From 4ab88516b097ac8c23e00e7c3a26fbcd16feeefd Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Mon, 10 Dec 2018 11:14:29 +0100 Subject: arm64: dts: allwinner: a64: Fix the video engine compatible When introducing the video-codec node for the video engine, the compatible for the H5 was used instead of the compatible for the A64. Use the right compatible instead. Fixes: d60ce24740d2 ("arm64: dts: allwinner: a64: Add Video Engine node") Signed-off-by: Paul Kocialkowski Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 837a03dee875..2abb335145a6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -390,7 +390,7 @@ }; video-codec@1c0e000 { - compatible = "allwinner,sun50i-h5-video-engine"; + compatible = "allwinner,sun50i-a64-video-engine"; reg = <0x01c0e000 0x1000>; clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, <&ccu CLK_DRAM_VE>; -- cgit v1.2.3 From b1360dcfdaa1d55952e5ec8dd9d99f88965d7ac9 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Wed, 9 Jan 2019 19:16:04 +0100 Subject: arm64: dts: allwinner: a64: Fix USB OTG regulator Currently, AXP803 driver assumes that reg_drivevbus is input which is wrong. Unfortunate consequence of that is that none of the USB ports work on the board, even USB HOST port, because USB PHY driver probing fails due to missing regulator. Fix that by adding "x-powers,drive-vbus-en" property to AXP803 node. Fixes: 14ff5d8f9151 ("arm64: dts: allwinner: a64: Orange Pi Win: Enable USB OTG socket") Cc: stable@vger.kernel.org Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index b0c64f75792c..8974b5a1d3b1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -188,6 +188,7 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; }; -- cgit v1.2.3 From f29200c8b1e267b109242677ae7f2146c7682d14 Mon Sep 17 00:00:00 2001 From: Loys Ollivier Date: Mon, 14 Jan 2019 15:44:21 +0100 Subject: arm64: dts: meson: Fix mmc cd-gpios polarity Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") changed the behavior of "cd-inverted" to follow the device tree bindings specification: According to SDHCI standard, CD lines are specified as "active low". Using the "cd-inverted" property means that the CD line is "active high". Fix the SD card description for meson by setting the cd-gpios as "active low", according to the boards specifications, and dropping the "cd-inverted" property. Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Loys Ollivier Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 3 +-- arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 3 +-- 14 files changed, 14 insertions(+), 28 deletions(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index e14e0ce7e89f..016641a41694 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -187,8 +187,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 8cd50b75171d..ade2ee09ae96 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -305,8 +305,7 @@ max-frequency = <200000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddio_ao3v3>; vqmmc-supply = <&vddio_tf>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 4cf7f6e80c6a..25105ac96d55 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -238,8 +238,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 2e1cd5e3a246..1cc9dc68ef00 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -258,8 +258,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&tflash_vdd>; vqmmc-supply = <&tf_io>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index ce862266b9aa..0be0f2a5d2fe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -196,8 +196,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 93a4acf2c46c..ad4d50bd9d77 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -154,8 +154,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi index ec09bb5792b7..2d2db783c44c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi @@ -211,8 +211,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vcc_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts index f1c410e2da2b..796baea7a0bf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -131,8 +131,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index db293440e4ca..255cede7b447 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -238,8 +238,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; vqmmc-supply = <&vcc_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 6739697be1de..9cbdb85fb591 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -183,8 +183,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_card>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index a1b31013ab6e..bc811a2faf42 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -137,8 +137,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 3c3a667a8df8..3f086ed7de05 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -356,8 +356,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index f7a1cffab4a8..8acfd40090d2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -147,8 +147,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 7212dc4531e4..7fa20a8ede17 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -170,8 +170,7 @@ max-frequency = <100000000>; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; -- cgit v1.2.3 From 2bb7b675248c3ad11ada0ce3d0f6d480ec8cc87b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 10 Jan 2019 14:39:13 +0100 Subject: arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2 SCIF2 on RZ/G2M can be used with both DMAC1 and DMAC2. Fixes: 3a3933a4fa36430a ("arm64: dts: renesas: r8a774a1: Add SCIF and HSCIF nodes") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 20745a8528c5..719ed9d9067d 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -1011,6 +1011,9 @@ <&cpg CPG_CORE R8A774A1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; -- cgit v1.2.3 From 97f26702bc95b5c3a72671d5c6675e4d6ee0a2f4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 10 Jan 2019 14:39:15 +0100 Subject: arm64: dts: renesas: r8a7796: Enable DMA for SCIF2 SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2. Fixes: dbcae5ea4bd27409 ("arm64: dts: r8a7796: Enable SCIF DMA") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index afedbf5728ec..0648d12778ed 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1262,6 +1262,9 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; -- cgit v1.2.3 From 05c8478abd485507c25aa565afab604af8d8fe46 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 10 Jan 2019 14:39:16 +0100 Subject: arm64: dts: renesas: r8a77965: Enable DMA for SCIF2 SCIF2 on R-Car M3-N can be used with both DMAC1 and DMAC2. Fixes: 0ea5b2fd38db56aa ("arm64: dts: renesas: r8a77965: Add SCIF device nodes") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a77965.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 6dc9b1fef830..4b3730f640ef 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -1068,6 +1068,9 @@ <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; -- cgit v1.2.3 From 2a81efb0de0e33f2d2c83154af0bd3ce389b3269 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 10 Dec 2018 13:56:33 +0000 Subject: arm64: dts: add msm8996 compatible to gicv3 Add compatible to gicv3 node to enable quirk required to restrict writing to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor. With this quirk MSM8996 can at least boot out of mainline, which can help community to work with boards based on MSM8996. Without this patch Qualcomm DB820c board reboots on mainline. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 99b7495455a6..838e32cc14c9 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -404,7 +404,7 @@ }; intc: interrupt-controller@9bc0000 { - compatible = "arm,gic-v3"; + compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; #interrupt-cells = <3>; interrupt-controller; #redistributor-regions = <1>; -- cgit v1.2.3