From ebaef649c26b44ff28114b452fd067a270ca7f02 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Sat, 14 Nov 2015 01:26:53 +0100 Subject: bpf, arm: start flushing icache range from header During review I noticed that the icache range we're flushing should start at header already and not at ctx.image. Reason is that after 55309dd3d4cd ("net: bpf: arm: address randomize and write protect JIT code"), we also want to make sure to flush the random-sized trap in front of the start of the actual program (analogous to x86). No operational differences from user side. Signed-off-by: Daniel Borkmann Tested-by: Nicolas Schichan Cc: Alexei Starovoitov Signed-off-by: David S. Miller --- arch/arm/net/bpf_jit_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 2f4b14cfddb4..591f9db3bf40 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -1061,7 +1061,7 @@ void bpf_jit_compile(struct bpf_prog *fp) } build_epilogue(&ctx); - flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx)); + flush_icache_range((u32)header, (u32)(ctx.target + ctx.idx)); #if __LINUX_ARM_ARCH__ < 7 if (ctx.imm_count) -- cgit v1.2.3 From facf47ee6b4d07d43c3bfd6f0762f1b28f64703a Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 16 Sep 2015 09:35:06 +0800 Subject: ARM: dts: imx27.dtsi: change the clock information for usb For imx27, it needs three clocks to let the controller work, the old code is wrong, and usbmisc has not included clock handling code any more. Without this patch, it will cause below data abort when accessing usbmisc registers. usbcore: registered new interface driver usb-storage Unhandled fault: external abort on non-linefetch (0x008) at 0xf4424600 pgd = c0004000 [f4424600] *pgd=10000452(bad) Internal error: : 8 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-next-20150701-dirty #3089 Hardware name: Freescale i.MX27 (Device Tree Support) task: c7832b60 ti: c783e000 task.ti: c783e000 PC is at usbmisc_imx27_init+0x4c/0xbc LR is at usbmisc_imx27_init+0x40/0xbc pc : [] lr : [] psr: 60000093 sp : c783fe08 ip : 00000000 fp : 00000000 r10: c0576434 r9 : 0000009c r8 : c7a773a0 r7 : 01000000 r6 : 60000013 r5 : c7a776f0 r4 : c7a773f0 r3 : f4424600 r2 : 00000000 r1 : 00000001 r0 : 00000001 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0005317f Table: a0004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc783e190) Stack: (0xc783fe08 to 0xc7840000) Signed-off-by: Peter Chen Reported-by: Fabio Estevam Tested-by: Fabio Estevam Cc: #v4.1+ Acked-by: Shawn Guo --- arch/arm/boot/dts/imx27.dtsi | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index feb9d34b239c..f818ea483aeb 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -486,7 +486,10 @@ compatible = "fsl,imx27-usb"; reg = <0x10024000 0x200>; interrupts = <56>; - clocks = <&clks IMX27_CLK_USB_IPG_GATE>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>, + <&clks IMX27_CLK_USB_AHB_GATE>, + <&clks IMX27_CLK_USB_DIV>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 0>; status = "disabled"; }; @@ -495,7 +498,10 @@ compatible = "fsl,imx27-usb"; reg = <0x10024200 0x200>; interrupts = <54>; - clocks = <&clks IMX27_CLK_USB_IPG_GATE>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>, + <&clks IMX27_CLK_USB_AHB_GATE>, + <&clks IMX27_CLK_USB_DIV>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 1>; dr_mode = "host"; status = "disabled"; @@ -505,7 +511,10 @@ compatible = "fsl,imx27-usb"; reg = <0x10024400 0x200>; interrupts = <55>; - clocks = <&clks IMX27_CLK_USB_IPG_GATE>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>, + <&clks IMX27_CLK_USB_AHB_GATE>, + <&clks IMX27_CLK_USB_DIV>; + clock-names = "ipg", "ahb", "per"; fsl,usbmisc = <&usbmisc 2>; dr_mode = "host"; status = "disabled"; @@ -515,7 +524,6 @@ #index-cells = <1>; compatible = "fsl,imx27-usbmisc"; reg = <0x10024600 0x200>; - clocks = <&clks IMX27_CLK_USB_AHB_GATE>; }; sahara2: sahara@10025000 { -- cgit v1.2.3 From 29f5b34ca1a191c2cf4f6c8c12f4dec56e8d3bc1 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 13 Nov 2015 17:29:53 +0100 Subject: arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data Add missing HWMOD_NO_IDLEST hwmod flag for entries not having omap4 clkctrl values. The emac0 hwmod flag fixes the davinci_emac driver probe since the return of pm_resume() call is now checked. This solves the following boot errors : [ 0.121429] omap_hwmod: l4_ls: _wait_target_ready failed: -16 [ 0.121441] omap_hwmod: l4_ls: cannot be enabled for reset (3) [ 0.124342] omap_hwmod: l4_hs: _wait_target_ready failed: -16 [ 0.124352] omap_hwmod: l4_hs: cannot be enabled for reset (3) [ 1.967228] omap_hwmod: emac0: _wait_target_ready failed: -16 Cc: Brian Hutchinson Signed-off-by: Neil Armstrong Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_81xx_data.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index b1288f56d509..6256052893ec 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -144,6 +144,7 @@ static struct omap_hwmod dm81xx_l4_ls_hwmod = { .name = "l4_ls", .clkdm_name = "alwon_l3s_clkdm", .class = &l4_hwmod_class, + .flags = HWMOD_NO_IDLEST, }; /* @@ -155,6 +156,7 @@ static struct omap_hwmod dm81xx_l4_hs_hwmod = { .name = "l4_hs", .clkdm_name = "alwon_l3_med_clkdm", .class = &l4_hwmod_class, + .flags = HWMOD_NO_IDLEST, }; /* L3 slow -> L4 ls peripheral interface running at 125MHz */ @@ -850,6 +852,7 @@ static struct omap_hwmod dm816x_emac0_hwmod = { .name = "emac0", .clkdm_name = "alwon_ethernet_clkdm", .class = &dm816x_emac_hwmod_class, + .flags = HWMOD_NO_IDLEST, }; static struct omap_hwmod_ocp_if dm81xx_l4_hs__emac0 = { -- cgit v1.2.3