From 2dc6c6f15da97cb3e810963c80e981f19d42cd7d Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 21 May 2010 03:12:44 +0200 Subject: [ARM] pata_pxa: DMA-capable PATA driver This patch adds a driver for a harddrive attached to PXA address and data bus. Unlike pata_platform, this driver allows usage of PXA DMA controller, making the transmission speed 3x higher. Signed-off-by: Marek Vasut Acked-by: Jeff Garzik Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/pata_pxa.h | 33 +++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 arch/arm/mach-pxa/include/mach/pata_pxa.h (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/include/mach/pata_pxa.h b/arch/arm/mach-pxa/include/mach/pata_pxa.h new file mode 100644 index 000000000000..6cf7df1d5830 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pata_pxa.h @@ -0,0 +1,33 @@ +/* + * Generic PXA PATA driver + * + * Copyright (C) 2010 Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MACH_PATA_PXA_H__ +#define __MACH_PATA_PXA_H__ + +struct pata_pxa_pdata { + /* PXA DMA DREQ<0:2> pin */ + uint32_t dma_dreq; + /* Register shift */ + uint32_t reg_shift; + /* IRQ flags */ + uint32_t irq_flags; +}; + +#endif /* __MACH_PATA_PXA_H__ */ -- cgit v1.2.3 From f95bb54016ae2465a74f5eeb04b539ef213ce6c9 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 22 May 2010 00:29:33 +0200 Subject: [ARM] pxa/colibri270: Refactor board definition file This patch just moves code around and polishes it. Also, compile in only selected pieces of hardware. Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/colibri-pxa270.c | 69 +++++++++++++++++++------------- arch/arm/mach-pxa/include/mach/colibri.h | 9 +---- 2 files changed, 43 insertions(+), 35 deletions(-) (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 061c45316de8..f8b3bfba3d91 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -3,6 +3,7 @@ * * Support for Toradex PXA270 based Colibri module * Daniel Mack + * Marek Vasut * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -36,23 +37,25 @@ #include "generic.h" #include "devices.h" -/* - * GPIO configuration - */ +/****************************************************************************** + * Pin configuration + ******************************************************************************/ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = { + /* Ethernet */ GPIO78_nCS_2, /* Ethernet CS */ GPIO114_GPIO, /* Ethernet IRQ */ }; -/* - * NOR flash - */ +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition colibri_partitions[] = { { .name = "Bootloader", .offset = 0x00000000, .size = 0x00040000, - .mask_flags = MTD_WRITEABLE /* force read-only */ + .mask_flags = MTD_WRITEABLE /* force read-only */ }, { .name = "Kernel", .offset = 0x00040000, @@ -90,42 +93,50 @@ static struct platform_device colibri_pxa270_flash_device = { .num_resources = 1, }; -/* - * DM9000 Ethernet - */ -#if defined(CONFIG_DM9000) -static struct resource dm9000_resources[] = { +static void __init colibri_pxa270_nor_init(void) +{ + platform_device_register(&colibri_pxa270_flash_device); +} +#else +static inline void colibri_pxa270_nor_init(void) {} +#endif + +/****************************************************************************** + * Ethernet + ******************************************************************************/ +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource colibri_pxa270_dm9000_resources[] = { [0] = { - .start = COLIBRI_PXA270_ETH_PHYS, - .end = COLIBRI_PXA270_ETH_PHYS + 3, + .start = PXA_CS2_PHYS, + .end = PXA_CS2_PHYS + 3, .flags = IORESOURCE_MEM, }, [1] = { - .start = COLIBRI_PXA270_ETH_PHYS + 4, - .end = COLIBRI_PXA270_ETH_PHYS + 4 + 500, + .start = PXA_CS2_PHYS + 4, + .end = PXA_CS2_PHYS + 4 + 500, .flags = IORESOURCE_MEM, }, [2] = { - .start = COLIBRI_PXA270_ETH_IRQ, - .end = COLIBRI_PXA270_ETH_IRQ, + .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), + .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, }, }; -static struct platform_device dm9000_device = { +static struct platform_device colibri_pxa270_dm9000_device = { .name = "dm9000", .id = -1, - .num_resources = ARRAY_SIZE(dm9000_resources), - .resource = dm9000_resources, + .num_resources = ARRAY_SIZE(colibri_pxa270_dm9000_resources), + .resource = colibri_pxa270_dm9000_resources, }; -#endif /* CONFIG_DM9000 */ -static struct platform_device *colibri_pxa270_devices[] __initdata = { - &colibri_pxa270_flash_device, -#if defined(CONFIG_DM9000) - &dm9000_device, +static void __init colibri_pxa270_eth_init(void) +{ + platform_device_register(&colibri_pxa270_dm9000_device); +} +#else +static inline void colibri_pxa270_eth_init(void) {} #endif -}; static void __init colibri_pxa270_init(void) { @@ -133,7 +144,9 @@ static void __init colibri_pxa270_init(void) pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices)); + + colibri_pxa270_nor_init(); + colibri_pxa270_eth_init(); } MACHINE_START(COLIBRI, "Toradex Colibri PXA270") diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 5f2ba8d9015c..9e47e1fb1f04 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -33,13 +33,8 @@ static inline void colibri_pxa3xx_init_nand(void) {} /* physical memory regions */ #define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ -/* definitions for Colibri PXA270 */ - -#define COLIBRI_PXA270_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ -#define COLIBRI_PXA270_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet */ -#define COLIBRI_PXA270_ETH_IRQ_GPIO 114 -#define COLIBRI_PXA270_ETH_IRQ \ - gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO)) +/* GPIO definitions for Colibri PXA270 */ +#define GPIO114_COLIBRI_PXA270_ETH_IRQ 114 #endif /* _COLIBRI_H_ */ -- cgit v1.2.3 From d01b8d64949dd39ffe2cbe8068b82fb83f82f43c Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 22 May 2010 00:29:34 +0200 Subject: [ARM] pxa/colibri270: Add MMC support Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/colibri-pxa270.c | 31 +++++++++++++++++++++++++++++++ arch/arm/mach-pxa/include/mach/colibri.h | 1 + 2 files changed, 32 insertions(+) (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index f8b3bfba3d91..cbaf0196c747 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -33,6 +33,7 @@ #include #include +#include #include "generic.h" #include "devices.h" @@ -44,6 +45,15 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = { /* Ethernet */ GPIO78_nCS_2, /* Ethernet CS */ GPIO114_GPIO, /* Ethernet IRQ */ + + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO0_GPIO, /* SD detect */ }; /****************************************************************************** @@ -138,6 +148,26 @@ static void __init colibri_pxa270_eth_init(void) static inline void colibri_pxa270_eth_init(void) {} #endif +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data colibri_pxa270_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_power = -1, + .gpio_card_detect = GPIO0_COLIBRI_PXA270_SD_DETECT, + .gpio_card_ro = -1, + .detect_delay_ms = 200, +}; + +static void __init colibri_pxa270_mmc_init(void) +{ + pxa_set_mci_info(&colibri_pxa270_mci_platform_data); +} +#else +static inline void colibri_pxa270_mmc_init(void) {} +#endif + static void __init colibri_pxa270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config)); @@ -147,6 +177,7 @@ static void __init colibri_pxa270_init(void) colibri_pxa270_nor_init(); colibri_pxa270_eth_init(); + colibri_pxa270_mmc_init(); } MACHINE_START(COLIBRI, "Toradex Colibri PXA270") diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 9e47e1fb1f04..c5492366349a 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -35,6 +35,7 @@ static inline void colibri_pxa3xx_init_nand(void) {} /* GPIO definitions for Colibri PXA270 */ #define GPIO114_COLIBRI_PXA270_ETH_IRQ 114 +#define GPIO0_COLIBRI_PXA270_SD_DETECT 0 #endif /* _COLIBRI_H_ */ -- cgit v1.2.3 From 7cca84abf49afe28f3e81531f79b2cb4dd6cba1b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 22 May 2010 00:29:37 +0200 Subject: [ARM] pxa/colibri270: Add TSC support Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/colibri-pxa270.c | 42 ++++++++++++++++++++++++++++++++ arch/arm/mach-pxa/include/mach/colibri.h | 1 + 2 files changed, 43 insertions(+) (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 22105d63942c..99d511cf0a82 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -31,6 +32,7 @@ #include #include +#include #include #include #include @@ -66,6 +68,15 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = { GPIO89_USBH1_PEN, GPIO119_USBH2_PWR, GPIO120_USBH2_PEN, + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, + GPIO98_AC97_SYSCLK, + GPIO113_GPIO, /* Touchscreen IRQ */ }; /****************************************************************************** @@ -205,6 +216,36 @@ static void __init colibri_pxa270_uhc_init(void) static inline void colibri_pxa270_uhc_init(void) {} #endif +/****************************************************************************** + * Audio and Touchscreen + ******************************************************************************/ +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ + defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) +static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = { + .irq = gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ), +}; + +static struct platform_device colibri_pxa270_ucb1400_device = { + .name = "ucb1400_core", + .id = -1, + .dev = { + .platform_data = &colibri_pxa270_ucb1400_pdata, + }, +}; + +static void __init colibri_pxa270_tsc_init(void) +{ + pxa_set_ac97_info(&colibri_pxa270_ac97_pdata); + platform_device_register(&colibri_pxa270_ucb1400_device); +} +#else +static inline void colibri_pxa270_tsc_init(void) {} +#endif + static void __init colibri_pxa270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config)); @@ -216,6 +257,7 @@ static void __init colibri_pxa270_init(void) colibri_pxa270_eth_init(); colibri_pxa270_mmc_init(); colibri_pxa270_uhc_init(); + colibri_pxa270_tsc_init(); } MACHINE_START(COLIBRI, "Toradex Colibri PXA270") diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index c5492366349a..8579b1006791 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -36,6 +36,7 @@ static inline void colibri_pxa3xx_init_nand(void) {} /* GPIO definitions for Colibri PXA270 */ #define GPIO114_COLIBRI_PXA270_ETH_IRQ 114 #define GPIO0_COLIBRI_PXA270_SD_DETECT 0 +#define GPIO113_COLIBRI_PXA270_TS_IRQ 113 #endif /* _COLIBRI_H_ */ -- cgit v1.2.3 From 4c243c8584be9fbff9e11fc37fa2449448c5d442 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sat, 22 May 2010 00:29:38 +0200 Subject: [ARM] pxa/colibri270: Split module and base board code Follow the idea of several MX31 based boards and split code that is related to the module from code that is baseboard specific. This makes adding new base board support easier, while avoiding code duplication. Signed-off-by: Daniel Mack Acked-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/Kconfig | 4 + arch/arm/mach-pxa/Makefile | 3 +- arch/arm/mach-pxa/colibri-pxa270-evalboard.c | 111 +++++++++++++++++++++++++++ arch/arm/mach-pxa/colibri-pxa270.c | 107 +++++--------------------- arch/arm/mach-pxa/include/mach/colibri.h | 14 ++++ 5 files changed, 151 insertions(+), 88 deletions(-) create mode 100644 arch/arm/mach-pxa/colibri-pxa270-evalboard.c (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3b51741a4810..819b44fe4081 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -238,6 +238,10 @@ config MACH_COLIBRI bool "Toradex Colibri PXA270" select PXA27x +config MACH_COLIBRI_PXA270_EVALBOARD + bool "Toradex Colibri Evaluation Carrier Board support (PXA270)" + depends on MACH_COLIBRI + config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" select PXA3xx diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index b8f1f4bc7ca7..4751c9de5c60 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -58,7 +58,8 @@ obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_PCM027) += pcm027.o obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o -obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o +obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o +obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o obj-$(CONFIG_MACH_VPAC270) += vpac270.o diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c new file mode 100644 index 000000000000..0f3b632c3b14 --- /dev/null +++ b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c @@ -0,0 +1,111 @@ +/* + * linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c + * + * Support for Toradex PXA270 based Colibri Evaluation Carrier Board + * Daniel Mack + * Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO0_GPIO, /* SD detect */ + + /* FFUART */ + GPIO39_FFUART_TXD, + GPIO34_FFUART_RXD, + + /* UHC */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + GPIO119_USBH2_PWR, + GPIO120_USBH2_PEN, +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data colibri_pxa270_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_power = -1, + .gpio_card_detect = GPIO0_COLIBRI_PXA270_SD_DETECT, + .gpio_card_ro = -1, + .detect_delay_ms = 200, +}; + +static void __init colibri_pxa270_mmc_init(void) +{ + pxa_set_mci_info(&colibri_pxa270_mci_platform_data); +} +#else +static inline void colibri_pxa270_mmc_init(void) {} +#endif + +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static int colibri_pxa270_ohci_init(struct device *dev) +{ + UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; + return 0; +} + +static struct pxaohci_platform_data colibri_pxa270_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | ENABLE_PORT2 | + POWER_CONTROL_LOW | POWER_SENSE_LOW, + .init = colibri_pxa270_ohci_init, +}; + +static void __init colibri_pxa270_uhc_init(void) +{ + pxa_set_ohci_info(&colibri_pxa270_ohci_info); +} +#else +static inline void colibri_pxa270_uhc_init(void) {} +#endif + +void __init colibri_pxa270_evalboard_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + + colibri_pxa270_mmc_init(); + colibri_pxa270_uhc_init(); +} + diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 99d511cf0a82..b4f53ccf3e80 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -11,36 +11,26 @@ */ #include -#include -#include -#include #include -#include -#include -#include +#include #include #include #include -#include +#include +#include #include -#include -#include -#include -#include + #include -#include -#include #include +#include +#include #include -#include #include -#include -#include -#include +#include -#include "generic.h" #include "devices.h" +#include "generic.h" /****************************************************************************** * Pin configuration @@ -50,25 +40,6 @@ static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = { GPIO78_nCS_2, /* Ethernet CS */ GPIO114_GPIO, /* Ethernet IRQ */ - /* MMC */ - GPIO32_MMC_CLK, - GPIO92_MMC_DAT_0, - GPIO109_MMC_DAT_1, - GPIO110_MMC_DAT_2, - GPIO111_MMC_DAT_3, - GPIO112_MMC_CMD, - GPIO0_GPIO, /* SD detect */ - - /* FFUART */ - GPIO39_FFUART_TXD, - GPIO34_FFUART_RXD, - - /* UHC */ - GPIO88_USBH1_PWR, - GPIO89_USBH1_PEN, - GPIO119_USBH2_PWR, - GPIO120_USBH2_PEN, - /* AC97 */ GPIO28_AC97_BITCLK, GPIO29_AC97_SDATA_IN_0, @@ -171,51 +142,6 @@ static void __init colibri_pxa270_eth_init(void) static inline void colibri_pxa270_eth_init(void) {} #endif -/****************************************************************************** - * SD/MMC card controller - ******************************************************************************/ -#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) -static struct pxamci_platform_data colibri_pxa270_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .gpio_power = -1, - .gpio_card_detect = GPIO0_COLIBRI_PXA270_SD_DETECT, - .gpio_card_ro = -1, - .detect_delay_ms = 200, -}; - -static void __init colibri_pxa270_mmc_init(void) -{ - pxa_set_mci_info(&colibri_pxa270_mci_platform_data); -} -#else -static inline void colibri_pxa270_mmc_init(void) {} -#endif - -/****************************************************************************** - * USB Host - ******************************************************************************/ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static int colibri_pxa270_ohci_init(struct device *dev) -{ - UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; - return 0; -} - -static struct pxaohci_platform_data colibri_pxa270_ohci_info = { - .port_mode = PMM_PERPORT_MODE, - .flags = ENABLE_PORT1 | ENABLE_PORT2 | - POWER_CONTROL_LOW | POWER_SENSE_LOW, - .init = colibri_pxa270_ohci_init, -}; - -static void __init colibri_pxa270_uhc_init(void) -{ - pxa_set_ohci_info(&colibri_pxa270_ohci_info); -} -#else -static inline void colibri_pxa270_uhc_init(void) {} -#endif - /****************************************************************************** * Audio and Touchscreen ******************************************************************************/ @@ -246,18 +172,25 @@ static void __init colibri_pxa270_tsc_init(void) static inline void colibri_pxa270_tsc_init(void) {} #endif +static int colibri_pxa270_baseboard; +core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444); + static void __init colibri_pxa270_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config)); - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); colibri_pxa270_nor_init(); colibri_pxa270_eth_init(); - colibri_pxa270_mmc_init(); - colibri_pxa270_uhc_init(); colibri_pxa270_tsc_init(); + + switch (colibri_pxa270_baseboard) { + case COLIBRI_PXA270_EVALBOARD: + colibri_pxa270_evalboard_init(); + break; + default: + printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n", + colibri_pxa270_baseboard); + } } MACHINE_START(COLIBRI, "Toradex Colibri PXA270") diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 8579b1006791..6434f66824b3 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -4,6 +4,20 @@ #include #include +/* + * base board glue for PXA270 module + */ + +enum { + COLIBRI_PXA270_EVALBOARD = 0, +}; + +#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) +extern void colibri_pxa270_evalboard_init(void); +#else +static inline void colibri_pxa270_evalboard_init(void) {} +#endif + /* * common settings for all modules */ -- cgit v1.2.3 From 403d29713e0a5c671d852913a0b5935c0ff00cb7 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 22 May 2010 00:29:39 +0200 Subject: [ARM] pxa/income: Add Income SBC support This is support for custom design based on Toradex Colibri PXA270 CPU card. Initial patch was by Pavel Revak. [daniel - rebased the code to follow the module/board split] Signed-off-by: Marek Vasut Cc: Pavel Revak Cc: Daniel Mack Signed-off-by: Eric Miao --- MAINTAINERS | 7 + arch/arm/mach-pxa/Kconfig | 7 + arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/colibri-pxa270-income.c | 272 ++++++++++++++++++++++++++++++ arch/arm/mach-pxa/colibri-pxa270.c | 29 +++- arch/arm/mach-pxa/include/mach/colibri.h | 7 + 6 files changed, 320 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-pxa/colibri-pxa270-income.c (limited to 'arch/arm/mach-pxa/include') diff --git a/MAINTAINERS b/MAINTAINERS index 6d119c98b89b..870940ab090b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -695,6 +695,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git F: arch/arm/mach-sa1100/jornada720.c F: arch/arm/mach-sa1100/include/mach/jornada720.h +ARM/INCOME PXA270 SUPPORT +M: Marek Vasut +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-pxa/income.c +F: arch/arm/mach-pxa/include/mach-pxa/income.h + ARM/INTEL IOP32X ARM ARCHITECTURE M: Lennert Buytenhek M: Dan Williams diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 819b44fe4081..2ff0b325a7d5 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -242,6 +242,13 @@ config MACH_COLIBRI_PXA270_EVALBOARD bool "Toradex Colibri Evaluation Carrier Board support (PXA270)" depends on MACH_COLIBRI +config MACH_COLIBRI_PXA270_INCOME + bool "Income s.r.o. PXA270 SBC" + depends on MACH_COLIBRI + select PXA27x + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" select PXA3xx diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 4751c9de5c60..66e8989b8ef2 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_MACH_PCM027) += pcm027.o obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) += colibri-pxa270-evalboard.o +obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o obj-$(CONFIG_MACH_VPAC270) += vpac270.o diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c new file mode 100644 index 000000000000..37f0f3ed7c61 --- /dev/null +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -0,0 +1,272 @@ +/* + * linux/arch/arm/mach-pxa/income.c + * + * Support for Income s.r.o. SH-Dmaster PXA270 SBC + * + * Copyright (C) 2010 + * Marek Vasut + * Pavel Revak + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "devices.h" +#include "generic.h" + +#define GPIO114_INCOME_ETH_IRQ (114) +#define GPIO0_INCOME_SD_DETECT (0) +#define GPIO0_INCOME_SD_RO (1) +#define GPIO54_INCOME_LED_A (54) +#define GPIO55_INCOME_LED_B (55) +#define GPIO113_INCOME_TS_IRQ (113) + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static mfp_cfg_t income_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO0_GPIO, /* SD detect */ + GPIO1_GPIO, /* SD read-only */ + + /* FFUART */ + GPIO39_FFUART_TXD, + GPIO34_FFUART_RXD, + + /* BFUART */ + GPIO42_BTUART_RXD, + GPIO43_BTUART_TXD, + GPIO45_BTUART_RTS, + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* UHC */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + + /* LCD */ + GPIOxx_LCD_TFT_16BPP, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* LED */ + GPIO54_GPIO, /* LED A */ + GPIO55_GPIO, /* LED B */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data income_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_power = -1, + .gpio_card_detect = GPIO0_INCOME_SD_DETECT, + .gpio_card_ro = GPIO0_INCOME_SD_RO, + .detect_delay_ms = 200, +}; + +static void __init income_mmc_init(void) +{ + pxa_set_mci_info(&income_mci_platform_data); +} +#else +static inline void income_mmc_init(void) {} +#endif + +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static struct pxaohci_platform_data income_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW, +}; + +static void __init income_uhc_init(void) +{ + pxa_set_ohci_info(&income_ohci_info); +} +#else +static inline void income_uhc_init(void) {} +#endif + +/****************************************************************************** + * LED + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led income_gpio_leds[] = { + { + .name = "income:green:leda", + .default_trigger = "none", + .gpio = GPIO54_INCOME_LED_A, + .active_low = 1, + }, + { + .name = "income:green:ledb", + .default_trigger = "none", + .gpio = GPIO55_INCOME_LED_B, + .active_low = 1, + } +}; + +static struct gpio_led_platform_data income_gpio_led_info = { + .leds = income_gpio_leds, + .num_leds = ARRAY_SIZE(income_gpio_leds), +}; + +static struct platform_device income_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &income_gpio_led_info, + } +}; + +static void __init income_led_init(void) +{ + platform_device_register(&income_leds); +} +#else +static inline void income_led_init(void) {} +#endif + +/****************************************************************************** + * I2C + ******************************************************************************/ +#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) +static struct i2c_board_info __initdata income_i2c_devs[] = { + { + I2C_BOARD_INFO("ds1340", 0x68), + }, { + I2C_BOARD_INFO("lm75", 0x4f), + }, +}; + +static void __init income_i2c_init(void) +{ + pxa_set_i2c_info(NULL); + pxa27x_set_i2c_power_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs)); +} +#else +static inline void income_i2c_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pxafb_mode_info income_lcd_modes[] = { +{ + .pixclock = 144700, + .xres = 320, + .yres = 240, + .bpp = 32, + .depth = 18, + + .left_margin = 10, + .right_margin = 10, + .upper_margin = 7, + .lower_margin = 8, + + .hsync_len = 20, + .vsync_len = 2, + + .sync = FB_SYNC_VERT_HIGH_ACT, +}, +}; + +static struct pxafb_mach_info income_lcd_screen = { + .modes = income_lcd_modes, + .num_modes = ARRAY_SIZE(income_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL, +}; + +static void __init income_lcd_init(void) +{ + set_pxa_fb_info(&income_lcd_screen); +} +#else +static inline void income_lcd_init(void) {} +#endif + +/****************************************************************************** + * Backlight + ******************************************************************************/ +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE) +static struct platform_pwm_backlight_data income_backlight_data = { + .pwm_id = 0, + .max_brightness = 0x3ff, + .dft_brightness = 0x1ff, + .pwm_period_ns = 1000000, +}; + +static struct platform_device income_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &income_backlight_data, + }, +}; + +static void __init income_pwm_init(void) +{ + platform_device_register(&income_backlight); +} +#else +static inline void income_pwm_init(void) {} +#endif + +void __init colibri_pxa270_income_boardinit(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config)); + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + + income_mmc_init(); + income_uhc_init(); + income_led_init(); + income_i2c_init(); + income_lcd_init(); + income_pwm_init(); +} + diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index b4f53ccf3e80..98673ac6efd0 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -110,17 +110,17 @@ static inline void colibri_pxa270_nor_init(void) {} ******************************************************************************/ #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) static struct resource colibri_pxa270_dm9000_resources[] = { - [0] = { + { .start = PXA_CS2_PHYS, .end = PXA_CS2_PHYS + 3, .flags = IORESOURCE_MEM, }, - [1] = { + { .start = PXA_CS2_PHYS + 4, .end = PXA_CS2_PHYS + 4 + 500, .flags = IORESOURCE_MEM, }, - [2] = { + { .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, @@ -187,12 +187,25 @@ static void __init colibri_pxa270_init(void) case COLIBRI_PXA270_EVALBOARD: colibri_pxa270_evalboard_init(); break; + case COLIBRI_PXA270_INCOME: + colibri_pxa270_income_boardinit(); + break; default: printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n", colibri_pxa270_baseboard); } } +/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either + * with the INCOME mach type or with COLIBRI and the kernel parameter + * "colibri_pxa270_baseboard=1" + */ +static void __init colibri_pxa270_income_init(void) +{ + colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME; + colibri_pxa270_init(); +} + MACHINE_START(COLIBRI, "Toradex Colibri PXA270") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, @@ -203,3 +216,13 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") .timer = &pxa_timer, MACHINE_END +MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .init_machine = colibri_pxa270_income_init, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, +MACHINE_END + diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 6434f66824b3..58dada11054f 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -10,6 +10,7 @@ enum { COLIBRI_PXA270_EVALBOARD = 0, + COLIBRI_PXA270_INCOME, }; #if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD) @@ -18,6 +19,12 @@ extern void colibri_pxa270_evalboard_init(void); static inline void colibri_pxa270_evalboard_init(void) {} #endif +#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME) +extern void colibri_pxa270_income_boardinit(void); +#else +static inline void colibri_pxa270_income_boardinit(void) {} +#endif + /* * common settings for all modules */ -- cgit v1.2.3 From 8ae807c581338bc7d0b870bfb4c8caac3772ca64 Mon Sep 17 00:00:00 2001 From: Christoph Egger Date: Sun, 4 Jul 2010 23:27:30 +0800 Subject: [ARM] pxa: removing dead ARCH_GUMSTIX_ORIG ARCH_GUMSTIX_ORIG doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger Acked-by: Jaya Kumar Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/gumstix.h | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index 06abd4160607..9b898680b206 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -14,25 +14,15 @@ /* GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean -interrupt signal for determining cable presence. On the original gumstix, -this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F, +interrupt signal for determining cable presence. On the gumstix F, this moves to GPIO17 and GPIO37. */ /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn has detected a cable insertion; driven low otherwise. */ -#ifdef CONFIG_ARCH_GUMSTIX_ORIG - -#define GPIO_GUMSTIX_USB_GPIOn 81 -#define GPIO_GUMSTIX_USB_GPIOx 83 - -#else - #define GPIO_GUMSTIX_USB_GPIOn 35 #define GPIO_GUMSTIX_USB_GPIOx 41 -#endif - /* usb state change */ #define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) -- cgit v1.2.3 From 7166519d76109d888639c31fa5ebc03712f44f93 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Sun, 4 Jul 2010 21:01:55 +0800 Subject: [ARM] pxa/spitz: remove unused declarations Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/spitz.h | 8 -------- arch/arm/mach-pxa/spitz.c | 3 --- 2 files changed, 11 deletions(-) (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index fa1998caa78e..dc1ff254229e 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -181,11 +181,3 @@ #define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) #define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) #define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT) - -/* - * Shared data structures - */ -extern struct platform_device spitzscoop_device; -extern struct platform_device spitzscoop2_device; -extern struct platform_device spitzssp_device; -extern struct sharpsl_charger_machinfo spitz_pm_machinfo; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index c1048a35f187..ddf7a11b330e 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -242,9 +242,6 @@ static struct scoop_pcmcia_config spitz_pcmcia_config = { .power_ctrl = spitz_pcmcia_pwr, }; -EXPORT_SYMBOL(spitzscoop_device); -EXPORT_SYMBOL(spitzscoop2_device); - /* * Spitz Keyboard Device */ -- cgit v1.2.3 From 0eefe7189f04ecb391937b582ce4457df7b1ac62 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Sun, 4 Jul 2010 21:40:46 +0800 Subject: [ARM] pxa/corgi: remove unused declarations of corgiscoop_device Signed-off-by: Eric Miao --- arch/arm/mach-pxa/corgi.c | 2 -- arch/arm/mach-pxa/include/mach/corgi.h | 5 ----- 2 files changed, 7 deletions(-) (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 51ffa6afb675..34ddc3a8246d 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -185,8 +185,6 @@ static struct scoop_pcmcia_config corgi_pcmcia_config = { .num_devs = 1, }; -EXPORT_SYMBOL(corgiscoop_device); - static struct w100_mem_info corgi_fb_mem = { .ext_cntl = 0x00040003, .sdram_mode_reg = 0x00650021, diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 585970ef08ce..0011055bc3f9 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -109,10 +109,5 @@ #define CORGI_GPIO_BACKLIGHT_CONT (CORGI_SCOOP_GPIO_BASE + 7) #define CORGI_GPIO_MIC_BIAS (CORGI_SCOOP_GPIO_BASE + 8) -/* - * Shared data structures - */ -extern struct platform_device corgiscoop_device; - #endif /* __ASM_ARCH_CORGI_H */ -- cgit v1.2.3 From 04e4ad23541ffef18f1baded24a2675f204c156f Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 5 Jul 2010 00:03:34 +0800 Subject: [ARM] pxa: removed mostly unused and confusing two sharpsl.h Only a small part of used code is moved into sharpsl_pm.h. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/corgi.c | 3 +-- arch/arm/mach-pxa/corgi_pm.c | 3 +-- arch/arm/mach-pxa/include/mach/sharpsl.h | 35 ----------------------------- arch/arm/mach-pxa/include/mach/sharpsl_pm.h | 9 ++++++++ arch/arm/mach-pxa/poodle.c | 2 -- arch/arm/mach-pxa/sharpsl.h | 26 --------------------- arch/arm/mach-pxa/sharpsl_pm.c | 3 --- arch/arm/mach-pxa/spitz.c | 2 +- arch/arm/mach-pxa/spitz_pm.c | 3 +-- 9 files changed, 13 insertions(+), 73 deletions(-) delete mode 100644 arch/arm/mach-pxa/include/mach/sharpsl.h delete mode 100644 arch/arm/mach-pxa/sharpsl.h (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 34ddc3a8246d..1e2533739e8b 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -50,14 +50,13 @@ #include #include #include -#include +#include #include #include #include "generic.h" #include "devices.h" -#include "sharpsl.h" static unsigned long corgi_pin_config[] __initdata = { /* Static Memory I/O */ diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 41cf945173a0..29034778bfda 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -23,12 +23,11 @@ #include #include -#include #include #include +#include #include "generic.h" -#include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ #define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h deleted file mode 100644 index 8242e14a44fa..000000000000 --- a/arch/arm/mach-pxa/include/mach/sharpsl.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * SharpSL SSP Driver - */ - -unsigned long corgi_ssp_ads7846_putget(unsigned long); -unsigned long corgi_ssp_ads7846_get(void); -void corgi_ssp_ads7846_put(unsigned long data); -void corgi_ssp_ads7846_lock(void); -void corgi_ssp_ads7846_unlock(void); -void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data); -void corgi_ssp_blduty_set(int duty); -int corgi_ssp_max1111_get(unsigned long data); - -/* - * SharpSL Touchscreen Driver - */ - -struct corgits_machinfo { - unsigned long (*get_hsync_invperiod)(void); - void (*put_hsync)(void); - void (*wait_hsync)(void); -}; - - -/* - * SharpSL Backlight - */ -extern void corgibl_limit_intensity(int limit); -extern void corgi_lcd_limit_intensity(int limit); - - -/* - * SharpSL Battery/PM Driver - */ -extern void sharpsl_battery_kick(void); diff --git a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h index 1920dc6b05dc..905be6755f04 100644 --- a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h +++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h @@ -93,6 +93,8 @@ struct sharpsl_pm_status { extern struct sharpsl_pm_status sharpsl_pm; +extern struct battery_thresh sharpsl_battery_levels_acin[]; +extern struct battery_thresh sharpsl_battery_levels_noac[]; #define SHARPSL_LED_ERROR 2 #define SHARPSL_LED_ON 1 @@ -101,4 +103,11 @@ extern struct sharpsl_pm_status sharpsl_pm; void sharpsl_battery_kick(void); void sharpsl_pm_led(int val); +/* MAX1111 Channel Definitions */ +#define MAX1111_BATT_VOLT 4u +#define MAX1111_BATT_TEMP 2u +#define MAX1111_ACIN_VOLT 6u +int sharpsl_pm_pxa_read_max1111(int channel); + +void corgi_lcd_limit_intensity(int limit); #endif diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index f4abdaafdac4..41c8948ce154 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include @@ -53,7 +52,6 @@ #include "generic.h" #include "devices.h" -#include "sharpsl.h" static unsigned long poodle_pin_config[] __initdata = { /* I/O */ diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h deleted file mode 100644 index 0cc1203c5bef..000000000000 --- a/arch/arm/mach-pxa/sharpsl.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include - -/* - * SharpSL Battery/PM Driver - */ -#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) - -/* MAX1111 Channel Definitions */ -#define MAX1111_BATT_VOLT 4u -#define MAX1111_BATT_TEMP 2u -#define MAX1111_ACIN_VOLT 6u - -extern struct battery_thresh sharpsl_battery_levels_acin[]; -extern struct battery_thresh sharpsl_battery_levels_noac[]; -int sharpsl_pm_pxa_read_max1111(int channel); - - diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index d8c5301294c8..8fed027b12dc 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -29,11 +29,8 @@ #include #include #include -#include #include -#include "sharpsl.h" - /* * Constants */ diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index ddf7a11b330e..5153bf3b8985 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -44,10 +44,10 @@ #include #include #include +#include #include "generic.h" #include "devices.h" -#include "sharpsl.h" static unsigned long spitz_pin_config[] __initdata = { /* Chip Selects */ diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 53103d365fe7..7fe74067d85f 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -22,11 +22,10 @@ #include #include -#include #include #include +#include -#include "sharpsl.h" #include "generic.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ -- cgit v1.2.3 From 95045947ab18e412a81ad1fd002a4804eb269d01 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 13 Jul 2010 14:08:57 +0200 Subject: [ARM] pxa/palm: Introduce Palm27x This contains common code for Palm LD, TX, T5, Z72, Treo680, Centro This code also adds PMIC support for all the devices, Signed-off-by: Marek Vasut --- arch/arm/mach-pxa/Kconfig | 3 + arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/include/mach/palm27x.h | 81 ++++++ arch/arm/mach-pxa/palm27x.c | 477 +++++++++++++++++++++++++++++++ 4 files changed, 562 insertions(+) create mode 100644 arch/arm/mach-pxa/include/mach/palm27x.h create mode 100644 arch/arm/mach-pxa/palm27x.c (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 21d12246c5e1..6f04f21f998f 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -347,6 +347,9 @@ config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM +config MACH_PALM27X + bool + config MACH_PALMTE2 bool "Palm Tungsten|E2" default y diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index cb408efef618..85c7fb324dbb 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_PXA_EZX) += ezx.o obj-$(CONFIG_MACH_MP900C) += mp900.o obj-$(CONFIG_MACH_PALMTE2) += palmte2.o obj-$(CONFIG_MACH_PALMTC) += palmtc.o +obj-$(CONFIG_MACH_PALM27X) += palm27x.o obj-$(CONFIG_MACH_PALMT5) += palmt5.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o obj-$(CONFIG_MACH_PALMZ72) += palmz72.o diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h new file mode 100644 index 000000000000..0a5e5eadebf5 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palm27x.h @@ -0,0 +1,81 @@ +/* + * Common functions for Palm LD, T5, TX, Z72 + * + * Copyright (C) 2010 + * Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __INCLUDE_MACH_PALM27X__ +#define __INCLUDE_MACH_PALM27X__ + +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +extern void __init palm27x_mmc_init(int detect, int ro, int power, + int power_inverted); +#else +static inline void palm27x_mmc_init(int detect, int ro, int power, + int power_inverted) +{} +#endif + +#if defined(CONFIG_SUSPEND) +extern void __init palm27x_pm_init(unsigned long str_base); +#else +static inline void palm27x_pm_init(unsigned long str_base) {} +#endif + +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +extern struct pxafb_mode_info palm_320x480_lcd_mode; +extern struct pxafb_mode_info palm_320x320_lcd_mode; +extern struct pxafb_mode_info palm_320x320_new_lcd_mode; +extern void __init palm27x_lcd_init(int power, + struct pxafb_mode_info *mode); +#else +static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {} +#endif + +#if defined(CONFIG_USB_GADGET_PXA27X) || \ + defined(CONFIG_USB_GADGET_PXA27X_MODULE) +extern void __init palm27x_udc_init(int vbus, int pullup, + int vbus_inverted); +#else +static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {} +#endif + +#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE) +extern void __init palm27x_irda_init(int pwdn); +#else +static inline void palm27x_irda_init(int pwdn) {} +#endif + +#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \ + defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE) +extern void __init palm27x_ac97_init(int minv, int maxv, int jack, + int reset); +#else +static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {} +#endif + +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +extern void __init palm27x_pwm_init(int bl, int lcd); +#else +static inline void palm27x_pwm_init(int bl, int lcd) {} +#endif + +#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE) +extern void __init palm27x_power_init(int ac, int usb); +#else +static inline void palm27x_power_init(int ac, int usb) {} +#endif + +#if defined(CONFIG_REGULATOR_MAX1586) || \ + defined(CONFIG_REGULATOR_MAX1586_MODULE) +extern void __init palm27x_pmic_init(void); +#else +static inline void palm27x_pmic_init(void) {} +#endif + +#endif /* __INCLUDE_MACH_PALM27X__ */ diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c new file mode 100644 index 000000000000..77ad6d34ab5b --- /dev/null +++ b/arch/arm/mach-pxa/palm27x.c @@ -0,0 +1,477 @@ +/* + * Common code for Palm LD, T5, TX, Z72 + * + * Copyright (C) 2010 + * Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data palm27x_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .detect_delay_ms = 200, +}; + +void __init palm27x_mmc_init(int detect, int ro, int power, + int power_inverted) +{ + palm27x_mci_platform_data.gpio_card_detect = detect; + palm27x_mci_platform_data.gpio_card_ro = ro; + palm27x_mci_platform_data.gpio_power = power; + palm27x_mci_platform_data.gpio_power_invert = power_inverted; + + pxa_set_mci_info(&palm27x_mci_platform_data); +} +#endif + +/****************************************************************************** + * Power management - standby + ******************************************************************************/ +#if defined(CONFIG_SUSPEND) +void __init palm27x_pm_init(unsigned long str_base) +{ + static const unsigned long resume[] = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ + }; + + /* + * Copy the bootloader. + * NOTE: PalmZ72 uses a different wakeup method! + */ + memcpy(phys_to_virt(str_base), resume, sizeof(resume)); +} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +struct pxafb_mode_info palm_320x480_lcd_mode = { + .pixclock = 57692, + .xres = 320, + .yres = 480, + .bpp = 16, + + .left_margin = 32, + .right_margin = 1, + .upper_margin = 7, + .lower_margin = 1, + + .hsync_len = 4, + .vsync_len = 1, +}; + +struct pxafb_mode_info palm_320x320_lcd_mode = { + .pixclock = 115384, + .xres = 320, + .yres = 320, + .bpp = 16, + + .left_margin = 27, + .right_margin = 7, + .upper_margin = 7, + .lower_margin = 8, + + .hsync_len = 6, + .vsync_len = 1, +}; + +struct pxafb_mode_info palm_320x320_new_lcd_mode = { + .pixclock = 86538, + .xres = 320, + .yres = 320, + .bpp = 16, + + .left_margin = 20, + .right_margin = 8, + .upper_margin = 8, + .lower_margin = 5, + + .hsync_len = 4, + .vsync_len = 1, +}; + +static struct pxafb_mach_info palm27x_lcd_screen = { + .num_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +static int palm27x_lcd_power; +static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info) +{ + gpio_set_value(palm27x_lcd_power, on); +} + +void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode) +{ + palm27x_lcd_screen.modes = mode; + + if (gpio_is_valid(power)) { + if (!gpio_request(power, "LCD power")) { + pr_err("Palm27x: failed to claim lcd power gpio!\n"); + return; + } + if (!gpio_direction_output(power, 1)) { + pr_err("Palm27x: lcd power configuration failed!\n"); + return; + } + palm27x_lcd_power = power; + palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl; + } + + set_pxa_fb_info(&palm27x_lcd_screen); +} +#endif + +/****************************************************************************** + * USB Gadget + ******************************************************************************/ +#if defined(CONFIG_USB_GADGET_PXA27X) || \ + defined(CONFIG_USB_GADGET_PXA27X_MODULE) +static struct gpio_vbus_mach_info palm27x_udc_info = { + .gpio_vbus_inverted = 1, +}; + +static struct platform_device palm27x_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &palm27x_udc_info, + }, +}; + +void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted) +{ + palm27x_udc_info.gpio_vbus = vbus; + palm27x_udc_info.gpio_pullup = pullup; + + palm27x_udc_info.gpio_vbus_inverted = vbus_inverted; + + if (!gpio_request(pullup, "USB Pullup")) { + gpio_direction_output(pullup, + palm27x_udc_info.gpio_vbus_inverted); + gpio_free(pullup); + } else + return; + + platform_device_register(&palm27x_gpio_vbus); +} +#endif + +/****************************************************************************** + * IrDA + ******************************************************************************/ +#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE) +static struct pxaficp_platform_data palm27x_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_OFF, +}; + +void __init palm27x_irda_init(int pwdn) +{ + palm27x_ficp_platform_data.gpio_pwdown = pwdn; + pxa_set_ficp_info(&palm27x_ficp_platform_data); +} +#endif + +/****************************************************************************** + * WM97xx audio, battery + ******************************************************************************/ +#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \ + defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE) +static struct wm97xx_batt_pdata palm27x_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +static struct wm97xx_pdata palm27x_wm97xx_pdata = { + .batt_pdata = &palm27x_batt_pdata, +}; + +static pxa2xx_audio_ops_t palm27x_ac97_pdata = { + .codec_pdata = { &palm27x_wm97xx_pdata, }, +}; + +static struct palm27x_asoc_info palm27x_asoc_pdata = { + .jack_gpio = -1, +}; + +static struct platform_device palm27x_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palm27x_asoc_pdata, + }, +}; + +void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset) +{ + palm27x_ac97_pdata.reset_gpio = reset; + palm27x_asoc_pdata.jack_gpio = jack; + + if (minv < 0 || maxv < 0) { + palm27x_ac97_pdata.codec_pdata[0] = NULL; + pxa_set_ac97_info(&palm27x_ac97_pdata); + } else { + palm27x_batt_pdata.min_voltage = minv, + palm27x_batt_pdata.max_voltage = maxv, + + pxa_set_ac97_info(&palm27x_ac97_pdata); + platform_device_register(&palm27x_asoc); + } +} +#endif + +/****************************************************************************** + * Backlight + ******************************************************************************/ +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static int palm_bl_power; +static int palm_lcd_power; + +static int palm27x_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(palm_bl_power, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(palm_bl_power, 0); + if (ret) + goto err2; + + if (gpio_is_valid(palm_lcd_power)) { + ret = gpio_request(palm_lcd_power, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(palm_lcd_power, 0); + if (ret) + goto err3; + } + + return 0; +err3: + gpio_free(palm_lcd_power); +err2: + gpio_free(palm_bl_power); +err: + return ret; +} + +static int palm27x_backlight_notify(struct device *dev, int brightness) +{ + gpio_set_value(palm_bl_power, brightness); + if (gpio_is_valid(palm_lcd_power)) + gpio_set_value(palm_lcd_power, brightness); + return brightness; +} + +static void palm27x_backlight_exit(struct device *dev) +{ + gpio_free(palm_bl_power); + if (gpio_is_valid(palm_lcd_power)) + gpio_free(palm_lcd_power); +} + +static struct platform_pwm_backlight_data palm27x_backlight_data = { + .pwm_id = 0, + .max_brightness = 0xfe, + .dft_brightness = 0x7e, + .pwm_period_ns = 3500, + .init = palm27x_backlight_init, + .notify = palm27x_backlight_notify, + .exit = palm27x_backlight_exit, +}; + +static struct platform_device palm27x_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &palm27x_backlight_data, + }, +}; + +void __init palm27x_pwm_init(int bl, int lcd) +{ + palm_bl_power = bl; + palm_lcd_power = lcd; + platform_device_register(&palm27x_backlight); +} +#endif + +/****************************************************************************** + * Power supply + ******************************************************************************/ +#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE) +static int palm_ac_state; +static int palm_usb_state; + +static int palm27x_power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(palm_ac_state, "AC state"); + if (ret) + goto err1; + ret = gpio_direction_input(palm_ac_state); + if (ret) + goto err2; + + if (gpio_is_valid(palm_usb_state)) { + ret = gpio_request(palm_usb_state, "USB state"); + if (ret) + goto err2; + ret = gpio_direction_input(palm_usb_state); + if (ret) + goto err3; + } + + return 0; +err3: + gpio_free(palm_usb_state); +err2: + gpio_free(palm_ac_state); +err1: + return ret; +} + +static void palm27x_power_supply_exit(struct device *dev) +{ + gpio_free(palm_usb_state); + gpio_free(palm_ac_state); +} + +static int palm27x_is_ac_online(void) +{ + return gpio_get_value(palm_ac_state); +} + +static int palm27x_is_usb_online(void) +{ + return !gpio_get_value(palm_usb_state); +} +static char *palm27x_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata palm27x_ps_info = { + .init = palm27x_power_supply_init, + .exit = palm27x_power_supply_exit, + .is_ac_online = palm27x_is_ac_online, + .is_usb_online = palm27x_is_usb_online, + .supplied_to = palm27x_supplicants, + .num_supplicants = ARRAY_SIZE(palm27x_supplicants), +}; + +static struct platform_device palm27x_power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &palm27x_ps_info, + }, +}; + +void __init palm27x_power_init(int ac, int usb) +{ + palm_ac_state = ac; + palm_usb_state = usb; + platform_device_register(&palm27x_power_supply); +} +#endif + +/****************************************************************************** + * Core power regulator + ******************************************************************************/ +#if defined(CONFIG_REGULATOR_MAX1586) || \ + defined(CONFIG_REGULATOR_MAX1586_MODULE) +static struct regulator_consumer_supply palm27x_max1587a_consumers[] = { + { + .supply = "vcc_core", + } +}; + +static struct regulator_init_data palm27x_max1587a_v3_info = { + .constraints = { + .name = "vcc_core range", + .min_uV = 900000, + .max_uV = 1705000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .consumer_supplies = palm27x_max1587a_consumers, + .num_consumer_supplies = ARRAY_SIZE(palm27x_max1587a_consumers), +}; + +static struct max1586_subdev_data palm27x_max1587a_subdevs[] = { + { + .name = "vcc_core", + .id = MAX1586_V3, + .platform_data = &palm27x_max1587a_v3_info, + } +}; + +static struct max1586_platform_data palm27x_max1587a_info = { + .subdevs = palm27x_max1587a_subdevs, + .num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs), + .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */ +}; + +static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = { + { + I2C_BOARD_INFO("max1586", 0x14), + .platform_data = &palm27x_max1587a_info, + }, +}; + +void __init palm27x_pmic_init(void) +{ + i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info)); + pxa27x_set_i2c_power_info(NULL); +} +#endif -- cgit v1.2.3 From 2d679827e5b45e737fe86ab399b0891dd0cf00cb Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 14 Jun 2010 16:12:03 +0200 Subject: [ARM] pxa/spitz: Rework spitz This huge patch mostly shuffles code. The spitz.c file contained terrible mess and needed a cleanup, here it is: 1) Made every part modular, components are not built in if not selected. 2) Removed loads of preprocessor goo, mostly "#ifdef MACH_AKITA .... #endif" and similar code. The kernel size will grow by a few kb now, but the file is much more readable. 3) Reworked SD/CF power setting function and made it reentrant. 4) Add ISL6271A regulator support 5) Correctly register WM8750 Signed-off-by: Marek Vasut --- arch/arm/mach-pxa/include/mach/spitz.h | 6 + arch/arm/mach-pxa/spitz.c | 474 +++++++++++++++++++++------------ 2 files changed, 311 insertions(+), 169 deletions(-) (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index dc1ff254229e..685749a51c42 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -181,3 +181,9 @@ #define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) #define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) #define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT) + +/* + * Shared data structures + */ +extern struct platform_device spitzssp_device; +extern struct sharpsl_charger_machinfo spitz_pm_machinfo; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 5153bf3b8985..24c4d271b219 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -18,14 +18,15 @@ #include #include #include -#include #include #include #include #include #include +#include #include #include +#include #include #include @@ -33,11 +34,9 @@ #include #include - #include #include #include -#include #include #include #include @@ -46,9 +45,14 @@ #include #include +#include + #include "generic.h" #include "devices.h" +/****************************************************************************** + * Pin configuration + ******************************************************************************/ static unsigned long spitz_pin_config[] __initdata = { /* Chip Selects */ GPIO78_nCS_2, /* SCOOP #2 */ @@ -124,6 +128,11 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO1_GPIO | WAKEUP_ON_EDGE_FALL, /* SPITZ_GPIO_RESET */ }; + +/****************************************************************************** + * Scoop GPIO expander + ******************************************************************************/ +#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE) /* * Spitz SCOOP Device #1 */ @@ -182,43 +191,60 @@ struct platform_device spitzscoop2_device = { .resource = spitz_scoop2_resources, }; -#define SPITZ_PWR_SD 0x01 -#define SPITZ_PWR_CF 0x02 +static void __init spitz_scoop_init(void) +{ + platform_device_register(&spitz_scoop1_device); + + /* Akita doesn't have the second SCOOP chip */ + if (!machine_is_akita()) + platform_device_register(&spitzscoop2_device); +} /* Power control is shared with between one of the CF slots and SD */ -static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) +static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) { - unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); + unsigned short cpr; + unsigned long flags; - if (new_cpr & 0x0007) { + if (new_cpr & 0x7) { gpio_set_value(SPITZ_GPIO_CF_POWER, 1); - if (!(cpr & 0x0002) && !(cpr & 0x0004)) - mdelay(5); - if (device == SPITZ_PWR_CF) - cpr |= 0x0002; - if (device == SPITZ_PWR_SD) - cpr |= 0x0004; - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); - } else { - if (device == SPITZ_PWR_CF) - cpr &= ~0x0002; - if (device == SPITZ_PWR_SD) - cpr &= ~0x0004; - if (!(cpr & 0x0002) && !(cpr & 0x0004)) { - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000); - mdelay(1); - gpio_set_value(SPITZ_GPIO_CF_POWER, 0); - } else { - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); - } + mdelay(5); + } + + local_irq_save(flags); + + cpr = read_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR); + + if (enable & new_cpr) + cpr |= new_cpr; + else + cpr &= ~enable; + + write_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR, cpr); + + local_irq_restore(flags); + + if (!(cpr & 0x7)) { + mdelay(1); + gpio_set_value(SPITZ_GPIO_CF_POWER, 0); } } -static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr) +#else +static inline void spitz_scoop_init(void) {} +static inline void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) {} +#endif + +/****************************************************************************** + * PCMCIA + ******************************************************************************/ +#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE) +static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr) { /* Only need to override behaviour for slot 0 */ if (nr == 0) - spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr); + spitz_card_pwr_ctrl( + cpr & (SCOOP_CPR_CF_3V | SCOOP_CPR_CF_XV), cpr); else write_scoop_reg(scoop, SCOOP_CPR, cpr); } @@ -242,9 +268,23 @@ static struct scoop_pcmcia_config spitz_pcmcia_config = { .power_ctrl = spitz_pcmcia_pwr, }; -/* - * Spitz Keyboard Device - */ +static void __init spitz_pcmcia_init(void) +{ + /* Akita has only one PCMCIA slot used */ + if (machine_is_akita()) + spitz_pcmcia_config.num_devs = 1; + + platform_scoop_config = &spitz_pcmcia_config; +} +#else +static inline void spitz_pcmcia_init(void) {} +#endif + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) + #define SPITZ_KEY_CALENDAR KEY_F1 #define SPITZ_KEY_ADDRESS KEY_F2 #define SPITZ_KEY_FN KEY_F3 @@ -356,7 +396,18 @@ static struct platform_device spitzkbd_device = { }, }; +static void __init spitz_mkp_init(void) +{ + platform_device_register(&spitzkbd_device); +} +#else +static inline void spitz_mkp_init(void) {} +#endif +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) static struct gpio_keys_button spitz_gpio_keys[] = { { .type = EV_PWR, @@ -393,10 +444,18 @@ static struct platform_device spitz_gpio_keys_device = { }, }; +static void __init spitz_keys_init(void) +{ + platform_device_register(&spitz_gpio_keys_device); +} +#else +static inline void spitz_keys_init(void) {} +#endif -/* - * Spitz LEDs - */ +/****************************************************************************** + * LEDs + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led spitz_gpio_leds[] = { { .name = "spitz:amber:charge", @@ -423,11 +482,18 @@ static struct platform_device spitzled_device = { }, }; -#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static struct pxa2xx_spi_master spitz_spi_info = { - .num_chipselect = 3, -}; +static void __init spitz_leds_init(void) +{ + platform_device_register(&spitzled_device); +} +#else +static inline void spitz_leds_init(void) {} +#endif +/****************************************************************************** + * SSP Devices + ******************************************************************************/ +#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) static void spitz_wait_for_hsync(void) { while (gpio_get_value(SPITZ_GPIO_HSYNC)) @@ -505,11 +571,17 @@ static struct spi_board_info spitz_spi_devices[] = { }, }; +static struct pxa2xx_spi_master spitz_spi_info = { + .num_chipselect = 3, +}; + static void __init spitz_init_spi(void) { + struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info; + if (machine_is_akita()) { - spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT; - spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON; + lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT; + lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON; } pxa2xx_set_spi_info(2, &spitz_spi_info); @@ -519,20 +591,22 @@ static void __init spitz_init_spi(void) static inline void spitz_init_spi(void) {} #endif +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) /* - * MMC/SD Device - * - * The card detect interrupt isn't debounced so we delay it by 250ms - * to give the card a chance to fully insert/eject. + * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to + * give the card a chance to fully insert/eject. */ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - if (( 1 << vdd) & p_d->ocr_mask) - spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004); + if ((1 << vdd) & p_d->ocr_mask) + spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V); else - spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000); + spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0); } static struct pxamci_platform_data spitz_mci_platform_data = { @@ -544,10 +618,18 @@ static struct pxamci_platform_data spitz_mci_platform_data = { .gpio_power = -1, }; +static void __init spitz_mmc_init(void) +{ + pxa_set_mci_info(&spitz_mci_platform_data); +} +#else +static inline void spitz_mmc_init(void) {} +#endif -/* - * USB Host (OHCI) - */ +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static int spitz_ohci_init(struct device *dev) { int err; @@ -556,9 +638,7 @@ static int spitz_ohci_init(struct device *dev) if (err) return err; - /* Only Port 2 is connected - * Setup USB Port 2 Output Control Register - */ + /* Only Port 2 is connected, setup USB Port 2 Output Control Register */ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1); @@ -577,21 +657,39 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = { .power_budget = 150, }; +static void __init spitz_uhc_init(void) +{ + pxa_set_ohci_info(&spitz_ohci_platform_data); +} +#else +static inline void spitz_uhc_init(void) {} +#endif -/* - * Irda - */ - +/****************************************************************************** + * IrDA + ******************************************************************************/ +#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE) static struct pxaficp_platform_data spitz_ficp_platform_data = { -/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */ .transceiver_cap = IR_SIRMODE | IR_OFF, }; +static void __init spitz_irda_init(void) +{ + if (machine_is_akita()) + spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON; + else + spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON; -/* - * Spitz PXA Framebuffer - */ + pxa_set_ficp_info(&spitz_ficp_platform_data); +} +#else +static inline void spitz_irda_init(void) {} +#endif +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static struct pxafb_mode_info spitz_pxafb_modes[] = { { .pixclock = 19231, @@ -621,12 +719,24 @@ static struct pxafb_mode_info spitz_pxafb_modes[] = { }; static struct pxafb_mach_info spitz_pxafb_info = { - .modes = &spitz_pxafb_modes[0], - .num_modes = 2, + .modes = spitz_pxafb_modes, + .num_modes = ARRAY_SIZE(spitz_pxafb_modes), .fixed_modes = 1, .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING, }; +static void __init spitz_lcd_init(void) +{ + set_pxa_fb_info(&spitz_pxafb_info); +} +#else +static inline void spitz_lcd_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE) static struct mtd_partition sharpsl_nand_partitions[] = { { .name = "System Area", @@ -653,6 +763,16 @@ static struct nand_bbt_descr sharpsl_bbt = { .pattern = scan_ff_pattern }; +static struct nand_ecclayout spitz_akita_oobinfo = { + .oobfree = { {0x08, 0x09} }, + .eccbytes = 24, + .eccpos = { + 0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11, + 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, + 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37, + }, +}; + static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = { .badblock_pattern = &sharpsl_bbt, .partitions = sharpsl_nand_partitions, @@ -661,8 +781,8 @@ static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = { static struct resource sharpsl_nand_resources[] = { { - .start = 0x0C000000, - .end = 0x0C000FFF, + .start = PXA_CS3_PHYS, + .end = PXA_CS3_PHYS + SZ_4K - 1, .flags = IORESOURCE_MEM, }, }; @@ -672,10 +792,35 @@ static struct platform_device sharpsl_nand_device = { .id = -1, .resource = sharpsl_nand_resources, .num_resources = ARRAY_SIZE(sharpsl_nand_resources), - .dev.platform_data = &sharpsl_nand_platform_data, + .dev = { + .platform_data = &sharpsl_nand_platform_data, + } }; +static void __init spitz_nand_init(void) +{ + if (machine_is_spitz()) { + sharpsl_nand_partitions[1].size = 5 * 1024 * 1024; + } else if (machine_is_akita()) { + sharpsl_nand_partitions[1].size = 58 * 1024 * 1024; + sharpsl_nand_bbt.len = 1; + sharpsl_nand_pdata.ecc_layout = &spitz_akita_oobinfo; + } else if (machine_is_borzoi()) { + sharpsl_nand_partitions[1].size = 32 * 1024 * 1024; + sharpsl_nand_bbt.len = 1; + sharpsl_nand_pdata.ecc_layout = &spitz_akita_oobinfo; + } + + platform_device_register(&sharpsl_nand_device); +} +#else +static inline void spitz_nand_init(void) {} +#endif +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition sharpsl_rom_parts[] = { { .name ="Boot PROM Filesystem", @@ -692,8 +837,8 @@ static struct physmap_flash_data sharpsl_rom_data = { static struct resource sharpsl_rom_resources[] = { { - .start = 0x00000000, - .end = 0x007fffff, + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_8M - 1, .flags = IORESOURCE_MEM, }, }; @@ -703,18 +848,86 @@ static struct platform_device sharpsl_rom_device = { .id = -1, .resource = sharpsl_rom_resources, .num_resources = ARRAY_SIZE(sharpsl_rom_resources), - .dev.platform_data = &sharpsl_rom_data, + .dev = { + .platform_data = &sharpsl_rom_data, + }, +}; + +static void __init spitz_nor_init(void) +{ + platform_device_register(&sharpsl_rom_device); +} +#else +static inline void spitz_nor_init(void) {} +#endif + +/****************************************************************************** + * GPIO expander + ******************************************************************************/ +#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) +static struct pca953x_platform_data akita_pca953x_pdata = { + .gpio_base = AKITA_IOEXP_GPIO_BASE, +}; + +static struct i2c_board_info spitz_i2c_devs[] = { + { + .type = "wm8750", + .addr = 0x1b, + }, { + .type = "max7310", + .addr = 0x18, + .platform_data = &akita_pca953x_pdata, + }, +}; + +static struct regulator_consumer_supply isl6271a_consumers[] = { + { + .supply = "vcc_core", + } }; -static struct platform_device *devices[] __initdata = { - &spitzscoop_device, - &spitzkbd_device, - &spitz_gpio_keys_device, - &spitzled_device, - &sharpsl_nand_device, - &sharpsl_rom_device, +static struct regulator_init_data isl6271a_info[] = { + { + .constraints = { + .name = "vcc_core range", + .min_uV = 850000, + .max_uV = 1600000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .consumer_supplies = isl6271a_consumers, + .num_consumer_supplies = ARRAY_SIZE(isl6271a_consumers), + } }; +static struct i2c_board_info spitz_pi2c_devs[] = { + { + .type = "isl6271a", + .addr = 0x0c, + .platform_data = &isl6271a_info, + }, +}; + +static void __init spitz_i2c_init(void) +{ + int size = ARRAY_SIZE(spitz_i2c_devs); + + /* Only Akita has the max7310 chip */ + if (!machine_is_akita()) + size--; + + pxa_set_i2c_info(NULL); + pxa27x_set_i2c_power_info(NULL); + i2c_register_board_info(0, spitz_i2c_devs, size); + i2c_register_board_info(1, ARRAY_AND_SIZE(spitz_pi2c_devs)); +} +#else +static inline void spitz_i2c_init(void) {} +#endif + +/****************************************************************************** + * Machine init + ******************************************************************************/ static void spitz_poweroff(void) { arm_machine_restart('g', NULL); @@ -723,26 +936,18 @@ static void spitz_poweroff(void) static void spitz_restart(char mode, const char *cmd) { /* Bootloader magic for a reboot */ - if((MSC0 & 0xffff0000) == 0x7ff00000) + if ((MSC0 & 0xffff0000) == 0x7ff00000) MSC0 = (MSC0 & 0xffff) | 0x7ee00000; spitz_poweroff(); } -static void __init common_init(void) +static void __init spitz_init(void) { init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0); pm_power_off = spitz_poweroff; arm_pm_restart = spitz_restart; - if (machine_is_spitz()) { - sharpsl_nand_partitions[1].size = 5 * 1024 * 1024; - } else if (machine_is_akita()) { - sharpsl_nand_partitions[1].size = 58 * 1024 * 1024; - } else if (machine_is_borzoi()) { - sharpsl_nand_partitions[1].size = 32 * 1024 * 1024; - } - PMCR = 0x00; /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ @@ -755,88 +960,19 @@ static void __init common_init(void) pxa_set_stuart_info(NULL); spitz_init_spi(); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - pxa_set_mci_info(&spitz_mci_platform_data); - pxa_set_ohci_info(&spitz_ohci_platform_data); - pxa_set_ficp_info(&spitz_ficp_platform_data); - set_pxa_fb_info(&spitz_pxafb_info); - pxa_set_i2c_info(NULL); -} - -#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI) -static struct nand_bbt_descr sharpsl_akita_bbt = { - .options = 0, - .offs = 4, - .len = 1, - .pattern = scan_ff_pattern -}; - -static struct nand_ecclayout akita_oobinfo = { - .eccbytes = 24, - .eccpos = { - 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, - 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, - 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, - .oobfree = {{0x08, 0x09}} -}; -#endif - -#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) -static void __init spitz_init(void) -{ - spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON; - -#ifdef CONFIG_MACH_BORZOI - if (machine_is_borzoi()) { - sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; - sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; - } -#endif - - platform_scoop_config = &spitz_pcmcia_config; - - common_init(); - - platform_device_register(&spitzscoop2_device); -} -#endif - -#ifdef CONFIG_MACH_AKITA -/* - * Akita IO Expander - */ -static struct pca953x_platform_data akita_ioexp = { - .gpio_base = AKITA_IOEXP_GPIO_BASE, -}; - -static struct i2c_board_info akita_i2c_board_info[] = { - { - .type = "max7310", - .addr = 0x18, - .platform_data = &akita_ioexp, - }, { - .type = "wm8750", - .addr = 0x1b, - }, -}; - -static void __init akita_init(void) -{ - spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON; - - sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; - sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; - - /* We just pretend the second element of the array doesn't exist */ - spitz_pcmcia_config.num_devs = 1; - platform_scoop_config = &spitz_pcmcia_config; - - i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info)); - - common_init(); + spitz_scoop_init(); + spitz_mkp_init(); + spitz_keys_init(); + spitz_leds_init(); + spitz_mmc_init(); + spitz_pcmcia_init(); + spitz_irda_init(); + spitz_uhc_init(); + spitz_lcd_init(); + spitz_nor_init(); + spitz_nand_init(); + spitz_i2c_init(); } -#endif static void __init fixup_spitz(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) @@ -879,7 +1015,7 @@ MACHINE_START(AKITA, "SHARP Akita") .fixup = fixup_spitz, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, - .init_machine = akita_init, + .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END #endif -- cgit v1.2.3 From a9c0629cdefd9c26746ece510fcc88357869685e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 27 Jul 2010 21:48:10 +0200 Subject: [ARM] pxa/balloon3: PCMCIA Support This driver adds support for the on-board CF socket. Signed-off-by: Marek Vasut --- arch/arm/mach-pxa/balloon3.c | 13 ++- arch/arm/mach-pxa/include/mach/balloon3.h | 36 +++---- drivers/pcmcia/Kconfig | 2 +- drivers/pcmcia/Makefile | 1 + drivers/pcmcia/pxa2xx_balloon3.c | 158 ++++++++++++++++++++++++++++++ 5 files changed, 191 insertions(+), 19 deletions(-) create mode 100644 drivers/pcmcia/pxa2xx_balloon3.c (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 572525c26cac..91ad56d6e929 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -88,6 +88,18 @@ static unsigned long balloon3_pin_config[] __initdata = { /* USB Host */ GPIO88_USBH1_PWR, GPIO89_USBH1_PEN, + + /* PC Card */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, }; /****************************************************************************** @@ -405,7 +417,6 @@ static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) & balloon3_irq_enabled; - do { /* clear useless edge notification */ if (desc->chip->ack) diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 1a741065045f..d5dcf750c1ef 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -26,10 +26,12 @@ enum balloon3_features { #define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */ #define BALLOON3_FPGA_LENGTH 0x01000000 -/* FPGA/CPLD registers */ -#define BALLOON3_PCMCIA0_REG (BALLOON3_FPGA_VIRT + 0x00e00008) -/* fixme - same for now */ -#define BALLOON3_PCMCIA1_REG (BALLOON3_FPGA_VIRT + 0x00e00008) +/* FPGA / CPLD registers for CF socket */ +#define BALLOON3_CF_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00e00008) +#define BALLOON3_CF_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00008) +/* FPGA / CPLD version register */ +#define BALLOON3_FPGA_VER (BALLOON3_FPGA_VIRT + 0x00e0001c) + #define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000) /* fpga/cpld interrupt control register */ #define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C) @@ -41,6 +43,19 @@ enum balloon3_features { #define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004) #define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c) +/* CF Status Register bits (read-only) bits */ +#define BALLOON3_CF_nIRQ (1 << 0) +#define BALLOON3_CF_nSTSCHG_BVD1 (1 << 1) + +/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */ +#define BALLOON3_CF_RESET (1 << 0) +#define BALLOON3_CF_ENABLE (1 << 1) +#define BALLOON3_CF_ADD_ENABLE (1 << 2) + +/* CF Interrupt sources */ +#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0) +#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1) + /* GPIOs for irqs */ #define BALLOON3_GPIO_AUX_NIRQ (94) #define BALLOON3_GPIO_CODEC_IRQ (95) @@ -58,16 +73,6 @@ enum balloon3_features { #define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */ #define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */ -/* CF Status Register */ -#define BALLOON3_PCMCIA_nIRQ (1 << 0) /* IRQ / ready signal */ -#define BALLOON3_PCMCIA_nSTSCHG_BVD1 (1 << 1) - /* VDD sense / card status changed */ - -/* CF control register (write) */ -#define BALLOON3_PCMCIA_RESET (1 << 0) /* Card reset signal */ -#define BALLOON3_PCMCIA_ENABLE (1 << 1) -#define BALLOON3_PCMCIA_ADD_ENABLE (1 << 2) - /* CPLD (and FPGA) interface definitions */ #define CPLD_LCD0_DATA_SET 0x00 #define CPLD_LCD0_DATA_CLR 0x10 @@ -132,9 +137,6 @@ enum balloon3_features { /* Balloon3 Interrupts */ #define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x)) -#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0) -#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1) - #define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ) #define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ) #define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD) diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index d0f5ad306078..ef2f659ca161 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -215,7 +215,7 @@ config PCMCIA_PXA2XX depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \ || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \ - || MACH_VPAC270) + || MACH_VPAC270 || MACH_BALLOON3) select PCMCIA_SOC_COMMON help Say Y here to include support for the PXA2xx PCMCIA controller diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index d006e8beab9c..6a6077325527 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -70,6 +70,7 @@ pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o +pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y) diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c new file mode 100644 index 000000000000..dbbdd0063202 --- /dev/null +++ b/drivers/pcmcia/pxa2xx_balloon3.c @@ -0,0 +1,158 @@ +/* + * linux/drivers/pcmcia/pxa2xx_balloon3.c + * + * Balloon3 PCMCIA specific routines. + * + * Author: Nick Bane + * Created: June, 2006 + * Copyright: Toby Churchill Ltd + * Derived from pxa2xx_mainstone.c, by Nico Pitre + * + * Various modification by Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "soc_common.h" + +/* + * These are a list of interrupt sources that provokes a polled + * check of status + */ +static struct pcmcia_irqs irqs[] = { + { 0, BALLOON3_S0_CD_IRQ, "PCMCIA0 CD" }, + { 0, BALLOON3_BP_NSTSCHG_IRQ, "PCMCIA0 STSCHG" }, +}; + +static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + uint16_t ver; + int ret; + static void __iomem *fpga_ver; + + ver = __raw_readw(BALLOON3_FPGA_VER); + if (ver > 0x0201) + pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. " + "PCMCIA/CF support might be broken in this version!", + ver); + + skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ; + return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); +} + +static void balloon3_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); +} + +static unsigned long balloon3_pcmcia_status[2] = { + BALLOON3_CF_nSTSCHG_BVD1, + BALLOON3_CF_nSTSCHG_BVD1 +}; + +static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + uint16_t status; + int flip; + + /* This actually reads the STATUS register */ + status = __raw_readw(BALLOON3_CF_STATUS_REG); + flip = (status ^ balloon3_pcmcia_status[skt->nr]) + & BALLOON3_CF_nSTSCHG_BVD1; + /* + * Workaround for STSCHG which can't be deasserted: + * We therefore disable/enable corresponding IRQs + * as needed to avoid IRQ locks. + */ + if (flip) { + balloon3_pcmcia_status[skt->nr] = status; + if (status & BALLOON3_CF_nSTSCHG_BVD1) + enable_irq(BALLOON3_BP_NSTSCHG_IRQ); + else + disable_irq(BALLOON3_BP_NSTSCHG_IRQ); + } + + state->detect = !gpio_get_value(BALLOON3_GPIO_S0_CD); + state->ready = !!(status & BALLOON3_CF_nIRQ); + state->bvd1 = !!(status & BALLOON3_CF_nSTSCHG_BVD1); + state->bvd2 = 0; /* not available */ + state->vs_3v = 1; /* Always true its a CF card */ + state->vs_Xv = 0; /* not available */ + state->wrprot = 0; /* not available */ +} + +static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + __raw_writew((state->flags & SS_RESET) ? BALLOON3_CF_RESET : 0, + BALLOON3_CF_CONTROL_REG); + return 0; +} + +static void balloon3_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ +} + +static void balloon3_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ +} + +static struct pcmcia_low_level balloon3_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = balloon3_pcmcia_hw_init, + .hw_shutdown = balloon3_pcmcia_hw_shutdown, + .socket_state = balloon3_pcmcia_socket_state, + .configure_socket = balloon3_pcmcia_configure_socket, + .socket_init = balloon3_pcmcia_socket_init, + .socket_suspend = balloon3_pcmcia_socket_suspend, + .first = 0, + .nr = 1, +}; + +static struct platform_device *balloon3_pcmcia_device; + +static int __init balloon3_pcmcia_init(void) +{ + int ret; + + balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!balloon3_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(balloon3_pcmcia_device, + &balloon3_pcmcia_ops, sizeof(balloon3_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(balloon3_pcmcia_device); + + if (ret) + platform_device_put(balloon3_pcmcia_device); + + return ret; +} + +static void __exit balloon3_pcmcia_exit(void) +{ + platform_device_unregister(balloon3_pcmcia_device); +} + +module_init(balloon3_pcmcia_init); +module_exit(balloon3_pcmcia_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Nick Bane "); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_DESCRIPTION("Balloon3 board CF/PCMCIA driver"); -- cgit v1.2.3 From 02a453e4a5a7ca8c8801140f412d327686112e4e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 27 Jul 2010 23:11:03 +0200 Subject: [ARM] pxa/balloon3: PCF857x GPIO expander and LEDs Add supported for PCF8574A GPIO expander and LEDs attached to it. Signed-off-by: Marek Vasut --- arch/arm/mach-pxa/balloon3.c | 84 +++++++++++++++++++++++++++++-- arch/arm/mach-pxa/include/mach/balloon3.h | 11 ++++ 2 files changed, 92 insertions(+), 3 deletions(-) (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 91ad56d6e929..6f594bd410dd 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -375,15 +376,65 @@ static struct gpio_led_platform_data balloon3_gpio_led_info = { static struct platform_device balloon3_leds = { .name = "leds-gpio", - .id = -1, + .id = 0, .dev = { .platform_data = &balloon3_gpio_led_info, } }; +struct gpio_led balloon3_pcf_gpio_leds[] = { + { + .name = "balloon3:green:led0", + .gpio = BALLOON3_PCF_GPIO_LED0, + .active_low = 1, + }, { + .name = "balloon3:green:led1", + .gpio = BALLOON3_PCF_GPIO_LED1, + .active_low = 1, + }, { + .name = "balloon3:orange:led2", + .gpio = BALLOON3_PCF_GPIO_LED2, + .active_low = 1, + }, { + .name = "balloon3:orange:led3", + .gpio = BALLOON3_PCF_GPIO_LED3, + .active_low = 1, + }, { + .name = "balloon3:orange:led4", + .gpio = BALLOON3_PCF_GPIO_LED4, + .active_low = 1, + }, { + .name = "balloon3:orange:led5", + .gpio = BALLOON3_PCF_GPIO_LED5, + .active_low = 1, + }, { + .name = "balloon3:red:led6", + .gpio = BALLOON3_PCF_GPIO_LED6, + .active_low = 1, + }, { + .name = "balloon3:red:led7", + .gpio = BALLOON3_PCF_GPIO_LED7, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = { + .leds = balloon3_pcf_gpio_leds, + .num_leds = ARRAY_SIZE(balloon3_pcf_gpio_leds), +}; + +static struct platform_device balloon3_pcf_leds = { + .name = "leds-gpio", + .id = 1, + .dev = { + .platform_data = &balloon3_pcf_gpio_led_info, + } +}; + static void __init balloon3_leds_init(void) { platform_device_register(&balloon3_leds); + platform_device_register(&balloon3_pcf_leds); } #else static inline void balloon3_leds_init(void) {} @@ -450,6 +501,34 @@ static void __init balloon3_init_irq(void) "enabled\n", __func__, BALLOON3_AUX_NIRQ); } +/****************************************************************************** + * GPIO expander + ******************************************************************************/ +#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE) +static struct pcf857x_platform_data balloon3_pcf857x_pdata = { + .gpio_base = BALLOON3_PCF_GPIO_BASE, + .n_latch = 0, + .setup = NULL, + .teardown = NULL, + .context = NULL, +}; + +static struct i2c_board_info __initdata balloon3_i2c_devs[] = { + { + I2C_BOARD_INFO("pcf8574a", 0x38), + .platform_data = &balloon3_pcf857x_pdata, + }, +}; + +static void __init balloon3_i2c_init(void) +{ + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs)); +} +#else +static inline void balloon3_i2c_init(void) {} +#endif + /****************************************************************************** * Machine init ******************************************************************************/ @@ -463,8 +542,7 @@ static void __init balloon3_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - pxa_set_i2c_info(NULL); - + balloon3_i2c_init(); balloon3_irda_init(); balloon3_lcd_init(); balloon3_leds_init(); diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index d5dcf750c1ef..238f887ebaea 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -69,6 +69,17 @@ enum balloon3_features { #define BALLOON3_GPIO_S0_CD (105) +/* PCF8574A Leds */ +#define BALLOON3_PCF_GPIO_BASE 160 +#define BALLOON3_PCF_GPIO_LED0 (BALLOON3_PCF_GPIO_BASE + 0) +#define BALLOON3_PCF_GPIO_LED1 (BALLOON3_PCF_GPIO_BASE + 1) +#define BALLOON3_PCF_GPIO_LED2 (BALLOON3_PCF_GPIO_BASE + 2) +#define BALLOON3_PCF_GPIO_LED3 (BALLOON3_PCF_GPIO_BASE + 3) +#define BALLOON3_PCF_GPIO_LED4 (BALLOON3_PCF_GPIO_BASE + 4) +#define BALLOON3_PCF_GPIO_LED5 (BALLOON3_PCF_GPIO_BASE + 5) +#define BALLOON3_PCF_GPIO_LED6 (BALLOON3_PCF_GPIO_BASE + 6) +#define BALLOON3_PCF_GPIO_LED7 (BALLOON3_PCF_GPIO_BASE + 7) + /* FPGA Interrupt Mask/Acknowledge Register */ #define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */ #define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */ -- cgit v1.2.3 From e6a8ef54774fb01f0cf7c6d3679c76a0b60fab3b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 28 Jul 2010 03:32:05 +0200 Subject: [ARM] pxa/balloon3: Add NAND driver The NAND support is implemented through the gen_nand driver. Signed-off-by: Marek Vasut --- arch/arm/mach-pxa/balloon3.c | 151 ++++++++++++++++++++++++++++++ arch/arm/mach-pxa/include/mach/balloon3.h | 28 +++++- 2 files changed, 176 insertions(+), 3 deletions(-) (limited to 'arch/arm/mach-pxa/include') diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 6f594bd410dd..e2eb0b79634e 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include #include #include @@ -529,6 +531,154 @@ static void __init balloon3_i2c_init(void) static inline void balloon3_i2c_init(void) {} #endif +/****************************************************************************** + * NAND + ******************************************************************************/ +#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +static uint16_t balloon3_ctl = + BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | + BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 | + BALLOON3_NAND_CONTROL_FLWP; + +static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) + balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE; + else + balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE; + + if (ctrl & NAND_ALE) + balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE; + else + balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE; + + __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG); + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip) +{ + if (chip < 0 || chip > 3) + return; + + balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 | + BALLOON3_NAND_CONTROL_FLCE1 | + BALLOON3_NAND_CONTROL_FLCE2 | + BALLOON3_NAND_CONTROL_FLCE3; + + /* Deassert correct nCE line */ + balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip); + + __raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG); +} + +static int balloon3_nand_probe(struct platform_device *pdev) +{ + void __iomem *temp_map; + uint16_t ver; + int ret; + + __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG); + + ver = __raw_readw(BALLOON3_FPGA_VER); + if (ver > 0x0201) + pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. " + "NAND support might be broken in this version!", ver); + + /* Power up the NAND chips */ + ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND"); + if (ret) + goto err1; + + ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1); + if (ret) + goto err2; + + gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1); + + /* Deassert all nCE lines and write protect line */ + __raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG); + return 0; + +err2: + gpio_free(BALLOON3_GPIO_RUN_NAND); +err1: + return ret; +} + +static void balloon3_nand_remove(struct platform_device *pdev) +{ + /* Power down the NAND chips */ + gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0); + gpio_free(BALLOON3_GPIO_RUN_NAND); +} + +static struct mtd_partition balloon3_partition_info[] = { + [0] = { + .name = "Boot", + .offset = 0, + .size = SZ_4M, + }, + [1] = { + .name = "RootFS", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +static const char *balloon3_part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data balloon3_nand_pdata = { + .chip = { + .nr_chips = 4, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(balloon3_partition_info), + .partitions = balloon3_partition_info, + .chip_delay = 50, + .part_probe_types = balloon3_part_probes, + }, + .ctrl = { + .hwcontrol = 0, + .dev_ready = 0, + .select_chip = balloon3_nand_select_chip, + .cmd_ctrl = balloon3_nand_cmd_ctl, + .probe = balloon3_nand_probe, + .remove = balloon3_nand_remove, + }, +}; + +static struct resource balloon3_nand_resource[] = { + [0] = { + .start = BALLOON3_NAND_BASE, + .end = BALLOON3_NAND_BASE + 0x4, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device balloon3_nand = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(balloon3_nand_resource), + .resource = balloon3_nand_resource, + .id = -1, + .dev = { + .platform_data = &balloon3_nand_pdata, + } +}; + +static void __init balloon3_nand_init(void) +{ + platform_device_register(&balloon3_nand); +} +#else +static inline void balloon3_nand_init(void) {} +#endif + /****************************************************************************** * Machine init ******************************************************************************/ @@ -547,6 +697,7 @@ static void __init balloon3_init(void) balloon3_lcd_init(); balloon3_leds_init(); balloon3_mmc_init(); + balloon3_nand_init(); balloon3_nor_init(); balloon3_ts_init(); balloon3_udc_init(); diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index 238f887ebaea..eec92e6fd7cf 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -31,12 +31,15 @@ enum balloon3_features { #define BALLOON3_CF_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00008) /* FPGA / CPLD version register */ #define BALLOON3_FPGA_VER (BALLOON3_FPGA_VIRT + 0x00e0001c) +/* FPGA / CPLD registers for NAND flash */ +#define BALLOON3_NAND_BASE (PXA_CS4_PHYS + 0x00e00000) +#define BALLOON3_NAND_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000) +#define BALLOON3_NAND_CONTROL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010) +#define BALLOON3_NAND_STAT_REG (BALLOON3_FPGA_VIRT + 0x00e00010) +#define BALLOON3_NAND_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00014) -#define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000) /* fpga/cpld interrupt control register */ #define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C) -#define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010) -#define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014) #define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c) #define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000) @@ -56,6 +59,22 @@ enum balloon3_features { #define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0) #define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1) +/* NAND Control register */ +#define BALLOON3_NAND_CONTROL_FLWP (1 << 7) +#define BALLOON3_NAND_CONTROL_FLSE (1 << 6) +#define BALLOON3_NAND_CONTROL_FLCE3 (1 << 5) +#define BALLOON3_NAND_CONTROL_FLCE2 (1 << 4) +#define BALLOON3_NAND_CONTROL_FLCE1 (1 << 3) +#define BALLOON3_NAND_CONTROL_FLCE0 (1 << 2) +#define BALLOON3_NAND_CONTROL_FLALE (1 << 1) +#define BALLOON3_NAND_CONTROL_FLCLE (1 << 0) + +/* NAND Status register */ +#define BALLOON3_NAND_STAT_RNB (1 << 0) + +/* NAND Control2 register */ +#define BALLOON3_NAND_CONTROL2_16BIT (1 << 0) + /* GPIOs for irqs */ #define BALLOON3_GPIO_AUX_NIRQ (94) #define BALLOON3_GPIO_CODEC_IRQ (95) @@ -69,6 +88,9 @@ enum balloon3_features { #define BALLOON3_GPIO_S0_CD (105) +/* NAND */ +#define BALLOON3_GPIO_RUN_NAND (102) + /* PCF8574A Leds */ #define BALLOON3_PCF_GPIO_BASE 160 #define BALLOON3_PCF_GPIO_LED0 (BALLOON3_PCF_GPIO_BASE + 0) -- cgit v1.2.3