From f7519d8c8290765a9408a52db4ba4a368ff72ca5 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 20 Dec 2011 22:54:18 +0100 Subject: ARM: OMAP1: ams-delta: register latch dependent devices later In preparation to converting Amstrad Delta on-board latches to basic_mmio_gpio devices, registration of platform devices which depend on latches and will require initialization of their GPIO pins first, should be moved out of .machine_init down to late_initcall level, as the gpio-generic driver is not available until device_initcall time. The latch reset operation, which will be replaced with GPIO initialization, must also be moved to late_initcall for the same reason. Since there was already another, separate arch_initcall function for setting up one of those latch dependent devices, the on-board modem device, reuse that function, i.e., rename it to a name that matches the new purpose, extend with other device setup relocated from .machine_init, and move down to the late_initcall level. While being at it, add missing gpio_free() in case the modem platform device registration fails. Thanks to Tony Lindgren who suggested this approach instead of shifting up the gpio-generic driver initialization. In addition, defer registration of the Amstrad Delta ASoC and serio devices, done from their device driver files, until late_initcall time, as those drivers will depend on their GPIO pins already requested from the board late_init() function until updated to register their GPIO pins themselves. Signed-off-by: Janusz Krzysztofik Acked-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index b0f15d234a12..50987c91690f 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -275,11 +275,14 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { }; static struct platform_device *ams_delta_devices[] __initdata = { - &ams_delta_nand_device, &ams_delta_kp_device, + &ams_delta_camera_device, +}; + +static struct platform_device *late_devices[] __initdata = { + &ams_delta_nand_device, &ams_delta_lcd_device, &ams_delta_led_device, - &ams_delta_camera_device, }; static void __init ams_delta_init(void) @@ -307,9 +310,6 @@ static void __init ams_delta_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - /* Clear latch2 (NAND, LCD, modem enable) */ - ams_delta_latch2_write(~0, 0); - omap1_usb_init(&ams_delta_usb_config); omap1_set_camera_info(&ams_delta_camera_platform_data); #ifdef CONFIG_LEDS_TRIGGERS @@ -345,13 +345,18 @@ static struct platform_device ams_delta_modem_device = { }, }; -static int __init ams_delta_modem_init(void) +static int __init late_init(void) { int err; if (!machine_is_ams_delta()) return -ENODEV; + /* Clear latch2 (NAND, LCD, modem enable) */ + ams_delta_latch2_write(~0, 0); + + platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); + omap_cfg_reg(M14_1510_GPIO2); ams_delta_modem_ports[0].irq = gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); @@ -367,9 +372,16 @@ static int __init ams_delta_modem_init(void) AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC); - return platform_device_register(&ams_delta_modem_device); + err = platform_device_register(&ams_delta_modem_device); + if (err) + goto gpio_free; + return 0; + +gpio_free: + gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + return err; } -arch_initcall(ams_delta_modem_init); +late_initcall(late_init); static void __init ams_delta_map_io(void) { -- cgit v1.2.3 From 937eb4bb00588571f223eade260f9b509bf223ab Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 20 Dec 2011 03:24:21 +0100 Subject: ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio Once ready, ams-delta specific device drivers currently calling custom ams_delta_latch[12]_write() functions can be updated to call generic gpio_set_value() instead, which will make them less platform dependent. Even more, some custom ams-delta only drivers can perhaps be dropped from the tree after converting selected ams-delta platform devices to follow generic GPIO based device models. The latch_gpios[] table is initially filled with all latch1 and latch2 GPIO pins in order to register and initialize them from the board file until those are handled by respective existing device drivers (leds, nand, lcd, serio, asoc, serial). That table will get almost empty after the transision process is completed, holding only pins not used by any drivers / connected to unused devices, in order to initialize them from the board file for power saving purposes. The new ams_delta_latch_write() function is a unified replacement for those removed ams_delta_latch[12]_write(), and serves as a temporary wrapper over gpio_set_value(), providing the old API for those not yet updated device drivers, and will be removed after all custom drivers are converted or replaced. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/Kconfig | 1 + arch/arm/mach-omap1/board-ams-delta.c | 237 +++++++++++++++++++--- arch/arm/plat-omap/include/plat/board-ams-delta.h | 43 +++- 3 files changed, 242 insertions(+), 39 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 4f8d66f044e7..e14532f236a0 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -155,6 +155,7 @@ config MACH_AMS_DELTA bool "Amstrad E3 (Delta)" depends on ARCH_OMAP1 && ARCH_OMAP15XX select FIQ + select GPIO_GENERIC_PLATFORM help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 50987c91690f..cff2711dc259 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include #include #include #include @@ -40,9 +41,6 @@ #include -static u8 ams_delta_latch1_reg; -static u16 ams_delta_latch2_reg; - static const unsigned int ams_delta_keymap[] = { KEY(0, 0, KEY_F1), /* Advert */ @@ -121,39 +119,32 @@ static const unsigned int ams_delta_keymap[] = { KEY(7, 3, KEY_LEFTCTRL), /* Vol down */ }; -void ams_delta_latch1_write(u8 mask, u8 value) -{ - ams_delta_latch1_reg &= ~mask; - ams_delta_latch1_reg |= value; - *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg; -} - -void ams_delta_latch2_write(u16 mask, u16 value) -{ - ams_delta_latch2_reg &= ~mask; - ams_delta_latch2_reg |= value; - *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg; -} +#define LATCH1_PHYS 0x01000000 +#define LATCH1_VIRT 0xEA000000 +#define MODEM_PHYS 0x04000000 +#define MODEM_VIRT 0xEB000000 +#define LATCH2_PHYS 0x08000000 +#define LATCH2_VIRT 0xEC000000 static struct map_desc ams_delta_io_desc[] __initdata = { /* AMS_DELTA_LATCH1 */ { - .virtual = AMS_DELTA_LATCH1_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS), + .virtual = LATCH1_VIRT, + .pfn = __phys_to_pfn(LATCH1_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_LATCH2 */ { - .virtual = AMS_DELTA_LATCH2_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS), + .virtual = LATCH2_VIRT, + .pfn = __phys_to_pfn(LATCH2_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_MODEM */ { - .virtual = AMS_DELTA_MODEM_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS), + .virtual = MODEM_VIRT, + .pfn = __phys_to_pfn(MODEM_PHYS), .length = 0x01000000, .type = MT_DEVICE } @@ -173,6 +164,190 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = { { OMAP_TAG_LCD, &ams_delta_lcd_config }, }; +static struct resource latch1_resources[] __initconst = { + [0] = { + .name = "dat", + .start = LATCH1_PHYS, + .end = LATCH1_PHYS + (AMS_DELTA_LATCH1_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, +}; + +static struct bgpio_pdata latch1_pdata __initconst = { + .base = AMS_DELTA_LATCH1_GPIO_BASE, + .ngpio = AMS_DELTA_LATCH1_NGPIO, +}; + +static struct platform_device latch1_gpio_device = { + .name = "basic-mmio-gpio", + .id = 0, + .resource = latch1_resources, + .num_resources = ARRAY_SIZE(latch1_resources), + .dev = { + .platform_data = &latch1_pdata, + }, +}; + +static struct resource latch2_resources[] __initconst = { + [0] = { + .name = "dat", + .start = LATCH2_PHYS, + .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, +}; + +static struct bgpio_pdata latch2_pdata __initconst = { + .base = AMS_DELTA_LATCH2_GPIO_BASE, + .ngpio = AMS_DELTA_LATCH2_NGPIO, +}; + +static struct platform_device latch2_gpio_device = { + .name = "basic-mmio-gpio", + .id = 1, + .resource = latch2_resources, + .num_resources = ARRAY_SIZE(latch2_resources), + .dev = { + .platform_data = &latch2_pdata, + }, +}; + +static struct gpio latch_gpios[] __initconst = { + { + .gpio = AMS_DELTA_GPIO_PIN_LED_CAMERA, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led_camera", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LED_ADVERT, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led_advert", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LED_EMAIL, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led_email", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LED_HANDSFREE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led_handsfree", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LED_VOICEMAIL, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led_voicemail", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LED_VOICE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "led_voice", + }, + { + .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 6, + .flags = GPIOF_OUT_INIT_LOW, + .label = "dockit1", + }, + { + .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 7, + .flags = GPIOF_OUT_INIT_LOW, + .label = "dockit2", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, + .flags = GPIOF_OUT_INIT_LOW, + .label = "lcd_vblen", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP, + .flags = GPIOF_OUT_INIT_LOW, + .label = "lcd_ndisp", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_nce", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_NRE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_nre", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_NWP, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_nwp", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_NWE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_nwe", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_ALE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_ale", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_CLE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_cle", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, + .flags = GPIOF_OUT_INIT_LOW, + .label = "keybrd_pwr", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT, + .flags = GPIOF_OUT_INIT_LOW, + .label = "keybrd_dataout", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN, + .flags = GPIOF_OUT_INIT_LOW, + .label = "scard_rstin", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC, + .flags = GPIOF_OUT_INIT_LOW, + .label = "scard_cmdvcc", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, + .flags = GPIOF_OUT_INIT_LOW, + .label = "modem_nreset", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC, + .flags = GPIOF_OUT_INIT_LOW, + .label = "modem_codec", + }, + { + .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14, + .flags = GPIOF_OUT_INIT_LOW, + .label = "hookflash1", + }, + { + .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15, + .flags = GPIOF_OUT_INIT_LOW, + .label = "hookflash2", + }, +}; + +void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) +{ + int bit = 0; + u16 bitpos = 1 << bit; + + for (; bit < ngpio; bit++, bitpos = bitpos << 1) { + if (!(mask & bitpos)) + continue; + gpio_set_value(base + bit, (value & bitpos) != 0); + } +} +EXPORT_SYMBOL(ams_delta_latch_write); + static struct resource ams_delta_nand_resources[] = { [0] = { .start = OMAP1_MPUIO_BASE, @@ -275,11 +450,13 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { }; static struct platform_device *ams_delta_devices[] __initdata = { + &latch1_gpio_device, + &latch2_gpio_device, &ams_delta_kp_device, &ams_delta_camera_device, }; -static struct platform_device *late_devices[] __initdata = { +static struct platform_device *late_devices[] __initconst = { &ams_delta_nand_device, &ams_delta_lcd_device, &ams_delta_led_device, @@ -325,8 +502,8 @@ static void __init ams_delta_init(void) static struct plat_serial8250_port ams_delta_modem_ports[] = { { - .membase = IOMEM(AMS_DELTA_MODEM_VIRT), - .mapbase = AMS_DELTA_MODEM_PHYS, + .membase = IOMEM(MODEM_VIRT), + .mapbase = MODEM_PHYS, .irq = -EINVAL, /* changed later */ .flags = UPF_BOOT_AUTOCONF, .irqflags = IRQF_TRIGGER_RISING, @@ -352,8 +529,11 @@ static int __init late_init(void) if (!machine_is_ams_delta()) return -ENODEV; - /* Clear latch2 (NAND, LCD, modem enable) */ - ams_delta_latch2_write(~0, 0); + err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios)); + if (err) { + pr_err("Couldn't take over latch1/latch2 GPIO pins\n"); + return err; + } platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); @@ -399,6 +579,3 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .init_machine = ams_delta_init, .timer = &omap1_timer, MACHINE_END - -EXPORT_SYMBOL(ams_delta_latch1_write); -EXPORT_SYMBOL(ams_delta_latch2_write); diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index 51b102dc906b..68ffe328a777 100644 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -28,13 +28,6 @@ #if defined (CONFIG_MACH_AMS_DELTA) -#define AMS_DELTA_LATCH1_PHYS 0x01000000 -#define AMS_DELTA_LATCH1_VIRT 0xEA000000 -#define AMS_DELTA_MODEM_PHYS 0x04000000 -#define AMS_DELTA_MODEM_VIRT 0xEB000000 -#define AMS_DELTA_LATCH2_PHYS 0x08000000 -#define AMS_DELTA_LATCH2_VIRT 0xEC000000 - #define AMS_DELTA_LATCH1_LED_CAMERA 0x01 #define AMS_DELTA_LATCH1_LED_ADVERT 0x02 #define AMS_DELTA_LATCH1_LED_EMAIL 0x04 @@ -66,9 +59,41 @@ #define AMS_DELTA_GPIO_PIN_CONFIG 11 #define AMS_DELTA_GPIO_PIN_NAND_RB 12 +#define AMS_DELTA_GPIO_PIN_LED_CAMERA 232 +#define AMS_DELTA_GPIO_PIN_LED_ADVERT 233 +#define AMS_DELTA_GPIO_PIN_LED_EMAIL 234 +#define AMS_DELTA_GPIO_PIN_LED_HANDSFREE 235 +#define AMS_DELTA_GPIO_PIN_LED_VOICEMAIL 236 +#define AMS_DELTA_GPIO_PIN_LED_VOICE 237 + +#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240 +#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241 +#define AMS_DELTA_GPIO_PIN_NAND_NCE 242 +#define AMS_DELTA_GPIO_PIN_NAND_NRE 243 +#define AMS_DELTA_GPIO_PIN_NAND_NWP 244 +#define AMS_DELTA_GPIO_PIN_NAND_NWE 245 +#define AMS_DELTA_GPIO_PIN_NAND_ALE 246 +#define AMS_DELTA_GPIO_PIN_NAND_CLE 247 +#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248 +#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249 +#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250 +#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251 +#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252 +#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253 + +#define AMS_DELTA_LATCH1_GPIO_BASE AMS_DELTA_GPIO_PIN_LED_CAMERA +#define AMS_DELTA_LATCH1_NGPIO 8 +#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN +#define AMS_DELTA_LATCH2_NGPIO 16 + #ifndef __ASSEMBLY__ -void ams_delta_latch1_write(u8 mask, u8 value); -void ams_delta_latch2_write(u16 mask, u16 value); +void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value); +#define ams_delta_latch1_write(mask, value) \ + ams_delta_latch_write(AMS_DELTA_LATCH1_GPIO_BASE, \ + AMS_DELTA_LATCH1_NGPIO, (mask), (value)) +#define ams_delta_latch2_write(mask, value) \ + ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \ + AMS_DELTA_LATCH2_NGPIO, (mask), (value)) #endif #endif /* CONFIG_MACH_AMS_DELTA */ -- cgit v1.2.3 From 5ca6180fa6d7333fb5fabf30420b0e3cc32dd731 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 20 Dec 2011 00:08:53 +0100 Subject: ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio Now that the Amstrad Delta on-board latches have been converted to GPIO devices, use the generic driver to control on-board LEDs which hang off those latches. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/Kconfig | 1 + arch/arm/mach-omap1/board-ams-delta.c | 87 +++++++++++++---------- arch/arm/plat-omap/include/plat/board-ams-delta.h | 19 ----- 3 files changed, 49 insertions(+), 58 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index e14532f236a0..5b1edbae6893 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -156,6 +156,7 @@ config MACH_AMS_DELTA depends on ARCH_OMAP1 && ARCH_OMAP15XX select FIQ select GPIO_GENERIC_PLATFORM + select LEDS_GPIO_REGISTER help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index cff2711dc259..034d0094e93a 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -164,18 +164,21 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = { { OMAP_TAG_LCD, &ams_delta_lcd_config }, }; +#define LATCH1_GPIO_BASE 232 +#define LATCH1_NGPIO 8 + static struct resource latch1_resources[] __initconst = { [0] = { .name = "dat", .start = LATCH1_PHYS, - .end = LATCH1_PHYS + (AMS_DELTA_LATCH1_NGPIO - 1) / 8, + .end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8, .flags = IORESOURCE_MEM, }, }; static struct bgpio_pdata latch1_pdata __initconst = { - .base = AMS_DELTA_LATCH1_GPIO_BASE, - .ngpio = AMS_DELTA_LATCH1_NGPIO, + .base = LATCH1_GPIO_BASE, + .ngpio = LATCH1_NGPIO, }; static struct platform_device latch1_gpio_device = { @@ -214,42 +217,12 @@ static struct platform_device latch2_gpio_device = { static struct gpio latch_gpios[] __initconst = { { - .gpio = AMS_DELTA_GPIO_PIN_LED_CAMERA, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led_camera", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LED_ADVERT, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led_advert", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LED_EMAIL, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led_email", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LED_HANDSFREE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led_handsfree", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LED_VOICEMAIL, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led_voicemail", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LED_VOICE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "led_voice", - }, - { - .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 6, + .gpio = LATCH1_GPIO_BASE + 6, .flags = GPIOF_OUT_INIT_LOW, .label = "dockit1", }, { - .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 7, + .gpio = LATCH1_GPIO_BASE + 7, .flags = GPIOF_OUT_INIT_LOW, .label = "dockit2", }, @@ -399,9 +372,45 @@ static struct platform_device ams_delta_lcd_device = { .id = -1, }; -static struct platform_device ams_delta_led_device = { - .name = "ams-delta-led", - .id = -1 +static struct gpio_led gpio_leds[] __initconst = { + { + .name = "camera", + .gpio = LATCH1_GPIO_BASE + 0, + .default_state = LEDS_GPIO_DEFSTATE_OFF, +#ifdef CONFIG_LEDS_TRIGGERS + .default_trigger = "ams_delta_camera", +#endif + }, + { + .name = "advert", + .gpio = LATCH1_GPIO_BASE + 1, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "email", + .gpio = LATCH1_GPIO_BASE + 2, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "handsfree", + .gpio = LATCH1_GPIO_BASE + 3, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "voicemail", + .gpio = LATCH1_GPIO_BASE + 4, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "voice", + .gpio = LATCH1_GPIO_BASE + 5, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, +}; + +static struct gpio_led_platform_data leds_pdata __initconst = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), }; static struct i2c_board_info ams_delta_camera_board_info[] = { @@ -459,7 +468,6 @@ static struct platform_device *ams_delta_devices[] __initdata = { static struct platform_device *late_devices[] __initconst = { &ams_delta_nand_device, &ams_delta_lcd_device, - &ams_delta_led_device, }; static void __init ams_delta_init(void) @@ -493,6 +501,7 @@ static void __init ams_delta_init(void) led_trigger_register_simple("ams_delta_camera", &ams_delta_camera_led_trigger); #endif + gpio_led_register_device(-1, &leds_pdata); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); ams_delta_init_fiq(); diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index 68ffe328a777..a0f86ca75ddc 100644 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -28,13 +28,6 @@ #if defined (CONFIG_MACH_AMS_DELTA) -#define AMS_DELTA_LATCH1_LED_CAMERA 0x01 -#define AMS_DELTA_LATCH1_LED_ADVERT 0x02 -#define AMS_DELTA_LATCH1_LED_EMAIL 0x04 -#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08 -#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10 -#define AMS_DELTA_LATCH1_LED_VOICE 0x20 - #define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 #define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 #define AMS_DELTA_LATCH2_NAND_NCE 0x0004 @@ -59,13 +52,6 @@ #define AMS_DELTA_GPIO_PIN_CONFIG 11 #define AMS_DELTA_GPIO_PIN_NAND_RB 12 -#define AMS_DELTA_GPIO_PIN_LED_CAMERA 232 -#define AMS_DELTA_GPIO_PIN_LED_ADVERT 233 -#define AMS_DELTA_GPIO_PIN_LED_EMAIL 234 -#define AMS_DELTA_GPIO_PIN_LED_HANDSFREE 235 -#define AMS_DELTA_GPIO_PIN_LED_VOICEMAIL 236 -#define AMS_DELTA_GPIO_PIN_LED_VOICE 237 - #define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240 #define AMS_DELTA_GPIO_PIN_LCD_NDISP 241 #define AMS_DELTA_GPIO_PIN_NAND_NCE 242 @@ -81,16 +67,11 @@ #define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252 #define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253 -#define AMS_DELTA_LATCH1_GPIO_BASE AMS_DELTA_GPIO_PIN_LED_CAMERA -#define AMS_DELTA_LATCH1_NGPIO 8 #define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN #define AMS_DELTA_LATCH2_NGPIO 16 #ifndef __ASSEMBLY__ void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value); -#define ams_delta_latch1_write(mask, value) \ - ams_delta_latch_write(AMS_DELTA_LATCH1_GPIO_BASE, \ - AMS_DELTA_LATCH1_NGPIO, (mask), (value)) #define ams_delta_latch2_write(mask, value) \ ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \ AMS_DELTA_LATCH2_NGPIO, (mask), (value)) -- cgit v1.2.3 From 68f0676699fb0e0b18feb8459c35ecdfe3127b3d Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 20 Dec 2011 00:08:55 +0100 Subject: MTD: NAND: ams-delta: use GPIO instead of custom I/O Don't use Amstrad Delta custom I/O functions for controlling the device, use GPIO API instead. While being at it, add missing gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB). Signed-off-by: Janusz Krzysztofik Cc: David Woodhouse Reviewed-by: Artem Bityutskiy Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 30 --------- arch/arm/plat-omap/include/plat/board-ams-delta.h | 6 -- drivers/mtd/nand/ams-delta.c | 74 ++++++++++++++++------- 3 files changed, 52 insertions(+), 58 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 034d0094e93a..cc6f96249e77 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -236,36 +236,6 @@ static struct gpio latch_gpios[] __initconst = { .flags = GPIOF_OUT_INIT_LOW, .label = "lcd_ndisp", }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_nce", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_NRE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_nre", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_NWP, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_nwp", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_NWE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_nwe", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_ALE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_ale", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_NAND_CLE, - .flags = GPIOF_OUT_INIT_LOW, - .label = "nand_cle", - }, { .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, .flags = GPIOF_OUT_INIT_LOW, diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index a0f86ca75ddc..3e578339fe8c 100644 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -30,12 +30,6 @@ #define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 #define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 -#define AMS_DELTA_LATCH2_NAND_NCE 0x0004 -#define AMS_DELTA_LATCH2_NAND_NRE 0x0008 -#define AMS_DELTA_LATCH2_NAND_NWP 0x0010 -#define AMS_DELTA_LATCH2_NAND_NWE 0x0020 -#define AMS_DELTA_LATCH2_NAND_ALE 0x0040 -#define AMS_DELTA_LATCH2_NAND_CLE 0x0080 #define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 #define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 #define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 9e6b498c9beb..5769bd234283 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include /* @@ -34,8 +34,6 @@ */ static struct mtd_info *ams_delta_mtd = NULL; -#define NAND_MASK (AMS_DELTA_LATCH2_NAND_NRE | AMS_DELTA_LATCH2_NAND_NWE | AMS_DELTA_LATCH2_NAND_CLE | AMS_DELTA_LATCH2_NAND_ALE | AMS_DELTA_LATCH2_NAND_NCE | AMS_DELTA_LATCH2_NAND_NWP) - /* * Define partitions for flash devices */ @@ -68,10 +66,9 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte) writew(0, io_base + OMAP_MPUIO_IO_CNTL); writew(byte, this->IO_ADDR_W); - ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, 0); + gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 0); ndelay(40); - ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, - AMS_DELTA_LATCH2_NAND_NWE); + gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 1); } static u_char ams_delta_read_byte(struct mtd_info *mtd) @@ -80,12 +77,11 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd) struct nand_chip *this = mtd->priv; void __iomem *io_base = this->priv; - ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, 0); + gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 0); ndelay(40); writew(~0, io_base + OMAP_MPUIO_IO_CNTL); res = readw(this->IO_ADDR_R); - ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, - AMS_DELTA_LATCH2_NAND_NRE); + gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 1); return res; } @@ -132,15 +128,12 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd, { if (ctrl & NAND_CTRL_CHANGE) { - unsigned long bits; - - bits = (~ctrl & NAND_NCE) ? AMS_DELTA_LATCH2_NAND_NCE : 0; - bits |= (ctrl & NAND_CLE) ? AMS_DELTA_LATCH2_NAND_CLE : 0; - bits |= (ctrl & NAND_ALE) ? AMS_DELTA_LATCH2_NAND_ALE : 0; - - ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_CLE | - AMS_DELTA_LATCH2_NAND_ALE | - AMS_DELTA_LATCH2_NAND_NCE, bits); + gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NCE, + (ctrl & NAND_NCE) == 0); + gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_CLE, + (ctrl & NAND_CLE) != 0); + gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_ALE, + (ctrl & NAND_ALE) != 0); } if (cmd != NAND_CMD_NONE) @@ -152,6 +145,39 @@ static int ams_delta_nand_ready(struct mtd_info *mtd) return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB); } +static struct gpio _mandatory_gpio[] __initconst_or_module = { + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "nand_nce", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_NRE, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "nand_nre", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_NWP, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "nand_nwp", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_NWE, + .flags = GPIOF_OUT_INIT_HIGH, + .label = "nand_nwe", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_ALE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_ale", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_NAND_CLE, + .flags = GPIOF_OUT_INIT_LOW, + .label = "nand_cle", + }, +}; + /* * Main initialization routine */ @@ -223,10 +249,9 @@ static int __devinit ams_delta_init(struct platform_device *pdev) platform_set_drvdata(pdev, io_base); /* Set chip enabled, but */ - ams_delta_latch2_write(NAND_MASK, AMS_DELTA_LATCH2_NAND_NRE | - AMS_DELTA_LATCH2_NAND_NWE | - AMS_DELTA_LATCH2_NAND_NCE | - AMS_DELTA_LATCH2_NAND_NWP); + err = gpio_request_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio)); + if (err) + goto out_gpio; /* Scan to find existence of the device */ if (nand_scan(ams_delta_mtd, 1)) { @@ -241,7 +266,10 @@ static int __devinit ams_delta_init(struct platform_device *pdev) goto out; out_mtd: + gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio)); +out_gpio: platform_set_drvdata(pdev, NULL); + gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB); iounmap(io_base); out_release_io: release_mem_region(res->start, resource_size(res)); @@ -262,6 +290,8 @@ static int __devexit ams_delta_cleanup(struct platform_device *pdev) /* Release resources, unregister device */ nand_release(ams_delta_mtd); + gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio)); + gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB); iounmap(io_base); release_mem_region(res->start, resource_size(res)); -- cgit v1.2.3 From a218d19f6a91c076c7ed8a7c0082f777248c5394 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 20 Dec 2011 00:08:56 +0100 Subject: omapfb: lcd_ams_delta: drive control lines over GPIO Don't use Amstrad Delta custom I/O functions any longer, use GPIO API instead. Signed-off-by: Janusz Krzysztofik Acked-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 10 --------- arch/arm/plat-omap/include/plat/board-ams-delta.h | 2 -- drivers/video/omap/lcd_ams_delta.c | 27 +++++++++++++++++------ 3 files changed, 20 insertions(+), 19 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index cc6f96249e77..3aba8f99cc7e 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -226,16 +226,6 @@ static struct gpio latch_gpios[] __initconst = { .flags = GPIOF_OUT_INIT_LOW, .label = "dockit2", }, - { - .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, - .flags = GPIOF_OUT_INIT_LOW, - .label = "lcd_vblen", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP, - .flags = GPIOF_OUT_INIT_LOW, - .label = "lcd_ndisp", - }, { .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, .flags = GPIOF_OUT_INIT_LOW, diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index 3e578339fe8c..e9ad673be32f 100644 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -28,8 +28,6 @@ #if defined (CONFIG_MACH_AMS_DELTA) -#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 -#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 #define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 #define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 #define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c index 6978ae4ef83a..73b211b92a39 100644 --- a/drivers/video/omap/lcd_ams_delta.c +++ b/drivers/video/omap/lcd_ams_delta.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -98,29 +99,41 @@ static struct lcd_ops ams_delta_lcd_ops = { /* omapfb panel section */ +static struct gpio _gpios[] __initconst_or_module = { + { + .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, + .flags = GPIOF_OUT_INIT_LOW, + .label = "lcd_vblen", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP, + .flags = GPIOF_OUT_INIT_LOW, + .label = "lcd_ndisp", + }, +}; + static int ams_delta_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) { - return 0; + return gpio_request_array(_gpios, ARRAY_SIZE(_gpios)); } static void ams_delta_panel_cleanup(struct lcd_panel *panel) { + gpio_free_array(_gpios, ARRAY_SIZE(_gpios)); } static int ams_delta_panel_enable(struct lcd_panel *panel) { - ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_NDISP, - AMS_DELTA_LATCH2_LCD_NDISP); - ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_VBLEN, - AMS_DELTA_LATCH2_LCD_VBLEN); + gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 1); + gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 1); return 0; } static void ams_delta_panel_disable(struct lcd_panel *panel) { - ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_VBLEN, 0); - ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_NDISP, 0); + gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 0); + gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 0); } static unsigned long ams_delta_panel_get_caps(struct lcd_panel *panel) -- cgit v1.2.3 From 8d09a1bb3147ddbcf0a9483021ca699c54c54732 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 20 Dec 2011 23:10:34 +0100 Subject: input: serio: ams-delta: toggle keyboard power over GPIO Don't use Amstrad Delta custom I/O functions once GPIO interface is available for the underlying hardware. While requesting and initializing GPIO pins used, also take care of one extra pin KEYBRD_DATAOUT which, even if not used by the driver, belongs to the device and affects its functioning. Once done, move the driver initialization back to the device_initcall level, reverting the temporary chane introduced with patch 1/7 "ARM: OMAP1: ams-delta: register latch dependent devices later". That change is no longer required once the driver takes care of registering used GPIO pins, and it's better to initialize the device before others using the latch2 based GPIO pins, otherwise a garbage is reported on boot, perhaps due to random data already captured by the FIQ handler while the keyboard related latch bits are written with random values during initialization of those other latch2 dependent devices. Signed-off-by: Janusz Krzysztofik Acked-by: Dmitry Torokhov [tony@atomide.com: renamed _gpios to ams_delta_gpios] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 10 ---- arch/arm/plat-omap/include/plat/board-ams-delta.h | 2 - drivers/input/serio/ams_delta_serio.c | 56 ++++++++++++++--------- 3 files changed, 35 insertions(+), 33 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 3aba8f99cc7e..673cf21a90f8 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -226,16 +226,6 @@ static struct gpio latch_gpios[] __initconst = { .flags = GPIOF_OUT_INIT_LOW, .label = "dockit2", }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, - .flags = GPIOF_OUT_INIT_LOW, - .label = "keybrd_pwr", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT, - .flags = GPIOF_OUT_INIT_LOW, - .label = "keybrd_dataout", - }, { .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN, .flags = GPIOF_OUT_INIT_LOW, diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index e9ad673be32f..027e79eead5e 100644 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -28,8 +28,6 @@ #if defined (CONFIG_MACH_AMS_DELTA) -#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 -#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 #define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 #define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 #define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index 835d37abe62a..0571e2ec358b 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -92,8 +92,7 @@ static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id) static int ams_delta_serio_open(struct serio *serio) { /* enable keyboard */ - ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR, - AMD_DELTA_LATCH2_KEYBRD_PWR); + gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 1); return 0; } @@ -101,9 +100,32 @@ static int ams_delta_serio_open(struct serio *serio) static void ams_delta_serio_close(struct serio *serio) { /* disable keyboard */ - ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR, 0); + gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0); } +static struct gpio ams_delta_gpios[] __initconst_or_module = { + { + .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATA, + .flags = GPIOF_DIR_IN, + .label = "serio-data", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK, + .flags = GPIOF_DIR_IN, + .label = "serio-clock", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, + .flags = GPIOF_OUT_INIT_LOW, + .label = "serio-power", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT, + .flags = GPIOF_OUT_INIT_LOW, + .label = "serio-dataout", + }, +}; + static int __init ams_delta_serio_init(void) { int err; @@ -123,19 +145,12 @@ static int __init ams_delta_serio_init(void) strlcpy(ams_delta_serio->phys, "GPIO/serio0", sizeof(ams_delta_serio->phys)); - err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_DATA, "serio-data"); + err = gpio_request_array(ams_delta_gpios, + ARRAY_SIZE(ams_delta_gpios)); if (err) { - pr_err("ams_delta_serio: Couldn't request gpio pin for data\n"); + pr_err("ams_delta_serio: Couldn't request gpio pins\n"); goto serio; } - gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_DATA); - - err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_CLK, "serio-clock"); - if (err) { - pr_err("ams_delta_serio: couldn't request gpio pin for clock\n"); - goto gpio_data; - } - gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_CLK); err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING, @@ -143,7 +158,7 @@ static int __init ams_delta_serio_init(void) if (err < 0) { pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n", gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); - goto gpio_clk; + goto gpio; } /* * Since GPIO register handling for keyboard clock pin is performed @@ -157,21 +172,20 @@ static int __init ams_delta_serio_init(void) dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name); return 0; -gpio_clk: - gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK); -gpio_data: - gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA); +gpio: + gpio_free_array(ams_delta_gpios, + ARRAY_SIZE(ams_delta_gpios)); serio: kfree(ams_delta_serio); return err; } -late_initcall(ams_delta_serio_init); +module_init(ams_delta_serio_init); static void __exit ams_delta_serio_exit(void) { serio_unregister_port(ams_delta_serio); free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0); - gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK); - gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA); + gpio_free_array(ams_delta_gpios, + ARRAY_SIZE(ams_delta_gpios)); } module_exit(ams_delta_serio_exit); -- cgit v1.2.3 From dc0caefdf48713fce373c8663e5a0d292a424746 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Mar 2012 15:19:15 -0800 Subject: ARM: OMAP1: ams-delta: fix incorrect section tags While resolving section mismatches introduced with recent patches to for-next, a few dangerous, driver bind/unbind unaware section tagging already present in mainline have been identified. Fix them. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 87b13039f936..3c97e6400546 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -154,7 +154,7 @@ static struct omap_lcd_config ams_delta_lcd_config = { .ctrl_name = "internal", }; -static struct omap_usb_config ams_delta_usb_config __initdata = { +static struct omap_usb_config ams_delta_usb_config = { .register_host = 1, .hmc_mode = 16, .pins[0] = 2, @@ -300,7 +300,7 @@ static const struct matrix_keymap_data ams_delta_keymap_data = { .keymap_size = ARRAY_SIZE(ams_delta_keymap), }; -static struct omap_kp_platform_data ams_delta_kp_data __initdata = { +static struct omap_kp_platform_data ams_delta_kp_data = { .rows = 8, .cols = 8, .keymap_data = &ams_delta_keymap_data, -- cgit v1.2.3 From da564a05b3aefe403062411b67d64b7e992718f7 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Fri, 10 Feb 2012 17:48:43 +0100 Subject: ARM: OMAP1: ams-delta: clean up init data section assignments The main purpose of this patch is to fix several section mismatch warnings from the board file and a few board specific drivers, introduced with recent Amstrad Delta patch series, some of them rising up only when building with CONFIG_MODULES not set. While being at it, section tagging of all init data found in the board file have been revised and hopefully corrected and/or optimized. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 18 +++++++++--------- drivers/input/serio/ams_delta_serio.c | 2 +- drivers/mtd/nand/ams-delta.c | 2 +- drivers/video/omap/lcd_ams_delta.c | 2 +- 4 files changed, 12 insertions(+), 12 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 3c97e6400546..ce50fe137269 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -150,7 +150,7 @@ static struct map_desc ams_delta_io_desc[] __initdata = { } }; -static struct omap_lcd_config ams_delta_lcd_config = { +static struct omap_lcd_config ams_delta_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -167,7 +167,7 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = { #define LATCH1_GPIO_BASE 232 #define LATCH1_NGPIO 8 -static struct resource latch1_resources[] __initconst = { +static struct resource latch1_resources[] = { [0] = { .name = "dat", .start = LATCH1_PHYS, @@ -176,7 +176,7 @@ static struct resource latch1_resources[] __initconst = { }, }; -static struct bgpio_pdata latch1_pdata __initconst = { +static struct bgpio_pdata latch1_pdata = { .base = LATCH1_GPIO_BASE, .ngpio = LATCH1_NGPIO, }; @@ -191,7 +191,7 @@ static struct platform_device latch1_gpio_device = { }, }; -static struct resource latch2_resources[] __initconst = { +static struct resource latch2_resources[] = { [0] = { .name = "dat", .start = LATCH2_PHYS, @@ -200,7 +200,7 @@ static struct resource latch2_resources[] __initconst = { }, }; -static struct bgpio_pdata latch2_pdata __initconst = { +static struct bgpio_pdata latch2_pdata = { .base = AMS_DELTA_LATCH2_GPIO_BASE, .ngpio = AMS_DELTA_LATCH2_NGPIO, }; @@ -215,7 +215,7 @@ static struct platform_device latch2_gpio_device = { }, }; -static struct gpio latch_gpios[] __initconst = { +static const struct gpio latch_gpios[] __initconst = { { .gpio = LATCH1_GPIO_BASE + 6, .flags = GPIOF_OUT_INIT_LOW, @@ -322,7 +322,7 @@ static struct platform_device ams_delta_lcd_device = { .id = -1, }; -static struct gpio_led gpio_leds[] __initconst = { +static const struct gpio_led gpio_leds[] __initconst = { { .name = "camera", .gpio = LATCH1_GPIO_BASE + 0, @@ -358,7 +358,7 @@ static struct gpio_led gpio_leds[] __initconst = { }, }; -static struct gpio_led_platform_data leds_pdata __initconst = { +static const struct gpio_led_platform_data leds_pdata __initconst = { .leds = gpio_leds, .num_leds = ARRAY_SIZE(gpio_leds), }; @@ -415,7 +415,7 @@ static struct platform_device *ams_delta_devices[] __initdata = { &ams_delta_camera_device, }; -static struct platform_device *late_devices[] __initconst = { +static struct platform_device *late_devices[] __initdata = { &ams_delta_nand_device, &ams_delta_lcd_device, }; diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index 0571e2ec358b..bd5b10eeeb40 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -103,7 +103,7 @@ static void ams_delta_serio_close(struct serio *serio) gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0); } -static struct gpio ams_delta_gpios[] __initconst_or_module = { +static const struct gpio ams_delta_gpios[] __initconst_or_module = { { .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATA, .flags = GPIOF_DIR_IN, diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 85934dc8546f..73416951f4c1 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -145,7 +145,7 @@ static int ams_delta_nand_ready(struct mtd_info *mtd) return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB); } -static struct gpio _mandatory_gpio[] __initconst_or_module = { +static const struct gpio _mandatory_gpio[] = { { .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE, .flags = GPIOF_OUT_INIT_HIGH, diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c index 0e71e2898b18..d3a311327227 100644 --- a/drivers/video/omap/lcd_ams_delta.c +++ b/drivers/video/omap/lcd_ams_delta.c @@ -99,7 +99,7 @@ static struct lcd_ops ams_delta_lcd_ops = { /* omapfb panel section */ -static struct gpio _gpios[] __initconst_or_module = { +static const struct gpio _gpios[] = { { .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, .flags = GPIOF_OUT_INIT_LOW, -- cgit v1.2.3 From ac2885df30e2597d627ad619c01b6fc55ac540a7 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Mon, 5 Mar 2012 17:05:10 +0100 Subject: ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin The Amstrad Delta on-board latch2 bit named MODEM_NRESET, now available as a GPIO pin AMS_DELTA_GPIO_PIN_NMODEM_RESET, is used to power up/down (bring into/out of a reset state) two distinct on-board devices simultaneously: the modem, and the voice codec. As a consequence, that bit is, or can be, manipulated concurrently by two drivers, or their platform provided hooks. Instead of updating those drivers to use the gpiolib API as a new method of controlling the MODEM_NRESET pin state, like it was done to other drivers accessing latch2 pins, and still being vulnerable to potential concurrency conflicts, or trying to solve that sharing issue with a custom piece of code, set up a fixed regulator device on top of that GPIO pin, with the intention of updating both drivers to manipulate that regulator, not the GPIO pin directly. Before the ASoC driver is updated and the modem platform data expanded with a power management callback for switching its power, the ams_delta_latch_write() function, which still provides the old API for accessing latch2 functionality from not updated drivers, is modified to toggle the regulator instead of the MODEM_NRESET GPIO pin. A helper function provided for balancing the regulator enable/disable operations, together with the consumer data needed for tracking the regulator state, will be removed once the drivers are updated. Depends on patch series "ARM: OMAP1: ams-delta: replace custom I/O with GPIO". Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/Kconfig | 2 + arch/arm/mach-omap1/board-ams-delta.c | 104 ++++++++++++++++++++++++++++++++-- 2 files changed, 100 insertions(+), 6 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 5b1edbae6893..4b6a774606cb 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -157,6 +157,8 @@ config MACH_AMS_DELTA select FIQ select GPIO_GENERIC_PLATFORM select LEDS_GPIO_REGISTER + select REGULATOR + select REGULATOR_FIXED_VOLTAGE help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index ce50fe137269..949997c35707 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -18,7 +18,11 @@ #include #include #include +#include #include +#include +#include +#include #include #include @@ -236,11 +240,6 @@ static const struct gpio latch_gpios[] __initconst = { .flags = GPIOF_OUT_INIT_LOW, .label = "scard_cmdvcc", }, - { - .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, - .flags = GPIOF_OUT_INIT_LOW, - .label = "modem_nreset", - }, { .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC, .flags = GPIOF_OUT_INIT_LOW, @@ -258,6 +257,71 @@ static const struct gpio latch_gpios[] __initconst = { }, }; +static struct regulator_consumer_supply modem_nreset_consumers[] = { + REGULATOR_SUPPLY("RESET#", "serial8250.1"), + REGULATOR_SUPPLY("POR", "cx20442-codec"), +}; + +static struct regulator_init_data modem_nreset_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers), + .consumer_supplies = modem_nreset_consumers, +}; + +static struct fixed_voltage_config modem_nreset_config = { + .supply_name = "modem_nreset", + .microvolts = 3300000, + .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, + .startup_delay = 25000, + .enable_high = 1, + .enabled_at_boot = 1, + .init_data = &modem_nreset_data, +}; + +static struct platform_device modem_nreset_device = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &modem_nreset_config, + }, +}; + +struct modem_private_data { + struct regulator *regulator; + struct { + struct mutex lock; + bool enabled; + } consumer; +}; + +static int regulator_toggle(struct modem_private_data *priv, bool enable) +{ + int err = 0; + + mutex_lock(&priv->consumer.lock); + if (IS_ERR(priv->regulator)) { + err = PTR_ERR(priv->regulator); + } else if (enable) { + if (!priv->consumer.enabled) { + err = regulator_enable(priv->regulator); + priv->consumer.enabled = true; + } + } else { + if (priv->consumer.enabled) { + err = regulator_disable(priv->regulator); + priv->consumer.enabled = false; + } + } + mutex_unlock(&priv->consumer.lock); + + return err; +} + +static struct modem_private_data modem_priv; + void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) { int bit = 0; @@ -266,7 +330,10 @@ void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) for (; bit < ngpio; bit++, bitpos = bitpos << 1) { if (!(mask & bitpos)) continue; - gpio_set_value(base + bit, (value & bitpos) != 0); + else if (base + bit == AMS_DELTA_GPIO_PIN_MODEM_NRESET) + regulator_toggle(&modem_priv, (value & bitpos) != 0); + else + gpio_set_value(base + bit, (value & bitpos) != 0); } } EXPORT_SYMBOL(ams_delta_latch_write); @@ -496,6 +563,12 @@ static int __init late_init(void) platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); + err = platform_device_register(&modem_nreset_device); + if (err) { + pr_err("Couldn't register the modem regulator device\n"); + return err; + } + omap_cfg_reg(M14_1510_GPIO2); ams_delta_modem_ports[0].irq = gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); @@ -507,6 +580,10 @@ static int __init late_init(void) } gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + /* Initialize the modem_nreset regulator consumer before use */ + mutex_init(&modem_priv.consumer.lock); + modem_priv.regulator = ERR_PTR(-ENODEV); + ams_delta_latch2_write( AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC); @@ -514,8 +591,23 @@ static int __init late_init(void) err = platform_device_register(&ams_delta_modem_device); if (err) goto gpio_free; + + /* + * Once the modem device is registered, the modem_nreset + * regulator can be requested on behalf of that device. + * The regulator is used via ams_delta_latch_write() + * by the modem and ASoC drivers until updated. + */ + modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev, + "RESET#"); + if (IS_ERR(modem_priv.regulator)) { + err = PTR_ERR(modem_priv.regulator); + goto unregister; + } return 0; +unregister: + platform_device_unregister(&ams_delta_modem_device); gpio_free: gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); return err; -- cgit v1.2.3 From aabf31737a6a5eb0c4d73857409cd5bcc914d5f5 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Mon, 5 Mar 2012 17:05:11 +0100 Subject: ARM: OMAP1: ams-delta: update the modem to use regulator API After the CX20442 codec driver already takes care of enabling the codec power for itself (commit f75a8ff67d161b5166a2c2360bb2ffaefd5eb853, "ASoC: cx20442: add bias control over a platform provided regulator"), but before dropping the old bias control method from the Amstrad Delta ASoC sound card file, which in fact keeps the modem power always on, even on the ASoC device close for now, extend the modem setup with a power management callback which toggles the regulator up to the modem's needs, reusing the previously set up regulator consumer for this. Also, drop the MODEM_NRESET pin setup from the modem initialization procedure, as this operation was already ineffective since patch 1/3, and not needed because the regulator is set up as initially enabled. Depends on patch 1/3 "ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin" to apply cleanly. Signed-off-by: Janusz Krzysztofik Cc: Tony Lindgren Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 949997c35707..2fb2cbb1e105 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -526,6 +526,16 @@ static void __init ams_delta_init(void) omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); } +static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) +{ + struct modem_private_data *priv = port->private_data; + + if (state == old) + return; + + regulator_toggle(priv, state == 0); +} + static struct plat_serial8250_port ams_delta_modem_ports[] = { { .membase = IOMEM(MODEM_VIRT), @@ -536,6 +546,8 @@ static struct plat_serial8250_port ams_delta_modem_ports[] = { .iotype = UPIO_MEM, .regshift = 1, .uartclk = BASE_BAUD * 16, + .pm = modem_pm, + .private_data = &modem_priv, }, { }, }; @@ -584,9 +596,8 @@ static int __init late_init(void) mutex_init(&modem_priv.consumer.lock); modem_priv.regulator = ERR_PTR(-ENODEV); - ams_delta_latch2_write( - AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, - AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC); + ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, + AMS_DELTA_LATCH2_MODEM_CODEC); err = platform_device_register(&ams_delta_modem_device); if (err) @@ -595,8 +606,9 @@ static int __init late_init(void) /* * Once the modem device is registered, the modem_nreset * regulator can be requested on behalf of that device. - * The regulator is used via ams_delta_latch_write() - * by the modem and ASoC drivers until updated. + * In addition to the modem .pm callback, that regulator + * is still used via the ams_delta_latch_write() wrapper + * by the ASoC driver until updated. */ modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev, "RESET#"); -- cgit v1.2.3 From 0379c1f55b734d9d112f535e12f4508b90a1bab1 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Mon, 5 Mar 2012 17:05:12 +0100 Subject: ASoC: OMAP: ams-delta: drop .set_bias_level callback This functionality has already been implemented in the cx20442 codec driver (commit f75a8ff67d161b5166a2c2360bb2ffaefd5eb853, "ASoC: cx20442: add bias control over a platform provided regulator"), no need to keep it here duplicated. Once done, remove the no longer used AMS_DELTA_LATCH2_MODEM_NRESET symbol from the board header file and a call to the regulator_toggle() helper function from the old API wrapper found in the board file. While being at it, simplify the way the modem .pm callback handles the regulator and drop that helper function and its related consumer setup completely. Depends on patches 1/3 and 2/3 for clean apply and keep things working. Signed-off-by: Janusz Krzysztofik Acked-by: Mark Brown Cc: Tony Lindgren Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 42 ++++------------------- arch/arm/plat-omap/include/plat/board-ams-delta.h | 1 - sound/soc/omap/ams-delta.c | 32 ----------------- 3 files changed, 7 insertions(+), 68 deletions(-) (limited to 'arch/arm/mach-omap1') diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 2fb2cbb1e105..cb6afe670468 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include @@ -291,35 +290,8 @@ static struct platform_device modem_nreset_device = { struct modem_private_data { struct regulator *regulator; - struct { - struct mutex lock; - bool enabled; - } consumer; }; -static int regulator_toggle(struct modem_private_data *priv, bool enable) -{ - int err = 0; - - mutex_lock(&priv->consumer.lock); - if (IS_ERR(priv->regulator)) { - err = PTR_ERR(priv->regulator); - } else if (enable) { - if (!priv->consumer.enabled) { - err = regulator_enable(priv->regulator); - priv->consumer.enabled = true; - } - } else { - if (priv->consumer.enabled) { - err = regulator_disable(priv->regulator); - priv->consumer.enabled = false; - } - } - mutex_unlock(&priv->consumer.lock); - - return err; -} - static struct modem_private_data modem_priv; void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) @@ -330,8 +302,6 @@ void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) for (; bit < ngpio; bit++, bitpos = bitpos << 1) { if (!(mask & bitpos)) continue; - else if (base + bit == AMS_DELTA_GPIO_PIN_MODEM_NRESET) - regulator_toggle(&modem_priv, (value & bitpos) != 0); else gpio_set_value(base + bit, (value & bitpos) != 0); } @@ -530,10 +500,16 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) { struct modem_private_data *priv = port->private_data; + if (IS_ERR(priv->regulator)) + return; + if (state == old) return; - regulator_toggle(priv, state == 0); + if (state == 0) + regulator_enable(priv->regulator); + else if (old == 0) + regulator_disable(priv->regulator); } static struct plat_serial8250_port ams_delta_modem_ports[] = { @@ -593,7 +569,6 @@ static int __init late_init(void) gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ); /* Initialize the modem_nreset regulator consumer before use */ - mutex_init(&modem_priv.consumer.lock); modem_priv.regulator = ERR_PTR(-ENODEV); ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, @@ -606,9 +581,6 @@ static int __init late_init(void) /* * Once the modem device is registered, the modem_nreset * regulator can be requested on behalf of that device. - * In addition to the modem .pm callback, that regulator - * is still used via the ams_delta_latch_write() wrapper - * by the ASoC driver until updated. */ modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev, "RESET#"); diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index 027e79eead5e..ad6f865d1f16 100644 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -30,7 +30,6 @@ #define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 #define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 -#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 #define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 #define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c index da6e005c1c41..f610260065ba 100644 --- a/sound/soc/omap/ams-delta.c +++ b/sound/soc/omap/ams-delta.c @@ -426,29 +426,6 @@ static struct snd_soc_ops ams_delta_ops = { }; -/* Board specific codec bias level control */ -static int ams_delta_set_bias_level(struct snd_soc_card *card, - struct snd_soc_dapm_context *dapm, - enum snd_soc_bias_level level) -{ - switch (level) { - case SND_SOC_BIAS_ON: - case SND_SOC_BIAS_PREPARE: - case SND_SOC_BIAS_STANDBY: - if (card->dapm.bias_level == SND_SOC_BIAS_OFF) - ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_NRESET, - AMS_DELTA_LATCH2_MODEM_NRESET); - break; - case SND_SOC_BIAS_OFF: - if (card->dapm.bias_level != SND_SOC_BIAS_OFF) - ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_NRESET, - 0); - } - card->dapm.bias_level = level; - - return 0; -} - /* Digital mute implemented using modem/CPU multiplexer. * Shares hardware with codec config pulse generation */ static bool ams_delta_muted = 1; @@ -512,9 +489,6 @@ static int ams_delta_cx20442_init(struct snd_soc_pcm_runtime *rtd) ams_delta_ops.shutdown = ams_delta_shutdown; } - /* Set codec bias level */ - ams_delta_set_bias_level(card, dapm, SND_SOC_BIAS_STANDBY); - /* Add hook switch - can be used to control the codec from userspace * even if line discipline fails */ ret = snd_soc_jack_new(rtd->codec, "hook_switch", @@ -598,7 +572,6 @@ static struct snd_soc_card ams_delta_audio_card = { .owner = THIS_MODULE, .dai_link = &ams_delta_dai_link, .num_links = 1, - .set_bias_level = ams_delta_set_bias_level, }; /* Module init/exit */ @@ -647,11 +620,6 @@ static void __exit ams_delta_module_exit(void) ARRAY_SIZE(ams_delta_hook_switch_gpios), ams_delta_hook_switch_gpios); - /* Keep modem power on */ - ams_delta_set_bias_level(&ams_delta_audio_card, - &ams_delta_audio_card.rtd[0].codec->dapm, - SND_SOC_BIAS_STANDBY); - platform_device_unregister(cx20442_platform_device); platform_device_unregister(ams_delta_audio_platform_device); } -- cgit v1.2.3