From df83d907348b41f40da83b267242b5dca041d4ef Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 27 Mar 2013 11:55:35 +0100 Subject: ARM: shmobile: marzen: Add Display Unit support Support the DU0 VGA and DU1 LVDS outputs. DU1 is connected to a Mitsubishi AA104XD12 panel (10.4" XGA). Signed-off-by: Laurent Pinchart Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-marzen.c | 72 +++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 3f5044fda4e3..434b213cc738 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -169,6 +170,63 @@ static struct platform_device hspi_device = { .num_resources = ARRAY_SIZE(hspi_resources), }; +/* + * DU + * + * The panel only specifies the [hv]display and [hv]total values. The position + * and width of the sync pulses don't matter, they're copied from VESA timings. + */ +static struct rcar_du_encoder_data du_encoders[] = { + { + .type = RCAR_DU_ENCODER_VGA, + .output = RCAR_DU_OUTPUT_DPAD0, + }, { + .type = RCAR_DU_ENCODER_LVDS, + .output = RCAR_DU_OUTPUT_DPAD1, + .connector.lvds.panel = { + .width_mm = 210, + .height_mm = 158, + .mode = { + .clock = 65000, + .hdisplay = 1024, + .hsync_start = 1048, + .hsync_end = 1184, + .htotal = 1344, + .vdisplay = 768, + .vsync_start = 771, + .vsync_end = 777, + .vtotal = 806, + .flags = 0, + }, + }, + }, +}; + +static const struct rcar_du_platform_data du_pdata __initconst = { + .encoders = du_encoders, + .num_encoders = ARRAY_SIZE(du_encoders), +}; + +static const struct resource du_resources[] __initconst = { + DEFINE_RES_MEM(0xfff80000, 0x40000), + DEFINE_RES_IRQ(gic_iid(0x3f)), +}; + +static void __init marzen_add_du_device(void) +{ + struct platform_device_info info = { + .name = "rcar-du-r8a7779", + .id = -1, + .res = du_resources, + .num_res = ARRAY_SIZE(du_resources), + .data = &du_pdata, + .size_data = sizeof(du_pdata), + .dma_mask = DMA_BIT_MASK(32), + }; + + platform_device_register_full(&info); +} + /* LEDS */ static struct gpio_led marzen_leds[] = { { @@ -237,6 +295,19 @@ static struct platform_device *marzen_devices[] __initdata = { }; static const struct pinctrl_map marzen_pinctrl_map[] = { + /* DU (CN10: ARGB0, CN13: LVDS) */ + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", + "du0_rgb888", "du0"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", + "du0_sync_1", "du0"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", + "du0_clk_out_0", "du0"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", + "du1_rgb666", "du1"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", + "du1_sync_1", "du1"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779", + "du1_clk_out", "du1"), /* HSPI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779", "hspi0", "hspi0"), @@ -297,6 +368,7 @@ static void __init marzen_init(void) r8a7779_add_vin_device(1, &vin_platform_data); r8a7779_add_vin_device(3, &vin_platform_data); platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); + marzen_add_du_device(); } static const char *marzen_boards_compat_dt[] __initdata = { -- cgit v1.2.3 From c75a5afa44e71c99e1793824121608f0db48f014 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 16 Apr 2013 12:39:11 +0200 Subject: ARM: shmobile: lager: Add Display Unit support Only the VGA output is currently supported. Signed-off-by: Laurent Pinchart Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-lager.c | 66 ++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index ffb6f0ac7606..caec99e332ef 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -38,6 +39,62 @@ #include #include +/* DU */ +static struct rcar_du_encoder_data lager_du_encoders[] = { + { + .type = RCAR_DU_ENCODER_VGA, + .output = RCAR_DU_OUTPUT_DPAD0, + }, { + .type = RCAR_DU_ENCODER_NONE, + .output = RCAR_DU_OUTPUT_LVDS1, + .connector.lvds.panel = { + .width_mm = 210, + .height_mm = 158, + .mode = { + .clock = 65000, + .hdisplay = 1024, + .hsync_start = 1048, + .hsync_end = 1184, + .htotal = 1344, + .vdisplay = 768, + .vsync_start = 771, + .vsync_end = 777, + .vtotal = 806, + .flags = 0, + }, + }, + }, +}; + +static const struct rcar_du_platform_data lager_du_pdata __initconst = { + .encoders = lager_du_encoders, + .num_encoders = ARRAY_SIZE(lager_du_encoders), +}; + +static const struct resource du_resources[] __initconst = { + DEFINE_RES_MEM(0xfeb00000, 0x70000), + DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"), + DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"), + DEFINE_RES_IRQ(gic_spi(256)), + DEFINE_RES_IRQ(gic_spi(268)), + DEFINE_RES_IRQ(gic_spi(269)), +}; + +static void __init lager_add_du_device(void) +{ + struct platform_device_info info = { + .name = "rcar-du-r8a7790", + .id = -1, + .res = du_resources, + .num_res = ARRAY_SIZE(du_resources), + .data = &du_resources, + .size_data = sizeof(du_resources), + .dma_mask = DMA_BIT_MASK(32), + }; + + platform_device_register_full(&info); +} + /* LEDS */ static struct gpio_led lager_leds[] = { { @@ -106,6 +163,13 @@ static struct resource ether_resources[] __initdata = { }; static const struct pinctrl_map lager_pinctrl_map[] = { + /* DU (CN10: ARGB0, CN13: LVDS) */ + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790", + "du_rgb666", "du"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790", + "du_sync_1", "du"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790", + "du_clk_out_0", "du"), /* SCIF0 (CN19: DEBUG SERIAL0) */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790", "scif0_data", "scif0"), @@ -153,6 +217,8 @@ static void __init lager_add_standard_devices(void) ether_resources, ARRAY_SIZE(ether_resources), ðer_pdata, sizeof(ether_pdata)); + + lager_add_du_device(); } static const char *lager_boards_compat_dt[] __initdata = { -- cgit v1.2.3 From 8b98126d2ce701c7367deee60739904e17864523 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 1 Aug 2013 09:41:20 +0200 Subject: ARM: shmobile: ape6evm: update MMC0, SDHI0 and SDHI1 with correct regulators Currently a dummy fixed always-on regulator is used for all 3 SD/MMC interfaces on ape6evm. This patch updates the board to use correct supplies for MMC0, SDHI0 and SDHI1 VDD. SDHI0 VccQ supply regulator should be implemented in a separate patch. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-ape6evm.c | 54 +++++++++++++++++++++++++++++----- 1 file changed, 46 insertions(+), 8 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index 24b87eea9da3..02be420ebd1e 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -113,16 +113,49 @@ static const struct smsc911x_platform_config lan9220_data __initconst = { }; /* - * On APE6EVM power is supplied to MMCIF by a tps80032 regulator. For now we - * model a VDD supply to MMCIF, using a fixed 3.3V regulator. Also use the - * static power supply for SDHI0 and SDHI1, whereas SDHI0's VccQ is also - * supplied by the same tps80032 regulator and thus can also be adjusted - * dynamically. + * MMC0 power supplies: + * Both Vcc and VccQ to eMMC on APE6EVM are supplied by a tps80032 voltage + * regulator. Until support for it is added to this file we simulate the + * Vcc supply by a fixed always-on regulator */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = +static struct regulator_consumer_supply vcc_mmc0_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), +}; + +/* + * SDHI0 power supplies: + * Vcc to SDHI0 on APE6EVM is supplied by a GPIO-switchable regulator. VccQ is + * provided by the same tps80032 regulator as both MMC0 voltages - see comment + * above + */ +static struct regulator_consumer_supply vcc_sdhi0_consumers[] = +{ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vcc_sdhi0_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), + .consumer_supplies = vcc_sdhi0_consumers, +}; + +static const struct fixed_voltage_config vcc_sdhi0_info __initconst = { + .supply_name = "SDHI0 Vcc", + .microvolts = 3300000, + .gpio = 76, + .enable_high = 1, + .init_data = &vcc_sdhi0_init_data, +}; + +/* + * SDHI1 power supplies: + * Vcc and VccQ to SDHI1 on APE6EVM are both fixed at 3.3V + */ +static struct regulator_consumer_supply vcc_sdhi1_consumers[] = +{ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), }; @@ -215,14 +248,19 @@ static void __init ape6evm_add_standard_devices(void) platform_device_register_resndata(&platform_bus, "smsc911x", -1, lan9220_res, ARRAY_SIZE(lan9220_res), &lan9220_data, sizeof(lan9220_data)); - regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + + regulator_register_always_on(1, "MMC0 Vcc", vcc_mmc0_consumers, + ARRAY_SIZE(vcc_mmc0_consumers), 2800000); platform_device_register_resndata(&platform_bus, "sh_mmcif", 0, mmcif0_resources, ARRAY_SIZE(mmcif0_resources), &mmcif0_pdata, sizeof(mmcif0_pdata)); + platform_device_register_data(&platform_bus, "reg-fixed-voltage", 2, + &vcc_sdhi0_info, sizeof(vcc_sdhi0_info)); platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0, sdhi0_resources, ARRAY_SIZE(sdhi0_resources), &sdhi0_pdata, sizeof(sdhi0_pdata)); + regulator_register_always_on(3, "SDHI1 Vcc", vcc_sdhi1_consumers, + ARRAY_SIZE(vcc_sdhi1_consumers), 3300000); platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1, sdhi1_resources, ARRAY_SIZE(sdhi1_resources), &sdhi1_pdata, sizeof(sdhi1_pdata)); -- cgit v1.2.3 From 37bf8103c51a1508d6323de19a7ae1c13c3ed3f5 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 22 Aug 2013 17:55:08 +0200 Subject: ARM: shmobile: lager: Fix Display Unit platform data The DU device erroneously receives the DU resources array as platform data instead of the DU platform data structure. Fix it. This problem was introduced by f631fa0 ("ARM: shmobile: lager: Add Display Unit support"). Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-lager.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index caec99e332ef..9fbbf23244a8 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -87,8 +87,8 @@ static void __init lager_add_du_device(void) .id = -1, .res = du_resources, .num_res = ARRAY_SIZE(du_resources), - .data = &du_resources, - .size_data = sizeof(du_resources), + .data = &lager_du_pdata, + .size_data = sizeof(lager_du_pdata), .dma_mask = DMA_BIT_MASK(32), }; -- cgit v1.2.3 From 71d7472f63385f4f6fb7c8548450b2e4665dc542 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 26 Aug 2013 01:52:23 -0700 Subject: ARM: shmobile: bockw: enable global use of FPGA This patch enables global use of FPGA, since it will be used from many devices. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-bockw.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index 6b9faf3908f7..b998c6b2a270 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -38,6 +38,10 @@ #include #include +#define FPGA 0x18200000 +#define IRQ0MR 0x30 +static void __iomem *fpga; + /* * CN9(Upper side) SCIF/RCAN selection * @@ -224,8 +228,6 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { "vin1_data8", "vin1"), }; -#define FPGA 0x18200000 -#define IRQ0MR 0x30 #define PFC 0xfffc0000 #define PUPR4 0x110 static void __init bockw_init(void) @@ -269,8 +271,8 @@ static void __init bockw_init(void) /* for SMSC */ - base = ioremap_nocache(FPGA, SZ_1M); - if (base) { + fpga = ioremap_nocache(FPGA, SZ_1M); + if (fpga) { /* * CAUTION * @@ -278,10 +280,9 @@ static void __init bockw_init(void) * it should be cared in the future * Now, it is assuming IRQ0 was used only from SMSC. */ - u16 val = ioread16(base + IRQ0MR); + u16 val = ioread16(fpga + IRQ0MR); val &= ~(1 << 4); /* enable SMSC911x */ - iowrite16(val, base + IRQ0MR); - iounmap(base); + iowrite16(val, fpga + IRQ0MR); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); -- cgit v1.2.3 From 688e6a6df880ee70e76f6ec1991dd0f186c25329 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 26 Aug 2013 01:52:35 -0700 Subject: ARM: shmobile: bockw: add R-Car sound support (PIO) This patch enables R-Car sound, AK4643 (CN19) and AK4554 (CN20/CN21) codec chip on Bock-W. But, it supports PIO transfer only at this point. User can check sound settings (Dip-switch/PFC etc) via this patch, but will get under/over flow error when playback/capture. Because PIO transfer via SSI will be interrupted "sampling rate" times per 1 second. DMA transfer will be supported when HPB-DMAC was enabled on r8a7778. You will notice strange ALSA sound card HW numbering on Bock-W board. This came from AK4554 strange format on playback/capture. The format on playback/capture is same on "normal" codec chip, but AK4554 was different. Because of that, AK4554 playback/capture are registered as a different sound card. Signed-off-by: Kuninori Morimoto [horms+renesas@verge.net.au: squashed cleanup of SND_SOC_xxx in Kconfig by Kuninori Morimoto] Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/Kconfig | 2 + arch/arm/mach-shmobile/board-bockw.c | 274 ++++++++++++++++++++++++++++++++++- 2 files changed, 275 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index b45240512ce0..d01e4276b889 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -168,6 +168,8 @@ config MACH_BOCKW select RENESAS_INTC_IRQPIN select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF + select SND_SOC_AK4554 if SND_SIMPLE_CARD + select SND_SOC_AK4642 if SND_SIMPLE_CARD config MACH_BOCKW_REFERENCE bool "BOCK-W - Reference Device Tree Implementation" diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index b998c6b2a270..7ad868d0a047 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -37,9 +37,12 @@ #include #include #include +#include +#include #define FPGA 0x18200000 #define IRQ0MR 0x30 +#define COMCTLR 0x101c static void __iomem *fpga; /* @@ -67,6 +70,35 @@ static void __iomem *fpga; * SW19 (MMC) 1 pin */ +/* + * SSI settings + * + * SW45: 1-4 side (SSI5 out, ROUT/LOUT CN19 Mid) + * SW46: 1101 (SSI6 Recorde) + * SW47: 1110 (SSI5 Playback) + * SW48: 11 (Recorde power) + * SW49: 1 (SSI slave mode) + * SW50: 1111 (SSI7, SSI8) + * SW51: 1111 (SSI3, SSI4) + * SW54: 1pin (ak4554 FPGA control) + * SW55: 1 (CLKB is 24.5760MHz) + * SW60: 1pin (ak4554 FPGA control) + * SW61: 3pin (use X11 clock) + * SW78: 3-6 (ak4642 connects I2C0) + * + * You can use sound as + * + * hw0: CN19: SSI56-AK4643 + * hw1: CN21: SSI3-AK4554(playback) + * hw2: CN21: SSI4-AK4554(capture) + * hw3: CN20: SSI7-AK4554(playback) + * hw4: CN20: SSI8-AK4554(capture) + * + * this command is required when playback on hw0. + * + * # amixer set "LINEOUT Mixer DACL" on + */ + /* Dummy supplies, where voltage doesn't matter */ static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vddvario", "smsc911x"), @@ -122,7 +154,9 @@ static struct sh_eth_plat_data ether_platform_data __initdata = { static struct i2c_board_info i2c0_devices[] = { { I2C_BOARD_INFO("rx8581", 0x51), - }, + }, { + I2C_BOARD_INFO("ak4643", 0x12), + } }; /* HSPI*/ @@ -185,7 +219,213 @@ static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = { \ BOCKW_CAMERA(0); BOCKW_CAMERA(1); +/* Sound */ +static struct resource rsnd_resources[] __initdata = { + [RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000), + [RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240), + [RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24), +}; + +static struct rsnd_ssi_platform_info rsnd_ssi[] = { + RSND_SSI_UNUSED, /* SSI 0 */ + RSND_SSI_UNUSED, /* SSI 1 */ + RSND_SSI_UNUSED, /* SSI 2 */ + RSND_SSI_SET(1, 0, gic_iid(0x85), RSND_SSI_PLAY), + RSND_SSI_SET(2, 0, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE | RSND_SSI_CLK_FROM_ADG), + RSND_SSI_SET(0, 0, gic_iid(0x86), RSND_SSI_PLAY), + RSND_SSI_SET(0, 0, gic_iid(0x86), 0), + RSND_SSI_SET(3, 0, gic_iid(0x86), RSND_SSI_PLAY), + RSND_SSI_SET(4, 0, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE | RSND_SSI_CLK_FROM_ADG), +}; + +static struct rsnd_scu_platform_info rsnd_scu[9] = { + /* no member at this point */ +}; + +enum { + AK4554_34 = 0, + AK4643_56, + AK4554_78, + SOUND_MAX, +}; + +static int rsnd_codec_power(int id, int enable) +{ + static int sound_user[SOUND_MAX] = {0, 0, 0}; + int *usr = NULL; + u32 bit; + + switch (id) { + case 3: + case 4: + usr = sound_user + AK4554_34; + bit = (1 << 10); + break; + case 5: + case 6: + usr = sound_user + AK4643_56; + bit = (1 << 6); + break; + case 7: + case 8: + usr = sound_user + AK4554_78; + bit = (1 << 7); + break; + } + + if (!usr) + return -EIO; + + if (enable) { + if (*usr == 0) { + u32 val = ioread16(fpga + COMCTLR); + val &= ~bit; + iowrite16(val, fpga + COMCTLR); + } + + (*usr)++; + } else { + if (*usr == 0) + return 0; + + (*usr)--; + + if (*usr == 0) { + u32 val = ioread16(fpga + COMCTLR); + val |= bit; + iowrite16(val, fpga + COMCTLR); + } + } + + return 0; +} + +static int rsnd_start(int id) +{ + return rsnd_codec_power(id, 1); +} + +static int rsnd_stop(int id) +{ + return rsnd_codec_power(id, 0); +} + +static struct rcar_snd_info rsnd_info = { + .flags = RSND_GEN1, + .ssi_info = rsnd_ssi, + .ssi_info_nr = ARRAY_SIZE(rsnd_ssi), + .scu_info = rsnd_scu, + .scu_info_nr = ARRAY_SIZE(rsnd_scu), + .start = rsnd_start, + .stop = rsnd_stop, +}; + +static struct asoc_simple_card_info rsnd_card_info[] = { + /* SSI5, SSI6 */ + { + .name = "AK4643", + .card = "SSI56-AK4643", + .codec = "ak4642-codec.0-0012", + .platform = "rcar_sound", + .daifmt = SND_SOC_DAIFMT_LEFT_J, + .cpu_dai = { + .name = "rsnd-dai.0", + .fmt = SND_SOC_DAIFMT_CBS_CFS, + }, + .codec_dai = { + .name = "ak4642-hifi", + .fmt = SND_SOC_DAIFMT_CBM_CFM, + .sysclk = 11289600, + }, + }, + /* SSI3 */ + { + .name = "AK4554", + .card = "SSI3-AK4554(playback)", + .codec = "ak4554-adc-dac.0", + .platform = "rcar_sound", + .cpu_dai = { + .name = "rsnd-dai.1", + .fmt = SND_SOC_DAIFMT_CBM_CFM | + SND_SOC_DAIFMT_RIGHT_J, + }, + .codec_dai = { + .name = "ak4554-hifi", + }, + }, + /* SSI4 */ + { + .name = "AK4554", + .card = "SSI4-AK4554(capture)", + .codec = "ak4554-adc-dac.0", + .platform = "rcar_sound", + .cpu_dai = { + .name = "rsnd-dai.2", + .fmt = SND_SOC_DAIFMT_CBM_CFM | + SND_SOC_DAIFMT_LEFT_J, + }, + .codec_dai = { + .name = "ak4554-hifi", + }, + }, + /* SSI7 */ + { + .name = "AK4554", + .card = "SSI7-AK4554(playback)", + .codec = "ak4554-adc-dac.1", + .platform = "rcar_sound", + .cpu_dai = { + .name = "rsnd-dai.3", + .fmt = SND_SOC_DAIFMT_CBM_CFM | + SND_SOC_DAIFMT_RIGHT_J, + }, + .codec_dai = { + .name = "ak4554-hifi", + }, + }, + /* SSI8 */ + { + .name = "AK4554", + .card = "SSI8-AK4554(capture)", + .codec = "ak4554-adc-dac.1", + .platform = "rcar_sound", + .cpu_dai = { + .name = "rsnd-dai.4", + .fmt = SND_SOC_DAIFMT_CBM_CFM | + SND_SOC_DAIFMT_LEFT_J, + }, + .codec_dai = { + .name = "ak4554-hifi", + }, + } +}; + static const struct pinctrl_map bockw_pinctrl_map[] = { + /* AUDIO */ + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "audio_clk_a", "audio_clk"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "audio_clk_b", "audio_clk"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi34_ctrl", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi3_data", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi4_data", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi5_ctrl", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi5_data", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi6_ctrl", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi6_data", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi78_ctrl", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi7_data", "ssi"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778", + "ssi8_data", "ssi"), /* Ether */ PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778", "ether_rmii", "ether"), @@ -233,6 +473,8 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { static void __init bockw_init(void) { void __iomem *base; + struct clk *clk; + int i; r8a7778_clock_init(); r8a7778_init_irq_extpin(1); @@ -309,6 +551,36 @@ static void __init bockw_init(void) sdhi0_resources, ARRAY_SIZE(sdhi0_resources), &sdhi0_info, sizeof(struct sh_mobile_sdhi_info)); } + + /* for Audio */ + clk = clk_get(NULL, "audio_clk_b"); + clk_set_rate(clk, 24576000); + clk_put(clk); + rsnd_codec_power(5, 1); /* enable ak4642 */ + + platform_device_register_simple( + "ak4554-adc-dac", 0, NULL, 0); + + platform_device_register_simple( + "ak4554-adc-dac", 1, NULL, 0); + + platform_device_register_resndata( + &platform_bus, "rcar_sound", -1, + rsnd_resources, ARRAY_SIZE(rsnd_resources), + &rsnd_info, sizeof(rsnd_info)); + + for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) { + struct platform_device_info cardinfo = { + .parent = &platform_bus, + .name = "asoc-simple-card", + .id = i, + .data = &rsnd_card_info[i], + .size_data = sizeof(struct asoc_simple_card_info), + .dma_mask = ~0, + }; + + platform_device_register_full(&cardinfo); + } } static const char *bockw_boards_compat_dt[] __initdata = { -- cgit v1.2.3 From 1f52c65975ba16cdba1830ba216776111197a3ee Mon Sep 17 00:00:00 2001 From: Hisashi Nakamura Date: Wed, 4 Sep 2013 12:46:49 +0900 Subject: ARM: shmobile: Koelsch support Koelsch base board support making use of 2 GiB of memory, the r8a7791 SoC with the SCIF0 serial port and CA15 with CMT timer. Signed-off-by: Hisashi Nakamura Signed-off-by: Ryo Kataoka [damm@opensource.se: Forward ported to upstream, dropped not-yet-ready SMP/PFC] Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/r8a7791-koelsch.dts | 32 +++++++++++++++++++++++++ arch/arm/mach-shmobile/Kconfig | 5 ++++ arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/Makefile.boot | 1 + arch/arm/mach-shmobile/board-koelsch.c | 44 ++++++++++++++++++++++++++++++++++ 6 files changed, 84 insertions(+) create mode 100644 arch/arm/boot/dts/r8a7791-koelsch.dts create mode 100644 arch/arm/mach-shmobile/board-koelsch.c (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cc0f1fb61753..3b1c462e8575 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -202,6 +202,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva-reference.dtb \ r8a7779-marzen.dtb \ r8a7779-marzen-reference.dtb \ + r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ r8a7790-lager-reference.dtb \ sh73a0-kzm9g.dtb \ diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts new file mode 100644 index 000000000000..1ce5250ec278 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -0,0 +1,32 @@ +/* + * Device Tree Source for the Koelsch board + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7791.dtsi" + +/ { + model = "Koelsch"; + compatible = "renesas,koelsch", "renesas,r8a7791"; + + chosen { + bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index d01e4276b889..eda285794961 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -221,6 +221,11 @@ config MACH_LAGER_REFERENCE This is intended to aid developers +config MACH_KOELSCH + bool "Koelsch board" + depends on ARCH_R8A7791 + select USE_OF + config MACH_KZM9D bool "KZM9D board" depends on ARCH_EMEV2 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 228193cc9a38..e552e84b1fae 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_MACH_LAGER) += board-lager.o obj-$(CONFIG_MACH_LAGER_REFERENCE) += board-lager-reference.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o +obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o obj-$(CONFIG_MACH_KZM9D_REFERENCE) += board-kzm9d-reference.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 6a504fe7d86c..60e29e6c1126 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -6,6 +6,7 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 +loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c new file mode 100644 index 000000000000..cc2d5e82b59a --- /dev/null +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -0,0 +1,44 @@ +/* + * Koelsch board support + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include + +static void __init koelsch_add_standard_devices(void) +{ + r8a7791_clock_init(); + r8a7791_add_dt_devices(); +} + +static const char * const koelsch_boards_compat_dt[] __initconst = { + "renesas,koelsch", + NULL, +}; + +DT_MACHINE_START(KOELSCH_DT, "koelsch") + .init_early = r8a7791_init_early, + .init_machine = koelsch_add_standard_devices, + .dt_compat = koelsch_boards_compat_dt, +MACHINE_END -- cgit v1.2.3 From 81a0d9062d5c93490b215d2440bbd7deb3918707 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 4 Aug 2013 17:43:37 -0700 Subject: ARM: shmobile: bockw: add USB Function support Bock-W USB1 (CN29) can be USB Host/Func by SW98/SW99 settings. USB Func will be enabled if CONFIG_USB_RENESAS_USBHS_UDC[_MODULE] was selected on this patch Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-bockw.c | 81 ++++++++++++++++++++++++++++++++++-- 1 file changed, 78 insertions(+), 3 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index 7ad868d0a047..330e84c14f8e 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -99,6 +100,16 @@ static void __iomem *fpga; * # amixer set "LINEOUT Mixer DACL" on */ +/* + * USB + * + * USB1 (CN29) can be Host/Function + * + * Host Func + * SW98 1 2 + * SW99 1 3 + */ + /* Dummy supplies, where voltage doesn't matter */ static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vddvario", "smsc911x"), @@ -117,13 +128,71 @@ static struct resource smsc911x_resources[] __initdata = { DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */ }; +#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC) +/* + * When USB1 is Func + */ +static int usbhsf_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +#define SUSPMODE 0x102 +static int usbhsf_power_ctrl(struct platform_device *pdev, + void __iomem *base, int enable) +{ + enable = !!enable; + + r8a7778_usb_phy_power(enable); + + iowrite16(enable << 14, base + SUSPMODE); + + return 0; +} + +static struct resource usbhsf_resources[] __initdata = { + DEFINE_RES_MEM(0xffe60000, 0x110), + DEFINE_RES_IRQ(gic_iid(0x4f)), +}; + +static struct renesas_usbhs_platform_info usbhs_info __initdata = { + .platform_callback = { + .get_id = usbhsf_get_id, + .power_ctrl = usbhsf_power_ctrl, + }, + .driver_param = { + .buswait_bwait = 4, + }, +}; + +#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,} +#define USB1_DEVICE "renesas_usbhs" +#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() \ + platform_device_register_resndata( \ + &platform_bus, "renesas_usbhs", -1, \ + usbhsf_resources, \ + ARRAY_SIZE(usbhsf_resources), \ + &usbhs_info, sizeof(struct renesas_usbhs_platform_info)) + +#else +/* + * When USB1 is Host + */ +#define USB_PHY_SETTING { } +#define USB1_DEVICE "ehci-platform" +#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() + +#endif + /* USB */ static struct resource usb_phy_resources[] __initdata = { DEFINE_RES_MEM(0xffe70800, 0x100), DEFINE_RES_MEM(0xffe76000, 0x100), }; -static struct rcar_phy_platform_data usb_phy_platform_data __initdata; +static struct rcar_phy_platform_data usb_phy_platform_data __initdata = + USB_PHY_SETTING; + /* SDHI */ static struct sh_mobile_sdhi_info sdhi0_info __initdata = { @@ -445,7 +514,7 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { /* USB */ PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", "usb0", "usb0"), - PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778", + PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778", "usb1", "usb1"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", @@ -583,6 +652,12 @@ static void __init bockw_init(void) } } +static void __init bockw_init_late(void) +{ + r8a7778_init_late(); + ADD_USB_FUNC_DEVICE_IF_POSSIBLE(); +} + static const char *bockw_boards_compat_dt[] __initdata = { "renesas,bockw", NULL, @@ -593,5 +668,5 @@ DT_MACHINE_START(BOCKW_DT, "bockw") .init_irq = r8a7778_init_irq_dt, .init_machine = bockw_init, .dt_compat = bockw_boards_compat_dt, - .init_late = r8a7778_init_late, + .init_late = bockw_init_late, MACHINE_END -- cgit v1.2.3 From a2eeabcceb3eb2646b0064b55b8ff0eb6f1ae13d Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 10 Jul 2013 21:21:16 +0200 Subject: ARM: shmobile: ape6evm: disable MMCIF Command Completion Signal MMCIF on r8a73a4 doesn't support Command Completion Signal, a platform parameter has to be added to disable it on ape6evm. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-ape6evm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index 02be420ebd1e..0365d2e2e730 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -162,6 +162,7 @@ static struct regulator_consumer_supply vcc_sdhi1_consumers[] = /* MMCIF */ static const struct sh_mmcif_plat_data mmcif0_pdata __initconst = { .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .ccs_unsupported = true, }; static const struct resource mmcif0_resources[] __initconst = { -- cgit v1.2.3 From fbf3264c046a6cce4cefec6e069fc86c0175f7d3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 10 Jul 2013 21:21:14 +0200 Subject: ARM: shmobile: armadillo800eva: disable MMCIF Command Completion Signal MMCIF on r8a7740 doesn't support Command Completion Signal, a platform parameter has to be added to disable it on armadillo800eva. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 5bd1479d3deb..fc8f9f85d86d 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -823,6 +823,7 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .ccs_unsupported = true, .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; -- cgit v1.2.3 From 58d0bbd1a734831262157f006306f084dda9605d Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 10 Jul 2013 21:21:15 +0200 Subject: ARM: shmobile: kzm9g: disable MMCIF Command Completion Signal MMCIF on sh73a0 doesn't support Command Completion Signal, a platform parameter has to be added to disable it on kzm9g. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-kzm9g.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index f1994968d303..fe689b7fdc9e 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -366,6 +366,7 @@ static struct resource sh_mmcif_resources[] = { static struct sh_mmcif_plat_data sh_mmcif_platdata = { .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .ccs_unsupported = true, .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; -- cgit v1.2.3 From b77c6bcef2082a7cd96124daf15df8da5b670ebe Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 10 Jul 2013 21:21:17 +0200 Subject: ARM: shmobile: lager: disable MMCIF Command Completion Signal, add CLK_CTRL2 MMCIF on r8a7790 doesn't support Command Completion Signal, but it does implement a CE_CLK_CTRL2 register. Platform parameters have to be added to account for these features on lager. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-lager.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index 9fbbf23244a8..1e231423b2b0 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -142,6 +142,8 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] = /* MMCIF */ static struct sh_mmcif_plat_data mmcif1_pdata __initdata = { .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .clk_ctrl2_present = true, + .ccs_unsupported = true, }; static struct resource mmcif1_resources[] __initdata = { -- cgit v1.2.3 From 3794c1663491012b10b41699b5ee5175bd75a3f1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 2 Aug 2013 16:50:40 +0200 Subject: ARM: shmobile: r8a73a4: add a DMAC platform device and clock for it Add a DMAC platform device and clock definitions for it on r8a73a4. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/clock-r8a73a4.c | 4 +- arch/arm/mach-shmobile/include/mach/r8a73a4.h | 9 +++ arch/arm/mach-shmobile/setup-r8a73a4.c | 91 +++++++++++++++++++++++++++ 3 files changed, 103 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c index 8ea5ef6c79cc..357b9bca7940 100644 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -504,7 +504,7 @@ static struct clk div6_clks[DIV6_NR] = { /* MSTP */ enum { - MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, + MSTP218, MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP329, MSTP323, MSTP318, MSTP317, MSTP316, MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300, MSTP411, MSTP410, MSTP409, @@ -519,6 +519,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 7, 0), /* SCIFB1 */ [MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 16, 0), /* SCIFB2 */ [MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP], SMSTPCR2, 17, 0), /* SCIFB3 */ + [MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC */ [MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR3, 0, 0), /* IIC2 */ [MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */ [MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */ @@ -578,6 +579,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]), + CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h index 5214338a6a47..ce8bdd1d8a8a 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h +++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h @@ -1,6 +1,15 @@ #ifndef __ASM_R8A73A4_H__ #define __ASM_R8A73A4_H__ +/* DMA slave IDs */ +enum { + SHDMA_SLAVE_INVALID, + SHDMA_SLAVE_MMCIF0_TX, + SHDMA_SLAVE_MMCIF0_RX, + SHDMA_SLAVE_MMCIF1_TX, + SHDMA_SLAVE_MMCIF1_RX, +}; + void r8a73a4_add_standard_devices(void); void r8a73a4_add_dt_devices(void); void r8a73a4_clock_init(void); diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 53a896275cae..b0f2749071be 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -22,8 +22,10 @@ #include #include #include +#include #include #include +#include #include #include #include @@ -199,12 +201,101 @@ void __init r8a73a4_add_dt_devices(void) r8a7790_register_cmt(10); } +/* DMA */ +static const struct sh_dmae_slave_config dma_slaves[] = { + { + .slave_id = SHDMA_SLAVE_MMCIF0_TX, + .addr = 0xee200034, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xd1, + }, { + .slave_id = SHDMA_SLAVE_MMCIF0_RX, + .addr = 0xee200034, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xd2, + }, { + .slave_id = SHDMA_SLAVE_MMCIF1_TX, + .addr = 0xee220034, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xe1, + }, { + .slave_id = SHDMA_SLAVE_MMCIF1_RX, + .addr = 0xee220034, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xe2, + }, +}; + +#define DMAE_CHANNEL(a, b) \ + { \ + .offset = (a) - 0x20, \ + .dmars = (a) - 0x20 + 0x40, \ + .chclr_bit = (b), \ + .chclr_offset = 0x80 - 0x20, \ + } + +static const struct sh_dmae_channel dma_channels[] = { + DMAE_CHANNEL(0x8000, 0), + DMAE_CHANNEL(0x8080, 1), + DMAE_CHANNEL(0x8100, 2), + DMAE_CHANNEL(0x8180, 3), + DMAE_CHANNEL(0x8200, 4), + DMAE_CHANNEL(0x8280, 5), + DMAE_CHANNEL(0x8300, 6), + DMAE_CHANNEL(0x8380, 7), + DMAE_CHANNEL(0x8400, 8), + DMAE_CHANNEL(0x8480, 9), + DMAE_CHANNEL(0x8500, 10), + DMAE_CHANNEL(0x8580, 11), + DMAE_CHANNEL(0x8600, 12), + DMAE_CHANNEL(0x8680, 13), + DMAE_CHANNEL(0x8700, 14), + DMAE_CHANNEL(0x8780, 15), + DMAE_CHANNEL(0x8800, 16), + DMAE_CHANNEL(0x8880, 17), + DMAE_CHANNEL(0x8900, 18), + DMAE_CHANNEL(0x8980, 19), +}; + +static const struct sh_dmae_pdata dma_pdata = { + .slave = dma_slaves, + .slave_num = ARRAY_SIZE(dma_slaves), + .channel = dma_channels, + .channel_num = ARRAY_SIZE(dma_channels), + .ts_low_shift = TS_LOW_SHIFT, + .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT, + .ts_high_shift = TS_HI_SHIFT, + .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT, + .ts_shift = dma_ts_shift, + .ts_shift_num = ARRAY_SIZE(dma_ts_shift), + .dmaor_init = DMAOR_DME, + .chclr_present = 1, + .chclr_bitwise = 1, +}; + +static struct resource dma_resources[] = { + DEFINE_RES_MEM(0xe6700020, 0x89e0), + DEFINE_RES_IRQ_NAMED(gic_spi(220), "error_irq"), + { + /* IRQ for channels 0-19 */ + .start = gic_spi(200), + .end = gic_spi(219), + .flags = IORESOURCE_IRQ, + }, +}; + +#define r8a73a4_register_dmac() \ + platform_device_register_resndata(&platform_bus, "sh-dma-engine", 0, \ + dma_resources, ARRAY_SIZE(dma_resources), \ + &dma_pdata, sizeof(dma_pdata)) + void __init r8a73a4_add_standard_devices(void) { r8a73a4_add_dt_devices(); r8a73a4_register_irqc(0); r8a73a4_register_irqc(1); r8a73a4_register_thermal(); + r8a73a4_register_dmac(); } void __init r8a73a4_init_early(void) -- cgit v1.2.3 From 1eb6b5a0e55bfcfb0852b7d0f9442841ff807345 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Sun, 25 Aug 2013 01:35:13 +0400 Subject: ARM: shmobile: r8a7778: add HPB-DMAC support Add HPB-DMAC platform device on R8A7778 SoC along with its slave and channel configurations (only for SDHI0 so far). Signed-off-by: Max Filippov [Sergei: moved *enum* declaring HPB-DMAC slave IDs from now removed to , removed #include from setup-r8a7778.c, removed SSI-related *enum* values and SSI-related data from hpb_dmae_slaves[] and hpb_dmae_channels[], moved the comments after the element initializers of hpb_dmae_channels[].] Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/include/mach/r8a7778.h | 8 +++ arch/arm/mach-shmobile/setup-r8a7778.c | 85 +++++++++++++++++++++++++++ 2 files changed, 93 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index ea1dca6880f4..1d6fe973e8b4 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -1,6 +1,7 @@ /* * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto + * Copyright (C) 2013 Cogent Embedded, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,6 +22,13 @@ #include #include +/* HPB-DMA slave IDs */ +enum { + HPBDMA_SLAVE_DUMMY, + HPBDMA_SLAVE_SDHI0_TX, + HPBDMA_SLAVE_SDHI0_RX, +}; + extern void r8a7778_add_standard_devices(void); extern void r8a7778_add_standard_devices_dt(void); extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata); diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index e484d1420a01..fa1b7e44a973 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -356,6 +357,88 @@ void __init r8a7778_add_dt_devices(void) r8a7778_register_tmu(1); } +/* HPB-DMA */ + +/* Asynchronous mode register (ASYNCMDR) bits */ +#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(2) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(2) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(1) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */ + +static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = { + { + .id = HPBDMA_SLAVE_SDHI0_TX, + .addr = 0xffe4c000 + 0x30, + .dcr = HPB_DMAE_DCR_SPDS_16BIT | + HPB_DMAE_DCR_DMDL | + HPB_DMAE_DCR_DPDS_16BIT, + .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | + HPB_DMAE_ASYNCRSTR_ASRST22 | + HPB_DMAE_ASYNCRSTR_ASRST23, + .mdr = HPB_DMAE_ASYNCMDR_ASMD21_MULTI, + .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK, + .port = 0x0D0C, + .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, + .dma_ch = 21, + }, { + .id = HPBDMA_SLAVE_SDHI0_RX, + .addr = 0xffe4c000 + 0x30, + .dcr = HPB_DMAE_DCR_SMDL | + HPB_DMAE_DCR_SPDS_16BIT | + HPB_DMAE_DCR_DPDS_16BIT, + .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | + HPB_DMAE_ASYNCRSTR_ASRST22 | + HPB_DMAE_ASYNCRSTR_ASRST23, + .mdr = HPB_DMAE_ASYNCMDR_ASMD22_MULTI, + .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK, + .port = 0x0D0C, + .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, + .dma_ch = 22, + }, +}; + +static const struct hpb_dmae_channel hpb_dmae_channels[] = { + HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */ + HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */ +}; + +static struct hpb_dmae_pdata dma_platform_data __initdata = { + .slaves = hpb_dmae_slaves, + .num_slaves = ARRAY_SIZE(hpb_dmae_slaves), + .channels = hpb_dmae_channels, + .num_channels = ARRAY_SIZE(hpb_dmae_channels), + .ts_shift = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + }, + .num_hw_channels = 39, +}; + +static struct resource hpb_dmae_resources[] __initdata = { + /* Channel registers */ + DEFINE_RES_MEM(0xffc08000, 0x1000), + /* Common registers */ + DEFINE_RES_MEM(0xffc09000, 0x170), + /* Asynchronous reset registers */ + DEFINE_RES_MEM(0xffc00300, 4), + /* Asynchronous mode registers */ + DEFINE_RES_MEM(0xffc00400, 4), + /* IRQ for DMA channels */ + DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ), +}; + +static void __init r8a7778_register_hpb_dmae(void) +{ + platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1, + hpb_dmae_resources, + ARRAY_SIZE(hpb_dmae_resources), + &dma_platform_data, + sizeof(dma_platform_data)); +} + void __init r8a7778_add_standard_devices(void) { r8a7778_add_dt_devices(); @@ -366,6 +449,8 @@ void __init r8a7778_add_standard_devices(void) r8a7778_register_hspi(0); r8a7778_register_hspi(1); r8a7778_register_hspi(2); + + r8a7778_register_hpb_dmae(); } void __init r8a7778_init_late(void) -- cgit v1.2.3 From a43e5bd76a4a3df58167d85e8020a1c9e566ad75 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Sun, 25 Aug 2013 21:46:23 +0400 Subject: ARM: shmobile: r8a7779: add HPB-DMAC support Add HPB-DMAC platform device on R8A7779 SoC along with its slave and channel configurations (only for SDHI0 so far). Signed-off-by: Max Filippov [Sergei: moved *enum* declaring HPB-DMAC slave IDs from now removed to , removed #include from setup-r8a7779.c, removed SSI-related *enum* values and SSI-related data from hpb_dmae_slaves[] and hpb_dmae_channels[], added ASYNCMDR.ASBTMD{20|24|43} and ASYNCMDR.ASMD{20|24|43} fields/values, fixed comments to ASYNCMDR.ASBTMD2[123] and ASYNCMDR.ASMD2[123] fields/values, renamed all the bit/field/value #define's to include 'HBP_DMAE_' prefix to match the driver, moved comments after the element initializers of hpb_dmae_channels[].] Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/include/mach/r8a7779.h | 7 ++ arch/arm/mach-shmobile/setup-r8a7779.c | 154 ++++++++++++++++++++++++++ 2 files changed, 161 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h index 11c740047e14..31e87b92a9c3 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7779.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h @@ -6,6 +6,13 @@ #include #include +/* HPB-DMA slave IDs */ +enum { + HPBDMA_SLAVE_DUMMY, + HPBDMA_SLAVE_SDHI0_TX, + HPBDMA_SLAVE_SDHI0_RX, +}; + struct platform_device; struct r8a7779_pm_ch { diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index ecd0148ee1e1..eacb2f783693 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -632,6 +633,158 @@ static struct platform_device_info *vin_info_table[] __initdata = { &vin3_info, }; +/* HPB-DMA */ + +/* Asynchronous mode register bits */ +#define HPB_DMAE_ASYNCMDR_ASMD43_MASK BIT(23) /* MMC1 */ +#define HPB_DMAE_ASYNCMDR_ASMD43_SINGLE BIT(23) /* MMC1 */ +#define HPB_DMAE_ASYNCMDR_ASMD43_MULTI 0 /* MMC1 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD43_MASK BIT(22) /* MMC1 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD43_BURST BIT(22) /* MMC1 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD43_NBURST 0 /* MMC1 */ +#define HPB_DMAE_ASYNCMDR_ASMD24_MASK BIT(21) /* MMC0 */ +#define HPB_DMAE_ASYNCMDR_ASMD24_SINGLE BIT(21) /* MMC0 */ +#define HPB_DMAE_ASYNCMDR_ASMD24_MULTI 0 /* MMC0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD24_MASK BIT(20) /* MMC0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD24_BURST BIT(20) /* MMC0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD24_NBURST 0 /* MMC0 */ +#define HPB_DMAE_ASYNCMDR_ASMD41_MASK BIT(19) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD41_SINGLE BIT(19) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD41_MULTI 0 /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD41_MASK BIT(18) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD41_BURST BIT(18) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD41_NBURST 0 /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD40_MASK BIT(17) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD40_SINGLE BIT(17) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD40_MULTI 0 /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD40_MASK BIT(16) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD40_BURST BIT(16) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD40_NBURST 0 /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD39_MASK BIT(15) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD39_SINGLE BIT(15) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD39_MULTI 0 /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD39_MASK BIT(14) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD39_BURST BIT(14) /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD39_NBURST 0 /* SDHI3 */ +#define HPB_DMAE_ASYNCMDR_ASMD27_MASK BIT(13) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD27_SINGLE BIT(13) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD27_MULTI 0 /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD27_MASK BIT(12) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD27_BURST BIT(12) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD27_NBURST 0 /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD26_MASK BIT(11) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD26_SINGLE BIT(11) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD26_MULTI 0 /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD26_MASK BIT(10) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD26_BURST BIT(10) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD26_NBURST 0 /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD25_MASK BIT(9) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD25_SINGLE BIT(9) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD25_MULTI 0 /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD25_MASK BIT(8) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD25_BURST BIT(8) /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD25_NBURST 0 /* SDHI2 */ +#define HPB_DMAE_ASYNCMDR_ASMD23_MASK BIT(7) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD23_SINGLE BIT(7) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD23_MULTI 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD23_MASK BIT(6) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD23_BURST BIT(6) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD23_NBURST 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(5) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(5) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD22_MASK BIT(4) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD22_BURST BIT(4) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(3) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(3) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD21_MASK BIT(2) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD21_BURST BIT(2) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD20_MASK BIT(1) /* SDHI1 */ +#define HPB_DMAE_ASYNCMDR_ASMD20_SINGLE BIT(1) /* SDHI1 */ +#define HPB_DMAE_ASYNCMDR_ASMD20_MULTI 0 /* SDHI1 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD20_MASK BIT(0) /* SDHI1 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD20_BURST BIT(0) /* SDHI1 */ +#define HPB_DMAE_ASYNCMDR_ASBTMD20_NBURST 0 /* SDHI1 */ + +static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = { + { + .id = HPBDMA_SLAVE_SDHI0_TX, + .addr = 0xffe4c000 + 0x30, + .dcr = HPB_DMAE_DCR_SPDS_16BIT | + HPB_DMAE_DCR_DMDL | + HPB_DMAE_DCR_DPDS_16BIT, + .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | + HPB_DMAE_ASYNCRSTR_ASRST22 | + HPB_DMAE_ASYNCRSTR_ASRST23, + .mdr = HPB_DMAE_ASYNCMDR_ASMD21_SINGLE | + HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST, + .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK | + HPB_DMAE_ASYNCMDR_ASBTMD21_MASK, + .port = 0x0D0C, + .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, + .dma_ch = 21, + }, { + .id = HPBDMA_SLAVE_SDHI0_RX, + .addr = 0xffe4c000 + 0x30, + .dcr = HPB_DMAE_DCR_SMDL | + HPB_DMAE_DCR_SPDS_16BIT | + HPB_DMAE_DCR_DPDS_16BIT, + .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | + HPB_DMAE_ASYNCRSTR_ASRST22 | + HPB_DMAE_ASYNCRSTR_ASRST23, + .mdr = HPB_DMAE_ASYNCMDR_ASMD22_SINGLE | + HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST, + .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK | + HPB_DMAE_ASYNCMDR_ASBTMD22_MASK, + .port = 0x0D0C, + .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, + .dma_ch = 22, + }, +}; + +static const struct hpb_dmae_channel hpb_dmae_channels[] = { + HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */ + HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */ +}; + +static struct hpb_dmae_pdata dma_platform_data __initdata = { + .slaves = hpb_dmae_slaves, + .num_slaves = ARRAY_SIZE(hpb_dmae_slaves), + .channels = hpb_dmae_channels, + .num_channels = ARRAY_SIZE(hpb_dmae_channels), + .ts_shift = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + }, + .num_hw_channels = 44, +}; + +static struct resource hpb_dmae_resources[] __initdata = { + /* Channel registers */ + DEFINE_RES_MEM(0xffc08000, 0x1000), + /* Common registers */ + DEFINE_RES_MEM(0xffc09000, 0x170), + /* Asynchronous reset registers */ + DEFINE_RES_MEM(0xffc00300, 4), + /* Asynchronous mode registers */ + DEFINE_RES_MEM(0xffc00400, 4), + /* IRQ for DMA channels */ + DEFINE_RES_NAMED(gic_iid(0x8e), 12, NULL, IORESOURCE_IRQ), +}; + +static void __init r8a7779_register_hpb_dmae(void) +{ + platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1, + hpb_dmae_resources, + ARRAY_SIZE(hpb_dmae_resources), + &dma_platform_data, + sizeof(dma_platform_data)); +} + static struct platform_device *r8a7779_devices_dt[] __initdata = { &scif0_device, &scif1_device, @@ -665,6 +818,7 @@ void __init r8a7779_add_standard_devices(void) ARRAY_SIZE(r8a7779_devices_dt)); platform_add_devices(r8a7779_standard_devices, ARRAY_SIZE(r8a7779_standard_devices)); + r8a7779_register_hpb_dmae(); } void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata) -- cgit v1.2.3 From 159600807c809bc3773867d3d2b7826063b20c42 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 26 Sep 2013 19:20:57 +0200 Subject: ARM: shmobile: r8a7790: add I2C clocks and aliases for the DT mode This patch adds clock definitions for the 4 I2C interfaces on r8a7790 and clock aliases, suitable for the DT mode. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/clock-r8a7790.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index d99b87bc76ea..7661e898f376 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -52,6 +52,7 @@ #define SMSTPCR5 0xe6150144 #define SMSTPCR7 0xe615014c #define SMSTPCR8 0xe6150990 +#define SMSTPCR9 0xe6150994 #define SDCKCR 0xE6150074 #define SD2CKCR 0xE6150078 @@ -181,6 +182,7 @@ static struct clk div6_clks[DIV6_NR] = { /* MSTP */ enum { + MSTP931, MSTP930, MSTP929, MSTP928, MSTP813, MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720, MSTP717, MSTP716, @@ -192,6 +194,10 @@ enum { }; static struct clk mstp_clks[MSTP_NR] = { + [MSTP931] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 31, 0), /* I2C0 */ + [MSTP930] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 30, 0), /* I2C1 */ + [MSTP929] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 29, 0), /* I2C2 */ + [MSTP928] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 28, 0), /* I2C3 */ [MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */ [MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */ [MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */ @@ -271,6 +277,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]), CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]), + CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]), + CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]), + CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]), + CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]), CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]), -- cgit v1.2.3 From 8ceea7bd9757cb90f63f16b07a6d2a022e9c45d8 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 26 Sep 2013 19:30:02 +0200 Subject: ARM: shmobile: r8a73a4: add a clock alias for the DMAC in DT mode Devices, initialised from the Device Tree and from platform code usually have different names. This patch adds a clock alias for DMAC on r8a73a4 in DT mode. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/clock-r8a73a4.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c index 357b9bca7940..74841edf04eb 100644 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -580,6 +580,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]), CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), + CLKDEV_DEV_ID("e6700020.dma-controller", &mstp_clks[MSTP218]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), -- cgit v1.2.3 From 629cc70ddac35520688b3a8bd165435c886e78eb Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 12 Sep 2013 09:32:49 +0900 Subject: ARM: shmobile: Break out R-Car Gen2 setup code Move arch timer workaround code and boot mode pin handling from setup-r8a7790.c to setup-rcar-gen2.c. With this in place the same code can be used on other R-Car Generation 2 devices such as r8a7791. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/board-lager-reference.c | 2 +- arch/arm/mach-shmobile/board-lager.c | 2 +- arch/arm/mach-shmobile/clock-r8a7790.c | 2 +- arch/arm/mach-shmobile/include/mach/r8a7790.h | 6 +- arch/arm/mach-shmobile/include/mach/rcar-gen2.h | 8 +++ arch/arm/mach-shmobile/setup-r8a7790.c | 68 +----------------- arch/arm/mach-shmobile/setup-rcar-gen2.c | 91 +++++++++++++++++++++++++ 8 files changed, 106 insertions(+), 74 deletions(-) create mode 100644 arch/arm/mach-shmobile/include/mach/rcar-gen2.h create mode 100644 arch/arm/mach-shmobile/setup-rcar-gen2.c (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index d30ec1a427ec..6b7a02ee8b93 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o +obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c index d39a91b3ba48..1a1a4a888632 100644 --- a/arch/arm/mach-shmobile/board-lager-reference.c +++ b/arch/arm/mach-shmobile/board-lager-reference.c @@ -40,7 +40,7 @@ static const char *lager_boards_compat_dt[] __initdata = { DT_MACHINE_START(LAGER_DT, "lager") .smp = smp_ops(r8a7790_smp_ops), .init_early = r8a7790_init_early, + .init_time = rcar_gen2_timer_init, .init_machine = lager_add_standard_devices, - .init_time = r8a7790_timer_init, .dt_compat = lager_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index ef3baaa79e6d..230bc9d67852 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -163,7 +163,7 @@ static const char *lager_boards_compat_dt[] __initdata = { DT_MACHINE_START(LAGER_DT, "lager") .smp = smp_ops(r8a7790_smp_ops), .init_early = r8a7790_init_early, - .init_time = r8a7790_timer_init, + .init_time = rcar_gen2_timer_init, .init_machine = lager_add_standard_devices, .dt_compat = lager_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 7661e898f376..a64f965c7da1 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -310,7 +310,7 @@ static struct clk_lookup lookups[] = { void __init r8a7790_clock_init(void) { - u32 mode = r8a7790_read_mode_pins(); + u32 mode = rcar_gen2_read_mode_pins(); int k, ret = 0; switch (mode & (MD(14) | MD(13))) { diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h index 79e731c83e50..5fbfa28b40b6 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7790.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h @@ -1,15 +1,13 @@ #ifndef __ASM_R8A7790_H__ #define __ASM_R8A7790_H__ +#include + void r8a7790_add_standard_devices(void); void r8a7790_add_dt_devices(void); void r8a7790_clock_init(void); void r8a7790_pinmux_init(void); void r8a7790_init_early(void); -void r8a7790_timer_init(void); extern struct smp_operations r8a7790_smp_ops; -#define MD(nr) BIT(nr) -u32 r8a7790_read_mode_pins(void); - #endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h new file mode 100644 index 000000000000..43f606eb2d82 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h @@ -0,0 +1,8 @@ +#ifndef __ASM_RCAR_GEN2_H__ +#define __ASM_RCAR_GEN2_H__ + +void rcar_gen2_timer_init(void); +#define MD(nr) BIT(nr) +u32 rcar_gen2_read_mode_pins(void); + +#endif /* __ASM_RCAR_GEN2_H__ */ diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index c7e24eff9ba2..c47bcebbcb00 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -18,7 +18,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include #include #include #include @@ -203,71 +202,6 @@ void __init r8a7790_add_standard_devices(void) r8a7790_register_thermal(); } -#define MODEMR 0xe6160060 - -u32 __init r8a7790_read_mode_pins(void) -{ - void __iomem *modemr = ioremap_nocache(MODEMR, 4); - u32 mode; - - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - - return mode; -} - -#define CNTCR 0 -#define CNTFID0 0x20 - -void __init r8a7790_timer_init(void) -{ -#ifdef CONFIG_ARM_ARCH_TIMER - u32 mode = r8a7790_read_mode_pins(); - void __iomem *base; - int extal_mhz = 0; - u32 freq; - - /* At Linux boot time the r8a7790 arch timer comes up - * with the counter disabled. Moreover, it may also report - * a potentially incorrect fixed 13 MHz frequency. To be - * correct these registers need to be updated to use the - * frequency EXTAL / 2 which can be determined by the MD pins. - */ - - switch (mode & (MD(14) | MD(13))) { - case 0: - extal_mhz = 15; - break; - case MD(13): - extal_mhz = 20; - break; - case MD(14): - extal_mhz = 26; - break; - case MD(13) | MD(14): - extal_mhz = 30; - break; - } - - /* The arch timer frequency equals EXTAL / 2 */ - freq = extal_mhz * (1000000 / 2); - - /* Remap "armgcnt address map" space */ - base = ioremap(0xe6080000, PAGE_SIZE); - - /* Update registers with correct frequency */ - iowrite32(freq, base + CNTFID0); - asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); - - /* make sure arch timer is started by setting bit 0 of CNTCR */ - iowrite32(1, base + CNTCR); - iounmap(base); -#endif /* CONFIG_ARM_ARCH_TIMER */ - - clocksource_of_init(); -} - void __init r8a7790_init_early(void) { #ifndef CONFIG_ARM_ARCH_TIMER @@ -285,7 +219,7 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = { DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") .smp = smp_ops(r8a7790_smp_ops), .init_early = r8a7790_init_early, - .init_time = r8a7790_timer_init, + .init_time = rcar_gen2_timer_init, .dt_compat = r8a7790_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c new file mode 100644 index 000000000000..5734c24bf6c7 --- /dev/null +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -0,0 +1,91 @@ +/* + * R-Car Generation 2 support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include + +#define MODEMR 0xe6160060 + +u32 __init rcar_gen2_read_mode_pins(void) +{ + void __iomem *modemr = ioremap_nocache(MODEMR, 4); + u32 mode; + + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + + return mode; +} + +#define CNTCR 0 +#define CNTFID0 0x20 + +void __init rcar_gen2_timer_init(void) +{ +#ifdef CONFIG_ARM_ARCH_TIMER + u32 mode = rcar_gen2_read_mode_pins(); + void __iomem *base; + int extal_mhz = 0; + u32 freq; + + /* At Linux boot time the r8a7790 arch timer comes up + * with the counter disabled. Moreover, it may also report + * a potentially incorrect fixed 13 MHz frequency. To be + * correct these registers need to be updated to use the + * frequency EXTAL / 2 which can be determined by the MD pins. + */ + + switch (mode & (MD(14) | MD(13))) { + case 0: + extal_mhz = 15; + break; + case MD(13): + extal_mhz = 20; + break; + case MD(14): + extal_mhz = 26; + break; + case MD(13) | MD(14): + extal_mhz = 30; + break; + } + + /* The arch timer frequency equals EXTAL / 2 */ + freq = extal_mhz * (1000000 / 2); + + /* Remap "armgcnt address map" space */ + base = ioremap(0xe6080000, PAGE_SIZE); + + /* Update registers with correct frequency */ + iowrite32(freq, base + CNTFID0); + asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); + + /* make sure arch timer is started by setting bit 0 of CNTCR */ + iowrite32(1, base + CNTCR); + iounmap(base); +#endif /* CONFIG_ARM_ARCH_TIMER */ + + clocksource_of_init(); +} -- cgit v1.2.3 From 44a268e2a652eab3c21e282b6418a8c9ea279626 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 1 Oct 2013 17:11:53 +0900 Subject: ARM: shmobile: Introduce r8a7791_add_standard_devices() Introduce the function r8a7791_add_standard_devices() that follows the same style as other mach-shmobile SoC code and allows C version of board code to add on-chip devices. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/include/mach/r8a7791.h | 1 + arch/arm/mach-shmobile/setup-r8a7791.c | 5 +++++ 2 files changed, 6 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h index 2e6d66131083..2a86a5394672 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7791.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h @@ -1,6 +1,7 @@ #ifndef __ASM_R8A7791_H__ #define __ASM_R8A7791_H__ +void r8a7791_add_standard_devices(void); void r8a7791_add_dt_devices(void); void r8a7791_clock_init(void); void r8a7791_init_early(void); diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index b56399d2e1de..350dfc4918e3 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -129,6 +129,11 @@ void __init r8a7791_add_dt_devices(void) r8a7791_register_cmt(00); } +void __init r8a7791_add_standard_devices(void) +{ + r8a7791_add_dt_devices(); +} + void __init r8a7791_init_early(void) { #ifndef CONFIG_ARM_ARCH_TIMER -- cgit v1.2.3 From 1e4953d817712e52616d9a40460435eb8881d32d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 1 Oct 2013 17:12:19 +0900 Subject: ARM: shmobile: r8a7791 IRQC platform device support Add a platform device for the r8a7791 IRQC hardware driving IRQ pins IRQ0 to IRQ9. The Linux interrupt number is statically assigned to allow board code written in C to make use of static interrupt numbers. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-r8a7791.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index 350dfc4918e3..ba4fa3edf44f 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -109,6 +110,31 @@ static const struct resource cmt00_resources[] __initconst = { &cmt##idx##_platform_data, \ sizeof(struct sh_timer_config)) +static struct renesas_irqc_config irqc0_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ9 */ +}; + +static struct resource irqc0_resources[] = { + DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */ + DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */ + DEFINE_RES_IRQ(gic_spi(12)), /* IRQ4 */ + DEFINE_RES_IRQ(gic_spi(13)), /* IRQ5 */ + DEFINE_RES_IRQ(gic_spi(14)), /* IRQ6 */ + DEFINE_RES_IRQ(gic_spi(15)), /* IRQ7 */ + DEFINE_RES_IRQ(gic_spi(16)), /* IRQ8 */ + DEFINE_RES_IRQ(gic_spi(17)), /* IRQ9 */ +}; + +#define r8a7791_register_irqc(idx) \ + platform_device_register_resndata(&platform_bus, "renesas_irqc", \ + idx, irqc##idx##_resources, \ + ARRAY_SIZE(irqc##idx##_resources), \ + &irqc##idx##_data, \ + sizeof(struct renesas_irqc_config)) + void __init r8a7791_add_dt_devices(void) { r8a7791_register_scif(SCIFA0); @@ -132,6 +158,7 @@ void __init r8a7791_add_dt_devices(void) void __init r8a7791_add_standard_devices(void) { r8a7791_add_dt_devices(); + r8a7791_register_irqc(0); } void __init r8a7791_init_early(void) -- cgit v1.2.3 From ca1e6f22a0ab5ae6ec2114993a23d5814f0799c7 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 1 Oct 2013 17:12:48 +0900 Subject: ARM: shmobile: r8a7791 Arch timer workaround Make use of the R-Car Gen2 arch timer workaround on r8a7791. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/Makefile | 2 +- arch/arm/mach-shmobile/setup-r8a7791.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 6b7a02ee8b93..3c37e8271dfe 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o -obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o +obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o setup-rcar-gen2.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o # Clock objects diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index ba4fa3edf44f..cb3859b4cc95 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #define SCIF_COMMON(scif_type, baseaddr, irq) \ @@ -176,6 +177,7 @@ static const char *r8a7791_boards_compat_dt[] __initdata = { DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)") .init_early = r8a7791_init_early, + .init_time = rcar_gen2_timer_init, .dt_compat = r8a7791_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */ -- cgit v1.2.3 From 0086df273cf8c7e270f8930cc42d7dad15060516 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 19 Sep 2013 05:11:11 +0900 Subject: ARM: shmobile: Initial r7s72100 SoC support Add initial support for the r7272100 SoC including: - Single Cortex-A9 CPU Core - GIC No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/boot/dts/r7s72100.dtsi | 36 +++++ arch/arm/mach-shmobile/Kconfig | 6 + arch/arm/mach-shmobile/Makefile | 2 + arch/arm/mach-shmobile/clock-r7s72100.c | 194 +++++++++++++++++++++++++ arch/arm/mach-shmobile/include/mach/r7s72100.h | 7 + arch/arm/mach-shmobile/setup-r7s72100.c | 43 ++++++ 6 files changed, 288 insertions(+) create mode 100644 arch/arm/boot/dts/r7s72100.dtsi create mode 100644 arch/arm/mach-shmobile/clock-r7s72100.c create mode 100644 arch/arm/mach-shmobile/include/mach/r7s72100.h create mode 100644 arch/arm/mach-shmobile/setup-r7s72100.c (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi new file mode 100644 index 000000000000..46b82aa7dc4e --- /dev/null +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -0,0 +1,36 @@ +/* + * Device Tree Source for the r7s72100 SoC + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + compatible = "renesas,r7s72100"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + gic: interrupt-controller@e8201000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0xe8201000 0x1000>, + <0xe8202000 0x1000>; + }; +}; diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index b45240512ce0..5dd5f9f7897a 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -113,6 +113,12 @@ config ARCH_EMEV2 select ARM_GIC select CPU_V7 +config ARCH_R7S72100 + bool "RZ/A1H (R7S72100)" + select ARM_GIC + select CPU_V7 + select SH_CLK_CPG + comment "SH-Mobile Board Type" config MACH_APE6EVM diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 3c37e8271dfe..95e48d129ddc 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o setup-rcar-gen2.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o +obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o # Clock objects ifndef CONFIG_COMMON_CLK @@ -31,6 +32,7 @@ obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o +obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o endif # SMP objects diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c new file mode 100644 index 000000000000..1e71094f809d --- /dev/null +++ b/arch/arm/mach-shmobile/clock-r7s72100.c @@ -0,0 +1,194 @@ +/* + * r7a72100 clock framework support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2012 Phil Edworthy + * Copyright (C) 2011 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include + +/* registers */ +#define FRQCR 0xfcfe0010 +#define FRQCR2 0xfcfe0014 +#define STBCR3 0xfcfe0420 +#define STBCR4 0xfcfe0424 + +#define PLL_RATE 30 + +static struct clk_mapping cpg_mapping = { + .phys = 0xfcfe0000, + .len = 0x1000, +}; + +/* Fixed 32 KHz root clock for RTC */ +static struct clk r_clk = { + .rate = 32768, +}; + +/* + * Default rate for the root input clock, reset this with clk_set_rate() + * from the platform code. + */ +static struct clk extal_clk = { + .rate = 13330000, + .mapping = &cpg_mapping, +}; + +static unsigned long pll_recalc(struct clk *clk) +{ + return clk->parent->rate * PLL_RATE; +} + +static struct sh_clk_ops pll_clk_ops = { + .recalc = pll_recalc, +}; + +static struct clk pll_clk = { + .ops = &pll_clk_ops, + .parent = &extal_clk, + .flags = CLK_ENABLE_ON_INIT, +}; + +static unsigned long bus_recalc(struct clk *clk) +{ + return clk->parent->rate * 2 / 3; +} + +static struct sh_clk_ops bus_clk_ops = { + .recalc = bus_recalc, +}; + +static struct clk bus_clk = { + .ops = &bus_clk_ops, + .parent = &pll_clk, + .flags = CLK_ENABLE_ON_INIT, +}; + +static unsigned long peripheral0_recalc(struct clk *clk) +{ + return clk->parent->rate / 12; +} + +static struct sh_clk_ops peripheral0_clk_ops = { + .recalc = peripheral0_recalc, +}; + +static struct clk peripheral0_clk = { + .ops = &peripheral0_clk_ops, + .parent = &pll_clk, + .flags = CLK_ENABLE_ON_INIT, +}; + +static unsigned long peripheral1_recalc(struct clk *clk) +{ + return clk->parent->rate / 6; +} + +static struct sh_clk_ops peripheral1_clk_ops = { + .recalc = peripheral1_recalc, +}; + +static struct clk peripheral1_clk = { + .ops = &peripheral1_clk_ops, + .parent = &pll_clk, + .flags = CLK_ENABLE_ON_INIT, +}; + +struct clk *main_clks[] = { + &r_clk, + &extal_clk, + &pll_clk, + &bus_clk, + &peripheral0_clk, + &peripheral1_clk, +}; + +static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */ +static int multipliers[] = { 1, 2, 1, 1 }; + +static struct clk_div_mult_table div4_div_mult_table = { + .divisors = div2, + .nr_divisors = ARRAY_SIZE(div2), + .multipliers = multipliers, + .nr_multipliers = ARRAY_SIZE(multipliers), +}; + +static struct clk_div4_table div4_table = { + .div_mult_table = &div4_div_mult_table, +}; + +enum { DIV4_I, + DIV4_NR }; + +#define DIV4(_reg, _bit, _mask, _flags) \ + SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags) + +/* The mask field specifies the div2 entries that are valid */ +struct clk div4_clks[DIV4_NR] = { + [DIV4_I] = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT + | CLK_ENABLE_ON_INIT), +}; + +enum { MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40, + MSTP33, MSTP_NR }; + +static struct clk mstp_clks[MSTP_NR] = { + [MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */ + [MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */ + [MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */ + [MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */ + [MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */ + [MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */ + [MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */ + [MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */ + [MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */ +}; + +static struct clk_lookup lookups[] = { + /* main clocks */ + CLKDEV_CON_ID("rclk", &r_clk), + CLKDEV_CON_ID("extal", &extal_clk), + CLKDEV_CON_ID("pll_clk", &pll_clk), + CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk), + + /* DIV4 clocks */ + CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]), + + /* MSTP clocks */ +}; + +void __init r7s72100_clock_init(void) +{ + int k, ret = 0; + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + if (!ret) + ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); + + if (!ret) + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); + + if (!ret) + shmobile_clk_init(); + else + panic("failed to setup rza1 clocks\n"); +} diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/include/mach/r7s72100.h new file mode 100644 index 000000000000..f78062e98bd4 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/r7s72100.h @@ -0,0 +1,7 @@ +#ifndef __ASM_R7S72100_H__ +#define __ASM_R7S72100_H__ + +void r7s72100_clock_init(void); +void r7s72100_init_early(void); + +#endif /* __ASM_R7S72100_H__ */ diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c new file mode 100644 index 000000000000..c1aded0984a8 --- /dev/null +++ b/arch/arm/mach-shmobile/setup-r7s72100.c @@ -0,0 +1,43 @@ +/* + * r7s72100 processor support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include + +void __init r7s72100_init_early(void) +{ + shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */ +} + +#ifdef CONFIG_USE_OF +static const char *r7s72100_boards_compat_dt[] __initdata = { + "renesas,r7s72100", + NULL, +}; + +DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)") + .init_early = r7s72100_init_early, + .dt_compat = r7s72100_boards_compat_dt, +MACHINE_END +#endif /* CONFIG_USE_OF */ -- cgit v1.2.3 From 77df55c66da2ad45ad18111194d192011dbeffb9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 19 Sep 2013 05:11:20 +0900 Subject: ARM: shmobile: r7s72100 SCIF support Add SCIF serial port support to the r7s72100 SoC by adding platform devices for SCIF0 -> SCIF7 together with clock bindings. DT device description is excluded at this point since such bindings are still under development. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/clock-r7s72100.c | 8 +++++ arch/arm/mach-shmobile/include/mach/r7s72100.h | 1 + arch/arm/mach-shmobile/setup-r7s72100.c | 45 ++++++++++++++++++++++++++ 3 files changed, 54 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c index 1e71094f809d..4aba20ca127e 100644 --- a/arch/arm/mach-shmobile/clock-r7s72100.c +++ b/arch/arm/mach-shmobile/clock-r7s72100.c @@ -170,6 +170,14 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]), /* MSTP clocks */ + CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]), + CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]), }; void __init r7s72100_clock_init(void) diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/include/mach/r7s72100.h index f78062e98bd4..5f34b20ecd4a 100644 --- a/arch/arm/mach-shmobile/include/mach/r7s72100.h +++ b/arch/arm/mach-shmobile/include/mach/r7s72100.h @@ -1,6 +1,7 @@ #ifndef __ASM_R7S72100_H__ #define __ASM_R7S72100_H__ +void r7s72100_add_dt_devices(void); void r7s72100_clock_init(void); void r7s72100_init_early(void); diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c index c1aded0984a8..d4eb509a1c87 100644 --- a/arch/arm/mach-shmobile/setup-r7s72100.c +++ b/arch/arm/mach-shmobile/setup-r7s72100.c @@ -21,10 +21,55 @@ #include #include #include +#include #include +#include #include #include +#define SCIF_DATA(index, baseaddr, irq) \ +[index] = { \ + .type = PORT_SCIF, \ + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, \ + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ + .scbrr_algo_id = SCBRR_ALGO_2, \ + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | \ + SCSCR_REIE, \ + .mapbase = baseaddr, \ + .irqs = { irq + 1, irq + 2, irq + 3, irq }, \ +} + +enum { SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7 }; + +static const struct plat_sci_port scif[] __initconst = { + SCIF_DATA(SCIF0, 0xe8007000, gic_iid(221)), /* SCIF0 */ + SCIF_DATA(SCIF1, 0xe8007800, gic_iid(225)), /* SCIF1 */ + SCIF_DATA(SCIF2, 0xe8008000, gic_iid(229)), /* SCIF2 */ + SCIF_DATA(SCIF3, 0xe8008800, gic_iid(233)), /* SCIF3 */ + SCIF_DATA(SCIF4, 0xe8009000, gic_iid(237)), /* SCIF4 */ + SCIF_DATA(SCIF5, 0xe8009800, gic_iid(241)), /* SCIF5 */ + SCIF_DATA(SCIF6, 0xe800a000, gic_iid(245)), /* SCIF6 */ + SCIF_DATA(SCIF7, 0xe800a800, gic_iid(249)), /* SCIF7 */ +}; + +static inline void r7s72100_register_scif(int idx) +{ + platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx], + sizeof(struct plat_sci_port)); +} + +void __init r7s72100_add_dt_devices(void) +{ + r7s72100_register_scif(SCIF0); + r7s72100_register_scif(SCIF1); + r7s72100_register_scif(SCIF2); + r7s72100_register_scif(SCIF3); + r7s72100_register_scif(SCIF4); + r7s72100_register_scif(SCIF5); + r7s72100_register_scif(SCIF6); + r7s72100_register_scif(SCIF7); +} + void __init r7s72100_init_early(void) { shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */ -- cgit v1.2.3 From f564244fb14e0b8b3d8268efbac2e9506644c19f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 2 Oct 2013 01:31:40 -0700 Subject: ARM: shmobile: r8a7778: split r8a7778_init_irq_extpin() for DT r8a7778 INTC needs IRL pin mode settings to determine behavior of IRQ0 - IRQ3, and r8a7778_init_irq_extpin() is controlling it via irlm parameter. But this function registers renesas_intc_irqpin driver if irlm was set, and this value depends on platform. This is not good for DT. This patch splits r8a7778_init_irq_extpin() function into "mode settings" and "funtion register" parts. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/include/mach/r8a7778.h | 1 + arch/arm/mach-shmobile/setup-r8a7778.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h index 1d6fe973e8b4..dbe221a484d5 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -41,6 +41,7 @@ extern void r8a7778_init_delay(void); extern void r8a7778_init_irq_dt(void); extern void r8a7778_clock_init(void); extern void r8a7778_init_irq_extpin(int irlm); +extern void r8a7778_init_irq_extpin_dt(int irlm); extern void r8a7778_pinmux_init(void); extern int r8a7778_usb_phy_power(bool enable); diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index fa1b7e44a973..16d49aa8b5db 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -476,7 +476,7 @@ static struct resource irqpin_resources[] __initdata = { DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */ }; -void __init r8a7778_init_irq_extpin(int irlm) +void __init r8a7778_init_irq_extpin_dt(int irlm) { void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); unsigned long tmp; @@ -494,7 +494,11 @@ void __init r8a7778_init_irq_extpin(int irlm) tmp |= (1 << 21); /* LVLMODE = 1 */ iowrite32(tmp, icr0); iounmap(icr0); +} +void __init r8a7778_init_irq_extpin(int irlm) +{ + r8a7778_init_irq_extpin_dt(irlm); if (irlm) platform_device_register_resndata( &platform_bus, "renesas_intc_irqpin", -1, -- cgit v1.2.3 From 90e27a05f64b8b4b6021cd996bef957656a8c8ab Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 2 Oct 2013 01:38:23 -0700 Subject: ARM: shmobile: r8a7779: split r8a7779_init_irq_extpin() for DT r8a7779 INTC needs IRL pin mode settings to determine behavior of IRQ0 - IRQ3, and r8a7779_init_irq_extpin() is controlling it via irlm parameter. But this function registers renesas_intc_irqpin driver if irlm was set, and this value depends on platform. This is not good for DT. This patch splits r8a7779_init_irq_extpin() function into "mode settings" and "funtion register" parts Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/include/mach/r8a7779.h | 1 + arch/arm/mach-shmobile/setup-r8a7779.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h index 31e87b92a9c3..17af34ed89c8 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7779.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h @@ -33,6 +33,7 @@ static inline struct r8a7779_pm_ch *to_r8a7779_ch(struct generic_pm_domain *d) extern void r8a7779_init_delay(void); extern void r8a7779_init_irq_extpin(int irlm); +extern void r8a7779_init_irq_extpin_dt(int irlm); extern void r8a7779_init_irq_dt(void); extern void r8a7779_map_io(void); extern void r8a7779_earlytimer_init(void); diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index eacb2f783693..13049e9d691c 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -98,7 +98,7 @@ static struct resource irqpin0_resources[] __initdata = { DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */ }; -void __init r8a7779_init_irq_extpin(int irlm) +void __init r8a7779_init_irq_extpin_dt(int irlm) { void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); u32 tmp; @@ -116,7 +116,11 @@ void __init r8a7779_init_irq_extpin(int irlm) tmp |= (1 << 21); /* LVLMODE = 1 */ iowrite32(tmp, icr0); iounmap(icr0); +} +void __init r8a7779_init_irq_extpin(int irlm) +{ + r8a7779_init_irq_extpin_dt(irlm); if (irlm) platform_device_register_resndata( &platform_bus, "renesas_intc_irqpin", -1, -- cgit v1.2.3 From 2349199db55bfb99e2ebdce285a7e297ba63a7ef Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 1 Oct 2013 17:13:16 +0900 Subject: ARM: shmobile: r8a7791 SMP support Tie in the APMU SMP code on r8a7791. When used together with the secondary CPU device node and smp_ops in the board specific code then this will allow use of the two Cortex-A15 cores in the r8a7791 SoC. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/include/mach/r8a7791.h | 1 + arch/arm/mach-shmobile/setup-r8a7791.c | 1 + arch/arm/mach-shmobile/smp-r8a7791.c | 62 +++++++++++++++++++++++++++ 4 files changed, 65 insertions(+) create mode 100644 arch/arm/mach-shmobile/smp-r8a7791.c (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 95e48d129ddc..f2d40edadcc9 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -40,6 +40,7 @@ smp-y := platsmp.o headsmp.o smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o platsmp-scu.o smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o platsmp-scu.o smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o platsmp-apmu.o +smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o platsmp-apmu.o smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o # IRQ objects diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h index 2a86a5394672..051ead3c286e 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7791.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h @@ -5,5 +5,6 @@ void r8a7791_add_standard_devices(void); void r8a7791_add_dt_devices(void); void r8a7791_clock_init(void); void r8a7791_init_early(void); +extern struct smp_operations r8a7791_smp_ops; #endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index cb3859b4cc95..d9393d61ee27 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -176,6 +176,7 @@ static const char *r8a7791_boards_compat_dt[] __initdata = { }; DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)") + .smp = smp_ops(r8a7791_smp_ops), .init_early = r8a7791_init_early, .init_time = rcar_gen2_timer_init, .dt_compat = r8a7791_boards_compat_dt, diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c new file mode 100644 index 000000000000..2df5bd190fe4 --- /dev/null +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -0,0 +1,62 @@ +/* + * SMP support for r8a7791 + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include + +#define RST 0xe6160000 +#define CA15BAR 0x0020 +#define CA15RESCNT 0x0040 +#define RAM 0xe6300000 + +static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) +{ + void __iomem *p; + u32 bar; + + /* let APMU code install data related to shmobile_boot_vector */ + shmobile_smp_apmu_prepare_cpus(max_cpus); + + /* RAM for jump stub, because BAR requires 256KB aligned address */ + p = ioremap_nocache(RAM, shmobile_boot_size); + memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); + iounmap(p); + + /* setup reset vectors */ + p = ioremap_nocache(RST, 0x63); + bar = (RAM >> 8) & 0xfffffc00; + writel_relaxed(bar, p + CA15BAR); + writel_relaxed(bar | 0x10, p + CA15BAR); + + /* enable clocks to all CPUs */ + writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, + p + CA15RESCNT); + iounmap(p); +} + +struct smp_operations r8a7791_smp_ops __initdata = { + .smp_prepare_cpus = r8a7791_smp_prepare_cpus, + .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = shmobile_smp_cpu_disable, + .cpu_die = shmobile_smp_apmu_cpu_die, + .cpu_kill = shmobile_smp_apmu_cpu_kill, +#endif +}; -- cgit v1.2.3 From 7a2a7a371145e83ad60482313e8cd7501994df3a Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 22 Jul 2013 15:16:16 +0200 Subject: ARM: shmobile: ape6evm: add DMA support to MMCIF Add DMA support for MMCIF on APE6EVM, using the shdma dmaengine driver. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-ape6evm.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c index 7627385f516e..2de4b097aa1b 100644 --- a/arch/arm/mach-shmobile/board-ape6evm.c +++ b/arch/arm/mach-shmobile/board-ape6evm.c @@ -162,6 +162,8 @@ static struct regulator_consumer_supply vcc_sdhi1_consumers[] = /* MMCIF */ static const struct sh_mmcif_plat_data mmcif0_pdata __initconst = { .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .slave_id_tx = SHDMA_SLAVE_MMCIF0_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF0_RX, .ccs_unsupported = true, }; -- cgit v1.2.3 From 5d6aa3435275a5308684f90c17424b055ef7f572 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Sun, 25 Aug 2013 01:36:38 +0400 Subject: ARM: shmobile: bockw: enable DMA for SDHI0 Pass HPB-DMA slave IDs in the SDHI0 platform data to enable DMA in the SDHI driver. Signed-off-by: Max Filippov [Sergei: removed #include ] Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-bockw.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index 330e84c14f8e..421cf1c229dc 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -196,6 +196,8 @@ static struct rcar_phy_platform_data usb_phy_platform_data __initdata = /* SDHI */ static struct sh_mobile_sdhi_info sdhi0_info __initdata = { + .dma_slave_tx = HPBDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = HPBDMA_SLAVE_SDHI0_RX, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, -- cgit v1.2.3 From e6a8b11b82fdeaa78dad52552f945b772ee1a5c9 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Sun, 25 Aug 2013 21:47:26 +0400 Subject: ARM: shmobile: marzen: enable DMA for SDHI0 Pass HPB-DMA slave IDs in the SDHI0 platform data to enable DMA in the SDHI driver. Signed-off-by: Max Filippov [Sergei: removed #include ] Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-marzen.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 434b213cc738..da1352f5f71b 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -125,6 +125,8 @@ static struct resource sdhi0_resources[] = { }; static struct sh_mobile_sdhi_info sdhi0_platform_data = { + .dma_slave_tx = HPBDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = HPBDMA_SLAVE_SDHI0_RX, .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, }; -- cgit v1.2.3 From a4ed412ed5934127ba88ba007b9a00617ae47f75 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 19 Sep 2013 05:11:29 +0900 Subject: ARM: shmobile: Genmai support Genmai base board support making use of 128 MiB of memory, the r7s7211 SoC with the SCIF2 serial port and CA9 core. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/r7s72100-genmai.dts | 31 +++++++++++++++++++++++++ arch/arm/mach-shmobile/Kconfig | 5 ++++ arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/Makefile.boot | 1 + arch/arm/mach-shmobile/board-genmai.c | 43 +++++++++++++++++++++++++++++++++++ 6 files changed, 82 insertions(+) create mode 100644 arch/arm/boot/dts/r7s72100-genmai.dts create mode 100644 arch/arm/mach-shmobile/board-genmai.c (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3b1c462e8575..295824d8410b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -196,6 +196,7 @@ dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ emev2-kzm9d-reference.dtb \ + r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts new file mode 100644 index 000000000000..1fb20f2333cc --- /dev/null +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -0,0 +1,31 @@ +/* + * Device Tree Source for the Genmai board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r7s72100.dtsi" + +/ { + model = "Genmai"; + compatible = "renesas,genmai", "renesas,r7s72100"; + + chosen { + bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory { + device_type = "memory"; + reg = <0x08000000 0x08000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 6e7d0a9b0be9..6a684ff62124 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -191,6 +191,11 @@ config MACH_BOCKW_REFERENCE This is intended to aid developers +config MACH_GENMAI + bool "Genmai board" + depends on ARCH_R7S72100 + select USE_OF + config MACH_MARZEN bool "MARZEN board" depends on ARCH_R8A7779 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 663f8941153a..b3840ba1a445 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_BOCKW) += board-bockw.o obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o +obj-$(CONFIG_MACH_GENMAI) += board-genmai.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o obj-$(CONFIG_MACH_LAGER) += board-lager.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 60e29e6c1126..c690b500eb61 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -6,6 +6,7 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 +loadaddr-$(CONFIG_MACH_GENMAI) += 0x8008000 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000 diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c new file mode 100644 index 000000000000..3e92e3c62d4c --- /dev/null +++ b/arch/arm/mach-shmobile/board-genmai.c @@ -0,0 +1,43 @@ +/* + * Genmai board support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include + +static void __init genmai_add_standard_devices(void) +{ + r7s72100_clock_init(); + r7s72100_add_dt_devices(); +} + +static const char * const genmai_boards_compat_dt[] __initconst = { + "renesas,genmai", + NULL, +}; + +DT_MACHINE_START(GENMAI_DT, "genmai") + .init_early = r7s72100_init_early, + .init_machine = genmai_add_standard_devices, + .dt_compat = genmai_boards_compat_dt, +MACHINE_END -- cgit v1.2.3 From 0749bead08db4e01588437a05a126bf4774dae23 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 1 Oct 2013 17:12:02 +0900 Subject: ARM: shmobile: Use r8a7791_add_standard_devices() on Koelsch Use r8a7791_add_standard_devices() on Koelsch to let the C version of the board code add on-chip devices. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-koelsch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index cc2d5e82b59a..278f12e88398 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -29,7 +29,7 @@ static void __init koelsch_add_standard_devices(void) { r8a7791_clock_init(); - r8a7791_add_dt_devices(); + r8a7791_add_standard_devices(); } static const char * const koelsch_boards_compat_dt[] __initconst = { -- cgit v1.2.3 From f9c9eb7e768d049d2ae360be9e09f6a0be03e317 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 1 Oct 2013 17:12:57 +0900 Subject: ARM: shmobile: Use arch timer on Koelsch Make use of the R-Car Gen2 arch timer workaround on Koelsch. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-koelsch.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index 278f12e88398..ea5846e2e88c 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -40,5 +41,6 @@ static const char * const koelsch_boards_compat_dt[] __initconst = { DT_MACHINE_START(KOELSCH_DT, "koelsch") .init_early = r8a7791_init_early, .init_machine = koelsch_add_standard_devices, + .init_time = rcar_gen2_timer_init, .dt_compat = koelsch_boards_compat_dt, MACHINE_END -- cgit v1.2.3 From 3ae970a688f8f8a74d1b489b8646733a830c904b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 1 Oct 2013 19:33:15 +0900 Subject: ARM: shmobile: Use KZM9D without reference for multiplatform Change the multiplatform kconfig bits for KZM9D from CONFIG_MACH_KZM9D_REFERENCE into CONFIG_MACH_KZM9D to match the non-multiplatform case. Signed-off-by: Magnus Damm Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/Kconfig | 10 ++-------- arch/arm/mach-shmobile/Makefile | 4 ++++ 2 files changed, 6 insertions(+), 8 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 6a684ff62124..c9c4f15483bd 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -22,16 +22,10 @@ config ARCH_EMEV2 comment "SH-Mobile Board Type" -config MACH_KZM9D_REFERENCE - bool "KZM9D board - Reference Device Tree Implementation" +config MACH_KZM9D + bool "KZM9D board" depends on ARCH_EMEV2 select REGULATOR_FIXED_VOLTAGE if REGULATOR - ---help--- - Use reference implementation of KZM9D board support - which makes a greater use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers comment "SH-Mobile System Configuration" endif diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index b3840ba1a445..b11466d4d944 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -55,6 +55,9 @@ obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o pm-rmobile.o obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o # Board objects +ifdef CONFIG_ARCH_SHMOBILE_MULTI +obj-$(CONFIG_MACH_KZM9D) += board-kzm9d-reference.o +else obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o @@ -72,6 +75,7 @@ obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o obj-$(CONFIG_MACH_KZM9D_REFERENCE) += board-kzm9d-reference.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o +endif # Framework support obj-$(CONFIG_SMP) += $(smp-y) -- cgit v1.2.3 From df8ee58d73ae8590bc4c9ddbe19211e4485f9d17 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 1 Oct 2013 19:33:24 +0900 Subject: ARM: shmobile: Remove non-multiplatform KZM9D reference support Now when CCF is supported remove the legacy KZM9D reference Kconfig bits CONFIG_MACH_KZM9D_REFERENCE for the non-multiplatform case. Starting from this commit KZM9D board support is always enabled via CONFIG_MACH_KZM9D, and CONFIG_ARCH_MULTIPLATFORM is used to select between board-kzm9d.c and board-kzm9d-reference.c The file board-kzm9d-reference.c can no longer be used together with the legacy sh-clk clock framework, instead CCF is used. Signed-off-by: Magnus Damm Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/Kconfig | 12 ------------ arch/arm/mach-shmobile/Makefile | 1 - arch/arm/mach-shmobile/Makefile.boot | 1 - 3 files changed, 14 deletions(-) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index c9c4f15483bd..a4a4b75109b2 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -237,18 +237,6 @@ config MACH_KZM9D select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF -config MACH_KZM9D_REFERENCE - bool "KZM9D board - Reference Device Tree Implementation" - depends on ARCH_EMEV2 - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select USE_OF - ---help--- - Use reference implementation of KZM9D board support - which makes a greater use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - config MACH_KZM9G bool "KZM-A9-GT board" depends on ARCH_SH73A0 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index b11466d4d944..51db2bcafabf 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -72,7 +72,6 @@ obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o -obj-$(CONFIG_MACH_KZM9D_REFERENCE) += board-kzm9d-reference.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o endif diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index c690b500eb61..391d72a5536c 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -9,7 +9,6 @@ loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 loadaddr-$(CONFIG_MACH_GENMAI) += 0x8008000 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000 -loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 -- cgit v1.2.3 From 91f6c56152c7d8ab874dbbf8146a6727d4dff426 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 1 Oct 2013 19:33:34 +0900 Subject: ARM: shmobile: Let KZM9D multiplatform boot with KZM9D DTB Let the multiplatform KZM9D support boot with the legacy DTS for KZM9D as well as the KZM9D reference DTS. Signed-off-by: Magnus Damm Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-kzm9d-reference.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c index 8f8bb2fab076..054d8d5c8fc1 100644 --- a/arch/arm/mach-shmobile/board-kzm9d-reference.c +++ b/arch/arm/mach-shmobile/board-kzm9d-reference.c @@ -33,6 +33,7 @@ static void __init kzm9d_add_standard_devices(void) } static const char *kzm9d_boards_compat_dt[] __initdata = { + "renesas,kzm9d", "renesas,kzm9d-reference", NULL, }; -- cgit v1.2.3 From b6d5a1b1c3476225e897a2f706c0e7eca7b05984 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 1 Oct 2013 17:13:26 +0900 Subject: ARM: shmobile: Use SMP on Koelsch Enable r8a7791 SMP support code on the Koelsch board. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-koelsch.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index ea5846e2e88c..ace1711a6cd8 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -39,6 +39,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(KOELSCH_DT, "koelsch") + .smp = smp_ops(r8a7791_smp_ops), .init_early = r8a7791_init_early, .init_machine = koelsch_add_standard_devices, .init_time = rcar_gen2_timer_init, -- cgit v1.2.3 From 90357fcbf2fcb9e50899fd3b2a91a6dc3cfe5ea5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 2 Oct 2013 01:33:36 -0700 Subject: ARM: shmobile: bockw: add SMSC support on reference This patch enables INTC IRQ, and SMSC IRQ. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-bockw-reference.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c index 1a7c893e1a52..ae88fdad4b3a 100644 --- a/arch/arm/mach-shmobile/board-bockw-reference.c +++ b/arch/arm/mach-shmobile/board-bockw-reference.c @@ -36,15 +36,35 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { "scif0_ctrl", "scif0"), }; +#define FPGA 0x18200000 +#define IRQ0MR 0x30 +#define COMCTLR 0x101c static void __init bockw_init(void) { + static void __iomem *fpga; + r8a7778_clock_init(); + r8a7778_init_irq_extpin_dt(1); pinctrl_register_mappings(bockw_pinctrl_map, ARRAY_SIZE(bockw_pinctrl_map)); r8a7778_pinmux_init(); r8a7778_add_dt_devices(); + fpga = ioremap_nocache(FPGA, SZ_1M); + if (fpga) { + /* + * CAUTION + * + * IRQ0/1 is cascaded interrupt from FPGA. + * it should be cared in the future + * Now, it is assuming IRQ0 was used only from SMSC. + */ + u16 val = ioread16(fpga + IRQ0MR); + val &= ~(1 << 4); /* enable SMSC911x */ + iowrite16(val, fpga + IRQ0MR); + } + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -- cgit v1.2.3 From 7d4bde88e1135c4a3106b79650d3b85335f35717 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 2 Oct 2013 01:39:48 -0700 Subject: ARM: shmobile: marzen: enable INTC IRQ This patch adds missing INTC IRQ settings which is required from SMSC. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-marzen-reference.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-shmobile') diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c index 3f4250a2d4eb..2773936bf7dc 100644 --- a/arch/arm/mach-shmobile/board-marzen-reference.c +++ b/arch/arm/mach-shmobile/board-marzen-reference.c @@ -28,6 +28,7 @@ static void __init marzen_init(void) { r8a7779_add_standard_devices_dt(); + r8a7779_init_irq_extpin_dt(1); /* IRQ1 as individual interrupt */ } static const char *marzen_boards_compat_dt[] __initdata = { -- cgit v1.2.3