From 22b1908610dd7ff68471cd4fbd383dbdfe5e0ecd Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 29 Jun 2006 15:09:57 +0100 Subject: [ARM] nommu: provide a way for correct control register value selection Most MMU-based CPUs have a restriction on the setting of the data cache enable and mmu enable bits in the control register, whereby if the data cache is enabled, the MMU must also be enabled. Enabling the data cache without the MMU is an invalid combination. However, there are CPUs where the data cache can be enabled without the MMU. In order to allow these CPUs to take advantage of that, provide a method whereby each proc-*.S file defines the control regsiter value for use with nommu (with the MMU disabled.) Later on, when we add support for enabling the MMU on these devices, we can adjust the "crval" macro to also enable the data cache for nommu. Signed-off-by: Russell King --- arch/arm/mm/proc-arm922.S | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'arch/arm/mm/proc-arm922.S') diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 33dae4929f09..0d237693d0a4 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -395,11 +395,11 @@ __arm922_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 #endif + adr r5, arm922_crval + ldmia r5, {r5, r6} mrc p15, 0, r0, c1, c0 @ get control register v4 - ldr r5, arm922_cr1_clear bic r0, r0, r5 - ldr r5, arm922_cr1_set - orr r0, r0, r5 + orr r0, r0, r6 mov pc, lr .size __arm922_setup, . - __arm922_setup @@ -409,12 +409,9 @@ __arm922_setup: * ..11 0001 ..11 0101 * */ - .type arm922_cr1_clear, #object - .type arm922_cr1_set, #object -arm922_cr1_clear: - .word 0x3f3f -arm922_cr1_set: - .word 0x3135 + .type arm922_crval, #object +arm922_crval: + crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130 __INITDATA -- cgit v1.2.3