From acd18af93ad3b99e6769b917fe5b549dc1bfc468 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 28 Sep 2012 12:42:28 +0300
Subject: OMAPDSS: add omapdss_version

Add new enum, omapdss_version, that is used to tell which DSS hardware
version the SoC has. This enum is initialized during platform init, and
passed in the platform data to omapdss driver.

Note that the versions are not "continuous", that is, you cannot check
if the version is less or greater than something, but you need to check
for exact version match. In other words, this is invalid:

/* test if DSS is 3630 or earlier */
if (ver <= OMAPDSS_VER_OMAP3630)
	...

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 arch/arm/mach-omap2/display.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

(limited to 'arch/arm/mach-omap2/display.c')

diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 1011995f150a..28f508724a56 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -284,6 +284,35 @@ err:
 	return ERR_PTR(r);
 }
 
+static enum omapdss_version __init omap_display_get_version(void)
+{
+	if (cpu_is_omap24xx())
+		return OMAPDSS_VER_OMAP24xx;
+	else if (cpu_is_omap3630())
+		return OMAPDSS_VER_OMAP3630;
+	else if (cpu_is_omap34xx()) {
+		if (soc_is_am35xx()) {
+			return OMAPDSS_VER_AM35xx;
+		} else {
+			if (omap_rev() < OMAP3430_REV_ES3_0)
+				return OMAPDSS_VER_OMAP34xx_ES1;
+			else
+				return OMAPDSS_VER_OMAP34xx_ES3;
+		}
+	} else if (omap_rev() == OMAP4430_REV_ES1_0)
+		return OMAPDSS_VER_OMAP4430_ES1;
+	else if (omap_rev() == OMAP4430_REV_ES2_0 ||
+			omap_rev() == OMAP4430_REV_ES2_1 ||
+			omap_rev() == OMAP4430_REV_ES2_2)
+		return OMAPDSS_VER_OMAP4430_ES2;
+	else if (cpu_is_omap44xx())
+		return OMAPDSS_VER_OMAP4;
+	else if (soc_is_omap54xx())
+		return OMAPDSS_VER_OMAP5;
+	else
+		return OMAPDSS_VER_UNKNOWN;
+}
+
 int __init omap_display_init(struct omap_dss_board_info *board_data)
 {
 	int r = 0;
@@ -291,9 +320,18 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 	int i, oh_count;
 	const struct omap_dss_hwmod_data *curr_dss_hwmod;
 	struct platform_device *dss_pdev;
+	enum omapdss_version ver;
 
 	/* create omapdss device */
 
+	ver = omap_display_get_version();
+
+	if (ver == OMAPDSS_VER_UNKNOWN) {
+		pr_err("DSS not supported on this SoC\n");
+		return -ENODEV;
+	}
+
+	board_data->version = ver;
 	board_data->dsi_enable_pads = omap_dsi_enable_pads;
 	board_data->dsi_disable_pads = omap_dsi_disable_pads;
 	board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count;
-- 
cgit v1.2.3


From 25c7d49ed48b4843da7dea56a81ae7f620211ee0 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 2 Oct 2012 17:25:48 -0700
Subject: ARM: OMAP: Make omap_device local to mach-omap2

Let's make omap_device local to mach-omap2 for
ARM common zImage support.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/pm_bus.c                  |    1 -
 arch/arm/mach-omap2/Makefile                  |    3 +-
 arch/arm/mach-omap2/am35xx-emac.c             |    2 +-
 arch/arm/mach-omap2/board-omap3beagle.c       |    2 +-
 arch/arm/mach-omap2/devices.c                 |    2 +-
 arch/arm/mach-omap2/display.c                 |    2 +-
 arch/arm/mach-omap2/dma.c                     |    3 +-
 arch/arm/mach-omap2/drm.c                     |    2 +-
 arch/arm/mach-omap2/gpio.c                    |    2 +-
 arch/arm/mach-omap2/gpmc.c                    |    2 +-
 arch/arm/mach-omap2/hdq1w.c                   |    2 +-
 arch/arm/mach-omap2/hsmmc.c                   |    2 +-
 arch/arm/mach-omap2/hwspinlock.c              |    2 +-
 arch/arm/mach-omap2/i2c.c                     |    2 +-
 arch/arm/mach-omap2/mcbsp.c                   |    5 +-
 arch/arm/mach-omap2/msdi.c                    |    3 +-
 arch/arm/mach-omap2/omap_device.c             | 1278 +++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_device.h             |  176 ++++
 arch/arm/mach-omap2/opp.c                     |    2 +-
 arch/arm/mach-omap2/pm.c                      |    2 +-
 arch/arm/mach-omap2/pmu.c                     |    2 +-
 arch/arm/mach-omap2/serial.c                  |    2 +-
 arch/arm/mach-omap2/sr_device.c               |    2 +-
 arch/arm/mach-omap2/timer.c                   |    2 +-
 arch/arm/mach-omap2/usb-host.c                |    2 +-
 arch/arm/mach-omap2/usb-musb.c                |    2 +-
 arch/arm/plat-omap/Makefile                   |    1 -
 arch/arm/plat-omap/include/plat/omap_device.h |  176 ----
 arch/arm/plat-omap/omap-pm-noop.c             |    3 +-
 arch/arm/plat-omap/omap_device.c              | 1278 -------------------------
 30 files changed, 1483 insertions(+), 1482 deletions(-)
 create mode 100644 arch/arm/mach-omap2/omap_device.c
 create mode 100644 arch/arm/mach-omap2/omap_device.h
 delete mode 100644 arch/arm/plat-omap/include/plat/omap_device.h
 delete mode 100644 arch/arm/plat-omap/omap_device.c

(limited to 'arch/arm/mach-omap2/display.c')

diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 7868e75ad077..8a74ec5e3de2 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -19,7 +19,6 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-#include <plat/omap_device.h>
 #include <plat/omap-pm.h>
 
 #ifdef CONFIG_PM_RUNTIME
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fe40d9e488c9..46d9071f0938 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,7 +4,8 @@
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o
+	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
+	 omap_device.o
 
 # INTCPS IP block support - XXX should be moved to drivers/
 obj-$(CONFIG_ARCH_OMAP2)		+= irq.o
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
index d0c54c573d34..af11dcdb7e2c 100644
--- a/arch/arm/mach-omap2/am35xx-emac.c
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/davinci_emac.h>
 #include <asm/system.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include "am35xx.h"
 #include "control.h"
 #include "am35xx-emac.h"
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index f11a5eb595f7..2064917874a7 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -44,7 +44,7 @@
 #include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 
 #include "mux.h"
 #include "hsmmc.h"
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index e9ee9d99f881..48c0def2dbc2 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -26,7 +26,7 @@
 #include "iomap.h"
 #include <plat-omap/dma-omap.h>
 #include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include "omap4-keypad.h"
 
 #include "soc.h"
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 28f508724a56..55661d00423c 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -26,7 +26,7 @@
 
 #include <video/omapdss.h>
 #include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include <plat/omap-pm.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 4e3ac6b9449e..7ddc6c90ed71 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -29,9 +29,10 @@
 #include <linux/device.h>
 
 #include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
 #include <plat-omap/dma-omap.h>
 
+#include "omap_device.h"
+
 #define OMAP2_DMA_STRIDE	0x60
 
 static u32 errata;
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 72e0f01b715c..67991ea53ce7 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -24,7 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include <plat/omap_hwmod.h>
 
 #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index d1058f16fb40..2bd24671bcf6 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -24,7 +24,7 @@
 #include <linux/platform_data/gpio-omap.h>
 
 #include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include <plat/omap-pm.h>
 
 #include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 9472541a4d8d..7dff7ffcb7ee 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -31,10 +31,10 @@
 #include <asm/mach-types.h>
 
 #include <plat/cpu.h>
-#include <plat/omap_device.h>
 
 #include "soc.h"
 #include "common.h"
+#include "omap_device.h"
 #include "gpmc.h"
 
 #define	DEVICE_NAME		"omap-gpmc"
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index e003f2bba30c..a533ce33d112 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -28,7 +28,7 @@
 #include <linux/platform_device.h>
 
 #include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include "hdq1w.h"
 
 #include "common.h"
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index ec6c2230cb38..797e8c6a4130 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -18,7 +18,7 @@
 #include <linux/platform_data/gpio-omap.h>
 
 #include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 
 #include "mux.h"
 #include "mmc.h"
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 8763c8520dc2..58565214b428 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -22,7 +22,7 @@
 #include <linux/hwspinlock.h>
 
 #include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 
 static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
 	.base_id = 0,
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 9f12f63ec54d..84b0d9f25a7b 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -21,7 +21,7 @@
 
 #include "common.h"
 #include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 
 #include "mux.h"
 #include "i2c.h"
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index b2c7f2300759..a106c75c5338 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,10 +19,11 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/pm_runtime.h>
 
 #include <plat-omap/dma-omap.h>
-#include <plat/omap_device.h>
-#include <linux/pm_runtime.h>
+
+#include "omap_device.h"
 
 /*
  * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index a6020d750431..46bf98a99180 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -26,10 +26,9 @@
 #include <linux/platform_data/gpio-omap.h>
 
 #include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-
 #include "common.h"
 #include "control.h"
+#include "omap_device.h"
 #include "mux.h"
 #include "mmc.h"
 
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
new file mode 100644
index 000000000000..e5fbcb53c7cc
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -0,0 +1,1278 @@
+/*
+ * omap_device implementation
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ * Paul Walmsley, Kevin Hilman
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code provides a consistent interface for OMAP device drivers
+ * to control power management and interconnect properties of their
+ * devices.
+ *
+ * In the medium- to long-term, this code should either be
+ * a) implemented via arch-specific pointers in platform_data
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_data func pointers
+ *
+ *
+ * Guidelines for usage by driver authors:
+ *
+ * 1. These functions are intended to be used by device drivers via
+ * function pointers in struct platform_data.  As an example,
+ * omap_device_enable() should be passed to the driver as
+ *
+ * struct foo_driver_platform_data {
+ * ...
+ *      int (*device_enable)(struct platform_device *pdev);
+ * ...
+ * }
+ *
+ * Note that the generic "device_enable" name is used, rather than
+ * "omap_device_enable".  This is so other architectures can pass in their
+ * own enable/disable functions here.
+ *
+ * This should be populated during device setup:
+ *
+ * ...
+ * pdata->device_enable = omap_device_enable;
+ * ...
+ *
+ * 2. Drivers should first check to ensure the function pointer is not null
+ * before calling it, as in:
+ *
+ * if (pdata->device_enable)
+ *     pdata->device_enable(pdev);
+ *
+ * This allows other architectures that don't use similar device_enable()/
+ * device_shutdown() functions to execute normally.
+ *
+ * ...
+ *
+ * Suggested usage by device drivers:
+ *
+ * During device initialization:
+ * device_enable()
+ *
+ * During device idle:
+ * (save remaining device context if necessary)
+ * device_idle();
+ *
+ * During device resume:
+ * device_enable();
+ * (restore context if necessary)
+ *
+ * During device shutdown:
+ * device_shutdown()
+ * (device must be reinitialized at this point to use it again)
+ *
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/notifier.h>
+
+#include "omap_device.h"
+#include <plat/omap_hwmod.h>
+#include <plat/clock.h>
+
+/* These parameters are passed to _omap_device_{de,}activate() */
+#define USE_WAKEUP_LAT			0
+#define IGNORE_WAKEUP_LAT		1
+
+static int omap_early_device_register(struct platform_device *pdev);
+
+static struct omap_device_pm_latency omap_default_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func   = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	}
+};
+
+/* Private functions */
+
+/**
+ * _omap_device_activate - increase device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: increase to latency target (0) or full readiness (1)?
+ *
+ * Increase readiness of omap_device @od (thus decreasing device
+ * wakeup latency, but consuming more power).  If @ignore_lat is
+ * IGNORE_WAKEUP_LAT, make the omap_device fully active.  Otherwise,
+ * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
+ * latency is greater than the requested maximum wakeup latency, step
+ * backwards in the omap_device_pm_latency table to ensure the
+ * device's maximum wakeup latency is less than or equal to the
+ * requested maximum wakeup latency.  Returns 0.
+ */
+static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
+{
+	struct timespec a, b, c;
+
+	dev_dbg(&od->pdev->dev, "omap_device: activating\n");
+
+	while (od->pm_lat_level > 0) {
+		struct omap_device_pm_latency *odpl;
+		unsigned long long act_lat = 0;
+
+		od->pm_lat_level--;
+
+		odpl = od->pm_lats + od->pm_lat_level;
+
+		if (!ignore_lat &&
+		    (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
+			break;
+
+		read_persistent_clock(&a);
+
+		/* XXX check return code */
+		odpl->activate_func(od);
+
+		read_persistent_clock(&b);
+
+		c = timespec_sub(b, a);
+		act_lat = timespec_to_ns(&c);
+
+		dev_dbg(&od->pdev->dev,
+			"omap_device: pm_lat %d: activate: elapsed time %llu nsec\n",
+			od->pm_lat_level, act_lat);
+
+		if (act_lat > odpl->activate_lat) {
+			odpl->activate_lat_worst = act_lat;
+			if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
+				odpl->activate_lat = act_lat;
+				dev_dbg(&od->pdev->dev,
+					"new worst case activate latency %d: %llu\n",
+					od->pm_lat_level, act_lat);
+			} else
+				dev_warn(&od->pdev->dev,
+					 "activate latency %d higher than expected. (%llu > %d)\n",
+					 od->pm_lat_level, act_lat,
+					 odpl->activate_lat);
+		}
+
+		od->dev_wakeup_lat -= odpl->activate_lat;
+	}
+
+	return 0;
+}
+
+/**
+ * _omap_device_deactivate - decrease device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: decrease to latency target (0) or full inactivity (1)?
+ *
+ * Decrease readiness of omap_device @od (thus increasing device
+ * wakeup latency, but conserving power).  If @ignore_lat is
+ * IGNORE_WAKEUP_LAT, make the omap_device fully inactive.  Otherwise,
+ * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
+ * latency is less than the requested maximum wakeup latency, step
+ * forwards in the omap_device_pm_latency table to ensure the device's
+ * maximum wakeup latency is less than or equal to the requested
+ * maximum wakeup latency.  Returns 0.
+ */
+static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
+{
+	struct timespec a, b, c;
+
+	dev_dbg(&od->pdev->dev, "omap_device: deactivating\n");
+
+	while (od->pm_lat_level < od->pm_lats_cnt) {
+		struct omap_device_pm_latency *odpl;
+		unsigned long long deact_lat = 0;
+
+		odpl = od->pm_lats + od->pm_lat_level;
+
+		if (!ignore_lat &&
+		    ((od->dev_wakeup_lat + odpl->activate_lat) >
+		     od->_dev_wakeup_lat_limit))
+			break;
+
+		read_persistent_clock(&a);
+
+		/* XXX check return code */
+		odpl->deactivate_func(od);
+
+		read_persistent_clock(&b);
+
+		c = timespec_sub(b, a);
+		deact_lat = timespec_to_ns(&c);
+
+		dev_dbg(&od->pdev->dev,
+			"omap_device: pm_lat %d: deactivate: elapsed time %llu nsec\n",
+			od->pm_lat_level, deact_lat);
+
+		if (deact_lat > odpl->deactivate_lat) {
+			odpl->deactivate_lat_worst = deact_lat;
+			if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
+				odpl->deactivate_lat = deact_lat;
+				dev_dbg(&od->pdev->dev,
+					"new worst case deactivate latency %d: %llu\n",
+					od->pm_lat_level, deact_lat);
+			} else
+				dev_warn(&od->pdev->dev,
+					 "deactivate latency %d higher than expected. (%llu > %d)\n",
+					 od->pm_lat_level, deact_lat,
+					 odpl->deactivate_lat);
+		}
+
+		od->dev_wakeup_lat += odpl->activate_lat;
+
+		od->pm_lat_level++;
+	}
+
+	return 0;
+}
+
+static void _add_clkdev(struct omap_device *od, const char *clk_alias,
+		       const char *clk_name)
+{
+	struct clk *r;
+	struct clk_lookup *l;
+
+	if (!clk_alias || !clk_name)
+		return;
+
+	dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name);
+
+	r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
+	if (!IS_ERR(r)) {
+		dev_warn(&od->pdev->dev,
+			 "alias %s already exists\n", clk_alias);
+		clk_put(r);
+		return;
+	}
+
+	r = clk_get(NULL, clk_name);
+	if (IS_ERR(r)) {
+		dev_err(&od->pdev->dev,
+			"clk_get for %s failed\n", clk_name);
+		return;
+	}
+
+	l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev));
+	if (!l) {
+		dev_err(&od->pdev->dev,
+			"clkdev_alloc for %s failed\n", clk_alias);
+		return;
+	}
+
+	clkdev_add(l);
+}
+
+/**
+ * _add_hwmod_clocks_clkdev - Add clkdev entry for hwmod optional clocks
+ * and main clock
+ * @od: struct omap_device *od
+ * @oh: struct omap_hwmod *oh
+ *
+ * For the main clock and every optional clock present per hwmod per
+ * omap_device, this function adds an entry in the clkdev table of the
+ * form <dev-id=dev_name, con-id=role> if it does not exist already.
+ *
+ * The function is called from inside omap_device_build_ss(), after
+ * omap_device_register.
+ *
+ * This allows drivers to get a pointer to its optional clocks based on its role
+ * by calling clk_get(<dev*>, <role>).
+ * In the case of the main clock, a "fck" alias is used.
+ *
+ * No return value.
+ */
+static void _add_hwmod_clocks_clkdev(struct omap_device *od,
+				     struct omap_hwmod *oh)
+{
+	int i;
+
+	_add_clkdev(od, "fck", oh->main_clk);
+
+	for (i = 0; i < oh->opt_clks_cnt; i++)
+		_add_clkdev(od, oh->opt_clks[i].role, oh->opt_clks[i].clk);
+}
+
+
+/**
+ * omap_device_build_from_dt - build an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
+ *
+ * Function for building an omap_device already registered from device-tree
+ *
+ * Returns 0 or PTR_ERR() on error.
+ */
+static int omap_device_build_from_dt(struct platform_device *pdev)
+{
+	struct omap_hwmod **hwmods;
+	struct omap_device *od;
+	struct omap_hwmod *oh;
+	struct device_node *node = pdev->dev.of_node;
+	const char *oh_name;
+	int oh_cnt, i, ret = 0;
+
+	oh_cnt = of_property_count_strings(node, "ti,hwmods");
+	if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
+		dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n");
+		return -ENODEV;
+	}
+
+	hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+	if (!hwmods) {
+		ret = -ENOMEM;
+		goto odbfd_exit;
+	}
+
+	for (i = 0; i < oh_cnt; i++) {
+		of_property_read_string_index(node, "ti,hwmods", i, &oh_name);
+		oh = omap_hwmod_lookup(oh_name);
+		if (!oh) {
+			dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n",
+				oh_name);
+			ret = -EINVAL;
+			goto odbfd_exit1;
+		}
+		hwmods[i] = oh;
+	}
+
+	od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0);
+	if (!od) {
+		dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
+			oh_name);
+		ret = PTR_ERR(od);
+		goto odbfd_exit1;
+	}
+
+	/* Fix up missing resource names */
+	for (i = 0; i < pdev->num_resources; i++) {
+		struct resource *r = &pdev->resource[i];
+
+		if (r->name == NULL)
+			r->name = dev_name(&pdev->dev);
+	}
+
+	if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
+		omap_device_disable_idle_on_suspend(pdev);
+
+	pdev->dev.pm_domain = &omap_device_pm_domain;
+
+odbfd_exit1:
+	kfree(hwmods);
+odbfd_exit:
+	return ret;
+}
+
+static int _omap_device_notifier_call(struct notifier_block *nb,
+				      unsigned long event, void *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *od;
+
+	switch (event) {
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (pdev->archdata.od)
+			omap_device_delete(pdev->archdata.od);
+		break;
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (pdev->dev.of_node)
+			omap_device_build_from_dt(pdev);
+		/* fall through */
+	default:
+		od = to_omap_device(pdev);
+		if (od)
+			od->_driver_status = event;
+	}
+
+	return NOTIFY_DONE;
+}
+
+
+/* Public functions for use by core code */
+
+/**
+ * omap_device_get_context_loss_count - get lost context count
+ * @od: struct omap_device *
+ *
+ * Using the primary hwmod, query the context loss count for this
+ * device.
+ *
+ * Callers should consider context for this device lost any time this
+ * function returns a value different than the value the caller got
+ * the last time it called this function.
+ *
+ * If any hwmods exist for the omap_device assoiated with @pdev,
+ * return the context loss counter for that hwmod, otherwise return
+ * zero.
+ */
+int omap_device_get_context_loss_count(struct platform_device *pdev)
+{
+	struct omap_device *od;
+	u32 ret = 0;
+
+	od = to_omap_device(pdev);
+
+	if (od->hwmods_cnt)
+		ret = omap_hwmod_get_context_loss_count(od->hwmods[0]);
+
+	return ret;
+}
+
+/**
+ * omap_device_count_resources - count number of struct resource entries needed
+ * @od: struct omap_device *
+ *
+ * Count the number of struct resource entries needed for this
+ * omap_device @od.  Used by omap_device_build_ss() to determine how
+ * much memory to allocate before calling
+ * omap_device_fill_resources().  Returns the count.
+ */
+static int omap_device_count_resources(struct omap_device *od)
+{
+	int c = 0;
+	int i;
+
+	for (i = 0; i < od->hwmods_cnt; i++)
+		c += omap_hwmod_count_resources(od->hwmods[i]);
+
+	pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n",
+		 od->pdev->name, c, od->hwmods_cnt);
+
+	return c;
+}
+
+/**
+ * omap_device_fill_resources - fill in array of struct resource
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the resource data for this omap_device @od.  Used by
+ * omap_device_build_ss() after calling omap_device_count_resources().
+ * Ideally this function would not be needed at all.  If omap_device
+ * replaces platform_device, then we can specify our own
+ * get_resource()/ get_irq()/etc functions that use the underlying
+ * omap_hwmod information.  Or if platform_device is extended to use
+ * subarchitecture-specific function pointers, the various
+ * platform_device functions can simply call omap_device internal
+ * functions to get device resources.  Hacking around the existing
+ * platform_device code wastes memory.  Returns 0.
+ */
+static int omap_device_fill_resources(struct omap_device *od,
+				      struct resource *res)
+{
+	int i, r;
+
+	for (i = 0; i < od->hwmods_cnt; i++) {
+		r = omap_hwmod_fill_resources(od->hwmods[i], res);
+		res += r;
+	}
+
+	return 0;
+}
+
+/**
+ * _od_fill_dma_resources - fill in array of struct resource with dma resources
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the dma resource data for this omap_device @od.  Used by
+ * omap_device_alloc() after calling omap_device_count_resources().
+ *
+ * Ideally this function would not be needed at all.  If we have
+ * mechanism to get dma resources from DT.
+ *
+ * Returns 0.
+ */
+static int _od_fill_dma_resources(struct omap_device *od,
+				      struct resource *res)
+{
+	int i, r;
+
+	for (i = 0; i < od->hwmods_cnt; i++) {
+		r = omap_hwmod_fill_dma_resources(od->hwmods[i], res);
+		res += r;
+	}
+
+	return 0;
+}
+
+/**
+ * omap_device_alloc - allocate an omap_device
+ * @pdev: platform_device that will be included in this omap_device
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for allocating an omap_device structure and filling
+ * hwmods, resources and pm_latency attributes.
+ *
+ * Returns an struct omap_device pointer or ERR_PTR() on error;
+ */
+struct omap_device *omap_device_alloc(struct platform_device *pdev,
+					struct omap_hwmod **ohs, int oh_cnt,
+					struct omap_device_pm_latency *pm_lats,
+					int pm_lats_cnt)
+{
+	int ret = -ENOMEM;
+	struct omap_device *od;
+	struct resource *res = NULL;
+	int i, res_count;
+	struct omap_hwmod **hwmods;
+
+	od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+	if (!od) {
+		ret = -ENOMEM;
+		goto oda_exit1;
+	}
+	od->hwmods_cnt = oh_cnt;
+
+	hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+	if (!hwmods)
+		goto oda_exit2;
+
+	od->hwmods = hwmods;
+	od->pdev = pdev;
+
+	res_count = omap_device_count_resources(od);
+	/*
+	 * DT Boot:
+	 *   OF framework will construct the resource structure (currently
+	 *   does for MEM & IRQ resource) and we should respect/use these
+	 *   resources, killing hwmod dependency.
+	 *   If pdev->num_resources > 0, we assume that MEM & IRQ resources
+	 *   have been allocated by OF layer already (through DTB).
+	 *
+	 * Non-DT Boot:
+	 *   Here, pdev->num_resources = 0, and we should get all the
+	 *   resources from hwmod.
+	 *
+	 * TODO: Once DMA resource is available from OF layer, we should
+	 *   kill filling any resources from hwmod.
+	 */
+	if (res_count > pdev->num_resources) {
+		/* Allocate resources memory to account for new resources */
+		res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
+		if (!res)
+			goto oda_exit3;
+
+		/*
+		 * If pdev->num_resources > 0, then assume that,
+		 * MEM and IRQ resources will only come from DT and only
+		 * fill DMA resource from hwmod layer.
+		 */
+		if (pdev->num_resources && pdev->resource) {
+			dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n",
+				__func__, res_count);
+			memcpy(res, pdev->resource,
+			       sizeof(struct resource) * pdev->num_resources);
+			_od_fill_dma_resources(od, &res[pdev->num_resources]);
+		} else {
+			dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n",
+				__func__, res_count);
+			omap_device_fill_resources(od, res);
+		}
+
+		ret = platform_device_add_resources(pdev, res, res_count);
+		kfree(res);
+
+		if (ret)
+			goto oda_exit3;
+	}
+
+	if (!pm_lats) {
+		pm_lats = omap_default_latency;
+		pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
+	}
+
+	od->pm_lats_cnt = pm_lats_cnt;
+	od->pm_lats = kmemdup(pm_lats,
+			sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
+			GFP_KERNEL);
+	if (!od->pm_lats)
+		goto oda_exit3;
+
+	pdev->archdata.od = od;
+
+	for (i = 0; i < oh_cnt; i++) {
+		hwmods[i]->od = od;
+		_add_hwmod_clocks_clkdev(od, hwmods[i]);
+	}
+
+	return od;
+
+oda_exit3:
+	kfree(hwmods);
+oda_exit2:
+	kfree(od);
+oda_exit1:
+	dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret);
+
+	return ERR_PTR(ret);
+}
+
+void omap_device_delete(struct omap_device *od)
+{
+	if (!od)
+		return;
+
+	od->pdev->archdata.od = NULL;
+	kfree(od->pm_lats);
+	kfree(od->hwmods);
+	kfree(od);
+}
+
+/**
+ * omap_device_build - build and register an omap_device with one omap_hwmod
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
+ *
+ * Convenience function for building and registering a single
+ * omap_device record, which in turn builds and registers a
+ * platform_device record.  See omap_device_build_ss() for more
+ * information.  Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
+ * passes along the return value of omap_device_build_ss().
+ */
+struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id,
+				      struct omap_hwmod *oh, void *pdata,
+				      int pdata_len,
+				      struct omap_device_pm_latency *pm_lats,
+				      int pm_lats_cnt, int is_early_device)
+{
+	struct omap_hwmod *ohs[] = { oh };
+
+	if (!oh)
+		return ERR_PTR(-EINVAL);
+
+	return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
+				    pdata_len, pm_lats, pm_lats_cnt,
+				    is_early_device);
+}
+
+/**
+ * omap_device_build_ss - build and register an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
+ *
+ * Convenience function for building and registering an omap_device
+ * subsystem record.  Subsystem records consist of multiple
+ * omap_hwmods.  This function in turn builds and registers a
+ * platform_device record.  Returns an ERR_PTR() on error, or passes
+ * along the return value of omap_device_register().
+ */
+struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id,
+					 struct omap_hwmod **ohs, int oh_cnt,
+					 void *pdata, int pdata_len,
+					 struct omap_device_pm_latency *pm_lats,
+					 int pm_lats_cnt, int is_early_device)
+{
+	int ret = -ENOMEM;
+	struct platform_device *pdev;
+	struct omap_device *od;
+
+	if (!ohs || oh_cnt == 0 || !pdev_name)
+		return ERR_PTR(-EINVAL);
+
+	if (!pdata && pdata_len > 0)
+		return ERR_PTR(-EINVAL);
+
+	pdev = platform_device_alloc(pdev_name, pdev_id);
+	if (!pdev) {
+		ret = -ENOMEM;
+		goto odbs_exit;
+	}
+
+	/* Set the dev_name early to allow dev_xxx in omap_device_alloc */
+	if (pdev->id != -1)
+		dev_set_name(&pdev->dev, "%s.%d", pdev->name,  pdev->id);
+	else
+		dev_set_name(&pdev->dev, "%s", pdev->name);
+
+	od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt);
+	if (IS_ERR(od))
+		goto odbs_exit1;
+
+	ret = platform_device_add_data(pdev, pdata, pdata_len);
+	if (ret)
+		goto odbs_exit2;
+
+	if (is_early_device)
+		ret = omap_early_device_register(pdev);
+	else
+		ret = omap_device_register(pdev);
+	if (ret)
+		goto odbs_exit2;
+
+	return pdev;
+
+odbs_exit2:
+	omap_device_delete(od);
+odbs_exit1:
+	platform_device_put(pdev);
+odbs_exit:
+
+	pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
+
+	return ERR_PTR(ret);
+}
+
+/**
+ * omap_early_device_register - register an omap_device as an early platform
+ * device.
+ * @od: struct omap_device * to register
+ *
+ * Register the omap_device structure.  This currently just calls
+ * platform_early_add_device() on the underlying platform_device.
+ * Returns 0 by default.
+ */
+static int __init omap_early_device_register(struct platform_device *pdev)
+{
+	struct platform_device *devices[1];
+
+	devices[0] = pdev;
+	early_platform_add_devices(devices, 1);
+	return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int _od_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	int ret;
+
+	ret = pm_generic_runtime_suspend(dev);
+
+	if (!ret)
+		omap_device_idle(pdev);
+
+	return ret;
+}
+
+static int _od_runtime_idle(struct device *dev)
+{
+	return pm_generic_runtime_idle(dev);
+}
+
+static int _od_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	omap_device_enable(pdev);
+
+	return pm_generic_runtime_resume(dev);
+}
+#endif
+
+#ifdef CONFIG_SUSPEND
+static int _od_suspend_noirq(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *od = to_omap_device(pdev);
+	int ret;
+
+	/* Don't attempt late suspend on a driver that is not bound */
+	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER)
+		return 0;
+
+	ret = pm_generic_suspend_noirq(dev);
+
+	if (!ret && !pm_runtime_status_suspended(dev)) {
+		if (pm_generic_runtime_suspend(dev) == 0) {
+			if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
+				omap_device_idle(pdev);
+			od->flags |= OMAP_DEVICE_SUSPENDED;
+		}
+	}
+
+	return ret;
+}
+
+static int _od_resume_noirq(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *od = to_omap_device(pdev);
+
+	if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
+	    !pm_runtime_status_suspended(dev)) {
+		od->flags &= ~OMAP_DEVICE_SUSPENDED;
+		if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
+			omap_device_enable(pdev);
+		pm_generic_runtime_resume(dev);
+	}
+
+	return pm_generic_resume_noirq(dev);
+}
+#else
+#define _od_suspend_noirq NULL
+#define _od_resume_noirq NULL
+#endif
+
+struct dev_pm_domain omap_device_pm_domain = {
+	.ops = {
+		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
+				   _od_runtime_idle)
+		USE_PLATFORM_PM_SLEEP_OPS
+		.suspend_noirq = _od_suspend_noirq,
+		.resume_noirq = _od_resume_noirq,
+	}
+};
+
+/**
+ * omap_device_register - register an omap_device with one omap_hwmod
+ * @od: struct omap_device * to register
+ *
+ * Register the omap_device structure.  This currently just calls
+ * platform_device_register() on the underlying platform_device.
+ * Returns the return value of platform_device_register().
+ */
+int omap_device_register(struct platform_device *pdev)
+{
+	pr_debug("omap_device: %s: registering\n", pdev->name);
+
+	pdev->dev.pm_domain = &omap_device_pm_domain;
+	return platform_device_add(pdev);
+}
+
+
+/* Public functions for use by device drivers through struct platform_data */
+
+/**
+ * omap_device_enable - fully activate an omap_device
+ * @od: struct omap_device * to activate
+ *
+ * Do whatever is necessary for the hwmods underlying omap_device @od
+ * to be accessible and ready to operate.  This generally involves
+ * enabling clocks, setting SYSCONFIG registers; and in the future may
+ * involve remuxing pins.  Device drivers should call this function
+ * (through platform_data function pointers) where they would normally
+ * enable clocks, etc.  Returns -EINVAL if called when the omap_device
+ * is already enabled, or passes along the return value of
+ * _omap_device_activate().
+ */
+int omap_device_enable(struct platform_device *pdev)
+{
+	int ret;
+	struct omap_device *od;
+
+	od = to_omap_device(pdev);
+
+	if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+		dev_warn(&pdev->dev,
+			 "omap_device: %s() called from invalid state %d\n",
+			 __func__, od->_state);
+		return -EINVAL;
+	}
+
+	/* Enable everything if we're enabling this device from scratch */
+	if (od->_state == OMAP_DEVICE_STATE_UNKNOWN)
+		od->pm_lat_level = od->pm_lats_cnt;
+
+	ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
+
+	od->dev_wakeup_lat = 0;
+	od->_dev_wakeup_lat_limit = UINT_MAX;
+	od->_state = OMAP_DEVICE_STATE_ENABLED;
+
+	return ret;
+}
+
+/**
+ * omap_device_idle - idle an omap_device
+ * @od: struct omap_device * to idle
+ *
+ * Idle omap_device @od by calling as many .deactivate_func() entries
+ * in the omap_device's pm_lats table as is possible without exceeding
+ * the device's maximum wakeup latency limit, pm_lat_limit.  Device
+ * drivers should call this function (through platform_data function
+ * pointers) where they would normally disable clocks after operations
+ * complete, etc..  Returns -EINVAL if the omap_device is not
+ * currently enabled, or passes along the return value of
+ * _omap_device_deactivate().
+ */
+int omap_device_idle(struct platform_device *pdev)
+{
+	int ret;
+	struct omap_device *od;
+
+	od = to_omap_device(pdev);
+
+	if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
+		dev_warn(&pdev->dev,
+			 "omap_device: %s() called from invalid state %d\n",
+			 __func__, od->_state);
+		return -EINVAL;
+	}
+
+	ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
+
+	od->_state = OMAP_DEVICE_STATE_IDLE;
+
+	return ret;
+}
+
+/**
+ * omap_device_shutdown - shut down an omap_device
+ * @od: struct omap_device * to shut down
+ *
+ * Shut down omap_device @od by calling all .deactivate_func() entries
+ * in the omap_device's pm_lats table and then shutting down all of
+ * the underlying omap_hwmods.  Used when a device is being "removed"
+ * or a device driver is being unloaded.  Returns -EINVAL if the
+ * omap_device is not currently enabled or idle, or passes along the
+ * return value of _omap_device_deactivate().
+ */
+int omap_device_shutdown(struct platform_device *pdev)
+{
+	int ret, i;
+	struct omap_device *od;
+
+	od = to_omap_device(pdev);
+
+	if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
+	    od->_state != OMAP_DEVICE_STATE_IDLE) {
+		dev_warn(&pdev->dev,
+			 "omap_device: %s() called from invalid state %d\n",
+			 __func__, od->_state);
+		return -EINVAL;
+	}
+
+	ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);
+
+	for (i = 0; i < od->hwmods_cnt; i++)
+		omap_hwmod_shutdown(od->hwmods[i]);
+
+	od->_state = OMAP_DEVICE_STATE_SHUTDOWN;
+
+	return ret;
+}
+
+/**
+ * omap_device_assert_hardreset - set a device's hardreset line
+ * @pdev: struct platform_device * to reset
+ * @name: const char * name of the reset line
+ *
+ * Set the hardreset line identified by @name on the IP blocks
+ * associated with the hwmods backing the platform_device @pdev.  All
+ * of the hwmods associated with @pdev must have the same hardreset
+ * line linked to them for this to work.  Passes along the return value
+ * of omap_hwmod_assert_hardreset() in the event of any failure, or
+ * returns 0 upon success.
+ */
+int omap_device_assert_hardreset(struct platform_device *pdev, const char *name)
+{
+	struct omap_device *od = to_omap_device(pdev);
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < od->hwmods_cnt; i++) {
+		ret = omap_hwmod_assert_hardreset(od->hwmods[i], name);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+/**
+ * omap_device_deassert_hardreset - release a device's hardreset line
+ * @pdev: struct platform_device * to reset
+ * @name: const char * name of the reset line
+ *
+ * Release the hardreset line identified by @name on the IP blocks
+ * associated with the hwmods backing the platform_device @pdev.  All
+ * of the hwmods associated with @pdev must have the same hardreset
+ * line linked to them for this to work.  Passes along the return
+ * value of omap_hwmod_deassert_hardreset() in the event of any
+ * failure, or returns 0 upon success.
+ */
+int omap_device_deassert_hardreset(struct platform_device *pdev,
+				   const char *name)
+{
+	struct omap_device *od = to_omap_device(pdev);
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < od->hwmods_cnt; i++) {
+		ret = omap_hwmod_deassert_hardreset(od->hwmods[i], name);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+/**
+ * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
+ * @od: struct omap_device *
+ *
+ * When a device's maximum wakeup latency limit changes, call some of
+ * the .activate_func or .deactivate_func function pointers in the
+ * omap_device's pm_lats array to ensure that the device's maximum
+ * wakeup latency is less than or equal to the new latency limit.
+ * Intended to be called by OMAP PM code whenever a device's maximum
+ * wakeup latency limit changes (e.g., via
+ * omap_pm_set_dev_wakeup_lat()).  Returns 0 if nothing needs to be
+ * done (e.g., if the omap_device is not currently idle, or if the
+ * wakeup latency is already current with the new limit) or passes
+ * along the return value of _omap_device_deactivate() or
+ * _omap_device_activate().
+ */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+			     u32 new_wakeup_lat_limit)
+{
+	int ret = -EINVAL;
+	struct omap_device *od;
+
+	od = to_omap_device(pdev);
+
+	if (new_wakeup_lat_limit == od->dev_wakeup_lat)
+		return 0;
+
+	od->_dev_wakeup_lat_limit = new_wakeup_lat_limit;
+
+	if (od->_state != OMAP_DEVICE_STATE_IDLE)
+		return 0;
+	else if (new_wakeup_lat_limit > od->dev_wakeup_lat)
+		ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
+	else if (new_wakeup_lat_limit < od->dev_wakeup_lat)
+		ret = _omap_device_activate(od, USE_WAKEUP_LAT);
+
+	return ret;
+}
+
+/**
+ * omap_device_get_pwrdm - return the powerdomain * associated with @od
+ * @od: struct omap_device *
+ *
+ * Return the powerdomain associated with the first underlying
+ * omap_hwmod for this omap_device.  Intended for use by core OMAP PM
+ * code.  Returns NULL on error or a struct powerdomain * upon
+ * success.
+ */
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
+{
+	/*
+	 * XXX Assumes that all omap_hwmod powerdomains are identical.
+	 * This may not necessarily be true.  There should be a sanity
+	 * check in here to WARN() if any difference appears.
+	 */
+	if (!od->hwmods_cnt)
+		return NULL;
+
+	return omap_hwmod_get_pwrdm(od->hwmods[0]);
+}
+
+/**
+ * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base
+ * @od: struct omap_device *
+ *
+ * Return the MPU's virtual address for the base of the hwmod, from
+ * the ioremap() that the hwmod code does.  Only valid if there is one
+ * hwmod associated with this device.  Returns NULL if there are zero
+ * or more than one hwmods associated with this omap_device;
+ * otherwise, passes along the return value from
+ * omap_hwmod_get_mpu_rt_va().
+ */
+void __iomem *omap_device_get_rt_va(struct omap_device *od)
+{
+	if (od->hwmods_cnt != 1)
+		return NULL;
+
+	return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
+}
+
+/**
+ * omap_device_get_by_hwmod_name() - convert a hwmod name to
+ * device pointer.
+ * @oh_name: name of the hwmod device
+ *
+ * Returns back a struct device * pointer associated with a hwmod
+ * device represented by a hwmod_name
+ */
+struct device *omap_device_get_by_hwmod_name(const char *oh_name)
+{
+	struct omap_hwmod *oh;
+
+	if (!oh_name) {
+		WARN(1, "%s: no hwmod name!\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (IS_ERR_OR_NULL(oh)) {
+		WARN(1, "%s: no hwmod for %s\n", __func__,
+			oh_name);
+		return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
+	}
+	if (IS_ERR_OR_NULL(oh->od)) {
+		WARN(1, "%s: no omap_device for %s\n", __func__,
+			oh_name);
+		return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
+	}
+
+	if (IS_ERR_OR_NULL(oh->od->pdev))
+		return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
+
+	return &oh->od->pdev->dev;
+}
+EXPORT_SYMBOL(omap_device_get_by_hwmod_name);
+
+/*
+ * Public functions intended for use in omap_device_pm_latency
+ * .activate_func and .deactivate_func function pointers
+ */
+
+/**
+ * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods
+ * @od: struct omap_device *od
+ *
+ * Enable all underlying hwmods.  Returns 0.
+ */
+int omap_device_enable_hwmods(struct omap_device *od)
+{
+	int i;
+
+	for (i = 0; i < od->hwmods_cnt; i++)
+		omap_hwmod_enable(od->hwmods[i]);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+/**
+ * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
+ * @od: struct omap_device *od
+ *
+ * Idle all underlying hwmods.  Returns 0.
+ */
+int omap_device_idle_hwmods(struct omap_device *od)
+{
+	int i;
+
+	for (i = 0; i < od->hwmods_cnt; i++)
+		omap_hwmod_idle(od->hwmods[i]);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+/**
+ * omap_device_disable_clocks - disable all main and interface clocks
+ * @od: struct omap_device *od
+ *
+ * Disable the main functional clock and interface clock for all of the
+ * omap_hwmods associated with the omap_device.  Returns 0.
+ */
+int omap_device_disable_clocks(struct omap_device *od)
+{
+	int i;
+
+	for (i = 0; i < od->hwmods_cnt; i++)
+		omap_hwmod_disable_clocks(od->hwmods[i]);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+/**
+ * omap_device_enable_clocks - enable all main and interface clocks
+ * @od: struct omap_device *od
+ *
+ * Enable the main functional clock and interface clock for all of the
+ * omap_hwmods associated with the omap_device.  Returns 0.
+ */
+int omap_device_enable_clocks(struct omap_device *od)
+{
+	int i;
+
+	for (i = 0; i < od->hwmods_cnt; i++)
+		omap_hwmod_enable_clocks(od->hwmods[i]);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+static struct notifier_block platform_nb = {
+	.notifier_call = _omap_device_notifier_call,
+};
+
+static int __init omap_device_init(void)
+{
+	bus_register_notifier(&platform_bus_type, &platform_nb);
+	return 0;
+}
+core_initcall(omap_device_init);
+
+/**
+ * omap_device_late_idle - idle devices without drivers
+ * @dev: struct device * associated with omap_device
+ * @data: unused
+ *
+ * Check the driver bound status of this device, and idle it
+ * if there is no driver attached.
+ */
+static int __init omap_device_late_idle(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *od = to_omap_device(pdev);
+
+	if (!od)
+		return 0;
+
+	/*
+	 * If omap_device state is enabled, but has no driver bound,
+	 * idle it.
+	 */
+	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
+		if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+			dev_warn(dev, "%s: enabled but no driver.  Idling\n",
+				 __func__);
+			omap_device_idle(pdev);
+		}
+	}
+
+	return 0;
+}
+
+static int __init omap_device_late_init(void)
+{
+	bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+	return 0;
+}
+late_initcall(omap_device_late_init);
diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h
new file mode 100644
index 000000000000..106f50665804
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -0,0 +1,176 @@
+/*
+ * omap_device headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Eventually this type of functionality should either be
+ * a) implemented via arch-specific pointers in platform_device
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_device
+ *
+ * omap_device differs from omap_hwmod in that it includes external
+ * (e.g., board- and system-level) integration details.  omap_hwmod
+ * stores hardware data that is invariant for a given OMAP chip.
+ *
+ * To do:
+ * - GPIO integration
+ * - regulator integration
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <plat/omap_hwmod.h>
+
+extern struct dev_pm_domain omap_device_pm_domain;
+
+/* omap_device._state values */
+#define OMAP_DEVICE_STATE_UNKNOWN	0
+#define OMAP_DEVICE_STATE_ENABLED	1
+#define OMAP_DEVICE_STATE_IDLE		2
+#define OMAP_DEVICE_STATE_SHUTDOWN	3
+
+/* omap_device.flags values */
+#define OMAP_DEVICE_SUSPENDED BIT(0)
+#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1)
+
+/**
+ * struct omap_device - omap_device wrapper for platform_devices
+ * @pdev: platform_device
+ * @hwmods: (one .. many per omap_device)
+ * @hwmods_cnt: ARRAY_SIZE() of @hwmods
+ * @pm_lats: ptr to an omap_device_pm_latency table
+ * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
+ * @pm_lat_level: array index of the last odpl entry executed - -1 if never
+ * @dev_wakeup_lat: dev wakeup latency in nanoseconds
+ * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
+ * @_state: one of OMAP_DEVICE_STATE_* (see above)
+ * @flags: device flags
+ * @_driver_status: one of BUS_NOTIFY_*_DRIVER from <linux/device.h>
+ *
+ * Integrates omap_hwmod data into Linux platform_device.
+ *
+ * Field names beginning with underscores are for the internal use of
+ * the omap_device code.
+ *
+ */
+struct omap_device {
+	struct platform_device		*pdev;
+	struct omap_hwmod		**hwmods;
+	struct omap_device_pm_latency	*pm_lats;
+	u32				dev_wakeup_lat;
+	u32				_dev_wakeup_lat_limit;
+	unsigned long			_driver_status;
+	u8				pm_lats_cnt;
+	s8				pm_lat_level;
+	u8				hwmods_cnt;
+	u8				_state;
+	u8                              flags;
+};
+
+/* Device driver interface (call via platform_data fn ptrs) */
+
+int omap_device_enable(struct platform_device *pdev);
+int omap_device_idle(struct platform_device *pdev);
+int omap_device_shutdown(struct platform_device *pdev);
+
+/* Core code interface */
+
+struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
+				      struct omap_hwmod *oh, void *pdata,
+				      int pdata_len,
+				      struct omap_device_pm_latency *pm_lats,
+				      int pm_lats_cnt, int is_early_device);
+
+struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+					 struct omap_hwmod **oh, int oh_cnt,
+					 void *pdata, int pdata_len,
+					 struct omap_device_pm_latency *pm_lats,
+					 int pm_lats_cnt, int is_early_device);
+
+struct omap_device *omap_device_alloc(struct platform_device *pdev,
+				      struct omap_hwmod **ohs, int oh_cnt,
+				      struct omap_device_pm_latency *pm_lats,
+				      int pm_lats_cnt);
+void omap_device_delete(struct omap_device *od);
+int omap_device_register(struct platform_device *pdev);
+
+void __iomem *omap_device_get_rt_va(struct omap_device *od);
+struct device *omap_device_get_by_hwmod_name(const char *oh_name);
+
+/* OMAP PM interface */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+			     u32 new_wakeup_lat_limit);
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
+int omap_device_get_context_loss_count(struct platform_device *pdev);
+
+/* Other */
+
+int omap_device_assert_hardreset(struct platform_device *pdev,
+				 const char *name);
+int omap_device_deassert_hardreset(struct platform_device *pdev,
+				 const char *name);
+int omap_device_idle_hwmods(struct omap_device *od);
+int omap_device_enable_hwmods(struct omap_device *od);
+
+int omap_device_disable_clocks(struct omap_device *od);
+int omap_device_enable_clocks(struct omap_device *od);
+
+/*
+ * Entries should be kept in latency order ascending
+ *
+ * deact_lat is the maximum number of microseconds required to complete
+ * deactivate_func() at the device's slowest OPP.
+ *
+ * act_lat is the maximum number of microseconds required to complete
+ * activate_func() at the device's slowest OPP.
+ *
+ * This will result in some suboptimal power management decisions at fast
+ * OPPs, but avoids having to recompute all device power management decisions
+ * if the system shifts from a fast OPP to a slow OPP (in order to meet
+ * latency requirements).
+ *
+ * XXX should deactivate_func/activate_func() take platform_device pointers
+ * rather than omap_device pointers?
+ */
+struct omap_device_pm_latency {
+	u32 deactivate_lat;
+	u32 deactivate_lat_worst;
+	int (*deactivate_func)(struct omap_device *od);
+	u32 activate_lat;
+	u32 activate_lat_worst;
+	int (*activate_func)(struct omap_device *od);
+	u32 flags;
+};
+
+#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
+
+/* Get omap_device pointer from platform_device pointer */
+static inline struct omap_device *to_omap_device(struct platform_device *pdev)
+{
+	return pdev ? pdev->archdata.od : NULL;
+}
+
+static inline
+void omap_device_disable_idle_on_suspend(struct platform_device *pdev)
+{
+	struct omap_device *od = to_omap_device(pdev);
+
+	od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index 58e16aef40bb..bd41d59a7cab 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -20,7 +20,7 @@
 #include <linux/opp.h>
 #include <linux/cpu.h>
 
-#include <plat/omap_device.h>
+#include "omap_device.h"
 
 #include "omap_opp_data.h"
 
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index ea61c32957bd..4f749a1e3aa2 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -21,7 +21,7 @@
 #include <asm/system_misc.h>
 
 #include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include "common.h"
 
 #include "prcm-common.h"
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index 2a791766283d..4b3230fe228a 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -16,7 +16,7 @@
 #include <asm/pmu.h>
 
 #include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 
 static char *omap2_pmu_oh_names[] = {"mpu"};
 static char *omap3_pmu_oh_names[] = {"mpu", "debugss"};
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 67c41961fa42..5df6dd96fd5c 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -31,7 +31,7 @@
 #include "common.h"
 #include <plat-omap/dma-omap.h>
 #include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include <plat/omap-pm.h>
 #include <plat/serial.h>
 
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index f8217a5a4a26..1536aa8fffcf 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -23,7 +23,7 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 
-#include <plat/omap_device.h>
+#include "omap_device.h"
 
 #include "voltage.h"
 #include "control.h"
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 44f9aa7ec0c0..a2ea2f30f7c9 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -44,7 +44,7 @@
 
 #include <asm/arch_timer.h>
 #include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 #include <plat/dmtimer.h>
 #include <plat/omap-pm.h>
 
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 3c434498e12e..84d82280d291 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -26,7 +26,7 @@
 #include <asm/io.h>
 
 #include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 
 #include "mux.h"
 
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 51da21cb78f1..24f300a34904 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -26,7 +26,7 @@
 #include <linux/usb/musb.h>
 
 #include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
 
 #include "am35xx.h"
 
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index dacaee009a4e..9c81cf539218 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -9,7 +9,6 @@ obj-n :=
 obj-  :=
 
 # omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
 
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
deleted file mode 100644
index 106f50665804..000000000000
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * omap_device headers
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * Developed in collaboration with (alphabetical order): Benoit
- * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
- * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
- * Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Eventually this type of functionality should either be
- * a) implemented via arch-specific pointers in platform_device
- * or
- * b) implemented as a proper omap_bus/omap_device in Linux, no more
- *    platform_device
- *
- * omap_device differs from omap_hwmod in that it includes external
- * (e.g., board- and system-level) integration details.  omap_hwmod
- * stores hardware data that is invariant for a given OMAP chip.
- *
- * To do:
- * - GPIO integration
- * - regulator integration
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/omap_hwmod.h>
-
-extern struct dev_pm_domain omap_device_pm_domain;
-
-/* omap_device._state values */
-#define OMAP_DEVICE_STATE_UNKNOWN	0
-#define OMAP_DEVICE_STATE_ENABLED	1
-#define OMAP_DEVICE_STATE_IDLE		2
-#define OMAP_DEVICE_STATE_SHUTDOWN	3
-
-/* omap_device.flags values */
-#define OMAP_DEVICE_SUSPENDED BIT(0)
-#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1)
-
-/**
- * struct omap_device - omap_device wrapper for platform_devices
- * @pdev: platform_device
- * @hwmods: (one .. many per omap_device)
- * @hwmods_cnt: ARRAY_SIZE() of @hwmods
- * @pm_lats: ptr to an omap_device_pm_latency table
- * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
- * @pm_lat_level: array index of the last odpl entry executed - -1 if never
- * @dev_wakeup_lat: dev wakeup latency in nanoseconds
- * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
- * @_state: one of OMAP_DEVICE_STATE_* (see above)
- * @flags: device flags
- * @_driver_status: one of BUS_NOTIFY_*_DRIVER from <linux/device.h>
- *
- * Integrates omap_hwmod data into Linux platform_device.
- *
- * Field names beginning with underscores are for the internal use of
- * the omap_device code.
- *
- */
-struct omap_device {
-	struct platform_device		*pdev;
-	struct omap_hwmod		**hwmods;
-	struct omap_device_pm_latency	*pm_lats;
-	u32				dev_wakeup_lat;
-	u32				_dev_wakeup_lat_limit;
-	unsigned long			_driver_status;
-	u8				pm_lats_cnt;
-	s8				pm_lat_level;
-	u8				hwmods_cnt;
-	u8				_state;
-	u8                              flags;
-};
-
-/* Device driver interface (call via platform_data fn ptrs) */
-
-int omap_device_enable(struct platform_device *pdev);
-int omap_device_idle(struct platform_device *pdev);
-int omap_device_shutdown(struct platform_device *pdev);
-
-/* Core code interface */
-
-struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
-				      struct omap_hwmod *oh, void *pdata,
-				      int pdata_len,
-				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt, int is_early_device);
-
-struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
-					 struct omap_hwmod **oh, int oh_cnt,
-					 void *pdata, int pdata_len,
-					 struct omap_device_pm_latency *pm_lats,
-					 int pm_lats_cnt, int is_early_device);
-
-struct omap_device *omap_device_alloc(struct platform_device *pdev,
-				      struct omap_hwmod **ohs, int oh_cnt,
-				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt);
-void omap_device_delete(struct omap_device *od);
-int omap_device_register(struct platform_device *pdev);
-
-void __iomem *omap_device_get_rt_va(struct omap_device *od);
-struct device *omap_device_get_by_hwmod_name(const char *oh_name);
-
-/* OMAP PM interface */
-int omap_device_align_pm_lat(struct platform_device *pdev,
-			     u32 new_wakeup_lat_limit);
-struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
-int omap_device_get_context_loss_count(struct platform_device *pdev);
-
-/* Other */
-
-int omap_device_assert_hardreset(struct platform_device *pdev,
-				 const char *name);
-int omap_device_deassert_hardreset(struct platform_device *pdev,
-				 const char *name);
-int omap_device_idle_hwmods(struct omap_device *od);
-int omap_device_enable_hwmods(struct omap_device *od);
-
-int omap_device_disable_clocks(struct omap_device *od);
-int omap_device_enable_clocks(struct omap_device *od);
-
-/*
- * Entries should be kept in latency order ascending
- *
- * deact_lat is the maximum number of microseconds required to complete
- * deactivate_func() at the device's slowest OPP.
- *
- * act_lat is the maximum number of microseconds required to complete
- * activate_func() at the device's slowest OPP.
- *
- * This will result in some suboptimal power management decisions at fast
- * OPPs, but avoids having to recompute all device power management decisions
- * if the system shifts from a fast OPP to a slow OPP (in order to meet
- * latency requirements).
- *
- * XXX should deactivate_func/activate_func() take platform_device pointers
- * rather than omap_device pointers?
- */
-struct omap_device_pm_latency {
-	u32 deactivate_lat;
-	u32 deactivate_lat_worst;
-	int (*deactivate_func)(struct omap_device *od);
-	u32 activate_lat;
-	u32 activate_lat_worst;
-	int (*activate_func)(struct omap_device *od);
-	u32 flags;
-};
-
-#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
-
-/* Get omap_device pointer from platform_device pointer */
-static inline struct omap_device *to_omap_device(struct platform_device *pdev)
-{
-	return pdev ? pdev->archdata.od : NULL;
-}
-
-static inline
-void omap_device_disable_idle_on_suspend(struct platform_device *pdev)
-{
-	struct omap_device *od = to_omap_device(pdev);
-
-	od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
-}
-
-#endif
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 9722f418ae1f..3c96b567370e 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -24,7 +24,8 @@
 
 /* Interface documentation is in mach/omap-pm.h */
 #include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+
+#include "../mach-omap2/omap_device.h"
 
 static bool off_mode_enabled;
 static int dummy_context_loss_counter;
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
deleted file mode 100644
index 7a7d1f2a65e9..000000000000
--- a/arch/arm/plat-omap/omap_device.c
+++ /dev/null
@@ -1,1278 +0,0 @@
-/*
- * omap_device implementation
- *
- * Copyright (C) 2009-2010 Nokia Corporation
- * Paul Walmsley, Kevin Hilman
- *
- * Developed in collaboration with (alphabetical order): Benoit
- * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram
- * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
- * Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This code provides a consistent interface for OMAP device drivers
- * to control power management and interconnect properties of their
- * devices.
- *
- * In the medium- to long-term, this code should either be
- * a) implemented via arch-specific pointers in platform_data
- * or
- * b) implemented as a proper omap_bus/omap_device in Linux, no more
- *    platform_data func pointers
- *
- *
- * Guidelines for usage by driver authors:
- *
- * 1. These functions are intended to be used by device drivers via
- * function pointers in struct platform_data.  As an example,
- * omap_device_enable() should be passed to the driver as
- *
- * struct foo_driver_platform_data {
- * ...
- *      int (*device_enable)(struct platform_device *pdev);
- * ...
- * }
- *
- * Note that the generic "device_enable" name is used, rather than
- * "omap_device_enable".  This is so other architectures can pass in their
- * own enable/disable functions here.
- *
- * This should be populated during device setup:
- *
- * ...
- * pdata->device_enable = omap_device_enable;
- * ...
- *
- * 2. Drivers should first check to ensure the function pointer is not null
- * before calling it, as in:
- *
- * if (pdata->device_enable)
- *     pdata->device_enable(pdev);
- *
- * This allows other architectures that don't use similar device_enable()/
- * device_shutdown() functions to execute normally.
- *
- * ...
- *
- * Suggested usage by device drivers:
- *
- * During device initialization:
- * device_enable()
- *
- * During device idle:
- * (save remaining device context if necessary)
- * device_idle();
- *
- * During device resume:
- * device_enable();
- * (restore context if necessary)
- *
- * During device shutdown:
- * device_shutdown()
- * (device must be reinitialized at this point to use it again)
- *
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/pm_runtime.h>
-#include <linux/of.h>
-#include <linux/notifier.h>
-
-#include <plat/omap_device.h>
-#include <plat/omap_hwmod.h>
-#include <plat/clock.h>
-
-/* These parameters are passed to _omap_device_{de,}activate() */
-#define USE_WAKEUP_LAT			0
-#define IGNORE_WAKEUP_LAT		1
-
-static int omap_early_device_register(struct platform_device *pdev);
-
-static struct omap_device_pm_latency omap_default_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	}
-};
-
-/* Private functions */
-
-/**
- * _omap_device_activate - increase device readiness
- * @od: struct omap_device *
- * @ignore_lat: increase to latency target (0) or full readiness (1)?
- *
- * Increase readiness of omap_device @od (thus decreasing device
- * wakeup latency, but consuming more power).  If @ignore_lat is
- * IGNORE_WAKEUP_LAT, make the omap_device fully active.  Otherwise,
- * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
- * latency is greater than the requested maximum wakeup latency, step
- * backwards in the omap_device_pm_latency table to ensure the
- * device's maximum wakeup latency is less than or equal to the
- * requested maximum wakeup latency.  Returns 0.
- */
-static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
-{
-	struct timespec a, b, c;
-
-	dev_dbg(&od->pdev->dev, "omap_device: activating\n");
-
-	while (od->pm_lat_level > 0) {
-		struct omap_device_pm_latency *odpl;
-		unsigned long long act_lat = 0;
-
-		od->pm_lat_level--;
-
-		odpl = od->pm_lats + od->pm_lat_level;
-
-		if (!ignore_lat &&
-		    (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
-			break;
-
-		read_persistent_clock(&a);
-
-		/* XXX check return code */
-		odpl->activate_func(od);
-
-		read_persistent_clock(&b);
-
-		c = timespec_sub(b, a);
-		act_lat = timespec_to_ns(&c);
-
-		dev_dbg(&od->pdev->dev,
-			"omap_device: pm_lat %d: activate: elapsed time %llu nsec\n",
-			od->pm_lat_level, act_lat);
-
-		if (act_lat > odpl->activate_lat) {
-			odpl->activate_lat_worst = act_lat;
-			if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
-				odpl->activate_lat = act_lat;
-				dev_dbg(&od->pdev->dev,
-					"new worst case activate latency %d: %llu\n",
-					od->pm_lat_level, act_lat);
-			} else
-				dev_warn(&od->pdev->dev,
-					 "activate latency %d higher than expected. (%llu > %d)\n",
-					 od->pm_lat_level, act_lat,
-					 odpl->activate_lat);
-		}
-
-		od->dev_wakeup_lat -= odpl->activate_lat;
-	}
-
-	return 0;
-}
-
-/**
- * _omap_device_deactivate - decrease device readiness
- * @od: struct omap_device *
- * @ignore_lat: decrease to latency target (0) or full inactivity (1)?
- *
- * Decrease readiness of omap_device @od (thus increasing device
- * wakeup latency, but conserving power).  If @ignore_lat is
- * IGNORE_WAKEUP_LAT, make the omap_device fully inactive.  Otherwise,
- * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
- * latency is less than the requested maximum wakeup latency, step
- * forwards in the omap_device_pm_latency table to ensure the device's
- * maximum wakeup latency is less than or equal to the requested
- * maximum wakeup latency.  Returns 0.
- */
-static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
-{
-	struct timespec a, b, c;
-
-	dev_dbg(&od->pdev->dev, "omap_device: deactivating\n");
-
-	while (od->pm_lat_level < od->pm_lats_cnt) {
-		struct omap_device_pm_latency *odpl;
-		unsigned long long deact_lat = 0;
-
-		odpl = od->pm_lats + od->pm_lat_level;
-
-		if (!ignore_lat &&
-		    ((od->dev_wakeup_lat + odpl->activate_lat) >
-		     od->_dev_wakeup_lat_limit))
-			break;
-
-		read_persistent_clock(&a);
-
-		/* XXX check return code */
-		odpl->deactivate_func(od);
-
-		read_persistent_clock(&b);
-
-		c = timespec_sub(b, a);
-		deact_lat = timespec_to_ns(&c);
-
-		dev_dbg(&od->pdev->dev,
-			"omap_device: pm_lat %d: deactivate: elapsed time %llu nsec\n",
-			od->pm_lat_level, deact_lat);
-
-		if (deact_lat > odpl->deactivate_lat) {
-			odpl->deactivate_lat_worst = deact_lat;
-			if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
-				odpl->deactivate_lat = deact_lat;
-				dev_dbg(&od->pdev->dev,
-					"new worst case deactivate latency %d: %llu\n",
-					od->pm_lat_level, deact_lat);
-			} else
-				dev_warn(&od->pdev->dev,
-					 "deactivate latency %d higher than expected. (%llu > %d)\n",
-					 od->pm_lat_level, deact_lat,
-					 odpl->deactivate_lat);
-		}
-
-		od->dev_wakeup_lat += odpl->activate_lat;
-
-		od->pm_lat_level++;
-	}
-
-	return 0;
-}
-
-static void _add_clkdev(struct omap_device *od, const char *clk_alias,
-		       const char *clk_name)
-{
-	struct clk *r;
-	struct clk_lookup *l;
-
-	if (!clk_alias || !clk_name)
-		return;
-
-	dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name);
-
-	r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
-	if (!IS_ERR(r)) {
-		dev_warn(&od->pdev->dev,
-			 "alias %s already exists\n", clk_alias);
-		clk_put(r);
-		return;
-	}
-
-	r = clk_get(NULL, clk_name);
-	if (IS_ERR(r)) {
-		dev_err(&od->pdev->dev,
-			"clk_get for %s failed\n", clk_name);
-		return;
-	}
-
-	l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev));
-	if (!l) {
-		dev_err(&od->pdev->dev,
-			"clkdev_alloc for %s failed\n", clk_alias);
-		return;
-	}
-
-	clkdev_add(l);
-}
-
-/**
- * _add_hwmod_clocks_clkdev - Add clkdev entry for hwmod optional clocks
- * and main clock
- * @od: struct omap_device *od
- * @oh: struct omap_hwmod *oh
- *
- * For the main clock and every optional clock present per hwmod per
- * omap_device, this function adds an entry in the clkdev table of the
- * form <dev-id=dev_name, con-id=role> if it does not exist already.
- *
- * The function is called from inside omap_device_build_ss(), after
- * omap_device_register.
- *
- * This allows drivers to get a pointer to its optional clocks based on its role
- * by calling clk_get(<dev*>, <role>).
- * In the case of the main clock, a "fck" alias is used.
- *
- * No return value.
- */
-static void _add_hwmod_clocks_clkdev(struct omap_device *od,
-				     struct omap_hwmod *oh)
-{
-	int i;
-
-	_add_clkdev(od, "fck", oh->main_clk);
-
-	for (i = 0; i < oh->opt_clks_cnt; i++)
-		_add_clkdev(od, oh->opt_clks[i].role, oh->opt_clks[i].clk);
-}
-
-
-/**
- * omap_device_build_from_dt - build an omap_device with multiple hwmods
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- * @pm_lats: pointer to a omap_device_pm_latency array for this device
- * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
- * @is_early_device: should the device be registered as an early device or not
- *
- * Function for building an omap_device already registered from device-tree
- *
- * Returns 0 or PTR_ERR() on error.
- */
-static int omap_device_build_from_dt(struct platform_device *pdev)
-{
-	struct omap_hwmod **hwmods;
-	struct omap_device *od;
-	struct omap_hwmod *oh;
-	struct device_node *node = pdev->dev.of_node;
-	const char *oh_name;
-	int oh_cnt, i, ret = 0;
-
-	oh_cnt = of_property_count_strings(node, "ti,hwmods");
-	if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
-		dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n");
-		return -ENODEV;
-	}
-
-	hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
-	if (!hwmods) {
-		ret = -ENOMEM;
-		goto odbfd_exit;
-	}
-
-	for (i = 0; i < oh_cnt; i++) {
-		of_property_read_string_index(node, "ti,hwmods", i, &oh_name);
-		oh = omap_hwmod_lookup(oh_name);
-		if (!oh) {
-			dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n",
-				oh_name);
-			ret = -EINVAL;
-			goto odbfd_exit1;
-		}
-		hwmods[i] = oh;
-	}
-
-	od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0);
-	if (!od) {
-		dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
-			oh_name);
-		ret = PTR_ERR(od);
-		goto odbfd_exit1;
-	}
-
-	/* Fix up missing resource names */
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource *r = &pdev->resource[i];
-
-		if (r->name == NULL)
-			r->name = dev_name(&pdev->dev);
-	}
-
-	if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
-		omap_device_disable_idle_on_suspend(pdev);
-
-	pdev->dev.pm_domain = &omap_device_pm_domain;
-
-odbfd_exit1:
-	kfree(hwmods);
-odbfd_exit:
-	return ret;
-}
-
-static int _omap_device_notifier_call(struct notifier_block *nb,
-				      unsigned long event, void *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od;
-
-	switch (event) {
-	case BUS_NOTIFY_DEL_DEVICE:
-		if (pdev->archdata.od)
-			omap_device_delete(pdev->archdata.od);
-		break;
-	case BUS_NOTIFY_ADD_DEVICE:
-		if (pdev->dev.of_node)
-			omap_device_build_from_dt(pdev);
-		/* fall through */
-	default:
-		od = to_omap_device(pdev);
-		if (od)
-			od->_driver_status = event;
-	}
-
-	return NOTIFY_DONE;
-}
-
-
-/* Public functions for use by core code */
-
-/**
- * omap_device_get_context_loss_count - get lost context count
- * @od: struct omap_device *
- *
- * Using the primary hwmod, query the context loss count for this
- * device.
- *
- * Callers should consider context for this device lost any time this
- * function returns a value different than the value the caller got
- * the last time it called this function.
- *
- * If any hwmods exist for the omap_device assoiated with @pdev,
- * return the context loss counter for that hwmod, otherwise return
- * zero.
- */
-int omap_device_get_context_loss_count(struct platform_device *pdev)
-{
-	struct omap_device *od;
-	u32 ret = 0;
-
-	od = to_omap_device(pdev);
-
-	if (od->hwmods_cnt)
-		ret = omap_hwmod_get_context_loss_count(od->hwmods[0]);
-
-	return ret;
-}
-
-/**
- * omap_device_count_resources - count number of struct resource entries needed
- * @od: struct omap_device *
- *
- * Count the number of struct resource entries needed for this
- * omap_device @od.  Used by omap_device_build_ss() to determine how
- * much memory to allocate before calling
- * omap_device_fill_resources().  Returns the count.
- */
-static int omap_device_count_resources(struct omap_device *od)
-{
-	int c = 0;
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		c += omap_hwmod_count_resources(od->hwmods[i]);
-
-	pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n",
-		 od->pdev->name, c, od->hwmods_cnt);
-
-	return c;
-}
-
-/**
- * omap_device_fill_resources - fill in array of struct resource
- * @od: struct omap_device *
- * @res: pointer to an array of struct resource to be filled in
- *
- * Populate one or more empty struct resource pointed to by @res with
- * the resource data for this omap_device @od.  Used by
- * omap_device_build_ss() after calling omap_device_count_resources().
- * Ideally this function would not be needed at all.  If omap_device
- * replaces platform_device, then we can specify our own
- * get_resource()/ get_irq()/etc functions that use the underlying
- * omap_hwmod information.  Or if platform_device is extended to use
- * subarchitecture-specific function pointers, the various
- * platform_device functions can simply call omap_device internal
- * functions to get device resources.  Hacking around the existing
- * platform_device code wastes memory.  Returns 0.
- */
-static int omap_device_fill_resources(struct omap_device *od,
-				      struct resource *res)
-{
-	int i, r;
-
-	for (i = 0; i < od->hwmods_cnt; i++) {
-		r = omap_hwmod_fill_resources(od->hwmods[i], res);
-		res += r;
-	}
-
-	return 0;
-}
-
-/**
- * _od_fill_dma_resources - fill in array of struct resource with dma resources
- * @od: struct omap_device *
- * @res: pointer to an array of struct resource to be filled in
- *
- * Populate one or more empty struct resource pointed to by @res with
- * the dma resource data for this omap_device @od.  Used by
- * omap_device_alloc() after calling omap_device_count_resources().
- *
- * Ideally this function would not be needed at all.  If we have
- * mechanism to get dma resources from DT.
- *
- * Returns 0.
- */
-static int _od_fill_dma_resources(struct omap_device *od,
-				      struct resource *res)
-{
-	int i, r;
-
-	for (i = 0; i < od->hwmods_cnt; i++) {
-		r = omap_hwmod_fill_dma_resources(od->hwmods[i], res);
-		res += r;
-	}
-
-	return 0;
-}
-
-/**
- * omap_device_alloc - allocate an omap_device
- * @pdev: platform_device that will be included in this omap_device
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- * @pm_lats: pointer to a omap_device_pm_latency array for this device
- * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
- *
- * Convenience function for allocating an omap_device structure and filling
- * hwmods, resources and pm_latency attributes.
- *
- * Returns an struct omap_device pointer or ERR_PTR() on error;
- */
-struct omap_device *omap_device_alloc(struct platform_device *pdev,
-					struct omap_hwmod **ohs, int oh_cnt,
-					struct omap_device_pm_latency *pm_lats,
-					int pm_lats_cnt)
-{
-	int ret = -ENOMEM;
-	struct omap_device *od;
-	struct resource *res = NULL;
-	int i, res_count;
-	struct omap_hwmod **hwmods;
-
-	od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
-	if (!od) {
-		ret = -ENOMEM;
-		goto oda_exit1;
-	}
-	od->hwmods_cnt = oh_cnt;
-
-	hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
-	if (!hwmods)
-		goto oda_exit2;
-
-	od->hwmods = hwmods;
-	od->pdev = pdev;
-
-	res_count = omap_device_count_resources(od);
-	/*
-	 * DT Boot:
-	 *   OF framework will construct the resource structure (currently
-	 *   does for MEM & IRQ resource) and we should respect/use these
-	 *   resources, killing hwmod dependency.
-	 *   If pdev->num_resources > 0, we assume that MEM & IRQ resources
-	 *   have been allocated by OF layer already (through DTB).
-	 *
-	 * Non-DT Boot:
-	 *   Here, pdev->num_resources = 0, and we should get all the
-	 *   resources from hwmod.
-	 *
-	 * TODO: Once DMA resource is available from OF layer, we should
-	 *   kill filling any resources from hwmod.
-	 */
-	if (res_count > pdev->num_resources) {
-		/* Allocate resources memory to account for new resources */
-		res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
-		if (!res)
-			goto oda_exit3;
-
-		/*
-		 * If pdev->num_resources > 0, then assume that,
-		 * MEM and IRQ resources will only come from DT and only
-		 * fill DMA resource from hwmod layer.
-		 */
-		if (pdev->num_resources && pdev->resource) {
-			dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n",
-				__func__, res_count);
-			memcpy(res, pdev->resource,
-			       sizeof(struct resource) * pdev->num_resources);
-			_od_fill_dma_resources(od, &res[pdev->num_resources]);
-		} else {
-			dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n",
-				__func__, res_count);
-			omap_device_fill_resources(od, res);
-		}
-
-		ret = platform_device_add_resources(pdev, res, res_count);
-		kfree(res);
-
-		if (ret)
-			goto oda_exit3;
-	}
-
-	if (!pm_lats) {
-		pm_lats = omap_default_latency;
-		pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
-	}
-
-	od->pm_lats_cnt = pm_lats_cnt;
-	od->pm_lats = kmemdup(pm_lats,
-			sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
-			GFP_KERNEL);
-	if (!od->pm_lats)
-		goto oda_exit3;
-
-	pdev->archdata.od = od;
-
-	for (i = 0; i < oh_cnt; i++) {
-		hwmods[i]->od = od;
-		_add_hwmod_clocks_clkdev(od, hwmods[i]);
-	}
-
-	return od;
-
-oda_exit3:
-	kfree(hwmods);
-oda_exit2:
-	kfree(od);
-oda_exit1:
-	dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret);
-
-	return ERR_PTR(ret);
-}
-
-void omap_device_delete(struct omap_device *od)
-{
-	if (!od)
-		return;
-
-	od->pdev->archdata.od = NULL;
-	kfree(od->pm_lats);
-	kfree(od->hwmods);
-	kfree(od);
-}
-
-/**
- * omap_device_build - build and register an omap_device with one omap_hwmod
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- * @pm_lats: pointer to a omap_device_pm_latency array for this device
- * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
- * @is_early_device: should the device be registered as an early device or not
- *
- * Convenience function for building and registering a single
- * omap_device record, which in turn builds and registers a
- * platform_device record.  See omap_device_build_ss() for more
- * information.  Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
- * passes along the return value of omap_device_build_ss().
- */
-struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id,
-				      struct omap_hwmod *oh, void *pdata,
-				      int pdata_len,
-				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt, int is_early_device)
-{
-	struct omap_hwmod *ohs[] = { oh };
-
-	if (!oh)
-		return ERR_PTR(-EINVAL);
-
-	return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
-				    pdata_len, pm_lats, pm_lats_cnt,
-				    is_early_device);
-}
-
-/**
- * omap_device_build_ss - build and register an omap_device with multiple hwmods
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- * @pm_lats: pointer to a omap_device_pm_latency array for this device
- * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
- * @is_early_device: should the device be registered as an early device or not
- *
- * Convenience function for building and registering an omap_device
- * subsystem record.  Subsystem records consist of multiple
- * omap_hwmods.  This function in turn builds and registers a
- * platform_device record.  Returns an ERR_PTR() on error, or passes
- * along the return value of omap_device_register().
- */
-struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id,
-					 struct omap_hwmod **ohs, int oh_cnt,
-					 void *pdata, int pdata_len,
-					 struct omap_device_pm_latency *pm_lats,
-					 int pm_lats_cnt, int is_early_device)
-{
-	int ret = -ENOMEM;
-	struct platform_device *pdev;
-	struct omap_device *od;
-
-	if (!ohs || oh_cnt == 0 || !pdev_name)
-		return ERR_PTR(-EINVAL);
-
-	if (!pdata && pdata_len > 0)
-		return ERR_PTR(-EINVAL);
-
-	pdev = platform_device_alloc(pdev_name, pdev_id);
-	if (!pdev) {
-		ret = -ENOMEM;
-		goto odbs_exit;
-	}
-
-	/* Set the dev_name early to allow dev_xxx in omap_device_alloc */
-	if (pdev->id != -1)
-		dev_set_name(&pdev->dev, "%s.%d", pdev->name,  pdev->id);
-	else
-		dev_set_name(&pdev->dev, "%s", pdev->name);
-
-	od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt);
-	if (IS_ERR(od))
-		goto odbs_exit1;
-
-	ret = platform_device_add_data(pdev, pdata, pdata_len);
-	if (ret)
-		goto odbs_exit2;
-
-	if (is_early_device)
-		ret = omap_early_device_register(pdev);
-	else
-		ret = omap_device_register(pdev);
-	if (ret)
-		goto odbs_exit2;
-
-	return pdev;
-
-odbs_exit2:
-	omap_device_delete(od);
-odbs_exit1:
-	platform_device_put(pdev);
-odbs_exit:
-
-	pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
-
-	return ERR_PTR(ret);
-}
-
-/**
- * omap_early_device_register - register an omap_device as an early platform
- * device.
- * @od: struct omap_device * to register
- *
- * Register the omap_device structure.  This currently just calls
- * platform_early_add_device() on the underlying platform_device.
- * Returns 0 by default.
- */
-static int __init omap_early_device_register(struct platform_device *pdev)
-{
-	struct platform_device *devices[1];
-
-	devices[0] = pdev;
-	early_platform_add_devices(devices, 1);
-	return 0;
-}
-
-#ifdef CONFIG_PM_RUNTIME
-static int _od_runtime_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int ret;
-
-	ret = pm_generic_runtime_suspend(dev);
-
-	if (!ret)
-		omap_device_idle(pdev);
-
-	return ret;
-}
-
-static int _od_runtime_idle(struct device *dev)
-{
-	return pm_generic_runtime_idle(dev);
-}
-
-static int _od_runtime_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	omap_device_enable(pdev);
-
-	return pm_generic_runtime_resume(dev);
-}
-#endif
-
-#ifdef CONFIG_SUSPEND
-static int _od_suspend_noirq(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-	int ret;
-
-	/* Don't attempt late suspend on a driver that is not bound */
-	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER)
-		return 0;
-
-	ret = pm_generic_suspend_noirq(dev);
-
-	if (!ret && !pm_runtime_status_suspended(dev)) {
-		if (pm_generic_runtime_suspend(dev) == 0) {
-			if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
-				omap_device_idle(pdev);
-			od->flags |= OMAP_DEVICE_SUSPENDED;
-		}
-	}
-
-	return ret;
-}
-
-static int _od_resume_noirq(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-
-	if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
-	    !pm_runtime_status_suspended(dev)) {
-		od->flags &= ~OMAP_DEVICE_SUSPENDED;
-		if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
-			omap_device_enable(pdev);
-		pm_generic_runtime_resume(dev);
-	}
-
-	return pm_generic_resume_noirq(dev);
-}
-#else
-#define _od_suspend_noirq NULL
-#define _od_resume_noirq NULL
-#endif
-
-struct dev_pm_domain omap_device_pm_domain = {
-	.ops = {
-		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
-				   _od_runtime_idle)
-		USE_PLATFORM_PM_SLEEP_OPS
-		.suspend_noirq = _od_suspend_noirq,
-		.resume_noirq = _od_resume_noirq,
-	}
-};
-
-/**
- * omap_device_register - register an omap_device with one omap_hwmod
- * @od: struct omap_device * to register
- *
- * Register the omap_device structure.  This currently just calls
- * platform_device_register() on the underlying platform_device.
- * Returns the return value of platform_device_register().
- */
-int omap_device_register(struct platform_device *pdev)
-{
-	pr_debug("omap_device: %s: registering\n", pdev->name);
-
-	pdev->dev.pm_domain = &omap_device_pm_domain;
-	return platform_device_add(pdev);
-}
-
-
-/* Public functions for use by device drivers through struct platform_data */
-
-/**
- * omap_device_enable - fully activate an omap_device
- * @od: struct omap_device * to activate
- *
- * Do whatever is necessary for the hwmods underlying omap_device @od
- * to be accessible and ready to operate.  This generally involves
- * enabling clocks, setting SYSCONFIG registers; and in the future may
- * involve remuxing pins.  Device drivers should call this function
- * (through platform_data function pointers) where they would normally
- * enable clocks, etc.  Returns -EINVAL if called when the omap_device
- * is already enabled, or passes along the return value of
- * _omap_device_activate().
- */
-int omap_device_enable(struct platform_device *pdev)
-{
-	int ret;
-	struct omap_device *od;
-
-	od = to_omap_device(pdev);
-
-	if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
-		dev_warn(&pdev->dev,
-			 "omap_device: %s() called from invalid state %d\n",
-			 __func__, od->_state);
-		return -EINVAL;
-	}
-
-	/* Enable everything if we're enabling this device from scratch */
-	if (od->_state == OMAP_DEVICE_STATE_UNKNOWN)
-		od->pm_lat_level = od->pm_lats_cnt;
-
-	ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
-
-	od->dev_wakeup_lat = 0;
-	od->_dev_wakeup_lat_limit = UINT_MAX;
-	od->_state = OMAP_DEVICE_STATE_ENABLED;
-
-	return ret;
-}
-
-/**
- * omap_device_idle - idle an omap_device
- * @od: struct omap_device * to idle
- *
- * Idle omap_device @od by calling as many .deactivate_func() entries
- * in the omap_device's pm_lats table as is possible without exceeding
- * the device's maximum wakeup latency limit, pm_lat_limit.  Device
- * drivers should call this function (through platform_data function
- * pointers) where they would normally disable clocks after operations
- * complete, etc..  Returns -EINVAL if the omap_device is not
- * currently enabled, or passes along the return value of
- * _omap_device_deactivate().
- */
-int omap_device_idle(struct platform_device *pdev)
-{
-	int ret;
-	struct omap_device *od;
-
-	od = to_omap_device(pdev);
-
-	if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
-		dev_warn(&pdev->dev,
-			 "omap_device: %s() called from invalid state %d\n",
-			 __func__, od->_state);
-		return -EINVAL;
-	}
-
-	ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
-
-	od->_state = OMAP_DEVICE_STATE_IDLE;
-
-	return ret;
-}
-
-/**
- * omap_device_shutdown - shut down an omap_device
- * @od: struct omap_device * to shut down
- *
- * Shut down omap_device @od by calling all .deactivate_func() entries
- * in the omap_device's pm_lats table and then shutting down all of
- * the underlying omap_hwmods.  Used when a device is being "removed"
- * or a device driver is being unloaded.  Returns -EINVAL if the
- * omap_device is not currently enabled or idle, or passes along the
- * return value of _omap_device_deactivate().
- */
-int omap_device_shutdown(struct platform_device *pdev)
-{
-	int ret, i;
-	struct omap_device *od;
-
-	od = to_omap_device(pdev);
-
-	if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
-	    od->_state != OMAP_DEVICE_STATE_IDLE) {
-		dev_warn(&pdev->dev,
-			 "omap_device: %s() called from invalid state %d\n",
-			 __func__, od->_state);
-		return -EINVAL;
-	}
-
-	ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_shutdown(od->hwmods[i]);
-
-	od->_state = OMAP_DEVICE_STATE_SHUTDOWN;
-
-	return ret;
-}
-
-/**
- * omap_device_assert_hardreset - set a device's hardreset line
- * @pdev: struct platform_device * to reset
- * @name: const char * name of the reset line
- *
- * Set the hardreset line identified by @name on the IP blocks
- * associated with the hwmods backing the platform_device @pdev.  All
- * of the hwmods associated with @pdev must have the same hardreset
- * line linked to them for this to work.  Passes along the return value
- * of omap_hwmod_assert_hardreset() in the event of any failure, or
- * returns 0 upon success.
- */
-int omap_device_assert_hardreset(struct platform_device *pdev, const char *name)
-{
-	struct omap_device *od = to_omap_device(pdev);
-	int ret = 0;
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++) {
-		ret = omap_hwmod_assert_hardreset(od->hwmods[i], name);
-		if (ret)
-			break;
-	}
-
-	return ret;
-}
-
-/**
- * omap_device_deassert_hardreset - release a device's hardreset line
- * @pdev: struct platform_device * to reset
- * @name: const char * name of the reset line
- *
- * Release the hardreset line identified by @name on the IP blocks
- * associated with the hwmods backing the platform_device @pdev.  All
- * of the hwmods associated with @pdev must have the same hardreset
- * line linked to them for this to work.  Passes along the return
- * value of omap_hwmod_deassert_hardreset() in the event of any
- * failure, or returns 0 upon success.
- */
-int omap_device_deassert_hardreset(struct platform_device *pdev,
-				   const char *name)
-{
-	struct omap_device *od = to_omap_device(pdev);
-	int ret = 0;
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++) {
-		ret = omap_hwmod_deassert_hardreset(od->hwmods[i], name);
-		if (ret)
-			break;
-	}
-
-	return ret;
-}
-
-/**
- * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
- * @od: struct omap_device *
- *
- * When a device's maximum wakeup latency limit changes, call some of
- * the .activate_func or .deactivate_func function pointers in the
- * omap_device's pm_lats array to ensure that the device's maximum
- * wakeup latency is less than or equal to the new latency limit.
- * Intended to be called by OMAP PM code whenever a device's maximum
- * wakeup latency limit changes (e.g., via
- * omap_pm_set_dev_wakeup_lat()).  Returns 0 if nothing needs to be
- * done (e.g., if the omap_device is not currently idle, or if the
- * wakeup latency is already current with the new limit) or passes
- * along the return value of _omap_device_deactivate() or
- * _omap_device_activate().
- */
-int omap_device_align_pm_lat(struct platform_device *pdev,
-			     u32 new_wakeup_lat_limit)
-{
-	int ret = -EINVAL;
-	struct omap_device *od;
-
-	od = to_omap_device(pdev);
-
-	if (new_wakeup_lat_limit == od->dev_wakeup_lat)
-		return 0;
-
-	od->_dev_wakeup_lat_limit = new_wakeup_lat_limit;
-
-	if (od->_state != OMAP_DEVICE_STATE_IDLE)
-		return 0;
-	else if (new_wakeup_lat_limit > od->dev_wakeup_lat)
-		ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
-	else if (new_wakeup_lat_limit < od->dev_wakeup_lat)
-		ret = _omap_device_activate(od, USE_WAKEUP_LAT);
-
-	return ret;
-}
-
-/**
- * omap_device_get_pwrdm - return the powerdomain * associated with @od
- * @od: struct omap_device *
- *
- * Return the powerdomain associated with the first underlying
- * omap_hwmod for this omap_device.  Intended for use by core OMAP PM
- * code.  Returns NULL on error or a struct powerdomain * upon
- * success.
- */
-struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
-{
-	/*
-	 * XXX Assumes that all omap_hwmod powerdomains are identical.
-	 * This may not necessarily be true.  There should be a sanity
-	 * check in here to WARN() if any difference appears.
-	 */
-	if (!od->hwmods_cnt)
-		return NULL;
-
-	return omap_hwmod_get_pwrdm(od->hwmods[0]);
-}
-
-/**
- * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base
- * @od: struct omap_device *
- *
- * Return the MPU's virtual address for the base of the hwmod, from
- * the ioremap() that the hwmod code does.  Only valid if there is one
- * hwmod associated with this device.  Returns NULL if there are zero
- * or more than one hwmods associated with this omap_device;
- * otherwise, passes along the return value from
- * omap_hwmod_get_mpu_rt_va().
- */
-void __iomem *omap_device_get_rt_va(struct omap_device *od)
-{
-	if (od->hwmods_cnt != 1)
-		return NULL;
-
-	return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
-}
-
-/**
- * omap_device_get_by_hwmod_name() - convert a hwmod name to
- * device pointer.
- * @oh_name: name of the hwmod device
- *
- * Returns back a struct device * pointer associated with a hwmod
- * device represented by a hwmod_name
- */
-struct device *omap_device_get_by_hwmod_name(const char *oh_name)
-{
-	struct omap_hwmod *oh;
-
-	if (!oh_name) {
-		WARN(1, "%s: no hwmod name!\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (IS_ERR_OR_NULL(oh)) {
-		WARN(1, "%s: no hwmod for %s\n", __func__,
-			oh_name);
-		return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
-	}
-	if (IS_ERR_OR_NULL(oh->od)) {
-		WARN(1, "%s: no omap_device for %s\n", __func__,
-			oh_name);
-		return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
-	}
-
-	if (IS_ERR_OR_NULL(oh->od->pdev))
-		return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
-
-	return &oh->od->pdev->dev;
-}
-EXPORT_SYMBOL(omap_device_get_by_hwmod_name);
-
-/*
- * Public functions intended for use in omap_device_pm_latency
- * .activate_func and .deactivate_func function pointers
- */
-
-/**
- * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods
- * @od: struct omap_device *od
- *
- * Enable all underlying hwmods.  Returns 0.
- */
-int omap_device_enable_hwmods(struct omap_device *od)
-{
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_enable(od->hwmods[i]);
-
-	/* XXX pass along return value here? */
-	return 0;
-}
-
-/**
- * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
- * @od: struct omap_device *od
- *
- * Idle all underlying hwmods.  Returns 0.
- */
-int omap_device_idle_hwmods(struct omap_device *od)
-{
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_idle(od->hwmods[i]);
-
-	/* XXX pass along return value here? */
-	return 0;
-}
-
-/**
- * omap_device_disable_clocks - disable all main and interface clocks
- * @od: struct omap_device *od
- *
- * Disable the main functional clock and interface clock for all of the
- * omap_hwmods associated with the omap_device.  Returns 0.
- */
-int omap_device_disable_clocks(struct omap_device *od)
-{
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_disable_clocks(od->hwmods[i]);
-
-	/* XXX pass along return value here? */
-	return 0;
-}
-
-/**
- * omap_device_enable_clocks - enable all main and interface clocks
- * @od: struct omap_device *od
- *
- * Enable the main functional clock and interface clock for all of the
- * omap_hwmods associated with the omap_device.  Returns 0.
- */
-int omap_device_enable_clocks(struct omap_device *od)
-{
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_enable_clocks(od->hwmods[i]);
-
-	/* XXX pass along return value here? */
-	return 0;
-}
-
-static struct notifier_block platform_nb = {
-	.notifier_call = _omap_device_notifier_call,
-};
-
-static int __init omap_device_init(void)
-{
-	bus_register_notifier(&platform_bus_type, &platform_nb);
-	return 0;
-}
-core_initcall(omap_device_init);
-
-/**
- * omap_device_late_idle - idle devices without drivers
- * @dev: struct device * associated with omap_device
- * @data: unused
- *
- * Check the driver bound status of this device, and idle it
- * if there is no driver attached.
- */
-static int __init omap_device_late_idle(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-
-	if (!od)
-		return 0;
-
-	/*
-	 * If omap_device state is enabled, but has no driver bound,
-	 * idle it.
-	 */
-	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
-		if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
-			dev_warn(dev, "%s: enabled but no driver.  Idling\n",
-				 __func__);
-			omap_device_idle(pdev);
-		}
-	}
-
-	return 0;
-}
-
-static int __init omap_device_late_init(void)
-{
-	bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
-	return 0;
-}
-late_initcall(omap_device_late_init);
-- 
cgit v1.2.3


From 2a296c8f89bc6aaf91b255c7d631fcbbfaf840ec Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 2 Oct 2012 17:41:35 -0700
Subject: ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2

Let's make omap_hwmod local to mach-omap2 for
ARM common zImage support.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clockdomain.h                  |   2 +-
 arch/arm/mach-omap2/devices.c                      |   5 +-
 arch/arm/mach-omap2/display.c                      |   2 +-
 arch/arm/mach-omap2/dma.c                          |   2 +-
 arch/arm/mach-omap2/drm.c                          |   2 +-
 arch/arm/mach-omap2/gpio.c                         |   2 +-
 arch/arm/mach-omap2/hdq1w.c                        |   2 +-
 arch/arm/mach-omap2/hdq1w.h                        |   2 +-
 arch/arm/mach-omap2/hwspinlock.c                   |   2 +-
 arch/arm/mach-omap2/i2c.c                          |   2 +-
 arch/arm/mach-omap2/io.c                           |   2 +-
 arch/arm/mach-omap2/msdi.c                         |   2 +-
 arch/arm/mach-omap2/mux.c                          |   2 +-
 arch/arm/mach-omap2/omap_device.c                  |   2 +-
 arch/arm/mach-omap2/omap_device.h                  |   2 +-
 arch/arm/mach-omap2/omap_hwmod.c                   |   2 +-
 arch/arm/mach-omap2/omap_hwmod.h                   | 676 +++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_2420_data.c         |   3 +-
 arch/arm/mach-omap2/omap_hwmod_2430_data.c         |   3 +-
 .../omap_hwmod_2xxx_3xxx_interconnect_data.c       |   3 +-
 .../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c |   5 +-
 .../mach-omap2/omap_hwmod_2xxx_interconnect_data.c |   3 +-
 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c |   3 +-
 arch/arm/mach-omap2/omap_hwmod_33xx_data.c         |   2 +-
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c         |   3 +-
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c         |   3 +-
 arch/arm/mach-omap2/omap_hwmod_common_data.c       |   2 +-
 arch/arm/mach-omap2/omap_hwmod_common_data.h       |   2 +-
 arch/arm/mach-omap2/omap_opp_data.h                |   2 +-
 arch/arm/mach-omap2/pmu.c                          |   2 +-
 arch/arm/mach-omap2/serial.c                       |   6 +-
 arch/arm/mach-omap2/timer.c                        |   2 +-
 arch/arm/mach-omap2/wd_timer.c                     |   2 +-
 arch/arm/mach-omap2/wd_timer.h                     |   2 +-
 arch/arm/plat-omap/include/plat/omap_hwmod.h       | 676 ---------------------
 35 files changed, 723 insertions(+), 712 deletions(-)
 create mode 100644 arch/arm/mach-omap2/omap_hwmod.h
 delete mode 100644 arch/arm/plat-omap/include/plat/omap_hwmod.h

(limited to 'arch/arm/mach-omap2/display.c')

diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 629576be7444..a868c0296265 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -19,7 +19,7 @@
 
 #include "powerdomain.h"
 #include <plat/clock.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include <plat/cpu.h>
 
 /*
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 48c0def2dbc2..86a5e13c9f59 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -23,9 +23,10 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include "iomap.h"
 #include <plat-omap/dma-omap.h>
-#include <plat/omap_hwmod.h>
+
+#include "iomap.h"
+#include "omap_hwmod.h"
 #include "omap_device.h"
 #include "omap4-keypad.h"
 
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 55661d00423c..815af41c4375 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -25,7 +25,7 @@
 #include <linux/delay.h>
 
 #include <video/omapdss.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "omap_device.h"
 #include <plat/omap-pm.h>
 #include "common.h"
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 7ddc6c90ed71..bc9a4e941e59 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -28,9 +28,9 @@
 #include <linux/init.h>
 #include <linux/device.h>
 
-#include <plat/omap_hwmod.h>
 #include <plat-omap/dma-omap.h>
 
+#include "omap_hwmod.h"
 #include "omap_device.h"
 
 #define OMAP2_DMA_STRIDE	0x60
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 67991ea53ce7..6282cc826613 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -25,7 +25,7 @@
 #include <linux/dma-mapping.h>
 
 #include "omap_device.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 
 #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
 
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 2bd24671bcf6..80b1e1a05ce2 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -23,7 +23,7 @@
 #include <linux/of.h>
 #include <linux/platform_data/gpio-omap.h>
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "omap_device.h"
 #include <plat/omap-pm.h>
 
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index a533ce33d112..3da8900598c8 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -27,7 +27,7 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "omap_device.h"
 #include "hdq1w.h"
 
diff --git a/arch/arm/mach-omap2/hdq1w.h b/arch/arm/mach-omap2/hdq1w.h
index 0c1efc846d8d..c7e08d2a7a46 100644
--- a/arch/arm/mach-omap2/hdq1w.h
+++ b/arch/arm/mach-omap2/hdq1w.h
@@ -21,7 +21,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H
 #define ARCH_ARM_MACH_OMAP2_HDQ1W_H
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 
 /*
  * XXX A future cleanup patch should modify
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 58565214b428..1df9b5feda16 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -21,7 +21,7 @@
 #include <linux/err.h>
 #include <linux/hwspinlock.h>
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "omap_device.h"
 
 static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 84b0d9f25a7b..8b3993724a1b 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -20,7 +20,7 @@
  */
 
 #include "common.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "omap_device.h"
 
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 0bc8f66c4b72..60dede839a35 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -27,7 +27,7 @@
 
 #include <plat/serial.h>
 #include <plat/omap-pm.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include <plat/multi.h>
 #include <plat-omap/dma-omap.h>
 
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index 46bf98a99180..627e97e30743 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -25,9 +25,9 @@
 #include <linux/err.h>
 #include <linux/platform_data/gpio-omap.h>
 
-#include <plat/omap_hwmod.h>
 #include "common.h"
 #include "control.h"
+#include "omap_hwmod.h"
 #include "omap_device.h"
 #include "mux.h"
 #include "mmc.h"
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 701e17cba468..635d5ef9551c 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -36,7 +36,7 @@
 #include <linux/interrupt.h>
 
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 
 #include "control.h"
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index e5fbcb53c7cc..2e6d33730b25 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -90,7 +90,7 @@
 #include <linux/notifier.h>
 
 #include "omap_device.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include <plat/clock.h>
 
 /* These parameters are passed to _omap_device_{de,}activate() */
diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h
index 106f50665804..0933c599bf89 100644
--- a/arch/arm/mach-omap2/omap_device.h
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -34,7 +34,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 
 extern struct dev_pm_domain omap_device_pm_domain;
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b969ab1d258b..3dc482a1a75f 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -140,7 +140,7 @@
 #include <linux/bootmem.h>
 
 #include <plat/clock.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include <plat/prcm.h>
 
 #include "soc.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
new file mode 100644
index 000000000000..b3349f7b1a2c
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -0,0 +1,676 @@
+/*
+ * omap_hwmod macros, structures
+ *
+ * Copyright (C) 2009-2011 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * Created in collaboration with (alphabetical order): Benoît Cousson,
+ * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
+ * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These headers and macros are used to define OMAP on-chip module
+ * data and their integration with other OMAP modules and Linux.
+ * Copious documentation and references can also be found in the
+ * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
+ * writing).
+ *
+ * To do:
+ * - add interconnect error log structures
+ * - add pinmuxing
+ * - init_conn_id_bit (CONNID_BIT_VECTOR)
+ * - implement default hwmod SMS/SDRC flags?
+ * - move Linux-specific data ("non-ROM data") out
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+#include <plat/cpu.h>
+
+struct omap_device;
+
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
+ * with the original PRCM protocol defined for OMAP2420
+ */
+#define SYSC_TYPE1_MIDLEMODE_SHIFT	12
+#define SYSC_TYPE1_MIDLEMODE_MASK	(0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT)
+#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT	8
+#define SYSC_TYPE1_CLOCKACTIVITY_MASK	(0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT)
+#define SYSC_TYPE1_SIDLEMODE_SHIFT	3
+#define SYSC_TYPE1_SIDLEMODE_MASK	(0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT)
+#define SYSC_TYPE1_ENAWAKEUP_SHIFT	2
+#define SYSC_TYPE1_ENAWAKEUP_MASK	(1 << SYSC_TYPE1_ENAWAKEUP_SHIFT)
+#define SYSC_TYPE1_SOFTRESET_SHIFT	1
+#define SYSC_TYPE1_SOFTRESET_MASK	(1 << SYSC_TYPE1_SOFTRESET_SHIFT)
+#define SYSC_TYPE1_AUTOIDLE_SHIFT	0
+#define SYSC_TYPE1_AUTOIDLE_MASK	(1 << SYSC_TYPE1_AUTOIDLE_SHIFT)
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
+ * with the new PRCM protocol defined for new OMAP4 IPs.
+ */
+#define SYSC_TYPE2_SOFTRESET_SHIFT	0
+#define SYSC_TYPE2_SOFTRESET_MASK	(1 << SYSC_TYPE2_SOFTRESET_SHIFT)
+#define SYSC_TYPE2_SIDLEMODE_SHIFT	2
+#define SYSC_TYPE2_SIDLEMODE_MASK	(0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
+#define SYSC_TYPE2_MIDLEMODE_SHIFT	4
+#define SYSC_TYPE2_MIDLEMODE_MASK	(0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
+#define SYSC_TYPE2_DMADISABLE_SHIFT	16
+#define SYSC_TYPE2_DMADISABLE_MASK	(0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE3.
+ * This is applicable for some IPs present in AM33XX
+ */
+#define SYSC_TYPE3_SIDLEMODE_SHIFT	0
+#define SYSC_TYPE3_SIDLEMODE_MASK	(0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
+#define SYSC_TYPE3_MIDLEMODE_SHIFT	2
+#define SYSC_TYPE3_MIDLEMODE_MASK	(0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
+
+/* OCP SYSSTATUS bit shifts/masks */
+#define SYSS_RESETDONE_SHIFT		0
+#define SYSS_RESETDONE_MASK		(1 << SYSS_RESETDONE_SHIFT)
+
+/* Master standby/slave idle mode flags */
+#define HWMOD_IDLEMODE_FORCE		(1 << 0)
+#define HWMOD_IDLEMODE_NO		(1 << 1)
+#define HWMOD_IDLEMODE_SMART		(1 << 2)
+#define HWMOD_IDLEMODE_SMART_WKUP	(1 << 3)
+
+/* modulemode control type (SW or HW) */
+#define MODULEMODE_HWCTRL		1
+#define MODULEMODE_SWCTRL		2
+
+
+/**
+ * struct omap_hwmod_mux_info - hwmod specific mux configuration
+ * @pads:              array of omap_device_pad entries
+ * @nr_pads:           number of omap_device_pad entries
+ *
+ * Note that this is currently built during init as needed.
+ */
+struct omap_hwmod_mux_info {
+	int				nr_pads;
+	struct omap_device_pad		*pads;
+	int				nr_pads_dynamic;
+	struct omap_device_pad		**pads_dynamic;
+	int				*irqs;
+	bool				enabled;
+};
+
+/**
+ * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
+ * @name: name of the IRQ channel (module local name)
+ * @irq: IRQ channel ID (should be non-negative except -1 = terminator)
+ *
+ * @name should be something short, e.g., "tx" or "rx".  It is for use
+ * by platform_get_resource_byname().  It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_irq_info {
+	const char	*name;
+	s16		irq;
+};
+
+/**
+ * struct omap_hwmod_dma_info - DMA channels used by the hwmod
+ * @name: name of the DMA channel (module local name)
+ * @dma_req: DMA request ID (should be non-negative except -1 = terminator)
+ *
+ * @name should be something short, e.g., "tx" or "rx".  It is for use
+ * by platform_get_resource_byname().  It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_dma_info {
+	const char	*name;
+	s16		dma_req;
+};
+
+/**
+ * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
+ * @name: name of the reset line (module local name)
+ * @rst_shift: Offset of the reset bit
+ * @st_shift: Offset of the reset status bit (OMAP2/3 only)
+ *
+ * @name should be something short, e.g., "cpu0" or "rst". It is defined
+ * locally to the hwmod.
+ */
+struct omap_hwmod_rst_info {
+	const char	*name;
+	u8		rst_shift;
+	u8		st_shift;
+};
+
+/**
+ * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
+ * @role: "sys", "32k", "tv", etc -- for use in clk_get()
+ * @clk: opt clock: OMAP clock name
+ * @_clk: pointer to the struct clk (filled in at runtime)
+ *
+ * The module's interface clock and main functional clock should not
+ * be added as optional clocks.
+ */
+struct omap_hwmod_opt_clk {
+	const char	*role;
+	const char	*clk;
+	struct clk	*_clk;
+};
+
+
+/* omap_hwmod_omap2_firewall.flags bits */
+#define OMAP_FIREWALL_L3		(1 << 0)
+#define OMAP_FIREWALL_L4		(1 << 1)
+
+/**
+ * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
+ * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
+ * @l4_fw_region: L4 firewall region ID
+ * @l4_prot_group: L4 protection group ID
+ * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
+ */
+struct omap_hwmod_omap2_firewall {
+	u8 l3_perm_bit;
+	u8 l4_fw_region;
+	u8 l4_prot_group;
+	u8 flags;
+};
+
+
+/*
+ * omap_hwmod_addr_space.flags bits
+ *
+ * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
+ * ADDR_TYPE_RT: Address space contains module register target data.
+ */
+#define ADDR_MAP_ON_INIT	(1 << 0)	/* XXX does not belong */
+#define ADDR_TYPE_RT		(1 << 1)
+
+/**
+ * struct omap_hwmod_addr_space - address space handled by the hwmod
+ * @name: name of the address space
+ * @pa_start: starting physical address
+ * @pa_end: ending physical address
+ * @flags: (see omap_hwmod_addr_space.flags macros above)
+ *
+ * Address space doesn't necessarily follow physical interconnect
+ * structure.  GPMC is one example.
+ */
+struct omap_hwmod_addr_space {
+	const char *name;
+	u32 pa_start;
+	u32 pa_end;
+	u8 flags;
+};
+
+
+/*
+ * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
+ * interface to interact with the hwmod.  Used to add sleep dependencies
+ * when the module is enabled or disabled.
+ */
+#define OCP_USER_MPU			(1 << 0)
+#define OCP_USER_SDMA			(1 << 1)
+#define OCP_USER_DSP			(1 << 2)
+#define OCP_USER_IVA			(1 << 3)
+
+/* omap_hwmod_ocp_if.flags bits */
+#define OCPIF_SWSUP_IDLE		(1 << 0)
+#define OCPIF_CAN_BURST			(1 << 1)
+
+/* omap_hwmod_ocp_if._int_flags possibilities */
+#define _OCPIF_INT_FLAGS_REGISTERED	(1 << 0)
+
+
+/**
+ * struct omap_hwmod_ocp_if - OCP interface data
+ * @master: struct omap_hwmod that initiates OCP transactions on this link
+ * @slave: struct omap_hwmod that responds to OCP transactions on this link
+ * @addr: address space associated with this link
+ * @clk: interface clock: OMAP clock name
+ * @_clk: pointer to the interface struct clk (filled in at runtime)
+ * @fw: interface firewall data
+ * @width: OCP data width
+ * @user: initiators using this interface (see OCP_USER_* macros above)
+ * @flags: OCP interface flags (see OCPIF_* macros above)
+ * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above)
+ *
+ * It may also be useful to add a tag_cnt field for OCP2.x devices.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod_ocp_if {
+	struct omap_hwmod		*master;
+	struct omap_hwmod		*slave;
+	struct omap_hwmod_addr_space	*addr;
+	const char			*clk;
+	struct clk			*_clk;
+	union {
+		struct omap_hwmod_omap2_firewall omap2;
+	}				fw;
+	u8				width;
+	u8				user;
+	u8				flags;
+	u8				_int_flags;
+};
+
+
+/* Macros for use in struct omap_hwmod_sysconfig */
+
+/* Flags for use in omap_hwmod_sysconfig.idlemodes */
+#define MASTER_STANDBY_SHIFT	4
+#define SLAVE_IDLE_SHIFT	0
+#define SIDLE_FORCE		(HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
+#define SIDLE_NO		(HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART		(HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART_WKUP	(HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
+#define MSTANDBY_FORCE		(HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_NO		(HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_SMART		(HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_SMART_WKUP	(HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT)
+
+/* omap_hwmod_sysconfig.sysc_flags capability flags */
+#define SYSC_HAS_AUTOIDLE	(1 << 0)
+#define SYSC_HAS_SOFTRESET	(1 << 1)
+#define SYSC_HAS_ENAWAKEUP	(1 << 2)
+#define SYSC_HAS_EMUFREE	(1 << 3)
+#define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
+#define SYSC_HAS_SIDLEMODE	(1 << 5)
+#define SYSC_HAS_MIDLEMODE	(1 << 6)
+#define SYSS_HAS_RESET_STATUS	(1 << 7)
+#define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
+#define SYSC_HAS_RESET_STATUS	(1 << 9)
+#define SYSC_HAS_DMADISABLE	(1 << 10)
+
+/* omap_hwmod_sysconfig.clockact flags */
+#define CLOCKACT_TEST_BOTH	0x0
+#define CLOCKACT_TEST_MAIN	0x1
+#define CLOCKACT_TEST_ICLK	0x2
+#define CLOCKACT_TEST_NONE	0x3
+
+/**
+ * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets.
+ * @midle_shift: Offset of the midle bit
+ * @clkact_shift: Offset of the clockactivity bit
+ * @sidle_shift: Offset of the sidle bit
+ * @enwkup_shift: Offset of the enawakeup bit
+ * @srst_shift: Offset of the softreset bit
+ * @autoidle_shift: Offset of the autoidle bit
+ * @dmadisable_shift: Offset of the dmadisable bit
+ */
+struct omap_hwmod_sysc_fields {
+	u8 midle_shift;
+	u8 clkact_shift;
+	u8 sidle_shift;
+	u8 enwkup_shift;
+	u8 srst_shift;
+	u8 autoidle_shift;
+	u8 dmadisable_shift;
+};
+
+/**
+ * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
+ * @rev_offs: IP block revision register offset (from module base addr)
+ * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
+ * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @srst_udelay: Delay needed after doing a softreset in usecs
+ * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
+ * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
+ * @clockact: the default value of the module CLOCKACTIVITY bits
+ *
+ * @clockact describes to the module which clocks are likely to be
+ * disabled when the PRCM issues its idle request to the module.  Some
+ * modules have separate clockdomains for the interface clock and main
+ * functional clock, and can check whether they should acknowledge the
+ * idle request based on the internal module functionality that has
+ * been associated with the clocks marked in @clockact.  This field is
+ * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
+ *
+ * @sysc_fields: structure containing the offset positions of various bits in
+ * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
+ * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
+ * whether the device ip is compliant with the original PRCM protocol
+ * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
+ * If the device follows a different scheme for the sysconfig register ,
+ * then this field has to be populated with the correct offset structure.
+ */
+struct omap_hwmod_class_sysconfig {
+	u32 rev_offs;
+	u32 sysc_offs;
+	u32 syss_offs;
+	u16 sysc_flags;
+	struct omap_hwmod_sysc_fields *sysc_fields;
+	u8 srst_udelay;
+	u8 idlemodes;
+	u8 clockact;
+};
+
+/**
+ * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM
+ * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
+ * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
+ * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
+ * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
+ * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
+ *
+ * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
+ * WKEN, GRPSEL registers.  In an ideal world, no extra information
+ * would be needed for IDLEST information, but alas, there are some
+ * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
+ * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
+ */
+struct omap_hwmod_omap2_prcm {
+	s16 module_offs;
+	u8 prcm_reg_id;
+	u8 module_bit;
+	u8 idlest_reg_id;
+	u8 idlest_idle_bit;
+	u8 idlest_stdby_bit;
+};
+
+/*
+ * Possible values for struct omap_hwmod_omap4_prcm.flags
+ *
+ * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
+ *     module-level context loss register associated with them; this
+ *     flag bit should be set in those cases
+ */
+#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT		(1 << 0)
+
+/**
+ * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
+ * @clkctrl_reg: PRCM address of the clock control register
+ * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
+ * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register
+ * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
+ * @submodule_wkdep_bit: bit shift of the WKDEP range
+ * @flags: PRCM register capabilities for this IP block
+ *
+ * If @lostcontext_mask is not defined, context loss check code uses
+ * whole register without masking. @lostcontext_mask should only be
+ * defined in cases where @context_offs register is shared by two or
+ * more hwmods.
+ */
+struct omap_hwmod_omap4_prcm {
+	u16		clkctrl_offs;
+	u16		rstctrl_offs;
+	u16		rstst_offs;
+	u16		context_offs;
+	u32		lostcontext_mask;
+	u8		submodule_wkdep_bit;
+	u8		modulemode;
+	u8		flags;
+};
+
+
+/*
+ * omap_hwmod.flags definitions
+ *
+ * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
+ *     of idle, rather than relying on module smart-idle
+ * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
+ *     of standby, rather than relying on module smart-standby
+ * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
+ *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
+ *     XXX Should be HWMOD_SETUP_NO_RESET
+ * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
+ *     controller, etc. XXX probably belongs outside the main hwmod file
+ *     XXX Should be HWMOD_SETUP_NO_IDLE
+ * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
+ *     when module is enabled, rather than the default, which is to
+ *     enable autoidle
+ * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
+ *     only for few initiator modules on OMAP2 & 3.
+ * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
+ *     This is needed for devices like DSS that require optional clocks enabled
+ *     in order to complete the reset. Optional clocks will be disabled
+ *     again after the reset.
+ * HWMOD_16BIT_REG: Module has 16bit registers
+ */
+#define HWMOD_SWSUP_SIDLE			(1 << 0)
+#define HWMOD_SWSUP_MSTANDBY			(1 << 1)
+#define HWMOD_INIT_NO_RESET			(1 << 2)
+#define HWMOD_INIT_NO_IDLE			(1 << 3)
+#define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
+#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
+#define HWMOD_NO_IDLEST				(1 << 6)
+#define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
+#define HWMOD_16BIT_REG				(1 << 8)
+
+/*
+ * omap_hwmod._int_flags definitions
+ * These are for internal use only and are managed by the omap_hwmod code.
+ *
+ * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
+ * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
+ * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
+ * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
+ *     causes the first call to _enable() to only update the pinmux
+ */
+#define _HWMOD_NO_MPU_PORT			(1 << 0)
+#define _HWMOD_WAKEUP_ENABLED			(1 << 1)
+#define _HWMOD_SYSCONFIG_LOADED			(1 << 2)
+#define _HWMOD_SKIP_ENABLE			(1 << 3)
+
+/*
+ * omap_hwmod._state definitions
+ *
+ * INITIALIZED: reset (optionally), initialized, enabled, disabled
+ *              (optionally)
+ *
+ *
+ */
+#define _HWMOD_STATE_UNKNOWN			0
+#define _HWMOD_STATE_REGISTERED			1
+#define _HWMOD_STATE_CLKS_INITED		2
+#define _HWMOD_STATE_INITIALIZED		3
+#define _HWMOD_STATE_ENABLED			4
+#define _HWMOD_STATE_IDLE			5
+#define _HWMOD_STATE_DISABLED			6
+
+/**
+ * struct omap_hwmod_class - the type of an IP block
+ * @name: name of the hwmod_class
+ * @sysc: device SYSCONFIG/SYSSTATUS register data
+ * @rev: revision of the IP class
+ * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
+ * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
+ *
+ * Represent the class of a OMAP hardware "modules" (e.g. timer,
+ * smartreflex, gpio, uart...)
+ *
+ * @pre_shutdown is a function that will be run immediately before
+ * hwmod clocks are disabled, etc.  It is intended for use for hwmods
+ * like the MPU watchdog, which cannot be disabled with the standard
+ * omap_hwmod_shutdown().  The function should return 0 upon success,
+ * or some negative error upon failure.  Returning an error will cause
+ * omap_hwmod_shutdown() to abort the device shutdown and return an
+ * error.
+ *
+ * If @reset is defined, then the function it points to will be
+ * executed in place of the standard hwmod _reset() code in
+ * mach-omap2/omap_hwmod.c.  This is needed for IP blocks which have
+ * unusual reset sequences - usually processor IP blocks like the IVA.
+ */
+struct omap_hwmod_class {
+	const char				*name;
+	struct omap_hwmod_class_sysconfig	*sysc;
+	u32					rev;
+	int					(*pre_shutdown)(struct omap_hwmod *oh);
+	int					(*reset)(struct omap_hwmod *oh);
+};
+
+/**
+ * struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs
+ * @ocp_if: OCP interface structure record pointer
+ * @node: list_head pointing to next struct omap_hwmod_link in a list
+ */
+struct omap_hwmod_link {
+	struct omap_hwmod_ocp_if	*ocp_if;
+	struct list_head		node;
+};
+
+/**
+ * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
+ * @name: name of the hwmod
+ * @class: struct omap_hwmod_class * to the class of this hwmod
+ * @od: struct omap_device currently associated with this hwmod (internal use)
+ * @mpu_irqs: ptr to an array of MPU IRQs
+ * @sdma_reqs: ptr to an array of System DMA request IDs
+ * @prcm: PRCM data pertaining to this hwmod
+ * @main_clk: main clock: OMAP clock name
+ * @_clk: pointer to the main struct clk (filled in at runtime)
+ * @opt_clks: other device clocks that drivers can request (0..*)
+ * @voltdm: pointer to voltage domain (filled in at runtime)
+ * @dev_attr: arbitrary device attributes that can be passed to the driver
+ * @_sysc_cache: internal-use hwmod flags
+ * @_mpu_rt_va: cached register target start address (internal use)
+ * @_mpu_port: cached MPU register target slave (internal use)
+ * @opt_clks_cnt: number of @opt_clks
+ * @master_cnt: number of @master entries
+ * @slaves_cnt: number of @slave entries
+ * @response_lat: device OCP response latency (in interface clock cycles)
+ * @_int_flags: internal-use hwmod flags
+ * @_state: internal-use hwmod state
+ * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
+ * @flags: hwmod flags (documented below)
+ * @_lock: spinlock serializing operations on this hwmod
+ * @node: list node for hwmod list (internal use)
+ *
+ * @main_clk refers to this module's "main clock," which for our
+ * purposes is defined as "the functional clock needed for register
+ * accesses to complete."  Modules may not have a main clock if the
+ * interface clock also serves as a main clock.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ *
+ * @masters and @slaves are now deprecated.
+ */
+struct omap_hwmod {
+	const char			*name;
+	struct omap_hwmod_class		*class;
+	struct omap_device		*od;
+	struct omap_hwmod_mux_info	*mux;
+	struct omap_hwmod_irq_info	*mpu_irqs;
+	struct omap_hwmod_dma_info	*sdma_reqs;
+	struct omap_hwmod_rst_info	*rst_lines;
+	union {
+		struct omap_hwmod_omap2_prcm omap2;
+		struct omap_hwmod_omap4_prcm omap4;
+	}				prcm;
+	const char			*main_clk;
+	struct clk			*_clk;
+	struct omap_hwmod_opt_clk	*opt_clks;
+	char				*clkdm_name;
+	struct clockdomain		*clkdm;
+	struct list_head		master_ports; /* connect to *_IA */
+	struct list_head		slave_ports; /* connect to *_TA */
+	void				*dev_attr;
+	u32				_sysc_cache;
+	void __iomem			*_mpu_rt_va;
+	spinlock_t			_lock;
+	struct list_head		node;
+	struct omap_hwmod_ocp_if	*_mpu_port;
+	u16				flags;
+	u8				response_lat;
+	u8				rst_lines_cnt;
+	u8				opt_clks_cnt;
+	u8				masters_cnt;
+	u8				slaves_cnt;
+	u8				hwmods_cnt;
+	u8				_int_flags;
+	u8				_state;
+	u8				_postsetup_state;
+};
+
+struct omap_hwmod *omap_hwmod_lookup(const char *name);
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
+			void *data);
+
+int __init omap_hwmod_setup_one(const char *name);
+
+int omap_hwmod_enable(struct omap_hwmod *oh);
+int omap_hwmod_idle(struct omap_hwmod *oh);
+int omap_hwmod_shutdown(struct omap_hwmod *oh);
+
+int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
+
+int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
+int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
+
+int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
+int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
+
+int omap_hwmod_reset(struct omap_hwmod *oh);
+void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
+
+void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
+u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
+int omap_hwmod_softreset(struct omap_hwmod *oh);
+
+int omap_hwmod_count_resources(struct omap_hwmod *oh);
+int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
+int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
+				   const char *name, struct resource *res);
+
+struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
+void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
+
+int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh);
+int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh);
+
+int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
+int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
+
+int omap_hwmod_for_each_by_class(const char *classname,
+				 int (*fn)(struct omap_hwmod *oh,
+					   void *user),
+				 void *user);
+
+int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
+int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
+
+int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
+
+int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
+
+extern void __init omap_hwmod_init(void);
+
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
+
+/*
+ * Chip variant-specific hwmod init routines - XXX should be converted
+ * to use initcalls once the initial boot ordering is straightened out
+ */
+extern int omap2420_hwmod_init(void);
+extern int omap2430_hwmod_init(void);
+extern int omap3xxx_hwmod_init(void);
+extern int omap44xx_hwmod_init(void);
+extern int am33xx_hwmod_init(void);
+
+extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
+
+#endif
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 95a0053b6ae1..3efed3d633d1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -16,9 +16,10 @@
 #include <linux/i2c-omap.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
-#include <plat/omap_hwmod.h>
 #include <plat-omap/dma-omap.h>
 #include <plat/dmtimer.h>
+
+#include "omap_hwmod.h"
 #include "l3_2xxx.h"
 #include "l4_2xxx.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index a6c24aea28b6..dc768c50e523 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -17,9 +17,10 @@
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
-#include <plat/omap_hwmod.h>
 #include <plat-omap/dma-omap.h>
 #include <plat/dmtimer.h>
+
+#include "omap_hwmod.h"
 #include "mmc.h"
 #include "l3_2xxx.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
index cbb4ef6544ad..74ae76767510 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
@@ -13,9 +13,10 @@
  */
 #include <asm/sizes.h>
 
-#include <plat/omap_hwmod.h>
 #include <plat/serial.h>
 
+#include "omap_hwmod.h"
+
 #include "omap_hwmod_common_data.h"
 
 struct omap_hwmod_addr_space omap2430_mmc1_addr_space[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index bfe64ee20606..57fc2f95584d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -9,10 +9,13 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <plat/omap_hwmod.h>
+
 #include <plat/serial.h>
 #include <plat-omap/dma-omap.h>
+
 #include "../plat-omap/common.h"
+
+#include "omap_hwmod.h"
 #include "hdq1w.h"
 
 #include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index 1a1287d62648..dd3809c8f409 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -13,8 +13,9 @@
  */
 #include <asm/sizes.h>
 
-#include <plat/omap_hwmod.h>
 #include <plat/serial.h>
+
+#include "omap_hwmod.h"
 #include "l3_2xxx.h"
 #include "l4_2xxx.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index b9024868774c..27bdff46fda0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -8,13 +8,14 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <plat/omap_hwmod.h>
+
 #include <plat/serial.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <plat-omap/dma-omap.h>
 #include <plat/dmtimer.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 #include "cm-regbits-24xx.h"
 #include "prm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index cb7c393c08de..60ed43531079 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -16,7 +16,7 @@
 
 #include <linux/i2c-omap.h>
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include <plat/cpu.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 14451217dac2..d5d52a776278 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -19,9 +19,9 @@
 #include <linux/power/smartreflex.h>
 #include <linux/platform_data/gpio-omap.h>
 
-#include <plat/omap_hwmod.h>
 #include <plat-omap/dma-omap.h>
 #include <plat/serial.h>
+
 #include "l3_3xxx.h"
 #include "l4_3xxx.h"
 #include <linux/platform_data/asoc-ti-mcbsp.h>
@@ -32,6 +32,7 @@
 #include "am35xx.h"
 
 #include "soc.h"
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 #include "prm-regbits-34xx.h"
 #include "cm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 0cee55135e29..5b9be734709c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -23,8 +23,8 @@
 #include <linux/power/smartreflex.h>
 #include <linux/i2c-omap.h>
 
-#include <plat/omap_hwmod.h>
 #include <plat-omap/dma-omap.h>
+
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <plat/dmtimer.h>
@@ -32,6 +32,7 @@
 
 #include "../plat-omap/common.h"
 
+#include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index 9f1ccdc8cc8c..79d623b83e49 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -16,7 +16,7 @@
  * data and their integration with other OMAP modules and Linux.
  */
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 
 #include "omap_hwmod_common_data.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 2bc8f1705d4a..cfcce299177c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -13,7 +13,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
 #define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 
 #include "common.h"
 #include "display.h"
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
index c784c12f98a1..7e437bf6024c 100644
--- a/arch/arm/mach-omap2/omap_opp_data.h
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -19,7 +19,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
 #define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 
 #include "voltage.h"
 
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index 4b3230fe228a..98c5969acf6d 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -15,7 +15,7 @@
 
 #include <asm/pmu.h>
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "omap_device.h"
 
 static char *omap2_pmu_oh_names[] = {"mpu"};
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 5df6dd96fd5c..a4fb791be2da 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -28,13 +28,13 @@
 #include <linux/console.h>
 
 #include <plat/omap-serial.h>
-#include "common.h"
 #include <plat-omap/dma-omap.h>
-#include <plat/omap_hwmod.h>
-#include "omap_device.h"
 #include <plat/omap-pm.h>
 #include <plat/serial.h>
 
+#include "common.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index a2ea2f30f7c9..b11df8230145 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -43,7 +43,7 @@
 #include <asm/sched_clock.h>
 
 #include <asm/arch_timer.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 #include "omap_device.h"
 #include <plat/dmtimer.h>
 #include <plat/omap-pm.h>
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c
index b2f1c67043a2..f6b6c37ac3f4 100644
--- a/arch/arm/mach-omap2/wd_timer.c
+++ b/arch/arm/mach-omap2/wd_timer.c
@@ -11,7 +11,7 @@
 #include <linux/io.h>
 #include <linux/err.h>
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 
 #include "wd_timer.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap2/wd_timer.h b/arch/arm/mach-omap2/wd_timer.h
index f6bbba73b535..a78f81034a9f 100644
--- a/arch/arm/mach-omap2/wd_timer.h
+++ b/arch/arm/mach-omap2/wd_timer.h
@@ -10,7 +10,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
 #define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
 
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
 
 extern int omap2_wd_timer_disable(struct omap_hwmod *oh);
 extern int omap2_wd_timer_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
deleted file mode 100644
index b3349f7b1a2c..000000000000
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ /dev/null
@@ -1,676 +0,0 @@
-/*
- * omap_hwmod macros, structures
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Copyright (C) 2012 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * Created in collaboration with (alphabetical order): Benoît Cousson,
- * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
- * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These headers and macros are used to define OMAP on-chip module
- * data and their integration with other OMAP modules and Linux.
- * Copious documentation and references can also be found in the
- * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
- * writing).
- *
- * To do:
- * - add interconnect error log structures
- * - add pinmuxing
- * - init_conn_id_bit (CONNID_BIT_VECTOR)
- * - implement default hwmod SMS/SDRC flags?
- * - move Linux-specific data ("non-ROM data") out
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <plat/cpu.h>
-
-struct omap_device;
-
-extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
-extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
-extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
-
-/*
- * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
- * with the original PRCM protocol defined for OMAP2420
- */
-#define SYSC_TYPE1_MIDLEMODE_SHIFT	12
-#define SYSC_TYPE1_MIDLEMODE_MASK	(0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT)
-#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT	8
-#define SYSC_TYPE1_CLOCKACTIVITY_MASK	(0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT)
-#define SYSC_TYPE1_SIDLEMODE_SHIFT	3
-#define SYSC_TYPE1_SIDLEMODE_MASK	(0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT)
-#define SYSC_TYPE1_ENAWAKEUP_SHIFT	2
-#define SYSC_TYPE1_ENAWAKEUP_MASK	(1 << SYSC_TYPE1_ENAWAKEUP_SHIFT)
-#define SYSC_TYPE1_SOFTRESET_SHIFT	1
-#define SYSC_TYPE1_SOFTRESET_MASK	(1 << SYSC_TYPE1_SOFTRESET_SHIFT)
-#define SYSC_TYPE1_AUTOIDLE_SHIFT	0
-#define SYSC_TYPE1_AUTOIDLE_MASK	(1 << SYSC_TYPE1_AUTOIDLE_SHIFT)
-
-/*
- * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
- * with the new PRCM protocol defined for new OMAP4 IPs.
- */
-#define SYSC_TYPE2_SOFTRESET_SHIFT	0
-#define SYSC_TYPE2_SOFTRESET_MASK	(1 << SYSC_TYPE2_SOFTRESET_SHIFT)
-#define SYSC_TYPE2_SIDLEMODE_SHIFT	2
-#define SYSC_TYPE2_SIDLEMODE_MASK	(0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
-#define SYSC_TYPE2_MIDLEMODE_SHIFT	4
-#define SYSC_TYPE2_MIDLEMODE_MASK	(0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
-#define SYSC_TYPE2_DMADISABLE_SHIFT	16
-#define SYSC_TYPE2_DMADISABLE_MASK	(0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
-
-/*
- * OCP SYSCONFIG bit shifts/masks TYPE3.
- * This is applicable for some IPs present in AM33XX
- */
-#define SYSC_TYPE3_SIDLEMODE_SHIFT	0
-#define SYSC_TYPE3_SIDLEMODE_MASK	(0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
-#define SYSC_TYPE3_MIDLEMODE_SHIFT	2
-#define SYSC_TYPE3_MIDLEMODE_MASK	(0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
-
-/* OCP SYSSTATUS bit shifts/masks */
-#define SYSS_RESETDONE_SHIFT		0
-#define SYSS_RESETDONE_MASK		(1 << SYSS_RESETDONE_SHIFT)
-
-/* Master standby/slave idle mode flags */
-#define HWMOD_IDLEMODE_FORCE		(1 << 0)
-#define HWMOD_IDLEMODE_NO		(1 << 1)
-#define HWMOD_IDLEMODE_SMART		(1 << 2)
-#define HWMOD_IDLEMODE_SMART_WKUP	(1 << 3)
-
-/* modulemode control type (SW or HW) */
-#define MODULEMODE_HWCTRL		1
-#define MODULEMODE_SWCTRL		2
-
-
-/**
- * struct omap_hwmod_mux_info - hwmod specific mux configuration
- * @pads:              array of omap_device_pad entries
- * @nr_pads:           number of omap_device_pad entries
- *
- * Note that this is currently built during init as needed.
- */
-struct omap_hwmod_mux_info {
-	int				nr_pads;
-	struct omap_device_pad		*pads;
-	int				nr_pads_dynamic;
-	struct omap_device_pad		**pads_dynamic;
-	int				*irqs;
-	bool				enabled;
-};
-
-/**
- * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
- * @name: name of the IRQ channel (module local name)
- * @irq: IRQ channel ID (should be non-negative except -1 = terminator)
- *
- * @name should be something short, e.g., "tx" or "rx".  It is for use
- * by platform_get_resource_byname().  It is defined locally to the
- * hwmod.
- */
-struct omap_hwmod_irq_info {
-	const char	*name;
-	s16		irq;
-};
-
-/**
- * struct omap_hwmod_dma_info - DMA channels used by the hwmod
- * @name: name of the DMA channel (module local name)
- * @dma_req: DMA request ID (should be non-negative except -1 = terminator)
- *
- * @name should be something short, e.g., "tx" or "rx".  It is for use
- * by platform_get_resource_byname().  It is defined locally to the
- * hwmod.
- */
-struct omap_hwmod_dma_info {
-	const char	*name;
-	s16		dma_req;
-};
-
-/**
- * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
- * @name: name of the reset line (module local name)
- * @rst_shift: Offset of the reset bit
- * @st_shift: Offset of the reset status bit (OMAP2/3 only)
- *
- * @name should be something short, e.g., "cpu0" or "rst". It is defined
- * locally to the hwmod.
- */
-struct omap_hwmod_rst_info {
-	const char	*name;
-	u8		rst_shift;
-	u8		st_shift;
-};
-
-/**
- * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
- * @role: "sys", "32k", "tv", etc -- for use in clk_get()
- * @clk: opt clock: OMAP clock name
- * @_clk: pointer to the struct clk (filled in at runtime)
- *
- * The module's interface clock and main functional clock should not
- * be added as optional clocks.
- */
-struct omap_hwmod_opt_clk {
-	const char	*role;
-	const char	*clk;
-	struct clk	*_clk;
-};
-
-
-/* omap_hwmod_omap2_firewall.flags bits */
-#define OMAP_FIREWALL_L3		(1 << 0)
-#define OMAP_FIREWALL_L4		(1 << 1)
-
-/**
- * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
- * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
- * @l4_fw_region: L4 firewall region ID
- * @l4_prot_group: L4 protection group ID
- * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
- */
-struct omap_hwmod_omap2_firewall {
-	u8 l3_perm_bit;
-	u8 l4_fw_region;
-	u8 l4_prot_group;
-	u8 flags;
-};
-
-
-/*
- * omap_hwmod_addr_space.flags bits
- *
- * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
- * ADDR_TYPE_RT: Address space contains module register target data.
- */
-#define ADDR_MAP_ON_INIT	(1 << 0)	/* XXX does not belong */
-#define ADDR_TYPE_RT		(1 << 1)
-
-/**
- * struct omap_hwmod_addr_space - address space handled by the hwmod
- * @name: name of the address space
- * @pa_start: starting physical address
- * @pa_end: ending physical address
- * @flags: (see omap_hwmod_addr_space.flags macros above)
- *
- * Address space doesn't necessarily follow physical interconnect
- * structure.  GPMC is one example.
- */
-struct omap_hwmod_addr_space {
-	const char *name;
-	u32 pa_start;
-	u32 pa_end;
-	u8 flags;
-};
-
-
-/*
- * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
- * interface to interact with the hwmod.  Used to add sleep dependencies
- * when the module is enabled or disabled.
- */
-#define OCP_USER_MPU			(1 << 0)
-#define OCP_USER_SDMA			(1 << 1)
-#define OCP_USER_DSP			(1 << 2)
-#define OCP_USER_IVA			(1 << 3)
-
-/* omap_hwmod_ocp_if.flags bits */
-#define OCPIF_SWSUP_IDLE		(1 << 0)
-#define OCPIF_CAN_BURST			(1 << 1)
-
-/* omap_hwmod_ocp_if._int_flags possibilities */
-#define _OCPIF_INT_FLAGS_REGISTERED	(1 << 0)
-
-
-/**
- * struct omap_hwmod_ocp_if - OCP interface data
- * @master: struct omap_hwmod that initiates OCP transactions on this link
- * @slave: struct omap_hwmod that responds to OCP transactions on this link
- * @addr: address space associated with this link
- * @clk: interface clock: OMAP clock name
- * @_clk: pointer to the interface struct clk (filled in at runtime)
- * @fw: interface firewall data
- * @width: OCP data width
- * @user: initiators using this interface (see OCP_USER_* macros above)
- * @flags: OCP interface flags (see OCPIF_* macros above)
- * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above)
- *
- * It may also be useful to add a tag_cnt field for OCP2.x devices.
- *
- * Parameter names beginning with an underscore are managed internally by
- * the omap_hwmod code and should not be set during initialization.
- */
-struct omap_hwmod_ocp_if {
-	struct omap_hwmod		*master;
-	struct omap_hwmod		*slave;
-	struct omap_hwmod_addr_space	*addr;
-	const char			*clk;
-	struct clk			*_clk;
-	union {
-		struct omap_hwmod_omap2_firewall omap2;
-	}				fw;
-	u8				width;
-	u8				user;
-	u8				flags;
-	u8				_int_flags;
-};
-
-
-/* Macros for use in struct omap_hwmod_sysconfig */
-
-/* Flags for use in omap_hwmod_sysconfig.idlemodes */
-#define MASTER_STANDBY_SHIFT	4
-#define SLAVE_IDLE_SHIFT	0
-#define SIDLE_FORCE		(HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
-#define SIDLE_NO		(HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
-#define SIDLE_SMART		(HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
-#define SIDLE_SMART_WKUP	(HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
-#define MSTANDBY_FORCE		(HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_NO		(HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_SMART		(HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_SMART_WKUP	(HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT)
-
-/* omap_hwmod_sysconfig.sysc_flags capability flags */
-#define SYSC_HAS_AUTOIDLE	(1 << 0)
-#define SYSC_HAS_SOFTRESET	(1 << 1)
-#define SYSC_HAS_ENAWAKEUP	(1 << 2)
-#define SYSC_HAS_EMUFREE	(1 << 3)
-#define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
-#define SYSC_HAS_SIDLEMODE	(1 << 5)
-#define SYSC_HAS_MIDLEMODE	(1 << 6)
-#define SYSS_HAS_RESET_STATUS	(1 << 7)
-#define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
-#define SYSC_HAS_RESET_STATUS	(1 << 9)
-#define SYSC_HAS_DMADISABLE	(1 << 10)
-
-/* omap_hwmod_sysconfig.clockact flags */
-#define CLOCKACT_TEST_BOTH	0x0
-#define CLOCKACT_TEST_MAIN	0x1
-#define CLOCKACT_TEST_ICLK	0x2
-#define CLOCKACT_TEST_NONE	0x3
-
-/**
- * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets.
- * @midle_shift: Offset of the midle bit
- * @clkact_shift: Offset of the clockactivity bit
- * @sidle_shift: Offset of the sidle bit
- * @enwkup_shift: Offset of the enawakeup bit
- * @srst_shift: Offset of the softreset bit
- * @autoidle_shift: Offset of the autoidle bit
- * @dmadisable_shift: Offset of the dmadisable bit
- */
-struct omap_hwmod_sysc_fields {
-	u8 midle_shift;
-	u8 clkact_shift;
-	u8 sidle_shift;
-	u8 enwkup_shift;
-	u8 srst_shift;
-	u8 autoidle_shift;
-	u8 dmadisable_shift;
-};
-
-/**
- * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
- * @rev_offs: IP block revision register offset (from module base addr)
- * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
- * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
- * @srst_udelay: Delay needed after doing a softreset in usecs
- * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
- * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
- * @clockact: the default value of the module CLOCKACTIVITY bits
- *
- * @clockact describes to the module which clocks are likely to be
- * disabled when the PRCM issues its idle request to the module.  Some
- * modules have separate clockdomains for the interface clock and main
- * functional clock, and can check whether they should acknowledge the
- * idle request based on the internal module functionality that has
- * been associated with the clocks marked in @clockact.  This field is
- * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
- *
- * @sysc_fields: structure containing the offset positions of various bits in
- * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
- * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
- * whether the device ip is compliant with the original PRCM protocol
- * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
- * If the device follows a different scheme for the sysconfig register ,
- * then this field has to be populated with the correct offset structure.
- */
-struct omap_hwmod_class_sysconfig {
-	u32 rev_offs;
-	u32 sysc_offs;
-	u32 syss_offs;
-	u16 sysc_flags;
-	struct omap_hwmod_sysc_fields *sysc_fields;
-	u8 srst_udelay;
-	u8 idlemodes;
-	u8 clockact;
-};
-
-/**
- * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
- * @module_offs: PRCM submodule offset from the start of the PRM/CM
- * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
- * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
- * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
- * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
- * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
- *
- * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
- * WKEN, GRPSEL registers.  In an ideal world, no extra information
- * would be needed for IDLEST information, but alas, there are some
- * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
- * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
- */
-struct omap_hwmod_omap2_prcm {
-	s16 module_offs;
-	u8 prcm_reg_id;
-	u8 module_bit;
-	u8 idlest_reg_id;
-	u8 idlest_idle_bit;
-	u8 idlest_stdby_bit;
-};
-
-/*
- * Possible values for struct omap_hwmod_omap4_prcm.flags
- *
- * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
- *     module-level context loss register associated with them; this
- *     flag bit should be set in those cases
- */
-#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT		(1 << 0)
-
-/**
- * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
- * @clkctrl_reg: PRCM address of the clock control register
- * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
- * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register
- * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
- * @submodule_wkdep_bit: bit shift of the WKDEP range
- * @flags: PRCM register capabilities for this IP block
- *
- * If @lostcontext_mask is not defined, context loss check code uses
- * whole register without masking. @lostcontext_mask should only be
- * defined in cases where @context_offs register is shared by two or
- * more hwmods.
- */
-struct omap_hwmod_omap4_prcm {
-	u16		clkctrl_offs;
-	u16		rstctrl_offs;
-	u16		rstst_offs;
-	u16		context_offs;
-	u32		lostcontext_mask;
-	u8		submodule_wkdep_bit;
-	u8		modulemode;
-	u8		flags;
-};
-
-
-/*
- * omap_hwmod.flags definitions
- *
- * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
- *     of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- *     of standby, rather than relying on module smart-standby
- * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
- *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
- *     XXX Should be HWMOD_SETUP_NO_RESET
- * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
- *     controller, etc. XXX probably belongs outside the main hwmod file
- *     XXX Should be HWMOD_SETUP_NO_IDLE
- * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
- *     when module is enabled, rather than the default, which is to
- *     enable autoidle
- * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
- * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
- *     only for few initiator modules on OMAP2 & 3.
- * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
- *     This is needed for devices like DSS that require optional clocks enabled
- *     in order to complete the reset. Optional clocks will be disabled
- *     again after the reset.
- * HWMOD_16BIT_REG: Module has 16bit registers
- */
-#define HWMOD_SWSUP_SIDLE			(1 << 0)
-#define HWMOD_SWSUP_MSTANDBY			(1 << 1)
-#define HWMOD_INIT_NO_RESET			(1 << 2)
-#define HWMOD_INIT_NO_IDLE			(1 << 3)
-#define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
-#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
-#define HWMOD_NO_IDLEST				(1 << 6)
-#define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
-#define HWMOD_16BIT_REG				(1 << 8)
-
-/*
- * omap_hwmod._int_flags definitions
- * These are for internal use only and are managed by the omap_hwmod code.
- *
- * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
- * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
- * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
- * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
- *     causes the first call to _enable() to only update the pinmux
- */
-#define _HWMOD_NO_MPU_PORT			(1 << 0)
-#define _HWMOD_WAKEUP_ENABLED			(1 << 1)
-#define _HWMOD_SYSCONFIG_LOADED			(1 << 2)
-#define _HWMOD_SKIP_ENABLE			(1 << 3)
-
-/*
- * omap_hwmod._state definitions
- *
- * INITIALIZED: reset (optionally), initialized, enabled, disabled
- *              (optionally)
- *
- *
- */
-#define _HWMOD_STATE_UNKNOWN			0
-#define _HWMOD_STATE_REGISTERED			1
-#define _HWMOD_STATE_CLKS_INITED		2
-#define _HWMOD_STATE_INITIALIZED		3
-#define _HWMOD_STATE_ENABLED			4
-#define _HWMOD_STATE_IDLE			5
-#define _HWMOD_STATE_DISABLED			6
-
-/**
- * struct omap_hwmod_class - the type of an IP block
- * @name: name of the hwmod_class
- * @sysc: device SYSCONFIG/SYSSTATUS register data
- * @rev: revision of the IP class
- * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
- * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
- *
- * Represent the class of a OMAP hardware "modules" (e.g. timer,
- * smartreflex, gpio, uart...)
- *
- * @pre_shutdown is a function that will be run immediately before
- * hwmod clocks are disabled, etc.  It is intended for use for hwmods
- * like the MPU watchdog, which cannot be disabled with the standard
- * omap_hwmod_shutdown().  The function should return 0 upon success,
- * or some negative error upon failure.  Returning an error will cause
- * omap_hwmod_shutdown() to abort the device shutdown and return an
- * error.
- *
- * If @reset is defined, then the function it points to will be
- * executed in place of the standard hwmod _reset() code in
- * mach-omap2/omap_hwmod.c.  This is needed for IP blocks which have
- * unusual reset sequences - usually processor IP blocks like the IVA.
- */
-struct omap_hwmod_class {
-	const char				*name;
-	struct omap_hwmod_class_sysconfig	*sysc;
-	u32					rev;
-	int					(*pre_shutdown)(struct omap_hwmod *oh);
-	int					(*reset)(struct omap_hwmod *oh);
-};
-
-/**
- * struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs
- * @ocp_if: OCP interface structure record pointer
- * @node: list_head pointing to next struct omap_hwmod_link in a list
- */
-struct omap_hwmod_link {
-	struct omap_hwmod_ocp_if	*ocp_if;
-	struct list_head		node;
-};
-
-/**
- * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
- * @name: name of the hwmod
- * @class: struct omap_hwmod_class * to the class of this hwmod
- * @od: struct omap_device currently associated with this hwmod (internal use)
- * @mpu_irqs: ptr to an array of MPU IRQs
- * @sdma_reqs: ptr to an array of System DMA request IDs
- * @prcm: PRCM data pertaining to this hwmod
- * @main_clk: main clock: OMAP clock name
- * @_clk: pointer to the main struct clk (filled in at runtime)
- * @opt_clks: other device clocks that drivers can request (0..*)
- * @voltdm: pointer to voltage domain (filled in at runtime)
- * @dev_attr: arbitrary device attributes that can be passed to the driver
- * @_sysc_cache: internal-use hwmod flags
- * @_mpu_rt_va: cached register target start address (internal use)
- * @_mpu_port: cached MPU register target slave (internal use)
- * @opt_clks_cnt: number of @opt_clks
- * @master_cnt: number of @master entries
- * @slaves_cnt: number of @slave entries
- * @response_lat: device OCP response latency (in interface clock cycles)
- * @_int_flags: internal-use hwmod flags
- * @_state: internal-use hwmod state
- * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
- * @flags: hwmod flags (documented below)
- * @_lock: spinlock serializing operations on this hwmod
- * @node: list node for hwmod list (internal use)
- *
- * @main_clk refers to this module's "main clock," which for our
- * purposes is defined as "the functional clock needed for register
- * accesses to complete."  Modules may not have a main clock if the
- * interface clock also serves as a main clock.
- *
- * Parameter names beginning with an underscore are managed internally by
- * the omap_hwmod code and should not be set during initialization.
- *
- * @masters and @slaves are now deprecated.
- */
-struct omap_hwmod {
-	const char			*name;
-	struct omap_hwmod_class		*class;
-	struct omap_device		*od;
-	struct omap_hwmod_mux_info	*mux;
-	struct omap_hwmod_irq_info	*mpu_irqs;
-	struct omap_hwmod_dma_info	*sdma_reqs;
-	struct omap_hwmod_rst_info	*rst_lines;
-	union {
-		struct omap_hwmod_omap2_prcm omap2;
-		struct omap_hwmod_omap4_prcm omap4;
-	}				prcm;
-	const char			*main_clk;
-	struct clk			*_clk;
-	struct omap_hwmod_opt_clk	*opt_clks;
-	char				*clkdm_name;
-	struct clockdomain		*clkdm;
-	struct list_head		master_ports; /* connect to *_IA */
-	struct list_head		slave_ports; /* connect to *_TA */
-	void				*dev_attr;
-	u32				_sysc_cache;
-	void __iomem			*_mpu_rt_va;
-	spinlock_t			_lock;
-	struct list_head		node;
-	struct omap_hwmod_ocp_if	*_mpu_port;
-	u16				flags;
-	u8				response_lat;
-	u8				rst_lines_cnt;
-	u8				opt_clks_cnt;
-	u8				masters_cnt;
-	u8				slaves_cnt;
-	u8				hwmods_cnt;
-	u8				_int_flags;
-	u8				_state;
-	u8				_postsetup_state;
-};
-
-struct omap_hwmod *omap_hwmod_lookup(const char *name);
-int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
-			void *data);
-
-int __init omap_hwmod_setup_one(const char *name);
-
-int omap_hwmod_enable(struct omap_hwmod *oh);
-int omap_hwmod_idle(struct omap_hwmod *oh);
-int omap_hwmod_shutdown(struct omap_hwmod *oh);
-
-int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
-int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
-int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
-
-int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
-int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
-
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
-
-int omap_hwmod_reset(struct omap_hwmod *oh);
-void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
-
-void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
-u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
-int omap_hwmod_softreset(struct omap_hwmod *oh);
-
-int omap_hwmod_count_resources(struct omap_hwmod *oh);
-int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
-int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
-int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
-				   const char *name, struct resource *res);
-
-struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
-void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
-
-int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
-				 struct omap_hwmod *init_oh);
-int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
-				 struct omap_hwmod *init_oh);
-
-int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
-int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
-
-int omap_hwmod_for_each_by_class(const char *classname,
-				 int (*fn)(struct omap_hwmod *oh,
-					   void *user),
-				 void *user);
-
-int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
-int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
-
-int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
-
-int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
-
-extern void __init omap_hwmod_init(void);
-
-const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
-
-/*
- * Chip variant-specific hwmod init routines - XXX should be converted
- * to use initcalls once the initial boot ordering is straightened out
- */
-extern int omap2420_hwmod_init(void);
-extern int omap2430_hwmod_init(void);
-extern int omap3xxx_hwmod_init(void);
-extern int omap44xx_hwmod_init(void);
-extern int am33xx_hwmod_init(void);
-
-extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
-
-#endif
-- 
cgit v1.2.3


From 1d5aef4950717526d4827e97a916d38d0d73657e Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 3 Oct 2012 16:36:40 -0700
Subject: ARM: OMAP: Make plat/omap-pm.h local to mach-omap2

We must move this for ARM common zImage support.

Note that neither drivers/media/rc/ir-rx51.c or
drivers/media/platform/omap3isp/ispvideo.c need
to include omap-pm.h, so this patch removes the
include for those files.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/pm_bus.c                 |   2 -
 arch/arm/mach-omap2/board-rx51-peripherals.c |   2 +-
 arch/arm/mach-omap2/display.c                |   2 +-
 arch/arm/mach-omap2/dsp.c                    |   2 +-
 arch/arm/mach-omap2/gpio.c                   |   2 +-
 arch/arm/mach-omap2/hsmmc.c                  |   2 +-
 arch/arm/mach-omap2/io.c                     |   2 +-
 arch/arm/mach-omap2/omap-pm.h                | 352 +++++++++++++++++++++++++++
 arch/arm/mach-omap2/pm-debug.c               |   2 +-
 arch/arm/mach-omap2/pm.c                     |   2 +-
 arch/arm/mach-omap2/serial.c                 |   2 +-
 arch/arm/mach-omap2/timer.c                  |   2 +-
 arch/arm/plat-omap/dmtimer.c                 |   3 +-
 arch/arm/plat-omap/include/plat/omap-pm.h    | 352 ---------------------------
 arch/arm/plat-omap/omap-pm-noop.c            |   4 +-
 drivers/media/rc/ir-rx51.c                   |   1 -
 16 files changed, 365 insertions(+), 369 deletions(-)
 create mode 100644 arch/arm/mach-omap2/omap-pm.h
 delete mode 100644 arch/arm/plat-omap/include/plat/omap-pm.h

(limited to 'arch/arm/mach-omap2/display.c')

diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 8a74ec5e3de2..16bf2f95117c 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -19,8 +19,6 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-#include <plat/omap-pm.h>
-
 #ifdef CONFIG_PM_RUNTIME
 static int omap1_pm_runtime_suspend(struct device *dev)
 {
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index c2eed847c05b..07005fe40a2a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -32,7 +32,6 @@
 
 #include "common.h"
 #include <plat-omap/dma-omap.h>
-#include <plat/omap-pm.h>
 #include "gpmc-smc91x.h"
 
 #include "board-rx51.h"
@@ -51,6 +50,7 @@
 #endif
 
 #include "mux.h"
+#include "omap-pm.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
 #include "gpmc.h"
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 815af41c4375..9aaaf4e03ca3 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -27,7 +27,7 @@
 #include <video/omapdss.h>
 #include "omap_hwmod.h"
 #include "omap_device.h"
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #include "common.h"
 
 #include "iomap.h"
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 98388109f22a..b155500e84a8 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -27,7 +27,7 @@
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #ifdef CONFIG_BRIDGE_DVFS
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #endif
 
 #include <linux/platform_data/dsp-omap.h>
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 80b1e1a05ce2..399acabc3d0b 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -25,7 +25,7 @@
 
 #include "omap_hwmod.h"
 #include "omap_device.h"
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 
 #include "powerdomain.h"
 
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 797e8c6a4130..ddbf2eb6ba5b 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -17,8 +17,8 @@
 #include <mach/hardware.h>
 #include <linux/platform_data/gpio-omap.h>
 
-#include <plat/omap-pm.h>
 #include "omap_device.h"
+#include "omap-pm.h"
 
 #include "mux.h"
 #include "mmc.h"
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index b373cb59845c..80d1cf17af8c 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/serial.h>
-#include <plat/omap-pm.h>
 #include <plat-omap/dma-omap.h>
 
 #include "../plat-omap/sram.h"
@@ -42,6 +41,7 @@
 #include "clock2xxx.h"
 #include "clock3xxx.h"
 #include "clock44xx.h"
+#include "omap-pm.h"
 #include "sdrc.h"
 
 /*
diff --git a/arch/arm/mach-omap2/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h
new file mode 100644
index 000000000000..67faa7b8fe92
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-pm.h
@@ -0,0 +1,352 @@
+/*
+ * omap-pm.h - OMAP power management interface
+ *
+ * Copyright (C) 2008-2010 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
+ * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
+ * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
+ * Richard Woodruff
+ */
+
+#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
+#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
+
+#include <linux/device.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/opp.h>
+
+/*
+ * agent_id values for use with omap_pm_set_min_bus_tput():
+ *
+ * OCP_INITIATOR_AGENT is only valid for devices that can act as
+ * initiators -- it represents the device's L3 interconnect
+ * connection.  OCP_TARGET_AGENT represents the device's L4
+ * interconnect connection.
+ */
+#define OCP_TARGET_AGENT		1
+#define OCP_INITIATOR_AGENT		2
+
+/**
+ * omap_pm_if_early_init - OMAP PM init code called before clock fw init
+ * @mpu_opp_table: array ptr to struct omap_opp for MPU
+ * @dsp_opp_table: array ptr to struct omap_opp for DSP
+ * @l3_opp_table : array ptr to struct omap_opp for CORE
+ *
+ * Initialize anything that must be configured before the clock
+ * framework starts.  The "_if_" is to avoid name collisions with the
+ * PM idle-loop code.
+ */
+int __init omap_pm_if_early_init(void);
+
+/**
+ * omap_pm_if_init - OMAP PM init code called after clock fw init
+ *
+ * The main initialization code.  OPP tables are passed in here.  The
+ * "_if_" is to avoid name collisions with the PM idle-loop code.
+ */
+int __init omap_pm_if_init(void);
+
+/**
+ * omap_pm_if_exit - OMAP PM exit code
+ *
+ * Exit code; currently unused.  The "_if_" is to avoid name
+ * collisions with the PM idle-loop code.
+ */
+void omap_pm_if_exit(void);
+
+/*
+ * Device-driver-originated constraints (via board-*.c files, platform_data)
+ */
+
+
+/**
+ * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
+ * @dev: struct device * requesting the constraint
+ * @t: maximum MPU wakeup latency in microseconds
+ *
+ * Request that the maximum interrupt latency for the MPU to be no
+ * greater than @t microseconds. "Interrupt latency" in this case is
+ * defined as the elapsed time from the occurrence of a hardware or
+ * timer interrupt to the time when the device driver's interrupt
+ * service routine has been entered by the MPU.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the MPU powerdomain into, and
+ * possibly the CORE powerdomain as well, since interrupt handling
+ * code currently runs from SDRAM.  Advanced PM or board*.c code may
+ * also configure interrupt controller priorities, OCP bus priorities,
+ * CPU speed(s), etc.
+ *
+ * This function will not affect device wakeup latency, e.g., time
+ * elapsed from when a device driver enables a hardware device with
+ * clk_enable(), to when the device is ready for register access or
+ * other use.  To control this device wakeup latency, use
+ * omap_pm_set_max_dev_wakeup_lat()
+ *
+ * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the
+ * previous t value.  To remove the latency target for the MPU, call
+ * with t = -1.
+ *
+ * XXX This constraint will be deprecated soon in favor of the more
+ * general omap_pm_set_max_dev_wakeup_lat()
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
+ * @dev: struct device * requesting the constraint
+ * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
+ * @r: minimum throughput (in KiB/s)
+ *
+ * Request that the minimum data throughput on the OCP interconnect
+ * attached to device @dev interconnect agent @tbus_id be no less
+ * than @r KiB/s.
+ *
+ * It is expected that the OMAP PM or bus code will use this
+ * information to set the interconnect clock to run at the lowest
+ * possible speed that satisfies all current system users.  The PM or
+ * bus code will adjust the estimate based on its model of the bus, so
+ * device driver authors should attempt to specify an accurate
+ * quantity for their device use case, and let the PM or bus code
+ * overestimate the numbers as necessary to handle request/response
+ * latency, other competing users on the system, etc.  On OMAP2/3, if
+ * a driver requests a minimum L4 interconnect speed constraint, the
+ * code will also need to add an minimum L3 interconnect speed
+ * constraint,
+ *
+ * Multiple calls to omap_pm_set_min_bus_tput() will replace the
+ * previous rate value for this device.  To remove the interconnect
+ * throughput restriction for this device, call with r = 0.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
+
+
+/**
+ * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
+ * @req_dev: struct device * requesting the constraint, or NULL if none
+ * @dev: struct device * to set the constraint one
+ * @t: maximum device wakeup latency in microseconds
+ *
+ * Request that the maximum amount of time necessary for a device @dev
+ * to become accessible after its clocks are enabled should be no
+ * greater than @t microseconds.  Specifically, this represents the
+ * time from when a device driver enables device clocks with
+ * clk_enable(), to when the register reads and writes on the device
+ * will succeed.  This function should be called before clk_disable()
+ * is called, since the power state transition decision may be made
+ * during clk_disable().
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the powerdomain enclosing this
+ * device into.
+ *
+ * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the
+ * previous wakeup latency values for this device.  To remove the
+ * wakeup latency restriction for this device, call with t = -1.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
+				   long t);
+
+
+/**
+ * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency
+ * @dev: struct device *
+ * @t: maximum DMA transfer start latency in microseconds
+ *
+ * Request that the maximum system DMA transfer start latency for this
+ * device 'dev' should be no greater than 't' microseconds.  "DMA
+ * transfer start latency" here is defined as the elapsed time from
+ * when a device (e.g., McBSP) requests that a system DMA transfer
+ * start or continue, to the time at which data starts to flow into
+ * that device from the system DMA controller.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the CORE powerdomain into.
+ *
+ * Since system DMA transfers may not involve the MPU, this function
+ * will not affect MPU wakeup latency.  Use set_max_cpu_lat() to do
+ * so.  Similarly, this function will not affect device wakeup latency
+ * -- use set_max_dev_wakeup_lat() to affect that.
+ *
+ * Multiple calls to set_max_sdma_lat() will replace the previous t
+ * value for this device.  To remove the maximum DMA latency for this
+ * device, call with t = -1.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_max_sdma_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev
+ * @dev: struct device * requesting the constraint
+ * @clk: struct clk * to set the minimum rate constraint on
+ * @r: minimum rate in Hz
+ *
+ * Request that the minimum clock rate on the device @dev's clk @clk
+ * be no less than @r Hz.
+ *
+ * It is expected that the OMAP PM code will use this information to
+ * find an OPP or clock setting that will satisfy this clock rate
+ * constraint, along with any other applicable system constraints on
+ * the clock rate or corresponding voltage, etc.
+ *
+ * omap_pm_set_min_clk_rate() differs from the clock code's
+ * clk_set_rate() in that it considers other constraints before taking
+ * any hardware action, and may change a system OPP rather than just a
+ * clock rate.  clk_set_rate() is intended to be a low-level
+ * interface.
+ *
+ * omap_pm_set_min_clk_rate() is easily open to abuse.  A better API
+ * would be something like "omap_pm_set_min_dev_performance()";
+ * however, there is no easily-generalizable concept of performance
+ * that applies to all devices.  Only a device (and possibly the
+ * device subsystem) has both the subsystem-specific knowledge, and
+ * the hardware IP block-specific knowledge, to translate a constraint
+ * on "touchscreen sampling accuracy" or "number of pixels or polygons
+ * rendered per second" to a clock rate.  This translation can be
+ * dependent on the hardware IP block's revision, or firmware version,
+ * and the driver is the only code on the system that has this
+ * information and can know how to translate that into a clock rate.
+ *
+ * The intended use-case for this function is for userspace or other
+ * kernel code to communicate a particular performance requirement to
+ * a subsystem; then for the subsystem to communicate that requirement
+ * to something that is meaningful to the device driver; then for the
+ * device driver to convert that requirement to a clock rate, and to
+ * then call omap_pm_set_min_clk_rate().
+ *
+ * Users of this function (such as device drivers) should not simply
+ * call this function with some high clock rate to ensure "high
+ * performance."  Rather, the device driver should take a performance
+ * constraint from its subsystem, such as "render at least X polygons
+ * per second," and use some formula or table to convert that into a
+ * clock rate constraint given the hardware type and hardware
+ * revision.  Device drivers or subsystems should not assume that they
+ * know how to make a power/performance tradeoff - some device use
+ * cases may tolerate a lower-fidelity device function for lower power
+ * consumption; others may demand a higher-fidelity device function,
+ * no matter what the power consumption.
+ *
+ * Multiple calls to omap_pm_set_min_clk_rate() will replace the
+ * previous rate value for the device @dev.  To remove the minimum clock
+ * rate constraint for the device, call with r = 0.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r);
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+/**
+ * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table
+ *
+ * Intended for use by DSPBridge.  Returns an array of OPP->DSP clock
+ * frequency entries.  The final item in the array should have .rate =
+ * .opp_id = 0.
+ */
+const struct omap_opp *omap_pm_dsp_get_opp_table(void);
+
+/**
+ * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge
+ * @opp_id: target DSP OPP ID
+ *
+ * Set a minimum OPP ID for the DSP.  This is intended to be called
+ * only from the DSP Bridge MPU-side driver.  Unfortunately, the only
+ * information that code receives from the DSP/BIOS load estimator is the
+ * target OPP ID; hence, this interface.  No return value.
+ */
+void omap_pm_dsp_set_min_opp(u8 opp_id);
+
+/**
+ * omap_pm_dsp_get_opp - report the current DSP OPP ID
+ *
+ * Report the current OPP for the DSP.  Since on OMAP3, the DSP and
+ * MPU share a single voltage domain, the OPP ID returned back may
+ * represent a higher DSP speed than the OPP requested via
+ * omap_pm_dsp_set_min_opp().
+ *
+ * Returns the current VDD1 OPP ID, or 0 upon error.
+ */
+u8 omap_pm_dsp_get_opp(void);
+
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+/**
+ * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr
+ *
+ * Provide a frequency table usable by CPUFreq for the current chip/board.
+ * Returns a pointer to a struct cpufreq_frequency_table array or NULL
+ * upon error.
+ */
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void);
+
+/**
+ * omap_pm_cpu_set_freq - set the current minimum MPU frequency
+ * @f: MPU frequency in Hz
+ *
+ * Set the current minimum CPU frequency.  The actual CPU frequency
+ * used could end up higher if the DSP requested a higher OPP.
+ * Intended to be called by plat-omap/cpu_omap.c:omap_target().  No
+ * return value.
+ */
+void omap_pm_cpu_set_freq(unsigned long f);
+
+/**
+ * omap_pm_cpu_get_freq - report the current CPU frequency
+ *
+ * Returns the current MPU frequency, or 0 upon error.
+ */
+unsigned long omap_pm_cpu_get_freq(void);
+
+
+/*
+ * Device context loss tracking
+ */
+
+/**
+ * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
+ * @dev: struct device *
+ *
+ * This function returns the number of times that the device @dev has
+ * lost its internal context.  This generally occurs on a powerdomain
+ * transition to OFF.  Drivers use this as an optimization to avoid restoring
+ * context if the device hasn't lost it.  To use, drivers should initially
+ * call this in their context save functions and store the result.  Early in
+ * the driver's context restore function, the driver should call this function
+ * again, and compare the result to the stored counter.  If they differ, the
+ * driver must restore device context.   If the number of context losses
+ * exceeds the maximum positive integer, the function will wrap to 0 and
+ * continue counting.  Returns the number of context losses for this device,
+ * or negative value upon error.
+ */
+int omap_pm_get_dev_context_loss_count(struct device *dev);
+
+void omap_pm_enable_off_mode(void);
+void omap_pm_disable_off_mode(void);
+
+#endif
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 46092cd806fa..b91283edf415 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -31,7 +31,7 @@
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 4f749a1e3aa2..e66855ef4c78 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -20,7 +20,7 @@
 
 #include <asm/system_misc.h>
 
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 #include "omap_device.h"
 #include "common.h"
 
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index a4fb791be2da..a3da4654de97 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -29,12 +29,12 @@
 
 #include <plat/omap-serial.h>
 #include <plat-omap/dma-omap.h>
-#include <plat/omap-pm.h>
 #include <plat/serial.h>
 
 #include "common.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
+#include "omap-pm.h"
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index b11df8230145..45598ac819be 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -46,7 +46,7 @@
 #include "omap_hwmod.h"
 #include "omap_device.h"
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
 
 #include "soc.h"
 #include "common.h"
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 938b50a33439..4a0b30a4ebda 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -42,10 +42,11 @@
 #include <linux/pm_runtime.h>
 
 #include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
 
 #include <mach/hardware.h>
 
+#include "../mach-omap2/omap-pm.h"
+
 static u32 omap_reserved_systimers;
 static LIST_HEAD(omap_timer_list);
 static DEFINE_SPINLOCK(dm_timer_lock);
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
deleted file mode 100644
index 67faa7b8fe92..000000000000
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * omap-pm.h - OMAP power management interface
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- * Paul Walmsley
- *
- * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
- * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
- * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
- * Richard Woodruff
- */
-
-#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
-#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
-
-#include <linux/device.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/opp.h>
-
-/*
- * agent_id values for use with omap_pm_set_min_bus_tput():
- *
- * OCP_INITIATOR_AGENT is only valid for devices that can act as
- * initiators -- it represents the device's L3 interconnect
- * connection.  OCP_TARGET_AGENT represents the device's L4
- * interconnect connection.
- */
-#define OCP_TARGET_AGENT		1
-#define OCP_INITIATOR_AGENT		2
-
-/**
- * omap_pm_if_early_init - OMAP PM init code called before clock fw init
- * @mpu_opp_table: array ptr to struct omap_opp for MPU
- * @dsp_opp_table: array ptr to struct omap_opp for DSP
- * @l3_opp_table : array ptr to struct omap_opp for CORE
- *
- * Initialize anything that must be configured before the clock
- * framework starts.  The "_if_" is to avoid name collisions with the
- * PM idle-loop code.
- */
-int __init omap_pm_if_early_init(void);
-
-/**
- * omap_pm_if_init - OMAP PM init code called after clock fw init
- *
- * The main initialization code.  OPP tables are passed in here.  The
- * "_if_" is to avoid name collisions with the PM idle-loop code.
- */
-int __init omap_pm_if_init(void);
-
-/**
- * omap_pm_if_exit - OMAP PM exit code
- *
- * Exit code; currently unused.  The "_if_" is to avoid name
- * collisions with the PM idle-loop code.
- */
-void omap_pm_if_exit(void);
-
-/*
- * Device-driver-originated constraints (via board-*.c files, platform_data)
- */
-
-
-/**
- * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
- * @dev: struct device * requesting the constraint
- * @t: maximum MPU wakeup latency in microseconds
- *
- * Request that the maximum interrupt latency for the MPU to be no
- * greater than @t microseconds. "Interrupt latency" in this case is
- * defined as the elapsed time from the occurrence of a hardware or
- * timer interrupt to the time when the device driver's interrupt
- * service routine has been entered by the MPU.
- *
- * It is intended that underlying PM code will use this information to
- * determine what power state to put the MPU powerdomain into, and
- * possibly the CORE powerdomain as well, since interrupt handling
- * code currently runs from SDRAM.  Advanced PM or board*.c code may
- * also configure interrupt controller priorities, OCP bus priorities,
- * CPU speed(s), etc.
- *
- * This function will not affect device wakeup latency, e.g., time
- * elapsed from when a device driver enables a hardware device with
- * clk_enable(), to when the device is ready for register access or
- * other use.  To control this device wakeup latency, use
- * omap_pm_set_max_dev_wakeup_lat()
- *
- * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the
- * previous t value.  To remove the latency target for the MPU, call
- * with t = -1.
- *
- * XXX This constraint will be deprecated soon in favor of the more
- * general omap_pm_set_max_dev_wakeup_lat()
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
-
-
-/**
- * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
- * @dev: struct device * requesting the constraint
- * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
- * @r: minimum throughput (in KiB/s)
- *
- * Request that the minimum data throughput on the OCP interconnect
- * attached to device @dev interconnect agent @tbus_id be no less
- * than @r KiB/s.
- *
- * It is expected that the OMAP PM or bus code will use this
- * information to set the interconnect clock to run at the lowest
- * possible speed that satisfies all current system users.  The PM or
- * bus code will adjust the estimate based on its model of the bus, so
- * device driver authors should attempt to specify an accurate
- * quantity for their device use case, and let the PM or bus code
- * overestimate the numbers as necessary to handle request/response
- * latency, other competing users on the system, etc.  On OMAP2/3, if
- * a driver requests a minimum L4 interconnect speed constraint, the
- * code will also need to add an minimum L3 interconnect speed
- * constraint,
- *
- * Multiple calls to omap_pm_set_min_bus_tput() will replace the
- * previous rate value for this device.  To remove the interconnect
- * throughput restriction for this device, call with r = 0.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
-
-
-/**
- * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
- * @req_dev: struct device * requesting the constraint, or NULL if none
- * @dev: struct device * to set the constraint one
- * @t: maximum device wakeup latency in microseconds
- *
- * Request that the maximum amount of time necessary for a device @dev
- * to become accessible after its clocks are enabled should be no
- * greater than @t microseconds.  Specifically, this represents the
- * time from when a device driver enables device clocks with
- * clk_enable(), to when the register reads and writes on the device
- * will succeed.  This function should be called before clk_disable()
- * is called, since the power state transition decision may be made
- * during clk_disable().
- *
- * It is intended that underlying PM code will use this information to
- * determine what power state to put the powerdomain enclosing this
- * device into.
- *
- * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the
- * previous wakeup latency values for this device.  To remove the
- * wakeup latency restriction for this device, call with t = -1.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
-				   long t);
-
-
-/**
- * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency
- * @dev: struct device *
- * @t: maximum DMA transfer start latency in microseconds
- *
- * Request that the maximum system DMA transfer start latency for this
- * device 'dev' should be no greater than 't' microseconds.  "DMA
- * transfer start latency" here is defined as the elapsed time from
- * when a device (e.g., McBSP) requests that a system DMA transfer
- * start or continue, to the time at which data starts to flow into
- * that device from the system DMA controller.
- *
- * It is intended that underlying PM code will use this information to
- * determine what power state to put the CORE powerdomain into.
- *
- * Since system DMA transfers may not involve the MPU, this function
- * will not affect MPU wakeup latency.  Use set_max_cpu_lat() to do
- * so.  Similarly, this function will not affect device wakeup latency
- * -- use set_max_dev_wakeup_lat() to affect that.
- *
- * Multiple calls to set_max_sdma_lat() will replace the previous t
- * value for this device.  To remove the maximum DMA latency for this
- * device, call with t = -1.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_max_sdma_lat(struct device *dev, long t);
-
-
-/**
- * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev
- * @dev: struct device * requesting the constraint
- * @clk: struct clk * to set the minimum rate constraint on
- * @r: minimum rate in Hz
- *
- * Request that the minimum clock rate on the device @dev's clk @clk
- * be no less than @r Hz.
- *
- * It is expected that the OMAP PM code will use this information to
- * find an OPP or clock setting that will satisfy this clock rate
- * constraint, along with any other applicable system constraints on
- * the clock rate or corresponding voltage, etc.
- *
- * omap_pm_set_min_clk_rate() differs from the clock code's
- * clk_set_rate() in that it considers other constraints before taking
- * any hardware action, and may change a system OPP rather than just a
- * clock rate.  clk_set_rate() is intended to be a low-level
- * interface.
- *
- * omap_pm_set_min_clk_rate() is easily open to abuse.  A better API
- * would be something like "omap_pm_set_min_dev_performance()";
- * however, there is no easily-generalizable concept of performance
- * that applies to all devices.  Only a device (and possibly the
- * device subsystem) has both the subsystem-specific knowledge, and
- * the hardware IP block-specific knowledge, to translate a constraint
- * on "touchscreen sampling accuracy" or "number of pixels or polygons
- * rendered per second" to a clock rate.  This translation can be
- * dependent on the hardware IP block's revision, or firmware version,
- * and the driver is the only code on the system that has this
- * information and can know how to translate that into a clock rate.
- *
- * The intended use-case for this function is for userspace or other
- * kernel code to communicate a particular performance requirement to
- * a subsystem; then for the subsystem to communicate that requirement
- * to something that is meaningful to the device driver; then for the
- * device driver to convert that requirement to a clock rate, and to
- * then call omap_pm_set_min_clk_rate().
- *
- * Users of this function (such as device drivers) should not simply
- * call this function with some high clock rate to ensure "high
- * performance."  Rather, the device driver should take a performance
- * constraint from its subsystem, such as "render at least X polygons
- * per second," and use some formula or table to convert that into a
- * clock rate constraint given the hardware type and hardware
- * revision.  Device drivers or subsystems should not assume that they
- * know how to make a power/performance tradeoff - some device use
- * cases may tolerate a lower-fidelity device function for lower power
- * consumption; others may demand a higher-fidelity device function,
- * no matter what the power consumption.
- *
- * Multiple calls to omap_pm_set_min_clk_rate() will replace the
- * previous rate value for the device @dev.  To remove the minimum clock
- * rate constraint for the device, call with r = 0.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r);
-
-/*
- * DSP Bridge-specific constraints
- */
-
-/**
- * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table
- *
- * Intended for use by DSPBridge.  Returns an array of OPP->DSP clock
- * frequency entries.  The final item in the array should have .rate =
- * .opp_id = 0.
- */
-const struct omap_opp *omap_pm_dsp_get_opp_table(void);
-
-/**
- * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge
- * @opp_id: target DSP OPP ID
- *
- * Set a minimum OPP ID for the DSP.  This is intended to be called
- * only from the DSP Bridge MPU-side driver.  Unfortunately, the only
- * information that code receives from the DSP/BIOS load estimator is the
- * target OPP ID; hence, this interface.  No return value.
- */
-void omap_pm_dsp_set_min_opp(u8 opp_id);
-
-/**
- * omap_pm_dsp_get_opp - report the current DSP OPP ID
- *
- * Report the current OPP for the DSP.  Since on OMAP3, the DSP and
- * MPU share a single voltage domain, the OPP ID returned back may
- * represent a higher DSP speed than the OPP requested via
- * omap_pm_dsp_set_min_opp().
- *
- * Returns the current VDD1 OPP ID, or 0 upon error.
- */
-u8 omap_pm_dsp_get_opp(void);
-
-
-/*
- * CPUFreq-originated constraint
- *
- * In the future, this should be handled by custom OPP clocktype
- * functions.
- */
-
-/**
- * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr
- *
- * Provide a frequency table usable by CPUFreq for the current chip/board.
- * Returns a pointer to a struct cpufreq_frequency_table array or NULL
- * upon error.
- */
-struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void);
-
-/**
- * omap_pm_cpu_set_freq - set the current minimum MPU frequency
- * @f: MPU frequency in Hz
- *
- * Set the current minimum CPU frequency.  The actual CPU frequency
- * used could end up higher if the DSP requested a higher OPP.
- * Intended to be called by plat-omap/cpu_omap.c:omap_target().  No
- * return value.
- */
-void omap_pm_cpu_set_freq(unsigned long f);
-
-/**
- * omap_pm_cpu_get_freq - report the current CPU frequency
- *
- * Returns the current MPU frequency, or 0 upon error.
- */
-unsigned long omap_pm_cpu_get_freq(void);
-
-
-/*
- * Device context loss tracking
- */
-
-/**
- * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
- * @dev: struct device *
- *
- * This function returns the number of times that the device @dev has
- * lost its internal context.  This generally occurs on a powerdomain
- * transition to OFF.  Drivers use this as an optimization to avoid restoring
- * context if the device hasn't lost it.  To use, drivers should initially
- * call this in their context save functions and store the result.  Early in
- * the driver's context restore function, the driver should call this function
- * again, and compare the result to the stored counter.  If they differ, the
- * driver must restore device context.   If the number of context losses
- * exceeds the maximum positive integer, the function will wrap to 0 and
- * continue counting.  Returns the number of context losses for this device,
- * or negative value upon error.
- */
-int omap_pm_get_dev_context_loss_count(struct device *dev);
-
-void omap_pm_enable_off_mode(void);
-void omap_pm_disable_off_mode(void);
-
-#endif
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 3c96b567370e..198685b894b0 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -22,10 +22,8 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 
-/* Interface documentation is in mach/omap-pm.h */
-#include <plat/omap-pm.h>
-
 #include "../mach-omap2/omap_device.h"
+#include "../mach-omap2/omap-pm.h"
 
 static bool off_mode_enabled;
 static int dummy_context_loss_counter;
diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c
index 546199e9ccc7..82e6c1e282d5 100644
--- a/drivers/media/rc/ir-rx51.c
+++ b/drivers/media/rc/ir-rx51.c
@@ -28,7 +28,6 @@
 
 #include <plat/dmtimer.h>
 #include <plat/clock.h>
-#include <plat/omap-pm.h>
 
 #include <media/lirc.h>
 #include <media/lirc_dev.h>
-- 
cgit v1.2.3


From e4c060db2c13f10de09101afc564763f9fd0019a Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 5 Oct 2012 13:25:59 -0700
Subject: ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and
 mach-omap2

We want to remove plat/cpu.h. To do this, let's first split
it to private soc.h to mach-omap1 and mach-omap2. We have to
keep plat/cpu.h around until the remaining drivers are fixed,
so let's include the local soc.h in plat/cpu.h and for drivers
still including plat/cpu.h.

Once the drivers are fixed not to include plat/cpu.h, we
can remove the file.

This is needed for the ARM common zImage support.

[tony@atomide.com: updated to not print a warning]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/clock.c                 |   2 +-
 arch/arm/mach-omap1/clock_data.c            |   2 +-
 arch/arm/mach-omap1/i2c.c                   |   2 +-
 arch/arm/mach-omap1/id.c                    |   2 +-
 arch/arm/mach-omap1/include/mach/hardware.h |   2 +-
 arch/arm/mach-omap1/include/mach/memory.h   |   2 +-
 arch/arm/mach-omap1/irq.c                   |   2 +-
 arch/arm/mach-omap1/mcbsp.c                 |   2 +-
 arch/arm/mach-omap1/soc.h                   | 229 ++++++++++++
 arch/arm/mach-omap2/board-3430sdp.c         |   1 +
 arch/arm/mach-omap2/board-flash.c           |   3 +-
 arch/arm/mach-omap2/board-omap3beagle.c     |   1 +
 arch/arm/mach-omap2/board-omap3evm.c        |   1 +
 arch/arm/mach-omap2/board-zoom-display.c    |   1 +
 arch/arm/mach-omap2/clock33xx_data.c        |   2 +-
 arch/arm/mach-omap2/clockdomain.c           |   1 +
 arch/arm/mach-omap2/clockdomain.h           |   1 -
 arch/arm/mach-omap2/clockdomain2xxx_3xxx.c  |   2 +
 arch/arm/mach-omap2/clockdomains2420_data.c |   1 +
 arch/arm/mach-omap2/clockdomains2430_data.c |   1 +
 arch/arm/mach-omap2/clockdomains3xxx_data.c |   1 +
 arch/arm/mach-omap2/common.h                |   1 -
 arch/arm/mach-omap2/display.c               |   1 +
 arch/arm/mach-omap2/dma.c                   |   1 +
 arch/arm/mach-omap2/gpmc.c                  |   2 -
 arch/arm/mach-omap2/hsmmc.c                 |   1 +
 arch/arm/mach-omap2/i2c.c                   |   1 +
 arch/arm/mach-omap2/mux.c                   |   1 +
 arch/arm/mach-omap2/omap-mpuss-lowpower.c   |   1 +
 arch/arm/mach-omap2/omap_hwmod.h            |   1 -
 arch/arm/mach-omap2/omap_hwmod_33xx_data.c  |   1 -
 arch/arm/mach-omap2/omap_twl.c              |   1 +
 arch/arm/mach-omap2/opp3xxx_data.c          |   1 +
 arch/arm/mach-omap2/pm-debug.c              |   1 +
 arch/arm/mach-omap2/pm.c                    |   1 +
 arch/arm/mach-omap2/pm24xx.c                |   1 +
 arch/arm/mach-omap2/pm34xx.c                |   1 +
 arch/arm/mach-omap2/pm44xx.c                |   1 +
 arch/arm/mach-omap2/pmu.c                   |   1 +
 arch/arm/mach-omap2/powerdomain.h           |   2 -
 arch/arm/mach-omap2/powerdomains2xxx_data.c |   1 +
 arch/arm/mach-omap2/prcm.c                  |   1 +
 arch/arm/mach-omap2/serial.c                |   1 +
 arch/arm/mach-omap2/soc.h                   | 468 ++++++++++++++++++++++-
 arch/arm/mach-omap2/sr_device.c             |   2 +-
 arch/arm/mach-omap2/usb-host.c              |   1 +
 arch/arm/mach-omap2/usb-musb.c              |   3 +-
 arch/arm/plat-omap/dma.c                    |   4 +-
 arch/arm/plat-omap/i2c.c                    |   4 +-
 arch/arm/plat-omap/include/plat/cpu.h       | 562 +---------------------------
 arch/arm/plat-omap/sram.c                   |   3 +-
 51 files changed, 748 insertions(+), 584 deletions(-)
 create mode 100644 arch/arm/mach-omap1/soc.h

(limited to 'arch/arm/mach-omap2/display.c')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 4c895ef1d40f..9e74aa664acb 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -22,7 +22,7 @@
 
 #include <asm/mach-types.h>
 
-#include <plat/cpu.h>
+#include "soc.h"
 #include <plat/usb.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index c78fb913ee64..28aea55a412e 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,7 +22,7 @@
 
 #include <asm/mach-types.h>  /* for machine_is_* */
 
-#include <plat/cpu.h>
+#include "soc.h"
 
 #include <mach/hardware.h>
 #include <mach/usb.h>   /* for OTG_BASE */
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index a6f465a44642..32bcbb8d6c73 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -21,7 +21,7 @@
 
 #include <linux/i2c-omap.h>
 #include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
 
 #include "../plat-omap/i2c.h"
 
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index a1b846aacdaf..52de382fc804 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <asm/system_info.h>
 
-#include <plat/cpu.h>
+#include "soc.h"
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index 2e60265779c8..f9989d38c464 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -39,7 +39,7 @@
 #include <asm/sizes.h>
 #ifndef __ASSEMBLER__
 #include <asm/types.h>
-#include <plat/cpu.h>
+#include "../../mach-omap1/soc.h"
 
 /*
  * NOTE: Please use ioremap + __raw_read/write where possible instead of these
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index 901082def9bd..351ae4f2c514 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -19,7 +19,7 @@
  * because of the strncmp().
  */
 #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <plat/cpu.h>
+#include "../../mach-omap1/soc.h"
 
 /*
  * OMAP-1510 Local Bus address offset
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 6995fb6a3345..122ef67939a2 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -45,7 +45,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <plat/cpu.h>
+#include "soc.h"
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 3d461e1b8577..c6d8fdf92e9c 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -21,7 +21,7 @@
 
 #include <plat-omap/dma-omap.h>
 #include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h
new file mode 100644
index 000000000000..6cf9c1cc2bef
--- /dev/null
+++ b/arch/arm/mach-omap1/soc.h
@@ -0,0 +1,229 @@
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+
+/*
+ * omap_rev bits:
+ * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
+ * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():	True for OMAP730, OMAP850
+ * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
+ */
+#define GET_OMAP_CLASS	(omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id)			\
+static inline int is_omap ##class (void)		\
+{							\
+	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
+}
+
+#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)			\
+static inline int is_omap ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+
+#define cpu_is_omap7xx()		0
+#define cpu_is_omap15xx()		0
+#define cpu_is_omap16xx()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap310():	True for OMAP310
+ * cpu_is_omap1510():	True for OMAP1510
+ * cpu_is_omap1610():	True for OMAP1610
+ * cpu_is_omap1611():	True for OMAP1611
+ * cpu_is_omap5912():	True for OMAP5912
+ * cpu_is_omap1621():	True for OMAP1621
+ * cpu_is_omap1710():	True for OMAP1710
+ */
+#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+
+#define cpu_is_omap310()		0
+#define cpu_is_omap1510()		0
+#define cpu_is_omap1610()		0
+#define cpu_is_omap5912()		0
+#define cpu_is_omap1611()		0
+#define cpu_is_omap1621()		0
+#define cpu_is_omap1710()		0
+
+/* These are needed to compile common code */
+#ifdef CONFIG_ARCH_OMAP1
+#define cpu_is_omap242x()		0
+#define cpu_is_omap2430()		0
+#define cpu_is_omap243x()		0
+#define cpu_is_omap24xx()		0
+#define cpu_is_omap34xx()		0
+#define cpu_is_omap44xx()		0
+#define soc_is_omap54xx()		0
+#define soc_is_am33xx()			0
+#define cpu_class_is_omap1()		1
+#define cpu_class_is_omap2()		0
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 310 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()		is_omap310()
+# define cpu_is_omap1510()		is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
+# define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap1611()		is_omap1611()
+# define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1621()		is_omap1621()
+# define cpu_is_omap1710()		is_omap1710()
+#endif
+
+#endif	/* __ASSEMBLY__ */
+#endif
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 3e8725b73161..d2a419fcfce3 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -39,6 +39,7 @@
 #include "gpmc.h"
 #include "gpmc-smc91x.h"
 
+#include "soc.h"
 #include "board-flash.h"
 #include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index d3b6155b9e29..c33adea0247c 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -17,11 +17,10 @@
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
 
-#include <plat/cpu.h>
-#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 
+#include "soc.h"
 #include "common.h"
 #include "board-flash.h"
 #include "gpmc-onenand.h"
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 2064917874a7..a5497ce0a6c8 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -46,6 +46,7 @@
 #include <plat/usb.h>
 #include "omap_device.h"
 
+#include "soc.h"
 #include "mux.h"
 #include "hsmmc.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 1d8e926b52fe..8479779fd346 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -52,6 +52,7 @@
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 
+#include "soc.h"
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index 230cb33b33ee..1c7c834a5b5f 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -18,6 +18,7 @@
 #include <video/omapdss.h>
 #include "board-zoom.h"
 
+#include "soc.h"
 #include "common.h"
 
 #define LCD_PANEL_RESET_GPIO_PROD	96
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 26b06a90820c..1cb79cc58089 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -18,7 +18,7 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 
-#include "am33xx.h"
+#include "soc.h"
 #include "iomap.h"
 #include "control.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 32dbcbc3ee6d..467567ad526a 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -27,6 +27,7 @@
 
 #include <linux/bitops.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "clockdomain.h"
 
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 53e8ba06620b..bc42446e23ab 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -20,7 +20,6 @@
 #include "powerdomain.h"
 #include "clock.h"
 #include "omap_hwmod.h"
-#include <plat/cpu.h>
 
 /*
  * Clockdomain flags
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index 70294f54e35a..3e4e9209b2df 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -14,6 +14,8 @@
 
 #include <linux/types.h>
 #include <plat/prcm.h>
+
+#include "soc.h"
 #include "prm.h"
 #include "prm2xxx_3xxx.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
index 5c741852fac0..7e76becf3a4a 100644
--- a/arch/arm/mach-omap2/clockdomains2420_data.c
+++ b/arch/arm/mach-omap2/clockdomains2420_data.c
@@ -35,6 +35,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
+#include "soc.h"
 #include "clockdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
index f09617555e15..b923007e45d0 100644
--- a/arch/arm/mach-omap2/clockdomains2430_data.c
+++ b/arch/arm/mach-omap2/clockdomains2430_data.c
@@ -35,6 +35,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
+#include "soc.h"
 #include "clockdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
index 933a35cd124a..e6b91e552d3d 100644
--- a/arch/arm/mach-omap2/clockdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -33,6 +33,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
+#include "soc.h"
 #include "clockdomain.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 42b1b2e009d3..d135d551d124 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -34,7 +34,6 @@
 
 #include <asm/proc-fns.h>
 
-#include <plat/cpu.h>
 #include <plat/serial.h>
 
 #include "../plat-omap/common.h"
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 9aaaf4e03ca3..89c57129357a 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -30,6 +30,7 @@
 #include "omap-pm.h"
 #include "common.h"
 
+#include "soc.h"
 #include "iomap.h"
 #include "mux.h"
 #include "control.h"
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index bc9a4e941e59..b1926cd70468 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -30,6 +30,7 @@
 
 #include <plat-omap/dma-omap.h>
 
+#include "soc.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
 
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 7dff7ffcb7ee..6af1a5d98e6f 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -30,8 +30,6 @@
 
 #include <asm/mach-types.h>
 
-#include <plat/cpu.h>
-
 #include "soc.h"
 #include "common.h"
 #include "omap_device.h"
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index ddbf2eb6ba5b..e3406dce59be 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -17,6 +17,7 @@
 #include <mach/hardware.h>
 #include <linux/platform_data/gpio-omap.h>
 
+#include "soc.h"
 #include "omap_device.h"
 #include "omap-pm.h"
 
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 8b3993724a1b..ad55b943108f 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -19,6 +19,7 @@
  *
  */
 
+#include "soc.h"
 #include "common.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 635d5ef9551c..26126343d6ac 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -38,6 +38,7 @@
 
 #include "omap_hwmod.h"
 
+#include "soc.h"
 #include "control.h"
 #include "mux.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index ff4e6a0e9c7c..3f5fd7e3549d 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -50,6 +50,7 @@
 #include <asm/suspend.h>
 #include <asm/hardware/cache-l2x0.h>
 
+#include "soc.h"
 #include "common.h"
 #include "omap44xx.h"
 #include "omap4-sar-layout.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index b3349f7b1a2c..87b59b45c678 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -35,7 +35,6 @@
 #include <linux/list.h>
 #include <linux/ioport.h>
 #include <linux/spinlock.h>
-#include <plat/cpu.h>
 
 struct omap_device;
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 60ed43531079..ad8d43b33273 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -17,7 +17,6 @@
 #include <linux/i2c-omap.h>
 
 #include "omap_hwmod.h"
-#include <plat/cpu.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index f515a1a056d5..2bf35dc091be 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/i2c/twl.h>
 
+#include "soc.h"
 #include "voltage.h"
 
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index 75cef5f67a8a..62772e0e0d69 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -19,6 +19,7 @@
  */
 #include <linux/module.h>
 
+#include "soc.h"
 #include "control.h"
 #include "omap_opp_data.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 140eb7939e60..3cf4fdfd7ab0 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -33,6 +33,7 @@
 #include <plat/dmtimer.h>
 #include "omap-pm.h"
 
+#include "soc.h"
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index e66855ef4c78..331478f9b864 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -24,6 +24,7 @@
 #include "omap_device.h"
 #include "common.h"
 
+#include "soc.h"
 #include "prcm-common.h"
 #include "voltage.h"
 #include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index be8989e6d78c..6d17e044ffb8 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -40,6 +40,7 @@
 
 #include "../plat-omap/sram.h"
 
+#include "soc.h"
 #include "common.h"
 #include "clock.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a08e87eafbeb..160fa250c41e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -42,6 +42,7 @@
 
 #include "../plat-omap/sram.h"
 
+#include "soc.h"
 #include "common.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 04922d149068..7da75aed1514 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <asm/system_misc.h>
 
+#include "soc.h"
 #include "common.h"
 #include "clockdomain.h"
 #include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index 98c5969acf6d..3cf79b54ce61 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -15,6 +15,7 @@
 
 #include <asm/pmu.h>
 
+#include "soc.h"
 #include "omap_hwmod.h"
 #include "omap_device.h"
 
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index baee90608d11..5277d56eb37f 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -22,8 +22,6 @@
 
 #include <linux/atomic.h>
 
-#include <plat/cpu.h>
-
 #include "voltage.h"
 
 /* Powerdomain basic power states */
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
index 2385c1f009ee..ba520d4f7c7b 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
+#include "soc.h"
 #include "powerdomain.h"
 #include "powerdomains2xxx_3xxx_data.h"
 
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 0f51e034e0aa..cff270a178c5 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -28,6 +28,7 @@
 #include "common.h"
 #include <plat/prcm.h>
 
+#include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index a3da4654de97..12363f313f08 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -35,6 +35,7 @@
 #include "omap_hwmod.h"
 #include "omap_device.h"
 #include "omap-pm.h"
+#include "soc.h"
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index fc9b96daf851..070096496e20 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -1,7 +1,473 @@
-#include <plat/cpu.h>
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
 #include "omap24xx.h"
 #include "omap34xx.h"
 #include "omap44xx.h"
 #include "ti81xx.h"
 #include "am33xx.h"
 #include "omap54xx.h"
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_SOC_OMAP2420
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_SOC_OMAP2430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap4
+# endif
+#endif
+
+#ifdef CONFIG_SOC_OMAP5
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap5
+# endif
+#endif
+
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME am33xx
+# endif
+#endif
+
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST		0
+#define OMAP2_DEVICE_TYPE_EMU		1
+#define OMAP2_DEVICE_TYPE_SEC		2
+#define OMAP2_DEVICE_TYPE_GP		3
+#define OMAP2_DEVICE_TYPE_BAD		4
+
+int omap_type(void);
+
+/*
+ * omap_rev bits:
+ * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
+ * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x():	True for OMAP2430
+ * cpu_is_omap343x():	True for OMAP3430
+ * cpu_is_omap443x():	True for OMAP4430
+ * cpu_is_omap446x():	True for OMAP4460
+ * cpu_is_omap447x():	True for OMAP4470
+ * soc_is_omap543x():	True for OMAP5430, OMAP5432
+ */
+#define GET_OMAP_CLASS	(omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id)			\
+static inline int is_omap ##class (void)		\
+{							\
+	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
+}
+
+#define GET_AM_CLASS	((omap_rev() >> 24) & 0xff)
+
+#define IS_AM_CLASS(class, id)				\
+static inline int is_am ##class (void)			\
+{							\
+	return (GET_AM_CLASS == (id)) ? 1 : 0;		\
+}
+
+#define GET_TI_CLASS	((omap_rev() >> 24) & 0xff)
+
+#define IS_TI_CLASS(class, id)			\
+static inline int is_ti ##class (void)		\
+{							\
+	return (GET_TI_CLASS == (id)) ? 1 : 0;	\
+}
+
+#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)			\
+static inline int is_omap ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
+#define IS_TI_SUBCLASS(subclass, id)			\
+static inline int is_ti ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
+#define IS_AM_SUBCLASS(subclass, id)			\
+static inline int is_am ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+IS_OMAP_CLASS(44xx, 0x44)
+IS_AM_CLASS(35xx, 0x35)
+IS_OMAP_CLASS(54xx, 0x54)
+IS_AM_CLASS(33xx, 0x33)
+
+IS_TI_CLASS(81xx, 0x81)
+
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+IS_OMAP_SUBCLASS(363x, 0x363)
+IS_OMAP_SUBCLASS(443x, 0x443)
+IS_OMAP_SUBCLASS(446x, 0x446)
+IS_OMAP_SUBCLASS(447x, 0x447)
+IS_OMAP_SUBCLASS(543x, 0x543)
+
+IS_TI_SUBCLASS(816x, 0x816)
+IS_TI_SUBCLASS(814x, 0x814)
+IS_AM_SUBCLASS(335x, 0x335)
+
+#define cpu_is_omap24xx()		0
+#define cpu_is_omap242x()		0
+#define cpu_is_omap243x()		0
+#define cpu_is_omap34xx()		0
+#define cpu_is_omap343x()		0
+#define cpu_is_ti81xx()			0
+#define cpu_is_ti816x()			0
+#define cpu_is_ti814x()			0
+#define soc_is_am35xx()			0
+#define soc_is_am33xx()			0
+#define soc_is_am335x()			0
+#define cpu_is_omap44xx()		0
+#define cpu_is_omap443x()		0
+#define cpu_is_omap446x()		0
+#define cpu_is_omap447x()		0
+#define soc_is_omap54xx()		0
+#define soc_is_omap543x()		0
+
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP2)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()		is_omap24xx()
+# endif
+# if defined (CONFIG_SOC_OMAP2420)
+#  undef  cpu_is_omap242x
+#  define cpu_is_omap242x()		is_omap242x()
+# endif
+# if defined (CONFIG_SOC_OMAP2430)
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap243x()		is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+#  undef  cpu_is_omap34xx
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap34xx()		is_omap34xx()
+#  define cpu_is_omap343x()		is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP2)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()		1
+# endif
+# if defined(CONFIG_SOC_OMAP2420)
+#  undef  cpu_is_omap242x
+#  define cpu_is_omap242x()		1
+# endif
+# if defined(CONFIG_SOC_OMAP2430)
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap243x()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+#  undef  cpu_is_omap34xx
+#  define cpu_is_omap34xx()		1
+# endif
+# if defined(CONFIG_SOC_OMAP3430)
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap343x()		1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap2420():	True for OMAP2420
+ * cpu_is_omap2422():	True for OMAP2422
+ * cpu_is_omap2423():	True for OMAP2423
+ * cpu_is_omap2430():	True for OMAP2430
+ * cpu_is_omap3430():	True for OMAP3430
+ */
+#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+
+#define cpu_is_omap2420()		0
+#define cpu_is_omap2422()		0
+#define cpu_is_omap2423()		0
+#define cpu_is_omap2430()		0
+#define cpu_is_omap3430()		0
+#define cpu_is_omap3630()		0
+#define soc_is_omap5430()		0
+
+/* These are needed for the common code */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define cpu_is_omap7xx()		0
+#define cpu_is_omap15xx()		0
+#define cpu_is_omap16xx()		0
+#define cpu_is_omap1510()		0
+#define cpu_is_omap1610()		0
+#define cpu_is_omap1611()		0
+#define cpu_is_omap1621()		0
+#define cpu_is_omap1710()		0
+#define cpu_class_is_omap1()		0
+#define cpu_class_is_omap2()		1
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2)
+# undef  cpu_is_omap2420
+# undef  cpu_is_omap2422
+# undef  cpu_is_omap2423
+# undef  cpu_is_omap2430
+# define cpu_is_omap2420()		is_omap2420()
+# define cpu_is_omap2422()		is_omap2422()
+# define cpu_is_omap2423()		is_omap2423()
+# define cpu_is_omap2430()		is_omap2430()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap3430
+# undef cpu_is_ti81xx
+# undef cpu_is_ti816x
+# undef cpu_is_ti814x
+# undef soc_is_am35xx
+# define cpu_is_omap3430()		is_omap3430()
+# undef cpu_is_omap3630
+# define cpu_is_omap3630()		is_omap363x()
+# define cpu_is_ti81xx()		is_ti81xx()
+# define cpu_is_ti816x()		is_ti816x()
+# define cpu_is_ti814x()		is_ti814x()
+# define soc_is_am35xx()		is_am35xx()
+#endif
+
+# if defined(CONFIG_SOC_AM33XX)
+# undef soc_is_am33xx
+# undef soc_is_am335x
+# define soc_is_am33xx()		is_am33xx()
+# define soc_is_am335x()		is_am335x()
+#endif
+
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# undef cpu_is_omap446x
+# undef cpu_is_omap447x
+# define cpu_is_omap44xx()		is_omap44xx()
+# define cpu_is_omap443x()		is_omap443x()
+# define cpu_is_omap446x()		is_omap446x()
+# define cpu_is_omap447x()		is_omap447x()
+# endif
+
+# if defined(CONFIG_SOC_OMAP5)
+# undef soc_is_omap54xx
+# undef soc_is_omap543x
+# define soc_is_omap54xx()		is_omap54xx()
+# define soc_is_omap543x()		is_omap543x()
+#endif
+
+/* Various silicon revisions for omap2 */
+#define OMAP242X_CLASS		0x24200024
+#define OMAP2420_REV_ES1_0	OMAP242X_CLASS
+#define OMAP2420_REV_ES2_0	(OMAP242X_CLASS | (0x1 << 8))
+
+#define OMAP243X_CLASS		0x24300024
+#define OMAP2430_REV_ES1_0	OMAP243X_CLASS
+
+#define OMAP343X_CLASS		0x34300034
+#define OMAP3430_REV_ES1_0	OMAP343X_CLASS
+#define OMAP3430_REV_ES2_0	(OMAP343X_CLASS | (0x1 << 8))
+#define OMAP3430_REV_ES2_1	(OMAP343X_CLASS | (0x2 << 8))
+#define OMAP3430_REV_ES3_0	(OMAP343X_CLASS | (0x3 << 8))
+#define OMAP3430_REV_ES3_1	(OMAP343X_CLASS | (0x4 << 8))
+#define OMAP3430_REV_ES3_1_2	(OMAP343X_CLASS | (0x5 << 8))
+
+#define OMAP363X_CLASS		0x36300034
+#define OMAP3630_REV_ES1_0	OMAP363X_CLASS
+#define OMAP3630_REV_ES1_1	(OMAP363X_CLASS | (0x1 << 8))
+#define OMAP3630_REV_ES1_2	(OMAP363X_CLASS | (0x2 << 8))
+
+#define TI816X_CLASS		0x81600034
+#define TI8168_REV_ES1_0	TI816X_CLASS
+#define TI8168_REV_ES1_1	(TI816X_CLASS | (0x1 << 8))
+
+#define TI814X_CLASS		0x81400034
+#define TI8148_REV_ES1_0	TI814X_CLASS
+#define TI8148_REV_ES2_0	(TI814X_CLASS | (0x1 << 8))
+#define TI8148_REV_ES2_1	(TI814X_CLASS | (0x2 << 8))
+
+#define AM35XX_CLASS		0x35170034
+#define AM35XX_REV_ES1_0	AM35XX_CLASS
+#define AM35XX_REV_ES1_1	(AM35XX_CLASS | (0x1 << 8))
+
+#define AM335X_CLASS		0x33500033
+#define AM335X_REV_ES1_0	AM335X_CLASS
+
+#define OMAP443X_CLASS		0x44300044
+#define OMAP4430_REV_ES1_0	(OMAP443X_CLASS | (0x10 << 8))
+#define OMAP4430_REV_ES2_0	(OMAP443X_CLASS | (0x20 << 8))
+#define OMAP4430_REV_ES2_1	(OMAP443X_CLASS | (0x21 << 8))
+#define OMAP4430_REV_ES2_2	(OMAP443X_CLASS | (0x22 << 8))
+#define OMAP4430_REV_ES2_3	(OMAP443X_CLASS | (0x23 << 8))
+
+#define OMAP446X_CLASS		0x44600044
+#define OMAP4460_REV_ES1_0	(OMAP446X_CLASS | (0x10 << 8))
+#define OMAP4460_REV_ES1_1	(OMAP446X_CLASS | (0x11 << 8))
+
+#define OMAP447X_CLASS		0x44700044
+#define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
+
+#define OMAP54XX_CLASS		0x54000054
+#define OMAP5430_REV_ES1_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES1_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+
+void omap2xxx_check_revision(void);
+void omap3xxx_check_revision(void);
+void omap4xxx_check_revision(void);
+void omap5xxx_check_revision(void);
+void omap3xxx_check_features(void);
+void ti81xx_check_features(void);
+void omap4xxx_check_features(void);
+
+/*
+ * Runtime detection of OMAP3 features
+ *
+ * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
+ *    family have OS-level control over the I/O chain clock.  This is
+ *    to avoid a window during which wakeups could potentially be lost
+ *    during powerdomain transitions.  If this bit is set, it
+ *    indicates that the chip does support OS-level control of this
+ *    feature.
+ */
+extern u32 omap_features;
+
+#define OMAP3_HAS_L2CACHE		BIT(0)
+#define OMAP3_HAS_IVA			BIT(1)
+#define OMAP3_HAS_SGX			BIT(2)
+#define OMAP3_HAS_NEON			BIT(3)
+#define OMAP3_HAS_ISP			BIT(4)
+#define OMAP3_HAS_192MHZ_CLK		BIT(5)
+#define OMAP3_HAS_IO_WAKEUP		BIT(6)
+#define OMAP3_HAS_SDRC			BIT(7)
+#define OMAP3_HAS_IO_CHAIN_CTRL		BIT(8)
+#define OMAP4_HAS_MPU_1GHZ		BIT(9)
+#define OMAP4_HAS_MPU_1_2GHZ		BIT(10)
+#define OMAP4_HAS_MPU_1_5GHZ		BIT(11)
+
+
+#define OMAP3_HAS_FEATURE(feat,flag)			\
+static inline unsigned int omap3_has_ ##feat(void)	\
+{							\
+	return omap_features & OMAP3_HAS_ ##flag;	\
+}							\
+
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
+OMAP3_HAS_FEATURE(sgx, SGX)
+OMAP3_HAS_FEATURE(iva, IVA)
+OMAP3_HAS_FEATURE(neon, NEON)
+OMAP3_HAS_FEATURE(isp, ISP)
+OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
+OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
+OMAP3_HAS_FEATURE(sdrc, SDRC)
+OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
+
+/*
+ * Runtime detection of OMAP4 features
+ */
+#define OMAP4_HAS_FEATURE(feat, flag)			\
+static inline unsigned int omap4_has_ ##feat(void)	\
+{							\
+	return omap_features & OMAP4_HAS_ ##flag;	\
+}							\
+
+OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
+OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
+OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
+
+#endif	/* __ASSEMBLY__ */
+
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 1536aa8fffcf..b0e77a407047 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -23,8 +23,8 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 
+#include "soc.h"
 #include "omap_device.h"
-
 #include "voltage.h"
 #include "control.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 84d82280d291..4fe67129643d 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -26,6 +26,7 @@
 #include <asm/io.h>
 
 #include <plat/usb.h>
+#include "soc.h"
 #include "omap_device.h"
 
 #include "mux.h"
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 24f300a34904..07f385a2900c 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,8 +28,7 @@
 #include <plat/usb.h>
 #include "omap_device.h"
 
-#include "am35xx.h"
-
+#include "soc.h"
 #include "mux.h"
 
 static struct musb_hdrc_config musb_config = {
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index b4dcd92a5845..49803cc18787 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -36,9 +36,11 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 
-#include <plat/cpu.h>
 #include <plat-omap/dma-omap.h>
 
+#include "../mach-omap1/soc.h"
+#include "../mach-omap2/soc.h"
+
 /*
  * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
  * channels that an instance of the SDMA IP block can support.  Used
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 37597a6bbed2..be6deb7c12ec 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -32,7 +32,9 @@
 #include <linux/clk.h>
 
 #include <mach/irqs.h>
-#include <plat/cpu.h>
+
+#include "../mach-omap1/soc.h"
+#include "../mach-omap2/soc.h"
 
 #include "i2c.h"
 
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index bfd9c5f5ee14..ba542ec8d513 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/cpu.h
- *
  * OMAP cpu type detection
  *
  * Copyright (C) 2004, 2008 Nokia Corporation
@@ -30,564 +28,12 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
 
-#ifndef __ASSEMBLY__
-
-#include <linux/bitops.h>
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap16xx
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2PLUS can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2420
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap3
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap4
-# endif
-#endif
-
-#ifdef CONFIG_SOC_OMAP5
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap5
-# endif
-#endif
-
-#ifdef CONFIG_SOC_AM33XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME am33xx
-# endif
+#ifdef CONFIG_ARCH_OMAP1
+#include "../../mach-omap1/soc.h"
 #endif
 
-/*
- * Omap device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST		0
-#define OMAP2_DEVICE_TYPE_EMU		1
-#define OMAP2_DEVICE_TYPE_SEC		2
-#define OMAP2_DEVICE_TYPE_GP		3
-#define OMAP2_DEVICE_TYPE_BAD		4
-
-int omap_type(void);
-
-/*
- * omap_rev bits:
- * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
- * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
- */
-unsigned int omap_rev(void);
-
-/*
- * Get the CPU revision for OMAP devices
- */
-#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx():	True for OMAP730, OMAP850
- * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x():	True for OMAP2430
- * cpu_is_omap343x():	True for OMAP3430
- * cpu_is_omap443x():	True for OMAP4430
- * cpu_is_omap446x():	True for OMAP4460
- * cpu_is_omap447x():	True for OMAP4470
- * soc_is_omap543x():	True for OMAP5430, OMAP5432
- */
-#define GET_OMAP_CLASS	(omap_rev() & 0xff)
-
-#define IS_OMAP_CLASS(class, id)			\
-static inline int is_omap ##class (void)		\
-{							\
-	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
-}
-
-#define GET_AM_CLASS	((omap_rev() >> 24) & 0xff)
-
-#define IS_AM_CLASS(class, id)				\
-static inline int is_am ##class (void)			\
-{							\
-	return (GET_AM_CLASS == (id)) ? 1 : 0;		\
-}
-
-#define GET_TI_CLASS	((omap_rev() >> 24) & 0xff)
-
-#define IS_TI_CLASS(class, id)			\
-static inline int is_ti ##class (void)		\
-{							\
-	return (GET_TI_CLASS == (id)) ? 1 : 0;	\
-}
-
-#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id)			\
-static inline int is_omap ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-#define IS_TI_SUBCLASS(subclass, id)			\
-static inline int is_ti ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-#define IS_AM_SUBCLASS(subclass, id)			\
-static inline int is_am ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-IS_OMAP_CLASS(44xx, 0x44)
-IS_AM_CLASS(35xx, 0x35)
-IS_OMAP_CLASS(54xx, 0x54)
-IS_AM_CLASS(33xx, 0x33)
-
-IS_TI_CLASS(81xx, 0x81)
-
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-IS_OMAP_SUBCLASS(363x, 0x363)
-IS_OMAP_SUBCLASS(443x, 0x443)
-IS_OMAP_SUBCLASS(446x, 0x446)
-IS_OMAP_SUBCLASS(447x, 0x447)
-IS_OMAP_SUBCLASS(543x, 0x543)
-
-IS_TI_SUBCLASS(816x, 0x816)
-IS_TI_SUBCLASS(814x, 0x814)
-IS_AM_SUBCLASS(335x, 0x335)
-
-#define cpu_is_omap7xx()		0
-#define cpu_is_omap15xx()		0
-#define cpu_is_omap16xx()		0
-#define cpu_is_omap24xx()		0
-#define cpu_is_omap242x()		0
-#define cpu_is_omap243x()		0
-#define cpu_is_omap34xx()		0
-#define cpu_is_omap343x()		0
-#define cpu_is_ti81xx()			0
-#define cpu_is_ti816x()			0
-#define cpu_is_ti814x()			0
-#define soc_is_am35xx()			0
-#define soc_is_am33xx()			0
-#define soc_is_am335x()			0
-#define cpu_is_omap44xx()		0
-#define cpu_is_omap443x()		0
-#define cpu_is_omap446x()		0
-#define cpu_is_omap447x()		0
-#define soc_is_omap54xx()		0
-#define soc_is_omap543x()		0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		1
-# endif
-#endif
-
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		is_omap24xx()
-# endif
-# if defined (CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		is_omap242x()
-# endif
-# if defined (CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap34xx()		is_omap34xx()
-#  define cpu_is_omap343x()		is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		1
-# endif
-# if defined(CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		1
-# endif
-# if defined(CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  define cpu_is_omap34xx()		1
-# endif
-# if defined(CONFIG_SOC_OMAP3430)
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap343x()		1
-# endif
-#endif
-
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap310():	True for OMAP310
- * cpu_is_omap1510():	True for OMAP1510
- * cpu_is_omap1610():	True for OMAP1610
- * cpu_is_omap1611():	True for OMAP1611
- * cpu_is_omap5912():	True for OMAP5912
- * cpu_is_omap1621():	True for OMAP1621
- * cpu_is_omap1710():	True for OMAP1710
- * cpu_is_omap2420():	True for OMAP2420
- * cpu_is_omap2422():	True for OMAP2422
- * cpu_is_omap2423():	True for OMAP2423
- * cpu_is_omap2430():	True for OMAP2430
- * cpu_is_omap3430():	True for OMAP3430
- */
-#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id)				\
-static inline int is_omap ##type (void)			\
-{							\
-	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-
-#define cpu_is_omap310()		0
-#define cpu_is_omap1510()		0
-#define cpu_is_omap1610()		0
-#define cpu_is_omap5912()		0
-#define cpu_is_omap1611()		0
-#define cpu_is_omap1621()		0
-#define cpu_is_omap1710()		0
-#define cpu_is_omap2420()		0
-#define cpu_is_omap2422()		0
-#define cpu_is_omap2423()		0
-#define cpu_is_omap2430()		0
-#define cpu_is_omap3430()		0
-#define cpu_is_omap3630()		0
-#define soc_is_omap5430()		0
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 310 vs. 1510 and 1611B/5912 vs. 1710.
- */
-
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef  cpu_is_omap310
-# undef  cpu_is_omap1510
-# define cpu_is_omap310()		is_omap310()
-# define cpu_is_omap1510()		is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef  cpu_is_omap1610
-# undef  cpu_is_omap1611
-# undef  cpu_is_omap5912
-# undef  cpu_is_omap1621
-# undef  cpu_is_omap1710
-# define cpu_is_omap1610()		is_omap1610()
-# define cpu_is_omap1611()		is_omap1611()
-# define cpu_is_omap5912()		is_omap5912()
-# define cpu_is_omap1621()		is_omap1621()
-# define cpu_is_omap1710()		is_omap1710()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-# undef  cpu_is_omap2420
-# undef  cpu_is_omap2422
-# undef  cpu_is_omap2423
-# undef  cpu_is_omap2430
-# define cpu_is_omap2420()		is_omap2420()
-# define cpu_is_omap2422()		is_omap2422()
-# define cpu_is_omap2423()		is_omap2423()
-# define cpu_is_omap2430()		is_omap2430()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap3430
-# undef cpu_is_ti81xx
-# undef cpu_is_ti816x
-# undef cpu_is_ti814x
-# undef soc_is_am35xx
-# define cpu_is_omap3430()		is_omap3430()
-# undef cpu_is_omap3630
-# define cpu_is_omap3630()		is_omap363x()
-# define cpu_is_ti81xx()		is_ti81xx()
-# define cpu_is_ti816x()		is_ti816x()
-# define cpu_is_ti814x()		is_ti814x()
-# define soc_is_am35xx()		is_am35xx()
-#endif
-
-# if defined(CONFIG_SOC_AM33XX)
-# undef soc_is_am33xx
-# undef soc_is_am335x
-# define soc_is_am33xx()		is_am33xx()
-# define soc_is_am335x()		is_am335x()
-#endif
-
-# if defined(CONFIG_ARCH_OMAP4)
-# undef cpu_is_omap44xx
-# undef cpu_is_omap443x
-# undef cpu_is_omap446x
-# undef cpu_is_omap447x
-# define cpu_is_omap44xx()		is_omap44xx()
-# define cpu_is_omap443x()		is_omap443x()
-# define cpu_is_omap446x()		is_omap446x()
-# define cpu_is_omap447x()		is_omap447x()
-# endif
-
-# if defined(CONFIG_SOC_OMAP5)
-# undef soc_is_omap54xx
-# undef soc_is_omap543x
-# define soc_is_omap54xx()		is_omap54xx()
-# define soc_is_omap543x()		is_omap543x()
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#include "../../mach-omap2/soc.h"
 #endif
 
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
-				cpu_is_omap16xx())
-#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx() || soc_is_omap54xx() || \
-				soc_is_am33xx())
-
-/* Various silicon revisions for omap2 */
-#define OMAP242X_CLASS		0x24200024
-#define OMAP2420_REV_ES1_0	OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0	(OMAP242X_CLASS | (0x1 << 8))
-
-#define OMAP243X_CLASS		0x24300024
-#define OMAP2430_REV_ES1_0	OMAP243X_CLASS
-
-#define OMAP343X_CLASS		0x34300034
-#define OMAP3430_REV_ES1_0	OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0	(OMAP343X_CLASS | (0x1 << 8))
-#define OMAP3430_REV_ES2_1	(OMAP343X_CLASS | (0x2 << 8))
-#define OMAP3430_REV_ES3_0	(OMAP343X_CLASS | (0x3 << 8))
-#define OMAP3430_REV_ES3_1	(OMAP343X_CLASS | (0x4 << 8))
-#define OMAP3430_REV_ES3_1_2	(OMAP343X_CLASS | (0x5 << 8))
-
-#define OMAP363X_CLASS		0x36300034
-#define OMAP3630_REV_ES1_0	OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1	(OMAP363X_CLASS | (0x1 << 8))
-#define OMAP3630_REV_ES1_2	(OMAP363X_CLASS | (0x2 << 8))
-
-#define TI816X_CLASS		0x81600034
-#define TI8168_REV_ES1_0	TI816X_CLASS
-#define TI8168_REV_ES1_1	(TI816X_CLASS | (0x1 << 8))
-
-#define TI814X_CLASS		0x81400034
-#define TI8148_REV_ES1_0	TI814X_CLASS
-#define TI8148_REV_ES2_0	(TI814X_CLASS | (0x1 << 8))
-#define TI8148_REV_ES2_1	(TI814X_CLASS | (0x2 << 8))
-
-#define AM35XX_CLASS		0x35170034
-#define AM35XX_REV_ES1_0	AM35XX_CLASS
-#define AM35XX_REV_ES1_1	(AM35XX_CLASS | (0x1 << 8))
-
-#define AM335X_CLASS		0x33500033
-#define AM335X_REV_ES1_0	AM335X_CLASS
-
-#define OMAP443X_CLASS		0x44300044
-#define OMAP4430_REV_ES1_0	(OMAP443X_CLASS | (0x10 << 8))
-#define OMAP4430_REV_ES2_0	(OMAP443X_CLASS | (0x20 << 8))
-#define OMAP4430_REV_ES2_1	(OMAP443X_CLASS | (0x21 << 8))
-#define OMAP4430_REV_ES2_2	(OMAP443X_CLASS | (0x22 << 8))
-#define OMAP4430_REV_ES2_3	(OMAP443X_CLASS | (0x23 << 8))
-
-#define OMAP446X_CLASS		0x44600044
-#define OMAP4460_REV_ES1_0	(OMAP446X_CLASS | (0x10 << 8))
-#define OMAP4460_REV_ES1_1	(OMAP446X_CLASS | (0x11 << 8))
-
-#define OMAP447X_CLASS		0x44700044
-#define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
-
-#define OMAP54XX_CLASS		0x54000054
-#define OMAP5430_REV_ES1_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
-#define OMAP5432_REV_ES1_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
-
-void omap2xxx_check_revision(void);
-void omap3xxx_check_revision(void);
-void omap4xxx_check_revision(void);
-void omap5xxx_check_revision(void);
-void omap3xxx_check_features(void);
-void ti81xx_check_features(void);
-void omap4xxx_check_features(void);
-
-/*
- * Runtime detection of OMAP3 features
- *
- * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
- *    family have OS-level control over the I/O chain clock.  This is
- *    to avoid a window during which wakeups could potentially be lost
- *    during powerdomain transitions.  If this bit is set, it
- *    indicates that the chip does support OS-level control of this
- *    feature.
- */
-extern u32 omap_features;
-
-#define OMAP3_HAS_L2CACHE		BIT(0)
-#define OMAP3_HAS_IVA			BIT(1)
-#define OMAP3_HAS_SGX			BIT(2)
-#define OMAP3_HAS_NEON			BIT(3)
-#define OMAP3_HAS_ISP			BIT(4)
-#define OMAP3_HAS_192MHZ_CLK		BIT(5)
-#define OMAP3_HAS_IO_WAKEUP		BIT(6)
-#define OMAP3_HAS_SDRC			BIT(7)
-#define OMAP3_HAS_IO_CHAIN_CTRL		BIT(8)
-#define OMAP4_HAS_MPU_1GHZ		BIT(9)
-#define OMAP4_HAS_MPU_1_2GHZ		BIT(10)
-#define OMAP4_HAS_MPU_1_5GHZ		BIT(11)
-
-
-#define OMAP3_HAS_FEATURE(feat,flag)			\
-static inline unsigned int omap3_has_ ##feat(void)	\
-{							\
-	return omap_features & OMAP3_HAS_ ##flag;	\
-}							\
-
-OMAP3_HAS_FEATURE(l2cache, L2CACHE)
-OMAP3_HAS_FEATURE(sgx, SGX)
-OMAP3_HAS_FEATURE(iva, IVA)
-OMAP3_HAS_FEATURE(neon, NEON)
-OMAP3_HAS_FEATURE(isp, ISP)
-OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
-OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
-OMAP3_HAS_FEATURE(sdrc, SDRC)
-OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
-
-/*
- * Runtime detection of OMAP4 features
- */
-#define OMAP4_HAS_FEATURE(feat, flag)			\
-static inline unsigned int omap4_has_ ##feat(void)	\
-{							\
-	return omap_features & OMAP4_HAS_ ##flag;	\
-}							\
-
-OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
-OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
-OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
-
-#endif	/* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index dc2d800d9598..70dcc225157f 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -25,7 +25,8 @@
 
 #include <asm/mach/map.h>
 
-#include <plat/cpu.h>
+#include "../mach-omap1/soc.h"
+#include "../mach-omap2/soc.h"
 
 #include "sram.h"
 
-- 
cgit v1.2.3