_op { - bcf_op, bct_op, bcfl_op, bctl_op -}; - -/* - * func field of cop0 coi opcodes. - */ -enum cop0_coi_func { - tlbr_op = 0x01, tlbwi_op = 0x02, - tlbwr_op = 0x06, tlbp_op = 0x08, - rfe_op = 0x10, eret_op = 0x18 -}; - -/* - * func field of cop0 com opcodes. - */ -enum cop0_com_func { - tlbr1_op = 0x01, tlbw_op = 0x02, - tlbp1_op = 0x08, dctr_op = 0x09, - dctw_op = 0x0a -}; - -/* - * fmt field of cop1 opcodes. - */ -enum cop1_fmt { - s_fmt, d_fmt, e_fmt, q_fmt, - w_fmt, l_fmt -}; - -/* - * func field of cop1 instructions using d, s or w format. - */ -enum cop1_sdw_func { - fadd_op = 0x00, fsub_op = 0x01, - fmul_op = 0x02, fdiv_op = 0x03, - fsqrt_op = 0x04, fabs_op = 0x05, - fmov_op = 0x06, fneg_op = 0x07, - froundl_op = 0x08, ftruncl_op = 0x09, - fceill_op = 0x0a, ffloorl_op = 0x0b, - fround_op = 0x0c, ftrunc_op = 0x0d, - fceil_op = 0x0e, ffloor_op = 0x0f, - fmovc_op = 0x11, fmovz_op = 0x12, - fmovn_op = 0x13, frecip_op = 0x15, - frsqrt_op = 0x16, fcvts_op = 0x20, - fcvtd_op = 0x21, fcvte_op = 0x22, - fcvtw_op = 0x24, fcvtl_op = 0x25, - fcmp_op = 0x30 -}; - -/* - * func field of cop1x opcodes (MIPS IV). - */ -enum cop1x_func { - lwxc1_op = 0x00, ldxc1_op = 0x01, - pfetch_op = 0x07, swxc1_op = 0x08, - sdxc1_op = 0x09, madd_s_op = 0x20, - madd_d_op = 0x21, madd_e_op = 0x22, - msub_s_op = 0x28, msub_d_op = 0x29, - msub_e_op = 0x2a, nmadd_s_op = 0x30, - nmadd_d_op = 0x31, nmadd_e_op = 0x32, - nmsub_s_op = 0x38, nmsub_d_op = 0x39, - nmsub_e_op = 0x3a -}; - -/* - * func field for mad opcodes (MIPS IV). - */ -enum mad_func { - madd_fp_op = 0x08, msub_fp_op = 0x0a, - nmadd_fp_op = 0x0c, nmsub_fp_op = 0x0e -}; - -/* - * Damn ... bitfields depend from byteorder :-( - */ -#ifdef __MIPSEB__ -struct j_format { /* Jump format */ - unsigned int opcode : 6; - unsigned int target : 26; -}; - -struct i_format { /* Immediate format (addi, lw, ...) */ - unsigned int opcode : 6; - unsigned int rs : 5; - unsigned int rt : 5; - signed int simmediate : 16; -}; - -struct u_format { /* Unsigned immediate format (ori, xori, ...) */ - unsigned int opcode : 6; - unsigned int rs : 5; - unsigned int rt : 5; - unsigned int uimmediate : 16; -}; - -struct c_format { /* Cache (>= R6000) format */ - unsigned int opcode : 6; - unsigned int rs : 5; - unsigned int c_op : 3; - unsigned int cache : 2; - unsigned int simmediate : 16; -}; - -struct r_format { /* Register format */ - unsigned int opcode : 6; - unsigned int rs : 5; - unsigned int rt : 5; - unsigned int rd : 5; - unsigned int re : 5; - unsigned int func : 6; -}; - -struct p_format { /* Performance counter format (R10000) */ - unsigned int opcode : 6; - unsigned int rs : 5; - unsigned int rt : 5; - unsigned int rd : 5; - unsigned int re : 5; - unsigned int func : 6; -}; - -struct f_format { /* FPU register format */ - unsigned int opcode : 6; - unsigned int : 1; - unsigned int fmt : 4; - unsigned int rt : 5; - unsigned int rd : 5; - unsigned int re : 5; - unsigned int func : 6; -}; - -struct ma_format { /* FPU multipy and add format (MIPS IV) */ - unsigned int opcode : 6; - unsigned int fr : 5; - unsigned int ft : 5; - unsigned int fs : 5; - unsigned int fd : 5; - unsigned int func : 4; - unsigned int fmt : 2; -}; - -#elif defined(__MIPSEL__) - -struct j_format { /* Jump format */ - unsigned int target : 26; - unsigned int opcode : 6; -}; - -struct i_format { /* Immediate format */ - signed int simmediate : 16; - unsigned int rt : 5; - unsigned int rs : 5; - unsigned int opcode : 6; -}; - -struct u_format { /* Unsigned immediate format */ - unsigned int uimmediate : 16; - unsigned int rt : 5; - unsigned int rs : 5; - unsigned int opcode : 6; -}; - -struct c_format { /* Cache (>= R6000) format */ - unsigned int simmediate : 16; - unsigned int cache : 2; - unsigned int c_op : 3; - unsigned int rs : 5; - unsigned int opcode : 6; -}; - -struct r_format { /* Register format */ - unsigned int func : 6; - unsigned int re : 5; - unsigned int rd : 5; - unsigned int rt : 5; - unsigned int rs : 5; - unsigned int opcode : 6; -}; - -struct p_format { /* Performance counter format (R10000) */ - unsigned int func : 6; - unsigned int re : 5; - unsigned int rd : 5; - unsigned int rt : 5; - unsigned int rs : 5; - unsigned int opcode : 6; -}; - -struct f_format { /* FPU register format */ - unsigned int func : 6; - unsigned int re : 5; - unsigned int rd : 5; - unsigned int rt : 5; - unsigned int fmt : 4; - unsigned int : 1; - unsigned int opcode : 6; -}; - -struct ma_format { /* FPU multipy and add format (MIPS IV) */ - unsigned int fmt : 2; - unsigned int func : 4; - unsigned int fd : 5; - unsigned int fs : 5; - unsigned int ft : 5; - unsigned int fr : 5; - unsigned int opcode : 6; -}; - -#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */ -#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?" -#endif - -union mips_instruction { - unsigned int word; - unsigned short halfword[2]; - unsigned char byte[4]; - struct j_format j_format; - struct i_format i_format; - struct u_format u_format; - struct c_format c_format; - struct r_format r_format; - struct f_format f_format; - struct ma_format ma_format; -}; - -/* HACHACHAHCAHC ... */ - -/* In case some other massaging is needed, keep MIPSInst as wrapper */ - -#define MIPSInst(x) x - -#define I_OPCODE_SFT 26 -#define MIPSInst_OPCODE(x) (MIPSInst(x) >> I_OPCODE_SFT) - -#define I_JTARGET_SFT 0 -#define MIPSInst_JTARGET(x) (MIPSInst(x) & 0x03ffffff) - -#define I_RS_SFT 21 -#define MIPSInst_RS(x) ((MIPSInst(x) & 0x03e00000) >> I_RS_SFT) - -#define I_RT_SFT 16 -#define MIPSInst_RT(x) ((MIPSInst(x) & 0x001f0000) >> I_RT_SFT) - -#define I_IMM_SFT 0 -#define MIPSInst_SIMM(x) ((int)((short)(MIPSInst(x) & 0xffff))) -#define MIPSInst_UIMM(x) (MIPSInst(x) & 0xffff) - -#define I_CACHEOP_SFT 18 -#define MIPSInst_CACHEOP(x) ((MIPSInst(x) & 0x001c0000) >> I_CACHEOP_SFT) - -#define I_CACHESEL_SFT 16 -#define MIPSInst_CACHESEL(x) ((MIPSInst(x) & 0x00030000) >> I_CACHESEL_SFT) - -#define I_RD_SFT 11 -#define MIPSInst_RD(x) ((MIPSInst(x) & 0x0000f800) >> I_RD_SFT) - -#define I_RE_SFT 6 -#define MIPSInst_RE(x) ((MIPSInst(x) & 0x000007c0) >> I_RE_SFT) - -#define I_FUNC_SFT 0 -#define MIPSInst_FUNC(x) (MIPSInst(x) & 0x0000003f) - -#define I_FFMT_SFT 21 -#define MIPSInst_FFMT(x) ((MIPSInst(x) & 0x01e00000) >> I_FFMT_SFT) - -#define I_FT_SFT 16 -#define MIPSInst_FT(x) ((MIPSInst(x) & 0x001f0000) >> I_FT_SFT) - -#define I_FS_SFT 11 -#define MIPSInst_FS(x) ((MIPSInst(x) & 0x0000f800) >> I_FS_SFT) - -#define I_FD_SFT 6 -#define MIPSInst_FD(x) ((MIPSInst(x) & 0x000007c0) >> I_FD_SFT) - -#define I_FR_SFT 21 -#define MIPSInst_FR(x) ((MIPSInst(x) & 0x03e00000) >> I_FR_SFT) - -#define I_FMA_FUNC_SFT 2 -#define MIPSInst_FMA_FUNC(x) ((MIPSInst(x) & 0x0000003c) >> I_FMA_FUNC_SFT) - -#define I_FMA_FFMT_SFT 0 -#define MIPSInst_FMA_FFMT(x) (MIPSInst(x) & 0x00000003) - -typedef unsigned int mips_instruction; - -#endif /* _ASM_INST_H */ diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h deleted file mode 100644 index 501a40b9f18d..000000000000 --- a/include/asm-mips/io.h +++ /dev/null @@ -1,589 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 1995 Waldorf GmbH - * Copyright (C) 1994 - 2000, 06 Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. - * Author: Maciej W. Rozycki - */ -#ifndef _ASM_IO_H -#define _ASM_IO_H - -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -/* - * Slowdown I/O port space accesses for antique hardware. - */ -#undef CONF_SLOWDOWN_IO - -/* - * Raw operations are never swapped in software. OTOH values that raw - * operations are working on may or may not have been swapped by the bus - * hardware. An example use would be for flash memory that's used for - * execute in place. - */ -# define __raw_ioswabb(a, x) (x) -# define __raw_ioswabw(a, x) (x) -# define __raw_ioswabl(a, x) (x) -# define __raw_ioswabq(a, x) (x) -# define ____raw_ioswabq(a, x) (x) - -/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */ - -#define IO_SPACE_LIMIT 0xffff - -/* - * On MIPS I/O ports are memory mapped, so we access them using normal - * load/store instructions. mips_io_port_base is the virtual address to - * which all ports are being mapped. For sake of efficiency some code - * assumes that this is an address that can be loaded with a single lui - * instruction, so the lower 16 bits must be zero. Should be true on - * on any sane architecture; generic code does not use this assumption. - */ -extern const unsigned long mips_io_port_base; - -/* - * Gcc will generate code to load the value of mips_io_port_base after each - * function call which may be fairly wasteful in some cases. So we don't - * play quite by the book. We tell gcc mips_io_port_base is a long variable - * which solves the code generation issue. Now we need to violate the - * aliasing rules a little to make initialization possible and finally we - * will need the barrier() to fight side effects of the aliasing chat. - * This trickery will eventually collapse under gcc's optimizer. Oh well. - */ -static inline void set_io_port_base(unsigned long base) -{ - * (unsigned long *) &mips_io_port_base = base; - barrier(); -} - -/* - * Thanks to James van Artsdalen for a better timing-fix than - * the two short jumps: using outb's to a nonexistent port seems - * to guarantee better timings even on fast machines. - * - * On the other hand, I'd like to be sure of a non-existent port: - * I feel a bit unsafe about using 0x80 (should be safe, though) - * - * Linus - * - */ - -#define __SLOW_DOWN_IO \ - __asm__ __volatile__( \ - "sb\t$0,0x80(%0)" \ - : : "r" (mips_io_port_base)); - -#ifdef CONF_SLOWDOWN_IO -#ifdef REALLY_SLOW_IO -#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; } -#else -#define SLOW_DOWN_IO __SLOW_DOWN_IO -#endif -#else -#define SLOW_DOWN_IO -#endif - -/* - * virt_to_phys - map virtual addresses to physical - * @address: address to remap - * - * The returned physical address is the physical (CPU) mapping for - * the memory address given. It is only valid to use this function on - * addresses directly mapped or allocated via kmalloc. - * - * This function does not give bus mappings for DMA transfers. In - * almost all conceivable cases a device driver should not be using - * this function - */ -static inline unsigned long virt_to_phys(volatile const void *address) -{ - return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET; -} - -/* - * phys_to_virt - map physical address to virtual - * @address: address to remap - * - * The returned virtual address is a current CPU mapping for - * the memory address given. It is only valid to use this function on - * addresses that have a kernel mapping - * - * This function does not handle bus mappings for DMA transfers. In - * almost all conceivable cases a device driver should not be using - * this function - */ -static inline void * phys_to_virt(unsigned long address) -{ - return (void *)(address + PAGE_OFFSET - PHYS_OFFSET); -} - -/* - * ISA I/O bus memory addresses are 1:1 with the physical address. - */ -static inline unsigned long isa_virt_to_bus(volatile void * address) -{ - return (unsigned long)address - PAGE_OFFSET; -} - -static inline void * isa_bus_to_virt(unsigned long address) -{ - return (void *)(address + PAGE_OFFSET); -} - -#define isa_page_to_bus page_to_phys - -/* - * However PCI ones are not necessarily 1:1 and therefore these interfaces - * are forbidden in portable PCI drivers. - * - * Allow them for x86 for legacy drivers, though. - */ -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -/* - * Change "struct page" to physical address. - */ -#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) - -extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags); -extern void __iounmap(const volatile void __iomem *addr); - -static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, - unsigned long flags) -{ - void __iomem *addr = plat_ioremap(offset, size, flags); - - if (addr) - return addr; - -#define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL)) - - if (cpu_has_64bit_addresses) { - u64 base = UNCAC_BASE; - - /* - * R10000 supports a 2 bit uncached attribute therefore - * UNCAC_BASE may not equal IO_BASE. - */ - if (flags == _CACHE_UNCACHED) - base = (u64) IO_BASE; - return (void __iomem *) (unsigned long) (base + offset); - } else if (__builtin_constant_p(offset) && - __builtin_constant_p(size) && __builtin_constant_p(flags)) { - phys_t phys_addr, last_addr; - - phys_addr = fixup_bigphys_addr(offset, size); - - /* Don't allow wraparound or zero size. */ - last_addr = phys_addr + size - 1; - if (!size || last_addr < phys_addr) - return NULL; - - /* - * Map uncached objects in the low 512MB of address - * space using KSEG1. - */ - if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) && - flags == _CACHE_UNCACHED) - return (void __iomem *) - (unsigned long)CKSEG1ADDR(phys_addr); - } - - return __ioremap(offset, size, flags); - -#undef __IS_LOW512 -} - -/* - * ioremap - map bus memory into CPU space - * @offset: bus address of the memory - * @size: size of the resource to map - * - * ioremap performs a platform specific sequence of operations to - * make bus memory CPU accessible via the readb/readw/readl/writeb/ - * writew/writel functions and the other mmio helpers. The returned - * address is not guaranteed to be usable directly as a virtual - * address. - */ -#define ioremap(offset, size) \ - __ioremap_mode((offset), (size), _CACHE_UNCACHED) - -/* - * ioremap_nocache - map bus memory into CPU space - * @offset: bus address of the memory - * @size: size of the resource to map - * - * ioremap_nocache performs a platform specific sequence of operations to - * make bus memory CPU accessible via the readb/readw/readl/writeb/ - * writew/writel functions and the other mmio helpers. The returned - * address is not guaranteed to be usable directly as a virtual - * address. - * - * This version of ioremap ensures that the memory is marked uncachable - * on the CPU as well as honouring existing caching rules from things like - * the PCI bus. Note that there are other caches and buffers on many - * busses. In paticular driver authors should read up on PCI writes - * - * It's useful if some control registers are in such an area and - * write combining or read caching is not desirable: - */ -#define ioremap_nocache(offset, size) \ - __ioremap_mode((offset), (size), _CACHE_UNCACHED) - -/* - * ioremap_cachable - map bus memory into CPU space - * @offset: bus address of the memory - * @size: size of the resource to map - * - * ioremap_nocache performs a platform specific sequence of operations to - * make bus memory CPU accessible via the readb/readw/readl/writeb/ - * writew/writel functions and the other mmio helpers. The returned - * address is not guaranteed to be usable directly as a virtual - * address. - * - * This version of ioremap ensures that the memory is marked cachable by - * the CPU. Also enables full write-combining. Useful for some - * memory-like regions on I/O busses. - */ -#define ioremap_cachable(offset, size) \ - __ioremap_mode((offset), (size), _page_cachable_default) - -/* - * These two are MIPS specific ioremap variant. ioremap_cacheable_cow - * requests a cachable mapping, ioremap_uncached_accelerated requests a - * mapping using the uncached accelerated mode which isn't supported on - * all processors. - */ -#define ioremap_cacheable_cow(offset, size) \ - __ioremap_mode((offset), (size), _CACHE_CACHABLE_COW) -#define ioremap_uncached_accelerated(offset, size) \ - __ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED) - -static inline void iounmap(const volatile void __iomem *addr) -{ - if (plat_iounmap(addr)) - return; - -#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1) - - if (cpu_has_64bit_addresses || - (__builtin_constant_p(addr) && __IS_KSEG1(addr))) - return; - - __iounmap(addr); - -#undef __IS_KSEG1 -} - -#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq) \ - \ -static inline void pfx##write##bwlq(type val, \ - volatile void __iomem *mem) \ -{ \ - volatile type *__mem; \ - type __val; \ - \ - __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ - \ - __val = pfx##ioswab##bwlq(__mem, val); \ - \ - if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ - *__mem = __val; \ - else if (cpu_has_64bits) { \ - unsigned long __flags; \ - type __tmp; \ - \ - if (irq) \ - local_irq_save(__flags); \ - __asm__ __volatile__( \ - ".set mips3" "\t\t# __writeq""\n\t" \ - "dsll32 %L0, %L0, 0" "\n\t" \ - "dsrl32 %L0, %L0, 0" "\n\t" \ - "dsll32 %M0, %M0, 0" "\n\t" \ - "or %L0, %L0, %M0" "\n\t" \ - "sd %L0, %2" "\n\t" \ - ".set mips0" "\n" \ - : "=r" (__tmp) \ - : "0" (__val), "m" (*__mem)); \ - if (irq) \ - local_irq_restore(__flags); \ - } else \ - BUG(); \ -} \ - \ -static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ -{ \ - volatile type *__mem; \ - type __val; \ - \ - __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ - \ - if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ - __val = *__mem; \ - else if (cpu_has_64bits) { \ - unsigned long __flags; \ - \ - if (irq) \ - local_irq_save(__flags); \ - __asm__ __volatile__( \ - ".set mips3" "\t\t# __readq" "\n\t" \ - "ld %L0, %1" "\n\t" \ - "dsra32 %M0, %L0, 0" "\n\t" \ - "sll %L0, %L0, 0" "\n\t" \ - ".set mips0" "\n" \ - : "=r" (__val) \ - : "m" (*__mem)); \ - if (irq) \ - local_irq_restore(__flags); \ - } else { \ - __val = 0; \ - BUG(); \ - } \ - \ - return pfx##ioswab##bwlq(__mem, __val); \ -} - -#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \ - \ -static inline void pfx##out##bwlq##p(type val, unsigned long port) \ -{ \ - volatile type *__addr; \ - type __val; \ - \ - __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ - \ - __val = pfx##ioswab##bwlq(__addr, val); \ - \ - /* Really, we want this to be atomic */ \ - BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ - \ - *__addr = __val; \ - slow; \ -} \ - \ -static inline type pfx##in##bwlq##p(unsigned long port) \ -{ \ - volatile type *__addr; \ - type __val; \ - \ - __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ - \ - BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ - \ - __val = *__addr; \ - slow; \ - \ - return pfx##ioswab##bwlq(__addr, __val); \ -} - -#define __BUILD_MEMORY_PFX(bus, bwlq, type) \ - \ -__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1) - -#define BUILDIO_MEM(bwlq, type) \ - \ -__BUILD_MEMORY_PFX(__raw_, bwlq, type) \ -__BUILD_MEMORY_PFX(, bwlq, type) \ -__BUILD_MEMORY_PFX(__mem_, bwlq, type) \ - -BUILDIO_MEM(b, u8) -BUILDIO_MEM(w, u16) -BUILDIO_MEM(l, u32) -BUILDIO_MEM(q, u64) - -#define __BUILD_IOPORT_PFX(bus, bwlq, type) \ - __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \ - __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO) - -#define BUILDIO_IOPORT(bwlq, type) \ - __BUILD_IOPORT_PFX(, bwlq, type) \ - __BUILD_IOPORT_PFX(__mem_, bwlq, type) - -BUILDIO_IOPORT(b, u8) -BUILDIO_IOPORT(w, u16) -BUILDIO_IOPORT(l, u32) -#ifdef CONFIG_64BIT -BUILDIO_IOPORT(q, u64) -#endif - -#define __BUILDIO(bwlq, type) \ - \ -__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0) - -__BUILDIO(q, u64) - -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl -#define readq_relaxed readq - -/* - * Some code tests for these symbols - */ -#define readq readq -#define writeq writeq - -#define __BUILD_MEMORY_STRING(bwlq, type) \ - \ -static inline void writes##bwlq(volatile void __iomem *mem, \ - const void *addr, unsigned int count) \ -{ \ - const volatile type *__addr = addr; \ - \ - while (count--) { \ - __mem_write##bwlq(*__addr, mem); \ - __addr++; \ - } \ -} \ - \ -static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ - unsigned int count) \ -{ \ - volatile type *__addr = addr; \ - \ - while (count--) { \ - *__addr = __mem_read##bwlq(mem); \ - __addr++; \ - } \ -} - -#define __BUILD_IOPORT_STRING(bwlq, type) \ - \ -static inline void outs##bwlq(unsigned long port, const void *addr, \ - unsigned int count) \ -{ \ - const volatile type *__addr = addr; \ - \ - while (count--) { \ - __mem_out##bwlq(*__addr, port); \ - __addr++; \ - } \ -} \ - \ -static inline void ins##bwlq(unsigned long port, void *addr, \ - unsigned int count) \ -{ \ - volatile type *__addr = addr; \ - \ - while (count--) { \ - *__addr = __mem_in##bwlq(port); \ - __addr++; \ - } \ -} - -#define BUILDSTRING(bwlq, type) \ - \ -__BUILD_MEMORY_STRING(bwlq, type) \ -__BUILD_IOPORT_STRING(bwlq, type) - -BUILDSTRING(b, u8) -BUILDSTRING(w, u16) -BUILDSTRING(l, u32) -#ifdef CONFIG_64BIT -BUILDSTRING(q, u64) -#endif - - -/* Depends on MIPS II instruction set */ -#define mmiowb() asm volatile ("sync" ::: "memory") - -static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) -{ - memset((void __force *) addr, val, count); -} -static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) -{ - memcpy(dst, (void __force *) src, count); -} -static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) -{ - memcpy((void __force *) dst, src, count); -} - -/* - * The caches on some architectures aren't dma-coherent and have need to - * handle this in software. There are three types of operations that - * can be applied to dma buffers. - * - * - dma_cache_wback_inv(start, size) makes caches and coherent by - * writing the content of the caches back to memory, if necessary. - * The function also invalidates the affected part of the caches as - * necessary before DMA transfers from outside to memory. - * - dma_cache_wback(start, size) makes caches and coherent by - * writing the content of the caches back to memory, if necessary. - * The function also invalidates the affected part of the caches as - * necessary before DMA transfers from outside to memory. - * - dma_cache_inv(start, size) invalidates the affected parts of the - * caches. Dirty lines of the caches may be written back or simply - * be discarded. This operation is necessary before dma operations - * to the memory. - * - * This API used to be exported; it now is for arch code internal use only. - */ -#ifdef CONFIG_DMA_NONCOHERENT - -extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size); -extern void (*_dma_cache_wback)(unsigned long start, unsigned long size); -extern void (*_dma_cache_inv)(unsigned long start, unsigned long size); - -#define dma_cache_wback_inv(start, size) _dma_cache_wback_inv(start, size) -#define dma_cache_wback(start, size) _dma_cache_wback(start, size) -#define dma_cache_inv(start, size) _dma_cache_inv(start, size) - -#else /* Sane hardware */ - -#define dma_cache_wback_inv(start,size) \ - do { (void) (start); (void) (size); } while (0) -#define dma_cache_wback(start,size) \ - do { (void) (start); (void) (size); } while (0) -#define dma_cache_inv(start,size) \ - do { (void) (start); (void) (size); } while (0) - -#endif /* CONFIG_DMA_NONCOHERENT */ - -/* - * Read a 32-bit register that requires a 64-bit read cycle on the bus. - * Avoid interrupt mucking, just adjust the address for 4-byte access. - * Assume the addresses are 8-byte aligned. - */ -#ifdef __MIPSEB__ -#define __CSR_32_ADJUST 4 -#else -#define __CSR_32_ADJUST 0 -#endif - -#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v)) -#define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST)) - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* _ASM_IO_H */ diff --git a/include/asm-mips/ioctl.h b/include/asm-mips/ioctl.h deleted file mode 100644 index 85067e248a83..000000000000 --- a/include/asm-mips/ioctl.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 96, 99, 2001 Ralf Baechle - */ -#ifndef _ASM_IOCTL_H -#define _ASM_IOCTL_H - -/* - * The original linux ioctl numbering scheme was just a general - * "anything goes" setup, where more or less random numbers were - * assigned. Sorry, I was clueless when I started out on this. - * - * On the alpha, we'll try to clean it up a bit, using a more sane - * ioctl numbering, and also trying to be compatible with OSF/1 in - * the process. I'd like to clean it up for the i386 as well, but - * it's so painful recognizing both the new and the old numbers.. - * - * The same applies for for the MIPS ABI; in fact even the macros - * from Linux/Alpha fit almost perfectly. - */ - -#define _IOC_NRBITS 8 -#define _IOC_TYPEBITS 8 -#define _IOC_SIZEBITS 13 -#define _IOC_DIRBITS 3 - -#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) -#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) -#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) -#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) - -#define _IOC_NRSHIFT 0 -#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS) -#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS) -#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS) - -/* - * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit. - * And this turns out useful to catch old ioctl numbers in header - * files for us. - */ -#define _IOC_NONE 1U -#define _IOC_READ 2U -#define _IOC_WRITE 4U - -/* - * The following are included for compatibility - */ -#define _IOC_VOID 0x20000000 -#define _IOC_OUT 0x40000000 -#define _IOC_IN 0x80000000 -#define _IOC_INOUT (IOC_IN|IOC_OUT) - -#define _IOC(dir, type, nr, size) \ - (((dir) << _IOC_DIRSHIFT) | \ - ((type) << _IOC_TYPESHIFT) | \ - ((nr) << _IOC_NRSHIFT) | \ - ((size) << _IOC_SIZESHIFT)) - -/* provoke compile error for invalid uses of size argument */ -extern unsigned int __invalid_size_argument_for_IOC; -#define _IOC_TYPECHECK(t) \ - ((sizeof(t) == sizeof(t[1]) && \ - sizeof(t) < (1 << _IOC_SIZEBITS)) ? \ - sizeof(t) : __invalid_size_argument_for_IOC) - -/* used to create numbers */ -#define _IO(type, nr) _IOC(_IOC_NONE, (type), (nr), 0) -#define _IOR(type, nr, size) _IOC(_IOC_READ, (type), (nr), (_IOC_TYPECHECK(size))) -#define _IOW(type, nr, size) _IOC(_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size))) -#define _IOWR(type, nr, size) _IOC(_IOC_READ|_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size))) -#define _IOR_BAD(type, nr, size) _IOC(_IOC_READ, (type), (nr), sizeof(size)) -#define _IOW_BAD(type, nr, size) _IOC(_IOC_WRITE, (type), (nr), sizeof(size)) -#define _IOWR_BAD(type, nr, size) _IOC(_IOC_READ|_IOC_WRITE, (type), (nr), sizeof(size)) - - -/* used to decode them.. */ -#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) -#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) -#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) -#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK) - -/* ...and for the drivers/sound files... */ - -#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) -#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) -#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) -#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT) -#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) - -#endif /* _ASM_IOCTL_H */ diff --git a/include/asm-mips/ioctls.h b/include/asm-mips/ioctls.h deleted file mode 100644 index 3f04a995ec54..000000000000 --- a/include/asm-mips/ioctls.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 2001 Ralf Baechle - * Copyright (C) 2001 MIPS Technologies, Inc. - */ -#ifndef __ASM_IOCTLS_H -#define __ASM_IOCTLS_H - -#include - -#define TCGETA 0x5401 -#define TCSETA 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */ -#define TCSETAW 0x5403 -#define TCSETAF 0x5404 - -#define TCSBRK 0x5405 -#define TCXONC 0x5406 -#define TCFLSH 0x5407 - -#define TCGETS 0x540d -#define TCSETS 0x540e -#define TCSETSW 0x540f -#define TCSETSF 0x5410 - -#define TIOCEXCL 0x740d /* set exclusive use of tty */ -#define TIOCNXCL 0x740e /* reset exclusive use of tty */ -#define TIOCOUTQ 0x7472 /* output queue size */ -#define TIOCSTI 0x5472 /* simulate terminal input */ -#define TIOCMGET 0x741d /* get all modem bits */ -#define TIOCMBIS 0x741b /* bis modem bits */ -#define TIOCMBIC 0x741c /* bic modem bits */ -#define TIOCMSET 0x741a /* set all modem bits */ -#define TIOCPKT 0x5470 /* pty: set/clear packet mode */ -#define TIOCPKT_DATA 0x00 /* data packet */ -#define TIOCPKT_FLUSHREAD 0x01 /* flush packet */ -#define TIOCPKT_FLUSHWRITE 0x02 /* flush packet */ -#define TIOCPKT_STOP 0x04 /* stop output */ -#define TIOCPKT_START 0x08 /* start output */ -#define TIOCPKT_NOSTOP 0x10 /* no more ^S, ^Q */ -#define TIOCPKT_DOSTOP 0x20 /* now do ^S ^Q */ -/* #define TIOCPKT_IOCTL 0x40 state change of pty driver */ -#define TIOCSWINSZ _IOW('t', 103, struct winsize) /* set window size */ -#define TIOCGWINSZ _IOR('t', 104, struct winsize) /* get window size */ -#define TIOCNOTTY 0x5471 /* void tty association */ -#define TIOCSETD 0x7401 -#define TIOCGETD 0x7400 - -#define FIOCLEX 0x6601 -#define FIONCLEX 0x6602 -#define FIOASYNC 0x667d -#define FIONBIO 0x667e -#define FIOQSIZE 0x667f - -#define TIOCGLTC 0x7474 /* get special local chars */ -#define TIOCSLTC 0x7475 /* set special local chars */ -#define TIOCSPGRP _IOW('t', 118, int) /* set pgrp of tty */ -#define TIOCGPGRP _IOR('t', 119, int) /* get pgrp of tty */ -#define TIOCCONS _IOW('t', 120, int) /* become virtual console */ - -#define FIONREAD 0x467f -#define TIOCINQ FIONREAD - -#define TIOCGETP 0x7408 -#define TIOCSETP 0x7409 -#define TIOCSETN 0x740a /* TIOCSETP wo flush */ - -/* #define TIOCSETA _IOW('t', 20, struct termios) set termios struct */ -/* #define TIOCSETAW _IOW('t', 21, struct termios) drain output, set */ -/* #define TIOCSETAF _IOW('t', 22, struct termios) drn out, fls in, set */ -/* #define TIOCGETD _IOR('t', 26, int) get line discipline */ -/* #define TIOCSETD _IOW('t', 27, int) set line discipline */ - /* 127-124 compat */ - -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x7416 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T', 0x2A, struct termios2) -#define TCSETS2 _IOW('T', 0x2B, struct termios2) -#define TCSETSW2 _IOW('T', 0x2C, struct termios2) -#define TCSETSF2 _IOW('T', 0x2D, struct termios2) -#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */ - -/* I hope the range from 0x5480 on is free ... */ -#define TIOCSCTTY 0x5480 /* become controlling tty */ -#define TIOCGSOFTCAR 0x5481 -#define TIOCSSOFTCAR 0x5482 -#define TIOCLINUX 0x5483 -#define TIOCGSERIAL 0x5484 -#define TIOCSSERIAL 0x5485 -#define TCSBRKP 0x5486 /* Needed for POSIX tcsendbreak() */ -#define TIOCSERCONFIG 0x5488 -#define TIOCSERGWILD 0x5489 -#define TIOCSERSWILD 0x548a -#define TIOCGLCKTRMIOS 0x548b -#define TIOCSLCKTRMIOS 0x548c -#define TIOCSERGSTRUCT 0x548d /* For debugging only */ -#define TIOCSERGETLSR 0x548e /* Get line status register */ -#define TIOCSERGETMULTI 0x548f /* Get multiport config */ -#define TIOCSERSETMULTI 0x5490 /* Set multiport config */ -#define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */ -#define TIOCGHAYESESP 0x5493 /* Get Hayes ESP configuration */ -#define TIOCSHAYESESP 0x5494 /* Set Hayes ESP configuration */ - -#endif /* __ASM_IOCTLS_H */ diff --git a/include/asm-mips/ip32/crime.h b/include/asm-mips/ip32/crime.h deleted file mode 100644 index 7c36b0e5b1c6..000000000000 --- a/include/asm-mips/ip32/crime.h +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Definitions for the SGI CRIME (CPU, Rendering, Interconnect and Memory - * Engine) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Harald Koerfgen - */ - -#ifndef __ASM_CRIME_H__ -#define __ASM_CRIME_H__ - -/* - * Address map - */ -#define CRIME_BASE 0x14000000 /* physical */ - -struct sgi_crime { - volatile unsigned long id; -#define CRIME_ID_MASK 0xff -#define CRIME_ID_IDBITS 0xf0 -#define CRIME_ID_IDVALUE 0xa0 -#define CRIME_ID_REV 0x0f -#define CRIME_REV_PETTY 0x00 -#define CRIME_REV_11 0x11 -#define CRIME_REV_13 0x13 -#define CRIME_REV_14 0x14 - - volatile unsigned long control; -#define CRIME_CONTROL_MASK 0x3fff -#define CRIME_CONTROL_TRITON_SYSADC 0x2000 -#define CRIME_CONTROL_CRIME_SYSADC 0x1000 -#define CRIME_CONTROL_HARD_RESET 0x0800 -#define CRIME_CONTROL_SOFT_RESET 0x0400 -#define CRIME_CONTROL_DOG_ENA 0x0200 -#define CRIME_CONTROL_ENDIANESS 0x0100 -#define CRIME_CONTROL_ENDIAN_BIG 0x0100 -#define CRIME_CONTROL_ENDIAN_LITTLE 0x0000 -#define CRIME_CONTROL_CQUEUE_HWM 0x000f -#define CRIME_CONTROL_CQUEUE_SHFT 0 -#define CRIME_CONTROL_WBUF_HWM 0x00f0 -#define CRIME_CONTROL_WBUF_SHFT 8 - - volatile unsigned long istat; - volatile unsigned long imask; - volatile unsigned long soft_int; - volatile unsigned long hard_int; -#define MACE_VID_IN1_INT BIT(0) -#define MACE_VID_IN2_INT BIT(1) -#define MACE_VID_OUT_INT BIT(2) -#define MACE_ETHERNET_INT BIT(3) -#define MACE_SUPERIO_INT BIT(4) -#define MACE_MISC_INT BIT(5) -#define MACE_AUDIO_INT BIT(6) -#define MACE_PCI_BRIDGE_INT BIT(7) -#define MACEPCI_SCSI0_INT BIT(8) -#define MACEPCI_SCSI1_INT BIT(9) -#define MACEPCI_SLOT0_INT BIT(10) -#define MACEPCI_SLOT1_INT BIT(11) -#define MACEPCI_SLOT2_INT BIT(12) -#define MACEPCI_SHARED0_INT BIT(13) -#define MACEPCI_SHARED1_INT BIT(14) -#define MACEPCI_SHARED2_INT BIT(15) -#define CRIME_GBE0_INT BIT(16) -#define CRIME_GBE1_INT BIT(17) -#define CRIME_GBE2_INT BIT(18) -#define CRIME_GBE3_INT BIT(19) -#define CRIME_CPUERR_INT BIT(20) -#define CRIME_MEMERR_INT BIT(21) -#define CRIME_RE_EMPTY_E_INT BIT(22) -#define CRIME_RE_FULL_E_INT BIT(23) -#define CRIME_RE_IDLE_E_INT BIT(24) -#define CRIME_RE_EMPTY_L_INT BIT(25) -#define CRIME_RE_FULL_L_INT BIT(26) -#define CRIME_RE_IDLE_L_INT BIT(27) -#define CRIME_SOFT0_INT BIT(28) -#define CRIME_SOFT1_INT BIT(29) -#define CRIME_SOFT2_INT BIT(30) -#define CRIME_SYSCORERR_INT CRIME_SOFT2_INT -#define CRIME_VICE_INT BIT(31) -/* Masks for deciding who handles the interrupt */ -#define CRIME_MACE_INT_MASK 0x8f -#define CRIME_MACEISA_INT_MASK 0x70 -#define CRIME_MACEPCI_INT_MASK 0xff00 -#define CRIME_CRIME_INT_MASK 0xffff0000 - - volatile unsigned long watchdog; -#define CRIME_DOG_POWER_ON_RESET 0x00010000 -#define CRIME_DOG_WARM_RESET 0x00080000 -#define CRIME_DOG_TIMEOUT (CRIME_DOG_POWER_ON_RESET|CRIME_DOG_WARM_RESET) -#define CRIME_DOG_VALUE 0x00007fff - - volatile unsigned long timer; -#define CRIME_MASTER_FREQ 66666500 /* Crime upcounter frequency */ -#define CRIME_NS_PER_TICK 15 /* for delay_calibrate */ - - volatile unsigned long cpu_error_addr; -#define CRIME_CPU_ERROR_ADDR_MASK 0x3ffffffff - - volatile unsigned long cpu_error_stat; -#define CRIME_CPU_ERROR_MASK 0x7 /* cpu error stat is 3 bits */ -#define CRIME_CPU_ERROR_CPU_ILL_ADDR 0x4 -#define CRIME_CPU_ERROR_VICE_WRT_PRTY 0x2 -#define CRIME_CPU_ERROR_CPU_WRT_PRTY 0x1 - - unsigned long _pad0[54]; - - volatile unsigned long mc_ctrl; - volatile unsigned long bank_ctrl[8]; -#define CRIME_MEM_BANK_CONTROL_MASK 0x11f /* 9 bits 7:5 reserved */ -#define CRIME_MEM_BANK_CONTROL_ADDR 0x01f -#define CRIME_MEM_BANK_CONTROL_SDRAM_SIZE 0x100 -#define CRIME_MAXBANKS 8 - - volatile unsigned long mem_ref_counter; -#define CRIME_MEM_REF_COUNTER_MASK 0x3ff /* 10bit */ - - volatile unsigned long mem_error_stat; -#define CRIME_MEM_ERROR_STAT_MASK 0x0ff7ffff /* 28-bit register */ -#define CRIME_MEM_ERROR_MACE_ID 0x0000007f -#define CRIME_MEM_ERROR_MACE_ACCESS 0x00000080 -#define CRIME_MEM_ERROR_RE_ID 0x00007f00 -#define CRIME_MEM_ERROR_RE_ACCESS 0x00008000 -#define CRIME_MEM_ERROR_GBE_ACCESS 0x00010000 -#define CRIME_MEM_ERROR_VICE_ACCESS 0x00020000 -#define CRIME_MEM_ERROR_CPU_ACCESS 0x00040000 -#define CRIME_MEM_ERROR_RESERVED 0x00080000 -#define CRIME_MEM_ERROR_SOFT_ERR 0x00100000 -#define CRIME_MEM_ERROR_HARD_ERR 0x00200000 -#define CRIME_MEM_ERROR_MULTIPLE 0x00400000 -#define CRIME_MEM_ERROR_ECC 0x01800000 -#define CRIME_MEM_ERROR_MEM_ECC_RD 0x00800000 -#define CRIME_MEM_ERROR_MEM_ECC_RMW 0x01000000 -#define CRIME_MEM_ERROR_INV 0x0e000000 -#define CRIME_MEM_ERROR_INV_MEM_ADDR_RD 0x02000000 -#define CRIME_MEM_ERROR_INV_MEM_ADDR_WR 0x04000000 -#define CRIME_MEM_ERROR_INV_MEM_ADDR_RMW 0x08000000 - - volatile unsigned long mem_error_addr; -#define CRIME_MEM_ERROR_ADDR_MASK 0x3fffffff - - volatile unsigned long mem_ecc_syn; -#define CRIME_MEM_ERROR_ECC_SYN_MASK 0xffffffff - - volatile unsigned long mem_ecc_chk; -#define CRIME_MEM_ERROR_ECC_CHK_MASK 0xffffffff - - volatile unsigned long mem_ecc_repl; -#define CRIME_MEM_ERROR_ECC_REPL_MASK 0xffffffff -}; - -extern struct sgi_crime __iomem *crime; - -#define CRIME_HI_MEM_BASE 0x40000000 /* this is where whole 1G of RAM is mapped */ - -#endif /* __ASM_CRIME_H__ */ diff --git a/include/asm-mips/ip32/ip32_ints.h b/include/asm-mips/ip32/ip32_ints.h deleted file mode 100644 index 85bc5302bce0..000000000000 --- a/include/asm-mips/ip32/ip32_ints.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Harald Koerfgen - */ - -#ifndef __ASM_IP32_INTS_H -#define __ASM_IP32_INTS_H - -#include - -/* - * This list reflects the assignment of interrupt numbers to - * interrupting events. Order is fairly irrelevant to handling - * priority. This differs from irix. - */ - -enum ip32_irq_no { - /* - * CPU interrupts are 0 ... 7 - */ - - CRIME_IRQ_BASE = MIPS_CPU_IRQ_BASE + 8, - - /* - * MACE - */ - MACE_VID_IN1_IRQ = CRIME_IRQ_BASE, - MACE_VID_IN2_IRQ, - MACE_VID_OUT_IRQ, - MACE_ETHERNET_IRQ, - /* SUPERIO, MISC, and AUDIO are MACEISA */ - __MACE_SUPERIO, - __MACE_MISC, - __MACE_AUDIO, - MACE_PCI_BRIDGE_IRQ, - - /* - * MACEPCI - */ - MACEPCI_SCSI0_IRQ, - MACEPCI_SCSI1_IRQ, - MACEPCI_SLOT0_IRQ, - MACEPCI_SLOT1_IRQ, - MACEPCI_SLOT2_IRQ, - MACEPCI_SHARED0_IRQ, - MACEPCI_SHARED1_IRQ, - MACEPCI_SHARED2_IRQ, - - /* - * CRIME - */ - CRIME_GBE0_IRQ, - CRIME_GBE1_IRQ, - CRIME_GBE2_IRQ, - CRIME_GBE3_IRQ, - CRIME_CPUERR_IRQ, - CRIME_MEMERR_IRQ, - CRIME_RE_EMPTY_E_IRQ, - CRIME_RE_FULL_E_IRQ, - CRIME_RE_IDLE_E_IRQ, - CRIME_RE_EMPTY_L_IRQ, - CRIME_RE_FULL_L_IRQ, - CRIME_RE_IDLE_L_IRQ, - CRIME_SOFT0_IRQ, - CRIME_SOFT1_IRQ, - CRIME_SOFT2_IRQ, - CRIME_SYSCORERR_IRQ = CRIME_SOFT2_IRQ, - CRIME_VICE_IRQ, - - /* - * MACEISA - */ - MACEISA_AUDIO_SW_IRQ, - MACEISA_AUDIO_SC_IRQ, - MACEISA_AUDIO1_DMAT_IRQ, - MACEISA_AUDIO1_OF_IRQ, - MACEISA_AUDIO2_DMAT_IRQ, - MACEISA_AUDIO2_MERR_IRQ, - MACEISA_AUDIO3_DMAT_IRQ, - MACEISA_AUDIO3_MERR_IRQ, - MACEISA_RTC_IRQ, - MACEISA_KEYB_IRQ, - /* MACEISA_KEYB_POLL is not an IRQ */ - __MACEISA_KEYB_POLL, - MACEISA_MOUSE_IRQ, - /* MACEISA_MOUSE_POLL is not an IRQ */ - __MACEISA_MOUSE_POLL, - MACEISA_TIMER0_IRQ, - MACEISA_TIMER1_IRQ, - MACEISA_TIMER2_IRQ, - MACEISA_PARALLEL_IRQ, - MACEISA_PAR_CTXA_IRQ, - MACEISA_PAR_CTXB_IRQ, - MACEISA_PAR_MERR_IRQ, - MACEISA_SERIAL1_IRQ, - MACEISA_SERIAL1_TDMAT_IRQ, - MACEISA_SERIAL1_TDMAPR_IRQ, - MACEISA_SERIAL1_TDMAME_IRQ, - MACEISA_SERIAL1_RDMAT_IRQ, - MACEISA_SERIAL1_RDMAOR_IRQ, - MACEISA_SERIAL2_IRQ, - MACEISA_SERIAL2_TDMAT_IRQ, - MACEISA_SERIAL2_TDMAPR_IRQ, - MACEISA_SERIAL2_TDMAME_IRQ, - MACEISA_SERIAL2_RDMAT_IRQ, - MACEISA_SERIAL2_RDMAOR_IRQ, - - IP32_IRQ_MAX = MACEISA_SERIAL2_RDMAOR_IRQ -}; - -#endif /* __ASM_IP32_INTS_H */ diff --git a/include/asm-mips/ip32/mace.h b/include/asm-mips/ip32/mace.h deleted file mode 100644 index d08d7c672139..000000000000 --- a/include/asm-mips/ip32/mace.h +++ /dev/null @@ -1,365 +0,0 @@ -/* - * Definitions for the SGI MACE (Multimedia, Audio and Communications Engine) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Harald Koerfgen - * Copyright (C) 2004 Ladislav Michl - */ - -#ifndef __ASM_MACE_H__ -#define __ASM_MACE_H__ - -/* - * Address map - */ -#define MACE_BASE 0x1f000000 /* physical */ - -/* - * PCI interface - */ -struct mace_pci { - volatile unsigned int error_addr; - volatile unsigned int error; -#define MACEPCI_ERROR_MASTER_ABORT BIT(31) -#define MACEPCI_ERROR_TARGET_ABORT BIT(30) -#define MACEPCI_ERROR_DATA_PARITY_ERR BIT(29) -#define MACEPCI_ERROR_RETRY_ERR BIT(28) -#define MACEPCI_ERROR_ILLEGAL_CMD BIT(27) -#define MACEPCI_ERROR_SYSTEM_ERR BIT(26) -#define MACEPCI_ERROR_INTERRUPT_TEST BIT(25) -#define MACEPCI_ERROR_PARITY_ERR BIT(24) -#define MACEPCI_ERROR_OVERRUN BIT(23) -#define MACEPCI_ERROR_RSVD BIT(22) -#define MACEPCI_ERROR_MEMORY_ADDR BIT(21) -#define MACEPCI_ERROR_CONFIG_ADDR BIT(20) -#define MACEPCI_ERROR_MASTER_ABORT_ADDR_VALID BIT(19) -#define MACEPCI_ERROR_TARGET_ABORT_ADDR_VALID BIT(18) -#define MACEPCI_ERROR_DATA_PARITY_ADDR_VALID BIT(17) -#define MACEPCI_ERROR_RETRY_ADDR_VALID BIT(16) -#define MACEPCI_ERROR_SIG_TABORT BIT(4) -#define MACEPCI_ERROR_DEVSEL_MASK 0xc0 -#define MACEPCI_ERROR_DEVSEL_FAST 0 -#define MACEPCI_ERROR_DEVSEL_MED 0x40 -#define MACEPCI_ERROR_DEVSEL_SLOW 0x80 -#define MACEPCI_ERROR_FBB BIT(1) -#define MACEPCI_ERROR_66MHZ BIT(0) - volatile unsigned int control; -#define MACEPCI_CONTROL_INT(x) BIT(x) -#define MACEPCI_CONTROL_INT_MASK 0xff -#define MACEPCI_CONTROL_SERR_ENA BIT(8) -#define MACEPCI_CONTROL_ARB_N6 BIT(9) -#define MACEPCI_CONTROL_PARITY_ERR BIT(10) -#define MACEPCI_CONTROL_MRMRA_ENA BIT(11) -#define MACEPCI_CONTROL_ARB_N3 BIT(12) -#define MACEPCI_CONTROL_ARB_N4 BIT(13) -#define MACEPCI_CONTROL_ARB_N5 BIT(14) -#define MACEPCI_CONTROL_PARK_LIU BIT(15) -#define MACEPCI_CONTROL_INV_INT(x) BIT(16+x) -#define MACEPCI_CONTROL_INV_INT_MASK 0x00ff0000 -#define MACEPCI_CONTROL_OVERRUN_INT BIT(24) -#define MACEPCI_CONTROL_PARITY_INT BIT(25) -#define MACEPCI_CONTROL_SERR_INT BIT(26) -#define MACEPCI_CONTROL_IT_INT BIT(27) -#define MACEPCI_CONTROL_RE_INT BIT(28) -#define MACEPCI_CONTROL_DPED_INT BIT(29) -#define MACEPCI_CONTROL_TAR_INT BIT(30) -#define MACEPCI_CONTROL_MAR_INT BIT(31) - volatile unsigned int rev; - unsigned int _pad[0xcf8/4 - 4]; - volatile unsigned int config_addr; - union { - volatile unsigned char b[4]; - volatile unsigned short w[2]; - volatile unsigned int l; - } config_data; -}; -#define MACEPCI_LOW_MEMORY 0x1a000000 -#define MACEPCI_LOW_IO 0x18000000 -#define MACEPCI_SWAPPED_VIEW 0 -#define MACEPCI_NATIVE_VIEW 0x40000000 -#define MACEPCI_IO 0x80000000 -#define MACEPCI_HI_MEMORY 0x280000000 -#define MACEPCI_HI_IO 0x100000000 - -/* - * Video interface - */ -struct mace_video { - unsigned long xxx; /* later... */ -}; - -/* - * Ethernet interface - */ -struct mace_ethernet { - volatile unsigned long mac_ctrl; - volatile unsigned long int_stat; - volatile unsigned long dma_ctrl; - volatile unsigned long timer; - volatile unsigned long tx_int_al; - volatile unsigned long rx_int_al; - volatile unsigned long tx_info; - volatile unsigned long tx_info_al; - volatile unsigned long rx_buff; - volatile unsigned long rx_buff_al1; - volatile unsigned long rx_buff_al2; - volatile unsigned long diag; - volatile unsigned long phy_data; - volatile unsigned long phy_regs; - volatile unsigned long phy_trans_go; - volatile unsigned long backoff_seed; - /*===================================*/ - volatile unsigned long imq_reserved[4]; - volatile unsigned long mac_addr; - volatile unsigned long mac_addr2; - volatile unsigned long mcast_filter; - volatile unsigned long tx_ring_base; - /* Following are read-only registers for debugging */ - volatile unsigned long tx_pkt1_hdr; - volatile unsigned long tx_pkt1_ptr[3]; - volatile unsigned long tx_pkt2_hdr; - volatile unsigned long tx_pkt2_ptr[3]; - /*===================================*/ - volatile unsigned long rx_fifo; -}; - -/* - * Peripherals - */ - -/* Audio registers */ -struct mace_audio { - volatile unsigned long control; - volatile unsigned long codec_control; /* codec status control */ - volatile unsigned long codec_mask; /* codec status input mask */ - volatile unsigned long codec_read; /* codec status read data */ - struct { - volatile unsigned long control; /* channel control */ - volatile unsigned long read_ptr; /* channel read pointer */ - volatile unsigned long write_ptr; /* channel write pointer */ - volatile unsigned long depth; /* channel depth */ - } chan[3]; -}; - - -/* register definitions for parallel port DMA */ -struct mace_parport { - /* 0 - do nothing, - * 1 - pulse terminal count to the device after buffer is drained */ -#define MACEPAR_CONTEXT_LASTFLAG BIT(63) - /* Should not cross 4K page boundary */ -#define MACEPAR_CONTEXT_DATA_BOUND 0x0000000000001000UL -#define MACEPAR_CONTEXT_DATALEN_MASK 0x00000fff00000000UL -#define MACEPAR_CONTEXT_DATALEN_SHIFT 32 - /* Can be arbitrarily aligned on any byte boundary on output, - * 64 byte aligned on input */ -#define MACEPAR_CONTEXT_BASEADDR_MASK 0x00000000ffffffffUL - volatile u64 context_a; - volatile u64 context_b; - /* 0 - mem->device, 1 - device->mem */ -#define MACEPAR_CTLSTAT_DIRECTION BIT(0) - /* 0 - channel frozen, 1 - channel enabled */ -#define MACEPAR_CTLSTAT_ENABLE BIT(1) - /* 0 - channel active, 1 - complete channel reset */ -#define MACEPAR_CTLSTAT_RESET BIT(2) -#define MACEPAR_CTLSTAT_CTXB_VALID BIT(3) -#define MACEPAR_CTLSTAT_CTXA_VALID BIT(4) - volatile u64 cntlstat; /* Control/Status register */ -#define MACEPAR_DIAG_CTXINUSE BIT(0) - /* 1 - Dma engine is enabled and processing something */ -#define MACEPAR_DIAG_DMACTIVE BIT(1) - /* Counter of bytes left */ -#define MACEPAR_DIAG_CTRMASK 0x0000000000003ffcUL -#define MACEPAR_DIAG_CTRSHIFT 2 - volatile u64 diagnostic; /* RO: diagnostic register */ -}; - -/* ISA Control and DMA registers */ -struct mace_isactrl { - volatile unsigned long ringbase; -#define MACEISA_RINGBUFFERS_SIZE (8 * 4096) - - volatile unsigned long misc; -#define MACEISA_FLASH_WE BIT(0) /* 1=> Enable FLASH writes */ -#define MACEISA_PWD_CLEAR BIT(1) /* 1=> PWD CLEAR jumper detected */ -#define MACEISA_NIC_DEASSERT BIT(2) -#define MACEISA_NIC_DATA BIT(3) -#define MACEISA_LED_RED BIT(4) /* 0=> Illuminate red LED */ -#define MACEISA_LED_GREEN BIT(5) /* 0=> Illuminate green LED */ -#define MACEISA_DP_RAM_ENABLE BIT(6) - - volatile unsigned long istat; - volatile unsigned long imask; -#define MACEISA_AUDIO_SW_INT BIT(0) -#define MACEISA_AUDIO_SC_INT BIT(1) -#define MACEISA_AUDIO1_DMAT_INT BIT(2) -#define MACEISA_AUDIO1_OF_INT BIT(3) -#define MACEISA_AUDIO2_DMAT_INT BIT(4) -#define MACEISA_AUDIO2_MERR_INT BIT(5) -#define MACEISA_AUDIO3_DMAT_INT BIT(6) -#define MACEISA_AUDIO3_MERR_INT BIT(7) -#define MACEISA_RTC_INT BIT(8) -#define MACEISA_KEYB_INT BIT(9) -#define MACEISA_KEYB_POLL_INT BIT(10) -#define MACEISA_MOUSE_INT BIT(11) -#define MACEISA_MOUSE_POLL_INT BIT(12) -#define MACEISA_TIMER0_INT BIT(13) -#define MACEISA_TIMER1_INT BIT(14) -#define MACEISA_TIMER2_INT BIT(15) -#define MACEISA_PARALLEL_INT BIT(16) -#define MACEISA_PAR_CTXA_INT BIT(17) -#define MACEISA_PAR_CTXB_INT BIT(18) -#define MACEISA_PAR_MERR_INT BIT(19) -#define MACEISA_SERIAL1_INT BIT(20) -#define MACEISA_SERIAL1_TDMAT_INT BIT(21) -#define MACEISA_SERIAL1_TDMAPR_INT BIT(22) -#define MACEISA_SERIAL1_TDMAME_INT BIT(23) -#define MACEISA_SERIAL1_RDMAT_INT BIT(24) -#define MACEISA_SERIAL1_RDMAOR_INT BIT(25) -#define MACEISA_SERIAL2_INT BIT(26) -#define MACEISA_SERIAL2_TDMAT_INT BIT(27) -#define MACEISA_SERIAL2_TDMAPR_INT BIT(28) -#define MACEISA_SERIAL2_TDMAME_INT BIT(29) -#define MACEISA_SERIAL2_RDMAT_INT BIT(30) -#define MACEISA_SERIAL2_RDMAOR_INT BIT(31) - - volatile unsigned long _pad[0x2000/8 - 4]; - - volatile unsigned long dp_ram[0x400]; - struct mace_parport parport; -}; - -/* Keyboard & Mouse registers - * -> drivers/input/serio/maceps2.c */ -struct mace_ps2port { - volatile unsigned long tx; - volatile unsigned long rx; - volatile unsigned long control; - volatile unsigned long status; -}; - -struct mace_ps2 { - struct mace_ps2port keyb; - struct mace_ps2port mouse; -}; - -/* I2C registers - * -> drivers/i2c/algos/i2c-algo-sgi.c */ -struct mace_i2c { - volatile unsigned long config; -#define MACEI2C_RESET BIT(0) -#define MACEI2C_FAST BIT(1) -#define MACEI2C_DATA_OVERRIDE BIT(2) -#define MACEI2C_CLOCK_OVERRIDE BIT(3) -#define MACEI2C_DATA_STATUS BIT(4) -#define MACEI2C_CLOCK_STATUS BIT(5) - volatile unsigned long control; - volatile unsigned long data; -}; - -/* Timer registers */ -typedef union { - volatile unsigned long ust_msc; - struct reg { - volatile unsigned int ust; - volatile unsigned int msc; - } reg; -} timer_reg; - -struct mace_timers { - volatile unsigned long ust; -#define MACE_UST_PERIOD_NS 960 - - volatile unsigned long compare1; - volatile unsigned long compare2; - volatile unsigned long compare3; - - timer_reg audio_in; - timer_reg audio_out1; - timer_reg audio_out2; - timer_reg video_in1; - timer_reg video_in2; - timer_reg video_out; -}; - -struct mace_perif { - struct mace_audio audio; - char _pad0[0x10000 - sizeof(struct mace_audio)]; - - struct mace_isactrl ctrl; - char _pad1[0x10000 - sizeof(struct mace_isactrl)]; - - struct mace_ps2 ps2; - char _pad2[0x10000 - sizeof(struct mace_ps2)]; - - struct mace_i2c i2c; - char _pad3[0x10000 - sizeof(struct mace_i2c)]; - - struct mace_timers timers; - char _pad4[0x10000 - sizeof(struct mace_timers)]; -}; - - -/* - * ISA peripherals - */ - -/* Parallel port */ -struct mace_parallel { -}; - -struct mace_ecp1284 { /* later... */ -}; - -/* Serial port */ -struct mace_serial { - volatile unsigned long xxx; /* later... */ -}; - -struct mace_isa { - struct mace_parallel parallel; - char _pad1[0x8000 - sizeof(struct mace_parallel)]; - - struct mace_ecp1284 ecp1284; - char _pad2[0x8000 - sizeof(struct mace_ecp1284)]; - - struct mace_serial serial1; - char _pad3[0x8000 - sizeof(struct mace_serial)]; - - struct mace_serial serial2; - char _pad4[0x8000 - sizeof(struct mace_serial)]; - - volatile unsigned char rtc[0x10000]; -}; - -struct sgi_mace { - char _reserved[0x80000]; - - struct mace_pci pci; - char _pad0[0x80000 - sizeof(struct mace_pci)]; - - struct mace_video video_in1; - char _pad1[0x80000 - sizeof(struct mace_video)]; - - struct mace_video video_in2; - char _pad2[0x80000 - sizeof(struct mace_video)]; - - struct mace_video video_out; - char _pad3[0x80000 - sizeof(struct mace_video)]; - - struct mace_ethernet eth; - char _pad4[0x80000 - sizeof(struct mace_ethernet)]; - - struct mace_perif perif; - char _pad5[0x80000 - sizeof(struct mace_perif)]; - - struct mace_isa isa; - char _pad6[0x80000 - sizeof(struct mace_isa)]; -}; - -extern struct sgi_mace __iomem *mace; - -#endif /* __ASM_MACE_H__ */ diff --git a/include/asm-mips/ipcbuf.h b/include/asm-mips/ipcbuf.h deleted file mode 100644 index d47d08f264e7..000000000000 --- a/include/asm-mips/ipcbuf.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef _ASM_IPCBUF_H -#define _ASM_IPCBUF_H - -/* - * The ipc64_perm structure for alpha architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit seq - * - 2 miscellaneous 64-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_uid_t cuid; - __kernel_gid_t cgid; - __kernel_mode_t mode; - unsigned short seq; - unsigned short __pad1; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_IPCBUF_H */ diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h deleted file mode 100644 index a58f0eecc68f..000000000000 --- a/include/asm-mips/irq.h +++ /dev/null @@ -1,163 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle - * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle - */ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -#include - -#include - -#include - -#ifdef CONFIG_I8259 -static inline int irq_canonicalize(int irq) -{ - return ((irq == I8259A_IRQ_BASE + 2) ? I8259A_IRQ_BASE + 9 : irq); -} -#else -#define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */ -#endif - -#ifdef CONFIG_MIPS_MT_SMTC - -struct irqaction; - -extern unsigned long irq_hwmask[]; -extern int setup_irq_smtc(unsigned int irq, struct irqaction * new, - unsigned long hwmask); - -static inline void smtc_im_ack_irq(unsigned int irq) -{ - if (irq_hwmask[irq] & ST0_IM) - set_c0_status(irq_hwmask[irq] & ST0_IM); -} - -#else - -static inline void smtc_im_ack_irq(unsigned int irq) -{ -} - -#endif /* CONFIG_MIPS_MT_SMTC */ - -#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF -#include - -extern void plat_set_irq_affinity(unsigned int irq, cpumask_t affinity); -extern void smtc_forward_irq(unsigned int irq); - -/* - * IRQ affinity hook invoked at the beginning of interrupt dispatch - * if option is enabled. - * - * Up through Linux 2.6.22 (at least) cpumask operations are very - * inefficient on MIPS. Initial prototypes of SMTC IRQ affinity - * used a "fast path" per-IRQ-descriptor cache of affinity information - * to reduce latency. As there is a project afoot to optimize the - * cpumask implementations, this version is optimistically assuming - * that cpumask.h macro overhead is reasonable during interrupt dispatch. - */ -#define IRQ_AFFINITY_HOOK(irq) \ -do { \ - if (!cpu_isset(smp_processor_id(), irq_desc[irq].affinity)) { \ - smtc_forward_irq(irq); \ - irq_exit(); \ - return; \ - } \ -} while (0) - -#else /* Not doing SMTC affinity */ - -#define IRQ_AFFINITY_HOOK(irq) do { } while (0) - -#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ - -#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP - -/* - * Clear interrupt mask handling "backstop" if irq_hwmask - * entry so indicates. This implies that the ack() or end() - * functions will take over re-enabling the low-level mask. - * Otherwise it will be done on return from exception. - */ -#define __DO_IRQ_SMTC_HOOK(irq) \ -do { \ - IRQ_AFFINITY_HOOK(irq); \ - if (irq_hwmask[irq] & 0x0000ff00) \ - write_c0_tccontext(read_c0_tccontext() & \ - ~(irq_hwmask[irq] & 0x0000ff00)); \ -} while (0) - -#define __NO_AFFINITY_IRQ_SMTC_HOOK(irq) \ -do { \ - if (irq_hwmask[irq] & 0x0000ff00) \ - write_c0_tccontext(read_c0_tccontext() & \ - ~(irq_hwmask[irq] & 0x0000ff00)); \ -} while (0) - -#else - -#define __DO_IRQ_SMTC_HOOK(irq) \ -do { \ - IRQ_AFFINITY_HOOK(irq); \ -} while (0) -#define __NO_AFFINITY_IRQ_SMTC_HOOK(irq) do { } while (0) - -#endif - -/* - * do_IRQ handles all normal device IRQ's (the special - * SMP cross-CPU interrupts have their own specific - * handlers). - * - * Ideally there should be away to get this into kernel/irq/handle.c to - * avoid the overhead of a call for just a tiny function ... - */ -#define do_IRQ(irq) \ -do { \ - irq_enter(); \ - __DO_IRQ_SMTC_HOOK(irq); \ - generic_handle_irq(irq); \ - irq_exit(); \ -} while (0) - -#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF -/* - * To avoid inefficient and in some cases pathological re-checking of - * IRQ affinity, we have this variant that skips the affinity check. - */ - - -#define do_IRQ_no_affinity(irq) \ -do { \ - irq_enter(); \ - __NO_AFFINITY_IRQ_SMTC_HOOK(irq); \ - generic_handle_irq(irq); \ - irq_exit(); \ -} while (0) - -#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ - -extern void arch_init_irq(void); -extern void spurious_interrupt(void); - -extern int allocate_irqno(void); -extern void alloc_legacy_irqno(void); -extern void free_irqno(unsigned int irq); - -/* - * Before R2 the timer and performance counter interrupts were both fixed to - * IE7. Since R2 their number has to be read from the c0_intctl register. - */ -#define CP0_LEGACY_COMPARE_IRQ 7 - -extern int cp0_compare_irq; -extern int cp0_perfcount_irq; - -#endif /* _ASM_IRQ_H */ diff --git a/include/asm-mips/irq_cpu.h b/include/asm-mips/irq_cpu.h deleted file mode 100644 index ef6a07cddb23..000000000000 --- a/include/asm-mips/irq_cpu.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-mips/irq_cpu.h - * - * MIPS CPU interrupt definitions. - * - * Copyright (C) 2002 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_IRQ_CPU_H -#define _ASM_IRQ_CPU_H - -extern void mips_cpu_irq_init(void); -extern void rm7k_cpu_irq_init(void); -extern void rm9k_cpu_irq_init(void); - -#endif /* _ASM_IRQ_CPU_H */ diff --git a/include/asm-mips/irq_gt641xx.h b/include/asm-mips/irq_gt641xx.h deleted file mode 100644 index f9a7c3ac2e66..000000000000 --- a/include/asm-mips/irq_gt641xx.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Galileo/Marvell GT641xx IRQ definitions. - * - * Copyright (C) 2007 Yoichi Yuasa - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - */ -#ifndef _ASM_IRQ_GT641XX_H -#define _ASM_IRQ_GT641XX_H - -#ifndef GT641XX_IRQ_BASE -#define GT641XX_IRQ_BASE 8 -#endif - -#define GT641XX_MEMORY_OUT_OF_RANGE_IRQ (GT641XX_IRQ_BASE + 1) -#define GT641XX_DMA_OUT_OF_RANGE_IRQ (GT641XX_IRQ_BASE + 2) -#define GT641XX_CPU_ACCESS_OUT_OF_RANGE_IRQ (GT641XX_IRQ_BASE + 3) -#define GT641XX_DMA0_IRQ (GT641XX_IRQ_BASE + 4) -#define GT641XX_DMA1_IRQ (GT641XX_IRQ_BASE + 5) -#define GT641XX_DMA2_IRQ (GT641XX_IRQ_BASE + 6) -#define GT641XX_DMA3_IRQ (GT641XX_IRQ_BASE + 7) -#define GT641XX_TIMER0_IRQ (GT641XX_IRQ_BASE + 8) -#define GT641XX_TIMER1_IRQ (GT641XX_IRQ_BASE + 9) -#define GT641XX_TIMER2_IRQ (GT641XX_IRQ_BASE + 10) -#define GT641XX_TIMER3_IRQ (GT641XX_IRQ_BASE + 11) -#define GT641XX_PCI_0_MASTER_READ_ERROR_IRQ (GT641XX_IRQ_BASE + 12) -#define GT641XX_PCI_0_SLAVE_WRITE_ERROR_IRQ (GT641XX_IRQ_BASE + 13) -#define GT641XX_PCI_0_MASTER_WRITE_ERROR_IRQ (GT641XX_IRQ_BASE + 14) -#define GT641XX_PCI_0_SLAVE_READ_ERROR_IRQ (GT641XX_IRQ_BASE + 15) -#define GT641XX_PCI_0_ADDRESS_ERROR_IRQ (GT641XX_IRQ_BASE + 16) -#define GT641XX_MEMORY_ERROR_IRQ (GT641XX_IRQ_BASE + 17) -#define GT641XX_PCI_0_MASTER_ABORT_IRQ (GT641XX_IRQ_BASE + 18) -#define GT641XX_PCI_0_TARGET_ABORT_IRQ (GT641XX_IRQ_BASE + 19) -#define GT641XX_PCI_0_RETRY_TIMEOUT_IRQ (GT641XX_IRQ_BASE + 20) -#define GT641XX_CPU_INT0_IRQ (GT641XX_IRQ_BASE + 21) -#define GT641XX_CPU_INT1_IRQ (GT641XX_IRQ_BASE + 22) -#define GT641XX_CPU_INT2_IRQ (GT641XX_IRQ_BASE + 23) -#define GT641XX_CPU_INT3_IRQ (GT641XX_IRQ_BASE + 24) -#define GT641XX_CPU_INT4_IRQ (GT641XX_IRQ_BASE + 25) -#define GT641XX_PCI_INT0_IRQ (GT641XX_IRQ_BASE + 26) -#define GT641XX_PCI_INT1_IRQ (GT641XX_IRQ_BASE + 27) -#define GT641XX_PCI_INT2_IRQ (GT641XX_IRQ_BASE + 28) -#define GT641XX_PCI_INT3_IRQ (GT641XX_IRQ_BASE + 29) - -extern void gt641xx_irq_dispatch(void); -extern void gt641xx_irq_init(void); - -#endif /* _ASM_IRQ_GT641XX_H */ diff --git a/include/asm-mips/irq_regs.h b/include/asm-mips/irq_regs.h deleted file mode 100644 index 33bd2a06de57..000000000000 --- a/include/asm-mips/irq_regs.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_IRQ_REGS_H -#define __ASM_IRQ_REGS_H - -#define ARCH_HAS_OWN_IRQ_REGS - -#include - -static inline struct pt_regs *get_irq_regs(void) -{ - return current_thread_info()->regs; -} - -#endif /* __ASM_IRQ_REGS_H */ diff --git a/include/asm-mips/irqflags.h b/include/asm-mips/irqflags.h deleted file mode 100644 index 701ec0ba8fa9..000000000000 --- a/include/asm-mips/irqflags.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle - * Copyright (C) 1996 by Paul M. Antoine - * Copyright (C) 1999 Silicon Graphics - * Copyright (C) 2000 MIPS Technologies, Inc. - */ -#ifndef _ASM_IRQFLAGS_H -#define _ASM_IRQFLAGS_H - -#ifndef __ASSEMBLY__ - -#include -#include - -__asm__( - " .macro raw_local_irq_enable \n" - " .set push \n" - " .set reorder \n" - " .set noat \n" -#ifdef CONFIG_MIPS_MT_SMTC - " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n" - " ori $1, 0x400 \n" - " xori $1, 0x400 \n" - " mtc0 $1, $2, 1 \n" -#elif defined(CONFIG_CPU_MIPSR2) - " ei \n" -#else - " mfc0 $1,$12 \n" - " ori $1,0x1f \n" - " xori $1,0x1e \n" - " mtc0 $1,$12 \n" -#endif - " irq_enable_hazard \n" - " .set pop \n" - " .endm"); - -extern void smtc_ipi_replay(void); - -static inline void raw_local_irq_enable(void) -{ -#ifdef CONFIG_MIPS_MT_SMTC - /* - * SMTC kernel needs to do a software replay of queued - * IPIs, at the cost of call overhead on each local_irq_enable() - */ - smtc_ipi_replay(); -#endif - __asm__ __volatile__( - "raw_local_irq_enable" - : /* no outputs */ - : /* no inputs */ - : "memory"); -} - - -/* - * For cli() we have to insert nops to make sure that the new value - * has actually arrived in the status register before the end of this - * macro. - * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs - * no nops at all. - */ -/* - * For TX49, operating only IE bit is not enough. - * - * If mfc0 $12 follows store and the mfc0 is last instruction of a - * page and fetching the next instruction causes TLB miss, the result - * of the mfc0 might wrongly contain EXL bit. - * - * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008 - * - * Workaround: mask EXL bit of the result or place a nop before mfc0. - */ -__asm__( - " .macro raw_local_irq_disable\n" - " .set push \n" - " .set noat \n" -#ifdef CONFIG_MIPS_MT_SMTC - " mfc0 $1, $2, 1 \n" - " ori $1, 0x400 \n" - " .set noreorder \n" - " mtc0 $1, $2, 1 \n" -#elif defined(CONFIG_CPU_MIPSR2) - " di \n" -#else - " mfc0 $1,$12 \n" - " ori $1,0x1f \n" - " xori $1,0x1f \n" - " .set noreorder \n" - " mtc0 $1,$12 \n" -#endif - " irq_disable_hazard \n" - " .set pop \n" - " .endm \n"); - -static inline void raw_local_irq_disable(void) -{ - __asm__ __volatile__( - "raw_local_irq_disable" - : /* no outputs */ - : /* no inputs */ - : "memory"); -} - -__asm__( - " .macro raw_local_save_flags flags \n" - " .set push \n" - " .set reorder \n" -#ifdef CONFIG_MIPS_MT_SMTC - " mfc0 \\flags, $2, 1 \n" -#else - " mfc0 \\flags, $12 \n" -#endif - " .set pop \n" - " .endm \n"); - -#define raw_local_save_flags(x) \ -__asm__ __volatile__( \ - "raw_local_save_flags %0" \ - : "=r" (x)) - -__asm__( - " .macro raw_local_irq_save result \n" - " .set push \n" - " .set reorder \n" - " .set noat \n" -#ifdef CONFIG_MIPS_MT_SMTC - " mfc0 \\result, $2, 1 \n" - " ori $1, \\result, 0x400 \n" - " .set noreorder \n" - " mtc0 $1, $2, 1 \n" - " andi \\result, \\result, 0x400 \n" -#elif defined(CONFIG_CPU_MIPSR2) - " di \\result \n" - " andi \\result, 1 \n" -#else - " mfc0 \\result, $12 \n" - " ori $1, \\result, 0x1f \n" - " xori $1, 0x1f \n" - " .set noreorder \n" - " mtc0 $1, $12 \n" -#endif - " irq_disable_hazard \n" - " .set pop \n" - " .endm \n"); - -#define raw_local_irq_save(x) \ -__asm__ __volatile__( \ - "raw_local_irq_save\t%0" \ - : "=r" (x) \ - : /* no inputs */ \ - : "memory") - -__asm__( - " .macro raw_local_irq_restore flags \n" - " .set push \n" - " .set noreorder \n" - " .set noat \n" -#ifdef CONFIG_MIPS_MT_SMTC - "mfc0 $1, $2, 1 \n" - "andi \\flags, 0x400 \n" - "ori $1, 0x400 \n" - "xori $1, 0x400 \n" - "or \\flags, $1 \n" - "mtc0 \\flags, $2, 1 \n" -#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU) - /* - * Slow, but doesn't suffer from a relativly unlikely race - * condition we're having since days 1. - */ - " beqz \\flags, 1f \n" - " di \n" - " ei \n" - "1: \n" -#elif defined(CONFIG_CPU_MIPSR2) - /* - * Fast, dangerous. Life is fun, life is good. - */ - " mfc0 $1, $12 \n" - " ins $1, \\flags, 0, 1 \n" - " mtc0 $1, $12 \n" -#else - " mfc0 $1, $12 \n" - " andi \\flags, 1 \n" - " ori $1, 0x1f \n" - " xori $1, 0x1f \n" - " or \\flags, $1 \n" - " mtc0 \\flags, $12 \n" -#endif - " irq_disable_hazard \n" - " .set pop \n" - " .endm \n"); - - -static inline void raw_local_irq_restore(unsigned long flags) -{ - unsigned long __tmp1; - -#ifdef CONFIG_MIPS_MT_SMTC - /* - * SMTC kernel needs to do a software replay of queued - * IPIs, at the cost of branch and call overhead on each - * local_irq_restore() - */ - if (unlikely(!(flags & 0x0400))) - smtc_ipi_replay(); -#endif - - __asm__ __volatile__( - "raw_local_irq_restore\t%0" - : "=r" (__tmp1) - : "0" (flags) - : "memory"); -} - -static inline void __raw_local_irq_restore(unsigned long flags) -{ - unsigned long __tmp1; - - __asm__ __volatile__( - "raw_local_irq_restore\t%0" - : "=r" (__tmp1) - : "0" (flags) - : "memory"); -} - -static inline int raw_irqs_disabled_flags(unsigned long flags) -{ -#ifdef CONFIG_MIPS_MT_SMTC - /* - * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU - */ - return flags & 0x400; -#else - return !(flags & 1); -#endif -} - -#endif - -/* - * Do the CPU's IRQ-state tracing from assembly code. - */ -#ifdef CONFIG_TRACE_IRQFLAGS -/* Reload some registers clobbered by trace_hardirqs_on */ -#ifdef CONFIG_64BIT -# define TRACE_IRQS_RELOAD_REGS \ - LONG_L $11, PT_R11(sp); \ - LONG_L $10, PT_R10(sp); \ - LONG_L $9, PT_R9(sp); \ - LONG_L $8, PT_R8(sp); \ - LONG_L $7, PT_R7(sp); \ - LONG_L $6, PT_R6(sp); \ - LONG_L $5, PT_R5(sp); \ - LONG_L $4, PT_R4(sp); \ - LONG_L $2, PT_R2(sp) -#else -# define TRACE_IRQS_RELOAD_REGS \ - LONG_L $7, PT_R7(sp); \ - LONG_L $6, PT_R6(sp); \ - LONG_L $5, PT_R5(sp); \ - LONG_L $4, PT_R4(sp); \ - LONG_L $2, PT_R2(sp) -#endif -# define TRACE_IRQS_ON \ - CLI; /* make sure trace_hardirqs_on() is called in kernel level */ \ - jal trace_hardirqs_on -# define TRACE_IRQS_ON_RELOAD \ - TRACE_IRQS_ON; \ - TRACE_IRQS_RELOAD_REGS -# define TRACE_IRQS_OFF \ - jal trace_hardirqs_off -#else -# define TRACE_IRQS_ON -# define TRACE_IRQS_ON_RELOAD -# define TRACE_IRQS_OFF -#endif - -#endif /* _ASM_IRQFLAGS_H */ diff --git a/include/asm-mips/isadep.h b/include/asm-mips/isadep.h deleted file mode 100644 index 24c6cda79377..000000000000 --- a/include/asm-mips/isadep.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Various ISA level dependent constants. - * Most of the following constants reflect the different layout - * of Coprocessor 0 registers. - * - * Copyright (c) 1998 Harald Koerfgen - */ - -#ifndef __ASM_ISADEP_H -#define __ASM_ISADEP_H - -#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) -/* - * R2000 or R3000 - */ - -/* - * kernel or user mode? (CP0_STATUS) - */ -#define KU_MASK 0x08 -#define KU_USER 0x08 -#define KU_KERN 0x00 - -#else -/* - * kernel or user mode? - */ -#define KU_MASK 0x18 -#define KU_USER 0x10 -#define KU_KERN 0x00 - -#endif - -#endif /* __ASM_ISADEP_H */ diff --git a/include/asm-mips/jazz.h b/include/asm-mips/jazz.h deleted file mode 100644 index 83f449dec95e..000000000000 --- a/include/asm-mips/jazz.h +++ /dev/null @@ -1,310 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle - */ -#ifndef __ASM_JAZZ_H -#define __ASM_JAZZ_H - -/* - * The addresses below are virtual address. The mappings are - * created on startup via wired entries in the tlb. The Mips - * Magnum R3000 and R4000 machines are similar in many aspects, - * but many hardware register are accessible at 0xb9000000 in - * instead of 0xe0000000. - */ - -#define JAZZ_LOCAL_IO_SPACE 0xe0000000 - -/* - * Revision numbers in PICA_ASIC_REVISION - * - * 0xf0000000 - Rev1 - * 0xf0000001 - Rev2 - * 0xf0000002 - Rev3 - */ -#define PICA_ASIC_REVISION 0xe0000008 - -/* - * The segments of the seven segment LED are mapped - * to the control bits as follows: - * - * (7) - * --------- - * | | - * (2) | | (6) - * | (1) | - * --------- - * | | - * (3) | | (5) - * | (4) | - * --------- . (0) - */ -#define PICA_LED 0xe000f000 - -/* - * Some characters for the LED control registers - * The original Mips machines seem to have a LED display - * with integrated decoder while the Acer machines can - * control each of the seven segments and the dot independently. - * It's only a toy, anyway... - */ -#define LED_DOT 0x01 -#define LED_SPACE 0x00 -#define LED_0 0xfc -#define LED_1 0x60 -#define LED_2 0xda -#define LED_3 0xf2 -#define LED_4 0x66 -#define LED_5 0xb6 -#define LED_6 0xbe -#define LED_7 0xe0 -#define LED_8 0xfe -#define LED_9 0xf6 -#define LED_A 0xee -#define LED_b 0x3e -#define LED_C 0x9c -#define LED_d 0x7a -#define LED_E 0x9e -#define LED_F 0x8e - -#ifndef __ASSEMBLY__ - -static __inline__ void pica_set_led(unsigned int bits) -{ - volatile unsigned int *led_register = (unsigned int *) PICA_LED; - - *led_register = bits; -} - -#endif /* !__ASSEMBLY__ */ - -/* - * Base address of the Sonic Ethernet adapter in Jazz machines. - */ -#define JAZZ_ETHERNET_BASE 0xe0001000 - -/* - * Base address of the 53C94 SCSI hostadapter in Jazz machines. - */ -#define JAZZ_SCSI_BASE 0xe0002000 - -/* - * i8042 keyboard controller for JAZZ and PICA chipsets. - * This address is just a guess and seems to differ from - * other mips machines such as RC3xxx... - */ -#define JAZZ_KEYBOARD_ADDRESS 0xe0005000 -#define JAZZ_KEYBOARD_DATA 0xe0005000 -#define JAZZ_KEYBOARD_COMMAND 0xe0005001 - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned char data; - unsigned char command; -} jazz_keyboard_hardware; - -#define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS) - -typedef struct { - unsigned char pad0[3]; - unsigned char data; - unsigned char pad1[3]; - unsigned char command; -} mips_keyboard_hardware; - -/* - * For now. Needs to be changed for RC3xxx support. See below. - */ -#define keyboard_hardware jazz_keyboard_hardware - -#endif /* !__ASSEMBLY__ */ - -/* - * i8042 keyboard controller for most other Mips machines. - */ -#define MIPS_KEYBOARD_ADDRESS 0xb9005000 -#define MIPS_KEYBOARD_DATA 0xb9005003 -#define MIPS_KEYBOARD_COMMAND 0xb9005007 - -/* - * Serial and parallel ports (WD 16C552) on the Mips JAZZ - */ -#define JAZZ_SERIAL1_BASE (unsigned int)0xe0006000 -#define JAZZ_SERIAL2_BASE (unsigned int)0xe0007000 -#define JAZZ_PARALLEL_BASE (unsigned int)0xe0008000 - -/* - * Dummy Device Address. Used in jazzdma.c - */ -#define JAZZ_DUMMY_DEVICE 0xe000d000 - -/* - * JAZZ timer registers and interrupt no. - * Note that the hardware timer interrupt is actually on - * cpu level 6, but to keep compatibility with PC stuff - * it is remapped to vector 0. See arch/mips/kernel/entry.S. - */ -#define JAZZ_TIMER_INTERVAL 0xe0000228 -#define JAZZ_TIMER_REGISTER 0xe0000230 - -/* - * DRAM configuration register - */ -#ifndef __ASSEMBLY__ -#ifdef __MIPSEL__ -typedef struct { - unsigned int bank2 : 3; - unsigned int bank1 : 3; - unsigned int mem_bus_width : 1; - unsigned int reserved2 : 1; - unsigned int page_mode : 1; - unsigned int reserved1 : 23; -} dram_configuration; -#else /* defined (__MIPSEB__) */ -typedef struct { - unsigned int reserved1 : 23; - unsigned int page_mode : 1; - unsigned int reserved2 : 1; - unsigned int mem_bus_width : 1; - unsigned int bank1 : 3; - unsigned int bank2 : 3; -} dram_configuration; -#endif -#endif /* !__ASSEMBLY__ */ - -#define PICA_DRAM_CONFIG 0xe00fffe0 - -/* - * JAZZ interrupt control registers - */ -#define JAZZ_IO_IRQ_SOURCE 0xe0010000 -#define JAZZ_IO_IRQ_ENABLE 0xe0010002 - -/* - * JAZZ Interrupt Level definitions - * - * This is somewhat broken. For reasons which nobody can remember anymore - * we remap the Jazz interrupts to the usual ISA style interrupt numbers. - */ -#define JAZZ_IRQ_START 24 -#define JAZZ_IRQ_END (24 + 9) -#define JAZZ_PARALLEL_IRQ (JAZZ_IRQ_START + 0) -#define JAZZ_FLOPPY_IRQ (JAZZ_IRQ_START + 1) -#define JAZZ_SOUND_IRQ (JAZZ_IRQ_START + 2) -#define JAZZ_VIDEO_IRQ (JAZZ_IRQ_START + 3) -#define JAZZ_ETHERNET_IRQ (JAZZ_IRQ_START + 4) -#define JAZZ_SCSI_IRQ (JAZZ_IRQ_START + 5) -#define JAZZ_KEYBOARD_IRQ (JAZZ_IRQ_START + 6) -#define JAZZ_MOUSE_IRQ (JAZZ_IRQ_START + 7) -#define JAZZ_SERIAL1_IRQ (JAZZ_IRQ_START + 8) -#define JAZZ_SERIAL2_IRQ (JAZZ_IRQ_START + 9) - -#define JAZZ_TIMER_IRQ (MIPS_CPU_IRQ_BASE+6) - - -/* - * JAZZ DMA Channels - * Note: Channels 4...7 are not used with respect to the Acer PICA-61 - * chipset which does not provide these DMA channels. - */ -#define JAZZ_SCSI_DMA 0 /* SCSI */ -#define JAZZ_FLOPPY_DMA 1 /* FLOPPY */ -#define JAZZ_AUDIOL_DMA 2 /* AUDIO L */ -#define JAZZ_AUDIOR_DMA 3 /* AUDIO R */ - -/* - * JAZZ R4030 MCT_ADR chip (DMA controller) - * Note: Virtual Addresses ! - */ -#define JAZZ_R4030_CONFIG 0xE0000000 /* R4030 config register */ -#define JAZZ_R4030_REVISION 0xE0000008 /* same as PICA_ASIC_REVISION */ -#define JAZZ_R4030_INV_ADDR 0xE0000010 /* Invalid Address register */ - -#define JAZZ_R4030_TRSTBL_BASE 0xE0000018 /* Translation Table Base */ -#define JAZZ_R4030_TRSTBL_LIM 0xE0000020 /* Translation Table Limit */ -#define JAZZ_R4030_TRSTBL_INV 0xE0000028 /* Translation Table Invalidate */ - -#define JAZZ_R4030_CACHE_MTNC 0xE0000030 /* Cache Maintenance */ -#define JAZZ_R4030_R_FAIL_ADDR 0xE0000038 /* Remote Failed Address */ -#define JAZZ_R4030_M_FAIL_ADDR 0xE0000040 /* Memory Failed Address */ - -#define JAZZ_R4030_CACHE_PTAG 0xE0000048 /* I/O Cache Physical Tag */ -#define JAZZ_R4030_CACHE_LTAG 0xE0000050 /* I/O Cache Logical Tag */ -#define JAZZ_R4030_CACHE_BMASK 0xE0000058 /* I/O Cache Byte Mask */ -#define JAZZ_R4030_CACHE_BWIN 0xE0000060 /* I/O Cache Buffer Window */ - -/* - * Remote Speed Registers. - * - * 0: free, 1: Ethernet, 2: SCSI, 3: Floppy, - * 4: RTC, 5: Kb./Mouse 6: serial 1, 7: serial 2, - * 8: parallel, 9: NVRAM, 10: CPU, 11: PROM, - * 12: reserved, 13: free, 14: 7seg LED, 15: ??? - */ -#define JAZZ_R4030_REM_SPEED 0xE0000070 /* 16 Remote Speed Registers */ - /* 0xE0000070,78,80... 0xE00000E8 */ -#define JAZZ_R4030_IRQ_ENABLE 0xE00000E8 /* Internal Interrupt Enable */ -#define JAZZ_R4030_INVAL_ADDR 0xE0000010 /* Invalid address Register */ -#define JAZZ_R4030_IRQ_SOURCE 0xE0000200 /* Interrupt Source Register */ -#define JAZZ_R4030_I386_ERROR 0xE0000208 /* i386/EISA Bus Error */ - -/* - * Virtual (E)ISA controller address - */ -#define JAZZ_EISA_IRQ_ACK 0xE0000238 /* EISA interrupt acknowledge */ - -/* - * Access the R4030 DMA and I/O Controller - */ -#ifndef __ASSEMBLY__ - -static inline void r4030_delay(void) -{ -__asm__ __volatile__( - ".set\tnoreorder\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - ".set\treorder"); -} - -static inline unsigned short r4030_read_reg16(unsigned long addr) -{ - unsigned short ret = *((volatile unsigned short *)addr); - r4030_delay(); - return ret; -} - -static inline unsigned int r4030_read_reg32(unsigned long addr) -{ - unsigned int ret = *((volatile unsigned int *)addr); - r4030_delay(); - return ret; -} - -static inline void r4030_write_reg16(unsigned long addr, unsigned val) -{ - *((volatile unsigned short *)addr) = val; - r4030_delay(); -} - -static inline void r4030_write_reg32(unsigned long addr, unsigned val) -{ - *((volatile unsigned int *)addr) = val; - r4030_delay(); -} - -#endif /* !__ASSEMBLY__ */ - -#define JAZZ_FDC_BASE 0xe0003000 -#define JAZZ_RTC_BASE 0xe0004000 -#define JAZZ_PORT_BASE 0xe2000000 - -#define JAZZ_EISA_BASE 0xe3000000 - -#endif /* __ASM_JAZZ_H */ diff --git a/include/asm-mips/jazzdma.h b/include/asm-mips/jazzdma.h deleted file mode 100644 index 8bb37bba68f0..000000000000 --- a/include/asm-mips/jazzdma.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Helpfile for jazzdma.c -- Mips Jazz R4030 DMA controller support - */ -#ifndef _ASM_JAZZDMA_H -#define _ASM_JAZZDMA_H - -/* - * Prototypes and macros - */ -extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size); -extern int vdma_free(unsigned long laddr); -extern int vdma_remap(unsigned long laddr, unsigned long paddr, - unsigned long size); -extern unsigned long vdma_phys2log(unsigned long paddr); -extern unsigned long vdma_log2phys(unsigned long laddr); -extern void vdma_stats(void); /* for debugging only */ - -extern void vdma_enable(int channel); -extern void vdma_disable(int channel); -extern void vdma_set_mode(int channel, int mode); -extern void vdma_set_addr(int channel, long addr); -extern void vdma_set_count(int channel, int count); -extern int vdma_get_residue(int channel); -extern int vdma_get_enable(int channel); - -/* - * some definitions used by the driver functions - */ -#define VDMA_PAGESIZE 4096 -#define VDMA_PGTBL_ENTRIES 4096 -#define VDMA_PGTBL_SIZE (sizeof(VDMA_PGTBL_ENTRY) * VDMA_PGTBL_ENTRIES) -#define VDMA_PAGE_EMPTY 0xff000000 - -/* - * Macros to get page no. and offset of a given address - * Note that VDMA_PAGE() works for physical addresses only - */ -#define VDMA_PAGE(a) ((unsigned int)(a) >> 12) -#define VDMA_OFFSET(a) ((unsigned int)(a) & (VDMA_PAGESIZE-1)) - -/* - * error code returned by vdma_alloc() - * (See also arch/mips/kernel/jazzdma.c) - */ -#define VDMA_ERROR 0xffffffff - -/* - * VDMA pagetable entry description - */ -typedef volatile struct VDMA_PGTBL_ENTRY { - unsigned int frame; /* physical frame no. */ - unsigned int owner; /* owner of this entry (0=free) */ -} VDMA_PGTBL_ENTRY; - - -/* - * DMA channel control registers - * in the R4030 MCT_ADR chip - */ -#define JAZZ_R4030_CHNL_MODE 0xE0000100 /* 8 DMA Channel Mode Registers, */ - /* 0xE0000100,120,140... */ -#define JAZZ_R4030_CHNL_ENABLE 0xE0000108 /* 8 DMA Channel Enable Regs, */ - /* 0xE0000108,128,148... */ -#define JAZZ_R4030_CHNL_COUNT 0xE0000110 /* 8 DMA Channel Byte Cnt Regs, */ - /* 0xE0000110,130,150... */ -#define JAZZ_R4030_CHNL_ADDR 0xE0000118 /* 8 DMA Channel Address Regs, */ - /* 0xE0000118,138,158... */ - -/* channel enable register bits */ - -#define R4030_CHNL_ENABLE (1<<0) -#define R4030_CHNL_WRITE (1<<1) -#define R4030_TC_INTR (1<<8) -#define R4030_MEM_INTR (1<<9) -#define R4030_ADDR_INTR (1<<10) - -/* - * Channel mode register bits - */ -#define R4030_MODE_ATIME_40 (0) /* device access time on remote bus */ -#define R4030_MODE_ATIME_80 (1) -#define R4030_MODE_ATIME_120 (2) -#define R4030_MODE_ATIME_160 (3) -#define R4030_MODE_ATIME_200 (4) -#define R4030_MODE_ATIME_240 (5) -#define R4030_MODE_ATIME_280 (6) -#define R4030_MODE_ATIME_320 (7) -#define R4030_MODE_WIDTH_8 (1<<3) /* device data bus width */ -#define R4030_MODE_WIDTH_16 (2<<3) -#define R4030_MODE_WIDTH_32 (3<<3) -#define R4030_MODE_INTR_EN (1<<5) -#define R4030_MODE_BURST (1<<6) /* Rev. 2 only */ -#define R4030_MODE_FAST_ACK (1<<7) /* Rev. 2 only */ - -#endif /* _ASM_JAZZDMA_H */ diff --git a/include/asm-mips/kdebug.h b/include/asm-mips/kdebug.h deleted file mode 100644 index 5bf62aafc890..000000000000 --- a/include/asm-mips/kdebug.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_MIPS_KDEBUG_H -#define _ASM_MIPS_KDEBUG_H - -#include - -enum die_val { - DIE_OOPS = 1, - DIE_FP, - DIE_TRAP, - DIE_RI, -}; - -#endif /* _ASM_MIPS_KDEBUG_H */ diff --git a/include/asm-mips/kexec.h b/include/asm-mips/kexec.h deleted file mode 100644 index 4314892aaebb..000000000000 --- a/include/asm-mips/kexec.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * kexec.h for kexec - * Created by on Thu Oct 12 14:59:34 2006 - * - * This source code is licensed under the GNU General Public License, - * Version 2. See the file COPYING for more details. - */ - -#ifndef _MIPS_KEXEC -# define _MIPS_KEXEC - -/* Maximum physical address we can use pages from */ -#define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000) -/* Maximum address we can reach in physical address mode */ -#define KEXEC_DESTINATION_MEMORY_LIMIT (0x20000000) - /* Maximum address we can use for the control code buffer */ -#define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000) - -#define KEXEC_CONTROL_PAGE_SIZE 4096 - -/* The native architecture */ -#define KEXEC_ARCH KEXEC_ARCH_MIPS - -static inline void crash_setup_regs(struct pt_regs *newregs, - struct pt_regs *oldregs) -{ - /* Dummy implementation for now */ -} - -#endif /* !_MIPS_KEXEC */ diff --git a/include/asm-mips/kgdb.h b/include/asm-mips/kgdb.h deleted file mode 100644 index 48223b09396c..000000000000 --- a/include/asm-mips/kgdb.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef __ASM_KGDB_H_ -#define __ASM_KGDB_H_ - -#ifdef __KERNEL__ - -#include - -#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \ - (_MIPS_ISA == _MIPS_ISA_MIPS32) - -#define KGDB_GDB_REG_SIZE 32 - -#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \ - (_MIPS_ISA == _MIPS_ISA_MIPS64) - -#ifdef CONFIG_32BIT -#define KGDB_GDB_REG_SIZE 32 -#else /* CONFIG_CPU_32BIT */ -#define KGDB_GDB_REG_SIZE 64 -#endif -#else -#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA" -#endif /* _MIPS_ISA */ - -#define BUFMAX 2048 -#if (KGDB_GDB_REG_SIZE == 32) -#define NUMREGBYTES (90*sizeof(u32)) -#define NUMCRITREGBYTES (12*sizeof(u32)) -#else -#define NUMREGBYTES (90*sizeof(u64)) -#define NUMCRITREGBYTES (12*sizeof(u64)) -#endif -#define BREAK_INSTR_SIZE 4 -#define CACHE_FLUSH_IS_SAFE 0 - -extern void arch_kgdb_breakpoint(void); -extern int kgdb_early_setup; -extern void *saved_vectors[32]; -extern void handle_exception(struct pt_regs *regs); -extern void breakinst(void); - -#endif /* __KERNEL__ */ - -#endif /* __ASM_KGDB_H_ */ diff --git a/include/asm-mips/kmap_types.h b/include/asm-mips/kmap_types.h deleted file mode 100644 index 806aae3c5338..000000000000 --- a/include/asm-mips/kmap_types.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H - - -#ifdef CONFIG_DEBUG_HIGHMEM -# define D(n) __KM_FENCE_##n , -#else -# define D(n) -#endif - -enum km_type { -D(0) KM_BOUNCE_READ, -D(1) KM_SKB_SUNRPC_DATA, -D(2) KM_SKB_DATA_SOFTIRQ, -D(3) KM_USER0, -D(4) KM_USER1, -D(5) KM_BIO_SRC_IRQ, -D(6) KM_BIO_DST_IRQ, -D(7) KM_PTE0, -D(8) KM_PTE1, -D(9) KM_IRQ0, -D(10) KM_IRQ1, -D(11) KM_SOFTIRQ0, -D(12) KM_SOFTIRQ1, -D(13) KM_TYPE_NR -}; - -#undef D - -#endif diff --git a/include/asm-mips/kspd.h b/include/asm-mips/kspd.h deleted file mode 100644 index 4e9e724c8935..000000000000 --- a/include/asm-mips/kspd.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - */ - -#ifndef _ASM_KSPD_H -#define _ASM_KSPD_H - -struct kspd_notifications { - void (*kspd_sp_exit)(int sp_id); - - struct list_head list; -}; - -#ifdef CONFIG_MIPS_APSP_KSPD -extern void kspd_notify(struct kspd_notifications *notify); -#else -static inline void kspd_notify(struct kspd_notifications *notify) -{ -} -#endif - -#endif diff --git a/include/asm-mips/lasat/ds1603.h b/include/asm-mips/lasat/ds1603.h deleted file mode 100644 index edcd7544b358..000000000000 --- a/include/asm-mips/lasat/ds1603.h +++ /dev/null @@ -1,18 +0,0 @@ -#include - -/* Lasat 100 */ -#define DS1603_REG_100 (KSEG1ADDR(0x1c810000)) -#define DS1603_RST_100 (1 << 2) -#define DS1603_CLK_100 (1 << 0) -#define DS1603_DATA_SHIFT_100 1 -#define DS1603_DATA_100 (1 << DS1603_DATA_SHIFT_100) - -/* Lasat 200 */ -#define DS1603_REG_200 (KSEG1ADDR(0x11000000)) -#define DS1603_RST_200 (1 << 3) -#define DS1603_CLK_200 (1 << 4) -#define DS1603_DATA_200 (1 << 5) - -#define DS1603_DATA_REG_200 (DS1603_REG_200 + 0x10000) -#define DS1603_DATA_READ_SHIFT_200 9 -#define DS1603_DATA_READ_200 (1 << DS1603_DATA_READ_SHIFT_200) diff --git a/include/asm-mips/lasat/eeprom.h b/include/asm-mips/lasat/eeprom.h deleted file mode 100644 index 3dac203697fa..000000000000 --- a/include/asm-mips/lasat/eeprom.h +++ /dev/null @@ -1,17 +0,0 @@ -#include - -/* lasat 100 */ -#define AT93C_REG_100 KSEG1ADDR(0x1c810000) -#define AT93C_RDATA_REG_100 AT93C_REG_100 -#define AT93C_RDATA_SHIFT_100 4 -#define AT93C_WDATA_SHIFT_100 4 -#define AT93C_CS_M_100 (1 << 5) -#define AT93C_CLK_M_100 (1 << 3) - -/* lasat 200 */ -#define AT93C_REG_200 KSEG1ADDR(0x11000000) -#define AT93C_RDATA_REG_200 (AT93C_REG_200+0x10000) -#define AT93C_RDATA_SHIFT_200 8 -#define AT93C_WDATA_SHIFT_200 2 -#define AT93C_CS_M_200 (1 << 0) -#define AT93C_CLK_M_200 (1 << 1) diff --git a/include/asm-mips/lasat/head.h b/include/asm-mips/lasat/head.h deleted file mode 100644 index f5589f31a197..000000000000 --- a/include/asm-mips/lasat/head.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Image header stuff - */ -#ifndef _HEAD_H -#define _HEAD_H - -#define LASAT_K_MAGIC0_VAL 0xfedeabba -#define LASAT_K_MAGIC1_VAL 0x00bedead - -#ifndef _LANGUAGE_ASSEMBLY -#include -struct bootloader_header { - u32 magic[2]; - u32 version; - u32 image_start; - u32 image_size; - u32 kernel_start; - u32 kernel_entry; -}; -#endif - -#endif /* _HEAD_H */ diff --git a/include/asm-mips/lasat/lasat.h b/include/asm-mips/lasat/lasat.h deleted file mode 100644 index caeba1e302a2..000000000000 --- a/include/asm-mips/lasat/lasat.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * lasat.h - * - * Thomas Horsten - * Copyright (C) 2000 LASAT Networks A/S. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Configuration for LASAT boards, loads the appropriate include files. - */ -#ifndef _LASAT_H -#define _LASAT_H - -#ifndef _LANGUAGE_ASSEMBLY - -extern struct lasat_misc { - volatile u32 *reset_reg; - volatile u32 *flash_wp_reg; - u32 flash_wp_bit; -} *lasat_misc; - -enum lasat_mtdparts { - LASAT_MTD_BOOTLOADER, - LASAT_MTD_SERVICE, - LASAT_MTD_NORMAL, - LASAT_MTD_CONFIG, - LASAT_MTD_FS, - LASAT_MTD_LAST -}; - -/* - * The format of the data record in the EEPROM. - * See Documentation/LASAT/eeprom.txt for a detailed description - * of the fields in this struct, and the LASAT Hardware Configuration - * field specification for a detailed description of the config - * field. - */ -#include - -#define LASAT_EEPROM_VERSION 7 -struct lasat_eeprom_struct { - unsigned int version; - unsigned int cfg[3]; - unsigned char hwaddr[6]; - unsigned char print_partno[12]; - unsigned char term0; - unsigned char print_serial[14]; - unsigned char term1; - unsigned char prod_partno[12]; - unsigned char term2; - unsigned char prod_serial[14]; - unsigned char term3; - unsigned char passwd_hash[16]; - unsigned char pwdnull; - unsigned char vendid; - unsigned char ts_ref; - unsigned char ts_signoff; - unsigned char reserved[11]; - unsigned char debugaccess; - unsigned short prid; - unsigned int serviceflag; - unsigned int ipaddr; - unsigned int netmask; - unsigned int crc32; -}; - -struct lasat_eeprom_struct_pre7 { - unsigned int version; - unsigned int flags[3]; - unsigned char hwaddr0[6]; - unsigned char hwaddr1[6]; - unsigned char print_partno[9]; - unsigned char term0; - unsigned char print_serial[14]; - unsigned char term1; - unsigned char prod_partno[9]; - unsigned char term2; - unsigned char prod_serial[14]; - unsigned char term3; - unsigned char passwd_hash[24]; - unsigned char pwdnull; - unsigned char vendor; - unsigned char ts_ref; - unsigned char ts_signoff; - unsigned char reserved[6]; - unsigned int writecount; - unsigned int ipaddr; - unsigned int netmask; - unsigned int crc32; -}; - -/* Configuration descriptor encoding - see the doc for details */ - -#define LASAT_W0_DSCTYPE(v) (((v)) & 0xf) -#define LASAT_W0_BMID(v) (((v) >> 0x04) & 0xf) -#define LASAT_W0_CPUTYPE(v) (((v) >> 0x08) & 0xf) -#define LASAT_W0_BUSSPEED(v) (((v) >> 0x0c) & 0xf) -#define LASAT_W0_CPUCLK(v) (((v) >> 0x10) & 0xf) -#define LASAT_W0_SDRAMBANKSZ(v) (((v) >> 0x14) & 0xf) -#define LASAT_W0_SDRAMBANKS(v) (((v) >> 0x18) & 0xf) -#define LASAT_W0_L2CACHE(v) (((v) >> 0x1c) & 0xf) - -#define LASAT_W1_EDHAC(v) (((v)) & 0xf) -#define LASAT_W1_HIFN(v) (((v) >> 0x04) & 0x1) -#define LASAT_W1_ISDN(v) (((v) >> 0x05) & 0x1) -#define LASAT_W1_IDE(v) (((v) >> 0x06) & 0x1) -#define LASAT_W1_HDLC(v) (((v) >> 0x07) & 0x1) -#define LASAT_W1_USVERSION(v) (((v) >> 0x08) & 0x1) -#define LASAT_W1_4MACS(v) (((v) >> 0x09) & 0x1) -#define LASAT_W1_EXTSERIAL(v) (((v) >> 0x0a) & 0x1) -#define LASAT_W1_FLASHSIZE(v) (((v) >> 0x0c) & 0xf) -#define LASAT_W1_PCISLOTS(v) (((v) >> 0x10) & 0xf) -#define LASAT_W1_PCI1OPT(v) (((v) >> 0x14) & 0xf) -#define LASAT_W1_PCI2OPT(v) (((v) >> 0x18) & 0xf) -#define LASAT_W1_PCI3OPT(v) (((v) >> 0x1c) & 0xf) - -/* Routines specific to LASAT boards */ - -#define LASAT_BMID_MASQUERADE2 0 -#define LASAT_BMID_MASQUERADEPRO 1 -#define LASAT_BMID_SAFEPIPE25 2 -#define LASAT_BMID_SAFEPIPE50 3 -#define LASAT_BMID_SAFEPIPE100 4 -#define LASAT_BMID_SAFEPIPE5000 5 -#define LASAT_BMID_SAFEPIPE7000 6 -#define LASAT_BMID_SAFEPIPE1000 7 -#if 0 -#define LASAT_BMID_SAFEPIPE30 7 -#define LASAT_BMID_SAFEPIPE5100 8 -#define LASAT_BMID_SAFEPIPE7100 9 -#endif -#define LASAT_BMID_UNKNOWN 0xf -#define LASAT_MAX_BMID_NAMES 9 /* no larger than 15! */ - -#define LASAT_HAS_EDHAC (1 << 0) -#define LASAT_EDHAC_FAST (1 << 1) -#define LASAT_HAS_EADI (1 << 2) -#define LASAT_HAS_HIFN (1 << 3) -#define LASAT_HAS_ISDN (1 << 4) -#define LASAT_HAS_LEASEDLINE_IF (1 << 5) -#define LASAT_HAS_HDC (1 << 6) - -#define LASAT_PRID_MASQUERADE2 0 -#define LASAT_PRID_MASQUERADEPRO 1 -#define LASAT_PRID_SAFEPIPE25 2 -#define LASAT_PRID_SAFEPIPE50 3 -#define LASAT_PRID_SAFEPIPE100 4 -#define LASAT_PRID_SAFEPIPE5000 5 -#define LASAT_PRID_SAFEPIPE7000 6 -#define LASAT_PRID_SAFEPIPE30 7 -#define LASAT_PRID_SAFEPIPE5100 8 -#define LASAT_PRID_SAFEPIPE7100 9 - -#define LASAT_PRID_SAFEPIPE1110 10 -#define LASAT_PRID_SAFEPIPE3020 11 -#define LASAT_PRID_SAFEPIPE3030 12 -#define LASAT_PRID_SAFEPIPE5020 13 -#define LASAT_PRID_SAFEPIPE5030 14 -#define LASAT_PRID_SAFEPIPE1120 15 -#define LASAT_PRID_SAFEPIPE1130 16 -#define LASAT_PRID_SAFEPIPE6010 17 -#define LASAT_PRID_SAFEPIPE6110 18 -#define LASAT_PRID_SAFEPIPE6210 19 -#define LASAT_PRID_SAFEPIPE1020 20 -#define LASAT_PRID_SAFEPIPE1040 21 -#define LASAT_PRID_SAFEPIPE1060 22 - -struct lasat_info { - unsigned int li_cpu_hz; - unsigned int li_bus_hz; - unsigned int li_bmid; - unsigned int li_memsize; - unsigned int li_flash_size; - unsigned int li_prid; - unsigned char li_bmstr[16]; - unsigned char li_namestr[32]; - unsigned char li_typestr[16]; - /* Info on the Flash layout */ - unsigned int li_flash_base; - unsigned long li_flashpart_base[LASAT_MTD_LAST]; - unsigned long li_flashpart_size[LASAT_MTD_LAST]; - struct lasat_eeprom_struct li_eeprom_info; - unsigned int li_eeprom_upgrade_version; - unsigned int li_debugaccess; -}; - -extern struct lasat_info lasat_board_info; - -static inline unsigned long lasat_flash_partition_start(int partno) -{ - if (partno < 0 || partno >= LASAT_MTD_LAST) - return 0; - - return lasat_board_info.li_flashpart_base[partno]; -} - -static inline unsigned long lasat_flash_partition_size(int partno) -{ - if (partno < 0 || partno >= LASAT_MTD_LAST) - return 0; - - return lasat_board_info.li_flashpart_size[partno]; -} - -/* Called from setup() to initialize the global board_info struct */ -extern int lasat_init_board_info(void); - -/* Write the modified EEPROM info struct */ -extern void lasat_write_eeprom_info(void); - -#define N_MACHTYPES 2 -/* for calibration of delays */ - -/* the lasat_ndelay function is necessary because it is used at an - * early stage of the boot process where ndelay is not calibrated. - * It is used for the bit-banging rtc and eeprom drivers */ - -#include - -/* calculating with the slowest board with 100 MHz clock */ -#define LASAT_100_DIVIDER 20 -/* All 200's run at 250 MHz clock */ -#define LASAT_200_DIVIDER 8 - -extern unsigned int lasat_ndelay_divider; - -static inline void lasat_ndelay(unsigned int ns) -{ - __delay(ns / lasat_ndelay_divider); -} - -#define IS_LASAT_200() (current_cpu_data.cputype == CPU_R5000) - -#endif /* !defined (_LANGUAGE_ASSEMBLY) */ - -#define LASAT_SERVICEMODE_MAGIC_1 0xdeadbeef -#define LASAT_SERVICEMODE_MAGIC_2 0xfedeabba - -/* Lasat 100 boards */ -#define LASAT_GT_BASE (KSEG1ADDR(0x14000000)) - -/* Lasat 200 boards */ -#define Vrc5074_PHYS_BASE 0x1fa00000 -#define Vrc5074_BASE (KSEG1ADDR(Vrc5074_PHYS_BASE)) -#define PCI_WINDOW1 0x1a000000 - -#endif /* _LASAT_H */ diff --git a/include/asm-mips/lasat/lasatint.h b/include/asm-mips/lasat/lasatint.h deleted file mode 100644 index e0d2458b43d0..000000000000 --- a/include/asm-mips/lasat/lasatint.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __ASM_LASAT_LASATINT_H -#define __ASM_LASAT_LASATINT_H - -/* lasat 100 */ -#define LASAT_INT_STATUS_REG_100 (KSEG1ADDR(0x1c880000)) -#define LASAT_INT_MASK_REG_100 (KSEG1ADDR(0x1c890000)) -#define LASATINT_MASK_SHIFT_100 0 - -/* lasat 200 */ -#define LASAT_INT_STATUS_REG_200 (KSEG1ADDR(0x1104003c)) -#define LASAT_INT_MASK_REG_200 (KSEG1ADDR(0x1104003c)) -#define LASATINT_MASK_SHIFT_200 16 - -#endif /* __ASM_LASAT_LASATINT_H */ diff --git a/include/asm-mips/lasat/picvue.h b/include/asm-mips/lasat/picvue.h deleted file mode 100644 index 42a492edc40e..000000000000 --- a/include/asm-mips/lasat/picvue.h +++ /dev/null @@ -1,15 +0,0 @@ -/* Lasat 100 */ -#define PVC_REG_100 KSEG1ADDR(0x1c820000) -#define PVC_DATA_SHIFT_100 0 -#define PVC_DATA_M_100 0xFF -#define PVC_E_100 (1 << 8) -#define PVC_RW_100 (1 << 9) -#define PVC_RS_100 (1 << 10) - -/* Lasat 200 */ -#define PVC_REG_200 KSEG1ADDR(0x11000000) -#define PVC_DATA_SHIFT_200 24 -#define PVC_DATA_M_200 (0xFF << PVC_DATA_SHIFT_200) -#define PVC_E_200 (1 << 16) -#define PVC_RW_200 (1 << 17) -#define PVC_RS_200 (1 << 18) diff --git a/include/asm-mips/lasat/serial.h b/include/asm-mips/lasat/serial.h deleted file mode 100644 index 1c37d70579b8..000000000000 --- a/include/asm-mips/lasat/serial.h +++ /dev/null @@ -1,13 +0,0 @@ -#include - -/* Lasat 100 boards serial configuration */ -#define LASAT_BASE_BAUD_100 (7372800 / 16) -#define LASAT_UART_REGS_BASE_100 0x1c8b0000 -#define LASAT_UART_REGS_SHIFT_100 2 -#define LASATINT_UART_100 16 - -/* * LASAT 200 boards serial configuration */ -#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12) -#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300) -#define LASAT_UART_REGS_SHIFT_200 3 -#define LASATINT_UART_200 21 diff --git a/include/asm-mips/linkage.h b/include/asm-mips/linkage.h deleted file mode 100644 index e9a940d1b0c6..000000000000 --- a/include/asm-mips/linkage.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#ifdef __ASSEMBLY__ -#include -#endif - -#define __weak __attribute__((weak)) - -#endif diff --git a/include/asm-mips/local.h b/include/asm-mips/local.h deleted file mode 100644 index f96fd59e0845..000000000000 --- a/include/asm-mips/local.h +++ /dev/null @@ -1,221 +0,0 @@ -#ifndef _ARCH_MIPS_LOCAL_H -#define _ARCH_MIPS_LOCAL_H - -#include -#include -#include -#include -#include - -typedef struct -{ - atomic_long_t a; -} local_t; - -#define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) } - -#define local_read(l) atomic_long_read(&(l)->a) -#define local_set(l, i) atomic_long_set(&(l)->a, (i)) - -#define local_add(i, l) atomic_long_add((i), (&(l)->a)) -#define local_sub(i, l) atomic_long_sub((i), (&(l)->a)) -#define local_inc(l) atomic_long_inc(&(l)->a) -#define local_dec(l) atomic_long_dec(&(l)->a) - -/* - * Same as above, but return the result value - */ -static __inline__ long local_add_return(long i, local_t * l) -{ - unsigned long result; - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1:" __LL "%1, %2 # local_add_return \n" - " addu %0, %1, %3 \n" - __SC "%0, %2 \n" - " beqzl %0, 1b \n" - " addu %0, %1, %3 \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) - : "Ir" (i), "m" (l->a.counter) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1:" __LL "%1, %2 # local_add_return \n" - " addu %0, %1, %3 \n" - __SC "%0, %2 \n" - " beqz %0, 1b \n" - " addu %0, %1, %3 \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) - : "Ir" (i), "m" (l->a.counter) - : "memory"); - } else { - unsigned long flags; - - local_irq_save(flags); - result = l->a.counter; - result += i; - l->a.counter = result; - local_irq_restore(flags); - } - - return result; -} - -static __inline__ long local_sub_return(long i, local_t * l) -{ - unsigned long result; - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1:" __LL "%1, %2 # local_sub_return \n" - " subu %0, %1, %3 \n" - __SC "%0, %2 \n" - " beqzl %0, 1b \n" - " subu %0, %1, %3 \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) - : "Ir" (i), "m" (l->a.counter) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long temp; - - __asm__ __volatile__( - " .set mips3 \n" - "1:" __LL "%1, %2 # local_sub_return \n" - " subu %0, %1, %3 \n" - __SC "%0, %2 \n" - " beqz %0, 1b \n" - " subu %0, %1, %3 \n" - " .set mips0 \n" - : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) - : "Ir" (i), "m" (l->a.counter) - : "memory"); - } else { - unsigned long flags; - - local_irq_save(flags); - result = l->a.counter; - result -= i; - l->a.counter = result; - local_irq_restore(flags); - } - - return result; -} - -#define local_cmpxchg(l, o, n) \ - ((long)cmpxchg_local(&((l)->a.counter), (o), (n))) -#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n))) - -/** - * local_add_unless - add unless the number is a given value - * @l: pointer of type local_t - * @a: the amount to add to l... - * @u: ...unless l is equal to u. - * - * Atomically adds @a to @l, so long as it was not @u. - * Returns non-zero if @l was not @u, and zero otherwise. - */ -#define local_add_unless(l, a, u) \ -({ \ - long c, old; \ - c = local_read(l); \ - while (c != (u) && (old = local_cmpxchg((l), c, c + (a))) != c) \ - c = old; \ - c != (u); \ -}) -#define local_inc_not_zero(l) local_add_unless((l), 1, 0) - -#define local_dec_return(l) local_sub_return(1, (l)) -#define local_inc_return(l) local_add_return(1, (l)) - -/* - * local_sub_and_test - subtract value from variable and test result - * @i: integer value to subtract - * @l: pointer of type local_t - * - * Atomically subtracts @i from @l and returns - * true if the result is zero, or false for all - * other cases. - */ -#define local_sub_and_test(i, l) (local_sub_return((i), (l)) == 0) - -/* - * local_inc_and_test - increment and test - * @l: pointer of type local_t - * - * Atomically increments @l by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define local_inc_and_test(l) (local_inc_return(l) == 0) - -/* - * local_dec_and_test - decrement by 1 and test - * @l: pointer of type local_t - * - * Atomically decrements @l by 1 and - * returns true if the result is 0, or false for all other - * cases. - */ -#define local_dec_and_test(l) (local_sub_return(1, (l)) == 0) - -/* - * local_add_negative - add and test if negative - * @l: pointer of type local_t - * @i: integer value to add - * - * Atomically adds @i to @l and returns true - * if the result is negative, or false when - * result is greater than or equal to zero. - */ -#define local_add_negative(i, l) (local_add_return(i, (l)) < 0) - -/* Use these for per-cpu local_t variables: on some archs they are - * much more efficient than these naive implementations. Note they take - * a variable, not an address. - */ - -#define __local_inc(l) ((l)->a.counter++) -#define __local_dec(l) ((l)->a.counter++) -#define __local_add(i, l) ((l)->a.counter+=(i)) -#define __local_sub(i, l) ((l)->a.counter-=(i)) - -/* Need to disable preemption for the cpu local counters otherwise we could - still access a variable of a previous CPU in a non atomic way. */ -#define cpu_local_wrap_v(l) \ - ({ local_t res__; \ - preempt_disable(); \ - res__ = (l); \ - preempt_enable(); \ - res__; }) -#define cpu_local_wrap(l) \ - ({ preempt_disable(); \ - l; \ - preempt_enable(); }) \ - -#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l))) -#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i))) -#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l))) -#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l))) -#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l))) -#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l))) - -#define __cpu_local_inc(l) cpu_local_inc(l) -#define __cpu_local_dec(l) cpu_local_dec(l) -#define __cpu_local_add(i, l) cpu_local_add((i), (l)) -#define __cpu_local_sub(i, l) cpu_local_sub((i), (l)) - -#endif /* _ARCH_MIPS_LOCAL_H */ diff --git a/include/asm-mips/m48t35.h b/include/asm-mips/m48t35.h deleted file mode 100644 index f44852e9a96d..000000000000 --- a/include/asm-mips/m48t35.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Registers for the SGS-Thomson M48T35 Timekeeper RAM chip - */ -#ifndef _ASM_M48T35_H -#define _ASM_M48T35_H - -#include - -extern spinlock_t rtc_lock; - -struct m48t35_rtc { - volatile u8 pad[0x7ff8]; /* starts at 0x7ff8 */ - volatile u8 control; - volatile u8 sec; - volatile u8 min; - volatile u8 hour; - volatile u8 day; - volatile u8 date; - volatile u8 month; - volatile u8 year; -}; - -#define M48T35_RTC_SET 0x80 -#define M48T35_RTC_STOPPED 0x80 -#define M48T35_RTC_READ 0x40 - -#endif /* _ASM_M48T35_H */ diff --git a/include/asm-mips/m48t37.h b/include/asm-mips/m48t37.h deleted file mode 100644 index cabf86264f36..000000000000 --- a/include/asm-mips/m48t37.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Registers for the SGS-Thomson M48T37 Timekeeper RAM chip - */ -#ifndef _ASM_M48T37_H -#define _ASM_M48T37_H - -#include - -extern spinlock_t rtc_lock; - -struct m48t37_rtc { - volatile u8 pad[0x7ff0]; /* NVRAM */ - volatile u8 flags; - volatile u8 century; - volatile u8 alarm_sec; - volatile u8 alarm_min; - volatile u8 alarm_hour; - volatile u8 alarm_data; - volatile u8 interrupts; - volatile u8 watchdog; - volatile u8 control; - volatile u8 sec; - volatile u8 min; - volatile u8 hour; - volatile u8 day; - volatile u8 date; - volatile u8 month; - volatile u8 year; -}; - -#define M48T37_RTC_SET 0x80 -#define M48T37_RTC_STOPPED 0x80 -#define M48T37_RTC_READ 0x40 - -#endif /* _ASM_M48T37_H */ diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h deleted file mode 100644 index 0d302bad4492..000000000000 --- a/include/asm-mips/mach-au1x00/au1000.h +++ /dev/null @@ -1,1772 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Include file for Alchemy Semiconductor's Au1k CPU. - * - * Copyright 2000-2001, 2006-2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - - /* - * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp - */ - -#ifndef _AU1000_H_ -#define _AU1000_H_ - - -#ifndef _LANGUAGE_ASSEMBLY - -#include -#include - -#include -#include - -/* cpu pipeline flush */ -void static inline au_sync(void) -{ - __asm__ volatile ("sync"); -} - -void static inline au_sync_udelay(int us) -{ - __asm__ volatile ("sync"); - udelay(us); -} - -void static inline au_sync_delay(int ms) -{ - __asm__ volatile ("sync"); - mdelay(ms); -} - -void static inline au_writeb(u8 val, unsigned long reg) -{ - *(volatile u8 *)reg = val; -} - -void static inline au_writew(u16 val, unsigned long reg) -{ - *(volatile u16 *)reg = val; -} - -void static inline au_writel(u32 val, unsigned long reg) -{ - *(volatile u32 *)reg = val; -} - -static inline u8 au_readb(unsigned long reg) -{ - return *(volatile u8 *)reg; -} - -static inline u16 au_readw(unsigned long reg) -{ - return *(volatile u16 *)reg; -} - -static inline u32 au_readl(unsigned long reg) -{ - return *(volatile u32 *)reg; -} - - -/* arch/mips/au1000/common/clocks.c */ -extern void set_au1x00_speed(unsigned int new_freq); -extern unsigned int get_au1x00_speed(void); -extern void set_au1x00_uart_baud_base(unsigned long new_baud_base); -extern unsigned long get_au1x00_uart_baud_base(void); -extern void set_au1x00_lcd_clock(void); -extern unsigned int get_au1x00_lcd_clock(void); - -/* - * Every board describes its IRQ mapping with this table. - */ -struct au1xxx_irqmap { - int im_irq; - int im_type; - int im_request; -}; - -/* - * init_IRQ looks for a table with this name. - */ -extern struct au1xxx_irqmap au1xxx_irq_map[]; - -#endif /* !defined (_LANGUAGE_ASSEMBLY) */ - -/* - * SDRAM register offsets - */ -#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \ - defined(CONFIG_SOC_AU1100) -#define MEM_SDMODE0 0x0000 -#define MEM_SDMODE1 0x0004 -#define MEM_SDMODE2 0x0008 -#define MEM_SDADDR0 0x000C -#define MEM_SDADDR1 0x0010 -#define MEM_SDADDR2 0x0014 -#define MEM_SDREFCFG 0x0018 -#define MEM_SDPRECMD 0x001C -#define MEM_SDAUTOREF 0x0020 -#define MEM_SDWRMD0 0x0024 -#define MEM_SDWRMD1 0x0028 -#define MEM_SDWRMD2 0x002C -#define MEM_SDSLEEP 0x0030 -#define MEM_SDSMCKE 0x0034 - -/* - * MEM_SDMODE register content definitions - */ -#define MEM_SDMODE_F (1 << 22) -#define MEM_SDMODE_SR (1 << 21) -#define MEM_SDMODE_BS (1 << 20) -#define MEM_SDMODE_RS (3 << 18) -#define MEM_SDMODE_CS (7 << 15) -#define MEM_SDMODE_TRAS (15 << 11) -#define MEM_SDMODE_TMRD (3 << 9) -#define MEM_SDMODE_TWR (3 << 7) -#define MEM_SDMODE_TRP (3 << 5) -#define MEM_SDMODE_TRCD (3 << 3) -#define MEM_SDMODE_TCL (7 << 0) - -#define MEM_SDMODE_BS_2Bank (0 << 20) -#define MEM_SDMODE_BS_4Bank (1 << 20) -#define MEM_SDMODE_RS_11Row (0 << 18) -#define MEM_SDMODE_RS_12Row (1 << 18) -#define MEM_SDMODE_RS_13Row (2 << 18) -#define MEM_SDMODE_RS_N(N) ((N) << 18) -#define MEM_SDMODE_CS_7Col (0 << 15) -#define MEM_SDMODE_CS_8Col (1 << 15) -#define MEM_SDMODE_CS_9Col (2 << 15) -#define MEM_SDMODE_CS_10Col (3 << 15) -#define MEM_SDMODE_CS_11Col (4 << 15) -#define MEM_SDMODE_CS_N(N) ((N) << 15) -#define MEM_SDMODE_TRAS_N(N) ((N) << 11) -#define MEM_SDMODE_TMRD_N(N) ((N) << 9) -#define MEM_SDMODE_TWR_N(N) ((N) << 7) -#define MEM_SDMODE_TRP_N(N) ((N) << 5) -#define MEM_SDMODE_TRCD_N(N) ((N) << 3) -#define MEM_SDMODE_TCL_N(N) ((N) << 0) - -/* - * MEM_SDADDR register contents definitions - */ -#define MEM_SDADDR_E (1 << 20) -#define MEM_SDADDR_CSBA (0x03FF << 10) -#define MEM_SDADDR_CSMASK (0x03FF << 0) -#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12) -#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22) - -/* - * MEM_SDREFCFG register content definitions - */ -#define MEM_SDREFCFG_TRC (15 << 28) -#define MEM_SDREFCFG_TRPM (3 << 26) -#define MEM_SDREFCFG_E (1 << 25) -#define MEM_SDREFCFG_RE (0x1ffffff << 0) -#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC) -#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM) -#define MEM_SDREFCFG_REF_N(N) (N) -#endif - -/***********************************************************************/ - -/* - * Au1550 SDRAM Register Offsets - */ - -/***********************************************************************/ - -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) -#define MEM_SDMODE0 0x0800 -#define MEM_SDMODE1 0x0808 -#define MEM_SDMODE2 0x0810 -#define MEM_SDADDR0 0x0820 -#define MEM_SDADDR1 0x0828 -#define MEM_SDADDR2 0x0830 -#define MEM_SDCONFIGA 0x0840 -#define MEM_SDCONFIGB 0x0848 -#define MEM_SDSTAT 0x0850 -#define MEM_SDERRADDR 0x0858 -#define MEM_SDSTRIDE0 0x0860 -#define MEM_SDSTRIDE1 0x0868 -#define MEM_SDSTRIDE2 0x0870 -#define MEM_SDWRMD0 0x0880 -#define MEM_SDWRMD1 0x0888 -#define MEM_SDWRMD2 0x0890 -#define MEM_SDPRECMD 0x08C0 -#define MEM_SDAUTOREF 0x08C8 -#define MEM_SDSREF 0x08D0 -#define MEM_SDSLEEP MEM_SDSREF - -#endif - -/* - * Physical base addresses for integrated peripherals - */ - -#ifdef CONFIG_SOC_AU1000 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 -#define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 -#define IRDA_PHYS_ADDR 0x10300000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MAC1_PHYS_ADDR 0x10510000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART2_PHYS_ADDR 0x11300000 -#define UART3_PHYS_ADDR 0x11400000 -#define SSI0_PHYS_ADDR 0x11600000 -#define SSI1_PHYS_ADDR 0x11680000 -#define SYS_PHYS_ADDR 0x11900000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/********************************************************************/ - -#ifdef CONFIG_SOC_AU1500 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 -#define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 -#define PCI_PHYS_ADDR 0x14005000 -#define MAC0_PHYS_ADDR 0x11500000 -#define MAC1_PHYS_ADDR 0x11510000 -#define MACEN_PHYS_ADDR 0x11520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART3_PHYS_ADDR 0x11400000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define PCI_MEM_PHYS_ADDR 0x400000000ULL -#define PCI_IO_PHYS_ADDR 0x500000000ULL -#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL -#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/********************************************************************/ - -#ifdef CONFIG_SOC_AU1100 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define SD0_PHYS_ADDR 0x10600000 -#define SD1_PHYS_ADDR 0x10680000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 -#define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 -#define IRDA_PHYS_ADDR 0x10300000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART3_PHYS_ADDR 0x11400000 -#define SSI0_PHYS_ADDR 0x11600000 -#define SSI1_PHYS_ADDR 0x11680000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define LCD_PHYS_ADDR 0x15000000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/***********************************************************************/ - -#ifdef CONFIG_SOC_AU1550 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define USBH_PHYS_ADDR 0x14020000 -#define USBD_PHYS_ADDR 0x10200000 -#define PCI_PHYS_ADDR 0x14005000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MAC1_PHYS_ADDR 0x10510000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART3_PHYS_ADDR 0x11400000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define DDMA_PHYS_ADDR 0x14002000 -#define PE_PHYS_ADDR 0x14008000 -#define PSC0_PHYS_ADDR 0x11A00000 -#define PSC1_PHYS_ADDR 0x11B00000 -#define PSC2_PHYS_ADDR 0x10A00000 -#define PSC3_PHYS_ADDR 0x10B00000 -#define PCI_MEM_PHYS_ADDR 0x400000000ULL -#define PCI_IO_PHYS_ADDR 0x500000000ULL -#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL -#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/***********************************************************************/ - -#ifdef CONFIG_SOC_AU1200 -#define MEM_PHYS_ADDR 0x14000000 -#define STATIC_MEM_PHYS_ADDR 0x14001000 -#define AES_PHYS_ADDR 0x10300000 -#define CIM_PHYS_ADDR 0x14004000 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define USBM_PHYS_ADDR 0x14020000 -#define USBH_PHYS_ADDR 0x14020100 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define DDMA_PHYS_ADDR 0x14002000 -#define PSC0_PHYS_ADDR 0x11A00000 -#define PSC1_PHYS_ADDR 0x11B00000 -#define SD0_PHYS_ADDR 0x10600000 -#define SD1_PHYS_ADDR 0x10680000 -#define LCD_PHYS_ADDR 0x15000000 -#define SWCNT_PHYS_ADDR 0x1110010C -#define MAEFE_PHYS_ADDR 0x14012000 -#define MAEBE_PHYS_ADDR 0x14010000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL -#endif - -/* Static Bus Controller */ -#define MEM_STCFG0 0xB4001000 -#define MEM_STTIME0 0xB4001004 -#define MEM_STADDR0 0xB4001008 - -#define MEM_STCFG1 0xB4001010 -#define MEM_STTIME1 0xB4001014 -#define MEM_STADDR1 0xB4001018 - -#define MEM_STCFG2 0xB4001020 -#define MEM_STTIME2 0xB4001024 -#define MEM_STADDR2 0xB4001028 - -#define MEM_STCFG3 0xB4001030 -#define MEM_STTIME3 0xB4001034 -#define MEM_STADDR3 0xB4001038 - -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) -#define MEM_STNDCTL 0xB4001100 -#define MEM_STSTAT 0xB4001104 - -#define MEM_STNAND_CMD 0x0 -#define MEM_STNAND_ADDR 0x4 -#define MEM_STNAND_DATA 0x20 -#endif - -/* Interrupt Controller 0 */ -#define IC0_CFG0RD 0xB0400040 -#define IC0_CFG0SET 0xB0400040 -#define IC0_CFG0CLR 0xB0400044 - -#define IC0_CFG1RD 0xB0400048 -#define IC0_CFG1SET 0xB0400048 -#define IC0_CFG1CLR 0xB040004C - -#define IC0_CFG2RD 0xB0400050 -#define IC0_CFG2SET 0xB0400050 -#define IC0_CFG2CLR 0xB0400054 - -#define IC0_REQ0INT 0xB0400054 -#define IC0_SRCRD 0xB0400058 -#define IC0_SRCSET 0xB0400058 -#define IC0_SRCCLR 0xB040005C -#define IC0_REQ1INT 0xB040005C - -#define IC0_ASSIGNRD 0xB0400060 -#define IC0_ASSIGNSET 0xB0400060 -#define IC0_ASSIGNCLR 0xB0400064 - -#define IC0_WAKERD 0xB0400068 -#define IC0_WAKESET 0xB0400068 -#define IC0_WAKECLR 0xB040006C - -#define IC0_MASKRD 0xB0400070 -#define IC0_MASKSET 0xB0400070 -#define IC0_MASKCLR 0xB0400074 - -#define IC0_RISINGRD 0xB0400078 -#define IC0_RISINGCLR 0xB0400078 -#define IC0_FALLINGRD 0xB040007C -#define IC0_FALLINGCLR 0xB040007C - -#define IC0_TESTBIT 0xB0400080 - -/* Interrupt Controller 1 */ -#define IC1_CFG0RD 0xB1800040 -#define IC1_CFG0SET 0xB1800040 -#define IC1_CFG0CLR 0xB1800044 - -#define IC1_CFG1RD 0xB1800048 -#define IC1_CFG1SET 0xB1800048 -#define IC1_CFG1CLR 0xB180004C - -#define IC1_CFG2RD 0xB1800050 -#define IC1_CFG2SET 0xB1800050 -#define IC1_CFG2CLR 0xB1800054 - -#define IC1_REQ0INT 0xB1800054 -#define IC1_SRCRD 0xB1800058 -#define IC1_SRCSET 0xB1800058 -#define IC1_SRCCLR 0xB180005C -#define IC1_REQ1INT 0xB180005C - -#define IC1_ASSIGNRD 0xB1800060 -#define IC1_ASSIGNSET 0xB1800060 -#define IC1_ASSIGNCLR 0xB1800064 - -#define IC1_WAKERD 0xB1800068 -#define IC1_WAKESET 0xB1800068 -#define IC1_WAKECLR 0xB180006C - -#define IC1_MASKRD 0xB1800070 -#define IC1_MASKSET 0xB1800070 -#define IC1_MASKCLR 0xB1800074 - -#define IC1_RISINGRD 0xB1800078 -#define IC1_RISINGCLR 0xB1800078 -#define IC1_FALLINGRD 0xB180007C -#define IC1_FALLINGCLR 0xB180007C - -#define IC1_TESTBIT 0xB1800080 - -/* Interrupt Configuration Modes */ -#define INTC_INT_DISABLED 0x0 -#define INTC_INT_RISE_EDGE 0x1 -#define INTC_INT_FALL_EDGE 0x2 -#define INTC_INT_RISE_AND_FALL_EDGE 0x3 -#define INTC_INT_HIGH_LEVEL 0x5 -#define INTC_INT_LOW_LEVEL 0x6 -#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 - -/* Interrupt Numbers */ -/* Au1000 */ -#ifdef CONFIG_SOC_AU1000 -enum soc_au1000_ints { - AU1000_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1000_UART0_INT = AU1000_FIRST_INT, - AU1000_UART1_INT, /* au1000 */ - AU1000_UART2_INT, /* au1000 */ - AU1000_UART3_INT, - AU1000_SSI0_INT, /* au1000 */ - AU1000_SSI1_INT, /* au1000 */ - AU1000_DMA_INT_BASE, - - AU1000_TOY_INT = AU1000_FIRST_INT + 14, - AU1000_TOY_MATCH0_INT, - AU1000_TOY_MATCH1_INT, - AU1000_TOY_MATCH2_INT, - AU1000_RTC_INT, - AU1000_RTC_MATCH0_INT, - AU1000_RTC_MATCH1_INT, - AU1000_RTC_MATCH2_INT, - AU1000_IRDA_TX_INT, /* au1000 */ - AU1000_IRDA_RX_INT, /* au1000 */ - AU1000_USB_DEV_REQ_INT, - AU1000_USB_DEV_SUS_INT, - AU1000_USB_HOST_INT, - AU1000_ACSYNC_INT, - AU1000_MAC0_DMA_INT, - AU1000_MAC1_DMA_INT, - AU1000_I2S_UO_INT, /* au1000 */ - AU1000_AC97C_INT, - AU1000_GPIO_0, - AU1000_GPIO_1, - AU1000_GPIO_2, - AU1000_GPIO_3, - AU1000_GPIO_4, - AU1000_GPIO_5, - AU1000_GPIO_6, - AU1000_GPIO_7, - AU1000_GPIO_8, - AU1000_GPIO_9, - AU1000_GPIO_10, - AU1000_GPIO_11, - AU1000_GPIO_12, - AU1000_GPIO_13, - AU1000_GPIO_14, - AU1000_GPIO_15, - AU1000_GPIO_16, - AU1000_GPIO_17, - AU1000_GPIO_18, - AU1000_GPIO_19, - AU1000_GPIO_20, - AU1000_GPIO_21, - AU1000_GPIO_22, - AU1000_GPIO_23, - AU1000_GPIO_24, - AU1000_GPIO_25, - AU1000_GPIO_26, - AU1000_GPIO_27, - AU1000_GPIO_28, - AU1000_GPIO_29, - AU1000_GPIO_30, - AU1000_GPIO_31, -}; - -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 -#define UART2_ADDR 0xB1300000 -#define UART3_ADDR 0xB1400000 - -#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ -#define USB_HOST_CONFIG 0xB017FFFC - -#define AU1000_ETH0_BASE 0xB0500000 -#define AU1000_ETH1_BASE 0xB0510000 -#define AU1000_MAC0_ENABLE 0xB0520000 -#define AU1000_MAC1_ENABLE 0xB0520004 -#define NUM_ETH_INTERFACES 2 -#endif /* CONFIG_SOC_AU1000 */ - -/* Au1500 */ -#ifdef CONFIG_SOC_AU1500 -enum soc_au1500_ints { - AU1500_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1500_UART0_INT = AU1500_FIRST_INT, - AU1000_PCI_INTA, /* au1500 */ - AU1000_PCI_INTB, /* au1500 */ - AU1500_UART3_INT, - AU1000_PCI_INTC, /* au1500 */ - AU1000_PCI_INTD, /* au1500 */ - AU1000_DMA_INT_BASE, - - AU1000_TOY_INT = AU1500_FIRST_INT + 14, - AU1000_TOY_MATCH0_INT, - AU1000_TOY_MATCH1_INT, - AU1000_TOY_MATCH2_INT, - AU1000_RTC_INT, - AU1000_RTC_MATCH0_INT, - AU1000_RTC_MATCH1_INT, - AU1000_RTC_MATCH2_INT, - AU1500_PCI_ERR_INT, - AU1500_RESERVED_INT, - AU1000_USB_DEV_REQ_INT, - AU1000_USB_DEV_SUS_INT, - AU1000_USB_HOST_INT, - AU1000_ACSYNC_INT, - AU1500_MAC0_DMA_INT, - AU1500_MAC1_DMA_INT, - AU1000_AC97C_INT = AU1500_FIRST_INT + 31, - AU1000_GPIO_0, - AU1000_GPIO_1, - AU1000_GPIO_2, - AU1000_GPIO_3, - AU1000_GPIO_4, - AU1000_GPIO_5, - AU1000_GPIO_6, - AU1000_GPIO_7, - AU1000_GPIO_8, - AU1000_GPIO_9, - AU1000_GPIO_10, - AU1000_GPIO_11, - AU1000_GPIO_12, - AU1000_GPIO_13, - AU1000_GPIO_14, - AU1000_GPIO_15, - AU1500_GPIO_200, - AU1500_GPIO_201, - AU1500_GPIO_202, - AU1500_GPIO_203, - AU1500_GPIO_20, - AU1500_GPIO_204, - AU1500_GPIO_205, - AU1500_GPIO_23, - AU1500_GPIO_24, - AU1500_GPIO_25, - AU1500_GPIO_26, - AU1500_GPIO_27, - AU1500_GPIO_28, - AU1500_GPIO_206, - AU1500_GPIO_207, - AU1500_GPIO_208_215, -}; - -/* shortcuts */ -#define INTA AU1000_PCI_INTA -#define INTB AU1000_PCI_INTB -#define INTC AU1000_PCI_INTC -#define INTD AU1000_PCI_INTD - -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - -#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ -#define USB_HOST_CONFIG 0xB017fffc - -#define AU1500_ETH0_BASE 0xB1500000 -#define AU1500_ETH1_BASE 0xB1510000 -#define AU1500_MAC0_ENABLE 0xB1520000 -#define AU1500_MAC1_ENABLE 0xB1520004 -#define NUM_ETH_INTERFACES 2 -#endif /* CONFIG_SOC_AU1500 */ - -/* Au1100 */ -#ifdef CONFIG_SOC_AU1100 -enum soc_au1100_ints { - AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1100_UART0_INT, - AU1100_UART1_INT, - AU1100_SD_INT, - AU1100_UART3_INT, - AU1000_SSI0_INT, - AU1000_SSI1_INT, - AU1000_DMA_INT_BASE, - - AU1000_TOY_INT = AU1100_FIRST_INT + 14, - AU1000_TOY_MATCH0_INT, - AU1000_TOY_MATCH1_INT, - AU1000_TOY_MATCH2_INT, - AU1000_RTC_INT, - AU1000_RTC_MATCH0_INT, - AU1000_RTC_MATCH1_INT, - AU1000_RTC_MATCH2_INT, - AU1000_IRDA_TX_INT, - AU1000_IRDA_RX_INT, - AU1000_USB_DEV_REQ_INT, - AU1000_USB_DEV_SUS_INT, - AU1000_USB_HOST_INT, - AU1000_ACSYNC_INT, - AU1100_MAC0_DMA_INT, - AU1100_GPIO_208_215, - AU1100_LCD_INT, - AU1000_AC97C_INT, - AU1000_GPIO_0, - AU1000_GPIO_1, - AU1000_GPIO_2, - AU1000_GPIO_3, - AU1000_GPIO_4, - AU1000_GPIO_5, - AU1000_GPIO_6, - AU1000_GPIO_7, - AU1000_GPIO_8, - AU1000_GPIO_9, - AU1000_GPIO_10, - AU1000_GPIO_11, - AU1000_GPIO_12, - AU1000_GPIO_13, - AU1000_GPIO_14, - AU1000_GPIO_15, - AU1000_GPIO_16, - AU1000_GPIO_17, - AU1000_GPIO_18, - AU1000_GPIO_19, - AU1000_GPIO_20, - AU1000_GPIO_21, - AU1000_GPIO_22, - AU1000_GPIO_23, - AU1000_GPIO_24, - AU1000_GPIO_25, - AU1000_GPIO_26, - AU1000_GPIO_27, - AU1000_GPIO_28, - AU1000_GPIO_29, - AU1000_GPIO_30, - AU1000_GPIO_31, -}; - -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 -#define UART3_ADDR 0xB1400000 - -#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ -#define USB_HOST_CONFIG 0xB017FFFC - -#define AU1100_ETH0_BASE 0xB0500000 -#define AU1100_MAC0_ENABLE 0xB0520000 -#define NUM_ETH_INTERFACES 1 -#endif /* CONFIG_SOC_AU1100 */ - -#ifdef CONFIG_SOC_AU1550 -enum soc_au1550_ints { - AU1550_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1550_UART0_INT = AU1550_FIRST_INT, - AU1550_PCI_INTA, - AU1550_PCI_INTB, - AU1550_DDMA_INT, - AU1550_CRYPTO_INT, - AU1550_PCI_INTC, - AU1550_PCI_INTD, - AU1550_PCI_RST_INT, - AU1550_UART1_INT, - AU1550_UART3_INT, - AU1550_PSC0_INT, - AU1550_PSC1_INT, - AU1550_PSC2_INT, - AU1550_PSC3_INT, - AU1000_TOY_INT, - AU1000_TOY_MATCH0_INT, - AU1000_TOY_MATCH1_INT, - AU1000_TOY_MATCH2_INT, - AU1000_RTC_INT, - AU1000_RTC_MATCH0_INT, - AU1000_RTC_MATCH1_INT, - AU1000_RTC_MATCH2_INT, - - AU1550_NAND_INT = AU1550_FIRST_INT + 23, - AU1550_USB_DEV_REQ_INT, - AU1000_USB_DEV_REQ_INT = AU1550_USB_DEV_REQ_INT, - AU1550_USB_DEV_SUS_INT, - AU1000_USB_DEV_SUS_INT = AU1550_USB_DEV_SUS_INT, - AU1550_USB_HOST_INT, - AU1000_USB_HOST_INT = AU1550_USB_HOST_INT, - AU1550_MAC0_DMA_INT, - AU1550_MAC1_DMA_INT, - AU1000_GPIO_0 = AU1550_FIRST_INT + 32, - AU1000_GPIO_1, - AU1000_GPIO_2, - AU1000_GPIO_3, - AU1000_GPIO_4, - AU1000_GPIO_5, - AU1000_GPIO_6, - AU1000_GPIO_7, - AU1000_GPIO_8, - AU1000_GPIO_9, - AU1000_GPIO_10, - AU1000_GPIO_11, - AU1000_GPIO_12, - AU1000_GPIO_13, - AU1000_GPIO_14, - AU1000_GPIO_15, - AU1550_GPIO_200, - AU1500_GPIO_201_205, /* Logical or of GPIO201:205 */ - AU1500_GPIO_16, - AU1500_GPIO_17, - AU1500_GPIO_20, - AU1500_GPIO_21, - AU1500_GPIO_22, - AU1500_GPIO_23, - AU1500_GPIO_24, - AU1500_GPIO_25, - AU1500_GPIO_26, - AU1500_GPIO_27, - AU1500_GPIO_28, - AU1500_GPIO_206, - AU1500_GPIO_207, - AU1500_GPIO_208_218, /* Logical or of GPIO208:218 */ -}; - -/* shortcuts */ -#define INTA AU1550_PCI_INTA -#define INTB AU1550_PCI_INTB -#define INTC AU1550_PCI_INTC -#define INTD AU1550_PCI_INTD - -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 -#define UART3_ADDR 0xB1400000 - -#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */ -#define USB_OHCI_LEN 0x00060000 -#define USB_HOST_CONFIG 0xB4027ffc - -#define AU1550_ETH0_BASE 0xB0500000 -#define AU1550_ETH1_BASE 0xB0510000 -#define AU1550_MAC0_ENABLE 0xB0520000 -#define AU1550_MAC1_ENABLE 0xB0520004 -#define NUM_ETH_INTERFACES 2 -#endif /* CONFIG_SOC_AU1550 */ - -#ifdef CONFIG_SOC_AU1200 -enum soc_au1200_ints { - AU1200_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1200_UART0_INT = AU1200_FIRST_INT, - AU1200_SWT_INT, - AU1200_SD_INT, - AU1200_DDMA_INT, - AU1200_MAE_BE_INT, - AU1200_GPIO_200, - AU1200_GPIO_201, - AU1200_GPIO_202, - AU1200_UART1_INT, - AU1200_MAE_FE_INT, - AU1200_PSC0_INT, - AU1200_PSC1_INT, - AU1200_AES_INT, - AU1200_CAMERA_INT, - AU1000_TOY_INT, - AU1000_TOY_MATCH0_INT, - AU1000_TOY_MATCH1_INT, - AU1000_TOY_MATCH2_INT, - AU1000_RTC_INT, - AU1000_RTC_MATCH0_INT, - AU1000_RTC_MATCH1_INT, - AU1000_RTC_MATCH2_INT, - - AU1200_NAND_INT = AU1200_FIRST_INT + 23, - AU1200_GPIO_204, - AU1200_GPIO_205, - AU1200_GPIO_206, - AU1200_GPIO_207, - AU1200_GPIO_208_215, /* Logical OR of 208:215 */ - AU1200_USB_INT, - AU1000_USB_HOST_INT = AU1200_USB_INT, - AU1200_LCD_INT, - AU1200_MAE_BOTH_INT, - AU1000_GPIO_0, - AU1000_GPIO_1, - AU1000_GPIO_2, - AU1000_GPIO_3, - AU1000_GPIO_4, - AU1000_GPIO_5, - AU1000_GPIO_6, - AU1000_GPIO_7, - AU1000_GPIO_8, - AU1000_GPIO_9, - AU1000_GPIO_10, - AU1000_GPIO_11, - AU1000_GPIO_12, - AU1000_GPIO_13, - AU1000_GPIO_14, - AU1000_GPIO_15, - AU1000_GPIO_16, - AU1000_GPIO_17, - AU1000_GPIO_18, - AU1000_GPIO_19, - AU1000_GPIO_20, - AU1000_GPIO_21, - AU1000_GPIO_22, - AU1000_GPIO_23, - AU1000_GPIO_24, - AU1000_GPIO_25, - AU1000_GPIO_26, - AU1000_GPIO_27, - AU1000_GPIO_28, - AU1000_GPIO_29, - AU1000_GPIO_30, - AU1000_GPIO_31, -}; - -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 - -#define USB_UOC_BASE 0x14020020 -#define USB_UOC_LEN 0x20 -#define USB_OHCI_BASE 0x14020100 -#define USB_OHCI_LEN 0x100 -#define USB_EHCI_BASE 0x14020200 -#define USB_EHCI_LEN 0x100 -#define USB_UDC_BASE 0x14022000 -#define USB_UDC_LEN 0x2000 -#define USB_MSR_BASE 0xB4020000 -#define USB_MSR_MCFG 4 -#define USBMSRMCFG_OMEMEN 0 -#define USBMSRMCFG_OBMEN 1 -#define USBMSRMCFG_EMEMEN 2 -#define USBMSRMCFG_EBMEN 3 -#define USBMSRMCFG_DMEMEN 4 -#define USBMSRMCFG_DBMEN 5 -#define USBMSRMCFG_GMEMEN 6 -#define USBMSRMCFG_OHCCLKEN 16 -#define USBMSRMCFG_EHCCLKEN 17 -#define USBMSRMCFG_UDCCLKEN 18 -#define USBMSRMCFG_PHYPLLEN 19 -#define USBMSRMCFG_RDCOMB 30 -#define USBMSRMCFG_PFEN 31 - -#endif /* CONFIG_SOC_AU1200 */ - -#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8) -#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31) -#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_BASE + 32) -#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31) - -#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST -#define INTX 0xFF /* not valid */ - -/* Programmable Counters 0 and 1 */ -#define SYS_BASE 0xB1900000 -#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) -# define SYS_CNTRL_E1S (1 << 23) -# define SYS_CNTRL_T1S (1 << 20) -# define SYS_CNTRL_M21 (1 << 19) -# define SYS_CNTRL_M11 (1 << 18) -# define SYS_CNTRL_M01 (1 << 17) -# define SYS_CNTRL_C1S (1 << 16) -# define SYS_CNTRL_BP (1 << 14) -# define SYS_CNTRL_EN1 (1 << 13) -# define SYS_CNTRL_BT1 (1 << 12) -# define SYS_CNTRL_EN0 (1 << 11) -# define SYS_CNTRL_BT0 (1 << 10) -# define SYS_CNTRL_E0 (1 << 8) -# define SYS_CNTRL_E0S (1 << 7) -# define SYS_CNTRL_32S (1 << 5) -# define SYS_CNTRL_T0S (1 << 4) -# define SYS_CNTRL_M20 (1 << 3) -# define SYS_CNTRL_M10 (1 << 2) -# define SYS_CNTRL_M00 (1 << 1) -# define SYS_CNTRL_C0S (1 << 0) - -/* Programmable Counter 0 Registers */ -#define SYS_TOYTRIM (SYS_BASE + 0) -#define SYS_TOYWRITE (SYS_BASE + 4) -#define SYS_TOYMATCH0 (SYS_BASE + 8) -#define SYS_TOYMATCH1 (SYS_BASE + 0xC) -#define SYS_TOYMATCH2 (SYS_BASE + 0x10) -#define SYS_TOYREAD (SYS_BASE + 0x40) - -/* Programmable Counter 1 Registers */ -#define SYS_RTCTRIM (SYS_BASE + 0x44) -#define SYS_RTCWRITE (SYS_BASE + 0x48) -#define SYS_RTCMATCH0 (SYS_BASE + 0x4C) -#define SYS_RTCMATCH1 (SYS_BASE + 0x50) -#define SYS_RTCMATCH2 (SYS_BASE + 0x54) -#define SYS_RTCREAD (SYS_BASE + 0x58) - -/* I2S Controller */ -#define I2S_DATA 0xB1000000 -# define I2S_DATA_MASK 0xffffff -#define I2S_CONFIG 0xB1000004 -# define I2S_CONFIG_XU (1 << 25) -# define I2S_CONFIG_XO (1 << 24) -# define I2S_CONFIG_RU (1 << 23) -# define I2S_CONFIG_RO (1 << 22) -# define I2S_CONFIG_TR (1 << 21) -# define I2S_CONFIG_TE (1 << 20) -# define I2S_CONFIG_TF (1 << 19) -# define I2S_CONFIG_RR (1 << 18) -# define I2S_CONFIG_RE (1 << 17) -# define I2S_CONFIG_RF (1 << 16) -# define I2S_CONFIG_PD (1 << 11) -# define I2S_CONFIG_LB (1 << 10) -# define I2S_CONFIG_IC (1 << 9) -# define I2S_CONFIG_FM_BIT 7 -# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_TN (1 << 6) -# define I2S_CONFIG_RN (1 << 5) -# define I2S_CONFIG_SZ_BIT 0 -# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) - -#define I2S_CONTROL 0xB1000008 -# define I2S_CONTROL_D (1 << 1) -# define I2S_CONTROL_CE (1 << 0) - -/* USB Host Controller */ -#ifndef USB_OHCI_LEN -#define USB_OHCI_LEN 0x00100000 -#endif - -#ifndef CONFIG_SOC_AU1200 - -/* USB Device Controller */ -#define USBD_EP0RD 0xB0200000 -#define USBD_EP0WR 0xB0200004 -#define USBD_EP2WR 0xB0200008 -#define USBD_EP3WR 0xB020000C -#define USBD_EP4RD 0xB0200010 -#define USBD_EP5RD 0xB0200014 -#define USBD_INTEN 0xB0200018 -#define USBD_INTSTAT 0xB020001C -# define USBDEV_INT_SOF (1 << 12) -# define USBDEV_INT_HF_BIT 6 -# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) -# define USBDEV_INT_CMPLT_BIT 0 -# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) -#define USBD_CONFIG 0xB0200020 -#define USBD_EP0CS 0xB0200024 -#define USBD_EP2CS 0xB0200028 -#define USBD_EP3CS 0xB020002C -#define USBD_EP4CS 0xB0200030 -#define USBD_EP5CS 0xB0200034 -# define USBDEV_CS_SU (1 << 14) -# define USBDEV_CS_NAK (1 << 13) -# define USBDEV_CS_ACK (1 << 12) -# define USBDEV_CS_BUSY (1 << 11) -# define USBDEV_CS_TSIZE_BIT 1 -# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) -# define USBDEV_CS_STALL (1 << 0) -#define USBD_EP0RDSTAT 0xB0200040 -#define USBD_EP0WRSTAT 0xB0200044 -#define USBD_EP2WRSTAT 0xB0200048 -#define USBD_EP3WRSTAT 0xB020004C -#define USBD_EP4RDSTAT 0xB0200050 -#define USBD_EP5RDSTAT 0xB0200054 -# define USBDEV_FSTAT_FLUSH (1 << 6) -# define USBDEV_FSTAT_UF (1 << 5) -# define USBDEV_FSTAT_OF (1 << 4) -# define USBDEV_FSTAT_FCNT_BIT 0 -# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) -#define USBD_ENABLE 0xB0200058 -# define USBDEV_ENABLE (1 << 1) -# define USBDEV_CE (1 << 0) - -#endif /* !CONFIG_SOC_AU1200 */ - -/* Ethernet Controllers */ - -/* 4 byte offsets from AU1000_ETH_BASE */ -#define MAC_CONTROL 0x0 -# define MAC_RX_ENABLE (1 << 2) -# define MAC_TX_ENABLE (1 << 3) -# define MAC_DEF_CHECK (1 << 5) -# define MAC_SET_BL(X) (((X) & 0x3) << 6) -# define MAC_AUTO_PAD (1 << 8) -# define MAC_DISABLE_RETRY (1 << 10) -# define MAC_DISABLE_BCAST (1 << 11) -# define MAC_LATE_COL (1 << 12) -# define MAC_HASH_MODE (1 << 13) -# define MAC_HASH_ONLY (1 << 15) -# define MAC_PASS_ALL (1 << 16) -# define MAC_INVERSE_FILTER (1 << 17) -# define MAC_PROMISCUOUS (1 << 18) -# define MAC_PASS_ALL_MULTI (1 << 19) -# define MAC_FULL_DUPLEX (1 << 20) -# define MAC_NORMAL_MODE 0 -# define MAC_INT_LOOPBACK (1 << 21) -# define MAC_EXT_LOOPBACK (1 << 22) -# define MAC_DISABLE_RX_OWN (1 << 23) -# define MAC_BIG_ENDIAN (1 << 30) -# define MAC_RX_ALL (1 << 31) -#define MAC_ADDRESS_HIGH 0x4 -#define MAC_ADDRESS_LOW 0x8 -#define MAC_MCAST_HIGH 0xC -#define MAC_MCAST_LOW 0x10 -#define MAC_MII_CNTRL 0x14 -# define MAC_MII_BUSY (1 << 0) -# define MAC_MII_READ 0 -# define MAC_MII_WRITE (1 << 1) -# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6) -# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11) -#define MAC_MII_DATA 0x18 -#define MAC_FLOW_CNTRL 0x1C -# define MAC_FLOW_CNTRL_BUSY (1 << 0) -# define MAC_FLOW_CNTRL_ENABLE (1 << 1) -# define MAC_PASS_CONTROL (1 << 2) -# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16) -#define MAC_VLAN1_TAG 0x20 -#define MAC_VLAN2_TAG 0x24 - -/* Ethernet Controller Enable */ - -# define MAC_EN_CLOCK_ENABLE (1 << 0) -# define MAC_EN_RESET0 (1 << 1) -# define MAC_EN_TOSS (0 << 2) -# define MAC_EN_CACHEABLE (1 << 3) -# define MAC_EN_RESET1 (1 << 4) -# define MAC_EN_RESET2 (1 << 5) -# define MAC_DMA_RESET (1 << 6) - -/* Ethernet Controller DMA Channels */ - -#define MAC0_TX_DMA_ADDR 0xB4004000 -#define MAC1_TX_DMA_ADDR 0xB4004200 -/* offsets from MAC_TX_RING_ADDR address */ -#define MAC_TX_BUFF0_STATUS 0x0 -# define TX_FRAME_ABORTED (1 << 0) -# define TX_JAB_TIMEOUT (1 << 1) -# define TX_NO_CARRIER (1 << 2) -# define TX_LOSS_CARRIER (1 << 3) -# define TX_EXC_DEF (1 << 4) -# define TX_LATE_COLL_ABORT (1 << 5) -# define TX_EXC_COLL (1 << 6) -# define TX_UNDERRUN (1 << 7) -# define TX_DEFERRED (1 << 8) -# define TX_LATE_COLL (1 << 9) -# define TX_COLL_CNT_MASK (0xF << 10) -# define TX_PKT_RETRY (1 << 31) -#define MAC_TX_BUFF0_ADDR 0x4 -# define TX_DMA_ENABLE (1 << 0) -# define TX_T_DONE (1 << 1) -# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) -#define MAC_TX_BUFF0_LEN 0x8 -#define MAC_TX_BUFF1_STATUS 0x10 -#define MAC_TX_BUFF1_ADDR 0x14 -#define MAC_TX_BUFF1_LEN 0x18 -#define MAC_TX_BUFF2_STATUS 0x20 -#define MAC_TX_BUFF2_ADDR 0x24 -#define MAC_TX_BUFF2_LEN 0x28 -#define MAC_TX_BUFF3_STATUS 0x30 -#define MAC_TX_BUFF3_ADDR 0x34 -#define MAC_TX_BUFF3_LEN 0x38 - -#define MAC0_RX_DMA_ADDR 0xB4004100 -#define MAC1_RX_DMA_ADDR 0xB4004300 -/* offsets from MAC_RX_RING_ADDR */ -#define MAC_RX_BUFF0_STATUS 0x0 -# define RX_FRAME_LEN_MASK 0x3fff -# define RX_WDOG_TIMER (1 << 14) -# define RX_RUNT (1 << 15) -# define RX_OVERLEN (1 << 16) -# define RX_COLL (1 << 17) -# define RX_ETHER (1 << 18) -# define RX_MII_ERROR (1 << 19) -# define RX_DRIBBLING (1 << 20) -# define RX_CRC_ERROR (1 << 21) -# define RX_VLAN1 (1 << 22) -# define RX_VLAN2 (1 << 23) -# define RX_LEN_ERROR (1 << 24) -# define RX_CNTRL_FRAME (1 << 25) -# define RX_U_CNTRL_FRAME (1 << 26) -# define RX_MCAST_FRAME (1 << 27) -# define RX_BCAST_FRAME (1 << 28) -# define RX_FILTER_FAIL (1 << 29) -# define RX_PACKET_FILTER (1 << 30) -# define RX_MISSED_FRAME (1 << 31) - -# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ - RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ - RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) -#define MAC_RX_BUFF0_ADDR 0x4 -# define RX_DMA_ENABLE (1 << 0) -# define RX_T_DONE (1 << 1) -# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) -# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0) -#define MAC_RX_BUFF1_STATUS 0x10 -#define MAC_RX_BUFF1_ADDR 0x14 -#define MAC_RX_BUFF2_STATUS 0x20 -#define MAC_RX_BUFF2_ADDR 0x24 -#define MAC_RX_BUFF3_STATUS 0x30 -#define MAC_RX_BUFF3_ADDR 0x34 - -/* UARTS 0-3 */ -#define UART_BASE UART0_ADDR -#ifdef CONFIG_SOC_AU1200 -#define UART_DEBUG_BASE UART1_ADDR -#else -#define UART_DEBUG_BASE UART3_ADDR -#endif - -#define UART_RX 0 /* Receive buffer */ -#define UART_TX 4 /* Transmit buffer */ -#define UART_IER 8 /* Interrupt Enable Register */ -#define UART_IIR 0xC /* Interrupt ID Register */ -#define UART_FCR 0x10 /* FIFO Control Register */ -#define UART_LCR 0x14 /* Line Control Register */ -#define UART_MCR 0x18 /* Modem Control Register */ -#define UART_LSR 0x1C /* Line Status Register */ -#define UART_MSR 0x20 /* Modem Status Register */ -#define UART_CLK 0x28 /* Baud Rate Clock Divider */ -#define UART_MOD_CNTRL 0x100 /* Module Control */ - -#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ -#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ -#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ -#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ -#define UART_FCR_TRIGGER_MASK 0xF0 /* Mask for the FIFO trigger range */ -#define UART_FCR_R_TRIGGER_1 0x00 /* Mask for receive trigger set at 1 */ -#define UART_FCR_R_TRIGGER_4 0x40 /* Mask for receive trigger set at 4 */ -#define UART_FCR_R_TRIGGER_8 0x80 /* Mask for receive trigger set at 8 */ -#define UART_FCR_R_TRIGGER_14 0xA0 /* Mask for receive trigger set at 14 */ -#define UART_FCR_T_TRIGGER_0 0x00 /* Mask for transmit trigger set at 0 */ -#define UART_FCR_T_TRIGGER_4 0x10 /* Mask for transmit trigger set at 4 */ -#define UART_FCR_T_TRIGGER_8 0x20 /* Mask for transmit trigger set at 8 */ -#define UART_FCR_T_TRIGGER_12 0x30 /* Mask for transmit trigger set at 12 */ - -/* - * These are the definitions for the Line Control Register - */ -#define UART_LCR_SBC 0x40 /* Set break control */ -#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ -#define UART_LCR_EPAR 0x10 /* Even parity select */ -#define UART_LCR_PARITY 0x08 /* Parity Enable */ -#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ -#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ -#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ -#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ -#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ - -/* - * These are the definitions for the Line Status Register - */ -#define UART_LSR_TEMT 0x40 /* Transmitter empty */ -#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ -#define UART_LSR_BI 0x10 /* Break interrupt indicator */ -#define UART_LSR_FE 0x08 /* Frame error indicator */ -#define UART_LSR_PE 0x04 /* Parity error indicator */ -#define UART_LSR_OE 0x02 /* Overrun error indicator */ -#define UART_LSR_DR 0x01 /* Receiver data ready */ - -/* - * These are the definitions for the Interrupt Identification Register - */ -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ -#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ - -/* - * These are the definitions for the Interrupt Enable Register - */ -#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ -#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ -#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ -#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ - -/* - * These are the definitions for the Modem Control Register - */ -#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ -#define UART_MCR_OUT2 0x08 /* Out2 complement */ -#define UART_MCR_OUT1 0x04 /* Out1 complement */ -#define UART_MCR_RTS 0x02 /* RTS complement */ -#define UART_MCR_DTR 0x01 /* DTR complement */ - -/* - * These are the definitions for the Modem Status Register - */ -#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ -#define UART_MSR_RI 0x40 /* Ring Indicator */ -#define UART_MSR_DSR 0x20 /* Data Set Ready */ -#define UART_MSR_CTS 0x10 /* Clear to Send */ -#define UART_MSR_DDCD 0x08 /* Delta DCD */ -#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ -#define UART_MSR_DDSR 0x02 /* Delta DSR */ -#define UART_MSR_DCTS 0x01 /* Delta CTS */ -#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ - -/* SSIO */ -#define SSI0_STATUS 0xB1600000 -# define SSI_STATUS_BF (1 << 4) -# define SSI_STATUS_OF (1 << 3) -# define SSI_STATUS_UF (1 << 2) -# define SSI_STATUS_D (1 << 1) -# define SSI_STATUS_B (1 << 0) -#define SSI0_INT 0xB1600004 -# define SSI_INT_OI (1 << 3) -# define SSI_INT_UI (1 << 2) -# define SSI_INT_DI (1 << 1) -#define SSI0_INT_ENABLE 0xB1600008 -# define SSI_INTE_OIE (1 << 3) -# define SSI_INTE_UIE (1 << 2) -# define SSI_INTE_DIE (1 << 1) -#define SSI0_CONFIG 0xB1600020 -# define SSI_CONFIG_AO (1 << 24) -# define SSI_CONFIG_DO (1 << 23) -# define SSI_CONFIG_ALEN_BIT 20 -# define SSI_CONFIG_ALEN_MASK (0x7 << 20) -# define SSI_CONFIG_DLEN_BIT 16 -# define SSI_CONFIG_DLEN_MASK (0x7 << 16) -# define SSI_CONFIG_DD (1 << 11) -# define SSI_CONFIG_AD (1 << 10) -# define SSI_CONFIG_BM_BIT 8 -# define SSI_CONFIG_BM_MASK (0x3 << 8) -# define SSI_CONFIG_CE (1 << 7) -# define SSI_CONFIG_DP (1 << 6) -# define SSI_CONFIG_DL (1 << 5) -# define SSI_CONFIG_EP (1 << 4) -#define SSI0_ADATA 0xB1600024 -# define SSI_AD_D (1 << 24) -# define SSI_AD_ADDR_BIT 16 -# define SSI_AD_ADDR_MASK (0xff << 16) -# define SSI_AD_DATA_BIT 0 -# define SSI_AD_DATA_MASK (0xfff << 0) -#define SSI0_CLKDIV 0xB1600028 -#define SSI0_CONTROL 0xB1600100 -# define SSI_CONTROL_CD (1 << 1) -# define SSI_CONTROL_E (1 << 0) - -/* SSI1 */ -#define SSI1_STATUS 0xB1680000 -#define SSI1_INT 0xB1680004 -#define SSI1_INT_ENABLE 0xB1680008 -#define SSI1_CONFIG 0xB1680020 -#define SSI1_ADATA 0xB1680024 -#define SSI1_CLKDIV 0xB1680028 -#define SSI1_ENABLE 0xB1680100 - -/* - * Register content definitions - */ -#define SSI_STATUS_BF (1 << 4) -#define SSI_STATUS_OF (1 << 3) -#define SSI_STATUS_UF (1 << 2) -#define SSI_STATUS_D (1 << 1) -#define SSI_STATUS_B (1 << 0) - -/* SSI_INT */ -#define SSI_INT_OI (1 << 3) -#define SSI_INT_UI (1 << 2) -#define SSI_INT_DI (1 << 1) - -/* SSI_INTEN */ -#define SSI_INTEN_OIE (1 << 3) -#define SSI_INTEN_UIE (1 << 2) -#define SSI_INTEN_DIE (1 << 1) - -#define SSI_CONFIG_AO (1 << 24) -#define SSI_CONFIG_DO (1 << 23) -#define SSI_CONFIG_ALEN (7 << 20) -#define SSI_CONFIG_DLEN (15 << 16) -#define SSI_CONFIG_DD (1 << 11) -#define SSI_CONFIG_AD (1 << 10) -#define SSI_CONFIG_BM (3 << 8) -#define SSI_CONFIG_CE (1 << 7) -#define SSI_CONFIG_DP (1 << 6) -#define SSI_CONFIG_DL (1 << 5) -#define SSI_CONFIG_EP (1 << 4) -#define SSI_CONFIG_ALEN_N(N) ((N-1) << 20) -#define SSI_CONFIG_DLEN_N(N) ((N-1) << 16) -#define SSI_CONFIG_BM_HI (0 << 8) -#define SSI_CONFIG_BM_LO (1 << 8) -#define SSI_CONFIG_BM_CY (2 << 8) - -#define SSI_ADATA_D (1 << 24) -#define SSI_ADATA_ADDR (0xFF << 16) -#define SSI_ADATA_DATA 0x0FFF -#define SSI_ADATA_ADDR_N(N) (N << 16) - -#define SSI_ENABLE_CD (1 << 1) -#define SSI_ENABLE_E (1 << 0) - -/* IrDA Controller */ -#define IRDA_BASE 0xB0300000 -#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00) -#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04) -#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08) -#define IR_RING_SIZE (IRDA_BASE + 0x0C) -#define IR_RING_PROMPT (IRDA_BASE + 0x10) -#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14) -#define IR_INT_CLEAR (IRDA_BASE + 0x18) -#define IR_CONFIG_1 (IRDA_BASE + 0x20) -# define IR_RX_INVERT_LED (1 << 0) -# define IR_TX_INVERT_LED (1 << 1) -# define IR_ST (1 << 2) -# define IR_SF (1 << 3) -# define IR_SIR (1 << 4) -# define IR_MIR (1 << 5) -# define IR_FIR (1 << 6) -# define IR_16CRC (1 << 7) -# define IR_TD (1 << 8) -# define IR_RX_ALL (1 << 9) -# define IR_DMA_ENABLE (1 << 10) -# define IR_RX_ENABLE (1 << 11) -# define IR_TX_ENABLE (1 << 12) -# define IR_LOOPBACK (1 << 14) -# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ - IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) -#define IR_SIR_FLAGS (IRDA_BASE + 0x24) -#define IR_ENABLE (IRDA_BASE + 0x28) -# define IR_RX_STATUS (1 << 9) -# define IR_TX_STATUS (1 << 10) -#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C) -#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30) -#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34) -#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38) -#define IR_CONFIG_2 (IRDA_BASE + 0x3C) -# define IR_MODE_INV (1 << 0) -# define IR_ONE_PIN (1 << 1) -#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40) - -/* GPIO */ -#define SYS_PINFUNC 0xB190002C -# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */ -# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */ -# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */ -# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */ -# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */ -# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */ -# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */ -# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */ -# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */ -# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */ -# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */ -# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */ -# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */ -# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */ -# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */ -# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */ - -/* Au1100 only */ -# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */ -# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */ -# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */ -# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */ - -/* Au1550 only. Redefines lots of pins */ -# define SYS_PF_PSC2_MASK (7 << 17) -# define SYS_PF_PSC2_AC97 0 -# define SYS_PF_PSC2_SPI 0 -# define SYS_PF_PSC2_I2S (1 << 17) -# define SYS_PF_PSC2_SMBUS (3 << 17) -# define SYS_PF_PSC2_GPIO (7 << 17) -# define SYS_PF_PSC3_MASK (7 << 20) -# define SYS_PF_PSC3_AC97 0 -# define SYS_PF_PSC3_SPI 0 -# define SYS_PF_PSC3_I2S (1 << 20) -# define SYS_PF_PSC3_SMBUS (3 << 20) -# define SYS_PF_PSC3_GPIO (7 << 20) -# define SYS_PF_PSC1_S1 (1 << 1) -# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) - -/* Au1200 only */ -#ifdef CONFIG_SOC_AU1200 -#define SYS_PINFUNC_DMA (1 << 31) -#define SYS_PINFUNC_S0A (1 << 30) -#define SYS_PINFUNC_S1A (1 << 29) -#define SYS_PINFUNC_LP0 (1 << 28) -#define SYS_PINFUNC_LP1 (1 << 27) -#define SYS_PINFUNC_LD16 (1 << 26) -#define SYS_PINFUNC_LD8 (1 << 25) -#define SYS_PINFUNC_LD1 (1 << 24) -#define SYS_PINFUNC_LD0 (1 << 23) -#define SYS_PINFUNC_P1A (3 << 21) -#define SYS_PINFUNC_P1B (1 << 20) -#define SYS_PINFUNC_FS3 (1 << 19) -#define SYS_PINFUNC_P0A (3 << 17) -#define SYS_PINFUNC_CS (1 << 16) -#define SYS_PINFUNC_CIM (1 << 15) -#define SYS_PINFUNC_P1C (1 << 14) -#define SYS_PINFUNC_U1T (1 << 12) -#define SYS_PINFUNC_U1R (1 << 11) -#define SYS_PINFUNC_EX1 (1 << 10) -#define SYS_PINFUNC_EX0 (1 << 9) -#define SYS_PINFUNC_U0R (1 << 8) -#define SYS_PINFUNC_MC (1 << 7) -#define SYS_PINFUNC_S0B (1 << 6) -#define SYS_PINFUNC_S0C (1 << 5) -#define SYS_PINFUNC_P0B (1 << 4) -#define SYS_PINFUNC_U0T (1 << 3) -#define SYS_PINFUNC_S1B (1 << 2) -#endif - -#define SYS_TRIOUTRD 0xB1900100 -#define SYS_TRIOUTCLR 0xB1900100 -#define SYS_OUTPUTRD 0xB1900108 -#define SYS_OUTPUTSET 0xB1900108 -#define SYS_OUTPUTCLR 0xB190010C -#define SYS_PINSTATERD 0xB1900110 -#define SYS_PININPUTEN 0xB1900110 - -/* GPIO2, Au1500, Au1550 only */ -#define GPIO2_BASE 0xB1700000 -#define GPIO2_DIR (GPIO2_BASE + 0) -#define GPIO2_OUTPUT (GPIO2_BASE + 8) -#define GPIO2_PINSTATE (GPIO2_BASE + 0xC) -#define GPIO2_INTENABLE (GPIO2_BASE + 0x10) -#define GPIO2_ENABLE (GPIO2_BASE + 0x14) - -/* Power Management */ -#define SYS_SCRATCH0 0xB1900018 -#define SYS_SCRATCH1 0xB190001C -#define SYS_WAKEMSK 0xB1900034 -#define SYS_ENDIAN 0xB1900038 -#define SYS_POWERCTRL 0xB190003C -#define SYS_WAKESRC 0xB190005C -#define SYS_SLPPWR 0xB1900078 -#define SYS_SLEEP 0xB190007C - -/* Clock Controller */ -#define SYS_FREQCTRL0 0xB1900020 -# define SYS_FC_FRDIV2_BIT 22 -# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT) -# define SYS_FC_FE2 (1 << 21) -# define SYS_FC_FS2 (1 << 20) -# define SYS_FC_FRDIV1_BIT 12 -# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT) -# define SYS_FC_FE1 (1 << 11) -# define SYS_FC_FS1 (1 << 10) -# define SYS_FC_FRDIV0_BIT 2 -# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT) -# define SYS_FC_FE0 (1 << 1) -# define SYS_FC_FS0 (1 << 0) -#define SYS_FREQCTRL1 0xB1900024 -# define SYS_FC_FRDIV5_BIT 22 -# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT) -# define SYS_FC_FE5 (1 << 21) -# define SYS_FC_FS5 (1 << 20) -# define SYS_FC_FRDIV4_BIT 12 -# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT) -# define SYS_FC_FE4 (1 << 11) -# define SYS_FC_FS4 (1 << 10) -# define SYS_FC_FRDIV3_BIT 2 -# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT) -# define SYS_FC_FE3 (1 << 1) -# define SYS_FC_FS3 (1 << 0) -#define SYS_CLKSRC 0xB1900028 -# define SYS_CS_ME1_BIT 27 -# define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT) -# define SYS_CS_DE1 (1 << 26) -# define SYS_CS_CE1 (1 << 25) -# define SYS_CS_ME0_BIT 22 -# define SYS_CS_ME0_MASK (0x7 << SYS_CS_ME0_BIT) -# define SYS_CS_DE0 (1 << 21) -# define SYS_CS_CE0 (1 << 20) -# define SYS_CS_MI2_BIT 17 -# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT) -# define SYS_CS_DI2 (1 << 16) -# define SYS_CS_CI2 (1 << 15) -#ifdef CONFIG_SOC_AU1100 -# define SYS_CS_ML_BIT 7 -# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT) -# define SYS_CS_DL (1 << 6) -# define SYS_CS_CL (1 << 5) -#else -# define SYS_CS_MUH_BIT 12 -# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT) -# define SYS_CS_DUH (1 << 11) -# define SYS_CS_CUH (1 << 10) -# define SYS_CS_MUD_BIT 7 -# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT) -# define SYS_CS_DUD (1 << 6) -# define SYS_CS_CUD (1 << 5) -#endif -# define SYS_CS_MIR_BIT 2 -# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT) -# define SYS_CS_DIR (1 << 1) -# define SYS_CS_CIR (1 << 0) - -# define SYS_CS_MUX_AUX 0x1 -# define SYS_CS_MUX_FQ0 0x2 -# define SYS_CS_MUX_FQ1 0x3 -# define SYS_CS_MUX_FQ2 0x4 -# define SYS_CS_MUX_FQ3 0x5 -# define SYS_CS_MUX_FQ4 0x6 -# define SYS_CS_MUX_FQ5 0x7 -#define SYS_CPUPLL 0xB1900060 -#define SYS_AUXPLL 0xB1900064 - -/* AC97 Controller */ -#define AC97C_CONFIG 0xB0000000 -# define AC97C_RECV_SLOTS_BIT 13 -# define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT) -# define AC97C_XMIT_SLOTS_BIT 3 -# define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT) -# define AC97C_SG (1 << 2) -# define AC97C_SYNC (1 << 1) -# define AC97C_RESET (1 << 0) -#define AC97C_STATUS 0xB0000004 -# define AC97C_XU (1 << 11) -# define AC97C_XO (1 << 10) -# define AC97C_RU (1 << 9) -# define AC97C_RO (1 << 8) -# define AC97C_READY (1 << 7) -# define AC97C_CP (1 << 6) -# define AC97C_TR (1 << 5) -# define AC97C_TE (1 << 4) -# define AC97C_TF (1 << 3) -# define AC97C_RR (1 << 2) -# define AC97C_RE (1 << 1) -# define AC97C_RF (1 << 0) -#define AC97C_DATA 0xB0000008 -#define AC97C_CMD 0xB000000C -# define AC97C_WD_BIT 16 -# define AC97C_READ (1 << 7) -# define AC97C_INDEX_MASK 0x7f -#define AC97C_CNTRL 0xB0000010 -# define AC97C_RS (1 << 1) -# define AC97C_CE (1 << 0) - -/* Secure Digital (SD) Controller */ -#define SD0_XMIT_FIFO 0xB0600000 -#define SD0_RECV_FIFO 0xB0600004 -#define SD1_XMIT_FIFO 0xB0680000 -#define SD1_RECV_FIFO 0xB0680004 - -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) -/* Au1500 PCI Controller */ -#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */ -#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) -#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) -# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \ - (1 << 25) | (1 << 26) | (1 << 27)) -#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) -#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) -#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) -#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) -#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18) -#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) -#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) -#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) -#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) -#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) -#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) -#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) - -#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */ - -/* - * All of our structures, like PCI resource, have 32-bit members. - * Drivers are expected to do an ioremap on the PCI MEM resource, but it's - * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch - * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and - * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM - * addresses. For PCI I/O, it's simpler because we get to do the ioremap - * ourselves and then adjust the device's resources. - */ -#define Au1500_EXT_CFG 0x600000000ULL -#define Au1500_EXT_CFG_TYPE1 0x680000000ULL -#define Au1500_PCI_IO_START 0x500000000ULL -#define Au1500_PCI_IO_END 0x5000FFFFFULL -#define Au1500_PCI_MEM_START 0x440000000ULL -#define Au1500_PCI_MEM_END 0x44FFFFFFFULL - -#define PCI_IO_START 0x00001000 -#define PCI_IO_END 0x000FFFFF -#define PCI_MEM_START 0x40000000 -#define PCI_MEM_END 0x4FFFFFFF - -#define PCI_FIRST_DEVFN (0 << 3) -#define PCI_LAST_DEVFN (19 << 3) - -#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ -#define IOPORT_RESOURCE_END 0xffffffff -#define IOMEM_RESOURCE_START 0x10000000 -#define IOMEM_RESOURCE_END 0xffffffff - -#else /* Au1000 and Au1100 and Au1200 */ - -/* Don't allow any legacy ports probing */ -#define IOPORT_RESOURCE_START 0x10000000 -#define IOPORT_RESOURCE_END 0xffffffff -#define IOMEM_RESOURCE_START 0x10000000 -#define IOMEM_RESOURCE_END 0xffffffff - -#define PCI_IO_START 0 -#define PCI_IO_END 0 -#define PCI_MEM_START 0 -#define PCI_MEM_END 0 -#define PCI_FIRST_DEVFN 0 -#define PCI_LAST_DEVFN 0 - -#endif - -#ifndef _LANGUAGE_ASSEMBLY -typedef volatile struct { - /* 0x0000 */ u32 toytrim; - /* 0x0004 */ u32 toywrite; - /* 0x0008 */ u32 toymatch0; - /* 0x000C */ u32 toymatch1; - /* 0x0010 */ u32 toymatch2; - /* 0x0014 */ u32 cntrctrl; - /* 0x0018 */ u32 scratch0; - /* 0x001C */ u32 scratch1; - /* 0x0020 */ u32 freqctrl0; - /* 0x0024 */ u32 freqctrl1; - /* 0x0028 */ u32 clksrc; - /* 0x002C */ u32 pinfunc; - /* 0x0030 */ u32 reserved0; - /* 0x0034 */ u32 wakemsk; - /* 0x0038 */ u32 endian; - /* 0x003C */ u32 powerctrl; - /* 0x0040 */ u32 toyread; - /* 0x0044 */ u32 rtctrim; - /* 0x0048 */ u32 rtcwrite; - /* 0x004C */ u32 rtcmatch0; - /* 0x0050 */ u32 rtcmatch1; - /* 0x0054 */ u32 rtcmatch2; - /* 0x0058 */ u32 rtcread; - /* 0x005C */ u32 wakesrc; - /* 0x0060 */ u32 cpupll; - /* 0x0064 */ u32 auxpll; - /* 0x0068 */ u32 reserved1; - /* 0x006C */ u32 reserved2; - /* 0x0070 */ u32 reserved3; - /* 0x0074 */ u32 reserved4; - /* 0x0078 */ u32 slppwr; - /* 0x007C */ u32 sleep; - /* 0x0080 */ u32 reserved5[32]; - /* 0x0100 */ u32 trioutrd; -#define trioutclr trioutrd - /* 0x0104 */ u32 reserved6; - /* 0x0108 */ u32 outputrd; -#define outputset outputrd - /* 0x010C */ u32 outputclr; - /* 0x0110 */ u32 pinstaterd; -#define pininputen pinstaterd -} AU1X00_SYS; - -static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE; - -#endif - -/* - * Processor information based on PRID. - * Copied from PowerPC. - */ -#ifndef _LANGUAGE_ASSEMBLY -struct cpu_spec { - /* CPU is matched via (PRID & prid_mask) == prid_value */ - unsigned int prid_mask; - unsigned int prid_value; - - char *cpu_name; - unsigned char cpu_od; /* Set Config[OD] */ - unsigned char cpu_bclk; /* Enable BCLK switching */ - unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */ -}; - -extern struct cpu_spec cpu_specs[]; -extern struct cpu_spec *cur_cpu_spec[]; -#endif - -#endif diff --git a/include/asm-mips/mach-au1x00/au1000_dma.h b/include/asm-mips/mach-au1x00/au1000_dma.h deleted file mode 100644 index c333b4e1cd44..000000000000 --- a/include/asm-mips/mach-au1x00/au1000_dma.h +++ /dev/null @@ -1,458 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Defines for using and allocating DMA channels on the Alchemy - * Au1x00 MIPS processors. - * - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#ifndef __ASM_AU1000_DMA_H -#define __ASM_AU1000_DMA_H - -#include /* need byte IO */ -#include /* And spinlocks */ -#include -#include - -#define NUM_AU1000_DMA_CHANNELS 8 - -/* DMA Channel Base Addresses */ -#define DMA_CHANNEL_BASE 0xB4002000 -#define DMA_CHANNEL_LEN 0x00000100 - -/* DMA Channel Register Offsets */ -#define DMA_MODE_SET 0x00000000 -#define DMA_MODE_READ DMA_MODE_SET -#define DMA_MODE_CLEAR 0x00000004 -/* DMA Mode register bits follow */ -#define DMA_DAH_MASK (0x0f << 20) -#define DMA_DID_BIT 16 -#define DMA_DID_MASK (0x0f << DMA_DID_BIT) -#define DMA_DS (1 << 15) -#define DMA_BE (1 << 13) -#define DMA_DR (1 << 12) -#define DMA_TS8 (1 << 11) -#define DMA_DW_BIT 9 -#define DMA_DW_MASK (0x03 << DMA_DW_BIT) -#define DMA_DW8 (0 << DMA_DW_BIT) -#define DMA_DW16 (1 << DMA_DW_BIT) -#define DMA_DW32 (2 << DMA_DW_BIT) -#define DMA_NC (1 << 8) -#define DMA_IE (1 << 7) -#define DMA_HALT (1 << 6) -#define DMA_GO (1 << 5) -#define DMA_AB (1 << 4) -#define DMA_D1 (1 << 3) -#define DMA_BE1 (1 << 2) -#define DMA_D0 (1 << 1) -#define DMA_BE0 (1 << 0) - -#define DMA_PERIPHERAL_ADDR 0x00000008 -#define DMA_BUFFER0_START 0x0000000C -#define DMA_BUFFER1_START 0x00000014 -#define DMA_BUFFER0_COUNT 0x00000010 -#define DMA_BUFFER1_COUNT 0x00000018 -#define DMA_BAH_BIT 16 -#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT) -#define DMA_COUNT_BIT 0 -#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT) - -/* DMA Device IDs follow */ -enum { - DMA_ID_UART0_TX = 0, - DMA_ID_UART0_RX, - DMA_ID_GP04, - DMA_ID_GP05, - DMA_ID_AC97C_TX, - DMA_ID_AC97C_RX, - DMA_ID_UART3_TX, - DMA_ID_UART3_RX, - DMA_ID_USBDEV_EP0_RX, - DMA_ID_USBDEV_EP0_TX, - DMA_ID_USBDEV_EP2_TX, - DMA_ID_USBDEV_EP3_TX, - DMA_ID_USBDEV_EP4_RX, - DMA_ID_USBDEV_EP5_RX, - DMA_ID_I2S_TX, - DMA_ID_I2S_RX, - DMA_NUM_DEV -}; - -/* DMA Device ID's for 2nd bank (AU1100) follow */ -enum { - DMA_ID_SD0_TX = 0, - DMA_ID_SD0_RX, - DMA_ID_SD1_TX, - DMA_ID_SD1_RX, - DMA_NUM_DEV_BANK2 -}; - -struct dma_chan { - int dev_id; /* this channel is allocated if >= 0, */ - /* free otherwise */ - unsigned int io; - const char *dev_str; - int irq; - void *irq_dev; - unsigned int fifo_addr; - unsigned int mode; -}; - -/* These are in arch/mips/au1000/common/dma.c */ -extern struct dma_chan au1000_dma_table[]; -extern int request_au1000_dma(int dev_id, - const char *dev_str, - irq_handler_t irqhandler, - unsigned long irqflags, - void *irq_dev_id); -extern void free_au1000_dma(unsigned int dmanr); -extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos, - int length, int *eof, void *data); -extern void dump_au1000_dma_channel(unsigned int dmanr); -extern spinlock_t au1000_dma_spin_lock; - -static inline struct dma_chan *get_dma_chan(unsigned int dmanr) -{ - if (dmanr >= NUM_AU1000_DMA_CHANNELS || - au1000_dma_table[dmanr].dev_id < 0) - return NULL; - return &au1000_dma_table[dmanr]; -} - -static inline unsigned long claim_dma_lock(void) -{ - unsigned long flags; - - spin_lock_irqsave(&au1000_dma_spin_lock, flags); - return flags; -} - -static inline void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&au1000_dma_spin_lock, flags); -} - -/* - * Set the DMA buffer enable bits in the mode register. - */ -static inline void enable_dma_buffer0(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(DMA_BE0, chan->io + DMA_MODE_SET); -} - -static inline void enable_dma_buffer1(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(DMA_BE1, chan->io + DMA_MODE_SET); -} -static inline void enable_dma_buffers(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET); -} - -static inline void start_dma(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(DMA_GO, chan->io + DMA_MODE_SET); -} - -#define DMA_HALT_POLL 0x5000 - -static inline void halt_dma(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - int i; - - if (!chan) - return; - au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR); - - /* Poll the halt bit */ - for (i = 0; i < DMA_HALT_POLL; i++) - if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) - break; - if (i == DMA_HALT_POLL) - printk(KERN_INFO "halt_dma: HALT poll expired!\n"); -} - -static inline void disable_dma(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - - halt_dma(dmanr); - - /* Now we can disable the buffers */ - au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR); -} - -static inline int dma_halted(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return 1; - return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0; -} - -/* Initialize a DMA channel. */ -static inline void init_dma(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - u32 mode; - - if (!chan) - return; - - disable_dma(dmanr); - - /* Set device FIFO address */ - au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR); - - mode = chan->mode | (chan->dev_id << DMA_DID_BIT); - if (chan->irq) - mode |= DMA_IE; - - au_writel(~mode, chan->io + DMA_MODE_CLEAR); - au_writel(mode, chan->io + DMA_MODE_SET); -} - -/* - * Set mode for a specific DMA channel - */ -static inline void set_dma_mode(unsigned int dmanr, unsigned int mode) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - /* - * set_dma_mode is only allowed to change endianess, direction, - * transfer size, device FIFO width, and coherency settings. - * Make sure anything else is masked off. - */ - mode &= (DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC); - chan->mode &= ~(DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC); - chan->mode |= mode; -} - -static inline unsigned int get_dma_mode(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return 0; - return chan->mode; -} - -static inline int get_dma_active_buffer(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return -1; - return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0; -} - -/* - * Set the device FIFO address for a specific DMA channel - only - * applicable to GPO4 and GPO5. All the other devices have fixed - * FIFO addresses. - */ -static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - - if (chan->mode & DMA_DS) /* second bank of device IDs */ - return; - - if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05) - return; - - au_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR); -} - -/* - * Clear the DMA buffer done bits in the mode register. - */ -static inline void clear_dma_done0(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR); -} - -static inline void clear_dma_done1(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR); -} - -/* - * This does nothing - not applicable to Au1000 DMA. - */ -static inline void set_dma_page(unsigned int dmanr, char pagenr) -{ -} - -/* - * Set Buffer 0 transfer address for specific DMA channel. - */ -static inline void set_dma_addr0(unsigned int dmanr, unsigned int a) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(a, chan->io + DMA_BUFFER0_START); -} - -/* - * Set Buffer 1 transfer address for specific DMA channel. - */ -static inline void set_dma_addr1(unsigned int dmanr, unsigned int a) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(a, chan->io + DMA_BUFFER1_START); -} - - -/* - * Set Buffer 0 transfer size (max 64k) for a specific DMA channel. - */ -static inline void set_dma_count0(unsigned int dmanr, unsigned int count) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - count &= DMA_COUNT_MASK; - au_writel(count, chan->io + DMA_BUFFER0_COUNT); -} - -/* - * Set Buffer 1 transfer size (max 64k) for a specific DMA channel. - */ -static inline void set_dma_count1(unsigned int dmanr, unsigned int count) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - count &= DMA_COUNT_MASK; - au_writel(count, chan->io + DMA_BUFFER1_COUNT); -} - -/* - * Set both buffer transfer sizes (max 64k) for a specific DMA channel. - */ -static inline void set_dma_count(unsigned int dmanr, unsigned int count) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - count &= DMA_COUNT_MASK; - au_writel(count, chan->io + DMA_BUFFER0_COUNT); - au_writel(count, chan->io + DMA_BUFFER1_COUNT); -} - -/* - * Returns which buffer has its done bit set in the mode register. - * Returns -1 if neither or both done bits set. - */ -static inline unsigned int get_dma_buffer_done(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return 0; - return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1); -} - - -/* - * Returns the DMA channel's Buffer Done IRQ number. - */ -static inline int get_dma_done_irq(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return -1; - return chan->irq; -} - -/* - * Get DMA residue count. Returns the number of _bytes_ left to transfer. - */ -static inline int get_dma_residue(unsigned int dmanr) -{ - int curBufCntReg, count; - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return 0; - - curBufCntReg = (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? - DMA_BUFFER1_COUNT : DMA_BUFFER0_COUNT; - - count = au_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK; - - if ((chan->mode & DMA_DW_MASK) == DMA_DW16) - count <<= 1; - else if ((chan->mode & DMA_DW_MASK) == DMA_DW32) - count <<= 2; - - return count; -} - -#endif /* __ASM_AU1000_DMA_H */ diff --git a/include/asm-mips/mach-au1x00/au1000_gpio.h b/include/asm-mips/mach-au1x00/au1000_gpio.h deleted file mode 100644 index d8c96fda5549..000000000000 --- a/include/asm-mips/mach-au1x00/au1000_gpio.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * FILE NAME au1000_gpio.h - * - * BRIEF MODULE DESCRIPTION - * API to Alchemy Au1xx0 GPIO device. - * - * Author: MontaVista Software, Inc. - * Steve Longerbeam - * - * Copyright 2001, 2008 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __AU1000_GPIO_H -#define __AU1000_GPIO_H - -#include - -#define AU1000GPIO_IOC_MAGIC 'A' - -#define AU1000GPIO_IN _IOR(AU1000GPIO_IOC_MAGIC, 0, int) -#define AU1000GPIO_SET _IOW(AU1000GPIO_IOC_MAGIC, 1, int) -#define AU1000GPIO_CLEAR _IOW(AU1000GPIO_IOC_MAGIC, 2, int) -#define AU1000GPIO_OUT _IOW(AU1000GPIO_IOC_MAGIC, 3, int) -#define AU1000GPIO_TRISTATE _IOW(AU1000GPIO_IOC_MAGIC, 4, int) -#define AU1000GPIO_AVAIL_MASK _IOR(AU1000GPIO_IOC_MAGIC, 5, int) - -#ifdef __KERNEL__ -extern u32 get_au1000_avail_gpio_mask(void); -extern int au1000gpio_tristate(u32 data); -extern int au1000gpio_in(u32 *data); -extern int au1000gpio_set(u32 data); -extern int au1000gpio_clear(u32 data); -extern int au1000gpio_out(u32 data); -#endif - -#endif diff --git a/include/asm-mips/mach-au1x00/au1100_mmc.h b/include/asm-mips/mach-au1x00/au1100_mmc.h deleted file mode 100644 index c35e20918490..000000000000 --- a/include/asm-mips/mach-au1x00/au1100_mmc.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Defines for using the MMC/SD controllers on the - * Alchemy Au1100 mips processor. - * - * Copyright (c) 2003 Embedded Edge, LLC. - * Author: Embedded Edge, LLC. - * dan@embeddededge.com or tim@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -/* - * AU1100 MMC/SD definitions. - * - * From "AMD Alchemy Solutions Au1100 Processor Data Book - Preliminary" - * June, 2003 - */ - -#ifndef __ASM_AU1100_MMC_H -#define __ASM_AU1100_MMC_H - -#include - -struct au1xmmc_platform_data { - int(*cd_setup)(void *mmc_host, int on); - int(*card_inserted)(void *mmc_host); - int(*card_readonly)(void *mmc_host); - void(*set_power)(void *mmc_host, int state); - struct led_classdev *led; -}; - -#define SD0_BASE 0xB0600000 -#define SD1_BASE 0xB0680000 - - -/* - * Register offsets. - */ -#define SD_TXPORT (0x0000) -#define SD_RXPORT (0x0004) -#define SD_CONFIG (0x0008) -#define SD_ENABLE (0x000C) -#define SD_CONFIG2 (0x0010) -#define SD_BLKSIZE (0x0014) -#define SD_STATUS (0x0018) -#define SD_DEBUG (0x001C) -#define SD_CMD (0x0020) -#define SD_CMDARG (0x0024) -#define SD_RESP3 (0x0028) -#define SD_RESP2 (0x002C) -#define SD_RESP1 (0x0030) -#define SD_RESP0 (0x0034) -#define SD_TIMEOUT (0x0038) - - -/* - * SD_TXPORT bit definitions. - */ -#define SD_TXPORT_TXD (0x000000ff) - - -/* - * SD_RXPORT bit definitions. - */ -#define SD_RXPORT_RXD (0x000000ff) - - -/* - * SD_CONFIG bit definitions. - */ -#define SD_CONFIG_DIV (0x000001ff) -#define SD_CONFIG_DE (0x00000200) -#define SD_CONFIG_NE (0x00000400) -#define SD_CONFIG_TU (0x00000800) -#define SD_CONFIG_TO (0x00001000) -#define SD_CONFIG_RU (0x00002000) -#define SD_CONFIG_RO (0x00004000) -#define SD_CONFIG_I (0x00008000) -#define SD_CONFIG_CR (0x00010000) -#define SD_CONFIG_RAT (0x00020000) -#define SD_CONFIG_DD (0x00040000) -#define SD_CONFIG_DT (0x00080000) -#define SD_CONFIG_SC (0x00100000) -#define SD_CONFIG_RC (0x00200000) -#define SD_CONFIG_WC (0x00400000) -#define SD_CONFIG_xxx (0x00800000) -#define SD_CONFIG_TH (0x01000000) -#define SD_CONFIG_TE (0x02000000) -#define SD_CONFIG_TA (0x04000000) -#define SD_CONFIG_RH (0x08000000) -#define SD_CONFIG_RA (0x10000000) -#define SD_CONFIG_RF (0x20000000) -#define SD_CONFIG_CD (0x40000000) -#define SD_CONFIG_SI (0x80000000) - - -/* - * SD_ENABLE bit definitions. - */ -#define SD_ENABLE_CE (0x00000001) -#define SD_ENABLE_R (0x00000002) - - -/* - * SD_CONFIG2 bit definitions. - */ -#define SD_CONFIG2_EN (0x00000001) -#define SD_CONFIG2_FF (0x00000002) -#define SD_CONFIG2_xx1 (0x00000004) -#define SD_CONFIG2_DF (0x00000008) -#define SD_CONFIG2_DC (0x00000010) -#define SD_CONFIG2_xx2 (0x000000e0) -#define SD_CONFIG2_WB (0x00000100) -#define SD_CONFIG2_RW (0x00000200) - - -/* - * SD_BLKSIZE bit definitions. - */ -#define SD_BLKSIZE_BS (0x000007ff) -#define SD_BLKSIZE_BS_SHIFT (0) -#define SD_BLKSIZE_BC (0x01ff0000) -#define SD_BLKSIZE_BC_SHIFT (16) - - -/* - * SD_STATUS bit definitions. - */ -#define SD_STATUS_DCRCW (0x00000007) -#define SD_STATUS_xx1 (0x00000008) -#define SD_STATUS_CB (0x00000010) -#define SD_STATUS_DB (0x00000020) -#define SD_STATUS_CF (0x00000040) -#define SD_STATUS_D3 (0x00000080) -#define SD_STATUS_xx2 (0x00000300) -#define SD_STATUS_NE (0x00000400) -#define SD_STATUS_TU (0x00000800) -#define SD_STATUS_TO (0x00001000) -#define SD_STATUS_RU (0x00002000) -#define SD_STATUS_RO (0x00004000) -#define SD_STATUS_I (0x00008000) -#define SD_STATUS_CR (0x00010000) -#define SD_STATUS_RAT (0x00020000) -#define SD_STATUS_DD (0x00040000) -#define SD_STATUS_DT (0x00080000) -#define SD_STATUS_SC (0x00100000) -#define SD_STATUS_RC (0x00200000) -#define SD_STATUS_WC (0x00400000) -#define SD_STATUS_xx3 (0x00800000) -#define SD_STATUS_TH (0x01000000) -#define SD_STATUS_TE (0x02000000) -#define SD_STATUS_TA (0x04000000) -#define SD_STATUS_RH (0x08000000) -#define SD_STATUS_RA (0x10000000) -#define SD_STATUS_RF (0x20000000) -#define SD_STATUS_CD (0x40000000) -#define SD_STATUS_SI (0x80000000) - - -/* - * SD_CMD bit definitions. - */ -#define SD_CMD_GO (0x00000001) -#define SD_CMD_RY (0x00000002) -#define SD_CMD_xx1 (0x0000000c) -#define SD_CMD_CT_MASK (0x000000f0) -#define SD_CMD_CT_0 (0x00000000) -#define SD_CMD_CT_1 (0x00000010) -#define SD_CMD_CT_2 (0x00000020) -#define SD_CMD_CT_3 (0x00000030) -#define SD_CMD_CT_4 (0x00000040) -#define SD_CMD_CT_5 (0x00000050) -#define SD_CMD_CT_6 (0x00000060) -#define SD_CMD_CT_7 (0x00000070) -#define SD_CMD_CI (0x0000ff00) -#define SD_CMD_CI_SHIFT (8) -#define SD_CMD_RT_MASK (0x00ff0000) -#define SD_CMD_RT_0 (0x00000000) -#define SD_CMD_RT_1 (0x00010000) -#define SD_CMD_RT_2 (0x00020000) -#define SD_CMD_RT_3 (0x00030000) -#define SD_CMD_RT_4 (0x00040000) -#define SD_CMD_RT_5 (0x00050000) -#define SD_CMD_RT_6 (0x00060000) -#define SD_CMD_RT_1B (0x00810000) - - -#endif /* __ASM_AU1100_MMC_H */ - diff --git a/include/asm-mips/mach-au1x00/au1550_spi.h b/include/asm-mips/mach-au1x00/au1550_spi.h deleted file mode 100644 index 08e1958e9410..000000000000 --- a/include/asm-mips/mach-au1x00/au1550_spi.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure - */ - -#ifndef _AU1550_SPI_H_ -#define _AU1550_SPI_H_ - -struct au1550_spi_info { - u32 mainclk_hz; /* main input clock frequency of PSC */ - u16 num_chipselect; /* number of chipselects supported */ - void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity); - void (*deactivate_cs)(struct au1550_spi_info *spi, int cs, int polarity); -}; - -#endif diff --git a/include/asm-mips/mach-au1x00/au1xxx.h b/include/asm-mips/mach-au1x00/au1xxx.h deleted file mode 100644 index 1b3655090ed3..000000000000 --- a/include/asm-mips/mach-au1x00/au1xxx.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _AU1XXX_H_ -#define _AU1XXX_H_ - -#include - -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \ - defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) -#include - -#elif defined(CONFIG_MIPS_PB1550) -#include - -#elif defined(CONFIG_MIPS_PB1200) -#include - -#elif defined(CONFIG_MIPS_DB1200) -#include - -#endif - -#endif /* _AU1XXX_H_ */ diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h deleted file mode 100644 index 44a67bf05dc1..000000000000 --- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h +++ /dev/null @@ -1,386 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Include file for Alchemy Semiconductor's Au1550 Descriptor - * Based DMA Controller. - * - * Copyright 2004 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* - * Specifics for the Au1xxx Descriptor-Based DMA Controller, - * first seen in the AU1550 part. - */ -#ifndef _AU1000_DBDMA_H_ -#define _AU1000_DBDMA_H_ - -#ifndef _LANGUAGE_ASSEMBLY - -/* - * The DMA base addresses. - * The channels are every 256 bytes (0x0100) from the channel 0 base. - * Interrupt status/enable is bits 15:0 for channels 15 to zero. - */ -#define DDMA_GLOBAL_BASE 0xb4003000 -#define DDMA_CHANNEL_BASE 0xb4002000 - -typedef volatile struct dbdma_global { - u32 ddma_config; - u32 ddma_intstat; - u32 ddma_throttle; - u32 ddma_inten; -} dbdma_global_t; - -/* General Configuration. */ -#define DDMA_CONFIG_AF (1 << 2) -#define DDMA_CONFIG_AH (1 << 1) -#define DDMA_CONFIG_AL (1 << 0) - -#define DDMA_THROTTLE_EN (1 << 31) - -/* The structure of a DMA Channel. */ -typedef volatile struct au1xxx_dma_channel { - u32 ddma_cfg; /* See below */ - u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */ - u32 ddma_statptr; /* word aligned pointer to status word */ - u32 ddma_dbell; /* A write activates channel operation */ - u32 ddma_irq; /* If bit 0 set, interrupt pending */ - u32 ddma_stat; /* See below */ - u32 ddma_bytecnt; /* Byte count, valid only when chan idle */ - /* Remainder, up to the 256 byte boundary, is reserved. */ -} au1x_dma_chan_t; - -#define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */ -#define DDMA_CFG_SP (1 << 8) /* source DMA polarity */ -#define DDMA_CFG_DED (1 << 7) /* destination DMA level/edge detect */ -#define DDMA_CFG_DP (1 << 6) /* destination DMA polarity */ -#define DDMA_CFG_SYNC (1 << 5) /* Sync static bus controller */ -#define DDMA_CFG_PPR (1 << 4) /* PCI posted read/write control */ -#define DDMA_CFG_DFN (1 << 3) /* Descriptor fetch non-coherent */ -#define DDMA_CFG_SBE (1 << 2) /* Source big endian */ -#define DDMA_CFG_DBE (1 << 1) /* Destination big endian */ -#define DDMA_CFG_EN (1 << 0) /* Channel enable */ - -/* - * Always set when descriptor processing done, regardless of - * interrupt enable state. Reflected in global intstat, don't - * clear this until global intstat is read/used. - */ -#define DDMA_IRQ_IN (1 << 0) - -#define DDMA_STAT_DB (1 << 2) /* Doorbell pushed */ -#define DDMA_STAT_V (1 << 1) /* Descriptor valid */ -#define DDMA_STAT_H (1 << 0) /* Channel Halted */ - -/* - * "Standard" DDMA Descriptor. - * Must be 32-byte aligned. - */ -typedef volatile struct au1xxx_ddma_desc { - u32 dscr_cmd0; /* See below */ - u32 dscr_cmd1; /* See below */ - u32 dscr_source0; /* source phys address */ - u32 dscr_source1; /* See below */ - u32 dscr_dest0; /* Destination address */ - u32 dscr_dest1; /* See below */ - u32 dscr_stat; /* completion status */ - u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */ - /* - * First 32 bytes are HW specific!!! - * Lets have some SW data following -- make sure it's 32 bytes. - */ - u32 sw_status; - u32 sw_context; - u32 sw_reserved[6]; -} au1x_ddma_desc_t; - -#define DSCR_CMD0_V (1 << 31) /* Descriptor valid */ -#define DSCR_CMD0_MEM (1 << 30) /* mem-mem transfer */ -#define DSCR_CMD0_SID_MASK (0x1f << 25) /* Source ID */ -#define DSCR_CMD0_DID_MASK (0x1f << 20) /* Destination ID */ -#define DSCR_CMD0_SW_MASK (0x3 << 18) /* Source Width */ -#define DSCR_CMD0_DW_MASK (0x3 << 16) /* Destination Width */ -#define DSCR_CMD0_ARB (0x1 << 15) /* Set for Hi Pri */ -#define DSCR_CMD0_DT_MASK (0x3 << 13) /* Descriptor Type */ -#define DSCR_CMD0_SN (0x1 << 12) /* Source non-coherent */ -#define DSCR_CMD0_DN (0x1 << 11) /* Destination non-coherent */ -#define DSCR_CMD0_SM (0x1 << 10) /* Stride mode */ -#define DSCR_CMD0_IE (0x1 << 8) /* Interrupt Enable */ -#define DSCR_CMD0_SP (0x1 << 4) /* Status pointer select */ -#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */ -#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */ - -#define SW_STATUS_INUSE (1 << 0) - -/* Command 0 device IDs. */ -#ifdef CONFIG_SOC_AU1550 -#define DSCR_CMD0_UART0_TX 0 -#define DSCR_CMD0_UART0_RX 1 -#define DSCR_CMD0_UART3_TX 2 -#define DSCR_CMD0_UART3_RX 3 -#define DSCR_CMD0_DMA_REQ0 4 -#define DSCR_CMD0_DMA_REQ1 5 -#define DSCR_CMD0_DMA_REQ2 6 -#define DSCR_CMD0_DMA_REQ3 7 -#define DSCR_CMD0_USBDEV_RX0 8 -#define DSCR_CMD0_USBDEV_TX0 9 -#define DSCR_CMD0_USBDEV_TX1 10 -#define DSCR_CMD0_USBDEV_TX2 11 -#define DSCR_CMD0_USBDEV_RX3 12 -#define DSCR_CMD0_USBDEV_RX4 13 -#define DSCR_CMD0_PSC0_TX 14 -#define DSCR_CMD0_PSC0_RX 15 -#define DSCR_CMD0_PSC1_TX 16 -#define DSCR_CMD0_PSC1_RX 17 -#define DSCR_CMD0_PSC2_TX 18 -#define DSCR_CMD0_PSC2_RX 19 -#define DSCR_CMD0_PSC3_TX 20 -#define DSCR_CMD0_PSC3_RX 21 -#define DSCR_CMD0_PCI_WRITE 22 -#define DSCR_CMD0_NAND_FLASH 23 -#define DSCR_CMD0_MAC0_RX 24 -#define DSCR_CMD0_MAC0_TX 25 -#define DSCR_CMD0_MAC1_RX 26 -#define DSCR_CMD0_MAC1_TX 27 -#endif /* CONFIG_SOC_AU1550 */ - -#ifdef CONFIG_SOC_AU1200 -#define DSCR_CMD0_UART0_TX 0 -#define DSCR_CMD0_UART0_RX 1 -#define DSCR_CMD0_UART1_TX 2 -#define DSCR_CMD0_UART1_RX 3 -#define DSCR_CMD0_DMA_REQ0 4 -#define DSCR_CMD0_DMA_REQ1 5 -#define DSCR_CMD0_MAE_BE 6 -#define DSCR_CMD0_MAE_FE 7 -#define DSCR_CMD0_SDMS_TX0 8 -#define DSCR_CMD0_SDMS_RX0 9 -#define DSCR_CMD0_SDMS_TX1 10 -#define DSCR_CMD0_SDMS_RX1 11 -#define DSCR_CMD0_AES_TX 13 -#define DSCR_CMD0_AES_RX 12 -#define DSCR_CMD0_PSC0_TX 14 -#define DSCR_CMD0_PSC0_RX 15 -#define DSCR_CMD0_PSC1_TX 16 -#define DSCR_CMD0_PSC1_RX 17 -#define DSCR_CMD0_CIM_RXA 18 -#define DSCR_CMD0_CIM_RXB 19 -#define DSCR_CMD0_CIM_RXC 20 -#define DSCR_CMD0_MAE_BOTH 21 -#define DSCR_CMD0_LCD 22 -#define DSCR_CMD0_NAND_FLASH 23 -#define DSCR_CMD0_PSC0_SYNC 24 -#define DSCR_CMD0_PSC1_SYNC 25 -#define DSCR_CMD0_CIM_SYNC 26 -#endif /* CONFIG_SOC_AU1200 */ - -#define DSCR_CMD0_THROTTLE 30 -#define DSCR_CMD0_ALWAYS 31 -#define DSCR_NDEV_IDS 32 -/* This macro is used to find/create custom device types */ -#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \ - ((d) & 0xFF)) -#define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF) - -#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25) -#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20) - -/* Source/Destination transfer width. */ -#define DSCR_CMD0_BYTE 0 -#define DSCR_CMD0_HALFWORD 1 -#define DSCR_CMD0_WORD 2 - -#define DSCR_CMD0_SW(x) (((x) & 0x3) << 18) -#define DSCR_CMD0_DW(x) (((x) & 0x3) << 16) - -/* DDMA Descriptor Type. */ -#define DSCR_CMD0_STANDARD 0 -#define DSCR_CMD0_LITERAL 1 -#define DSCR_CMD0_CMP_BRANCH 2 - -#define DSCR_CMD0_DT(x) (((x) & 0x3) << 13) - -/* Status Instruction. */ -#define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */ -#define DSCR_CMD0_ST_CURRENT 1 /* Write current status */ -#define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */ -#define DSCR_CMD0_ST_BYTECNT 3 /* Write remaining byte count */ - -#define DSCR_CMD0_ST(x) (((x) & 0x3) << 0) - -/* Descriptor Command 1. */ -#define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */ -#define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */ -#define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */ -#define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */ - -/* Flag description. */ -#define DSCR_CMD1_FL_MEM_STRIDE0 0 -#define DSCR_CMD1_FL_MEM_STRIDE1 1 -#define DSCR_CMD1_FL_MEM_STRIDE2 2 - -#define DSCR_CMD1_FL(x) (((x) & 0x3) << 22) - -/* Source1, 1-dimensional stride. */ -#define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */ -#define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */ -#define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */ -#define DSCR_SRC1_SB(x) (((x) & 0x3fff) << 14) -#define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */ -#define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0) - -/* Dest1, 1-dimensional stride. */ -#define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */ -#define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */ -#define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */ -#define DSCR_DEST1_DB(x) (((x) & 0x3fff) << 14) -#define DSCR_DEST1_DS_MASK (0x3fff << 0) /* Stride */ -#define DSCR_DEST1_DS(x) (((x) & 0x3fff) << 0) - -#define DSCR_xTS_SIZE1 0 -#define DSCR_xTS_SIZE2 1 -#define DSCR_xTS_SIZE4 2 -#define DSCR_xTS_SIZE8 3 -#define DSCR_SRC1_STS(x) (((x) & 3) << 30) -#define DSCR_DEST1_DTS(x) (((x) & 3) << 30) - -#define DSCR_xAM_INCREMENT 0 -#define DSCR_xAM_DECREMENT 1 -#define DSCR_xAM_STATIC 2 -#define DSCR_xAM_BURST 3 -#define DSCR_SRC1_SAM(x) (((x) & 3) << 28) -#define DSCR_DEST1_DAM(x) (((x) & 3) << 28) - -/* The next descriptor pointer. */ -#define DSCR_NXTPTR_MASK (0x07ffffff) -#define DSCR_NXTPTR(x) ((x) >> 5) -#define DSCR_GET_NXTPTR(x) ((x) << 5) -#define DSCR_NXTPTR_MS (1 << 27) - -/* The number of DBDMA channels. */ -#define NUM_DBDMA_CHANS 16 - -/* - * DDMA API definitions - * FIXME: may not fit to this header file - */ -typedef struct dbdma_device_table { - u32 dev_id; - u32 dev_flags; - u32 dev_tsize; - u32 dev_devwidth; - u32 dev_physaddr; /* If FIFO */ - u32 dev_intlevel; - u32 dev_intpolarity; -} dbdev_tab_t; - - -typedef struct dbdma_chan_config { - spinlock_t lock; - - u32 chan_flags; - u32 chan_index; - dbdev_tab_t *chan_src; - dbdev_tab_t *chan_dest; - au1x_dma_chan_t *chan_ptr; - au1x_ddma_desc_t *chan_desc_base; - au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; - void *chan_callparam; - void (*chan_callback)(int, void *); -} chan_tab_t; - -#define DEV_FLAGS_INUSE (1 << 0) -#define DEV_FLAGS_ANYUSE (1 << 1) -#define DEV_FLAGS_OUT (1 << 2) -#define DEV_FLAGS_IN (1 << 3) -#define DEV_FLAGS_BURSTABLE (1 << 4) -#define DEV_FLAGS_SYNC (1 << 5) -/* end DDMA API definitions */ - -/* - * External functions for drivers to use. - * Use this to allocate a DBDMA channel. The device IDs are one of - * the DSCR_CMD0 devices IDs, which is usually redefined to a more - * meaningful name. The 'callback' is called during DMA completion - * interrupt. - */ -extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, - void (*callback)(int, void *), - void *callparam); - -#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS - -/* Set the device width of an in/out FIFO. */ -u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits); - -/* Allocate a ring of descriptors for DBDMA. */ -u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries); - -/* Put buffers on source/destination descriptors. */ -u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags); -u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags); - -/* Get a buffer from the destination descriptor. */ -u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes); - -void au1xxx_dbdma_stop(u32 chanid); -void au1xxx_dbdma_start(u32 chanid); -void au1xxx_dbdma_reset(u32 chanid); -u32 au1xxx_get_dma_residue(u32 chanid); - -void au1xxx_dbdma_chan_free(u32 chanid); -void au1xxx_dbdma_dump(u32 chanid); - -u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr); - -u32 au1xxx_ddma_add_device(dbdev_tab_t *dev); -extern void au1xxx_ddma_del_device(u32 devid); -void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); - -/* - * Some compatibilty macros -- needed to make changes to API - * without breaking existing drivers. - */ -#define au1xxx_dbdma_put_source(chanid, buf, nbytes) \ - _au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE) -#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) \ - _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags) -#define put_source_flags(chanid, buf, nbytes, flags) \ - au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) - -#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) \ - _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE) -#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) \ - _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags) -#define put_dest_flags(chanid, buf, nbytes, flags) \ - au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) - -/* - * Flags for the put_source/put_dest functions. - */ -#define DDMA_FLAGS_IE (1 << 0) -#define DDMA_FLAGS_NOIE (1 << 1) - -#endif /* _LANGUAGE_ASSEMBLY */ -#endif /* _AU1000_DBDMA_H_ */ diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h deleted file mode 100644 index 60638b8969ba..000000000000 --- a/include/asm-mips/mach-au1x00/au1xxx_ide.h +++ /dev/null @@ -1,194 +0,0 @@ -/* - * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005 - * - * BRIEF MODULE DESCRIPTION - * AMD Alchemy Au1xxx IDE interface routines over the Static Bus - * - * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any later - * version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND - * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE - * Interface and Linux Device Driver" Application Note. - */ - -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -#define DMA_WAIT_TIMEOUT 100 -#define NUM_DESCRIPTORS PRD_ENTRIES -#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */ -#define NUM_DESCRIPTORS 2 -#endif - -#ifndef AU1XXX_ATA_RQSIZE -#define AU1XXX_ATA_RQSIZE 128 -#endif - -/* Disable Burstable-Support for DBDMA */ -#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON -#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0 -#endif - -#ifdef CONFIG_PM -/* - * This will enable the device to be powered up when write() or read() - * is called. If this is not defined, the driver will return -EBUSY. - */ -#define WAKE_ON_ACCESS 1 - -typedef struct { - spinlock_t lock; /* Used to block on state transitions */ - au1xxx_power_dev_t *dev; /* Power Managers device structure */ - unsigned stopped; /* Used to signal device is stopped */ -} pm_state; -#endif - -typedef struct { - u32 tx_dev_id, rx_dev_id, target_dev_id; - u32 tx_chan, rx_chan; - void *tx_desc_head, *rx_desc_head; - ide_hwif_t *hwif; -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - ide_drive_t *drive; - struct dbdma_cmd *dma_table_cpu; - dma_addr_t dma_table_dma; -#endif - int irq; - u32 regbase; -#ifdef CONFIG_PM - pm_state pm; -#endif -} _auide_hwif; - -/******************************************************************************/ -/* PIO Mode timing calculation : */ -/* */ -/* Static Bus Spec ATA Spec */ -/* Tcsoe = t1 */ -/* Toecs = t9 */ -/* Twcs = t9 */ -/* Tcsh = t2i | t2 */ -/* Tcsoff = t2i | t2 */ -/* Twp = t2 */ -/* Tcsw = t1 */ -/* Tpm = 0 */ -/* Ta = t1+t2 */ -/******************************************************************************/ - -#define TCSOE_MASK (0x07 << 29) -#define TOECS_MASK (0x07 << 26) -#define TWCS_MASK (0x07 << 28) -#define TCSH_MASK (0x0F << 24) -#define TCSOFF_MASK (0x07 << 20) -#define TWP_MASK (0x3F << 14) -#define TCSW_MASK (0x0F << 10) -#define TPM_MASK (0x0F << 6) -#define TA_MASK (0x3F << 0) -#define TS_MASK (1 << 8) - -/* Timing parameters PIO mode 0 */ -#define SBC_IDE_PIO0_TCSOE (0x04 << 29) -#define SBC_IDE_PIO0_TOECS (0x01 << 26) -#define SBC_IDE_PIO0_TWCS (0x02 << 28) -#define SBC_IDE_PIO0_TCSH (0x08 << 24) -#define SBC_IDE_PIO0_TCSOFF (0x07 << 20) -#define SBC_IDE_PIO0_TWP (0x10 << 14) -#define SBC_IDE_PIO0_TCSW (0x04 << 10) -#define SBC_IDE_PIO0_TPM (0x00 << 6) -#define SBC_IDE_PIO0_TA (0x15 << 0) -/* Timing parameters PIO mode 1 */ -#define SBC_IDE_PIO1_TCSOE (0x03 << 29) -#define SBC_IDE_PIO1_TOECS (0x01 << 26) -#define SBC_IDE_PIO1_TWCS (0x01 << 28) -#define SBC_IDE_PIO1_TCSH (0x06 << 24) -#define SBC_IDE_PIO1_TCSOFF (0x06 << 20) -#define SBC_IDE_PIO1_TWP (0x08 << 14) -#define SBC_IDE_PIO1_TCSW (0x03 << 10) -#define SBC_IDE_PIO1_TPM (0x00 << 6) -#define SBC_IDE_PIO1_TA (0x0B << 0) -/* Timing parameters PIO mode 2 */ -#define SBC_IDE_PIO2_TCSOE (0x05 << 29) -#define SBC_IDE_PIO2_TOECS (0x01 << 26) -#define SBC_IDE_PIO2_TWCS (0x01 << 28) -#define SBC_IDE_PIO2_TCSH (0x07 << 24) -#define SBC_IDE_PIO2_TCSOFF (0x07 << 20) -#define SBC_IDE_PIO2_TWP (0x1F << 14) -#define SBC_IDE_PIO2_TCSW (0x05 << 10) -#define SBC_IDE_PIO2_TPM (0x00 << 6) -#define SBC_IDE_PIO2_TA (0x22 << 0) -/* Timing parameters PIO mode 3 */ -#define SBC_IDE_PIO3_TCSOE (0x05 << 29) -#define SBC_IDE_PIO3_TOECS (0x01 << 26) -#define SBC_IDE_PIO3_TWCS (0x01 << 28) -#define SBC_IDE_PIO3_TCSH (0x0D << 24) -#define SBC_IDE_PIO3_TCSOFF (0x0D << 20) -#define SBC_IDE_PIO3_TWP (0x15 << 14) -#define SBC_IDE_PIO3_TCSW (0x05 << 10) -#define SBC_IDE_PIO3_TPM (0x00 << 6) -#define SBC_IDE_PIO3_TA (0x1A << 0) -/* Timing parameters PIO mode 4 */ -#define SBC_IDE_PIO4_TCSOE (0x04 << 29) -#define SBC_IDE_PIO4_TOECS (0x01 << 26) -#define SBC_IDE_PIO4_TWCS (0x01 << 28) -#define SBC_IDE_PIO4_TCSH (0x04 << 24) -#define SBC_IDE_PIO4_TCSOFF (0x04 << 20) -#define SBC_IDE_PIO4_TWP (0x0D << 14) -#define SBC_IDE_PIO4_TCSW (0x03 << 10) -#define SBC_IDE_PIO4_TPM (0x00 << 6) -#define SBC_IDE_PIO4_TA (0x12 << 0) -/* Timing parameters MDMA mode 0 */ -#define SBC_IDE_MDMA0_TCSOE (0x03 << 29) -#define SBC_IDE_MDMA0_TOECS (0x01 << 26) -#define SBC_IDE_MDMA0_TWCS (0x01 << 28) -#define SBC_IDE_MDMA0_TCSH (0x07 << 24) -#define SBC_IDE_MDMA0_TCSOFF (0x07 << 20) -#define SBC_IDE_MDMA0_TWP (0x0C << 14) -#define SBC_IDE_MDMA0_TCSW (0x03 << 10) -#define SBC_IDE_MDMA0_TPM (0x00 << 6) -#define SBC_IDE_MDMA0_TA (0x0F << 0) -/* Timing parameters MDMA mode 1 */ -#define SBC_IDE_MDMA1_TCSOE (0x05 << 29) -#define SBC_IDE_MDMA1_TOECS (0x01 << 26) -#define SBC_IDE_MDMA1_TWCS (0x01 << 28) -#define SBC_IDE_MDMA1_TCSH (0x05 << 24) -#define SBC_IDE_MDMA1_TCSOFF (0x05 << 20) -#define SBC_IDE_MDMA1_TWP (0x0F << 14) -#define SBC_IDE_MDMA1_TCSW (0x05 << 10) -#define SBC_IDE_MDMA1_TPM (0x00 << 6) -#define SBC_IDE_MDMA1_TA (0x15 << 0) -/* Timing parameters MDMA mode 2 */ -#define SBC_IDE_MDMA2_TCSOE (0x04 << 29) -#define SBC_IDE_MDMA2_TOECS (0x01 << 26) -#define SBC_IDE_MDMA2_TWCS (0x01 << 28) -#define SBC_IDE_MDMA2_TCSH (0x04 << 24) -#define SBC_IDE_MDMA2_TCSOFF (0x04 << 20) -#define SBC_IDE_MDMA2_TWP (0x0D << 14) -#define SBC_IDE_MDMA2_TCSW (0x04 << 10) -#define SBC_IDE_MDMA2_TPM (0x00 << 6) -#define SBC_IDE_MDMA2_TA (0x12 << 0) - -#define SBC_IDE_TIMING(mode) \ - (SBC_IDE_##mode##_TWCS | \ - SBC_IDE_##mode##_TCSH | \ - SBC_IDE_##mode##_TCSOFF | \ - SBC_IDE_##mode##_TWP | \ - SBC_IDE_##mode##_TCSW | \ - SBC_IDE_##mode##_TPM | \ - SBC_IDE_##mode##_TA) diff --git a/include/asm-mips/mach-au1x00/au1xxx_psc.h b/include/asm-mips/mach-au1x00/au1xxx_psc.h deleted file mode 100644 index 892b7f168eb4..000000000000 --- a/include/asm-mips/mach-au1x00/au1xxx_psc.h +++ /dev/null @@ -1,505 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Include file for Alchemy Semiconductor's Au1k CPU. - * - * Copyright 2004 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* Specifics for the Au1xxx Programmable Serial Controllers, first - * seen in the AU1550 part. - */ -#ifndef _AU1000_PSC_H_ -#define _AU1000_PSC_H_ - -/* The PSC base addresses. */ -#ifdef CONFIG_SOC_AU1550 -#define PSC0_BASE_ADDR 0xb1a00000 -#define PSC1_BASE_ADDR 0xb1b00000 -#define PSC2_BASE_ADDR 0xb0a00000 -#define PSC3_BASE_ADDR 0xb0b00000 -#endif - -#ifdef CONFIG_SOC_AU1200 -#define PSC0_BASE_ADDR 0xb1a00000 -#define PSC1_BASE_ADDR 0xb1b00000 -#endif - -/* - * The PSC select and control registers are common to all protocols. - */ -#define PSC_SEL_OFFSET 0x00000000 -#define PSC_CTRL_OFFSET 0x00000004 - -#define PSC_SEL_CLK_MASK (3 << 4) -#define PSC_SEL_CLK_INTCLK (0 << 4) -#define PSC_SEL_CLK_EXTCLK (1 << 4) -#define PSC_SEL_CLK_SERCLK (2 << 4) - -#define PSC_SEL_PS_MASK 0x00000007 -#define PSC_SEL_PS_DISABLED 0 -#define PSC_SEL_PS_SPIMODE 2 -#define PSC_SEL_PS_I2SMODE 3 -#define PSC_SEL_PS_AC97MODE 4 -#define PSC_SEL_PS_SMBUSMODE 5 - -#define PSC_CTRL_DISABLE 0 -#define PSC_CTRL_SUSPEND 2 -#define PSC_CTRL_ENABLE 3 - -/* AC97 Registers. */ -#define PSC_AC97CFG_OFFSET 0x00000008 -#define PSC_AC97MSK_OFFSET 0x0000000c -#define PSC_AC97PCR_OFFSET 0x00000010 -#define PSC_AC97STAT_OFFSET 0x00000014 -#define PSC_AC97EVNT_OFFSET 0x00000018 -#define PSC_AC97TXRX_OFFSET 0x0000001c -#define PSC_AC97CDC_OFFSET 0x00000020 -#define PSC_AC97RST_OFFSET 0x00000024 -#define PSC_AC97GPO_OFFSET 0x00000028 -#define PSC_AC97GPI_OFFSET 0x0000002c - -#define AC97_PSC_SEL (AC97_PSC_BASE + PSC_SEL_OFFSET) -#define AC97_PSC_CTRL (AC97_PSC_BASE + PSC_CTRL_OFFSET) -#define PSC_AC97CFG (AC97_PSC_BASE + PSC_AC97CFG_OFFSET) -#define PSC_AC97MSK (AC97_PSC_BASE + PSC_AC97MSK_OFFSET) -#define PSC_AC97PCR (AC97_PSC_BASE + PSC_AC97PCR_OFFSET) -#define PSC_AC97STAT (AC97_PSC_BASE + PSC_AC97STAT_OFFSET) -#define PSC_AC97EVNT (AC97_PSC_BASE + PSC_AC97EVNT_OFFSET) -#define PSC_AC97TXRX (AC97_PSC_BASE + PSC_AC97TXRX_OFFSET) -#define PSC_AC97CDC (AC97_PSC_BASE + PSC_AC97CDC_OFFSET) -#define PSC_AC97RST (AC97_PSC_BASE + PSC_AC97RST_OFFSET) -#define PSC_AC97GPO (AC97_PSC_BASE + PSC_AC97GPO_OFFSET) -#define PSC_AC97GPI (AC97_PSC_BASE + PSC_AC97GPI_OFFSET) - -/* AC97 Config Register. */ -#define PSC_AC97CFG_RT_MASK (3 << 30) -#define PSC_AC97CFG_RT_FIFO1 (0 << 30) -#define PSC_AC97CFG_RT_FIFO2 (1 << 30) -#define PSC_AC97CFG_RT_FIFO4 (2 << 30) -#define PSC_AC97CFG_RT_FIFO8 (3 << 30) - -#define PSC_AC97CFG_TT_MASK (3 << 28) -#define PSC_AC97CFG_TT_FIFO1 (0 << 28) -#define PSC_AC97CFG_TT_FIFO2 (1 << 28) -#define PSC_AC97CFG_TT_FIFO4 (2 << 28) -#define PSC_AC97CFG_TT_FIFO8 (3 << 28) - -#define PSC_AC97CFG_DD_DISABLE (1 << 27) -#define PSC_AC97CFG_DE_ENABLE (1 << 26) -#define PSC_AC97CFG_SE_ENABLE (1 << 25) - -#define PSC_AC97CFG_LEN_MASK (0xf << 21) -#define PSC_AC97CFG_TXSLOT_MASK (0x3ff << 11) -#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1) -#define PSC_AC97CFG_GE_ENABLE (1) - -/* Enable slots 3-12. */ -#define PSC_AC97CFG_TXSLOT_ENA(x) (1 << (((x) - 3) + 11)) -#define PSC_AC97CFG_RXSLOT_ENA(x) (1 << (((x) - 3) + 1)) - -/* - * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately. - * The only sensible numbers are 7, 9, or possibly 11. Nah, just do the - * arithmetic in the macro. - */ -#define PSC_AC97CFG_SET_LEN(x) (((((x) - 2) / 2) & 0xf) << 21) -#define PSC_AC97CFG_GET_LEN(x) (((((x) >> 21) & 0xf) * 2) + 2) - -/* AC97 Mask Register. */ -#define PSC_AC97MSK_GR (1 << 25) -#define PSC_AC97MSK_CD (1 << 24) -#define PSC_AC97MSK_RR (1 << 13) -#define PSC_AC97MSK_RO (1 << 12) -#define PSC_AC97MSK_RU (1 << 11) -#define PSC_AC97MSK_TR (1 << 10) -#define PSC_AC97MSK_TO (1 << 9) -#define PSC_AC97MSK_TU (1 << 8) -#define PSC_AC97MSK_RD (1 << 5) -#define PSC_AC97MSK_TD (1 << 4) -#define PSC_AC97MSK_ALLMASK (PSC_AC97MSK_GR | PSC_AC97MSK_CD | \ - PSC_AC97MSK_RR | PSC_AC97MSK_RO | \ - PSC_AC97MSK_RU | PSC_AC97MSK_TR | \ - PSC_AC97MSK_TO | PSC_AC97MSK_TU | \ - PSC_AC97MSK_RD | PSC_AC97MSK_TD) - -/* AC97 Protocol Control Register. */ -#define PSC_AC97PCR_RC (1 << 6) -#define PSC_AC97PCR_RP (1 << 5) -#define PSC_AC97PCR_RS (1 << 4) -#define PSC_AC97PCR_TC (1 << 2) -#define PSC_AC97PCR_TP (1 << 1) -#define PSC_AC97PCR_TS (1 << 0) - -/* AC97 Status register (read only). */ -#define PSC_AC97STAT_CB (1 << 26) -#define PSC_AC97STAT_CP (1 << 25) -#define PSC_AC97STAT_CR (1 << 24) -#define PSC_AC97STAT_RF (1 << 13) -#define PSC_AC97STAT_RE (1 << 12) -#define PSC_AC97STAT_RR (1 << 11) -#define PSC_AC97STAT_TF (1 << 10) -#define PSC_AC97STAT_TE (1 << 9) -#define PSC_AC97STAT_TR (1 << 8) -#define PSC_AC97STAT_RB (1 << 5) -#define PSC_AC97STAT_TB (1 << 4) -#define PSC_AC97STAT_DI (1 << 2) -#define PSC_AC97STAT_DR (1 << 1) -#define PSC_AC97STAT_SR (1 << 0) - -/* AC97 Event Register. */ -#define PSC_AC97EVNT_GR (1 << 25) -#define PSC_AC97EVNT_CD (1 << 24) -#define PSC_AC97EVNT_RR (1 << 13) -#define PSC_AC97EVNT_RO (1 << 12) -#define PSC_AC97EVNT_RU (1 << 11) -#define PSC_AC97EVNT_TR (1 << 10) -#define PSC_AC97EVNT_TO (1 << 9) -#define PSC_AC97EVNT_TU (1 << 8) -#define PSC_AC97EVNT_RD (1 << 5) -#define PSC_AC97EVNT_TD (1 << 4) - -/* CODEC Command Register. */ -#define PSC_AC97CDC_RD (1 << 25) -#define PSC_AC97CDC_ID_MASK (3 << 23) -#define PSC_AC97CDC_INDX_MASK (0x7f << 16) -#define PSC_AC97CDC_ID(x) (((x) & 0x03) << 23) -#define PSC_AC97CDC_INDX(x) (((x) & 0x7f) << 16) - -/* AC97 Reset Control Register. */ -#define PSC_AC97RST_RST (1 << 1) -#define PSC_AC97RST_SNC (1 << 0) - -/* PSC in I2S Mode. */ -typedef struct psc_i2s { - u32 psc_sel; - u32 psc_ctrl; - u32 psc_i2scfg; - u32 psc_i2smsk; - u32 psc_i2spcr; - u32 psc_i2sstat; - u32 psc_i2sevent; - u32 psc_i2stxrx; - u32 psc_i2sudf; -} psc_i2s_t; - -#define PSC_I2SCFG_OFFSET 0x08 -#define PSC_I2SMASK_OFFSET 0x0C -#define PSC_I2SPCR_OFFSET 0x10 -#define PSC_I2SSTAT_OFFSET 0x14 -#define PSC_I2SEVENT_OFFSET 0x18 -#define PSC_I2SRXTX_OFFSET 0x1C -#define PSC_I2SUDF_OFFSET 0x20 - -/* I2S Config Register. */ -#define PSC_I2SCFG_RT_MASK (3 << 30) -#define PSC_I2SCFG_RT_FIFO1 (0 << 30) -#define PSC_I2SCFG_RT_FIFO2 (1 << 30) -#define PSC_I2SCFG_RT_FIFO4 (2 << 30) -#define PSC_I2SCFG_RT_FIFO8 (3 << 30) - -#define PSC_I2SCFG_TT_MASK (3 << 28) -#define PSC_I2SCFG_TT_FIFO1 (0 << 28) -#define PSC_I2SCFG_TT_FIFO2 (1 << 28) -#define PSC_I2SCFG_TT_FIFO4 (2 << 28) -#define PSC_I2SCFG_TT_FIFO8 (3 << 28) - -#define PSC_I2SCFG_DD_DISABLE (1 << 27) -#define PSC_I2SCFG_DE_ENABLE (1 << 26) -#define PSC_I2SCFG_SET_WS(x) (((((x) / 2) - 1) & 0x7f) << 16) -#define PSC_I2SCFG_WS(n) ((n & 0xFF) << 16) -#define PSC_I2SCFG_WS_MASK (PSC_I2SCFG_WS(0x3F)) -#define PSC_I2SCFG_WI (1 << 15) - -#define PSC_I2SCFG_DIV_MASK (3 << 13) -#define PSC_I2SCFG_DIV2 (0 << 13) -#define PSC_I2SCFG_DIV4 (1 << 13) -#define PSC_I2SCFG_DIV8 (2 << 13) -#define PSC_I2SCFG_DIV16 (3 << 13) - -#define PSC_I2SCFG_BI (1 << 12) -#define PSC_I2SCFG_BUF (1 << 11) -#define PSC_I2SCFG_MLJ (1 << 10) -#define PSC_I2SCFG_XM (1 << 9) - -/* The word length equation is simply LEN+1. */ -#define PSC_I2SCFG_SET_LEN(x) ((((x) - 1) & 0x1f) << 4) -#define PSC_I2SCFG_GET_LEN(x) ((((x) >> 4) & 0x1f) + 1) - -#define PSC_I2SCFG_LB (1 << 2) -#define PSC_I2SCFG_MLF (1 << 1) -#define PSC_I2SCFG_MS (1 << 0) - -/* I2S Mask Register. */ -#define PSC_I2SMSK_RR (1 << 13) -#define PSC_I2SMSK_RO (1 << 12) -#define PSC_I2SMSK_RU (1 << 11) -#define PSC_I2SMSK_TR (1 << 10) -#define PSC_I2SMSK_TO (1 << 9) -#define PSC_I2SMSK_TU (1 << 8) -#define PSC_I2SMSK_RD (1 << 5) -#define PSC_I2SMSK_TD (1 << 4) -#define PSC_I2SMSK_ALLMASK (PSC_I2SMSK_RR | PSC_I2SMSK_RO | \ - PSC_I2SMSK_RU | PSC_I2SMSK_TR | \ - PSC_I2SMSK_TO | PSC_I2SMSK_TU | \ - PSC_I2SMSK_RD | PSC_I2SMSK_TD) - -/* I2S Protocol Control Register. */ -#define PSC_I2SPCR_RC (1 << 6) -#define PSC_I2SPCR_RP (1 << 5) -#define PSC_I2SPCR_RS (1 << 4) -#define PSC_I2SPCR_TC (1 << 2) -#define PSC_I2SPCR_TP (1 << 1) -#define PSC_I2SPCR_TS (1 << 0) - -/* I2S Status register (read only). */ -#define PSC_I2SSTAT_RF (1 << 13) -#define PSC_I2SSTAT_RE (1 << 12) -#define PSC_I2SSTAT_RR (1 << 11) -#define PSC_I2SSTAT_TF (1 << 10) -#define PSC_I2SSTAT_TE (1 << 9) -#define PSC_I2SSTAT_TR (1 << 8) -#define PSC_I2SSTAT_RB (1 << 5) -#define PSC_I2SSTAT_TB (1 << 4) -#define PSC_I2SSTAT_DI (1 << 2) -#define PSC_I2SSTAT_DR (1 << 1) -#define PSC_I2SSTAT_SR (1 << 0) - -/* I2S Event Register. */ -#define PSC_I2SEVNT_RR (1 << 13) -#define PSC_I2SEVNT_RO (1 << 12) -#define PSC_I2SEVNT_RU (1 << 11) -#define PSC_I2SEVNT_TR (1 << 10) -#define PSC_I2SEVNT_TO (1 << 9) -#define PSC_I2SEVNT_TU (1 << 8) -#define PSC_I2SEVNT_RD (1 << 5) -#define PSC_I2SEVNT_TD (1 << 4) - -/* PSC in SPI Mode. */ -typedef struct psc_spi { - u32 psc_sel; - u32 psc_ctrl; - u32 psc_spicfg; - u32 psc_spimsk; - u32 psc_spipcr; - u32 psc_spistat; - u32 psc_spievent; - u32 psc_spitxrx; -} psc_spi_t; - -/* SPI Config Register. */ -#define PSC_SPICFG_RT_MASK (3 << 30) -#define PSC_SPICFG_RT_FIFO1 (0 << 30) -#define PSC_SPICFG_RT_FIFO2 (1 << 30) -#define PSC_SPICFG_RT_FIFO4 (2 << 30) -#define PSC_SPICFG_RT_FIFO8 (3 << 30) - -#define PSC_SPICFG_TT_MASK (3 << 28) -#define PSC_SPICFG_TT_FIFO1 (0 << 28) -#define PSC_SPICFG_TT_FIFO2 (1 << 28) -#define PSC_SPICFG_TT_FIFO4 (2 << 28) -#define PSC_SPICFG_TT_FIFO8 (3 << 28) - -#define PSC_SPICFG_DD_DISABLE (1 << 27) -#define PSC_SPICFG_DE_ENABLE (1 << 26) -#define PSC_SPICFG_CLR_BAUD(x) ((x) & ~((0x3f) << 15)) -#define PSC_SPICFG_SET_BAUD(x) (((x) & 0x3f) << 15) - -#define PSC_SPICFG_SET_DIV(x) (((x) & 0x03) << 13) -#define PSC_SPICFG_DIV2 0 -#define PSC_SPICFG_DIV4 1 -#define PSC_SPICFG_DIV8 2 -#define PSC_SPICFG_DIV16 3 - -#define PSC_SPICFG_BI (1 << 12) -#define PSC_SPICFG_PSE (1 << 11) -#define PSC_SPICFG_CGE (1 << 10) -#define PSC_SPICFG_CDE (1 << 9) - -#define PSC_SPICFG_CLR_LEN(x) ((x) & ~((0x1f) << 4)) -#define PSC_SPICFG_SET_LEN(x) (((x-1) & 0x1f) << 4) - -#define PSC_SPICFG_LB (1 << 3) -#define PSC_SPICFG_MLF (1 << 1) -#define PSC_SPICFG_MO (1 << 0) - -/* SPI Mask Register. */ -#define PSC_SPIMSK_MM (1 << 16) -#define PSC_SPIMSK_RR (1 << 13) -#define PSC_SPIMSK_RO (1 << 12) -#define PSC_SPIMSK_RU (1 << 11) -#define PSC_SPIMSK_TR (1 << 10) -#define PSC_SPIMSK_TO (1 << 9) -#define PSC_SPIMSK_TU (1 << 8) -#define PSC_SPIMSK_SD (1 << 5) -#define PSC_SPIMSK_MD (1 << 4) -#define PSC_SPIMSK_ALLMASK (PSC_SPIMSK_MM | PSC_SPIMSK_RR | \ - PSC_SPIMSK_RO | PSC_SPIMSK_TO | \ - PSC_SPIMSK_TU | PSC_SPIMSK_SD | \ - PSC_SPIMSK_MD) - -/* SPI Protocol Control Register. */ -#define PSC_SPIPCR_RC (1 << 6) -#define PSC_SPIPCR_SP (1 << 5) -#define PSC_SPIPCR_SS (1 << 4) -#define PSC_SPIPCR_TC (1 << 2) -#define PSC_SPIPCR_MS (1 << 0) - -/* SPI Status register (read only). */ -#define PSC_SPISTAT_RF (1 << 13) -#define PSC_SPISTAT_RE (1 << 12) -#define PSC_SPISTAT_RR (1 << 11) -#define PSC_SPISTAT_TF (1 << 10) -#define PSC_SPISTAT_TE (1 << 9) -#define PSC_SPISTAT_TR (1 << 8) -#define PSC_SPISTAT_SB (1 << 5) -#define PSC_SPISTAT_MB (1 << 4) -#define PSC_SPISTAT_DI (1 << 2) -#define PSC_SPISTAT_DR (1 << 1) -#define PSC_SPISTAT_SR (1 << 0) - -/* SPI Event Register. */ -#define PSC_SPIEVNT_MM (1 << 16) -#define PSC_SPIEVNT_RR (1 << 13) -#define PSC_SPIEVNT_RO (1 << 12) -#define PSC_SPIEVNT_RU (1 << 11) -#define PSC_SPIEVNT_TR (1 << 10) -#define PSC_SPIEVNT_TO (1 << 9) -#define PSC_SPIEVNT_TU (1 << 8) -#define PSC_SPIEVNT_SD (1 << 5) -#define PSC_SPIEVNT_MD (1 << 4) - -/* Transmit register control. */ -#define PSC_SPITXRX_LC (1 << 29) -#define PSC_SPITXRX_SR (1 << 28) - -/* PSC in SMBus (I2C) Mode. */ -typedef struct psc_smb { - u32 psc_sel; - u32 psc_ctrl; - u32 psc_smbcfg; - u32 psc_smbmsk; - u32 psc_smbpcr; - u32 psc_smbstat; - u32 psc_smbevnt; - u32 psc_smbtxrx; - u32 psc_smbtmr; -} psc_smb_t; - -/* SMBus Config Register. */ -#define PSC_SMBCFG_RT_MASK (3 << 30) -#define PSC_SMBCFG_RT_FIFO1 (0 << 30) -#define PSC_SMBCFG_RT_FIFO2 (1 << 30) -#define PSC_SMBCFG_RT_FIFO4 (2 << 30) -#define PSC_SMBCFG_RT_FIFO8 (3 << 30) - -#define PSC_SMBCFG_TT_MASK (3 << 28) -#define PSC_SMBCFG_TT_FIFO1 (0 << 28) -#define PSC_SMBCFG_TT_FIFO2 (1 << 28) -#define PSC_SMBCFG_TT_FIFO4 (2 << 28) -#define PSC_SMBCFG_TT_FIFO8 (3 << 28) - -#define PSC_SMBCFG_DD_DISABLE (1 << 27) -#define PSC_SMBCFG_DE_ENABLE (1 << 26) - -#define PSC_SMBCFG_SET_DIV(x) (((x) & 0x03) << 13) -#define PSC_SMBCFG_DIV2 0 -#define PSC_SMBCFG_DIV4 1 -#define PSC_SMBCFG_DIV8 2 -#define PSC_SMBCFG_DIV16 3 - -#define PSC_SMBCFG_GCE (1 << 9) -#define PSC_SMBCFG_SFM (1 << 8) - -#define PSC_SMBCFG_SET_SLV(x) (((x) & 0x7f) << 1) - -/* SMBus Mask Register. */ -#define PSC_SMBMSK_DN (1 << 30) -#define PSC_SMBMSK_AN (1 << 29) -#define PSC_SMBMSK_AL (1 << 28) -#define PSC_SMBMSK_RR (1 << 13) -#define PSC_SMBMSK_RO (1 << 12) -#define PSC_SMBMSK_RU (1 << 11) -#define PSC_SMBMSK_TR (1 << 10) -#define PSC_SMBMSK_TO (1 << 9) -#define PSC_SMBMSK_TU (1 << 8) -#define PSC_SMBMSK_SD (1 << 5) -#define PSC_SMBMSK_MD (1 << 4) -#define PSC_SMBMSK_ALLMASK (PSC_SMBMSK_DN | PSC_SMBMSK_AN | \ - PSC_SMBMSK_AL | PSC_SMBMSK_RR | \ - PSC_SMBMSK_RO | PSC_SMBMSK_TO | \ - PSC_SMBMSK_TU | PSC_SMBMSK_SD | \ - PSC_SMBMSK_MD) - -/* SMBus Protocol Control Register. */ -#define PSC_SMBPCR_DC (1 << 2) -#define PSC_SMBPCR_MS (1 << 0) - -/* SMBus Status register (read only). */ -#define PSC_SMBSTAT_BB (1 << 28) -#define PSC_SMBSTAT_RF (1 << 13) -#define PSC_SMBSTAT_RE (1 << 12) -#define PSC_SMBSTAT_RR (1 << 11) -#define PSC_SMBSTAT_TF (1 << 10) -#define PSC_SMBSTAT_TE (1 << 9) -#define PSC_SMBSTAT_TR (1 << 8) -#define PSC_SMBSTAT_SB (1 << 5) -#define PSC_SMBSTAT_MB (1 << 4) -#define PSC_SMBSTAT_DI (1 << 2) -#define PSC_SMBSTAT_DR (1 << 1) -#define PSC_SMBSTAT_SR (1 << 0) - -/* SMBus Event Register. */ -#define PSC_SMBEVNT_DN (1 << 30) -#define PSC_SMBEVNT_AN (1 << 29) -#define PSC_SMBEVNT_AL (1 << 28) -#define PSC_SMBEVNT_RR (1 << 13) -#define PSC_SMBEVNT_RO (1 << 12) -#define PSC_SMBEVNT_RU (1 << 11) -#define PSC_SMBEVNT_TR (1 << 10) -#define PSC_SMBEVNT_TO (1 << 9) -#define PSC_SMBEVNT_TU (1 << 8) -#define PSC_SMBEVNT_SD (1 << 5) -#define PSC_SMBEVNT_MD (1 << 4) -#define PSC_SMBEVNT_ALLCLR (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | \ - PSC_SMBEVNT_AL | PSC_SMBEVNT_RR | \ - PSC_SMBEVNT_RO | PSC_SMBEVNT_TO | \ - PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \ - PSC_SMBEVNT_MD) - -/* Transmit register control. */ -#define PSC_SMBTXRX_RSR (1 << 28) -#define PSC_SMBTXRX_STP (1 << 29) -#define PSC_SMBTXRX_DATAMASK 0xff - -/* SMBus protocol timers register. */ -#define PSC_SMBTMR_SET_TH(x) (((x) & 0x03) << 30) -#define PSC_SMBTMR_SET_PS(x) (((x) & 0x1f) << 25) -#define PSC_SMBTMR_SET_PU(x) (((x) & 0x1f) << 20) -#define PSC_SMBTMR_SET_SH(x) (((x) & 0x1f) << 15) -#define PSC_SMBTMR_SET_SU(x) (((x) & 0x1f) << 10) -#define PSC_SMBTMR_SET_CL(x) (((x) & 0x1f) << 5) -#define PSC_SMBTMR_SET_CH(x) (((x) & 0x1f) << 0) - -#endif /* _AU1000_PSC_H_ */ diff --git a/include/asm-mips/mach-au1x00/gpio.h b/include/asm-mips/mach-au1x00/gpio.h deleted file mode 100644 index 2dc61e009a08..000000000000 --- a/include/asm-mips/mach-au1x00/gpio.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef _AU1XXX_GPIO_H_ -#define _AU1XXX_GPIO_H_ - -#include - -#define AU1XXX_GPIO_BASE 200 - -struct au1x00_gpio2 { - u32 dir; - u32 reserved; - u32 output; - u32 pinstate; - u32 inten; - u32 enable; -}; - -extern int au1xxx_gpio_get_value(unsigned gpio); -extern void au1xxx_gpio_set_value(unsigned gpio, int value); -extern int au1xxx_gpio_direction_input(unsigned gpio); -extern int au1xxx_gpio_direction_output(unsigned gpio, int value); - - -/* Wrappers for the arch-neutral GPIO API */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - /* Not yet implemented */ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ - /* Not yet implemented */ -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return au1xxx_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return au1xxx_gpio_direction_output(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return au1xxx_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - au1xxx_gpio_set_value(gpio, value); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return gpio; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq; -} - -/* For cansleep */ -#include - -#endif /* _AU1XXX_GPIO_H_ */ diff --git a/include/asm-mips/mach-au1x00/ioremap.h b/include/asm-mips/mach-au1x00/ioremap.h deleted file mode 100644 index 364cea2dc71f..000000000000 --- a/include/asm-mips/mach-au1x00/ioremap.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-mips/mach-au1x00/ioremap.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_MACH_AU1X00_IOREMAP_H -#define __ASM_MACH_AU1X00_IOREMAP_H - -#include - -#ifdef CONFIG_64BIT_PHYS_ADDR -extern phys_t __fixup_bigphys_addr(phys_t, phys_t); -#else -static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) -{ - return phys_addr; -} -#endif - -/* - * Allow physical addresses to be fixed up to help 36-bit peripherals. - */ -static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) -{ - return __fixup_bigphys_addr(phys_addr, size); -} - -static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, - unsigned long flags) -{ - return NULL; -} - -static inline int plat_iounmap(const volatile void __iomem *addr) -{ - return 0; -} - -#endif /* __ASM_MACH_AU1X00_IOREMAP_H */ diff --git a/include/asm-mips/mach-au1x00/prom.h b/include/asm-mips/mach-au1x00/prom.h deleted file mode 100644 index e38715577c51..000000000000 --- a/include/asm-mips/mach-au1x00/prom.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __AU1X00_PROM_H -#define __AU1X00_PROM_H - -extern int prom_argc; -extern char **prom_argv; -extern char **prom_envp; - -extern void prom_init_cmdline(void); -extern char *prom_getcmdline(void); -extern char *prom_getenv(char *envname); -extern int prom_get_ethernet_addr(char *ethernet_addr); - -#endif diff --git a/include/asm-mips/mach-au1x00/war.h b/include/asm-mips/mach-au1x00/war.h deleted file mode 100644 index dd57d03d68ba..000000000000 --- a/include/asm-mips/mach-au1x00/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_AU1X00_WAR_H -#define __ASM_MIPS_MACH_AU1X00_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_AU1X00_WAR_H */ diff --git a/include/asm-mips/mach-bcm47xx/bcm47xx.h b/include/asm-mips/mach-bcm47xx/bcm47xx.h deleted file mode 100644 index d008f47a28bd..000000000000 --- a/include/asm-mips/mach-bcm47xx/bcm47xx.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 2007 Aurelien Jarno - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __ASM_BCM47XX_H -#define __ASM_BCM47XX_H - -/* SSB bus */ -extern struct ssb_bus ssb_bcm47xx; - -#endif /* __ASM_BCM47XX_H */ diff --git a/include/asm-mips/mach-bcm47xx/gpio.h b/include/asm-mips/mach-bcm47xx/gpio.h deleted file mode 100644 index cfc8f4d618ce..000000000000 --- a/include/asm-mips/mach-bcm47xx/gpio.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 Aurelien Jarno - */ - -#ifndef __BCM47XX_GPIO_H -#define __BCM47XX_GPIO_H - -#define BCM47XX_EXTIF_GPIO_LINES 5 -#define BCM47XX_CHIPCO_GPIO_LINES 16 - -extern int bcm47xx_gpio_to_irq(unsigned gpio); -extern int bcm47xx_gpio_get_value(unsigned gpio); -extern void bcm47xx_gpio_set_value(unsigned gpio, int value); -extern int bcm47xx_gpio_direction_input(unsigned gpio); -extern int bcm47xx_gpio_direction_output(unsigned gpio, int value); - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return bcm47xx_gpio_to_irq(gpio); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return bcm47xx_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - bcm47xx_gpio_set_value(gpio, value); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return bcm47xx_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return bcm47xx_gpio_direction_output(gpio, value); -} - - -/* cansleep wrappers */ -#include - -#endif /* __BCM47XX_GPIO_H */ diff --git a/include/asm-mips/mach-bcm47xx/war.h b/include/asm-mips/mach-bcm47xx/war.h deleted file mode 100644 index 4a2b7986b582..000000000000 --- a/include/asm-mips/mach-bcm47xx/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_BCM947XX_WAR_H -#define __ASM_MIPS_MACH_BCM947XX_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_BCM947XX_WAR_H */ diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h deleted file mode 100644 index 5b9fce73f11d..000000000000 --- a/include/asm-mips/mach-cobalt/cobalt.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * The Cobalt board ID information. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1997 Cobalt Microserver - * Copyright (C) 1997, 2003 Ralf Baechle - * Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv) - */ -#ifndef __ASM_COBALT_H -#define __ASM_COBALT_H - -extern int cobalt_board_id; - -#define COBALT_BRD_ID_QUBE1 0x3 -#define COBALT_BRD_ID_RAQ1 0x4 -#define COBALT_BRD_ID_QUBE2 0x5 -#define COBALT_BRD_ID_RAQ2 0x6 - -#endif /* __ASM_COBALT_H */ diff --git a/include/asm-mips/mach-cobalt/cpu-feature-overrides.h b/include/asm-mips/mach-cobalt/cpu-feature-overrides.h deleted file mode 100644 index b3314cf53194..000000000000 --- a/include/asm-mips/mach-cobalt/cpu-feature-overrides.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006, 07 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_COBALT_CPU_FEATURE_OVERRIDES_H -#define __ASM_COBALT_CPU_FEATURE_OVERRIDES_H - - -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_3k_cache 0 -#define cpu_has_4k_cache 1 -#define cpu_has_tx39_cache 0 -#define cpu_has_fpu 1 -#define cpu_has_32fpr 1 -#define cpu_has_counter 1 -#define cpu_has_watch 0 -#define cpu_has_divec 1 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 0 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_inclusive_pcaches 0 -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 -#define cpu_scache_line_size() 0 - -#ifdef CONFIG_64BIT -#define cpu_has_llsc 0 -#else -#define cpu_has_llsc 1 -#endif - -#define cpu_has_mips16 0 -#define cpu_has_mdmx 0 -#define cpu_has_mips3d 0 -#define cpu_has_smartmips 0 -#define cpu_has_vtag_icache 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_icache_snoops_remote_store 0 -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_COBALT_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-cobalt/irq.h b/include/asm-mips/mach-cobalt/irq.h deleted file mode 100644 index 57c8c9ac5851..000000000000 --- a/include/asm-mips/mach-cobalt/irq.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Cobalt IRQ definitions. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1997 Cobalt Microserver - * Copyright (C) 1997, 2003 Ralf Baechle - * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv) - * Copyright (C) 2007 Yoichi Yuasa - */ -#ifndef _ASM_COBALT_IRQ_H -#define _ASM_COBALT_IRQ_H - -/* - * i8259 interrupts used on Cobalt: - * - * 8 - RTC - * 9 - PCI slot - * 14 - IDE0 - * 15 - IDE1(no connector on board) - */ -#define I8259A_IRQ_BASE 0 - -#define PCISLOT_IRQ (I8259A_IRQ_BASE + 9) - -/* - * CPU interrupts used on Cobalt: - * - * 0 - Software interrupt 0 (unused) - * 1 - Software interrupt 0 (unused) - * 2 - cascade GT64111 - * 3 - ethernet or SCSI host controller - * 4 - ethernet - * 5 - 16550 UART - * 6 - cascade i8259 - * 7 - CP0 counter - */ -#define MIPS_CPU_IRQ_BASE 16 - -#define GT641XX_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 2) -#define RAQ2_SCSI_IRQ (MIPS_CPU_IRQ_BASE + 3) -#define ETH0_IRQ (MIPS_CPU_IRQ_BASE + 3) -#define QUBE1_ETH0_IRQ (MIPS_CPU_IRQ_BASE + 4) -#define ETH1_IRQ (MIPS_CPU_IRQ_BASE + 4) -#define SERIAL_IRQ (MIPS_CPU_IRQ_BASE + 5) -#define SCSI_IRQ (MIPS_CPU_IRQ_BASE + 5) -#define I8259_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 6) - -#define GT641XX_IRQ_BASE 24 - -#include - -#define NR_IRQS (GT641XX_PCI_INT3_IRQ + 1) - -#endif /* _ASM_COBALT_IRQ_H */ diff --git a/include/asm-mips/mach-cobalt/mach-gt64120.h b/include/asm-mips/mach-cobalt/mach-gt64120.h deleted file mode 100644 index ae9c5523c7ef..000000000000 --- a/include/asm-mips/mach-cobalt/mach-gt64120.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2006 Yoichi Yuasa - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - */ -#ifndef _COBALT_MACH_GT64120_H -#define _COBALT_MACH_GT64120_H - -/* - * Cobalt uses GT64111. GT64111 is almost the same as GT64120. - */ - -#define GT64120_BASE CKSEG1ADDR(GT_DEF_BASE) - -#endif /* _COBALT_MACH_GT64120_H */ diff --git a/include/asm-mips/mach-cobalt/war.h b/include/asm-mips/mach-cobalt/war.h deleted file mode 100644 index 97884fd18ac0..000000000000 --- a/include/asm-mips/mach-cobalt/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_COBALT_WAR_H -#define __ASM_MIPS_MACH_COBALT_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_COBALT_WAR_H */ diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h deleted file mode 100644 index 27f26102b1bb..000000000000 --- a/include/asm-mips/mach-db1x00/db1200.h +++ /dev/null @@ -1,230 +0,0 @@ -/* - * AMD Alchemy DBAu1200 Reference Board - * Board register defines. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_DB1200_H -#define __ASM_DB1200_H - -#include -#include - -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX - -/* - * SPI and SMB are muxed on the DBAu1200 board. - * Refer to board documentation. - */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR -/* - * AC'97 and I2S are muxed on the DBAu1200 board. - * Refer to board documentation. - */ -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define I2S_PSC_BASE PSC1_BASE_ADDR - -#define BCSR_KSEG1_ADDR 0xB9800000 - -typedef volatile struct -{ - /*00*/ u16 whoami; - u16 reserved0; - /*04*/ u16 status; - u16 reserved1; - /*08*/ u16 switches; - u16 reserved2; - /*0C*/ u16 resets; - u16 reserved3; - - /*10*/ u16 pcmcia; - u16 reserved4; - /*14*/ u16 board; - u16 reserved5; - /*18*/ u16 disk_leds; - u16 reserved6; - /*1C*/ u16 system; - u16 reserved7; - - /*20*/ u16 intclr; - u16 reserved8; - /*24*/ u16 intset; - u16 reserved9; - /*28*/ u16 intclr_mask; - u16 reserved10; - /*2C*/ u16 intset_mask; - u16 reserved11; - - /*30*/ u16 sig_status; - u16 reserved12; - /*34*/ u16 int_status; - u16 reserved13; - /*38*/ u16 reserved14; - u16 reserved15; - /*3C*/ u16 reserved16; - u16 reserved17; - -} BCSR; - -static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; - -/* - * Register bit definitions for the BCSRs - */ -#define BCSR_WHOAMI_DCID 0x000F -#define BCSR_WHOAMI_CPLD 0x00F0 -#define BCSR_WHOAMI_BOARD 0x0F00 - -#define BCSR_STATUS_PCMCIA0VS 0x0003 -#define BCSR_STATUS_PCMCIA1VS 0x000C -#define BCSR_STATUS_SWAPBOOT 0x0040 -#define BCSR_STATUS_FLASHBUSY 0x0100 -#define BCSR_STATUS_IDECBLID 0x0200 -#define BCSR_STATUS_SD0WP 0x0400 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 - -#define BCSR_SWITCHES_OCTAL 0x00FF -#define BCSR_SWITCHES_DIP_1 0x0080 -#define BCSR_SWITCHES_DIP_2 0x0040 -#define BCSR_SWITCHES_DIP_3 0x0020 -#define BCSR_SWITCHES_DIP_4 0x0010 -#define BCSR_SWITCHES_DIP_5 0x0008 -#define BCSR_SWITCHES_DIP_6 0x0004 -#define BCSR_SWITCHES_DIP_7 0x0002 -#define BCSR_SWITCHES_DIP_8 0x0001 -#define BCSR_SWITCHES_ROTARY 0x0F00 - -#define BCSR_RESETS_ETH 0x0001 -#define BCSR_RESETS_CAMERA 0x0002 -#define BCSR_RESETS_DC 0x0004 -#define BCSR_RESETS_IDE 0x0008 -#define BCSR_RESETS_TV 0x0010 -/* Not resets but in the same register */ -#define BCSR_RESETS_PWMR1MUX 0x0800 -#define BCSR_RESETS_PCS0MUX 0x1000 -#define BCSR_RESETS_PCS1MUX 0x2000 -#define BCSR_RESETS_SPISEL 0x4000 - -#define BCSR_PCMCIA_PC0VPP 0x0003 -#define BCSR_PCMCIA_PC0VCC 0x000C -#define BCSR_PCMCIA_PC0DRVEN 0x0010 -#define BCSR_PCMCIA_PC0RST 0x0080 -#define BCSR_PCMCIA_PC1VPP 0x0300 -#define BCSR_PCMCIA_PC1VCC 0x0C00 -#define BCSR_PCMCIA_PC1DRVEN 0x1000 -#define BCSR_PCMCIA_PC1RST 0x8000 - -#define BCSR_BOARD_LCDVEE 0x0001 -#define BCSR_BOARD_LCDVDD 0x0002 -#define BCSR_BOARD_LCDBL 0x0004 -#define BCSR_BOARD_CAMSNAP 0x0010 -#define BCSR_BOARD_CAMPWR 0x0020 -#define BCSR_BOARD_SD0PWR 0x0040 - -#define BCSR_LEDS_DECIMALS 0x0003 -#define BCSR_LEDS_LED0 0x0100 -#define BCSR_LEDS_LED1 0x0200 -#define BCSR_LEDS_LED2 0x0400 -#define BCSR_LEDS_LED3 0x0800 - -#define BCSR_SYSTEM_POWEROFF 0x4000 -#define BCSR_SYSTEM_RESET 0x8000 - -/* Bit positions for the different interrupt sources */ -#define BCSR_INT_IDE 0x0001 -#define BCSR_INT_ETH 0x0002 -#define BCSR_INT_PC0 0x0004 -#define BCSR_INT_PC0STSCHG 0x0008 -#define BCSR_INT_PC1 0x0010 -#define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 -#define BCSR_INT_FLASHBUSY 0x0080 -#define BCSR_INT_PC0INSERT 0x0100 -#define BCSR_INT_PC0EJECT 0x0200 -#define BCSR_INT_PC1INSERT 0x0400 -#define BCSR_INT_PC1EJECT 0x0800 -#define BCSR_INT_SD0INSERT 0x1000 -#define BCSR_INT_SD0EJECT 0x2000 - -#define SMC91C111_PHYS_ADDR 0x19000300 -#define SMC91C111_INT DB1200_ETH_INT - -#define IDE_PHYS_ADDR 0x18800000 -#define IDE_REG_SHIFT 5 -#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) -#define IDE_INT DB1200_IDE_INT -#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 -#define IDE_RQSIZE 128 - -#define NAND_PHYS_ADDR 0x20000000 - -/* - * External Interrupts for DBAu1200 as of 8/6/2004. - * Bit positions in the CPLD registers can be calculated by taking - * the interrupt define and subtracting the DB1200_INT_BEGIN value. - * - * Example: IDE bis pos is = 64 - 64 - * ETH bit pos is = 65 - 64 - */ -enum external_pb1200_ints { - DB1200_INT_BEGIN = AU1000_MAX_INTR + 1, - - DB1200_IDE_INT = DB1200_INT_BEGIN, - DB1200_ETH_INT, - DB1200_PC0_INT, - DB1200_PC0_STSCHG_INT, - DB1200_PC1_INT, - DB1200_PC1_STSCHG_INT, - DB1200_DC_INT, - DB1200_FLASHBUSY_INT, - DB1200_PC0_INSERT_INT, - DB1200_PC0_EJECT_INT, - DB1200_PC1_INSERT_INT, - DB1200_PC1_EJECT_INT, - DB1200_SD0_INSERT_INT, - DB1200_SD0_EJECT_INT, - - DB1200_INT_END = DB1200_INT_BEGIN + 15, -}; - - -/* - * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c - */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT) \ - ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) - -#define BOARD_PC0_INT DB1200_PC0_INT -#define BOARD_PC1_INT DB1200_PC1_INT -#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) - -/* NAND chip select */ -#define NAND_CS 1 - -#endif /* __ASM_DB1200_H */ diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h deleted file mode 100644 index 1a515b8c870f..000000000000 --- a/include/asm-mips/mach-db1x00/db1x00.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * AMD Alchemy DBAu1x00 Reference Boards - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_DB1X00_H -#define __ASM_DB1X00_H - -#include - -#ifdef CONFIG_MIPS_DB1550 - -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX - -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define SMBUS_PSC_BASE PSC2_BASE_ADDR -#define I2S_PSC_BASE PSC3_BASE_ADDR - -#define BCSR_KSEG1_ADDR 0xAF000000 -#define NAND_PHYS_ADDR 0x20000000 - -#else -#define BCSR_KSEG1_ADDR 0xAE000000 -#endif - -/* - * Overlay data structure of the DBAu1x00 board registers. - * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx. - */ -typedef volatile struct -{ - /*00*/ unsigned short whoami; - unsigned short reserved0; - /*04*/ unsigned short status; - unsigned short reserved1; - /*08*/ unsigned short switches; - unsigned short reserved2; - /*0C*/ unsigned short resets; - unsigned short reserved3; - /*10*/ unsigned short pcmcia; - unsigned short reserved4; - /*14*/ unsigned short specific; - unsigned short reserved5; - /*18*/ unsigned short leds; - unsigned short reserved6; - /*1C*/ unsigned short swreset; - unsigned short reserved7; - -} BCSR; - - -/* - * Register/mask bit definitions for the BCSRs - */ -#define BCSR_WHOAMI_DCID 0x000F -#define BCSR_WHOAMI_CPLD 0x00F0 -#define BCSR_WHOAMI_BOARD 0x0F00 - -#define BCSR_STATUS_PC0VS 0x0003 -#define BCSR_STATUS_PC1VS 0x000C -#define BCSR_STATUS_PC0FI 0x0010 -#define BCSR_STATUS_PC1FI 0x0020 -#define BCSR_STATUS_FLASHBUSY 0x0100 -#define BCSR_STATUS_ROMBUSY 0x0400 -#define BCSR_STATUS_SWAPBOOT 0x2000 -#define BCSR_STATUS_FLASHDEN 0xC000 - -#define BCSR_SWITCHES_DIP 0x00FF -#define BCSR_SWITCHES_DIP_1 0x0080 -#define BCSR_SWITCHES_DIP_2 0x0040 -#define BCSR_SWITCHES_DIP_3 0x0020 -#define BCSR_SWITCHES_DIP_4 0x0010 -#define BCSR_SWITCHES_DIP_5 0x0008 -#define BCSR_SWITCHES_DIP_6 0x0004 -#define BCSR_SWITCHES_DIP_7 0x0002 -#define BCSR_SWITCHES_DIP_8 0x0001 -#define BCSR_SWITCHES_ROTARY 0x0F00 - -#define BCSR_RESETS_PHY0 0x0001 -#define BCSR_RESETS_PHY1 0x0002 -#define BCSR_RESETS_DC 0x0004 -#define BCSR_RESETS_FIR_SEL 0x2000 -#define BCSR_RESETS_IRDA_MODE_MASK 0xC000 -#define BCSR_RESETS_IRDA_MODE_FULL 0x0000 -#define BCSR_RESETS_IRDA_MODE_OFF 0x4000 -#define BCSR_RESETS_IRDA_MODE_2_3 0x8000 -#define BCSR_RESETS_IRDA_MODE_1_3 0xC000 - -#define BCSR_PCMCIA_PC0VPP 0x0003 -#define BCSR_PCMCIA_PC0VCC 0x000C -#define BCSR_PCMCIA_PC0DRVEN 0x0010 -#define BCSR_PCMCIA_PC0RST 0x0080 -#define BCSR_PCMCIA_PC1VPP 0x0300 -#define BCSR_PCMCIA_PC1VCC 0x0C00 -#define BCSR_PCMCIA_PC1DRVEN 0x1000 -#define BCSR_PCMCIA_PC1RST 0x8000 - -#define BCSR_BOARD_PCIM66EN 0x0001 -#define BCSR_BOARD_SD0_PWR 0x0040 -#define BCSR_BOARD_SD1_PWR 0x0080 -#define BCSR_BOARD_PCIM33 0x0100 -#define BCSR_BOARD_GPIO200RST 0x0400 -#define BCSR_BOARD_PCICFG 0x1000 -#define BCSR_BOARD_SD0_WP 0x4000 -#define BCSR_BOARD_SD1_WP 0x8000 - -#define BCSR_LEDS_DECIMALS 0x0003 -#define BCSR_LEDS_LED0 0x0100 -#define BCSR_LEDS_LED1 0x0200 -#define BCSR_LEDS_LED2 0x0400 -#define BCSR_LEDS_LED3 0x0800 - -#define BCSR_SWRESET_RESET 0x0080 - -/* PCMCIA DBAu1x00 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) - -/* - * NAND defines - * - * Timing values as described in databook, * ns value stripped of the - * lower 2 bits. - * These defines are here rather than an Au1550 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) -#define NAND_CS 1 - -/* Should be done by YAMON */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ - -#endif /* __ASM_DB1X00_H */ diff --git a/include/asm-mips/mach-dec/mc146818rtc.h b/include/asm-mips/mach-dec/mc146818rtc.h deleted file mode 100644 index 6724e99e43e1..000000000000 --- a/include/asm-mips/mach-dec/mc146818rtc.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * RTC definitions for DECstation style attached Dallas DS1287 chip. - * - * Copyright (C) 1998, 2001 by Ralf Baechle - * Copyright (C) 1998 by Harald Koerfgen - * Copyright (C) 2002, 2005 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_MIPS_DEC_RTC_DEC_H -#define __ASM_MIPS_DEC_RTC_DEC_H - -#include -#include -#include - -extern volatile u8 *dec_rtc_base; - -#define ARCH_RTC_LOCATION - -#define RTC_PORT(x) CPHYSADDR((long)dec_rtc_base) -#define RTC_IO_EXTENT dec_kn_slot_size -#define RTC_IOMAPPED 0 -#undef RTC_IRQ - -#define RTC_DEC_YEAR 0x3f /* Where we store the real year on DECs. */ - -static inline unsigned char CMOS_READ(unsigned long addr) -{ - return dec_rtc_base[addr * 4]; -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long addr) -{ - dec_rtc_base[addr * 4] = data; -} - -#define RTC_ALWAYS_BCD 0 - -#endif /* __ASM_MIPS_DEC_RTC_DEC_H */ diff --git a/include/asm-mips/mach-dec/war.h b/include/asm-mips/mach-dec/war.h deleted file mode 100644 index ca5e2ef909ad..000000000000 --- a/include/asm-mips/mach-dec/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_DEC_WAR_H -#define __ASM_MIPS_MACH_DEC_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_DEC_WAR_H */ diff --git a/include/asm-mips/mach-emma2rh/irq.h b/include/asm-mips/mach-emma2rh/irq.h deleted file mode 100644 index 5439eb856461..000000000000 --- a/include/asm-mips/mach-emma2rh/irq.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 by Ralf Baechle - */ -#ifndef __ASM_MACH_EMMA2RH_IRQ_H -#define __ASM_MACH_EMMA2RH_IRQ_H - -#define NR_IRQS 256 - -#include_next - -#endif /* __ASM_MACH_EMMA2RH_IRQ_H */ diff --git a/include/asm-mips/mach-emma2rh/war.h b/include/asm-mips/mach-emma2rh/war.h deleted file mode 100644 index b660a4c30e6a..000000000000 --- a/include/asm-mips/mach-emma2rh/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_EMMA2RH_WAR_H -#define __ASM_MIPS_MACH_EMMA2RH_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_EMMA2RH_WAR_H */ diff --git a/include/asm-mips/mach-excite/cpu-feature-overrides.h b/include/asm-mips/mach-excite/cpu-feature-overrides.h deleted file mode 100644 index 107104c3cd12..000000000000 --- a/include/asm-mips/mach-excite/cpu-feature-overrides.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 Thomas Koeller - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H - -/* - * Basler eXcite has an RM9122 processor. - */ -#define cpu_has_watch 1 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_icache_snoops_remote_store 0 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_inclusive_pcaches 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 -#define cpu_scache_line_size() 32 - -#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-excite/excite.h b/include/asm-mips/mach-excite/excite.h deleted file mode 100644 index 4c29ba44992c..000000000000 --- a/include/asm-mips/mach-excite/excite.h +++ /dev/null @@ -1,154 +0,0 @@ -#ifndef __EXCITE_H__ -#define __EXCITE_H__ - -#include -#include -#include - -#define EXCITE_CPU_EXT_CLOCK 100000000 - -#if !defined(__ASSEMBLY__) -void __init excite_kgdb_init(void); -void excite_procfs_init(void); -extern unsigned long memsize; -extern char modetty[]; -extern u32 unit_id; -#endif - -/* Base name for XICAP devices */ -#define XICAP_NAME "xicap_gpi" - -/* OCD register offsets */ -#define LKB0 0x0038 -#define LKB5 0x0128 -#define LKM5 0x012C -#define LKB7 0x0138 -#define LKM7 0x013c -#define LKB8 0x0140 -#define LKM8 0x0144 -#define LKB9 0x0148 -#define LKM9 0x014c -#define LKB10 0x0150 -#define LKM10 0x0154 -#define LKB11 0x0158 -#define LKM11 0x015c -#define LKB12 0x0160 -#define LKM12 0x0164 -#define LKB13 0x0168 -#define LKM13 0x016c -#define LDP0 0x0200 -#define LDP1 0x0210 -#define LDP2 0x0220 -#define LDP3 0x0230 -#define INTPIN0 0x0A40 -#define INTPIN1 0x0A44 -#define INTPIN2 0x0A48 -#define INTPIN3 0x0A4C -#define INTPIN4 0x0A50 -#define INTPIN5 0x0A54 -#define INTPIN6 0x0A58 -#define INTPIN7 0x0A5C - - - - -/* TITAN register offsets */ -#define CPRR 0x0004 -#define CPDSR 0x0008 -#define CPTC0R 0x000c -#define CPTC1R 0x0010 -#define CPCFG0 0x0020 -#define CPCFG1 0x0024 -#define CPDST0A 0x0028 -#define CPDST0B 0x002c -#define CPDST1A 0x0030 -#define CPDST1B 0x0034 -#define CPXDSTA 0x0038 -#define CPXDSTB 0x003c -#define CPXCISRA 0x0048 -#define CPXCISRB 0x004c -#define CPGIG0ER 0x0050 -#define CPGIG1ER 0x0054 -#define CPGRWL 0x0068 -#define CPURSLMT 0x00f8 -#define UACFG 0x0200 -#define UAINTS 0x0204 -#define SDRXFCIE 0x4828 -#define SDTXFCIE 0x4928 -#define INTP0Status0 0x1B00 -#define INTP0Mask0 0x1B04 -#define INTP0Set0 0x1B08 -#define INTP0Clear0 0x1B0C -#define GXCFG 0x5000 -#define GXDMADRPFX 0x5018 -#define GXDMA_DESCADR 0x501c -#define GXCH0TDESSTRT 0x5054 - -/* IRQ definitions */ -#define NMICONFIG 0xac0 -#define TITAN_MSGINT 0xc4 -#define TITAN_IRQ ((TITAN_MSGINT / 0x20) + 2) -#define FPGA0_MSGINT 0x5a -#define FPGA0_IRQ ((FPGA0_MSGINT / 0x20) + 2) -#define FPGA1_MSGINT 0x7b -#define FPGA1_IRQ ((FPGA1_MSGINT / 0x20) + 2) -#define PHY_MSGINT 0x9c -#define PHY_IRQ ((PHY_MSGINT / 0x20) + 2) - -#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE) -/* Pre-release units used interrupt pin #9 */ -#define USB_IRQ 11 -#else -/* Re-designed units use interrupt pin #1 */ -#define USB_MSGINT 0x39 -#define USB_IRQ ((USB_MSGINT / 0x20) + 2) -#endif -#define TIMER_IRQ 12 - - -/* Device address ranges */ -#define EXCITE_OFFS_OCD 0x1fffc000 -#define EXCITE_SIZE_OCD (16 * 1024) -#define EXCITE_PHYS_OCD CPHYSADDR(EXCITE_OFFS_OCD) -#define EXCITE_ADDR_OCD CKSEG1ADDR(EXCITE_OFFS_OCD) - -#define EXCITE_OFFS_SCRAM 0x1fffa000 -#define EXCITE_SIZE_SCRAM (8 << 10) -#define EXCITE_PHYS_SCRAM CPHYSADDR(EXCITE_OFFS_SCRAM) -#define EXCITE_ADDR_SCRAM CKSEG1ADDR(EXCITE_OFFS_SCRAM) - -#define EXCITE_OFFS_PCI_IO 0x1fff8000 -#define EXCITE_SIZE_PCI_IO (8 << 10) -#define EXCITE_PHYS_PCI_IO CPHYSADDR(EXCITE_OFFS_PCI_IO) -#define EXCITE_ADDR_PCI_IO CKSEG1ADDR(EXCITE_OFFS_PCI_IO) - -#define EXCITE_OFFS_TITAN 0x1fff0000 -#define EXCITE_SIZE_TITAN (32 << 10) -#define EXCITE_PHYS_TITAN CPHYSADDR(EXCITE_OFFS_TITAN) -#define EXCITE_ADDR_TITAN CKSEG1ADDR(EXCITE_OFFS_TITAN) - -#define EXCITE_OFFS_PCI_MEM 0x1ffe0000 -#define EXCITE_SIZE_PCI_MEM (64 << 10) -#define EXCITE_PHYS_PCI_MEM CPHYSADDR(EXCITE_OFFS_PCI_MEM) -#define EXCITE_ADDR_PCI_MEM CKSEG1ADDR(EXCITE_OFFS_PCI_MEM) - -#define EXCITE_OFFS_FPGA 0x1ffdc000 -#define EXCITE_SIZE_FPGA (16 << 10) -#define EXCITE_PHYS_FPGA CPHYSADDR(EXCITE_OFFS_FPGA) -#define EXCITE_ADDR_FPGA CKSEG1ADDR(EXCITE_OFFS_FPGA) - -#define EXCITE_OFFS_NAND 0x1ffd8000 -#define EXCITE_SIZE_NAND (16 << 10) -#define EXCITE_PHYS_NAND CPHYSADDR(EXCITE_OFFS_NAND) -#define EXCITE_ADDR_NAND CKSEG1ADDR(EXCITE_OFFS_NAND) - -#define EXCITE_OFFS_BOOTROM 0x1f000000 -#define EXCITE_SIZE_BOOTROM (8 << 20) -#define EXCITE_PHYS_BOOTROM CPHYSADDR(EXCITE_OFFS_BOOTROM) -#define EXCITE_ADDR_BOOTROM CKSEG1ADDR(EXCITE_OFFS_BOOTROM) - -/* FPGA address offsets */ -#define EXCITE_FPGA_DPR 0x0104 /* dual-ported ram */ -#define EXCITE_FPGA_SYSCTL 0x0200 /* system control register block */ - -#endif /* __EXCITE_H__ */ diff --git a/include/asm-mips/mach-excite/excite_fpga.h b/include/asm-mips/mach-excite/excite_fpga.h deleted file mode 100644 index 0a1ef69bece7..000000000000 --- a/include/asm-mips/mach-excite/excite_fpga.h +++ /dev/null @@ -1,80 +0,0 @@ -#ifndef EXCITE_FPGA_H_INCLUDED -#define EXCITE_FPGA_H_INCLUDED - - -/** - * Address alignment of the individual FPGA bytes. - * The address arrangement of the individual bytes of the FPGA is two - * byte aligned at the embedded MK2 platform. - */ -#ifdef EXCITE_CCI_FPGA_MK2 -typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2))); -#else -typedef unsigned char excite_cci_fpga_align_t; -#endif - - -/** - * Size of Dual Ported RAM. - */ -#define EXCITE_DPR_SIZE 263 - - -/** - * Size of Reserved Status Fields in Dual Ported RAM. - */ -#define EXCITE_DPR_STATUS_SIZE 7 - - - -/** - * FPGA. - * Hardware register layout of the FPGA interface. The FPGA must accessed - * byte wise solely. - * @see EXCITE_CCI_DPR_MK2 - */ -typedef struct excite_fpga { - - /** - * Dual Ported RAM. - */ - excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE]; - - /** - * Status. - */ - excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE]; - -#ifdef EXCITE_CCI_FPGA_MK2 - /** - * RM9000 Interrupt. - * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite. - */ - excite_cci_fpga_align_t rm9k_int; -#else - /** - * MK2 Interrupt. - * Write access initiates interrupt at the ARM processor of the MK2. - */ - excite_cci_fpga_align_t mk2_int; - - excite_cci_fpga_align_t gap[0x1000-0x10f]; - - /** - * IRQ Source/Acknowledge. - */ - excite_cci_fpga_align_t rm9k_irq_src; - - /** - * IRQ Mask. - * Set bits enable the related interrupt. - */ - excite_cci_fpga_align_t rm9k_irq_mask; -#endif - - -} excite_fpga; - - - -#endif /* ndef EXCITE_FPGA_H_INCLUDED */ diff --git a/include/asm-mips/mach-excite/excite_nandflash.h b/include/asm-mips/mach-excite/excite_nandflash.h deleted file mode 100644 index c4cf6140622e..000000000000 --- a/include/asm-mips/mach-excite/excite_nandflash.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __EXCITE_NANDFLASH_H__ -#define __EXCITE_NANDFLASH_H__ - -/* Resource names */ -#define EXCITE_NANDFLASH_RESOURCE_REGS "excite_nandflash_regs" - -#endif /* __EXCITE_NANDFLASH_H__ */ diff --git a/include/asm-mips/mach-excite/rm9k_eth.h b/include/asm-mips/mach-excite/rm9k_eth.h deleted file mode 100644 index 94705a46f72e..000000000000 --- a/include/asm-mips/mach-excite/rm9k_eth.h +++ /dev/null @@ -1,23 +0,0 @@ -#if !defined(__RM9K_ETH_H__) -#define __RM9K_ETH_H__ - -#define RM9K_GE_NAME "rm9k_ge" - -/* Resource names */ -#define RM9K_GE_RESOURCE_MAC "rm9k_ge_mac" -#define RM9K_GE_RESOURCE_MSTAT "rm9k_ge_mstat" -#define RM9K_GE_RESOURCE_PKTPROC "rm9k_ge_pktproc" -#define RM9K_GE_RESOURCE_XDMA "rm9k_ge_xdma" -#define RM9K_GE_RESOURCE_FIFO_RX "rm9k_ge_fifo_rx" -#define RM9K_GE_RESOURCE_FIFO_TX "rm9k_ge_fifo_tx" -#define RM9K_GE_RESOURCE_FIFOMEM_RX "rm9k_ge_fifo_memory_rx" -#define RM9K_GE_RESOURCE_FIFOMEM_TX "rm9k_ge_fifo_memory_tx" -#define RM9K_GE_RESOURCE_PHY "rm9k_ge_phy" -#define RM9K_GE_RESOURCE_DMADESC_RX "rm9k_ge_dmadesc_rx" -#define RM9K_GE_RESOURCE_DMADESC_TX "rm9k_ge_dmadesc_tx" -#define RM9K_GE_RESOURCE_IRQ_MAIN "rm9k_ge_irq_main" -#define RM9K_GE_RESOURCE_IRQ_PHY "rm9k_ge_irq_phy" -#define RM9K_GE_RESOURCE_GPI_SLICE "rm9k_ge_gpi_slice" -#define RM9K_GE_RESOURCE_MDIO_CHANNEL "rm9k_ge_mdio_channel" - -#endif /* !defined(__RM9K_ETH_H__) */ diff --git a/include/asm-mips/mach-excite/rm9k_wdt.h b/include/asm-mips/mach-excite/rm9k_wdt.h deleted file mode 100644 index 3fa3c08d2da7..000000000000 --- a/include/asm-mips/mach-excite/rm9k_wdt.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __RM9K_WDT_H__ -#define __RM9K_WDT_H__ - -/* Device name */ -#define WDT_NAME "wdt_gpi" - -/* Resource names */ -#define WDT_RESOURCE_REGS "excite_watchdog_regs" -#define WDT_RESOURCE_IRQ "excite_watchdog_irq" -#define WDT_RESOURCE_COUNTER "excite_watchdog_counter" - -#endif /* __RM9K_WDT_H__ */ diff --git a/include/asm-mips/mach-excite/rm9k_xicap.h b/include/asm-mips/mach-excite/rm9k_xicap.h deleted file mode 100644 index 009577734a8d..000000000000 --- a/include/asm-mips/mach-excite/rm9k_xicap.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __EXCITE_XICAP_H__ -#define __EXCITE_XICAP_H__ - - -/* Resource names */ -#define XICAP_RESOURCE_FIFO_RX "xicap_fifo_rx" -#define XICAP_RESOURCE_FIFO_TX "xicap_fifo_tx" -#define XICAP_RESOURCE_XDMA "xicap_xdma" -#define XICAP_RESOURCE_DMADESC "xicap_dmadesc" -#define XICAP_RESOURCE_PKTPROC "xicap_pktproc" -#define XICAP_RESOURCE_IRQ "xicap_irq" -#define XICAP_RESOURCE_GPI_SLICE "xicap_gpi_slice" -#define XICAP_RESOURCE_FIFO_BLK "xicap_fifo_blocks" -#define XICAP_RESOURCE_PKT_STREAM "xicap_pkt_stream" - -#endif /* __EXCITE_XICAP_H__ */ diff --git a/include/asm-mips/mach-excite/war.h b/include/asm-mips/mach-excite/war.h deleted file mode 100644 index 1f82180c1598..000000000000 --- a/include/asm-mips/mach-excite/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H -#define __ASM_MIPS_MACH_EXCITE_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 1 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */ diff --git a/include/asm-mips/mach-generic/cpu-feature-overrides.h b/include/asm-mips/mach-generic/cpu-feature-overrides.h deleted file mode 100644 index 7c185bb06f13..000000000000 --- a/include/asm-mips/mach-generic/cpu-feature-overrides.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Ralf Baechle - */ -#ifndef __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H - -/* Intentionally empty file ... */ - -#endif /* __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-generic/dma-coherence.h b/include/asm-mips/mach-generic/dma-coherence.h deleted file mode 100644 index 76e04e7feb84..000000000000 --- a/include/asm-mips/mach-generic/dma-coherence.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 Ralf Baechle - * - */ -#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H -#define __ASM_MACH_GENERIC_DMA_COHERENCE_H - -struct device; - -static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, - size_t size) -{ - return virt_to_phys(addr); -} - -static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, - struct page *page) -{ - return page_to_phys(page); -} - -static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) -{ - return dma_addr; -} - -static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) -{ -} - -static inline int plat_device_is_coherent(struct device *dev) -{ -#ifdef CONFIG_DMA_COHERENT - return 1; -#endif -#ifdef CONFIG_DMA_NONCOHERENT - return 0; -#endif -} - -#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-generic/floppy.h b/include/asm-mips/mach-generic/floppy.h deleted file mode 100644 index 001a8ce17c17..000000000000 --- a/include/asm-mips/mach-generic/floppy.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 1997, 1998, 2003 by Ralf Baechle - */ -#ifndef __ASM_MACH_GENERIC_FLOPPY_H -#define __ASM_MACH_GENERIC_FLOPPY_H - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -/* - * How to access the FDC's registers. - */ -static inline unsigned char fd_inb(unsigned int port) -{ - return inb_p(port); -} - -static inline void fd_outb(unsigned char value, unsigned int port) -{ - outb_p(value, port); -} - -/* - * How to access the floppy DMA functions. - */ -static inline void fd_enable_dma(void) -{ - enable_dma(FLOPPY_DMA); -} - -static inline void fd_disable_dma(void) -{ - disable_dma(FLOPPY_DMA); -} - -static inline int fd_request_dma(void) -{ - return request_dma(FLOPPY_DMA, "floppy"); -} - -static inline void fd_free_dma(void) -{ - free_dma(FLOPPY_DMA); -} - -static inline void fd_clear_dma_ff(void) -{ - clear_dma_ff(FLOPPY_DMA); -} - -static inline void fd_set_dma_mode(char mode) -{ - set_dma_mode(FLOPPY_DMA, mode); -} - -static inline void fd_set_dma_addr(char *addr) -{ - set_dma_addr(FLOPPY_DMA, (unsigned long) addr); -} - -static inline void fd_set_dma_count(unsigned int count) -{ - set_dma_count(FLOPPY_DMA, count); -} - -static inline int fd_get_dma_residue(void) -{ - return get_dma_residue(FLOPPY_DMA); -} - -static inline void fd_enable_irq(void) -{ - enable_irq(FLOPPY_IRQ); -} - -static inline void fd_disable_irq(void) -{ - disable_irq(FLOPPY_IRQ); -} - -static inline int fd_request_irq(void) -{ - return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); -} - -static inline void fd_free_irq(void) -{ - free_irq(FLOPPY_IRQ, NULL); -} - -#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); - - -static inline unsigned long fd_getfdaddr1(void) -{ - return 0x3f0; -} - -static inline unsigned long fd_dma_mem_alloc(unsigned long size) -{ - unsigned long mem; - - mem = __get_dma_pages(GFP_KERNEL, get_order(size)); - - return mem; -} - -static inline void fd_dma_mem_free(unsigned long addr, unsigned long size) -{ - free_pages(addr, get_order(size)); -} - -static inline unsigned long fd_drive_type(unsigned long n) -{ - if (n == 0) - return 4; /* 3,5", 1.44mb */ - - return 0; -} - -#endif /* __ASM_MACH_GENERIC_FLOPPY_H */ diff --git a/include/asm-mips/mach-generic/gpio.h b/include/asm-mips/mach-generic/gpio.h deleted file mode 100644 index b4e70208da64..000000000000 --- a/include/asm-mips/mach-generic/gpio.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_MACH_GENERIC_GPIO_H -#define __ASM_MACH_GENERIC_GPIO_H - -#ifdef CONFIG_GPIOLIB -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#else -int gpio_request(unsigned gpio, const char *label); -void gpio_free(unsigned gpio); -int gpio_direction_input(unsigned gpio); -int gpio_direction_output(unsigned gpio, int value); -int gpio_get_value(unsigned gpio); -void gpio_set_value(unsigned gpio, int value); -#endif -int gpio_to_irq(unsigned gpio); -int irq_to_gpio(unsigned irq); - -#include /* cansleep wrappers */ - -#endif /* __ASM_MACH_GENERIC_GPIO_H */ diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h deleted file mode 100644 index 73008f7bdc93..000000000000 --- a/include/asm-mips/mach-generic/ide.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994-1996 Linus Torvalds & authors - * - * Copied from i386; many of the especially older MIPS or ISA-based platforms - * are basically identical. Using this file probably implies i8259 PIC - * support in a system but the very least interrupt numbers 0 - 15 need to - * be put aside for legacy devices. - */ -#ifndef __ASM_MACH_GENERIC_IDE_H -#define __ASM_MACH_GENERIC_IDE_H - -#ifdef __KERNEL__ - -#include -#include -#include - -static __inline__ int ide_probe_legacy(void) -{ -#ifdef CONFIG_PCI - struct pci_dev *dev; - /* - * This can be called on the ide_setup() path, super-early in - * boot. But the down_read() will enable local interrupts, - * which can cause some machines to crash. So here we detect - * and flag that situation and bail out early. - */ - if (no_pci_devices()) - return 0; - dev = pci_get_class(PCI_CLASS_BRIDGE_EISA << 8, NULL); - if (dev) - goto found; - dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL); - if (dev) - goto found; - return 0; -found: - pci_dev_put(dev); - return 1; -#elif defined(CONFIG_EISA) || defined(CONFIG_ISA) - return 1; -#else - return 0; -#endif -} - -/* MIPS port and memory-mapped I/O string operations. */ -static inline void __ide_flush_prologue(void) -{ -#ifdef CONFIG_SMP - if (cpu_has_dc_aliases) - preempt_disable(); -#endif -} - -static inline void __ide_flush_epilogue(void) -{ -#ifdef CONFIG_SMP - if (cpu_has_dc_aliases) - preempt_enable(); -#endif -} - -static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size) -{ - if (cpu_has_dc_aliases) { - unsigned long end = addr + size; - - while (addr < end) { - local_flush_data_cache_page((void *)addr); - addr += PAGE_SIZE; - } - } -} - -/* - * insw() and gang might be called with interrupts disabled, so we can't - * send IPIs for flushing due to the potencial of deadlocks, see the comment - * above smp_call_function() in arch/mips/kernel/smp.c. We work around the - * problem by disabling preemption so we know we actually perform the flush - * on the processor that actually has the lines to be flushed which hopefully - * is even better for performance anyway. - */ -static inline void __ide_insw(unsigned long port, void *addr, - unsigned int count) -{ - __ide_flush_prologue(); - insw(port, addr, count); - __ide_flush_dcache_range((unsigned long)addr, count * 2); - __ide_flush_epilogue(); -} - -static inline void __ide_insl(unsigned long port, void *addr, unsigned int count) -{ - __ide_flush_prologue(); - insl(port, addr, count); - __ide_flush_dcache_range((unsigned long)addr, count * 4); - __ide_flush_epilogue(); -} - -static inline void __ide_outsw(unsigned long port, const void *addr, - unsigned long count) -{ - __ide_flush_prologue(); - outsw(port, addr, count); - __ide_flush_dcache_range((unsigned long)addr, count * 2); - __ide_flush_epilogue(); -} - -static inline void __ide_outsl(unsigned long port, const void *addr, - unsigned long count) -{ - __ide_flush_prologue(); - outsl(port, addr, count); - __ide_flush_dcache_range((unsigned long)addr, count * 4); - __ide_flush_epilogue(); -} - -static inline void __ide_mm_insw(void __iomem *port, void *addr, u32 count) -{ - __ide_flush_prologue(); - readsw(port, addr, count); - __ide_flush_dcache_range((unsigned long)addr, count * 2); - __ide_flush_epilogue(); -} - -static inline void __ide_mm_insl(void __iomem *port, void *addr, u32 count) -{ - __ide_flush_prologue(); - readsl(port, addr, count); - __ide_flush_dcache_range((unsigned long)addr, count * 4); - __ide_flush_epilogue(); -} - -static inline void __ide_mm_outsw(void __iomem *port, void *addr, u32 count) -{ - __ide_flush_prologue(); - writesw(port, addr, count); - __ide_flush_dcache_range((unsigned long)addr, count * 2); - __ide_flush_epilogue(); -} - -static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count) -{ - __ide_flush_prologue(); - writesl(port, addr, count); - __ide_flush_dcache_range((unsigned long)addr, count * 4); - __ide_flush_epilogue(); -} - -/* ide_insw calls insw, not __ide_insw. Why? */ -#undef insw -#undef insl -#undef outsw -#undef outsl -#define insw(port, addr, count) __ide_insw(port, addr, count) -#define insl(port, addr, count) __ide_insl(port, addr, count) -#define outsw(port, addr, count) __ide_outsw(port, addr, count) -#define outsl(port, addr, count) __ide_outsl(port, addr, count) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_MACH_GENERIC_IDE_H */ diff --git a/include/asm-mips/mach-generic/ioremap.h b/include/asm-mips/mach-generic/ioremap.h deleted file mode 100644 index b379938d47f0..000000000000 --- a/include/asm-mips/mach-generic/ioremap.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * include/asm-mips/mach-generic/ioremap.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_MACH_GENERIC_IOREMAP_H -#define __ASM_MACH_GENERIC_IOREMAP_H - -#include - -/* - * Allow physical addresses to be fixed up to help peripherals located - * outside the low 32-bit range -- generic pass-through version. - */ -static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) -{ - return phys_addr; -} - -static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, - unsigned long flags) -{ - return NULL; -} - -static inline int plat_iounmap(const volatile void __iomem *addr) -{ - return 0; -} - -#endif /* __ASM_MACH_GENERIC_IOREMAP_H */ diff --git a/include/asm-mips/mach-generic/irq.h b/include/asm-mips/mach-generic/irq.h deleted file mode 100644 index 70d9a25132c5..000000000000 --- a/include/asm-mips/mach-generic/irq.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 by Ralf Baechle - */ -#ifndef __ASM_MACH_GENERIC_IRQ_H -#define __ASM_MACH_GENERIC_IRQ_H - -#ifndef NR_IRQS -#define NR_IRQS 128 -#endif - -#ifdef CONFIG_I8259 -#ifndef I8259A_IRQ_BASE -#define I8259A_IRQ_BASE 0 -#endif -#endif - -#ifdef CONFIG_IRQ_CPU - -#ifndef MIPS_CPU_IRQ_BASE -#ifdef CONFIG_I8259 -#define MIPS_CPU_IRQ_BASE 16 -#else -#define MIPS_CPU_IRQ_BASE 0 -#endif /* CONFIG_I8259 */ -#endif - -#ifdef CONFIG_IRQ_CPU_RM7K -#ifndef RM7K_CPU_IRQ_BASE -#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8) -#endif -#endif - -#ifdef CONFIG_IRQ_CPU_RM9K -#ifndef RM9K_CPU_IRQ_BASE -#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12) -#endif -#endif - -#endif /* CONFIG_IRQ_CPU */ - -#endif /* __ASM_MACH_GENERIC_IRQ_H */ diff --git a/include/asm-mips/mach-generic/kernel-entry-init.h b/include/asm-mips/mach-generic/kernel-entry-init.h deleted file mode 100644 index 7e66505fa574..000000000000 --- a/include/asm-mips/mach-generic/kernel-entry-init.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Embedded Alley Solutions, Inc - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_GENERIC_KERNEL_ENTRY_H -#define __ASM_MACH_GENERIC_KERNEL_ENTRY_H - -/* Intentionally empty macro, used in head.S. Override in - * arch/mips/mach-xxx/kernel-entry-init.h when necessary. - */ -.macro kernel_entry_setup -.endm - -/* - * Do SMP slave processor setup necessary before we can savely execute C code. - */ - .macro smp_slave_setup - .endm - - -#endif /* __ASM_MACH_GENERIC_KERNEL_ENTRY_H */ diff --git a/include/asm-mips/mach-generic/kmalloc.h b/include/asm-mips/mach-generic/kmalloc.h deleted file mode 100644 index b8e6deba352f..000000000000 --- a/include/asm-mips/mach-generic/kmalloc.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_MACH_GENERIC_KMALLOC_H -#define __ASM_MACH_GENERIC_KMALLOC_H - - -#ifndef CONFIG_DMA_COHERENT -/* - * Total overkill for most systems but need as a safe default. - * Set this one if any device in the system might do non-coherent DMA. - */ -#define ARCH_KMALLOC_MINALIGN 128 -#endif - -#endif /* __ASM_MACH_GENERIC_KMALLOC_H */ diff --git a/include/asm-mips/mach-generic/mangle-port.h b/include/asm-mips/mach-generic/mangle-port.h deleted file mode 100644 index f49dc990214b..000000000000 --- a/include/asm-mips/mach-generic/mangle-port.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2004 Ralf Baechle - */ -#ifndef __ASM_MACH_GENERIC_MANGLE_PORT_H -#define __ASM_MACH_GENERIC_MANGLE_PORT_H - -#define __swizzle_addr_b(port) (port) -#define __swizzle_addr_w(port) (port) -#define __swizzle_addr_l(port) (port) -#define __swizzle_addr_q(port) (port) - -/* - * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware; - * less sane hardware forces software to fiddle with this... - * - * Regardless, if the host bus endianness mismatches that of PCI/ISA, then - * you can't have the numerical value of data and byte addresses within - * multibyte quantities both preserved at the same time. Hence two - * variations of functions: non-prefixed ones that preserve the value - * and prefixed ones that preserve byte addresses. The latters are - * typically used for moving raw data between a peripheral and memory (cf. - * string I/O functions), hence the "__mem_" prefix. - */ -#if defined(CONFIG_SWAP_IO_SPACE) - -# define ioswabb(a, x) (x) -# define __mem_ioswabb(a, x) (x) -# define ioswabw(a, x) le16_to_cpu(x) -# define __mem_ioswabw(a, x) (x) -# define ioswabl(a, x) le32_to_cpu(x) -# define __mem_ioswabl(a, x) (x) -# define ioswabq(a, x) le64_to_cpu(x) -# define __mem_ioswabq(a, x) (x) - -#else - -# define ioswabb(a, x) (x) -# define __mem_ioswabb(a, x) (x) -# define ioswabw(a, x) (x) -# define __mem_ioswabw(a, x) cpu_to_le16(x) -# define ioswabl(a, x) (x) -# define __mem_ioswabl(a, x) cpu_to_le32(x) -# define ioswabq(a, x) (x) -# define __mem_ioswabq(a, x) cpu_to_le32(x) - -#endif - -#endif /* __ASM_MACH_GENERIC_MANGLE_PORT_H */ diff --git a/include/asm-mips/mach-generic/mc146818rtc.h b/include/asm-mips/mach-generic/mc146818rtc.h deleted file mode 100644 index 0b9a942f079d..000000000000 --- a/include/asm-mips/mach-generic/mc146818rtc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2001, 03 by Ralf Baechle - * - * RTC routines for PC style attached Dallas chip. - */ -#ifndef __ASM_MACH_GENERIC_MC146818RTC_H -#define __ASM_MACH_GENERIC_MC146818RTC_H - -#include - -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_IRQ 8 - -static inline unsigned char CMOS_READ(unsigned long addr) -{ - outb_p(addr, RTC_PORT(0)); - return inb_p(RTC_PORT(1)); -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long addr) -{ - outb_p(addr, RTC_PORT(0)); - outb_p(data, RTC_PORT(1)); -} - -#define RTC_ALWAYS_BCD 1 - -#ifndef mc146818_decode_year -#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) -#endif - -#endif /* __ASM_MACH_GENERIC_MC146818RTC_H */ diff --git a/include/asm-mips/mach-generic/spaces.h b/include/asm-mips/mach-generic/spaces.h deleted file mode 100644 index c9fa4b14968d..000000000000 --- a/include/asm-mips/mach-generic/spaces.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle - * Copyright (C) 2000, 2002 Maciej W. Rozycki - * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_MACH_GENERIC_SPACES_H -#define _ASM_MACH_GENERIC_SPACES_H - -#include - -/* - * This gives the physical RAM offset. - */ -#ifndef PHYS_OFFSET -#define PHYS_OFFSET _AC(0, UL) -#endif - -#ifdef CONFIG_32BIT - -#define CAC_BASE _AC(0x80000000, UL) -#define IO_BASE _AC(0xa0000000, UL) -#define UNCAC_BASE _AC(0xa0000000, UL) - -#ifndef MAP_BASE -#define MAP_BASE _AC(0xc0000000, UL) -#endif - -/* - * Memory above this physical address will be considered highmem. - */ -#ifndef HIGHMEM_START -#define HIGHMEM_START _AC(0x20000000, UL) -#endif - -#endif /* CONFIG_32BIT */ - -#ifdef CONFIG_64BIT - -#ifndef CAC_BASE -#ifdef CONFIG_DMA_NONCOHERENT -#define CAC_BASE _AC(0x9800000000000000, UL) -#else -#define CAC_BASE _AC(0xa800000000000000, UL) -#endif -#endif - -#ifndef IO_BASE -#define IO_BASE _AC(0x9000000000000000, UL) -#endif - -#ifndef UNCAC_BASE -#define UNCAC_BASE _AC(0x9000000000000000, UL) -#endif - -#ifndef MAP_BASE -#define MAP_BASE _AC(0xc000000000000000, UL) -#endif - -/* - * Memory above this physical address will be considered highmem. - * Fixme: 59 bits is a fictive number and makes assumptions about processors - * in the distant future. Nobody will care for a few years :-) - */ -#ifndef HIGHMEM_START -#define HIGHMEM_START (_AC(1, UL) << _AC(59, UL)) -#endif - -#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK)) -#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK)) -#define TO_UNCAC(x) (UNCAC_BASE | ((x) & TO_PHYS_MASK)) - -#endif /* CONFIG_64BIT */ - -/* - * This handles the memory map. - */ -#ifndef PAGE_OFFSET -#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET) -#endif - -#endif /* __ASM_MACH_GENERIC_SPACES_H */ diff --git a/include/asm-mips/mach-generic/topology.h b/include/asm-mips/mach-generic/topology.h deleted file mode 100644 index 5428f333a02c..000000000000 --- a/include/asm-mips/mach-generic/topology.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-mips/mach-ip22/cpu-feature-overrides.h b/include/asm-mips/mach-ip22/cpu-feature-overrides.h deleted file mode 100644 index 9c8735158da1..000000000000 --- a/include/asm-mips/mach-ip22/cpu-feature-overrides.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 07 Ralf Baechle - */ -#ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H - -/* - * IP22 with a variety of processors so we can't use defaults for everything. - */ -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_4k_cache 1 -#define cpu_has_fpu 1 -#define cpu_has_32fpr 1 -#define cpu_has_counter 1 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_cache_cdex_p 1 -#define cpu_has_prefetch 0 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 /* Needs to change for R8000 */ -#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) -#define cpu_has_ic_fills_f_dc 0 - -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-ip22/ds1286.h b/include/asm-mips/mach-ip22/ds1286.h deleted file mode 100644 index f19f1eafbc71..000000000000 --- a/include/asm-mips/mach-ip22/ds1286.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2001, 03 by Ralf Baechle - * - * RTC routines for PC style attached Dallas chip. - */ -#ifndef __ASM_MACH_IP22_DS1286_H -#define __ASM_MACH_IP22_DS1286_H - -#include - -#define rtc_read(reg) (hpc3c0->rtcregs[(reg)] & 0xff) -#define rtc_write(data, reg) do { hpc3c0->rtcregs[(reg)] = (data); } while(0) - -#endif /* __ASM_MACH_IP22_DS1286_H */ diff --git a/include/asm-mips/mach-ip22/spaces.h b/include/asm-mips/mach-ip22/spaces.h deleted file mode 100644 index 7f9fa6f66059..000000000000 --- a/include/asm-mips/mach-ip22/spaces.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle - * Copyright (C) 2000, 2002 Maciej W. Rozycki - * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_MACH_IP22_SPACES_H -#define _ASM_MACH_IP22_SPACES_H - - -#ifdef CONFIG_64BIT - -#define PAGE_OFFSET 0xffffffff80000000UL - -#define CAC_BASE 0xffffffff80000000 -#define IO_BASE 0xffffffffa0000000 -#define UNCAC_BASE 0xffffffffa0000000 -#define MAP_BASE 0xc000000000000000 - -#endif /* CONFIG_64BIT */ - -#include - -#endif /* __ASM_MACH_IP22_SPACES_H */ diff --git a/include/asm-mips/mach-ip22/war.h b/include/asm-mips/mach-ip22/war.h deleted file mode 100644 index a44fa9656a82..000000000000 --- a/include/asm-mips/mach-ip22/war.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_IP22_WAR_H -#define __ASM_MIPS_MACH_IP22_WAR_H - -/* - * R4600 CPU modules for the Indy come with both V1.7 and V2.0 processors. - */ - -#define R4600_V1_INDEX_ICACHEOP_WAR 1 -#define R4600_V1_HIT_CACHEOP_WAR 1 -#define R4600_V2_HIT_CACHEOP_WAR 1 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_IP22_WAR_H */ diff --git a/include/asm-mips/mach-ip27/cpu-feature-overrides.h b/include/asm-mips/mach-ip27/cpu-feature-overrides.h deleted file mode 100644 index 7d3112b148d9..000000000000 --- a/include/asm-mips/mach-ip27/cpu-feature-overrides.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 07 Ralf Baechle - */ -#ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H - -/* - * IP27 only comes with R10000 family processors all using the same config - */ -#define cpu_has_watch 1 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_icache_snoops_remote_store 1 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_has_4kex 1 -#define cpu_has_3k_cache 0 -#define cpu_has_6k_cache 0 -#define cpu_has_4k_cache 1 -#define cpu_has_8k_cache 0 -#define cpu_has_tx39_cache 0 - -#define cpu_has_inclusive_pcaches 1 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 64 -#define cpu_scache_line_size() 128 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-ip27/dma-coherence.h b/include/asm-mips/mach-ip27/dma-coherence.h deleted file mode 100644 index ed7e6222dc15..000000000000 --- a/include/asm-mips/mach-ip27/dma-coherence.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 Ralf Baechle - * - */ -#ifndef __ASM_MACH_IP27_DMA_COHERENCE_H -#define __ASM_MACH_IP27_DMA_COHERENCE_H - -#include - -#define pdev_to_baddr(pdev, addr) \ - (BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr)) -#define dev_to_baddr(dev, addr) \ - pdev_to_baddr(to_pci_dev(dev), (addr)) - -struct device; - -static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, - size_t size) -{ - dma_addr_t pa = dev_to_baddr(dev, virt_to_phys(addr)); - - return pa; -} - -static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) -{ - dma_addr_t pa = dev_to_baddr(dev, page_to_phys(page)); - - return pa; -} - -static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) -{ - return dma_addr & ~(0xffUL << 56); -} - -static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) -{ -} - -static inline int plat_device_is_coherent(struct device *dev) -{ - return 1; /* IP27 non-cohernet mode is unsupported */ -} - -#endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-ip27/irq.h b/include/asm-mips/mach-ip27/irq.h deleted file mode 100644 index cf4384bfa846..000000000000 --- a/include/asm-mips/mach-ip27/irq.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999, 2000, 01, 02, 03 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - * Copyright (C) 2001 Kanoj Sarcar - */ -#ifndef __ASM_MACH_IP27_IRQ_H -#define __ASM_MACH_IP27_IRQ_H - -/* - * A hardwired interrupt number is completly stupid for this system - a - * large configuration might have thousands if not tenthousands of - * interrupts. - */ -#define NR_IRQS 256 - -#include_next - -#endif /* __ASM_MACH_IP27_IRQ_H */ diff --git a/include/asm-mips/mach-ip27/kernel-entry-init.h b/include/asm-mips/mach-ip27/kernel-entry-init.h deleted file mode 100644 index 624d66c7f290..000000000000 --- a/include/asm-mips/mach-ip27/kernel-entry-init.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Silicon Graphics, Inc. - * Copyright (C) 2005 Ralf Baechle - */ -#ifndef __ASM_MACH_IP27_KERNEL_ENTRY_H -#define __ASM_MACH_IP27_KERNEL_ENTRY_H - -#include -#include -#include - -/* - * Returns the local nasid into res. - */ - .macro GET_NASID_ASM res - dli \res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID) - ld \res, (\res) - and \res, NSRI_NODEID_MASK - dsrl \res, NSRI_NODEID_SHFT - .endm - -/* - * Intentionally empty macro, used in head.S. Override in - * arch/mips/mach-xxx/kernel-entry-init.h when necessary. - */ - .macro kernel_entry_setup - GET_NASID_ASM t1 - move t2, t1 # text and data are here - MAPPED_KERNEL_SETUP_TLB - .endm - -/* - * Do SMP slave processor setup necessary before we can savely execute C code. - */ - .macro smp_slave_setup - GET_NASID_ASM t1 - dli t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \ - KLDIR_OFF_POINTER + CAC_BASE - dsll t1, NASID_SHFT - or t0, t0, t1 - ld t0, 0(t0) # t0 points to kern_vars struct - lh t1, KV_RO_NASID_OFFSET(t0) - lh t2, KV_RW_NASID_OFFSET(t0) - MAPPED_KERNEL_SETUP_TLB - - /* - * We might not get launched at the address the kernel is linked to, - * so we jump there. - */ - PTR_LA t0, 0f - jr t0 -0: - .endm - -#endif /* __ASM_MACH_IP27_KERNEL_ENTRY_H */ diff --git a/include/asm-mips/mach-ip27/kmalloc.h b/include/asm-mips/mach-ip27/kmalloc.h deleted file mode 100644 index 426bd049b2d7..000000000000 --- a/include/asm-mips/mach-ip27/kmalloc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_MACH_IP27_KMALLOC_H -#define __ASM_MACH_IP27_KMALLOC_H - -/* - * All happy, no need to define ARCH_KMALLOC_MINALIGN - */ - -#endif /* __ASM_MACH_IP27_KMALLOC_H */ diff --git a/include/asm-mips/mach-ip27/mangle-port.h b/include/asm-mips/mach-ip27/mangle-port.h deleted file mode 100644 index f6e4912ea062..000000000000 --- a/include/asm-mips/mach-ip27/mangle-port.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2004 Ralf Baechle - */ -#ifndef __ASM_MACH_IP27_MANGLE_PORT_H -#define __ASM_MACH_IP27_MANGLE_PORT_H - -#define __swizzle_addr_b(port) (port) -#define __swizzle_addr_w(port) ((port) ^ 2) -#define __swizzle_addr_l(port) (port) -#define __swizzle_addr_q(port) (port) - -# define ioswabb(a, x) (x) -# define __mem_ioswabb(a, x) (x) -# define ioswabw(a, x) (x) -# define __mem_ioswabw(a, x) cpu_to_le16(x) -# define ioswabl(a, x) (x) -# define __mem_ioswabl(a, x) cpu_to_le32(x) -# define ioswabq(a, x) (x) -# define __mem_ioswabq(a, x) cpu_to_le32(x) - -#endif /* __ASM_MACH_IP27_MANGLE_PORT_H */ diff --git a/include/asm-mips/mach-ip27/mmzone.h b/include/asm-mips/mach-ip27/mmzone.h deleted file mode 100644 index 986a3b9b59a7..000000000000 --- a/include/asm-mips/mach-ip27/mmzone.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef _ASM_MACH_MMZONE_H -#define _ASM_MACH_MMZONE_H - -#include -#include -#include - -#define pa_to_nid(addr) NASID_TO_COMPACT_NODEID(NASID_GET(addr)) - -#define LEVELS_PER_SLICE 128 - -struct slice_data { - unsigned long irq_enable_mask[2]; - int level_to_irq[LEVELS_PER_SLICE]; -}; - -struct hub_data { - kern_vars_t kern_vars; - DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW); - cpumask_t h_cpus; - unsigned long slice_map; - unsigned long irq_alloc_mask[2]; - struct slice_data slice[2]; -}; - -struct node_data { - struct pglist_data pglist; - struct hub_data hub; -}; - -extern struct node_data *__node_data[]; - -#define NODE_DATA(n) (&__node_data[(n)]->pglist) -#define hub_data(n) (&__node_data[(n)]->hub) - -#endif /* _ASM_MACH_MMZONE_H */ diff --git a/include/asm-mips/mach-ip27/spaces.h b/include/asm-mips/mach-ip27/spaces.h deleted file mode 100644 index b18802a0b17e..000000000000 --- a/include/asm-mips/mach-ip27/spaces.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 99 Ralf Baechle - * Copyright (C) 2000, 2002 Maciej W. Rozycki - * Copyright (C) 1990, 1999 by Silicon Graphics, Inc. - */ -#ifndef _ASM_MACH_IP27_SPACES_H -#define _ASM_MACH_IP27_SPACES_H - -/* - * IP27 uses the R10000's uncached attribute feature. Attribute 3 selects - * uncached memory addressing. - */ - -#define HSPEC_BASE 0x9000000000000000 -#define IO_BASE 0x9200000000000000 -#define MSPEC_BASE 0x9400000000000000 -#define UNCAC_BASE 0x9600000000000000 - -#define TO_MSPEC(x) (MSPEC_BASE | ((x) & TO_PHYS_MASK)) -#define TO_HSPEC(x) (HSPEC_BASE | ((x) & TO_PHYS_MASK)) - -#define HIGHMEM_START (~0UL) - -#include - -#endif /* _ASM_MACH_IP27_SPACES_H */ diff --git a/include/asm-mips/mach-ip27/topology.h b/include/asm-mips/mach-ip27/topology.h deleted file mode 100644 index 7785bec732f2..000000000000 --- a/include/asm-mips/mach-ip27/topology.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef _ASM_MACH_TOPOLOGY_H -#define _ASM_MACH_TOPOLOGY_H 1 - -#include -#include -#include - -struct cpuinfo_ip27 { -// cpuid_t p_cpuid; /* PROM assigned cpuid */ - cnodeid_t p_nodeid; /* my node ID in compact-id-space */ - nasid_t p_nasid; /* my node ID in numa-as-id-space */ - unsigned char p_slice; /* Physical position on node board */ -#if 0 - unsigned long loops_per_sec; - unsigned long ipi_count; - unsigned long irq_attempt[NR_IRQS]; - unsigned long smp_local_irq_count; - unsigned long prof_multiplier; - unsigned long prof_counter; -#endif -}; - -extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS]; - -#define cpu_to_node(cpu) (sn_cpu_info[(cpu)].p_nodeid) -#define parent_node(node) (node) -#define node_to_cpumask(node) (hub_data(node)->h_cpus) -#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node))) -struct pci_bus; -extern int pcibus_to_node(struct pci_bus *); - -#define pcibus_to_cpumask(bus) (cpu_online_map) - -extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; - -#define node_distance(from, to) (__node_distances[(from)][(to)]) - -/* sched_domains SD_NODE_INIT for SGI IP27 machines */ -#define SD_NODE_INIT (struct sched_domain) { \ - .span = CPU_MASK_NONE, \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ - .min_interval = 8, \ - .max_interval = 32, \ - .busy_factor = 32, \ - .imbalance_pct = 125, \ - .cache_nice_tries = 1, \ - .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_EXEC \ - | SD_WAKE_BALANCE, \ - .last_balance = jiffies, \ - .balance_interval = 1, \ - .nr_balance_failed = 0, \ -} - -#include - -#endif /* _ASM_MACH_TOPOLOGY_H */ diff --git a/include/asm-mips/mach-ip27/war.h b/include/asm-mips/mach-ip27/war.h deleted file mode 100644 index e2ddcc9b1fff..000000000000 --- a/include/asm-mips/mach-ip27/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_IP27_WAR_H -#define __ASM_MIPS_MACH_IP27_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 1 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_IP27_WAR_H */ diff --git a/include/asm-mips/mach-ip28/cpu-feature-overrides.h b/include/asm-mips/mach-ip28/cpu-feature-overrides.h deleted file mode 100644 index 9a53b326f848..000000000000 --- a/include/asm-mips/mach-ip28/cpu-feature-overrides.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Ralf Baechle - * 6/2004 pf - */ -#ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H - -/* - * IP28 only comes with R10000 family processors all using the same config - */ -#define cpu_has_watch 1 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 /* see probe_pcache() */ -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_icache_snoops_remote_store 1 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_has_4kex 1 -#define cpu_has_4k_cache 1 - -#define cpu_has_inclusive_pcaches 1 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 64 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-ip28/ds1286.h b/include/asm-mips/mach-ip28/ds1286.h deleted file mode 100644 index 471bb9a33e0f..000000000000 --- a/include/asm-mips/mach-ip28/ds1286.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASM_MACH_IP28_DS1286_H -#define __ASM_MACH_IP28_DS1286_H -#include -#endif /* __ASM_MACH_IP28_DS1286_H */ diff --git a/include/asm-mips/mach-ip28/spaces.h b/include/asm-mips/mach-ip28/spaces.h deleted file mode 100644 index 05aabb27e5e7..000000000000 --- a/include/asm-mips/mach-ip28/spaces.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle - * Copyright (C) 2000, 2002 Maciej W. Rozycki - * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. - * 2004 pf - */ -#ifndef _ASM_MACH_IP28_SPACES_H -#define _ASM_MACH_IP28_SPACES_H - -#define CAC_BASE 0xa800000000000000 - -#define HIGHMEM_START (~0UL) - -#define PHYS_OFFSET _AC(0x20000000, UL) - -#include - -#endif /* _ASM_MACH_IP28_SPACES_H */ diff --git a/include/asm-mips/mach-ip28/war.h b/include/asm-mips/mach-ip28/war.h deleted file mode 100644 index a1baafab486a..000000000000 --- a/include/asm-mips/mach-ip28/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_IP28_WAR_H -#define __ASM_MIPS_MACH_IP28_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 1 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_IP28_WAR_H */ diff --git a/include/asm-mips/mach-ip32/cpu-feature-overrides.h b/include/asm-mips/mach-ip32/cpu-feature-overrides.h deleted file mode 100644 index 6782fccebe8d..000000000000 --- a/include/asm-mips/mach-ip32/cpu-feature-overrides.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Ilya A. Volynets-Evenbakh - * Copyright (C) 2005, 07 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H - - -/* - * R5000 has an interesting "restriction": ll(d)/sc(d) - * instructions to XKPHYS region simply do uncached bus - * requests. This breaks all the atomic bitops functions. - * so, for 64bit IP32 kernel we just don't use ll/sc. - * This does not affect luserland. - */ -#if (defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_NEVADA)) && defined(CONFIG_64BIT) -#define cpu_has_llsc 0 -#else -#define cpu_has_llsc 1 -#endif - -/* Settings which are common for all ip32 CPUs */ -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_fpu 1 -#define cpu_has_32fpr 1 -#define cpu_has_counter 1 -#define cpu_has_mips16 0 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 -#define cpu_has_vtag_icache 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_has_4k_cache 1 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-ip32/dma-coherence.h b/include/asm-mips/mach-ip32/dma-coherence.h deleted file mode 100644 index a5511ebb2d53..000000000000 --- a/include/asm-mips/mach-ip32/dma-coherence.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 Ralf Baechle - * - */ -#ifndef __ASM_MACH_IP32_DMA_COHERENCE_H -#define __ASM_MACH_IP32_DMA_COHERENCE_H - -#include - -struct device; - -/* - * Few notes. - * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M - * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for - * native-endian) - * 3. All other devices see memory as one big chunk at 0x40000000 - * 4. Non-PCI devices will pass NULL as struct device* - * - * Thus we translate differently, depending on device. - */ - -#define RAM_OFFSET_MASK 0x3fffffffUL - -static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, - size_t size) -{ - dma_addr_t pa = virt_to_phys(addr) & RAM_OFFSET_MASK; - - if (dev == NULL) - pa += CRIME_HI_MEM_BASE; - - return pa; -} - -static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) -{ - dma_addr_t pa; - - pa = page_to_phys(page) & RAM_OFFSET_MASK; - - if (dev == NULL) - pa += CRIME_HI_MEM_BASE; - - return pa; -} - -/* This is almost certainly wrong but it's what dma-ip32.c used to use */ -static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) -{ - unsigned long addr = dma_addr & RAM_OFFSET_MASK; - - if (dma_addr >= 256*1024*1024) - addr += CRIME_HI_MEM_BASE; - - return addr; -} - -static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) -{ -} - -static inline int plat_device_is_coherent(struct device *dev) -{ - return 0; /* IP32 is non-cohernet */ -} - -#endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-ip32/kmalloc.h b/include/asm-mips/mach-ip32/kmalloc.h deleted file mode 100644 index b1e0be60f720..000000000000 --- a/include/asm-mips/mach-ip32/kmalloc.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_MACH_IP32_KMALLOC_H -#define __ASM_MACH_IP32_KMALLOC_H - - -#if defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_RM7000) -#define ARCH_KMALLOC_MINALIGN 32 -#else -#define ARCH_KMALLOC_MINALIGN 128 -#endif - -#endif /* __ASM_MACH_IP32_KMALLOC_H */ diff --git a/include/asm-mips/mach-ip32/mangle-port.h b/include/asm-mips/mach-ip32/mangle-port.h deleted file mode 100644 index f1d0f1756a9f..000000000000 --- a/include/asm-mips/mach-ip32/mangle-port.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Ladislav Michl - * Copyright (C) 2004 Ralf Baechle - */ -#ifndef __ASM_MACH_IP32_MANGLE_PORT_H -#define __ASM_MACH_IP32_MANGLE_PORT_H - -#define __swizzle_addr_b(port) ((port) ^ 3) -#define __swizzle_addr_w(port) ((port) ^ 2) -#define __swizzle_addr_l(port) (port) -#define __swizzle_addr_q(port) (port) - -# define ioswabb(a, x) (x) -# define __mem_ioswabb(a, x) (x) -# define ioswabw(a, x) (x) -# define __mem_ioswabw(a, x) cpu_to_le16(x) -# define ioswabl(a, x) (x) -# define __mem_ioswabl(a, x) cpu_to_le32(x) -# define ioswabq(a, x) (x) -# define __mem_ioswabq(a, x) cpu_to_le32(x) - -#endif /* __ASM_MACH_IP32_MANGLE_PORT_H */ diff --git a/include/asm-mips/mach-ip32/mc146818rtc.h b/include/asm-mips/mach-ip32/mc146818rtc.h deleted file mode 100644 index c28ba8d84076..000000000000 --- a/include/asm-mips/mach-ip32/mc146818rtc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2001, 03 by Ralf Baechle - * Copyright (C) 2000 Harald Koerfgen - * - * RTC routines for IP32 style attached Dallas chip. - */ -#ifndef __ASM_MACH_IP32_MC146818RTC_H -#define __ASM_MACH_IP32_MC146818RTC_H - -#include - -#define RTC_PORT(x) (0x70 + (x)) - -static unsigned char CMOS_READ(unsigned long addr) -{ - return mace->isa.rtc[addr << 8]; -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long addr) -{ - mace->isa.rtc[addr << 8] = data; -} - -/* - * FIXME: Do it right. For now just assume that noone lives in 20th century - * and no O2 user in 22th century ;-) - */ -#define mc146818_decode_year(year) ((year) + 2000) - -#define RTC_ALWAYS_BCD 0 - -#endif /* __ASM_MACH_IP32_MC146818RTC_H */ diff --git a/include/asm-mips/mach-ip32/war.h b/include/asm-mips/mach-ip32/war.h deleted file mode 100644 index d194056dcd7a..000000000000 --- a/include/asm-mips/mach-ip32/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_IP32_WAR_H -#define __ASM_MIPS_MACH_IP32_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_IP32_WAR_H */ diff --git a/include/asm-mips/mach-jazz/dma-coherence.h b/include/asm-mips/mach-jazz/dma-coherence.h deleted file mode 100644 index d66979a124a8..000000000000 --- a/include/asm-mips/mach-jazz/dma-coherence.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 Ralf Baechle - */ -#ifndef __ASM_MACH_JAZZ_DMA_COHERENCE_H -#define __ASM_MACH_JAZZ_DMA_COHERENCE_H - -#include - -struct device; - -static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) -{ - return vdma_alloc(virt_to_phys(addr), size); -} - -static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) -{ - return vdma_alloc(page_to_phys(page), PAGE_SIZE); -} - -static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) -{ - return vdma_log2phys(dma_addr); -} - -static void plat_unmap_dma_mem(dma_addr_t dma_addr) -{ - vdma_free(dma_addr); -} - -static inline int plat_device_is_coherent(struct device *dev) -{ - return 0; -} - -#endif /* __ASM_MACH_JAZZ_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-jazz/floppy.h b/include/asm-mips/mach-jazz/floppy.h deleted file mode 100644 index 56e9ca6ae426..000000000000 --- a/include/asm-mips/mach-jazz/floppy.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2003 by Ralf Baechle - */ -#ifndef __ASM_MACH_JAZZ_FLOPPY_H -#define __ASM_MACH_JAZZ_FLOPPY_H - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static inline unsigned char fd_inb(unsigned int port) -{ - unsigned char c; - - c = *(volatile unsigned char *) port; - udelay(1); - - return c; -} - -static inline void fd_outb(unsigned char value, unsigned int port) -{ - *(volatile unsigned char *) port = value; -} - -/* - * How to access the floppy DMA functions. - */ -static inline void fd_enable_dma(void) -{ - vdma_enable(JAZZ_FLOPPY_DMA); -} - -static inline void fd_disable_dma(void) -{ - vdma_disable(JAZZ_FLOPPY_DMA); -} - -static inline int fd_request_dma(void) -{ - return 0; -} - -static inline void fd_free_dma(void) -{ -} - -static inline void fd_clear_dma_ff(void) -{ -} - -static inline void fd_set_dma_mode(char mode) -{ - vdma_set_mode(JAZZ_FLOPPY_DMA, mode); -} - -static inline void fd_set_dma_addr(char *a) -{ - vdma_set_addr(JAZZ_FLOPPY_DMA, vdma_phys2log(CPHYSADDR((unsigned long)a))); -} - -static inline void fd_set_dma_count(unsigned int count) -{ - vdma_set_count(JAZZ_FLOPPY_DMA, count); -} - -static inline int fd_get_dma_residue(void) -{ - return vdma_get_residue(JAZZ_FLOPPY_DMA); -} - -static inline void fd_enable_irq(void) -{ -} - -static inline void fd_disable_irq(void) -{ -} - -static inline int fd_request_irq(void) -{ - return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); -} - -static inline void fd_free_irq(void) -{ - free_irq(FLOPPY_IRQ, NULL); -} - -static inline unsigned long fd_getfdaddr1(void) -{ - return JAZZ_FDC_BASE; -} - -static inline unsigned long fd_dma_mem_alloc(unsigned long size) -{ - unsigned long mem; - - mem = __get_dma_pages(GFP_KERNEL, get_order(size)); - if(!mem) - return 0; - vdma_alloc(CPHYSADDR(mem), size); /* XXX error checking */ - - return mem; -} - -static inline void fd_dma_mem_free(unsigned long addr, unsigned long size) -{ - vdma_free(vdma_phys2log(CPHYSADDR(addr))); - free_pages(addr, get_order(size)); -} - -static inline unsigned long fd_drive_type(unsigned long n) -{ - /* XXX This is wrong for machines with ED 2.88mb disk drives like the - Olivetti M700. Anyway, we should suck this from the ARC - firmware. */ - if (n == 0) - return 4; /* 3,5", 1.44mb */ - - return 0; -} - -#endif /* __ASM_MACH_JAZZ_FLOPPY_H */ diff --git a/include/asm-mips/mach-jazz/mc146818rtc.h b/include/asm-mips/mach-jazz/mc146818rtc.h deleted file mode 100644 index 987f727afe25..000000000000 --- a/include/asm-mips/mach-jazz/mc146818rtc.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2001, 03 by Ralf Baechle - * Copyright (C) 2007 Thomas Bogendoerfer - * - * RTC routines for Jazz style attached Dallas chip. - */ -#ifndef __ASM_MACH_JAZZ_MC146818RTC_H -#define __ASM_MACH_JAZZ_MC146818RTC_H - -#include - -#include -#include - -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_IRQ 8 - -static inline unsigned char CMOS_READ(unsigned long addr) -{ - outb_p(addr, RTC_PORT(0)); - return *(volatile char *)JAZZ_RTC_BASE; -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long addr) -{ - outb_p(addr, RTC_PORT(0)); - *(volatile char *)JAZZ_RTC_BASE = data; -} - -#define RTC_ALWAYS_BCD 0 - -#define mc146818_decode_year(year) ((year) + 1980) - -#endif /* __ASM_MACH_JAZZ_MC146818RTC_H */ diff --git a/include/asm-mips/mach-jazz/war.h b/include/asm-mips/mach-jazz/war.h deleted file mode 100644 index 6158ee861bfd..000000000000 --- a/include/asm-mips/mach-jazz/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_JAZZ_WAR_H -#define __ASM_MIPS_MACH_JAZZ_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_JAZZ_WAR_H */ diff --git a/include/asm-mips/mach-lasat/irq.h b/include/asm-mips/mach-lasat/irq.h deleted file mode 100644 index 3a282419d5f9..000000000000 --- a/include/asm-mips/mach-lasat/irq.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_MACH_LASAT_IRQ_H -#define _ASM_MACH_LASAT_IRQ_H - -#define LASAT_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 2) - -#define LASAT_IRQ_BASE 8 -#define LASAT_IRQ_END 23 - -#define NR_IRQS 24 - -#include_next - -#endif /* _ASM_MACH_LASAT_IRQ_H */ diff --git a/include/asm-mips/mach-lasat/mach-gt64120.h b/include/asm-mips/mach-lasat/mach-gt64120.h deleted file mode 100644 index 1a9ad45cc135..000000000000 --- a/include/asm-mips/mach-lasat/mach-gt64120.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This is a direct copy of the ev96100.h file, with a global - * search and replace. The numbers are the same. - * - * The reason I'm duplicating this is so that the 64120/96100 - * defines won't be confusing in the source code. - */ -#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H -#define _ASM_GT64120_LASAT_GT64120_DEP_H - -/* - * GT64120 config space base address on Lasat 100 - */ -#define GT64120_BASE (KSEG1ADDR(0x14000000)) - -/* - * PCI Bus allocation - * - * (Guessing ...) - */ -#define GT_PCI_MEM_BASE 0x12000000UL -#define GT_PCI_MEM_SIZE 0x02000000UL -#define GT_PCI_IO_BASE 0x10000000UL -#define GT_PCI_IO_SIZE 0x02000000UL -#define GT_ISA_IO_BASE PCI_IO_BASE - -#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */ diff --git a/include/asm-mips/mach-lasat/war.h b/include/asm-mips/mach-lasat/war.h deleted file mode 100644 index bb1e0325c9be..000000000000 --- a/include/asm-mips/mach-lasat/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_LASAT_WAR_H -#define __ASM_MIPS_MACH_LASAT_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_LASAT_WAR_H */ diff --git a/include/asm-mips/mach-lemote/dma-coherence.h b/include/asm-mips/mach-lemote/dma-coherence.h deleted file mode 100644 index 7e914777ebc4..000000000000 --- a/include/asm-mips/mach-lemote/dma-coherence.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006, 07 Ralf Baechle - * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - */ -#ifndef __ASM_MACH_LEMOTE_DMA_COHERENCE_H -#define __ASM_MACH_LEMOTE_DMA_COHERENCE_H - -struct device; - -static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, - size_t size) -{ - return virt_to_phys(addr) | 0x80000000; -} - -static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, - struct page *page) -{ - return page_to_phys(page) | 0x80000000; -} - -static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) -{ - return dma_addr & 0x7fffffff; -} - -static inline void plat_unmap_dma_mem(dma_addr_t dma_addr) -{ -} - -static inline int plat_device_is_coherent(struct device *dev) -{ - return 0; -} - -#endif /* __ASM_MACH_LEMOTE_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-lemote/mc146818rtc.h b/include/asm-mips/mach-lemote/mc146818rtc.h deleted file mode 100644 index ed5147e11085..000000000000 --- a/include/asm-mips/mach-lemote/mc146818rtc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org) - * - * RTC routines for PC style attached Dallas chip. - */ -#ifndef __ASM_MACH_LEMOTE_MC146818RTC_H -#define __ASM_MACH_LEMOTE_MC146818RTC_H - -#include - -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_IRQ 8 - -static inline unsigned char CMOS_READ(unsigned long addr) -{ - outb_p(addr, RTC_PORT(0)); - return inb_p(RTC_PORT(1)); -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long addr) -{ - outb_p(addr, RTC_PORT(0)); - outb_p(data, RTC_PORT(1)); -} - -#define RTC_ALWAYS_BCD 0 - -#ifndef mc146818_decode_year -#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970) -#endif - -#endif /* __ASM_MACH_LEMOTE_MC146818RTC_H */ diff --git a/include/asm-mips/mach-lemote/war.h b/include/asm-mips/mach-lemote/war.h deleted file mode 100644 index 05f89e0f2a11..000000000000 --- a/include/asm-mips/mach-lemote/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_LEMOTE_WAR_H -#define __ASM_MIPS_MACH_LEMOTE_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_LEMOTE_WAR_H */ diff --git a/include/asm-mips/mach-malta/cpu-feature-overrides.h b/include/asm-mips/mach-malta/cpu-feature-overrides.h deleted file mode 100644 index 7f3e3f9bd23a..000000000000 --- a/include/asm-mips/mach-malta/cpu-feature-overrides.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2004 Chris Dearman - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H - - -/* - * CPU feature overrides for MIPS boards - */ -#ifdef CONFIG_CPU_MIPS32 -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_4k_cache 1 -/* #define cpu_has_fpu ? */ -/* #define cpu_has_32fpr ? */ -#define cpu_has_counter 1 -/* #define cpu_has_watch ? */ -#define cpu_has_divec 1 -#define cpu_has_vce 0 -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ -/* #define cpu_has_prefetch ? */ -#define cpu_has_mcheck 1 -/* #define cpu_has_ejtag ? */ -#ifdef CONFIG_CPU_HAS_LLSC -#define cpu_has_llsc 1 -#else -#define cpu_has_llsc 0 -#endif -/* #define cpu_has_vtag_icache ? */ -/* #define cpu_has_dc_aliases ? */ -/* #define cpu_has_ic_fills_f_dc ? */ -#define cpu_has_nofpuex 0 -/* #define cpu_has_64bits ? */ -/* #define cpu_has_64bit_zero_reg ? */ -/* #define cpu_has_inclusive_pcaches ? */ -#define cpu_icache_snoops_remote_store 1 -#endif - -#ifdef CONFIG_CPU_MIPS64 -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_4k_cache 1 -/* #define cpu_has_fpu ? */ -/* #define cpu_has_32fpr ? */ -#define cpu_has_counter 1 -/* #define cpu_has_watch ? */ -#define cpu_has_divec 1 -#define cpu_has_vce 0 -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ -/* #define cpu_has_prefetch ? */ -#define cpu_has_mcheck 1 -/* #define cpu_has_ejtag ? */ -#define cpu_has_llsc 1 -/* #define cpu_has_vtag_icache ? */ -/* #define cpu_has_dc_aliases ? */ -/* #define cpu_has_ic_fills_f_dc ? */ -#define cpu_has_nofpuex 0 -/* #define cpu_has_64bits ? */ -/* #define cpu_has_64bit_zero_reg ? */ -/* #define cpu_has_inclusive_pcaches ? */ -#define cpu_icache_snoops_remote_store 1 -#endif - -#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-malta/irq.h b/include/asm-mips/mach-malta/irq.h deleted file mode 100644 index 9b9da26683c2..000000000000 --- a/include/asm-mips/mach-malta/irq.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_MACH_MIPS_IRQ_H -#define __ASM_MACH_MIPS_IRQ_H - - -#define NR_IRQS 256 - -#include_next - -#endif /* __ASM_MACH_MIPS_IRQ_H */ diff --git a/include/asm-mips/mach-malta/kernel-entry-init.h b/include/asm-mips/mach-malta/kernel-entry-init.h deleted file mode 100644 index 0b793e7bf67e..000000000000 --- a/include/asm-mips/mach-malta/kernel-entry-init.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Chris Dearman (chris@mips.com) - * Copyright (C) 2007 Mips Technologies, Inc. - */ -#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H -#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H - - .macro kernel_entry_setup -#ifdef CONFIG_MIPS_MT_SMTC - mfc0 t0, CP0_CONFIG - bgez t0, 9f - mfc0 t0, CP0_CONFIG, 1 - bgez t0, 9f - mfc0 t0, CP0_CONFIG, 2 - bgez t0, 9f - mfc0 t0, CP0_CONFIG, 3 - and t0, 1<<2 - bnez t0, 0f -9: - /* Assume we came from YAMON... */ - PTR_LA v0, 0x9fc00534 /* YAMON print */ - lw v0, (v0) - move a0, zero - PTR_LA a1, nonmt_processor - jal v0 - - PTR_LA v0, 0x9fc00520 /* YAMON exit */ - lw v0, (v0) - li a0, 1 - jal v0 - -1: b 1b - - __INITDATA -nonmt_processor: - .asciz "SMTC kernel requires the MT ASE to run\n" - __FINIT -0: -#endif - .endm - -/* - * Do SMP slave processor setup necessary before we can safely execute C code. - */ - .macro smp_slave_setup - .endm - -#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */ diff --git a/include/asm-mips/mach-malta/mach-gt64120.h b/include/asm-mips/mach-malta/mach-gt64120.h deleted file mode 100644 index 0f863148f3b6..000000000000 --- a/include/asm-mips/mach-malta/mach-gt64120.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * This is a direct copy of the ev96100.h file, with a global - * search and replace. The numbers are the same. - * - * The reason I'm duplicating this is so that the 64120/96100 - * defines won't be confusing in the source code. - */ -#ifndef _ASM_MACH_MIPS_MACH_GT64120_DEP_H -#define _ASM_MACH_MIPS_MACH_GT64120_DEP_H - -#define MIPS_GT_BASE 0x1be00000 - -extern unsigned long _pcictrl_gt64120; -/* - * GT64120 config space base address - */ -#define GT64120_BASE _pcictrl_gt64120 - -#endif /* _ASM_MACH_MIPS_MACH_GT64120_DEP_H */ diff --git a/include/asm-mips/mach-malta/mc146818rtc.h b/include/asm-mips/mach-malta/mc146818rtc.h deleted file mode 100644 index ea612f37f614..000000000000 --- a/include/asm-mips/mach-malta/mc146818rtc.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * Copyright (C) 2003 by Ralf Baechle - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * RTC routines for Malta style attached PIIX4 device, which contains a - * Motorola MC146818A-compatible Real Time Clock. - */ -#ifndef __ASM_MACH_MALTA_MC146818RTC_H -#define __ASM_MACH_MALTA_MC146818RTC_H - -#include -#include -#include - -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_IRQ 8 - -static inline unsigned char CMOS_READ(unsigned long addr) -{ - outb(addr, MALTA_RTC_ADR_REG); - return inb(MALTA_RTC_DAT_REG); -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long addr) -{ - outb(addr, MALTA_RTC_ADR_REG); - outb(data, MALTA_RTC_DAT_REG); -} - -#define RTC_ALWAYS_BCD 0 - -#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) - -#endif /* __ASM_MACH_MALTA_MC146818RTC_H */ diff --git a/include/asm-mips/mach-malta/war.h b/include/asm-mips/mach-malta/war.h deleted file mode 100644 index 7c6931d5f45f..000000000000 --- a/include/asm-mips/mach-malta/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_MIPS_WAR_H -#define __ASM_MIPS_MACH_MIPS_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 1 -#define MIPS_CACHE_SYNC_WAR 1 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ diff --git a/include/asm-mips/mach-mipssim/cpu-feature-overrides.h b/include/asm-mips/mach-mipssim/cpu-feature-overrides.h deleted file mode 100644 index 779b02205737..000000000000 --- a/include/asm-mips/mach-mipssim/cpu-feature-overrides.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2004 Chris Dearman - */ -#ifndef __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H - - -/* - * CPU feature overrides for MIPS boards - */ -#ifdef CONFIG_CPU_MIPS32 -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_4k_cache 1 -#define cpu_has_fpu 0 -/* #define cpu_has_32fpr ? */ -#define cpu_has_counter 1 -/* #define cpu_has_watch ? */ -#define cpu_has_divec 1 -#define cpu_has_vce 0 -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ -/* #define cpu_has_prefetch ? */ -#define cpu_has_mcheck 1 -/* #define cpu_has_ejtag ? */ -#define cpu_has_llsc 1 -/* #define cpu_has_vtag_icache ? */ -/* #define cpu_has_dc_aliases ? */ -/* #define cpu_has_ic_fills_f_dc ? */ -#define cpu_has_nofpuex 0 -/* #define cpu_has_64bits ? */ -/* #define cpu_has_64bit_zero_reg ? */ -/* #define cpu_has_inclusive_pcaches ? */ -#endif - -#ifdef CONFIG_CPU_MIPS64 -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_4k_cache 1 -/* #define cpu_has_fpu ? */ -/* #define cpu_has_32fpr ? */ -#define cpu_has_counter 1 -/* #define cpu_has_watch ? */ -#define cpu_has_divec 1 -#define cpu_has_vce 0 -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ -/* #define cpu_has_prefetch ? */ -#define cpu_has_mcheck 1 -/* #define cpu_has_ejtag ? */ -#define cpu_has_llsc 1 -/* #define cpu_has_vtag_icache ? */ -/* #define cpu_has_dc_aliases ? */ -/* #define cpu_has_ic_fills_f_dc ? */ -#define cpu_has_nofpuex 0 -/* #define cpu_has_64bits ? */ -/* #define cpu_has_64bit_zero_reg ? */ -/* #define cpu_has_inclusive_pcaches ? */ -#endif - -#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-mipssim/war.h b/include/asm-mips/mach-mipssim/war.h deleted file mode 100644 index c8a74a3515e0..000000000000 --- a/include/asm-mips/mach-mipssim/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_MIPSSIM_WAR_H -#define __ASM_MIPS_MACH_MIPSSIM_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_MIPSSIM_WAR_H */ diff --git a/include/asm-mips/mach-pb1x00/mc146818rtc.h b/include/asm-mips/mach-pb1x00/mc146818rtc.h deleted file mode 100644 index 622c58710e5b..000000000000 --- a/include/asm-mips/mach-pb1x00/mc146818rtc.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2001, 03 by Ralf Baechle - * - * RTC routines for PC style attached Dallas chip. - */ -#ifndef __ASM_MACH_AU1XX_MC146818RTC_H -#define __ASM_MACH_AU1XX_MC146818RTC_H - -#include -#include - -#define RTC_PORT(x) (0x0c000000 + (x)) -#define RTC_IRQ 8 -#define PB1500_RTC_ADDR 0x0c000000 - -static inline unsigned char CMOS_READ(unsigned long offset) -{ - offset <<= 2; - return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff); -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long offset) -{ - offset <<= 2; - au_writel(data, offset + PB1500_RTC_ADDR); -} - -#define RTC_ALWAYS_BCD 1 - -#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1000.h b/include/asm-mips/mach-pb1x00/pb1000.h deleted file mode 100644 index 6d1ff9060e44..000000000000 --- a/include/asm-mips/mach-pb1x00/pb1000.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Alchemy Semi Pb1000 Referrence Board - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1000_H -#define __ASM_PB1000_H - -/* PCMCIA PB1000 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -#define PB1000_PCR 0xBE000000 -# define PCR_SLOT_0_VPP0 (1 << 0) -# define PCR_SLOT_0_VPP1 (1 << 1) -# define PCR_SLOT_0_VCC0 (1 << 2) -# define PCR_SLOT_0_VCC1 (1 << 3) -# define PCR_SLOT_0_RST (1 << 4) -# define PCR_SLOT_1_VPP0 (1 << 8) -# define PCR_SLOT_1_VPP1 (1 << 9) -# define PCR_SLOT_1_VCC0 (1 << 10) -# define PCR_SLOT_1_VCC1 (1 << 11) -# define PCR_SLOT_1_RST (1 << 12) - -#define PB1000_MDR 0xBE000004 -# define MDR_PI (1 << 5) /* PCMCIA int latch */ -# define MDR_EPI (1 << 14) /* enable PCMCIA int */ -# define MDR_CPI (1 << 15) /* clear PCMCIA int */ - -#define PB1000_ACR1 0xBE000008 -# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */ -# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */ -# define ACR1_SLOT_0_READY (1 << 2) /* ready */ -# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */ -# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */ -# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */ -# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */ -# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */ -# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */ -# define ACR1_SLOT_1_READY (1 << 10) /* ready */ -# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */ -# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */ -# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */ -# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */ - -#define CPLD_AUX0 0xBE00000C -#define CPLD_AUX1 0xBE000010 -#define CPLD_AUX2 0xBE000014 - -/* Voltage levels */ - -/* VPPEN1 - VPPEN0 */ -#define VPP_GND ((0 << 1) | (0 << 0)) -#define VPP_5V ((1 << 1) | (0 << 0)) -#define VPP_3V ((0 << 1) | (1 << 0)) -#define VPP_12V ((0 << 1) | (1 << 0)) -#define VPP_HIZ ((1 << 1) | (1 << 0)) - -/* VCCEN1 - VCCEN0 */ -#define VCC_3V ((0 << 1) | (1 << 0)) -#define VCC_5V ((1 << 1) | (0 << 0)) -#define VCC_HIZ ((0 << 1) | (0 << 0)) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT) \ - ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) -#endif /* __ASM_PB1000_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1100.h b/include/asm-mips/mach-pb1x00/pb1100.h deleted file mode 100644 index b1a60f1cbd02..000000000000 --- a/include/asm-mips/mach-pb1x00/pb1100.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Alchemy Semi Pb1100 Referrence Board - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1100_H -#define __ASM_PB1100_H - -#define PB1100_IDENT 0xAE000000 -#define BOARD_STATUS_REG 0xAE000004 -# define PB1100_ROM_SEL (1 << 15) -# define PB1100_ROM_SIZ (1 << 14) -# define PB1100_SWAP_BOOT (1 << 13) -# define PB1100_FLASH_WP (1 << 12) -# define PB1100_ROM_H_STS (1 << 11) -# define PB1100_ROM_L_STS (1 << 10) -# define PB1100_FLASH_H_STS (1 << 9) -# define PB1100_FLASH_L_STS (1 << 8) -# define PB1100_SRAM_SIZ (1 << 7) -# define PB1100_TSC_BUSY (1 << 6) -# define PB1100_PCMCIA_VS_MASK (3 << 4) -# define PB1100_RS232_CD (1 << 3) -# define PB1100_RS232_CTS (1 << 2) -# define PB1100_RS232_DSR (1 << 1) -# define PB1100_RS232_RI (1 << 0) - -#define PB1100_IRDA_RS232 0xAE00000C -# define PB1100_IRDA_FULL (0 << 14) /* full power */ -# define PB1100_IRDA_SHUTDOWN (1 << 14) -# define PB1100_IRDA_TT (2 << 14) /* 2/3 power */ -# define PB1100_IRDA_OT (3 << 14) /* 1/3 power */ -# define PB1100_IRDA_FIR (1 << 13) - -#define PCMCIA_BOARD_REG 0xAE000010 -# define PB1100_SD_WP1_RO (1 << 15) /* read only */ -# define PB1100_SD_WP0_RO (1 << 14) /* read only */ -# define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */ -# define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */ -# define PB1100_SEL_SD_CONN1 (1 << 9) -# define PB1100_SEL_SD_CONN0 (1 << 8) -# define PC_DEASSERT_RST (1 << 7) -# define PC_DRV_EN (1 << 4) - -#define PB1100_G_CONTROL 0xAE000014 /* graphics control */ - -#define PB1100_RST_VDDI 0xAE00001C -# define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */ -# define PB1100_VDDI_MASK 0x1F - -#define PB1100_LEDS 0xAE000018 - -/* - * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED. - * 7:0 is the LED Display's decimal points. - */ -#define PB1100_HEX_LED 0xAE000018 - -/* PCMCIA Pb1100 specific defines */ -#define PCMCIA_MAX_SOCK 0 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) - -#endif /* __ASM_PB1100_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h deleted file mode 100644 index c8618df88cb5..000000000000 --- a/include/asm-mips/mach-pb1x00/pb1200.h +++ /dev/null @@ -1,259 +0,0 @@ -/* - * AMD Alchemy Pb1200 Referrence Board - * Board Registers defines. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1200_H -#define __ASM_PB1200_H - -#include -#include - -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX - -/* - * SPI and SMB are muxed on the Pb1200 board. - * Refer to board documentation. - */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR -/* - * AC97 and I2S are muxed on the Pb1200 board. - * Refer to board documentation. - */ -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define I2S_PSC_BASE PSC1_BASE_ADDR - -#define BCSR_KSEG1_ADDR 0xAD800000 - -typedef volatile struct -{ - /*00*/ u16 whoami; - u16 reserved0; - /*04*/ u16 status; - u16 reserved1; - /*08*/ u16 switches; - u16 reserved2; - /*0C*/ u16 resets; - u16 reserved3; - - /*10*/ u16 pcmcia; - u16 reserved4; - /*14*/ u16 board; - u16 reserved5; - /*18*/ u16 disk_leds; - u16 reserved6; - /*1C*/ u16 system; - u16 reserved7; - - /*20*/ u16 intclr; - u16 reserved8; - /*24*/ u16 intset; - u16 reserved9; - /*28*/ u16 intclr_mask; - u16 reserved10; - /*2C*/ u16 intset_mask; - u16 reserved11; - - /*30*/ u16 sig_status; - u16 reserved12; - /*34*/ u16 int_status; - u16 reserved13; - /*38*/ u16 reserved14; - u16 reserved15; - /*3C*/ u16 reserved16; - u16 reserved17; - -} BCSR; - -static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; - -/* - * Register bit definitions for the BCSRs - */ -#define BCSR_WHOAMI_DCID 0x000F -#define BCSR_WHOAMI_CPLD 0x00F0 -#define BCSR_WHOAMI_BOARD 0x0F00 - -#define BCSR_STATUS_PCMCIA0VS 0x0003 -#define BCSR_STATUS_PCMCIA1VS 0x000C -#define BCSR_STATUS_SWAPBOOT 0x0040 -#define BCSR_STATUS_FLASHBUSY 0x0100 -#define BCSR_STATUS_IDECBLID 0x0200 -#define BCSR_STATUS_SD0WP 0x0400 -#define BCSR_STATUS_SD1WP 0x0800 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 - -#define BCSR_SWITCHES_OCTAL 0x00FF -#define BCSR_SWITCHES_DIP_1 0x0080 -#define BCSR_SWITCHES_DIP_2 0x0040 -#define BCSR_SWITCHES_DIP_3 0x0020 -#define BCSR_SWITCHES_DIP_4 0x0010 -#define BCSR_SWITCHES_DIP_5 0x0008 -#define BCSR_SWITCHES_DIP_6 0x0004 -#define BCSR_SWITCHES_DIP_7 0x0002 -#define BCSR_SWITCHES_DIP_8 0x0001 -#define BCSR_SWITCHES_ROTARY 0x0F00 - -#define BCSR_RESETS_ETH 0x0001 -#define BCSR_RESETS_CAMERA 0x0002 -#define BCSR_RESETS_DC 0x0004 -#define BCSR_RESETS_IDE 0x0008 -/* not resets but in the same register */ -#define BCSR_RESETS_WSCFSM 0x0800 -#define BCSR_RESETS_PCS0MUX 0x1000 -#define BCSR_RESETS_PCS1MUX 0x2000 -#define BCSR_RESETS_SPISEL 0x4000 -#define BCSR_RESETS_SD1MUX 0x8000 - -#define BCSR_PCMCIA_PC0VPP 0x0003 -#define BCSR_PCMCIA_PC0VCC 0x000C -#define BCSR_PCMCIA_PC0DRVEN 0x0010 -#define BCSR_PCMCIA_PC0RST 0x0080 -#define BCSR_PCMCIA_PC1VPP 0x0300 -#define BCSR_PCMCIA_PC1VCC 0x0C00 -#define BCSR_PCMCIA_PC1DRVEN 0x1000 -#define BCSR_PCMCIA_PC1RST 0x8000 - -#define BCSR_BOARD_LCDVEE 0x0001 -#define BCSR_BOARD_LCDVDD 0x0002 -#define BCSR_BOARD_LCDBL 0x0004 -#define BCSR_BOARD_CAMSNAP 0x0010 -#define BCSR_BOARD_CAMPWR 0x0020 -#define BCSR_BOARD_SD0PWR 0x0040 -#define BCSR_BOARD_SD1PWR 0x0080 - -#define BCSR_LEDS_DECIMALS 0x00FF -#define BCSR_LEDS_LED0 0x0100 -#define BCSR_LEDS_LED1 0x0200 -#define BCSR_LEDS_LED2 0x0400 -#define BCSR_LEDS_LED3 0x0800 - -#define BCSR_SYSTEM_VDDI 0x001F -#define BCSR_SYSTEM_POWEROFF 0x4000 -#define BCSR_SYSTEM_RESET 0x8000 - -/* Bit positions for the different interrupt sources */ -#define BCSR_INT_IDE 0x0001 -#define BCSR_INT_ETH 0x0002 -#define BCSR_INT_PC0 0x0004 -#define BCSR_INT_PC0STSCHG 0x0008 -#define BCSR_INT_PC1 0x0010 -#define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 -#define BCSR_INT_FLASHBUSY 0x0080 -#define BCSR_INT_PC0INSERT 0x0100 -#define BCSR_INT_PC0EJECT 0x0200 -#define BCSR_INT_PC1INSERT 0x0400 -#define BCSR_INT_PC1EJECT 0x0800 -#define BCSR_INT_SD0INSERT 0x1000 -#define BCSR_INT_SD0EJECT 0x2000 -#define BCSR_INT_SD1INSERT 0x4000 -#define BCSR_INT_SD1EJECT 0x8000 - -#define SMC91C111_PHYS_ADDR 0x0D000300 -#define SMC91C111_INT PB1200_ETH_INT - -#define IDE_PHYS_ADDR 0x0C800000 -#define IDE_REG_SHIFT 5 -#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) -#define IDE_INT PB1200_IDE_INT -#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 -#define IDE_RQSIZE 128 - -#define NAND_PHYS_ADDR 0x1C000000 - -/* - * Timing values as described in databook, * ns value stripped of - * lower 2 bits. - * These defines are here rather than an Au1200 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) - -/* - * External Interrupts for Pb1200 as of 8/6/2004. - * Bit positions in the CPLD registers can be calculated by taking - * the interrupt define and subtracting the PB1200_INT_BEGIN value. - * - * Example: IDE bis pos is = 64 - 64 - * ETH bit pos is = 65 - 64 - */ -enum external_pb1200_ints { - PB1200_INT_BEGIN = AU1000_MAX_INTR + 1, - - PB1200_IDE_INT = PB1200_INT_BEGIN, - PB1200_ETH_INT, - PB1200_PC0_INT, - PB1200_PC0_STSCHG_INT, - PB1200_PC1_INT, - PB1200_PC1_STSCHG_INT, - PB1200_DC_INT, - PB1200_FLASHBUSY_INT, - PB1200_PC0_INSERT_INT, - PB1200_PC0_EJECT_INT, - PB1200_PC1_INSERT_INT, - PB1200_PC1_EJECT_INT, - PB1200_SD0_INSERT_INT, - PB1200_SD0_EJECT_INT, - PB1200_SD1_INSERT_INT, - PB1200_SD1_EJECT_INT, - - PB1200_INT_END = PB1200_INT_BEGIN + 15 -}; - -/* - * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c - */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT) \ - ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) - -#define BOARD_PC0_INT PB1200_PC0_INT -#define BOARD_PC1_INT PB1200_PC1_INT -#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) - -/* NAND chip select */ -#define NAND_CS 1 - -#endif /* __ASM_PB1200_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1500.h b/include/asm-mips/mach-pb1x00/pb1500.h deleted file mode 100644 index da51a2eb7b82..000000000000 --- a/include/asm-mips/mach-pb1x00/pb1500.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Alchemy Semi Pb1500 Referrence Board - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1500_H -#define __ASM_PB1500_H - -#define IDENT_BOARD_REG 0xAE000000 -#define BOARD_STATUS_REG 0xAE000004 -#define PCI_BOARD_REG 0xAE000010 -#define PCMCIA_BOARD_REG 0xAE000010 -# define PC_DEASSERT_RST 0x80 -# define PC_DRV_EN 0x10 -#define PB1500_G_CONTROL 0xAE000014 -#define PB1500_RST_VDDI 0xAE00001C -#define PB1500_LEDS 0xAE000018 - -#define PB1500_HEX_LED 0xAF000004 -#define PB1500_HEX_LED_BLANK 0xAF000008 - -/* PCMCIA Pb1500 specific defines */ -#define PCMCIA_MAX_SOCK 0 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) - -#endif /* __ASM_PB1500_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h deleted file mode 100644 index 6704a11497db..000000000000 --- a/include/asm-mips/mach-pb1x00/pb1550.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * AMD Alchemy Semi PB1550 Referrence Board - * Board Registers defines. - * - * Copyright 2004 Embedded Edge LLC. - * Copyright 2005 Ralf Baechle (ralf@linux-mips.org) - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1550_H -#define __ASM_PB1550_H - -#include -#include - -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX - -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define SMBUS_PSC_BASE PSC2_BASE_ADDR -#define I2S_PSC_BASE PSC3_BASE_ADDR - -#define BCSR_PHYS_ADDR 0xAF000000 - -typedef volatile struct -{ - /*00*/ u16 whoami; - u16 reserved0; - /*04*/ u16 status; - u16 reserved1; - /*08*/ u16 switches; - u16 reserved2; - /*0C*/ u16 resets; - u16 reserved3; - /*10*/ u16 pcmcia; - u16 reserved4; - /*14*/ u16 pci; - u16 reserved5; - /*18*/ u16 leds; - u16 reserved6; - /*1C*/ u16 system; - u16 reserved7; - -} BCSR; - -static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; - -/* - * Register bit definitions for the BCSRs - */ -#define BCSR_WHOAMI_DCID 0x000F -#define BCSR_WHOAMI_CPLD 0x00F0 -#define BCSR_WHOAMI_BOARD 0x0F00 - -#define BCSR_STATUS_PCMCIA0VS 0x0003 -#define BCSR_STATUS_PCMCIA1VS 0x000C -#define BCSR_STATUS_PCMCIA0FI 0x0010 -#define BCSR_STATUS_PCMCIA1FI 0x0020 -#define BCSR_STATUS_SWAPBOOT 0x0040 -#define BCSR_STATUS_SRAMWIDTH 0x0080 -#define BCSR_STATUS_FLASHBUSY 0x0100 -#define BCSR_STATUS_ROMBUSY 0x0200 -#define BCSR_STATUS_USBOTGID 0x0800 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 -#define BCSR_STATUS_U3RXD 0x8000 - -#define BCSR_SWITCHES_OCTAL 0x00FF -#define BCSR_SWITCHES_DIP_1 0x0080 -#define BCSR_SWITCHES_DIP_2 0x0040 -#define BCSR_SWITCHES_DIP_3 0x0020 -#define BCSR_SWITCHES_DIP_4 0x0010 -#define BCSR_SWITCHES_DIP_5 0x0008 -#define BCSR_SWITCHES_DIP_6 0x0004 -#define BCSR_SWITCHES_DIP_7 0x0002 -#define BCSR_SWITCHES_DIP_8 0x0001 -#define BCSR_SWITCHES_ROTARY 0x0F00 - -#define BCSR_RESETS_PHY0 0x0001 -#define BCSR_RESETS_PHY1 0x0002 -#define BCSR_RESETS_DC 0x0004 -#define BCSR_RESETS_WSC 0x2000 -#define BCSR_RESETS_SPISEL 0x4000 -#define BCSR_RESETS_DMAREQ 0x8000 - -#define BCSR_PCMCIA_PC0VPP 0x0003 -#define BCSR_PCMCIA_PC0VCC 0x000C -#define BCSR_PCMCIA_PC0DRVEN 0x0010 -#define BCSR_PCMCIA_PC0RST 0x0080 -#define BCSR_PCMCIA_PC1VPP 0x0300 -#define BCSR_PCMCIA_PC1VCC 0x0C00 -#define BCSR_PCMCIA_PC1DRVEN 0x1000 -#define BCSR_PCMCIA_PC1RST 0x8000 - -#define BCSR_PCI_M66EN 0x0001 -#define BCSR_PCI_M33 0x0100 -#define BCSR_PCI_EXTERNARB 0x0200 -#define BCSR_PCI_GPIO200RST 0x0400 -#define BCSR_PCI_CLKOUT 0x0800 -#define BCSR_PCI_CFGHOST 0x1000 - -#define BCSR_LEDS_DECIMALS 0x00FF -#define BCSR_LEDS_LED0 0x0100 -#define BCSR_LEDS_LED1 0x0200 -#define BCSR_LEDS_LED2 0x0400 -#define BCSR_LEDS_LED3 0x0800 - -#define BCSR_SYSTEM_VDDI 0x001F -#define BCSR_SYSTEM_POWEROFF 0x4000 -#define BCSR_SYSTEM_RESET 0x8000 - -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT) \ - ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) - -#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) -#define PB1550_BOTH_BANKS -#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER) -#define PB1550_BOOT_ONLY -#elif !defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) -#define PB1550_USER_ONLY -#endif - -/* - * Timing values as described in databook, * ns value stripped of - * lower 2 bits. - * These defines are here rather than an SOC1550 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) - -#define NAND_CS 1 - -/* Should be done by YAMON */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ - -#endif /* __ASM_PB1550_H */ diff --git a/include/asm-mips/mach-pnx8550/cm.h b/include/asm-mips/mach-pnx8550/cm.h deleted file mode 100644 index bb0a56c7d011..000000000000 --- a/include/asm-mips/mach-pnx8550/cm.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Clock module specific definitions - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ - -#ifndef __PNX8550_CM_H -#define __PNX8550_CM_H - -#define PNX8550_CM_BASE 0xBBE47000 - -#define PNX8550_CM_PLL0_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x000) -#define PNX8550_CM_PLL1_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x004) -#define PNX8550_CM_PLL2_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x008) -#define PNX8550_CM_PLL3_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x00C) - -// Table not complete..... - -#define PNX8550_CM_PLL_BLOCKED_MASK 0x80000000 -#define PNX8550_CM_PLL_LOCK_MASK 0x40000000 -#define PNX8550_CM_PLL_CURRENT_ADJ_MASK 0x3c000000 -#define PNX8550_CM_PLL_N_MASK 0x01ff0000 -#define PNX8550_CM_PLL_M_MASK 0x00003f00 -#define PNX8550_CM_PLL_P_MASK 0x0000000c -#define PNX8550_CM_PLL_PD_MASK 0x00000002 - - -#endif diff --git a/include/asm-mips/mach-pnx8550/glb.h b/include/asm-mips/mach-pnx8550/glb.h deleted file mode 100644 index 07aa85e609bc..000000000000 --- a/include/asm-mips/mach-pnx8550/glb.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * PNX8550 global definitions - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ - -#ifndef __PNX8550_GLB_H -#define __PNX8550_GLB_H - -#define PNX8550_GLB1_BASE 0xBBE63000 -#define PNX8550_GLB2_BASE 0xBBE4d000 -#define PNX8550_RESET_BASE 0xBBE60000 - -/* PCI Inta Output Enable Registers */ -#define PNX8550_GLB2_ENAB_INTA_O *(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050) - -/* Bit 1:Enable DAC Powerdown - 0:DACs are enabled and are working normally - 1:DACs are powerdown -*/ -#define PNX8550_GLB_DAC_PD 0x2 -/* Bit 0:Enable of PCI inta output - 0 = Disable PCI inta output - 1 = Enable PCI inta output -*/ -#define PNX8550_GLB_ENABLE_INTA_O 0x1 - -/* PCI Direct Mappings */ -#define PNX8550_PCIMEM 0x12000000 -#define PNX8550_PCIMEM_SIZE 0x08000000 -#define PNX8550_PCIIO 0x1c000000 -#define PNX8550_PCIIO_SIZE 0x02000000 /* 32M */ - -#define PNX8550_PORT_BASE KSEG1 - -// GPIO def -#define PNX8550_GPIO_BASE 0x1Be00000 - -#define PNX8550_GPIO_DIRQ0 (PNX8550_GPIO_BASE + 0x104500) -#define PNX8550_GPIO_MC1 (PNX8550_GPIO_BASE + 0x104004) -#define PNX8550_GPIO_MC_31_BIT 30 -#define PNX8550_GPIO_MC_30_BIT 28 -#define PNX8550_GPIO_MC_29_BIT 26 -#define PNX8550_GPIO_MC_28_BIT 24 -#define PNX8550_GPIO_MC_27_BIT 22 -#define PNX8550_GPIO_MC_26_BIT 20 -#define PNX8550_GPIO_MC_25_BIT 18 -#define PNX8550_GPIO_MC_24_BIT 16 -#define PNX8550_GPIO_MC_23_BIT 14 -#define PNX8550_GPIO_MC_22_BIT 12 -#define PNX8550_GPIO_MC_21_BIT 10 -#define PNX8550_GPIO_MC_20_BIT 8 -#define PNX8550_GPIO_MC_19_BIT 6 -#define PNX8550_GPIO_MC_18_BIT 4 -#define PNX8550_GPIO_MC_17_BIT 2 -#define PNX8550_GPIO_MC_16_BIT 0 - -#define PNX8550_GPIO_MODE_PRIMOP 0x1 -#define PNX8550_GPIO_MODE_NO_OPENDR 0x2 -#define PNX8550_GPIO_MODE_OPENDR 0x3 - -// RESET module -#define PNX8550_RST_CTL *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0) -#define PNX8550_RST_CAUSE *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4) -#define PNX8550_RST_EN_WATCHDOG *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8) - -#define PNX8550_RST_REL_MIPS_RST_N 0x8 -#define PNX8550_RST_DO_SW_RST 0x4 -#define PNX8550_RST_REL_SYS_RST_OUT 0x2 -#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1 -#endif diff --git a/include/asm-mips/mach-pnx8550/int.h b/include/asm-mips/mach-pnx8550/int.h deleted file mode 100644 index 0e0668b524f4..000000000000 --- a/include/asm-mips/mach-pnx8550/int.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Interrupt specific definitions - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ - -#ifndef __PNX8550_INT_H -#define __PNX8550_INT_H - -#define PNX8550_GIC_BASE 0xBBE3E000 - -#define PNX8550_GIC_PRIMASK_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x000) -#define PNX8550_GIC_PRIMASK_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x004) -#define PNX8550_GIC_VECTOR_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x100) -#define PNX8550_GIC_VECTOR_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x104) -#define PNX8550_GIC_PEND_1_31 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x200) -#define PNX8550_GIC_PEND_32_63 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x204) -#define PNX8550_GIC_PEND_64_70 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x208) -#define PNX8550_GIC_FEATURES *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x300) -#define PNX8550_GIC_REQ(x) *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x400 + (x)*4) -#define PNX8550_GIC_MOD_ID *(volatile unsigned long *)(PNX8550_GIC_BASE + 0xFFC) - -// cp0 is two software + six hw exceptions -#define PNX8550_INT_CP0_TOTINT 8 -#define PNX8550_INT_CP0_MIN 0 -#define PNX8550_INT_CP0_MAX (PNX8550_INT_CP0_MIN + PNX8550_INT_CP0_TOTINT - 1) - -#define MIPS_CPU_GIC_IRQ 2 -#define MIPS_CPU_TIMER_IRQ 7 - -// GIC are 71 exceptions connected to cp0's first hardware exception -#define PNX8550_INT_GIC_TOTINT 71 -#define PNX8550_INT_GIC_MIN (PNX8550_INT_CP0_MAX+1) -#define PNX8550_INT_GIC_MAX (PNX8550_INT_GIC_MIN + PNX8550_INT_GIC_TOTINT - 1) - -#define PNX8550_INT_UNDEF (PNX8550_INT_GIC_MIN+0) -#define PNX8550_INT_IPC_TARGET0_MIPS (PNX8550_INT_GIC_MIN+1) -#define PNX8550_INT_IPC_TARGET1_TM32_1 (PNX8550_INT_GIC_MIN+2) -#define PNX8550_INT_IPC_TARGET1_TM32_2 (PNX8550_INT_GIC_MIN+3) -#define PNX8550_INT_RESERVED_4 (PNX8550_INT_GIC_MIN+4) -#define PNX8550_INT_USB (PNX8550_INT_GIC_MIN+5) -#define PNX8550_INT_GPIO_EQ1 (PNX8550_INT_GIC_MIN+6) -#define PNX8550_INT_GPIO_EQ2 (PNX8550_INT_GIC_MIN+7) -#define PNX8550_INT_GPIO_EQ3 (PNX8550_INT_GIC_MIN+8) -#define PNX8550_INT_GPIO_EQ4 (PNX8550_INT_GIC_MIN+9) - -#define PNX8550_INT_GPIO_EQ5 (PNX8550_INT_GIC_MIN+10) -#define PNX8550_INT_GPIO_EQ6 (PNX8550_INT_GIC_MIN+11) -#define PNX8550_INT_RESERVED_12 (PNX8550_INT_GIC_MIN+12) -#define PNX8550_INT_QVCP1 (PNX8550_INT_GIC_MIN+13) -#define PNX8550_INT_QVCP2 (PNX8550_INT_GIC_MIN+14) -#define PNX8550_INT_I2C1 (PNX8550_INT_GIC_MIN+15) -#define PNX8550_INT_I2C2 (PNX8550_INT_GIC_MIN+16) -#define PNX8550_INT_ISO_UART1 (PNX8550_INT_GIC_MIN+17) -#define PNX8550_INT_ISO_UART2 (PNX8550_INT_GIC_MIN+18) -#define PNX8550_INT_UART1 (PNX8550_INT_GIC_MIN+19) - -#define PNX8550_INT_UART2 (PNX8550_INT_GIC_MIN+20) -#define PNX8550_INT_QNTR (PNX8550_INT_GIC_MIN+21) -#define PNX8550_INT_RESERVED22 (PNX8550_INT_GIC_MIN+22) -#define PNX8550_INT_T_DSC (PNX8550_INT_GIC_MIN+23) -#define PNX8550_INT_M_DSC (PNX8550_INT_GIC_MIN+24) -#define PNX8550_INT_RESERVED25 (PNX8550_INT_GIC_MIN+25) -#define PNX8550_INT_2D_DRAW_ENG (PNX8550_INT_GIC_MIN+26) -#define PNX8550_INT_MEM_BASED_SCALAR1 (PNX8550_INT_GIC_MIN+27) -#define PNX8550_INT_VIDEO_MPEG (PNX8550_INT_GIC_MIN+28) -#define PNX8550_INT_VIDEO_INPUT_P1 (PNX8550_INT_GIC_MIN+29) - -#define PNX8550_INT_VIDEO_INPUT_P2 (PNX8550_INT_GIC_MIN+30) -#define PNX8550_INT_SPDI1 (PNX8550_INT_GIC_MIN+31) -#define PNX8550_INT_SPDO (PNX8550_INT_GIC_MIN+32) -#define PNX8550_INT_AUDIO_INPUT1 (PNX8550_INT_GIC_MIN+33) -#define PNX8550_INT_AUDIO_OUTPUT1 (PNX8550_INT_GIC_MIN+34) -#define PNX8550_INT_AUDIO_INPUT2 (PNX8550_INT_GIC_MIN+35) -#define PNX8550_INT_AUDIO_OUTPUT2 (PNX8550_INT_GIC_MIN+36) -#define PNX8550_INT_MEMBASED_SCALAR2 (PNX8550_INT_GIC_MIN+37) -#define PNX8550_INT_VPK (PNX8550_INT_GIC_MIN+38) -#define PNX8550_INT_MPEG1_MIPS (PNX8550_INT_GIC_MIN+39) - -#define PNX8550_INT_MPEG1_TM (PNX8550_INT_GIC_MIN+40) -#define PNX8550_INT_MPEG2_MIPS (PNX8550_INT_GIC_MIN+41) -#define PNX8550_INT_MPEG2_TM (PNX8550_INT_GIC_MIN+42) -#define PNX8550_INT_TS_DMA (PNX8550_INT_GIC_MIN+43) -#define PNX8550_INT_EDMA (PNX8550_INT_GIC_MIN+44) -#define PNX8550_INT_TM_DEBUG1 (PNX8550_INT_GIC_MIN+45) -#define PNX8550_INT_TM_DEBUG2 (PNX8550_INT_GIC_MIN+46) -#define PNX8550_INT_PCI_INTA (PNX8550_INT_GIC_MIN+47) -#define PNX8550_INT_CLOCK_MODULE (PNX8550_INT_GIC_MIN+48) -#define PNX8550_INT_PCI_XIO_INTA_PCI (PNX8550_INT_GIC_MIN+49) - -#define PNX8550_INT_PCI_XIO_INTB_DMA (PNX8550_INT_GIC_MIN+50) -#define PNX8550_INT_PCI_XIO_INTC_GPPM (PNX8550_INT_GIC_MIN+51) -#define PNX8550_INT_PCI_XIO_INTD_GPXIO (PNX8550_INT_GIC_MIN+52) -#define PNX8550_INT_DVD_CSS (PNX8550_INT_GIC_MIN+53) -#define PNX8550_INT_VLD (PNX8550_INT_GIC_MIN+54) -#define PNX8550_INT_GPIO_TSU_7_0 (PNX8550_INT_GIC_MIN+55) -#define PNX8550_INT_GPIO_TSU_15_8 (PNX8550_INT_GIC_MIN+56) -#define PNX8550_INT_GPIO_CTU_IR (PNX8550_INT_GIC_MIN+57) -#define PNX8550_INT_GPIO0 (PNX8550_INT_GIC_MIN+58) -#define PNX8550_INT_GPIO1 (PNX8550_INT_GIC_MIN+59) - -#define PNX8550_INT_GPIO2 (PNX8550_INT_GIC_MIN+60) -#define PNX8550_INT_GPIO3 (PNX8550_INT_GIC_MIN+61) -#define PNX8550_INT_GPIO4 (PNX8550_INT_GIC_MIN+62) -#define PNX8550_INT_GPIO5 (PNX8550_INT_GIC_MIN+63) -#define PNX8550_INT_GPIO6 (PNX8550_INT_GIC_MIN+64) -#define PNX8550_INT_GPIO7 (PNX8550_INT_GIC_MIN+65) -#define PNX8550_INT_PMAN_SECURITY (PNX8550_INT_GIC_MIN+66) -#define PNX8550_INT_I2C3 (PNX8550_INT_GIC_MIN+67) -#define PNX8550_INT_RESERVED_68 (PNX8550_INT_GIC_MIN+68) -#define PNX8550_INT_SPDI2 (PNX8550_INT_GIC_MIN+69) - -#define PNX8550_INT_I2C4 (PNX8550_INT_GIC_MIN+70) - -// Timer are 3 exceptions connected to cp0's 7th hardware exception -#define PNX8550_INT_TIMER_TOTINT 3 -#define PNX8550_INT_TIMER_MIN (PNX8550_INT_GIC_MAX+1) -#define PNX8550_INT_TIMER_MAX (PNX8550_INT_TIMER_MIN + PNX8550_INT_TIMER_TOTINT - 1) - -#define PNX8550_INT_TIMER1 (PNX8550_INT_TIMER_MIN+0) -#define PNX8550_INT_TIMER2 (PNX8550_INT_TIMER_MIN+1) -#define PNX8550_INT_TIMER3 (PNX8550_INT_TIMER_MIN+2) -#define PNX8550_INT_WATCHDOG PNX8550_INT_TIMER3 - -#endif diff --git a/include/asm-mips/mach-pnx8550/kernel-entry-init.h b/include/asm-mips/mach-pnx8550/kernel-entry-init.h deleted file mode 100644 index bdde00c9199b..000000000000 --- a/include/asm-mips/mach-pnx8550/kernel-entry-init.h +++ /dev/null @@ -1,262 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Embedded Alley Solutions, Inc - */ -#ifndef __ASM_MACH_KERNEL_ENTRY_INIT_H -#define __ASM_MACH_KERNEL_ENTRY_INIT_H - -#include -#include - -#define CO_CONFIGPR_VALID 0x3F1F41FF /* valid bits to write to ConfigPR */ -#define HAZARD_CP0 nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; -#define CACHE_OPC 0xBC000000 /* MIPS cache instruction opcode */ -#define ICACHE_LINE_SIZE 32 /* Instruction cache line size bytes */ -#define DCACHE_LINE_SIZE 32 /* Data cache line size in bytes */ - -#define ICACHE_SET_COUNT 256 /* Instruction cache set count */ -#define DCACHE_SET_COUNT 128 /* Data cache set count */ - -#define ICACHE_SET_SIZE (ICACHE_SET_COUNT * ICACHE_LINE_SIZE) -#define DCACHE_SET_SIZE (DCACHE_SET_COUNT * DCACHE_LINE_SIZE) - - .macro kernel_entry_setup - .set push - .set noreorder - /* - * PNX8550 entry point, when running a non compressed - * kernel. When loading a zImage, the head.S code in - * arch/mips/zboot/pnx8550 will init the caches and, - * decompress the kernel, and branch to kernel_entry. - */ -cache_begin: li t0, (1<<28) - mtc0 t0, CP0_STATUS /* cp0 usable */ - HAZARD_CP0 - - mtc0 zero, CP0_CAUSE - HAZARD_CP0 - - - /* Set static virtual to phys address translation and TLB disabled */ - mfc0 t0, CP0_CONFIG, 7 - HAZARD_CP0 - - and t0, ~((1<<19) | (1<<20)) /* TLB/MAP cleared */ - mtc0 t0, CP0_CONFIG, 7 - HAZARD_CP0 - - /* CPU boots with kseg0 cache algo set to 0x2 -- uncached */ - - init_icache - nop - init_dcache - nop - - cachePr4450ICReset - nop - - cachePr4450DCReset - nop - - /* read ConfigPR into t0 */ - mfc0 t0, CP0_CONFIG, 7 - HAZARD_CP0 - - /* enable the TLB */ - or t0, (1<<19) - - /* disable the ICACHE: at least 10x slower */ - /* or t0, (1<<26) */ - - /* disable the DCACHE; CONFIG_CPU_HAS_LLSC should not be set */ - /* or t0, (1<<27) */ - - and t0, CO_CONFIGPR_VALID - - /* enable TLB. */ - mtc0 t0, CP0_CONFIG, 7 - HAZARD_CP0 -cache_end: - /* Setup CMEM_0 to MMIO address space, 2MB */ - lui t0, 0x1BE0 - addi t0, t0, 0x3 - mtc0 $8, $22, 4 - nop - - /* Setup CMEM_1, 128MB */ - lui t0, 0x1000 - addi t0, t0, 0xf - mtc0 $8, $22, 5 - nop - - - /* Setup CMEM_2, 32MB */ - lui t0, 0x1C00 - addi t0, t0, 0xb - mtc0 $8, $22, 6 - nop - - /* Setup CMEM_3, 0MB */ - lui t0, 0x0 - addi t0, t0, 0x0 - mtc0 $8, $22, 7 - nop - - /* Enable cache */ - mfc0 t0, CP0_CONFIG - HAZARD_CP0 - and t0, t0, 0xFFFFFFF8 - or t0, t0, 3 - mtc0 t0, CP0_CONFIG - HAZARD_CP0 - .set pop - .endm - - .macro init_icache - .set push - .set noreorder - - /* Get Cache Configuration */ - mfc0 t3, CP0_CONFIG, 1 - HAZARD_CP0 - - /* get cache Line size */ - - srl t1, t3, 19 /* C0_CONFIGPR_IL_SHIFT */ - andi t1, t1, 0x7 /* C0_CONFIGPR_IL_MASK */ - beq t1, zero, pr4450_instr_cache_invalidated /* if zero instruction cache is absent */ - nop - addiu t0, t1, 1 - ori t1, zero, 1 - sllv t1, t1, t0 - - /* get max cache Index */ - srl t2, t3, 22 /* C0_CONFIGPR_IS_SHIFT */ - andi t2, t2, 0x7 /* C0_CONFIGPR_IS_MASK */ - addiu t0, t2, 6 - ori t2, zero, 1 - sllv t2, t2, t0 - - /* get max cache way */ - srl t3, t3, 16 /* C0_CONFIGPR_IA_SHIFT */ - andi t3, t3, 0x7 /* C0_CONFIGPR_IA_MASK */ - addiu t3, t3, 1 - - /* total no of cache lines */ - multu t2, t3 /* max index * max way */ - mflo t2 - addiu t2, t2, -1 - - move t0, zero -pr4450_next_instruction_cache_set: - cache Index_Invalidate_I, 0(t0) - addu t0, t0, t1 /* add bytes in a line */ - bne t2, zero, pr4450_next_instruction_cache_set - addiu t2, t2, -1 /* reduce no of lines to invalidate by one */ -pr4450_instr_cache_invalidated: - .set pop - .endm - - .macro init_dcache - .set push - .set noreorder - move t1, zero - - /* Store Tag Information */ - mtc0 zero, CP0_TAGLO, 0 - HAZARD_CP0 - - mtc0 zero, CP0_TAGHI, 0 - HAZARD_CP0 - - /* Cache size is 16384 = 512 lines x 32 bytes per line */ - or t2, zero, (128*4)-1 /* 512 lines */ - /* Invalidate all lines */ -2: - cache Index_Store_Tag_D, 0(t1) - addiu t2, t2, -1 - bne t2, zero, 2b - addiu t1, t1, 32 /* 32 bytes in a line */ - .set pop - .endm - - .macro cachePr4450ICReset - .set push - .set noreorder - - /* Save CP0 status reg on entry; */ - /* disable interrupts during cache reset */ - mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */ - HAZARD_CP0 - - mtc0 zero, CP0_STATUS /* disable CPU interrupts */ - HAZARD_CP0 - - or t1, zero, zero /* T1 = starting cache index (0) */ - ori t2, zero, (256 - 1) /* T2 = inst cache set cnt - 1 */ - - icache_invd_loop: - /* 9 == register t1 */ - .word CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \ - (0 * ICACHE_SET_SIZE) /* invalidate inst cache WAY0 */ - .word CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \ - (1 * ICACHE_SET_SIZE) /* invalidate inst cache WAY1 */ - - addiu t1, t1, ICACHE_LINE_SIZE /* T1 = next cache line index */ - bne t2, zero, icache_invd_loop /* T2 = 0 if all sets invalidated */ - addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */ - - /* Initialize the latches in the instruction cache tag */ - /* that drive the way selection tri-state bus drivers, by doing a */ - /* dummy load while the instruction cache is still disabled. */ - /* TODO: Is this needed ? */ - la t1, KSEG0 /* T1 = cached memory base address */ - lw zero, 0x0000(t1) /* (dummy read of first memory word) */ - - mtc0 t0, CP0_STATUS /* restore interrupt status on entry */ - HAZARD_CP0 - .set pop - .endm - - .macro cachePr4450DCReset - .set push - .set noreorder - mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */ - HAZARD_CP0 - mtc0 zero, CP0_STATUS /* disable CPU interrupts */ - HAZARD_CP0 - - /* Writeback/invalidate entire data cache sets/ways/lines */ - or t1, zero, zero /* T1 = starting cache index (0) */ - ori t2, zero, (DCACHE_SET_COUNT - 1) /* T2 = data cache set cnt - 1 */ - - dcache_wbinvd_loop: - /* 9 == register t1 */ - .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ - (0 * DCACHE_SET_SIZE) /* writeback/invalidate WAY0 */ - .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ - (1 * DCACHE_SET_SIZE) /* writeback/invalidate WAY1 */ - .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ - (2 * DCACHE_SET_SIZE) /* writeback/invalidate WAY2 */ - .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ - (3 * DCACHE_SET_SIZE) /* writeback/invalidate WAY3 */ - - addiu t1, t1, DCACHE_LINE_SIZE /* T1 = next data cache line index */ - bne t2, zero, dcache_wbinvd_loop /* T2 = 0 when wbinvd entire cache */ - addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */ - - /* Initialize the latches in the data cache tag that drive the way - selection tri-state bus drivers, by doing a dummy load while the - data cache is still in the disabled mode. TODO: Is this needed ? */ - la t1, KSEG0 /* T1 = cached memory base address */ - lw zero, 0x0000(t1) /* (dummy read of first memory word) */ - - mtc0 t0, CP0_STATUS /* restore interrupt status on entry */ - HAZARD_CP0 - .set pop - .endm - -#endif /* __ASM_MACH_KERNEL_ENTRY_INIT_H */ diff --git a/include/asm-mips/mach-pnx8550/nand.h b/include/asm-mips/mach-pnx8550/nand.h deleted file mode 100644 index aefbc514ab09..000000000000 --- a/include/asm-mips/mach-pnx8550/nand.h +++ /dev/null @@ -1,121 +0,0 @@ -#ifndef __PNX8550_NAND_H -#define __PNX8550_NAND_H - -#define PNX8550_NAND_BASE_ADDR 0x10000000 -#define PNX8550_PCIXIO_BASE 0xBBE40000 - -#define PNX8550_DMA_EXT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x800) -#define PNX8550_DMA_INT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x804) -#define PNX8550_DMA_TRANS_SIZE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x808) -#define PNX8550_DMA_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x80c) -#define PNX8550_XIO_SEL0 *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x814) -#define PNX8550_GPXIO_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x820) -#define PNX8550_GPXIO_WR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x824) -#define PNX8550_GPXIO_RD *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x828) -#define PNX8550_GPXIO_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x82C) -#define PNX8550_XIO_FLASH_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x830) -#define PNX8550_GPXIO_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb0) -#define PNX8550_GPXIO_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb4) -#define PNX8550_GPXIO_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb8) -#define PNX8550_DMA_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd0) -#define PNX8550_DMA_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd4) -#define PNX8550_DMA_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd8) - -#define PNX8550_XIO_SEL0_EN_16BIT 0x00800000 -#define PNX8550_XIO_SEL0_USE_ACK 0x00400000 -#define PNX8550_XIO_SEL0_REN_HIGH 0x00100000 -#define PNX8550_XIO_SEL0_REN_LOW 0x00040000 -#define PNX8550_XIO_SEL0_WEN_HIGH 0x00010000 -#define PNX8550_XIO_SEL0_WEN_LOW 0x00004000 -#define PNX8550_XIO_SEL0_WAIT 0x00000200 -#define PNX8550_XIO_SEL0_OFFSET 0x00000020 -#define PNX8550_XIO_SEL0_TYPE_68360 0x00000000 -#define PNX8550_XIO_SEL0_TYPE_NOR 0x00000008 -#define PNX8550_XIO_SEL0_TYPE_NAND 0x00000010 -#define PNX8550_XIO_SEL0_TYPE_IDE 0x00000018 -#define PNX8550_XIO_SEL0_SIZE_8MB 0x00000000 -#define PNX8550_XIO_SEL0_SIZE_16MB 0x00000002 -#define PNX8550_XIO_SEL0_SIZE_32MB 0x00000004 -#define PNX8550_XIO_SEL0_SIZE_64MB 0x00000006 -#define PNX8550_XIO_SEL0_ENAB 0x00000001 - -#define PNX8550_SEL0_DEFAULT ((PNX8550_XIO_SEL0_EN_16BIT) | \ - (PNX8550_XIO_SEL0_REN_HIGH*0)| \ - (PNX8550_XIO_SEL0_REN_LOW*2) | \ - (PNX8550_XIO_SEL0_WEN_HIGH*0)| \ - (PNX8550_XIO_SEL0_WEN_LOW*2) | \ - (PNX8550_XIO_SEL0_WAIT*4) | \ - (PNX8550_XIO_SEL0_OFFSET*0) | \ - (PNX8550_XIO_SEL0_TYPE_NAND) | \ - (PNX8550_XIO_SEL0_SIZE_32MB) | \ - (PNX8550_XIO_SEL0_ENAB)) - -#define PNX8550_GPXIO_PENDING 0x00000200 -#define PNX8550_GPXIO_DONE 0x00000100 -#define PNX8550_GPXIO_CLR_DONE 0x00000080 -#define PNX8550_GPXIO_INIT 0x00000040 -#define PNX8550_GPXIO_READ_CMD 0x00000010 -#define PNX8550_GPXIO_BEN 0x0000000F - -#define PNX8550_XIO_FLASH_64MB 0x00200000 -#define PNX8550_XIO_FLASH_INC_DATA 0x00100000 -#define PNX8550_XIO_FLASH_CMD_PH 0x000C0000 -#define PNX8550_XIO_FLASH_CMD_PH2 0x00080000 -#define PNX8550_XIO_FLASH_CMD_PH1 0x00040000 -#define PNX8550_XIO_FLASH_CMD_PH0 0x00000000 -#define PNX8550_XIO_FLASH_ADR_PH 0x00030000 -#define PNX8550_XIO_FLASH_ADR_PH3 0x00030000 -#define PNX8550_XIO_FLASH_ADR_PH2 0x00020000 -#define PNX8550_XIO_FLASH_ADR_PH1 0x00010000 -#define PNX8550_XIO_FLASH_ADR_PH0 0x00000000 -#define PNX8550_XIO_FLASH_CMD_B(x) ((x<<8) & 0x0000FF00) -#define PNX8550_XIO_FLASH_CMD_A(x) (x & 0x000000FF) - -#define PNX8550_XIO_INT_ACK 0x00004000 -#define PNX8550_XIO_INT_COMPL 0x00002000 -#define PNX8550_XIO_INT_NONSUP 0x00000200 -#define PNX8550_XIO_INT_ABORT 0x00000004 - -#define PNX8550_DMA_CTRL_SINGLE_DATA 0x00000400 -#define PNX8550_DMA_CTRL_SND2XIO 0x00000200 -#define PNX8550_DMA_CTRL_FIX_ADDR 0x00000100 -#define PNX8550_DMA_CTRL_BURST_8 0x00000000 -#define PNX8550_DMA_CTRL_BURST_16 0x00000020 -#define PNX8550_DMA_CTRL_BURST_32 0x00000040 -#define PNX8550_DMA_CTRL_BURST_64 0x00000060 -#define PNX8550_DMA_CTRL_BURST_128 0x00000080 -#define PNX8550_DMA_CTRL_BURST_256 0x000000A0 -#define PNX8550_DMA_CTRL_BURST_512 0x000000C0 -#define PNX8550_DMA_CTRL_BURST_NORES 0x000000E0 -#define PNX8550_DMA_CTRL_INIT_DMA 0x00000010 -#define PNX8550_DMA_CTRL_CMD_TYPE 0x0000000F - -/* see PCI system arch, page 100 for the full list: */ -#define PNX8550_DMA_CTRL_PCI_CMD_READ 0x00000006 -#define PNX8550_DMA_CTRL_PCI_CMD_WRITE 0x00000007 - -#define PNX8550_DMA_INT_STAT_ACK_DONE (1<<14) -#define PNX8550_DMA_INT_STAT_DMA_DONE (1<<12) -#define PNX8550_DMA_INT_STAT_DMA_ERR (1<<9) -#define PNX8550_DMA_INT_STAT_PERR5 (1<<5) -#define PNX8550_DMA_INT_STAT_PERR4 (1<<4) -#define PNX8550_DMA_INT_STAT_M_ABORT (1<<2) -#define PNX8550_DMA_INT_STAT_T_ABORT (1<<1) - -#define PNX8550_DMA_INT_EN_ACK_DONE (1<<14) -#define PNX8550_DMA_INT_EN_DMA_DONE (1<<12) -#define PNX8550_DMA_INT_EN_DMA_ERR (1<<9) -#define PNX8550_DMA_INT_EN_PERR5 (1<<5) -#define PNX8550_DMA_INT_EN_PERR4 (1<<4) -#define PNX8550_DMA_INT_EN_M_ABORT (1<<2) -#define PNX8550_DMA_INT_EN_T_ABORT (1<<1) - -#define PNX8550_DMA_INT_CLR_ACK_DONE (1<<14) -#define PNX8550_DMA_INT_CLR_DMA_DONE (1<<12) -#define PNX8550_DMA_INT_CLR_DMA_ERR (1<<9) -#define PNX8550_DMA_INT_CLR_PERR5 (1<<5) -#define PNX8550_DMA_INT_CLR_PERR4 (1<<4) -#define PNX8550_DMA_INT_CLR_M_ABORT (1<<2) -#define PNX8550_DMA_INT_CLR_T_ABORT (1<<1) - -#endif diff --git a/include/asm-mips/mach-pnx8550/pci.h b/include/asm-mips/mach-pnx8550/pci.h deleted file mode 100644 index b921508d701b..000000000000 --- a/include/asm-mips/mach-pnx8550/pci.h +++ /dev/null @@ -1,185 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * PCI specific definitions - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ - -#ifndef __PNX8550_PCI_H -#define __PNX8550_PCI_H - -#include -#include -#include -#include - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -#define PCI_CMD_IOR 0x20 -#define PCI_CMD_IOW 0x30 -#define PCI_CMD_CONFIG_READ 0xa0 -#define PCI_CMD_CONFIG_WRITE 0xb0 - -#define PCI_IO_TIMEOUT 1000 -#define PCI_IO_RETRY 5 -/* Timeout for IO and CFG accesses. - This is in 1/1024 th of a jiffie(=10ms) - i.e. approx 10us */ -#define PCI_IO_JIFFIES_TIMEOUT 40 -#define PCI_IO_JIFFIES_SHIFT 10 - -#define PCI_BYTE_ENABLE_MASK 0x0000000f -#define PCI_CFG_BUS_SHIFT 16 -#define PCI_CFG_FUNC_SHIFT 8 -#define PCI_CFG_REG_SHIFT 2 - -#define PCI_BASE 0x1be00000 -#define PCI_SETUP 0x00040010 -#define PCI_DIS_REQGNT (1<<30) -#define PCI_DIS_REQGNTA (1<<29) -#define PCI_DIS_REQGNTB (1<<28) -#define PCI_D2_SUPPORT (1<<27) -#define PCI_D1_SUPPORT (1<<26) -#define PCI_EN_TA (1<<24) -#define PCI_EN_PCI2MMI (1<<23) -#define PCI_EN_XIO (1<<22) -#define PCI_BASE18_PREF (1<<21) -#define SIZE_16M 0x3 -#define SIZE_32M 0x4 -#define SIZE_64M 0x5 -#define SIZE_128M 0x6 -#define PCI_SETUP_BASE18_SIZE(X) (X<<18) -#define PCI_SETUP_BASE18_EN (1<<17) -#define PCI_SETUP_BASE14_PREF (1<<16) -#define PCI_SETUP_BASE14_SIZE(X) (X<<12) -#define PCI_SETUP_BASE14_EN (1<<11) -#define PCI_SETUP_BASE10_PREF (1<<10) -#define PCI_SETUP_BASE10_SIZE(X) (X<<7) -#define PCI_SETUP_CFGMANAGE_EN (1<<1) -#define PCI_SETUP_PCIARB_EN (1<<0) - -#define PCI_CTRL 0x040014 -#define PCI_SWPB_DCS_PCI (1<<16) -#define PCI_SWPB_PCI_PCI (1<<15) -#define PCI_SWPB_PCI_DCS (1<<14) -#define PCI_REG_WR_POST (1<<13) -#define PCI_XIO_WR_POST (1<<12) -#define PCI_PCI2_WR_POST (1<<13) -#define PCI_PCI1_WR_POST (1<<12) -#define PCI_SERR_SEEN (1<<11) -#define PCI_B10_SPEC_RD (1<<6) -#define PCI_B14_SPEC_RD (1<<5) -#define PCI_B18_SPEC_RD (1<<4) -#define PCI_B10_NOSUBWORD (1<<3) -#define PCI_B14_NOSUBWORD (1<<2) -#define PCI_B18_NOSUBWORD (1<<1) -#define PCI_RETRY_TMREN (1<<0) - -#define PCI_BASE1_LO 0x040018 -#define PCI_BASE1_HI 0x04001C -#define PCI_BASE2_LO 0x040020 -#define PCI_BASE2_HI 0x040024 -#define PCI_RDLIFETIM 0x040028 -#define PCI_GPPM_ADDR 0x04002C -#define PCI_GPPM_WDAT 0x040030 -#define PCI_GPPM_RDAT 0x040034 -#define PCI_GPPM_CTRL 0x040038 -#define GPPM_DONE (1<<10) -#define INIT_PCI_CYCLE (1<<9) -#define GPPM_CMD(X) (((X)&0xf)<<4) -#define GPPM_BYTEEN(X) ((X)&0xf) -#define PCI_UNLOCKREG 0x04003C -#define UNLOCK_SSID(X) (((X)&0xff)<<8) -#define UNLOCK_SETUP(X) (((X)&0xff)<<0) -#define UNLOCK_MAGIC 0xCA -#define PCI_DEV_VEND_ID 0x040040 -#define DEVICE_ID(X) (((X)>>16)&0xffff) -#define VENDOR_ID(X) (((X)&0xffff)) -#define PCI_CFG_CMDSTAT 0x040044 -#define PCI_CFG_STATUS(X) (((X)>>16)&0xffff) -#define PCI_CFG_COMMAND(X) ((X)&0xffff) -#define PCI_CLASS_REV 0x040048 -#define PCI_CLASSCODE(X) (((X)>>8)&0xffffff) -#define PCI_REVID(X) ((X)&0xff) -#define PCI_LAT_TMR 0x04004c -#define PCI_BASE10 0x040050 -#define PCI_BASE14 0x040054 -#define PCI_BASE18 0x040058 -#define PCI_SUBSYS_ID 0x04006c -#define PCI_CAP_PTR 0x040074 -#define PCI_CFG_MISC 0x04007c -#define PCI_PMC 0x040080 -#define PCI_PWR_STATE 0x040084 -#define PCI_IO 0x040088 -#define PCI_SLVTUNING 0x04008C -#define PCI_DMATUNING 0x040090 -#define PCI_DMAEADDR 0x040800 -#define PCI_DMAIADDR 0x040804 -#define PCI_DMALEN 0x040808 -#define PCI_DMACTRL 0x04080C -#define PCI_XIOCTRL 0x040810 -#define PCI_SEL0PROF 0x040814 -#define PCI_SEL1PROF 0x040818 -#define PCI_SEL2PROF 0x04081C -#define PCI_GPXIOADDR 0x040820 -#define PCI_NANDCTRLS 0x400830 -#define PCI_SEL3PROF 0x040834 -#define PCI_SEL4PROF 0x040838 -#define PCI_GPXIO_STAT 0x040FB0 -#define PCI_GPXIO_IMASK 0x040FB4 -#define PCI_GPXIO_ICLR 0x040FB8 -#define PCI_GPXIO_ISET 0x040FBC -#define PCI_GPPM_STATUS 0x040FC0 -#define GPPM_DONE (1<<10) -#define GPPM_ERR (1<<9) -#define GPPM_MPAR_ERR (1<<8) -#define GPPM_PAR_ERR (1<<7) -#define GPPM_R_MABORT (1<<2) -#define GPPM_R_TABORT (1<<1) -#define PCI_GPPM_IMASK 0x040FC4 -#define PCI_GPPM_ICLR 0x040FC8 -#define PCI_GPPM_ISET 0x040FCC -#define PCI_DMA_STATUS 0x040FD0 -#define PCI_DMA_IMASK 0x040FD4 -#define PCI_DMA_ICLR 0x040FD8 -#define PCI_DMA_ISET 0x040FDC -#define PCI_ISTATUS 0x040FE0 -#define PCI_IMASK 0x040FE4 -#define PCI_ICLR 0x040FE8 -#define PCI_ISET 0x040FEC -#define PCI_MOD_ID 0x040FFC - -/* - * PCI configuration cycle AD bus definition - */ -/* Type 0 */ -#define PCI_CFG_TYPE0_REG_SHF 0 -#define PCI_CFG_TYPE0_FUNC_SHF 8 - -/* Type 1 */ -#define PCI_CFG_TYPE1_REG_SHF 0 -#define PCI_CFG_TYPE1_FUNC_SHF 8 -#define PCI_CFG_TYPE1_DEV_SHF 11 -#define PCI_CFG_TYPE1_BUS_SHF 16 - -/* - * Ethernet device DP83816 definition - */ -#define DP83816_IRQ_ETHER 66 - -#endif diff --git a/include/asm-mips/mach-pnx8550/uart.h b/include/asm-mips/mach-pnx8550/uart.h deleted file mode 100644 index ad7608d44874..000000000000 --- a/include/asm-mips/mach-pnx8550/uart.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __IP3106_UART_H -#define __IP3106_UART_H - -#include - -/* early macros for kgdb use. fixme: clean this up */ - -#define UART_BASE 0xbbe4a000 /* PNX8550 */ - -#define PNX8550_UART_PORT0 (UART_BASE) -#define PNX8550_UART_PORT1 (UART_BASE + 0x1000) - -#define PNX8550_UART_INT(x) (PNX8550_INT_GIC_MIN+19+x) -#define IRQ_TO_UART(x) (x-PNX8550_INT_GIC_MIN-19) - -/* early macros needed for prom/kgdb */ - -#define ip3106_lcr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x000) -#define ip3106_mcr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x004) -#define ip3106_baud(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x008) -#define ip3106_cfg(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x00C) -#define ip3106_fifo(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x028) -#define ip3106_istat(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE0) -#define ip3106_ien(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE4) -#define ip3106_iclr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE8) -#define ip3106_iset(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFEC) -#define ip3106_pd(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFF4) -#define ip3106_mid(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFFC) - -#endif diff --git a/include/asm-mips/mach-pnx8550/usb.h b/include/asm-mips/mach-pnx8550/usb.h deleted file mode 100644 index 483b7fc65d41..000000000000 --- a/include/asm-mips/mach-pnx8550/usb.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * USB specific definitions - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ - -#ifndef __PNX8550_USB_H -#define __PNX8550_USB_H - -/* - * USB Host controller - */ - -#define PNX8550_USB_OHCI_OP_BASE 0x1be48000 -#define PNX8550_USB_OHCI_OP_LEN 0x1000 - -#endif diff --git a/include/asm-mips/mach-pnx8550/war.h b/include/asm-mips/mach-pnx8550/war.h deleted file mode 100644 index d0458dd082f9..000000000000 --- a/include/asm-mips/mach-pnx8550/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_PNX8550_WAR_H -#define __ASM_MIPS_MACH_PNX8550_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */ diff --git a/include/asm-mips/mach-rc32434/cpu-feature-overrides.h b/include/asm-mips/mach-rc32434/cpu-feature-overrides.h deleted file mode 100644 index f3bc7efa2608..000000000000 --- a/include/asm-mips/mach-rc32434/cpu-feature-overrides.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * IDT RC32434 specific CPU feature overrides - * - * Copyright (C) 2008 Florian Fainelli - * - * This file was derived from: include/asm-mips/cpu-features.h - * Copyright (C) 2003, 2004 Ralf Baechle - * Copyright (C) 2004 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ -#ifndef __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H - -/* - * The IDT RC32434 SOC has a built-in MIPS 4Kc core. - */ -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_3k_cache 0 -#define cpu_has_4k_cache 1 -#define cpu_has_tx39_cache 0 -#define cpu_has_sb1_cache 0 -#define cpu_has_fpu 0 -#define cpu_has_32fpr 0 -#define cpu_has_counter 1 -#define cpu_has_watch 1 -#define cpu_has_divec 1 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 1 -#define cpu_has_ejtag 1 -#define cpu_has_llsc 1 - -#define cpu_has_mips16 0 -#define cpu_has_mdmx 0 -#define cpu_has_mips3d 0 -#define cpu_has_smartmips 0 - -#define cpu_has_vtag_icache 0 -/* #define cpu_has_dc_aliases ? */ -/* #define cpu_has_ic_fills_f_dc ? */ -/* #define cpu_has_pindexed_dcache ? */ - -/* #define cpu_icache_snoops_remote_store ? */ - -#define cpu_has_mips32r1 1 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 - -/* #define cpu_has_nofpuex ? */ -#define cpu_has_64bits 0 -#define cpu_has_64bit_zero_reg 0 -#define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 - -#define cpu_has_inclusive_pcaches 0 - -#define cpu_dcache_line_size() 16 -#define cpu_icache_line_size() 16 - -#endif /* __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-rc32434/ddr.h b/include/asm-mips/mach-rc32434/ddr.h deleted file mode 100644 index 291e2cf9dde0..000000000000 --- a/include/asm-mips/mach-rc32434/ddr.h +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Definitions for the DDR registers - * - * Copyright 2002 Ryan Holm - * Copyright 2008 Florian Fainelli - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef _ASM_RC32434_DDR_H_ -#define _ASM_RC32434_DDR_H_ - -#include - -/* DDR register structure */ -struct ddr_ram { - u32 ddrbase; - u32 ddrmask; - u32 res1; - u32 res2; - u32 ddrc; - u32 ddrabase; - u32 ddramask; - u32 ddramap; - u32 ddrcust; - u32 ddrrdc; - u32 ddrspare; -}; - -#define DDR0_PHYS_ADDR 0x18018000 - -/* DDR banks masks */ -#define DDR_MASK 0xffff0000 -#define DDR0_BASE_MSK DDR_MASK -#define DDR1_BASE_MSK DDR_MASK - -/* DDR bank0 registers */ -#define RC32434_DDR0_ATA_BIT 5 -#define RC32434_DDR0_ATA_MSK 0x000000E0 -#define RC32434_DDR0_DBW_BIT 8 -#define RC32434_DDR0_DBW_MSK 0x00000100 -#define RC32434_DDR0_WR_BIT 9 -#define RC32434_DDR0_WR_MSK 0x00000600 -#define RC32434_DDR0_PS_BIT 11 -#define RC32434_DDR0_PS_MSK 0x00001800 -#define RC32434_DDR0_DTYPE_BIT 13 -#define RC32434_DDR0_DTYPE_MSK 0x0000e000 -#define RC32434_DDR0_RFC_BIT 16 -#define RC32434_DDR0_RFC_MSK 0x000f0000 -#define RC32434_DDR0_RP_BIT 20 -#define RC32434_DDR0_RP_MSK 0x00300000 -#define RC32434_DDR0_AP_BIT 22 -#define RC32434_DDR0_AP_MSK 0x00400000 -#define RC32434_DDR0_RCD_BIT 23 -#define RC32434_DDR0_RCD_MSK 0x01800000 -#define RC32434_DDR0_CL_BIT 25 -#define RC32434_DDR0_CL_MSK 0x06000000 -#define RC32434_DDR0_DBM_BIT 27 -#define RC32434_DDR0_DBM_MSK 0x08000000 -#define RC32434_DDR0_SDS_BIT 28 -#define RC32434_DDR0_SDS_MSK 0x10000000 -#define RC32434_DDR0_ATP_BIT 29 -#define RC32434_DDR0_ATP_MSK 0x60000000 -#define RC32434_DDR0_RE_BIT 31 -#define RC32434_DDR0_RE_MSK 0x80000000 - -/* DDR bank C registers */ -#define RC32434_DDRC_MSK(x) BIT_TO_MASK(x) -#define RC32434_DDRC_CES_BIT 0 -#define RC32434_DDRC_ACE_BIT 1 - -/* Custom DDR bank registers */ -#define RC32434_DCST_MSK(x) BIT_TO_MASK(x) -#define RC32434_DCST_CS_BIT 0 -#define RC32434_DCST_CS_MSK 0x00000003 -#define RC32434_DCST_WE_BIT 2 -#define RC32434_DCST_RAS_BIT 3 -#define RC32434_DCST_CAS_BIT 4 -#define RC32434_DSCT_CKE_BIT 5 -#define RC32434_DSCT_BA_BIT 6 -#define RC32434_DSCT_BA_MSK 0x000000c0 - -/* DDR QSC registers */ -#define RC32434_QSC_DM_BIT 0 -#define RC32434_QSC_DM_MSK 0x00000003 -#define RC32434_QSC_DQSBS_BIT 2 -#define RC32434_QSC_DQSBS_MSK 0x000000fc -#define RC32434_QSC_DB_BIT 8 -#define RC32434_QSC_DB_MSK 0x00000100 -#define RC32434_QSC_DBSP_BIT 9 -#define RC32434_QSC_DBSP_MSK 0x01fffe00 -#define RC32434_QSC_BDP_BIT 25 -#define RC32434_QSC_BDP_MSK 0x7e000000 - -/* DDR LLC registers */ -#define RC32434_LLC_EAO_BIT 0 -#define RC32434_LLC_EAO_MSK 0x00000001 -#define RC32434_LLC_EO_BIT 1 -#define RC32434_LLC_EO_MSK 0x0000003e -#define RC32434_LLC_FS_BIT 6 -#define RC32434_LLC_FS_MSK 0x000000c0 -#define RC32434_LLC_AS_BIT 8 -#define RC32434_LLC_AS_MSK 0x00000700 -#define RC32434_LLC_SP_BIT 11 -#define RC32434_LLC_SP_MSK 0x001ff800 - -/* DDR LLFC registers */ -#define RC32434_LLFC_MSK(x) BIT_TO_MASK(x) -#define RC32434_LLFC_MEN_BIT 0 -#define RC32434_LLFC_EAN_BIT 1 -#define RC32434_LLFC_FF_BIT 2 - -/* DDR DLLTA registers */ -#define RC32434_DLLTA_ADDR_BIT 2 -#define RC32434_DLLTA_ADDR_MSK 0xfffffffc - -/* DDR DLLED registers */ -#define RC32434_DLLED_MSK(x) BIT_TO_MASK(x) -#define RC32434_DLLED_DBE_BIT 0 -#define RC32434_DLLED_DTE_BIT 1 - -#endif /* _ASM_RC32434_DDR_H_ */ diff --git a/include/asm-mips/mach-rc32434/dma.h b/include/asm-mips/mach-rc32434/dma.h deleted file mode 100644 index 5f898b5873f7..000000000000 --- a/include/asm-mips/mach-rc32434/dma.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright 2002 Integrated Device Technology, Inc. - * All rights reserved. - * - * DMA register definition. - * - * Author : ryan.holmQVist@idt.com - * Date : 20011005 - */ - -#ifndef __ASM_RC32434_DMA_H -#define __ASM_RC32434_DMA_H - -#include - -#define DMA0_BASE_ADDR 0x18040000 - -/* - * DMA descriptor (in physical memory). - */ - -struct dma_desc { - u32 control; /* Control. use DMAD_* */ - u32 ca; /* Current Address. */ - u32 devcs; /* Device control and status. */ - u32 link; /* Next descriptor in chain. */ -}; - -#define DMA_DESC_SIZ sizeof(struct dma_desc) -#define DMA_DESC_COUNT_BIT 0 -#define DMA_DESC_COUNT_MSK 0x0003ffff -#define DMA_DESC_DS_BIT 20 -#define DMA_DESC_DS_MSK 0x00300000 - -#define DMA_DESC_DEV_CMD_BIT 22 -#define DMA_DESC_DEV_CMD_MSK 0x01c00000 - -/* DMA command sizes */ -#define DMA_DESC_DEV_CMD_BYTE 0 -#define DMA_DESC_DEV_CMD_HLF_WD 1 -#define DMA_DESC_DEV_CMD_WORD 2 -#define DMA_DESC_DEV_CMD_2WORDS 3 -#define DMA_DESC_DEV_CMD_4WORDS 4 -#define DMA_DESC_DEV_CMD_6WORDS 5 -#define DMA_DESC_DEV_CMD_8WORDS 6 -#define DMA_DESC_DEV_CMD_16WORDS 7 - -/* DMA descriptors interrupts */ -#define DMA_DESC_COF (1 << 25) /* Chain on finished */ -#define DMA_DESC_COD (1 << 26) /* Chain on done */ -#define DMA_DESC_IOF (1 << 27) /* Interrupt on finished */ -#define DMA_DESC_IOD (1 << 28) /* Interrupt on done */ -#define DMA_DESC_TERM (1 << 29) /* Terminated */ -#define DMA_DESC_DONE (1 << 30) /* Done */ -#define DMA_DESC_FINI (1 << 31) /* Finished */ - -/* - * DMA register (within Internal Register Map). - */ - -struct dma_reg { - u32 dmac; /* Control. */ - u32 dmas; /* Status. */ - u32 dmasm; /* Mask. */ - u32 dmadptr; /* Descriptor pointer. */ - u32 dmandptr; /* Next descriptor pointer. */ -}; - -/* DMA channels specific registers */ -#define DMA_CHAN_RUN_BIT (1 << 0) -#define DMA_CHAN_DONE_BIT (1 << 1) -#define DMA_CHAN_MODE_BIT (1 << 2) -#define DMA_CHAN_MODE_MSK 0x0000000c -#define DMA_CHAN_MODE_AUTO 0 -#define DMA_CHAN_MODE_BURST 1 -#define DMA_CHAN_MODE_XFRT 2 -#define DMA_CHAN_MODE_RSVD 3 -#define DMA_CHAN_ACT_BIT (1 << 4) - -/* DMA status registers */ -#define DMA_STAT_FINI (1 << 0) -#define DMA_STAT_DONE (1 << 1) -#define DMA_STAT_CHAIN (1 << 2) -#define DMA_STAT_ERR (1 << 3) -#define DMA_STAT_HALT (1 << 4) - -/* - * DMA channel definitions - */ - -#define DMA_CHAN_ETH_RCV 0 -#define DMA_CHAN_ETH_XMT 1 -#define DMA_CHAN_MEM_TO_FIFO 2 -#define DMA_CHAN_FIFO_TO_MEM 3 -#define DMA_CHAN_PCI_TO_MEM 4 -#define DMA_CHAN_MEM_TO_PCI 5 -#define DMA_CHAN_COUNT 6 - -struct dma_channel { - struct dma_reg ch[DMA_CHAN_COUNT]; -}; - -#endif /* __ASM_RC32434_DMA_H */ diff --git a/include/asm-mips/mach-rc32434/dma_v.h b/include/asm-mips/mach-rc32434/dma_v.h deleted file mode 100644 index 173a9f9146cd..000000000000 --- a/include/asm-mips/mach-rc32434/dma_v.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2002 Integrated Device Technology, Inc. - * All rights reserved. - * - * DMA register definition. - * - * Author : ryan.holmQVist@idt.com - * Date : 20011005 - */ - -#ifndef _ASM_RC32434_DMA_V_H_ -#define _ASM_RC32434_DMA_V_H_ - -#include -#include - -#define DMA_CHAN_OFFSET 0x14 -#define IS_DMA_USED(X) (((X) & \ - (DMA_DESC_FINI | DMA_DESC_DONE | DMA_DESC_TERM)) \ - != 0) -#define DMA_COUNT(count) ((count) & DMA_DESC_COUNT_MSK) - -#define DMA_HALT_TIMEOUT 500 - -static inline int rc32434_halt_dma(struct dma_reg *ch) -{ - int timeout = 1; - if (__raw_readl(&ch->dmac) & DMA_CHAN_RUN_BIT) { - __raw_writel(0, &ch->dmac); - for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) { - if (__raw_readl(&ch->dmas) & DMA_STAT_HALT) { - __raw_writel(0, &ch->dmas); - break; - } - } - } - - return timeout ? 0 : 1; -} - -static inline void rc32434_start_dma(struct dma_reg *ch, u32 dma_addr) -{ - __raw_writel(0, &ch->dmandptr); - __raw_writel(dma_addr, &ch->dmadptr); -} - -static inline void rc32434_chain_dma(struct dma_reg *ch, u32 dma_addr) -{ - __raw_writel(dma_addr, &ch->dmandptr); -} - -#endif /* _ASM_RC32434_DMA_V_H_ */ diff --git a/include/asm-mips/mach-rc32434/eth.h b/include/asm-mips/mach-rc32434/eth.h deleted file mode 100644 index a25cbc56173d..000000000000 --- a/include/asm-mips/mach-rc32434/eth.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Definitions for the Ethernet registers - * - * Copyright 2002 Allend Stichter - * Copyright 2008 Florian Fainelli - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef __ASM_RC32434_ETH_H -#define __ASM_RC32434_ETH_H - - -#define ETH0_BASE_ADDR 0x18060000 - -struct eth_regs { - u32 ethintfc; - u32 ethfifott; - u32 etharc; - u32 ethhash0; - u32 ethhash1; - u32 ethu0[4]; /* Reserved. */ - u32 ethpfs; - u32 ethmcp; - u32 eth_u1[10]; /* Reserved. */ - u32 ethspare; - u32 eth_u2[42]; /* Reserved. */ - u32 ethsal0; - u32 ethsah0; - u32 ethsal1; - u32 ethsah1; - u32 ethsal2; - u32 ethsah2; - u32 ethsal3; - u32 ethsah3; - u32 ethrbc; - u32 ethrpc; - u32 ethrupc; - u32 ethrfc; - u32 ethtbc; - u32 ethgpf; - u32 eth_u9[50]; /* Reserved. */ - u32 ethmac1; - u32 ethmac2; - u32 ethipgt; - u32 ethipgr; - u32 ethclrt; - u32 ethmaxf; - u32 eth_u10; /* Reserved. */ - u32 ethmtest; - u32 miimcfg; - u32 miimcmd; - u32 miimaddr; - u32 miimwtd; - u32 miimrdd; - u32 miimind; - u32 eth_u11; /* Reserved. */ - u32 eth_u12; /* Reserved. */ - u32 ethcfsa0; - u32 ethcfsa1; - u32 ethcfsa2; -}; - -/* Ethernet interrupt registers */ -#define ETH_INT_FC_EN (1 << 0) -#define ETH_INT_FC_ITS (1 << 1) -#define ETH_INT_FC_RIP (1 << 2) -#define ETH_INT_FC_JAM (1 << 3) -#define ETH_INT_FC_OVR (1 << 4) -#define ETH_INT_FC_UND (1 << 5) -#define ETH_INT_FC_IOC 0x000000c0 - -/* Ethernet FIFO registers */ -#define ETH_FIFI_TT_TTH_BIT 0 -#define ETH_FIFO_TT_TTH 0x0000007f - -/* Ethernet ARC/multicast registers */ -#define ETH_ARC_PRO (1 << 0) -#define ETH_ARC_AM (1 << 1) -#define ETH_ARC_AFM (1 << 2) -#define ETH_ARC_AB (1 << 3) - -/* Ethernet SAL registers */ -#define ETH_SAL_BYTE_5 0x000000ff -#define ETH_SAL_BYTE_4 0x0000ff00 -#define ETH_SAL_BYTE_3 0x00ff0000 -#define ETH_SAL_BYTE_2 0xff000000 - -/* Ethernet SAH registers */ -#define ETH_SAH_BYTE1 0x000000ff -#define ETH_SAH_BYTE0 0x0000ff00 - -/* Ethernet GPF register */ -#define ETH_GPF_PTV 0x0000ffff - -/* Ethernet PFG register */ -#define ETH_PFS_PFD (1 << 0) - -/* Ethernet CFSA[0-3] registers */ -#define ETH_CFSA0_CFSA4 0x000000ff -#define ETH_CFSA0_CFSA5 0x0000ff00 -#define ETH_CFSA1_CFSA2 0x000000ff -#define ETH_CFSA1_CFSA3 0x0000ff00 -#define ETH_CFSA1_CFSA0 0x000000ff -#define ETH_CFSA1_CFSA1 0x0000ff00 - -/* Ethernet MAC1 registers */ -#define ETH_MAC1_RE (1 << 0) -#define ETH_MAC1_PAF (1 << 1) -#define ETH_MAC1_RFC (1 << 2) -#define ETH_MAC1_TFC (1 << 3) -#define ETH_MAC1_LB (1 << 4) -#define ETH_MAC1_MR (1 << 31) - -/* Ethernet MAC2 registers */ -#define ETH_MAC2_FD (1 << 0) -#define ETH_MAC2_FLC (1 << 1) -#define ETH_MAC2_HFE (1 << 2) -#define ETH_MAC2_DC (1 << 3) -#define ETH_MAC2_CEN (1 << 4) -#define ETH_MAC2_PE (1 << 5) -#define ETH_MAC2_VPE (1 << 6) -#define ETH_MAC2_APE (1 << 7) -#define ETH_MAC2_PPE (1 << 8) -#define ETH_MAC2_LPE (1 << 9) -#define ETH_MAC2_NB (1 << 12) -#define ETH_MAC2_BP (1 << 13) -#define ETH_MAC2_ED (1 << 14) - -/* Ethernet IPGT register */ -#define ETH_IPGT 0x0000007f - -/* Ethernet IPGR registers */ -#define ETH_IPGR_IPGR2 0x0000007f -#define ETH_IPGR_IPGR1 0x00007f00 - -/* Ethernet CLRT registers */ -#define ETH_CLRT_MAX_RET 0x0000000f -#define ETH_CLRT_COL_WIN 0x00003f00 - -/* Ethernet MAXF register */ -#define ETH_MAXF 0x0000ffff - -/* Ethernet test registers */ -#define ETH_TEST_REG (1 << 2) -#define ETH_MCP_DIV 0x000000ff - -/* MII registers */ -#define ETH_MII_CFG_RSVD 0x0000000c -#define ETH_MII_CMD_RD (1 << 0) -#define ETH_MII_CMD_SCN (1 << 1) -#define ETH_MII_REG_ADDR 0x0000001f -#define ETH_MII_PHY_ADDR 0x00001f00 -#define ETH_MII_WTD_DATA 0x0000ffff -#define ETH_MII_RDD_DATA 0x0000ffff -#define ETH_MII_IND_BSY (1 << 0) -#define ETH_MII_IND_SCN (1 << 1) -#define ETH_MII_IND_NV (1 << 2) - -/* - * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors. - */ - -#define ETH_RX_FD (1 << 0) -#define ETH_RX_LD (1 << 1) -#define ETH_RX_ROK (1 << 2) -#define ETH_RX_FM (1 << 3) -#define ETH_RX_MP (1 << 4) -#define ETH_RX_BP (1 << 5) -#define ETH_RX_VLT (1 << 6) -#define ETH_RX_CF (1 << 7) -#define ETH_RX_OVR (1 << 8) -#define ETH_RX_CRC (1 << 9) -#define ETH_RX_CV (1 << 10) -#define ETH_RX_DB (1 << 11) -#define ETH_RX_LE (1 << 12) -#define ETH_RX_LOR (1 << 13) -#define ETH_RX_CES (1 << 14) -#define ETH_RX_LEN_BIT 16 -#define ETH_RX_LEN 0xffff0000 - -#define ETH_TX_FD (1 << 0) -#define ETH_TX_LD (1 << 1) -#define ETH_TX_OEN (1 << 2) -#define ETH_TX_PEN (1 << 3) -#define ETH_TX_CEN (1 << 4) -#define ETH_TX_HEN (1 << 5) -#define ETH_TX_TOK (1 << 6) -#define ETH_TX_MP (1 << 7) -#define ETH_TX_BP (1 << 8) -#define ETH_TX_UND (1 << 9) -#define ETH_TX_OF (1 << 10) -#define ETH_TX_ED (1 << 11) -#define ETH_TX_EC (1 << 12) -#define ETH_TX_LC (1 << 13) -#define ETH_TX_TD (1 << 14) -#define ETH_TX_CRC (1 << 15) -#define ETH_TX_LE (1 << 16) -#define ETH_TX_CC 0x001E0000 - -#endif /* __ASM_RC32434_ETH_H */ diff --git a/include/asm-mips/mach-rc32434/gpio.h b/include/asm-mips/mach-rc32434/gpio.h deleted file mode 100644 index 3a70b41cd7a5..000000000000 --- a/include/asm-mips/mach-rc32434/gpio.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright 2002 Integrated Device Technology, Inc. - * All rights reserved. - * - * GPIO register definition. - * - * Author : ryan.holmQVist@idt.com - * Date : 20011005 - * Copyright (C) 2001, 2002 Ryan Holm - * Copyright (C) 2008 Florian Fainelli - */ - -#ifndef _RC32434_GPIO_H_ -#define _RC32434_GPIO_H_ - -#include - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value - -#define gpio_cansleep __gpio_cansleep - -#define gpio_to_irq(gpio) IRQ_GPIO(gpio) -#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) - -#include - -struct rb532_gpio_reg { - u32 gpiofunc; /* GPIO Function Register - * gpiofunc[x]==0 bit = gpio - * func[x]==1 bit = altfunc - */ - u32 gpiocfg; /* GPIO Configuration Register - * gpiocfg[x]==0 bit = input - * gpiocfg[x]==1 bit = output - */ - u32 gpiod; /* GPIO Data Register - * gpiod[x] read/write gpio pinX status - */ - u32 gpioilevel; /* GPIO Interrupt Status Register - * interrupt level (see gpioistat) - */ - u32 gpioistat; /* Gpio Interrupt Status Register - * istat[x] = (gpiod[x] == level[x]) - * cleared in ISR (STICKY bits) - */ - u32 gpionmien; /* GPIO Non-maskable Interrupt Enable Register */ -}; - -/* UART GPIO signals */ -#define RC32434_UART0_SOUT (1 << 0) -#define RC32434_UART0_SIN (1 << 1) -#define RC32434_UART0_RTS (1 << 2) -#define RC32434_UART0_CTS (1 << 3) - -/* M & P bus GPIO signals */ -#define RC32434_MP_BIT_22 (1 << 4) -#define RC32434_MP_BIT_23 (1 << 5) -#define RC32434_MP_BIT_24 (1 << 6) -#define RC32434_MP_BIT_25 (1 << 7) - -/* CPU GPIO signals */ -#define RC32434_CPU_GPIO (1 << 8) - -/* Reserved GPIO signals */ -#define RC32434_AF_SPARE_6 (1 << 9) -#define RC32434_AF_SPARE_4 (1 << 10) -#define RC32434_AF_SPARE_3 (1 << 11) -#define RC32434_AF_SPARE_2 (1 << 12) - -/* PCI messaging unit */ -#define RC32434_PCI_MSU_GPIO (1 << 13) - -/* NAND GPIO signals */ -#define GPIO_RDY 8 -#define GPIO_WPX 9 -#define GPIO_ALE 10 -#define GPIO_CLE 11 - -/* Compact Flash GPIO pin */ -#define CF_GPIO_NUM 13 - -extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val); -extern unsigned get_434_reg(unsigned reg_offs); -extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask); -extern unsigned char get_latch_u5(void); - -#endif /* _RC32434_GPIO_H_ */ diff --git a/include/asm-mips/mach-rc32434/integ.h b/include/asm-mips/mach-rc32434/integ.h deleted file mode 100644 index fa65bc3d8807..000000000000 --- a/include/asm-mips/mach-rc32434/integ.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Definitions for the Watchdog registers - * - * Copyright 2002 Ryan Holm - * Copyright 2008 Florian Fainelli - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef __RC32434_INTEG_H__ -#define __RC32434_INTEG_H__ - -#include - -#define INTEG0_BASE_ADDR 0x18030030 - -struct integ { - u32 errcs; /* sticky use ERRCS_ */ - u32 wtcount; /* Watchdog timer count reg. */ - u32 wtcompare; /* Watchdog timer timeout value. */ - u32 wtc; /* Watchdog timer control. use WTC_ */ -}; - -/* Error counters */ -#define RC32434_ERR_WTO 0 -#define RC32434_ERR_WNE 1 -#define RC32434_ERR_UCW 2 -#define RC32434_ERR_UCR 3 -#define RC32434_ERR_UPW 4 -#define RC32434_ERR_UPR 5 -#define RC32434_ERR_UDW 6 -#define RC32434_ERR_UDR 7 -#define RC32434_ERR_SAE 8 -#define RC32434_ERR_WRE 9 - -/* Watchdog control bits */ -#define RC32434_WTC_EN 0 -#define RC32434_WTC_TO 1 - -#endif /* __RC32434_INTEG_H__ */ diff --git a/include/asm-mips/mach-rc32434/irq.h b/include/asm-mips/mach-rc32434/irq.h deleted file mode 100644 index 56738d8ec4e2..000000000000 --- a/include/asm-mips/mach-rc32434/irq.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __ASM_RC32434_IRQ_H -#define __ASM_RC32434_IRQ_H - -#define NR_IRQS 256 - -#include -#include - -/* Interrupt Controller */ -#define IC_GROUP0_PEND (REGBASE + 0x38000) -#define IC_GROUP0_MASK (REGBASE + 0x38008) -#define IC_GROUP_OFFSET 0x0C - -#define NUM_INTR_GROUPS 5 - -/* 16550 UARTs */ -#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */ - /* GRP3 IRQ numbers start here */ -#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32) - /* GRP4 IRQ numbers start here */ -#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32) - /* GRP5 IRQ numbers start here */ -#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32) -#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32) - -#define UART0_IRQ (GROUP3_IRQ_BASE + 0) - -#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0) -#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1) -#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9) -#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10) - -#endif /* __ASM_RC32434_IRQ_H */ diff --git a/include/asm-mips/mach-rc32434/pci.h b/include/asm-mips/mach-rc32434/pci.h deleted file mode 100644 index 410638f2af74..000000000000 --- a/include/asm-mips/mach-rc32434/pci.h +++ /dev/null @@ -1,481 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Copyright 2004 IDT Inc. (rischelp@idt.com) - * - * Initial Release - */ - -#ifndef _ASM_RC32434_PCI_H_ -#define _ASM_RC32434_PCI_H_ - -#define epld_mask ((volatile unsigned char *)0xB900000d) - -#define PCI0_BASE_ADDR 0x18080000 -#define PCI_LBA_COUNT 4 - -struct pci_map { - u32 address; /* Address. */ - u32 control; /* Control. */ - u32 mapping; /* mapping. */ -}; - -struct pci_reg { - u32 pcic; - u32 pcis; - u32 pcism; - u32 pcicfga; - u32 pcicfgd; - volatile struct pci_map pcilba[PCI_LBA_COUNT]; - u32 pcidac; - u32 pcidas; - u32 pcidasm; - u32 pcidad; - u32 pcidma8c; - u32 pcidma9c; - u32 pcitc; -}; - -#define PCI_MSU_COUNT 2 - -struct pci_msu { - u32 pciim[PCI_MSU_COUNT]; - u32 pciom[PCI_MSU_COUNT]; - u32 pciid; - u32 pciiic; - u32 pciiim; - u32 pciiod; - u32 pciioic; - u32 pciioim; -}; - -/* - * PCI Control Register - */ - -#define PCI_CTL_EN (1 << 0) -#define PCI_CTL_TNR (1 << 1) -#define PCI_CTL_SCE (1 << 2) -#define PCI_CTL_IEN (1 << 3) -#define PCI_CTL_AAA (1 << 4) -#define PCI_CTL_EAP (1 << 5) -#define PCI_CTL_PCIM_BIT 6 -#define PCI_CTL_PCIM 0x000001c0 - -#define PCI_CTL_PCIM_DIS 0 -#define PCI_CTL_PCIM_TNR 1 /* Satellite - target not ready */ -#define PCI_CTL_PCIM_SUS 2 /* Satellite - suspended CPU. */ -#define PCI_CTL_PCIM_EXT 3 /* Host - external arbiter. */ -#define PCI_CTL PCIM_PRIO 4 /* Host - fixed priority arb. */ -#define PCI_CTL_PCIM_RR 5 /* Host - round robin priority. */ -#define PCI_CTL_PCIM_RSVD6 6 -#define PCI_CTL_PCIM_RSVD7 7 - -#define PCI_CTL_IGM (1 << 9) - -/* - * PCI Status Register - */ - -#define PCI_STAT_EED (1 << 0) -#define PCI_STAT_WR (1 << 1) -#define PCI_STAT_NMI (1 << 2) -#define PCI_STAT_II (1 << 3) -#define PCI_STAT_CWE (1 << 4) -#define PCI_STAT_CRE (1 << 5) -#define PCI_STAT_MDPE (1 << 6) -#define PCI_STAT_STA (1 << 7) -#define PCI_STAT_RTA (1 << 8) -#define PCI_STAT_RMA (1 << 9) -#define PCI_STAT_SSE (1 << 10) -#define PCI_STAT_OSE (1 << 11) -#define PCI_STAT_PE (1 << 12) -#define PCI_STAT_TAE (1 << 13) -#define PCI_STAT_RLE (1 << 14) -#define PCI_STAT_BME (1 << 15) -#define PCI_STAT_PRD (1 << 16) -#define PCI_STAT_RIP (1 << 17) - -/* - * PCI Status Mask Register - */ - -#define PCI_STATM_EED PCI_STAT_EED -#define PCI_STATM_WR PCI_STAT_WR -#define PCI_STATM_NMI PCI_STAT_NMI -#define PCI_STATM_II PCI_STAT_II -#define PCI_STATM_CWE PCI_STAT_CWE -#define PCI_STATM_CRE PCI_STAT_CRE -#define PCI_STATM_MDPE PCI_STAT_MDPE -#define PCI_STATM_STA PCI_STAT_STA -#define PCI_STATM_RTA PCI_STAT_RTA -#define PCI_STATM_RMA PCI_STAT_RMA -#define PCI_STATM_SSE PCI_STAT_SSE -#define PCI_STATM_OSE PCI_STAT_OSE -#define PCI_STATM_PE PCI_STAT_PE -#define PCI_STATM_TAE PCI_STAT_TAE -#define PCI_STATM_RLE PCI_STAT_RLE -#define PCI_STATM_BME PCI_STAT_BME -#define PCI_STATM_PRD PCI_STAT_PRD -#define PCI_STATM_RIP PCI_STAT_RIP - -/* - * PCI Configuration Address Register - */ -#define PCI_CFGA_REG_BIT 2 -#define PCI_CFGA_REG 0x000000fc -#define PCI_CFGA_REG_ID (0x00 >> 2) /* use PCFGID */ -#define PCI_CFGA_REG_04 (0x04 >> 2) /* use PCFG04_ */ -#define PCI_CFGA_REG_08 (0x08 >> 2) /* use PCFG08_ */ -#define PCI_CFGA_REG_0C (0x0C >> 2) /* use PCFG0C_ */ -#define PCI_CFGA_REG_PBA0 (0x10 >> 2) /* use PCIPBA_ */ -#define PCI_CFGA_REG_PBA1 (0x14 >> 2) /* use PCIPBA_ */ -#define PCI_CFGA_REG_PBA2 (0x18 >> 2) /* use PCIPBA_ */ -#define PCI_CFGA_REG_PBA3 (0x1c >> 2) /* use PCIPBA_ */ -#define PCI_CFGA_REG_SUBSYS (0x2c >> 2) /* use PCFGSS_ */ -#define PCI_CFGA_REG_3C (0x3C >> 2) /* use PCFG3C_ */ -#define PCI_CFGA_REG_PBBA0C (0x44 >> 2) /* use PCIPBAC_ */ -#define PCI_CFGA_REG_PBA0M (0x48 >> 2) -#define PCI_CFGA_REG_PBA1C (0x4c >> 2) /* use PCIPBAC_ */ -#define PCI_CFGA_REG_PBA1M (0x50 >> 2) -#define PCI_CFGA_REG_PBA2C (0x54 >> 2) /* use PCIPBAC_ */ -#define PCI_CFGA_REG_PBA2M (0x58 >> 2) -#define PCI_CFGA_REG_PBA3C (0x5c >> 2) /* use PCIPBAC_ */ -#define PCI_CFGA_REG_PBA3M (0x60 >> 2) -#define PCI_CFGA_REG_PMGT (0x64 >> 2) -#define PCI_CFGA_FUNC_BIT 8 -#define PCI_CFGA_FUNC 0x00000700 -#define PCI_CFGA_DEV_BIT 11 -#define PCI_CFGA_DEV 0x0000f800 -#define PCI_CFGA_DEV_INTERN 0 -#define PCI_CFGA_BUS_BIT 16 -#define PCI CFGA_BUS 0x00ff0000 -#define PCI_CFGA_BUS_TYPE0 0 -#define PCI_CFGA_EN (1 << 31) - -/* PCI CFG04 commands */ -#define PCI_CFG04_CMD_IO_ENA (1 << 0) -#define PCI_CFG04_CMD_MEM_ENA (1 << 1) -#define PCI_CFG04_CMD_BM_ENA (1 << 2) -#define PCI_CFG04_CMD_MW_INV (1 << 4) -#define PCI_CFG04_CMD_PAR_ENA (1 << 6) -#define PCI_CFG04_CMD_SER_ENA (1 << 8) -#define PCI_CFG04_CMD_FAST_ENA (1 << 9) - -/* PCI CFG04 status fields */ -#define PCI_CFG04_STAT_BIT 16 -#define PCI_CFG04_STAT 0xffff0000 -#define PCI_CFG04_STAT_66_MHZ (1 << 21) -#define PCI_CFG04_STAT_FBB (1 << 23) -#define PCI_CFG04_STAT_MDPE (1 << 24) -#define PCI_CFG04_STAT_DST (1 << 25) -#define PCI_CFG04_STAT_STA (1 << 27) -#define PCI_CFG04_STAT_RTA (1 << 28) -#define PCI_CFG04_STAT_RMA (1 << 29) -#define PCI_CFG04_STAT_SSE (1 << 30) -#define PCI_CFG04_STAT_PE (1 << 31) - -#define PCI_PBA_MSI (1 << 0) -#define PCI_PBA_P (1 << 2) - -/* PCI PBAC registers */ -#define PCI_PBAC_MSI (1 << 0) -#define PCI_PBAC_P (1 << 1) -#define PCI_PBAC_SIZE_BIT 2 -#define PCI_PBAC_SIZE 0x0000007c -#define PCI_PBAC_SB (1 << 7) -#define PCI_PBAC_PP (1 << 8) -#define PCI_PBAC_MR_BIT 9 -#define PCI_PBAC_MR 0x00000600 -#define PCI_PBAC_MR_RD 0 -#define PCI_PBAC_MR_RD_LINE 1 -#define PCI_PBAC_MR_RD_MULT 2 -#define PCI_PBAC_MRL (1 << 11) -#define PCI_PBAC_MRM (1 << 12) -#define PCI_PBAC_TRP (1 << 13) - -#define PCI_CFG40_TRDY_TIM 0x000000ff -#define PCI_CFG40_RET_LIM 0x0000ff00 - -/* - * PCI Local Base Address [0|1|2|3] Register - */ - -#define PCI_LBA_BADDR_BIT 0 -#define PCI_LBA_BADDR 0xffffff00 - -/* - * PCI Local Base Address Control Register - */ - -#define PCI_LBAC_MSI (1 << 0) -#define PCI_LBAC_MSI_MEM 0 -#define PCI_LBAC_MSI_IO 1 -#define PCI_LBAC_SIZE_BIT 2 -#define PCI_LBAC_SIZE 0x0000007c -#define PCI_LBAC_SB (1 << 7) -#define PCI_LBAC_RT (1 << 8) -#define PCI_LBAC_RT_NO_PREF 0 -#define PCI_LBAC_RT_PREF 1 - -/* - * PCI Local Base Address [0|1|2|3] Mapping Register - */ -#define PCI_LBAM_MADDR_BIT 8 -#define PCI_LBAM_MADDR 0xffffff00 - -/* - * PCI Decoupled Access Control Register - */ -#define PCI_DAC_DEN (1 << 0) - -/* - * PCI Decoupled Access Status Register - */ -#define PCI_DAS_D (1 << 0) -#define PCI_DAS_B (1 << 1) -#define PCI_DAS_E (1 << 2) -#define PCI_DAS_OFE (1 << 3) -#define PCI_DAS_OFF (1 << 4) -#define PCI_DAS_IFE (1 << 5) -#define PCI_DAS_IFF (1 << 6) - -/* - * PCI DMA Channel 8 Configuration Register - */ -#define PCI_DMA8C_MBS_BIT 0 -#define PCI_DMA8C_MBS 0x00000fff /* Maximum Burst Size. */ -#define PCI_DMA8C_OUR (1 << 12) - -/* - * PCI DMA Channel 9 Configuration Register - */ -#define PCI_DMA9C_MBS_BIT 0 /* Maximum Burst Size. */ -#define PCI_DMA9C_MBS 0x00000fff - -/* - * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors - */ - -#define PCI_DMAD_PT_BIT 22 /* in DEVCMD field (descriptor) */ -#define PCI_DMAD_PT 0x00c00000 /* preferred transaction field */ -/* These are for reads (DMA channel 8) */ -#define PCI_DMAD_DEVCMD_MR 0 /* memory read */ -#define PCI_DMAD_DEVCMD_MRL 1 /* memory read line */ -#define PCI_DMAD_DEVCMD_MRM 2 /* memory read multiple */ -#define PCI_DMAD_DEVCMD_IOR 3 /* I/O read */ -/* These are for writes (DMA channel 9) */ -#define PCI_DMAD_DEVCMD_MW 0 /* memory write */ -#define PCI_DMAD_DEVCMD_MWI 1 /* memory write invalidate */ -#define PCI_DMAD_DEVCMD_IOW 3 /* I/O write */ - -/* Swap byte field applies to both DMA channel 8 and 9 */ -#define PCI_DMAD_SB (1 << 24) /* swap byte field */ - - -/* - * PCI Target Control Register - */ - -#define PCI_TC_RTIMER_BIT 0 -#define PCI_TC_RTIMER 0x000000ff -#define PCI_TC_DTIMER_BIT 8 -#define PCI_TC_DTIMER 0x0000ff00 -#define PCI_TC_RDR (1 << 18) -#define PCI_TC_DDT (1 << 19) - -/* - * PCI messaging unit [applies to both inbound and outbound registers ] - */ -#define PCI_MSU_M0 (1 << 0) -#define PCI_MSU_M1 (1 << 1) -#define PCI_MSU_DB (1 << 2) - -#define PCI_MSG_ADDR 0xB8088010 -#define PCI0_ADDR 0xB8080000 -#define rc32434_pci ((struct pci_reg *) PCI0_ADDR) -#define rc32434_pci_msg ((struct pci_msu *) PCI_MSG_ADDR) - -#define PCIM_SHFT 0x6 -#define PCIM_BIT_LEN 0x7 -#define PCIM_H_EA 0x3 -#define PCIM_H_IA_FIX 0x4 -#define PCIM_H_IA_RR 0x5 -#if 0 -#define PCI_ADDR_START 0x13000000 -#endif - -#define PCI_ADDR_START 0x50000000 - -#define CPUTOPCI_MEM_WIN 0x02000000 -#define CPUTOPCI_IO_WIN 0x00100000 -#define PCILBA_SIZE_SHFT 2 -#define PCILBA_SIZE_MASK 0x1F -#define SIZE_256MB 0x1C -#define SIZE_128MB 0x1B -#define SIZE_64MB 0x1A -#define SIZE_32MB 0x19 -#define SIZE_16MB 0x18 -#define SIZE_4MB 0x16 -#define SIZE_2MB 0x15 -#define SIZE_1MB 0x14 -#define KORINA_CONFIG0_ADDR 0x80000000 -#define KORINA_CONFIG1_ADDR 0x80000004 -#define KORINA_CONFIG2_ADDR 0x80000008 -#define KORINA_CONFIG3_ADDR 0x8000000C -#define KORINA_CONFIG4_ADDR 0x80000010 -#define KORINA_CONFIG5_ADDR 0x80000014 -#define KORINA_CONFIG6_ADDR 0x80000018 -#define KORINA_CONFIG7_ADDR 0x8000001C -#define KORINA_CONFIG8_ADDR 0x80000020 -#define KORINA_CONFIG9_ADDR 0x80000024 -#define KORINA_CONFIG10_ADDR 0x80000028 -#define KORINA_CONFIG11_ADDR 0x8000002C -#define KORINA_CONFIG12_ADDR 0x80000030 -#define KORINA_CONFIG13_ADDR 0x80000034 -#define KORINA_CONFIG14_ADDR 0x80000038 -#define KORINA_CONFIG15_ADDR 0x8000003C -#define KORINA_CONFIG16_ADDR 0x80000040 -#define KORINA_CONFIG17_ADDR 0x80000044 -#define KORINA_CONFIG18_ADDR 0x80000048 -#define KORINA_CONFIG19_ADDR 0x8000004C -#define KORINA_CONFIG20_ADDR 0x80000050 -#define KORINA_CONFIG21_ADDR 0x80000054 -#define KORINA_CONFIG22_ADDR 0x80000058 -#define KORINA_CONFIG23_ADDR 0x8000005C -#define KORINA_CONFIG24_ADDR 0x80000060 -#define KORINA_CONFIG25_ADDR 0x80000064 -#define KORINA_CMD (PCI_CFG04_CMD_IO_ENA | \ - PCI_CFG04_CMD_MEM_ENA | \ - PCI_CFG04_CMD_BM_ENA | \ - PCI_CFG04_CMD_MW_INV | \ - PCI_CFG04_CMD_PAR_ENA | \ - PCI_CFG04_CMD_SER_ENA) - -#define KORINA_STAT (PCI_CFG04_STAT_MDPE | \ - PCI_CFG04_STAT_STA | \ - PCI_CFG04_STAT_RTA | \ - PCI_CFG04_STAT_RMA | \ - PCI_CFG04_STAT_SSE | \ - PCI_CFG04_STAT_PE) - -#define KORINA_CNFG1 ((KORINA_STAT<<16)|KORINA_CMD) - -#define KORINA_REVID 0 -#define KORINA_CLASS_CODE 0 -#define KORINA_CNFG2 ((KORINA_CLASS_CODE<<8) | \ - KORINA_REVID) - -#define KORINA_CACHE_LINE_SIZE 4 -#define KORINA_MASTER_LAT 0x3c -#define KORINA_HEADER_TYPE 0 -#define KORINA_BIST 0 - -#define KORINA_CNFG3 ((KORINA_BIST << 24) | \ - (KORINA_HEADER_TYPE<<16) | \ - (KORINA_MASTER_LAT<<8) | \ - KORINA_CACHE_LINE_SIZE) - -#define KORINA_BAR0 0x00000008 /* 128 MB Memory */ -#define KORINA_BAR1 0x18800001 /* 1 MB IO */ -#define KORINA_BAR2 0x18000001 /* 2 MB IO window for Korina - internal Registers */ -#define KORINA_BAR3 0x48000008 /* Spare 128 MB Memory */ - -#define KORINA_CNFG4 KORINA_BAR0 -#define KORINA_CNFG5 KORINA_BAR1 -#define KORINA_CNFG6 KORINA_BAR2 -#define KORINA_CNFG7 KORINA_BAR3 - -#define KORINA_SUBSYS_VENDOR_ID 0x011d -#define KORINA_SUBSYSTEM_ID 0x0214 -#define KORINA_CNFG8 0 -#define KORINA_CNFG9 0 -#define KORINA_CNFG10 0 -#define KORINA_CNFG11 ((KORINA_SUBSYS_VENDOR_ID<<16) | \ - KORINA_SUBSYSTEM_ID) -#define KORINA_INT_LINE 1 -#define KORINA_INT_PIN 1 -#define KORINA_MIN_GNT 8 -#define KORINA_MAX_LAT 0x38 -#define KORINA_CNFG12 0 -#define KORINA_CNFG13 0 -#define KORINA_CNFG14 0 -#define KORINA_CNFG15 ((KORINA_MAX_LAT<<24) | \ - (KORINA_MIN_GNT<<16) | \ - (KORINA_INT_PIN<<8) | \ - KORINA_INT_LINE) -#define KORINA_RETRY_LIMIT 0x80 -#define KORINA_TRDY_LIMIT 0x80 -#define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \ - KORINA_TRDY_LIMIT) -#define PCI_PBAxC_R 0x0 -#define PCI_PBAxC_RL 0x1 -#define PCI_PBAxC_RM 0x2 -#define SIZE_SHFT 2 - -#if defined(__MIPSEB__) -#define KORINA_PBA0C (PCI_PBAC_MRL | PCI_PBAC_SB | \ - ((PCI_PBAxC_RM & 0x3) << PCI_PBAC_MR_BIT) | \ - PCI_PBAC_PP | \ - (SIZE_128MB< - * Copyright 2008 Florian Fainelli - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#define PROM_ENTRY(x) (0xbfc00000 + ((x) * 8)) - -#define SR_NMI 0x00180000 -#define SERIAL_SPEED_ENTRY 0x00000001 - -#define FREQ_TAG "HZ=" -#define KMAC_TAG "kmac=" -#define MEM_TAG "mem=" -#define BOARD_TAG "board=" - -#define BOARD_RB532 "500" -#define BOARD_RB532A "500r5" diff --git a/include/asm-mips/mach-rc32434/rb.h b/include/asm-mips/mach-rc32434/rb.h deleted file mode 100644 index 79e8ef67d0d3..000000000000 --- a/include/asm-mips/mach-rc32434/rb.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Copyright (C) 2004 IDT Inc. - * Copyright (C) 2006 Felix Fietkau - */ -#ifndef __ASM_RC32434_RB_H -#define __ASM_RC32434_RB_H - -#include - -#define REGBASE 0x18000000 -#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(REGBASE)) -#define UART0BASE 0x58000 -#define RST (1 << 15) -#define DEV0BASE 0x010000 -#define DEV0MASK 0x010004 -#define DEV0C 0x010008 -#define DEV0T 0x01000C -#define DEV1BASE 0x010010 -#define DEV1MASK 0x010014 -#define DEV1C 0x010018 -#define DEV1TC 0x01001C -#define DEV2BASE 0x010020 -#define DEV2MASK 0x010024 -#define DEV2C 0x010028 -#define DEV2TC 0x01002C -#define DEV3BASE 0x010030 -#define DEV3MASK 0x010034 -#define DEV3C 0x010038 -#define DEV3TC 0x01003C -#define BTCS 0x010040 -#define BTCOMPARE 0x010044 -#define GPIOBASE 0x050000 -#define GPIOCFG 0x050004 -#define GPIOD 0x050008 -#define GPIOILEVEL 0x05000C -#define GPIOISTAT 0x050010 -#define GPIONMIEN 0x050014 -#define IMASK6 0x038038 -#define LO_WPX (1 << 0) -#define LO_ALE (1 << 1) -#define LO_CLE (1 << 2) -#define LO_CEX (1 << 3) -#define LO_FOFF (1 << 5) -#define LO_SPICS (1 << 6) -#define LO_ULED (1 << 7) - -#define BIT_TO_MASK(x) (1 << x) - -struct dev_reg { - u32 base; - u32 mask; - u32 ctl; - u32 timing; -}; - -struct korina_device { - char *name; - unsigned char mac[6]; - struct net_device *dev; -}; - -struct cf_device { - int gpio_pin; - void *dev; - struct gendisk *gd; -}; - -struct mpmc_device { - unsigned char state; - spinlock_t lock; - void __iomem *base; -}; - -#endif /* __ASM_RC32434_RB_H */ diff --git a/include/asm-mips/mach-rc32434/rc32434.h b/include/asm-mips/mach-rc32434/rc32434.h deleted file mode 100644 index fce25d4231fc..000000000000 --- a/include/asm-mips/mach-rc32434/rc32434.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Definitions for IDT RC323434 CPU. - */ - -#ifndef _ASM_RC32434_RC32434_H_ -#define _ASM_RC32434_RC32434_H_ - -#include -#include - -#define IDT_CLOCK_MULT 2 - -/* cpu pipeline flush */ -static inline void rc32434_sync(void) -{ - __asm__ volatile ("sync"); -} - -#endif /* _ASM_RC32434_RC32434_H_ */ diff --git a/include/asm-mips/mach-rc32434/timer.h b/include/asm-mips/mach-rc32434/timer.h deleted file mode 100644 index e49b1d57a017..000000000000 --- a/include/asm-mips/mach-rc32434/timer.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Definitions for timer registers - * - * Copyright 2004 Philip Rischel - * Copyright 2008 Florian Fainelli - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef __ASM_RC32434_TIMER_H -#define __ASM_RC32434_TIMER_H - -#include - -#define TIMER0_BASE_ADDR 0x18028000 -#define TIMER_COUNT 3 - -struct timer_counter { - u32 count; - u32 compare; - u32 ctc; /*use CTC_ */ -}; - -struct timer { - struct timer_counter tim[TIMER_COUNT]; - u32 rcount; /* use RCOUNT_ */ - u32 rcompare; /* use RCOMPARE_ */ - u32 rtc; /* use RTC_ */ -}; - -#define RC32434_CTC_EN_BIT 0 -#define RC32434_CTC_TO_BIT 1 - -/* Real time clock registers */ -#define RC32434_RTC_MSK(x) BIT_TO_MASK(x) -#define RC32434_RTC_CE_BIT 0 -#define RC32434_RTC_TO_BIT 1 -#define RC32434_RTC_RQE_BIT 2 - -/* Counter registers */ -#define RC32434_RCOUNT_BIT 0 -#define RC32434_RCOUNT_MSK 0x0000ffff -#define RC32434_RCOMP_BIT 0 -#define RC32434_RCOMP_MSK 0x0000ffff - -#endif /* __ASM_RC32434_TIMER_H */ diff --git a/include/asm-mips/mach-rc32434/war.h b/include/asm-mips/mach-rc32434/war.h deleted file mode 100644 index 3ddf187e98a6..000000000000 --- a/include/asm-mips/mach-rc32434/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_MIPS_WAR_H -#define __ASM_MIPS_MACH_MIPS_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 1 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ diff --git a/include/asm-mips/mach-rm/cpu-feature-overrides.h b/include/asm-mips/mach-rm/cpu-feature-overrides.h deleted file mode 100644 index ccf543363537..000000000000 --- a/include/asm-mips/mach-rm/cpu-feature-overrides.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org) - * - * SNI RM200 C apparently was only shipped with R4600 V2.0 and R5000 processors. - */ -#ifndef __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H - -#include - -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_4k_cache 1 -#define cpu_has_fpu 1 -#define cpu_has_32fpr 1 -#define cpu_has_counter 1 -#define cpu_has_watch 0 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_cache_cdex_p 1 -#define cpu_has_prefetch 0 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-rm/mc146818rtc.h b/include/asm-mips/mach-rm/mc146818rtc.h deleted file mode 100644 index 145bce096fe9..000000000000 --- a/include/asm-mips/mach-rm/mc146818rtc.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 by Ralf Baechle - * - * RTC routines for PC style attached Dallas chip with ARC epoch. - */ -#ifndef __ASM_MACH_RM_MC146818RTC_H -#define __ASM_MACH_RM_MC146818RTC_H - -#ifdef CONFIG_CPU_BIG_ENDIAN -#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) -#else -#define mc146818_decode_year(year) ((year) + 1980) -#endif - -#include_next - -#endif /* __ASM_MACH_RM_MC146818RTC_H */ diff --git a/include/asm-mips/mach-rm/war.h b/include/asm-mips/mach-rm/war.h deleted file mode 100644 index 948d3129a114..000000000000 --- a/include/asm-mips/mach-rm/war.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_RM_WAR_H -#define __ASM_MIPS_MACH_RM_WAR_H - -/* - * The RM200C seems to have been shipped only with V2.0 R4600s - */ - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 1 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_RM_WAR_H */ diff --git a/include/asm-mips/mach-sibyte/cpu-feature-overrides.h b/include/asm-mips/mach-sibyte/cpu-feature-overrides.h deleted file mode 100644 index 1c1f92415b9a..000000000000 --- a/include/asm-mips/mach-sibyte/cpu-feature-overrides.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H - -/* - * Sibyte are MIPS64 processors wired to a specific configuration - */ -#define cpu_has_watch 1 -#define cpu_has_mips16 0 -#define cpu_has_divec 1 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 1 -#define cpu_has_ejtag 1 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 1 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 -#define cpu_icache_snoops_remote_store 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_has_mips32r1 1 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 1 -#define cpu_has_mips64r2 0 - -#define cpu_has_inclusive_pcaches 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 -#define cpu_scache_line_size() 32 - -#endif /* __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-sibyte/war.h b/include/asm-mips/mach-sibyte/war.h deleted file mode 100644 index 7950ef4f032c..000000000000 --- a/include/asm-mips/mach-sibyte/war.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_SIBYTE_WAR_H -#define __ASM_MIPS_MACH_SIBYTE_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 - -#if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \ - defined(CONFIG_SB1_PASS_2_WORKAROUNDS) - -#define BCM1250_M3_WAR 1 -#define SIBYTE_1956_WAR 1 - -#else - -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 - -#endif - -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_SIBYTE_WAR_H */ diff --git a/include/asm-mips/mach-tx39xx/ioremap.h b/include/asm-mips/mach-tx39xx/ioremap.h deleted file mode 100644 index 93c6c04ffda3..000000000000 --- a/include/asm-mips/mach-tx39xx/ioremap.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * include/asm-mips/mach-tx39xx/ioremap.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_MACH_TX39XX_IOREMAP_H -#define __ASM_MACH_TX39XX_IOREMAP_H - -#include - -/* - * Allow physical addresses to be fixed up to help peripherals located - * outside the low 32-bit range -- generic pass-through version. - */ -static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) -{ - return phys_addr; -} - -static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, - unsigned long flags) -{ -#define TXX9_DIRECTMAP_BASE 0xff000000ul - if (offset >= TXX9_DIRECTMAP_BASE && - offset < TXX9_DIRECTMAP_BASE + 0xff0000) - return (void __iomem *)offset; - return NULL; -} - -static inline int plat_iounmap(const volatile void __iomem *addr) -{ - return (unsigned long)addr >= TXX9_DIRECTMAP_BASE; -} - -#endif /* __ASM_MACH_TX39XX_IOREMAP_H */ diff --git a/include/asm-mips/mach-tx39xx/mangle-port.h b/include/asm-mips/mach-tx39xx/mangle-port.h deleted file mode 100644 index ef0b502fd8b7..000000000000 --- a/include/asm-mips/mach-tx39xx/mangle-port.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef __ASM_MACH_TX39XX_MANGLE_PORT_H -#define __ASM_MACH_TX39XX_MANGLE_PORT_H - -#if defined(CONFIG_TOSHIBA_JMR3927) -extern unsigned long (*__swizzle_addr_b)(unsigned long port); -#define NEEDS_TXX9_SWIZZLE_ADDR_B -#else -#define __swizzle_addr_b(port) (port) -#endif -#define __swizzle_addr_w(port) (port) -#define __swizzle_addr_l(port) (port) -#define __swizzle_addr_q(port) (port) - -#define ioswabb(a, x) (x) -#define __mem_ioswabb(a, x) (x) -#define ioswabw(a, x) le16_to_cpu(x) -#define __mem_ioswabw(a, x) (x) -#define ioswabl(a, x) le32_to_cpu(x) -#define __mem_ioswabl(a, x) (x) -#define ioswabq(a, x) le64_to_cpu(x) -#define __mem_ioswabq(a, x) (x) - -#endif /* __ASM_MACH_TX39XX_MANGLE_PORT_H */ diff --git a/include/asm-mips/mach-tx39xx/war.h b/include/asm-mips/mach-tx39xx/war.h deleted file mode 100644 index 433814616359..000000000000 --- a/include/asm-mips/mach-tx39xx/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_TX39XX_WAR_H -#define __ASM_MIPS_MACH_TX39XX_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_TX39XX_WAR_H */ diff --git a/include/asm-mips/mach-tx49xx/cpu-feature-overrides.h b/include/asm-mips/mach-tx49xx/cpu-feature-overrides.h deleted file mode 100644 index 275eaf92c748..000000000000 --- a/include/asm-mips/mach-tx49xx/cpu-feature-overrides.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H - -#define cpu_has_llsc 1 -#define cpu_has_64bits 1 -#define cpu_has_inclusive_pcaches 0 - -#define cpu_has_mips16 0 -#define cpu_has_mdmx 0 -#define cpu_has_mips3d 0 -#define cpu_has_smartmips 0 -#define cpu_has_vtag_icache 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-tx49xx/ioremap.h b/include/asm-mips/mach-tx49xx/ioremap.h deleted file mode 100644 index 1e7beae72229..000000000000 --- a/include/asm-mips/mach-tx49xx/ioremap.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-mips/mach-tx49xx/ioremap.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_MACH_TX49XX_IOREMAP_H -#define __ASM_MACH_TX49XX_IOREMAP_H - -#include - -/* - * Allow physical addresses to be fixed up to help peripherals located - * outside the low 32-bit range -- generic pass-through version. - */ -static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) -{ - return phys_addr; -} - -static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, - unsigned long flags) -{ -#ifdef CONFIG_64BIT -#define TXX9_DIRECTMAP_BASE 0xfff000000ul -#else -#define TXX9_DIRECTMAP_BASE 0xff000000ul -#endif - if (offset >= TXX9_DIRECTMAP_BASE && - offset < TXX9_DIRECTMAP_BASE + 0x400000) - return (void __iomem *)(unsigned long)(int)offset; - return NULL; -} - -static inline int plat_iounmap(const volatile void __iomem *addr) -{ - return (unsigned long)addr >= - (unsigned long)(int)(TXX9_DIRECTMAP_BASE & 0xffffffff); -} - -#endif /* __ASM_MACH_TX49XX_IOREMAP_H */ diff --git a/include/asm-mips/mach-tx49xx/kmalloc.h b/include/asm-mips/mach-tx49xx/kmalloc.h deleted file mode 100644 index 913ff196259d..000000000000 --- a/include/asm-mips/mach-tx49xx/kmalloc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_MACH_TX49XX_KMALLOC_H -#define __ASM_MACH_TX49XX_KMALLOC_H - -/* - * All happy, no need to define ARCH_KMALLOC_MINALIGN - */ - -#endif /* __ASM_MACH_TX49XX_KMALLOC_H */ diff --git a/include/asm-mips/mach-tx49xx/war.h b/include/asm-mips/mach-tx49xx/war.h deleted file mode 100644 index 39b5d1177c57..000000000000 --- a/include/asm-mips/mach-tx49xx/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_TX49XX_WAR_H -#define __ASM_MIPS_MACH_TX49XX_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 1 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_TX49XX_WAR_H */ diff --git a/include/asm-mips/mach-vr41xx/irq.h b/include/asm-mips/mach-vr41xx/irq.h deleted file mode 100644 index 862058d3f81b..000000000000 --- a/include/asm-mips/mach-vr41xx/irq.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_MACH_VR41XX_IRQ_H -#define __ASM_MACH_VR41XX_IRQ_H - -#include /* for MIPS_CPU_IRQ_BASE */ - -#include_next - -#endif /* __ASM_MACH_VR41XX_IRQ_H */ diff --git a/include/asm-mips/mach-vr41xx/war.h b/include/asm-mips/mach-vr41xx/war.h deleted file mode 100644 index 56a38926412a..000000000000 --- a/include/asm-mips/mach-vr41xx/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_VR41XX_WAR_H -#define __ASM_MIPS_MACH_VR41XX_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_VR41XX_WAR_H */ diff --git a/include/asm-mips/mach-wrppmc/mach-gt64120.h b/include/asm-mips/mach-wrppmc/mach-gt64120.h deleted file mode 100644 index 83746b84a5ec..000000000000 --- a/include/asm-mips/mach-wrppmc/mach-gt64120.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * This is a direct copy of the ev96100.h file, with a global - * search and replace. The numbers are the same. - * - * The reason I'm duplicating this is so that the 64120/96100 - * defines won't be confusing in the source code. - */ -#ifndef __ASM_MIPS_GT64120_H -#define __ASM_MIPS_GT64120_H - -/* - * This is the CPU physical memory map of PPMC Board: - * - * 0x00000000-0x03FFFFFF - 64MB SDRAM (SCS[0]#) - * 0x1C000000-0x1C000000 - LED (CS0) - * 0x1C800000-0x1C800007 - UART 16550 port (CS1) - * 0x1F000000-0x1F000000 - MailBox (CS3) - * 0x1FC00000-0x20000000 - 4MB Flash (BOOT CS) - */ - -#define WRPPMC_SDRAM_SCS0_BASE 0x00000000 -#define WRPPMC_SDRAM_SCS0_SIZE 0x04000000 - -#define WRPPMC_UART16550_BASE 0x1C800000 -#define WRPPMC_UART16550_CLOCK 3686400 /* 3.68MHZ */ - -#define WRPPMC_LED_BASE 0x1C000000 -#define WRPPMC_MBOX_BASE 0x1F000000 - -#define WRPPMC_BOOTROM_BASE 0x1FC00000 -#define WRPPMC_BOOTROM_SIZE 0x00400000 /* 4M Flash */ - -#define WRPPMC_MIPS_TIMER_IRQ 7 /* MIPS compare/count timer interrupt */ -#define WRPPMC_UART16550_IRQ 6 -#define WRPPMC_PCI_INTA_IRQ 3 - -/* - * PCI Bus I/O and Memory resources allocation - * - * NOTE: We only have PCI_0 hose interface - */ -#define GT_PCI_MEM_BASE 0x13000000UL -#define GT_PCI_MEM_SIZE 0x02000000UL -#define GT_PCI_IO_BASE 0x11000000UL -#define GT_PCI_IO_SIZE 0x02000000UL - -/* - * PCI interrupts will come in on either the INTA or INTD interrupt lines, - * which are mapped to the #2 and #5 interrupt pins of the MIPS. On our - * boards, they all either come in on IntD or they all come in on IntA, they - * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the - * "requested" interrupt numbers and go through the list whenever we get an - * IntA/D. - * - * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and - * INTD is 11. - */ -#define GT_TIMER 4 -#define GT_INTA 2 -#define GT_INTD 5 - -#ifndef __ASSEMBLY__ - -/* - * GT64120 internal register space base address - */ -extern unsigned long gt64120_base; - -#define GT64120_BASE (gt64120_base) - -/* define WRPPMC_EARLY_DEBUG to enable early output something to UART */ -#undef WRPPMC_EARLY_DEBUG - -#ifdef WRPPMC_EARLY_DEBUG -extern void wrppmc_led_on(int mask); -extern void wrppmc_led_off(int mask); -extern void wrppmc_early_printk(const char *fmt, ...); -#else -#define wrppmc_early_printk(fmt, ...) do {} while (0) -#endif /* WRPPMC_EARLY_DEBUG */ - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_MIPS_GT64120_H */ diff --git a/include/asm-mips/mach-wrppmc/war.h b/include/asm-mips/mach-wrppmc/war.h deleted file mode 100644 index ac48629bb1ce..000000000000 --- a/include/asm-mips/mach-wrppmc/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_WRPPMC_WAR_H -#define __ASM_MIPS_MACH_WRPPMC_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_WRPPMC_WAR_H */ diff --git a/include/asm-mips/mach-yosemite/cpu-feature-overrides.h b/include/asm-mips/mach-yosemite/cpu-feature-overrides.h deleted file mode 100644 index 470e5e9e10d6..000000000000 --- a/include/asm-mips/mach-yosemite/cpu-feature-overrides.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H - -/* - * Momentum Jaguar ATX always has the RM9000 processor. - */ -#define cpu_has_watch 1 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 -#define cpu_icache_snoops_remote_store 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_has_inclusive_pcaches 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 -#define cpu_scache_line_size() 32 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-yosemite/war.h b/include/asm-mips/mach-yosemite/war.h deleted file mode 100644 index e5c6d53efc86..000000000000 --- a/include/asm-mips/mach-yosemite/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_YOSEMITE_WAR_H -#define __ASM_MIPS_MACH_YOSEMITE_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 1 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_YOSEMITE_WAR_H */ diff --git a/include/asm-mips/mc146818-time.h b/include/asm-mips/mc146818-time.h deleted file mode 100644 index cdc379a0a94e..000000000000 --- a/include/asm-mips/mc146818-time.h +++ /dev/null @@ -1,119 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Machine dependent access functions for RTC registers. - */ -#ifndef __ASM_MC146818_TIME_H -#define __ASM_MC146818_TIME_H - -#include -#include -#include - -/* - * For check timing call set_rtc_mmss() 500ms; used in timer interrupt. - */ -#define USEC_AFTER 500000 -#define USEC_BEFORE 500000 - -/* - * In order to set the CMOS clock precisely, set_rtc_mmss has to be - * called 500 ms after the second nowtime has started, because when - * nowtime is written into the registers of the CMOS clock, it will - * jump to the next second precisely 500 ms later. Check the Motorola - * MC146818A or Dallas DS12887 data sheet for details. - * - * BUG: This routine does not handle hour overflow properly; it just - * sets the minutes. Usually you'll only notice that after reboot! - */ -static inline int mc146818_set_rtc_mmss(unsigned long nowtime) -{ - int real_seconds, real_minutes, cmos_minutes; - unsigned char save_control, save_freq_select; - int retval = 0; - unsigned long flags; - - spin_lock_irqsave(&rtc_lock, flags); - save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ - CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); - - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ - CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - - cmos_minutes = CMOS_READ(RTC_MINUTES); - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - BCD_TO_BIN(cmos_minutes); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BIN_TO_BCD(real_seconds); - BIN_TO_BCD(real_minutes); - } - CMOS_WRITE(real_seconds, RTC_SECONDS); - CMOS_WRITE(real_minutes, RTC_MINUTES); - } else { - printk(KERN_WARNING - "set_rtc_mmss: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - /* The following flags have to be released exactly in this order, - * otherwise the DS12887 (popular MC146818A clone with integrated - * battery and quartz) will not reset the oscillator and will not - * update precisely 500 ms later. You won't find this mentioned in - * the Dallas Semiconductor data sheets, but who believes data - * sheets anyway ... -- Markus Kuhn - */ - CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - spin_unlock_irqrestore(&rtc_lock, flags); - - return retval; -} - -static inline unsigned long mc146818_get_cmos_time(void) -{ - unsigned int year, mon, day, hour, min, sec; - unsigned long flags; - - spin_lock_irqsave(&rtc_lock, flags); - - do { - sec = CMOS_READ(RTC_SECONDS); - min = CMOS_READ(RTC_MINUTES); - hour = CMOS_READ(RTC_HOURS); - day = CMOS_READ(RTC_DAY_OF_MONTH); - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); - } while (sec != CMOS_READ(RTC_SECONDS)); - - if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - } - spin_unlock_irqrestore(&rtc_lock, flags); - year = mc146818_decode_year(year); - - return mktime(year, mon, day, hour, min, sec); -} - -#endif /* __ASM_MC146818_TIME_H */ diff --git a/include/asm-mips/mc146818rtc.h b/include/asm-mips/mc146818rtc.h deleted file mode 100644 index 68b4da6d520b..000000000000 --- a/include/asm-mips/mc146818rtc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Machine dependent access functions for RTC registers. - * - * Copyright (C) 1996, 1997, 1998, 2000 Ralf Baechle - * Copyright (C) 2002 Maciej W. Rozycki - */ -#ifndef _ASM_MC146818RTC_H -#define _ASM_MC146818RTC_H - -#include - -#endif /* _ASM_MC146818RTC_H */ diff --git a/include/asm-mips/mips-boards/bonito64.h b/include/asm-mips/mips-boards/bonito64.h deleted file mode 100644 index a0f04bb99c99..000000000000 --- a/include/asm-mips/mips-boards/bonito64.h +++ /dev/null @@ -1,436 +0,0 @@ -/* - * Bonito Register Map - * - * This file is the original bonito.h from Algorithmics with minor changes - * to fit into linux. - * - * Copyright (c) 1999 Algorithmics Ltd - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2001 MIPS Technologies, Inc. All rights reserved. - * - * Algorithmics gives permission for anyone to use and modify this file - * without any obligation or license condition except that you retain - * this copyright message in any source redistribution in whole or part. - * - */ - -/* Revision 1.48 autogenerated on 08/17/99 15:20:01 */ -/* This bonito64 version editted from bonito.h Revision 1.48 on 11/09/00 */ - -#ifndef _ASM_MIPS_BOARDS_BONITO64_H -#define _ASM_MIPS_BOARDS_BONITO64_H - -#ifdef __ASSEMBLY__ - -/* offsets from base register */ -#define BONITO(x) (x) - -#elif defined(CONFIG_LEMOTE_FULONG) - -#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x))) -#define BONITO_IRQ_BASE 32 - -#else - -/* - * Algorithmics Bonito64 system controller register base. - */ -extern unsigned long _pcictrl_bonito; -extern unsigned long _pcictrl_bonito_pcicfg; - -#define BONITO(x) *(volatile u32 *)(_pcictrl_bonito + (x)) - -#endif /* __ASSEMBLY__ */ - - -#define BONITO_BOOT_BASE 0x1fc00000 -#define BONITO_BOOT_SIZE 0x00100000 -#define BONITO_BOOT_TOP (BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1) -#define BONITO_FLASH_BASE 0x1c000000 -#define BONITO_FLASH_SIZE 0x03000000 -#define BONITO_FLASH_TOP (BONITO_FLASH_BASE+BONITO_FLASH_SIZE-1) -#define BONITO_SOCKET_BASE 0x1f800000 -#define BONITO_SOCKET_SIZE 0x00400000 -#define BONITO_SOCKET_TOP (BONITO_SOCKET_BASE+BONITO_SOCKET_SIZE-1) -#define BONITO_REG_BASE 0x1fe00000 -#define BONITO_REG_SIZE 0x00040000 -#define BONITO_REG_TOP (BONITO_REG_BASE+BONITO_REG_SIZE-1) -#define BONITO_DEV_BASE 0x1ff00000 -#define BONITO_DEV_SIZE 0x00100000 -#define BONITO_DEV_TOP (BONITO_DEV_BASE+BONITO_DEV_SIZE-1) -#define BONITO_PCILO_BASE 0x10000000 -#define BONITO_PCILO_SIZE 0x0c000000 -#define BONITO_PCILO_TOP (BONITO_PCILO_BASE+BONITO_PCILO_SIZE-1) -#define BONITO_PCILO0_BASE 0x10000000 -#define BONITO_PCILO1_BASE 0x14000000 -#define BONITO_PCILO2_BASE 0x18000000 -#define BONITO_PCIHI_BASE 0x20000000 -#define BONITO_PCIHI_SIZE 0x20000000 -#define BONITO_PCIHI_TOP (BONITO_PCIHI_BASE+BONITO_PCIHI_SIZE-1) -#define BONITO_PCIIO_BASE 0x1fd00000 -#define BONITO_PCIIO_SIZE 0x00100000 -#define BONITO_PCIIO_TOP (BONITO_PCIIO_BASE+BONITO_PCIIO_SIZE-1) -#define BONITO_PCICFG_BASE 0x1fe80000 -#define BONITO_PCICFG_SIZE 0x00080000 -#define BONITO_PCICFG_TOP (BONITO_PCICFG_BASE+BONITO_PCICFG_SIZE-1) - - -/* Bonito Register Bases */ - -#define BONITO_PCICONFIGBASE 0x00 -#define BONITO_REGBASE 0x100 - - -/* PCI Configuration Registers */ - -#define BONITO_PCI_REG(x) BONITO(BONITO_PCICONFIGBASE + (x)) -#define BONITO_PCIDID BONITO_PCI_REG(0x00) -#define BONITO_PCICMD BONITO_PCI_REG(0x04) -#define BONITO_PCICLASS BONITO_PCI_REG(0x08) -#define BONITO_PCILTIMER BONITO_PCI_REG(0x0c) -#define BONITO_PCIBASE0 BONITO_PCI_REG(0x10) -#define BONITO_PCIBASE1 BONITO_PCI_REG(0x14) -#define BONITO_PCIBASE2 BONITO_PCI_REG(0x18) -#define BONITO_PCIEXPRBASE BONITO_PCI_REG(0x30) -#define BONITO_PCIINT BONITO_PCI_REG(0x3c) - -#define BONITO_PCICMD_PERR_CLR 0x80000000 -#define BONITO_PCICMD_SERR_CLR 0x40000000 -#define BONITO_PCICMD_MABORT_CLR 0x20000000 -#define BONITO_PCICMD_MTABORT_CLR 0x10000000 -#define BONITO_PCICMD_TABORT_CLR 0x08000000 -#define BONITO_PCICMD_MPERR_CLR 0x01000000 -#define BONITO_PCICMD_PERRRESPEN 0x00000040 -#define BONITO_PCICMD_ASTEPEN 0x00000080 -#define BONITO_PCICMD_SERREN 0x00000100 -#define BONITO_PCILTIMER_BUSLATENCY 0x0000ff00 -#define BONITO_PCILTIMER_BUSLATENCY_SHIFT 8 - - - - -/* 1. Bonito h/w Configuration */ -/* Power on register */ - -#define BONITO_BONPONCFG BONITO(BONITO_REGBASE + 0x00) - -#define BONITO_BONPONCFG_SYSCONTROLLERRD 0x00040000 -#define BONITO_BONPONCFG_ROMCS1SAMP 0x00020000 -#define BONITO_BONPONCFG_ROMCS0SAMP 0x00010000 -#define BONITO_BONPONCFG_CPUBIGEND 0x00004000 -/* Added by RPF 11-9-00 */ -#define BONITO_BONPONCFG_BURSTORDER 0x00001000 -/* --- */ -#define BONITO_BONPONCFG_CPUPARITY 0x00002000 -#define BONITO_BONPONCFG_CPUTYPE 0x00000007 -#define BONITO_BONPONCFG_CPUTYPE_SHIFT 0 -#define BONITO_BONPONCFG_PCIRESET_OUT 0x00000008 -#define BONITO_BONPONCFG_IS_ARBITER 0x00000010 -#define BONITO_BONPONCFG_ROMBOOT 0x000000c0 -#define BONITO_BONPONCFG_ROMBOOT_SHIFT 6 - -#define BONITO_BONPONCFG_ROMBOOT_FLASH (0x0<>26) & BONITO_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) - -#define BONITO_PCIMAP_WINSIZE (1<<26) -#define BONITO_PCIMAP_WINOFFSET(ADDR) ((ADDR) & (BONITO_PCIMAP_WINSIZE - 1)) -#define BONITO_PCIMAP_WINBASE(ADDR) ((ADDR) << 26) - -/* pcimembaseCfg */ - -#define BONITO_PCIMEMBASECFG_MASK 0xf0000000 -#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK 0x0000001f -#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK_SHIFT 0 -#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS 0x000003e0 -#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS_SHIFT 5 -#define BONITO_PCIMEMBASECFG_MEMBASE0_CACHED 0x00000400 -#define BONITO_PCIMEMBASECFG_MEMBASE0_IO 0x00000800 - -#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK 0x0001f000 -#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK_SHIFT 12 -#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS 0x003e0000 -#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS_SHIFT 17 -#define BONITO_PCIMEMBASECFG_MEMBASE1_CACHED 0x00400000 -#define BONITO_PCIMEMBASECFG_MEMBASE1_IO 0x00800000 - -#define BONITO_PCIMEMBASECFG_ASHIFT 23 -#define BONITO_PCIMEMBASECFG_AMASK 0x007fffff -#define BONITO_PCIMEMBASECFGSIZE(WIN, SIZE) (((~((SIZE)-1))>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) -#define BONITO_PCIMEMBASECFGBASE(WIN, BASE) (((BASE)>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) - -#define BONITO_PCIMEMBASECFG_SIZE(WIN, CFG) (((((~(CFG)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)) << (BONITO_PCIMEMBASECFG_ASHIFT - BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) | BONITO_PCIMEMBASECFG_AMASK) - - -#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) -#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) -#define BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) - -#define BONITO_PCITOPHYS(WIN, ADDR, CFG) ( \ - (((ADDR) & (~(BONITO_PCIMEMBASECFG_MASK))) & (~(BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)))) | \ - (BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG)) \ - ) - -/* PCICmd */ - -#define BONITO_PCICMD_MEMEN 0x00000002 -#define BONITO_PCICMD_MSTREN 0x00000004 - - -#endif /* _ASM_MIPS_BOARDS_BONITO64_H */ diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h deleted file mode 100644 index 7f0b034dd9a5..000000000000 --- a/include/asm-mips/mips-boards/generic.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Defines of the MIPS boards specific address-MAP, registers, etc. - */ -#ifndef __ASM_MIPS_BOARDS_GENERIC_H -#define __ASM_MIPS_BOARDS_GENERIC_H - -#include -#include -#include - -/* - * Display register base. - */ -#define ASCII_DISPLAY_WORD_BASE 0x1f000410 -#define ASCII_DISPLAY_POS_BASE 0x1f000418 - - -/* - * Yamon Prom print address. - */ -#define YAMON_PROM_PRINT_ADDR 0x1fc00504 - - -/* - * Reset register. - */ -#define SOFTRES_REG 0x1f000500 -#define GORESET 0x42 - -/* - * Revision register. - */ -#define MIPS_REVISION_REG 0x1fc00010 -#define MIPS_REVISION_CORID_QED_RM5261 0 -#define MIPS_REVISION_CORID_CORE_LV 1 -#define MIPS_REVISION_CORID_BONITO64 2 -#define MIPS_REVISION_CORID_CORE_20K 3 -#define MIPS_REVISION_CORID_CORE_FPGA 4 -#define MIPS_REVISION_CORID_CORE_MSC 5 -#define MIPS_REVISION_CORID_CORE_EMUL 6 -#define MIPS_REVISION_CORID_CORE_FPGA2 7 -#define MIPS_REVISION_CORID_CORE_FPGAR2 8 -#define MIPS_REVISION_CORID_CORE_FPGA3 9 -#define MIPS_REVISION_CORID_CORE_24K 10 -#define MIPS_REVISION_CORID_CORE_FPGA4 11 -#define MIPS_REVISION_CORID_CORE_FPGA5 12 - -/**** Artificial corid defines ****/ -/* - * CoreEMUL with Bonito System Controller is treated like a Core20K - * CoreEMUL with SOC-it 101 System Controller is treated like a CoreMSC - */ -#define MIPS_REVISION_CORID_CORE_EMUL_BON -1 -#define MIPS_REVISION_CORID_CORE_EMUL_MSC -2 - -#define MIPS_REVISION_CORID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 10) & 0x3f) - -extern int mips_revision_corid; - -#define MIPS_REVISION_SCON_OTHER 0 -#define MIPS_REVISION_SCON_SOCITSC 1 -#define MIPS_REVISION_SCON_SOCITSCP 2 - -/* Artificial SCON defines for MIPS_REVISION_SCON_OTHER */ -#define MIPS_REVISION_SCON_UNKNOWN -1 -#define MIPS_REVISION_SCON_GT64120 -2 -#define MIPS_REVISION_SCON_BONITO -3 -#define MIPS_REVISION_SCON_BRTL -4 -#define MIPS_REVISION_SCON_SOCIT -5 -#define MIPS_REVISION_SCON_ROCIT -6 - -#define MIPS_REVISION_SCONID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 24) & 0xff) - -extern int mips_revision_sconid; - -extern void mips_reboot_setup(void); - -#ifdef CONFIG_PCI -extern void mips_pcibios_init(void); -#else -#define mips_pcibios_init() do { } while (0) -#endif - -#ifdef CONFIG_KGDB -extern void kgdb_config(void); -#endif - -#endif /* __ASM_MIPS_BOARDS_GENERIC_H */ diff --git a/include/asm-mips/mips-boards/launch.h b/include/asm-mips/mips-boards/launch.h deleted file mode 100644 index d8ae7f95a522..000000000000 --- a/include/asm-mips/mips-boards/launch.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * - */ - -#ifndef _ASSEMBLER_ - -struct cpulaunch { - unsigned long pc; - unsigned long gp; - unsigned long sp; - unsigned long a0; - unsigned long _pad[3]; /* pad to cache line size to avoid thrashing */ - unsigned long flags; -}; - -#else - -#define LOG2CPULAUNCH 5 -#define LAUNCH_PC 0 -#define LAUNCH_GP 4 -#define LAUNCH_SP 8 -#define LAUNCH_A0 12 -#define LAUNCH_FLAGS 28 - -#endif - -#define LAUNCH_FREADY 1 -#define LAUNCH_FGO 2 -#define LAUNCH_FGONE 4 - -#define CPULAUNCH 0x00000f00 -#define NCPULAUNCH 8 - -/* Polling period in count cycles for secondary CPU's */ -#define LAUNCHPERIOD 10000 diff --git a/include/asm-mips/mips-boards/malta.h b/include/asm-mips/mips-boards/malta.h deleted file mode 100644 index c1891578fa65..000000000000 --- a/include/asm-mips/mips-boards/malta.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Defines of the Malta board specific address-MAP, registers, etc. - */ -#ifndef __ASM_MIPS_BOARDS_MALTA_H -#define __ASM_MIPS_BOARDS_MALTA_H - -#include -#include -#include -#include - -/* Mips interrupt controller found in SOCit variations */ -#define MIPS_MSC01_IC_REG_BASE 0x1bc40000 -#define MIPS_SOCITSC_IC_REG_BASE 0x1ffa0000 - -/* - * Malta I/O ports base address for the Galileo GT64120 and Algorithmics - * Bonito system controllers. - */ -#define MALTA_GT_PORT_BASE get_gt_port_base(GT_PCI0IOLD_OFS) -#define MALTA_BONITO_PORT_BASE ((unsigned long)ioremap (0x1fd00000, 0x10000)) -#define MALTA_MSC_PORT_BASE get_msc_port_base(MSC01_PCI_SC2PIOBASL) - -static inline unsigned long get_gt_port_base(unsigned long reg) -{ - unsigned long addr; - addr = GT_READ(reg); - return (unsigned long) ioremap (((addr & 0xffff) << 21), 0x10000); -} - -static inline unsigned long get_msc_port_base(unsigned long reg) -{ - unsigned long addr; - MSC_READ(reg, addr); - return (unsigned long) ioremap(addr, 0x10000); -} - -/* - * GCMP Specific definitions - */ -#define GCMP_BASE_ADDR 0x1fbf8000 -#define GCMP_ADDRSPACE_SZ (256 * 1024) - -/* - * GIC Specific definitions - */ -#define GIC_BASE_ADDR 0x1bdc0000 -#define GIC_ADDRSPACE_SZ (128 * 1024) - -/* - * MSC01 BIU Specific definitions - * FIXME : These should be elsewhere ? - */ -#define MSC01_BIU_REG_BASE 0x1bc80000 -#define MSC01_BIU_ADDRSPACE_SZ (256 * 1024) -#define MSC01_SC_CFG_OFS 0x0110 -#define MSC01_SC_CFG_GICPRES_MSK 0x00000004 -#define MSC01_SC_CFG_GICPRES_SHF 2 -#define MSC01_SC_CFG_GICENA_SHF 3 - -/* - * Malta RTC-device indirect register access. - */ -#define MALTA_RTC_ADR_REG 0x70 -#define MALTA_RTC_DAT_REG 0x71 - -/* - * Malta SMSC FDC37M817 Super I/O Controller register. - */ -#define SMSC_CONFIG_REG 0x3f0 -#define SMSC_DATA_REG 0x3f1 - -#define SMSC_CONFIG_DEVNUM 0x7 -#define SMSC_CONFIG_ACTIVATE 0x30 -#define SMSC_CONFIG_ENTER 0x55 -#define SMSC_CONFIG_EXIT 0xaa - -#define SMSC_CONFIG_DEVNUM_FLOPPY 0 - -#define SMSC_CONFIG_ACTIVATE_ENABLE 1 - -#define SMSC_WRITE(x, a) outb(x, a) - -#define MALTA_JMPRS_REG 0x1f000210 - -#endif /* __ASM_MIPS_BOARDS_MALTA_H */ diff --git a/include/asm-mips/mips-boards/maltaint.h b/include/asm-mips/mips-boards/maltaint.h deleted file mode 100644 index cea872fc6f5c..000000000000 --- a/include/asm-mips/mips-boards/maltaint.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Defines for the Malta interrupt controller. - * - */ -#ifndef _MIPS_MALTAINT_H -#define _MIPS_MALTAINT_H - -#include - -/* - * Interrupts 0..15 are used for Malta ISA compatible interrupts - */ -#define MALTA_INT_BASE 0 - -/* CPU interrupt offsets */ -#define MIPSCPU_INT_SW0 0 -#define MIPSCPU_INT_SW1 1 -#define MIPSCPU_INT_MB0 2 -#define MIPSCPU_INT_I8259A MIPSCPU_INT_MB0 -#define MIPSCPU_INT_MB1 3 -#define MIPSCPU_INT_SMI MIPSCPU_INT_MB1 -#define MIPSCPU_INT_IPI0 MIPSCPU_INT_MB1 /* GIC IPI */ -#define MIPSCPU_INT_MB2 4 -#define MIPSCPU_INT_IPI1 MIPSCPU_INT_MB2 /* GIC IPI */ -#define MIPSCPU_INT_MB3 5 -#define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3 -#define MIPSCPU_INT_MB4 6 -#define MIPSCPU_INT_CORELO MIPSCPU_INT_MB4 - -/* - * Interrupts 64..127 are used for Soc-it Classic interrupts - */ -#define MSC01C_INT_BASE 64 - -/* SOC-it Classic interrupt offsets */ -#define MSC01C_INT_TMR 0 -#define MSC01C_INT_PCI 1 - -/* - * Interrupts 64..127 are used for Soc-it EIC interrupts - */ -#define MSC01E_INT_BASE 64 - -/* SOC-it EIC interrupt offsets */ -#define MSC01E_INT_SW0 1 -#define MSC01E_INT_SW1 2 -#define MSC01E_INT_MB0 3 -#define MSC01E_INT_I8259A MSC01E_INT_MB0 -#define MSC01E_INT_MB1 4 -#define MSC01E_INT_SMI MSC01E_INT_MB1 -#define MSC01E_INT_MB2 5 -#define MSC01E_INT_MB3 6 -#define MSC01E_INT_COREHI MSC01E_INT_MB3 -#define MSC01E_INT_MB4 7 -#define MSC01E_INT_CORELO MSC01E_INT_MB4 -#define MSC01E_INT_TMR 8 -#define MSC01E_INT_PCI 9 -#define MSC01E_INT_PERFCTR 10 -#define MSC01E_INT_CPUCTR 11 - -/* GIC's Nomenclature for Core Interrupt Pins on the Malta */ -#define GIC_CPU_INT0 0 /* Core Interrupt 2 */ -#define GIC_CPU_INT1 1 /* . */ -#define GIC_CPU_INT2 2 /* . */ -#define GIC_CPU_INT3 3 /* . */ -#define GIC_CPU_INT4 4 /* . */ -#define GIC_CPU_INT5 5 /* Core Interrupt 5 */ - -#define GIC_EXT_INTR(x) x - -/* Dummy data */ -#define X 0xdead - -/* External Interrupts used for IPI */ -#define GIC_IPI_EXT_INTR_RESCHED_VPE0 16 -#define GIC_IPI_EXT_INTR_CALLFNC_VPE0 17 -#define GIC_IPI_EXT_INTR_RESCHED_VPE1 18 -#define GIC_IPI_EXT_INTR_CALLFNC_VPE1 19 -#define GIC_IPI_EXT_INTR_RESCHED_VPE2 20 -#define GIC_IPI_EXT_INTR_CALLFNC_VPE2 21 -#define GIC_IPI_EXT_INTR_RESCHED_VPE3 22 -#define GIC_IPI_EXT_INTR_CALLFNC_VPE3 23 - -#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) - -#ifndef __ASSEMBLY__ -extern void maltaint_init(void); -#endif - -#endif /* !(_MIPS_MALTAINT_H) */ diff --git a/include/asm-mips/mips-boards/msc01_pci.h b/include/asm-mips/mips-boards/msc01_pci.h deleted file mode 100644 index e036b7dd6deb..000000000000 --- a/include/asm-mips/mips-boards/msc01_pci.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * PCI Register definitions for the MIPS System Controller. - * - * Copyright (C) 2002, 2005 MIPS Technologies, Inc. All rights reserved. - * Authors: Carsten Langgaard - * Maciej W. Rozycki - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_MIPS_BOARDS_MSC01_PCI_H -#define __ASM_MIPS_BOARDS_MSC01_PCI_H - -/* - * Register offset addresses - */ - -#define MSC01_PCI_ID_OFS 0x0000 -#define MSC01_PCI_SC2PMBASL_OFS 0x0208 -#define MSC01_PCI_SC2PMMSKL_OFS 0x0218 -#define MSC01_PCI_SC2PMMAPL_OFS 0x0228 -#define MSC01_PCI_SC2PIOBASL_OFS 0x0248 -#define MSC01_PCI_SC2PIOMSKL_OFS 0x0258 -#define MSC01_PCI_SC2PIOMAPL_OFS 0x0268 -#define MSC01_PCI_P2SCMSKL_OFS 0x0308 -#define MSC01_PCI_P2SCMAPL_OFS 0x0318 -#define MSC01_PCI_INTCFG_OFS 0x0600 -#define MSC01_PCI_INTSTAT_OFS 0x0608 -#define MSC01_PCI_CFGADDR_OFS 0x0610 -#define MSC01_PCI_CFGDATA_OFS 0x0618 -#define MSC01_PCI_IACK_OFS 0x0620 -#define MSC01_PCI_HEAD0_OFS 0x2000 /* DevID, VendorID */ -#define MSC01_PCI_HEAD1_OFS 0x2008 /* Status, Command */ -#define MSC01_PCI_HEAD2_OFS 0x2010 /* Class code, RevID */ -#define MSC01_PCI_HEAD3_OFS 0x2018 /* bist, header, latency */ -#define MSC01_PCI_HEAD4_OFS 0x2020 /* BAR 0 */ -#define MSC01_PCI_HEAD5_OFS 0x2028 /* BAR 1 */ -#define MSC01_PCI_HEAD6_OFS 0x2030 /* BAR 2 */ -#define MSC01_PCI_HEAD7_OFS 0x2038 /* BAR 3 */ -#define MSC01_PCI_HEAD8_OFS 0x2040 /* BAR 4 */ -#define MSC01_PCI_HEAD9_OFS 0x2048 /* BAR 5 */ -#define MSC01_PCI_HEAD10_OFS 0x2050 /* CardBus CIS Ptr */ -#define MSC01_PCI_HEAD11_OFS 0x2058 /* SubSystem ID, -VendorID */ -#define MSC01_PCI_HEAD12_OFS 0x2060 /* ROM BAR */ -#define MSC01_PCI_HEAD13_OFS 0x2068 /* Capabilities ptr */ -#define MSC01_PCI_HEAD14_OFS 0x2070 /* reserved */ -#define MSC01_PCI_HEAD15_OFS 0x2078 /* Maxl, ming, intpin, int */ -#define MSC01_PCI_BAR0_OFS 0x2220 -#define MSC01_PCI_CFG_OFS 0x2380 -#define MSC01_PCI_SWAP_OFS 0x2388 - - -/***************************************************************************** - * Register encodings - ****************************************************************************/ - -#define MSC01_PCI_ID_ID_SHF 16 -#define MSC01_PCI_ID_ID_MSK 0x00ff0000 -#define MSC01_PCI_ID_ID_HOSTBRIDGE 82 -#define MSC01_PCI_ID_MAR_SHF 8 -#define MSC01_PCI_ID_MAR_MSK 0x0000ff00 -#define MSC01_PCI_ID_MIR_SHF 0 -#define MSC01_PCI_ID_MIR_MSK 0x000000ff - -#define MSC01_PCI_SC2PMBASL_BAS_SHF 24 -#define MSC01_PCI_SC2PMBASL_BAS_MSK 0xff000000 - -#define MSC01_PCI_SC2PMMSKL_MSK_SHF 24 -#define MSC01_PCI_SC2PMMSKL_MSK_MSK 0xff000000 - -#define MSC01_PCI_SC2PMMAPL_MAP_SHF 24 -#define MSC01_PCI_SC2PMMAPL_MAP_MSK 0xff000000 - -#define MSC01_PCI_SC2PIOBASL_BAS_SHF 24 -#define MSC01_PCI_SC2PIOBASL_BAS_MSK 0xff000000 - -#define MSC01_PCI_SC2PIOMSKL_MSK_SHF 24 -#define MSC01_PCI_SC2PIOMSKL_MSK_MSK 0xff000000 - -#define MSC01_PCI_SC2PIOMAPL_MAP_SHF 24 -#define MSC01_PCI_SC2PIOMAPL_MAP_MSK 0xff000000 - -#define MSC01_PCI_P2SCMSKL_MSK_SHF 24 -#define MSC01_PCI_P2SCMSKL_MSK_MSK 0xff000000 - -#define MSC01_PCI_P2SCMAPL_MAP_SHF 24 -#define MSC01_PCI_P2SCMAPL_MAP_MSK 0xff000000 - -#define MSC01_PCI_INTCFG_RST_SHF 10 -#define MSC01_PCI_INTCFG_RST_MSK 0x00000400 -#define MSC01_PCI_INTCFG_RST_BIT 0x00000400 -#define MSC01_PCI_INTCFG_MWE_SHF 9 -#define MSC01_PCI_INTCFG_MWE_MSK 0x00000200 -#define MSC01_PCI_INTCFG_MWE_BIT 0x00000200 -#define MSC01_PCI_INTCFG_DTO_SHF 8 -#define MSC01_PCI_INTCFG_DTO_MSK 0x00000100 -#define MSC01_PCI_INTCFG_DTO_BIT 0x00000100 -#define MSC01_PCI_INTCFG_MA_SHF 7 -#define MSC01_PCI_INTCFG_MA_MSK 0x00000080 -#define MSC01_PCI_INTCFG_MA_BIT 0x00000080 -#define MSC01_PCI_INTCFG_TA_SHF 6 -#define MSC01_PCI_INTCFG_TA_MSK 0x00000040 -#define MSC01_PCI_INTCFG_TA_BIT 0x00000040 -#define MSC01_PCI_INTCFG_RTY_SHF 5 -#define MSC01_PCI_INTCFG_RTY_MSK 0x00000020 -#define MSC01_PCI_INTCFG_RTY_BIT 0x00000020 -#define MSC01_PCI_INTCFG_MWP_SHF 4 -#define MSC01_PCI_INTCFG_MWP_MSK 0x00000010 -#define MSC01_PCI_INTCFG_MWP_BIT 0x00000010 -#define MSC01_PCI_INTCFG_MRP_SHF 3 -#define MSC01_PCI_INTCFG_MRP_MSK 0x00000008 -#define MSC01_PCI_INTCFG_MRP_BIT 0x00000008 -#define MSC01_PCI_INTCFG_SWP_SHF 2 -#define MSC01_PCI_INTCFG_SWP_MSK 0x00000004 -#define MSC01_PCI_INTCFG_SWP_BIT 0x00000004 -#define MSC01_PCI_INTCFG_SRP_SHF 1 -#define MSC01_PCI_INTCFG_SRP_MSK 0x00000002 -#define MSC01_PCI_INTCFG_SRP_BIT 0x00000002 -#define MSC01_PCI_INTCFG_SE_SHF 0 -#define MSC01_PCI_INTCFG_SE_MSK 0x00000001 -#define MSC01_PCI_INTCFG_SE_BIT 0x00000001 - -#define MSC01_PCI_INTSTAT_RST_SHF 10 -#define MSC01_PCI_INTSTAT_RST_MSK 0x00000400 -#define MSC01_PCI_INTSTAT_RST_BIT 0x00000400 -#define MSC01_PCI_INTSTAT_MWE_SHF 9 -#define MSC01_PCI_INTSTAT_MWE_MSK 0x00000200 -#define MSC01_PCI_INTSTAT_MWE_BIT 0x00000200 -#define MSC01_PCI_INTSTAT_DTO_SHF 8 -#define MSC01_PCI_INTSTAT_DTO_MSK 0x00000100 -#define MSC01_PCI_INTSTAT_DTO_BIT 0x00000100 -#define MSC01_PCI_INTSTAT_MA_SHF 7 -#define MSC01_PCI_INTSTAT_MA_MSK 0x00000080 -#define MSC01_PCI_INTSTAT_MA_BIT 0x00000080 -#define MSC01_PCI_INTSTAT_TA_SHF 6 -#define MSC01_PCI_INTSTAT_TA_MSK 0x00000040 -#define MSC01_PCI_INTSTAT_TA_BIT 0x00000040 -#define MSC01_PCI_INTSTAT_RTY_SHF 5 -#define MSC01_PCI_INTSTAT_RTY_MSK 0x00000020 -#define MSC01_PCI_INTSTAT_RTY_BIT 0x00000020 -#define MSC01_PCI_INTSTAT_MWP_SHF 4 -#define MSC01_PCI_INTSTAT_MWP_MSK 0x00000010 -#define MSC01_PCI_INTSTAT_MWP_BIT 0x00000010 -#define MSC01_PCI_INTSTAT_MRP_SHF 3 -#define MSC01_PCI_INTSTAT_MRP_MSK 0x00000008 -#define MSC01_PCI_INTSTAT_MRP_BIT 0x00000008 -#define MSC01_PCI_INTSTAT_SWP_SHF 2 -#define MSC01_PCI_INTSTAT_SWP_MSK 0x00000004 -#define MSC01_PCI_INTSTAT_SWP_BIT 0x00000004 -#define MSC01_PCI_INTSTAT_SRP_SHF 1 -#define MSC01_PCI_INTSTAT_SRP_MSK 0x00000002 -#define MSC01_PCI_INTSTAT_SRP_BIT 0x00000002 -#define MSC01_PCI_INTSTAT_SE_SHF 0 -#define MSC01_PCI_INTSTAT_SE_MSK 0x00000001 -#define MSC01_PCI_INTSTAT_SE_BIT 0x00000001 - -#define MSC01_PCI_CFGADDR_BNUM_SHF 16 -#define MSC01_PCI_CFGADDR_BNUM_MSK 0x00ff0000 -#define MSC01_PCI_CFGADDR_DNUM_SHF 11 -#define MSC01_PCI_CFGADDR_DNUM_MSK 0x0000f800 -#define MSC01_PCI_CFGADDR_FNUM_SHF 8 -#define MSC01_PCI_CFGADDR_FNUM_MSK 0x00000700 -#define MSC01_PCI_CFGADDR_RNUM_SHF 2 -#define MSC01_PCI_CFGADDR_RNUM_MSK 0x000000fc - -#define MSC01_PCI_CFGDATA_DATA_SHF 0 -#define MSC01_PCI_CFGDATA_DATA_MSK 0xffffffff - -/* The defines below are ONLY valid for a MEM bar! */ -#define MSC01_PCI_BAR0_SIZE_SHF 4 -#define MSC01_PCI_BAR0_SIZE_MSK 0xfffffff0 -#define MSC01_PCI_BAR0_P_SHF 3 -#define MSC01_PCI_BAR0_P_MSK 0x00000008 -#define MSC01_PCI_BAR0_P_BIT MSC01_PCI_BAR0_P_MSK -#define MSC01_PCI_BAR0_D_SHF 1 -#define MSC01_PCI_BAR0_D_MSK 0x00000006 -#define MSC01_PCI_BAR0_T_SHF 0 -#define MSC01_PCI_BAR0_T_MSK 0x00000001 -#define MSC01_PCI_BAR0_T_BIT MSC01_PCI_BAR0_T_MSK - - -#define MSC01_PCI_CFG_RA_SHF 17 -#define MSC01_PCI_CFG_RA_MSK 0x00020000 -#define MSC01_PCI_CFG_RA_BIT MSC01_PCI_CFG_RA_MSK -#define MSC01_PCI_CFG_G_SHF 16 -#define MSC01_PCI_CFG_G_MSK 0x00010000 -#define MSC01_PCI_CFG_G_BIT MSC01_PCI_CFG_G_MSK -#define MSC01_PCI_CFG_EN_SHF 15 -#define MSC01_PCI_CFG_EN_MSK 0x00008000 -#define MSC01_PCI_CFG_EN_BIT MSC01_PCI_CFG_EN_MSK -#define MSC01_PCI_CFG_MAXRTRY_SHF 0 -#define MSC01_PCI_CFG_MAXRTRY_MSK 0x00000fff - -#define MSC01_PCI_SWAP_IO_SHF 18 -#define MSC01_PCI_SWAP_IO_MSK 0x000c0000 -#define MSC01_PCI_SWAP_MEM_SHF 16 -#define MSC01_PCI_SWAP_MEM_MSK 0x00030000 -#define MSC01_PCI_SWAP_BAR0_SHF 0 -#define MSC01_PCI_SWAP_BAR0_MSK 0x00000003 -#define MSC01_PCI_SWAP_NOSWAP 0 -#define MSC01_PCI_SWAP_BYTESWAP 1 - -/* - * MIPS System controller PCI register base. - * - * FIXME - are these macros specific to Malta and co or to the MSC? If the - * latter, they should be moved elsewhere. - */ -#define MIPS_MSC01_PCI_REG_BASE 0x1bd00000 -#define MIPS_SOCITSC_PCI_REG_BASE 0x1ff10000 - -extern unsigned long _pcictrl_msc; - -#define MSC01_PCI_REG_BASE _pcictrl_msc - -#define MSC_WRITE(reg, data) do { *(volatile u32 *)(reg) = data; } while (0) -#define MSC_READ(reg, data) do { data = *(volatile u32 *)(reg); } while (0) - -/* - * Registers absolute addresses - */ - -#define MSC01_PCI_ID (MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS) -#define MSC01_PCI_SC2PMBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS) -#define MSC01_PCI_SC2PMMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS) -#define MSC01_PCI_SC2PMMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS) -#define MSC01_PCI_SC2PIOBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS) -#define MSC01_PCI_SC2PIOMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS) -#define MSC01_PCI_SC2PIOMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS) -#define MSC01_PCI_P2SCMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS) -#define MSC01_PCI_P2SCMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS) -#define MSC01_PCI_INTCFG (MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS) -#define MSC01_PCI_INTSTAT (MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS) -#define MSC01_PCI_CFGADDR (MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS) -#define MSC01_PCI_CFGDATA (MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS) -#define MSC01_PCI_IACK (MSC01_PCI_REG_BASE + MSC01_PCI_IACK_OFS) -#define MSC01_PCI_HEAD0 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD0_OFS) -#define MSC01_PCI_HEAD1 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD1_OFS) -#define MSC01_PCI_HEAD2 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD2_OFS) -#define MSC01_PCI_HEAD3 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD3_OFS) -#define MSC01_PCI_HEAD4 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD4_OFS) -#define MSC01_PCI_HEAD5 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD5_OFS) -#define MSC01_PCI_HEAD6 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD6_OFS) -#define MSC01_PCI_HEAD7 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD7_OFS) -#define MSC01_PCI_HEAD8 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD8_OFS) -#define MSC01_PCI_HEAD9 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD9_OFS) -#define MSC01_PCI_HEAD10 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD10_OFS) -#define MSC01_PCI_HEAD11 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) -#define MSC01_PCI_HEAD12 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) -#define MSC01_PCI_HEAD13 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) -#define MSC01_PCI_HEAD14 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) -#define MSC01_PCI_HEAD15 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) -#define MSC01_PCI_BAR0 (MSC01_PCI_REG_BASE + MSC01_PCI_BAR0_OFS) -#define MSC01_PCI_CFG (MSC01_PCI_REG_BASE + MSC01_PCI_CFG_OFS) -#define MSC01_PCI_SWAP (MSC01_PCI_REG_BASE + MSC01_PCI_SWAP_OFS) - -#endif /* __ASM_MIPS_BOARDS_MSC01_PCI_H */ diff --git a/include/asm-mips/mips-boards/piix4.h b/include/asm-mips/mips-boards/piix4.h deleted file mode 100644 index 2971d60f2e95..000000000000 --- a/include/asm-mips/mips-boards/piix4.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Register definitions for Intel PIIX4 South Bridge Device. - */ -#ifndef __ASM_MIPS_BOARDS_PIIX4_H -#define __ASM_MIPS_BOARDS_PIIX4_H - -/************************************************************************ - * IO register offsets - ************************************************************************/ -#define PIIX4_ICTLR1_ICW1 0x20 -#define PIIX4_ICTLR1_ICW2 0x21 -#define PIIX4_ICTLR1_ICW3 0x21 -#define PIIX4_ICTLR1_ICW4 0x21 -#define PIIX4_ICTLR2_ICW1 0xa0 -#define PIIX4_ICTLR2_ICW2 0xa1 -#define PIIX4_ICTLR2_ICW3 0xa1 -#define PIIX4_ICTLR2_ICW4 0xa1 -#define PIIX4_ICTLR1_OCW1 0x21 -#define PIIX4_ICTLR1_OCW2 0x20 -#define PIIX4_ICTLR1_OCW3 0x20 -#define PIIX4_ICTLR1_OCW4 0x20 -#define PIIX4_ICTLR2_OCW1 0xa1 -#define PIIX4_ICTLR2_OCW2 0xa0 -#define PIIX4_ICTLR2_OCW3 0xa0 -#define PIIX4_ICTLR2_OCW4 0xa0 - - -/************************************************************************ - * Register encodings. - ************************************************************************/ -#define PIIX4_OCW2_NSEOI (0x1 << 5) -#define PIIX4_OCW2_SEOI (0x3 << 5) -#define PIIX4_OCW2_RNSEOI (0x5 << 5) -#define PIIX4_OCW2_RAEOIS (0x4 << 5) -#define PIIX4_OCW2_RAEOIC (0x0 << 5) -#define PIIX4_OCW2_RSEOI (0x7 << 5) -#define PIIX4_OCW2_SP (0x6 << 5) -#define PIIX4_OCW2_NOP (0x2 << 5) - -#define PIIX4_OCW2_SEL (0x0 << 3) - -#define PIIX4_OCW2_ILS_0 0 -#define PIIX4_OCW2_ILS_1 1 -#define PIIX4_OCW2_ILS_2 2 -#define PIIX4_OCW2_ILS_3 3 -#define PIIX4_OCW2_ILS_4 4 -#define PIIX4_OCW2_ILS_5 5 -#define PIIX4_OCW2_ILS_6 6 -#define PIIX4_OCW2_ILS_7 7 -#define PIIX4_OCW2_ILS_8 0 -#define PIIX4_OCW2_ILS_9 1 -#define PIIX4_OCW2_ILS_10 2 -#define PIIX4_OCW2_ILS_11 3 -#define PIIX4_OCW2_ILS_12 4 -#define PIIX4_OCW2_ILS_13 5 -#define PIIX4_OCW2_ILS_14 6 -#define PIIX4_OCW2_ILS_15 7 - -#define PIIX4_OCW3_SEL (0x1 << 3) - -#define PIIX4_OCW3_IRR 0x2 -#define PIIX4_OCW3_ISR 0x3 - -#endif /* __ASM_MIPS_BOARDS_PIIX4_H */ diff --git a/include/asm-mips/mips-boards/prom.h b/include/asm-mips/mips-boards/prom.h deleted file mode 100644 index a9db576a9768..000000000000 --- a/include/asm-mips/mips-boards/prom.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * MIPS boards bootprom interface for the Linux kernel. - * - */ - -#ifndef _MIPS_PROM_H -#define _MIPS_PROM_H - -extern char *prom_getcmdline(void); -extern char *prom_getenv(char *name); -extern void prom_init_cmdline(void); -extern void prom_meminit(void); -extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); -extern void mips_display_message(const char *str); -extern void mips_display_word(unsigned int num); -extern void mips_scroll_message(void); -extern int get_ethernet_addr(char *ethernet_addr); - -/* Memory descriptor management. */ -#define PROM_MAX_PMEMBLOCKS 32 -struct prom_pmemblock { - unsigned long base; /* Within KSEG0. */ - unsigned int size; /* In bytes. */ - unsigned int type; /* free or prom memory */ -}; - -#endif /* !(_MIPS_PROM_H) */ diff --git a/include/asm-mips/mips-boards/sim.h b/include/asm-mips/mips-boards/sim.h deleted file mode 100644 index acb7c2331d98..000000000000 --- a/include/asm-mips/mips-boards/sim.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - */ - -#ifndef _ASM_MIPS_BOARDS_SIM_H -#define _ASM_MIPS_BOARDS_SIM_H - -#define STATS_ON 1 -#define STATS_OFF 2 -#define STATS_CLEAR 3 -#define STATS_DUMP 4 -#define TRACE_ON 5 -#define TRACE_OFF 6 - - -#define simcfg(code) \ -({ \ - __asm__ __volatile__( \ - "sltiu $0,$0, %0" \ - ::"i"(code) \ - ); \ -}) - - - -#endif diff --git a/include/asm-mips/mips-boards/simint.h b/include/asm-mips/mips-boards/simint.h deleted file mode 100644 index 8ef6db76d5c1..000000000000 --- a/include/asm-mips/mips-boards/simint.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#ifndef _MIPS_SIMINT_H -#define _MIPS_SIMINT_H - -#include - -#define SIM_INT_BASE 0 -#define MIPSCPU_INT_MB0 2 -#define MIPS_CPU_TIMER_IRQ 7 - - -#define MSC01E_INT_BASE 64 - -#define MSC01E_INT_CPUCTR 11 - -#endif diff --git a/include/asm-mips/mips_mt.h b/include/asm-mips/mips_mt.h deleted file mode 100644 index ac7935203f89..000000000000 --- a/include/asm-mips/mips_mt.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Definitions and decalrations for MIPS MT support - * that are common between SMTC, VSMP, and/or AP/SP - * kernel models. - */ -#ifndef __ASM_MIPS_MT_H -#define __ASM_MIPS_MT_H - -#include - -/* - * How many VPEs and TCs is Linux allowed to use? 0 means no limit. - */ -extern int tclimit; -extern int vpelimit; - -extern cpumask_t mt_fpu_cpumask; -extern unsigned long mt_fpemul_threshold; - -extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value); -extern void mips_mt_set_cpuoptions(void); - -struct class; -extern struct class *mt_class; - -#endif /* __ASM_MIPS_MT_H */ diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h deleted file mode 100644 index c9420aa97e32..000000000000 --- a/include/asm-mips/mipsmtregs.h +++ /dev/null @@ -1,395 +0,0 @@ -/* - * MT regs definitions, follows on from mipsregs.h - * Copyright (C) 2004 - 2005 MIPS Technologies, Inc. All rights reserved. - * Elizabeth Clarke et. al. - * - */ -#ifndef _ASM_MIPSMTREGS_H -#define _ASM_MIPSMTREGS_H - -#include -#include - -#ifndef __ASSEMBLY__ - -/* - * C macros - */ - -#define read_c0_mvpcontrol() __read_32bit_c0_register($0, 1) -#define write_c0_mvpcontrol(val) __write_32bit_c0_register($0, 1, val) - -#define read_c0_mvpconf0() __read_32bit_c0_register($0, 2) -#define read_c0_mvpconf1() __read_32bit_c0_register($0, 3) - -#define read_c0_vpecontrol() __read_32bit_c0_register($1, 1) -#define write_c0_vpecontrol(val) __write_32bit_c0_register($1, 1, val) - -#define read_c0_vpeconf0() __read_32bit_c0_register($1, 2) -#define write_c0_vpeconf0(val) __write_32bit_c0_register($1, 2, val) - -#define read_c0_tcstatus() __read_32bit_c0_register($2, 1) -#define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val) - -#define read_c0_tcbind() __read_32bit_c0_register($2, 2) - -#define read_c0_tccontext() __read_32bit_c0_register($2, 5) -#define write_c0_tccontext(val) __write_32bit_c0_register($2, 5, val) - -#else /* Assembly */ -/* - * Macros for use in assembly language code - */ - -#define CP0_MVPCONTROL $0, 1 -#define CP0_MVPCONF0 $0, 2 -#define CP0_MVPCONF1 $0, 3 -#define CP0_VPECONTROL $1, 1 -#define CP0_VPECONF0 $1, 2 -#define CP0_VPECONF1 $1, 3 -#define CP0_YQMASK $1, 4 -#define CP0_VPESCHEDULE $1, 5 -#define CP0_VPESCHEFBK $1, 6 -#define CP0_TCSTATUS $2, 1 -#define CP0_TCBIND $2, 2 -#define CP0_TCRESTART $2, 3 -#define CP0_TCHALT $2, 4 -#define CP0_TCCONTEXT $2, 5 -#define CP0_TCSCHEDULE $2, 6 -#define CP0_TCSCHEFBK $2, 7 -#define CP0_SRSCONF0 $6, 1 -#define CP0_SRSCONF1 $6, 2 -#define CP0_SRSCONF2 $6, 3 -#define CP0_SRSCONF3 $6, 4 -#define CP0_SRSCONF4 $6, 5 - -#endif - -/* MVPControl fields */ -#define MVPCONTROL_EVP (_ULCAST_(1)) - -#define MVPCONTROL_VPC_SHIFT 1 -#define MVPCONTROL_VPC (_ULCAST_(1) << MVPCONTROL_VPC_SHIFT) - -#define MVPCONTROL_STLB_SHIFT 2 -#define MVPCONTROL_STLB (_ULCAST_(1) << MVPCONTROL_STLB_SHIFT) - - -/* MVPConf0 fields */ -#define MVPCONF0_PTC_SHIFT 0 -#define MVPCONF0_PTC ( _ULCAST_(0xff)) -#define MVPCONF0_PVPE_SHIFT 10 -#define MVPCONF0_PVPE ( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT) -#define MVPCONF0_TCA_SHIFT 15 -#define MVPCONF0_TCA ( _ULCAST_(1) << MVPCONF0_TCA_SHIFT) -#define MVPCONF0_PTLBE_SHIFT 16 -#define MVPCONF0_PTLBE (_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT) -#define MVPCONF0_TLBS_SHIFT 29 -#define MVPCONF0_TLBS (_ULCAST_(1) << MVPCONF0_TLBS_SHIFT) -#define MVPCONF0_M_SHIFT 31 -#define MVPCONF0_M (_ULCAST_(0x1) << MVPCONF0_M_SHIFT) - - -/* config3 fields */ -#define CONFIG3_MT_SHIFT 2 -#define CONFIG3_MT (_ULCAST_(1) << CONFIG3_MT_SHIFT) - - -/* VPEControl fields (per VPE) */ -#define VPECONTROL_TARGTC (_ULCAST_(0xff)) - -#define VPECONTROL_TE_SHIFT 15 -#define VPECONTROL_TE (_ULCAST_(1) << VPECONTROL_TE_SHIFT) -#define VPECONTROL_EXCPT_SHIFT 16 -#define VPECONTROL_EXCPT (_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT) - -/* Thread Exception Codes for EXCPT field */ -#define THREX_TU 0 -#define THREX_TO 1 -#define THREX_IYQ 2 -#define THREX_GSX 3 -#define THREX_YSCH 4 -#define THREX_GSSCH 5 - -#define VPECONTROL_GSI_SHIFT 20 -#define VPECONTROL_GSI (_ULCAST_(1) << VPECONTROL_GSI_SHIFT) -#define VPECONTROL_YSI_SHIFT 21 -#define VPECONTROL_YSI (_ULCAST_(1) << VPECONTROL_YSI_SHIFT) - -/* VPEConf0 fields (per VPE) */ -#define VPECONF0_VPA_SHIFT 0 -#define VPECONF0_VPA (_ULCAST_(1) << VPECONF0_VPA_SHIFT) -#define VPECONF0_MVP_SHIFT 1 -#define VPECONF0_MVP (_ULCAST_(1) << VPECONF0_MVP_SHIFT) -#define VPECONF0_XTC_SHIFT 21 -#define VPECONF0_XTC (_ULCAST_(0xff) << VPECONF0_XTC_SHIFT) - -/* TCStatus fields (per TC) */ -#define TCSTATUS_TASID (_ULCAST_(0xff)) -#define TCSTATUS_IXMT_SHIFT 10 -#define TCSTATUS_IXMT (_ULCAST_(1) << TCSTATUS_IXMT_SHIFT) -#define TCSTATUS_TKSU_SHIFT 11 -#define TCSTATUS_TKSU (_ULCAST_(3) << TCSTATUS_TKSU_SHIFT) -#define TCSTATUS_A_SHIFT 13 -#define TCSTATUS_A (_ULCAST_(1) << TCSTATUS_A_SHIFT) -#define TCSTATUS_DA_SHIFT 15 -#define TCSTATUS_DA (_ULCAST_(1) << TCSTATUS_DA_SHIFT) -#define TCSTATUS_DT_SHIFT 20 -#define TCSTATUS_DT (_ULCAST_(1) << TCSTATUS_DT_SHIFT) -#define TCSTATUS_TDS_SHIFT 21 -#define TCSTATUS_TDS (_ULCAST_(1) << TCSTATUS_TDS_SHIFT) -#define TCSTATUS_TSST_SHIFT 22 -#define TCSTATUS_TSST (_ULCAST_(1) << TCSTATUS_TSST_SHIFT) -#define TCSTATUS_RNST_SHIFT 23 -#define TCSTATUS_RNST (_ULCAST_(3) << TCSTATUS_RNST_SHIFT) -/* Codes for RNST */ -#define TC_RUNNING 0 -#define TC_WAITING 1 -#define TC_YIELDING 2 -#define TC_GATED 3 - -#define TCSTATUS_TMX_SHIFT 27 -#define TCSTATUS_TMX (_ULCAST_(1) << TCSTATUS_TMX_SHIFT) -/* TCStatus TCU bits can use same definitions/offsets as CU bits in Status */ - -/* TCBind */ -#define TCBIND_CURVPE_SHIFT 0 -#define TCBIND_CURVPE (_ULCAST_(0xf)) - -#define TCBIND_CURTC_SHIFT 21 - -#define TCBIND_CURTC (_ULCAST_(0xff) << TCBIND_CURTC_SHIFT) - -/* TCHalt */ -#define TCHALT_H (_ULCAST_(1)) - -#ifndef __ASSEMBLY__ - -static inline unsigned int dvpe(void) -{ - int res = 0; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " .set noat \n" - " .set mips32r2 \n" - " .word 0x41610001 # dvpe $1 \n" - " move %0, $1 \n" - " ehb \n" - " .set pop \n" - : "=r" (res)); - - instruction_hazard(); - - return res; -} - -static inline void __raw_evpe(void) -{ - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " .set noat \n" - " .set mips32r2 \n" - " .word 0x41600021 # evpe \n" - " ehb \n" - " .set pop \n"); -} - -/* Enable virtual processor execution if previous suggested it should be. - EVPE_ENABLE to force */ - -#define EVPE_ENABLE MVPCONTROL_EVP - -static inline void evpe(int previous) -{ - if ((previous & MVPCONTROL_EVP)) - __raw_evpe(); -} - -static inline unsigned int dmt(void) -{ - int res; - - __asm__ __volatile__( - " .set push \n" - " .set mips32r2 \n" - " .set noat \n" - " .word 0x41610BC1 # dmt $1 \n" - " ehb \n" - " move %0, $1 \n" - " .set pop \n" - : "=r" (res)); - - instruction_hazard(); - - return res; -} - -static inline void __raw_emt(void) -{ - __asm__ __volatile__( - " .set noreorder \n" - " .set mips32r2 \n" - " .word 0x41600be1 # emt \n" - " ehb \n" - " .set mips0 \n" - " .set reorder"); -} - -/* enable multi-threaded execution if previous suggested it should be. - EMT_ENABLE to force */ - -#define EMT_ENABLE VPECONTROL_TE - -static inline void emt(int previous) -{ - if ((previous & EMT_ENABLE)) - __raw_emt(); -} - -static inline void ehb(void) -{ - __asm__ __volatile__( - " .set mips32r2 \n" - " ehb \n" - " .set mips0 \n"); -} - -#define mftc0(rt,sel) \ -({ \ - unsigned long __res; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set mips32r2 \n" \ - " .set noat \n" \ - " # mftc0 $1, $" #rt ", " #sel " \n" \ - " .word 0x41000800 | (" #rt " << 16) | " #sel " \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__res)); \ - \ - __res; \ -}) - -#define mftgpr(rt) \ -({ \ - unsigned long __res; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " .set mips32r2 \n" \ - " # mftgpr $1," #rt " \n" \ - " .word 0x41000820 | (" #rt " << 16) \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__res)); \ - \ - __res; \ -}) - -#define mftr(rt, u, sel) \ -({ \ - unsigned long __res; \ - \ - __asm__ __volatile__( \ - " mftr %0, " #rt ", " #u ", " #sel " \n" \ - : "=r" (__res)); \ - \ - __res; \ -}) - -#define mttgpr(rd,v) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set mips32r2 \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # mttgpr $1, " #rd " \n" \ - " .word 0x41810020 | (" #rd " << 11) \n" \ - " .set pop \n" \ - : : "r" (v)); \ -} while (0) - -#define mttc0(rd, sel, v) \ -({ \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set mips32r2 \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # mttc0 %0," #rd ", " #sel " \n" \ - " .word 0x41810000 | (" #rd " << 11) | " #sel " \n" \ - " .set pop \n" \ - : \ - : "r" (v)); \ -}) - - -#define mttr(rd, u, sel, v) \ -({ \ - __asm__ __volatile__( \ - "mttr %0," #rd ", " #u ", " #sel \ - : : "r" (v)); \ -}) - - -#define settc(tc) \ -do { \ - write_c0_vpecontrol((read_c0_vpecontrol()&~VPECONTROL_TARGTC) | (tc)); \ - ehb(); \ -} while (0) - - -/* you *must* set the target tc (settc) before trying to use these */ -#define read_vpe_c0_vpecontrol() mftc0(1, 1) -#define write_vpe_c0_vpecontrol(val) mttc0(1, 1, val) -#define read_vpe_c0_vpeconf0() mftc0(1, 2) -#define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val) -#define read_vpe_c0_count() mftc0(9, 0) -#define write_vpe_c0_count(val) mttc0(9, 0, val) -#define read_vpe_c0_status() mftc0(12, 0) -#define write_vpe_c0_status(val) mttc0(12, 0, val) -#define read_vpe_c0_cause() mftc0(13, 0) -#define write_vpe_c0_cause(val) mttc0(13, 0, val) -#define read_vpe_c0_config() mftc0(16, 0) -#define write_vpe_c0_config(val) mttc0(16, 0, val) -#define read_vpe_c0_config1() mftc0(16, 1) -#define write_vpe_c0_config1(val) mttc0(16, 1, val) -#define read_vpe_c0_config7() mftc0(16, 7) -#define write_vpe_c0_config7(val) mttc0(16, 7, val) -#define read_vpe_c0_ebase() mftc0(15, 1) -#define write_vpe_c0_ebase(val) mttc0(15, 1, val) -#define write_vpe_c0_compare(val) mttc0(11, 0, val) -#define read_vpe_c0_badvaddr() mftc0(8, 0) -#define read_vpe_c0_epc() mftc0(14, 0) -#define write_vpe_c0_epc(val) mttc0(14, 0, val) - - -/* TC */ -#define read_tc_c0_tcstatus() mftc0(2, 1) -#define write_tc_c0_tcstatus(val) mttc0(2, 1, val) -#define read_tc_c0_tcbind() mftc0(2, 2) -#define write_tc_c0_tcbind(val) mttc0(2, 2, val) -#define read_tc_c0_tcrestart() mftc0(2, 3) -#define write_tc_c0_tcrestart(val) mttc0(2, 3, val) -#define read_tc_c0_tchalt() mftc0(2, 4) -#define write_tc_c0_tchalt(val) mttc0(2, 4, val) -#define read_tc_c0_tccontext() mftc0(2, 5) -#define write_tc_c0_tccontext(val) mttc0(2, 5, val) - -/* GPR */ -#define read_tc_gpr_sp() mftgpr(29) -#define write_tc_gpr_sp(val) mttgpr(29, val) -#define read_tc_gpr_gp() mftgpr(28) -#define write_tc_gpr_gp(val) mttgpr(28, val) - -__BUILD_SET_C0(mvpcontrol) - -#endif /* Not __ASSEMBLY__ */ - -#endif diff --git a/include/asm-mips/mipsprom.h b/include/asm-mips/mipsprom.h deleted file mode 100644 index 146d41b67adc..000000000000 --- a/include/asm-mips/mipsprom.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef __ASM_MIPS_PROM_H -#define __ASM_MIPS_PROM_H - -#define PROM_RESET 0 -#define PROM_EXEC 1 -#define PROM_RESTART 2 -#define PROM_REINIT 3 -#define PROM_REBOOT 4 -#define PROM_AUTOBOOT 5 -#define PROM_OPEN 6 -#define PROM_READ 7 -#define PROM_WRITE 8 -#define PROM_IOCTL 9 -#define PROM_CLOSE 10 -#define PROM_GETCHAR 11 -#define PROM_PUTCHAR 12 -#define PROM_SHOWCHAR 13 /* XXX */ -#define PROM_GETS 14 /* XXX */ -#define PROM_PUTS 15 /* XXX */ -#define PROM_PRINTF 16 /* XXX */ - -/* What are these for? */ -#define PROM_INITPROTO 17 /* XXX */ -#define PROM_PROTOENABLE 18 /* XXX */ -#define PROM_PROTODISABLE 19 /* XXX */ -#define PROM_GETPKT 20 /* XXX */ -#define PROM_PUTPKT 21 /* XXX */ - -/* More PROM shit. Probably has to do with VME RMW cycles??? */ -#define PROM_ORW_RMW 22 /* XXX */ -#define PROM_ORH_RMW 23 /* XXX */ -#define PROM_ORB_RMW 24 /* XXX */ -#define PROM_ANDW_RMW 25 /* XXX */ -#define PROM_ANDH_RMW 26 /* XXX */ -#define PROM_ANDB_RMW 27 /* XXX */ - -/* Cache handling stuff */ -#define PROM_FLUSHCACHE 28 /* XXX */ -#define PROM_CLEARCACHE 29 /* XXX */ - -/* Libc alike stuff */ -#define PROM_SETJMP 30 /* XXX */ -#define PROM_LONGJMP 31 /* XXX */ -#define PROM_BEVUTLB 32 /* XXX */ -#define PROM_GETENV 33 /* XXX */ -#define PROM_SETENV 34 /* XXX */ -#define PROM_ATOB 35 /* XXX */ -#define PROM_STRCMP 36 /* XXX */ -#define PROM_STRLEN 37 /* XXX */ -#define PROM_STRCPY 38 /* XXX */ -#define PROM_STRCAT 39 /* XXX */ - -/* Misc stuff */ -#define PROM_PARSER 40 /* XXX */ -#define PROM_RANGE 41 /* XXX */ -#define PROM_ARGVIZE 42 /* XXX */ -#define PROM_HELP 43 /* XXX */ - -/* Entry points for some PROM commands */ -#define PROM_DUMPCMD 44 /* XXX */ -#define PROM_SETENVCMD 45 /* XXX */ -#define PROM_UNSETENVCMD 46 /* XXX */ -#define PROM_PRINTENVCMD 47 /* XXX */ -#define PROM_BEVEXCEPT 48 /* XXX */ -#define PROM_ENABLECMD 49 /* XXX */ -#define PROM_DISABLECMD 50 /* XXX */ - -#define PROM_CLEARNOFAULT 51 /* XXX */ -#define PROM_NOTIMPLEMENT 52 /* XXX */ - -#define PROM_NV_GET 53 /* XXX */ -#define PROM_NV_SET 54 /* XXX */ - -extern char *prom_getenv(char *); - -#endif /* __ASM_MIPS_PROM_H */ diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h deleted file mode 100644 index 979866000da4..000000000000 --- a/include/asm-mips/mipsregs.h +++ /dev/null @@ -1,1526 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle - * Copyright (C) 2000 Silicon Graphics, Inc. - * Modified for further R[236]000 support by Paul M. Antoine, 1996. - * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000, 07 MIPS Technologies, Inc. - * Copyright (C) 2003, 2004 Maciej W. Rozycki - */ -#ifndef _ASM_MIPSREGS_H -#define _ASM_MIPSREGS_H - -#include -#include -#include - -/* - * The following macros are especially useful for __asm__ - * inline assembler. - */ -#ifndef __STR -#define __STR(x) #x -#endif -#ifndef STR -#define STR(x) __STR(x) -#endif - -/* - * Configure language - */ -#ifdef __ASSEMBLY__ -#define _ULCAST_ -#else -#define _ULCAST_ (unsigned long) -#endif - -/* - * Coprocessor 0 register names - */ -#define CP0_INDEX $0 -#define CP0_RANDOM $1 -#define CP0_ENTRYLO0 $2 -#define CP0_ENTRYLO1 $3 -#define CP0_CONF $3 -#define CP0_CONTEXT $4 -#define CP0_PAGEMASK $5 -#define CP0_WIRED $6 -#define CP0_INFO $7 -#define CP0_BADVADDR $8 -#define CP0_COUNT $9 -#define CP0_ENTRYHI $10 -#define CP0_COMPARE $11 -#define CP0_STATUS $12 -#define CP0_CAUSE $13 -#define CP0_EPC $14 -#define CP0_PRID $15 -#define CP0_CONFIG $16 -#define CP0_LLADDR $17 -#define CP0_WATCHLO $18 -#define CP0_WATCHHI $19 -#define CP0_XCONTEXT $20 -#define CP0_FRAMEMASK $21 -#define CP0_DIAGNOSTIC $22 -#define CP0_DEBUG $23 -#define CP0_DEPC $24 -#define CP0_PERFORMANCE $25 -#define CP0_ECC $26 -#define CP0_CACHEERR $27 -#define CP0_TAGLO $28 -#define CP0_TAGHI $29 -#define CP0_ERROREPC $30 -#define CP0_DESAVE $31 - -/* - * R4640/R4650 cp0 register names. These registers are listed - * here only for completeness; without MMU these CPUs are not useable - * by Linux. A future ELKS port might take make Linux run on them - * though ... - */ -#define CP0_IBASE $0 -#define CP0_IBOUND $1 -#define CP0_DBASE $2 -#define CP0_DBOUND $3 -#define CP0_CALG $17 -#define CP0_IWATCH $18 -#define CP0_DWATCH $19 - -/* - * Coprocessor 0 Set 1 register names - */ -#define CP0_S1_DERRADDR0 $26 -#define CP0_S1_DERRADDR1 $27 -#define CP0_S1_INTCONTROL $20 - -/* - * Coprocessor 0 Set 2 register names - */ -#define CP0_S2_SRSCTL $12 /* MIPSR2 */ - -/* - * Coprocessor 0 Set 3 register names - */ -#define CP0_S3_SRSMAP $12 /* MIPSR2 */ - -/* - * TX39 Series - */ -#define CP0_TX39_CACHE $7 - -/* - * Coprocessor 1 (FPU) register names - */ -#define CP1_REVISION $0 -#define CP1_STATUS $31 - -/* - * FPU Status Register Values - */ -/* - * Status Register Values - */ - -#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ -#define FPU_CSR_COND 0x00800000 /* $fcc0 */ -#define FPU_CSR_COND0 0x00800000 /* $fcc0 */ -#define FPU_CSR_COND1 0x02000000 /* $fcc1 */ -#define FPU_CSR_COND2 0x04000000 /* $fcc2 */ -#define FPU_CSR_COND3 0x08000000 /* $fcc3 */ -#define FPU_CSR_COND4 0x10000000 /* $fcc4 */ -#define FPU_CSR_COND5 0x20000000 /* $fcc5 */ -#define FPU_CSR_COND6 0x40000000 /* $fcc6 */ -#define FPU_CSR_COND7 0x80000000 /* $fcc7 */ - -/* - * X the exception cause indicator - * E the exception enable - * S the sticky/flag bit -*/ -#define FPU_CSR_ALL_X 0x0003f000 -#define FPU_CSR_UNI_X 0x00020000 -#define FPU_CSR_INV_X 0x00010000 -#define FPU_CSR_DIV_X 0x00008000 -#define FPU_CSR_OVF_X 0x00004000 -#define FPU_CSR_UDF_X 0x00002000 -#define FPU_CSR_INE_X 0x00001000 - -#define FPU_CSR_ALL_E 0x00000f80 -#define FPU_CSR_INV_E 0x00000800 -#define FPU_CSR_DIV_E 0x00000400 -#define FPU_CSR_OVF_E 0x00000200 -#define FPU_CSR_UDF_E 0x00000100 -#define FPU_CSR_INE_E 0x00000080 - -#define FPU_CSR_ALL_S 0x0000007c -#define FPU_CSR_INV_S 0x00000040 -#define FPU_CSR_DIV_S 0x00000020 -#define FPU_CSR_OVF_S 0x00000010 -#define FPU_CSR_UDF_S 0x00000008 -#define FPU_CSR_INE_S 0x00000004 - -/* rounding mode */ -#define FPU_CSR_RN 0x0 /* nearest */ -#define FPU_CSR_RZ 0x1 /* towards zero */ -#define FPU_CSR_RU 0x2 /* towards +Infinity */ -#define FPU_CSR_RD 0x3 /* towards -Infinity */ - - -/* - * Values for PageMask register - */ -#ifdef CONFIG_CPU_VR41XX - -/* Why doesn't stupidity hurt ... */ - -#define PM_1K 0x00000000 -#define PM_4K 0x00001800 -#define PM_16K 0x00007800 -#define PM_64K 0x0001f800 -#define PM_256K 0x0007f800 - -#else - -#define PM_4K 0x00000000 -#define PM_16K 0x00006000 -#define PM_64K 0x0001e000 -#define PM_256K 0x0007e000 -#define PM_1M 0x001fe000 -#define PM_4M 0x007fe000 -#define PM_16M 0x01ffe000 -#define PM_64M 0x07ffe000 -#define PM_256M 0x1fffe000 - -#endif - -/* - * Default page size for a given kernel configuration - */ -#ifdef CONFIG_PAGE_SIZE_4KB -#define PM_DEFAULT_MASK PM_4K -#elif defined(CONFIG_PAGE_SIZE_16KB) -#define PM_DEFAULT_MASK PM_16K -#elif defined(CONFIG_PAGE_SIZE_64KB) -#define PM_DEFAULT_MASK PM_64K -#else -#error Bad page size configuration! -#endif - - -/* - * Values used for computation of new tlb entries - */ -#define PL_4K 12 -#define PL_16K 14 -#define PL_64K 16 -#define PL_256K 18 -#define PL_1M 20 -#define PL_4M 22 -#define PL_16M 24 -#define PL_64M 26 -#define PL_256M 28 - -/* - * R4x00 interrupt enable / cause bits - */ -#define IE_SW0 (_ULCAST_(1) << 8) -#define IE_SW1 (_ULCAST_(1) << 9) -#define IE_IRQ0 (_ULCAST_(1) << 10) -#define IE_IRQ1 (_ULCAST_(1) << 11) -#define IE_IRQ2 (_ULCAST_(1) << 12) -#define IE_IRQ3 (_ULCAST_(1) << 13) -#define IE_IRQ4 (_ULCAST_(1) << 14) -#define IE_IRQ5 (_ULCAST_(1) << 15) - -/* - * R4x00 interrupt cause bits - */ -#define C_SW0 (_ULCAST_(1) << 8) -#define C_SW1 (_ULCAST_(1) << 9) -#define C_IRQ0 (_ULCAST_(1) << 10) -#define C_IRQ1 (_ULCAST_(1) << 11) -#define C_IRQ2 (_ULCAST_(1) << 12) -#define C_IRQ3 (_ULCAST_(1) << 13) -#define C_IRQ4 (_ULCAST_(1) << 14) -#define C_IRQ5 (_ULCAST_(1) << 15) - -/* - * Bitfields in the R4xx0 cp0 status register - */ -#define ST0_IE 0x00000001 -#define ST0_EXL 0x00000002 -#define ST0_ERL 0x00000004 -#define ST0_KSU 0x00000018 -# define KSU_USER 0x00000010 -# define KSU_SUPERVISOR 0x00000008 -# define KSU_KERNEL 0x00000000 -#define ST0_UX 0x00000020 -#define ST0_SX 0x00000040 -#define ST0_KX 0x00000080 -#define ST0_DE 0x00010000 -#define ST0_CE 0x00020000 - -/* - * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate - * cacheops in userspace. This bit exists only on RM7000 and RM9000 - * processors. - */ -#define ST0_CO 0x08000000 - -/* - * Bitfields in the R[23]000 cp0 status register. - */ -#define ST0_IEC 0x00000001 -#define ST0_KUC 0x00000002 -#define ST0_IEP 0x00000004 -#define ST0_KUP 0x00000008 -#define ST0_IEO 0x00000010 -#define ST0_KUO 0x00000020 -/* bits 6 & 7 are reserved on R[23]000 */ -#define ST0_ISC 0x00010000 -#define ST0_SWC 0x00020000 -#define ST0_CM 0x00080000 - -/* - * Bits specific to the R4640/R4650 - */ -#define ST0_UM (_ULCAST_(1) << 4) -#define ST0_IL (_ULCAST_(1) << 23) -#define ST0_DL (_ULCAST_(1) << 24) - -/* - * Enable the MIPS MDMX and DSP ASEs - */ -#define ST0_MX 0x01000000 - -/* - * Bitfields in the TX39 family CP0 Configuration Register 3 - */ -#define TX39_CONF_ICS_SHIFT 19 -#define TX39_CONF_ICS_MASK 0x00380000 -#define TX39_CONF_ICS_1KB 0x00000000 -#define TX39_CONF_ICS_2KB 0x00080000 -#define TX39_CONF_ICS_4KB 0x00100000 -#define TX39_CONF_ICS_8KB 0x00180000 -#define TX39_CONF_ICS_16KB 0x00200000 - -#define TX39_CONF_DCS_SHIFT 16 -#define TX39_CONF_DCS_MASK 0x00070000 -#define TX39_CONF_DCS_1KB 0x00000000 -#define TX39_CONF_DCS_2KB 0x00010000 -#define TX39_CONF_DCS_4KB 0x00020000 -#define TX39_CONF_DCS_8KB 0x00030000 -#define TX39_CONF_DCS_16KB 0x00040000 - -#define TX39_CONF_CWFON 0x00004000 -#define TX39_CONF_WBON 0x00002000 -#define TX39_CONF_RF_SHIFT 10 -#define TX39_CONF_RF_MASK 0x00000c00 -#define TX39_CONF_DOZE 0x00000200 -#define TX39_CONF_HALT 0x00000100 -#define TX39_CONF_LOCK 0x00000080 -#define TX39_CONF_ICE 0x00000020 -#define TX39_CONF_DCE 0x00000010 -#define TX39_CONF_IRSIZE_SHIFT 2 -#define TX39_CONF_IRSIZE_MASK 0x0000000c -#define TX39_CONF_DRSIZE_SHIFT 0 -#define TX39_CONF_DRSIZE_MASK 0x00000003 - -/* - * Status register bits available in all MIPS CPUs. - */ -#define ST0_IM 0x0000ff00 -#define STATUSB_IP0 8 -#define STATUSF_IP0 (_ULCAST_(1) << 8) -#define STATUSB_IP1 9 -#define STATUSF_IP1 (_ULCAST_(1) << 9) -#define STATUSB_IP2 10 -#define STATUSF_IP2 (_ULCAST_(1) << 10) -#define STATUSB_IP3 11 -#define STATUSF_IP3 (_ULCAST_(1) << 11) -#define STATUSB_IP4 12 -#define STATUSF_IP4 (_ULCAST_(1) << 12) -#define STATUSB_IP5 13 -#define STATUSF_IP5 (_ULCAST_(1) << 13) -#define STATUSB_IP6 14 -#define STATUSF_IP6 (_ULCAST_(1) << 14) -#define STATUSB_IP7 15 -#define STATUSF_IP7 (_ULCAST_(1) << 15) -#define STATUSB_IP8 0 -#define STATUSF_IP8 (_ULCAST_(1) << 0) -#define STATUSB_IP9 1 -#define STATUSF_IP9 (_ULCAST_(1) << 1) -#define STATUSB_IP10 2 -#define STATUSF_IP10 (_ULCAST_(1) << 2) -#define STATUSB_IP11 3 -#define STATUSF_IP11 (_ULCAST_(1) << 3) -#define STATUSB_IP12 4 -#define STATUSF_IP12 (_ULCAST_(1) << 4) -#define STATUSB_IP13 5 -#define STATUSF_IP13 (_ULCAST_(1) << 5) -#define STATUSB_IP14 6 -#define STATUSF_IP14 (_ULCAST_(1) << 6) -#define STATUSB_IP15 7 -#define STATUSF_IP15 (_ULCAST_(1) << 7) -#define ST0_CH 0x00040000 -#define ST0_SR 0x00100000 -#define ST0_TS 0x00200000 -#define ST0_BEV 0x00400000 -#define ST0_RE 0x02000000 -#define ST0_FR 0x04000000 -#define ST0_CU 0xf0000000 -#define ST0_CU0 0x10000000 -#define ST0_CU1 0x20000000 -#define ST0_CU2 0x40000000 -#define ST0_CU3 0x80000000 -#define ST0_XX 0x80000000 /* MIPS IV naming */ - -/* - * Bitfields and bit numbers in the coprocessor 0 cause register. - * - * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. - */ -#define CAUSEB_EXCCODE 2 -#define CAUSEF_EXCCODE (_ULCAST_(31) << 2) -#define CAUSEB_IP 8 -#define CAUSEF_IP (_ULCAST_(255) << 8) -#define CAUSEB_IP0 8 -#define CAUSEF_IP0 (_ULCAST_(1) << 8) -#define CAUSEB_IP1 9 -#define CAUSEF_IP1 (_ULCAST_(1) << 9) -#define CAUSEB_IP2 10 -#define CAUSEF_IP2 (_ULCAST_(1) << 10) -#define CAUSEB_IP3 11 -#define CAUSEF_IP3 (_ULCAST_(1) << 11) -#define CAUSEB_IP4 12 -#define CAUSEF_IP4 (_ULCAST_(1) << 12) -#define CAUSEB_IP5 13 -#define CAUSEF_IP5 (_ULCAST_(1) << 13) -#define CAUSEB_IP6 14 -#define CAUSEF_IP6 (_ULCAST_(1) << 14) -#define CAUSEB_IP7 15 -#define CAUSEF_IP7 (_ULCAST_(1) << 15) -#define CAUSEB_IV 23 -#define CAUSEF_IV (_ULCAST_(1) << 23) -#define CAUSEB_CE 28 -#define CAUSEF_CE (_ULCAST_(3) << 28) -#define CAUSEB_BD 31 -#define CAUSEF_BD (_ULCAST_(1) << 31) - -/* - * Bits in the coprocessor 0 config register. - */ -/* Generic bits. */ -#define CONF_CM_CACHABLE_NO_WA 0 -#define CONF_CM_CACHABLE_WA 1 -#define CONF_CM_UNCACHED 2 -#define CONF_CM_CACHABLE_NONCOHERENT 3 -#define CONF_CM_CACHABLE_CE 4 -#define CONF_CM_CACHABLE_COW 5 -#define CONF_CM_CACHABLE_CUW 6 -#define CONF_CM_CACHABLE_ACCELERATED 7 -#define CONF_CM_CMASK 7 -#define CONF_BE (_ULCAST_(1) << 15) - -/* Bits common to various processors. */ -#define CONF_CU (_ULCAST_(1) << 3) -#define CONF_DB (_ULCAST_(1) << 4) -#define CONF_IB (_ULCAST_(1) << 5) -#define CONF_DC (_ULCAST_(7) << 6) -#define CONF_IC (_ULCAST_(7) << 9) -#define CONF_EB (_ULCAST_(1) << 13) -#define CONF_EM (_ULCAST_(1) << 14) -#define CONF_SM (_ULCAST_(1) << 16) -#define CONF_SC (_ULCAST_(1) << 17) -#define CONF_EW (_ULCAST_(3) << 18) -#define CONF_EP (_ULCAST_(15)<< 24) -#define CONF_EC (_ULCAST_(7) << 28) -#define CONF_CM (_ULCAST_(1) << 31) - -/* Bits specific to the R4xx0. */ -#define R4K_CONF_SW (_ULCAST_(1) << 20) -#define R4K_CONF_SS (_ULCAST_(1) << 21) -#define R4K_CONF_SB (_ULCAST_(3) << 22) - -/* Bits specific to the R5000. */ -#define R5K_CONF_SE (_ULCAST_(1) << 12) -#define R5K_CONF_SS (_ULCAST_(3) << 20) - -/* Bits specific to the RM7000. */ -#define RM7K_CONF_SE (_ULCAST_(1) << 3) -#define RM7K_CONF_TE (_ULCAST_(1) << 12) -#define RM7K_CONF_CLK (_ULCAST_(1) << 16) -#define RM7K_CONF_TC (_ULCAST_(1) << 17) -#define RM7K_CONF_SI (_ULCAST_(3) << 20) -#define RM7K_CONF_SC (_ULCAST_(1) << 31) - -/* Bits specific to the R10000. */ -#define R10K_CONF_DN (_ULCAST_(3) << 3) -#define R10K_CONF_CT (_ULCAST_(1) << 5) -#define R10K_CONF_PE (_ULCAST_(1) << 6) -#define R10K_CONF_PM (_ULCAST_(3) << 7) -#define R10K_CONF_EC (_ULCAST_(15)<< 9) -#define R10K_CONF_SB (_ULCAST_(1) << 13) -#define R10K_CONF_SK (_ULCAST_(1) << 14) -#define R10K_CONF_SS (_ULCAST_(7) << 16) -#define R10K_CONF_SC (_ULCAST_(7) << 19) -#define R10K_CONF_DC (_ULCAST_(7) << 26) -#define R10K_CONF_IC (_ULCAST_(7) << 29) - -/* Bits specific to the VR41xx. */ -#define VR41_CONF_CS (_ULCAST_(1) << 12) -#define VR41_CONF_P4K (_ULCAST_(1) << 13) -#define VR41_CONF_BP (_ULCAST_(1) << 16) -#define VR41_CONF_M16 (_ULCAST_(1) << 20) -#define VR41_CONF_AD (_ULCAST_(1) << 23) - -/* Bits specific to the R30xx. */ -#define R30XX_CONF_FDM (_ULCAST_(1) << 19) -#define R30XX_CONF_REV (_ULCAST_(1) << 22) -#define R30XX_CONF_AC (_ULCAST_(1) << 23) -#define R30XX_CONF_RF (_ULCAST_(1) << 24) -#define R30XX_CONF_HALT (_ULCAST_(1) << 25) -#define R30XX_CONF_FPINT (_ULCAST_(7) << 26) -#define R30XX_CONF_DBR (_ULCAST_(1) << 29) -#define R30XX_CONF_SB (_ULCAST_(1) << 30) -#define R30XX_CONF_LOCK (_ULCAST_(1) << 31) - -/* Bits specific to the TX49. */ -#define TX49_CONF_DC (_ULCAST_(1) << 16) -#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */ -#define TX49_CONF_HALT (_ULCAST_(1) << 18) -#define TX49_CONF_CWFON (_ULCAST_(1) << 27) - -/* Bits specific to the MIPS32/64 PRA. */ -#define MIPS_CONF_MT (_ULCAST_(7) << 7) -#define MIPS_CONF_AR (_ULCAST_(7) << 10) -#define MIPS_CONF_AT (_ULCAST_(3) << 13) -#define MIPS_CONF_M (_ULCAST_(1) << 31) - -/* - * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above. - */ -#define MIPS_CONF1_FP (_ULCAST_(1) << 0) -#define MIPS_CONF1_EP (_ULCAST_(1) << 1) -#define MIPS_CONF1_CA (_ULCAST_(1) << 2) -#define MIPS_CONF1_WR (_ULCAST_(1) << 3) -#define MIPS_CONF1_PC (_ULCAST_(1) << 4) -#define MIPS_CONF1_MD (_ULCAST_(1) << 5) -#define MIPS_CONF1_C2 (_ULCAST_(1) << 6) -#define MIPS_CONF1_DA (_ULCAST_(7) << 7) -#define MIPS_CONF1_DL (_ULCAST_(7) << 10) -#define MIPS_CONF1_DS (_ULCAST_(7) << 13) -#define MIPS_CONF1_IA (_ULCAST_(7) << 16) -#define MIPS_CONF1_IL (_ULCAST_(7) << 19) -#define MIPS_CONF1_IS (_ULCAST_(7) << 22) -#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25) - -#define MIPS_CONF2_SA (_ULCAST_(15)<< 0) -#define MIPS_CONF2_SL (_ULCAST_(15)<< 4) -#define MIPS_CONF2_SS (_ULCAST_(15)<< 8) -#define MIPS_CONF2_SU (_ULCAST_(15)<< 12) -#define MIPS_CONF2_TA (_ULCAST_(15)<< 16) -#define MIPS_CONF2_TL (_ULCAST_(15)<< 20) -#define MIPS_CONF2_TS (_ULCAST_(15)<< 24) -#define MIPS_CONF2_TU (_ULCAST_(7) << 28) - -#define MIPS_CONF3_TL (_ULCAST_(1) << 0) -#define MIPS_CONF3_SM (_ULCAST_(1) << 1) -#define MIPS_CONF3_MT (_ULCAST_(1) << 2) -#define MIPS_CONF3_SP (_ULCAST_(1) << 4) -#define MIPS_CONF3_VINT (_ULCAST_(1) << 5) -#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6) -#define MIPS_CONF3_LPA (_ULCAST_(1) << 7) -#define MIPS_CONF3_DSP (_ULCAST_(1) << 10) -#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13) - -#define MIPS_CONF7_WII (_ULCAST_(1) << 31) - -#define MIPS_CONF7_RPS (_ULCAST_(1) << 2) - - -/* - * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register. - */ -#define MIPS_FPIR_S (_ULCAST_(1) << 16) -#define MIPS_FPIR_D (_ULCAST_(1) << 17) -#define MIPS_FPIR_PS (_ULCAST_(1) << 18) -#define MIPS_FPIR_3D (_ULCAST_(1) << 19) -#define MIPS_FPIR_W (_ULCAST_(1) << 20) -#define MIPS_FPIR_L (_ULCAST_(1) << 21) -#define MIPS_FPIR_F64 (_ULCAST_(1) << 22) - -#ifndef __ASSEMBLY__ - -/* - * Functions to access the R10000 performance counters. These are basically - * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit - * performance counter number encoded into bits 1 ... 5 of the instruction. - * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware - * disassembler these will look like an access to sel 0 or 1. - */ -#define read_r10k_perf_cntr(counter) \ -({ \ - unsigned int __res; \ - __asm__ __volatile__( \ - "mfpc\t%0, %1" \ - : "=r" (__res) \ - : "i" (counter)); \ - \ - __res; \ -}) - -#define write_r10k_perf_cntr(counter,val) \ -do { \ - __asm__ __volatile__( \ - "mtpc\t%0, %1" \ - : \ - : "r" (val), "i" (counter)); \ -} while (0) - -#define read_r10k_perf_event(counter) \ -({ \ - unsigned int __res; \ - __asm__ __volatile__( \ - "mfps\t%0, %1" \ - : "=r" (__res) \ - : "i" (counter)); \ - \ - __res; \ -}) - -#define write_r10k_perf_cntl(counter,val) \ -do { \ - __asm__ __volatile__( \ - "mtps\t%0, %1" \ - : \ - : "r" (val), "i" (counter)); \ -} while (0) - - -/* - * Macros to access the system control coprocessor - */ - -#define __read_32bit_c0_register(source, sel) \ -({ int __res; \ - if (sel == 0) \ - __asm__ __volatile__( \ - "mfc0\t%0, " #source "\n\t" \ - : "=r" (__res)); \ - else \ - __asm__ __volatile__( \ - ".set\tmips32\n\t" \ - "mfc0\t%0, " #source ", " #sel "\n\t" \ - ".set\tmips0\n\t" \ - : "=r" (__res)); \ - __res; \ -}) - -#define __read_64bit_c0_register(source, sel) \ -({ unsigned long long __res; \ - if (sizeof(unsigned long) == 4) \ - __res = __read_64bit_c0_split(source, sel); \ - else if (sel == 0) \ - __asm__ __volatile__( \ - ".set\tmips3\n\t" \ - "dmfc0\t%0, " #source "\n\t" \ - ".set\tmips0" \ - : "=r" (__res)); \ - else \ - __asm__ __volatile__( \ - ".set\tmips64\n\t" \ - "dmfc0\t%0, " #source ", " #sel "\n\t" \ - ".set\tmips0" \ - : "=r" (__res)); \ - __res; \ -}) - -#define __write_32bit_c0_register(register, sel, value) \ -do { \ - if (sel == 0) \ - __asm__ __volatile__( \ - "mtc0\t%z0, " #register "\n\t" \ - : : "Jr" ((unsigned int)(value))); \ - else \ - __asm__ __volatile__( \ - ".set\tmips32\n\t" \ - "mtc0\t%z0, " #register ", " #sel "\n\t" \ - ".set\tmips0" \ - : : "Jr" ((unsigned int)(value))); \ -} while (0) - -#define __write_64bit_c0_register(register, sel, value) \ -do { \ - if (sizeof(unsigned long) == 4) \ - __write_64bit_c0_split(register, sel, value); \ - else if (sel == 0) \ - __asm__ __volatile__( \ - ".set\tmips3\n\t" \ - "dmtc0\t%z0, " #register "\n\t" \ - ".set\tmips0" \ - : : "Jr" (value)); \ - else \ - __asm__ __volatile__( \ - ".set\tmips64\n\t" \ - "dmtc0\t%z0, " #register ", " #sel "\n\t" \ - ".set\tmips0" \ - : : "Jr" (value)); \ -} while (0) - -#define __read_ulong_c0_register(reg, sel) \ - ((sizeof(unsigned long) == 4) ? \ - (unsigned long) __read_32bit_c0_register(reg, sel) : \ - (unsigned long) __read_64bit_c0_register(reg, sel)) - -#define __write_ulong_c0_register(reg, sel, val) \ -do { \ - if (sizeof(unsigned long) == 4) \ - __write_32bit_c0_register(reg, sel, val); \ - else \ - __write_64bit_c0_register(reg, sel, val); \ -} while (0) - -/* - * On RM7000/RM9000 these are uses to access cop0 set 1 registers - */ -#define __read_32bit_c0_ctrl_register(source) \ -({ int __res; \ - __asm__ __volatile__( \ - "cfc0\t%0, " #source "\n\t" \ - : "=r" (__res)); \ - __res; \ -}) - -#define __write_32bit_c0_ctrl_register(register, value) \ -do { \ - __asm__ __volatile__( \ - "ctc0\t%z0, " #register "\n\t" \ - : : "Jr" ((unsigned int)(value))); \ -} while (0) - -/* - * These versions are only needed for systems with more than 38 bits of - * physical address space running the 32-bit kernel. That's none atm :-) - */ -#define __read_64bit_c0_split(source, sel) \ -({ \ - unsigned long long __val; \ - unsigned long __flags; \ - \ - local_irq_save(__flags); \ - if (sel == 0) \ - __asm__ __volatile__( \ - ".set\tmips64\n\t" \ - "dmfc0\t%M0, " #source "\n\t" \ - "dsll\t%L0, %M0, 32\n\t" \ - "dsrl\t%M0, %M0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ - ".set\tmips0" \ - : "=r" (__val)); \ - else \ - __asm__ __volatile__( \ - ".set\tmips64\n\t" \ - "dmfc0\t%M0, " #source ", " #sel "\n\t" \ - "dsll\t%L0, %M0, 32\n\t" \ - "dsrl\t%M0, %M0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ - ".set\tmips0" \ - : "=r" (__val)); \ - local_irq_restore(__flags); \ - \ - __val; \ -}) - -#define __write_64bit_c0_split(source, sel, val) \ -do { \ - unsigned long __flags; \ - \ - local_irq_save(__flags); \ - if (sel == 0) \ - __asm__ __volatile__( \ - ".set\tmips64\n\t" \ - "dsll\t%L0, %L0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ - "dsll\t%M0, %M0, 32\n\t" \ - "or\t%L0, %L0, %M0\n\t" \ - "dmtc0\t%L0, " #source "\n\t" \ - ".set\tmips0" \ - : : "r" (val)); \ - else \ - __asm__ __volatile__( \ - ".set\tmips64\n\t" \ - "dsll\t%L0, %L0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ - "dsll\t%M0, %M0, 32\n\t" \ - "or\t%L0, %L0, %M0\n\t" \ - "dmtc0\t%L0, " #source ", " #sel "\n\t" \ - ".set\tmips0" \ - : : "r" (val)); \ - local_irq_restore(__flags); \ -} while (0) - -#define read_c0_index() __read_32bit_c0_register($0, 0) -#define write_c0_index(val) __write_32bit_c0_register($0, 0, val) - -#define read_c0_random() __read_32bit_c0_register($1, 0) -#define write_c0_random(val) __write_32bit_c0_register($1, 0, val) - -#define read_c0_entrylo0() __read_ulong_c0_register($2, 0) -#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val) - -#define read_c0_entrylo1() __read_ulong_c0_register($3, 0) -#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val) - -#define read_c0_conf() __read_32bit_c0_register($3, 0) -#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val) - -#define read_c0_context() __read_ulong_c0_register($4, 0) -#define write_c0_context(val) __write_ulong_c0_register($4, 0, val) - -#define read_c0_userlocal() __read_ulong_c0_register($4, 2) -#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val) - -#define read_c0_pagemask() __read_32bit_c0_register($5, 0) -#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) - -#define read_c0_wired() __read_32bit_c0_register($6, 0) -#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val) - -#define read_c0_info() __read_32bit_c0_register($7, 0) - -#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */ -#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val) - -#define read_c0_badvaddr() __read_ulong_c0_register($8, 0) -#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val) - -#define read_c0_count() __read_32bit_c0_register($9, 0) -#define write_c0_count(val) __write_32bit_c0_register($9, 0, val) - -#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */ -#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val) - -#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */ -#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val) - -#define read_c0_entryhi() __read_ulong_c0_register($10, 0) -#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val) - -#define read_c0_compare() __read_32bit_c0_register($11, 0) -#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val) - -#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */ -#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val) - -#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */ -#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val) - -#define read_c0_status() __read_32bit_c0_register($12, 0) -#ifdef CONFIG_MIPS_MT_SMTC -#define write_c0_status(val) \ -do { \ - __write_32bit_c0_register($12, 0, val); \ - __ehb(); \ -} while (0) -#else -/* - * Legacy non-SMTC code, which may be hazardous - * but which might not support EHB - */ -#define write_c0_status(val) __write_32bit_c0_register($12, 0, val) -#endif /* CONFIG_MIPS_MT_SMTC */ - -#define read_c0_cause() __read_32bit_c0_register($13, 0) -#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val) - -#define read_c0_epc() __read_ulong_c0_register($14, 0) -#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val) - -#define read_c0_prid() __read_32bit_c0_register($15, 0) - -#define read_c0_config() __read_32bit_c0_register($16, 0) -#define read_c0_config1() __read_32bit_c0_register($16, 1) -#define read_c0_config2() __read_32bit_c0_register($16, 2) -#define read_c0_config3() __read_32bit_c0_register($16, 3) -#define read_c0_config4() __read_32bit_c0_register($16, 4) -#define read_c0_config5() __read_32bit_c0_register($16, 5) -#define read_c0_config6() __read_32bit_c0_register($16, 6) -#define read_c0_config7() __read_32bit_c0_register($16, 7) -#define write_c0_config(val) __write_32bit_c0_register($16, 0, val) -#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val) -#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val) -#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val) -#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val) -#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val) -#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val) -#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val) - -/* - * The WatchLo register. There may be upto 8 of them. - */ -#define read_c0_watchlo0() __read_ulong_c0_register($18, 0) -#define read_c0_watchlo1() __read_ulong_c0_register($18, 1) -#define read_c0_watchlo2() __read_ulong_c0_register($18, 2) -#define read_c0_watchlo3() __read_ulong_c0_register($18, 3) -#define read_c0_watchlo4() __read_ulong_c0_register($18, 4) -#define read_c0_watchlo5() __read_ulong_c0_register($18, 5) -#define read_c0_watchlo6() __read_ulong_c0_register($18, 6) -#define read_c0_watchlo7() __read_ulong_c0_register($18, 7) -#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val) -#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val) -#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val) -#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val) -#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val) -#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val) -#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val) -#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val) - -/* - * The WatchHi register. There may be upto 8 of them. - */ -#define read_c0_watchhi0() __read_32bit_c0_register($19, 0) -#define read_c0_watchhi1() __read_32bit_c0_register($19, 1) -#define read_c0_watchhi2() __read_32bit_c0_register($19, 2) -#define read_c0_watchhi3() __read_32bit_c0_register($19, 3) -#define read_c0_watchhi4() __read_32bit_c0_register($19, 4) -#define read_c0_watchhi5() __read_32bit_c0_register($19, 5) -#define read_c0_watchhi6() __read_32bit_c0_register($19, 6) -#define read_c0_watchhi7() __read_32bit_c0_register($19, 7) - -#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val) -#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val) -#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val) -#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val) -#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val) -#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val) -#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val) -#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val) - -#define read_c0_xcontext() __read_ulong_c0_register($20, 0) -#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val) - -#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20) -#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val) - -#define read_c0_framemask() __read_32bit_c0_register($21, 0) -#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val) - -/* RM9000 PerfControl performance counter control register */ -#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0) -#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val) - -#define read_c0_diag() __read_32bit_c0_register($22, 0) -#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val) - -#define read_c0_diag1() __read_32bit_c0_register($22, 1) -#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val) - -#define read_c0_diag2() __read_32bit_c0_register($22, 2) -#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val) - -#define read_c0_diag3() __read_32bit_c0_register($22, 3) -#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val) - -#define read_c0_diag4() __read_32bit_c0_register($22, 4) -#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val) - -#define read_c0_diag5() __read_32bit_c0_register($22, 5) -#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val) - -#define read_c0_debug() __read_32bit_c0_register($23, 0) -#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val) - -#define read_c0_depc() __read_ulong_c0_register($24, 0) -#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val) - -/* - * MIPS32 / MIPS64 performance counters - */ -#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0) -#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val) -#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1) -#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val) -#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2) -#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val) -#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3) -#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val) -#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4) -#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val) -#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5) -#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val) -#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6) -#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val) -#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7) -#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val) - -/* RM9000 PerfCount performance counter register */ -#define read_c0_perfcount() __read_64bit_c0_register($25, 0) -#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val) - -#define read_c0_ecc() __read_32bit_c0_register($26, 0) -#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val) - -#define read_c0_derraddr0() __read_ulong_c0_register($26, 1) -#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val) - -#define read_c0_cacheerr() __read_32bit_c0_register($27, 0) - -#define read_c0_derraddr1() __read_ulong_c0_register($27, 1) -#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val) - -#define read_c0_taglo() __read_32bit_c0_register($28, 0) -#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val) - -#define read_c0_dtaglo() __read_32bit_c0_register($28, 2) -#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val) - -#define read_c0_taghi() __read_32bit_c0_register($29, 0) -#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val) - -#define read_c0_errorepc() __read_ulong_c0_register($30, 0) -#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val) - -/* MIPSR2 */ -#define read_c0_hwrena() __read_32bit_c0_register($7, 0) -#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val) - -#define read_c0_intctl() __read_32bit_c0_register($12, 1) -#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val) - -#define read_c0_srsctl() __read_32bit_c0_register($12, 2) -#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val) - -#define read_c0_srsmap() __read_32bit_c0_register($12, 3) -#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val) - -#define read_c0_ebase() __read_32bit_c0_register($15, 1) -#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val) - -/* - * Macros to access the floating point coprocessor control registers - */ -#define read_32bit_cp1_register(source) \ -({ int __res; \ - __asm__ __volatile__( \ - ".set\tpush\n\t" \ - ".set\treorder\n\t" \ - "cfc1\t%0,"STR(source)"\n\t" \ - ".set\tpop" \ - : "=r" (__res)); \ - __res;}) - -#define rddsp(mask) \ -({ \ - unsigned int __res; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # rddsp $1, %x1 \n" \ - " .word 0x7c000cb8 | (%x1 << 16) \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__res) \ - : "i" (mask)); \ - __res; \ -}) - -#define wrdsp(val, mask) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # wrdsp $1, %x1 \n" \ - " .word 0x7c2004f8 | (%x1 << 11) \n" \ - " .set pop \n" \ - : \ - : "r" (val), "i" (mask)); \ -} while (0) - -#if 0 /* Need DSP ASE capable assembler ... */ -#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;}) -#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;}) -#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;}) -#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;}) - -#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;}) -#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;}) -#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;}) -#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;}) - -#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x)) -#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x)) -#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x)) -#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x)) - -#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x)) -#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x)) -#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x)) -#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x)) - -#else - -#define mfhi0() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mfhi %0, $ac0 \n" \ - " .word 0x00000810 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mfhi1() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mfhi %0, $ac1 \n" \ - " .word 0x00200810 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mfhi2() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mfhi %0, $ac2 \n" \ - " .word 0x00400810 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mfhi3() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mfhi %0, $ac3 \n" \ - " .word 0x00600810 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mflo0() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mflo %0, $ac0 \n" \ - " .word 0x00000812 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mflo1() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mflo %0, $ac1 \n" \ - " .word 0x00200812 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mflo2() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mflo %0, $ac2 \n" \ - " .word 0x00400812 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mflo3() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mflo %0, $ac3 \n" \ - " .word 0x00600812 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mthi0(x) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # mthi $1, $ac0 \n" \ - " .word 0x00200011 \n" \ - " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) - -#define mthi1(x) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # mthi $1, $ac1 \n" \ - " .word 0x00200811 \n" \ - " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) - -#define mthi2(x) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # mthi $1, $ac2 \n" \ - " .word 0x00201011 \n" \ - " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) - -#define mthi3(x) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # mthi $1, $ac3 \n" \ - " .word 0x00201811 \n" \ - " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) - -#define mtlo0(x) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # mtlo $1, $ac0 \n" \ - " .word 0x00200013 \n" \ - " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) - -#define mtlo1(x) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # mtlo $1, $ac1 \n" \ - " .word 0x00200813 \n" \ - " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) - -#define mtlo2(x) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # mtlo $1, $ac2 \n" \ - " .word 0x00201013 \n" \ - " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) - -#define mtlo3(x) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # mtlo $1, $ac3 \n" \ - " .word 0x00201813 \n" \ - " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) - -#endif - -/* - * TLB operations. - * - * It is responsibility of the caller to take care of any TLB hazards. - */ -static inline void tlb_probe(void) -{ - __asm__ __volatile__( - ".set noreorder\n\t" - "tlbp\n\t" - ".set reorder"); -} - -static inline void tlb_read(void) -{ -#if MIPS34K_MISSED_ITLB_WAR - int res = 0; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " .set noat \n" - " .set mips32r2 \n" - " .word 0x41610001 # dvpe $1 \n" - " move %0, $1 \n" - " ehb \n" - " .set pop \n" - : "=r" (res)); - - instruction_hazard(); -#endif - - __asm__ __volatile__( - ".set noreorder\n\t" - "tlbr\n\t" - ".set reorder"); - -#if MIPS34K_MISSED_ITLB_WAR - if ((res & _ULCAST_(1))) - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " .set noat \n" - " .set mips32r2 \n" - " .word 0x41600021 # evpe \n" - " ehb \n" - " .set pop \n"); -#endif -} - -static inline void tlb_write_indexed(void) -{ - __asm__ __volatile__( - ".set noreorder\n\t" - "tlbwi\n\t" - ".set reorder"); -} - -static inline void tlb_write_random(void) -{ - __asm__ __volatile__( - ".set noreorder\n\t" - "tlbwr\n\t" - ".set reorder"); -} - -/* - * Manipulate bits in a c0 register. - */ -#ifndef CONFIG_MIPS_MT_SMTC -/* - * SMTC Linux requires shutting-down microthread scheduling - * during CP0 register read-modify-write sequences. - */ -#define __BUILD_SET_C0(name) \ -static inline unsigned int \ -set_c0_##name(unsigned int set) \ -{ \ - unsigned int res; \ - \ - res = read_c0_##name(); \ - res |= set; \ - write_c0_##name(res); \ - \ - return res; \ -} \ - \ -static inline unsigned int \ -clear_c0_##name(unsigned int clear) \ -{ \ - unsigned int res; \ - \ - res = read_c0_##name(); \ - res &= ~clear; \ - write_c0_##name(res); \ - \ - return res; \ -} \ - \ -static inline unsigned int \ -change_c0_##name(unsigned int change, unsigned int new) \ -{ \ - unsigned int res; \ - \ - res = read_c0_##name(); \ - res &= ~change; \ - res |= (new & change); \ - write_c0_##name(res); \ - \ - return res; \ -} - -#else /* SMTC versions that manage MT scheduling */ - -#include - -/* - * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with - * header file recursion. - */ -static inline unsigned int __dmt(void) -{ - int res; - - __asm__ __volatile__( - " .set push \n" - " .set mips32r2 \n" - " .set noat \n" - " .word 0x41610BC1 # dmt $1 \n" - " ehb \n" - " move %0, $1 \n" - " .set pop \n" - : "=r" (res)); - - instruction_hazard(); - - return res; -} - -#define __VPECONTROL_TE_SHIFT 15 -#define __VPECONTROL_TE (1UL << __VPECONTROL_TE_SHIFT) - -#define __EMT_ENABLE __VPECONTROL_TE - -static inline void __emt(unsigned int previous) -{ - if ((previous & __EMT_ENABLE)) - __asm__ __volatile__( - " .set mips32r2 \n" - " .word 0x41600be1 # emt \n" - " ehb \n" - " .set mips0 \n"); -} - -static inline void __ehb(void) -{ - __asm__ __volatile__( - " .set mips32r2 \n" - " ehb \n" " .set mips0 \n"); -} - -/* - * Note that local_irq_save/restore affect TC-specific IXMT state, - * not Status.IE as in non-SMTC kernel. - */ - -#define __BUILD_SET_C0(name) \ -static inline unsigned int \ -set_c0_##name(unsigned int set) \ -{ \ - unsigned int res; \ - unsigned int omt; \ - unsigned long flags; \ - \ - local_irq_save(flags); \ - omt = __dmt(); \ - res = read_c0_##name(); \ - res |= set; \ - write_c0_##name(res); \ - __emt(omt); \ - local_irq_restore(flags); \ - \ - return res; \ -} \ - \ -static inline unsigned int \ -clear_c0_##name(unsigned int clear) \ -{ \ - unsigned int res; \ - unsigned int omt; \ - unsigned long flags; \ - \ - local_irq_save(flags); \ - omt = __dmt(); \ - res = read_c0_##name(); \ - res &= ~clear; \ - write_c0_##name(res); \ - __emt(omt); \ - local_irq_restore(flags); \ - \ - return res; \ -} \ - \ -static inline unsigned int \ -change_c0_##name(unsigned int change, unsigned int new) \ -{ \ - unsigned int res; \ - unsigned int omt; \ - unsigned long flags; \ - \ - local_irq_save(flags); \ - \ - omt = __dmt(); \ - res = read_c0_##name(); \ - res &= ~change; \ - res |= (new & change); \ - write_c0_##name(res); \ - __emt(omt); \ - local_irq_restore(flags); \ - \ - return res; \ -} -#endif - -__BUILD_SET_C0(status) -__BUILD_SET_C0(cause) -__BUILD_SET_C0(config) -__BUILD_SET_C0(intcontrol) -__BUILD_SET_C0(intctl) -__BUILD_SET_C0(srsmap) - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_MIPSREGS_H */ diff --git a/include/asm-mips/mman.h b/include/asm-mips/mman.h deleted file mode 100644 index e4d6f1fb1cf7..000000000000 --- a/include/asm-mips/mman.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1999, 2002 by Ralf Baechle - */ -#ifndef _ASM_MMAN_H -#define _ASM_MMAN_H - -/* - * Protections are chosen from these bits, OR'd together. The - * implementation does not necessarily support PROT_EXEC or PROT_WRITE - * without PROT_READ. The only guarantees are that no writing will be - * allowed without PROT_WRITE and no access will be allowed for PROT_NONE. - */ -#define PROT_NONE 0x00 /* page can not be accessed */ -#define PROT_READ 0x01 /* page can be read */ -#define PROT_WRITE 0x02 /* page can be written */ -#define PROT_EXEC 0x04 /* page can be executed */ -/* 0x08 reserved for PROT_EXEC_NOFLUSH */ -#define PROT_SEM 0x10 /* page may be used for atomic ops */ -#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ -#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ - -/* - * Flags for mmap - */ -#define MAP_SHARED 0x001 /* Share changes */ -#define MAP_PRIVATE 0x002 /* Changes are private */ -#define MAP_TYPE 0x00f /* Mask for type of mapping */ -#define MAP_FIXED 0x010 /* Interpret addr exactly */ - -/* not used by linux, but here to make sure we don't clash with ABI defines */ -#define MAP_RENAME 0x020 /* Assign page to file */ -#define MAP_AUTOGROW 0x040 /* File may grow by writing */ -#define MAP_LOCAL 0x080 /* Copy on fork/sproc */ -#define MAP_AUTORSRV 0x100 /* Logical swap reserved on demand */ - -/* These are linux-specific */ -#define MAP_NORESERVE 0x0400 /* don't check for reservations */ -#define MAP_ANONYMOUS 0x0800 /* don't use a file */ -#define MAP_GROWSDOWN 0x1000 /* stack-like segment */ -#define MAP_DENYWRITE 0x2000 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x4000 /* mark it as an executable */ -#define MAP_LOCKED 0x8000 /* pages are locked */ -#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x20000 /* do not block on IO */ - -/* - * Flags for msync - */ -#define MS_ASYNC 0x0001 /* sync memory asynchronously */ -#define MS_INVALIDATE 0x0002 /* invalidate mappings & caches */ -#define MS_SYNC 0x0004 /* synchronous memory sync */ - -/* - * Flags for mlockall - */ -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#define MADV_NORMAL 0 /* no further special treatment */ -#define MADV_RANDOM 1 /* expect random page references */ -#define MADV_SEQUENTIAL 2 /* expect sequential page references */ -#define MADV_WILLNEED 3 /* will need these pages */ -#define MADV_DONTNEED 4 /* don't need these pages */ - -/* common parameters: try to keep these consistent across architectures */ -#define MADV_REMOVE 9 /* remove these pages & resources */ -#define MADV_DONTFORK 10 /* don't inherit across fork */ -#define MADV_DOFORK 11 /* do inherit across fork */ - -/* compatibility flags */ -#define MAP_FILE 0 - -#endif /* _ASM_MMAN_H */ diff --git a/include/asm-mips/mmu.h b/include/asm-mips/mmu.h deleted file mode 100644 index 4063edd79623..000000000000 --- a/include/asm-mips/mmu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_MMU_H -#define __ASM_MMU_H - -typedef unsigned long mm_context_t[NR_CPUS]; - -#endif /* __ASM_MMU_H */ diff --git a/include/asm-mips/mmu_context.h b/include/asm-mips/mmu_context.h deleted file mode 100644 index 0c4f245eaeb2..000000000000 --- a/include/asm-mips/mmu_context.h +++ /dev/null @@ -1,297 +0,0 @@ -/* - * Switch a MMU context. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 1997, 1998, 1999 by Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_MMU_CONTEXT_H -#define _ASM_MMU_CONTEXT_H - -#include -#include -#include -#include -#include -#ifdef CONFIG_MIPS_MT_SMTC -#include -#include -#endif /* SMTC */ -#include - -/* - * For the fast tlb miss handlers, we keep a per cpu array of pointers - * to the current pgd for each processor. Also, the proc. id is stuffed - * into the context register. - */ -extern unsigned long pgd_current[]; - -#define TLBMISS_HANDLER_SETUP_PGD(pgd) \ - pgd_current[smp_processor_id()] = (unsigned long)(pgd) - -#ifdef CONFIG_32BIT -#define TLBMISS_HANDLER_SETUP() \ - write_c0_context((unsigned long) smp_processor_id() << 25); \ - TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) -#endif -#ifdef CONFIG_64BIT -#define TLBMISS_HANDLER_SETUP() \ - write_c0_context((unsigned long) smp_processor_id() << 26); \ - TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) -#endif - -#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) - -#define ASID_INC 0x40 -#define ASID_MASK 0xfc0 - -#elif defined(CONFIG_CPU_R8000) - -#define ASID_INC 0x10 -#define ASID_MASK 0xff0 - -#elif defined(CONFIG_CPU_RM9000) - -#define ASID_INC 0x1 -#define ASID_MASK 0xfff - -/* SMTC/34K debug hack - but maybe we'll keep it */ -#elif defined(CONFIG_MIPS_MT_SMTC) - -#define ASID_INC 0x1 -extern unsigned long smtc_asid_mask; -#define ASID_MASK (smtc_asid_mask) -#define HW_ASID_MASK 0xff -/* End SMTC/34K debug hack */ -#else /* FIXME: not correct for R6000 */ - -#define ASID_INC 0x1 -#define ASID_MASK 0xff - -#endif - -#define cpu_context(cpu, mm) ((mm)->context[cpu]) -#define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & ASID_MASK) -#define asid_cache(cpu) (cpu_data[cpu].asid_cache) - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -/* - * All unused by hardware upper bits will be considered - * as a software asid extension. - */ -#define ASID_VERSION_MASK ((unsigned long)~(ASID_MASK|(ASID_MASK-1))) -#define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1) - -#ifndef CONFIG_MIPS_MT_SMTC -/* Normal, classic MIPS get_new_mmu_context */ -static inline void -get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) -{ - unsigned long asid = asid_cache(cpu); - - if (! ((asid += ASID_INC) & ASID_MASK) ) { - if (cpu_has_vtag_icache) - flush_icache_all(); - local_flush_tlb_all(); /* start new asid cycle */ - if (!asid) /* fix version if needed */ - asid = ASID_FIRST_VERSION; - } - cpu_context(cpu, mm) = asid_cache(cpu) = asid; -} - -#else /* CONFIG_MIPS_MT_SMTC */ - -#define get_new_mmu_context(mm, cpu) smtc_get_new_mmu_context((mm), (cpu)) - -#endif /* CONFIG_MIPS_MT_SMTC */ - -/* - * Initialize the context related info for a new mm_struct - * instance. - */ -static inline int -init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - int i; - - for_each_online_cpu(i) - cpu_context(i, mm) = 0; - - return 0; -} - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ - unsigned int cpu = smp_processor_id(); - unsigned long flags; -#ifdef CONFIG_MIPS_MT_SMTC - unsigned long oldasid; - unsigned long mtflags; - int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id; - local_irq_save(flags); - mtflags = dvpe(); -#else /* Not SMTC */ - local_irq_save(flags); -#endif /* CONFIG_MIPS_MT_SMTC */ - - /* Check if our ASID is of an older version and thus invalid */ - if ((cpu_context(cpu, next) ^ asid_cache(cpu)) & ASID_VERSION_MASK) - get_new_mmu_context(next, cpu); -#ifdef CONFIG_MIPS_MT_SMTC - /* - * If the EntryHi ASID being replaced happens to be - * the value flagged at ASID recycling time as having - * an extended life, clear the bit showing it being - * in use by this "CPU", and if that's the last bit, - * free up the ASID value for use and flush any old - * instances of it from the TLB. - */ - oldasid = (read_c0_entryhi() & ASID_MASK); - if(smtc_live_asid[mytlb][oldasid]) { - smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); - if(smtc_live_asid[mytlb][oldasid] == 0) - smtc_flush_tlb_asid(oldasid); - } - /* - * Tread softly on EntryHi, and so long as we support - * having ASID_MASK smaller than the hardware maximum, - * make sure no "soft" bits become "hard"... - */ - write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) - | (cpu_context(cpu, next) & ASID_MASK)); - ehb(); /* Make sure it propagates to TCStatus */ - evpe(mtflags); -#else - write_c0_entryhi(cpu_context(cpu, next)); -#endif /* CONFIG_MIPS_MT_SMTC */ - TLBMISS_HANDLER_SETUP_PGD(next->pgd); - - /* - * Mark current->active_mm as not "active" anymore. - * We don't want to mislead possible IPI tlb flush routines. - */ - cpu_clear(cpu, prev->cpu_vm_mask); - cpu_set(cpu, next->cpu_vm_mask); - - local_irq_restore(flags); -} - -/* - * Destroy context related info for an mm_struct that is about - * to be put to rest. - */ -static inline void destroy_context(struct mm_struct *mm) -{ -} - -#define deactivate_mm(tsk, mm) do { } while (0) - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -static inline void -activate_mm(struct mm_struct *prev, struct mm_struct *next) -{ - unsigned long flags; - unsigned int cpu = smp_processor_id(); - -#ifdef CONFIG_MIPS_MT_SMTC - unsigned long oldasid; - unsigned long mtflags; - int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id; -#endif /* CONFIG_MIPS_MT_SMTC */ - - local_irq_save(flags); - - /* Unconditionally get a new ASID. */ - get_new_mmu_context(next, cpu); - -#ifdef CONFIG_MIPS_MT_SMTC - /* See comments for similar code above */ - mtflags = dvpe(); - oldasid = read_c0_entryhi() & ASID_MASK; - if(smtc_live_asid[mytlb][oldasid]) { - smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); - if(smtc_live_asid[mytlb][oldasid] == 0) - smtc_flush_tlb_asid(oldasid); - } - /* See comments for similar code above */ - write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | - (cpu_context(cpu, next) & ASID_MASK)); - ehb(); /* Make sure it propagates to TCStatus */ - evpe(mtflags); -#else - write_c0_entryhi(cpu_context(cpu, next)); -#endif /* CONFIG_MIPS_MT_SMTC */ - TLBMISS_HANDLER_SETUP_PGD(next->pgd); - - /* mark mmu ownership change */ - cpu_clear(cpu, prev->cpu_vm_mask); - cpu_set(cpu, next->cpu_vm_mask); - - local_irq_restore(flags); -} - -/* - * If mm is currently active_mm, we can't really drop it. Instead, - * we will get a new one for it. - */ -static inline void -drop_mmu_context(struct mm_struct *mm, unsigned cpu) -{ - unsigned long flags; -#ifdef CONFIG_MIPS_MT_SMTC - unsigned long oldasid; - /* Can't use spinlock because called from TLB flush within DVPE */ - unsigned int prevvpe; - int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id; -#endif /* CONFIG_MIPS_MT_SMTC */ - - local_irq_save(flags); - - if (cpu_isset(cpu, mm->cpu_vm_mask)) { - get_new_mmu_context(mm, cpu); -#ifdef CONFIG_MIPS_MT_SMTC - /* See comments for similar code above */ - prevvpe = dvpe(); - oldasid = (read_c0_entryhi() & ASID_MASK); - if (smtc_live_asid[mytlb][oldasid]) { - smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu); - if(smtc_live_asid[mytlb][oldasid] == 0) - smtc_flush_tlb_asid(oldasid); - } - /* See comments for similar code above */ - write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) - | cpu_asid(cpu, mm)); - ehb(); /* Make sure it propagates to TCStatus */ - evpe(prevvpe); -#else /* not CONFIG_MIPS_MT_SMTC */ - write_c0_entryhi(cpu_asid(cpu, mm)); -#endif /* CONFIG_MIPS_MT_SMTC */ - } else { - /* will get a new context next time */ -#ifndef CONFIG_MIPS_MT_SMTC - cpu_context(cpu, mm) = 0; -#else /* SMTC */ - int i; - - /* SMTC shares the TLB (and ASIDs) across VPEs */ - for_each_online_cpu(i) { - if((smtc_status & SMTC_TLB_SHARED) - || (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id)) - cpu_context(i, mm) = 0; - } -#endif /* CONFIG_MIPS_MT_SMTC */ - } - local_irq_restore(flags); -} - -#endif /* _ASM_MMU_CONTEXT_H */ diff --git a/include/asm-mips/mmzone.h b/include/asm-mips/mmzone.h deleted file mode 100644 index f53ec54c92ff..000000000000 --- a/include/asm-mips/mmzone.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99 - * Rewritten for Linux 2.6 by Christoph Hellwig (hch@lst.de) Jan 2004 - */ -#ifndef _ASM_MMZONE_H_ -#define _ASM_MMZONE_H_ - -#include -#include - -#ifdef CONFIG_DISCONTIGMEM - -#define pfn_to_nid(pfn) pa_to_nid((pfn) << PAGE_SHIFT) - -#endif /* CONFIG_DISCONTIGMEM */ - -#endif /* _ASM_MMZONE_H_ */ diff --git a/include/asm-mips/module.h b/include/asm-mips/module.h deleted file mode 100644 index de6d09ebbd80..000000000000 --- a/include/asm-mips/module.h +++ /dev/null @@ -1,136 +0,0 @@ -#ifndef _ASM_MODULE_H -#define _ASM_MODULE_H - -#include -#include - -struct mod_arch_specific { - /* Data Bus Error exception tables */ - struct list_head dbe_list; - const struct exception_table_entry *dbe_start; - const struct exception_table_entry *dbe_end; -}; - -typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ - -typedef struct { - Elf64_Addr r_offset; /* Address of relocation. */ - Elf64_Word r_sym; /* Symbol index. */ - Elf64_Byte r_ssym; /* Special symbol. */ - Elf64_Byte r_type3; /* Third relocation. */ - Elf64_Byte r_type2; /* Second relocation. */ - Elf64_Byte r_type; /* First relocation. */ -} Elf64_Mips_Rel; - -typedef struct { - Elf64_Addr r_offset; /* Address of relocation. */ - Elf64_Word r_sym; /* Symbol index. */ - Elf64_Byte r_ssym; /* Special symbol. */ - Elf64_Byte r_type3; /* Third relocation. */ - Elf64_Byte r_type2; /* Second relocation. */ - Elf64_Byte r_type; /* First relocation. */ - Elf64_Sxword r_addend; /* Addend. */ -} Elf64_Mips_Rela; - -#ifdef CONFIG_32BIT - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr -#define Elf_Addr Elf32_Addr - -#define Elf_Mips_Rel Elf32_Rel -#define Elf_Mips_Rela Elf32_Rela - -#define ELF_MIPS_R_SYM(rel) ELF32_R_SYM(rel.r_info) -#define ELF_MIPS_R_TYPE(rel) ELF32_R_TYPE(rel.r_info) - -#endif - -#ifdef CONFIG_64BIT - -#define Elf_Shdr Elf64_Shdr -#define Elf_Sym Elf64_Sym -#define Elf_Ehdr Elf64_Ehdr -#define Elf_Addr Elf64_Addr - -#define Elf_Mips_Rel Elf64_Mips_Rel -#define Elf_Mips_Rela Elf64_Mips_Rela - -#define ELF_MIPS_R_SYM(rel) (rel.r_sym) -#define ELF_MIPS_R_TYPE(rel) (rel.r_type) - -#endif - -#ifdef CONFIG_MODULES -/* Given an address, look for it in the exception tables. */ -const struct exception_table_entry*search_module_dbetables(unsigned long addr); -#else -/* Given an address, look for it in the exception tables. */ -static inline const struct exception_table_entry * -search_module_dbetables(unsigned long addr) -{ - return NULL; -} -#endif - -#ifdef CONFIG_CPU_MIPS32_R1 -#define MODULE_PROC_FAMILY "MIPS32_R1 " -#elif defined CONFIG_CPU_MIPS32_R2 -#define MODULE_PROC_FAMILY "MIPS32_R2 " -#elif defined CONFIG_CPU_MIPS64_R1 -#define MODULE_PROC_FAMILY "MIPS64_R1 " -#elif defined CONFIG_CPU_MIPS64_R2 -#define MODULE_PROC_FAMILY "MIPS64_R2 " -#elif defined CONFIG_CPU_R3000 -#define MODULE_PROC_FAMILY "R3000 " -#elif defined CONFIG_CPU_TX39XX -#define MODULE_PROC_FAMILY "TX39XX " -#elif defined CONFIG_CPU_VR41XX -#define MODULE_PROC_FAMILY "VR41XX " -#elif defined CONFIG_CPU_R4300 -#define MODULE_PROC_FAMILY "R4300 " -#elif defined CONFIG_CPU_R4X00 -#define MODULE_PROC_FAMILY "R4X00 " -#elif defined CONFIG_CPU_TX49XX -#define MODULE_PROC_FAMILY "TX49XX " -#elif defined CONFIG_CPU_R5000 -#define MODULE_PROC_FAMILY "R5000 " -#elif defined CONFIG_CPU_R5432 -#define MODULE_PROC_FAMILY "R5432 " -#elif defined CONFIG_CPU_R6000 -#define MODULE_PROC_FAMILY "R6000 " -#elif defined CONFIG_CPU_NEVADA -#define MODULE_PROC_FAMILY "NEVADA " -#elif defined CONFIG_CPU_R8000 -#define MODULE_PROC_FAMILY "R8000 " -#elif defined CONFIG_CPU_R10000 -#define MODULE_PROC_FAMILY "R10000 " -#elif defined CONFIG_CPU_RM7000 -#define MODULE_PROC_FAMILY "RM7000 " -#elif defined CONFIG_CPU_RM9000 -#define MODULE_PROC_FAMILY "RM9000 " -#elif defined CONFIG_CPU_SB1 -#define MODULE_PROC_FAMILY "SB1 " -#elif defined CONFIG_CPU_LOONGSON2 -#define MODULE_PROC_FAMILY "LOONGSON2 " -#else -#error MODULE_PROC_FAMILY undefined for your processor configuration -#endif - -#ifdef CONFIG_32BIT -#define MODULE_KERNEL_TYPE "32BIT " -#elif defined CONFIG_64BIT -#define MODULE_KERNEL_TYPE "64BIT " -#endif - -#ifdef CONFIG_MIPS_MT_SMTC -#define MODULE_KERNEL_SMTC "MT_SMTC " -#else -#define MODULE_KERNEL_SMTC "" -#endif - -#define MODULE_ARCH_VERMAGIC \ - MODULE_PROC_FAMILY MODULE_KERNEL_TYPE MODULE_KERNEL_SMTC - -#endif /* _ASM_MODULE_H */ diff --git a/include/asm-mips/msc01_ic.h b/include/asm-mips/msc01_ic.h deleted file mode 100644 index 7989b9ffc1d2..000000000000 --- a/include/asm-mips/msc01_ic.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * PCI Register definitions for the MIPS System Controller. - * - * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef __ASM_MIPS_BOARDS_MSC01_IC_H -#define __ASM_MIPS_BOARDS_MSC01_IC_H - -/***************************************************************************** - * Register offset addresses - *****************************************************************************/ - -#define MSC01_IC_RST_OFS 0x00008 /* Software reset */ -#define MSC01_IC_ENAL_OFS 0x00100 /* Int_in enable mask 31:0 */ -#define MSC01_IC_ENAH_OFS 0x00108 /* Int_in enable mask 63:32 */ -#define MSC01_IC_DISL_OFS 0x00120 /* Int_in disable mask 31:0 */ -#define MSC01_IC_DISH_OFS 0x00128 /* Int_in disable mask 63:32 */ -#define MSC01_IC_ISBL_OFS 0x00140 /* Raw int_in 31:0 */ -#define MSC01_IC_ISBH_OFS 0x00148 /* Raw int_in 63:32 */ -#define MSC01_IC_ISAL_OFS 0x00160 /* Masked int_in 31:0 */ -#define MSC01_IC_ISAH_OFS 0x00168 /* Masked int_in 63:32 */ -#define MSC01_IC_LVL_OFS 0x00180 /* Disable priority int_out */ -#define MSC01_IC_RAMW_OFS 0x00180 /* Shadow set RAM (EI) */ -#define MSC01_IC_OSB_OFS 0x00188 /* Raw int_out */ -#define MSC01_IC_OSA_OFS 0x00190 /* Masked int_out */ -#define MSC01_IC_GENA_OFS 0x00198 /* Global HW int enable */ -#define MSC01_IC_BASE_OFS 0x001a0 /* Base address of IC_VEC */ -#define MSC01_IC_VEC_OFS 0x001b0 /* Active int's vector address */ -#define MSC01_IC_EOI_OFS 0x001c0 /* Enable lower level ints */ -#define MSC01_IC_CFG_OFS 0x001c8 /* Configuration register */ -#define MSC01_IC_TRLD_OFS 0x001d0 /* Interval timer reload val */ -#define MSC01_IC_TVAL_OFS 0x001e0 /* Interval timer current val */ -#define MSC01_IC_TCFG_OFS 0x001f0 /* Interval timer config */ -#define MSC01_IC_SUP_OFS 0x00200 /* Set up int_in line 0 */ -#define MSC01_IC_ENA_OFS 0x00800 /* Int_in enable mask 63:0 */ -#define MSC01_IC_DIS_OFS 0x00820 /* Int_in disable mask 63:0 */ -#define MSC01_IC_ISB_OFS 0x00840 /* Raw int_in 63:0 */ -#define MSC01_IC_ISA_OFS 0x00860 /* Masked int_in 63:0 */ - -/***************************************************************************** - * Register field encodings - *****************************************************************************/ - -#define MSC01_IC_RST_RST_SHF 0 -#define MSC01_IC_RST_RST_MSK 0x00000001 -#define MSC01_IC_RST_RST_BIT MSC01_IC_RST_RST_MSK -#define MSC01_IC_LVL_LVL_SHF 0 -#define MSC01_IC_LVL_LVL_MSK 0x000000ff -#define MSC01_IC_LVL_SPUR_SHF 16 -#define MSC01_IC_LVL_SPUR_MSK 0x00010000 -#define MSC01_IC_LVL_SPUR_BIT MSC01_IC_LVL_SPUR_MSK -#define MSC01_IC_RAMW_RIPL_SHF 0 -#define MSC01_IC_RAMW_RIPL_MSK 0x0000003f -#define MSC01_IC_RAMW_DATA_SHF 6 -#define MSC01_IC_RAMW_DATA_MSK 0x00000fc0 -#define MSC01_IC_RAMW_ADDR_SHF 25 -#define MSC01_IC_RAMW_ADDR_MSK 0x7e000000 -#define MSC01_IC_RAMW_READ_SHF 31 -#define MSC01_IC_RAMW_READ_MSK 0x80000000 -#define MSC01_IC_RAMW_READ_BIT MSC01_IC_RAMW_READ_MSK -#define MSC01_IC_OSB_OSB_SHF 0 -#define MSC01_IC_OSB_OSB_MSK 0x000000ff -#define MSC01_IC_OSA_OSA_SHF 0 -#define MSC01_IC_OSA_OSA_MSK 0x000000ff -#define MSC01_IC_GENA_GENA_SHF 0 -#define MSC01_IC_GENA_GENA_MSK 0x00000001 -#define MSC01_IC_GENA_GENA_BIT MSC01_IC_GENA_GENA_MSK -#define MSC01_IC_CFG_DIS_SHF 0 -#define MSC01_IC_CFG_DIS_MSK 0x00000001 -#define MSC01_IC_CFG_DIS_BIT MSC01_IC_CFG_DIS_MSK -#define MSC01_IC_CFG_SHFT_SHF 8 -#define MSC01_IC_CFG_SHFT_MSK 0x00000f00 -#define MSC01_IC_TCFG_ENA_SHF 0 -#define MSC01_IC_TCFG_ENA_MSK 0x00000001 -#define MSC01_IC_TCFG_ENA_BIT MSC01_IC_TCFG_ENA_MSK -#define MSC01_IC_TCFG_INT_SHF 8 -#define MSC01_IC_TCFG_INT_MSK 0x00000100 -#define MSC01_IC_TCFG_INT_BIT MSC01_IC_TCFG_INT_MSK -#define MSC01_IC_TCFG_EDGE_SHF 16 -#define MSC01_IC_TCFG_EDGE_MSK 0x00010000 -#define MSC01_IC_TCFG_EDGE_BIT MSC01_IC_TCFG_EDGE_MSK -#define MSC01_IC_SUP_PRI_SHF 0 -#define MSC01_IC_SUP_PRI_MSK 0x00000007 -#define MSC01_IC_SUP_EDGE_SHF 8 -#define MSC01_IC_SUP_EDGE_MSK 0x00000100 -#define MSC01_IC_SUP_EDGE_BIT MSC01_IC_SUP_EDGE_MSK -#define MSC01_IC_SUP_STEP 8 - -/* - * MIPS System controller interrupt register base. - * - */ - -/***************************************************************************** - * Absolute register addresses - *****************************************************************************/ - -#define MSC01_IC_RST (MSC01_IC_REG_BASE + MSC01_IC_RST_OFS) -#define MSC01_IC_ENAL (MSC01_IC_REG_BASE + MSC01_IC_ENAL_OFS) -#define MSC01_IC_ENAH (MSC01_IC_REG_BASE + MSC01_IC_ENAH_OFS) -#define MSC01_IC_DISL (MSC01_IC_REG_BASE + MSC01_IC_DISL_OFS) -#define MSC01_IC_DISH (MSC01_IC_REG_BASE + MSC01_IC_DISH_OFS) -#define MSC01_IC_ISBL (MSC01_IC_REG_BASE + MSC01_IC_ISBL_OFS) -#define MSC01_IC_ISBH (MSC01_IC_REG_BASE + MSC01_IC_ISBH_OFS) -#define MSC01_IC_ISAL (MSC01_IC_REG_BASE + MSC01_IC_ISAL_OFS) -#define MSC01_IC_ISAH (MSC01_IC_REG_BASE + MSC01_IC_ISAH_OFS) -#define MSC01_IC_LVL (MSC01_IC_REG_BASE + MSC01_IC_LVL_OFS) -#define MSC01_IC_RAMW (MSC01_IC_REG_BASE + MSC01_IC_RAMW_OFS) -#define MSC01_IC_OSB (MSC01_IC_REG_BASE + MSC01_IC_OSB_OFS) -#define MSC01_IC_OSA (MSC01_IC_REG_BASE + MSC01_IC_OSA_OFS) -#define MSC01_IC_GENA (MSC01_IC_REG_BASE + MSC01_IC_GENA_OFS) -#define MSC01_IC_BASE (MSC01_IC_REG_BASE + MSC01_IC_BASE_OFS) -#define MSC01_IC_VEC (MSC01_IC_REG_BASE + MSC01_IC_VEC_OFS) -#define MSC01_IC_EOI (MSC01_IC_REG_BASE + MSC01_IC_EOI_OFS) -#define MSC01_IC_CFG (MSC01_IC_REG_BASE + MSC01_IC_CFG_OFS) -#define MSC01_IC_TRLD (MSC01_IC_REG_BASE + MSC01_IC_TRLD_OFS) -#define MSC01_IC_TVAL (MSC01_IC_REG_BASE + MSC01_IC_TVAL_OFS) -#define MSC01_IC_TCFG (MSC01_IC_REG_BASE + MSC01_IC_TCFG_OFS) -#define MSC01_IC_SUP (MSC01_IC_REG_BASE + MSC01_IC_SUP_OFS) -#define MSC01_IC_ENA (MSC01_IC_REG_BASE + MSC01_IC_ENA_OFS) -#define MSC01_IC_DIS (MSC01_IC_REG_BASE + MSC01_IC_DIS_OFS) -#define MSC01_IC_ISB (MSC01_IC_REG_BASE + MSC01_IC_ISB_OFS) -#define MSC01_IC_ISA (MSC01_IC_REG_BASE + MSC01_IC_ISA_OFS) - -/* - * Soc-it interrupts are configurable. - * Every board describes its IRQ mapping with this table. - */ -typedef struct msc_irqmap { - int im_irq; - int im_type; - int im_lvl; -} msc_irqmap_t; - -/* im_type */ -#define MSC01_IRQ_LEVEL 0 -#define MSC01_IRQ_EDGE 1 - -extern void __init init_msc_irqs(unsigned long icubase, unsigned int base, msc_irqmap_t *imp, int nirq); -extern void ll_msc_irq(void); - -#endif /* __ASM_MIPS_BOARDS_MSC01_IC_H */ - diff --git a/include/asm-mips/msgbuf.h b/include/asm-mips/msgbuf.h deleted file mode 100644 index 0d6c7f14de31..000000000000 --- a/include/asm-mips/msgbuf.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef _ASM_MSGBUF_H -#define _ASM_MSGBUF_H - - -/* - * The msqid64_ds structure for the MIPS architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - extension of time_t to 64-bit on 32-bitsystem to solve the y2038 problem - * - 2 miscellaneous unsigned long values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; -#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN) - unsigned long __unused1; -#endif - __kernel_time_t msg_stime; /* last msgsnd time */ -#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN) - unsigned long __unused1; -#endif -#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN) - unsigned long __unused2; -#endif - __kernel_time_t msg_rtime; /* last msgrcv time */ -#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN) - unsigned long __unused2; -#endif -#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN) - unsigned long __unused3; -#endif - __kernel_time_t msg_ctime; /* last change time */ -#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN) - unsigned long __unused3; -#endif - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASM_MSGBUF_H */ diff --git a/include/asm-mips/mutex.h b/include/asm-mips/mutex.h deleted file mode 100644 index 458c1f7fbc18..000000000000 --- a/include/asm-mips/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-mips/nile4.h b/include/asm-mips/nile4.h deleted file mode 100644 index c3ca959aa4d9..000000000000 --- a/include/asm-mips/nile4.h +++ /dev/null @@ -1,310 +0,0 @@ -/* - * asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions - * - * Copyright (C) 2000 Geert Uytterhoeven - * Sony Software Development Center Europe (SDCE), Brussels - * - * This file is based on the following documentation: - * - * NEC Vrc 5074 System Controller Data Sheet, June 1998 - */ - -#ifndef _ASM_NILE4_H -#define _ASM_NILE4_H - -#define NILE4_BASE 0xbfa00000 -#define NILE4_SIZE 0x00200000 /* 2 MB */ - - - /* - * Physical Device Address Registers (PDARs) - */ - -#define NILE4_SDRAM0 0x0000 /* SDRAM Bank 0 [R/W] */ -#define NILE4_SDRAM1 0x0008 /* SDRAM Bank 1 [R/W] */ -#define NILE4_DCS2 0x0010 /* Device Chip-Select 2 [R/W] */ -#define NILE4_DCS3 0x0018 /* Device Chip-Select 3 [R/W] */ -#define NILE4_DCS4 0x0020 /* Device Chip-Select 4 [R/W] */ -#define NILE4_DCS5 0x0028 /* Device Chip-Select 5 [R/W] */ -#define NILE4_DCS6 0x0030 /* Device Chip-Select 6 [R/W] */ -#define NILE4_DCS7 0x0038 /* Device Chip-Select 7 [R/W] */ -#define NILE4_DCS8 0x0040 /* Device Chip-Select 8 [R/W] */ -#define NILE4_PCIW0 0x0060 /* PCI Address Window 0 [R/W] */ -#define NILE4_PCIW1 0x0068 /* PCI Address Window 1 [R/W] */ -#define NILE4_INTCS 0x0070 /* Controller Internal Registers and Devices */ - /* [R/W] */ -#define NILE4_BOOTCS 0x0078 /* Boot ROM Chip-Select [R/W] */ - - - /* - * CPU Interface Registers - */ - -#define NILE4_CPUSTAT 0x0080 /* CPU Status [R/W] */ -#define NILE4_INTCTRL 0x0088 /* Interrupt Control [R/W] */ -#define NILE4_INTSTAT0 0x0090 /* Interrupt Status 0 [R] */ -#define NILE4_INTSTAT1 0x0098 /* Interrupt Status 1 and CPU Interrupt */ - /* Enable [R/W] */ -#define NILE4_INTCLR 0x00A0 /* Interrupt Clear [R/W] */ -#define NILE4_INTPPES 0x00A8 /* PCI Interrupt Control [R/W] */ - - - /* - * Memory-Interface Registers - */ - -#define NILE4_MEMCTRL 0x00C0 /* Memory Control */ -#define NILE4_ACSTIME 0x00C8 /* Memory Access Timing [R/W] */ -#define NILE4_CHKERR 0x00D0 /* Memory Check Error Status [R] */ - - - /* - * PCI-Bus Registers - */ - -#define NILE4_PCICTRL 0x00E0 /* PCI Control [R/W] */ -#define NILE4_PCIARB 0x00E8 /* PCI Arbiter [R/W] */ -#define NILE4_PCIINIT0 0x00F0 /* PCI Master (Initiator) 0 [R/W] */ -#define NILE4_PCIINIT1 0x00F8 /* PCI Master (Initiator) 1 [R/W] */ -#define NILE4_PCIERR 0x00B8 /* PCI Error [R/W] */ - - - /* - * Local-Bus Registers - */ - -#define NILE4_LCNFG 0x0100 /* Local Bus Configuration [R/W] */ -#define NILE4_LCST2 0x0110 /* Local Bus Chip-Select Timing 2 [R/W] */ -#define NILE4_LCST3 0x0118 /* Local Bus Chip-Select Timing 3 [R/W] */ -#define NILE4_LCST4 0x0120 /* Local Bus Chip-Select Timing 4 [R/W] */ -#define NILE4_LCST5 0x0128 /* Local Bus Chip-Select Timing 5 [R/W] */ -#define NILE4_LCST6 0x0130 /* Local Bus Chip-Select Timing 6 [R/W] */ -#define NILE4_LCST7 0x0138 /* Local Bus Chip-Select Timing 7 [R/W] */ -#define NILE4_LCST8 0x0140 /* Local Bus Chip-Select Timing 8 [R/W] */ -#define NILE4_DCSFN 0x0150 /* Device Chip-Select Muxing and Output */ - /* Enables [R/W] */ -#define NILE4_DCSIO 0x0158 /* Device Chip-Selects As I/O Bits [R/W] */ -#define NILE4_BCST 0x0178 /* Local Boot Chip-Select Timing [R/W] */ - - - /* - * DMA Registers - */ - -#define NILE4_DMACTRL0 0x0180 /* DMA Control 0 [R/W] */ -#define NILE4_DMASRCA0 0x0188 /* DMA Source Address 0 [R/W] */ -#define NILE4_DMADESA0 0x0190 /* DMA Destination Address 0 [R/W] */ -#define NILE4_DMACTRL1 0x0198 /* DMA Control 1 [R/W] */ -#define NILE4_DMASRCA1 0x01A0 /* DMA Source Address 1 [R/W] */ -#define NILE4_DMADESA1 0x01A8 /* DMA Destination Address 1 [R/W] */ - - - /* - * Timer Registers - */ - -#define NILE4_T0CTRL 0x01C0 /* SDRAM Refresh Control [R/W] */ -#define NILE4_T0CNTR 0x01C8 /* SDRAM Refresh Counter [R/W] */ -#define NILE4_T1CTRL 0x01D0 /* CPU-Bus Read Time-Out Control [R/W] */ -#define NILE4_T1CNTR 0x01D8 /* CPU-Bus Read Time-Out Counter [R/W] */ -#define NILE4_T2CTRL 0x01E0 /* General-Purpose Timer Control [R/W] */ -#define NILE4_T2CNTR 0x01E8 /* General-Purpose Timer Counter [R/W] */ -#define NILE4_T3CTRL 0x01F0 /* Watchdog Timer Control [R/W] */ -#define NILE4_T3CNTR 0x01F8 /* Watchdog Timer Counter [R/W] */ - - - /* - * PCI Configuration Space Registers - */ - -#define NILE4_PCI_BASE 0x0200 - -#define NILE4_VID 0x0200 /* PCI Vendor ID [R] */ -#define NILE4_DID 0x0202 /* PCI Device ID [R] */ -#define NILE4_PCICMD 0x0204 /* PCI Command [R/W] */ -#define NILE4_PCISTS 0x0206 /* PCI Status [R/W] */ -#define NILE4_REVID 0x0208 /* PCI Revision ID [R] */ -#define NILE4_CLASS 0x0209 /* PCI Class Code [R] */ -#define NILE4_CLSIZ 0x020C /* PCI Cache Line Size [R/W] */ -#define NILE4_MLTIM 0x020D /* PCI Latency Timer [R/W] */ -#define NILE4_HTYPE 0x020E /* PCI Header Type [R] */ -#define NILE4_BIST 0x020F /* BIST [R] (unimplemented) */ -#define NILE4_BARC 0x0210 /* PCI Base Address Register Control [R/W] */ -#define NILE4_BAR0 0x0218 /* PCI Base Address Register 0 [R/W] */ -#define NILE4_BAR1 0x0220 /* PCI Base Address Register 1 [R/W] */ -#define NILE4_CIS 0x0228 /* PCI Cardbus CIS Pointer [R] */ - /* (unimplemented) */ -#define NILE4_SSVID 0x022C /* PCI Sub-System Vendor ID [R/W] */ -#define NILE4_SSID 0x022E /* PCI Sub-System ID [R/W] */ -#define NILE4_ROM 0x0230 /* Expansion ROM Base Address [R] */ - /* (unimplemented) */ -#define NILE4_INTLIN 0x023C /* PCI Interrupt Line [R/W] */ -#define NILE4_INTPIN 0x023D /* PCI Interrupt Pin [R] */ -#define NILE4_MINGNT 0x023E /* PCI Min_Gnt [R] (unimplemented) */ -#define NILE4_MAXLAT 0x023F /* PCI Max_Lat [R] (unimplemented) */ -#define NILE4_BAR2 0x0240 /* PCI Base Address Register 2 [R/W] */ -#define NILE4_BAR3 0x0248 /* PCI Base Address Register 3 [R/W] */ -#define NILE4_BAR4 0x0250 /* PCI Base Address Register 4 [R/W] */ -#define NILE4_BAR5 0x0258 /* PCI Base Address Register 5 [R/W] */ -#define NILE4_BAR6 0x0260 /* PCI Base Address Register 6 [R/W] */ -#define NILE4_BAR7 0x0268 /* PCI Base Address Register 7 [R/W] */ -#define NILE4_BAR8 0x0270 /* PCI Base Address Register 8 [R/W] */ -#define NILE4_BARB 0x0278 /* PCI Base Address Register BOOT [R/W] */ - - - /* - * Serial-Port Registers - */ - -#define NILE4_UART_BASE 0x0300 - -#define NILE4_UARTRBR 0x0300 /* UART Receiver Data Buffer [R] */ -#define NILE4_UARTTHR 0x0300 /* UART Transmitter Data Holding [W] */ -#define NILE4_UARTIER 0x0308 /* UART Interrupt Enable [R/W] */ -#define NILE4_UARTDLL 0x0300 /* UART Divisor Latch LSB [R/W] */ -#define NILE4_UARTDLM 0x0308 /* UART Divisor Latch MSB [R/W] */ -#define NILE4_UARTIIR 0x0310 /* UART Interrupt ID [R] */ -#define NILE4_UARTFCR 0x0310 /* UART FIFO Control [W] */ -#define NILE4_UARTLCR 0x0318 /* UART Line Control [R/W] */ -#define NILE4_UARTMCR 0x0320 /* UART Modem Control [R/W] */ -#define NILE4_UARTLSR 0x0328 /* UART Line Status [R/W] */ -#define NILE4_UARTMSR 0x0330 /* UART Modem Status [R/W] */ -#define NILE4_UARTSCR 0x0338 /* UART Scratch [R/W] */ - -#define NILE4_UART_BASE_BAUD 520833 /* 100 MHz / 12 / 16 */ - - - /* - * Interrupt Lines - */ - -#define NILE4_INT_CPCE 0 /* CPU-Interface Parity-Error Interrupt */ -#define NILE4_INT_CNTD 1 /* CPU No-Target Decode Interrupt */ -#define NILE4_INT_MCE 2 /* Memory-Check Error Interrupt */ -#define NILE4_INT_DMA 3 /* DMA Controller Interrupt */ -#define NILE4_INT_UART 4 /* UART Interrupt */ -#define NILE4_INT_WDOG 5 /* Watchdog Timer Interrupt */ -#define NILE4_INT_GPT 6 /* General-Purpose Timer Interrupt */ -#define NILE4_INT_LBRTD 7 /* Local-Bus Ready Timer Interrupt */ -#define NILE4_INT_INTA 8 /* PCI Interrupt Signal INTA# */ -#define NILE4_INT_INTB 9 /* PCI Interrupt Signal INTB# */ -#define NILE4_INT_INTC 10 /* PCI Interrupt Signal INTC# */ -#define NILE4_INT_INTD 11 /* PCI Interrupt Signal INTD# */ -#define NILE4_INT_INTE 12 /* PCI Interrupt Signal INTE# (ISA cascade) */ -#define NILE4_INT_RESV 13 /* Reserved */ -#define NILE4_INT_PCIS 14 /* PCI SERR# Interrupt */ -#define NILE4_INT_PCIE 15 /* PCI Internal Error Interrupt */ - - - /* - * Nile 4 Register Access - */ - -static inline void nile4_sync(void) -{ - volatile u32 *p = (volatile u32 *)0xbfc00000; - (void)(*p); -} - -static inline void nile4_out32(u32 offset, u32 val) -{ - *(volatile u32 *)(NILE4_BASE+offset) = val; - nile4_sync(); -} - -static inline u32 nile4_in32(u32 offset) -{ - u32 val = *(volatile u32 *)(NILE4_BASE+offset); - nile4_sync(); - return val; -} - -static inline void nile4_out16(u32 offset, u16 val) -{ - *(volatile u16 *)(NILE4_BASE+offset) = val; - nile4_sync(); -} - -static inline u16 nile4_in16(u32 offset) -{ - u16 val = *(volatile u16 *)(NILE4_BASE+offset); - nile4_sync(); - return val; -} - -static inline void nile4_out8(u32 offset, u8 val) -{ - *(volatile u8 *)(NILE4_BASE+offset) = val; - nile4_sync(); -} - -static inline u8 nile4_in8(u32 offset) -{ - u8 val = *(volatile u8 *)(NILE4_BASE+offset); - nile4_sync(); - return val; -} - - - /* - * Physical Device Address Registers - */ - -extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width, - int on_memory_bus, int visible); - - - /* - * PCI Master Registers - */ - -#define NILE4_PCICMD_IACK 0 /* PCI Interrupt Acknowledge */ -#define NILE4_PCICMD_IO 1 /* PCI I/O Space */ -#define NILE4_PCICMD_MEM 3 /* PCI Memory Space */ -#define NILE4_PCICMD_CFG 5 /* PCI Configuration Space */ - - - /* - * PCI Address Spaces - * - * Note that these are multiplexed using PCIINIT[01]! - */ - -#define NILE4_PCI_IO_BASE 0xa6000000 -#define NILE4_PCI_MEM_BASE 0xa8000000 -#define NILE4_PCI_CFG_BASE NILE4_PCI_MEM_BASE -#define NILE4_PCI_IACK_BASE NILE4_PCI_IO_BASE - - -extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr); - - - /* - * Interrupt Programming - */ - -#define NUM_I8259_INTERRUPTS 16 -#define NUM_NILE4_INTERRUPTS 16 - -#define IRQ_I8259_CASCADE NILE4_INT_INTE -#define is_i8259_irq(irq) ((irq) < NUM_I8259_INTERRUPTS) -#define nile4_to_irq(n) ((n)+NUM_I8259_INTERRUPTS) -#define irq_to_nile4(n) ((n)-NUM_I8259_INTERRUPTS) - -extern void nile4_map_irq(int nile4_irq, int cpu_irq); -extern void nile4_map_irq_all(int cpu_irq); -extern void nile4_enable_irq(unsigned int nile4_irq); -extern void nile4_disable_irq(unsigned int nile4_irq); -extern void nile4_disable_irq_all(void); -extern u16 nile4_get_irq_stat(int cpu_irq); -extern void nile4_enable_irq_output(int cpu_irq); -extern void nile4_disable_irq_output(int cpu_irq); -extern void nile4_set_pci_irq_polarity(int pci_irq, int high); -extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level); -extern void nile4_clear_irq(int nile4_irq); -extern void nile4_clear_irq_mask(u32 mask); -extern u8 nile4_i8259_iack(void); -extern void nile4_dump_irq_status(void); /* Debug */ - -#endif - diff --git a/include/asm-mips/paccess.h b/include/asm-mips/paccess.h deleted file mode 100644 index c2394f8b0fe1..000000000000 --- a/include/asm-mips/paccess.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 1997, 1998, 1999, 2000 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - * - * Protected memory access. Used for everything that might take revenge - * by sending a DBE error like accessing possibly non-existant memory or - * devices. - */ -#ifndef _ASM_PACCESS_H -#define _ASM_PACCESS_H - -#include - -#ifdef CONFIG_32BIT -#define __PA_ADDR ".word" -#endif -#ifdef CONFIG_64BIT -#define __PA_ADDR ".dword" -#endif - -extern asmlinkage void handle_ibe(void); -extern asmlinkage void handle_dbe(void); - -#define put_dbe(x, ptr) __put_dbe((x), (ptr), sizeof(*(ptr))) -#define get_dbe(x, ptr) __get_dbe((x), (ptr), sizeof(*(ptr))) - -struct __large_pstruct { unsigned long buf[100]; }; -#define __mp(x) (*(struct __large_pstruct *)(x)) - -#define __get_dbe(x, ptr, size) \ -({ \ - long __gu_err; \ - __typeof__(*(ptr)) __gu_val; \ - unsigned long __gu_addr; \ - __asm__("":"=r" (__gu_val)); \ - __gu_addr = (unsigned long) (ptr); \ - __asm__("":"=r" (__gu_err)); \ - switch (size) { \ - case 1: __get_dbe_asm("lb"); break; \ - case 2: __get_dbe_asm("lh"); break; \ - case 4: __get_dbe_asm("lw"); break; \ - case 8: __get_dbe_asm("ld"); break; \ - default: __get_dbe_unknown(); break; \ - } \ - x = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ -}) - -#define __get_dbe_asm(insn) \ -{ \ - __asm__ __volatile__( \ - "1:\t" insn "\t%1,%2\n\t" \ - "move\t%0,$0\n" \ - "2:\n\t" \ - ".section\t.fixup,\"ax\"\n" \ - "3:\tli\t%0,%3\n\t" \ - "move\t%1,$0\n\t" \ - "j\t2b\n\t" \ - ".previous\n\t" \ - ".section\t__dbe_table,\"a\"\n\t" \ - __PA_ADDR "\t1b, 3b\n\t" \ - ".previous" \ - :"=r" (__gu_err), "=r" (__gu_val) \ - :"o" (__mp(__gu_addr)), "i" (-EFAULT)); \ -} - -extern void __get_dbe_unknown(void); - -#define __put_dbe(x, ptr, size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __pu_val; \ - long __pu_addr; \ - __pu_val = (x); \ - __pu_addr = (long) (ptr); \ - __asm__("":"=r" (__pu_err)); \ - switch (size) { \ - case 1: __put_dbe_asm("sb"); break; \ - case 2: __put_dbe_asm("sh"); break; \ - case 4: __put_dbe_asm("sw"); break; \ - case 8: __put_dbe_asm("sd"); break; \ - default: __put_dbe_unknown(); break; \ - } \ - __pu_err; \ -}) - -#define __put_dbe_asm(insn) \ -{ \ - __asm__ __volatile__( \ - "1:\t" insn "\t%1,%2\n\t" \ - "move\t%0,$0\n" \ - "2:\n\t" \ - ".section\t.fixup,\"ax\"\n" \ - "3:\tli\t%0,%3\n\t" \ - "j\t2b\n\t" \ - ".previous\n\t" \ - ".section\t__dbe_table,\"a\"\n\t" \ - __PA_ADDR "\t1b, 3b\n\t" \ - ".previous" \ - : "=r" (__pu_err) \ - : "r" (__pu_val), "o" (__mp(__pu_addr)), "i" (-EFAULT)); \ -} - -extern void __put_dbe_unknown(void); - -extern unsigned long search_dbe_table(unsigned long addr); - -#endif /* _ASM_PACCESS_H */ diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h deleted file mode 100644 index fe7a88ea066e..000000000000 --- a/include/asm-mips/page.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 - 1999, 2000, 03 Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_PAGE_H -#define _ASM_PAGE_H - -#include - -/* - * PAGE_SHIFT determines the page size - */ -#ifdef CONFIG_PAGE_SIZE_4KB -#define PAGE_SHIFT 12 -#endif -#ifdef CONFIG_PAGE_SIZE_8KB -#define PAGE_SHIFT 13 -#endif -#ifdef CONFIG_PAGE_SIZE_16KB -#define PAGE_SHIFT 14 -#endif -#ifdef CONFIG_PAGE_SIZE_64KB -#define PAGE_SHIFT 16 -#endif -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) - -#ifndef __ASSEMBLY__ - -#include -#include - -extern void build_clear_page(void); -extern void build_copy_page(void); - -/* - * It's normally defined only for FLATMEM config but it's - * used in our early mem init code for all memory models. - * So always define it. - */ -#define ARCH_PFN_OFFSET PFN_UP(PHYS_OFFSET) - -extern void clear_page(void * page); -extern void copy_page(void * to, void * from); - -extern unsigned long shm_align_mask; - -static inline unsigned long pages_do_alias(unsigned long addr1, - unsigned long addr2) -{ - return (addr1 ^ addr2) & shm_align_mask; -} - -struct page; - -static inline void clear_user_page(void *addr, unsigned long vaddr, - struct page *page) -{ - extern void (*flush_data_cache_page)(unsigned long addr); - - clear_page(addr); - if (pages_do_alias((unsigned long) addr, vaddr & PAGE_MASK)) - flush_data_cache_page((unsigned long)addr); -} - -extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, - struct page *to); -struct vm_area_struct; -extern void copy_user_highpage(struct page *to, struct page *from, - unsigned long vaddr, struct vm_area_struct *vma); - -#define __HAVE_ARCH_COPY_USER_HIGHPAGE - -/* - * These are used to make use of C type-checking.. - */ -#ifdef CONFIG_64BIT_PHYS_ADDR - #ifdef CONFIG_CPU_MIPS32 - typedef struct { unsigned long pte_low, pte_high; } pte_t; - #define pte_val(x) ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) - #define __pte(x) ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) - #else - typedef struct { unsigned long long pte; } pte_t; - #define pte_val(x) ((x).pte) - #define __pte(x) ((pte_t) { (x) } ) - #endif -#else -typedef struct { unsigned long pte; } pte_t; -#define pte_val(x) ((x).pte) -#define __pte(x) ((pte_t) { (x) } ) -#endif -typedef struct page *pgtable_t; - -/* - * For 3-level pagetables we defines these ourselves, for 2-level the - * definitions are supplied by . - */ -#ifdef CONFIG_64BIT - -typedef struct { unsigned long pmd; } pmd_t; -#define pmd_val(x) ((x).pmd) -#define __pmd(x) ((pmd_t) { (x) } ) - -#endif - -/* - * Right now we don't support 4-level pagetables, so all pud-related - * definitions come from . - */ - -/* - * Finall the top of the hierarchy, the pgd - */ -typedef struct { unsigned long pgd; } pgd_t; -#define pgd_val(x) ((x).pgd) -#define __pgd(x) ((pgd_t) { (x) } ) - -/* - * Manipulate page protection bits - */ -typedef struct { unsigned long pgprot; } pgprot_t; -#define pgprot_val(x) ((x).pgprot) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -/* - * On R4000-style MMUs where a TLB entry is mapping a adjacent even / odd - * pair of pages we only have a single global bit per pair of pages. When - * writing to the TLB make sure we always have the bit set for both pages - * or none. This macro is used to access the `buddy' of the pte we're just - * working on. - */ -#define ptep_buddy(x) ((pte_t *)((unsigned long)(x) ^ sizeof(pte_t))) - -#endif /* !__ASSEMBLY__ */ - -/* - * __pa()/__va() should be used only during mem init. - */ -#ifdef CONFIG_64BIT -#define __pa(x) \ -({ \ - unsigned long __x = (unsigned long)(x); \ - __x < CKSEG0 ? XPHYSADDR(__x) : CPHYSADDR(__x); \ -}) -#else -#define __pa(x) \ - ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET) -#endif -#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET)) -#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0)) - -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) - -#ifdef CONFIG_FLATMEM - -#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr) - -#elif defined(CONFIG_SPARSEMEM) - -/* pfn_valid is defined in linux/mmzone.h */ - -#elif defined(CONFIG_NEED_MULTIPLE_NODES) - -#define pfn_valid(pfn) \ -({ \ - unsigned long __pfn = (pfn); \ - int __n = pfn_to_nid(__pfn); \ - ((__n >= 0) ? (__pfn < NODE_DATA(__n)->node_start_pfn + \ - NODE_DATA(__n)->node_spanned_pages) \ - : 0); \ -}) - -#endif - -#define virt_to_page(kaddr) pfn_to_page(PFN_DOWN(virt_to_phys(kaddr))) -#define virt_addr_valid(kaddr) pfn_valid(PFN_DOWN(virt_to_phys(kaddr))) - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE) -#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET) - -#include -#include - -#endif /* _ASM_PAGE_H */ diff --git a/include/asm-mips/param.h b/include/asm-mips/param.h deleted file mode 100644 index 1d9bb8c5ab24..000000000000 --- a/include/asm-mips/param.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright 1994 - 2000, 2002 Ralf Baechle (ralf@gnu.org) - * Copyright 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_PARAM_H -#define _ASM_PARAM_H - -#ifdef __KERNEL__ - -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 65536 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _ASM_PARAM_H */ diff --git a/include/asm-mips/parport.h b/include/asm-mips/parport.h deleted file mode 100644 index f52656826cce..000000000000 --- a/include/asm-mips/parport.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - */ -#ifndef _ASM_PARPORT_H -#define _ASM_PARPORT_H - -static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma); -static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma) -{ - return parport_pc_find_isa_ports(autoirq, autodma); -} - -#endif /* _ASM_PARPORT_H */ diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h deleted file mode 100644 index 5510c53b7feb..000000000000 --- a/include/asm-mips/pci.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef _ASM_PCI_H -#define _ASM_PCI_H - -#include - -#ifdef __KERNEL__ - -/* - * This file essentially defines the interface between board - * specific PCI code and MIPS common PCI code. Should potentially put - * into include/asm/pci.h file. - */ - -#include - -/* - * Each pci channel is a top-level PCI bus seem by CPU. A machine with - * multiple PCI channels may have multiple PCI host controllers or a - * single controller supporting multiple channels. - */ -struct pci_controller { - struct pci_controller *next; - struct pci_bus *bus; - - struct pci_ops *pci_ops; - struct resource *mem_resource; - unsigned long mem_offset; - struct resource *io_resource; - unsigned long io_offset; - unsigned long io_map_base; - - unsigned int index; - /* For compatibility with current (as of July 2003) pciutils - and XFree86. Eventually will be removed. */ - unsigned int need_domain_info; - - int iommu; - - /* Optional access methods for reading/writing the bus number - of the PCI controller */ - int (*get_busno)(void); - void (*set_busno)(int busno); -}; - -/* - * Used by boards to register their PCI busses before the actual scanning. - */ -extern struct pci_controller * alloc_pci_controller(void); -extern void register_pci_controller(struct pci_controller *hose); - -/* - * board supplied pci irq fixup routine - */ -extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); - - -/* Can be used to override the logic in pci_scan_bus for skipping - already-configured bus numbers - to be used for buggy BIOSes - or architectures with incomplete PCI setup by the loader */ - -extern unsigned int pcibios_assign_all_busses(void); - -#define pcibios_scan_all_fns(a, b) 0 - -extern unsigned long PCIBIOS_MIN_IO; -extern unsigned long PCIBIOS_MIN_MEM; - -#define PCIBIOS_MIN_CARDBUS_IO 0x4000 - -extern void pcibios_set_master(struct pci_dev *dev); - -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -/* - * Dynamic DMA mapping stuff. - * MIPS has everything mapped statically. - */ - -#include -#include -#include -#include -#include - -struct pci_dev; - -/* - * The PCI address space does equal the physical memory address space. The - * networking and block device layers use this boolean for bounce buffer - * decisions. This is set if any hose does not have an IOMMU. - */ -extern unsigned int PCI_DMA_BUS_IS_PHYS; - -#ifdef CONFIG_DMA_NEED_PCI_MAP_STATE - -/* pci_unmap_{single,page} is not a nop, thus... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) - -#else /* CONFIG_DMA_NEED_PCI_MAP_STATE */ - -/* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - -#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE */ - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif - -extern void pcibios_resource_to_bus(struct pci_dev *dev, - struct pci_bus_region *region, struct resource *res); - -extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region); - -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - -#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index - -static inline int pci_proc_domain(struct pci_bus *bus) -{ - struct pci_controller *hose = bus->sysdata; - return hose->need_domain_info; -} - -#endif /* __KERNEL__ */ - -/* implement the pci_ DMA API in terms of the generic device dma_ one */ -#include - -/* Do platform specific device initialization at pci_enable_device() time */ -extern int pcibios_plat_dev_init(struct pci_dev *dev); - -/* Chances are this interrupt is wired PC-style ... */ -static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) -{ - return channel ? 15 : 14; -} - -extern int pci_probe_only; - -extern char * (*pcibios_plat_setup)(char *str); - -#endif /* _ASM_PCI_H */ diff --git a/include/asm-mips/pci/bridge.h b/include/asm-mips/pci/bridge.h deleted file mode 100644 index 5f4b9d4e4114..000000000000 --- a/include/asm-mips/pci/bridge.h +++ /dev/null @@ -1,854 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * bridge.h - bridge chip header file, derived from IRIX , - * revision 1.76. - * - * Copyright (C) 1996, 1999 Silcon Graphics, Inc. - * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) - */ -#ifndef _ASM_PCI_BRIDGE_H -#define _ASM_PCI_BRIDGE_H - -#include -#include -#include /* generic widget header */ -#include - -/* I/O page size */ - -#define IOPFNSHIFT 12 /* 4K per mapped page */ - -#define IOPGSIZE (1 << IOPFNSHIFT) -#define IOPG(x) ((x) >> IOPFNSHIFT) -#define IOPGOFF(x) ((x) & (IOPGSIZE-1)) - -/* Bridge RAM sizes */ - -#define BRIDGE_ATE_RAM_SIZE 0x00000400 /* 1kB ATE RAM */ - -#define BRIDGE_CONFIG_BASE 0x20000 -#define BRIDGE_CONFIG1_BASE 0x28000 -#define BRIDGE_CONFIG_END 0x30000 -#define BRIDGE_CONFIG_SLOT_SIZE 0x1000 - -#define BRIDGE_SSRAM_512K 0x00080000 /* 512kB */ -#define BRIDGE_SSRAM_128K 0x00020000 /* 128kB */ -#define BRIDGE_SSRAM_64K 0x00010000 /* 64kB */ -#define BRIDGE_SSRAM_0K 0x00000000 /* 0kB */ - -/* ======================================================================== - * Bridge address map - */ - -#ifndef __ASSEMBLY__ - -/* - * All accesses to bridge hardware registers must be done - * using 32-bit loads and stores. - */ -typedef u32 bridgereg_t; - -typedef u64 bridge_ate_t; - -/* pointers to bridge ATEs - * are always "pointer to volatile" - */ -typedef volatile bridge_ate_t *bridge_ate_p; - -/* - * It is generally preferred that hardware registers on the bridge - * are located from C code via this structure. - * - * Generated from Bridge spec dated 04oct95 - */ - -typedef volatile struct bridge_s { - /* Local Registers 0x000000-0x00FFFF */ - - /* standard widget configuration 0x000000-0x000057 */ - widget_cfg_t b_widget; /* 0x000000 */ - - /* helper fieldnames for accessing bridge widget */ - -#define b_wid_id b_widget.w_id -#define b_wid_stat b_widget.w_status -#define b_wid_err_upper b_widget.w_err_upper_addr -#define b_wid_err_lower b_widget.w_err_lower_addr -#define b_wid_control b_widget.w_control -#define b_wid_req_timeout b_widget.w_req_timeout -#define b_wid_int_upper b_widget.w_intdest_upper_addr -#define b_wid_int_lower b_widget.w_intdest_lower_addr -#define b_wid_err_cmdword b_widget.w_err_cmd_word -#define b_wid_llp b_widget.w_llp_cfg -#define b_wid_tflush b_widget.w_tflush - - /* bridge-specific widget configuration 0x000058-0x00007F */ - bridgereg_t _pad_000058; - bridgereg_t b_wid_aux_err; /* 0x00005C */ - bridgereg_t _pad_000060; - bridgereg_t b_wid_resp_upper; /* 0x000064 */ - bridgereg_t _pad_000068; - bridgereg_t b_wid_resp_lower; /* 0x00006C */ - bridgereg_t _pad_000070; - bridgereg_t b_wid_tst_pin_ctrl; /* 0x000074 */ - bridgereg_t _pad_000078[2]; - - /* PMU & Map 0x000080-0x00008F */ - bridgereg_t _pad_000080; - bridgereg_t b_dir_map; /* 0x000084 */ - bridgereg_t _pad_000088[2]; - - /* SSRAM 0x000090-0x00009F */ - bridgereg_t _pad_000090; - bridgereg_t b_ram_perr; /* 0x000094 */ - bridgereg_t _pad_000098[2]; - - /* Arbitration 0x0000A0-0x0000AF */ - bridgereg_t _pad_0000A0; - bridgereg_t b_arb; /* 0x0000A4 */ - bridgereg_t _pad_0000A8[2]; - - /* Number In A Can 0x0000B0-0x0000BF */ - bridgereg_t _pad_0000B0; - bridgereg_t b_nic; /* 0x0000B4 */ - bridgereg_t _pad_0000B8[2]; - - /* PCI/GIO 0x0000C0-0x0000FF */ - bridgereg_t _pad_0000C0; - bridgereg_t b_bus_timeout; /* 0x0000C4 */ -#define b_pci_bus_timeout b_bus_timeout - - bridgereg_t _pad_0000C8; - bridgereg_t b_pci_cfg; /* 0x0000CC */ - bridgereg_t _pad_0000D0; - bridgereg_t b_pci_err_upper; /* 0x0000D4 */ - bridgereg_t _pad_0000D8; - bridgereg_t b_pci_err_lower; /* 0x0000DC */ - bridgereg_t _pad_0000E0[8]; -#define b_gio_err_lower b_pci_err_lower -#define b_gio_err_upper b_pci_err_upper - - /* Interrupt 0x000100-0x0001FF */ - bridgereg_t _pad_000100; - bridgereg_t b_int_status; /* 0x000104 */ - bridgereg_t _pad_000108; - bridgereg_t b_int_enable; /* 0x00010C */ - bridgereg_t _pad_000110; - bridgereg_t b_int_rst_stat; /* 0x000114 */ - bridgereg_t _pad_000118; - bridgereg_t b_int_mode; /* 0x00011C */ - bridgereg_t _pad_000120; - bridgereg_t b_int_device; /* 0x000124 */ - bridgereg_t _pad_000128; - bridgereg_t b_int_host_err; /* 0x00012C */ - - struct { - bridgereg_t __pad; /* 0x0001{30,,,68} */ - bridgereg_t addr; /* 0x0001{34,,,6C} */ - } b_int_addr[8]; /* 0x000130 */ - - bridgereg_t _pad_000170[36]; - - /* Device 0x000200-0x0003FF */ - struct { - bridgereg_t __pad; /* 0x0002{00,,,38} */ - bridgereg_t reg; /* 0x0002{04,,,3C} */ - } b_device[8]; /* 0x000200 */ - - struct { - bridgereg_t __pad; /* 0x0002{40,,,78} */ - bridgereg_t reg; /* 0x0002{44,,,7C} */ - } b_wr_req_buf[8]; /* 0x000240 */ - - struct { - bridgereg_t __pad; /* 0x0002{80,,,88} */ - bridgereg_t reg; /* 0x0002{84,,,8C} */ - } b_rrb_map[2]; /* 0x000280 */ -#define b_even_resp b_rrb_map[0].reg /* 0x000284 */ -#define b_odd_resp b_rrb_map[1].reg /* 0x00028C */ - - bridgereg_t _pad_000290; - bridgereg_t b_resp_status; /* 0x000294 */ - bridgereg_t _pad_000298; - bridgereg_t b_resp_clear; /* 0x00029C */ - - bridgereg_t _pad_0002A0[24]; - - char _pad_000300[0x10000 - 0x000300]; - - /* Internal Address Translation Entry RAM 0x010000-0x0103FF */ - union { - bridge_ate_t wr; /* write-only */ - struct { - bridgereg_t _p_pad; - bridgereg_t rd; /* read-only */ - } hi; - } b_int_ate_ram[128]; - - char _pad_010400[0x11000 - 0x010400]; - - /* Internal Address Translation Entry RAM LOW 0x011000-0x0113FF */ - struct { - bridgereg_t _p_pad; - bridgereg_t rd; /* read-only */ - } b_int_ate_ram_lo[128]; - - char _pad_011400[0x20000 - 0x011400]; - - /* PCI Device Configuration Spaces 0x020000-0x027FFF */ - union { /* make all access sizes available. */ - u8 c[0x1000 / 1]; - u16 s[0x1000 / 2]; - u32 l[0x1000 / 4]; - u64 d[0x1000 / 8]; - union { - u8 c[0x100 / 1]; - u16 s[0x100 / 2]; - u32 l[0x100 / 4]; - u64 d[0x100 / 8]; - } f[8]; - } b_type0_cfg_dev[8]; /* 0x020000 */ - - /* PCI Type 1 Configuration Space 0x028000-0x028FFF */ - union { /* make all access sizes available. */ - u8 c[0x1000 / 1]; - u16 s[0x1000 / 2]; - u32 l[0x1000 / 4]; - u64 d[0x1000 / 8]; - } b_type1_cfg; /* 0x028000-0x029000 */ - - char _pad_029000[0x007000]; /* 0x029000-0x030000 */ - - /* PCI Interrupt Acknowledge Cycle 0x030000 */ - union { - u8 c[8 / 1]; - u16 s[8 / 2]; - u32 l[8 / 4]; - u64 d[8 / 8]; - } b_pci_iack; /* 0x030000 */ - - u8 _pad_030007[0x04fff8]; /* 0x030008-0x07FFFF */ - - /* External Address Translation Entry RAM 0x080000-0x0FFFFF */ - bridge_ate_t b_ext_ate_ram[0x10000]; - - /* Reserved 0x100000-0x1FFFFF */ - char _pad_100000[0x200000-0x100000]; - - /* PCI/GIO Device Spaces 0x200000-0xBFFFFF */ - union { /* make all access sizes available. */ - u8 c[0x100000 / 1]; - u16 s[0x100000 / 2]; - u32 l[0x100000 / 4]; - u64 d[0x100000 / 8]; - } b_devio_raw[10]; /* 0x200000 */ - - /* b_devio macro is a bit strange; it reflects the - * fact that the Bridge ASIC provides 2M for the - * first two DevIO windows and 1M for the other six. - */ -#define b_devio(n) b_devio_raw[((n)<2)?(n*2):(n+2)] - - /* External Flash Proms 1,0 0xC00000-0xFFFFFF */ - union { /* make all access sizes available. */ - u8 c[0x400000 / 1]; /* read-only */ - u16 s[0x400000 / 2]; /* read-write */ - u32 l[0x400000 / 4]; /* read-only */ - u64 d[0x400000 / 8]; /* read-only */ - } b_external_flash; /* 0xC00000 */ -} bridge_t; - -/* - * Field formats for Error Command Word and Auxillary Error Command Word - * of bridge. - */ -typedef struct bridge_err_cmdword_s { - union { - u32 cmd_word; - struct { - u32 didn:4, /* Destination ID */ - sidn:4, /* Source ID */ - pactyp:4, /* Packet type */ - tnum:5, /* Trans Number */ - coh:1, /* Coh Transacti */ - ds:2, /* Data size */ - gbr:1, /* GBR enable */ - vbpm:1, /* VBPM message */ - error:1, /* Error occurred */ - barr:1, /* Barrier op */ - rsvd:8; - } berr_st; - } berr_un; -} bridge_err_cmdword_t; - -#define berr_field berr_un.berr_st -#endif /* !__ASSEMBLY__ */ - -/* - * The values of these macros can and should be crosschecked - * regularly against the offsets of the like-named fields - * within the "bridge_t" structure above. - */ - -/* Byte offset macros for Bridge internal registers */ - -#define BRIDGE_WID_ID WIDGET_ID -#define BRIDGE_WID_STAT WIDGET_STATUS -#define BRIDGE_WID_ERR_UPPER WIDGET_ERR_UPPER_ADDR -#define BRIDGE_WID_ERR_LOWER WIDGET_ERR_LOWER_ADDR -#define BRIDGE_WID_CONTROL WIDGET_CONTROL -#define BRIDGE_WID_REQ_TIMEOUT WIDGET_REQ_TIMEOUT -#define BRIDGE_WID_INT_UPPER WIDGET_INTDEST_UPPER_ADDR -#define BRIDGE_WID_INT_LOWER WIDGET_INTDEST_LOWER_ADDR -#define BRIDGE_WID_ERR_CMDWORD WIDGET_ERR_CMD_WORD -#define BRIDGE_WID_LLP WIDGET_LLP_CFG -#define BRIDGE_WID_TFLUSH WIDGET_TFLUSH - -#define BRIDGE_WID_AUX_ERR 0x00005C /* Aux Error Command Word */ -#define BRIDGE_WID_RESP_UPPER 0x000064 /* Response Buf Upper Addr */ -#define BRIDGE_WID_RESP_LOWER 0x00006C /* Response Buf Lower Addr */ -#define BRIDGE_WID_TST_PIN_CTRL 0x000074 /* Test pin control */ - -#define BRIDGE_DIR_MAP 0x000084 /* Direct Map reg */ - -#define BRIDGE_RAM_PERR 0x000094 /* SSRAM Parity Error */ - -#define BRIDGE_ARB 0x0000A4 /* Arbitration Priority reg */ - -#define BRIDGE_NIC 0x0000B4 /* Number In A Can */ - -#define BRIDGE_BUS_TIMEOUT 0x0000C4 /* Bus Timeout Register */ -#define BRIDGE_PCI_BUS_TIMEOUT BRIDGE_BUS_TIMEOUT -#define BRIDGE_PCI_CFG 0x0000CC /* PCI Type 1 Config reg */ -#define BRIDGE_PCI_ERR_UPPER 0x0000D4 /* PCI error Upper Addr */ -#define BRIDGE_PCI_ERR_LOWER 0x0000DC /* PCI error Lower Addr */ - -#define BRIDGE_INT_STATUS 0x000104 /* Interrupt Status */ -#define BRIDGE_INT_ENABLE 0x00010C /* Interrupt Enables */ -#define BRIDGE_INT_RST_STAT 0x000114 /* Reset Intr Status */ -#define BRIDGE_INT_MODE 0x00011C /* Interrupt Mode */ -#define BRIDGE_INT_DEVICE 0x000124 /* Interrupt Device */ -#define BRIDGE_INT_HOST_ERR 0x00012C /* Host Error Field */ - -#define BRIDGE_INT_ADDR0 0x000134 /* Host Address Reg */ -#define BRIDGE_INT_ADDR_OFF 0x000008 /* Host Addr offset (1..7) */ -#define BRIDGE_INT_ADDR(x) (BRIDGE_INT_ADDR0+(x)*BRIDGE_INT_ADDR_OFF) - -#define BRIDGE_DEVICE0 0x000204 /* Device 0 */ -#define BRIDGE_DEVICE_OFF 0x000008 /* Device offset (1..7) */ -#define BRIDGE_DEVICE(x) (BRIDGE_DEVICE0+(x)*BRIDGE_DEVICE_OFF) - -#define BRIDGE_WR_REQ_BUF0 0x000244 /* Write Request Buffer 0 */ -#define BRIDGE_WR_REQ_BUF_OFF 0x000008 /* Buffer Offset (1..7) */ -#define BRIDGE_WR_REQ_BUF(x) (BRIDGE_WR_REQ_BUF0+(x)*BRIDGE_WR_REQ_BUF_OFF) - -#define BRIDGE_EVEN_RESP 0x000284 /* Even Device Response Buf */ -#define BRIDGE_ODD_RESP 0x00028C /* Odd Device Response Buf */ - -#define BRIDGE_RESP_STATUS 0x000294 /* Read Response Status reg */ -#define BRIDGE_RESP_CLEAR 0x00029C /* Read Response Clear reg */ - -/* Byte offset macros for Bridge I/O space */ - -#define BRIDGE_ATE_RAM 0x00010000 /* Internal Addr Xlat Ram */ - -#define BRIDGE_TYPE0_CFG_DEV0 0x00020000 /* Type 0 Cfg, Device 0 */ -#define BRIDGE_TYPE0_CFG_SLOT_OFF 0x00001000 /* Type 0 Cfg Slot Offset (1..7) */ -#define BRIDGE_TYPE0_CFG_FUNC_OFF 0x00000100 /* Type 0 Cfg Func Offset (1..7) */ -#define BRIDGE_TYPE0_CFG_DEV(s) (BRIDGE_TYPE0_CFG_DEV0+\ - (s)*BRIDGE_TYPE0_CFG_SLOT_OFF) -#define BRIDGE_TYPE0_CFG_DEVF(s, f) (BRIDGE_TYPE0_CFG_DEV0+\ - (s)*BRIDGE_TYPE0_CFG_SLOT_OFF+\ - (f)*BRIDGE_TYPE0_CFG_FUNC_OFF) - -#define BRIDGE_TYPE1_CFG 0x00028000 /* Type 1 Cfg space */ - -#define BRIDGE_PCI_IACK 0x00030000 /* PCI Interrupt Ack */ -#define BRIDGE_EXT_SSRAM 0x00080000 /* Extern SSRAM (ATE) */ - -/* Byte offset macros for Bridge device IO spaces */ - -#define BRIDGE_DEV_CNT 8 /* Up to 8 devices per bridge */ -#define BRIDGE_DEVIO0 0x00200000 /* Device IO 0 Addr */ -#define BRIDGE_DEVIO1 0x00400000 /* Device IO 1 Addr */ -#define BRIDGE_DEVIO2 0x00600000 /* Device IO 2 Addr */ -#define BRIDGE_DEVIO_OFF 0x00100000 /* Device IO Offset (3..7) */ - -#define BRIDGE_DEVIO_2MB 0x00200000 /* Device IO Offset (0..1) */ -#define BRIDGE_DEVIO_1MB 0x00100000 /* Device IO Offset (2..7) */ - -#define BRIDGE_DEVIO(x) ((x)<=1 ? BRIDGE_DEVIO0+(x)*BRIDGE_DEVIO_2MB : BRIDGE_DEVIO2+((x)-2)*BRIDGE_DEVIO_1MB) - -#define BRIDGE_EXTERNAL_FLASH 0x00C00000 /* External Flash PROMS */ - -/* ======================================================================== - * Bridge register bit field definitions - */ - -/* Widget part number of bridge */ -#define BRIDGE_WIDGET_PART_NUM 0xc002 -#define XBRIDGE_WIDGET_PART_NUM 0xd002 - -/* Manufacturer of bridge */ -#define BRIDGE_WIDGET_MFGR_NUM 0x036 -#define XBRIDGE_WIDGET_MFGR_NUM 0x024 - -/* Revision numbers for known Bridge revisions */ -#define BRIDGE_REV_A 0x1 -#define BRIDGE_REV_B 0x2 -#define BRIDGE_REV_C 0x3 -#define BRIDGE_REV_D 0x4 - -/* Bridge widget status register bits definition */ - -#define BRIDGE_STAT_LLP_REC_CNT (0xFFu << 24) -#define BRIDGE_STAT_LLP_TX_CNT (0xFF << 16) -#define BRIDGE_STAT_FLASH_SELECT (0x1 << 6) -#define BRIDGE_STAT_PCI_GIO_N (0x1 << 5) -#define BRIDGE_STAT_PENDING (0x1F << 0) - -/* Bridge widget control register bits definition */ -#define BRIDGE_CTRL_FLASH_WR_EN (0x1ul << 31) -#define BRIDGE_CTRL_EN_CLK50 (0x1 << 30) -#define BRIDGE_CTRL_EN_CLK40 (0x1 << 29) -#define BRIDGE_CTRL_EN_CLK33 (0x1 << 28) -#define BRIDGE_CTRL_RST(n) ((n) << 24) -#define BRIDGE_CTRL_RST_MASK (BRIDGE_CTRL_RST(0xF)) -#define BRIDGE_CTRL_RST_PIN(x) (BRIDGE_CTRL_RST(0x1 << (x))) -#define BRIDGE_CTRL_IO_SWAP (0x1 << 23) -#define BRIDGE_CTRL_MEM_SWAP (0x1 << 22) -#define BRIDGE_CTRL_PAGE_SIZE (0x1 << 21) -#define BRIDGE_CTRL_SS_PAR_BAD (0x1 << 20) -#define BRIDGE_CTRL_SS_PAR_EN (0x1 << 19) -#define BRIDGE_CTRL_SSRAM_SIZE(n) ((n) << 17) -#define BRIDGE_CTRL_SSRAM_SIZE_MASK (BRIDGE_CTRL_SSRAM_SIZE(0x3)) -#define BRIDGE_CTRL_SSRAM_512K (BRIDGE_CTRL_SSRAM_SIZE(0x3)) -#define BRIDGE_CTRL_SSRAM_128K (BRIDGE_CTRL_SSRAM_SIZE(0x2)) -#define BRIDGE_CTRL_SSRAM_64K (BRIDGE_CTRL_SSRAM_SIZE(0x1)) -#define BRIDGE_CTRL_SSRAM_1K (BRIDGE_CTRL_SSRAM_SIZE(0x0)) -#define BRIDGE_CTRL_F_BAD_PKT (0x1 << 16) -#define BRIDGE_CTRL_LLP_XBAR_CRD(n) ((n) << 12) -#define BRIDGE_CTRL_LLP_XBAR_CRD_MASK (BRIDGE_CTRL_LLP_XBAR_CRD(0xf)) -#define BRIDGE_CTRL_CLR_RLLP_CNT (0x1 << 11) -#define BRIDGE_CTRL_CLR_TLLP_CNT (0x1 << 10) -#define BRIDGE_CTRL_SYS_END (0x1 << 9) -#define BRIDGE_CTRL_MAX_TRANS(n) ((n) << 4) -#define BRIDGE_CTRL_MAX_TRANS_MASK (BRIDGE_CTRL_MAX_TRANS(0x1f)) -#define BRIDGE_CTRL_WIDGET_ID(n) ((n) << 0) -#define BRIDGE_CTRL_WIDGET_ID_MASK (BRIDGE_CTRL_WIDGET_ID(0xf)) - -/* Bridge Response buffer Error Upper Register bit fields definition */ -#define BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT (20) -#define BRIDGE_RESP_ERRUPPR_DEVNUM_MASK (0x7 << BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT) -#define BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT (16) -#define BRIDGE_RESP_ERRUPPR_BUFNUM_MASK (0xF << BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT) -#define BRIDGE_RESP_ERRRUPPR_BUFMASK (0xFFFF) - -#define BRIDGE_RESP_ERRUPPR_BUFNUM(x) \ - (((x) & BRIDGE_RESP_ERRUPPR_BUFNUM_MASK) >> \ - BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT) - -#define BRIDGE_RESP_ERRUPPR_DEVICE(x) \ - (((x) & BRIDGE_RESP_ERRUPPR_DEVNUM_MASK) >> \ - BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT) - -/* Bridge direct mapping register bits definition */ -#define BRIDGE_DIRMAP_W_ID_SHFT 20 -#define BRIDGE_DIRMAP_W_ID (0xf << BRIDGE_DIRMAP_W_ID_SHFT) -#define BRIDGE_DIRMAP_RMF_64 (0x1 << 18) -#define BRIDGE_DIRMAP_ADD512 (0x1 << 17) -#define BRIDGE_DIRMAP_OFF (0x1ffff << 0) -#define BRIDGE_DIRMAP_OFF_ADDRSHFT (31) /* lsbit of DIRMAP_OFF is xtalk address bit 31 */ - -/* Bridge Arbitration register bits definition */ -#define BRIDGE_ARB_REQ_WAIT_TICK(x) ((x) << 16) -#define BRIDGE_ARB_REQ_WAIT_TICK_MASK BRIDGE_ARB_REQ_WAIT_TICK(0x3) -#define BRIDGE_ARB_REQ_WAIT_EN(x) ((x) << 8) -#define BRIDGE_ARB_REQ_WAIT_EN_MASK BRIDGE_ARB_REQ_WAIT_EN(0xff) -#define BRIDGE_ARB_FREEZE_GNT (1 << 6) -#define BRIDGE_ARB_HPRI_RING_B2 (1 << 5) -#define BRIDGE_ARB_HPRI_RING_B1 (1 << 4) -#define BRIDGE_ARB_HPRI_RING_B0 (1 << 3) -#define BRIDGE_ARB_LPRI_RING_B2 (1 << 2) -#define BRIDGE_ARB_LPRI_RING_B1 (1 << 1) -#define BRIDGE_ARB_LPRI_RING_B0 (1 << 0) - -/* Bridge Bus time-out register bits definition */ -#define BRIDGE_BUS_PCI_RETRY_HLD(x) ((x) << 16) -#define BRIDGE_BUS_PCI_RETRY_HLD_MASK BRIDGE_BUS_PCI_RETRY_HLD(0x1f) -#define BRIDGE_BUS_GIO_TIMEOUT (1 << 12) -#define BRIDGE_BUS_PCI_RETRY_CNT(x) ((x) << 0) -#define BRIDGE_BUS_PCI_RETRY_MASK BRIDGE_BUS_PCI_RETRY_CNT(0x3ff) - -/* Bridge interrupt status register bits definition */ -#define BRIDGE_ISR_MULTI_ERR (0x1u << 31) -#define BRIDGE_ISR_PMU_ESIZE_FAULT (0x1 << 30) -#define BRIDGE_ISR_UNEXP_RESP (0x1 << 29) -#define BRIDGE_ISR_BAD_XRESP_PKT (0x1 << 28) -#define BRIDGE_ISR_BAD_XREQ_PKT (0x1 << 27) -#define BRIDGE_ISR_RESP_XTLK_ERR (0x1 << 26) -#define BRIDGE_ISR_REQ_XTLK_ERR (0x1 << 25) -#define BRIDGE_ISR_INVLD_ADDR (0x1 << 24) -#define BRIDGE_ISR_UNSUPPORTED_XOP (0x1 << 23) -#define BRIDGE_ISR_XREQ_FIFO_OFLOW (0x1 << 22) -#define BRIDGE_ISR_LLP_REC_SNERR (0x1 << 21) -#define BRIDGE_ISR_LLP_REC_CBERR (0x1 << 20) -#define BRIDGE_ISR_LLP_RCTY (0x1 << 19) -#define BRIDGE_ISR_LLP_TX_RETRY (0x1 << 18) -#define BRIDGE_ISR_LLP_TCTY (0x1 << 17) -#define BRIDGE_ISR_SSRAM_PERR (0x1 << 16) -#define BRIDGE_ISR_PCI_ABORT (0x1 << 15) -#define BRIDGE_ISR_PCI_PARITY (0x1 << 14) -#define BRIDGE_ISR_PCI_SERR (0x1 << 13) -#define BRIDGE_ISR_PCI_PERR (0x1 << 12) -#define BRIDGE_ISR_PCI_MST_TIMEOUT (0x1 << 11) -#define BRIDGE_ISR_GIO_MST_TIMEOUT BRIDGE_ISR_PCI_MST_TIMEOUT -#define BRIDGE_ISR_PCI_RETRY_CNT (0x1 << 10) -#define BRIDGE_ISR_XREAD_REQ_TIMEOUT (0x1 << 9) -#define BRIDGE_ISR_GIO_B_ENBL_ERR (0x1 << 8) -#define BRIDGE_ISR_INT_MSK (0xff << 0) -#define BRIDGE_ISR_INT(x) (0x1 << (x)) - -#define BRIDGE_ISR_LINK_ERROR \ - (BRIDGE_ISR_LLP_REC_SNERR|BRIDGE_ISR_LLP_REC_CBERR| \ - BRIDGE_ISR_LLP_RCTY|BRIDGE_ISR_LLP_TX_RETRY| \ - BRIDGE_ISR_LLP_TCTY) - -#define BRIDGE_ISR_PCIBUS_PIOERR \ - (BRIDGE_ISR_PCI_MST_TIMEOUT|BRIDGE_ISR_PCI_ABORT) - -#define BRIDGE_ISR_PCIBUS_ERROR \ - (BRIDGE_ISR_PCIBUS_PIOERR|BRIDGE_ISR_PCI_PERR| \ - BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_RETRY_CNT| \ - BRIDGE_ISR_PCI_PARITY) - -#define BRIDGE_ISR_XTALK_ERROR \ - (BRIDGE_ISR_XREAD_REQ_TIMEOUT|BRIDGE_ISR_XREQ_FIFO_OFLOW|\ - BRIDGE_ISR_UNSUPPORTED_XOP|BRIDGE_ISR_INVLD_ADDR| \ - BRIDGE_ISR_REQ_XTLK_ERR|BRIDGE_ISR_RESP_XTLK_ERR| \ - BRIDGE_ISR_BAD_XREQ_PKT|BRIDGE_ISR_BAD_XRESP_PKT| \ - BRIDGE_ISR_UNEXP_RESP) - -#define BRIDGE_ISR_ERRORS \ - (BRIDGE_ISR_LINK_ERROR|BRIDGE_ISR_PCIBUS_ERROR| \ - BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR| \ - BRIDGE_ISR_PMU_ESIZE_FAULT) - -/* - * List of Errors which are fatal and kill the system - */ -#define BRIDGE_ISR_ERROR_FATAL \ - ((BRIDGE_ISR_XTALK_ERROR & ~BRIDGE_ISR_XREAD_REQ_TIMEOUT)|\ - BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_PARITY ) - -#define BRIDGE_ISR_ERROR_DUMP \ - (BRIDGE_ISR_PCIBUS_ERROR|BRIDGE_ISR_PMU_ESIZE_FAULT| \ - BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR) - -/* Bridge interrupt enable register bits definition */ -#define BRIDGE_IMR_UNEXP_RESP BRIDGE_ISR_UNEXP_RESP -#define BRIDGE_IMR_PMU_ESIZE_FAULT BRIDGE_ISR_PMU_ESIZE_FAULT -#define BRIDGE_IMR_BAD_XRESP_PKT BRIDGE_ISR_BAD_XRESP_PKT -#define BRIDGE_IMR_BAD_XREQ_PKT BRIDGE_ISR_BAD_XREQ_PKT -#define BRIDGE_IMR_RESP_XTLK_ERR BRIDGE_ISR_RESP_XTLK_ERR -#define BRIDGE_IMR_REQ_XTLK_ERR BRIDGE_ISR_REQ_XTLK_ERR -#define BRIDGE_IMR_INVLD_ADDR BRIDGE_ISR_INVLD_ADDR -#define BRIDGE_IMR_UNSUPPORTED_XOP BRIDGE_ISR_UNSUPPORTED_XOP -#define BRIDGE_IMR_XREQ_FIFO_OFLOW BRIDGE_ISR_XREQ_FIFO_OFLOW -#define BRIDGE_IMR_LLP_REC_SNERR BRIDGE_ISR_LLP_REC_SNERR -#define BRIDGE_IMR_LLP_REC_CBERR BRIDGE_ISR_LLP_REC_CBERR -#define BRIDGE_IMR_LLP_RCTY BRIDGE_ISR_LLP_RCTY -#define BRIDGE_IMR_LLP_TX_RETRY BRIDGE_ISR_LLP_TX_RETRY -#define BRIDGE_IMR_LLP_TCTY BRIDGE_ISR_LLP_TCTY -#define BRIDGE_IMR_SSRAM_PERR BRIDGE_ISR_SSRAM_PERR -#define BRIDGE_IMR_PCI_ABORT BRIDGE_ISR_PCI_ABORT -#define BRIDGE_IMR_PCI_PARITY BRIDGE_ISR_PCI_PARITY -#define BRIDGE_IMR_PCI_SERR BRIDGE_ISR_PCI_SERR -#define BRIDGE_IMR_PCI_PERR BRIDGE_ISR_PCI_PERR -#define BRIDGE_IMR_PCI_MST_TIMEOUT BRIDGE_ISR_PCI_MST_TIMEOUT -#define BRIDGE_IMR_GIO_MST_TIMEOUT BRIDGE_ISR_GIO_MST_TIMEOUT -#define BRIDGE_IMR_PCI_RETRY_CNT BRIDGE_ISR_PCI_RETRY_CNT -#define BRIDGE_IMR_XREAD_REQ_TIMEOUT BRIDGE_ISR_XREAD_REQ_TIMEOUT -#define BRIDGE_IMR_GIO_B_ENBL_ERR BRIDGE_ISR_GIO_B_ENBL_ERR -#define BRIDGE_IMR_INT_MSK BRIDGE_ISR_INT_MSK -#define BRIDGE_IMR_INT(x) BRIDGE_ISR_INT(x) - -/* Bridge interrupt reset register bits definition */ -#define BRIDGE_IRR_MULTI_CLR (0x1 << 6) -#define BRIDGE_IRR_CRP_GRP_CLR (0x1 << 5) -#define BRIDGE_IRR_RESP_BUF_GRP_CLR (0x1 << 4) -#define BRIDGE_IRR_REQ_DSP_GRP_CLR (0x1 << 3) -#define BRIDGE_IRR_LLP_GRP_CLR (0x1 << 2) -#define BRIDGE_IRR_SSRAM_GRP_CLR (0x1 << 1) -#define BRIDGE_IRR_PCI_GRP_CLR (0x1 << 0) -#define BRIDGE_IRR_GIO_GRP_CLR (0x1 << 0) -#define BRIDGE_IRR_ALL_CLR 0x7f - -#define BRIDGE_IRR_CRP_GRP (BRIDGE_ISR_UNEXP_RESP | \ - BRIDGE_ISR_XREQ_FIFO_OFLOW) -#define BRIDGE_IRR_RESP_BUF_GRP (BRIDGE_ISR_BAD_XRESP_PKT | \ - BRIDGE_ISR_RESP_XTLK_ERR | \ - BRIDGE_ISR_XREAD_REQ_TIMEOUT) -#define BRIDGE_IRR_REQ_DSP_GRP (BRIDGE_ISR_UNSUPPORTED_XOP | \ - BRIDGE_ISR_BAD_XREQ_PKT | \ - BRIDGE_ISR_REQ_XTLK_ERR | \ - BRIDGE_ISR_INVLD_ADDR) -#define BRIDGE_IRR_LLP_GRP (BRIDGE_ISR_LLP_REC_SNERR | \ - BRIDGE_ISR_LLP_REC_CBERR | \ - BRIDGE_ISR_LLP_RCTY | \ - BRIDGE_ISR_LLP_TX_RETRY | \ - BRIDGE_ISR_LLP_TCTY) -#define BRIDGE_IRR_SSRAM_GRP (BRIDGE_ISR_SSRAM_PERR | \ - BRIDGE_ISR_PMU_ESIZE_FAULT) -#define BRIDGE_IRR_PCI_GRP (BRIDGE_ISR_PCI_ABORT | \ - BRIDGE_ISR_PCI_PARITY | \ - BRIDGE_ISR_PCI_SERR | \ - BRIDGE_ISR_PCI_PERR | \ - BRIDGE_ISR_PCI_MST_TIMEOUT | \ - BRIDGE_ISR_PCI_RETRY_CNT) - -#define BRIDGE_IRR_GIO_GRP (BRIDGE_ISR_GIO_B_ENBL_ERR | \ - BRIDGE_ISR_GIO_MST_TIMEOUT) - -/* Bridge INT_DEV register bits definition */ -#define BRIDGE_INT_DEV_SHFT(n) ((n)*3) -#define BRIDGE_INT_DEV_MASK(n) (0x7 << BRIDGE_INT_DEV_SHFT(n)) -#define BRIDGE_INT_DEV_SET(_dev, _line) (_dev << BRIDGE_INT_DEV_SHFT(_line)) - -/* Bridge interrupt(x) register bits definition */ -#define BRIDGE_INT_ADDR_HOST 0x0003FF00 -#define BRIDGE_INT_ADDR_FLD 0x000000FF - -#define BRIDGE_TMO_PCI_RETRY_HLD_MASK 0x1f0000 -#define BRIDGE_TMO_GIO_TIMEOUT_MASK 0x001000 -#define BRIDGE_TMO_PCI_RETRY_CNT_MASK 0x0003ff - -#define BRIDGE_TMO_PCI_RETRY_CNT_MAX 0x3ff - -/* - * The NASID should be shifted by this amount and stored into the - * interrupt(x) register. - */ -#define BRIDGE_INT_ADDR_NASID_SHFT 8 - -/* - * The BRIDGE_INT_ADDR_DEST_IO bit should be set to send an interrupt to - * memory. - */ -#define BRIDGE_INT_ADDR_DEST_IO (1 << 17) -#define BRIDGE_INT_ADDR_DEST_MEM 0 -#define BRIDGE_INT_ADDR_MASK (1 << 17) - -/* Bridge device(x) register bits definition */ -#define BRIDGE_DEV_ERR_LOCK_EN 0x10000000 -#define BRIDGE_DEV_PAGE_CHK_DIS 0x08000000 -#define BRIDGE_DEV_FORCE_PCI_PAR 0x04000000 -#define BRIDGE_DEV_VIRTUAL_EN 0x02000000 -#define BRIDGE_DEV_PMU_WRGA_EN 0x01000000 -#define BRIDGE_DEV_DIR_WRGA_EN 0x00800000 -#define BRIDGE_DEV_DEV_SIZE 0x00400000 -#define BRIDGE_DEV_RT 0x00200000 -#define BRIDGE_DEV_SWAP_PMU 0x00100000 -#define BRIDGE_DEV_SWAP_DIR 0x00080000 -#define BRIDGE_DEV_PREF 0x00040000 -#define BRIDGE_DEV_PRECISE 0x00020000 -#define BRIDGE_DEV_COH 0x00010000 -#define BRIDGE_DEV_BARRIER 0x00008000 -#define BRIDGE_DEV_GBR 0x00004000 -#define BRIDGE_DEV_DEV_SWAP 0x00002000 -#define BRIDGE_DEV_DEV_IO_MEM 0x00001000 -#define BRIDGE_DEV_OFF_MASK 0x00000fff -#define BRIDGE_DEV_OFF_ADDR_SHFT 20 - -#define BRIDGE_DEV_PMU_BITS (BRIDGE_DEV_PMU_WRGA_EN | \ - BRIDGE_DEV_SWAP_PMU) -#define BRIDGE_DEV_D32_BITS (BRIDGE_DEV_DIR_WRGA_EN | \ - BRIDGE_DEV_SWAP_DIR | \ - BRIDGE_DEV_PREF | \ - BRIDGE_DEV_PRECISE | \ - BRIDGE_DEV_COH | \ - BRIDGE_DEV_BARRIER) -#define BRIDGE_DEV_D64_BITS (BRIDGE_DEV_DIR_WRGA_EN | \ - BRIDGE_DEV_SWAP_DIR | \ - BRIDGE_DEV_COH | \ - BRIDGE_DEV_BARRIER) - -/* Bridge Error Upper register bit field definition */ -#define BRIDGE_ERRUPPR_DEVMASTER (0x1 << 20) /* Device was master */ -#define BRIDGE_ERRUPPR_PCIVDEV (0x1 << 19) /* Virtual Req value */ -#define BRIDGE_ERRUPPR_DEVNUM_SHFT (16) -#define BRIDGE_ERRUPPR_DEVNUM_MASK (0x7 << BRIDGE_ERRUPPR_DEVNUM_SHFT) -#define BRIDGE_ERRUPPR_DEVICE(err) (((err) >> BRIDGE_ERRUPPR_DEVNUM_SHFT) & 0x7) -#define BRIDGE_ERRUPPR_ADDRMASK (0xFFFF) - -/* Bridge interrupt mode register bits definition */ -#define BRIDGE_INTMODE_CLR_PKT_EN(x) (0x1 << (x)) - -/* this should be written to the xbow's link_control(x) register */ -#define BRIDGE_CREDIT 3 - -/* RRB assignment register */ -#define BRIDGE_RRB_EN 0x8 /* after shifting down */ -#define BRIDGE_RRB_DEV 0x7 /* after shifting down */ -#define BRIDGE_RRB_VDEV 0x4 /* after shifting down */ -#define BRIDGE_RRB_PDEV 0x3 /* after shifting down */ - -/* RRB status register */ -#define BRIDGE_RRB_VALID(r) (0x00010000<<(r)) -#define BRIDGE_RRB_INUSE(r) (0x00000001<<(r)) - -/* RRB clear register */ -#define BRIDGE_RRB_CLEAR(r) (0x00000001<<(r)) - -/* xbox system controller declarations */ -#define XBOX_BRIDGE_WID 8 -#define FLASH_PROM1_BASE 0xE00000 /* To read the xbox sysctlr status */ -#define XBOX_RPS_EXISTS 1 << 6 /* RPS bit in status register */ -#define XBOX_RPS_FAIL 1 << 4 /* RPS status bit in register */ - -/* ======================================================================== - */ -/* - * Macros for Xtalk to Bridge bus (PCI/GIO) PIO - * refer to section 4.2.1 of Bridge Spec for xtalk to PCI/GIO PIO mappings - */ -/* XTALK addresses that map into Bridge Bus addr space */ -#define BRIDGE_PIO32_XTALK_ALIAS_BASE 0x000040000000L -#define BRIDGE_PIO32_XTALK_ALIAS_LIMIT 0x00007FFFFFFFL -#define BRIDGE_PIO64_XTALK_ALIAS_BASE 0x000080000000L -#define BRIDGE_PIO64_XTALK_ALIAS_LIMIT 0x0000BFFFFFFFL -#define BRIDGE_PCIIO_XTALK_ALIAS_BASE 0x000100000000L -#define BRIDGE_PCIIO_XTALK_ALIAS_LIMIT 0x0001FFFFFFFFL - -/* Ranges of PCI bus space that can be accessed via PIO from xtalk */ -#define BRIDGE_MIN_PIO_ADDR_MEM 0x00000000 /* 1G PCI memory space */ -#define BRIDGE_MAX_PIO_ADDR_MEM 0x3fffffff -#define BRIDGE_MIN_PIO_ADDR_IO 0x00000000 /* 4G PCI IO space */ -#define BRIDGE_MAX_PIO_ADDR_IO 0xffffffff - -/* XTALK addresses that map into PCI addresses */ -#define BRIDGE_PCI_MEM32_BASE BRIDGE_PIO32_XTALK_ALIAS_BASE -#define BRIDGE_PCI_MEM32_LIMIT BRIDGE_PIO32_XTALK_ALIAS_LIMIT -#define BRIDGE_PCI_MEM64_BASE BRIDGE_PIO64_XTALK_ALIAS_BASE -#define BRIDGE_PCI_MEM64_LIMIT BRIDGE_PIO64_XTALK_ALIAS_LIMIT -#define BRIDGE_PCI_IO_BASE BRIDGE_PCIIO_XTALK_ALIAS_BASE -#define BRIDGE_PCI_IO_LIMIT BRIDGE_PCIIO_XTALK_ALIAS_LIMIT - -/* - * Macros for Bridge bus (PCI/GIO) to Xtalk DMA - */ -/* Bridge Bus DMA addresses */ -#define BRIDGE_LOCAL_BASE 0 -#define BRIDGE_DMA_MAPPED_BASE 0x40000000 -#define BRIDGE_DMA_MAPPED_SIZE 0x40000000 /* 1G Bytes */ -#define BRIDGE_DMA_DIRECT_BASE 0x80000000 -#define BRIDGE_DMA_DIRECT_SIZE 0x80000000 /* 2G Bytes */ - -#define PCI32_LOCAL_BASE BRIDGE_LOCAL_BASE - -/* PCI addresses of regions decoded by Bridge for DMA */ -#define PCI32_MAPPED_BASE BRIDGE_DMA_MAPPED_BASE -#define PCI32_DIRECT_BASE BRIDGE_DMA_DIRECT_BASE - -#define IS_PCI32_LOCAL(x) ((ulong_t)(x) < PCI32_MAPPED_BASE) -#define IS_PCI32_MAPPED(x) ((ulong_t)(x) < PCI32_DIRECT_BASE && \ - (ulong_t)(x) >= PCI32_MAPPED_BASE) -#define IS_PCI32_DIRECT(x) ((ulong_t)(x) >= PCI32_MAPPED_BASE) -#define IS_PCI64(x) ((ulong_t)(x) >= PCI64_BASE) - -/* - * The GIO address space. - */ -/* Xtalk to GIO PIO */ -#define BRIDGE_GIO_MEM32_BASE BRIDGE_PIO32_XTALK_ALIAS_BASE -#define BRIDGE_GIO_MEM32_LIMIT BRIDGE_PIO32_XTALK_ALIAS_LIMIT - -#define GIO_LOCAL_BASE BRIDGE_LOCAL_BASE - -/* GIO addresses of regions decoded by Bridge for DMA */ -#define GIO_MAPPED_BASE BRIDGE_DMA_MAPPED_BASE -#define GIO_DIRECT_BASE BRIDGE_DMA_DIRECT_BASE - -#define IS_GIO_LOCAL(x) ((ulong_t)(x) < GIO_MAPPED_BASE) -#define IS_GIO_MAPPED(x) ((ulong_t)(x) < GIO_DIRECT_BASE && \ - (ulong_t)(x) >= GIO_MAPPED_BASE) -#define IS_GIO_DIRECT(x) ((ulong_t)(x) >= GIO_MAPPED_BASE) - -/* PCI to xtalk mapping */ - -/* given a DIR_OFF value and a pci/gio 32 bits direct address, determine - * which xtalk address is accessed - */ -#define BRIDGE_DIRECT_32_SEG_SIZE BRIDGE_DMA_DIRECT_SIZE -#define BRIDGE_DIRECT_32_TO_XTALK(dir_off,adr) \ - ((dir_off) * BRIDGE_DIRECT_32_SEG_SIZE + \ - ((adr) & (BRIDGE_DIRECT_32_SEG_SIZE - 1)) + PHYS_RAMBASE) - -/* 64-bit address attribute masks */ -#define PCI64_ATTR_TARG_MASK 0xf000000000000000 -#define PCI64_ATTR_TARG_SHFT 60 -#define PCI64_ATTR_PREF 0x0800000000000000 -#define PCI64_ATTR_PREC 0x0400000000000000 -#define PCI64_ATTR_VIRTUAL 0x0200000000000000 -#define PCI64_ATTR_BAR 0x0100000000000000 -#define PCI64_ATTR_RMF_MASK 0x00ff000000000000 -#define PCI64_ATTR_RMF_SHFT 48 - -#ifndef __ASSEMBLY__ -/* Address translation entry for mapped pci32 accesses */ -typedef union ate_u { - u64 ent; - struct ate_s { - u64 rmf:16; - u64 addr:36; - u64 targ:4; - u64 reserved:3; - u64 barrier:1; - u64 prefetch:1; - u64 precise:1; - u64 coherent:1; - u64 valid:1; - } field; -} ate_t; -#endif /* !__ASSEMBLY__ */ - -#define ATE_V 0x01 -#define ATE_CO 0x02 -#define ATE_PREC 0x04 -#define ATE_PREF 0x08 -#define ATE_BAR 0x10 - -#define ATE_PFNSHIFT 12 -#define ATE_TIDSHIFT 8 -#define ATE_RMFSHIFT 48 - -#define mkate(xaddr, xid, attr) ((xaddr) & 0x0000fffffffff000ULL) | \ - ((xid)<sysdata)) - -extern void register_bridge_irq(unsigned int irq); -extern int request_bridge_irq(struct bridge_controller *bc); - -extern struct pci_ops bridge_pci_ops; - -#endif /* _ASM_PCI_BRIDGE_H */ diff --git a/include/asm-mips/percpu.h b/include/asm-mips/percpu.h deleted file mode 100644 index 844e763e9332..000000000000 --- a/include/asm-mips/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_PERCPU_H -#define __ASM_PERCPU_H - -#include - -#endif /* __ASM_PERCPU_H */ diff --git a/include/asm-mips/pgalloc.h b/include/asm-mips/pgalloc.h deleted file mode 100644 index 1275831dda29..000000000000 --- a/include/asm-mips/pgalloc.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 - 2001, 2003 by Ralf Baechle - * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. - */ -#ifndef _ASM_PGALLOC_H -#define _ASM_PGALLOC_H - -#include -#include -#include - -static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, - pte_t *pte) -{ - set_pmd(pmd, __pmd((unsigned long)pte)); -} - -static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, - pgtable_t pte) -{ - set_pmd(pmd, __pmd((unsigned long)page_address(pte))); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -/* - * Initialize a new pmd table with invalid pointers. - */ -extern void pmd_init(unsigned long page, unsigned long pagetable); - -#ifdef CONFIG_64BIT - -static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) -{ - set_pud(pud, __pud((unsigned long)pmd)); -} -#endif - -/* - * Initialize a new pgd / pmd table with invalid pointers. - */ -extern void pgd_init(unsigned long page); - -static inline pgd_t *pgd_alloc(struct mm_struct *mm) -{ - pgd_t *ret, *init; - - ret = (pgd_t *) __get_free_pages(GFP_KERNEL, PGD_ORDER); - if (ret) { - init = pgd_offset(&init_mm, 0UL); - pgd_init((unsigned long)ret); - memcpy(ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD, - (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); - } - - return ret; -} - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - free_pages((unsigned long)pgd, PGD_ORDER); -} - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - pte_t *pte; - - pte = (pte_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, PTE_ORDER); - - return pte; -} - -static inline struct page *pte_alloc_one(struct mm_struct *mm, - unsigned long address) -{ - struct page *pte; - - pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER); - if (pte) { - clear_highpage(pte); - pgtable_page_ctor(pte); - } - return pte; -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - free_pages((unsigned long)pte, PTE_ORDER); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - __free_pages(pte, PTE_ORDER); -} - -#define __pte_free_tlb(tlb,pte) \ -do { \ - pgtable_page_dtor(pte); \ - tlb_remove_page((tlb), pte); \ -} while (0) - -#ifdef CONFIG_32BIT - -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - */ -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x) do { } while (0) - -#endif - -#ifdef CONFIG_64BIT - -static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) -{ - pmd_t *pmd; - - pmd = (pmd_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT, PMD_ORDER); - if (pmd) - pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table); - return pmd; -} - -static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) -{ - free_pages((unsigned long)pmd, PMD_ORDER); -} - -#define __pmd_free_tlb(tlb, x) pmd_free((tlb)->mm, x) - -#endif - -#define check_pgt_cache() do { } while (0) - -extern void pagetable_init(void); - -#endif /* _ASM_PGALLOC_H */ diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h deleted file mode 100644 index 55813d6150c7..000000000000 --- a/include/asm-mips/pgtable-32.h +++ /dev/null @@ -1,234 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle - * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. - */ -#ifndef _ASM_PGTABLE_32_H -#define _ASM_PGTABLE_32_H - -#include -#include - -#include -#include -#include - -#include - -/* - * - add_wired_entry() add a fixed TLB entry, and move wired register - */ -extern void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, - unsigned long entryhi, unsigned long pagemask); - -/* - * - add_temporary_entry() add a temporary TLB entry. We use TLB entries - * starting at the top and working down. This is for populating the - * TLB before trap_init() puts the TLB miss handler in place. It - * should be used only for entries matching the actual page tables, - * to prevent inconsistencies. - */ -extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, - unsigned long entryhi, unsigned long pagemask); - - -/* Basically we have the same two-level (which is the logical three level - * Linux page table layout folded) page tables as the i386. Some day - * when we have proper page coloring support we can have a 1% quicker - * tlb refill handling mechanism, but for now it is a bit slower but - * works even with the cache aliasing problem the R4k and above have. - */ - -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define PGDIR_SHIFT (2 * PAGE_SHIFT + PTE_ORDER - PTE_T_LOG2) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * Entries per page directory level: we use two-level, so - * we don't really have any PUD/PMD directory physically. - */ -#define __PGD_ORDER (32 - 3 * PAGE_SHIFT + PGD_T_LOG2 + PTE_T_LOG2) -#define PGD_ORDER (__PGD_ORDER >= 0 ? __PGD_ORDER : 0) -#define PUD_ORDER aieeee_attempt_to_allocate_pud -#define PMD_ORDER 1 -#define PTE_ORDER 0 - -#define PTRS_PER_PGD (USER_PTRS_PER_PGD * 2) -#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t)) - -#define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#define VMALLOC_START MAP_BASE - -#define PKMAP_BASE (0xfe000000UL) - -#ifdef CONFIG_HIGHMEM -# define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE) -#else -# define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) -#endif - -#ifdef CONFIG_64BIT_PHYS_ADDR -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e)) -#else -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#endif -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -extern void load_pgd(unsigned long pg_dir); - -extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)]; - -/* - * Empty pgd/pmd entries point to the invalid_pte_table. - */ -static inline int pmd_none(pmd_t pmd) -{ - return pmd_val(pmd) == (unsigned long) invalid_pte_table; -} - -#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK) - -static inline int pmd_present(pmd_t pmd) -{ - return pmd_val(pmd) != (unsigned long) invalid_pte_table; -} - -static inline void pmd_clear(pmd_t *pmdp) -{ - pmd_val(*pmdp) = ((unsigned long) invalid_pte_table); -} - -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) -#define pte_page(x) pfn_to_page(pte_pfn(x)) -#define pte_pfn(x) ((unsigned long)((x).pte_high >> 6)) -static inline pte_t -pfn_pte(unsigned long pfn, pgprot_t prot) -{ - pte_t pte; - pte.pte_high = (pfn << 6) | (pgprot_val(prot) & 0x3f); - pte.pte_low = pgprot_val(prot); - return pte; -} - -#else - -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -#ifdef CONFIG_CPU_VR41XX -#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2))) -#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot)) -#else -#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT)) -#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#endif -#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */ - -#define __pgd_offset(address) pgd_index(address) -#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) -#define __pmd_offset(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) - -/* to find an entry in a page-table-directory */ -#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr)) - -/* Find an entry in the third-level page table.. */ -#define __pte_offset(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset(dir, address) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) -#define pte_offset_kernel(dir, address) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) - -#define pte_offset_map(dir, address) \ - ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) -#define pte_offset_map_nested(dir, address) \ - ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) -#define pte_unmap(pte) ((void)(pte)) -#define pte_unmap_nested(pte) ((void)(pte)) - -#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) - -/* Swap entries must have VALID bit cleared. */ -#define __swp_type(x) (((x).val >> 10) & 0x1f) -#define __swp_offset(x) ((x).val >> 15) -#define __swp_entry(type,offset) \ - ((swp_entry_t) { ((type) << 10) | ((offset) << 15) }) - -/* - * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range: - */ -#define PTE_FILE_MAX_BITS 28 - -#define pte_to_pgoff(_pte) ((((_pte).pte >> 1 ) & 0x07) | \ - (((_pte).pte >> 2 ) & 0x38) | \ - (((_pte).pte >> 10) << 6 )) - -#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x07) << 1 ) | \ - (((off) & 0x38) << 2 ) | \ - (((off) >> 6 ) << 10) | \ - _PAGE_FILE }) - -#else - -/* Swap entries must have VALID and GLOBAL bits cleared. */ -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) -#define __swp_type(x) (((x).val >> 2) & 0x1f) -#define __swp_offset(x) ((x).val >> 7) -#define __swp_entry(type,offset) \ - ((swp_entry_t) { ((type) << 2) | ((offset) << 7) }) -#else -#define __swp_type(x) (((x).val >> 8) & 0x1f) -#define __swp_offset(x) ((x).val >> 13) -#define __swp_entry(type,offset) \ - ((swp_entry_t) { ((type) << 8) | ((offset) << 13) }) -#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */ - -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) -/* - * Bits 0 and 1 of pte_high are taken, use the rest for the page offset... - */ -#define PTE_FILE_MAX_BITS 30 - -#define pte_to_pgoff(_pte) ((_pte).pte_high >> 2) -#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) << 2 }) - -#else -/* - * Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range: - */ -#define PTE_FILE_MAX_BITS 28 - -#define pte_to_pgoff(_pte) ((((_pte).pte >> 1) & 0x7) | \ - (((_pte).pte >> 2) & 0x8) | \ - (((_pte).pte >> 8) << 4)) - -#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7) << 1) | \ - (((off) & 0x8) << 2) | \ - (((off) >> 4) << 8) | \ - _PAGE_FILE }) -#endif - -#endif - -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high }) -#define __swp_entry_to_pte(x) ((pte_t) { 0, (x).val }) -#else -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) -#endif - -#endif /* _ASM_PGTABLE_32_H */ diff --git a/include/asm-mips/pgtable-64.h b/include/asm-mips/pgtable-64.h deleted file mode 100644 index 943515f0ef87..000000000000 --- a/include/asm-mips/pgtable-64.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle - * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. - */ -#ifndef _ASM_PGTABLE_64_H -#define _ASM_PGTABLE_64_H - -#include - -#include -#include -#include -#include - -#include - -/* - * Each address space has 2 4K pages as its page directory, giving 1024 - * (== PTRS_PER_PGD) 8 byte pointers to pmd tables. Each pmd table is a - * single 4K page, giving 512 (== PTRS_PER_PMD) 8 byte pointers to page - * tables. Each page table is also a single 4K page, giving 512 (== - * PTRS_PER_PTE) 8 byte ptes. Each pud entry is initialized to point to - * invalid_pmd_table, each pmd entry is initialized to point to - * invalid_pte_table, each pte is initialized to 0. When memory is low, - * and a pmd table or a page table allocation fails, empty_bad_pmd_table - * and empty_bad_page_table is returned back to higher layer code, so - * that the failure is recognized later on. Linux does not seem to - * handle these failures very well though. The empty_bad_page_table has - * invalid pte entries in it, to force page faults. - * - * Kernel mappings: kernel mappings are held in the swapper_pg_table. - * The layout is identical to userspace except it's indexed with the - * fault address - VMALLOC_START. - */ - -/* PMD_SHIFT determines the size of the area a second-level page table can map */ -#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT + PTE_ORDER - 3)) -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define PGDIR_SHIFT (PMD_SHIFT + (PAGE_SHIFT + PMD_ORDER - 3)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * For 4kB page size we use a 3 level page tree and an 8kB pud, which - * permits us mapping 40 bits of virtual address space. - * - * We used to implement 41 bits by having an order 1 pmd level but that seemed - * rather pointless. - * - * For 8kB page size we use a 3 level page tree which permits a total of - * 8TB of address space. Alternatively a 33-bit / 8GB organization using - * two levels would be easy to implement. - * - * For 16kB page size we use a 2 level page tree which permits a total of - * 36 bits of virtual address space. We could add a third level but it seems - * like at the moment there's no need for this. - * - * For 64kB page size we use a 2 level page table tree for a total of 42 bits - * of virtual address space. - */ -#ifdef CONFIG_PAGE_SIZE_4KB -#define PGD_ORDER 1 -#define PUD_ORDER aieeee_attempt_to_allocate_pud -#define PMD_ORDER 0 -#define PTE_ORDER 0 -#endif -#ifdef CONFIG_PAGE_SIZE_8KB -#define PGD_ORDER 0 -#define PUD_ORDER aieeee_attempt_to_allocate_pud -#define PMD_ORDER 0 -#define PTE_ORDER 0 -#endif -#ifdef CONFIG_PAGE_SIZE_16KB -#define PGD_ORDER 0 -#define PUD_ORDER aieeee_attempt_to_allocate_pud -#define PMD_ORDER 0 -#define PTE_ORDER 0 -#endif -#ifdef CONFIG_PAGE_SIZE_64KB -#define PGD_ORDER 0 -#define PUD_ORDER aieeee_attempt_to_allocate_pud -#define PMD_ORDER 0 -#define PTE_ORDER 0 -#endif - -#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t)) -#define PTRS_PER_PMD ((PAGE_SIZE << PMD_ORDER) / sizeof(pmd_t)) -#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t)) - -#if PGDIR_SIZE >= TASK_SIZE -#define USER_PTRS_PER_PGD (1) -#else -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) -#endif -#define FIRST_USER_ADDRESS 0UL - -#define VMALLOC_START MAP_BASE -#define VMALLOC_END \ - (VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE) -#if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \ - VMALLOC_START != CKSSEG -/* Load modules into 32bit-compatible segment. */ -#define MODULE_START CKSSEG -#define MODULE_END (FIXADDR_START-2*PAGE_SIZE) -extern pgd_t module_pg_dir[PTRS_PER_PGD]; -#endif - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e)) - -extern pte_t invalid_pte_table[PTRS_PER_PTE]; -extern pte_t empty_bad_page_table[PTRS_PER_PTE]; -extern pmd_t invalid_pmd_table[PTRS_PER_PMD]; -extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD]; - -/* - * Empty pgd/pmd entries point to the invalid_pte_table. - */ -static inline int pmd_none(pmd_t pmd) -{ - return pmd_val(pmd) == (unsigned long) invalid_pte_table; -} - -#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK) - -static inline int pmd_present(pmd_t pmd) -{ - return pmd_val(pmd) != (unsigned long) invalid_pte_table; -} - -static inline void pmd_clear(pmd_t *pmdp) -{ - pmd_val(*pmdp) = ((unsigned long) invalid_pte_table); -} - -/* - * Empty pud entries point to the invalid_pmd_table. - */ -static inline int pud_none(pud_t pud) -{ - return pud_val(pud) == (unsigned long) invalid_pmd_table; -} - -static inline int pud_bad(pud_t pud) -{ - return pud_val(pud) & ~PAGE_MASK; -} - -static inline int pud_present(pud_t pud) -{ - return pud_val(pud) != (unsigned long) invalid_pmd_table; -} - -static inline void pud_clear(pud_t *pudp) -{ - pud_val(*pudp) = ((unsigned long) invalid_pmd_table); -} - -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -#ifdef CONFIG_CPU_VR41XX -#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2))) -#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot)) -#else -#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT)) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#endif - -#define __pgd_offset(address) pgd_index(address) -#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) -#define __pmd_offset(address) pmd_index(address) - -/* to find an entry in a kernel page-table-directory */ -#ifdef MODULE_START -#define pgd_offset_k(address) \ - ((address) >= MODULE_START ? module_pg_dir : pgd_offset(&init_mm, 0UL)) -#else -#define pgd_offset_k(address) pgd_offset(&init_mm, 0UL) -#endif - -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) -#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) - -/* to find an entry in a page-table-directory */ -#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr)) - -static inline unsigned long pud_page_vaddr(pud_t pud) -{ - return pud_val(pud); -} -#define pud_phys(pud) virt_to_phys((void *)pud_val(pud)) -#define pud_page(pud) (pfn_to_page(pud_phys(pud) >> PAGE_SHIFT)) - -/* Find an entry in the second-level page table.. */ -static inline pmd_t *pmd_offset(pud_t * pud, unsigned long address) -{ - return (pmd_t *) pud_page_vaddr(*pud) + pmd_index(address); -} - -/* Find an entry in the third-level page table.. */ -#define __pte_offset(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset(dir, address) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) -#define pte_offset_kernel(dir, address) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) -#define pte_offset_map(dir, address) \ - ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) -#define pte_offset_map_nested(dir, address) \ - ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) -#define pte_unmap(pte) ((void)(pte)) -#define pte_unmap_nested(pte) ((void)(pte)) - -/* - * Initialize a new pgd / pmd table with invalid pointers. - */ -extern void pgd_init(unsigned long page); -extern void pmd_init(unsigned long page, unsigned long pagetable); - -/* - * Non-present pages: high 24 bits are offset, next 8 bits type, - * low 32 bits zero. - */ -static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset) -{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; } - -#define __swp_type(x) (((x).val >> 32) & 0xff) -#define __swp_offset(x) ((x).val >> 40) -#define __swp_entry(type, offset) ((swp_entry_t) { pte_val(mk_swap_pte((type), (offset))) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -/* - * Bits 0, 4, 6, and 7 are taken. Let's leave bits 1, 2, 3, and 5 alone to - * make things easier, and only use the upper 56 bits for the page offset... - */ -#define PTE_FILE_MAX_BITS 56 - -#define pte_to_pgoff(_pte) ((_pte).pte >> 8) -#define pgoff_to_pte(off) ((pte_t) { ((off) << 8) | _PAGE_FILE }) - -#endif /* _ASM_PGTABLE_64_H */ diff --git a/include/asm-mips/pgtable-bits.h b/include/asm-mips/pgtable-bits.h deleted file mode 100644 index 51b34a48c84a..000000000000 --- a/include/asm-mips/pgtable-bits.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 - 2002 by Ralf Baechle - * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. - * Copyright (C) 2002 Maciej W. Rozycki - */ -#ifndef _ASM_PGTABLE_BITS_H -#define _ASM_PGTABLE_BITS_H - - -/* - * Note that we shift the lower 32bits of each EntryLo[01] entry - * 6 bits to the left. That way we can convert the PFN into the - * physical address by a single 'and' operation and gain 6 additional - * bits for storing information which isn't present in a normal - * MIPS page table. - * - * Similar to the Alpha port, we need to keep track of the ref - * and mod bits in software. We have a software "yeah you can read - * from this page" bit, and a hardware one which actually lets the - * process read from the page. On the same token we have a software - * writable bit and the real hardware one which actually lets the - * process write to the page, this keeps a mod bit via the hardware - * dirty bit. - * - * Certain revisions of the R4000 and R5000 have a bug where if a - * certain sequence occurs in the last 3 instructions of an executable - * page, and the following page is not mapped, the cpu can do - * unpredictable things. The code (when it is written) to deal with - * this problem will be in the update_mmu_cache() code for the r4k. - */ -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) - -#define _PAGE_PRESENT (1<<6) /* implemented in software */ -#define _PAGE_READ (1<<7) /* implemented in software */ -#define _PAGE_WRITE (1<<8) /* implemented in software */ -#define _PAGE_ACCESSED (1<<9) /* implemented in software */ -#define _PAGE_MODIFIED (1<<10) /* implemented in software */ -#define _PAGE_FILE (1<<10) /* set:pagecache unset:swap */ - -#define _PAGE_R4KBUG (1<<0) /* workaround for r4k bug */ -#define _PAGE_GLOBAL (1<<0) -#define _PAGE_VALID (1<<1) -#define _PAGE_SILENT_READ (1<<1) /* synonym */ -#define _PAGE_DIRTY (1<<2) /* The MIPS dirty bit */ -#define _PAGE_SILENT_WRITE (1<<2) -#define _CACHE_SHIFT 3 -#define _CACHE_MASK (7<<3) - -#else - -#define _PAGE_PRESENT (1<<0) /* implemented in software */ -#define _PAGE_READ (1<<1) /* implemented in software */ -#define _PAGE_WRITE (1<<2) /* implemented in software */ -#define _PAGE_ACCESSED (1<<3) /* implemented in software */ -#define _PAGE_MODIFIED (1<<4) /* implemented in software */ -#define _PAGE_FILE (1<<4) /* set:pagecache unset:swap */ - -#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) - -#define _PAGE_GLOBAL (1<<8) -#define _PAGE_VALID (1<<9) -#define _PAGE_SILENT_READ (1<<9) /* synonym */ -#define _PAGE_DIRTY (1<<10) /* The MIPS dirty bit */ -#define _PAGE_SILENT_WRITE (1<<10) -#define _CACHE_UNCACHED (1<<11) -#define _CACHE_MASK (1<<11) - -#else - -#define _PAGE_R4KBUG (1<<5) /* workaround for r4k bug */ -#define _PAGE_GLOBAL (1<<6) -#define _PAGE_VALID (1<<7) -#define _PAGE_SILENT_READ (1<<7) /* synonym */ -#define _PAGE_DIRTY (1<<8) /* The MIPS dirty bit */ -#define _PAGE_SILENT_WRITE (1<<8) -#define _CACHE_SHIFT 9 -#define _CACHE_MASK (7<<9) - -#endif -#endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */ - - -/* - * Cache attributes - */ -#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) - -#define _CACHE_CACHABLE_NONCOHERENT 0 - -#elif defined(CONFIG_CPU_SB1) - -/* No penalty for being coherent on the SB1, so just - use it for "noncoherent" spaces, too. Shouldn't hurt. */ - -#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) -#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) -#define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT) -#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) - -#elif defined(CONFIG_CPU_RM9000) - -#define _CACHE_WT (0<<_CACHE_SHIFT) -#define _CACHE_WTWA (1<<_CACHE_SHIFT) -#define _CACHE_UC_B (2<<_CACHE_SHIFT) -#define _CACHE_WB (3<<_CACHE_SHIFT) -#define _CACHE_CWBEA (4<<_CACHE_SHIFT) -#define _CACHE_CWB (5<<_CACHE_SHIFT) -#define _CACHE_UCNB (6<<_CACHE_SHIFT) -#define _CACHE_FPC (7<<_CACHE_SHIFT) - -#define _CACHE_UNCACHED _CACHE_UC_B -#define _CACHE_CACHABLE_NONCOHERENT _CACHE_WB - -#else - -#define _CACHE_CACHABLE_NO_WA (0<<_CACHE_SHIFT) /* R4600 only */ -#define _CACHE_CACHABLE_WA (1<<_CACHE_SHIFT) /* R4600 only */ -#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) /* R4[0246]00 */ -#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT) /* R4[0246]00 */ -#define _CACHE_CACHABLE_CE (4<<_CACHE_SHIFT) /* R4[04]00MC only */ -#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) /* R4[04]00MC only */ -#define _CACHE_CACHABLE_COHERENT (5<<_CACHE_SHIFT) /* MIPS32R2 CMP */ -#define _CACHE_CACHABLE_CUW (6<<_CACHE_SHIFT) /* R4[04]00MC only */ -#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) /* R10000 only */ - -#endif - -#define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED) -#define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED) - -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK) - -#endif /* _ASM_PGTABLE_BITS_H */ diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h deleted file mode 100644 index 6a0edf72ffbc..000000000000 --- a/include/asm-mips/pgtable.h +++ /dev/null @@ -1,383 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Ralf Baechle - */ -#ifndef _ASM_PGTABLE_H -#define _ASM_PGTABLE_H - -#ifdef CONFIG_32BIT -#include -#endif -#ifdef CONFIG_64BIT -#include -#endif - -#include -#include - -struct mm_struct; -struct vm_area_struct; - -#define PAGE_NONE __pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT) -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ - _page_cachable_default) -#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_READ | \ - _page_cachable_default) -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_READ | \ - _page_cachable_default) -#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \ - _PAGE_GLOBAL | _page_cachable_default) -#define PAGE_USERIO __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ - _page_cachable_default) -#define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \ - __WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED) - -/* - * MIPS can't do page protection for execute, and considers that the same like - * read. Also, write permissions imply read permissions. This is the closest - * we can get by reasonable means.. - */ - -/* - * Dummy values to fill the table in mmap.c - * The real values will be generated at runtime - */ -#define __P000 __pgprot(0) -#define __P001 __pgprot(0) -#define __P010 __pgprot(0) -#define __P011 __pgprot(0) -#define __P100 __pgprot(0) -#define __P101 __pgprot(0) -#define __P110 __pgprot(0) -#define __P111 __pgprot(0) - -#define __S000 __pgprot(0) -#define __S001 __pgprot(0) -#define __S010 __pgprot(0) -#define __S011 __pgprot(0) -#define __S100 __pgprot(0) -#define __S101 __pgprot(0) -#define __S110 __pgprot(0) -#define __S111 __pgprot(0) - -extern unsigned long _page_cachable_default; - -/* - * ZERO_PAGE is a global shared page that is always zero; used - * for zero-mapped memory areas etc.. - */ - -extern unsigned long empty_zero_page; -extern unsigned long zero_page_mask; - -#define ZERO_PAGE(vaddr) \ - (virt_to_page((void *)(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask)))) - -extern void paging_init(void); - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ -#define pmd_phys(pmd) virt_to_phys((void *)pmd_val(pmd)) -#define pmd_page(pmd) (pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT)) -#define pmd_page_vaddr(pmd) pmd_val(pmd) - -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) - -#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL)) -#define pte_present(pte) ((pte).pte_low & _PAGE_PRESENT) - -static inline void set_pte(pte_t *ptep, pte_t pte) -{ - ptep->pte_high = pte.pte_high; - smp_wmb(); - ptep->pte_low = pte.pte_low; - //printk("pte_high %x pte_low %x\n", ptep->pte_high, ptep->pte_low); - - if (pte.pte_low & _PAGE_GLOBAL) { - pte_t *buddy = ptep_buddy(ptep); - /* - * Make sure the buddy is global too (if it's !none, - * it better already be global) - */ - if (pte_none(*buddy)) { - buddy->pte_low |= _PAGE_GLOBAL; - buddy->pte_high |= _PAGE_GLOBAL; - } - } -} -#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) - -static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_t null = __pte(0); - - /* Preserve global status for the pair */ - if (ptep_buddy(ptep)->pte_low & _PAGE_GLOBAL) - null.pte_low = null.pte_high = _PAGE_GLOBAL; - - set_pte_at(mm, addr, ptep, null); -} -#else - -#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL)) -#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) - -/* - * Certain architectures need to do special things when pte's - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -static inline void set_pte(pte_t *ptep, pte_t pteval) -{ - *ptep = pteval; -#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX) - if (pte_val(pteval) & _PAGE_GLOBAL) { - pte_t *buddy = ptep_buddy(ptep); - /* - * Make sure the buddy is global too (if it's !none, - * it better already be global) - */ - if (pte_none(*buddy)) - pte_val(*buddy) = pte_val(*buddy) | _PAGE_GLOBAL; - } -#endif -} -#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) - -static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ -#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX) - /* Preserve global status for the pair */ - if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL) - set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL)); - else -#endif - set_pte_at(mm, addr, ptep, __pte(0)); -} -#endif - -/* - * (pmds are folded into puds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0) - -#ifdef CONFIG_64BIT -/* - * (puds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0) -#endif - -#define PGD_T_LOG2 (__builtin_ffs(sizeof(pgd_t)) - 1) -#define PMD_T_LOG2 (__builtin_ffs(sizeof(pmd_t)) - 1) -#define PTE_T_LOG2 (__builtin_ffs(sizeof(pte_t)) - 1) - -/* - * We used to declare this array with size but gcc 3.3 and older are not able - * to find that this expression is a constant, so the size is dropped. - */ -extern pgd_t swapper_pg_dir[]; - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) -static inline int pte_write(pte_t pte) { return pte.pte_low & _PAGE_WRITE; } -static inline int pte_dirty(pte_t pte) { return pte.pte_low & _PAGE_MODIFIED; } -static inline int pte_young(pte_t pte) { return pte.pte_low & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte.pte_low & _PAGE_FILE; } - -static inline pte_t pte_wrprotect(pte_t pte) -{ - pte.pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE); - pte.pte_high &= ~_PAGE_SILENT_WRITE; - return pte; -} - -static inline pte_t pte_mkclean(pte_t pte) -{ - pte.pte_low &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE); - pte.pte_high &= ~_PAGE_SILENT_WRITE; - return pte; -} - -static inline pte_t pte_mkold(pte_t pte) -{ - pte.pte_low &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ); - pte.pte_high &= ~_PAGE_SILENT_READ; - return pte; -} - -static inline pte_t pte_mkwrite(pte_t pte) -{ - pte.pte_low |= _PAGE_WRITE; - if (pte.pte_low & _PAGE_MODIFIED) { - pte.pte_low |= _PAGE_SILENT_WRITE; - pte.pte_high |= _PAGE_SILENT_WRITE; - } - return pte; -} - -static inline pte_t pte_mkdirty(pte_t pte) -{ - pte.pte_low |= _PAGE_MODIFIED; - if (pte.pte_low & _PAGE_WRITE) { - pte.pte_low |= _PAGE_SILENT_WRITE; - pte.pte_high |= _PAGE_SILENT_WRITE; - } - return pte; -} - -static inline pte_t pte_mkyoung(pte_t pte) -{ - pte.pte_low |= _PAGE_ACCESSED; - if (pte.pte_low & _PAGE_READ) { - pte.pte_low |= _PAGE_SILENT_READ; - pte.pte_high |= _PAGE_SILENT_READ; - } - return pte; -} -#else -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_MODIFIED; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } - -static inline pte_t pte_wrprotect(pte_t pte) -{ - pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE); - return pte; -} - -static inline pte_t pte_mkclean(pte_t pte) -{ - pte_val(pte) &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE); - return pte; -} - -static inline pte_t pte_mkold(pte_t pte) -{ - pte_val(pte) &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ); - return pte; -} - -static inline pte_t pte_mkwrite(pte_t pte) -{ - pte_val(pte) |= _PAGE_WRITE; - if (pte_val(pte) & _PAGE_MODIFIED) - pte_val(pte) |= _PAGE_SILENT_WRITE; - return pte; -} - -static inline pte_t pte_mkdirty(pte_t pte) -{ - pte_val(pte) |= _PAGE_MODIFIED; - if (pte_val(pte) & _PAGE_WRITE) - pte_val(pte) |= _PAGE_SILENT_WRITE; - return pte; -} - -static inline pte_t pte_mkyoung(pte_t pte) -{ - pte_val(pte) |= _PAGE_ACCESSED; - if (pte_val(pte) & _PAGE_READ) - pte_val(pte) |= _PAGE_SILENT_READ; - return pte; -} -#endif -static inline int pte_special(pte_t pte) { return 0; } -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -/* - * Macro to make mark a page protection value as "uncacheable". Note - * that "protection" is really a misnomer here as the protection value - * contains the memory attribute bits, dirty bits, and various other - * bits as well. - */ -#define pgprot_noncached pgprot_noncached - -static inline pgprot_t pgprot_noncached(pgprot_t _prot) -{ - unsigned long prot = pgprot_val(_prot); - - prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED; - - return __pgprot(prot); -} - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte.pte_low &= _PAGE_CHG_MASK; - pte.pte_high &= ~0x3f; - pte.pte_low |= pgprot_val(newprot); - pte.pte_high |= pgprot_val(newprot) & 0x3f; - return pte; -} -#else -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)); -} -#endif - - -extern void __update_tlb(struct vm_area_struct *vma, unsigned long address, - pte_t pte); -extern void __update_cache(struct vm_area_struct *vma, unsigned long address, - pte_t pte); - -static inline void update_mmu_cache(struct vm_area_struct *vma, - unsigned long address, pte_t pte) -{ - __update_tlb(vma, address, pte); - __update_cache(vma, address, pte); -} - -#define kern_addr_valid(addr) (1) - -#ifdef CONFIG_64BIT_PHYS_ADDR -extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot); - -static inline int io_remap_pfn_range(struct vm_area_struct *vma, - unsigned long vaddr, - unsigned long pfn, - unsigned long size, - pgprot_t prot) -{ - phys_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size); - return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot); -} -#else -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) -#endif - -#include - -/* - * We provide our own get_unmapped area to cope with the virtual aliasing - * constraints placed on us by the cache architecture. - */ -#define HAVE_ARCH_UNMAPPED_AREA - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -#endif /* _ASM_PGTABLE_H */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/gpio.h b/include/asm-mips/pmc-sierra/msp71xx/gpio.h deleted file mode 100644 index ebdbab973e41..000000000000 --- a/include/asm-mips/pmc-sierra/msp71xx/gpio.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * include/asm-mips/pmc-sierra/msp71xx/gpio.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * @author Patrick Glass - */ - -#ifndef __PMC_MSP71XX_GPIO_H -#define __PMC_MSP71XX_GPIO_H - -/* Max number of gpio's is 28 on chip plus 3 banks of I2C IO Expanders */ -#define ARCH_NR_GPIOS (28 + (3 * 8)) - -/* new generic GPIO API - see Documentation/gpio.txt */ -#include - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -/* Setup calls for the gpio and gpio extended */ -extern void msp71xx_init_gpio(void); -extern void msp71xx_init_gpio_extended(void); -extern int msp71xx_set_output_drive(unsigned gpio, int value); - -/* Custom output drive functionss */ -static inline int gpio_set_output_drive(unsigned gpio, int value) -{ - return msp71xx_set_output_drive(gpio, value); -} - -/* IRQ's are not supported for gpio lines */ -static inline int gpio_to_irq(unsigned gpio) -{ - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return -EINVAL; -} - -#endif /* __PMC_MSP71XX_GPIO_H */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_cic_int.h b/include/asm-mips/pmc-sierra/msp71xx/msp_cic_int.h deleted file mode 100644 index c84bcf9570b1..000000000000 --- a/include/asm-mips/pmc-sierra/msp71xx/msp_cic_int.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Defines for the MSP interrupt controller. - * - * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. - * Author: Carsten Langgaard, carstenl@mips.com - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - */ - -#ifndef _MSP_CIC_INT_H -#define _MSP_CIC_INT_H - -/* - * The PMC-Sierra CIC interrupts are all centrally managed by the - * CIC sub-system. - * We attempt to keep the interrupt numbers as consistent as possible - * across all of the MSP devices, but some differences will creep in ... - * The interrupts which are directly forwarded to the MIPS core interrupts - * are assigned interrupts in the range 0-7, interrupts cascaded through - * the CIC are assigned interrupts 8-39. The cascade occurs on C_IRQ4 - * (MSP_INT_CIC). Currently we don't really distinguish between VPE1 - * and VPE0 (or thread contexts for that matter). Will have to fix. - * The PER interrupts are assigned interrupts in the range 40-71. -*/ - - -/* - * IRQs directly forwarded to the CPU - */ -#define MSP_MIPS_INTBASE 0 -#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ -#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ -#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ -#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ -#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */ -#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */ -#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */ -#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */ - -/* - * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) - * These defines should be tied to the register definitions for the CIC - * interrupt routine. For now, just use hard-coded values. - */ -#define MSP_CIC_INTBASE (MSP_MIPS_INTBASE + 8) -#define MSP_INT_EXT0 (MSP_CIC_INTBASE + 0) - /* External interrupt 0 */ -#define MSP_INT_EXT1 (MSP_CIC_INTBASE + 1) - /* External interrupt 1 */ -#define MSP_INT_EXT2 (MSP_CIC_INTBASE + 2) - /* External interrupt 2 */ -#define MSP_INT_EXT3 (MSP_CIC_INTBASE + 3) - /* External interrupt 3 */ -#define MSP_INT_CPUIF (MSP_CIC_INTBASE + 4) - /* CPU interface interrupt */ -#define MSP_INT_EXT4 (MSP_CIC_INTBASE + 5) - /* External interrupt 4 */ -#define MSP_INT_CIC_USB (MSP_CIC_INTBASE + 6) - /* Cascaded IRQ for USB */ -#define MSP_INT_MBOX (MSP_CIC_INTBASE + 7) - /* Sec engine mailbox IRQ */ -#define MSP_INT_EXT5 (MSP_CIC_INTBASE + 8) - /* External interrupt 5 */ -#define MSP_INT_TDM (MSP_CIC_INTBASE + 9) - /* TDM interrupt */ -#define MSP_INT_CIC_MAC0 (MSP_CIC_INTBASE + 10) - /* Cascaded IRQ for MAC 0 */ -#define MSP_INT_CIC_MAC1 (MSP_CIC_INTBASE + 11) - /* Cascaded IRQ for MAC 1 */ -#define MSP_INT_CIC_SEC (MSP_CIC_INTBASE + 12) - /* Cascaded IRQ for sec engine */ -#define MSP_INT_PER (MSP_CIC_INTBASE + 13) - /* Peripheral interrupt */ -#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14) - /* SLP timer 0 */ -#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15) - /* SLP timer 1 */ -#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16) - /* SLP timer 2 */ -#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17) - /* VPE0 MIPS timer */ -#define MSP_INT_BLKCP (MSP_CIC_INTBASE + 18) - /* Block Copy */ -#define MSP_INT_UART0 (MSP_CIC_INTBASE + 19) - /* UART 0 */ -#define MSP_INT_PCI (MSP_CIC_INTBASE + 20) - /* PCI subsystem */ -#define MSP_INT_EXT6 (MSP_CIC_INTBASE + 21) - /* External interrupt 5 */ -#define MSP_INT_PCI_MSI (MSP_CIC_INTBASE + 22) - /* PCI Message Signal */ -#define MSP_INT_CIC_SAR (MSP_CIC_INTBASE + 23) - /* Cascaded ADSL2+ SAR IRQ */ -#define MSP_INT_DSL (MSP_CIC_INTBASE + 24) - /* ADSL2+ IRQ */ -#define MSP_INT_CIC_ERR (MSP_CIC_INTBASE + 25) - /* SLP error condition */ -#define MSP_INT_VPE1_TIMER (MSP_CIC_INTBASE + 26) - /* VPE1 MIPS timer */ -#define MSP_INT_VPE0_PC (MSP_CIC_INTBASE + 27) - /* VPE0 Performance counter */ -#define MSP_INT_VPE1_PC (MSP_CIC_INTBASE + 28) - /* VPE1 Performance counter */ -#define MSP_INT_EXT7 (MSP_CIC_INTBASE + 29) - /* External interrupt 5 */ -#define MSP_INT_VPE0_SW (MSP_CIC_INTBASE + 30) - /* VPE0 Software interrupt */ -#define MSP_INT_VPE1_SW (MSP_CIC_INTBASE + 31) - /* VPE0 Software interrupt */ - -/* - * IRQs cascaded on CIC PER interrupt (MSP_INT_PER) - */ -#define MSP_PER_INTBASE (MSP_CIC_INTBASE + 32) -/* Reserved 0-1 */ -#define MSP_INT_UART1 (MSP_PER_INTBASE + 2) - /* UART 1 */ -/* Reserved 3-5 */ -#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) - /* 2-wire */ -#define MSP_INT_TM0 (MSP_PER_INTBASE + 7) - /* Peripheral timer block out 0 */ -#define MSP_INT_TM1 (MSP_PER_INTBASE + 8) - /* Peripheral timer block out 1 */ -/* Reserved 9 */ -#define MSP_INT_SPRX (MSP_PER_INTBASE + 10) - /* SPI RX complete */ -#define MSP_INT_SPTX (MSP_PER_INTBASE + 11) - /* SPI TX complete */ -#define MSP_INT_GPIO (MSP_PER_INTBASE + 12) - /* GPIO */ -#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) - /* Peripheral error */ -/* Reserved 14-31 */ - -#endif /* !_MSP_CIC_INT_H */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_int.h b/include/asm-mips/pmc-sierra/msp71xx/msp_int.h deleted file mode 100644 index 1d9f05474820..000000000000 --- a/include/asm-mips/pmc-sierra/msp71xx/msp_int.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Defines for the MSP interrupt handlers. - * - * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved. - * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - */ - -#ifndef _MSP_INT_H -#define _MSP_INT_H - -/* - * The PMC-Sierra MSP product line has at least two different interrupt - * controllers, the SLP register based scheme and the CIC interrupt - * controller block mechanism. This file distinguishes between them - * so that devices see a uniform interface. - */ - -#if defined(CONFIG_IRQ_MSP_SLP) - #include "msp_slp_int.h" -#elif defined(CONFIG_IRQ_MSP_CIC) - #include "msp_cic_int.h" -#else - #error "What sort of interrupt controller does *your* MSP have?" -#endif - -#endif /* !_MSP_INT_H */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h b/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h deleted file mode 100644 index 415606903617..000000000000 --- a/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Copyright (c) 2000-2006 PMC-Sierra INC. - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA - * 02139, USA. - * - * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS - * SOFTWARE. - */ - -#ifndef _MSP_PCI_H_ -#define _MSP_PCI_H_ - -#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220)) - -/* - * It is convenient to program the OATRAN register so that - * Athena virtual address space and PCI address space are - * the same. This is not a requirement, just a convenience. - * - * The only hard restrictions on the value of OATRAN is that - * OATRAN must not be programmed to allow translated memory - * addresses to fall within the lowest 512MB of - * PCI address space. This region is hardcoded - * for use as Athena PCI Host Controller target - * access memory space to the Athena's SDRAM. - * - * Note that OATRAN applies only to memory accesses, not - * to I/O accesses. - * - * To program OATRAN to make Athena virtual address space - * and PCI address space have the same values, OATRAN - * is to be programmed to 0xB8000000. The top seven - * bits of the value mimic the seven bits clipped off - * by the PCI Host controller. - * - * With OATRAN at the said value, when the CPU does - * an access to its virtual address at, say 0xB900_5000, - * the address appearing on the PCI bus will be - * 0xB900_5000. - * - Michael Penner - */ -#define MSP_PCI_OATRAN 0xB8000000UL - -#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL) -#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000) -#define MSP_PCI_SPACE_END \ - (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1) -#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL) -#define MSP_PCI_IOSPACE_SIZE 0x1000 -#define MSP_PCI_IOSPACE_END \ - (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1) - -/* IRQ for PCI status interrupts */ -#define PCI_STAT_IRQ 20 - -#define QFLUSH_REG_1 0xB7F40000 - -typedef volatile unsigned int pcireg; -typedef void * volatile ppcireg; - -struct pci_block_copy -{ - pcireg unused1; /* +0x00 */ - pcireg unused2; /* +0x04 */ - ppcireg unused3; /* +0x08 */ - ppcireg unused4; /* +0x0C */ - pcireg unused5; /* +0x10 */ - pcireg unused6; /* +0x14 */ - pcireg unused7; /* +0x18 */ - ppcireg unused8; /* +0x1C */ - ppcireg unused9; /* +0x20 */ - pcireg unusedA; /* +0x24 */ - ppcireg unusedB; /* +0x28 */ - ppcireg unusedC; /* +0x2C */ -}; - -enum -{ - config_device_vendor, /* 0 */ - config_status_command, /* 1 */ - config_class_revision, /* 2 */ - config_BIST_header_latency_cache, /* 3 */ - config_BAR0, /* 4 */ - config_BAR1, /* 5 */ - config_BAR2, /* 6 */ - config_not_used7, /* 7 */ - config_not_used8, /* 8 */ - config_not_used9, /* 9 */ - config_CIS, /* 10 */ - config_subsystem, /* 11 */ - config_not_used12, /* 12 */ - config_capabilities, /* 13 */ - config_not_used14, /* 14 */ - config_lat_grant_irq, /* 15 */ - config_message_control,/* 16 */ - config_message_addr, /* 17 */ - config_message_data, /* 18 */ - config_VPD_addr, /* 19 */ - config_VPD_data, /* 20 */ - config_maxregs /* 21 - number of registers */ -}; - -struct msp_pci_regs -{ - pcireg hop_unused_00; /* +0x00 */ - pcireg hop_unused_04; /* +0x04 */ - pcireg hop_unused_08; /* +0x08 */ - pcireg hop_unused_0C; /* +0x0C */ - pcireg hop_unused_10; /* +0x10 */ - pcireg hop_unused_14; /* +0x14 */ - pcireg hop_unused_18; /* +0x18 */ - pcireg hop_unused_1C; /* +0x1C */ - pcireg hop_unused_20; /* +0x20 */ - pcireg hop_unused_24; /* +0x24 */ - pcireg hop_unused_28; /* +0x28 */ - pcireg hop_unused_2C; /* +0x2C */ - pcireg hop_unused_30; /* +0x30 */ - pcireg hop_unused_34; /* +0x34 */ - pcireg if_control; /* +0x38 */ - pcireg oatran; /* +0x3C */ - pcireg reset_ctl; /* +0x40 */ - pcireg config_addr; /* +0x44 */ - pcireg hop_unused_48; /* +0x48 */ - pcireg msg_signaled_int_status; /* +0x4C */ - pcireg msg_signaled_int_mask; /* +0x50 */ - pcireg if_status; /* +0x54 */ - pcireg if_mask; /* +0x58 */ - pcireg hop_unused_5C; /* +0x5C */ - pcireg hop_unused_60; /* +0x60 */ - pcireg hop_unused_64; /* +0x64 */ - pcireg hop_unused_68; /* +0x68 */ - pcireg hop_unused_6C; /* +0x6C */ - pcireg hop_unused_70; /* +0x70 */ - - struct pci_block_copy pci_bc[2] __attribute__((aligned(64))); - - pcireg error_hdr1; /* +0xE0 */ - pcireg error_hdr2; /* +0xE4 */ - - pcireg config[config_maxregs] __attribute__((aligned(256))); - -}; - -#define BPCI_CFGADDR_BUSNUM_SHF 16 -#define BPCI_CFGADDR_FUNCTNUM_SHF 8 -#define BPCI_CFGADDR_REGNUM_SHF 2 -#define BPCI_CFGADDR_ENABLE (1<<31) - -#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */ -#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */ -#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */ -#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */ -#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */ -#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */ -#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */ - -#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */ -#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */ -#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */ -#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */ -#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */ -#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */ -#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */ -#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */ -#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */ -#define BPCI_IFSTATUS_SER (1<<19) /* System error */ -#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */ -#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */ -#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */ -#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */ -#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */ -#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */ -#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */ -#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */ -#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */ - -#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */ -#define BPCI_RESETCTL_RT (1<<4) /* Release time */ -#define BPCI_RESETCTL_CT (1<<8) /* Config time */ -#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */ -#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */ -#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */ - -extern struct msp_pci_regs msp_pci_regs - __attribute__((section(".register"))); -extern unsigned long msp_pci_config_space - __attribute__((section(".register"))); - -#endif /* !_MSP_PCI_H_ */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_prom.h b/include/asm-mips/pmc-sierra/msp71xx/msp_prom.h deleted file mode 100644 index 14ca7dc382a8..000000000000 --- a/include/asm-mips/pmc-sierra/msp71xx/msp_prom.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * MIPS boards bootprom interface for the Linux kernel. - * - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * Author: Carsten Langgaard, carstenl@mips.com - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - */ - -#ifndef _ASM_MSP_PROM_H -#define _ASM_MSP_PROM_H - -#include - -#define DEVICEID "deviceid" -#define FEATURES "features" -#define PROM_ENV "prom_env" -#define PROM_ENV_FILE "/proc/"PROM_ENV -#define PROM_ENV_SIZE 256 - -#define CPU_DEVID_FAMILY 0x0000ff00 -#define CPU_DEVID_REVISION 0x000000ff - -#define FPGA_IS_POLO(revision) \ - (((revision >= 0xb0) && (revision < 0xd0))) -#define FPGA_IS_5000(revision) \ - ((revision >= 0x80) && (revision <= 0x90)) -#define FPGA_IS_ZEUS(revision) ((revision < 0x7f)) -#define FPGA_IS_DUET(revision) \ - (((revision >= 0xa0) && (revision < 0xb0))) -#define FPGA_IS_MSP4200(revision) ((revision >= 0xd0)) -#define FPGA_IS_MSP7100(revision) ((revision >= 0xd0)) - -#define MACHINE_TYPE_POLO "POLO" -#define MACHINE_TYPE_DUET "DUET" -#define MACHINE_TYPE_ZEUS "ZEUS" -#define MACHINE_TYPE_MSP2000REVB "MSP2000REVB" -#define MACHINE_TYPE_MSP5000 "MSP5000" -#define MACHINE_TYPE_MSP4200 "MSP4200" -#define MACHINE_TYPE_MSP7120 "MSP7120" -#define MACHINE_TYPE_MSP7130 "MSP7130" -#define MACHINE_TYPE_OTHER "OTHER" - -#define MACHINE_TYPE_POLO_FPGA "POLO-FPGA" -#define MACHINE_TYPE_DUET_FPGA "DUET-FPGA" -#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA" -#define MACHINE_TYPE_MSP2000REVB_FPGA "MSP2000REVB-FPGA" -#define MACHINE_TYPE_MSP5000_FPGA "MSP5000-FPGA" -#define MACHINE_TYPE_MSP4200_FPGA "MSP4200-FPGA" -#define MACHINE_TYPE_MSP7100_FPGA "MSP7100-FPGA" -#define MACHINE_TYPE_OTHER_FPGA "OTHER-FPGA" - -/* Device Family definitions */ -#define FAMILY_FPGA 0x0000 -#define FAMILY_ZEUS 0x1000 -#define FAMILY_POLO 0x2000 -#define FAMILY_DUET 0x4000 -#define FAMILY_TRIAD 0x5000 -#define FAMILY_MSP4200 0x4200 -#define FAMILY_MSP4200_FPGA 0x4f00 -#define FAMILY_MSP7100 0x7100 -#define FAMILY_MSP7100_FPGA 0x7f00 - -/* Device Type definitions */ -#define TYPE_MSP7120 0x7120 -#define TYPE_MSP7130 0x7130 - -#define ENET_KEY 'E' -#define ENETTXD_KEY 'e' -#define PCI_KEY 'P' -#define PCIMUX_KEY 'p' -#define SEC_KEY 'S' -#define SPAD_KEY 'D' -#define TDM_KEY 'T' -#define ZSP_KEY 'Z' - -#define FEATURE_NOEXIST '-' -#define FEATURE_EXIST '+' - -#define ENET_MII 'M' -#define ENET_RMII 'R' - -#define ENETTXD_FALLING 'F' -#define ENETTXD_RISING 'R' - -#define PCI_HOST 'H' -#define PCI_PERIPHERAL 'P' - -#define PCIMUX_FULL 'F' -#define PCIMUX_SINGLE 'S' - -#define SEC_DUET 'D' -#define SEC_POLO 'P' -#define SEC_SLOW 'S' -#define SEC_TRIAD 'T' - -#define SPAD_POLO 'P' - -#define TDM_DUET 'D' /* DUET TDMs might exist */ -#define TDM_POLO 'P' /* POLO TDMs might exist */ -#define TDM_TRIAD 'T' /* TRIAD TDMs might exist */ - -#define ZSP_DUET 'D' /* one DUET zsp engine */ -#define ZSP_TRIAD 'T' /* two TRIAD zsp engines */ - -extern char *prom_getcmdline(void); -extern char *prom_getenv(char *name); -extern void prom_init_cmdline(void); -extern void prom_meminit(void); -extern void prom_fixup_mem_map(unsigned long start_mem, - unsigned long end_mem); - -#ifdef CONFIG_MTD_PMC_MSP_RAMROOT -extern bool get_ramroot(void **start, unsigned long *size); -#endif - -extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr); -extern unsigned long get_deviceid(void); -extern char identify_enet(unsigned long interface_num); -extern char identify_enetTxD(unsigned long interface_num); -extern char identify_pci(void); -extern char identify_sec(void); -extern char identify_spad(void); -extern char identify_sec(void); -extern char identify_tdm(void); -extern char identify_zsp(void); -extern unsigned long identify_family(void); -extern unsigned long identify_revision(void); - -/* - * The following macro calls prom_printf and puts the format string - * into an init section so it can be reclaimed. - */ -#define ppfinit(f, x...) \ - do { \ - static char _f[] __initdata = KERN_INFO f; \ - printk(_f, ## x); \ - } while (0) - -/* Memory descriptor management. */ -#define PROM_MAX_PMEMBLOCKS 7 /* 6 used */ - -enum yamon_memtypes { - yamon_dontuse, - yamon_prom, - yamon_free, -}; - -struct prom_pmemblock { - unsigned long base; /* Within KSEG0. */ - unsigned int size; /* In bytes. */ - unsigned int type; /* free or prom memory */ -}; - -extern int prom_argc; -extern char **prom_argv; -extern char **prom_envp; -extern int *prom_vec; -extern struct prom_pmemblock *prom_getmdesc(void); - -#endif /* !_ASM_MSP_PROM_H */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_regops.h b/include/asm-mips/pmc-sierra/msp71xx/msp_regops.h deleted file mode 100644 index 60a5a38dd5b2..000000000000 --- a/include/asm-mips/pmc-sierra/msp71xx/msp_regops.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * SMP/VPE-safe functions to access "registers" (see note). - * - * NOTES: -* - These macros use ll/sc instructions, so it is your responsibility to - * ensure these are available on your platform before including this file. - * - The MIPS32 spec states that ll/sc results are undefined for uncached - * accesses. This means they can't be used on HW registers accessed - * through kseg1. Code which requires these macros for this purpose must - * front-end the registers with cached memory "registers" and have a single - * thread update the actual HW registers. - * - A maximum of 2k of code can be inserted between ll and sc. Every - * memory accesses between the instructions will increase the chance of - * sc failing and having to loop. - * - When using custom_read_reg32/custom_write_reg32 only perform the - * necessary logical operations on the register value in between these - * two calls. All other logic should be performed before the first call. - * - There is a bug on the R10000 chips which has a workaround. If you - * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR' - * to be non-zero. If you are using this header from within linux, you may - * include before including this file to have this defined - * appropriately for you. - * - * Copyright 2005-2007 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO - * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., 675 - * Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_REGOPS_H__ -#define __ASM_REGOPS_H__ - -#include - -#include - -#ifndef R10000_LLSC_WAR -#define R10000_LLSC_WAR 0 -#endif - -#if R10000_LLSC_WAR == 1 -#define __beqz "beqzl " -#else -#define __beqz "beqz " -#endif - -#ifndef _LINUX_TYPES_H -typedef unsigned int u32; -#endif - -/* - * Sets all the masked bits to the corresponding value bits - */ -static inline void set_value_reg32(volatile u32 *const addr, - u32 const mask, - u32 const value) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set mips3 \n" - "1: ll %0, %1 # set_value_reg32 \n" - " and %0, %2 \n" - " or %0, %3 \n" - " sc %0, %1 \n" - " "__beqz"%0, 1b \n" - " nop \n" - " .set pop \n" - : "=&r" (temp), "=m" (*addr) - : "ir" (~mask), "ir" (value), "m" (*addr)); -} - -/* - * Sets all the masked bits to '1' - */ -static inline void set_reg32(volatile u32 *const addr, - u32 const mask) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set mips3 \n" - "1: ll %0, %1 # set_reg32 \n" - " or %0, %2 \n" - " sc %0, %1 \n" - " "__beqz"%0, 1b \n" - " nop \n" - " .set pop \n" - : "=&r" (temp), "=m" (*addr) - : "ir" (mask), "m" (*addr)); -} - -/* - * Sets all the masked bits to '0' - */ -static inline void clear_reg32(volatile u32 *const addr, - u32 const mask) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set mips3 \n" - "1: ll %0, %1 # clear_reg32 \n" - " and %0, %2 \n" - " sc %0, %1 \n" - " "__beqz"%0, 1b \n" - " nop \n" - " .set pop \n" - : "=&r" (temp), "=m" (*addr) - : "ir" (~mask), "m" (*addr)); -} - -/* - * Toggles all masked bits from '0' to '1' and '1' to '0' - */ -static inline void toggle_reg32(volatile u32 *const addr, - u32 const mask) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set mips3 \n" - "1: ll %0, %1 # toggle_reg32 \n" - " xor %0, %2 \n" - " sc %0, %1 \n" - " "__beqz"%0, 1b \n" - " nop \n" - " .set pop \n" - : "=&r" (temp), "=m" (*addr) - : "ir" (mask), "m" (*addr)); -} - -/* - * Read all masked bits others are returned as '0' - */ -static inline u32 read_reg32(volatile u32 *const addr, - u32 const mask) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " lw %0, %1 # read \n" - " and %0, %2 # mask \n" - " .set pop \n" - : "=&r" (temp) - : "m" (*addr), "ir" (mask)); - - return temp; -} - -/* - * blocking_read_reg32 - Read address with blocking load - * - * Uncached writes need to be read back to ensure they reach RAM. - * The returned value must be 'used' to prevent from becoming a - * non-blocking load. - */ -static inline u32 blocking_read_reg32(volatile u32 *const addr) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " lw %0, %1 # read \n" - " move %0, %0 # block \n" - " .set pop \n" - : "=&r" (temp) - : "m" (*addr)); - - return temp; -} - -/* - * For special strange cases only: - * - * If you need custom processing within a ll/sc loop, use the following macros - * VERY CAREFULLY: - * - * u32 tmp; <-- Define a variable to hold the data - * - * custom_read_reg32(address, tmp); <-- Reads the address and put the value - * in the 'tmp' variable given - * - * From here on out, you are (basicly) atomic, so don't do anything too - * fancy! - * Also, this code may loop if the end of this block fails to write - * everything back safely due do the other CPU, so do NOT do anything - * with side-effects! - * - * custom_write_reg32(address, tmp); <-- Writes back 'tmp' safely. - */ -#define custom_read_reg32(address, tmp) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set mips3 \n" \ - "1: ll %0, %1 #custom_read_reg32 \n" \ - " .set pop \n" \ - : "=r" (tmp), "=m" (*address) \ - : "m" (*address)) - -#define custom_write_reg32(address, tmp) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set mips3 \n" \ - " sc %0, %1 #custom_write_reg32 \n" \ - " "__beqz"%0, 1b \n" \ - " nop \n" \ - " .set pop \n" \ - : "=&r" (tmp), "=m" (*address) \ - : "0" (tmp), "m" (*address)) - -#endif /* __ASM_REGOPS_H__ */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h b/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h deleted file mode 100644 index 603eb737b4a8..000000000000 --- a/include/asm-mips/pmc-sierra/msp71xx/msp_regs.h +++ /dev/null @@ -1,663 +0,0 @@ -/* - * Defines for the address space, registers and register configuration - * (bit masks, access macros etc) for the PMC-Sierra line of MSP products. - * This file contains addess maps for all the devices in the line of - * products but only has register definitions and configuration masks for - * registers which aren't definitely associated with any device. Things - * like clock settings, reset access, the ELB etc. Individual device - * drivers will reference the appropriate XXX_BASE value defined here - * and have individual registers offset from that. - * - * Copyright (C) 2005-2007 PMC-Sierra, Inc. All rights reserved. - * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - */ - -#include -#include - -#ifndef _ASM_MSP_REGS_H -#define _ASM_MSP_REGS_H - -/* - ######################################################################## - # Address space and device base definitions # - ######################################################################## - */ - -/* - *************************************************************************** - * System Logic and Peripherals (ELB, UART0, etc) device address space * - *************************************************************************** - */ -#define MSP_SLP_BASE 0x1c000000 - /* System Logic and Peripherals */ -#define MSP_RST_BASE (MSP_SLP_BASE + 0x10) - /* System reset register base */ -#define MSP_RST_SIZE 0x0C /* System reset register space */ - -#define MSP_WTIMER_BASE (MSP_SLP_BASE + 0x04C) - /* watchdog timer base */ -#define MSP_ITIMER_BASE (MSP_SLP_BASE + 0x054) - /* internal timer base */ -#define MSP_UART0_BASE (MSP_SLP_BASE + 0x100) - /* UART0 controller base */ -#define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120) - /* Block Copy controller base */ -#define MSP_BCPY_DESC_BASE (MSP_SLP_BASE + 0x160) - /* Block Copy descriptor base */ - -/* - *************************************************************************** - * PCI address space * - *************************************************************************** - */ -#define MSP_PCI_BASE 0x19000000 - -/* - *************************************************************************** - * MSbus device address space * - *************************************************************************** - */ -#define MSP_MSB_BASE 0x18000000 - /* MSbus address start */ -#define MSP_PER_BASE (MSP_MSB_BASE + 0x400000) - /* Peripheral device registers */ -#define MSP_MAC0_BASE (MSP_MSB_BASE + 0x600000) - /* MAC A device registers */ -#define MSP_MAC1_BASE (MSP_MSB_BASE + 0x700000) - /* MAC B device registers */ -#define MSP_MAC_SIZE 0xE0 /* MAC register space */ - -#define MSP_SEC_BASE (MSP_MSB_BASE + 0x800000) - /* Security Engine registers */ -#define MSP_MAC2_BASE (MSP_MSB_BASE + 0x900000) - /* MAC C device registers */ -#define MSP_ADSL2_BASE (MSP_MSB_BASE + 0xA80000) - /* ADSL2 device registers */ -#define MSP_USB_BASE (MSP_MSB_BASE + 0xB40000) - /* USB device registers */ -#define MSP_USB_BASE_START (MSP_MSB_BASE + 0xB40100) - /* USB device registers */ -#define MSP_USB_BASE_END (MSP_MSB_BASE + 0xB401FF) - /* USB device registers */ -#define MSP_CPUIF_BASE (MSP_MSB_BASE + 0xC00000) - /* CPU interface registers */ - -/* Devices within the MSbus peripheral block */ -#define MSP_UART1_BASE (MSP_PER_BASE + 0x030) - /* UART1 controller base */ -#define MSP_SPI_BASE (MSP_PER_BASE + 0x058) - /* SPI/MPI control registers */ -#define MSP_TWI_BASE (MSP_PER_BASE + 0x090) - /* Two-wire control registers */ -#define MSP_PTIMER_BASE (MSP_PER_BASE + 0x0F0) - /* Programmable timer control */ - -/* - *************************************************************************** - * Physical Memory configuration address space * - *************************************************************************** - */ -#define MSP_MEM_CFG_BASE 0x17f00000 - -#define MSP_MEM_INDIRECT_CTL_10 0x10 - -/* - * Notes: - * 1) The SPI registers are split into two blocks, one offset from the - * MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by - * 0x68. The SPI driver definitions for the register must be aware - * of this. - * 2) The block copy engine register are divided into two regions, one - * for the control/configuration of the engine proper and one for the - * values of the descriptors used in the copy process. These have - * different base defines (CTRL_BASE vs DESC_BASE) - * 3) These constants are for physical addresses which means that they - * work correctly with "ioremap" and friends. This means that device - * drivers will need to remap these addresses using ioremap and perhaps - * the readw/writew macros. Or they could use the regptr() macro - * defined below, but the readw/writew calls are the correct thing. - * 4) The UARTs have an additional status register offset from the base - * address. This register isn't used in the standard 8250 driver but - * may be used in other software. Consult the hardware datasheet for - * offset details. - * 5) For some unknown reason the security engine (MSP_SEC_BASE) registers - * start at an offset of 0x84 from the base address but the block of - * registers before this is reserved for the security engine. The - * driver will have to be aware of this but it makes the register - * definitions line up better with the documentation. - */ - -/* - ######################################################################## - # System register definitions. Not associated with a specific device # - ######################################################################## - */ - -/* - * This macro maps the physical register number into uncached space - * and (for C code) casts it into a u32 pointer so it can be dereferenced - * Normally these would be accessed with ioremap and readX/writeX, but - * these are convenient for a lot of internal kernel code. - */ -#ifdef __ASSEMBLER__ - #define regptr(addr) (KSEG1ADDR(addr)) -#else - #define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr))) -#endif - -/* - *************************************************************************** - * System Logic and Peripherals (RESET, ELB, etc) registers * - *************************************************************************** - */ - -/* System Control register definitions */ -#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00) - /* Device-ID RO */ -#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04) - /* Firmware-ID Register RW */ -#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08) - /* System-ID Register-0 RW */ -#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C) - /* System-ID Register-1 RW */ - -/* System Reset register definitions */ -#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10) - /* System Reset Status RO */ -#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14) - /* System Set Reset WO */ -#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18) - /* System Clear Reset WO */ - -/* System Clock Registers */ -#define PCI_SLP_REG regptr(MSP_SLP_BASE + 0x1C) - /* PCI clock generator RW */ -#define URT_SLP_REG regptr(MSP_SLP_BASE + 0x20) - /* UART clock generator RW */ -/* reserved (MSP_SLP_BASE + 0x24) */ -/* reserved (MSP_SLP_BASE + 0x28) */ -#define PLL1_SLP_REG regptr(MSP_SLP_BASE + 0x2C) - /* PLL1 clock generator RW */ -#define PLL0_SLP_REG regptr(MSP_SLP_BASE + 0x30) - /* PLL0 clock generator RW */ -#define MIPS_SLP_REG regptr(MSP_SLP_BASE + 0x34) - /* MIPS clock generator RW */ -#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38) - /* Voice Eng clock generator RW */ -/* reserved (MSP_SLP_BASE + 0x3C) */ -#define MSB_SLP_REG regptr(MSP_SLP_BASE + 0x40) - /* MS-Bus clock generator RW */ -#define SMAC_SLP_REG regptr(MSP_SLP_BASE + 0x44) - /* Sec & MAC clock generator RW */ -#define PERF_SLP_REG regptr(MSP_SLP_BASE + 0x48) - /* Per & TDM clock generator RW */ - -/* Interrupt Controller Registers */ -#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70) - /* Interrupt status register RW */ -#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74) - /* Interrupt enable/mask RW */ -#define SE_MBOX_REG regptr(MSP_SLP_BASE + 0x78) - /* Security Engine mailbox RW */ -#define VE_MBOX_REG regptr(MSP_SLP_BASE + 0x7C) - /* Voice Engine mailbox RW */ - -/* ELB Controller Registers */ -#define CS0_CNFG_REG regptr(MSP_SLP_BASE + 0x80) - /* ELB CS0 Configuration Reg */ -#define CS0_ADDR_REG regptr(MSP_SLP_BASE + 0x84) - /* ELB CS0 Base Address Reg */ -#define CS0_MASK_REG regptr(MSP_SLP_BASE + 0x88) - /* ELB CS0 Mask Register */ -#define CS0_ACCESS_REG regptr(MSP_SLP_BASE + 0x8C) - /* ELB CS0 access register */ - -#define CS1_CNFG_REG regptr(MSP_SLP_BASE + 0x90) - /* ELB CS1 Configuration Reg */ -#define CS1_ADDR_REG regptr(MSP_SLP_BASE + 0x94) - /* ELB CS1 Base Address Reg */ -#define CS1_MASK_REG regptr(MSP_SLP_BASE + 0x98) - /* ELB CS1 Mask Register */ -#define CS1_ACCESS_REG regptr(MSP_SLP_BASE + 0x9C) - /* ELB CS1 access register */ - -#define CS2_CNFG_REG regptr(MSP_SLP_BASE + 0xA0) - /* ELB CS2 Configuration Reg */ -#define CS2_ADDR_REG regptr(MSP_SLP_BASE + 0xA4) - /* ELB CS2 Base Address Reg */ -#define CS2_MASK_REG regptr(MSP_SLP_BASE + 0xA8) - /* ELB CS2 Mask Register */ -#define CS2_ACCESS_REG regptr(MSP_SLP_BASE + 0xAC) - /* ELB CS2 access register */ - -#define CS3_CNFG_REG regptr(MSP_SLP_BASE + 0xB0) - /* ELB CS3 Configuration Reg */ -#define CS3_ADDR_REG regptr(MSP_SLP_BASE + 0xB4) - /* ELB CS3 Base Address Reg */ -#define CS3_MASK_REG regptr(MSP_SLP_BASE + 0xB8) - /* ELB CS3 Mask Register */ -#define CS3_ACCESS_REG regptr(MSP_SLP_BASE + 0xBC) - /* ELB CS3 access register */ - -#define CS4_CNFG_REG regptr(MSP_SLP_BASE + 0xC0) - /* ELB CS4 Configuration Reg */ -#define CS4_ADDR_REG regptr(MSP_SLP_BASE + 0xC4) - /* ELB CS4 Base Address Reg */ -#define CS4_MASK_REG regptr(MSP_SLP_BASE + 0xC8) - /* ELB CS4 Mask Register */ -#define CS4_ACCESS_REG regptr(MSP_SLP_BASE + 0xCC) - /* ELB CS4 access register */ - -#define CS5_CNFG_REG regptr(MSP_SLP_BASE + 0xD0) - /* ELB CS5 Configuration Reg */ -#define CS5_ADDR_REG regptr(MSP_SLP_BASE + 0xD4) - /* ELB CS5 Base Address Reg */ -#define CS5_MASK_REG regptr(MSP_SLP_BASE + 0xD8) - /* ELB CS5 Mask Register */ -#define CS5_ACCESS_REG regptr(MSP_SLP_BASE + 0xDC) - /* ELB CS5 access register */ - -/* reserved 0xE0 - 0xE8 */ -#define ELB_1PC_EN_REG regptr(MSP_SLP_BASE + 0xEC) - /* ELB single PC card detect */ - -/* reserved 0xF0 - 0xF8 */ -#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC) - /* SDRAM read/ELB timing Reg */ - -/* Extended UART status registers */ -#define UART0_STATUS_REG regptr(MSP_UART0_BASE + 0x0c0) - /* UART Status Register 0 */ -#define UART1_STATUS_REG regptr(MSP_UART1_BASE + 0x170) - /* UART Status Register 1 */ - -/* Performance monitoring registers */ -#define PERF_MON_CTRL_REG regptr(MSP_SLP_BASE + 0x140) - /* Performance monitor control */ -#define PERF_MON_CLR_REG regptr(MSP_SLP_BASE + 0x144) - /* Performance monitor clear */ -#define PERF_MON_CNTH_REG regptr(MSP_SLP_BASE + 0x148) - /* Perf monitor counter high */ -#define PERF_MON_CNTL_REG regptr(MSP_SLP_BASE + 0x14C) - /* Perf monitor counter low */ - -/* System control registers */ -#define SYS_CTRL_REG regptr(MSP_SLP_BASE + 0x150) - /* System control register */ -#define SYS_ERR1_REG regptr(MSP_SLP_BASE + 0x154) - /* System Error status 1 */ -#define SYS_ERR2_REG regptr(MSP_SLP_BASE + 0x158) - /* System Error status 2 */ -#define SYS_INT_CFG_REG regptr(MSP_SLP_BASE + 0x15C) - /* System Interrupt config */ - -/* Voice Engine Memory configuration */ -#define VE_MEM_REG regptr(MSP_SLP_BASE + 0x17C) - /* Voice engine memory config */ - -/* CPU/SLP Error Status registers */ -#define CPU_ERR1_REG regptr(MSP_SLP_BASE + 0x180) - /* CPU/SLP Error status 1 */ -#define CPU_ERR2_REG regptr(MSP_SLP_BASE + 0x184) - /* CPU/SLP Error status 1 */ - -#define EXTENDED_GPIO_REG regptr(MSP_SLP_BASE + 0x188) - /* Extended GPIO register */ - -/* System Error registers */ -#define SLP_ERR_STS_REG regptr(MSP_SLP_BASE + 0x190) - /* Int status for SLP errors */ -#define SLP_ERR_MSK_REG regptr(MSP_SLP_BASE + 0x194) - /* Int mask for SLP errors */ -#define SLP_ELB_ERST_REG regptr(MSP_SLP_BASE + 0x198) - /* External ELB reset */ -#define SLP_BOOT_STS_REG regptr(MSP_SLP_BASE + 0x19C) - /* Boot Status */ - -/* Extended ELB addressing */ -#define CS0_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A0) - /* CS0 Extended address */ -#define CS1_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A4) - /* CS1 Extended address */ -#define CS2_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A8) - /* CS2 Extended address */ -#define CS3_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1AC) - /* CS3 Extended address */ -/* reserved 0x1B0 */ -#define CS5_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1B4) - /* CS5 Extended address */ - -/* PLL Adjustment registers */ -#define PLL_LOCK_REG regptr(MSP_SLP_BASE + 0x200) - /* PLL0 lock status */ -#define PLL_ARST_REG regptr(MSP_SLP_BASE + 0x204) - /* PLL Analog reset status */ -#define PLL0_ADJ_REG regptr(MSP_SLP_BASE + 0x208) - /* PLL0 Adjustment value */ -#define PLL1_ADJ_REG regptr(MSP_SLP_BASE + 0x20C) - /* PLL1 Adjustment value */ - -/* - *************************************************************************** - * Peripheral Register definitions * - *************************************************************************** - */ - -/* Peripheral status */ -#define PER_CTRL_REG regptr(MSP_PER_BASE + 0x50) - /* Peripheral control register */ -#define PER_STS_REG regptr(MSP_PER_BASE + 0x54) - /* Peripheral status register */ - -/* SPI/MPI Registers */ -#define SMPI_TX_SZ_REG regptr(MSP_PER_BASE + 0x58) - /* SPI/MPI Tx Size register */ -#define SMPI_RX_SZ_REG regptr(MSP_PER_BASE + 0x5C) - /* SPI/MPI Rx Size register */ -#define SMPI_CTL_REG regptr(MSP_PER_BASE + 0x60) - /* SPI/MPI Control register */ -#define SMPI_MS_REG regptr(MSP_PER_BASE + 0x64) - /* SPI/MPI Chip Select reg */ -#define SMPI_CORE_DATA_REG regptr(MSP_PER_BASE + 0xC0) - /* SPI/MPI Core Data reg */ -#define SMPI_CORE_CTRL_REG regptr(MSP_PER_BASE + 0xC4) - /* SPI/MPI Core Control reg */ -#define SMPI_CORE_STAT_REG regptr(MSP_PER_BASE + 0xC8) - /* SPI/MPI Core Status reg */ -#define SMPI_CORE_SSEL_REG regptr(MSP_PER_BASE + 0xCC) - /* SPI/MPI Core Ssel reg */ -#define SMPI_FIFO_REG regptr(MSP_PER_BASE + 0xD0) - /* SPI/MPI Data FIFO reg */ - -/* Peripheral Block Error Registers */ -#define PER_ERR_STS_REG regptr(MSP_PER_BASE + 0x70) - /* Error Bit Status Register */ -#define PER_ERR_MSK_REG regptr(MSP_PER_BASE + 0x74) - /* Error Bit Mask Register */ -#define PER_HDR1_REG regptr(MSP_PER_BASE + 0x78) - /* Error Header 1 Register */ -#define PER_HDR2_REG regptr(MSP_PER_BASE + 0x7C) - /* Error Header 2 Register */ - -/* Peripheral Block Interrupt Registers */ -#define PER_INT_STS_REG regptr(MSP_PER_BASE + 0x80) - /* Interrupt status register */ -#define PER_INT_MSK_REG regptr(MSP_PER_BASE + 0x84) - /* Interrupt Mask Register */ -#define GPIO_INT_STS_REG regptr(MSP_PER_BASE + 0x88) - /* GPIO interrupt status reg */ -#define GPIO_INT_MSK_REG regptr(MSP_PER_BASE + 0x8C) - /* GPIO interrupt MASK Reg */ - -/* POLO GPIO registers */ -#define POLO_GPIO_DAT1_REG regptr(MSP_PER_BASE + 0x0E0) - /* Polo GPIO[8:0] data reg */ -#define POLO_GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x0E4) - /* Polo GPIO[7:0] config reg */ -#define POLO_GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x0E8) - /* Polo GPIO[15:8] config reg */ -#define POLO_GPIO_OD1_REG regptr(MSP_PER_BASE + 0x0EC) - /* Polo GPIO[31:0] output drive */ -#define POLO_GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x170) - /* Polo GPIO[23:16] config reg */ -#define POLO_GPIO_DAT2_REG regptr(MSP_PER_BASE + 0x174) - /* Polo GPIO[15:9] data reg */ -#define POLO_GPIO_DAT3_REG regptr(MSP_PER_BASE + 0x178) - /* Polo GPIO[23:16] data reg */ -#define POLO_GPIO_DAT4_REG regptr(MSP_PER_BASE + 0x17C) - /* Polo GPIO[31:24] data reg */ -#define POLO_GPIO_DAT5_REG regptr(MSP_PER_BASE + 0x180) - /* Polo GPIO[39:32] data reg */ -#define POLO_GPIO_DAT6_REG regptr(MSP_PER_BASE + 0x184) - /* Polo GPIO[47:40] data reg */ -#define POLO_GPIO_DAT7_REG regptr(MSP_PER_BASE + 0x188) - /* Polo GPIO[54:48] data reg */ -#define POLO_GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) - /* Polo GPIO[31:24] config reg */ -#define POLO_GPIO_CFG5_REG regptr(MSP_PER_BASE + 0x190) - /* Polo GPIO[39:32] config reg */ -#define POLO_GPIO_CFG6_REG regptr(MSP_PER_BASE + 0x194) - /* Polo GPIO[47:40] config reg */ -#define POLO_GPIO_CFG7_REG regptr(MSP_PER_BASE + 0x198) - /* Polo GPIO[54:48] config reg */ -#define POLO_GPIO_OD2_REG regptr(MSP_PER_BASE + 0x19C) - /* Polo GPIO[54:32] output drive */ - -/* Generic GPIO registers */ -#define GPIO_DATA1_REG regptr(MSP_PER_BASE + 0x170) - /* GPIO[1:0] data register */ -#define GPIO_DATA2_REG regptr(MSP_PER_BASE + 0x174) - /* GPIO[5:2] data register */ -#define GPIO_DATA3_REG regptr(MSP_PER_BASE + 0x178) - /* GPIO[9:6] data register */ -#define GPIO_DATA4_REG regptr(MSP_PER_BASE + 0x17C) - /* GPIO[15:10] data register */ -#define GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x180) - /* GPIO[1:0] config register */ -#define GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x184) - /* GPIO[5:2] config register */ -#define GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x188) - /* GPIO[9:6] config register */ -#define GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) - /* GPIO[15:10] config register */ -#define GPIO_OD_REG regptr(MSP_PER_BASE + 0x190) - /* GPIO[15:0] output drive */ - -/* - *************************************************************************** - * CPU Interface register definitions * - *************************************************************************** - */ -#define PCI_FLUSH_REG regptr(MSP_CPUIF_BASE + 0x00) - /* PCI-SDRAM queue flush trigger */ -#define OCP_ERR1_REG regptr(MSP_CPUIF_BASE + 0x04) - /* OCP Error Attribute 1 */ -#define OCP_ERR2_REG regptr(MSP_CPUIF_BASE + 0x08) - /* OCP Error Attribute 2 */ -#define OCP_STS_REG regptr(MSP_CPUIF_BASE + 0x0C) - /* OCP Error Status */ -#define CPUIF_PM_REG regptr(MSP_CPUIF_BASE + 0x10) - /* CPU policy configuration */ -#define CPUIF_CFG_REG regptr(MSP_CPUIF_BASE + 0x10) - /* Misc configuration options */ - -/* Central Interrupt Controller Registers */ -#define MSP_CIC_BASE (MSP_CPUIF_BASE + 0x8000) - /* Central Interrupt registers */ -#define CIC_EXT_CFG_REG regptr(MSP_CIC_BASE + 0x00) - /* External interrupt config */ -#define CIC_STS_REG regptr(MSP_CIC_BASE + 0x04) - /* CIC Interrupt Status */ -#define CIC_VPE0_MSK_REG regptr(MSP_CIC_BASE + 0x08) - /* VPE0 Interrupt Mask */ -#define CIC_VPE1_MSK_REG regptr(MSP_CIC_BASE + 0x0C) - /* VPE1 Interrupt Mask */ -#define CIC_TC0_MSK_REG regptr(MSP_CIC_BASE + 0x10) - /* Thread Context 0 Int Mask */ -#define CIC_TC1_MSK_REG regptr(MSP_CIC_BASE + 0x14) - /* Thread Context 1 Int Mask */ -#define CIC_TC2_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 2 Int Mask */ -#define CIC_TC3_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 3 Int Mask */ -#define CIC_TC4_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 4 Int Mask */ -#define CIC_PCIMSI_STS_REG regptr(MSP_CIC_BASE + 0x18) -#define CIC_PCIMSI_MSK_REG regptr(MSP_CIC_BASE + 0x18) -#define CIC_PCIFLSH_REG regptr(MSP_CIC_BASE + 0x18) -#define CIC_VPE0_SWINT_REG regptr(MSP_CIC_BASE + 0x08) - - -/* - *************************************************************************** - * Memory controller registers * - *************************************************************************** - */ -#define MEM_CFG1_REG regptr(MSP_MEM_CFG_BASE + 0x00) -#define MEM_SS_ADDR regptr(MSP_MEM_CFG_BASE + 0x00) -#define MEM_SS_DATA regptr(MSP_MEM_CFG_BASE + 0x04) -#define MEM_SS_WRITE regptr(MSP_MEM_CFG_BASE + 0x08) - -/* - *************************************************************************** - * PCI controller registers * - *************************************************************************** - */ -#define PCI_BASE_REG regptr(MSP_PCI_BASE + 0x00) -#define PCI_CONFIG_SPACE_REG regptr(MSP_PCI_BASE + 0x800) -#define PCI_JTAG_DEVID_REG regptr(MSP_SLP_BASE + 0x13c) - -/* - ######################################################################## - # Register content & macro definitions # - ######################################################################## - */ - -/* - *************************************************************************** - * DEV_ID defines * - *************************************************************************** - */ -#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */ -#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */ -#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */ -#define DEV_ID_FAMILY (0xff << 8) /* family ID code */ -#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */ - -#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */ -#define MSP5000_ID (0x50 << 8) -#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */ -#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */ -#define MSP4200_ID (0x42 << 8) -#define MSP4000_ID (0x40 << 8) -#define MSP2XXX_ID (0x20 << 8) -#define MSPZEUS_ID (0x10 << 8) - -#define MSP2004_SUB_ID (0x0 << 16) -#define MSP2005_SUB_ID (0x1 << 16) -#define MSP2006_SUB_ID (0x1 << 16) -#define MSP2007_SUB_ID (0x2 << 16) -#define MSP2010_SUB_ID (0x3 << 16) -#define MSP2015_SUB_ID (0x4 << 16) -#define MSP2020_SUB_ID (0x5 << 16) -#define MSP2100_SUB_ID (0x6 << 16) - -/* - *************************************************************************** - * RESET defines * - *************************************************************************** - */ -#define MSP_GR_RST (0x01 << 0) /* Global reset bit */ -#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */ -#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */ -#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */ -/* reserved */ -#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */ -#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */ -#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */ -#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */ -#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */ -#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */ -#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */ -#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */ -#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */ - -/* - *************************************************************************** - * UART defines * - *************************************************************************** - */ -#define MSP_BASE_BAUD 25000000 -#define MSP_UART_REG_LEN 0x20 - -/* - *************************************************************************** - * ELB defines * - *************************************************************************** - */ -#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */ -#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */ - -/* - *************************************************************************** - * CIC defines * - *************************************************************************** - */ - -/* CIC_EXT_CFG_REG */ -#define EXT_INT_POL(eirq) (1 << (eirq + 8)) -#define EXT_INT_EDGE(eirq) (1 << eirq) - -#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq) (reg &= ~EXT_INT_EDGE(eirq)) -#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq) (reg |= EXT_INT_EDGE(eirq)) -#define CIC_EXT_SET_ACTIVE_HI(reg, eirq) (reg |= EXT_INT_POL(eirq)) -#define CIC_EXT_SET_ACTIVE_LO(reg, eirq) (reg &= ~EXT_INT_POL(eirq)) -#define CIC_EXT_SET_ACTIVE_RISING CIC_EXT_SET_ACTIVE_HI -#define CIC_EXT_SET_ACTIVE_FALLING CIC_EXT_SET_ACTIVE_LO - -#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \ - ((reg & EXT_INT_EDGE(eirq)) == 0) -#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq) (reg & EXT_INT_EDGE(eirq)) -#define CIC_EXT_IS_ACTIVE_HI(reg, eirq) (reg & EXT_INT_POL(eirq)) -#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \ - ((reg & EXT_INT_POL(eirq)) == 0) -#define CIC_EXT_IS_ACTIVE_RISING CIC_EXT_IS_ACTIVE_HI -#define CIC_EXT_IS_ACTIVE_FALLING CIC_EXT_IS_ACTIVE_LO - -/* - *************************************************************************** - * Memory Controller defines * - *************************************************************************** - */ - -/* Indirect memory controller registers */ -#define DDRC_CFG(n) (n) -#define DDRC_DEBUG(n) (0x04 + n) -#define DDRC_CTL(n) (0x40 + n) - -/* Macro to perform DDRC indirect write */ -#define DDRC_INDIRECT_WRITE(reg, mask, value) \ -({ \ - *MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \ - *MEM_SS_DATA = (value); \ - *MEM_SS_WRITE = 1; \ -}) - -/* - *************************************************************************** - * SPI/MPI Mode * - *************************************************************************** - */ -#define SPI_MPI_RX_BUSY 0x00008000 /* SPI/MPI Receive Busy */ -#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */ -#define SPI_MPI_TX_BUSY 0x00002000 /* SPI/MPI Transmit Busy */ -#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */ - -/* - *************************************************************************** - * SPI/MPI Control Register * - *************************************************************************** - */ -#define SPI_MPI_RX_START 0x00000004 /* Start receive command */ -#define SPI_MPI_FLUSH_Q 0x00000002 /* Flush SPI/MPI Queue */ -#define SPI_MPI_TX_START 0x00000001 /* Start Transmit Command */ - -#endif /* !_ASM_MSP_REGS_H */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_slp_int.h b/include/asm-mips/pmc-sierra/msp71xx/msp_slp_int.h deleted file mode 100644 index 96d4c8ce8c83..000000000000 --- a/include/asm-mips/pmc-sierra/msp71xx/msp_slp_int.h +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Defines for the MSP interrupt controller. - * - * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. - * Author: Carsten Langgaard, carstenl@mips.com - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - */ - -#ifndef _MSP_SLP_INT_H -#define _MSP_SLP_INT_H - -/* - * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded - * hierarchical system. The first level are the direct MIPS interrupts - * and are assigned the interrupt range 0-7. The second level is the SLM - * interrupt controller and is assigned the range 8-39. The third level - * comprises the Peripherial block, the PCI block, the PCI MSI block and - * the SLP. The PCI interrupts and the SLP errors are handled by the - * relevant subsystems so the core interrupt code needs only concern - * itself with the Peripheral block. These are assigned interrupts in - * the range 40-71. - */ - -/* - * IRQs directly connected to CPU - */ -#define MSP_MIPS_INTBASE 0 -#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ -#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ -#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ -#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ -#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */ -#define MSP_INT_VE 5 /* IRQ for Voice Engine, C_IRQ3 */ -#define MSP_INT_SLP 6 /* IRQ for SLM block, C_IRQ4 */ -#define MSP_INT_TIMER 7 /* IRQ for the MIPS timer, C_IRQ5 */ - -/* - * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) - * These defines should be tied to the register definition for the SLM - * interrupt routine. For now, just use hard-coded values. - */ -#define MSP_SLP_INTBASE (MSP_MIPS_INTBASE + 8) -#define MSP_INT_EXT0 (MSP_SLP_INTBASE + 0) - /* External interrupt 0 */ -#define MSP_INT_EXT1 (MSP_SLP_INTBASE + 1) - /* External interrupt 1 */ -#define MSP_INT_EXT2 (MSP_SLP_INTBASE + 2) - /* External interrupt 2 */ -#define MSP_INT_EXT3 (MSP_SLP_INTBASE + 3) - /* External interrupt 3 */ -/* Reserved 4-7 */ - -/* - ************************************************************************* - * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER * - * Some MSP produces have this interrupt labelled as Voice and some are * - * SEC mbox ... * - ************************************************************************* - */ -#define MSP_INT_SLP_VE (MSP_SLP_INTBASE + 8) - /* Cascaded IRQ for Voice Engine*/ -#define MSP_INT_SLP_TDM (MSP_SLP_INTBASE + 9) - /* TDM interrupt */ -#define MSP_INT_SLP_MAC0 (MSP_SLP_INTBASE + 10) - /* Cascaded IRQ for MAC 0 */ -#define MSP_INT_SLP_MAC1 (MSP_SLP_INTBASE + 11) - /* Cascaded IRQ for MAC 1 */ -#define MSP_INT_SEC (MSP_SLP_INTBASE + 12) - /* IRQ for security engine */ -#define MSP_INT_PER (MSP_SLP_INTBASE + 13) - /* Peripheral interrupt */ -#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14) - /* SLP timer 0 */ -#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15) - /* SLP timer 1 */ -#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16) - /* SLP timer 2 */ -#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17) - /* Cascaded MIPS timer */ -#define MSP_INT_BLKCP (MSP_SLP_INTBASE + 18) - /* Block Copy */ -#define MSP_INT_UART0 (MSP_SLP_INTBASE + 19) - /* UART 0 */ -#define MSP_INT_PCI (MSP_SLP_INTBASE + 20) - /* PCI subsystem */ -#define MSP_INT_PCI_DBELL (MSP_SLP_INTBASE + 21) - /* PCI doorbell */ -#define MSP_INT_PCI_MSI (MSP_SLP_INTBASE + 22) - /* PCI Message Signal */ -#define MSP_INT_PCI_BC0 (MSP_SLP_INTBASE + 23) - /* PCI Block Copy 0 */ -#define MSP_INT_PCI_BC1 (MSP_SLP_INTBASE + 24) - /* PCI Block Copy 1 */ -#define MSP_INT_SLP_ERR (MSP_SLP_INTBASE + 25) - /* SLP error condition */ -#define MSP_INT_MAC2 (MSP_SLP_INTBASE + 26) - /* IRQ for MAC2 */ -/* Reserved 26-31 */ - -/* - * IRQs cascaded on SLP PER interrupt (MSP_INT_PER) - */ -#define MSP_PER_INTBASE (MSP_SLP_INTBASE + 32) -/* Reserved 0-1 */ -#define MSP_INT_UART1 (MSP_PER_INTBASE + 2) - /* UART 1 */ -/* Reserved 3-5 */ -#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) - /* 2-wire */ -#define MSP_INT_TM0 (MSP_PER_INTBASE + 7) - /* Peripheral timer block out 0 */ -#define MSP_INT_TM1 (MSP_PER_INTBASE + 8) - /* Peripheral timer block out 1 */ -/* Reserved 9 */ -#define MSP_INT_SPRX (MSP_PER_INTBASE + 10) - /* SPI RX complete */ -#define MSP_INT_SPTX (MSP_PER_INTBASE + 11) - /* SPI TX complete */ -#define MSP_INT_GPIO (MSP_PER_INTBASE + 12) - /* GPIO */ -#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) - /* Peripheral error */ -/* Reserved 14-31 */ - -#endif /* !_MSP_SLP_INT_H */ diff --git a/include/asm-mips/pmc-sierra/msp71xx/war.h b/include/asm-mips/pmc-sierra/msp71xx/war.h deleted file mode 100644 index 0bf48fc1892b..000000000000 --- a/include/asm-mips/pmc-sierra/msp71xx/war.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_PMC_SIERRA_WAR_H -#define __ASM_MIPS_PMC_SIERRA_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \ - defined(CONFIG_PMC_MSP7120_FPGA) -#define MIPS34K_MISSED_ITLB_WAR 1 -#endif - -#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */ diff --git a/include/asm-mips/pmon.h b/include/asm-mips/pmon.h deleted file mode 100644 index 6ad519189ce2..000000000000 --- a/include/asm-mips/pmon.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 by Ralf Baechle - * - * The cpustart method is a PMC-Sierra's function to start the secondary CPU. - * Stock PMON 2000 has the smpfork, semlock and semunlock methods instead. - */ -#ifndef _ASM_PMON_H -#define _ASM_PMON_H - -struct callvectors { - int (*open) (char*, int, int); - int (*close) (int); - int (*read) (int, void*, int); - int (*write) (int, void*, int); - off_t (*lseek) (int, off_t, int); - int (*printf) (const char*, ...); - void (*cacheflush) (void); - char* (*gets) (char*); - union { - int (*smpfork) (unsigned long cp, char *sp); - int (*cpustart) (long, void (*)(void), void *, long); - } _s; - int (*semlock) (int sem); - void (*semunlock) (int sem); -}; - -extern struct callvectors *debug_vectors; - -#define pmon_open(name, flags, mode) debug_vectors->open(name, flage, mode) -#define pmon_close(fd) debug_vectors->close(fd) -#define pmon_read(fd, buf, count) debug_vectors->read(fd, buf, count) -#define pmon_write(fd, buf, count) debug_vectors->write(fd, buf, count) -#define pmon_lseek(fd, off, whence) debug_vectors->lseek(fd, off, whence) -#define pmon_printf(fmt...) debug_vectors->printf(fmt) -#define pmon_cacheflush() debug_vectors->cacheflush() -#define pmon_gets(s) debug_vectors->gets(s) -#define pmon_cpustart(n, f, sp, gp) debug_vectors->_s.cpustart(n, f, sp, gp) -#define pmon_smpfork(cp, sp) debug_vectors->_s.smpfork(cp, sp) -#define pmon_semlock(sem) debug_vectors->semlock(sem) -#define pmon_semunlock(sem) debug_vectors->semunlock(sem) - -#endif /* _ASM_PMON_H */ diff --git a/include/asm-mips/poll.h b/include/asm-mips/poll.h deleted file mode 100644 index 47b952080431..000000000000 --- a/include/asm-mips/poll.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_POLL_H -#define __ASM_POLL_H - -#define POLLWRNORM POLLOUT -#define POLLWRBAND 0x0100 - -#include - -#endif /* __ASM_POLL_H */ diff --git a/include/asm-mips/posix_types.h b/include/asm-mips/posix_types.h deleted file mode 100644 index c200102c8586..000000000000 --- a/include/asm-mips/posix_types.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 97, 98, 99, 2000 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_POSIX_TYPES_H -#define _ASM_POSIX_TYPES_H - -#include - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned int __kernel_mode_t; -#if (_MIPS_SZLONG == 32) -typedef unsigned long __kernel_nlink_t; -#endif -#if (_MIPS_SZLONG == 64) -typedef unsigned int __kernel_nlink_t; -#endif -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef int __kernel_ipc_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; -#if (_MIPS_SZLONG == 32) -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -#endif -#if (_MIPS_SZLONG == 64) -typedef unsigned long __kernel_size_t; -typedef long __kernel_ssize_t; -typedef long __kernel_ptrdiff_t; -#endif -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef long __kernel_daddr_t; -typedef char * __kernel_caddr_t; - -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; -typedef __kernel_uid_t __kernel_old_uid_t; -typedef __kernel_gid_t __kernel_old_gid_t; -typedef unsigned int __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if (_MIPS_SZLONG == 32) - long val[2]; -#endif -#if (_MIPS_SZLONG == 64) - int val[2]; -#endif -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) */ - -#endif /* _ASM_POSIX_TYPES_H */ diff --git a/include/asm-mips/prefetch.h b/include/asm-mips/prefetch.h deleted file mode 100644 index 17850834ccb0..000000000000 --- a/include/asm-mips/prefetch.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 by Ralf Baechle - */ -#ifndef __ASM_PREFETCH_H -#define __ASM_PREFETCH_H - - -/* - * R5000 and RM5200 implements pref and prefx instructions but they're nops, so - * rather than wasting time we pretend these processors don't support - * prefetching at all. - * - * R5432 implements Load, Store, LoadStreamed, StoreStreamed, LoadRetained, - * StoreRetained and WriteBackInvalidate but not Pref_PrepareForStore. - * - * Hell (and the book on my shelf I can't open ...) know what the R8000 does. - * - * RM7000 version 1.0 interprets all hints as Pref_Load; version 2.0 implements - * Pref_PrepareForStore also. - * - * RM9000 is MIPS IV but implements prefetching like MIPS32/MIPS64; it's - * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in - * current versions due to erratum G105. - * - * VR7701 only implements the Load prefetch. - * - * Finally MIPS32 and MIPS64 implement all of the following hints. - */ - -#define Pref_Load 0 -#define Pref_Store 1 - /* 2 and 3 are reserved */ -#define Pref_LoadStreamed 4 -#define Pref_StoreStreamed 5 -#define Pref_LoadRetained 6 -#define Pref_StoreRetained 7 - /* 8 ... 24 are reserved */ -#define Pref_WriteBackInvalidate 25 -#define Pref_PrepareForStore 30 - -#ifdef __ASSEMBLY__ - - .macro __pref hint addr -#ifdef CONFIG_CPU_HAS_PREFETCH - pref \hint, \addr -#endif - .endm - - .macro pref_load addr - __pref Pref_Load, \addr - .endm - - .macro pref_store addr - __pref Pref_Store, \addr - .endm - - .macro pref_load_streamed addr - __pref Pref_LoadStreamed, \addr - .endm - - .macro pref_store_streamed addr - __pref Pref_StoreStreamed, \addr - .endm - - .macro pref_load_retained addr - __pref Pref_LoadRetained, \addr - .endm - - .macro pref_store_retained addr - __pref Pref_StoreRetained, \addr - .endm - - .macro pref_wback_inv addr - __pref Pref_WriteBackInvalidate, \addr - .endm - - .macro pref_prepare_for_store addr - __pref Pref_PrepareForStore, \addr - .endm - -#endif - -#endif /* __ASM_PREFETCH_H */ diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h deleted file mode 100644 index a1e4453469f9..000000000000 --- a/include/asm-mips/processor.h +++ /dev/null @@ -1,263 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 Waldorf GMBH - * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle - * Copyright (C) 1996 Paul M. Antoine - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_PROCESSOR_H -#define _ASM_PROCESSOR_H - -#include -#include - -#include -#include -#include -#include -#include -#include - -/* - * Return current * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -/* - * System setup and hardware flags.. - */ -extern void (*cpu_wait)(void); - -extern unsigned int vced_count, vcei_count; - -#ifdef CONFIG_32BIT -/* - * User space process size: 2GB. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. - */ -#define TASK_SIZE 0x7fff8000UL -#define STACK_TOP TASK_SIZE - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE ((TASK_SIZE / 3) & ~(PAGE_SIZE)) -#endif - -#ifdef CONFIG_64BIT -/* - * User space process size: 1TB. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. TASK_SIZE - * is limited to 1TB by the R4000 architecture; R10000 and better can - * support 16TB; the architectural reserve for future expansion is - * 8192EB ... - */ -#define TASK_SIZE32 0x7fff8000UL -#define TASK_SIZE 0x10000000000UL -#define STACK_TOP \ - (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE) - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE \ - (test_thread_flag(TIF_32BIT_ADDR) ? \ - PAGE_ALIGN(TASK_SIZE32 / 3) : PAGE_ALIGN(TASK_SIZE / 3)) -#define TASK_SIZE_OF(tsk) \ - (test_tsk_thread_flag(tsk, TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE) -#endif - -#ifdef __KERNEL__ -#define STACK_TOP_MAX TASK_SIZE -#endif - -#define NUM_FPU_REGS 32 - -typedef __u64 fpureg_t; - -/* - * It would be nice to add some more fields for emulator statistics, but there - * are a number of fixed offsets in offset.h and elsewhere that would have to - * be recalculated by hand. So the additional information will be private to - * the FPU emulator for now. See asm-mips/fpu_emulator.h. - */ - -struct mips_fpu_struct { - fpureg_t fpr[NUM_FPU_REGS]; - unsigned int fcr31; -}; - -#define NUM_DSP_REGS 6 - -typedef __u32 dspreg_t; - -struct mips_dsp_state { - dspreg_t dspr[NUM_DSP_REGS]; - unsigned int dspcontrol; -}; - -#define INIT_CPUMASK { \ - {0,} \ -} - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define ARCH_MIN_TASKALIGN 8 - -struct mips_abi; - -/* - * If you change thread_struct remember to change the #defines below too! - */ -struct thread_struct { - /* Saved main processor registers. */ - unsigned long reg16; - unsigned long reg17, reg18, reg19, reg20, reg21, reg22, reg23; - unsigned long reg29, reg30, reg31; - - /* Saved cp0 stuff. */ - unsigned long cp0_status; - - /* Saved fpu/fpu emulator stuff. */ - struct mips_fpu_struct fpu; -#ifdef CONFIG_MIPS_MT_FPAFF - /* Emulated instruction count */ - unsigned long emulated_fp; - /* Saved per-thread scheduler affinity mask */ - cpumask_t user_cpus_allowed; -#endif /* CONFIG_MIPS_MT_FPAFF */ - - /* Saved state of the DSP ASE, if available. */ - struct mips_dsp_state dsp; - - /* Other stuff associated with the thread. */ - unsigned long cp0_badvaddr; /* Last user fault */ - unsigned long cp0_baduaddr; /* Last kernel fault accessing USEG */ - unsigned long error_code; - unsigned long trap_no; - unsigned long irix_trampoline; /* Wheee... */ - unsigned long irix_oldctx; - struct mips_abi *abi; -}; - -#ifdef CONFIG_MIPS_MT_FPAFF -#define FPAFF_INIT \ - .emulated_fp = 0, \ - .user_cpus_allowed = INIT_CPUMASK, -#else -#define FPAFF_INIT -#endif /* CONFIG_MIPS_MT_FPAFF */ - -#define INIT_THREAD { \ - /* \ - * Saved main processor registers \ - */ \ - .reg16 = 0, \ - .reg17 = 0, \ - .reg18 = 0, \ - .reg19 = 0, \ - .reg20 = 0, \ - .reg21 = 0, \ - .reg22 = 0, \ - .reg23 = 0, \ - .reg29 = 0, \ - .reg30 = 0, \ - .reg31 = 0, \ - /* \ - * Saved cp0 stuff \ - */ \ - .cp0_status = 0, \ - /* \ - * Saved FPU/FPU emulator stuff \ - */ \ - .fpu = { \ - .fpr = {0,}, \ - .fcr31 = 0, \ - }, \ - /* \ - * FPU affinity state (null if not FPAFF) \ - */ \ - FPAFF_INIT \ - /* \ - * Saved DSP stuff \ - */ \ - .dsp = { \ - .dspr = {0, }, \ - .dspcontrol = 0, \ - }, \ - /* \ - * Other stuff associated with the process \ - */ \ - .cp0_badvaddr = 0, \ - .cp0_baduaddr = 0, \ - .error_code = 0, \ - .trap_no = 0, \ - .irix_trampoline = 0, \ - .irix_oldctx = 0, \ -} - -struct task_struct; - -/* Free all resources held by a thread. */ -#define release_thread(thread) do { } while(0) - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -extern unsigned long thread_saved_pc(struct task_struct *tsk); - -/* - * Do necessary setup to start up a newly executed thread. - */ -extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp); - -unsigned long get_wchan(struct task_struct *p); - -#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32) -#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk) - 1) -#define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc) -#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29]) -#define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status) - -#define cpu_relax() barrier() - -/* - * Return_address is a replacement for __builtin_return_address(count) - * which on certain architectures cannot reasonably be implemented in GCC - * (MIPS, Alpha) or is unuseable with -fomit-frame-pointer (i386). - * Note that __builtin_return_address(x>=1) is forbidden because GCC - * aborts compilation on some CPUs. It's simply not possible to unwind - * some CPU's stackframes. - * - * __builtin_return_address works only for non-leaf functions. We avoid the - * overhead of a function call by forcing the compiler to save the return - * address register on the stack. - */ -#define return_address() ({__asm__ __volatile__("":::"$31");__builtin_return_address(0);}) - -#ifdef CONFIG_CPU_HAS_PREFETCH - -#define ARCH_HAS_PREFETCH - -static inline void prefetch(const void *addr) -{ - __asm__ __volatile__( - " .set mips4 \n" - " pref %0, (%1) \n" - " .set mips0 \n" - : - : "i" (Pref_Load), "r" (addr)); -} - -#endif - -#endif /* _ASM_PROCESSOR_H */ diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h deleted file mode 100644 index c00cca24dae0..000000000000 --- a/include/asm-mips/ptrace.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_PTRACE_H -#define _ASM_PTRACE_H - -#ifdef CONFIG_64BIT -#define __ARCH_WANT_COMPAT_SYS_PTRACE -#endif - -/* 0 - 31 are integer registers, 32 - 63 are fp registers. */ -#define FPR_BASE 32 -#define PC 64 -#define CAUSE 65 -#define BADVADDR 66 -#define MMHI 67 -#define MMLO 68 -#define FPC_CSR 69 -#define FPC_EIR 70 -#define DSP_BASE 71 /* 3 more hi / lo register pairs */ -#define DSP_CONTROL 77 -#define ACX 78 - -/* - * This struct defines the way the registers are stored on the stack during a - * system call/exception. As usual the registers k0/k1 aren't being saved. - */ -struct pt_regs { -#ifdef CONFIG_32BIT - /* Pad bytes for argument save space on the stack. */ - unsigned long pad0[6]; -#endif - - /* Saved main processor registers. */ - unsigned long regs[32]; - - /* Saved special registers. */ - unsigned long cp0_status; - unsigned long hi; - unsigned long lo; -#ifdef CONFIG_CPU_HAS_SMARTMIPS - unsigned long acx; -#endif - unsigned long cp0_badvaddr; - unsigned long cp0_cause; - unsigned long cp0_epc; -#ifdef CONFIG_MIPS_MT_SMTC - unsigned long cp0_tcstatus; -#endif /* CONFIG_MIPS_MT_SMTC */ -} __attribute__ ((aligned (8))); - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 -/* #define PTRACE_GETFPXREGS 18 */ -/* #define PTRACE_SETFPXREGS 19 */ - -#define PTRACE_OLDSETOPTIONS 21 - -#define PTRACE_GET_THREAD_AREA 25 -#define PTRACE_SET_THREAD_AREA 26 - -/* Calls to trace a 64bit program from a 32bit program. */ -#define PTRACE_PEEKTEXT_3264 0xc0 -#define PTRACE_PEEKDATA_3264 0xc1 -#define PTRACE_POKETEXT_3264 0xc2 -#define PTRACE_POKEDATA_3264 0xc3 -#define PTRACE_GET_THREAD_AREA_3264 0xc4 - -#ifdef __KERNEL__ - -#include -#include - -/* - * Does the process account for user or for system time? - */ -#define user_mode(regs) (((regs)->cp0_status & KU_MASK) == KU_USER) - -#define instruction_pointer(regs) ((regs)->cp0_epc) -#define profile_pc(regs) instruction_pointer(regs) - -extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit); - -extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET; - -static inline void die_if_kernel(const char *str, const struct pt_regs *regs) -{ - if (unlikely(!user_mode(regs))) - die(str, regs); -} - -#endif - -#endif /* _ASM_PTRACE_H */ diff --git a/include/asm-mips/r4k-timer.h b/include/asm-mips/r4k-timer.h deleted file mode 100644 index a37d12b3b61c..000000000000 --- a/include/asm-mips/r4k-timer.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 by Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_R4K_TYPES_H -#define __ASM_R4K_TYPES_H - -#include - -#ifdef CONFIG_SYNC_R4K - -extern void synchronise_count_master(void); -extern void synchronise_count_slave(void); - -#else - -static inline void synchronise_count_master(void) -{ -} - -static inline void synchronise_count_slave(void) -{ -} - -#endif - -#endif /* __ASM_R4K_TYPES_H */ diff --git a/include/asm-mips/r4kcache.h b/include/asm-mips/r4kcache.h deleted file mode 100644 index 4c140db36786..000000000000 --- a/include/asm-mips/r4kcache.h +++ /dev/null @@ -1,443 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Inline assembly cache operations. - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - * Copyright (C) 1997 - 2002 Ralf Baechle (ralf@gnu.org) - * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef _ASM_R4KCACHE_H -#define _ASM_R4KCACHE_H - -#include -#include -#include -#include - -/* - * This macro return a properly sign-extended address suitable as base address - * for indexed cache operations. Two issues here: - * - * - The MIPS32 and MIPS64 specs permit an implementation to directly derive - * the index bits from the virtual address. This breaks with tradition - * set by the R4000. To keep unpleasant surprises from happening we pick - * an address in KSEG0 / CKSEG0. - * - We need a properly sign extended address for 64-bit code. To get away - * without ifdefs we let the compiler do it by a type cast. - */ -#define INDEX_BASE CKSEG0 - -#define cache_op(op,addr) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3\n\t \n" \ - " cache %0, %1 \n" \ - " .set pop \n" \ - : \ - : "i" (op), "R" (*(unsigned char *)(addr))) - -#ifdef CONFIG_MIPS_MT -/* - * Temporary hacks for SMTC debug. Optionally force single-threaded - * execution during I-cache flushes. - */ - -#define PROTECT_CACHE_FLUSHES 1 - -#ifdef PROTECT_CACHE_FLUSHES - -extern int mt_protiflush; -extern int mt_protdflush; -extern void mt_cflush_lockdown(void); -extern void mt_cflush_release(void); - -#define BEGIN_MT_IPROT \ - unsigned long flags = 0; \ - unsigned long mtflags = 0; \ - if(mt_protiflush) { \ - local_irq_save(flags); \ - ehb(); \ - mtflags = dvpe(); \ - mt_cflush_lockdown(); \ - } - -#define END_MT_IPROT \ - if(mt_protiflush) { \ - mt_cflush_release(); \ - evpe(mtflags); \ - local_irq_restore(flags); \ - } - -#define BEGIN_MT_DPROT \ - unsigned long flags = 0; \ - unsigned long mtflags = 0; \ - if(mt_protdflush) { \ - local_irq_save(flags); \ - ehb(); \ - mtflags = dvpe(); \ - mt_cflush_lockdown(); \ - } - -#define END_MT_DPROT \ - if(mt_protdflush) { \ - mt_cflush_release(); \ - evpe(mtflags); \ - local_irq_restore(flags); \ - } - -#else - -#define BEGIN_MT_IPROT -#define BEGIN_MT_DPROT -#define END_MT_IPROT -#define END_MT_DPROT - -#endif /* PROTECT_CACHE_FLUSHES */ - -#define __iflush_prologue \ - unsigned long redundance; \ - extern int mt_n_iflushes; \ - BEGIN_MT_IPROT \ - for (redundance = 0; redundance < mt_n_iflushes; redundance++) { - -#define __iflush_epilogue \ - END_MT_IPROT \ - } - -#define __dflush_prologue \ - unsigned long redundance; \ - extern int mt_n_dflushes; \ - BEGIN_MT_DPROT \ - for (redundance = 0; redundance < mt_n_dflushes; redundance++) { - -#define __dflush_epilogue \ - END_MT_DPROT \ - } - -#define __inv_dflush_prologue __dflush_prologue -#define __inv_dflush_epilogue __dflush_epilogue -#define __sflush_prologue { -#define __sflush_epilogue } -#define __inv_sflush_prologue __sflush_prologue -#define __inv_sflush_epilogue __sflush_epilogue - -#else /* CONFIG_MIPS_MT */ - -#define __iflush_prologue { -#define __iflush_epilogue } -#define __dflush_prologue { -#define __dflush_epilogue } -#define __inv_dflush_prologue { -#define __inv_dflush_epilogue } -#define __sflush_prologue { -#define __sflush_epilogue } -#define __inv_sflush_prologue { -#define __inv_sflush_epilogue } - -#endif /* CONFIG_MIPS_MT */ - -static inline void flush_icache_line_indexed(unsigned long addr) -{ - __iflush_prologue - cache_op(Index_Invalidate_I, addr); - __iflush_epilogue -} - -static inline void flush_dcache_line_indexed(unsigned long addr) -{ - __dflush_prologue - cache_op(Index_Writeback_Inv_D, addr); - __dflush_epilogue -} - -static inline void flush_scache_line_indexed(unsigned long addr) -{ - cache_op(Index_Writeback_Inv_SD, addr); -} - -static inline void flush_icache_line(unsigned long addr) -{ - __iflush_prologue - cache_op(Hit_Invalidate_I, addr); - __iflush_epilogue -} - -static inline void flush_dcache_line(unsigned long addr) -{ - __dflush_prologue - cache_op(Hit_Writeback_Inv_D, addr); - __dflush_epilogue -} - -static inline void invalidate_dcache_line(unsigned long addr) -{ - __dflush_prologue - cache_op(Hit_Invalidate_D, addr); - __dflush_epilogue -} - -static inline void invalidate_scache_line(unsigned long addr) -{ - cache_op(Hit_Invalidate_SD, addr); -} - -static inline void flush_scache_line(unsigned long addr) -{ - cache_op(Hit_Writeback_Inv_SD, addr); -} - -#define protected_cache_op(op,addr) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - "1: cache %0, (%1) \n" \ - "2: .set pop \n" \ - " .section __ex_table,\"a\" \n" \ - " "STR(PTR)" 1b, 2b \n" \ - " .previous" \ - : \ - : "i" (op), "r" (addr)) - -/* - * The next two are for badland addresses like signal trampolines. - */ -static inline void protected_flush_icache_line(unsigned long addr) -{ - protected_cache_op(Hit_Invalidate_I, addr); -} - -/* - * R10000 / R12000 hazard - these processors don't support the Hit_Writeback_D - * cacheop so we use Hit_Writeback_Inv_D which is supported by all R4000-style - * caches. We're talking about one cacheline unnecessarily getting invalidated - * here so the penalty isn't overly hard. - */ -static inline void protected_writeback_dcache_line(unsigned long addr) -{ - protected_cache_op(Hit_Writeback_Inv_D, addr); -} - -static inline void protected_writeback_scache_line(unsigned long addr) -{ - protected_cache_op(Hit_Writeback_Inv_SD, addr); -} - -/* - * This one is RM7000-specific - */ -static inline void invalidate_tcache_page(unsigned long addr) -{ - cache_op(Page_Invalidate_T, addr); -} - -#define cache16_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - " cache %1, 0x000(%0); cache %1, 0x010(%0) \n" \ - " cache %1, 0x020(%0); cache %1, 0x030(%0) \n" \ - " cache %1, 0x040(%0); cache %1, 0x050(%0) \n" \ - " cache %1, 0x060(%0); cache %1, 0x070(%0) \n" \ - " cache %1, 0x080(%0); cache %1, 0x090(%0) \n" \ - " cache %1, 0x0a0(%0); cache %1, 0x0b0(%0) \n" \ - " cache %1, 0x0c0(%0); cache %1, 0x0d0(%0) \n" \ - " cache %1, 0x0e0(%0); cache %1, 0x0f0(%0) \n" \ - " cache %1, 0x100(%0); cache %1, 0x110(%0) \n" \ - " cache %1, 0x120(%0); cache %1, 0x130(%0) \n" \ - " cache %1, 0x140(%0); cache %1, 0x150(%0) \n" \ - " cache %1, 0x160(%0); cache %1, 0x170(%0) \n" \ - " cache %1, 0x180(%0); cache %1, 0x190(%0) \n" \ - " cache %1, 0x1a0(%0); cache %1, 0x1b0(%0) \n" \ - " cache %1, 0x1c0(%0); cache %1, 0x1d0(%0) \n" \ - " cache %1, 0x1e0(%0); cache %1, 0x1f0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache32_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - " cache %1, 0x000(%0); cache %1, 0x020(%0) \n" \ - " cache %1, 0x040(%0); cache %1, 0x060(%0) \n" \ - " cache %1, 0x080(%0); cache %1, 0x0a0(%0) \n" \ - " cache %1, 0x0c0(%0); cache %1, 0x0e0(%0) \n" \ - " cache %1, 0x100(%0); cache %1, 0x120(%0) \n" \ - " cache %1, 0x140(%0); cache %1, 0x160(%0) \n" \ - " cache %1, 0x180(%0); cache %1, 0x1a0(%0) \n" \ - " cache %1, 0x1c0(%0); cache %1, 0x1e0(%0) \n" \ - " cache %1, 0x200(%0); cache %1, 0x220(%0) \n" \ - " cache %1, 0x240(%0); cache %1, 0x260(%0) \n" \ - " cache %1, 0x280(%0); cache %1, 0x2a0(%0) \n" \ - " cache %1, 0x2c0(%0); cache %1, 0x2e0(%0) \n" \ - " cache %1, 0x300(%0); cache %1, 0x320(%0) \n" \ - " cache %1, 0x340(%0); cache %1, 0x360(%0) \n" \ - " cache %1, 0x380(%0); cache %1, 0x3a0(%0) \n" \ - " cache %1, 0x3c0(%0); cache %1, 0x3e0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache64_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - " cache %1, 0x000(%0); cache %1, 0x040(%0) \n" \ - " cache %1, 0x080(%0); cache %1, 0x0c0(%0) \n" \ - " cache %1, 0x100(%0); cache %1, 0x140(%0) \n" \ - " cache %1, 0x180(%0); cache %1, 0x1c0(%0) \n" \ - " cache %1, 0x200(%0); cache %1, 0x240(%0) \n" \ - " cache %1, 0x280(%0); cache %1, 0x2c0(%0) \n" \ - " cache %1, 0x300(%0); cache %1, 0x340(%0) \n" \ - " cache %1, 0x380(%0); cache %1, 0x3c0(%0) \n" \ - " cache %1, 0x400(%0); cache %1, 0x440(%0) \n" \ - " cache %1, 0x480(%0); cache %1, 0x4c0(%0) \n" \ - " cache %1, 0x500(%0); cache %1, 0x540(%0) \n" \ - " cache %1, 0x580(%0); cache %1, 0x5c0(%0) \n" \ - " cache %1, 0x600(%0); cache %1, 0x640(%0) \n" \ - " cache %1, 0x680(%0); cache %1, 0x6c0(%0) \n" \ - " cache %1, 0x700(%0); cache %1, 0x740(%0) \n" \ - " cache %1, 0x780(%0); cache %1, 0x7c0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache128_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - " cache %1, 0x000(%0); cache %1, 0x080(%0) \n" \ - " cache %1, 0x100(%0); cache %1, 0x180(%0) \n" \ - " cache %1, 0x200(%0); cache %1, 0x280(%0) \n" \ - " cache %1, 0x300(%0); cache %1, 0x380(%0) \n" \ - " cache %1, 0x400(%0); cache %1, 0x480(%0) \n" \ - " cache %1, 0x500(%0); cache %1, 0x580(%0) \n" \ - " cache %1, 0x600(%0); cache %1, 0x680(%0) \n" \ - " cache %1, 0x700(%0); cache %1, 0x780(%0) \n" \ - " cache %1, 0x800(%0); cache %1, 0x880(%0) \n" \ - " cache %1, 0x900(%0); cache %1, 0x980(%0) \n" \ - " cache %1, 0xa00(%0); cache %1, 0xa80(%0) \n" \ - " cache %1, 0xb00(%0); cache %1, 0xb80(%0) \n" \ - " cache %1, 0xc00(%0); cache %1, 0xc80(%0) \n" \ - " cache %1, 0xd00(%0); cache %1, 0xd80(%0) \n" \ - " cache %1, 0xe00(%0); cache %1, 0xe80(%0) \n" \ - " cache %1, 0xf00(%0); cache %1, 0xf80(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ -#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \ -static inline void blast_##pfx##cache##lsize(void) \ -{ \ - unsigned long start = INDEX_BASE; \ - unsigned long end = start + current_cpu_data.desc.waysize; \ - unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \ - unsigned long ws_end = current_cpu_data.desc.ways << \ - current_cpu_data.desc.waybit; \ - unsigned long ws, addr; \ - \ - __##pfx##flush_prologue \ - \ - for (ws = 0; ws < ws_end; ws += ws_inc) \ - for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws, indexop); \ - \ - __##pfx##flush_epilogue \ -} \ - \ -static inline void blast_##pfx##cache##lsize##_page(unsigned long page) \ -{ \ - unsigned long start = page; \ - unsigned long end = page + PAGE_SIZE; \ - \ - __##pfx##flush_prologue \ - \ - do { \ - cache##lsize##_unroll32(start, hitop); \ - start += lsize * 32; \ - } while (start < end); \ - \ - __##pfx##flush_epilogue \ -} \ - \ -static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \ -{ \ - unsigned long indexmask = current_cpu_data.desc.waysize - 1; \ - unsigned long start = INDEX_BASE + (page & indexmask); \ - unsigned long end = start + PAGE_SIZE; \ - unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \ - unsigned long ws_end = current_cpu_data.desc.ways << \ - current_cpu_data.desc.waybit; \ - unsigned long ws, addr; \ - \ - __##pfx##flush_prologue \ - \ - for (ws = 0; ws < ws_end; ws += ws_inc) \ - for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws, indexop); \ - \ - __##pfx##flush_epilogue \ -} - -__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16) -__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16) -__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) -__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32) -__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32) -__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32) -__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) -__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64) -__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128) - -__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16) -__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32) -__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16) -__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32) -__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64) -__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128) - -/* build blast_xxx_range, protected_blast_xxx_range */ -#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \ -static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ - unsigned long end) \ -{ \ - unsigned long lsize = cpu_##desc##_line_size(); \ - unsigned long addr = start & ~(lsize - 1); \ - unsigned long aend = (end - 1) & ~(lsize - 1); \ - \ - __##pfx##flush_prologue \ - \ - while (1) { \ - prot##cache_op(hitop, addr); \ - if (addr == aend) \ - break; \ - addr += lsize; \ - } \ - \ - __##pfx##flush_epilogue \ -} - -__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_) -__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_) -__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_) -__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, ) -__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, ) -/* blast_inv_dcache_range */ -__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, ) -__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, ) - -#endif /* _ASM_R4KCACHE_H */ diff --git a/include/asm-mips/reboot.h b/include/asm-mips/reboot.h deleted file mode 100644 index e48c0bfab257..000000000000 --- a/include/asm-mips/reboot.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1997, 1999, 2001, 06 by Ralf Baechle - * Copyright (C) 2001 MIPS Technologies, Inc. - */ -#ifndef _ASM_REBOOT_H -#define _ASM_REBOOT_H - -extern void (*_machine_restart)(char *command); -extern void (*_machine_halt)(void); - -#endif /* _ASM_REBOOT_H */ diff --git a/include/asm-mips/reg.h b/include/asm-mips/reg.h deleted file mode 100644 index 634b55d7e7f6..000000000000 --- a/include/asm-mips/reg.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Various register offset definitions for debuggers, core file - * examiners and whatnot. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1999 Ralf Baechle - * Copyright (C) 1995, 1999 Silicon Graphics - */ -#ifndef __ASM_MIPS_REG_H -#define __ASM_MIPS_REG_H - - -#if defined(CONFIG_32BIT) || defined(WANT_COMPAT_REG_H) - -#define EF_R0 6 -#define EF_R1 7 -#define EF_R2 8 -#define EF_R3 9 -#define EF_R4 10 -#define EF_R5 11 -#define EF_R6 12 -#define EF_R7 13 -#define EF_R8 14 -#define EF_R9 15 -#define EF_R10 16 -#define EF_R11 17 -#define EF_R12 18 -#define EF_R13 19 -#define EF_R14 20 -#define EF_R15 21 -#define EF_R16 22 -#define EF_R17 23 -#define EF_R18 24 -#define EF_R19 25 -#define EF_R20 26 -#define EF_R21 27 -#define EF_R22 28 -#define EF_R23 29 -#define EF_R24 30 -#define EF_R25 31 - -/* - * k0/k1 unsaved - */ -#define EF_R26 32 -#define EF_R27 33 - -#define EF_R28 34 -#define EF_R29 35 -#define EF_R30 36 -#define EF_R31 37 - -/* - * Saved special registers - */ -#define EF_LO 38 -#define EF_HI 39 - -#define EF_CP0_EPC 40 -#define EF_CP0_BADVADDR 41 -#define EF_CP0_STATUS 42 -#define EF_CP0_CAUSE 43 -#define EF_UNUSED0 44 - -#define EF_SIZE 180 - -#endif - -#ifdef CONFIG_64BIT - -#define EF_R0 0 -#define EF_R1 1 -#define EF_R2 2 -#define EF_R3 3 -#define EF_R4 4 -#define EF_R5 5 -#define EF_R6 6 -#define EF_R7 7 -#define EF_R8 8 -#define EF_R9 9 -#define EF_R10 10 -#define EF_R11 11 -#define EF_R12 12 -#define EF_R13 13 -#define EF_R14 14 -#define EF_R15 15 -#define EF_R16 16 -#define EF_R17 17 -#define EF_R18 18 -#define EF_R19 19 -#define EF_R20 20 -#define EF_R21 21 -#define EF_R22 22 -#define EF_R23 23 -#define EF_R24 24 -#define EF_R25 25 - -/* - * k0/k1 unsaved - */ -#define EF_R26 26 -#define EF_R27 27 - - -#define EF_R28 28 -#define EF_R29 29 -#define EF_R30 30 -#define EF_R31 31 - -/* - * Saved special registers - */ -#define EF_LO 32 -#define EF_HI 33 - -#define EF_CP0_EPC 34 -#define EF_CP0_BADVADDR 35 -#define EF_CP0_STATUS 36 -#define EF_CP0_CAUSE 37 - -#define EF_SIZE 304 /* size in bytes */ - -#endif /* CONFIG_64BIT */ - -#endif /* __ASM_MIPS_REG_H */ diff --git a/include/asm-mips/regdef.h b/include/asm-mips/regdef.h deleted file mode 100644 index 7c8ecb6b9c40..000000000000 --- a/include/asm-mips/regdef.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1985 MIPS Computer Systems, Inc. - * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle - * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_REGDEF_H -#define _ASM_REGDEF_H - -#include - -#if _MIPS_SIM == _MIPS_SIM_ABI32 - -/* - * Symbolic register names for 32 bit ABI - */ -#define zero $0 /* wired zero */ -#define AT $1 /* assembler temp - uppercase because of ".set at" */ -#define v0 $2 /* return value */ -#define v1 $3 -#define a0 $4 /* argument registers */ -#define a1 $5 -#define a2 $6 -#define a3 $7 -#define t0 $8 /* caller saved */ -#define t1 $9 -#define t2 $10 -#define t3 $11 -#define t4 $12 -#define t5 $13 -#define t6 $14 -#define t7 $15 -#define s0 $16 /* callee saved */ -#define s1 $17 -#define s2 $18 -#define s3 $19 -#define s4 $20 -#define s5 $21 -#define s6 $22 -#define s7 $23 -#define t8 $24 /* caller saved */ -#define t9 $25 -#define jp $25 /* PIC jump register */ -#define k0 $26 /* kernel scratch */ -#define k1 $27 -#define gp $28 /* global pointer */ -#define sp $29 /* stack pointer */ -#define fp $30 /* frame pointer */ -#define s8 $30 /* same like fp! */ -#define ra $31 /* return address */ - -#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ - -#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 - -#define zero $0 /* wired zero */ -#define AT $at /* assembler temp - uppercase because of ".set at" */ -#define v0 $2 /* return value - caller saved */ -#define v1 $3 -#define a0 $4 /* argument registers */ -#define a1 $5 -#define a2 $6 -#define a3 $7 -#define a4 $8 /* arg reg 64 bit; caller saved in 32 bit */ -#define ta0 $8 -#define a5 $9 -#define ta1 $9 -#define a6 $10 -#define ta2 $10 -#define a7 $11 -#define ta3 $11 -#define t0 $12 /* caller saved */ -#define t1 $13 -#define t2 $14 -#define t3 $15 -#define s0 $16 /* callee saved */ -#define s1 $17 -#define s2 $18 -#define s3 $19 -#define s4 $20 -#define s5 $21 -#define s6 $22 -#define s7 $23 -#define t8 $24 /* caller saved */ -#define t9 $25 /* callee address for PIC/temp */ -#define jp $25 /* PIC jump register */ -#define k0 $26 /* kernel temporary */ -#define k1 $27 -#define gp $28 /* global pointer - caller saved for PIC */ -#define sp $29 /* stack pointer */ -#define fp $30 /* frame pointer */ -#define s8 $30 /* callee saved */ -#define ra $31 /* return address */ - -#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */ - -#endif /* _ASM_REGDEF_H */ diff --git a/include/asm-mips/resource.h b/include/asm-mips/resource.h deleted file mode 100644 index 87cb3085269c..000000000000 --- a/include/asm-mips/resource.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 96, 98, 99, 2000 by Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_RESOURCE_H -#define _ASM_RESOURCE_H - - -/* - * These five resource limit IDs have a MIPS/Linux-specific ordering, - * the rest comes from the generic header: - */ -#define RLIMIT_NOFILE 5 /* max number of open files */ -#define RLIMIT_AS 6 /* address space limit */ -#define RLIMIT_RSS 7 /* max resident set size */ -#define RLIMIT_NPROC 8 /* max number of processes */ -#define RLIMIT_MEMLOCK 9 /* max locked-in-memory address space */ - -/* - * SuS says limits have to be unsigned. - * Which makes a ton more sense anyway, - * but we keep the old value on MIPS32, - * for compatibility: - */ -#ifdef CONFIG_32BIT -# define RLIM_INFINITY 0x7fffffffUL -#endif - -#include - -#endif /* _ASM_RESOURCE_H */ diff --git a/include/asm-mips/rm9k-ocd.h b/include/asm-mips/rm9k-ocd.h deleted file mode 100644 index b0b80d9ecf96..000000000000 --- a/include/asm-mips/rm9k-ocd.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if !defined(_ASM_RM9K_OCD_H) -#define _ASM_RM9K_OCD_H - -#include -#include -#include - -extern volatile void __iomem * const ocd_base; -extern volatile void __iomem * const titan_base; - -#define ocd_addr(__x__) (ocd_base + (__x__)) -#define titan_addr(__x__) (titan_base + (__x__)) -#define scram_addr(__x__) (scram_base + (__x__)) - -/* OCD register access */ -#define ocd_readl(__offs__) __raw_readl(ocd_addr(__offs__)) -#define ocd_readw(__offs__) __raw_readw(ocd_addr(__offs__)) -#define ocd_readb(__offs__) __raw_readb(ocd_addr(__offs__)) -#define ocd_writel(__val__, __offs__) \ - __raw_writel((__val__), ocd_addr(__offs__)) -#define ocd_writew(__val__, __offs__) \ - __raw_writew((__val__), ocd_addr(__offs__)) -#define ocd_writeb(__val__, __offs__) \ - __raw_writeb((__val__), ocd_addr(__offs__)) - -/* TITAN register access - 32 bit-wide only */ -#define titan_readl(__offs__) __raw_readl(titan_addr(__offs__)) -#define titan_writel(__val__, __offs__) \ - __raw_writel((__val__), titan_addr(__offs__)) - -/* Protect access to shared TITAN registers */ -extern spinlock_t titan_lock; -extern int titan_irqflags; -#define lock_titan_regs() spin_lock_irqsave(&titan_lock, titan_irqflags) -#define unlock_titan_regs() spin_unlock_irqrestore(&titan_lock, titan_irqflags) - -#endif /* !defined(_ASM_RM9K_OCD_H) */ diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h deleted file mode 100644 index 4ca3063ed2ce..000000000000 --- a/include/asm-mips/rtlx.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. - * - */ - -#ifndef __ASM_RTLX_H_ -#define __ASM_RTLX_H_ - -#include - -#define LX_NODE_BASE 10 - -#define MIPS_CPU_RTLX_IRQ 0 - -#define RTLX_VERSION 2 -#define RTLX_xID 0x12345600 -#define RTLX_ID (RTLX_xID | RTLX_VERSION) -#define RTLX_CHANNELS 8 - -#define RTLX_CHANNEL_STDIO 0 -#define RTLX_CHANNEL_DBG 1 -#define RTLX_CHANNEL_SYSIO 2 - -extern int rtlx_open(int index, int can_sleep); -extern int rtlx_release(int index); -extern ssize_t rtlx_read(int index, void __user *buff, size_t count); -extern ssize_t rtlx_write(int index, const void __user *buffer, size_t count); -extern unsigned int rtlx_read_poll(int index, int can_sleep); -extern unsigned int rtlx_write_poll(int index); - -enum rtlx_state { - RTLX_STATE_UNUSED = 0, - RTLX_STATE_INITIALISED, - RTLX_STATE_REMOTE_READY, - RTLX_STATE_OPENED -}; - -#define RTLX_BUFFER_SIZE 2048 - -/* each channel supports read and write. - linux (vpe0) reads lx_buffer and writes rt_buffer - SP (vpe1) reads rt_buffer and writes lx_buffer -*/ -struct rtlx_channel { - enum rtlx_state rt_state; - enum rtlx_state lx_state; - - int buffer_size; - - /* read and write indexes per buffer */ - int rt_write, rt_read; - char *rt_buffer; - - int lx_write, lx_read; - char *lx_buffer; -}; - -struct rtlx_info { - unsigned long id; - enum rtlx_state state; - - struct rtlx_channel channel[RTLX_CHANNELS]; -}; - -#endif /* __ASM_RTLX_H_ */ diff --git a/include/asm-mips/scatterlist.h b/include/asm-mips/scatterlist.h deleted file mode 100644 index 83d69fe17c9f..000000000000 --- a/include/asm-mips/scatterlist.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __ASM_SCATTERLIST_H -#define __ASM_SCATTERLIST_H - -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#define ISA_DMA_THRESHOLD (0x00ffffffUL) - -#endif /* __ASM_SCATTERLIST_H */ diff --git a/include/asm-mips/seccomp.h b/include/asm-mips/seccomp.h deleted file mode 100644 index 36ed44070256..000000000000 --- a/include/asm-mips/seccomp.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef __ASM_SECCOMP_H - -#include -#include - -#define __NR_seccomp_read __NR_read -#define __NR_seccomp_write __NR_write -#define __NR_seccomp_exit __NR_exit -#define __NR_seccomp_sigreturn __NR_rt_sigreturn - -/* - * Kludge alert: - * - * The generic seccomp code currently allows only a single compat ABI. Until - * this is fixed we priorize O32 as the compat ABI over N32. - */ -#ifdef CONFIG_MIPS32_O32 - -#define TIF_32BIT TIF_32BIT_REGS - -#define __NR_seccomp_read_32 4003 -#define __NR_seccomp_write_32 4004 -#define __NR_seccomp_exit_32 4001 -#define __NR_seccomp_sigreturn_32 4193 /* rt_sigreturn */ - -#elif defined(CONFIG_MIPS32_N32) - -#define TIF_32BIT _TIF_32BIT_ADDR - -#define __NR_seccomp_read_32 6000 -#define __NR_seccomp_write_32 6001 -#define __NR_seccomp_exit_32 6058 -#define __NR_seccomp_sigreturn_32 6211 /* rt_sigreturn */ - -#endif /* CONFIG_MIPS32_O32 */ - -#endif /* __ASM_SECCOMP_H */ diff --git a/include/asm-mips/sections.h b/include/asm-mips/sections.h deleted file mode 100644 index b7e37262c246..000000000000 --- a/include/asm-mips/sections.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_SECTIONS_H -#define _ASM_SECTIONS_H - -#include - -#endif /* _ASM_SECTIONS_H */ diff --git a/include/asm-mips/segment.h b/include/asm-mips/segment.h deleted file mode 100644 index 92ac001fc483..000000000000 --- a/include/asm-mips/segment.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_SEGMENT_H -#define _ASM_SEGMENT_H - -/* Only here because we have some old header files that expect it.. */ - -#endif /* _ASM_SEGMENT_H */ diff --git a/include/asm-mips/sembuf.h b/include/asm-mips/sembuf.h deleted file mode 100644 index 7281a4decaa0..000000000000 --- a/include/asm-mips/sembuf.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_SEMBUF_H -#define _ASM_SEMBUF_H - -/* - * The semid64_ds structure for the MIPS architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 2 miscellaneous 64-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - __kernel_time_t sem_ctime; /* last change time */ - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _ASM_SEMBUF_H */ diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h deleted file mode 100644 index c07ebd8eb9e7..000000000000 --- a/include/asm-mips/serial.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_SERIAL_H -#define _ASM_SERIAL_H - - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD (1843200 / 16) - -#endif /* _ASM_SERIAL_H */ diff --git a/include/asm-mips/setup.h b/include/asm-mips/setup.h deleted file mode 100644 index e600cedda976..000000000000 --- a/include/asm-mips/setup.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _MIPS_SETUP_H -#define _MIPS_SETUP_H - -#define COMMAND_LINE_SIZE 256 - -#ifdef __KERNEL__ -extern void setup_early_printk(void); -#endif /* __KERNEL__ */ - -#endif /* __SETUP_H */ diff --git a/include/asm-mips/sgi/gio.h b/include/asm-mips/sgi/gio.h deleted file mode 100644 index 889cf028c95d..000000000000 --- a/include/asm-mips/sgi/gio.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * gio.h: Definitions for SGI GIO bus - * - * Copyright (C) 2002 Ladislav Michl - */ - -#ifndef _SGI_GIO_H -#define _SGI_GIO_H - -/* - * GIO bus addresses - * - * The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have - * three physical connectors, but only two slots, GFX and EXP0. - * - * There is 10MB of GIO address space for GIO64 slot devices - * slot# slot type address range size - * ----- --------- ----------------------- ----- - * 0 GFX 0x1f000000 - 0x1f3fffff 4MB - * 1 EXP0 0x1f400000 - 0x1f5fffff 2MB - * 2 EXP1 0x1f600000 - 0x1f9fffff 4MB - * - * There are un-slotted devices, HPC, I/O and misc devices, which are grouped - * into the HPC address space. - * - MISC 0x1fb00000 - 0x1fbfffff 1MB - * - * Following space is reserved and unused - * - RESERVED 0x18000000 - 0x1effffff 112MB - * - * GIO bus IDs - * - * Each GIO bus device identifies itself to the system by answering a - * read with an "ID" value. IDs are either 8 or 32 bits long. IDs less - * than 128 are 8 bits long, with the most significant 24 bits read from - * the slot undefined. - * - * 32-bit IDs are divided into - * bits 0:6 the product ID; ranges from 0x00 to 0x7F. - * bit 7 0=GIO Product ID is 8 bits wide - * 1=GIO Product ID is 32 bits wide. - * bits 8:15 manufacturer version for the product. - * bit 16 0=GIO32 and GIO32-bis, 1=GIO64. - * bit 17 0=no ROM present - * 1=ROM present on this board AND next three words - * space define the ROM. - * bits 18:31 up to manufacturer. - * - * IDs above 0x50/0xd0 are of 3rd party boards. - * - * 8-bit IDs - * 0x01 XPI low cost FDDI - * 0x02 GTR TokenRing - * 0x04 Synchronous ISDN - * 0x05 ATM board [*] - * 0x06 Canon Interface - * 0x07 16 bit SCSI Card [*] - * 0x08 JPEG (Double Wide) - * 0x09 JPEG (Single Wide) - * 0x0a XPI mez. FDDI device 0 - * 0x0b XPI mez. FDDI device 1 - * 0x0c SMPTE 259M Video [*] - * 0x0d Babblefish Compression [*] - * 0x0e E-Plex 8-port Ethernet - * 0x30 Lyon Lamb IVAS - * 0xb8 GIO 100BaseTX Fast Ethernet (gfe) - * - * [*] Device provide 32-bit ID. - * - */ - -#define GIO_ID(x) (x & 0x7f) -#define GIO_32BIT_ID 0x80 -#define GIO_REV(x) ((x >> 8) & 0xff) -#define GIO_64BIT_IFACE 0x10000 -#define GIO_ROM_PRESENT 0x20000 -#define GIO_VENDOR_CODE(x) ((x >> 18) & 0x3fff) - -#define GIO_SLOT_GFX_BASE 0x1f000000 -#define GIO_SLOT_EXP0_BASE 0x1f400000 -#define GIO_SLOT_EXP1_BASE 0x1f600000 - -#endif /* _SGI_GIO_H */ diff --git a/include/asm-mips/sgi/hpc3.h b/include/asm-mips/sgi/hpc3.h deleted file mode 100644 index c4729f531919..000000000000 --- a/include/asm-mips/sgi/hpc3.h +++ /dev/null @@ -1,317 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * hpc3.h: Definitions for SGI HPC3 controller - * - * Copyright (C) 1996 David S. Miller - * Copyright (C) 1998 Ralf Baechle - */ - -#ifndef _SGI_HPC3_H -#define _SGI_HPC3_H - -#include -#include - -/* An HPC DMA descriptor. */ -struct hpc_dma_desc { - u32 pbuf; /* physical address of data buffer */ - u32 cntinfo; /* counter and info bits */ -#define HPCDMA_EOX 0x80000000 /* last desc in chain for tx */ -#define HPCDMA_EOR 0x80000000 /* last desc in chain for rx */ -#define HPCDMA_EOXP 0x40000000 /* end of packet for tx */ -#define HPCDMA_EORP 0x40000000 /* end of packet for rx */ -#define HPCDMA_XIE 0x20000000 /* irq generated when at end of this desc */ -#define HPCDMA_XIU 0x01000000 /* Tx buffer in use by CPU. */ -#define HPCDMA_EIPC 0x00ff0000 /* SEEQ ethernet special xternal bytecount */ -#define HPCDMA_ETXD 0x00008000 /* set to one by HPC when packet tx'd */ -#define HPCDMA_OWN 0x00004000 /* Denotes ring buffer ownership on rx */ -#define HPCDMA_BCNT 0x00003fff /* size in bytes of this dma buffer */ - - u32 pnext; /* paddr of next hpc_dma_desc if any */ -}; - -/* The set of regs for each HPC3 PBUS DMA channel. */ -struct hpc3_pbus_dmacregs { - volatile u32 pbdma_bptr; /* pbus dma channel buffer ptr */ - volatile u32 pbdma_dptr; /* pbus dma channel desc ptr */ - u32 _unused0[0x1000/4 - 2]; /* padding */ - volatile u32 pbdma_ctrl; /* pbus dma channel control register has - * copletely different meaning for read - * compared with write */ - /* read */ -#define HPC3_PDMACTRL_INT 0x00000001 /* interrupt (cleared after read) */ -#define HPC3_PDMACTRL_ISACT 0x00000002 /* channel active */ - /* write */ -#define HPC3_PDMACTRL_SEL 0x00000002 /* little endian transfer */ -#define HPC3_PDMACTRL_RCV 0x00000004 /* direction is receive */ -#define HPC3_PDMACTRL_FLSH 0x00000008 /* enable flush for receive DMA */ -#define HPC3_PDMACTRL_ACT 0x00000010 /* start dma transfer */ -#define HPC3_PDMACTRL_LD 0x00000020 /* load enable for ACT */ -#define HPC3_PDMACTRL_RT 0x00000040 /* Use realtime GIO bus servicing */ -#define HPC3_PDMACTRL_HW 0x0000ff00 /* DMA High-water mark */ -#define HPC3_PDMACTRL_FB 0x003f0000 /* Ptr to beginning of fifo */ -#define HPC3_PDMACTRL_FE 0x3f000000 /* Ptr to end of fifo */ - - u32 _unused1[0x1000/4 - 1]; /* padding */ -}; - -/* The HPC3 SCSI registers, this does not include external ones. */ -struct hpc3_scsiregs { - volatile u32 cbptr; /* current dma buffer ptr, diagnostic use only */ - volatile u32 ndptr; /* next dma descriptor ptr */ - u32 _unused0[0x1000/4 - 2]; /* padding */ - volatile u32 bcd; /* byte count info */ -#define HPC3_SBCD_BCNTMSK 0x00003fff /* bytes to transfer from/to memory */ -#define HPC3_SBCD_XIE 0x00004000 /* Send IRQ when done with cur buf */ -#define HPC3_SBCD_EOX 0x00008000 /* Indicates this is last buf in chain */ - - volatile u32 ctrl; /* control register */ -#define HPC3_SCTRL_IRQ 0x01 /* IRQ asserted, either dma done or parity */ -#define HPC3_SCTRL_ENDIAN 0x02 /* DMA endian mode, 0=big 1=little */ -#define HPC3_SCTRL_DIR 0x04 /* DMA direction, 1=dev2mem 0=mem2dev */ -#define HPC3_SCTRL_FLUSH 0x08 /* Tells HPC3 to flush scsi fifos */ -#define HPC3_SCTRL_ACTIVE 0x10 /* SCSI DMA channel is active */ -#define HPC3_SCTRL_AMASK 0x20 /* DMA active inhibits PIO */ -#define HPC3_SCTRL_CRESET 0x40 /* Resets dma channel and external controller */ -#define HPC3_SCTRL_PERR 0x80 /* Bad parity on HPC3 iface to scsi controller */ - - volatile u32 gfptr; /* current GIO fifo ptr */ - volatile u32 dfptr; /* current device fifo ptr */ - volatile u32 dconfig; /* DMA configuration register */ -#define HPC3_SDCFG_HCLK 0x00001 /* Enable DMA half clock mode */ -#define HPC3_SDCFG_D1 0x00006 /* Cycles to spend in D1 state */ -#define HPC3_SDCFG_D2 0x00038 /* Cycles to spend in D2 state */ -#define HPC3_SDCFG_D3 0x001c0 /* Cycles to spend in D3 state */ -#define HPC3_SDCFG_HWAT 0x00e00 /* DMA high water mark */ -#define HPC3_SDCFG_HW 0x01000 /* Enable 16-bit halfword DMA accesses to scsi */ -#define HPC3_SDCFG_SWAP 0x02000 /* Byte swap all DMA accesses */ -#define HPC3_SDCFG_EPAR 0x04000 /* Enable parity checking for DMA */ -#define HPC3_SDCFG_POLL 0x08000 /* hd_dreq polarity control */ -#define HPC3_SDCFG_ERLY 0x30000 /* hd_dreq behavior control bits */ - - volatile u32 pconfig; /* PIO configuration register */ -#define HPC3_SPCFG_P3 0x0003 /* Cycles to spend in P3 state */ -#define HPC3_SPCFG_P2W 0x001c /* Cycles to spend in P2 state for writes */ -#define HPC3_SPCFG_P2R 0x01e0 /* Cycles to spend in P2 state for reads */ -#define HPC3_SPCFG_P1 0x0e00 /* Cycles to spend in P1 state */ -#define HPC3_SPCFG_HW 0x1000 /* Enable 16-bit halfword PIO accesses to scsi */ -#define HPC3_SPCFG_SWAP 0x2000 /* Byte swap all PIO accesses */ -#define HPC3_SPCFG_EPAR 0x4000 /* Enable parity checking for PIO */ -#define HPC3_SPCFG_FUJI 0x8000 /* Fujitsu scsi controller mode for faster dma/pio */ - - u32 _unused1[0x1000/4 - 6]; /* padding */ -}; - -/* SEEQ ethernet HPC3 registers, only one seeq per HPC3. */ -struct hpc3_ethregs { - /* Receiver registers. */ - volatile u32 rx_cbptr; /* current dma buffer ptr, diagnostic use only */ - volatile u32 rx_ndptr; /* next dma descriptor ptr */ - u32 _unused0[0x1000/4 - 2]; /* padding */ - volatile u32 rx_bcd; /* byte count info */ -#define HPC3_ERXBCD_BCNTMSK 0x00003fff /* bytes to be sent to memory */ -#define HPC3_ERXBCD_XIE 0x20000000 /* HPC3 interrupts cpu at end of this buf */ -#define HPC3_ERXBCD_EOX 0x80000000 /* flags this as end of descriptor chain */ - - volatile u32 rx_ctrl; /* control register */ -#define HPC3_ERXCTRL_STAT50 0x0000003f /* Receive status reg bits of Seeq8003 */ -#define HPC3_ERXCTRL_STAT6 0x00000040 /* Rdonly irq status */ -#define HPC3_ERXCTRL_STAT7 0x00000080 /* Rdonlt old/new status bit from Seeq */ -#define HPC3_ERXCTRL_ENDIAN 0x00000100 /* Endian for dma channel, little=1 big=0 */ -#define HPC3_ERXCTRL_ACTIVE 0x00000200 /* Tells if DMA transfer is in progress */ -#define HPC3_ERXCTRL_AMASK 0x00000400 /* Tells if ACTIVE inhibits PIO's to hpc3 */ -#define HPC3_ERXCTRL_RBO 0x00000800 /* Receive buffer overflow if set to 1 */ - - volatile u32 rx_gfptr; /* current GIO fifo ptr */ - volatile u32 rx_dfptr; /* current device fifo ptr */ - u32 _unused1; /* padding */ - volatile u32 reset; /* reset register */ -#define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */ -#define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */ -#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */ - - volatile u32 dconfig; /* DMA configuration register */ -#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */ -#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */ -#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */ -#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */ -#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */ -#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */ -#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */ -#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */ - - volatile u32 pconfig; /* PIO configuration register */ -#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */ -#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */ -#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */ -#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */ - - u32 _unused2[0x1000/4 - 8]; /* padding */ - - /* Transmitter registers. */ - volatile u32 tx_cbptr; /* current dma buffer ptr, diagnostic use only */ - volatile u32 tx_ndptr; /* next dma descriptor ptr */ - u32 _unused3[0x1000/4 - 2]; /* padding */ - volatile u32 tx_bcd; /* byte count info */ -#define HPC3_ETXBCD_BCNTMSK 0x00003fff /* bytes to be read from memory */ -#define HPC3_ETXBCD_ESAMP 0x10000000 /* if set, too late to add descriptor */ -#define HPC3_ETXBCD_XIE 0x20000000 /* Interrupt cpu at end of cur desc */ -#define HPC3_ETXBCD_EOP 0x40000000 /* Last byte of cur buf is end of packet */ -#define HPC3_ETXBCD_EOX 0x80000000 /* This buf is the end of desc chain */ - - volatile u32 tx_ctrl; /* control register */ -#define HPC3_ETXCTRL_STAT30 0x0000000f /* Rdonly copy of seeq tx stat reg */ -#define HPC3_ETXCTRL_STAT4 0x00000010 /* Indicate late collision occurred */ -#define HPC3_ETXCTRL_STAT75 0x000000e0 /* Rdonly irq status from seeq */ -#define HPC3_ETXCTRL_ENDIAN 0x00000100 /* DMA channel endian mode, 1=little 0=big */ -#define HPC3_ETXCTRL_ACTIVE 0x00000200 /* DMA tx channel is active */ -#define HPC3_ETXCTRL_AMASK 0x00000400 /* Indicates ACTIVE inhibits PIO's */ - - volatile u32 tx_gfptr; /* current GIO fifo ptr */ - volatile u32 tx_dfptr; /* current device fifo ptr */ - u32 _unused4[0x1000/4 - 4]; /* padding */ -}; - -struct hpc3_regs { - /* First regs for the PBUS 8 dma channels. */ - struct hpc3_pbus_dmacregs pbdma[8]; - - /* Now the HPC scsi registers, we get two scsi reg sets. */ - struct hpc3_scsiregs scsi_chan0, scsi_chan1; - - /* The SEEQ hpc3 ethernet dma/control registers. */ - struct hpc3_ethregs ethregs; - - /* Here are where the hpc3 fifo's can be directly accessed - * via PIO accesses. Under normal operation we never stick - * our grubby paws in here so it's just padding. */ - u32 _unused0[0x18000/4]; - - /* HPC3 irq status regs. Due to a peculiar bug you need to - * look at two different register addresses to get at all of - * the status bits. The first reg can only reliably report - * bits 4:0 of the status, and the second reg can only - * reliably report bits 9:5 of the hpc3 irq status. I told - * you it was a peculiar bug. ;-) - */ - volatile u32 istat0; /* Irq status, only bits <4:0> reliable. */ -#define HPC3_ISTAT_PBIMASK 0x0ff /* irq bits for pbus devs 0 --> 7 */ -#define HPC3_ISTAT_SC0MASK 0x100 /* irq bit for scsi channel 0 */ -#define HPC3_ISTAT_SC1MASK 0x200 /* irq bit for scsi channel 1 */ - - volatile u32 gio_misc; /* GIO misc control bits. */ -#define HPC3_GIOMISC_ERTIME 0x1 /* Enable external timer real time. */ -#define HPC3_GIOMISC_DENDIAN 0x2 /* dma descriptor endian, 1=lit 0=big */ - - u32 eeprom; /* EEPROM data reg. */ -#define HPC3_EEPROM_EPROT 0x01 /* Protect register enable */ -#define HPC3_EEPROM_CSEL 0x02 /* Chip select */ -#define HPC3_EEPROM_ECLK 0x04 /* EEPROM clock */ -#define HPC3_EEPROM_DATO 0x08 /* Data out */ -#define HPC3_EEPROM_DATI 0x10 /* Data in */ - - volatile u32 istat1; /* Irq status, only bits <9:5> reliable. */ - volatile u32 bestat; /* Bus error interrupt status reg. */ -#define HPC3_BESTAT_BLMASK 0x000ff /* Bus lane where bad parity occurred */ -#define HPC3_BESTAT_CTYPE 0x00100 /* Bus cycle type, 0=PIO 1=DMA */ -#define HPC3_BESTAT_PIDSHIFT 9 -#define HPC3_BESTAT_PIDMASK 0x3f700 /* DMA channel parity identifier */ - - u32 _unused1[0x14000/4 - 5]; /* padding */ - - /* Now direct PIO per-HPC3 peripheral access to external regs. */ - volatile u32 scsi0_ext[256]; /* SCSI channel 0 external regs */ - u32 _unused2[0x7c00/4]; - volatile u32 scsi1_ext[256]; /* SCSI channel 1 external regs */ - u32 _unused3[0x7c00/4]; - volatile u32 eth_ext[320]; /* Ethernet external registers */ - u32 _unused4[0x3b00/4]; - - /* Per-peripheral device external registers and DMA/PIO control. */ - volatile u32 pbus_extregs[16][256]; - volatile u32 pbus_dmacfg[8][128]; - /* Cycles to spend in D3 for reads */ -#define HPC3_DMACFG_D3R_MASK 0x00000001 -#define HPC3_DMACFG_D3R_SHIFT 0 - /* Cycles to spend in D4 for reads */ -#define HPC3_DMACFG_D4R_MASK 0x0000001e -#define HPC3_DMACFG_D4R_SHIFT 1 - /* Cycles to spend in D5 for reads */ -#define HPC3_DMACFG_D5R_MASK 0x000001e0 -#define HPC3_DMACFG_D5R_SHIFT 5 - /* Cycles to spend in D3 for writes */ -#define HPC3_DMACFG_D3W_MASK 0x00000200 -#define HPC3_DMACFG_D3W_SHIFT 9 - /* Cycles to spend in D4 for writes */ -#define HPC3_DMACFG_D4W_MASK 0x00003c00 -#define HPC3_DMACFG_D4W_SHIFT 10 - /* Cycles to spend in D5 for writes */ -#define HPC3_DMACFG_D5W_MASK 0x0003c000 -#define HPC3_DMACFG_D5W_SHIFT 14 - /* Enable 16-bit DMA access mode */ -#define HPC3_DMACFG_DS16 0x00040000 - /* Places halfwords on high 16 bits of bus */ -#define HPC3_DMACFG_EVENHI 0x00080000 - /* Make this device real time */ -#define HPC3_DMACFG_RTIME 0x00200000 - /* 5 bit burst count for DMA device */ -#define HPC3_DMACFG_BURST_MASK 0x07c00000 -#define HPC3_DMACFG_BURST_SHIFT 22 - /* Use live pbus_dreq unsynchronized signal */ -#define HPC3_DMACFG_DRQLIVE 0x08000000 - volatile u32 pbus_piocfg[16][64]; - /* Cycles to spend in P2 state for reads */ -#define HPC3_PIOCFG_P2R_MASK 0x00001 -#define HPC3_PIOCFG_P2R_SHIFT 0 - /* Cycles to spend in P3 state for reads */ -#define HPC3_PIOCFG_P3R_MASK 0x0001e -#define HPC3_PIOCFG_P3R_SHIFT 1 - /* Cycles to spend in P4 state for reads */ -#define HPC3_PIOCFG_P4R_MASK 0x001e0 -#define HPC3_PIOCFG_P4R_SHIFT 5 - /* Cycles to spend in P2 state for writes */ -#define HPC3_PIOCFG_P2W_MASK 0x00200 -#define HPC3_PIOCFG_P2W_SHIFT 9 - /* Cycles to spend in P3 state for writes */ -#define HPC3_PIOCFG_P3W_MASK 0x03c00 -#define HPC3_PIOCFG_P3W_SHIFT 10 - /* Cycles to spend in P4 state for writes */ -#define HPC3_PIOCFG_P4W_MASK 0x3c000 -#define HPC3_PIOCFG_P4W_SHIFT 14 - /* Enable 16-bit PIO accesses */ -#define HPC3_PIOCFG_DS16 0x40000 - /* Place even address bits in bits <15:8> */ -#define HPC3_PIOCFG_EVENHI 0x80000 - - /* PBUS PROM control regs. */ - volatile u32 pbus_promwe; /* PROM write enable register */ -#define HPC3_PROM_WENAB 0x1 /* Enable writes to the PROM */ - - u32 _unused5[0x0800/4 - 1]; - volatile u32 pbus_promswap; /* Chip select swap reg */ -#define HPC3_PROM_SWAP 0x1 /* invert GIO addr bit to select prom0 or prom1 */ - - u32 _unused6[0x0800/4 - 1]; - volatile u32 pbus_gout; /* PROM general purpose output reg */ -#define HPC3_PROM_STAT 0x1 /* General purpose status bit in gout */ - - u32 _unused7[0x1000/4 - 1]; - volatile u32 rtcregs[14]; /* Dallas clock registers */ - u32 _unused8[50]; - volatile u32 bbram[8192-50-14]; /* Battery backed ram */ -}; - -/* - * It is possible to have two HPC3's within the address space on - * one machine, though only having one is more likely on an Indy. - */ -extern struct hpc3_regs *hpc3c0, *hpc3c1; -#define HPC3_CHIP0_BASE 0x1fb80000 /* physical */ -#define HPC3_CHIP1_BASE 0x1fb00000 /* physical */ - -extern void sgihpc_init(void); - -#endif /* _SGI_HPC3_H */ diff --git a/include/asm-mips/sgi/ioc.h b/include/asm-mips/sgi/ioc.h deleted file mode 100644 index 343ed15f8dc4..000000000000 --- a/include/asm-mips/sgi/ioc.h +++ /dev/null @@ -1,200 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * ioc.h: Definitions for SGI I/O Controller - * - * Copyright (C) 1996 David S. Miller - * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle - * Copyright (C) 2001, 2003 Ladislav Michl - */ - -#ifndef _SGI_IOC_H -#define _SGI_IOC_H - -#include -#include - -/* - * All registers are 8-bit wide alligned on 32-bit boundary. Bad things - * happen if you try word access them. You have been warned. - */ - -struct sgioc_uart_regs { - u8 _ctrl1[3]; - volatile u8 ctrl1; - u8 _data1[3]; - volatile u8 data1; - u8 _ctrl2[3]; - volatile u8 ctrl2; - u8 _data2[3]; - volatile u8 data2; -}; - -struct sgioc_keyb_regs { - u8 _data[3]; - volatile u8 data; - u8 _command[3]; - volatile u8 command; -}; - -struct sgint_regs { - u8 _istat0[3]; - volatile u8 istat0; /* Interrupt status zero */ -#define SGINT_ISTAT0_FFULL 0x01 -#define SGINT_ISTAT0_SCSI0 0x02 -#define SGINT_ISTAT0_SCSI1 0x04 -#define SGINT_ISTAT0_ENET 0x08 -#define SGINT_ISTAT0_GFXDMA 0x10 -#define SGINT_ISTAT0_PPORT 0x20 -#define SGINT_ISTAT0_HPC2 0x40 -#define SGINT_ISTAT0_LIO2 0x80 - u8 _imask0[3]; - volatile u8 imask0; /* Interrupt mask zero */ - u8 _istat1[3]; - volatile u8 istat1; /* Interrupt status one */ -#define SGINT_ISTAT1_ISDNI 0x01 -#define SGINT_ISTAT1_PWR 0x02 -#define SGINT_ISTAT1_ISDNH 0x04 -#define SGINT_ISTAT1_LIO3 0x08 -#define SGINT_ISTAT1_HPC3 0x10 -#define SGINT_ISTAT1_AFAIL 0x20 -#define SGINT_ISTAT1_VIDEO 0x40 -#define SGINT_ISTAT1_GIO2 0x80 - u8 _imask1[3]; - volatile u8 imask1; /* Interrupt mask one */ - u8 _vmeistat[3]; - volatile u8 vmeistat; /* VME interrupt status */ - u8 _cmeimask0[3]; - volatile u8 cmeimask0; /* VME interrupt mask zero */ - u8 _cmeimask1[3]; - volatile u8 cmeimask1; /* VME interrupt mask one */ - u8 _cmepol[3]; - volatile u8 cmepol; /* VME polarity */ - u8 _tclear[3]; - volatile u8 tclear; - u8 _errstat[3]; - volatile u8 errstat; /* Error status reg, reserved on INT2 */ - u32 _unused0[2]; - u8 _tcnt0[3]; - volatile u8 tcnt0; /* counter 0 */ - u8 _tcnt1[3]; - volatile u8 tcnt1; /* counter 1 */ - u8 _tcnt2[3]; - volatile u8 tcnt2; /* counter 2 */ - u8 _tcword[3]; - volatile u8 tcword; /* control word */ -#define SGINT_TCWORD_BCD 0x01 /* Use BCD mode for counters */ -#define SGINT_TCWORD_MMASK 0x0e /* Mode bitmask. */ -#define SGINT_TCWORD_MITC 0x00 /* IRQ on terminal count (doesn't work) */ -#define SGINT_TCWORD_MOS 0x02 /* One-shot IRQ mode. */ -#define SGINT_TCWORD_MRGEN 0x04 /* Normal rate generation */ -#define SGINT_TCWORD_MSWGEN 0x06 /* Square wave generator mode */ -#define SGINT_TCWORD_MSWST 0x08 /* Software strobe */ -#define SGINT_TCWORD_MHWST 0x0a /* Hardware strobe */ -#define SGINT_TCWORD_CMASK 0x30 /* Command mask */ -#define SGINT_TCWORD_CLAT 0x00 /* Latch command */ -#define SGINT_TCWORD_CLSB 0x10 /* LSB read/write */ -#define SGINT_TCWORD_CMSB 0x20 /* MSB read/write */ -#define SGINT_TCWORD_CALL 0x30 /* Full counter read/write */ -#define SGINT_TCWORD_CNT0 0x00 /* Select counter zero */ -#define SGINT_TCWORD_CNT1 0x40 /* Select counter one */ -#define SGINT_TCWORD_CNT2 0x80 /* Select counter two */ -#define SGINT_TCWORD_CRBCK 0xc0 /* Readback command */ -}; - -/* - * The timer is the good old 8254. Unlike in PCs it's clocked at exactly 1MHz - */ -#define SGINT_TIMER_CLOCK 1000000 - -/* - * This is the constant we're using for calibrating the counter. - */ -#define SGINT_TCSAMP_COUNTER ((SGINT_TIMER_CLOCK / HZ) + 255) - -/* We need software copies of these because they are write only. */ -extern u8 sgi_ioc_reset, sgi_ioc_write; - -struct sgioc_regs { - struct pi1_regs pport; - u32 _unused0[2]; - struct sgioc_uart_regs uart; - struct sgioc_keyb_regs kbdmouse; - u8 _gcsel[3]; - volatile u8 gcsel; - u8 _genctrl[3]; - volatile u8 genctrl; - u8 _panel[3]; - volatile u8 panel; -#define SGIOC_PANEL_POWERON 0x01 -#define SGIOC_PANEL_POWERINTR 0x02 -#define SGIOC_PANEL_VOLDNINTR 0x10 -#define SGIOC_PANEL_VOLDNHOLD 0x20 -#define SGIOC_PANEL_VOLUPINTR 0x40 -#define SGIOC_PANEL_VOLUPHOLD 0x80 - u32 _unused1; - u8 _sysid[3]; - volatile u8 sysid; -#define SGIOC_SYSID_FULLHOUSE 0x01 -#define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1) -#define SGIOC_SYSID_CHIPREV(x) (((x) & 0xe0) >> 5) - u32 _unused2; - u8 _read[3]; - volatile u8 read; - u32 _unused3; - u8 _dmasel[3]; - volatile u8 dmasel; -#define SGIOC_DMASEL_SCLK10MHZ 0x00 /* use 10MHZ serial clock */ -#define SGIOC_DMASEL_ISDNB 0x01 /* enable isdn B */ -#define SGIOC_DMASEL_ISDNA 0x02 /* enable isdn A */ -#define SGIOC_DMASEL_PPORT 0x04 /* use parallel DMA */ -#define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */ -#define SGIOC_DMASEL_SCLKEXT 0x20 /* use external serial clock */ - u32 _unused4; - u8 _reset[3]; - volatile u8 reset; -#define SGIOC_RESET_PPORT 0x01 /* 0=parport reset, 1=nornal */ -#define SGIOC_RESET_KBDMOUSE 0x02 /* 0=kbdmouse reset, 1=normal */ -#define SGIOC_RESET_EISA 0x04 /* 0=eisa reset, 1=normal */ -#define SGIOC_RESET_ISDN 0x08 /* 0=isdn reset, 1=normal */ -#define SGIOC_RESET_LC0OFF 0x10 /* guiness: turn led off (red, else green) */ -#define SGIOC_RESET_LC1OFF 0x20 /* guiness: turn led off (green, else amber) */ - u32 _unused5; - u8 _write[3]; - volatile u8 write; -#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshhold */ -#define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */ -#define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */ -#define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */ -#define SGIOC_WRITE_U1AMODE 0x10 /* 1=PC 0=MAC UART mode */ -#define SGIOC_WRITE_U0AMODE 0x20 /* 1=PC 0=MAC UART mode */ -#define SGIOC_WRITE_MLO 0x40 /* 1=4.75V 0=+5V */ -#define SGIOC_WRITE_MHI 0x80 /* 1=5.25V 0=+5V */ - u32 _unused6; - struct sgint_regs int3; - u32 _unused7[16]; - volatile u32 extio; /* FullHouse only */ -#define EXTIO_S0_IRQ_3 0x8000 /* S0: vid.vsync */ -#define EXTIO_S0_IRQ_2 0x4000 /* S0: gfx.fifofull */ -#define EXTIO_S0_IRQ_1 0x2000 /* S0: gfx.int */ -#define EXTIO_S0_RETRACE 0x1000 -#define EXTIO_SG_IRQ_3 0x0800 /* SG: vid.vsync */ -#define EXTIO_SG_IRQ_2 0x0400 /* SG: gfx.fifofull */ -#define EXTIO_SG_IRQ_1 0x0200 /* SG: gfx.int */ -#define EXTIO_SG_RETRACE 0x0100 -#define EXTIO_GIO_33MHZ 0x0080 -#define EXTIO_EISA_BUSERR 0x0040 -#define EXTIO_MC_BUSERR 0x0020 -#define EXTIO_HPC3_BUSERR 0x0010 -#define EXTIO_S0_STAT_1 0x0008 -#define EXTIO_S0_STAT_0 0x0004 -#define EXTIO_SG_STAT_1 0x0002 -#define EXTIO_SG_STAT_0 0x0001 -}; - -extern struct sgioc_regs *sgioc; -extern struct sgint_regs *sgint; - -#endif diff --git a/include/asm-mips/sgi/ip22.h b/include/asm-mips/sgi/ip22.h deleted file mode 100644 index c0501f91719b..000000000000 --- a/include/asm-mips/sgi/ip22.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * ip22.h: Definitions for SGI IP22 machines - * - * Copyright (C) 1996 David S. Miller - * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle - */ - -#ifndef _SGI_IP22_H -#define _SGI_IP22_H - -/* - * These are the virtual IRQ numbers, we divide all IRQ's into - * 'spaces', the 'space' determines where and how to enable/disable - * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrupts - * are not supported this way. Driver is supposed to allocate HPC/MC - * interrupt as shareable and then look to proper status bit (see - * HAL2 driver). This will prevent many complications, trust me ;-) - */ - -#include -#include - -#define SGINT_EISA 0 /* 16 EISA irq levels (Indigo2) */ -#define SGINT_CPU MIPS_CPU_IRQ_BASE /* MIPS CPU define 8 interrupt sources */ -#define SGINT_LOCAL0 (SGINT_CPU+8) /* 8 local0 irq levels */ -#define SGINT_LOCAL1 (SGINT_CPU+16) /* 8 local1 irq levels */ -#define SGINT_LOCAL2 (SGINT_CPU+24) /* 8 local2 vectored irq levels */ -#define SGINT_LOCAL3 (SGINT_CPU+32) /* 8 local3 vectored irq levels */ -#define SGINT_END (SGINT_CPU+40) /* End of 'spaces' */ - -/* - * Individual interrupt definitions for the Indy and Indigo2 - */ - -#define SGI_SOFT_0_IRQ SGINT_CPU + 0 -#define SGI_SOFT_1_IRQ SGINT_CPU + 1 -#define SGI_LOCAL_0_IRQ SGINT_CPU + 2 -#define SGI_LOCAL_1_IRQ SGINT_CPU + 3 -#define SGI_8254_0_IRQ SGINT_CPU + 4 -#define SGI_8254_1_IRQ SGINT_CPU + 5 -#define SGI_BUSERR_IRQ SGINT_CPU + 6 -#define SGI_TIMER_IRQ SGINT_CPU + 7 - -#define SGI_FIFO_IRQ SGINT_LOCAL0 + 0 /* FIFO full */ -#define SGI_GIO_0_IRQ SGI_FIFO_IRQ /* GIO-0 */ -#define SGI_WD93_0_IRQ SGINT_LOCAL0 + 1 /* 1st onboard WD93 */ -#define SGI_WD93_1_IRQ SGINT_LOCAL0 + 2 /* 2nd onboard WD93 */ -#define SGI_ENET_IRQ SGINT_LOCAL0 + 3 /* onboard ethernet */ -#define SGI_MCDMA_IRQ SGINT_LOCAL0 + 4 /* MC DMA done */ -#define SGI_PARPORT_IRQ SGINT_LOCAL0 + 5 /* Parallel port */ -#define SGI_GIO_1_IRQ SGINT_LOCAL0 + 6 /* GE / GIO-1 / 2nd-HPC */ -#define SGI_MAP_0_IRQ SGINT_LOCAL0 + 7 /* Mappable interrupt 0 */ - -#define SGI_GPL0_IRQ SGINT_LOCAL1 + 0 /* General Purpose LOCAL1_N<0> */ -#define SGI_PANEL_IRQ SGINT_LOCAL1 + 1 /* front panel */ -#define SGI_GPL2_IRQ SGINT_LOCAL1 + 2 /* General Purpose LOCAL1_N<2> */ -#define SGI_MAP_1_IRQ SGINT_LOCAL1 + 3 /* Mappable interrupt 1 */ -#define SGI_HPCDMA_IRQ SGINT_LOCAL1 + 4 /* HPC DMA done */ -#define SGI_ACFAIL_IRQ SGINT_LOCAL1 + 5 /* AC fail */ -#define SGI_VINO_IRQ SGINT_LOCAL1 + 6 /* Indy VINO */ -#define SGI_GIO_2_IRQ SGINT_LOCAL1 + 7 /* Vert retrace / GIO-2 */ - -/* Mapped interrupts. These interrupts may be mapped to either 0, or 1 */ -#define SGI_VERT_IRQ SGINT_LOCAL2 + 0 /* INT3: newport vertical status */ -#define SGI_EISA_IRQ SGINT_LOCAL2 + 3 /* EISA interrupts */ -#define SGI_KEYBD_IRQ SGINT_LOCAL2 + 4 /* keyboard */ -#define SGI_SERIAL_IRQ SGINT_LOCAL2 + 5 /* onboard serial */ - -#define ip22_is_fullhouse() (sgioc->sysid & SGIOC_SYSID_FULLHOUSE) - -extern unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg); -extern unsigned short ip22_nvram_read(int reg); - -#endif diff --git a/include/asm-mips/sgi/mc.h b/include/asm-mips/sgi/mc.h deleted file mode 100644 index 1576c2394de8..000000000000 --- a/include/asm-mips/sgi/mc.h +++ /dev/null @@ -1,231 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * mc.h: Definitions for SGI Memory Controller - * - * Copyright (C) 1996 David S. Miller - * Copyright (C) 1999 Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ - -#ifndef _SGI_MC_H -#define _SGI_MC_H - -struct sgimc_regs { - u32 _unused0; - volatile u32 cpuctrl0; /* CPU control register 0, readwrite */ -#define SGIMC_CCTRL0_REFS 0x0000000f /* REFS mask */ -#define SGIMC_CCTRL0_EREFRESH 0x00000010 /* Memory refresh enable */ -#define SGIMC_CCTRL0_EPERRGIO 0x00000020 /* GIO parity error enable */ -#define SGIMC_CCTRL0_EPERRMEM 0x00000040 /* Main mem parity error enable */ -#define SGIMC_CCTRL0_EPERRCPU 0x00000080 /* CPU bus parity error enable */ -#define SGIMC_CCTRL0_WDOG 0x00000100 /* Watchdog timer enable */ -#define SGIMC_CCTRL0_SYSINIT 0x00000200 /* System init bit */ -#define SGIMC_CCTRL0_GFXRESET 0x00000400 /* Graphics interface reset */ -#define SGIMC_CCTRL0_EISALOCK 0x00000800 /* Lock CPU from memory for EISA */ -#define SGIMC_CCTRL0_EPERRSCMD 0x00001000 /* SysCMD bus parity error enable */ -#define SGIMC_CCTRL0_IENAB 0x00002000 /* Allow interrupts from MC */ -#define SGIMC_CCTRL0_ESNOOP 0x00004000 /* Snooping I/O enable */ -#define SGIMC_CCTRL0_EPROMWR 0x00008000 /* Prom writes from cpu enable */ -#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */ -#define SGIMC_CCTRL0_LENDIAN 0x00020000 /* Put MC in little-endian mode */ -#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */ -#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */ -#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */ -#define SGIMC_CCTRL0_GIOBTOB 0x08000000 /* Allow GIO back to back writes */ - u32 _unused1; - volatile u32 cpuctrl1; /* CPU control register 1, readwrite */ -#define SGIMC_CCTRL1_EGIOTIMEO 0x00000010 /* GIO bus timeout enable */ -#define SGIMC_CCTRL1_FIXEDEHPC 0x00001000 /* Fixed HPC endianness */ -#define SGIMC_CCTRL1_LITTLEHPC 0x00002000 /* Little endian HPC */ -#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */ -#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */ -#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */ -#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */ - - u32 _unused2; - volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */ - - u32 _unused3; - volatile u32 systemid; /* MC system ID register, readonly */ -#define SGIMC_SYSID_MASKREV 0x0000000f /* Revision of MC controller */ -#define SGIMC_SYSID_EPRESENT 0x00000010 /* Indicates presence of EISA bus */ - - u32 _unused4[3]; - volatile u32 divider; /* Divider reg for RPSS */ - - u32 _unused5; - u32 eeprom; /* EEPROM byte reg for r4k */ -#define SGIMC_EEPROM_PRE 0x00000001 /* eeprom chip PRE pin assertion */ -#define SGIMC_EEPROM_CSEL 0x00000002 /* Active high, eeprom chip select */ -#define SGIMC_EEPROM_SECLOCK 0x00000004 /* EEPROM serial clock */ -#define SGIMC_EEPROM_SDATAO 0x00000008 /* Serial EEPROM data-out */ -#define SGIMC_EEPROM_SDATAI 0x00000010 /* Serial EEPROM data-in */ - - u32 _unused6[3]; - volatile u32 rcntpre; /* Preload refresh counter */ - - u32 _unused7; - volatile u32 rcounter; /* Readonly refresh counter */ - - u32 _unused8[13]; - volatile u32 giopar; /* Parameter word for GIO64 */ -#define SGIMC_GIOPAR_HPC64 0x00000001 /* HPC talks to GIO using 64-bits */ -#define SGIMC_GIOPAR_GFX64 0x00000002 /* GFX talks to GIO using 64-bits */ -#define SGIMC_GIOPAR_EXP064 0x00000004 /* EXP(slot0) talks using 64-bits */ -#define SGIMC_GIOPAR_EXP164 0x00000008 /* EXP(slot1) talks using 64-bits */ -#define SGIMC_GIOPAR_EISA64 0x00000010 /* EISA bus talks 64-bits to GIO */ -#define SGIMC_GIOPAR_HPC264 0x00000020 /* 2nd HPX talks 64-bits to GIO */ -#define SGIMC_GIOPAR_RTIMEGFX 0x00000040 /* GFX device has realtime attr */ -#define SGIMC_GIOPAR_RTIMEEXP0 0x00000080 /* EXP(slot0) has realtime attr */ -#define SGIMC_GIOPAR_RTIMEEXP1 0x00000100 /* EXP(slot1) has realtime attr */ -#define SGIMC_GIOPAR_MASTEREISA 0x00000200 /* EISA bus can act as bus master */ -#define SGIMC_GIOPAR_ONEBUS 0x00000400 /* Exists one GIO64 pipelined bus */ -#define SGIMC_GIOPAR_MASTERGFX 0x00000800 /* GFX can act as a bus master */ -#define SGIMC_GIOPAR_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */ -#define SGIMC_GIOPAR_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */ -#define SGIMC_GIOPAR_PLINEEXP0 0x00004000 /* EXP(slot0) has pipeline attr */ -#define SGIMC_GIOPAR_PLINEEXP1 0x00008000 /* EXP(slot1) has pipeline attr */ - - u32 _unused9; - volatile u32 cputp; /* CPU bus arb time period */ - - u32 _unused10[3]; - volatile u32 lbursttp; /* Time period for long bursts */ - - /* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must - * be the same size. The size encoding for supported SIMMs is bellow */ - u32 _unused11[9]; - volatile u32 mconfig0; /* Memory config register zero */ - u32 _unused12; - volatile u32 mconfig1; /* Memory config register one */ -#define SGIMC_MCONFIG_BASEADDR 0x000000ff /* Base address of bank*/ -#define SGIMC_MCONFIG_RMASK 0x00001f00 /* Ram config bitmask */ -#define SGIMC_MCONFIG_BVALID 0x00002000 /* Bank is valid */ -#define SGIMC_MCONFIG_SBANKS 0x00004000 /* Number of subbanks */ - - u32 _unused13; - volatile u32 cmacc; /* Mem access config for CPU */ - u32 _unused14; - volatile u32 gmacc; /* Mem access config for GIO */ - - /* This define applies to both cmacc and gmacc registers above. */ -#define SGIMC_MACC_ALIASBIG 0x20000000 /* 512MB home for alias */ - - /* Error address/status regs from GIO and CPU perspectives. */ - u32 _unused15; - volatile u32 cerr; /* Error address reg for CPU */ - u32 _unused16; - volatile u32 cstat; /* Status reg for CPU */ -#define SGIMC_CSTAT_RD 0x00000100 /* read parity error */ -#define SGIMC_CSTAT_PAR 0x00000200 /* CPU parity error */ -#define SGIMC_CSTAT_ADDR 0x00000400 /* memory bus error bad addr */ -#define SGIMC_CSTAT_SYSAD_PAR 0x00000800 /* sysad parity error */ -#define SGIMC_CSTAT_SYSCMD_PAR 0x00001000 /* syscmd parity error */ -#define SGIMC_CSTAT_BAD_DATA 0x00002000 /* bad data identifier */ -#define SGIMC_CSTAT_PAR_MASK 0x00001f00 /* parity error mask */ -#define SGIMC_CSTAT_RD_PAR (SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR) - - u32 _unused17; - volatile u32 gerr; /* Error address reg for GIO */ - u32 _unused18; - volatile u32 gstat; /* Status reg for GIO */ -#define SGIMC_GSTAT_RD 0x00000100 /* read parity error */ -#define SGIMC_GSTAT_WR 0x00000200 /* write parity error */ -#define SGIMC_GSTAT_TIME 0x00000400 /* GIO bus timed out */ -#define SGIMC_GSTAT_PROM 0x00000800 /* write to PROM when PROM_EN not set */ -#define SGIMC_GSTAT_ADDR 0x00001000 /* parity error on addr cycle */ -#define SGIMC_GSTAT_BC 0x00002000 /* parity error on byte count cycle */ -#define SGIMC_GSTAT_PIO_RD 0x00004000 /* read data parity on pio */ -#define SGIMC_GSTAT_PIO_WR 0x00008000 /* write data parity on pio */ - - /* Special hard bus locking registers. */ - u32 _unused19; - volatile u32 syssembit; /* Uni-bit system semaphore */ - u32 _unused20; - volatile u32 mlock; /* Global GIO memory access lock */ - u32 _unused21; - volatile u32 elock; /* Locks EISA from GIO accesses */ - - /* GIO dma control registers. */ - u32 _unused22[15]; - volatile u32 gio_dma_trans; /* DMA mask to translation GIO addrs */ - u32 _unused23; - volatile u32 gio_dma_sbits; /* DMA GIO addr substitution bits */ - u32 _unused24; - volatile u32 dma_intr_cause; /* DMA IRQ cause indicator bits */ - u32 _unused25; - volatile u32 dma_ctrl; /* Main DMA control reg */ - - /* DMA TLB entry 0 */ - u32 _unused26[5]; - volatile u32 dtlb_hi0; - u32 _unused27; - volatile u32 dtlb_lo0; - - /* DMA TLB entry 1 */ - u32 _unused28; - volatile u32 dtlb_hi1; - u32 _unused29; - volatile u32 dtlb_lo1; - - /* DMA TLB entry 2 */ - u32 _unused30; - volatile u32 dtlb_hi2; - u32 _unused31; - volatile u32 dtlb_lo2; - - /* DMA TLB entry 3 */ - u32 _unused32; - volatile u32 dtlb_hi3; - u32 _unused33; - volatile u32 dtlb_lo3; - - u32 _unused34[0x0392]; - - u32 _unused35; - volatile u32 rpsscounter; /* Chirps at 100ns */ - - u32 _unused36[0x1000/4-2*4]; - - u32 _unused37; - volatile u32 maddronly; /* Address DMA goes at */ - u32 _unused38; - volatile u32 maddrpdeflts; /* Same as above, plus set defaults */ - u32 _unused39; - volatile u32 dmasz; /* DMA count */ - u32 _unused40; - volatile u32 ssize; /* DMA stride size */ - u32 _unused41; - volatile u32 gmaddronly; /* Set GIO DMA but don't start trans */ - u32 _unused42; - volatile u32 dmaddnpgo; /* Set GIO DMA addr + start transfer */ - u32 _unused43; - volatile u32 dmamode; /* DMA mode config bit settings */ - u32 _unused44; - volatile u32 dmaccount; /* Zoom and byte count for DMA */ - u32 _unused45; - volatile u32 dmastart; /* Pedal to the metal. */ - u32 _unused46; - volatile u32 dmarunning; /* DMA op is in progress */ - u32 _unused47; - volatile u32 maddrdefstart; /* Set dma addr, defaults, and kick it */ -}; - -extern struct sgimc_regs *sgimc; -#define SGIMC_BASE 0x1fa00000 /* physical */ - -/* Base location of the two ram banks found in IP2[0268] machines. */ -#define SGIMC_SEG0_BADDR 0x08000000 -#define SGIMC_SEG1_BADDR 0x20000000 - -/* Maximum size of the above banks are per machine. */ -#define SGIMC_SEG0_SIZE_ALL 0x10000000 /* 256MB */ -#define SGIMC_SEG1_SIZE_IP20_IP22 0x08000000 /* 128MB */ -#define SGIMC_SEG1_SIZE_IP26_IP28 0x20000000 /* 512MB */ - -extern void sgimc_init(void); - -#endif /* _SGI_MC_H */ diff --git a/include/asm-mips/sgi/pi1.h b/include/asm-mips/sgi/pi1.h deleted file mode 100644 index c9506915dc5c..000000000000 --- a/include/asm-mips/sgi/pi1.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * pi1.h: Definitions for SGI PI1 parallel port - */ - -#ifndef _SGI_PI1_H -#define _SGI_PI1_H - -struct pi1_regs { - u8 _data[3]; - volatile u8 data; - u8 _ctrl[3]; - volatile u8 ctrl; -#define PI1_CTRL_STROBE_N 0x01 -#define PI1_CTRL_AFD_N 0x02 -#define PI1_CTRL_INIT_N 0x04 -#define PI1_CTRL_SLIN_N 0x08 -#define PI1_CTRL_IRQ_ENA 0x10 -#define PI1_CTRL_DIR 0x20 -#define PI1_CTRL_SEL 0x40 - u8 _status[3]; - volatile u8 status; -#define PI1_STAT_DEVID 0x03 /* bits 0-1 */ -#define PI1_STAT_NOINK 0x04 /* SGI MODE only */ -#define PI1_STAT_ERROR 0x08 -#define PI1_STAT_ONLINE 0x10 -#define PI1_STAT_PE 0x20 -#define PI1_STAT_ACK 0x40 -#define PI1_STAT_BUSY 0x80 - u8 _dmactrl[3]; - volatile u8 dmactrl; -#define PI1_DMACTRL_FIFO_EMPTY 0x01 /* fifo empty R/O */ -#define PI1_DMACTRL_ABORT 0x02 /* reset DMA and internal fifo W/O */ -#define PI1_DMACTRL_STDMODE 0x00 /* bits 2-3 */ -#define PI1_DMACTRL_SGIMODE 0x04 /* bits 2-3 */ -#define PI1_DMACTRL_RICOHMODE 0x08 /* bits 2-3 */ -#define PI1_DMACTRL_HPMODE 0x0c /* bits 2-3 */ -#define PI1_DMACTRL_BLKMODE 0x10 /* block mode */ -#define PI1_DMACTRL_FIFO_CLEAR 0x20 /* clear fifo W/O */ -#define PI1_DMACTRL_READ 0x40 /* read */ -#define PI1_DMACTRL_RUN 0x80 /* pedal to the metal */ - u8 _intstat[3]; - volatile u8 intstat; -#define PI1_INTSTAT_ACK 0x04 -#define PI1_INTSTAT_FEMPTY 0x08 -#define PI1_INTSTAT_NOINK 0x10 -#define PI1_INTSTAT_ONLINE 0x20 -#define PI1_INTSTAT_ERR 0x40 -#define PI1_INTSTAT_PE 0x80 - u8 _intmask[3]; - volatile u8 intmask; /* enabled low, reset high*/ -#define PI1_INTMASK_ACK 0x04 -#define PI1_INTMASK_FIFO_EMPTY 0x08 -#define PI1_INTMASK_NOINK 0x10 -#define PI1_INTMASK_ONLINE 0x20 -#define PI1_INTMASK_ERR 0x40 -#define PI1_INTMASK_PE 0x80 - u8 _timer1[3]; - volatile u8 timer1; -#define PI1_TIME1 0x27 - u8 _timer2[3]; - volatile u8 timer2; -#define PI1_TIME2 0x13 - u8 _timer3[3]; - volatile u8 timer3; -#define PI1_TIME3 0x10 - u8 _timer4[3]; - volatile u8 timer4; -#define PI1_TIME4 0x00 -}; - -#endif diff --git a/include/asm-mips/sgi/seeq.h b/include/asm-mips/sgi/seeq.h deleted file mode 100644 index af0ffd76899d..000000000000 --- a/include/asm-mips/sgi/seeq.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 by Ralf Baechle - */ -#ifndef __ASM_SGI_SEEQ_H -#define __ASM_SGI_SEEQ_H - -#include - -#include - -struct sgiseeq_platform_data { - struct hpc3_regs *hpc; - unsigned int irq; - unsigned char mac[ETH_ALEN]; -}; - -#endif /* __ASM_SGI_SEEQ_H */ diff --git a/include/asm-mips/sgi/sgi.h b/include/asm-mips/sgi/sgi.h deleted file mode 100644 index 645cea7c0f8e..000000000000 --- a/include/asm-mips/sgi/sgi.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * sgi.h: Definitions specific to SGI machines. - * - * Copyright (C) 1996 David S. Miller (dm@sgi.com) - */ -#ifndef _ASM_SGI_SGI_H -#define _ASM_SGI_SGI_H - -/* UP=UniProcessor MP=MultiProcessor(capable) */ -enum sgi_mach { - ip4, /* R2k UP */ - ip5, /* R2k MP */ - ip6, /* R3k UP */ - ip7, /* R3k MP */ - ip9, /* R3k UP */ - ip12, /* R3kA UP, Indigo */ - ip15, /* R3kA MP */ - ip17, /* R4K UP */ - ip19, /* R4K MP */ - ip20, /* R4K UP, Indigo */ - ip21, /* TFP MP */ - ip22, /* R4x00 UP, Indigo2 */ - ip25, /* R10k MP */ - ip26, /* TFP UP, Indigo2 */ - ip27, /* R10k MP, R12k MP, Origin */ - ip28, /* R10k UP, Indigo2 */ - ip30, /* Octane */ - ip32, /* O2 */ -}; - -extern enum sgi_mach sgimach; -extern void sgi_sysinit(void); - -/* Many I/O space registers are byte sized and are contained within - * one byte per word, specifically the MSB, this macro helps out. - */ -#ifdef __MIPSEL__ -#define SGI_MSB(regaddr) (regaddr) -#else -#define SGI_MSB(regaddr) ((regaddr) | 0x3) -#endif - -#endif /* _ASM_SGI_SGI_H */ diff --git a/include/asm-mips/sgi/wd.h b/include/asm-mips/sgi/wd.h deleted file mode 100644 index 0d6c3a4da891..000000000000 --- a/include/asm-mips/sgi/wd.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 by Ralf Baechle - */ -#ifndef __ASM_SGI_WD_H -#define __ASM_SGI_WD_H - -#include - -struct sgiwd93_platform_data { - unsigned int unit; - unsigned int irq; - struct hpc3_scsiregs *hregs; - unsigned char *wdregs; -}; - -#endif /* __ASM_SGI_WD_H */ diff --git a/include/asm-mips/sgialib.h b/include/asm-mips/sgialib.h deleted file mode 100644 index bfce5c786f1c..000000000000 --- a/include/asm-mips/sgialib.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * SGI ARCS firmware interface library for the Linux kernel. - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - * Copyright (C) 2001, 2002 Ralf Baechle (ralf@gnu.org) - */ -#ifndef _ASM_SGIALIB_H -#define _ASM_SGIALIB_H - -#include - -extern struct linux_romvec *romvec; -extern int prom_argc; - -extern LONG *_prom_argv, *_prom_envp; - -/* A 32-bit ARC PROM pass arguments and environment as 32-bit pointer. - These macros take care of sign extension. */ -#define prom_argv(index) ((char *) (long) _prom_argv[(index)]) -#define prom_argc(index) ((char *) (long) _prom_argc[(index)]) - -extern int prom_flags; - -#define PROM_FLAG_ARCS 1 -#define PROM_FLAG_USE_AS_CONSOLE 2 -#define PROM_FLAG_DONT_FREE_TEMP 4 - -/* Simple char-by-char console I/O. */ -extern void prom_putchar(char c); -extern char prom_getchar(void); - -/* Memory descriptor management. */ -#define PROM_MAX_PMEMBLOCKS 32 -struct prom_pmemblock { - LONG base; /* Within KSEG0 or XKPHYS. */ - ULONG size; /* In bytes. */ - ULONG type; /* free or prom memory */ -}; - -/* Get next memory descriptor after CURR, returns first descriptor - * in chain is CURR is NULL. - */ -extern struct linux_mdesc *prom_getmdesc(struct linux_mdesc *curr); -#define PROM_NULL_MDESC ((struct linux_mdesc *) 0) - -/* Called by prom_init to setup the physical memory pmemblock - * array. - */ -extern void prom_meminit(void); -extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); - -/* PROM device tree library routines. */ -#define PROM_NULL_COMPONENT ((pcomponent *) 0) - -/* Get sibling component of THIS. */ -extern pcomponent *ArcGetPeer(pcomponent *this); - -/* Get child component of THIS. */ -extern pcomponent *ArcGetChild(pcomponent *this); - -/* Get parent component of CHILD. */ -extern pcomponent *prom_getparent(pcomponent *child); - -/* Copy component opaque data of component THIS into BUFFER - * if component THIS has opaque data. Returns success or - * failure status. - */ -extern long prom_getcdata(void *buffer, pcomponent *this); - -/* Other misc. component routines. */ -extern pcomponent *prom_childadd(pcomponent *this, pcomponent *tmp, void *data); -extern long prom_delcomponent(pcomponent *this); -extern pcomponent *prom_componentbypath(char *path); - -/* This is called at prom_init time to identify the - * ARC architecture we are running on - */ -extern void prom_identify_arch(void); - -/* Environment variable routines. */ -extern PCHAR ArcGetEnvironmentVariable(PCHAR name); -extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value); - -/* ARCS command line acquisition and parsing. */ -extern char *prom_getcmdline(void); -extern void prom_init_cmdline(void); - -/* Acquiring info about the current time, etc. */ -extern struct linux_tinfo *prom_gettinfo(void); -extern unsigned long prom_getrtime(void); - -/* File operations. */ -extern long prom_getvdirent(unsigned long fd, struct linux_vdirent *ent, unsigned long num, unsigned long *cnt); -extern long prom_open(char *name, enum linux_omode md, unsigned long *fd); -extern long prom_close(unsigned long fd); -extern LONG ArcRead(ULONG fd, PVOID buf, ULONG num, PULONG cnt); -extern long prom_getrstatus(unsigned long fd); -extern LONG ArcWrite(ULONG fd, PVOID buf, ULONG num, PULONG cnt); -extern long prom_seek(unsigned long fd, struct linux_bigint *off, enum linux_seekmode sm); -extern long prom_mount(char *name, enum linux_mountops op); -extern long prom_getfinfo(unsigned long fd, struct linux_finfo *buf); -extern long prom_setfinfo(unsigned long fd, unsigned long flags, unsigned long msk); - -/* Running stand-along programs. */ -extern long prom_load(char *name, unsigned long end, unsigned long *pc, unsigned long *eaddr); -extern long prom_invoke(unsigned long pc, unsigned long sp, long argc, char **argv, char **envp); -extern long prom_exec(char *name, long argc, char **argv, char **envp); - -/* Misc. routines. */ -extern VOID prom_halt(VOID) __attribute__((noreturn)); -extern VOID prom_powerdown(VOID) __attribute__((noreturn)); -extern VOID prom_restart(VOID) __attribute__((noreturn)); -extern VOID ArcReboot(VOID) __attribute__((noreturn)); -extern VOID ArcEnterInteractiveMode(VOID) __attribute__((noreturn)); -extern long prom_cfgsave(VOID); -extern struct linux_sysid *prom_getsysid(VOID); -extern VOID ArcFlushAllCaches(VOID); -extern DISPLAY_STATUS *ArcGetDisplayStatus(ULONG FileID); - -#endif /* _ASM_SGIALIB_H */ diff --git a/include/asm-mips/sgiarcs.h b/include/asm-mips/sgiarcs.h deleted file mode 100644 index 721327f88601..000000000000 --- a/include/asm-mips/sgiarcs.h +++ /dev/null @@ -1,548 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * ARC firmware interface defines. - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - * Copyright (C) 1999, 2001 Ralf Baechle (ralf@gnu.org) - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_SGIARCS_H -#define _ASM_SGIARCS_H - -#include -#include - -/* Various ARCS error codes. */ -#define PROM_ESUCCESS 0x00 -#define PROM_E2BIG 0x01 -#define PROM_EACCESS 0x02 -#define PROM_EAGAIN 0x03 -#define PROM_EBADF 0x04 -#define PROM_EBUSY 0x05 -#define PROM_EFAULT 0x06 -#define PROM_EINVAL 0x07 -#define PROM_EIO 0x08 -#define PROM_EISDIR 0x09 -#define PROM_EMFILE 0x0a -#define PROM_EMLINK 0x0b -#define PROM_ENAMETOOLONG 0x0c -#define PROM_ENODEV 0x0d -#define PROM_ENOENT 0x0e -#define PROM_ENOEXEC 0x0f -#define PROM_ENOMEM 0x10 -#define PROM_ENOSPC 0x11 -#define PROM_ENOTDIR 0x12 -#define PROM_ENOTTY 0x13 -#define PROM_ENXIO 0x14 -#define PROM_EROFS 0x15 -/* SGI ARCS specific errno's. */ -#define PROM_EADDRNOTAVAIL 0x1f -#define PROM_ETIMEDOUT 0x20 -#define PROM_ECONNABORTED 0x21 -#define PROM_ENOCONNECT 0x22 - -/* Device classes, types, and identifiers for prom - * device inventory queries. - */ -enum linux_devclass { - system, processor, cache, adapter, controller, peripheral, memory -}; - -enum linux_devtypes { - /* Generic stuff. */ - Arc, Cpu, Fpu, - - /* Primary insn and data caches. */ - picache, pdcache, - - /* Secondary insn, data, and combined caches. */ - sicache, sdcache, sccache, - - memdev, eisa_adapter, tc_adapter, scsi_adapter, dti_adapter, - multifunc_adapter, dsk_controller, tp_controller, cdrom_controller, - worm_controller, serial_controller, net_controller, disp_controller, - parallel_controller, ptr_controller, kbd_controller, audio_controller, - misc_controller, disk_peripheral, flpy_peripheral, tp_peripheral, - modem_peripheral, monitor_peripheral, printer_peripheral, - ptr_peripheral, kbd_peripheral, term_peripheral, line_peripheral, - net_peripheral, misc_peripheral, anon -}; - -enum linux_identifier { - bogus, ronly, removable, consin, consout, input, output -}; - -/* A prom device tree component. */ -struct linux_component { - enum linux_devclass class; /* node class */ - enum linux_devtypes type; /* node type */ - enum linux_identifier iflags; /* node flags */ - USHORT vers; /* node version */ - USHORT rev; /* node revision */ - ULONG key; /* completely magic */ - ULONG amask; /* XXX affinity mask??? */ - ULONG cdsize; /* size of configuration data */ - ULONG ilen; /* length of string identifier */ - _PULONG iname; /* string identifier */ -}; -typedef struct linux_component pcomponent; - -struct linux_sysid { - char vend[8], prod[8]; -}; - -/* ARCS prom memory descriptors. */ -enum arcs_memtypes { - arcs_eblock, /* exception block */ - arcs_rvpage, /* ARCS romvec page */ - arcs_fcontig, /* Contiguous and free */ - arcs_free, /* Generic free memory */ - arcs_bmem, /* Borken memory, don't use */ - arcs_prog, /* A loaded program resides here */ - arcs_atmp, /* ARCS temporary storage area, wish Sparc OpenBoot told this */ - arcs_aperm, /* ARCS permanent storage... */ -}; - -/* ARC has slightly different types than ARCS */ -enum arc_memtypes { - arc_eblock, /* exception block */ - arc_rvpage, /* romvec page */ - arc_free, /* Generic free memory */ - arc_bmem, /* Borken memory, don't use */ - arc_prog, /* A loaded program resides here */ - arc_atmp, /* temporary storage area */ - arc_aperm, /* permanent storage */ - arc_fcontig, /* Contiguous and free */ -}; - -union linux_memtypes { - enum arcs_memtypes arcs; - enum arc_memtypes arc; -}; - -struct linux_mdesc { - union linux_memtypes type; - ULONG base; - ULONG pages; -}; - -/* Time of day descriptor. */ -struct linux_tinfo { - unsigned short yr; - unsigned short mnth; - unsigned short day; - unsigned short hr; - unsigned short min; - unsigned short sec; - unsigned short msec; -}; - -/* ARCS virtual dirents. */ -struct linux_vdirent { - ULONG namelen; - unsigned char attr; - char fname[32]; /* XXX imperical, should be a define */ -}; - -/* Other stuff for files. */ -enum linux_omode { - rdonly, wronly, rdwr, wronly_creat, rdwr_creat, - wronly_ssede, rdwr_ssede, dirent, dirent_creat -}; - -enum linux_seekmode { - absolute, relative -}; - -enum linux_mountops { - media_load, media_unload -}; - -/* This prom has a bolixed design. */ -struct linux_bigint { -#ifdef __MIPSEL__ - u32 lo; - s32 hi; -#else /* !(__MIPSEL__) */ - s32 hi; - u32 lo; -#endif -}; - -struct linux_finfo { - struct linux_bigint begin; - struct linux_bigint end; - struct linux_bigint cur; - enum linux_devtypes dtype; - unsigned long namelen; - unsigned char attr; - char name[32]; /* XXX imperical, should be define */ -}; - -/* This describes the vector containing function pointers to the ARC - firmware functions. */ -struct linux_romvec { - LONG load; /* Load an executable image. */ - LONG invoke; /* Invoke a standalong image. */ - LONG exec; /* Load and begin execution of a - standalone image. */ - LONG halt; /* Halt the machine. */ - LONG pdown; /* Power down the machine. */ - LONG restart; /* XXX soft reset??? */ - LONG reboot; /* Reboot the machine. */ - LONG imode; /* Enter PROM interactive mode. */ - LONG _unused1; /* Was ReturnFromMain(). */ - - /* PROM device tree interface. */ - LONG next_component; - LONG child_component; - LONG parent_component; - LONG component_data; - LONG child_add; - LONG comp_del; - LONG component_by_path; - - /* Misc. stuff. */ - LONG cfg_save; - LONG get_sysid; - - /* Probing for memory. */ - LONG get_mdesc; - LONG _unused2; /* was Signal() */ - - LONG get_tinfo; - LONG get_rtime; - - /* File type operations. */ - LONG get_vdirent; - LONG open; - LONG close; - LONG read; - LONG get_rstatus; - LONG write; - LONG seek; - LONG mount; - - /* Dealing with firmware environment variables. */ - LONG get_evar; - LONG set_evar; - - LONG get_finfo; - LONG set_finfo; - - /* Miscellaneous. */ - LONG cache_flush; - LONG TestUnicodeCharacter; /* ARC; not sure if ARCS too */ - LONG GetDisplayStatus; -}; - -/* The SGI ARCS parameter block is in a fixed location for standalone - * programs to access PROM facilities easily. - */ -typedef struct _SYSTEM_PARAMETER_BLOCK { - ULONG magic; /* magic cookie */ -#define PROMBLOCK_MAGIC 0x53435241 - - ULONG len; /* length of parm block */ - USHORT ver; /* ARCS firmware version */ - USHORT rev; /* ARCS firmware revision */ - _PLONG rs_block; /* Restart block. */ - _PLONG dbg_block; /* Debug block. */ - _PLONG gevect; /* XXX General vector??? */ - _PLONG utlbvect; /* XXX UTLB vector??? */ - ULONG rveclen; /* Size of romvec struct. */ - _PVOID romvec; /* Function interface. */ - ULONG pveclen; /* Length of private vector. */ - _PVOID pvector; /* Private vector. */ - ULONG adap_cnt; /* Adapter count. */ - ULONG adap_typ0; /* First adapter type. */ - ULONG adap_vcnt0; /* Adapter 0 vector count. */ - _PVOID adap_vector; /* Adapter 0 vector ptr. */ - ULONG adap_typ1; /* Second adapter type. */ - ULONG adap_vcnt1; /* Adapter 1 vector count. */ - _PVOID adap_vector1; /* Adapter 1 vector ptr. */ - /* More adapter vectors go here... */ -} SYSTEM_PARAMETER_BLOCK, *PSYSTEM_PARAMETER_BLOCK; - -#define PROMBLOCK ((PSYSTEM_PARAMETER_BLOCK) (int)0xA0001000) -#define ROMVECTOR ((struct linux_romvec *) (long)(PROMBLOCK)->romvec) - -/* Cache layout parameter block. */ -union linux_cache_key { - struct param { -#ifdef __MIPSEL__ - unsigned short size; - unsigned char lsize; - unsigned char bsize; -#else /* !(__MIPSEL__) */ - unsigned char bsize; - unsigned char lsize; - unsigned short size; -#endif - } info; - unsigned long allinfo; -}; - -/* Configuration data. */ -struct linux_cdata { - char *name; - int mlen; - enum linux_devtypes type; -}; - -/* Common SGI ARCS firmware file descriptors. */ -#define SGIPROM_STDIN 0 -#define SGIPROM_STDOUT 1 - -/* Common SGI ARCS firmware file types. */ -#define SGIPROM_ROFILE 0x01 /* read-only file */ -#define SGIPROM_HFILE 0x02 /* hidden file */ -#define SGIPROM_SFILE 0x04 /* System file */ -#define SGIPROM_AFILE 0x08 /* Archive file */ -#define SGIPROM_DFILE 0x10 /* Directory file */ -#define SGIPROM_DELFILE 0x20 /* Deleted file */ - -/* SGI ARCS boot record information. */ -struct sgi_partition { - unsigned char flag; -#define SGIPART_UNUSED 0x00 -#define SGIPART_ACTIVE 0x80 - - unsigned char shead, ssect, scyl; /* unused */ - unsigned char systype; /* OS type, Irix or NT */ - unsigned char ehead, esect, ecyl; /* unused */ - unsigned char rsect0, rsect1, rsect2, rsect3; - unsigned char tsect0, tsect1, tsect2, tsect3; -}; - -#define SGIBBLOCK_MAGIC 0xaa55 -#define SGIBBLOCK_MAXPART 0x0004 - -struct sgi_bootblock { - unsigned char _unused[446]; - struct sgi_partition partitions[SGIBBLOCK_MAXPART]; - unsigned short magic; -}; - -/* BIOS parameter block. */ -struct sgi_bparm_block { - unsigned short bytes_sect; /* bytes per sector */ - unsigned char sect_clust; /* sectors per cluster */ - unsigned short sect_resv; /* reserved sectors */ - unsigned char nfats; /* # of allocation tables */ - unsigned short nroot_dirents; /* # of root directory entries */ - unsigned short sect_volume; /* sectors in volume */ - unsigned char media_type; /* media descriptor */ - unsigned short sect_fat; /* sectors per allocation table */ - unsigned short sect_track; /* sectors per track */ - unsigned short nheads; /* # of heads */ - unsigned short nhsects; /* # of hidden sectors */ -}; - -struct sgi_bsector { - unsigned char jmpinfo[3]; - unsigned char manuf_name[8]; - struct sgi_bparm_block info; -}; - -/* Debugging block used with SGI symmon symbolic debugger. */ -#define SMB_DEBUG_MAGIC 0xfeeddead -struct linux_smonblock { - unsigned long magic; - void (*handler)(void); /* Breakpoint routine. */ - unsigned long dtable_base; /* Base addr of dbg table. */ - int (*printf)(const char *fmt, ...); - unsigned long btable_base; /* Breakpoint table. */ - unsigned long mpflushreqs; /* SMP cache flush request list. */ - unsigned long ntab; /* Name table. */ - unsigned long stab; /* Symbol table. */ - int smax; /* Max # of symbols. */ -}; - -/* - * Macros for calling a 32-bit ARC implementation from 64-bit code - */ - -#if defined(CONFIG_64BIT) && defined(CONFIG_ARC32) - -#define __arc_clobbers \ - "$2", "$3" /* ... */, "$8", "$9", "$10", "$11", \ - "$12", "$13", "$14", "$15", "$16", "$24", "$25", "$31" - -#define ARC_CALL0(dest) \ -({ long __res; \ - long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec) \ - : __arc_clobbers, "$4", "$5", "$6", "$7"); \ - (unsigned long) __res; \ -}) - -#define ARC_CALL1(dest, a1) \ -({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1) \ - : __arc_clobbers, "$5", "$6", "$7"); \ - (unsigned long) __res; \ -}) - -#define ARC_CALL2(dest, a1, a2) \ -({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - register signed int __a2 __asm__("$5") = (int) (long) (a2); \ - long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1), "r" (__a2) \ - : __arc_clobbers, "$6", "$7"); \ - __res; \ -}) - -#define ARC_CALL3(dest, a1, a2, a3) \ -({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - register signed int __a2 __asm__("$5") = (int) (long) (a2); \ - register signed int __a3 __asm__("$6") = (int) (long) (a3); \ - long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3) \ - : __arc_clobbers, "$7"); \ - __res; \ -}) - -#define ARC_CALL4(dest, a1, a2, a3, a4) \ -({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - register signed int __a2 __asm__("$5") = (int) (long) (a2); \ - register signed int __a3 __asm__("$6") = (int) (long) (a3); \ - register signed int __a4 __asm__("$7") = (int) (long) (a4); \ - long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3), \ - "r" (__a4) \ - : __arc_clobbers); \ - __res; \ -}) - -#define ARC_CALL5(dest, a1, a2, a3, a4, a5) \ -({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - register signed int __a2 __asm__("$5") = (int) (long) (a2); \ - register signed int __a3 __asm__("$6") = (int) (long) (a3); \ - register signed int __a4 __asm__("$7") = (int) (long) (a4); \ - register signed int __a5 = (int) (long) (a5); \ - long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "sw\t%7, 16($29)\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), \ - "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4), \ - "r" (__a5) \ - : __arc_clobbers); \ - __res; \ -}) - -#endif /* defined(CONFIG_64BIT) && defined(CONFIG_ARC32) */ - -#if (defined(CONFIG_32BIT) && defined(CONFIG_ARC32)) || \ - (defined(CONFIG_64BIT) && defined(CONFIG_ARC64)) - -#define ARC_CALL0(dest) \ -({ long __res; \ - long (*__vec)(void) = (void *) romvec->dest; \ - \ - __res = __vec(); \ - __res; \ -}) - -#define ARC_CALL1(dest, a1) \ -({ long __res; \ - long __a1 = (long) (a1); \ - long (*__vec)(long) = (void *) romvec->dest; \ - \ - __res = __vec(__a1); \ - __res; \ -}) - -#define ARC_CALL2(dest, a1, a2) \ -({ long __res; \ - long __a1 = (long) (a1); \ - long __a2 = (long) (a2); \ - long (*__vec)(long, long) = (void *) romvec->dest; \ - \ - __res = __vec(__a1, __a2); \ - __res; \ -}) - -#define ARC_CALL3(dest, a1, a2, a3) \ -({ long __res; \ - long __a1 = (long) (a1); \ - long __a2 = (long) (a2); \ - long __a3 = (long) (a3); \ - long (*__vec)(long, long, long) = (void *) romvec->dest; \ - \ - __res = __vec(__a1, __a2, __a3); \ - __res; \ -}) - -#define ARC_CALL4(dest, a1, a2, a3, a4) \ -({ long __res; \ - long __a1 = (long) (a1); \ - long __a2 = (long) (a2); \ - long __a3 = (long) (a3); \ - long __a4 = (long) (a4); \ - long (*__vec)(long, long, long, long) = (void *) romvec->dest; \ - \ - __res = __vec(__a1, __a2, __a3, __a4); \ - __res; \ -}) - -#define ARC_CALL5(dest, a1, a2, a3, a4, a5) \ -({ long __res; \ - long __a1 = (long) (a1); \ - long __a2 = (long) (a2); \ - long __a3 = (long) (a3); \ - long __a4 = (long) (a4); \ - long __a5 = (long) (a5); \ - long (*__vec)(long, long, long, long, long); \ - __vec = (void *) romvec->dest; \ - \ - __res = __vec(__a1, __a2, __a3, __a4, __a5); \ - __res; \ -}) -#endif /* both kernel and ARC either 32-bit or 64-bit */ - -#endif /* _ASM_SGIARCS_H */ diff --git a/include/asm-mips/sgidefs.h b/include/asm-mips/sgidefs.h deleted file mode 100644 index 876442fcfb32..000000000000 --- a/include/asm-mips/sgidefs.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 1999, 2001 Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - * Copyright (C) 2001 MIPS Technologies, Inc. - */ -#ifndef __ASM_SGIDEFS_H -#define __ASM_SGIDEFS_H - -/* - * Using a Linux compiler for building Linux seems logic but not to - * everybody. - */ -#ifndef __linux__ -#error Use a Linux compiler or give up. -#endif - -/* - * Definitions for the ISA levels - * - * With the introduction of MIPS32 / MIPS64 instruction sets definitions - * MIPS ISAs are no longer subsets of each other. Therefore comparisons - * on these symbols except with == may result in unexpected results and - * are forbidden! - */ -#define _MIPS_ISA_MIPS1 1 -#define _MIPS_ISA_MIPS2 2 -#define _MIPS_ISA_MIPS3 3 -#define _MIPS_ISA_MIPS4 4 -#define _MIPS_ISA_MIPS5 5 -#define _MIPS_ISA_MIPS32 6 -#define _MIPS_ISA_MIPS64 7 - -/* - * Subprogram calling convention - */ -#define _MIPS_SIM_ABI32 1 -#define _MIPS_SIM_NABI32 2 -#define _MIPS_SIM_ABI64 3 - -#endif /* __ASM_SGIDEFS_H */ diff --git a/include/asm-mips/shmbuf.h b/include/asm-mips/shmbuf.h deleted file mode 100644 index f994438277bf..000000000000 --- a/include/asm-mips/shmbuf.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef _ASM_SHMBUF_H -#define _ASM_SHMBUF_H - -/* - * The shmid64_ds structure for the MIPS architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 2 miscellaneous 32-bit rsp. 64-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - __kernel_time_t shm_dtime; /* last detach time */ - __kernel_time_t shm_ctime; /* last change time */ - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused1; - unsigned long __unused2; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_SHMBUF_H */ diff --git a/include/asm-mips/shmparam.h b/include/asm-mips/shmparam.h deleted file mode 100644 index 09290720751c..000000000000 --- a/include/asm-mips/shmparam.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef _ASM_SHMPARAM_H -#define _ASM_SHMPARAM_H - -#define __ARCH_FORCE_SHMLBA 1 - -#define SHMLBA 0x40000 /* attach addr a multiple of this */ - -#endif /* _ASM_SHMPARAM_H */ diff --git a/include/asm-mips/sibyte/bcm1480_int.h b/include/asm-mips/sibyte/bcm1480_int.h deleted file mode 100644 index 6109557c14e9..000000000000 --- a/include/asm-mips/sibyte/bcm1480_int.h +++ /dev/null @@ -1,312 +0,0 @@ -/* ********************************************************************* - * BCM1280/BCM1480 Board Support Package - * - * Interrupt Mapper definitions File: bcm1480_int.h - * - * This module contains constants for manipulating the - * BCM1255/BCM1280/BCM1455/BCM1480's interrupt mapper and - * definitions for the interrupt sources. - * - * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03) - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _BCM1480_INT_H -#define _BCM1480_INT_H - -#include "sb1250_defs.h" - -/* ********************************************************************* - * Interrupt Mapper Constants - ********************************************************************* */ - -/* - * The interrupt mapper deals with 128-bit logical registers that are - * implemented as pairs of 64-bit registers, with the "low" 64 bits in - * a register that has an address 0x1000 higher(!) than the - * corresponding "high" register. - * - * For appropriate registers, bit 0 of the "high" register is a - * cascade bit that summarizes (as a bit-OR) the 64 bits of the "low" - * register. - */ - -/* - * This entire file uses _BCM1480_ in all the symbols because it is - * entirely BCM1480 specific. - */ - -/* - * Interrupt sources (Table 22) - */ - -#define K_BCM1480_INT_SOURCES 128 - -#define _BCM1480_INT_HIGH(k) (k) -#define _BCM1480_INT_LOW(k) ((k)+64) - -#define K_BCM1480_INT_ADDR_TRAP _BCM1480_INT_HIGH(1) -#define K_BCM1480_INT_GPIO_0 _BCM1480_INT_HIGH(4) -#define K_BCM1480_INT_GPIO_1 _BCM1480_INT_HIGH(5) -#define K_BCM1480_INT_GPIO_2 _BCM1480_INT_HIGH(6) -#define K_BCM1480_INT_GPIO_3 _BCM1480_INT_HIGH(7) -#define K_BCM1480_INT_PCI_INTA _BCM1480_INT_HIGH(8) -#define K_BCM1480_INT_PCI_INTB _BCM1480_INT_HIGH(9) -#define K_BCM1480_INT_PCI_INTC _BCM1480_INT_HIGH(10) -#define K_BCM1480_INT_PCI_INTD _BCM1480_INT_HIGH(11) -#define K_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_HIGH(12) -#define K_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_HIGH(13) -#define K_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_HIGH(14) -#define K_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_HIGH(15) -#define K_BCM1480_INT_TIMER_0 _BCM1480_INT_HIGH(20) -#define K_BCM1480_INT_TIMER_1 _BCM1480_INT_HIGH(21) -#define K_BCM1480_INT_TIMER_2 _BCM1480_INT_HIGH(22) -#define K_BCM1480_INT_TIMER_3 _BCM1480_INT_HIGH(23) -#define K_BCM1480_INT_DM_CH_0 _BCM1480_INT_HIGH(28) -#define K_BCM1480_INT_DM_CH_1 _BCM1480_INT_HIGH(29) -#define K_BCM1480_INT_DM_CH_2 _BCM1480_INT_HIGH(30) -#define K_BCM1480_INT_DM_CH_3 _BCM1480_INT_HIGH(31) -#define K_BCM1480_INT_MAC_0 _BCM1480_INT_HIGH(36) -#define K_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_HIGH(37) -#define K_BCM1480_INT_MAC_1 _BCM1480_INT_HIGH(38) -#define K_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_HIGH(39) -#define K_BCM1480_INT_MAC_2 _BCM1480_INT_HIGH(40) -#define K_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_HIGH(41) -#define K_BCM1480_INT_MAC_3 _BCM1480_INT_HIGH(42) -#define K_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_HIGH(43) -#define K_BCM1480_INT_PMI_LOW _BCM1480_INT_HIGH(52) -#define K_BCM1480_INT_PMI_HIGH _BCM1480_INT_HIGH(53) -#define K_BCM1480_INT_PMO_LOW _BCM1480_INT_HIGH(54) -#define K_BCM1480_INT_PMO_HIGH _BCM1480_INT_HIGH(55) -#define K_BCM1480_INT_MBOX_0_0 _BCM1480_INT_HIGH(56) -#define K_BCM1480_INT_MBOX_0_1 _BCM1480_INT_HIGH(57) -#define K_BCM1480_INT_MBOX_0_2 _BCM1480_INT_HIGH(58) -#define K_BCM1480_INT_MBOX_0_3 _BCM1480_INT_HIGH(59) -#define K_BCM1480_INT_MBOX_1_0 _BCM1480_INT_HIGH(60) -#define K_BCM1480_INT_MBOX_1_1 _BCM1480_INT_HIGH(61) -#define K_BCM1480_INT_MBOX_1_2 _BCM1480_INT_HIGH(62) -#define K_BCM1480_INT_MBOX_1_3 _BCM1480_INT_HIGH(63) - -#define K_BCM1480_INT_BAD_ECC _BCM1480_INT_LOW(1) -#define K_BCM1480_INT_COR_ECC _BCM1480_INT_LOW(2) -#define K_BCM1480_INT_IO_BUS _BCM1480_INT_LOW(3) -#define K_BCM1480_INT_PERF_CNT _BCM1480_INT_LOW(4) -#define K_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_LOW(5) -#define K_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_LOW(6) -#define K_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_LOW(7) -#define K_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_LOW(8) -#define K_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_LOW(9) -#define K_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_LOW(10) -#define K_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_LOW(11) -#define K_BCM1480_INT_PCI_ERROR _BCM1480_INT_LOW(16) -#define K_BCM1480_INT_PCI_RESET _BCM1480_INT_LOW(17) -#define K_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_LOW(18) -#define K_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_LOW(19) -#define K_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_LOW(20) -#define K_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_LOW(21) -#define K_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_LOW(22) -#define K_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_LOW(23) -#define K_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_LOW(24) -#define K_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_LOW(25) -#define K_BCM1480_INT_LDT_SMI _BCM1480_INT_LOW(32) -#define K_BCM1480_INT_LDT_NMI _BCM1480_INT_LOW(33) -#define K_BCM1480_INT_LDT_INIT _BCM1480_INT_LOW(34) -#define K_BCM1480_INT_LDT_STARTUP _BCM1480_INT_LOW(35) -#define K_BCM1480_INT_LDT_EXT _BCM1480_INT_LOW(36) -#define K_BCM1480_INT_SMB_0 _BCM1480_INT_LOW(40) -#define K_BCM1480_INT_SMB_1 _BCM1480_INT_LOW(41) -#define K_BCM1480_INT_PCMCIA _BCM1480_INT_LOW(42) -#define K_BCM1480_INT_UART_0 _BCM1480_INT_LOW(44) -#define K_BCM1480_INT_UART_1 _BCM1480_INT_LOW(45) -#define K_BCM1480_INT_UART_2 _BCM1480_INT_LOW(46) -#define K_BCM1480_INT_UART_3 _BCM1480_INT_LOW(47) -#define K_BCM1480_INT_GPIO_4 _BCM1480_INT_LOW(52) -#define K_BCM1480_INT_GPIO_5 _BCM1480_INT_LOW(53) -#define K_BCM1480_INT_GPIO_6 _BCM1480_INT_LOW(54) -#define K_BCM1480_INT_GPIO_7 _BCM1480_INT_LOW(55) -#define K_BCM1480_INT_GPIO_8 _BCM1480_INT_LOW(56) -#define K_BCM1480_INT_GPIO_9 _BCM1480_INT_LOW(57) -#define K_BCM1480_INT_GPIO_10 _BCM1480_INT_LOW(58) -#define K_BCM1480_INT_GPIO_11 _BCM1480_INT_LOW(59) -#define K_BCM1480_INT_GPIO_12 _BCM1480_INT_LOW(60) -#define K_BCM1480_INT_GPIO_13 _BCM1480_INT_LOW(61) -#define K_BCM1480_INT_GPIO_14 _BCM1480_INT_LOW(62) -#define K_BCM1480_INT_GPIO_15 _BCM1480_INT_LOW(63) - -/* - * Mask values for each interrupt - */ - -#define _BCM1480_INT_MASK(w, n) _SB_MAKEMASK(w, ((n) & 0x3F)) -#define _BCM1480_INT_MASK1(n) _SB_MAKEMASK1(((n) & 0x3F)) -#define _BCM1480_INT_OFFSET(n) (((n) & 0x40) << 6) - -#define M_BCM1480_INT_CASCADE _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0)) - -#define M_BCM1480_INT_ADDR_TRAP _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP) -#define M_BCM1480_INT_GPIO_0 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0) -#define M_BCM1480_INT_GPIO_1 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1) -#define M_BCM1480_INT_GPIO_2 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2) -#define M_BCM1480_INT_GPIO_3 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3) -#define M_BCM1480_INT_PCI_INTA _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA) -#define M_BCM1480_INT_PCI_INTB _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB) -#define M_BCM1480_INT_PCI_INTC _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC) -#define M_BCM1480_INT_PCI_INTD _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD) -#define M_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0) -#define M_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1) -#define M_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2) -#define M_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3) -#define M_BCM1480_INT_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0) -#define M_BCM1480_INT_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1) -#define M_BCM1480_INT_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2) -#define M_BCM1480_INT_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3) -#define M_BCM1480_INT_DM_CH_0 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0) -#define M_BCM1480_INT_DM_CH_1 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1) -#define M_BCM1480_INT_DM_CH_2 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2) -#define M_BCM1480_INT_DM_CH_3 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3) -#define M_BCM1480_INT_MAC_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0) -#define M_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1) -#define M_BCM1480_INT_MAC_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1) -#define M_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1) -#define M_BCM1480_INT_MAC_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2) -#define M_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1) -#define M_BCM1480_INT_MAC_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3) -#define M_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1) -#define M_BCM1480_INT_PMI_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW) -#define M_BCM1480_INT_PMI_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH) -#define M_BCM1480_INT_PMO_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW) -#define M_BCM1480_INT_PMO_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH) -#define M_BCM1480_INT_MBOX_ALL _BCM1480_INT_MASK(8, K_BCM1480_INT_MBOX_0_0) -#define M_BCM1480_INT_MBOX_0_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0) -#define M_BCM1480_INT_MBOX_0_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1) -#define M_BCM1480_INT_MBOX_0_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2) -#define M_BCM1480_INT_MBOX_0_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3) -#define M_BCM1480_INT_MBOX_1_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0) -#define M_BCM1480_INT_MBOX_1_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1) -#define M_BCM1480_INT_MBOX_1_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2) -#define M_BCM1480_INT_MBOX_1_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3) -#define M_BCM1480_INT_BAD_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC) -#define M_BCM1480_INT_COR_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC) -#define M_BCM1480_INT_IO_BUS _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS) -#define M_BCM1480_INT_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT) -#define M_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT) -#define M_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE) -#define M_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE) -#define M_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0) -#define M_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1) -#define M_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2) -#define M_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3) -#define M_BCM1480_INT_PCI_ERROR _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR) -#define M_BCM1480_INT_PCI_RESET _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET) -#define M_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER) -#define M_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE) -#define M_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL) -#define M_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL) -#define M_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL) -#define M_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL) -#define M_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL) -#define M_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL) -#define M_BCM1480_INT_LDT_SMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI) -#define M_BCM1480_INT_LDT_NMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI) -#define M_BCM1480_INT_LDT_INIT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT) -#define M_BCM1480_INT_LDT_STARTUP _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP) -#define M_BCM1480_INT_LDT_EXT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT) -#define M_BCM1480_INT_SMB_0 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0) -#define M_BCM1480_INT_SMB_1 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1) -#define M_BCM1480_INT_PCMCIA _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA) -#define M_BCM1480_INT_UART_0 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0) -#define M_BCM1480_INT_UART_1 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1) -#define M_BCM1480_INT_UART_2 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2) -#define M_BCM1480_INT_UART_3 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3) -#define M_BCM1480_INT_GPIO_4 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4) -#define M_BCM1480_INT_GPIO_5 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5) -#define M_BCM1480_INT_GPIO_6 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6) -#define M_BCM1480_INT_GPIO_7 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7) -#define M_BCM1480_INT_GPIO_8 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8) -#define M_BCM1480_INT_GPIO_9 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9) -#define M_BCM1480_INT_GPIO_10 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10) -#define M_BCM1480_INT_GPIO_11 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11) -#define M_BCM1480_INT_GPIO_12 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12) -#define M_BCM1480_INT_GPIO_13 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13) -#define M_BCM1480_INT_GPIO_14 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14) -#define M_BCM1480_INT_GPIO_15 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15) - -/* - * Interrupt mappings (Table 18) - */ - -#define K_BCM1480_INT_MAP_I0 0 /* interrupt pins on processor */ -#define K_BCM1480_INT_MAP_I1 1 -#define K_BCM1480_INT_MAP_I2 2 -#define K_BCM1480_INT_MAP_I3 3 -#define K_BCM1480_INT_MAP_I4 4 -#define K_BCM1480_INT_MAP_I5 5 -#define K_BCM1480_INT_MAP_NMI 6 /* nonmaskable */ -#define K_BCM1480_INT_MAP_DINT 7 /* debug interrupt */ - -/* - * Interrupt LDT Set Register (Table 19) - */ - -#define S_BCM1480_INT_HT_INTMSG 0 -#define M_BCM1480_INT_HT_INTMSG _SB_MAKEMASK(3, S_BCM1480_INT_HT_INTMSG) -#define V_BCM1480_INT_HT_INTMSG(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTMSG) -#define G_BCM1480_INT_HT_INTMSG(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_INTMSG, M_BCM1480_INT_HT_INTMSG) - -#define K_BCM1480_INT_HT_INTMSG_FIXED 0 -#define K_BCM1480_INT_HT_INTMSG_ARBITRATED 1 -#define K_BCM1480_INT_HT_INTMSG_SMI 2 -#define K_BCM1480_INT_HT_INTMSG_NMI 3 -#define K_BCM1480_INT_HT_INTMSG_INIT 4 -#define K_BCM1480_INT_HT_INTMSG_STARTUP 5 -#define K_BCM1480_INT_HT_INTMSG_EXTINT 6 -#define K_BCM1480_INT_HT_INTMSG_RESERVED 7 - -#define M_BCM1480_INT_HT_TRIGGERMODE _SB_MAKEMASK1(3) -#define V_BCM1480_INT_HT_EDGETRIGGER 0 -#define V_BCM1480_INT_HT_LEVELTRIGGER M_BCM1480_INT_HT_TRIGGERMODE - -#define M_BCM1480_INT_HT_DESTMODE _SB_MAKEMASK1(4) -#define V_BCM1480_INT_HT_PHYSICALDEST 0 -#define V_BCM1480_INT_HT_LOGICALDEST M_BCM1480_INT_HT_DESTMODE - -#define S_BCM1480_INT_HT_INTDEST 5 -#define M_BCM1480_INT_HT_INTDEST _SB_MAKEMASK(8, S_BCM1480_INT_HT_INTDEST) -#define V_BCM1480_INT_HT_INTDEST(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTDEST) -#define G_BCM1480_INT_HT_INTDEST(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_INTDEST, M_BCM1480_INT_HT_INTDEST) - -#define S_BCM1480_INT_HT_VECTOR 13 -#define M_BCM1480_INT_HT_VECTOR _SB_MAKEMASK(8, S_BCM1480_INT_HT_VECTOR) -#define V_BCM1480_INT_HT_VECTOR(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_VECTOR) -#define G_BCM1480_INT_HT_VECTOR(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_VECTOR, M_BCM1480_INT_HT_VECTOR) - -/* - * Vector prefix (Table 4-7) - */ - -#define M_BCM1480_HTVECT_RAISE_INTLDT_HIGH 0x00 -#define M_BCM1480_HTVECT_RAISE_MBOX_0 0x40 -#define M_BCM1480_HTVECT_RAISE_INTLDT_LO 0x80 -#define M_BCM1480_HTVECT_RAISE_MBOX_1 0xC0 - -#endif /* _BCM1480_INT_H */ diff --git a/include/asm-mips/sibyte/bcm1480_l2c.h b/include/asm-mips/sibyte/bcm1480_l2c.h deleted file mode 100644 index fd75817f7ac4..000000000000 --- a/include/asm-mips/sibyte/bcm1480_l2c.h +++ /dev/null @@ -1,176 +0,0 @@ -/* ********************************************************************* - * BCM1280/BCM1480 Board Support Package - * - * L2 Cache constants and macros File: bcm1480_l2c.h - * - * This module contains constants useful for manipulating the - * level 2 cache. - * - * BCM1400 specification level: 1280-UM100-D2 (11/14/03) - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _BCM1480_L2C_H -#define _BCM1480_L2C_H - -#include "sb1250_defs.h" - -/* - * Format of level 2 cache management address (Table 55) - */ - -#define S_BCM1480_L2C_MGMT_INDEX 5 -#define M_BCM1480_L2C_MGMT_INDEX _SB_MAKEMASK(12, S_BCM1480_L2C_MGMT_INDEX) -#define V_BCM1480_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_INDEX) -#define G_BCM1480_L2C_MGMT_INDEX(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_INDEX, M_BCM1480_L2C_MGMT_INDEX) - -#define S_BCM1480_L2C_MGMT_WAY 17 -#define M_BCM1480_L2C_MGMT_WAY _SB_MAKEMASK(3, S_BCM1480_L2C_MGMT_WAY) -#define V_BCM1480_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_WAY) -#define G_BCM1480_L2C_MGMT_WAY(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_WAY, M_BCM1480_L2C_MGMT_WAY) - -#define M_BCM1480_L2C_MGMT_DIRTY _SB_MAKEMASK1(20) -#define M_BCM1480_L2C_MGMT_VALID _SB_MAKEMASK1(21) - -#define S_BCM1480_L2C_MGMT_ECC_DIAG 22 -#define M_BCM1480_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2, S_BCM1480_L2C_MGMT_ECC_DIAG) -#define V_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG) -#define G_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG, M_BCM1480_L2C_MGMT_ECC_DIAG) - -#define A_BCM1480_L2C_MGMT_TAG_BASE 0x00D0000000 - -#define BCM1480_L2C_ENTRIES_PER_WAY 4096 -#define BCM1480_L2C_NUM_WAYS 8 - - -/* - * Level 2 Cache Tag register (Table 59) - */ - -#define S_BCM1480_L2C_TAG_MBZ 0 -#define M_BCM1480_L2C_TAG_MBZ _SB_MAKEMASK(5, S_BCM1480_L2C_TAG_MBZ) - -#define S_BCM1480_L2C_TAG_INDEX 5 -#define M_BCM1480_L2C_TAG_INDEX _SB_MAKEMASK(12, S_BCM1480_L2C_TAG_INDEX) -#define V_BCM1480_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_INDEX) -#define G_BCM1480_L2C_TAG_INDEX(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_INDEX, M_BCM1480_L2C_TAG_INDEX) - -/* Note that index bit 16 is also tag bit 40 */ -#define S_BCM1480_L2C_TAG_TAG 17 -#define M_BCM1480_L2C_TAG_TAG _SB_MAKEMASK(23, S_BCM1480_L2C_TAG_TAG) -#define V_BCM1480_L2C_TAG_TAG(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_TAG) -#define G_BCM1480_L2C_TAG_TAG(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_TAG, M_BCM1480_L2C_TAG_TAG) - -#define S_BCM1480_L2C_TAG_ECC 40 -#define M_BCM1480_L2C_TAG_ECC _SB_MAKEMASK(6, S_BCM1480_L2C_TAG_ECC) -#define V_BCM1480_L2C_TAG_ECC(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_ECC) -#define G_BCM1480_L2C_TAG_ECC(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_ECC, M_BCM1480_L2C_TAG_ECC) - -#define S_BCM1480_L2C_TAG_WAY 46 -#define M_BCM1480_L2C_TAG_WAY _SB_MAKEMASK(3, S_BCM1480_L2C_TAG_WAY) -#define V_BCM1480_L2C_TAG_WAY(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_WAY) -#define G_BCM1480_L2C_TAG_WAY(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_WAY, M_BCM1480_L2C_TAG_WAY) - -#define M_BCM1480_L2C_TAG_DIRTY _SB_MAKEMASK1(49) -#define M_BCM1480_L2C_TAG_VALID _SB_MAKEMASK1(50) - -#define S_BCM1480_L2C_DATA_ECC 51 -#define M_BCM1480_L2C_DATA_ECC _SB_MAKEMASK(10, S_BCM1480_L2C_DATA_ECC) -#define V_BCM1480_L2C_DATA_ECC(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_DATA_ECC) -#define G_BCM1480_L2C_DATA_ECC(x) _SB_GETVALUE(x, S_BCM1480_L2C_DATA_ECC, M_BCM1480_L2C_DATA_ECC) - - -/* - * L2 Misc0 Value Register (Table 60) - */ - -#define S_BCM1480_L2C_MISC0_WAY_REMOTE 0 -#define M_BCM1480_L2C_MISC0_WAY_REMOTE _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_REMOTE) -#define G_BCM1480_L2C_MISC0_WAY_REMOTE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_REMOTE, M_BCM1480_L2C_MISC0_WAY_REMOTE) - -#define S_BCM1480_L2C_MISC0_WAY_LOCAL 8 -#define M_BCM1480_L2C_MISC0_WAY_LOCAL _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_LOCAL) -#define G_BCM1480_L2C_MISC0_WAY_LOCAL(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_LOCAL, M_BCM1480_L2C_MISC0_WAY_LOCAL) - -#define S_BCM1480_L2C_MISC0_WAY_ENABLE 16 -#define M_BCM1480_L2C_MISC0_WAY_ENABLE _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_ENABLE) -#define G_BCM1480_L2C_MISC0_WAY_ENABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_ENABLE, M_BCM1480_L2C_MISC0_WAY_ENABLE) - -#define S_BCM1480_L2C_MISC0_CACHE_DISABLE 24 -#define M_BCM1480_L2C_MISC0_CACHE_DISABLE _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_DISABLE) -#define G_BCM1480_L2C_MISC0_CACHE_DISABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_DISABLE, M_BCM1480_L2C_MISC0_CACHE_DISABLE) - -#define S_BCM1480_L2C_MISC0_CACHE_QUAD 26 -#define M_BCM1480_L2C_MISC0_CACHE_QUAD _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_QUAD) -#define G_BCM1480_L2C_MISC0_CACHE_QUAD(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_QUAD, M_BCM1480_L2C_MISC0_CACHE_QUAD) - -#define S_BCM1480_L2C_MISC0_MC_PRIORITY 30 -#define M_BCM1480_L2C_MISC0_MC_PRIORITY _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY) - -#define S_BCM1480_L2C_MISC0_ECC_CLEANUP 31 -#define M_BCM1480_L2C_MISC0_ECC_CLEANUP _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP) - - -/* - * L2 Misc1 Value Register (Table 60) - */ - -#define S_BCM1480_L2C_MISC1_WAY_AGENT_0 0 -#define M_BCM1480_L2C_MISC1_WAY_AGENT_0 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_0) -#define G_BCM1480_L2C_MISC1_WAY_AGENT_0(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_0, M_BCM1480_L2C_MISC1_WAY_AGENT_0) - -#define S_BCM1480_L2C_MISC1_WAY_AGENT_1 8 -#define M_BCM1480_L2C_MISC1_WAY_AGENT_1 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_1) -#define G_BCM1480_L2C_MISC1_WAY_AGENT_1(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_1, M_BCM1480_L2C_MISC1_WAY_AGENT_1) - -#define S_BCM1480_L2C_MISC1_WAY_AGENT_2 16 -#define M_BCM1480_L2C_MISC1_WAY_AGENT_2 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_2) -#define G_BCM1480_L2C_MISC1_WAY_AGENT_2(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_2, M_BCM1480_L2C_MISC1_WAY_AGENT_2) - -#define S_BCM1480_L2C_MISC1_WAY_AGENT_3 24 -#define M_BCM1480_L2C_MISC1_WAY_AGENT_3 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_3) -#define G_BCM1480_L2C_MISC1_WAY_AGENT_3(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_3, M_BCM1480_L2C_MISC1_WAY_AGENT_3) - -#define S_BCM1480_L2C_MISC1_WAY_AGENT_4 32 -#define M_BCM1480_L2C_MISC1_WAY_AGENT_4 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_4) -#define G_BCM1480_L2C_MISC1_WAY_AGENT_4(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_4, M_BCM1480_L2C_MISC1_WAY_AGENT_4) - - -/* - * L2 Misc2 Value Register (Table 60) - */ - -#define S_BCM1480_L2C_MISC2_WAY_AGENT_8 0 -#define M_BCM1480_L2C_MISC2_WAY_AGENT_8 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_8) -#define G_BCM1480_L2C_MISC2_WAY_AGENT_8(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_8, M_BCM1480_L2C_MISC2_WAY_AGENT_8) - -#define S_BCM1480_L2C_MISC2_WAY_AGENT_9 8 -#define M_BCM1480_L2C_MISC2_WAY_AGENT_9 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_9) -#define G_BCM1480_L2C_MISC2_WAY_AGENT_9(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_9, M_BCM1480_L2C_MISC2_WAY_AGENT_9) - -#define S_BCM1480_L2C_MISC2_WAY_AGENT_A 16 -#define M_BCM1480_L2C_MISC2_WAY_AGENT_A _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_A) -#define G_BCM1480_L2C_MISC2_WAY_AGENT_A(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_A, M_BCM1480_L2C_MISC2_WAY_AGENT_A) - - -#endif /* _BCM1480_L2C_H */ diff --git a/include/asm-mips/sibyte/bcm1480_mc.h b/include/asm-mips/sibyte/bcm1480_mc.h deleted file mode 100644 index f26a41a82b59..000000000000 --- a/include/asm-mips/sibyte/bcm1480_mc.h +++ /dev/null @@ -1,984 +0,0 @@ -/* ********************************************************************* - * BCM1280/BCM1480 Board Support Package - * - * Memory Controller constants File: bcm1480_mc.h - * - * This module contains constants and macros useful for - * programming the memory controller. - * - * BCM1400 specification level: 1280-UM100-D1 (11/14/03 Review Copy) - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _BCM1480_MC_H -#define _BCM1480_MC_H - -#include "sb1250_defs.h" - -/* - * Memory Channel Configuration Register (Table 81) - */ - -#define S_BCM1480_MC_INTLV0 0 -#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0) -#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0) -#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0) -#define V_BCM1480_MC_INTLV0_DEFAULT V_BCM1480_MC_INTLV0(0) - -#define S_BCM1480_MC_INTLV1 8 -#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1) -#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1) -#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1) -#define V_BCM1480_MC_INTLV1_DEFAULT V_BCM1480_MC_INTLV1(0) - -#define S_BCM1480_MC_INTLV2 16 -#define M_BCM1480_MC_INTLV2 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV2) -#define V_BCM1480_MC_INTLV2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV2) -#define G_BCM1480_MC_INTLV2(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV2, M_BCM1480_MC_INTLV2) -#define V_BCM1480_MC_INTLV2_DEFAULT V_BCM1480_MC_INTLV2(0) - -#define S_BCM1480_MC_CS_MODE 32 -#define M_BCM1480_MC_CS_MODE _SB_MAKEMASK(8, S_BCM1480_MC_CS_MODE) -#define V_BCM1480_MC_CS_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS_MODE) -#define G_BCM1480_MC_CS_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_CS_MODE, M_BCM1480_MC_CS_MODE) -#define V_BCM1480_MC_CS_MODE_DEFAULT V_BCM1480_MC_CS_MODE(0) - -#define V_BCM1480_MC_CONFIG_DEFAULT (V_BCM1480_MC_INTLV0_DEFAULT | \ - V_BCM1480_MC_INTLV1_DEFAULT | \ - V_BCM1480_MC_INTLV2_DEFAULT | \ - V_BCM1480_MC_CS_MODE_DEFAULT) - -#define K_BCM1480_MC_CS01_MODE 0x03 -#define K_BCM1480_MC_CS02_MODE 0x05 -#define K_BCM1480_MC_CS0123_MODE 0x0F -#define K_BCM1480_MC_CS0246_MODE 0x55 -#define K_BCM1480_MC_CS0145_MODE 0x33 -#define K_BCM1480_MC_CS0167_MODE 0xC3 -#define K_BCM1480_MC_CSFULL_MODE 0xFF - -/* - * Chip Select Start Address Register (Table 82) - */ - -#define S_BCM1480_MC_CS0_START 0 -#define M_BCM1480_MC_CS0_START _SB_MAKEMASK(12, S_BCM1480_MC_CS0_START) -#define V_BCM1480_MC_CS0_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_START) -#define G_BCM1480_MC_CS0_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0_START, M_BCM1480_MC_CS0_START) - -#define S_BCM1480_MC_CS1_START 16 -#define M_BCM1480_MC_CS1_START _SB_MAKEMASK(12, S_BCM1480_MC_CS1_START) -#define V_BCM1480_MC_CS1_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_START) -#define G_BCM1480_MC_CS1_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS1_START, M_BCM1480_MC_CS1_START) - -#define S_BCM1480_MC_CS2_START 32 -#define M_BCM1480_MC_CS2_START _SB_MAKEMASK(12, S_BCM1480_MC_CS2_START) -#define V_BCM1480_MC_CS2_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_START) -#define G_BCM1480_MC_CS2_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS2_START, M_BCM1480_MC_CS2_START) - -#define S_BCM1480_MC_CS3_START 48 -#define M_BCM1480_MC_CS3_START _SB_MAKEMASK(12, S_BCM1480_MC_CS3_START) -#define V_BCM1480_MC_CS3_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_START) -#define G_BCM1480_MC_CS3_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS3_START, M_BCM1480_MC_CS3_START) - -/* - * Chip Select End Address Register (Table 83) - */ - -#define S_BCM1480_MC_CS0_END 0 -#define M_BCM1480_MC_CS0_END _SB_MAKEMASK(12, S_BCM1480_MC_CS0_END) -#define V_BCM1480_MC_CS0_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_END) -#define G_BCM1480_MC_CS0_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0_END, M_BCM1480_MC_CS0_END) - -#define S_BCM1480_MC_CS1_END 16 -#define M_BCM1480_MC_CS1_END _SB_MAKEMASK(12, S_BCM1480_MC_CS1_END) -#define V_BCM1480_MC_CS1_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_END) -#define G_BCM1480_MC_CS1_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS1_END, M_BCM1480_MC_CS1_END) - -#define S_BCM1480_MC_CS2_END 32 -#define M_BCM1480_MC_CS2_END _SB_MAKEMASK(12, S_BCM1480_MC_CS2_END) -#define V_BCM1480_MC_CS2_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_END) -#define G_BCM1480_MC_CS2_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS2_END, M_BCM1480_MC_CS2_END) - -#define S_BCM1480_MC_CS3_END 48 -#define M_BCM1480_MC_CS3_END _SB_MAKEMASK(12, S_BCM1480_MC_CS3_END) -#define V_BCM1480_MC_CS3_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_END) -#define G_BCM1480_MC_CS3_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS3_END, M_BCM1480_MC_CS3_END) - -/* - * Row Address Bit Select Register 0 (Table 84) - */ - -#define S_BCM1480_MC_ROW00 0 -#define M_BCM1480_MC_ROW00 _SB_MAKEMASK(6, S_BCM1480_MC_ROW00) -#define V_BCM1480_MC_ROW00(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW00) -#define G_BCM1480_MC_ROW00(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW00, M_BCM1480_MC_ROW00) - -#define S_BCM1480_MC_ROW01 8 -#define M_BCM1480_MC_ROW01 _SB_MAKEMASK(6, S_BCM1480_MC_ROW01) -#define V_BCM1480_MC_ROW01(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW01) -#define G_BCM1480_MC_ROW01(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW01, M_BCM1480_MC_ROW01) - -#define S_BCM1480_MC_ROW02 16 -#define M_BCM1480_MC_ROW02 _SB_MAKEMASK(6, S_BCM1480_MC_ROW02) -#define V_BCM1480_MC_ROW02(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW02) -#define G_BCM1480_MC_ROW02(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW02, M_BCM1480_MC_ROW02) - -#define S_BCM1480_MC_ROW03 24 -#define M_BCM1480_MC_ROW03 _SB_MAKEMASK(6, S_BCM1480_MC_ROW03) -#define V_BCM1480_MC_ROW03(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW03) -#define G_BCM1480_MC_ROW03(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW03, M_BCM1480_MC_ROW03) - -#define S_BCM1480_MC_ROW04 32 -#define M_BCM1480_MC_ROW04 _SB_MAKEMASK(6, S_BCM1480_MC_ROW04) -#define V_BCM1480_MC_ROW04(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW04) -#define G_BCM1480_MC_ROW04(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW04, M_BCM1480_MC_ROW04) - -#define S_BCM1480_MC_ROW05 40 -#define M_BCM1480_MC_ROW05 _SB_MAKEMASK(6, S_BCM1480_MC_ROW05) -#define V_BCM1480_MC_ROW05(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW05) -#define G_BCM1480_MC_ROW05(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW05, M_BCM1480_MC_ROW05) - -#define S_BCM1480_MC_ROW06 48 -#define M_BCM1480_MC_ROW06 _SB_MAKEMASK(6, S_BCM1480_MC_ROW06) -#define V_BCM1480_MC_ROW06(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW06) -#define G_BCM1480_MC_ROW06(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW06, M_BCM1480_MC_ROW06) - -#define S_BCM1480_MC_ROW07 56 -#define M_BCM1480_MC_ROW07 _SB_MAKEMASK(6, S_BCM1480_MC_ROW07) -#define V_BCM1480_MC_ROW07(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW07) -#define G_BCM1480_MC_ROW07(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW07, M_BCM1480_MC_ROW07) - -/* - * Row Address Bit Select Register 1 (Table 85) - */ - -#define S_BCM1480_MC_ROW08 0 -#define M_BCM1480_MC_ROW08 _SB_MAKEMASK(6, S_BCM1480_MC_ROW08) -#define V_BCM1480_MC_ROW08(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW08) -#define G_BCM1480_MC_ROW08(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW08, M_BCM1480_MC_ROW08) - -#define S_BCM1480_MC_ROW09 8 -#define M_BCM1480_MC_ROW09 _SB_MAKEMASK(6, S_BCM1480_MC_ROW09) -#define V_BCM1480_MC_ROW09(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW09) -#define G_BCM1480_MC_ROW09(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW09, M_BCM1480_MC_ROW09) - -#define S_BCM1480_MC_ROW10 16 -#define M_BCM1480_MC_ROW10 _SB_MAKEMASK(6, S_BCM1480_MC_ROW10) -#define V_BCM1480_MC_ROW10(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW10) -#define G_BCM1480_MC_ROW10(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW10, M_BCM1480_MC_ROW10) - -#define S_BCM1480_MC_ROW11 24 -#define M_BCM1480_MC_ROW11 _SB_MAKEMASK(6, S_BCM1480_MC_ROW11) -#define V_BCM1480_MC_ROW11(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW11) -#define G_BCM1480_MC_ROW11(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW11, M_BCM1480_MC_ROW11) - -#define S_BCM1480_MC_ROW12 32 -#define M_BCM1480_MC_ROW12 _SB_MAKEMASK(6, S_BCM1480_MC_ROW12) -#define V_BCM1480_MC_ROW12(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW12) -#define G_BCM1480_MC_ROW12(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW12, M_BCM1480_MC_ROW12) - -#define S_BCM1480_MC_ROW13 40 -#define M_BCM1480_MC_ROW13 _SB_MAKEMASK(6, S_BCM1480_MC_ROW13) -#define V_BCM1480_MC_ROW13(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW13) -#define G_BCM1480_MC_ROW13(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW13, M_BCM1480_MC_ROW13) - -#define S_BCM1480_MC_ROW14 48 -#define M_BCM1480_MC_ROW14 _SB_MAKEMASK(6, S_BCM1480_MC_ROW14) -#define V_BCM1480_MC_ROW14(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW14) -#define G_BCM1480_MC_ROW14(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW14, M_BCM1480_MC_ROW14) - -#define K_BCM1480_MC_ROWX_BIT_SPACING 8 - -/* - * Column Address Bit Select Register 0 (Table 86) - */ - -#define S_BCM1480_MC_COL00 0 -#define M_BCM1480_MC_COL00 _SB_MAKEMASK(6, S_BCM1480_MC_COL00) -#define V_BCM1480_MC_COL00(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL00) -#define G_BCM1480_MC_COL00(x) _SB_GETVALUE(x, S_BCM1480_MC_COL00, M_BCM1480_MC_COL00) - -#define S_BCM1480_MC_COL01 8 -#define M_BCM1480_MC_COL01 _SB_MAKEMASK(6, S_BCM1480_MC_COL01) -#define V_BCM1480_MC_COL01(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL01) -#define G_BCM1480_MC_COL01(x) _SB_GETVALUE(x, S_BCM1480_MC_COL01, M_BCM1480_MC_COL01) - -#define S_BCM1480_MC_COL02 16 -#define M_BCM1480_MC_COL02 _SB_MAKEMASK(6, S_BCM1480_MC_COL02) -#define V_BCM1480_MC_COL02(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL02) -#define G_BCM1480_MC_COL02(x) _SB_GETVALUE(x, S_BCM1480_MC_COL02, M_BCM1480_MC_COL02) - -#define S_BCM1480_MC_COL03 24 -#define M_BCM1480_MC_COL03 _SB_MAKEMASK(6, S_BCM1480_MC_COL03) -#define V_BCM1480_MC_COL03(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL03) -#define G_BCM1480_MC_COL03(x) _SB_GETVALUE(x, S_BCM1480_MC_COL03, M_BCM1480_MC_COL03) - -#define S_BCM1480_MC_COL04 32 -#define M_BCM1480_MC_COL04 _SB_MAKEMASK(6, S_BCM1480_MC_COL04) -#define V_BCM1480_MC_COL04(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL04) -#define G_BCM1480_MC_COL04(x) _SB_GETVALUE(x, S_BCM1480_MC_COL04, M_BCM1480_MC_COL04) - -#define S_BCM1480_MC_COL05 40 -#define M_BCM1480_MC_COL05 _SB_MAKEMASK(6, S_BCM1480_MC_COL05) -#define V_BCM1480_MC_COL05(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL05) -#define G_BCM1480_MC_COL05(x) _SB_GETVALUE(x, S_BCM1480_MC_COL05, M_BCM1480_MC_COL05) - -#define S_BCM1480_MC_COL06 48 -#define M_BCM1480_MC_COL06 _SB_MAKEMASK(6, S_BCM1480_MC_COL06) -#define V_BCM1480_MC_COL06(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL06) -#define G_BCM1480_MC_COL06(x) _SB_GETVALUE(x, S_BCM1480_MC_COL06, M_BCM1480_MC_COL06) - -#define S_BCM1480_MC_COL07 56 -#define M_BCM1480_MC_COL07 _SB_MAKEMASK(6, S_BCM1480_MC_COL07) -#define V_BCM1480_MC_COL07(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL07) -#define G_BCM1480_MC_COL07(x) _SB_GETVALUE(x, S_BCM1480_MC_COL07, M_BCM1480_MC_COL07) - -/* - * Column Address Bit Select Register 1 (Table 87) - */ - -#define S_BCM1480_MC_COL08 0 -#define M_BCM1480_MC_COL08 _SB_MAKEMASK(6, S_BCM1480_MC_COL08) -#define V_BCM1480_MC_COL08(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL08) -#define G_BCM1480_MC_COL08(x) _SB_GETVALUE(x, S_BCM1480_MC_COL08, M_BCM1480_MC_COL08) - -#define S_BCM1480_MC_COL09 8 -#define M_BCM1480_MC_COL09 _SB_MAKEMASK(6, S_BCM1480_MC_COL09) -#define V_BCM1480_MC_COL09(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL09) -#define G_BCM1480_MC_COL09(x) _SB_GETVALUE(x, S_BCM1480_MC_COL09, M_BCM1480_MC_COL09) - -#define S_BCM1480_MC_COL10 16 /* not a valid position, must be prog as 0 */ - -#define S_BCM1480_MC_COL11 24 -#define M_BCM1480_MC_COL11 _SB_MAKEMASK(6, S_BCM1480_MC_COL11) -#define V_BCM1480_MC_COL11(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL11) -#define G_BCM1480_MC_COL11(x) _SB_GETVALUE(x, S_BCM1480_MC_COL11, M_BCM1480_MC_COL11) - -#define S_BCM1480_MC_COL12 32 -#define M_BCM1480_MC_COL12 _SB_MAKEMASK(6, S_BCM1480_MC_COL12) -#define V_BCM1480_MC_COL12(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL12) -#define G_BCM1480_MC_COL12(x) _SB_GETVALUE(x, S_BCM1480_MC_COL12, M_BCM1480_MC_COL12) - -#define S_BCM1480_MC_COL13 40 -#define M_BCM1480_MC_COL13 _SB_MAKEMASK(6, S_BCM1480_MC_COL13) -#define V_BCM1480_MC_COL13(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL13) -#define G_BCM1480_MC_COL13(x) _SB_GETVALUE(x, S_BCM1480_MC_COL13, M_BCM1480_MC_COL13) - -#define S_BCM1480_MC_COL14 48 -#define M_BCM1480_MC_COL14 _SB_MAKEMASK(6, S_BCM1480_MC_COL14) -#define V_BCM1480_MC_COL14(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL14) -#define G_BCM1480_MC_COL14(x) _SB_GETVALUE(x, S_BCM1480_MC_COL14, M_BCM1480_MC_COL14) - -#define K_BCM1480_MC_COLX_BIT_SPACING 8 - -/* - * CS0 and CS1 Bank Address Bit Select Register (Table 88) - */ - -#define S_BCM1480_MC_CS01_BANK0 0 -#define M_BCM1480_MC_CS01_BANK0 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK0) -#define V_BCM1480_MC_CS01_BANK0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK0) -#define G_BCM1480_MC_CS01_BANK0(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK0, M_BCM1480_MC_CS01_BANK0) - -#define S_BCM1480_MC_CS01_BANK1 8 -#define M_BCM1480_MC_CS01_BANK1 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK1) -#define V_BCM1480_MC_CS01_BANK1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK1) -#define G_BCM1480_MC_CS01_BANK1(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK1, M_BCM1480_MC_CS01_BANK1) - -#define S_BCM1480_MC_CS01_BANK2 16 -#define M_BCM1480_MC_CS01_BANK2 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK2) -#define V_BCM1480_MC_CS01_BANK2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK2) -#define G_BCM1480_MC_CS01_BANK2(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK2, M_BCM1480_MC_CS01_BANK2) - -/* - * CS2 and CS3 Bank Address Bit Select Register (Table 89) - */ - -#define S_BCM1480_MC_CS23_BANK0 0 -#define M_BCM1480_MC_CS23_BANK0 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK0) -#define V_BCM1480_MC_CS23_BANK0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK0) -#define G_BCM1480_MC_CS23_BANK0(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK0, M_BCM1480_MC_CS23_BANK0) - -#define S_BCM1480_MC_CS23_BANK1 8 -#define M_BCM1480_MC_CS23_BANK1 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK1) -#define V_BCM1480_MC_CS23_BANK1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK1) -#define G_BCM1480_MC_CS23_BANK1(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK1, M_BCM1480_MC_CS23_BANK1) - -#define S_BCM1480_MC_CS23_BANK2 16 -#define M_BCM1480_MC_CS23_BANK2 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK2) -#define V_BCM1480_MC_CS23_BANK2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK2) -#define G_BCM1480_MC_CS23_BANK2(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK2, M_BCM1480_MC_CS23_BANK2) - -#define K_BCM1480_MC_CSXX_BANKX_BIT_SPACING 8 - -/* - * DRAM Command Register (Table 90) - */ - -#define S_BCM1480_MC_COMMAND 0 -#define M_BCM1480_MC_COMMAND _SB_MAKEMASK(4, S_BCM1480_MC_COMMAND) -#define V_BCM1480_MC_COMMAND(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COMMAND) -#define G_BCM1480_MC_COMMAND(x) _SB_GETVALUE(x, S_BCM1480_MC_COMMAND, M_BCM1480_MC_COMMAND) - -#define K_BCM1480_MC_COMMAND_EMRS 0 -#define K_BCM1480_MC_COMMAND_MRS 1 -#define K_BCM1480_MC_COMMAND_PRE 2 -#define K_BCM1480_MC_COMMAND_AR 3 -#define K_BCM1480_MC_COMMAND_SETRFSH 4 -#define K_BCM1480_MC_COMMAND_CLRRFSH 5 -#define K_BCM1480_MC_COMMAND_SETPWRDN 6 -#define K_BCM1480_MC_COMMAND_CLRPWRDN 7 - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define K_BCM1480_MC_COMMAND_EMRS2 8 -#define K_BCM1480_MC_COMMAND_EMRS3 9 -#define K_BCM1480_MC_COMMAND_ENABLE_MCLK 10 -#define K_BCM1480_MC_COMMAND_DISABLE_MCLK 11 -#endif - -#define V_BCM1480_MC_COMMAND_EMRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS) -#define V_BCM1480_MC_COMMAND_MRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS) -#define V_BCM1480_MC_COMMAND_PRE V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE) -#define V_BCM1480_MC_COMMAND_AR V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR) -#define V_BCM1480_MC_COMMAND_SETRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH) -#define V_BCM1480_MC_COMMAND_CLRRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH) -#define V_BCM1480_MC_COMMAND_SETPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN) -#define V_BCM1480_MC_COMMAND_CLRPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN) - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define V_BCM1480_MC_COMMAND_EMRS2 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2) -#define V_BCM1480_MC_COMMAND_EMRS3 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3) -#define V_BCM1480_MC_COMMAND_ENABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_ENABLE_MCLK) -#define V_BCM1480_MC_COMMAND_DISABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_DISABLE_MCLK) -#endif - -#define S_BCM1480_MC_CS0 4 -#define M_BCM1480_MC_CS0 _SB_MAKEMASK1(4) -#define M_BCM1480_MC_CS1 _SB_MAKEMASK1(5) -#define M_BCM1480_MC_CS2 _SB_MAKEMASK1(6) -#define M_BCM1480_MC_CS3 _SB_MAKEMASK1(7) -#define M_BCM1480_MC_CS4 _SB_MAKEMASK1(8) -#define M_BCM1480_MC_CS5 _SB_MAKEMASK1(9) -#define M_BCM1480_MC_CS6 _SB_MAKEMASK1(10) -#define M_BCM1480_MC_CS7 _SB_MAKEMASK1(11) - -#define M_BCM1480_MC_CS _SB_MAKEMASK(8, S_BCM1480_MC_CS0) -#define V_BCM1480_MC_CS(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0) -#define G_BCM1480_MC_CS(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0, M_BCM1480_MC_CS0) - -#define M_BCM1480_MC_CMD_ACTIVE _SB_MAKEMASK1(16) - -/* - * DRAM Mode Register (Table 91) - */ - -#define S_BCM1480_MC_EMODE 0 -#define M_BCM1480_MC_EMODE _SB_MAKEMASK(15, S_BCM1480_MC_EMODE) -#define V_BCM1480_MC_EMODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_EMODE) -#define G_BCM1480_MC_EMODE(x) _SB_GETVALUE(x, S_BCM1480_MC_EMODE, M_BCM1480_MC_EMODE) -#define V_BCM1480_MC_EMODE_DEFAULT V_BCM1480_MC_EMODE(0) - -#define S_BCM1480_MC_MODE 16 -#define M_BCM1480_MC_MODE _SB_MAKEMASK(15, S_BCM1480_MC_MODE) -#define V_BCM1480_MC_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_MODE) -#define G_BCM1480_MC_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_MODE, M_BCM1480_MC_MODE) -#define V_BCM1480_MC_MODE_DEFAULT V_BCM1480_MC_MODE(0) - -#define S_BCM1480_MC_DRAM_TYPE 32 -#define M_BCM1480_MC_DRAM_TYPE _SB_MAKEMASK(4, S_BCM1480_MC_DRAM_TYPE) -#define V_BCM1480_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DRAM_TYPE) -#define G_BCM1480_MC_DRAM_TYPE(x) _SB_GETVALUE(x, S_BCM1480_MC_DRAM_TYPE, M_BCM1480_MC_DRAM_TYPE) - -#define K_BCM1480_MC_DRAM_TYPE_JEDEC 0 -#define K_BCM1480_MC_DRAM_TYPE_FCRAM 1 - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define K_BCM1480_MC_DRAM_TYPE_DDR2 2 -#endif - -#define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1 0 - -#define V_BCM1480_MC_DRAM_TYPE_JEDEC V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC) -#define V_BCM1480_MC_DRAM_TYPE_FCRAM V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM) - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define V_BCM1480_MC_DRAM_TYPE_DDR2 V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_DDR2) -#endif - -#define M_BCM1480_MC_GANGED _SB_MAKEMASK1(36) -#define M_BCM1480_MC_BY9_INTF _SB_MAKEMASK1(37) -#define M_BCM1480_MC_FORCE_ECC64 _SB_MAKEMASK1(38) -#define M_BCM1480_MC_ECC_DISABLE _SB_MAKEMASK1(39) - -#define S_BCM1480_MC_PG_POLICY 40 -#define M_BCM1480_MC_PG_POLICY _SB_MAKEMASK(2, S_BCM1480_MC_PG_POLICY) -#define V_BCM1480_MC_PG_POLICY(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PG_POLICY) -#define G_BCM1480_MC_PG_POLICY(x) _SB_GETVALUE(x, S_BCM1480_MC_PG_POLICY, M_BCM1480_MC_PG_POLICY) - -#define K_BCM1480_MC_PG_POLICY_CLOSED 0 -#define K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK 1 - -#define V_BCM1480_MC_PG_POLICY_CLOSED V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED) -#define V_BCM1480_MC_PG_POLICY_CAS_TIME_CHK V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK) - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define M_BCM1480_MC_2T_CMD _SB_MAKEMASK1(42) -#define M_BCM1480_MC_ECC_COR_DIS _SB_MAKEMASK1(43) -#endif - -#define V_BCM1480_MC_DRAMMODE_DEFAULT V_BCM1480_MC_EMODE_DEFAULT | V_BCM1480_MC_MODE_DEFAULT | V_BCM1480_MC_DRAM_TYPE_JEDEC | \ - V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK) - -/* - * Memory Clock Configuration Register (Table 92) - */ - -#define S_BCM1480_MC_CLK_RATIO 0 -#define M_BCM1480_MC_CLK_RATIO _SB_MAKEMASK(6, S_BCM1480_MC_CLK_RATIO) -#define V_BCM1480_MC_CLK_RATIO(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CLK_RATIO) -#define G_BCM1480_MC_CLK_RATIO(x) _SB_GETVALUE(x, S_BCM1480_MC_CLK_RATIO, M_BCM1480_MC_CLK_RATIO) - -#define V_BCM1480_MC_CLK_RATIO_DEFAULT V_BCM1480_MC_CLK_RATIO(10) - -#define S_BCM1480_MC_REF_RATE 8 -#define M_BCM1480_MC_REF_RATE _SB_MAKEMASK(8, S_BCM1480_MC_REF_RATE) -#define V_BCM1480_MC_REF_RATE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_REF_RATE) -#define G_BCM1480_MC_REF_RATE(x) _SB_GETVALUE(x, S_BCM1480_MC_REF_RATE, M_BCM1480_MC_REF_RATE) - -#define K_BCM1480_MC_REF_RATE_100MHz 0x31 -#define K_BCM1480_MC_REF_RATE_200MHz 0x62 -#define K_BCM1480_MC_REF_RATE_400MHz 0xC4 - -#define V_BCM1480_MC_REF_RATE_100MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz) -#define V_BCM1480_MC_REF_RATE_200MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz) -#define V_BCM1480_MC_REF_RATE_400MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz) -#define V_BCM1480_MC_REF_RATE_DEFAULT V_BCM1480_MC_REF_RATE_400MHz - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define M_BCM1480_MC_AUTO_REF_DIS _SB_MAKEMASK1(16) -#endif - -/* - * ODT Register (Table 99) - */ - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define M_BCM1480_MC_RD_ODT0_CS0 _SB_MAKEMASK1(0) -#define M_BCM1480_MC_RD_ODT0_CS2 _SB_MAKEMASK1(1) -#define M_BCM1480_MC_RD_ODT0_CS4 _SB_MAKEMASK1(2) -#define M_BCM1480_MC_RD_ODT0_CS6 _SB_MAKEMASK1(3) -#define M_BCM1480_MC_WR_ODT0_CS0 _SB_MAKEMASK1(4) -#define M_BCM1480_MC_WR_ODT0_CS2 _SB_MAKEMASK1(5) -#define M_BCM1480_MC_WR_ODT0_CS4 _SB_MAKEMASK1(6) -#define M_BCM1480_MC_WR_ODT0_CS6 _SB_MAKEMASK1(7) -#define M_BCM1480_MC_RD_ODT2_CS0 _SB_MAKEMASK1(8) -#define M_BCM1480_MC_RD_ODT2_CS2 _SB_MAKEMASK1(9) -#define M_BCM1480_MC_RD_ODT2_CS4 _SB_MAKEMASK1(10) -#define M_BCM1480_MC_RD_ODT2_CS6 _SB_MAKEMASK1(11) -#define M_BCM1480_MC_WR_ODT2_CS0 _SB_MAKEMASK1(12) -#define M_BCM1480_MC_WR_ODT2_CS2 _SB_MAKEMASK1(13) -#define M_BCM1480_MC_WR_ODT2_CS4 _SB_MAKEMASK1(14) -#define M_BCM1480_MC_WR_ODT2_CS6 _SB_MAKEMASK1(15) -#define M_BCM1480_MC_RD_ODT4_CS0 _SB_MAKEMASK1(16) -#define M_BCM1480_MC_RD_ODT4_CS2 _SB_MAKEMASK1(17) -#define M_BCM1480_MC_RD_ODT4_CS4 _SB_MAKEMASK1(18) -#define M_BCM1480_MC_RD_ODT4_CS6 _SB_MAKEMASK1(19) -#define M_BCM1480_MC_WR_ODT4_CS0 _SB_MAKEMASK1(20) -#define M_BCM1480_MC_WR_ODT4_CS2 _SB_MAKEMASK1(21) -#define M_BCM1480_MC_WR_ODT4_CS4 _SB_MAKEMASK1(22) -#define M_BCM1480_MC_WR_ODT4_CS6 _SB_MAKEMASK1(23) -#define M_BCM1480_MC_RD_ODT6_CS0 _SB_MAKEMASK1(24) -#define M_BCM1480_MC_RD_ODT6_CS2 _SB_MAKEMASK1(25) -#define M_BCM1480_MC_RD_ODT6_CS4 _SB_MAKEMASK1(26) -#define M_BCM1480_MC_RD_ODT6_CS6 _SB_MAKEMASK1(27) -#define M_BCM1480_MC_WR_ODT6_CS0 _SB_MAKEMASK1(28) -#define M_BCM1480_MC_WR_ODT6_CS2 _SB_MAKEMASK1(29) -#define M_BCM1480_MC_WR_ODT6_CS4 _SB_MAKEMASK1(30) -#define M_BCM1480_MC_WR_ODT6_CS6 _SB_MAKEMASK1(31) - -#define M_BCM1480_MC_CS_ODD_ODT_EN _SB_MAKEMASK1(32) - -#define S_BCM1480_MC_ODT0 0 -#define M_BCM1480_MC_ODT0 _SB_MAKEMASK(8, S_BCM1480_MC_ODT0) -#define V_BCM1480_MC_ODT0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT0) - -#define S_BCM1480_MC_ODT2 8 -#define M_BCM1480_MC_ODT2 _SB_MAKEMASK(8, S_BCM1480_MC_ODT2) -#define V_BCM1480_MC_ODT2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT2) - -#define S_BCM1480_MC_ODT4 16 -#define M_BCM1480_MC_ODT4 _SB_MAKEMASK(8, S_BCM1480_MC_ODT4) -#define V_BCM1480_MC_ODT4(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT4) - -#define S_BCM1480_MC_ODT6 24 -#define M_BCM1480_MC_ODT6 _SB_MAKEMASK(8, S_BCM1480_MC_ODT6) -#define V_BCM1480_MC_ODT6(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT6) -#endif - -/* - * Memory DLL Configuration Register (Table 93) - */ - -#define S_BCM1480_MC_ADDR_COARSE_ADJ 0 -#define M_BCM1480_MC_ADDR_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_ADDR_COARSE_ADJ) -#define V_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ) -#define G_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ, M_BCM1480_MC_ADDR_COARSE_ADJ) -#define V_BCM1480_MC_ADDR_COARSE_ADJ_DEFAULT V_BCM1480_MC_ADDR_COARSE_ADJ(0x0) - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_ADDR_FREQ_RANGE 8 -#define M_BCM1480_MC_ADDR_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FREQ_RANGE) -#define V_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE) -#define G_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE, M_BCM1480_MC_ADDR_FREQ_RANGE) -#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT V_BCM1480_MC_ADDR_FREQ_RANGE(0x4) -#endif - -#define S_BCM1480_MC_ADDR_FINE_ADJ 8 -#define M_BCM1480_MC_ADDR_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FINE_ADJ) -#define V_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ) -#define G_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ, M_BCM1480_MC_ADDR_FINE_ADJ) -#define V_BCM1480_MC_ADDR_FINE_ADJ_DEFAULT V_BCM1480_MC_ADDR_FINE_ADJ(0x8) - -#define S_BCM1480_MC_DQI_COARSE_ADJ 16 -#define M_BCM1480_MC_DQI_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_DQI_COARSE_ADJ) -#define V_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ) -#define G_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ, M_BCM1480_MC_DQI_COARSE_ADJ) -#define V_BCM1480_MC_DQI_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQI_COARSE_ADJ(0x0) - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_DQI_FREQ_RANGE 24 -#define M_BCM1480_MC_DQI_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FREQ_RANGE) -#define V_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE) -#define G_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE, M_BCM1480_MC_DQI_FREQ_RANGE) -#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQI_FREQ_RANGE(0x4) -#endif - -#define S_BCM1480_MC_DQI_FINE_ADJ 24 -#define M_BCM1480_MC_DQI_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FINE_ADJ) -#define V_BCM1480_MC_DQI_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ) -#define G_BCM1480_MC_DQI_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ, M_BCM1480_MC_DQI_FINE_ADJ) -#define V_BCM1480_MC_DQI_FINE_ADJ_DEFAULT V_BCM1480_MC_DQI_FINE_ADJ(0x8) - -#define S_BCM1480_MC_DQO_COARSE_ADJ 32 -#define M_BCM1480_MC_DQO_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_DQO_COARSE_ADJ) -#define V_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ) -#define G_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ, M_BCM1480_MC_DQO_COARSE_ADJ) -#define V_BCM1480_MC_DQO_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQO_COARSE_ADJ(0x0) - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_DQO_FREQ_RANGE 40 -#define M_BCM1480_MC_DQO_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FREQ_RANGE) -#define V_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE) -#define G_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE, M_BCM1480_MC_DQO_FREQ_RANGE) -#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQO_FREQ_RANGE(0x4) -#endif - -#define S_BCM1480_MC_DQO_FINE_ADJ 40 -#define M_BCM1480_MC_DQO_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FINE_ADJ) -#define V_BCM1480_MC_DQO_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ) -#define G_BCM1480_MC_DQO_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ, M_BCM1480_MC_DQO_FINE_ADJ) -#define V_BCM1480_MC_DQO_FINE_ADJ_DEFAULT V_BCM1480_MC_DQO_FINE_ADJ(0x8) - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_DLL_PDSEL 44 -#define M_BCM1480_MC_DLL_PDSEL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_PDSEL) -#define V_BCM1480_MC_DLL_PDSEL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_PDSEL) -#define G_BCM1480_MC_DLL_PDSEL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_PDSEL, M_BCM1480_MC_DLL_PDSEL) -#define V_BCM1480_MC_DLL_DEFAULT_PDSEL V_BCM1480_MC_DLL_PDSEL(0x0) - -#define M_BCM1480_MC_DLL_REGBYPASS _SB_MAKEMASK1(46) -#define M_BCM1480_MC_DQO_SHIFT _SB_MAKEMASK1(47) -#endif - -#define S_BCM1480_MC_DLL_DEFAULT 48 -#define M_BCM1480_MC_DLL_DEFAULT _SB_MAKEMASK(6, S_BCM1480_MC_DLL_DEFAULT) -#define V_BCM1480_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_DEFAULT) -#define G_BCM1480_MC_DLL_DEFAULT(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_DEFAULT, M_BCM1480_MC_DLL_DEFAULT) -#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT V_BCM1480_MC_DLL_DEFAULT(0x10) - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_DLL_REGCTRL 54 -#define M_BCM1480_MC_DLL_REGCTRL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_REGCTRL) -#define V_BCM1480_MC_DLL_REGCTRL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_REGCTRL) -#define G_BCM1480_MC_DLL_REGCTRL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_REGCTRL, M_BCM1480_MC_DLL_REGCTRL) -#define V_BCM1480_MC_DLL_DEFAULT_REGCTRL V_BCM1480_MC_DLL_REGCTRL(0x0) -#endif - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_DLL_FREQ_RANGE 56 -#define M_BCM1480_MC_DLL_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DLL_FREQ_RANGE) -#define V_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE) -#define G_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE, M_BCM1480_MC_DLL_FREQ_RANGE) -#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT V_BCM1480_MC_DLL_FREQ_RANGE(0x4) -#endif - -#define S_BCM1480_MC_DLL_STEP_SIZE 56 -#define M_BCM1480_MC_DLL_STEP_SIZE _SB_MAKEMASK(4, S_BCM1480_MC_DLL_STEP_SIZE) -#define V_BCM1480_MC_DLL_STEP_SIZE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE) -#define G_BCM1480_MC_DLL_STEP_SIZE(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE, M_BCM1480_MC_DLL_STEP_SIZE) -#define V_BCM1480_MC_DLL_STEP_SIZE_DEFAULT V_BCM1480_MC_DLL_STEP_SIZE(0x8) - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_DLL_BGCTRL 60 -#define M_BCM1480_MC_DLL_BGCTRL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_BGCTRL) -#define V_BCM1480_MC_DLL_BGCTRL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_BGCTRL) -#define G_BCM1480_MC_DLL_BGCTRL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_BGCTRL, M_BCM1480_MC_DLL_BGCTRL) -#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL V_BCM1480_MC_DLL_BGCTRL(0x0) -#endif - -#define M_BCM1480_MC_DLL_BYPASS _SB_MAKEMASK1(63) - -/* - * Memory Drive Configuration Register (Table 94) - */ - -#define S_BCM1480_MC_RTT_BYP_PULLDOWN 0 -#define M_BCM1480_MC_RTT_BYP_PULLDOWN _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLDOWN) -#define V_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN) -#define G_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN, M_BCM1480_MC_RTT_BYP_PULLDOWN) - -#define S_BCM1480_MC_RTT_BYP_PULLUP 6 -#define M_BCM1480_MC_RTT_BYP_PULLUP _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLUP) -#define V_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP) -#define G_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP, M_BCM1480_MC_RTT_BYP_PULLUP) - -#define M_BCM1480_MC_RTT_BYPASS _SB_MAKEMASK1(8) -#define M_BCM1480_MC_RTT_COMP_MOV_AVG _SB_MAKEMASK1(9) - -#define S_BCM1480_MC_PVT_BYP_C1_PULLDOWN 10 -#define M_BCM1480_MC_PVT_BYP_C1_PULLDOWN _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN) -#define V_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN) -#define G_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN, M_BCM1480_MC_PVT_BYP_C1_PULLDOWN) - -#define S_BCM1480_MC_PVT_BYP_C1_PULLUP 15 -#define M_BCM1480_MC_PVT_BYP_C1_PULLUP _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLUP) -#define V_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP) -#define G_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP, M_BCM1480_MC_PVT_BYP_C1_PULLUP) - -#define S_BCM1480_MC_PVT_BYP_C2_PULLDOWN 20 -#define M_BCM1480_MC_PVT_BYP_C2_PULLDOWN _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN) -#define V_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN) -#define G_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN, M_BCM1480_MC_PVT_BYP_C2_PULLDOWN) - -#define S_BCM1480_MC_PVT_BYP_C2_PULLUP 25 -#define M_BCM1480_MC_PVT_BYP_C2_PULLUP _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLUP) -#define V_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP) -#define G_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP, M_BCM1480_MC_PVT_BYP_C2_PULLUP) - -#define M_BCM1480_MC_PVT_BYPASS _SB_MAKEMASK1(30) -#define M_BCM1480_MC_PVT_COMP_MOV_AVG _SB_MAKEMASK1(31) - -#define M_BCM1480_MC_CLK_CLASS _SB_MAKEMASK1(34) -#define M_BCM1480_MC_DATA_CLASS _SB_MAKEMASK1(35) -#define M_BCM1480_MC_ADDR_CLASS _SB_MAKEMASK1(36) - -#define M_BCM1480_MC_DQ_ODT_75 _SB_MAKEMASK1(37) -#define M_BCM1480_MC_DQ_ODT_150 _SB_MAKEMASK1(38) -#define M_BCM1480_MC_DQS_ODT_75 _SB_MAKEMASK1(39) -#define M_BCM1480_MC_DQS_ODT_150 _SB_MAKEMASK1(40) -#define M_BCM1480_MC_DQS_DIFF _SB_MAKEMASK1(41) - -/* - * ECC Test Data Register (Table 95) - */ - -#define S_BCM1480_MC_DATA_INVERT 0 -#define M_DATA_ECC_INVERT _SB_MAKEMASK(64, S_BCM1480_MC_ECC_INVERT) - -/* - * ECC Test ECC Register (Table 96) - */ - -#define S_BCM1480_MC_ECC_INVERT 0 -#define M_BCM1480_MC_ECC_INVERT _SB_MAKEMASK(8, S_BCM1480_MC_ECC_INVERT) - -/* - * SDRAM Timing Register (Table 97) - */ - -#define S_BCM1480_MC_tRCD 0 -#define M_BCM1480_MC_tRCD _SB_MAKEMASK(4, S_BCM1480_MC_tRCD) -#define V_BCM1480_MC_tRCD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCD) -#define G_BCM1480_MC_tRCD(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCD, M_BCM1480_MC_tRCD) -#define K_BCM1480_MC_tRCD_DEFAULT 3 -#define V_BCM1480_MC_tRCD_DEFAULT V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT) - -#define S_BCM1480_MC_tCL 4 -#define M_BCM1480_MC_tCL _SB_MAKEMASK(4, S_BCM1480_MC_tCL) -#define V_BCM1480_MC_tCL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tCL) -#define G_BCM1480_MC_tCL(x) _SB_GETVALUE(x, S_BCM1480_MC_tCL, M_BCM1480_MC_tCL) -#define K_BCM1480_MC_tCL_DEFAULT 2 -#define V_BCM1480_MC_tCL_DEFAULT V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT) - -#define M_BCM1480_MC_tCrDh _SB_MAKEMASK1(8) - -#define S_BCM1480_MC_tWR 9 -#define M_BCM1480_MC_tWR _SB_MAKEMASK(3, S_BCM1480_MC_tWR) -#define V_BCM1480_MC_tWR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tWR) -#define G_BCM1480_MC_tWR(x) _SB_GETVALUE(x, S_BCM1480_MC_tWR, M_BCM1480_MC_tWR) -#define K_BCM1480_MC_tWR_DEFAULT 2 -#define V_BCM1480_MC_tWR_DEFAULT V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT) - -#define S_BCM1480_MC_tCwD 12 -#define M_BCM1480_MC_tCwD _SB_MAKEMASK(4, S_BCM1480_MC_tCwD) -#define V_BCM1480_MC_tCwD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tCwD) -#define G_BCM1480_MC_tCwD(x) _SB_GETVALUE(x, S_BCM1480_MC_tCwD, M_BCM1480_MC_tCwD) -#define K_BCM1480_MC_tCwD_DEFAULT 1 -#define V_BCM1480_MC_tCwD_DEFAULT V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT) - -#define S_BCM1480_MC_tRP 16 -#define M_BCM1480_MC_tRP _SB_MAKEMASK(4, S_BCM1480_MC_tRP) -#define V_BCM1480_MC_tRP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRP) -#define G_BCM1480_MC_tRP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRP, M_BCM1480_MC_tRP) -#define K_BCM1480_MC_tRP_DEFAULT 4 -#define V_BCM1480_MC_tRP_DEFAULT V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT) - -#define S_BCM1480_MC_tRRD 20 -#define M_BCM1480_MC_tRRD _SB_MAKEMASK(4, S_BCM1480_MC_tRRD) -#define V_BCM1480_MC_tRRD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRRD) -#define G_BCM1480_MC_tRRD(x) _SB_GETVALUE(x, S_BCM1480_MC_tRRD, M_BCM1480_MC_tRRD) -#define K_BCM1480_MC_tRRD_DEFAULT 2 -#define V_BCM1480_MC_tRRD_DEFAULT V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT) - -#define S_BCM1480_MC_tRCw 24 -#define M_BCM1480_MC_tRCw _SB_MAKEMASK(5, S_BCM1480_MC_tRCw) -#define V_BCM1480_MC_tRCw(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCw) -#define G_BCM1480_MC_tRCw(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCw, M_BCM1480_MC_tRCw) -#define K_BCM1480_MC_tRCw_DEFAULT 10 -#define V_BCM1480_MC_tRCw_DEFAULT V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT) - -#define S_BCM1480_MC_tRCr 32 -#define M_BCM1480_MC_tRCr _SB_MAKEMASK(5, S_BCM1480_MC_tRCr) -#define V_BCM1480_MC_tRCr(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCr) -#define G_BCM1480_MC_tRCr(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCr, M_BCM1480_MC_tRCr) -#define K_BCM1480_MC_tRCr_DEFAULT 9 -#define V_BCM1480_MC_tRCr_DEFAULT V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT) - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_tFAW 40 -#define M_BCM1480_MC_tFAW _SB_MAKEMASK(6, S_BCM1480_MC_tFAW) -#define V_BCM1480_MC_tFAW(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tFAW) -#define G_BCM1480_MC_tFAW(x) _SB_GETVALUE(x, S_BCM1480_MC_tFAW, M_BCM1480_MC_tFAW) -#define K_BCM1480_MC_tFAW_DEFAULT 0 -#define V_BCM1480_MC_tFAW_DEFAULT V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT) -#endif - -#define S_BCM1480_MC_tRFC 48 -#define M_BCM1480_MC_tRFC _SB_MAKEMASK(7, S_BCM1480_MC_tRFC) -#define V_BCM1480_MC_tRFC(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRFC) -#define G_BCM1480_MC_tRFC(x) _SB_GETVALUE(x, S_BCM1480_MC_tRFC, M_BCM1480_MC_tRFC) -#define K_BCM1480_MC_tRFC_DEFAULT 12 -#define V_BCM1480_MC_tRFC_DEFAULT V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT) - -#define S_BCM1480_MC_tFIFO 56 -#define M_BCM1480_MC_tFIFO _SB_MAKEMASK(2, S_BCM1480_MC_tFIFO) -#define V_BCM1480_MC_tFIFO(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tFIFO) -#define G_BCM1480_MC_tFIFO(x) _SB_GETVALUE(x, S_BCM1480_MC_tFIFO, M_BCM1480_MC_tFIFO) -#define K_BCM1480_MC_tFIFO_DEFAULT 0 -#define V_BCM1480_MC_tFIFO_DEFAULT V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT) - -#define S_BCM1480_MC_tW2R 58 -#define M_BCM1480_MC_tW2R _SB_MAKEMASK(2, S_BCM1480_MC_tW2R) -#define V_BCM1480_MC_tW2R(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tW2R) -#define G_BCM1480_MC_tW2R(x) _SB_GETVALUE(x, S_BCM1480_MC_tW2R, M_BCM1480_MC_tW2R) -#define K_BCM1480_MC_tW2R_DEFAULT 1 -#define V_BCM1480_MC_tW2R_DEFAULT V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT) - -#define S_BCM1480_MC_tR2W 60 -#define M_BCM1480_MC_tR2W _SB_MAKEMASK(2, S_BCM1480_MC_tR2W) -#define V_BCM1480_MC_tR2W(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tR2W) -#define G_BCM1480_MC_tR2W(x) _SB_GETVALUE(x, S_BCM1480_MC_tR2W, M_BCM1480_MC_tR2W) -#define K_BCM1480_MC_tR2W_DEFAULT 0 -#define V_BCM1480_MC_tR2W_DEFAULT V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT) - -#define M_BCM1480_MC_tR2R _SB_MAKEMASK1(62) - -#define V_BCM1480_MC_TIMING_DEFAULT (M_BCM1480_MC_tR2R | \ - V_BCM1480_MC_tFIFO_DEFAULT | \ - V_BCM1480_MC_tR2W_DEFAULT | \ - V_BCM1480_MC_tW2R_DEFAULT | \ - V_BCM1480_MC_tRFC_DEFAULT | \ - V_BCM1480_MC_tRCr_DEFAULT | \ - V_BCM1480_MC_tRCw_DEFAULT | \ - V_BCM1480_MC_tRRD_DEFAULT | \ - V_BCM1480_MC_tRP_DEFAULT | \ - V_BCM1480_MC_tCwD_DEFAULT | \ - V_BCM1480_MC_tWR_DEFAULT | \ - M_BCM1480_MC_tCrDh | \ - V_BCM1480_MC_tCL_DEFAULT | \ - V_BCM1480_MC_tRCD_DEFAULT) - -/* - * SDRAM Timing Register 2 - */ - -#if SIBYTE_HDR_FEATURE(1480, PASS2) - -#define S_BCM1480_MC_tAL 0 -#define M_BCM1480_MC_tAL _SB_MAKEMASK(4, S_BCM1480_MC_tAL) -#define V_BCM1480_MC_tAL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tAL) -#define G_BCM1480_MC_tAL(x) _SB_GETVALUE(x, S_BCM1480_MC_tAL, M_BCM1480_MC_tAL) -#define K_BCM1480_MC_tAL_DEFAULT 0 -#define V_BCM1480_MC_tAL_DEFAULT V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT) - -#define S_BCM1480_MC_tRTP 4 -#define M_BCM1480_MC_tRTP _SB_MAKEMASK(3, S_BCM1480_MC_tRTP) -#define V_BCM1480_MC_tRTP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRTP) -#define G_BCM1480_MC_tRTP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRTP, M_BCM1480_MC_tRTP) -#define K_BCM1480_MC_tRTP_DEFAULT 2 -#define V_BCM1480_MC_tRTP_DEFAULT V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT) - -#define S_BCM1480_MC_tW2W 8 -#define M_BCM1480_MC_tW2W _SB_MAKEMASK(2, S_BCM1480_MC_tW2W) -#define V_BCM1480_MC_tW2W(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tW2W) -#define G_BCM1480_MC_tW2W(x) _SB_GETVALUE(x, S_BCM1480_MC_tW2W, M_BCM1480_MC_tW2W) -#define K_BCM1480_MC_tW2W_DEFAULT 0 -#define V_BCM1480_MC_tW2W_DEFAULT V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT) - -#define S_BCM1480_MC_tRAP 12 -#define M_BCM1480_MC_tRAP _SB_MAKEMASK(4, S_BCM1480_MC_tRAP) -#define V_BCM1480_MC_tRAP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRAP) -#define G_BCM1480_MC_tRAP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRAP, M_BCM1480_MC_tRAP) -#define K_BCM1480_MC_tRAP_DEFAULT 0 -#define V_BCM1480_MC_tRAP_DEFAULT V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT) - -#endif - - - -/* - * Global Registers: single instances per BCM1480 - */ - -/* - * Global Configuration Register (Table 99) - */ - -#define S_BCM1480_MC_BLK_SET_MARK 8 -#define M_BCM1480_MC_BLK_SET_MARK _SB_MAKEMASK(4, S_BCM1480_MC_BLK_SET_MARK) -#define V_BCM1480_MC_BLK_SET_MARK(x) _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_SET_MARK) -#define G_BCM1480_MC_BLK_SET_MARK(x) _SB_GETVALUE(x, S_BCM1480_MC_BLK_SET_MARK, M_BCM1480_MC_BLK_SET_MARK) - -#define S_BCM1480_MC_BLK_CLR_MARK 12 -#define M_BCM1480_MC_BLK_CLR_MARK _SB_MAKEMASK(4, S_BCM1480_MC_BLK_CLR_MARK) -#define V_BCM1480_MC_BLK_CLR_MARK(x) _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_CLR_MARK) -#define G_BCM1480_MC_BLK_CLR_MARK(x) _SB_GETVALUE(x, S_BCM1480_MC_BLK_CLR_MARK, M_BCM1480_MC_BLK_CLR_MARK) - -#define M_BCM1480_MC_PKT_PRIORITY _SB_MAKEMASK1(16) - -#define S_BCM1480_MC_MAX_AGE 20 -#define M_BCM1480_MC_MAX_AGE _SB_MAKEMASK(4, S_BCM1480_MC_MAX_AGE) -#define V_BCM1480_MC_MAX_AGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_MAX_AGE) -#define G_BCM1480_MC_MAX_AGE(x) _SB_GETVALUE(x, S_BCM1480_MC_MAX_AGE, M_BCM1480_MC_MAX_AGE) - -#define M_BCM1480_MC_BERR_DISABLE _SB_MAKEMASK1(29) -#define M_BCM1480_MC_FORCE_SEQ _SB_MAKEMASK1(30) -#define M_BCM1480_MC_VGEN _SB_MAKEMASK1(32) - -#define S_BCM1480_MC_SLEW 33 -#define M_BCM1480_MC_SLEW _SB_MAKEMASK(2, S_BCM1480_MC_SLEW) -#define V_BCM1480_MC_SLEW(x) _SB_MAKEVALUE(x, S_BCM1480_MC_SLEW) -#define G_BCM1480_MC_SLEW(x) _SB_GETVALUE(x, S_BCM1480_MC_SLEW, M_BCM1480_MC_SLEW) - -#define M_BCM1480_MC_SSTL_VOLTAGE _SB_MAKEMASK1(35) - -/* - * Global Channel Interleave Register (Table 100) - */ - -#define S_BCM1480_MC_INTLV0 0 -#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0) -#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0) -#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0) - -#define S_BCM1480_MC_INTLV1 8 -#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1) -#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1) -#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1) - -#define S_BCM1480_MC_INTLV_MODE 16 -#define M_BCM1480_MC_INTLV_MODE _SB_MAKEMASK(3, S_BCM1480_MC_INTLV_MODE) -#define V_BCM1480_MC_INTLV_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV_MODE) -#define G_BCM1480_MC_INTLV_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV_MODE, M_BCM1480_MC_INTLV_MODE) - -#define K_BCM1480_MC_INTLV_MODE_NONE 0x0 -#define K_BCM1480_MC_INTLV_MODE_01 0x1 -#define K_BCM1480_MC_INTLV_MODE_23 0x2 -#define K_BCM1480_MC_INTLV_MODE_01_23 0x3 -#define K_BCM1480_MC_INTLV_MODE_0123 0x4 - -#define V_BCM1480_MC_INTLV_MODE_NONE V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE) -#define V_BCM1480_MC_INTLV_MODE_01 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01) -#define V_BCM1480_MC_INTLV_MODE_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23) -#define V_BCM1480_MC_INTLV_MODE_01_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23) -#define V_BCM1480_MC_INTLV_MODE_0123 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123) - -/* - * ECC Status Register - */ - -#define S_BCM1480_MC_ECC_ERR_ADDR 0 -#define M_BCM1480_MC_ECC_ERR_ADDR _SB_MAKEMASK(37, S_BCM1480_MC_ECC_ERR_ADDR) -#define V_BCM1480_MC_ECC_ERR_ADDR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR) -#define G_BCM1480_MC_ECC_ERR_ADDR(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR, M_BCM1480_MC_ECC_ERR_ADDR) - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define M_BCM1480_MC_ECC_ERR_RMW _SB_MAKEMASK1(60) -#endif - -#define M_BCM1480_MC_ECC_MULT_ERR_DET _SB_MAKEMASK1(61) -#define M_BCM1480_MC_ECC_UERR_DET _SB_MAKEMASK1(62) -#define M_BCM1480_MC_ECC_CERR_DET _SB_MAKEMASK1(63) - -/* - * Global ECC Address Register (Table 102) - */ - -#define S_BCM1480_MC_ECC_CORR_ADDR 0 -#define M_BCM1480_MC_ECC_CORR_ADDR _SB_MAKEMASK(37, S_BCM1480_MC_ECC_CORR_ADDR) -#define V_BCM1480_MC_ECC_CORR_ADDR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR) -#define G_BCM1480_MC_ECC_CORR_ADDR(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR, M_BCM1480_MC_ECC_CORR_ADDR) - -/* - * Global ECC Correction Register (Table 103) - */ - -#define S_BCM1480_MC_ECC_CORRECT 0 -#define M_BCM1480_MC_ECC_CORRECT _SB_MAKEMASK(64, S_BCM1480_MC_ECC_CORRECT) -#define V_BCM1480_MC_ECC_CORRECT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORRECT) -#define G_BCM1480_MC_ECC_CORRECT(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORRECT, M_BCM1480_MC_ECC_CORRECT) - -/* - * Global ECC Performance Counters Control Register (Table 104) - */ - -#define S_BCM1480_MC_CHANNEL_SELECT 0 -#define M_BCM1480_MC_CHANNEL_SELECT _SB_MAKEMASK(4, S_BCM1480_MC_CHANNEL_SELECT) -#define V_BCM1480_MC_CHANNEL_SELECT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CHANNEL_SELECT) -#define G_BCM1480_MC_CHANNEL_SELECT(x) _SB_GETVALUE(x, S_BCM1480_MC_CHANNEL_SELECT, M_BCM1480_MC_CHANNEL_SELECT) -#define K_BCM1480_MC_CHANNEL_SELECT_0 0x1 -#define K_BCM1480_MC_CHANNEL_SELECT_1 0x2 -#define K_BCM1480_MC_CHANNEL_SELECT_2 0x4 -#define K_BCM1480_MC_CHANNEL_SELECT_3 0x8 - -#endif /* _BCM1480_MC_H */ diff --git a/include/asm-mips/sibyte/bcm1480_regs.h b/include/asm-mips/sibyte/bcm1480_regs.h deleted file mode 100644 index b4077bb72611..000000000000 --- a/include/asm-mips/sibyte/bcm1480_regs.h +++ /dev/null @@ -1,902 +0,0 @@ -/* ********************************************************************* - * BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package - * - * Register Definitions File: bcm1480_regs.h - * - * This module contains the addresses of the on-chip peripherals - * on the BCM1280 and BCM1480. - * - * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03) - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - -#ifndef _BCM1480_REGS_H -#define _BCM1480_REGS_H - -#include "sb1250_defs.h" - -/* ********************************************************************* - * Pull in the BCM1250's registers since a great deal of the 1480's - * functions are the same as the BCM1250. - ********************************************************************* */ - -#include "sb1250_regs.h" - - -/* ********************************************************************* - * Some general notes: - * - * Register addresses are grouped by function and follow the order - * of the User Manual. - * - * For the most part, when there is more than one peripheral - * of the same type on the SOC, the constants below will be - * offsets from the base of each peripheral. For example, - * the MAC registers are described as offsets from the first - * MAC register, and there will be a MAC_REGISTER() macro - * to calculate the base address of a given MAC. - * - * The information in this file is based on the BCM1X55/BCM1X80 - * User Manual, Document 1X55_1X80-UM100-R, 22/12/03. - * - * This file is basically a "what's new" header file. Since the - * BCM1250 and the new BCM1480 (and derivatives) share many common - * features, this file contains only what's new or changed from - * the 1250. (above, you can see that we include the 1250 symbols - * to get the base functionality). - * - * In software, be sure to use the correct symbols, particularly - * for blocks that are different between the two chip families. - * All BCM1480-specific symbols have _BCM1480_ in their names, - * and all BCM1250-specific and "base" functions that are common in - * both chips have no special names (this is for compatibility with - * older include files). Therefore, if you're working with the - * SCD, which is very different on each chip, A_SCD_xxx implies - * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480 - * version. - ********************************************************************* */ - - -/* ********************************************************************* - * Memory Controller Registers (Section 6) - ********************************************************************* */ - -#define A_BCM1480_MC_BASE_0 0x0010050000 -#define A_BCM1480_MC_BASE_1 0x0010051000 -#define A_BCM1480_MC_BASE_2 0x0010052000 -#define A_BCM1480_MC_BASE_3 0x0010053000 -#define BCM1480_MC_REGISTER_SPACING 0x1000 - -#define A_BCM1480_MC_BASE(ctlid) (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING) -#define A_BCM1480_MC_REGISTER(ctlid, reg) (A_BCM1480_MC_BASE(ctlid)+(reg)) - -#define R_BCM1480_MC_CONFIG 0x0000000100 -#define R_BCM1480_MC_CS_START 0x0000000120 -#define R_BCM1480_MC_CS_END 0x0000000140 -#define S_BCM1480_MC_CS_STARTEND 24 - -#define R_BCM1480_MC_CS01_ROW0 0x0000000180 -#define R_BCM1480_MC_CS01_ROW1 0x00000001A0 -#define R_BCM1480_MC_CS23_ROW0 0x0000000200 -#define R_BCM1480_MC_CS23_ROW1 0x0000000220 -#define R_BCM1480_MC_CS01_COL0 0x0000000280 -#define R_BCM1480_MC_CS01_COL1 0x00000002A0 -#define R_BCM1480_MC_CS23_COL0 0x0000000300 -#define R_BCM1480_MC_CS23_COL1 0x0000000320 - -#define R_BCM1480_MC_CSX_BASE 0x0000000180 -#define R_BCM1480_MC_CSX_ROW0 0x0000000000 /* relative to CSX_BASE */ -#define R_BCM1480_MC_CSX_ROW1 0x0000000020 /* relative to CSX_BASE */ -#define R_BCM1480_MC_CSX_COL0 0x0000000100 /* relative to CSX_BASE */ -#define R_BCM1480_MC_CSX_COL1 0x0000000120 /* relative to CSX_BASE */ -#define BCM1480_MC_CSX_SPACING 0x0000000080 /* CS23 relative to CS01 */ - -#define R_BCM1480_MC_CS01_BA 0x0000000380 -#define R_BCM1480_MC_CS23_BA 0x00000003A0 -#define R_BCM1480_MC_DRAMCMD 0x0000000400 -#define R_BCM1480_MC_DRAMMODE 0x0000000420 -#define R_BCM1480_MC_CLOCK_CFG 0x0000000440 -#define R_BCM1480_MC_MCLK_CFG R_BCM1480_MC_CLOCK_CFG -#define R_BCM1480_MC_TEST_DATA 0x0000000480 -#define R_BCM1480_MC_TEST_ECC 0x00000004A0 -#define R_BCM1480_MC_TIMING1 0x00000004C0 -#define R_BCM1480_MC_TIMING2 0x00000004E0 -#define R_BCM1480_MC_DLL_CFG 0x0000000500 -#define R_BCM1480_MC_DRIVE_CFG 0x0000000520 - -#if SIBYTE_HDR_FEATURE(1480, PASS2) -#define R_BCM1480_MC_ODT 0x0000000460 -#define R_BCM1480_MC_ECC_STATUS 0x0000000540 -#endif - -/* Global registers (single instance) */ -#define A_BCM1480_MC_GLB_CONFIG 0x0010054100 -#define A_BCM1480_MC_GLB_INTLV 0x0010054120 -#define A_BCM1480_MC_GLB_ECC_STATUS 0x0010054140 -#define A_BCM1480_MC_GLB_ECC_ADDR 0x0010054160 -#define A_BCM1480_MC_GLB_ECC_CORRECT 0x0010054180 -#define A_BCM1480_MC_GLB_PERF_CNT_CONTROL 0x00100541A0 - -/* ********************************************************************* - * L2 Cache Control Registers (Section 5) - ********************************************************************* */ - -#define A_BCM1480_L2_BASE 0x0010040000 - -#define A_BCM1480_L2_READ_TAG 0x0010040018 -#define A_BCM1480_L2_ECC_TAG 0x0010040038 -#define A_BCM1480_L2_MISC0_VALUE 0x0010040058 -#define A_BCM1480_L2_MISC1_VALUE 0x0010040078 -#define A_BCM1480_L2_MISC2_VALUE 0x0010040098 -#define A_BCM1480_L2_MISC_CONFIG 0x0010040040 /* x040 */ -#define A_BCM1480_L2_CACHE_DISABLE 0x0010040060 /* x060 */ -#define A_BCM1480_L2_MAKECACHEDISABLE(x) (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12)) -#define A_BCM1480_L2_WAY_ENABLE_3_0 0x0010040080 /* x080 */ -#define A_BCM1480_L2_WAY_ENABLE_7_4 0x00100400A0 /* x0A0 */ -#define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12)) -#define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12)) -#define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12)) -#define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12)) -#define A_BCM1480_L2_WAY_LOCAL_3_0 0x0010040100 /* x100 */ -#define A_BCM1480_L2_WAY_LOCAL_7_4 0x0010040120 /* x120 */ -#define A_BCM1480_L2_WAY_REMOTE_3_0 0x0010040140 /* x140 */ -#define A_BCM1480_L2_WAY_REMOTE_7_4 0x0010040160 /* x160 */ -#define A_BCM1480_L2_WAY_AGENT_3_0 0x00100400C0 /* xxC0 */ -#define A_BCM1480_L2_WAY_AGENT_7_4 0x00100400E0 /* xxE0 */ -#define A_BCM1480_L2_WAY_ENABLE(A, banks) (A | (((~(banks))&0x0F) << 8)) -#define A_BCM1480_L2_BANK_BASE 0x00D0300000 -#define A_BCM1480_L2_BANK_ADDRESS(b) (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17)) -#define A_BCM1480_L2_MGMT_TAG_BASE 0x00D0000000 - - -/* ********************************************************************* - * PCI-X Interface Registers (Section 7) - ********************************************************************* */ - -#define A_BCM1480_PCI_BASE 0x0010061400 - -#define A_BCM1480_PCI_RESET 0x0010061400 -#define A_BCM1480_PCI_DLL 0x0010061500 - -#define A_BCM1480_PCI_TYPE00_HEADER 0x002E000000 - -/* ********************************************************************* - * Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6) - ********************************************************************* */ - -/* No register changes with Rev.C BCM1250, but one additional MAC */ - -#define A_BCM1480_MAC_BASE_2 0x0010066000 - -#ifndef A_MAC_BASE_2 -#define A_MAC_BASE_2 A_BCM1480_MAC_BASE_2 -#endif - -#define A_BCM1480_MAC_BASE_3 0x0010067000 -#define A_MAC_BASE_3 A_BCM1480_MAC_BASE_3 - -#define R_BCM1480_MAC_DMA_OODPKTLOST 0x00000038 - -#ifndef R_MAC_DMA_OODPKTLOST -#define R_MAC_DMA_OODPKTLOST R_BCM1480_MAC_DMA_OODPKTLOST -#endif - - -/* ********************************************************************* - * DUART Registers (Section 14) - ********************************************************************* */ - -/* No significant differences from BCM1250, two DUARTs */ - -/* Conventions, per user manual: - * DUART generic, channels A,B,C,D - * DUART0 implementing channels A,B - * DUART1 inplementing channels C,D - */ - -#define BCM1480_DUART_NUM_PORTS 4 - -#define A_BCM1480_DUART0 0x0010060000 -#define A_BCM1480_DUART1 0x0010060400 -#define A_BCM1480_DUART(chan) ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1) - -#define BCM1480_DUART_CHANREG_SPACING 0x100 -#define A_BCM1480_DUART_CHANREG(chan, reg) \ - (A_BCM1480_DUART(chan) + \ - BCM1480_DUART_CHANREG_SPACING * (((chan) & 1) + 1) + (reg)) -#define A_BCM1480_DUART_CTRLREG(chan, reg) \ - (A_BCM1480_DUART(chan) + \ - BCM1480_DUART_CHANREG_SPACING * 3 + (reg)) - -#define DUART_IMRISR_SPACING 0x20 -#define DUART_INCHNG_SPACING 0x10 - -#define R_BCM1480_DUART_IMRREG(chan) \ - (R_DUART_IMR_A + ((chan) & 1) * DUART_IMRISR_SPACING) -#define R_BCM1480_DUART_ISRREG(chan) \ - (R_DUART_ISR_A + ((chan) & 1) * DUART_IMRISR_SPACING) -#define R_BCM1480_DUART_INCHREG(chan) \ - (R_DUART_IN_CHNG_A + ((chan) & 1) * DUART_INCHNG_SPACING) - -#define A_BCM1480_DUART_IMRREG(chan) \ - (A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_IMRREG(chan))) -#define A_BCM1480_DUART_ISRREG(chan) \ - (A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_ISRREG(chan))) - -#define A_BCM1480_DUART_IN_PORT(chan) \ - (A_BCM1480_DUART_CTRLREG((chan), R_DUART_IN_PORT)) - -/* - * These constants are the absolute addresses. - */ - -#define A_BCM1480_DUART_MODE_REG_1_C 0x0010060400 -#define A_BCM1480_DUART_MODE_REG_2_C 0x0010060410 -#define A_BCM1480_DUART_STATUS_C 0x0010060420 -#define A_BCM1480_DUART_CLK_SEL_C 0x0010060430 -#define A_BCM1480_DUART_FULL_CTL_C 0x0010060440 -#define A_BCM1480_DUART_CMD_C 0x0010060450 -#define A_BCM1480_DUART_RX_HOLD_C 0x0010060460 -#define A_BCM1480_DUART_TX_HOLD_C 0x0010060470 -#define A_BCM1480_DUART_OPCR_C 0x0010060480 -#define A_BCM1480_DUART_AUX_CTRL_C 0x0010060490 - -#define A_BCM1480_DUART_MODE_REG_1_D 0x0010060500 -#define A_BCM1480_DUART_MODE_REG_2_D 0x0010060510 -#define A_BCM1480_DUART_STATUS_D 0x0010060520 -#define A_BCM1480_DUART_CLK_SEL_D 0x0010060530 -#define A_BCM1480_DUART_FULL_CTL_D 0x0010060540 -#define A_BCM1480_DUART_CMD_D 0x0010060550 -#define A_BCM1480_DUART_RX_HOLD_D 0x0010060560 -#define A_BCM1480_DUART_TX_HOLD_D 0x0010060570 -#define A_BCM1480_DUART_OPCR_D 0x0010060580 -#define A_BCM1480_DUART_AUX_CTRL_D 0x0010060590 - -#define A_BCM1480_DUART_INPORT_CHNG_CD 0x0010060600 -#define A_BCM1480_DUART_AUX_CTRL_CD 0x0010060610 -#define A_BCM1480_DUART_ISR_C 0x0010060620 -#define A_BCM1480_DUART_IMR_C 0x0010060630 -#define A_BCM1480_DUART_ISR_D 0x0010060640 -#define A_BCM1480_DUART_IMR_D 0x0010060650 -#define A_BCM1480_DUART_OUT_PORT_CD 0x0010060660 -#define A_BCM1480_DUART_OPCR_CD 0x0010060670 -#define A_BCM1480_DUART_IN_PORT_CD 0x0010060680 -#define A_BCM1480_DUART_ISR_CD 0x0010060690 -#define A_BCM1480_DUART_IMR_CD 0x00100606A0 -#define A_BCM1480_DUART_SET_OPR_CD 0x00100606B0 -#define A_BCM1480_DUART_CLEAR_OPR_CD 0x00100606C0 -#define A_BCM1480_DUART_INPORT_CHNG_C 0x00100606D0 -#define A_BCM1480_DUART_INPORT_CHNG_D 0x00100606E0 - - -/* ********************************************************************* - * Generic Bus Registers (Section 15) and PCMCIA Registers (Section 16) - ********************************************************************* */ - -#define A_BCM1480_IO_PCMCIA_CFG_B 0x0010061A58 -#define A_BCM1480_IO_PCMCIA_STATUS_B 0x0010061A68 - -/* ********************************************************************* - * GPIO Registers (Section 17) - ********************************************************************* */ - -/* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */ - -#define A_BCM1480_GPIO_INT_ADD_TYPE 0x0010061A78 -#define R_BCM1480_GPIO_INT_ADD_TYPE (-8) - -#define A_GPIO_INT_ADD_TYPE A_BCM1480_GPIO_INT_ADD_TYPE -#define R_GPIO_INT_ADD_TYPE R_BCM1480_GPIO_INT_ADD_TYPE - -/* ********************************************************************* - * SMBus Registers (Section 18) - ********************************************************************* */ - -/* No changes from BCM1250 */ - -/* ********************************************************************* - * Timer Registers (Sections 4.6) - ********************************************************************* */ - -/* BCM1480 has two additional watchdogs */ - -/* Watchdog timers */ - -#define A_BCM1480_SCD_WDOG_2 0x0010022050 -#define A_BCM1480_SCD_WDOG_3 0x0010022150 - -#define BCM1480_SCD_NUM_WDOGS 4 - -#define A_BCM1480_SCD_WDOG_BASE(w) (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100) -#define A_BCM1480_SCD_WDOG_REGISTER(w, r) (A_BCM1480_SCD_WDOG_BASE(w) + (r)) - -#define A_BCM1480_SCD_WDOG_INIT_2 0x0010022050 -#define A_BCM1480_SCD_WDOG_CNT_2 0x0010022058 -#define A_BCM1480_SCD_WDOG_CFG_2 0x0010022060 - -#define A_BCM1480_SCD_WDOG_INIT_3 0x0010022150 -#define A_BCM1480_SCD_WDOG_CNT_3 0x0010022158 -#define A_BCM1480_SCD_WDOG_CFG_3 0x0010022160 - -/* BCM1480 has two additional compare registers */ - -#define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT A_SCD_ZBBUS_CYCLE_COUNT -#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE 0x0010020C00 -#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0 A_SCD_ZBBUS_CYCLE_CP0 -#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1 A_SCD_ZBBUS_CYCLE_CP1 -#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2 0x0010020C10 -#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3 0x0010020C18 - -/* ********************************************************************* - * System Control Registers (Section 4.2) - ********************************************************************* */ - -/* Scratch register in different place */ - -#define A_BCM1480_SCD_SCRATCH 0x100200A0 - -/* ********************************************************************* - * System Address Trap Registers (Section 4.9) - ********************************************************************* */ - -/* No changes from BCM1250 */ - -/* ********************************************************************* - * System Interrupt Mapper Registers (Sections 4.3-4.5) - ********************************************************************* */ - -#define A_BCM1480_IMR_CPU0_BASE 0x0010020000 -#define A_BCM1480_IMR_CPU1_BASE 0x0010022000 -#define A_BCM1480_IMR_CPU2_BASE 0x0010024000 -#define A_BCM1480_IMR_CPU3_BASE 0x0010026000 -#define BCM1480_IMR_REGISTER_SPACING 0x2000 -#define BCM1480_IMR_REGISTER_SPACING_SHIFT 13 - -#define A_BCM1480_IMR_MAPPER(cpu) (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING) -#define A_BCM1480_IMR_REGISTER(cpu, reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg)) - -/* Most IMR registers are 128 bits, implemented as non-contiguous - 64-bit registers high (_H) and low (_L) */ -#define BCM1480_IMR_HL_SPACING 0x1000 - -#define R_BCM1480_IMR_INTERRUPT_DIAG_H 0x0010 -#define R_BCM1480_IMR_LDT_INTERRUPT_H 0x0018 -#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H 0x0020 -#define R_BCM1480_IMR_INTERRUPT_MASK_H 0x0028 -#define R_BCM1480_IMR_INTERRUPT_TRACE_H 0x0038 -#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040 -#define R_BCM1480_IMR_LDT_INTERRUPT_SET 0x0048 -#define R_BCM1480_IMR_MAILBOX_0_CPU 0x00C0 -#define R_BCM1480_IMR_MAILBOX_0_SET_CPU 0x00C8 -#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU 0x00D0 -#define R_BCM1480_IMR_MAILBOX_1_CPU 0x00E0 -#define R_BCM1480_IMR_MAILBOX_1_SET_CPU 0x00E8 -#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU 0x00F0 -#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H 0x0100 -#define BCM1480_IMR_INTERRUPT_STATUS_COUNT 8 -#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H 0x0200 -#define BCM1480_IMR_INTERRUPT_MAP_COUNT 64 - -#define R_BCM1480_IMR_INTERRUPT_DIAG_L 0x1010 -#define R_BCM1480_IMR_LDT_INTERRUPT_L 0x1018 -#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L 0x1020 -#define R_BCM1480_IMR_INTERRUPT_MASK_L 0x1028 -#define R_BCM1480_IMR_INTERRUPT_TRACE_L 0x1038 -#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040 -#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L 0x1100 -#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L 0x1200 - -#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE 0x0010028000 -#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE 0x0010028100 -#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE 0x0010028200 -#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE 0x0010028300 -#define BCM1480_IMR_ALIAS_MAILBOX_SPACING 0100 - -#define A_BCM1480_IMR_ALIAS_MAILBOX(cpu) (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \ - (cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING) -#define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu, reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg)) - -#define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 /* 0x0x0 */ -#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* 0x0x8 */ - -/* - * these macros work together to build the address of a mailbox - * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2) - * for mbox_0_set_cpu2 returns 0x00100240C8 - */ -#define R_BCM1480_IMR_MAILBOX_CPU 0x00 -#define R_BCM1480_IMR_MAILBOX_SET 0x08 -#define R_BCM1480_IMR_MAILBOX_CLR 0x10 -#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20 -#define A_BCM1480_MAILBOX_REGISTER(num, reg, cpu) \ - (A_BCM1480_IMR_CPU0_BASE + \ - (num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \ - (cpu * BCM1480_IMR_REGISTER_SPACING) + \ - (R_BCM1480_IMR_MAILBOX_0_CPU + reg)) - -/* ********************************************************************* - * System Performance Counter Registers (Section 4.7) - ********************************************************************* */ - -/* BCM1480 has four more performance counter registers, and two control - registers. */ - -#define A_BCM1480_SCD_PERF_CNT_BASE 0x00100204C0 - -#define A_BCM1480_SCD_PERF_CNT_CFG0 0x00100204C0 -#define A_BCM1480_SCD_PERF_CNT_CFG_0 A_BCM1480_SCD_PERF_CNT_CFG0 -#define A_BCM1480_SCD_PERF_CNT_CFG1 0x00100204C8 -#define A_BCM1480_SCD_PERF_CNT_CFG_1 A_BCM1480_SCD_PERF_CNT_CFG1 - -#define A_BCM1480_SCD_PERF_CNT_0 A_SCD_PERF_CNT_0 -#define A_BCM1480_SCD_PERF_CNT_1 A_SCD_PERF_CNT_1 -#define A_BCM1480_SCD_PERF_CNT_2 A_SCD_PERF_CNT_2 -#define A_BCM1480_SCD_PERF_CNT_3 A_SCD_PERF_CNT_3 - -#define A_BCM1480_SCD_PERF_CNT_4 0x00100204F0 -#define A_BCM1480_SCD_PERF_CNT_5 0x00100204F8 -#define A_BCM1480_SCD_PERF_CNT_6 0x0010020500 -#define A_BCM1480_SCD_PERF_CNT_7 0x0010020508 - -#define BCM1480_SCD_NUM_PERF_CNT 8 -#define BCM1480_SCD_PERF_CNT_SPACING 8 -#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING)) - -/* ********************************************************************* - * System Bus Watcher Registers (Section 4.8) - ********************************************************************* */ - - -/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */ - -#define A_BCM1480_BUS_ERR_STATUS_DEBUG 0x00100208D8 - -/* ********************************************************************* - * System Debug Controller Registers (Section 19) - ********************************************************************* */ - -/* Same as 1250 */ - -/* ********************************************************************* - * System Trace Unit Registers (Sections 4.10) - ********************************************************************* */ - -/* Same as 1250 */ - -/* ********************************************************************* - * Data Mover DMA Registers (Section 10.7) - ********************************************************************* */ - -/* Same as 1250 */ - - -/* ********************************************************************* - * HyperTransport Interface Registers (Section 8) - ********************************************************************* */ - -#define BCM1480_HT_NUM_PORTS 3 -#define BCM1480_HT_PORT_SPACING 0x800 -#define A_BCM1480_HT_PORT_HEADER(x) (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING)) - -#define A_BCM1480_HT_PORT0_HEADER 0x00FE000000 -#define A_BCM1480_HT_PORT1_HEADER 0x00FE000800 -#define A_BCM1480_HT_PORT2_HEADER 0x00FE001000 -#define A_BCM1480_HT_TYPE00_HEADER 0x00FE002000 - - -/* ********************************************************************* - * Node Controller Registers (Section 9) - ********************************************************************* */ - -#define A_BCM1480_NC_BASE 0x00DFBD0000 - -#define A_BCM1480_NC_RLD_FIELD 0x00DFBD0000 -#define A_BCM1480_NC_RLD_TRIGGER 0x00DFBD0020 -#define A_BCM1480_NC_RLD_BAD_ERROR 0x00DFBD0040 -#define A_BCM1480_NC_RLD_COR_ERROR 0x00DFBD0060 -#define A_BCM1480_NC_RLD_ECC_STATUS 0x00DFBD0080 -#define A_BCM1480_NC_RLD_WAY_ENABLE 0x00DFBD00A0 -#define A_BCM1480_NC_RLD_RANDOM_LFSR 0x00DFBD00C0 - -#define A_BCM1480_NC_INTERRUPT_STATUS 0x00DFBD00E0 -#define A_BCM1480_NC_INTERRUPT_ENABLE 0x00DFBD0100 -#define A_BCM1480_NC_TIMEOUT_COUNTER 0x00DFBD0120 -#define A_BCM1480_NC_TIMEOUT_COUNTER_SEL 0x00DFBD0140 - -#define A_BCM1480_NC_CREDIT_STATUS_REG0 0x00DFBD0200 -#define A_BCM1480_NC_CREDIT_STATUS_REG1 0x00DFBD0220 -#define A_BCM1480_NC_CREDIT_STATUS_REG2 0x00DFBD0240 -#define A_BCM1480_NC_CREDIT_STATUS_REG3 0x00DFBD0260 -#define A_BCM1480_NC_CREDIT_STATUS_REG4 0x00DFBD0280 -#define A_BCM1480_NC_CREDIT_STATUS_REG5 0x00DFBD02A0 -#define A_BCM1480_NC_CREDIT_STATUS_REG6 0x00DFBD02C0 -#define A_BCM1480_NC_CREDIT_STATUS_REG7 0x00DFBD02E0 -#define A_BCM1480_NC_CREDIT_STATUS_REG8 0x00DFBD0300 -#define A_BCM1480_NC_CREDIT_STATUS_REG9 0x00DFBD0320 -#define A_BCM1480_NC_CREDIT_STATUS_REG10 0x00DFBE0000 -#define A_BCM1480_NC_CREDIT_STATUS_REG11 0x00DFBE0020 -#define A_BCM1480_NC_CREDIT_STATUS_REG12 0x00DFBE0040 - -#define A_BCM1480_NC_SR_TIMEOUT_COUNTER 0x00DFBE0060 -#define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080 - - -/* ********************************************************************* - * H&R Block Configuration Registers (Section 12.4) - ********************************************************************* */ - -#define A_BCM1480_HR_BASE_0 0x00DF820000 -#define A_BCM1480_HR_BASE_1 0x00DF8A0000 -#define A_BCM1480_HR_BASE_2 0x00DF920000 -#define BCM1480_HR_REGISTER_SPACING 0x80000 - -#define A_BCM1480_HR_BASE(idx) (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING)) -#define A_BCM1480_HR_REGISTER(idx, reg) (A_BCM1480_HR_BASE(idx) + (reg)) - -#define R_BCM1480_HR_CFG 0x0000000000 - -#define R_BCM1480_HR_MAPPING 0x0000010010 - -#define BCM1480_HR_RULE_SPACING 0x0000000010 -#define BCM1480_HR_NUM_RULES 16 -#define BCM1480_HR_OP_OFFSET 0x0000000100 -#define BCM1480_HR_TYPE_OFFSET 0x0000000108 -#define R_BCM1480_HR_RULE_OP(idx) (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING)) -#define R_BCM1480_HR_RULE_TYPE(idx) (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING)) - -#define BCM1480_HR_LEAF_SPACING 0x0000000010 -#define BCM1480_HR_NUM_LEAVES 10 -#define BCM1480_HR_LEAF_OFFSET 0x0000000300 -#define R_BCM1480_HR_HA_LEAF0(idx) (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING)) - -#define R_BCM1480_HR_EX_LEAF0 0x00000003A0 - -#define BCM1480_HR_PATH_SPACING 0x0000000010 -#define BCM1480_HR_NUM_PATHS 16 -#define BCM1480_HR_PATH_OFFSET 0x0000000600 -#define R_BCM1480_HR_PATH(idx) (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING)) - -#define R_BCM1480_HR_PATH_DEFAULT 0x0000000700 - -#define BCM1480_HR_ROUTE_SPACING 8 -#define BCM1480_HR_NUM_ROUTES 512 -#define BCM1480_HR_ROUTE_OFFSET 0x0000001000 -#define R_BCM1480_HR_RT_WORD(idx) (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING)) - - -/* checked to here - ehs */ -/* ********************************************************************* - * Packet Manager DMA Registers (Section 12.5) - ********************************************************************* */ - -#define A_BCM1480_PM_BASE 0x0010056000 - -#define A_BCM1480_PMI_LCL_0 0x0010058000 -#define A_BCM1480_PMO_LCL_0 0x001005C000 -#define A_BCM1480_PMI_OFFSET_0 (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE) -#define A_BCM1480_PMO_OFFSET_0 (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE) - -#define BCM1480_PM_LCL_REGISTER_SPACING 0x100 -#define BCM1480_PM_NUM_CHANNELS 32 - -#define A_BCM1480_PMI_LCL_BASE(idx) (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING)) -#define A_BCM1480_PMI_LCL_REGISTER(idx, reg) (A_BCM1480_PMI_LCL_BASE(idx) + (reg)) -#define A_BCM1480_PMO_LCL_BASE(idx) (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING)) -#define A_BCM1480_PMO_LCL_REGISTER(idx, reg) (A_BCM1480_PMO_LCL_BASE(idx) + (reg)) - -#define BCM1480_PM_INT_PACKING 8 -#define BCM1480_PM_INT_FUNCTION_SPACING 0x40 -#define BCM1480_PM_INT_NUM_FUNCTIONS 3 - -/* - * DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n) - */ - -#define R_BCM1480_PM_BASE_SIZE 0x0000000000 -#define R_BCM1480_PM_CNT 0x0000000008 -#define R_BCM1480_PM_PFCNT 0x0000000010 -#define R_BCM1480_PM_LAST 0x0000000018 -#define R_BCM1480_PM_PFINDX 0x0000000020 -#define R_BCM1480_PM_INT_WMK 0x0000000028 -#define R_BCM1480_PM_CONFIG0 0x0000000030 -#define R_BCM1480_PM_LOCALDEBUG 0x0000000078 -#define R_BCM1480_PM_CACHEABILITY 0x0000000080 /* PMI only */ -#define R_BCM1480_PM_INT_CNFG 0x0000000088 -#define R_BCM1480_PM_DESC_MERGE_TIMER 0x0000000090 -#define R_BCM1480_PM_LOCALDEBUG_PIB 0x00000000F8 /* PMI only */ -#define R_BCM1480_PM_LOCALDEBUG_POB 0x00000000F8 /* PMO only */ - -/* - * Global Registers (Not Channelized) - */ - -#define A_BCM1480_PMI_GLB_0 0x0010056000 -#define A_BCM1480_PMO_GLB_0 0x0010057000 - -/* - * PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0 - */ - -#define R_BCM1480_PM_PMO_MAPPING 0x00000008C8 /* PMO only */ - -#define A_BCM1480_PM_PMO_MAPPING (A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING) - -/* - * Interrupt mapping registers - */ - - -#define A_BCM1480_PMI_INT_0 0x0010056800 -#define A_BCM1480_PMI_INT(q) (A_BCM1480_PMI_INT_0 + ((q>>8)<<8)) -#define A_BCM1480_PMI_INT_OFFSET_0 (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE) -#define A_BCM1480_PMO_INT_0 0x0010057800 -#define A_BCM1480_PMO_INT(q) (A_BCM1480_PMO_INT_0 + ((q>>8)<<8)) -#define A_BCM1480_PMO_INT_OFFSET_0 (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE) - -/* - * Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0 - */ - -#define R_BCM1480_PM_INT_ST 0x0000000000 -#define R_BCM1480_PM_INT_MSK 0x0000000040 -#define R_BCM1480_PM_INT_CLR 0x0000000080 -#define R_BCM1480_PM_MRGD_INT 0x00000000C0 - -/* - * Debug registers (global) - */ - -#define A_BCM1480_PM_GLOBALDEBUGMODE_PMI 0x0010056000 -#define A_BCM1480_PM_GLOBALDEBUG_PID 0x00100567F8 -#define A_BCM1480_PM_GLOBALDEBUG_PIB 0x0010056FF8 -#define A_BCM1480_PM_GLOBALDEBUGMODE_PMO 0x0010057000 -#define A_BCM1480_PM_GLOBALDEBUG_POD 0x00100577F8 -#define A_BCM1480_PM_GLOBALDEBUG_POB 0x0010057FF8 - -/* ********************************************************************* - * Switch performance counters - ********************************************************************* */ - -#define A_BCM1480_SWPERF_CFG 0xdfb91800 -#define A_BCM1480_SWPERF_CNT0 0xdfb91880 -#define A_BCM1480_SWPERF_CNT1 0xdfb91888 -#define A_BCM1480_SWPERF_CNT2 0xdfb91890 -#define A_BCM1480_SWPERF_CNT3 0xdfb91898 - - -/* ********************************************************************* - * Switch Trace Unit - ********************************************************************* */ - -#define A_BCM1480_SWTRC_MATCH_CONTROL_0 0xDFB91000 -#define A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 0xDFB91100 -#define A_BCM1480_SWTRC_MATCH_DATA_MASK_0 0xDFB91108 -#define A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 0xDFB91200 -#define A_BCM1480_SWTRC_MATCH_TAG_MAKS_0 0xDFB91208 -#define A_BCM1480_SWTRC_EVENT_0 0xDFB91300 -#define A_BCM1480_SWTRC_SEQUENCE_0 0xDFB91400 - -#define A_BCM1480_SWTRC_CFG 0xDFB91500 -#define A_BCM1480_SWTRC_READ 0xDFB91508 - -#define A_BCM1480_SWDEBUG_SCHEDSTOP 0xDFB92000 - -#define A_BCM1480_SWTRC_MATCH_CONTROL(x) (A_BCM1480_SWTRC_MATCH_CONTROL_0 + ((x)*8)) -#define A_BCM1480_SWTRC_EVENT(x) (A_BCM1480_SWTRC_EVENT_0 + ((x)*8)) -#define A_BCM1480_SWTRC_SEQUENCE(x) (A_BCM1480_SWTRC_SEQUENCE_0 + ((x)*8)) - -#define A_BCM1480_SWTRC_MATCH_DATA_VALUE(x) (A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 + ((x)*16)) -#define A_BCM1480_SWTRC_MATCH_DATA_MASK(x) (A_BCM1480_SWTRC_MATCH_DATA_MASK_0 + ((x)*16)) -#define A_BCM1480_SWTRC_MATCH_TAG_VALUE(x) (A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 + ((x)*16)) -#define A_BCM1480_SWTRC_MATCH_TAG_MASK(x) (A_BCM1480_SWTRC_MATCH_TAG_MASK_0 + ((x)*16)) - - - -/* ********************************************************************* - * High-Speed Port Registers (Section 13) - ********************************************************************* */ - -#define A_BCM1480_HSP_BASE_0 0x00DF810000 -#define A_BCM1480_HSP_BASE_1 0x00DF890000 -#define A_BCM1480_HSP_BASE_2 0x00DF910000 -#define BCM1480_HSP_REGISTER_SPACING 0x80000 - -#define A_BCM1480_HSP_BASE(idx) (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING)) -#define A_BCM1480_HSP_REGISTER(idx, reg) (A_BCM1480_HSP_BASE(idx) + (reg)) - -#define R_BCM1480_HSP_RX_SPI4_CFG_0 0x0000000000 -#define R_BCM1480_HSP_RX_SPI4_CFG_1 0x0000000008 -#define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010 -#define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018 -#define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN 0x0000000020 -#define R_BCM1480_HSP_RX_SPI4_PORT_INT_STATUS 0x0000000028 - -#define R_BCM1480_HSP_RX_SPI4_CALENDAR_0 0x0000000200 -#define R_BCM1480_HSP_RX_SPI4_CALENDAR_1 0x0000000208 - -#define R_BCM1480_HSP_RX_PLL_CNFG 0x0000000800 -#define R_BCM1480_HSP_RX_CALIBRATION 0x0000000808 -#define R_BCM1480_HSP_RX_TEST 0x0000000810 -#define R_BCM1480_HSP_RX_DIAG_DETAILS 0x0000000818 -#define R_BCM1480_HSP_RX_DIAG_CRC_0 0x0000000820 -#define R_BCM1480_HSP_RX_DIAG_CRC_1 0x0000000828 -#define R_BCM1480_HSP_RX_DIAG_HTCMD 0x0000000830 -#define R_BCM1480_HSP_RX_DIAG_PKTCTL 0x0000000838 - -#define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER 0x0000000870 - -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0 0x0000020020 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1 0x0000020028 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2 0x0000020030 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3 0x0000020038 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4 0x0000020040 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5 0x0000020048 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6 0x0000020050 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7 0x0000020058 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx)) - -/* XXX Following registers were shuffled. Renamed/renumbered per errata. */ -#define R_BCM1480_HSP_RX_HT_RAMALLOC_0 0x0000020078 -#define R_BCM1480_HSP_RX_HT_RAMALLOC_1 0x0000020080 -#define R_BCM1480_HSP_RX_HT_RAMALLOC_2 0x0000020088 -#define R_BCM1480_HSP_RX_HT_RAMALLOC_3 0x0000020090 -#define R_BCM1480_HSP_RX_HT_RAMALLOC_4 0x0000020098 -#define R_BCM1480_HSP_RX_HT_RAMALLOC_5 0x00000200A0 - -#define R_BCM1480_HSP_RX_SPI_WATERMARK_0 0x00000200B0 -#define R_BCM1480_HSP_RX_SPI_WATERMARK_1 0x00000200B8 -#define R_BCM1480_HSP_RX_SPI_WATERMARK_2 0x00000200C0 -#define R_BCM1480_HSP_RX_SPI_WATERMARK_3 0x00000200C8 -#define R_BCM1480_HSP_RX_SPI_WATERMARK_4 0x00000200D0 -#define R_BCM1480_HSP_RX_SPI_WATERMARK_5 0x00000200D8 -#define R_BCM1480_HSP_RX_SPI_WATERMARK_6 0x00000200E0 -#define R_BCM1480_HSP_RX_SPI_WATERMARK_7 0x00000200E8 -#define R_BCM1480_HSP_RX_SPI_WATERMARK(idx) (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx)) - -#define R_BCM1480_HSP_RX_VIS_CMDQ_0 0x00000200F0 -#define R_BCM1480_HSP_RX_VIS_CMDQ_1 0x00000200F8 -#define R_BCM1480_HSP_RX_VIS_CMDQ_2 0x0000020100 -#define R_BCM1480_HSP_RX_RAM_READCTL 0x0000020108 -#define R_BCM1480_HSP_RX_RAM_READWINDOW 0x0000020110 -#define R_BCM1480_HSP_RX_RF_READCTL 0x0000020118 -#define R_BCM1480_HSP_RX_RF_READWINDOW 0x0000020120 - -#define R_BCM1480_HSP_TX_SPI4_CFG_0 0x0000040000 -#define R_BCM1480_HSP_TX_SPI4_CFG_1 0x0000040008 -#define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT 0x0000040010 - -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0 0x0000040020 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1 0x0000040028 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2 0x0000040030 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3 0x0000040038 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4 0x0000040040 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5 0x0000040048 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6 0x0000040050 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7 0x0000040058 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx)) -#define R_BCM1480_HSP_TX_NPC_RAMALLOC 0x0000040078 -#define R_BCM1480_HSP_TX_RSP_RAMALLOC 0x0000040080 -#define R_BCM1480_HSP_TX_PC_RAMALLOC 0x0000040088 -#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0 0x0000040090 -#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1 0x0000040098 -#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2 0x00000400A0 - -#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 0x00000400B0 -#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_1 0x00000400B8 -#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2 0x00000400C0 -#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3 0x00000400C8 -#define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx)) -#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT 0x00000400D0 -#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT 0x00000400D8 - -#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 0x00000400E0 -#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1 0x00000400E8 -#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2 0x00000400F0 -#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3 0x00000400F8 -#define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx)) -#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT 0x0000040100 -#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT 0x0000040108 - -#define R_BCM1480_HSP_TX_SPI4_CALENDAR_0 0x0000040200 -#define R_BCM1480_HSP_TX_SPI4_CALENDAR_1 0x0000040208 - -#define R_BCM1480_HSP_TX_PLL_CNFG 0x0000040800 -#define R_BCM1480_HSP_TX_CALIBRATION 0x0000040808 -#define R_BCM1480_HSP_TX_TEST 0x0000040810 - -#define R_BCM1480_HSP_TX_VIS_CMDQ_0 0x0000040840 -#define R_BCM1480_HSP_TX_VIS_CMDQ_1 0x0000040848 -#define R_BCM1480_HSP_TX_VIS_CMDQ_2 0x0000040850 -#define R_BCM1480_HSP_TX_RAM_READCTL 0x0000040860 -#define R_BCM1480_HSP_TX_RAM_READWINDOW 0x0000040868 -#define R_BCM1480_HSP_TX_RF_READCTL 0x0000040870 -#define R_BCM1480_HSP_TX_RF_READWINDOW 0x0000040878 - -#define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880 -#define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN 0x0000040888 - -#define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400 -#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x) (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x)) - - - -/* ********************************************************************* - * Physical Address Map (Table 10 and Figure 7) - ********************************************************************* */ - -#define A_BCM1480_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000) -#define A_BCM1480_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024)) -#define A_BCM1480_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000) -#define A_BCM1480_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000) -#define A_BCM1480_PHYS_GENBUS _SB_MAKE64(0x0010090000) -#define A_BCM1480_PHYS_GENBUS_END _SB_MAKE64(0x0028000000) -#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES _SB_MAKE64(0x0028000000) -#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES _SB_MAKE64(0x0029000000) -#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES _SB_MAKE64(0x002C000000) -#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES _SB_MAKE64(0x002E000000) -#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES _SB_MAKE64(0x002F000000) -#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES _SB_MAKE64(0x0030000000) -#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES _SB_MAKE64(0x0040000000) -#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS _SB_MAKE64(0x0060000000) -#define A_BCM1480_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000) -#define A_BCM1480_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000) -#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS _SB_MAKE64(0x00A8000000) -#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS _SB_MAKE64(0x00A9000000) -#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS _SB_MAKE64(0x00AC000000) -#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS _SB_MAKE64(0x00AE000000) -#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS _SB_MAKE64(0x00AF000000) -#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS _SB_MAKE64(0x00B0000000) -#define A_BCM1480_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000) -#define A_BCM1480_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000) -#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000) -#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000) -#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000) -#define A_BCM1480_PHYS_HS_SUBSYS _SB_MAKE64(0x00DF000000) -#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000) -#define A_BCM1480_PHYS_HT_IO_MATCH_BITS _SB_MAKE64(0x00FC000000) -#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000) -#define A_BCM1480_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000) -#define A_BCM1480_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024)) -#define A_BCM1480_PHYS_PCI_UPPER _SB_MAKE64(0x1000000000) -#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES _SB_MAKE64(0x2000000000) -#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS _SB_MAKE64(0x3000000000) -#define A_BCM1480_PHYS_HT_NODE_ALIAS _SB_MAKE64(0x4000000000) -#define A_BCM1480_PHYS_HT_FULLACCESS _SB_MAKE64(0xF000000000) - - -/* ********************************************************************* - * L2 Cache as RAM (Table 54) - ********************************************************************* */ - -#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000) -#define BCM1480_PHYS_L2CACHE_NUM_WAYS 8 -#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000100000) -#define A_BCM1480_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0300000) -#define A_BCM1480_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D0320000) -#define A_BCM1480_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D0340000) -#define A_BCM1480_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D0360000) -#define A_BCM1480_PHYS_L2CACHE_WAY4 _SB_MAKE64(0x00D0380000) -#define A_BCM1480_PHYS_L2CACHE_WAY5 _SB_MAKE64(0x00D03A0000) -#define A_BCM1480_PHYS_L2CACHE_WAY6 _SB_MAKE64(0x00D03C0000) -#define A_BCM1480_PHYS_L2CACHE_WAY7 _SB_MAKE64(0x00D03E0000) - -#endif /* _BCM1480_REGS_H */ diff --git a/include/asm-mips/sibyte/bcm1480_scd.h b/include/asm-mips/sibyte/bcm1480_scd.h deleted file mode 100644 index 25ef24cbb92a..000000000000 --- a/include/asm-mips/sibyte/bcm1480_scd.h +++ /dev/null @@ -1,406 +0,0 @@ -/* ********************************************************************* - * BCM1280/BCM1400 Board Support Package - * - * SCD Constants and Macros File: bcm1480_scd.h - * - * This module contains constants and macros useful for - * manipulating the System Control and Debug module. - * - * BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03) - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003,2004,2005 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - -#ifndef _BCM1480_SCD_H -#define _BCM1480_SCD_H - -#include "sb1250_defs.h" - -/* ********************************************************************* - * Pull in the BCM1250's SCD since lots of stuff is the same. - ********************************************************************* */ - -#include "sb1250_scd.h" - -/* ********************************************************************* - * Some general notes: - * - * This file is basically a "what's new" header file. Since the - * BCM1250 and the new BCM1480 (and derivatives) share many common - * features, this file contains only what's new or changed from - * the 1250. (above, you can see that we include the 1250 symbols - * to get the base functionality). - * - * In software, be sure to use the correct symbols, particularly - * for blocks that are different between the two chip families. - * All BCM1480-specific symbols have _BCM1480_ in their names, - * and all BCM1250-specific and "base" functions that are common in - * both chips have no special names (this is for compatibility with - * older include files). Therefore, if you're working with the - * SCD, which is very different on each chip, A_SCD_xxx implies - * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480 - * version. - ********************************************************************* */ - -/* ********************************************************************* - * System control/debug registers - ********************************************************************* */ - -/* - * System Identification and Revision Register (Table 12) - * Register: SCD_SYSTEM_REVISION - * This register is field compatible with the 1250. - */ - -/* - * New part definitions - */ - -#define K_SYS_PART_BCM1480 0x1406 -#define K_SYS_PART_BCM1280 0x1206 -#define K_SYS_PART_BCM1455 0x1407 -#define K_SYS_PART_BCM1255 0x1257 -#define K_SYS_PART_BCM1158 0x1156 - -/* - * Manufacturing Information Register (Table 14) - * Register: SCD_SYSTEM_MANUF - */ - -/* - * System Configuration Register (Table 15) - * Register: SCD_SYSTEM_CFG - * Entire register is different from 1250, all new constants below - */ - -#define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0) -#define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1) -#define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2) -#define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3) -#define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4) -#define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5) - -#define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6) -#define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV) -#define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV) -#define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV) - -#define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11) -#define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV) -#define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV) -#define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV) - -#define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) -#define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17) - -#define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18) -#define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE) -#define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE) -#define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE) -#define K_BCM1480_SYS_BOOT_MODE_ROM32 0 -#define K_BCM1480_SYS_BOOT_MODE_ROM8 1 -#define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2 -#define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG 3 -#define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19) - -#define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20) -#define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21) -#define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) -#define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23) -#define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24) -#define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25) - -#define S_BCM1480_SYS_CONFIG 26 -#define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG) -#define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG) -#define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG) - -#define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32, 15) - -#define S_BCM1480_SYS_NODEID 47 -#define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID) -#define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID) -#define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID) - -#define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51) -#define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52) -#define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53) -#define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54) -#define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55) -#define S_BCM1480_SYS_DISABLECPU0 56 -#define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0) -#define S_BCM1480_SYS_DISABLECPU1 57 -#define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1) -#define S_BCM1480_SYS_DISABLECPU2 58 -#define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2) -#define S_BCM1480_SYS_DISABLECPU3 59 -#define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3) - -#define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60) -#define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61) -#define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62) -#define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63) - -/* - * Scratch Register (Table 16) - * Register: SCD_SYSTEM_SCRATCH - * Same as BCM1250 - */ - - -/* - * Mailbox Registers (Table 17) - * Registers: SCD_MBOX_{0,1}_CPU_x - * Same as BCM1250 - */ - - -/* - * See bcm1480_int.h for interrupt mapper registers. - */ - - -/* - * Watchdog Timer Initial Count Registers (Table 23) - * Registers: SCD_WDOG_INIT_CNT_x - * - * The watchdogs are almost the same as the 1250, except - * the configuration register has more bits to control the - * other CPUs. - */ - - -/* - * Watchdog Timer Configuration Registers (Table 25) - * Registers: SCD_WDOG_CFG_x - */ - -#define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0) - -#define S_BCM1480_SCD_WDOG_RESET_TYPE 2 -#define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE) -#define V_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE) -#define G_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE, M_BCM1480_SCD_WDOG_RESET_TYPE) - -#define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ -#define K_BCM1480_SCD_WDOG_RESET_SOFT 1 -#define K_BCM1480_SCD_WDOG_RESET_CPU0 3 -#define K_BCM1480_SCD_WDOG_RESET_CPU1 5 -#define K_BCM1480_SCD_WDOG_RESET_CPU2 9 -#define K_BCM1480_SCD_WDOG_RESET_CPU3 17 -#define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS 31 - - -#define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8) - -/* - * General Timer Initial Count Registers (Table 26) - * Registers: SCD_TIMER_INIT_x - * - * The timer registers are the same as the BCM1250 - */ - - -/* - * ZBbus Count Register (Table 29) - * Register: ZBBUS_CYCLE_COUNT - * - * Same as BCM1250 - */ - -/* - * ZBbus Compare Registers (Table 30) - * Registers: ZBBUS_CYCLE_CPx - * - * Same as BCM1250 - */ - - -/* - * System Performance Counter Configuration Register (Table 31) - * Register: PERF_CNT_CFG_0 - * - * SPC_CFG_SRC[0-3] is the same as the 1250. - * SPC_CFG_SRC[4-7] only exist on the 1480 - * The clear/enable bits are in different locations on the 1250 and 1480. - */ - -#define S_SPC_CFG_SRC4 32 -#define M_SPC_CFG_SRC4 _SB_MAKEMASK(8, S_SPC_CFG_SRC4) -#define V_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC4) -#define G_SPC_CFG_SRC4(x) _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4) - -#define S_SPC_CFG_SRC5 40 -#define M_SPC_CFG_SRC5 _SB_MAKEMASK(8, S_SPC_CFG_SRC5) -#define V_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC5) -#define G_SPC_CFG_SRC5(x) _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5) - -#define S_SPC_CFG_SRC6 48 -#define M_SPC_CFG_SRC6 _SB_MAKEMASK(8, S_SPC_CFG_SRC6) -#define V_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC6) -#define G_SPC_CFG_SRC6(x) _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6) - -#define S_SPC_CFG_SRC7 56 -#define M_SPC_CFG_SRC7 _SB_MAKEMASK(8, S_SPC_CFG_SRC7) -#define V_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC7) -#define G_SPC_CFG_SRC7(x) _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7) - -/* - * System Performance Counter Control Register (Table 32) - * Register: PERF_CNT_CFG_1 - * BCM1480 specific - */ -#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0) -#define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1) -#if SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_SPC_CFG_CLEAR M_BCM1480_SPC_CFG_CLEAR -#define M_SPC_CFG_ENABLE M_BCM1480_SPC_CFG_ENABLE -#endif - -/* - * System Performance Counters (Table 33) - * Registers: PERF_CNT_x - */ - -#define S_BCM1480_SPC_CNT_COUNT 0 -#define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT) -#define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT) -#define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT) - -#define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40) - - -/* - * Bus Watcher Error Status Register (Tables 36, 37) - * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG - * Same as BCM1250. - */ - -/* - * Bus Watcher Error Data Registers (Table 38) - * Registers: BUS_ERR_DATA_x - * Same as BCM1250. - */ - -/* - * Bus Watcher L2 ECC Counter Register (Table 39) - * Register: BUS_L2_ERRORS - * Same as BCM1250. - */ - - -/* - * Bus Watcher Memory and I/O Error Counter Register (Table 40) - * Register: BUS_MEM_IO_ERRORS - * Same as BCM1250. - */ - - -/* - * Address Trap Registers - * - * Register layout same as BCM1250, almost. The bus agents - * are different, and the address trap configuration bits are - * slightly different. - */ - -#define M_BCM1480_ATRAP_INDEX _SB_MAKEMASK(4, 0) -#define M_BCM1480_ATRAP_ADDRESS _SB_MAKEMASK(40, 0) - -#define S_BCM1480_ATRAP_CFG_CNT 0 -#define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT) -#define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT) -#define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT) - -#define M_BCM1480_ATRAP_CFG_WRITE _SB_MAKEMASK1(3) -#define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4) -#define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5) -#define M_BCM1480_ATRAP_CFG_USESRC _SB_MAKEMASK1(6) -#define M_BCM1480_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7) - -#define S_BCM1480_ATRAP_CFG_AGENTID 8 -#define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID) -#define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID) -#define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID) - - -#define K_BCM1480_BUS_AGENT_CPU0 0 -#define K_BCM1480_BUS_AGENT_CPU1 1 -#define K_BCM1480_BUS_AGENT_NC 2 -#define K_BCM1480_BUS_AGENT_IOB 3 -#define K_BCM1480_BUS_AGENT_SCD 4 -#define K_BCM1480_BUS_AGENT_L2C 6 -#define K_BCM1480_BUS_AGENT_MC 7 -#define K_BCM1480_BUS_AGENT_CPU2 8 -#define K_BCM1480_BUS_AGENT_CPU3 9 -#define K_BCM1480_BUS_AGENT_PM 10 - -#define S_BCM1480_ATRAP_CFG_CATTR 12 -#define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR) -#define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR) -#define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR) - -#define K_BCM1480_ATRAP_CFG_CATTR_IGNORE 0 -#define K_BCM1480_ATRAP_CFG_CATTR_UNC 1 -#define K_BCM1480_ATRAP_CFG_CATTR_NONCOH 2 -#define K_BCM1480_ATRAP_CFG_CATTR_COHERENT 3 - -#define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14) - - -/* - * Trace Event Registers (Table 47) - * Same as BCM1250. - */ - -/* - * Trace Sequence Control Registers (Table 48) - * Registers: TRACE_SEQUENCE_x - * - * Same as BCM1250 except for two new fields. - */ - - -#define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN _SB_MAKEMASK1(25) - -#define S_BCM1480_SCD_TRSEQ_SWFUNC 26 -#define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC) -#define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC) -#define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC) - -/* - * Trace Control Register (Table 49) - * Register: TRACE_CFG - * - * BCM1480 changes to this register (other than location of the CUR_ADDR field) - * are defined below. - */ - -#define S_BCM1480_SCD_TRACE_CFG_MODE 16 -#define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE) -#define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE) -#define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE) - -#define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS 0 -#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1 -#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2 - -#endif /* _BCM1480_SCD_H */ diff --git a/include/asm-mips/sibyte/bigsur.h b/include/asm-mips/sibyte/bigsur.h deleted file mode 100644 index ebefe797fc1d..000000000000 --- a/include/asm-mips/sibyte/bigsur.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ -#ifndef __ASM_SIBYTE_BIGSUR_H -#define __ASM_SIBYTE_BIGSUR_H - -#include -#include - -#ifdef CONFIG_SIBYTE_BIGSUR -#define SIBYTE_BOARD_NAME "BCM91x80A/B (BigSur)" -#define SIBYTE_HAVE_PCMCIA 1 -#define SIBYTE_HAVE_IDE 1 -#endif - -/* Generic bus chip selects */ -#define LEDS_CS 3 -#define LEDS_PHYS 0x100a0000 - -#ifdef SIBYTE_HAVE_IDE -#define IDE_CS 4 -#define IDE_PHYS 0x100b0000 -#define K_GPIO_GB_IDE 4 -#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) -#endif - -#ifdef SIBYTE_HAVE_PCMCIA -#define PCMCIA_CS 6 -#define PCMCIA_PHYS 0x11000000 -#define K_GPIO_PC_READY 9 -#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY) -#endif - -#endif /* __ASM_SIBYTE_BIGSUR_H */ - diff --git a/include/asm-mips/sibyte/board.h b/include/asm-mips/sibyte/board.h deleted file mode 100644 index 25372ae0e814..000000000000 --- a/include/asm-mips/sibyte/board.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef _SIBYTE_BOARD_H -#define _SIBYTE_BOARD_H - -#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_CRHONE) || \ - defined(CONFIG_SIBYTE_CRHINE) || defined(CONFIG_SIBYTE_LITTLESUR) -#include -#endif - -#if defined(CONFIG_SIBYTE_SENTOSA) || defined(CONFIG_SIBYTE_RHONE) -#include -#endif - -#ifdef CONFIG_SIBYTE_CARMEL -#include -#endif - -#ifdef CONFIG_SIBYTE_BIGSUR -#include -#endif - -#ifdef __ASSEMBLY__ - -#ifdef LEDS_PHYS -#define setleds(t0, t1, c0, c1, c2, c3) \ - li t0, (LEDS_PHYS|0xa0000000); \ - li t1, c0; \ - sb t1, 0x18(t0); \ - li t1, c1; \ - sb t1, 0x10(t0); \ - li t1, c2; \ - sb t1, 0x08(t0); \ - li t1, c3; \ - sb t1, 0x00(t0) -#else -#define setleds(t0, t1, c0, c1, c2, c3) -#endif /* LEDS_PHYS */ - -#else - -void swarm_setup(void); - -#ifdef LEDS_PHYS -extern void setleds(char *str); -#else -#define setleds(s) do { } while (0) -#endif /* LEDS_PHYS */ - -#endif /* __ASSEMBLY__ */ - -#endif /* _SIBYTE_BOARD_H */ diff --git a/include/asm-mips/sibyte/carmel.h b/include/asm-mips/sibyte/carmel.h deleted file mode 100644 index 11cad71323e8..000000000000 --- a/include/asm-mips/sibyte/carmel.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2002 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ -#ifndef __ASM_SIBYTE_CARMEL_H -#define __ASM_SIBYTE_CARMEL_H - -#include -#include - -#define SIBYTE_BOARD_NAME "Carmel" - -#define GPIO_PHY_INTERRUPT 2 -#define GPIO_NONMASKABLE_INT 3 -#define GPIO_CF_INSERTED 6 -#define GPIO_MONTEREY_RESET 7 -#define GPIO_QUADUART_INT 8 -#define GPIO_CF_INT 9 -#define GPIO_FPGA_CCLK 10 -#define GPIO_FPGA_DOUT 11 -#define GPIO_FPGA_DIN 12 -#define GPIO_FPGA_PGM 13 -#define GPIO_FPGA_DONE 14 -#define GPIO_FPGA_INIT 15 - -#define LEDS_CS 2 -#define LEDS_PHYS 0x100C0000 -#define MLEDS_CS 3 -#define MLEDS_PHYS 0x100A0000 -#define UART_CS 4 -#define UART_PHYS 0x100D0000 -#define ARAVALI_CS 5 -#define ARAVALI_PHYS 0x11000000 -#define IDE_CS 6 -#define IDE_PHYS 0x100B0000 -#define ARAVALI2_CS 7 -#define ARAVALI2_PHYS 0x100E0000 - -#if defined(CONFIG_SIBYTE_CARMEL) -#define K_GPIO_GB_IDE 9 -#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) -#endif - - -#endif /* __ASM_SIBYTE_CARMEL_H */ diff --git a/include/asm-mips/sibyte/sb1250.h b/include/asm-mips/sibyte/sb1250.h deleted file mode 100644 index 80c1a052662a..000000000000 --- a/include/asm-mips/sibyte/sb1250.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef _ASM_SIBYTE_SB1250_H -#define _ASM_SIBYTE_SB1250_H - -/* - * yymmddpp: year, month, day, patch. - * should sync with Makefile EXTRAVERSION - */ -#define SIBYTE_RELEASE 0x02111403 - -#define SB1250_NR_IRQS 64 - -#define BCM1480_NR_IRQS 128 -#define BCM1480_NR_IRQS_HALF 64 - -#define SB1250_DUART_MINOR_BASE 64 - -#ifndef __ASSEMBLY__ - -#include - -/* For revision/pass information */ -#include -#include -extern unsigned int sb1_pass; -extern unsigned int soc_pass; -extern unsigned int soc_type; -extern unsigned int periph_rev; -extern unsigned int zbbus_mhz; - -extern void sb1250_time_init(void); -extern void sb1250_mask_irq(int cpu, int irq); -extern void sb1250_unmask_irq(int cpu, int irq); - -extern void bcm1480_time_init(void); -extern void bcm1480_mask_irq(int cpu, int irq); -extern void bcm1480_unmask_irq(int cpu, int irq); - -#define AT_spin \ - __asm__ __volatile__ ( \ - ".set noat\n" \ - "li $at, 0\n" \ - "1: beqz $at, 1b\n" \ - ".set at\n" \ - ) - -#endif - -#define IOADDR(a) ((void __iomem *)(IO_BASE + (a))) - -#endif diff --git a/include/asm-mips/sibyte/sb1250_defs.h b/include/asm-mips/sibyte/sb1250_defs.h deleted file mode 100644 index 09365f9111fa..000000000000 --- a/include/asm-mips/sibyte/sb1250_defs.h +++ /dev/null @@ -1,259 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * Global constants and macros File: sb1250_defs.h - * - * This file contains macros and definitions used by the other - * include files. - * - * SB1250 specification level: User's manual 1/02/02 - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - -#ifndef _SB1250_DEFS_H -#define _SB1250_DEFS_H - -/* - * These headers require ANSI C89 string concatenation, and GCC or other - * 'long long' (64-bit integer) support. - */ -#if !defined(__STDC__) && !defined(_MSC_VER) -#error SiByte headers require ANSI C89 support -#endif - - -/* ********************************************************************* - * Macros for feature tests, used to enable include file features - * for chip features only present in certain chip revisions. - * - * SIBYTE_HDR_FEATURES may be defined to be the mask value chip/revision - * which is to be exposed by the headers. If undefined, it defaults to - * "all features." - * - * Use like: - * - * #define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_112x_PASS1 - * - * Generate defines only for that revision of chip. - * - * #if SIBYTE_HDR_FEATURE(chip,pass) - * - * True if header features for that revision or later of - * that particular chip type are enabled in SIBYTE_HDR_FEATURES. - * (Use this to bracket #defines for features present in a given - * revision and later.) - * - * Note that there is no implied ordering between chip types. - * - * Note also that 'chip' and 'pass' must textually exactly - * match the defines below. So, for example, - * SIBYTE_HDR_FEATURE(112x, PASS1) is OK, but - * SIBYTE_HDR_FEATURE(1120, pass1) is not (for two reasons). - * - * #if SIBYTE_HDR_FEATURE_UP_TO(chip,pass) - * - * Same as SIBYTE_HDR_FEATURE, but true for the named revision - * and earlier revisions of the named chip type. - * - * #if SIBYTE_HDR_FEATURE_EXACT(chip,pass) - * - * Same as SIBYTE_HDR_FEATURE, but only true for the named - * revision of the named chip type. (Note that this CANNOT - * be used to verify that you're compiling only for that - * particular chip/revision. It will be true any time this - * chip/revision is included in SIBYTE_HDR_FEATURES.) - * - * #if SIBYTE_HDR_FEATURE_CHIP(chip) - * - * True if header features for (any revision of) that chip type - * are enabled in SIBYTE_HDR_FEATURES. (Use this to bracket - * #defines for features specific to a given chip type.) - * - * Mask values currently include room for additional revisions of each - * chip type, but can be renumbered at will. Note that they MUST fit - * into 31 bits and may not include C type constructs, for safe use in - * CPP conditionals. Bit positions within chip types DO indicate - * ordering, so be careful when adding support for new minor revs. - ********************************************************************* */ - -#define SIBYTE_HDR_FMASK_1250_ALL 0x000000ff -#define SIBYTE_HDR_FMASK_1250_PASS1 0x00000001 -#define SIBYTE_HDR_FMASK_1250_PASS2 0x00000002 -#define SIBYTE_HDR_FMASK_1250_PASS3 0x00000004 - -#define SIBYTE_HDR_FMASK_112x_ALL 0x00000f00 -#define SIBYTE_HDR_FMASK_112x_PASS1 0x00000100 - -#define SIBYTE_HDR_FMASK_1480_ALL 0x0000f000 -#define SIBYTE_HDR_FMASK_1480_PASS1 0x00001000 -#define SIBYTE_HDR_FMASK_1480_PASS2 0x00002000 - -/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */ -#define SIBYTE_HDR_FMASK(chip, pass) \ - (SIBYTE_HDR_FMASK_ ## chip ## _ ## pass) -#define SIBYTE_HDR_FMASK_ALLREVS(chip) \ - (SIBYTE_HDR_FMASK_ ## chip ## _ALL) - -/* Default constant value for all chips, all revisions */ -#define SIBYTE_HDR_FMASK_ALL \ - (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \ - | SIBYTE_HDR_FMASK_1480_ALL) - -/* This one is used for the "original" BCM1250/BCM112x chips. We use this - to weed out constants and macros that do not exist on later chips like - the BCM1480 */ -#define SIBYTE_HDR_FMASK_1250_112x_ALL \ - (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL) -#define SIBYTE_HDR_FMASK_1250_112x SIBYTE_HDR_FMASK_1250_112x_ALL - -#ifndef SIBYTE_HDR_FEATURES -#define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_ALL -#endif - - -/* Bit mask for revisions of chip exclusively before the named revision. */ -#define SIBYTE_HDR_FMASK_BEFORE(chip, pass) \ - ((SIBYTE_HDR_FMASK(chip, pass) - 1) & SIBYTE_HDR_FMASK_ALLREVS(chip)) - -/* Bit mask for revisions of chip exclusively after the named revision. */ -#define SIBYTE_HDR_FMASK_AFTER(chip, pass) \ - (~(SIBYTE_HDR_FMASK(chip, pass) \ - | (SIBYTE_HDR_FMASK(chip, pass) - 1)) & SIBYTE_HDR_FMASK_ALLREVS(chip)) - - -/* True if header features enabled for (any revision of) that chip type. */ -#define SIBYTE_HDR_FEATURE_CHIP(chip) \ - (!! (SIBYTE_HDR_FMASK_ALLREVS(chip) & SIBYTE_HDR_FEATURES)) - -/* True for all versions of the BCM1250 and BCM1125, but not true for - anything else */ -#define SIBYTE_HDR_FEATURE_1250_112x \ - (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x)) -/* (!! (SIBYTE_HDR_FEATURES & SIBYHTE_HDR_FMASK_1250_112x)) */ - -/* True if header features enabled for that rev or later, inclusive. */ -#define SIBYTE_HDR_FEATURE(chip, pass) \ - (!! ((SIBYTE_HDR_FMASK(chip, pass) \ - | SIBYTE_HDR_FMASK_AFTER(chip, pass)) & SIBYTE_HDR_FEATURES)) - -/* True if header features enabled for exactly that rev. */ -#define SIBYTE_HDR_FEATURE_EXACT(chip, pass) \ - (!! (SIBYTE_HDR_FMASK(chip, pass) & SIBYTE_HDR_FEATURES)) - -/* True if header features enabled for that rev or before, inclusive. */ -#define SIBYTE_HDR_FEATURE_UP_TO(chip, pass) \ - (!! ((SIBYTE_HDR_FMASK(chip, pass) \ - | SIBYTE_HDR_FMASK_BEFORE(chip, pass)) & SIBYTE_HDR_FEATURES)) - - -/* ********************************************************************* - * Naming schemes for constants in these files: - * - * M_xxx MASK constant (identifies bits in a register). - * For multi-bit fields, all bits in the field will - * be set. - * - * K_xxx "Code" constant (value for data in a multi-bit - * field). The value is right justified. - * - * V_xxx "Value" constant. This is the same as the - * corresponding "K_xxx" constant, except it is - * shifted to the correct position in the register. - * - * S_xxx SHIFT constant. This is the number of bits that - * a field value (code) needs to be shifted - * (towards the left) to put the value in the right - * position for the register. - * - * A_xxx ADDRESS constant. This will be a physical - * address. Use the PHYS_TO_K1 macro to generate - * a K1SEG address. - * - * R_xxx RELATIVE offset constant. This is an offset from - * an A_xxx constant (usually the first register in - * a group). - * - * G_xxx(X) GET value. This macro obtains a multi-bit field - * from a register, masks it, and shifts it to - * the bottom of the register (retrieving a K_xxx - * value, for example). - * - * V_xxx(X) VALUE. This macro computes the value of a - * K_xxx constant shifted to the correct position - * in the register. - ********************************************************************* */ - - - - -/* - * Cast to 64-bit number. Presumably the syntax is different in - * assembly language. - * - * Note: you'll need to define uint32_t and uint64_t in your headers. - */ - -#if !defined(__ASSEMBLY__) -#define _SB_MAKE64(x) ((uint64_t)(x)) -#define _SB_MAKE32(x) ((uint32_t)(x)) -#else -#define _SB_MAKE64(x) (x) -#define _SB_MAKE32(x) (x) -#endif - - -/* - * Make a mask for 1 bit at position 'n' - */ - -#define _SB_MAKEMASK1(n) (_SB_MAKE64(1) << _SB_MAKE64(n)) -#define _SB_MAKEMASK1_32(n) (_SB_MAKE32(1) << _SB_MAKE32(n)) - -/* - * Make a mask for 'v' bits at position 'n' - */ - -#define _SB_MAKEMASK(v, n) (_SB_MAKE64((_SB_MAKE64(1)<<(v))-1) << _SB_MAKE64(n)) -#define _SB_MAKEMASK_32(v, n) (_SB_MAKE32((_SB_MAKE32(1)<<(v))-1) << _SB_MAKE32(n)) - -/* - * Make a value at 'v' at bit position 'n' - */ - -#define _SB_MAKEVALUE(v, n) (_SB_MAKE64(v) << _SB_MAKE64(n)) -#define _SB_MAKEVALUE_32(v, n) (_SB_MAKE32(v) << _SB_MAKE32(n)) - -#define _SB_GETVALUE(v, n, m) ((_SB_MAKE64(v) & _SB_MAKE64(m)) >> _SB_MAKE64(n)) -#define _SB_GETVALUE_32(v, n, m) ((_SB_MAKE32(v) & _SB_MAKE32(m)) >> _SB_MAKE32(n)) - -/* - * Macros to read/write on-chip registers - * XXX should we do the PHYS_TO_K1 here? - */ - - -#if defined(__mips64) && !defined(__ASSEMBLY__) -#define SBWRITECSR(csr, val) *((volatile uint64_t *) PHYS_TO_K1(csr)) = (val) -#define SBREADCSR(csr) (*((volatile uint64_t *) PHYS_TO_K1(csr))) -#endif /* __ASSEMBLY__ */ - -#endif diff --git a/include/asm-mips/sibyte/sb1250_dma.h b/include/asm-mips/sibyte/sb1250_dma.h deleted file mode 100644 index bad56171d747..000000000000 --- a/include/asm-mips/sibyte/sb1250_dma.h +++ /dev/null @@ -1,594 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * DMA definitions File: sb1250_dma.h - * - * This module contains constants and macros useful for - * programming the SB1250's DMA controllers, both the data mover - * and the Ethernet DMA. - * - * SB1250 specification level: User's manual 10/21/02 - * BCM1280 specification level: User's manual 11/24/03 - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _SB1250_DMA_H -#define _SB1250_DMA_H - - -#include "sb1250_defs.h" - -/* ********************************************************************* - * DMA Registers - ********************************************************************* */ - -/* - * Ethernet and Serial DMA Configuration Register 0 (Table 7-4) - * Registers: DMA_CONFIG0_MAC_x_RX_CH_0 - * Registers: DMA_CONFIG0_MAC_x_TX_CH_0 - * Registers: DMA_CONFIG0_SER_x_RX - * Registers: DMA_CONFIG0_SER_x_TX - */ - - -#define M_DMA_DROP _SB_MAKEMASK1(0) - -#define M_DMA_CHAIN_SEL _SB_MAKEMASK1(1) -#define M_DMA_RESERVED1 _SB_MAKEMASK1(2) - -#define S_DMA_DESC_TYPE _SB_MAKE64(1) -#define M_DMA_DESC_TYPE _SB_MAKEMASK(2, S_DMA_DESC_TYPE) -#define V_DMA_DESC_TYPE(x) _SB_MAKEVALUE(x, S_DMA_DESC_TYPE) -#define G_DMA_DESC_TYPE(x) _SB_GETVALUE(x, S_DMA_DESC_TYPE, M_DMA_DESC_TYPE) - -#define K_DMA_DESC_TYPE_RING_AL 0 -#define K_DMA_DESC_TYPE_CHAIN_AL 1 - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define K_DMA_DESC_TYPE_RING_UAL_WI 2 -#define K_DMA_DESC_TYPE_RING_UAL_RMW 3 -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -#define M_DMA_EOP_INT_EN _SB_MAKEMASK1(3) -#define M_DMA_HWM_INT_EN _SB_MAKEMASK1(4) -#define M_DMA_LWM_INT_EN _SB_MAKEMASK1(5) -#define M_DMA_TBX_EN _SB_MAKEMASK1(6) -#define M_DMA_TDX_EN _SB_MAKEMASK1(7) - -#define S_DMA_INT_PKTCNT _SB_MAKE64(8) -#define M_DMA_INT_PKTCNT _SB_MAKEMASK(8, S_DMA_INT_PKTCNT) -#define V_DMA_INT_PKTCNT(x) _SB_MAKEVALUE(x, S_DMA_INT_PKTCNT) -#define G_DMA_INT_PKTCNT(x) _SB_GETVALUE(x, S_DMA_INT_PKTCNT, M_DMA_INT_PKTCNT) - -#define S_DMA_RINGSZ _SB_MAKE64(16) -#define M_DMA_RINGSZ _SB_MAKEMASK(16, S_DMA_RINGSZ) -#define V_DMA_RINGSZ(x) _SB_MAKEVALUE(x, S_DMA_RINGSZ) -#define G_DMA_RINGSZ(x) _SB_GETVALUE(x, S_DMA_RINGSZ, M_DMA_RINGSZ) - -#define S_DMA_HIGH_WATERMARK _SB_MAKE64(32) -#define M_DMA_HIGH_WATERMARK _SB_MAKEMASK(16, S_DMA_HIGH_WATERMARK) -#define V_DMA_HIGH_WATERMARK(x) _SB_MAKEVALUE(x, S_DMA_HIGH_WATERMARK) -#define G_DMA_HIGH_WATERMARK(x) _SB_GETVALUE(x, S_DMA_HIGH_WATERMARK, M_DMA_HIGH_WATERMARK) - -#define S_DMA_LOW_WATERMARK _SB_MAKE64(48) -#define M_DMA_LOW_WATERMARK _SB_MAKEMASK(16, S_DMA_LOW_WATERMARK) -#define V_DMA_LOW_WATERMARK(x) _SB_MAKEVALUE(x, S_DMA_LOW_WATERMARK) -#define G_DMA_LOW_WATERMARK(x) _SB_GETVALUE(x, S_DMA_LOW_WATERMARK, M_DMA_LOW_WATERMARK) - -/* - * Ethernet and Serial DMA Configuration Register 1 (Table 7-5) - * Registers: DMA_CONFIG1_MAC_x_RX_CH_0 - * Registers: DMA_CONFIG1_DMA_x_TX_CH_0 - * Registers: DMA_CONFIG1_SER_x_RX - * Registers: DMA_CONFIG1_SER_x_TX - */ - -#define M_DMA_HDR_CF_EN _SB_MAKEMASK1(0) -#define M_DMA_ASIC_XFR_EN _SB_MAKEMASK1(1) -#define M_DMA_PRE_ADDR_EN _SB_MAKEMASK1(2) -#define M_DMA_FLOW_CTL_EN _SB_MAKEMASK1(3) -#define M_DMA_NO_DSCR_UPDT _SB_MAKEMASK1(4) -#define M_DMA_L2CA _SB_MAKEMASK1(5) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_DMA_RX_XTRA_STATUS _SB_MAKEMASK1(6) -#define M_DMA_TX_CPU_PAUSE _SB_MAKEMASK1(6) -#define M_DMA_TX_FC_PAUSE_EN _SB_MAKEMASK1(7) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -#define M_DMA_MBZ1 _SB_MAKEMASK(6, 15) - -#define S_DMA_HDR_SIZE _SB_MAKE64(21) -#define M_DMA_HDR_SIZE _SB_MAKEMASK(9, S_DMA_HDR_SIZE) -#define V_DMA_HDR_SIZE(x) _SB_MAKEVALUE(x, S_DMA_HDR_SIZE) -#define G_DMA_HDR_SIZE(x) _SB_GETVALUE(x, S_DMA_HDR_SIZE, M_DMA_HDR_SIZE) - -#define M_DMA_MBZ2 _SB_MAKEMASK(5, 32) - -#define S_DMA_ASICXFR_SIZE _SB_MAKE64(37) -#define M_DMA_ASICXFR_SIZE _SB_MAKEMASK(9, S_DMA_ASICXFR_SIZE) -#define V_DMA_ASICXFR_SIZE(x) _SB_MAKEVALUE(x, S_DMA_ASICXFR_SIZE) -#define G_DMA_ASICXFR_SIZE(x) _SB_GETVALUE(x, S_DMA_ASICXFR_SIZE, M_DMA_ASICXFR_SIZE) - -#define S_DMA_INT_TIMEOUT _SB_MAKE64(48) -#define M_DMA_INT_TIMEOUT _SB_MAKEMASK(16, S_DMA_INT_TIMEOUT) -#define V_DMA_INT_TIMEOUT(x) _SB_MAKEVALUE(x, S_DMA_INT_TIMEOUT) -#define G_DMA_INT_TIMEOUT(x) _SB_GETVALUE(x, S_DMA_INT_TIMEOUT, M_DMA_INT_TIMEOUT) - -/* - * Ethernet and Serial DMA Descriptor base address (Table 7-6) - */ - -#define M_DMA_DSCRBASE_MBZ _SB_MAKEMASK(4, 0) - - -/* - * ASIC Mode Base Address (Table 7-7) - */ - -#define M_DMA_ASIC_BASE_MBZ _SB_MAKEMASK(20, 0) - -/* - * DMA Descriptor Count Registers (Table 7-8) - */ - -/* No bitfields */ - - -/* - * Current Descriptor Address Register (Table 7-11) - */ - -#define S_DMA_CURDSCR_ADDR _SB_MAKE64(0) -#define M_DMA_CURDSCR_ADDR _SB_MAKEMASK(40, S_DMA_CURDSCR_ADDR) -#define S_DMA_CURDSCR_COUNT _SB_MAKE64(40) -#define M_DMA_CURDSCR_COUNT _SB_MAKEMASK(16, S_DMA_CURDSCR_COUNT) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_DMA_TX_CH_PAUSE_ON _SB_MAKEMASK1(56) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -/* - * Receive Packet Drop Registers - */ -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_DMA_OODLOST_RX _SB_MAKE64(0) -#define M_DMA_OODLOST_RX _SB_MAKEMASK(16, S_DMA_OODLOST_RX) -#define G_DMA_OODLOST_RX(x) _SB_GETVALUE(x, S_DMA_OODLOST_RX, M_DMA_OODLOST_RX) - -#define S_DMA_EOP_COUNT_RX _SB_MAKE64(16) -#define M_DMA_EOP_COUNT_RX _SB_MAKEMASK(8, S_DMA_EOP_COUNT_RX) -#define G_DMA_EOP_COUNT_RX(x) _SB_GETVALUE(x, S_DMA_EOP_COUNT_RX, M_DMA_EOP_COUNT_RX) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -/* ********************************************************************* - * DMA Descriptors - ********************************************************************* */ - -/* - * Descriptor doubleword "A" (Table 7-12) - */ - -#define S_DMA_DSCRA_OFFSET _SB_MAKE64(0) -#define M_DMA_DSCRA_OFFSET _SB_MAKEMASK(5, S_DMA_DSCRA_OFFSET) -#define V_DMA_DSCRA_OFFSET(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_OFFSET) -#define G_DMA_DSCRA_OFFSET(x) _SB_GETVALUE(x, S_DMA_DSCRA_OFFSET, M_DMA_DSCRA_OFFSET) - -/* Note: Don't shift the address over, just mask it with the mask below */ -#define S_DMA_DSCRA_A_ADDR _SB_MAKE64(5) -#define M_DMA_DSCRA_A_ADDR _SB_MAKEMASK(35, S_DMA_DSCRA_A_ADDR) - -#define M_DMA_DSCRA_A_ADDR_OFFSET (M_DMA_DSCRA_OFFSET | M_DMA_DSCRA_A_ADDR) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_DMA_DSCRA_A_ADDR_UA _SB_MAKE64(0) -#define M_DMA_DSCRA_A_ADDR_UA _SB_MAKEMASK(40, S_DMA_DSCRA_A_ADDR_UA) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -#define S_DMA_DSCRA_A_SIZE _SB_MAKE64(40) -#define M_DMA_DSCRA_A_SIZE _SB_MAKEMASK(9, S_DMA_DSCRA_A_SIZE) -#define V_DMA_DSCRA_A_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_A_SIZE) -#define G_DMA_DSCRA_A_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRA_A_SIZE, M_DMA_DSCRA_A_SIZE) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_DMA_DSCRA_DSCR_CNT _SB_MAKE64(40) -#define M_DMA_DSCRA_DSCR_CNT _SB_MAKEMASK(8, S_DMA_DSCRA_DSCR_CNT) -#define G_DMA_DSCRA_DSCR_CNT(x) _SB_GETVALUE(x, S_DMA_DSCRA_DSCR_CNT, M_DMA_DSCRA_DSCR_CNT) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -#define M_DMA_DSCRA_INTERRUPT _SB_MAKEMASK1(49) -#define M_DMA_DSCRA_OFFSETB _SB_MAKEMASK1(50) - -#define S_DMA_DSCRA_STATUS _SB_MAKE64(51) -#define M_DMA_DSCRA_STATUS _SB_MAKEMASK(13, S_DMA_DSCRA_STATUS) -#define V_DMA_DSCRA_STATUS(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_STATUS) -#define G_DMA_DSCRA_STATUS(x) _SB_GETVALUE(x, S_DMA_DSCRA_STATUS, M_DMA_DSCRA_STATUS) - -/* - * Descriptor doubleword "B" (Table 7-13) - */ - - -#define S_DMA_DSCRB_OPTIONS _SB_MAKE64(0) -#define M_DMA_DSCRB_OPTIONS _SB_MAKEMASK(4, S_DMA_DSCRB_OPTIONS) -#define V_DMA_DSCRB_OPTIONS(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_OPTIONS) -#define G_DMA_DSCRB_OPTIONS(x) _SB_GETVALUE(x, S_DMA_DSCRB_OPTIONS, M_DMA_DSCRB_OPTIONS) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_DMA_DSCRB_A_SIZE _SB_MAKE64(8) -#define M_DMA_DSCRB_A_SIZE _SB_MAKEMASK(14, S_DMA_DSCRB_A_SIZE) -#define V_DMA_DSCRB_A_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_A_SIZE) -#define G_DMA_DSCRB_A_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_A_SIZE, M_DMA_DSCRB_A_SIZE) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -#define R_DMA_DSCRB_ADDR _SB_MAKE64(0x10) - -/* Note: Don't shift the address over, just mask it with the mask below */ -#define S_DMA_DSCRB_B_ADDR _SB_MAKE64(5) -#define M_DMA_DSCRB_B_ADDR _SB_MAKEMASK(35, S_DMA_DSCRB_B_ADDR) - -#define S_DMA_DSCRB_B_SIZE _SB_MAKE64(40) -#define M_DMA_DSCRB_B_SIZE _SB_MAKEMASK(9, S_DMA_DSCRB_B_SIZE) -#define V_DMA_DSCRB_B_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_B_SIZE) -#define G_DMA_DSCRB_B_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_B_SIZE, M_DMA_DSCRB_B_SIZE) - -#define M_DMA_DSCRB_B_VALID _SB_MAKEMASK1(49) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKE64(48) -#define M_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKEMASK(2, S_DMA_DSCRB_PKT_SIZE_MSB) -#define V_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB) -#define G_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB, M_DMA_DSCRB_PKT_SIZE_MSB) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -#define S_DMA_DSCRB_PKT_SIZE _SB_MAKE64(50) -#define M_DMA_DSCRB_PKT_SIZE _SB_MAKEMASK(14, S_DMA_DSCRB_PKT_SIZE) -#define V_DMA_DSCRB_PKT_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE) -#define G_DMA_DSCRB_PKT_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE, M_DMA_DSCRB_PKT_SIZE) - -/* - * from pass2 some bits in dscr_b are also used for rx status - */ -#define S_DMA_DSCRB_STATUS _SB_MAKE64(0) -#define M_DMA_DSCRB_STATUS _SB_MAKEMASK(1, S_DMA_DSCRB_STATUS) -#define V_DMA_DSCRB_STATUS(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_STATUS) -#define G_DMA_DSCRB_STATUS(x) _SB_GETVALUE(x, S_DMA_DSCRB_STATUS, M_DMA_DSCRB_STATUS) - -/* - * Ethernet Descriptor Status Bits (Table 7-15) - */ - -#define M_DMA_ETHRX_BADIP4CS _SB_MAKEMASK1(51) -#define M_DMA_ETHRX_DSCRERR _SB_MAKEMASK1(52) - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -/* Note: This bit is in the DSCR_B options field */ -#define M_DMA_ETHRX_BADTCPCS _SB_MAKEMASK1(0) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -/* Note: These bits are in the DSCR_B options field */ -#define M_DMA_ETH_VLAN_FLAG _SB_MAKEMASK1(1) -#define M_DMA_ETH_CRC_FLAG _SB_MAKEMASK1(2) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -#define S_DMA_ETHRX_RXCH 53 -#define M_DMA_ETHRX_RXCH _SB_MAKEMASK(2, S_DMA_ETHRX_RXCH) -#define V_DMA_ETHRX_RXCH(x) _SB_MAKEVALUE(x, S_DMA_ETHRX_RXCH) -#define G_DMA_ETHRX_RXCH(x) _SB_GETVALUE(x, S_DMA_ETHRX_RXCH, M_DMA_ETHRX_RXCH) - -#define S_DMA_ETHRX_PKTTYPE 55 -#define M_DMA_ETHRX_PKTTYPE _SB_MAKEMASK(3, S_DMA_ETHRX_PKTTYPE) -#define V_DMA_ETHRX_PKTTYPE(x) _SB_MAKEVALUE(x, S_DMA_ETHRX_PKTTYPE) -#define G_DMA_ETHRX_PKTTYPE(x) _SB_GETVALUE(x, S_DMA_ETHRX_PKTTYPE, M_DMA_ETHRX_PKTTYPE) - -#define K_DMA_ETHRX_PKTTYPE_IPV4 0 -#define K_DMA_ETHRX_PKTTYPE_ARPV4 1 -#define K_DMA_ETHRX_PKTTYPE_802 2 -#define K_DMA_ETHRX_PKTTYPE_OTHER 3 -#define K_DMA_ETHRX_PKTTYPE_USER0 4 -#define K_DMA_ETHRX_PKTTYPE_USER1 5 -#define K_DMA_ETHRX_PKTTYPE_USER2 6 -#define K_DMA_ETHRX_PKTTYPE_USER3 7 - -#define M_DMA_ETHRX_MATCH_HASH _SB_MAKEMASK1(58) -#define M_DMA_ETHRX_MATCH_EXACT _SB_MAKEMASK1(59) -#define M_DMA_ETHRX_BCAST _SB_MAKEMASK1(60) -#define M_DMA_ETHRX_MCAST _SB_MAKEMASK1(61) -#define M_DMA_ETHRX_BAD _SB_MAKEMASK1(62) -#define M_DMA_ETHRX_SOP _SB_MAKEMASK1(63) - -/* - * Ethernet Transmit Status Bits (Table 7-16) - */ - -#define M_DMA_ETHTX_SOP _SB_MAKEMASK1(63) - -/* - * Ethernet Transmit Options (Table 7-17) - */ - -#define K_DMA_ETHTX_NOTSOP _SB_MAKE64(0x00) -#define K_DMA_ETHTX_APPENDCRC _SB_MAKE64(0x01) -#define K_DMA_ETHTX_REPLACECRC _SB_MAKE64(0x02) -#define K_DMA_ETHTX_APPENDCRC_APPENDPAD _SB_MAKE64(0x03) -#define K_DMA_ETHTX_APPENDVLAN_REPLACECRC _SB_MAKE64(0x04) -#define K_DMA_ETHTX_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x05) -#define K_DMA_ETHTX_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x6) -#define K_DMA_ETHTX_NOMODS _SB_MAKE64(0x07) -#define K_DMA_ETHTX_RESERVED1 _SB_MAKE64(0x08) -#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC _SB_MAKE64(0x09) -#define K_DMA_ETHTX_REPLACESADDR_REPLACECRC _SB_MAKE64(0x0A) -#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC_APPENDPAD _SB_MAKE64(0x0B) -#define K_DMA_ETHTX_REPLACESADDR_APPENDVLAN_REPLACECRC _SB_MAKE64(0x0C) -#define K_DMA_ETHTX_REPLACESADDR_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x0D) -#define K_DMA_ETHTX_REPLACESADDR_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x0E) -#define K_DMA_ETHTX_RESERVED2 _SB_MAKE64(0x0F) - -/* - * Serial Receive Options (Table 7-18) - */ -#define M_DMA_SERRX_CRC_ERROR _SB_MAKEMASK1(56) -#define M_DMA_SERRX_ABORT _SB_MAKEMASK1(57) -#define M_DMA_SERRX_OCTET_ERROR _SB_MAKEMASK1(58) -#define M_DMA_SERRX_LONGFRAME_ERROR _SB_MAKEMASK1(59) -#define M_DMA_SERRX_SHORTFRAME_ERROR _SB_MAKEMASK1(60) -#define M_DMA_SERRX_OVERRUN_ERROR _SB_MAKEMASK1(61) -#define M_DMA_SERRX_GOOD _SB_MAKEMASK1(62) -#define M_DMA_SERRX_SOP _SB_MAKEMASK1(63) - -/* - * Serial Transmit Status Bits (Table 7-20) - */ - -#define M_DMA_SERTX_FLAG _SB_MAKEMASK1(63) - -/* - * Serial Transmit Options (Table 7-21) - */ - -#define K_DMA_SERTX_RESERVED _SB_MAKEMASK1(0) -#define K_DMA_SERTX_APPENDCRC _SB_MAKEMASK1(1) -#define K_DMA_SERTX_APPENDPAD _SB_MAKEMASK1(2) -#define K_DMA_SERTX_ABORT _SB_MAKEMASK1(3) - - -/* ********************************************************************* - * Data Mover Registers - ********************************************************************* */ - -/* - * Data Mover Descriptor Base Address Register (Table 7-22) - * Register: DM_DSCR_BASE_0 - * Register: DM_DSCR_BASE_1 - * Register: DM_DSCR_BASE_2 - * Register: DM_DSCR_BASE_3 - */ - -#define M_DM_DSCR_BASE_MBZ _SB_MAKEMASK(4, 0) - -/* Note: Just mask the base address and then OR it in. */ -#define S_DM_DSCR_BASE_ADDR _SB_MAKE64(4) -#define M_DM_DSCR_BASE_ADDR _SB_MAKEMASK(36, S_DM_DSCR_BASE_ADDR) - -#define S_DM_DSCR_BASE_RINGSZ _SB_MAKE64(40) -#define M_DM_DSCR_BASE_RINGSZ _SB_MAKEMASK(16, S_DM_DSCR_BASE_RINGSZ) -#define V_DM_DSCR_BASE_RINGSZ(x) _SB_MAKEVALUE(x, S_DM_DSCR_BASE_RINGSZ) -#define G_DM_DSCR_BASE_RINGSZ(x) _SB_GETVALUE(x, S_DM_DSCR_BASE_RINGSZ, M_DM_DSCR_BASE_RINGSZ) - -#define S_DM_DSCR_BASE_PRIORITY _SB_MAKE64(56) -#define M_DM_DSCR_BASE_PRIORITY _SB_MAKEMASK(3, S_DM_DSCR_BASE_PRIORITY) -#define V_DM_DSCR_BASE_PRIORITY(x) _SB_MAKEVALUE(x, S_DM_DSCR_BASE_PRIORITY) -#define G_DM_DSCR_BASE_PRIORITY(x) _SB_GETVALUE(x, S_DM_DSCR_BASE_PRIORITY, M_DM_DSCR_BASE_PRIORITY) - -#define K_DM_DSCR_BASE_PRIORITY_1 0 -#define K_DM_DSCR_BASE_PRIORITY_2 1 -#define K_DM_DSCR_BASE_PRIORITY_4 2 -#define K_DM_DSCR_BASE_PRIORITY_8 3 -#define K_DM_DSCR_BASE_PRIORITY_16 4 - -#define M_DM_DSCR_BASE_ACTIVE _SB_MAKEMASK1(59) -#define M_DM_DSCR_BASE_INTERRUPT _SB_MAKEMASK1(60) -#define M_DM_DSCR_BASE_RESET _SB_MAKEMASK1(61) /* write register */ -#define M_DM_DSCR_BASE_ERROR _SB_MAKEMASK1(61) /* read register */ -#define M_DM_DSCR_BASE_ABORT _SB_MAKEMASK1(62) -#define M_DM_DSCR_BASE_ENABL _SB_MAKEMASK1(63) - -/* - * Data Mover Descriptor Count Register (Table 7-25) - */ - -/* no bitfields */ - -/* - * Data Mover Current Descriptor Address (Table 7-24) - * Register: DM_CUR_DSCR_ADDR_0 - * Register: DM_CUR_DSCR_ADDR_1 - * Register: DM_CUR_DSCR_ADDR_2 - * Register: DM_CUR_DSCR_ADDR_3 - */ - -#define S_DM_CUR_DSCR_DSCR_ADDR _SB_MAKE64(0) -#define M_DM_CUR_DSCR_DSCR_ADDR _SB_MAKEMASK(40, S_DM_CUR_DSCR_DSCR_ADDR) - -#define S_DM_CUR_DSCR_DSCR_COUNT _SB_MAKE64(48) -#define M_DM_CUR_DSCR_DSCR_COUNT _SB_MAKEMASK(16, S_DM_CUR_DSCR_DSCR_COUNT) -#define V_DM_CUR_DSCR_DSCR_COUNT(r) _SB_MAKEVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT) -#define G_DM_CUR_DSCR_DSCR_COUNT(r) _SB_GETVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT,\ - M_DM_CUR_DSCR_DSCR_COUNT) - - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -/* - * Data Mover Channel Partial Result Registers - * Register: DM_PARTIAL_0 - * Register: DM_PARTIAL_1 - * Register: DM_PARTIAL_2 - * Register: DM_PARTIAL_3 - */ -#define S_DM_PARTIAL_CRC_PARTIAL _SB_MAKE64(0) -#define M_DM_PARTIAL_CRC_PARTIAL _SB_MAKEMASK(32, S_DM_PARTIAL_CRC_PARTIAL) -#define V_DM_PARTIAL_CRC_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_CRC_PARTIAL) -#define G_DM_PARTIAL_CRC_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_CRC_PARTIAL,\ - M_DM_PARTIAL_CRC_PARTIAL) - -#define S_DM_PARTIAL_TCPCS_PARTIAL _SB_MAKE64(32) -#define M_DM_PARTIAL_TCPCS_PARTIAL _SB_MAKEMASK(16, S_DM_PARTIAL_TCPCS_PARTIAL) -#define V_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL) -#define G_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL,\ - M_DM_PARTIAL_TCPCS_PARTIAL) - -#define M_DM_PARTIAL_ODD_BYTE _SB_MAKEMASK1(48) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -/* - * Data Mover CRC Definition Registers - * Register: CRC_DEF_0 - * Register: CRC_DEF_1 - */ -#define S_CRC_DEF_CRC_INIT _SB_MAKE64(0) -#define M_CRC_DEF_CRC_INIT _SB_MAKEMASK(32, S_CRC_DEF_CRC_INIT) -#define V_CRC_DEF_CRC_INIT(r) _SB_MAKEVALUE(r, S_CRC_DEF_CRC_INIT) -#define G_CRC_DEF_CRC_INIT(r) _SB_GETVALUE(r, S_CRC_DEF_CRC_INIT,\ - M_CRC_DEF_CRC_INIT) - -#define S_CRC_DEF_CRC_POLY _SB_MAKE64(32) -#define M_CRC_DEF_CRC_POLY _SB_MAKEMASK(32, S_CRC_DEF_CRC_POLY) -#define V_CRC_DEF_CRC_POLY(r) _SB_MAKEVALUE(r, S_CRC_DEF_CRC_POLY) -#define G_CRC_DEF_CRC_POLY(r) _SB_GETVALUE(r, S_CRC_DEF_CRC_POLY,\ - M_CRC_DEF_CRC_POLY) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -/* - * Data Mover CRC/Checksum Definition Registers - * Register: CTCP_DEF_0 - * Register: CTCP_DEF_1 - */ -#define S_CTCP_DEF_CRC_TXOR _SB_MAKE64(0) -#define M_CTCP_DEF_CRC_TXOR _SB_MAKEMASK(32, S_CTCP_DEF_CRC_TXOR) -#define V_CTCP_DEF_CRC_TXOR(r) _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_TXOR) -#define G_CTCP_DEF_CRC_TXOR(r) _SB_GETVALUE(r, S_CTCP_DEF_CRC_TXOR,\ - M_CTCP_DEF_CRC_TXOR) - -#define S_CTCP_DEF_TCPCS_INIT _SB_MAKE64(32) -#define M_CTCP_DEF_TCPCS_INIT _SB_MAKEMASK(16, S_CTCP_DEF_TCPCS_INIT) -#define V_CTCP_DEF_TCPCS_INIT(r) _SB_MAKEVALUE(r, S_CTCP_DEF_TCPCS_INIT) -#define G_CTCP_DEF_TCPCS_INIT(r) _SB_GETVALUE(r, S_CTCP_DEF_TCPCS_INIT,\ - M_CTCP_DEF_TCPCS_INIT) - -#define S_CTCP_DEF_CRC_WIDTH _SB_MAKE64(48) -#define M_CTCP_DEF_CRC_WIDTH _SB_MAKEMASK(2, S_CTCP_DEF_CRC_WIDTH) -#define V_CTCP_DEF_CRC_WIDTH(r) _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_WIDTH) -#define G_CTCP_DEF_CRC_WIDTH(r) _SB_GETVALUE(r, S_CTCP_DEF_CRC_WIDTH,\ - M_CTCP_DEF_CRC_WIDTH) - -#define K_CTCP_DEF_CRC_WIDTH_4 0 -#define K_CTCP_DEF_CRC_WIDTH_2 1 -#define K_CTCP_DEF_CRC_WIDTH_1 2 - -#define M_CTCP_DEF_CRC_BIT_ORDER _SB_MAKEMASK1(50) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - - -/* - * Data Mover Descriptor Doubleword "A" (Table 7-26) - */ - -#define S_DM_DSCRA_DST_ADDR _SB_MAKE64(0) -#define M_DM_DSCRA_DST_ADDR _SB_MAKEMASK(40, S_DM_DSCRA_DST_ADDR) - -#define M_DM_DSCRA_UN_DEST _SB_MAKEMASK1(40) -#define M_DM_DSCRA_UN_SRC _SB_MAKEMASK1(41) -#define M_DM_DSCRA_INTERRUPT _SB_MAKEMASK1(42) -#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) -#define M_DM_DSCRA_THROTTLE _SB_MAKEMASK1(43) -#endif /* up to 1250 PASS1 */ - -#define S_DM_DSCRA_DIR_DEST _SB_MAKE64(44) -#define M_DM_DSCRA_DIR_DEST _SB_MAKEMASK(2, S_DM_DSCRA_DIR_DEST) -#define V_DM_DSCRA_DIR_DEST(x) _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_DEST) -#define G_DM_DSCRA_DIR_DEST(x) _SB_GETVALUE(x, S_DM_DSCRA_DIR_DEST, M_DM_DSCRA_DIR_DEST) - -#define K_DM_DSCRA_DIR_DEST_INCR 0 -#define K_DM_DSCRA_DIR_DEST_DECR 1 -#define K_DM_DSCRA_DIR_DEST_CONST 2 - -#define V_DM_DSCRA_DIR_DEST_INCR _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_INCR, S_DM_DSCRA_DIR_DEST) -#define V_DM_DSCRA_DIR_DEST_DECR _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_DECR, S_DM_DSCRA_DIR_DEST) -#define V_DM_DSCRA_DIR_DEST_CONST _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_CONST, S_DM_DSCRA_DIR_DEST) - -#define S_DM_DSCRA_DIR_SRC _SB_MAKE64(46) -#define M_DM_DSCRA_DIR_SRC _SB_MAKEMASK(2, S_DM_DSCRA_DIR_SRC) -#define V_DM_DSCRA_DIR_SRC(x) _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_SRC) -#define G_DM_DSCRA_DIR_SRC(x) _SB_GETVALUE(x, S_DM_DSCRA_DIR_SRC, M_DM_DSCRA_DIR_SRC) - -#define K_DM_DSCRA_DIR_SRC_INCR 0 -#define K_DM_DSCRA_DIR_SRC_DECR 1 -#define K_DM_DSCRA_DIR_SRC_CONST 2 - -#define V_DM_DSCRA_DIR_SRC_INCR _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_INCR, S_DM_DSCRA_DIR_SRC) -#define V_DM_DSCRA_DIR_SRC_DECR _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_DECR, S_DM_DSCRA_DIR_SRC) -#define V_DM_DSCRA_DIR_SRC_CONST _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_CONST, S_DM_DSCRA_DIR_SRC) - - -#define M_DM_DSCRA_ZERO_MEM _SB_MAKEMASK1(48) -#define M_DM_DSCRA_PREFETCH _SB_MAKEMASK1(49) -#define M_DM_DSCRA_L2C_DEST _SB_MAKEMASK1(50) -#define M_DM_DSCRA_L2C_SRC _SB_MAKEMASK1(51) - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_DM_DSCRA_RD_BKOFF _SB_MAKEMASK1(52) -#define M_DM_DSCRA_WR_BKOFF _SB_MAKEMASK1(53) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_DM_DSCRA_TCPCS_EN _SB_MAKEMASK1(54) -#define M_DM_DSCRA_TCPCS_RES _SB_MAKEMASK1(55) -#define M_DM_DSCRA_TCPCS_AP _SB_MAKEMASK1(56) -#define M_DM_DSCRA_CRC_EN _SB_MAKEMASK1(57) -#define M_DM_DSCRA_CRC_RES _SB_MAKEMASK1(58) -#define M_DM_DSCRA_CRC_AP _SB_MAKEMASK1(59) -#define M_DM_DSCRA_CRC_DFN _SB_MAKEMASK1(60) -#define M_DM_DSCRA_CRC_XBIT _SB_MAKEMASK1(61) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -#define M_DM_DSCRA_RESERVED2 _SB_MAKEMASK(3, 61) - -/* - * Data Mover Descriptor Doubleword "B" (Table 7-25) - */ - -#define S_DM_DSCRB_SRC_ADDR _SB_MAKE64(0) -#define M_DM_DSCRB_SRC_ADDR _SB_MAKEMASK(40, S_DM_DSCRB_SRC_ADDR) - -#define S_DM_DSCRB_SRC_LENGTH _SB_MAKE64(40) -#define M_DM_DSCRB_SRC_LENGTH _SB_MAKEMASK(20, S_DM_DSCRB_SRC_LENGTH) -#define V_DM_DSCRB_SRC_LENGTH(x) _SB_MAKEVALUE(x, S_DM_DSCRB_SRC_LENGTH) -#define G_DM_DSCRB_SRC_LENGTH(x) _SB_GETVALUE(x, S_DM_DSCRB_SRC_LENGTH, M_DM_DSCRB_SRC_LENGTH) - - -#endif diff --git a/include/asm-mips/sibyte/sb1250_genbus.h b/include/asm-mips/sibyte/sb1250_genbus.h deleted file mode 100644 index 94e9c7c8e783..000000000000 --- a/include/asm-mips/sibyte/sb1250_genbus.h +++ /dev/null @@ -1,474 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * Generic Bus Constants File: sb1250_genbus.h - * - * This module contains constants and macros useful for - * manipulating the SB1250's Generic Bus interface - * - * SB1250 specification level: User's manual 10/21/02 - * BCM1280 specification level: User's Manual 11/14/03 - * - ********************************************************************* - * - * Copyright 2000, 2001, 2002, 2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _SB1250_GENBUS_H -#define _SB1250_GENBUS_H - -#include "sb1250_defs.h" - -/* - * Generic Bus Region Configuration Registers (Table 11-4) - */ - -#define S_IO_RDY_ACTIVE 0 -#define M_IO_RDY_ACTIVE _SB_MAKEMASK1(S_IO_RDY_ACTIVE) - -#define S_IO_ENA_RDY 1 -#define M_IO_ENA_RDY _SB_MAKEMASK1(S_IO_ENA_RDY) - -#define S_IO_WIDTH_SEL 2 -#define M_IO_WIDTH_SEL _SB_MAKEMASK(2, S_IO_WIDTH_SEL) -#define K_IO_WIDTH_SEL_1 0 -#define K_IO_WIDTH_SEL_2 1 -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ - || SIBYTE_HDR_FEATURE_CHIP(1480) -#define K_IO_WIDTH_SEL_1L 2 -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ -#define K_IO_WIDTH_SEL_4 3 -#define V_IO_WIDTH_SEL(x) _SB_MAKEVALUE(x, S_IO_WIDTH_SEL) -#define G_IO_WIDTH_SEL(x) _SB_GETVALUE(x, S_IO_WIDTH_SEL, M_IO_WIDTH_SEL) - -#define S_IO_PARITY_ENA 4 -#define M_IO_PARITY_ENA _SB_MAKEMASK1(S_IO_PARITY_ENA) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ - || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_IO_BURST_EN 5 -#define M_IO_BURST_EN _SB_MAKEMASK1(S_IO_BURST_EN) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ -#define S_IO_PARITY_ODD 6 -#define M_IO_PARITY_ODD _SB_MAKEMASK1(S_IO_PARITY_ODD) -#define S_IO_NONMUX 7 -#define M_IO_NONMUX _SB_MAKEMASK1(S_IO_NONMUX) - -#define S_IO_TIMEOUT 8 -#define M_IO_TIMEOUT _SB_MAKEMASK(8, S_IO_TIMEOUT) -#define V_IO_TIMEOUT(x) _SB_MAKEVALUE(x, S_IO_TIMEOUT) -#define G_IO_TIMEOUT(x) _SB_GETVALUE(x, S_IO_TIMEOUT, M_IO_TIMEOUT) - -/* - * Generic Bus Region Size register (Table 11-5) - */ - -#define S_IO_MULT_SIZE 0 -#define M_IO_MULT_SIZE _SB_MAKEMASK(12, S_IO_MULT_SIZE) -#define V_IO_MULT_SIZE(x) _SB_MAKEVALUE(x, S_IO_MULT_SIZE) -#define G_IO_MULT_SIZE(x) _SB_GETVALUE(x, S_IO_MULT_SIZE, M_IO_MULT_SIZE) - -#define S_IO_REGSIZE 16 /* # bits to shift size for this reg */ - -/* - * Generic Bus Region Address (Table 11-6) - */ - -#define S_IO_START_ADDR 0 -#define M_IO_START_ADDR _SB_MAKEMASK(14, S_IO_START_ADDR) -#define V_IO_START_ADDR(x) _SB_MAKEVALUE(x, S_IO_START_ADDR) -#define G_IO_START_ADDR(x) _SB_GETVALUE(x, S_IO_START_ADDR, M_IO_START_ADDR) - -#define S_IO_ADDRBASE 16 /* # bits to shift addr for this reg */ - -#define M_IO_BLK_CACHE _SB_MAKEMASK1(15) - - -/* - * Generic Bus Timing 0 Registers (Table 11-7) - */ - -#define S_IO_ALE_WIDTH 0 -#define M_IO_ALE_WIDTH _SB_MAKEMASK(3, S_IO_ALE_WIDTH) -#define V_IO_ALE_WIDTH(x) _SB_MAKEVALUE(x, S_IO_ALE_WIDTH) -#define G_IO_ALE_WIDTH(x) _SB_GETVALUE(x, S_IO_ALE_WIDTH, M_IO_ALE_WIDTH) - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ - || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_IO_EARLY_CS _SB_MAKEMASK1(3) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - -#define S_IO_ALE_TO_CS 4 -#define M_IO_ALE_TO_CS _SB_MAKEMASK(2, S_IO_ALE_TO_CS) -#define V_IO_ALE_TO_CS(x) _SB_MAKEVALUE(x, S_IO_ALE_TO_CS) -#define G_IO_ALE_TO_CS(x) _SB_GETVALUE(x, S_IO_ALE_TO_CS, M_IO_ALE_TO_CS) - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ - || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_IO_BURST_WIDTH _SB_MAKE64(6) -#define M_IO_BURST_WIDTH _SB_MAKEMASK(2, S_IO_BURST_WIDTH) -#define V_IO_BURST_WIDTH(x) _SB_MAKEVALUE(x, S_IO_BURST_WIDTH) -#define G_IO_BURST_WIDTH(x) _SB_GETVALUE(x, S_IO_BURST_WIDTH, M_IO_BURST_WIDTH) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - -#define S_IO_CS_WIDTH 8 -#define M_IO_CS_WIDTH _SB_MAKEMASK(5, S_IO_CS_WIDTH) -#define V_IO_CS_WIDTH(x) _SB_MAKEVALUE(x, S_IO_CS_WIDTH) -#define G_IO_CS_WIDTH(x) _SB_GETVALUE(x, S_IO_CS_WIDTH, M_IO_CS_WIDTH) - -#define S_IO_RDY_SMPLE 13 -#define M_IO_RDY_SMPLE _SB_MAKEMASK(3, S_IO_RDY_SMPLE) -#define V_IO_RDY_SMPLE(x) _SB_MAKEVALUE(x, S_IO_RDY_SMPLE) -#define G_IO_RDY_SMPLE(x) _SB_GETVALUE(x, S_IO_RDY_SMPLE, M_IO_RDY_SMPLE) - - -/* - * Generic Bus Timing 1 Registers (Table 11-8) - */ - -#define S_IO_ALE_TO_WRITE 0 -#define M_IO_ALE_TO_WRITE _SB_MAKEMASK(3, S_IO_ALE_TO_WRITE) -#define V_IO_ALE_TO_WRITE(x) _SB_MAKEVALUE(x, S_IO_ALE_TO_WRITE) -#define G_IO_ALE_TO_WRITE(x) _SB_GETVALUE(x, S_IO_ALE_TO_WRITE, M_IO_ALE_TO_WRITE) - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ - || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_IO_RDY_SYNC _SB_MAKEMASK1(3) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - -#define S_IO_WRITE_WIDTH 4 -#define M_IO_WRITE_WIDTH _SB_MAKEMASK(4, S_IO_WRITE_WIDTH) -#define V_IO_WRITE_WIDTH(x) _SB_MAKEVALUE(x, S_IO_WRITE_WIDTH) -#define G_IO_WRITE_WIDTH(x) _SB_GETVALUE(x, S_IO_WRITE_WIDTH, M_IO_WRITE_WIDTH) - -#define S_IO_IDLE_CYCLE 8 -#define M_IO_IDLE_CYCLE _SB_MAKEMASK(4, S_IO_IDLE_CYCLE) -#define V_IO_IDLE_CYCLE(x) _SB_MAKEVALUE(x, S_IO_IDLE_CYCLE) -#define G_IO_IDLE_CYCLE(x) _SB_GETVALUE(x, S_IO_IDLE_CYCLE, M_IO_IDLE_CYCLE) - -#define S_IO_OE_TO_CS 12 -#define M_IO_OE_TO_CS _SB_MAKEMASK(2, S_IO_OE_TO_CS) -#define V_IO_OE_TO_CS(x) _SB_MAKEVALUE(x, S_IO_OE_TO_CS) -#define G_IO_OE_TO_CS(x) _SB_GETVALUE(x, S_IO_OE_TO_CS, M_IO_OE_TO_CS) - -#define S_IO_CS_TO_OE 14 -#define M_IO_CS_TO_OE _SB_MAKEMASK(2, S_IO_CS_TO_OE) -#define V_IO_CS_TO_OE(x) _SB_MAKEVALUE(x, S_IO_CS_TO_OE) -#define G_IO_CS_TO_OE(x) _SB_GETVALUE(x, S_IO_CS_TO_OE, M_IO_CS_TO_OE) - -/* - * Generic Bus Interrupt Status Register (Table 11-9) - */ - -#define M_IO_CS_ERR_INT _SB_MAKEMASK(0, 8) -#define M_IO_CS0_ERR_INT _SB_MAKEMASK1(0) -#define M_IO_CS1_ERR_INT _SB_MAKEMASK1(1) -#define M_IO_CS2_ERR_INT _SB_MAKEMASK1(2) -#define M_IO_CS3_ERR_INT _SB_MAKEMASK1(3) -#define M_IO_CS4_ERR_INT _SB_MAKEMASK1(4) -#define M_IO_CS5_ERR_INT _SB_MAKEMASK1(5) -#define M_IO_CS6_ERR_INT _SB_MAKEMASK1(6) -#define M_IO_CS7_ERR_INT _SB_MAKEMASK1(7) - -#define M_IO_RD_PAR_INT _SB_MAKEMASK1(9) -#define M_IO_TIMEOUT_INT _SB_MAKEMASK1(10) -#define M_IO_ILL_ADDR_INT _SB_MAKEMASK1(11) -#define M_IO_MULT_CS_INT _SB_MAKEMASK1(12) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_IO_COH_ERR _SB_MAKEMASK1(14) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - - -/* - * Generic Bus Output Drive Control Register 0 (Table 14-18) - */ - -#define S_IO_SLEW0 0 -#define M_IO_SLEW0 _SB_MAKEMASK(2, S_IO_SLEW0) -#define V_IO_SLEW0(x) _SB_MAKEVALUE(x, S_IO_SLEW0) -#define G_IO_SLEW0(x) _SB_GETVALUE(x, S_IO_SLEW0, M_IO_SLEW0) - -#define S_IO_DRV_A 2 -#define M_IO_DRV_A _SB_MAKEMASK(2, S_IO_DRV_A) -#define V_IO_DRV_A(x) _SB_MAKEVALUE(x, S_IO_DRV_A) -#define G_IO_DRV_A(x) _SB_GETVALUE(x, S_IO_DRV_A, M_IO_DRV_A) - -#define S_IO_DRV_B 6 -#define M_IO_DRV_B _SB_MAKEMASK(2, S_IO_DRV_B) -#define V_IO_DRV_B(x) _SB_MAKEVALUE(x, S_IO_DRV_B) -#define G_IO_DRV_B(x) _SB_GETVALUE(x, S_IO_DRV_B, M_IO_DRV_B) - -#define S_IO_DRV_C 10 -#define M_IO_DRV_C _SB_MAKEMASK(2, S_IO_DRV_C) -#define V_IO_DRV_C(x) _SB_MAKEVALUE(x, S_IO_DRV_C) -#define G_IO_DRV_C(x) _SB_GETVALUE(x, S_IO_DRV_C, M_IO_DRV_C) - -#define S_IO_DRV_D 14 -#define M_IO_DRV_D _SB_MAKEMASK(2, S_IO_DRV_D) -#define V_IO_DRV_D(x) _SB_MAKEVALUE(x, S_IO_DRV_D) -#define G_IO_DRV_D(x) _SB_GETVALUE(x, S_IO_DRV_D, M_IO_DRV_D) - -/* - * Generic Bus Output Drive Control Register 1 (Table 14-19) - */ - -#define S_IO_DRV_E 2 -#define M_IO_DRV_E _SB_MAKEMASK(2, S_IO_DRV_E) -#define V_IO_DRV_E(x) _SB_MAKEVALUE(x, S_IO_DRV_E) -#define G_IO_DRV_E(x) _SB_GETVALUE(x, S_IO_DRV_E, M_IO_DRV_E) - -#define S_IO_DRV_F 6 -#define M_IO_DRV_F _SB_MAKEMASK(2, S_IO_DRV_F) -#define V_IO_DRV_F(x) _SB_MAKEVALUE(x, S_IO_DRV_F) -#define G_IO_DRV_F(x) _SB_GETVALUE(x, S_IO_DRV_F, M_IO_DRV_F) - -#define S_IO_SLEW1 8 -#define M_IO_SLEW1 _SB_MAKEMASK(2, S_IO_SLEW1) -#define V_IO_SLEW1(x) _SB_MAKEVALUE(x, S_IO_SLEW1) -#define G_IO_SLEW1(x) _SB_GETVALUE(x, S_IO_SLEW1, M_IO_SLEW1) - -#define S_IO_DRV_G 10 -#define M_IO_DRV_G _SB_MAKEMASK(2, S_IO_DRV_G) -#define V_IO_DRV_G(x) _SB_MAKEVALUE(x, S_IO_DRV_G) -#define G_IO_DRV_G(x) _SB_GETVALUE(x, S_IO_DRV_G, M_IO_DRV_G) - -#define S_IO_SLEW2 12 -#define M_IO_SLEW2 _SB_MAKEMASK(2, S_IO_SLEW2) -#define V_IO_SLEW2(x) _SB_MAKEVALUE(x, S_IO_SLEW2) -#define G_IO_SLEW2(x) _SB_GETVALUE(x, S_IO_SLEW2, M_IO_SLEW2) - -#define S_IO_DRV_H 14 -#define M_IO_DRV_H _SB_MAKEMASK(2, S_IO_DRV_H) -#define V_IO_DRV_H(x) _SB_MAKEVALUE(x, S_IO_DRV_H) -#define G_IO_DRV_H(x) _SB_GETVALUE(x, S_IO_DRV_H, M_IO_DRV_H) - -/* - * Generic Bus Output Drive Control Register 2 (Table 14-20) - */ - -#define S_IO_DRV_J 2 -#define M_IO_DRV_J _SB_MAKEMASK(2, S_IO_DRV_J) -#define V_IO_DRV_J(x) _SB_MAKEVALUE(x, S_IO_DRV_J) -#define G_IO_DRV_J(x) _SB_GETVALUE(x, S_IO_DRV_J, M_IO_DRV_J) - -#define S_IO_DRV_K 6 -#define M_IO_DRV_K _SB_MAKEMASK(2, S_IO_DRV_K) -#define V_IO_DRV_K(x) _SB_MAKEVALUE(x, S_IO_DRV_K) -#define G_IO_DRV_K(x) _SB_GETVALUE(x, S_IO_DRV_K, M_IO_DRV_K) - -#define S_IO_DRV_L 10 -#define M_IO_DRV_L _SB_MAKEMASK(2, S_IO_DRV_L) -#define V_IO_DRV_L(x) _SB_MAKEVALUE(x, S_IO_DRV_L) -#define G_IO_DRV_L(x) _SB_GETVALUE(x, S_IO_DRV_L, M_IO_DRV_L) - -#define S_IO_DRV_M 14 -#define M_IO_DRV_M _SB_MAKEMASK(2, S_IO_DRV_M) -#define V_IO_DRV_M(x) _SB_MAKEVALUE(x, S_IO_DRV_M) -#define G_IO_DRV_M(x) _SB_GETVALUE(x, S_IO_DRV_M, M_IO_DRV_M) - -/* - * Generic Bus Output Drive Control Register 3 (Table 14-21) - */ - -#define S_IO_SLEW3 0 -#define M_IO_SLEW3 _SB_MAKEMASK(2, S_IO_SLEW3) -#define V_IO_SLEW3(x) _SB_MAKEVALUE(x, S_IO_SLEW3) -#define G_IO_SLEW3(x) _SB_GETVALUE(x, S_IO_SLEW3, M_IO_SLEW3) - -#define S_IO_DRV_N 2 -#define M_IO_DRV_N _SB_MAKEMASK(2, S_IO_DRV_N) -#define V_IO_DRV_N(x) _SB_MAKEVALUE(x, S_IO_DRV_N) -#define G_IO_DRV_N(x) _SB_GETVALUE(x, S_IO_DRV_N, M_IO_DRV_N) - -#define S_IO_DRV_P 6 -#define M_IO_DRV_P _SB_MAKEMASK(2, S_IO_DRV_P) -#define V_IO_DRV_P(x) _SB_MAKEVALUE(x, S_IO_DRV_P) -#define G_IO_DRV_P(x) _SB_GETVALUE(x, S_IO_DRV_P, M_IO_DRV_P) - -#define S_IO_DRV_Q 10 -#define M_IO_DRV_Q _SB_MAKEMASK(2, S_IO_DRV_Q) -#define V_IO_DRV_Q(x) _SB_MAKEVALUE(x, S_IO_DRV_Q) -#define G_IO_DRV_Q(x) _SB_GETVALUE(x, S_IO_DRV_Q, M_IO_DRV_Q) - -#define S_IO_DRV_R 14 -#define M_IO_DRV_R _SB_MAKEMASK(2, S_IO_DRV_R) -#define V_IO_DRV_R(x) _SB_MAKEVALUE(x, S_IO_DRV_R) -#define G_IO_DRV_R(x) _SB_GETVALUE(x, S_IO_DRV_R, M_IO_DRV_R) - - -/* - * PCMCIA configuration register (Table 12-6) - */ - -#define M_PCMCIA_CFG_ATTRMEM _SB_MAKEMASK1(0) -#define M_PCMCIA_CFG_3VEN _SB_MAKEMASK1(1) -#define M_PCMCIA_CFG_5VEN _SB_MAKEMASK1(2) -#define M_PCMCIA_CFG_VPPEN _SB_MAKEMASK1(3) -#define M_PCMCIA_CFG_RESET _SB_MAKEMASK1(4) -#define M_PCMCIA_CFG_APWRONEN _SB_MAKEMASK1(5) -#define M_PCMCIA_CFG_CDMASK _SB_MAKEMASK1(6) -#define M_PCMCIA_CFG_WPMASK _SB_MAKEMASK1(7) -#define M_PCMCIA_CFG_RDYMASK _SB_MAKEMASK1(8) -#define M_PCMCIA_CFG_PWRCTL _SB_MAKEMASK1(9) - -#if SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_PCMCIA_MODE 16 -#define M_PCMCIA_MODE _SB_MAKEMASK(3, S_PCMCIA_MODE) -#define V_PCMCIA_MODE(x) _SB_MAKEVALUE(x, S_PCMCIA_MODE) -#define G_PCMCIA_MODE(x) _SB_GETVALUE(x, S_PCMCIA_MODE, M_PCMCIA_MODE) - -#define K_PCMCIA_MODE_PCMA_NOB 0 /* standard PCMCIA "A", no "B" */ -#define K_PCMCIA_MODE_IDEA_NOB 1 /* IDE "A", no "B" */ -#define K_PCMCIA_MODE_PCMIOA_NOB 2 /* PCMCIA with I/O "A", no "B" */ -#define K_PCMCIA_MODE_PCMA_PCMB 4 /* standard PCMCIA "A", standard PCMCIA "B" */ -#define K_PCMCIA_MODE_IDEA_PCMB 5 /* IDE "A", standard PCMCIA "B" */ -#define K_PCMCIA_MODE_PCMA_IDEB 6 /* standard PCMCIA "A", IDE "B" */ -#define K_PCMCIA_MODE_IDEA_IDEB 7 /* IDE "A", IDE "B" */ -#endif - - -/* - * PCMCIA status register (Table 12-7) - */ - -#define M_PCMCIA_STATUS_CD1 _SB_MAKEMASK1(0) -#define M_PCMCIA_STATUS_CD2 _SB_MAKEMASK1(1) -#define M_PCMCIA_STATUS_VS1 _SB_MAKEMASK1(2) -#define M_PCMCIA_STATUS_VS2 _SB_MAKEMASK1(3) -#define M_PCMCIA_STATUS_WP _SB_MAKEMASK1(4) -#define M_PCMCIA_STATUS_RDY _SB_MAKEMASK1(5) -#define M_PCMCIA_STATUS_3VEN _SB_MAKEMASK1(6) -#define M_PCMCIA_STATUS_5VEN _SB_MAKEMASK1(7) -#define M_PCMCIA_STATUS_CDCHG _SB_MAKEMASK1(8) -#define M_PCMCIA_STATUS_WPCHG _SB_MAKEMASK1(9) -#define M_PCMCIA_STATUS_RDYCHG _SB_MAKEMASK1(10) - -/* - * GPIO Interrupt Type Register (table 13-3) - */ - -#define K_GPIO_INTR_DISABLE 0 -#define K_GPIO_INTR_EDGE 1 -#define K_GPIO_INTR_LEVEL 2 -#define K_GPIO_INTR_SPLIT 3 - -#define S_GPIO_INTR_TYPEX(n) (((n)/2)*2) -#define M_GPIO_INTR_TYPEX(n) _SB_MAKEMASK(2, S_GPIO_INTR_TYPEX(n)) -#define V_GPIO_INTR_TYPEX(n, x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPEX(n)) -#define G_GPIO_INTR_TYPEX(n, x) _SB_GETVALUE(x, S_GPIO_INTR_TYPEX(n), M_GPIO_INTR_TYPEX(n)) - -#define S_GPIO_INTR_TYPE0 0 -#define M_GPIO_INTR_TYPE0 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE0) -#define V_GPIO_INTR_TYPE0(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE0) -#define G_GPIO_INTR_TYPE0(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE0, M_GPIO_INTR_TYPE0) - -#define S_GPIO_INTR_TYPE2 2 -#define M_GPIO_INTR_TYPE2 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE2) -#define V_GPIO_INTR_TYPE2(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE2) -#define G_GPIO_INTR_TYPE2(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE2, M_GPIO_INTR_TYPE2) - -#define S_GPIO_INTR_TYPE4 4 -#define M_GPIO_INTR_TYPE4 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE4) -#define V_GPIO_INTR_TYPE4(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE4) -#define G_GPIO_INTR_TYPE4(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE4, M_GPIO_INTR_TYPE4) - -#define S_GPIO_INTR_TYPE6 6 -#define M_GPIO_INTR_TYPE6 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE6) -#define V_GPIO_INTR_TYPE6(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE6) -#define G_GPIO_INTR_TYPE6(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE6, M_GPIO_INTR_TYPE6) - -#define S_GPIO_INTR_TYPE8 8 -#define M_GPIO_INTR_TYPE8 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE8) -#define V_GPIO_INTR_TYPE8(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE8) -#define G_GPIO_INTR_TYPE8(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE8, M_GPIO_INTR_TYPE8) - -#define S_GPIO_INTR_TYPE10 10 -#define M_GPIO_INTR_TYPE10 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE10) -#define V_GPIO_INTR_TYPE10(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE10) -#define G_GPIO_INTR_TYPE10(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE10, M_GPIO_INTR_TYPE10) - -#define S_GPIO_INTR_TYPE12 12 -#define M_GPIO_INTR_TYPE12 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE12) -#define V_GPIO_INTR_TYPE12(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE12) -#define G_GPIO_INTR_TYPE12(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE12, M_GPIO_INTR_TYPE12) - -#define S_GPIO_INTR_TYPE14 14 -#define M_GPIO_INTR_TYPE14 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE14) -#define V_GPIO_INTR_TYPE14(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE14) -#define G_GPIO_INTR_TYPE14(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE14, M_GPIO_INTR_TYPE14) - -#if SIBYTE_HDR_FEATURE_CHIP(1480) - -/* - * GPIO Interrupt Additional Type Register - */ - -#define K_GPIO_INTR_BOTHEDGE 0 -#define K_GPIO_INTR_RISEEDGE 1 -#define K_GPIO_INTR_UNPRED1 2 -#define K_GPIO_INTR_UNPRED2 3 - -#define S_GPIO_INTR_ATYPEX(n) (((n)/2)*2) -#define M_GPIO_INTR_ATYPEX(n) _SB_MAKEMASK(2, S_GPIO_INTR_ATYPEX(n)) -#define V_GPIO_INTR_ATYPEX(n, x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPEX(n)) -#define G_GPIO_INTR_ATYPEX(n, x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPEX(n), M_GPIO_INTR_ATYPEX(n)) - -#define S_GPIO_INTR_ATYPE0 0 -#define M_GPIO_INTR_ATYPE0 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE0) -#define V_GPIO_INTR_ATYPE0(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE0) -#define G_GPIO_INTR_ATYPE0(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE0, M_GPIO_INTR_ATYPE0) - -#define S_GPIO_INTR_ATYPE2 2 -#define M_GPIO_INTR_ATYPE2 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE2) -#define V_GPIO_INTR_ATYPE2(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE2) -#define G_GPIO_INTR_ATYPE2(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE2, M_GPIO_INTR_ATYPE2) - -#define S_GPIO_INTR_ATYPE4 4 -#define M_GPIO_INTR_ATYPE4 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE4) -#define V_GPIO_INTR_ATYPE4(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE4) -#define G_GPIO_INTR_ATYPE4(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE4, M_GPIO_INTR_ATYPE4) - -#define S_GPIO_INTR_ATYPE6 6 -#define M_GPIO_INTR_ATYPE6 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE6) -#define V_GPIO_INTR_ATYPE6(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE6) -#define G_GPIO_INTR_ATYPE6(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE6, M_GPIO_INTR_ATYPE6) - -#define S_GPIO_INTR_ATYPE8 8 -#define M_GPIO_INTR_ATYPE8 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE8) -#define V_GPIO_INTR_ATYPE8(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE8) -#define G_GPIO_INTR_ATYPE8(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE8, M_GPIO_INTR_ATYPE8) - -#define S_GPIO_INTR_ATYPE10 10 -#define M_GPIO_INTR_ATYPE10 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE10) -#define V_GPIO_INTR_ATYPE10(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE10) -#define G_GPIO_INTR_ATYPE10(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE10, M_GPIO_INTR_ATYPE10) - -#define S_GPIO_INTR_ATYPE12 12 -#define M_GPIO_INTR_ATYPE12 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE12) -#define V_GPIO_INTR_ATYPE12(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE12) -#define G_GPIO_INTR_ATYPE12(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE12, M_GPIO_INTR_ATYPE12) - -#define S_GPIO_INTR_ATYPE14 14 -#define M_GPIO_INTR_ATYPE14 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE14) -#define V_GPIO_INTR_ATYPE14(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE14) -#define G_GPIO_INTR_ATYPE14(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE14, M_GPIO_INTR_ATYPE14) -#endif - - -#endif diff --git a/include/asm-mips/sibyte/sb1250_int.h b/include/asm-mips/sibyte/sb1250_int.h deleted file mode 100644 index f2850b4bcfd4..000000000000 --- a/include/asm-mips/sibyte/sb1250_int.h +++ /dev/null @@ -1,248 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * Interrupt Mapper definitions File: sb1250_int.h - * - * This module contains constants for manipulating the SB1250's - * interrupt mapper and definitions for the interrupt sources. - * - * SB1250 specification level: User's manual 1/02/02 - * - ********************************************************************* - * - * Copyright 2000, 2001, 2002, 2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _SB1250_INT_H -#define _SB1250_INT_H - -#include "sb1250_defs.h" - -/* ********************************************************************* - * Interrupt Mapper Constants - ********************************************************************* */ - -/* - * Interrupt sources (Table 4-8, UM 0.2) - * - * First, the interrupt numbers. - */ - -#define K_INT_SOURCES 64 - -#define K_INT_WATCHDOG_TIMER_0 0 -#define K_INT_WATCHDOG_TIMER_1 1 -#define K_INT_TIMER_0 2 -#define K_INT_TIMER_1 3 -#define K_INT_TIMER_2 4 -#define K_INT_TIMER_3 5 -#define K_INT_SMB_0 6 -#define K_INT_SMB_1 7 -#define K_INT_UART_0 8 -#define K_INT_UART_1 9 -#define K_INT_SER_0 10 -#define K_INT_SER_1 11 -#define K_INT_PCMCIA 12 -#define K_INT_ADDR_TRAP 13 -#define K_INT_PERF_CNT 14 -#define K_INT_TRACE_FREEZE 15 -#define K_INT_BAD_ECC 16 -#define K_INT_COR_ECC 17 -#define K_INT_IO_BUS 18 -#define K_INT_MAC_0 19 -#define K_INT_MAC_1 20 -#define K_INT_MAC_2 21 -#define K_INT_DM_CH_0 22 -#define K_INT_DM_CH_1 23 -#define K_INT_DM_CH_2 24 -#define K_INT_DM_CH_3 25 -#define K_INT_MBOX_0 26 -#define K_INT_MBOX_1 27 -#define K_INT_MBOX_2 28 -#define K_INT_MBOX_3 29 -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define K_INT_CYCLE_CP0_INT 30 -#define K_INT_CYCLE_CP1_INT 31 -#endif /* 1250 PASS2 || 112x PASS1 */ -#define K_INT_GPIO_0 32 -#define K_INT_GPIO_1 33 -#define K_INT_GPIO_2 34 -#define K_INT_GPIO_3 35 -#define K_INT_GPIO_4 36 -#define K_INT_GPIO_5 37 -#define K_INT_GPIO_6 38 -#define K_INT_GPIO_7 39 -#define K_INT_GPIO_8 40 -#define K_INT_GPIO_9 41 -#define K_INT_GPIO_10 42 -#define K_INT_GPIO_11 43 -#define K_INT_GPIO_12 44 -#define K_INT_GPIO_13 45 -#define K_INT_GPIO_14 46 -#define K_INT_GPIO_15 47 -#define K_INT_LDT_FATAL 48 -#define K_INT_LDT_NONFATAL 49 -#define K_INT_LDT_SMI 50 -#define K_INT_LDT_NMI 51 -#define K_INT_LDT_INIT 52 -#define K_INT_LDT_STARTUP 53 -#define K_INT_LDT_EXT 54 -#define K_INT_PCI_ERROR 55 -#define K_INT_PCI_INTA 56 -#define K_INT_PCI_INTB 57 -#define K_INT_PCI_INTC 58 -#define K_INT_PCI_INTD 59 -#define K_INT_SPARE_2 60 -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define K_INT_MAC_0_CH1 61 -#define K_INT_MAC_1_CH1 62 -#define K_INT_MAC_2_CH1 63 -#endif /* 1250 PASS2 || 112x PASS1 */ - -/* - * Mask values for each interrupt - */ - -#define M_INT_WATCHDOG_TIMER_0 _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_0) -#define M_INT_WATCHDOG_TIMER_1 _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_1) -#define M_INT_TIMER_0 _SB_MAKEMASK1(K_INT_TIMER_0) -#define M_INT_TIMER_1 _SB_MAKEMASK1(K_INT_TIMER_1) -#define M_INT_TIMER_2 _SB_MAKEMASK1(K_INT_TIMER_2) -#define M_INT_TIMER_3 _SB_MAKEMASK1(K_INT_TIMER_3) -#define M_INT_SMB_0 _SB_MAKEMASK1(K_INT_SMB_0) -#define M_INT_SMB_1 _SB_MAKEMASK1(K_INT_SMB_1) -#define M_INT_UART_0 _SB_MAKEMASK1(K_INT_UART_0) -#define M_INT_UART_1 _SB_MAKEMASK1(K_INT_UART_1) -#define M_INT_SER_0 _SB_MAKEMASK1(K_INT_SER_0) -#define M_INT_SER_1 _SB_MAKEMASK1(K_INT_SER_1) -#define M_INT_PCMCIA _SB_MAKEMASK1(K_INT_PCMCIA) -#define M_INT_ADDR_TRAP _SB_MAKEMASK1(K_INT_ADDR_TRAP) -#define M_INT_PERF_CNT _SB_MAKEMASK1(K_INT_PERF_CNT) -#define M_INT_TRACE_FREEZE _SB_MAKEMASK1(K_INT_TRACE_FREEZE) -#define M_INT_BAD_ECC _SB_MAKEMASK1(K_INT_BAD_ECC) -#define M_INT_COR_ECC _SB_MAKEMASK1(K_INT_COR_ECC) -#define M_INT_IO_BUS _SB_MAKEMASK1(K_INT_IO_BUS) -#define M_INT_MAC_0 _SB_MAKEMASK1(K_INT_MAC_0) -#define M_INT_MAC_1 _SB_MAKEMASK1(K_INT_MAC_1) -#define M_INT_MAC_2 _SB_MAKEMASK1(K_INT_MAC_2) -#define M_INT_DM_CH_0 _SB_MAKEMASK1(K_INT_DM_CH_0) -#define M_INT_DM_CH_1 _SB_MAKEMASK1(K_INT_DM_CH_1) -#define M_INT_DM_CH_2 _SB_MAKEMASK1(K_INT_DM_CH_2) -#define M_INT_DM_CH_3 _SB_MAKEMASK1(K_INT_DM_CH_3) -#define M_INT_MBOX_0 _SB_MAKEMASK1(K_INT_MBOX_0) -#define M_INT_MBOX_1 _SB_MAKEMASK1(K_INT_MBOX_1) -#define M_INT_MBOX_2 _SB_MAKEMASK1(K_INT_MBOX_2) -#define M_INT_MBOX_3 _SB_MAKEMASK1(K_INT_MBOX_3) -#define M_INT_MBOX_ALL _SB_MAKEMASK(4, K_INT_MBOX_0) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define M_INT_CYCLE_CP0_INT _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT) -#define M_INT_CYCLE_CP1_INT _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT) -#endif /* 1250 PASS2 || 112x PASS1 */ -#define M_INT_GPIO_0 _SB_MAKEMASK1(K_INT_GPIO_0) -#define M_INT_GPIO_1 _SB_MAKEMASK1(K_INT_GPIO_1) -#define M_INT_GPIO_2 _SB_MAKEMASK1(K_INT_GPIO_2) -#define M_INT_GPIO_3 _SB_MAKEMASK1(K_INT_GPIO_3) -#define M_INT_GPIO_4 _SB_MAKEMASK1(K_INT_GPIO_4) -#define M_INT_GPIO_5 _SB_MAKEMASK1(K_INT_GPIO_5) -#define M_INT_GPIO_6 _SB_MAKEMASK1(K_INT_GPIO_6) -#define M_INT_GPIO_7 _SB_MAKEMASK1(K_INT_GPIO_7) -#define M_INT_GPIO_8 _SB_MAKEMASK1(K_INT_GPIO_8) -#define M_INT_GPIO_9 _SB_MAKEMASK1(K_INT_GPIO_9) -#define M_INT_GPIO_10 _SB_MAKEMASK1(K_INT_GPIO_10) -#define M_INT_GPIO_11 _SB_MAKEMASK1(K_INT_GPIO_11) -#define M_INT_GPIO_12 _SB_MAKEMASK1(K_INT_GPIO_12) -#define M_INT_GPIO_13 _SB_MAKEMASK1(K_INT_GPIO_13) -#define M_INT_GPIO_14 _SB_MAKEMASK1(K_INT_GPIO_14) -#define M_INT_GPIO_15 _SB_MAKEMASK1(K_INT_GPIO_15) -#define M_INT_LDT_FATAL _SB_MAKEMASK1(K_INT_LDT_FATAL) -#define M_INT_LDT_NONFATAL _SB_MAKEMASK1(K_INT_LDT_NONFATAL) -#define M_INT_LDT_SMI _SB_MAKEMASK1(K_INT_LDT_SMI) -#define M_INT_LDT_NMI _SB_MAKEMASK1(K_INT_LDT_NMI) -#define M_INT_LDT_INIT _SB_MAKEMASK1(K_INT_LDT_INIT) -#define M_INT_LDT_STARTUP _SB_MAKEMASK1(K_INT_LDT_STARTUP) -#define M_INT_LDT_EXT _SB_MAKEMASK1(K_INT_LDT_EXT) -#define M_INT_PCI_ERROR _SB_MAKEMASK1(K_INT_PCI_ERROR) -#define M_INT_PCI_INTA _SB_MAKEMASK1(K_INT_PCI_INTA) -#define M_INT_PCI_INTB _SB_MAKEMASK1(K_INT_PCI_INTB) -#define M_INT_PCI_INTC _SB_MAKEMASK1(K_INT_PCI_INTC) -#define M_INT_PCI_INTD _SB_MAKEMASK1(K_INT_PCI_INTD) -#define M_INT_SPARE_2 _SB_MAKEMASK1(K_INT_SPARE_2) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define M_INT_MAC_0_CH1 _SB_MAKEMASK1(K_INT_MAC_0_CH1) -#define M_INT_MAC_1_CH1 _SB_MAKEMASK1(K_INT_MAC_1_CH1) -#define M_INT_MAC_2_CH1 _SB_MAKEMASK1(K_INT_MAC_2_CH1) -#endif /* 1250 PASS2 || 112x PASS1 */ - -/* - * Interrupt mappings - */ - -#define K_INT_MAP_I0 0 /* interrupt pins on processor */ -#define K_INT_MAP_I1 1 -#define K_INT_MAP_I2 2 -#define K_INT_MAP_I3 3 -#define K_INT_MAP_I4 4 -#define K_INT_MAP_I5 5 -#define K_INT_MAP_NMI 6 /* nonmaskable */ -#define K_INT_MAP_DINT 7 /* debug interrupt */ - -/* - * LDT Interrupt Set Register (table 4-5) - */ - -#define S_INT_LDT_INTMSG 0 -#define M_INT_LDT_INTMSG _SB_MAKEMASK(3, S_INT_LDT_INTMSG) -#define V_INT_LDT_INTMSG(x) _SB_MAKEVALUE(x, S_INT_LDT_INTMSG) -#define G_INT_LDT_INTMSG(x) _SB_GETVALUE(x, S_INT_LDT_INTMSG, M_INT_LDT_INTMSG) - -#define K_INT_LDT_INTMSG_FIXED 0 -#define K_INT_LDT_INTMSG_ARBITRATED 1 -#define K_INT_LDT_INTMSG_SMI 2 -#define K_INT_LDT_INTMSG_NMI 3 -#define K_INT_LDT_INTMSG_INIT 4 -#define K_INT_LDT_INTMSG_STARTUP 5 -#define K_INT_LDT_INTMSG_EXTINT 6 -#define K_INT_LDT_INTMSG_RESERVED 7 - -#define M_INT_LDT_EDGETRIGGER 0 -#define M_INT_LDT_LEVELTRIGGER _SB_MAKEMASK1(3) - -#define M_INT_LDT_PHYSICALDEST 0 -#define M_INT_LDT_LOGICALDEST _SB_MAKEMASK1(4) - -#define S_INT_LDT_INTDEST 5 -#define M_INT_LDT_INTDEST _SB_MAKEMASK(10, S_INT_LDT_INTDEST) -#define V_INT_LDT_INTDEST(x) _SB_MAKEVALUE(x, S_INT_LDT_INTDEST) -#define G_INT_LDT_INTDEST(x) _SB_GETVALUE(x, S_INT_LDT_INTDEST, M_INT_LDT_INTDEST) - -#define S_INT_LDT_VECTOR 13 -#define M_INT_LDT_VECTOR _SB_MAKEMASK(8, S_INT_LDT_VECTOR) -#define V_INT_LDT_VECTOR(x) _SB_MAKEVALUE(x, S_INT_LDT_VECTOR) -#define G_INT_LDT_VECTOR(x) _SB_GETVALUE(x, S_INT_LDT_VECTOR, M_INT_LDT_VECTOR) - -/* - * Vector format (Table 4-6) - */ - -#define M_LDTVECT_RAISEINT 0x00 -#define M_LDTVECT_RAISEMBOX 0x40 - - -#endif /* 1250/112x */ diff --git a/include/asm-mips/sibyte/sb1250_l2c.h b/include/asm-mips/sibyte/sb1250_l2c.h deleted file mode 100644 index 6554dcf05cfe..000000000000 --- a/include/asm-mips/sibyte/sb1250_l2c.h +++ /dev/null @@ -1,131 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * L2 Cache constants and macros File: sb1250_l2c.h - * - * This module contains constants useful for manipulating the - * level 2 cache. - * - * SB1250 specification level: User's manual 1/02/02 - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _SB1250_L2C_H -#define _SB1250_L2C_H - -#include "sb1250_defs.h" - -/* - * Level 2 Cache Tag register (Table 5-3) - */ - -#define S_L2C_TAG_MBZ 0 -#define M_L2C_TAG_MBZ _SB_MAKEMASK(5, S_L2C_TAG_MBZ) - -#define S_L2C_TAG_INDEX 5 -#define M_L2C_TAG_INDEX _SB_MAKEMASK(12, S_L2C_TAG_INDEX) -#define V_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x, S_L2C_TAG_INDEX) -#define G_L2C_TAG_INDEX(x) _SB_GETVALUE(x, S_L2C_TAG_INDEX, M_L2C_TAG_INDEX) - -#define S_L2C_TAG_TAG 17 -#define M_L2C_TAG_TAG _SB_MAKEMASK(23, S_L2C_TAG_TAG) -#define V_L2C_TAG_TAG(x) _SB_MAKEVALUE(x, S_L2C_TAG_TAG) -#define G_L2C_TAG_TAG(x) _SB_GETVALUE(x, S_L2C_TAG_TAG, M_L2C_TAG_TAG) - -#define S_L2C_TAG_ECC 40 -#define M_L2C_TAG_ECC _SB_MAKEMASK(6, S_L2C_TAG_ECC) -#define V_L2C_TAG_ECC(x) _SB_MAKEVALUE(x, S_L2C_TAG_ECC) -#define G_L2C_TAG_ECC(x) _SB_GETVALUE(x, S_L2C_TAG_ECC, M_L2C_TAG_ECC) - -#define S_L2C_TAG_WAY 46 -#define M_L2C_TAG_WAY _SB_MAKEMASK(2, S_L2C_TAG_WAY) -#define V_L2C_TAG_WAY(x) _SB_MAKEVALUE(x, S_L2C_TAG_WAY) -#define G_L2C_TAG_WAY(x) _SB_GETVALUE(x, S_L2C_TAG_WAY, M_L2C_TAG_WAY) - -#define M_L2C_TAG_DIRTY _SB_MAKEMASK1(48) -#define M_L2C_TAG_VALID _SB_MAKEMASK1(49) - -/* - * Format of level 2 cache management address (table 5-2) - */ - -#define S_L2C_MGMT_INDEX 5 -#define M_L2C_MGMT_INDEX _SB_MAKEMASK(12, S_L2C_MGMT_INDEX) -#define V_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x, S_L2C_MGMT_INDEX) -#define G_L2C_MGMT_INDEX(x) _SB_GETVALUE(x, S_L2C_MGMT_INDEX, M_L2C_MGMT_INDEX) - -#define S_L2C_MGMT_QUADRANT 15 -#define M_L2C_MGMT_QUADRANT _SB_MAKEMASK(2, S_L2C_MGMT_QUADRANT) -#define V_L2C_MGMT_QUADRANT(x) _SB_MAKEVALUE(x, S_L2C_MGMT_QUADRANT) -#define G_L2C_MGMT_QUADRANT(x) _SB_GETVALUE(x, S_L2C_MGMT_QUADRANT, M_L2C_MGMT_QUADRANT) - -#define S_L2C_MGMT_HALF 16 -#define M_L2C_MGMT_HALF _SB_MAKEMASK(1, S_L2C_MGMT_HALF) - -#define S_L2C_MGMT_WAY 17 -#define M_L2C_MGMT_WAY _SB_MAKEMASK(2, S_L2C_MGMT_WAY) -#define V_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x, S_L2C_MGMT_WAY) -#define G_L2C_MGMT_WAY(x) _SB_GETVALUE(x, S_L2C_MGMT_WAY, M_L2C_MGMT_WAY) - -#define S_L2C_MGMT_ECC_DIAG 21 -#define M_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2, S_L2C_MGMT_ECC_DIAG) -#define V_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x, S_L2C_MGMT_ECC_DIAG) -#define G_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x, S_L2C_MGMT_ECC_DIAG, M_L2C_MGMT_ECC_DIAG) - -#define S_L2C_MGMT_TAG 23 -#define M_L2C_MGMT_TAG _SB_MAKEMASK(4, S_L2C_MGMT_TAG) -#define V_L2C_MGMT_TAG(x) _SB_MAKEVALUE(x, S_L2C_MGMT_TAG) -#define G_L2C_MGMT_TAG(x) _SB_GETVALUE(x, S_L2C_MGMT_TAG, M_L2C_MGMT_TAG) - -#define M_L2C_MGMT_DIRTY _SB_MAKEMASK1(19) -#define M_L2C_MGMT_VALID _SB_MAKEMASK1(20) - -#define A_L2C_MGMT_TAG_BASE 0x00D0000000 - -#define L2C_ENTRIES_PER_WAY 4096 -#define L2C_NUM_WAYS 4 - - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -/* - * L2 Read Misc. register (A_L2_READ_MISC) - */ -#define S_L2C_MISC_NO_WAY 10 -#define M_L2C_MISC_NO_WAY _SB_MAKEMASK(4, S_L2C_MISC_NO_WAY) -#define V_L2C_MISC_NO_WAY(x) _SB_MAKEVALUE(x, S_L2C_MISC_NO_WAY) -#define G_L2C_MISC_NO_WAY(x) _SB_GETVALUE(x, S_L2C_MISC_NO_WAY, M_L2C_MISC_NO_WAY) - -#define M_L2C_MISC_ECC_CLEANUP_DIS _SB_MAKEMASK1(9) -#define M_L2C_MISC_MC_PRIO_LOW _SB_MAKEMASK1(8) -#define M_L2C_MISC_SOFT_DISABLE_T _SB_MAKEMASK1(7) -#define M_L2C_MISC_SOFT_DISABLE_B _SB_MAKEMASK1(6) -#define M_L2C_MISC_SOFT_DISABLE_R _SB_MAKEMASK1(5) -#define M_L2C_MISC_SOFT_DISABLE_L _SB_MAKEMASK1(4) -#define M_L2C_MISC_SCACHE_DISABLE_T _SB_MAKEMASK1(3) -#define M_L2C_MISC_SCACHE_DISABLE_B _SB_MAKEMASK1(2) -#define M_L2C_MISC_SCACHE_DISABLE_R _SB_MAKEMASK1(1) -#define M_L2C_MISC_SCACHE_DISABLE_L _SB_MAKEMASK1(0) -#endif /* 1250 PASS3 || 112x PASS1 */ - - -#endif diff --git a/include/asm-mips/sibyte/sb1250_ldt.h b/include/asm-mips/sibyte/sb1250_ldt.h deleted file mode 100644 index 081e8b1c4ad0..000000000000 --- a/include/asm-mips/sibyte/sb1250_ldt.h +++ /dev/null @@ -1,423 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * LDT constants File: sb1250_ldt.h - * - * This module contains constants and macros to describe - * the LDT interface on the SB1250. - * - * SB1250 specification level: User's manual 1/02/02 - * - ********************************************************************* - * - * Copyright 2000, 2001, 2002, 2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _SB1250_LDT_H -#define _SB1250_LDT_H - -#include "sb1250_defs.h" - -#define K_LDT_VENDOR_SIBYTE 0x166D -#define K_LDT_DEVICE_SB1250 0x0002 - -/* - * LDT Interface Type 1 (bridge) configuration header - */ - -#define R_LDT_TYPE1_DEVICEID 0x0000 -#define R_LDT_TYPE1_CMDSTATUS 0x0004 -#define R_LDT_TYPE1_CLASSREV 0x0008 -#define R_LDT_TYPE1_DEVHDR 0x000C -#define R_LDT_TYPE1_BAR0 0x0010 /* not used */ -#define R_LDT_TYPE1_BAR1 0x0014 /* not used */ - -#define R_LDT_TYPE1_BUSID 0x0018 /* bus ID register */ -#define R_LDT_TYPE1_SECSTATUS 0x001C /* secondary status / I/O base/limit */ -#define R_LDT_TYPE1_MEMLIMIT 0x0020 -#define R_LDT_TYPE1_PREFETCH 0x0024 -#define R_LDT_TYPE1_PREF_BASE 0x0028 -#define R_LDT_TYPE1_PREF_LIMIT 0x002C -#define R_LDT_TYPE1_IOLIMIT 0x0030 -#define R_LDT_TYPE1_CAPPTR 0x0034 -#define R_LDT_TYPE1_ROMADDR 0x0038 -#define R_LDT_TYPE1_BRCTL 0x003C -#define R_LDT_TYPE1_CMD 0x0040 -#define R_LDT_TYPE1_LINKCTRL 0x0044 -#define R_LDT_TYPE1_LINKFREQ 0x0048 -#define R_LDT_TYPE1_RESERVED1 0x004C -#define R_LDT_TYPE1_SRICMD 0x0050 -#define R_LDT_TYPE1_SRITXNUM 0x0054 -#define R_LDT_TYPE1_SRIRXNUM 0x0058 -#define R_LDT_TYPE1_ERRSTATUS 0x0068 -#define R_LDT_TYPE1_SRICTRL 0x006C -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define R_LDT_TYPE1_ADDSTATUS 0x0070 -#endif /* 1250 PASS2 || 112x PASS1 */ -#define R_LDT_TYPE1_TXBUFCNT 0x00C8 -#define R_LDT_TYPE1_EXPCRC 0x00DC -#define R_LDT_TYPE1_RXCRC 0x00F0 - - -/* - * LDT Device ID register - */ - -#define S_LDT_DEVICEID_VENDOR 0 -#define M_LDT_DEVICEID_VENDOR _SB_MAKEMASK_32(16, S_LDT_DEVICEID_VENDOR) -#define V_LDT_DEVICEID_VENDOR(x) _SB_MAKEVALUE_32(x, S_LDT_DEVICEID_VENDOR) -#define G_LDT_DEVICEID_VENDOR(x) _SB_GETVALUE_32(x, S_LDT_DEVICEID_VENDOR, M_LDT_DEVICEID_VENDOR) - -#define S_LDT_DEVICEID_DEVICEID 16 -#define M_LDT_DEVICEID_DEVICEID _SB_MAKEMASK_32(16, S_LDT_DEVICEID_DEVICEID) -#define V_LDT_DEVICEID_DEVICEID(x) _SB_MAKEVALUE_32(x, S_LDT_DEVICEID_DEVICEID) -#define G_LDT_DEVICEID_DEVICEID(x) _SB_GETVALUE_32(x, S_LDT_DEVICEID_DEVICEID, M_LDT_DEVICEID_DEVICEID) - - -/* - * LDT Command Register (Table 8-13) - */ - -#define M_LDT_CMD_IOSPACE_EN _SB_MAKEMASK1_32(0) -#define M_LDT_CMD_MEMSPACE_EN _SB_MAKEMASK1_32(1) -#define M_LDT_CMD_MASTER_EN _SB_MAKEMASK1_32(2) -#define M_LDT_CMD_SPECCYC_EN _SB_MAKEMASK1_32(3) -#define M_LDT_CMD_MEMWRINV_EN _SB_MAKEMASK1_32(4) -#define M_LDT_CMD_VGAPALSNP_EN _SB_MAKEMASK1_32(5) -#define M_LDT_CMD_PARERRRESP _SB_MAKEMASK1_32(6) -#define M_LDT_CMD_WAITCYCCTRL _SB_MAKEMASK1_32(7) -#define M_LDT_CMD_SERR_EN _SB_MAKEMASK1_32(8) -#define M_LDT_CMD_FASTB2B_EN _SB_MAKEMASK1_32(9) - -/* - * LDT class and revision registers - */ - -#define S_LDT_CLASSREV_REV 0 -#define M_LDT_CLASSREV_REV _SB_MAKEMASK_32(8, S_LDT_CLASSREV_REV) -#define V_LDT_CLASSREV_REV(x) _SB_MAKEVALUE_32(x, S_LDT_CLASSREV_REV) -#define G_LDT_CLASSREV_REV(x) _SB_GETVALUE_32(x, S_LDT_CLASSREV_REV, M_LDT_CLASSREV_REV) - -#define S_LDT_CLASSREV_CLASS 8 -#define M_LDT_CLASSREV_CLASS _SB_MAKEMASK_32(24, S_LDT_CLASSREV_CLASS) -#define V_LDT_CLASSREV_CLASS(x) _SB_MAKEVALUE_32(x, S_LDT_CLASSREV_CLASS) -#define G_LDT_CLASSREV_CLASS(x) _SB_GETVALUE_32(x, S_LDT_CLASSREV_CLASS, M_LDT_CLASSREV_CLASS) - -#define K_LDT_REV 0x01 -#define K_LDT_CLASS 0x060000 - -/* - * Device Header (offset 0x0C) - */ - -#define S_LDT_DEVHDR_CLINESZ 0 -#define M_LDT_DEVHDR_CLINESZ _SB_MAKEMASK_32(8, S_LDT_DEVHDR_CLINESZ) -#define V_LDT_DEVHDR_CLINESZ(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_CLINESZ) -#define G_LDT_DEVHDR_CLINESZ(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_CLINESZ, M_LDT_DEVHDR_CLINESZ) - -#define S_LDT_DEVHDR_LATTMR 8 -#define M_LDT_DEVHDR_LATTMR _SB_MAKEMASK_32(8, S_LDT_DEVHDR_LATTMR) -#define V_LDT_DEVHDR_LATTMR(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_LATTMR) -#define G_LDT_DEVHDR_LATTMR(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_LATTMR, M_LDT_DEVHDR_LATTMR) - -#define S_LDT_DEVHDR_HDRTYPE 16 -#define M_LDT_DEVHDR_HDRTYPE _SB_MAKEMASK_32(8, S_LDT_DEVHDR_HDRTYPE) -#define V_LDT_DEVHDR_HDRTYPE(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_HDRTYPE) -#define G_LDT_DEVHDR_HDRTYPE(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_HDRTYPE, M_LDT_DEVHDR_HDRTYPE) - -#define K_LDT_DEVHDR_HDRTYPE_TYPE1 1 - -#define S_LDT_DEVHDR_BIST 24 -#define M_LDT_DEVHDR_BIST _SB_MAKEMASK_32(8, S_LDT_DEVHDR_BIST) -#define V_LDT_DEVHDR_BIST(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_BIST) -#define G_LDT_DEVHDR_BIST(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_BIST, M_LDT_DEVHDR_BIST) - - - -/* - * LDT Status Register (Table 8-14). Note that these constants - * assume you've read the command and status register - * together (32-bit read at offset 0x04) - * - * These bits also apply to the secondary status - * register (Table 8-15), offset 0x1C - */ - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define M_LDT_STATUS_VGAEN _SB_MAKEMASK1_32(3) -#endif /* 1250 PASS2 || 112x PASS1 */ -#define M_LDT_STATUS_CAPLIST _SB_MAKEMASK1_32(20) -#define M_LDT_STATUS_66MHZCAP _SB_MAKEMASK1_32(21) -#define M_LDT_STATUS_RESERVED2 _SB_MAKEMASK1_32(22) -#define M_LDT_STATUS_FASTB2BCAP _SB_MAKEMASK1_32(23) -#define M_LDT_STATUS_MSTRDPARERR _SB_MAKEMASK1_32(24) - -#define S_LDT_STATUS_DEVSELTIMING 25 -#define M_LDT_STATUS_DEVSELTIMING _SB_MAKEMASK_32(2, S_LDT_STATUS_DEVSELTIMING) -#define V_LDT_STATUS_DEVSELTIMING(x) _SB_MAKEVALUE_32(x, S_LDT_STATUS_DEVSELTIMING) -#define G_LDT_STATUS_DEVSELTIMING(x) _SB_GETVALUE_32(x, S_LDT_STATUS_DEVSELTIMING, M_LDT_STATUS_DEVSELTIMING) - -#define M_LDT_STATUS_SIGDTGTABORT _SB_MAKEMASK1_32(27) -#define M_LDT_STATUS_RCVDTGTABORT _SB_MAKEMASK1_32(28) -#define M_LDT_STATUS_RCVDMSTRABORT _SB_MAKEMASK1_32(29) -#define M_LDT_STATUS_SIGDSERR _SB_MAKEMASK1_32(30) -#define M_LDT_STATUS_DETPARERR _SB_MAKEMASK1_32(31) - -/* - * Bridge Control Register (Table 8-16). Note that these - * constants assume you've read the register as a 32-bit - * read (offset 0x3C) - */ - -#define M_LDT_BRCTL_PARERRRESP_EN _SB_MAKEMASK1_32(16) -#define M_LDT_BRCTL_SERR_EN _SB_MAKEMASK1_32(17) -#define M_LDT_BRCTL_ISA_EN _SB_MAKEMASK1_32(18) -#define M_LDT_BRCTL_VGA_EN _SB_MAKEMASK1_32(19) -#define M_LDT_BRCTL_MSTRABORTMODE _SB_MAKEMASK1_32(21) -#define M_LDT_BRCTL_SECBUSRESET _SB_MAKEMASK1_32(22) -#define M_LDT_BRCTL_FASTB2B_EN _SB_MAKEMASK1_32(23) -#define M_LDT_BRCTL_PRIDISCARD _SB_MAKEMASK1_32(24) -#define M_LDT_BRCTL_SECDISCARD _SB_MAKEMASK1_32(25) -#define M_LDT_BRCTL_DISCARDSTAT _SB_MAKEMASK1_32(26) -#define M_LDT_BRCTL_DISCARDSERR_EN _SB_MAKEMASK1_32(27) - -/* - * LDT Command Register (Table 8-17). Note that these constants - * assume you've read the command and status register together - * 32-bit read at offset 0x40 - */ - -#define M_LDT_CMD_WARMRESET _SB_MAKEMASK1_32(16) -#define M_LDT_CMD_DOUBLEENDED _SB_MAKEMASK1_32(17) - -#define S_LDT_CMD_CAPTYPE 29 -#define M_LDT_CMD_CAPTYPE _SB_MAKEMASK_32(3, S_LDT_CMD_CAPTYPE) -#define V_LDT_CMD_CAPTYPE(x) _SB_MAKEVALUE_32(x, S_LDT_CMD_CAPTYPE) -#define G_LDT_CMD_CAPTYPE(x) _SB_GETVALUE_32(x, S_LDT_CMD_CAPTYPE, M_LDT_CMD_CAPTYPE) - -/* - * LDT link control register (Table 8-18), and (Table 8-19) - */ - -#define M_LDT_LINKCTRL_CAPSYNCFLOOD_EN _SB_MAKEMASK1_32(1) -#define M_LDT_LINKCTRL_CRCSTARTTEST _SB_MAKEMASK1_32(2) -#define M_LDT_LINKCTRL_CRCFORCEERR _SB_MAKEMASK1_32(3) -#define M_LDT_LINKCTRL_LINKFAIL _SB_MAKEMASK1_32(4) -#define M_LDT_LINKCTRL_INITDONE _SB_MAKEMASK1_32(5) -#define M_LDT_LINKCTRL_EOC _SB_MAKEMASK1_32(6) -#define M_LDT_LINKCTRL_XMITOFF _SB_MAKEMASK1_32(7) - -#define S_LDT_LINKCTRL_CRCERR 8 -#define M_LDT_LINKCTRL_CRCERR _SB_MAKEMASK_32(4, S_LDT_LINKCTRL_CRCERR) -#define V_LDT_LINKCTRL_CRCERR(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_CRCERR) -#define G_LDT_LINKCTRL_CRCERR(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_CRCERR, M_LDT_LINKCTRL_CRCERR) - -#define S_LDT_LINKCTRL_MAXIN 16 -#define M_LDT_LINKCTRL_MAXIN _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_MAXIN) -#define V_LDT_LINKCTRL_MAXIN(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_MAXIN) -#define G_LDT_LINKCTRL_MAXIN(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_MAXIN, M_LDT_LINKCTRL_MAXIN) - -#define M_LDT_LINKCTRL_DWFCLN _SB_MAKEMASK1_32(19) - -#define S_LDT_LINKCTRL_MAXOUT 20 -#define M_LDT_LINKCTRL_MAXOUT _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_MAXOUT) -#define V_LDT_LINKCTRL_MAXOUT(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_MAXOUT) -#define G_LDT_LINKCTRL_MAXOUT(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_MAXOUT, M_LDT_LINKCTRL_MAXOUT) - -#define M_LDT_LINKCTRL_DWFCOUT _SB_MAKEMASK1_32(23) - -#define S_LDT_LINKCTRL_WIDTHIN 24 -#define M_LDT_LINKCTRL_WIDTHIN _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_WIDTHIN) -#define V_LDT_LINKCTRL_WIDTHIN(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_WIDTHIN) -#define G_LDT_LINKCTRL_WIDTHIN(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_WIDTHIN, M_LDT_LINKCTRL_WIDTHIN) - -#define M_LDT_LINKCTRL_DWFCLIN_EN _SB_MAKEMASK1_32(27) - -#define S_LDT_LINKCTRL_WIDTHOUT 28 -#define M_LDT_LINKCTRL_WIDTHOUT _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_WIDTHOUT) -#define V_LDT_LINKCTRL_WIDTHOUT(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_WIDTHOUT) -#define G_LDT_LINKCTRL_WIDTHOUT(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_WIDTHOUT, M_LDT_LINKCTRL_WIDTHOUT) - -#define M_LDT_LINKCTRL_DWFCOUT_EN _SB_MAKEMASK1_32(31) - -/* - * LDT Link frequency register (Table 8-20) offset 0x48 - */ - -#define S_LDT_LINKFREQ_FREQ 8 -#define M_LDT_LINKFREQ_FREQ _SB_MAKEMASK_32(4, S_LDT_LINKFREQ_FREQ) -#define V_LDT_LINKFREQ_FREQ(x) _SB_MAKEVALUE_32(x, S_LDT_LINKFREQ_FREQ) -#define G_LDT_LINKFREQ_FREQ(x) _SB_GETVALUE_32(x, S_LDT_LINKFREQ_FREQ, M_LDT_LINKFREQ_FREQ) - -#define K_LDT_LINKFREQ_200MHZ 0 -#define K_LDT_LINKFREQ_300MHZ 1 -#define K_LDT_LINKFREQ_400MHZ 2 -#define K_LDT_LINKFREQ_500MHZ 3 -#define K_LDT_LINKFREQ_600MHZ 4 -#define K_LDT_LINKFREQ_800MHZ 5 -#define K_LDT_LINKFREQ_1000MHZ 6 - -/* - * LDT SRI Command Register (Table 8-21). Note that these constants - * assume you've read the command and status register together - * 32-bit read at offset 0x50 - */ - -#define M_LDT_SRICMD_SIPREADY _SB_MAKEMASK1_32(16) -#define M_LDT_SRICMD_SYNCPTRCTL _SB_MAKEMASK1_32(17) -#define M_LDT_SRICMD_REDUCESYNCZERO _SB_MAKEMASK1_32(18) -#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) -#define M_LDT_SRICMD_DISSTARVATIONCNT _SB_MAKEMASK1_32(19) /* PASS1 */ -#endif /* up to 1250 PASS1 */ -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define M_LDT_SRICMD_DISMULTTXVLD _SB_MAKEMASK1_32(19) -#define M_LDT_SRICMD_EXPENDIAN _SB_MAKEMASK1_32(26) -#endif /* 1250 PASS2 || 112x PASS1 */ - - -#define S_LDT_SRICMD_RXMARGIN 20 -#define M_LDT_SRICMD_RXMARGIN _SB_MAKEMASK_32(5, S_LDT_SRICMD_RXMARGIN) -#define V_LDT_SRICMD_RXMARGIN(x) _SB_MAKEVALUE_32(x, S_LDT_SRICMD_RXMARGIN) -#define G_LDT_SRICMD_RXMARGIN(x) _SB_GETVALUE_32(x, S_LDT_SRICMD_RXMARGIN, M_LDT_SRICMD_RXMARGIN) - -#define M_LDT_SRICMD_LDTPLLCOMPAT _SB_MAKEMASK1_32(25) - -#define S_LDT_SRICMD_TXINITIALOFFSET 28 -#define M_LDT_SRICMD_TXINITIALOFFSET _SB_MAKEMASK_32(3, S_LDT_SRICMD_TXINITIALOFFSET) -#define V_LDT_SRICMD_TXINITIALOFFSET(x) _SB_MAKEVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET) -#define G_LDT_SRICMD_TXINITIALOFFSET(x) _SB_GETVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET, M_LDT_SRICMD_TXINITIALOFFSET) - -#define M_LDT_SRICMD_LINKFREQDIRECT _SB_MAKEMASK1_32(31) - -/* - * LDT Error control and status register (Table 8-22) (Table 8-23) - */ - -#define M_LDT_ERRCTL_PROTFATAL_EN _SB_MAKEMASK1_32(0) -#define M_LDT_ERRCTL_PROTNONFATAL_EN _SB_MAKEMASK1_32(1) -#define M_LDT_ERRCTL_PROTSYNCFLOOD_EN _SB_MAKEMASK1_32(2) -#define M_LDT_ERRCTL_OVFFATAL_EN _SB_MAKEMASK1_32(3) -#define M_LDT_ERRCTL_OVFNONFATAL_EN _SB_MAKEMASK1_32(4) -#define M_LDT_ERRCTL_OVFSYNCFLOOD_EN _SB_MAKEMASK1_32(5) -#define M_LDT_ERRCTL_EOCNXAFATAL_EN _SB_MAKEMASK1_32(6) -#define M_LDT_ERRCTL_EOCNXANONFATAL_EN _SB_MAKEMASK1_32(7) -#define M_LDT_ERRCTL_EOCNXASYNCFLOOD_EN _SB_MAKEMASK1_32(8) -#define M_LDT_ERRCTL_CRCFATAL_EN _SB_MAKEMASK1_32(9) -#define M_LDT_ERRCTL_CRCNONFATAL_EN _SB_MAKEMASK1_32(10) -#define M_LDT_ERRCTL_SERRFATAL_EN _SB_MAKEMASK1_32(11) -#define M_LDT_ERRCTL_SRCTAGFATAL_EN _SB_MAKEMASK1_32(12) -#define M_LDT_ERRCTL_SRCTAGNONFATAL_EN _SB_MAKEMASK1_32(13) -#define M_LDT_ERRCTL_SRCTAGSYNCFLOOD_EN _SB_MAKEMASK1_32(14) -#define M_LDT_ERRCTL_MAPNXAFATAL_EN _SB_MAKEMASK1_32(15) -#define M_LDT_ERRCTL_MAPNXANONFATAL_EN _SB_MAKEMASK1_32(16) -#define M_LDT_ERRCTL_MAPNXASYNCFLOOD_EN _SB_MAKEMASK1_32(17) - -#define M_LDT_ERRCTL_PROTOERR _SB_MAKEMASK1_32(24) -#define M_LDT_ERRCTL_OVFERR _SB_MAKEMASK1_32(25) -#define M_LDT_ERRCTL_EOCNXAERR _SB_MAKEMASK1_32(26) -#define M_LDT_ERRCTL_SRCTAGERR _SB_MAKEMASK1_32(27) -#define M_LDT_ERRCTL_MAPNXAERR _SB_MAKEMASK1_32(28) - -/* - * SRI Control register (Table 8-24, 8-25) Offset 0x6C - */ - -#define S_LDT_SRICTRL_NEEDRESP 0 -#define M_LDT_SRICTRL_NEEDRESP _SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDRESP) -#define V_LDT_SRICTRL_NEEDRESP(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDRESP) -#define G_LDT_SRICTRL_NEEDRESP(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDRESP, M_LDT_SRICTRL_NEEDRESP) - -#define S_LDT_SRICTRL_NEEDNPREQ 2 -#define M_LDT_SRICTRL_NEEDNPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDNPREQ) -#define V_LDT_SRICTRL_NEEDNPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDNPREQ) -#define G_LDT_SRICTRL_NEEDNPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDNPREQ, M_LDT_SRICTRL_NEEDNPREQ) - -#define S_LDT_SRICTRL_NEEDPREQ 4 -#define M_LDT_SRICTRL_NEEDPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDPREQ) -#define V_LDT_SRICTRL_NEEDPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDPREQ) -#define G_LDT_SRICTRL_NEEDPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDPREQ, M_LDT_SRICTRL_NEEDPREQ) - -#define S_LDT_SRICTRL_WANTRESP 8 -#define M_LDT_SRICTRL_WANTRESP _SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTRESP) -#define V_LDT_SRICTRL_WANTRESP(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTRESP) -#define G_LDT_SRICTRL_WANTRESP(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTRESP, M_LDT_SRICTRL_WANTRESP) - -#define S_LDT_SRICTRL_WANTNPREQ 10 -#define M_LDT_SRICTRL_WANTNPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTNPREQ) -#define V_LDT_SRICTRL_WANTNPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTNPREQ) -#define G_LDT_SRICTRL_WANTNPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTNPREQ, M_LDT_SRICTRL_WANTNPREQ) - -#define S_LDT_SRICTRL_WANTPREQ 12 -#define M_LDT_SRICTRL_WANTPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTPREQ) -#define V_LDT_SRICTRL_WANTPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTPREQ) -#define G_LDT_SRICTRL_WANTPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTPREQ, M_LDT_SRICTRL_WANTPREQ) - -#define S_LDT_SRICTRL_BUFRELSPACE 16 -#define M_LDT_SRICTRL_BUFRELSPACE _SB_MAKEMASK_32(4, S_LDT_SRICTRL_BUFRELSPACE) -#define V_LDT_SRICTRL_BUFRELSPACE(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_BUFRELSPACE) -#define G_LDT_SRICTRL_BUFRELSPACE(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_BUFRELSPACE, M_LDT_SRICTRL_BUFRELSPACE) - -/* - * LDT SRI Transmit Buffer Count register (Table 8-26) - */ - -#define S_LDT_TXBUFCNT_PCMD 0 -#define M_LDT_TXBUFCNT_PCMD _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_PCMD) -#define V_LDT_TXBUFCNT_PCMD(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_PCMD) -#define G_LDT_TXBUFCNT_PCMD(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_PCMD, M_LDT_TXBUFCNT_PCMD) - -#define S_LDT_TXBUFCNT_PDATA 4 -#define M_LDT_TXBUFCNT_PDATA _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_PDATA) -#define V_LDT_TXBUFCNT_PDATA(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_PDATA) -#define G_LDT_TXBUFCNT_PDATA(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_PDATA, M_LDT_TXBUFCNT_PDATA) - -#define S_LDT_TXBUFCNT_NPCMD 8 -#define M_LDT_TXBUFCNT_NPCMD _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_NPCMD) -#define V_LDT_TXBUFCNT_NPCMD(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_NPCMD) -#define G_LDT_TXBUFCNT_NPCMD(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_NPCMD, M_LDT_TXBUFCNT_NPCMD) - -#define S_LDT_TXBUFCNT_NPDATA 12 -#define M_LDT_TXBUFCNT_NPDATA _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_NPDATA) -#define V_LDT_TXBUFCNT_NPDATA(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_NPDATA) -#define G_LDT_TXBUFCNT_NPDATA(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_NPDATA, M_LDT_TXBUFCNT_NPDATA) - -#define S_LDT_TXBUFCNT_RCMD 16 -#define M_LDT_TXBUFCNT_RCMD _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_RCMD) -#define V_LDT_TXBUFCNT_RCMD(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_RCMD) -#define G_LDT_TXBUFCNT_RCMD(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_RCMD, M_LDT_TXBUFCNT_RCMD) - -#define S_LDT_TXBUFCNT_RDATA 20 -#define M_LDT_TXBUFCNT_RDATA _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_RDATA) -#define V_LDT_TXBUFCNT_RDATA(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_RDATA) -#define G_LDT_TXBUFCNT_RDATA(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_RDATA, M_LDT_TXBUFCNT_RDATA) - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -/* - * Additional Status Register - */ - -#define S_LDT_ADDSTATUS_TGTDONE 0 -#define M_LDT_ADDSTATUS_TGTDONE _SB_MAKEMASK_32(8, S_LDT_ADDSTATUS_TGTDONE) -#define V_LDT_ADDSTATUS_TGTDONE(x) _SB_MAKEVALUE_32(x, S_LDT_ADDSTATUS_TGTDONE) -#define G_LDT_ADDSTATUS_TGTDONE(x) _SB_GETVALUE_32(x, S_LDT_ADDSTATUS_TGTDONE, M_LDT_ADDSTATUS_TGTDONE) -#endif /* 1250 PASS2 || 112x PASS1 */ - -#endif - diff --git a/include/asm-mips/sibyte/sb1250_mac.h b/include/asm-mips/sibyte/sb1250_mac.h deleted file mode 100644 index b6faf08ca81d..000000000000 --- a/include/asm-mips/sibyte/sb1250_mac.h +++ /dev/null @@ -1,656 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * MAC constants and macros File: sb1250_mac.h - * - * This module contains constants and macros for the SB1250's - * ethernet controllers. - * - * SB1250 specification level: User's manual 1/02/02 - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _SB1250_MAC_H -#define _SB1250_MAC_H - -#include "sb1250_defs.h" - -/* ********************************************************************* - * Ethernet MAC Registers - ********************************************************************* */ - -/* - * MAC Configuration Register (Table 9-13) - * Register: MAC_CFG_0 - * Register: MAC_CFG_1 - * Register: MAC_CFG_2 - */ - - -#define M_MAC_RESERVED0 _SB_MAKEMASK1(0) -#define M_MAC_TX_HOLD_SOP_EN _SB_MAKEMASK1(1) -#define M_MAC_RETRY_EN _SB_MAKEMASK1(2) -#define M_MAC_RET_DRPREQ_EN _SB_MAKEMASK1(3) -#define M_MAC_RET_UFL_EN _SB_MAKEMASK1(4) -#define M_MAC_BURST_EN _SB_MAKEMASK1(5) - -#define S_MAC_TX_PAUSE _SB_MAKE64(6) -#define M_MAC_TX_PAUSE_CNT _SB_MAKEMASK(3, S_MAC_TX_PAUSE) -#define V_MAC_TX_PAUSE_CNT(x) _SB_MAKEVALUE(x, S_MAC_TX_PAUSE) - -#define K_MAC_TX_PAUSE_CNT_512 0 -#define K_MAC_TX_PAUSE_CNT_1K 1 -#define K_MAC_TX_PAUSE_CNT_2K 2 -#define K_MAC_TX_PAUSE_CNT_4K 3 -#define K_MAC_TX_PAUSE_CNT_8K 4 -#define K_MAC_TX_PAUSE_CNT_16K 5 -#define K_MAC_TX_PAUSE_CNT_32K 6 -#define K_MAC_TX_PAUSE_CNT_64K 7 - -#define V_MAC_TX_PAUSE_CNT_512 V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_512) -#define V_MAC_TX_PAUSE_CNT_1K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_1K) -#define V_MAC_TX_PAUSE_CNT_2K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_2K) -#define V_MAC_TX_PAUSE_CNT_4K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_4K) -#define V_MAC_TX_PAUSE_CNT_8K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_8K) -#define V_MAC_TX_PAUSE_CNT_16K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_16K) -#define V_MAC_TX_PAUSE_CNT_32K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_32K) -#define V_MAC_TX_PAUSE_CNT_64K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_64K) - -#define M_MAC_RESERVED1 _SB_MAKEMASK(8, 9) - -#define M_MAC_AP_STAT_EN _SB_MAKEMASK1(17) - -#if SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_MAC_TIMESTAMP _SB_MAKEMASK1(18) -#endif -#define M_MAC_DRP_ERRPKT_EN _SB_MAKEMASK1(19) -#define M_MAC_DRP_FCSERRPKT_EN _SB_MAKEMASK1(20) -#define M_MAC_DRP_CODEERRPKT_EN _SB_MAKEMASK1(21) -#define M_MAC_DRP_DRBLERRPKT_EN _SB_MAKEMASK1(22) -#define M_MAC_DRP_RNTPKT_EN _SB_MAKEMASK1(23) -#define M_MAC_DRP_OSZPKT_EN _SB_MAKEMASK1(24) -#define M_MAC_DRP_LENERRPKT_EN _SB_MAKEMASK1(25) - -#define M_MAC_RESERVED3 _SB_MAKEMASK(6, 26) - -#define M_MAC_BYPASS_SEL _SB_MAKEMASK1(32) -#define M_MAC_HDX_EN _SB_MAKEMASK1(33) - -#define S_MAC_SPEED_SEL _SB_MAKE64(34) -#define M_MAC_SPEED_SEL _SB_MAKEMASK(2, S_MAC_SPEED_SEL) -#define V_MAC_SPEED_SEL(x) _SB_MAKEVALUE(x, S_MAC_SPEED_SEL) -#define G_MAC_SPEED_SEL(x) _SB_GETVALUE(x, S_MAC_SPEED_SEL, M_MAC_SPEED_SEL) - -#define K_MAC_SPEED_SEL_10MBPS 0 -#define K_MAC_SPEED_SEL_100MBPS 1 -#define K_MAC_SPEED_SEL_1000MBPS 2 -#define K_MAC_SPEED_SEL_RESERVED 3 - -#define V_MAC_SPEED_SEL_10MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_10MBPS) -#define V_MAC_SPEED_SEL_100MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_100MBPS) -#define V_MAC_SPEED_SEL_1000MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_1000MBPS) -#define V_MAC_SPEED_SEL_RESERVED V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_RESERVED) - -#define M_MAC_TX_CLK_EDGE_SEL _SB_MAKEMASK1(36) -#define M_MAC_LOOPBACK_SEL _SB_MAKEMASK1(37) -#define M_MAC_FAST_SYNC _SB_MAKEMASK1(38) -#define M_MAC_SS_EN _SB_MAKEMASK1(39) - -#define S_MAC_BYPASS_CFG _SB_MAKE64(40) -#define M_MAC_BYPASS_CFG _SB_MAKEMASK(2, S_MAC_BYPASS_CFG) -#define V_MAC_BYPASS_CFG(x) _SB_MAKEVALUE(x, S_MAC_BYPASS_CFG) -#define G_MAC_BYPASS_CFG(x) _SB_GETVALUE(x, S_MAC_BYPASS_CFG, M_MAC_BYPASS_CFG) - -#define K_MAC_BYPASS_GMII 0 -#define K_MAC_BYPASS_ENCODED 1 -#define K_MAC_BYPASS_SOP 2 -#define K_MAC_BYPASS_EOP 3 - -#define M_MAC_BYPASS_16 _SB_MAKEMASK1(42) -#define M_MAC_BYPASS_FCS_CHK _SB_MAKEMASK1(43) - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_MAC_RX_CH_SEL_MSB _SB_MAKEMASK1(44) -#endif /* 1250 PASS2 || 112x PASS1 || 1480*/ - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_MAC_SPLIT_CH_SEL _SB_MAKEMASK1(45) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -#define S_MAC_BYPASS_IFG _SB_MAKE64(46) -#define M_MAC_BYPASS_IFG _SB_MAKEMASK(8, S_MAC_BYPASS_IFG) -#define V_MAC_BYPASS_IFG(x) _SB_MAKEVALUE(x, S_MAC_BYPASS_IFG) -#define G_MAC_BYPASS_IFG(x) _SB_GETVALUE(x, S_MAC_BYPASS_IFG, M_MAC_BYPASS_IFG) - -#define K_MAC_FC_CMD_DISABLED 0 -#define K_MAC_FC_CMD_ENABLED 1 -#define K_MAC_FC_CMD_ENAB_FALSECARR 2 - -#define V_MAC_FC_CMD_DISABLED V_MAC_FC_CMD(K_MAC_FC_CMD_DISABLED) -#define V_MAC_FC_CMD_ENABLED V_MAC_FC_CMD(K_MAC_FC_CMD_ENABLED) -#define V_MAC_FC_CMD_ENAB_FALSECARR V_MAC_FC_CMD(K_MAC_FC_CMD_ENAB_FALSECARR) - -#define M_MAC_FC_SEL _SB_MAKEMASK1(54) - -#define S_MAC_FC_CMD _SB_MAKE64(55) -#define M_MAC_FC_CMD _SB_MAKEMASK(2, S_MAC_FC_CMD) -#define V_MAC_FC_CMD(x) _SB_MAKEVALUE(x, S_MAC_FC_CMD) -#define G_MAC_FC_CMD(x) _SB_GETVALUE(x, S_MAC_FC_CMD, M_MAC_FC_CMD) - -#define S_MAC_RX_CH_SEL _SB_MAKE64(57) -#define M_MAC_RX_CH_SEL _SB_MAKEMASK(7, S_MAC_RX_CH_SEL) -#define V_MAC_RX_CH_SEL(x) _SB_MAKEVALUE(x, S_MAC_RX_CH_SEL) -#define G_MAC_RX_CH_SEL(x) _SB_GETVALUE(x, S_MAC_RX_CH_SEL, M_MAC_RX_CH_SEL) - - -/* - * MAC Enable Registers - * Register: MAC_ENABLE_0 - * Register: MAC_ENABLE_1 - * Register: MAC_ENABLE_2 - */ - -#define M_MAC_RXDMA_EN0 _SB_MAKEMASK1(0) -#define M_MAC_RXDMA_EN1 _SB_MAKEMASK1(1) -#define M_MAC_TXDMA_EN0 _SB_MAKEMASK1(4) -#define M_MAC_TXDMA_EN1 _SB_MAKEMASK1(5) - -#define M_MAC_PORT_RESET _SB_MAKEMASK1(8) - -#if (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x)) -#define M_MAC_RX_ENABLE _SB_MAKEMASK1(10) -#define M_MAC_TX_ENABLE _SB_MAKEMASK1(11) -#define M_MAC_BYP_RX_ENABLE _SB_MAKEMASK1(12) -#define M_MAC_BYP_TX_ENABLE _SB_MAKEMASK1(13) -#endif - -/* - * MAC reset information register (1280/1255) - */ -#if SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_MAC_RX_CH0_PAUSE_ON _SB_MAKEMASK1(8) -#define M_MAC_RX_CH1_PAUSE_ON _SB_MAKEMASK1(16) -#define M_MAC_TX_CH0_PAUSE_ON _SB_MAKEMASK1(24) -#define M_MAC_TX_CH1_PAUSE_ON _SB_MAKEMASK1(32) -#endif - -/* - * MAC DMA Control Register - * Register: MAC_TXD_CTL_0 - * Register: MAC_TXD_CTL_1 - * Register: MAC_TXD_CTL_2 - */ - -#define S_MAC_TXD_WEIGHT0 _SB_MAKE64(0) -#define M_MAC_TXD_WEIGHT0 _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT0) -#define V_MAC_TXD_WEIGHT0(x) _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT0) -#define G_MAC_TXD_WEIGHT0(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT0, M_MAC_TXD_WEIGHT0) - -#define S_MAC_TXD_WEIGHT1 _SB_MAKE64(4) -#define M_MAC_TXD_WEIGHT1 _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT1) -#define V_MAC_TXD_WEIGHT1(x) _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT1) -#define G_MAC_TXD_WEIGHT1(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1) - -/* - * MAC Fifo Threshhold registers (Table 9-14) - * Register: MAC_THRSH_CFG_0 - * Register: MAC_THRSH_CFG_1 - * Register: MAC_THRSH_CFG_2 - */ - -#define S_MAC_TX_WR_THRSH _SB_MAKE64(0) -#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) -/* XXX: Can't enable, as it has the same name as a pass2+ define below. */ -/* #define M_MAC_TX_WR_THRSH _SB_MAKEMASK(6, S_MAC_TX_WR_THRSH) */ -#endif /* up to 1250 PASS1 */ -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_MAC_TX_WR_THRSH _SB_MAKEMASK(7, S_MAC_TX_WR_THRSH) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ -#define V_MAC_TX_WR_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_WR_THRSH) -#define G_MAC_TX_WR_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_WR_THRSH, M_MAC_TX_WR_THRSH) - -#define S_MAC_TX_RD_THRSH _SB_MAKE64(8) -#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) -/* XXX: Can't enable, as it has the same name as a pass2+ define below. */ -/* #define M_MAC_TX_RD_THRSH _SB_MAKEMASK(6, S_MAC_TX_RD_THRSH) */ -#endif /* up to 1250 PASS1 */ -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_MAC_TX_RD_THRSH _SB_MAKEMASK(7, S_MAC_TX_RD_THRSH) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ -#define V_MAC_TX_RD_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_RD_THRSH) -#define G_MAC_TX_RD_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_RD_THRSH, M_MAC_TX_RD_THRSH) - -#define S_MAC_TX_RL_THRSH _SB_MAKE64(16) -#define M_MAC_TX_RL_THRSH _SB_MAKEMASK(4, S_MAC_TX_RL_THRSH) -#define V_MAC_TX_RL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_RL_THRSH) -#define G_MAC_TX_RL_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_RL_THRSH, M_MAC_TX_RL_THRSH) - -#define S_MAC_RX_PL_THRSH _SB_MAKE64(24) -#define M_MAC_RX_PL_THRSH _SB_MAKEMASK(6, S_MAC_RX_PL_THRSH) -#define V_MAC_RX_PL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_PL_THRSH) -#define G_MAC_RX_PL_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_PL_THRSH, M_MAC_RX_PL_THRSH) - -#define S_MAC_RX_RD_THRSH _SB_MAKE64(32) -#define M_MAC_RX_RD_THRSH _SB_MAKEMASK(6, S_MAC_RX_RD_THRSH) -#define V_MAC_RX_RD_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_RD_THRSH) -#define G_MAC_RX_RD_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_RD_THRSH, M_MAC_RX_RD_THRSH) - -#define S_MAC_RX_RL_THRSH _SB_MAKE64(40) -#define M_MAC_RX_RL_THRSH _SB_MAKEMASK(6, S_MAC_RX_RL_THRSH) -#define V_MAC_RX_RL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_RL_THRSH) -#define G_MAC_RX_RL_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_RL_THRSH, M_MAC_RX_RL_THRSH) - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_MAC_ENC_FC_THRSH _SB_MAKE64(56) -#define M_MAC_ENC_FC_THRSH _SB_MAKEMASK(6, S_MAC_ENC_FC_THRSH) -#define V_MAC_ENC_FC_THRSH(x) _SB_MAKEVALUE(x, S_MAC_ENC_FC_THRSH) -#define G_MAC_ENC_FC_THRSH(x) _SB_GETVALUE(x, S_MAC_ENC_FC_THRSH, M_MAC_ENC_FC_THRSH) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - -/* - * MAC Frame Configuration Registers (Table 9-15) - * Register: MAC_FRAME_CFG_0 - * Register: MAC_FRAME_CFG_1 - * Register: MAC_FRAME_CFG_2 - */ - -/* XXXCGD: ??? Unused in pass2? */ -#define S_MAC_IFG_RX _SB_MAKE64(0) -#define M_MAC_IFG_RX _SB_MAKEMASK(6, S_MAC_IFG_RX) -#define V_MAC_IFG_RX(x) _SB_MAKEVALUE(x, S_MAC_IFG_RX) -#define G_MAC_IFG_RX(x) _SB_GETVALUE(x, S_MAC_IFG_RX, M_MAC_IFG_RX) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_MAC_PRE_LEN _SB_MAKE64(0) -#define M_MAC_PRE_LEN _SB_MAKEMASK(6, S_MAC_PRE_LEN) -#define V_MAC_PRE_LEN(x) _SB_MAKEVALUE(x, S_MAC_PRE_LEN) -#define G_MAC_PRE_LEN(x) _SB_GETVALUE(x, S_MAC_PRE_LEN, M_MAC_PRE_LEN) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -#define S_MAC_IFG_TX _SB_MAKE64(6) -#define M_MAC_IFG_TX _SB_MAKEMASK(6, S_MAC_IFG_TX) -#define V_MAC_IFG_TX(x) _SB_MAKEVALUE(x, S_MAC_IFG_TX) -#define G_MAC_IFG_TX(x) _SB_GETVALUE(x, S_MAC_IFG_TX, M_MAC_IFG_TX) - -#define S_MAC_IFG_THRSH _SB_MAKE64(12) -#define M_MAC_IFG_THRSH _SB_MAKEMASK(6, S_MAC_IFG_THRSH) -#define V_MAC_IFG_THRSH(x) _SB_MAKEVALUE(x, S_MAC_IFG_THRSH) -#define G_MAC_IFG_THRSH(x) _SB_GETVALUE(x, S_MAC_IFG_THRSH, M_MAC_IFG_THRSH) - -#define S_MAC_BACKOFF_SEL _SB_MAKE64(18) -#define M_MAC_BACKOFF_SEL _SB_MAKEMASK(4, S_MAC_BACKOFF_SEL) -#define V_MAC_BACKOFF_SEL(x) _SB_MAKEVALUE(x, S_MAC_BACKOFF_SEL) -#define G_MAC_BACKOFF_SEL(x) _SB_GETVALUE(x, S_MAC_BACKOFF_SEL, M_MAC_BACKOFF_SEL) - -#define S_MAC_LFSR_SEED _SB_MAKE64(22) -#define M_MAC_LFSR_SEED _SB_MAKEMASK(8, S_MAC_LFSR_SEED) -#define V_MAC_LFSR_SEED(x) _SB_MAKEVALUE(x, S_MAC_LFSR_SEED) -#define G_MAC_LFSR_SEED(x) _SB_GETVALUE(x, S_MAC_LFSR_SEED, M_MAC_LFSR_SEED) - -#define S_MAC_SLOT_SIZE _SB_MAKE64(30) -#define M_MAC_SLOT_SIZE _SB_MAKEMASK(10, S_MAC_SLOT_SIZE) -#define V_MAC_SLOT_SIZE(x) _SB_MAKEVALUE(x, S_MAC_SLOT_SIZE) -#define G_MAC_SLOT_SIZE(x) _SB_GETVALUE(x, S_MAC_SLOT_SIZE, M_MAC_SLOT_SIZE) - -#define S_MAC_MIN_FRAMESZ _SB_MAKE64(40) -#define M_MAC_MIN_FRAMESZ _SB_MAKEMASK(8, S_MAC_MIN_FRAMESZ) -#define V_MAC_MIN_FRAMESZ(x) _SB_MAKEVALUE(x, S_MAC_MIN_FRAMESZ) -#define G_MAC_MIN_FRAMESZ(x) _SB_GETVALUE(x, S_MAC_MIN_FRAMESZ, M_MAC_MIN_FRAMESZ) - -#define S_MAC_MAX_FRAMESZ _SB_MAKE64(48) -#define M_MAC_MAX_FRAMESZ _SB_MAKEMASK(16, S_MAC_MAX_FRAMESZ) -#define V_MAC_MAX_FRAMESZ(x) _SB_MAKEVALUE(x, S_MAC_MAX_FRAMESZ) -#define G_MAC_MAX_FRAMESZ(x) _SB_GETVALUE(x, S_MAC_MAX_FRAMESZ, M_MAC_MAX_FRAMESZ) - -/* - * These constants are used to configure the fields within the Frame - * Configuration Register. - */ - -#define K_MAC_IFG_RX_10 _SB_MAKE64(0) /* See table 176, not used */ -#define K_MAC_IFG_RX_100 _SB_MAKE64(0) -#define K_MAC_IFG_RX_1000 _SB_MAKE64(0) - -#define K_MAC_IFG_TX_10 _SB_MAKE64(20) -#define K_MAC_IFG_TX_100 _SB_MAKE64(20) -#define K_MAC_IFG_TX_1000 _SB_MAKE64(8) - -#define K_MAC_IFG_THRSH_10 _SB_MAKE64(4) -#define K_MAC_IFG_THRSH_100 _SB_MAKE64(4) -#define K_MAC_IFG_THRSH_1000 _SB_MAKE64(0) - -#define K_MAC_SLOT_SIZE_10 _SB_MAKE64(0) -#define K_MAC_SLOT_SIZE_100 _SB_MAKE64(0) -#define K_MAC_SLOT_SIZE_1000 _SB_MAKE64(0) - -#define V_MAC_IFG_RX_10 V_MAC_IFG_RX(K_MAC_IFG_RX_10) -#define V_MAC_IFG_RX_100 V_MAC_IFG_RX(K_MAC_IFG_RX_100) -#define V_MAC_IFG_RX_1000 V_MAC_IFG_RX(K_MAC_IFG_RX_1000) - -#define V_MAC_IFG_TX_10 V_MAC_IFG_TX(K_MAC_IFG_TX_10) -#define V_MAC_IFG_TX_100 V_MAC_IFG_TX(K_MAC_IFG_TX_100) -#define V_MAC_IFG_TX_1000 V_MAC_IFG_TX(K_MAC_IFG_TX_1000) - -#define V_MAC_IFG_THRSH_10 V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_10) -#define V_MAC_IFG_THRSH_100 V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_100) -#define V_MAC_IFG_THRSH_1000 V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_1000) - -#define V_MAC_SLOT_SIZE_10 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_10) -#define V_MAC_SLOT_SIZE_100 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_100) -#define V_MAC_SLOT_SIZE_1000 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_1000) - -#define K_MAC_MIN_FRAMESZ_FIFO _SB_MAKE64(9) -#define K_MAC_MIN_FRAMESZ_DEFAULT _SB_MAKE64(64) -#define K_MAC_MAX_FRAMESZ_DEFAULT _SB_MAKE64(1518) -#define K_MAC_MAX_FRAMESZ_JUMBO _SB_MAKE64(9216) - -#define V_MAC_MIN_FRAMESZ_FIFO V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_FIFO) -#define V_MAC_MIN_FRAMESZ_DEFAULT V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_DEFAULT) -#define V_MAC_MAX_FRAMESZ_DEFAULT V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_DEFAULT) -#define V_MAC_MAX_FRAMESZ_JUMBO V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_JUMBO) - -/* - * MAC VLAN Tag Registers (Table 9-16) - * Register: MAC_VLANTAG_0 - * Register: MAC_VLANTAG_1 - * Register: MAC_VLANTAG_2 - */ - -#define S_MAC_VLAN_TAG _SB_MAKE64(0) -#define M_MAC_VLAN_TAG _SB_MAKEMASK(32, S_MAC_VLAN_TAG) -#define V_MAC_VLAN_TAG(x) _SB_MAKEVALUE(x, S_MAC_VLAN_TAG) -#define G_MAC_VLAN_TAG(x) _SB_GETVALUE(x, S_MAC_VLAN_TAG, M_MAC_VLAN_TAG) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define S_MAC_TX_PKT_OFFSET _SB_MAKE64(32) -#define M_MAC_TX_PKT_OFFSET _SB_MAKEMASK(8, S_MAC_TX_PKT_OFFSET) -#define V_MAC_TX_PKT_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_TX_PKT_OFFSET) -#define G_MAC_TX_PKT_OFFSET(x) _SB_GETVALUE(x, S_MAC_TX_PKT_OFFSET, M_MAC_TX_PKT_OFFSET) - -#define S_MAC_TX_CRC_OFFSET _SB_MAKE64(40) -#define M_MAC_TX_CRC_OFFSET _SB_MAKEMASK(8, S_MAC_TX_CRC_OFFSET) -#define V_MAC_TX_CRC_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_TX_CRC_OFFSET) -#define G_MAC_TX_CRC_OFFSET(x) _SB_GETVALUE(x, S_MAC_TX_CRC_OFFSET, M_MAC_TX_CRC_OFFSET) - -#define M_MAC_CH_BASE_FC_EN _SB_MAKEMASK1(48) -#endif /* 1250 PASS3 || 112x PASS1 */ - -/* - * MAC Status Registers (Table 9-17) - * Also used for the MAC Interrupt Mask Register (Table 9-18) - * Register: MAC_STATUS_0 - * Register: MAC_STATUS_1 - * Register: MAC_STATUS_2 - * Register: MAC_INT_MASK_0 - * Register: MAC_INT_MASK_1 - * Register: MAC_INT_MASK_2 - */ - -/* - * Use these constants to shift the appropriate channel - * into the CH0 position so the same tests can be used - * on each channel. - */ - -#define S_MAC_RX_CH0 _SB_MAKE64(0) -#define S_MAC_RX_CH1 _SB_MAKE64(8) -#define S_MAC_TX_CH0 _SB_MAKE64(16) -#define S_MAC_TX_CH1 _SB_MAKE64(24) - -#define S_MAC_TXCHANNELS _SB_MAKE64(16) /* this is 1st TX chan */ -#define S_MAC_CHANWIDTH _SB_MAKE64(8) /* bits between channels */ - -/* - * These are the same as RX channel 0. The idea here - * is that you'll use one of the "S_" things above - * and pass just the six bits to a DMA-channel-specific ISR - */ -#define M_MAC_INT_CHANNEL _SB_MAKEMASK(8, 0) -#define M_MAC_INT_EOP_COUNT _SB_MAKEMASK1(0) -#define M_MAC_INT_EOP_TIMER _SB_MAKEMASK1(1) -#define M_MAC_INT_EOP_SEEN _SB_MAKEMASK1(2) -#define M_MAC_INT_HWM _SB_MAKEMASK1(3) -#define M_MAC_INT_LWM _SB_MAKEMASK1(4) -#define M_MAC_INT_DSCR _SB_MAKEMASK1(5) -#define M_MAC_INT_ERR _SB_MAKEMASK1(6) -#define M_MAC_INT_DZERO _SB_MAKEMASK1(7) /* only for TX channels */ -#define M_MAC_INT_DROP _SB_MAKEMASK1(7) /* only for RX channels */ - -/* - * In the following definitions we use ch (0/1) and txrx (TX=1, RX=0, see - * also DMA_TX/DMA_RX in sb_regs.h). - */ -#define S_MAC_STATUS_CH_OFFSET(ch, txrx) _SB_MAKE64(((ch) + 2 * (txrx)) * S_MAC_CHANWIDTH) - -#define M_MAC_STATUS_CHANNEL(ch, txrx) _SB_MAKEVALUE(_SB_MAKEMASK(8, 0), S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_EOP_COUNT(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_COUNT, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_EOP_TIMER(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_TIMER, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_EOP_SEEN(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_SEEN, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_HWM(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_HWM, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_LWM(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_LWM, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_DSCR(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DSCR, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_ERR(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_ERR, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_DZERO(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DZERO, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_DROP(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DROP, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_OTHER_ERR _SB_MAKEVALUE(_SB_MAKEMASK(7, 0), 40) - - -#define M_MAC_RX_UNDRFL _SB_MAKEMASK1(40) -#define M_MAC_RX_OVRFL _SB_MAKEMASK1(41) -#define M_MAC_TX_UNDRFL _SB_MAKEMASK1(42) -#define M_MAC_TX_OVRFL _SB_MAKEMASK1(43) -#define M_MAC_LTCOL_ERR _SB_MAKEMASK1(44) -#define M_MAC_EXCOL_ERR _SB_MAKEMASK1(45) -#define M_MAC_CNTR_OVRFL_ERR _SB_MAKEMASK1(46) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_MAC_SPLIT_EN _SB_MAKEMASK1(47) /* interrupt mask only */ -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - -#define S_MAC_COUNTER_ADDR _SB_MAKE64(47) -#define M_MAC_COUNTER_ADDR _SB_MAKEMASK(5, S_MAC_COUNTER_ADDR) -#define V_MAC_COUNTER_ADDR(x) _SB_MAKEVALUE(x, S_MAC_COUNTER_ADDR) -#define G_MAC_COUNTER_ADDR(x) _SB_GETVALUE(x, S_MAC_COUNTER_ADDR, M_MAC_COUNTER_ADDR) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_MAC_TX_PAUSE_ON _SB_MAKEMASK1(52) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -/* - * MAC Fifo Pointer Registers (Table 9-19) [Debug register] - * Register: MAC_FIFO_PTRS_0 - * Register: MAC_FIFO_PTRS_1 - * Register: MAC_FIFO_PTRS_2 - */ - -#define S_MAC_TX_WRPTR _SB_MAKE64(0) -#define M_MAC_TX_WRPTR _SB_MAKEMASK(6, S_MAC_TX_WRPTR) -#define V_MAC_TX_WRPTR(x) _SB_MAKEVALUE(x, S_MAC_TX_WRPTR) -#define G_MAC_TX_WRPTR(x) _SB_GETVALUE(x, S_MAC_TX_WRPTR, M_MAC_TX_WRPTR) - -#define S_MAC_TX_RDPTR _SB_MAKE64(8) -#define M_MAC_TX_RDPTR _SB_MAKEMASK(6, S_MAC_TX_RDPTR) -#define V_MAC_TX_RDPTR(x) _SB_MAKEVALUE(x, S_MAC_TX_RDPTR) -#define G_MAC_TX_RDPTR(x) _SB_GETVALUE(x, S_MAC_TX_RDPTR, M_MAC_TX_RDPTR) - -#define S_MAC_RX_WRPTR _SB_MAKE64(16) -#define M_MAC_RX_WRPTR _SB_MAKEMASK(6, S_MAC_RX_WRPTR) -#define V_MAC_RX_WRPTR(x) _SB_MAKEVALUE(x, S_MAC_RX_WRPTR) -#define G_MAC_RX_WRPTR(x) _SB_GETVALUE(x, S_MAC_RX_WRPTR, M_MAC_TX_WRPTR) - -#define S_MAC_RX_RDPTR _SB_MAKE64(24) -#define M_MAC_RX_RDPTR _SB_MAKEMASK(6, S_MAC_RX_RDPTR) -#define V_MAC_RX_RDPTR(x) _SB_MAKEVALUE(x, S_MAC_RX_RDPTR) -#define G_MAC_RX_RDPTR(x) _SB_GETVALUE(x, S_MAC_RX_RDPTR, M_MAC_TX_RDPTR) - -/* - * MAC Fifo End Of Packet Count Registers (Table 9-20) [Debug register] - * Register: MAC_EOPCNT_0 - * Register: MAC_EOPCNT_1 - * Register: MAC_EOPCNT_2 - */ - -#define S_MAC_TX_EOP_COUNTER _SB_MAKE64(0) -#define M_MAC_TX_EOP_COUNTER _SB_MAKEMASK(6, S_MAC_TX_EOP_COUNTER) -#define V_MAC_TX_EOP_COUNTER(x) _SB_MAKEVALUE(x, S_MAC_TX_EOP_COUNTER) -#define G_MAC_TX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_TX_EOP_COUNTER, M_MAC_TX_EOP_COUNTER) - -#define S_MAC_RX_EOP_COUNTER _SB_MAKE64(8) -#define M_MAC_RX_EOP_COUNTER _SB_MAKEMASK(6, S_MAC_RX_EOP_COUNTER) -#define V_MAC_RX_EOP_COUNTER(x) _SB_MAKEVALUE(x, S_MAC_RX_EOP_COUNTER) -#define G_MAC_RX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER) - -/* - * MAC Recieve Address Filter Exact Match Registers (Table 9-21) - * Registers: MAC_ADDR0_0 through MAC_ADDR7_0 - * Registers: MAC_ADDR0_1 through MAC_ADDR7_1 - * Registers: MAC_ADDR0_2 through MAC_ADDR7_2 - */ - -/* No bitfields */ - -/* - * MAC Receive Address Filter Mask Registers - * Registers: MAC_ADDRMASK0_0 and MAC_ADDRMASK0_1 - * Registers: MAC_ADDRMASK1_0 and MAC_ADDRMASK1_1 - * Registers: MAC_ADDRMASK2_0 and MAC_ADDRMASK2_1 - */ - -/* No bitfields */ - -/* - * MAC Recieve Address Filter Hash Match Registers (Table 9-22) - * Registers: MAC_HASH0_0 through MAC_HASH7_0 - * Registers: MAC_HASH0_1 through MAC_HASH7_1 - * Registers: MAC_HASH0_2 through MAC_HASH7_2 - */ - -/* No bitfields */ - -/* - * MAC Transmit Source Address Registers (Table 9-23) - * Register: MAC_ETHERNET_ADDR_0 - * Register: MAC_ETHERNET_ADDR_1 - * Register: MAC_ETHERNET_ADDR_2 - */ - -/* No bitfields */ - -/* - * MAC Packet Type Configuration Register - * Register: MAC_TYPE_CFG_0 - * Register: MAC_TYPE_CFG_1 - * Register: MAC_TYPE_CFG_2 - */ - -#define S_TYPECFG_TYPESIZE _SB_MAKE64(16) - -#define S_TYPECFG_TYPE0 _SB_MAKE64(0) -#define M_TYPECFG_TYPE0 _SB_MAKEMASK(16, S_TYPECFG_TYPE0) -#define V_TYPECFG_TYPE0(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE0) -#define G_TYPECFG_TYPE0(x) _SB_GETVALUE(x, S_TYPECFG_TYPE0, M_TYPECFG_TYPE0) - -#define S_TYPECFG_TYPE1 _SB_MAKE64(0) -#define M_TYPECFG_TYPE1 _SB_MAKEMASK(16, S_TYPECFG_TYPE1) -#define V_TYPECFG_TYPE1(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE1) -#define G_TYPECFG_TYPE1(x) _SB_GETVALUE(x, S_TYPECFG_TYPE1, M_TYPECFG_TYPE1) - -#define S_TYPECFG_TYPE2 _SB_MAKE64(0) -#define M_TYPECFG_TYPE2 _SB_MAKEMASK(16, S_TYPECFG_TYPE2) -#define V_TYPECFG_TYPE2(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE2) -#define G_TYPECFG_TYPE2(x) _SB_GETVALUE(x, S_TYPECFG_TYPE2, M_TYPECFG_TYPE2) - -#define S_TYPECFG_TYPE3 _SB_MAKE64(0) -#define M_TYPECFG_TYPE3 _SB_MAKEMASK(16, S_TYPECFG_TYPE3) -#define V_TYPECFG_TYPE3(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE3) -#define G_TYPECFG_TYPE3(x) _SB_GETVALUE(x, S_TYPECFG_TYPE3, M_TYPECFG_TYPE3) - -/* - * MAC Receive Address Filter Control Registers (Table 9-24) - * Register: MAC_ADFILTER_CFG_0 - * Register: MAC_ADFILTER_CFG_1 - * Register: MAC_ADFILTER_CFG_2 - */ - -#define M_MAC_ALLPKT_EN _SB_MAKEMASK1(0) -#define M_MAC_UCAST_EN _SB_MAKEMASK1(1) -#define M_MAC_UCAST_INV _SB_MAKEMASK1(2) -#define M_MAC_MCAST_EN _SB_MAKEMASK1(3) -#define M_MAC_MCAST_INV _SB_MAKEMASK1(4) -#define M_MAC_BCAST_EN _SB_MAKEMASK1(5) -#define M_MAC_DIRECT_INV _SB_MAKEMASK1(6) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_MAC_ALLMCAST_EN _SB_MAKEMASK1(7) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - -#define S_MAC_IPHDR_OFFSET _SB_MAKE64(8) -#define M_MAC_IPHDR_OFFSET _SB_MAKEMASK(8, S_MAC_IPHDR_OFFSET) -#define V_MAC_IPHDR_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_IPHDR_OFFSET) -#define G_MAC_IPHDR_OFFSET(x) _SB_GETVALUE(x, S_MAC_IPHDR_OFFSET, M_MAC_IPHDR_OFFSET) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_MAC_RX_CRC_OFFSET _SB_MAKE64(16) -#define M_MAC_RX_CRC_OFFSET _SB_MAKEMASK(8, S_MAC_RX_CRC_OFFSET) -#define V_MAC_RX_CRC_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_RX_CRC_OFFSET) -#define G_MAC_RX_CRC_OFFSET(x) _SB_GETVALUE(x, S_MAC_RX_CRC_OFFSET, M_MAC_RX_CRC_OFFSET) - -#define S_MAC_RX_PKT_OFFSET _SB_MAKE64(24) -#define M_MAC_RX_PKT_OFFSET _SB_MAKEMASK(8, S_MAC_RX_PKT_OFFSET) -#define V_MAC_RX_PKT_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_RX_PKT_OFFSET) -#define G_MAC_RX_PKT_OFFSET(x) _SB_GETVALUE(x, S_MAC_RX_PKT_OFFSET, M_MAC_RX_PKT_OFFSET) - -#define M_MAC_FWDPAUSE_EN _SB_MAKEMASK1(32) -#define M_MAC_VLAN_DET_EN _SB_MAKEMASK1(33) - -#define S_MAC_RX_CH_MSN_SEL _SB_MAKE64(34) -#define M_MAC_RX_CH_MSN_SEL _SB_MAKEMASK(8, S_MAC_RX_CH_MSN_SEL) -#define V_MAC_RX_CH_MSN_SEL(x) _SB_MAKEVALUE(x, S_MAC_RX_CH_MSN_SEL) -#define G_MAC_RX_CH_MSN_SEL(x) _SB_GETVALUE(x, S_MAC_RX_CH_MSN_SEL, M_MAC_RX_CH_MSN_SEL) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -/* - * MAC Receive Channel Select Registers (Table 9-25) - */ - -/* no bitfields */ - -/* - * MAC MII Management Interface Registers (Table 9-26) - * Register: MAC_MDIO_0 - * Register: MAC_MDIO_1 - * Register: MAC_MDIO_2 - */ - -#define S_MAC_MDC 0 -#define S_MAC_MDIO_DIR 1 -#define S_MAC_MDIO_OUT 2 -#define S_MAC_GENC 3 -#define S_MAC_MDIO_IN 4 - -#define M_MAC_MDC _SB_MAKEMASK1(S_MAC_MDC) -#define M_MAC_MDIO_DIR _SB_MAKEMASK1(S_MAC_MDIO_DIR) -#define M_MAC_MDIO_DIR_INPUT _SB_MAKEMASK1(S_MAC_MDIO_DIR) -#define M_MAC_MDIO_OUT _SB_MAKEMASK1(S_MAC_MDIO_OUT) -#define M_MAC_GENC _SB_MAKEMASK1(S_MAC_GENC) -#define M_MAC_MDIO_IN _SB_MAKEMASK1(S_MAC_MDIO_IN) - -#endif diff --git a/include/asm-mips/sibyte/sb1250_mc.h b/include/asm-mips/sibyte/sb1250_mc.h deleted file mode 100644 index 1eb1b5a88736..000000000000 --- a/include/asm-mips/sibyte/sb1250_mc.h +++ /dev/null @@ -1,550 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * Memory Controller constants File: sb1250_mc.h - * - * This module contains constants and macros useful for - * programming the memory controller. - * - * SB1250 specification level: User's manual 1/02/02 - * - ********************************************************************* - * - * Copyright 2000, 2001, 2002, 2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _SB1250_MC_H -#define _SB1250_MC_H - -#include "sb1250_defs.h" - -/* - * Memory Channel Config Register (table 6-14) - */ - -#define S_MC_RESERVED0 0 -#define M_MC_RESERVED0 _SB_MAKEMASK(8, S_MC_RESERVED0) - -#define S_MC_CHANNEL_SEL 8 -#define M_MC_CHANNEL_SEL _SB_MAKEMASK(8, S_MC_CHANNEL_SEL) -#define V_MC_CHANNEL_SEL(x) _SB_MAKEVALUE(x, S_MC_CHANNEL_SEL) -#define G_MC_CHANNEL_SEL(x) _SB_GETVALUE(x, S_MC_CHANNEL_SEL, M_MC_CHANNEL_SEL) - -#define S_MC_BANK0_MAP 16 -#define M_MC_BANK0_MAP _SB_MAKEMASK(4, S_MC_BANK0_MAP) -#define V_MC_BANK0_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK0_MAP) -#define G_MC_BANK0_MAP(x) _SB_GETVALUE(x, S_MC_BANK0_MAP, M_MC_BANK0_MAP) - -#define K_MC_BANK0_MAP_DEFAULT 0x00 -#define V_MC_BANK0_MAP_DEFAULT V_MC_BANK0_MAP(K_MC_BANK0_MAP_DEFAULT) - -#define S_MC_BANK1_MAP 20 -#define M_MC_BANK1_MAP _SB_MAKEMASK(4, S_MC_BANK1_MAP) -#define V_MC_BANK1_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK1_MAP) -#define G_MC_BANK1_MAP(x) _SB_GETVALUE(x, S_MC_BANK1_MAP, M_MC_BANK1_MAP) - -#define K_MC_BANK1_MAP_DEFAULT 0x08 -#define V_MC_BANK1_MAP_DEFAULT V_MC_BANK1_MAP(K_MC_BANK1_MAP_DEFAULT) - -#define S_MC_BANK2_MAP 24 -#define M_MC_BANK2_MAP _SB_MAKEMASK(4, S_MC_BANK2_MAP) -#define V_MC_BANK2_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK2_MAP) -#define G_MC_BANK2_MAP(x) _SB_GETVALUE(x, S_MC_BANK2_MAP, M_MC_BANK2_MAP) - -#define K_MC_BANK2_MAP_DEFAULT 0x09 -#define V_MC_BANK2_MAP_DEFAULT V_MC_BANK2_MAP(K_MC_BANK2_MAP_DEFAULT) - -#define S_MC_BANK3_MAP 28 -#define M_MC_BANK3_MAP _SB_MAKEMASK(4, S_MC_BANK3_MAP) -#define V_MC_BANK3_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK3_MAP) -#define G_MC_BANK3_MAP(x) _SB_GETVALUE(x, S_MC_BANK3_MAP, M_MC_BANK3_MAP) - -#define K_MC_BANK3_MAP_DEFAULT 0x0C -#define V_MC_BANK3_MAP_DEFAULT V_MC_BANK3_MAP(K_MC_BANK3_MAP_DEFAULT) - -#define M_MC_RESERVED1 _SB_MAKEMASK(8, 32) - -#define S_MC_QUEUE_SIZE 40 -#define M_MC_QUEUE_SIZE _SB_MAKEMASK(4, S_MC_QUEUE_SIZE) -#define V_MC_QUEUE_SIZE(x) _SB_MAKEVALUE(x, S_MC_QUEUE_SIZE) -#define G_MC_QUEUE_SIZE(x) _SB_GETVALUE(x, S_MC_QUEUE_SIZE, M_MC_QUEUE_SIZE) -#define V_MC_QUEUE_SIZE_DEFAULT V_MC_QUEUE_SIZE(0x0A) - -#define S_MC_AGE_LIMIT 44 -#define M_MC_AGE_LIMIT _SB_MAKEMASK(4, S_MC_AGE_LIMIT) -#define V_MC_AGE_LIMIT(x) _SB_MAKEVALUE(x, S_MC_AGE_LIMIT) -#define G_MC_AGE_LIMIT(x) _SB_GETVALUE(x, S_MC_AGE_LIMIT, M_MC_AGE_LIMIT) -#define V_MC_AGE_LIMIT_DEFAULT V_MC_AGE_LIMIT(8) - -#define S_MC_WR_LIMIT 48 -#define M_MC_WR_LIMIT _SB_MAKEMASK(4, S_MC_WR_LIMIT) -#define V_MC_WR_LIMIT(x) _SB_MAKEVALUE(x, S_MC_WR_LIMIT) -#define G_MC_WR_LIMIT(x) _SB_GETVALUE(x, S_MC_WR_LIMIT, M_MC_WR_LIMIT) -#define V_MC_WR_LIMIT_DEFAULT V_MC_WR_LIMIT(5) - -#define M_MC_IOB1HIGHPRIORITY _SB_MAKEMASK1(52) - -#define M_MC_RESERVED2 _SB_MAKEMASK(3, 53) - -#define S_MC_CS_MODE 56 -#define M_MC_CS_MODE _SB_MAKEMASK(4, S_MC_CS_MODE) -#define V_MC_CS_MODE(x) _SB_MAKEVALUE(x, S_MC_CS_MODE) -#define G_MC_CS_MODE(x) _SB_GETVALUE(x, S_MC_CS_MODE, M_MC_CS_MODE) - -#define K_MC_CS_MODE_MSB_CS 0 -#define K_MC_CS_MODE_INTLV_CS 15 -#define K_MC_CS_MODE_MIXED_CS_10 12 -#define K_MC_CS_MODE_MIXED_CS_30 6 -#define K_MC_CS_MODE_MIXED_CS_32 3 - -#define V_MC_CS_MODE_MSB_CS V_MC_CS_MODE(K_MC_CS_MODE_MSB_CS) -#define V_MC_CS_MODE_INTLV_CS V_MC_CS_MODE(K_MC_CS_MODE_INTLV_CS) -#define V_MC_CS_MODE_MIXED_CS_10 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_10) -#define V_MC_CS_MODE_MIXED_CS_30 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_30) -#define V_MC_CS_MODE_MIXED_CS_32 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_32) - -#define M_MC_ECC_DISABLE _SB_MAKEMASK1(60) -#define M_MC_BERR_DISABLE _SB_MAKEMASK1(61) -#define M_MC_FORCE_SEQ _SB_MAKEMASK1(62) -#define M_MC_DEBUG _SB_MAKEMASK1(63) - -#define V_MC_CONFIG_DEFAULT V_MC_WR_LIMIT_DEFAULT | V_MC_AGE_LIMIT_DEFAULT | \ - V_MC_BANK0_MAP_DEFAULT | V_MC_BANK1_MAP_DEFAULT | \ - V_MC_BANK2_MAP_DEFAULT | V_MC_BANK3_MAP_DEFAULT | V_MC_CHANNEL_SEL(0) | \ - M_MC_IOB1HIGHPRIORITY | V_MC_QUEUE_SIZE_DEFAULT - - -/* - * Memory clock config register (Table 6-15) - * - * Note: this field has been updated to be consistent with the errata to 0.2 - */ - -#define S_MC_CLK_RATIO 0 -#define M_MC_CLK_RATIO _SB_MAKEMASK(4, S_MC_CLK_RATIO) -#define V_MC_CLK_RATIO(x) _SB_MAKEVALUE(x, S_MC_CLK_RATIO) -#define G_MC_CLK_RATIO(x) _SB_GETVALUE(x, S_MC_CLK_RATIO, M_MC_CLK_RATIO) - -#define K_MC_CLK_RATIO_2X 4 -#define K_MC_CLK_RATIO_25X 5 -#define K_MC_CLK_RATIO_3X 6 -#define K_MC_CLK_RATIO_35X 7 -#define K_MC_CLK_RATIO_4X 8 -#define K_MC_CLK_RATIO_45X 9 - -#define V_MC_CLK_RATIO_2X V_MC_CLK_RATIO(K_MC_CLK_RATIO_2X) -#define V_MC_CLK_RATIO_25X V_MC_CLK_RATIO(K_MC_CLK_RATIO_25X) -#define V_MC_CLK_RATIO_3X V_MC_CLK_RATIO(K_MC_CLK_RATIO_3X) -#define V_MC_CLK_RATIO_35X V_MC_CLK_RATIO(K_MC_CLK_RATIO_35X) -#define V_MC_CLK_RATIO_4X V_MC_CLK_RATIO(K_MC_CLK_RATIO_4X) -#define V_MC_CLK_RATIO_45X V_MC_CLK_RATIO(K_MC_CLK_RATIO_45X) -#define V_MC_CLK_RATIO_DEFAULT V_MC_CLK_RATIO_25X - -#define S_MC_REF_RATE 8 -#define M_MC_REF_RATE _SB_MAKEMASK(8, S_MC_REF_RATE) -#define V_MC_REF_RATE(x) _SB_MAKEVALUE(x, S_MC_REF_RATE) -#define G_MC_REF_RATE(x) _SB_GETVALUE(x, S_MC_REF_RATE, M_MC_REF_RATE) - -#define K_MC_REF_RATE_100MHz 0x62 -#define K_MC_REF_RATE_133MHz 0x81 -#define K_MC_REF_RATE_200MHz 0xC4 - -#define V_MC_REF_RATE_100MHz V_MC_REF_RATE(K_MC_REF_RATE_100MHz) -#define V_MC_REF_RATE_133MHz V_MC_REF_RATE(K_MC_REF_RATE_133MHz) -#define V_MC_REF_RATE_200MHz V_MC_REF_RATE(K_MC_REF_RATE_200MHz) -#define V_MC_REF_RATE_DEFAULT V_MC_REF_RATE_100MHz - -#define S_MC_CLOCK_DRIVE 16 -#define M_MC_CLOCK_DRIVE _SB_MAKEMASK(4, S_MC_CLOCK_DRIVE) -#define V_MC_CLOCK_DRIVE(x) _SB_MAKEVALUE(x, S_MC_CLOCK_DRIVE) -#define G_MC_CLOCK_DRIVE(x) _SB_GETVALUE(x, S_MC_CLOCK_DRIVE, M_MC_CLOCK_DRIVE) -#define V_MC_CLOCK_DRIVE_DEFAULT V_MC_CLOCK_DRIVE(0xF) - -#define S_MC_DATA_DRIVE 20 -#define M_MC_DATA_DRIVE _SB_MAKEMASK(4, S_MC_DATA_DRIVE) -#define V_MC_DATA_DRIVE(x) _SB_MAKEVALUE(x, S_MC_DATA_DRIVE) -#define G_MC_DATA_DRIVE(x) _SB_GETVALUE(x, S_MC_DATA_DRIVE, M_MC_DATA_DRIVE) -#define V_MC_DATA_DRIVE_DEFAULT V_MC_DATA_DRIVE(0x0) - -#define S_MC_ADDR_DRIVE 24 -#define M_MC_ADDR_DRIVE _SB_MAKEMASK(4, S_MC_ADDR_DRIVE) -#define V_MC_ADDR_DRIVE(x) _SB_MAKEVALUE(x, S_MC_ADDR_DRIVE) -#define G_MC_ADDR_DRIVE(x) _SB_GETVALUE(x, S_MC_ADDR_DRIVE, M_MC_ADDR_DRIVE) -#define V_MC_ADDR_DRIVE_DEFAULT V_MC_ADDR_DRIVE(0x0) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define M_MC_REF_DISABLE _SB_MAKEMASK1(30) -#endif /* 1250 PASS3 || 112x PASS1 */ - -#define M_MC_DLL_BYPASS _SB_MAKEMASK1(31) - -#define S_MC_DQI_SKEW 32 -#define M_MC_DQI_SKEW _SB_MAKEMASK(8, S_MC_DQI_SKEW) -#define V_MC_DQI_SKEW(x) _SB_MAKEVALUE(x, S_MC_DQI_SKEW) -#define G_MC_DQI_SKEW(x) _SB_GETVALUE(x, S_MC_DQI_SKEW, M_MC_DQI_SKEW) -#define V_MC_DQI_SKEW_DEFAULT V_MC_DQI_SKEW(0) - -#define S_MC_DQO_SKEW 40 -#define M_MC_DQO_SKEW _SB_MAKEMASK(8, S_MC_DQO_SKEW) -#define V_MC_DQO_SKEW(x) _SB_MAKEVALUE(x, S_MC_DQO_SKEW) -#define G_MC_DQO_SKEW(x) _SB_GETVALUE(x, S_MC_DQO_SKEW, M_MC_DQO_SKEW) -#define V_MC_DQO_SKEW_DEFAULT V_MC_DQO_SKEW(0) - -#define S_MC_ADDR_SKEW 48 -#define M_MC_ADDR_SKEW _SB_MAKEMASK(8, S_MC_ADDR_SKEW) -#define V_MC_ADDR_SKEW(x) _SB_MAKEVALUE(x, S_MC_ADDR_SKEW) -#define G_MC_ADDR_SKEW(x) _SB_GETVALUE(x, S_MC_ADDR_SKEW, M_MC_ADDR_SKEW) -#define V_MC_ADDR_SKEW_DEFAULT V_MC_ADDR_SKEW(0x0F) - -#define S_MC_DLL_DEFAULT 56 -#define M_MC_DLL_DEFAULT _SB_MAKEMASK(8, S_MC_DLL_DEFAULT) -#define V_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x, S_MC_DLL_DEFAULT) -#define G_MC_DLL_DEFAULT(x) _SB_GETVALUE(x, S_MC_DLL_DEFAULT, M_MC_DLL_DEFAULT) -#define V_MC_DLL_DEFAULT_DEFAULT V_MC_DLL_DEFAULT(0x10) - -#define V_MC_CLKCONFIG_DEFAULT V_MC_DLL_DEFAULT_DEFAULT | \ - V_MC_ADDR_SKEW_DEFAULT | \ - V_MC_DQO_SKEW_DEFAULT | \ - V_MC_DQI_SKEW_DEFAULT | \ - V_MC_ADDR_DRIVE_DEFAULT | \ - V_MC_DATA_DRIVE_DEFAULT | \ - V_MC_CLOCK_DRIVE_DEFAULT | \ - V_MC_REF_RATE_DEFAULT - - - -/* - * DRAM Command Register (Table 6-13) - */ - -#define S_MC_COMMAND 0 -#define M_MC_COMMAND _SB_MAKEMASK(4, S_MC_COMMAND) -#define V_MC_COMMAND(x) _SB_MAKEVALUE(x, S_MC_COMMAND) -#define G_MC_COMMAND(x) _SB_GETVALUE(x, S_MC_COMMAND, M_MC_COMMAND) - -#define K_MC_COMMAND_EMRS 0 -#define K_MC_COMMAND_MRS 1 -#define K_MC_COMMAND_PRE 2 -#define K_MC_COMMAND_AR 3 -#define K_MC_COMMAND_SETRFSH 4 -#define K_MC_COMMAND_CLRRFSH 5 -#define K_MC_COMMAND_SETPWRDN 6 -#define K_MC_COMMAND_CLRPWRDN 7 - -#define V_MC_COMMAND_EMRS V_MC_COMMAND(K_MC_COMMAND_EMRS) -#define V_MC_COMMAND_MRS V_MC_COMMAND(K_MC_COMMAND_MRS) -#define V_MC_COMMAND_PRE V_MC_COMMAND(K_MC_COMMAND_PRE) -#define V_MC_COMMAND_AR V_MC_COMMAND(K_MC_COMMAND_AR) -#define V_MC_COMMAND_SETRFSH V_MC_COMMAND(K_MC_COMMAND_SETRFSH) -#define V_MC_COMMAND_CLRRFSH V_MC_COMMAND(K_MC_COMMAND_CLRRFSH) -#define V_MC_COMMAND_SETPWRDN V_MC_COMMAND(K_MC_COMMAND_SETPWRDN) -#define V_MC_COMMAND_CLRPWRDN V_MC_COMMAND(K_MC_COMMAND_CLRPWRDN) - -#define M_MC_CS0 _SB_MAKEMASK1(4) -#define M_MC_CS1 _SB_MAKEMASK1(5) -#define M_MC_CS2 _SB_MAKEMASK1(6) -#define M_MC_CS3 _SB_MAKEMASK1(7) - -/* - * DRAM Mode Register (Table 6-14) - */ - -#define S_MC_EMODE 0 -#define M_MC_EMODE _SB_MAKEMASK(15, S_MC_EMODE) -#define V_MC_EMODE(x) _SB_MAKEVALUE(x, S_MC_EMODE) -#define G_MC_EMODE(x) _SB_GETVALUE(x, S_MC_EMODE, M_MC_EMODE) -#define V_MC_EMODE_DEFAULT V_MC_EMODE(0) - -#define S_MC_MODE 16 -#define M_MC_MODE _SB_MAKEMASK(15, S_MC_MODE) -#define V_MC_MODE(x) _SB_MAKEVALUE(x, S_MC_MODE) -#define G_MC_MODE(x) _SB_GETVALUE(x, S_MC_MODE, M_MC_MODE) -#define V_MC_MODE_DEFAULT V_MC_MODE(0x22) - -#define S_MC_DRAM_TYPE 32 -#define M_MC_DRAM_TYPE _SB_MAKEMASK(3, S_MC_DRAM_TYPE) -#define V_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x, S_MC_DRAM_TYPE) -#define G_MC_DRAM_TYPE(x) _SB_GETVALUE(x, S_MC_DRAM_TYPE, M_MC_DRAM_TYPE) - -#define K_MC_DRAM_TYPE_JEDEC 0 -#define K_MC_DRAM_TYPE_FCRAM 1 -#define K_MC_DRAM_TYPE_SGRAM 2 - -#define V_MC_DRAM_TYPE_JEDEC V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_JEDEC) -#define V_MC_DRAM_TYPE_FCRAM V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_FCRAM) -#define V_MC_DRAM_TYPE_SGRAM V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_SGRAM) - -#define M_MC_EXTERNALDECODE _SB_MAKEMASK1(35) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define M_MC_PRE_ON_A8 _SB_MAKEMASK1(36) -#define M_MC_RAM_WITH_A13 _SB_MAKEMASK1(37) -#endif /* 1250 PASS3 || 112x PASS1 */ - - - -/* - * SDRAM Timing Register (Table 6-15) - */ - -#define M_MC_w2rIDLE_TWOCYCLES _SB_MAKEMASK1(60) -#define M_MC_r2wIDLE_TWOCYCLES _SB_MAKEMASK1(61) -#define M_MC_r2rIDLE_TWOCYCLES _SB_MAKEMASK1(62) - -#define S_MC_tFIFO 56 -#define M_MC_tFIFO _SB_MAKEMASK(4, S_MC_tFIFO) -#define V_MC_tFIFO(x) _SB_MAKEVALUE(x, S_MC_tFIFO) -#define G_MC_tFIFO(x) _SB_GETVALUE(x, S_MC_tFIFO, M_MC_tFIFO) -#define K_MC_tFIFO_DEFAULT 1 -#define V_MC_tFIFO_DEFAULT V_MC_tFIFO(K_MC_tFIFO_DEFAULT) - -#define S_MC_tRFC 52 -#define M_MC_tRFC _SB_MAKEMASK(4, S_MC_tRFC) -#define V_MC_tRFC(x) _SB_MAKEVALUE(x, S_MC_tRFC) -#define G_MC_tRFC(x) _SB_GETVALUE(x, S_MC_tRFC, M_MC_tRFC) -#define K_MC_tRFC_DEFAULT 12 -#define V_MC_tRFC_DEFAULT V_MC_tRFC(K_MC_tRFC_DEFAULT) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) -#define M_MC_tRFC_PLUS16 _SB_MAKEMASK1(51) /* 1250C3 and later. */ -#endif - -#define S_MC_tCwCr 40 -#define M_MC_tCwCr _SB_MAKEMASK(4, S_MC_tCwCr) -#define V_MC_tCwCr(x) _SB_MAKEVALUE(x, S_MC_tCwCr) -#define G_MC_tCwCr(x) _SB_GETVALUE(x, S_MC_tCwCr, M_MC_tCwCr) -#define K_MC_tCwCr_DEFAULT 4 -#define V_MC_tCwCr_DEFAULT V_MC_tCwCr(K_MC_tCwCr_DEFAULT) - -#define S_MC_tRCr 28 -#define M_MC_tRCr _SB_MAKEMASK(4, S_MC_tRCr) -#define V_MC_tRCr(x) _SB_MAKEVALUE(x, S_MC_tRCr) -#define G_MC_tRCr(x) _SB_GETVALUE(x, S_MC_tRCr, M_MC_tRCr) -#define K_MC_tRCr_DEFAULT 9 -#define V_MC_tRCr_DEFAULT V_MC_tRCr(K_MC_tRCr_DEFAULT) - -#define S_MC_tRCw 24 -#define M_MC_tRCw _SB_MAKEMASK(4, S_MC_tRCw) -#define V_MC_tRCw(x) _SB_MAKEVALUE(x, S_MC_tRCw) -#define G_MC_tRCw(x) _SB_GETVALUE(x, S_MC_tRCw, M_MC_tRCw) -#define K_MC_tRCw_DEFAULT 10 -#define V_MC_tRCw_DEFAULT V_MC_tRCw(K_MC_tRCw_DEFAULT) - -#define S_MC_tRRD 20 -#define M_MC_tRRD _SB_MAKEMASK(4, S_MC_tRRD) -#define V_MC_tRRD(x) _SB_MAKEVALUE(x, S_MC_tRRD) -#define G_MC_tRRD(x) _SB_GETVALUE(x, S_MC_tRRD, M_MC_tRRD) -#define K_MC_tRRD_DEFAULT 2 -#define V_MC_tRRD_DEFAULT V_MC_tRRD(K_MC_tRRD_DEFAULT) - -#define S_MC_tRP 16 -#define M_MC_tRP _SB_MAKEMASK(4, S_MC_tRP) -#define V_MC_tRP(x) _SB_MAKEVALUE(x, S_MC_tRP) -#define G_MC_tRP(x) _SB_GETVALUE(x, S_MC_tRP, M_MC_tRP) -#define K_MC_tRP_DEFAULT 4 -#define V_MC_tRP_DEFAULT V_MC_tRP(K_MC_tRP_DEFAULT) - -#define S_MC_tCwD 8 -#define M_MC_tCwD _SB_MAKEMASK(4, S_MC_tCwD) -#define V_MC_tCwD(x) _SB_MAKEVALUE(x, S_MC_tCwD) -#define G_MC_tCwD(x) _SB_GETVALUE(x, S_MC_tCwD, M_MC_tCwD) -#define K_MC_tCwD_DEFAULT 1 -#define V_MC_tCwD_DEFAULT V_MC_tCwD(K_MC_tCwD_DEFAULT) - -#define M_tCrDh _SB_MAKEMASK1(7) -#define M_MC_tCrDh M_tCrDh - -#define S_MC_tCrD 4 -#define M_MC_tCrD _SB_MAKEMASK(3, S_MC_tCrD) -#define V_MC_tCrD(x) _SB_MAKEVALUE(x, S_MC_tCrD) -#define G_MC_tCrD(x) _SB_GETVALUE(x, S_MC_tCrD, M_MC_tCrD) -#define K_MC_tCrD_DEFAULT 2 -#define V_MC_tCrD_DEFAULT V_MC_tCrD(K_MC_tCrD_DEFAULT) - -#define S_MC_tRCD 0 -#define M_MC_tRCD _SB_MAKEMASK(4, S_MC_tRCD) -#define V_MC_tRCD(x) _SB_MAKEVALUE(x, S_MC_tRCD) -#define G_MC_tRCD(x) _SB_GETVALUE(x, S_MC_tRCD, M_MC_tRCD) -#define K_MC_tRCD_DEFAULT 3 -#define V_MC_tRCD_DEFAULT V_MC_tRCD(K_MC_tRCD_DEFAULT) - -#define V_MC_TIMING_DEFAULT V_MC_tFIFO(K_MC_tFIFO_DEFAULT) | \ - V_MC_tRFC(K_MC_tRFC_DEFAULT) | \ - V_MC_tCwCr(K_MC_tCwCr_DEFAULT) | \ - V_MC_tRCr(K_MC_tRCr_DEFAULT) | \ - V_MC_tRCw(K_MC_tRCw_DEFAULT) | \ - V_MC_tRRD(K_MC_tRRD_DEFAULT) | \ - V_MC_tRP(K_MC_tRP_DEFAULT) | \ - V_MC_tCwD(K_MC_tCwD_DEFAULT) | \ - V_MC_tCrD(K_MC_tCrD_DEFAULT) | \ - V_MC_tRCD(K_MC_tRCD_DEFAULT) | \ - M_MC_r2rIDLE_TWOCYCLES - -/* - * Errata says these are not the default - * M_MC_w2rIDLE_TWOCYCLES | \ - * M_MC_r2wIDLE_TWOCYCLES | \ - */ - - -/* - * Chip Select Start Address Register (Table 6-17) - */ - -#define S_MC_CS0_START 0 -#define M_MC_CS0_START _SB_MAKEMASK(16, S_MC_CS0_START) -#define V_MC_CS0_START(x) _SB_MAKEVALUE(x, S_MC_CS0_START) -#define G_MC_CS0_START(x) _SB_GETVALUE(x, S_MC_CS0_START, M_MC_CS0_START) - -#define S_MC_CS1_START 16 -#define M_MC_CS1_START _SB_MAKEMASK(16, S_MC_CS1_START) -#define V_MC_CS1_START(x) _SB_MAKEVALUE(x, S_MC_CS1_START) -#define G_MC_CS1_START(x) _SB_GETVALUE(x, S_MC_CS1_START, M_MC_CS1_START) - -#define S_MC_CS2_START 32 -#define M_MC_CS2_START _SB_MAKEMASK(16, S_MC_CS2_START) -#define V_MC_CS2_START(x) _SB_MAKEVALUE(x, S_MC_CS2_START) -#define G_MC_CS2_START(x) _SB_GETVALUE(x, S_MC_CS2_START, M_MC_CS2_START) - -#define S_MC_CS3_START 48 -#define M_MC_CS3_START _SB_MAKEMASK(16, S_MC_CS3_START) -#define V_MC_CS3_START(x) _SB_MAKEVALUE(x, S_MC_CS3_START) -#define G_MC_CS3_START(x) _SB_GETVALUE(x, S_MC_CS3_START, M_MC_CS3_START) - -/* - * Chip Select End Address Register (Table 6-18) - */ - -#define S_MC_CS0_END 0 -#define M_MC_CS0_END _SB_MAKEMASK(16, S_MC_CS0_END) -#define V_MC_CS0_END(x) _SB_MAKEVALUE(x, S_MC_CS0_END) -#define G_MC_CS0_END(x) _SB_GETVALUE(x, S_MC_CS0_END, M_MC_CS0_END) - -#define S_MC_CS1_END 16 -#define M_MC_CS1_END _SB_MAKEMASK(16, S_MC_CS1_END) -#define V_MC_CS1_END(x) _SB_MAKEVALUE(x, S_MC_CS1_END) -#define G_MC_CS1_END(x) _SB_GETVALUE(x, S_MC_CS1_END, M_MC_CS1_END) - -#define S_MC_CS2_END 32 -#define M_MC_CS2_END _SB_MAKEMASK(16, S_MC_CS2_END) -#define V_MC_CS2_END(x) _SB_MAKEVALUE(x, S_MC_CS2_END) -#define G_MC_CS2_END(x) _SB_GETVALUE(x, S_MC_CS2_END, M_MC_CS2_END) - -#define S_MC_CS3_END 48 -#define M_MC_CS3_END _SB_MAKEMASK(16, S_MC_CS3_END) -#define V_MC_CS3_END(x) _SB_MAKEVALUE(x, S_MC_CS3_END) -#define G_MC_CS3_END(x) _SB_GETVALUE(x, S_MC_CS3_END, M_MC_CS3_END) - -/* - * Chip Select Interleave Register (Table 6-19) - */ - -#define S_MC_INTLV_RESERVED 0 -#define M_MC_INTLV_RESERVED _SB_MAKEMASK(5, S_MC_INTLV_RESERVED) - -#define S_MC_INTERLEAVE 7 -#define M_MC_INTERLEAVE _SB_MAKEMASK(18, S_MC_INTERLEAVE) -#define V_MC_INTERLEAVE(x) _SB_MAKEVALUE(x, S_MC_INTERLEAVE) - -#define S_MC_INTLV_MBZ 25 -#define M_MC_INTLV_MBZ _SB_MAKEMASK(39, S_MC_INTLV_MBZ) - -/* - * Row Address Bits Register (Table 6-20) - */ - -#define S_MC_RAS_RESERVED 0 -#define M_MC_RAS_RESERVED _SB_MAKEMASK(5, S_MC_RAS_RESERVED) - -#define S_MC_RAS_SELECT 12 -#define M_MC_RAS_SELECT _SB_MAKEMASK(25, S_MC_RAS_SELECT) -#define V_MC_RAS_SELECT(x) _SB_MAKEVALUE(x, S_MC_RAS_SELECT) - -#define S_MC_RAS_MBZ 37 -#define M_MC_RAS_MBZ _SB_MAKEMASK(27, S_MC_RAS_MBZ) - - -/* - * Column Address Bits Register (Table 6-21) - */ - -#define S_MC_CAS_RESERVED 0 -#define M_MC_CAS_RESERVED _SB_MAKEMASK(5, S_MC_CAS_RESERVED) - -#define S_MC_CAS_SELECT 5 -#define M_MC_CAS_SELECT _SB_MAKEMASK(18, S_MC_CAS_SELECT) -#define V_MC_CAS_SELECT(x) _SB_MAKEVALUE(x, S_MC_CAS_SELECT) - -#define S_MC_CAS_MBZ 23 -#define M_MC_CAS_MBZ _SB_MAKEMASK(41, S_MC_CAS_MBZ) - - -/* - * Bank Address Address Bits Register (Table 6-22) - */ - -#define S_MC_BA_RESERVED 0 -#define M_MC_BA_RESERVED _SB_MAKEMASK(5, S_MC_BA_RESERVED) - -#define S_MC_BA_SELECT 5 -#define M_MC_BA_SELECT _SB_MAKEMASK(20, S_MC_BA_SELECT) -#define V_MC_BA_SELECT(x) _SB_MAKEVALUE(x, S_MC_BA_SELECT) - -#define S_MC_BA_MBZ 25 -#define M_MC_BA_MBZ _SB_MAKEMASK(39, S_MC_BA_MBZ) - -/* - * Chip Select Attribute Register (Table 6-23) - */ - -#define K_MC_CS_ATTR_CLOSED 0 -#define K_MC_CS_ATTR_CASCHECK 1 -#define K_MC_CS_ATTR_HINT 2 -#define K_MC_CS_ATTR_OPEN 3 - -#define S_MC_CS0_PAGE 0 -#define M_MC_CS0_PAGE _SB_MAKEMASK(2, S_MC_CS0_PAGE) -#define V_MC_CS0_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS0_PAGE) -#define G_MC_CS0_PAGE(x) _SB_GETVALUE(x, S_MC_CS0_PAGE, M_MC_CS0_PAGE) - -#define S_MC_CS1_PAGE 16 -#define M_MC_CS1_PAGE _SB_MAKEMASK(2, S_MC_CS1_PAGE) -#define V_MC_CS1_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS1_PAGE) -#define G_MC_CS1_PAGE(x) _SB_GETVALUE(x, S_MC_CS1_PAGE, M_MC_CS1_PAGE) - -#define S_MC_CS2_PAGE 32 -#define M_MC_CS2_PAGE _SB_MAKEMASK(2, S_MC_CS2_PAGE) -#define V_MC_CS2_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS2_PAGE) -#define G_MC_CS2_PAGE(x) _SB_GETVALUE(x, S_MC_CS2_PAGE, M_MC_CS2_PAGE) - -#define S_MC_CS3_PAGE 48 -#define M_MC_CS3_PAGE _SB_MAKEMASK(2, S_MC_CS3_PAGE) -#define V_MC_CS3_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS3_PAGE) -#define G_MC_CS3_PAGE(x) _SB_GETVALUE(x, S_MC_CS3_PAGE, M_MC_CS3_PAGE) - -/* - * ECC Test ECC Register (Table 6-25) - */ - -#define S_MC_ECC_INVERT 0 -#define M_MC_ECC_INVERT _SB_MAKEMASK(8, S_MC_ECC_INVERT) - - -#endif diff --git a/include/asm-mips/sibyte/sb1250_regs.h b/include/asm-mips/sibyte/sb1250_regs.h deleted file mode 100644 index 8f53ec817a5e..000000000000 --- a/include/asm-mips/sibyte/sb1250_regs.h +++ /dev/null @@ -1,893 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * Register Definitions File: sb1250_regs.h - * - * This module contains the addresses of the on-chip peripherals - * on the SB1250. - * - * SB1250 specification level: 01/02/2002 - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _SB1250_REGS_H -#define _SB1250_REGS_H - -#include "sb1250_defs.h" - - -/* ********************************************************************* - * Some general notes: - * - * For the most part, when there is more than one peripheral - * of the same type on the SOC, the constants below will be - * offsets from the base of each peripheral. For example, - * the MAC registers are described as offsets from the first - * MAC register, and there will be a MAC_REGISTER() macro - * to calculate the base address of a given MAC. - * - * The information in this file is based on the SB1250 SOC - * manual version 0.2, July 2000. - ********************************************************************* */ - - -/* ********************************************************************* - * Memory Controller Registers - ********************************************************************* */ - -/* - * XXX: can't remove MC base 0 if 112x, since it's used by other macros, - * since there is one reg there (but it could get its addr/offset constant). - */ - -#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ -#define A_MC_BASE_0 0x0010051000 -#define A_MC_BASE_1 0x0010052000 -#define MC_REGISTER_SPACING 0x1000 - -#define A_MC_BASE(ctlid) ((ctlid)*MC_REGISTER_SPACING+A_MC_BASE_0) -#define A_MC_REGISTER(ctlid, reg) (A_MC_BASE(ctlid)+(reg)) - -#define R_MC_CONFIG 0x0000000100 -#define R_MC_DRAMCMD 0x0000000120 -#define R_MC_DRAMMODE 0x0000000140 -#define R_MC_TIMING1 0x0000000160 -#define R_MC_TIMING2 0x0000000180 -#define R_MC_CS_START 0x00000001A0 -#define R_MC_CS_END 0x00000001C0 -#define R_MC_CS_INTERLEAVE 0x00000001E0 -#define S_MC_CS_STARTEND 16 - -#define R_MC_CSX_BASE 0x0000000200 -#define R_MC_CSX_ROW 0x0000000000 /* relative to CSX_BASE, above */ -#define R_MC_CSX_COL 0x0000000020 /* relative to CSX_BASE, above */ -#define R_MC_CSX_BA 0x0000000040 /* relative to CSX_BASE, above */ -#define MC_CSX_SPACING 0x0000000060 /* relative to CSX_BASE, above */ - -#define R_MC_CS0_ROW 0x0000000200 -#define R_MC_CS0_COL 0x0000000220 -#define R_MC_CS0_BA 0x0000000240 -#define R_MC_CS1_ROW 0x0000000260 -#define R_MC_CS1_COL 0x0000000280 -#define R_MC_CS1_BA 0x00000002A0 -#define R_MC_CS2_ROW 0x00000002C0 -#define R_MC_CS2_COL 0x00000002E0 -#define R_MC_CS2_BA 0x0000000300 -#define R_MC_CS3_ROW 0x0000000320 -#define R_MC_CS3_COL 0x0000000340 -#define R_MC_CS3_BA 0x0000000360 -#define R_MC_CS_ATTR 0x0000000380 -#define R_MC_TEST_DATA 0x0000000400 -#define R_MC_TEST_ECC 0x0000000420 -#define R_MC_MCLK_CFG 0x0000000500 - -#endif /* 1250 & 112x */ - -/* ********************************************************************* - * L2 Cache Control Registers - ********************************************************************* */ - -#if SIBYTE_HDR_FEATURE_1250_112x /* This L2C only on 1250/112x */ - -#define A_L2_READ_TAG 0x0010040018 -#define A_L2_ECC_TAG 0x0010040038 -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define A_L2_READ_MISC 0x0010040058 -#endif /* 1250 PASS3 || 112x PASS1 */ -#define A_L2_WAY_DISABLE 0x0010041000 -#define A_L2_MAKEDISABLE(x) (A_L2_WAY_DISABLE | (((~(x))&0x0F) << 8)) -#define A_L2_MGMT_TAG_BASE 0x00D0000000 - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define A_L2_CACHE_DISABLE 0x0010042000 -#define A_L2_MAKECACHEDISABLE(x) (A_L2_CACHE_DISABLE | (((x)&0x0F) << 8)) -#define A_L2_MISC_CONFIG 0x0010043000 -#endif /* 1250 PASS2 || 112x PASS1 */ - -/* Backward-compatibility definitions. */ -/* XXX: discourage people from using these constants. */ -#define A_L2_READ_ADDRESS A_L2_READ_TAG -#define A_L2_EEC_ADDRESS A_L2_ECC_TAG - -#endif - - -/* ********************************************************************* - * PCI Interface Registers - ********************************************************************* */ - -#if SIBYTE_HDR_FEATURE_1250_112x /* This PCI/HT only on 1250/112x */ -#define A_PCI_TYPE00_HEADER 0x00DE000000 -#define A_PCI_TYPE01_HEADER 0x00DE000800 -#endif - - -/* ********************************************************************* - * Ethernet DMA and MACs - ********************************************************************* */ - -#define A_MAC_BASE_0 0x0010064000 -#define A_MAC_BASE_1 0x0010065000 -#if SIBYTE_HDR_FEATURE_CHIP(1250) -#define A_MAC_BASE_2 0x0010066000 -#endif /* 1250 */ - -#define MAC_SPACING 0x1000 -#define MAC_DMA_TXRX_SPACING 0x0400 -#define MAC_DMA_CHANNEL_SPACING 0x0100 -#define DMA_RX 0 -#define DMA_TX 1 -#define MAC_NUM_DMACHAN 2 /* channels per direction */ - -/* XXX: not correct; depends on SOC type. */ -#define MAC_NUM_PORTS 3 - -#define A_MAC_CHANNEL_BASE(macnum) \ - (A_MAC_BASE_0 + \ - MAC_SPACING*(macnum)) - -#define A_MAC_REGISTER(macnum,reg) \ - (A_MAC_BASE_0 + \ - MAC_SPACING*(macnum) + (reg)) - - -#define R_MAC_DMA_CHANNELS 0x800 /* Relative to A_MAC_CHANNEL_BASE */ - -#define A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) \ - ((A_MAC_CHANNEL_BASE(macnum)) + \ - R_MAC_DMA_CHANNELS + \ - (MAC_DMA_TXRX_SPACING*(txrx)) + \ - (MAC_DMA_CHANNEL_SPACING*(chan))) - -#define R_MAC_DMA_CHANNEL_BASE(txrx, chan) \ - (R_MAC_DMA_CHANNELS + \ - (MAC_DMA_TXRX_SPACING*(txrx)) + \ - (MAC_DMA_CHANNEL_SPACING*(chan))) - -#define A_MAC_DMA_REGISTER(macnum, txrx, chan, reg) \ - (A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) + \ - (reg)) - -#define R_MAC_DMA_REGISTER(txrx, chan, reg) \ - (R_MAC_DMA_CHANNEL_BASE(txrx, chan) + \ - (reg)) - -/* - * DMA channel registers, relative to A_MAC_DMA_CHANNEL_BASE - */ - -#define R_MAC_DMA_CONFIG0 0x00000000 -#define R_MAC_DMA_CONFIG1 0x00000008 -#define R_MAC_DMA_DSCR_BASE 0x00000010 -#define R_MAC_DMA_DSCR_CNT 0x00000018 -#define R_MAC_DMA_CUR_DSCRA 0x00000020 -#define R_MAC_DMA_CUR_DSCRB 0x00000028 -#define R_MAC_DMA_CUR_DSCRADDR 0x00000030 -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define R_MAC_DMA_OODPKTLOST_RX 0x00000038 /* rx only */ -#endif /* 1250 PASS3 || 112x PASS1 */ - -/* - * RMON Counters - */ - -#define R_MAC_RMON_TX_BYTES 0x00000000 -#define R_MAC_RMON_COLLISIONS 0x00000008 -#define R_MAC_RMON_LATE_COL 0x00000010 -#define R_MAC_RMON_EX_COL 0x00000018 -#define R_MAC_RMON_FCS_ERROR 0x00000020 -#define R_MAC_RMON_TX_ABORT 0x00000028 -/* Counter #6 (0x30) now reserved */ -#define R_MAC_RMON_TX_BAD 0x00000038 -#define R_MAC_RMON_TX_GOOD 0x00000040 -#define R_MAC_RMON_TX_RUNT 0x00000048 -#define R_MAC_RMON_TX_OVERSIZE 0x00000050 -#define R_MAC_RMON_RX_BYTES 0x00000080 -#define R_MAC_RMON_RX_MCAST 0x00000088 -#define R_MAC_RMON_RX_BCAST 0x00000090 -#define R_MAC_RMON_RX_BAD 0x00000098 -#define R_MAC_RMON_RX_GOOD 0x000000A0 -#define R_MAC_RMON_RX_RUNT 0x000000A8 -#define R_MAC_RMON_RX_OVERSIZE 0x000000B0 -#define R_MAC_RMON_RX_FCS_ERROR 0x000000B8 -#define R_MAC_RMON_RX_LENGTH_ERROR 0x000000C0 -#define R_MAC_RMON_RX_CODE_ERROR 0x000000C8 -#define R_MAC_RMON_RX_ALIGN_ERROR 0x000000D0 - -/* Updated to spec 0.2 */ -#define R_MAC_CFG 0x00000100 -#define R_MAC_THRSH_CFG 0x00000108 -#define R_MAC_VLANTAG 0x00000110 -#define R_MAC_FRAMECFG 0x00000118 -#define R_MAC_EOPCNT 0x00000120 -#define R_MAC_FIFO_PTRS 0x00000128 -#define R_MAC_ADFILTER_CFG 0x00000200 -#define R_MAC_ETHERNET_ADDR 0x00000208 -#define R_MAC_PKT_TYPE 0x00000210 -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define R_MAC_ADMASK0 0x00000218 -#define R_MAC_ADMASK1 0x00000220 -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define R_MAC_HASH_BASE 0x00000240 -#define R_MAC_ADDR_BASE 0x00000280 -#define R_MAC_CHLO0_BASE 0x00000300 -#define R_MAC_CHUP0_BASE 0x00000320 -#define R_MAC_ENABLE 0x00000400 -#define R_MAC_STATUS 0x00000408 -#define R_MAC_INT_MASK 0x00000410 -#define R_MAC_TXD_CTL 0x00000420 -#define R_MAC_MDIO 0x00000428 -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define R_MAC_STATUS1 0x00000430 -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ -#define R_MAC_DEBUG_STATUS 0x00000448 - -#define MAC_HASH_COUNT 8 -#define MAC_ADDR_COUNT 8 -#define MAC_CHMAP_COUNT 4 - - -/* ********************************************************************* - * DUART Registers - ********************************************************************* */ - - -#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ -#define R_DUART_NUM_PORTS 2 - -#define A_DUART 0x0010060000 - -#define DUART_CHANREG_SPACING 0x100 - -#define A_DUART_CHANREG(chan, reg) \ - (A_DUART + DUART_CHANREG_SPACING * ((chan) + 1) + (reg)) -#endif /* 1250 & 112x */ - -#define R_DUART_MODE_REG_1 0x000 -#define R_DUART_MODE_REG_2 0x010 -#define R_DUART_STATUS 0x020 -#define R_DUART_CLK_SEL 0x030 -#define R_DUART_CMD 0x050 -#define R_DUART_RX_HOLD 0x060 -#define R_DUART_TX_HOLD 0x070 - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define R_DUART_FULL_CTL 0x040 -#define R_DUART_OPCR_X 0x080 -#define R_DUART_AUXCTL_X 0x090 -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - - -/* - * The IMR and ISR can't be addressed with A_DUART_CHANREG, - * so use these macros instead. - */ - -#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ -#define DUART_IMRISR_SPACING 0x20 -#define DUART_INCHNG_SPACING 0x10 - -#define A_DUART_CTRLREG(reg) \ - (A_DUART + DUART_CHANREG_SPACING * 3 + (reg)) - -#define R_DUART_IMRREG(chan) \ - (R_DUART_IMR_A + (chan) * DUART_IMRISR_SPACING) -#define R_DUART_ISRREG(chan) \ - (R_DUART_ISR_A + (chan) * DUART_IMRISR_SPACING) -#define R_DUART_INCHREG(chan) \ - (R_DUART_IN_CHNG_A + (chan) * DUART_INCHNG_SPACING) - -#define A_DUART_IMRREG(chan) A_DUART_CTRLREG(R_DUART_IMRREG(chan)) -#define A_DUART_ISRREG(chan) A_DUART_CTRLREG(R_DUART_ISRREG(chan)) -#define A_DUART_INCHREG(chan) A_DUART_CTRLREG(R_DUART_INCHREG(chan)) -#endif /* 1250 & 112x */ - -#define R_DUART_AUX_CTRL 0x010 -#define R_DUART_ISR_A 0x020 -#define R_DUART_IMR_A 0x030 -#define R_DUART_ISR_B 0x040 -#define R_DUART_IMR_B 0x050 -#define R_DUART_OUT_PORT 0x060 -#define R_DUART_OPCR 0x070 -#define R_DUART_IN_PORT 0x080 - -#define R_DUART_SET_OPR 0x0B0 -#define R_DUART_CLEAR_OPR 0x0C0 -#define R_DUART_IN_CHNG_A 0x0D0 -#define R_DUART_IN_CHNG_B 0x0E0 - - -/* - * These constants are the absolute addresses. - */ - -#define A_DUART_MODE_REG_1_A 0x0010060100 -#define A_DUART_MODE_REG_2_A 0x0010060110 -#define A_DUART_STATUS_A 0x0010060120 -#define A_DUART_CLK_SEL_A 0x0010060130 -#define A_DUART_CMD_A 0x0010060150 -#define A_DUART_RX_HOLD_A 0x0010060160 -#define A_DUART_TX_HOLD_A 0x0010060170 - -#define A_DUART_MODE_REG_1_B 0x0010060200 -#define A_DUART_MODE_REG_2_B 0x0010060210 -#define A_DUART_STATUS_B 0x0010060220 -#define A_DUART_CLK_SEL_B 0x0010060230 -#define A_DUART_CMD_B 0x0010060250 -#define A_DUART_RX_HOLD_B 0x0010060260 -#define A_DUART_TX_HOLD_B 0x0010060270 - -#define A_DUART_INPORT_CHNG 0x0010060300 -#define A_DUART_AUX_CTRL 0x0010060310 -#define A_DUART_ISR_A 0x0010060320 -#define A_DUART_IMR_A 0x0010060330 -#define A_DUART_ISR_B 0x0010060340 -#define A_DUART_IMR_B 0x0010060350 -#define A_DUART_OUT_PORT 0x0010060360 -#define A_DUART_OPCR 0x0010060370 -#define A_DUART_IN_PORT 0x0010060380 -#define A_DUART_ISR 0x0010060390 -#define A_DUART_IMR 0x00100603A0 -#define A_DUART_SET_OPR 0x00100603B0 -#define A_DUART_CLEAR_OPR 0x00100603C0 -#define A_DUART_INPORT_CHNG_A 0x00100603D0 -#define A_DUART_INPORT_CHNG_B 0x00100603E0 - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define A_DUART_FULL_CTL_A 0x0010060140 -#define A_DUART_FULL_CTL_B 0x0010060240 - -#define A_DUART_OPCR_A 0x0010060180 -#define A_DUART_OPCR_B 0x0010060280 - -#define A_DUART_INPORT_CHNG_DEBUG 0x00100603F0 -#endif /* 1250 PASS2 || 112x PASS1 */ - - -/* ********************************************************************* - * Synchronous Serial Registers - ********************************************************************* */ - - -#if SIBYTE_HDR_FEATURE_1250_112x /* sync serial only on 1250/112x */ - -#define A_SER_BASE_0 0x0010060400 -#define A_SER_BASE_1 0x0010060800 -#define SER_SPACING 0x400 - -#define SER_DMA_TXRX_SPACING 0x80 - -#define SER_NUM_PORTS 2 - -#define A_SER_CHANNEL_BASE(sernum) \ - (A_SER_BASE_0 + \ - SER_SPACING*(sernum)) - -#define A_SER_REGISTER(sernum,reg) \ - (A_SER_BASE_0 + \ - SER_SPACING*(sernum) + (reg)) - - -#define R_SER_DMA_CHANNELS 0 /* Relative to A_SER_BASE_x */ - -#define A_SER_DMA_CHANNEL_BASE(sernum,txrx) \ - ((A_SER_CHANNEL_BASE(sernum)) + \ - R_SER_DMA_CHANNELS + \ - (SER_DMA_TXRX_SPACING*(txrx))) - -#define A_SER_DMA_REGISTER(sernum, txrx, reg) \ - (A_SER_DMA_CHANNEL_BASE(sernum, txrx) + \ - (reg)) - - -/* - * DMA channel registers, relative to A_SER_DMA_CHANNEL_BASE - */ - -#define R_SER_DMA_CONFIG0 0x00000000 -#define R_SER_DMA_CONFIG1 0x00000008 -#define R_SER_DMA_DSCR_BASE 0x00000010 -#define R_SER_DMA_DSCR_CNT 0x00000018 -#define R_SER_DMA_CUR_DSCRA 0x00000020 -#define R_SER_DMA_CUR_DSCRB 0x00000028 -#define R_SER_DMA_CUR_DSCRADDR 0x00000030 - -#define R_SER_DMA_CONFIG0_RX 0x00000000 -#define R_SER_DMA_CONFIG1_RX 0x00000008 -#define R_SER_DMA_DSCR_BASE_RX 0x00000010 -#define R_SER_DMA_DSCR_COUNT_RX 0x00000018 -#define R_SER_DMA_CUR_DSCR_A_RX 0x00000020 -#define R_SER_DMA_CUR_DSCR_B_RX 0x00000028 -#define R_SER_DMA_CUR_DSCR_ADDR_RX 0x00000030 - -#define R_SER_DMA_CONFIG0_TX 0x00000080 -#define R_SER_DMA_CONFIG1_TX 0x00000088 -#define R_SER_DMA_DSCR_BASE_TX 0x00000090 -#define R_SER_DMA_DSCR_COUNT_TX 0x00000098 -#define R_SER_DMA_CUR_DSCR_A_TX 0x000000A0 -#define R_SER_DMA_CUR_DSCR_B_TX 0x000000A8 -#define R_SER_DMA_CUR_DSCR_ADDR_TX 0x000000B0 - -#define R_SER_MODE 0x00000100 -#define R_SER_MINFRM_SZ 0x00000108 -#define R_SER_MAXFRM_SZ 0x00000110 -#define R_SER_ADDR 0x00000118 -#define R_SER_USR0_ADDR 0x00000120 -#define R_SER_USR1_ADDR 0x00000128 -#define R_SER_USR2_ADDR 0x00000130 -#define R_SER_USR3_ADDR 0x00000138 -#define R_SER_CMD 0x00000140 -#define R_SER_TX_RD_THRSH 0x00000160 -#define R_SER_TX_WR_THRSH 0x00000168 -#define R_SER_RX_RD_THRSH 0x00000170 -#define R_SER_LINE_MODE 0x00000178 -#define R_SER_DMA_ENABLE 0x00000180 -#define R_SER_INT_MASK 0x00000190 -#define R_SER_STATUS 0x00000188 -#define R_SER_STATUS_DEBUG 0x000001A8 -#define R_SER_RX_TABLE_BASE 0x00000200 -#define SER_RX_TABLE_COUNT 16 -#define R_SER_TX_TABLE_BASE 0x00000300 -#define SER_TX_TABLE_COUNT 16 - -/* RMON Counters */ -#define R_SER_RMON_TX_BYTE_LO 0x000001C0 -#define R_SER_RMON_TX_BYTE_HI 0x000001C8 -#define R_SER_RMON_RX_BYTE_LO 0x000001D0 -#define R_SER_RMON_RX_BYTE_HI 0x000001D8 -#define R_SER_RMON_TX_UNDERRUN 0x000001E0 -#define R_SER_RMON_RX_OVERFLOW 0x000001E8 -#define R_SER_RMON_RX_ERRORS 0x000001F0 -#define R_SER_RMON_RX_BADADDR 0x000001F8 - -#endif /* 1250/112x */ - -/* ********************************************************************* - * Generic Bus Registers - ********************************************************************* */ - -#define IO_EXT_CFG_COUNT 8 - -#define A_IO_EXT_BASE 0x0010061000 -#define A_IO_EXT_REG(r) (A_IO_EXT_BASE + (r)) - -#define A_IO_EXT_CFG_BASE 0x0010061000 -#define A_IO_EXT_MULT_SIZE_BASE 0x0010061100 -#define A_IO_EXT_START_ADDR_BASE 0x0010061200 -#define A_IO_EXT_TIME_CFG0_BASE 0x0010061600 -#define A_IO_EXT_TIME_CFG1_BASE 0x0010061700 - -#define IO_EXT_REGISTER_SPACING 8 -#define A_IO_EXT_CS_BASE(cs) (A_IO_EXT_CFG_BASE+IO_EXT_REGISTER_SPACING*(cs)) -#define R_IO_EXT_REG(reg, cs) ((cs)*IO_EXT_REGISTER_SPACING + (reg)) - -#define R_IO_EXT_CFG 0x0000 -#define R_IO_EXT_MULT_SIZE 0x0100 -#define R_IO_EXT_START_ADDR 0x0200 -#define R_IO_EXT_TIME_CFG0 0x0600 -#define R_IO_EXT_TIME_CFG1 0x0700 - - -#define A_IO_INTERRUPT_STATUS 0x0010061A00 -#define A_IO_INTERRUPT_DATA0 0x0010061A10 -#define A_IO_INTERRUPT_DATA1 0x0010061A18 -#define A_IO_INTERRUPT_DATA2 0x0010061A20 -#define A_IO_INTERRUPT_DATA3 0x0010061A28 -#define A_IO_INTERRUPT_ADDR0 0x0010061A30 -#define A_IO_INTERRUPT_ADDR1 0x0010061A40 -#define A_IO_INTERRUPT_PARITY 0x0010061A50 -#define A_IO_PCMCIA_CFG 0x0010061A60 -#define A_IO_PCMCIA_STATUS 0x0010061A70 -#define A_IO_DRIVE_0 0x0010061300 -#define A_IO_DRIVE_1 0x0010061308 -#define A_IO_DRIVE_2 0x0010061310 -#define A_IO_DRIVE_3 0x0010061318 -#define A_IO_DRIVE_BASE A_IO_DRIVE_0 -#define IO_DRIVE_REGISTER_SPACING 8 -#define R_IO_DRIVE(x) ((x)*IO_DRIVE_REGISTER_SPACING) -#define A_IO_DRIVE(x) (A_IO_DRIVE_BASE + R_IO_DRIVE(x)) - -#define R_IO_INTERRUPT_STATUS 0x0A00 -#define R_IO_INTERRUPT_DATA0 0x0A10 -#define R_IO_INTERRUPT_DATA1 0x0A18 -#define R_IO_INTERRUPT_DATA2 0x0A20 -#define R_IO_INTERRUPT_DATA3 0x0A28 -#define R_IO_INTERRUPT_ADDR0 0x0A30 -#define R_IO_INTERRUPT_ADDR1 0x0A40 -#define R_IO_INTERRUPT_PARITY 0x0A50 -#define R_IO_PCMCIA_CFG 0x0A60 -#define R_IO_PCMCIA_STATUS 0x0A70 - -/* ********************************************************************* - * GPIO Registers - ********************************************************************* */ - -#define A_GPIO_CLR_EDGE 0x0010061A80 -#define A_GPIO_INT_TYPE 0x0010061A88 -#define A_GPIO_INPUT_INVERT 0x0010061A90 -#define A_GPIO_GLITCH 0x0010061A98 -#define A_GPIO_READ 0x0010061AA0 -#define A_GPIO_DIRECTION 0x0010061AA8 -#define A_GPIO_PIN_CLR 0x0010061AB0 -#define A_GPIO_PIN_SET 0x0010061AB8 - -#define A_GPIO_BASE 0x0010061A80 - -#define R_GPIO_CLR_EDGE 0x00 -#define R_GPIO_INT_TYPE 0x08 -#define R_GPIO_INPUT_INVERT 0x10 -#define R_GPIO_GLITCH 0x18 -#define R_GPIO_READ 0x20 -#define R_GPIO_DIRECTION 0x28 -#define R_GPIO_PIN_CLR 0x30 -#define R_GPIO_PIN_SET 0x38 - -/* ********************************************************************* - * SMBus Registers - ********************************************************************* */ - -#define A_SMB_XTRA_0 0x0010060000 -#define A_SMB_XTRA_1 0x0010060008 -#define A_SMB_FREQ_0 0x0010060010 -#define A_SMB_FREQ_1 0x0010060018 -#define A_SMB_STATUS_0 0x0010060020 -#define A_SMB_STATUS_1 0x0010060028 -#define A_SMB_CMD_0 0x0010060030 -#define A_SMB_CMD_1 0x0010060038 -#define A_SMB_START_0 0x0010060040 -#define A_SMB_START_1 0x0010060048 -#define A_SMB_DATA_0 0x0010060050 -#define A_SMB_DATA_1 0x0010060058 -#define A_SMB_CONTROL_0 0x0010060060 -#define A_SMB_CONTROL_1 0x0010060068 -#define A_SMB_PEC_0 0x0010060070 -#define A_SMB_PEC_1 0x0010060078 - -#define A_SMB_0 0x0010060000 -#define A_SMB_1 0x0010060008 -#define SMB_REGISTER_SPACING 0x8 -#define A_SMB_BASE(idx) (A_SMB_0+(idx)*SMB_REGISTER_SPACING) -#define A_SMB_REGISTER(idx, reg) (A_SMB_BASE(idx)+(reg)) - -#define R_SMB_XTRA 0x0000000000 -#define R_SMB_FREQ 0x0000000010 -#define R_SMB_STATUS 0x0000000020 -#define R_SMB_CMD 0x0000000030 -#define R_SMB_START 0x0000000040 -#define R_SMB_DATA 0x0000000050 -#define R_SMB_CONTROL 0x0000000060 -#define R_SMB_PEC 0x0000000070 - -/* ********************************************************************* - * Timer Registers - ********************************************************************* */ - -/* - * Watchdog timers - */ - -#define A_SCD_WDOG_0 0x0010020050 -#define A_SCD_WDOG_1 0x0010020150 -#define SCD_WDOG_SPACING 0x100 -#define SCD_NUM_WDOGS 2 -#define A_SCD_WDOG_BASE(w) (A_SCD_WDOG_0+SCD_WDOG_SPACING*(w)) -#define A_SCD_WDOG_REGISTER(w, r) (A_SCD_WDOG_BASE(w) + (r)) - -#define R_SCD_WDOG_INIT 0x0000000000 -#define R_SCD_WDOG_CNT 0x0000000008 -#define R_SCD_WDOG_CFG 0x0000000010 - -#define A_SCD_WDOG_INIT_0 0x0010020050 -#define A_SCD_WDOG_CNT_0 0x0010020058 -#define A_SCD_WDOG_CFG_0 0x0010020060 - -#define A_SCD_WDOG_INIT_1 0x0010020150 -#define A_SCD_WDOG_CNT_1 0x0010020158 -#define A_SCD_WDOG_CFG_1 0x0010020160 - -/* - * Generic timers - */ - -#define A_SCD_TIMER_0 0x0010020070 -#define A_SCD_TIMER_1 0x0010020078 -#define A_SCD_TIMER_2 0x0010020170 -#define A_SCD_TIMER_3 0x0010020178 -#define SCD_NUM_TIMERS 4 -#define A_SCD_TIMER_BASE(w) (A_SCD_TIMER_0+0x08*((w)&1)+0x100*(((w)&2)>>1)) -#define A_SCD_TIMER_REGISTER(w, r) (A_SCD_TIMER_BASE(w) + (r)) - -#define R_SCD_TIMER_INIT 0x0000000000 -#define R_SCD_TIMER_CNT 0x0000000010 -#define R_SCD_TIMER_CFG 0x0000000020 - -#define A_SCD_TIMER_INIT_0 0x0010020070 -#define A_SCD_TIMER_CNT_0 0x0010020080 -#define A_SCD_TIMER_CFG_0 0x0010020090 - -#define A_SCD_TIMER_INIT_1 0x0010020078 -#define A_SCD_TIMER_CNT_1 0x0010020088 -#define A_SCD_TIMER_CFG_1 0x0010020098 - -#define A_SCD_TIMER_INIT_2 0x0010020170 -#define A_SCD_TIMER_CNT_2 0x0010020180 -#define A_SCD_TIMER_CFG_2 0x0010020190 - -#define A_SCD_TIMER_INIT_3 0x0010020178 -#define A_SCD_TIMER_CNT_3 0x0010020188 -#define A_SCD_TIMER_CFG_3 0x0010020198 - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define A_SCD_SCRATCH 0x0010020C10 -#endif /* 1250 PASS2 || 112x PASS1 */ - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define A_SCD_ZBBUS_CYCLE_COUNT 0x0010030000 -#define A_SCD_ZBBUS_CYCLE_CP0 0x0010020C00 -#define A_SCD_ZBBUS_CYCLE_CP1 0x0010020C08 -#endif - -/* ********************************************************************* - * System Control Registers - ********************************************************************* */ - -#define A_SCD_SYSTEM_REVISION 0x0010020000 -#define A_SCD_SYSTEM_CFG 0x0010020008 -#define A_SCD_SYSTEM_MANUF 0x0010038000 - -/* ********************************************************************* - * System Address Trap Registers - ********************************************************************* */ - -#define A_ADDR_TRAP_INDEX 0x00100200B0 -#define A_ADDR_TRAP_REG 0x00100200B8 -#define A_ADDR_TRAP_UP_0 0x0010020400 -#define A_ADDR_TRAP_UP_1 0x0010020408 -#define A_ADDR_TRAP_UP_2 0x0010020410 -#define A_ADDR_TRAP_UP_3 0x0010020418 -#define A_ADDR_TRAP_DOWN_0 0x0010020420 -#define A_ADDR_TRAP_DOWN_1 0x0010020428 -#define A_ADDR_TRAP_DOWN_2 0x0010020430 -#define A_ADDR_TRAP_DOWN_3 0x0010020438 -#define A_ADDR_TRAP_CFG_0 0x0010020440 -#define A_ADDR_TRAP_CFG_1 0x0010020448 -#define A_ADDR_TRAP_CFG_2 0x0010020450 -#define A_ADDR_TRAP_CFG_3 0x0010020458 -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define A_ADDR_TRAP_REG_DEBUG 0x0010020460 -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - -#define ADDR_TRAP_SPACING 8 -#define NUM_ADDR_TRAP 4 -#define A_ADDR_TRAP_UP(n) (A_ADDR_TRAP_UP_0 + ((n) * ADDR_TRAP_SPACING)) -#define A_ADDR_TRAP_DOWN(n) (A_ADDR_TRAP_DOWN_0 + ((n) * ADDR_TRAP_SPACING)) -#define A_ADDR_TRAP_CFG(n) (A_ADDR_TRAP_CFG_0 + ((n) * ADDR_TRAP_SPACING)) - - -/* ********************************************************************* - * System Interrupt Mapper Registers - ********************************************************************* */ - -#define A_IMR_CPU0_BASE 0x0010020000 -#define A_IMR_CPU1_BASE 0x0010022000 -#define IMR_REGISTER_SPACING 0x2000 -#define IMR_REGISTER_SPACING_SHIFT 13 - -#define A_IMR_MAPPER(cpu) (A_IMR_CPU0_BASE+(cpu)*IMR_REGISTER_SPACING) -#define A_IMR_REGISTER(cpu, reg) (A_IMR_MAPPER(cpu)+(reg)) - -#define R_IMR_INTERRUPT_DIAG 0x0010 -#define R_IMR_INTERRUPT_LDT 0x0018 -#define R_IMR_INTERRUPT_MASK 0x0028 -#define R_IMR_INTERRUPT_TRACE 0x0038 -#define R_IMR_INTERRUPT_SOURCE_STATUS 0x0040 -#define R_IMR_LDT_INTERRUPT_SET 0x0048 -#define R_IMR_LDT_INTERRUPT 0x0018 -#define R_IMR_LDT_INTERRUPT_CLR 0x0020 -#define R_IMR_MAILBOX_CPU 0x00c0 -#define R_IMR_ALIAS_MAILBOX_CPU 0x1000 -#define R_IMR_MAILBOX_SET_CPU 0x00C8 -#define R_IMR_ALIAS_MAILBOX_SET_CPU 0x1008 -#define R_IMR_MAILBOX_CLR_CPU 0x00D0 -#define R_IMR_INTERRUPT_STATUS_BASE 0x0100 -#define R_IMR_INTERRUPT_STATUS_COUNT 7 -#define R_IMR_INTERRUPT_MAP_BASE 0x0200 -#define R_IMR_INTERRUPT_MAP_COUNT 64 - -/* - * these macros work together to build the address of a mailbox - * register, e.g., A_MAILBOX_REGISTER(R_IMR_MAILBOX_SET_CPU,1) - * for mbox_0_set_cpu2 returns 0x00100240C8 - */ -#define A_MAILBOX_REGISTER(reg,cpu) \ - (A_IMR_CPU0_BASE + (cpu * IMR_REGISTER_SPACING) + reg) - -/* ********************************************************************* - * System Performance Counter Registers - ********************************************************************* */ - -#define A_SCD_PERF_CNT_CFG 0x00100204C0 -#define A_SCD_PERF_CNT_0 0x00100204D0 -#define A_SCD_PERF_CNT_1 0x00100204D8 -#define A_SCD_PERF_CNT_2 0x00100204E0 -#define A_SCD_PERF_CNT_3 0x00100204E8 - -#define SCD_NUM_PERF_CNT 4 -#define SCD_PERF_CNT_SPACING 8 -#define A_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*SCD_PERF_CNT_SPACING)) - -/* ********************************************************************* - * System Bus Watcher Registers - ********************************************************************* */ - -#define A_SCD_BUS_ERR_STATUS 0x0010020880 -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define A_SCD_BUS_ERR_STATUS_DEBUG 0x00100208D0 -#define A_BUS_ERR_STATUS_DEBUG 0x00100208D0 -#endif /* 1250 PASS2 || 112x PASS1 */ -#define A_BUS_ERR_DATA_0 0x00100208A0 -#define A_BUS_ERR_DATA_1 0x00100208A8 -#define A_BUS_ERR_DATA_2 0x00100208B0 -#define A_BUS_ERR_DATA_3 0x00100208B8 -#define A_BUS_L2_ERRORS 0x00100208C0 -#define A_BUS_MEM_IO_ERRORS 0x00100208C8 - -/* ********************************************************************* - * System Debug Controller Registers - ********************************************************************* */ - -#define A_SCD_JTAG_BASE 0x0010000000 - -/* ********************************************************************* - * System Trace Buffer Registers - ********************************************************************* */ - -#define A_SCD_TRACE_CFG 0x0010020A00 -#define A_SCD_TRACE_READ 0x0010020A08 -#define A_SCD_TRACE_EVENT_0 0x0010020A20 -#define A_SCD_TRACE_EVENT_1 0x0010020A28 -#define A_SCD_TRACE_EVENT_2 0x0010020A30 -#define A_SCD_TRACE_EVENT_3 0x0010020A38 -#define A_SCD_TRACE_SEQUENCE_0 0x0010020A40 -#define A_SCD_TRACE_SEQUENCE_1 0x0010020A48 -#define A_SCD_TRACE_SEQUENCE_2 0x0010020A50 -#define A_SCD_TRACE_SEQUENCE_3 0x0010020A58 -#define A_SCD_TRACE_EVENT_4 0x0010020A60 -#define A_SCD_TRACE_EVENT_5 0x0010020A68 -#define A_SCD_TRACE_EVENT_6 0x0010020A70 -#define A_SCD_TRACE_EVENT_7 0x0010020A78 -#define A_SCD_TRACE_SEQUENCE_4 0x0010020A80 -#define A_SCD_TRACE_SEQUENCE_5 0x0010020A88 -#define A_SCD_TRACE_SEQUENCE_6 0x0010020A90 -#define A_SCD_TRACE_SEQUENCE_7 0x0010020A98 - -#define TRACE_REGISTER_SPACING 8 -#define TRACE_NUM_REGISTERS 8 -#define A_SCD_TRACE_EVENT(n) (((n) & 4) ? \ - (A_SCD_TRACE_EVENT_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \ - (A_SCD_TRACE_EVENT_0 + ((n) * TRACE_REGISTER_SPACING))) -#define A_SCD_TRACE_SEQUENCE(n) (((n) & 4) ? \ - (A_SCD_TRACE_SEQUENCE_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \ - (A_SCD_TRACE_SEQUENCE_0 + ((n) * TRACE_REGISTER_SPACING))) - -/* ********************************************************************* - * System Generic DMA Registers - ********************************************************************* */ - -#define A_DM_0 0x0010020B00 -#define A_DM_1 0x0010020B20 -#define A_DM_2 0x0010020B40 -#define A_DM_3 0x0010020B60 -#define DM_REGISTER_SPACING 0x20 -#define DM_NUM_CHANNELS 4 -#define A_DM_BASE(idx) (A_DM_0 + ((idx) * DM_REGISTER_SPACING)) -#define A_DM_REGISTER(idx, reg) (A_DM_BASE(idx) + (reg)) - -#define R_DM_DSCR_BASE 0x0000000000 -#define R_DM_DSCR_COUNT 0x0000000008 -#define R_DM_CUR_DSCR_ADDR 0x0000000010 -#define R_DM_DSCR_BASE_DEBUG 0x0000000018 - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define A_DM_PARTIAL_0 0x0010020ba0 -#define A_DM_PARTIAL_1 0x0010020ba8 -#define A_DM_PARTIAL_2 0x0010020bb0 -#define A_DM_PARTIAL_3 0x0010020bb8 -#define DM_PARTIAL_REGISTER_SPACING 0x8 -#define A_DM_PARTIAL(idx) (A_DM_PARTIAL_0 + ((idx) * DM_PARTIAL_REGISTER_SPACING)) -#endif /* 1250 PASS3 || 112x PASS1 */ - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define A_DM_CRC_0 0x0010020b80 -#define A_DM_CRC_1 0x0010020b90 -#define DM_CRC_REGISTER_SPACING 0x10 -#define DM_CRC_NUM_CHANNELS 2 -#define A_DM_CRC_BASE(idx) (A_DM_CRC_0 + ((idx) * DM_CRC_REGISTER_SPACING)) -#define A_DM_CRC_REGISTER(idx, reg) (A_DM_CRC_BASE(idx) + (reg)) - -#define R_CRC_DEF_0 0x00 -#define R_CTCP_DEF_0 0x08 -#endif /* 1250 PASS3 || 112x PASS1 */ - -/* ********************************************************************* - * Physical Address Map - ********************************************************************* */ - -#if SIBYTE_HDR_FEATURE_1250_112x -#define A_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000) -#define A_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024)) -#define A_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000) -#define A_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000) -#define A_PHYS_GENBUS _SB_MAKE64(0x0010090000) -#define A_PHYS_GENBUS_END _SB_MAKE64(0x0040000000) -#define A_PHYS_LDTPCI_IO_MATCH_BYTES_32 _SB_MAKE64(0x0040000000) -#define A_PHYS_LDTPCI_IO_MATCH_BITS_32 _SB_MAKE64(0x0060000000) -#define A_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000) -#define A_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000) -#define A_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000) -#define A_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000) -#define A_PHYS_LDT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000) -#define A_PHYS_LDTPCI_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000) -#define A_PHYS_LDTPCI_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000) -#define A_PHYS_LDT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000) -#define A_PHYS_LDTPCI_IO_MATCH_BITS _SB_MAKE64(0x00FC000000) -#define A_PHYS_LDTPCI_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000) -#define A_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000) -#define A_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024)) -#define A_PHYS_LDT_EXP _SB_MAKE64(0x8000000000) -#define A_PHYS_PCI_FULLACCESS_BYTES _SB_MAKE64(0xF000000000) -#define A_PHYS_PCI_FULLACCESS_BITS _SB_MAKE64(0xF100000000) -#define A_PHYS_RESERVED _SB_MAKE64(0xF200000000) -#define A_PHYS_RESERVED_SPECIAL_LDT _SB_MAKE64(0xFD00000000) - -#define A_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000) -#define PHYS_L2CACHE_NUM_WAYS 4 -#define A_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000080000) -#define A_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0180000) -#define A_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D01A0000) -#define A_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D01C0000) -#define A_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D01E0000) -#endif - - -#endif diff --git a/include/asm-mips/sibyte/sb1250_scd.h b/include/asm-mips/sibyte/sb1250_scd.h deleted file mode 100644 index e49c3e89b5ee..000000000000 --- a/include/asm-mips/sibyte/sb1250_scd.h +++ /dev/null @@ -1,654 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * SCD Constants and Macros File: sb1250_scd.h - * - * This module contains constants and macros useful for - * manipulating the System Control and Debug module on the 1250. - * - * SB1250 specification level: User's manual 1/02/02 - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003,2004,2005 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - -#ifndef _SB1250_SCD_H -#define _SB1250_SCD_H - -#include "sb1250_defs.h" - -/* ********************************************************************* - * System control/debug registers - ********************************************************************* */ - -/* - * System Revision Register (Table 4-1) - */ - -#define M_SYS_RESERVED _SB_MAKEMASK(8, 0) - -#define S_SYS_REVISION _SB_MAKE64(8) -#define M_SYS_REVISION _SB_MAKEMASK(8, S_SYS_REVISION) -#define V_SYS_REVISION(x) _SB_MAKEVALUE(x, S_SYS_REVISION) -#define G_SYS_REVISION(x) _SB_GETVALUE(x, S_SYS_REVISION, M_SYS_REVISION) - -#define K_SYS_REVISION_BCM1250_PASS1 0x01 - -#define K_SYS_REVISION_BCM1250_PASS2 0x03 -#define K_SYS_REVISION_BCM1250_A1 0x03 /* Pass 2.0 WB */ -#define K_SYS_REVISION_BCM1250_A2 0x04 /* Pass 2.0 FC */ -#define K_SYS_REVISION_BCM1250_A3 0x05 /* Pass 2.1 FC */ -#define K_SYS_REVISION_BCM1250_A4 0x06 /* Pass 2.1 WB */ -#define K_SYS_REVISION_BCM1250_A6 0x07 /* OR 0x04 (A2) w/WID != 0 */ -#define K_SYS_REVISION_BCM1250_A8 0x0b /* A8/A10 */ -#define K_SYS_REVISION_BCM1250_A9 0x08 -#define K_SYS_REVISION_BCM1250_A10 K_SYS_REVISION_BCM1250_A8 - -#define K_SYS_REVISION_BCM1250_PASS2_2 0x10 -#define K_SYS_REVISION_BCM1250_B0 K_SYS_REVISION_BCM1250_B1 -#define K_SYS_REVISION_BCM1250_B1 0x10 -#define K_SYS_REVISION_BCM1250_B2 0x11 - -#define K_SYS_REVISION_BCM1250_C0 0x20 -#define K_SYS_REVISION_BCM1250_C1 0x21 -#define K_SYS_REVISION_BCM1250_C2 0x22 -#define K_SYS_REVISION_BCM1250_C3 0x23 - -#if SIBYTE_HDR_FEATURE_CHIP(1250) -/* XXX: discourage people from using these constants. */ -#define K_SYS_REVISION_PASS1 K_SYS_REVISION_BCM1250_PASS1 -#define K_SYS_REVISION_PASS2 K_SYS_REVISION_BCM1250_PASS2 -#define K_SYS_REVISION_PASS2_2 K_SYS_REVISION_BCM1250_PASS2_2 -#define K_SYS_REVISION_PASS3 K_SYS_REVISION_BCM1250_PASS3 -#define K_SYS_REVISION_BCM1250_PASS3 K_SYS_REVISION_BCM1250_C0 -#endif /* 1250 */ - -#define K_SYS_REVISION_BCM112x_A1 0x20 -#define K_SYS_REVISION_BCM112x_A2 0x21 -#define K_SYS_REVISION_BCM112x_A3 0x22 -#define K_SYS_REVISION_BCM112x_A4 0x23 -#define K_SYS_REVISION_BCM112x_B0 0x30 - -#define K_SYS_REVISION_BCM1480_S0 0x01 -#define K_SYS_REVISION_BCM1480_A1 0x02 -#define K_SYS_REVISION_BCM1480_A2 0x03 -#define K_SYS_REVISION_BCM1480_A3 0x04 -#define K_SYS_REVISION_BCM1480_B0 0x11 - -/*Cache size - 23:20 of revision register*/ -#define S_SYS_L2C_SIZE _SB_MAKE64(20) -#define M_SYS_L2C_SIZE _SB_MAKEMASK(4, S_SYS_L2C_SIZE) -#define V_SYS_L2C_SIZE(x) _SB_MAKEVALUE(x, S_SYS_L2C_SIZE) -#define G_SYS_L2C_SIZE(x) _SB_GETVALUE(x, S_SYS_L2C_SIZE, M_SYS_L2C_SIZE) - -#define K_SYS_L2C_SIZE_1MB 0 -#define K_SYS_L2C_SIZE_512KB 5 -#define K_SYS_L2C_SIZE_256KB 2 -#define K_SYS_L2C_SIZE_128KB 1 - -#define K_SYS_L2C_SIZE_BCM1250 K_SYS_L2C_SIZE_512KB -#define K_SYS_L2C_SIZE_BCM1125 K_SYS_L2C_SIZE_256KB -#define K_SYS_L2C_SIZE_BCM1122 K_SYS_L2C_SIZE_128KB - - -/* Number of CPU cores, bits 27:24 of revision register*/ -#define S_SYS_NUM_CPUS _SB_MAKE64(24) -#define M_SYS_NUM_CPUS _SB_MAKEMASK(4, S_SYS_NUM_CPUS) -#define V_SYS_NUM_CPUS(x) _SB_MAKEVALUE(x, S_SYS_NUM_CPUS) -#define G_SYS_NUM_CPUS(x) _SB_GETVALUE(x, S_SYS_NUM_CPUS, M_SYS_NUM_CPUS) - - -/* XXX: discourage people from using these constants. */ -#define S_SYS_PART _SB_MAKE64(16) -#define M_SYS_PART _SB_MAKEMASK(16, S_SYS_PART) -#define V_SYS_PART(x) _SB_MAKEVALUE(x, S_SYS_PART) -#define G_SYS_PART(x) _SB_GETVALUE(x, S_SYS_PART, M_SYS_PART) - -/* XXX: discourage people from using these constants. */ -#define K_SYS_PART_SB1250 0x1250 -#define K_SYS_PART_BCM1120 0x1121 -#define K_SYS_PART_BCM1125 0x1123 -#define K_SYS_PART_BCM1125H 0x1124 -#define K_SYS_PART_BCM1122 0x1113 - - -/* The "peripheral set" (SOC type) is the low 4 bits of the "part" field. */ -#define S_SYS_SOC_TYPE _SB_MAKE64(16) -#define M_SYS_SOC_TYPE _SB_MAKEMASK(4, S_SYS_SOC_TYPE) -#define V_SYS_SOC_TYPE(x) _SB_MAKEVALUE(x, S_SYS_SOC_TYPE) -#define G_SYS_SOC_TYPE(x) _SB_GETVALUE(x, S_SYS_SOC_TYPE, M_SYS_SOC_TYPE) - -#define K_SYS_SOC_TYPE_BCM1250 0x0 -#define K_SYS_SOC_TYPE_BCM1120 0x1 -#define K_SYS_SOC_TYPE_BCM1250_ALT 0x2 /* 1250pass2 w/ 1/4 L2. */ -#define K_SYS_SOC_TYPE_BCM1125 0x3 -#define K_SYS_SOC_TYPE_BCM1125H 0x4 -#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5 /* 1250pass2 w/ 1/2 L2. */ -#define K_SYS_SOC_TYPE_BCM1x80 0x6 -#define K_SYS_SOC_TYPE_BCM1x55 0x7 - -/* - * Calculate correct SOC type given a copy of system revision register. - * - * (For the assembler version, sysrev and dest may be the same register. - * Also, it clobbers AT.) - */ -#ifdef __ASSEMBLER__ -#define SYS_SOC_TYPE(dest, sysrev) \ - .set push ; \ - .set reorder ; \ - dsrl dest, sysrev, S_SYS_SOC_TYPE ; \ - andi dest, dest, (M_SYS_SOC_TYPE >> S_SYS_SOC_TYPE); \ - beq dest, K_SYS_SOC_TYPE_BCM1250_ALT, 991f ; \ - beq dest, K_SYS_SOC_TYPE_BCM1250_ALT2, 991f ; \ - b 992f ; \ -991: li dest, K_SYS_SOC_TYPE_BCM1250 ; \ -992: \ - .set pop -#else -#define SYS_SOC_TYPE(sysrev) \ - ((G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT \ - || G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT2) \ - ? K_SYS_SOC_TYPE_BCM1250 : G_SYS_SOC_TYPE(sysrev)) -#endif - -#define S_SYS_WID _SB_MAKE64(32) -#define M_SYS_WID _SB_MAKEMASK(32, S_SYS_WID) -#define V_SYS_WID(x) _SB_MAKEVALUE(x, S_SYS_WID) -#define G_SYS_WID(x) _SB_GETVALUE(x, S_SYS_WID, M_SYS_WID) - -/* - * System Manufacturing Register - * Register: SCD_SYSTEM_MANUF - */ - -#if SIBYTE_HDR_FEATURE_1250_112x -/* Wafer ID: bits 31:0 */ -#define S_SYS_WAFERID1_200 _SB_MAKE64(0) -#define M_SYS_WAFERID1_200 _SB_MAKEMASK(32, S_SYS_WAFERID1_200) -#define V_SYS_WAFERID1_200(x) _SB_MAKEVALUE(x, S_SYS_WAFERID1_200) -#define G_SYS_WAFERID1_200(x) _SB_GETVALUE(x, S_SYS_WAFERID1_200, M_SYS_WAFERID1_200) - -#define S_SYS_BIN _SB_MAKE64(32) -#define M_SYS_BIN _SB_MAKEMASK(4, S_SYS_BIN) -#define V_SYS_BIN(x) _SB_MAKEVALUE(x, S_SYS_BIN) -#define G_SYS_BIN(x) _SB_GETVALUE(x, S_SYS_BIN, M_SYS_BIN) - -/* Wafer ID: bits 39:36 */ -#define S_SYS_WAFERID2_200 _SB_MAKE64(36) -#define M_SYS_WAFERID2_200 _SB_MAKEMASK(4, S_SYS_WAFERID2_200) -#define V_SYS_WAFERID2_200(x) _SB_MAKEVALUE(x, S_SYS_WAFERID2_200) -#define G_SYS_WAFERID2_200(x) _SB_GETVALUE(x, S_SYS_WAFERID2_200, M_SYS_WAFERID2_200) - -/* Wafer ID: bits 39:0 */ -#define S_SYS_WAFERID_300 _SB_MAKE64(0) -#define M_SYS_WAFERID_300 _SB_MAKEMASK(40, S_SYS_WAFERID_300) -#define V_SYS_WAFERID_300(x) _SB_MAKEVALUE(x, S_SYS_WAFERID_300) -#define G_SYS_WAFERID_300(x) _SB_GETVALUE(x, S_SYS_WAFERID_300, M_SYS_WAFERID_300) - -#define S_SYS_XPOS _SB_MAKE64(40) -#define M_SYS_XPOS _SB_MAKEMASK(6, S_SYS_XPOS) -#define V_SYS_XPOS(x) _SB_MAKEVALUE(x, S_SYS_XPOS) -#define G_SYS_XPOS(x) _SB_GETVALUE(x, S_SYS_XPOS, M_SYS_XPOS) - -#define S_SYS_YPOS _SB_MAKE64(46) -#define M_SYS_YPOS _SB_MAKEMASK(6, S_SYS_YPOS) -#define V_SYS_YPOS(x) _SB_MAKEVALUE(x, S_SYS_YPOS) -#define G_SYS_YPOS(x) _SB_GETVALUE(x, S_SYS_YPOS, M_SYS_YPOS) -#endif - - -/* - * System Config Register (Table 4-2) - * Register: SCD_SYSTEM_CFG - */ - -#if SIBYTE_HDR_FEATURE_1250_112x -#define M_SYS_LDT_PLL_BYP _SB_MAKEMASK1(3) -#define M_SYS_PCI_SYNC_TEST_MODE _SB_MAKEMASK1(4) -#define M_SYS_IOB0_DIV _SB_MAKEMASK1(5) -#define M_SYS_IOB1_DIV _SB_MAKEMASK1(6) - -#define S_SYS_PLL_DIV _SB_MAKE64(7) -#define M_SYS_PLL_DIV _SB_MAKEMASK(5, S_SYS_PLL_DIV) -#define V_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_SYS_PLL_DIV) -#define G_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_SYS_PLL_DIV, M_SYS_PLL_DIV) - -#define M_SYS_SER0_ENABLE _SB_MAKEMASK1(12) -#define M_SYS_SER0_RSTB_EN _SB_MAKEMASK1(13) -#define M_SYS_SER1_ENABLE _SB_MAKEMASK1(14) -#define M_SYS_SER1_RSTB_EN _SB_MAKEMASK1(15) -#define M_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) - -#define S_SYS_BOOT_MODE _SB_MAKE64(17) -#define M_SYS_BOOT_MODE _SB_MAKEMASK(2, S_SYS_BOOT_MODE) -#define V_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_SYS_BOOT_MODE) -#define G_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_SYS_BOOT_MODE, M_SYS_BOOT_MODE) -#define K_SYS_BOOT_MODE_ROM32 0 -#define K_SYS_BOOT_MODE_ROM8 1 -#define K_SYS_BOOT_MODE_SMBUS_SMALL 2 -#define K_SYS_BOOT_MODE_SMBUS_BIG 3 - -#define M_SYS_PCI_HOST _SB_MAKEMASK1(19) -#define M_SYS_PCI_ARBITER _SB_MAKEMASK1(20) -#define M_SYS_SOUTH_ON_LDT _SB_MAKEMASK1(21) -#define M_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) -#define M_SYS_GENCLK_EN _SB_MAKEMASK1(23) -#define M_SYS_LDT_TEST_EN _SB_MAKEMASK1(24) -#define M_SYS_GEN_PARITY_EN _SB_MAKEMASK1(25) - -#define S_SYS_CONFIG 26 -#define M_SYS_CONFIG _SB_MAKEMASK(6, S_SYS_CONFIG) -#define V_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_SYS_CONFIG) -#define G_SYS_CONFIG(x) _SB_GETVALUE(x, S_SYS_CONFIG, M_SYS_CONFIG) - -/* The following bits are writeable by JTAG only. */ - -#define M_SYS_CLKSTOP _SB_MAKEMASK1(32) -#define M_SYS_CLKSTEP _SB_MAKEMASK1(33) - -#define S_SYS_CLKCOUNT 34 -#define M_SYS_CLKCOUNT _SB_MAKEMASK(8, S_SYS_CLKCOUNT) -#define V_SYS_CLKCOUNT(x) _SB_MAKEVALUE(x, S_SYS_CLKCOUNT) -#define G_SYS_CLKCOUNT(x) _SB_GETVALUE(x, S_SYS_CLKCOUNT, M_SYS_CLKCOUNT) - -#define M_SYS_PLL_BYPASS _SB_MAKEMASK1(42) - -#define S_SYS_PLL_IREF 43 -#define M_SYS_PLL_IREF _SB_MAKEMASK(2, S_SYS_PLL_IREF) - -#define S_SYS_PLL_VCO 45 -#define M_SYS_PLL_VCO _SB_MAKEMASK(2, S_SYS_PLL_VCO) - -#define S_SYS_PLL_VREG 47 -#define M_SYS_PLL_VREG _SB_MAKEMASK(2, S_SYS_PLL_VREG) - -#define M_SYS_MEM_RESET _SB_MAKEMASK1(49) -#define M_SYS_L2C_RESET _SB_MAKEMASK1(50) -#define M_SYS_IO_RESET_0 _SB_MAKEMASK1(51) -#define M_SYS_IO_RESET_1 _SB_MAKEMASK1(52) -#define M_SYS_SCD_RESET _SB_MAKEMASK1(53) - -/* End of bits writable by JTAG only. */ - -#define M_SYS_CPU_RESET_0 _SB_MAKEMASK1(54) -#define M_SYS_CPU_RESET_1 _SB_MAKEMASK1(55) - -#define M_SYS_UNICPU0 _SB_MAKEMASK1(56) -#define M_SYS_UNICPU1 _SB_MAKEMASK1(57) - -#define M_SYS_SB_SOFTRES _SB_MAKEMASK1(58) -#define M_SYS_EXT_RESET _SB_MAKEMASK1(59) -#define M_SYS_SYSTEM_RESET _SB_MAKEMASK1(60) - -#define M_SYS_MISR_MODE _SB_MAKEMASK1(61) -#define M_SYS_MISR_RESET _SB_MAKEMASK1(62) - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define M_SYS_SW_FLAG _SB_MAKEMASK1(63) -#endif /* 1250 PASS2 || 112x PASS1 */ - -#endif - - -/* - * Mailbox Registers (Table 4-3) - * Registers: SCD_MBOX_CPU_x - */ - -#define S_MBOX_INT_3 0 -#define M_MBOX_INT_3 _SB_MAKEMASK(16, S_MBOX_INT_3) -#define S_MBOX_INT_2 16 -#define M_MBOX_INT_2 _SB_MAKEMASK(16, S_MBOX_INT_2) -#define S_MBOX_INT_1 32 -#define M_MBOX_INT_1 _SB_MAKEMASK(16, S_MBOX_INT_1) -#define S_MBOX_INT_0 48 -#define M_MBOX_INT_0 _SB_MAKEMASK(16, S_MBOX_INT_0) - -/* - * Watchdog Registers (Table 4-8) (Table 4-9) (Table 4-10) - * Registers: SCD_WDOG_INIT_CNT_x - */ - -#define V_SCD_WDOG_FREQ 1000000 - -#define S_SCD_WDOG_INIT 0 -#define M_SCD_WDOG_INIT _SB_MAKEMASK(23, S_SCD_WDOG_INIT) - -#define S_SCD_WDOG_CNT 0 -#define M_SCD_WDOG_CNT _SB_MAKEMASK(23, S_SCD_WDOG_CNT) - -#define S_SCD_WDOG_ENABLE 0 -#define M_SCD_WDOG_ENABLE _SB_MAKEMASK1(S_SCD_WDOG_ENABLE) - -#define S_SCD_WDOG_RESET_TYPE 2 -#define M_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(3, S_SCD_WDOG_RESET_TYPE) -#define V_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x, S_SCD_WDOG_RESET_TYPE) -#define G_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x, S_SCD_WDOG_RESET_TYPE, M_SCD_WDOG_RESET_TYPE) - -#define K_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ -#define K_SCD_WDOG_RESET_SOFT 1 -#define K_SCD_WDOG_RESET_CPU0 3 -#define K_SCD_WDOG_RESET_CPU1 5 -#define K_SCD_WDOG_RESET_BOTH_CPUS 7 - -/* This feature is present in 1250 C0 and later, but *not* in 112x A revs. */ -#if SIBYTE_HDR_FEATURE(1250, PASS3) -#define S_SCD_WDOG_HAS_RESET 8 -#define M_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(S_SCD_WDOG_HAS_RESET) -#endif - - -/* - * Timer Registers (Table 4-11) (Table 4-12) (Table 4-13) - */ - -#define V_SCD_TIMER_FREQ 1000000 - -#define S_SCD_TIMER_INIT 0 -#define M_SCD_TIMER_INIT _SB_MAKEMASK(23, S_SCD_TIMER_INIT) -#define V_SCD_TIMER_INIT(x) _SB_MAKEVALUE(x, S_SCD_TIMER_INIT) -#define G_SCD_TIMER_INIT(x) _SB_GETVALUE(x, S_SCD_TIMER_INIT, M_SCD_TIMER_INIT) - -#define V_SCD_TIMER_WIDTH 23 -#define S_SCD_TIMER_CNT 0 -#define M_SCD_TIMER_CNT _SB_MAKEMASK(V_SCD_TIMER_WIDTH, S_SCD_TIMER_CNT) -#define V_SCD_TIMER_CNT(x) _SB_MAKEVALUE(x, S_SCD_TIMER_CNT) -#define G_SCD_TIMER_CNT(x) _SB_GETVALUE(x, S_SCD_TIMER_CNT, M_SCD_TIMER_CNT) - -#define M_SCD_TIMER_ENABLE _SB_MAKEMASK1(0) -#define M_SCD_TIMER_MODE _SB_MAKEMASK1(1) -#define M_SCD_TIMER_MODE_CONTINUOUS M_SCD_TIMER_MODE - -/* - * System Performance Counters - */ - -#define S_SPC_CFG_SRC0 0 -#define M_SPC_CFG_SRC0 _SB_MAKEMASK(8, S_SPC_CFG_SRC0) -#define V_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC0) -#define G_SPC_CFG_SRC0(x) _SB_GETVALUE(x, S_SPC_CFG_SRC0, M_SPC_CFG_SRC0) - -#define S_SPC_CFG_SRC1 8 -#define M_SPC_CFG_SRC1 _SB_MAKEMASK(8, S_SPC_CFG_SRC1) -#define V_SPC_CFG_SRC1(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC1) -#define G_SPC_CFG_SRC1(x) _SB_GETVALUE(x, S_SPC_CFG_SRC1, M_SPC_CFG_SRC1) - -#define S_SPC_CFG_SRC2 16 -#define M_SPC_CFG_SRC2 _SB_MAKEMASK(8, S_SPC_CFG_SRC2) -#define V_SPC_CFG_SRC2(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC2) -#define G_SPC_CFG_SRC2(x) _SB_GETVALUE(x, S_SPC_CFG_SRC2, M_SPC_CFG_SRC2) - -#define S_SPC_CFG_SRC3 24 -#define M_SPC_CFG_SRC3 _SB_MAKEMASK(8, S_SPC_CFG_SRC3) -#define V_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC3) -#define G_SPC_CFG_SRC3(x) _SB_GETVALUE(x, S_SPC_CFG_SRC3, M_SPC_CFG_SRC3) - -#if SIBYTE_HDR_FEATURE_1250_112x -#define M_SPC_CFG_CLEAR _SB_MAKEMASK1(32) -#define M_SPC_CFG_ENABLE _SB_MAKEMASK1(33) -#endif - - -/* - * Bus Watcher - */ - -#define S_SCD_BERR_TID 8 -#define M_SCD_BERR_TID _SB_MAKEMASK(10, S_SCD_BERR_TID) -#define V_SCD_BERR_TID(x) _SB_MAKEVALUE(x, S_SCD_BERR_TID) -#define G_SCD_BERR_TID(x) _SB_GETVALUE(x, S_SCD_BERR_TID, M_SCD_BERR_TID) - -#define S_SCD_BERR_RID 18 -#define M_SCD_BERR_RID _SB_MAKEMASK(4, S_SCD_BERR_RID) -#define V_SCD_BERR_RID(x) _SB_MAKEVALUE(x, S_SCD_BERR_RID) -#define G_SCD_BERR_RID(x) _SB_GETVALUE(x, S_SCD_BERR_RID, M_SCD_BERR_RID) - -#define S_SCD_BERR_DCODE 22 -#define M_SCD_BERR_DCODE _SB_MAKEMASK(3, S_SCD_BERR_DCODE) -#define V_SCD_BERR_DCODE(x) _SB_MAKEVALUE(x, S_SCD_BERR_DCODE) -#define G_SCD_BERR_DCODE(x) _SB_GETVALUE(x, S_SCD_BERR_DCODE, M_SCD_BERR_DCODE) - -#define M_SCD_BERR_MULTERRS _SB_MAKEMASK1(30) - - -#define S_SCD_L2ECC_CORR_D 0 -#define M_SCD_L2ECC_CORR_D _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_D) -#define V_SCD_L2ECC_CORR_D(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_D) -#define G_SCD_L2ECC_CORR_D(x) _SB_GETVALUE(x, S_SCD_L2ECC_CORR_D, M_SCD_L2ECC_CORR_D) - -#define S_SCD_L2ECC_BAD_D 8 -#define M_SCD_L2ECC_BAD_D _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_D) -#define V_SCD_L2ECC_BAD_D(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_D) -#define G_SCD_L2ECC_BAD_D(x) _SB_GETVALUE(x, S_SCD_L2ECC_BAD_D, M_SCD_L2ECC_BAD_D) - -#define S_SCD_L2ECC_CORR_T 16 -#define M_SCD_L2ECC_CORR_T _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_T) -#define V_SCD_L2ECC_CORR_T(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_T) -#define G_SCD_L2ECC_CORR_T(x) _SB_GETVALUE(x, S_SCD_L2ECC_CORR_T, M_SCD_L2ECC_CORR_T) - -#define S_SCD_L2ECC_BAD_T 24 -#define M_SCD_L2ECC_BAD_T _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_T) -#define V_SCD_L2ECC_BAD_T(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_T) -#define G_SCD_L2ECC_BAD_T(x) _SB_GETVALUE(x, S_SCD_L2ECC_BAD_T, M_SCD_L2ECC_BAD_T) - -#define S_SCD_MEM_ECC_CORR 0 -#define M_SCD_MEM_ECC_CORR _SB_MAKEMASK(8, S_SCD_MEM_ECC_CORR) -#define V_SCD_MEM_ECC_CORR(x) _SB_MAKEVALUE(x, S_SCD_MEM_ECC_CORR) -#define G_SCD_MEM_ECC_CORR(x) _SB_GETVALUE(x, S_SCD_MEM_ECC_CORR, M_SCD_MEM_ECC_CORR) - -#define S_SCD_MEM_ECC_BAD 8 -#define M_SCD_MEM_ECC_BAD _SB_MAKEMASK(8, S_SCD_MEM_ECC_BAD) -#define V_SCD_MEM_ECC_BAD(x) _SB_MAKEVALUE(x, S_SCD_MEM_ECC_BAD) -#define G_SCD_MEM_ECC_BAD(x) _SB_GETVALUE(x, S_SCD_MEM_ECC_BAD, M_SCD_MEM_ECC_BAD) - -#define S_SCD_MEM_BUSERR 16 -#define M_SCD_MEM_BUSERR _SB_MAKEMASK(8, S_SCD_MEM_BUSERR) -#define V_SCD_MEM_BUSERR(x) _SB_MAKEVALUE(x, S_SCD_MEM_BUSERR) -#define G_SCD_MEM_BUSERR(x) _SB_GETVALUE(x, S_SCD_MEM_BUSERR, M_SCD_MEM_BUSERR) - - -/* - * Address Trap Registers - */ - -#if SIBYTE_HDR_FEATURE_1250_112x -#define M_ATRAP_INDEX _SB_MAKEMASK(4, 0) -#define M_ATRAP_ADDRESS _SB_MAKEMASK(40, 0) - -#define S_ATRAP_CFG_CNT 0 -#define M_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_ATRAP_CFG_CNT) -#define V_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_CNT) -#define G_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_ATRAP_CFG_CNT, M_ATRAP_CFG_CNT) - -#define M_ATRAP_CFG_WRITE _SB_MAKEMASK1(3) -#define M_ATRAP_CFG_ALL _SB_MAKEMASK1(4) -#define M_ATRAP_CFG_INV _SB_MAKEMASK1(5) -#define M_ATRAP_CFG_USESRC _SB_MAKEMASK1(6) -#define M_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7) - -#define S_ATRAP_CFG_AGENTID 8 -#define M_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_ATRAP_CFG_AGENTID) -#define V_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_AGENTID) -#define G_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_ATRAP_CFG_AGENTID, M_ATRAP_CFG_AGENTID) - -#define K_BUS_AGENT_CPU0 0 -#define K_BUS_AGENT_CPU1 1 -#define K_BUS_AGENT_IOB0 2 -#define K_BUS_AGENT_IOB1 3 -#define K_BUS_AGENT_SCD 4 -#define K_BUS_AGENT_L2C 6 -#define K_BUS_AGENT_MC 7 - -#define S_ATRAP_CFG_CATTR 12 -#define M_ATRAP_CFG_CATTR _SB_MAKEMASK(3, S_ATRAP_CFG_CATTR) -#define V_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_CATTR) -#define G_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_ATRAP_CFG_CATTR, M_ATRAP_CFG_CATTR) - -#define K_ATRAP_CFG_CATTR_IGNORE 0 -#define K_ATRAP_CFG_CATTR_UNC 1 -#define K_ATRAP_CFG_CATTR_CACHEABLE 2 -#define K_ATRAP_CFG_CATTR_NONCOH 3 -#define K_ATRAP_CFG_CATTR_COHERENT 4 -#define K_ATRAP_CFG_CATTR_NOTUNC 5 -#define K_ATRAP_CFG_CATTR_NOTNONCOH 6 -#define K_ATRAP_CFG_CATTR_NOTCOHERENT 7 - -#endif /* 1250/112x */ - -/* - * Trace Buffer Config register - */ - -#define M_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0) -#define M_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1) -#define M_SCD_TRACE_CFG_START _SB_MAKEMASK1(2) -#define M_SCD_TRACE_CFG_STOP _SB_MAKEMASK1(3) -#define M_SCD_TRACE_CFG_FREEZE _SB_MAKEMASK1(4) -#define M_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5) -#define M_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6) -#define M_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_SCD_TRACE_CFG_FORCECNT _SB_MAKEMASK1(8) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - -/* - * This field is the same on the 1250/112x and 1480, just located in - * a slightly different place in the register. - */ -#if SIBYTE_HDR_FEATURE_1250_112x -#define S_SCD_TRACE_CFG_CUR_ADDR 10 -#else -#if SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_SCD_TRACE_CFG_CUR_ADDR 24 -#endif /* 1480 */ -#endif /* 1250/112x */ - -#define M_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8, S_SCD_TRACE_CFG_CUR_ADDR) -#define V_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR) -#define G_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR, M_SCD_TRACE_CFG_CUR_ADDR) - -/* - * Trace Event registers - */ - -#define S_SCD_TREVT_ADDR_MATCH 0 -#define M_SCD_TREVT_ADDR_MATCH _SB_MAKEMASK(4, S_SCD_TREVT_ADDR_MATCH) -#define V_SCD_TREVT_ADDR_MATCH(x) _SB_MAKEVALUE(x, S_SCD_TREVT_ADDR_MATCH) -#define G_SCD_TREVT_ADDR_MATCH(x) _SB_GETVALUE(x, S_SCD_TREVT_ADDR_MATCH, M_SCD_TREVT_ADDR_MATCH) - -#define M_SCD_TREVT_REQID_MATCH _SB_MAKEMASK1(4) -#define M_SCD_TREVT_DATAID_MATCH _SB_MAKEMASK1(5) -#define M_SCD_TREVT_RESPID_MATCH _SB_MAKEMASK1(6) -#define M_SCD_TREVT_INTERRUPT _SB_MAKEMASK1(7) -#define M_SCD_TREVT_DEBUG_PIN _SB_MAKEMASK1(9) -#define M_SCD_TREVT_WRITE _SB_MAKEMASK1(10) -#define M_SCD_TREVT_READ _SB_MAKEMASK1(11) - -#define S_SCD_TREVT_REQID 12 -#define M_SCD_TREVT_REQID _SB_MAKEMASK(4, S_SCD_TREVT_REQID) -#define V_SCD_TREVT_REQID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_REQID) -#define G_SCD_TREVT_REQID(x) _SB_GETVALUE(x, S_SCD_TREVT_REQID, M_SCD_TREVT_REQID) - -#define S_SCD_TREVT_RESPID 16 -#define M_SCD_TREVT_RESPID _SB_MAKEMASK(4, S_SCD_TREVT_RESPID) -#define V_SCD_TREVT_RESPID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_RESPID) -#define G_SCD_TREVT_RESPID(x) _SB_GETVALUE(x, S_SCD_TREVT_RESPID, M_SCD_TREVT_RESPID) - -#define S_SCD_TREVT_DATAID 20 -#define M_SCD_TREVT_DATAID _SB_MAKEMASK(4, S_SCD_TREVT_DATAID) -#define V_SCD_TREVT_DATAID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_DATAID) -#define G_SCD_TREVT_DATAID(x) _SB_GETVALUE(x, S_SCD_TREVT_DATAID, M_SCD_TREVT_DATID) - -#define S_SCD_TREVT_COUNT 24 -#define M_SCD_TREVT_COUNT _SB_MAKEMASK(8, S_SCD_TREVT_COUNT) -#define V_SCD_TREVT_COUNT(x) _SB_MAKEVALUE(x, S_SCD_TREVT_COUNT) -#define G_SCD_TREVT_COUNT(x) _SB_GETVALUE(x, S_SCD_TREVT_COUNT, M_SCD_TREVT_COUNT) - -/* - * Trace Sequence registers - */ - -#define S_SCD_TRSEQ_EVENT4 0 -#define M_SCD_TRSEQ_EVENT4 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT4) -#define V_SCD_TRSEQ_EVENT4(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT4) -#define G_SCD_TRSEQ_EVENT4(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT4, M_SCD_TRSEQ_EVENT4) - -#define S_SCD_TRSEQ_EVENT3 4 -#define M_SCD_TRSEQ_EVENT3 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT3) -#define V_SCD_TRSEQ_EVENT3(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT3) -#define G_SCD_TRSEQ_EVENT3(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT3, M_SCD_TRSEQ_EVENT3) - -#define S_SCD_TRSEQ_EVENT2 8 -#define M_SCD_TRSEQ_EVENT2 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT2) -#define V_SCD_TRSEQ_EVENT2(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT2) -#define G_SCD_TRSEQ_EVENT2(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT2, M_SCD_TRSEQ_EVENT2) - -#define S_SCD_TRSEQ_EVENT1 12 -#define M_SCD_TRSEQ_EVENT1 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT1) -#define V_SCD_TRSEQ_EVENT1(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT1) -#define G_SCD_TRSEQ_EVENT1(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT1, M_SCD_TRSEQ_EVENT1) - -#define K_SCD_TRSEQ_E0 0 -#define K_SCD_TRSEQ_E1 1 -#define K_SCD_TRSEQ_E2 2 -#define K_SCD_TRSEQ_E3 3 -#define K_SCD_TRSEQ_E0_E1 4 -#define K_SCD_TRSEQ_E1_E2 5 -#define K_SCD_TRSEQ_E2_E3 6 -#define K_SCD_TRSEQ_E0_E1_E2 7 -#define K_SCD_TRSEQ_E0_E1_E2_E3 8 -#define K_SCD_TRSEQ_E0E1 9 -#define K_SCD_TRSEQ_E0E1E2 10 -#define K_SCD_TRSEQ_E0E1E2E3 11 -#define K_SCD_TRSEQ_E0E1_E2 12 -#define K_SCD_TRSEQ_E0E1_E2E3 13 -#define K_SCD_TRSEQ_E0E1_E2_E3 14 -#define K_SCD_TRSEQ_IGNORED 15 - -#define K_SCD_TRSEQ_TRIGGER_ALL (V_SCD_TRSEQ_EVENT1(K_SCD_TRSEQ_IGNORED) | \ - V_SCD_TRSEQ_EVENT2(K_SCD_TRSEQ_IGNORED) | \ - V_SCD_TRSEQ_EVENT3(K_SCD_TRSEQ_IGNORED) | \ - V_SCD_TRSEQ_EVENT4(K_SCD_TRSEQ_IGNORED)) - -#define S_SCD_TRSEQ_FUNCTION 16 -#define M_SCD_TRSEQ_FUNCTION _SB_MAKEMASK(4, S_SCD_TRSEQ_FUNCTION) -#define V_SCD_TRSEQ_FUNCTION(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_FUNCTION) -#define G_SCD_TRSEQ_FUNCTION(x) _SB_GETVALUE(x, S_SCD_TRSEQ_FUNCTION, M_SCD_TRSEQ_FUNCTION) - -#define K_SCD_TRSEQ_FUNC_NOP 0 -#define K_SCD_TRSEQ_FUNC_START 1 -#define K_SCD_TRSEQ_FUNC_STOP 2 -#define K_SCD_TRSEQ_FUNC_FREEZE 3 - -#define V_SCD_TRSEQ_FUNC_NOP V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_NOP) -#define V_SCD_TRSEQ_FUNC_START V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_START) -#define V_SCD_TRSEQ_FUNC_STOP V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_STOP) -#define V_SCD_TRSEQ_FUNC_FREEZE V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_FREEZE) - -#define M_SCD_TRSEQ_ASAMPLE _SB_MAKEMASK1(18) -#define M_SCD_TRSEQ_DSAMPLE _SB_MAKEMASK1(19) -#define M_SCD_TRSEQ_DEBUGPIN _SB_MAKEMASK1(20) -#define M_SCD_TRSEQ_DEBUGCPU _SB_MAKEMASK1(21) -#define M_SCD_TRSEQ_CLEARUSE _SB_MAKEMASK1(22) -#define M_SCD_TRSEQ_ALLD_A _SB_MAKEMASK1(23) -#define M_SCD_TRSEQ_ALL_A _SB_MAKEMASK1(24) - -#endif diff --git a/include/asm-mips/sibyte/sb1250_smbus.h b/include/asm-mips/sibyte/sb1250_smbus.h deleted file mode 100644 index 04769923cf1e..000000000000 --- a/include/asm-mips/sibyte/sb1250_smbus.h +++ /dev/null @@ -1,204 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * SMBUS Constants File: sb1250_smbus.h - * - * This module contains constants and macros useful for - * manipulating the SB1250's SMbus devices. - * - * SB1250 specification level: 10/21/02 - * BCM1280 specification level: 11/24/03 - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _SB1250_SMBUS_H -#define _SB1250_SMBUS_H - -#include "sb1250_defs.h" - -/* - * SMBus Clock Frequency Register (Table 14-2) - */ - -#define S_SMB_FREQ_DIV 0 -#define M_SMB_FREQ_DIV _SB_MAKEMASK(13, S_SMB_FREQ_DIV) -#define V_SMB_FREQ_DIV(x) _SB_MAKEVALUE(x, S_SMB_FREQ_DIV) - -#define K_SMB_FREQ_400KHZ 0x1F -#define K_SMB_FREQ_100KHZ 0x7D -#define K_SMB_FREQ_10KHZ 1250 - -#define S_SMB_CMD 0 -#define M_SMB_CMD _SB_MAKEMASK(8, S_SMB_CMD) -#define V_SMB_CMD(x) _SB_MAKEVALUE(x, S_SMB_CMD) - -/* - * SMBus control register (Table 14-4) - */ - -#define M_SMB_ERR_INTR _SB_MAKEMASK1(0) -#define M_SMB_FINISH_INTR _SB_MAKEMASK1(1) - -#define S_SMB_DATA_OUT 4 -#define M_SMB_DATA_OUT _SB_MAKEMASK1(S_SMB_DATA_OUT) -#define V_SMB_DATA_OUT(x) _SB_MAKEVALUE(x, S_SMB_DATA_OUT) - -#define M_SMB_DATA_DIR _SB_MAKEMASK1(5) -#define M_SMB_DATA_DIR_OUTPUT M_SMB_DATA_DIR -#define M_SMB_CLK_OUT _SB_MAKEMASK1(6) -#define M_SMB_DIRECT_ENABLE _SB_MAKEMASK1(7) - -/* - * SMBus status registers (Table 14-5) - */ - -#define M_SMB_BUSY _SB_MAKEMASK1(0) -#define M_SMB_ERROR _SB_MAKEMASK1(1) -#define M_SMB_ERROR_TYPE _SB_MAKEMASK1(2) - -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_SMB_SCL_IN 5 -#define M_SMB_SCL_IN _SB_MAKEMASK1(S_SMB_SCL_IN) -#define V_SMB_SCL_IN(x) _SB_MAKEVALUE(x, S_SMB_SCL_IN) -#define G_SMB_SCL_IN(x) _SB_GETVALUE(x, S_SMB_SCL_IN, M_SMB_SCL_IN) -#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ - -#define S_SMB_REF 6 -#define M_SMB_REF _SB_MAKEMASK1(S_SMB_REF) -#define V_SMB_REF(x) _SB_MAKEVALUE(x, S_SMB_REF) -#define G_SMB_REF(x) _SB_GETVALUE(x, S_SMB_REF, M_SMB_REF) - -#define S_SMB_DATA_IN 7 -#define M_SMB_DATA_IN _SB_MAKEMASK1(S_SMB_DATA_IN) -#define V_SMB_DATA_IN(x) _SB_MAKEVALUE(x, S_SMB_DATA_IN) -#define G_SMB_DATA_IN(x) _SB_GETVALUE(x, S_SMB_DATA_IN, M_SMB_DATA_IN) - -/* - * SMBus Start/Command registers (Table 14-9) - */ - -#define S_SMB_ADDR 0 -#define M_SMB_ADDR _SB_MAKEMASK(7, S_SMB_ADDR) -#define V_SMB_ADDR(x) _SB_MAKEVALUE(x, S_SMB_ADDR) -#define G_SMB_ADDR(x) _SB_GETVALUE(x, S_SMB_ADDR, M_SMB_ADDR) - -#define M_SMB_QDATA _SB_MAKEMASK1(7) - -#define S_SMB_TT 8 -#define M_SMB_TT _SB_MAKEMASK(3, S_SMB_TT) -#define V_SMB_TT(x) _SB_MAKEVALUE(x, S_SMB_TT) -#define G_SMB_TT(x) _SB_GETVALUE(x, S_SMB_TT, M_SMB_TT) - -#define K_SMB_TT_WR1BYTE 0 -#define K_SMB_TT_WR2BYTE 1 -#define K_SMB_TT_WR3BYTE 2 -#define K_SMB_TT_CMD_RD1BYTE 3 -#define K_SMB_TT_CMD_RD2BYTE 4 -#define K_SMB_TT_RD1BYTE 5 -#define K_SMB_TT_QUICKCMD 6 -#define K_SMB_TT_EEPROMREAD 7 - -#define V_SMB_TT_WR1BYTE V_SMB_TT(K_SMB_TT_WR1BYTE) -#define V_SMB_TT_WR2BYTE V_SMB_TT(K_SMB_TT_WR2BYTE) -#define V_SMB_TT_WR3BYTE V_SMB_TT(K_SMB_TT_WR3BYTE) -#define V_SMB_TT_CMD_RD1BYTE V_SMB_TT(K_SMB_TT_CMD_RD1BYTE) -#define V_SMB_TT_CMD_RD2BYTE V_SMB_TT(K_SMB_TT_CMD_RD2BYTE) -#define V_SMB_TT_RD1BYTE V_SMB_TT(K_SMB_TT_RD1BYTE) -#define V_SMB_TT_QUICKCMD V_SMB_TT(K_SMB_TT_QUICKCMD) -#define V_SMB_TT_EEPROMREAD V_SMB_TT(K_SMB_TT_EEPROMREAD) - -#define M_SMB_PEC _SB_MAKEMASK1(15) - -/* - * SMBus Data Register (Table 14-6) and SMBus Extra Register (Table 14-7) - */ - -#define S_SMB_LB 0 -#define M_SMB_LB _SB_MAKEMASK(8, S_SMB_LB) -#define V_SMB_LB(x) _SB_MAKEVALUE(x, S_SMB_LB) - -#define S_SMB_MB 8 -#define M_SMB_MB _SB_MAKEMASK(8, S_SMB_MB) -#define V_SMB_MB(x) _SB_MAKEVALUE(x, S_SMB_MB) - - -/* - * SMBus Packet Error Check register (Table 14-8) - */ - -#define S_SPEC_PEC 0 -#define M_SPEC_PEC _SB_MAKEMASK(8, S_SPEC_PEC) -#define V_SPEC_MB(x) _SB_MAKEVALUE(x, S_SPEC_PEC) - - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) - -#define S_SMB_CMDH 8 -#define M_SMB_CMDH _SB_MAKEMASK(8, S_SMB_CMDH) -#define V_SMB_CMDH(x) _SB_MAKEVALUE(x, S_SMB_CMDH) - -#define M_SMB_EXTEND _SB_MAKEMASK1(14) - -#define S_SMB_DFMT 8 -#define M_SMB_DFMT _SB_MAKEMASK(3, S_SMB_DFMT) -#define V_SMB_DFMT(x) _SB_MAKEVALUE(x, S_SMB_DFMT) -#define G_SMB_DFMT(x) _SB_GETVALUE(x, S_SMB_DFMT, M_SMB_DFMT) - -#define K_SMB_DFMT_1BYTE 0 -#define K_SMB_DFMT_2BYTE 1 -#define K_SMB_DFMT_3BYTE 2 -#define K_SMB_DFMT_4BYTE 3 -#define K_SMB_DFMT_NODATA 4 -#define K_SMB_DFMT_CMD4BYTE 5 -#define K_SMB_DFMT_CMD5BYTE 6 -#define K_SMB_DFMT_RESERVED 7 - -#define V_SMB_DFMT_1BYTE V_SMB_DFMT(K_SMB_DFMT_1BYTE) -#define V_SMB_DFMT_2BYTE V_SMB_DFMT(K_SMB_DFMT_2BYTE) -#define V_SMB_DFMT_3BYTE V_SMB_DFMT(K_SMB_DFMT_3BYTE) -#define V_SMB_DFMT_4BYTE V_SMB_DFMT(K_SMB_DFMT_4BYTE) -#define V_SMB_DFMT_NODATA V_SMB_DFMT(K_SMB_DFMT_NODATA) -#define V_SMB_DFMT_CMD4BYTE V_SMB_DFMT(K_SMB_DFMT_CMD4BYTE) -#define V_SMB_DFMT_CMD5BYTE V_SMB_DFMT(K_SMB_DFMT_CMD5BYTE) -#define V_SMB_DFMT_RESERVED V_SMB_DFMT(K_SMB_DFMT_RESERVED) - -#define S_SMB_AFMT 11 -#define M_SMB_AFMT _SB_MAKEMASK(2, S_SMB_AFMT) -#define V_SMB_AFMT(x) _SB_MAKEVALUE(x, S_SMB_AFMT) -#define G_SMB_AFMT(x) _SB_GETVALUE(x, S_SMB_AFMT, M_SMB_AFMT) - -#define K_SMB_AFMT_NONE 0 -#define K_SMB_AFMT_ADDR 1 -#define K_SMB_AFMT_ADDR_CMD1BYTE 2 -#define K_SMB_AFMT_ADDR_CMD2BYTE 3 - -#define V_SMB_AFMT_NONE V_SMB_AFMT(K_SMB_AFMT_NONE) -#define V_SMB_AFMT_ADDR V_SMB_AFMT(K_SMB_AFMT_ADDR) -#define V_SMB_AFMT_ADDR_CMD1BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD1BYTE) -#define V_SMB_AFMT_ADDR_CMD2BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD2BYTE) - -#define M_SMB_DIR _SB_MAKEMASK1(13) - -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - -#endif diff --git a/include/asm-mips/sibyte/sb1250_syncser.h b/include/asm-mips/sibyte/sb1250_syncser.h deleted file mode 100644 index d4b8558e0bf1..000000000000 --- a/include/asm-mips/sibyte/sb1250_syncser.h +++ /dev/null @@ -1,146 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * Synchronous Serial Constants File: sb1250_syncser.h - * - * This module contains constants and macros useful for - * manipulating the SB1250's Synchronous Serial - * - * SB1250 specification level: User's manual 1/02/02 - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _SB1250_SYNCSER_H -#define _SB1250_SYNCSER_H - -#include "sb1250_defs.h" - -/* - * Serial Mode Configuration Register - */ - -#define M_SYNCSER_CRC_MODE _SB_MAKEMASK1(0) -#define M_SYNCSER_MSB_FIRST _SB_MAKEMASK1(1) - -#define S_SYNCSER_FLAG_NUM 2 -#define M_SYNCSER_FLAG_NUM _SB_MAKEMASK(4, S_SYNCSER_FLAG_NUM) -#define V_SYNCSER_FLAG_NUM _SB_MAKEVALUE(x, S_SYNCSER_FLAG_NUM) - -#define M_SYNCSER_FLAG_EN _SB_MAKEMASK1(6) -#define M_SYNCSER_HDLC_EN _SB_MAKEMASK1(7) -#define M_SYNCSER_LOOP_MODE _SB_MAKEMASK1(8) -#define M_SYNCSER_LOOPBACK _SB_MAKEMASK1(9) - -/* - * Serial Clock Source and Line Interface Mode Register - */ - -#define M_SYNCSER_RXCLK_INV _SB_MAKEMASK1(0) -#define M_SYNCSER_RXCLK_EXT _SB_MAKEMASK1(1) - -#define S_SYNCSER_RXSYNC_DLY 2 -#define M_SYNCSER_RXSYNC_DLY _SB_MAKEMASK(2, S_SYNCSER_RXSYNC_DLY) -#define V_SYNCSER_RXSYNC_DLY(x) _SB_MAKEVALUE(x, S_SYNCSER_RXSYNC_DLY) - -#define M_SYNCSER_RXSYNC_LOW _SB_MAKEMASK1(4) -#define M_SYNCSER_RXSTRB_LOW _SB_MAKEMASK1(5) - -#define M_SYNCSER_RXSYNC_EDGE _SB_MAKEMASK1(6) -#define M_SYNCSER_RXSYNC_INT _SB_MAKEMASK1(7) - -#define M_SYNCSER_TXCLK_INV _SB_MAKEMASK1(8) -#define M_SYNCSER_TXCLK_EXT _SB_MAKEMASK1(9) - -#define S_SYNCSER_TXSYNC_DLY 10 -#define M_SYNCSER_TXSYNC_DLY _SB_MAKEMASK(2, S_SYNCSER_TXSYNC_DLY) -#define V_SYNCSER_TXSYNC_DLY(x) _SB_MAKEVALUE(x, S_SYNCSER_TXSYNC_DLY) - -#define M_SYNCSER_TXSYNC_LOW _SB_MAKEMASK1(12) -#define M_SYNCSER_TXSTRB_LOW _SB_MAKEMASK1(13) - -#define M_SYNCSER_TXSYNC_EDGE _SB_MAKEMASK1(14) -#define M_SYNCSER_TXSYNC_INT _SB_MAKEMASK1(15) - -/* - * Serial Command Register - */ - -#define M_SYNCSER_CMD_RX_EN _SB_MAKEMASK1(0) -#define M_SYNCSER_CMD_TX_EN _SB_MAKEMASK1(1) -#define M_SYNCSER_CMD_RX_RESET _SB_MAKEMASK1(2) -#define M_SYNCSER_CMD_TX_RESET _SB_MAKEMASK1(3) -#define M_SYNCSER_CMD_TX_PAUSE _SB_MAKEMASK1(5) - -/* - * Serial DMA Enable Register - */ - -#define M_SYNCSER_DMA_RX_EN _SB_MAKEMASK1(0) -#define M_SYNCSER_DMA_TX_EN _SB_MAKEMASK1(4) - -/* - * Serial Status Register - */ - -#define M_SYNCSER_RX_CRCERR _SB_MAKEMASK1(0) -#define M_SYNCSER_RX_ABORT _SB_MAKEMASK1(1) -#define M_SYNCSER_RX_OCTET _SB_MAKEMASK1(2) -#define M_SYNCSER_RX_LONGFRM _SB_MAKEMASK1(3) -#define M_SYNCSER_RX_SHORTFRM _SB_MAKEMASK1(4) -#define M_SYNCSER_RX_OVERRUN _SB_MAKEMASK1(5) -#define M_SYNCSER_RX_SYNC_ERR _SB_MAKEMASK1(6) -#define M_SYNCSER_TX_CRCERR _SB_MAKEMASK1(8) -#define M_SYNCSER_TX_UNDERRUN _SB_MAKEMASK1(9) -#define M_SYNCSER_TX_SYNC_ERR _SB_MAKEMASK1(10) -#define M_SYNCSER_TX_PAUSE_COMPLETE _SB_MAKEMASK1(11) -#define M_SYNCSER_RX_EOP_COUNT _SB_MAKEMASK1(16) -#define M_SYNCSER_RX_EOP_TIMER _SB_MAKEMASK1(17) -#define M_SYNCSER_RX_EOP_SEEN _SB_MAKEMASK1(18) -#define M_SYNCSER_RX_HWM _SB_MAKEMASK1(19) -#define M_SYNCSER_RX_LWM _SB_MAKEMASK1(20) -#define M_SYNCSER_RX_DSCR _SB_MAKEMASK1(21) -#define M_SYNCSER_RX_DERR _SB_MAKEMASK1(22) -#define M_SYNCSER_TX_EOP_COUNT _SB_MAKEMASK1(24) -#define M_SYNCSER_TX_EOP_TIMER _SB_MAKEMASK1(25) -#define M_SYNCSER_TX_EOP_SEEN _SB_MAKEMASK1(26) -#define M_SYNCSER_TX_HWM _SB_MAKEMASK1(27) -#define M_SYNCSER_TX_LWM _SB_MAKEMASK1(28) -#define M_SYNCSER_TX_DSCR _SB_MAKEMASK1(29) -#define M_SYNCSER_TX_DERR _SB_MAKEMASK1(30) -#define M_SYNCSER_TX_DZERO _SB_MAKEMASK1(31) - -/* - * Sequencer Table Entry format - */ - -#define M_SYNCSER_SEQ_LAST _SB_MAKEMASK1(0) -#define M_SYNCSER_SEQ_BYTE _SB_MAKEMASK1(1) - -#define S_SYNCSER_SEQ_COUNT 2 -#define M_SYNCSER_SEQ_COUNT _SB_MAKEMASK(4, S_SYNCSER_SEQ_COUNT) -#define V_SYNCSER_SEQ_COUNT(x) _SB_MAKEVALUE(x, S_SYNCSER_SEQ_COUNT) - -#define M_SYNCSER_SEQ_ENABLE _SB_MAKEMASK1(6) -#define M_SYNCSER_SEQ_STROBE _SB_MAKEMASK1(7) - -#endif diff --git a/include/asm-mips/sibyte/sb1250_uart.h b/include/asm-mips/sibyte/sb1250_uart.h deleted file mode 100644 index d835bf280140..000000000000 --- a/include/asm-mips/sibyte/sb1250_uart.h +++ /dev/null @@ -1,362 +0,0 @@ -/* ********************************************************************* - * SB1250 Board Support Package - * - * UART Constants File: sb1250_uart.h - * - * This module contains constants and macros useful for - * manipulating the SB1250's UARTs - * - * SB1250 specification level: User's manual 1/02/02 - * - ********************************************************************* - * - * Copyright 2000,2001,2002,2003 - * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - ********************************************************************* */ - - -#ifndef _SB1250_UART_H -#define _SB1250_UART_H - -#include "sb1250_defs.h" - -/* ********************************************************************** - * DUART Registers - ********************************************************************** */ - -/* - * DUART Mode Register #1 (Table 10-3) - * Register: DUART_MODE_REG_1_A - * Register: DUART_MODE_REG_1_B - */ - -#define S_DUART_BITS_PER_CHAR 0 -#define M_DUART_BITS_PER_CHAR _SB_MAKEMASK(2, S_DUART_BITS_PER_CHAR) -#define V_DUART_BITS_PER_CHAR(x) _SB_MAKEVALUE(x, S_DUART_BITS_PER_CHAR) - -#define K_DUART_BITS_PER_CHAR_RSV0 0 -#define K_DUART_BITS_PER_CHAR_RSV1 1 -#define K_DUART_BITS_PER_CHAR_7 2 -#define K_DUART_BITS_PER_CHAR_8 3 - -#define V_DUART_BITS_PER_CHAR_RSV0 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV0) -#define V_DUART_BITS_PER_CHAR_RSV1 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV1) -#define V_DUART_BITS_PER_CHAR_7 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_7) -#define V_DUART_BITS_PER_CHAR_8 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_8) - - -#define M_DUART_PARITY_TYPE_EVEN 0x00 -#define M_DUART_PARITY_TYPE_ODD _SB_MAKEMASK1(2) - -#define S_DUART_PARITY_MODE 3 -#define M_DUART_PARITY_MODE _SB_MAKEMASK(2, S_DUART_PARITY_MODE) -#define V_DUART_PARITY_MODE(x) _SB_MAKEVALUE(x, S_DUART_PARITY_MODE) - -#define K_DUART_PARITY_MODE_ADD 0 -#define K_DUART_PARITY_MODE_ADD_FIXED 1 -#define K_DUART_PARITY_MODE_NONE 2 - -#define V_DUART_PARITY_MODE_ADD V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD) -#define V_DUART_PARITY_MODE_ADD_FIXED V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD_FIXED) -#define V_DUART_PARITY_MODE_NONE V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_NONE) - -#define M_DUART_TX_IRQ_SEL_TXRDY 0 -#define M_DUART_TX_IRQ_SEL_TXEMPT _SB_MAKEMASK1(5) - -#define M_DUART_RX_IRQ_SEL_RXRDY 0 -#define M_DUART_RX_IRQ_SEL_RXFULL _SB_MAKEMASK1(6) - -#define M_DUART_RX_RTS_ENA _SB_MAKEMASK1(7) - -/* - * DUART Mode Register #2 (Table 10-4) - * Register: DUART_MODE_REG_2_A - * Register: DUART_MODE_REG_2_B - */ - -#define M_DUART_MODE_RESERVED1 _SB_MAKEMASK(3, 0) /* ignored */ - -#define M_DUART_STOP_BIT_LEN_2 _SB_MAKEMASK1(3) -#define M_DUART_STOP_BIT_LEN_1 0 - -#define M_DUART_TX_CTS_ENA _SB_MAKEMASK1(4) - - -#define M_DUART_MODE_RESERVED2 _SB_MAKEMASK1(5) /* must be zero */ - -#define S_DUART_CHAN_MODE 6 -#define M_DUART_CHAN_MODE _SB_MAKEMASK(2, S_DUART_CHAN_MODE) -#define V_DUART_CHAN_MODE(x) _SB_MAKEVALUE(x, S_DUART_CHAN_MODE) - -#define K_DUART_CHAN_MODE_NORMAL 0 -#define K_DUART_CHAN_MODE_LCL_LOOP 2 -#define K_DUART_CHAN_MODE_REM_LOOP 3 - -#define V_DUART_CHAN_MODE_NORMAL V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_NORMAL) -#define V_DUART_CHAN_MODE_LCL_LOOP V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_LCL_LOOP) -#define V_DUART_CHAN_MODE_REM_LOOP V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_REM_LOOP) - -/* - * DUART Command Register (Table 10-5) - * Register: DUART_CMD_A - * Register: DUART_CMD_B - */ - -#define M_DUART_RX_EN _SB_MAKEMASK1(0) -#define M_DUART_RX_DIS _SB_MAKEMASK1(1) -#define M_DUART_TX_EN _SB_MAKEMASK1(2) -#define M_DUART_TX_DIS _SB_MAKEMASK1(3) - -#define S_DUART_MISC_CMD 4 -#define M_DUART_MISC_CMD _SB_MAKEMASK(3, S_DUART_MISC_CMD) -#define V_DUART_MISC_CMD(x) _SB_MAKEVALUE(x, S_DUART_MISC_CMD) - -#define K_DUART_MISC_CMD_NOACTION0 0 -#define K_DUART_MISC_CMD_NOACTION1 1 -#define K_DUART_MISC_CMD_RESET_RX 2 -#define K_DUART_MISC_CMD_RESET_TX 3 -#define K_DUART_MISC_CMD_NOACTION4 4 -#define K_DUART_MISC_CMD_RESET_BREAK_INT 5 -#define K_DUART_MISC_CMD_START_BREAK 6 -#define K_DUART_MISC_CMD_STOP_BREAK 7 - -#define V_DUART_MISC_CMD_NOACTION0 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION0) -#define V_DUART_MISC_CMD_NOACTION1 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION1) -#define V_DUART_MISC_CMD_RESET_RX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_RX) -#define V_DUART_MISC_CMD_RESET_TX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_TX) -#define V_DUART_MISC_CMD_NOACTION4 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION4) -#define V_DUART_MISC_CMD_RESET_BREAK_INT V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_BREAK_INT) -#define V_DUART_MISC_CMD_START_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK) -#define V_DUART_MISC_CMD_STOP_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK) - -#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7) - -/* - * DUART Status Register (Table 10-6) - * Register: DUART_STATUS_A - * Register: DUART_STATUS_B - * READ-ONLY - */ - -#define M_DUART_RX_RDY _SB_MAKEMASK1(0) -#define M_DUART_RX_FFUL _SB_MAKEMASK1(1) -#define M_DUART_TX_RDY _SB_MAKEMASK1(2) -#define M_DUART_TX_EMT _SB_MAKEMASK1(3) -#define M_DUART_OVRUN_ERR _SB_MAKEMASK1(4) -#define M_DUART_PARITY_ERR _SB_MAKEMASK1(5) -#define M_DUART_FRM_ERR _SB_MAKEMASK1(6) -#define M_DUART_RCVD_BRK _SB_MAKEMASK1(7) - -/* - * DUART Baud Rate Register (Table 10-7) - * Register: DUART_CLK_SEL_A - * Register: DUART_CLK_SEL_B - */ - -#define M_DUART_CLK_COUNTER _SB_MAKEMASK(12, 0) -#define V_DUART_BAUD_RATE(x) (100000000/((x)*20)-1) - -/* - * DUART Data Registers (Table 10-8 and 10-9) - * Register: DUART_RX_HOLD_A - * Register: DUART_RX_HOLD_B - * Register: DUART_TX_HOLD_A - * Register: DUART_TX_HOLD_B - */ - -#define M_DUART_RX_DATA _SB_MAKEMASK(8, 0) -#define M_DUART_TX_DATA _SB_MAKEMASK(8, 0) - -/* - * DUART Input Port Register (Table 10-10) - * Register: DUART_IN_PORT - */ - -#define M_DUART_IN_PIN0_VAL _SB_MAKEMASK1(0) -#define M_DUART_IN_PIN1_VAL _SB_MAKEMASK1(1) -#define M_DUART_IN_PIN2_VAL _SB_MAKEMASK1(2) -#define M_DUART_IN_PIN3_VAL _SB_MAKEMASK1(3) -#define M_DUART_IN_PIN4_VAL _SB_MAKEMASK1(4) -#define M_DUART_IN_PIN5_VAL _SB_MAKEMASK1(5) -#define M_DUART_RIN0_PIN _SB_MAKEMASK1(6) -#define M_DUART_RIN1_PIN _SB_MAKEMASK1(7) - -/* - * DUART Input Port Change Status Register (Tables 10-11, 10-12, and 10-13) - * Register: DUART_INPORT_CHNG - */ - -#define S_DUART_IN_PIN_VAL 0 -#define M_DUART_IN_PIN_VAL _SB_MAKEMASK(4, S_DUART_IN_PIN_VAL) - -#define S_DUART_IN_PIN_CHNG 4 -#define M_DUART_IN_PIN_CHNG _SB_MAKEMASK(4, S_DUART_IN_PIN_CHNG) - - -/* - * DUART Output port control register (Table 10-14) - * Register: DUART_OPCR - */ - -#define M_DUART_OPCR_RESERVED0 _SB_MAKEMASK1(0) /* must be zero */ -#define M_DUART_OPC2_SEL _SB_MAKEMASK1(1) -#define M_DUART_OPCR_RESERVED1 _SB_MAKEMASK1(2) /* must be zero */ -#define M_DUART_OPC3_SEL _SB_MAKEMASK1(3) -#define M_DUART_OPCR_RESERVED2 _SB_MAKEMASK(4, 4) /* must be zero */ - -/* - * DUART Aux Control Register (Table 10-15) - * Register: DUART_AUX_CTRL - */ - -#define M_DUART_IP0_CHNG_ENA _SB_MAKEMASK1(0) -#define M_DUART_IP1_CHNG_ENA _SB_MAKEMASK1(1) -#define M_DUART_IP2_CHNG_ENA _SB_MAKEMASK1(2) -#define M_DUART_IP3_CHNG_ENA _SB_MAKEMASK1(3) -#define M_DUART_ACR_RESERVED _SB_MAKEMASK(4, 4) - -#define M_DUART_CTS_CHNG_ENA _SB_MAKEMASK1(0) -#define M_DUART_CIN_CHNG_ENA _SB_MAKEMASK1(2) - -/* - * DUART Interrupt Status Register (Table 10-16) - * Register: DUART_ISR - */ - -#define M_DUART_ISR_TX_A _SB_MAKEMASK1(0) - -#define S_DUART_ISR_RX_A 1 -#define M_DUART_ISR_RX_A _SB_MAKEMASK1(S_DUART_ISR_RX_A) -#define V_DUART_ISR_RX_A(x) _SB_MAKEVALUE(x, S_DUART_ISR_RX_A) -#define G_DUART_ISR_RX_A(x) _SB_GETVALUE(x, S_DUART_ISR_RX_A, M_DUART_ISR_RX_A) - -#define M_DUART_ISR_BRK_A _SB_MAKEMASK1(2) -#define M_DUART_ISR_IN_A _SB_MAKEMASK1(3) -#define M_DUART_ISR_ALL_A _SB_MAKEMASK(4, 0) - -#define M_DUART_ISR_TX_B _SB_MAKEMASK1(4) -#define M_DUART_ISR_RX_B _SB_MAKEMASK1(5) -#define M_DUART_ISR_BRK_B _SB_MAKEMASK1(6) -#define M_DUART_ISR_IN_B _SB_MAKEMASK1(7) -#define M_DUART_ISR_ALL_B _SB_MAKEMASK(4, 4) - -/* - * DUART Channel A Interrupt Status Register (Table 10-17) - * DUART Channel B Interrupt Status Register (Table 10-18) - * Register: DUART_ISR_A - * Register: DUART_ISR_B - */ - -#define M_DUART_ISR_TX _SB_MAKEMASK1(0) -#define M_DUART_ISR_RX _SB_MAKEMASK1(1) -#define M_DUART_ISR_BRK _SB_MAKEMASK1(2) -#define M_DUART_ISR_IN _SB_MAKEMASK1(3) -#define M_DUART_ISR_ALL _SB_MAKEMASK(4, 0) -#define M_DUART_ISR_RESERVED _SB_MAKEMASK(4, 4) - -/* - * DUART Interrupt Mask Register (Table 10-19) - * Register: DUART_IMR - */ - -#define M_DUART_IMR_TX_A _SB_MAKEMASK1(0) -#define M_DUART_IMR_RX_A _SB_MAKEMASK1(1) -#define M_DUART_IMR_BRK_A _SB_MAKEMASK1(2) -#define M_DUART_IMR_IN_A _SB_MAKEMASK1(3) -#define M_DUART_IMR_ALL_A _SB_MAKEMASK(4, 0) - -#define M_DUART_IMR_TX_B _SB_MAKEMASK1(4) -#define M_DUART_IMR_RX_B _SB_MAKEMASK1(5) -#define M_DUART_IMR_BRK_B _SB_MAKEMASK1(6) -#define M_DUART_IMR_IN_B _SB_MAKEMASK1(7) -#define M_DUART_IMR_ALL_B _SB_MAKEMASK(4, 4) - -/* - * DUART Channel A Interrupt Mask Register (Table 10-20) - * DUART Channel B Interrupt Mask Register (Table 10-21) - * Register: DUART_IMR_A - * Register: DUART_IMR_B - */ - -#define M_DUART_IMR_TX _SB_MAKEMASK1(0) -#define M_DUART_IMR_RX _SB_MAKEMASK1(1) -#define M_DUART_IMR_BRK _SB_MAKEMASK1(2) -#define M_DUART_IMR_IN _SB_MAKEMASK1(3) -#define M_DUART_IMR_ALL _SB_MAKEMASK(4, 0) -#define M_DUART_IMR_RESERVED _SB_MAKEMASK(4, 4) - - -/* - * DUART Output Port Set Register (Table 10-22) - * Register: DUART_SET_OPR - */ - -#define M_DUART_SET_OPR0 _SB_MAKEMASK1(0) -#define M_DUART_SET_OPR1 _SB_MAKEMASK1(1) -#define M_DUART_SET_OPR2 _SB_MAKEMASK1(2) -#define M_DUART_SET_OPR3 _SB_MAKEMASK1(3) -#define M_DUART_OPSR_RESERVED _SB_MAKEMASK(4, 4) - -/* - * DUART Output Port Clear Register (Table 10-23) - * Register: DUART_CLEAR_OPR - */ - -#define M_DUART_CLR_OPR0 _SB_MAKEMASK1(0) -#define M_DUART_CLR_OPR1 _SB_MAKEMASK1(1) -#define M_DUART_CLR_OPR2 _SB_MAKEMASK1(2) -#define M_DUART_CLR_OPR3 _SB_MAKEMASK1(3) -#define M_DUART_OPCR_RESERVED _SB_MAKEMASK(4, 4) - -/* - * DUART Output Port RTS Register (Table 10-24) - * Register: DUART_OUT_PORT - */ - -#define M_DUART_OUT_PIN_SET0 _SB_MAKEMASK1(0) -#define M_DUART_OUT_PIN_SET1 _SB_MAKEMASK1(1) -#define M_DUART_OUT_PIN_CLR0 _SB_MAKEMASK1(2) -#define M_DUART_OUT_PIN_CLR1 _SB_MAKEMASK1(3) -#define M_DUART_OPRR_RESERVED _SB_MAKEMASK(4, 4) - -#define M_DUART_OUT_PIN_SET(chan) \ - (chan == 0 ? M_DUART_OUT_PIN_SET0 : M_DUART_OUT_PIN_SET1) -#define M_DUART_OUT_PIN_CLR(chan) \ - (chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1) - -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -/* - * Full Interrupt Control Register - */ - -#define S_DUART_SIG_FULL _SB_MAKE64(0) -#define M_DUART_SIG_FULL _SB_MAKEMASK(4, S_DUART_SIG_FULL) -#define V_DUART_SIG_FULL(x) _SB_MAKEVALUE(x, S_DUART_SIG_FULL) -#define G_DUART_SIG_FULL(x) _SB_GETVALUE(x, S_DUART_SIG_FULL, M_DUART_SIG_FULL) - -#define S_DUART_INT_TIME _SB_MAKE64(4) -#define M_DUART_INT_TIME _SB_MAKEMASK(4, S_DUART_INT_TIME) -#define V_DUART_INT_TIME(x) _SB_MAKEVALUE(x, S_DUART_INT_TIME) -#define G_DUART_INT_TIME(x) _SB_GETVALUE(x, S_DUART_INT_TIME, M_DUART_INT_TIME) -#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ - - -/* ********************************************************************** */ - - -#endif diff --git a/include/asm-mips/sibyte/sentosa.h b/include/asm-mips/sibyte/sentosa.h deleted file mode 100644 index 64c47874f32d..000000000000 --- a/include/asm-mips/sibyte/sentosa.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ -#ifndef __ASM_SIBYTE_SENTOSA_H -#define __ASM_SIBYTE_SENTOSA_H - -#include -#include - -#ifdef CONFIG_SIBYTE_SENTOSA -#define SIBYTE_BOARD_NAME "BCM91250E (Sentosa)" -#endif -#ifdef CONFIG_SIBYTE_RHONE -#define SIBYTE_BOARD_NAME "BCM91125E (Rhone)" -#endif - -/* Generic bus chip selects */ -#ifdef CONFIG_SIBYTE_RHONE -#define LEDS_CS 6 -#define LEDS_PHYS 0x1d0a0000 -#endif - -/* GPIOs */ -#define K_GPIO_DBG_LED 0 - -#endif /* __ASM_SIBYTE_SENTOSA_H */ diff --git a/include/asm-mips/sibyte/swarm.h b/include/asm-mips/sibyte/swarm.h deleted file mode 100644 index 114d9d29ca9d..000000000000 --- a/include/asm-mips/sibyte/swarm.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ -#ifndef __ASM_SIBYTE_SWARM_H -#define __ASM_SIBYTE_SWARM_H - -#include -#include - -#ifdef CONFIG_SIBYTE_SWARM -#define SIBYTE_BOARD_NAME "BCM91250A (SWARM)" -#define SIBYTE_HAVE_PCMCIA 1 -#define SIBYTE_HAVE_IDE 1 -#endif -#ifdef CONFIG_SIBYTE_LITTLESUR -#define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)" -#define SIBYTE_HAVE_PCMCIA 0 -#define SIBYTE_HAVE_IDE 1 -#define SIBYTE_DEFAULT_CONSOLE "cfe0" -#endif -#ifdef CONFIG_SIBYTE_CRHONE -#define SIBYTE_BOARD_NAME "BCM91125C (CRhone)" -#define SIBYTE_HAVE_PCMCIA 0 -#define SIBYTE_HAVE_IDE 0 -#endif -#ifdef CONFIG_SIBYTE_CRHINE -#define SIBYTE_BOARD_NAME "BCM91120C (CRhine)" -#define SIBYTE_HAVE_PCMCIA 0 -#define SIBYTE_HAVE_IDE 0 -#endif - -/* Generic bus chip selects */ -#define LEDS_CS 3 -#define LEDS_PHYS 0x100a0000 - -#ifdef SIBYTE_HAVE_IDE -#define IDE_CS 4 -#define IDE_PHYS 0x100b0000 -#define K_GPIO_GB_IDE 4 -#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) -#endif - -#ifdef SIBYTE_HAVE_PCMCIA -#define PCMCIA_CS 6 -#define PCMCIA_PHYS 0x11000000 -#define K_GPIO_PC_READY 9 -#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY) -#endif - -#endif /* __ASM_SIBYTE_SWARM_H */ diff --git a/include/asm-mips/sigcontext.h b/include/asm-mips/sigcontext.h deleted file mode 100644 index 9ce0607d7a4e..000000000000 --- a/include/asm-mips/sigcontext.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 1997, 1999 by Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_SIGCONTEXT_H -#define _ASM_SIGCONTEXT_H - -#include - -#if _MIPS_SIM == _MIPS_SIM_ABI32 - -/* - * Keep this struct definition in sync with the sigcontext fragment - * in arch/mips/tools/offset.c - */ -struct sigcontext { - unsigned int sc_regmask; /* Unused */ - unsigned int sc_status; /* Unused */ - unsigned long long sc_pc; - unsigned long long sc_regs[32]; - unsigned long long sc_fpregs[32]; - unsigned int sc_acx; /* Was sc_ownedfp */ - unsigned int sc_fpc_csr; - unsigned int sc_fpc_eir; /* Unused */ - unsigned int sc_used_math; - unsigned int sc_dsp; /* dsp status, was sc_ssflags */ - unsigned long long sc_mdhi; - unsigned long long sc_mdlo; - unsigned long sc_hi1; /* Was sc_cause */ - unsigned long sc_lo1; /* Was sc_badvaddr */ - unsigned long sc_hi2; /* Was sc_sigset[4] */ - unsigned long sc_lo2; - unsigned long sc_hi3; - unsigned long sc_lo3; -}; - -#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ - -#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 - -#include -/* - * Keep this struct definition in sync with the sigcontext fragment - * in arch/mips/tools/offset.c - * - * Warning: this structure illdefined with sc_badvaddr being just an unsigned - * int so it was changed to unsigned long in 2.6.0-test1. This may break - * binary compatibility - no prisoners. - * DSP ASE in 2.6.12-rc4. Turn sc_mdhi and sc_mdlo into an array of four - * entries, add sc_dsp and sc_reserved for padding. No prisoners. - */ -struct sigcontext { - __u64 sc_regs[32]; - __u64 sc_fpregs[32]; - __u64 sc_mdhi; - __u64 sc_hi1; - __u64 sc_hi2; - __u64 sc_hi3; - __u64 sc_mdlo; - __u64 sc_lo1; - __u64 sc_lo2; - __u64 sc_lo3; - __u64 sc_pc; - __u32 sc_fpc_csr; - __u32 sc_used_math; - __u32 sc_dsp; - __u32 sc_reserved; -}; - -#ifdef __KERNEL__ - -struct sigcontext32 { - __u32 sc_regmask; /* Unused */ - __u32 sc_status; /* Unused */ - __u64 sc_pc; - __u64 sc_regs[32]; - __u64 sc_fpregs[32]; - __u32 sc_acx; /* Only MIPS32; was sc_ownedfp */ - __u32 sc_fpc_csr; - __u32 sc_fpc_eir; /* Unused */ - __u32 sc_used_math; - __u32 sc_dsp; /* dsp status, was sc_ssflags */ - __u64 sc_mdhi; - __u64 sc_mdlo; - __u32 sc_hi1; /* Was sc_cause */ - __u32 sc_lo1; /* Was sc_badvaddr */ - __u32 sc_hi2; /* Was sc_sigset[4] */ - __u32 sc_lo2; - __u32 sc_hi3; - __u32 sc_lo3; -}; -#endif /* __KERNEL__ */ - -#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */ - -#endif /* _ASM_SIGCONTEXT_H */ diff --git a/include/asm-mips/siginfo.h b/include/asm-mips/siginfo.h deleted file mode 100644 index 96e28f18dad1..000000000000 --- a/include/asm-mips/siginfo.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 1999, 2001, 2003 Ralf Baechle - * Copyright (C) 2000, 2001 Silicon Graphics, Inc. - */ -#ifndef _ASM_SIGINFO_H -#define _ASM_SIGINFO_H - - -#define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(long) + 2*sizeof(int)) -#undef __ARCH_SI_TRAPNO /* exception code needs to fill this ... */ - -#define HAVE_ARCH_SIGINFO_T - -/* - * We duplicate the generic versions - is just borked - * by design ... - */ -#define HAVE_ARCH_COPY_SIGINFO -struct siginfo; - -/* - * Careful to keep union _sifields from shifting ... - */ -#ifdef CONFIG_32BIT -#define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int)) -#endif -#ifdef CONFIG_64BIT -#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) -#endif - -#include - -typedef struct siginfo { - int si_signo; - int si_code; - int si_errno; - int __pad0[SI_MAX_SIZE / sizeof(int) - SI_PAD_SIZE - 3]; - - union { - int _pad[SI_PAD_SIZE]; - - /* kill() */ - struct { - pid_t _pid; /* sender's pid */ - __ARCH_SI_UID_T _uid; /* sender's uid */ - } _kill; - - /* POSIX.1b timers */ - struct { - timer_t _tid; /* timer id */ - int _overrun; /* overrun count */ - char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)]; - sigval_t _sigval; /* same as below */ - int _sys_private; /* not to be passed to user */ - } _timer; - - /* POSIX.1b signals */ - struct { - pid_t _pid; /* sender's pid */ - __ARCH_SI_UID_T _uid; /* sender's uid */ - sigval_t _sigval; - } _rt; - - /* SIGCHLD */ - struct { - pid_t _pid; /* which child */ - __ARCH_SI_UID_T _uid; /* sender's uid */ - int _status; /* exit code */ - clock_t _utime; - clock_t _stime; - } _sigchld; - - /* IRIX SIGCHLD */ - struct { - pid_t _pid; /* which child */ - clock_t _utime; - int _status; /* exit code */ - clock_t _stime; - } _irix_sigchld; - - /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ - struct { - void __user *_addr; /* faulting insn/memory ref. */ -#ifdef __ARCH_SI_TRAPNO - int _trapno; /* TRAP # which caused the signal */ -#endif - } _sigfault; - - /* SIGPOLL, SIGXFSZ (To do ...) */ - struct { - __ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */ - int _fd; - } _sigpoll; - } _sifields; -} siginfo_t; - -/* - * si_code values - * Again these have been choosen to be IRIX compatible. - */ -#undef SI_ASYNCIO -#undef SI_TIMER -#undef SI_MESGQ -#define SI_ASYNCIO -2 /* sent by AIO completion */ -#define SI_TIMER __SI_CODE(__SI_TIMER, -3) /* sent by timer expiration */ -#define SI_MESGQ __SI_CODE(__SI_MESGQ, -4) /* sent by real time mesq state change */ - -#ifdef __KERNEL__ - -/* - * Duplicated here because of braindamage ... - */ -#include - -static inline void copy_siginfo(struct siginfo *to, struct siginfo *from) -{ - if (from->si_code < 0) - memcpy(to, from, sizeof(*to)); - else - /* _sigchld is currently the largest know union member */ - memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld)); -} - -#endif - -#endif /* _ASM_SIGINFO_H */ diff --git a/include/asm-mips/signal.h b/include/asm-mips/signal.h deleted file mode 100644 index bee5153aca48..000000000000 --- a/include/asm-mips/signal.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 96, 97, 98, 99, 2003 by Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_SIGNAL_H -#define _ASM_SIGNAL_H - -#include - -#define _NSIG 128 -#define _NSIG_BPW (sizeof(unsigned long) * 8) -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -#define SIGHUP 1 /* Hangup (POSIX). */ -#define SIGINT 2 /* Interrupt (ANSI). */ -#define SIGQUIT 3 /* Quit (POSIX). */ -#define SIGILL 4 /* Illegal instruction (ANSI). */ -#define SIGTRAP 5 /* Trace trap (POSIX). */ -#define SIGIOT 6 /* IOT trap (4.2 BSD). */ -#define SIGABRT SIGIOT /* Abort (ANSI). */ -#define SIGEMT 7 -#define SIGFPE 8 /* Floating-point exception (ANSI). */ -#define SIGKILL 9 /* Kill, unblockable (POSIX). */ -#define SIGBUS 10 /* BUS error (4.2 BSD). */ -#define SIGSEGV 11 /* Segmentation violation (ANSI). */ -#define SIGSYS 12 -#define SIGPIPE 13 /* Broken pipe (POSIX). */ -#define SIGALRM 14 /* Alarm clock (POSIX). */ -#define SIGTERM 15 /* Termination (ANSI). */ -#define SIGUSR1 16 /* User-defined signal 1 (POSIX). */ -#define SIGUSR2 17 /* User-defined signal 2 (POSIX). */ -#define SIGCHLD 18 /* Child status has changed (POSIX). */ -#define SIGCLD SIGCHLD /* Same as SIGCHLD (System V). */ -#define SIGPWR 19 /* Power failure restart (System V). */ -#define SIGWINCH 20 /* Window size change (4.3 BSD, Sun). */ -#define SIGURG 21 /* Urgent condition on socket (4.2 BSD). */ -#define SIGIO 22 /* I/O now possible (4.2 BSD). */ -#define SIGPOLL SIGIO /* Pollable event occurred (System V). */ -#define SIGSTOP 23 /* Stop, unblockable (POSIX). */ -#define SIGTSTP 24 /* Keyboard stop (POSIX). */ -#define SIGCONT 25 /* Continue (POSIX). */ -#define SIGTTIN 26 /* Background read from tty (POSIX). */ -#define SIGTTOU 27 /* Background write to tty (POSIX). */ -#define SIGVTALRM 28 /* Virtual alarm clock (4.2 BSD). */ -#define SIGPROF 29 /* Profiling alarm clock (4.2 BSD). */ -#define SIGXCPU 30 /* CPU limit exceeded (4.2 BSD). */ -#define SIGXFSZ 31 /* File size limit exceeded (4.2 BSD). */ - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_ONSTACK 0x08000000 -#define SA_RESETHAND 0x80000000 -#define SA_RESTART 0x10000000 -#define SA_SIGINFO 0x00000008 -#define SA_NODEFER 0x40000000 -#define SA_NOCLDWAIT 0x00010000 -#define SA_NOCLDSTOP 0x00000001 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 /* Only for o32 */ - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#ifdef __KERNEL__ - -#ifdef CONFIG_TRAD_SIGNALS -#define sig_uses_siginfo(ka) ((ka)->sa.sa_flags & SA_SIGINFO) -#else -#define sig_uses_siginfo(ka) (1) -#endif - -#endif /* __KERNEL__ */ - -#define SIG_BLOCK 1 /* for blocking signals */ -#define SIG_UNBLOCK 2 /* for unblocking signals */ -#define SIG_SETMASK 3 /* for setting the signal mask */ - -#include - -struct sigaction { - unsigned int sa_flags; - __sighandler_t sa_handler; - sigset_t sa_mask; -}; - -struct k_sigaction { - struct sigaction sa; -}; - -/* IRIX compatible stack_t */ -typedef struct sigaltstack { - void __user *ss_sp; - size_t ss_size; - int ss_flags; -} stack_t; - -#ifdef __KERNEL__ -#include -#include - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_SIGNAL_H */ diff --git a/include/asm-mips/sim.h b/include/asm-mips/sim.h deleted file mode 100644 index 0cd719fabb51..000000000000 --- a/include/asm-mips/sim.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999, 2000, 2003 Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_SIM_H -#define _ASM_SIM_H - - -#include - -#define __str2(x) #x -#define __str(x) __str2(x) - -#ifdef CONFIG_32BIT - -#define save_static_function(symbol) \ -__asm__( \ - ".text\n\t" \ - ".globl\t" #symbol "\n\t" \ - ".align\t2\n\t" \ - ".type\t" #symbol ", @function\n\t" \ - ".ent\t" #symbol ", 0\n" \ - #symbol":\n\t" \ - ".frame\t$29, 0, $31\n\t" \ - "sw\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t" \ - "sw\t$17,"__str(PT_R17)"($29)\n\t" \ - "sw\t$18,"__str(PT_R18)"($29)\n\t" \ - "sw\t$19,"__str(PT_R19)"($29)\n\t" \ - "sw\t$20,"__str(PT_R20)"($29)\n\t" \ - "sw\t$21,"__str(PT_R21)"($29)\n\t" \ - "sw\t$22,"__str(PT_R22)"($29)\n\t" \ - "sw\t$23,"__str(PT_R23)"($29)\n\t" \ - "sw\t$30,"__str(PT_R30)"($29)\n\t" \ - "j\t_" #symbol "\n\t" \ - ".end\t" #symbol "\n\t" \ - ".size\t" #symbol",. - " #symbol) - -#define nabi_no_regargs - -#endif /* CONFIG_32BIT */ - -#ifdef CONFIG_64BIT - -#define save_static_function(symbol) \ -__asm__( \ - ".text\n\t" \ - ".globl\t" #symbol "\n\t" \ - ".align\t2\n\t" \ - ".type\t" #symbol ", @function\n\t" \ - ".ent\t" #symbol ", 0\n" \ - #symbol":\n\t" \ - ".frame\t$29, 0, $31\n\t" \ - "sd\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t" \ - "sd\t$17,"__str(PT_R17)"($29)\n\t" \ - "sd\t$18,"__str(PT_R18)"($29)\n\t" \ - "sd\t$19,"__str(PT_R19)"($29)\n\t" \ - "sd\t$20,"__str(PT_R20)"($29)\n\t" \ - "sd\t$21,"__str(PT_R21)"($29)\n\t" \ - "sd\t$22,"__str(PT_R22)"($29)\n\t" \ - "sd\t$23,"__str(PT_R23)"($29)\n\t" \ - "sd\t$30,"__str(PT_R30)"($29)\n\t" \ - "j\t_" #symbol "\n\t" \ - ".end\t" #symbol "\n\t" \ - ".size\t" #symbol",. - " #symbol) - -#define nabi_no_regargs \ - unsigned long __dummy0, \ - unsigned long __dummy1, \ - unsigned long __dummy2, \ - unsigned long __dummy3, \ - unsigned long __dummy4, \ - unsigned long __dummy5, \ - unsigned long __dummy6, \ - unsigned long __dummy7, - -#endif /* CONFIG_64BIT */ - -#endif /* _ASM_SIM_H */ diff --git a/include/asm-mips/smp-ops.h b/include/asm-mips/smp-ops.h deleted file mode 100644 index 43c207e72a63..000000000000 --- a/include/asm-mips/smp-ops.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - * - * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com) - * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc. - * Copyright (C) 2000, 2001, 2002 Ralf Baechle - * Copyright (C) 2000, 2001 Broadcom Corporation - */ -#ifndef __ASM_SMP_OPS_H -#define __ASM_SMP_OPS_H - -#ifdef CONFIG_SMP - -#include - -struct plat_smp_ops { - void (*send_ipi_single)(int cpu, unsigned int action); - void (*send_ipi_mask)(cpumask_t mask, unsigned int action); - void (*init_secondary)(void); - void (*smp_finish)(void); - void (*cpus_done)(void); - void (*boot_secondary)(int cpu, struct task_struct *idle); - void (*smp_setup)(void); - void (*prepare_cpus)(unsigned int max_cpus); -}; - -extern void register_smp_ops(struct plat_smp_ops *ops); - -static inline void plat_smp_setup(void) -{ - extern struct plat_smp_ops *mp_ops; /* private */ - - mp_ops->smp_setup(); -} - -#else /* !CONFIG_SMP */ - -struct plat_smp_ops; - -static inline void plat_smp_setup(void) -{ - /* UP, nothing to do ... */ -} - -static inline void register_smp_ops(struct plat_smp_ops *ops) -{ -} - -#endif /* !CONFIG_SMP */ - -extern struct plat_smp_ops up_smp_ops; -extern struct plat_smp_ops cmp_smp_ops; -extern struct plat_smp_ops vsmp_smp_ops; - -#endif /* __ASM_SMP_OPS_H */ diff --git a/include/asm-mips/smp.h b/include/asm-mips/smp.h deleted file mode 100644 index 0ff5b523ea77..000000000000 --- a/include/asm-mips/smp.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - * - * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com) - * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc. - * Copyright (C) 2000, 2001, 2002 Ralf Baechle - * Copyright (C) 2000, 2001 Broadcom Corporation - */ -#ifndef __ASM_SMP_H -#define __ASM_SMP_H - -#include -#include -#include -#include - -#include -#include - -extern int smp_num_siblings; -extern cpumask_t cpu_sibling_map[]; - -#define raw_smp_processor_id() (current_thread_info()->cpu) - -/* Map from cpu id to sequential logical cpu number. This will only - not be idempotent when cpus failed to come on-line. */ -extern int __cpu_number_map[NR_CPUS]; -#define cpu_number_map(cpu) __cpu_number_map[cpu] - -/* The reverse map from sequential logical cpu number to cpu id. */ -extern int __cpu_logical_map[NR_CPUS]; -#define cpu_logical_map(cpu) __cpu_logical_map[cpu] - -#define NO_PROC_ID (-1) - -#define SMP_RESCHEDULE_YOURSELF 0x1 /* XXX braindead */ -#define SMP_CALL_FUNCTION 0x2 - -extern cpumask_t phys_cpu_present_map; -#define cpu_possible_map phys_cpu_present_map - -extern void asmlinkage smp_bootstrap(void); - -/* - * this function sends a 'reschedule' IPI to another CPU. - * it goes straight through and wastes no time serializing - * anything. Worst case is that we lose a reschedule ... - */ -static inline void smp_send_reschedule(int cpu) -{ - extern struct plat_smp_ops *mp_ops; /* private */ - - mp_ops->send_ipi_single(cpu, SMP_RESCHEDULE_YOURSELF); -} - -extern asmlinkage void smp_call_function_interrupt(void); - -extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); - -#endif /* __ASM_SMP_H */ diff --git a/include/asm-mips/smtc.h b/include/asm-mips/smtc.h deleted file mode 100644 index ea60bf08dcb0..000000000000 --- a/include/asm-mips/smtc.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef _ASM_SMTC_MT_H -#define _ASM_SMTC_MT_H - -/* - * Definitions for SMTC multitasking on MIPS MT cores - */ - -#include -#include - -/* - * System-wide SMTC status information - */ - -extern unsigned int smtc_status; - -#define SMTC_TLB_SHARED 0x00000001 -#define SMTC_MTC_ACTIVE 0x00000002 - -/* - * TLB/ASID Management information - */ - -#define MAX_SMTC_TLBS 2 -#define MAX_SMTC_ASIDS 256 -#if NR_CPUS <= 8 -typedef char asiduse; -#else -#if NR_CPUS <= 16 -typedef short asiduse; -#else -typedef long asiduse; -#endif -#endif - -extern asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; - -struct mm_struct; -struct task_struct; - -void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu); -void self_ipi(struct smtc_ipi *); -void smtc_flush_tlb_asid(unsigned long asid); -extern int smtc_build_cpu_map(int startslot); -extern void smtc_prepare_cpus(int cpus); -extern void smtc_smp_finish(void); -extern void smtc_boot_secondary(int cpu, struct task_struct *t); -extern void smtc_cpus_done(void); - - -/* - * Sharing the TLB between multiple VPEs means that the - * "random" index selection function is not allowed to - * select the current value of the Index register. To - * avoid additional TLB pressure, the Index registers - * are "parked" with an non-Valid value. - */ - -#define PARKED_INDEX ((unsigned int)0x80000000) - -/* - * Define low-level interrupt mask for IPIs, if necessary. - * By default, use SW interrupt 1, which requires no external - * hardware support, but which works only for single-core - * MIPS MT systems. - */ -#ifndef MIPS_CPU_IPI_IRQ -#define MIPS_CPU_IPI_IRQ 1 -#endif - -#endif /* _ASM_SMTC_MT_H */ diff --git a/include/asm-mips/smtc_ipi.h b/include/asm-mips/smtc_ipi.h deleted file mode 100644 index 8ce517574340..000000000000 --- a/include/asm-mips/smtc_ipi.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Definitions used in MIPS MT SMTC "Interprocessor Interrupt" code. - */ -#ifndef __ASM_SMTC_IPI_H -#define __ASM_SMTC_IPI_H - -#include - -//#define SMTC_IPI_DEBUG - -#ifdef SMTC_IPI_DEBUG -#include -#include -#endif /* SMTC_IPI_DEBUG */ - -/* - * An IPI "message" - */ - -struct smtc_ipi { - struct smtc_ipi *flink; - int type; - void *arg; - int dest; -#ifdef SMTC_IPI_DEBUG - int sender; - long stamp; -#endif /* SMTC_IPI_DEBUG */ -}; - -/* - * Defined IPI Types - */ - -#define LINUX_SMP_IPI 1 -#define SMTC_CLOCK_TICK 2 -#define IRQ_AFFINITY_IPI 3 - -/* - * A queue of IPI messages - */ - -struct smtc_ipi_q { - struct smtc_ipi *head; - spinlock_t lock; - struct smtc_ipi *tail; - int depth; -}; - -static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p) -{ - unsigned long flags; - - spin_lock_irqsave(&q->lock, flags); - if (q->head == NULL) - q->head = q->tail = p; - else - q->tail->flink = p; - p->flink = NULL; - q->tail = p; - q->depth++; -#ifdef SMTC_IPI_DEBUG - p->sender = read_c0_tcbind(); - p->stamp = read_c0_count(); -#endif /* SMTC_IPI_DEBUG */ - spin_unlock_irqrestore(&q->lock, flags); -} - -static inline struct smtc_ipi *__smtc_ipi_dq(struct smtc_ipi_q *q) -{ - struct smtc_ipi *p; - - if (q->head == NULL) - p = NULL; - else { - p = q->head; - q->head = q->head->flink; - q->depth--; - /* Arguably unnecessary, but leaves queue cleaner */ - if (q->head == NULL) - q->tail = NULL; - } - - return p; -} - -static inline struct smtc_ipi *smtc_ipi_dq(struct smtc_ipi_q *q) -{ - unsigned long flags; - struct smtc_ipi *p; - - spin_lock_irqsave(&q->lock, flags); - p = __smtc_ipi_dq(q); - spin_unlock_irqrestore(&q->lock, flags); - - return p; -} - -static inline void smtc_ipi_req(struct smtc_ipi_q *q, struct smtc_ipi *p) -{ - unsigned long flags; - - spin_lock_irqsave(&q->lock, flags); - if (q->head == NULL) { - q->head = q->tail = p; - p->flink = NULL; - } else { - p->flink = q->head; - q->head = p; - } - q->depth++; - spin_unlock_irqrestore(&q->lock, flags); -} - -static inline int smtc_ipi_qdepth(struct smtc_ipi_q *q) -{ - unsigned long flags; - int retval; - - spin_lock_irqsave(&q->lock, flags); - retval = q->depth; - spin_unlock_irqrestore(&q->lock, flags); - return retval; -} - -extern void smtc_send_ipi(int cpu, int type, unsigned int action); - -#endif /* __ASM_SMTC_IPI_H */ diff --git a/include/asm-mips/smtc_proc.h b/include/asm-mips/smtc_proc.h deleted file mode 100644 index 25da651f1f5f..000000000000 --- a/include/asm-mips/smtc_proc.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Definitions for SMTC /proc entries - * Copyright(C) 2005 MIPS Technologies Inc. - */ -#ifndef __ASM_SMTC_PROC_H -#define __ASM_SMTC_PROC_H - -/* - * per-"CPU" statistics - */ - -struct smtc_cpu_proc { - unsigned long timerints; - unsigned long selfipis; -}; - -extern struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS]; - -/* Count of number of recoveries of "stolen" FPU access rights on 34K */ - -extern atomic_t smtc_fpu_recoveries; - -#endif /* __ASM_SMTC_PROC_H */ diff --git a/include/asm-mips/smvp.h b/include/asm-mips/smvp.h deleted file mode 100644 index 0d0e80a39e8a..000000000000 --- a/include/asm-mips/smvp.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_SMVP_H -#define _ASM_SMVP_H - -/* - * Definitions for SMVP multitasking on MIPS MT cores - */ -struct task_struct; - -extern void smvp_smp_setup(void); -extern void smvp_smp_finish(void); -extern void smvp_boot_secondary(int cpu, struct task_struct *t); -extern void smvp_init_secondary(void); -extern void smvp_smp_finish(void); -extern void smvp_cpus_done(void); -extern void smvp_prepare_cpus(unsigned int max_cpus); - -/* This is platform specific */ -extern void smvp_send_ipi(int cpu, unsigned int action); -#endif /* _ASM_SMVP_H */ diff --git a/include/asm-mips/sn/addrs.h b/include/asm-mips/sn/addrs.h deleted file mode 100644 index fec9bdd34913..000000000000 --- a/include/asm-mips/sn/addrs.h +++ /dev/null @@ -1,430 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. - * Copyright (C) 1999, 2000 by Ralf Baechle - */ -#ifndef _ASM_SN_ADDRS_H -#define _ASM_SN_ADDRS_H - - -#ifndef __ASSEMBLY__ -#include -#endif /* !__ASSEMBLY__ */ - -#include -#include - -#if defined(CONFIG_SGI_IP27) -#include -#elif defined(CONFIG_SGI_IP35) -#include -#endif - - -#ifndef __ASSEMBLY__ - -#define PS_UINT_CAST (unsigned long) -#define UINT64_CAST (unsigned long) - -#define HUBREG_CAST (volatile hubreg_t *) - -#else /* __ASSEMBLY__ */ - -#define PS_UINT_CAST -#define UINT64_CAST -#define HUBREG_CAST - -#endif /* __ASSEMBLY__ */ - - -#define NASID_GET_META(_n) ((_n) >> NASID_LOCAL_BITS) -#ifdef CONFIG_SGI_IP27 -#define NASID_GET_LOCAL(_n) ((_n) & 0xf) -#endif -#define NASID_MAKE(_m, _l) (((_m) << NASID_LOCAL_BITS) | (_l)) - -#define NODE_ADDRSPACE_MASK (NODE_ADDRSPACE_SIZE - 1) -#define TO_NODE_ADDRSPACE(_pa) (UINT64_CAST (_pa) & NODE_ADDRSPACE_MASK) - -#define CHANGE_ADDR_NASID(_pa, _nasid) \ - ((UINT64_CAST(_pa) & ~NASID_MASK) | \ - (UINT64_CAST(_nasid) << NASID_SHFT)) - - -/* - * The following macros are used to index to the beginning of a specific - * node's address space. - */ - -#define NODE_OFFSET(_n) (UINT64_CAST (_n) << NODE_SIZE_BITS) - -#define NODE_CAC_BASE(_n) (CAC_BASE + NODE_OFFSET(_n)) -#define NODE_HSPEC_BASE(_n) (HSPEC_BASE + NODE_OFFSET(_n)) -#define NODE_IO_BASE(_n) (IO_BASE + NODE_OFFSET(_n)) -#define NODE_MSPEC_BASE(_n) (MSPEC_BASE + NODE_OFFSET(_n)) -#define NODE_UNCAC_BASE(_n) (UNCAC_BASE + NODE_OFFSET(_n)) - -#define TO_NODE(_n, _x) (NODE_OFFSET(_n) | ((_x) )) -#define TO_NODE_CAC(_n, _x) (NODE_CAC_BASE(_n) | ((_x) & TO_PHYS_MASK)) -#define TO_NODE_UNCAC(_n, _x) (NODE_UNCAC_BASE(_n) | ((_x) & TO_PHYS_MASK)) -#define TO_NODE_MSPEC(_n, _x) (NODE_MSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK)) -#define TO_NODE_HSPEC(_n, _x) (NODE_HSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK)) - - -#define RAW_NODE_SWIN_BASE(nasid, widget) \ - (NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS)) - -#define WIDGETID_GET(addr) ((unsigned char)((addr >> SWIN_SIZE_BITS) & 0xff)) - -/* - * The following definitions pertain to the IO special address - * space. They define the location of the big and little windows - * of any given node. - */ - -#define SWIN_SIZE_BITS 24 -#define SWIN_SIZE (UINT64_CAST 1 << 24) -#define SWIN_SIZEMASK (SWIN_SIZE - 1) -#define SWIN_WIDGET_MASK 0xF - -/* - * Convert smallwindow address to xtalk address. - * - * 'addr' can be physical or virtual address, but will be converted - * to Xtalk address in the range 0 -> SWINZ_SIZEMASK - */ -#define SWIN_WIDGETADDR(addr) ((addr) & SWIN_SIZEMASK) -#define SWIN_WIDGETNUM(addr) (((addr) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK) -/* - * Verify if addr belongs to small window address on node with "nasid" - * - * - * NOTE: "addr" is expected to be XKPHYS address, and NOT physical - * address - * - * - */ -#define NODE_SWIN_ADDR(nasid, addr) \ - (((addr) >= NODE_SWIN_BASE(nasid, 0)) && \ - ((addr) < (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\ - )) - -/* - * The following define the major position-independent aliases used - * in SN. - * UALIAS -- 256MB in size, reads in the UALIAS result in - * uncached references to the memory of the reader's node. - * CPU_UALIAS -- 128kb in size, the bottom part of UALIAS is flipped - * depending on which CPU does the access to provide - * all CPUs with unique uncached memory at low addresses. - * LBOOT -- 256MB in size, reads in the LBOOT area result in - * uncached references to the local hub's boot prom and - * other directory-bus connected devices. - * IALIAS -- 8MB in size, reads in the IALIAS result in uncached - * references to the local hub's registers. - */ - -#define UALIAS_BASE HSPEC_BASE -#define UALIAS_SIZE 0x10000000 /* 256 Megabytes */ -#define UALIAS_LIMIT (UALIAS_BASE + UALIAS_SIZE) - -/* - * The bottom of ualias space is flipped depending on whether you're - * processor 0 or 1 within a node. - */ -#ifdef CONFIG_SGI_IP27 -#define UALIAS_FLIP_BASE UALIAS_BASE -#define UALIAS_FLIP_SIZE 0x20000 -#define UALIAS_FLIP_BIT 0x10000 -#define UALIAS_FLIP_ADDR(_x) (cputoslice(smp_processor_id()) ? \ - (_x) ^ UALIAS_FLIP_BIT : (_x)) - -#define LBOOT_BASE (HSPEC_BASE + 0x10000000) -#define LBOOT_SIZE 0x10000000 -#define LBOOT_LIMIT (LBOOT_BASE + LBOOT_SIZE) -#define LBOOT_STRIDE 0 /* IP27 has only one CPU PROM */ - -#endif - -#define HUB_REGISTER_WIDGET 1 -#define IALIAS_BASE NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET) -#define IALIAS_SIZE 0x800000 /* 8 Megabytes */ -#define IS_IALIAS(_a) (((_a) >= IALIAS_BASE) && \ - ((_a) < (IALIAS_BASE + IALIAS_SIZE))) - -/* - * Macro for referring to Hub's RBOOT space - */ - -#ifdef CONFIG_SGI_IP27 -#define RBOOT_SIZE 0x10000000 /* 256 Megabytes */ -#define NODE_RBOOT_BASE(_n) (NODE_HSPEC_BASE(_n) + 0x30000000) -#define NODE_RBOOT_LIMIT(_n) (NODE_RBOOT_BASE(_n) + RBOOT_SIZE) - -#endif - -/* - * Macros for referring the Hub's back door space - * - * These macros correctly process addresses in any node's space. - * WARNING: They won't work in assembler. - * - * BDDIR_ENTRY_LO returns the address of the low double-word of the dir - * entry corresponding to a physical (Cac or Uncac) address. - * BDDIR_ENTRY_HI returns the address of the high double-word of the entry. - * BDPRT_ENTRY returns the address of the double-word protection entry - * corresponding to the page containing the physical address. - * BDPRT_ENTRY_S Stores the value into the protection entry. - * BDPRT_ENTRY_L Load the value from the protection entry. - * BDECC_ENTRY returns the address of the ECC byte corresponding to a - * double-word at a specified physical address. - * BDECC_ENTRY_H returns the address of the two ECC bytes corresponding to a - * quad-word at a specified physical address. - */ -#define NODE_BDOOR_BASE(_n) (NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2)) - -#define NODE_BDECC_BASE(_n) (NODE_BDOOR_BASE(_n)) -#define NODE_BDDIR_BASE(_n) (NODE_BDOOR_BASE(_n) + (NODE_ADDRSPACE_SIZE/4)) -#ifdef CONFIG_SGI_IP27 -#define BDDIR_ENTRY_LO(_pa) ((HSPEC_BASE + \ - NODE_ADDRSPACE_SIZE * 3 / 4 + \ - 0x200) | \ - UINT64_CAST(_pa) & NASID_MASK | \ - UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \ - UINT64_CAST(_pa) >> 3 & 0x1f << 4) - -#define BDDIR_ENTRY_HI(_pa) ((HSPEC_BASE + \ - NODE_ADDRSPACE_SIZE * 3 / 4 + \ - 0x208) | \ - UINT64_CAST(_pa) & NASID_MASK | \ - UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \ - UINT64_CAST(_pa) >> 3 & 0x1f << 4) - -#define BDPRT_ENTRY(_pa, _rgn) ((HSPEC_BASE + \ - NODE_ADDRSPACE_SIZE * 3 / 4) | \ - UINT64_CAST(_pa) & NASID_MASK | \ - UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \ - (_rgn) << 3) -#define BDPRT_ENTRY_ADDR(_pa, _rgn) (BDPRT_ENTRY((_pa), (_rgn))) -#define BDPRT_ENTRY_S(_pa, _rgn, _val) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn))=(_val)) -#define BDPRT_ENTRY_L(_pa, _rgn) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn))) - -#define BDECC_ENTRY(_pa) ((HSPEC_BASE + \ - NODE_ADDRSPACE_SIZE / 2) | \ - UINT64_CAST(_pa) & NASID_MASK | \ - UINT64_CAST(_pa) >> 2 & BDECC_UPPER_MASK | \ - UINT64_CAST(_pa) >> 3 & 3) - -/* - * Macro to convert a back door directory or protection address into the - * raw physical address of the associated cache line or protection page. - */ -#define BDADDR_IS_DIR(_ba) ((UINT64_CAST (_ba) & 0x200) != 0) -#define BDADDR_IS_PRT(_ba) ((UINT64_CAST (_ba) & 0x200) == 0) - -#define BDDIR_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ - (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2 | \ - (UINT64_CAST(_ba) & 0x1f << 4) << 3) - -#define BDPRT_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ - (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2) - -#define BDECC_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ - (UINT64_CAST(_ba) & BDECC_UPPER_MASK)<<2 | \ - (UINT64_CAST(_ba) & 3) << 3) -#endif /* CONFIG_SGI_IP27 */ - - -/* - * The following macros produce the correct base virtual address for - * the hub registers. The LOCAL_HUB_* macros produce the appropriate - * address for the local registers. The REMOTE_HUB_* macro produce - * the address for the specified hub's registers. The intent is - * that the appropriate PI, MD, NI, or II register would be substituted - * for _x. - */ - -/* - * WARNING: - * When certain Hub chip workaround are defined, it's not sufficient - * to dereference the *_HUB_ADDR() macros. You should instead use - * HUB_L() and HUB_S() if you must deal with pointers to hub registers. - * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S(). - * They're always safe. - */ -#define LOCAL_HUB_ADDR(_x) (HUBREG_CAST (IALIAS_BASE + (_x))) -#define REMOTE_HUB_ADDR(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ - 0x800000 + (_x))) -#ifdef CONFIG_SGI_IP27 -#define REMOTE_HUB_PI_ADDR(_n, _sn, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ - 0x800000 + (_x))) -#endif /* CONFIG_SGI_IP27 */ - -#ifndef __ASSEMBLY__ - -#define HUB_L(_a) *(_a) -#define HUB_S(_a, _d) *(_a) = (_d) - -#define LOCAL_HUB_L(_r) HUB_L(LOCAL_HUB_ADDR(_r)) -#define LOCAL_HUB_S(_r, _d) HUB_S(LOCAL_HUB_ADDR(_r), (_d)) -#define REMOTE_HUB_L(_n, _r) HUB_L(REMOTE_HUB_ADDR((_n), (_r))) -#define REMOTE_HUB_S(_n, _r, _d) HUB_S(REMOTE_HUB_ADDR((_n), (_r)), (_d)) -#define REMOTE_HUB_PI_L(_n, _sn, _r) HUB_L(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r))) -#define REMOTE_HUB_PI_S(_n, _sn, _r, _d) HUB_S(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)), (_d)) - -#endif /* !__ASSEMBLY__ */ - -/* - * The following macros are used to get to a hub/bridge register, given - * the base of the register space. - */ -#define HUB_REG_PTR(_base, _off) \ - (HUBREG_CAST((__psunsigned_t)(_base) + (__psunsigned_t)(_off))) - -#define HUB_REG_PTR_L(_base, _off) \ - HUB_L(HUB_REG_PTR((_base), (_off))) - -#define HUB_REG_PTR_S(_base, _off, _data) \ - HUB_S(HUB_REG_PTR((_base), (_off)), (_data)) - -/* - * Software structure locations -- permanently fixed - * See diagram in kldir.h - */ - -#define PHYS_RAMBASE 0x0 -#define K0_RAMBASE PHYS_TO_K0(PHYS_RAMBASE) - -#define EX_HANDLER_OFFSET(slice) ((slice) << 16) -#define EX_HANDLER_ADDR(nasid, slice) \ - PHYS_TO_K0(NODE_OFFSET(nasid) | EX_HANDLER_OFFSET(slice)) -#define EX_HANDLER_SIZE 0x0400 - -#define EX_FRAME_OFFSET(slice) ((slice) << 16 | 0x400) -#define EX_FRAME_ADDR(nasid, slice) \ - PHYS_TO_K0(NODE_OFFSET(nasid) | EX_FRAME_OFFSET(slice)) -#define EX_FRAME_SIZE 0x0c00 - -#define ARCS_SPB_OFFSET 0x1000 -#define ARCS_SPB_ADDR(nasid) \ - PHYS_TO_K0(NODE_OFFSET(nasid) | ARCS_SPB_OFFSET) -#define ARCS_SPB_SIZE 0x0400 - -#define KLDIR_OFFSET 0x2000 -#define KLDIR_ADDR(nasid) \ - TO_NODE_UNCAC((nasid), KLDIR_OFFSET) -#define KLDIR_SIZE 0x0400 - - -/* - * Software structure locations -- indirected through KLDIR - * See diagram in kldir.h - * - * Important: All low memory structures must only be accessed - * uncached, except for the symmon stacks. - */ - -#define KLI_LAUNCH 0 /* Dir. entries */ -#define KLI_KLCONFIG 1 -#define KLI_NMI 2 -#define KLI_GDA 3 -#define KLI_FREEMEM 4 -#define KLI_SYMMON_STK 5 -#define KLI_PI_ERROR 6 -#define KLI_KERN_VARS 7 -#define KLI_KERN_XP 8 -#define KLI_KERN_PARTID 9 - -#ifndef __ASSEMBLY__ - -#define KLD_BASE(nasid) ((kldir_ent_t *) KLDIR_ADDR(nasid)) -#define KLD_LAUNCH(nasid) (KLD_BASE(nasid) + KLI_LAUNCH) -#define KLD_NMI(nasid) (KLD_BASE(nasid) + KLI_NMI) -#define KLD_KLCONFIG(nasid) (KLD_BASE(nasid) + KLI_KLCONFIG) -#define KLD_PI_ERROR(nasid) (KLD_BASE(nasid) + KLI_PI_ERROR) -#define KLD_GDA(nasid) (KLD_BASE(nasid) + KLI_GDA) -#define KLD_SYMMON_STK(nasid) (KLD_BASE(nasid) + KLI_SYMMON_STK) -#define KLD_FREEMEM(nasid) (KLD_BASE(nasid) + KLI_FREEMEM) -#define KLD_KERN_VARS(nasid) (KLD_BASE(nasid) + KLI_KERN_VARS) -#define KLD_KERN_XP(nasid) (KLD_BASE(nasid) + KLI_KERN_XP) -#define KLD_KERN_PARTID(nasid) (KLD_BASE(nasid) + KLI_KERN_PARTID) - -#define LAUNCH_OFFSET(nasid, slice) \ - (KLD_LAUNCH(nasid)->offset + \ - KLD_LAUNCH(nasid)->stride * (slice)) -#define LAUNCH_ADDR(nasid, slice) \ - TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice)) -#define LAUNCH_SIZE(nasid) KLD_LAUNCH(nasid)->size - -#define NMI_OFFSET(nasid, slice) \ - (KLD_NMI(nasid)->offset + \ - KLD_NMI(nasid)->stride * (slice)) -#define NMI_ADDR(nasid, slice) \ - TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice)) -#define NMI_SIZE(nasid) KLD_NMI(nasid)->size - -#define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset -#define KLCONFIG_ADDR(nasid) \ - TO_NODE_UNCAC((nasid), KLCONFIG_OFFSET(nasid)) -#define KLCONFIG_SIZE(nasid) KLD_KLCONFIG(nasid)->size - -#define GDA_ADDR(nasid) KLD_GDA(nasid)->pointer -#define GDA_SIZE(nasid) KLD_GDA(nasid)->size - -#define SYMMON_STK_OFFSET(nasid, slice) \ - (KLD_SYMMON_STK(nasid)->offset + \ - KLD_SYMMON_STK(nasid)->stride * (slice)) -#define SYMMON_STK_STRIDE(nasid) KLD_SYMMON_STK(nasid)->stride - -#define SYMMON_STK_ADDR(nasid, slice) \ - TO_NODE_CAC((nasid), SYMMON_STK_OFFSET(nasid, slice)) - -#define SYMMON_STK_SIZE(nasid) KLD_SYMMON_STK(nasid)->stride - -#define SYMMON_STK_END(nasid) (SYMMON_STK_ADDR(nasid, 0) + KLD_SYMMON_STK(nasid)->size) - -/* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a - * relocatable program - */ -#define UNIX_DEBUG_LOADADDR 0x300000 -#define SYMMON_LOADADDR(nasid) \ - TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000)) - -#define FREEMEM_OFFSET(nasid) KLD_FREEMEM(nasid)->offset -#define FREEMEM_ADDR(nasid) SYMMON_STK_END(nasid) -/* - * XXX - * Fix this. FREEMEM_ADDR should be aware of if symmon is loaded. - * Also, it should take into account what prom thinks to be a safe - * address - PHYS_TO_K0(NODE_OFFSET(nasid) + FREEMEM_OFFSET(nasid)) - */ -#define FREEMEM_SIZE(nasid) KLD_FREEMEM(nasid)->size - -#define PI_ERROR_OFFSET(nasid) KLD_PI_ERROR(nasid)->offset -#define PI_ERROR_ADDR(nasid) \ - TO_NODE_UNCAC((nasid), PI_ERROR_OFFSET(nasid)) -#define PI_ERROR_SIZE(nasid) KLD_PI_ERROR(nasid)->size - -#define NODE_OFFSET_TO_K0(_nasid, _off) \ - PHYS_TO_K0((NODE_OFFSET(_nasid) + (_off)) | CAC_BASE) -#define NODE_OFFSET_TO_K1(_nasid, _off) \ - TO_UNCAC((NODE_OFFSET(_nasid) + (_off)) | UNCAC_BASE) -#define K0_TO_NODE_OFFSET(_k0addr) \ - ((__psunsigned_t)(_k0addr) & NODE_ADDRSPACE_MASK) - -#define KERN_VARS_ADDR(nasid) KLD_KERN_VARS(nasid)->pointer -#define KERN_VARS_SIZE(nasid) KLD_KERN_VARS(nasid)->size - -#define KERN_XP_ADDR(nasid) KLD_KERN_XP(nasid)->pointer -#define KERN_XP_SIZE(nasid) KLD_KERN_XP(nasid)->size - -#define GPDA_ADDR(nasid) TO_NODE_CAC(nasid, GPDA_OFFSET) - -#endif /* !__ASSEMBLY__ */ - - -#endif /* _ASM_SN_ADDRS_H */ diff --git a/include/asm-mips/sn/agent.h b/include/asm-mips/sn/agent.h deleted file mode 100644 index ac4ea85c3a5c..000000000000 --- a/include/asm-mips/sn/agent.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * This file has definitions for the hub and snac interfaces. - * - * Copyright (C) 1992 - 1997, 1999, 2000 Silcon Graphics, Inc. - * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org) - */ -#ifndef _ASM_SGI_SN_AGENT_H -#define _ASM_SGI_SN_AGENT_H - -#include -#include -#include - -#if defined(CONFIG_SGI_IP27) -#include -#elif defined(CONFIG_SGI_IP35) -#include -#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */ - -/* - * NIC register macros - */ - -#if defined(CONFIG_SGI_IP27) -#define HUB_NIC_ADDR(_cpuid) \ - REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)), \ - MD_MLAN_CTL) -#endif - -#define SET_HUB_NIC(_my_cpuid, _val) \ - (HUB_S(HUB_NIC_ADDR(_my_cpuid), (_val))) - -#define SET_MY_HUB_NIC(_v) \ - SET_HUB_NIC(cpuid(), (_v)) - -#define GET_HUB_NIC(_my_cpuid) \ - (HUB_L(HUB_NIC_ADDR(_my_cpuid))) - -#define GET_MY_HUB_NIC() \ - GET_HUB_NIC(cpuid()) - -#endif /* _ASM_SGI_SN_AGENT_H */ diff --git a/include/asm-mips/sn/arch.h b/include/asm-mips/sn/arch.h deleted file mode 100644 index bd75945e10ff..000000000000 --- a/include/asm-mips/sn/arch.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * SGI specific setup. - * - * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc. - * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) - */ -#ifndef _ASM_SN_ARCH_H -#define _ASM_SN_ARCH_H - -#include -#include -#ifdef CONFIG_SGI_IP27 -#include -#endif - -typedef u64 hubreg_t; - -#define cputonasid(cpu) (sn_cpu_info[(cpu)].p_nasid) -#define cputoslice(cpu) (sn_cpu_info[(cpu)].p_slice) -#define makespnum(_nasid, _slice) \ - (((_nasid) << CPUS_PER_NODE_SHFT) | (_slice)) - -#define INVALID_NASID (nasid_t)-1 -#define INVALID_CNODEID (cnodeid_t)-1 -#define INVALID_PNODEID (pnodeid_t)-1 -#define INVALID_MODULE (moduleid_t)-1 -#define INVALID_PARTID (partid_t)-1 - -extern nasid_t get_nasid(void); -extern cnodeid_t get_cpu_cnode(cpuid_t); -extern int get_cpu_slice(cpuid_t); - -/* - * NO ONE should access these arrays directly. The only reason we refer to - * them here is to avoid the procedure call that would be required in the - * macros below. (Really want private data members here :-) - */ -extern cnodeid_t nasid_to_compact_node[MAX_NASIDS]; -extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; - -/* - * These macros are used by various parts of the kernel to convert - * between the three different kinds of node numbering. At least some - * of them may change to procedure calls in the future, but the macros - * will continue to work. Don't use the arrays above directly. - */ - -#define NASID_TO_REGION(nnode) \ - ((nnode) >> \ - (is_fine_dirmode() ? NASID_TO_FINEREG_SHFT : NASID_TO_COARSEREG_SHFT)) - -extern cnodeid_t nasid_to_compact_node[MAX_NASIDS]; -extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; -extern cnodeid_t cpuid_to_compact_node[MAXCPUS]; - -#define NASID_TO_COMPACT_NODEID(nnode) (nasid_to_compact_node[nnode]) -#define COMPACT_TO_NASID_NODEID(cnode) (compact_to_nasid_node[cnode]) -#define CPUID_TO_COMPACT_NODEID(cpu) (cpuid_to_compact_node[(cpu)]) - -#endif /* _ASM_SN_ARCH_H */ diff --git a/include/asm-mips/sn/fru.h b/include/asm-mips/sn/fru.h deleted file mode 100644 index b3e3606723b7..000000000000 --- a/include/asm-mips/sn/fru.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from IRIX - * - * Copyright (C) 1992 - 1997, 1999 Silcon Graphics, Inc. - * Copyright (C) 1999, 2006 Ralf Baechle (ralf@linux-mips) - */ -#ifndef __ASM_SN_FRU_H -#define __ASM_SN_FRU_H - -#define MAX_DIMMS 8 /* max # of dimm banks */ -#define MAX_PCIDEV 8 /* max # of pci devices on a pci bus */ - -typedef unsigned char confidence_t; - -typedef struct kf_mem_s { - confidence_t km_confidence; /* confidence level that the memory is bad - * is this necessary ? - */ - confidence_t km_dimm[MAX_DIMMS]; - /* confidence level that dimm[i] is bad - *I think this is the right number - */ - -} kf_mem_t; - -typedef struct kf_cpu_s { - confidence_t kc_confidence; /* confidence level that cpu is bad */ - confidence_t kc_icache; /* confidence level that instr. cache is bad */ - confidence_t kc_dcache; /* confidence level that data cache is bad */ - confidence_t kc_scache; /* confidence level that sec. cache is bad */ - confidence_t kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */ -} kf_cpu_t; - -typedef struct kf_pci_bus_s { - confidence_t kpb_belief; /* confidence level that the pci bus is bad */ - confidence_t kpb_pcidev_belief[MAX_PCIDEV]; - /* confidence level that the pci dev is bad */ -} kf_pci_bus_t; - -#endif /* __ASM_SN_FRU_H */ diff --git a/include/asm-mips/sn/gda.h b/include/asm-mips/sn/gda.h deleted file mode 100644 index 9cb6ff770915..000000000000 --- a/include/asm-mips/sn/gda.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from IRIX . - * - * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc. - * - * gda.h -- Contains the data structure for the global data area, - * The GDA contains information communicated between the - * PROM, SYMMON, and the kernel. - */ -#ifndef _ASM_SN_GDA_H -#define _ASM_SN_GDA_H - -#include - -#define GDA_MAGIC 0x58464552 - -/* - * GDA Version History - * - * Version # | Change - * -------------+------------------------------------------------------- - * 1 | Initial SN0 version - * 2 | Prom sets g_partid field to the partition number. 0 IS - * | a valid partition #. - */ - -#define GDA_VERSION 2 /* Current GDA version # */ - -#define G_MAGICOFF 0 -#define G_VERSIONOFF 4 -#define G_PROMOPOFF 6 -#define G_MASTEROFF 8 -#define G_VDSOFF 12 -#define G_HKDNORMOFF 16 -#define G_HKDUTLBOFF 24 -#define G_HKDXUTLBOFF 32 -#define G_PARTIDOFF 40 -#define G_TABLEOFF 128 - -#ifndef __ASSEMBLY__ - -typedef struct gda { - u32 g_magic; /* GDA magic number */ - u16 g_version; /* Version of this structure */ - u16 g_masterid; /* The NASID:CPUNUM of the master cpu */ - u32 g_promop; /* Passes requests from the kernel to prom */ - u32 g_vds; /* Store the virtual dipswitches here */ - void **g_hooked_norm;/* ptr to pda loc for norm hndlr */ - void **g_hooked_utlb;/* ptr to pda loc for utlb hndlr */ - void **g_hooked_xtlb;/* ptr to pda loc for xtlb hndlr */ - int g_partid; /* partition id */ - int g_symmax; /* Max symbols in name table. */ - void *g_dbstab; /* Address of idbg symbol table */ - char *g_nametab; /* Address of idbg name table */ - void *g_ktext_repmask; - /* Pointer to a mask of nodes with copies - * of the kernel. */ - char g_padding[56]; /* pad out to 128 bytes */ - nasid_t g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node, - * indexed by cnodeid. - */ -} gda_t; - -#define GDA ((gda_t*) GDA_ADDR(get_nasid())) - -#endif /* !__ASSEMBLY__ */ -/* - * Define: PART_GDA_VERSION - * Purpose: Define the minimum version of the GDA required, lower - * revisions assume GDA is NOT set up, and read partition - * information from the board info. - */ -#define PART_GDA_VERSION 2 - -/* - * The following requests can be sent to the PROM during startup. - */ - -#define PROMOP_MAGIC 0x0ead0000 -#define PROMOP_MAGIC_MASK 0x0fff0000 - -#define PROMOP_BIST_SHIFT 11 -#define PROMOP_BIST_MASK (0x3 << 11) - -#define PROMOP_REG PI_ERR_STACK_ADDR_A - -#define PROMOP_INVALID (PROMOP_MAGIC | 0x00) -#define PROMOP_HALT (PROMOP_MAGIC | 0x10) -#define PROMOP_POWERDOWN (PROMOP_MAGIC | 0x20) -#define PROMOP_RESTART (PROMOP_MAGIC | 0x30) -#define PROMOP_REBOOT (PROMOP_MAGIC | 0x40) -#define PROMOP_IMODE (PROMOP_MAGIC | 0x50) - -#define PROMOP_CMD_MASK 0x00f0 -#define PROMOP_OPTIONS_MASK 0xfff0 - -#define PROMOP_SKIP_DIAGS 0x0100 /* don't bother running diags */ -#define PROMOP_SKIP_MEMINIT 0x0200 /* don't bother initing memory */ -#define PROMOP_SKIP_DEVINIT 0x0400 /* don't bother initing devices */ -#define PROMOP_BIST1 0x0800 /* keep track of which BIST ran */ -#define PROMOP_BIST2 0x1000 /* keep track of which BIST ran */ - -#endif /* _ASM_SN_GDA_H */ diff --git a/include/asm-mips/sn/hub.h b/include/asm-mips/sn/hub.h deleted file mode 100644 index 1992d9254a08..000000000000 --- a/include/asm-mips/sn/hub.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_SN_HUB_H -#define __ASM_SN_HUB_H - -#include -#include -#include -#include -#include -#include - -/* ip27-hubio.c */ -extern unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, - unsigned long xtalk_addr, size_t size); -extern void hub_pio_init(cnodeid_t cnode); - -#endif /* __ASM_SN_HUB_H */ diff --git a/include/asm-mips/sn/intr.h b/include/asm-mips/sn/intr.h deleted file mode 100644 index 6718b644b970..000000000000 --- a/include/asm-mips/sn/intr.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997 Silicon Graphics, Inc. - */ -#ifndef __ASM_SN_INTR_H -#define __ASM_SN_INTR_H - -/* Number of interrupt levels associated with each interrupt register. */ -#define N_INTPEND_BITS 64 - -#define INT_PEND0_BASELVL 0 -#define INT_PEND1_BASELVL 64 - -#define N_INTPENDJUNK_BITS 8 -#define INTPENDJUNK_CLRBIT 0x80 - -/* - * Macros to manipulate the interrupt register on the calling hub chip. - */ - -#define LOCAL_HUB_SEND_INTR(level) \ - LOCAL_HUB_S(PI_INT_PEND_MOD, (0x100 | (level))) -#define REMOTE_HUB_SEND_INTR(hub, level) \ - REMOTE_HUB_S((hub), PI_INT_PEND_MOD, (0x100 | (level))) - -/* - * When clearing the interrupt, make sure this clear does make it - * to the hub. Otherwise we could end up losing interrupts. - * We do an uncached load of the int_pend0 register to ensure this. - */ - -#define LOCAL_HUB_CLR_INTR(level) \ -do { \ - LOCAL_HUB_S(PI_INT_PEND_MOD, (level)); \ - LOCAL_HUB_L(PI_INT_PEND0); \ -} while (0); - -#define REMOTE_HUB_CLR_INTR(hub, level) \ -do { \ - nasid_t __hub = (hub); \ - \ - REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level)); \ - REMOTE_HUB_L(__hub, PI_INT_PEND0); \ -} while (0); - -/* - * Hard-coded interrupt levels: - */ - -/* - * L0 = SW1 - * L1 = SW2 - * L2 = INT_PEND0 - * L3 = INT_PEND1 - * L4 = RTC - * L5 = Profiling Timer - * L6 = Hub Errors - * L7 = Count/Compare (T5 counters) - */ - - -/* - * INT_PEND0 hard-coded bits. - */ - -/* - * INT_PEND0 bits determined by hardware: - */ -#define RESERVED_INTR 0 /* What is this bit? */ -#define GFX_INTR_A 1 -#define GFX_INTR_B 2 -#define PG_MIG_INTR 3 -#define UART_INTR 4 -#define CC_PEND_A 5 -#define CC_PEND_B 6 - -/* - * INT_PEND0 used by the kernel for itself ... - */ -#define CPU_RESCHED_A_IRQ 7 -#define CPU_RESCHED_B_IRQ 8 -#define CPU_CALL_A_IRQ 9 -#define CPU_CALL_B_IRQ 10 -#define MSC_MESG_INTR 11 -#define BASE_PCI_IRQ 12 - -/* - * INT_PEND0 again, bits determined by hardware / hardcoded: - */ -#define SDISK_INTR 63 /* SABLE name */ -#define IP_PEND0_6_63 63 /* What is this bit? */ - -/* - * INT_PEND1 hard-coded bits: - */ -#define NI_BRDCAST_ERR_A 39 -#define NI_BRDCAST_ERR_B 40 - -#define LLP_PFAIL_INTR_A 41 /* see ml/SN/SN0/sysctlr.c */ -#define LLP_PFAIL_INTR_B 42 - -#define TLB_INTR_A 43 /* used for tlb flush random */ -#define TLB_INTR_B 44 - -#define IP27_INTR_0 45 /* Reserved for PROM use */ -#define IP27_INTR_1 46 /* do not use in Kernel */ -#define IP27_INTR_2 47 -#define IP27_INTR_3 48 -#define IP27_INTR_4 49 -#define IP27_INTR_5 50 -#define IP27_INTR_6 51 -#define IP27_INTR_7 52 - -#define BRIDGE_ERROR_INTR 53 /* Setup by PROM to catch */ - /* Bridge Errors */ -#define DEBUG_INTR_A 54 -#define DEBUG_INTR_B 55 /* Used by symmon to stop all cpus */ -#define IO_ERROR_INTR 57 /* Setup by PROM */ -#define CLK_ERR_INTR 58 -#define COR_ERR_INTR_A 59 -#define COR_ERR_INTR_B 60 -#define MD_COR_ERR_INTR 61 -#define NI_ERROR_INTR 62 -#define MSC_PANIC_INTR 63 - -#endif /* __ASM_SN_INTR_H */ diff --git a/include/asm-mips/sn/io.h b/include/asm-mips/sn/io.h deleted file mode 100644 index 24c6775fbb0f..000000000000 --- a/include/asm-mips/sn/io.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000, 2003 Ralf Baechle - * Copyright (C) 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_SN_IO_H -#define _ASM_SN_IO_H - -#if defined(CONFIG_SGI_IP27) -#include -#endif - - -#define IIO_ITTE_BASE 0x400160 /* base of translation table entries */ -#define IIO_ITTE(bigwin) (IIO_ITTE_BASE + 8*(bigwin)) - -#define IIO_ITTE_OFFSET_BITS 5 /* size of offset field */ -#define IIO_ITTE_OFFSET_MASK ((1<> BWIN_SIZE_BITS) & \ - IIO_ITTE_OFFSET_MASK) << IIO_ITTE_OFFSET_SHIFT) | \ - (io_or_mem << IIO_ITTE_IOSP_SHIFT) | \ - (((widget) & IIO_ITTE_WIDGET_MASK) << IIO_ITTE_WIDGET_SHIFT))) - -#define IIO_ITTE_DISABLE(nasid, bigwin) \ - IIO_ITTE_PUT((nasid), HUB_PIO_MAP_TO_MEM, \ - (bigwin), IIO_ITTE_INVALID_WIDGET, 0) - -#define IIO_ITTE_GET(nasid, bigwin) REMOTE_HUB_ADDR((nasid), IIO_ITTE(bigwin)) - -/* - * Macro which takes the widget number, and returns the - * IO PRB address of that widget. - * value _x is expected to be a widget number in the range - * 0, 8 - 0xF - */ -#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \ - (_x) : \ - (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) ) - -#endif /* _ASM_SN_IO_H */ diff --git a/include/asm-mips/sn/ioc3.h b/include/asm-mips/sn/ioc3.h deleted file mode 100644 index 099677774d71..000000000000 --- a/include/asm-mips/sn/ioc3.h +++ /dev/null @@ -1,663 +0,0 @@ -/* - * Copyright (C) 1999, 2000 Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _IOC3_H -#define _IOC3_H - -#include - -/* SUPERIO uart register map */ -typedef volatile struct ioc3_uartregs { - union { - volatile u8 rbr; /* read only, DLAB == 0 */ - volatile u8 thr; /* write only, DLAB == 0 */ - volatile u8 dll; /* DLAB == 1 */ - } u1; - union { - volatile u8 ier; /* DLAB == 0 */ - volatile u8 dlm; /* DLAB == 1 */ - } u2; - union { - volatile u8 iir; /* read only */ - volatile u8 fcr; /* write only */ - } u3; - volatile u8 iu_lcr; - volatile u8 iu_mcr; - volatile u8 iu_lsr; - volatile u8 iu_msr; - volatile u8 iu_scr; -} ioc3_uregs_t; - -#define iu_rbr u1.rbr -#define iu_thr u1.thr -#define iu_dll u1.dll -#define iu_ier u2.ier -#define iu_dlm u2.dlm -#define iu_iir u3.iir -#define iu_fcr u3.fcr - -struct ioc3_sioregs { - volatile u8 fill[0x141]; /* starts at 0x141 */ - - volatile u8 uartc; - volatile u8 kbdcg; - - volatile u8 fill0[0x150 - 0x142 - 1]; - - volatile u8 pp_data; - volatile u8 pp_dsr; - volatile u8 pp_dcr; - - volatile u8 fill1[0x158 - 0x152 - 1]; - - volatile u8 pp_fifa; - volatile u8 pp_cfgb; - volatile u8 pp_ecr; - - volatile u8 fill2[0x168 - 0x15a - 1]; - - volatile u8 rtcad; - volatile u8 rtcdat; - - volatile u8 fill3[0x170 - 0x169 - 1]; - - struct ioc3_uartregs uartb; /* 0x20170 */ - struct ioc3_uartregs uarta; /* 0x20178 */ -}; - -/* Register layout of IOC3 in configuration space. */ -struct ioc3 { - volatile u32 pad0[7]; /* 0x00000 */ - volatile u32 sio_ir; /* 0x0001c */ - volatile u32 sio_ies; /* 0x00020 */ - volatile u32 sio_iec; /* 0x00024 */ - volatile u32 sio_cr; /* 0x00028 */ - volatile u32 int_out; /* 0x0002c */ - volatile u32 mcr; /* 0x00030 */ - - /* General Purpose I/O registers */ - volatile u32 gpcr_s; /* 0x00034 */ - volatile u32 gpcr_c; /* 0x00038 */ - volatile u32 gpdr; /* 0x0003c */ - volatile u32 gppr_0; /* 0x00040 */ - volatile u32 gppr_1; /* 0x00044 */ - volatile u32 gppr_2; /* 0x00048 */ - volatile u32 gppr_3; /* 0x0004c */ - volatile u32 gppr_4; /* 0x00050 */ - volatile u32 gppr_5; /* 0x00054 */ - volatile u32 gppr_6; /* 0x00058 */ - volatile u32 gppr_7; /* 0x0005c */ - volatile u32 gppr_8; /* 0x00060 */ - volatile u32 gppr_9; /* 0x00064 */ - volatile u32 gppr_10; /* 0x00068 */ - volatile u32 gppr_11; /* 0x0006c */ - volatile u32 gppr_12; /* 0x00070 */ - volatile u32 gppr_13; /* 0x00074 */ - volatile u32 gppr_14; /* 0x00078 */ - volatile u32 gppr_15; /* 0x0007c */ - - /* Parallel Port Registers */ - volatile u32 ppbr_h_a; /* 0x00080 */ - volatile u32 ppbr_l_a; /* 0x00084 */ - volatile u32 ppcr_a; /* 0x00088 */ - volatile u32 ppcr; /* 0x0008c */ - volatile u32 ppbr_h_b; /* 0x00090 */ - volatile u32 ppbr_l_b; /* 0x00094 */ - volatile u32 ppcr_b; /* 0x00098 */ - - /* Keyboard and Mouse Registers */ - volatile u32 km_csr; /* 0x0009c */ - volatile u32 k_rd; /* 0x000a0 */ - volatile u32 m_rd; /* 0x000a4 */ - volatile u32 k_wd; /* 0x000a8 */ - volatile u32 m_wd; /* 0x000ac */ - - /* Serial Port Registers */ - volatile u32 sbbr_h; /* 0x000b0 */ - volatile u32 sbbr_l; /* 0x000b4 */ - volatile u32 sscr_a; /* 0x000b8 */ - volatile u32 stpir_a; /* 0x000bc */ - volatile u32 stcir_a; /* 0x000c0 */ - volatile u32 srpir_a; /* 0x000c4 */ - volatile u32 srcir_a; /* 0x000c8 */ - volatile u32 srtr_a; /* 0x000cc */ - volatile u32 shadow_a; /* 0x000d0 */ - volatile u32 sscr_b; /* 0x000d4 */ - volatile u32 stpir_b; /* 0x000d8 */ - volatile u32 stcir_b; /* 0x000dc */ - volatile u32 srpir_b; /* 0x000e0 */ - volatile u32 srcir_b; /* 0x000e4 */ - volatile u32 srtr_b; /* 0x000e8 */ - volatile u32 shadow_b; /* 0x000ec */ - - /* Ethernet Registers */ - volatile u32 emcr; /* 0x000f0 */ - volatile u32 eisr; /* 0x000f4 */ - volatile u32 eier; /* 0x000f8 */ - volatile u32 ercsr; /* 0x000fc */ - volatile u32 erbr_h; /* 0x00100 */ - volatile u32 erbr_l; /* 0x00104 */ - volatile u32 erbar; /* 0x00108 */ - volatile u32 ercir; /* 0x0010c */ - volatile u32 erpir; /* 0x00110 */ - volatile u32 ertr; /* 0x00114 */ - volatile u32 etcsr; /* 0x00118 */ - volatile u32 ersr; /* 0x0011c */ - volatile u32 etcdc; /* 0x00120 */ - volatile u32 ebir; /* 0x00124 */ - volatile u32 etbr_h; /* 0x00128 */ - volatile u32 etbr_l; /* 0x0012c */ - volatile u32 etcir; /* 0x00130 */ - volatile u32 etpir; /* 0x00134 */ - volatile u32 emar_h; /* 0x00138 */ - volatile u32 emar_l; /* 0x0013c */ - volatile u32 ehar_h; /* 0x00140 */ - volatile u32 ehar_l; /* 0x00144 */ - volatile u32 micr; /* 0x00148 */ - volatile u32 midr_r; /* 0x0014c */ - volatile u32 midr_w; /* 0x00150 */ - volatile u32 pad1[(0x20000 - 0x00154) / 4]; - - /* SuperIO Registers XXX */ - struct ioc3_sioregs sregs; /* 0x20000 */ - volatile u32 pad2[(0x40000 - 0x20180) / 4]; - - /* SSRAM Diagnostic Access */ - volatile u32 ssram[(0x80000 - 0x40000) / 4]; - - /* Bytebus device offsets - 0x80000 - Access to the generic devices selected with DEV0 - 0x9FFFF bytebus DEV_SEL_0 - 0xA0000 - Access to the generic devices selected with DEV1 - 0xBFFFF bytebus DEV_SEL_1 - 0xC0000 - Access to the generic devices selected with DEV2 - 0xDFFFF bytebus DEV_SEL_2 - 0xE0000 - Access to the generic devices selected with DEV3 - 0xFFFFF bytebus DEV_SEL_3 */ -}; - -/* - * Ethernet RX Buffer - */ -struct ioc3_erxbuf { - u32 w0; /* first word (valid,bcnt,cksum) */ - u32 err; /* second word various errors */ - /* next comes n bytes of padding */ - /* then the received ethernet frame itself */ -}; - -#define ERXBUF_IPCKSUM_MASK 0x0000ffff -#define ERXBUF_BYTECNT_MASK 0x07ff0000 -#define ERXBUF_BYTECNT_SHIFT 16 -#define ERXBUF_V 0x80000000 - -#define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */ -#define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */ -#define ERXBUF_CODERR 0x00000004 /* aka RSV13 */ -#define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */ -#define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */ -#define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */ -#define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */ -#define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */ -#define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */ -#define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */ -#define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */ -#define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */ - -/* - * Ethernet TX Descriptor - */ -#define ETXD_DATALEN 104 -struct ioc3_etxd { - u32 cmd; /* command field */ - u32 bufcnt; /* buffer counts field */ - u64 p1; /* buffer pointer 1 */ - u64 p2; /* buffer pointer 2 */ - u8 data[ETXD_DATALEN]; /* opt. tx data */ -}; - -#define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */ -#define ETXD_INTWHENDONE 0x00001000 /* intr when done */ -#define ETXD_D0V 0x00010000 /* data 0 valid */ -#define ETXD_B1V 0x00020000 /* buf 1 valid */ -#define ETXD_B2V 0x00040000 /* buf 2 valid */ -#define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */ -#define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */ -#define ETXD_CHKOFF_SHIFT 20 - -#define ETXD_D0CNT_MASK 0x0000007f -#define ETXD_B1CNT_MASK 0x0007ff00 -#define ETXD_B1CNT_SHIFT 8 -#define ETXD_B2CNT_MASK 0x7ff00000 -#define ETXD_B2CNT_SHIFT 20 - -/* - * Bytebus device space - */ -#define IOC3_BYTEBUS_DEV0 0x80000L -#define IOC3_BYTEBUS_DEV1 0xa0000L -#define IOC3_BYTEBUS_DEV2 0xc0000L -#define IOC3_BYTEBUS_DEV3 0xe0000L - -/* ------------------------------------------------------------------------- */ - -/* Superio Registers (PIO Access) */ -#define IOC3_SIO_BASE 0x20000 -#define IOC3_SIO_UARTC (IOC3_SIO_BASE+0x141) /* UART Config */ -#define IOC3_SIO_KBDCG (IOC3_SIO_BASE+0x142) /* KBD Config */ -#define IOC3_SIO_PP_BASE (IOC3_SIO_BASE+PP_BASE) /* Parallel Port */ -#define IOC3_SIO_RTC_BASE (IOC3_SIO_BASE+0x168) /* Real Time Clock */ -#define IOC3_SIO_UB_BASE (IOC3_SIO_BASE+UARTB_BASE) /* UART B */ -#define IOC3_SIO_UA_BASE (IOC3_SIO_BASE+UARTA_BASE) /* UART A */ - -/* SSRAM Diagnostic Access */ -#define IOC3_SSRAM IOC3_RAM_OFF /* base of SSRAM diagnostic access */ -#define IOC3_SSRAM_LEN 0x40000 /* 256kb (address space size, may not be fully populated) */ -#define IOC3_SSRAM_DM 0x0000ffff /* data mask */ -#define IOC3_SSRAM_PM 0x00010000 /* parity mask */ - -/* bitmasks for PCI_SCR */ -#define PCI_SCR_PAR_RESP_EN 0x00000040 /* enb PCI parity checking */ -#define PCI_SCR_SERR_EN 0x00000100 /* enable the SERR# driver */ -#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */ -#define PCI_SCR_RX_SERR (0x1 << 16) -#define PCI_SCR_DROP_MODE (0x1 << 17) -#define PCI_SCR_SIG_PAR_ERR (0x1 << 24) -#define PCI_SCR_SIG_TAR_ABRT (0x1 << 27) -#define PCI_SCR_RX_TAR_ABRT (0x1 << 28) -#define PCI_SCR_SIG_MST_ABRT (0x1 << 29) -#define PCI_SCR_SIG_SERR (0x1 << 30) -#define PCI_SCR_PAR_ERR (0x1 << 31) - -/* bitmasks for IOC3_KM_CSR */ -#define KM_CSR_K_WRT_PEND 0x00000001 /* kbd port xmitting or resetting */ -#define KM_CSR_M_WRT_PEND 0x00000002 /* mouse port xmitting or resetting */ -#define KM_CSR_K_LCB 0x00000004 /* Line Cntrl Bit for last KBD write */ -#define KM_CSR_M_LCB 0x00000008 /* same for mouse */ -#define KM_CSR_K_DATA 0x00000010 /* state of kbd data line */ -#define KM_CSR_K_CLK 0x00000020 /* state of kbd clock line */ -#define KM_CSR_K_PULL_DATA 0x00000040 /* pull kbd data line low */ -#define KM_CSR_K_PULL_CLK 0x00000080 /* pull kbd clock line low */ -#define KM_CSR_M_DATA 0x00000100 /* state of ms data line */ -#define KM_CSR_M_CLK 0x00000200 /* state of ms clock line */ -#define KM_CSR_M_PULL_DATA 0x00000400 /* pull ms data line low */ -#define KM_CSR_M_PULL_CLK 0x00000800 /* pull ms clock line low */ -#define KM_CSR_EMM_MODE 0x00001000 /* emulation mode */ -#define KM_CSR_SIM_MODE 0x00002000 /* clock X8 */ -#define KM_CSR_K_SM_IDLE 0x00004000 /* Keyboard is idle */ -#define KM_CSR_M_SM_IDLE 0x00008000 /* Mouse is idle */ -#define KM_CSR_K_TO 0x00010000 /* Keyboard trying to send/receive */ -#define KM_CSR_M_TO 0x00020000 /* Mouse trying to send/receive */ -#define KM_CSR_K_TO_EN 0x00040000 /* KM_CSR_K_TO + KM_CSR_K_TO_EN = cause - SIO_IR to assert */ -#define KM_CSR_M_TO_EN 0x00080000 /* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause - SIO_IR to assert */ -#define KM_CSR_K_CLAMP_ONE 0x00100000 /* Pull K_CLK low after rec. one char */ -#define KM_CSR_M_CLAMP_ONE 0x00200000 /* Pull M_CLK low after rec. one char */ -#define KM_CSR_K_CLAMP_THREE 0x00400000 /* Pull K_CLK low after rec. three chars */ -#define KM_CSR_M_CLAMP_THREE 0x00800000 /* Pull M_CLK low after rec. three char */ - -/* bitmasks for IOC3_K_RD and IOC3_M_RD */ -#define KM_RD_DATA_2 0x000000ff /* 3rd char recvd since last read */ -#define KM_RD_DATA_2_SHIFT 0 -#define KM_RD_DATA_1 0x0000ff00 /* 2nd char recvd since last read */ -#define KM_RD_DATA_1_SHIFT 8 -#define KM_RD_DATA_0 0x00ff0000 /* 1st char recvd since last read */ -#define KM_RD_DATA_0_SHIFT 16 -#define KM_RD_FRAME_ERR_2 0x01000000 /* framing or parity error in byte 2 */ -#define KM_RD_FRAME_ERR_1 0x02000000 /* same for byte 1 */ -#define KM_RD_FRAME_ERR_0 0x04000000 /* same for byte 0 */ - -#define KM_RD_KBD_MSE 0x08000000 /* 0 if from kbd, 1 if from mouse */ -#define KM_RD_OFLO 0x10000000 /* 4th char recvd before this read */ -#define KM_RD_VALID_2 0x20000000 /* DATA_2 valid */ -#define KM_RD_VALID_1 0x40000000 /* DATA_1 valid */ -#define KM_RD_VALID_0 0x80000000 /* DATA_0 valid */ -#define KM_RD_VALID_ALL (KM_RD_VALID_0|KM_RD_VALID_1|KM_RD_VALID_2) - -/* bitmasks for IOC3_K_WD & IOC3_M_WD */ -#define KM_WD_WRT_DATA 0x000000ff /* write to keyboard/mouse port */ -#define KM_WD_WRT_DATA_SHIFT 0 - -/* bitmasks for serial RX status byte */ -#define RXSB_OVERRUN 0x01 /* char(s) lost */ -#define RXSB_PAR_ERR 0x02 /* parity error */ -#define RXSB_FRAME_ERR 0x04 /* framing error */ -#define RXSB_BREAK 0x08 /* break character */ -#define RXSB_CTS 0x10 /* state of CTS */ -#define RXSB_DCD 0x20 /* state of DCD */ -#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */ -#define RXSB_DATA_VALID 0x80 /* data byte, FRAME_ERR PAR_ERR & BREAK valid */ - -/* bitmasks for serial TX control byte */ -#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */ -#define TXCB_INVALID 0x00 /* byte is invalid */ -#define TXCB_VALID 0x40 /* byte is valid */ -#define TXCB_MCR 0x80 /* data<7:0> to modem control register */ -#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */ - -/* bitmasks for IOC3_SBBR_L */ -#define SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */ -#define SBBR_L_BASE 0xfffff000 /* lower serial ring base addr */ - -/* bitmasks for IOC3_SSCR_ */ -#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */ -#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ -#define SSCR_HFC_EN 0x00020000 /* hardware flow control enabled */ -#define SSCR_RX_RING_DCD 0x00040000 /* post RX record on delta-DCD */ -#define SSCR_RX_RING_CTS 0x00080000 /* post RX record on delta-CTS */ -#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */ -#define SSCR_DIAG 0x00200000 /* bypass clock divider for sim */ -#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */ -#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */ -#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */ -#define SSCR_PAUSE_STATE 0x40000000 /* sets when PAUSE takes effect */ -#define SSCR_RESET 0x80000000 /* reset DMA channels */ - -/* all producer/comsumer pointers are the same bitfield */ -#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */ -#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */ -#define PROD_CONS_PTR_OFF 3 - -/* bitmasks for IOC3_SRCIR_ */ -#define SRCIR_ARM 0x80000000 /* arm RX timer */ - -/* bitmasks for IOC3_SRPIR_ */ -#define SRPIR_BYTE_CNT 0x07000000 /* bytes in packer */ -#define SRPIR_BYTE_CNT_SHIFT 24 - -/* bitmasks for IOC3_STCIR_ */ -#define STCIR_BYTE_CNT 0x0f000000 /* bytes in unpacker */ -#define STCIR_BYTE_CNT_SHIFT 24 - -/* bitmasks for IOC3_SHADOW_ */ -#define SHADOW_DR 0x00000001 /* data ready */ -#define SHADOW_OE 0x00000002 /* overrun error */ -#define SHADOW_PE 0x00000004 /* parity error */ -#define SHADOW_FE 0x00000008 /* framing error */ -#define SHADOW_BI 0x00000010 /* break interrupt */ -#define SHADOW_THRE 0x00000020 /* transmit holding register empty */ -#define SHADOW_TEMT 0x00000040 /* transmit shift register empty */ -#define SHADOW_RFCE 0x00000080 /* char in RX fifo has an error */ -#define SHADOW_DCTS 0x00010000 /* delta clear to send */ -#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */ -#define SHADOW_CTS 0x00100000 /* clear to send */ -#define SHADOW_DCD 0x00800000 /* data carrier detect */ -#define SHADOW_DTR 0x01000000 /* data terminal ready */ -#define SHADOW_RTS 0x02000000 /* request to send */ -#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ -#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ -#define SHADOW_LOOP 0x10000000 /* loopback enabled */ - -/* bitmasks for IOC3_SRTR_ */ -#define SRTR_CNT 0x00000fff /* reload value for RX timer */ -#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */ -#define SRTR_CNT_VAL_SHIFT 16 -#define SRTR_HZ 16000 /* SRTR clock frequency */ - -/* bitmasks for IOC3_SIO_IR, IOC3_SIO_IEC and IOC3_SIO_IES */ -#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */ -#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */ -#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */ -#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */ -#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */ -#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */ -#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */ -#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */ -#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */ -#define SIO_IR_SB_TX_MT 0x00000200 /* */ -#define SIO_IR_SB_RX_FULL 0x00000400 /* */ -#define SIO_IR_SB_RX_HIGH 0x00000800 /* */ -#define SIO_IR_SB_RX_TIMER 0x00001000 /* */ -#define SIO_IR_SB_DELTA_DCD 0x00002000 /* */ -#define SIO_IR_SB_DELTA_CTS 0x00004000 /* */ -#define SIO_IR_SB_INT 0x00008000 /* */ -#define SIO_IR_SB_TX_EXPLICIT 0x00010000 /* */ -#define SIO_IR_SB_MEMERR 0x00020000 /* */ -#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */ -#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */ -#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */ -#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */ -#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */ -#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */ -#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */ -#define SIO_IR_GEN_INT_SHIFT 28 - -/* per device interrupt masks */ -#define SIO_IR_SA (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL | \ - SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER | \ - SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS | \ - SIO_IR_SA_INT | SIO_IR_SA_TX_EXPLICIT | \ - SIO_IR_SA_MEMERR) -#define SIO_IR_SB (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL | \ - SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER | \ - SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS | \ - SIO_IR_SB_INT | SIO_IR_SB_TX_EXPLICIT | \ - SIO_IR_SB_MEMERR) -#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \ - SIO_IR_PP_INTB | SIO_IR_PP_MEMERR) -#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1) - -/* macro to load pending interrupts */ -#define IOC3_PENDING_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \ - PCI_INW(&((mem)->sio_ies_ro))) - -/* bitmasks for SIO_CR */ -#define SIO_CR_SIO_RESET 0x00000001 /* reset the SIO */ -#define SIO_CR_SER_A_BASE 0x000000fe /* DMA poll addr port A */ -#define SIO_CR_SER_A_BASE_SHIFT 1 -#define SIO_CR_SER_B_BASE 0x00007f00 /* DMA poll addr port B */ -#define SIO_CR_SER_B_BASE_SHIFT 8 -#define SIO_SR_CMD_PULSE 0x00078000 /* byte bus strobe length */ -#define SIO_CR_CMD_PULSE_SHIFT 15 -#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */ -#define SIO_CR_ARB_DIAG_TXA 0x00000000 -#define SIO_CR_ARB_DIAG_RXA 0x00080000 -#define SIO_CR_ARB_DIAG_TXB 0x00100000 -#define SIO_CR_ARB_DIAG_RXB 0x00180000 -#define SIO_CR_ARB_DIAG_PP 0x00200000 -#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */ - -/* bitmasks for INT_OUT */ -#define INT_OUT_COUNT 0x0000ffff /* pulse interval timer */ -#define INT_OUT_MODE 0x00070000 /* mode mask */ -#define INT_OUT_MODE_0 0x00000000 /* set output to 0 */ -#define INT_OUT_MODE_1 0x00040000 /* set output to 1 */ -#define INT_OUT_MODE_1PULSE 0x00050000 /* send 1 pulse */ -#define INT_OUT_MODE_PULSES 0x00060000 /* send 1 pulse every interval */ -#define INT_OUT_MODE_SQW 0x00070000 /* toggle output every interval */ -#define INT_OUT_DIAG 0x40000000 /* diag mode */ -#define INT_OUT_INT_OUT 0x80000000 /* current state of INT_OUT */ - -/* time constants for INT_OUT */ -#define INT_OUT_NS_PER_TICK (30 * 260) /* 30 ns PCI clock, divisor=260 */ -#define INT_OUT_TICKS_PER_PULSE 3 /* outgoing pulse lasts 3 ticks */ -#define INT_OUT_US_TO_COUNT(x) /* convert uS to a count value */ \ - (((x) * 10 + INT_OUT_NS_PER_TICK / 200) * \ - 100 / INT_OUT_NS_PER_TICK - 1) -#define INT_OUT_COUNT_TO_US(x) /* convert count value to uS */ \ - (((x) + 1) * INT_OUT_NS_PER_TICK / 1000) -#define INT_OUT_MIN_TICKS 3 /* min period is width of pulse in "ticks" */ -#define INT_OUT_MAX_TICKS INT_OUT_COUNT /* largest possible count */ - -/* bitmasks for GPCR */ -#define GPCR_DIR 0x000000ff /* tristate pin input or output */ -#define GPCR_DIR_PIN(x) (1<<(x)) /* access one of the DIR bits */ -#define GPCR_EDGE 0x000f0000 /* extint edge or level sensitive */ -#define GPCR_EDGE_PIN(x) (1<<((x)+15)) /* access one of the EDGE bits */ - -/* values for GPCR */ -#define GPCR_INT_OUT_EN 0x00100000 /* enable INT_OUT to pin 0 */ -#define GPCR_MLAN_EN 0x00200000 /* enable MCR to pin 8 */ -#define GPCR_DIR_SERA_XCVR 0x00000080 /* Port A Transceiver select enable */ -#define GPCR_DIR_SERB_XCVR 0x00000040 /* Port B Transceiver select enable */ -#define GPCR_DIR_PHY_RST 0x00000020 /* ethernet PHY reset enable */ - -/* defs for some of the generic I/O pins */ -#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */ -#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */ -#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */ - -#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */ -#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin controlling uart b mode select */ -#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin controlling uart a mode select */ - -#define EMCR_DUPLEX 0x00000001 -#define EMCR_PROMISC 0x00000002 -#define EMCR_PADEN 0x00000004 -#define EMCR_RXOFF_MASK 0x000001f8 -#define EMCR_RXOFF_SHIFT 3 -#define EMCR_RAMPAR 0x00000200 -#define EMCR_BADPAR 0x00000800 -#define EMCR_BUFSIZ 0x00001000 -#define EMCR_TXDMAEN 0x00002000 -#define EMCR_TXEN 0x00004000 -#define EMCR_RXDMAEN 0x00008000 -#define EMCR_RXEN 0x00010000 -#define EMCR_LOOPBACK 0x00020000 -#define EMCR_ARB_DIAG 0x001c0000 -#define EMCR_ARB_DIAG_IDLE 0x00200000 -#define EMCR_RST 0x80000000 - -#define EISR_RXTIMERINT 0x00000001 -#define EISR_RXTHRESHINT 0x00000002 -#define EISR_RXOFLO 0x00000004 -#define EISR_RXBUFOFLO 0x00000008 -#define EISR_RXMEMERR 0x00000010 -#define EISR_RXPARERR 0x00000020 -#define EISR_TXEMPTY 0x00010000 -#define EISR_TXRTRY 0x00020000 -#define EISR_TXEXDEF 0x00040000 -#define EISR_TXLCOL 0x00080000 -#define EISR_TXGIANT 0x00100000 -#define EISR_TXBUFUFLO 0x00200000 -#define EISR_TXEXPLICIT 0x00400000 -#define EISR_TXCOLLWRAP 0x00800000 -#define EISR_TXDEFERWRAP 0x01000000 -#define EISR_TXMEMERR 0x02000000 -#define EISR_TXPARERR 0x04000000 - -#define ERCSR_THRESH_MASK 0x000001ff /* enet RX threshold */ -#define ERCSR_RX_TMR 0x40000000 /* simulation only */ -#define ERCSR_DIAG_OFLO 0x80000000 /* simulation only */ - -#define ERBR_ALIGNMENT 4096 -#define ERBR_L_RXRINGBASE_MASK 0xfffff000 - -#define ERBAR_BARRIER_BIT 0x0100 -#define ERBAR_RXBARR_MASK 0xffff0000 -#define ERBAR_RXBARR_SHIFT 16 - -#define ERCIR_RXCONSUME_MASK 0x00000fff - -#define ERPIR_RXPRODUCE_MASK 0x00000fff -#define ERPIR_ARM 0x80000000 - -#define ERTR_CNT_MASK 0x000007ff - -#define ETCSR_IPGT_MASK 0x0000007f -#define ETCSR_IPGR1_MASK 0x00007f00 -#define ETCSR_IPGR1_SHIFT 8 -#define ETCSR_IPGR2_MASK 0x007f0000 -#define ETCSR_IPGR2_SHIFT 16 -#define ETCSR_NOTXCLK 0x80000000 - -#define ETCDC_COLLCNT_MASK 0x0000ffff -#define ETCDC_DEFERCNT_MASK 0xffff0000 -#define ETCDC_DEFERCNT_SHIFT 16 - -#define ETBR_ALIGNMENT (64*1024) -#define ETBR_L_RINGSZ_MASK 0x00000001 -#define ETBR_L_RINGSZ128 0 -#define ETBR_L_RINGSZ512 1 -#define ETBR_L_TXRINGBASE_MASK 0xffffc000 - -#define ETCIR_TXCONSUME_MASK 0x0000ffff -#define ETCIR_IDLE 0x80000000 - -#define ETPIR_TXPRODUCE_MASK 0x0000ffff - -#define EBIR_TXBUFPROD_MASK 0x0000001f -#define EBIR_TXBUFCONS_MASK 0x00001f00 -#define EBIR_TXBUFCONS_SHIFT 8 -#define EBIR_RXBUFPROD_MASK 0x007fc000 -#define EBIR_RXBUFPROD_SHIFT 14 -#define EBIR_RXBUFCONS_MASK 0xff800000 -#define EBIR_RXBUFCONS_SHIFT 23 - -#define MICR_REGADDR_MASK 0x0000001f -#define MICR_PHYADDR_MASK 0x000003e0 -#define MICR_PHYADDR_SHIFT 5 -#define MICR_READTRIG 0x00000400 -#define MICR_BUSY 0x00000800 - -#define MIDR_DATA_MASK 0x0000ffff - -#define ERXBUF_IPCKSUM_MASK 0x0000ffff -#define ERXBUF_BYTECNT_MASK 0x07ff0000 -#define ERXBUF_BYTECNT_SHIFT 16 -#define ERXBUF_V 0x80000000 - -#define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */ -#define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */ -#define ERXBUF_CODERR 0x00000004 /* aka RSV13 */ -#define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */ -#define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */ -#define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */ -#define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */ -#define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */ -#define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */ -#define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */ -#define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */ -#define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */ - -#define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */ -#define ETXD_INTWHENDONE 0x00001000 /* intr when done */ -#define ETXD_D0V 0x00010000 /* data 0 valid */ -#define ETXD_B1V 0x00020000 /* buf 1 valid */ -#define ETXD_B2V 0x00040000 /* buf 2 valid */ -#define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */ -#define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */ -#define ETXD_CHKOFF_SHIFT 20 - -#define ETXD_D0CNT_MASK 0x0000007f -#define ETXD_B1CNT_MASK 0x0007ff00 -#define ETXD_B1CNT_SHIFT 8 -#define ETXD_B2CNT_MASK 0x7ff00000 -#define ETXD_B2CNT_SHIFT 20 - -typedef enum ioc3_subdevs_e { - ioc3_subdev_ether, - ioc3_subdev_generic, - ioc3_subdev_nic, - ioc3_subdev_kbms, - ioc3_subdev_ttya, - ioc3_subdev_ttyb, - ioc3_subdev_ecpp, - ioc3_subdev_rt, - ioc3_nsubdevs -} ioc3_subdev_t; - -/* subdevice disable bits, - * from the standard INFO_LBL_SUBDEVS - */ -#define IOC3_SDB_ETHER (1<. - * - * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. - * Copyright (C) 1999, 2000 by Ralf Baechle - */ -#ifndef _ASM_SN_KLCONFIG_H -#define _ASM_SN_KLCONFIG_H - -/* - * The KLCONFIG structures store info about the various BOARDs found - * during Hardware Discovery. In addition, it stores info about the - * components found on the BOARDs. - */ - -/* - * WARNING: - * Certain assembly language routines (notably xxxxx.s) in the IP27PROM - * will depend on the format of the data structures in this file. In - * most cases, rearranging the fields can seriously break things. - * Adding fields in the beginning or middle can also break things. - * Add fields if necessary, to the end of a struct in such a way - * that offsets of existing fields do not change. - */ - -#include -#include - -#if defined(CONFIG_SGI_IP27) - -#include -//#include -// XXX Stolen from : -#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ -#include -//#include -//#include - -#elif defined(CONFIG_SGI_IP35) - -#include -#include -#include -#include - -#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */ - -#if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35) -#include -#include -#include -#if defined(CONFIG_SGI_IP35) -// The hack file has to be before vector and after sn0_fru.... -#include -#include -#include -#endif /* CONFIG_SGI_IP35 */ -#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */ - -typedef u64 nic_t; - -#define KLCFGINFO_MAGIC 0xbeedbabe - -typedef s32 klconf_off_t; - -/* - * Some IMPORTANT OFFSETS. These are the offsets on all NODES. - */ -#define MAX_MODULE_ID 255 -#define SIZE_PAD 4096 /* 4k padding for structures */ -/* - * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets, - * 2 Midplanes assuming no pci card cages - */ -#define MAX_SLOTS_PER_NODE (1 + 2 + 6 + 2) - -/* XXX if each node is guranteed to have some memory */ - -#define MAX_PCI_DEVS 8 - -/* lboard_t->brd_flags fields */ -/* All bits in this field are currently used. Try the pad fields if - you need more flag bits */ - -#define ENABLE_BOARD 0x01 -#define FAILED_BOARD 0x02 -#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which - are discovered twice. Use one of them */ -#define VISITED_BOARD 0x08 /* Used for compact hub numbering. */ -#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */ -#define GLOBAL_MASTER_IO6 0x20 -#define THIRD_NIC_PRESENT 0x40 /* for future use */ -#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */ - -/* klinfo->flags fields */ - -#define KLINFO_ENABLE 0x01 /* This component is enabled */ -#define KLINFO_FAILED 0x02 /* This component failed */ -#define KLINFO_DEVICE 0x04 /* This component is a device */ -#define KLINFO_VISITED 0x08 /* This component has been visited */ -#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */ -#define KLINFO_INSTALL 0x20 /* Install a driver */ -#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */ -#define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL) - -#define GB2 0x80000000 - -#define MAX_RSV_PTRS 32 - -/* Structures to manage various data storage areas */ -/* The numbers must be contiguous since the array index i - is used in the code to allocate various areas. -*/ - -#define BOARD_STRUCT 0 -#define COMPONENT_STRUCT 1 -#define ERRINFO_STRUCT 2 -#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1) -#define DEVICE_STRUCT 3 - - -typedef struct console_s { - unsigned long uart_base; - unsigned long config_base; - unsigned long memory_base; - short baud; - short flag; - int type; - nasid_t nasid; - char wid; - char npci; - nic_t baseio_nic; -} console_t; - -typedef struct klc_malloc_hdr { - klconf_off_t km_base; - klconf_off_t km_limit; - klconf_off_t km_current; -} klc_malloc_hdr_t; - -/* Functions/macros needed to use this structure */ - -typedef struct kl_config_hdr { - u64 ch_magic; /* set this to KLCFGINFO_MAGIC */ - u32 ch_version; /* structure version number */ - klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */ - klconf_off_t ch_cons_off; /* offset of ch_cons */ - klconf_off_t ch_board_info; /* the link list of boards */ - console_t ch_cons_info; /* address info of the console */ - klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX]; - confidence_t ch_sw_belief; /* confidence that software is bad*/ - confidence_t ch_sn0net_belief; /* confidence that sn0net is bad */ -} kl_config_hdr_t; - - -#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) -#define KL_CONFIG_INFO_OFFSET(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_board_info) -#define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \ - (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off)) - -#define KL_CONFIG_INFO(_nasid) \ - (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ - NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \ - 0) -#define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic) - -#define KL_CONFIG_CHECK_MAGIC(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC) - -#define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC) - -/* --- New Macros for the changed kl_config_hdr_t structure --- */ - -#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ - ((unsigned long)_k + (_k->ch_malloc_hdr_off))) - -#define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n)) - -#define PTR_CH_CONS_INFO(_k) ((console_t *)\ - ((unsigned long)_k + (_k->ch_cons_off))) - -#define KL_CONFIG_CH_CONS_INFO(_n) PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n)) - -/* ------------------------------------------------------------- */ - -#define KL_CONFIG_INFO_START(_nasid) \ - (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t)) - -#define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid) -#define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off)) - -#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD) - -#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB) -#define XBOW_PORT_TYPE_IO(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO) - -#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE) -#define XBOW_PORT_NASID(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid) - -#define XBOW_PORT_IO 0x1 -#define XBOW_PORT_HUB 0x2 -#define XBOW_PORT_ENABLE 0x4 - -#define SN0_PORT_FENCE_SHFT 0 -#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT) - -/* - * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD - * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to - * the LOCAL/current NODE. REMOTE means it is attached to a different - * node.(TBD - Need a way to treat ROUTER boards.) - * - * There are 2 different structures to represent these boards - - * lboard - Local board, rboard - remote board. These 2 structures - * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer - * Figure below). The first byte of the rboard or lboard structure - * is used to find out its type - no unions are used. - * If it is a lboard, then the config info of this board will be found - * on the local node. (LOCAL NODE BASE + offset value gives pointer to - * the structure. - * If it is a rboard, the local structure contains the node number - * and the offset of the beginning of the LINKED LIST on the remote node. - * The details of the hardware on a remote node can be built locally, - * if required, by reading the LINKED LIST on the remote node and - * ignoring all the rboards on that node. - * - * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the - * First board info on the remote node. The remote node list is - * traversed as the local list, using the REMOTE BASE ADDRESS and not - * the local base address and ignoring all rboard values. - * - * - KLCONFIG - - +------------+ +------------+ +------------+ +------------+ - | lboard | +-->| lboard | +-->| rboard | +-->| lboard | - +------------+ | +------------+ | +------------+ | +------------+ - | board info | | | board info | | |errinfo,bptr| | | board info | - +------------+ | +------------+ | +------------+ | +------------+ - | offset |--+ | offset |--+ | offset |--+ |offset=NULL | - +------------+ +------------+ +------------+ +------------+ - - - +------------+ - | board info | - +------------+ +--------------------------------+ - | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) - +------------+ +--------------------------------+ - | compt 2 |--+ - +------------+ | +--------------------------------+ - | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) - +------------+ +--------------------------------+ - | errinfo |--+ - +------------+ | +--------------------------------+ - +--->|r/l brd errinfo,compt err flags | - +--------------------------------+ - - * - * Each BOARD consists of COMPONENTs and the BOARD structure has - * pointers (offsets) to its COMPONENT structure. - * The COMPONENT structure has version info, size and speed info, revision, - * error info and the NIC info. This structure can accommodate any - * BOARD with arbitrary COMPONENT composition. - * - * The ERRORINFO part of each BOARD has error information - * that describes errors about the BOARD itself. It also has flags to - * indicate the COMPONENT(s) on the board that have errors. The error - * information specific to the COMPONENT is present in the respective - * COMPONENT structure. - * - * The ERRORINFO structure is also treated like a COMPONENT, ie. the - * BOARD has pointers(offset) to the ERRORINFO structure. The rboard - * structure also has a pointer to the ERRORINFO structure. This is - * the place to store ERRORINFO about a REMOTE NODE, if the HUB on - * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where - * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can - * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info - * which is present on the REMOTE NODE.(TBD) - * REMOTE ERRINFO can be stored on any of the nearest nodes - * or on all the nearest nodes.(TBD) - * Like BOARD structures, REMOTE ERRINFO structures can be built locally - * using the rboard errinfo pointer. - * - * In order to get useful information from this Data organization, a set of - * interface routines are provided (TBD). The important thing to remember while - * manipulating the structures, is that, the NODE number information should - * be used. If the NODE is non-zero (remote) then each offset should - * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. - * This includes offsets for BOARDS, COMPONENTS and ERRORINFO. - * - * Note that these structures do not provide much info about connectivity. - * That info will be part of HWGRAPH, which is an extension of the cfg_t - * data structure. (ref IP27prom/cfg.h) It has to be extended to include - * the IO part of the Network(TBD). - * - * The data structures below define the above concepts. - */ - -/* - * Values for CPU types - */ -#define KL_CPU_R4000 0x1 /* Standard R4000 */ -#define KL_CPU_TFP 0x2 /* TFP processor */ -#define KL_CPU_R10000 0x3 /* R10000 (T5) */ -#define KL_CPU_NONE (-1) /* no cpu present in slot */ - -/* - * IP27 BOARD classes - */ - -#define KLCLASS_MASK 0xf0 -#define KLCLASS_NONE 0x00 -#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ -#define KLCLASS_CPU KLCLASS_NODE -#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI - and the non-graphics widget boards */ -#define KLCLASS_ROUTER 0x30 /* Router board */ -#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board - so that we can record error info */ -#define KLCLASS_GFX 0x50 /* graphics boards */ - -#define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx - * hw ifc to xtalk and are not gfx - * class for sw purposes */ - -#define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */ -#define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */ - -#define KLCLASS_UNKNOWN 0xf0 - -#define KLCLASS(_x) ((_x) & KLCLASS_MASK) - -/* - * IP27 board types - */ - -#define KLTYPE_MASK 0x0f -#define KLTYPE_NONE 0x00 -#define KLTYPE_EMPTY 0x00 - -#define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0) -#define KLTYPE_IP27 (KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */ - -#define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0) -#define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */ -#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */ -#define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2) -#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */ -#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3) -#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */ -#define KLTYPE_FDDI (KLCLASS_IO | 0x4) -#define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */ -#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */ -#define KLTYPE_PCI KLTYPE_HAROLD -#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */ -#define KLTYPE_MIO (KLCLASS_IO | 0x8) -#define KLTYPE_FC (KLCLASS_IO | 0x9) -#define KLTYPE_LINC (KLCLASS_IO | 0xA) -#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */ -#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */ -#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */ - -#define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */ -#define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */ -#define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */ - -#define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0) -#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) -#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */ -#define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2) -#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) - -#define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0) -#define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */ -#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8 -#define KLTYPE_PBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) - -#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) -#define KLTYPE_IBRICK (KLCLASS_IOBRICK | 0x1) -#define KLTYPE_PBRICK (KLCLASS_IOBRICK | 0x2) -#define KLTYPE_XBRICK (KLCLASS_IOBRICK | 0x3) - -#define KLTYPE_PBRICK_BRIDGE KLTYPE_PBRICK - -/* The value of type should be more than 8 so that hinv prints - * out the board name from the NIC string. For values less than - * 8 the name of the board needs to be hard coded in a few places. - * When bringup started nic names had not standardized and so we - * had to hard code. (For people interested in history.) - */ -#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9) - -#define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf) - -#define KLTYPE(_x) ((_x) & KLTYPE_MASK) -#define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \ - (l->brd_flags & SECOND_NIC_PRESENT)) -#define IS_MIO_IOC3(l, n) (IS_MIO_PRESENT(l) && (n > 2)) - -/* - * board structures - */ - -#define MAX_COMPTS_PER_BRD 24 - -#define LOCAL_BOARD 1 -#define REMOTE_BOARD 2 - -#define LBOARD_STRUCT_VERSION 2 - -typedef struct lboard_s { - klconf_off_t brd_next; /* Next BOARD */ - unsigned char struct_type; /* type of structure, local or remote */ - unsigned char brd_type; /* type+class */ - unsigned char brd_sversion; /* version of this structure */ - unsigned char brd_brevision; /* board revision */ - unsigned char brd_promver; /* board prom version, if any */ - unsigned char brd_flags; /* Enabled, Disabled etc */ - unsigned char brd_slot; /* slot number */ - unsigned short brd_debugsw; /* Debug switches */ - moduleid_t brd_module; /* module to which it belongs */ - partid_t brd_partition; /* Partition number */ - unsigned short brd_diagval; /* diagnostic value */ - unsigned short brd_diagparm; /* diagnostic parameter */ - unsigned char brd_inventory; /* inventory history */ - unsigned char brd_numcompts; /* Number of components */ - nic_t brd_nic; /* Number in CAN */ - nasid_t brd_nasid; /* passed parameter */ - klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ - klconf_off_t brd_errinfo; /* Board's error information */ - struct lboard_s *brd_parent; /* Logical parent for this brd */ - vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */ - confidence_t brd_confidence; /* confidence that the board is bad */ - nasid_t brd_owner; /* who owns this board */ - unsigned char brd_nic_flags; /* To handle 8 more NICs */ - char brd_name[32]; -} lboard_t; - - -/* - * Make sure we pass back the calias space address for local boards. - * klconfig board traversal and error structure extraction defines. - */ - -#define BOARD_SLOT(_brd) ((_brd)->brd_slot) - -#define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type) -#define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type) -#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1) -#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) -#define KLCF_MODULE_ID(_brd) ((_brd)->brd_module) - -#define KLCF_NEXT(_brd) \ - ((_brd)->brd_next ? \ - (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\ - NULL) -#define KLCF_COMP(_brd, _ndx) \ - (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \ - (_brd)->brd_compts[(_ndx)])) - -#define KLCF_COMP_ERROR(_brd, _comp) \ - (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) - -#define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type) -#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ - - - -/* - * Generic info structure. This stores common info about a - * component. - */ - -typedef struct klinfo_s { /* Generic info */ - unsigned char struct_type; /* type of this structure */ - unsigned char struct_version; /* version of this structure */ - unsigned char flags; /* Enabled, disabled etc */ - unsigned char revision; /* component revision */ - unsigned short diagval; /* result of diagnostics */ - unsigned short diagparm; /* diagnostic parameter */ - unsigned char inventory; /* previous inventory status */ - nic_t nic; /* MUst be aligned properly */ - unsigned char physid; /* physical id of component */ - unsigned int virtid; /* virtual id as seen by system */ - unsigned char widid; /* Widget id - if applicable */ - nasid_t nasid; /* node number - from parent */ - char pad1; /* pad out structure. */ - char pad2; /* pad out structure. */ - COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/ - klconf_off_t errinfo; /* component specific errors */ - unsigned short pad3; /* pci fields have moved over to */ - unsigned short pad4; /* klbri_t */ -} klinfo_t ; - -#define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE) -/* - * Component structures. - * Following are the currently identified components: - * CPU, HUB, MEM_BANK, - * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE) - * BRIDGE, IOC3, SuperIO, SCSI, FDDI - * ROUTER - * GRAPHICS - */ -#define KLSTRUCT_UNKNOWN 0 -#define KLSTRUCT_CPU 1 -#define KLSTRUCT_HUB 2 -#define KLSTRUCT_MEMBNK 3 -#define KLSTRUCT_XBOW 4 -#define KLSTRUCT_BRI 5 -#define KLSTRUCT_IOC3 6 -#define KLSTRUCT_PCI 7 -#define KLSTRUCT_VME 8 -#define KLSTRUCT_ROU 9 -#define KLSTRUCT_GFX 10 -#define KLSTRUCT_SCSI 11 -#define KLSTRUCT_FDDI 12 -#define KLSTRUCT_MIO 13 -#define KLSTRUCT_DISK 14 -#define KLSTRUCT_TAPE 15 -#define KLSTRUCT_CDROM 16 -#define KLSTRUCT_HUB_UART 17 -#define KLSTRUCT_IOC3ENET 18 -#define KLSTRUCT_IOC3UART 19 -#define KLSTRUCT_UNUSED 20 /* XXX UNUSED */ -#define KLSTRUCT_IOC3PCKM 21 -#define KLSTRUCT_RAD 22 -#define KLSTRUCT_HUB_TTY 23 -#define KLSTRUCT_IOC3_TTY 24 - -/* Early Access IO proms are compatible - only with KLSTRUCT values upto 24. */ - -#define KLSTRUCT_FIBERCHANNEL 25 -#define KLSTRUCT_MOD_SERIAL_NUM 26 -#define KLSTRUCT_IOC3MS 27 -#define KLSTRUCT_TPU 28 -#define KLSTRUCT_GSN_A 29 -#define KLSTRUCT_GSN_B 30 -#define KLSTRUCT_XTHD 31 - -/* - * These are the indices of various components within a lboard structure. - */ - -#define IP27_CPU0_INDEX 0 -#define IP27_CPU1_INDEX 1 -#define IP27_HUB_INDEX 2 -#define IP27_MEM_INDEX 3 - -#define BASEIO_BRIDGE_INDEX 0 -#define BASEIO_IOC3_INDEX 1 -#define BASEIO_SCSI1_INDEX 2 -#define BASEIO_SCSI2_INDEX 3 - -#define MIDPLANE_XBOW_INDEX 0 -#define ROUTER_COMPONENT_INDEX 0 - -#define CH4SCSI_BRIDGE_INDEX 0 - -/* Info holders for various hardware components */ - -typedef u64 *pci_t; -typedef u64 *vmeb_t; -typedef u64 *vmed_t; -typedef u64 *fddi_t; -typedef u64 *scsi_t; -typedef u64 *mio_t; -typedef u64 *graphics_t; -typedef u64 *router_t; - -/* - * The port info in ip27_cfg area translates to a lboart_t in the - * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t - * is stored in terms of a nasid and a offset from start of KLCONFIG - * area on that nasid. - */ -typedef struct klport_s { - nasid_t port_nasid; - unsigned char port_flag; - klconf_off_t port_offset; -} klport_t; - -typedef struct klcpu_s { /* CPU */ - klinfo_t cpu_info; - unsigned short cpu_prid; /* Processor PRID value */ - unsigned short cpu_fpirr; /* FPU IRR value */ - unsigned short cpu_speed; /* Speed in MHZ */ - unsigned short cpu_scachesz; /* secondary cache size in MB */ - unsigned short cpu_scachespeed;/* secondary cache speed in MHz */ -} klcpu_t ; - -#define CPU_STRUCT_VERSION 2 - -typedef struct klhub_s { /* HUB */ - klinfo_t hub_info; - unsigned int hub_flags; /* PCFG_HUB_xxx flags */ - klport_t hub_port; /* hub is connected to this */ - nic_t hub_box_nic; /* nic of containing box */ - klconf_off_t hub_mfg_nic; /* MFG NIC string */ - u64 hub_speed; /* Speed of hub in HZ */ -} klhub_t ; - -typedef struct klhub_uart_s { /* HUB */ - klinfo_t hubuart_info; - unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */ - nic_t hubuart_box_nic; /* nic of containing box */ -} klhub_uart_t ; - -#define MEMORY_STRUCT_VERSION 2 - -typedef struct klmembnk_s { /* MEMORY BANK */ - klinfo_t membnk_info; - short membnk_memsz; /* Total memory in megabytes */ - short membnk_dimm_select; /* bank to physical addr mapping*/ - short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */ - short membnk_attr; -} klmembnk_t ; - -#define KLCONFIG_MEMBNK_SIZE(_info, _bank) \ - ((_info)->membnk_bnksz[(_bank)]) - - -#define MEMBNK_PREMIUM 1 -#define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \ - ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank))) - -#define MAX_SERIAL_NUM_SIZE 10 - -typedef struct klmod_serial_num_s { - klinfo_t snum_info; - union { - char snum_str[MAX_SERIAL_NUM_SIZE]; - unsigned long long snum_int; - } snum; -} klmod_serial_num_t; - -/* Macros needed to access serial number structure in lboard_t. - Hard coded values are necessary since we cannot treat - serial number struct as a component without losing compatibility - between prom versions. */ - -#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\ - KLCF_COMP(_l, _l->brd_numcompts)) - -#define MAX_XBOW_LINKS 16 - -typedef struct klxbow_s { /* XBOW */ - klinfo_t xbow_info ; - klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */ - int xbow_master_hub_link; - /* type of brd connected+component struct ptr+flags */ -} klxbow_t ; - -#define MAX_PCI_SLOTS 8 - -typedef struct klpci_device_s { - s32 pci_device_id; /* 32 bits of vendor/device ID. */ - s32 pci_device_pad; /* 32 bits of padding. */ -} klpci_device_t; - -#define BRIDGE_STRUCT_VERSION 2 - -typedef struct klbri_s { /* BRIDGE */ - klinfo_t bri_info ; - unsigned char bri_eprominfo ; /* IO6prom connected to bridge */ - unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */ - pci_t pci_specific ; /* PCI Board config info */ - klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */ - klconf_off_t bri_mfg_nic ; -} klbri_t ; - -#define MAX_IOC3_TTY 2 - -typedef struct klioc3_s { /* IOC3 */ - klinfo_t ioc3_info ; - unsigned char ioc3_ssram ; /* Info about ssram */ - unsigned char ioc3_nvram ; /* Info about nvram */ - klinfo_t ioc3_superio ; /* Info about superio */ - klconf_off_t ioc3_tty_off ; - klinfo_t ioc3_enet ; - klconf_off_t ioc3_enet_off ; - klconf_off_t ioc3_kbd_off ; -} klioc3_t ; - -#define MAX_VME_SLOTS 8 - -typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */ - klinfo_t vmeb_info ; - vmeb_t vmeb_specific ; - klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ -} klvmeb_t ; - -typedef struct klvmed_s { /* VME DEVICE - VME BOARD */ - klinfo_t vmed_info ; - vmed_t vmed_specific ; - klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ -} klvmed_t ; - -#define ROUTER_VECTOR_VERS 2 - -/* XXX - Don't we need the number of ports here?!? */ -typedef struct klrou_s { /* ROUTER */ - klinfo_t rou_info ; - unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */ - nic_t rou_box_nic ; /* nic of the containing module */ - klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */ - klconf_off_t rou_mfg_nic ; /* MFG NIC string */ - u64 rou_vector; /* vector from master node */ -} klrou_t ; - -/* - * Graphics Controller/Device - * - * (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier - * used a couple different structures to store graphics information. - * For compatibility reasons, the newer data structure preserves some - * of the layout so that fields that are used in the old versions remain - * in the same place (with the same info). Determination of what version - * of this structure we have is done by checking the cookie field. - */ -#define KLGFX_COOKIE 0x0c0de000 - -typedef struct klgfx_s { /* GRAPHICS Device */ - klinfo_t gfx_info; - klconf_off_t old_gndevs; /* for compatibility with older proms */ - klconf_off_t old_gdoff0; /* for compatibility with older proms */ - unsigned int cookie; /* for compatibility with older proms */ - unsigned int moduleslot; - struct klgfx_s *gfx_next_pipe; - graphics_t gfx_specific; - klconf_off_t pad0; /* for compatibility with older proms */ - klconf_off_t gfx_mfg_nic; -} klgfx_t; - -typedef struct klxthd_s { - klinfo_t xthd_info ; - klconf_off_t xthd_mfg_nic ; /* MFG NIC string */ -} klxthd_t ; - -typedef struct kltpu_s { /* TPU board */ - klinfo_t tpu_info ; - klconf_off_t tpu_mfg_nic ; /* MFG NIC string */ -} kltpu_t ; - -typedef struct klgsn_s { /* GSN board */ - klinfo_t gsn_info ; - klconf_off_t gsn_mfg_nic ; /* MFG NIC string */ -} klgsn_t ; - -#define MAX_SCSI_DEVS 16 - -/* - * NOTE: THis is the max sized kl* structure and is used in klmalloc.c - * to allocate space of type COMPONENT. Make sure that if the size of - * any other component struct becomes more than this, then redefine - * that as the size to be klmalloced. - */ - -typedef struct klscsi_s { /* SCSI Controller */ - klinfo_t scsi_info ; - scsi_t scsi_specific ; - unsigned char scsi_numdevs ; - klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ; -} klscsi_t ; - -typedef struct klscdev_s { /* SCSI device */ - klinfo_t scdev_info ; - struct scsidisk_data *scdev_cfg ; /* driver fills up this */ -} klscdev_t ; - -typedef struct klttydev_s { /* TTY device */ - klinfo_t ttydev_info ; - struct terminal_data *ttydev_cfg ; /* driver fills up this */ -} klttydev_t ; - -typedef struct klenetdev_s { /* ENET device */ - klinfo_t enetdev_info ; - struct net_data *enetdev_cfg ; /* driver fills up this */ -} klenetdev_t ; - -typedef struct klkbddev_s { /* KBD device */ - klinfo_t kbddev_info ; - struct keyboard_data *kbddev_cfg ; /* driver fills up this */ -} klkbddev_t ; - -typedef struct klmsdev_s { /* mouse device */ - klinfo_t msdev_info ; - void *msdev_cfg ; -} klmsdev_t ; - -#define MAX_FDDI_DEVS 10 /* XXX Is this true */ - -typedef struct klfddi_s { /* FDDI */ - klinfo_t fddi_info ; - fddi_t fddi_specific ; - klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ; -} klfddi_t ; - -typedef struct klmio_s { /* MIO */ - klinfo_t mio_info ; - mio_t mio_specific ; -} klmio_t ; - - -typedef union klcomp_s { - klcpu_t kc_cpu; - klhub_t kc_hub; - klmembnk_t kc_mem; - klxbow_t kc_xbow; - klbri_t kc_bri; - klioc3_t kc_ioc3; - klvmeb_t kc_vmeb; - klvmed_t kc_vmed; - klrou_t kc_rou; - klgfx_t kc_gfx; - klscsi_t kc_scsi; - klscdev_t kc_scsi_dev; - klfddi_t kc_fddi; - klmio_t kc_mio; - klmod_serial_num_t kc_snum ; -} klcomp_t; - -typedef union kldev_s { /* for device structure allocation */ - klscdev_t kc_scsi_dev ; - klttydev_t kc_tty_dev ; - klenetdev_t kc_enet_dev ; - klkbddev_t kc_kbd_dev ; -} kldev_t ; - -/* Data structure interface routines. TBD */ - -/* Include launch info in this file itself? TBD */ - -/* - * TBD - Can the ARCS and device driver related info also be included in the - * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t - * structure, viz private to the IO4prom. - */ - -/* - * TBD - Allocation issues. - * - * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component, - * errinfo and allocate from them, or have a single heap and allocate all - * structures from it. Debug is easier in the former method since we can - * dump all similar structs in one command, but there will be lots of holes, - * in memory and max limits are needed for number of structures. - * Another way to make it organized, is to have a union of all components - * and allocate a aligned chunk of memory greater than the biggest - * component. - */ - -typedef union { - lboard_t *lbinfo ; -} biptr_t ; - - -#define BRI_PER_XBOW 6 -#define PCI_PER_BRI 8 -#define DEV_PER_PCI 16 - - -/* Virtual dipswitch values (starting from switch "7"): */ - -#define VDS_NOGFX 0x8000 /* Don't enable gfx and autoboot */ -#define VDS_NOMP 0x100 /* Don't start slave processors */ -#define VDS_MANUMODE 0x80 /* Manufacturing mode */ -#define VDS_NOARB 0x40 /* No bootmaster arbitration */ -#define VDS_PODMODE 0x20 /* Go straight to POD mode */ -#define VDS_NO_DIAGS 0x10 /* Don't run any diags after BM arb */ -#define VDS_DEFAULTS 0x08 /* Use default environment values */ -#define VDS_NOMEMCLEAR 0x04 /* Don't run mem cfg code */ -#define VDS_2ND_IO4 0x02 /* Boot from the second IO4 */ -#define VDS_DEBUG_PROM 0x01 /* Print PROM debugging messages */ - -/* external declarations of Linux kernel functions. */ - -extern lboard_t *find_lboard(lboard_t *start, unsigned char type); -extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type); -extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type); -extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int); -extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class); - - -extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu); - -#endif /* _ASM_SN_KLCONFIG_H */ diff --git a/include/asm-mips/sn/kldir.h b/include/asm-mips/sn/kldir.h deleted file mode 100644 index 1327e12e9645..000000000000 --- a/include/asm-mips/sn/kldir.h +++ /dev/null @@ -1,217 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from IRIX , revision 1.21. - * - * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. - * Copyright (C) 1999, 2000 by Ralf Baechle - */ -#ifndef _ASM_SN_KLDIR_H -#define _ASM_SN_KLDIR_H - - -/* - * The kldir memory area resides at a fixed place in each node's memory and - * provides pointers to most other IP27 memory areas. This allows us to - * resize and/or relocate memory areas at a later time without breaking all - * firmware and kernels that use them. Indices in the array are - * permanently dedicated to areas listed below. Some memory areas (marked - * below) reside at a permanently fixed location, but are included in the - * directory for completeness. - */ - -#define KLDIR_MAGIC 0x434d5f53505f5357 - -/* - * The upper portion of the memory map applies during boot - * only and is overwritten by IRIX/SYMMON. - * - * MEMORY MAP PER NODE - * - * 0x2000000 (32M) +-----------------------------------------+ - * | IO6 BUFFERS FOR FLASH ENET IOC3 | - * 0x1F80000 (31.5M) +-----------------------------------------+ - * | IO6 TEXT/DATA/BSS/stack | - * 0x1C00000 (30M) +-----------------------------------------+ - * | IO6 PROM DEBUG TEXT/DATA/BSS/stack | - * 0x0800000 (28M) +-----------------------------------------+ - * | IP27 PROM TEXT/DATA/BSS/stack | - * 0x1B00000 (27M) +-----------------------------------------+ - * | IP27 CFG | - * 0x1A00000 (26M) +-----------------------------------------+ - * | Graphics PROM | - * 0x1800000 (24M) +-----------------------------------------+ - * | 3rd Party PROM drivers | - * 0x1600000 (22M) +-----------------------------------------+ - * | | - * | Free | - * | | - * +-----------------------------------------+ - * | UNIX DEBUG Version | - * 0x190000 (2M--) +-----------------------------------------+ - * | SYMMON | - * | (For UNIX Debug only) | - * 0x34000 (208K) +-----------------------------------------+ - * | SYMMON STACK [NUM_CPU_PER_NODE] | - * | (For UNIX Debug only) | - * 0x25000 (148K) +-----------------------------------------+ - * | KLCONFIG - II (temp) | - * | | - * | ---------------------------- | - * | | - * | UNIX NON-DEBUG Version | - * 0x19000 (100K) +-----------------------------------------+ - * - * - * The lower portion of the memory map contains information that is - * permanent and is used by the IP27PROM, IO6PROM and IRIX. - * - * 0x19000 (100K) +-----------------------------------------+ - * | | - * | PI Error Spools (32K) | - * | | - * 0x12000 (72K) +-----------------------------------------+ - * | Unused | - * 0x11c00 (71K) +-----------------------------------------+ - * | CPU 1 NMI Eframe area | - * 0x11a00 (70.5K) +-----------------------------------------+ - * | CPU 0 NMI Eframe area | - * 0x11800 (70K) +-----------------------------------------+ - * | CPU 1 NMI Register save area | - * 0x11600 (69.5K) +-----------------------------------------+ - * | CPU 0 NMI Register save area | - * 0x11400 (69K) +-----------------------------------------+ - * | GDA (1k) | - * 0x11000 (68K) +-----------------------------------------+ - * | Early cache Exception stack | - * | and/or | - * | kernel/io6prom nmi registers | - * 0x10800 (66k) +-----------------------------------------+ - * | cache error eframe | - * 0x10400 (65K) +-----------------------------------------+ - * | Exception Handlers (UALIAS copy) | - * 0x10000 (64K) +-----------------------------------------+ - * | | - * | | - * | KLCONFIG - I (permanent) (48K) | - * | | - * | | - * | | - * 0x4000 (16K) +-----------------------------------------+ - * | NMI Handler (Protected Page) | - * 0x3000 (12K) +-----------------------------------------+ - * | ARCS PVECTORS (master node only) | - * 0x2c00 (11K) +-----------------------------------------+ - * | ARCS TVECTORS (master node only) | - * 0x2800 (10K) +-----------------------------------------+ - * | LAUNCH [NUM_CPU] | - * 0x2400 (9K) +-----------------------------------------+ - * | Low memory directory (KLDIR) | - * 0x2000 (8K) +-----------------------------------------+ - * | ARCS SPB (1K) | - * 0x1000 (4K) +-----------------------------------------+ - * | Early cache Exception stack | - * | and/or | - * | kernel/io6prom nmi registers | - * 0x800 (2k) +-----------------------------------------+ - * | cache error eframe | - * 0x400 (1K) +-----------------------------------------+ - * | Exception Handlers | - * 0x0 (0K) +-----------------------------------------+ - */ - -#ifdef __ASSEMBLY__ -#define KLDIR_OFF_MAGIC 0x00 -#define KLDIR_OFF_OFFSET 0x08 -#define KLDIR_OFF_POINTER 0x10 -#define KLDIR_OFF_SIZE 0x18 -#define KLDIR_OFF_COUNT 0x20 -#define KLDIR_OFF_STRIDE 0x28 -#endif /* __ASSEMBLY__ */ - -/* - * This is defined here because IP27_SYMMON_STK_SIZE must be at least what - * we define here. Since it's set up in the prom. We can't redefine it later - * and expect more space to be allocated. The way to find out the true size - * of the symmon stacks is to divide SYMMON_STK_SIZE by SYMMON_STK_STRIDE - * for a particular node. - */ -#define SYMMON_STACK_SIZE 0x8000 - -#if defined(PROM) - -/* - * These defines are prom version dependent. No code other than the IP27 - * prom should attempt to use these values. - */ -#define IP27_LAUNCH_OFFSET 0x2400 -#define IP27_LAUNCH_SIZE 0x400 -#define IP27_LAUNCH_COUNT 2 -#define IP27_LAUNCH_STRIDE 0x200 - -#define IP27_KLCONFIG_OFFSET 0x4000 -#define IP27_KLCONFIG_SIZE 0xc000 -#define IP27_KLCONFIG_COUNT 1 -#define IP27_KLCONFIG_STRIDE 0 - -#define IP27_NMI_OFFSET 0x3000 -#define IP27_NMI_SIZE 0x40 -#define IP27_NMI_COUNT 2 -#define IP27_NMI_STRIDE 0x40 - -#define IP27_PI_ERROR_OFFSET 0x12000 -#define IP27_PI_ERROR_SIZE 0x4000 -#define IP27_PI_ERROR_COUNT 1 -#define IP27_PI_ERROR_STRIDE 0 - -#define IP27_SYMMON_STK_OFFSET 0x25000 -#define IP27_SYMMON_STK_SIZE 0xe000 -#define IP27_SYMMON_STK_COUNT 2 -/* IP27_SYMMON_STK_STRIDE must be >= SYMMON_STACK_SIZE */ -#define IP27_SYMMON_STK_STRIDE 0x7000 - -#define IP27_FREEMEM_OFFSET 0x19000 -#define IP27_FREEMEM_SIZE -1 -#define IP27_FREEMEM_COUNT 1 -#define IP27_FREEMEM_STRIDE 0 - -#endif /* PROM */ -/* - * There will be only one of these in a partition so the IO6 must set it up. - */ -#define IO6_GDA_OFFSET 0x11000 -#define IO6_GDA_SIZE 0x400 -#define IO6_GDA_COUNT 1 -#define IO6_GDA_STRIDE 0 - -/* - * save area of kernel nmi regs in the prom format - */ -#define IP27_NMI_KREGS_OFFSET 0x11400 -#define IP27_NMI_KREGS_CPU_SIZE 0x200 -/* - * save area of kernel nmi regs in eframe format - */ -#define IP27_NMI_EFRAME_OFFSET 0x11800 -#define IP27_NMI_EFRAME_SIZE 0x200 - -#define KLDIR_ENT_SIZE 0x40 -#define KLDIR_MAX_ENTRIES (0x400 / 0x40) - -#ifndef __ASSEMBLY__ -typedef struct kldir_ent_s { - u64 magic; /* Indicates validity of entry */ - off_t offset; /* Offset from start of node space */ - unsigned long pointer; /* Pointer to area in some cases */ - size_t size; /* Size in bytes */ - u64 count; /* Repeat count if array, 1 if not */ - size_t stride; /* Stride if array, 0 if not */ - char rsvd[16]; /* Pad entry to 0x40 bytes */ - /* NOTE: These 16 bytes are used in the Partition KLDIR - entry to store partition info. Refer to klpart.h for this. */ -} kldir_ent_t; -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_SN_KLDIR_H */ diff --git a/include/asm-mips/sn/klkernvars.h b/include/asm-mips/sn/klkernvars.h deleted file mode 100644 index 5de4c5e8ab30..000000000000 --- a/include/asm-mips/sn/klkernvars.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * File ported from IRIX to Linux by Kanoj Sarcar, 06/08/00. - * Copyright 2000 Silicon Graphics, Inc. - */ -#ifndef __ASM_SN_KLKERNVARS_H -#define __ASM_SN_KLKERNVARS_H - -#define KV_MAGIC_OFFSET 0x0 -#define KV_RO_NASID_OFFSET 0x4 -#define KV_RW_NASID_OFFSET 0x6 - -#define KV_MAGIC 0x5f4b565f - -#ifndef __ASSEMBLY__ - -#include - -typedef struct kern_vars_s { - int kv_magic; - nasid_t kv_ro_nasid; - nasid_t kv_rw_nasid; - unsigned long kv_ro_baseaddr; - unsigned long kv_rw_baseaddr; -} kern_vars_t; - -#endif /* !__ASSEMBLY__ */ - -#endif /* __ASM_SN_KLKERNVARS_H */ - diff --git a/include/asm-mips/sn/launch.h b/include/asm-mips/sn/launch.h deleted file mode 100644 index b7c2226312c6..000000000000 --- a/include/asm-mips/sn/launch.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc. - * Copyright (C) 2000 by Colin Ngam - */ -#ifndef _ASM_SN_LAUNCH_H -#define _ASM_SN_LAUNCH_H - -#include -#include - -/* - * The launch data structure resides at a fixed place in each node's memory - * and is used to communicate between the master processor and the slave - * processors. - * - * The master stores launch parameters in the launch structure - * corresponding to a target processor that is in a slave loop, then sends - * an interrupt to the slave processor. The slave calls the desired - * function, then returns to the slave loop. The master may poll or wait - * for the slaves to finish. - * - * There is an array of launch structures, one per CPU on the node. One - * interrupt level is used per local CPU. - */ - -#define LAUNCH_MAGIC 0xaddbead2addbead3 -#ifdef CONFIG_SGI_IP27 -#define LAUNCH_SIZEOF 0x100 -#define LAUNCH_PADSZ 0xa0 -#endif - -#define LAUNCH_OFF_MAGIC 0x00 /* Struct offsets for assembly */ -#define LAUNCH_OFF_BUSY 0x08 -#define LAUNCH_OFF_CALL 0x10 -#define LAUNCH_OFF_CALLC 0x18 -#define LAUNCH_OFF_CALLPARM 0x20 -#define LAUNCH_OFF_STACK 0x28 -#define LAUNCH_OFF_GP 0x30 -#define LAUNCH_OFF_BEVUTLB 0x38 -#define LAUNCH_OFF_BEVNORMAL 0x40 -#define LAUNCH_OFF_BEVECC 0x48 - -#define LAUNCH_STATE_DONE 0 /* Return value of LAUNCH_POLL */ -#define LAUNCH_STATE_SENT 1 -#define LAUNCH_STATE_RECD 2 - -/* - * The launch routine is called only if the complement address is correct. - * - * Before control is transferred to a routine, the complement address - * is zeroed (invalidated) to prevent an accidental call from a spurious - * interrupt. - * - * The slave_launch routine turns on the BUSY flag, and the slave loop - * clears the BUSY flag after control is returned to it. - */ - -#ifndef __ASSEMBLY__ - -typedef int launch_state_t; -typedef void (*launch_proc_t)(u64 call_parm); - -typedef struct launch_s { - volatile u64 magic; /* Magic number */ - volatile u64 busy; /* Slave currently active */ - volatile launch_proc_t call_addr; /* Func. for slave to call */ - volatile u64 call_addr_c; /* 1's complement of call_addr*/ - volatile u64 call_parm; /* Single parm passed to call*/ - volatile void *stack_addr; /* Stack pointer for slave function */ - volatile void *gp_addr; /* Global pointer for slave func. */ - volatile char *bevutlb;/* Address of bev utlb ex handler */ - volatile char *bevnormal;/*Address of bev normal ex handler */ - volatile char *bevecc;/* Address of bev cache err handler */ - volatile char pad[160]; /* Pad to LAUNCH_SIZEOF */ -} launch_t; - -/* - * PROM entry points for launch routines are determined by IPxxprom/start.s - */ - -#define LAUNCH_SLAVE (*(void (*)(int nasid, int cpu, \ - launch_proc_t call_addr, \ - u64 call_parm, \ - void *stack_addr, \ - void *gp_addr)) \ - IP27PROM_LAUNCHSLAVE) - -#define LAUNCH_WAIT (*(void (*)(int nasid, int cpu, int timeout_msec)) \ - IP27PROM_WAITSLAVE) - -#define LAUNCH_POLL (*(launch_state_t (*)(int nasid, int cpu)) \ - IP27PROM_POLLSLAVE) - -#define LAUNCH_LOOP (*(void (*)(void)) \ - IP27PROM_SLAVELOOP) - -#define LAUNCH_FLASH (*(void (*)(void)) \ - IP27PROM_FLASHLEDS) - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_SN_LAUNCH_H */ diff --git a/include/asm-mips/sn/mapped_kernel.h b/include/asm-mips/sn/mapped_kernel.h deleted file mode 100644 index 721496a0bb92..000000000000 --- a/include/asm-mips/sn/mapped_kernel.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * File created by Kanoj Sarcar 06/06/00. - * Copyright 2000 Silicon Graphics, Inc. - */ -#ifndef __ASM_SN_MAPPED_KERNEL_H -#define __ASM_SN_MAPPED_KERNEL_H - -#include - -/* - * Note on how mapped kernels work: the text and data section is - * compiled at cksseg segment (LOADADDR = 0xc001c000), and the - * init/setup/data section gets a 16M virtual address bump in the - * ld.script file (so that tlblo0 and tlblo1 maps the sections). - * The vmlinux.64 section addresses are put in the xkseg range - * using the change-addresses makefile option. Use elfdump -of - * on IRIX to see where the sections go. The Origin loader loads - * the two sections contiguously in physical memory. The loader - * sets the entry point into kernel_entry using a xkphys address, - * but instead of using 0xa800000001160000, it uses the address - * 0xa800000000160000, which is where it physically loaded that - * code. So no jumps can be done before we have switched to using - * cksseg addresses. - */ -#include - -#define REP_BASE CAC_BASE - -#ifdef CONFIG_MAPPED_KERNEL - -#define MAPPED_ADDR_RO_TO_PHYS(x) (x - REP_BASE) -#define MAPPED_ADDR_RW_TO_PHYS(x) (x - REP_BASE - 16777216) - -#define MAPPED_KERN_RO_PHYSBASE(n) (hub_data(n)->kern_vars.kv_ro_baseaddr) -#define MAPPED_KERN_RW_PHYSBASE(n) (hub_data(n)->kern_vars.kv_rw_baseaddr) - -#define MAPPED_KERN_RO_TO_PHYS(x) \ - ((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \ - MAPPED_KERN_RO_PHYSBASE(get_compact_nodeid())) -#define MAPPED_KERN_RW_TO_PHYS(x) \ - ((unsigned long)MAPPED_ADDR_RW_TO_PHYS(x) | \ - MAPPED_KERN_RW_PHYSBASE(get_compact_nodeid())) - -#else /* CONFIG_MAPPED_KERNEL */ - -#define MAPPED_KERN_RO_TO_PHYS(x) (x - REP_BASE) -#define MAPPED_KERN_RW_TO_PHYS(x) (x - REP_BASE) - -#endif /* CONFIG_MAPPED_KERNEL */ - -#define MAPPED_KERN_RO_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x)) -#define MAPPED_KERN_RW_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x)) - -#endif /* __ASM_SN_MAPPED_KERNEL_H */ diff --git a/include/asm-mips/sn/nmi.h b/include/asm-mips/sn/nmi.h deleted file mode 100644 index 6b7b0b5f3729..000000000000 --- a/include/asm-mips/sn/nmi.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997 Silicon Graphics, Inc. - */ -#ifndef __ASM_SN_NMI_H -#define __ASM_SN_NMI_H - -#ident "$Revision: 1.5 $" - -#include - -/* - * The launch data structure resides at a fixed place in each node's memory - * and is used to communicate between the master processor and the slave - * processors. - * - * The master stores launch parameters in the launch structure - * corresponding to a target processor that is in a slave loop, then sends - * an interrupt to the slave processor. The slave calls the desired - * function, followed by an optional rendezvous function, then returns to - * the slave loop. The master does not wait for the slaves before - * returning. - * - * There is an array of launch structures, one per CPU on the node. One - * interrupt level is used per CPU. - */ - -#define NMI_MAGIC 0x48414d4d455201 -#define NMI_SIZEOF 0x40 - -#define NMI_OFF_MAGIC 0x00 /* Struct offsets for assembly */ -#define NMI_OFF_FLAGS 0x08 -#define NMI_OFF_CALL 0x10 -#define NMI_OFF_CALLC 0x18 -#define NMI_OFF_CALLPARM 0x20 -#define NMI_OFF_GMASTER 0x28 - -/* - * The NMI routine is called only if the complement address is - * correct. - * - * Before control is transferred to a routine, the complement address - * is zeroed (invalidated) to prevent an accidental call from a spurious - * interrupt. - * - */ - -#ifndef __ASSEMBLY__ - -typedef struct nmi_s { - volatile unsigned long magic; /* Magic number */ - volatile unsigned long flags; /* Combination of flags above */ - volatile void *call_addr; /* Routine for slave to call */ - volatile void *call_addr_c; /* 1's complement of address */ - volatile void *call_parm; /* Single parm passed to call */ - volatile unsigned long gmaster; /* Flag true only on global master*/ -} nmi_t; - -#endif /* !__ASSEMBLY__ */ - -/* Following definitions are needed both in the prom & the kernel - * to identify the format of the nmi cpu register save area in the - * low memory on each node. - */ -#ifndef __ASSEMBLY__ - -struct reg_struct { - unsigned long gpr[32]; - unsigned long sr; - unsigned long cause; - unsigned long epc; - unsigned long badva; - unsigned long error_epc; - unsigned long cache_err; - unsigned long nmi_sr; -}; - -#endif /* !__ASSEMBLY__ */ - -/* These are the assembly language offsets into the reg_struct structure */ - -#define R0_OFF 0x0 -#define R1_OFF 0x8 -#define R2_OFF 0x10 -#define R3_OFF 0x18 -#define R4_OFF 0x20 -#define R5_OFF 0x28 -#define R6_OFF 0x30 -#define R7_OFF 0x38 -#define R8_OFF 0x40 -#define R9_OFF 0x48 -#define R10_OFF 0x50 -#define R11_OFF 0x58 -#define R12_OFF 0x60 -#define R13_OFF 0x68 -#define R14_OFF 0x70 -#define R15_OFF 0x78 -#define R16_OFF 0x80 -#define R17_OFF 0x88 -#define R18_OFF 0x90 -#define R19_OFF 0x98 -#define R20_OFF 0xa0 -#define R21_OFF 0xa8 -#define R22_OFF 0xb0 -#define R23_OFF 0xb8 -#define R24_OFF 0xc0 -#define R25_OFF 0xc8 -#define R26_OFF 0xd0 -#define R27_OFF 0xd8 -#define R28_OFF 0xe0 -#define R29_OFF 0xe8 -#define R30_OFF 0xf0 -#define R31_OFF 0xf8 -#define SR_OFF 0x100 -#define CAUSE_OFF 0x108 -#define EPC_OFF 0x110 -#define BADVA_OFF 0x118 -#define ERROR_EPC_OFF 0x120 -#define CACHE_ERR_OFF 0x128 -#define NMISR_OFF 0x130 - -#endif /* __ASM_SN_NMI_H */ diff --git a/include/asm-mips/sn/sn0/addrs.h b/include/asm-mips/sn/sn0/addrs.h deleted file mode 100644 index b06190093bbc..000000000000 --- a/include/asm-mips/sn/sn0/addrs.h +++ /dev/null @@ -1,288 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from IRIX , revision 1.126. - * - * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. - * Copyright (C) 1999 by Ralf Baechle - */ -#ifndef _ASM_SN_SN0_ADDRS_H -#define _ASM_SN_SN0_ADDRS_H - - -/* - * SN0 (on a T5) Address map - * - * This file contains a set of definitions and macros which are used - * to reference into the major address spaces (CAC, HSPEC, IO, MSPEC, - * and UNCAC) used by the SN0 architecture. It also contains addresses - * for "major" statically locatable PROM/Kernel data structures, such as - * the partition table, the configuration data structure, etc. - * We make an implicit assumption that the processor using this file - * follows the R10K's provisions for specifying uncached attributes; - * should this change, the base registers may very well become processor- - * dependent. - * - * For more information on the address spaces, see the "Local Resources" - * chapter of the Hub specification. - * - * NOTE: This header file is included both by C and by assembler source - * files. Please bracket any language-dependent definitions - * appropriately. - */ - -/* - * Some of the macros here need to be casted to appropriate types when used - * from C. They definitely must not be casted from assembly language so we - * use some new ANSI preprocessor stuff to paste these on where needed. - */ - -/* - * The following couple of definitions will eventually need to be variables, - * since the amount of address space assigned to each node depends on - * whether the system is running in N-mode (more nodes with less memory) - * or M-mode (fewer nodes with more memory). We expect that it will - * be a while before we need to make this decision dynamically, though, - * so for now we just use defines bracketed by an ifdef. - */ - -#ifdef CONFIG_SGI_SN_N_MODE - -#define NODE_SIZE_BITS 31 -#define BWIN_SIZE_BITS 28 - -#define NASID_BITS 9 -#define NASID_BITMASK (0x1ffLL) -#define NASID_SHFT 31 -#define NASID_META_BITS 5 -#define NASID_LOCAL_BITS 4 - -#define BDDIR_UPPER_MASK (UINT64_CAST 0x7ffff << 10) -#define BDECC_UPPER_MASK (UINT64_CAST 0x3ffffff << 3) - -#else /* !defined(CONFIG_SGI_SN_N_MODE), assume that M-mode is desired */ - -#define NODE_SIZE_BITS 32 -#define BWIN_SIZE_BITS 29 - -#define NASID_BITMASK (0xffLL) -#define NASID_BITS 8 -#define NASID_SHFT 32 -#define NASID_META_BITS 4 -#define NASID_LOCAL_BITS 4 - -#define BDDIR_UPPER_MASK (UINT64_CAST 0xfffff << 10) -#define BDECC_UPPER_MASK (UINT64_CAST 0x7ffffff << 3) - -#endif /* !defined(CONFIG_SGI_SN_N_MODE) */ - -#define NODE_ADDRSPACE_SIZE (UINT64_CAST 1 << NODE_SIZE_BITS) - -#define NASID_MASK (UINT64_CAST NASID_BITMASK << NASID_SHFT) -#define NASID_GET(_pa) (int) ((UINT64_CAST (_pa) >> \ - NASID_SHFT) & NASID_BITMASK) - -#if !defined(__ASSEMBLY__) - -#define NODE_SWIN_BASE(nasid, widget) \ - ((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN) \ - : RAW_NODE_SWIN_BASE(nasid, widget)) -#else /* __ASSEMBLY__ */ -#define NODE_SWIN_BASE(nasid, widget) \ - (NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS)) -#endif /* __ASSEMBLY__ */ - -/* - * The following definitions pertain to the IO special address - * space. They define the location of the big and little windows - * of any given node. - */ - -#define BWIN_INDEX_BITS 3 -#define BWIN_SIZE (UINT64_CAST 1 << BWIN_SIZE_BITS) -#define BWIN_SIZEMASK (BWIN_SIZE - 1) -#define BWIN_WIDGET_MASK 0x7 -#define NODE_BWIN_BASE0(nasid) (NODE_IO_BASE(nasid) + BWIN_SIZE) -#define NODE_BWIN_BASE(nasid, bigwin) (NODE_BWIN_BASE0(nasid) + \ - (UINT64_CAST(bigwin) << BWIN_SIZE_BITS)) - -#define BWIN_WIDGETADDR(addr) ((addr) & BWIN_SIZEMASK) -#define BWIN_WINDOWNUM(addr) (((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK) -/* - * Verify if addr belongs to large window address of node with "nasid" - * - * - * NOTE: "addr" is expected to be XKPHYS address, and NOT physical - * address - * - * - */ - -#define NODE_BWIN_ADDR(nasid, addr) \ - (((addr) >= NODE_BWIN_BASE0(nasid)) && \ - ((addr) < (NODE_BWIN_BASE(nasid, HUB_NUM_BIG_WINDOW) + \ - BWIN_SIZE))) - -/* - * The following define the major position-independent aliases used - * in SN0. - * CALIAS -- Varies in size, points to the first n bytes of memory - * on the reader's node. - */ - -#define CALIAS_BASE CAC_BASE - - - -#define BRIDGE_REG_PTR(_base, _off) ((volatile bridgereg_t *) \ - ((__psunsigned_t)(_base) + (__psunsigned_t)(_off))) - -#define SN0_WIDGET_BASE(_nasid, _wid) (NODE_SWIN_BASE((_nasid), (_wid))) - -/* Turn on sable logging for the processors whose bits are set. */ -#define SABLE_LOG_TRIGGER(_map) - -#ifndef __ASSEMBLY__ -#define KERN_NMI_ADDR(nasid, slice) \ - TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + \ - (IP27_NMI_KREGS_CPU_SIZE * (slice))) -#endif /* !__ASSEMBLY__ */ - -#ifdef PROM - -#define MISC_PROM_BASE PHYS_TO_K0(0x01300000) -#define MISC_PROM_SIZE 0x200000 - -#define DIAG_BASE PHYS_TO_K0(0x01500000) -#define DIAG_SIZE 0x300000 - -#define ROUTE_BASE PHYS_TO_K0(0x01800000) -#define ROUTE_SIZE 0x200000 - -#define IP27PROM_FLASH_HDR PHYS_TO_K0(0x01300000) -#define IP27PROM_FLASH_DATA PHYS_TO_K0(0x01301000) -#define IP27PROM_CORP_MAX 32 -#define IP27PROM_CORP PHYS_TO_K0(0x01800000) -#define IP27PROM_CORP_SIZE 0x10000 -#define IP27PROM_CORP_STK PHYS_TO_K0(0x01810000) -#define IP27PROM_CORP_STKSIZE 0x2000 -#define IP27PROM_DECOMP_BUF PHYS_TO_K0(0x01900000) -#define IP27PROM_DECOMP_SIZE 0xfff00 - -#define IP27PROM_BASE PHYS_TO_K0(0x01a00000) -#define IP27PROM_BASE_MAPPED (UNCAC_BASE | 0x1fc00000) -#define IP27PROM_SIZE_MAX 0x100000 - -#define IP27PROM_PCFG PHYS_TO_K0(0x01b00000) -#define IP27PROM_PCFG_SIZE 0xd0000 -#define IP27PROM_ERRDMP PHYS_TO_K1(0x01bd0000) -#define IP27PROM_ERRDMP_SIZE 0xf000 - -#define IP27PROM_INIT_START PHYS_TO_K1(0x01bd0000) -#define IP27PROM_CONSOLE PHYS_TO_K1(0x01bdf000) -#define IP27PROM_CONSOLE_SIZE 0x200 -#define IP27PROM_NETUART PHYS_TO_K1(0x01bdf200) -#define IP27PROM_NETUART_SIZE 0x100 -#define IP27PROM_UNUSED1 PHYS_TO_K1(0x01bdf300) -#define IP27PROM_UNUSED1_SIZE 0x500 -#define IP27PROM_ELSC_BASE_A PHYS_TO_K0(0x01bdf800) -#define IP27PROM_ELSC_BASE_B PHYS_TO_K0(0x01bdfc00) -#define IP27PROM_STACK_A PHYS_TO_K0(0x01be0000) -#define IP27PROM_STACK_B PHYS_TO_K0(0x01bf0000) -#define IP27PROM_STACK_SHFT 16 -#define IP27PROM_STACK_SIZE (1 << IP27PROM_STACK_SHFT) -#define IP27PROM_INIT_END PHYS_TO_K0(0x01c00000) - -#define SLAVESTACK_BASE PHYS_TO_K0(0x01580000) -#define SLAVESTACK_SIZE 0x40000 - -#define ENETBUFS_BASE PHYS_TO_K0(0x01f80000) -#define ENETBUFS_SIZE 0x20000 - -#define IO6PROM_BASE PHYS_TO_K0(0x01c00000) -#define IO6PROM_SIZE 0x400000 -#define IO6PROM_BASE_MAPPED (UNCAC_BASE | 0x11c00000) -#define IO6DPROM_BASE PHYS_TO_K0(0x01c00000) -#define IO6DPROM_SIZE 0x200000 - -#define NODEBUGUNIX_ADDR PHYS_TO_K0(0x00019000) -#define DEBUGUNIX_ADDR PHYS_TO_K0(0x00100000) - -#define IP27PROM_INT_LAUNCH 10 /* and 11 */ -#define IP27PROM_INT_NETUART 12 /* through 17 */ - -#endif /* PROM */ - -/* - * needed by symmon so it needs to be outside #if PROM - */ -#define IP27PROM_ELSC_SHFT 10 -#define IP27PROM_ELSC_SIZE (1 << IP27PROM_ELSC_SHFT) - -/* - * This address is used by IO6PROM to build MemoryDescriptors of - * free memory. This address is important since unix gets loaded - * at this address, and this memory has to be FREE if unix is to - * be loaded. - */ - -#define FREEMEM_BASE PHYS_TO_K0(0x2000000) - -#define IO6PROM_STACK_SHFT 14 /* stack per cpu */ -#define IO6PROM_STACK_SIZE (1 << IO6PROM_STACK_SHFT) - -/* - * IP27 PROM vectors - */ - -#define IP27PROM_ENTRY PHYS_TO_COMPATK1(0x1fc00000) -#define IP27PROM_RESTART PHYS_TO_COMPATK1(0x1fc00008) -#define IP27PROM_SLAVELOOP PHYS_TO_COMPATK1(0x1fc00010) -#define IP27PROM_PODMODE PHYS_TO_COMPATK1(0x1fc00018) -#define IP27PROM_IOC3UARTPOD PHYS_TO_COMPATK1(0x1fc00020) -#define IP27PROM_FLASHLEDS PHYS_TO_COMPATK1(0x1fc00028) -#define IP27PROM_REPOD PHYS_TO_COMPATK1(0x1fc00030) -#define IP27PROM_LAUNCHSLAVE PHYS_TO_COMPATK1(0x1fc00038) -#define IP27PROM_WAITSLAVE PHYS_TO_COMPATK1(0x1fc00040) -#define IP27PROM_POLLSLAVE PHYS_TO_COMPATK1(0x1fc00048) - -#define KL_UART_BASE LOCAL_HUB_ADDR(MD_UREG0_0) /* base of UART regs */ -#define KL_UART_CMD LOCAL_HUB_ADDR(MD_UREG0_0) /* UART command reg */ -#define KL_UART_DATA LOCAL_HUB_ADDR(MD_UREG0_1) /* UART data reg */ -#define KL_I2C_REG MD_UREG0_0 /* I2C reg */ - -#ifndef __ASSEMBLY__ - -/* Address 0x400 to 0x1000 ualias points to cache error eframe + misc - * CACHE_ERR_SP_PTR could either contain an address to the stack, or - * the stack could start at CACHE_ERR_SP_PTR - */ -#if defined(HUB_ERR_STS_WAR) -#define CACHE_ERR_EFRAME 0x480 -#else /* HUB_ERR_STS_WAR */ -#define CACHE_ERR_EFRAME 0x400 -#endif /* HUB_ERR_STS_WAR */ - -#define CACHE_ERR_ECCFRAME (CACHE_ERR_EFRAME + EF_SIZE) -#define CACHE_ERR_SP_PTR (0x1000 - 32) /* why -32? TBD */ -#define CACHE_ERR_IBASE_PTR (0x1000 - 40) -#define CACHE_ERR_SP (CACHE_ERR_SP_PTR - 16) -#define CACHE_ERR_AREA_SIZE (ARCS_SPB_OFFSET - CACHE_ERR_EFRAME) - -#endif /* !__ASSEMBLY__ */ - -#define _ARCSPROM - -#if defined(HUB_ERR_STS_WAR) - -#define ERR_STS_WAR_REGISTER IIO_IIBUSERR -#define ERR_STS_WAR_ADDR LOCAL_HUB_ADDR(IIO_IIBUSERR) -#define ERR_STS_WAR_PHYSADDR TO_PHYS((__psunsigned_t)ERR_STS_WAR_ADDR) - /* Used to match addr in error reg. */ -#define OLD_ERR_STS_WAR_OFFSET ((MD_MEM_BANKS * MD_BANK_SIZE) - 0x100) - -#endif /* HUB_ERR_STS_WAR */ - -#endif /* _ASM_SN_SN0_ADDRS_H */ diff --git a/include/asm-mips/sn/sn0/arch.h b/include/asm-mips/sn/sn0/arch.h deleted file mode 100644 index f734f2007f24..000000000000 --- a/include/asm-mips/sn/sn0/arch.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * SGI IP27 specific setup. - * - * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc. - * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) - */ -#ifndef _ASM_SN_SN0_ARCH_H -#define _ASM_SN_SN0_ARCH_H - - -#ifndef SN0XXL /* 128 cpu SMP max */ -/* - * This is the maximum number of nodes that can be part of a kernel. - * Effectively, it's the maximum number of compact node ids (cnodeid_t). - */ -#define MAX_COMPACT_NODES 64 - -/* - * MAXCPUS refers to the maximum number of CPUs in a single kernel. - * This is not necessarily the same as MAXNODES * CPUS_PER_NODE - */ -#define MAXCPUS 128 - -#else /* SN0XXL system */ - -#define MAX_COMPACT_NODES 128 -#define MAXCPUS 256 - -#endif /* SN0XXL */ - -/* - * This is the maximum number of NASIDS that can be present in a system. - * (Highest NASID plus one.) - */ -#define MAX_NASIDS 256 - -/* - * MAX_REGIONS refers to the maximum number of hardware partitioned regions. - */ -#define MAX_REGIONS 64 -#define MAX_NONPREMIUM_REGIONS 16 -#define MAX_PREMIUM_REGIONS MAX_REGIONS - -/* - * MAX_PARITIONS refers to the maximum number of logically defined - * partitions the system can support. - */ -#define MAX_PARTITIONS MAX_REGIONS - -#define NASID_MASK_BYTES ((MAX_NASIDS + 7) / 8) - -/* - * Slot constants for SN0 - */ -#ifdef CONFIG_SGI_SN_N_MODE -#define MAX_MEM_SLOTS 16 /* max slots per node */ -#else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */ -#define MAX_MEM_SLOTS 32 /* max slots per node */ -#endif /* CONFIG_SGI_SN_M_MODE */ - -#define SLOT_SHIFT (27) -#define SLOT_MIN_MEM_SIZE (32*1024*1024) - -#define CPUS_PER_NODE 2 /* CPUs on a single hub */ -#define CPUS_PER_NODE_SHFT 1 /* Bits to shift in the node number */ -#define CPUS_PER_SUBNODE 2 /* CPUs on a single hub PI */ - -#endif /* _ASM_SN_SN0_ARCH_H */ diff --git a/include/asm-mips/sn/sn0/hub.h b/include/asm-mips/sn/sn0/hub.h deleted file mode 100644 index 3e228f8e7969..000000000000 --- a/include/asm-mips/sn/sn0/hub.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. - * Copyright (C) 1999 by Ralf Baechle - */ -#ifndef _ASM_SN_SN0_HUB_H -#define _ASM_SN_SN0_HUB_H - -/* The secret password; used to release protection */ -#define HUB_PASSWORD 0x53474972756c6573ull - -#define CHIPID_HUB 0 -#define CHIPID_ROUTER 1 - -#define HUB_REV_1_0 1 -#define HUB_REV_2_0 2 -#define HUB_REV_2_1 3 -#define HUB_REV_2_2 4 -#define HUB_REV_2_3 5 -#define HUB_REV_2_4 6 - -#define MAX_HUB_PATH 80 - -#include -#include -#include -#include -#include -//#include - -/* Translation of uncached attributes */ -#define UATTR_HSPEC 0 -#define UATTR_IO 1 -#define UATTR_MSPEC 2 -#define UATTR_UNCAC 3 - -#endif /* _ASM_SN_SN0_HUB_H */ diff --git a/include/asm-mips/sn/sn0/hubio.h b/include/asm-mips/sn/sn0/hubio.h deleted file mode 100644 index 0187895e556c..000000000000 --- a/include/asm-mips/sn/sn0/hubio.h +++ /dev/null @@ -1,972 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from IRIX , Revision 1.80. - * - * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. - * Copyright (C) 1999 by Ralf Baechle - */ -#ifndef _ASM_SGI_SN_SN0_HUBIO_H -#define _ASM_SGI_SN_SN0_HUBIO_H - -/* - * Hub I/O interface registers - * - * All registers in this file are subject to change until Hub chip tapeout. - * In general, the longer software name should be used when available. - */ - -/* - * Slightly friendlier names for some common registers. - * The hardware definitions follow. - */ -#define IIO_WIDGET IIO_WID /* Widget identification */ -#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */ -#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */ -#define IIO_WIDGET_TOUT IIO_WRTO /* Widget request timeout */ -#define IIO_WIDGET_FLUSH IIO_WTFR /* Widget target flush */ -#define IIO_PROTECT IIO_ILAPR /* IO interface protection */ -#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */ -#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */ -#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */ -#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */ -#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */ -#define IIO_LLP_LOG IIO_ILLR /* LLP log */ -#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout*/ -#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */ -#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */ -#define IIO_BTE_CRB_CNT IIO_IBCN /* IO BTE CRB count */ - -#define IIO_LLP_CSR_IS_UP 0x00002000 -#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000 -#define IIO_LLP_CSR_LLP_STAT_SHFT 12 - -/* key to IIO_PROTECT_OVRRD */ -#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */ - -/* BTE register names */ -#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */ -#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */ -#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */ -#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */ -#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */ -#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */ -#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */ -#define IIO_BTE_OFF_1 IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */ - -/* BTE register offsets from base */ -#define BTEOFF_STAT 0 -#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0) -#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0) -#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0) -#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0) -#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0) - - -/* - * The following definitions use the names defined in the IO interface - * document for ease of reference. When possible, software should - * generally use the longer but clearer names defined above. - */ - -#define IIO_BASE 0x400000 -#define IIO_BASE_BTE0 0x410000 -#define IIO_BASE_BTE1 0x420000 -#define IIO_BASE_PERF 0x430000 -#define IIO_PERF_CNT 0x430008 - -#define IO_PERF_SETS 32 - -#define IIO_WID 0x400000 /* Widget identification */ -#define IIO_WSTAT 0x400008 /* Widget status */ -#define IIO_WCR 0x400020 /* Widget control */ - -#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */ -#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */ -#define IIO_WSTAT_TXRETRY_MASK (0x7F) -#define IIO_WSTAT_TXRETRY_SHFT (16) -#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \ - IIO_WSTAT_TXRETRY_MASK) - -#define IIO_ILAPR 0x400100 /* Local Access Protection */ -#define IIO_ILAPO 0x400108 /* Protection override */ -#define IIO_IOWA 0x400110 /* outbound widget access */ -#define IIO_IIWA 0x400118 /* inbound widget access */ -#define IIO_IIDEM 0x400120 /* Inbound Device Error Mask */ -#define IIO_ILCSR 0x400128 /* LLP control and status */ -#define IIO_ILLR 0x400130 /* LLP Log */ -#define IIO_IIDSR 0x400138 /* Interrupt destination */ - -#define IIO_IIBUSERR 0x1400208 /* Reads here cause a bus error. */ - -/* IO Interrupt Destination Register */ -#define IIO_IIDSR_SENT_SHIFT 28 -#define IIO_IIDSR_SENT_MASK 0x10000000 -#define IIO_IIDSR_ENB_SHIFT 24 -#define IIO_IIDSR_ENB_MASK 0x01000000 -#define IIO_IIDSR_NODE_SHIFT 8 -#define IIO_IIDSR_NODE_MASK 0x0000ff00 -#define IIO_IIDSR_LVL_SHIFT 0 -#define IIO_IIDSR_LVL_MASK 0x0000003f - - -/* GFX Flow Control Node/Widget Register */ -#define IIO_IGFX_0 0x400140 /* gfx node/widget register 0 */ -#define IIO_IGFX_1 0x400148 /* gfx node/widget register 1 */ -#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */ -#define IIO_IGFX_W_NUM_MASK ((1<, revision 1.59. - * - * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. - * Copyright (C) 1999 by Ralf Baechle - */ -#ifndef _ASM_SN_SN0_HUBMD_H -#define _ASM_SN_SN0_HUBMD_H - - -/* - * Hub Memory/Directory interface registers - */ -#define CACHE_SLINE_SIZE 128 /* Secondary cache line size on SN0 */ - -#define MAX_REGIONS 64 - -/* Hardware page size and shift */ - -#define MD_PAGE_SIZE 4096 /* Page size in bytes */ -#define MD_PAGE_NUM_SHFT 12 /* Address to page number shift */ - -/* Register offsets from LOCAL_HUB or REMOTE_HUB */ - -#define MD_BASE 0x200000 -#define MD_BASE_PERF 0x210000 -#define MD_BASE_JUNK 0x220000 - -#define MD_IO_PROTECT 0x200000 /* MD and core register protection */ -#define MD_IO_PROT_OVRRD 0x200008 /* Clear my bit in MD_IO_PROTECT */ -#define MD_HSPEC_PROTECT 0x200010 /* BDDIR, LBOOT, RBOOT protection */ -#define MD_MEMORY_CONFIG 0x200018 /* Memory/Directory DIMM control */ -#define MD_REFRESH_CONTROL 0x200020 /* Memory/Directory refresh ctrl */ -#define MD_FANDOP_CAC_STAT 0x200028 /* Fetch-and-op cache status */ -#define MD_MIG_DIFF_THRESH 0x200030 /* Page migr. count diff thresh. */ -#define MD_MIG_VALUE_THRESH 0x200038 /* Page migr. count abs. thresh. */ -#define MD_MIG_CANDIDATE 0x200040 /* Latest page migration candidate */ -#define MD_MIG_CANDIDATE_CLR 0x200048 /* Clear page migration candidate */ -#define MD_DIR_ERROR 0x200050 /* Directory DIMM error */ -#define MD_DIR_ERROR_CLR 0x200058 /* Directory DIMM error clear */ -#define MD_PROTOCOL_ERROR 0x200060 /* Directory protocol error */ -#define MD_PROTOCOL_ERROR_CLR 0x200068 /* Directory protocol error clear */ -#define MD_MEM_ERROR 0x200070 /* Memory DIMM error */ -#define MD_MEM_ERROR_CLR 0x200078 /* Memory DIMM error clear */ -#define MD_MISC_ERROR 0x200080 /* Miscellaneous MD error */ -#define MD_MISC_ERROR_CLR 0x200088 /* Miscellaneous MD error clear */ -#define MD_MEM_DIMM_INIT 0x200090 /* Memory DIMM mode initization. */ -#define MD_DIR_DIMM_INIT 0x200098 /* Directory DIMM mode init. */ -#define MD_MOQ_SIZE 0x2000a0 /* MD outgoing queue size */ -#define MD_MLAN_CTL 0x2000a8 /* NIC (Microlan) control register */ - -#define MD_PERF_SEL 0x210000 /* Select perf monitor events */ -#define MD_PERF_CNT0 0x210010 /* Performance counter 0 */ -#define MD_PERF_CNT1 0x210018 /* Performance counter 1 */ -#define MD_PERF_CNT2 0x210020 /* Performance counter 2 */ -#define MD_PERF_CNT3 0x210028 /* Performance counter 3 */ -#define MD_PERF_CNT4 0x210030 /* Performance counter 4 */ -#define MD_PERF_CNT5 0x210038 /* Performance counter 5 */ - -#define MD_UREG0_0 0x220000 /* uController/UART 0 register */ -#define MD_UREG0_1 0x220008 /* uController/UART 0 register */ -#define MD_UREG0_2 0x220010 /* uController/UART 0 register */ -#define MD_UREG0_3 0x220018 /* uController/UART 0 register */ -#define MD_UREG0_4 0x220020 /* uController/UART 0 register */ -#define MD_UREG0_5 0x220028 /* uController/UART 0 register */ -#define MD_UREG0_6 0x220030 /* uController/UART 0 register */ -#define MD_UREG0_7 0x220038 /* uController/UART 0 register */ - -#define MD_SLOTID_USTAT 0x220048 /* Hub slot ID & UART/uCtlr status */ -#define MD_LED0 0x220050 /* Eight-bit LED for CPU A */ -#define MD_LED1 0x220058 /* Eight-bit LED for CPU B */ - -#define MD_UREG1_0 0x220080 /* uController/UART 1 register */ -#define MD_UREG1_1 0x220088 /* uController/UART 1 register */ -#define MD_UREG1_2 0x220090 /* uController/UART 1 register */ -#define MD_UREG1_3 0x220098 /* uController/UART 1 register */ -#define MD_UREG1_4 0x2200a0 /* uController/UART 1 register */ -#define MD_UREG1_5 0x2200a8 /* uController/UART 1 register */ -#define MD_UREG1_6 0x2200b0 /* uController/UART 1 register */ -#define MD_UREG1_7 0x2200b8 /* uController/UART 1 register */ -#define MD_UREG1_8 0x2200c0 /* uController/UART 1 register */ -#define MD_UREG1_9 0x2200c8 /* uController/UART 1 register */ -#define MD_UREG1_10 0x2200d0 /* uController/UART 1 register */ -#define MD_UREG1_11 0x2200d8 /* uController/UART 1 register */ -#define MD_UREG1_12 0x2200e0 /* uController/UART 1 register */ -#define MD_UREG1_13 0x2200e8 /* uController/UART 1 register */ -#define MD_UREG1_14 0x2200f0 /* uController/UART 1 register */ -#define MD_UREG1_15 0x2200f8 /* uController/UART 1 register */ - -#ifdef CONFIG_SGI_SN_N_MODE -#define MD_MEM_BANKS 4 /* 4 banks of memory max in N mode */ -#else -#define MD_MEM_BANKS 8 /* 8 banks of memory max in M mode */ -#endif - -/* - * MD_MEMORY_CONFIG fields - * - * MD_SIZE_xxx are useful for representing the size of a SIMM or bank - * (SIMM pair). They correspond to the values needed for the bit - * triplets (MMC_BANK_MASK) in the MD_MEMORY_CONFIG register for bank size. - * Bits not used by the MD are used by software. - */ - -#define MD_SIZE_EMPTY 0 /* Valid in MEMORY_CONFIG */ -#define MD_SIZE_8MB 1 -#define MD_SIZE_16MB 2 -#define MD_SIZE_32MB 3 /* Broken in Hub 1 */ -#define MD_SIZE_64MB 4 /* Valid in MEMORY_CONFIG */ -#define MD_SIZE_128MB 5 /* Valid in MEMORY_CONFIG */ -#define MD_SIZE_256MB 6 -#define MD_SIZE_512MB 7 /* Valid in MEMORY_CONFIG */ -#define MD_SIZE_1GB 8 -#define MD_SIZE_2GB 9 -#define MD_SIZE_4GB 10 - -#define MD_SIZE_BYTES(size) ((size) == 0 ? 0 : 0x400000L << (size)) -#define MD_SIZE_MBYTES(size) ((size) == 0 ? 0 : 4 << (size)) - -#define MMC_FPROM_CYC_SHFT 49 /* Have to use UINT64_CAST, instead */ -#define MMC_FPROM_CYC_MASK (UINT64_CAST 31 << 49) /* of 'L' suffix, */ -#define MMC_FPROM_WR_SHFT 44 /* for assembler */ -#define MMC_FPROM_WR_MASK (UINT64_CAST 31 << 44) -#define MMC_UCTLR_CYC_SHFT 39 -#define MMC_UCTLR_CYC_MASK (UINT64_CAST 31 << 39) -#define MMC_UCTLR_WR_SHFT 34 -#define MMC_UCTLR_WR_MASK (UINT64_CAST 31 << 34) -#define MMC_DIMM0_SEL_SHFT 32 -#define MMC_DIMM0_SEL_MASK (UINT64_CAST 3 << 32) -#define MMC_IO_PROT_EN_SHFT 31 -#define MMC_IO_PROT_EN_MASK (UINT64_CAST 1 << 31) -#define MMC_IO_PROT (UINT64_CAST 1 << 31) -#define MMC_ARB_MLSS_SHFT 30 -#define MMC_ARB_MLSS_MASK (UINT64_CAST 1 << 30) -#define MMC_ARB_MLSS (UINT64_CAST 1 << 30) -#define MMC_IGNORE_ECC_SHFT 29 -#define MMC_IGNORE_ECC_MASK (UINT64_CAST 1 << 29) -#define MMC_IGNORE_ECC (UINT64_CAST 1 << 29) -#define MMC_DIR_PREMIUM_SHFT 28 -#define MMC_DIR_PREMIUM_MASK (UINT64_CAST 1 << 28) -#define MMC_DIR_PREMIUM (UINT64_CAST 1 << 28) -#define MMC_REPLY_GUAR_SHFT 24 -#define MMC_REPLY_GUAR_MASK (UINT64_CAST 15 << 24) -#define MMC_BANK_SHFT(_b) ((_b) * 3) -#define MMC_BANK_MASK(_b) (UINT64_CAST 7 << MMC_BANK_SHFT(_b)) -#define MMC_BANK_ALL_MASK 0xffffff -#define MMC_RESET_DEFAULTS (UINT64_CAST 0x0f << MMC_FPROM_CYC_SHFT | \ - UINT64_CAST 0x07 << MMC_FPROM_WR_SHFT | \ - UINT64_CAST 0x1f << MMC_UCTLR_CYC_SHFT | \ - UINT64_CAST 0x0f << MMC_UCTLR_WR_SHFT | \ - MMC_IGNORE_ECC | MMC_DIR_PREMIUM | \ - UINT64_CAST 0x0f << MMC_REPLY_GUAR_SHFT | \ - MMC_BANK_ALL_MASK) - -/* MD_REFRESH_CONTROL fields */ - -#define MRC_ENABLE_SHFT 63 -#define MRC_ENABLE_MASK (UINT64_CAST 1 << 63) -#define MRC_ENABLE (UINT64_CAST 1 << 63) -#define MRC_COUNTER_SHFT 12 -#define MRC_COUNTER_MASK (UINT64_CAST 0xfff << 12) -#define MRC_CNT_THRESH_MASK 0xfff -#define MRC_RESET_DEFAULTS (UINT64_CAST 0x400) - -/* MD_MEM_DIMM_INIT and MD_DIR_DIMM_INIT fields */ - -#define MDI_SELECT_SHFT 32 -#define MDI_SELECT_MASK (UINT64_CAST 0x0f << 32) -#define MDI_DIMM_MODE_MASK (UINT64_CAST 0xfff) - -/* MD_MOQ_SIZE fields */ - -#define MMS_RP_SIZE_SHFT 8 -#define MMS_RP_SIZE_MASK (UINT64_CAST 0x3f << 8) -#define MMS_RQ_SIZE_SHFT 0 -#define MMS_RQ_SIZE_MASK (UINT64_CAST 0x1f) -#define MMS_RESET_DEFAULTS (0x32 << 8 | 0x12) - -/* MD_FANDOP_CAC_STAT fields */ - -#define MFC_VALID_SHFT 63 -#define MFC_VALID_MASK (UINT64_CAST 1 << 63) -#define MFC_VALID (UINT64_CAST 1 << 63) -#define MFC_ADDR_SHFT 6 -#define MFC_ADDR_MASK (UINT64_CAST 0x3ffffff) - -/* MD_MLAN_CTL fields */ - -#define MLAN_PHI1_SHFT 27 -#define MLAN_PHI1_MASK (UINT64_CAST 0x7f << 27) -#define MLAN_PHI0_SHFT 20 -#define MLAN_PHI0_MASK (UINT64_CAST 0x7f << 27) -#define MLAN_PULSE_SHFT 10 -#define MLAN_PULSE_MASK (UINT64_CAST 0x3ff << 10) -#define MLAN_SAMPLE_SHFT 2 -#define MLAN_SAMPLE_MASK (UINT64_CAST 0xff << 2) -#define MLAN_DONE_SHFT 1 -#define MLAN_DONE_MASK 2 -#define MLAN_DONE (UINT64_CAST 0x02) -#define MLAN_RD_DATA (UINT64_CAST 0x01) -#define MLAN_RESET_DEFAULTS (UINT64_CAST 0x31 << MLAN_PHI1_SHFT | \ - UINT64_CAST 0x31 << MLAN_PHI0_SHFT) - -/* MD_SLOTID_USTAT bit definitions */ - -#define MSU_CORECLK_TST_SHFT 7 /* You don't wanna know */ -#define MSU_CORECLK_TST_MASK (UINT64_CAST 1 << 7) -#define MSU_CORECLK_TST (UINT64_CAST 1 << 7) -#define MSU_CORECLK_SHFT 6 /* You don't wanna know */ -#define MSU_CORECLK_MASK (UINT64_CAST 1 << 6) -#define MSU_CORECLK (UINT64_CAST 1 << 6) -#define MSU_NETSYNC_SHFT 5 /* You don't wanna know */ -#define MSU_NETSYNC_MASK (UINT64_CAST 1 << 5) -#define MSU_NETSYNC (UINT64_CAST 1 << 5) -#define MSU_FPROMRDY_SHFT 4 /* Flash PROM ready bit */ -#define MSU_FPROMRDY_MASK (UINT64_CAST 1 << 4) -#define MSU_FPROMRDY (UINT64_CAST 1 << 4) -#define MSU_I2CINTR_SHFT 3 /* I2C interrupt bit */ -#define MSU_I2CINTR_MASK (UINT64_CAST 1 << 3) -#define MSU_I2CINTR (UINT64_CAST 1 << 3) -#define MSU_SLOTID_MASK 0xff -#define MSU_SN0_SLOTID_SHFT 0 /* Slot ID */ -#define MSU_SN0_SLOTID_MASK (UINT64_CAST 7) -#define MSU_SN00_SLOTID_SHFT 7 -#define MSU_SN00_SLOTID_MASK (UINT64_CAST 0x80) - -#define MSU_PIMM_PSC_SHFT 4 -#define MSU_PIMM_PSC_MASK (0xf << MSU_PIMM_PSC_SHFT) - -/* MD_MIG_DIFF_THRESH bit definitions */ - -#define MD_MIG_DIFF_THRES_VALID_MASK (UINT64_CAST 0x1 << 63) -#define MD_MIG_DIFF_THRES_VALID_SHFT 63 -#define MD_MIG_DIFF_THRES_VALUE_MASK (UINT64_CAST 0xfffff) - -/* MD_MIG_VALUE_THRESH bit definitions */ - -#define MD_MIG_VALUE_THRES_VALID_MASK (UINT64_CAST 0x1 << 63) -#define MD_MIG_VALUE_THRES_VALID_SHFT 63 -#define MD_MIG_VALUE_THRES_VALUE_MASK (UINT64_CAST 0xfffff) - -/* MD_MIG_CANDIDATE bit definitions */ - -#define MD_MIG_CANDIDATE_VALID_MASK (UINT64_CAST 0x1 << 63) -#define MD_MIG_CANDIDATE_VALID_SHFT 63 -#define MD_MIG_CANDIDATE_TYPE_MASK (UINT64_CAST 0x1 << 30) -#define MD_MIG_CANDIDATE_TYPE_SHFT 30 -#define MD_MIG_CANDIDATE_OVERRUN_MASK (UINT64_CAST 0x1 << 29) -#define MD_MIG_CANDIDATE_OVERRUN_SHFT 29 -#define MD_MIG_CANDIDATE_INITIATOR_MASK (UINT64_CAST 0x7ff << 18) -#define MD_MIG_CANDIDATE_INITIATOR_SHFT 18 -#define MD_MIG_CANDIDATE_NODEID_MASK (UINT64_CAST 0x1ff << 20) -#define MD_MIG_CANDIDATE_NODEID_SHFT 20 -#define MD_MIG_CANDIDATE_ADDR_MASK (UINT64_CAST 0x3ffff) -#define MD_MIG_CANDIDATE_ADDR_SHFT 14 /* The address starts at bit 14 */ - -/* Other MD definitions */ - -#define MD_BANK_SHFT 29 /* log2(512 MB) */ -#define MD_BANK_MASK (UINT64_CAST 7 << 29) -#define MD_BANK_SIZE (UINT64_CAST 1 << MD_BANK_SHFT) /* 512 MB */ -#define MD_BANK_OFFSET(_b) (UINT64_CAST (_b) << MD_BANK_SHFT) - -/* - * The following definitions cover the bit field definitions for the - * various MD registers. For multi-bit registers, we define both - * a shift amount and a mask value. By convention, if you want to - * isolate a field, you should mask the field and then shift it down, - * since this makes the masks useful without a shift. - */ - -/* Directory entry states for both premium and standard SIMMs. */ - -#define MD_DIR_SHARED (UINT64_CAST 0x0) /* 000 */ -#define MD_DIR_POISONED (UINT64_CAST 0x1) /* 001 */ -#define MD_DIR_EXCLUSIVE (UINT64_CAST 0x2) /* 010 */ -#define MD_DIR_BUSY_SHARED (UINT64_CAST 0x3) /* 011 */ -#define MD_DIR_BUSY_EXCL (UINT64_CAST 0x4) /* 100 */ -#define MD_DIR_WAIT (UINT64_CAST 0x5) /* 101 */ -#define MD_DIR_UNOWNED (UINT64_CAST 0x7) /* 111 */ - -/* - * The MD_DIR_FORCE_ECC bit can be added directory entry write data - * to forcing the ECC to be written as-is instead of recalculated. - */ - -#define MD_DIR_FORCE_ECC (UINT64_CAST 1 << 63) - -/* - * Premium SIMM directory entry shifts and masks. Each is valid only in the - * context(s) indicated, where A, B, and C indicate the directory entry format - * as shown, and low and/or high indicates which double-word of the entry. - * - * Format A: STATE = shared, FINE = 1 - * Format B: STATE = shared, FINE = 0 - * Format C: STATE != shared (FINE must be 0) - */ - -#define MD_PDIR_MASK 0xffffffffffff /* Whole entry */ -#define MD_PDIR_ECC_SHFT 0 /* ABC low or high */ -#define MD_PDIR_ECC_MASK 0x7f -#define MD_PDIR_PRIO_SHFT 8 /* ABC low */ -#define MD_PDIR_PRIO_MASK (0xf << 8) -#define MD_PDIR_AX_SHFT 7 /* ABC low */ -#define MD_PDIR_AX_MASK (1 << 7) -#define MD_PDIR_AX (1 << 7) -#define MD_PDIR_FINE_SHFT 12 /* ABC low */ -#define MD_PDIR_FINE_MASK (1 << 12) -#define MD_PDIR_FINE (1 << 12) -#define MD_PDIR_OCT_SHFT 13 /* A low */ -#define MD_PDIR_OCT_MASK (7 << 13) -#define MD_PDIR_STATE_SHFT 13 /* BC low */ -#define MD_PDIR_STATE_MASK (7 << 13) -#define MD_PDIR_ONECNT_SHFT 16 /* BC low */ -#define MD_PDIR_ONECNT_MASK (0x3f << 16) -#define MD_PDIR_PTR_SHFT 22 /* C low */ -#define MD_PDIR_PTR_MASK (UINT64_CAST 0x7ff << 22) -#define MD_PDIR_VECMSB_SHFT 22 /* AB low */ -#define MD_PDIR_VECMSB_BITMASK 0x3ffffff -#define MD_PDIR_VECMSB_BITSHFT 27 -#define MD_PDIR_VECMSB_MASK (UINT64_CAST MD_PDIR_VECMSB_BITMASK << 22) -#define MD_PDIR_CWOFF_SHFT 7 /* C high */ -#define MD_PDIR_CWOFF_MASK (7 << 7) -#define MD_PDIR_VECLSB_SHFT 10 /* AB high */ -#define MD_PDIR_VECLSB_BITMASK (UINT64_CAST 0x3fffffffff) -#define MD_PDIR_VECLSB_BITSHFT 0 -#define MD_PDIR_VECLSB_MASK (MD_PDIR_VECLSB_BITMASK << 10) - -/* - * Directory initialization values - */ - -#define MD_PDIR_INIT_LO (MD_DIR_UNOWNED << MD_PDIR_STATE_SHFT | \ - MD_PDIR_AX) -#define MD_PDIR_INIT_HI 0 -#define MD_PDIR_INIT_PROT (MD_PROT_RW << MD_PPROT_IO_SHFT | \ - MD_PROT_RW << MD_PPROT_SHFT) - -/* - * Standard SIMM directory entry shifts and masks. Each is valid only in the - * context(s) indicated, where A and C indicate the directory entry format - * as shown, and low and/or high indicates which double-word of the entry. - * - * Format A: STATE == shared - * Format C: STATE != shared - */ - -#define MD_SDIR_MASK 0xffff /* Whole entry */ -#define MD_SDIR_ECC_SHFT 0 /* AC low or high */ -#define MD_SDIR_ECC_MASK 0x1f -#define MD_SDIR_PRIO_SHFT 6 /* AC low */ -#define MD_SDIR_PRIO_MASK (1 << 6) -#define MD_SDIR_AX_SHFT 5 /* AC low */ -#define MD_SDIR_AX_MASK (1 << 5) -#define MD_SDIR_AX (1 << 5) -#define MD_SDIR_STATE_SHFT 7 /* AC low */ -#define MD_SDIR_STATE_MASK (7 << 7) -#define MD_SDIR_PTR_SHFT 10 /* C low */ -#define MD_SDIR_PTR_MASK (0x3f << 10) -#define MD_SDIR_CWOFF_SHFT 5 /* C high */ -#define MD_SDIR_CWOFF_MASK (7 << 5) -#define MD_SDIR_VECMSB_SHFT 11 /* A low */ -#define MD_SDIR_VECMSB_BITMASK 0x1f -#define MD_SDIR_VECMSB_BITSHFT 7 -#define MD_SDIR_VECMSB_MASK (MD_SDIR_VECMSB_BITMASK << 11) -#define MD_SDIR_VECLSB_SHFT 5 /* A high */ -#define MD_SDIR_VECLSB_BITMASK 0x7ff -#define MD_SDIR_VECLSB_BITSHFT 0 -#define MD_SDIR_VECLSB_MASK (MD_SDIR_VECLSB_BITMASK << 5) - -/* - * Directory initialization values - */ - -#define MD_SDIR_INIT_LO (MD_DIR_UNOWNED << MD_SDIR_STATE_SHFT | \ - MD_SDIR_AX) -#define MD_SDIR_INIT_HI 0 -#define MD_SDIR_INIT_PROT (MD_PROT_RW << MD_SPROT_SHFT) - -/* Protection and migration field values */ - -#define MD_PROT_RW (UINT64_CAST 0x6) -#define MD_PROT_RO (UINT64_CAST 0x3) -#define MD_PROT_NO (UINT64_CAST 0x0) -#define MD_PROT_BAD (UINT64_CAST 0x5) - -/* Premium SIMM protection entry shifts and masks. */ - -#define MD_PPROT_SHFT 0 /* Prot. field */ -#define MD_PPROT_MASK 7 -#define MD_PPROT_MIGMD_SHFT 3 /* Migration mode */ -#define MD_PPROT_MIGMD_MASK (3 << 3) -#define MD_PPROT_REFCNT_SHFT 5 /* Reference count */ -#define MD_PPROT_REFCNT_WIDTH 0x7ffff -#define MD_PPROT_REFCNT_MASK (MD_PPROT_REFCNT_WIDTH << 5) - -#define MD_PPROT_IO_SHFT 45 /* I/O Prot field */ -#define MD_PPROT_IO_MASK (UINT64_CAST 7 << 45) - -/* Standard SIMM protection entry shifts and masks. */ - -#define MD_SPROT_SHFT 0 /* Prot. field */ -#define MD_SPROT_MASK 7 -#define MD_SPROT_MIGMD_SHFT 3 /* Migration mode */ -#define MD_SPROT_MIGMD_MASK (3 << 3) -#define MD_SPROT_REFCNT_SHFT 5 /* Reference count */ -#define MD_SPROT_REFCNT_WIDTH 0x7ff -#define MD_SPROT_REFCNT_MASK (MD_SPROT_REFCNT_WIDTH << 5) - -/* Migration modes used in protection entries */ - -#define MD_PROT_MIGMD_IREL (UINT64_CAST 0x3 << 3) -#define MD_PROT_MIGMD_IABS (UINT64_CAST 0x2 << 3) -#define MD_PROT_MIGMD_PREL (UINT64_CAST 0x1 << 3) -#define MD_PROT_MIGMD_OFF (UINT64_CAST 0x0 << 3) - - -/* - * Operations on page migration threshold register - */ - -#ifndef __ASSEMBLY__ - -/* - * LED register macros - */ - -#define CPU_LED_ADDR(_nasid, _slice) \ - (private.p_sn00 ? \ - REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 + ((_slice) << 5)) : \ - REMOTE_HUB_ADDR((_nasid), MD_LED0 + ((_slice) << 3))) - -#define SET_CPU_LEDS(_nasid, _slice, _val) \ - (HUB_S(CPU_LED_ADDR(_nasid, _slice), (_val))) - -#define SET_MY_LEDS(_v) \ - SET_CPU_LEDS(get_nasid(), get_slice(), (_v)) - -/* - * Operations on Memory/Directory DIMM control register - */ - -#define DIRTYPE_PREMIUM 1 -#define DIRTYPE_STANDARD 0 -#define MD_MEMORY_CONFIG_DIR_TYPE_GET(region) (\ - (REMOTE_HUB_L(region, MD_MEMORY_CONFIG) & MMC_DIR_PREMIUM_MASK) >> \ - MMC_DIR_PREMIUM_SHFT) - - -/* - * Operations on page migration count difference and absolute threshold - * registers - */ - -#define MD_MIG_DIFF_THRESH_GET(region) ( \ - REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \ - MD_MIG_DIFF_THRES_VALUE_MASK) - -#define MD_MIG_DIFF_THRESH_SET(region, value) ( \ - REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \ - MD_MIG_DIFF_THRES_VALID_MASK | (value))) - -#define MD_MIG_DIFF_THRESH_DISABLE(region) ( \ - REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \ - REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) \ - & ~MD_MIG_DIFF_THRES_VALID_MASK)) - -#define MD_MIG_DIFF_THRESH_ENABLE(region) ( \ - REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \ - REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) \ - | MD_MIG_DIFF_THRES_VALID_MASK)) - -#define MD_MIG_DIFF_THRESH_IS_ENABLED(region) ( \ - REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \ - MD_MIG_DIFF_THRES_VALID_MASK) - -#define MD_MIG_VALUE_THRESH_GET(region) ( \ - REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) & \ - MD_MIG_VALUE_THRES_VALUE_MASK) - -#define MD_MIG_VALUE_THRESH_SET(region, value) ( \ - REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \ - MD_MIG_VALUE_THRES_VALID_MASK | (value))) - -#define MD_MIG_VALUE_THRESH_DISABLE(region) ( \ - REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \ - REMOTE_HUB_L(region, MD_MIG_VALUE_THRESH) \ - & ~MD_MIG_VALUE_THRES_VALID_MASK)) - -#define MD_MIG_VALUE_THRESH_ENABLE(region) ( \ - REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \ - REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) \ - | MD_MIG_VALUE_THRES_VALID_MASK)) - -#define MD_MIG_VALUE_THRESH_IS_ENABLED(region) ( \ - REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) & \ - MD_MIG_VALUE_THRES_VALID_MASK) - -/* - * Operations on page migration candidate register - */ - -#define MD_MIG_CANDIDATE_GET(my_region_id) ( \ - REMOTE_HUB_L((my_region_id), MD_MIG_CANDIDATE_CLR)) - -#define MD_MIG_CANDIDATE_HWPFN(value) ((value) & MD_MIG_CANDIDATE_ADDR_MASK) - -#define MD_MIG_CANDIDATE_NODEID(value) ( \ - ((value) & MD_MIG_CANDIDATE_NODEID_MASK) >> MD_MIG_CANDIDATE_NODEID_SHFT) - -#define MD_MIG_CANDIDATE_TYPE(value) ( \ - ((value) & MD_MIG_CANDIDATE_TYPE_MASK) >> MD_MIG_CANDIDATE_TYPE_SHFT) - -#define MD_MIG_CANDIDATE_VALID(value) ( \ - ((value) & MD_MIG_CANDIDATE_VALID_MASK) >> MD_MIG_CANDIDATE_VALID_SHFT) - -/* - * Macros to retrieve fields in the protection entry - */ - -/* for Premium SIMM */ -#define MD_PPROT_REFCNT_GET(value) ( \ - ((value) & MD_PPROT_REFCNT_MASK) >> MD_PPROT_REFCNT_SHFT) - -#define MD_PPROT_MIGMD_GET(value) ( \ - ((value) & MD_PPROT_MIGMD_MASK) >> MD_PPROT_MIGMD_SHFT) - -/* for Standard SIMM */ -#define MD_SPROT_REFCNT_GET(value) ( \ - ((value) & MD_SPROT_REFCNT_MASK) >> MD_SPROT_REFCNT_SHFT) - -#define MD_SPROT_MIGMD_GET(value) ( \ - ((value) & MD_SPROT_MIGMD_MASK) >> MD_SPROT_MIGMD_SHFT) - -/* - * Format of dir_error, mem_error, protocol_error and misc_error registers - */ - -struct dir_error_reg { - u64 uce_vld: 1, /* 63: valid directory uce */ - ae_vld: 1, /* 62: valid dir prot ecc error */ - ce_vld: 1, /* 61: valid correctable ECC err*/ - rsvd1: 19, /* 60-42: reserved */ - bad_prot: 3, /* 41-39: encoding, bad access rights*/ - bad_syn: 7, /* 38-32: bad dir syndrome */ - rsvd2: 2, /* 31-30: reserved */ - hspec_addr:27, /* 29-03: bddir space bad entry */ - uce_ovr: 1, /* 2: multiple dir uce's */ - ae_ovr: 1, /* 1: multiple prot ecc errs*/ - ce_ovr: 1; /* 0: multiple correctable errs */ -}; - -typedef union md_dir_error { - u64 derr_reg; /* the entire register */ - struct dir_error_reg derr_fmt; /* the register format */ -} md_dir_error_t; - - -struct mem_error_reg { - u64 uce_vld: 1, /* 63: valid memory uce */ - ce_vld: 1, /* 62: valid correctable ECC err*/ - rsvd1: 22, /* 61-40: reserved */ - bad_syn: 8, /* 39-32: bad mem ecc syndrome */ - address: 29, /* 31-03: bad entry pointer */ - rsvd2: 1, /* 2: reserved */ - uce_ovr: 1, /* 1: multiple mem uce's */ - ce_ovr: 1; /* 0: multiple correctable errs */ -}; - - -typedef union md_mem_error { - u64 merr_reg; /* the entire register */ - struct mem_error_reg merr_fmt; /* format of the mem_error reg */ -} md_mem_error_t; - - -struct proto_error_reg { - u64 valid: 1, /* 63: valid protocol error */ - rsvd1: 2, /* 62-61: reserved */ - initiator:11, /* 60-50: id of request initiator*/ - backoff: 2, /* 49-48: backoff control */ - msg_type: 8, /* 47-40: type of request */ - access: 2, /* 39-38: access rights of initiator*/ - priority: 1, /* 37: priority level of requestor*/ - dir_state: 4, /* 36-33: state of directory */ - pointer_me:1, /* 32: initiator same as dir ptr */ - address: 29, /* 31-03: request address */ - rsvd2: 2, /* 02-01: reserved */ - overrun: 1; /* 0: multiple protocol errs */ -}; - -typedef union md_proto_error { - u64 perr_reg; /* the entire register */ - struct proto_error_reg perr_fmt; /* format of the register */ -} md_proto_error_t; - - -struct md_sdir_high_fmt { - unsigned short sd_hi_bvec : 11, - sd_hi_ecc : 5; -}; - - -typedef union md_sdir_high { - /* The 16 bits of standard directory, upper word */ - unsigned short sd_hi_val; - struct md_sdir_high_fmt sd_hi_fmt; -}md_sdir_high_t; - - -struct md_sdir_low_shared_fmt { - /* The meaning of lower directory, shared */ - unsigned short sds_lo_bvec : 5, - sds_lo_unused: 1, - sds_lo_state : 3, - sds_lo_prio : 1, - sds_lo_ax : 1, - sds_lo_ecc : 5; -}; - -struct md_sdir_low_exclusive_fmt { - /* The meaning of lower directory, exclusive */ - unsigned short sde_lo_ptr : 6, - sde_lo_state : 3, - sde_lo_prio : 1, - sde_lo_ax : 1, - sde_lo_ecc : 5; -}; - - -typedef union md_sdir_low { - /* The 16 bits of standard directory, lower word */ - unsigned short sd_lo_val; - struct md_sdir_low_exclusive_fmt sde_lo_fmt; - struct md_sdir_low_shared_fmt sds_lo_fmt; -}md_sdir_low_t; - - - -struct md_pdir_high_fmt { - u64 pd_hi_unused : 16, - pd_hi_bvec : 38, - pd_hi_unused1 : 3, - pd_hi_ecc : 7; -}; - - -typedef union md_pdir_high { - /* The 48 bits of standard directory, upper word */ - u64 pd_hi_val; - struct md_pdir_high_fmt pd_hi_fmt; -}md_pdir_high_t; - - -struct md_pdir_low_shared_fmt { - /* The meaning of lower directory, shared */ - u64 pds_lo_unused : 16, - pds_lo_bvec : 26, - pds_lo_cnt : 6, - pds_lo_state : 3, - pds_lo_ste : 1, - pds_lo_prio : 4, - pds_lo_ax : 1, - pds_lo_ecc : 7; -}; - -struct md_pdir_low_exclusive_fmt { - /* The meaning of lower directory, exclusive */ - u64 pde_lo_unused : 31, - pde_lo_ptr : 11, - pde_lo_unused1 : 6, - pde_lo_state : 3, - pde_lo_ste : 1, - pde_lo_prio : 4, - pde_lo_ax : 1, - pde_lo_ecc : 7; -}; - - -typedef union md_pdir_loent { - /* The 48 bits of premium directory, lower word */ - u64 pd_lo_val; - struct md_pdir_low_exclusive_fmt pde_lo_fmt; - struct md_pdir_low_shared_fmt pds_lo_fmt; -}md_pdir_low_t; - - -/* - * the following two "union" definitions and two - * "struct" definitions are used in vmdump.c to - * represent directory memory information. - */ - -typedef union md_dir_high { - md_sdir_high_t md_sdir_high; - md_pdir_high_t md_pdir_high; -} md_dir_high_t; - -typedef union md_dir_low { - md_sdir_low_t md_sdir_low; - md_pdir_low_t md_pdir_low; -} md_dir_low_t; - -typedef struct bddir_entry { - md_dir_low_t md_dir_low; - md_dir_high_t md_dir_high; -} bddir_entry_t; - -typedef struct dir_mem_entry { - u64 prcpf[MAX_REGIONS]; - bddir_entry_t directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE]; -} dir_mem_entry_t; - - - -typedef union md_perf_sel { - u64 perf_sel_reg; - struct { - u64 perf_rsvd : 60, - perf_en : 1, - perf_sel : 3; - } perf_sel_bits; -} md_perf_sel_t; - -typedef union md_perf_cnt { - u64 perf_cnt; - struct { - u64 perf_rsvd : 44, - perf_cnt : 20; - } perf_cnt_bits; -} md_perf_cnt_t; - - -#endif /* !__ASSEMBLY__ */ - - -#define DIR_ERROR_VALID_MASK 0xe000000000000000 -#define DIR_ERROR_VALID_SHFT 61 -#define DIR_ERROR_VALID_UCE 0x8000000000000000 -#define DIR_ERROR_VALID_AE 0x4000000000000000 -#define DIR_ERROR_VALID_CE 0x2000000000000000 - -#define MEM_ERROR_VALID_MASK 0xc000000000000000 -#define MEM_ERROR_VALID_SHFT 62 -#define MEM_ERROR_VALID_UCE 0x8000000000000000 -#define MEM_ERROR_VALID_CE 0x4000000000000000 - -#define PROTO_ERROR_VALID_MASK 0x8000000000000000 - -#define MISC_ERROR_VALID_MASK 0x3ff - -/* - * Mask for hspec address that is stored in the dir error register. - * This represents bits 29 through 3. - */ -#define DIR_ERR_HSPEC_MASK 0x3ffffff8 -#define ERROR_HSPEC_MASK 0x3ffffff8 -#define ERROR_HSPEC_SHFT 3 -#define ERROR_ADDR_MASK 0xfffffff8 -#define ERROR_ADDR_SHFT 3 - -/* - * MD_MISC_ERROR register defines. - */ - -#define MMCE_VALID_MASK 0x3ff -#define MMCE_ILL_MSG_SHFT 8 -#define MMCE_ILL_MSG_MASK (UINT64_CAST 0x03 << MMCE_ILL_MSG_SHFT) -#define MMCE_ILL_REV_SHFT 6 -#define MMCE_ILL_REV_MASK (UINT64_CAST 0x03 << MMCE_ILL_REV_SHFT) -#define MMCE_LONG_PACK_SHFT 4 -#define MMCE_LONG_PACK_MASK (UINT64_CAST 0x03 << MMCE_lONG_PACK_SHFT) -#define MMCE_SHORT_PACK_SHFT 2 -#define MMCE_SHORT_PACK_MASK (UINT64_CAST 0x03 << MMCE_SHORT_PACK_SHFT) -#define MMCE_BAD_DATA_SHFT 0 -#define MMCE_BAD_DATA_MASK (UINT64_CAST 0x03 << MMCE_BAD_DATA_SHFT) - - -#define MD_PERF_COUNTERS 6 -#define MD_PERF_SETS 6 - -#define MEM_DIMM_MASK 0xe0000000 -#define MEM_DIMM_SHFT 29 - -#endif /* _ASM_SN_SN0_HUBMD_H */ diff --git a/include/asm-mips/sn/sn0/hubni.h b/include/asm-mips/sn/sn0/hubni.h deleted file mode 100644 index b40d3ef97a12..000000000000 --- a/include/asm-mips/sn/sn0/hubni.h +++ /dev/null @@ -1,255 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from IRIX , Revision 1.27. - * - * Copyright (C) 1992-1997, 1999 Silicon Graphics, Inc. - * Copyright (C) 1999 by Ralf Baechle - */ -#ifndef _ASM_SGI_SN0_HUBNI_H -#define _ASM_SGI_SN0_HUBNI_H - -#ifndef __ASSEMBLY__ -#include -#endif - -/* - * Hub Network Interface registers - * - * All registers in this file are subject to change until Hub chip tapeout. - */ - -#define NI_BASE 0x600000 -#define NI_BASE_TABLES 0x630000 - -#define NI_STATUS_REV_ID 0x600000 /* Hub network status, rev, and ID */ -#define NI_PORT_RESET 0x600008 /* Reset the network interface */ -#define NI_PROTECTION 0x600010 /* NI register access permissions */ -#define NI_GLOBAL_PARMS 0x600018 /* LLP parameters */ -#define NI_SCRATCH_REG0 0x600100 /* Scratch register 0 (64 bits) */ -#define NI_SCRATCH_REG1 0x600108 /* Scratch register 1 (64 bits) */ -#define NI_DIAG_PARMS 0x600110 /* Parameters for diags */ - -#define NI_VECTOR_PARMS 0x600200 /* Vector PIO routing parameters */ -#define NI_VECTOR 0x600208 /* Vector PIO route */ -#define NI_VECTOR_DATA 0x600210 /* Vector PIO data */ -#define NI_VECTOR_STATUS 0x600300 /* Vector PIO return status */ -#define NI_RETURN_VECTOR 0x600308 /* Vector PIO return vector */ -#define NI_VECTOR_READ_DATA 0x600310 /* Vector PIO read data */ -#define NI_VECTOR_CLEAR 0x600380 /* Vector PIO read & clear status */ - -#define NI_IO_PROTECT 0x600400 /* PIO protection bits */ -#define NI_IO_PROT_OVRRD 0x600408 /* PIO protection bit override */ - -#define NI_AGE_CPU0_MEMORY 0x600500 /* CPU 0 memory age control */ -#define NI_AGE_CPU0_PIO 0x600508 /* CPU 0 PIO age control */ -#define NI_AGE_CPU1_MEMORY 0x600510 /* CPU 1 memory age control */ -#define NI_AGE_CPU1_PIO 0x600518 /* CPU 1 PIO age control */ -#define NI_AGE_GBR_MEMORY 0x600520 /* GBR memory age control */ -#define NI_AGE_GBR_PIO 0x600528 /* GBR PIO age control */ -#define NI_AGE_IO_MEMORY 0x600530 /* IO memory age control */ -#define NI_AGE_IO_PIO 0x600538 /* IO PIO age control */ -#define NI_AGE_REG_MIN NI_AGE_CPU0_MEMORY -#define NI_AGE_REG_MAX NI_AGE_IO_PIO - -#define NI_PORT_PARMS 0x608000 /* LLP Parameters */ -#define NI_PORT_ERROR 0x608008 /* LLP Errors */ -#define NI_PORT_ERROR_CLEAR 0x608088 /* Clear the error bits */ - -#define NI_META_TABLE0 0x638000 /* First meta routing table entry */ -#define NI_META_TABLE(_x) (NI_META_TABLE0 + (8 * (_x))) -#define NI_META_ENTRIES 32 - -#define NI_LOCAL_TABLE0 0x638100 /* First local routing table entry */ -#define NI_LOCAL_TABLE(_x) (NI_LOCAL_TABLE0 + (8 * (_x))) -#define NI_LOCAL_ENTRIES 16 - -/* - * NI_STATUS_REV_ID mask and shift definitions - * Have to use UINT64_CAST instead of 'L' suffix, for assembler. - */ - -#define NSRI_8BITMODE_SHFT 30 -#define NSRI_8BITMODE_MASK (UINT64_CAST 0x1 << 30) -#define NSRI_LINKUP_SHFT 29 -#define NSRI_LINKUP_MASK (UINT64_CAST 0x1 << 29) -#define NSRI_DOWNREASON_SHFT 28 /* 0=failed, 1=never came */ -#define NSRI_DOWNREASON_MASK (UINT64_CAST 0x1 << 28) /* out of reset. */ -#define NSRI_MORENODES_SHFT 18 -#define NSRI_MORENODES_MASK (UINT64_CAST 1 << 18) /* Max. # of nodes */ -#define MORE_MEMORY 0 -#define MORE_NODES 1 -#define NSRI_REGIONSIZE_SHFT 17 -#define NSRI_REGIONSIZE_MASK (UINT64_CAST 1 << 17) /* Granularity */ -#define REGIONSIZE_FINE 1 -#define REGIONSIZE_COARSE 0 -#define NSRI_NODEID_SHFT 8 -#define NSRI_NODEID_MASK (UINT64_CAST 0x1ff << 8)/* Node (Hub) ID */ -#define NSRI_REV_SHFT 4 -#define NSRI_REV_MASK (UINT64_CAST 0xf << 4) /* Chip Revision */ -#define NSRI_CHIPID_SHFT 0 -#define NSRI_CHIPID_MASK (UINT64_CAST 0xf) /* Chip type ID */ - -/* - * In fine mode, each node is a region. In coarse mode, there are - * eight nodes per region. - */ -#define NASID_TO_FINEREG_SHFT 0 -#define NASID_TO_COARSEREG_SHFT 3 - -/* NI_PORT_RESET mask definitions */ - -#define NPR_PORTRESET (UINT64_CAST 1 << 7) /* Send warm reset */ -#define NPR_LINKRESET (UINT64_CAST 1 << 1) /* Send link reset */ -#define NPR_LOCALRESET (UINT64_CAST 1) /* Reset entire hub */ - -/* NI_PROTECTION mask and shift definitions */ - -#define NPROT_RESETOK (UINT64_CAST 1) - -/* NI_GLOBAL_PARMS mask and shift definitions */ - -#define NGP_MAXRETRY_SHFT 48 /* Maximum retries */ -#define NGP_MAXRETRY_MASK (UINT64_CAST 0x3ff << 48) -#define NGP_TAILTOWRAP_SHFT 32 /* Tail timeout wrap */ -#define NGP_TAILTOWRAP_MASK (UINT64_CAST 0xffff << 32) - -#define NGP_CREDITTOVAL_SHFT 16 /* Tail timeout wrap */ -#define NGP_CREDITTOVAL_MASK (UINT64_CAST 0xf << 16) -#define NGP_TAILTOVAL_SHFT 4 /* Tail timeout value */ -#define NGP_TAILTOVAL_MASK (UINT64_CAST 0xf << 4) - -/* NI_DIAG_PARMS mask and shift definitions */ - -#define NDP_PORTTORESET (UINT64_CAST 1 << 18) /* Port tmout reset */ -#define NDP_LLP8BITMODE (UINT64_CAST 1 << 12) /* LLP 8-bit mode */ -#define NDP_PORTDISABLE (UINT64_CAST 1 << 6) /* Port disable */ -#define NDP_SENDERROR (UINT64_CAST 1) /* Send data error */ - -/* - * NI_VECTOR_PARMS mask and shift definitions. - * TYPE may be any of the first four PIOTYPEs defined under NI_VECTOR_STATUS. - */ - -#define NVP_PIOID_SHFT 40 -#define NVP_PIOID_MASK (UINT64_CAST 0x3ff << 40) -#define NVP_WRITEID_SHFT 32 -#define NVP_WRITEID_MASK (UINT64_CAST 0xff << 32) -#define NVP_ADDRESS_MASK (UINT64_CAST 0xffff8) /* Bits 19:3 */ -#define NVP_TYPE_SHFT 0 -#define NVP_TYPE_MASK (UINT64_CAST 0x3) - -/* NI_VECTOR_STATUS mask and shift definitions */ - -#define NVS_VALID (UINT64_CAST 1 << 63) -#define NVS_OVERRUN (UINT64_CAST 1 << 62) -#define NVS_TARGET_SHFT 51 -#define NVS_TARGET_MASK (UINT64_CAST 0x3ff << 51) -#define NVS_PIOID_SHFT 40 -#define NVS_PIOID_MASK (UINT64_CAST 0x3ff << 40) -#define NVS_WRITEID_SHFT 32 -#define NVS_WRITEID_MASK (UINT64_CAST 0xff << 32) -#define NVS_ADDRESS_MASK (UINT64_CAST 0xfffffff8) /* Bits 31:3 */ -#define NVS_TYPE_SHFT 0 -#define NVS_TYPE_MASK (UINT64_CAST 0x7) -#define NVS_ERROR_MASK (UINT64_CAST 0x4) /* bit set means error */ - - -#define PIOTYPE_READ 0 /* VECTOR_PARMS and VECTOR_STATUS */ -#define PIOTYPE_WRITE 1 /* VECTOR_PARMS and VECTOR_STATUS */ -#define PIOTYPE_UNDEFINED 2 /* VECTOR_PARMS and VECTOR_STATUS */ -#define PIOTYPE_EXCHANGE 3 /* VECTOR_PARMS and VECTOR_STATUS */ -#define PIOTYPE_ADDR_ERR 4 /* VECTOR_STATUS only */ -#define PIOTYPE_CMD_ERR 5 /* VECTOR_STATUS only */ -#define PIOTYPE_PROT_ERR 6 /* VECTOR_STATUS only */ -#define PIOTYPE_UNKNOWN 7 /* VECTOR_STATUS only */ - -/* NI_AGE_XXX mask and shift definitions */ - -#define NAGE_VCH_SHFT 10 -#define NAGE_VCH_MASK (UINT64_CAST 3 << 10) -#define NAGE_CC_SHFT 8 -#define NAGE_CC_MASK (UINT64_CAST 3 << 8) -#define NAGE_AGE_SHFT 0 -#define NAGE_AGE_MASK (UINT64_CAST 0xff) -#define NAGE_MASK (NAGE_VCH_MASK | NAGE_CC_MASK | NAGE_AGE_MASK) - -#define VCHANNEL_A 0 -#define VCHANNEL_B 1 -#define VCHANNEL_ANY 2 - -/* NI_PORT_PARMS mask and shift definitions */ - -#define NPP_NULLTO_SHFT 10 -#define NPP_NULLTO_MASK (UINT64_CAST 0x3f << 16) -#define NPP_MAXBURST_SHFT 0 -#define NPP_MAXBURST_MASK (UINT64_CAST 0x3ff) -#define NPP_RESET_DFLT_HUB20 ((UINT64_CAST 1 << NPP_NULLTO_SHFT) | \ - (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT)) -#define NPP_RESET_DEFAULTS ((UINT64_CAST 6 << NPP_NULLTO_SHFT) | \ - (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT)) - - -/* NI_PORT_ERROR mask and shift definitions */ - -#define NPE_LINKRESET (UINT64_CAST 1 << 37) -#define NPE_INTERNALERROR (UINT64_CAST 1 << 36) -#define NPE_BADMESSAGE (UINT64_CAST 1 << 35) -#define NPE_BADDEST (UINT64_CAST 1 << 34) -#define NPE_FIFOOVERFLOW (UINT64_CAST 1 << 33) -#define NPE_CREDITTO_SHFT 28 -#define NPE_CREDITTO_MASK (UINT64_CAST 0xf << 28) -#define NPE_TAILTO_SHFT 24 -#define NPE_TAILTO_MASK (UINT64_CAST 0xf << 24) -#define NPE_RETRYCOUNT_SHFT 16 -#define NPE_RETRYCOUNT_MASK (UINT64_CAST 0xff << 16) -#define NPE_CBERRCOUNT_SHFT 8 -#define NPE_CBERRCOUNT_MASK (UINT64_CAST 0xff << 8) -#define NPE_SNERRCOUNT_SHFT 0 -#define NPE_SNERRCOUNT_MASK (UINT64_CAST 0xff << 0) -#define NPE_MASK 0x3effffffff - -#define NPE_COUNT_MAX 0xff - -#define NPE_FATAL_ERRORS (NPE_LINKRESET | NPE_INTERNALERROR | \ - NPE_BADMESSAGE | NPE_BADDEST | \ - NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK | \ - NPE_TAILTO_MASK) - -/* NI_META_TABLE mask and shift definitions */ - -#define NMT_EXIT_PORT_MASK (UINT64_CAST 0xf) - -/* NI_LOCAL_TABLE mask and shift definitions */ - -#define NLT_EXIT_PORT_MASK (UINT64_CAST 0xf) - -#ifndef __ASSEMBLY__ - -typedef union hubni_port_error_u { - u64 nipe_reg_value; - struct { - u64 nipe_rsvd: 26, /* unused */ - nipe_lnk_reset: 1, /* link reset */ - nipe_intl_err: 1, /* internal error */ - nipe_bad_msg: 1, /* bad message */ - nipe_bad_dest: 1, /* bad dest */ - nipe_fifo_ovfl: 1, /* fifo overflow */ - nipe_rsvd1: 1, /* unused */ - nipe_credit_to: 4, /* credit timeout */ - nipe_tail_to: 4, /* tail timeout */ - nipe_retry_cnt: 8, /* retry error count */ - nipe_cb_cnt: 8, /* checkbit error count */ - nipe_sn_cnt: 8; /* sequence number count */ - } nipe_fields_s; -} hubni_port_error_t; - -#define NI_LLP_RETRY_MAX 0xff -#define NI_LLP_CB_MAX 0xff -#define NI_LLP_SN_MAX 0xff - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_SGI_SN0_HUBNI_H */ diff --git a/include/asm-mips/sn/sn0/hubpi.h b/include/asm-mips/sn/sn0/hubpi.h deleted file mode 100644 index e39f5f9da040..000000000000 --- a/include/asm-mips/sn/sn0/hubpi.h +++ /dev/null @@ -1,409 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from IRIX , revision 1.28. - * - * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. - * Copyright (C) 1999 by Ralf Baechle - */ -#ifndef _ASM_SN_SN0_HUBPI_H -#define _ASM_SN_SN0_HUBPI_H - -#include - -/* - * Hub I/O interface registers - * - * All registers in this file are subject to change until Hub chip tapeout. - * All register "addresses" are actually offsets. Use the LOCAL_HUB - * or REMOTE_HUB macros to synthesize an actual address - */ - -#define PI_BASE 0x000000 - -/* General protection and control registers */ - -#define PI_CPU_PROTECT 0x000000 /* CPU Protection */ -#define PI_PROT_OVERRD 0x000008 /* Clear CPU Protection bit */ -#define PI_IO_PROTECT 0x000010 /* Interrupt Pending Protection */ -#define PI_REGION_PRESENT 0x000018 /* Indicates whether region exists */ -#define PI_CPU_NUM 0x000020 /* CPU Number ID */ -#define PI_CALIAS_SIZE 0x000028 /* Cached Alias Size */ -#define PI_MAX_CRB_TIMEOUT 0x000030 /* Maximum Timeout for CRB */ -#define PI_CRB_SFACTOR 0x000038 /* Scale factor for CRB timeout */ - -/* CALIAS values */ -#define PI_CALIAS_SIZE_0 0 -#define PI_CALIAS_SIZE_4K 1 -#define PI_CALIAS_SIZE_8K 2 -#define PI_CALIAS_SIZE_16K 3 -#define PI_CALIAS_SIZE_32K 4 -#define PI_CALIAS_SIZE_64K 5 -#define PI_CALIAS_SIZE_128K 6 -#define PI_CALIAS_SIZE_256K 7 -#define PI_CALIAS_SIZE_512K 8 -#define PI_CALIAS_SIZE_1M 9 -#define PI_CALIAS_SIZE_2M 10 -#define PI_CALIAS_SIZE_4M 11 -#define PI_CALIAS_SIZE_8M 12 -#define PI_CALIAS_SIZE_16M 13 -#define PI_CALIAS_SIZE_32M 14 -#define PI_CALIAS_SIZE_64M 15 - -/* Processor control and status checking */ - -#define PI_CPU_PRESENT_A 0x000040 /* CPU Present A */ -#define PI_CPU_PRESENT_B 0x000048 /* CPU Present B */ -#define PI_CPU_ENABLE_A 0x000050 /* CPU Enable A */ -#define PI_CPU_ENABLE_B 0x000058 /* CPU Enable B */ -#define PI_REPLY_LEVEL 0x000060 /* Reply Level */ -#define PI_HARDRESET_BIT 0x020068 /* Bit cleared by s/w on SR */ -#define PI_NMI_A 0x000070 /* NMI to CPU A */ -#define PI_NMI_B 0x000078 /* NMI to CPU B */ -#define PI_NMI_OFFSET (PI_NMI_B - PI_NMI_A) -#define PI_SOFTRESET 0x000080 /* Softreset (to both CPUs) */ - -/* Regular Interrupt register checking. */ - -#define PI_INT_PEND_MOD 0x000090 /* Write to set pending ints */ -#define PI_INT_PEND0 0x000098 /* Read to get pending ints */ -#define PI_INT_PEND1 0x0000a0 /* Read to get pending ints */ -#define PI_INT_MASK0_A 0x0000a8 /* Interrupt Mask 0 for CPU A */ -#define PI_INT_MASK1_A 0x0000b0 /* Interrupt Mask 1 for CPU A */ -#define PI_INT_MASK0_B 0x0000b8 /* Interrupt Mask 0 for CPU B */ -#define PI_INT_MASK1_B 0x0000c0 /* Interrupt Mask 1 for CPU B */ - -#define PI_INT_MASK_OFFSET 0x10 /* Offset from A to B */ - -/* Crosscall interrupts */ - -#define PI_CC_PEND_SET_A 0x0000c8 /* CC Interrupt Pending Set, CPU A */ -#define PI_CC_PEND_SET_B 0x0000d0 /* CC Interrupt Pending Set, CPU B */ -#define PI_CC_PEND_CLR_A 0x0000d8 /* CC Interrupt Pending Clr, CPU A */ -#define PI_CC_PEND_CLR_B 0x0000e0 /* CC Interrupt Pending Clr, CPU B */ -#define PI_CC_MASK 0x0000e8 /* CC Interrupt mask */ - -#define PI_INT_SET_OFFSET 0x08 /* Offset from A to B */ - -/* Realtime Counter and Profiler control registers */ - -#define PI_RT_COUNT 0x030100 /* Real Time Counter */ -#define PI_RT_COMPARE_A 0x000108 /* Real Time Compare A */ -#define PI_RT_COMPARE_B 0x000110 /* Real Time Compare B */ -#define PI_PROFILE_COMPARE 0x000118 /* L5 int to both cpus when == RTC */ -#define PI_RT_PEND_A 0x000120 /* Set if RT int for A pending */ -#define PI_RT_PEND_B 0x000128 /* Set if RT int for B pending */ -#define PI_PROF_PEND_A 0x000130 /* Set if Prof int for A pending */ -#define PI_PROF_PEND_B 0x000138 /* Set if Prof int for B pending */ -#define PI_RT_EN_A 0x000140 /* RT int for CPU A enable */ -#define PI_RT_EN_B 0x000148 /* RT int for CPU B enable */ -#define PI_PROF_EN_A 0x000150 /* PROF int for CPU A enable */ -#define PI_PROF_EN_B 0x000158 /* PROF int for CPU B enable */ -#define PI_RT_LOCAL_CTRL 0x000160 /* RT control register */ -#define PI_RT_FILTER_CTRL 0x000168 /* GCLK Filter control register */ - -#define PI_COUNT_OFFSET 0x08 /* A to B offset for all counts */ - -/* Built-In Self Test support */ - -#define PI_BIST_WRITE_DATA 0x000200 /* BIST write data */ -#define PI_BIST_READ_DATA 0x000208 /* BIST read data */ -#define PI_BIST_COUNT_TARG 0x000210 /* BIST Count and Target */ -#define PI_BIST_READY 0x000218 /* BIST Ready indicator */ -#define PI_BIST_SHIFT_LOAD 0x000220 /* BIST control */ -#define PI_BIST_SHIFT_UNLOAD 0x000228 /* BIST control */ -#define PI_BIST_ENTER_RUN 0x000230 /* BIST control */ - -/* Graphics control registers */ - -#define PI_GFX_PAGE_A 0x000300 /* Graphics page A */ -#define PI_GFX_CREDIT_CNTR_A 0x000308 /* Graphics credit counter A */ -#define PI_GFX_BIAS_A 0x000310 /* Graphics bias A */ -#define PI_GFX_INT_CNTR_A 0x000318 /* Graphics interrupt counter A */ -#define PI_GFX_INT_CMP_A 0x000320 /* Graphics interrupt comparator A */ -#define PI_GFX_PAGE_B 0x000328 /* Graphics page B */ -#define PI_GFX_CREDIT_CNTR_B 0x000330 /* Graphics credit counter B */ -#define PI_GFX_BIAS_B 0x000338 /* Graphics bias B */ -#define PI_GFX_INT_CNTR_B 0x000340 /* Graphics interrupt counter B */ -#define PI_GFX_INT_CMP_B 0x000348 /* Graphics interrupt comparator B */ - -#define PI_GFX_OFFSET (PI_GFX_PAGE_B - PI_GFX_PAGE_A) -#define PI_GFX_PAGE_ENABLE 0x0000010000000000LL - -/* Error and timeout registers */ -#define PI_ERR_INT_PEND 0x000400 /* Error Interrupt Pending */ -#define PI_ERR_INT_MASK_A 0x000408 /* Error Interrupt mask for CPU A */ -#define PI_ERR_INT_MASK_B 0x000410 /* Error Interrupt mask for CPU B */ -#define PI_ERR_STACK_ADDR_A 0x000418 /* Error stack address for CPU A */ -#define PI_ERR_STACK_ADDR_B 0x000420 /* Error stack address for CPU B */ -#define PI_ERR_STACK_SIZE 0x000428 /* Error Stack Size */ -#define PI_ERR_STATUS0_A 0x000430 /* Error Status 0A */ -#define PI_ERR_STATUS0_A_RCLR 0x000438 /* Error Status 0A clear on read */ -#define PI_ERR_STATUS1_A 0x000440 /* Error Status 1A */ -#define PI_ERR_STATUS1_A_RCLR 0x000448 /* Error Status 1A clear on read */ -#define PI_ERR_STATUS0_B 0x000450 /* Error Status 0B */ -#define PI_ERR_STATUS0_B_RCLR 0x000458 /* Error Status 0B clear on read */ -#define PI_ERR_STATUS1_B 0x000460 /* Error Status 1B */ -#define PI_ERR_STATUS1_B_RCLR 0x000468 /* Error Status 1B clear on read */ -#define PI_SPOOL_CMP_A 0x000470 /* Spool compare for CPU A */ -#define PI_SPOOL_CMP_B 0x000478 /* Spool compare for CPU B */ -#define PI_CRB_TIMEOUT_A 0x000480 /* Timed out CRB entries for A */ -#define PI_CRB_TIMEOUT_B 0x000488 /* Timed out CRB entries for B */ -#define PI_SYSAD_ERRCHK_EN 0x000490 /* Enables SYSAD error checking */ -#define PI_BAD_CHECK_BIT_A 0x000498 /* Force SYSAD check bit error */ -#define PI_BAD_CHECK_BIT_B 0x0004a0 /* Force SYSAD check bit error */ -#define PI_NACK_CNT_A 0x0004a8 /* Consecutive NACK counter */ -#define PI_NACK_CNT_B 0x0004b0 /* " " for CPU B */ -#define PI_NACK_CMP 0x0004b8 /* NACK count compare */ -#define PI_STACKADDR_OFFSET (PI_ERR_STACK_ADDR_B - PI_ERR_STACK_ADDR_A) -#define PI_ERRSTAT_OFFSET (PI_ERR_STATUS0_B - PI_ERR_STATUS0_A) -#define PI_RDCLR_OFFSET (PI_ERR_STATUS0_A_RCLR - PI_ERR_STATUS0_A) - -/* Bits in PI_ERR_INT_PEND */ -#define PI_ERR_SPOOL_CMP_B 0x00000001 /* Spool end hit high water */ -#define PI_ERR_SPOOL_CMP_A 0x00000002 -#define PI_ERR_SPUR_MSG_B 0x00000004 /* Spurious message intr. */ -#define PI_ERR_SPUR_MSG_A 0x00000008 -#define PI_ERR_WRB_TERR_B 0x00000010 /* WRB TERR */ -#define PI_ERR_WRB_TERR_A 0x00000020 -#define PI_ERR_WRB_WERR_B 0x00000040 /* WRB WERR */ -#define PI_ERR_WRB_WERR_A 0x00000080 -#define PI_ERR_SYSSTATE_B 0x00000100 /* SysState parity error */ -#define PI_ERR_SYSSTATE_A 0x00000200 -#define PI_ERR_SYSAD_DATA_B 0x00000400 /* SysAD data parity error */ -#define PI_ERR_SYSAD_DATA_A 0x00000800 -#define PI_ERR_SYSAD_ADDR_B 0x00001000 /* SysAD addr parity error */ -#define PI_ERR_SYSAD_ADDR_A 0x00002000 -#define PI_ERR_SYSCMD_DATA_B 0x00004000 /* SysCmd data parity error */ -#define PI_ERR_SYSCMD_DATA_A 0x00008000 -#define PI_ERR_SYSCMD_ADDR_B 0x00010000 /* SysCmd addr parity error */ -#define PI_ERR_SYSCMD_ADDR_A 0x00020000 -#define PI_ERR_BAD_SPOOL_B 0x00040000 /* Error spooling to memory */ -#define PI_ERR_BAD_SPOOL_A 0x00080000 -#define PI_ERR_UNCAC_UNCORR_B 0x00100000 /* Uncached uncorrectable */ -#define PI_ERR_UNCAC_UNCORR_A 0x00200000 -#define PI_ERR_SYSSTATE_TAG_B 0x00400000 /* SysState tag parity error */ -#define PI_ERR_SYSSTATE_TAG_A 0x00800000 -#define PI_ERR_MD_UNCORR 0x01000000 /* Must be cleared in MD */ - -#define PI_ERR_CLEAR_ALL_A 0x00aaaaaa -#define PI_ERR_CLEAR_ALL_B 0x00555555 - - -/* - * The following three macros define all possible error int pends. - */ - -#define PI_FATAL_ERR_CPU_A (PI_ERR_SYSSTATE_TAG_A | \ - PI_ERR_BAD_SPOOL_A | \ - PI_ERR_SYSCMD_ADDR_A | \ - PI_ERR_SYSCMD_DATA_A | \ - PI_ERR_SYSAD_ADDR_A | \ - PI_ERR_SYSAD_DATA_A | \ - PI_ERR_SYSSTATE_A) - -#define PI_MISC_ERR_CPU_A (PI_ERR_UNCAC_UNCORR_A | \ - PI_ERR_WRB_WERR_A | \ - PI_ERR_WRB_TERR_A | \ - PI_ERR_SPUR_MSG_A | \ - PI_ERR_SPOOL_CMP_A) - -#define PI_FATAL_ERR_CPU_B (PI_ERR_SYSSTATE_TAG_B | \ - PI_ERR_BAD_SPOOL_B | \ - PI_ERR_SYSCMD_ADDR_B | \ - PI_ERR_SYSCMD_DATA_B | \ - PI_ERR_SYSAD_ADDR_B | \ - PI_ERR_SYSAD_DATA_B | \ - PI_ERR_SYSSTATE_B) - -#define PI_MISC_ERR_CPU_B (PI_ERR_UNCAC_UNCORR_B | \ - PI_ERR_WRB_WERR_B | \ - PI_ERR_WRB_TERR_B | \ - PI_ERR_SPUR_MSG_B | \ - PI_ERR_SPOOL_CMP_B) - -#define PI_ERR_GENERIC (PI_ERR_MD_UNCORR) - -/* - * Error types for PI_ERR_STATUS0_[AB] and error stack: - * Use the write types if WRBRRB is 1 else use the read types - */ - -/* Fields in PI_ERR_STATUS0_[AB] */ -#define PI_ERR_ST0_TYPE_MASK 0x0000000000000007 -#define PI_ERR_ST0_TYPE_SHFT 0 -#define PI_ERR_ST0_REQNUM_MASK 0x0000000000000038 -#define PI_ERR_ST0_REQNUM_SHFT 3 -#define PI_ERR_ST0_SUPPL_MASK 0x000000000001ffc0 -#define PI_ERR_ST0_SUPPL_SHFT 6 -#define PI_ERR_ST0_CMD_MASK 0x0000000001fe0000 -#define PI_ERR_ST0_CMD_SHFT 17 -#define PI_ERR_ST0_ADDR_MASK 0x3ffffffffe000000 -#define PI_ERR_ST0_ADDR_SHFT 25 -#define PI_ERR_ST0_OVERRUN_MASK 0x4000000000000000 -#define PI_ERR_ST0_OVERRUN_SHFT 62 -#define PI_ERR_ST0_VALID_MASK 0x8000000000000000 -#define PI_ERR_ST0_VALID_SHFT 63 - -/* Fields in PI_ERR_STATUS1_[AB] */ -#define PI_ERR_ST1_SPOOL_MASK 0x00000000001fffff -#define PI_ERR_ST1_SPOOL_SHFT 0 -#define PI_ERR_ST1_TOUTCNT_MASK 0x000000001fe00000 -#define PI_ERR_ST1_TOUTCNT_SHFT 21 -#define PI_ERR_ST1_INVCNT_MASK 0x0000007fe0000000 -#define PI_ERR_ST1_INVCNT_SHFT 29 -#define PI_ERR_ST1_CRBNUM_MASK 0x0000038000000000 -#define PI_ERR_ST1_CRBNUM_SHFT 39 -#define PI_ERR_ST1_WRBRRB_MASK 0x0000040000000000 -#define PI_ERR_ST1_WRBRRB_SHFT 42 -#define PI_ERR_ST1_CRBSTAT_MASK 0x001ff80000000000 -#define PI_ERR_ST1_CRBSTAT_SHFT 43 -#define PI_ERR_ST1_MSGSRC_MASK 0xffe0000000000000 -#define PI_ERR_ST1_MSGSRC_SHFT 53 - -/* Fields in the error stack */ -#define PI_ERR_STK_TYPE_MASK 0x0000000000000003 -#define PI_ERR_STK_TYPE_SHFT 0 -#define PI_ERR_STK_SUPPL_MASK 0x0000000000000038 -#define PI_ERR_STK_SUPPL_SHFT 3 -#define PI_ERR_STK_REQNUM_MASK 0x00000000000001c0 -#define PI_ERR_STK_REQNUM_SHFT 6 -#define PI_ERR_STK_CRBNUM_MASK 0x0000000000000e00 -#define PI_ERR_STK_CRBNUM_SHFT 9 -#define PI_ERR_STK_WRBRRB_MASK 0x0000000000001000 -#define PI_ERR_STK_WRBRRB_SHFT 12 -#define PI_ERR_STK_CRBSTAT_MASK 0x00000000007fe000 -#define PI_ERR_STK_CRBSTAT_SHFT 13 -#define PI_ERR_STK_CMD_MASK 0x000000007f800000 -#define PI_ERR_STK_CMD_SHFT 23 -#define PI_ERR_STK_ADDR_MASK 0xffffffff80000000 -#define PI_ERR_STK_ADDR_SHFT 31 - -/* Error type in the error status or stack on Read CRBs */ -#define PI_ERR_RD_PRERR 1 -#define PI_ERR_RD_DERR 2 -#define PI_ERR_RD_TERR 3 - -/* Error type in the error status or stack on Write CRBs */ -#define PI_ERR_WR_WERR 0 -#define PI_ERR_WR_PWERR 1 -#define PI_ERR_WR_TERR 3 - -/* Read or Write CRB in error status or stack */ -#define PI_ERR_RRB 0 -#define PI_ERR_WRB 1 -#define PI_ERR_ANY_CRB 2 - -/* Address masks in the error status and error stack are not the same */ -#define ERR_STK_ADDR_SHFT 7 -#define ERR_STAT0_ADDR_SHFT 3 - -#define PI_MIN_STACK_SIZE 4096 /* For figuring out the size to set */ -#define PI_STACK_SIZE_SHFT 12 /* 4k */ - -#define ERR_STACK_SIZE_BYTES(_sz) \ - ((_sz) ? (PI_MIN_STACK_SIZE << ((_sz) - 1)) : 0) - -#ifndef __ASSEMBLY__ -/* - * format of error stack and error status registers. - */ - -struct err_stack_format { - u64 sk_addr : 33, /* address */ - sk_cmd : 8, /* message command */ - sk_crb_sts : 10, /* status from RRB or WRB */ - sk_rw_rb : 1, /* RRB == 0, WRB == 1 */ - sk_crb_num : 3, /* WRB (0 to 7) or RRB (0 to 4) */ - sk_t5_req : 3, /* RRB T5 request number */ - sk_suppl : 3, /* lowest 3 bit of supplemental */ - sk_err_type: 3; /* error type */ -}; - -typedef union pi_err_stack { - u64 pi_stk_word; - struct err_stack_format pi_stk_fmt; -} pi_err_stack_t; - -struct err_status0_format { - u64 s0_valid : 1, /* Valid */ - s0_ovr_run : 1, /* Overrun, spooled to memory */ - s0_addr : 37, /* address */ - s0_cmd : 8, /* message command */ - s0_supl : 11, /* message supplemental field */ - s0_t5_req : 3, /* RRB T5 request number */ - s0_err_type: 3; /* error type */ -}; - -typedef union pi_err_stat0 { - u64 pi_stat0_word; - struct err_status0_format pi_stat0_fmt; -} pi_err_stat0_t; - -struct err_status1_format { - u64 s1_src : 11, /* message source */ - s1_crb_sts : 10, /* status from RRB or WRB */ - s1_rw_rb : 1, /* RRB == 0, WRB == 1 */ - s1_crb_num : 3, /* WRB (0 to 7) or RRB (0 to 4) */ - s1_inval_cnt:10, /* signed invalidate counter RRB */ - s1_to_cnt : 8, /* crb timeout counter */ - s1_spl_cnt : 21; /* number spooled to memory */ -}; - -typedef union pi_err_stat1 { - u64 pi_stat1_word; - struct err_status1_format pi_stat1_fmt; -} pi_err_stat1_t; - -typedef u64 rtc_time_t; - -#endif /* !__ASSEMBLY__ */ - - -/* Bits in PI_SYSAD_ERRCHK_EN */ -#define PI_SYSAD_ERRCHK_ECCGEN 0x01 /* Enable ECC generation */ -#define PI_SYSAD_ERRCHK_QUALGEN 0x02 /* Enable data quality signal gen. */ -#define PI_SYSAD_ERRCHK_SADP 0x04 /* Enable SysAD parity checking */ -#define PI_SYSAD_ERRCHK_CMDP 0x08 /* Enable SysCmd parity checking */ -#define PI_SYSAD_ERRCHK_STATE 0x10 /* Enable SysState parity checking */ -#define PI_SYSAD_ERRCHK_QUAL 0x20 /* Enable data quality checking */ -#define PI_SYSAD_CHECK_ALL 0x3f /* Generate and check all signals. */ - -/* Interrupt pending bits on R10000 */ - -#define HUB_IP_PEND0 0x0400 -#define HUB_IP_PEND1_CC 0x0800 -#define HUB_IP_RT 0x1000 -#define HUB_IP_PROF 0x2000 -#define HUB_IP_ERROR 0x4000 -#define HUB_IP_MASK 0x7c00 - -/* PI_RT_LOCAL_CTRL mask and shift definitions */ - -#define PRLC_USE_INT_SHFT 16 -#define PRLC_USE_INT_MASK (UINT64_CAST 1 << 16) -#define PRLC_USE_INT (UINT64_CAST 1 << 16) -#define PRLC_GCLK_SHFT 15 -#define PRLC_GCLK_MASK (UINT64_CAST 1 << 15) -#define PRLC_GCLK (UINT64_CAST 1 << 15) -#define PRLC_GCLK_COUNT_SHFT 8 -#define PRLC_GCLK_COUNT_MASK (UINT64_CAST 0x7f << 8) -#define PRLC_MAX_COUNT_SHFT 1 -#define PRLC_MAX_COUNT_MASK (UINT64_CAST 0x7f << 1) -#define PRLC_GCLK_EN_SHFT 0 -#define PRLC_GCLK_EN_MASK (UINT64_CAST 1) -#define PRLC_GCLK_EN (UINT64_CAST 1) - -/* PI_RT_FILTER_CTRL mask and shift definitions */ - -/* - * Bits for NACK_CNT_A/B and NACK_CMP - */ -#define PI_NACK_CNT_EN_SHFT 20 -#define PI_NACK_CNT_EN_MASK 0x100000 -#define PI_NACK_CNT_MASK 0x0fffff -#define PI_NACK_CNT_MAX 0x0fffff - -#endif /* _ASM_SN_SN0_HUBPI_H */ diff --git a/include/asm-mips/sn/sn0/ip27.h b/include/asm-mips/sn/sn0/ip27.h deleted file mode 100644 index 3c97e0855c8d..000000000000 --- a/include/asm-mips/sn/sn0/ip27.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from IRIX . - * - * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. - * Copyright (C) 1999, 2006 by Ralf Baechle - */ -#ifndef _ASM_SN_SN0_IP27_H -#define _ASM_SN_SN0_IP27_H - -#include - -/* - * Simple definitions for the masks which remove SW bits from pte. - */ - -#define TLBLO_HWBITSHIFT 0 /* Shift value, for masking */ - -#ifndef __ASSEMBLY__ - -#define CAUSE_BERRINTR IE_IRQ5 - -#define ECCF_CACHE_ERR 0 -#define ECCF_TAGLO 1 -#define ECCF_ECC 2 -#define ECCF_ERROREPC 3 -#define ECCF_PADDR 4 -#define ECCF_SIZE (5 * sizeof(long)) - -#endif /* !__ASSEMBLY__ */ - -#ifdef __ASSEMBLY__ - -/* - * KL_GET_CPUNUM (similar to EV_GET_SPNUM for EVEREST platform) reads - * the processor number of the calling processor. The proc parameters - * must be a register. - */ -#define KL_GET_CPUNUM(proc) \ - dli proc, LOCAL_HUB(0); \ - ld proc, PI_CPU_NUM(proc) - -#endif /* __ASSEMBLY__ */ - -/* - * R10000 status register interrupt bit mask usage for IP27. - */ -#define SRB_SWTIMO IE_SW0 /* 0x0100 */ -#define SRB_NET IE_SW1 /* 0x0200 */ -#define SRB_DEV0 IE_IRQ0 /* 0x0400 */ -#define SRB_DEV1 IE_IRQ1 /* 0x0800 */ -#define SRB_TIMOCLK IE_IRQ2 /* 0x1000 */ -#define SRB_PROFCLK IE_IRQ3 /* 0x2000 */ -#define SRB_ERR IE_IRQ4 /* 0x4000 */ -#define SRB_SCHEDCLK IE_IRQ5 /* 0x8000 */ - -#define SR_IBIT_HI SRB_DEV0 -#define SR_IBIT_PROF SRB_PROFCLK - -#define SRB_SWTIMO_IDX 0 -#define SRB_NET_IDX 1 -#define SRB_DEV0_IDX 2 -#define SRB_DEV1_IDX 3 -#define SRB_TIMOCLK_IDX 4 -#define SRB_PROFCLK_IDX 5 -#define SRB_ERR_IDX 6 -#define SRB_SCHEDCLK_IDX 7 - -#define NUM_CAUSE_INTRS 8 - -#define SCACHE_LINESIZE 128 -#define SCACHE_LINEMASK (SCACHE_LINESIZE - 1) - -#include - -#define LED_CYCLE_MASK 0x0f -#define LED_CYCLE_SHFT 4 - -#define SEND_NMI(_nasid, _slice) \ - REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1) - -#endif /* _ASM_SN_SN0_IP27_H */ diff --git a/include/asm-mips/sn/sn_private.h b/include/asm-mips/sn/sn_private.h deleted file mode 100644 index 1a2c3025bf28..000000000000 --- a/include/asm-mips/sn/sn_private.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef __ASM_SN_SN_PRIVATE_H -#define __ASM_SN_SN_PRIVATE_H - -#include - -extern nasid_t master_nasid; - -extern void cpu_node_probe(void); -extern cnodeid_t get_compact_nodeid(void); -extern void hub_rtc_init(cnodeid_t); -extern void cpu_time_init(void); -extern void per_cpu_init(void); -extern void install_cpu_nmi_handler(int slice); -extern void install_ipi(void); -extern void setup_replication_mask(void); -extern void replicate_kernel_text(void); -extern pfn_t node_getfirstfree(cnodeid_t); - -#endif /* __ASM_SN_SN_PRIVATE_H */ diff --git a/include/asm-mips/sn/types.h b/include/asm-mips/sn/types.h deleted file mode 100644 index 74d0bb260b86..000000000000 --- a/include/asm-mips/sn/types.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 Silicon Graphics, Inc. - * Copyright (C) 1999 by Ralf Baechle - */ -#ifndef _ASM_SN_TYPES_H -#define _ASM_SN_TYPES_H - -#include - -typedef unsigned long cpuid_t; -typedef unsigned long cnodemask_t; -typedef signed short nasid_t; /* node id in numa-as-id space */ -typedef signed short cnodeid_t; /* node id in compact-id space */ -typedef signed char partid_t; /* partition ID type */ -typedef signed short moduleid_t; /* user-visible module number type */ -typedef signed short cmoduleid_t; /* kernel compact module id type */ -typedef unsigned char clusterid_t; /* Clusterid of the cell */ -typedef unsigned long pfn_t; - -typedef dev_t vertex_hdl_t; /* hardware graph vertex handle */ - -#endif /* _ASM_SN_TYPES_H */ diff --git a/include/asm-mips/sni.h b/include/asm-mips/sni.h deleted file mode 100644 index 8c1eb02c6d16..000000000000 --- a/include/asm-mips/sni.h +++ /dev/null @@ -1,244 +0,0 @@ -/* - * SNI specific definitions - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1997, 1998 by Ralf Baechle - * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) - */ -#ifndef __ASM_SNI_H -#define __ASM_SNI_H - -extern unsigned int sni_brd_type; - -#define SNI_BRD_10 2 -#define SNI_BRD_10NEW 3 -#define SNI_BRD_TOWER_OASIC 4 -#define SNI_BRD_MINITOWER 5 -#define SNI_BRD_PCI_TOWER 6 -#define SNI_BRD_RM200 7 -#define SNI_BRD_PCI_MTOWER 8 -#define SNI_BRD_PCI_DESKTOP 9 -#define SNI_BRD_PCI_TOWER_CPLUS 10 -#define SNI_BRD_PCI_MTOWER_CPLUS 11 - -/* RM400 cpu types */ -#define SNI_CPU_M8021 0x01 -#define SNI_CPU_M8030 0x04 -#define SNI_CPU_M8031 0x06 -#define SNI_CPU_M8034 0x0f -#define SNI_CPU_M8037 0x07 -#define SNI_CPU_M8040 0x05 -#define SNI_CPU_M8043 0x09 -#define SNI_CPU_M8050 0x0b -#define SNI_CPU_M8053 0x0d - -#define SNI_PORT_BASE CKSEG1ADDR(0xb4000000) - -#ifndef __MIPSEL__ -/* - * ASIC PCI registers for big endian configuration. - */ -#define PCIMT_UCONF CKSEG1ADDR(0xbfff0004) -#define PCIMT_IOADTIMEOUT2 CKSEG1ADDR(0xbfff000c) -#define PCIMT_IOMEMCONF CKSEG1ADDR(0xbfff0014) -#define PCIMT_IOMMU CKSEG1ADDR(0xbfff001c) -#define PCIMT_IOADTIMEOUT1 CKSEG1ADDR(0xbfff0024) -#define PCIMT_DMAACCESS CKSEG1ADDR(0xbfff002c) -#define PCIMT_DMAHIT CKSEG1ADDR(0xbfff0034) -#define PCIMT_ERRSTATUS CKSEG1ADDR(0xbfff003c) -#define PCIMT_ERRADDR CKSEG1ADDR(0xbfff0044) -#define PCIMT_SYNDROME CKSEG1ADDR(0xbfff004c) -#define PCIMT_ITPEND CKSEG1ADDR(0xbfff0054) -#define IT_INT2 0x01 -#define IT_INTD 0x02 -#define IT_INTC 0x04 -#define IT_INTB 0x08 -#define IT_INTA 0x10 -#define IT_EISA 0x20 -#define IT_SCSI 0x40 -#define IT_ETH 0x80 -#define PCIMT_IRQSEL CKSEG1ADDR(0xbfff005c) -#define PCIMT_TESTMEM CKSEG1ADDR(0xbfff0064) -#define PCIMT_ECCREG CKSEG1ADDR(0xbfff006c) -#define PCIMT_CONFIG_ADDRESS CKSEG1ADDR(0xbfff0074) -#define PCIMT_ASIC_ID CKSEG1ADDR(0xbfff007c) /* read */ -#define PCIMT_SOFT_RESET CKSEG1ADDR(0xbfff007c) /* write */ -#define PCIMT_PIA_OE CKSEG1ADDR(0xbfff0084) -#define PCIMT_PIA_DATAOUT CKSEG1ADDR(0xbfff008c) -#define PCIMT_PIA_DATAIN CKSEG1ADDR(0xbfff0094) -#define PCIMT_CACHECONF CKSEG1ADDR(0xbfff009c) -#define PCIMT_INVSPACE CKSEG1ADDR(0xbfff00a4) -#else -/* - * ASIC PCI registers for little endian configuration. - */ -#define PCIMT_UCONF CKSEG1ADDR(0xbfff0000) -#define PCIMT_IOADTIMEOUT2 CKSEG1ADDR(0xbfff0008) -#define PCIMT_IOMEMCONF CKSEG1ADDR(0xbfff0010) -#define PCIMT_IOMMU CKSEG1ADDR(0xbfff0018) -#define PCIMT_IOADTIMEOUT1 CKSEG1ADDR(0xbfff0020) -#define PCIMT_DMAACCESS CKSEG1ADDR(0xbfff0028) -#define PCIMT_DMAHIT CKSEG1ADDR(0xbfff0030) -#define PCIMT_ERRSTATUS CKSEG1ADDR(0xbfff0038) -#define PCIMT_ERRADDR CKSEG1ADDR(0xbfff0040) -#define PCIMT_SYNDROME CKSEG1ADDR(0xbfff0048) -#define PCIMT_ITPEND CKSEG1ADDR(0xbfff0050) -#define IT_INT2 0x01 -#define IT_INTD 0x02 -#define IT_INTC 0x04 -#define IT_INTB 0x08 -#define IT_INTA 0x10 -#define IT_EISA 0x20 -#define IT_SCSI 0x40 -#define IT_ETH 0x80 -#define PCIMT_IRQSEL CKSEG1ADDR(0xbfff0058) -#define PCIMT_TESTMEM CKSEG1ADDR(0xbfff0060) -#define PCIMT_ECCREG CKSEG1ADDR(0xbfff0068) -#define PCIMT_CONFIG_ADDRESS CKSEG1ADDR(0xbfff0070) -#define PCIMT_ASIC_ID CKSEG1ADDR(0xbfff0078) /* read */ -#define PCIMT_SOFT_RESET CKSEG1ADDR(0xbfff0078) /* write */ -#define PCIMT_PIA_OE CKSEG1ADDR(0xbfff0080) -#define PCIMT_PIA_DATAOUT CKSEG1ADDR(0xbfff0088) -#define PCIMT_PIA_DATAIN CKSEG1ADDR(0xbfff0090) -#define PCIMT_CACHECONF CKSEG1ADDR(0xbfff0098) -#define PCIMT_INVSPACE CKSEG1ADDR(0xbfff00a0) -#endif - -#define PCIMT_PCI_CONF CKSEG1ADDR(0xbfff0100) - -/* - * Data port for the PCI bus in IO space - */ -#define PCIMT_CONFIG_DATA 0x0cfc - -/* - * Board specific registers - */ -#define PCIMT_CSMSR CKSEG1ADDR(0xbfd00000) -#define PCIMT_CSSWITCH CKSEG1ADDR(0xbfd10000) -#define PCIMT_CSITPEND CKSEG1ADDR(0xbfd20000) -#define PCIMT_AUTO_PO_EN CKSEG1ADDR(0xbfd30000) -#define PCIMT_CLR_TEMP CKSEG1ADDR(0xbfd40000) -#define PCIMT_AUTO_PO_DIS CKSEG1ADDR(0xbfd50000) -#define PCIMT_EXMSR CKSEG1ADDR(0xbfd60000) -#define PCIMT_UNUSED1 CKSEG1ADDR(0xbfd70000) -#define PCIMT_CSWCSM CKSEG1ADDR(0xbfd80000) -#define PCIMT_UNUSED2 CKSEG1ADDR(0xbfd90000) -#define PCIMT_CSLED CKSEG1ADDR(0xbfda0000) -#define PCIMT_CSMAPISA CKSEG1ADDR(0xbfdb0000) -#define PCIMT_CSRSTBP CKSEG1ADDR(0xbfdc0000) -#define PCIMT_CLRPOFF CKSEG1ADDR(0xbfdd0000) -#define PCIMT_CSTIMER CKSEG1ADDR(0xbfde0000) -#define PCIMT_PWDN CKSEG1ADDR(0xbfdf0000) - -/* - * A20R based boards - */ -#define A20R_PT_CLOCK_BASE CKSEG1ADDR(0xbc040000) -#define A20R_PT_TIM0_ACK CKSEG1ADDR(0xbc050000) -#define A20R_PT_TIM1_ACK CKSEG1ADDR(0xbc060000) - -#define SNI_A20R_IRQ_BASE MIPS_CPU_IRQ_BASE -#define SNI_A20R_IRQ_TIMER (SNI_A20R_IRQ_BASE+5) - -#define SNI_PCIT_INT_REG CKSEG1ADDR(0xbfff000c) - -#define SNI_PCIT_INT_START 24 -#define SNI_PCIT_INT_END 30 - -#define PCIT_IRQ_ETHERNET (MIPS_CPU_IRQ_BASE + 5) -#define PCIT_IRQ_INTA (SNI_PCIT_INT_START + 0) -#define PCIT_IRQ_INTB (SNI_PCIT_INT_START + 1) -#define PCIT_IRQ_INTC (SNI_PCIT_INT_START + 2) -#define PCIT_IRQ_INTD (SNI_PCIT_INT_START + 3) -#define PCIT_IRQ_SCSI0 (SNI_PCIT_INT_START + 4) -#define PCIT_IRQ_SCSI1 (SNI_PCIT_INT_START + 5) - - -/* - * Interrupt 0-16 are EISA interrupts. Interrupts from 16 on are assigned - * to the other interrupts generated by ASIC PCI. - * - * INT2 is a wired-or of the push button interrupt, high temperature interrupt - * ASIC PCI interrupt. - */ -#define PCIMT_KEYBOARD_IRQ 1 -#define PCIMT_IRQ_INT2 24 -#define PCIMT_IRQ_INTD 25 -#define PCIMT_IRQ_INTC 26 -#define PCIMT_IRQ_INTB 27 -#define PCIMT_IRQ_INTA 28 -#define PCIMT_IRQ_EISA 29 -#define PCIMT_IRQ_SCSI 30 - -#define PCIMT_IRQ_ETHERNET (MIPS_CPU_IRQ_BASE+6) - -#if 0 -#define PCIMT_IRQ_TEMPERATURE 24 -#define PCIMT_IRQ_EISA_NMI 25 -#define PCIMT_IRQ_POWER_OFF 26 -#define PCIMT_IRQ_BUTTON 27 -#endif - -/* - * Base address for the mapped 16mb EISA bus segment. - */ -#define PCIMT_EISA_BASE CKSEG1ADDR(0xb0000000) - -/* PCI EISA Interrupt acknowledge */ -#define PCIMT_INT_ACKNOWLEDGE CKSEG1ADDR(0xba000000) - -/* - * SNI ID PROM - * - * SNI_IDPROM_MEMSIZE Memsize in 16MB quantities - * SNI_IDPROM_BRDTYPE Board Type - * SNI_IDPROM_CPUTYPE CPU Type on RM400 - */ -#ifdef CONFIG_CPU_BIG_ENDIAN -#define __SNI_END 0 -#endif -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define __SNI_END 3 -#endif -#define SNI_IDPROM_BASE CKSEG1ADDR(0x1ff00000) -#define SNI_IDPROM_MEMSIZE (SNI_IDPROM_BASE + (0x28 ^ __SNI_END)) -#define SNI_IDPROM_BRDTYPE (SNI_IDPROM_BASE + (0x29 ^ __SNI_END)) -#define SNI_IDPROM_CPUTYPE (SNI_IDPROM_BASE + (0x30 ^ __SNI_END)) - -#define SNI_IDPROM_SIZE 0x1000 - -/* board specific init functions */ -extern void sni_a20r_init(void); -extern void sni_pcit_init(void); -extern void sni_rm200_init(void); -extern void sni_pcimt_init(void); - -/* board specific irq init functions */ -extern void sni_a20r_irq_init(void); -extern void sni_pcit_irq_init(void); -extern void sni_pcit_cplus_irq_init(void); -extern void sni_rm200_irq_init(void); -extern void sni_pcimt_irq_init(void); - -/* timer inits */ -extern void sni_cpu_time_init(void); - -/* eisa init for RM200/400 */ -#ifdef CONFIG_EISA -extern int sni_eisa_root_init(void); -#else -static inline int sni_eisa_root_init(void) -{ - return 0; -} -#endif - -/* common irq stuff */ -extern void (*sni_hwint)(void); -extern struct irqaction sni_isa_irq; - -#endif /* __ASM_SNI_H */ diff --git a/include/asm-mips/socket.h b/include/asm-mips/socket.h deleted file mode 100644 index facc2d7a87ca..000000000000 --- a/include/asm-mips/socket.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1997, 1999, 2000, 2001 Ralf Baechle - * Copyright (C) 2000, 2001 Silicon Graphics, Inc. - */ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include - -/* - * For setsockopt(2) - * - * This defines are ABI conformant as far as Linux supports these ... - */ -#define SOL_SOCKET 0xffff - -#define SO_DEBUG 0x0001 /* Record debugging information. */ -#define SO_REUSEADDR 0x0004 /* Allow reuse of local addresses. */ -#define SO_KEEPALIVE 0x0008 /* Keep connections alive and send - SIGPIPE when they die. */ -#define SO_DONTROUTE 0x0010 /* Don't do local routing. */ -#define SO_BROADCAST 0x0020 /* Allow transmission of - broadcast messages. */ -#define SO_LINGER 0x0080 /* Block on close of a reliable - socket to transmit pending data. */ -#define SO_OOBINLINE 0x0100 /* Receive out-of-band data in-band. */ -#if 0 -To add: #define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */ -#endif - -#define SO_TYPE 0x1008 /* Compatible name for SO_STYLE. */ -#define SO_STYLE SO_TYPE /* Synonym */ -#define SO_ERROR 0x1007 /* get error status and clear */ -#define SO_SNDBUF 0x1001 /* Send buffer size. */ -#define SO_RCVBUF 0x1002 /* Receive buffer. */ -#define SO_SNDLOWAT 0x1003 /* send low-water mark */ -#define SO_RCVLOWAT 0x1004 /* receive low-water mark */ -#define SO_SNDTIMEO 0x1005 /* send timeout */ -#define SO_RCVTIMEO 0x1006 /* receive timeout */ -#define SO_ACCEPTCONN 0x1009 - -/* linux-specific, might as well be the same as on i386 */ -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_BSDCOMPAT 14 - -#define SO_PASSCRED 17 -#define SO_PEERCRED 18 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_PEERSEC 30 -#define SO_SNDBUFFORCE 31 -#define SO_RCVBUFFORCE 33 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#ifdef __KERNEL__ - -/** sock_type - Socket types - * - * Please notice that for binary compat reasons MIPS has to - * override the enum sock_type in include/linux/net.h, so - * we define ARCH_HAS_SOCKET_TYPES here. - * - * @SOCK_DGRAM - datagram (conn.less) socket - * @SOCK_STREAM - stream (connection) socket - * @SOCK_RAW - raw socket - * @SOCK_RDM - reliably-delivered message - * @SOCK_SEQPACKET - sequential packet socket - * @SOCK_PACKET - linux specific way of getting packets at the dev level. - * For writing rarp and other similar things on the user level. - */ -enum sock_type { - SOCK_DGRAM = 1, - SOCK_STREAM = 2, - SOCK_RAW = 3, - SOCK_RDM = 4, - SOCK_SEQPACKET = 5, - SOCK_DCCP = 6, - SOCK_PACKET = 10, -}; - -#define SOCK_MAX (SOCK_PACKET + 1) -/* Mask which covers at least up to SOCK_MASK-1. The - * * remaining bits are used as flags. */ -#define SOCK_TYPE_MASK 0xf - -/* Flags for socket, socketpair, paccept */ -#define SOCK_CLOEXEC O_CLOEXEC -#define SOCK_NONBLOCK O_NONBLOCK - -#define ARCH_HAS_SOCKET_TYPES 1 - -#endif /* __KERNEL__ */ - -#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-mips/sockios.h b/include/asm-mips/sockios.h deleted file mode 100644 index ed1a5f78d22f..000000000000 --- a/include/asm-mips/sockios.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Socket-level I/O control calls. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 by Ralf Baechle - */ -#ifndef _ASM_SOCKIOS_H -#define _ASM_SOCKIOS_H - -#include - -/* Socket-level I/O control calls. */ -#define FIOGETOWN _IOR('f', 123, int) -#define FIOSETOWN _IOW('f', 124, int) - -#define SIOCATMARK _IOR('s', 7, int) -#define SIOCSPGRP _IOW('s', 8, pid_t) -#define SIOCGPGRP _IOR('s', 9, pid_t) - -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_SOCKIOS_H */ diff --git a/include/asm-mips/sparsemem.h b/include/asm-mips/sparsemem.h deleted file mode 100644 index 795ac6c23203..000000000000 --- a/include/asm-mips/sparsemem.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _MIPS_SPARSEMEM_H -#define _MIPS_SPARSEMEM_H -#ifdef CONFIG_SPARSEMEM - -/* - * SECTION_SIZE_BITS 2^N: how big each section will be - * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space - */ -#define SECTION_SIZE_BITS 28 -#define MAX_PHYSMEM_BITS 35 - -#endif /* CONFIG_SPARSEMEM */ -#endif /* _MIPS_SPARSEMEM_H */ - diff --git a/include/asm-mips/spinlock.h b/include/asm-mips/spinlock.h deleted file mode 100644 index bb897016c491..000000000000 --- a/include/asm-mips/spinlock.h +++ /dev/null @@ -1,376 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999, 2000, 06 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_SPINLOCK_H -#define _ASM_SPINLOCK_H - -#include -#include - -/* - * Your basic SMP spinlocks, allowing only a single CPU anywhere - */ - -#define __raw_spin_is_locked(x) ((x)->lock != 0) -#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) -#define __raw_spin_unlock_wait(x) \ - do { cpu_relax(); } while ((x)->lock) - -/* - * Simple spin lock operations. There are two variants, one clears IRQ's - * on the local processor, one does not. - * - * We make no fairness assumptions. They have a cost. - */ - -static inline void __raw_spin_lock(raw_spinlock_t *lock) -{ - unsigned int tmp; - - if (R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set noreorder # __raw_spin_lock \n" - "1: ll %1, %2 \n" - " bnez %1, 1b \n" - " li %1, 1 \n" - " sc %1, %0 \n" - " beqzl %1, 1b \n" - " nop \n" - " .set reorder \n" - : "=m" (lock->lock), "=&r" (tmp) - : "m" (lock->lock) - : "memory"); - } else { - __asm__ __volatile__( - " .set noreorder # __raw_spin_lock \n" - "1: ll %1, %2 \n" - " bnez %1, 2f \n" - " li %1, 1 \n" - " sc %1, %0 \n" - " beqz %1, 2f \n" - " nop \n" - " .subsection 2 \n" - "2: ll %1, %2 \n" - " bnez %1, 2b \n" - " li %1, 1 \n" - " b 1b \n" - " nop \n" - " .previous \n" - " .set reorder \n" - : "=m" (lock->lock), "=&r" (tmp) - : "m" (lock->lock) - : "memory"); - } - - smp_llsc_mb(); -} - -static inline void __raw_spin_unlock(raw_spinlock_t *lock) -{ - smp_mb(); - - __asm__ __volatile__( - " .set noreorder # __raw_spin_unlock \n" - " sw $0, %0 \n" - " .set\treorder \n" - : "=m" (lock->lock) - : "m" (lock->lock) - : "memory"); -} - -static inline unsigned int __raw_spin_trylock(raw_spinlock_t *lock) -{ - unsigned int temp, res; - - if (R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set noreorder # __raw_spin_trylock \n" - "1: ll %0, %3 \n" - " ori %2, %0, 1 \n" - " sc %2, %1 \n" - " beqzl %2, 1b \n" - " nop \n" - " andi %2, %0, 1 \n" - " .set reorder" - : "=&r" (temp), "=m" (lock->lock), "=&r" (res) - : "m" (lock->lock) - : "memory"); - } else { - __asm__ __volatile__( - " .set noreorder # __raw_spin_trylock \n" - "1: ll %0, %3 \n" - " ori %2, %0, 1 \n" - " sc %2, %1 \n" - " beqz %2, 2f \n" - " andi %2, %0, 1 \n" - " .subsection 2 \n" - "2: b 1b \n" - " nop \n" - " .previous \n" - " .set reorder" - : "=&r" (temp), "=m" (lock->lock), "=&r" (res) - : "m" (lock->lock) - : "memory"); - } - - smp_llsc_mb(); - - return res == 0; -} - -/* - * Read-write spinlocks, allowing multiple readers but only one writer. - * - * NOTE! it is quite common to have readers in interrupts but no interrupt - * writers. For those circumstances we can "mix" irq-safe locks - any writer - * needs to get a irq-safe write-lock, but readers can get non-irqsafe - * read-locks. - */ - -/* - * read_can_lock - would read_trylock() succeed? - * @lock: the rwlock in question. - */ -#define __raw_read_can_lock(rw) ((rw)->lock >= 0) - -/* - * write_can_lock - would write_trylock() succeed? - * @lock: the rwlock in question. - */ -#define __raw_write_can_lock(rw) (!(rw)->lock) - -static inline void __raw_read_lock(raw_rwlock_t *rw) -{ - unsigned int tmp; - - if (R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set noreorder # __raw_read_lock \n" - "1: ll %1, %2 \n" - " bltz %1, 1b \n" - " addu %1, 1 \n" - " sc %1, %0 \n" - " beqzl %1, 1b \n" - " nop \n" - " .set reorder \n" - : "=m" (rw->lock), "=&r" (tmp) - : "m" (rw->lock) - : "memory"); - } else { - __asm__ __volatile__( - " .set noreorder # __raw_read_lock \n" - "1: ll %1, %2 \n" - " bltz %1, 2f \n" - " addu %1, 1 \n" - " sc %1, %0 \n" - " beqz %1, 1b \n" - " nop \n" - " .subsection 2 \n" - "2: ll %1, %2 \n" - " bltz %1, 2b \n" - " addu %1, 1 \n" - " b 1b \n" - " nop \n" - " .previous \n" - " .set reorder \n" - : "=m" (rw->lock), "=&r" (tmp) - : "m" (rw->lock) - : "memory"); - } - - smp_llsc_mb(); -} - -/* Note the use of sub, not subu which will make the kernel die with an - overflow exception if we ever try to unlock an rwlock that is already - unlocked or is being held by a writer. */ -static inline void __raw_read_unlock(raw_rwlock_t *rw) -{ - unsigned int tmp; - - smp_llsc_mb(); - - if (R10000_LLSC_WAR) { - __asm__ __volatile__( - "1: ll %1, %2 # __raw_read_unlock \n" - " sub %1, 1 \n" - " sc %1, %0 \n" - " beqzl %1, 1b \n" - : "=m" (rw->lock), "=&r" (tmp) - : "m" (rw->lock) - : "memory"); - } else { - __asm__ __volatile__( - " .set noreorder # __raw_read_unlock \n" - "1: ll %1, %2 \n" - " sub %1, 1 \n" - " sc %1, %0 \n" - " beqz %1, 2f \n" - " nop \n" - " .subsection 2 \n" - "2: b 1b \n" - " nop \n" - " .previous \n" - " .set reorder \n" - : "=m" (rw->lock), "=&r" (tmp) - : "m" (rw->lock) - : "memory"); - } -} - -static inline void __raw_write_lock(raw_rwlock_t *rw) -{ - unsigned int tmp; - - if (R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set noreorder # __raw_write_lock \n" - "1: ll %1, %2 \n" - " bnez %1, 1b \n" - " lui %1, 0x8000 \n" - " sc %1, %0 \n" - " beqzl %1, 1b \n" - " nop \n" - " .set reorder \n" - : "=m" (rw->lock), "=&r" (tmp) - : "m" (rw->lock) - : "memory"); - } else { - __asm__ __volatile__( - " .set noreorder # __raw_write_lock \n" - "1: ll %1, %2 \n" - " bnez %1, 2f \n" - " lui %1, 0x8000 \n" - " sc %1, %0 \n" - " beqz %1, 2f \n" - " nop \n" - " .subsection 2 \n" - "2: ll %1, %2 \n" - " bnez %1, 2b \n" - " lui %1, 0x8000 \n" - " b 1b \n" - " nop \n" - " .previous \n" - " .set reorder \n" - : "=m" (rw->lock), "=&r" (tmp) - : "m" (rw->lock) - : "memory"); - } - - smp_llsc_mb(); -} - -static inline void __raw_write_unlock(raw_rwlock_t *rw) -{ - smp_mb(); - - __asm__ __volatile__( - " # __raw_write_unlock \n" - " sw $0, %0 \n" - : "=m" (rw->lock) - : "m" (rw->lock) - : "memory"); -} - -static inline int __raw_read_trylock(raw_rwlock_t *rw) -{ - unsigned int tmp; - int ret; - - if (R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set noreorder # __raw_read_trylock \n" - " li %2, 0 \n" - "1: ll %1, %3 \n" - " bltz %1, 2f \n" - " addu %1, 1 \n" - " sc %1, %0 \n" - " .set reorder \n" - " beqzl %1, 1b \n" - " nop \n" - __WEAK_LLSC_MB - " li %2, 1 \n" - "2: \n" - : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) - : "m" (rw->lock) - : "memory"); - } else { - __asm__ __volatile__( - " .set noreorder # __raw_read_trylock \n" - " li %2, 0 \n" - "1: ll %1, %3 \n" - " bltz %1, 2f \n" - " addu %1, 1 \n" - " sc %1, %0 \n" - " beqz %1, 1b \n" - " nop \n" - " .set reorder \n" - __WEAK_LLSC_MB - " li %2, 1 \n" - "2: \n" - : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) - : "m" (rw->lock) - : "memory"); - } - - return ret; -} - -static inline int __raw_write_trylock(raw_rwlock_t *rw) -{ - unsigned int tmp; - int ret; - - if (R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set noreorder # __raw_write_trylock \n" - " li %2, 0 \n" - "1: ll %1, %3 \n" - " bnez %1, 2f \n" - " lui %1, 0x8000 \n" - " sc %1, %0 \n" - " beqzl %1, 1b \n" - " nop \n" - __WEAK_LLSC_MB - " li %2, 1 \n" - " .set reorder \n" - "2: \n" - : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) - : "m" (rw->lock) - : "memory"); - } else { - __asm__ __volatile__( - " .set noreorder # __raw_write_trylock \n" - " li %2, 0 \n" - "1: ll %1, %3 \n" - " bnez %1, 2f \n" - " lui %1, 0x8000 \n" - " sc %1, %0 \n" - " beqz %1, 3f \n" - " li %2, 1 \n" - "2: \n" - __WEAK_LLSC_MB - " .subsection 2 \n" - "3: b 1b \n" - " li %2, 0 \n" - " .previous \n" - " .set reorder \n" - : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) - : "m" (rw->lock) - : "memory"); - } - - return ret; -} - - -#define _raw_spin_relax(lock) cpu_relax() -#define _raw_read_relax(lock) cpu_relax() -#define _raw_write_relax(lock) cpu_relax() - -#endif /* _ASM_SPINLOCK_H */ diff --git a/include/asm-mips/spinlock_types.h b/include/asm-mips/spinlock_types.h deleted file mode 100644 index ce26c5048b15..000000000000 --- a/include/asm-mips/spinlock_types.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_SPINLOCK_TYPES_H -#define _ASM_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct { - volatile unsigned int lock; -} raw_spinlock_t; - -#define __RAW_SPIN_LOCK_UNLOCKED { 0 } - -typedef struct { - volatile unsigned int lock; -} raw_rwlock_t; - -#define __RAW_RW_LOCK_UNLOCKED { 0 } - -#endif diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h deleted file mode 100644 index 4c37c4e5f72e..000000000000 --- a/include/asm-mips/stackframe.h +++ /dev/null @@ -1,574 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 95, 96, 99, 2001 Ralf Baechle - * Copyright (C) 1994, 1995, 1996 Paul M. Antoine. - * Copyright (C) 1999 Silicon Graphics, Inc. - * Copyright (C) 2007 Maciej W. Rozycki - */ -#ifndef _ASM_STACKFRAME_H -#define _ASM_STACKFRAME_H - -#include - -#include -#include -#include -#include - -/* - * For SMTC kernel, global IE should be left set, and interrupts - * controlled exclusively via IXMT. - */ -#ifdef CONFIG_MIPS_MT_SMTC -#define STATMASK 0x1e -#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) -#define STATMASK 0x3f -#else -#define STATMASK 0x1f -#endif - -#ifdef CONFIG_MIPS_MT_SMTC -#include -#endif /* CONFIG_MIPS_MT_SMTC */ - - .macro SAVE_AT - .set push - .set noat - LONG_S $1, PT_R1(sp) - .set pop - .endm - - .macro SAVE_TEMP -#ifdef CONFIG_CPU_HAS_SMARTMIPS - mflhxu v1 - LONG_S v1, PT_LO(sp) - mflhxu v1 - LONG_S v1, PT_HI(sp) - mflhxu v1 - LONG_S v1, PT_ACX(sp) -#else - mfhi v1 - LONG_S v1, PT_HI(sp) - mflo v1 - LONG_S v1, PT_LO(sp) -#endif -#ifdef CONFIG_32BIT - LONG_S $8, PT_R8(sp) - LONG_S $9, PT_R9(sp) -#endif - LONG_S $10, PT_R10(sp) - LONG_S $11, PT_R11(sp) - LONG_S $12, PT_R12(sp) - LONG_S $13, PT_R13(sp) - LONG_S $14, PT_R14(sp) - LONG_S $15, PT_R15(sp) - LONG_S $24, PT_R24(sp) - .endm - - .macro SAVE_STATIC - LONG_S $16, PT_R16(sp) - LONG_S $17, PT_R17(sp) - LONG_S $18, PT_R18(sp) - LONG_S $19, PT_R19(sp) - LONG_S $20, PT_R20(sp) - LONG_S $21, PT_R21(sp) - LONG_S $22, PT_R22(sp) - LONG_S $23, PT_R23(sp) - LONG_S $30, PT_R30(sp) - .endm - -#ifdef CONFIG_SMP -#ifdef CONFIG_MIPS_MT_SMTC -#define PTEBASE_SHIFT 19 /* TCBIND */ -#else -#define PTEBASE_SHIFT 23 /* CONTEXT */ -#endif - .macro get_saved_sp /* SMP variation */ -#ifdef CONFIG_MIPS_MT_SMTC - mfc0 k0, CP0_TCBIND -#else - MFC0 k0, CP0_CONTEXT -#endif -#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) - lui k1, %hi(kernelsp) -#else - lui k1, %highest(kernelsp) - daddiu k1, %higher(kernelsp) - dsll k1, 16 - daddiu k1, %hi(kernelsp) - dsll k1, 16 -#endif - LONG_SRL k0, PTEBASE_SHIFT - LONG_ADDU k1, k0 - LONG_L k1, %lo(kernelsp)(k1) - .endm - - .macro set_saved_sp stackp temp temp2 -#ifdef CONFIG_MIPS_MT_SMTC - mfc0 \temp, CP0_TCBIND -#else - MFC0 \temp, CP0_CONTEXT -#endif - LONG_SRL \temp, PTEBASE_SHIFT - LONG_S \stackp, kernelsp(\temp) - .endm -#else - .macro get_saved_sp /* Uniprocessor variation */ -#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) - lui k1, %hi(kernelsp) -#else - lui k1, %highest(kernelsp) - daddiu k1, %higher(kernelsp) - dsll k1, k1, 16 - daddiu k1, %hi(kernelsp) - dsll k1, k1, 16 -#endif - LONG_L k1, %lo(kernelsp)(k1) - .endm - - .macro set_saved_sp stackp temp temp2 - LONG_S \stackp, kernelsp - .endm -#endif - - .macro SAVE_SOME - .set push - .set noat - .set reorder - mfc0 k0, CP0_STATUS - sll k0, 3 /* extract cu0 bit */ - .set noreorder - bltz k0, 8f - move k1, sp - .set reorder - /* Called from user mode, new stack. */ - get_saved_sp -#ifndef CONFIG_CPU_DADDI_WORKAROUNDS -8: move k0, sp - PTR_SUBU sp, k1, PT_SIZE -#else - .set at=k0 -8: PTR_SUBU k1, PT_SIZE - .set noat - move k0, sp - move sp, k1 -#endif - LONG_S k0, PT_R29(sp) - LONG_S $3, PT_R3(sp) - /* - * You might think that you don't need to save $0, - * but the FPU emulator and gdb remote debug stub - * need it to operate correctly - */ - LONG_S $0, PT_R0(sp) - mfc0 v1, CP0_STATUS - LONG_S $2, PT_R2(sp) - LONG_S v1, PT_STATUS(sp) -#ifdef CONFIG_MIPS_MT_SMTC - /* - * Ideally, these instructions would be shuffled in - * to cover the pipeline delay. - */ - .set mips32 - mfc0 v1, CP0_TCSTATUS - .set mips0 - LONG_S v1, PT_TCSTATUS(sp) -#endif /* CONFIG_MIPS_MT_SMTC */ - LONG_S $4, PT_R4(sp) - mfc0 v1, CP0_CAUSE - LONG_S $5, PT_R5(sp) - LONG_S v1, PT_CAUSE(sp) - LONG_S $6, PT_R6(sp) - MFC0 v1, CP0_EPC - LONG_S $7, PT_R7(sp) -#ifdef CONFIG_64BIT - LONG_S $8, PT_R8(sp) - LONG_S $9, PT_R9(sp) -#endif - LONG_S v1, PT_EPC(sp) - LONG_S $25, PT_R25(sp) - LONG_S $28, PT_R28(sp) - LONG_S $31, PT_R31(sp) - ori $28, sp, _THREAD_MASK - xori $28, _THREAD_MASK - .set pop - .endm - - .macro SAVE_ALL - SAVE_SOME - SAVE_AT - SAVE_TEMP - SAVE_STATIC - .endm - - .macro RESTORE_AT - .set push - .set noat - LONG_L $1, PT_R1(sp) - .set pop - .endm - - .macro RESTORE_TEMP -#ifdef CONFIG_CPU_HAS_SMARTMIPS - LONG_L $24, PT_ACX(sp) - mtlhx $24 - LONG_L $24, PT_HI(sp) - mtlhx $24 - LONG_L $24, PT_LO(sp) - mtlhx $24 -#else - LONG_L $24, PT_LO(sp) - mtlo $24 - LONG_L $24, PT_HI(sp) - mthi $24 -#endif -#ifdef CONFIG_32BIT - LONG_L $8, PT_R8(sp) - LONG_L $9, PT_R9(sp) -#endif - LONG_L $10, PT_R10(sp) - LONG_L $11, PT_R11(sp) - LONG_L $12, PT_R12(sp) - LONG_L $13, PT_R13(sp) - LONG_L $14, PT_R14(sp) - LONG_L $15, PT_R15(sp) - LONG_L $24, PT_R24(sp) - .endm - - .macro RESTORE_STATIC - LONG_L $16, PT_R16(sp) - LONG_L $17, PT_R17(sp) - LONG_L $18, PT_R18(sp) - LONG_L $19, PT_R19(sp) - LONG_L $20, PT_R20(sp) - LONG_L $21, PT_R21(sp) - LONG_L $22, PT_R22(sp) - LONG_L $23, PT_R23(sp) - LONG_L $30, PT_R30(sp) - .endm - -#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) - - .macro RESTORE_SOME - .set push - .set reorder - .set noat - mfc0 a0, CP0_STATUS - li v1, 0xff00 - ori a0, STATMASK - xori a0, STATMASK - mtc0 a0, CP0_STATUS - and a0, v1 - LONG_L v0, PT_STATUS(sp) - nor v1, $0, v1 - and v0, v1 - or v0, a0 - mtc0 v0, CP0_STATUS - LONG_L $31, PT_R31(sp) - LONG_L $28, PT_R28(sp) - LONG_L $25, PT_R25(sp) - LONG_L $7, PT_R7(sp) - LONG_L $6, PT_R6(sp) - LONG_L $5, PT_R5(sp) - LONG_L $4, PT_R4(sp) - LONG_L $3, PT_R3(sp) - LONG_L $2, PT_R2(sp) - .set pop - .endm - - .macro RESTORE_SP_AND_RET - .set push - .set noreorder - LONG_L k0, PT_EPC(sp) - LONG_L sp, PT_R29(sp) - jr k0 - rfe - .set pop - .endm - -#else - .macro RESTORE_SOME - .set push - .set reorder - .set noat -#ifdef CONFIG_MIPS_MT_SMTC - .set mips32r2 - /* - * We need to make sure the read-modify-write - * of Status below isn't perturbed by an interrupt - * or cross-TC access, so we need to do at least a DMT, - * protected by an interrupt-inhibit. But setting IXMT - * also creates a few-cycle window where an IPI could - * be queued and not be detected before potentially - * returning to a WAIT or user-mode loop. It must be - * replayed. - * - * We're in the middle of a context switch, and - * we can't dispatch it directly without trashing - * some registers, so we'll try to detect this unlikely - * case and program a software interrupt in the VPE, - * as would be done for a cross-VPE IPI. To accomodate - * the handling of that case, we're doing a DVPE instead - * of just a DMT here to protect against other threads. - * This is a lot of cruft to cover a tiny window. - * If you can find a better design, implement it! - * - */ - mfc0 v0, CP0_TCSTATUS - ori v0, TCSTATUS_IXMT - mtc0 v0, CP0_TCSTATUS - _ehb - DVPE 5 # dvpe a1 - jal mips_ihb -#endif /* CONFIG_MIPS_MT_SMTC */ - mfc0 a0, CP0_STATUS - ori a0, STATMASK - xori a0, STATMASK - mtc0 a0, CP0_STATUS - li v1, 0xff00 - and a0, v1 - LONG_L v0, PT_STATUS(sp) - nor v1, $0, v1 - and v0, v1 - or v0, a0 - mtc0 v0, CP0_STATUS -#ifdef CONFIG_MIPS_MT_SMTC -/* - * Only after EXL/ERL have been restored to status can we - * restore TCStatus.IXMT. - */ - LONG_L v1, PT_TCSTATUS(sp) - _ehb - mfc0 a0, CP0_TCSTATUS - andi v1, TCSTATUS_IXMT - bnez v1, 0f - -/* - * We'd like to detect any IPIs queued in the tiny window - * above and request an software interrupt to service them - * when we ERET. - * - * Computing the offset into the IPIQ array of the executing - * TC's IPI queue in-line would be tedious. We use part of - * the TCContext register to hold 16 bits of offset that we - * can add in-line to find the queue head. - */ - mfc0 v0, CP0_TCCONTEXT - la a2, IPIQ - srl v0, v0, 16 - addu a2, a2, v0 - LONG_L v0, 0(a2) - beqz v0, 0f -/* - * If we have a queue, provoke dispatch within the VPE by setting C_SW1 - */ - mfc0 v0, CP0_CAUSE - ori v0, v0, C_SW1 - mtc0 v0, CP0_CAUSE -0: - /* - * This test should really never branch but - * let's be prudent here. Having atomized - * the shared register modifications, we can - * now EVPE, and must do so before interrupts - * are potentially re-enabled. - */ - andi a1, a1, MVPCONTROL_EVP - beqz a1, 1f - evpe -1: - /* We know that TCStatua.IXMT should be set from above */ - xori a0, a0, TCSTATUS_IXMT - or a0, a0, v1 - mtc0 a0, CP0_TCSTATUS - _ehb - - .set mips0 -#endif /* CONFIG_MIPS_MT_SMTC */ - LONG_L v1, PT_EPC(sp) - MTC0 v1, CP0_EPC - LONG_L $31, PT_R31(sp) - LONG_L $28, PT_R28(sp) - LONG_L $25, PT_R25(sp) -#ifdef CONFIG_64BIT - LONG_L $8, PT_R8(sp) - LONG_L $9, PT_R9(sp) -#endif - LONG_L $7, PT_R7(sp) - LONG_L $6, PT_R6(sp) - LONG_L $5, PT_R5(sp) - LONG_L $4, PT_R4(sp) - LONG_L $3, PT_R3(sp) - LONG_L $2, PT_R2(sp) - .set pop - .endm - - .macro RESTORE_SP_AND_RET - LONG_L sp, PT_R29(sp) - .set mips3 - eret - .set mips0 - .endm - -#endif - - .macro RESTORE_SP - LONG_L sp, PT_R29(sp) - .endm - - .macro RESTORE_ALL - RESTORE_TEMP - RESTORE_STATIC - RESTORE_AT - RESTORE_SOME - RESTORE_SP - .endm - - .macro RESTORE_ALL_AND_RET - RESTORE_TEMP - RESTORE_STATIC - RESTORE_AT - RESTORE_SOME - RESTORE_SP_AND_RET - .endm - -/* - * Move to kernel mode and disable interrupts. - * Set cp0 enable bit as sign that we're running on the kernel stack - */ - .macro CLI -#if !defined(CONFIG_MIPS_MT_SMTC) - mfc0 t0, CP0_STATUS - li t1, ST0_CU0 | STATMASK - or t0, t1 - xori t0, STATMASK - mtc0 t0, CP0_STATUS -#else /* CONFIG_MIPS_MT_SMTC */ - /* - * For SMTC, we need to set privilege - * and disable interrupts only for the - * current TC, using the TCStatus register. - */ - mfc0 t0, CP0_TCSTATUS - /* Fortunately CU 0 is in the same place in both registers */ - /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */ - li t1, ST0_CU0 | 0x08001c00 - or t0, t1 - /* Clear TKSU, leave IXMT */ - xori t0, 0x00001800 - mtc0 t0, CP0_TCSTATUS - _ehb - /* We need to leave the global IE bit set, but clear EXL...*/ - mfc0 t0, CP0_STATUS - ori t0, ST0_EXL | ST0_ERL - xori t0, ST0_EXL | ST0_ERL - mtc0 t0, CP0_STATUS -#endif /* CONFIG_MIPS_MT_SMTC */ - irq_disable_hazard - .endm - -/* - * Move to kernel mode and enable interrupts. - * Set cp0 enable bit as sign that we're running on the kernel stack - */ - .macro STI -#if !defined(CONFIG_MIPS_MT_SMTC) - mfc0 t0, CP0_STATUS - li t1, ST0_CU0 | STATMASK - or t0, t1 - xori t0, STATMASK & ~1 - mtc0 t0, CP0_STATUS -#else /* CONFIG_MIPS_MT_SMTC */ - /* - * For SMTC, we need to set privilege - * and enable interrupts only for the - * current TC, using the TCStatus register. - */ - _ehb - mfc0 t0, CP0_TCSTATUS - /* Fortunately CU 0 is in the same place in both registers */ - /* Set TCU0, TKSU (for later inversion) and IXMT */ - li t1, ST0_CU0 | 0x08001c00 - or t0, t1 - /* Clear TKSU *and* IXMT */ - xori t0, 0x00001c00 - mtc0 t0, CP0_TCSTATUS - _ehb - /* We need to leave the global IE bit set, but clear EXL...*/ - mfc0 t0, CP0_STATUS - ori t0, ST0_EXL - xori t0, ST0_EXL - mtc0 t0, CP0_STATUS - /* irq_enable_hazard below should expand to EHB for 24K/34K cpus */ -#endif /* CONFIG_MIPS_MT_SMTC */ - irq_enable_hazard - .endm - -/* - * Just move to kernel mode and leave interrupts as they are. Note - * for the R3000 this means copying the previous enable from IEp. - * Set cp0 enable bit as sign that we're running on the kernel stack - */ - .macro KMODE -#ifdef CONFIG_MIPS_MT_SMTC - /* - * This gets baroque in SMTC. We want to - * protect the non-atomic clearing of EXL - * with DMT/EMT, but we don't want to take - * an interrupt while DMT is still in effect. - */ - - /* KMODE gets invoked from both reorder and noreorder code */ - .set push - .set mips32r2 - .set noreorder - mfc0 v0, CP0_TCSTATUS - andi v1, v0, TCSTATUS_IXMT - ori v0, TCSTATUS_IXMT - mtc0 v0, CP0_TCSTATUS - _ehb - DMT 2 # dmt v0 - /* - * We don't know a priori if ra is "live" - */ - move t0, ra - jal mips_ihb - nop /* delay slot */ - move ra, t0 -#endif /* CONFIG_MIPS_MT_SMTC */ - mfc0 t0, CP0_STATUS - li t1, ST0_CU0 | (STATMASK & ~1) -#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) - andi t2, t0, ST0_IEP - srl t2, 2 - or t0, t2 -#endif - or t0, t1 - xori t0, STATMASK & ~1 - mtc0 t0, CP0_STATUS -#ifdef CONFIG_MIPS_MT_SMTC - _ehb - andi v0, v0, VPECONTROL_TE - beqz v0, 2f - nop /* delay slot */ - emt -2: - mfc0 v0, CP0_TCSTATUS - /* Clear IXMT, then OR in previous value */ - ori v0, TCSTATUS_IXMT - xori v0, TCSTATUS_IXMT - or v0, v1, v0 - mtc0 v0, CP0_TCSTATUS - /* - * irq_disable_hazard below should expand to EHB - * on 24K/34K CPUS - */ - .set pop -#endif /* CONFIG_MIPS_MT_SMTC */ - irq_disable_hazard - .endm - -#endif /* _ASM_STACKFRAME_H */ diff --git a/include/asm-mips/stacktrace.h b/include/asm-mips/stacktrace.h deleted file mode 100644 index 0bf82818aa53..000000000000 --- a/include/asm-mips/stacktrace.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef _ASM_STACKTRACE_H -#define _ASM_STACKTRACE_H - -#include - -#ifdef CONFIG_KALLSYMS -extern int raw_show_trace; -extern unsigned long unwind_stack(struct task_struct *task, unsigned long *sp, - unsigned long pc, unsigned long *ra); -#else -#define raw_show_trace 1 -static inline unsigned long unwind_stack(struct task_struct *task, - unsigned long *sp, unsigned long pc, unsigned long *ra) -{ - return 0; -} -#endif - -static __always_inline void prepare_frametrace(struct pt_regs *regs) -{ -#ifndef CONFIG_KALLSYMS - /* - * Remove any garbage that may be in regs (specially func - * addresses) to avoid show_raw_backtrace() to report them - */ - memset(regs, 0, sizeof(*regs)); -#endif - __asm__ __volatile__( - ".set push\n\t" - ".set noat\n\t" -#ifdef CONFIG_64BIT - "1: dla $1, 1b\n\t" - "sd $1, %0\n\t" - "sd $29, %1\n\t" - "sd $31, %2\n\t" -#else - "1: la $1, 1b\n\t" - "sw $1, %0\n\t" - "sw $29, %1\n\t" - "sw $31, %2\n\t" -#endif - ".set pop\n\t" - : "=m" (regs->cp0_epc), - "=m" (regs->regs[29]), "=m" (regs->regs[31]) - : : "memory"); -} - -#endif /* _ASM_STACKTRACE_H */ diff --git a/include/asm-mips/stat.h b/include/asm-mips/stat.h deleted file mode 100644 index 6e00f751ab6d..000000000000 --- a/include/asm-mips/stat.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1999, 2000 Ralf Baechle - * Copyright (C) 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_STAT_H -#define _ASM_STAT_H - -#include - -#include - -#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32) - -struct stat { - unsigned st_dev; - long st_pad1[3]; /* Reserved for network id */ - ino_t st_ino; - mode_t st_mode; - nlink_t st_nlink; - uid_t st_uid; - gid_t st_gid; - unsigned st_rdev; - long st_pad2[2]; - off_t st_size; - long st_pad3; - /* - * Actually this should be timestruc_t st_atime, st_mtime and st_ctime - * but we don't have it under Linux. - */ - time_t st_atime; - long st_atime_nsec; - time_t st_mtime; - long st_mtime_nsec; - time_t st_ctime; - long st_ctime_nsec; - long st_blksize; - long st_blocks; - long st_pad4[14]; -}; - -/* - * This matches struct stat64 in glibc2.1, hence the absolutely insane - * amounts of padding around dev_t's. The memory layout is the same as of - * struct stat of the 64-bit kernel. - */ - -struct stat64 { - unsigned long st_dev; - unsigned long st_pad0[3]; /* Reserved for st_dev expansion */ - - unsigned long long st_ino; - - mode_t st_mode; - nlink_t st_nlink; - - uid_t st_uid; - gid_t st_gid; - - unsigned long st_rdev; - unsigned long st_pad1[3]; /* Reserved for st_rdev expansion */ - - long long st_size; - - /* - * Actually this should be timestruc_t st_atime, st_mtime and st_ctime - * but we don't have it under Linux. - */ - time_t st_atime; - unsigned long st_atime_nsec; /* Reserved for st_atime expansion */ - - time_t st_mtime; - unsigned long st_mtime_nsec; /* Reserved for st_mtime expansion */ - - time_t st_ctime; - unsigned long st_ctime_nsec; /* Reserved for st_ctime expansion */ - - unsigned long st_blksize; - unsigned long st_pad2; - - long long st_blocks; -}; - -#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ - -#if _MIPS_SIM == _MIPS_SIM_ABI64 - -/* The memory layout is the same as of struct stat64 of the 32-bit kernel. */ -struct stat { - unsigned int st_dev; - unsigned int st_pad0[3]; /* Reserved for st_dev expansion */ - - unsigned long st_ino; - - mode_t st_mode; - nlink_t st_nlink; - - uid_t st_uid; - gid_t st_gid; - - unsigned int st_rdev; - unsigned int st_pad1[3]; /* Reserved for st_rdev expansion */ - - off_t st_size; - - /* - * Actually this should be timestruc_t st_atime, st_mtime and st_ctime - * but we don't have it under Linux. - */ - unsigned int st_atime; - unsigned int st_atime_nsec; - - unsigned int st_mtime; - unsigned int st_mtime_nsec; - - unsigned int st_ctime; - unsigned int st_ctime_nsec; - - unsigned int st_blksize; - unsigned int st_pad2; - - unsigned long st_blocks; -}; - -#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ - -#define STAT_HAVE_NSEC 1 - -#endif /* _ASM_STAT_H */ diff --git a/include/asm-mips/statfs.h b/include/asm-mips/statfs.h deleted file mode 100644 index c3ddf973c1c0..000000000000 --- a/include/asm-mips/statfs.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1999 by Ralf Baechle - */ -#ifndef _ASM_STATFS_H -#define _ASM_STATFS_H - -#include -#include - -#ifndef __KERNEL_STRICT_NAMES - -#include - -typedef __kernel_fsid_t fsid_t; - -#endif - -struct statfs { - long f_type; -#define f_fstyp f_type - long f_bsize; - long f_frsize; /* Fragment size - unsupported */ - long f_blocks; - long f_bfree; - long f_files; - long f_ffree; - long f_bavail; - - /* Linux specials */ - __kernel_fsid_t f_fsid; - long f_namelen; - long f_spare[6]; -}; - -#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32) - -/* - * Unlike the traditional version the LFAPI version has none of the ABI junk - */ -struct statfs64 { - __u32 f_type; - __u32 f_bsize; - __u32 f_frsize; /* Fragment size - unsupported */ - __u32 __pad; - __u64 f_blocks; - __u64 f_bfree; - __u64 f_files; - __u64 f_ffree; - __u64 f_bavail; - __kernel_fsid_t f_fsid; - __u32 f_namelen; - __u32 f_spare[6]; -}; - -#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ - -#if _MIPS_SIM == _MIPS_SIM_ABI64 - -struct statfs64 { /* Same as struct statfs */ - long f_type; - long f_bsize; - long f_frsize; /* Fragment size - unsupported */ - long f_blocks; - long f_bfree; - long f_files; - long f_ffree; - long f_bavail; - - /* Linux specials */ - __kernel_fsid_t f_fsid; - long f_namelen; - long f_spare[6]; -}; - -struct compat_statfs64 { - __u32 f_type; - __u32 f_bsize; - __u32 f_frsize; /* Fragment size - unsupported */ - __u32 __pad; - __u64 f_blocks; - __u64 f_bfree; - __u64 f_files; - __u64 f_ffree; - __u64 f_bavail; - __kernel_fsid_t f_fsid; - __u32 f_namelen; - __u32 f_spare[6]; -}; - -#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ - -#endif /* _ASM_STATFS_H */ diff --git a/include/asm-mips/string.h b/include/asm-mips/string.h deleted file mode 100644 index 436e3ad352d9..000000000000 --- a/include/asm-mips/string.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 1994, 95, 96, 97, 98, 2000, 01 Ralf Baechle - * Copyright (c) 2000 by Silicon Graphics, Inc. - * Copyright (c) 2001 MIPS Technologies, Inc. - */ -#ifndef _ASM_STRING_H -#define _ASM_STRING_H - - -/* - * Most of the inline functions are rather naive implementations so I just - * didn't bother updating them for 64-bit ... - */ -#ifdef CONFIG_32BIT - -#ifndef IN_STRING_C - -#define __HAVE_ARCH_STRCPY -static __inline__ char *strcpy(char *__dest, __const__ char *__src) -{ - char *__xdest = __dest; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n" - "1:\tlbu\t$1,(%1)\n\t" - "addiu\t%1,1\n\t" - "sb\t$1,(%0)\n\t" - "bnez\t$1,1b\n\t" - "addiu\t%0,1\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (__dest), "=r" (__src) - : "0" (__dest), "1" (__src) - : "memory"); - - return __xdest; -} - -#define __HAVE_ARCH_STRNCPY -static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n) -{ - char *__xdest = __dest; - - if (__n == 0) - return __xdest; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n" - "1:\tlbu\t$1,(%1)\n\t" - "subu\t%2,1\n\t" - "sb\t$1,(%0)\n\t" - "beqz\t$1,2f\n\t" - "addiu\t%0,1\n\t" - "bnez\t%2,1b\n\t" - "addiu\t%1,1\n" - "2:\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (__dest), "=r" (__src), "=r" (__n) - : "0" (__dest), "1" (__src), "2" (__n) - : "memory"); - - return __xdest; -} - -#define __HAVE_ARCH_STRCMP -static __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct) -{ - int __res; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n\t" - "lbu\t%2,(%0)\n" - "1:\tlbu\t$1,(%1)\n\t" - "addiu\t%0,1\n\t" - "bne\t$1,%2,2f\n\t" - "addiu\t%1,1\n\t" - "bnez\t%2,1b\n\t" - "lbu\t%2,(%0)\n\t" -#if defined(CONFIG_CPU_R3000) - "nop\n\t" -#endif - "move\t%2,$1\n" - "2:\tsubu\t%2,$1\n" - "3:\t.set\tat\n\t" - ".set\treorder" - : "=r" (__cs), "=r" (__ct), "=r" (__res) - : "0" (__cs), "1" (__ct)); - - return __res; -} - -#endif /* !defined(IN_STRING_C) */ - -#define __HAVE_ARCH_STRNCMP -static __inline__ int -strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count) -{ - int __res; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n" - "1:\tlbu\t%3,(%0)\n\t" - "beqz\t%2,2f\n\t" - "lbu\t$1,(%1)\n\t" - "subu\t%2,1\n\t" - "bne\t$1,%3,3f\n\t" - "addiu\t%0,1\n\t" - "bnez\t%3,1b\n\t" - "addiu\t%1,1\n" - "2:\n\t" -#if defined(CONFIG_CPU_R3000) - "nop\n\t" -#endif - "move\t%3,$1\n" - "3:\tsubu\t%3,$1\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (__cs), "=r" (__ct), "=r" (__count), "=r" (__res) - : "0" (__cs), "1" (__ct), "2" (__count)); - - return __res; -} -#endif /* CONFIG_32BIT */ - -#define __HAVE_ARCH_MEMSET -extern void *memset(void *__s, int __c, size_t __count); - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *__to, __const__ void *__from, size_t __n); - -#define __HAVE_ARCH_MEMMOVE -extern void *memmove(void *__dest, __const__ void *__src, size_t __n); - -#endif /* _ASM_STRING_H */ diff --git a/include/asm-mips/suspend.h b/include/asm-mips/suspend.h deleted file mode 100644 index 2562f8f9be0e..000000000000 --- a/include/asm-mips/suspend.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SUSPEND_H -#define __ASM_SUSPEND_H - -/* Somewhen... Maybe :-) */ - -#endif /* __ASM_SUSPEND_H */ diff --git a/include/asm-mips/sysmips.h b/include/asm-mips/sysmips.h deleted file mode 100644 index 4f47b7d6a5f7..000000000000 --- a/include/asm-mips/sysmips.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Definitions for the MIPS sysmips(2) call - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 by Ralf Baechle - */ -#ifndef _ASM_SYSMIPS_H -#define _ASM_SYSMIPS_H - -/* - * Commands for the sysmips(2) call - * - * sysmips(2) is deprecated - though some existing software uses it. - * We only support the following commands. - */ -#define SETNAME 1 /* set hostname */ -#define FLUSH_CACHE 3 /* writeback and invalidate caches */ -#define MIPS_FIXADE 7 /* control address error fixing */ -#define MIPS_RDNVRAM 10 /* read NVRAM */ -#define MIPS_ATOMIC_SET 2001 /* atomically set variable */ - -#endif /* _ASM_SYSMIPS_H */ diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h deleted file mode 100644 index a944eda4faf5..000000000000 --- a/include/asm-mips/system.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003, 06 by Ralf Baechle - * Copyright (C) 1996 by Paul M. Antoine - * Copyright (C) 1999 Silicon Graphics - * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. - */ -#ifndef _ASM_SYSTEM_H -#define _ASM_SYSTEM_H - -#include -#include - -#include -#include -#include -#include -#include -#include - - -/* - * switch_to(n) should switch tasks to task nr n, first - * checking that n isn't the current task, in which case it does nothing. - */ -extern asmlinkage void *resume(void *last, void *next, void *next_ti); - -struct task_struct; - -#ifdef CONFIG_MIPS_MT_FPAFF - -/* - * Handle the scheduler resume end of FPU affinity management. We do this - * inline to try to keep the overhead down. If we have been forced to run on - * a "CPU" with an FPU because of a previous high level of FP computation, - * but did not actually use the FPU during the most recent time-slice (CU1 - * isn't set), we undo the restriction on cpus_allowed. - * - * We're not calling set_cpus_allowed() here, because we have no need to - * force prompt migration - we're already switching the current CPU to a - * different thread. - */ - -#define __mips_mt_fpaff_switch_to(prev) \ -do { \ - struct thread_info *__prev_ti = task_thread_info(prev); \ - \ - if (cpu_has_fpu && \ - test_ti_thread_flag(__prev_ti, TIF_FPUBOUND) && \ - (!(KSTK_STATUS(prev) & ST0_CU1))) { \ - clear_ti_thread_flag(__prev_ti, TIF_FPUBOUND); \ - prev->cpus_allowed = prev->thread.user_cpus_allowed; \ - } \ - next->thread.emulated_fp = 0; \ -} while(0) - -#else -#define __mips_mt_fpaff_switch_to(prev) do { (void) (prev); } while (0) -#endif - -#define switch_to(prev, next, last) \ -do { \ - __mips_mt_fpaff_switch_to(prev); \ - if (cpu_has_dsp) \ - __save_dsp(prev); \ - (last) = resume(prev, next, task_thread_info(next)); \ -} while (0) - -#define finish_arch_switch(prev) \ -do { \ - if (cpu_has_dsp) \ - __restore_dsp(current); \ - if (cpu_has_userlocal) \ - write_c0_userlocal(current_thread_info()->tp_value); \ -} while (0) - -static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) -{ - __u32 retval; - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long dummy; - - __asm__ __volatile__( - " .set mips3 \n" - "1: ll %0, %3 # xchg_u32 \n" - " .set mips0 \n" - " move %2, %z4 \n" - " .set mips3 \n" - " sc %2, %1 \n" - " beqzl %2, 1b \n" - " .set mips0 \n" - : "=&r" (retval), "=m" (*m), "=&r" (dummy) - : "R" (*m), "Jr" (val) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long dummy; - - __asm__ __volatile__( - " .set mips3 \n" - "1: ll %0, %3 # xchg_u32 \n" - " .set mips0 \n" - " move %2, %z4 \n" - " .set mips3 \n" - " sc %2, %1 \n" - " beqz %2, 2f \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (retval), "=m" (*m), "=&r" (dummy) - : "R" (*m), "Jr" (val) - : "memory"); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - retval = *m; - *m = val; - raw_local_irq_restore(flags); /* implies memory barrier */ - } - - smp_llsc_mb(); - - return retval; -} - -#ifdef CONFIG_64BIT -static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) -{ - __u64 retval; - - if (cpu_has_llsc && R10000_LLSC_WAR) { - unsigned long dummy; - - __asm__ __volatile__( - " .set mips3 \n" - "1: lld %0, %3 # xchg_u64 \n" - " move %2, %z4 \n" - " scd %2, %1 \n" - " beqzl %2, 1b \n" - " .set mips0 \n" - : "=&r" (retval), "=m" (*m), "=&r" (dummy) - : "R" (*m), "Jr" (val) - : "memory"); - } else if (cpu_has_llsc) { - unsigned long dummy; - - __asm__ __volatile__( - " .set mips3 \n" - "1: lld %0, %3 # xchg_u64 \n" - " move %2, %z4 \n" - " scd %2, %1 \n" - " beqz %2, 2f \n" - " .subsection 2 \n" - "2: b 1b \n" - " .previous \n" - " .set mips0 \n" - : "=&r" (retval), "=m" (*m), "=&r" (dummy) - : "R" (*m), "Jr" (val) - : "memory"); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - retval = *m; - *m = val; - raw_local_irq_restore(flags); /* implies memory barrier */ - } - - smp_llsc_mb(); - - return retval; -} -#else -extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 val); -#define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels -#endif - -/* This function doesn't exist, so you'll get a linker error - if something tries to do an invalid xchg(). */ -extern void __xchg_called_with_bad_pointer(void); - -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - switch (size) { - case 4: - return __xchg_u32(ptr, x); - case 8: - return __xchg_u64(ptr, x); - } - __xchg_called_with_bad_pointer(); - return x; -} - -#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) - -extern void set_handler(unsigned long offset, void *addr, unsigned long len); -extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len); - -typedef void (*vi_handler_t)(void); -extern void *set_vi_handler(int n, vi_handler_t addr); - -extern void *set_except_vector(int n, void *addr); -extern unsigned long ebase; -extern void per_cpu_trap_init(void); - -/* - * See include/asm-ia64/system.h; prevents deadlock on SMP - * systems. - */ -#define __ARCH_WANT_UNLOCKED_CTXSW - -extern unsigned long arch_align_stack(unsigned long sp); - -#endif /* _ASM_SYSTEM_H */ diff --git a/include/asm-mips/termbits.h b/include/asm-mips/termbits.h deleted file mode 100644 index c83c68444e86..000000000000 --- a/include/asm-mips/termbits.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 96, 99, 2001, 06 Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - * Copyright (C) 2001 MIPS Technologies, Inc. - */ -#ifndef _ASM_TERMBITS_H -#define _ASM_TERMBITS_H - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -/* - * The ABI says nothing about NCC but seems to use NCCS as - * replacement for it in struct termio - */ -#define NCCS 23 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 /* Interrupt character [ISIG]. */ -#define VQUIT 1 /* Quit character [ISIG]. */ -#define VERASE 2 /* Erase character [ICANON]. */ -#define VKILL 3 /* Kill-line character [ICANON]. */ -#define VMIN 4 /* Minimum number of bytes read at once [!ICANON]. */ -#define VTIME 5 /* Time-out value (tenths of a second) [!ICANON]. */ -#define VEOL2 6 /* Second EOL character [ICANON]. */ -#define VSWTC 7 /* ??? */ -#define VSWTCH VSWTC -#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF]. */ -#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF]. */ -#define VSUSP 10 /* Suspend character [ISIG]. */ -#if 0 -/* - * VDSUSP is not supported - */ -#define VDSUSP 11 /* Delayed suspend character [ISIG]. */ -#endif -#define VREPRINT 12 /* Reprint-line character [ICANON]. */ -#define VDISCARD 13 /* Discard character [IEXTEN]. */ -#define VWERASE 14 /* Word-erase character [ICANON]. */ -#define VLNEXT 15 /* Literal-next character [IEXTEN]. */ -#define VEOF 16 /* End-of-file character [ICANON]. */ -#define VEOL 17 /* End-of-line character [ICANON]. */ - -/* c_iflag bits */ -#define IGNBRK 0000001 /* Ignore break condition. */ -#define BRKINT 0000002 /* Signal interrupt on break. */ -#define IGNPAR 0000004 /* Ignore characters with parity errors. */ -#define PARMRK 0000010 /* Mark parity and framing errors. */ -#define INPCK 0000020 /* Enable input parity check. */ -#define ISTRIP 0000040 /* Strip 8th bit off characters. */ -#define INLCR 0000100 /* Map NL to CR on input. */ -#define IGNCR 0000200 /* Ignore CR. */ -#define ICRNL 0000400 /* Map CR to NL on input. */ -#define IUCLC 0001000 /* Map upper case to lower case on input. */ -#define IXON 0002000 /* Enable start/stop output control. */ -#define IXANY 0004000 /* Any character will restart after stop. */ -#define IXOFF 0010000 /* Enable start/stop input control. */ -#define IMAXBEL 0020000 /* Ring bell when input queue is full. */ -#define IUTF8 0040000 /* Input is UTF-8 */ - -/* c_oflag bits */ -#define OPOST 0000001 /* Perform output processing. */ -#define OLCUC 0000002 /* Map lower case to upper case on output. */ -#define ONLCR 0000004 /* Map NL to CR-NL on output. */ -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 -/* -#define PAGEOUT ??? -#define WRAP ??? - */ - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 /* Number of bits per byte (mask). */ -#define CS5 0000000 /* 5 bits per byte. */ -#define CS6 0000020 /* 6 bits per byte. */ -#define CS7 0000040 /* 7 bits per byte. */ -#define CS8 0000060 /* 8 bits per byte. */ -#define CSTOPB 0000100 /* Two stop bits instead of one. */ -#define CREAD 0000200 /* Enable receiver. */ -#define PARENB 0000400 /* Parity enable. */ -#define PARODD 0001000 /* Odd parity instead of even. */ -#define HUPCL 0002000 /* Hang up on last close. */ -#define CLOCAL 0004000 /* Ignore modem status lines. */ -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 /* Enable signals. */ -#define ICANON 0000002 /* Do erase and kill processing. */ -#define XCASE 0000004 -#define ECHO 0000010 /* Enable echo. */ -#define ECHOE 0000020 /* Visual erase for ERASE. */ -#define ECHOK 0000040 /* Echo NL after KILL. */ -#define ECHONL 0000100 /* Echo NL even if ECHO is off. */ -#define NOFLSH 0000200 /* Disable flush after interrupt. */ -#define IEXTEN 0000400 /* Enable DISCARD and LNEXT. */ -#define ECHOCTL 0001000 /* Echo control characters as ^X. */ -#define ECHOPRT 0002000 /* Hardcopy visual erase. */ -#define ECHOKE 0004000 /* Visual erase for KILL. */ -#define FLUSHO 0020000 -#define PENDIN 0040000 /* Retype pending input (state). */ -#define TOSTOP 0100000 /* Send SIGTTOU for background output. */ -#define ITOSTOP TOSTOP - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 /* Suspend output. */ -#define TCOON 1 /* Restart suspended output. */ -#define TCIOFF 2 /* Send a STOP character. */ -#define TCION 3 /* Send a START character. */ - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 /* Discard data received but not yet read. */ -#define TCOFLUSH 1 /* Discard data written but not yet sent. */ -#define TCIOFLUSH 2 /* Discard all pending data. */ - -/* tcsetattr uses these */ -#define TCSANOW TCSETS /* Change immediately. */ -#define TCSADRAIN TCSETSW /* Change when pending output is written. */ -#define TCSAFLUSH TCSETSF /* Flush pending input before changing. */ - -#endif /* _ASM_TERMBITS_H */ diff --git a/include/asm-mips/termios.h b/include/asm-mips/termios.h deleted file mode 100644 index a275661fa7e1..000000000000 --- a/include/asm-mips/termios.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 2000, 2001 by Ralf Baechle - * Copyright (C) 2000, 2001 Silicon Graphics, Inc. - */ -#ifndef _ASM_TERMIOS_H -#define _ASM_TERMIOS_H - -#include -#include - -struct sgttyb { - char sg_ispeed; - char sg_ospeed; - char sg_erase; - char sg_kill; - int sg_flags; /* SGI special - int, not short */ -}; - -struct tchars { - char t_intrc; - char t_quitc; - char t_startc; - char t_stopc; - char t_eofc; - char t_brkc; -}; - -struct ltchars { - char t_suspc; /* stop process signal */ - char t_dsuspc; /* delayed stop process signal */ - char t_rprntc; /* reprint line */ - char t_flushc; /* flush output (toggles) */ - char t_werasc; /* word erase */ - char t_lnextc; /* literal next character */ -}; - -/* TIOCGSIZE, TIOCSSIZE not defined yet. Only needed for SunOS source - compatibility anyway ... */ - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - char c_line; /* line discipline */ - unsigned char c_cc[NCCS]; /* control characters */ -}; - -#ifdef __KERNEL__ -#include - -/* - * intr=^C quit=^\ erase=del kill=^U - * vmin=\1 vtime=\0 eol2=\0 swtc=\0 - * start=^Q stop=^S susp=^Z vdsusp= - * reprint=^R discard=^U werase=^W lnext=^V - * eof=^D eol=\0 - */ -#define INIT_C_CC "\003\034\177\025\1\0\0\0\021\023\032\0\022\017\027\026\004\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 /* line enable */ -#define TIOCM_DTR 0x002 /* data terminal ready */ -#define TIOCM_RTS 0x004 /* request to send */ -#define TIOCM_ST 0x010 /* secondary transmit */ -#define TIOCM_SR 0x020 /* secondary receive */ -#define TIOCM_CTS 0x040 /* clear to send */ -#define TIOCM_CAR 0x100 /* carrier detect */ -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RNG 0x200 /* ring */ -#define TIOCM_RI TIOCM_RNG -#define TIOCM_DSR 0x400 /* data set ready */ -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -#ifdef __KERNEL__ - -#include - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - unsigned short tmp; \ - get_user(tmp, &(termio)->c_iflag); \ - (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ - get_user(tmp, &(termio)->c_oflag); \ - (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ - get_user(tmp, &(termio)->c_cflag); \ - (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ - get_user(tmp, &(termio)->c_lflag); \ - (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ - get_user((termios)->c_line, &(termio)->c_line); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* defined(__KERNEL__) */ - -#endif /* _ASM_TERMIOS_H */ diff --git a/include/asm-mips/thread_info.h b/include/asm-mips/thread_info.h deleted file mode 100644 index bb3060699df2..000000000000 --- a/include/asm-mips/thread_info.h +++ /dev/null @@ -1,151 +0,0 @@ -/* thread_info.h: MIPS low-level thread information - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - - -#ifndef __ASSEMBLY__ - -#include - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, the assembly constants - * must also be changed - */ -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - unsigned long tp_value; /* thread pointer */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ - - mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF for user-thead - 0-0xFFFFFFFF for kernel-thread - */ - struct restart_block restart_block; - struct pt_regs *regs; -}; - -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = _TIF_FIXADE, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* How to get the thread information struct from C. */ -register struct thread_info *__current_thread_info __asm__("$28"); -#define current_thread_info() __current_thread_info - -/* thread information allocation */ -#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT) -#define THREAD_SIZE_ORDER (1) -#endif -#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_64BIT) -#define THREAD_SIZE_ORDER (2) -#endif -#ifdef CONFIG_PAGE_SIZE_8KB -#define THREAD_SIZE_ORDER (1) -#endif -#ifdef CONFIG_PAGE_SIZE_16KB -#define THREAD_SIZE_ORDER (0) -#endif -#ifdef CONFIG_PAGE_SIZE_64KB -#define THREAD_SIZE_ORDER (0) -#endif - -#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) -#define THREAD_MASK (THREAD_SIZE - 1UL) - -#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) \ -({ \ - struct thread_info *ret; \ - \ - ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \ - \ - ret; \ -}) -#else -#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) -#endif - -#define free_thread_info(info) kfree(info) - -#endif /* !__ASSEMBLY__ */ - -#define PREEMPT_ACTIVE 0x10000000 - -/* - * thread information flags - * - these are process state flags that various assembly files may need to - * access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_SYSCALL_AUDIT 3 /* syscall auditing active */ -#define TIF_SECCOMP 4 /* secure computing */ -#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */ -#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ -#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 18 -#define TIF_FREEZE 19 -#define TIF_FIXADE 20 /* Fix address errors in software */ -#define TIF_LOGADE 21 /* Log address errors to syslog */ -#define TIF_32BIT_REGS 22 /* also implies 16/32 fprs */ -#define TIF_32BIT_ADDR 23 /* 32-bit address space (o32/n32) */ -#define TIF_FPUBOUND 24 /* thread bound to FPU-full CPU set */ -#define TIF_SYSCALL_TRACE 31 /* syscall trace active */ - -#define _TIF_SYSCALL_TRACE (1< -#include -#include -#include - -extern spinlock_t rtc_lock; - -/* - * RTC ops. By default, they point to weak no-op RTC functions. - * rtc_mips_set_time - reverse the above translation and set time to RTC. - * rtc_mips_set_mmss - similar to rtc_set_time, but only min and sec need - * to be set. Used by RTC sync-up. - */ -extern int rtc_mips_set_time(unsigned long); -extern int rtc_mips_set_mmss(unsigned long); - -/* - * board specific routines required by time_init(). - */ -extern void plat_time_init(void); - -/* - * mips_hpt_frequency - must be set if you intend to use an R4k-compatible - * counter as a timer interrupt source. - */ -extern unsigned int mips_hpt_frequency; - -/* - * The performance counter IRQ on MIPS is a close relative to the timer IRQ - * so it lives here. - */ -extern int (*perf_irq)(void); - -/* - * Initialize the calling CPU's compare interrupt as clockevent device - */ -#ifdef CONFIG_CEVT_R4K -extern int mips_clockevent_init(void); -extern unsigned int __weak get_c0_compare_int(void); -#else -static inline int mips_clockevent_init(void) -{ - return -ENXIO; -} -#endif - -/* - * Initialize the count register as a clocksource - */ -#ifdef CONFIG_CEVT_R4K -extern int init_mips_clocksource(void); -#else -static inline int init_mips_clocksource(void) -{ - return 0; -} -#endif - -extern void clocksource_set_clock(struct clocksource *cs, unsigned int clock); -extern void clockevent_set_clock(struct clock_event_device *cd, - unsigned int clock); - -#endif /* _ASM_TIME_H */ diff --git a/include/asm-mips/timex.h b/include/asm-mips/timex.h deleted file mode 100644 index 6529704aa73a..000000000000 --- a/include/asm-mips/timex.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 1999, 2003 by Ralf Baechle - */ -#ifndef _ASM_TIMEX_H -#define _ASM_TIMEX_H - -#ifdef __KERNEL__ - -#include - -/* - * This is the clock rate of the i8253 PIT. A MIPS system may not have - * a PIT by the symbol is used all over the kernel including some APIs. - * So keeping it defined to the number for the PIT is the only sane thing - * for now. - */ -#define CLOCK_TICK_RATE 1193182 - -/* - * Standard way to access the cycle counter. - * Currently only used on SMP for scheduling. - * - * Only the low 32 bits are available as a continuously counting entity. - * But this only means we'll force a reschedule every 8 seconds or so, - * which isn't an evil thing. - * - * We know that all SMP capable CPUs have cycle counters. - */ - -typedef unsigned int cycles_t; - -static inline cycles_t get_cycles(void) -{ - return 0; -} - -#endif /* __KERNEL__ */ - -#endif /* _ASM_TIMEX_H */ diff --git a/include/asm-mips/titan_dep.h b/include/asm-mips/titan_dep.h deleted file mode 100644 index fee1908c65d2..000000000000 --- a/include/asm-mips/titan_dep.h +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright 2003 PMC-Sierra - * Author: Manish Lachwani (lachwani@pmc-sierra.com) - * - * Board specific definititions for the PMC-Sierra Yosemite - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __TITAN_DEP_H__ -#define __TITAN_DEP_H__ - -#include /* for KSEG1ADDR() */ -#include /* for cpu_to_le32() */ - -#define TITAN_READ(ofs) \ - (*(volatile u32 *)(ocd_base+(ofs))) -#define TITAN_READ_16(ofs) \ - (*(volatile u16 *)(ocd_base+(ofs))) -#define TITAN_READ_8(ofs) \ - (*(volatile u8 *)(ocd_base+(ofs))) - -#define TITAN_WRITE(ofs, data) \ - do { *(volatile u32 *)(ocd_base+(ofs)) = (data); } while (0) -#define TITAN_WRITE_16(ofs, data) \ - do { *(volatile u16 *)(ocd_base+(ofs)) = (data); } while (0) -#define TITAN_WRITE_8(ofs, data) \ - do { *(volatile u8 *)(ocd_base+(ofs)) = (data); } while (0) - -/* - * PCI specific defines - */ -#define TITAN_PCI_0_CONFIG_ADDRESS 0x780 -#define TITAN_PCI_0_CONFIG_DATA 0x784 - -/* - * HT specific defines - */ -#define RM9000x2_HTLINK_REG 0xbb000644 -#define RM9000x2_BASE_ADDR 0xbb000000 - -#define OCD_BASE 0xfb000000UL -#define OCD_SIZE 0x3000UL - -extern unsigned long ocd_base; - -/* - * OCD Registers - */ -#define RM9000x2_OCD_LKB5 0x0128 /* Ethernet */ -#define RM9000x2_OCD_LKM5 0x012c - -#define RM9000x2_OCD_LKB7 0x0138 /* HT Region 0 */ -#define RM9000x2_OCD_LKM7 0x013c -#define RM9000x2_OCD_LKB8 0x0140 /* HT Region 1 */ -#define RM9000x2_OCD_LKM8 0x0144 - -#define RM9000x2_OCD_LKB9 0x0148 /* Local Bus */ -#define RM9000x2_OCD_LKM9 0x014c -#define RM9000x2_OCD_LKB10 0x0150 -#define RM9000x2_OCD_LKM10 0x0154 -#define RM9000x2_OCD_LKB11 0x0158 -#define RM9000x2_OCD_LKM11 0x015c -#define RM9000x2_OCD_LKB12 0x0160 -#define RM9000x2_OCD_LKM12 0x0164 - -#define RM9000x2_OCD_LKB13 0x0168 /* Scratch RAM */ -#define RM9000x2_OCD_LKM13 0x016c - -#define RM9000x2_OCD_LPD0 0x0200 /* Local Bus */ -#define RM9000x2_OCD_LPD1 0x0210 -#define RM9000x2_OCD_LPD2 0x0220 -#define RM9000x2_OCD_LPD3 0x0230 - -#define RM9000x2_OCD_HTDVID 0x0600 /* HT Device Header */ -#define RM9000x2_OCD_HTSC 0x0604 -#define RM9000x2_OCD_HTCCR 0x0608 -#define RM9000x2_OCD_HTBHL 0x060c -#define RM9000x2_OCD_HTBAR0 0x0610 -#define RM9000x2_OCD_HTBAR1 0x0614 -#define RM9000x2_OCD_HTBAR2 0x0618 -#define RM9000x2_OCD_HTBAR3 0x061c -#define RM9000x2_OCD_HTBAR4 0x0620 -#define RM9000x2_OCD_HTBAR5 0x0624 -#define RM9000x2_OCD_HTCBCPT 0x0628 -#define RM9000x2_OCD_HTSDVID 0x062c -#define RM9000x2_OCD_HTXRA 0x0630 -#define RM9000x2_OCD_HTCAP1 0x0634 -#define RM9000x2_OCD_HTIL 0x063c - -#define RM9000x2_OCD_HTLCC 0x0640 /* HT Capability Block */ -#define RM9000x2_OCD_HTLINK 0x0644 -#define RM9000x2_OCD_HTFQREV 0x0648 - -#define RM9000x2_OCD_HTERCTL 0x0668 /* HT Controller */ -#define RM9000x2_OCD_HTRXDB 0x066c -#define RM9000x2_OCD_HTIMPED 0x0670 -#define RM9000x2_OCD_HTSWIMP 0x0674 -#define RM9000x2_OCD_HTCAL 0x0678 - -#define RM9000x2_OCD_HTBAA30 0x0680 -#define RM9000x2_OCD_HTBAA54 0x0684 -#define RM9000x2_OCD_HTMASK0 0x0688 -#define RM9000x2_OCD_HTMASK1 0x068c -#define RM9000x2_OCD_HTMASK2 0x0690 -#define RM9000x2_OCD_HTMASK3 0x0694 -#define RM9000x2_OCD_HTMASK4 0x0698 -#define RM9000x2_OCD_HTMASK5 0x069c - -#define RM9000x2_OCD_HTIFCTL 0x06a0 -#define RM9000x2_OCD_HTPLL 0x06a4 - -#define RM9000x2_OCD_HTSRI 0x06b0 -#define RM9000x2_OCD_HTRXNUM 0x06b4 -#define RM9000x2_OCD_HTTXNUM 0x06b8 - -#define RM9000x2_OCD_HTTXCNT 0x06c8 - -#define RM9000x2_OCD_HTERROR 0x06d8 -#define RM9000x2_OCD_HTRCRCE 0x06dc -#define RM9000x2_OCD_HTEOI 0x06e0 - -#define RM9000x2_OCD_CRCR 0x06f0 - -#define RM9000x2_OCD_HTCFGA 0x06f8 -#define RM9000x2_OCD_HTCFGD 0x06fc - -#define RM9000x2_OCD_INTMSG 0x0a00 - -#define RM9000x2_OCD_INTPIN0 0x0a40 -#define RM9000x2_OCD_INTPIN1 0x0a44 -#define RM9000x2_OCD_INTPIN2 0x0a48 -#define RM9000x2_OCD_INTPIN3 0x0a4c -#define RM9000x2_OCD_INTPIN4 0x0a50 -#define RM9000x2_OCD_INTPIN5 0x0a54 -#define RM9000x2_OCD_INTPIN6 0x0a58 -#define RM9000x2_OCD_INTPIN7 0x0a5c -#define RM9000x2_OCD_SEM 0x0a60 -#define RM9000x2_OCD_SEMSET 0x0a64 -#define RM9000x2_OCD_SEMCLR 0x0a68 - -#define RM9000x2_OCD_TKT 0x0a70 -#define RM9000x2_OCD_TKTINC 0x0a74 - -#define RM9000x2_OCD_NMICONFIG 0x0ac0 /* Interrupts */ -#define RM9000x2_OCD_INTP0PRI 0x1a80 -#define RM9000x2_OCD_INTP1PRI 0x1a80 -#define RM9000x2_OCD_INTP0STATUS0 0x1b00 -#define RM9000x2_OCD_INTP0MASK0 0x1b04 -#define RM9000x2_OCD_INTP0SET0 0x1b08 -#define RM9000x2_OCD_INTP0CLEAR0 0x1b0c -#define RM9000x2_OCD_INTP0STATUS1 0x1b10 -#define RM9000x2_OCD_INTP0MASK1 0x1b14 -#define RM9000x2_OCD_INTP0SET1 0x1b18 -#define RM9000x2_OCD_INTP0CLEAR1 0x1b1c -#define RM9000x2_OCD_INTP0STATUS2 0x1b20 -#define RM9000x2_OCD_INTP0MASK2 0x1b24 -#define RM9000x2_OCD_INTP0SET2 0x1b28 -#define RM9000x2_OCD_INTP0CLEAR2 0x1b2c -#define RM9000x2_OCD_INTP0STATUS3 0x1b30 -#define RM9000x2_OCD_INTP0MASK3 0x1b34 -#define RM9000x2_OCD_INTP0SET3 0x1b38 -#define RM9000x2_OCD_INTP0CLEAR3 0x1b3c -#define RM9000x2_OCD_INTP0STATUS4 0x1b40 -#define RM9000x2_OCD_INTP0MASK4 0x1b44 -#define RM9000x2_OCD_INTP0SET4 0x1b48 -#define RM9000x2_OCD_INTP0CLEAR4 0x1b4c -#define RM9000x2_OCD_INTP0STATUS5 0x1b50 -#define RM9000x2_OCD_INTP0MASK5 0x1b54 -#define RM9000x2_OCD_INTP0SET5 0x1b58 -#define RM9000x2_OCD_INTP0CLEAR5 0x1b5c -#define RM9000x2_OCD_INTP0STATUS6 0x1b60 -#define RM9000x2_OCD_INTP0MASK6 0x1b64 -#define RM9000x2_OCD_INTP0SET6 0x1b68 -#define RM9000x2_OCD_INTP0CLEAR6 0x1b6c -#define RM9000x2_OCD_INTP0STATUS7 0x1b70 -#define RM9000x2_OCD_INTP0MASK7 0x1b74 -#define RM9000x2_OCD_INTP0SET7 0x1b78 -#define RM9000x2_OCD_INTP0CLEAR7 0x1b7c -#define RM9000x2_OCD_INTP1STATUS0 0x2b00 -#define RM9000x2_OCD_INTP1MASK0 0x2b04 -#define RM9000x2_OCD_INTP1SET0 0x2b08 -#define RM9000x2_OCD_INTP1CLEAR0 0x2b0c -#define RM9000x2_OCD_INTP1STATUS1 0x2b10 -#define RM9000x2_OCD_INTP1MASK1 0x2b14 -#define RM9000x2_OCD_INTP1SET1 0x2b18 -#define RM9000x2_OCD_INTP1CLEAR1 0x2b1c -#define RM9000x2_OCD_INTP1STATUS2 0x2b20 -#define RM9000x2_OCD_INTP1MASK2 0x2b24 -#define RM9000x2_OCD_INTP1SET2 0x2b28 -#define RM9000x2_OCD_INTP1CLEAR2 0x2b2c -#define RM9000x2_OCD_INTP1STATUS3 0x2b30 -#define RM9000x2_OCD_INTP1MASK3 0x2b34 -#define RM9000x2_OCD_INTP1SET3 0x2b38 -#define RM9000x2_OCD_INTP1CLEAR3 0x2b3c -#define RM9000x2_OCD_INTP1STATUS4 0x2b40 -#define RM9000x2_OCD_INTP1MASK4 0x2b44 -#define RM9000x2_OCD_INTP1SET4 0x2b48 -#define RM9000x2_OCD_INTP1CLEAR4 0x2b4c -#define RM9000x2_OCD_INTP1STATUS5 0x2b50 -#define RM9000x2_OCD_INTP1MASK5 0x2b54 -#define RM9000x2_OCD_INTP1SET5 0x2b58 -#define RM9000x2_OCD_INTP1CLEAR5 0x2b5c -#define RM9000x2_OCD_INTP1STATUS6 0x2b60 -#define RM9000x2_OCD_INTP1MASK6 0x2b64 -#define RM9000x2_OCD_INTP1SET6 0x2b68 -#define RM9000x2_OCD_INTP1CLEAR6 0x2b6c -#define RM9000x2_OCD_INTP1STATUS7 0x2b70 -#define RM9000x2_OCD_INTP1MASK7 0x2b74 -#define RM9000x2_OCD_INTP1SET7 0x2b78 -#define RM9000x2_OCD_INTP1CLEAR7 0x2b7c - -#define OCD_READ(reg) (*(volatile unsigned int *)(ocd_base + (reg))) -#define OCD_WRITE(reg, val) \ - do { *(volatile unsigned int *)(ocd_base + (reg)) = (val); } while (0) - -/* - * Hypertransport specific macros - */ -#define RM9K_WRITE(ofs, data) *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs) = data -#define RM9K_WRITE_8(ofs, data) *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs) = data -#define RM9K_WRITE_16(ofs, data) *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs) = data - -#define RM9K_READ(ofs, val) *(val) = *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs) -#define RM9K_READ_8(ofs, val) *(val) = *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs) -#define RM9K_READ_16(ofs, val) *(val) = *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs) - -#endif diff --git a/include/asm-mips/tlb.h b/include/asm-mips/tlb.h deleted file mode 100644 index 80d9dfcf1e88..000000000000 --- a/include/asm-mips/tlb.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef __ASM_TLB_H -#define __ASM_TLB_H - -/* - * MIPS doesn't need any special per-pte or per-vma handling, except - * we need to flush cache for area to be unmapped. - */ -#define tlb_start_vma(tlb, vma) \ - do { \ - if (!tlb->fullmm) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end); \ - } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) - -/* - * .. because we flush the whole mm when it fills up. - */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#include - -#endif /* __ASM_TLB_H */ diff --git a/include/asm-mips/tlbdebug.h b/include/asm-mips/tlbdebug.h deleted file mode 100644 index bb8f5c29c3d9..000000000000 --- a/include/asm-mips/tlbdebug.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 by Ralf Baechle - */ -#ifndef __ASM_TLBDEBUG_H -#define __ASM_TLBDEBUG_H - -/* - * TLB debugging functions: - */ -extern void dump_tlb_all(void); - -#endif /* __ASM_TLBDEBUG_H */ diff --git a/include/asm-mips/tlbflush.h b/include/asm-mips/tlbflush.h deleted file mode 100644 index 86b21de12e91..000000000000 --- a/include/asm-mips/tlbflush.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef __ASM_TLBFLUSH_H -#define __ASM_TLBFLUSH_H - -#include - -/* - * TLB flushing: - * - * - flush_tlb_all() flushes all processes TLB entries - * - flush_tlb_mm(mm) flushes the specified mm context TLB entries - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_range(vma, start, end) flushes a range of pages - * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages - */ -extern void local_flush_tlb_all(void); -extern void local_flush_tlb_mm(struct mm_struct *mm); -extern void local_flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end); -extern void local_flush_tlb_kernel_range(unsigned long start, - unsigned long end); -extern void local_flush_tlb_page(struct vm_area_struct *vma, - unsigned long page); -extern void local_flush_tlb_one(unsigned long vaddr); - -#ifdef CONFIG_SMP - -extern void flush_tlb_all(void); -extern void flush_tlb_mm(struct mm_struct *); -extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long, - unsigned long); -extern void flush_tlb_kernel_range(unsigned long, unsigned long); -extern void flush_tlb_page(struct vm_area_struct *, unsigned long); -extern void flush_tlb_one(unsigned long vaddr); - -#else /* CONFIG_SMP */ - -#define flush_tlb_all() local_flush_tlb_all() -#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) -#define flush_tlb_range(vma, vmaddr, end) local_flush_tlb_range(vma, vmaddr, end) -#define flush_tlb_kernel_range(vmaddr,end) \ - local_flush_tlb_kernel_range(vmaddr, end) -#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) -#define flush_tlb_one(vaddr) local_flush_tlb_one(vaddr) - -#endif /* CONFIG_SMP */ - -#endif /* __ASM_TLBFLUSH_H */ diff --git a/include/asm-mips/topology.h b/include/asm-mips/topology.h deleted file mode 100644 index 259145e07e97..000000000000 --- a/include/asm-mips/topology.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 by Ralf Baechle - */ -#ifndef __ASM_TOPOLOGY_H -#define __ASM_TOPOLOGY_H - -#include - -#ifdef CONFIG_SMP -#define smt_capable() (smp_num_siblings > 1) -#endif - -#endif /* __ASM_TOPOLOGY_H */ diff --git a/include/asm-mips/traps.h b/include/asm-mips/traps.h deleted file mode 100644 index 90ff2f497c50..000000000000 --- a/include/asm-mips/traps.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Trap handling definitions. - * - * Copyright (C) 2002, 2003 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_TRAPS_H -#define _ASM_TRAPS_H - -/* - * Possible status responses for a board_be_handler backend. - */ -#define MIPS_BE_DISCARD 0 /* return with no action */ -#define MIPS_BE_FIXUP 1 /* return to the fixup code */ -#define MIPS_BE_FATAL 2 /* treat as an unrecoverable error */ - -extern void (*board_be_init)(void); -extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup); - -extern void (*board_nmi_handler_setup)(void); -extern void (*board_ejtag_handler_setup)(void); -extern void (*board_bind_eic_interrupt)(int irq, int regset); - -#endif /* _ASM_TRAPS_H */ diff --git a/include/asm-mips/txx9/boards.h b/include/asm-mips/txx9/boards.h deleted file mode 100644 index cbe9476d963e..000000000000 --- a/include/asm-mips/txx9/boards.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifdef CONFIG_TOSHIBA_JMR3927 -BOARD_VEC(jmr3927_vec) -#endif -#ifdef CONFIG_TOSHIBA_RBTX4927 -BOARD_VEC(rbtx4927_vec) -BOARD_VEC(rbtx4937_vec) -#endif -#ifdef CONFIG_TOSHIBA_RBTX4938 -BOARD_VEC(rbtx4938_vec) -#endif -#ifdef CONFIG_TOSHIBA_RBTX4939 -BOARD_VEC(rbtx4939_vec) -#endif diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h deleted file mode 100644 index 4316a3e57678..000000000000 --- a/include/asm-mips/txx9/generic.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * linux/include/asm-mips/txx9/generic.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_TXX9_GENERIC_H -#define __ASM_TXX9_GENERIC_H - -#include -#include /* for struct resource */ - -extern struct resource txx9_ce_res[]; -#define TXX9_CE(n) (unsigned long)(txx9_ce_res[(n)].start) -extern unsigned int txx9_pcode; -extern char txx9_pcode_str[8]; -void txx9_reg_res_init(unsigned int pcode, unsigned long base, - unsigned long size); - -extern unsigned int txx9_master_clock; -extern unsigned int txx9_cpu_clock; -extern unsigned int txx9_gbus_clock; -#define TXX9_IMCLK (txx9_gbus_clock / 2) - -extern int txx9_ccfg_toeon; -struct uart_port; -int early_serial_txx9_setup(struct uart_port *port); - -struct pci_dev; -struct txx9_board_vec { - const char *system; - void (*prom_init)(void); - void (*mem_setup)(void); - void (*irq_setup)(void); - void (*time_init)(void); - void (*arch_init)(void); - void (*device_init)(void); -#ifdef CONFIG_PCI - int (*pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); -#endif -}; -extern struct txx9_board_vec *txx9_board_vec; -extern int (*txx9_irq_dispatch)(int pending); -char *prom_getcmdline(void); -const char *prom_getenv(const char *name); -void txx9_wdt_init(unsigned long base); -void txx9_wdt_now(unsigned long base); -void txx9_spi_init(int busid, unsigned long base, int irq); -void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr); -void txx9_sio_init(unsigned long baseaddr, int irq, - unsigned int line, unsigned int sclk, int nocts); -void prom_putchar(char c); -#ifdef CONFIG_EARLY_PRINTK -extern void (*txx9_prom_putchar)(char c); -void txx9_sio_putchar_init(unsigned long baseaddr); -#else -static inline void txx9_sio_putchar_init(unsigned long baseaddr) -{ -} -#endif - -struct physmap_flash_data; -void txx9_physmap_flash_init(int no, unsigned long addr, unsigned long size, - const struct physmap_flash_data *pdata); - -/* 8 bit version of __fls(): find first bit set (returns 0..7) */ -static inline unsigned int __fls8(unsigned char x) -{ - int r = 7; - - if (!(x & 0xf0)) { - r -= 4; - x <<= 4; - } - if (!(x & 0xc0)) { - r -= 2; - x <<= 2; - } - if (!(x & 0x80)) - r -= 1; - return r; -} - -void txx9_iocled_init(unsigned long baseaddr, - int basenum, unsigned int num, int lowactive, - const char *color, char **deftriggers); - -#endif /* __ASM_TXX9_GENERIC_H */ diff --git a/include/asm-mips/txx9/jmr3927.h b/include/asm-mips/txx9/jmr3927.h deleted file mode 100644 index a409c446bf18..000000000000 --- a/include/asm-mips/txx9/jmr3927.h +++ /dev/null @@ -1,180 +0,0 @@ -/* - * Defines for the TJSYS JMR-TX3927 - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2001 Toshiba Corporation - */ -#ifndef __ASM_TXX9_JMR3927_H -#define __ASM_TXX9_JMR3927_H - -#include -#include -#include -#include - -/* CS */ -#define JMR3927_ROMCE0 0x1fc00000 /* 4M */ -#define JMR3927_ROMCE1 0x1e000000 /* 4M */ -#define JMR3927_ROMCE2 0x14000000 /* 16M */ -#define JMR3927_ROMCE3 0x10000000 /* 64M */ -#define JMR3927_ROMCE5 0x1d000000 /* 4M */ -#define JMR3927_SDCS0 0x00000000 /* 32M */ -#define JMR3927_SDCS1 0x02000000 /* 32M */ -/* PCI Direct Mappings */ - -#define JMR3927_PCIMEM 0x08000000 -#define JMR3927_PCIMEM_SIZE 0x08000000 /* 128M */ -#define JMR3927_PCIIO 0x15000000 -#define JMR3927_PCIIO_SIZE 0x01000000 /* 16M */ - -#define JMR3927_SDRAM_SIZE 0x02000000 /* 32M */ -#define JMR3927_PORT_BASE KSEG1 - -/* Address map (virtual address) */ -#define JMR3927_ROM0_BASE (KSEG1 + JMR3927_ROMCE0) -#define JMR3927_ROM1_BASE (KSEG1 + JMR3927_ROMCE1) -#define JMR3927_IOC_BASE (KSEG1 + JMR3927_ROMCE2) -#define JMR3927_PCIMEM_BASE (KSEG1 + JMR3927_PCIMEM) -#define JMR3927_PCIIO_BASE (KSEG1 + JMR3927_PCIIO) - -#define JMR3927_IOC_REV_ADDR (JMR3927_IOC_BASE + 0x00000000) -#define JMR3927_IOC_NVRAMB_ADDR (JMR3927_IOC_BASE + 0x00010000) -#define JMR3927_IOC_LED_ADDR (JMR3927_IOC_BASE + 0x00020000) -#define JMR3927_IOC_DIPSW_ADDR (JMR3927_IOC_BASE + 0x00030000) -#define JMR3927_IOC_BREV_ADDR (JMR3927_IOC_BASE + 0x00040000) -#define JMR3927_IOC_DTR_ADDR (JMR3927_IOC_BASE + 0x00050000) -#define JMR3927_IOC_INTS1_ADDR (JMR3927_IOC_BASE + 0x00080000) -#define JMR3927_IOC_INTS2_ADDR (JMR3927_IOC_BASE + 0x00090000) -#define JMR3927_IOC_INTM_ADDR (JMR3927_IOC_BASE + 0x000a0000) -#define JMR3927_IOC_INTP_ADDR (JMR3927_IOC_BASE + 0x000b0000) -#define JMR3927_IOC_RESET_ADDR (JMR3927_IOC_BASE + 0x000f0000) - -/* Flash ROM */ -#define JMR3927_FLASH_BASE (JMR3927_ROM0_BASE) -#define JMR3927_FLASH_SIZE 0x00400000 - -/* bits for IOC_REV/IOC_BREV (high byte) */ -#define JMR3927_IDT_MASK 0xfc -#define JMR3927_REV_MASK 0x03 -#define JMR3927_IOC_IDT 0xe0 - -/* bits for IOC_INTS1/IOC_INTS2/IOC_INTM/IOC_INTP (high byte) */ -#define JMR3927_IOC_INTB_PCIA 0 -#define JMR3927_IOC_INTB_PCIB 1 -#define JMR3927_IOC_INTB_PCIC 2 -#define JMR3927_IOC_INTB_PCID 3 -#define JMR3927_IOC_INTB_MODEM 4 -#define JMR3927_IOC_INTB_INT6 5 -#define JMR3927_IOC_INTB_INT7 6 -#define JMR3927_IOC_INTB_SOFT 7 -#define JMR3927_IOC_INTF_PCIA (1 << JMR3927_IOC_INTF_PCIA) -#define JMR3927_IOC_INTF_PCIB (1 << JMR3927_IOC_INTB_PCIB) -#define JMR3927_IOC_INTF_PCIC (1 << JMR3927_IOC_INTB_PCIC) -#define JMR3927_IOC_INTF_PCID (1 << JMR3927_IOC_INTB_PCID) -#define JMR3927_IOC_INTF_MODEM (1 << JMR3927_IOC_INTB_MODEM) -#define JMR3927_IOC_INTF_INT6 (1 << JMR3927_IOC_INTB_INT6) -#define JMR3927_IOC_INTF_INT7 (1 << JMR3927_IOC_INTB_INT7) -#define JMR3927_IOC_INTF_SOFT (1 << JMR3927_IOC_INTB_SOFT) - -/* bits for IOC_RESET (high byte) */ -#define JMR3927_IOC_RESET_CPU 1 -#define JMR3927_IOC_RESET_PCI 2 - -#if defined(__BIG_ENDIAN) -#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)(a)) = (d)) -#define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)(a)) -#elif defined(__LITTLE_ENDIAN) -#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)((a)^1)) = (d)) -#define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)((a)^1)) -#else -#error "No Endian" -#endif - -/* LED macro */ -#define jmr3927_led_set(n/*0-16*/) jmr3927_ioc_reg_out(~(n), JMR3927_IOC_LED_ADDR) - -#define jmr3927_led_and_set(n/*0-16*/) jmr3927_ioc_reg_out((~(n)) & jmr3927_ioc_reg_in(JMR3927_IOC_LED_ADDR), JMR3927_IOC_LED_ADDR) - -/* DIPSW4 macro */ -#define jmr3927_dipsw1() (gpio_get_value(11) == 0) -#define jmr3927_dipsw2() (gpio_get_value(10) == 0) -#define jmr3927_dipsw3() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 2) == 0) -#define jmr3927_dipsw4() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 1) == 0) - -/* - * IRQ mappings - */ - -/* These are the virtual IRQ numbers, we divide all IRQ's into - * 'spaces', the 'space' determines where and how to enable/disable - * that particular IRQ on an JMR machine. Add new 'spaces' as new - * IRQ hardware is supported. - */ -#define JMR3927_NR_IRQ_IRC 16 /* On-Chip IRC */ -#define JMR3927_NR_IRQ_IOC 8 /* PCI/MODEM/INT[6:7] */ - -#define JMR3927_IRQ_IRC TXX9_IRQ_BASE -#define JMR3927_IRQ_IOC (JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC) -#define JMR3927_IRQ_END (JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC) - -#define JMR3927_IRQ_IRC_INT0 (JMR3927_IRQ_IRC + TX3927_IR_INT0) -#define JMR3927_IRQ_IRC_INT1 (JMR3927_IRQ_IRC + TX3927_IR_INT1) -#define JMR3927_IRQ_IRC_INT2 (JMR3927_IRQ_IRC + TX3927_IR_INT2) -#define JMR3927_IRQ_IRC_INT3 (JMR3927_IRQ_IRC + TX3927_IR_INT3) -#define JMR3927_IRQ_IRC_INT4 (JMR3927_IRQ_IRC + TX3927_IR_INT4) -#define JMR3927_IRQ_IRC_INT5 (JMR3927_IRQ_IRC + TX3927_IR_INT5) -#define JMR3927_IRQ_IRC_SIO0 (JMR3927_IRQ_IRC + TX3927_IR_SIO0) -#define JMR3927_IRQ_IRC_SIO1 (JMR3927_IRQ_IRC + TX3927_IR_SIO1) -#define JMR3927_IRQ_IRC_SIO(ch) (JMR3927_IRQ_IRC + TX3927_IR_SIO(ch)) -#define JMR3927_IRQ_IRC_DMA (JMR3927_IRQ_IRC + TX3927_IR_DMA) -#define JMR3927_IRQ_IRC_PIO (JMR3927_IRQ_IRC + TX3927_IR_PIO) -#define JMR3927_IRQ_IRC_PCI (JMR3927_IRQ_IRC + TX3927_IR_PCI) -#define JMR3927_IRQ_IRC_TMR(ch) (JMR3927_IRQ_IRC + TX3927_IR_TMR(ch)) -#define JMR3927_IRQ_IOC_PCIA (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA) -#define JMR3927_IRQ_IOC_PCIB (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB) -#define JMR3927_IRQ_IOC_PCIC (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC) -#define JMR3927_IRQ_IOC_PCID (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCID) -#define JMR3927_IRQ_IOC_MODEM (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_MODEM) -#define JMR3927_IRQ_IOC_INT6 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT6) -#define JMR3927_IRQ_IOC_INT7 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT7) -#define JMR3927_IRQ_IOC_SOFT (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_SOFT) - -/* IOC (PCI, MODEM) */ -#define JMR3927_IRQ_IOCINT JMR3927_IRQ_IRC_INT1 -/* TC35815 100M Ether (JMR-TX3912:JPW4:2-3 Short) */ -#define JMR3927_IRQ_ETHER0 JMR3927_IRQ_IRC_INT3 - -/* Clocks */ -#define JMR3927_CORECLK 132710400 /* 132.7MHz */ - -/* - * TX3927 Pin Configuration: - * - * PCFG bits Avail Dead - * SELSIO[1:0]:11 RXD[1:0], TXD[1:0] PIO[6:3] - * SELSIOC[0]:1 CTS[0], RTS[0] INT[5:4] - * SELSIOC[1]:0,SELDSF:0, GSDAO[0],GPCST[3] CTS[1], RTS[1],DSF, - * GDBGE* PIO[2:1] - * SELDMA[2]:1 DMAREQ[2],DMAACK[2] PIO[13:12] - * SELTMR[2:0]:000 TIMER[1:0] - * SELCS:0,SELDMA[1]:0 PIO[11;10] SDCS_CE[7:6], - * DMAREQ[1],DMAACK[1] - * SELDMA[0]:1 DMAREQ[0],DMAACK[0] PIO[9:8] - * SELDMA[3]:1 DMAREQ[3],DMAACK[3] PIO[15:14] - * SELDONE:1 DMADONE PIO[7] - * - * Usable pins are: - * RXD[1;0],TXD[1:0],CTS[0],RTS[0], - * DMAREQ[0,2,3],DMAACK[0,2,3],DMADONE,PIO[0,10,11] - * INT[3:0] - */ - -void jmr3927_prom_init(void); -void jmr3927_irq_setup(void); -struct pci_dev; -int jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); - -#endif /* __ASM_TXX9_JMR3927_H */ diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h deleted file mode 100644 index 3d32529060aa..000000000000 --- a/include/asm-mips/txx9/pci.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_TXX9_PCI_H -#define __ASM_TXX9_PCI_H - -#include - -extern struct pci_controller txx9_primary_pcic; -struct pci_controller * -txx9_alloc_pci_controller(struct pci_controller *pcic, - unsigned long mem_base, unsigned long mem_size, - unsigned long io_base, unsigned long io_size); - -int txx9_pci66_check(struct pci_controller *hose, int top_bus, - int current_bus); -extern int txx9_pci_mem_high __initdata; - -extern int txx9_pci_option; -#define TXX9_PCI_OPT_PICMG 0x0002 -#define TXX9_PCI_OPT_CLK_33 0x0008 -#define TXX9_PCI_OPT_CLK_66 0x0010 -#define TXX9_PCI_OPT_CLK_MASK \ - (TXX9_PCI_OPT_CLK_33 | TXX9_PCI_OPT_CLK_66) -#define TXX9_PCI_OPT_CLK_AUTO TXX9_PCI_OPT_CLK_MASK - -enum txx9_pci_err_action { - TXX9_PCI_ERR_REPORT, - TXX9_PCI_ERR_IGNORE, - TXX9_PCI_ERR_PANIC, -}; -extern enum txx9_pci_err_action txx9_pci_err_action; - -extern char * (*txx9_board_pcibios_setup)(char *str); -char *txx9_pcibios_setup(char *str); - -#endif /* __ASM_TXX9_PCI_H */ diff --git a/include/asm-mips/txx9/rbtx4927.h b/include/asm-mips/txx9/rbtx4927.h deleted file mode 100644 index b2adab3d1acc..000000000000 --- a/include/asm-mips/txx9/rbtx4927.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_TXX9_RBTX4927_H -#define __ASM_TXX9_RBTX4927_H - -#include - -#define RBTX4927_PCIMEM 0x08000000 -#define RBTX4927_PCIMEM_SIZE 0x08000000 -#define RBTX4927_PCIIO 0x16000000 -#define RBTX4927_PCIIO_SIZE 0x01000000 - -#define RBTX4927_LED_ADDR (IO_BASE + TXX9_CE(2) + 0x00001000) -#define RBTX4927_IMASK_ADDR (IO_BASE + TXX9_CE(2) + 0x00002000) -#define RBTX4927_IMSTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x00002006) -#define RBTX4927_SOFTINT_ADDR (IO_BASE + TXX9_CE(2) + 0x00003000) -#define RBTX4927_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f000) -#define RBTX4927_SOFTRESETLOCK_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f002) -#define RBTX4927_PCIRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f006) -#define RBTX4927_BRAMRTC_BASE (IO_BASE + TXX9_CE(2) + 0x00010000) -#define RBTX4927_ETHER_BASE (IO_BASE + TXX9_CE(2) + 0x00020000) - -/* Ethernet port address */ -#define RBTX4927_ETHER_ADDR (RBTX4927_ETHER_BASE + 0x280) - -#define rbtx4927_imask_addr ((__u8 __iomem *)RBTX4927_IMASK_ADDR) -#define rbtx4927_imstat_addr ((__u8 __iomem *)RBTX4927_IMSTAT_ADDR) -#define rbtx4927_softint_addr ((__u8 __iomem *)RBTX4927_SOFTINT_ADDR) -#define rbtx4927_softreset_addr ((__u8 __iomem *)RBTX4927_SOFTRESET_ADDR) -#define rbtx4927_softresetlock_addr \ - ((__u8 __iomem *)RBTX4927_SOFTRESETLOCK_ADDR) -#define rbtx4927_pcireset_addr ((__u8 __iomem *)RBTX4927_PCIRESET_ADDR) - -/* bits for ISTAT/IMASK/IMSTAT */ -#define RBTX4927_INTB_PCID 0 -#define RBTX4927_INTB_PCIC 1 -#define RBTX4927_INTB_PCIB 2 -#define RBTX4927_INTB_PCIA 3 -#define RBTX4927_INTF_PCID (1 << RBTX4927_INTB_PCID) -#define RBTX4927_INTF_PCIC (1 << RBTX4927_INTB_PCIC) -#define RBTX4927_INTF_PCIB (1 << RBTX4927_INTB_PCIB) -#define RBTX4927_INTF_PCIA (1 << RBTX4927_INTB_PCIA) - -#define RBTX4927_NR_IRQ_IOC 8 /* IOC */ - -#define RBTX4927_IRQ_IOC (TXX9_IRQ_BASE + TX4927_NUM_IR) -#define RBTX4927_IRQ_IOC_PCID (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCID) -#define RBTX4927_IRQ_IOC_PCIC (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIC) -#define RBTX4927_IRQ_IOC_PCIB (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIB) -#define RBTX4927_IRQ_IOC_PCIA (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIA) - -#define RBTX4927_IRQ_IOCINT (TXX9_IRQ_BASE + TX4927_IR_INT(1)) - -#ifdef CONFIG_PCI -#define RBTX4927_ISA_IO_OFFSET RBTX4927_PCIIO -#else -#define RBTX4927_ISA_IO_OFFSET 0 -#endif - -#define RBTX4927_RTL_8019_BASE (RBTX4927_ETHER_ADDR - mips_io_port_base) -#define RBTX4927_RTL_8019_IRQ (TXX9_IRQ_BASE + TX4927_IR_INT(3)) - -void rbtx4927_prom_init(void); -void rbtx4927_irq_setup(void); -struct pci_dev; -int rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); - -#endif /* __ASM_TXX9_RBTX4927_H */ diff --git a/include/asm-mips/txx9/rbtx4938.h b/include/asm-mips/txx9/rbtx4938.h deleted file mode 100644 index 9f0441a28126..000000000000 --- a/include/asm-mips/txx9/rbtx4938.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Definitions for TX4937/TX4938 - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#ifndef __ASM_TXX9_RBTX4938_H -#define __ASM_TXX9_RBTX4938_H - -#include -#include -#include - -/* Address map */ -#define RBTX4938_FPGA_REG_ADDR (IO_BASE + TXX9_CE(2) + 0x00000000) -#define RBTX4938_FPGA_REV_ADDR (IO_BASE + TXX9_CE(2) + 0x00000002) -#define RBTX4938_CONFIG1_ADDR (IO_BASE + TXX9_CE(2) + 0x00000004) -#define RBTX4938_CONFIG2_ADDR (IO_BASE + TXX9_CE(2) + 0x00000006) -#define RBTX4938_CONFIG3_ADDR (IO_BASE + TXX9_CE(2) + 0x00000008) -#define RBTX4938_LED_ADDR (IO_BASE + TXX9_CE(2) + 0x00001000) -#define RBTX4938_DIPSW_ADDR (IO_BASE + TXX9_CE(2) + 0x00001002) -#define RBTX4938_BDIPSW_ADDR (IO_BASE + TXX9_CE(2) + 0x00001004) -#define RBTX4938_IMASK_ADDR (IO_BASE + TXX9_CE(2) + 0x00002000) -#define RBTX4938_IMASK2_ADDR (IO_BASE + TXX9_CE(2) + 0x00002002) -#define RBTX4938_INTPOL_ADDR (IO_BASE + TXX9_CE(2) + 0x00002004) -#define RBTX4938_ISTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x00002006) -#define RBTX4938_ISTAT2_ADDR (IO_BASE + TXX9_CE(2) + 0x00002008) -#define RBTX4938_IMSTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x0000200a) -#define RBTX4938_IMSTAT2_ADDR (IO_BASE + TXX9_CE(2) + 0x0000200c) -#define RBTX4938_SOFTINT_ADDR (IO_BASE + TXX9_CE(2) + 0x00003000) -#define RBTX4938_PIOSEL_ADDR (IO_BASE + TXX9_CE(2) + 0x00005000) -#define RBTX4938_SPICS_ADDR (IO_BASE + TXX9_CE(2) + 0x00005002) -#define RBTX4938_SFPWR_ADDR (IO_BASE + TXX9_CE(2) + 0x00005008) -#define RBTX4938_SFVOL_ADDR (IO_BASE + TXX9_CE(2) + 0x0000500a) -#define RBTX4938_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007000) -#define RBTX4938_SOFTRESETLOCK_ADDR (IO_BASE + TXX9_CE(2) + 0x00007002) -#define RBTX4938_PCIRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007004) -#define RBTX4938_ETHER_BASE (IO_BASE + TXX9_CE(2) + 0x00020000) - -/* Ethernet port address (Jumperless Mode (W12:Open)) */ -#define RBTX4938_ETHER_ADDR (RBTX4938_ETHER_BASE + 0x280) - -/* bits for ISTAT/IMASK/IMSTAT */ -#define RBTX4938_INTB_PCID 0 -#define RBTX4938_INTB_PCIC 1 -#define RBTX4938_INTB_PCIB 2 -#define RBTX4938_INTB_PCIA 3 -#define RBTX4938_INTB_RTC 4 -#define RBTX4938_INTB_ATA 5 -#define RBTX4938_INTB_MODEM 6 -#define RBTX4938_INTB_SWINT 7 -#define RBTX4938_INTF_PCID (1 << RBTX4938_INTB_PCID) -#define RBTX4938_INTF_PCIC (1 << RBTX4938_INTB_PCIC) -#define RBTX4938_INTF_PCIB (1 << RBTX4938_INTB_PCIB) -#define RBTX4938_INTF_PCIA (1 << RBTX4938_INTB_PCIA) -#define RBTX4938_INTF_RTC (1 << RBTX4938_INTB_RTC) -#define RBTX4938_INTF_ATA (1 << RBTX4938_INTB_ATA) -#define RBTX4938_INTF_MODEM (1 << RBTX4938_INTB_MODEM) -#define RBTX4938_INTF_SWINT (1 << RBTX4938_INTB_SWINT) - -#define rbtx4938_fpga_rev_addr ((__u8 __iomem *)RBTX4938_FPGA_REV_ADDR) -#define rbtx4938_led_addr ((__u8 __iomem *)RBTX4938_LED_ADDR) -#define rbtx4938_dipsw_addr ((__u8 __iomem *)RBTX4938_DIPSW_ADDR) -#define rbtx4938_bdipsw_addr ((__u8 __iomem *)RBTX4938_BDIPSW_ADDR) -#define rbtx4938_imask_addr ((__u8 __iomem *)RBTX4938_IMASK_ADDR) -#define rbtx4938_imask2_addr ((__u8 __iomem *)RBTX4938_IMASK2_ADDR) -#define rbtx4938_intpol_addr ((__u8 __iomem *)RBTX4938_INTPOL_ADDR) -#define rbtx4938_istat_addr ((__u8 __iomem *)RBTX4938_ISTAT_ADDR) -#define rbtx4938_istat2_addr ((__u8 __iomem *)RBTX4938_ISTAT2_ADDR) -#define rbtx4938_imstat_addr ((__u8 __iomem *)RBTX4938_IMSTAT_ADDR) -#define rbtx4938_imstat2_addr ((__u8 __iomem *)RBTX4938_IMSTAT2_ADDR) -#define rbtx4938_softint_addr ((__u8 __iomem *)RBTX4938_SOFTINT_ADDR) -#define rbtx4938_piosel_addr ((__u8 __iomem *)RBTX4938_PIOSEL_ADDR) -#define rbtx4938_spics_addr ((__u8 __iomem *)RBTX4938_SPICS_ADDR) -#define rbtx4938_sfpwr_addr ((__u8 __iomem *)RBTX4938_SFPWR_ADDR) -#define rbtx4938_sfvol_addr ((__u8 __iomem *)RBTX4938_SFVOL_ADDR) -#define rbtx4938_softreset_addr ((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR) -#define rbtx4938_softresetlock_addr \ - ((__u8 __iomem *)RBTX4938_SOFTRESETLOCK_ADDR) -#define rbtx4938_pcireset_addr ((__u8 __iomem *)RBTX4938_PCIRESET_ADDR) - -/* - * IRQ mappings - */ - -#define RBTX4938_SOFT_INT0 0 /* not used */ -#define RBTX4938_SOFT_INT1 1 /* not used */ -#define RBTX4938_IRC_INT 2 -#define RBTX4938_TIMER_INT 7 - -/* These are the virtual IRQ numbers, we divide all IRQ's into - * 'spaces', the 'space' determines where and how to enable/disable - * that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new - * IRQ hardware is supported. - */ -#define RBTX4938_NR_IRQ_IOC 8 - -#define RBTX4938_IRQ_IRC TXX9_IRQ_BASE -#define RBTX4938_IRQ_IOC (TXX9_IRQ_BASE + TX4938_NUM_IR) -#define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC) - -#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR) -#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR) -#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n)) -#define RBTX4938_IRQ_IRC_SIO(n) (RBTX4938_IRQ_IRC + TX4938_IR_SIO(n)) -#define RBTX4938_IRQ_IRC_DMA(ch, n) (RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch, n)) -#define RBTX4938_IRQ_IRC_PIO (RBTX4938_IRQ_IRC + TX4938_IR_PIO) -#define RBTX4938_IRQ_IRC_PDMAC (RBTX4938_IRQ_IRC + TX4938_IR_PDMAC) -#define RBTX4938_IRQ_IRC_PCIC (RBTX4938_IRQ_IRC + TX4938_IR_PCIC) -#define RBTX4938_IRQ_IRC_TMR(n) (RBTX4938_IRQ_IRC + TX4938_IR_TMR(n)) -#define RBTX4938_IRQ_IRC_NDFMC (RBTX4938_IRQ_IRC + TX4938_IR_NDFMC) -#define RBTX4938_IRQ_IRC_PCIERR (RBTX4938_IRQ_IRC + TX4938_IR_PCIERR) -#define RBTX4938_IRQ_IRC_PCIPME (RBTX4938_IRQ_IRC + TX4938_IR_PCIPME) -#define RBTX4938_IRQ_IRC_ACLC (RBTX4938_IRQ_IRC + TX4938_IR_ACLC) -#define RBTX4938_IRQ_IRC_ACLCPME (RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME) -#define RBTX4938_IRQ_IRC_PCIC1 (RBTX4938_IRQ_IRC + TX4938_IR_PCIC1) -#define RBTX4938_IRQ_IRC_SPI (RBTX4938_IRQ_IRC + TX4938_IR_SPI) -#define RBTX4938_IRQ_IOC_PCID (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCID) -#define RBTX4938_IRQ_IOC_PCIC (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIC) -#define RBTX4938_IRQ_IOC_PCIB (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIB) -#define RBTX4938_IRQ_IOC_PCIA (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIA) -#define RBTX4938_IRQ_IOC_RTC (RBTX4938_IRQ_IOC + RBTX4938_INTB_RTC) -#define RBTX4938_IRQ_IOC_ATA (RBTX4938_IRQ_IOC + RBTX4938_INTB_ATA) -#define RBTX4938_IRQ_IOC_MODEM (RBTX4938_IRQ_IOC + RBTX4938_INTB_MODEM) -#define RBTX4938_IRQ_IOC_SWINT (RBTX4938_IRQ_IOC + RBTX4938_INTB_SWINT) - - -/* IOC (PCI, etc) */ -#define RBTX4938_IRQ_IOCINT (TXX9_IRQ_BASE + TX4938_IR_INT(0)) -/* Onboard 10M Ether */ -#define RBTX4938_IRQ_ETHER (TXX9_IRQ_BASE + TX4938_IR_INT(1)) - -#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base) -#define RBTX4938_RTL_8019_IRQ (RBTX4938_IRQ_ETHER) - -void rbtx4938_prom_init(void); -void rbtx4938_irq_setup(void); -struct pci_dev; -int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); - -#endif /* __ASM_TXX9_RBTX4938_H */ diff --git a/include/asm-mips/txx9/rbtx4939.h b/include/asm-mips/txx9/rbtx4939.h deleted file mode 100644 index 1acf428c0b4f..000000000000 --- a/include/asm-mips/txx9/rbtx4939.h +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Definitions for RBTX4939 - * - * (C) Copyright TOSHIBA CORPORATION 2005-2006 - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_TXX9_RBTX4939_H -#define __ASM_TXX9_RBTX4939_H - -#include -#include -#include -#include - -/* Address map */ -#define RBTX4939_IOC_REG_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000) -#define RBTX4939_BOARD_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000) -#define RBTX4939_IOC_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000002) -#define RBTX4939_CONFIG1_ADDR (IO_BASE + TXX9_CE(1) + 0x00000004) -#define RBTX4939_CONFIG2_ADDR (IO_BASE + TXX9_CE(1) + 0x00000006) -#define RBTX4939_CONFIG3_ADDR (IO_BASE + TXX9_CE(1) + 0x00000008) -#define RBTX4939_CONFIG4_ADDR (IO_BASE + TXX9_CE(1) + 0x0000000a) -#define RBTX4939_USTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00001000) -#define RBTX4939_UDIPSW_ADDR (IO_BASE + TXX9_CE(1) + 0x00001002) -#define RBTX4939_BDIPSW_ADDR (IO_BASE + TXX9_CE(1) + 0x00001004) -#define RBTX4939_IEN_ADDR (IO_BASE + TXX9_CE(1) + 0x00002000) -#define RBTX4939_IPOL_ADDR (IO_BASE + TXX9_CE(1) + 0x00002002) -#define RBTX4939_IFAC1_ADDR (IO_BASE + TXX9_CE(1) + 0x00002004) -#define RBTX4939_IFAC2_ADDR (IO_BASE + TXX9_CE(1) + 0x00002006) -#define RBTX4939_SOFTINT_ADDR (IO_BASE + TXX9_CE(1) + 0x00003000) -#define RBTX4939_ISASTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00004000) -#define RBTX4939_PCISTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00004002) -#define RBTX4939_ROME_ADDR (IO_BASE + TXX9_CE(1) + 0x00004004) -#define RBTX4939_SPICS_ADDR (IO_BASE + TXX9_CE(1) + 0x00004006) -#define RBTX4939_AUDI_ADDR (IO_BASE + TXX9_CE(1) + 0x00004008) -#define RBTX4939_ISAGPIO_ADDR (IO_BASE + TXX9_CE(1) + 0x0000400a) -#define RBTX4939_PE1_ADDR (IO_BASE + TXX9_CE(1) + 0x00005000) -#define RBTX4939_PE2_ADDR (IO_BASE + TXX9_CE(1) + 0x00005002) -#define RBTX4939_PE3_ADDR (IO_BASE + TXX9_CE(1) + 0x00005004) -#define RBTX4939_VP_ADDR (IO_BASE + TXX9_CE(1) + 0x00005006) -#define RBTX4939_VPRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00005008) -#define RBTX4939_VPSOUT_ADDR (IO_BASE + TXX9_CE(1) + 0x0000500a) -#define RBTX4939_VPSIN_ADDR (IO_BASE + TXX9_CE(1) + 0x0000500c) -#define RBTX4939_7SEG_ADDR(s, ch) \ - (IO_BASE + TXX9_CE(1) + 0x00006000 + (s) * 16 + ((ch) & 3) * 2) -#define RBTX4939_SOFTRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00007000) -#define RBTX4939_RESETEN_ADDR (IO_BASE + TXX9_CE(1) + 0x00007002) -#define RBTX4939_RESETSTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00007004) -#define RBTX4939_ETHER_BASE (IO_BASE + TXX9_CE(1) + 0x00020000) - -/* Ethernet port address */ -#define RBTX4939_ETHER_ADDR (RBTX4939_ETHER_BASE + 0x300) - -/* bits for IEN/IPOL/IFAC */ -#define RBTX4938_INTB_ISA0 0 -#define RBTX4938_INTB_ISA11 1 -#define RBTX4938_INTB_ISA12 2 -#define RBTX4938_INTB_ISA15 3 -#define RBTX4938_INTB_I2S 4 -#define RBTX4938_INTB_SW 5 -#define RBTX4938_INTF_ISA0 (1 << RBTX4938_INTB_ISA0) -#define RBTX4938_INTF_ISA11 (1 << RBTX4938_INTB_ISA11) -#define RBTX4938_INTF_ISA12 (1 << RBTX4938_INTB_ISA12) -#define RBTX4938_INTF_ISA15 (1 << RBTX4938_INTB_ISA15) -#define RBTX4938_INTF_I2S (1 << RBTX4938_INTB_I2S) -#define RBTX4938_INTF_SW (1 << RBTX4938_INTB_SW) - -/* bits for PE1,PE2,PE3 */ -#define RBTX4939_PE1_ATA(ch) (0x01 << (ch)) -#define RBTX4939_PE1_RMII(ch) (0x04 << (ch)) -#define RBTX4939_PE2_SIO0 0x01 -#define RBTX4939_PE2_SIO2 0x02 -#define RBTX4939_PE2_SIO3 0x04 -#define RBTX4939_PE2_CIR 0x08 -#define RBTX4939_PE2_SPI 0x10 -#define RBTX4939_PE2_GPIO 0x20 -#define RBTX4939_PE3_VP 0x01 -#define RBTX4939_PE3_VP_P 0x02 -#define RBTX4939_PE3_VP_S 0x04 - -#define rbtx4939_board_rev_addr ((u8 __iomem *)RBTX4939_BOARD_REV_ADDR) -#define rbtx4939_ioc_rev_addr ((u8 __iomem *)RBTX4939_IOC_REV_ADDR) -#define rbtx4939_config1_addr ((u8 __iomem *)RBTX4939_CONFIG1_ADDR) -#define rbtx4939_config2_addr ((u8 __iomem *)RBTX4939_CONFIG2_ADDR) -#define rbtx4939_config3_addr ((u8 __iomem *)RBTX4939_CONFIG3_ADDR) -#define rbtx4939_config4_addr ((u8 __iomem *)RBTX4939_CONFIG4_ADDR) -#define rbtx4939_ustat_addr ((u8 __iomem *)RBTX4939_USTAT_ADDR) -#define rbtx4939_udipsw_addr ((u8 __iomem *)RBTX4939_UDIPSW_ADDR) -#define rbtx4939_bdipsw_addr ((u8 __iomem *)RBTX4939_BDIPSW_ADDR) -#define rbtx4939_ien_addr ((u8 __iomem *)RBTX4939_IEN_ADDR) -#define rbtx4939_ipol_addr ((u8 __iomem *)RBTX4939_IPOL_ADDR) -#define rbtx4939_ifac1_addr ((u8 __iomem *)RBTX4939_IFAC1_ADDR) -#define rbtx4939_ifac2_addr ((u8 __iomem *)RBTX4939_IFAC2_ADDR) -#define rbtx4939_softint_addr ((u8 __iomem *)RBTX4939_SOFTINT_ADDR) -#define rbtx4939_isastat_addr ((u8 __iomem *)RBTX4939_ISASTAT_ADDR) -#define rbtx4939_pcistat_addr ((u8 __iomem *)RBTX4939_PCISTAT_ADDR) -#define rbtx4939_rome_addr ((u8 __iomem *)RBTX4939_ROME_ADDR) -#define rbtx4939_spics_addr ((u8 __iomem *)RBTX4939_SPICS_ADDR) -#define rbtx4939_audi_addr ((u8 __iomem *)RBTX4939_AUDI_ADDR) -#define rbtx4939_isagpio_addr ((u8 __iomem *)RBTX4939_ISAGPIO_ADDR) -#define rbtx4939_pe1_addr ((u8 __iomem *)RBTX4939_PE1_ADDR) -#define rbtx4939_pe2_addr ((u8 __iomem *)RBTX4939_PE2_ADDR) -#define rbtx4939_pe3_addr ((u8 __iomem *)RBTX4939_PE3_ADDR) -#define rbtx4939_vp_addr ((u8 __iomem *)RBTX4939_VP_ADDR) -#define rbtx4939_vpreset_addr ((u8 __iomem *)RBTX4939_VPRESET_ADDR) -#define rbtx4939_vpsout_addr ((u8 __iomem *)RBTX4939_VPSOUT_ADDR) -#define rbtx4939_vpsin_addr ((u8 __iomem *)RBTX4939_VPSIN_ADDR) -#define rbtx4939_7seg_addr(s, ch) \ - ((u8 __iomem *)RBTX4939_7SEG_ADDR(s, ch)) -#define rbtx4939_softreset_addr ((u8 __iomem *)RBTX4939_SOFTRESET_ADDR) -#define rbtx4939_reseten_addr ((u8 __iomem *)RBTX4939_RESETEN_ADDR) -#define rbtx4939_resetstat_addr ((u8 __iomem *)RBTX4939_RESETSTAT_ADDR) - -/* - * IRQ mappings - */ -#define RBTX4939_NR_IRQ_IOC 8 - -#define RBTX4939_IRQ_IOC (TXX9_IRQ_BASE + TX4939_NUM_IR) -#define RBTX4939_IRQ_END (RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC) - -/* IOC (ISA, etc) */ -#define RBTX4939_IRQ_IOCINT (TXX9_IRQ_BASE + TX4939_IR_INT(0)) -/* Onboard 10M Ether */ -#define RBTX4939_IRQ_ETHER (TXX9_IRQ_BASE + TX4939_IR_INT(1)) - -void rbtx4939_prom_init(void); -void rbtx4939_irq_setup(void); - -#endif /* __ASM_TXX9_RBTX4939_H */ diff --git a/include/asm-mips/txx9/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h deleted file mode 100644 index d1d6332b4ca6..000000000000 --- a/include/asm-mips/txx9/smsc_fdc37m81x.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Interface for smsc fdc48m81x Super IO chip - * - * Author: MontaVista Software, Inc. source@mvista.com - * - * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Copyright (C) 2004 MontaVista Software Inc. - * Manish Lachwani, mlachwani@mvista.com - */ - -#ifndef _SMSC_FDC37M81X_H_ -#define _SMSC_FDC37M81X_H_ - -/* Common Registers */ -#define SMSC_FDC37M81X_CONFIG_INDEX 0x00 -#define SMSC_FDC37M81X_CONFIG_DATA 0x01 -#define SMSC_FDC37M81X_CONF 0x02 -#define SMSC_FDC37M81X_INDEX 0x03 -#define SMSC_FDC37M81X_DNUM 0x07 -#define SMSC_FDC37M81X_DID 0x20 -#define SMSC_FDC37M81X_DREV 0x21 -#define SMSC_FDC37M81X_PCNT 0x22 -#define SMSC_FDC37M81X_PMGT 0x23 -#define SMSC_FDC37M81X_OSC 0x24 -#define SMSC_FDC37M81X_CONFPA0 0x26 -#define SMSC_FDC37M81X_CONFPA1 0x27 -#define SMSC_FDC37M81X_TEST4 0x2B -#define SMSC_FDC37M81X_TEST5 0x2C -#define SMSC_FDC37M81X_TEST1 0x2D -#define SMSC_FDC37M81X_TEST2 0x2E -#define SMSC_FDC37M81X_TEST3 0x2F - -/* Logical device numbers */ -#define SMSC_FDC37M81X_FDD 0x00 -#define SMSC_FDC37M81X_PARALLEL 0x03 -#define SMSC_FDC37M81X_SERIAL1 0x04 -#define SMSC_FDC37M81X_SERIAL2 0x05 -#define SMSC_FDC37M81X_KBD 0x07 -#define SMSC_FDC37M81X_AUXIO 0x08 -#define SMSC_FDC37M81X_NONE 0xff - -/* Logical device Config Registers */ -#define SMSC_FDC37M81X_ACTIVE 0x30 -#define SMSC_FDC37M81X_BASEADDR0 0x60 -#define SMSC_FDC37M81X_BASEADDR1 0x61 -#define SMSC_FDC37M81X_INT 0x70 -#define SMSC_FDC37M81X_INT2 0x72 -#define SMSC_FDC37M81X_LDCR_F0 0xF0 - -/* Chip Config Values */ -#define SMSC_FDC37M81X_CONFIG_ENTER 0x55 -#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa -#define SMSC_FDC37M81X_CHIP_ID 0x4d - -unsigned long smsc_fdc37m81x_init(unsigned long port); - -void smsc_fdc37m81x_config_beg(void); - -void smsc_fdc37m81x_config_end(void); - -u8 smsc_fdc37m81x_config_get(u8 reg); -void smsc_fdc37m81x_config_set(u8 reg, u8 val); - -#endif diff --git a/include/asm-mips/txx9/spi.h b/include/asm-mips/txx9/spi.h deleted file mode 100644 index 0d727f354557..000000000000 --- a/include/asm-mips/txx9/spi.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Definitions for TX4937/TX4938 SPI - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#ifndef __ASM_TXX9_SPI_H -#define __ASM_TXX9_SPI_H - -#include - -#ifdef CONFIG_SPI -int spi_eeprom_register(int busid, int chipid, int size); -int spi_eeprom_read(int busid, int chipid, - int address, unsigned char *buf, int len); -#else -static inline int spi_eeprom_register(int busid, int chipid, int size) -{ - return -ENODEV; -} -static inline int spi_eeprom_read(int busid, int chipid, - int address, unsigned char *buf, int len) -{ - return -ENODEV; -} -#endif - -#endif /* __ASM_TXX9_SPI_H */ diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h deleted file mode 100644 index dc30c8d42061..000000000000 --- a/include/asm-mips/txx9/tx3927.h +++ /dev/null @@ -1,341 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Toshiba Corporation - */ -#ifndef __ASM_TXX9_TX3927_H -#define __ASM_TXX9_TX3927_H - -#define TX3927_REG_BASE 0xfffe0000UL -#define TX3927_REG_SIZE 0x00010000 -#define TX3927_SDRAMC_REG (TX3927_REG_BASE + 0x8000) -#define TX3927_ROMC_REG (TX3927_REG_BASE + 0x9000) -#define TX3927_DMA_REG (TX3927_REG_BASE + 0xb000) -#define TX3927_IRC_REG (TX3927_REG_BASE + 0xc000) -#define TX3927_PCIC_REG (TX3927_REG_BASE + 0xd000) -#define TX3927_CCFG_REG (TX3927_REG_BASE + 0xe000) -#define TX3927_NR_TMR 3 -#define TX3927_TMR_REG(ch) (TX3927_REG_BASE + 0xf000 + (ch) * 0x100) -#define TX3927_NR_SIO 2 -#define TX3927_SIO_REG(ch) (TX3927_REG_BASE + 0xf300 + (ch) * 0x100) -#define TX3927_PIO_REG (TX3927_REG_BASE + 0xf500) - -struct tx3927_sdramc_reg { - volatile unsigned long cr[8]; - volatile unsigned long tr[3]; - volatile unsigned long cmd; - volatile unsigned long smrs[2]; -}; - -struct tx3927_romc_reg { - volatile unsigned long cr[8]; -}; - -struct tx3927_dma_reg { - struct tx3927_dma_ch_reg { - volatile unsigned long cha; - volatile unsigned long sar; - volatile unsigned long dar; - volatile unsigned long cntr; - volatile unsigned long sair; - volatile unsigned long dair; - volatile unsigned long ccr; - volatile unsigned long csr; - } ch[4]; - volatile unsigned long dbr[8]; - volatile unsigned long tdhr; - volatile unsigned long mcr; - volatile unsigned long unused0; -}; - -#include - -#ifdef __BIG_ENDIAN -#define endian_def_s2(e1, e2) \ - volatile unsigned short e1, e2 -#define endian_def_sb2(e1, e2, e3) \ - volatile unsigned short e1;volatile unsigned char e2, e3 -#define endian_def_b2s(e1, e2, e3) \ - volatile unsigned char e1, e2;volatile unsigned short e3 -#define endian_def_b4(e1, e2, e3, e4) \ - volatile unsigned char e1, e2, e3, e4 -#else -#define endian_def_s2(e1, e2) \ - volatile unsigned short e2, e1 -#define endian_def_sb2(e1, e2, e3) \ - volatile unsigned char e3, e2;volatile unsigned short e1 -#define endian_def_b2s(e1, e2, e3) \ - volatile unsigned short e3;volatile unsigned char e2, e1 -#define endian_def_b4(e1, e2, e3, e4) \ - volatile unsigned char e4, e3, e2, e1 -#endif - -struct tx3927_pcic_reg { - endian_def_s2(did, vid); - endian_def_s2(pcistat, pcicmd); - endian_def_b4(cc, scc, rpli, rid); - endian_def_b4(unused0, ht, mlt, cls); - volatile unsigned long ioba; /* +10 */ - volatile unsigned long mba; - volatile unsigned long unused1[5]; - endian_def_s2(svid, ssvid); - volatile unsigned long unused2; /* +30 */ - endian_def_sb2(unused3, unused4, capptr); - volatile unsigned long unused5; - endian_def_b4(ml, mg, ip, il); - volatile unsigned long unused6; /* +40 */ - volatile unsigned long istat; - volatile unsigned long iim; - volatile unsigned long rrt; - volatile unsigned long unused7[3]; /* +50 */ - volatile unsigned long ipbmma; - volatile unsigned long ipbioma; /* +60 */ - volatile unsigned long ilbmma; - volatile unsigned long ilbioma; - volatile unsigned long unused8[9]; - volatile unsigned long tc; /* +90 */ - volatile unsigned long tstat; - volatile unsigned long tim; - volatile unsigned long tccmd; - volatile unsigned long pcirrt; /* +a0 */ - volatile unsigned long pcirrt_cmd; - volatile unsigned long pcirrdt; - volatile unsigned long unused9[3]; - volatile unsigned long tlboap; - volatile unsigned long tlbiap; - volatile unsigned long tlbmma; /* +c0 */ - volatile unsigned long tlbioma; - volatile unsigned long sc_msg; - volatile unsigned long sc_be; - volatile unsigned long tbl; /* +d0 */ - volatile unsigned long unused10[3]; - volatile unsigned long pwmng; /* +e0 */ - volatile unsigned long pwmngs; - volatile unsigned long unused11[6]; - volatile unsigned long req_trace; /* +100 */ - volatile unsigned long pbapmc; - volatile unsigned long pbapms; - volatile unsigned long pbapmim; - volatile unsigned long bm; /* +110 */ - volatile unsigned long cpcibrs; - volatile unsigned long cpcibgs; - volatile unsigned long pbacs; - volatile unsigned long iobas; /* +120 */ - volatile unsigned long mbas; - volatile unsigned long lbc; - volatile unsigned long lbstat; - volatile unsigned long lbim; /* +130 */ - volatile unsigned long pcistatim; - volatile unsigned long ica; - volatile unsigned long icd; - volatile unsigned long iiadp; /* +140 */ - volatile unsigned long iscdp; - volatile unsigned long mmas; - volatile unsigned long iomas; - volatile unsigned long ipciaddr; /* +150 */ - volatile unsigned long ipcidata; - volatile unsigned long ipcibe; -}; - -struct tx3927_ccfg_reg { - volatile unsigned long ccfg; - volatile unsigned long crir; - volatile unsigned long pcfg; - volatile unsigned long tear; - volatile unsigned long pdcr; -}; - -/* - * SDRAMC - */ - -/* - * ROMC - */ - -/* - * DMA - */ -/* bits for MCR */ -#define TX3927_DMA_MCR_EIS(ch) (0x10000000<<(ch)) -#define TX3927_DMA_MCR_DIS(ch) (0x01000000<<(ch)) -#define TX3927_DMA_MCR_RSFIF 0x00000080 -#define TX3927_DMA_MCR_FIFUM(ch) (0x00000008<<(ch)) -#define TX3927_DMA_MCR_LE 0x00000004 -#define TX3927_DMA_MCR_RPRT 0x00000002 -#define TX3927_DMA_MCR_MSTEN 0x00000001 - -/* bits for CCRn */ -#define TX3927_DMA_CCR_DBINH 0x04000000 -#define TX3927_DMA_CCR_SBINH 0x02000000 -#define TX3927_DMA_CCR_CHRST 0x01000000 -#define TX3927_DMA_CCR_RVBYTE 0x00800000 -#define TX3927_DMA_CCR_ACKPOL 0x00400000 -#define TX3927_DMA_CCR_REQPL 0x00200000 -#define TX3927_DMA_CCR_EGREQ 0x00100000 -#define TX3927_DMA_CCR_CHDN 0x00080000 -#define TX3927_DMA_CCR_DNCTL 0x00060000 -#define TX3927_DMA_CCR_EXTRQ 0x00010000 -#define TX3927_DMA_CCR_INTRQD 0x0000e000 -#define TX3927_DMA_CCR_INTENE 0x00001000 -#define TX3927_DMA_CCR_INTENC 0x00000800 -#define TX3927_DMA_CCR_INTENT 0x00000400 -#define TX3927_DMA_CCR_CHNEN 0x00000200 -#define TX3927_DMA_CCR_XFACT 0x00000100 -#define TX3927_DMA_CCR_SNOP 0x00000080 -#define TX3927_DMA_CCR_DSTINC 0x00000040 -#define TX3927_DMA_CCR_SRCINC 0x00000020 -#define TX3927_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c) -#define TX3927_DMA_CCR_XFSZ_1W TX3927_DMA_CCR_XFSZ(2) -#define TX3927_DMA_CCR_XFSZ_4W TX3927_DMA_CCR_XFSZ(4) -#define TX3927_DMA_CCR_XFSZ_8W TX3927_DMA_CCR_XFSZ(5) -#define TX3927_DMA_CCR_XFSZ_16W TX3927_DMA_CCR_XFSZ(6) -#define TX3927_DMA_CCR_XFSZ_32W TX3927_DMA_CCR_XFSZ(7) -#define TX3927_DMA_CCR_MEMIO 0x00000002 -#define TX3927_DMA_CCR_ONEAD 0x00000001 - -/* bits for CSRn */ -#define TX3927_DMA_CSR_CHNACT 0x00000100 -#define TX3927_DMA_CSR_ABCHC 0x00000080 -#define TX3927_DMA_CSR_NCHNC 0x00000040 -#define TX3927_DMA_CSR_NTRNFC 0x00000020 -#define TX3927_DMA_CSR_EXTDN 0x00000010 -#define TX3927_DMA_CSR_CFERR 0x00000008 -#define TX3927_DMA_CSR_CHERR 0x00000004 -#define TX3927_DMA_CSR_DESERR 0x00000002 -#define TX3927_DMA_CSR_SORERR 0x00000001 - -/* - * IRC - */ -#define TX3927_IR_INT0 0 -#define TX3927_IR_INT1 1 -#define TX3927_IR_INT2 2 -#define TX3927_IR_INT3 3 -#define TX3927_IR_INT4 4 -#define TX3927_IR_INT5 5 -#define TX3927_IR_SIO0 6 -#define TX3927_IR_SIO1 7 -#define TX3927_IR_SIO(ch) (6 + (ch)) -#define TX3927_IR_DMA 8 -#define TX3927_IR_PIO 9 -#define TX3927_IR_PCI 10 -#define TX3927_IR_TMR(ch) (13 + (ch)) -#define TX3927_NUM_IR 16 - -/* - * PCIC - */ -/* bits for PCICMD */ -/* see PCI_COMMAND_XXX in linux/pci.h */ - -/* bits for PCISTAT */ -/* see PCI_STATUS_XXX in linux/pci.h */ -#define PCI_STATUS_NEW_CAP 0x0010 - -/* bits for ISTAT/IIM */ -#define TX3927_PCIC_IIM_ALL 0x00001600 - -/* bits for TC */ -#define TX3927_PCIC_TC_OF16E 0x00000020 -#define TX3927_PCIC_TC_IF8E 0x00000010 -#define TX3927_PCIC_TC_OF8E 0x00000008 - -/* bits for TSTAT/TIM */ -#define TX3927_PCIC_TIM_ALL 0x0003ffff - -/* bits for IOBA/MBA */ -/* see PCI_BASE_ADDRESS_XXX in linux/pci.h */ - -/* bits for PBAPMC */ -#define TX3927_PCIC_PBAPMC_RPBA 0x00000004 -#define TX3927_PCIC_PBAPMC_PBAEN 0x00000002 -#define TX3927_PCIC_PBAPMC_BMCEN 0x00000001 - -/* bits for LBSTAT/LBIM */ -#define TX3927_PCIC_LBIM_ALL 0x0000003e - -/* bits for PCISTATIM (see also PCI_STATUS_XXX in linux/pci.h */ -#define TX3927_PCIC_PCISTATIM_ALL 0x0000f900 - -/* bits for LBC */ -#define TX3927_PCIC_LBC_IBSE 0x00004000 -#define TX3927_PCIC_LBC_TIBSE 0x00002000 -#define TX3927_PCIC_LBC_TMFBSE 0x00001000 -#define TX3927_PCIC_LBC_HRST 0x00000800 -#define TX3927_PCIC_LBC_SRST 0x00000400 -#define TX3927_PCIC_LBC_EPCAD 0x00000200 -#define TX3927_PCIC_LBC_MSDSE 0x00000100 -#define TX3927_PCIC_LBC_CRR 0x00000080 -#define TX3927_PCIC_LBC_ILMDE 0x00000040 -#define TX3927_PCIC_LBC_ILIDE 0x00000020 - -#define TX3927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) -#define TX3927_PCIC_MAX_DEVNU TX3927_PCIC_IDSEL_AD_TO_SLOT(32) - -/* - * CCFG - */ -/* CCFG : Chip Configuration */ -#define TX3927_CCFG_TLBOFF 0x00020000 -#define TX3927_CCFG_BEOW 0x00010000 -#define TX3927_CCFG_WR 0x00008000 -#define TX3927_CCFG_TOE 0x00004000 -#define TX3927_CCFG_PCIXARB 0x00002000 -#define TX3927_CCFG_PCI3 0x00001000 -#define TX3927_CCFG_PSNP 0x00000800 -#define TX3927_CCFG_PPRI 0x00000400 -#define TX3927_CCFG_PLLM 0x00000030 -#define TX3927_CCFG_ENDIAN 0x00000004 -#define TX3927_CCFG_HALT 0x00000002 -#define TX3927_CCFG_ACEHOLD 0x00000001 - -/* PCFG : Pin Configuration */ -#define TX3927_PCFG_SYSCLKEN 0x08000000 -#define TX3927_PCFG_SDRCLKEN_ALL 0x07c00000 -#define TX3927_PCFG_SDRCLKEN(ch) (0x00400000<<(ch)) -#define TX3927_PCFG_PCICLKEN_ALL 0x003c0000 -#define TX3927_PCFG_PCICLKEN(ch) (0x00040000<<(ch)) -#define TX3927_PCFG_SELALL 0x0003ffff -#define TX3927_PCFG_SELCS 0x00020000 -#define TX3927_PCFG_SELDSF 0x00010000 -#define TX3927_PCFG_SELSIOC_ALL 0x0000c000 -#define TX3927_PCFG_SELSIOC(ch) (0x00004000<<(ch)) -#define TX3927_PCFG_SELSIO_ALL 0x00003000 -#define TX3927_PCFG_SELSIO(ch) (0x00001000<<(ch)) -#define TX3927_PCFG_SELTMR_ALL 0x00000e00 -#define TX3927_PCFG_SELTMR(ch) (0x00000200<<(ch)) -#define TX3927_PCFG_SELDONE 0x00000100 -#define TX3927_PCFG_INTDMA_ALL 0x000000f0 -#define TX3927_PCFG_INTDMA(ch) (0x00000010<<(ch)) -#define TX3927_PCFG_SELDMA_ALL 0x0000000f -#define TX3927_PCFG_SELDMA(ch) (0x00000001<<(ch)) - -#define tx3927_sdramcptr ((struct tx3927_sdramc_reg *)TX3927_SDRAMC_REG) -#define tx3927_romcptr ((struct tx3927_romc_reg *)TX3927_ROMC_REG) -#define tx3927_dmaptr ((struct tx3927_dma_reg *)TX3927_DMA_REG) -#define tx3927_pcicptr ((struct tx3927_pcic_reg *)TX3927_PCIC_REG) -#define tx3927_ccfgptr ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG) -#define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch)) -#define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG) - -#define TX3927_REV_PCODE() (tx3927_ccfgptr->crir >> 16) -#define TX3927_ROMC_BA(ch) (tx3927_romcptr->cr[(ch)] & 0xfff00000) -#define TX3927_ROMC_SIZE(ch) \ - (0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf)) -#define TX3927_ROMC_WIDTH(ch) (32 >> ((tx3927_romcptr->cr[(ch)] >> 7) & 0x1)) - -void tx3927_wdt_init(void); -void tx3927_setup(void); -void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr); -void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask); -struct pci_controller; -void tx3927_pcic_setup(struct pci_controller *channel, - unsigned long sdram_size, int extarb); -void tx3927_setup_pcierr_irq(void); -void tx3927_irq_init(void); -void tx3927_mtd_init(int ch); - -#endif /* __ASM_TXX9_TX3927_H */ diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h deleted file mode 100644 index 7d813f1cb98d..000000000000 --- a/include/asm-mips/txx9/tx4927.h +++ /dev/null @@ -1,269 +0,0 @@ -/* - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2006 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_TXX9_TX4927_H -#define __ASM_TXX9_TX4927_H - -#include -#include -#include -#include - -#ifdef CONFIG_64BIT -#define TX4927_REG_BASE 0xffffffffff1f0000UL -#else -#define TX4927_REG_BASE 0xff1f0000UL -#endif -#define TX4927_REG_SIZE 0x00010000 - -#define TX4927_SDRAMC_REG (TX4927_REG_BASE + 0x8000) -#define TX4927_EBUSC_REG (TX4927_REG_BASE + 0x9000) -#define TX4927_PCIC_REG (TX4927_REG_BASE + 0xd000) -#define TX4927_CCFG_REG (TX4927_REG_BASE + 0xe000) -#define TX4927_IRC_REG (TX4927_REG_BASE + 0xf600) -#define TX4927_NR_TMR 3 -#define TX4927_TMR_REG(ch) (TX4927_REG_BASE + 0xf000 + (ch) * 0x100) -#define TX4927_NR_SIO 2 -#define TX4927_SIO_REG(ch) (TX4927_REG_BASE + 0xf300 + (ch) * 0x100) -#define TX4927_PIO_REG (TX4927_REG_BASE + 0xf500) - -#define TX4927_IR_ECCERR 0 -#define TX4927_IR_WTOERR 1 -#define TX4927_NUM_IR_INT 6 -#define TX4927_IR_INT(n) (2 + (n)) -#define TX4927_NUM_IR_SIO 2 -#define TX4927_IR_SIO(n) (8 + (n)) -#define TX4927_NUM_IR_DMA 4 -#define TX4927_IR_DMA(n) (10 + (n)) -#define TX4927_IR_PIO 14 -#define TX4927_IR_PDMAC 15 -#define TX4927_IR_PCIC 16 -#define TX4927_NUM_IR_TMR 3 -#define TX4927_IR_TMR(n) (17 + (n)) -#define TX4927_IR_PCIERR 22 -#define TX4927_IR_PCIPME 23 -#define TX4927_IR_ACLC 24 -#define TX4927_IR_ACLCPME 25 -#define TX4927_NUM_IR 32 - -#define TX4927_IRC_INT 2 /* IP[2] in Status register */ - -#define TX4927_NUM_PIO 16 - -struct tx4927_sdramc_reg { - u64 cr[4]; - u64 unused0[4]; - u64 tr; - u64 unused1[2]; - u64 cmd; -}; - -struct tx4927_ebusc_reg { - u64 cr[8]; -}; - -struct tx4927_ccfg_reg { - u64 ccfg; - u64 crir; - u64 pcfg; - u64 toea; - u64 clkctr; - u64 unused0; - u64 garbc; - u64 unused1; - u64 unused2; - u64 ramp; -}; - -/* - * CCFG - */ -/* CCFG : Chip Configuration */ -#define TX4927_CCFG_WDRST 0x0000020000000000ULL -#define TX4927_CCFG_WDREXEN 0x0000010000000000ULL -#define TX4927_CCFG_BCFG_MASK 0x000000ff00000000ULL -#define TX4927_CCFG_TINTDIS 0x01000000 -#define TX4927_CCFG_PCI66 0x00800000 -#define TX4927_CCFG_PCIMODE 0x00400000 -#define TX4927_CCFG_DIVMODE_MASK 0x000e0000 -#define TX4927_CCFG_DIVMODE_8 (0x0 << 17) -#define TX4927_CCFG_DIVMODE_12 (0x1 << 17) -#define TX4927_CCFG_DIVMODE_16 (0x2 << 17) -#define TX4927_CCFG_DIVMODE_10 (0x3 << 17) -#define TX4927_CCFG_DIVMODE_2 (0x4 << 17) -#define TX4927_CCFG_DIVMODE_3 (0x5 << 17) -#define TX4927_CCFG_DIVMODE_4 (0x6 << 17) -#define TX4927_CCFG_DIVMODE_2_5 (0x7 << 17) -#define TX4927_CCFG_BEOW 0x00010000 -#define TX4927_CCFG_WR 0x00008000 -#define TX4927_CCFG_TOE 0x00004000 -#define TX4927_CCFG_PCIARB 0x00002000 -#define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800 -#define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000 -#define TX4927_CCFG_PCIDIVMODE_3 0x00000800 -#define TX4927_CCFG_PCIDIVMODE_5 0x00001000 -#define TX4927_CCFG_PCIDIVMODE_6 0x00001800 -#define TX4927_CCFG_SYSSP_MASK 0x000000c0 -#define TX4927_CCFG_ENDIAN 0x00000004 -#define TX4927_CCFG_HALT 0x00000002 -#define TX4927_CCFG_ACEHOLD 0x00000001 -#define TX4927_CCFG_W1CBITS (TX4927_CCFG_WDRST | TX4927_CCFG_BEOW) - -/* PCFG : Pin Configuration */ -#define TX4927_PCFG_SDCLKDLY_MASK 0x30000000 -#define TX4927_PCFG_SDCLKDLY(d) ((d)<<28) -#define TX4927_PCFG_SYSCLKEN 0x08000000 -#define TX4927_PCFG_SDCLKEN_ALL 0x07800000 -#define TX4927_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) -#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000 -#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) -#define TX4927_PCFG_SEL2 0x00000200 -#define TX4927_PCFG_SEL1 0x00000100 -#define TX4927_PCFG_DMASEL_ALL 0x000000ff -#define TX4927_PCFG_DMASEL0_MASK 0x00000003 -#define TX4927_PCFG_DMASEL1_MASK 0x0000000c -#define TX4927_PCFG_DMASEL2_MASK 0x00000030 -#define TX4927_PCFG_DMASEL3_MASK 0x000000c0 -#define TX4927_PCFG_DMASEL0_DRQ0 0x00000000 -#define TX4927_PCFG_DMASEL0_SIO1 0x00000001 -#define TX4927_PCFG_DMASEL0_ACL0 0x00000002 -#define TX4927_PCFG_DMASEL0_ACL2 0x00000003 -#define TX4927_PCFG_DMASEL1_DRQ1 0x00000000 -#define TX4927_PCFG_DMASEL1_SIO1 0x00000004 -#define TX4927_PCFG_DMASEL1_ACL1 0x00000008 -#define TX4927_PCFG_DMASEL1_ACL3 0x0000000c -#define TX4927_PCFG_DMASEL2_DRQ2 0x00000000 /* SEL2=0 */ -#define TX4927_PCFG_DMASEL2_SIO0 0x00000010 /* SEL2=0 */ -#define TX4927_PCFG_DMASEL2_ACL1 0x00000000 /* SEL2=1 */ -#define TX4927_PCFG_DMASEL2_ACL2 0x00000020 /* SEL2=1 */ -#define TX4927_PCFG_DMASEL2_ACL0 0x00000030 /* SEL2=1 */ -#define TX4927_PCFG_DMASEL3_DRQ3 0x00000000 -#define TX4927_PCFG_DMASEL3_SIO0 0x00000040 -#define TX4927_PCFG_DMASEL3_ACL3 0x00000080 -#define TX4927_PCFG_DMASEL3_ACL1 0x000000c0 - -/* CLKCTR : Clock Control */ -#define TX4927_CLKCTR_ACLCKD 0x02000000 -#define TX4927_CLKCTR_PIOCKD 0x01000000 -#define TX4927_CLKCTR_DMACKD 0x00800000 -#define TX4927_CLKCTR_PCICKD 0x00400000 -#define TX4927_CLKCTR_TM0CKD 0x00100000 -#define TX4927_CLKCTR_TM1CKD 0x00080000 -#define TX4927_CLKCTR_TM2CKD 0x00040000 -#define TX4927_CLKCTR_SIO0CKD 0x00020000 -#define TX4927_CLKCTR_SIO1CKD 0x00010000 -#define TX4927_CLKCTR_ACLRST 0x00000200 -#define TX4927_CLKCTR_PIORST 0x00000100 -#define TX4927_CLKCTR_DMARST 0x00000080 -#define TX4927_CLKCTR_PCIRST 0x00000040 -#define TX4927_CLKCTR_TM0RST 0x00000010 -#define TX4927_CLKCTR_TM1RST 0x00000008 -#define TX4927_CLKCTR_TM2RST 0x00000004 -#define TX4927_CLKCTR_SIO0RST 0x00000002 -#define TX4927_CLKCTR_SIO1RST 0x00000001 - -#define tx4927_sdramcptr \ - ((struct tx4927_sdramc_reg __iomem *)TX4927_SDRAMC_REG) -#define tx4927_pcicptr \ - ((struct tx4927_pcic_reg __iomem *)TX4927_PCIC_REG) -#define tx4927_ccfgptr \ - ((struct tx4927_ccfg_reg __iomem *)TX4927_CCFG_REG) -#define tx4927_ebuscptr \ - ((struct tx4927_ebusc_reg __iomem *)TX4927_EBUSC_REG) -#define tx4927_pioptr ((struct txx9_pio_reg __iomem *)TX4927_PIO_REG) - -#define TX4927_REV_PCODE() \ - ((__u32)__raw_readq(&tx4927_ccfgptr->crir) >> 16) - -#define TX4927_SDRAMC_CR(ch) __raw_readq(&tx4927_sdramcptr->cr[(ch)]) -#define TX4927_SDRAMC_BA(ch) ((TX4927_SDRAMC_CR(ch) >> 49) << 21) -#define TX4927_SDRAMC_SIZE(ch) \ - ((((TX4927_SDRAMC_CR(ch) >> 33) & 0x7fff) + 1) << 21) - -#define TX4927_EBUSC_CR(ch) __raw_readq(&tx4927_ebuscptr->cr[(ch)]) -#define TX4927_EBUSC_BA(ch) ((TX4927_EBUSC_CR(ch) >> 48) << 20) -#define TX4927_EBUSC_SIZE(ch) \ - (0x00100000 << ((unsigned long)(TX4927_EBUSC_CR(ch) >> 8) & 0xf)) -#define TX4927_EBUSC_WIDTH(ch) \ - (64 >> ((__u32)(TX4927_EBUSC_CR(ch) >> 20) & 0x3)) - -/* utilities */ -static inline void txx9_clear64(__u64 __iomem *adr, __u64 bits) -{ -#ifdef CONFIG_32BIT - unsigned long flags; - local_irq_save(flags); -#endif - ____raw_writeq(____raw_readq(adr) & ~bits, adr); -#ifdef CONFIG_32BIT - local_irq_restore(flags); -#endif -} -static inline void txx9_set64(__u64 __iomem *adr, __u64 bits) -{ -#ifdef CONFIG_32BIT - unsigned long flags; - local_irq_save(flags); -#endif - ____raw_writeq(____raw_readq(adr) | bits, adr); -#ifdef CONFIG_32BIT - local_irq_restore(flags); -#endif -} - -/* These functions are not interrupt safe. */ -static inline void tx4927_ccfg_clear(__u64 bits) -{ - ____raw_writeq(____raw_readq(&tx4927_ccfgptr->ccfg) - & ~(TX4927_CCFG_W1CBITS | bits), - &tx4927_ccfgptr->ccfg); -} -static inline void tx4927_ccfg_set(__u64 bits) -{ - ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg) - & ~TX4927_CCFG_W1CBITS) | bits, - &tx4927_ccfgptr->ccfg); -} -static inline void tx4927_ccfg_change(__u64 change, __u64 new) -{ - ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg) - & ~(TX4927_CCFG_W1CBITS | change)) | - new, - &tx4927_ccfgptr->ccfg); -} - -unsigned int tx4927_get_mem_size(void); -void tx4927_wdt_init(void); -void tx4927_setup(void); -void tx4927_time_init(unsigned int tmrnr); -void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask); -int tx4927_report_pciclk(void); -int tx4927_pciclk66_setup(void); -void tx4927_setup_pcierr_irq(void); -void tx4927_irq_init(void); -void tx4927_mtd_init(int ch); - -#endif /* __ASM_TXX9_TX4927_H */ diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h deleted file mode 100644 index c470b8a5fe57..000000000000 --- a/include/asm-mips/txx9/tx4927pcic.h +++ /dev/null @@ -1,203 +0,0 @@ -/* - * include/asm-mips/txx9/tx4927pcic.h - * TX4927 PCI controller definitions. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_TXX9_TX4927PCIC_H -#define __ASM_TXX9_TX4927PCIC_H - -#include -#include - -struct tx4927_pcic_reg { - u32 pciid; - u32 pcistatus; - u32 pciccrev; - u32 pcicfg1; - u32 p2gm0plbase; /* +10 */ - u32 p2gm0pubase; - u32 p2gm1plbase; - u32 p2gm1pubase; - u32 p2gm2pbase; /* +20 */ - u32 p2giopbase; - u32 unused0; - u32 pcisid; - u32 unused1; /* +30 */ - u32 pcicapptr; - u32 unused2; - u32 pcicfg2; - u32 g2ptocnt; /* +40 */ - u32 unused3[15]; - u32 g2pstatus; /* +80 */ - u32 g2pmask; - u32 pcisstatus; - u32 pcimask; - u32 p2gcfg; /* +90 */ - u32 p2gstatus; - u32 p2gmask; - u32 p2gccmd; - u32 unused4[24]; /* +a0 */ - u32 pbareqport; /* +100 */ - u32 pbacfg; - u32 pbastatus; - u32 pbamask; - u32 pbabm; /* +110 */ - u32 pbacreq; - u32 pbacgnt; - u32 pbacstate; - u64 g2pmgbase[3]; /* +120 */ - u64 g2piogbase; - u32 g2pmmask[3]; /* +140 */ - u32 g2piomask; - u64 g2pmpbase[3]; /* +150 */ - u64 g2piopbase; - u32 pciccfg; /* +170 */ - u32 pcicstatus; - u32 pcicmask; - u32 unused5; - u64 p2gmgbase[3]; /* +180 */ - u64 p2giogbase; - u32 g2pcfgadrs; /* +1a0 */ - u32 g2pcfgdata; - u32 unused6[8]; - u32 g2pintack; - u32 g2pspc; - u32 unused7[12]; /* +1d0 */ - u64 pdmca; /* +200 */ - u64 pdmga; - u64 pdmpa; - u64 pdmctr; - u64 pdmcfg; /* +220 */ - u64 pdmsts; -}; - -/* bits for PCICMD */ -/* see PCI_COMMAND_XXX in linux/pci_regs.h */ - -/* bits for PCISTAT */ -/* see PCI_STATUS_XXX in linux/pci_regs.h */ - -/* bits for IOBA/MBA */ -/* see PCI_BASE_ADDRESS_XXX in linux/pci_regs.h */ - -/* bits for G2PSTATUS/G2PMASK */ -#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003 -#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002 -#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001 - -/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci_regs.h */ -#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900 - -/* bits for PBACFG */ -#define TX4927_PCIC_PBACFG_FIXPA 0x00000008 -#define TX4927_PCIC_PBACFG_RPBA 0x00000004 -#define TX4927_PCIC_PBACFG_PBAEN 0x00000002 -#define TX4927_PCIC_PBACFG_BMCEN 0x00000001 - -/* bits for PBASTATUS/PBAMASK */ -#define TX4927_PCIC_PBASTATUS_ALL 0x00000001 -#define TX4927_PCIC_PBASTATUS_BM 0x00000001 - -/* bits for G2PMnGBASE */ -#define TX4927_PCIC_G2PMnGBASE_BSDIS 0x0000002000000000ULL -#define TX4927_PCIC_G2PMnGBASE_ECHG 0x0000001000000000ULL - -/* bits for G2PIOGBASE */ -#define TX4927_PCIC_G2PIOGBASE_BSDIS 0x0000002000000000ULL -#define TX4927_PCIC_G2PIOGBASE_ECHG 0x0000001000000000ULL - -/* bits for PCICSTATUS/PCICMASK */ -#define TX4927_PCIC_PCICSTATUS_ALL 0x000007b8 -#define TX4927_PCIC_PCICSTATUS_PME 0x00000400 -#define TX4927_PCIC_PCICSTATUS_TLB 0x00000200 -#define TX4927_PCIC_PCICSTATUS_NIB 0x00000100 -#define TX4927_PCIC_PCICSTATUS_ZIB 0x00000080 -#define TX4927_PCIC_PCICSTATUS_PERR 0x00000020 -#define TX4927_PCIC_PCICSTATUS_SERR 0x00000010 -#define TX4927_PCIC_PCICSTATUS_GBE 0x00000008 -#define TX4927_PCIC_PCICSTATUS_IWB 0x00000002 -#define TX4927_PCIC_PCICSTATUS_E2PDONE 0x00000001 - -/* bits for PCICCFG */ -#define TX4927_PCIC_PCICCFG_GBWC_MASK 0x0fff0000 -#define TX4927_PCIC_PCICCFG_HRST 0x00000800 -#define TX4927_PCIC_PCICCFG_SRST 0x00000400 -#define TX4927_PCIC_PCICCFG_IRBER 0x00000200 -#define TX4927_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch)) -#define TX4927_PCIC_PCICCFG_G2PM0EN 0x00000100 -#define TX4927_PCIC_PCICCFG_G2PM1EN 0x00000080 -#define TX4927_PCIC_PCICCFG_G2PM2EN 0x00000040 -#define TX4927_PCIC_PCICCFG_G2PIOEN 0x00000020 -#define TX4927_PCIC_PCICCFG_TCAR 0x00000010 -#define TX4927_PCIC_PCICCFG_ICAEN 0x00000008 - -/* bits for P2GMnGBASE */ -#define TX4927_PCIC_P2GMnGBASE_TMEMEN 0x0000004000000000ULL -#define TX4927_PCIC_P2GMnGBASE_TBSDIS 0x0000002000000000ULL -#define TX4927_PCIC_P2GMnGBASE_TECHG 0x0000001000000000ULL - -/* bits for P2GIOGBASE */ -#define TX4927_PCIC_P2GIOGBASE_TIOEN 0x0000004000000000ULL -#define TX4927_PCIC_P2GIOGBASE_TBSDIS 0x0000002000000000ULL -#define TX4927_PCIC_P2GIOGBASE_TECHG 0x0000001000000000ULL - -#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) -#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32) - -/* bits for PDMCFG */ -#define TX4927_PCIC_PDMCFG_RSTFIFO 0x00200000 -#define TX4927_PCIC_PDMCFG_EXFER 0x00100000 -#define TX4927_PCIC_PDMCFG_REQDLY_MASK 0x00003800 -#define TX4927_PCIC_PDMCFG_REQDLY_NONE (0 << 11) -#define TX4927_PCIC_PDMCFG_REQDLY_16 (1 << 11) -#define TX4927_PCIC_PDMCFG_REQDLY_32 (2 << 11) -#define TX4927_PCIC_PDMCFG_REQDLY_64 (3 << 11) -#define TX4927_PCIC_PDMCFG_REQDLY_128 (4 << 11) -#define TX4927_PCIC_PDMCFG_REQDLY_256 (5 << 11) -#define TX4927_PCIC_PDMCFG_REQDLY_512 (6 << 11) -#define TX4927_PCIC_PDMCFG_REQDLY_1024 (7 << 11) -#define TX4927_PCIC_PDMCFG_ERRIE 0x00000400 -#define TX4927_PCIC_PDMCFG_NCCMPIE 0x00000200 -#define TX4927_PCIC_PDMCFG_NTCMPIE 0x00000100 -#define TX4927_PCIC_PDMCFG_CHNEN 0x00000080 -#define TX4927_PCIC_PDMCFG_XFRACT 0x00000040 -#define TX4927_PCIC_PDMCFG_BSWAP 0x00000020 -#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c -#define TX4927_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000 -#define TX4927_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004 -#define TX4927_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008 -#define TX4927_PCIC_PDMCFG_XFRDIRC 0x00000002 -#define TX4927_PCIC_PDMCFG_CHRST 0x00000001 - -/* bits for PDMSTS */ -#define TX4927_PCIC_PDMSTS_REQCNT_MASK 0x3f000000 -#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000 -#define TX4927_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000 -#define TX4927_PCIC_PDMSTS_FIFORP_MASK 0x00030000 -#define TX4927_PCIC_PDMSTS_ERRINT 0x00000800 -#define TX4927_PCIC_PDMSTS_DONEINT 0x00000400 -#define TX4927_PCIC_PDMSTS_CHNEN 0x00000200 -#define TX4927_PCIC_PDMSTS_XFRACT 0x00000100 -#define TX4927_PCIC_PDMSTS_ACCMP 0x00000080 -#define TX4927_PCIC_PDMSTS_NCCMP 0x00000040 -#define TX4927_PCIC_PDMSTS_NTCMP 0x00000020 -#define TX4927_PCIC_PDMSTS_CFGERR 0x00000008 -#define TX4927_PCIC_PDMSTS_PCIERR 0x00000004 -#define TX4927_PCIC_PDMSTS_CHNERR 0x00000002 -#define TX4927_PCIC_PDMSTS_DATAERR 0x00000001 -#define TX4927_PCIC_PDMSTS_ALL_CMP 0x000000e0 -#define TX4927_PCIC_PDMSTS_ALL_ERR 0x0000000f - -struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr( - struct pci_controller *channel); -void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, - struct pci_controller *channel, int extarb); -void tx4927_report_pcic_status(void); -char *tx4927_pcibios_setup(char *str); -void tx4927_dump_pcic_settings(void); -irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id); - -#endif /* __ASM_TXX9_TX4927PCIC_H */ diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h deleted file mode 100644 index 989e7751135a..000000000000 --- a/include/asm-mips/txx9/tx4938.h +++ /dev/null @@ -1,295 +0,0 @@ -/* - * Definitions for TX4937/TX4938 - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#ifndef __ASM_TXX9_TX4938_H -#define __ASM_TXX9_TX4938_H - -/* some controllers are compatible with 4927 */ -#include - -#ifdef CONFIG_64BIT -#define TX4938_REG_BASE 0xffffffffff1f0000UL /* == TX4937_REG_BASE */ -#else -#define TX4938_REG_BASE 0xff1f0000UL /* == TX4937_REG_BASE */ -#endif -#define TX4938_REG_SIZE 0x00010000 /* == TX4937_REG_SIZE */ - -/* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */ -#define TX4938_NDFMC_REG (TX4938_REG_BASE + 0x5000) -#define TX4938_SRAMC_REG (TX4938_REG_BASE + 0x6000) -#define TX4938_PCIC1_REG (TX4938_REG_BASE + 0x7000) -#define TX4938_SDRAMC_REG (TX4938_REG_BASE + 0x8000) -#define TX4938_EBUSC_REG (TX4938_REG_BASE + 0x9000) -#define TX4938_DMA_REG(ch) (TX4938_REG_BASE + 0xb000 + (ch) * 0x800) -#define TX4938_PCIC_REG (TX4938_REG_BASE + 0xd000) -#define TX4938_CCFG_REG (TX4938_REG_BASE + 0xe000) -#define TX4938_NR_TMR 3 -#define TX4938_TMR_REG(ch) ((TX4938_REG_BASE + 0xf000) + (ch) * 0x100) -#define TX4938_NR_SIO 2 -#define TX4938_SIO_REG(ch) ((TX4938_REG_BASE + 0xf300) + (ch) * 0x100) -#define TX4938_PIO_REG (TX4938_REG_BASE + 0xf500) -#define TX4938_IRC_REG (TX4938_REG_BASE + 0xf600) -#define TX4938_ACLC_REG (TX4938_REG_BASE + 0xf700) -#define TX4938_SPI_REG (TX4938_REG_BASE + 0xf800) - -struct tx4938_sramc_reg { - u64 cr; -}; - -struct tx4938_ccfg_reg { - u64 ccfg; - u64 crir; - u64 pcfg; - u64 toea; - u64 clkctr; - u64 unused0; - u64 garbc; - u64 unused1; - u64 unused2; - u64 ramp; - u64 unused3; - u64 jmpadr; -}; - -/* - * IRC - */ - -#define TX4938_IR_ECCERR 0 -#define TX4938_IR_WTOERR 1 -#define TX4938_NUM_IR_INT 6 -#define TX4938_IR_INT(n) (2 + (n)) -#define TX4938_NUM_IR_SIO 2 -#define TX4938_IR_SIO(n) (8 + (n)) -#define TX4938_NUM_IR_DMA 4 -#define TX4938_IR_DMA(ch, n) ((ch ? 27 : 10) + (n)) /* 10-13, 27-30 */ -#define TX4938_IR_PIO 14 -#define TX4938_IR_PDMAC 15 -#define TX4938_IR_PCIC 16 -#define TX4938_NUM_IR_TMR 3 -#define TX4938_IR_TMR(n) (17 + (n)) -#define TX4938_IR_NDFMC 21 -#define TX4938_IR_PCIERR 22 -#define TX4938_IR_PCIPME 23 -#define TX4938_IR_ACLC 24 -#define TX4938_IR_ACLCPME 25 -#define TX4938_IR_PCIC1 26 -#define TX4938_IR_SPI 31 -#define TX4938_NUM_IR 32 -/* multiplex */ -#define TX4938_IR_ETH0 TX4938_IR_INT(4) -#define TX4938_IR_ETH1 TX4938_IR_INT(3) - -#define TX4938_IRC_INT 2 /* IP[2] in Status register */ - -#define TX4938_NUM_PIO 16 - -/* - * CCFG - */ -/* CCFG : Chip Configuration */ -#define TX4938_CCFG_WDRST 0x0000020000000000ULL -#define TX4938_CCFG_WDREXEN 0x0000010000000000ULL -#define TX4938_CCFG_BCFG_MASK 0x000000ff00000000ULL -#define TX4938_CCFG_TINTDIS 0x01000000 -#define TX4938_CCFG_PCI66 0x00800000 -#define TX4938_CCFG_PCIMODE 0x00400000 -#define TX4938_CCFG_PCI1_66 0x00200000 -#define TX4938_CCFG_DIVMODE_MASK 0x001e0000 -#define TX4938_CCFG_DIVMODE_2 (0x4 << 17) -#define TX4938_CCFG_DIVMODE_2_5 (0xf << 17) -#define TX4938_CCFG_DIVMODE_3 (0x5 << 17) -#define TX4938_CCFG_DIVMODE_4 (0x6 << 17) -#define TX4938_CCFG_DIVMODE_4_5 (0xd << 17) -#define TX4938_CCFG_DIVMODE_8 (0x0 << 17) -#define TX4938_CCFG_DIVMODE_10 (0xb << 17) -#define TX4938_CCFG_DIVMODE_12 (0x1 << 17) -#define TX4938_CCFG_DIVMODE_16 (0x2 << 17) -#define TX4938_CCFG_DIVMODE_18 (0x9 << 17) -#define TX4938_CCFG_BEOW 0x00010000 -#define TX4938_CCFG_WR 0x00008000 -#define TX4938_CCFG_TOE 0x00004000 -#define TX4938_CCFG_PCIARB 0x00002000 -#define TX4938_CCFG_PCIDIVMODE_MASK 0x00001c00 -#define TX4938_CCFG_PCIDIVMODE_4 (0x1 << 10) -#define TX4938_CCFG_PCIDIVMODE_4_5 (0x3 << 10) -#define TX4938_CCFG_PCIDIVMODE_5 (0x5 << 10) -#define TX4938_CCFG_PCIDIVMODE_5_5 (0x7 << 10) -#define TX4938_CCFG_PCIDIVMODE_8 (0x0 << 10) -#define TX4938_CCFG_PCIDIVMODE_9 (0x2 << 10) -#define TX4938_CCFG_PCIDIVMODE_10 (0x4 << 10) -#define TX4938_CCFG_PCIDIVMODE_11 (0x6 << 10) -#define TX4938_CCFG_PCI1DMD 0x00000100 -#define TX4938_CCFG_SYSSP_MASK 0x000000c0 -#define TX4938_CCFG_ENDIAN 0x00000004 -#define TX4938_CCFG_HALT 0x00000002 -#define TX4938_CCFG_ACEHOLD 0x00000001 - -/* PCFG : Pin Configuration */ -#define TX4938_PCFG_ETH0_SEL 0x8000000000000000ULL -#define TX4938_PCFG_ETH1_SEL 0x4000000000000000ULL -#define TX4938_PCFG_ATA_SEL 0x2000000000000000ULL -#define TX4938_PCFG_ISA_SEL 0x1000000000000000ULL -#define TX4938_PCFG_SPI_SEL 0x0800000000000000ULL -#define TX4938_PCFG_NDF_SEL 0x0400000000000000ULL -#define TX4938_PCFG_SDCLKDLY_MASK 0x30000000 -#define TX4938_PCFG_SDCLKDLY(d) ((d)<<28) -#define TX4938_PCFG_SYSCLKEN 0x08000000 -#define TX4938_PCFG_SDCLKEN_ALL 0x07800000 -#define TX4938_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) -#define TX4938_PCFG_PCICLKEN_ALL 0x003f0000 -#define TX4938_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) -#define TX4938_PCFG_SEL2 0x00000200 -#define TX4938_PCFG_SEL1 0x00000100 -#define TX4938_PCFG_DMASEL_ALL 0x0000000f -#define TX4938_PCFG_DMASEL0_DRQ0 0x00000000 -#define TX4938_PCFG_DMASEL0_SIO1 0x00000001 -#define TX4938_PCFG_DMASEL1_DRQ1 0x00000000 -#define TX4938_PCFG_DMASEL1_SIO1 0x00000002 -#define TX4938_PCFG_DMASEL2_DRQ2 0x00000000 -#define TX4938_PCFG_DMASEL2_SIO0 0x00000004 -#define TX4938_PCFG_DMASEL3_DRQ3 0x00000000 -#define TX4938_PCFG_DMASEL3_SIO0 0x00000008 - -/* CLKCTR : Clock Control */ -#define TX4938_CLKCTR_NDFCKD 0x0001000000000000ULL -#define TX4938_CLKCTR_NDFRST 0x0000000100000000ULL -#define TX4938_CLKCTR_ETH1CKD 0x80000000 -#define TX4938_CLKCTR_ETH0CKD 0x40000000 -#define TX4938_CLKCTR_SPICKD 0x20000000 -#define TX4938_CLKCTR_SRAMCKD 0x10000000 -#define TX4938_CLKCTR_PCIC1CKD 0x08000000 -#define TX4938_CLKCTR_DMA1CKD 0x04000000 -#define TX4938_CLKCTR_ACLCKD 0x02000000 -#define TX4938_CLKCTR_PIOCKD 0x01000000 -#define TX4938_CLKCTR_DMACKD 0x00800000 -#define TX4938_CLKCTR_PCICKD 0x00400000 -#define TX4938_CLKCTR_TM0CKD 0x00100000 -#define TX4938_CLKCTR_TM1CKD 0x00080000 -#define TX4938_CLKCTR_TM2CKD 0x00040000 -#define TX4938_CLKCTR_SIO0CKD 0x00020000 -#define TX4938_CLKCTR_SIO1CKD 0x00010000 -#define TX4938_CLKCTR_ETH1RST 0x00008000 -#define TX4938_CLKCTR_ETH0RST 0x00004000 -#define TX4938_CLKCTR_SPIRST 0x00002000 -#define TX4938_CLKCTR_SRAMRST 0x00001000 -#define TX4938_CLKCTR_PCIC1RST 0x00000800 -#define TX4938_CLKCTR_DMA1RST 0x00000400 -#define TX4938_CLKCTR_ACLRST 0x00000200 -#define TX4938_CLKCTR_PIORST 0x00000100 -#define TX4938_CLKCTR_DMARST 0x00000080 -#define TX4938_CLKCTR_PCIRST 0x00000040 -#define TX4938_CLKCTR_TM0RST 0x00000010 -#define TX4938_CLKCTR_TM1RST 0x00000008 -#define TX4938_CLKCTR_TM2RST 0x00000004 -#define TX4938_CLKCTR_SIO0RST 0x00000002 -#define TX4938_CLKCTR_SIO1RST 0x00000001 - -/* - * DMA - */ -/* bits for MCR */ -#define TX4938_DMA_MCR_EIS(ch) (0x10000000<<(ch)) -#define TX4938_DMA_MCR_DIS(ch) (0x01000000<<(ch)) -#define TX4938_DMA_MCR_RSFIF 0x00000080 -#define TX4938_DMA_MCR_FIFUM(ch) (0x00000008<<(ch)) -#define TX4938_DMA_MCR_RPRT 0x00000002 -#define TX4938_DMA_MCR_MSTEN 0x00000001 - -/* bits for CCRn */ -#define TX4938_DMA_CCR_IMMCHN 0x20000000 -#define TX4938_DMA_CCR_USEXFSZ 0x10000000 -#define TX4938_DMA_CCR_LE 0x08000000 -#define TX4938_DMA_CCR_DBINH 0x04000000 -#define TX4938_DMA_CCR_SBINH 0x02000000 -#define TX4938_DMA_CCR_CHRST 0x01000000 -#define TX4938_DMA_CCR_RVBYTE 0x00800000 -#define TX4938_DMA_CCR_ACKPOL 0x00400000 -#define TX4938_DMA_CCR_REQPL 0x00200000 -#define TX4938_DMA_CCR_EGREQ 0x00100000 -#define TX4938_DMA_CCR_CHDN 0x00080000 -#define TX4938_DMA_CCR_DNCTL 0x00060000 -#define TX4938_DMA_CCR_EXTRQ 0x00010000 -#define TX4938_DMA_CCR_INTRQD 0x0000e000 -#define TX4938_DMA_CCR_INTENE 0x00001000 -#define TX4938_DMA_CCR_INTENC 0x00000800 -#define TX4938_DMA_CCR_INTENT 0x00000400 -#define TX4938_DMA_CCR_CHNEN 0x00000200 -#define TX4938_DMA_CCR_XFACT 0x00000100 -#define TX4938_DMA_CCR_SMPCHN 0x00000020 -#define TX4938_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c) -#define TX4938_DMA_CCR_XFSZ_1W TX4938_DMA_CCR_XFSZ(2) -#define TX4938_DMA_CCR_XFSZ_2W TX4938_DMA_CCR_XFSZ(3) -#define TX4938_DMA_CCR_XFSZ_4W TX4938_DMA_CCR_XFSZ(4) -#define TX4938_DMA_CCR_XFSZ_8W TX4938_DMA_CCR_XFSZ(5) -#define TX4938_DMA_CCR_XFSZ_16W TX4938_DMA_CCR_XFSZ(6) -#define TX4938_DMA_CCR_XFSZ_32W TX4938_DMA_CCR_XFSZ(7) -#define TX4938_DMA_CCR_MEMIO 0x00000002 -#define TX4938_DMA_CCR_SNGAD 0x00000001 - -/* bits for CSRn */ -#define TX4938_DMA_CSR_CHNEN 0x00000400 -#define TX4938_DMA_CSR_STLXFER 0x00000200 -#define TX4938_DMA_CSR_CHNACT 0x00000100 -#define TX4938_DMA_CSR_ABCHC 0x00000080 -#define TX4938_DMA_CSR_NCHNC 0x00000040 -#define TX4938_DMA_CSR_NTRNFC 0x00000020 -#define TX4938_DMA_CSR_EXTDN 0x00000010 -#define TX4938_DMA_CSR_CFERR 0x00000008 -#define TX4938_DMA_CSR_CHERR 0x00000004 -#define TX4938_DMA_CSR_DESERR 0x00000002 -#define TX4938_DMA_CSR_SORERR 0x00000001 - -#define tx4938_sdramcptr tx4927_sdramcptr -#define tx4938_ebuscptr tx4927_ebuscptr -#define tx4938_pcicptr tx4927_pcicptr -#define tx4938_pcic1ptr \ - ((struct tx4927_pcic_reg __iomem *)TX4938_PCIC1_REG) -#define tx4938_ccfgptr \ - ((struct tx4938_ccfg_reg __iomem *)TX4938_CCFG_REG) -#define tx4938_pioptr ((struct txx9_pio_reg __iomem *)TX4938_PIO_REG) -#define tx4938_sramcptr \ - ((struct tx4938_sramc_reg __iomem *)TX4938_SRAMC_REG) - - -#define TX4938_REV_PCODE() \ - ((__u32)__raw_readq(&tx4938_ccfgptr->crir) >> 16) - -#define tx4938_ccfg_clear(bits) tx4927_ccfg_clear(bits) -#define tx4938_ccfg_set(bits) tx4927_ccfg_set(bits) -#define tx4938_ccfg_change(change, new) tx4927_ccfg_change(change, new) - -#define TX4938_SDRAMC_CR(ch) TX4927_SDRAMC_CR(ch) -#define TX4938_SDRAMC_BA(ch) TX4927_SDRAMC_BA(ch) -#define TX4938_SDRAMC_SIZE(ch) TX4927_SDRAMC_SIZE(ch) - -#define TX4938_EBUSC_CR(ch) TX4927_EBUSC_CR(ch) -#define TX4938_EBUSC_BA(ch) TX4927_EBUSC_BA(ch) -#define TX4938_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch) -#define TX4938_EBUSC_WIDTH(ch) TX4927_EBUSC_WIDTH(ch) - -#define tx4938_get_mem_size() tx4927_get_mem_size() -void tx4938_wdt_init(void); -void tx4938_setup(void); -void tx4938_time_init(unsigned int tmrnr); -void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask); -void tx4938_spi_init(int busid); -void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1); -int tx4938_report_pciclk(void); -void tx4938_report_pci1clk(void); -int tx4938_pciclk66_setup(void); -struct pci_dev; -int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot); -void tx4938_setup_pcierr_irq(void); -void tx4938_irq_init(void); -void tx4938_mtd_init(int ch); - -#endif diff --git a/include/asm-mips/txx9/tx4939.h b/include/asm-mips/txx9/tx4939.h deleted file mode 100644 index 7ce2dff3b7cc..000000000000 --- a/include/asm-mips/txx9/tx4939.h +++ /dev/null @@ -1,544 +0,0 @@ -/* - * Definitions for TX4939 - * - * Copyright (C) 2000-2001,2005-2006 Toshiba Corporation - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_TXX9_TX4939_H -#define __ASM_TXX9_TX4939_H - -/* some controllers are compatible with 4927/4938 */ -#include - -#ifdef CONFIG_64BIT -#define TX4939_REG_BASE 0xffffffffff1f0000UL /* == TX4938_REG_BASE */ -#else -#define TX4939_REG_BASE 0xff1f0000UL /* == TX4938_REG_BASE */ -#endif -#define TX4939_REG_SIZE 0x00010000 /* == TX4938_REG_SIZE */ - -#define TX4939_ATA_REG(ch) (TX4939_REG_BASE + 0x3000 + (ch) * 0x1000) -#define TX4939_NDFMC_REG (TX4939_REG_BASE + 0x5000) -#define TX4939_SRAMC_REG (TX4939_REG_BASE + 0x6000) -#define TX4939_CRYPTO_REG (TX4939_REG_BASE + 0x6800) -#define TX4939_PCIC1_REG (TX4939_REG_BASE + 0x7000) -#define TX4939_DDRC_REG (TX4939_REG_BASE + 0x8000) -#define TX4939_EBUSC_REG (TX4939_REG_BASE + 0x9000) -#define TX4939_VPC_REG (TX4939_REG_BASE + 0xa000) -#define TX4939_DMA_REG(ch) (TX4939_REG_BASE + 0xb000 + (ch) * 0x800) -#define TX4939_PCIC_REG (TX4939_REG_BASE + 0xd000) -#define TX4939_CCFG_REG (TX4939_REG_BASE + 0xe000) -#define TX4939_IRC_REG (TX4939_REG_BASE + 0xe800) -#define TX4939_NR_TMR 6 /* 0xf000,0xf100,0xf200,0xfd00,0xfe00,0xff00 */ -#define TX4939_TMR_REG(ch) \ - (TX4939_REG_BASE + 0xf000 + ((ch) + ((ch) >= 3) * 10) * 0x100) -#define TX4939_NR_SIO 4 /* 0xf300, 0xf400, 0xf380, 0xf480 */ -#define TX4939_SIO_REG(ch) \ - (TX4939_REG_BASE + 0xf300 + (((ch) & 1) << 8) + (((ch) & 2) << 6)) -#define TX4939_ACLC_REG (TX4939_REG_BASE + 0xf700) -#define TX4939_SPI_REG (TX4939_REG_BASE + 0xf800) -#define TX4939_I2C_REG (TX4939_REG_BASE + 0xf900) -#define TX4939_I2S_REG (TX4939_REG_BASE + 0xfa00) -#define TX4939_RTC_REG (TX4939_REG_BASE + 0xfb00) -#define TX4939_CIR_REG (TX4939_REG_BASE + 0xfc00) - -struct tx4939_le_reg { - __u32 r; - __u32 unused; -}; - -struct tx4939_ddrc_reg { - struct tx4939_le_reg ctl[47]; - __u64 unused0[17]; - __u64 winen; - __u64 win[4]; -}; - -struct tx4939_ccfg_reg { - __u64 ccfg; - __u64 crir; - __u64 pcfg; - __u64 toea; - __u64 clkctr; - __u64 unused0; - __u64 garbc; - __u64 unused1[2]; - __u64 ramp; - __u64 unused2[2]; - __u64 dskwctrl; - __u64 mclkosc; - __u64 mclkctl; - __u64 unused3[17]; - struct { - __u64 mr; - __u64 dr; - } gpio[2]; -}; - -struct tx4939_irc_reg { - struct tx4939_le_reg den; - struct tx4939_le_reg scipb; - struct tx4939_le_reg dm[2]; - struct tx4939_le_reg lvl[16]; - struct tx4939_le_reg msk; - struct tx4939_le_reg edc; - struct tx4939_le_reg pnd0; - struct tx4939_le_reg cs; - struct tx4939_le_reg pnd1; - struct tx4939_le_reg dm2[2]; - struct tx4939_le_reg dbr[2]; - struct tx4939_le_reg dben; - struct tx4939_le_reg unused0[2]; - struct tx4939_le_reg flag[2]; - struct tx4939_le_reg pol; - struct tx4939_le_reg cnt; - struct tx4939_le_reg maskint; - struct tx4939_le_reg maskext; -}; - -struct tx4939_rtc_reg { - __u32 ctl; - __u32 adr; - __u32 dat; - __u32 tbc; -}; - -struct tx4939_crypto_reg { - struct tx4939_le_reg csr; - struct tx4939_le_reg idesptr; - struct tx4939_le_reg cdesptr; - struct tx4939_le_reg buserr; - struct tx4939_le_reg cip_tout; - struct tx4939_le_reg cir; - union { - struct { - struct tx4939_le_reg data[8]; - struct tx4939_le_reg ctrl; - } gen; - struct { - struct { - struct tx4939_le_reg l; - struct tx4939_le_reg u; - } key[3], ini; - struct tx4939_le_reg ctrl; - } des; - struct { - struct tx4939_le_reg key[4]; - struct tx4939_le_reg ini[4]; - struct tx4939_le_reg ctrl; - } aes; - struct { - struct { - struct tx4939_le_reg l; - struct tx4939_le_reg u; - } cnt; - struct tx4939_le_reg ini[5]; - struct tx4939_le_reg unused; - struct tx4939_le_reg ctrl; - } hash; - } cdr; - struct tx4939_le_reg unused0[7]; - struct tx4939_le_reg rcsr; - struct tx4939_le_reg rpr; - __u64 rdr; - __u64 ror[3]; - struct tx4939_le_reg unused1[2]; - struct tx4939_le_reg xorslr; - struct tx4939_le_reg xorsur; -}; - -struct tx4939_crypto_desc { - __u32 src; - __u32 dst; - __u32 next; - __u32 ctrl; - __u32 index; - __u32 xor; -}; - -struct tx4939_vpc_reg { - struct tx4939_le_reg csr; - struct { - struct tx4939_le_reg ctrlA; - struct tx4939_le_reg ctrlB; - struct tx4939_le_reg idesptr; - struct tx4939_le_reg cdesptr; - } port[3]; - struct tx4939_le_reg buserr; -}; - -struct tx4939_vpc_desc { - __u32 src; - __u32 next; - __u32 ctrl1; - __u32 ctrl2; -}; - -/* - * IRC - */ -#define TX4939_IR_NONE 0 -#define TX4939_IR_DDR 1 -#define TX4939_IR_WTOERR 2 -#define TX4939_NUM_IR_INT 3 -#define TX4939_IR_INT(n) (3 + (n)) -#define TX4939_NUM_IR_ETH 2 -#define TX4939_IR_ETH(n) ((n) ? 43 : 6) -#define TX4939_IR_VIDEO 7 -#define TX4939_IR_CIR 8 -#define TX4939_NUM_IR_SIO 4 -#define TX4939_IR_SIO(n) ((n) ? 43 + (n) : 9) /* 9,44-46 */ -#define TX4939_NUM_IR_DMA 4 -#define TX4939_IR_DMA(ch, n) (((ch) ? 22 : 10) + (n)) /* 10-13,22-25 */ -#define TX4939_IR_IRC 14 -#define TX4939_IR_PDMAC 15 -#define TX4939_NUM_IR_TMR 6 -#define TX4939_IR_TMR(n) (((n) >= 3 ? 45 : 16) + (n)) /* 16-18,48-50 */ -#define TX4939_NUM_IR_ATA 2 -#define TX4939_IR_ATA(n) (19 + (n)) -#define TX4939_IR_ACLC 21 -#define TX4939_IR_CIPHER 26 -#define TX4939_IR_INTA 27 -#define TX4939_IR_INTB 28 -#define TX4939_IR_INTC 29 -#define TX4939_IR_INTD 30 -#define TX4939_IR_I2C 33 -#define TX4939_IR_SPI 34 -#define TX4939_IR_PCIC 35 -#define TX4939_IR_PCIC1 36 -#define TX4939_IR_PCIERR 37 -#define TX4939_IR_PCIPME 38 -#define TX4939_IR_NDFMC 39 -#define TX4939_IR_ACLCPME 40 -#define TX4939_IR_RTC 41 -#define TX4939_IR_RND 42 -#define TX4939_IR_I2S 47 -#define TX4939_NUM_IR 64 - -#define TX4939_IRC_INT 2 /* IP[2] in Status register */ - -/* - * CCFG - */ -/* CCFG : Chip Configuration */ -#define TX4939_CCFG_PCIBOOT 0x0000040000000000ULL -#define TX4939_CCFG_WDRST 0x0000020000000000ULL -#define TX4939_CCFG_WDREXEN 0x0000010000000000ULL -#define TX4939_CCFG_BCFG_MASK 0x000000ff00000000ULL -#define TX4939_CCFG_GTOT_MASK 0x06000000 -#define TX4939_CCFG_GTOT_4096 0x06000000 -#define TX4939_CCFG_GTOT_2048 0x04000000 -#define TX4939_CCFG_GTOT_1024 0x02000000 -#define TX4939_CCFG_GTOT_512 0x00000000 -#define TX4939_CCFG_TINTDIS 0x01000000 -#define TX4939_CCFG_PCI66 0x00800000 -#define TX4939_CCFG_PCIMODE 0x00400000 -#define TX4939_CCFG_SSCG 0x00100000 -#define TX4939_CCFG_MULCLK_MASK 0x000e0000 -#define TX4939_CCFG_MULCLK_8 (0x7 << 17) -#define TX4939_CCFG_MULCLK_9 (0x0 << 17) -#define TX4939_CCFG_MULCLK_10 (0x1 << 17) -#define TX4939_CCFG_MULCLK_11 (0x2 << 17) -#define TX4939_CCFG_MULCLK_12 (0x3 << 17) -#define TX4939_CCFG_MULCLK_13 (0x4 << 17) -#define TX4939_CCFG_MULCLK_14 (0x5 << 17) -#define TX4939_CCFG_MULCLK_15 (0x6 << 17) -#define TX4939_CCFG_BEOW 0x00010000 -#define TX4939_CCFG_WR 0x00008000 -#define TX4939_CCFG_TOE 0x00004000 -#define TX4939_CCFG_PCIARB 0x00002000 -#define TX4939_CCFG_YDIVMODE_MASK 0x00001c00 -#define TX4939_CCFG_YDIVMODE_2 (0x0 << 10) -#define TX4939_CCFG_YDIVMODE_3 (0x1 << 10) -#define TX4939_CCFG_YDIVMODE_5 (0x6 << 10) -#define TX4939_CCFG_YDIVMODE_6 (0x7 << 10) -#define TX4939_CCFG_PTSEL 0x00000200 -#define TX4939_CCFG_BESEL 0x00000100 -#define TX4939_CCFG_SYSSP_MASK 0x000000c0 -#define TX4939_CCFG_ACKSEL 0x00000020 -#define TX4939_CCFG_ROMW 0x00000010 -#define TX4939_CCFG_ENDIAN 0x00000004 -#define TX4939_CCFG_ARMODE 0x00000002 -#define TX4939_CCFG_ACEHOLD 0x00000001 - -/* PCFG : Pin Configuration */ -#define TX4939_PCFG_SIO2MODE_MASK 0xc000000000000000ULL -#define TX4939_PCFG_SIO2MODE_GPIO 0x8000000000000000ULL -#define TX4939_PCFG_SIO2MODE_SIO2 0x4000000000000000ULL -#define TX4939_PCFG_SIO2MODE_SIO0 0x0000000000000000ULL -#define TX4939_PCFG_SPIMODE 0x2000000000000000ULL -#define TX4939_PCFG_I2CMODE 0x1000000000000000ULL -#define TX4939_PCFG_I2SMODE_MASK 0x0c00000000000000ULL -#define TX4939_PCFG_I2SMODE_GPIO 0x0c00000000000000ULL -#define TX4939_PCFG_I2SMODE_I2S 0x0800000000000000ULL -#define TX4939_PCFG_I2SMODE_I2S_ALT 0x0400000000000000ULL -#define TX4939_PCFG_I2SMODE_ACLC 0x0000000000000000ULL -#define TX4939_PCFG_SIO3MODE 0x0200000000000000ULL -#define TX4939_PCFG_DMASEL3 0x0004000000000000ULL -#define TX4939_PCFG_DMASEL3_SIO0 0x0004000000000000ULL -#define TX4939_PCFG_DMASEL3_NDFC 0x0000000000000000ULL -#define TX4939_PCFG_VSSMODE 0x0000200000000000ULL -#define TX4939_PCFG_VPSMODE 0x0000100000000000ULL -#define TX4939_PCFG_ET1MODE 0x0000080000000000ULL -#define TX4939_PCFG_ET0MODE 0x0000040000000000ULL -#define TX4939_PCFG_ATA1MODE 0x0000020000000000ULL -#define TX4939_PCFG_ATA0MODE 0x0000010000000000ULL -#define TX4939_PCFG_BP_PLL 0x0000000100000000ULL - -#define TX4939_PCFG_SYSCLKEN 0x08000000 -#define TX4939_PCFG_PCICLKEN_ALL 0x000f0000 -#define TX4939_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) -#define TX4939_PCFG_SPEED1 0x00002000 -#define TX4939_PCFG_SPEED0 0x00001000 -#define TX4939_PCFG_ITMODE 0x00000300 -#define TX4939_PCFG_DMASEL_ALL (0x00000007 | TX4939_PCFG_DMASEL3) -#define TX4939_PCFG_DMASEL2 0x00000004 -#define TX4939_PCFG_DMASEL2_DRQ2 0x00000000 -#define TX4939_PCFG_DMASEL2_SIO0 0x00000004 -#define TX4939_PCFG_DMASEL1 0x00000002 -#define TX4939_PCFG_DMASEL1_DRQ1 0x00000000 -#define TX4939_PCFG_DMASEL0 0x00000001 -#define TX4939_PCFG_DMASEL0_DRQ0 0x00000000 - -/* CLKCTR : Clock Control */ -#define TX4939_CLKCTR_IOSCKD 0x8000000000000000ULL -#define TX4939_CLKCTR_SYSCKD 0x4000000000000000ULL -#define TX4939_CLKCTR_TM5CKD 0x2000000000000000ULL -#define TX4939_CLKCTR_TM4CKD 0x1000000000000000ULL -#define TX4939_CLKCTR_TM3CKD 0x0800000000000000ULL -#define TX4939_CLKCTR_CIRCKD 0x0400000000000000ULL -#define TX4939_CLKCTR_SIO3CKD 0x0200000000000000ULL -#define TX4939_CLKCTR_SIO2CKD 0x0100000000000000ULL -#define TX4939_CLKCTR_SIO1CKD 0x0080000000000000ULL -#define TX4939_CLKCTR_VPCCKD 0x0040000000000000ULL -#define TX4939_CLKCTR_EPCICKD 0x0020000000000000ULL -#define TX4939_CLKCTR_ETH1CKD 0x0008000000000000ULL -#define TX4939_CLKCTR_ATA1CKD 0x0004000000000000ULL -#define TX4939_CLKCTR_BROMCKD 0x0002000000000000ULL -#define TX4939_CLKCTR_NDCCKD 0x0001000000000000ULL -#define TX4939_CLKCTR_I2CCKD 0x0000800000000000ULL -#define TX4939_CLKCTR_ETH0CKD 0x0000400000000000ULL -#define TX4939_CLKCTR_SPICKD 0x0000200000000000ULL -#define TX4939_CLKCTR_SRAMCKD 0x0000100000000000ULL -#define TX4939_CLKCTR_PCI1CKD 0x0000080000000000ULL -#define TX4939_CLKCTR_DMA1CKD 0x0000040000000000ULL -#define TX4939_CLKCTR_ACLCKD 0x0000020000000000ULL -#define TX4939_CLKCTR_ATA0CKD 0x0000010000000000ULL -#define TX4939_CLKCTR_DMA0CKD 0x0000008000000000ULL -#define TX4939_CLKCTR_PCICCKD 0x0000004000000000ULL -#define TX4939_CLKCTR_I2SCKD 0x0000002000000000ULL -#define TX4939_CLKCTR_TM0CKD 0x0000001000000000ULL -#define TX4939_CLKCTR_TM1CKD 0x0000000800000000ULL -#define TX4939_CLKCTR_TM2CKD 0x0000000400000000ULL -#define TX4939_CLKCTR_SIO0CKD 0x0000000200000000ULL -#define TX4939_CLKCTR_CYPCKD 0x0000000100000000ULL -#define TX4939_CLKCTR_IOSRST 0x80000000 -#define TX4939_CLKCTR_SYSRST 0x40000000 -#define TX4939_CLKCTR_TM5RST 0x20000000 -#define TX4939_CLKCTR_TM4RST 0x10000000 -#define TX4939_CLKCTR_TM3RST 0x08000000 -#define TX4939_CLKCTR_CIRRST 0x04000000 -#define TX4939_CLKCTR_SIO3RST 0x02000000 -#define TX4939_CLKCTR_SIO2RST 0x01000000 -#define TX4939_CLKCTR_SIO1RST 0x00800000 -#define TX4939_CLKCTR_VPCRST 0x00400000 -#define TX4939_CLKCTR_EPCIRST 0x00200000 -#define TX4939_CLKCTR_ETH1RST 0x00080000 -#define TX4939_CLKCTR_ATA1RST 0x00040000 -#define TX4939_CLKCTR_BROMRST 0x00020000 -#define TX4939_CLKCTR_NDCRST 0x00010000 -#define TX4939_CLKCTR_I2CRST 0x00008000 -#define TX4939_CLKCTR_ETH0RST 0x00004000 -#define TX4939_CLKCTR_SPIRST 0x00002000 -#define TX4939_CLKCTR_SRAMRST 0x00001000 -#define TX4939_CLKCTR_PCI1RST 0x00000800 -#define TX4939_CLKCTR_DMA1RST 0x00000400 -#define TX4939_CLKCTR_ACLRST 0x00000200 -#define TX4939_CLKCTR_ATA0RST 0x00000100 -#define TX4939_CLKCTR_DMA0RST 0x00000080 -#define TX4939_CLKCTR_PCICRST 0x00000040 -#define TX4939_CLKCTR_I2SRST 0x00000020 -#define TX4939_CLKCTR_TM0RST 0x00000010 -#define TX4939_CLKCTR_TM1RST 0x00000008 -#define TX4939_CLKCTR_TM2RST 0x00000004 -#define TX4939_CLKCTR_SIO0RST 0x00000002 -#define TX4939_CLKCTR_CYPRST 0x00000001 - -/* - * RTC - */ -#define TX4939_RTCCTL_ALME 0x00000080 -#define TX4939_RTCCTL_ALMD 0x00000040 -#define TX4939_RTCCTL_BUSY 0x00000020 - -#define TX4939_RTCCTL_COMMAND 0x00000007 -#define TX4939_RTCCTL_COMMAND_NOP 0x00000000 -#define TX4939_RTCCTL_COMMAND_GETTIME 0x00000001 -#define TX4939_RTCCTL_COMMAND_SETTIME 0x00000002 -#define TX4939_RTCCTL_COMMAND_GETALARM 0x00000003 -#define TX4939_RTCCTL_COMMAND_SETALARM 0x00000004 - -#define TX4939_RTCTBC_PM 0x00000080 -#define TX4939_RTCTBC_COMP 0x0000007f - -#define TX4939_RTC_REG_RAMSIZE 0x00000100 -#define TX4939_RTC_REG_RWBSIZE 0x00000006 - -/* - * CRYPTO - */ -#define TX4939_CRYPTO_CSR_SAESO 0x08000000 -#define TX4939_CRYPTO_CSR_SAESI 0x04000000 -#define TX4939_CRYPTO_CSR_SDESO 0x02000000 -#define TX4939_CRYPTO_CSR_SDESI 0x01000000 -#define TX4939_CRYPTO_CSR_INDXBST_MASK 0x00700000 -#define TX4939_CRYPTO_CSR_INDXBST(n) ((n) << 20) -#define TX4939_CRYPTO_CSR_TOINT 0x00080000 -#define TX4939_CRYPTO_CSR_DCINT 0x00040000 -#define TX4939_CRYPTO_CSR_GBINT 0x00010000 -#define TX4939_CRYPTO_CSR_INDXAST_MASK 0x0000e000 -#define TX4939_CRYPTO_CSR_INDXAST(n) ((n) << 13) -#define TX4939_CRYPTO_CSR_CSWAP_MASK 0x00001800 -#define TX4939_CRYPTO_CSR_CSWAP_NONE 0x00000000 -#define TX4939_CRYPTO_CSR_CSWAP_IN 0x00000800 -#define TX4939_CRYPTO_CSR_CSWAP_OUT 0x00001000 -#define TX4939_CRYPTO_CSR_CSWAP_BOTH 0x00001800 -#define TX4939_CRYPTO_CSR_CDIV_MASK 0x00000600 -#define TX4939_CRYPTO_CSR_CDIV_DIV2 0x00000000 -#define TX4939_CRYPTO_CSR_CDIV_DIV1 0x00000200 -#define TX4939_CRYPTO_CSR_CDIV_DIV2ALT 0x00000400 -#define TX4939_CRYPTO_CSR_CDIV_DIV1ALT 0x00000600 -#define TX4939_CRYPTO_CSR_PDINT_MASK 0x000000c0 -#define TX4939_CRYPTO_CSR_PDINT_ALL 0x00000000 -#define TX4939_CRYPTO_CSR_PDINT_END 0x00000040 -#define TX4939_CRYPTO_CSR_PDINT_NEXT 0x00000080 -#define TX4939_CRYPTO_CSR_PDINT_NONE 0x000000c0 -#define TX4939_CRYPTO_CSR_GINTE 0x00000008 -#define TX4939_CRYPTO_CSR_RSTD 0x00000004 -#define TX4939_CRYPTO_CSR_RSTC 0x00000002 -#define TX4939_CRYPTO_CSR_ENCR 0x00000001 - -/* bits for tx4939_crypto_reg.cdr.gen.ctrl */ -#define TX4939_CRYPTO_CTX_ENGINE_MASK 0x00000003 -#define TX4939_CRYPTO_CTX_ENGINE_DES 0x00000000 -#define TX4939_CRYPTO_CTX_ENGINE_AES 0x00000001 -#define TX4939_CRYPTO_CTX_ENGINE_MD5 0x00000002 -#define TX4939_CRYPTO_CTX_ENGINE_SHA1 0x00000003 -#define TX4939_CRYPTO_CTX_TDMS 0x00000010 -#define TX4939_CRYPTO_CTX_CMS 0x00000020 -#define TX4939_CRYPTO_CTX_DMS 0x00000040 -#define TX4939_CRYPTO_CTX_UPDATE 0x00000080 - -/* bits for tx4939_crypto_desc.ctrl */ -#define TX4939_CRYPTO_DESC_OB_CNT_MASK 0xffe00000 -#define TX4939_CRYPTO_DESC_OB_CNT(cnt) ((cnt) << 21) -#define TX4939_CRYPTO_DESC_IB_CNT_MASK 0x001ffc00 -#define TX4939_CRYPTO_DESC_IB_CNT(cnt) ((cnt) << 10) -#define TX4939_CRYPTO_DESC_START 0x00000200 -#define TX4939_CRYPTO_DESC_END 0x00000100 -#define TX4939_CRYPTO_DESC_XOR 0x00000010 -#define TX4939_CRYPTO_DESC_LAST 0x00000008 -#define TX4939_CRYPTO_DESC_ERR_MASK 0x00000006 -#define TX4939_CRYPTO_DESC_ERR_NONE 0x00000000 -#define TX4939_CRYPTO_DESC_ERR_TOUT 0x00000002 -#define TX4939_CRYPTO_DESC_ERR_DIGEST 0x00000004 -#define TX4939_CRYPTO_DESC_OWN 0x00000001 - -/* bits for tx4939_crypto_desc.index */ -#define TX4939_CRYPTO_DESC_HASH_IDX_MASK 0x00000070 -#define TX4939_CRYPTO_DESC_HASH_IDX(idx) ((idx) << 4) -#define TX4939_CRYPTO_DESC_ENCRYPT_IDX_MASK 0x00000007 -#define TX4939_CRYPTO_DESC_ENCRYPT_IDX(idx) ((idx) << 0) - -#define TX4939_CRYPTO_NR_SET 6 - -#define TX4939_CRYPTO_RCSR_INTE 0x00000008 -#define TX4939_CRYPTO_RCSR_RST 0x00000004 -#define TX4939_CRYPTO_RCSR_FIN 0x00000002 -#define TX4939_CRYPTO_RCSR_ST 0x00000001 - -/* - * VPC - */ -#define TX4939_VPC_CSR_GBINT 0x00010000 -#define TX4939_VPC_CSR_SWAPO 0x00000020 -#define TX4939_VPC_CSR_SWAPI 0x00000010 -#define TX4939_VPC_CSR_GINTE 0x00000008 -#define TX4939_VPC_CSR_RSTD 0x00000004 -#define TX4939_VPC_CSR_RSTVPC 0x00000002 - -#define TX4939_VPC_CTRLA_VDPSN 0x00000200 -#define TX4939_VPC_CTRLA_PBUSY 0x00000100 -#define TX4939_VPC_CTRLA_DCINT 0x00000080 -#define TX4939_VPC_CTRLA_UOINT 0x00000040 -#define TX4939_VPC_CTRLA_PDINT_MASK 0x00000030 -#define TX4939_VPC_CTRLA_PDINT_ALL 0x00000000 -#define TX4939_VPC_CTRLA_PDINT_NEXT 0x00000010 -#define TX4939_VPC_CTRLA_PDINT_NONE 0x00000030 -#define TX4939_VPC_CTRLA_VDVLDP 0x00000008 -#define TX4939_VPC_CTRLA_VDMODE 0x00000004 -#define TX4939_VPC_CTRLA_VDFOR 0x00000002 -#define TX4939_VPC_CTRLA_ENVPC 0x00000001 - -/* bits for tx4939_vpc_desc.ctrl1 */ -#define TX4939_VPC_DESC_CTRL1_ERR_MASK 0x00000006 -#define TX4939_VPC_DESC_CTRL1_OWN 0x00000001 - -#define tx4939_ddrcptr ((struct tx4939_ddrc_reg __iomem *)TX4939_DDRC_REG) -#define tx4939_ebuscptr tx4938_ebuscptr -#define tx4939_ircptr \ - ((struct tx4939_irc_reg __iomem *)TX4939_IRC_REG) -#define tx4939_pcicptr tx4938_pcicptr -#define tx4939_pcic1ptr tx4938_pcic1ptr -#define tx4939_ccfgptr \ - ((struct tx4939_ccfg_reg __iomem *)TX4939_CCFG_REG) -#define tx4939_sramcptr tx4938_sramcptr -#define tx4939_rtcptr \ - ((struct tx4939_rtc_reg __iomem *)TX4939_RTC_REG) -#define tx4939_cryptoptr \ - ((struct tx4939_crypto_reg __iomem *)TX4939_CRYPTO_REG) -#define tx4939_vpcptr ((struct tx4939_vpc_reg __iomem *)TX4939_VPC_REG) - -#define TX4939_REV_MAJ_MIN() \ - ((__u32)__raw_readq(&tx4939_ccfgptr->crir) & 0x00ff) -#define TX4939_REV_PCODE() \ - ((__u32)__raw_readq(&tx4939_ccfgptr->crir) >> 16) -#define TX4939_CCFG_BCFG() \ - ((__u32)((__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_BCFG_MASK) \ - >> 32)) - -#define tx4939_ccfg_clear(bits) tx4938_ccfg_clear(bits) -#define tx4939_ccfg_set(bits) tx4938_ccfg_set(bits) -#define tx4939_ccfg_change(change, new) tx4938_ccfg_change(change, new) - -#define TX4939_EBUSC_CR(ch) TX4927_EBUSC_CR(ch) -#define TX4939_EBUSC_BA(ch) TX4927_EBUSC_BA(ch) -#define TX4939_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch) -#define TX4939_EBUSC_WIDTH(ch) \ - (16 >> ((__u32)(TX4939_EBUSC_CR(ch) >> 20) & 0x1)) - -/* SCLK0 = MSTCLK * 429/19 * 16/245 / 2 (14.745MHz for MST 20MHz) */ -#define TX4939_SCLK0(mst) \ - ((((mst) + 245/2) / 245UL * 429 * 16 + 19) / 19 / 2) - -void tx4939_wdt_init(void); -void tx4939_add_memory_regions(void); -void tx4939_setup(void); -void tx4939_time_init(unsigned int tmrnr); -void tx4939_sio_init(unsigned int sclk, unsigned int cts_mask); -void tx4939_spi_init(int busid); -void tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1); -int tx4939_report_pciclk(void); -void tx4939_report_pci1clk(void); -struct pci_dev; -int tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot); -int tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -void tx4939_setup_pcierr_irq(void); -void tx4939_irq_init(void); -int tx4939_irq(void); -void tx4939_mtd_init(int ch); - -#endif /* __ASM_TXX9_TX4939_H */ diff --git a/include/asm-mips/txx9irq.h b/include/asm-mips/txx9irq.h deleted file mode 100644 index 5620879be37f..000000000000 --- a/include/asm-mips/txx9irq.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * include/asm-mips/txx9irq.h - * TX39/TX49 interrupt controller definitions. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_TXX9IRQ_H -#define __ASM_TXX9IRQ_H - -#include - -#ifdef CONFIG_IRQ_CPU -#define TXX9_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) -#else -#ifdef CONFIG_I8259 -#define TXX9_IRQ_BASE (I8259A_IRQ_BASE + 16) -#else -#define TXX9_IRQ_BASE 0 -#endif -#endif - -#ifdef CONFIG_CPU_TX39XX -#define TXx9_MAX_IR 16 -#else -#define TXx9_MAX_IR 32 -#endif - -void txx9_irq_init(unsigned long baseaddr); -int txx9_irq(void); -int txx9_irq_set_pri(int irc_irq, int new_pri); - -#endif /* __ASM_TXX9IRQ_H */ diff --git a/include/asm-mips/txx9pio.h b/include/asm-mips/txx9pio.h deleted file mode 100644 index 3d6fa9f8d513..000000000000 --- a/include/asm-mips/txx9pio.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * include/asm-mips/txx9pio.h - * TX39/TX49 PIO controller definitions. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_TXX9PIO_H -#define __ASM_TXX9PIO_H - -#include - -struct txx9_pio_reg { - __u32 dout; - __u32 din; - __u32 dir; - __u32 od; - __u32 flag[2]; - __u32 pol; - __u32 intc; - __u32 maskcpu; - __u32 maskext; -}; - -int txx9_gpio_init(unsigned long baseaddr, - unsigned int base, unsigned int num); - -#endif /* __ASM_TXX9PIO_H */ diff --git a/include/asm-mips/txx9tmr.h b/include/asm-mips/txx9tmr.h deleted file mode 100644 index 67f70a8f09bd..000000000000 --- a/include/asm-mips/txx9tmr.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * include/asm-mips/txx9tmr.h - * TX39/TX49 timer controller definitions. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_TXX9TMR_H -#define __ASM_TXX9TMR_H - -#include - -struct txx9_tmr_reg { - u32 tcr; - u32 tisr; - u32 cpra; - u32 cprb; - u32 itmr; - u32 unused0[3]; - u32 ccdr; - u32 unused1[3]; - u32 pgmr; - u32 unused2[3]; - u32 wtmr; - u32 unused3[43]; - u32 trr; -}; - -/* TMTCR : Timer Control */ -#define TXx9_TMTCR_TCE 0x00000080 -#define TXx9_TMTCR_CCDE 0x00000040 -#define TXx9_TMTCR_CRE 0x00000020 -#define TXx9_TMTCR_ECES 0x00000008 -#define TXx9_TMTCR_CCS 0x00000004 -#define TXx9_TMTCR_TMODE_MASK 0x00000003 -#define TXx9_TMTCR_TMODE_ITVL 0x00000000 -#define TXx9_TMTCR_TMODE_PGEN 0x00000001 -#define TXx9_TMTCR_TMODE_WDOG 0x00000002 - -/* TMTISR : Timer Int. Status */ -#define TXx9_TMTISR_TPIBS 0x00000004 -#define TXx9_TMTISR_TPIAS 0x00000002 -#define TXx9_TMTISR_TIIS 0x00000001 - -/* TMITMR : Interval Timer Mode */ -#define TXx9_TMITMR_TIIE 0x00008000 -#define TXx9_TMITMR_TZCE 0x00000001 - -/* TMWTMR : Watchdog Timer Mode */ -#define TXx9_TMWTMR_TWIE 0x00008000 -#define TXx9_TMWTMR_WDIS 0x00000080 -#define TXx9_TMWTMR_TWC 0x00000001 - -void txx9_clocksource_init(unsigned long baseaddr, - unsigned int imbusclk); -void txx9_clockevent_init(unsigned long baseaddr, int irq, - unsigned int imbusclk); -void txx9_tmr_init(unsigned long baseaddr); - -#ifdef CONFIG_CPU_TX39XX -#define TXX9_TIMER_BITS 24 -#else -#define TXX9_TIMER_BITS 32 -#endif - -#endif /* __ASM_TXX9TMR_H */ diff --git a/include/asm-mips/types.h b/include/asm-mips/types.h deleted file mode 100644 index bcbb8d675af5..000000000000 --- a/include/asm-mips/types.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_TYPES_H -#define _ASM_TYPES_H - -#if _MIPS_SZLONG == 64 -# include -#else -# include -#endif - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG _MIPS_SZLONG - -#ifndef __ASSEMBLY__ - -#if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \ - || defined(CONFIG_64BIT) -typedef u64 dma_addr_t; -#else -typedef u32 dma_addr_t; -#endif -typedef u64 dma64_addr_t; - -/* - * Don't use phys_t. You've been warned. - */ -#ifdef CONFIG_64BIT_PHYS_ADDR -typedef unsigned long long phys_t; -#else -typedef unsigned long phys_t; -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_TYPES_H */ diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h deleted file mode 100644 index b895144d577a..000000000000 --- a/include/asm-mips/uaccess.h +++ /dev/null @@ -1,852 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1996, 1997, 1998, 1999, 2000, 03, 04 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - * Copyright (C) 2007 Maciej W. Rozycki - */ -#ifndef _ASM_UACCESS_H -#define _ASM_UACCESS_H - -#include -#include -#include -#include - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - */ -#ifdef CONFIG_32BIT - -#define __UA_LIMIT 0x80000000UL - -#define __UA_ADDR ".word" -#define __UA_LA "la" -#define __UA_ADDU "addu" -#define __UA_t0 "$8" -#define __UA_t1 "$9" - -#endif /* CONFIG_32BIT */ - -#ifdef CONFIG_64BIT - -#define __UA_LIMIT (- TASK_SIZE) - -#define __UA_ADDR ".dword" -#define __UA_LA "dla" -#define __UA_ADDU "daddu" -#define __UA_t0 "$12" -#define __UA_t1 "$13" - -#endif /* CONFIG_64BIT */ - -/* - * USER_DS is a bitmask that has the bits set that may not be set in a valid - * userspace address. Note that we limit 32-bit userspace to 0x7fff8000 but - * the arithmetic we're doing only works if the limit is a power of two, so - * we use 0x80000000 here on 32-bit kernels. If a process passes an invalid - * address in this range it's the process's problem, not ours :-) - */ - -#define KERNEL_DS ((mm_segment_t) { 0UL }) -#define USER_DS ((mm_segment_t) { __UA_LIMIT }) - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -#define segment_eq(a, b) ((a).seg == (b).seg) - - -/* - * Is a address valid? This does a straighforward calculation rather - * than tests. - * - * Address valid if: - * - "addr" doesn't have any high-bits set - * - AND "size" doesn't have any high-bits set - * - AND "addr+size" doesn't have any high-bits set - * - OR we are in kernel mode. - * - * __ua_size() is a trick to avoid runtime checking of positive constant - * sizes; for those we already know at compile time that the size is ok. - */ -#define __ua_size(size) \ - ((__builtin_constant_p(size) && (signed long) (size) > 0) ? 0 : (size)) - -/* - * access_ok: - Checks if a user space pointer is valid - * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that - * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe - * to write to a block, it is always safe to read from it. - * @addr: User space pointer to start of block to check - * @size: Size of block to check - * - * Context: User context only. This function may sleep. - * - * Checks if a pointer to a block of memory in user space is valid. - * - * Returns true (nonzero) if the memory block may be valid, false (zero) - * if it is definitely invalid. - * - * Note that, depending on architecture, this function probably just - * checks that the pointer is in the user space range - after calling - * this function, memory access functions may still return -EFAULT. - */ - -#define __access_mask get_fs().seg - -#define __access_ok(addr, size, mask) \ - (((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0) - -#define access_ok(type, addr, size) \ - likely(__access_ok((unsigned long)(addr), (size), __access_mask)) - -/* - * put_user: - Write a simple value into user space. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Returns zero on success, or -EFAULT on error. - */ -#define put_user(x,ptr) \ - __put_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * get_user: - Get a simple variable from user space. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - */ -#define get_user(x,ptr) \ - __get_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * __put_user: - Write a simple value into user space, with less checking. - * @x: Value to copy to user space. - * @ptr: Destination address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple value from kernel space to user - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and @x must be assignable - * to the result of dereferencing @ptr. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - */ -#define __put_user(x,ptr) \ - __put_user_nocheck((x), (ptr), sizeof(*(ptr))) - -/* - * __get_user: - Get a simple variable from user space, with less checking. - * @x: Variable to store result. - * @ptr: Source address, in user space. - * - * Context: User context only. This function may sleep. - * - * This macro copies a single simple variable from user space to kernel - * space. It supports simple types like char and int, but not larger - * data types like structures or arrays. - * - * @ptr must have pointer-to-simple-variable type, and the result of - * dereferencing @ptr must be assignable to @x without a cast. - * - * Caller must check the pointer with access_ok() before calling this - * function. - * - * Returns zero on success, or -EFAULT on error. - * On error, the variable @x is set to zero. - */ -#define __get_user(x,ptr) \ - __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct __user *)(x)) - -/* - * Yuck. We need two variants, one for 64bit operation and one - * for 32 bit mode and old iron. - */ -#ifdef CONFIG_32BIT -#define __GET_USER_DW(val, ptr) __get_user_asm_ll32(val, ptr) -#endif -#ifdef CONFIG_64BIT -#define __GET_USER_DW(val, ptr) __get_user_asm(val, "ld", ptr) -#endif - -extern void __get_user_unknown(void); - -#define __get_user_common(val, size, ptr) \ -do { \ - switch (size) { \ - case 1: __get_user_asm(val, "lb", ptr); break; \ - case 2: __get_user_asm(val, "lh", ptr); break; \ - case 4: __get_user_asm(val, "lw", ptr); break; \ - case 8: __GET_USER_DW(val, ptr); break; \ - default: __get_user_unknown(); break; \ - } \ -} while (0) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - int __gu_err; \ - \ - __get_user_common((x), size, ptr); \ - __gu_err; \ -}) - -#define __get_user_check(x, ptr, size) \ -({ \ - int __gu_err = -EFAULT; \ - const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \ - \ - if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \ - __get_user_common((x), size, __gu_ptr); \ - \ - __gu_err; \ -}) - -#define __get_user_asm(val, insn, addr) \ -{ \ - long __gu_tmp; \ - \ - __asm__ __volatile__( \ - "1: " insn " %1, %3 \n" \ - "2: \n" \ - " .section .fixup,\"ax\" \n" \ - "3: li %0, %4 \n" \ - " j 2b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " "__UA_ADDR "\t1b, 3b \n" \ - " .previous \n" \ - : "=r" (__gu_err), "=r" (__gu_tmp) \ - : "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \ - \ - (val) = (__typeof__(*(addr))) __gu_tmp; \ -} - -/* - * Get a long long 64 using 32 bit registers. - */ -#define __get_user_asm_ll32(val, addr) \ -{ \ - union { \ - unsigned long long l; \ - __typeof__(*(addr)) t; \ - } __gu_tmp; \ - \ - __asm__ __volatile__( \ - "1: lw %1, (%3) \n" \ - "2: lw %D1, 4(%3) \n" \ - "3: .section .fixup,\"ax\" \n" \ - "4: li %0, %4 \n" \ - " move %1, $0 \n" \ - " move %D1, $0 \n" \ - " j 3b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " " __UA_ADDR " 1b, 4b \n" \ - " " __UA_ADDR " 2b, 4b \n" \ - " .previous \n" \ - : "=r" (__gu_err), "=&r" (__gu_tmp.l) \ - : "0" (0), "r" (addr), "i" (-EFAULT)); \ - \ - (val) = __gu_tmp.t; \ -} - -/* - * Yuck. We need two variants, one for 64bit operation and one - * for 32 bit mode and old iron. - */ -#ifdef CONFIG_32BIT -#define __PUT_USER_DW(ptr) __put_user_asm_ll32(ptr) -#endif -#ifdef CONFIG_64BIT -#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr) -#endif - -#define __put_user_nocheck(x, ptr, size) \ -({ \ - __typeof__(*(ptr)) __pu_val; \ - int __pu_err = 0; \ - \ - __pu_val = (x); \ - switch (size) { \ - case 1: __put_user_asm("sb", ptr); break; \ - case 2: __put_user_asm("sh", ptr); break; \ - case 4: __put_user_asm("sw", ptr); break; \ - case 8: __PUT_USER_DW(ptr); break; \ - default: __put_user_unknown(); break; \ - } \ - __pu_err; \ -}) - -#define __put_user_check(x, ptr, size) \ -({ \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - __typeof__(*(ptr)) __pu_val = (x); \ - int __pu_err = -EFAULT; \ - \ - if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \ - switch (size) { \ - case 1: __put_user_asm("sb", __pu_addr); break; \ - case 2: __put_user_asm("sh", __pu_addr); break; \ - case 4: __put_user_asm("sw", __pu_addr); break; \ - case 8: __PUT_USER_DW(__pu_addr); break; \ - default: __put_user_unknown(); break; \ - } \ - } \ - __pu_err; \ -}) - -#define __put_user_asm(insn, ptr) \ -{ \ - __asm__ __volatile__( \ - "1: " insn " %z2, %3 # __put_user_asm\n" \ - "2: \n" \ - " .section .fixup,\"ax\" \n" \ - "3: li %0, %4 \n" \ - " j 2b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " " __UA_ADDR " 1b, 3b \n" \ - " .previous \n" \ - : "=r" (__pu_err) \ - : "0" (0), "Jr" (__pu_val), "o" (__m(ptr)), \ - "i" (-EFAULT)); \ -} - -#define __put_user_asm_ll32(ptr) \ -{ \ - __asm__ __volatile__( \ - "1: sw %2, (%3) # __put_user_asm_ll32 \n" \ - "2: sw %D2, 4(%3) \n" \ - "3: \n" \ - " .section .fixup,\"ax\" \n" \ - "4: li %0, %4 \n" \ - " j 3b \n" \ - " .previous \n" \ - " .section __ex_table,\"a\" \n" \ - " " __UA_ADDR " 1b, 4b \n" \ - " " __UA_ADDR " 2b, 4b \n" \ - " .previous" \ - : "=r" (__pu_err) \ - : "0" (0), "r" (__pu_val), "r" (ptr), \ - "i" (-EFAULT)); \ -} - -extern void __put_user_unknown(void); - -/* - * We're generating jump to subroutines which will be outside the range of - * jump instructions - */ -#ifdef MODULE -#define __MODULE_JAL(destination) \ - ".set\tnoat\n\t" \ - __UA_LA "\t$1, " #destination "\n\t" \ - "jalr\t$1\n\t" \ - ".set\tat\n\t" -#else -#define __MODULE_JAL(destination) \ - "jal\t" #destination "\n\t" -#endif - -#ifndef CONFIG_CPU_DADDI_WORKAROUNDS -#define DADDI_SCRATCH "$0" -#else -#define DADDI_SCRATCH "$3" -#endif - -extern size_t __copy_user(void *__to, const void *__from, size_t __n); - -#define __invoke_copy_to_user(to, from, n) \ -({ \ - register void __user *__cu_to_r __asm__("$4"); \ - register const void *__cu_from_r __asm__("$5"); \ - register long __cu_len_r __asm__("$6"); \ - \ - __cu_to_r = (to); \ - __cu_from_r = (from); \ - __cu_len_r = (n); \ - __asm__ __volatile__( \ - __MODULE_JAL(__copy_user) \ - : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ - : \ - : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ - DADDI_SCRATCH, "memory"); \ - __cu_len_r; \ -}) - -/* - * __copy_to_user: - Copy a block of data into user space, with less checking. - * @to: Destination address, in user space. - * @from: Source address, in kernel space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from kernel space to user space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - */ -#define __copy_to_user(to, from, n) \ -({ \ - void __user *__cu_to; \ - const void *__cu_from; \ - long __cu_len; \ - \ - might_sleep(); \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ - __cu_len; \ -}) - -extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); - -#define __copy_to_user_inatomic(to, from, n) \ -({ \ - void __user *__cu_to; \ - const void *__cu_from; \ - long __cu_len; \ - \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ - __cu_len; \ -}) - -#define __copy_from_user_inatomic(to, from, n) \ -({ \ - void *__cu_to; \ - const void __user *__cu_from; \ - long __cu_len; \ - \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - __cu_len = __invoke_copy_from_user_inatomic(__cu_to, __cu_from, \ - __cu_len); \ - __cu_len; \ -}) - -/* - * copy_to_user: - Copy a block of data into user space. - * @to: Destination address, in user space. - * @from: Source address, in kernel space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from kernel space to user space. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - */ -#define copy_to_user(to, from, n) \ -({ \ - void __user *__cu_to; \ - const void *__cu_from; \ - long __cu_len; \ - \ - might_sleep(); \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) \ - __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, \ - __cu_len); \ - __cu_len; \ -}) - -#define __invoke_copy_from_user(to, from, n) \ -({ \ - register void *__cu_to_r __asm__("$4"); \ - register const void __user *__cu_from_r __asm__("$5"); \ - register long __cu_len_r __asm__("$6"); \ - \ - __cu_to_r = (to); \ - __cu_from_r = (from); \ - __cu_len_r = (n); \ - __asm__ __volatile__( \ - ".set\tnoreorder\n\t" \ - __MODULE_JAL(__copy_user) \ - ".set\tnoat\n\t" \ - __UA_ADDU "\t$1, %1, %2\n\t" \ - ".set\tat\n\t" \ - ".set\treorder" \ - : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ - : \ - : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ - DADDI_SCRATCH, "memory"); \ - __cu_len_r; \ -}) - -#define __invoke_copy_from_user_inatomic(to, from, n) \ -({ \ - register void *__cu_to_r __asm__("$4"); \ - register const void __user *__cu_from_r __asm__("$5"); \ - register long __cu_len_r __asm__("$6"); \ - \ - __cu_to_r = (to); \ - __cu_from_r = (from); \ - __cu_len_r = (n); \ - __asm__ __volatile__( \ - ".set\tnoreorder\n\t" \ - __MODULE_JAL(__copy_user_inatomic) \ - ".set\tnoat\n\t" \ - __UA_ADDU "\t$1, %1, %2\n\t" \ - ".set\tat\n\t" \ - ".set\treorder" \ - : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \ - : \ - : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \ - DADDI_SCRATCH, "memory"); \ - __cu_len_r; \ -}) - -/* - * __copy_from_user: - Copy a block of data from user space, with less checking. - * @to: Destination address, in kernel space. - * @from: Source address, in user space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from user space to kernel space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - * - * If some data could not be copied, this function will pad the copied - * data to the requested size using zero bytes. - */ -#define __copy_from_user(to, from, n) \ -({ \ - void *__cu_to; \ - const void __user *__cu_from; \ - long __cu_len; \ - \ - might_sleep(); \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ - __cu_len); \ - __cu_len; \ -}) - -/* - * copy_from_user: - Copy a block of data from user space. - * @to: Destination address, in kernel space. - * @from: Source address, in user space. - * @n: Number of bytes to copy. - * - * Context: User context only. This function may sleep. - * - * Copy data from user space to kernel space. - * - * Returns number of bytes that could not be copied. - * On success, this will be zero. - * - * If some data could not be copied, this function will pad the copied - * data to the requested size using zero bytes. - */ -#define copy_from_user(to, from, n) \ -({ \ - void *__cu_to; \ - const void __user *__cu_from; \ - long __cu_len; \ - \ - might_sleep(); \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - if (access_ok(VERIFY_READ, __cu_from, __cu_len)) \ - __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ - __cu_len); \ - __cu_len; \ -}) - -#define __copy_in_user(to, from, n) __copy_from_user(to, from, n) - -#define copy_in_user(to, from, n) \ -({ \ - void __user *__cu_to; \ - const void __user *__cu_from; \ - long __cu_len; \ - \ - might_sleep(); \ - __cu_to = (to); \ - __cu_from = (from); \ - __cu_len = (n); \ - if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) && \ - access_ok(VERIFY_WRITE, __cu_to, __cu_len))) \ - __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ - __cu_len); \ - __cu_len; \ -}) - -/* - * __clear_user: - Zero a block of memory in user space, with less checking. - * @to: Destination address, in user space. - * @n: Number of bytes to zero. - * - * Zero a block of memory in user space. Caller must check - * the specified block with access_ok() before calling this function. - * - * Returns number of bytes that could not be cleared. - * On success, this will be zero. - */ -static inline __kernel_size_t -__clear_user(void __user *addr, __kernel_size_t size) -{ - __kernel_size_t res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - "move\t$5, $0\n\t" - "move\t$6, %2\n\t" - __MODULE_JAL(__bzero) - "move\t%0, $6" - : "=r" (res) - : "r" (addr), "r" (size) - : "$4", "$5", "$6", __UA_t0, __UA_t1, "$31"); - - return res; -} - -#define clear_user(addr,n) \ -({ \ - void __user * __cl_addr = (addr); \ - unsigned long __cl_size = (n); \ - if (__cl_size && access_ok(VERIFY_WRITE, \ - ((unsigned long)(__cl_addr)), __cl_size)) \ - __cl_size = __clear_user(__cl_addr, __cl_size); \ - __cl_size; \ -}) - -/* - * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * Caller must check the specified block with access_ok() before calling - * this function. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -static inline long -__strncpy_from_user(char *__to, const char __user *__from, long __len) -{ - long res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - "move\t$5, %2\n\t" - "move\t$6, %3\n\t" - __MODULE_JAL(__strncpy_from_user_nocheck_asm) - "move\t%0, $2" - : "=r" (res) - : "r" (__to), "r" (__from), "r" (__len) - : "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory"); - - return res; -} - -/* - * strncpy_from_user: - Copy a NUL terminated string from userspace. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -static inline long -strncpy_from_user(char *__to, const char __user *__from, long __len) -{ - long res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - "move\t$5, %2\n\t" - "move\t$6, %3\n\t" - __MODULE_JAL(__strncpy_from_user_asm) - "move\t%0, $2" - : "=r" (res) - : "r" (__to), "r" (__from), "r" (__len) - : "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory"); - - return res; -} - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -static inline long __strlen_user(const char __user *s) -{ - long res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - __MODULE_JAL(__strlen_user_nocheck_asm) - "move\t%0, $2" - : "=r" (res) - : "r" (s) - : "$2", "$4", __UA_t0, "$31"); - - return res; -} - -/* - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -static inline long strlen_user(const char __user *s) -{ - long res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - __MODULE_JAL(__strlen_user_asm) - "move\t%0, $2" - : "=r" (res) - : "r" (s) - : "$2", "$4", __UA_t0, "$31"); - - return res; -} - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -static inline long __strnlen_user(const char __user *s, long n) -{ - long res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - "move\t$5, %2\n\t" - __MODULE_JAL(__strnlen_user_nocheck_asm) - "move\t%0, $2" - : "=r" (res) - : "r" (s), "r" (n) - : "$2", "$4", "$5", __UA_t0, "$31"); - - return res; -} - -/* - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -static inline long strnlen_user(const char __user *s, long n) -{ - long res; - - might_sleep(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - "move\t$5, %2\n\t" - __MODULE_JAL(__strnlen_user_asm) - "move\t%0, $2" - : "=r" (res) - : "r" (s), "r" (n) - : "$2", "$4", "$5", __UA_t0, "$31"); - - return res; -} - -struct exception_table_entry -{ - unsigned long insn; - unsigned long nextinsn; -}; - -extern int fixup_exception(struct pt_regs *regs); - -#endif /* _ASM_UACCESS_H */ diff --git a/include/asm-mips/ucontext.h b/include/asm-mips/ucontext.h deleted file mode 100644 index 8a4b20e88b81..000000000000 --- a/include/asm-mips/ucontext.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Low level exception handling - * - * Copyright (C) 1998, 1999 by Ralf Baechle - */ -#ifndef _ASM_UCONTEXT_H -#define _ASM_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* _ASM_UCONTEXT_H */ diff --git a/include/asm-mips/unaligned.h b/include/asm-mips/unaligned.h deleted file mode 100644 index 792404948571..000000000000 --- a/include/asm-mips/unaligned.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef _ASM_MIPS_UNALIGNED_H -#define _ASM_MIPS_UNALIGNED_H - -#include -#if defined(__MIPSEB__) -# include -# include -# include -# define get_unaligned __get_unaligned_be -# define put_unaligned __put_unaligned_be -#elif defined(__MIPSEL__) -# include -# include -# include -# define get_unaligned __get_unaligned_le -# define put_unaligned __put_unaligned_le -#else -# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???" -#endif - -#endif /* _ASM_MIPS_UNALIGNED_H */ diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h deleted file mode 100644 index a73e1531e151..000000000000 --- a/include/asm-mips/unistd.h +++ /dev/null @@ -1,1037 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 96, 97, 98, 99, 2000 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - * - * Changed system calls macros _syscall5 - _syscall7 to push args 5 to 7 onto - * the stack. Robin Farine for ACN S.A, Copyright (C) 1996 by ACN S.A - */ -#ifndef _ASM_UNISTD_H -#define _ASM_UNISTD_H - -#include - -#if _MIPS_SIM == _MIPS_SIM_ABI32 - -/* - * Linux o32 style syscalls are in the range from 4000 to 4999. - */ -#define __NR_Linux 4000 -#define __NR_syscall (__NR_Linux + 0) -#define __NR_exit (__NR_Linux + 1) -#define __NR_fork (__NR_Linux + 2) -#define __NR_read (__NR_Linux + 3) -#define __NR_write (__NR_Linux + 4) -#define __NR_open (__NR_Linux + 5) -#define __NR_close (__NR_Linux + 6) -#define __NR_waitpid (__NR_Linux + 7) -#define __NR_creat (__NR_Linux + 8) -#define __NR_link (__NR_Linux + 9) -#define __NR_unlink (__NR_Linux + 10) -#define __NR_execve (__NR_Linux + 11) -#define __NR_chdir (__NR_Linux + 12) -#define __NR_time (__NR_Linux + 13) -#define __NR_mknod (__NR_Linux + 14) -#define __NR_chmod (__NR_Linux + 15) -#define __NR_lchown (__NR_Linux + 16) -#define __NR_break (__NR_Linux + 17) -#define __NR_unused18 (__NR_Linux + 18) -#define __NR_lseek (__NR_Linux + 19) -#define __NR_getpid (__NR_Linux + 20) -#define __NR_mount (__NR_Linux + 21) -#define __NR_umount (__NR_Linux + 22) -#define __NR_setuid (__NR_Linux + 23) -#define __NR_getuid (__NR_Linux + 24) -#define __NR_stime (__NR_Linux + 25) -#define __NR_ptrace (__NR_Linux + 26) -#define __NR_alarm (__NR_Linux + 27) -#define __NR_unused28 (__NR_Linux + 28) -#define __NR_pause (__NR_Linux + 29) -#define __NR_utime (__NR_Linux + 30) -#define __NR_stty (__NR_Linux + 31) -#define __NR_gtty (__NR_Linux + 32) -#define __NR_access (__NR_Linux + 33) -#define __NR_nice (__NR_Linux + 34) -#define __NR_ftime (__NR_Linux + 35) -#define __NR_sync (__NR_Linux + 36) -#define __NR_kill (__NR_Linux + 37) -#define __NR_rename (__NR_Linux + 38) -#define __NR_mkdir (__NR_Linux + 39) -#define __NR_rmdir (__NR_Linux + 40) -#define __NR_dup (__NR_Linux + 41) -#define __NR_pipe (__NR_Linux + 42) -#define __NR_times (__NR_Linux + 43) -#define __NR_prof (__NR_Linux + 44) -#define __NR_brk (__NR_Linux + 45) -#define __NR_setgid (__NR_Linux + 46) -#define __NR_getgid (__NR_Linux + 47) -#define __NR_signal (__NR_Linux + 48) -#define __NR_geteuid (__NR_Linux + 49) -#define __NR_getegid (__NR_Linux + 50) -#define __NR_acct (__NR_Linux + 51) -#define __NR_umount2 (__NR_Linux + 52) -#define __NR_lock (__NR_Linux + 53) -#define __NR_ioctl (__NR_Linux + 54) -#define __NR_fcntl (__NR_Linux + 55) -#define __NR_mpx (__NR_Linux + 56) -#define __NR_setpgid (__NR_Linux + 57) -#define __NR_ulimit (__NR_Linux + 58) -#define __NR_unused59 (__NR_Linux + 59) -#define __NR_umask (__NR_Linux + 60) -#define __NR_chroot (__NR_Linux + 61) -#define __NR_ustat (__NR_Linux + 62) -#define __NR_dup2 (__NR_Linux + 63) -#define __NR_getppid (__NR_Linux + 64) -#define __NR_getpgrp (__NR_Linux + 65) -#define __NR_setsid (__NR_Linux + 66) -#define __NR_sigaction (__NR_Linux + 67) -#define __NR_sgetmask (__NR_Linux + 68) -#define __NR_ssetmask (__NR_Linux + 69) -#define __NR_setreuid (__NR_Linux + 70) -#define __NR_setregid (__NR_Linux + 71) -#define __NR_sigsuspend (__NR_Linux + 72) -#define __NR_sigpending (__NR_Linux + 73) -#define __NR_sethostname (__NR_Linux + 74) -#define __NR_setrlimit (__NR_Linux + 75) -#define __NR_getrlimit (__NR_Linux + 76) -#define __NR_getrusage (__NR_Linux + 77) -#define __NR_gettimeofday (__NR_Linux + 78) -#define __NR_settimeofday (__NR_Linux + 79) -#define __NR_getgroups (__NR_Linux + 80) -#define __NR_setgroups (__NR_Linux + 81) -#define __NR_reserved82 (__NR_Linux + 82) -#define __NR_symlink (__NR_Linux + 83) -#define __NR_unused84 (__NR_Linux + 84) -#define __NR_readlink (__NR_Linux + 85) -#define __NR_uselib (__NR_Linux + 86) -#define __NR_swapon (__NR_Linux + 87) -#define __NR_reboot (__NR_Linux + 88) -#define __NR_readdir (__NR_Linux + 89) -#define __NR_mmap (__NR_Linux + 90) -#define __NR_munmap (__NR_Linux + 91) -#define __NR_truncate (__NR_Linux + 92) -#define __NR_ftruncate (__NR_Linux + 93) -#define __NR_fchmod (__NR_Linux + 94) -#define __NR_fchown (__NR_Linux + 95) -#define __NR_getpriority (__NR_Linux + 96) -#define __NR_setpriority (__NR_Linux + 97) -#define __NR_profil (__NR_Linux + 98) -#define __NR_statfs (__NR_Linux + 99) -#define __NR_fstatfs (__NR_Linux + 100) -#define __NR_ioperm (__NR_Linux + 101) -#define __NR_socketcall (__NR_Linux + 102) -#define __NR_syslog (__NR_Linux + 103) -#define __NR_setitimer (__NR_Linux + 104) -#define __NR_getitimer (__NR_Linux + 105) -#define __NR_stat (__NR_Linux + 106) -#define __NR_lstat (__NR_Linux + 107) -#define __NR_fstat (__NR_Linux + 108) -#define __NR_unused109 (__NR_Linux + 109) -#define __NR_iopl (__NR_Linux + 110) -#define __NR_vhangup (__NR_Linux + 111) -#define __NR_idle (__NR_Linux + 112) -#define __NR_vm86 (__NR_Linux + 113) -#define __NR_wait4 (__NR_Linux + 114) -#define __NR_swapoff (__NR_Linux + 115) -#define __NR_sysinfo (__NR_Linux + 116) -#define __NR_ipc (__NR_Linux + 117) -#define __NR_fsync (__NR_Linux + 118) -#define __NR_sigreturn (__NR_Linux + 119) -#define __NR_clone (__NR_Linux + 120) -#define __NR_setdomainname (__NR_Linux + 121) -#define __NR_uname (__NR_Linux + 122) -#define __NR_modify_ldt (__NR_Linux + 123) -#define __NR_adjtimex (__NR_Linux + 124) -#define __NR_mprotect (__NR_Linux + 125) -#define __NR_sigprocmask (__NR_Linux + 126) -#define __NR_create_module (__NR_Linux + 127) -#define __NR_init_module (__NR_Linux + 128) -#define __NR_delete_module (__NR_Linux + 129) -#define __NR_get_kernel_syms (__NR_Linux + 130) -#define __NR_quotactl (__NR_Linux + 131) -#define __NR_getpgid (__NR_Linux + 132) -#define __NR_fchdir (__NR_Linux + 133) -#define __NR_bdflush (__NR_Linux + 134) -#define __NR_sysfs (__NR_Linux + 135) -#define __NR_personality (__NR_Linux + 136) -#define __NR_afs_syscall (__NR_Linux + 137) /* Syscall for Andrew File System */ -#define __NR_setfsuid (__NR_Linux + 138) -#define __NR_setfsgid (__NR_Linux + 139) -#define __NR__llseek (__NR_Linux + 140) -#define __NR_getdents (__NR_Linux + 141) -#define __NR__newselect (__NR_Linux + 142) -#define __NR_flock (__NR_Linux + 143) -#define __NR_msync (__NR_Linux + 144) -#define __NR_readv (__NR_Linux + 145) -#define __NR_writev (__NR_Linux + 146) -#define __NR_cacheflush (__NR_Linux + 147) -#define __NR_cachectl (__NR_Linux + 148) -#define __NR_sysmips (__NR_Linux + 149) -#define __NR_unused150 (__NR_Linux + 150) -#define __NR_getsid (__NR_Linux + 151) -#define __NR_fdatasync (__NR_Linux + 152) -#define __NR__sysctl (__NR_Linux + 153) -#define __NR_mlock (__NR_Linux + 154) -#define __NR_munlock (__NR_Linux + 155) -#define __NR_mlockall (__NR_Linux + 156) -#define __NR_munlockall (__NR_Linux + 157) -#define __NR_sched_setparam (__NR_Linux + 158) -#define __NR_sched_getparam (__NR_Linux + 159) -#define __NR_sched_setscheduler (__NR_Linux + 160) -#define __NR_sched_getscheduler (__NR_Linux + 161) -#define __NR_sched_yield (__NR_Linux + 162) -#define __NR_sched_get_priority_max (__NR_Linux + 163) -#define __NR_sched_get_priority_min (__NR_Linux + 164) -#define __NR_sched_rr_get_interval (__NR_Linux + 165) -#define __NR_nanosleep (__NR_Linux + 166) -#define __NR_mremap (__NR_Linux + 167) -#define __NR_accept (__NR_Linux + 168) -#define __NR_bind (__NR_Linux + 169) -#define __NR_connect (__NR_Linux + 170) -#define __NR_getpeername (__NR_Linux + 171) -#define __NR_getsockname (__NR_Linux + 172) -#define __NR_getsockopt (__NR_Linux + 173) -#define __NR_listen (__NR_Linux + 174) -#define __NR_recv (__NR_Linux + 175) -#define __NR_recvfrom (__NR_Linux + 176) -#define __NR_recvmsg (__NR_Linux + 177) -#define __NR_send (__NR_Linux + 178) -#define __NR_sendmsg (__NR_Linux + 179) -#define __NR_sendto (__NR_Linux + 180) -#define __NR_setsockopt (__NR_Linux + 181) -#define __NR_shutdown (__NR_Linux + 182) -#define __NR_socket (__NR_Linux + 183) -#define __NR_socketpair (__NR_Linux + 184) -#define __NR_setresuid (__NR_Linux + 185) -#define __NR_getresuid (__NR_Linux + 186) -#define __NR_query_module (__NR_Linux + 187) -#define __NR_poll (__NR_Linux + 188) -#define __NR_nfsservctl (__NR_Linux + 189) -#define __NR_setresgid (__NR_Linux + 190) -#define __NR_getresgid (__NR_Linux + 191) -#define __NR_prctl (__NR_Linux + 192) -#define __NR_rt_sigreturn (__NR_Linux + 193) -#define __NR_rt_sigaction (__NR_Linux + 194) -#define __NR_rt_sigprocmask (__NR_Linux + 195) -#define __NR_rt_sigpending (__NR_Linux + 196) -#define __NR_rt_sigtimedwait (__NR_Linux + 197) -#define __NR_rt_sigqueueinfo (__NR_Linux + 198) -#define __NR_rt_sigsuspend (__NR_Linux + 199) -#define __NR_pread64 (__NR_Linux + 200) -#define __NR_pwrite64 (__NR_Linux + 201) -#define __NR_chown (__NR_Linux + 202) -#define __NR_getcwd (__NR_Linux + 203) -#define __NR_capget (__NR_Linux + 204) -#define __NR_capset (__NR_Linux + 205) -#define __NR_sigaltstack (__NR_Linux + 206) -#define __NR_sendfile (__NR_Linux + 207) -#define __NR_getpmsg (__NR_Linux + 208) -#define __NR_putpmsg (__NR_Linux + 209) -#define __NR_mmap2 (__NR_Linux + 210) -#define __NR_truncate64 (__NR_Linux + 211) -#define __NR_ftruncate64 (__NR_Linux + 212) -#define __NR_stat64 (__NR_Linux + 213) -#define __NR_lstat64 (__NR_Linux + 214) -#define __NR_fstat64 (__NR_Linux + 215) -#define __NR_pivot_root (__NR_Linux + 216) -#define __NR_mincore (__NR_Linux + 217) -#define __NR_madvise (__NR_Linux + 218) -#define __NR_getdents64 (__NR_Linux + 219) -#define __NR_fcntl64 (__NR_Linux + 220) -#define __NR_reserved221 (__NR_Linux + 221) -#define __NR_gettid (__NR_Linux + 222) -#define __NR_readahead (__NR_Linux + 223) -#define __NR_setxattr (__NR_Linux + 224) -#define __NR_lsetxattr (__NR_Linux + 225) -#define __NR_fsetxattr (__NR_Linux + 226) -#define __NR_getxattr (__NR_Linux + 227) -#define __NR_lgetxattr (__NR_Linux + 228) -#define __NR_fgetxattr (__NR_Linux + 229) -#define __NR_listxattr (__NR_Linux + 230) -#define __NR_llistxattr (__NR_Linux + 231) -#define __NR_flistxattr (__NR_Linux + 232) -#define __NR_removexattr (__NR_Linux + 233) -#define __NR_lremovexattr (__NR_Linux + 234) -#define __NR_fremovexattr (__NR_Linux + 235) -#define __NR_tkill (__NR_Linux + 236) -#define __NR_sendfile64 (__NR_Linux + 237) -#define __NR_futex (__NR_Linux + 238) -#define __NR_sched_setaffinity (__NR_Linux + 239) -#define __NR_sched_getaffinity (__NR_Linux + 240) -#define __NR_io_setup (__NR_Linux + 241) -#define __NR_io_destroy (__NR_Linux + 242) -#define __NR_io_getevents (__NR_Linux + 243) -#define __NR_io_submit (__NR_Linux + 244) -#define __NR_io_cancel (__NR_Linux + 245) -#define __NR_exit_group (__NR_Linux + 246) -#define __NR_lookup_dcookie (__NR_Linux + 247) -#define __NR_epoll_create (__NR_Linux + 248) -#define __NR_epoll_ctl (__NR_Linux + 249) -#define __NR_epoll_wait (__NR_Linux + 250) -#define __NR_remap_file_pages (__NR_Linux + 251) -#define __NR_set_tid_address (__NR_Linux + 252) -#define __NR_restart_syscall (__NR_Linux + 253) -#define __NR_fadvise64 (__NR_Linux + 254) -#define __NR_statfs64 (__NR_Linux + 255) -#define __NR_fstatfs64 (__NR_Linux + 256) -#define __NR_timer_create (__NR_Linux + 257) -#define __NR_timer_settime (__NR_Linux + 258) -#define __NR_timer_gettime (__NR_Linux + 259) -#define __NR_timer_getoverrun (__NR_Linux + 260) -#define __NR_timer_delete (__NR_Linux + 261) -#define __NR_clock_settime (__NR_Linux + 262) -#define __NR_clock_gettime (__NR_Linux + 263) -#define __NR_clock_getres (__NR_Linux + 264) -#define __NR_clock_nanosleep (__NR_Linux + 265) -#define __NR_tgkill (__NR_Linux + 266) -#define __NR_utimes (__NR_Linux + 267) -#define __NR_mbind (__NR_Linux + 268) -#define __NR_get_mempolicy (__NR_Linux + 269) -#define __NR_set_mempolicy (__NR_Linux + 270) -#define __NR_mq_open (__NR_Linux + 271) -#define __NR_mq_unlink (__NR_Linux + 272) -#define __NR_mq_timedsend (__NR_Linux + 273) -#define __NR_mq_timedreceive (__NR_Linux + 274) -#define __NR_mq_notify (__NR_Linux + 275) -#define __NR_mq_getsetattr (__NR_Linux + 276) -#define __NR_vserver (__NR_Linux + 277) -#define __NR_waitid (__NR_Linux + 278) -/* #define __NR_sys_setaltroot (__NR_Linux + 279) */ -#define __NR_add_key (__NR_Linux + 280) -#define __NR_request_key (__NR_Linux + 281) -#define __NR_keyctl (__NR_Linux + 282) -#define __NR_set_thread_area (__NR_Linux + 283) -#define __NR_inotify_init (__NR_Linux + 284) -#define __NR_inotify_add_watch (__NR_Linux + 285) -#define __NR_inotify_rm_watch (__NR_Linux + 286) -#define __NR_migrate_pages (__NR_Linux + 287) -#define __NR_openat (__NR_Linux + 288) -#define __NR_mkdirat (__NR_Linux + 289) -#define __NR_mknodat (__NR_Linux + 290) -#define __NR_fchownat (__NR_Linux + 291) -#define __NR_futimesat (__NR_Linux + 292) -#define __NR_fstatat64 (__NR_Linux + 293) -#define __NR_unlinkat (__NR_Linux + 294) -#define __NR_renameat (__NR_Linux + 295) -#define __NR_linkat (__NR_Linux + 296) -#define __NR_symlinkat (__NR_Linux + 297) -#define __NR_readlinkat (__NR_Linux + 298) -#define __NR_fchmodat (__NR_Linux + 299) -#define __NR_faccessat (__NR_Linux + 300) -#define __NR_pselect6 (__NR_Linux + 301) -#define __NR_ppoll (__NR_Linux + 302) -#define __NR_unshare (__NR_Linux + 303) -#define __NR_splice (__NR_Linux + 304) -#define __NR_sync_file_range (__NR_Linux + 305) -#define __NR_tee (__NR_Linux + 306) -#define __NR_vmsplice (__NR_Linux + 307) -#define __NR_move_pages (__NR_Linux + 308) -#define __NR_set_robust_list (__NR_Linux + 309) -#define __NR_get_robust_list (__NR_Linux + 310) -#define __NR_kexec_load (__NR_Linux + 311) -#define __NR_getcpu (__NR_Linux + 312) -#define __NR_epoll_pwait (__NR_Linux + 313) -#define __NR_ioprio_set (__NR_Linux + 314) -#define __NR_ioprio_get (__NR_Linux + 315) -#define __NR_utimensat (__NR_Linux + 316) -#define __NR_signalfd (__NR_Linux + 317) -#define __NR_timerfd (__NR_Linux + 318) -#define __NR_eventfd (__NR_Linux + 319) -#define __NR_fallocate (__NR_Linux + 320) -#define __NR_timerfd_create (__NR_Linux + 321) -#define __NR_timerfd_gettime (__NR_Linux + 322) -#define __NR_timerfd_settime (__NR_Linux + 323) -#define __NR_signalfd4 (__NR_Linux + 324) -#define __NR_eventfd2 (__NR_Linux + 325) -#define __NR_epoll_create1 (__NR_Linux + 326) -#define __NR_dup3 (__NR_Linux + 327) -#define __NR_pipe2 (__NR_Linux + 328) -#define __NR_inotify_init1 (__NR_Linux + 329) - -/* - * Offset of the last Linux o32 flavoured syscall - */ -#define __NR_Linux_syscalls 329 - -#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ - -#define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 329 - -#if _MIPS_SIM == _MIPS_SIM_ABI64 - -/* - * Linux 64-bit syscalls are in the range from 5000 to 5999. - */ -#define __NR_Linux 5000 -#define __NR_read (__NR_Linux + 0) -#define __NR_write (__NR_Linux + 1) -#define __NR_open (__NR_Linux + 2) -#define __NR_close (__NR_Linux + 3) -#define __NR_stat (__NR_Linux + 4) -#define __NR_fstat (__NR_Linux + 5) -#define __NR_lstat (__NR_Linux + 6) -#define __NR_poll (__NR_Linux + 7) -#define __NR_lseek (__NR_Linux + 8) -#define __NR_mmap (__NR_Linux + 9) -#define __NR_mprotect (__NR_Linux + 10) -#define __NR_munmap (__NR_Linux + 11) -#define __NR_brk (__NR_Linux + 12) -#define __NR_rt_sigaction (__NR_Linux + 13) -#define __NR_rt_sigprocmask (__NR_Linux + 14) -#define __NR_ioctl (__NR_Linux + 15) -#define __NR_pread64 (__NR_Linux + 16) -#define __NR_pwrite64 (__NR_Linux + 17) -#define __NR_readv (__NR_Linux + 18) -#define __NR_writev (__NR_Linux + 19) -#define __NR_access (__NR_Linux + 20) -#define __NR_pipe (__NR_Linux + 21) -#define __NR__newselect (__NR_Linux + 22) -#define __NR_sched_yield (__NR_Linux + 23) -#define __NR_mremap (__NR_Linux + 24) -#define __NR_msync (__NR_Linux + 25) -#define __NR_mincore (__NR_Linux + 26) -#define __NR_madvise (__NR_Linux + 27) -#define __NR_shmget (__NR_Linux + 28) -#define __NR_shmat (__NR_Linux + 29) -#define __NR_shmctl (__NR_Linux + 30) -#define __NR_dup (__NR_Linux + 31) -#define __NR_dup2 (__NR_Linux + 32) -#define __NR_pause (__NR_Linux + 33) -#define __NR_nanosleep (__NR_Linux + 34) -#define __NR_getitimer (__NR_Linux + 35) -#define __NR_setitimer (__NR_Linux + 36) -#define __NR_alarm (__NR_Linux + 37) -#define __NR_getpid (__NR_Linux + 38) -#define __NR_sendfile (__NR_Linux + 39) -#define __NR_socket (__NR_Linux + 40) -#define __NR_connect (__NR_Linux + 41) -#define __NR_accept (__NR_Linux + 42) -#define __NR_sendto (__NR_Linux + 43) -#define __NR_recvfrom (__NR_Linux + 44) -#define __NR_sendmsg (__NR_Linux + 45) -#define __NR_recvmsg (__NR_Linux + 46) -#define __NR_shutdown (__NR_Linux + 47) -#define __NR_bind (__NR_Linux + 48) -#define __NR_listen (__NR_Linux + 49) -#define __NR_getsockname (__NR_Linux + 50) -#define __NR_getpeername (__NR_Linux + 51) -#define __NR_socketpair (__NR_Linux + 52) -#define __NR_setsockopt (__NR_Linux + 53) -#define __NR_getsockopt (__NR_Linux + 54) -#define __NR_clone (__NR_Linux + 55) -#define __NR_fork (__NR_Linux + 56) -#define __NR_execve (__NR_Linux + 57) -#define __NR_exit (__NR_Linux + 58) -#define __NR_wait4 (__NR_Linux + 59) -#define __NR_kill (__NR_Linux + 60) -#define __NR_uname (__NR_Linux + 61) -#define __NR_semget (__NR_Linux + 62) -#define __NR_semop (__NR_Linux + 63) -#define __NR_semctl (__NR_Linux + 64) -#define __NR_shmdt (__NR_Linux + 65) -#define __NR_msgget (__NR_Linux + 66) -#define __NR_msgsnd (__NR_Linux + 67) -#define __NR_msgrcv (__NR_Linux + 68) -#define __NR_msgctl (__NR_Linux + 69) -#define __NR_fcntl (__NR_Linux + 70) -#define __NR_flock (__NR_Linux + 71) -#define __NR_fsync (__NR_Linux + 72) -#define __NR_fdatasync (__NR_Linux + 73) -#define __NR_truncate (__NR_Linux + 74) -#define __NR_ftruncate (__NR_Linux + 75) -#define __NR_getdents (__NR_Linux + 76) -#define __NR_getcwd (__NR_Linux + 77) -#define __NR_chdir (__NR_Linux + 78) -#define __NR_fchdir (__NR_Linux + 79) -#define __NR_rename (__NR_Linux + 80) -#define __NR_mkdir (__NR_Linux + 81) -#define __NR_rmdir (__NR_Linux + 82) -#define __NR_creat (__NR_Linux + 83) -#define __NR_link (__NR_Linux + 84) -#define __NR_unlink (__NR_Linux + 85) -#define __NR_symlink (__NR_Linux + 86) -#define __NR_readlink (__NR_Linux + 87) -#define __NR_chmod (__NR_Linux + 88) -#define __NR_fchmod (__NR_Linux + 89) -#define __NR_chown (__NR_Linux + 90) -#define __NR_fchown (__NR_Linux + 91) -#define __NR_lchown (__NR_Linux + 92) -#define __NR_umask (__NR_Linux + 93) -#define __NR_gettimeofday (__NR_Linux + 94) -#define __NR_getrlimit (__NR_Linux + 95) -#define __NR_getrusage (__NR_Linux + 96) -#define __NR_sysinfo (__NR_Linux + 97) -#define __NR_times (__NR_Linux + 98) -#define __NR_ptrace (__NR_Linux + 99) -#define __NR_getuid (__NR_Linux + 100) -#define __NR_syslog (__NR_Linux + 101) -#define __NR_getgid (__NR_Linux + 102) -#define __NR_setuid (__NR_Linux + 103) -#define __NR_setgid (__NR_Linux + 104) -#define __NR_geteuid (__NR_Linux + 105) -#define __NR_getegid (__NR_Linux + 106) -#define __NR_setpgid (__NR_Linux + 107) -#define __NR_getppid (__NR_Linux + 108) -#define __NR_getpgrp (__NR_Linux + 109) -#define __NR_setsid (__NR_Linux + 110) -#define __NR_setreuid (__NR_Linux + 111) -#define __NR_setregid (__NR_Linux + 112) -#define __NR_getgroups (__NR_Linux + 113) -#define __NR_setgroups (__NR_Linux + 114) -#define __NR_setresuid (__NR_Linux + 115) -#define __NR_getresuid (__NR_Linux + 116) -#define __NR_setresgid (__NR_Linux + 117) -#define __NR_getresgid (__NR_Linux + 118) -#define __NR_getpgid (__NR_Linux + 119) -#define __NR_setfsuid (__NR_Linux + 120) -#define __NR_setfsgid (__NR_Linux + 121) -#define __NR_getsid (__NR_Linux + 122) -#define __NR_capget (__NR_Linux + 123) -#define __NR_capset (__NR_Linux + 124) -#define __NR_rt_sigpending (__NR_Linux + 125) -#define __NR_rt_sigtimedwait (__NR_Linux + 126) -#define __NR_rt_sigqueueinfo (__NR_Linux + 127) -#define __NR_rt_sigsuspend (__NR_Linux + 128) -#define __NR_sigaltstack (__NR_Linux + 129) -#define __NR_utime (__NR_Linux + 130) -#define __NR_mknod (__NR_Linux + 131) -#define __NR_personality (__NR_Linux + 132) -#define __NR_ustat (__NR_Linux + 133) -#define __NR_statfs (__NR_Linux + 134) -#define __NR_fstatfs (__NR_Linux + 135) -#define __NR_sysfs (__NR_Linux + 136) -#define __NR_getpriority (__NR_Linux + 137) -#define __NR_setpriority (__NR_Linux + 138) -#define __NR_sched_setparam (__NR_Linux + 139) -#define __NR_sched_getparam (__NR_Linux + 140) -#define __NR_sched_setscheduler (__NR_Linux + 141) -#define __NR_sched_getscheduler (__NR_Linux + 142) -#define __NR_sched_get_priority_max (__NR_Linux + 143) -#define __NR_sched_get_priority_min (__NR_Linux + 144) -#define __NR_sched_rr_get_interval (__NR_Linux + 145) -#define __NR_mlock (__NR_Linux + 146) -#define __NR_munlock (__NR_Linux + 147) -#define __NR_mlockall (__NR_Linux + 148) -#define __NR_munlockall (__NR_Linux + 149) -#define __NR_vhangup (__NR_Linux + 150) -#define __NR_pivot_root (__NR_Linux + 151) -#define __NR__sysctl (__NR_Linux + 152) -#define __NR_prctl (__NR_Linux + 153) -#define __NR_adjtimex (__NR_Linux + 154) -#define __NR_setrlimit (__NR_Linux + 155) -#define __NR_chroot (__NR_Linux + 156) -#define __NR_sync (__NR_Linux + 157) -#define __NR_acct (__NR_Linux + 158) -#define __NR_settimeofday (__NR_Linux + 159) -#define __NR_mount (__NR_Linux + 160) -#define __NR_umount2 (__NR_Linux + 161) -#define __NR_swapon (__NR_Linux + 162) -#define __NR_swapoff (__NR_Linux + 163) -#define __NR_reboot (__NR_Linux + 164) -#define __NR_sethostname (__NR_Linux + 165) -#define __NR_setdomainname (__NR_Linux + 166) -#define __NR_create_module (__NR_Linux + 167) -#define __NR_init_module (__NR_Linux + 168) -#define __NR_delete_module (__NR_Linux + 169) -#define __NR_get_kernel_syms (__NR_Linux + 170) -#define __NR_query_module (__NR_Linux + 171) -#define __NR_quotactl (__NR_Linux + 172) -#define __NR_nfsservctl (__NR_Linux + 173) -#define __NR_getpmsg (__NR_Linux + 174) -#define __NR_putpmsg (__NR_Linux + 175) -#define __NR_afs_syscall (__NR_Linux + 176) -#define __NR_reserved177 (__NR_Linux + 177) -#define __NR_gettid (__NR_Linux + 178) -#define __NR_readahead (__NR_Linux + 179) -#define __NR_setxattr (__NR_Linux + 180) -#define __NR_lsetxattr (__NR_Linux + 181) -#define __NR_fsetxattr (__NR_Linux + 182) -#define __NR_getxattr (__NR_Linux + 183) -#define __NR_lgetxattr (__NR_Linux + 184) -#define __NR_fgetxattr (__NR_Linux + 185) -#define __NR_listxattr (__NR_Linux + 186) -#define __NR_llistxattr (__NR_Linux + 187) -#define __NR_flistxattr (__NR_Linux + 188) -#define __NR_removexattr (__NR_Linux + 189) -#define __NR_lremovexattr (__NR_Linux + 190) -#define __NR_fremovexattr (__NR_Linux + 191) -#define __NR_tkill (__NR_Linux + 192) -#define __NR_reserved193 (__NR_Linux + 193) -#define __NR_futex (__NR_Linux + 194) -#define __NR_sched_setaffinity (__NR_Linux + 195) -#define __NR_sched_getaffinity (__NR_Linux + 196) -#define __NR_cacheflush (__NR_Linux + 197) -#define __NR_cachectl (__NR_Linux + 198) -#define __NR_sysmips (__NR_Linux + 199) -#define __NR_io_setup (__NR_Linux + 200) -#define __NR_io_destroy (__NR_Linux + 201) -#define __NR_io_getevents (__NR_Linux + 202) -#define __NR_io_submit (__NR_Linux + 203) -#define __NR_io_cancel (__NR_Linux + 204) -#define __NR_exit_group (__NR_Linux + 205) -#define __NR_lookup_dcookie (__NR_Linux + 206) -#define __NR_epoll_create (__NR_Linux + 207) -#define __NR_epoll_ctl (__NR_Linux + 208) -#define __NR_epoll_wait (__NR_Linux + 209) -#define __NR_remap_file_pages (__NR_Linux + 210) -#define __NR_rt_sigreturn (__NR_Linux + 211) -#define __NR_set_tid_address (__NR_Linux + 212) -#define __NR_restart_syscall (__NR_Linux + 213) -#define __NR_semtimedop (__NR_Linux + 214) -#define __NR_fadvise64 (__NR_Linux + 215) -#define __NR_timer_create (__NR_Linux + 216) -#define __NR_timer_settime (__NR_Linux + 217) -#define __NR_timer_gettime (__NR_Linux + 218) -#define __NR_timer_getoverrun (__NR_Linux + 219) -#define __NR_timer_delete (__NR_Linux + 220) -#define __NR_clock_settime (__NR_Linux + 221) -#define __NR_clock_gettime (__NR_Linux + 222) -#define __NR_clock_getres (__NR_Linux + 223) -#define __NR_clock_nanosleep (__NR_Linux + 224) -#define __NR_tgkill (__NR_Linux + 225) -#define __NR_utimes (__NR_Linux + 226) -#define __NR_mbind (__NR_Linux + 227) -#define __NR_get_mempolicy (__NR_Linux + 228) -#define __NR_set_mempolicy (__NR_Linux + 229) -#define __NR_mq_open (__NR_Linux + 230) -#define __NR_mq_unlink (__NR_Linux + 231) -#define __NR_mq_timedsend (__NR_Linux + 232) -#define __NR_mq_timedreceive (__NR_Linux + 233) -#define __NR_mq_notify (__NR_Linux + 234) -#define __NR_mq_getsetattr (__NR_Linux + 235) -#define __NR_vserver (__NR_Linux + 236) -#define __NR_waitid (__NR_Linux + 237) -/* #define __NR_sys_setaltroot (__NR_Linux + 238) */ -#define __NR_add_key (__NR_Linux + 239) -#define __NR_request_key (__NR_Linux + 240) -#define __NR_keyctl (__NR_Linux + 241) -#define __NR_set_thread_area (__NR_Linux + 242) -#define __NR_inotify_init (__NR_Linux + 243) -#define __NR_inotify_add_watch (__NR_Linux + 244) -#define __NR_inotify_rm_watch (__NR_Linux + 245) -#define __NR_migrate_pages (__NR_Linux + 246) -#define __NR_openat (__NR_Linux + 247) -#define __NR_mkdirat (__NR_Linux + 248) -#define __NR_mknodat (__NR_Linux + 249) -#define __NR_fchownat (__NR_Linux + 250) -#define __NR_futimesat (__NR_Linux + 251) -#define __NR_newfstatat (__NR_Linux + 252) -#define __NR_unlinkat (__NR_Linux + 253) -#define __NR_renameat (__NR_Linux + 254) -#define __NR_linkat (__NR_Linux + 255) -#define __NR_symlinkat (__NR_Linux + 256) -#define __NR_readlinkat (__NR_Linux + 257) -#define __NR_fchmodat (__NR_Linux + 258) -#define __NR_faccessat (__NR_Linux + 259) -#define __NR_pselect6 (__NR_Linux + 260) -#define __NR_ppoll (__NR_Linux + 261) -#define __NR_unshare (__NR_Linux + 262) -#define __NR_splice (__NR_Linux + 263) -#define __NR_sync_file_range (__NR_Linux + 264) -#define __NR_tee (__NR_Linux + 265) -#define __NR_vmsplice (__NR_Linux + 266) -#define __NR_move_pages (__NR_Linux + 267) -#define __NR_set_robust_list (__NR_Linux + 268) -#define __NR_get_robust_list (__NR_Linux + 269) -#define __NR_kexec_load (__NR_Linux + 270) -#define __NR_getcpu (__NR_Linux + 271) -#define __NR_epoll_pwait (__NR_Linux + 272) -#define __NR_ioprio_set (__NR_Linux + 273) -#define __NR_ioprio_get (__NR_Linux + 274) -#define __NR_utimensat (__NR_Linux + 275) -#define __NR_signalfd (__NR_Linux + 276) -#define __NR_timerfd (__NR_Linux + 277) -#define __NR_eventfd (__NR_Linux + 278) -#define __NR_fallocate (__NR_Linux + 279) -#define __NR_timerfd_create (__NR_Linux + 280) -#define __NR_timerfd_gettime (__NR_Linux + 281) -#define __NR_timerfd_settime (__NR_Linux + 282) -#define __NR_signalfd4 (__NR_Linux + 283) -#define __NR_eventfd2 (__NR_Linux + 284) -#define __NR_epoll_create1 (__NR_Linux + 285) -#define __NR_dup3 (__NR_Linux + 286) -#define __NR_pipe2 (__NR_Linux + 287) -#define __NR_inotify_init1 (__NR_Linux + 288) - -/* - * Offset of the last Linux 64-bit flavoured syscall - */ -#define __NR_Linux_syscalls 288 - -#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ - -#define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 288 - -#if _MIPS_SIM == _MIPS_SIM_NABI32 - -/* - * Linux N32 syscalls are in the range from 6000 to 6999. - */ -#define __NR_Linux 6000 -#define __NR_read (__NR_Linux + 0) -#define __NR_write (__NR_Linux + 1) -#define __NR_open (__NR_Linux + 2) -#define __NR_close (__NR_Linux + 3) -#define __NR_stat (__NR_Linux + 4) -#define __NR_fstat (__NR_Linux + 5) -#define __NR_lstat (__NR_Linux + 6) -#define __NR_poll (__NR_Linux + 7) -#define __NR_lseek (__NR_Linux + 8) -#define __NR_mmap (__NR_Linux + 9) -#define __NR_mprotect (__NR_Linux + 10) -#define __NR_munmap (__NR_Linux + 11) -#define __NR_brk (__NR_Linux + 12) -#define __NR_rt_sigaction (__NR_Linux + 13) -#define __NR_rt_sigprocmask (__NR_Linux + 14) -#define __NR_ioctl (__NR_Linux + 15) -#define __NR_pread64 (__NR_Linux + 16) -#define __NR_pwrite64 (__NR_Linux + 17) -#define __NR_readv (__NR_Linux + 18) -#define __NR_writev (__NR_Linux + 19) -#define __NR_access (__NR_Linux + 20) -#define __NR_pipe (__NR_Linux + 21) -#define __NR__newselect (__NR_Linux + 22) -#define __NR_sched_yield (__NR_Linux + 23) -#define __NR_mremap (__NR_Linux + 24) -#define __NR_msync (__NR_Linux + 25) -#define __NR_mincore (__NR_Linux + 26) -#define __NR_madvise (__NR_Linux + 27) -#define __NR_shmget (__NR_Linux + 28) -#define __NR_shmat (__NR_Linux + 29) -#define __NR_shmctl (__NR_Linux + 30) -#define __NR_dup (__NR_Linux + 31) -#define __NR_dup2 (__NR_Linux + 32) -#define __NR_pause (__NR_Linux + 33) -#define __NR_nanosleep (__NR_Linux + 34) -#define __NR_getitimer (__NR_Linux + 35) -#define __NR_setitimer (__NR_Linux + 36) -#define __NR_alarm (__NR_Linux + 37) -#define __NR_getpid (__NR_Linux + 38) -#define __NR_sendfile (__NR_Linux + 39) -#define __NR_socket (__NR_Linux + 40) -#define __NR_connect (__NR_Linux + 41) -#define __NR_accept (__NR_Linux + 42) -#define __NR_sendto (__NR_Linux + 43) -#define __NR_recvfrom (__NR_Linux + 44) -#define __NR_sendmsg (__NR_Linux + 45) -#define __NR_recvmsg (__NR_Linux + 46) -#define __NR_shutdown (__NR_Linux + 47) -#define __NR_bind (__NR_Linux + 48) -#define __NR_listen (__NR_Linux + 49) -#define __NR_getsockname (__NR_Linux + 50) -#define __NR_getpeername (__NR_Linux + 51) -#define __NR_socketpair (__NR_Linux + 52) -#define __NR_setsockopt (__NR_Linux + 53) -#define __NR_getsockopt (__NR_Linux + 54) -#define __NR_clone (__NR_Linux + 55) -#define __NR_fork (__NR_Linux + 56) -#define __NR_execve (__NR_Linux + 57) -#define __NR_exit (__NR_Linux + 58) -#define __NR_wait4 (__NR_Linux + 59) -#define __NR_kill (__NR_Linux + 60) -#define __NR_uname (__NR_Linux + 61) -#define __NR_semget (__NR_Linux + 62) -#define __NR_semop (__NR_Linux + 63) -#define __NR_semctl (__NR_Linux + 64) -#define __NR_shmdt (__NR_Linux + 65) -#define __NR_msgget (__NR_Linux + 66) -#define __NR_msgsnd (__NR_Linux + 67) -#define __NR_msgrcv (__NR_Linux + 68) -#define __NR_msgctl (__NR_Linux + 69) -#define __NR_fcntl (__NR_Linux + 70) -#define __NR_flock (__NR_Linux + 71) -#define __NR_fsync (__NR_Linux + 72) -#define __NR_fdatasync (__NR_Linux + 73) -#define __NR_truncate (__NR_Linux + 74) -#define __NR_ftruncate (__NR_Linux + 75) -#define __NR_getdents (__NR_Linux + 76) -#define __NR_getcwd (__NR_Linux + 77) -#define __NR_chdir (__NR_Linux + 78) -#define __NR_fchdir (__NR_Linux + 79) -#define __NR_rename (__NR_Linux + 80) -#define __NR_mkdir (__NR_Linux + 81) -#define __NR_rmdir (__NR_Linux + 82) -#define __NR_creat (__NR_Linux + 83) -#define __NR_link (__NR_Linux + 84) -#define __NR_unlink (__NR_Linux + 85) -#define __NR_symlink (__NR_Linux + 86) -#define __NR_readlink (__NR_Linux + 87) -#define __NR_chmod (__NR_Linux + 88) -#define __NR_fchmod (__NR_Linux + 89) -#define __NR_chown (__NR_Linux + 90) -#define __NR_fchown (__NR_Linux + 91) -#define __NR_lchown (__NR_Linux + 92) -#define __NR_umask (__NR_Linux + 93) -#define __NR_gettimeofday (__NR_Linux + 94) -#define __NR_getrlimit (__NR_Linux + 95) -#define __NR_getrusage (__NR_Linux + 96) -#define __NR_sysinfo (__NR_Linux + 97) -#define __NR_times (__NR_Linux + 98) -#define __NR_ptrace (__NR_Linux + 99) -#define __NR_getuid (__NR_Linux + 100) -#define __NR_syslog (__NR_Linux + 101) -#define __NR_getgid (__NR_Linux + 102) -#define __NR_setuid (__NR_Linux + 103) -#define __NR_setgid (__NR_Linux + 104) -#define __NR_geteuid (__NR_Linux + 105) -#define __NR_getegid (__NR_Linux + 106) -#define __NR_setpgid (__NR_Linux + 107) -#define __NR_getppid (__NR_Linux + 108) -#define __NR_getpgrp (__NR_Linux + 109) -#define __NR_setsid (__NR_Linux + 110) -#define __NR_setreuid (__NR_Linux + 111) -#define __NR_setregid (__NR_Linux + 112) -#define __NR_getgroups (__NR_Linux + 113) -#define __NR_setgroups (__NR_Linux + 114) -#define __NR_setresuid (__NR_Linux + 115) -#define __NR_getresuid (__NR_Linux + 116) -#define __NR_setresgid (__NR_Linux + 117) -#define __NR_getresgid (__NR_Linux + 118) -#define __NR_getpgid (__NR_Linux + 119) -#define __NR_setfsuid (__NR_Linux + 120) -#define __NR_setfsgid (__NR_Linux + 121) -#define __NR_getsid (__NR_Linux + 122) -#define __NR_capget (__NR_Linux + 123) -#define __NR_capset (__NR_Linux + 124) -#define __NR_rt_sigpending (__NR_Linux + 125) -#define __NR_rt_sigtimedwait (__NR_Linux + 126) -#define __NR_rt_sigqueueinfo (__NR_Linux + 127) -#define __NR_rt_sigsuspend (__NR_Linux + 128) -#define __NR_sigaltstack (__NR_Linux + 129) -#define __NR_utime (__NR_Linux + 130) -#define __NR_mknod (__NR_Linux + 131) -#define __NR_personality (__NR_Linux + 132) -#define __NR_ustat (__NR_Linux + 133) -#define __NR_statfs (__NR_Linux + 134) -#define __NR_fstatfs (__NR_Linux + 135) -#define __NR_sysfs (__NR_Linux + 136) -#define __NR_getpriority (__NR_Linux + 137) -#define __NR_setpriority (__NR_Linux + 138) -#define __NR_sched_setparam (__NR_Linux + 139) -#define __NR_sched_getparam (__NR_Linux + 140) -#define __NR_sched_setscheduler (__NR_Linux + 141) -#define __NR_sched_getscheduler (__NR_Linux + 142) -#define __NR_sched_get_priority_max (__NR_Linux + 143) -#define __NR_sched_get_priority_min (__NR_Linux + 144) -#define __NR_sched_rr_get_interval (__NR_Linux + 145) -#define __NR_mlock (__NR_Linux + 146) -#define __NR_munlock (__NR_Linux + 147) -#define __NR_mlockall (__NR_Linux + 148) -#define __NR_munlockall (__NR_Linux + 149) -#define __NR_vhangup (__NR_Linux + 150) -#define __NR_pivot_root (__NR_Linux + 151) -#define __NR__sysctl (__NR_Linux + 152) -#define __NR_prctl (__NR_Linux + 153) -#define __NR_adjtimex (__NR_Linux + 154) -#define __NR_setrlimit (__NR_Linux + 155) -#define __NR_chroot (__NR_Linux + 156) -#define __NR_sync (__NR_Linux + 157) -#define __NR_acct (__NR_Linux + 158) -#define __NR_settimeofday (__NR_Linux + 159) -#define __NR_mount (__NR_Linux + 160) -#define __NR_umount2 (__NR_Linux + 161) -#define __NR_swapon (__NR_Linux + 162) -#define __NR_swapoff (__NR_Linux + 163) -#define __NR_reboot (__NR_Linux + 164) -#define __NR_sethostname (__NR_Linux + 165) -#define __NR_setdomainname (__NR_Linux + 166) -#define __NR_create_module (__NR_Linux + 167) -#define __NR_init_module (__NR_Linux + 168) -#define __NR_delete_module (__NR_Linux + 169) -#define __NR_get_kernel_syms (__NR_Linux + 170) -#define __NR_query_module (__NR_Linux + 171) -#define __NR_quotactl (__NR_Linux + 172) -#define __NR_nfsservctl (__NR_Linux + 173) -#define __NR_getpmsg (__NR_Linux + 174) -#define __NR_putpmsg (__NR_Linux + 175) -#define __NR_afs_syscall (__NR_Linux + 176) -#define __NR_reserved177 (__NR_Linux + 177) -#define __NR_gettid (__NR_Linux + 178) -#define __NR_readahead (__NR_Linux + 179) -#define __NR_setxattr (__NR_Linux + 180) -#define __NR_lsetxattr (__NR_Linux + 181) -#define __NR_fsetxattr (__NR_Linux + 182) -#define __NR_getxattr (__NR_Linux + 183) -#define __NR_lgetxattr (__NR_Linux + 184) -#define __NR_fgetxattr (__NR_Linux + 185) -#define __NR_listxattr (__NR_Linux + 186) -#define __NR_llistxattr (__NR_Linux + 187) -#define __NR_flistxattr (__NR_Linux + 188) -#define __NR_removexattr (__NR_Linux + 189) -#define __NR_lremovexattr (__NR_Linux + 190) -#define __NR_fremovexattr (__NR_Linux + 191) -#define __NR_tkill (__NR_Linux + 192) -#define __NR_reserved193 (__NR_Linux + 193) -#define __NR_futex (__NR_Linux + 194) -#define __NR_sched_setaffinity (__NR_Linux + 195) -#define __NR_sched_getaffinity (__NR_Linux + 196) -#define __NR_cacheflush (__NR_Linux + 197) -#define __NR_cachectl (__NR_Linux + 198) -#define __NR_sysmips (__NR_Linux + 199) -#define __NR_io_setup (__NR_Linux + 200) -#define __NR_io_destroy (__NR_Linux + 201) -#define __NR_io_getevents (__NR_Linux + 202) -#define __NR_io_submit (__NR_Linux + 203) -#define __NR_io_cancel (__NR_Linux + 204) -#define __NR_exit_group (__NR_Linux + 205) -#define __NR_lookup_dcookie (__NR_Linux + 206) -#define __NR_epoll_create (__NR_Linux + 207) -#define __NR_epoll_ctl (__NR_Linux + 208) -#define __NR_epoll_wait (__NR_Linux + 209) -#define __NR_remap_file_pages (__NR_Linux + 210) -#define __NR_rt_sigreturn (__NR_Linux + 211) -#define __NR_fcntl64 (__NR_Linux + 212) -#define __NR_set_tid_address (__NR_Linux + 213) -#define __NR_restart_syscall (__NR_Linux + 214) -#define __NR_semtimedop (__NR_Linux + 215) -#define __NR_fadvise64 (__NR_Linux + 216) -#define __NR_statfs64 (__NR_Linux + 217) -#define __NR_fstatfs64 (__NR_Linux + 218) -#define __NR_sendfile64 (__NR_Linux + 219) -#define __NR_timer_create (__NR_Linux + 220) -#define __NR_timer_settime (__NR_Linux + 221) -#define __NR_timer_gettime (__NR_Linux + 222) -#define __NR_timer_getoverrun (__NR_Linux + 223) -#define __NR_timer_delete (__NR_Linux + 224) -#define __NR_clock_settime (__NR_Linux + 225) -#define __NR_clock_gettime (__NR_Linux + 226) -#define __NR_clock_getres (__NR_Linux + 227) -#define __NR_clock_nanosleep (__NR_Linux + 228) -#define __NR_tgkill (__NR_Linux + 229) -#define __NR_utimes (__NR_Linux + 230) -#define __NR_mbind (__NR_Linux + 231) -#define __NR_get_mempolicy (__NR_Linux + 232) -#define __NR_set_mempolicy (__NR_Linux + 233) -#define __NR_mq_open (__NR_Linux + 234) -#define __NR_mq_unlink (__NR_Linux + 235) -#define __NR_mq_timedsend (__NR_Linux + 236) -#define __NR_mq_timedreceive (__NR_Linux + 237) -#define __NR_mq_notify (__NR_Linux + 238) -#define __NR_mq_getsetattr (__NR_Linux + 239) -#define __NR_vserver (__NR_Linux + 240) -#define __NR_waitid (__NR_Linux + 241) -/* #define __NR_sys_setaltroot (__NR_Linux + 242) */ -#define __NR_add_key (__NR_Linux + 243) -#define __NR_request_key (__NR_Linux + 244) -#define __NR_keyctl (__NR_Linux + 245) -#define __NR_set_thread_area (__NR_Linux + 246) -#define __NR_inotify_init (__NR_Linux + 247) -#define __NR_inotify_add_watch (__NR_Linux + 248) -#define __NR_inotify_rm_watch (__NR_Linux + 249) -#define __NR_migrate_pages (__NR_Linux + 250) -#define __NR_openat (__NR_Linux + 251) -#define __NR_mkdirat (__NR_Linux + 252) -#define __NR_mknodat (__NR_Linux + 253) -#define __NR_fchownat (__NR_Linux + 254) -#define __NR_futimesat (__NR_Linux + 255) -#define __NR_newfstatat (__NR_Linux + 256) -#define __NR_unlinkat (__NR_Linux + 257) -#define __NR_renameat (__NR_Linux + 258) -#define __NR_linkat (__NR_Linux + 259) -#define __NR_symlinkat (__NR_Linux + 260) -#define __NR_readlinkat (__NR_Linux + 261) -#define __NR_fchmodat (__NR_Linux + 262) -#define __NR_faccessat (__NR_Linux + 263) -#define __NR_pselect6 (__NR_Linux + 264) -#define __NR_ppoll (__NR_Linux + 265) -#define __NR_unshare (__NR_Linux + 266) -#define __NR_splice (__NR_Linux + 267) -#define __NR_sync_file_range (__NR_Linux + 268) -#define __NR_tee (__NR_Linux + 269) -#define __NR_vmsplice (__NR_Linux + 270) -#define __NR_move_pages (__NR_Linux + 271) -#define __NR_set_robust_list (__NR_Linux + 272) -#define __NR_get_robust_list (__NR_Linux + 273) -#define __NR_kexec_load (__NR_Linux + 274) -#define __NR_getcpu (__NR_Linux + 275) -#define __NR_epoll_pwait (__NR_Linux + 276) -#define __NR_ioprio_set (__NR_Linux + 277) -#define __NR_ioprio_get (__NR_Linux + 278) -#define __NR_utimensat (__NR_Linux + 279) -#define __NR_signalfd (__NR_Linux + 280) -#define __NR_timerfd (__NR_Linux + 281) -#define __NR_eventfd (__NR_Linux + 282) -#define __NR_fallocate (__NR_Linux + 283) -#define __NR_timerfd_create (__NR_Linux + 284) -#define __NR_timerfd_gettime (__NR_Linux + 285) -#define __NR_timerfd_settime (__NR_Linux + 286) -#define __NR_signalfd4 (__NR_Linux + 287) -#define __NR_eventfd2 (__NR_Linux + 288) -#define __NR_epoll_create1 (__NR_Linux + 289) -#define __NR_dup3 (__NR_Linux + 290) -#define __NR_pipe2 (__NR_Linux + 291) -#define __NR_inotify_init1 (__NR_Linux + 292) - -/* - * Offset of the last N32 flavoured syscall - */ -#define __NR_Linux_syscalls 292 - -#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ - -#define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 292 - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ - -#define __ARCH_OMIT_COMPAT_SYS_GETDENTS64 -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -# ifdef CONFIG_32BIT -# define __ARCH_WANT_STAT64 -# define __ARCH_WANT_SYS_TIME -# endif -# ifdef CONFIG_MIPS32_O32 -# define __ARCH_WANT_COMPAT_SYS_TIME -# endif - -/* whitelists for checksyscalls */ -#define __IGNORE_select -#define __IGNORE_vfork -#define __IGNORE_time -#define __IGNORE_uselib -#define __IGNORE_fadvise64_64 -#define __IGNORE_getdents64 -#if _MIPS_SIM == _MIPS_SIM_NABI32 -#define __IGNORE_truncate64 -#define __IGNORE_ftruncate64 -#define __IGNORE_stat64 -#define __IGNORE_lstat64 -#define __IGNORE_fstat64 -#define __IGNORE_fstatat64 -#endif - -#endif /* !__ASSEMBLY__ */ - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n" #x "\t=\tsys_ni_syscall") - -#endif /* __KERNEL__ */ -#endif /* _ASM_UNISTD_H */ diff --git a/include/asm-mips/user.h b/include/asm-mips/user.h deleted file mode 100644 index afa83a4c1888..000000000000 --- a/include/asm-mips/user.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle - */ -#ifndef _ASM_USER_H -#define _ASM_USER_H - -#include -#include - -/* - * Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the `trad-core' bfd, NOT the irix-core). The file - * contents are as follows: - * - * upage: 1 page consisting of a user struct that tells gdb - * what is present in the file. Directly after this is a - * copy of the task_struct, which is currently not used by gdb, - * but it may come in handy at some point. All of the registers - * are stored as part of the upage. The upage should always be - * only one page long. - * data: The data segment follows next. We use current->end_text to - * current->brk to pick up all of the user variables, plus any memory - * that may have been sbrk'ed. No attempt is made to determine if a - * page is demand-zero or if a page is totally unused, we just cover - * the entire range. All of the addresses are rounded in such a way - * that an integral number of pages is written. - * stack: We need the stack information in order to get a meaningful - * backtrace. We need to write the data from usp to - * current->start_stack, so we round each of these in order to be able - * to write an integer number of pages. - */ -struct user { - unsigned long regs[EF_SIZE / /* integer and fp regs */ - sizeof(unsigned long) + 64]; - size_t u_tsize; /* text size (pages) */ - size_t u_dsize; /* data size (pages) */ - size_t u_ssize; /* stack size (pages) */ - unsigned long start_code; /* text starting address */ - unsigned long start_data; /* data starting address */ - unsigned long start_stack; /* stack starting address */ - long int signal; /* signal causing core dump */ - unsigned long u_ar0; /* help gdb find registers */ - unsigned long magic; /* identifies a core file */ - char u_comm[32]; /* user command name */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.start_data) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif /* _ASM_USER_H */ diff --git a/include/asm-mips/vga.h b/include/asm-mips/vga.h deleted file mode 100644 index f4cff7e4fa8a..000000000000 --- a/include/asm-mips/vga.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Access to VGA videoram - * - * (c) 1998 Martin Mares - */ -#ifndef _ASM_VGA_H -#define _ASM_VGA_H - -#include - -/* - * On the PC, we can just recalculate addresses and then - * access the videoram directly without any black magic. - */ - -#define VGA_MAP_MEM(x, s) (0xb0000000L + (unsigned long)(x)) - -#define vga_readb(x) (*(x)) -#define vga_writeb(x, y) (*(y) = (x)) - -#define VT_BUF_HAVE_RW -/* - * These are only needed for supporting VGA or MDA text mode, which use little - * endian byte ordering. - * In other cases, we can optimize by using native byte ordering and - * has already done the right job for us. - */ - -#undef scr_writew -#undef scr_readw - -static inline void scr_writew(u16 val, volatile u16 *addr) -{ - *addr = cpu_to_le16(val); -} - -static inline u16 scr_readw(volatile const u16 *addr) -{ - return le16_to_cpu(*addr); -} - -#define scr_memcpyw(d, s, c) memcpy(d, s, c) -#define scr_memmovew(d, s, c) memmove(d, s, c) -#define VT_BUF_HAVE_MEMCPYW -#define VT_BUF_HAVE_MEMMOVEW - -#endif /* _ASM_VGA_H */ diff --git a/include/asm-mips/vpe.h b/include/asm-mips/vpe.h deleted file mode 100644 index c6e1b961537d..000000000000 --- a/include/asm-mips/vpe.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - */ - -#ifndef _ASM_VPE_H -#define _ASM_VPE_H - -struct vpe_notifications { - void (*start)(int vpe); - void (*stop)(int vpe); - - struct list_head list; -}; - - -extern int vpe_notify(int index, struct vpe_notifications *notify); - -extern void *vpe_get_shared(int index); -extern int vpe_getuid(int index); -extern int vpe_getgid(int index); -extern char *vpe_getcwd(int index); - -#endif /* _ASM_VPE_H */ diff --git a/include/asm-mips/vr41xx/capcella.h b/include/asm-mips/vr41xx/capcella.h deleted file mode 100644 index e0ee05a3dfcc..000000000000 --- a/include/asm-mips/vr41xx/capcella.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * capcella.h, Include file for ZAO Networks Capcella. - * - * Copyright (C) 2002-2004 Yoichi Yuasa - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ZAO_CAPCELLA_H -#define __ZAO_CAPCELLA_H - -#include - -/* - * General-Purpose I/O Pin Number - */ -#define PC104PLUS_INTA_PIN 2 -#define PC104PLUS_INTB_PIN 3 -#define PC104PLUS_INTC_PIN 4 -#define PC104PLUS_INTD_PIN 5 - -/* - * Interrupt Number - */ -#define RTL8139_1_IRQ GIU_IRQ(PC104PLUS_INTC_PIN) -#define RTL8139_2_IRQ GIU_IRQ(PC104PLUS_INTD_PIN) -#define PC104PLUS_INTA_IRQ GIU_IRQ(PC104PLUS_INTA_PIN) -#define PC104PLUS_INTB_IRQ GIU_IRQ(PC104PLUS_INTB_PIN) -#define PC104PLUS_INTC_IRQ GIU_IRQ(PC104PLUS_INTC_PIN) -#define PC104PLUS_INTD_IRQ GIU_IRQ(PC104PLUS_INTD_PIN) - -#endif /* __ZAO_CAPCELLA_H */ diff --git a/include/asm-mips/vr41xx/giu.h b/include/asm-mips/vr41xx/giu.h deleted file mode 100644 index 0bcdd3a5c256..000000000000 --- a/include/asm-mips/vr41xx/giu.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Include file for NEC VR4100 series General-purpose I/O Unit. - * - * Copyright (C) 2005 Yoichi Yuasa - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __NEC_VR41XX_GIU_H -#define __NEC_VR41XX_GIU_H - -/* - * NEC VR4100 series GIU platform device IDs. - */ -enum { - GPIO_50PINS_PULLUPDOWN, - GPIO_36PINS, - GPIO_48PINS_EDGE_SELECT, -}; - -typedef enum { - IRQ_TRIGGER_LEVEL, - IRQ_TRIGGER_EDGE, - IRQ_TRIGGER_EDGE_FALLING, - IRQ_TRIGGER_EDGE_RISING, -} irq_trigger_t; - -typedef enum { - IRQ_SIGNAL_THROUGH, - IRQ_SIGNAL_HOLD, -} irq_signal_t; - -extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal); - -typedef enum { - IRQ_LEVEL_LOW, - IRQ_LEVEL_HIGH, -} irq_level_t; - -extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level); - -typedef enum { - GPIO_DATA_LOW, - GPIO_DATA_HIGH, - GPIO_DATA_INVAL, -} gpio_data_t; - -extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin); -extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data); - -typedef enum { - GPIO_INPUT, - GPIO_OUTPUT, - GPIO_OUTPUT_DISABLE, -} gpio_direction_t; - -extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir); - -typedef enum { - GPIO_PULL_DOWN, - GPIO_PULL_UP, - GPIO_PULL_DISABLE, -} gpio_pull_t; - -extern int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull); - -#endif /* __NEC_VR41XX_GIU_H */ diff --git a/include/asm-mips/vr41xx/irq.h b/include/asm-mips/vr41xx/irq.h deleted file mode 100644 index d315dfbc08f2..000000000000 --- a/include/asm-mips/vr41xx/irq.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * include/asm-mips/vr41xx/irq.h - * - * Interrupt numbers for NEC VR4100 series. - * - * Copyright (C) 1999 Michael Klar - * Copyright (C) 2001, 2002 Paul Mundt - * Copyright (C) 2002 MontaVista Software, Inc. - * Copyright (C) 2002 TimeSys Corp. - * Copyright (C) 2003-2006 Yoichi Yuasa - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __NEC_VR41XX_IRQ_H -#define __NEC_VR41XX_IRQ_H - -/* - * CPU core Interrupt Numbers - */ -#define MIPS_CPU_IRQ_BASE 0 -#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x)) -#define MIPS_SOFTINT0_IRQ MIPS_CPU_IRQ(0) -#define MIPS_SOFTINT1_IRQ MIPS_CPU_IRQ(1) -#define INT0_IRQ MIPS_CPU_IRQ(2) -#define INT1_IRQ MIPS_CPU_IRQ(3) -#define INT2_IRQ MIPS_CPU_IRQ(4) -#define INT3_IRQ MIPS_CPU_IRQ(5) -#define INT4_IRQ MIPS_CPU_IRQ(6) -#define TIMER_IRQ MIPS_CPU_IRQ(7) - -/* - * SYINT1 Interrupt Numbers - */ -#define SYSINT1_IRQ_BASE 8 -#define SYSINT1_IRQ(x) (SYSINT1_IRQ_BASE + (x)) -#define BATTRY_IRQ SYSINT1_IRQ(0) -#define POWER_IRQ SYSINT1_IRQ(1) -#define RTCLONG1_IRQ SYSINT1_IRQ(2) -#define ELAPSEDTIME_IRQ SYSINT1_IRQ(3) -/* RFU */ -#define PIU_IRQ SYSINT1_IRQ(5) -#define AIU_IRQ SYSINT1_IRQ(6) -#define KIU_IRQ SYSINT1_IRQ(7) -#define GIUINT_IRQ SYSINT1_IRQ(8) -#define SIU_IRQ SYSINT1_IRQ(9) -#define BUSERR_IRQ SYSINT1_IRQ(10) -#define SOFTINT_IRQ SYSINT1_IRQ(11) -#define CLKRUN_IRQ SYSINT1_IRQ(12) -#define DOZEPIU_IRQ SYSINT1_IRQ(13) -#define SYSINT1_IRQ_LAST DOZEPIU_IRQ - -/* - * SYSINT2 Interrupt Numbers - */ -#define SYSINT2_IRQ_BASE 24 -#define SYSINT2_IRQ(x) (SYSINT2_IRQ_BASE + (x)) -#define RTCLONG2_IRQ SYSINT2_IRQ(0) -#define LED_IRQ SYSINT2_IRQ(1) -#define HSP_IRQ SYSINT2_IRQ(2) -#define TCLOCK_IRQ SYSINT2_IRQ(3) -#define FIR_IRQ SYSINT2_IRQ(4) -#define CEU_IRQ SYSINT2_IRQ(4) /* same number as FIR_IRQ */ -#define DSIU_IRQ SYSINT2_IRQ(5) -#define PCI_IRQ SYSINT2_IRQ(6) -#define SCU_IRQ SYSINT2_IRQ(7) -#define CSI_IRQ SYSINT2_IRQ(8) -#define BCU_IRQ SYSINT2_IRQ(9) -#define ETHERNET_IRQ SYSINT2_IRQ(10) -#define SYSINT2_IRQ_LAST ETHERNET_IRQ - -/* - * GIU Interrupt Numbers - */ -#define GIU_IRQ_BASE 40 -#define GIU_IRQ(x) (GIU_IRQ_BASE + (x)) /* IRQ 40-71 */ -#define GIU_IRQ_LAST GIU_IRQ(31) - -/* - * VRC4173 Interrupt Numbers - */ -#define VRC4173_IRQ_BASE 72 -#define VRC4173_IRQ(x) (VRC4173_IRQ_BASE + (x)) -#define VRC4173_USB_IRQ VRC4173_IRQ(0) -#define VRC4173_PCMCIA2_IRQ VRC4173_IRQ(1) -#define VRC4173_PCMCIA1_IRQ VRC4173_IRQ(2) -#define VRC4173_PS2CH2_IRQ VRC4173_IRQ(3) -#define VRC4173_PS2CH1_IRQ VRC4173_IRQ(4) -#define VRC4173_PIU_IRQ VRC4173_IRQ(5) -#define VRC4173_AIU_IRQ VRC4173_IRQ(6) -#define VRC4173_KIU_IRQ VRC4173_IRQ(7) -#define VRC4173_GIU_IRQ VRC4173_IRQ(8) -#define VRC4173_AC97_IRQ VRC4173_IRQ(9) -#define VRC4173_AC97INT1_IRQ VRC4173_IRQ(10) -/* RFU */ -#define VRC4173_DOZEPIU_IRQ VRC4173_IRQ(13) -#define VRC4173_IRQ_LAST VRC4173_DOZEPIU_IRQ - -#endif /* __NEC_VR41XX_IRQ_H */ diff --git a/include/asm-mips/vr41xx/mpc30x.h b/include/asm-mips/vr41xx/mpc30x.h deleted file mode 100644 index 1d67df843dc3..000000000000 --- a/include/asm-mips/vr41xx/mpc30x.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * mpc30x.h, Include file for Victor MP-C303/304. - * - * Copyright (C) 2002-2004 Yoichi Yuasa - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __VICTOR_MPC30X_H -#define __VICTOR_MPC30X_H - -#include - -/* - * General-Purpose I/O Pin Number - */ -#define VRC4173_PIN 1 -#define MQ200_PIN 4 - -/* - * Interrupt Number - */ -#define VRC4173_CASCADE_IRQ GIU_IRQ(VRC4173_PIN) -#define MQ200_IRQ GIU_IRQ(MQ200_PIN) - -#endif /* __VICTOR_MPC30X_H */ diff --git a/include/asm-mips/vr41xx/pci.h b/include/asm-mips/vr41xx/pci.h deleted file mode 100644 index 6fc01ce19777..000000000000 --- a/include/asm-mips/vr41xx/pci.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Include file for NEC VR4100 series PCI Control Unit. - * - * Copyright (C) 2004-2005 Yoichi Yuasa - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __NEC_VR41XX_PCI_H -#define __NEC_VR41XX_PCI_H - -#define PCI_MASTER_ADDRESS_MASK 0x7fffffffU - -struct pci_master_address_conversion { - uint32_t bus_base_address; - uint32_t address_mask; - uint32_t pci_base_address; -}; - -struct pci_target_address_conversion { - uint32_t address_mask; - uint32_t bus_base_address; -}; - -typedef enum { - CANNOT_LOCK_FROM_DEVICE, - CAN_LOCK_FROM_DEVICE, -} pci_exclusive_access_t; - -struct pci_mailbox_address { - uint32_t base_address; -}; - -struct pci_target_address_window { - uint32_t base_address; -}; - -typedef enum { - PCI_ARBITRATION_MODE_FAIR, - PCI_ARBITRATION_MODE_ALTERNATE_0, - PCI_ARBITRATION_MODE_ALTERNATE_B, -} pci_arbiter_priority_control_t; - -typedef enum { - PCI_TAKE_AWAY_GNT_DISABLE, - PCI_TAKE_AWAY_GNT_ENABLE, -} pci_take_away_gnt_mode_t; - -struct pci_controller_unit_setup { - struct pci_master_address_conversion *master_memory1; - struct pci_master_address_conversion *master_memory2; - - struct pci_target_address_conversion *target_memory1; - struct pci_target_address_conversion *target_memory2; - - struct pci_master_address_conversion *master_io; - - pci_exclusive_access_t exclusive_access; - - uint32_t pci_clock_max; - uint8_t wait_time_limit_from_irdy_to_trdy; /* Only VR4122 is supported */ - - struct pci_mailbox_address *mailbox; - struct pci_target_address_window *target_window1; - struct pci_target_address_window *target_window2; - - uint8_t master_latency_timer; - uint8_t retry_limit; - - pci_arbiter_priority_control_t arbiter_priority_control; - pci_take_away_gnt_mode_t take_away_gnt_mode; - - struct resource *mem_resource; - struct resource *io_resource; -}; - -extern void vr41xx_pciu_setup(struct pci_controller_unit_setup *setup); - -#endif /* __NEC_VR41XX_PCI_H */ diff --git a/include/asm-mips/vr41xx/siu.h b/include/asm-mips/vr41xx/siu.h deleted file mode 100644 index da9f6e373409..000000000000 --- a/include/asm-mips/vr41xx/siu.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Include file for NEC VR4100 series Serial Interface Unit. - * - * Copyright (C) 2005-2008 Yoichi Yuasa - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __NEC_VR41XX_SIU_H -#define __NEC_VR41XX_SIU_H - -#define SIU_PORTS_MAX 2 - -typedef enum { - SIU_INTERFACE_RS232C, - SIU_INTERFACE_IRDA, -} siu_interface_t; - -extern void vr41xx_select_siu_interface(siu_interface_t interface); - -typedef enum { - SIU_USE_IRDA, - FIR_USE_IRDA, -} irda_use_t; - -extern void vr41xx_use_irda(irda_use_t use); - -typedef enum { - SHARP_IRDA, - TEMIC_IRDA, - HP_IRDA, -} irda_module_t; - -typedef enum { - IRDA_TX_1_5MBPS, - IRDA_TX_4MBPS, -} irda_speed_t; - -extern void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed); - -#ifdef CONFIG_SERIAL_VR41XX_CONSOLE -extern void vr41xx_siu_early_setup(struct uart_port *port); -#else -static inline void vr41xx_siu_early_setup(struct uart_port *port) {} -#endif - -#endif /* __NEC_VR41XX_SIU_H */ diff --git a/include/asm-mips/vr41xx/tb0219.h b/include/asm-mips/vr41xx/tb0219.h deleted file mode 100644 index dc981b4be0a4..000000000000 --- a/include/asm-mips/vr41xx/tb0219.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * tb0219.h, Include file for TANBAC TB0219. - * - * Copyright (C) 2002-2004 Yoichi Yuasa - * - * Modified for TANBAC TB0219: - * Copyright (C) 2003 Megasolution Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __TANBAC_TB0219_H -#define __TANBAC_TB0219_H - -#include - -/* - * General-Purpose I/O Pin Number - */ -#define TB0219_PCI_SLOT1_PIN 2 -#define TB0219_PCI_SLOT2_PIN 3 -#define TB0219_PCI_SLOT3_PIN 4 - -/* - * Interrupt Number - */ -#define TB0219_PCI_SLOT1_IRQ GIU_IRQ(TB0219_PCI_SLOT1_PIN) -#define TB0219_PCI_SLOT2_IRQ GIU_IRQ(TB0219_PCI_SLOT2_PIN) -#define TB0219_PCI_SLOT3_IRQ GIU_IRQ(TB0219_PCI_SLOT3_PIN) - -#endif /* __TANBAC_TB0219_H */ diff --git a/include/asm-mips/vr41xx/tb0226.h b/include/asm-mips/vr41xx/tb0226.h deleted file mode 100644 index de527dcfa5f3..000000000000 --- a/include/asm-mips/vr41xx/tb0226.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * tb0226.h, Include file for TANBAC TB0226. - * - * Copyright (C) 2002-2004 Yoichi Yuasa - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __TANBAC_TB0226_H -#define __TANBAC_TB0226_H - -#include - -/* - * General-Purpose I/O Pin Number - */ -#define GD82559_1_PIN 2 -#define GD82559_2_PIN 3 -#define UPD720100_INTA_PIN 4 -#define UPD720100_INTB_PIN 8 -#define UPD720100_INTC_PIN 13 - -/* - * Interrupt Number - */ -#define GD82559_1_IRQ GIU_IRQ(GD82559_1_PIN) -#define GD82559_2_IRQ GIU_IRQ(GD82559_2_PIN) -#define UPD720100_INTA_IRQ GIU_IRQ(UPD720100_INTA_PIN) -#define UPD720100_INTB_IRQ GIU_IRQ(UPD720100_INTB_PIN) -#define UPD720100_INTC_IRQ GIU_IRQ(UPD720100_INTC_PIN) - -#endif /* __TANBAC_TB0226_H */ diff --git a/include/asm-mips/vr41xx/tb0287.h b/include/asm-mips/vr41xx/tb0287.h deleted file mode 100644 index 61bead68abf0..000000000000 --- a/include/asm-mips/vr41xx/tb0287.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * tb0287.h, Include file for TANBAC TB0287 mini-ITX board. - * - * Copyright (C) 2005 Media Lab Inc. - * - * This code is largely based on tb0219.h. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __TANBAC_TB0287_H -#define __TANBAC_TB0287_H - -#include - -/* - * General-Purpose I/O Pin Number - */ -#define TB0287_PCI_SLOT_PIN 2 -#define TB0287_SM501_PIN 3 -#define TB0287_SIL680A_PIN 8 -#define TB0287_RTL8110_PIN 13 - -/* - * Interrupt Number - */ -#define TB0287_PCI_SLOT_IRQ GIU_IRQ(TB0287_PCI_SLOT_PIN) -#define TB0287_SM501_IRQ GIU_IRQ(TB0287_SM501_PIN) -#define TB0287_SIL680A_IRQ GIU_IRQ(TB0287_SIL680A_PIN) -#define TB0287_RTL8110_IRQ GIU_IRQ(TB0287_RTL8110_PIN) - -#endif /* __TANBAC_TB0287_H */ diff --git a/include/asm-mips/vr41xx/vr41xx.h b/include/asm-mips/vr41xx/vr41xx.h deleted file mode 100644 index 22be64971cc6..000000000000 --- a/include/asm-mips/vr41xx/vr41xx.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * include/asm-mips/vr41xx/vr41xx.h - * - * Include file for NEC VR4100 series. - * - * Copyright (C) 1999 Michael Klar - * Copyright (C) 2001, 2002 Paul Mundt - * Copyright (C) 2002 MontaVista Software, Inc. - * Copyright (C) 2002 TimeSys Corp. - * Copyright (C) 2003-2008 Yoichi Yuasa - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __NEC_VR41XX_H -#define __NEC_VR41XX_H - -#include - -/* - * CPU Revision - */ -/* VR4122 0x00000c70-0x00000c72 */ -#define PRID_VR4122_REV1_0 0x00000c70 -#define PRID_VR4122_REV2_0 0x00000c70 -#define PRID_VR4122_REV2_1 0x00000c70 -#define PRID_VR4122_REV3_0 0x00000c71 -#define PRID_VR4122_REV3_1 0x00000c72 - -/* VR4181A 0x00000c73-0x00000c7f */ -#define PRID_VR4181A_REV1_0 0x00000c73 -#define PRID_VR4181A_REV1_1 0x00000c74 - -/* VR4131 0x00000c80-0x00000c83 */ -#define PRID_VR4131_REV1_2 0x00000c80 -#define PRID_VR4131_REV2_0 0x00000c81 -#define PRID_VR4131_REV2_1 0x00000c82 -#define PRID_VR4131_REV2_2 0x00000c83 - -/* VR4133 0x00000c84- */ -#define PRID_VR4133 0x00000c84 - -/* - * Bus Control Uint - */ -extern unsigned long vr41xx_calculate_clock_frequency(void); -extern unsigned long vr41xx_get_vtclock_frequency(void); -extern unsigned long vr41xx_get_tclock_frequency(void); - -/* - * Clock Mask Unit - */ -typedef enum { - PIU_CLOCK, - SIU_CLOCK, - AIU_CLOCK, - KIU_CLOCK, - FIR_CLOCK, - DSIU_CLOCK, - CSI_CLOCK, - PCIU_CLOCK, - HSP_CLOCK, - PCI_CLOCK, - CEU_CLOCK, - ETHER0_CLOCK, - ETHER1_CLOCK -} vr41xx_clock_t; - -extern void vr41xx_supply_clock(vr41xx_clock_t clock); -extern void vr41xx_mask_clock(vr41xx_clock_t clock); - -/* - * Interrupt Control Unit - */ -extern int vr41xx_set_intassign(unsigned int irq, unsigned char intassign); -extern int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int)); - -#define PIUINT_COMMAND 0x0040 -#define PIUINT_DATA 0x0020 -#define PIUINT_PAGE1 0x0010 -#define PIUINT_PAGE0 0x0008 -#define PIUINT_DATALOST 0x0004 -#define PIUINT_STATUSCHANGE 0x0001 - -extern void vr41xx_enable_piuint(uint16_t mask); -extern void vr41xx_disable_piuint(uint16_t mask); - -#define AIUINT_INPUT_DMAEND 0x0800 -#define AIUINT_INPUT_DMAHALT 0x0400 -#define AIUINT_INPUT_DATALOST 0x0200 -#define AIUINT_INPUT_DATA 0x0100 -#define AIUINT_OUTPUT_DMAEND 0x0008 -#define AIUINT_OUTPUT_DMAHALT 0x0004 -#define AIUINT_OUTPUT_NODATA 0x0002 - -extern void vr41xx_enable_aiuint(uint16_t mask); -extern void vr41xx_disable_aiuint(uint16_t mask); - -#define KIUINT_DATALOST 0x0004 -#define KIUINT_DATAREADY 0x0002 -#define KIUINT_SCAN 0x0001 - -extern void vr41xx_enable_kiuint(uint16_t mask); -extern void vr41xx_disable_kiuint(uint16_t mask); - -#define DSIUINT_CTS 0x0800 -#define DSIUINT_RXERR 0x0400 -#define DSIUINT_RX 0x0200 -#define DSIUINT_TX 0x0100 -#define DSIUINT_ALL 0x0f00 - -extern void vr41xx_enable_dsiuint(uint16_t mask); -extern void vr41xx_disable_dsiuint(uint16_t mask); - -#define FIRINT_UNIT 0x0010 -#define FIRINT_RX_DMAEND 0x0008 -#define FIRINT_RX_DMAHALT 0x0004 -#define FIRINT_TX_DMAEND 0x0002 -#define FIRINT_TX_DMAHALT 0x0001 - -extern void vr41xx_enable_firint(uint16_t mask); -extern void vr41xx_disable_firint(uint16_t mask); - -extern void vr41xx_enable_pciint(void); -extern void vr41xx_disable_pciint(void); - -extern void vr41xx_enable_scuint(void); -extern void vr41xx_disable_scuint(void); - -#define CSIINT_TX_DMAEND 0x0040 -#define CSIINT_TX_DMAHALT 0x0020 -#define CSIINT_TX_DATA 0x0010 -#define CSIINT_TX_FIFOEMPTY 0x0008 -#define CSIINT_RX_DMAEND 0x0004 -#define CSIINT_RX_DMAHALT 0x0002 -#define CSIINT_RX_FIFOEMPTY 0x0001 - -extern void vr41xx_enable_csiint(uint16_t mask); -extern void vr41xx_disable_csiint(uint16_t mask); - -extern void vr41xx_enable_bcuint(void); -extern void vr41xx_disable_bcuint(void); - -#ifdef CONFIG_SERIAL_VR41XX_CONSOLE -extern void vr41xx_siu_setup(void); -#else -static inline void vr41xx_siu_setup(void) {} -#endif - -#endif /* __NEC_VR41XX_H */ diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h deleted file mode 100644 index 22361d5e3bf0..000000000000 --- a/include/asm-mips/war.h +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - * Copyright (C) 2007 Maciej W. Rozycki - */ -#ifndef _ASM_WAR_H -#define _ASM_WAR_H - -#include - -/* - * Work around certain R4000 CPU errata (as implemented by GCC): - * - * - A double-word or a variable shift may give an incorrect result - * if executed immediately after starting an integer division: - * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", - * erratum #28 - * "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum - * #19 - * - * - A double-word or a variable shift may give an incorrect result - * if executed while an integer multiplication is in progress: - * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", - * errata #16 & #28 - * - * - An integer division may give an incorrect result if started in - * a delay slot of a taken branch or a jump: - * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", - * erratum #52 - */ -#ifdef CONFIG_CPU_R4000_WORKAROUNDS -#define R4000_WAR 1 -#else -#define R4000_WAR 0 -#endif - -/* - * Work around certain R4400 CPU errata (as implemented by GCC): - * - * - A double-word or a variable shift may give an incorrect result - * if executed immediately after starting an integer division: - * "MIPS R4400MC Errata, Processor Revision 1.0", erratum #10 - * "MIPS R4400MC Errata, Processor Revision 2.0 & 3.0", erratum #4 - */ -#ifdef CONFIG_CPU_R4400_WORKAROUNDS -#define R4400_WAR 1 -#else -#define R4400_WAR 0 -#endif - -/* - * Work around the "daddi" and "daddiu" CPU errata: - * - * - The `daddi' instruction fails to trap on overflow. - * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", - * erratum #23 - * - * - The `daddiu' instruction can produce an incorrect result. - * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", - * erratum #41 - * "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum - * #15 - * "MIPS R4400PC/SC Errata, Processor Revision 1.0", erratum #7 - * "MIPS R4400MC Errata, Processor Revision 1.0", erratum #5 - */ -#ifdef CONFIG_CPU_DADDI_WORKAROUNDS -#define DADDI_WAR 1 -#else -#define DADDI_WAR 0 -#endif - -/* - * Another R4600 erratum. Due to the lack of errata information the exact - * technical details aren't known. I've experimentally found that disabling - * interrupts during indexed I-cache flushes seems to be sufficient to deal - * with the issue. - */ -#ifndef R4600_V1_INDEX_ICACHEOP_WAR -#error Check setting of R4600_V1_INDEX_ICACHEOP_WAR for your platform -#endif - -/* - * Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata: - * - * 18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D, - * Hit_Invalidate_D and Create_Dirty_Excl_D should only be - * executed if there is no other dcache activity. If the dcache is - * accessed for another instruction immeidately preceding when these - * cache instructions are executing, it is possible that the dcache - * tag match outputs used by these cache instructions will be - * incorrect. These cache instructions should be preceded by at least - * four instructions that are not any kind of load or store - * instruction. - * - * This is not allowed: lw - * nop - * nop - * nop - * cache Hit_Writeback_Invalidate_D - * - * This is allowed: lw - * nop - * nop - * nop - * nop - * cache Hit_Writeback_Invalidate_D - */ -#ifndef R4600_V1_HIT_CACHEOP_WAR -#error Check setting of R4600_V1_HIT_CACHEOP_WAR for your platform -#endif - - -/* - * Writeback and invalidate the primary cache dcache before DMA. - * - * R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D, - * Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only - * operate correctly if the internal data cache refill buffer is empty. These - * CACHE instructions should be separated from any potential data cache miss - * by a load instruction to an uncached address to empty the response buffer." - * (Revision 2.0 device errata from IDT available on http://www.idt.com/ - * in .pdf format.) - */ -#ifndef R4600_V2_HIT_CACHEOP_WAR -#error Check setting of R4600_V2_HIT_CACHEOP_WAR for your platform -#endif - -/* - * When an interrupt happens on a CP0 register read instruction, CPU may - * lock up or read corrupted values of CP0 registers after it enters - * the exception handler. - * - * This workaround makes sure that we read a "safe" CP0 register as the - * first thing in the exception handler, which breaks one of the - * pre-conditions for this problem. - */ -#ifndef R5432_CP0_INTERRUPT_WAR -#error Check setting of R5432_CP0_INTERRUPT_WAR for your platform -#endif - -/* - * Workaround for the Sibyte M3 errata the text of which can be found at - * - * http://sibyte.broadcom.com/hw/bcm1250/docs/pass2errata.txt - * - * This will enable the use of a special TLB refill handler which does a - * consistency check on the information in c0_badvaddr and c0_entryhi and - * will just return and take the exception again if the information was - * found to be inconsistent. - */ -#ifndef BCM1250_M3_WAR -#error Check setting of BCM1250_M3_WAR for your platform -#endif - -/* - * This is a DUART workaround related to glitches around register accesses - */ -#ifndef SIBYTE_1956_WAR -#error Check setting of SIBYTE_1956_WAR for your platform -#endif - -/* - * Fill buffers not flushed on CACHE instructions - * - * Hit_Invalidate_I cacheops invalidate an icache line but the refill - * for that line can get stale data from the fill buffer instead of - * accessing memory if the previous icache miss was also to that line. - * - * Workaround: generate an icache refill from a different line - * - * Affects: - * MIPS 4K RTL revision <3.0, PRID revision <4 - */ -#ifndef MIPS4K_ICACHE_REFILL_WAR -#error Check setting of MIPS4K_ICACHE_REFILL_WAR for your platform -#endif - -/* - * Missing implicit forced flush of evictions caused by CACHE - * instruction - * - * Evictions caused by a CACHE instructions are not forced on to the - * bus. The BIU gives higher priority to fetches than to the data from - * the eviction buffer and no collision detection is performed between - * fetches and pending data from the eviction buffer. - * - * Workaround: Execute a SYNC instruction after the cache instruction - * - * Affects: - * MIPS 5Kc,5Kf RTL revision <2.3, PRID revision <8 - * MIPS 20Kc RTL revision <4.0, PRID revision diff --git a/include/asm-mips/xtalk/xtalk.h b/include/asm-mips/xtalk/xtalk.h deleted file mode 100644 index 79bac882a739..000000000000 --- a/include/asm-mips/xtalk/xtalk.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * xtalk.h -- platform-independent crosstalk interface, derived from - * IRIX , revision 1.38. - * - * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc. - * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) - */ -#ifndef _ASM_XTALK_XTALK_H -#define _ASM_XTALK_XTALK_H - -#ifndef __ASSEMBLY__ -/* - * User-level device driver visible types - */ -typedef char xwidgetnum_t; /* xtalk widget number (0..15) */ - -#define XWIDGET_NONE -1 - -typedef int xwidget_part_num_t; /* xtalk widget part number */ - -#define XWIDGET_PART_NUM_NONE -1 - -typedef int xwidget_rev_num_t; /* xtalk widget revision number */ - -#define XWIDGET_REV_NUM_NONE -1 - -typedef int xwidget_mfg_num_t; /* xtalk widget manufacturing ID */ - -#define XWIDGET_MFG_NUM_NONE -1 - -typedef struct xtalk_piomap_s *xtalk_piomap_t; - -/* It is often convenient to fold the XIO target port - * number into the XIO address. - */ -#define XIO_NOWHERE (0xFFFFFFFFFFFFFFFFull) -#define XIO_ADDR_BITS (0x0000FFFFFFFFFFFFull) -#define XIO_PORT_BITS (0xF000000000000000ull) -#define XIO_PORT_SHIFT (60) - -#define XIO_PACKED(x) (((x)&XIO_PORT_BITS) != 0) -#define XIO_ADDR(x) ((x)&XIO_ADDR_BITS) -#define XIO_PORT(x) ((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT)) -#define XIO_PACK(p, o) ((((uint64_t)(p))<, revision 1.32. - * - * Copyright (C) 1996, 1999 Silcon Graphics, Inc. - * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) - */ -#ifndef _ASM_XTALK_XWIDGET_H -#define _ASM_XTALK_XWIDGET_H - -#include -#include - -#define WIDGET_ID 0x04 -#define WIDGET_STATUS 0x0c -#define WIDGET_ERR_UPPER_ADDR 0x14 -#define WIDGET_ERR_LOWER_ADDR 0x1c -#define WIDGET_CONTROL 0x24 -#define WIDGET_REQ_TIMEOUT 0x2c -#define WIDGET_INTDEST_UPPER_ADDR 0x34 -#define WIDGET_INTDEST_LOWER_ADDR 0x3c -#define WIDGET_ERR_CMD_WORD 0x44 -#define WIDGET_LLP_CFG 0x4c -#define WIDGET_TFLUSH 0x54 - -/* WIDGET_ID */ -#define WIDGET_REV_NUM 0xf0000000 -#define WIDGET_PART_NUM 0x0ffff000 -#define WIDGET_MFG_NUM 0x00000ffe -#define WIDGET_REV_NUM_SHFT 28 -#define WIDGET_PART_NUM_SHFT 12 -#define WIDGET_MFG_NUM_SHFT 1 - -#define XWIDGET_PART_NUM(widgetid) (((widgetid) & WIDGET_PART_NUM) >> WIDGET_PART_NUM_SHFT) -#define XWIDGET_REV_NUM(widgetid) (((widgetid) & WIDGET_REV_NUM) >> WIDGET_REV_NUM_SHFT) -#define XWIDGET_MFG_NUM(widgetid) (((widgetid) & WIDGET_MFG_NUM) >> WIDGET_MFG_NUM_SHFT) - -/* WIDGET_STATUS */ -#define WIDGET_LLP_REC_CNT 0xff000000 -#define WIDGET_LLP_TX_CNT 0x00ff0000 -#define WIDGET_PENDING 0x0000001f - -/* WIDGET_ERR_UPPER_ADDR */ -#define WIDGET_ERR_UPPER_ADDR_ONLY 0x0000ffff - -/* WIDGET_CONTROL */ -#define WIDGET_F_BAD_PKT 0x00010000 -#define WIDGET_LLP_XBAR_CRD 0x0000f000 -#define WIDGET_LLP_XBAR_CRD_SHFT 12 -#define WIDGET_CLR_RLLP_CNT 0x00000800 -#define WIDGET_CLR_TLLP_CNT 0x00000400 -#define WIDGET_SYS_END 0x00000200 -#define WIDGET_MAX_TRANS 0x000001f0 -#define WIDGET_WIDGET_ID 0x0000000f - -/* WIDGET_INTDEST_UPPER_ADDR */ -#define WIDGET_INT_VECTOR 0xff000000 -#define WIDGET_INT_VECTOR_SHFT 24 -#define WIDGET_TARGET_ID 0x000f0000 -#define WIDGET_TARGET_ID_SHFT 16 -#define WIDGET_UPP_ADDR 0x0000ffff - -/* WIDGET_ERR_CMD_WORD */ -#define WIDGET_DIDN 0xf0000000 -#define WIDGET_SIDN 0x0f000000 -#define WIDGET_PACTYP 0x00f00000 -#define WIDGET_TNUM 0x000f8000 -#define WIDGET_COHERENT 0x00004000 -#define WIDGET_DS 0x00003000 -#define WIDGET_GBR 0x00000800 -#define WIDGET_VBPM 0x00000400 -#define WIDGET_ERROR 0x00000200 -#define WIDGET_BARRIER 0x00000100 - -/* WIDGET_LLP_CFG */ -#define WIDGET_LLP_MAXRETRY 0x03ff0000 -#define WIDGET_LLP_MAXRETRY_SHFT 16 -#define WIDGET_LLP_NULLTIMEOUT 0x0000fc00 -#define WIDGET_LLP_NULLTIMEOUT_SHFT 10 -#define WIDGET_LLP_MAXBURST 0x000003ff -#define WIDGET_LLP_MAXBURST_SHFT 0 - -/* - * according to the crosstalk spec, only 32-bits access to the widget - * configuration registers is allowed. some widgets may allow 64-bits - * access but software should not depend on it. registers beyond the - * widget target flush register are widget dependent thus will not be - * defined here - */ -#ifndef __ASSEMBLY__ -typedef u32 widgetreg_t; - -/* widget configuration registers */ -typedef volatile struct widget_cfg { - widgetreg_t w_pad_0; /* 0x00 */ - widgetreg_t w_id; /* 0x04 */ - widgetreg_t w_pad_1; /* 0x08 */ - widgetreg_t w_status; /* 0x0c */ - widgetreg_t w_pad_2; /* 0x10 */ - widgetreg_t w_err_upper_addr; /* 0x14 */ - widgetreg_t w_pad_3; /* 0x18 */ - widgetreg_t w_err_lower_addr; /* 0x1c */ - widgetreg_t w_pad_4; /* 0x20 */ - widgetreg_t w_control; /* 0x24 */ - widgetreg_t w_pad_5; /* 0x28 */ - widgetreg_t w_req_timeout; /* 0x2c */ - widgetreg_t w_pad_6; /* 0x30 */ - widgetreg_t w_intdest_upper_addr; /* 0x34 */ - widgetreg_t w_pad_7; /* 0x38 */ - widgetreg_t w_intdest_lower_addr; /* 0x3c */ - widgetreg_t w_pad_8; /* 0x40 */ - widgetreg_t w_err_cmd_word; /* 0x44 */ - widgetreg_t w_pad_9; /* 0x48 */ - widgetreg_t w_llp_cfg; /* 0x4c */ - widgetreg_t w_pad_10; /* 0x50 */ - widgetreg_t w_tflush; /* 0x54 */ -} widget_cfg_t; - -typedef struct { - unsigned didn:4; - unsigned sidn:4; - unsigned pactyp:4; - unsigned tnum:5; - unsigned ct:1; - unsigned ds:2; - unsigned gbr:1; - unsigned vbpm:1; - unsigned error:1; - unsigned bo:1; - unsigned other:8; -} w_err_cmd_word_f; - -typedef union { - widgetreg_t r; - w_err_cmd_word_f f; -} w_err_cmd_word_u; - -typedef struct xwidget_info_s *xwidget_info_t; - -/* - * Crosstalk Widget Hardware Identification, as defined in the Crosstalk spec. - */ -typedef struct xwidget_hwid_s { - xwidget_part_num_t part_num; - xwidget_rev_num_t rev_num; - xwidget_mfg_num_t mfg_num; -} *xwidget_hwid_t; - - -/* - * Returns 1 if a driver that handles devices described by hwid1 is able - * to manage a device with hardwareid hwid2. NOTE: We don't check rev - * numbers at all. - */ -#define XWIDGET_HARDWARE_ID_MATCH(hwid1, hwid2) \ - (((hwid1)->part_num == (hwid2)->part_num) && \ - (((hwid1)->mfg_num == XWIDGET_MFG_NUM_NONE) || \ - ((hwid2)->mfg_num == XWIDGET_MFG_NUM_NONE) || \ - ((hwid1)->mfg_num == (hwid2)->mfg_num))) - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_XTALK_XWIDGET_H */ -- cgit v1.2.3 From d86a8123b11a9a40d850f6e88b89c948c2477da3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 11 Oct 2008 16:18:53 +0100 Subject: MIPS: IP checksums: Remove unncessary folding of sum to 16 bit. Signed-off-by: Ralf Baechle --- arch/mips/lib/csum_partial.S | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index edac9892c51a..201d82ee4c71 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -276,11 +276,6 @@ LEAF(csum_partial) dsra32 sum, sum, 0 addu sum, v1 #endif - sll v1, sum, 16 - addu sum, v1 - sltu v1, sum, v1 - srl sum, sum, 16 - addu sum, v1 /* odd buffer alignment? */ beqz t7, 1f @@ -678,11 +673,6 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) dsra32 sum, sum, 0 addu sum, v1 #endif - sll v1, sum, 16 - addu sum, v1 - sltu v1, sum, v1 - srl sum, sum, 16 - addu sum, v1 /* odd buffer alignment? */ beqz odd, 1f -- cgit v1.2.3 From 60724ca59eda766a30be57aec6b49bc3e2bead91 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 11 Oct 2008 16:18:53 +0100 Subject: MIPS: IP checksums: Remove unncessary .set pseudos They possibly silence meaningful warnings ... Signed-off-by: Ralf Baechle --- arch/mips/lib/csum_partial.S | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index 201d82ee4c71..84d5e6a1e76f 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -55,20 +55,14 @@ #define UNIT(unit) ((unit)*NBYTES) #define ADDC(sum,reg) \ - .set push; \ - .set noat; \ ADD sum, reg; \ sltu v1, sum, reg; \ ADD sum, v1; \ - .set pop #define ADDC32(sum,reg) \ - .set push; \ - .set noat; \ addu sum, reg; \ sltu v1, sum, reg; \ addu sum, v1; \ - .set pop #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \ LOAD _t0, (offset + UNIT(0))(src); \ @@ -267,8 +261,6 @@ LEAF(csum_partial) 1: ADDC(sum, t1) /* fold checksum */ - .set push - .set noat #ifdef USE_DOUBLE dsll32 v1, sum, 0 daddu sum, v1 @@ -284,7 +276,6 @@ LEAF(csum_partial) srl sum, sum, 8 or sum, v1 andi sum, 0xffff - .set pop 1: .set reorder /* Add the passed partial csum. */ @@ -664,8 +655,6 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) ADDC(sum, t2) .Ldone: /* fold checksum */ - .set push - .set noat #ifdef USE_DOUBLE dsll32 v1, sum, 0 daddu sum, v1 @@ -681,7 +670,6 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) srl sum, sum, 8 or sum, v1 andi sum, 0xffff - .set pop 1: .set reorder ADDC32(sum, psum) -- cgit v1.2.3 From b65a75b8c91c0f05047399401407371678fe9549 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 11 Oct 2008 16:18:53 +0100 Subject: MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment. Signed-off-by: Ralf Baechle --- arch/mips/lib/csum_partial.S | 35 ++++++++++++++++++++++++----------- 1 file changed, 24 insertions(+), 11 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index 84d5e6a1e76f..6b876ca299ee 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -270,13 +270,20 @@ LEAF(csum_partial) #endif /* odd buffer alignment? */ - beqz t7, 1f - nop - sll v1, sum, 8 +#ifdef CPU_MIPSR2 + wsbh v1, sum + movn sum, v1, t7 +#else + beqz t7, 1f /* odd buffer alignment? */ + lui v1, 0x00ff + addu v1, 0x00ff + and t0, sum, v1 + sll t0, t0, 8 srl sum, sum, 8 - or sum, v1 - andi sum, 0xffff + and sum, sum, v1 + or sum, sum, t0 1: +#endif .set reorder /* Add the passed partial csum. */ ADDC32(sum, a2) @@ -663,14 +670,20 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc) addu sum, v1 #endif - /* odd buffer alignment? */ - beqz odd, 1f - nop - sll v1, sum, 8 +#ifdef CPU_MIPSR2 + wsbh v1, sum + movn sum, v1, odd +#else + beqz odd, 1f /* odd buffer alignment? */ + lui v1, 0x00ff + addu v1, 0x00ff + and t0, sum, v1 + sll t0, t0, 8 srl sum, sum, 8 - or sum, v1 - andi sum, 0xffff + and sum, sum, v1 + or sum, sum, t0 1: +#endif .set reorder ADDC32(sum, psum) jr ra -- cgit v1.2.3 From 2a31b03335e570dce5fdd082e0d71d48b2cb4290 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 28 Aug 2008 15:17:49 +0100 Subject: MIPS: Rewrite spinlocks to ticket locks. Based on patch by Chad Reese of Cavium Networks. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 5 - arch/mips/include/asm/spinlock.h | 253 ++++++++++++++++++++++++--------- arch/mips/include/asm/spinlock_types.h | 7 +- 3 files changed, 188 insertions(+), 77 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index c15416c2e89d..16097a8f5c52 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -610,11 +610,6 @@ source "arch/mips/vr41xx/Kconfig" endmenu -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h index bb897016c491..5d98a3cb85b7 100644 --- a/arch/mips/include/asm/spinlock.h +++ b/arch/mips/include/asm/spinlock.h @@ -9,62 +9,125 @@ #ifndef _ASM_SPINLOCK_H #define _ASM_SPINLOCK_H +#include + #include #include /* * Your basic SMP spinlocks, allowing only a single CPU anywhere + * + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * These are fair FIFO ticket locks + * + * (the type definitions are in asm/spinlock_types.h) */ -#define __raw_spin_is_locked(x) ((x)->lock != 0) -#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) -#define __raw_spin_unlock_wait(x) \ - do { cpu_relax(); } while ((x)->lock) /* - * Simple spin lock operations. There are two variants, one clears IRQ's - * on the local processor, one does not. - * - * We make no fairness assumptions. They have a cost. + * Ticket locks are conceptually two parts, one indicating the current head of + * the queue, and the other indicating the current tail. The lock is acquired + * by atomically noting the tail and incrementing it by one (thus adding + * ourself to the queue and noting our position), then waiting until the head + * becomes equal to the the initial value of the tail. */ +static inline int __raw_spin_is_locked(raw_spinlock_t *lock) +{ + unsigned int counters = ACCESS_ONCE(lock->lock); + + return ((counters >> 14) ^ counters) & 0x1fff; +} + +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) +#define __raw_spin_unlock_wait(x) \ + while (__raw_spin_is_locked(x)) { cpu_relax(); } + +static inline int __raw_spin_is_contended(raw_spinlock_t *lock) +{ + unsigned int counters = ACCESS_ONCE(lock->lock); + + return (((counters >> 14) - counters) & 0x1fff) > 1; +} + static inline void __raw_spin_lock(raw_spinlock_t *lock) { - unsigned int tmp; + int my_ticket; + int tmp; if (R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set noreorder # __raw_spin_lock \n" - "1: ll %1, %2 \n" - " bnez %1, 1b \n" - " li %1, 1 \n" - " sc %1, %0 \n" - " beqzl %1, 1b \n" + __asm__ __volatile__ ( + " .set push # __raw_spin_lock \n" + " .set noreorder \n" + " \n" + "1: ll %[ticket], %[ticket_ptr] \n" + " addiu %[my_ticket], %[ticket], 0x4000 \n" + " sc %[my_ticket], %[ticket_ptr] \n" + " beqzl %[my_ticket], 1b \n" " nop \n" - " .set reorder \n" - : "=m" (lock->lock), "=&r" (tmp) - : "m" (lock->lock) - : "memory"); + " srl %[my_ticket], %[ticket], 14 \n" + " andi %[my_ticket], %[my_ticket], 0x1fff \n" + " andi %[ticket], %[ticket], 0x1fff \n" + " bne %[ticket], %[my_ticket], 4f \n" + " subu %[ticket], %[my_ticket], %[ticket] \n" + "2: \n" + " .subsection 2 \n" + "4: andi %[ticket], %[ticket], 0x1fff \n" + "5: sll %[ticket], 5 \n" + " \n" + "6: bnez %[ticket], 6b \n" + " subu %[ticket], 1 \n" + " \n" + " lw %[ticket], %[ticket_ptr] \n" + " andi %[ticket], %[ticket], 0x1fff \n" + " beq %[ticket], %[my_ticket], 2b \n" + " subu %[ticket], %[my_ticket], %[ticket] \n" + " b 5b \n" + " subu %[ticket], %[ticket], 1 \n" + " .previous \n" + " .set pop \n" + : [ticket_ptr] "+m" (lock->lock), + [ticket] "=&r" (tmp), + [my_ticket] "=&r" (my_ticket)); } else { - __asm__ __volatile__( - " .set noreorder # __raw_spin_lock \n" - "1: ll %1, %2 \n" - " bnez %1, 2f \n" - " li %1, 1 \n" - " sc %1, %0 \n" - " beqz %1, 2f \n" + __asm__ __volatile__ ( + " .set push # __raw_spin_lock \n" + " .set noreorder \n" + " \n" + " ll %[ticket], %[ticket_ptr] \n" + "1: addiu %[my_ticket], %[ticket], 0x4000 \n" + " sc %[my_ticket], %[ticket_ptr] \n" + " beqz %[my_ticket], 3f \n" " nop \n" + " srl %[my_ticket], %[ticket], 14 \n" + " andi %[my_ticket], %[my_ticket], 0x1fff \n" + " andi %[ticket], %[ticket], 0x1fff \n" + " bne %[ticket], %[my_ticket], 4f \n" + " subu %[ticket], %[my_ticket], %[ticket] \n" + "2: \n" " .subsection 2 \n" - "2: ll %1, %2 \n" - " bnez %1, 2b \n" - " li %1, 1 \n" - " b 1b \n" - " nop \n" + "3: b 1b \n" + " ll %[ticket], %[ticket_ptr] \n" + " \n" + "4: andi %[ticket], %[ticket], 0x1fff \n" + "5: sll %[ticket], 5 \n" + " \n" + "6: bnez %[ticket], 6b \n" + " subu %[ticket], 1 \n" + " \n" + " lw %[ticket], %[ticket_ptr] \n" + " andi %[ticket], %[ticket], 0x1fff \n" + " beq %[ticket], %[my_ticket], 2b \n" + " subu %[ticket], %[my_ticket], %[ticket] \n" + " b 5b \n" + " subu %[ticket], %[ticket], 1 \n" " .previous \n" - " .set reorder \n" - : "=m" (lock->lock), "=&r" (tmp) - : "m" (lock->lock) - : "memory"); + " .set pop \n" + : [ticket_ptr] "+m" (lock->lock), + [ticket] "=&r" (tmp), + [my_ticket] "=&r" (my_ticket)); } smp_llsc_mb(); @@ -72,55 +135,103 @@ static inline void __raw_spin_lock(raw_spinlock_t *lock) static inline void __raw_spin_unlock(raw_spinlock_t *lock) { - smp_mb(); + int tmp; - __asm__ __volatile__( - " .set noreorder # __raw_spin_unlock \n" - " sw $0, %0 \n" - " .set\treorder \n" - : "=m" (lock->lock) - : "m" (lock->lock) - : "memory"); + smp_llsc_mb(); + + if (R10000_LLSC_WAR) { + __asm__ __volatile__ ( + " # __raw_spin_unlock \n" + "1: ll %[ticket], %[ticket_ptr] \n" + " addiu %[ticket], %[ticket], 1 \n" + " ori %[ticket], %[ticket], 0x2000 \n" + " xori %[ticket], %[ticket], 0x2000 \n" + " sc %[ticket], %[ticket_ptr] \n" + " beqzl %[ticket], 2f \n" + : [ticket_ptr] "+m" (lock->lock), + [ticket] "=&r" (tmp)); + } else { + __asm__ __volatile__ ( + " .set push # __raw_spin_unlock \n" + " .set noreorder \n" + " \n" + " ll %[ticket], %[ticket_ptr] \n" + "1: addiu %[ticket], %[ticket], 1 \n" + " ori %[ticket], %[ticket], 0x2000 \n" + " xori %[ticket], %[ticket], 0x2000 \n" + " sc %[ticket], %[ticket_ptr] \n" + " beqz %[ticket], 2f \n" + " nop \n" + " \n" + " .subsection 2 \n" + "2: b 1b \n" + " ll %[ticket], %[ticket_ptr] \n" + " .previous \n" + " .set pop \n" + : [ticket_ptr] "+m" (lock->lock), + [ticket] "=&r" (tmp)); + } } static inline unsigned int __raw_spin_trylock(raw_spinlock_t *lock) { - unsigned int temp, res; + int tmp, tmp2, tmp3; if (R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set noreorder # __raw_spin_trylock \n" - "1: ll %0, %3 \n" - " ori %2, %0, 1 \n" - " sc %2, %1 \n" - " beqzl %2, 1b \n" - " nop \n" - " andi %2, %0, 1 \n" - " .set reorder" - : "=&r" (temp), "=m" (lock->lock), "=&r" (res) - : "m" (lock->lock) - : "memory"); + __asm__ __volatile__ ( + " .set push # __raw_spin_trylock \n" + " .set noreorder \n" + " \n" + "1: ll %[ticket], %[ticket_ptr] \n" + " srl %[my_ticket], %[ticket], 14 \n" + " andi %[my_ticket], %[my_ticket], 0x1fff \n" + " andi %[now_serving], %[ticket], 0x1fff \n" + " bne %[my_ticket], %[now_serving], 3f \n" + " addiu %[ticket], %[ticket], 0x4000 \n" + " sc %[ticket], %[ticket_ptr] \n" + " beqzl %[ticket], 1b \n" + " li %[ticket], 1 \n" + "2: \n" + " .subsection 2 \n" + "3: b 2b \n" + " li %[ticket], 0 \n" + " .previous \n" + " .set pop \n" + : [ticket_ptr] "+m" (lock->lock), + [ticket] "=&r" (tmp), + [my_ticket] "=&r" (tmp2), + [now_serving] "=&r" (tmp3)); } else { - __asm__ __volatile__( - " .set noreorder # __raw_spin_trylock \n" - "1: ll %0, %3 \n" - " ori %2, %0, 1 \n" - " sc %2, %1 \n" - " beqz %2, 2f \n" - " andi %2, %0, 1 \n" + __asm__ __volatile__ ( + " .set push # __raw_spin_trylock \n" + " .set noreorder \n" + " \n" + " ll %[ticket], %[ticket_ptr] \n" + "1: srl %[my_ticket], %[ticket], 14 \n" + " andi %[my_ticket], %[my_ticket], 0x1fff \n" + " andi %[now_serving], %[ticket], 0x1fff \n" + " bne %[my_ticket], %[now_serving], 3f \n" + " addiu %[ticket], %[ticket], 0x4000 \n" + " sc %[ticket], %[ticket_ptr] \n" + " beqz %[ticket], 4f \n" + " li %[ticket], 1 \n" + "2: \n" " .subsection 2 \n" - "2: b 1b \n" - " nop \n" + "3: b 2b \n" + " li %[ticket], 0 \n" + "4: b 1b \n" + " ll %[ticket], %[ticket_ptr] \n" " .previous \n" - " .set reorder" - : "=&r" (temp), "=m" (lock->lock), "=&r" (res) - : "m" (lock->lock) - : "memory"); + " .set pop \n" + : [ticket_ptr] "+m" (lock->lock), + [ticket] "=&r" (tmp), + [my_ticket] "=&r" (tmp2), + [now_serving] "=&r" (tmp3)); } smp_llsc_mb(); - return res == 0; + return tmp; } /* diff --git a/arch/mips/include/asm/spinlock_types.h b/arch/mips/include/asm/spinlock_types.h index ce26c5048b15..adeedaa116c1 100644 --- a/arch/mips/include/asm/spinlock_types.h +++ b/arch/mips/include/asm/spinlock_types.h @@ -6,7 +6,12 @@ #endif typedef struct { - volatile unsigned int lock; + /* + * bits 0..13: serving_now + * bits 14 : junk data + * bits 15..28: ticket + */ + unsigned int lock; } raw_spinlock_t; #define __RAW_SPIN_LOCK_UNLOCKED { 0 } -- cgit v1.2.3 From 4bacc68766b11c191ee1567f54103f109c002f4f Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 18 Sep 2008 00:13:58 +0900 Subject: MIPS: TXx9: Add TX4939 ATA support (v2) Add a helper routine to register tx4939ide driver and use it on RBTX4939 board. Signed-off-by: Atsushi Nemoto Acked-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/include/asm/txx9/tx4939.h | 1 + arch/mips/txx9/generic/setup_tx4939.c | 46 +++++++++++++++++++++++++++++++++++ arch/mips/txx9/rbtx4939/setup.c | 1 + 3 files changed, 48 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h index 7ce2dff3b7cc..88badb423010 100644 --- a/arch/mips/include/asm/txx9/tx4939.h +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -540,5 +540,6 @@ void tx4939_setup_pcierr_irq(void); void tx4939_irq_init(void); int tx4939_irq(void); void tx4939_mtd_init(int ch); +void tx4939_ata_init(void); #endif /* __ASM_TXX9_TX4939_H */ diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index f14a497077da..6c0049a5bbc1 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -389,6 +390,51 @@ void __init tx4939_mtd_init(int ch) txx9_physmap_flash_init(ch, start, size, &pdata); } +#define TX4939_ATA_REG_PHYS(ch) (TX4939_ATA_REG(ch) & 0xfffffffffULL) +void __init tx4939_ata_init(void) +{ + static struct resource ata0_res[] = { + { + .start = TX4939_ATA_REG_PHYS(0), + .end = TX4939_ATA_REG_PHYS(0) + 0x1000 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = TXX9_IRQ_BASE + TX4939_IR_ATA(0), + .flags = IORESOURCE_IRQ, + }, + }; + static struct resource ata1_res[] = { + { + .start = TX4939_ATA_REG_PHYS(1), + .end = TX4939_ATA_REG_PHYS(1) + 0x1000 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = TXX9_IRQ_BASE + TX4939_IR_ATA(1), + .flags = IORESOURCE_IRQ, + }, + }; + static struct platform_device ata0_dev = { + .name = "tx4939ide", + .id = 0, + .num_resources = ARRAY_SIZE(ata0_res), + .resource = ata0_res, + }; + static struct platform_device ata1_dev = { + .name = "tx4939ide", + .id = 1, + .num_resources = ARRAY_SIZE(ata1_res), + .resource = ata1_res, + }; + __u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg); + + if (pcfg & TX4939_PCFG_ATA0MODE) + platform_device_register(&ata0_dev); + if ((pcfg & (TX4939_PCFG_ATA1MODE | + TX4939_PCFG_ET1MODE | + TX4939_PCFG_ET0MODE)) == TX4939_PCFG_ATA1MODE) + platform_device_register(&ata1_dev); +} + static void __init tx4939_stop_unused_modules(void) { __u64 pcfg, rst = 0, ckd = 0; diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index 277864d5e779..9855d7bccc20 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -264,6 +264,7 @@ static void __init rbtx4939_device_init(void) #endif rbtx4939_led_setup(); tx4939_wdt_init(); + tx4939_ata_init(); } static void __init rbtx4939_setup(void) -- cgit v1.2.3 From 71ec6ccfdc2706e767189d40016fc802305067bb Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 31 Oct 2006 02:52:56 +0000 Subject: MIPS: Replace use of with native implementations. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uaccess.h | 264 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 263 insertions(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index b895144d577a..09ff5bb17445 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -13,7 +13,6 @@ #include #include #include -#include /* * The fs value determines whether argument validity checking should be @@ -373,6 +372,269 @@ do { \ extern void __put_user_unknown(void); +/* + * put_user_unaligned: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ +#define put_user_unaligned(x,ptr) \ + __put_user_unaligned_check((x),(ptr),sizeof(*(ptr))) + +/* + * get_user_unaligned: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define get_user_unaligned(x,ptr) \ + __get_user_unaligned_check((x),(ptr),sizeof(*(ptr))) + +/* + * __put_user_unaligned: - Write a simple value into user space, with less checking. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + */ +#define __put_user_unaligned(x,ptr) \ + __put_user_unaligned_nocheck((x),(ptr),sizeof(*(ptr))) + +/* + * __get_user_unaligned: - Get a simple variable from user space, with less checking. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Caller must check the pointer with access_ok() before calling this + * function. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define __get_user_unaligned(x,ptr) \ + __get_user__unalignednocheck((x),(ptr),sizeof(*(ptr))) + +/* + * Yuck. We need two variants, one for 64bit operation and one + * for 32 bit mode and old iron. + */ +#ifdef CONFIG_32BIT +#define __GET_USER_UNALIGNED_DW(val, ptr) \ + __get_user_unaligned_asm_ll32(val, ptr) +#endif +#ifdef CONFIG_64BIT +#define __GET_USER_UNALIGNED_DW(val, ptr) \ + __get_user_unaligned_asm(val, "uld", ptr) +#endif + +extern void __get_user_unaligned_unknown(void); + +#define __get_user_unaligned_common(val, size, ptr) \ +do { \ + switch (size) { \ + case 1: __get_user_asm(val, "lb", ptr); break; \ + case 2: __get_user_unaligned_asm(val, "ulh", ptr); break; \ + case 4: __get_user_unaligned_asm(val, "ulw", ptr); break; \ + case 8: __GET_USER_UNALIGNED_DW(val, ptr); break; \ + default: __get_user_unaligned_unknown(); break; \ + } \ +} while (0) + +#define __get_user_unaligned_nocheck(x,ptr,size) \ +({ \ + int __gu_err; \ + \ + __get_user_unaligned_common((x), size, ptr); \ + __gu_err; \ +}) + +#define __get_user_unaligned_check(x,ptr,size) \ +({ \ + int __gu_err = -EFAULT; \ + const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \ + \ + if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \ + __get_user_unaligned_common((x), size, __gu_ptr); \ + \ + __gu_err; \ +}) + +#define __get_user_unaligned_asm(val, insn, addr) \ +{ \ + long __gu_tmp; \ + \ + __asm__ __volatile__( \ + "1: " insn " %1, %3 \n" \ + "2: \n" \ + " .section .fixup,\"ax\" \n" \ + "3: li %0, %4 \n" \ + " j 2b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " "__UA_ADDR "\t1b, 3b \n" \ + " "__UA_ADDR "\t1b + 4, 3b \n" \ + " .previous \n" \ + : "=r" (__gu_err), "=r" (__gu_tmp) \ + : "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \ + \ + (val) = (__typeof__(*(addr))) __gu_tmp; \ +} + +/* + * Get a long long 64 using 32 bit registers. + */ +#define __get_user_unaligned_asm_ll32(val, addr) \ +{ \ + unsigned long long __gu_tmp; \ + \ + __asm__ __volatile__( \ + "1: ulw %1, (%3) \n" \ + "2: ulw %D1, 4(%3) \n" \ + " move %0, $0 \n" \ + "3: .section .fixup,\"ax\" \n" \ + "4: li %0, %4 \n" \ + " move %1, $0 \n" \ + " move %D1, $0 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " " __UA_ADDR " 1b, 4b \n" \ + " " __UA_ADDR " 1b + 4, 4b \n" \ + " " __UA_ADDR " 2b, 4b \n" \ + " " __UA_ADDR " 2b + 4, 4b \n" \ + " .previous \n" \ + : "=r" (__gu_err), "=&r" (__gu_tmp) \ + : "0" (0), "r" (addr), "i" (-EFAULT)); \ + (val) = (__typeof__(*(addr))) __gu_tmp; \ +} + +/* + * Yuck. We need two variants, one for 64bit operation and one + * for 32 bit mode and old iron. + */ +#ifdef CONFIG_32BIT +#define __PUT_USER_UNALIGNED_DW(ptr) __put_user_unaligned_asm_ll32(ptr) +#endif +#ifdef CONFIG_64BIT +#define __PUT_USER_UNALIGNED_DW(ptr) __put_user_unaligned_asm("usd", ptr) +#endif + +#define __put_user_unaligned_nocheck(x,ptr,size) \ +({ \ + __typeof__(*(ptr)) __pu_val; \ + int __pu_err = 0; \ + \ + __pu_val = (x); \ + switch (size) { \ + case 1: __put_user_asm("sb", ptr); break; \ + case 2: __put_user_unaligned_asm("ush", ptr); break; \ + case 4: __put_user_unaligned_asm("usw", ptr); break; \ + case 8: __PUT_USER_UNALIGNED_DW(ptr); break; \ + default: __put_user_unaligned_unknown(); break; \ + } \ + __pu_err; \ +}) + +#define __put_user_unaligned_check(x,ptr,size) \ +({ \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + int __pu_err = -EFAULT; \ + \ + if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \ + switch (size) { \ + case 1: __put_user_asm("sb", __pu_addr); break; \ + case 2: __put_user_unaligned_asm("ush", __pu_addr); break; \ + case 4: __put_user_unaligned_asm("usw", __pu_addr); break; \ + case 8: __PUT_USER_UNALGINED_DW(__pu_addr); break; \ + default: __put_user_unaligned_unknown(); break; \ + } \ + } \ + __pu_err; \ +}) + +#define __put_user_unaligned_asm(insn, ptr) \ +{ \ + __asm__ __volatile__( \ + "1: " insn " %z2, %3 # __put_user_unaligned_asm\n" \ + "2: \n" \ + " .section .fixup,\"ax\" \n" \ + "3: li %0, %4 \n" \ + " j 2b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " " __UA_ADDR " 1b, 3b \n" \ + " .previous \n" \ + : "=r" (__pu_err) \ + : "0" (0), "Jr" (__pu_val), "o" (__m(ptr)), \ + "i" (-EFAULT)); \ +} + +#define __put_user_unaligned_asm_ll32(ptr) \ +{ \ + __asm__ __volatile__( \ + "1: sw %2, (%3) # __put_user_unaligned_asm_ll32 \n" \ + "2: sw %D2, 4(%3) \n" \ + "3: \n" \ + " .section .fixup,\"ax\" \n" \ + "4: li %0, %4 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " " __UA_ADDR " 1b, 4b \n" \ + " " __UA_ADDR " 1b + 4, 4b \n" \ + " " __UA_ADDR " 2b, 4b \n" \ + " " __UA_ADDR " 2b + 4, 4b \n" \ + " .previous" \ + : "=r" (__pu_err) \ + : "0" (0), "r" (__pu_val), "r" (ptr), \ + "i" (-EFAULT)); \ +} + +extern void __put_user_unaligned_unknown(void); + /* * We're generating jump to subroutines which will be outside the range of * jump instructions -- cgit v1.2.3 From 8192c9ea9ac44213d1266ecb64615519443979b3 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 23 Sep 2008 00:04:26 -0700 Subject: MIPS: Add HARDWARE_WATCHPOINTS configure option. This is automatically set for all MIPS32 and MIPS64 processors. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 16097a8f5c52..cd5fbf6f0784 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1268,6 +1268,13 @@ config CPU_SUPPORTS_32BIT_KERNEL config CPU_SUPPORTS_64BIT_KERNEL bool +# +# Set to y for ptrace access to watch registers. +# +config HARDWARE_WATCHPOINTS + bool + default y if CPU_MIPS32 || CPU_MIPS64 + menu "Kernel type" choice -- cgit v1.2.3 From 6aa3524c182c01b8b8b7c21c4da20c742a9b4d86 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 23 Sep 2008 00:05:54 -0700 Subject: MIPS: Add HARDWARE_WATCHPOINTS definitions and support code. This is the main support code for the patch. Here we just add the code, the following patches hook it up. Signed-off-by: David Daney Signed-off-by: Ralf Baechle create mode 100644 arch/mips/include/asm/watch.h create mode 100644 arch/mips/kernel/watch.c --- arch/mips/include/asm/cpu-info.h | 6 ++ arch/mips/include/asm/processor.h | 20 ++++ arch/mips/include/asm/thread_info.h | 2 + arch/mips/include/asm/watch.h | 32 ++++++ arch/mips/kernel/Makefile | 2 +- arch/mips/kernel/watch.c | 188 ++++++++++++++++++++++++++++++++++++ 6 files changed, 249 insertions(+), 1 deletion(-) create mode 100644 arch/mips/include/asm/watch.h create mode 100644 arch/mips/kernel/watch.c (limited to 'arch/mips') diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h index 2de73dbb2e9e..744cd8fb107f 100644 --- a/arch/mips/include/asm/cpu-info.h +++ b/arch/mips/include/asm/cpu-info.h @@ -12,6 +12,8 @@ #ifndef __ASM_CPU_INFO_H #define __ASM_CPU_INFO_H +#include + #include /* @@ -69,6 +71,10 @@ struct cpuinfo_mips { int tc_id; /* Thread Context number */ #endif void *data; /* Additional data */ + unsigned int watch_reg_count; /* Number that exist */ + unsigned int watch_reg_use_cnt; /* Usable by ptrace */ +#define NUM_WATCH_REGS 4 + u16 watch_reg_masks[NUM_WATCH_REGS]; } __attribute__((aligned(SMP_CACHE_BYTES))); extern struct cpuinfo_mips cpu_data[]; diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index a1e4453469f9..18ee58e39445 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -105,6 +105,19 @@ struct mips_dsp_state { {0,} \ } +struct mips3264_watch_reg_state { + /* The width of watchlo is 32 in a 32 bit kernel and 64 in a + 64 bit kernel. We use unsigned long as it has the same + property. */ + unsigned long watchlo[NUM_WATCH_REGS]; + /* Only the mask and IRW bits from watchhi. */ + u16 watchhi[NUM_WATCH_REGS]; +}; + +union mips_watch_reg_state { + struct mips3264_watch_reg_state mips3264; +}; + typedef struct { unsigned long seg; } mm_segment_t; @@ -137,6 +150,9 @@ struct thread_struct { /* Saved state of the DSP ASE, if available. */ struct mips_dsp_state dsp; + /* Saved watch register state, if available. */ + union mips_watch_reg_state watch; + /* Other stuff associated with the thread. */ unsigned long cp0_badvaddr; /* Last user fault */ unsigned long cp0_baduaddr; /* Last kernel fault accessing USEG */ @@ -192,6 +208,10 @@ struct thread_struct { .dspr = {0, }, \ .dspcontrol = 0, \ }, \ + /* \ + * saved watch register stuff \ + */ \ + .watch = {{{0,},},}, \ /* \ * Other stuff associated with the process \ */ \ diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index bb3060699df2..3f76de73c943 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -124,6 +124,7 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define TIF_32BIT_REGS 22 /* also implies 16/32 fprs */ #define TIF_32BIT_ADDR 23 /* 32-bit address space (o32/n32) */ #define TIF_FPUBOUND 24 /* thread bound to FPU-full CPU set */ +#define TIF_LOAD_WATCH 25 /* If set, load watch registers */ #define TIF_SYSCALL_TRACE 31 /* syscall trace active */ #define _TIF_SYSCALL_TRACE (1< + +#include + +void mips_install_watch_registers(void); +void mips_read_watch_registers(void); +void mips_clear_watch_registers(void); +void mips_probe_watch_registers(struct cpuinfo_mips *c); + +#ifdef CONFIG_HARDWARE_WATCHPOINTS +#define __restore_watch() do { \ + if (unlikely(test_bit(TIF_LOAD_WATCH, \ + ¤t_thread_info()->flags))) { \ + mips_install_watch_registers(); \ + } \ +} while (0) + +#else +#define __restore_watch() do {} while (0) +#endif + +#endif /* _ASM_WATCH_H */ diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 25775cb54000..d9da7112aaf8 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -6,7 +6,7 @@ extra-y := head.o init_task.o vmlinux.lds obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ ptrace.o reset.o setup.o signal.o syscall.o \ - time.o topology.o traps.o unaligned.o + time.o topology.o traps.o unaligned.o watch.o obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o diff --git a/arch/mips/kernel/watch.c b/arch/mips/kernel/watch.c new file mode 100644 index 000000000000..c15406968030 --- /dev/null +++ b/arch/mips/kernel/watch.c @@ -0,0 +1,188 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 David Daney + */ + +#include + +#include +#include + +/* + * Install the watch registers for the current thread. A maximum of + * four registers are installed although the machine may have more. + */ +void mips_install_watch_registers(void) +{ + struct mips3264_watch_reg_state *watches = + ¤t->thread.watch.mips3264; + switch (current_cpu_data.watch_reg_use_cnt) { + default: + BUG(); + case 4: + write_c0_watchlo3(watches->watchlo[3]); + /* Write 1 to the I, R, and W bits to clear them, and + 1 to G so all ASIDs are trapped. */ + write_c0_watchhi3(0x40000007 | watches->watchhi[3]); + case 3: + write_c0_watchlo2(watches->watchlo[2]); + write_c0_watchhi2(0x40000007 | watches->watchhi[2]); + case 2: + write_c0_watchlo1(watches->watchlo[1]); + write_c0_watchhi1(0x40000007 | watches->watchhi[1]); + case 1: + write_c0_watchlo0(watches->watchlo[0]); + write_c0_watchhi0(0x40000007 | watches->watchhi[0]); + } +} + +/* + * Read back the watchhi registers so the user space debugger has + * access to the I, R, and W bits. A maximum of four registers are + * read although the machine may have more. + */ +void mips_read_watch_registers(void) +{ + struct mips3264_watch_reg_state *watches = + ¤t->thread.watch.mips3264; + switch (current_cpu_data.watch_reg_use_cnt) { + default: + BUG(); + case 4: + watches->watchhi[3] = (read_c0_watchhi3() & 0x0fff); + case 3: + watches->watchhi[2] = (read_c0_watchhi2() & 0x0fff); + case 2: + watches->watchhi[1] = (read_c0_watchhi1() & 0x0fff); + case 1: + watches->watchhi[0] = (read_c0_watchhi0() & 0x0fff); + } + if (current_cpu_data.watch_reg_use_cnt == 1 && + (watches->watchhi[0] & 7) == 0) { + /* Pathological case of release 1 architecture that + * doesn't set the condition bits. We assume that + * since we got here, the watch condition was met and + * signal that the conditions requested in watchlo + * were met. */ + watches->watchhi[0] |= (watches->watchlo[0] & 7); + } + } + +/* + * Disable all watch registers. Although only four registers are + * installed, all are cleared to eliminate the possibility of endless + * looping in the watch handler. + */ +void mips_clear_watch_registers(void) +{ + switch (current_cpu_data.watch_reg_count) { + default: + BUG(); + case 8: + write_c0_watchlo7(0); + case 7: + write_c0_watchlo6(0); + case 6: + write_c0_watchlo5(0); + case 5: + write_c0_watchlo4(0); + case 4: + write_c0_watchlo3(0); + case 3: + write_c0_watchlo2(0); + case 2: + write_c0_watchlo1(0); + case 1: + write_c0_watchlo0(0); + } +} + +__cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c) +{ + unsigned int t; + + if ((c->options & MIPS_CPU_WATCH) == 0) + return; + /* + * Check which of the I,R and W bits are supported, then + * disable the register. + */ + write_c0_watchlo0(7); + t = read_c0_watchlo0(); + write_c0_watchlo0(0); + c->watch_reg_masks[0] = t & 7; + + /* Write the mask bits and read them back to determine which + * can be used. */ + c->watch_reg_count = 1; + c->watch_reg_use_cnt = 1; + t = read_c0_watchhi0(); + write_c0_watchhi0(t | 0xff8); + t = read_c0_watchhi0(); + c->watch_reg_masks[0] |= (t & 0xff8); + if ((t & 0x80000000) == 0) + return; + + write_c0_watchlo1(7); + t = read_c0_watchlo1(); + write_c0_watchlo1(0); + c->watch_reg_masks[1] = t & 7; + + c->watch_reg_count = 2; + c->watch_reg_use_cnt = 2; + t = read_c0_watchhi1(); + write_c0_watchhi1(t | 0xff8); + t = read_c0_watchhi1(); + c->watch_reg_masks[1] |= (t & 0xff8); + if ((t & 0x80000000) == 0) + return; + + write_c0_watchlo2(7); + t = read_c0_watchlo2(); + write_c0_watchlo2(0); + c->watch_reg_masks[2] = t & 7; + + c->watch_reg_count = 3; + c->watch_reg_use_cnt = 3; + t = read_c0_watchhi2(); + write_c0_watchhi2(t | 0xff8); + t = read_c0_watchhi2(); + c->watch_reg_masks[2] |= (t & 0xff8); + if ((t & 0x80000000) == 0) + return; + + write_c0_watchlo3(7); + t = read_c0_watchlo3(); + write_c0_watchlo3(0); + c->watch_reg_masks[3] = t & 7; + + c->watch_reg_count = 4; + c->watch_reg_use_cnt = 4; + t = read_c0_watchhi3(); + write_c0_watchhi3(t | 0xff8); + t = read_c0_watchhi3(); + c->watch_reg_masks[3] |= (t & 0xff8); + if ((t & 0x80000000) == 0) + return; + + /* We use at most 4, but probe and report up to 8. */ + c->watch_reg_count = 5; + t = read_c0_watchhi4(); + if ((t & 0x80000000) == 0) + return; + + c->watch_reg_count = 6; + t = read_c0_watchhi5(); + if ((t & 0x80000000) == 0) + return; + + c->watch_reg_count = 7; + t = read_c0_watchhi6(); + if ((t & 0x80000000) == 0) + return; + + c->watch_reg_count = 8; +} -- cgit v1.2.3 From 654f57bfb467996fb730eae96dc30ea4de989fdc Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 23 Sep 2008 00:07:16 -0700 Subject: MIPS: Probe watch registers and report configuration. Probe for watch register characteristics, and report them in /proc/cpuinfo. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 2 ++ arch/mips/kernel/proc.c | 13 +++++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index e621fda8ab37..0cf15457ecac 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -21,6 +21,7 @@ #include #include #include +#include /* * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, @@ -677,6 +678,7 @@ static inline void spram_config(void) {} static inline void cpu_probe_mips(struct cpuinfo_mips *c) { decode_configs(c); + mips_probe_watch_registers(c); switch (c->processor_id & 0xff00) { case PRID_IMP_4KC: c->cputype = CPU_4KC; diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 36f065398243..75bb1300dd7a 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -23,6 +23,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) unsigned int version = cpu_data[n].processor_id; unsigned int fp_vers = cpu_data[n].fpu_id; char fmt [64]; + int i; #ifdef CONFIG_SMP if (!cpu_isset(n, cpu_online_map)) @@ -50,8 +51,16 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "tlb_entries\t\t: %d\n", cpu_data[n].tlbsize); seq_printf(m, "extra interrupt vector\t: %s\n", cpu_has_divec ? "yes" : "no"); - seq_printf(m, "hardware watchpoint\t: %s\n", - cpu_has_watch ? "yes" : "no"); + seq_printf(m, "hardware watchpoint\t: %s", + cpu_has_watch ? "yes, " : "no\n"); + if (cpu_has_watch) { + seq_printf(m, "count: %d, address/irw mask: [", + cpu_data[n].watch_reg_count); + for (i = 0; i < cpu_data[n].watch_reg_count; i++) + seq_printf(m, "%s0x%04x", i ? ", " : "" , + cpu_data[n].watch_reg_masks[i]); + seq_printf(m, "]\n"); + } seq_printf(m, "ASEs implemented\t:%s%s%s%s%s%s\n", cpu_has_mips16 ? " mips16" : "", cpu_has_mdmx ? " mdmx" : "", -- cgit v1.2.3 From b67b2b703047bfaf62687ca64c9486599b609ef0 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 23 Sep 2008 00:08:45 -0700 Subject: MIPS: Watch exception handling for HARDWARE_WATCHPOINTS. Here we hook up the watch exception handler so that it sends SIGTRAP when the hardware watch registers are triggered. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/kernel/genex.S | 4 ++++ arch/mips/kernel/traps.c | 24 +++++++++++++++++++----- 2 files changed, 23 insertions(+), 5 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 01dcbe38fa01..757d48f0d80f 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -453,7 +453,11 @@ NESTED(nmi_handler, PT_SIZE, sp) BUILD_HANDLER tr tr sti silent /* #13 */ BUILD_HANDLER fpe fpe fpe silent /* #15 */ BUILD_HANDLER mdmx mdmx sti silent /* #22 */ +#ifdef CONFIG_HARDWARE_WATCHPOINTS + BUILD_HANDLER watch watch sti silent /* #23 */ +#else BUILD_HANDLER watch watch sti verbose /* #23 */ +#endif BUILD_HANDLER mcheck mcheck cli verbose /* #24 */ BUILD_HANDLER mt mt sti silent /* #25 */ BUILD_HANDLER dsp dsp sti silent /* #26 */ diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index b602ac6eb47d..80b9e070c207 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include #include @@ -912,13 +913,26 @@ asmlinkage void do_mdmx(struct pt_regs *regs) asmlinkage void do_watch(struct pt_regs *regs) { + u32 cause; + /* - * We use the watch exception where available to detect stack - * overflows. + * Clear WP (bit 22) bit of cause register so we don't loop + * forever. */ - dump_tlb_all(); - show_regs(regs); - panic("Caught WATCH exception - probably caused by stack overflow."); + cause = read_c0_cause(); + cause &= ~(1 << 22); + write_c0_cause(cause); + + /* + * If the current thread has the watch registers loaded, save + * their values and send SIGTRAP. Otherwise another thread + * left the registers set, clear them and continue. + */ + if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) { + mips_read_watch_registers(); + force_sig(SIGTRAP, current); + } else + mips_clear_watch_registers(); } asmlinkage void do_mcheck(struct pt_regs *regs) -- cgit v1.2.3 From 2c708cbaa6031b73be6b992adb3ec1811f91cdb1 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 23 Sep 2008 00:09:51 -0700 Subject: MIPS: Scheduler support for HARDWARE_WATCHPOINTS. Here we hook up the scheduler. Whenever we switch to a new process, we check to see if the watch registers should be installed, and do it if needed. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/system.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h index a944eda4faf5..cd30f83235bb 100644 --- a/arch/mips/include/asm/system.h +++ b/arch/mips/include/asm/system.h @@ -20,6 +20,7 @@ #include #include #include +#include #include @@ -76,6 +77,7 @@ do { \ __restore_dsp(current); \ if (cpu_has_userlocal) \ write_c0_userlocal(current_thread_info()->tp_value); \ + __restore_watch(); \ } while (0) static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) -- cgit v1.2.3 From 0926bf953ee79b8f139741b442e5a18520f81705 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 23 Sep 2008 00:11:26 -0700 Subject: MIPS: Ptrace support for HARDWARE_WATCHPOINTS This is the final part of the watch register patch. Here we hook up ptrace so that the user space debugger (gdb), can set and read the registers. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/ptrace.h | 46 +++++++++++++++++++ arch/mips/kernel/ptrace.c | 100 ++++++++++++++++++++++++++++++++++++++++- arch/mips/kernel/ptrace32.c | 10 +++++ 3 files changed, 155 insertions(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index c00cca24dae0..cd5e8a47812b 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -74,11 +74,57 @@ struct pt_regs { #define PTRACE_POKEDATA_3264 0xc3 #define PTRACE_GET_THREAD_AREA_3264 0xc4 +/* Read and write watchpoint registers. */ +enum pt_watch_style { + pt_watch_style_mips32, + pt_watch_style_mips64 +}; +struct mips32_watch_regs { + uint32_t watchlo[8]; + /* Lower 16 bits of watchhi. */ + uint16_t watchhi[8]; + /* Valid mask and I R W bits. + * bit 0 -- 1 if W bit is usable. + * bit 1 -- 1 if R bit is usable. + * bit 2 -- 1 if I bit is usable. + * bits 3 - 11 -- Valid watchhi mask bits. + */ + uint16_t watch_masks[8]; + /* The number of valid watch register pairs. */ + uint32_t num_valid; +} __attribute__((aligned(8))); + +struct mips64_watch_regs { + uint64_t watchlo[8]; + uint16_t watchhi[8]; + uint16_t watch_masks[8]; + uint32_t num_valid; +} __attribute__((aligned(8))); + +struct pt_watch_regs { + enum pt_watch_style style; + union { + struct mips32_watch_regs mips32; + struct mips32_watch_regs mips64; + }; +}; + +#define PTRACE_GET_WATCH_REGS 0xd0 +#define PTRACE_SET_WATCH_REGS 0xd1 + #ifdef __KERNEL__ +#include #include #include +struct task_struct; + +extern int ptrace_get_watch_regs(struct task_struct *child, + struct pt_watch_regs __user *addr); +extern int ptrace_set_watch_regs(struct task_struct *child, + struct pt_watch_regs __user *addr); + /* * Does the process account for user or for system time? */ diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 96ffc9c6d194..054861ccb4dd 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -46,7 +46,8 @@ */ void ptrace_disable(struct task_struct *child) { - /* Nothing to do.. */ + /* Don't load the watchpoint registers for the ex-child. */ + clear_tsk_thread_flag(child, TIF_LOAD_WATCH); } /* @@ -167,6 +168,93 @@ int ptrace_setfpregs(struct task_struct *child, __u32 __user *data) return 0; } +int ptrace_get_watch_regs(struct task_struct *child, + struct pt_watch_regs __user *addr) +{ + enum pt_watch_style style; + int i; + + if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0) + return -EIO; + if (!access_ok(VERIFY_WRITE, addr, sizeof(struct pt_watch_regs))) + return -EIO; + +#ifdef CONFIG_32BIT + style = pt_watch_style_mips32; +#define WATCH_STYLE mips32 +#else + style = pt_watch_style_mips64; +#define WATCH_STYLE mips64 +#endif + + __put_user(style, &addr->style); + __put_user(current_cpu_data.watch_reg_use_cnt, + &addr->WATCH_STYLE.num_valid); + for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { + __put_user(child->thread.watch.mips3264.watchlo[i], + &addr->WATCH_STYLE.watchlo[i]); + __put_user(child->thread.watch.mips3264.watchhi[i] & 0xfff, + &addr->WATCH_STYLE.watchhi[i]); + __put_user(current_cpu_data.watch_reg_masks[i], + &addr->WATCH_STYLE.watch_masks[i]); + } + for (; i < 8; i++) { + __put_user(0, &addr->WATCH_STYLE.watchlo[i]); + __put_user(0, &addr->WATCH_STYLE.watchhi[i]); + __put_user(0, &addr->WATCH_STYLE.watch_masks[i]); + } + + return 0; +} + +int ptrace_set_watch_regs(struct task_struct *child, + struct pt_watch_regs __user *addr) +{ + int i; + int watch_active = 0; + unsigned long lt[NUM_WATCH_REGS]; + u16 ht[NUM_WATCH_REGS]; + + if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0) + return -EIO; + if (!access_ok(VERIFY_READ, addr, sizeof(struct pt_watch_regs))) + return -EIO; + /* Check the values. */ + for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { + __get_user(lt[i], &addr->WATCH_STYLE.watchlo[i]); +#ifdef CONFIG_32BIT + if (lt[i] & __UA_LIMIT) + return -EINVAL; +#else + if (test_tsk_thread_flag(child, TIF_32BIT_ADDR)) { + if (lt[i] & 0xffffffff80000000UL) + return -EINVAL; + } else { + if (lt[i] & __UA_LIMIT) + return -EINVAL; + } +#endif + __get_user(ht[i], &addr->WATCH_STYLE.watchhi[i]); + if (ht[i] & ~0xff8) + return -EINVAL; + } + /* Install them. */ + for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { + if (lt[i] & 7) + watch_active = 1; + child->thread.watch.mips3264.watchlo[i] = lt[i]; + /* Set the G bit. */ + child->thread.watch.mips3264.watchhi[i] = ht[i]; + } + + if (watch_active) + set_tsk_thread_flag(child, TIF_LOAD_WATCH); + else + clear_tsk_thread_flag(child, TIF_LOAD_WATCH); + + return 0; +} + long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int ret; @@ -440,6 +528,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) (unsigned long __user *) data); break; + case PTRACE_GET_WATCH_REGS: + ret = ptrace_get_watch_regs(child, + (struct pt_watch_regs __user *) addr); + break; + + case PTRACE_SET_WATCH_REGS: + ret = ptrace_set_watch_regs(child, + (struct pt_watch_regs __user *) addr); + break; + default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c index cac56a8c8679..e45105e3ef00 100644 --- a/arch/mips/kernel/ptrace32.c +++ b/arch/mips/kernel/ptrace32.c @@ -387,6 +387,16 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, (unsigned long __user *) (unsigned long) data); break; + case PTRACE_GET_WATCH_REGS: + ret = ptrace_get_watch_regs(child, + (struct pt_watch_regs __user *) (unsigned long) addr); + break; + + case PTRACE_SET_WATCH_REGS: + ret = ptrace_set_watch_regs(child, + (struct pt_watch_regs __user *) (unsigned long) addr); + break; + default: ret = ptrace_request(child, request, addr, data); break; -- cgit v1.2.3 From d302d05cf4d25f4fbbec0f9338fac13ee0c0ad89 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 11 Oct 2008 16:18:57 +0100 Subject: MIPS: Move ptrace prototypes to ptrace.h Signed-off-by: Ralf Baechle --- arch/mips/include/asm/ptrace.h | 6 ++++++ arch/mips/kernel/ptrace32.c | 6 ------ 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index cd5e8a47812b..9c22571b160d 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -120,6 +120,12 @@ struct pt_watch_regs { struct task_struct; +extern int ptrace_getregs(struct task_struct *child, __s64 __user *data); +extern int ptrace_setregs(struct task_struct *child, __s64 __user *data); + +extern int ptrace_getfpregs(struct task_struct *child, __u32 __user *data); +extern int ptrace_setfpregs(struct task_struct *child, __u32 __user *data); + extern int ptrace_get_watch_regs(struct task_struct *child, struct pt_watch_regs __user *addr); extern int ptrace_set_watch_regs(struct task_struct *child, diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c index e45105e3ef00..1ca34104e593 100644 --- a/arch/mips/kernel/ptrace32.c +++ b/arch/mips/kernel/ptrace32.c @@ -37,12 +37,6 @@ #include #include -int ptrace_getregs(struct task_struct *child, __s64 __user *data); -int ptrace_setregs(struct task_struct *child, __s64 __user *data); - -int ptrace_getfpregs(struct task_struct *child, __u32 __user *data); -int ptrace_setfpregs(struct task_struct *child, __u32 __user *data); - /* * Tracing a 32-bit process with a 64-bit strace and vice versa will not * work. I don't know how to fix this. -- cgit v1.2.3 From 9609e74093abd9f61fb1d20a8915a8ea87c77d5a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 11 Sep 2008 17:48:00 +0200 Subject: MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irq This patchs defines the number of built-in the GPIOs present on the SoC as Documentation/gpio.txt recommends to do. Define irq_to_gpio/gpio_to_irq to return the right values so that it fixes a compilation error on drivers/gpio/gpiolib.c when enabling debugfs. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-rc32434/gpio.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h index 3a70b41cd7a5..c8e554eafce3 100644 --- a/arch/mips/include/asm/mach-rc32434/gpio.h +++ b/arch/mips/include/asm/mach-rc32434/gpio.h @@ -14,16 +14,16 @@ #define _RC32434_GPIO_H_ #include +#include -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value - -#define gpio_cansleep __gpio_cansleep +#define NR_BUILTIN_GPIO 32 -#define gpio_to_irq(gpio) IRQ_GPIO(gpio) -#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep -#include +#define gpio_to_irq(gpio) (8 + 4 * 32 + gpio) +#define irq_to_gpio(irq) (irq - (8 + 4 * 32)) struct rb532_gpio_reg { u32 gpiofunc; /* GPIO Function Register -- cgit v1.2.3