From ca6fafd183d6d687a7957e5328ecefc785f22a5a Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 11 Jan 2016 10:07:49 +1000 Subject: m68knommu: fix FEC platform device registration when driver is modular The FEC (Fast Ethernet Crontroller) module on many ColdFire parts can be compiled into the kernel, or as a module. Therefore the platform device support for it is required whenever the driver is enabled - not just when built into the kernel. Use IS_ENABLED(CONFIG_FEC) instead of a conditional check on only the driver being built into the kernel. Signed-off-by: Greg Ungerer Acked-by: Geert Uytterhoeven --- arch/m68k/coldfire/device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/m68k') diff --git a/arch/m68k/coldfire/device.c b/arch/m68k/coldfire/device.c index 71ea4c02795d..a0fc0c192427 100644 --- a/arch/m68k/coldfire/device.c +++ b/arch/m68k/coldfire/device.c @@ -89,7 +89,7 @@ static struct platform_device mcf_uart = { .dev.platform_data = mcf_uart_platform_data, }; -#ifdef CONFIG_FEC +#if IS_ENABLED(CONFIG_FEC) #ifdef CONFIG_M5441x #define FEC_NAME "enet-fec" @@ -329,7 +329,7 @@ static struct platform_device mcf_qspi = { static struct platform_device *mcf_devices[] __initdata = { &mcf_uart, -#ifdef CONFIG_FEC +#if IS_ENABLED(CONFIG_FEC) &mcf_fec0, #ifdef MCFFEC_BASE1 &mcf_fec1, -- cgit v1.2.3 From a3595962d82495f51a80feb19dcdb135556a9527 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 25 Feb 2016 22:59:13 +1000 Subject: m68knommu: remove obsolete 68360 support Remove the obsolete Motorola/Freescale 68360 SoC support. It has been bit rotting for many years with little active use in mainlne. There has been no serial driver support for many years, so it is largely not useful in its current state. Signed-off-by: Greg Ungerer --- arch/m68k/68360/Makefile | 12 - arch/m68k/68360/commproc.c | 309 ---------------- arch/m68k/68360/config.c | 169 --------- arch/m68k/68360/entry.S | 164 --------- arch/m68k/68360/head-ram.S | 402 --------------------- arch/m68k/68360/head-rom.S | 413 ---------------------- arch/m68k/68360/ints.c | 138 -------- arch/m68k/Kconfig.cpu | 7 - arch/m68k/Kconfig.debug | 2 +- arch/m68k/Kconfig.machine | 6 - arch/m68k/Makefile | 3 - arch/m68k/include/asm/commproc.h | 664 ----------------------------------- arch/m68k/include/asm/m68360.h | 13 - arch/m68k/include/asm/m68360_enet.h | 177 ---------- arch/m68k/include/asm/m68360_pram.h | 431 ----------------------- arch/m68k/include/asm/m68360_quicc.h | 362 ------------------- arch/m68k/include/asm/m68360_regs.h | 408 --------------------- arch/m68k/kernel/early_printk.c | 8 +- arch/m68k/kernel/setup_no.c | 7 - 19 files changed, 5 insertions(+), 3690 deletions(-) delete mode 100644 arch/m68k/68360/Makefile delete mode 100644 arch/m68k/68360/commproc.c delete mode 100644 arch/m68k/68360/config.c delete mode 100644 arch/m68k/68360/entry.S delete mode 100644 arch/m68k/68360/head-ram.S delete mode 100644 arch/m68k/68360/head-rom.S delete mode 100644 arch/m68k/68360/ints.c delete mode 100644 arch/m68k/include/asm/commproc.h delete mode 100644 arch/m68k/include/asm/m68360.h delete mode 100644 arch/m68k/include/asm/m68360_enet.h delete mode 100644 arch/m68k/include/asm/m68360_pram.h delete mode 100644 arch/m68k/include/asm/m68360_quicc.h delete mode 100644 arch/m68k/include/asm/m68360_regs.h (limited to 'arch/m68k') diff --git a/arch/m68k/68360/Makefile b/arch/m68k/68360/Makefile deleted file mode 100644 index 591ce42df3de..000000000000 --- a/arch/m68k/68360/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for 68360 machines. -# -model-y := ram -model-$(CONFIG_ROMKERNEL) := rom - -obj-y := config.o commproc.o entry.o ints.o - -extra-y := head.o - -$(obj)/head.o: $(obj)/head-$(model-y).o - ln -sf head-$(model-y).o $(obj)/head.o diff --git a/arch/m68k/68360/commproc.c b/arch/m68k/68360/commproc.c deleted file mode 100644 index 14d7f35cd37b..000000000000 --- a/arch/m68k/68360/commproc.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * General Purpose functions for the global management of the - * Communication Processor Module. - * - * Copyright (c) 2000 Michael Leslie - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * In addition to the individual control of the communication - * channels, there are a few functions that globally affect the - * communication processor. - * - * Buffer descriptors must be allocated from the dual ported memory - * space. The allocator for that is here. When the communication - * process is reset, we reclaim the memory available. There is - * currently no deallocator for this memory. - * The amount of space available is platform dependent. On the - * MBX, the EPPC software loads additional microcode into the - * communication processor, and uses some of the DP ram for this - * purpose. Current, the first 512 bytes and the last 256 bytes of - * memory are used. Right now I am conservative and only use the - * memory that can never be used for microcode. If there are - * applications that require more DP ram, we can expand the boundaries - * but then we have to be careful of any downloaded microcode. - * - */ - -/* - * Michael Leslie - * adapted Dan Malek's ppc8xx drivers to M68360 - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* #include */ -/* #include */ -extern void *_quicc_base; -extern unsigned int system_clock; - - -static uint dp_alloc_base; /* Starting offset in DP ram */ -static uint dp_alloc_top; /* Max offset + 1 */ - -#if 0 -static void *host_buffer; /* One page of host buffer */ -static void *host_end; /* end + 1 */ -#endif - -/* struct cpm360_t *cpmp; */ /* Pointer to comm processor space */ - -QUICC *pquicc; -/* QUICC *quicc_dpram; */ /* mleslie - temporary; use extern pquicc elsewhere instead */ - - -/* CPM interrupt vector functions. */ -struct cpm_action { - irq_handler_t handler; - void *dev_id; -}; -static struct cpm_action cpm_vecs[CPMVEC_NR]; -static void cpm_interrupt(int irq, void * dev, struct pt_regs * regs); -static void cpm_error_interrupt(void *); - -/* prototypes: */ -void cpm_install_handler(int vec, irq_handler_t handler, void *dev_id); -void m360_cpm_reset(void); - - - - -void __init m360_cpm_reset() -{ -/* pte_t *pte; */ - - pquicc = (struct quicc *)(_quicc_base); /* initialized in crt0_rXm.S */ - - /* Perform a CPM reset. */ - pquicc->cp_cr = (SOFTWARE_RESET | CMD_FLAG); - - /* Wait for CPM to become ready (should be 2 clocks). */ - while (pquicc->cp_cr & CMD_FLAG); - - /* On the recommendation of the 68360 manual, p. 7-60 - * - Set sdma interrupt service mask to 7 - * - Set sdma arbitration ID to 4 - */ - pquicc->sdma_sdcr = 0x0740; - - - /* Claim the DP memory for our use. - */ - dp_alloc_base = CPM_DATAONLY_BASE; - dp_alloc_top = dp_alloc_base + CPM_DATAONLY_SIZE; - - - /* Set the host page for allocation. - */ - /* host_buffer = host_page_addr; */ - /* host_end = host_page_addr + PAGE_SIZE; */ - - /* pte = find_pte(&init_mm, host_page_addr); */ - /* pte_val(*pte) |= _PAGE_NO_CACHE; */ - /* flush_tlb_page(current->mm->mmap, host_buffer); */ - - /* Tell everyone where the comm processor resides. - */ -/* cpmp = (cpm360_t *)commproc; */ -} - - -/* This is called during init_IRQ. We used to do it above, but this - * was too early since init_IRQ was not yet called. - */ -void -cpm_interrupt_init(void) -{ - /* Initialize the CPM interrupt controller. - * NOTE THAT pquicc had better have been initialized! - * reference: MC68360UM p. 7-377 - */ - pquicc->intr_cicr = - (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) | - (CPM_INTERRUPT << 13) | - CICR_HP_MASK | - (CPM_VECTOR_BASE << 5) | - CICR_SPS; - - /* mask all CPM interrupts from reaching the cpu32 core: */ - pquicc->intr_cimr = 0; - - - /* mles - If I understand correctly, the 360 just pops over to the CPM - * specific vector, obviating the necessity to vector through the IRQ - * whose priority the CPM is set to. This needs a closer look, though. - */ - - /* Set our interrupt handler with the core CPU. */ -/* if (request_irq(CPM_INTERRUPT, cpm_interrupt, 0, "cpm", NULL) != 0) */ -/* panic("Could not allocate CPM IRQ!"); */ - - /* Install our own error handler. - */ - /* I think we want to hold off on this one for the moment - mles */ - /* cpm_install_handler(CPMVEC_ERROR, cpm_error_interrupt, NULL); */ - - /* master CPM interrupt enable */ - /* pquicc->intr_cicr |= CICR_IEN; */ /* no such animal for 360 */ -} - - - -/* CPM interrupt controller interrupt. -*/ -static void -cpm_interrupt(int irq, void * dev, struct pt_regs * regs) -{ - /* uint vec; */ - - /* mles: Note that this stuff is currently being performed by - * M68360_do_irq(int vec, struct pt_regs *fp), in ../ints.c */ - - /* figure out the vector */ - /* call that vector's handler */ - /* clear the irq's bit in the service register */ - -#if 0 /* old 860 stuff: */ - /* Get the vector by setting the ACK bit and then reading - * the register. - */ - ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr = 1; - vec = ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr; - vec >>= 11; - - - if (cpm_vecs[vec].handler != 0) - (*cpm_vecs[vec].handler)(cpm_vecs[vec].dev_id); - else - ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec); - - /* After servicing the interrupt, we have to remove the status - * indicator. - */ - ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr |= (1 << vec); -#endif - -} - -/* The CPM can generate the error interrupt when there is a race condition - * between generating and masking interrupts. All we have to do is ACK it - * and return. This is a no-op function so we don't need any special - * tests in the interrupt handler. - */ -static void -cpm_error_interrupt(void *dev) -{ -} - -/* Install a CPM interrupt handler. -*/ -void -cpm_install_handler(int vec, irq_handler_t handler, void *dev_id) -{ - - request_irq(vec, handler, 0, "timer", dev_id); - -/* if (cpm_vecs[vec].handler != 0) */ -/* printk(KERN_INFO "CPM interrupt %x replacing %x\n", */ -/* (uint)handler, (uint)cpm_vecs[vec].handler); */ -/* cpm_vecs[vec].handler = handler; */ -/* cpm_vecs[vec].dev_id = dev_id; */ - - /* ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr |= (1 << vec); */ -/* pquicc->intr_cimr |= (1 << vec); */ - -} - -/* Free a CPM interrupt handler. -*/ -void -cpm_free_handler(int vec) -{ - cpm_vecs[vec].handler = NULL; - cpm_vecs[vec].dev_id = NULL; - /* ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec); */ - pquicc->intr_cimr &= ~(1 << vec); -} - - - - -/* Allocate some memory from the dual ported ram. We may want to - * enforce alignment restrictions, but right now everyone is a good - * citizen. - */ -uint -m360_cpm_dpalloc(uint size) -{ - uint retloc; - - if ((dp_alloc_base + size) >= dp_alloc_top) - return(CPM_DP_NOSPACE); - - retloc = dp_alloc_base; - dp_alloc_base += size; - - return(retloc); -} - - -#if 0 /* mleslie - for now these are simply kmalloc'd */ -/* We also own one page of host buffer space for the allocation of - * UART "fifos" and the like. - */ -uint -m360_cpm_hostalloc(uint size) -{ - uint retloc; - - if ((host_buffer + size) >= host_end) - return(0); - - retloc = host_buffer; - host_buffer += size; - - return(retloc); -} -#endif - - -/* Set a baud rate generator. This needs lots of work. There are - * four BRGs, any of which can be wired to any channel. - * The internal baud rate clock is the system clock divided by 16. - * This assumes the baudrate is 16x oversampled by the uart. - */ -/* #define BRG_INT_CLK (((bd_t *)__res)->bi_intfreq * 1000000) */ -#define BRG_INT_CLK system_clock -#define BRG_UART_CLK (BRG_INT_CLK/16) - -void -m360_cpm_setbrg(uint brg, uint rate) -{ - volatile uint *bp; - - /* This is good enough to get SMCs running..... - */ - /* bp = (uint *)&cpmp->cp_brgc1; */ - bp = (volatile uint *)(&pquicc->brgc[0].l); - bp += brg; - *bp = ((BRG_UART_CLK / rate - 1) << 1) | CPM_BRG_EN; -} - - -/* - * Local variables: - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * End: - */ diff --git a/arch/m68k/68360/config.c b/arch/m68k/68360/config.c deleted file mode 100644 index b65fe4eed38e..000000000000 --- a/arch/m68k/68360/config.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * config.c - non-mmu 68360 platform initialization code - * - * Copyright (c) 2000 Michael Leslie - * Copyright (C) 1993 Hamish Macdonald - * Copyright (C) 1999 D. Jeff Dionne - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#ifdef CONFIG_UCQUICC -#include -#endif - -extern void m360_cpm_reset(void); - -// Mask to select if the PLL prescaler is enabled. -#define MCU_PREEN ((unsigned short)(0x0001 << 13)) - -#if defined(CONFIG_UCQUICC) -#define OSCILLATOR (unsigned long int)33000000 -#endif - -static irq_handler_t timer_interrupt; -unsigned long int system_clock; - -extern QUICC *pquicc; - -/* TODO DON"T Hard Code this */ -/* calculate properly using the right PLL and prescaller */ -// unsigned int system_clock = 33000000l; -extern unsigned long int system_clock; //In kernel setup.c - - -static irqreturn_t hw_tick(int irq, void *dummy) -{ - /* Reset Timer1 */ - /* TSTAT &= 0; */ - - pquicc->timer_ter1 = 0x0002; /* clear timer event */ - - return timer_interrupt(irq, dummy); -} - -static struct irqaction m68360_timer_irq = { - .name = "timer", - .flags = IRQF_TIMER, - .handler = hw_tick, -}; - -void hw_timer_init(irq_handler_t handler) -{ - unsigned char prescaler; - unsigned short tgcr_save; - -#if 0 - /* Restart mode, Enable int, 32KHz, Enable timer */ - TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN; - /* Set prescaler (Divide 32KHz by 32)*/ - TPRER = 31; - /* Set compare register 32Khz / 32 / 10 = 100 */ - TCMP = 10; - - request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL); -#endif - - /* General purpose quicc timers: MC68360UM p7-20 */ - - /* Set up timer 1 (in [1..4]) to do 100Hz */ - tgcr_save = pquicc->timer_tgcr & 0xfff0; - pquicc->timer_tgcr = tgcr_save; /* stop and reset timer 1 */ - /* pquicc->timer_tgcr |= 0x4444; */ /* halt timers when FREEZE (ie bdm freeze) */ - - prescaler = 8; - pquicc->timer_tmr1 = 0x001a | /* or=1, frr=1, iclk=01b */ - (unsigned short)((prescaler - 1) << 8); - - pquicc->timer_tcn1 = 0x0000; /* initial count */ - /* calculate interval for 100Hz based on the _system_clock: */ - pquicc->timer_trr1 = (system_clock/ prescaler) / HZ; /* reference count */ - - pquicc->timer_ter1 = 0x0003; /* clear timer events */ - - timer_interrupt = handler; - - /* enable timer 1 interrupt in CIMR */ - setup_irq(CPMVEC_TIMER1, &m68360_timer_irq); - - /* Start timer 1: */ - tgcr_save = (pquicc->timer_tgcr & 0xfff0) | 0x0001; - pquicc->timer_tgcr = tgcr_save; -} - -void BSP_reset (void) -{ - local_irq_disable(); - asm volatile ( - "moveal #_start, %a0;\n" - "moveb #0, 0xFFFFF300;\n" - "moveal 0(%a0), %sp;\n" - "moveal 4(%a0), %a0;\n" - "jmp (%a0);\n" - ); -} - -unsigned char *scc1_hwaddr; -static int errno; - -#if defined (CONFIG_UCQUICC) -_bsc0(char *, getserialnum) -_bsc1(unsigned char *, gethwaddr, int, a) -_bsc1(char *, getbenv, char *, a) -#endif - - -void __init config_BSP(char *command, int len) -{ - unsigned char *p; - - m360_cpm_reset(); - - /* Calculate the real system clock value. */ - { - unsigned int local_pllcr = (unsigned int)(pquicc->sim_pllcr); - if( local_pllcr & MCU_PREEN ) // If the prescaler is dividing by 128 - { - int mf = (int)(pquicc->sim_pllcr & 0x0fff); - system_clock = (OSCILLATOR / 128) * (mf + 1); - } - else - { - int mf = (int)(pquicc->sim_pllcr & 0x0fff); - system_clock = (OSCILLATOR) * (mf + 1); - } - } - - printk(KERN_INFO "\n68360 QUICC support (C) 2000 Lineo Inc.\n"); - -#if defined(CONFIG_UCQUICC) && 0 - printk(KERN_INFO "uCquicc serial string [%s]\n",getserialnum()); - p = scc1_hwaddr = gethwaddr(0); - printk(KERN_INFO "uCquicc hwaddr %pM\n", p); - - p = getbenv("APPEND"); - if (p) - strcpy(p,command); - else - command[0] = 0; -#else - scc1_hwaddr = "\00\01\02\03\04\05"; -#endif - - mach_reset = BSP_reset; -} diff --git a/arch/m68k/68360/entry.S b/arch/m68k/68360/entry.S deleted file mode 100644 index 22eb3022f9ee..000000000000 --- a/arch/m68k/68360/entry.S +++ /dev/null @@ -1,164 +0,0 @@ -/* - * entry.S - non-mmu 68360 interrupt and exceptions entry points - * - * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright (C) 2001 SED Systems, a Division of Calian Ltd. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file README.legal in the main directory of this archive - * for more details. - * - * Linux/m68k support by Hamish Macdonald - * M68360 Port by SED Systems, and Lineo. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -.text - -.globl system_call -.globl resume -.globl ret_from_exception -.globl ret_from_signal -.globl sys_call_table -.globl bad_interrupt -.globl inthandler - -badsys: - movel #-ENOSYS,%sp@(PT_OFF_D0) - jra ret_from_exception - -do_trace: - movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/ - subql #4,%sp - SAVE_SWITCH_STACK - jbsr syscall_trace_enter - RESTORE_SWITCH_STACK - addql #4,%sp - movel %sp@(PT_OFF_ORIG_D0),%d1 - movel #-ENOSYS,%d0 - cmpl #NR_syscalls,%d1 - jcc 1f - lsl #2,%d1 - lea sys_call_table, %a0 - jbsr %a0@(%d1) - -1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */ - subql #4,%sp /* dummy return address */ - SAVE_SWITCH_STACK - jbsr syscall_trace_leave - -ret_from_signal: - RESTORE_SWITCH_STACK - addql #4,%sp - jra ret_from_exception - -ENTRY(system_call) - SAVE_ALL_SYS - - /* save top of frame*/ - pea %sp@ - jbsr set_esp0 - addql #4,%sp - - movel %sp@(PT_OFF_ORIG_D0),%d0 - - movel %sp,%d1 /* get thread_info pointer */ - andl #-THREAD_SIZE,%d1 - movel %d1,%a2 - btst #(TIF_SYSCALL_TRACE%8),%a2@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8) - jne do_trace - cmpl #NR_syscalls,%d0 - jcc badsys - lsl #2,%d0 - lea sys_call_table,%a0 - movel %a0@(%d0), %a0 - jbsr %a0@ - movel %d0,%sp@(PT_OFF_D0) /* save the return value*/ - -ret_from_exception: - btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel*/ - jeq Luser_return /* if so, skip resched, signals*/ - -Lkernel_return: - RESTORE_ALL - -Luser_return: - /* only allow interrupts when we are really the last one on the*/ - /* kernel stack, otherwise stack overflow can occur during*/ - /* heavy interrupt load*/ - andw #ALLOWINT,%sr - - movel %sp,%d1 /* get thread_info pointer */ - andl #-THREAD_SIZE,%d1 - movel %d1,%a2 -1: - move %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */ - jne Lwork_to_do - RESTORE_ALL - -Lwork_to_do: - movel %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */ - btst #TIF_NEED_RESCHED,%d1 - jne reschedule - -Lsignal_return: - subql #4,%sp /* dummy return address*/ - SAVE_SWITCH_STACK - pea %sp@(SWITCH_STACK_SIZE) - bsrw do_notify_resume - addql #4,%sp - RESTORE_SWITCH_STACK - addql #4,%sp - jra 1b - -/* - * This is the main interrupt handler, responsible for calling do_IRQ() - */ -inthandler: - SAVE_ALL_INT - movew %sp@(PT_OFF_FORMATVEC), %d0 - and.l #0x3ff, %d0 - lsr.l #0x02, %d0 - - movel %sp,%sp@- - movel %d0,%sp@- /* put vector # on stack*/ - jbsr do_IRQ /* process the IRQ */ - addql #8,%sp /* pop parameters off stack*/ - jra ret_from_exception - -/* - * Handler for uninitialized and spurious interrupts. - */ -bad_interrupt: - addql #1,irq_err_count - rte - -/* - * Beware - when entering resume, prev (the current task) is - * in a0, next (the new task) is in a1, so don't change these - * registers until their contents are no longer needed. - */ -ENTRY(resume) - movel %a0,%d1 /* save prev thread in d1 */ - movew %sr,%a0@(TASK_THREAD+THREAD_SR) /* save sr */ - SAVE_SWITCH_STACK - movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */ - movel %usp,%a3 /* save usp */ - movel %a3,%a0@(TASK_THREAD+THREAD_USP) - - movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore user stack */ - movel %a3,%usp - movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */ - RESTORE_SWITCH_STACK - movew %a1@(TASK_THREAD+THREAD_SR),%sr /* restore thread status reg */ - rts - diff --git a/arch/m68k/68360/head-ram.S b/arch/m68k/68360/head-ram.S deleted file mode 100644 index 62bc56f41d57..000000000000 --- a/arch/m68k/68360/head-ram.S +++ /dev/null @@ -1,402 +0,0 @@ -/* - * head-ram.S - startup code for Motorola 68360 - * - * Copyright 2001 (C) SED Systems, a Division of Calian Ltd. - * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S - * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7 - * uClinux Kernel - * Copyright (C) Michael Leslie - * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S - * Copyright (C) 1998 D. Jeff Dionne , - * - */ -#define ASSEMBLY - -.global _stext -.global _start - -.global _rambase -.global _ramvec -.global _ramstart -.global _ramend - -.global _quicc_base -.global _periph_base - -#define RAMEND (CONFIG_RAMBASE + CONFIG_RAMSIZE) -#define ROMEND (CONFIG_ROMBASE + CONFIG_ROMSIZE) - -#define REGB 0x1000 -#define PEPAR (_dprbase + REGB + 0x0016) -#define GMR (_dprbase + REGB + 0x0040) -#define OR0 (_dprbase + REGB + 0x0054) -#define BR0 (_dprbase + REGB + 0x0050) -#define OR1 (_dprbase + REGB + 0x0064) -#define BR1 (_dprbase + REGB + 0x0060) -#define OR4 (_dprbase + REGB + 0x0094) -#define BR4 (_dprbase + REGB + 0x0090) -#define OR6 (_dprbase + REGB + 0x00b4) -#define BR6 (_dprbase + REGB + 0x00b0) -#define OR7 (_dprbase + REGB + 0x00c4) -#define BR7 (_dprbase + REGB + 0x00c0) - -#define MCR (_dprbase + REGB + 0x0000) -#define AVR (_dprbase + REGB + 0x0008) - -#define SYPCR (_dprbase + REGB + 0x0022) - -#define PLLCR (_dprbase + REGB + 0x0010) -#define CLKOCR (_dprbase + REGB + 0x000C) -#define CDVCR (_dprbase + REGB + 0x0014) - -#define BKAR (_dprbase + REGB + 0x0030) -#define BKCR (_dprbase + REGB + 0x0034) -#define SWIV (_dprbase + REGB + 0x0023) -#define PICR (_dprbase + REGB + 0x0026) -#define PITR (_dprbase + REGB + 0x002A) - -/* Define for all memory configuration */ -#define MCU_SIM_GMR 0x00000000 -#define SIM_OR_MASK 0x0fffffff - -/* Defines for chip select zero - the flash */ -#define SIM_OR0_MASK 0x20000002 -#define SIM_BR0_MASK 0x00000001 - - -/* Defines for chip select one - the RAM */ -#define SIM_OR1_MASK 0x10000000 -#define SIM_BR1_MASK 0x00000001 - -#define MCU_SIM_MBAR_ADRS 0x0003ff00 -#define MCU_SIM_MBAR_BA_MASK 0xfffff000 -#define MCU_SIM_MBAR_AS_MASK 0x00000001 - -#define MCU_SIM_PEPAR 0x00B4 - -#define MCU_DISABLE_INTRPTS 0x2700 -#define MCU_SIM_AVR 0x00 - -#define MCU_SIM_MCR 0x00005cff - -#define MCU_SIM_CLKOCR 0x00 -#define MCU_SIM_PLLCR 0x8000 -#define MCU_SIM_CDVCR 0x0000 - -#define MCU_SIM_SYPCR 0x0000 -#define MCU_SIM_SWIV 0x00 -#define MCU_SIM_PICR 0x0000 -#define MCU_SIM_PITR 0x0000 - - -#include - - -/* - * By the time this RAM specific code begins to execute, DPRAM - * and DRAM should already be mapped and accessible. - */ - - .text -_start: -_stext: - nop - ori.w #MCU_DISABLE_INTRPTS, %sr /* disable interrupts: */ - /* We should not need to setup the boot stack the reset should do it. */ - movea.l #RAMEND, %sp /*set up stack at the end of DRAM:*/ - -set_mbar_register: - moveq.l #0x07, %d1 /* Setup MBAR */ - movec %d1, %dfc - - lea.l MCU_SIM_MBAR_ADRS, %a0 - move.l #_dprbase, %d0 - andi.l #MCU_SIM_MBAR_BA_MASK, %d0 - ori.l #MCU_SIM_MBAR_AS_MASK, %d0 - moves.l %d0, %a0@ - - moveq.l #0x05, %d1 - movec.l %d1, %dfc - - /* Now we can begin to access registers in DPRAM */ - -set_sim_mcr: - /* Set Module Configuration Register */ - move.l #MCU_SIM_MCR, MCR - - /* to do: Determine cause of reset */ - - /* - * configure system clock MC68360 p. 6-40 - * (value +1)*osc/128 = system clock - */ -set_sim_clock: - move.w #MCU_SIM_PLLCR, PLLCR - move.b #MCU_SIM_CLKOCR, CLKOCR - move.w #MCU_SIM_CDVCR, CDVCR - - /* Wait for the PLL to settle */ - move.w #16384, %d0 -pll_settle_wait: - subi.w #1, %d0 - bne pll_settle_wait - - /* Setup the system protection register, and watchdog timer register */ - move.b #MCU_SIM_SWIV, SWIV - move.w #MCU_SIM_PICR, PICR - move.w #MCU_SIM_PITR, PITR - move.w #MCU_SIM_SYPCR, SYPCR - - /* Clear DPRAM - system + parameter */ - movea.l #_dprbase, %a0 - movea.l #_dprbase+0x2000, %a1 - - /* Copy 0 to %a0 until %a0 == %a1 */ -clear_dpram: - movel #0, %a0@+ - cmpal %a0, %a1 - bhi clear_dpram - -configure_memory_controller: - /* Set up Global Memory Register (GMR) */ - move.l #MCU_SIM_GMR, %d0 - move.l %d0, GMR - -configure_chip_select_0: - move.l #RAMEND, %d0 - subi.l #__ramstart, %d0 - subq.l #0x01, %d0 - eori.l #SIM_OR_MASK, %d0 - ori.l #SIM_OR0_MASK, %d0 - move.l %d0, OR0 - - move.l #__ramstart, %d0 - ori.l #SIM_BR0_MASK, %d0 - move.l %d0, BR0 - -configure_chip_select_1: - move.l #ROMEND, %d0 - subi.l #__rom_start, %d0 - subq.l #0x01, %d0 - eori.l #SIM_OR_MASK, %d0 - ori.l #SIM_OR1_MASK, %d0 - move.l %d0, OR1 - - move.l #__rom_start, %d0 - ori.l #SIM_BR1_MASK, %d0 - move.l %d0, BR1 - - move.w #MCU_SIM_PEPAR, PEPAR - - /* point to vector table: */ - move.l #_romvec, %a0 - move.l #_ramvec, %a1 -copy_vectors: - move.l %a0@, %d0 - move.l %d0, %a1@ - move.l %a0@, %a1@ - addq.l #0x04, %a0 - addq.l #0x04, %a1 - cmp.l #_start, %a0 - blt copy_vectors - - move.l #_ramvec, %a1 - movec %a1, %vbr - - - /* Copy data segment from ROM to RAM */ - moveal #_stext, %a0 - moveal #_sdata, %a1 - moveal #_edata, %a2 - - /* Copy %a0 to %a1 until %a1 == %a2 */ -LD1: - move.l %a0@, %d0 - addq.l #0x04, %a0 - move.l %d0, %a1@ - addq.l #0x04, %a1 - cmp.l #_edata, %a1 - blt LD1 - - moveal #__bss_start, %a0 - moveal #__bss_stop, %a1 - - /* Copy 0 to %a0 until %a0 == %a1 */ -L1: - movel #0, %a0@+ - cmpal %a0, %a1 - bhi L1 - -load_quicc: - move.l #_dprbase, _quicc_base - -store_ram_size: - /* Set ram size information */ - move.l #_sdata, _rambase - move.l #__bss_stop, _ramstart - move.l #RAMEND, %d0 - sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ - move.l %d0, _ramend /* Different from RAMEND.*/ - - pea 0 - pea env - pea %sp@(4) - pea 0 - - lea init_thread_union, %a2 - lea 0x2000(%a2), %sp - -lp: - jsr start_kernel - -_exit: - jmp _exit - - - .data - .align 4 -env: - .long 0 -_quicc_base: - .long 0 -_periph_base: - .long 0 -_ramvec: - .long 0 -_rambase: - .long 0 -_ramstart: - .long 0 -_ramend: - .long 0 -_dprbase: - .long 0xffffe000 - - .text - - /* - * These are the exception vectors at boot up, they are copied into RAM - * and then overwritten as needed. - */ - -.section ".data..initvect","awx" - .long RAMEND /* Reset: Initial Stack Pointer - 0. */ - .long _start /* Reset: Initial Program Counter - 1. */ - .long buserr /* Bus Error - 2. */ - .long trap /* Address Error - 3. */ - .long trap /* Illegal Instruction - 4. */ - .long trap /* Divide by zero - 5. */ - .long trap /* CHK, CHK2 Instructions - 6. */ - .long trap /* TRAPcc, TRAPV Instructions - 7. */ - .long trap /* Privilege Violation - 8. */ - .long trap /* Trace - 9. */ - .long trap /* Line 1010 Emulator - 10. */ - .long trap /* Line 1111 Emualtor - 11. */ - .long trap /* Harware Breakpoint - 12. */ - .long trap /* (Reserved for Coprocessor Protocol Violation)- 13. */ - .long trap /* Format Error - 14. */ - .long trap /* Uninitialized Interrupt - 15. */ - .long trap /* (Unassigned, Reserver) - 16. */ - .long trap /* (Unassigned, Reserver) - 17. */ - .long trap /* (Unassigned, Reserver) - 18. */ - .long trap /* (Unassigned, Reserver) - 19. */ - .long trap /* (Unassigned, Reserver) - 20. */ - .long trap /* (Unassigned, Reserver) - 21. */ - .long trap /* (Unassigned, Reserver) - 22. */ - .long trap /* (Unassigned, Reserver) - 23. */ - .long trap /* Spurious Interrupt - 24. */ - .long trap /* Level 1 Interrupt Autovector - 25. */ - .long trap /* Level 2 Interrupt Autovector - 26. */ - .long trap /* Level 3 Interrupt Autovector - 27. */ - .long trap /* Level 4 Interrupt Autovector - 28. */ - .long trap /* Level 5 Interrupt Autovector - 29. */ - .long trap /* Level 6 Interrupt Autovector - 30. */ - .long trap /* Level 7 Interrupt Autovector - 31. */ - .long system_call /* Trap Instruction Vectors 0 - 32. */ - .long trap /* Trap Instruction Vectors 1 - 33. */ - .long trap /* Trap Instruction Vectors 2 - 34. */ - .long trap /* Trap Instruction Vectors 3 - 35. */ - .long trap /* Trap Instruction Vectors 4 - 36. */ - .long trap /* Trap Instruction Vectors 5 - 37. */ - .long trap /* Trap Instruction Vectors 6 - 38. */ - .long trap /* Trap Instruction Vectors 7 - 39. */ - .long trap /* Trap Instruction Vectors 8 - 40. */ - .long trap /* Trap Instruction Vectors 9 - 41. */ - .long trap /* Trap Instruction Vectors 10 - 42. */ - .long trap /* Trap Instruction Vectors 11 - 43. */ - .long trap /* Trap Instruction Vectors 12 - 44. */ - .long trap /* Trap Instruction Vectors 13 - 45. */ - .long trap /* Trap Instruction Vectors 14 - 46. */ - .long trap /* Trap Instruction Vectors 15 - 47. */ - .long 0 /* (Reserved for Coprocessor) - 48. */ - .long 0 /* (Reserved for Coprocessor) - 49. */ - .long 0 /* (Reserved for Coprocessor) - 50. */ - .long 0 /* (Reserved for Coprocessor) - 51. */ - .long 0 /* (Reserved for Coprocessor) - 52. */ - .long 0 /* (Reserved for Coprocessor) - 53. */ - .long 0 /* (Reserved for Coprocessor) - 54. */ - .long 0 /* (Reserved for Coprocessor) - 55. */ - .long 0 /* (Reserved for Coprocessor) - 56. */ - .long 0 /* (Reserved for Coprocessor) - 57. */ - .long 0 /* (Reserved for Coprocessor) - 58. */ - .long 0 /* (Unassigned, Reserved) - 59. */ - .long 0 /* (Unassigned, Reserved) - 60. */ - .long 0 /* (Unassigned, Reserved) - 61. */ - .long 0 /* (Unassigned, Reserved) - 62. */ - .long 0 /* (Unassigned, Reserved) - 63. */ - /* The assignment of these vectors to the CPM is */ - /* dependent on the configuration of the CPM vba */ - /* fields. */ - .long 0 /* (User-Defined Vectors 1) CPM Error - 64. */ - .long 0 /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */ - .long 0 /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */ - .long 0 /* (User-Defined Vectors 4) CPM SMC2 / PIP - 67. */ - .long 0 /* (User-Defined Vectors 5) CPM SMC1 - 68. */ - .long 0 /* (User-Defined Vectors 6) CPM SPI - 69. */ - .long 0 /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */ - .long 0 /* (User-Defined Vectors 8) CPM Timer 4 - 71. */ - .long 0 /* (User-Defined Vectors 9) CPM Reserved - 72. */ - .long 0 /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */ - .long 0 /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */ - .long 0 /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */ - .long 0 /* (User-Defined Vectors 13) CPM Timer 3 - 76. */ - .long 0 /* (User-Defined Vectors 14) CPM Reserved - 77. */ - .long 0 /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */ - .long 0 /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */ - .long 0 /* (User-Defined Vectors 17) CPM Reserved - 80. */ - .long 0 /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */ - .long 0 /* (User-Defined Vectors 19) CPM Timer 2 - 82. */ - .long 0 /* (User-Defined Vectors 21) CPM Reserved - 83. */ - .long 0 /* (User-Defined Vectors 22) CPM IDMA2 - 84. */ - .long 0 /* (User-Defined Vectors 23) CPM IDMA1 - 85. */ - .long 0 /* (User-Defined Vectors 24) CPM SDMA Bus Err - 86. */ - .long 0 /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */ - .long 0 /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */ - .long 0 /* (User-Defined Vectors 27) CPM Timer 1 - 89. */ - .long 0 /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */ - .long 0 /* (User-Defined Vectors 29) CPM SCC 4 - 91. */ - .long 0 /* (User-Defined Vectors 30) CPM SCC 3 - 92. */ - .long 0 /* (User-Defined Vectors 31) CPM SCC 2 - 93. */ - .long 0 /* (User-Defined Vectors 32) CPM SCC 1 - 94. */ - .long 0 /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */ - /* I don't think anything uses the vectors after here. */ - .long 0 /* (User-Defined Vectors 34) - 96. */ - .long 0,0,0,0,0 /* (User-Defined Vectors 35 - 39). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 40 - 49). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 50 - 59). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 60 - 69). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 70 - 79). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 80 - 89). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 90 - 99). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 100 - 109). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 110 - 119). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 120 - 129). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 130 - 139). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 140 - 149). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 150 - 159). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 160 - 169). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 170 - 179). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 180 - 189). */ - .long 0,0,0 /* (User-Defined Vectors 190 - 192). */ -.text -ignore: rte diff --git a/arch/m68k/68360/head-rom.S b/arch/m68k/68360/head-rom.S deleted file mode 100644 index b3a7e40f35e1..000000000000 --- a/arch/m68k/68360/head-rom.S +++ /dev/null @@ -1,413 +0,0 @@ -/* - * head-rom.S - startup code for Motorola 68360 - * - * Copyright (C) SED Systems, a Division of Calian Ltd. - * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S - * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7 - * uClinux Kernel - * Copyright (C) Michael Leslie - * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S - * Copyright (C) 1998 D. Jeff Dionne , - * - */ - -.global _stext -.global __bss_start -.global _start - -.global _rambase -.global _ramvec -.global _ramstart -.global _ramend - -.global _quicc_base -.global _periph_base - -#define RAMEND (CONFIG_RAMBASE + CONFIG_RAMSIZE) - -#define REGB 0x1000 -#define PEPAR (_dprbase + REGB + 0x0016) -#define GMR (_dprbase + REGB + 0x0040) -#define OR0 (_dprbase + REGB + 0x0054) -#define BR0 (_dprbase + REGB + 0x0050) - -#define OR1 (_dprbase + REGB + 0x0064) -#define BR1 (_dprbase + REGB + 0x0060) - -#define OR2 (_dprbase + REGB + 0x0074) -#define BR2 (_dprbase + REGB + 0x0070) - -#define OR3 (_dprbase + REGB + 0x0084) -#define BR3 (_dprbase + REGB + 0x0080) - -#define OR4 (_dprbase + REGB + 0x0094) -#define BR4 (_dprbase + REGB + 0x0090) - -#define OR5 (_dprbase + REGB + 0x00A4) -#define BR5 (_dprbase + REGB + 0x00A0) - -#define OR6 (_dprbase + REGB + 0x00b4) -#define BR6 (_dprbase + REGB + 0x00b0) - -#define OR7 (_dprbase + REGB + 0x00c4) -#define BR7 (_dprbase + REGB + 0x00c0) - -#define MCR (_dprbase + REGB + 0x0000) -#define AVR (_dprbase + REGB + 0x0008) - -#define SYPCR (_dprbase + REGB + 0x0022) - -#define PLLCR (_dprbase + REGB + 0x0010) -#define CLKOCR (_dprbase + REGB + 0x000C) -#define CDVCR (_dprbase + REGB + 0x0014) - -#define BKAR (_dprbase + REGB + 0x0030) -#define BKCR (_dprbase + REGB + 0x0034) -#define SWIV (_dprbase + REGB + 0x0023) -#define PICR (_dprbase + REGB + 0x0026) -#define PITR (_dprbase + REGB + 0x002A) - -/* Define for all memory configuration */ -#define MCU_SIM_GMR 0x00000000 -#define SIM_OR_MASK 0x0fffffff - -/* Defines for chip select zero - the flash */ -#define SIM_OR0_MASK 0x20000000 -#define SIM_BR0_MASK 0x00000001 - -/* Defines for chip select one - the RAM */ -#define SIM_OR1_MASK 0x10000000 -#define SIM_BR1_MASK 0x00000001 - -#define MCU_SIM_MBAR_ADRS 0x0003ff00 -#define MCU_SIM_MBAR_BA_MASK 0xfffff000 -#define MCU_SIM_MBAR_AS_MASK 0x00000001 - -#define MCU_SIM_PEPAR 0x00B4 - -#define MCU_DISABLE_INTRPTS 0x2700 -#define MCU_SIM_AVR 0x00 - -#define MCU_SIM_MCR 0x00005cff - -#define MCU_SIM_CLKOCR 0x00 -#define MCU_SIM_PLLCR 0x8000 -#define MCU_SIM_CDVCR 0x0000 - -#define MCU_SIM_SYPCR 0x0000 -#define MCU_SIM_SWIV 0x00 -#define MCU_SIM_PICR 0x0000 -#define MCU_SIM_PITR 0x0000 - - -#include - - -/* - * By the time this RAM specific code begins to execute, DPRAM - * and DRAM should already be mapped and accessible. - */ - - .text -_start: -_stext: - nop - ori.w #MCU_DISABLE_INTRPTS, %sr /* disable interrupts: */ - /* We should not need to setup the boot stack the reset should do it. */ - movea.l #RAMEND, %sp /* set up stack at the end of DRAM:*/ - - -set_mbar_register: - moveq.l #0x07, %d1 /* Setup MBAR */ - movec %d1, %dfc - - lea.l MCU_SIM_MBAR_ADRS, %a0 - move.l #_dprbase, %d0 - andi.l #MCU_SIM_MBAR_BA_MASK, %d0 - ori.l #MCU_SIM_MBAR_AS_MASK, %d0 - moves.l %d0, %a0@ - - moveq.l #0x05, %d1 - movec.l %d1, %dfc - - /* Now we can begin to access registers in DPRAM */ - -set_sim_mcr: - /* Set Module Configuration Register */ - move.l #MCU_SIM_MCR, MCR - - /* to do: Determine cause of reset */ - - /* - * configure system clock MC68360 p. 6-40 - * (value +1)*osc/128 = system clock - * or - * (value + 1)*osc = system clock - * You do not need to divide the oscillator by 128 unless you want to. - */ -set_sim_clock: - move.w #MCU_SIM_PLLCR, PLLCR - move.b #MCU_SIM_CLKOCR, CLKOCR - move.w #MCU_SIM_CDVCR, CDVCR - - /* Wait for the PLL to settle */ - move.w #16384, %d0 -pll_settle_wait: - subi.w #1, %d0 - bne pll_settle_wait - - /* Setup the system protection register, and watchdog timer register */ - move.b #MCU_SIM_SWIV, SWIV - move.w #MCU_SIM_PICR, PICR - move.w #MCU_SIM_PITR, PITR - move.w #MCU_SIM_SYPCR, SYPCR - - /* Clear DPRAM - system + parameter */ - movea.l #_dprbase, %a0 - movea.l #_dprbase+0x2000, %a1 - - /* Copy 0 to %a0 until %a0 == %a1 */ -clear_dpram: - movel #0, %a0@+ - cmpal %a0, %a1 - bhi clear_dpram - -configure_memory_controller: - /* Set up Global Memory Register (GMR) */ - move.l #MCU_SIM_GMR, %d0 - move.l %d0, GMR - -configure_chip_select_0: - move.l #0x00400000, %d0 - subq.l #0x01, %d0 - eori.l #SIM_OR_MASK, %d0 - ori.l #SIM_OR0_MASK, %d0 - move.l %d0, OR0 - - move.l #__rom_start, %d0 - ori.l #SIM_BR0_MASK, %d0 - move.l %d0, BR0 - - move.l #0x0, BR1 - move.l #0x0, BR2 - move.l #0x0, BR3 - move.l #0x0, BR4 - move.l #0x0, BR5 - move.l #0x0, BR6 - move.l #0x0, BR7 - - move.w #MCU_SIM_PEPAR, PEPAR - - /* point to vector table: */ - move.l #_romvec, %a0 - move.l #_ramvec, %a1 -copy_vectors: - move.l %a0@, %d0 - move.l %d0, %a1@ - move.l %a0@, %a1@ - addq.l #0x04, %a0 - addq.l #0x04, %a1 - cmp.l #_start, %a0 - blt copy_vectors - - move.l #_ramvec, %a1 - movec %a1, %vbr - - - /* Copy data segment from ROM to RAM */ - moveal #_etext, %a0 - moveal #_sdata, %a1 - moveal #_edata, %a2 - - /* Copy %a0 to %a1 until %a1 == %a2 */ -LD1: - move.l %a0@, %d0 - addq.l #0x04, %a0 - move.l %d0, %a1@ - addq.l #0x04, %a1 - cmp.l #_edata, %a1 - blt LD1 - - moveal #__bss_start, %a0 - moveal #__bss_stop, %a1 - - /* Copy 0 to %a0 until %a0 == %a1 */ -L1: - movel #0, %a0@+ - cmpal %a0, %a1 - bhi L1 - -load_quicc: - move.l #_dprbase, _quicc_base - -store_ram_size: - /* Set ram size information */ - move.l #_sdata, _rambase - move.l #__bss_stop, _ramstart - move.l #RAMEND, %d0 - sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ - move.l %d0, _ramend /* Different from RAMEND.*/ - - pea 0 - pea env - pea %sp@(4) - pea 0 - - lea init_thread_union, %a2 - lea 0x2000(%a2), %sp - -lp: - jsr start_kernel - -_exit: - jmp _exit - - - .data - .align 4 -env: - .long 0 -_quicc_base: - .long 0 -_periph_base: - .long 0 -_ramvec: - .long 0 -_rambase: - .long 0 -_ramstart: - .long 0 -_ramend: - .long 0 -_dprbase: - .long 0xffffe000 - - - .text - - /* - * These are the exception vectors at boot up, they are copied into RAM - * and then overwritten as needed. - */ - -.section ".data..initvect","awx" - .long RAMEND /* Reset: Initial Stack Pointer - 0. */ - .long _start /* Reset: Initial Program Counter - 1. */ - .long buserr /* Bus Error - 2. */ - .long trap /* Address Error - 3. */ - .long trap /* Illegal Instruction - 4. */ - .long trap /* Divide by zero - 5. */ - .long trap /* CHK, CHK2 Instructions - 6. */ - .long trap /* TRAPcc, TRAPV Instructions - 7. */ - .long trap /* Privilege Violation - 8. */ - .long trap /* Trace - 9. */ - .long trap /* Line 1010 Emulator - 10. */ - .long trap /* Line 1111 Emualtor - 11. */ - .long trap /* Harware Breakpoint - 12. */ - .long trap /* (Reserved for Coprocessor Protocol Violation)- 13. */ - .long trap /* Format Error - 14. */ - .long trap /* Uninitialized Interrupt - 15. */ - .long trap /* (Unassigned, Reserver) - 16. */ - .long trap /* (Unassigned, Reserver) - 17. */ - .long trap /* (Unassigned, Reserver) - 18. */ - .long trap /* (Unassigned, Reserver) - 19. */ - .long trap /* (Unassigned, Reserver) - 20. */ - .long trap /* (Unassigned, Reserver) - 21. */ - .long trap /* (Unassigned, Reserver) - 22. */ - .long trap /* (Unassigned, Reserver) - 23. */ - .long trap /* Spurious Interrupt - 24. */ - .long trap /* Level 1 Interrupt Autovector - 25. */ - .long trap /* Level 2 Interrupt Autovector - 26. */ - .long trap /* Level 3 Interrupt Autovector - 27. */ - .long trap /* Level 4 Interrupt Autovector - 28. */ - .long trap /* Level 5 Interrupt Autovector - 29. */ - .long trap /* Level 6 Interrupt Autovector - 30. */ - .long trap /* Level 7 Interrupt Autovector - 31. */ - .long system_call /* Trap Instruction Vectors 0 - 32. */ - .long trap /* Trap Instruction Vectors 1 - 33. */ - .long trap /* Trap Instruction Vectors 2 - 34. */ - .long trap /* Trap Instruction Vectors 3 - 35. */ - .long trap /* Trap Instruction Vectors 4 - 36. */ - .long trap /* Trap Instruction Vectors 5 - 37. */ - .long trap /* Trap Instruction Vectors 6 - 38. */ - .long trap /* Trap Instruction Vectors 7 - 39. */ - .long trap /* Trap Instruction Vectors 8 - 40. */ - .long trap /* Trap Instruction Vectors 9 - 41. */ - .long trap /* Trap Instruction Vectors 10 - 42. */ - .long trap /* Trap Instruction Vectors 11 - 43. */ - .long trap /* Trap Instruction Vectors 12 - 44. */ - .long trap /* Trap Instruction Vectors 13 - 45. */ - .long trap /* Trap Instruction Vectors 14 - 46. */ - .long trap /* Trap Instruction Vectors 15 - 47. */ - .long 0 /* (Reserved for Coprocessor) - 48. */ - .long 0 /* (Reserved for Coprocessor) - 49. */ - .long 0 /* (Reserved for Coprocessor) - 50. */ - .long 0 /* (Reserved for Coprocessor) - 51. */ - .long 0 /* (Reserved for Coprocessor) - 52. */ - .long 0 /* (Reserved for Coprocessor) - 53. */ - .long 0 /* (Reserved for Coprocessor) - 54. */ - .long 0 /* (Reserved for Coprocessor) - 55. */ - .long 0 /* (Reserved for Coprocessor) - 56. */ - .long 0 /* (Reserved for Coprocessor) - 57. */ - .long 0 /* (Reserved for Coprocessor) - 58. */ - .long 0 /* (Unassigned, Reserved) - 59. */ - .long 0 /* (Unassigned, Reserved) - 60. */ - .long 0 /* (Unassigned, Reserved) - 61. */ - .long 0 /* (Unassigned, Reserved) - 62. */ - .long 0 /* (Unassigned, Reserved) - 63. */ - /* The assignment of these vectors to the CPM is */ - /* dependent on the configuration of the CPM vba */ - /* fields. */ - .long 0 /* (User-Defined Vectors 1) CPM Error - 64. */ - .long 0 /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */ - .long 0 /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */ - .long 0 /* (User-Defined Vectors 4) CPM SMC2 / PIP - 67. */ - .long 0 /* (User-Defined Vectors 5) CPM SMC1 - 68. */ - .long 0 /* (User-Defined Vectors 6) CPM SPI - 69. */ - .long 0 /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */ - .long 0 /* (User-Defined Vectors 8) CPM Timer 4 - 71. */ - .long 0 /* (User-Defined Vectors 9) CPM Reserved - 72. */ - .long 0 /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */ - .long 0 /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */ - .long 0 /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */ - .long 0 /* (User-Defined Vectors 13) CPM Timer 3 - 76. */ - .long 0 /* (User-Defined Vectors 14) CPM Reserved - 77. */ - .long 0 /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */ - .long 0 /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */ - .long 0 /* (User-Defined Vectors 17) CPM Reserved - 80. */ - .long 0 /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */ - .long 0 /* (User-Defined Vectors 19) CPM Timer 2 - 82. */ - .long 0 /* (User-Defined Vectors 21) CPM Reserved - 83. */ - .long 0 /* (User-Defined Vectors 22) CPM IDMA2 - 84. */ - .long 0 /* (User-Defined Vectors 23) CPM IDMA1 - 85. */ - .long 0 /* (User-Defined Vectors 24) CPM SDMA Bus Err - 86. */ - .long 0 /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */ - .long 0 /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */ - .long 0 /* (User-Defined Vectors 27) CPM Timer 1 - 89. */ - .long 0 /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */ - .long 0 /* (User-Defined Vectors 29) CPM SCC 4 - 91. */ - .long 0 /* (User-Defined Vectors 30) CPM SCC 3 - 92. */ - .long 0 /* (User-Defined Vectors 31) CPM SCC 2 - 93. */ - .long 0 /* (User-Defined Vectors 32) CPM SCC 1 - 94. */ - .long 0 /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */ - /* I don't think anything uses the vectors after here. */ - .long 0 /* (User-Defined Vectors 34) - 96. */ - .long 0,0,0,0,0 /* (User-Defined Vectors 35 - 39). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 40 - 49). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 50 - 59). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 60 - 69). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 70 - 79). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 80 - 89). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 90 - 99). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 100 - 109). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 110 - 119). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 120 - 129). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 130 - 139). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 140 - 149). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 150 - 159). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 160 - 169). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 170 - 179). */ - .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 180 - 189). */ - .long 0,0,0 /* (User-Defined Vectors 190 - 192). */ -.text -ignore: rte diff --git a/arch/m68k/68360/ints.c b/arch/m68k/68360/ints.c deleted file mode 100644 index 2360fc046681..000000000000 --- a/arch/m68k/68360/ints.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * ints.c - first level interrupt handlers - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - * - * Copyright (c) 2000 Michael Leslie - * Copyright (c) 1996 Roman Zippel - * Copyright (c) 1999 D. Jeff Dionne - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* from quicc/commproc.c: */ -extern QUICC *pquicc; -extern void cpm_interrupt_init(void); - -#define INTERNAL_IRQS (96) - -/* assembler routines */ -asmlinkage void system_call(void); -asmlinkage void buserr(void); -asmlinkage void trap(void); -asmlinkage void bad_interrupt(void); -asmlinkage void inthandler(void); - -static void intc_irq_unmask(struct irq_data *d) -{ - pquicc->intr_cimr |= (1 << d->irq); -} - -static void intc_irq_mask(struct irq_data *d) -{ - pquicc->intr_cimr &= ~(1 << d->irq); -} - -static void intc_irq_ack(struct irq_data *d) -{ - pquicc->intr_cisr = (1 << d->irq); -} - -static struct irq_chip intc_irq_chip = { - .name = "M68K-INTC", - .irq_mask = intc_irq_mask, - .irq_unmask = intc_irq_unmask, - .irq_ack = intc_irq_ack, -}; - -/* - * This function should be called during kernel startup to initialize - * the vector table. - */ -void __init trap_init(void) -{ - int vba = (CPM_VECTOR_BASE<<4); - - /* set up the vectors */ - _ramvec[2] = buserr; - _ramvec[3] = trap; - _ramvec[4] = trap; - _ramvec[5] = trap; - _ramvec[6] = trap; - _ramvec[7] = trap; - _ramvec[8] = trap; - _ramvec[9] = trap; - _ramvec[10] = trap; - _ramvec[11] = trap; - _ramvec[12] = trap; - _ramvec[13] = trap; - _ramvec[14] = trap; - _ramvec[15] = trap; - - _ramvec[32] = system_call; - _ramvec[33] = trap; - - cpm_interrupt_init(); - - /* set up CICR for vector base address and irq level */ - /* irl = 4, hp = 1f - see MC68360UM p 7-377 */ - pquicc->intr_cicr = 0x00e49f00 | vba; - - /* CPM interrupt vectors: (p 7-376) */ - _ramvec[vba+CPMVEC_ERROR] = bad_interrupt; /* Error */ - _ramvec[vba+CPMVEC_PIO_PC11] = inthandler; /* pio - pc11 */ - _ramvec[vba+CPMVEC_PIO_PC10] = inthandler; /* pio - pc10 */ - _ramvec[vba+CPMVEC_SMC2] = inthandler; /* smc2/pip */ - _ramvec[vba+CPMVEC_SMC1] = inthandler; /* smc1 */ - _ramvec[vba+CPMVEC_SPI] = inthandler; /* spi */ - _ramvec[vba+CPMVEC_PIO_PC9] = inthandler; /* pio - pc9 */ - _ramvec[vba+CPMVEC_TIMER4] = inthandler; /* timer 4 */ - _ramvec[vba+CPMVEC_RESERVED1] = inthandler; /* reserved */ - _ramvec[vba+CPMVEC_PIO_PC8] = inthandler; /* pio - pc8 */ - _ramvec[vba+CPMVEC_PIO_PC7] = inthandler; /* pio - pc7 */ - _ramvec[vba+CPMVEC_PIO_PC6] = inthandler; /* pio - pc6 */ - _ramvec[vba+CPMVEC_TIMER3] = inthandler; /* timer 3 */ - _ramvec[vba+CPMVEC_PIO_PC5] = inthandler; /* pio - pc5 */ - _ramvec[vba+CPMVEC_PIO_PC4] = inthandler; /* pio - pc4 */ - _ramvec[vba+CPMVEC_RESERVED2] = inthandler; /* reserved */ - _ramvec[vba+CPMVEC_RISCTIMER] = inthandler; /* timer table */ - _ramvec[vba+CPMVEC_TIMER2] = inthandler; /* timer 2 */ - _ramvec[vba+CPMVEC_RESERVED3] = inthandler; /* reserved */ - _ramvec[vba+CPMVEC_IDMA2] = inthandler; /* idma 2 */ - _ramvec[vba+CPMVEC_IDMA1] = inthandler; /* idma 1 */ - _ramvec[vba+CPMVEC_SDMA_CB_ERR] = inthandler; /* sdma channel bus error */ - _ramvec[vba+CPMVEC_PIO_PC3] = inthandler; /* pio - pc3 */ - _ramvec[vba+CPMVEC_PIO_PC2] = inthandler; /* pio - pc2 */ - /* _ramvec[vba+CPMVEC_TIMER1] = cpm_isr_timer1; */ /* timer 1 */ - _ramvec[vba+CPMVEC_TIMER1] = inthandler; /* timer 1 */ - _ramvec[vba+CPMVEC_PIO_PC1] = inthandler; /* pio - pc1 */ - _ramvec[vba+CPMVEC_SCC4] = inthandler; /* scc 4 */ - _ramvec[vba+CPMVEC_SCC3] = inthandler; /* scc 3 */ - _ramvec[vba+CPMVEC_SCC2] = inthandler; /* scc 2 */ - _ramvec[vba+CPMVEC_SCC1] = inthandler; /* scc 1 */ - _ramvec[vba+CPMVEC_PIO_PC0] = inthandler; /* pio - pc0 */ - - - /* turn off all CPM interrupts */ - pquicc->intr_cimr = 0x00000000; -} - -void init_IRQ(void) -{ - int i; - - for (i = 0; (i < NR_IRQS); i++) { - irq_set_chip(i, &intc_irq_chip); - irq_set_handler(i, handle_level_irq); - } -} - diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index c496d48a8c8d..0dfcf1281e9c 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -114,13 +114,6 @@ config M68VZ328 help Motorola 68VZ328 processor support. -config M68360 - bool "MC68360" - depends on !MMU - select MCPU32 - help - Motorola 68360 processor support. - endif # M68KCLASSIC if COLDFIRE diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug index 64776d7ac199..50a67d08aec4 100644 --- a/arch/m68k/Kconfig.debug +++ b/arch/m68k/Kconfig.debug @@ -12,7 +12,7 @@ config BOOTPARAM_STRING config EARLY_PRINTK bool "Early printk" - depends on !(SUN3 || M68360 || M68000 || COLDFIRE) + depends on !(SUN3 || M68000 || COLDFIRE) help Write kernel log output directly to a serial port. Where implemented, output goes to the framebuffer as well. diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine index 61dc643c0b05..2a5c7abb2896 100644 --- a/arch/m68k/Kconfig.machine +++ b/arch/m68k/Kconfig.machine @@ -187,12 +187,6 @@ config MEMORY_RESERVE help Reserve certain memory regions on 68x328 based boards. -config UCQUICC - bool "Lineo uCquicc board support" - depends on M68360 - help - Support for the Lineo uCquicc board. - config ARN5206 bool "Arnewsh 5206 board support" depends on M5206 diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile index 0b29dcfef69f..f0dd9fc84002 100644 --- a/arch/m68k/Makefile +++ b/arch/m68k/Makefile @@ -39,7 +39,6 @@ cpuflags-$(CONFIG_M68040) := -m68040 endif cpuflags-$(CONFIG_M68030) := cpuflags-$(CONFIG_M68020) := -cpuflags-$(CONFIG_M68360) := -m68332 cpuflags-$(CONFIG_M68000) := -m68000 cpuflags-$(CONFIG_M5441x) := $(call cc-option,-mcpu=54455,-mcfv4e) cpuflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200) @@ -92,7 +91,6 @@ endif # head-y := arch/m68k/kernel/head.o head-$(CONFIG_SUN3) := arch/m68k/kernel/sun3-head.o -head-$(CONFIG_M68360) := arch/m68k/68360/head.o head-$(CONFIG_M68000) := arch/m68k/68000/head.o head-$(CONFIG_COLDFIRE) := arch/m68k/coldfire/head.o @@ -114,7 +112,6 @@ core-$(CONFIG_NATFEAT) += arch/m68k/emu/ core-$(CONFIG_M68040) += arch/m68k/fpsp040/ core-$(CONFIG_M68060) += arch/m68k/ifpsp060/ core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/ -core-$(CONFIG_M68360) += arch/m68k/68360/ core-$(CONFIG_M68000) += arch/m68k/68000/ core-$(CONFIG_COLDFIRE) += arch/m68k/coldfire/ diff --git a/arch/m68k/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h deleted file mode 100644 index f41c96863e98..000000000000 --- a/arch/m68k/include/asm/commproc.h +++ /dev/null @@ -1,664 +0,0 @@ - -/* - * 68360 Communication Processor Module. - * Copyright (c) 2000 Michael Leslie (mc68360) after: - * Copyright (c) 1997 Dan Malek (mpc8xx) - * - * This file contains structures and information for the communication - * processor channels. Some CPM control and status is available - * through the 68360 internal memory map. See include/asm/360_immap.h for details. - * This file is not a complete map of all of the 360 QUICC's capabilities - * - * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 - * bytes of the DP RAM and relocates the I2C parameter area to the - * IDMA1 space. The remaining DP RAM is available for buffer descriptors - * or other use. - */ -#ifndef __CPM_360__ -#define __CPM_360__ - - -/* CPM Command register masks: */ -#define CPM_CR_RST ((ushort)0x8000) -#define CPM_CR_OPCODE ((ushort)0x0f00) -#define CPM_CR_CHAN ((ushort)0x00f0) -#define CPM_CR_FLG ((ushort)0x0001) - -/* CPM Command set (opcodes): */ -#define CPM_CR_INIT_TRX ((ushort)0x0000) -#define CPM_CR_INIT_RX ((ushort)0x0001) -#define CPM_CR_INIT_TX ((ushort)0x0002) -#define CPM_CR_HUNT_MODE ((ushort)0x0003) -#define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_GRSTOP_TX ((ushort)0x0005) -#define CPM_CR_RESTART_TX ((ushort)0x0006) -#define CPM_CR_CLOSE_RXBD ((ushort)0x0007) -#define CPM_CR_SET_GADDR ((ushort)0x0008) -#define CPM_CR_GCI_TIMEOUT ((ushort)0x0009) -#define CPM_CR_GCI_ABORT ((ushort)0x000a) -#define CPM_CR_RESET_BCS ((ushort)0x000a) - -/* CPM Channel numbers. */ -#define CPM_CR_CH_SCC1 ((ushort)0x0000) -#define CPM_CR_CH_SCC2 ((ushort)0x0004) -#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */ -#define CPM_CR_CH_TMR ((ushort)0x0005) -#define CPM_CR_CH_SCC3 ((ushort)0x0008) -#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */ -#define CPM_CR_CH_IDMA1 ((ushort)0x0009) -#define CPM_CR_CH_SCC4 ((ushort)0x000c) -#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */ -#define CPM_CR_CH_IDMA2 ((ushort)0x000d) - - -#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) - -#if 1 /* mleslie: I dinna think we have any such restrictions on - * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */ - -/* The dual ported RAM is multi-functional. Some areas can be (and are - * being) used for microcode. There is an area that can only be used - * as data ram for buffer descriptors, which is all we use right now. - * Currently the first 512 and last 256 bytes are used for microcode. - */ -/* mleslie: The uCquicc board is using no extra microcode in DPRAM */ -#define CPM_DATAONLY_BASE ((uint)0x0000) -#define CPM_DATAONLY_SIZE ((uint)0x0800) -#define CPM_DP_NOSPACE ((uint)0x7fffffff) - -#endif - - -/* Export the base address of the communication processor registers - * and dual port ram. */ -/* extern cpm360_t *cpmp; */ /* Pointer to comm processor */ -extern QUICC *pquicc; -uint m360_cpm_dpalloc(uint size); -/* void *m360_cpm_hostalloc(uint size); */ -void m360_cpm_setbrg(uint brg, uint rate); - -#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */ -/* Buffer descriptors used by many of the CPM protocols. */ -typedef struct cpm_buf_desc { - ushort cbd_sc; /* Status and Control */ - ushort cbd_datlen; /* Data length in buffer */ - uint cbd_bufaddr; /* Buffer address in host memory */ -} cbd_t; -#endif - - -/* rx bd status/control bits */ -#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ -#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */ -#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ -#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */ - -#define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */ -#define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */ - -#define BD_SC_CM ((ushort)0x0200) /* Continuous mode */ -#define BD_SC_ID ((ushort)0x0100) /* Received too many idles */ - -#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */ -#define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */ - -#define BD_SC_BR ((ushort)0x0020) /* Break received */ -#define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */ - -#define BD_SC_FR ((ushort)0x0010) /* Framing error */ -#define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */ - -#define BD_SC_PR ((ushort)0x0008) /* Parity error */ -#define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */ - -#define BD_SC_OV ((ushort)0x0002) /* Overrun */ -#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */ - -/* tx bd status/control bits (as differ from rx bd) */ -#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ -#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */ -#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ -#define BD_SC_UN ((ushort)0x0002) /* Underrun */ - - - - -/* Parameter RAM offsets. */ - - - -/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM. - * In 2.0, we use a more structured C struct map of DPRAM, and so - * instead, we need only a parameter ram `slot' */ - -#define PRSLOT_SCC1 0 -#define PRSLOT_SCC2 1 -#define PRSLOT_SCC3 2 -#define PRSLOT_SMC1 2 -#define PRSLOT_SCC4 3 -#define PRSLOT_SMC2 3 - - -/* #define PROFF_SCC1 ((uint)0x0000) */ -/* #define PROFF_SCC2 ((uint)0x0100) */ -/* #define PROFF_SCC3 ((uint)0x0200) */ -/* #define PROFF_SMC1 ((uint)0x0280) */ -/* #define PROFF_SCC4 ((uint)0x0300) */ -/* #define PROFF_SMC2 ((uint)0x0380) */ - - -/* Define enough so I can at least use the serial port as a UART. - * The MBX uses SMC1 as the host serial port. - */ -typedef struct smc_uart { - ushort smc_rbase; /* Rx Buffer descriptor base address */ - ushort smc_tbase; /* Tx Buffer descriptor base address */ - u_char smc_rfcr; /* Rx function code */ - u_char smc_tfcr; /* Tx function code */ - ushort smc_mrblr; /* Max receive buffer length */ - uint smc_rstate; /* Internal */ - uint smc_idp; /* Internal */ - ushort smc_rbptr; /* Internal */ - ushort smc_ibc; /* Internal */ - uint smc_rxtmp; /* Internal */ - uint smc_tstate; /* Internal */ - uint smc_tdp; /* Internal */ - ushort smc_tbptr; /* Internal */ - ushort smc_tbc; /* Internal */ - uint smc_txtmp; /* Internal */ - ushort smc_maxidl; /* Maximum idle characters */ - ushort smc_tmpidl; /* Temporary idle counter */ - ushort smc_brklen; /* Last received break length */ - ushort smc_brkec; /* rcv'd break condition counter */ - ushort smc_brkcr; /* xmt break count register */ - ushort smc_rmask; /* Temporary bit mask */ -} smc_uart_t; - -/* Function code bits. -*/ -#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ - -/* SMC uart mode register. -*/ -#define SMCMR_REN ((ushort)0x0001) -#define SMCMR_TEN ((ushort)0x0002) -#define SMCMR_DM ((ushort)0x000c) -#define SMCMR_SM_GCI ((ushort)0x0000) -#define SMCMR_SM_UART ((ushort)0x0020) -#define SMCMR_SM_TRANS ((ushort)0x0030) -#define SMCMR_SM_MASK ((ushort)0x0030) -#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ -#define SMCMR_REVD SMCMR_PM_EVEN -#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ -#define SMCMR_BS SMCMR_PEN -#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ -#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ -#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) - -/* SMC2 as Centronics parallel printer. It is half duplex, in that - * it can only receive or transmit. The parameter ram values for - * each direction are either unique or properly overlap, so we can - * include them in one structure. - */ -typedef struct smc_centronics { - ushort scent_rbase; - ushort scent_tbase; - u_char scent_cfcr; - u_char scent_smask; - ushort scent_mrblr; - uint scent_rstate; - uint scent_r_ptr; - ushort scent_rbptr; - ushort scent_r_cnt; - uint scent_rtemp; - uint scent_tstate; - uint scent_t_ptr; - ushort scent_tbptr; - ushort scent_t_cnt; - uint scent_ttemp; - ushort scent_max_sl; - ushort scent_sl_cnt; - ushort scent_character1; - ushort scent_character2; - ushort scent_character3; - ushort scent_character4; - ushort scent_character5; - ushort scent_character6; - ushort scent_character7; - ushort scent_character8; - ushort scent_rccm; - ushort scent_rccr; -} smc_cent_t; - -/* Centronics Status Mask Register. -*/ -#define SMC_CENT_F ((u_char)0x08) -#define SMC_CENT_PE ((u_char)0x04) -#define SMC_CENT_S ((u_char)0x02) - -/* SMC Event and Mask register. -*/ -#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ -#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ -#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ -#define SMCM_BSY ((unsigned char)0x04) -#define SMCM_TX ((unsigned char)0x02) -#define SMCM_RX ((unsigned char)0x01) - -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - -/* SCCs. -*/ -#define SCC_GSMRH_IRP ((uint)0x00040000) -#define SCC_GSMRH_GDE ((uint)0x00010000) -#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) -#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) -#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) -#define SCC_GSMRH_REVD ((uint)0x00002000) -#define SCC_GSMRH_TRX ((uint)0x00001000) -#define SCC_GSMRH_TTX ((uint)0x00000800) -#define SCC_GSMRH_CDP ((uint)0x00000400) -#define SCC_GSMRH_CTSP ((uint)0x00000200) -#define SCC_GSMRH_CDS ((uint)0x00000100) -#define SCC_GSMRH_CTSS ((uint)0x00000080) -#define SCC_GSMRH_TFL ((uint)0x00000040) -#define SCC_GSMRH_RFW ((uint)0x00000020) -#define SCC_GSMRH_TXSY ((uint)0x00000010) -#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) -#define SCC_GSMRH_SYNL8 ((uint)0x00000008) -#define SCC_GSMRH_SYNL4 ((uint)0x00000004) -#define SCC_GSMRH_RTSM ((uint)0x00000002) -#define SCC_GSMRH_RSYN ((uint)0x00000001) - -#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ -#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) -#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) -#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) -#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) -#define SCC_GSMRL_TCI ((uint)0x10000000) -#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) -#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) -#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) -#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) -#define SCC_GSMRL_RINV ((uint)0x02000000) -#define SCC_GSMRL_TINV ((uint)0x01000000) -#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) -#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) -#define SCC_GSMRL_TPL_48 ((uint)0x00800000) -#define SCC_GSMRL_TPL_32 ((uint)0x00600000) -#define SCC_GSMRL_TPL_16 ((uint)0x00400000) -#define SCC_GSMRL_TPL_8 ((uint)0x00200000) -#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) -#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) -#define SCC_GSMRL_TPP_01 ((uint)0x00100000) -#define SCC_GSMRL_TPP_10 ((uint)0x00080000) -#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) -#define SCC_GSMRL_TEND ((uint)0x00040000) -#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) -#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) -#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) -#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) -#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) -#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) -#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) -#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) -#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) -#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) -#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) -#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) -#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) -#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) -#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ -#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) -#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) -#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) -#define SCC_GSMRL_ENR ((uint)0x00000020) -#define SCC_GSMRL_ENT ((uint)0x00000010) -#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) -#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) -#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) -#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) -#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) -#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) -#define SCC_GSMRL_MODE_UART ((uint)0x00000004) -#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) -#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) -#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) - -#define SCC_TODR_TOD ((ushort)0x8000) - -/* SCC Event and Mask register. -*/ -#define SCCM_TXE ((unsigned char)0x10) -#define SCCM_BSY ((unsigned char)0x04) -#define SCCM_TX ((unsigned char)0x02) -#define SCCM_RX ((unsigned char)0x01) - -typedef struct scc_param { - ushort scc_rbase; /* Rx Buffer descriptor base address */ - ushort scc_tbase; /* Tx Buffer descriptor base address */ - u_char scc_rfcr; /* Rx function code */ - u_char scc_tfcr; /* Tx function code */ - ushort scc_mrblr; /* Max receive buffer length */ - uint scc_rstate; /* Internal */ - uint scc_idp; /* Internal */ - ushort scc_rbptr; /* Internal */ - ushort scc_ibc; /* Internal */ - uint scc_rxtmp; /* Internal */ - uint scc_tstate; /* Internal */ - uint scc_tdp; /* Internal */ - ushort scc_tbptr; /* Internal */ - ushort scc_tbc; /* Internal */ - uint scc_txtmp; /* Internal */ - uint scc_rcrc; /* Internal */ - uint scc_tcrc; /* Internal */ -} sccp_t; - - -/* Function code bits. - */ -#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ -#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */ - -/* CPM Ethernet through SCC1. - */ -typedef struct scc_enet { - sccp_t sen_genscc; - uint sen_cpres; /* Preset CRC */ - uint sen_cmask; /* Constant mask for CRC */ - uint sen_crcec; /* CRC Error counter */ - uint sen_alec; /* alignment error counter */ - uint sen_disfc; /* discard frame counter */ - ushort sen_pads; /* Tx short frame pad character */ - ushort sen_retlim; /* Retry limit threshold */ - ushort sen_retcnt; /* Retry limit counter */ - ushort sen_maxflr; /* maximum frame length register */ - ushort sen_minflr; /* minimum frame length register */ - ushort sen_maxd1; /* maximum DMA1 length */ - ushort sen_maxd2; /* maximum DMA2 length */ - ushort sen_maxd; /* Rx max DMA */ - ushort sen_dmacnt; /* Rx DMA counter */ - ushort sen_maxb; /* Max BD byte count */ - ushort sen_gaddr1; /* Group address filter */ - ushort sen_gaddr2; - ushort sen_gaddr3; - ushort sen_gaddr4; - uint sen_tbuf0data0; /* Save area 0 - current frame */ - uint sen_tbuf0data1; /* Save area 1 - current frame */ - uint sen_tbuf0rba; /* Internal */ - uint sen_tbuf0crc; /* Internal */ - ushort sen_tbuf0bcnt; /* Internal */ - ushort sen_paddrh; /* physical address (MSB) */ - ushort sen_paddrm; - ushort sen_paddrl; /* physical address (LSB) */ - ushort sen_pper; /* persistence */ - ushort sen_rfbdptr; /* Rx first BD pointer */ - ushort sen_tfbdptr; /* Tx first BD pointer */ - ushort sen_tlbdptr; /* Tx last BD pointer */ - uint sen_tbuf1data0; /* Save area 0 - current frame */ - uint sen_tbuf1data1; /* Save area 1 - current frame */ - uint sen_tbuf1rba; /* Internal */ - uint sen_tbuf1crc; /* Internal */ - ushort sen_tbuf1bcnt; /* Internal */ - ushort sen_txlen; /* Tx Frame length counter */ - ushort sen_iaddr1; /* Individual address filter */ - ushort sen_iaddr2; - ushort sen_iaddr3; - ushort sen_iaddr4; - ushort sen_boffcnt; /* Backoff counter */ - - /* NOTE: Some versions of the manual have the following items - * incorrectly documented. Below is the proper order. - */ - ushort sen_taddrh; /* temp address (MSB) */ - ushort sen_taddrm; - ushort sen_taddrl; /* temp address (LSB) */ -} scc_enet_t; - - - -#if defined (CONFIG_UCQUICC) -/* uCquicc has the following signals connected to Ethernet: - * 68360 - lxt905 - * PA0/RXD1 - rxd - * PA1/TXD1 - txd - * PA8/CLK1 - tclk - * PA9/CLK2 - rclk - * PC0/!RTS1 - t_en - * PC1/!CTS1 - col - * PC5/!CD1 - cd - */ -#define PA_ENET_RXD PA_RXD1 -#define PA_ENET_TXD PA_TXD1 -#define PA_ENET_TCLK PA_CLK1 -#define PA_ENET_RCLK PA_CLK2 -#define PC_ENET_TENA PC_RTS1 -#define PC_ENET_CLSN PC_CTS1 -#define PC_ENET_RENA PC_CD1 - -/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to - * SCC1. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000002c) - -#endif /* config_ucquicc */ - - -#ifdef MBX -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC1 use. The TCLK and RCLK seem unique - * to the MBX860 board. Any two of the four available clocks could be - * used, and the MPC860 cookbook manual has an example using different - * clock pins. - */ -#define PA_ENET_RXD ((ushort)0x0001) -#define PA_ENET_TXD ((ushort)0x0002) -#define PA_ENET_TCLK ((ushort)0x0200) -#define PA_ENET_RCLK ((ushort)0x0800) -#define PC_ENET_TENA ((ushort)0x0001) -#define PC_ENET_CLSN ((ushort)0x0010) -#define PC_ENET_RENA ((ushort)0x0020) - -/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to - * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000003d) -#endif - -/* SCC Event register as used by Ethernet. -*/ -#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ -#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* SCC Mode Register (PMSR) as used by Ethernet. -*/ -#define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */ -#define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */ -#define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */ -#define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */ -#define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ -#define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */ -#define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ -#define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */ -#define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */ -#define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */ -#define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */ -#define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */ -#define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */ - -/* Buffer descriptor control/status used by Ethernet receive. -*/ -#define BD_ENET_RX_EMPTY ((ushort)0x8000) -#define BD_ENET_RX_WRAP ((ushort)0x2000) -#define BD_ENET_RX_INTR ((ushort)0x1000) -#define BD_ENET_RX_LAST ((ushort)0x0800) -#define BD_ENET_RX_FIRST ((ushort)0x0400) -#define BD_ENET_RX_MISS ((ushort)0x0100) -#define BD_ENET_RX_LG ((ushort)0x0020) -#define BD_ENET_RX_NO ((ushort)0x0010) -#define BD_ENET_RX_SH ((ushort)0x0008) -#define BD_ENET_RX_CR ((ushort)0x0004) -#define BD_ENET_RX_OV ((ushort)0x0002) -#define BD_ENET_RX_CL ((ushort)0x0001) -#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ - -/* Buffer descriptor control/status used by Ethernet transmit. -*/ -#define BD_ENET_TX_READY ((ushort)0x8000) -#define BD_ENET_TX_PAD ((ushort)0x4000) -#define BD_ENET_TX_WRAP ((ushort)0x2000) -#define BD_ENET_TX_INTR ((ushort)0x1000) -#define BD_ENET_TX_LAST ((ushort)0x0800) -#define BD_ENET_TX_TC ((ushort)0x0400) -#define BD_ENET_TX_DEF ((ushort)0x0200) -#define BD_ENET_TX_HB ((ushort)0x0100) -#define BD_ENET_TX_LC ((ushort)0x0080) -#define BD_ENET_TX_RL ((ushort)0x0040) -#define BD_ENET_TX_RCMASK ((ushort)0x003c) -#define BD_ENET_TX_UN ((ushort)0x0002) -#define BD_ENET_TX_CSL ((ushort)0x0001) -#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ - -/* SCC as UART -*/ -typedef struct scc_uart { - sccp_t scc_genscc; - uint scc_res1; /* Reserved */ - uint scc_res2; /* Reserved */ - ushort scc_maxidl; /* Maximum idle chars */ - ushort scc_idlc; /* temp idle counter */ - ushort scc_brkcr; /* Break count register */ - ushort scc_parec; /* receive parity error counter */ - ushort scc_frmec; /* receive framing error counter */ - ushort scc_nosec; /* receive noise counter */ - ushort scc_brkec; /* receive break condition counter */ - ushort scc_brkln; /* last received break length */ - ushort scc_uaddr1; /* UART address character 1 */ - ushort scc_uaddr2; /* UART address character 2 */ - ushort scc_rtemp; /* Temp storage */ - ushort scc_toseq; /* Transmit out of sequence char */ - ushort scc_char1; /* control character 1 */ - ushort scc_char2; /* control character 2 */ - ushort scc_char3; /* control character 3 */ - ushort scc_char4; /* control character 4 */ - ushort scc_char5; /* control character 5 */ - ushort scc_char6; /* control character 6 */ - ushort scc_char7; /* control character 7 */ - ushort scc_char8; /* control character 8 */ - ushort scc_rccm; /* receive control character mask */ - ushort scc_rccr; /* receive control character register */ - ushort scc_rlbc; /* receive last break character */ -} scc_uart_t; - -/* SCC Event and Mask registers when it is used as a UART. -*/ -#define UART_SCCM_GLR ((ushort)0x1000) -#define UART_SCCM_GLT ((ushort)0x0800) -#define UART_SCCM_AB ((ushort)0x0200) -#define UART_SCCM_IDL ((ushort)0x0100) -#define UART_SCCM_GRA ((ushort)0x0080) -#define UART_SCCM_BRKE ((ushort)0x0040) -#define UART_SCCM_BRKS ((ushort)0x0020) -#define UART_SCCM_CCR ((ushort)0x0008) -#define UART_SCCM_BSY ((ushort)0x0004) -#define UART_SCCM_TX ((ushort)0x0002) -#define UART_SCCM_RX ((ushort)0x0001) - -/* The SCC PMSR when used as a UART. -*/ -#define SCU_PMSR_FLC ((ushort)0x8000) -#define SCU_PMSR_SL ((ushort)0x4000) -#define SCU_PMSR_CL ((ushort)0x3000) -#define SCU_PMSR_UM ((ushort)0x0c00) -#define SCU_PMSR_FRZ ((ushort)0x0200) -#define SCU_PMSR_RZS ((ushort)0x0100) -#define SCU_PMSR_SYN ((ushort)0x0080) -#define SCU_PMSR_DRT ((ushort)0x0040) -#define SCU_PMSR_PEN ((ushort)0x0010) -#define SCU_PMSR_RPM ((ushort)0x000c) -#define SCU_PMSR_REVP ((ushort)0x0008) -#define SCU_PMSR_TPM ((ushort)0x0003) -#define SCU_PMSR_TEVP ((ushort)0x0003) - -/* CPM Transparent mode SCC. - */ -typedef struct scc_trans { - sccp_t st_genscc; - uint st_cpres; /* Preset CRC */ - uint st_cmask; /* Constant mask for CRC */ -} scc_trans_t; - -#define BD_SCC_TX_LAST ((ushort)0x0800) - - - -/* CPM interrupts. There are nearly 32 interrupts generated by CPM - * channels or devices. All of these are presented to the PPC core - * as a single interrupt. The CPM interrupt handler dispatches its - * own handlers, in a similar fashion to the PPC core handler. We - * use the table as defined in the manuals (i.e. no special high - * priority and SCC1 == SCCa, etc...). - */ -/* #define CPMVEC_NR 32 */ -/* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */ -/* #define CPMVEC_SCC1 ((ushort)0x1e) */ -/* #define CPMVEC_SCC2 ((ushort)0x1d) */ -/* #define CPMVEC_SCC3 ((ushort)0x1c) */ -/* #define CPMVEC_SCC4 ((ushort)0x1b) */ -/* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */ -/* #define CPMVEC_TIMER1 ((ushort)0x19) */ -/* #define CPMVEC_PIO_PC13 ((ushort)0x18) */ -/* #define CPMVEC_PIO_PC12 ((ushort)0x17) */ -/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ -/* #define CPMVEC_IDMA1 ((ushort)0x15) */ -/* #define CPMVEC_IDMA2 ((ushort)0x14) */ -/* #define CPMVEC_TIMER2 ((ushort)0x12) */ -/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ -/* #define CPMVEC_I2C ((ushort)0x10) */ -/* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */ -/* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */ -/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ -/* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */ -/* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */ -/* #define CPMVEC_PIO_PC7 ((ushort)0x09) */ -/* #define CPMVEC_TIMER4 ((ushort)0x07) */ -/* #define CPMVEC_PIO_PC6 ((ushort)0x06) */ -/* #define CPMVEC_SPI ((ushort)0x05) */ -/* #define CPMVEC_SMC1 ((ushort)0x04) */ -/* #define CPMVEC_SMC2 ((ushort)0x03) */ -/* #define CPMVEC_PIO_PC5 ((ushort)0x02) */ -/* #define CPMVEC_PIO_PC4 ((ushort)0x01) */ -/* #define CPMVEC_ERROR ((ushort)0x00) */ - -extern void cpm_install_handler(int vec, irq_handler_t handler, void *dev_id); - -/* CPM interrupt configuration vector. -*/ -#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ -#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ -#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ -#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ -#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ -#define CICR_IEN ((uint)0x00000080) /* Int. enable */ -#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ -#endif /* __CPM_360__ */ diff --git a/arch/m68k/include/asm/m68360.h b/arch/m68k/include/asm/m68360.h deleted file mode 100644 index 4664180a3ab3..000000000000 --- a/arch/m68k/include/asm/m68360.h +++ /dev/null @@ -1,13 +0,0 @@ -#include -#include -#include -#include - -#ifdef CONFIG_M68360 - -#define CPM_INTERRUPT 4 - -/* see MC68360 User's Manual, p. 7-377 */ -#define CPM_VECTOR_BASE 0x04 /* 3 MSbits of CPM vector */ - -#endif /* CONFIG_M68360 */ diff --git a/arch/m68k/include/asm/m68360_enet.h b/arch/m68k/include/asm/m68360_enet.h deleted file mode 100644 index 4d04037c78a2..000000000000 --- a/arch/m68k/include/asm/m68360_enet.h +++ /dev/null @@ -1,177 +0,0 @@ -/*********************************** - * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ - *********************************** - * - *************************************** - * Definitions for the ETHERNET controllers - *************************************** - */ - -#ifndef __ETHER_H -#define __ETHER_H - -#include - -/* - * transmit BD's - */ -#define T_R 0x8000 /* ready bit */ -#define E_T_PAD 0x4000 /* short frame padding */ -#define T_W 0x2000 /* wrap bit */ -#define T_I 0x1000 /* interrupt on completion */ -#define T_L 0x0800 /* last in frame */ -#define T_TC 0x0400 /* transmit CRC (when last) */ - -#define T_DEF 0x0200 /* defer indication */ -#define T_HB 0x0100 /* heartbeat */ -#define T_LC 0x0080 /* error: late collision */ -#define T_RL 0x0040 /* error: retransmission limit */ -#define T_RC 0x003c /* retry count */ -#define T_UN 0x0002 /* error: underrun */ -#define T_CSL 0x0001 /* carier sense lost */ -#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL) - -/* - * receive BD's - */ -#define R_E 0x8000 /* buffer empty */ -#define R_W 0x2000 /* wrap bit */ -#define R_I 0x1000 /* interrupt on reception */ -#define R_L 0x0800 /* last BD in frame */ -#define R_F 0x0400 /* first BD in frame */ -#define R_M 0x0100 /* received because of promisc. mode */ - -#define R_LG 0x0020 /* frame too long */ -#define R_NO 0x0010 /* non-octet aligned */ -#define R_SH 0x0008 /* short frame */ -#define R_CR 0x0004 /* receive CRC error */ -#define R_OV 0x0002 /* receive overrun */ -#define R_CL 0x0001 /* collision */ -#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL) - - -/* - * ethernet interrupts - */ -#define ETHERNET_GRA 0x0080 /* graceful stop complete */ -#define ETHERNET_TXE 0x0010 /* transmit error */ -#define ETHERNET_RXF 0x0008 /* receive frame */ -#define ETHERNET_BSY 0x0004 /* busy condition */ -#define ETHERNET_TXB 0x0002 /* transmit buffer */ -#define ETHERNET_RXB 0x0001 /* receive buffer */ - -/* - * ethernet protocol specific mode register (PSMR) - */ -#define ETHER_HBC 0x8000 /* heartbeat checking */ -#define ETHER_FC 0x4000 /* force collision */ -#define ETHER_RSH 0x2000 /* receive short frames */ -#define ETHER_IAM 0x1000 /* individual address mode */ -#define ETHER_CRC_32 (0x2<<10) /* Enable CRC */ -#define ETHER_PRO 0x0200 /* promiscuous */ -#define ETHER_BRO 0x0100 /* broadcast address */ -#define ETHER_SBT 0x0080 /* stop backoff timer */ -#define ETHER_LPB 0x0040 /* Loop Back Mode */ -#define ETHER_SIP 0x0020 /* sample input pins */ -#define ETHER_LCW 0x0010 /* late collision window */ -#define ETHER_NIB_13 (0x0<<1) /* # of ignored bits 13 */ -#define ETHER_NIB_14 (0x1<<1) /* # of ignored bits 14 */ -#define ETHER_NIB_15 (0x2<<1) /* # of ignored bits 15 */ -#define ETHER_NIB_16 (0x3<<1) /* # of ignored bits 16 */ -#define ETHER_NIB_21 (0x4<<1) /* # of ignored bits 21 */ -#define ETHER_NIB_22 (0x5<<1) /* # of ignored bits 22 */ -#define ETHER_NIB_23 (0x6<<1) /* # of ignored bits 23 */ -#define ETHER_NIB_24 (0x7<<1) /* # of ignored bits 24 */ - -/* - * ethernet specific parameters - */ -#define CRC_WORD 4 /* Length in bytes of CRC */ -#define C_PRES 0xffffffff /* preform 32 bit CRC */ -#define C_MASK 0xdebb20e3 /* comply with 32 bit CRC */ -#define CRCEC 0x00000000 -#define ALEC 0x00000000 -#define DISFC 0x00000000 -#define PADS 0x00000000 -#define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */ -#define ETH_MFLR 0x05ee /* 1518 max frame size */ -#define MINFLR 0x0040 /* Minimum frame size 64 */ -#define MAXD1 0x05ee /* Max dma count 1518 */ -#define MAXD2 0x05ee -#define GADDR1 0x00000000 /* Clear group address */ -#define GADDR2 0x00000000 -#define GADDR3 0x00000000 -#define GADDR4 0x00000000 -#define P_PER 0x00000000 /*not used */ -#define IADDR1 0x00000000 /* Individual hash table not used */ -#define IADDR2 0x00000000 -#define IADDR3 0x00000000 -#define IADDR4 0x00000000 -#define TADDR_H 0x00000000 /* clear this regs */ -#define TADDR_M 0x00000000 -#define TADDR_L 0x00000000 - -/* SCC Parameter Ram */ -#define RFCR 0x18 /* normal operation */ -#define TFCR 0x18 /* normal operation */ -#define E_MRBLR 1518 /* Max ethernet frame length */ - -/* - * ethernet specific structure - */ -typedef union { - unsigned char b[6]; - struct { - unsigned short high; - unsigned short middl; - unsigned short low; - } w; -} ETHER_ADDR; - -typedef struct { - int max_frame_length; - int promisc_mode; - int reject_broadcast; - ETHER_ADDR phys_adr; -} ETHER_SPECIFIC; - -typedef struct { - ETHER_ADDR dst_addr; - ETHER_ADDR src_addr; - unsigned short type_or_len; - unsigned char data[1]; -} ETHER_FRAME; - -#define MAX_DATALEN 1500 -typedef struct { - ETHER_ADDR dst_addr; - ETHER_ADDR src_addr; - unsigned short type_or_len; - unsigned char data[MAX_DATALEN]; - unsigned char fcs[CRC_WORD]; -} ETHER_MAX_FRAME; - - -/* - * Internal ethernet function prototypes - */ -void ether_interrupt(int scc_num); -/* mleslie: debug */ -/* static void ethernet_rx_internal(int scc_num); */ -/* static void ethernet_tx_internal(int scc_num); */ - -/* - * User callable routines prototypes (ethernet specific) - */ -void ethernet_init(int scc_number, - alloc_routine *alloc_buffer, - free_routine *free_buffer, - store_rx_buffer_routine *store_rx_buffer, - handle_tx_error_routine *handle_tx_error, - handle_rx_error_routine *handle_rx_error, - handle_lost_error_routine *handle_lost_error, - ETHER_SPECIFIC *ether_spec); -int ethernet_tx(int scc_number, void *buf, int length); - -#endif - diff --git a/arch/m68k/include/asm/m68360_pram.h b/arch/m68k/include/asm/m68360_pram.h deleted file mode 100644 index c0cbd96f09bc..000000000000 --- a/arch/m68k/include/asm/m68360_pram.h +++ /dev/null @@ -1,431 +0,0 @@ -/*********************************** - * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ - *********************************** - * - *************************************** - * Definitions of the parameter area RAM. - * Note that different structures are overlaid - * at the same offsets for the different modes - * of operation. - *************************************** - */ - -#ifndef __PRAM_H -#define __PRAM_H - -/* Time slot assignment table */ -#define VALID_SLOT 0x8000 -#define WRAP_SLOT 0x4000 - -/***************************************************************** - Global Multichannel parameter RAM -*****************************************************************/ -struct global_multi_pram { - /* - * Global Multichannel parameter RAM - */ - unsigned long mcbase; /* Multichannel Base pointer */ - unsigned short qmcstate; /* Multichannel Controller state */ - unsigned short mrblr; /* Maximum Receive Buffer Length */ - unsigned short tx_s_ptr; /* TSTATx Pointer */ - unsigned short rxptr; /* Current Time slot entry in TSATRx */ - unsigned short grfthr; /* Global Receive frame threshold */ - unsigned short grfcnt; /* Global Receive Frame Count */ - unsigned long intbase; /* Multichannel Base address */ - unsigned long iintptr; /* Pointer to interrupt queue */ - unsigned short rx_s_ptr; /* TSTARx Pointer */ - - unsigned short txptr; /* Current Time slot entry in TSATTx */ - unsigned long c_mask32; /* CRC Constant (debb20e3) */ - unsigned short tsatrx[32]; /* Time Slot Assignment Table Rx */ - unsigned short tsattx[32]; /* Time Slot Assignment Table Tx */ - unsigned short c_mask16; /* CRC Constant (f0b8) */ -}; - -/***************************************************************** - Quicc32 HDLC parameter RAM -*****************************************************************/ -struct quicc32_pram { - - unsigned short tbase; /* Tx Buffer Descriptors Base Address */ - unsigned short chamr; /* Channel Mode Register */ - unsigned long tstate; /* Tx Internal State */ - unsigned long txintr; /* Tx Internal Data Pointer */ - unsigned short tbptr; /* Tx Buffer Descriptor Pointer */ - unsigned short txcntr; /* Tx Internal Byte Count */ - unsigned long tupack; /* (Tx Temp) */ - unsigned long zistate; /* Zero Insertion machine state */ - unsigned long tcrc; /* Temp Transmit CRC */ - unsigned short intmask; /* Channel's interrupt mask flags */ - unsigned short bdflags; - unsigned short rbase; /* Rx Buffer Descriptors Base Address */ - unsigned short mflr; /* Max Frame Length Register */ - unsigned long rstate; /* Rx Internal State */ - unsigned long rxintr; /* Rx Internal Data Pointer */ - unsigned short rbptr; /* Rx Buffer Descriptor Pointer */ - unsigned short rxbyc; /* Rx Internal Byte Count */ - unsigned long rpack; /* (Rx Temp) */ - unsigned long zdstate; /* Zero Deletion machine state */ - unsigned long rcrc; /* Temp Transmit CRC */ - unsigned short maxc; /* Max_length counter */ - unsigned short tmp_mb; /* Temp */ -}; - - -/***************************************************************** - HDLC parameter RAM -*****************************************************************/ - -struct hdlc_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * HDLC specific parameter RAM - */ - unsigned char RESERVED1[4]; /* Reserved area */ - unsigned long c_mask; /* CRC constant */ - unsigned long c_pres; /* CRC preset */ - unsigned short disfc; /* discarded frame counter */ - unsigned short crcec; /* CRC error counter */ - unsigned short abtsc; /* abort sequence counter */ - unsigned short nmarc; /* nonmatching address rx cnt */ - unsigned short retrc; /* frame retransmission cnt */ - unsigned short mflr; /* maximum frame length reg */ - unsigned short max_cnt; /* maximum length counter */ - unsigned short rfthr; /* received frames threshold */ - unsigned short rfcnt; /* received frames count */ - unsigned short hmask; /* user defined frm addr mask */ - unsigned short haddr1; /* user defined frm address 1 */ - unsigned short haddr2; /* user defined frm address 2 */ - unsigned short haddr3; /* user defined frm address 3 */ - unsigned short haddr4; /* user defined frm address 4 */ - unsigned short tmp; /* temp */ - unsigned short tmp_mb; /* temp */ -}; - - - -/***************************************************************** - UART parameter RAM -*****************************************************************/ - -/* - * bits in uart control characters table - */ -#define CC_INVALID 0x8000 /* control character is valid */ -#define CC_REJ 0x4000 /* don't store char in buffer */ -#define CC_CHAR 0x00ff /* control character */ - -/* UART */ -struct uart_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rx_temp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * UART specific parameter RAM - */ - unsigned char RESERVED1[8]; /* Reserved area */ - unsigned short max_idl; /* maximum idle characters */ - unsigned short idlc; /* rx idle counter (internal) */ - unsigned short brkcr; /* break count register */ - - unsigned short parec; /* Rx parity error counter */ - unsigned short frmer; /* Rx framing error counter */ - unsigned short nosec; /* Rx noise counter */ - unsigned short brkec; /* Rx break character counter */ - unsigned short brkln; /* Receive break length */ - - unsigned short uaddr1; /* address character 1 */ - unsigned short uaddr2; /* address character 2 */ - unsigned short rtemp; /* temp storage */ - unsigned short toseq; /* Tx out of sequence char */ - unsigned short cc[8]; /* Rx control characters */ - unsigned short rccm; /* Rx control char mask */ - unsigned short rccr; /* Rx control char register */ - unsigned short rlbc; /* Receive last break char */ -}; - - - -/***************************************************************** - BISYNC parameter RAM -*****************************************************************/ - -struct bisync_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * BISYNC specific parameter RAM - */ - unsigned char RESERVED1[4]; /* Reserved area */ - unsigned long crcc; /* CRC Constant Temp Value */ - unsigned short prcrc; /* Preset Receiver CRC-16/LRC */ - unsigned short ptcrc; /* Preset Transmitter CRC-16/LRC */ - unsigned short parec; /* Receive Parity Error Counter */ - unsigned short bsync; /* BISYNC SYNC Character */ - unsigned short bdle; /* BISYNC DLE Character */ - unsigned short cc[8]; /* Rx control characters */ - unsigned short rccm; /* Receive Control Character Mask */ -}; - -/***************************************************************** - IOM2 parameter RAM - (overlaid on tx bd[5] of SCC channel[2]) -*****************************************************************/ -struct iom2_pram { - unsigned short ci_data; /* ci data */ - unsigned short monitor_data; /* monitor data */ - unsigned short tstate; /* transmitter state */ - unsigned short rstate; /* receiver state */ -}; - -/***************************************************************** - SPI/SMC parameter RAM - (overlaid on tx bd[6,7] of SCC channel[2]) -*****************************************************************/ - -#define SPI_R 0x8000 /* Ready bit in BD */ - -struct spi_pram { - unsigned short rbase; /* Rx BD Base Address */ - unsigned short tbase; /* Tx BD Base Address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ -}; - -struct smc_uart_pram { - unsigned short rbase; /* Rx BD Base Address */ - unsigned short tbase; /* Tx BD Base Address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned short max_idl; /* Maximum IDLE Characters */ - unsigned short idlc; /* Temporary IDLE Counter */ - unsigned short brkln; /* Last Rx Break Length */ - unsigned short brkec; /* Rx Break Condition Counter */ - unsigned short brkcr; /* Break Count Register (Tx) */ - unsigned short r_mask; /* Temporary bit mask */ -}; - -struct smc_trnsp_pram { - unsigned short rbase; /* rx BD Base Address */ - unsigned short tbase; /* Tx BD Base Address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned short reserved[5]; /* Reserved */ -}; - -struct idma_pram { - unsigned short ibase; /* IDMA BD Base Address */ - unsigned short ibptr; /* IDMA buffer descriptor pointer */ - unsigned long istate; /* IDMA internal state */ - unsigned long itemp; /* IDMA temp */ -}; - -struct ethernet_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * ETHERNET specific parameter RAM - */ - unsigned long c_pres; /* preset CRC */ - unsigned long c_mask; /* constant mask for CRC */ - unsigned long crcec; /* CRC error counter */ - unsigned long alec; /* alignment error counter */ - unsigned long disfc; /* discard frame counter */ - unsigned short pads; /* short frame PAD characters */ - unsigned short ret_lim; /* retry limit threshold */ - unsigned short ret_cnt; /* retry limit counter */ - unsigned short mflr; /* maximum frame length reg */ - unsigned short minflr; /* minimum frame length reg */ - unsigned short maxd1; /* maximum DMA1 length reg */ - unsigned short maxd2; /* maximum DMA2 length reg */ - unsigned short maxd; /* rx max DMA */ - unsigned short dma_cnt; /* rx dma counter */ - unsigned short max_b; /* max bd byte count */ - unsigned short gaddr1; /* group address filter 1 */ - unsigned short gaddr2; /* group address filter 2 */ - unsigned short gaddr3; /* group address filter 3 */ - unsigned short gaddr4; /* group address filter 4 */ - unsigned long tbuf0_data0; /* save area 0 - current frm */ - unsigned long tbuf0_data1; /* save area 1 - current frm */ - unsigned long tbuf0_rba0; - unsigned long tbuf0_crc; - unsigned short tbuf0_bcnt; - union { - unsigned char b[6]; - struct { - unsigned short high; - unsigned short middl; - unsigned short low; - } w; - } paddr; - unsigned short p_per; /* persistence */ - unsigned short rfbd_ptr; /* rx first bd pointer */ - unsigned short tfbd_ptr; /* tx first bd pointer */ - unsigned short tlbd_ptr; /* tx last bd pointer */ - unsigned long tbuf1_data0; /* save area 0 - next frame */ - unsigned long tbuf1_data1; /* save area 1 - next frame */ - unsigned long tbuf1_rba0; - unsigned long tbuf1_crc; - unsigned short tbuf1_bcnt; - unsigned short tx_len; /* tx frame length counter */ - unsigned short iaddr1; /* individual address filter 1*/ - unsigned short iaddr2; /* individual address filter 2*/ - unsigned short iaddr3; /* individual address filter 3*/ - unsigned short iaddr4; /* individual address filter 4*/ - unsigned short boff_cnt; /* back-off counter */ - unsigned short taddr_h; /* temp address (MSB) */ - unsigned short taddr_m; /* temp address */ - unsigned short taddr_l; /* temp address (LSB) */ -}; - -struct transparent_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * TRANSPARENT specific parameter RAM - */ - unsigned long crc_p; /* CRC Preset */ - unsigned long crc_c; /* CRC constant */ -}; - -struct timer_pram { - /* - * RISC timers parameter RAM - */ - unsigned short tm_base; /* RISC timer table base adr */ - unsigned short tm_ptr; /* RISC timer table pointer */ - unsigned short r_tmr; /* RISC timer mode register */ - unsigned short r_tmv; /* RISC timer valid register */ - unsigned long tm_cmd; /* RISC timer cmd register */ - unsigned long tm_cnt; /* RISC timer internal cnt */ -}; - -#endif diff --git a/arch/m68k/include/asm/m68360_quicc.h b/arch/m68k/include/asm/m68360_quicc.h deleted file mode 100644 index 59414cc108d3..000000000000 --- a/arch/m68k/include/asm/m68360_quicc.h +++ /dev/null @@ -1,362 +0,0 @@ -/*********************************** - * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ - *********************************** - * - *************************************** - * Definitions of QUICC memory structures - *************************************** - */ - -#ifndef __M68360_QUICC_H -#define __M68360_QUICC_H - -/* - * include registers and - * parameter ram definitions files - */ -#include -#include - - - -/* Buffer Descriptors */ -typedef struct quicc_bd { - volatile unsigned short status; - volatile unsigned short length; - volatile unsigned char *buf; /* WARNING: This is only true if *char is 32 bits */ -} QUICC_BD; - - -#ifdef MOTOROLA_ORIGINAL -struct user_data { - /* BASE + 0x000: user data memory */ - volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/ - volatile unsigned char udata_bd[0x200]; /*user data Ucode */ - volatile unsigned char ucode_ext[0x100]; /*Ucode Extension ram */ - volatile unsigned char RESERVED1[0x500]; /* Reserved area */ -}; -#else -struct user_data { - /* BASE + 0x000: user data memory */ - volatile unsigned char udata_bd_ucode[0x400]; /* user data, bds, Ucode*/ - volatile unsigned char udata_bd1[0x200]; /* user, bds */ - volatile unsigned char ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */ - volatile unsigned char udata_bd2[0x100]; /* user, bds */ - volatile unsigned char RESERVED1[0x400]; /* Reserved area */ -}; -#endif - - -/* - * internal ram - */ -typedef struct quicc { - union { - struct quicc32_pram ch_pram_tbl[32]; /* 32*64(bytes) per channel */ - struct user_data u; - }ch_or_u; /* multipul or user space */ - - /* BASE + 0xc00: PARAMETER RAM */ - union { - struct scc_pram { - union { - struct hdlc_pram h; - struct uart_pram u; - struct bisync_pram b; - struct transparent_pram t; - unsigned char RESERVED66[0x70]; - } pscc; /* scc parameter area (protocol dependent) */ - union { - struct { - unsigned char RESERVED70[0x10]; - struct spi_pram spi; - unsigned char RESERVED72[0x8]; - struct timer_pram timer; - } timer_spi; - struct { - struct idma_pram idma; - unsigned char RESERVED67[0x4]; - union { - struct smc_uart_pram u; - struct smc_trnsp_pram t; - } psmc; - } idma_smc; - } pothers; - } scc; - struct ethernet_pram enet_scc; - struct global_multi_pram m; - unsigned char pr[0x100]; - } pram[4]; - - /* reserved */ - - /* BASE + 0x1000: INTERNAL REGISTERS */ - /* SIM */ - volatile unsigned long sim_mcr; /* module configuration reg */ - volatile unsigned short sim_simtr; /* module test register */ - volatile unsigned char RESERVED2[0x2]; /* Reserved area */ - volatile unsigned char sim_avr; /* auto vector reg */ - volatile unsigned char sim_rsr; /* reset status reg */ - volatile unsigned char RESERVED3[0x2]; /* Reserved area */ - volatile unsigned char sim_clkocr; /* CLCO control register */ - volatile unsigned char RESERVED62[0x3]; /* Reserved area */ - volatile unsigned short sim_pllcr; /* PLL control register */ - volatile unsigned char RESERVED63[0x2]; /* Reserved area */ - volatile unsigned short sim_cdvcr; /* Clock devider control register */ - volatile unsigned short sim_pepar; /* Port E pin assignment register */ - volatile unsigned char RESERVED64[0xa]; /* Reserved area */ - volatile unsigned char sim_sypcr; /* system protection control*/ - volatile unsigned char sim_swiv; /* software interrupt vector*/ - volatile unsigned char RESERVED6[0x2]; /* Reserved area */ - volatile unsigned short sim_picr; /* periodic interrupt control reg */ - volatile unsigned char RESERVED7[0x2]; /* Reserved area */ - volatile unsigned short sim_pitr; /* periodic interrupt timing reg */ - volatile unsigned char RESERVED8[0x3]; /* Reserved area */ - volatile unsigned char sim_swsr; /* software service */ - volatile unsigned long sim_bkar; /* breakpoint address register*/ - volatile unsigned long sim_bkcr; /* breakpoint control register*/ - volatile unsigned char RESERVED10[0x8]; /* Reserved area */ - /* MEMC */ - volatile unsigned long memc_gmr; /* Global memory register */ - volatile unsigned short memc_mstat; /* MEMC status register */ - volatile unsigned char RESERVED11[0xa]; /* Reserved area */ - volatile unsigned long memc_br0; /* base register 0 */ - volatile unsigned long memc_or0; /* option register 0 */ - volatile unsigned char RESERVED12[0x8]; /* Reserved area */ - volatile unsigned long memc_br1; /* base register 1 */ - volatile unsigned long memc_or1; /* option register 1 */ - volatile unsigned char RESERVED13[0x8]; /* Reserved area */ - volatile unsigned long memc_br2; /* base register 2 */ - volatile unsigned long memc_or2; /* option register 2 */ - volatile unsigned char RESERVED14[0x8]; /* Reserved area */ - volatile unsigned long memc_br3; /* base register 3 */ - volatile unsigned long memc_or3; /* option register 3 */ - volatile unsigned char RESERVED15[0x8]; /* Reserved area */ - volatile unsigned long memc_br4; /* base register 3 */ - volatile unsigned long memc_or4; /* option register 3 */ - volatile unsigned char RESERVED16[0x8]; /* Reserved area */ - volatile unsigned long memc_br5; /* base register 3 */ - volatile unsigned long memc_or5; /* option register 3 */ - volatile unsigned char RESERVED17[0x8]; /* Reserved area */ - volatile unsigned long memc_br6; /* base register 3 */ - volatile unsigned long memc_or6; /* option register 3 */ - volatile unsigned char RESERVED18[0x8]; /* Reserved area */ - volatile unsigned long memc_br7; /* base register 3 */ - volatile unsigned long memc_or7; /* option register 3 */ - volatile unsigned char RESERVED9[0x28]; /* Reserved area */ - /* TEST */ - volatile unsigned short test_tstmra; /* master shift a */ - volatile unsigned short test_tstmrb; /* master shift b */ - volatile unsigned short test_tstsc; /* shift count */ - volatile unsigned short test_tstrc; /* repetition counter */ - volatile unsigned short test_creg; /* control */ - volatile unsigned short test_dreg; /* destributed register */ - volatile unsigned char RESERVED58[0x404]; /* Reserved area */ - /* IDMA1 */ - volatile unsigned short idma_iccr; /* channel configuration reg*/ - volatile unsigned char RESERVED19[0x2]; /* Reserved area */ - volatile unsigned short idma1_cmr; /* dma mode reg */ - volatile unsigned char RESERVED68[0x2]; /* Reserved area */ - volatile unsigned long idma1_sapr; /* dma source addr ptr */ - volatile unsigned long idma1_dapr; /* dma destination addr ptr */ - volatile unsigned long idma1_bcr; /* dma byte count reg */ - volatile unsigned char idma1_fcr; /* function code reg */ - volatile unsigned char RESERVED20; /* Reserved area */ - volatile unsigned char idma1_cmar; /* channel mask reg */ - volatile unsigned char RESERVED21; /* Reserved area */ - volatile unsigned char idma1_csr; /* channel status reg */ - volatile unsigned char RESERVED22[0x3]; /* Reserved area */ - /* SDMA */ - volatile unsigned char sdma_sdsr; /* status reg */ - volatile unsigned char RESERVED23; /* Reserved area */ - volatile unsigned short sdma_sdcr; /* configuration reg */ - volatile unsigned long sdma_sdar; /* address reg */ - /* IDMA2 */ - volatile unsigned char RESERVED69[0x2]; /* Reserved area */ - volatile unsigned short idma2_cmr; /* dma mode reg */ - volatile unsigned long idma2_sapr; /* dma source addr ptr */ - volatile unsigned long idma2_dapr; /* dma destination addr ptr */ - volatile unsigned long idma2_bcr; /* dma byte count reg */ - volatile unsigned char idma2_fcr; /* function code reg */ - volatile unsigned char RESERVED24; /* Reserved area */ - volatile unsigned char idma2_cmar; /* channel mask reg */ - volatile unsigned char RESERVED25; /* Reserved area */ - volatile unsigned char idma2_csr; /* channel status reg */ - volatile unsigned char RESERVED26[0x7]; /* Reserved area */ - /* Interrupt Controller */ - volatile unsigned long intr_cicr; /* CP interrupt configuration reg*/ - volatile unsigned long intr_cipr; /* CP interrupt pending reg */ - volatile unsigned long intr_cimr; /* CP interrupt mask reg */ - volatile unsigned long intr_cisr; /* CP interrupt in service reg*/ - /* Parallel I/O */ - volatile unsigned short pio_padir; /* port A data direction reg */ - volatile unsigned short pio_papar; /* port A pin assignment reg */ - volatile unsigned short pio_paodr; /* port A open drain reg */ - volatile unsigned short pio_padat; /* port A data register */ - volatile unsigned char RESERVED28[0x8]; /* Reserved area */ - volatile unsigned short pio_pcdir; /* port C data direction reg*/ - volatile unsigned short pio_pcpar; /* port C pin assignment reg*/ - volatile unsigned short pio_pcso; /* port C special options */ - volatile unsigned short pio_pcdat; /* port C data register */ - volatile unsigned short pio_pcint; /* port C interrupt cntrl reg */ - volatile unsigned char RESERVED29[0x16]; /* Reserved area */ - /* Timer */ - volatile unsigned short timer_tgcr; /* timer global configuration reg */ - volatile unsigned char RESERVED30[0xe]; /* Reserved area */ - volatile unsigned short timer_tmr1; /* timer 1 mode reg */ - volatile unsigned short timer_tmr2; /* timer 2 mode reg */ - volatile unsigned short timer_trr1; /* timer 1 referance reg */ - volatile unsigned short timer_trr2; /* timer 2 referance reg */ - volatile unsigned short timer_tcr1; /* timer 1 capture reg */ - volatile unsigned short timer_tcr2; /* timer 2 capture reg */ - volatile unsigned short timer_tcn1; /* timer 1 counter reg */ - volatile unsigned short timer_tcn2; /* timer 2 counter reg */ - volatile unsigned short timer_tmr3; /* timer 3 mode reg */ - volatile unsigned short timer_tmr4; /* timer 4 mode reg */ - volatile unsigned short timer_trr3; /* timer 3 referance reg */ - volatile unsigned short timer_trr4; /* timer 4 referance reg */ - volatile unsigned short timer_tcr3; /* timer 3 capture reg */ - volatile unsigned short timer_tcr4; /* timer 4 capture reg */ - volatile unsigned short timer_tcn3; /* timer 3 counter reg */ - volatile unsigned short timer_tcn4; /* timer 4 counter reg */ - volatile unsigned short timer_ter1; /* timer 1 event reg */ - volatile unsigned short timer_ter2; /* timer 2 event reg */ - volatile unsigned short timer_ter3; /* timer 3 event reg */ - volatile unsigned short timer_ter4; /* timer 4 event reg */ - volatile unsigned char RESERVED34[0x8]; /* Reserved area */ - /* CP */ - volatile unsigned short cp_cr; /* command register */ - volatile unsigned char RESERVED35[0x2]; /* Reserved area */ - volatile unsigned short cp_rccr; /* main configuration reg */ - volatile unsigned char RESERVED37; /* Reserved area */ - volatile unsigned char cp_rmds; /* development support status reg */ - volatile unsigned long cp_rmdr; /* development support control reg */ - volatile unsigned short cp_rctr1; /* ram break register 1 */ - volatile unsigned short cp_rctr2; /* ram break register 2 */ - volatile unsigned short cp_rctr3; /* ram break register 3 */ - volatile unsigned short cp_rctr4; /* ram break register 4 */ - volatile unsigned char RESERVED59[0x2]; /* Reserved area */ - volatile unsigned short cp_rter; /* RISC timers event reg */ - volatile unsigned char RESERVED38[0x2]; /* Reserved area */ - volatile unsigned short cp_rtmr; /* RISC timers mask reg */ - volatile unsigned char RESERVED39[0x14]; /* Reserved area */ - /* BRG */ - union { - volatile unsigned long l; - struct { - volatile unsigned short BRGC_RESERV:14; - volatile unsigned short rst:1; - volatile unsigned short en:1; - volatile unsigned short extc:2; - volatile unsigned short atb:1; - volatile unsigned short cd:12; - volatile unsigned short div16:1; - } b; - } brgc[4]; /* BRG1-BRG4 configuration regs*/ - /* SCC registers */ - struct scc_regs { - union { - struct { - /* Low word. */ - volatile unsigned short GSMR_RESERV2:1; - volatile unsigned short edge:2; - volatile unsigned short tci:1; - volatile unsigned short tsnc:2; - volatile unsigned short rinv:1; - volatile unsigned short tinv:1; - volatile unsigned short tpl:3; - volatile unsigned short tpp:2; - volatile unsigned short tend:1; - volatile unsigned short tdcr:2; - volatile unsigned short rdcr:2; - volatile unsigned short renc:3; - volatile unsigned short tenc:3; - volatile unsigned short diag:2; - volatile unsigned short enr:1; - volatile unsigned short ent:1; - volatile unsigned short mode:4; - /* High word. */ - volatile unsigned short GSMR_RESERV1:14; - volatile unsigned short pri:1; - volatile unsigned short gde:1; - volatile unsigned short tcrc:2; - volatile unsigned short revd:1; - volatile unsigned short trx:1; - volatile unsigned short ttx:1; - volatile unsigned short cdp:1; - volatile unsigned short ctsp:1; - volatile unsigned short cds:1; - volatile unsigned short ctss:1; - volatile unsigned short tfl:1; - volatile unsigned short rfw:1; - volatile unsigned short txsy:1; - volatile unsigned short synl:2; - volatile unsigned short rtsm:1; - volatile unsigned short rsyn:1; - } b; - struct { - volatile unsigned long low; - volatile unsigned long high; - } w; - } scc_gsmr; /* SCC general mode reg */ - volatile unsigned short scc_psmr; /* protocol specific mode reg */ - volatile unsigned char RESERVED42[0x2]; /* Reserved area */ - volatile unsigned short scc_todr; /* SCC transmit on demand */ - volatile unsigned short scc_dsr; /* SCC data sync reg */ - volatile unsigned short scc_scce; /* SCC event reg */ - volatile unsigned char RESERVED43[0x2];/* Reserved area */ - volatile unsigned short scc_sccm; /* SCC mask reg */ - volatile unsigned char RESERVED44[0x1];/* Reserved area */ - volatile unsigned char scc_sccs; /* SCC status reg */ - volatile unsigned char RESERVED45[0x8]; /* Reserved area */ - } scc_regs[4]; - /* SMC */ - struct smc_regs { - volatile unsigned char RESERVED46[0x2]; /* Reserved area */ - volatile unsigned short smc_smcmr; /* SMC mode reg */ - volatile unsigned char RESERVED60[0x2]; /* Reserved area */ - volatile unsigned char smc_smce; /* SMC event reg */ - volatile unsigned char RESERVED47[0x3]; /* Reserved area */ - volatile unsigned char smc_smcm; /* SMC mask reg */ - volatile unsigned char RESERVED48[0x5]; /* Reserved area */ - } smc_regs[2]; - /* SPI */ - volatile unsigned short spi_spmode; /* SPI mode reg */ - volatile unsigned char RESERVED51[0x4]; /* Reserved area */ - volatile unsigned char spi_spie; /* SPI event reg */ - volatile unsigned char RESERVED52[0x3]; /* Reserved area */ - volatile unsigned char spi_spim; /* SPI mask reg */ - volatile unsigned char RESERVED53[0x2]; /* Reserved area */ - volatile unsigned char spi_spcom; /* SPI command reg */ - volatile unsigned char RESERVED54[0x4]; /* Reserved area */ - /* PIP */ - volatile unsigned short pip_pipc; /* pip configuration reg */ - volatile unsigned char RESERVED65[0x2]; /* Reserved area */ - volatile unsigned short pip_ptpr; /* pip timing parameters reg */ - volatile unsigned long pip_pbdir; /* port b data direction reg */ - volatile unsigned long pip_pbpar; /* port b pin assignment reg */ - volatile unsigned long pip_pbodr; /* port b open drain reg */ - volatile unsigned long pip_pbdat; /* port b data reg */ - volatile unsigned char RESERVED71[0x18]; /* Reserved area */ - /* Serial Interface */ - volatile unsigned long si_simode; /* SI mode register */ - volatile unsigned char si_sigmr; /* SI global mode register */ - volatile unsigned char RESERVED55; /* Reserved area */ - volatile unsigned char si_sistr; /* SI status register */ - volatile unsigned char si_sicmr; /* SI command register */ - volatile unsigned char RESERVED56[0x4]; /* Reserved area */ - volatile unsigned long si_sicr; /* SI clock routing */ - volatile unsigned long si_sirp; /* SI ram pointers */ - volatile unsigned char RESERVED57[0xc]; /* Reserved area */ - volatile unsigned short si_siram[0x80]; /* SI routing ram */ -} QUICC; - -#endif - -/* - * Local variables: - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * End: - */ diff --git a/arch/m68k/include/asm/m68360_regs.h b/arch/m68k/include/asm/m68360_regs.h deleted file mode 100644 index d57217ca4f27..000000000000 --- a/arch/m68k/include/asm/m68360_regs.h +++ /dev/null @@ -1,408 +0,0 @@ -/*********************************** - * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $ - *********************************** - * - *************************************** - * Definitions of the QUICC registers - *************************************** - */ - -#ifndef __REGISTERS_H -#define __REGISTERS_H - -#define CLEAR_BIT(x, bit) x =bit - -/***************************************************************** - Command Register -*****************************************************************/ - -/* bit fields within command register */ -#define SOFTWARE_RESET 0x8000 -#define CMD_OPCODE 0x0f00 -#define CMD_CHANNEL 0x00f0 -#define CMD_FLAG 0x0001 - -/* general command opcodes */ -#define INIT_RXTX_PARAMS 0x0000 -#define INIT_RX_PARAMS 0x0100 -#define INIT_TX_PARAMS 0x0200 -#define ENTER_HUNT_MODE 0x0300 -#define STOP_TX 0x0400 -#define GR_STOP_TX 0x0500 -#define RESTART_TX 0x0600 -#define CLOSE_RX_BD 0x0700 -#define SET_ENET_GROUP 0x0800 -#define RESET_ENET_GROUP 0x0900 - -/* quicc32 CP commands */ -#define STOP_TX_32 0x0e00 /*add chan# bits 2-6 */ -#define ENTER_HUNT_MODE_32 0x1e00 - -/* quicc32 mask/event SCC register */ -#define GOV 0x01 -#define GUN 0x02 -#define GINT 0x04 -#define IQOV 0x08 - - -/* Timer commands */ -#define SET_TIMER 0x0800 - -/* Multi channel Interrupt structure */ -#define INTR_VALID 0x8000 /* Valid interrupt entry */ -#define INTR_WRAP 0x4000 /* Wrap bit in the interrupt entry table */ -#define INTR_CH_NU 0x07c0 /* Channel Num in interrupt table */ -#define INTR_MASK_BITS 0x383f - -/* - * General SCC mode register (GSMR) - */ - -#define MODE_HDLC 0x0 -#define MODE_APPLE_TALK 0x2 -#define MODE_SS7 0x3 -#define MODE_UART 0x4 -#define MODE_PROFIBUS 0x5 -#define MODE_ASYNC_HDLC 0x6 -#define MODE_V14 0x7 -#define MODE_BISYNC 0x8 -#define MODE_DDCMP 0x9 -#define MODE_MULTI_CHANNEL 0xa -#define MODE_ETHERNET 0xc - -#define DIAG_NORMAL 0x0 -#define DIAG_LOCAL_LPB 0x1 -#define DIAG_AUTO_ECHO 0x2 -#define DIAG_LBP_ECHO 0x3 - -/* For RENC and TENC fields in GSMR */ -#define ENC_NRZ 0x0 -#define ENC_NRZI 0x1 -#define ENC_FM0 0x2 -#define ENC_MANCH 0x4 -#define ENC_DIFF_MANC 0x6 - -/* For TDCR and RDCR fields in GSMR */ -#define CLOCK_RATE_1 0x0 -#define CLOCK_RATE_8 0x1 -#define CLOCK_RATE_16 0x2 -#define CLOCK_RATE_32 0x3 - -#define TPP_00 0x0 -#define TPP_10 0x1 -#define TPP_01 0x2 -#define TPP_11 0x3 - -#define TPL_NO 0x0 -#define TPL_8 0x1 -#define TPL_16 0x2 -#define TPL_32 0x3 -#define TPL_48 0x4 -#define TPL_64 0x5 -#define TPL_128 0x6 - -#define TSNC_INFINITE 0x0 -#define TSNC_14_65 0x1 -#define TSNC_4_15 0x2 -#define TSNC_3_1 0x3 - -#define EDGE_BOTH 0x0 -#define EDGE_POS 0x1 -#define EDGE_NEG 0x2 -#define EDGE_NO 0x3 - -#define SYNL_NO 0x0 -#define SYNL_4 0x1 -#define SYNL_8 0x2 -#define SYNL_16 0x3 - -#define TCRC_CCITT16 0x0 -#define TCRC_CRC16 0x1 -#define TCRC_CCITT32 0x2 - - -/***************************************************************** - TODR (Transmit on demand) Register -*****************************************************************/ -#define TODR_TOD 0x8000 /* Transmit on demand */ - - -/***************************************************************** - CICR register settings -*****************************************************************/ - -/* note that relative irq priorities of the SCCs can be reordered - * if desired - see p. 7-377 of the MC68360UM */ -#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ -#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ -#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ -#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ - -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ -#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ -#define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */ -#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ - - -/***************************************************************** - Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379) -*****************************************************************/ - -#define INTR_PIO_PC0 0x80000000 /* parallel I/O C bit 0 */ -#define INTR_SCC1 0x40000000 /* SCC port 1 */ -#define INTR_SCC2 0x20000000 /* SCC port 2 */ -#define INTR_SCC3 0x10000000 /* SCC port 3 */ -#define INTR_SCC4 0x08000000 /* SCC port 4 */ -#define INTR_PIO_PC1 0x04000000 /* parallel i/o C bit 1 */ -#define INTR_TIMER1 0x02000000 /* timer 1 */ -#define INTR_PIO_PC2 0x01000000 /* parallel i/o C bit 2 */ -#define INTR_PIO_PC3 0x00800000 /* parallel i/o C bit 3 */ -#define INTR_SDMA_BERR 0x00400000 /* SDMA channel bus error */ -#define INTR_DMA1 0x00200000 /* idma 1 */ -#define INTR_DMA2 0x00100000 /* idma 2 */ -#define INTR_TIMER2 0x00040000 /* timer 2 */ -#define INTR_CP_TIMER 0x00020000 /* CP timer */ -#define INTR_PIP_STATUS 0x00010000 /* PIP status */ -#define INTR_PIO_PC4 0x00008000 /* parallel i/o C bit 4 */ -#define INTR_PIO_PC5 0x00004000 /* parallel i/o C bit 5 */ -#define INTR_TIMER3 0x00001000 /* timer 3 */ -#define INTR_PIO_PC6 0x00000800 /* parallel i/o C bit 6 */ -#define INTR_PIO_PC7 0x00000400 /* parallel i/o C bit 7 */ -#define INTR_PIO_PC8 0x00000200 /* parallel i/o C bit 8 */ -#define INTR_TIMER4 0x00000080 /* timer 4 */ -#define INTR_PIO_PC9 0x00000040 /* parallel i/o C bit 9 */ -#define INTR_SCP 0x00000020 /* SCP */ -#define INTR_SMC1 0x00000010 /* SMC 1 */ -#define INTR_SMC2 0x00000008 /* SMC 2 */ -#define INTR_PIO_PC10 0x00000004 /* parallel i/o C bit 10 */ -#define INTR_PIO_PC11 0x00000002 /* parallel i/o C bit 11 */ -#define INTR_ERR 0x00000001 /* error */ - - -/***************************************************************** - CPM Interrupt vector encodings (MC68360UM p. 7-376) -*****************************************************************/ - -#define CPMVEC_NR 32 -#define CPMVEC_PIO_PC0 0x1f -#define CPMVEC_SCC1 0x1e -#define CPMVEC_SCC2 0x1d -#define CPMVEC_SCC3 0x1c -#define CPMVEC_SCC4 0x1b -#define CPMVEC_PIO_PC1 0x1a -#define CPMVEC_TIMER1 0x19 -#define CPMVEC_PIO_PC2 0x18 -#define CPMVEC_PIO_PC3 0x17 -#define CPMVEC_SDMA_CB_ERR 0x16 -#define CPMVEC_IDMA1 0x15 -#define CPMVEC_IDMA2 0x14 -#define CPMVEC_RESERVED3 0x13 -#define CPMVEC_TIMER2 0x12 -#define CPMVEC_RISCTIMER 0x11 -#define CPMVEC_RESERVED2 0x10 -#define CPMVEC_PIO_PC4 0x0f -#define CPMVEC_PIO_PC5 0x0e -#define CPMVEC_TIMER3 0x0c -#define CPMVEC_PIO_PC6 0x0b -#define CPMVEC_PIO_PC7 0x0a -#define CPMVEC_PIO_PC8 0x09 -#define CPMVEC_RESERVED1 0x08 -#define CPMVEC_TIMER4 0x07 -#define CPMVEC_PIO_PC9 0x06 -#define CPMVEC_SPI 0x05 -#define CPMVEC_SMC1 0x04 -#define CPMVEC_SMC2 0x03 -#define CPMVEC_PIO_PC10 0x02 -#define CPMVEC_PIO_PC11 0x01 -#define CPMVEC_ERROR 0x00 - -/* #define CPMVEC_PIO_PC0 ((ushort)0x1f) */ -/* #define CPMVEC_SCC1 ((ushort)0x1e) */ -/* #define CPMVEC_SCC2 ((ushort)0x1d) */ -/* #define CPMVEC_SCC3 ((ushort)0x1c) */ -/* #define CPMVEC_SCC4 ((ushort)0x1b) */ -/* #define CPMVEC_PIO_PC1 ((ushort)0x1a) */ -/* #define CPMVEC_TIMER1 ((ushort)0x19) */ -/* #define CPMVEC_PIO_PC2 ((ushort)0x18) */ -/* #define CPMVEC_PIO_PC3 ((ushort)0x17) */ -/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ -/* #define CPMVEC_IDMA1 ((ushort)0x15) */ -/* #define CPMVEC_IDMA2 ((ushort)0x14) */ -/* #define CPMVEC_RESERVED3 ((ushort)0x13) */ -/* #define CPMVEC_TIMER2 ((ushort)0x12) */ -/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ -/* #define CPMVEC_RESERVED2 ((ushort)0x10) */ -/* #define CPMVEC_PIO_PC4 ((ushort)0x0f) */ -/* #define CPMVEC_PIO_PC5 ((ushort)0x0e) */ -/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ -/* #define CPMVEC_PIO_PC6 ((ushort)0x0b) */ -/* #define CPMVEC_PIO_PC7 ((ushort)0x0a) */ -/* #define CPMVEC_PIO_PC8 ((ushort)0x09) */ -/* #define CPMVEC_RESERVED1 ((ushort)0x08) */ -/* #define CPMVEC_TIMER4 ((ushort)0x07) */ -/* #define CPMVEC_PIO_PC9 ((ushort)0x06) */ -/* #define CPMVEC_SPI ((ushort)0x05) */ -/* #define CPMVEC_SMC1 ((ushort)0x04) */ -/* #define CPMVEC_SMC2 ((ushort)0x03) */ -/* #define CPMVEC_PIO_PC10 ((ushort)0x02) */ -/* #define CPMVEC_PIO_PC11 ((ushort)0x01) */ -/* #define CPMVEC_ERROR ((ushort)0x00) */ - - -/***************************************************************** - * PIO control registers - *****************************************************************/ - -/* Port A - See 360UM p. 7-358 - * - * Note that most of these pins have alternate functions - */ - - -/* The macros are nice, but there are all sorts of references to 1-indexed - * facilities on the 68360... */ -/* #define PA_RXD(n) ((ushort)(0x01<<(2*n))) */ -/* #define PA_TXD(n) ((ushort)(0x02<<(2*n))) */ - -#define PA_RXD1 ((ushort)0x0001) -#define PA_TXD1 ((ushort)0x0002) -#define PA_RXD2 ((ushort)0x0004) -#define PA_TXD2 ((ushort)0x0008) -#define PA_RXD3 ((ushort)0x0010) -#define PA_TXD3 ((ushort)0x0020) -#define PA_RXD4 ((ushort)0x0040) -#define PA_TXD4 ((ushort)0x0080) - -#define PA_CLK1 ((ushort)0x0100) -#define PA_CLK2 ((ushort)0x0200) -#define PA_CLK3 ((ushort)0x0400) -#define PA_CLK4 ((ushort)0x0800) -#define PA_CLK5 ((ushort)0x1000) -#define PA_CLK6 ((ushort)0x2000) -#define PA_CLK7 ((ushort)0x4000) -#define PA_CLK8 ((ushort)0x8000) - - -/* Port B - See 360UM p. 7-362 - */ - - -/* Port C - See 360UM p. 7-365 - */ - -#define PC_RTS1 ((ushort)0x0001) -#define PC_RTS2 ((ushort)0x0002) -#define PC__RTS3 ((ushort)0x0004) /* !RTS3 */ -#define PC__RTS4 ((ushort)0x0008) /* !RTS4 */ - -#define PC_CTS1 ((ushort)0x0010) -#define PC_CD1 ((ushort)0x0020) -#define PC_CTS2 ((ushort)0x0040) -#define PC_CD2 ((ushort)0x0080) -#define PC_CTS3 ((ushort)0x0100) -#define PC_CD3 ((ushort)0x0200) -#define PC_CTS4 ((ushort)0x0400) -#define PC_CD4 ((ushort)0x0800) - - - -/***************************************************************** - chip select option register -*****************************************************************/ -#define DTACK 0xe000 -#define ADR_MASK 0x1ffc -#define RDWR_MASK 0x0002 -#define FC_MASK 0x0001 - -/***************************************************************** - tbase and rbase registers -*****************************************************************/ -#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase)) -#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase)) -#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr)) -#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr)) -#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \ - ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) -#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \ - ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) -#define INCREASE_TBD(bd,quicc,pram) { \ - if((bd)->status & T_W) \ - (bd) = TBD_ADDR(quicc,pram); \ - else \ - (bd)++; \ -} -#define DECREASE_TBD(bd,quicc,pram) { \ - if ((bd) == TBD_ADDR(quicc, pram)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} -#define INCREASE_RBD(bd,quicc,pram) { \ - if((bd)->status & R_W) \ - (bd) = RBD_ADDR(quicc,pram); \ - else \ - (bd)++; \ -} -#define DECREASE_RBD(bd,quicc,pram) { \ - if ((bd) == RBD_ADDR(quicc, pram)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} - -/***************************************************************** - Macros for Multi channel -*****************************************************************/ -#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page]) -#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase) -#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \ - (&(quicc->ch_or_u.ch_pram_tbl[channel]))) -#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase))) -#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase))) -#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr))) -#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr))) -#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ - CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \ - ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) -#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ - CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \ - ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) - -#define INCREASE_TBD_32(bd,quicc,page,channel) { \ - if((bd)->status & T_W) \ - (bd) = TBD_32_ADDR(quicc,page,channel); \ - else \ - (bd)++; \ -} -#define DECREASE_TBD_32(bd,quicc,page,channel) { \ - if ((bd) == TBD_32_ADDR(quicc, page,channel)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} -#define INCREASE_RBD_32(bd,quicc,page,channel) { \ - if((bd)->status & R_W) \ - (bd) = RBD_32_ADDR(quicc,page,channel); \ - else \ - (bd)++; \ -} -#define DECREASE_RBD_32(bd,quicc,page,channel) { \ - if ((bd) == RBD_32_ADDR(quicc, page,channel)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} - -#endif diff --git a/arch/m68k/kernel/early_printk.c b/arch/m68k/kernel/early_printk.c index ff9708d71921..7d3fe08a48eb 100644 --- a/arch/m68k/kernel/early_printk.c +++ b/arch/m68k/kernel/early_printk.c @@ -20,8 +20,8 @@ asmlinkage void __init debug_cons_nputs(const char *s, unsigned n); static void __ref debug_cons_write(struct console *c, const char *s, unsigned n) { -#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68360) || \ - defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)) +#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68000) || \ + defined(CONFIG_COLDFIRE)) if (MACH_IS_MVME16x) mvme16x_cons_write(c, s, n); else @@ -52,8 +52,8 @@ early_param("earlyprintk", setup_early_printk); * debug_cons_nputs() defined in arch/m68k/kernel/head.S cannot be called * after init sections are discarded (for platforms that use it). */ -#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68360) || \ - defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)) +#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68000) || \ + defined(CONFIG_COLDFIRE)) static int __init unregister_early_console(void) { diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 76b9113f3092..9309789215a8 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -68,9 +68,6 @@ void (*mach_power_off)(void); #define CPU_NAME "MC68000" #endif #endif /* CONFIG_M68000 */ -#ifdef CONFIG_M68360 -#define CPU_NAME "MC68360" -#endif #ifndef CPU_NAME #define CPU_NAME "UNKNOWN" #endif @@ -209,10 +206,6 @@ void __init setup_arch(char **cmdline_p) #if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 ) printk(KERN_INFO "PalmV support by Lineo Inc. \n"); #endif -#if defined (CONFIG_M68360) - printk(KERN_INFO "QUICC port done by SED Systems ,\n"); - printk(KERN_INFO "based on 2.0.38 port by Lineo Inc. .\n"); -#endif #ifdef CONFIG_DRAGEN2 printk(KERN_INFO "DragonEngine II board support by Georges Menie\n"); #endif -- cgit v1.2.3