From bed9d1bb4ed8c9bdaca77d31a2562c3a9dae43a7 Mon Sep 17 00:00:00 2001 From: Tarun Kanti DebBarma Date: Wed, 4 Jul 2012 05:00:48 -0600 Subject: ARM: OMAP2+: hwmod: add omap_hwmod_get_main_clk() API Add an API to get main clock name associated with a given @oh. This will avoid the need to construct fclk names during early initialization in order to get fclk handle using clk_get(). Signed-off-by: Tarun Kanti DebBarma Cc: Benoit Cousson Cc: Paul Walmsley Cc: Tony Lindgren Cc: Kevin Hilman Cc: Rajendra Nayak Cc: Santosh Shilimkar Acked-by: Benoit Cousson Signed-off-by: Paul Walmsley --- arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/plat-omap/include') diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index c835b7194ff5..da22acd0ce7a 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -629,6 +629,8 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx); +const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); + /* * Chip variant-specific hwmod init routines - XXX should be converted * to use initcalls once the initial boot ordering is straightened out -- cgit v1.2.3 From 6668546f3bb4cc0dde75ac1ef1d436b67e4ef638 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Wed, 4 Jul 2012 05:09:21 -0600 Subject: ARM: OMAP2+: hwmod code: add support to set dmadisable in hwmod framework The DMADISABLE bit is a semi-automatic bit present in sysconfig register of some modules. When the DMA must perform read/write accesses, the DMADISABLE bit is cleared by the hardware. But when the DMA must stop for power management, software must set the DMADISABLE bit back to 1. In cases where the ROMCODE/BOOTLOADER uses dma, the hardware clears the DMADISABLE bit (but the romcode/bootloader might not set it back to 1). In order for the kernel to start in a clean state, it is necessary for the kernel to set DMADISABLE bit back to 1 (irrespective of whether it's been set to 1 in romcode or bootloader). During _reset of the (hwmod)device, the DMADISABLE bit is set so that it does not prevent idling of the system. (NOTE: having DMADISABLE to 0, prevents the system to idle) DMADISABLE bit is present in usbotgss module of omap5. Cc: Benoit Cousson Cc: Kevin Hilman Cc: Paul Walmsley Signed-off-by: Kishon Vijay Abraham I [paul@pwsan.com: updated to apply; fixed checkpatch warnings] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 61 +++++++++++++++++++++++++--- arch/arm/mach-omap2/omap_hwmod_common_data.c | 1 + arch/arm/plat-omap/include/plat/omap_hwmod.h | 5 +++ 3 files changed, 62 insertions(+), 5 deletions(-) (limited to 'arch/arm/plat-omap/include') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index a89214ee4694..98cde62c0cac 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -387,6 +387,49 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) return 0; } +/** + * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v + * @oh: struct omap_hwmod * + * + * The DMADISABLE bit is a semi-automatic bit present in sysconfig register + * of some modules. When the DMA must perform read/write accesses, the + * DMADISABLE bit is cleared by the hardware. But when the DMA must stop + * for power management, software must set the DMADISABLE bit back to 1. + * + * Set the DMADISABLE bit in @v for hwmod @oh. Returns -EINVAL upon + * error or 0 upon success. + */ +static int _set_dmadisable(struct omap_hwmod *oh) +{ + u32 v; + u32 dmadisable_mask; + + if (!oh->class->sysc || + !(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE)) + return -EINVAL; + + if (!oh->class->sysc->sysc_fields) { + WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name); + return -EINVAL; + } + + /* clocks must be on for this operation */ + if (oh->_state != _HWMOD_STATE_ENABLED) { + pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name); + return -EINVAL; + } + + pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name); + + v = oh->_sysc_cache; + dmadisable_mask = + (0x1 << oh->class->sysc->sysc_fields->dmadisable_shift); + v |= dmadisable_mask; + _write_sysconfig(v, oh); + + return 0; +} + /** * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v * @oh: struct omap_hwmod * @@ -1698,11 +1741,17 @@ dis_opt_clks: * therefore have no OCP header registers to access. Others (like the * IVA) have idiosyncratic reset sequences. So for these relatively * rare cases, custom reset code can be supplied in the struct - * omap_hwmod_class .reset function pointer. Passes along the return - * value from either _ocp_softreset() or the custom reset function - - * these must return -EINVAL if the hwmod cannot be reset this way or - * if the hwmod is in the wrong state, -ETIMEDOUT if the module did - * not reset in time, or 0 upon success. + * omap_hwmod_class .reset function pointer. + * + * _set_dmadisable() is called to set the DMADISABLE bit so that it + * does not prevent idling of the system. This is necessary for cases + * where ROMCODE/BOOTLOADER uses dma and transfers control to the + * kernel without disabling dma. + * + * Passes along the return value from either _ocp_softreset() or the + * custom reset function - these must return -EINVAL if the hwmod + * cannot be reset this way or if the hwmod is in the wrong state, + * -ETIMEDOUT if the module did not reset in time, or 0 upon success. */ static int _reset(struct omap_hwmod *oh) { @@ -1724,6 +1773,8 @@ static int _reset(struct omap_hwmod *oh) } } + _set_dmadisable(oh); + /* * OCP_SYSCONFIG bits need to be reprogrammed after a * softreset. The _enable() function should be split to avoid diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index 51e5418899fb..aff613852911 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -47,6 +47,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = { .midle_shift = SYSC_TYPE2_MIDLEMODE_SHIFT, .sidle_shift = SYSC_TYPE2_SIDLEMODE_SHIFT, .srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT, + .dmadisable_shift = SYSC_TYPE2_DMADISABLE_SHIFT, }; struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = { diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index da22acd0ce7a..27455ed0a2ab 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -69,6 +69,8 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; #define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT) #define SYSC_TYPE2_MIDLEMODE_SHIFT 4 #define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT) +#define SYSC_TYPE2_DMADISABLE_SHIFT 16 +#define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT) /* OCP SYSSTATUS bit shifts/masks */ #define SYSS_RESETDONE_SHIFT 0 @@ -283,6 +285,7 @@ struct omap_hwmod_ocp_if { #define SYSS_HAS_RESET_STATUS (1 << 7) #define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */ #define SYSC_HAS_RESET_STATUS (1 << 9) +#define SYSC_HAS_DMADISABLE (1 << 10) /* omap_hwmod_sysconfig.clockact flags */ #define CLOCKACT_TEST_BOTH 0x0 @@ -298,6 +301,7 @@ struct omap_hwmod_ocp_if { * @enwkup_shift: Offset of the enawakeup bit * @srst_shift: Offset of the softreset bit * @autoidle_shift: Offset of the autoidle bit + * @dmadisable_shift: Offset of the dmadisable bit */ struct omap_hwmod_sysc_fields { u8 midle_shift; @@ -306,6 +310,7 @@ struct omap_hwmod_sysc_fields { u8 enwkup_shift; u8 srst_shift; u8 autoidle_shift; + u8 dmadisable_shift; }; /** -- cgit v1.2.3