From 98618cfe22a5dbb87c0deb341734436aeecd51bf Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 22 Jun 2011 09:25:23 -0300 Subject: ARM: mach-imx/mx27_3ds: Use the standard i.MX macro for GPIO numbering Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-mx27_3ds.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-imx') diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 6e1accf93f81..c60cd3332e81 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -42,10 +42,10 @@ #include "devices-imx27.h" -#define SD1_EN_GPIO (GPIO_PORTB + 25) -#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23) -#define SPI2_SS0 (GPIO_PORTD + 21) -#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTC + 28) +#define SD1_EN_GPIO IMX_GPIO_NR(2, 25) +#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) +#define SPI2_SS0 IMX_GPIO_NR(4, 21) +#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28)) static const int mx27pdk_pins[] __initconst = { /* UART1 */ -- cgit v1.2.3 From b2a08e3e46f594ad605c9b5f5fce6b9f36a9a3eb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 20 Jun 2011 10:37:13 -0300 Subject: ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signals Original code was assuming that the CSPI1 pins on the MX31PDK were the primary pin function, which is incorrect. On MX31PDK board these are the pins that provide CSPI1 functionality: DSR_DCE1 (ALT mode 1) --> CSPI1_CLK RI_DCE1 (ALT mode 1) --> CSPI1_RDY DTR_DTE1 -->CSI1_MOSI DSR_DTE1 --> CSPI1_MISO DTR_DCE2 ---> CSPI1_SS2 The 3 IOMUX settings above are done via GPR as per Table A-1 of the MX31RM. This patch fixes the CSPI1 IOMUX and makes the LCD to be functional. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-mx31_3ds.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm/mach-imx') diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 9b982449cb52..62983bd07d6a 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -53,11 +53,8 @@ static int mx31_3ds_pins[] = { MX31_PIN_RXD1__RXD1, IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /*SPI0*/ - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */ + IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1), /* SPI 1 */ MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_MOSI__MOSI, @@ -689,6 +686,9 @@ static void __init mx31_3ds_init(void) { int ret; + /* Configure SPI1 IOMUX */ + mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true); + mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds"); -- cgit v1.2.3 From aec250dc123be14805d51d29d19bf9c3abf733fa Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 22 Jun 2011 09:25:24 -0300 Subject: ARM: mach-imx/mx27_3ds: Fix regulator support Fix the 2.8V (VMMC1) and 1.8V (VGEN) voltage generation on mx27_3ds. Also configure the IOMUX for the PMIC interrupt pin and for the CSPI chip select that is connected to the MC13783 PMIC. In order to get the voltage for the LCD (2.8V and 1.8V) it is also necessary to turn on GPO1 and GPO3 supplies because they are connected to switches that enable these two voltages. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-mx27_3ds.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-imx') diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index c60cd3332e81..e7965ec176fc 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -46,6 +46,7 @@ #define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) #define SPI2_SS0 IMX_GPIO_NR(4, 21) #define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28)) +#define PMIC_INT IMX_GPIO_NR(3, 14) static const int mx27pdk_pins[] __initconst = { /* UART1 */ @@ -98,9 +99,12 @@ static const int mx27pdk_pins[] __initconst = { PD22_PF_CSPI2_SCLK, PD23_PF_CSPI2_MISO, PD24_PF_CSPI2_MOSI, + SPI2_SS0 | GPIO_GPIO | GPIO_OUT, /* I2C1 */ PD17_PF_I2C_DATA, PD18_PF_I2C_CLK, + /* PMIC INT */ + PMIC_INT | GPIO_GPIO | GPIO_IN, }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -193,6 +197,13 @@ static int __init mx27_3ds_otg_mode(char *options) __setup("otg_mode=", mx27_3ds_otg_mode); /* Regulators */ +static struct regulator_init_data gpo_init = { + .constraints = { + .boot_on = 1, + .always_on = 1, + } +}; + static struct regulator_consumer_supply vmmc1_consumers[] = { REGULATOR_SUPPLY("lcd_2v8", NULL), }; @@ -201,7 +212,9 @@ static struct regulator_init_data vmmc1_init = { .constraints = { .min_uV = 2800000, .max_uV = 2800000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers), .consumer_supplies = vmmc1_consumers, @@ -228,6 +241,12 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { }, { .id = MC13783_REG_VGEN, .init_data = &vgen_init, + }, { + .id = MC13783_REG_GPO1, /* Turn on 1.8V */ + .init_data = &gpo_init, + }, { + .id = MC13783_REG_GPO3, /* Turn on 3.3V */ + .init_data = &gpo_init, }, }; -- cgit v1.2.3