From d1ad1b1483654ece16a3653592084c94a2bc1268 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 20 Nov 2016 21:24:55 +0200 Subject: ARM: s5pv210_defconfig: Remove old MACHs Remove non-existing MACH symbols from S5PV210 defconfig. Signed-off-by: Krzysztof Kozlowski --- arch/arm/configs/s5pv210_defconfig | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index fa989902236d..c51f0f02012b 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -9,10 +9,6 @@ CONFIG_ARCH_S5PV210=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_S3C_DEV_FB=y CONFIG_S5PV210_SETUP_FB_24BPP=y -CONFIG_MACH_AQUILA=y -CONFIG_MACH_GONI=y -CONFIG_MACH_SMDKC110=y -CONFIG_MACH_SMDKV210=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_VMSPLIT_2G=y -- cgit v1.2.3 From 74b0ee7579f279dae053053008d29f10f3890c07 Mon Sep 17 00:00:00 2001 From: Robie Basak Date: Mon, 19 Dec 2016 00:56:37 +0000 Subject: ARM: exynos_defconfig: Enable IP multicast Prior to Nikolay's commit dcd87999d, libnss-mdns (eg. to resolve "foo.local" on the LAN using mDNS) worked without CONFIG_IP_MULTICAST defined, but dcd87999d caused it to stop working without having CONFIG_IP_MULTICAST defined explicitly. Since exynos_defconfig did not previously define CONFIG_IP_MULTICAST, mDNS used to work for users building with just exynos_defconfig, but stopped working from dcd87999d. Define CONFIG_IP_MULTICAST explicitly in exynos_defconfig as it appears essential anyway. Signed-off-by: Robie Basak Signed-off-by: Krzysztof Kozlowski --- arch/arm/configs/exynos_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 79c415c33f69..12b8f69cbb52 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -43,6 +43,7 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y +CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -- cgit v1.2.3 From 11937f69b65b08d3184b1ebc864668be4b6c5427 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Tue, 13 Dec 2016 15:33:30 +0100 Subject: ARM: sunxi: Add CONFIG_THERMAL_OF This enables CONFIG_THERMAL_OF by default for sunxi_defconfig. It is required to get Allwinner SoCs' temperature from the GPADC driver. The Allwinner SoCs all have an ADC that can also act as a touchscreen controller and a thermal sensor. The first four channels can be used either for the ADC or the touchscreen and the fifth channel is used for the thermal sensor. The thermal sensor requires the IP to be in touchscreen mode to return correct values. Therefore, if the user is continuously reading the ADC channel(s), the thermal framework in which the thermal sensor is registered will switch the IP in touchscreen mode to get a temperature value and requires a delay of 100ms (because of the mode switching), then the ADC will switch back to ADC mode and requires also a delay of 100ms. If the ADC readings are critical to user and the SoC temperature is not, the GPADC driver is capable of not registering the thermal sensor in the thermal framework and thus, "quicken" the ADC readings. In most use cases, the SoC temperature is more critical (for cpu throttling for example or activating cooling devices) than ADC readings, thus it is now enabled by default. Signed-off-by: Quentin Schulz Signed-off-by: Maxime Ripard --- arch/arm/configs/sunxi_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index dfeee5c51b40..da92c25eb7cc 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -83,6 +83,7 @@ CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y CONFIG_AXP20X_POWER=y CONFIG_THERMAL=y +CONFIG_THERMAL_OF=y CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y -- cgit v1.2.3 From 88b00d2d78ad0581aa36944a69279d83d660c4f3 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 7 Dec 2016 11:31:35 -0800 Subject: ARM: davinci_all_defconfig: enable video capture as modules Enable media support and V4L2 capture, along with video decoders used on da850 platforms. Tested on da850-lcdk. Signed-off-by: Kevin Hilman Signed-off-by: Sekhar Nori --- arch/arm/configs/davinci_all_defconfig | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 8806754f7175..69e2a2379fc8 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -126,6 +126,12 @@ CONFIG_TPS6507X=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_TPS6507X=y +CONFIG_MEDIA_SUPPORT=m +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=m +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_TVP514X=m CONFIG_DRM=m CONFIG_DRM_TILCDC=m CONFIG_FB=y -- cgit v1.2.3 From c1cbd60fe071e88c12b5227cf9321b0d7c573253 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 31 Dec 2016 15:15:59 -0200 Subject: ARM: imx_v6_v7_defconfig: Select wireless extensions option Select CONFIG_CFG80211_WEXT so that wireless can work out of the box when using userspace tools such as 'iwconfig'. Generated by manually selecting CONFIG_CFG80211_WEXT and then running: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig , which results in additional cleanup. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/configs/imx_v6_v7_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index cbe7faf55245..eaba3b165d72 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -79,6 +79,7 @@ CONFIG_BT_HCIUART=y CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_LL=y CONFIG_CFG80211=y +CONFIG_CFG80211_WEXT=y CONFIG_MAC80211=y CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y @@ -174,7 +175,6 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_MMA8450=y CONFIG_SERIO_SERPORT=m # CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y @@ -194,11 +194,11 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_STMPE=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_IMX=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y +CONFIG_POWER_SUPPLY=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_SENSORS_IIO_HWMON=y CONFIG_THERMAL=y -- cgit v1.2.3 From b631436ec4af4c71937d533bc5cd27716b542c92 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Fri, 25 Nov 2016 10:13:02 +0100 Subject: ARM: davinci_all_defconfig: enable dumb vga-dac drm bridge This enables the dumb-vga-dac driver by default for davinci boards. The driver is needed for tilcdc support on da850-lcdk board. Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/configs/davinci_all_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 69e2a2379fc8..ddb586a61dc8 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -134,6 +134,7 @@ CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=m CONFIG_VIDEO_TVP514X=m CONFIG_DRM=m CONFIG_DRM_TILCDC=m +CONFIG_DRM_DUMB_VGA_DAC=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DA8XX=y -- cgit v1.2.3 From 1682a9c5694d228041dc7ff59f49427c83920675 Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Fri, 18 Nov 2016 16:00:44 +0100 Subject: ARM: shmobile: defconfig: Enable CONFIG_VIDEO_ADV7604 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The adv7612 is used on Gen2 boards (Lager, Koelsch and Gose) for HDMI input. Enable support for this chip in shmobile_defconfig. Signed-off-by: Niklas Söderlund Signed-off-by: Simon Horman --- arch/arm/configs/shmobile_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 1b0f8ae36fb3..98e9ce66740d 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -145,6 +145,7 @@ CONFIG_VIDEO_RENESAS_JPU=y CONFIG_VIDEO_RENESAS_VSP1=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=y +CONFIG_VIDEO_ADV7604=y CONFIG_VIDEO_ML86V7667=y CONFIG_DRM=y CONFIG_DRM_I2C_ADV7511=y -- cgit v1.2.3 From 77af670a7698bbc4dc9fd8bbd553b33bfb16b68a Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Fri, 18 Nov 2016 16:00:45 +0100 Subject: ARM: shmobile: defconfig: Enable CMA for DMA MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To be able to use VIN with larger frame sizes CMA memory are needed for DMA. If this is not enabled trying to capture large frames can result in errors such as: rcar-vin e6ef0000.video: dma_alloc_coherent of size 8388608 failed A CMA area of 64MB are needed for v4l2-compliance to pass on all formats on the largest possible frame size of 2048x2048. Signed-off-by: Niklas Söderlund Signed-off-by: Simon Horman --- arch/arm/configs/shmobile_defconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 98e9ce66740d..b66e17aec058 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -33,6 +33,7 @@ CONFIG_HAVE_ARM_ARCH_TIMER=y CONFIG_NR_CPUS=8 CONFIG_AEABI=y CONFIG_HIGHMEM=y +CONFIG_CMA=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -58,6 +59,8 @@ CONFIG_CAN_RCAR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y -- cgit v1.2.3 From d234e29dae04b224a63e39bc29938fa77819b3f1 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 6 Dec 2016 14:32:52 +0100 Subject: ARM: shmobile: defconfig: Enable r8a774[35] SoCs Enable recently added r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/configs/shmobile_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index b66e17aec058..760688aa5c79 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -14,6 +14,8 @@ CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y CONFIG_ARCH_R8A73A4=y CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7743=y +CONFIG_ARCH_R8A7745=y CONFIG_ARCH_R8A7778=y CONFIG_ARCH_R8A7779=y CONFIG_ARCH_R8A7790=y -- cgit v1.2.3 From e37278d83e348eb53029452e65892780359b6bea Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 6 Dec 2016 14:32:53 +0100 Subject: ARM: multi_v7_defconfig: Enable r8a774[35] SoCs Enable recently added r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs. Signed-off-by: Simon Horman Acked-by: Geert Uytterhoeven --- arch/arm/configs/multi_v7_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index b01a43851294..f084a0a928b8 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -87,6 +87,8 @@ CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y CONFIG_ARCH_R8A73A4=y CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7743=y +CONFIG_ARCH_R8A7745=y CONFIG_ARCH_R8A7778=y CONFIG_ARCH_R8A7779=y CONFIG_ARCH_R8A7790=y -- cgit v1.2.3 From 4fdf18242408cc0b32b3a1a06510376bf609fa60 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 14 Dec 2016 04:25:54 -0600 Subject: ARM: socfpga_defconfig: update defconfig for SoCFPGA MARVELL_PHY - support for the Marvell PHY that is on most of the devkits EEPROM_AT24 - support for I2C EEPROMs on the devkits GPIO_ALTERA - support for Altera's GPIO driver NAND - support for the Denali NAND controller along with MTD subsystem SPI_DESIGNWARE - support for SPI that is on SoCFPGA SPI_DW_MMIO - support for the memory-mapped io interface for the DW SPI core OF_CONFIGFS - SoCFPGA makes use of DT overlays using configfs, enable it GPIO_ALTERA_A10SR - support for the newly added Altera HWMON driver LEDS - support for the GPIO LEDs on the SoCFPGA devkits RTC - support for the DS1307 RTC JFFS2_FS - support for the JFFS2 filesystem NFS_V4 - supports for v4 NFS FUNCTION_TRACER - supports debug function tracing Signed-off-by: Dinh Nguyen --- arch/arm/configs/socfpga_defconfig | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index 2e1d254e06a2..030264c98eec 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -52,14 +52,20 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_SPI_NOR=y CONFIG_SPI_CADENCE_QUADSPI=y CONFIG_OF_OVERLAY=y +CONFIG_OF_CONFIGFS=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=2 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_NVME=m CONFIG_SRAM=y +CONFIG_EEPROM_AT24=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y @@ -69,6 +75,7 @@ CONFIG_E1000E=m CONFIG_IGB=m CONFIG_IXGBE=m CONFIG_STMMAC_ETH=y +CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y @@ -84,14 +91,22 @@ CONFIG_SERIAL_8250_DW=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_DESIGNWARE=y +CONFIG_SPI_DW_MMIO=y +CONFIG_SPI_SPIDEV=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_ALTERA=y CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_ALTERA_A10SR=y +CONFIG_SENSORS_MAX1619=y CONFIG_PMBUS=y CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_WATCHDOG=y CONFIG_DW_WATCHDOG=y +CONFIG_MFD_ALTERA_A10SR=y CONFIG_MFD_STMPE=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -102,6 +117,14 @@ CONFIG_NOP_USB_XCEIV=y CONFIG_USB_GADGET=y CONFIG_MMC=y CONFIG_MMC_DW=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y CONFIG_DMATEST=m @@ -121,9 +144,10 @@ CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_NTFS_RW=y CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y +CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3_ACL=y @@ -135,5 +159,5 @@ CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set -CONFIG_ENABLE_DEFAULT_TRACERS=y +CONFIG_FUNCTION_TRACER=y CONFIG_DEBUG_USER=y -- cgit v1.2.3 From 8f95a51e6149c604de1f1deed3aeb832f531faa9 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 5 Jan 2017 14:54:00 +0100 Subject: ARM: defconfig: omap2plus: switch LIS3LV02DL driver The OMAP2 plus defconfig lists the LIS3LC02D MISC driver but there is nowadays a proper IIO driver for this accelerometer. Switch the config to the new driver. The IIO software triggers are helpful when using these devices without a dedicated IRQ line, so activate those too. Signed-off-by: Linus Walleij Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 195c98b85568..fff43f79852b 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -137,7 +137,6 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_SENSORS_TSL2550=m CONFIG_SRAM=y CONFIG_EEPROM_AT24=m -CONFIG_SENSORS_LIS3_I2C=m CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y @@ -426,6 +425,9 @@ CONFIG_EXTCON_PALMAS=m CONFIG_EXTCON_USB_GPIO=m CONFIG_TI_EMIF=m CONFIG_IIO=m +CONFIG_IIO_SW_DEVICE=m +CONFIG_IIO_SW_TRIGGER=m +CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_TI_AM335X_ADC=m CONFIG_BMP280=m CONFIG_PWM=y -- cgit v1.2.3 From 94b00aee437d83968b46addd75f28d073a38eac2 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Sat, 7 Jan 2017 12:34:32 -0800 Subject: ARM: configs: keystone: Enable Generic on-chip SRAM driver All the Keystone 2 SoCs have an on-chip RAM called the MultiCore Shared Memory (MSM) RAM managed by the Multicore Shared Memory Controller (MSMC) that provides faster access compared to normal DDR. This patch enables the Generic on-chip SRAM driver that manages this memory in software. Signed-off-by: Suman Anna Signed-off-by: Santosh Shilimkar --- arch/arm/configs/keystone_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 78cd2f197e01..1331f6dc456a 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -126,6 +126,7 @@ CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y +CONFIG_SRAM=y CONFIG_EEPROM_AT24=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -- cgit v1.2.3 From 2e7ee33615f75531ae83607e024babde724e3e94 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Thu, 5 Jan 2017 22:33:47 -0600 Subject: ARM: davinci_all_defconfig: enable pwm-beeper This enables the pwm-beeper module. This is used by the speaker on LEGO MINDSTORMS EV3. Signed-off-by: David Lechner Signed-off-by: Sekhar Nori --- arch/arm/configs/davinci_all_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index ddb586a61dc8..64001f70d40e 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -100,6 +100,7 @@ CONFIG_KEYBOARD_XTKBD=m # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y +CONFIG_INPUT_PWM_BEEPER=m CONFIG_INPUT_DM355EVM=m CONFIG_SERIO_LIBPS2=y # CONFIG_VT_CONSOLE is not set -- cgit v1.2.3 From e297b7343d04afc78329915348d00e1028d8c193 Mon Sep 17 00:00:00 2001 From: Fabrice GASNIER Date: Fri, 2 Dec 2016 14:57:00 +0100 Subject: ARM: configs: stm32: enable ADC driver ADC driver depends on REGULATOR and IIO that are not yet selected. Current hardware boards (like stm32f429i-eval) is using fixed regulators. Signed-off-by: Fabrice Gasnier Signed-off-by: Alexandre TORGUE --- arch/arm/configs/stm32_defconfig | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index 5a72d694662f..8c27c9e11e7a 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -48,6 +48,8 @@ CONFIG_SERIAL_STM32=y CONFIG_SERIAL_STM32_CONSOLE=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_USB_SUPPORT is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -56,6 +58,9 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_DMADEVICES=y CONFIG_STM32_DMA=y +CONFIG_IIO=y +CONFIG_STM32_ADC_CORE=y +CONFIG_STM32_ADC=y # CONFIG_FILE_LOCKING is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set -- cgit v1.2.3 From ff90e93867b2841badd33a419d86be0c08c538ca Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Mon, 2 Jan 2017 14:35:05 -0600 Subject: ARM: multi_v7_defconfig: enable Qualcomm RPMCC This patch enables the Qualcomm RPM based Clock Controller present on A-family boards. Signed-off-by: Andy Gross Acked-by: Bjorn Andersson Signed-off-by: Olof Johansson --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index b01a43851294..4ff677945d1a 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -824,6 +824,7 @@ CONFIG_QCOM_SMSM=y CONFIG_QCOM_WCNSS_CTRL=m CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_COMMON_CLK_QCOM=y +CONFIG_QCOM_CLK_RPM=y CONFIG_CHROME_PLATFORMS=y CONFIG_STAGING_BOARD=y CONFIG_CROS_EC_CHARDEV=m -- cgit v1.2.3 From 3b0c9f5e562a4e76c7c8b83b3102b53daedf2fdd Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 27 Dec 2016 13:05:28 +0100 Subject: ARM: defconfig: replace MPU3050 driver on multi_v7 The multi_v7 config enable the MPU3050 gyro input driver, but there is now a dedicated IIO gyro driver for the same component, which is the right subsystem to handle this. Replace it in the defconfig. As we want the full IIO featureset and as other v7 systems will likely enjoy using IIO for their sensor work (such as the Android-to-IIO userspace HAL), we take this opportunity to turn on the standard sensor HRtimer triggering. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/configs/multi_v7_defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 4ff677945d1a..032569bec6f1 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -296,7 +296,6 @@ CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_INPUT_MISC=y CONFIG_INPUT_MAX77693_HAPTIC=m CONFIG_INPUT_MAX8997_HAPTIC=m -CONFIG_INPUT_MPU3050=y CONFIG_INPUT_AXP20X_PEK=m CONFIG_INPUT_ADXL34X=m CONFIG_SERIO_AMBAKMI=y @@ -848,15 +847,18 @@ CONFIG_MEMORY=y CONFIG_EXTCON=y CONFIG_TI_AEMIF=y CONFIG_IIO=y +CONFIG_IIO_SW_TRIGGER=y CONFIG_AT91_ADC=m CONFIG_AT91_SAMA5D2_ADC=m CONFIG_BERLIN2_ADC=m CONFIG_EXYNOS_ADC=m CONFIG_VF610_ADC=m CONFIG_XILINX_XADC=y +CONFIG_MPU3050_I2C=y CONFIG_CM36651=m CONFIG_AK8975=y CONFIG_RASPBERRYPI_POWER=y +CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_PWM=y CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_HLCDC_PWM=m -- cgit v1.2.3 From 1b1fe1d9732711bb6881422cc21b45c428c26baa Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 27 Dec 2016 13:05:29 +0100 Subject: ARM: defconfig: tegra: switch to MPU3050 IIO driver The Tegra is currently configured to use the old input driver for the MPU-3050. Switch to the new IIO driver. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/configs/tegra_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 844eeef5a509..f0efc854b5a2 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -120,7 +120,6 @@ CONFIG_TOUCHSCREEN_WM97XX=y # CONFIG_TOUCHSCREEN_WM9713 is not set CONFIG_TOUCHSCREEN_STMPE=y CONFIG_INPUT_MISC=y -CONFIG_INPUT_MPU3050=y # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y @@ -263,6 +262,7 @@ CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_MEMORY=y CONFIG_IIO=y +CONFIG_MPU3050_I2C=y CONFIG_AK8975=y CONFIG_PWM=y CONFIG_PWM_TEGRA=y -- cgit v1.2.3 From 94417e5659ebe9c6062dec3261aa3a032547f75b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 27 Dec 2016 13:05:30 +0100 Subject: ARM: defconfig: pxa: cut MPU3050 input driver The PXA defconfig compiles the legacy MPU3050 driver as a module, but the device does not appear in device trees nor board files, so remove this from the defconfig assuming it was a mistake to add it in the first place. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/configs/pxa_defconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index e4314b1227a3..ce4660c79c7a 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -334,7 +334,6 @@ CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_PCAP=m CONFIG_TOUCHSCREEN_ST1232=m CONFIG_INPUT_MISC=y -CONFIG_INPUT_MPU3050=m CONFIG_INPUT_AXP20X_PEK=m CONFIG_INPUT_UINPUT=m CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -- cgit v1.2.3 From 73a40d793cb656f26d674a4348e1f29fb840501d Mon Sep 17 00:00:00 2001 From: David Lechner Date: Mon, 9 Jan 2017 10:11:38 -0600 Subject: ARM: davinci_all_defconfig: enable DA8xx pinconf This enables the DA8xx pinconf driver by default. It is needed by LEGO MINDSTORMS EV3. Signed-off-by: David Lechner Signed-off-by: Sekhar Nori --- arch/arm/configs/davinci_all_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 64001f70d40e..0c6c4c12ecfb 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -115,6 +115,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_DAVINCI=y CONFIG_SPI=y CONFIG_SPI_DAVINCI=m +CONFIG_PINCTRL_DA850_PUPD=m CONFIG_PINCTRL_SINGLE=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PCA953X=y -- cgit v1.2.3 From 322128e90777543c6633f88f2251cf19ae77bbe7 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Mon, 9 Jan 2017 10:11:39 -0600 Subject: ARM: davinci_all_defconfig: Enable PWM modules This enables PWM and the TI ECAP and EHRWPM modules. These are used on LEGO MINDSTORMS EV3. Signed-off-by: David Lechner Signed-off-by: Sekhar Nori --- arch/arm/configs/davinci_all_defconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 0c6c4c12ecfb..f598daab0176 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -201,6 +201,9 @@ CONFIG_TI_EDMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=m CONFIG_DA8XX_DDRCTL=y +CONFIG_PWM=y +CONFIG_PWM_TIECAP=m +CONFIG_PWM_TIEHRPWM=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS_POSIX_ACL=y -- cgit v1.2.3 From 0e81eb77f5f81be9a3fd4a080eba9abfb6e54a3a Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Thu, 5 Jan 2017 15:55:42 +1100 Subject: ARM: configs: Update Aspeed with new drivers We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux, and IPMI BT. Enable these for both g4 and g5 platforms. Signed-off-by: Joel Stanley --- arch/arm/configs/aspeed_g4_defconfig | 38 ++++++++++++++++++++++++++++++++---- arch/arm/configs/aspeed_g5_defconfig | 38 +++++++++++++++++++++++++++++++++++- 2 files changed, 71 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig index ca39c04fec6b..2ea82272c2cb 100644 --- a/arch/arm/configs/aspeed_g4_defconfig +++ b/arch/arm/configs/aspeed_g4_defconfig @@ -29,22 +29,49 @@ CONFIG_DEBUG_RODATA=y CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_SECCOMP=y -# CONFIG_ATAGS is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_KEXEC=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_INET=y +CONFIG_NET_NCSI=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_AMAZON is not set +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_EZCHIP is not set +CONFIG_FTGMAC100=y +# CONFIG_NET_VENDOR_HISILICON is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETRONOME is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_RENESAS is not set +# CONFIG_NET_VENDOR_ROCKER is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SOLARFLARE is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_CONSOLE=y @@ -53,7 +80,10 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_ASPEED_BT_IPMI_BMC=y # CONFIG_HW_RANDOM is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_ASPEED=y # CONFIG_USB_SUPPORT is not set # CONFIG_IOMMU_SUPPORT is not set CONFIG_FIRMWARE_MEMMAP=y diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 4f366b0370e9..ae4295ec5c3e 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -27,6 +27,7 @@ CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_ASPEED=y CONFIG_MACH_ASPEED_G5=y CONFIG_DEBUG_RODATA=y +CONFIG_VMSPLIT_2G=y CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_SECCOMP=y @@ -37,15 +38,46 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_KEXEC=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NET_NCSI=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_AMAZON is not set +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_EZCHIP is not set +CONFIG_FTGMAC100=y +# CONFIG_NET_VENDOR_HISILICON is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETRONOME is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_RENESAS is not set +# CONFIG_NET_VENDOR_ROCKER is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SOLARFLARE is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_CONSOLE=y @@ -54,7 +86,10 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_ASPEED_BT_IPMI_BMC=y # CONFIG_HW_RANDOM is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_ASPEED=y # CONFIG_USB_SUPPORT is not set # CONFIG_IOMMU_SUPPORT is not set CONFIG_FIRMWARE_MEMMAP=y @@ -82,6 +117,7 @@ CONFIG_DEBUG_UART_PHYS=0x1e784000 CONFIG_DEBUG_UART_VIRT=0xe8784000 CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_SET_MODULE_RONX=y +CONFIG_CRYPTO_ECHAINIV=y # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set # CONFIG_XZ_DEC_IA64 is not set -- cgit v1.2.3 From f46b1d47d4a14ddf0f935283c7c0bd0d446c54b0 Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Tue, 10 Jan 2017 14:18:34 +0100 Subject: ARM: sama5_defconfig: add support for the Axentia TSE-850 board The Axentia TSE-850 is a SAMA5D3-based device designed to generate FM subcarrier signals. Signed-off-by: Peter Rosin Acked-by: Nicolas Ferre Signed-off-by: Alexandre Belloni --- arch/arm/configs/sama5_defconfig | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index aca8625b6fc9..777c9e986425 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -131,7 +131,7 @@ CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_ACT8945A=y CONFIG_POWER_RESET=y -# CONFIG_HWMON is not set +CONFIG_SENSORS_JC42=m CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SAMA5D4_WATCHDOG=y @@ -142,6 +142,7 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_ACT8865=y CONFIG_REGULATOR_ACT8945A=y +CONFIG_REGULATOR_PWM=m CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y @@ -164,6 +165,7 @@ CONFIG_SND_ATMEL_SOC=y CONFIG_SND_ATMEL_SOC_WM8904=y # CONFIG_HID_GENERIC is not set CONFIG_SND_ATMEL_SOC_PDMIC=y +CONFIG_SND_ATMEL_SOC_TSE850_PCM5142=m CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_EHCI_HCD=y @@ -199,6 +201,9 @@ CONFIG_AT_XDMAC=y CONFIG_IIO=y CONFIG_AT91_ADC=y CONFIG_AT91_SAMA5D2_ADC=y +CONFIG_ENVELOPE_DETECTOR=m +CONFIG_DPOT_DAC=m +CONFIG_MCP4531=m CONFIG_PWM=y CONFIG_PWM_ATMEL=y CONFIG_PWM_ATMEL_HLCDC_PWM=y -- cgit v1.2.3 From 2ec8258fe4d039ce312a1e59ba4b8419ad96d808 Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Thu, 17 Nov 2016 17:20:26 +0200 Subject: ARM: qcom_defconfig: Enable RPM/RPM-SMD clocks Enable support for clocks, controlled by the RPM processor on Qualcomm platforms. Signed-off-by: Georgi Djakov Signed-off-by: Andy Gross --- arch/arm/configs/qcom_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 8c3a0108a231..c73299b51f7b 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -157,6 +157,8 @@ CONFIG_DMADEVICES=y CONFIG_QCOM_BAM_DMA=y CONFIG_STAGING=y CONFIG_COMMON_CLK_QCOM=y +CONFIG_QCOM_CLK_RPM=y +CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_APQ_MMCC_8084=y CONFIG_IPQ_LCC_806X=y CONFIG_MSM_GCC_8660=y -- cgit v1.2.3 From 55729edd767091af8728ee890b60fd2e740666af Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 4 Jan 2017 13:35:30 +0000 Subject: ARM: qcom_defconfig: add usb related configs Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/configs/qcom_defconfig | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index c73299b51f7b..1712201bd8cd 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -137,10 +137,16 @@ CONFIG_SND_SOC=y CONFIG_HID_BATTERY_STRENGTH=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_OTG=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=y CONFIG_USB_ACM=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_SERIAL=y +CONFIG_USB_MSM_OTG=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_VBUS_DRAW=500 -- cgit v1.2.3 From 15ee5c8c2af8daf4aef61a2e5b896accf16e1452 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 4 Jan 2017 13:35:31 +0000 Subject: ARM: qcom_defconfig: add pcie and atl1c ethernet configs IFC6410 board has PCIE based ATL1C ethernet controller, so enable related configs. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/configs/qcom_defconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 1712201bd8cd..8e76fbb86400 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -24,6 +24,9 @@ CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y CONFIG_ARCH_MDM9615=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCIE_QCOM=y CONFIG_SMP=y CONFIG_HAVE_ARM_ARCH_TIMER=y CONFIG_PREEMPT=y @@ -70,6 +73,7 @@ CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_ATL1C=y CONFIG_KS8851=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_GPIO=y -- cgit v1.2.3 From 05eeee7dee716ea3a1da9d0ff23e6ea98e25316c Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 4 Jan 2017 13:35:32 +0000 Subject: ARM: qcom_defconfig: add ahci configs This patch enables configs required to get SATA functionality working on IFC6410 board. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/configs/qcom_defconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 8e76fbb86400..af6ff1e065ff 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -71,6 +71,9 @@ CONFIG_CHR_DEV_SCH=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_ATL1C=y -- cgit v1.2.3 From a0f9419c7f213e80eba0e444d270b7d0bf600b4a Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 4 Jan 2017 13:35:33 +0000 Subject: ARM: qcom_defconfig: enable thermal sensors This patch enables thermal sensors and QFPROM support for qcom platforms. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/configs/qcom_defconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index af6ff1e065ff..fc41977f7e97 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -125,6 +125,7 @@ CONFIG_CHARGER_QCOM_SMBB=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y CONFIG_THERMAL=y +CONFIG_QCOM_TSENS=y CONFIG_MFD_PM8XXX=y CONFIG_MFD_QCOM_RPM=y CONFIG_MFD_SPMI_PMIC=y @@ -188,6 +189,8 @@ CONFIG_QCOM_SMD=y CONFIG_QCOM_SMD_RPM=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y +CONFIG_NVMEM=y +CONFIG_QCOM_QFPROM=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y -- cgit v1.2.3 From e96165a30f0dc2f02f9578a02c8feb9fbb428802 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 10 Jan 2017 10:55:21 +0100 Subject: ARM: defconfig: qcom: add APQ8060 DragonBoard devices This default-enables the devices found on the APQ8060 DragonBoard in the qcom_defconfig: - EBI2 bus - SMSC911x ethernet - LEDs class and PM8058 LEDs driver, trigger and heartbeat trigger (so we get heartbeat on the board by default) - IIO framework, including the HRTimer trigger, KXSD9 accelerometer, MPU3050 gyroscope, AK8975 magnetometer and BMP085 pressure sensor Signed-off-by: Linus Walleij Signed-off-by: Andy Gross --- arch/arm/configs/qcom_defconfig | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index fc41977f7e97..4ffdd607205d 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -58,6 +58,7 @@ CONFIG_CFG80211=y CONFIG_RFKILL=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_QCOM_EBI2=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y @@ -78,6 +79,7 @@ CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_ATL1C=y CONFIG_KS8851=y +CONFIG_SMSC911X=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_GPIO=y CONFIG_SLIP=y @@ -165,6 +167,12 @@ CONFIG_MMC_QCOM_DML=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_MSM=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PM8058=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PM8XXX=y CONFIG_DMADEVICES=y @@ -187,6 +195,14 @@ CONFIG_QCOM_PM=y CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD=y CONFIG_QCOM_SMD_RPM=y +CONFIG_IIO=y +CONFIG_IIO_BUFFER_CB=y +CONFIG_IIO_SW_TRIGGER=y +CONFIG_KXSD9=y +CONFIG_MPU3050_I2C=y +CONFIG_AK8975=y +CONFIG_IIO_HRTIMER_TRIGGER=y +CONFIG_BMP280=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_NVMEM=y -- cgit v1.2.3 From 770e96f30cc2e4a363dd8fae2e9028173b1f2af1 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Thu, 5 Jan 2017 14:43:00 +0100 Subject: ARM: configs: stm32: Add RTC support in STM32 defconfig This patch adds STM32 RTC support in stm32_defconfig file. Signed-off-by: Amelie Delaunay Signed-off-by: Alexandre TORGUE --- arch/arm/configs/stm32_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig index 8c27c9e11e7a..a9d8e3c9b487 100644 --- a/arch/arm/configs/stm32_defconfig +++ b/arch/arm/configs/stm32_defconfig @@ -56,6 +56,8 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_STM32=y CONFIG_DMADEVICES=y CONFIG_STM32_DMA=y CONFIG_IIO=y -- cgit v1.2.3 From a2735c3067e7c25c46433c1d73b97d4d4e512de8 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 19 Jan 2017 09:36:08 -0800 Subject: ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER The Keystone 2 family of SoCs will use various Reset Controller drivers for managing the resets of remote processor devices like DSPs on the SoC, so select the ARCH_HAS_RESET_CONTROLLER option by default to enable the Reset framework. Signed-off-by: Suman Anna Signed-off-by: Nishanth Menon Signed-off-by: Santosh Shilimkar --- arch/arm/mach-keystone/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index 24bd64dabdfc..554357035f30 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -4,6 +4,7 @@ config ARCH_KEYSTONE select ARM_GIC select HAVE_ARM_ARCH_TIMER select KEYSTONE_TIMER + select ARCH_HAS_RESET_CONTROLLER select ARM_ERRATA_798181 if SMP select COMMON_CLK_KEYSTONE select ARCH_SUPPORTS_BIG_ENDIAN -- cgit v1.2.3 From 685db57ace04411387b33e607d6abde9763819e7 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Fri, 13 Jan 2017 14:00:12 -0600 Subject: ARM: davinci_all_defconfig: enable iio This enables the iio subsystem. This will be used by LEGO MINDSTORMS EV3, which has an ADS7957 chip. Signed-off-by: David Lechner Signed-off-by: Sekhar Nori --- arch/arm/configs/davinci_all_defconfig | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index f598daab0176..8cc040936ae7 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -201,6 +201,15 @@ CONFIG_TI_EDMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=m CONFIG_DA8XX_DDRCTL=y +CONFIG_IIO=m +CONFIG_IIO_BUFFER=y +CONFIG_IIO_BUFFER_CB=m +CONFIG_IIO_KFIFO_BUF=m +CONFIG_IIO_TRIGGER=y +CONFIG_IIO_SW_DEVICE=m +CONFIG_IIO_SW_TRIGGER=m +CONFIG_IIO_HRTIMER_TRIGGER=m +CONFIG_IIO_SYSFS_TRIGGER=m CONFIG_PWM=y CONFIG_PWM_TIECAP=m CONFIG_PWM_TIEHRPWM=m -- cgit v1.2.3 From 4cd6a59f5c1a9b0cca0da09fbba42b9450ffc899 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 20 Jan 2017 12:13:19 -0800 Subject: ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 We have more than four uarts on some SoCs and that can cause noise with errors while booting. Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index fff43f79852b..bac35f3b0009 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -212,6 +212,7 @@ CONFIG_SERIO=m CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y -- cgit v1.2.3 From 5aaac4278afa6ef8a42dc2c51f3e1a1a20d5bd97 Mon Sep 17 00:00:00 2001 From: afzal mohammed Date: Tue, 24 Jan 2017 03:34:06 +0530 Subject: ARM: vf610m4: defconfig: enable EXT4 filesystem Enable EXT4_FS to have rootfs in EXT[2-4]. Other changes are result of savedefconfig keeping minimal config (even without enabling EXT4_FS, these would be present). Signed-off-by: afzal mohammed Signed-off-by: Shawn Guo --- arch/arm/configs/vf610m4_defconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig index aeb2482c492e..b7ecb83a95b6 100644 --- a/arch/arm/configs/vf610m4_defconfig +++ b/arch/arm/configs/vf610m4_defconfig @@ -7,7 +7,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_MMU is not set -CONFIG_ARM_SINGLE_ARMV7M=y CONFIG_ARCH_MXC=y CONFIG_SOC_VF610=y CONFIG_SET_MEM_PARAM=y @@ -38,5 +37,5 @@ CONFIG_SERIAL_FSL_LPUART_CONSOLE=y CONFIG_MFD_SYSCON=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set +CONFIG_EXT4_FS=y # CONFIG_MISC_FILESYSTEMS is not set -# CONFIG_FTRACE is not set -- cgit v1.2.3 From e5e6cf4b8179cbf54e620bba76a6da2e3ca7ed43 Mon Sep 17 00:00:00 2001 From: Teresa Remmet Date: Tue, 24 Jan 2017 11:09:35 +0100 Subject: ARM: omap2plus_defconfig: Enable support for micrell phys The phyCORE-AM335x SoM with PCM-953 carrierboard has a KSZ9021 phy mounted. To add support for this we need to enable the micrell phy driver in the config. Signed-off-by: Teresa Remmet Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index bac35f3b0009..59f39aeff017 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -167,6 +167,7 @@ CONFIG_TI_CPTS=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_AT803X_PHY=y +CONFIG_MICREL_PHY=y CONFIG_SMSC_PHY=y CONFIG_USB_USBNET=m CONFIG_USB_NET_SMSC75XX=m -- cgit v1.2.3 From ac57feb25833a6f3832a436d28808ffc16c672b3 Mon Sep 17 00:00:00 2001 From: Teresa Remmet Date: Tue, 24 Jan 2017 11:09:36 +0100 Subject: ARM: omap2plus_defconfig: Enable support for RTC M41T80 The phyCORE-AM335x SoM has a RV4162 RTC populated which is supported by the M41T80 driver. Enabled it so make the RTC support on the SoM available. Signed-off-by: Teresa Remmet Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 59f39aeff017..f2462a6bdba6 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -414,6 +414,7 @@ CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=m CONFIG_RTC_DRV_PALMAS=m -- cgit v1.2.3 From e66e937121321e6a7aa692a87de888aae7bc9d23 Mon Sep 17 00:00:00 2001 From: Marc Gonzalez Date: Wed, 25 Jan 2017 18:43:23 +0100 Subject: ARM: Import tango4_defconfig Import a minimal defconfig for tango4 boards. Signed-off-by: Marc Gonzalez Signed-off-by: Olof Johansson --- arch/arm/configs/tango4_defconfig | 94 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 arch/arm/configs/tango4_defconfig (limited to 'arch/arm') diff --git a/arch/arm/configs/tango4_defconfig b/arch/arm/configs/tango4_defconfig new file mode 100644 index 000000000000..68725d4eae45 --- /dev/null +++ b/arch/arm/configs/tango4_defconfig @@ -0,0 +1,94 @@ +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_ARCH_TANGO=y +# CONFIG_ARM_ERRATA_643719 is not set +CONFIG_SMP=y +CONFIG_PREEMPT=y +CONFIG_HZ_300=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +# CONFIG_ATAGS is not set +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPUFREQ_DT=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_TESTS=m +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_TANGO=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +CONFIG_NET_VENDOR_AURORA=y +CONFIG_AURORA_NB8800=y +CONFIG_AT803X_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_RT288X=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_XLR=y +CONFIG_GPIOLIB=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y +CONFIG_TANGO_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_TANGOX_WATCHDOG=y +CONFIG_FB=y +# CONFIG_HID is not set +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ARASAN=y +CONFIG_DMADEVICES=y +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=m +CONFIG_VFAT_FS=m +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V2 is not set +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_UTF8=m +CONFIG_PRINTK_TIME=y +# CONFIG_CRYPTO_ECHAINIV is not set -- cgit v1.2.3 From 484290350c8d6ec119d255304ff32d7e255ed208 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 30 Jan 2017 11:01:59 +0100 Subject: ARM: davinci_all_defconfig: enable SATA modules Add the da850-ahci driver to davinci defconfig. Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/configs/davinci_all_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 8cc040936ae7..c8663eac9b1b 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -78,6 +78,8 @@ CONFIG_IDE=m CONFIG_BLK_DEV_PALMCHIP_BK3710=m CONFIG_SCSI=m CONFIG_BLK_DEV_SD=m +CONFIG_ATA=m +CONFIG_AHCI_DA850=m CONFIG_NETDEVICES=y CONFIG_NETCONSOLE=y CONFIG_TUN=m -- cgit v1.2.3 From 132509843461fa06d9b7b8ba17a1309736ceefac Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 15 Feb 2017 18:30:12 +0000 Subject: ARM: multi_v7_defconfig: enable some newly added crypto modules Enable the new accelerated CRC32(C), CRC-T10DIF and ChaCha20 drivers as modules for multi_v7_defconfig builds. Signed-off-by: Ard Biesheuvel Signed-off-by: Arnd Bergmann --- arch/arm/configs/multi_v7_defconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 188b6c6258a5..32c5893f3903 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -941,6 +941,9 @@ CONFIG_CRYPTO_SHA512_ARM=m CONFIG_CRYPTO_AES_ARM=m CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRYPTO_AES_ARM_CE=m +CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_CRYPTO_CRC32_ARM_CE=m +CONFIG_CRYPTO_CRCT10DIF_ARM_CE=m CONFIG_CRYPTO_GHASH_ARM_CE=m CONFIG_CRYPTO_DEV_ATMEL_AES=m CONFIG_CRYPTO_DEV_ATMEL_TDES=m -- cgit v1.2.3 From ddf5cf02b981e32aa5896cfd66fc191b9a58ed2e Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Thu, 9 Feb 2017 12:52:50 -0800 Subject: ARM: multi_v7_defconfig: enable pstore configs It's useful to get testing on these features on various boards (e.g., on KernelCI), and (when they're working) the ramoops feature is extremely helpful for debugging live systems. Signed-off-by: Brian Norris Signed-off-by: Arnd Bergmann --- arch/arm/configs/multi_v7_defconfig | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 32c5893f3903..69bee6c5b3a3 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -911,6 +911,10 @@ CONFIG_TMPFS=y CONFIG_SQUASHFS=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y +CONFIG_PSTORE=y +CONFIG_PSTORE_CONSOLE=y +CONFIG_PSTORE_PMSG=y +CONFIG_PSTORE_RAM=y CONFIG_NFS_FS=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y -- cgit v1.2.3