From 326474067f75f6c39277acbb61c45ad924f03f30 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 29 Mar 2011 17:34:23 +0200 Subject: mach-ux500: update the DB8500 register file Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/db8500-regs.h | 37 +++++++++++++++++++++----- 1 file changed, 30 insertions(+), 7 deletions(-) (limited to 'arch/arm/mach-ux500') diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 16647b255378..049997109cf9 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -15,8 +15,13 @@ #define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE) #define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE) #define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE) -/* Use bank 4 for DMA LCPA */ -#define U8500_DMA_LCPA_BASE U8500_ESRAM_BANK4 +/* + * on V1 DMA uses 4KB for logical parameters position is right after the 64KB + * reserved for security + */ +#define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000 + +#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET) #define U8500_DMA_LCPA_BASE_ED (U8500_ESRAM_BANK4 + 0x4000) #define U8500_PER3_BASE 0x80000000 @@ -27,9 +32,12 @@ #define U8500_B2R2_BASE 0x80130000 #define U8500_HSEM_BASE 0x80140000 #define U8500_PER4_BASE 0x80150000 +#define U8500_TPIU_BASE 0x80190000 #define U8500_ICN_BASE 0x81000000 #define U8500_BOOT_ROM_BASE 0x90000000 +/* ASIC ID is at 0xbf4 offset within this region */ +#define U8500_ASIC_ID_BASE 0x9001D000 #define U8500_PER6_BASE 0xa03c0000 #define U8500_PER5_BASE 0xa03e0000 @@ -70,13 +78,15 @@ /* per6 base addresses */ #define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) -#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) -#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_HASH0_BASE (U8500_PER6_BASE + 0x1000) +#define U8500_HASH1_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_PKA_BASE (U8500_PER6_BASE + 0x4000) +#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x5100) #define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */ #define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */ #define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */ -#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) -#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) +#define U8500_CRYP0_BASE (U8500_PER6_BASE + 0xa000) +#define U8500_CRYP1_BASE (U8500_PER6_BASE + 0xb000) #define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) /* per5 base addresses */ @@ -93,7 +103,8 @@ #define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) #define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) +#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) /* per3 base addresses */ #define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) @@ -124,6 +135,7 @@ #define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) #define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) #define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) +#define U8500_MSP3_BASE (U8500_PER1_BASE + 0x5000) #define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) #define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) #define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) @@ -143,4 +155,15 @@ #define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80) #define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE +#define U8500_MCDE_SIZE 0x1000 +#define U8500_DSI_LINK_SIZE 0x1000 +#define U8500_DSI_LINK1_BASE (U8500_MCDE_BASE + U8500_MCDE_SIZE) +#define U8500_DSI_LINK2_BASE (U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE) +#define U8500_DSI_LINK3_BASE (U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE) +#define U8500_DSI_LINK_COUNT 0x3 + +/* Modem and APE physical addresses */ +#define U8500_MODEM_BASE 0xe000000 +#define U8500_APE_BASE 0x6000000 + #endif -- cgit v1.2.3 From b25962599bcc31cf685127c682931e07167f3d1a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 29 Mar 2011 17:37:04 +0200 Subject: mach-ux500: update the DB5500 register file Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/db5500-regs.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-ux500') diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h index bd88c1e74060..6ad983294103 100644 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -17,6 +17,8 @@ #define U5500_GIC_DIST_BASE 0xA0411000 #define U5500_GIC_CPU_BASE 0xA0410100 #define U5500_DMA_BASE 0x90030000 +#define U5500_STM_BASE 0x90020000 +#define U5500_STM_REG_BASE (U5500_STM_BASE + 0xF000) #define U5500_MCDE_BASE 0xA0400000 #define U5500_MODEM_BASE 0xB0000000 #define U5500_L2CC_BASE 0xA0412000 @@ -29,7 +31,9 @@ #define U5500_NAND0_BASE 0x60000000 #define U5500_NAND1_BASE 0x70000000 #define U5500_TWD_BASE 0xa0410600 +#define U5500_ICN_BASE 0xA0040000 #define U5500_B2R2_BASE 0xa0200000 +#define U5500_BOOT_ROM_BASE 0x90000000 #define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000) #define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000) @@ -60,6 +64,7 @@ #define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) #define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) #define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) +#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000) #define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000) #define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000) @@ -83,7 +88,7 @@ #define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000) #define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000) #define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000) -#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5000) +#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5100) #define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000) #define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000) #define U5500_CR_BASE (U5500_PER6_BASE + 0x8000) @@ -114,8 +119,19 @@ #define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20) #define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F) -#define U5500_ESRAM_BASE 0x40000000 +#define U5500_ACCCON_BASE_SEC (0xBFFF0000) +#define U5500_ACCCON_BASE (0xBFFF1000) +#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020) +#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC) + +#define U5500_ESRAM_BASE 0x40000000 #define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000 #define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET) +#define U5500_MCDE_SIZE 0x1000 +#define U5500_DSI_LINK_SIZE 0x1000 +#define U5500_DSI_LINK_COUNT 0x2 +#define U5500_DSI_LINK1_BASE (U5500_MCDE_BASE + U5500_MCDE_SIZE) +#define U5500_DSI_LINK2_BASE (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE) + #endif -- cgit v1.2.3 From 06be2efaf444f6b639892394e0a6afcd73fe1de4 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 29 Mar 2011 21:59:51 +0200 Subject: mach-ux500: update SoC and board IRQ handling This splits out a per-SoC IRQ range handling, so that the DB8500 and DB5500 SoC:s can reuse aproximately the same IRQ range with the largest span setting the roof. The same change is done for the boards, mutatis mutandis, with a new file for the U5500 board. Signed-off-by: Rabin Vincent Signed-off-by: Linus Walleij --- .../mach-ux500/include/mach/irqs-board-mop500.h | 5 ++ .../arm/mach-ux500/include/mach/irqs-board-u5500.h | 21 +++++++++ arch/arm/mach-ux500/include/mach/irqs-db5500.h | 27 +++++++++++ arch/arm/mach-ux500/include/mach/irqs-db8500.h | 54 ++++++++++++++++++++++ arch/arm/mach-ux500/include/mach/irqs.h | 46 +++++++++--------- 5 files changed, 129 insertions(+), 24 deletions(-) create mode 100644 arch/arm/mach-ux500/include/mach/irqs-board-u5500.h (limited to 'arch/arm/mach-ux500') diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 97ef55f84934..47969909836c 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -50,6 +50,11 @@ #define MOP500_IRQ_END MOP500_NR_IRQS +/* + * We may have several boards, but only one will run at a + * time, so the one with most IRQs will bump this ahead, + * but the IRQ_BOARD_START remains the same for either board. + */ #if MOP500_IRQ_END > IRQ_BOARD_END #undef IRQ_BOARD_END #define IRQ_BOARD_END MOP500_IRQ_END diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h new file mode 100644 index 000000000000..29d972c7717b --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_IRQS_BOARD_U5500_H +#define __MACH_IRQS_BOARD_U5500_H + +#define AB5500_NR_IRQS 5 +#define IRQ_AB5500_BASE IRQ_BOARD_START +#define IRQ_AB5500_END (IRQ_AB5500_BASE + AB5500_NR_IRQS) + +#define U5500_IRQ_END IRQ_AB5500_END + +#if IRQ_BOARD_END < U5500_IRQ_END +#undef IRQ_BOARD_END +#define IRQ_BOARD_END U5500_IRQ_END +#endif + +#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h index bfa123dbec3b..77239776a6f2 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h @@ -83,4 +83,31 @@ #define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125) #define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126) +#ifdef CONFIG_UX500_SOC_DB5500 + +/* + * After the GPIO ones we reserve a range of IRQ:s in which virtual + * IRQ:s representing modem IRQ:s can be allocated + */ +#define IRQ_MODEM_EVENTS_BASE IRQ_SOC_START +#define IRQ_MODEM_EVENTS_NBR 72 +#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) + +/* List of virtual IRQ:s that are allocated from the range above */ +#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) +#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) +#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) + +/* + * We may have several SoCs, but only one will run at a + * time, so the one with most IRQs will bump this ahead, + * but the IRQ_SOC_START remains the same for either SoC. + */ +#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END +#undef IRQ_SOC_END +#define IRQ_SOC_END IRQ_MODEM_EVENTS_END +#endif + +#endif /* CONFIG_UX500_SOC_DB5500 */ + #endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h index 8b5d9f0a1633..68bc14974608 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h @@ -93,4 +93,58 @@ #define IRQ_DB8500_GPIO7 (IRQ_SHPI_START + 126) #define IRQ_DB8500_GPIO8 (IRQ_SHPI_START + 127) +#define IRQ_CA_WAKE_REQ_ED (IRQ_SHPI_START + 71) +#define IRQ_AC_READ_NOTIFICATION_0_ED (IRQ_SHPI_START + 66) +#define IRQ_AC_READ_NOTIFICATION_1_ED (IRQ_SHPI_START + 64) +#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED (IRQ_SHPI_START + 67) +#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED (IRQ_SHPI_START + 65) + +#define IRQ_CA_WAKE_REQ_V1 (IRQ_SHPI_START + 83) +#define IRQ_AC_READ_NOTIFICATION_0_V1 (IRQ_SHPI_START + 78) +#define IRQ_AC_READ_NOTIFICATION_1_V1 (IRQ_SHPI_START + 76) +#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1 (IRQ_SHPI_START + 79) +#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1 (IRQ_SHPI_START + 77) + +#ifdef CONFIG_UX500_SOC_DB8500 + +/* Virtual interrupts corresponding to the PRCMU wakeups. */ +#define IRQ_PRCMU_BASE IRQ_SOC_START +#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE) + +#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE) +#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1) +#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2) +#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3) +#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4) +#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5) +#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6) +#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7) +#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8) +#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9) +#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10) +#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11) +#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12) +#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13) +#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14) +#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15) +#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16) +#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17) +#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18) +#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19) +#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20) +#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21) +#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22) +#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23) + +/* + * We may have several SoCs, but only one will run at a + * time, so the one with most IRQs will bump this ahead, + * but the IRQ_SOC_START remains the same for either SoC. + */ +#if IRQ_SOC_END < IRQ_PRCMU_END +#undef IRQ_SOC_END +#define IRQ_SOC_END IRQ_PRCMU_END +#endif + +#endif /* CONFIG_UX500_SOC_DB8500 */ #endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index ba1294c13c4d..9db68d264c5f 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -10,49 +10,47 @@ #ifndef ASM_ARCH_IRQS_H #define ASM_ARCH_IRQS_H -#include -#include +#include -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 /* Shared Peripheral Interrupt (SHPI) */ #define IRQ_SHPI_START 32 -/* Interrupt numbers generic for shared peripheral */ +/* + * MTU0 preserved for now until plat-nomadik is taught not to use it. Don't + * add any other IRQs here, use the irqs-dbx500.h files. + */ #define IRQ_MTU0 (IRQ_SHPI_START + 4) -/* There are 128 shared peripheral interrupts assigned to - * INTID[160:32]. The first 32 interrupts are reserved. - */ -#define DBX500_NR_INTERNAL_IRQS 161 +#define DBX500_NR_INTERNAL_IRQS 160 /* After chip-specific IRQ numbers we have the GPIO ones */ #define NOMADIK_NR_GPIO 288 #define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + DBX500_NR_INTERNAL_IRQS) #define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - DBX500_NR_INTERNAL_IRQS) -#define IRQ_BOARD_START NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) +#define IRQ_GPIO_END NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) + +#define IRQ_SOC_START IRQ_GPIO_END +/* This will be overridden by SoC-specific irq headers */ +#define IRQ_SOC_END IRQ_SOC_START +#include +#include + +#define IRQ_BOARD_START IRQ_SOC_END /* This will be overridden by board-specific irq headers */ -#define IRQ_BOARD_END IRQ_BOARD_START +#define IRQ_BOARD_END IRQ_BOARD_START #ifdef CONFIG_MACH_U8500 #include #endif -/* - * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual - * IRQ:s representing modem IRQ:s can be allocated - */ -#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1) -#define IRQ_MODEM_EVENTS_NBR 72 -#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) - -/* List of virtual IRQ:s that are allocated from the range above */ -#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) -#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) -#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) +#ifdef CONFIG_MACH_U5500 +#include +#endif -#define NR_IRQS IRQ_MODEM_EVENTS_END +#define NR_IRQS IRQ_BOARD_END #endif /* ASM_ARCH_IRQS_H */ -- cgit v1.2.3 From 5d99eaeef7023e06eeaf8d54be5976fbb4a99045 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 29 Mar 2011 22:05:06 +0200 Subject: mach-ux500: update ASIC version detection This makes the core detect the DB8500 V2.0 and V2.1 ASICs, and add a convenience macro for "V2 or later". Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/include/mach/id.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm/mach-ux500') diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h index f1288d10b6ab..02b541a37ee5 100644 --- a/arch/arm/mach-ux500/include/mach/id.h +++ b/arch/arm/mach-ux500/include/mach/id.h @@ -75,6 +75,26 @@ static inline bool __attribute_const__ cpu_is_u8500v2(void) return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0); } +static inline bool cpu_is_u8500v20(void) +{ + return cpu_is_u8500() && (dbx500_revision() == 0xB0); +} + +static inline bool cpu_is_u8500v21(void) +{ + return cpu_is_u8500() && (dbx500_revision() == 0xB1); +} + +static inline bool cpu_is_u8500v20_or_later(void) +{ + return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11(); +} + +static inline bool ux500_is_svp(void) +{ + return false; +} + #define ux500_unknown_soc() BUG() #endif -- cgit v1.2.3 From 9f3c645c68a42083117bbfeaa9aadb053b494090 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 28 Mar 2011 13:32:50 +0200 Subject: mach-ux500: rename PRCMU driver per SoC This renames the prcmu.c file to prcmu-db8500.c so as to indicate that it is for this one SoC. Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Makefile | 2 +- arch/arm/mach-ux500/prcmu-db8500.c | 394 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-ux500/prcmu.c | 394 ------------------------------------- 3 files changed, 395 insertions(+), 395 deletions(-) create mode 100644 arch/arm/mach-ux500/prcmu-db8500.c delete mode 100644 arch/arm/mach-ux500/prcmu.c (limited to 'arch/arm/mach-ux500') diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index b549a8fb4231..2a08a10e09da 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -5,7 +5,7 @@ obj-y := clock.o cpu.o devices.o devices-common.o \ id.o usb.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o -obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o +obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu-db8500.o obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ board-mop500-regulators.o \ board-mop500-uib.o board-mop500-stuib.o \ diff --git a/arch/arm/mach-ux500/prcmu-db8500.c b/arch/arm/mach-ux500/prcmu-db8500.c new file mode 100644 index 000000000000..c522d26ef348 --- /dev/null +++ b/arch/arm/mach-ux500/prcmu-db8500.c @@ -0,0 +1,394 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Kumar Sanghvi + * Author: Sundar Iyer + * Author: Mattias Nilsson + * + * U8500 PRCM Unit interface driver + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* Global var to runtime determine TCDM base for v2 or v1 */ +static __iomem void *tcdm_base; + +#define _MBOX_HEADER (tcdm_base + 0xFE8) +#define MBOX_HEADER_REQ_MB0 (_MBOX_HEADER + 0x0) + +#define REQ_MB1 (tcdm_base + 0xFD0) +#define REQ_MB5 (tcdm_base + 0xE44) + +#define REQ_MB1_ARMOPP (REQ_MB1 + 0x0) +#define REQ_MB1_APEOPP (REQ_MB1 + 0x1) +#define REQ_MB1_BOOSTOPP (REQ_MB1 + 0x2) + +#define ACK_MB1 (tcdm_base + 0xE04) +#define ACK_MB5 (tcdm_base + 0xDF4) + +#define ACK_MB1_CURR_ARMOPP (ACK_MB1 + 0x0) +#define ACK_MB1_CURR_APEOPP (ACK_MB1 + 0x1) + +#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5) +#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1) +#define REQ_MB5_I2C_REG (REQ_MB5 + 2) +#define REQ_MB5_I2C_VAL (REQ_MB5 + 3) + +#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1) +#define ACK_MB5_I2C_VAL (ACK_MB5 + 3) + +#define PRCM_AVS_VARM_MAX_OPP (tcdm_base + 0x2E4) +#define PRCM_AVS_ISMODEENABLE 7 +#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE) + +#define I2C_WRITE(slave) \ + (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) +#define I2C_READ(slave) \ + (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0)) +#define I2C_STOP_EN BIT(3) + +enum mb1_h { + MB1H_ARM_OPP = 1, + MB1H_APE_OPP, + MB1H_ARM_APE_OPP, +}; + +static struct { + struct mutex lock; + struct completion work; + struct { + u8 arm_opp; + u8 ape_opp; + u8 arm_status; + u8 ape_status; + } ack; +} mb1_transfer; + +enum ack_mb5_status { + I2C_WR_OK = 0x01, + I2C_RD_OK = 0x02, +}; + +#define MBOX_BIT BIT +#define NUM_MBOX 8 + +static struct { + struct mutex lock; + struct completion work; + bool failed; + struct { + u8 status; + u8 value; + } ack; +} mb5_transfer; + +/** + * prcmu_abb_read() - Read register value(s) from the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The read out value(s). + * @size: The number of registers to read. + * + * Reads register value(s) from the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if (size != 1) + return -EINVAL; + + r = mutex_lock_interruptible(&mb5_transfer.lock); + if (r) + return r; + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + + writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP); + writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); + writeb(reg, REQ_MB5_I2C_REG); + + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); + if (!wait_for_completion_timeout(&mb5_transfer.work, + msecs_to_jiffies(500))) { + pr_err("prcmu: prcmu_abb_read timed out.\n"); + r = -EIO; + goto unlock_and_return; + } + r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); + if (!r) + *value = mb5_transfer.ack.value; + +unlock_and_return: + mutex_unlock(&mb5_transfer.lock); + return r; +} +EXPORT_SYMBOL(prcmu_abb_read); + +/** + * prcmu_abb_write() - Write register value(s) to the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The value(s) to write. + * @size: The number of registers to write. + * + * Reads register value(s) from the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if (size != 1) + return -EINVAL; + + r = mutex_lock_interruptible(&mb5_transfer.lock); + if (r) + return r; + + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + + writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP); + writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); + writeb(reg, REQ_MB5_I2C_REG); + writeb(*value, REQ_MB5_I2C_VAL); + + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); + if (!wait_for_completion_timeout(&mb5_transfer.work, + msecs_to_jiffies(500))) { + pr_err("prcmu: prcmu_abb_write timed out.\n"); + r = -EIO; + goto unlock_and_return; + } + r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); + +unlock_and_return: + mutex_unlock(&mb5_transfer.lock); + return r; +} +EXPORT_SYMBOL(prcmu_abb_write); + +static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp, + enum prcmu_cpu_opp cpu_opp) +{ + bool do_ape; + bool do_arm; + int err = 0; + + do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP)); + do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP)); + + mutex_lock(&mb1_transfer.lock); + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(0, MBOX_HEADER_REQ_MB0); + writeb(cpu_opp, REQ_MB1_ARMOPP); + writeb(ape_opp, REQ_MB1_APEOPP); + writeb(0, REQ_MB1_BOOSTOPP); + writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); + wait_for_completion(&mb1_transfer.work); + if ((do_ape) && (mb1_transfer.ack.ape_status != 0)) + err = -EIO; + if ((do_arm) && (mb1_transfer.ack.arm_status != 0)) + err = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return err; +} + +/** + * prcmu_set_ape_opp() - Set the OPP of the APE. + * @opp: The OPP to set. + * + * This function sets the OPP of the APE. + */ +int prcmu_set_ape_opp(enum prcmu_ape_opp opp) +{ + return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE); +} +EXPORT_SYMBOL(prcmu_set_ape_opp); + +/** + * prcmu_set_cpu_opp() - Set the OPP of the CPU. + * @opp: The OPP to set. + * + * This function sets the OPP of the CPU. + */ +int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp) +{ + return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp); +} +EXPORT_SYMBOL(prcmu_set_cpu_opp); + +/** + * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU. + * @ape_opp: The APE OPP to set. + * @cpu_opp: The CPU OPP to set. + * + * This function sets the OPPs of the APE and the CPU. + */ +int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, + enum prcmu_cpu_opp cpu_opp) +{ + return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp); +} +EXPORT_SYMBOL(prcmu_set_ape_cpu_opps); + +/** + * prcmu_get_ape_opp() - Get the OPP of the APE. + * + * This function gets the OPP of the APE. + */ +enum prcmu_ape_opp prcmu_get_ape_opp(void) +{ + return readb(ACK_MB1_CURR_APEOPP); +} +EXPORT_SYMBOL(prcmu_get_ape_opp); + +/** + * prcmu_get_cpu_opp() - Get the OPP of the CPU. + * + * This function gets the OPP of the CPU. The OPP is specified in %%. + * PRCMU_OPP_EXT is a special OPP value, not specified in %%. + */ +int prcmu_get_cpu_opp(void) +{ + return readb(ACK_MB1_CURR_ARMOPP); +} +EXPORT_SYMBOL(prcmu_get_cpu_opp); + +bool prcmu_has_arm_maxopp(void) +{ + return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK) + == PRCM_AVS_ISMODEENABLE_MASK; +} + +static void read_mailbox_0(void) +{ + writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_1(void) +{ + mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP); + mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP); + complete(&mb1_transfer.work); + writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_2(void) +{ + writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_3(void) +{ + writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_4(void) +{ + writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_5(void) +{ + mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS); + mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL); + complete(&mb5_transfer.work); + writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_6(void) +{ + writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_7(void) +{ + writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR); +} + +static void (* const read_mailbox[NUM_MBOX])(void) = { + read_mailbox_0, + read_mailbox_1, + read_mailbox_2, + read_mailbox_3, + read_mailbox_4, + read_mailbox_5, + read_mailbox_6, + read_mailbox_7 +}; + +static irqreturn_t prcmu_irq_handler(int irq, void *data) +{ + u32 bits; + u8 n; + + bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1)); + if (unlikely(!bits)) + return IRQ_NONE; + + for (n = 0; bits; n++) { + if (bits & MBOX_BIT(n)) { + bits -= MBOX_BIT(n); + read_mailbox[n](); + } + } + return IRQ_HANDLED; +} + +void __init prcmu_early_init(void) +{ + if (cpu_is_u8500v11() || cpu_is_u8500ed()) { + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1); + } else if (cpu_is_u8500v2()) { + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE); + } else { + pr_err("prcmu: Unsupported chip version\n"); + BUG(); + } +} + +static int __init prcmu_init(void) +{ + if (cpu_is_u8500ed()) { + pr_err("prcmu: Unsupported chip version\n"); + return 0; + } + + mutex_init(&mb1_transfer.lock); + init_completion(&mb1_transfer.work); + mutex_init(&mb5_transfer.lock); + init_completion(&mb5_transfer.work); + + /* Clean up the mailbox interrupts after pre-kernel code. */ + writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR); + + return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0, + "prcmu", NULL); +} + +arch_initcall(prcmu_init); diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c deleted file mode 100644 index c522d26ef348..000000000000 --- a/arch/arm/mach-ux500/prcmu.c +++ /dev/null @@ -1,394 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * Author: Kumar Sanghvi - * Author: Sundar Iyer - * Author: Mattias Nilsson - * - * U8500 PRCM Unit interface driver - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -/* Global var to runtime determine TCDM base for v2 or v1 */ -static __iomem void *tcdm_base; - -#define _MBOX_HEADER (tcdm_base + 0xFE8) -#define MBOX_HEADER_REQ_MB0 (_MBOX_HEADER + 0x0) - -#define REQ_MB1 (tcdm_base + 0xFD0) -#define REQ_MB5 (tcdm_base + 0xE44) - -#define REQ_MB1_ARMOPP (REQ_MB1 + 0x0) -#define REQ_MB1_APEOPP (REQ_MB1 + 0x1) -#define REQ_MB1_BOOSTOPP (REQ_MB1 + 0x2) - -#define ACK_MB1 (tcdm_base + 0xE04) -#define ACK_MB5 (tcdm_base + 0xDF4) - -#define ACK_MB1_CURR_ARMOPP (ACK_MB1 + 0x0) -#define ACK_MB1_CURR_APEOPP (ACK_MB1 + 0x1) - -#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5) -#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1) -#define REQ_MB5_I2C_REG (REQ_MB5 + 2) -#define REQ_MB5_I2C_VAL (REQ_MB5 + 3) - -#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1) -#define ACK_MB5_I2C_VAL (ACK_MB5 + 3) - -#define PRCM_AVS_VARM_MAX_OPP (tcdm_base + 0x2E4) -#define PRCM_AVS_ISMODEENABLE 7 -#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE) - -#define I2C_WRITE(slave) \ - (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) -#define I2C_READ(slave) \ - (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0)) -#define I2C_STOP_EN BIT(3) - -enum mb1_h { - MB1H_ARM_OPP = 1, - MB1H_APE_OPP, - MB1H_ARM_APE_OPP, -}; - -static struct { - struct mutex lock; - struct completion work; - struct { - u8 arm_opp; - u8 ape_opp; - u8 arm_status; - u8 ape_status; - } ack; -} mb1_transfer; - -enum ack_mb5_status { - I2C_WR_OK = 0x01, - I2C_RD_OK = 0x02, -}; - -#define MBOX_BIT BIT -#define NUM_MBOX 8 - -static struct { - struct mutex lock; - struct completion work; - bool failed; - struct { - u8 status; - u8 value; - } ack; -} mb5_transfer; - -/** - * prcmu_abb_read() - Read register value(s) from the ABB. - * @slave: The I2C slave address. - * @reg: The (start) register address. - * @value: The read out value(s). - * @size: The number of registers to read. - * - * Reads register value(s) from the ABB. - * @size has to be 1 for the current firmware version. - */ -int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) -{ - int r; - - if (size != 1) - return -EINVAL; - - r = mutex_lock_interruptible(&mb5_transfer.lock); - if (r) - return r; - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) - cpu_relax(); - - writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP); - writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); - writeb(reg, REQ_MB5_I2C_REG); - - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); - if (!wait_for_completion_timeout(&mb5_transfer.work, - msecs_to_jiffies(500))) { - pr_err("prcmu: prcmu_abb_read timed out.\n"); - r = -EIO; - goto unlock_and_return; - } - r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); - if (!r) - *value = mb5_transfer.ack.value; - -unlock_and_return: - mutex_unlock(&mb5_transfer.lock); - return r; -} -EXPORT_SYMBOL(prcmu_abb_read); - -/** - * prcmu_abb_write() - Write register value(s) to the ABB. - * @slave: The I2C slave address. - * @reg: The (start) register address. - * @value: The value(s) to write. - * @size: The number of registers to write. - * - * Reads register value(s) from the ABB. - * @size has to be 1 for the current firmware version. - */ -int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) -{ - int r; - - if (size != 1) - return -EINVAL; - - r = mutex_lock_interruptible(&mb5_transfer.lock); - if (r) - return r; - - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) - cpu_relax(); - - writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP); - writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); - writeb(reg, REQ_MB5_I2C_REG); - writeb(*value, REQ_MB5_I2C_VAL); - - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); - if (!wait_for_completion_timeout(&mb5_transfer.work, - msecs_to_jiffies(500))) { - pr_err("prcmu: prcmu_abb_write timed out.\n"); - r = -EIO; - goto unlock_and_return; - } - r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); - -unlock_and_return: - mutex_unlock(&mb5_transfer.lock); - return r; -} -EXPORT_SYMBOL(prcmu_abb_write); - -static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp) -{ - bool do_ape; - bool do_arm; - int err = 0; - - do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP)); - do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP)); - - mutex_lock(&mb1_transfer.lock); - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) - cpu_relax(); - - writeb(0, MBOX_HEADER_REQ_MB0); - writeb(cpu_opp, REQ_MB1_ARMOPP); - writeb(ape_opp, REQ_MB1_APEOPP); - writeb(0, REQ_MB1_BOOSTOPP); - writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); - wait_for_completion(&mb1_transfer.work); - if ((do_ape) && (mb1_transfer.ack.ape_status != 0)) - err = -EIO; - if ((do_arm) && (mb1_transfer.ack.arm_status != 0)) - err = -EIO; - - mutex_unlock(&mb1_transfer.lock); - - return err; -} - -/** - * prcmu_set_ape_opp() - Set the OPP of the APE. - * @opp: The OPP to set. - * - * This function sets the OPP of the APE. - */ -int prcmu_set_ape_opp(enum prcmu_ape_opp opp) -{ - return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE); -} -EXPORT_SYMBOL(prcmu_set_ape_opp); - -/** - * prcmu_set_cpu_opp() - Set the OPP of the CPU. - * @opp: The OPP to set. - * - * This function sets the OPP of the CPU. - */ -int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp) -{ - return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp); -} -EXPORT_SYMBOL(prcmu_set_cpu_opp); - -/** - * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU. - * @ape_opp: The APE OPP to set. - * @cpu_opp: The CPU OPP to set. - * - * This function sets the OPPs of the APE and the CPU. - */ -int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp) -{ - return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp); -} -EXPORT_SYMBOL(prcmu_set_ape_cpu_opps); - -/** - * prcmu_get_ape_opp() - Get the OPP of the APE. - * - * This function gets the OPP of the APE. - */ -enum prcmu_ape_opp prcmu_get_ape_opp(void) -{ - return readb(ACK_MB1_CURR_APEOPP); -} -EXPORT_SYMBOL(prcmu_get_ape_opp); - -/** - * prcmu_get_cpu_opp() - Get the OPP of the CPU. - * - * This function gets the OPP of the CPU. The OPP is specified in %%. - * PRCMU_OPP_EXT is a special OPP value, not specified in %%. - */ -int prcmu_get_cpu_opp(void) -{ - return readb(ACK_MB1_CURR_ARMOPP); -} -EXPORT_SYMBOL(prcmu_get_cpu_opp); - -bool prcmu_has_arm_maxopp(void) -{ - return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK) - == PRCM_AVS_ISMODEENABLE_MASK; -} - -static void read_mailbox_0(void) -{ - writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_1(void) -{ - mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP); - mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP); - complete(&mb1_transfer.work); - writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_2(void) -{ - writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_3(void) -{ - writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_4(void) -{ - writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_5(void) -{ - mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS); - mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL); - complete(&mb5_transfer.work); - writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_6(void) -{ - writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_7(void) -{ - writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR); -} - -static void (* const read_mailbox[NUM_MBOX])(void) = { - read_mailbox_0, - read_mailbox_1, - read_mailbox_2, - read_mailbox_3, - read_mailbox_4, - read_mailbox_5, - read_mailbox_6, - read_mailbox_7 -}; - -static irqreturn_t prcmu_irq_handler(int irq, void *data) -{ - u32 bits; - u8 n; - - bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1)); - if (unlikely(!bits)) - return IRQ_NONE; - - for (n = 0; bits; n++) { - if (bits & MBOX_BIT(n)) { - bits -= MBOX_BIT(n); - read_mailbox[n](); - } - } - return IRQ_HANDLED; -} - -void __init prcmu_early_init(void) -{ - if (cpu_is_u8500v11() || cpu_is_u8500ed()) { - tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1); - } else if (cpu_is_u8500v2()) { - tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE); - } else { - pr_err("prcmu: Unsupported chip version\n"); - BUG(); - } -} - -static int __init prcmu_init(void) -{ - if (cpu_is_u8500ed()) { - pr_err("prcmu: Unsupported chip version\n"); - return 0; - } - - mutex_init(&mb1_transfer.lock); - init_completion(&mb1_transfer.work); - mutex_init(&mb5_transfer.lock); - init_completion(&mb5_transfer.work); - - /* Clean up the mailbox interrupts after pre-kernel code. */ - writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR); - - return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0, - "prcmu", NULL); -} - -arch_initcall(prcmu_init); -- cgit v1.2.3 From 118718905de6e32c11e09a8f41c7abff6155ba19 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 29 Mar 2011 16:53:29 +0200 Subject: mach-ux500: make PRCMU base address dynamic This makes the PRCMU base address be selected at runtime for U8500 and U5500 instead of being compiled-in. Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db5500.c | 2 ++ arch/arm/mach-ux500/cpu-db8500.c | 2 ++ arch/arm/mach-ux500/cpu.c | 2 ++ arch/arm/mach-ux500/include/mach/hardware.h | 1 + arch/arm/mach-ux500/include/mach/prcmu-regs.h | 2 -- 5 files changed, 7 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-ux500') diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index c9dc2eff3cb2..c01bc19e3c5e 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -188,6 +188,8 @@ void __init u5500_map_io(void) ux500_map_io(); iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc)); + + _PRCMU_BASE = __io_address(U5500_PRCMU_BASE); } static int usb_db5500_rx_dma_cfg[] = { diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 516126cb357d..3d419fef0470 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -87,6 +87,8 @@ void __init u8500_map_io(void) iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc)); else if (cpu_is_u8500v2()) iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc)); + + _PRCMU_BASE = __io_address(U8500_PRCMU_BASE); } static struct resource db8500_pmu_resources[] = { diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 5a43107c6232..0190e0e68b4d 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -23,6 +23,8 @@ #include "clock.h" +void __iomem *_PRCMU_BASE; + #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2x0_base; #endif diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index bf63f2631ba0..2c6f71049f2e 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -35,6 +35,7 @@ #ifndef __ASSEMBLY__ #include +extern void __iomem *_PRCMU_BASE; #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h index 455467e88791..c1226da19bfb 100644 --- a/arch/arm/mach-ux500/include/mach/prcmu-regs.h +++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h @@ -15,8 +15,6 @@ #include -#define _PRCMU_BASE IO_ADDRESS(U8500_PRCMU_BASE) - #define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) #define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) #define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) -- cgit v1.2.3 From 650c2a2145981696c414be1d540a32447d0e353e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 15 May 2011 22:53:56 +0200 Subject: mach-ux500: move the DB8500 PRCMU driver to MFD We have decided that this function arbiter fits better in the MFD subsystem. Since we need to concatenate the split header files we move it basically like this: mv mach-ux500/prcmu-db8500.c drivers/mfd/db8500-prcmu.c mv mach-ux500/include/mach/prcmu-defs.h include/linux/mfd/db8500-prcmu.h mv mach-ux500/include/mach/prcmu-regs.h drivers/mfd/db8500-prcmu-regs.h mach-ux500/include/mach/prcmu.h >> include/linux/mfd/db8500-prcmu.h rm arch/arm/mach-ux500/include/mach/prcmu.h Then we update different #include statements and Makefile orders etc to make the PRCMU driver compile, link and boot in the new place without really changing any code. Acked-by: Samuel Ortiz Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + arch/arm/mach-ux500/Makefile | 2 +- arch/arm/mach-ux500/cpu.c | 2 +- arch/arm/mach-ux500/cpufreq.c | 3 +- arch/arm/mach-ux500/include/mach/prcmu-defs.h | 30 -- arch/arm/mach-ux500/include/mach/prcmu-regs.h | 94 ------ arch/arm/mach-ux500/include/mach/prcmu.h | 28 -- arch/arm/mach-ux500/prcmu-db8500.c | 394 ------------------------- drivers/mfd/Kconfig | 12 +- drivers/mfd/Makefile | 4 +- drivers/mfd/ab8500-i2c.c | 3 +- drivers/mfd/db8500-prcmu-regs.h | 94 ++++++ drivers/mfd/db8500-prcmu.c | 395 ++++++++++++++++++++++++++ include/linux/mfd/db8500-prcmu.h | 58 ++++ 14 files changed, 566 insertions(+), 554 deletions(-) delete mode 100644 arch/arm/mach-ux500/include/mach/prcmu-defs.h delete mode 100644 arch/arm/mach-ux500/include/mach/prcmu-regs.h delete mode 100644 arch/arm/mach-ux500/include/mach/prcmu.h delete mode 100644 arch/arm/mach-ux500/prcmu-db8500.c create mode 100644 drivers/mfd/db8500-prcmu-regs.h create mode 100644 drivers/mfd/db8500-prcmu.c create mode 100644 include/linux/mfd/db8500-prcmu.h (limited to 'arch/arm/mach-ux500') diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 58626013aa32..8071d2746f70 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -15,6 +15,7 @@ config UX500_SOC_DB5500 config UX500_SOC_DB8500 bool "DB8500" + select MFD_DB8500_PRCMU endmenu diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 2a08a10e09da..7a1d43e04f97 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -5,7 +5,7 @@ obj-y := clock.o cpu.o devices.o devices-common.o \ id.o usb.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o -obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu-db8500.o +obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ board-mop500-regulators.o \ board-mop500-uib.o board-mop500-stuib.o \ diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 0190e0e68b4d..11360f734cec 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include @@ -19,7 +20,6 @@ #include #include #include -#include #include "clock.h" diff --git a/arch/arm/mach-ux500/cpufreq.c b/arch/arm/mach-ux500/cpufreq.c index 5c5b747f134d..d196939fcdb9 100644 --- a/arch/arm/mach-ux500/cpufreq.c +++ b/arch/arm/mach-ux500/cpufreq.c @@ -17,10 +17,9 @@ #include #include #include +#include #include -#include -#include #define DRIVER_NAME "cpufreq-u8500" #define CPUFREQ_NAME "u8500" diff --git a/arch/arm/mach-ux500/include/mach/prcmu-defs.h b/arch/arm/mach-ux500/include/mach/prcmu-defs.h deleted file mode 100644 index 848ba64b561f..000000000000 --- a/arch/arm/mach-ux500/include/mach/prcmu-defs.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Sundar Iyer - * Author: Martin Persson - * - * License Terms: GNU General Public License v2 - * - * PRCM Unit definitions - */ - -#ifndef __MACH_PRCMU_DEFS_H -#define __MACH_PRCMU_DEFS_H - -enum prcmu_cpu_opp { - CPU_OPP_INIT = 0x00, - CPU_OPP_NO_CHANGE = 0x01, - CPU_OPP_100 = 0x02, - CPU_OPP_50 = 0x03, - CPU_OPP_MAX = 0x04, - CPU_OPP_EXT_CLK = 0x07 -}; -enum prcmu_ape_opp { - APE_OPP_NO_CHANGE = 0x00, - APE_OPP_100 = 0x02, - APE_OPP_50 = 0x03, -}; - -#endif /* __MACH_PRCMU_DEFS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h deleted file mode 100644 index c1226da19bfb..000000000000 --- a/arch/arm/mach-ux500/include/mach/prcmu-regs.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Kumar Sanghvi - * Author: Sundar Iyer - * - * License Terms: GNU General Public License v2 - * - * PRCM Unit registers - */ - -#ifndef __MACH_PRCMU_REGS_H -#define __MACH_PRCMU_REGS_H - -#include - -#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) -#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) -#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) -#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0) -#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4) -#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0) -#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c) -#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308) - -/* ARM WFI Standby signal register */ -#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) -#define PRCMU_IOCR (_PRCMU_BASE + 0x310) - -/* CPU mailbox registers */ -#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc) -#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100) -#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104) - -/* Dual A9 core interrupt management unit registers */ -#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328) -#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c) -#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c) -#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120) -#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124) -#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128) -#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C) -#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260) -#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264) -#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268) -#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C) - -#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334) -#define ARM_WAKEUP_MODEM 0x1 - -#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C) -#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494) -#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174) - -#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148) -#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150) -#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158) -#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160) -#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168) -#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484) -#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488) -#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018) - -/* System reset register */ -#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228) - -/* Level shifter and clamp control registers */ -#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) -#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) - -/* PRCMU clock/PLL/reset registers */ -#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) -#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) -#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044) -#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064) -#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058) -#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c) -#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) -#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) -#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) -#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) - -/* ePOD and memory power signal control registers */ -#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410) -#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304) - -/* Debug power control unit registers */ -#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254) - -/* Miscellaneous unit registers */ -#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) - -#endif /* __MACH_PRCMU_REGS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h deleted file mode 100644 index c49e456162ef..000000000000 --- a/arch/arm/mach-ux500/include/mach/prcmu.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Kumar Sanghvi - * Author: Sundar Iyer - * Author: Mattias Nilsson - * - * License Terms: GNU General Public License v2 - * - * PRCM Unit f/w API - */ -#ifndef __MACH_PRCMU_H -#define __MACH_PRCMU_H -#include - -void __init prcmu_early_init(void); -int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); -int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); -int prcmu_set_ape_opp(enum prcmu_ape_opp opp); -int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp); -int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp); -int prcmu_get_ape_opp(void); -int prcmu_get_cpu_opp(void); -bool prcmu_has_arm_maxopp(void); - -#endif /* __MACH_PRCMU_H */ diff --git a/arch/arm/mach-ux500/prcmu-db8500.c b/arch/arm/mach-ux500/prcmu-db8500.c deleted file mode 100644 index c522d26ef348..000000000000 --- a/arch/arm/mach-ux500/prcmu-db8500.c +++ /dev/null @@ -1,394 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * Author: Kumar Sanghvi - * Author: Sundar Iyer - * Author: Mattias Nilsson - * - * U8500 PRCM Unit interface driver - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -/* Global var to runtime determine TCDM base for v2 or v1 */ -static __iomem void *tcdm_base; - -#define _MBOX_HEADER (tcdm_base + 0xFE8) -#define MBOX_HEADER_REQ_MB0 (_MBOX_HEADER + 0x0) - -#define REQ_MB1 (tcdm_base + 0xFD0) -#define REQ_MB5 (tcdm_base + 0xE44) - -#define REQ_MB1_ARMOPP (REQ_MB1 + 0x0) -#define REQ_MB1_APEOPP (REQ_MB1 + 0x1) -#define REQ_MB1_BOOSTOPP (REQ_MB1 + 0x2) - -#define ACK_MB1 (tcdm_base + 0xE04) -#define ACK_MB5 (tcdm_base + 0xDF4) - -#define ACK_MB1_CURR_ARMOPP (ACK_MB1 + 0x0) -#define ACK_MB1_CURR_APEOPP (ACK_MB1 + 0x1) - -#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5) -#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1) -#define REQ_MB5_I2C_REG (REQ_MB5 + 2) -#define REQ_MB5_I2C_VAL (REQ_MB5 + 3) - -#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1) -#define ACK_MB5_I2C_VAL (ACK_MB5 + 3) - -#define PRCM_AVS_VARM_MAX_OPP (tcdm_base + 0x2E4) -#define PRCM_AVS_ISMODEENABLE 7 -#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE) - -#define I2C_WRITE(slave) \ - (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) -#define I2C_READ(slave) \ - (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0)) -#define I2C_STOP_EN BIT(3) - -enum mb1_h { - MB1H_ARM_OPP = 1, - MB1H_APE_OPP, - MB1H_ARM_APE_OPP, -}; - -static struct { - struct mutex lock; - struct completion work; - struct { - u8 arm_opp; - u8 ape_opp; - u8 arm_status; - u8 ape_status; - } ack; -} mb1_transfer; - -enum ack_mb5_status { - I2C_WR_OK = 0x01, - I2C_RD_OK = 0x02, -}; - -#define MBOX_BIT BIT -#define NUM_MBOX 8 - -static struct { - struct mutex lock; - struct completion work; - bool failed; - struct { - u8 status; - u8 value; - } ack; -} mb5_transfer; - -/** - * prcmu_abb_read() - Read register value(s) from the ABB. - * @slave: The I2C slave address. - * @reg: The (start) register address. - * @value: The read out value(s). - * @size: The number of registers to read. - * - * Reads register value(s) from the ABB. - * @size has to be 1 for the current firmware version. - */ -int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) -{ - int r; - - if (size != 1) - return -EINVAL; - - r = mutex_lock_interruptible(&mb5_transfer.lock); - if (r) - return r; - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) - cpu_relax(); - - writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP); - writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); - writeb(reg, REQ_MB5_I2C_REG); - - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); - if (!wait_for_completion_timeout(&mb5_transfer.work, - msecs_to_jiffies(500))) { - pr_err("prcmu: prcmu_abb_read timed out.\n"); - r = -EIO; - goto unlock_and_return; - } - r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); - if (!r) - *value = mb5_transfer.ack.value; - -unlock_and_return: - mutex_unlock(&mb5_transfer.lock); - return r; -} -EXPORT_SYMBOL(prcmu_abb_read); - -/** - * prcmu_abb_write() - Write register value(s) to the ABB. - * @slave: The I2C slave address. - * @reg: The (start) register address. - * @value: The value(s) to write. - * @size: The number of registers to write. - * - * Reads register value(s) from the ABB. - * @size has to be 1 for the current firmware version. - */ -int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) -{ - int r; - - if (size != 1) - return -EINVAL; - - r = mutex_lock_interruptible(&mb5_transfer.lock); - if (r) - return r; - - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) - cpu_relax(); - - writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP); - writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); - writeb(reg, REQ_MB5_I2C_REG); - writeb(*value, REQ_MB5_I2C_VAL); - - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); - if (!wait_for_completion_timeout(&mb5_transfer.work, - msecs_to_jiffies(500))) { - pr_err("prcmu: prcmu_abb_write timed out.\n"); - r = -EIO; - goto unlock_and_return; - } - r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); - -unlock_and_return: - mutex_unlock(&mb5_transfer.lock); - return r; -} -EXPORT_SYMBOL(prcmu_abb_write); - -static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp) -{ - bool do_ape; - bool do_arm; - int err = 0; - - do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP)); - do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP)); - - mutex_lock(&mb1_transfer.lock); - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) - cpu_relax(); - - writeb(0, MBOX_HEADER_REQ_MB0); - writeb(cpu_opp, REQ_MB1_ARMOPP); - writeb(ape_opp, REQ_MB1_APEOPP); - writeb(0, REQ_MB1_BOOSTOPP); - writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); - wait_for_completion(&mb1_transfer.work); - if ((do_ape) && (mb1_transfer.ack.ape_status != 0)) - err = -EIO; - if ((do_arm) && (mb1_transfer.ack.arm_status != 0)) - err = -EIO; - - mutex_unlock(&mb1_transfer.lock); - - return err; -} - -/** - * prcmu_set_ape_opp() - Set the OPP of the APE. - * @opp: The OPP to set. - * - * This function sets the OPP of the APE. - */ -int prcmu_set_ape_opp(enum prcmu_ape_opp opp) -{ - return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE); -} -EXPORT_SYMBOL(prcmu_set_ape_opp); - -/** - * prcmu_set_cpu_opp() - Set the OPP of the CPU. - * @opp: The OPP to set. - * - * This function sets the OPP of the CPU. - */ -int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp) -{ - return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp); -} -EXPORT_SYMBOL(prcmu_set_cpu_opp); - -/** - * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU. - * @ape_opp: The APE OPP to set. - * @cpu_opp: The CPU OPP to set. - * - * This function sets the OPPs of the APE and the CPU. - */ -int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp) -{ - return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp); -} -EXPORT_SYMBOL(prcmu_set_ape_cpu_opps); - -/** - * prcmu_get_ape_opp() - Get the OPP of the APE. - * - * This function gets the OPP of the APE. - */ -enum prcmu_ape_opp prcmu_get_ape_opp(void) -{ - return readb(ACK_MB1_CURR_APEOPP); -} -EXPORT_SYMBOL(prcmu_get_ape_opp); - -/** - * prcmu_get_cpu_opp() - Get the OPP of the CPU. - * - * This function gets the OPP of the CPU. The OPP is specified in %%. - * PRCMU_OPP_EXT is a special OPP value, not specified in %%. - */ -int prcmu_get_cpu_opp(void) -{ - return readb(ACK_MB1_CURR_ARMOPP); -} -EXPORT_SYMBOL(prcmu_get_cpu_opp); - -bool prcmu_has_arm_maxopp(void) -{ - return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK) - == PRCM_AVS_ISMODEENABLE_MASK; -} - -static void read_mailbox_0(void) -{ - writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_1(void) -{ - mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP); - mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP); - complete(&mb1_transfer.work); - writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_2(void) -{ - writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_3(void) -{ - writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_4(void) -{ - writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_5(void) -{ - mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS); - mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL); - complete(&mb5_transfer.work); - writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_6(void) -{ - writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_7(void) -{ - writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR); -} - -static void (* const read_mailbox[NUM_MBOX])(void) = { - read_mailbox_0, - read_mailbox_1, - read_mailbox_2, - read_mailbox_3, - read_mailbox_4, - read_mailbox_5, - read_mailbox_6, - read_mailbox_7 -}; - -static irqreturn_t prcmu_irq_handler(int irq, void *data) -{ - u32 bits; - u8 n; - - bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1)); - if (unlikely(!bits)) - return IRQ_NONE; - - for (n = 0; bits; n++) { - if (bits & MBOX_BIT(n)) { - bits -= MBOX_BIT(n); - read_mailbox[n](); - } - } - return IRQ_HANDLED; -} - -void __init prcmu_early_init(void) -{ - if (cpu_is_u8500v11() || cpu_is_u8500ed()) { - tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1); - } else if (cpu_is_u8500v2()) { - tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE); - } else { - pr_err("prcmu: Unsupported chip version\n"); - BUG(); - } -} - -static int __init prcmu_init(void) -{ - if (cpu_is_u8500ed()) { - pr_err("prcmu: Unsupported chip version\n"); - return 0; - } - - mutex_init(&mb1_transfer.lock); - init_completion(&mb1_transfer.work); - mutex_init(&mb5_transfer.lock); - init_completion(&mb5_transfer.work); - - /* Clean up the mailbox interrupts after pre-kernel code. */ - writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR); - - return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0, - "prcmu", NULL); -} - -arch_initcall(prcmu_init); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 3ed3ff06be5d..7eaeb9750793 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -538,7 +538,7 @@ config AB8500_CORE config AB8500_I2C_CORE bool "AB8500 register access via PRCMU I2C" - depends on AB8500_CORE && UX500_SOC_DB8500 + depends on AB8500_CORE && MFD_DB8500_PRCMU default y help This enables register access to the AB8500 chip via PRCMU I2C. @@ -575,6 +575,16 @@ config AB3550_CORE LEDs, vibrator, system power and temperature, power management and ALSA sound. +config MFD_DB8500_PRCMU + bool "ST-Ericsson DB8500 Power Reset Control Management Unit" + depends on UX500_SOC_DB8500 + select MFD_CORE + help + Select this option to enable support for the DB8500 Power Reset + and Control Management Unit. This is basically an autonomous + system controller running an XP70 microprocessor, which is accessed + through a register map. + config MFD_CS5535 tristate "Support for CS5535 and CS5536 southbridge core functions" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 419caa9d7dcf..814c57a692a9 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -74,9 +74,11 @@ obj-$(CONFIG_AB3100_CORE) += ab3100-core.o obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o obj-$(CONFIG_AB3550_CORE) += ab3550-core.o obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o -obj-$(CONFIG_AB8500_I2C_CORE) += ab8500-i2c.o obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o +obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o +# ab8500-i2c need to come after db8500-prcmu (which provides the channel) +obj-$(CONFIG_AB8500_I2C_CORE) += ab8500-i2c.o obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o obj-$(CONFIG_PMIC_ADP5520) += adp5520.o obj-$(CONFIG_LPC_SCH) += lpc_sch.o diff --git a/drivers/mfd/ab8500-i2c.c b/drivers/mfd/ab8500-i2c.c index 821e6b86afd2..9be541c6b004 100644 --- a/drivers/mfd/ab8500-i2c.c +++ b/drivers/mfd/ab8500-i2c.c @@ -11,8 +11,7 @@ #include #include #include - -#include +#include static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data) { diff --git a/drivers/mfd/db8500-prcmu-regs.h b/drivers/mfd/db8500-prcmu-regs.h new file mode 100644 index 000000000000..c1226da19bfb --- /dev/null +++ b/drivers/mfd/db8500-prcmu-regs.h @@ -0,0 +1,94 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Kumar Sanghvi + * Author: Sundar Iyer + * + * License Terms: GNU General Public License v2 + * + * PRCM Unit registers + */ + +#ifndef __MACH_PRCMU_REGS_H +#define __MACH_PRCMU_REGS_H + +#include + +#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) +#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) +#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) +#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0) +#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4) +#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0) +#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c) +#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308) + +/* ARM WFI Standby signal register */ +#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) +#define PRCMU_IOCR (_PRCMU_BASE + 0x310) + +/* CPU mailbox registers */ +#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc) +#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100) +#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104) + +/* Dual A9 core interrupt management unit registers */ +#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328) +#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c) +#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c) +#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120) +#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124) +#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128) +#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C) +#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260) +#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264) +#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268) +#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C) + +#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334) +#define ARM_WAKEUP_MODEM 0x1 + +#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C) +#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494) +#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174) + +#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148) +#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150) +#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158) +#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160) +#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168) +#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484) +#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488) +#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018) + +/* System reset register */ +#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228) + +/* Level shifter and clamp control registers */ +#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) +#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) + +/* PRCMU clock/PLL/reset registers */ +#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) +#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) +#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044) +#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064) +#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058) +#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c) +#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) +#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) +#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) +#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) + +/* ePOD and memory power signal control registers */ +#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410) +#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304) + +/* Debug power control unit registers */ +#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254) + +/* Miscellaneous unit registers */ +#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) + +#endif /* __MACH_PRCMU_REGS_H */ diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c new file mode 100644 index 000000000000..31f18c8c6bf8 --- /dev/null +++ b/drivers/mfd/db8500-prcmu.c @@ -0,0 +1,395 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Kumar Sanghvi + * Author: Sundar Iyer + * Author: Mattias Nilsson + * + * U8500 PRCM Unit interface driver + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "db8500-prcmu-regs.h" + +/* Global var to runtime determine TCDM base for v2 or v1 */ +static __iomem void *tcdm_base; + +#define _MBOX_HEADER (tcdm_base + 0xFE8) +#define MBOX_HEADER_REQ_MB0 (_MBOX_HEADER + 0x0) + +#define REQ_MB1 (tcdm_base + 0xFD0) +#define REQ_MB5 (tcdm_base + 0xE44) + +#define REQ_MB1_ARMOPP (REQ_MB1 + 0x0) +#define REQ_MB1_APEOPP (REQ_MB1 + 0x1) +#define REQ_MB1_BOOSTOPP (REQ_MB1 + 0x2) + +#define ACK_MB1 (tcdm_base + 0xE04) +#define ACK_MB5 (tcdm_base + 0xDF4) + +#define ACK_MB1_CURR_ARMOPP (ACK_MB1 + 0x0) +#define ACK_MB1_CURR_APEOPP (ACK_MB1 + 0x1) + +#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5) +#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1) +#define REQ_MB5_I2C_REG (REQ_MB5 + 2) +#define REQ_MB5_I2C_VAL (REQ_MB5 + 3) + +#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1) +#define ACK_MB5_I2C_VAL (ACK_MB5 + 3) + +#define PRCM_AVS_VARM_MAX_OPP (tcdm_base + 0x2E4) +#define PRCM_AVS_ISMODEENABLE 7 +#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE) + +#define I2C_WRITE(slave) \ + (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) +#define I2C_READ(slave) \ + (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0)) +#define I2C_STOP_EN BIT(3) + +enum mb1_h { + MB1H_ARM_OPP = 1, + MB1H_APE_OPP, + MB1H_ARM_APE_OPP, +}; + +static struct { + struct mutex lock; + struct completion work; + struct { + u8 arm_opp; + u8 ape_opp; + u8 arm_status; + u8 ape_status; + } ack; +} mb1_transfer; + +enum ack_mb5_status { + I2C_WR_OK = 0x01, + I2C_RD_OK = 0x02, +}; + +#define MBOX_BIT BIT +#define NUM_MBOX 8 + +static struct { + struct mutex lock; + struct completion work; + bool failed; + struct { + u8 status; + u8 value; + } ack; +} mb5_transfer; + +/** + * prcmu_abb_read() - Read register value(s) from the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The read out value(s). + * @size: The number of registers to read. + * + * Reads register value(s) from the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if (size != 1) + return -EINVAL; + + r = mutex_lock_interruptible(&mb5_transfer.lock); + if (r) + return r; + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + + writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP); + writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); + writeb(reg, REQ_MB5_I2C_REG); + + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); + if (!wait_for_completion_timeout(&mb5_transfer.work, + msecs_to_jiffies(500))) { + pr_err("prcmu: prcmu_abb_read timed out.\n"); + r = -EIO; + goto unlock_and_return; + } + r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); + if (!r) + *value = mb5_transfer.ack.value; + +unlock_and_return: + mutex_unlock(&mb5_transfer.lock); + return r; +} +EXPORT_SYMBOL(prcmu_abb_read); + +/** + * prcmu_abb_write() - Write register value(s) to the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The value(s) to write. + * @size: The number of registers to write. + * + * Reads register value(s) from the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if (size != 1) + return -EINVAL; + + r = mutex_lock_interruptible(&mb5_transfer.lock); + if (r) + return r; + + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + + writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP); + writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); + writeb(reg, REQ_MB5_I2C_REG); + writeb(*value, REQ_MB5_I2C_VAL); + + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); + if (!wait_for_completion_timeout(&mb5_transfer.work, + msecs_to_jiffies(500))) { + pr_err("prcmu: prcmu_abb_write timed out.\n"); + r = -EIO; + goto unlock_and_return; + } + r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); + +unlock_and_return: + mutex_unlock(&mb5_transfer.lock); + return r; +} +EXPORT_SYMBOL(prcmu_abb_write); + +static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp, + enum prcmu_cpu_opp cpu_opp) +{ + bool do_ape; + bool do_arm; + int err = 0; + + do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP)); + do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP)); + + mutex_lock(&mb1_transfer.lock); + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(0, MBOX_HEADER_REQ_MB0); + writeb(cpu_opp, REQ_MB1_ARMOPP); + writeb(ape_opp, REQ_MB1_APEOPP); + writeb(0, REQ_MB1_BOOSTOPP); + writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); + wait_for_completion(&mb1_transfer.work); + if ((do_ape) && (mb1_transfer.ack.ape_status != 0)) + err = -EIO; + if ((do_arm) && (mb1_transfer.ack.arm_status != 0)) + err = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return err; +} + +/** + * prcmu_set_ape_opp() - Set the OPP of the APE. + * @opp: The OPP to set. + * + * This function sets the OPP of the APE. + */ +int prcmu_set_ape_opp(enum prcmu_ape_opp opp) +{ + return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE); +} +EXPORT_SYMBOL(prcmu_set_ape_opp); + +/** + * prcmu_set_cpu_opp() - Set the OPP of the CPU. + * @opp: The OPP to set. + * + * This function sets the OPP of the CPU. + */ +int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp) +{ + return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp); +} +EXPORT_SYMBOL(prcmu_set_cpu_opp); + +/** + * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU. + * @ape_opp: The APE OPP to set. + * @cpu_opp: The CPU OPP to set. + * + * This function sets the OPPs of the APE and the CPU. + */ +int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, + enum prcmu_cpu_opp cpu_opp) +{ + return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp); +} +EXPORT_SYMBOL(prcmu_set_ape_cpu_opps); + +/** + * prcmu_get_ape_opp() - Get the OPP of the APE. + * + * This function gets the OPP of the APE. + */ +enum prcmu_ape_opp prcmu_get_ape_opp(void) +{ + return readb(ACK_MB1_CURR_APEOPP); +} +EXPORT_SYMBOL(prcmu_get_ape_opp); + +/** + * prcmu_get_cpu_opp() - Get the OPP of the CPU. + * + * This function gets the OPP of the CPU. The OPP is specified in %%. + * PRCMU_OPP_EXT is a special OPP value, not specified in %%. + */ +int prcmu_get_cpu_opp(void) +{ + return readb(ACK_MB1_CURR_ARMOPP); +} +EXPORT_SYMBOL(prcmu_get_cpu_opp); + +bool prcmu_has_arm_maxopp(void) +{ + return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK) + == PRCM_AVS_ISMODEENABLE_MASK; +} + +static void read_mailbox_0(void) +{ + writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_1(void) +{ + mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP); + mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP); + complete(&mb1_transfer.work); + writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_2(void) +{ + writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_3(void) +{ + writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_4(void) +{ + writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_5(void) +{ + mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS); + mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL); + complete(&mb5_transfer.work); + writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_6(void) +{ + writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_7(void) +{ + writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR); +} + +static void (* const read_mailbox[NUM_MBOX])(void) = { + read_mailbox_0, + read_mailbox_1, + read_mailbox_2, + read_mailbox_3, + read_mailbox_4, + read_mailbox_5, + read_mailbox_6, + read_mailbox_7 +}; + +static irqreturn_t prcmu_irq_handler(int irq, void *data) +{ + u32 bits; + u8 n; + + bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1)); + if (unlikely(!bits)) + return IRQ_NONE; + + for (n = 0; bits; n++) { + if (bits & MBOX_BIT(n)) { + bits -= MBOX_BIT(n); + read_mailbox[n](); + } + } + return IRQ_HANDLED; +} + +void __init prcmu_early_init(void) +{ + if (cpu_is_u8500v11() || cpu_is_u8500ed()) { + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1); + } else if (cpu_is_u8500v2()) { + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE); + } else { + pr_err("prcmu: Unsupported chip version\n"); + BUG(); + } +} + +static int __init prcmu_init(void) +{ + if (cpu_is_u8500ed()) { + pr_err("prcmu: Unsupported chip version\n"); + return 0; + } + + mutex_init(&mb1_transfer.lock); + init_completion(&mb1_transfer.work); + mutex_init(&mb5_transfer.lock); + init_completion(&mb5_transfer.work); + + /* Clean up the mailbox interrupts after pre-kernel code. */ + writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR); + + return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0, + "prcmu", NULL); +} + +arch_initcall(prcmu_init); diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h new file mode 100644 index 000000000000..d591d79aa6f0 --- /dev/null +++ b/include/linux/mfd/db8500-prcmu.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Sundar Iyer + * Author: Martin Persson + * + * License Terms: GNU General Public License v2 + * + * PRCM Unit definitions + */ + +#ifndef __MACH_PRCMU_DEFS_H +#define __MACH_PRCMU_DEFS_H + +enum prcmu_cpu_opp { + CPU_OPP_INIT = 0x00, + CPU_OPP_NO_CHANGE = 0x01, + CPU_OPP_100 = 0x02, + CPU_OPP_50 = 0x03, + CPU_OPP_MAX = 0x04, + CPU_OPP_EXT_CLK = 0x07 +}; +enum prcmu_ape_opp { + APE_OPP_NO_CHANGE = 0x00, + APE_OPP_100 = 0x02, + APE_OPP_50 = 0x03, +}; + +#endif /* __MACH_PRCMU_DEFS_H */ + +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Kumar Sanghvi + * Author: Sundar Iyer + * Author: Mattias Nilsson + * + * License Terms: GNU General Public License v2 + * + * PRCM Unit f/w API + */ +#ifndef __MACH_PRCMU_H +#define __MACH_PRCMU_H + +void __init prcmu_early_init(void); +int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); +int prcmu_set_ape_opp(enum prcmu_ape_opp opp); +int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp); +int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, + enum prcmu_cpu_opp cpu_opp); +enum prcmu_ape_opp prcmu_get_ape_opp(void); +int prcmu_get_cpu_opp(void); +bool prcmu_has_arm_maxopp(void); + +#endif /* __MACH_PRCMU_H */ -- cgit v1.2.3 From 3df57bcf5a6ba74572218a811bd0e311414f2aff Mon Sep 17 00:00:00 2001 From: Mattias Nilsson Date: Mon, 16 May 2011 00:15:05 +0200 Subject: mfd: update DB8500 PRCMU driver This updates the DB8500 PRCMU driver to the latest version available internally. Nominally we would update the dependent CPUfreq driver at the same time but since that is being moved around in this patch set we postpone that by simply deactivating it for the time being. This is a snapshot of the current PRCMU firmware API as it looks right now. The PRCMU firmware is still subject to change. This also updates the CPUfreq driver to a newer version that will utilize the new API. Acked-by: Samuel Ortiz Signed-off-by: Mattias Nilsson Signed-off-by: Martin Persson Signed-off-by: Per Fransson Signed-off-by: Jonas Aaberg Signed-off-by: Sebastien Rault Signed-off-by: Bengt Jonsson Signed-off-by: Rickard Andersson Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Makefile | 2 +- arch/arm/mach-ux500/cpu-db8500.c | 5 + drivers/mfd/db8500-prcmu-regs.h | 194 ++-- drivers/mfd/db8500-prcmu.c | 1879 ++++++++++++++++++++++++++++++++++---- include/linux/mfd/db8500-prcmu.h | 992 +++++++++++++++++++- 5 files changed, 2782 insertions(+), 290 deletions(-) (limited to 'arch/arm/mach-ux500') diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 7a1d43e04f97..1694916e6822 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -17,4 +17,4 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o + diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 3d419fef0470..c3c417656bd9 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -131,9 +131,14 @@ static struct platform_device db8500_pmu_device = { .dev.platform_data = &db8500_pmu_platdata, }; +static struct platform_device db8500_prcmu_device = { + .name = "db8500-prcmu", +}; + static struct platform_device *platform_devs[] __initdata = { &u8500_dma40_device, &db8500_pmu_device, + &db8500_prcmu_device, }; static resource_size_t __initdata db8500_gpio_base[] = { diff --git a/drivers/mfd/db8500-prcmu-regs.h b/drivers/mfd/db8500-prcmu-regs.h index c1226da19bfb..3bbf04d58043 100644 --- a/drivers/mfd/db8500-prcmu-regs.h +++ b/drivers/mfd/db8500-prcmu-regs.h @@ -9,86 +9,158 @@ * * PRCM Unit registers */ +#ifndef __DB8500_PRCMU_REGS_H +#define __DB8500_PRCMU_REGS_H -#ifndef __MACH_PRCMU_REGS_H -#define __MACH_PRCMU_REGS_H - +#include #include -#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) -#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) -#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) -#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0) -#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4) -#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0) -#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c) -#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308) +#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end)) + +#define PRCM_ARM_PLLDIVPS 0x118 +#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE BITS(0, 5) +#define PRCM_ARM_PLLDIVPS_MAX_MASK 0xF + +#define PRCM_PLLARM_LOCKP 0x0A8 +#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 BIT(1) + +#define PRCM_ARM_CHGCLKREQ 0x114 +#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0) + +#define PRCM_PLLARM_ENABLE 0x98 +#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE BIT(0) +#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON BIT(8) + +#define PRCM_ARMCLKFIX_MGT 0x0 +#define PRCM_A9_RESETN_CLR 0x1f4 +#define PRCM_A9_RESETN_SET 0x1f0 +#define PRCM_ARM_LS_CLAMP 0x30C +#define PRCM_SRAM_A9 0x308 /* ARM WFI Standby signal register */ -#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) -#define PRCMU_IOCR (_PRCMU_BASE + 0x310) +#define PRCM_ARM_WFI_STANDBY 0x130 +#define PRCM_IOCR 0x310 +#define PRCM_IOCR_IOFORCE BIT(0) /* CPU mailbox registers */ -#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc) -#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100) -#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104) +#define PRCM_MBOX_CPU_VAL 0x0FC +#define PRCM_MBOX_CPU_SET 0x100 /* Dual A9 core interrupt management unit registers */ -#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328) -#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c) -#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c) -#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120) -#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124) -#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128) -#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C) -#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260) -#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264) -#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268) -#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C) - -#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334) -#define ARM_WAKEUP_MODEM 0x1 - -#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C) -#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494) -#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174) - -#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148) -#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150) -#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158) -#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160) -#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168) -#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484) -#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488) -#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018) +#define PRCM_A9_MASK_REQ 0x328 +#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ BIT(0) + +#define PRCM_A9_MASK_ACK 0x32C +#define PRCM_ARMITMSK31TO0 0x11C +#define PRCM_ARMITMSK63TO32 0x120 +#define PRCM_ARMITMSK95TO64 0x124 +#define PRCM_ARMITMSK127TO96 0x128 +#define PRCM_POWER_STATE_VAL 0x25C +#define PRCM_ARMITVAL31TO0 0x260 +#define PRCM_ARMITVAL63TO32 0x264 +#define PRCM_ARMITVAL95TO64 0x268 +#define PRCM_ARMITVAL127TO96 0x26C + +#define PRCM_HOSTACCESS_REQ 0x334 +#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ BIT(0) + +#define PRCM_ARM_IT1_CLR 0x48C +#define PRCM_ARM_IT1_VAL 0x494 + +#define PRCM_ITSTATUS0 0x148 +#define PRCM_ITSTATUS1 0x150 +#define PRCM_ITSTATUS2 0x158 +#define PRCM_ITSTATUS3 0x160 +#define PRCM_ITSTATUS4 0x168 +#define PRCM_ITSTATUS5 0x484 +#define PRCM_ITCLEAR5 0x488 +#define PRCM_ARMIT_MASKXP70_IT 0x1018 /* System reset register */ -#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228) +#define PRCM_APE_SOFTRST 0x228 /* Level shifter and clamp control registers */ -#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) -#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) +#define PRCM_MMIP_LS_CLAMP_SET 0x420 +#define PRCM_MMIP_LS_CLAMP_CLR 0x424 + +/* PRCMU HW semaphore */ +#define PRCM_SEM 0x400 +#define PRCM_SEM_PRCM_SEM BIT(0) /* PRCMU clock/PLL/reset registers */ -#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) -#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) -#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044) -#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064) -#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058) -#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c) -#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) -#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) -#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) -#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) +#define PRCM_PLLDSI_FREQ 0x500 +#define PRCM_PLLDSI_ENABLE 0x504 +#define PRCM_PLLDSI_LOCKP 0x508 +#define PRCM_DSI_PLLOUT_SEL 0x530 +#define PRCM_DSITVCLK_DIV 0x52C +#define PRCM_APE_RESETN_SET 0x1E4 +#define PRCM_APE_RESETN_CLR 0x1E8 + +#define PRCM_TCR 0x1C8 +#define PRCM_TCR_TENSEL_MASK BITS(0, 7) +#define PRCM_TCR_STOP_TIMERS BIT(16) +#define PRCM_TCR_DOZE_MODE BIT(17) + +#define PRCM_CLKOCR 0x1CC +#define PRCM_CLKOCR_CLKODIV0_SHIFT 0 +#define PRCM_CLKOCR_CLKODIV0_MASK BITS(0, 5) +#define PRCM_CLKOCR_CLKOSEL0_SHIFT 6 +#define PRCM_CLKOCR_CLKOSEL0_MASK BITS(6, 8) +#define PRCM_CLKOCR_CLKODIV1_SHIFT 16 +#define PRCM_CLKOCR_CLKODIV1_MASK BITS(16, 21) +#define PRCM_CLKOCR_CLKOSEL1_SHIFT 22 +#define PRCM_CLKOCR_CLKOSEL1_MASK BITS(22, 24) +#define PRCM_CLKOCR_CLK1TYPE BIT(28) + +#define PRCM_SGACLK_MGT 0x014 +#define PRCM_UARTCLK_MGT 0x018 +#define PRCM_MSP02CLK_MGT 0x01C +#define PRCM_MSP1CLK_MGT 0x288 +#define PRCM_I2CCLK_MGT 0x020 +#define PRCM_SDMMCCLK_MGT 0x024 +#define PRCM_SLIMCLK_MGT 0x028 +#define PRCM_PER1CLK_MGT 0x02C +#define PRCM_PER2CLK_MGT 0x030 +#define PRCM_PER3CLK_MGT 0x034 +#define PRCM_PER5CLK_MGT 0x038 +#define PRCM_PER6CLK_MGT 0x03C +#define PRCM_PER7CLK_MGT 0x040 +#define PRCM_LCDCLK_MGT 0x044 +#define PRCM_BMLCLK_MGT 0x04C +#define PRCM_HSITXCLK_MGT 0x050 +#define PRCM_HSIRXCLK_MGT 0x054 +#define PRCM_HDMICLK_MGT 0x058 +#define PRCM_APEATCLK_MGT 0x05C +#define PRCM_APETRACECLK_MGT 0x060 +#define PRCM_MCDECLK_MGT 0x064 +#define PRCM_IPI2CCLK_MGT 0x068 +#define PRCM_DSIALTCLK_MGT 0x06C +#define PRCM_DMACLK_MGT 0x074 +#define PRCM_B2R2CLK_MGT 0x078 +#define PRCM_TVCLK_MGT 0x07C +#define PRCM_UNIPROCLK_MGT 0x278 +#define PRCM_SSPCLK_MGT 0x280 +#define PRCM_RNGCLK_MGT 0x284 +#define PRCM_UICCCLK_MGT 0x27C + +#define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4) +#define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7) +#define PRCM_CLK_MGT_CLKEN BIT(8) /* ePOD and memory power signal control registers */ -#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410) -#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304) +#define PRCM_EPOD_C_SET 0x410 +#define PRCM_SRAM_LS_SLEEP 0x304 /* Debug power control unit registers */ -#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254) +#define PRCM_POWER_STATE_SET 0x254 /* Miscellaneous unit registers */ -#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) +#define PRCM_DSI_SW_RESET 0x324 +#define PRCM_GPIOCR 0x138 + +/* GPIOCR register */ +#define PRCM_GPIOCR_SPI2_SELECT BIT(23) + +#define PRCM_DDR_SUBSYS_APE_MINBW 0x438 -#endif /* __MACH_PRCMU_REGS_H */ +#endif /* __DB8500_PRCMU_REGS_H */ diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 31f18c8c6bf8..c44725bd8b9a 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -10,93 +10,1354 @@ * U8500 PRCM Unit interface driver * */ -#include #include +#include +#include #include #include +#include #include +#include #include #include +#include #include #include -#include +#include +#include +#include +#include #include +#include +#include +#include +#include +#include "db8500-prcmu-regs.h" + +/* Offset for the firmware version within the TCPM */ +#define PRCMU_FW_VERSION_OFFSET 0xA4 + +/* PRCMU project numbers, defined by PRCMU FW */ +#define PRCMU_PROJECT_ID_8500V1_0 1 +#define PRCMU_PROJECT_ID_8500V2_0 2 +#define PRCMU_PROJECT_ID_8400V2_0 3 + +/* Index of different voltages to be used when accessing AVSData */ +#define PRCM_AVS_BASE 0x2FC +#define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0) +#define PRCM_AVS_VBB_MAX_OPP (PRCM_AVS_BASE + 0x1) +#define PRCM_AVS_VBB_100_OPP (PRCM_AVS_BASE + 0x2) +#define PRCM_AVS_VBB_50_OPP (PRCM_AVS_BASE + 0x3) +#define PRCM_AVS_VARM_MAX_OPP (PRCM_AVS_BASE + 0x4) +#define PRCM_AVS_VARM_100_OPP (PRCM_AVS_BASE + 0x5) +#define PRCM_AVS_VARM_50_OPP (PRCM_AVS_BASE + 0x6) +#define PRCM_AVS_VARM_RET (PRCM_AVS_BASE + 0x7) +#define PRCM_AVS_VAPE_100_OPP (PRCM_AVS_BASE + 0x8) +#define PRCM_AVS_VAPE_50_OPP (PRCM_AVS_BASE + 0x9) +#define PRCM_AVS_VMOD_100_OPP (PRCM_AVS_BASE + 0xA) +#define PRCM_AVS_VMOD_50_OPP (PRCM_AVS_BASE + 0xB) +#define PRCM_AVS_VSAFE (PRCM_AVS_BASE + 0xC) + +#define PRCM_AVS_VOLTAGE 0 +#define PRCM_AVS_VOLTAGE_MASK 0x3f +#define PRCM_AVS_ISSLOWSTARTUP 6 +#define PRCM_AVS_ISSLOWSTARTUP_MASK (1 << PRCM_AVS_ISSLOWSTARTUP) +#define PRCM_AVS_ISMODEENABLE 7 +#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE) + +#define PRCM_BOOT_STATUS 0xFFF +#define PRCM_ROMCODE_A2P 0xFFE +#define PRCM_ROMCODE_P2A 0xFFD +#define PRCM_XP70_CUR_PWR_STATE 0xFFC /* 4 BYTES */ + +#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */ + +#define _PRCM_MBOX_HEADER 0xFE8 /* 16 bytes */ +#define PRCM_MBOX_HEADER_REQ_MB0 (_PRCM_MBOX_HEADER + 0x0) +#define PRCM_MBOX_HEADER_REQ_MB1 (_PRCM_MBOX_HEADER + 0x1) +#define PRCM_MBOX_HEADER_REQ_MB2 (_PRCM_MBOX_HEADER + 0x2) +#define PRCM_MBOX_HEADER_REQ_MB3 (_PRCM_MBOX_HEADER + 0x3) +#define PRCM_MBOX_HEADER_REQ_MB4 (_PRCM_MBOX_HEADER + 0x4) +#define PRCM_MBOX_HEADER_REQ_MB5 (_PRCM_MBOX_HEADER + 0x5) +#define PRCM_MBOX_HEADER_ACK_MB0 (_PRCM_MBOX_HEADER + 0x8) + +/* Req Mailboxes */ +#define PRCM_REQ_MB0 0xFDC /* 12 bytes */ +#define PRCM_REQ_MB1 0xFD0 /* 12 bytes */ +#define PRCM_REQ_MB2 0xFC0 /* 16 bytes */ +#define PRCM_REQ_MB3 0xE4C /* 372 bytes */ +#define PRCM_REQ_MB4 0xE48 /* 4 bytes */ +#define PRCM_REQ_MB5 0xE44 /* 4 bytes */ + +/* Ack Mailboxes */ +#define PRCM_ACK_MB0 0xE08 /* 52 bytes */ +#define PRCM_ACK_MB1 0xE04 /* 4 bytes */ +#define PRCM_ACK_MB2 0xE00 /* 4 bytes */ +#define PRCM_ACK_MB3 0xDFC /* 4 bytes */ +#define PRCM_ACK_MB4 0xDF8 /* 4 bytes */ +#define PRCM_ACK_MB5 0xDF4 /* 4 bytes */ + +/* Mailbox 0 headers */ +#define MB0H_POWER_STATE_TRANS 0 +#define MB0H_CONFIG_WAKEUPS_EXE 1 +#define MB0H_READ_WAKEUP_ACK 3 +#define MB0H_CONFIG_WAKEUPS_SLEEP 4 + +#define MB0H_WAKEUP_EXE 2 +#define MB0H_WAKEUP_SLEEP 5 + +/* Mailbox 0 REQs */ +#define PRCM_REQ_MB0_AP_POWER_STATE (PRCM_REQ_MB0 + 0x0) +#define PRCM_REQ_MB0_AP_PLL_STATE (PRCM_REQ_MB0 + 0x1) +#define PRCM_REQ_MB0_ULP_CLOCK_STATE (PRCM_REQ_MB0 + 0x2) +#define PRCM_REQ_MB0_DO_NOT_WFI (PRCM_REQ_MB0 + 0x3) +#define PRCM_REQ_MB0_WAKEUP_8500 (PRCM_REQ_MB0 + 0x4) +#define PRCM_REQ_MB0_WAKEUP_4500 (PRCM_REQ_MB0 + 0x8) + +/* Mailbox 0 ACKs */ +#define PRCM_ACK_MB0_AP_PWRSTTR_STATUS (PRCM_ACK_MB0 + 0x0) +#define PRCM_ACK_MB0_READ_POINTER (PRCM_ACK_MB0 + 0x1) +#define PRCM_ACK_MB0_WAKEUP_0_8500 (PRCM_ACK_MB0 + 0x4) +#define PRCM_ACK_MB0_WAKEUP_0_4500 (PRCM_ACK_MB0 + 0x8) +#define PRCM_ACK_MB0_WAKEUP_1_8500 (PRCM_ACK_MB0 + 0x1C) +#define PRCM_ACK_MB0_WAKEUP_1_4500 (PRCM_ACK_MB0 + 0x20) +#define PRCM_ACK_MB0_EVENT_4500_NUMBERS 20 + +/* Mailbox 1 headers */ +#define MB1H_ARM_APE_OPP 0x0 +#define MB1H_RESET_MODEM 0x2 +#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3 +#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4 +#define MB1H_RELEASE_USB_WAKEUP 0x5 + +/* Mailbox 1 Requests */ +#define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0) +#define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1) +#define PRCM_REQ_MB1_APE_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x4) +#define PRCM_REQ_MB1_ARM_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x8) + +/* Mailbox 1 ACKs */ +#define PRCM_ACK_MB1_CURRENT_ARM_OPP (PRCM_ACK_MB1 + 0x0) +#define PRCM_ACK_MB1_CURRENT_APE_OPP (PRCM_ACK_MB1 + 0x1) +#define PRCM_ACK_MB1_APE_VOLTAGE_STATUS (PRCM_ACK_MB1 + 0x2) +#define PRCM_ACK_MB1_DVFS_STATUS (PRCM_ACK_MB1 + 0x3) + +/* Mailbox 2 headers */ +#define MB2H_DPS 0x0 +#define MB2H_AUTO_PWR 0x1 + +/* Mailbox 2 REQs */ +#define PRCM_REQ_MB2_SVA_MMDSP (PRCM_REQ_MB2 + 0x0) +#define PRCM_REQ_MB2_SVA_PIPE (PRCM_REQ_MB2 + 0x1) +#define PRCM_REQ_MB2_SIA_MMDSP (PRCM_REQ_MB2 + 0x2) +#define PRCM_REQ_MB2_SIA_PIPE (PRCM_REQ_MB2 + 0x3) +#define PRCM_REQ_MB2_SGA (PRCM_REQ_MB2 + 0x4) +#define PRCM_REQ_MB2_B2R2_MCDE (PRCM_REQ_MB2 + 0x5) +#define PRCM_REQ_MB2_ESRAM12 (PRCM_REQ_MB2 + 0x6) +#define PRCM_REQ_MB2_ESRAM34 (PRCM_REQ_MB2 + 0x7) +#define PRCM_REQ_MB2_AUTO_PM_SLEEP (PRCM_REQ_MB2 + 0x8) +#define PRCM_REQ_MB2_AUTO_PM_IDLE (PRCM_REQ_MB2 + 0xC) + +/* Mailbox 2 ACKs */ +#define PRCM_ACK_MB2_DPS_STATUS (PRCM_ACK_MB2 + 0x0) +#define HWACC_PWR_ST_OK 0xFE + +/* Mailbox 3 headers */ +#define MB3H_ANC 0x0 +#define MB3H_SIDETONE 0x1 +#define MB3H_SYSCLK 0xE + +/* Mailbox 3 Requests */ +#define PRCM_REQ_MB3_ANC_FIR_COEFF (PRCM_REQ_MB3 + 0x0) +#define PRCM_REQ_MB3_ANC_IIR_COEFF (PRCM_REQ_MB3 + 0x20) +#define PRCM_REQ_MB3_ANC_SHIFTER (PRCM_REQ_MB3 + 0x60) +#define PRCM_REQ_MB3_ANC_WARP (PRCM_REQ_MB3 + 0x64) +#define PRCM_REQ_MB3_SIDETONE_FIR_GAIN (PRCM_REQ_MB3 + 0x68) +#define PRCM_REQ_MB3_SIDETONE_FIR_COEFF (PRCM_REQ_MB3 + 0x6C) +#define PRCM_REQ_MB3_SYSCLK_MGT (PRCM_REQ_MB3 + 0x16C) + +/* Mailbox 4 headers */ +#define MB4H_DDR_INIT 0x0 +#define MB4H_MEM_ST 0x1 +#define MB4H_HOTDOG 0x12 +#define MB4H_HOTMON 0x13 +#define MB4H_HOT_PERIOD 0x14 + +/* Mailbox 4 Requests */ +#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE (PRCM_REQ_MB4 + 0x0) +#define PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE (PRCM_REQ_MB4 + 0x1) +#define PRCM_REQ_MB4_ESRAM0_ST (PRCM_REQ_MB4 + 0x3) +#define PRCM_REQ_MB4_HOTDOG_THRESHOLD (PRCM_REQ_MB4 + 0x0) +#define PRCM_REQ_MB4_HOTMON_LOW (PRCM_REQ_MB4 + 0x0) +#define PRCM_REQ_MB4_HOTMON_HIGH (PRCM_REQ_MB4 + 0x1) +#define PRCM_REQ_MB4_HOTMON_CONFIG (PRCM_REQ_MB4 + 0x2) +#define PRCM_REQ_MB4_HOT_PERIOD (PRCM_REQ_MB4 + 0x0) +#define HOTMON_CONFIG_LOW BIT(0) +#define HOTMON_CONFIG_HIGH BIT(1) + +/* Mailbox 5 Requests */ +#define PRCM_REQ_MB5_I2C_SLAVE_OP (PRCM_REQ_MB5 + 0x0) +#define PRCM_REQ_MB5_I2C_HW_BITS (PRCM_REQ_MB5 + 0x1) +#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 0x2) +#define PRCM_REQ_MB5_I2C_VAL (PRCM_REQ_MB5 + 0x3) +#define PRCMU_I2C_WRITE(slave) \ + (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) +#define PRCMU_I2C_READ(slave) \ + (((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0)) +#define PRCMU_I2C_STOP_EN BIT(3) + +/* Mailbox 5 ACKs */ +#define PRCM_ACK_MB5_I2C_STATUS (PRCM_ACK_MB5 + 0x1) +#define PRCM_ACK_MB5_I2C_VAL (PRCM_ACK_MB5 + 0x3) +#define I2C_WR_OK 0x1 +#define I2C_RD_OK 0x2 + +#define NUM_MB 8 +#define MBOX_BIT BIT +#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1) + +/* + * Wakeups/IRQs + */ + +#define WAKEUP_BIT_RTC BIT(0) +#define WAKEUP_BIT_RTT0 BIT(1) +#define WAKEUP_BIT_RTT1 BIT(2) +#define WAKEUP_BIT_HSI0 BIT(3) +#define WAKEUP_BIT_HSI1 BIT(4) +#define WAKEUP_BIT_CA_WAKE BIT(5) +#define WAKEUP_BIT_USB BIT(6) +#define WAKEUP_BIT_ABB BIT(7) +#define WAKEUP_BIT_ABB_FIFO BIT(8) +#define WAKEUP_BIT_SYSCLK_OK BIT(9) +#define WAKEUP_BIT_CA_SLEEP BIT(10) +#define WAKEUP_BIT_AC_WAKE_ACK BIT(11) +#define WAKEUP_BIT_SIDE_TONE_OK BIT(12) +#define WAKEUP_BIT_ANC_OK BIT(13) +#define WAKEUP_BIT_SW_ERROR BIT(14) +#define WAKEUP_BIT_AC_SLEEP_ACK BIT(15) +#define WAKEUP_BIT_ARM BIT(17) +#define WAKEUP_BIT_HOTMON_LOW BIT(18) +#define WAKEUP_BIT_HOTMON_HIGH BIT(19) +#define WAKEUP_BIT_MODEM_SW_RESET_REQ BIT(20) +#define WAKEUP_BIT_GPIO0 BIT(23) +#define WAKEUP_BIT_GPIO1 BIT(24) +#define WAKEUP_BIT_GPIO2 BIT(25) +#define WAKEUP_BIT_GPIO3 BIT(26) +#define WAKEUP_BIT_GPIO4 BIT(27) +#define WAKEUP_BIT_GPIO5 BIT(28) +#define WAKEUP_BIT_GPIO6 BIT(29) +#define WAKEUP_BIT_GPIO7 BIT(30) +#define WAKEUP_BIT_GPIO8 BIT(31) + +/* + * This vector maps irq numbers to the bits in the bit field used in + * communication with the PRCMU firmware. + * + * The reason for having this is to keep the irq numbers contiguous even though + * the bits in the bit field are not. (The bits also have a tendency to move + * around, to further complicate matters.) + */ +#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name) - IRQ_PRCMU_BASE) +#define IRQ_ENTRY(_name)[IRQ_INDEX(_name)] = (WAKEUP_BIT_##_name) +static u32 prcmu_irq_bit[NUM_PRCMU_WAKEUPS] = { + IRQ_ENTRY(RTC), + IRQ_ENTRY(RTT0), + IRQ_ENTRY(RTT1), + IRQ_ENTRY(HSI0), + IRQ_ENTRY(HSI1), + IRQ_ENTRY(CA_WAKE), + IRQ_ENTRY(USB), + IRQ_ENTRY(ABB), + IRQ_ENTRY(ABB_FIFO), + IRQ_ENTRY(CA_SLEEP), + IRQ_ENTRY(ARM), + IRQ_ENTRY(HOTMON_LOW), + IRQ_ENTRY(HOTMON_HIGH), + IRQ_ENTRY(MODEM_SW_RESET_REQ), + IRQ_ENTRY(GPIO0), + IRQ_ENTRY(GPIO1), + IRQ_ENTRY(GPIO2), + IRQ_ENTRY(GPIO3), + IRQ_ENTRY(GPIO4), + IRQ_ENTRY(GPIO5), + IRQ_ENTRY(GPIO6), + IRQ_ENTRY(GPIO7), + IRQ_ENTRY(GPIO8) +}; + +#define VALID_WAKEUPS (BIT(NUM_PRCMU_WAKEUP_INDICES) - 1) +#define WAKEUP_ENTRY(_name)[PRCMU_WAKEUP_INDEX_##_name] = (WAKEUP_BIT_##_name) +static u32 prcmu_wakeup_bit[NUM_PRCMU_WAKEUP_INDICES] = { + WAKEUP_ENTRY(RTC), + WAKEUP_ENTRY(RTT0), + WAKEUP_ENTRY(RTT1), + WAKEUP_ENTRY(HSI0), + WAKEUP_ENTRY(HSI1), + WAKEUP_ENTRY(USB), + WAKEUP_ENTRY(ABB), + WAKEUP_ENTRY(ABB_FIFO), + WAKEUP_ENTRY(ARM) +}; + +/* + * mb0_transfer - state needed for mailbox 0 communication. + * @lock: The transaction lock. + * @dbb_events_lock: A lock used to handle concurrent access to (parts of) + * the request data. + * @mask_work: Work structure used for (un)masking wakeup interrupts. + * @req: Request data that need to persist between requests. + */ +static struct { + spinlock_t lock; + spinlock_t dbb_irqs_lock; + struct work_struct mask_work; + struct mutex ac_wake_lock; + struct completion ac_wake_work; + struct { + u32 dbb_irqs; + u32 dbb_wakeups; + u32 abb_events; + } req; +} mb0_transfer; + +/* + * mb1_transfer - state needed for mailbox 1 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + * @ack: Reply ("acknowledge") data. + */ +static struct { + struct mutex lock; + struct completion work; + struct { + u8 header; + u8 arm_opp; + u8 ape_opp; + u8 ape_voltage_status; + } ack; +} mb1_transfer; + +/* + * mb2_transfer - state needed for mailbox 2 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + * @auto_pm_lock: The autonomous power management configuration lock. + * @auto_pm_enabled: A flag indicating whether autonomous PM is enabled. + * @req: Request data that need to persist between requests. + * @ack: Reply ("acknowledge") data. + */ +static struct { + struct mutex lock; + struct completion work; + spinlock_t auto_pm_lock; + bool auto_pm_enabled; + struct { + u8 status; + } ack; +} mb2_transfer; + +/* + * mb3_transfer - state needed for mailbox 3 communication. + * @lock: The request lock. + * @sysclk_lock: A lock used to handle concurrent sysclk requests. + * @sysclk_work: Work structure used for sysclk requests. + */ +static struct { + spinlock_t lock; + struct mutex sysclk_lock; + struct completion sysclk_work; +} mb3_transfer; + +/* + * mb4_transfer - state needed for mailbox 4 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + */ +static struct { + struct mutex lock; + struct completion work; +} mb4_transfer; + +/* + * mb5_transfer - state needed for mailbox 5 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + * @ack: Reply ("acknowledge") data. + */ +static struct { + struct mutex lock; + struct completion work; + struct { + u8 status; + u8 value; + } ack; +} mb5_transfer; + +static atomic_t ac_wake_req_state = ATOMIC_INIT(0); + +/* Spinlocks */ +static DEFINE_SPINLOCK(clkout_lock); +static DEFINE_SPINLOCK(gpiocr_lock); + +/* Global var to runtime determine TCDM base for v2 or v1 */ +static __iomem void *tcdm_base; + +struct clk_mgt { + unsigned int offset; + u32 pllsw; +}; + +static DEFINE_SPINLOCK(clk_mgt_lock); + +#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 } +struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { + CLK_MGT_ENTRY(SGACLK), + CLK_MGT_ENTRY(UARTCLK), + CLK_MGT_ENTRY(MSP02CLK), + CLK_MGT_ENTRY(MSP1CLK), + CLK_MGT_ENTRY(I2CCLK), + CLK_MGT_ENTRY(SDMMCCLK), + CLK_MGT_ENTRY(SLIMCLK), + CLK_MGT_ENTRY(PER1CLK), + CLK_MGT_ENTRY(PER2CLK), + CLK_MGT_ENTRY(PER3CLK), + CLK_MGT_ENTRY(PER5CLK), + CLK_MGT_ENTRY(PER6CLK), + CLK_MGT_ENTRY(PER7CLK), + CLK_MGT_ENTRY(LCDCLK), + CLK_MGT_ENTRY(BMLCLK), + CLK_MGT_ENTRY(HSITXCLK), + CLK_MGT_ENTRY(HSIRXCLK), + CLK_MGT_ENTRY(HDMICLK), + CLK_MGT_ENTRY(APEATCLK), + CLK_MGT_ENTRY(APETRACECLK), + CLK_MGT_ENTRY(MCDECLK), + CLK_MGT_ENTRY(IPI2CCLK), + CLK_MGT_ENTRY(DSIALTCLK), + CLK_MGT_ENTRY(DMACLK), + CLK_MGT_ENTRY(B2R2CLK), + CLK_MGT_ENTRY(TVCLK), + CLK_MGT_ENTRY(SSPCLK), + CLK_MGT_ENTRY(RNGCLK), + CLK_MGT_ENTRY(UICCCLK), +}; + +/* +* Used by MCDE to setup all necessary PRCMU registers +*/ +#define PRCMU_RESET_DSIPLL 0x00004000 +#define PRCMU_UNCLAMP_DSIPLL 0x00400800 + +#define PRCMU_CLK_PLL_DIV_SHIFT 0 +#define PRCMU_CLK_PLL_SW_SHIFT 5 +#define PRCMU_CLK_38 (1 << 9) +#define PRCMU_CLK_38_SRC (1 << 10) +#define PRCMU_CLK_38_DIV (1 << 11) + +/* PLLDIV=12, PLLSW=4 (PLLDDR) */ +#define PRCMU_DSI_CLOCK_SETTING 0x0000008C + +/* PLLDIV=8, PLLSW=4 (PLLDDR) */ +#define PRCMU_DSI_CLOCK_SETTING_U8400 0x00000088 + +/* DPI 50000000 Hz */ +#define PRCMU_DPI_CLOCK_SETTING ((1 << PRCMU_CLK_PLL_SW_SHIFT) | \ + (16 << PRCMU_CLK_PLL_DIV_SHIFT)) +#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000E00 + +/* D=101, N=1, R=4, SELDIV2=0 */ +#define PRCMU_PLLDSI_FREQ_SETTING 0x00040165 + +/* D=70, N=1, R=3, SELDIV2=0 */ +#define PRCMU_PLLDSI_FREQ_SETTING_U8400 0x00030146 + +#define PRCMU_ENABLE_PLLDSI 0x00000001 +#define PRCMU_DISABLE_PLLDSI 0x00000000 +#define PRCMU_RELEASE_RESET_DSS 0x0000400C +#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000202 +/* ESC clk, div0=1, div1=1, div2=3 */ +#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x07030101 +#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00030101 +#define PRCMU_DSI_RESET_SW 0x00000007 + +#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3 + +static struct { + u8 project_number; + u8 api_version; + u8 func_version; + u8 errata; +} prcmu_version; + + +int prcmu_enable_dsipll(void) +{ + int i; + unsigned int plldsifreq; + + /* Clear DSIPLL_RESETN */ + writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR)); + /* Unclamp DSIPLL in/out */ + writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR)); + + if (prcmu_is_u8400()) + plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400; + else + plldsifreq = PRCMU_PLLDSI_FREQ_SETTING; + /* Set DSI PLL FREQ */ + writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ)); + writel(PRCMU_DSI_PLLOUT_SEL_SETTING, + (_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL)); + /* Enable Escape clocks */ + writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, + (_PRCMU_BASE + PRCM_DSITVCLK_DIV)); + + /* Start DSI PLL */ + writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE)); + /* Reset DSI PLL */ + writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET)); + for (i = 0; i < 10; i++) { + if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) & + PRCMU_PLLDSI_LOCKP_LOCKED) + == PRCMU_PLLDSI_LOCKP_LOCKED) + break; + udelay(100); + } + /* Set DSIPLL_RESETN */ + writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET)); + return 0; +} + +int prcmu_disable_dsipll(void) +{ + /* Disable dsi pll */ + writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE)); + /* Disable escapeclock */ + writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, + (_PRCMU_BASE + PRCM_DSITVCLK_DIV)); + return 0; +} + +int prcmu_set_display_clocks(void) +{ + unsigned long flags; + unsigned int dsiclk; + + if (prcmu_is_u8400()) + dsiclk = PRCMU_DSI_CLOCK_SETTING_U8400; + else + dsiclk = PRCMU_DSI_CLOCK_SETTING; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT)); + writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT)); + writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT)); + + /* Release the HW semaphore. */ + writel(0, (_PRCMU_BASE + PRCM_SEM)); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); + + return 0; +} + +/** + * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1. + */ +void prcmu_enable_spi2(void) +{ + u32 reg; + unsigned long flags; + + spin_lock_irqsave(&gpiocr_lock, flags); + reg = readl(_PRCMU_BASE + PRCM_GPIOCR); + writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR); + spin_unlock_irqrestore(&gpiocr_lock, flags); +} + +/** + * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1. + */ +void prcmu_disable_spi2(void) +{ + u32 reg; + unsigned long flags; + + spin_lock_irqsave(&gpiocr_lock, flags); + reg = readl(_PRCMU_BASE + PRCM_GPIOCR); + writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR); + spin_unlock_irqrestore(&gpiocr_lock, flags); +} + +bool prcmu_has_arm_maxopp(void) +{ + return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) & + PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK; +} + +bool prcmu_is_u8400(void) +{ + return prcmu_version.project_number == PRCMU_PROJECT_ID_8400V2_0; +} + +/** + * prcmu_get_boot_status - PRCMU boot status checking + * Returns: the current PRCMU boot status + */ +int prcmu_get_boot_status(void) +{ + return readb(tcdm_base + PRCM_BOOT_STATUS); +} + +/** + * prcmu_set_rc_a2p - This function is used to run few power state sequences + * @val: Value to be set, i.e. transition requested + * Returns: 0 on success, -EINVAL on invalid argument + * + * This function is used to run the following power state sequences - + * any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep + */ +int prcmu_set_rc_a2p(enum romcode_write val) +{ + if (val < RDY_2_DS || val > RDY_2_XP70_RST) + return -EINVAL; + writeb(val, (tcdm_base + PRCM_ROMCODE_A2P)); + return 0; +} + +/** + * prcmu_get_rc_p2a - This function is used to get power state sequences + * Returns: the power transition that has last happened + * + * This function can return the following transitions- + * any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep + */ +enum romcode_read prcmu_get_rc_p2a(void) +{ + return readb(tcdm_base + PRCM_ROMCODE_P2A); +} + +/** + * prcmu_get_current_mode - Return the current XP70 power mode + * Returns: Returns the current AP(ARM) power mode: init, + * apBoot, apExecute, apDeepSleep, apSleep, apIdle, apReset + */ +enum ap_pwrst prcmu_get_xp70_current_state(void) +{ + return readb(tcdm_base + PRCM_XP70_CUR_PWR_STATE); +} + +/** + * prcmu_config_clkout - Configure one of the programmable clock outputs. + * @clkout: The CLKOUT number (0 or 1). + * @source: The clock to be used (one of the PRCMU_CLKSRC_*). + * @div: The divider to be applied. + * + * Configures one of the programmable clock outputs (CLKOUTs). + * @div should be in the range [1,63] to request a configuration, or 0 to + * inform that the configuration is no longer requested. + */ +int prcmu_config_clkout(u8 clkout, u8 source, u8 div) +{ + static int requests[2]; + int r = 0; + unsigned long flags; + u32 val; + u32 bits; + u32 mask; + u32 div_mask; + + BUG_ON(clkout > 1); + BUG_ON(div > 63); + BUG_ON((clkout == 0) && (source > PRCMU_CLKSRC_CLK009)); + + if (!div && !requests[clkout]) + return -EINVAL; + + switch (clkout) { + case 0: + div_mask = PRCM_CLKOCR_CLKODIV0_MASK; + mask = (PRCM_CLKOCR_CLKODIV0_MASK | PRCM_CLKOCR_CLKOSEL0_MASK); + bits = ((source << PRCM_CLKOCR_CLKOSEL0_SHIFT) | + (div << PRCM_CLKOCR_CLKODIV0_SHIFT)); + break; + case 1: + div_mask = PRCM_CLKOCR_CLKODIV1_MASK; + mask = (PRCM_CLKOCR_CLKODIV1_MASK | PRCM_CLKOCR_CLKOSEL1_MASK | + PRCM_CLKOCR_CLK1TYPE); + bits = ((source << PRCM_CLKOCR_CLKOSEL1_SHIFT) | + (div << PRCM_CLKOCR_CLKODIV1_SHIFT)); + break; + } + bits &= mask; + + spin_lock_irqsave(&clkout_lock, flags); + + val = readl(_PRCMU_BASE + PRCM_CLKOCR); + if (val & div_mask) { + if (div) { + if ((val & mask) != bits) { + r = -EBUSY; + goto unlock_and_return; + } + } else { + if ((val & mask & ~div_mask) != bits) { + r = -EINVAL; + goto unlock_and_return; + } + } + } + writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR)); + requests[clkout] += (div ? 1 : -1); + +unlock_and_return: + spin_unlock_irqrestore(&clkout_lock, flags); + + return r; +} + +int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) +{ + unsigned long flags; + + BUG_ON((state < PRCMU_AP_SLEEP) || (PRCMU_AP_DEEP_IDLE < state)); + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + cpu_relax(); + + writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0)); + writeb(state, (tcdm_base + PRCM_REQ_MB0_AP_POWER_STATE)); + writeb((keep_ap_pll ? 1 : 0), (tcdm_base + PRCM_REQ_MB0_AP_PLL_STATE)); + writeb((keep_ulp_clk ? 1 : 0), + (tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE)); + writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI)); + writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); + + return 0; +} + +/* This function should only be called while mb0_transfer.lock is held. */ +static void config_wakeups(void) +{ + const u8 header[2] = { + MB0H_CONFIG_WAKEUPS_EXE, + MB0H_CONFIG_WAKEUPS_SLEEP + }; + static u32 last_dbb_events; + static u32 last_abb_events; + u32 dbb_events; + u32 abb_events; + unsigned int i; + + dbb_events = mb0_transfer.req.dbb_irqs | mb0_transfer.req.dbb_wakeups; + dbb_events |= (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK); + + abb_events = mb0_transfer.req.abb_events; + + if ((dbb_events == last_dbb_events) && (abb_events == last_abb_events)) + return; + + for (i = 0; i < 2; i++) { + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + cpu_relax(); + writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500)); + writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500)); + writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0)); + writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + } + last_dbb_events = dbb_events; + last_abb_events = abb_events; +} + +void prcmu_enable_wakeups(u32 wakeups) +{ + unsigned long flags; + u32 bits; + int i; + + BUG_ON(wakeups != (wakeups & VALID_WAKEUPS)); + + for (i = 0, bits = 0; i < NUM_PRCMU_WAKEUP_INDICES; i++) { + if (wakeups & BIT(i)) + bits |= prcmu_wakeup_bit[i]; + } + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + mb0_transfer.req.dbb_wakeups = bits; + config_wakeups(); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); +} + +void prcmu_config_abb_event_readout(u32 abb_events) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + mb0_transfer.req.abb_events = abb_events; + config_wakeups(); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); +} + +void prcmu_get_abb_event_buffer(void __iomem **buf) +{ + if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1) + *buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500); + else + *buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_0_4500); +} + +/** + * prcmu_set_arm_opp - set the appropriate ARM OPP + * @opp: The new ARM operating point to which transition is to be made + * Returns: 0 on success, non-zero on failure + * + * This function sets the the operating point of the ARM. + */ +int prcmu_set_arm_opp(u8 opp) +{ + int r; + + if (opp < ARM_NO_CHANGE || opp > ARM_EXTCLK) + return -EINVAL; + + r = 0; + + mutex_lock(&mb1_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP)); + writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP)); + + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) || + (mb1_transfer.ack.arm_opp != opp)) + r = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return r; +} + +/** + * prcmu_get_arm_opp - get the current ARM OPP + * + * Returns: the current ARM OPP + */ +int prcmu_get_arm_opp(void) +{ + return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP); +} + +/** + * prcmu_get_ddr_opp - get the current DDR OPP + * + * Returns: the current DDR OPP + */ +int prcmu_get_ddr_opp(void) +{ + return readb(_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW); +} + +/** + * set_ddr_opp - set the appropriate DDR OPP + * @opp: The new DDR operating point to which transition is to be made + * Returns: 0 on success, non-zero on failure + * + * This function sets the operating point of the DDR. + */ +int prcmu_set_ddr_opp(u8 opp) +{ + if (opp < DDR_100_OPP || opp > DDR_25_OPP) + return -EINVAL; + /* Changing the DDR OPP can hang the hardware pre-v21 */ + if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20()) + writeb(opp, (_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW)); + + return 0; +} +/** + * set_ape_opp - set the appropriate APE OPP + * @opp: The new APE operating point to which transition is to be made + * Returns: 0 on success, non-zero on failure + * + * This function sets the operating point of the APE. + */ +int prcmu_set_ape_opp(u8 opp) +{ + int r = 0; + + mutex_lock(&mb1_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP)); + writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP)); + + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) || + (mb1_transfer.ack.ape_opp != opp)) + r = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return r; +} + +/** + * prcmu_get_ape_opp - get the current APE OPP + * + * Returns: the current APE OPP + */ +int prcmu_get_ape_opp(void) +{ + return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP); +} + +/** + * prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage + * @enable: true to request the higher voltage, false to drop a request. + * + * Calls to this function to enable and disable requests must be balanced. + */ +int prcmu_request_ape_opp_100_voltage(bool enable) +{ + int r = 0; + u8 header; + static unsigned int requests; + + mutex_lock(&mb1_transfer.lock); + + if (enable) { + if (0 != requests++) + goto unlock_and_return; + header = MB1H_REQUEST_APE_OPP_100_VOLT; + } else { + if (requests == 0) { + r = -EIO; + goto unlock_and_return; + } else if (1 != requests--) { + goto unlock_and_return; + } + header = MB1H_RELEASE_APE_OPP_100_VOLT; + } + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + if ((mb1_transfer.ack.header != header) || + ((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0)) + r = -EIO; + +unlock_and_return: + mutex_unlock(&mb1_transfer.lock); + + return r; +} + +/** + * prcmu_release_usb_wakeup_state - release the state required by a USB wakeup + * + * This function releases the power state requirements of a USB wakeup. + */ +int prcmu_release_usb_wakeup_state(void) +{ + int r = 0; + + mutex_lock(&mb1_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_RELEASE_USB_WAKEUP, + (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) || + ((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0)) + r = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return r; +} + +/** + * prcmu_set_epod - set the state of a EPOD (power domain) + * @epod_id: The EPOD to set + * @epod_state: The new EPOD state + * + * This function sets the state of a EPOD (power domain). It may not be called + * from interrupt context. + */ +int prcmu_set_epod(u16 epod_id, u8 epod_state) +{ + int r = 0; + bool ram_retention = false; + int i; + + /* check argument */ + BUG_ON(epod_id >= NUM_EPOD_ID); + + /* set flag if retention is possible */ + switch (epod_id) { + case EPOD_ID_SVAMMDSP: + case EPOD_ID_SIAMMDSP: + case EPOD_ID_ESRAM12: + case EPOD_ID_ESRAM34: + ram_retention = true; + break; + } + + /* check argument */ + BUG_ON(epod_state > EPOD_STATE_ON); + BUG_ON(epod_state == EPOD_STATE_RAMRET && !ram_retention); + + /* get lock */ + mutex_lock(&mb2_transfer.lock); + + /* wait for mailbox */ + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(2)) + cpu_relax(); + + /* fill in mailbox */ + for (i = 0; i < NUM_EPOD_ID; i++) + writeb(EPOD_STATE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB2 + i)); + writeb(epod_state, (tcdm_base + PRCM_REQ_MB2 + epod_id)); + + writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2)); + + writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + /* + * The current firmware version does not handle errors correctly, + * and we cannot recover if there is an error. + * This is expected to change when the firmware is updated. + */ + if (!wait_for_completion_timeout(&mb2_transfer.work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + r = -EIO; + goto unlock_and_return; + } + + if (mb2_transfer.ack.status != HWACC_PWR_ST_OK) + r = -EIO; + +unlock_and_return: + mutex_unlock(&mb2_transfer.lock); + return r; +} + +/** + * prcmu_configure_auto_pm - Configure autonomous power management. + * @sleep: Configuration for ApSleep. + * @idle: Configuration for ApIdle. + */ +void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, + struct prcmu_auto_pm_config *idle) +{ + u32 sleep_cfg; + u32 idle_cfg; + unsigned long flags; -#include + BUG_ON((sleep == NULL) || (idle == NULL)); -#include "db8500-prcmu-regs.h" + sleep_cfg = (sleep->sva_auto_pm_enable & 0xF); + sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_auto_pm_enable & 0xF)); + sleep_cfg = ((sleep_cfg << 8) | (sleep->sva_power_on & 0xFF)); + sleep_cfg = ((sleep_cfg << 8) | (sleep->sia_power_on & 0xFF)); + sleep_cfg = ((sleep_cfg << 4) | (sleep->sva_policy & 0xF)); + sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_policy & 0xF)); -/* Global var to runtime determine TCDM base for v2 or v1 */ -static __iomem void *tcdm_base; + idle_cfg = (idle->sva_auto_pm_enable & 0xF); + idle_cfg = ((idle_cfg << 4) | (idle->sia_auto_pm_enable & 0xF)); + idle_cfg = ((idle_cfg << 8) | (idle->sva_power_on & 0xFF)); + idle_cfg = ((idle_cfg << 8) | (idle->sia_power_on & 0xFF)); + idle_cfg = ((idle_cfg << 4) | (idle->sva_policy & 0xF)); + idle_cfg = ((idle_cfg << 4) | (idle->sia_policy & 0xF)); -#define _MBOX_HEADER (tcdm_base + 0xFE8) -#define MBOX_HEADER_REQ_MB0 (_MBOX_HEADER + 0x0) + spin_lock_irqsave(&mb2_transfer.auto_pm_lock, flags); -#define REQ_MB1 (tcdm_base + 0xFD0) -#define REQ_MB5 (tcdm_base + 0xE44) + /* + * The autonomous power management configuration is done through + * fields in mailbox 2, but these fields are only used as shared + * variables - i.e. there is no need to send a message. + */ + writel(sleep_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_SLEEP)); + writel(idle_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_IDLE)); -#define REQ_MB1_ARMOPP (REQ_MB1 + 0x0) -#define REQ_MB1_APEOPP (REQ_MB1 + 0x1) -#define REQ_MB1_BOOSTOPP (REQ_MB1 + 0x2) + mb2_transfer.auto_pm_enabled = + ((sleep->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) || + (sleep->sia_auto_pm_enable == PRCMU_AUTO_PM_ON) || + (idle->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) || + (idle->sia_auto_pm_enable == PRCMU_AUTO_PM_ON)); -#define ACK_MB1 (tcdm_base + 0xE04) -#define ACK_MB5 (tcdm_base + 0xDF4) + spin_unlock_irqrestore(&mb2_transfer.auto_pm_lock, flags); +} +EXPORT_SYMBOL(prcmu_configure_auto_pm); -#define ACK_MB1_CURR_ARMOPP (ACK_MB1 + 0x0) -#define ACK_MB1_CURR_APEOPP (ACK_MB1 + 0x1) +bool prcmu_is_auto_pm_enabled(void) +{ + return mb2_transfer.auto_pm_enabled; +} -#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5) -#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1) -#define REQ_MB5_I2C_REG (REQ_MB5 + 2) -#define REQ_MB5_I2C_VAL (REQ_MB5 + 3) +static int request_sysclk(bool enable) +{ + int r; + unsigned long flags; -#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1) -#define ACK_MB5_I2C_VAL (ACK_MB5 + 3) + r = 0; -#define PRCM_AVS_VARM_MAX_OPP (tcdm_base + 0x2E4) -#define PRCM_AVS_ISMODEENABLE 7 -#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE) + mutex_lock(&mb3_transfer.sysclk_lock); -#define I2C_WRITE(slave) \ - (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) -#define I2C_READ(slave) \ - (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0)) -#define I2C_STOP_EN BIT(3) - -enum mb1_h { - MB1H_ARM_OPP = 1, - MB1H_APE_OPP, - MB1H_ARM_APE_OPP, -}; + spin_lock_irqsave(&mb3_transfer.lock, flags); -static struct { - struct mutex lock; - struct completion work; - struct { - u8 arm_opp; - u8 ape_opp; - u8 arm_status; - u8 ape_status; - } ack; -} mb1_transfer; + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(3)) + cpu_relax(); -enum ack_mb5_status { - I2C_WR_OK = 0x01, - I2C_RD_OK = 0x02, -}; + writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT)); -#define MBOX_BIT BIT -#define NUM_MBOX 8 + writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3)); + writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); -static struct { - struct mutex lock; - struct completion work; - bool failed; - struct { - u8 status; - u8 value; - } ack; -} mb5_transfer; + spin_unlock_irqrestore(&mb3_transfer.lock, flags); + + /* + * The firmware only sends an ACK if we want to enable the + * SysClk, and it succeeds. + */ + if (enable && !wait_for_completion_timeout(&mb3_transfer.sysclk_work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + r = -EIO; + } + + mutex_unlock(&mb3_transfer.sysclk_lock); + + return r; +} + +static int request_timclk(bool enable) +{ + u32 val = (PRCM_TCR_DOZE_MODE | PRCM_TCR_TENSEL_MASK); + + if (!enable) + val |= PRCM_TCR_STOP_TIMERS; + writel(val, (_PRCMU_BASE + PRCM_TCR)); + + return 0; +} + +static int request_reg_clock(u8 clock, bool enable) +{ + u32 val; + unsigned long flags; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + val = readl(_PRCMU_BASE + clk_mgt[clock].offset); + if (enable) { + val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw); + } else { + clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK); + val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK); + } + writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); + + /* Release the HW semaphore. */ + writel(0, (_PRCMU_BASE + PRCM_SEM)); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); + + return 0; +} + +/** + * prcmu_request_clock() - Request for a clock to be enabled or disabled. + * @clock: The clock for which the request is made. + * @enable: Whether the clock should be enabled (true) or disabled (false). + * + * This function should only be used by the clock implementation. + * Do not use it from any other place! + */ +int prcmu_request_clock(u8 clock, bool enable) +{ + if (clock < PRCMU_NUM_REG_CLOCKS) + return request_reg_clock(clock, enable); + else if (clock == PRCMU_TIMCLK) + return request_timclk(enable); + else if (clock == PRCMU_SYSCLK) + return request_sysclk(enable); + else + return -EINVAL; +} + +int prcmu_config_esram0_deep_sleep(u8 state) +{ + if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) || + (state < ESRAM0_DEEP_SLEEP_STATE_OFF)) + return -EINVAL; + + mutex_lock(&mb4_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + writeb(((DDR_PWR_STATE_OFFHIGHLAT << 4) | DDR_PWR_STATE_ON), + (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE)); + writeb(DDR_PWR_STATE_ON, + (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE)); + writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST)); + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; +} + +int prcmu_config_hotdog(u8 threshold) +{ + mutex_lock(&mb4_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD)); + writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; +} + +int prcmu_config_hotmon(u8 low, u8 high) +{ + mutex_lock(&mb4_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW)); + writeb(high, (tcdm_base + PRCM_REQ_MB4_HOTMON_HIGH)); + writeb((HOTMON_CONFIG_LOW | HOTMON_CONFIG_HIGH), + (tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG)); + writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; +} + +static int config_hot_period(u16 val) +{ + mutex_lock(&mb4_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD)); + writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; +} + +int prcmu_start_temp_sense(u16 cycles32k) +{ + if (cycles32k == 0xFFFF) + return -EINVAL; + + return config_hot_period(cycles32k); +} + +int prcmu_stop_temp_sense(void) +{ + return config_hot_period(0xFFFF); +} + +/** + * prcmu_set_clock_divider() - Configure the clock divider. + * @clock: The clock for which the request is made. + * @divider: The clock divider. (< 32) + * + * This function should only be used by the clock implementation. + * Do not use it from any other place! + */ +int prcmu_set_clock_divider(u8 clock, u8 divider) +{ + u32 val; + unsigned long flags; + + if ((clock >= PRCMU_NUM_REG_CLOCKS) || (divider < 1) || (31 < divider)) + return -EINVAL; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + val = readl(_PRCMU_BASE + clk_mgt[clock].offset); + val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK); + val |= (u32)divider; + writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); + + /* Release the HW semaphore. */ + writel(0, (_PRCMU_BASE + PRCM_SEM)); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); + + return 0; +} /** * prcmu_abb_read() - Read register value(s) from the ABB. @@ -115,33 +1376,34 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) if (size != 1) return -EINVAL; - r = mutex_lock_interruptible(&mb5_transfer.lock); - if (r) - return r; + mutex_lock(&mb5_transfer.lock); - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); - writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP); - writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); - writeb(reg, REQ_MB5_I2C_REG); + writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); + writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); + writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); + writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL)); + + writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); if (!wait_for_completion_timeout(&mb5_transfer.work, - msecs_to_jiffies(500))) { - pr_err("prcmu: prcmu_abb_read timed out.\n"); + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); r = -EIO; - goto unlock_and_return; + } else { + r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); } - r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); + if (!r) *value = mb5_transfer.ack.value; -unlock_and_return: mutex_unlock(&mb5_transfer.lock); + return r; } -EXPORT_SYMBOL(prcmu_abb_read); /** * prcmu_abb_write() - Write register value(s) to the ABB. @@ -160,179 +1422,262 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) if (size != 1) return -EINVAL; - r = mutex_lock_interruptible(&mb5_transfer.lock); - if (r) - return r; + mutex_lock(&mb5_transfer.lock); - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); - writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP); - writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); - writeb(reg, REQ_MB5_I2C_REG); - writeb(*value, REQ_MB5_I2C_VAL); + writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); + writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); + writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); + writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL)); + + writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); if (!wait_for_completion_timeout(&mb5_transfer.work, - msecs_to_jiffies(500))) { - pr_err("prcmu: prcmu_abb_write timed out.\n"); + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); r = -EIO; - goto unlock_and_return; + } else { + r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); } - r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); -unlock_and_return: mutex_unlock(&mb5_transfer.lock); + return r; } -EXPORT_SYMBOL(prcmu_abb_write); -static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp) +/** + * prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem + */ +void prcmu_ac_wake_req(void) { - bool do_ape; - bool do_arm; - int err = 0; + u32 val; - do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP)); - do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP)); + mutex_lock(&mb0_transfer.ac_wake_lock); - mutex_lock(&mb1_transfer.lock); + val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ); + if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ) + goto unlock_and_return; - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) - cpu_relax(); + atomic_set(&ac_wake_req_state, 1); - writeb(0, MBOX_HEADER_REQ_MB0); - writeb(cpu_opp, REQ_MB1_ARMOPP); - writeb(ape_opp, REQ_MB1_APEOPP); - writeb(0, REQ_MB1_BOOSTOPP); - writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); - wait_for_completion(&mb1_transfer.work); - if ((do_ape) && (mb1_transfer.ack.ape_status != 0)) - err = -EIO; - if ((do_arm) && (mb1_transfer.ack.arm_status != 0)) - err = -EIO; + writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), + (_PRCMU_BASE + PRCM_HOSTACCESS_REQ)); - mutex_unlock(&mb1_transfer.lock); + if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + } - return err; +unlock_and_return: + mutex_unlock(&mb0_transfer.ac_wake_lock); } /** - * prcmu_set_ape_opp() - Set the OPP of the APE. - * @opp: The OPP to set. - * - * This function sets the OPP of the APE. + * prcmu_ac_sleep_req - called when ARM no longer needs to talk to modem */ -int prcmu_set_ape_opp(enum prcmu_ape_opp opp) +void prcmu_ac_sleep_req() { - return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE); + u32 val; + + mutex_lock(&mb0_transfer.ac_wake_lock); + + val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ); + if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)) + goto unlock_and_return; + + writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), + (_PRCMU_BASE + PRCM_HOSTACCESS_REQ)); + + if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + } + + atomic_set(&ac_wake_req_state, 0); + +unlock_and_return: + mutex_unlock(&mb0_transfer.ac_wake_lock); } -EXPORT_SYMBOL(prcmu_set_ape_opp); -/** - * prcmu_set_cpu_opp() - Set the OPP of the CPU. - * @opp: The OPP to set. - * - * This function sets the OPP of the CPU. - */ -int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp) +bool prcmu_is_ac_wake_requested(void) { - return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp); + return (atomic_read(&ac_wake_req_state) != 0); } -EXPORT_SYMBOL(prcmu_set_cpu_opp); /** - * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU. - * @ape_opp: The APE OPP to set. - * @cpu_opp: The CPU OPP to set. + * prcmu_system_reset - System reset * - * This function sets the OPPs of the APE and the CPU. + * Saves the reset reason code and then sets the APE_SOFRST register which + * fires interrupt to fw */ -int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp) +void prcmu_system_reset(u16 reset_code) { - return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp); + writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON)); + writel(1, (_PRCMU_BASE + PRCM_APE_SOFTRST)); } -EXPORT_SYMBOL(prcmu_set_ape_cpu_opps); /** - * prcmu_get_ape_opp() - Get the OPP of the APE. - * - * This function gets the OPP of the APE. + * prcmu_reset_modem - ask the PRCMU to reset modem */ -enum prcmu_ape_opp prcmu_get_ape_opp(void) +void prcmu_modem_reset(void) { - return readb(ACK_MB1_CURR_APEOPP); + mutex_lock(&mb1_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + /* + * No need to check return from PRCMU as modem should go in reset state + * This state is already managed by upper layer + */ + + mutex_unlock(&mb1_transfer.lock); } -EXPORT_SYMBOL(prcmu_get_ape_opp); -/** - * prcmu_get_cpu_opp() - Get the OPP of the CPU. - * - * This function gets the OPP of the CPU. The OPP is specified in %%. - * PRCMU_OPP_EXT is a special OPP value, not specified in %%. - */ -int prcmu_get_cpu_opp(void) +static void ack_dbb_wakeup(void) { - return readb(ACK_MB1_CURR_ARMOPP); + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + cpu_relax(); + + writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0)); + writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); } -EXPORT_SYMBOL(prcmu_get_cpu_opp); -bool prcmu_has_arm_maxopp(void) +static inline void print_unknown_header_warning(u8 n, u8 header) { - return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK) - == PRCM_AVS_ISMODEENABLE_MASK; + pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n", + header, n); } -static void read_mailbox_0(void) +static bool read_mailbox_0(void) { - writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR); + bool r; + u32 ev; + unsigned int n; + u8 header; + + header = readb(tcdm_base + PRCM_MBOX_HEADER_ACK_MB0); + switch (header) { + case MB0H_WAKEUP_EXE: + case MB0H_WAKEUP_SLEEP: + if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1) + ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_1_8500); + else + ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_0_8500); + + if (ev & (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK)) + complete(&mb0_transfer.ac_wake_work); + if (ev & WAKEUP_BIT_SYSCLK_OK) + complete(&mb3_transfer.sysclk_work); + + ev &= mb0_transfer.req.dbb_irqs; + + for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) { + if (ev & prcmu_irq_bit[n]) + generic_handle_irq(IRQ_PRCMU_BASE + n); + } + r = true; + break; + default: + print_unknown_header_warning(0, header); + r = false; + break; + } + writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + return r; } -static void read_mailbox_1(void) +static bool read_mailbox_1(void) { - mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP); - mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP); + mb1_transfer.ack.header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1); + mb1_transfer.ack.arm_opp = readb(tcdm_base + + PRCM_ACK_MB1_CURRENT_ARM_OPP); + mb1_transfer.ack.ape_opp = readb(tcdm_base + + PRCM_ACK_MB1_CURRENT_APE_OPP); + mb1_transfer.ack.ape_voltage_status = readb(tcdm_base + + PRCM_ACK_MB1_APE_VOLTAGE_STATUS); + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); complete(&mb1_transfer.work); - writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR); + return false; } -static void read_mailbox_2(void) +static bool read_mailbox_2(void) { - writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR); + mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS); + writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + complete(&mb2_transfer.work); + return false; } -static void read_mailbox_3(void) +static bool read_mailbox_3(void) { - writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR); + writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + return false; } -static void read_mailbox_4(void) +static bool read_mailbox_4(void) { - writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR); + u8 header; + bool do_complete = true; + + header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB4); + switch (header) { + case MB4H_MEM_ST: + case MB4H_HOTDOG: + case MB4H_HOTMON: + case MB4H_HOT_PERIOD: + break; + default: + print_unknown_header_warning(4, header); + do_complete = false; + break; + } + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + + if (do_complete) + complete(&mb4_transfer.work); + + return false; } -static void read_mailbox_5(void) +static bool read_mailbox_5(void) { - mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS); - mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL); + mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS); + mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL); + writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); complete(&mb5_transfer.work); - writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR); + return false; } -static void read_mailbox_6(void) +static bool read_mailbox_6(void) { - writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR); + writel(MBOX_BIT(6), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + return false; } -static void read_mailbox_7(void) +static bool read_mailbox_7(void) { - writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR); + writel(MBOX_BIT(7), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + return false; } -static void (* const read_mailbox[NUM_MBOX])(void) = { +static bool (* const read_mailbox[NUM_MB])(void) = { read_mailbox_0, read_mailbox_1, read_mailbox_2, @@ -347,49 +1692,199 @@ static irqreturn_t prcmu_irq_handler(int irq, void *data) { u32 bits; u8 n; + irqreturn_t r; - bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1)); + bits = (readl(_PRCMU_BASE + PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS); if (unlikely(!bits)) return IRQ_NONE; + r = IRQ_HANDLED; for (n = 0; bits; n++) { if (bits & MBOX_BIT(n)) { bits -= MBOX_BIT(n); - read_mailbox[n](); + if (read_mailbox[n]()) + r = IRQ_WAKE_THREAD; } } + return r; +} + +static irqreturn_t prcmu_irq_thread_fn(int irq, void *data) +{ + ack_dbb_wakeup(); return IRQ_HANDLED; } +static void prcmu_mask_work(struct work_struct *work) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + config_wakeups(); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); +} + +static void prcmu_irq_mask(struct irq_data *d) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags); + + mb0_transfer.req.dbb_irqs &= ~prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE]; + + spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags); + + if (d->irq != IRQ_PRCMU_CA_SLEEP) + schedule_work(&mb0_transfer.mask_work); +} + +static void prcmu_irq_unmask(struct irq_data *d) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags); + + mb0_transfer.req.dbb_irqs |= prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE]; + + spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags); + + if (d->irq != IRQ_PRCMU_CA_SLEEP) + schedule_work(&mb0_transfer.mask_work); +} + +static void noop(struct irq_data *d) +{ +} + +static struct irq_chip prcmu_irq_chip = { + .name = "prcmu", + .irq_disable = prcmu_irq_mask, + .irq_ack = noop, + .irq_mask = prcmu_irq_mask, + .irq_unmask = prcmu_irq_unmask, +}; + void __init prcmu_early_init(void) { - if (cpu_is_u8500v11() || cpu_is_u8500ed()) { + unsigned int i; + + if (cpu_is_u8500v1()) { tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1); } else if (cpu_is_u8500v2()) { + void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K); + + if (tcpm_base != NULL) { + int version; + version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET); + prcmu_version.project_number = version & 0xFF; + prcmu_version.api_version = (version >> 8) & 0xFF; + prcmu_version.func_version = (version >> 16) & 0xFF; + prcmu_version.errata = (version >> 24) & 0xFF; + pr_info("PRCMU firmware version %d.%d.%d\n", + (version >> 8) & 0xFF, (version >> 16) & 0xFF, + (version >> 24) & 0xFF); + iounmap(tcpm_base); + } + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE); } else { pr_err("prcmu: Unsupported chip version\n"); BUG(); } -} - -static int __init prcmu_init(void) -{ - if (cpu_is_u8500ed()) { - pr_err("prcmu: Unsupported chip version\n"); - return 0; - } + spin_lock_init(&mb0_transfer.lock); + spin_lock_init(&mb0_transfer.dbb_irqs_lock); + mutex_init(&mb0_transfer.ac_wake_lock); + init_completion(&mb0_transfer.ac_wake_work); mutex_init(&mb1_transfer.lock); init_completion(&mb1_transfer.work); + mutex_init(&mb2_transfer.lock); + init_completion(&mb2_transfer.work); + spin_lock_init(&mb2_transfer.auto_pm_lock); + spin_lock_init(&mb3_transfer.lock); + mutex_init(&mb3_transfer.sysclk_lock); + init_completion(&mb3_transfer.sysclk_work); + mutex_init(&mb4_transfer.lock); + init_completion(&mb4_transfer.work); mutex_init(&mb5_transfer.lock); init_completion(&mb5_transfer.work); + INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work); + + /* Initalize irqs. */ + for (i = 0; i < NUM_PRCMU_WAKEUPS; i++) { + unsigned int irq; + + irq = IRQ_PRCMU_BASE + i; + irq_set_chip_and_handler(irq, &prcmu_irq_chip, + handle_simple_irq); + set_irq_flags(irq, IRQF_VALID); + } +} + +static struct mfd_cell db8500_prcmu_devs[] = { + { + .name = "db8500-prcmu-regulators", + }, + { + .name = "cpufreq-u8500", + }, +}; + +/** + * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic + * + */ +static int __init db8500_prcmu_probe(struct platform_device *pdev) +{ + int err = 0; + + if (ux500_is_svp()) + return -ENODEV; + /* Clean up the mailbox interrupts after pre-kernel code. */ - writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR); + writel(ALL_MBOX_BITS, (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + + err = request_threaded_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, + prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL); + if (err < 0) { + pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n"); + err = -EBUSY; + goto no_irq_return; + } + + if (cpu_is_u8500v20_or_later()) + prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); + + err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs, + ARRAY_SIZE(db8500_prcmu_devs), NULL, + 0); - return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0, - "prcmu", NULL); + if (err) + pr_err("prcmu: Failed to add subdevices\n"); + else + pr_info("DB8500 PRCMU initialized\n"); + +no_irq_return: + return err; +} + +static struct platform_driver db8500_prcmu_driver = { + .driver = { + .name = "db8500-prcmu", + .owner = THIS_MODULE, + }, +}; + +static int __init db8500_prcmu_init(void) +{ + return platform_driver_probe(&db8500_prcmu_driver, db8500_prcmu_probe); } -arch_initcall(prcmu_init); +arch_initcall(db8500_prcmu_init); + +MODULE_AUTHOR("Mattias Nilsson "); +MODULE_DESCRIPTION("DB8500 PRCM Unit driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index d591d79aa6f0..917dbcab701c 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -2,57 +2,977 @@ * Copyright (C) STMicroelectronics 2009 * Copyright (C) ST-Ericsson SA 2010 * - * Author: Sundar Iyer - * Author: Martin Persson - * * License Terms: GNU General Public License v2 + * Author: Kumar Sanghvi * - * PRCM Unit definitions + * PRCMU f/w APIs */ +#ifndef __MFD_DB8500_PRCMU_H +#define __MFD_DB8500_PRCMU_H + +#include +#include -#ifndef __MACH_PRCMU_DEFS_H -#define __MACH_PRCMU_DEFS_H +/* This portion previously known as */ -enum prcmu_cpu_opp { - CPU_OPP_INIT = 0x00, - CPU_OPP_NO_CHANGE = 0x01, - CPU_OPP_100 = 0x02, - CPU_OPP_50 = 0x03, - CPU_OPP_MAX = 0x04, - CPU_OPP_EXT_CLK = 0x07 +/** + * enum state - ON/OFF state definition + * @OFF: State is ON + * @ON: State is OFF + * + */ +enum state { + OFF = 0x0, + ON = 0x1, }; -enum prcmu_ape_opp { - APE_OPP_NO_CHANGE = 0x00, - APE_OPP_100 = 0x02, - APE_OPP_50 = 0x03, + +/** + * enum ret_state - general purpose On/Off/Retention states + * + */ +enum ret_state { + OFFST = 0, + ONST = 1, + RETST = 2 }; -#endif /* __MACH_PRCMU_DEFS_H */ +/** + * enum clk_arm - ARM Cortex A9 clock schemes + * @A9_OFF: + * @A9_BOOT: + * @A9_OPPT1: + * @A9_OPPT2: + * @A9_EXTCLK: + */ +enum clk_arm { + A9_OFF, + A9_BOOT, + A9_OPPT1, + A9_OPPT2, + A9_EXTCLK +}; -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 +/** + * enum clk_gen - GEN#0/GEN#1 clock schemes + * @GEN_OFF: + * @GEN_BOOT: + * @GEN_OPPT1: + */ +enum clk_gen { + GEN_OFF, + GEN_BOOT, + GEN_OPPT1, +}; + +/* some information between arm and xp70 */ + +/** + * enum romcode_write - Romcode message written by A9 AND read by XP70 + * @RDY_2_DS: Value set when ApDeepSleep state can be executed by XP70 + * @RDY_2_XP70_RST: Value set when 0x0F has been successfully polled by the + * romcode. The xp70 will go into self-reset + */ +enum romcode_write { + RDY_2_DS = 0x09, + RDY_2_XP70_RST = 0x10 +}; + +/** + * enum romcode_read - Romcode message written by XP70 and read by A9 + * @INIT: Init value when romcode field is not used + * @FS_2_DS: Value set when power state is going from ApExecute to + * ApDeepSleep + * @END_DS: Value set when ApDeepSleep power state is reached coming from + * ApExecute state + * @DS_TO_FS: Value set when power state is going from ApDeepSleep to + * ApExecute + * @END_FS: Value set when ApExecute power state is reached coming from + * ApDeepSleep state + * @SWR: Value set when power state is going to ApReset + * @END_SWR: Value set when the xp70 finished executing ApReset actions and + * waits for romcode acknowledgment to go to self-reset + */ +enum romcode_read { + INIT = 0x00, + FS_2_DS = 0x0A, + END_DS = 0x0B, + DS_TO_FS = 0x0C, + END_FS = 0x0D, + SWR = 0x0E, + END_SWR = 0x0F +}; + +/** + * enum ap_pwrst - current power states defined in PRCMU firmware + * @NO_PWRST: Current power state init + * @AP_BOOT: Current power state is apBoot + * @AP_EXECUTE: Current power state is apExecute + * @AP_DEEP_SLEEP: Current power state is apDeepSleep + * @AP_SLEEP: Current power state is apSleep + * @AP_IDLE: Current power state is apIdle + * @AP_RESET: Current power state is apReset + */ +enum ap_pwrst { + NO_PWRST = 0x00, + AP_BOOT = 0x01, + AP_EXECUTE = 0x02, + AP_DEEP_SLEEP = 0x03, + AP_SLEEP = 0x04, + AP_IDLE = 0x05, + AP_RESET = 0x06 +}; + +/** + * enum ap_pwrst_trans - Transition states defined in PRCMU firmware + * @NO_TRANSITION: No power state transition + * @APEXECUTE_TO_APSLEEP: Power state transition from ApExecute to ApSleep + * @APIDLE_TO_APSLEEP: Power state transition from ApIdle to ApSleep + * @APBOOT_TO_APEXECUTE: Power state transition from ApBoot to ApExecute + * @APEXECUTE_TO_APDEEPSLEEP: Power state transition from ApExecute to + * ApDeepSleep + * @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle + */ +enum ap_pwrst_trans { + NO_TRANSITION = 0x00, + APEXECUTE_TO_APSLEEP = 0x01, + APIDLE_TO_APSLEEP = 0x02, /* To be removed */ + PRCMU_AP_SLEEP = 0x01, + APBOOT_TO_APEXECUTE = 0x03, + APEXECUTE_TO_APDEEPSLEEP = 0x04, /* To be removed */ + PRCMU_AP_DEEP_SLEEP = 0x04, + APEXECUTE_TO_APIDLE = 0x05, /* To be removed */ + PRCMU_AP_IDLE = 0x05, + PRCMU_AP_DEEP_IDLE = 0x07, +}; + +/** + * enum ddr_pwrst - DDR power states definition + * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged + * @DDR_PWR_STATE_ON: + * @DDR_PWR_STATE_OFFLOWLAT: + * @DDR_PWR_STATE_OFFHIGHLAT: + */ +enum ddr_pwrst { + DDR_PWR_STATE_UNCHANGED = 0x00, + DDR_PWR_STATE_ON = 0x01, + DDR_PWR_STATE_OFFLOWLAT = 0x02, + DDR_PWR_STATE_OFFHIGHLAT = 0x03 +}; + +/** + * enum arm_opp - ARM OPP states definition + * @ARM_OPP_INIT: + * @ARM_NO_CHANGE: The ARM operating point is unchanged + * @ARM_100_OPP: The new ARM operating point is arm100opp + * @ARM_50_OPP: The new ARM operating point is arm50opp + * @ARM_MAX_OPP: Operating point is "max" (more than 100) + * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100 + * @ARM_EXTCLK: The new ARM operating point is armExtClk + */ +enum arm_opp { + ARM_OPP_INIT = 0x00, + ARM_NO_CHANGE = 0x01, + ARM_100_OPP = 0x02, + ARM_50_OPP = 0x03, + ARM_MAX_OPP = 0x04, + ARM_MAX_FREQ100OPP = 0x05, + ARM_EXTCLK = 0x07 +}; + +/** + * enum ape_opp - APE OPP states definition + * @APE_OPP_INIT: + * @APE_NO_CHANGE: The APE operating point is unchanged + * @APE_100_OPP: The new APE operating point is ape100opp + * @APE_50_OPP: 50% + */ +enum ape_opp { + APE_OPP_INIT = 0x00, + APE_NO_CHANGE = 0x01, + APE_100_OPP = 0x02, + APE_50_OPP = 0x03 +}; + +/** + * enum hw_acc_state - State definition for hardware accelerator + * @HW_NO_CHANGE: The hardware accelerator state must remain unchanged + * @HW_OFF: The hardware accelerator must be switched off + * @HW_OFF_RAMRET: The hardware accelerator must be switched off with its + * internal RAM in retention + * @HW_ON: The hwa hardware accelerator hwa must be switched on * - * Author: Kumar Sanghvi - * Author: Sundar Iyer - * Author: Mattias Nilsson + * NOTE! Deprecated, to be removed when all users switched over to use the + * regulator API. + */ +enum hw_acc_state { + HW_NO_CHANGE = 0x00, + HW_OFF = 0x01, + HW_OFF_RAMRET = 0x02, + HW_ON = 0x04 +}; + +/** + * enum mbox_2_arm_stat - Status messages definition for mbox_arm + * @BOOT_TO_EXECUTEOK: The apBoot to apExecute state transition has been + * completed + * @DEEPSLEEPOK: The apExecute to apDeepSleep state transition has been + * completed + * @SLEEPOK: The apExecute to apSleep state transition has been completed + * @IDLEOK: The apExecute to apIdle state transition has been completed + * @SOFTRESETOK: The A9 watchdog/ SoftReset state has been completed + * @SOFTRESETGO : The A9 watchdog/SoftReset state is on going + * @BOOT_TO_EXECUTE: The apBoot to apExecute state transition is on going + * @EXECUTE_TO_DEEPSLEEP: The apExecute to apDeepSleep state transition is on + * going + * @DEEPSLEEP_TO_EXECUTE: The apDeepSleep to apExecute state transition is on + * going + * @DEEPSLEEP_TO_EXECUTEOK: The apDeepSleep to apExecute state transition has + * been completed + * @EXECUTE_TO_SLEEP: The apExecute to apSleep state transition is on going + * @SLEEP_TO_EXECUTE: The apSleep to apExecute state transition is on going + * @SLEEP_TO_EXECUTEOK: The apSleep to apExecute state transition has been + * completed + * @EXECUTE_TO_IDLE: The apExecute to apIdle state transition is on going + * @IDLE_TO_EXECUTE: The apIdle to apExecute state transition is on going + * @IDLE_TO_EXECUTEOK: The apIdle to apExecute state transition has been + * completed + * @INIT_STATUS: Status init + */ +enum ap_pwrsttr_status { + BOOT_TO_EXECUTEOK = 0xFF, + DEEPSLEEPOK = 0xFE, + SLEEPOK = 0xFD, + IDLEOK = 0xFC, + SOFTRESETOK = 0xFB, + SOFTRESETGO = 0xFA, + BOOT_TO_EXECUTE = 0xF9, + EXECUTE_TO_DEEPSLEEP = 0xF8, + DEEPSLEEP_TO_EXECUTE = 0xF7, + DEEPSLEEP_TO_EXECUTEOK = 0xF6, + EXECUTE_TO_SLEEP = 0xF5, + SLEEP_TO_EXECUTE = 0xF4, + SLEEP_TO_EXECUTEOK = 0xF3, + EXECUTE_TO_IDLE = 0xF2, + IDLE_TO_EXECUTE = 0xF1, + IDLE_TO_EXECUTEOK = 0xF0, + RDYTODS_RETURNTOEXE = 0xEF, + NORDYTODS_RETURNTOEXE = 0xEE, + EXETOSLEEP_RETURNTOEXE = 0xED, + EXETOIDLE_RETURNTOEXE = 0xEC, + INIT_STATUS = 0xEB, + + /*error messages */ + INITERROR = 0x00, + PLLARMLOCKP_ER = 0x01, + PLLDDRLOCKP_ER = 0x02, + PLLSOCLOCKP_ER = 0x03, + PLLSOCK1LOCKP_ER = 0x04, + ARMWFI_ER = 0x05, + SYSCLKOK_ER = 0x06, + I2C_NACK_DATA_ER = 0x07, + BOOT_ER = 0x08, + I2C_STATUS_ALWAYS_1 = 0x0A, + I2C_NACK_REG_ADDR_ER = 0x0B, + I2C_NACK_DATA0123_ER = 0x1B, + I2C_NACK_ADDR_ER = 0x1F, + CURAPPWRSTISNOT_BOOT = 0x20, + CURAPPWRSTISNOT_EXECUTE = 0x21, + CURAPPWRSTISNOT_SLEEPMODE = 0x22, + CURAPPWRSTISNOT_CORRECTFORIT10 = 0x23, + FIFO4500WUISNOT_WUPEVENT = 0x24, + PLL32KLOCKP_ER = 0x29, + DDRDEEPSLEEPOK_ER = 0x2A, + ROMCODEREADY_ER = 0x50, + WUPBEFOREDS = 0x51, + DDRCONFIG_ER = 0x52, + WUPBEFORESLEEP = 0x53, + WUPBEFOREIDLE = 0x54 +}; /* earlier called as mbox_2_arm_stat */ + +/** + * enum dvfs_stat - DVFS status messages definition + * @DVFS_GO: A state transition DVFS is on going + * @DVFS_ARM100OPPOK: The state transition DVFS has been completed for 100OPP + * @DVFS_ARM50OPPOK: The state transition DVFS has been completed for 50OPP + * @DVFS_ARMEXTCLKOK: The state transition DVFS has been completed for EXTCLK + * @DVFS_NOCHGTCLKOK: The state transition DVFS has been completed for + * NOCHGCLK + * @DVFS_INITSTATUS: Value init + */ +enum dvfs_stat { + DVFS_GO = 0xFF, + DVFS_ARM100OPPOK = 0xFE, + DVFS_ARM50OPPOK = 0xFD, + DVFS_ARMEXTCLKOK = 0xFC, + DVFS_NOCHGTCLKOK = 0xFB, + DVFS_INITSTATUS = 0x00 +}; + +/** + * enum sva_mmdsp_stat - SVA MMDSP status messages + * @SVA_MMDSP_GO: SVAMMDSP interrupt has happened + * @SVA_MMDSP_INIT: Status init + */ +enum sva_mmdsp_stat { + SVA_MMDSP_GO = 0xFF, + SVA_MMDSP_INIT = 0x00 +}; + +/** + * enum sia_mmdsp_stat - SIA MMDSP status messages + * @SIA_MMDSP_GO: SIAMMDSP interrupt has happened + * @SIA_MMDSP_INIT: Status init + */ +enum sia_mmdsp_stat { + SIA_MMDSP_GO = 0xFF, + SIA_MMDSP_INIT = 0x00 +}; + +/** + * enum mbox_to_arm_err - Error messages definition + * @INIT_ERR: Init value + * @PLLARMLOCKP_ERR: PLLARM has not been correctly locked in given time + * @PLLDDRLOCKP_ERR: PLLDDR has not been correctly locked in the given time + * @PLLSOC0LOCKP_ERR: PLLSOC0 has not been correctly locked in the given time + * @PLLSOC1LOCKP_ERR: PLLSOC1 has not been correctly locked in the given time + * @ARMWFI_ERR: The ARM WFI has not been correctly executed in the given time + * @SYSCLKOK_ERR: The SYSCLK is not available in the given time + * @BOOT_ERR: Romcode has not validated the XP70 self reset in the given time + * @ROMCODESAVECONTEXT: The Romcode didn.t correctly save it secure context + * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transfered + * through I2C has not been correctly executed in the given time + * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transfered + * through I2C has not been correctly executed in the given time + * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transfered through + * I2C has not been correctly executed in the given time + * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transfered + * through I2C has not been correctly executed in the given time + * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transfered through + * I2C has not been correctly executed in the given time + * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transfered + * through I2C has not been correctly executed in the given time + * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transfered through + * I2C has not been correctly executed in the given time + * @VSAFEHPVALTO_ERR: The SAFE high power supply value transfered through I2C + * has not been correctly executed in the given time + * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transfered through I2C has + * not been correctly executed in the given time + * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transfered through I2C has + * not been correctly executed in the given time + * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transfered through + * I2C has not been correctly executed in the given time + * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transfered through + * I2C has not been correctly executed in the given time + * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transfered + * through I2C has not been correctly executed in the given time + * @CURAPPWRSTISNOTBOOT:Generated when Arm want to do power state transition + * ApBoot to ApExecute but the power current state is not Apboot + * @CURAPPWRSTISNOTEXECUTE: Generated when Arm want to do power state + * transition from ApExecute to others power state but the + * power current state is not ApExecute + * @CURAPPWRSTISNOTSLEEPMODE: Generated when wake up events are transmitted + * but the power current state is not ApDeepSleep/ApSleep/ApIdle + * @CURAPPWRSTISNOTCORRECTDBG: Generated when wake up events are transmitted + * but the power current state is not correct + * @ARMREGU1VALTO_ERR:The ArmRegu1 value transferred through I2C has not + * been correctly executed in the given time + * @ARMREGU2VALTO_ERR: The ArmRegu2 value transferred through I2C has not + * been correctly executed in the given time + * @VAPEREGUVALTO_ERR: The VApeRegu value transfered through I2C has not + * been correctly executed in the given time + * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transfered through I2C has not + * been correctly executed in the given time + * @VMODREGUVALTO_ERR: The VModemRegu value transfered through I2C has not + * been correctly executed in the given time + */ +enum mbox_to_arm_err { + INIT_ERR = 0x00, + PLLARMLOCKP_ERR = 0x01, + PLLDDRLOCKP_ERR = 0x02, + PLLSOC0LOCKP_ERR = 0x03, + PLLSOC1LOCKP_ERR = 0x04, + ARMWFI_ERR = 0x05, + SYSCLKOK_ERR = 0x06, + BOOT_ERR = 0x07, + ROMCODESAVECONTEXT = 0x08, + VARMHIGHSPEEDVALTO_ERR = 0x10, + VARMHIGHSPEEDACCESS_ERR = 0x11, + VARMLOWSPEEDVALTO_ERR = 0x12, + VARMLOWSPEEDACCESS_ERR = 0x13, + VARMRETENTIONVALTO_ERR = 0x14, + VARMRETENTIONACCESS_ERR = 0x15, + VAPEHIGHSPEEDVALTO_ERR = 0x16, + VSAFEHPVALTO_ERR = 0x17, + VMODSEL1VALTO_ERR = 0x18, + VMODSEL2VALTO_ERR = 0x19, + VARMOFFACCESS_ERR = 0x1A, + VAPEOFFACCESS_ERR = 0x1B, + VARMRETACCES_ERR = 0x1C, + CURAPPWRSTISNOTBOOT = 0x20, + CURAPPWRSTISNOTEXECUTE = 0x21, + CURAPPWRSTISNOTSLEEPMODE = 0x22, + CURAPPWRSTISNOTCORRECTDBG = 0x23, + ARMREGU1VALTO_ERR = 0x24, + ARMREGU2VALTO_ERR = 0x25, + VAPEREGUVALTO_ERR = 0x26, + VSMPS3REGUVALTO_ERR = 0x27, + VMODREGUVALTO_ERR = 0x28 +}; + +enum hw_acc { + SVAMMDSP = 0, + SVAPIPE = 1, + SIAMMDSP = 2, + SIAPIPE = 3, + SGA = 4, + B2R2MCDE = 5, + ESRAM12 = 6, + ESRAM34 = 7, +}; + +enum cs_pwrmgt { + PWRDNCS0 = 0, + WKUPCS0 = 1, + PWRDNCS1 = 2, + WKUPCS1 = 3 +}; + +/* Defs related to autonomous power management */ + +/** + * enum sia_sva_pwr_policy - Power policy + * @NO_CHGT: No change + * @DSPOFF_HWPOFF: + * @DSPOFFRAMRET_HWPOFF: + * @DSPCLKOFF_HWPOFF: + * @DSPCLKOFF_HWPCLKOFF: * - * License Terms: GNU General Public License v2 + */ +enum sia_sva_pwr_policy { + NO_CHGT = 0x0, + DSPOFF_HWPOFF = 0x1, + DSPOFFRAMRET_HWPOFF = 0x2, + DSPCLKOFF_HWPOFF = 0x3, + DSPCLKOFF_HWPCLKOFF = 0x4, +}; + +/** + * enum auto_enable - Auto Power enable + * @AUTO_OFF: + * @AUTO_ON: + * + */ +enum auto_enable { + AUTO_OFF = 0x0, + AUTO_ON = 0x1, +}; + +/* End of file previously known as prcmu-fw-defs_v1.h */ + +/* PRCMU Wakeup defines */ +enum prcmu_wakeup_index { + PRCMU_WAKEUP_INDEX_RTC, + PRCMU_WAKEUP_INDEX_RTT0, + PRCMU_WAKEUP_INDEX_RTT1, + PRCMU_WAKEUP_INDEX_HSI0, + PRCMU_WAKEUP_INDEX_HSI1, + PRCMU_WAKEUP_INDEX_USB, + PRCMU_WAKEUP_INDEX_ABB, + PRCMU_WAKEUP_INDEX_ABB_FIFO, + PRCMU_WAKEUP_INDEX_ARM, + NUM_PRCMU_WAKEUP_INDICES +}; +#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name)) + +/* PRCMU QoS APE OPP class */ +#define PRCMU_QOS_APE_OPP 1 +#define PRCMU_QOS_DDR_OPP 2 +#define PRCMU_QOS_DEFAULT_VALUE -1 + +/** + * enum hw_acc_dev - enum for hw accelerators + * @HW_ACC_SVAMMDSP: for SVAMMDSP + * @HW_ACC_SVAPIPE: for SVAPIPE + * @HW_ACC_SIAMMDSP: for SIAMMDSP + * @HW_ACC_SIAPIPE: for SIAPIPE + * @HW_ACC_SGA: for SGA + * @HW_ACC_B2R2: for B2R2 + * @HW_ACC_MCDE: for MCDE + * @HW_ACC_ESRAM1: for ESRAM1 + * @HW_ACC_ESRAM2: for ESRAM2 + * @HW_ACC_ESRAM3: for ESRAM3 + * @HW_ACC_ESRAM4: for ESRAM4 + * @NUM_HW_ACC: number of hardware accelerators + * + * Different hw accelerators which can be turned ON/ + * OFF or put into retention (MMDSPs and ESRAMs). + * Used with EPOD API. * - * PRCM Unit f/w API + * NOTE! Deprecated, to be removed when all users switched over to use the + * regulator API. + */ +enum hw_acc_dev { + HW_ACC_SVAMMDSP, + HW_ACC_SVAPIPE, + HW_ACC_SIAMMDSP, + HW_ACC_SIAPIPE, + HW_ACC_SGA, + HW_ACC_B2R2, + HW_ACC_MCDE, + HW_ACC_ESRAM1, + HW_ACC_ESRAM2, + HW_ACC_ESRAM3, + HW_ACC_ESRAM4, + NUM_HW_ACC +}; + +/* + * Ids for all EPODs (power domains) + * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP + * - EPOD_ID_SVAPIPE: power domain for SVA pipe + * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP + * - EPOD_ID_SIAPIPE: power domain for SIA pipe + * - EPOD_ID_SGA: power domain for SGA + * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE + * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2 + * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4 + * - NUM_EPOD_ID: number of power domains + */ +#define EPOD_ID_SVAMMDSP 0 +#define EPOD_ID_SVAPIPE 1 +#define EPOD_ID_SIAMMDSP 2 +#define EPOD_ID_SIAPIPE 3 +#define EPOD_ID_SGA 4 +#define EPOD_ID_B2R2_MCDE 5 +#define EPOD_ID_ESRAM12 6 +#define EPOD_ID_ESRAM34 7 +#define NUM_EPOD_ID 8 + +/* + * state definition for EPOD (power domain) + * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged + * - EPOD_STATE_OFF: The EPOD is switched off + * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in + * retention + * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off + * - EPOD_STATE_ON: Same as above, but with clock enabled */ -#ifndef __MACH_PRCMU_H -#define __MACH_PRCMU_H +#define EPOD_STATE_NO_CHANGE 0x00 +#define EPOD_STATE_OFF 0x01 +#define EPOD_STATE_RAMRET 0x02 +#define EPOD_STATE_ON_CLK_OFF 0x03 +#define EPOD_STATE_ON 0x04 +/* + * CLKOUT sources + */ +#define PRCMU_CLKSRC_CLK38M 0x00 +#define PRCMU_CLKSRC_ACLK 0x01 +#define PRCMU_CLKSRC_SYSCLK 0x02 +#define PRCMU_CLKSRC_LCDCLK 0x03 +#define PRCMU_CLKSRC_SDMMCCLK 0x04 +#define PRCMU_CLKSRC_TVCLK 0x05 +#define PRCMU_CLKSRC_TIMCLK 0x06 +#define PRCMU_CLKSRC_CLK009 0x07 +/* These are only valid for CLKOUT1: */ +#define PRCMU_CLKSRC_SIAMMDSPCLK 0x40 +#define PRCMU_CLKSRC_I2CCLK 0x41 +#define PRCMU_CLKSRC_MSP02CLK 0x42 +#define PRCMU_CLKSRC_ARMPLL_OBSCLK 0x43 +#define PRCMU_CLKSRC_HSIRXCLK 0x44 +#define PRCMU_CLKSRC_HSITXCLK 0x45 +#define PRCMU_CLKSRC_ARMCLKFIX 0x46 +#define PRCMU_CLKSRC_HDMICLK 0x47 + +/* + * Definitions for autonomous power management configuration. + */ + +#define PRCMU_AUTO_PM_OFF 0 +#define PRCMU_AUTO_PM_ON 1 + +#define PRCMU_AUTO_PM_POWER_ON_HSEM BIT(0) +#define PRCMU_AUTO_PM_POWER_ON_ABB_FIFO_IT BIT(1) + +enum prcmu_auto_pm_policy { + PRCMU_AUTO_PM_POLICY_NO_CHANGE, + PRCMU_AUTO_PM_POLICY_DSP_OFF_HWP_OFF, + PRCMU_AUTO_PM_POLICY_DSP_OFF_RAMRET_HWP_OFF, + PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_OFF, + PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_CLK_OFF, +}; + +/** + * struct prcmu_auto_pm_config - Autonomous power management configuration. + * @sia_auto_pm_enable: SIA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON}) + * @sia_power_on: SIA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask) + * @sia_policy: SIA power policy. (enum prcmu_auto_pm_policy) + * @sva_auto_pm_enable: SVA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON}) + * @sva_power_on: SVA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask) + * @sva_policy: SVA power policy. (enum prcmu_auto_pm_policy) + */ +struct prcmu_auto_pm_config { + u8 sia_auto_pm_enable; + u8 sia_power_on; + u8 sia_policy; + u8 sva_auto_pm_enable; + u8 sva_power_on; + u8 sva_policy; +}; + +/** + * enum ddr_opp - DDR OPP states definition + * @DDR_100_OPP: The new DDR operating point is ddr100opp + * @DDR_50_OPP: The new DDR operating point is ddr50opp + * @DDR_25_OPP: The new DDR operating point is ddr25opp + */ +enum ddr_opp { + DDR_100_OPP = 0x00, + DDR_50_OPP = 0x01, + DDR_25_OPP = 0x02, +}; + +/* + * Clock identifiers. + */ +enum prcmu_clock { + PRCMU_SGACLK, + PRCMU_UARTCLK, + PRCMU_MSP02CLK, + PRCMU_MSP1CLK, + PRCMU_I2CCLK, + PRCMU_SDMMCCLK, + PRCMU_SLIMCLK, + PRCMU_PER1CLK, + PRCMU_PER2CLK, + PRCMU_PER3CLK, + PRCMU_PER5CLK, + PRCMU_PER6CLK, + PRCMU_PER7CLK, + PRCMU_LCDCLK, + PRCMU_BMLCLK, + PRCMU_HSITXCLK, + PRCMU_HSIRXCLK, + PRCMU_HDMICLK, + PRCMU_APEATCLK, + PRCMU_APETRACECLK, + PRCMU_MCDECLK, + PRCMU_IPI2CCLK, + PRCMU_DSIALTCLK, + PRCMU_DMACLK, + PRCMU_B2R2CLK, + PRCMU_TVCLK, + PRCMU_SSPCLK, + PRCMU_RNGCLK, + PRCMU_UICCCLK, + PRCMU_NUM_REG_CLOCKS, + PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS, + PRCMU_TIMCLK, +}; + +/* + * Definitions for controlling ESRAM0 in deep sleep. + */ +#define ESRAM0_DEEP_SLEEP_STATE_OFF 1 +#define ESRAM0_DEEP_SLEEP_STATE_RET 2 + +#ifdef CONFIG_MFD_DB8500_PRCMU void __init prcmu_early_init(void); +int prcmu_set_display_clocks(void); +int prcmu_disable_dsipll(void); +int prcmu_enable_dsipll(void); +#else +static inline void __init prcmu_early_init(void) {} +#endif + +#ifdef CONFIG_MFD_DB8500_PRCMU + +int prcmu_set_rc_a2p(enum romcode_write); +enum romcode_read prcmu_get_rc_p2a(void); +enum ap_pwrst prcmu_get_xp70_current_state(void); +int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); + +void prcmu_enable_wakeups(u32 wakeups); +static inline void prcmu_disable_wakeups(void) +{ + prcmu_enable_wakeups(0); +} + +void prcmu_config_abb_event_readout(u32 abb_events); +void prcmu_get_abb_event_buffer(void __iomem **buf); +int prcmu_set_arm_opp(u8 opp); +int prcmu_get_arm_opp(void); +bool prcmu_has_arm_maxopp(void); +bool prcmu_is_u8400(void); +int prcmu_set_ape_opp(u8 opp); +int prcmu_get_ape_opp(void); +int prcmu_request_ape_opp_100_voltage(bool enable); +int prcmu_release_usb_wakeup_state(void); +int prcmu_set_ddr_opp(u8 opp); +int prcmu_get_ddr_opp(void); +unsigned long prcmu_qos_get_cpufreq_opp_delay(void); +void prcmu_qos_set_cpufreq_opp_delay(unsigned long); +/* NOTE! Use regulator framework instead */ +int prcmu_set_hwacc(u16 hw_acc_dev, u8 state); +int prcmu_set_epod(u16 epod_id, u8 epod_state); +void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, + struct prcmu_auto_pm_config *idle); +bool prcmu_is_auto_pm_enabled(void); + +int prcmu_config_clkout(u8 clkout, u8 source, u8 div); +int prcmu_request_clock(u8 clock, bool enable); +int prcmu_set_clock_divider(u8 clock, u8 divider); +int prcmu_config_esram0_deep_sleep(u8 state); +int prcmu_config_hotdog(u8 threshold); +int prcmu_config_hotmon(u8 low, u8 high); +int prcmu_start_temp_sense(u16 cycles32k); +int prcmu_stop_temp_sense(void); int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); -int prcmu_set_ape_opp(enum prcmu_ape_opp opp); -int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp); -int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp); -enum prcmu_ape_opp prcmu_get_ape_opp(void); -int prcmu_get_cpu_opp(void); -bool prcmu_has_arm_maxopp(void); -#endif /* __MACH_PRCMU_H */ +void prcmu_ac_wake_req(void); +void prcmu_ac_sleep_req(void); +void prcmu_system_reset(u16 reset_code); +void prcmu_modem_reset(void); +bool prcmu_is_ac_wake_requested(void); +void prcmu_enable_spi2(void); +void prcmu_disable_spi2(void); + +#else /* !CONFIG_MFD_DB8500_PRCMU */ + +static inline int prcmu_set_rc_a2p(enum romcode_write code) +{ + return 0; +} + +static inline enum romcode_read prcmu_get_rc_p2a(void) +{ + return INIT; +} + +static inline enum ap_pwrst prcmu_get_xp70_current_state(void) +{ + return AP_EXECUTE; +} + +static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk, + bool keep_ap_pll) +{ + return 0; +} + +static inline void prcmu_enable_wakeups(u32 wakeups) {} + +static inline void prcmu_disable_wakeups(void) {} + +static inline void prcmu_config_abb_event_readout(u32 abb_events) {} + +static inline int prcmu_set_arm_opp(u8 opp) +{ + return 0; +} + +static inline int prcmu_get_arm_opp(void) +{ + return ARM_100_OPP; +} + +static bool prcmu_has_arm_maxopp(void) +{ + return false; +} + +static bool prcmu_is_u8400(void) +{ + return false; +} + +static inline int prcmu_set_ape_opp(u8 opp) +{ + return 0; +} + +static inline int prcmu_get_ape_opp(void) +{ + return APE_100_OPP; +} + +static inline int prcmu_request_ape_opp_100_voltage(bool enable) +{ + return 0; +} + +static inline int prcmu_release_usb_wakeup_state(void) +{ + return 0; +} + +static inline int prcmu_set_ddr_opp(u8 opp) +{ + return 0; +} + +static inline int prcmu_get_ddr_opp(void) +{ + return DDR_100_OPP; +} + +static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void) +{ + return 0; +} + +static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {} + +static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state) +{ + return 0; +} + +static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, + struct prcmu_auto_pm_config *idle) +{ +} + +static inline bool prcmu_is_auto_pm_enabled(void) +{ + return false; +} + +static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div) +{ + return 0; +} + +static inline int prcmu_request_clock(u8 clock, bool enable) +{ + return 0; +} + +static inline int prcmu_set_clock_divider(u8 clock, u8 divider) +{ + return 0; +} + +int prcmu_config_esram0_deep_sleep(u8 state) +{ + return 0; +} + +static inline int prcmu_config_hotdog(u8 threshold) +{ + return 0; +} + +static inline int prcmu_config_hotmon(u8 low, u8 high) +{ + return 0; +} + +static inline int prcmu_start_temp_sense(u16 cycles32k) +{ + return 0; +} + +static inline int prcmu_stop_temp_sense(void) +{ + return 0; +} + +static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +{ + return -ENOSYS; +} + +static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + return -ENOSYS; +} + +static inline void prcmu_ac_wake_req(void) {} + +static inline void prcmu_ac_sleep_req(void) {} + +static inline void prcmu_system_reset(u16 reset_code) {} + +static inline void prcmu_modem_reset(void) {} + +static inline bool prcmu_is_ac_wake_requested(void) +{ + return false; +} + +#ifndef CONFIG_UX500_SOC_DB5500 +static inline int prcmu_set_display_clocks(void) +{ + return 0; +} + +static inline int prcmu_disable_dsipll(void) +{ + return 0; +} + +static inline int prcmu_enable_dsipll(void) +{ + return 0; +} +#endif + +static inline int prcmu_enable_spi2(void) +{ + return 0; +} + +static inline int prcmu_disable_spi2(void) +{ + return 0; +} + +#endif /* !CONFIG_MFD_DB8500_PRCMU */ + +#ifdef CONFIG_UX500_PRCMU_QOS_POWER +int prcmu_qos_requirement(int pm_qos_class); +int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value); +int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value); +void prcmu_qos_remove_requirement(int pm_qos_class, char *name); +int prcmu_qos_add_notifier(int prcmu_qos_class, + struct notifier_block *notifier); +int prcmu_qos_remove_notifier(int prcmu_qos_class, + struct notifier_block *notifier); +#else +static inline int prcmu_qos_requirement(int prcmu_qos_class) +{ + return 0; +} + +static inline int prcmu_qos_add_requirement(int prcmu_qos_class, + char *name, s32 value) +{ + return 0; +} + +static inline int prcmu_qos_update_requirement(int prcmu_qos_class, + char *name, s32 new_value) +{ + return 0; +} + +static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name) +{ +} + +static inline int prcmu_qos_add_notifier(int prcmu_qos_class, + struct notifier_block *notifier) +{ + return 0; +} +static inline int prcmu_qos_remove_notifier(int prcmu_qos_class, + struct notifier_block *notifier) +{ + return 0; +} + +#endif + +#endif /* __MFD_DB8500_PRCMU_H */ -- cgit v1.2.3 From 8317797ca657081ed81312ea3501f3a3d59d52e9 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 3 May 2011 18:14:48 +0200 Subject: mfd: add DB5500 PRCMU driver This adds the DB5500 PRCMU driver. Right now this one is pretty restricted in functionality, exposing a simple interface to send I2C messages. Acked-by: Samuel Ortiz Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + arch/arm/mach-ux500/cpu.c | 3 + drivers/mfd/Kconfig | 10 + drivers/mfd/Makefile | 1 + drivers/mfd/db5500-prcmu-regs.h | 115 ++++++++++ drivers/mfd/db5500-prcmu.c | 448 +++++++++++++++++++++++++++++++++++++++ include/linux/mfd/db5500-prcmu.h | 45 ++++ 7 files changed, 623 insertions(+) create mode 100644 drivers/mfd/db5500-prcmu-regs.h create mode 100644 drivers/mfd/db5500-prcmu.c create mode 100644 include/linux/mfd/db5500-prcmu.h (limited to 'arch/arm/mach-ux500') diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 8071d2746f70..365c4c35faa7 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -12,6 +12,7 @@ menu "Ux500 SoC" config UX500_SOC_DB5500 bool "DB5500" + select MFD_DB5500_PRCMU config UX500_SOC_DB8500 bool "DB8500" diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 11360f734cec..1da23bb87c16 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include @@ -49,6 +50,8 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ + if (cpu_is_u5500()) + db5500_prcmu_early_init(); if (cpu_is_u8500()) prcmu_early_init(); clk_init(); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 7eaeb9750793..481770ab2716 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -585,6 +585,16 @@ config MFD_DB8500_PRCMU system controller running an XP70 microprocessor, which is accessed through a register map. +config MFD_DB5500_PRCMU + bool "ST-Ericsson DB5500 Power Reset Control Management Unit" + depends on UX500_SOC_DB5500 + select MFD_CORE + help + Select this option to enable support for the DB5500 Power Reset + and Control Management Unit. This is basically an autonomous + system controller running an XP70 microprocessor, which is accessed + through a register map. + config MFD_CS5535 tristate "Support for CS5535 and CS5536 southbridge core functions" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 814c57a692a9..24aa44448daf 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -79,6 +79,7 @@ obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o # ab8500-i2c need to come after db8500-prcmu (which provides the channel) obj-$(CONFIG_AB8500_I2C_CORE) += ab8500-i2c.o +obj-$(CONFIG_MFD_DB5500_PRCMU) += db5500-prcmu.o obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o obj-$(CONFIG_PMIC_ADP5520) += adp5520.o obj-$(CONFIG_LPC_SCH) += lpc_sch.o diff --git a/drivers/mfd/db5500-prcmu-regs.h b/drivers/mfd/db5500-prcmu-regs.h new file mode 100644 index 000000000000..9a8e9e4ddd33 --- /dev/null +++ b/drivers/mfd/db5500-prcmu-regs.h @@ -0,0 +1,115 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Kumar Sanghvi + * Author: Sundar Iyer + * + * License Terms: GNU General Public License v2 + * + * PRCM Unit registers + */ + +#ifndef __MACH_PRCMU_REGS_H +#define __MACH_PRCMU_REGS_H + +#include + +#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) +#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE 0x3f +#define PRCM_ARM_PLLDIVPS_MAX_MASK 0xf + +#define PRCM_PLLARM_LOCKP (_PRCMU_BASE + 0x0a8) +#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 0x2 + +#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) +#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ 0x1 + +#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) +#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE 0x1 +#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON 0x100 + +#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0) +#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4) +#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0) +#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c) +#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308) + +/* ARM WFI Standby signal register */ +#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) +#define PRCM_IOCR (_PRCMU_BASE + 0x310) +#define PRCM_IOCR_IOFORCE 0x1 + +/* CPU mailbox registers */ +#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc) +#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100) +#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104) + +/* Dual A9 core interrupt management unit registers */ +#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328) +#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ 0x1 + +#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c) +#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c) +#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120) +#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124) +#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128) +#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C) +#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260) +#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264) +#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268) +#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C) + +#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334) +#define ARM_WAKEUP_MODEM 0x1 + +#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C) +#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494) +#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174) + +#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148) +#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150) +#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158) +#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160) +#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168) +#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484) +#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488) +#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018) + +/* System reset register */ +#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228) + +/* Level shifter and clamp control registers */ +#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) +#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) + +/* PRCMU clock/PLL/reset registers */ +#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) +#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) +#define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508) +#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044) +#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064) +#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058) +#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c) +#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) +#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) +#define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508) +#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) +#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) +#define PRCM_CLKOCR (_PRCMU_BASE + 0x1CC) + +/* ePOD and memory power signal control registers */ +#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410) +#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304) + +/* Debug power control unit registers */ +#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254) + +/* Miscellaneous unit registers */ +#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) +#define PRCM_GPIOCR (_PRCMU_BASE + 0x138) +#define PRCM_GPIOCR_DBG_STM_MOD_CMD1 0x800 +#define PRCM_GPIOCR_DBG_UARTMOD_CMD0 0x1 + + +#endif /* __MACH_PRCMU__REGS_H */ diff --git a/drivers/mfd/db5500-prcmu.c b/drivers/mfd/db5500-prcmu.c new file mode 100644 index 000000000000..9dbb3cab4a6f --- /dev/null +++ b/drivers/mfd/db5500-prcmu.c @@ -0,0 +1,448 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Mattias Nilsson + * + * U5500 PRCM Unit interface driver + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "db5500-prcmu-regs.h" + +#define _PRCM_MB_HEADER (tcdm_base + 0xFE8) +#define PRCM_REQ_MB0_HEADER (_PRCM_MB_HEADER + 0x0) +#define PRCM_REQ_MB1_HEADER (_PRCM_MB_HEADER + 0x1) +#define PRCM_REQ_MB2_HEADER (_PRCM_MB_HEADER + 0x2) +#define PRCM_REQ_MB3_HEADER (_PRCM_MB_HEADER + 0x3) +#define PRCM_REQ_MB4_HEADER (_PRCM_MB_HEADER + 0x4) +#define PRCM_REQ_MB5_HEADER (_PRCM_MB_HEADER + 0x5) +#define PRCM_REQ_MB6_HEADER (_PRCM_MB_HEADER + 0x6) +#define PRCM_REQ_MB7_HEADER (_PRCM_MB_HEADER + 0x7) +#define PRCM_ACK_MB0_HEADER (_PRCM_MB_HEADER + 0x8) +#define PRCM_ACK_MB1_HEADER (_PRCM_MB_HEADER + 0x9) +#define PRCM_ACK_MB2_HEADER (_PRCM_MB_HEADER + 0xa) +#define PRCM_ACK_MB3_HEADER (_PRCM_MB_HEADER + 0xb) +#define PRCM_ACK_MB4_HEADER (_PRCM_MB_HEADER + 0xc) +#define PRCM_ACK_MB5_HEADER (_PRCM_MB_HEADER + 0xd) +#define PRCM_ACK_MB6_HEADER (_PRCM_MB_HEADER + 0xe) +#define PRCM_ACK_MB7_HEADER (_PRCM_MB_HEADER + 0xf) + +/* Req Mailboxes */ +#define PRCM_REQ_MB0 (tcdm_base + 0xFD8) +#define PRCM_REQ_MB1 (tcdm_base + 0xFCC) +#define PRCM_REQ_MB2 (tcdm_base + 0xFC4) +#define PRCM_REQ_MB3 (tcdm_base + 0xFC0) +#define PRCM_REQ_MB4 (tcdm_base + 0xF98) +#define PRCM_REQ_MB5 (tcdm_base + 0xF90) +#define PRCM_REQ_MB6 (tcdm_base + 0xF8C) +#define PRCM_REQ_MB7 (tcdm_base + 0xF84) + +/* Ack Mailboxes */ +#define PRCM_ACK_MB0 (tcdm_base + 0xF38) +#define PRCM_ACK_MB1 (tcdm_base + 0xF30) +#define PRCM_ACK_MB2 (tcdm_base + 0xF24) +#define PRCM_ACK_MB3 (tcdm_base + 0xF20) +#define PRCM_ACK_MB4 (tcdm_base + 0xF1C) +#define PRCM_ACK_MB5 (tcdm_base + 0xF14) +#define PRCM_ACK_MB6 (tcdm_base + 0xF0C) +#define PRCM_ACK_MB7 (tcdm_base + 0xF08) + +enum mb_return_code { + RC_SUCCESS, + RC_FAIL, +}; + +/* Mailbox 0 headers. */ +enum mb0_header { + /* request */ + RMB0H_PWR_STATE_TRANS = 1, + RMB0H_WAKE_UP_CFG, + RMB0H_RD_WAKE_UP_ACK, + /* acknowledge */ + AMB0H_WAKE_UP = 1, +}; + +/* Mailbox 5 headers. */ +enum mb5_header { + MB5H_I2C_WRITE = 1, + MB5H_I2C_READ, +}; + +/* Request mailbox 5 fields. */ +#define PRCM_REQ_MB5_I2C_SLAVE (PRCM_REQ_MB5 + 0) +#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 1) +#define PRCM_REQ_MB5_I2C_SIZE (PRCM_REQ_MB5 + 2) +#define PRCM_REQ_MB5_I2C_DATA (PRCM_REQ_MB5 + 4) + +/* Acknowledge mailbox 5 fields. */ +#define PRCM_ACK_MB5_RETURN_CODE (PRCM_ACK_MB5 + 0) +#define PRCM_ACK_MB5_I2C_DATA (PRCM_ACK_MB5 + 4) + +#define NUM_MB 8 +#define MBOX_BIT BIT +#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1) + +/* +* Used by MCDE to setup all necessary PRCMU registers +*/ +#define PRCMU_RESET_DSIPLL 0x00004000 +#define PRCMU_UNCLAMP_DSIPLL 0x00400800 + +/* HDMI CLK MGT PLLSW=001 (PLLSOC0), PLLDIV=0x8, = 50 Mhz*/ +#define PRCMU_DSI_CLOCK_SETTING 0x00000128 +/* TVCLK_MGT PLLSW=001 (PLLSOC0) PLLDIV=0x13, = 19.05 MHZ */ +#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000135 +#define PRCMU_PLLDSI_FREQ_SETTING 0x0004013C +#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000002 +#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x03000101 +#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00000101 + +#define PRCMU_ENABLE_PLLDSI 0x00000001 +#define PRCMU_DISABLE_PLLDSI 0x00000000 + +#define PRCMU_DSI_RESET_SW 0x00000003 + +#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3 + +/* + * mb0_transfer - state needed for mailbox 0 communication. + * @lock: The transaction lock. + */ +static struct { + spinlock_t lock; +} mb0_transfer; + +/* + * mb5_transfer - state needed for mailbox 5 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + * @ack: Reply ("acknowledge") data. + */ +static struct { + struct mutex lock; + struct completion work; + struct { + u8 header; + u8 status; + u8 value[4]; + } ack; +} mb5_transfer; + +/* PRCMU TCDM base IO address. */ +static __iomem void *tcdm_base; + +/** + * db5500_prcmu_abb_read() - Read register value(s) from the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The read out value(s). + * @size: The number of registers to read. + * + * Reads register value(s) from the ABB. + * @size has to be <= 4. + */ +int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if ((size < 1) || (4 < size)) + return -EINVAL; + + mutex_lock(&mb5_transfer.lock); + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + writeb(slave, PRCM_REQ_MB5_I2C_SLAVE); + writeb(reg, PRCM_REQ_MB5_I2C_REG); + writeb(size, PRCM_REQ_MB5_I2C_SIZE); + writeb(MB5H_I2C_READ, PRCM_REQ_MB5_HEADER); + + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); + wait_for_completion(&mb5_transfer.work); + + r = 0; + if ((mb5_transfer.ack.header == MB5H_I2C_READ) && + (mb5_transfer.ack.status == RC_SUCCESS)) + memcpy(value, mb5_transfer.ack.value, (size_t)size); + else + r = -EIO; + + mutex_unlock(&mb5_transfer.lock); + + return r; +} + +/** + * db5500_prcmu_abb_write() - Write register value(s) to the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The value(s) to write. + * @size: The number of registers to write. + * + * Writes register value(s) to the ABB. + * @size has to be <= 4. + */ +int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if ((size < 1) || (4 < size)) + return -EINVAL; + + mutex_lock(&mb5_transfer.lock); + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + writeb(slave, PRCM_REQ_MB5_I2C_SLAVE); + writeb(reg, PRCM_REQ_MB5_I2C_REG); + writeb(size, PRCM_REQ_MB5_I2C_SIZE); + memcpy_toio(PRCM_REQ_MB5_I2C_DATA, value, size); + writeb(MB5H_I2C_WRITE, PRCM_REQ_MB5_HEADER); + + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); + wait_for_completion(&mb5_transfer.work); + + if ((mb5_transfer.ack.header == MB5H_I2C_WRITE) && + (mb5_transfer.ack.status == RC_SUCCESS)) + r = 0; + else + r = -EIO; + + mutex_unlock(&mb5_transfer.lock); + + return r; +} + +int db5500_prcmu_enable_dsipll(void) +{ + int i; + + /* Enable DSIPLL_RESETN resets */ + writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR); + /* Unclamp DSIPLL in/out */ + writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR); + /* Set DSI PLL FREQ */ + writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ); + writel(PRCMU_DSI_PLLOUT_SEL_SETTING, + PRCM_DSI_PLLOUT_SEL); + /* Enable Escape clocks */ + writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV); + + /* Start DSI PLL */ + writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE); + /* Reset DSI PLL */ + writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET); + for (i = 0; i < 10; i++) { + if ((readl(PRCM_PLLDSI_LOCKP) & + PRCMU_PLLDSI_LOCKP_LOCKED) == PRCMU_PLLDSI_LOCKP_LOCKED) + break; + udelay(100); + } + /* Release DSIPLL_RESETN */ + writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET); + return 0; +} + +int db5500_prcmu_disable_dsipll(void) +{ + /* Disable dsi pll */ + writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE); + /* Disable escapeclock */ + writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV); + return 0; +} + +int db5500_prcmu_set_display_clocks(void) +{ + /* HDMI and TVCLK Should be handled somewhere else */ + /* PLLDIV=8, PLLSW=2, CLKEN=1 */ + writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT); + /* PLLDIV=14, PLLSW=2, CLKEN=1 */ + writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT); + return 0; +} + +static void ack_dbb_wakeup(void) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + cpu_relax(); + + writeb(RMB0H_RD_WAKE_UP_ACK, PRCM_REQ_MB0_HEADER); + writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); +} + +static inline void print_unknown_header_warning(u8 n, u8 header) +{ + pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n", + header, n); +} + +static bool read_mailbox_0(void) +{ + bool r; + u8 header; + + header = readb(PRCM_ACK_MB0_HEADER); + switch (header) { + case AMB0H_WAKE_UP: + r = true; + break; + default: + print_unknown_header_warning(0, header); + r = false; + break; + } + writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR); + return r; +} + +static bool read_mailbox_1(void) +{ + writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR); + return false; +} + +static bool read_mailbox_2(void) +{ + writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR); + return false; +} + +static bool read_mailbox_3(void) +{ + writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR); + return false; +} + +static bool read_mailbox_4(void) +{ + writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR); + return false; +} + +static bool read_mailbox_5(void) +{ + u8 header; + + header = readb(PRCM_ACK_MB5_HEADER); + switch (header) { + case MB5H_I2C_READ: + memcpy_fromio(mb5_transfer.ack.value, PRCM_ACK_MB5_I2C_DATA, 4); + case MB5H_I2C_WRITE: + mb5_transfer.ack.header = header; + mb5_transfer.ack.status = readb(PRCM_ACK_MB5_RETURN_CODE); + complete(&mb5_transfer.work); + break; + default: + print_unknown_header_warning(5, header); + break; + } + writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR); + return false; +} + +static bool read_mailbox_6(void) +{ + writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR); + return false; +} + +static bool read_mailbox_7(void) +{ + writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR); + return false; +} + +static bool (* const read_mailbox[NUM_MB])(void) = { + read_mailbox_0, + read_mailbox_1, + read_mailbox_2, + read_mailbox_3, + read_mailbox_4, + read_mailbox_5, + read_mailbox_6, + read_mailbox_7 +}; + +static irqreturn_t prcmu_irq_handler(int irq, void *data) +{ + u32 bits; + u8 n; + irqreturn_t r; + + bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS); + if (unlikely(!bits)) + return IRQ_NONE; + + r = IRQ_HANDLED; + for (n = 0; bits; n++) { + if (bits & MBOX_BIT(n)) { + bits -= MBOX_BIT(n); + if (read_mailbox[n]()) + r = IRQ_WAKE_THREAD; + } + } + return r; +} + +static irqreturn_t prcmu_irq_thread_fn(int irq, void *data) +{ + ack_dbb_wakeup(); + return IRQ_HANDLED; +} + +void __init db5500_prcmu_early_init(void) +{ + tcdm_base = __io_address(U5500_PRCMU_TCDM_BASE); + spin_lock_init(&mb0_transfer.lock); + mutex_init(&mb5_transfer.lock); + init_completion(&mb5_transfer.work); +} + +/** + * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic + * + */ +int __init db5500_prcmu_init(void) +{ + int r = 0; + + if (ux500_is_svp() || !cpu_is_u5500()) + return -ENODEV; + + /* Clean up the mailbox interrupts after pre-kernel code. */ + writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLEAR); + + r = request_threaded_irq(IRQ_DB5500_PRCMU1, prcmu_irq_handler, + prcmu_irq_thread_fn, 0, "prcmu", NULL); + if (r < 0) { + pr_err("prcmu: Failed to allocate IRQ_DB5500_PRCMU1.\n"); + return -EBUSY; + } + return 0; +} + +arch_initcall(db5500_prcmu_init); diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h new file mode 100644 index 000000000000..f0977986402c --- /dev/null +++ b/include/linux/mfd/db5500-prcmu.h @@ -0,0 +1,45 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * U5500 PRCMU API. + */ +#ifndef __MACH_PRCMU_U5500_H +#define __MACH_PRCMU_U5500_H + +#ifdef CONFIG_UX500_SOC_DB5500 + +void db5500_prcmu_early_init(void); + +int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); +int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); + +#else /* !CONFIG_UX500_SOC_DB5500 */ + +static inline void db5500_prcmu_early_init(void) +{ +} + +static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +{ + return -ENOSYS; +} + +static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + return -ENOSYS; +} + +#endif /* CONFIG_UX500_SOC_DB5500 */ + +static inline int db5500_prcmu_config_abb_event_readout(u32 abb_events) +{ +#ifdef CONFIG_MACH_U5500_SIMULATOR + return 0; +#else + return -1; +#endif +} + +#endif /* __MACH_PRCMU_U5500_H */ -- cgit v1.2.3 From 46936340c4e545f3be935b9d34e0554d16dbac30 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 15 May 2011 19:16:38 +0200 Subject: mach-ux500: move CPUfreq driver to cpufreq subsystem As part of the ARM arch subsystem migration, move the DB8500 cpufreq driver to drivers/cpufreq as discussed with Dave Jones. The Makefile is not updated in order to avoid cross-subsystem conflicts for this file in merges. Cc: Arnd Bergmann Acked-by: Dave Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpufreq.c | 210 --------------------------------------- drivers/cpufreq/db8500-cpufreq.c | 210 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 210 insertions(+), 210 deletions(-) delete mode 100644 arch/arm/mach-ux500/cpufreq.c create mode 100644 drivers/cpufreq/db8500-cpufreq.c (limited to 'arch/arm/mach-ux500') diff --git a/arch/arm/mach-ux500/cpufreq.c b/arch/arm/mach-ux500/cpufreq.c deleted file mode 100644 index d196939fcdb9..000000000000 --- a/arch/arm/mach-ux500/cpufreq.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * CPU frequency scaling for u8500 - * Inspired by linux/arch/arm/mach-davinci/cpufreq.c - * - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * - * Author: Sundar Iyer - * Author: Martin Persson - * Author: Jonas Aaberg - * - */ - -#include -#include -#include -#include -#include - -#include - -#define DRIVER_NAME "cpufreq-u8500" -#define CPUFREQ_NAME "u8500" - -static struct device *dev; - -static struct cpufreq_frequency_table freq_table[] = { - [0] = { - .index = 0, - .frequency = 200000, - }, - [1] = { - .index = 1, - .frequency = 300000, - }, - [2] = { - .index = 2, - .frequency = 600000, - }, - [3] = { - /* Used for CPU_OPP_MAX, if available */ - .index = 3, - .frequency = CPUFREQ_TABLE_END, - }, - [4] = { - .index = 4, - .frequency = CPUFREQ_TABLE_END, - }, -}; - -static enum prcmu_cpu_opp index2opp[] = { - CPU_OPP_EXT_CLK, - CPU_OPP_50, - CPU_OPP_100, - CPU_OPP_MAX -}; - -static int u8500_cpufreq_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, freq_table); -} - -static int u8500_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_freqs freqs; - unsigned int index; - int ret = 0; - - /* - * Ensure desired rate is within allowed range. Some govenors - * (ondemand) will just pass target_freq=0 to get the minimum. - */ - if (target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - if (target_freq > policy->cpuinfo.max_freq) - target_freq = policy->cpuinfo.max_freq; - - ret = cpufreq_frequency_table_target(policy, freq_table, - target_freq, relation, &index); - if (ret < 0) { - dev_err(dev, "Could not look up next frequency\n"); - return ret; - } - - freqs.old = policy->cur; - freqs.new = freq_table[index].frequency; - freqs.cpu = policy->cpu; - - if (freqs.old == freqs.new) { - dev_dbg(dev, "Current and target frequencies are equal\n"); - return 0; - } - - dev_dbg(dev, "transition: %u --> %u\n", freqs.old, freqs.new); - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - ret = prcmu_set_cpu_opp(index2opp[index]); - if (ret < 0) { - dev_err(dev, "Failed to set OPP level\n"); - return ret; - } - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return ret; -} - -static unsigned int u8500_cpufreq_getspeed(unsigned int cpu) -{ - int i; - - for (i = 0; prcmu_get_cpu_opp() != index2opp[i]; i++) - ; - return freq_table[i].frequency; -} - -static int __cpuinit u8500_cpu_init(struct cpufreq_policy *policy) -{ - int res; - - BUILD_BUG_ON(ARRAY_SIZE(index2opp) + 1 != ARRAY_SIZE(freq_table)); - - if (cpu_is_u8500v2()) { - freq_table[1].frequency = 400000; - freq_table[2].frequency = 800000; - if (prcmu_has_arm_maxopp()) - freq_table[3].frequency = 1000000; - } - - /* get policy fields based on the table */ - res = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (!res) - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - else { - dev_err(dev, "u8500-cpufreq : Failed to read policy table\n"); - return res; - } - - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - policy->cur = u8500_cpufreq_getspeed(policy->cpu); - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - /* - * FIXME : Need to take time measurement across the target() - * function with no/some/all drivers in the notification - * list. - */ - policy->cpuinfo.transition_latency = 200 * 1000; /* in ns */ - - /* policy sharing between dual CPUs */ - cpumask_copy(policy->cpus, &cpu_present_map); - - policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; - - return res; -} - -static struct freq_attr *u8500_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; -static int u8500_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct cpufreq_driver u8500_driver = { - .owner = THIS_MODULE, - .flags = CPUFREQ_STICKY, - .verify = u8500_cpufreq_verify_speed, - .target = u8500_cpufreq_target, - .get = u8500_cpufreq_getspeed, - .init = u8500_cpu_init, - .exit = u8500_cpu_exit, - .name = CPUFREQ_NAME, - .attr = u8500_cpufreq_attr, -}; - -static int __init u8500_cpufreq_probe(struct platform_device *pdev) -{ - dev = &pdev->dev; - return cpufreq_register_driver(&u8500_driver); -} - -static int __exit u8500_cpufreq_remove(struct platform_device *pdev) -{ - return cpufreq_unregister_driver(&u8500_driver); -} - -static struct platform_driver u8500_cpufreq_driver = { - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, - .remove = __exit_p(u8500_cpufreq_remove), -}; - -static int __init u8500_cpufreq_init(void) -{ - return platform_driver_probe(&u8500_cpufreq_driver, - &u8500_cpufreq_probe); -} - -device_initcall(u8500_cpufreq_init); diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c new file mode 100644 index 000000000000..d196939fcdb9 --- /dev/null +++ b/drivers/cpufreq/db8500-cpufreq.c @@ -0,0 +1,210 @@ +/* + * CPU frequency scaling for u8500 + * Inspired by linux/arch/arm/mach-davinci/cpufreq.c + * + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * Author: Sundar Iyer + * Author: Martin Persson + * Author: Jonas Aaberg + * + */ + +#include +#include +#include +#include +#include + +#include + +#define DRIVER_NAME "cpufreq-u8500" +#define CPUFREQ_NAME "u8500" + +static struct device *dev; + +static struct cpufreq_frequency_table freq_table[] = { + [0] = { + .index = 0, + .frequency = 200000, + }, + [1] = { + .index = 1, + .frequency = 300000, + }, + [2] = { + .index = 2, + .frequency = 600000, + }, + [3] = { + /* Used for CPU_OPP_MAX, if available */ + .index = 3, + .frequency = CPUFREQ_TABLE_END, + }, + [4] = { + .index = 4, + .frequency = CPUFREQ_TABLE_END, + }, +}; + +static enum prcmu_cpu_opp index2opp[] = { + CPU_OPP_EXT_CLK, + CPU_OPP_50, + CPU_OPP_100, + CPU_OPP_MAX +}; + +static int u8500_cpufreq_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, freq_table); +} + +static int u8500_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_freqs freqs; + unsigned int index; + int ret = 0; + + /* + * Ensure desired rate is within allowed range. Some govenors + * (ondemand) will just pass target_freq=0 to get the minimum. + */ + if (target_freq < policy->cpuinfo.min_freq) + target_freq = policy->cpuinfo.min_freq; + if (target_freq > policy->cpuinfo.max_freq) + target_freq = policy->cpuinfo.max_freq; + + ret = cpufreq_frequency_table_target(policy, freq_table, + target_freq, relation, &index); + if (ret < 0) { + dev_err(dev, "Could not look up next frequency\n"); + return ret; + } + + freqs.old = policy->cur; + freqs.new = freq_table[index].frequency; + freqs.cpu = policy->cpu; + + if (freqs.old == freqs.new) { + dev_dbg(dev, "Current and target frequencies are equal\n"); + return 0; + } + + dev_dbg(dev, "transition: %u --> %u\n", freqs.old, freqs.new); + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + ret = prcmu_set_cpu_opp(index2opp[index]); + if (ret < 0) { + dev_err(dev, "Failed to set OPP level\n"); + return ret; + } + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return ret; +} + +static unsigned int u8500_cpufreq_getspeed(unsigned int cpu) +{ + int i; + + for (i = 0; prcmu_get_cpu_opp() != index2opp[i]; i++) + ; + return freq_table[i].frequency; +} + +static int __cpuinit u8500_cpu_init(struct cpufreq_policy *policy) +{ + int res; + + BUILD_BUG_ON(ARRAY_SIZE(index2opp) + 1 != ARRAY_SIZE(freq_table)); + + if (cpu_is_u8500v2()) { + freq_table[1].frequency = 400000; + freq_table[2].frequency = 800000; + if (prcmu_has_arm_maxopp()) + freq_table[3].frequency = 1000000; + } + + /* get policy fields based on the table */ + res = cpufreq_frequency_table_cpuinfo(policy, freq_table); + if (!res) + cpufreq_frequency_table_get_attr(freq_table, policy->cpu); + else { + dev_err(dev, "u8500-cpufreq : Failed to read policy table\n"); + return res; + } + + policy->min = policy->cpuinfo.min_freq; + policy->max = policy->cpuinfo.max_freq; + policy->cur = u8500_cpufreq_getspeed(policy->cpu); + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + /* + * FIXME : Need to take time measurement across the target() + * function with no/some/all drivers in the notification + * list. + */ + policy->cpuinfo.transition_latency = 200 * 1000; /* in ns */ + + /* policy sharing between dual CPUs */ + cpumask_copy(policy->cpus, &cpu_present_map); + + policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; + + return res; +} + +static struct freq_attr *u8500_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; +static int u8500_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static struct cpufreq_driver u8500_driver = { + .owner = THIS_MODULE, + .flags = CPUFREQ_STICKY, + .verify = u8500_cpufreq_verify_speed, + .target = u8500_cpufreq_target, + .get = u8500_cpufreq_getspeed, + .init = u8500_cpu_init, + .exit = u8500_cpu_exit, + .name = CPUFREQ_NAME, + .attr = u8500_cpufreq_attr, +}; + +static int __init u8500_cpufreq_probe(struct platform_device *pdev) +{ + dev = &pdev->dev; + return cpufreq_register_driver(&u8500_driver); +} + +static int __exit u8500_cpufreq_remove(struct platform_device *pdev) +{ + return cpufreq_unregister_driver(&u8500_driver); +} + +static struct platform_driver u8500_cpufreq_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .remove = __exit_p(u8500_cpufreq_remove), +}; + +static int __init u8500_cpufreq_init(void) +{ + return platform_driver_probe(&u8500_cpufreq_driver, + &u8500_cpufreq_probe); +} + +device_initcall(u8500_cpufreq_init); -- cgit v1.2.3 From 1032fbfd792f2b384ac16a63993b8fae5eea9083 Mon Sep 17 00:00:00 2001 From: Bengt Jonsson Date: Fri, 1 Apr 2011 14:43:33 +0200 Subject: mach-ux500: voltage domain regulators for DB8500 The DB8500 has ePOD:s (electronic power domains) which are possible to switch on/off to deactivate silicon blocks on the DB8500 SoC by cutting their power without retention. We model these as simple regulators with one bit on/off settings. Acked-by: Liam Girdwood Acked-by: Mark Brown Signed-off-by: Bengt Jonsson Signed-off-by: Sundar Iyer Signed-off-by: Jonas Aberg Signed-off-by: Virupax Sadashivpetimath Signed-off-by: Martin Persson Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + drivers/mfd/db8500-prcmu.c | 179 +++++++++++ drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/db8500-prcmu.c | 558 +++++++++++++++++++++++++++++++++ include/linux/regulator/db8500-prcmu.h | 45 +++ 6 files changed, 791 insertions(+) create mode 100644 drivers/regulator/db8500-prcmu.c create mode 100644 include/linux/regulator/db8500-prcmu.h (limited to 'arch/arm/mach-ux500') diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 365c4c35faa7..54429d015954 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -17,6 +17,7 @@ config UX500_SOC_DB5500 config UX500_SOC_DB8500 bool "DB8500" select MFD_DB8500_PRCMU + select REGULATOR_DB8500_PRCMU endmenu diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index c44725bd8b9a..e63782107e2f 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -28,6 +28,8 @@ #include #include #include +#include +#include #include #include #include @@ -1824,9 +1826,186 @@ void __init prcmu_early_init(void) } } +/* + * Power domain switches (ePODs) modeled as regulators for the DB8500 SoC + */ +static struct regulator_consumer_supply db8500_vape_consumers[] = { + REGULATOR_SUPPLY("v-ape", NULL), + REGULATOR_SUPPLY("v-i2c", "nmk-i2c.0"), + REGULATOR_SUPPLY("v-i2c", "nmk-i2c.1"), + REGULATOR_SUPPLY("v-i2c", "nmk-i2c.2"), + REGULATOR_SUPPLY("v-i2c", "nmk-i2c.3"), + /* "v-mmc" changed to "vcore" in the mainline kernel */ + REGULATOR_SUPPLY("vcore", "sdi0"), + REGULATOR_SUPPLY("vcore", "sdi1"), + REGULATOR_SUPPLY("vcore", "sdi2"), + REGULATOR_SUPPLY("vcore", "sdi3"), + REGULATOR_SUPPLY("vcore", "sdi4"), + REGULATOR_SUPPLY("v-dma", "dma40.0"), + REGULATOR_SUPPLY("v-ape", "ab8500-usb.0"), + /* "v-uart" changed to "vcore" in the mainline kernel */ + REGULATOR_SUPPLY("vcore", "uart0"), + REGULATOR_SUPPLY("vcore", "uart1"), + REGULATOR_SUPPLY("vcore", "uart2"), + REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"), +}; + +static struct regulator_consumer_supply db8500_vsmps2_consumers[] = { + /* CG2900 and CW1200 power to off-chip peripherals */ + REGULATOR_SUPPLY("gbf_1v8", "cg2900-uart.0"), + REGULATOR_SUPPLY("wlan_1v8", "cw1200.0"), + REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"), + /* AV8100 regulator */ + REGULATOR_SUPPLY("hdmi_1v8", "0-0070"), +}; + +static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = { + REGULATOR_SUPPLY("vsupply", "b2r2.0"), + REGULATOR_SUPPLY("vsupply", "mcde.0"), +}; + +static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { + [DB8500_REGULATOR_VAPE] = { + .constraints = { + .name = "db8500-vape", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = db8500_vape_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers), + }, + [DB8500_REGULATOR_VARM] = { + .constraints = { + .name = "db8500-varm", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_VMODEM] = { + .constraints = { + .name = "db8500-vmodem", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_VPLL] = { + .constraints = { + .name = "db8500-vpll", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_VSMPS1] = { + .constraints = { + .name = "db8500-vsmps1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_VSMPS2] = { + .constraints = { + .name = "db8500-vsmps2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = db8500_vsmps2_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_vsmps2_consumers), + }, + [DB8500_REGULATOR_VSMPS3] = { + .constraints = { + .name = "db8500-vsmps3", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_VRF1] = { + .constraints = { + .name = "db8500-vrf1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SVAMMDSP] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-sva-mmdsp", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = { + .constraints = { + /* "ret" means "retention" */ + .name = "db8500-sva-mmdsp-ret", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SVAPIPE] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-sva-pipe", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SIAMMDSP] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-sia-mmdsp", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = { + .constraints = { + .name = "db8500-sia-mmdsp-ret", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SIAPIPE] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-sia-pipe", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_SGA] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-sga", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_B2R2_MCDE] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-b2r2-mcde", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = db8500_b2r2_mcde_consumers, + .num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers), + }, + [DB8500_REGULATOR_SWITCH_ESRAM12] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-esram12", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_ESRAM12RET] = { + .constraints = { + .name = "db8500-esram12-ret", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_ESRAM34] = { + .supply_regulator = "db8500-vape", + .constraints = { + .name = "db8500-esram34", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, + [DB8500_REGULATOR_SWITCH_ESRAM34RET] = { + .constraints = { + .name = "db8500-esram34-ret", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + }, +}; + static struct mfd_cell db8500_prcmu_devs[] = { { .name = "db8500-prcmu-regulators", + .mfd_data = &db8500_regulators, }, { .name = "cpufreq-u8500", diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index b9f29e0d4295..f0b13a0d1851 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -274,6 +274,13 @@ config REGULATOR_AB8500 This driver supports the regulators found on the ST-Ericsson mixed signal AB8500 PMIC +config REGULATOR_DB8500_PRCMU + bool "ST-Ericsson DB8500 Voltage Domain Regulators" + depends on MFD_DB8500_PRCMU + help + This driver supports the voltage domain regulators controlled by the + DB8500 PRCMU + config REGULATOR_TPS6586X tristate "TI TPS6586X Power regulators" depends on MFD_TPS6586X diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index d72a42756778..165ff5371e9e 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -41,5 +41,6 @@ obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o +obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c new file mode 100644 index 000000000000..1089a961616e --- /dev/null +++ b/drivers/regulator/db8500-prcmu.c @@ -0,0 +1,558 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Authors: Sundar Iyer for ST-Ericsson + * Bengt Jonsson for ST-Ericsson + * + * Power domain regulators on DB8500 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * power state reference count + */ +static int power_state_active_cnt; /* will initialize to zero */ +static DEFINE_SPINLOCK(power_state_active_lock); + +static void power_state_active_enable(void) +{ + unsigned long flags; + + spin_lock_irqsave(&power_state_active_lock, flags); + power_state_active_cnt++; + spin_unlock_irqrestore(&power_state_active_lock, flags); +} + +static int power_state_active_disable(void) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&power_state_active_lock, flags); + if (power_state_active_cnt <= 0) { + pr_err("power state: unbalanced enable/disable calls\n"); + ret = -EINVAL; + goto out; + } + + power_state_active_cnt--; +out: + spin_unlock_irqrestore(&power_state_active_lock, flags); + return ret; +} + +/* + * Exported interface for CPUIdle only. This function is called when interrupts + * are turned off. Hence, no locking. + */ +int power_state_active_is_enabled(void) +{ + return (power_state_active_cnt > 0); +} + +/** + * struct db8500_regulator_info - db8500 regulator information + * @dev: device pointer + * @desc: regulator description + * @rdev: regulator device pointer + * @is_enabled: status of the regulator + * @epod_id: id for EPOD (power domain) + * @is_ramret: RAM retention switch for EPOD (power domain) + * @operating_point: operating point (only for vape, to be removed) + * + */ +struct db8500_regulator_info { + struct device *dev; + struct regulator_desc desc; + struct regulator_dev *rdev; + bool is_enabled; + u16 epod_id; + bool is_ramret; + bool exclude_from_power_state; + unsigned int operating_point; +}; + +static int db8500_regulator_enable(struct regulator_dev *rdev) +{ + struct db8500_regulator_info *info = rdev_get_drvdata(rdev); + + if (info == NULL) + return -EINVAL; + + dev_vdbg(rdev_get_dev(rdev), "regulator-%s-enable\n", + info->desc.name); + + info->is_enabled = true; + if (!info->exclude_from_power_state) + power_state_active_enable(); + + return 0; +} + +static int db8500_regulator_disable(struct regulator_dev *rdev) +{ + struct db8500_regulator_info *info = rdev_get_drvdata(rdev); + int ret = 0; + + if (info == NULL) + return -EINVAL; + + dev_vdbg(rdev_get_dev(rdev), "regulator-%s-disable\n", + info->desc.name); + + info->is_enabled = false; + if (!info->exclude_from_power_state) + ret = power_state_active_disable(); + + return ret; +} + +static int db8500_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct db8500_regulator_info *info = rdev_get_drvdata(rdev); + + if (info == NULL) + return -EINVAL; + + dev_vdbg(rdev_get_dev(rdev), "regulator-%s-is_enabled (is_enabled):" + " %i\n", info->desc.name, info->is_enabled); + + return info->is_enabled; +} + +/* db8500 regulator operations */ +static struct regulator_ops db8500_regulator_ops = { + .enable = db8500_regulator_enable, + .disable = db8500_regulator_disable, + .is_enabled = db8500_regulator_is_enabled, +}; + +/* + * EPOD control + */ +static bool epod_on[NUM_EPOD_ID]; +static bool epod_ramret[NUM_EPOD_ID]; + +static int enable_epod(u16 epod_id, bool ramret) +{ + int ret; + + if (ramret) { + if (!epod_on[epod_id]) { + ret = prcmu_set_epod(epod_id, EPOD_STATE_RAMRET); + if (ret < 0) + return ret; + } + epod_ramret[epod_id] = true; + } else { + ret = prcmu_set_epod(epod_id, EPOD_STATE_ON); + if (ret < 0) + return ret; + epod_on[epod_id] = true; + } + + return 0; +} + +static int disable_epod(u16 epod_id, bool ramret) +{ + int ret; + + if (ramret) { + if (!epod_on[epod_id]) { + ret = prcmu_set_epod(epod_id, EPOD_STATE_OFF); + if (ret < 0) + return ret; + } + epod_ramret[epod_id] = false; + } else { + if (epod_ramret[epod_id]) { + ret = prcmu_set_epod(epod_id, EPOD_STATE_RAMRET); + if (ret < 0) + return ret; + } else { + ret = prcmu_set_epod(epod_id, EPOD_STATE_OFF); + if (ret < 0) + return ret; + } + epod_on[epod_id] = false; + } + + return 0; +} + +/* + * Regulator switch + */ +static int db8500_regulator_switch_enable(struct regulator_dev *rdev) +{ + struct db8500_regulator_info *info = rdev_get_drvdata(rdev); + int ret; + + if (info == NULL) + return -EINVAL; + + dev_vdbg(rdev_get_dev(rdev), "regulator-switch-%s-enable\n", + info->desc.name); + + ret = enable_epod(info->epod_id, info->is_ramret); + if (ret < 0) { + dev_err(rdev_get_dev(rdev), + "regulator-switch-%s-enable: prcmu call failed\n", + info->desc.name); + goto out; + } + + info->is_enabled = true; +out: + return ret; +} + +static int db8500_regulator_switch_disable(struct regulator_dev *rdev) +{ + struct db8500_regulator_info *info = rdev_get_drvdata(rdev); + int ret; + + if (info == NULL) + return -EINVAL; + + dev_vdbg(rdev_get_dev(rdev), "regulator-switch-%s-disable\n", + info->desc.name); + + ret = disable_epod(info->epod_id, info->is_ramret); + if (ret < 0) { + dev_err(rdev_get_dev(rdev), + "regulator_switch-%s-disable: prcmu call failed\n", + info->desc.name); + goto out; + } + + info->is_enabled = 0; +out: + return ret; +} + +static int db8500_regulator_switch_is_enabled(struct regulator_dev *rdev) +{ + struct db8500_regulator_info *info = rdev_get_drvdata(rdev); + + if (info == NULL) + return -EINVAL; + + dev_vdbg(rdev_get_dev(rdev), + "regulator-switch-%s-is_enabled (is_enabled): %i\n", + info->desc.name, info->is_enabled); + + return info->is_enabled; +} + +static struct regulator_ops db8500_regulator_switch_ops = { + .enable = db8500_regulator_switch_enable, + .disable = db8500_regulator_switch_disable, + .is_enabled = db8500_regulator_switch_is_enabled, +}; + +/* + * Regulator information + */ +static struct db8500_regulator_info + db8500_regulator_info[DB8500_NUM_REGULATORS] = { + [DB8500_REGULATOR_VAPE] = { + .desc = { + .name = "db8500-vape", + .id = DB8500_REGULATOR_VAPE, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_VARM] = { + .desc = { + .name = "db8500-varm", + .id = DB8500_REGULATOR_VARM, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_VMODEM] = { + .desc = { + .name = "db8500-vmodem", + .id = DB8500_REGULATOR_VMODEM, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_VPLL] = { + .desc = { + .name = "db8500-vpll", + .id = DB8500_REGULATOR_VPLL, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_VSMPS1] = { + .desc = { + .name = "db8500-vsmps1", + .id = DB8500_REGULATOR_VSMPS1, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_VSMPS2] = { + .desc = { + .name = "db8500-vsmps2", + .id = DB8500_REGULATOR_VSMPS2, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .exclude_from_power_state = true, + }, + [DB8500_REGULATOR_VSMPS3] = { + .desc = { + .name = "db8500-vsmps3", + .id = DB8500_REGULATOR_VSMPS3, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_VRF1] = { + .desc = { + .name = "db8500-vrf1", + .id = DB8500_REGULATOR_VRF1, + .ops = &db8500_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + }, + [DB8500_REGULATOR_SWITCH_SVAMMDSP] = { + .desc = { + .name = "db8500-sva-mmdsp", + .id = DB8500_REGULATOR_SWITCH_SVAMMDSP, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SVAMMDSP, + }, + [DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = { + .desc = { + .name = "db8500-sva-mmdsp-ret", + .id = DB8500_REGULATOR_SWITCH_SVAMMDSPRET, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SVAMMDSP, + .is_ramret = true, + }, + [DB8500_REGULATOR_SWITCH_SVAPIPE] = { + .desc = { + .name = "db8500-sva-pipe", + .id = DB8500_REGULATOR_SWITCH_SVAPIPE, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SVAPIPE, + }, + [DB8500_REGULATOR_SWITCH_SIAMMDSP] = { + .desc = { + .name = "db8500-sia-mmdsp", + .id = DB8500_REGULATOR_SWITCH_SIAMMDSP, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SIAMMDSP, + }, + [DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = { + .desc = { + .name = "db8500-sia-mmdsp-ret", + .id = DB8500_REGULATOR_SWITCH_SIAMMDSPRET, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SIAMMDSP, + .is_ramret = true, + }, + [DB8500_REGULATOR_SWITCH_SIAPIPE] = { + .desc = { + .name = "db8500-sia-pipe", + .id = DB8500_REGULATOR_SWITCH_SIAPIPE, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SIAPIPE, + }, + [DB8500_REGULATOR_SWITCH_SGA] = { + .desc = { + .name = "db8500-sga", + .id = DB8500_REGULATOR_SWITCH_SGA, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_SGA, + }, + [DB8500_REGULATOR_SWITCH_B2R2_MCDE] = { + .desc = { + .name = "db8500-b2r2-mcde", + .id = DB8500_REGULATOR_SWITCH_B2R2_MCDE, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_B2R2_MCDE, + }, + [DB8500_REGULATOR_SWITCH_ESRAM12] = { + .desc = { + .name = "db8500-esram12", + .id = DB8500_REGULATOR_SWITCH_ESRAM12, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_ESRAM12, + .is_enabled = true, + }, + [DB8500_REGULATOR_SWITCH_ESRAM12RET] = { + .desc = { + .name = "db8500-esram12-ret", + .id = DB8500_REGULATOR_SWITCH_ESRAM12RET, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_ESRAM12, + .is_ramret = true, + }, + [DB8500_REGULATOR_SWITCH_ESRAM34] = { + .desc = { + .name = "db8500-esram34", + .id = DB8500_REGULATOR_SWITCH_ESRAM34, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_ESRAM34, + .is_enabled = true, + }, + [DB8500_REGULATOR_SWITCH_ESRAM34RET] = { + .desc = { + .name = "db8500-esram34-ret", + .id = DB8500_REGULATOR_SWITCH_ESRAM34RET, + .ops = &db8500_regulator_switch_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + .epod_id = EPOD_ID_ESRAM34, + .is_ramret = true, + }, +}; + +static int __devinit db8500_regulator_probe(struct platform_device *pdev) +{ + struct regulator_init_data *db8500_init_data = mfd_get_data(pdev); + int i, err; + + /* register all regulators */ + for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) { + struct db8500_regulator_info *info; + struct regulator_init_data *init_data = &db8500_init_data[i]; + + /* assign per-regulator data */ + info = &db8500_regulator_info[i]; + info->dev = &pdev->dev; + + /* register with the regulator framework */ + info->rdev = regulator_register(&info->desc, &pdev->dev, + init_data, info); + if (IS_ERR(info->rdev)) { + err = PTR_ERR(info->rdev); + dev_err(&pdev->dev, "failed to register %s: err %i\n", + info->desc.name, err); + + /* if failing, unregister all earlier regulators */ + i--; + while (i >= 0) { + info = &db8500_regulator_info[i]; + regulator_unregister(info->rdev); + i--; + } + return err; + } + + dev_dbg(rdev_get_dev(info->rdev), + "regulator-%s-probed\n", info->desc.name); + } + + return 0; +} + +static int __exit db8500_regulator_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) { + struct db8500_regulator_info *info; + info = &db8500_regulator_info[i]; + + dev_vdbg(rdev_get_dev(info->rdev), + "regulator-%s-remove\n", info->desc.name); + + regulator_unregister(info->rdev); + } + + return 0; +} + +static struct platform_driver db8500_regulator_driver = { + .driver = { + .name = "db8500-prcmu-regulators", + .owner = THIS_MODULE, + }, + .probe = db8500_regulator_probe, + .remove = __exit_p(db8500_regulator_remove), +}; + +static int __init db8500_regulator_init(void) +{ + int ret; + + ret = platform_driver_register(&db8500_regulator_driver); + if (ret < 0) + return -ENODEV; + + return 0; +} + +static void __exit db8500_regulator_exit(void) +{ + platform_driver_unregister(&db8500_regulator_driver); +} + +arch_initcall(db8500_regulator_init); +module_exit(db8500_regulator_exit); + +MODULE_AUTHOR("STMicroelectronics/ST-Ericsson"); +MODULE_DESCRIPTION("DB8500 regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/regulator/db8500-prcmu.h b/include/linux/regulator/db8500-prcmu.h new file mode 100644 index 000000000000..612062313b68 --- /dev/null +++ b/include/linux/regulator/db8500-prcmu.h @@ -0,0 +1,45 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * Author: Bengt Jonsson for ST-Ericsson + * + * Interface to power domain regulators on DB8500 + */ + +#ifndef __REGULATOR_H__ +#define __REGULATOR_H__ + +/* Number of DB8500 regulators and regulator enumeration */ +enum db8500_regulator_id { + DB8500_REGULATOR_VAPE, + DB8500_REGULATOR_VARM, + DB8500_REGULATOR_VMODEM, + DB8500_REGULATOR_VPLL, + DB8500_REGULATOR_VSMPS1, + DB8500_REGULATOR_VSMPS2, + DB8500_REGULATOR_VSMPS3, + DB8500_REGULATOR_VRF1, + DB8500_REGULATOR_SWITCH_SVAMMDSP, + DB8500_REGULATOR_SWITCH_SVAMMDSPRET, + DB8500_REGULATOR_SWITCH_SVAPIPE, + DB8500_REGULATOR_SWITCH_SIAMMDSP, + DB8500_REGULATOR_SWITCH_SIAMMDSPRET, + DB8500_REGULATOR_SWITCH_SIAPIPE, + DB8500_REGULATOR_SWITCH_SGA, + DB8500_REGULATOR_SWITCH_B2R2_MCDE, + DB8500_REGULATOR_SWITCH_ESRAM12, + DB8500_REGULATOR_SWITCH_ESRAM12RET, + DB8500_REGULATOR_SWITCH_ESRAM34, + DB8500_REGULATOR_SWITCH_ESRAM34RET, + DB8500_NUM_REGULATORS +}; + +/* + * Exported interface for CPUIdle only. This function is called with all + * interrupts turned off. + */ +int power_state_active_is_enabled(void); + +#endif -- cgit v1.2.3