From 0f497039276fa2ca2ca324236848bb15c8c775dc Mon Sep 17 00:00:00 2001 From: jean-philippe francois Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP: fix __init section mismatch for _enable_preprogram _enable_preprogram is marked as __init, but is called from _enable which is not. Without this patch, the board oopses after init. Tested on custom hardware and on beagle board xM. Otherwise we can get: Unable to handle kernel paging request at virtual address 000b0012 pgd = cf968000 *pgd=8fb06831, *pte=00000000, *ppte=00000000 PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.9.0 #2) PC is at _enable_preprogram+0x1c/0x24 LR is at omap_hwmod_enable+0x34/0x60 psr: 80000093 sp : cf95de08 ip : 00002de5 fp : bec33d4c r10: 00000000 r9 : 00000002 r8 : b6dd2c78 r7 : 00000004 r6 : 00000000 r5 : a0000013 r4 : cf95c000 r3 : 00000000 r2 : b6dd2c7c r1 : 00000000 r0 : 000b0012 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8f968019 DAC: 00000015 Process otpcmd (pid: 607, stack limit = 0xcf95c230) Stack: (0xcf95de08 to 0xcf95e000) de00: 00000001 cf91f840 00000000 c001d6fc 00000002 cf91f840 de20: cf8f7e10 c001de54 cf8f7e10 c001de78 c001de68 c01d5e80 00000000 cf8f7e10 de40: cf8f7e10 c01d5f28 cf8f7e10 c0530d30 00000000 c01d6f28 00000000 c0088664 de60: b6ea1000 cfb05284 cf95c000 00000001 cf95c000 60000013 00000001 cf95dee4 de80: cf870050 c01d7308 cf870010 cf870050 00000001 c0278b14 c0526f28 00000000 dea0: cf870050 ffff8e18 00000001 cf95dee4 00000000 c0274f7c cf870050 00000001 dec0: cf95dee4 cf1d8484 000000e0 c0276464 00000008 cf9c0000 00000007 c0276980 dee0: cf9c0000 00000064 00000008 cf1d8404 cf1d8400 c01cc05c 0000270a cf1d8504 df00: 00000023 cf1d8484 00000007 c01cc670 00000bdd 00000001 00000000 cf449e60 df20: cf1dde70 cf1d8400 bec33d18 cf1d8504 c0246f00 00000003 cf95c000 00000000 df40: bec33d4c c01cd078 00000003 cf1d8504 00000081 c01cbcb8 bec33d18 00000003 df60: bec33d18 c00a9034 00002000 c00a9c68 cf92fe00 00000003 c0246f00 cf92fe00 df80: 00000000 c00a9cb0 00000003 00000000 00008e70 00000000 b6f17000 00000036 dfa0: c000e484 c000e300 00008e70 00000000 00000003 c0246f00 bec33d18 bec33d18 dfc0: 00008e70 00000000 b6f17000 00000036 00000000 00000000 b6f6d000 bec33d4c dfe0: b6ea1bd0 bec33d0c 00008c9c b6ea1bdc 60000010 00000003 00000000 00000000 (_omap_device_enable_hwmods+0x20/0x34) (omap_device_enable+0x3c/0x50) (_od_runtime_resume+0x10/0x1c) (__rpm_callback+0x54/0x98) (rpm_callback+0x64/0x7c) (rpm_resume+0x434/0x554) (__pm_runtime_resume+0x48/0x74) (omap_i2c_xfer+0x28/0xe8) (__i2c_transfer+0x3c/0x78) (i2c_transfer+0x6c/0xc0) (i2c_master_send+0x38/0x48) (sha204p_send_command+0x60/0x9c) (sha204c_send_and_receive+0x5c/0x1e0) (sha204m_read+0x94/0xa0) (otp_do_read+0x50/0xa4) (vfs_ioctl+0x24/0x40) (do_vfs_ioctl+0x1b0/0x1c0) (sys_ioctl+0x38/0x54) (ret_fast_syscall+0x0/0x30) Code: e1a08002 ea000009 e598003c e592c05c (e7904003) Cc: stable@vger.kernel.org Signed-off-by: Jean-Philippe Fran=C3=A7ois Acked-by: Kevin Hilman [tony@atomide.com: updated description with oops] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95fe9921..e3289888adfa 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2065,7 +2065,7 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh) * do so is present in the hwmod data, then call it and pass along the * return value; otherwise, return 0. */ -static int __init _enable_preprogram(struct omap_hwmod *oh) +static int _enable_preprogram(struct omap_hwmod *oh) { if (!oh->class->enable_preprogram) return 0; -- cgit v1.2.3 From a6d25f4c951b8b28f2eaec6f891ff834622532f2 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Wed, 27 Mar 2013 15:34:26 +0530 Subject: ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock It is required to enable respective clock-domain before enabling any clock/module inside that clock-domain. During common-clock migration, .clkdm_name field got missed for "clkdiv32k_ick" clock, which leaves "clk_24mhz_clkdm" unused; so it will be disabled even if childs of this clock-domain is enabled, which keeps child modules in idle mode. This fixes the kernel crash observed on AM335xEVM-SK platform, where clkdiv32_ick clock is being used as a gpio debounce clock and since clkdiv32k_ick is in idle mode it leads to below crash - Crash Log: ========== [ 2.598347] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa1ac150 [ 2.606434] Internal error: : 1028 [#1] SMP ARM [ 2.611207] Modules linked in: [ 2.614449] CPU: 0 Not tainted (3.8.4-01382-g1f449cd-dirty #4) [ 2.620973] PC is at _set_gpio_debounce+0x60/0x104 [ 2.626025] LR is at clk_enable+0x30/0x3c Cc: stable@vger.kernel.org # v3.9 Signed-off-by: Vaibhav Hiremath Cc: Rajendra Nayak Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/cclock33xx_data.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 6ebc7803bc3e..af3544ce4f02 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -454,9 +454,29 @@ DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0, */ DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732); -DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0, - AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); +static struct clk clkdiv32k_ick; + +static const char *clkdiv32k_ick_parent_names[] = { + "clkdiv32k_ck", +}; + +static const struct clk_ops clkdiv32k_ick_ops = { + .enable = &omap2_dflt_clk_enable, + .disable = &omap2_dflt_clk_disable, + .is_enabled = &omap2_dflt_clk_is_enabled, + .init = &omap2_init_clk_clkdm, +}; + +static struct clk_hw_omap clkdiv32k_ick_hw = { + .hw = { + .clk = &clkdiv32k_ick, + }, + .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL_SHIFT, + .clkdm_name = "clk_24mhz_clkdm", +}; + +DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops); /* "usbotg_fck" is an additional clock and not really a modulemode */ DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0, -- cgit v1.2.3 From 35513171eed4d7245e81d926d311e74f3dca06f3 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 15 May 2013 20:18:37 +0530 Subject: ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc() _enable_sysc() and _idle_sysc() handle the midle mode programming correctly and program HWMOD_IDLEMODE_SMART or HWMOD_IDLEMODE_SMART_WKUP respectively for supported IPs (The ones which support hardware controlled midle modes) However the same programming logic is missing when it comes to sidle mode programming. Here they seem to just set HWMOD_IDLEMODE_SMART (Again for the ones which support hardware controlled sidle modes) This problem was hidden due to the fact that a call to _enable_wakeup() in those same functions would overwrite the idlemodes and program them correctly (to HWMOD_IDLEMODE_SMART_WKUP in the supported cases) So fix the sidlemode handling correctly in these functions and handle the _enable_wakeup() for SIDLEMODE supported IPs same as the way its handled for MIDLEMODE supported ones. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 42 ++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 17 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95fe9921..c28552bfeb8d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,13 +1356,26 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { + if (oh->flags & HWMOD_SWSUP_SIDLE) { + idlemode = HWMOD_IDLEMODE_NO; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } + + /* + * This is special handling for some IPs like + * 32k sync timer. Force them to idle! + */ clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU); if (clkdm_act && !(oh->class->sysc->idlemodes & (SIDLE_SMART | SIDLE_SMART_WKUP))) idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + _set_slave_idlemode(oh, idlemode, &v); } @@ -1391,10 +1404,6 @@ static void _enable_sysc(struct omap_hwmod *oh) (sf & SYSC_HAS_CLOCKACTIVITY)) _set_clockactivity(oh, oh->class->sysc->clockact, &v); - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); /* @@ -1430,13 +1439,16 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ - if (oh->flags & HWMOD_SWSUP_SIDLE || - !(oh->class->sysc->idlemodes & - (SIDLE_SMART | SIDLE_SMART_WKUP))) + if (oh->flags & HWMOD_SWSUP_SIDLE) { idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = HWMOD_IDLEMODE_SMART; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } _set_slave_idlemode(oh, idlemode, &v); } @@ -1455,10 +1467,6 @@ static void _idle_sysc(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); } -- cgit v1.2.3 From ca43ea345de96dc214be790b6cebedbdfe110b63 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 15 May 2013 20:18:38 +0530 Subject: ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active Some IPs (like UART) need the sidle mode to be controlled in SW only while they are active. Once they go inactive, they need the IP to be put back in HW control so they are also wakeup capable. The flag HWMOD_SWSUP_SIDLE takes care of IPs which need the sidle mode to be *always* controlled in SWSUP. We now have a need to control IPs sidle mode in SWSUP only while its active. So define a new flag 'HWMOD_SWSUP_SIDLE_ACT' to help the framework know about these new IP requirements. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 3 ++- arch/arm/mach-omap2/omap_hwmod.h | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c28552bfeb8d..5739429894b0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,7 +1356,8 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_SIDLE) { + if (oh->flags & HWMOD_SWSUP_SIDLE || + oh->flags & HWMOD_SWSUP_SIDLE_ACT) { idlemode = HWMOD_IDLEMODE_NO; } else { if (sf & SYSC_HAS_ENAWAKEUP) diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index fe5962921f07..8498774b5fb1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -463,6 +463,9 @@ struct omap_hwmod_omap4_prcm { * is kept in force-standby mode. Failing to do so causes PM problems * with musb on OMAP3630 at least. Note that musb has a dedicated register * to control MSTANDBY signal when MIDLEMODE is set to force-standby. + * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module + * out of idle, but rely on smart-idle to the put it back in idle, + * so the wakeups are still functional (Only known case for now is UART) */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -476,6 +479,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) #define HWMOD_FORCE_MSTANDBY (1 << 11) +#define HWMOD_SWSUP_SIDLE_ACT (1 << 12) /* * omap_hwmod._int_flags definitions -- cgit v1.2.3 From 66dde54e978a310c57a40023ff39835fa5ccd7a3 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:39 +0530 Subject: ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes OMAP UART IP needs software control for slave idle modes based on functional state of the IP. i.e The IP slave idle settings should be set to 'noidle' when being used and then put back to 'smart_idle' when unused. Currently this is handled by the driver with function pointers implemented in platform code. This however breaks in case of device tree because of missing idle handling APIs. Previous patches in this series added a flag HWMOD_SWSUP_SIDLE_ACTIVE which takes care of the mentioned requirement. Hence add the flag for all UART IPs to take advantage of feature supported by framework. Subsequent patches removes the slave idle handling from driver code. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 3 +++ arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 6 ++++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 ++++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 +++++- 4 files changed, 18 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index c8c64b3e1acc..d05fc7b54567 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,6 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -531,6 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -550,6 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 01d8f324450a..075f7cc51026 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -1995,6 +1995,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart1_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_wkupdm_ck", @@ -2015,6 +2016,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = { .name = "uart2", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart2_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2042,6 +2044,7 @@ static struct omap_hwmod am33xx_uart3_hwmod = { .name = "uart3", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart3_irqs, .sdma_reqs = uart3_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2062,6 +2065,7 @@ static struct omap_hwmod am33xx_uart4_hwmod = { .name = "uart4", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart4_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2082,6 +2086,7 @@ static struct omap_hwmod am33xx_uart5_hwmod = { .name = "uart5", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart5_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2102,6 +2107,7 @@ static struct omap_hwmod am33xx_uart6_hwmod = { .name = "uart6", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart6_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4083606ea1da..31c7126eb3bb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,6 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -508,6 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -526,6 +528,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -555,6 +558,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index eaba9dc91a0d..848b6dc67590 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3434,6 +3434,7 @@ static struct omap_hwmod omap44xx_uart1_hwmod = { .name = "uart1", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart1_irqs, .sdma_reqs = omap44xx_uart1_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3462,6 +3463,7 @@ static struct omap_hwmod omap44xx_uart2_hwmod = { .name = "uart2", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart2_irqs, .sdma_reqs = omap44xx_uart2_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3490,7 +3492,8 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | + HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart3_irqs, .sdma_reqs = omap44xx_uart3_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3519,6 +3522,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart4_irqs, .sdma_reqs = omap44xx_uart4_sdma_reqs, .main_clk = "func_48m_fclk", -- cgit v1.2.3 From e59cd225c0ad280122cb69e04cd66699557875a4 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:40 +0530 Subject: ARM: OMAP2+: serial: Remove the un-used slave idle hooks UART IP idle handling now taken care by runtime pm backend(hwmod) indirectly and OMAP serial driver is also cleaned up accordingly. So remove the un-used slave idle platforms hooks now. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/serial.c | 31 ------------------------------- 1 file changed, 31 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 8396b5b7e912..f6601563aa69 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -95,38 +95,9 @@ static void omap_uart_enable_wakeup(struct device *dev, bool enable) omap_hwmod_disable_wakeup(od->hwmods[0]); } -/* - * Errata i291: [UART]:Cannot Acknowledge Idle Requests - * in Smartidle Mode When Configured for DMA Operations. - * WA: configure uart in force idle mode. - */ -static void omap_uart_set_noidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); -} - -static void omap_uart_set_smartidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - u8 idlemode; - - if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) - idlemode = HWMOD_IDLEMODE_SMART_WKUP; - else - idlemode = HWMOD_IDLEMODE_SMART; - - omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); -} - #else static void omap_uart_enable_wakeup(struct device *dev, bool enable) {} -static void omap_uart_set_noidle(struct device *dev) {} -static void omap_uart_set_smartidle(struct device *dev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -299,8 +270,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_smartidle; - omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; omap_up.dma_rx_timeout = info->dma_rx_timeout; -- cgit v1.2.3 From 3260c76055afc6c9396e5ad9f9e599505ea8891f Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:42 +0530 Subject: ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis With the OMAP serial driver sysc cleanup patches in this series, we can now remove the hwmod external apis for sysc fiddling. While at this, also remove unused sysc auto idle api from hwmod code. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 68 ---------------------------------------- arch/arm/mach-omap2/omap_hwmod.h | 3 -- 2 files changed, 71 deletions(-) (limited to 'arch/arm/mach-omap2') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5739429894b0..03931425029b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2254,42 +2254,6 @@ static int _idle(struct omap_hwmod *oh) return 0; } -/** - * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit - * @oh: struct omap_hwmod * - * @autoidle: desired AUTOIDLE bitfield value (0 or 1) - * - * Sets the IP block's OCP autoidle bit in hardware, and updates our - * local copy. Intended to be used by drivers that require - * direct manipulation of the AUTOIDLE bits. - * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes - * along the return value from _set_module_autoidle(). - * - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle) -{ - u32 v; - int retval = 0; - unsigned long flags; - - if (!oh || oh->_state != _HWMOD_STATE_ENABLED) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - - v = oh->_sysc_cache; - - retval = _set_module_autoidle(oh, autoidle, &v); - - if (!retval) - _write_sysconfig(v, oh); - - spin_unlock_irqrestore(&oh->_lock, flags); - - return retval; -} - /** * _shutdown - shutdown an omap_hwmod * @oh: struct omap_hwmod * @@ -3188,38 +3152,6 @@ error: return ret; } -/** - * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode - * @oh: struct omap_hwmod * - * @idlemode: SIDLEMODE field bits (shifted to bit 0) - * - * Sets the IP block's OCP slave idlemode in hardware, and updates our - * local copy. Intended to be used by drivers that have some erratum - * that requires direct manipulation of the SIDLEMODE bits. Returns - * -EINVAL if @oh is null, or passes along the return value from - * _set_slave_idlemode(). - * - * XXX Does this function have any current users? If not, we should - * remove it; it is better to let the rest of the hwmod code handle this. - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode) -{ - u32 v; - int retval = 0; - - if (!oh) - return -EINVAL; - - v = oh->_sysc_cache; - - retval = _set_slave_idlemode(oh, idlemode, &v); - if (!retval) - _write_sysconfig(v, oh); - - return retval; -} - /** * omap_hwmod_lookup - look up a registered omap_hwmod by name * @name: name of the omap_hwmod to look up diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 8498774b5fb1..0c898f58ac9b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -645,9 +645,6 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); int omap_hwmod_enable_clocks(struct omap_hwmod *oh); int omap_hwmod_disable_clocks(struct omap_hwmod *oh); -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle); - int omap_hwmod_reset(struct omap_hwmod *oh); void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); -- cgit v1.2.3