From 784c33a0c9b509f09cb69bc93f3863ed20338462 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 7 Dec 2013 02:17:44 +0100 Subject: ARM: shmobile: koelsch: Add DU device Only the LVDS output is currently supported. Signed-off-by: Laurent Pinchart Acked-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-koelsch.c | 63 ++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) (limited to 'arch/arm/mach-shmobile/board-koelsch.c') diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index 6e12914d6d58..5d84fb6f3c5c 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -19,6 +19,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include #include #include @@ -26,13 +27,66 @@ #include #include #include +#include #include #include +#include #include #include #include #include +/* DU */ +static struct rcar_du_encoder_data koelsch_du_encoders[] = { + { + .type = RCAR_DU_ENCODER_NONE, + .output = RCAR_DU_OUTPUT_LVDS0, + .connector.lvds.panel = { + .width_mm = 210, + .height_mm = 158, + .mode = { + .clock = 65000, + .hdisplay = 1024, + .hsync_start = 1048, + .hsync_end = 1184, + .htotal = 1344, + .vdisplay = 768, + .vsync_start = 771, + .vsync_end = 777, + .vtotal = 806, + .flags = 0, + }, + }, + }, +}; + +static const struct rcar_du_platform_data koelsch_du_pdata __initconst = { + .encoders = koelsch_du_encoders, + .num_encoders = ARRAY_SIZE(koelsch_du_encoders), +}; + +static const struct resource du_resources[] __initconst = { + DEFINE_RES_MEM(0xfeb00000, 0x40000), + DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"), + DEFINE_RES_IRQ(gic_spi(256)), + DEFINE_RES_IRQ(gic_spi(268)), +}; + +static void __init koelsch_add_du_device(void) +{ + struct platform_device_info info = { + .name = "rcar-du-r8a7791", + .id = -1, + .res = du_resources, + .num_res = ARRAY_SIZE(du_resources), + .data = &koelsch_du_pdata, + .size_data = sizeof(koelsch_du_pdata), + .dma_mask = DMA_BIT_MASK(32), + }; + + platform_device_register_full(&info); +} + /* LEDS */ static struct gpio_led koelsch_leds[] = { { @@ -80,6 +134,13 @@ static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = { }; static const struct pinctrl_map koelsch_pinctrl_map[] = { + /* DU */ + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", + "du_rgb666", "du"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", + "du_sync", "du"), + PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", + "du_clk_out_0", "du"), /* SCIF0 (CN19: DEBUG SERIAL0) */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791", "scif0_data_d", "scif0"), @@ -101,6 +162,8 @@ static void __init koelsch_add_standard_devices(void) platform_device_register_data(&platform_bus, "gpio-keys", -1, &koelsch_keys_pdata, sizeof(koelsch_keys_pdata)); + + koelsch_add_du_device(); } static const char * const koelsch_boards_compat_dt[] __initconst = { -- cgit v1.2.3