From 495bccf3917b04c6727d720b56620e265c693ace Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 21 Jul 2014 22:54:27 +0800 Subject: ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes dtc was giving warnings for missing #address-cells and #size-cells for the new sun6i-a31-hummingbird.dts, which has a i2c-based rtc device. This patch adds the properties for all i2c controller nodes for sun6i. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 44b07e512c24..e06fbfc55bb7 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -660,6 +660,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 0>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -670,6 +672,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -680,6 +684,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 2>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c3: i2c@01c2b800 { @@ -690,6 +696,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 3>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gmac: ethernet@01c30000 { -- cgit v1.2.3 From 0aa4dcb5b730f5da2540926b94d98636fe7d1cbc Mon Sep 17 00:00:00 2001 From: Bill Pringlemeir Date: Tue, 5 Aug 2014 13:34:00 -0400 Subject: ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions. Previous version had an extra 'fsl' which made the pins not match any entry. The console message, vf610-pinctrl 40048000.iomuxc: no fsl,pins property in node \ /soc/aips-bus@40000000/iomuxc@40048000/vf610-twr/esdhc1grp is displayed without the fix. The prior version would generally work as u-boot sets the pins properly for sdhc. This change allows Linux sdhc use even if u-boot is built without sdhc support. Signed-off-by: Bill Pringlemeir Acked-by: Stefan Agner Fixes: 0517fe6aa880 ("ARM: dts: vf610-twr: Add support for sdhc1") Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-twr.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 11d733406c7e..b8a5e8c68f06 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -168,7 +168,7 @@ }; pinctrl_esdhc1: esdhc1grp { - fsl,fsl,pins = < + fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef VF610_PAD_PTA25__ESDHC1_CMD 0x31ef VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef -- cgit v1.2.3 From 2f643105e53256058d53bc26867c441fe70f21fc Mon Sep 17 00:00:00 2001 From: Silvio Fricke Date: Mon, 11 Aug 2014 15:53:11 +0200 Subject: ARM: dts: imx6: edmqmx6: change enet reset pin Signed-off-by: Silvio Fricke Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 8c1cb53464a0..4fa254347798 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; + phy-reset-gpios = <&gpio1 25 0>; phy-supply = <&vgen2_1v2_eth>; status = "okay"; }; @@ -339,6 +339,7 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; -- cgit v1.2.3 From fa97d2f7448a2f998bca0f4d4e40d6ad49026554 Mon Sep 17 00:00:00 2001 From: Lothar Waßmann Date: Wed, 13 Aug 2014 15:47:47 +0200 Subject: ARM: dts: i.MX53: fix apparent bug in VPU clks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VPU on i.MX53 has two distinct clocks for register access and internal function. Signed-off-by: Lothar Waßmann Fixes: fbf970f61eb9 ("ARM: dts: mx53qsb: Enable VPU support") Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 64fa27b36be0..c6c58c1c00e3 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -731,7 +731,7 @@ compatible = "fsl,imx53-vpu"; reg = <0x63ff4000 0x1000>; interrupts = <9>; - clocks = <&clks IMX5_CLK_VPU_GATE>, + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; resets = <&src 1>; -- cgit v1.2.3 From 3bc4d037c6791c5089a04845995410aac4fdb514 Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Mon, 18 Aug 2014 16:11:24 +0800 Subject: ARM: dts: imx6sx: fix the pad setting for uart CTS_B The current pinfunc define all uart CTS_B IO port for DCE uart 'CTS_B' IP port. Since uart IP port 'CTS_B' is output, and it don't need to set 'SELECT_INPUT' bit. Signed-off-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-pinfunc.h | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h index 3e0b816dac08..bb9c6b78cb97 100644 --- a/arch/arm/boot/dts/imx6sx-pinfunc.h +++ b/arch/arm/boot/dts/imx6sx-pinfunc.h @@ -78,7 +78,7 @@ #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x082C 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0 @@ -96,7 +96,7 @@ #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0834 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0 @@ -213,7 +213,7 @@ #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0854 0x4 0x1 +#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0 @@ -254,7 +254,7 @@ #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1 -#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0844 0x3 0x3 +#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0 @@ -352,7 +352,7 @@ #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1 -#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x082C 0x3 0x3 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0 @@ -404,7 +404,7 @@ #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0854 0x2 0x3 +#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0 @@ -423,7 +423,7 @@ #define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1 -#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x084C 0x2 0x3 +#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0 @@ -815,7 +815,7 @@ #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x083C 0x3 0x1 +#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0 @@ -957,7 +957,7 @@ #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x083C 0x1 0x4 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x0000 0x1 0x0 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1 @@ -1236,7 +1236,7 @@ #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0834 0x4 0x2 +#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0 @@ -1315,7 +1315,7 @@ #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0844 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0 @@ -1409,7 +1409,7 @@ #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0 -#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x083C 0x3 0x3 +#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0 @@ -1510,7 +1510,7 @@ #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x084C 0x2 0x1 +#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0 -- cgit v1.2.3 From 090727b880ff3c56e333f267cc24ab076f3bc096 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 7 Aug 2014 15:01:33 -0300 Subject: ARM: dts: imx53-qsrb: Fix suspend/resume The following error is seen after a suspend/resume cycle on a mx53qsb with a MC34708 PMIC: root@freescale /$ echo mem > /sys/power/state [ 32.630592] PM: Syncing filesystems ... done. [ 32.643924] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 32.652384] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 32.679156] PM: suspend of devices complete after 13.113 msecs [ 32.685128] PM: suspend devices took 0.030 seconds [ 32.696109] PM: late suspend of devices complete after 6.133 msecs [ 33.313032] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 33.322009] PM: noirq suspend of devices complete after 619.667 msecs [ 33.328544] Disabling non-boot CPUs ... [ 33.335031] PM: noirq resume of devices complete after 2.352 msecs [ 33.842940] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 33.976095] [sched_delayed] sched: RT throttling activated [ 33.984804] PM: early resume of devices complete after 642.642 msecs [ 34.352954] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 34.862910] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 34.996595] PM: resume of devices complete after 1005.367 msecs [ 35.372925] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 35.882911] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 35.955707] PM: resume devices took 1.970 seconds [ 35.960445] Restarting tasks ... done. [ 35.993386] fec 63fec000.ethernet eth0: Link is Down [ 36.392980] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 36.902908] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 36.953036] ata1: SATA link down (SStatus 0 SControl 300) [ 37.412922] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 37.922906] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 37.993379] fec 63fec000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 38.432938] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 38.942920] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 39.452933] mc13xxx 0-0008: Failed to read IRQ status: -110 (flood of this error message continues forever) Commit 5169df8be0a432ee ("ARM: dts: i.MX53: add support for MCIMX53-START-R") missed to configure the IOMUX for the PMIC IRQ pin. Configure the PMIC IRQ pin so that the suspend/resume sequence behaves cleanly as expected. Cc: # 3.16 Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-qsrb.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index f1bbf9a32991..82d623d05915 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -28,6 +28,12 @@ MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec >; }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */ + >; + }; }; }; @@ -38,6 +44,8 @@ pmic: mc34708@8 { compatible = "fsl,mc34708"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <23 0x8>; -- cgit v1.2.3 From 4cde3733daa044961cdd3b9be63eee73c8b34589 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 16 Jul 2014 09:50:05 +0100 Subject: ARM: dts: Enable PMIC interrupts on ODROID The ODROID kernel shows that the PMIC interrupt line is hooked up to pin GPX3-2. This is needed for the max77686-irq driver to create the PMIC IRQ domain, which is needed by max77686-rtc. Signed-off-by: Daniel Drake Tested-by: Tomeu Vizoso Signed-off-by: Olof Johansson --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 6d6d23c83d30..cb6f55f24ccf 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -148,6 +148,10 @@ max77686: pmic@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; reg = <0x09>; #clock-cells = <1>; @@ -368,4 +372,11 @@ samsung,pins = "gpx1-3"; samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; -- cgit v1.2.3 From 95d516b9fca8ce77d6babd0c35513e7354441e7d Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 16 Jul 2014 09:50:06 +0100 Subject: ARM: dts: ODROID i2c improvements Increase max i2c bus frequency beyond the default for faster data transfers. According to the manual, these faster speeds are only available when the board is wired up the right way. In this case, the vendor kernel has run at this speed for a long time. sda-delay is needed for talking to RTC on PMIC, otherwise the i2c controller never sees an ACK. Strangely the other PMIC i2c slave (the main one) works fine even without this delay. I Chose value 100 to match the vendor kernel. Signed-off-by: Daniel Drake Reviewed-by: Tomasz Figa Tested-by: Tomeu Vizoso Signed-off-by: Olof Johansson --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index cb6f55f24ccf..adadaf97ac01 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -134,6 +134,8 @@ i2c@13860000 { pinctrl-0 = <&i2c0_bus>; pinctrl-names = "default"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; status = "okay"; usb3503: usb3503@08 { -- cgit v1.2.3 From 1302d32c8411f8cff75ce722451767c3aa5e9fda Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 11 Aug 2014 19:51:44 +0200 Subject: ARM: dts: rockchip: readd missing mmc0 pinctrl settings During the restructuring of the Rockchip Cortex-A9 dtsi files it seems like the pinctrl settings vanished at some point from the mmc0 support. This of course renders them unusable, so readd the necessary pinctrl properties. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3066a-bqcurie2.dts | 2 ++ arch/arm/boot/dts/rk3188-radxarock.dts | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 042f821d9e4d..c9d912da6141 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -149,6 +149,8 @@ &mmc0 { /* sdmmc */ num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; slot@0 { diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 171b610db709..5e4e3c238b2d 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -179,6 +179,8 @@ &mmc0 { num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; slot@0 { -- cgit v1.2.3 From caa9eac5bcc835cfd98085fcd3944f44890d8a8f Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 22 Aug 2014 13:25:10 -0600 Subject: ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised that the current device tree source includes for our modules only happen to work due to referencing the on-carrier 5v0 supply from USB which is not at all available on-module. The modules actually contain TPS60150 charge pumps to generate the PMIC required 5 volts from the one and only 3.3 volt module supply. This patch fixes this. (Note: When back-porting this to v3.16 stable releases, simply drop the change to tegra30-apalis.dtsi; that file was added in v3.17) Cc: #v3.16+ Signed-off-by: Marcel Ziswiler Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- arch/arm/boot/dts/tegra30-apalis.dtsi | 11 ++++++++++- arch/arm/boot/dts/tegra30-colibri.dtsi | 11 ++++++++++- 2 files changed, 20 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 8adaa7871dd3..a5446cba9804 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -423,7 +423,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -674,5 +674,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index bf16f8e65627..c4ed1bec4d92 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -201,7 +201,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -373,5 +373,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; -- cgit v1.2.3 From 12266db732ff3845eaa9ba9354c4938249787aaf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 15 Aug 2014 07:19:10 +0900 Subject: ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux On r8a7791, i2c6 (aka iic3) doesn't need pinmux, but the koelsch dts refers to non-existent pinmux configuration data: pinmux core: sh-pfc does not support function i2c6 sh-pfc e6060000.pfc: invalid function i2c6 in map table Remove it to fix this. Fixes: commit 1d41f36a68c0f4e9b01d563ce33bab5201858b54 ("ARM: shmobile: koelsch dts: Add VDD MPU regulator for DVFS") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman Signed-off-by: Olof Johansson --- arch/arm/boot/dts/r8a7791-koelsch.dts | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 23486c081a69..be59014474b2 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -275,11 +275,6 @@ renesas,function = "msiof0"; }; - i2c6_pins: i2c6 { - renesas,groups = "i2c6"; - renesas,function = "i2c6"; - }; - usb0_pins: usb0 { renesas,groups = "usb0"; renesas,function = "usb0"; @@ -420,8 +415,6 @@ }; &i2c6 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; status = "okay"; clock-frequency = <100000>; -- cgit v1.2.3 From f9908c178c273728166ccc21544821a42015f81d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 23 Aug 2014 10:11:26 +0100 Subject: ARM: dts: hummingboard/cubox-i: add USB OC pinctrl configuration Hummingboard has no over current hardware, so disable the over current detection for both ports. Cubox-i has over current hardware, so appropriately configure this. Signed-off-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-hummingboard.dts | 2 ++ arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 17 +++++++++++++---- 2 files changed, 15 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index c8e51dd41b8f..d1c892e28296 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -181,11 +181,13 @@ }; &usbh1 { + disable-over-current; vbus-supply = <®_usbh1_vbus>; status = "okay"; }; &usbotg { + disable-over-current; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; vbus-supply = <®_usbotg_vbus>; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index e8e781656b3f..298d0fdf8ebe 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -130,16 +130,23 @@ fsl,pins = ; }; + pinctrl_cubox_i_usbh1: cubox-i-usbh1 { + fsl,pins = ; + }; + pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { fsl,pins = ; }; - pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { + pinctrl_cubox_i_usbotg: cubox-i-usbotg { /* - * The Cubox-i pulls this low, but as it's pointless + * The Cubox-i pulls ID low, but as it's pointless * leaving it as a pull-up, even if it is just 10uA. */ - fsl,pins = ; + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + >; }; pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { @@ -173,13 +180,15 @@ }; &usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbh1>; vbus-supply = <®_usbh1_vbus>; status = "okay"; }; &usbotg { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; + pinctrl-0 = <&pinctrl_cubox_i_usbotg>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; -- cgit v1.2.3 From 962af8612148dad1927ab74707a27cc400103c86 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 23 Aug 2014 10:11:31 +0100 Subject: ARM: dts: hummingboard/cubox-i: change SPDIF output to be more descriptive Signed-off-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-hummingboard.dts | 2 +- arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index d1c892e28296..71598546087f 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -58,7 +58,7 @@ sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; + model = "On-board SPDIF"; /* IMX6 doesn't implement this yet */ spdif-controller = <&spdif>; spdif-out; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 298d0fdf8ebe..6a524ca011e7 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -61,7 +61,7 @@ sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; + model = "Integrated SPDIF"; /* IMX6 doesn't implement this yet */ spdif-controller = <&spdif>; spdif-out; -- cgit v1.2.3 From d5c1eb17ba052966debc4d9d103fc15740b541fa Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 25 Aug 2014 16:15:33 -0700 Subject: ARM: dts: omap3430-sdp: Revert to using software ECC for NAND For v3.14 and prior, 1-bit Hamming code ECC via software was used for NAND on this board. Commit c06c52701695 in v3.15 changed the behaviour to use 1-bit Hamming code via Hardware using a different ECC layout i.e. (ROM code layout) than what is used by software ECC. This ECC layout change causes NAND filesystems created in v3.14 and prior to be unusable in v3.15 and later. So revert back to using software ECC scheme. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3430-sdp.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 02f69f4a8fd3..9bad94efe1c8 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -107,7 +107,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <1 0 0x08000000>; - ti,nand-ecc-opt = "ham1"; + ti,nand-ecc-opt = "sw"; nand-bus-width = <8>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <36>; -- cgit v1.2.3 From e49d519c456f4fb6f4a0473bc04ba30bb805fce5 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 25 Aug 2014 16:15:34 -0700 Subject: ARM: dts: DRA7: fix interrupt-cells for GPIO GPIO modules are also interrupt sources. However, they require both the GPIO number and IRQ type to function properly. By declaring that GPIO uses interrupt-cells=<1>, we essentially do not allow users of the nodes to use the interrupt property appropritely. With this change, the following now works: interrupt-parent = <&gpio6>; interrupts = <5 IRQ_TYPE_LEVEL_LOW>; Fixes: 6e58b8f1daaf ('ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board') Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 97f603c4483d..d678152db4cb 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -245,7 +245,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@48055000 { @@ -256,7 +256,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@48057000 { @@ -267,7 +267,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@48059000 { @@ -278,7 +278,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { @@ -289,7 +289,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { @@ -300,7 +300,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@48051000 { @@ -311,7 +311,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio8: gpio@48053000 { @@ -322,7 +322,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; uart1: serial@4806a000 { -- cgit v1.2.3 From 509a81fd200d64e06990a4a548234cdce51d71ca Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 25 Aug 2014 16:15:34 -0700 Subject: ARM: dts: Remove twl6030 clk32g "regulator" The kernel has never supported clk32g as a regulator since it is a clock and not a regulator. Fortunately nothing actually references this node so we can just remove it. Signed-off-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/twl6030.dtsi | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 2e3bd3172b23..55eb35f068fb 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -83,10 +83,6 @@ regulator-always-on; }; - clk32kg: regulator-clk32kg { - compatible = "ti,twl6030-clk32kg"; - }; - twl_usb_comparator: usb-comparator { compatible = "ti,twl6030-usb"; interrupts = <4>, <10>; -- cgit v1.2.3 From c15adae88327a59f55fea9f84050c68a5e7a1596 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Aug 2014 16:15:35 -0700 Subject: ARM: dts: Enable UART wake-up events for beagleboard For device tree based booting, we need to use wake-up interrupts like we already do for some omaps. This fixes a PM regression on beagleboard compared to legacy booting. Tested-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-beagle.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 3c3e6da1deac..a9aae88b74f5 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -292,6 +292,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; }; &gpio1 { -- cgit v1.2.3 From 8fd46439e1f5a7f86d76a08733459b74debd9468 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 26 Aug 2014 11:51:38 +0300 Subject: ARM: dts: omap54xx-clocks: Fix the l3 and l4 clock rates Similarly to DRA7, OMAP5 has l3 and l4 clock rates incorrectly calculated. Fixed by using proper divider clock types for the clock nodes. Signed-off-by: Tero Kristo Reported-by: Tomi Valkeinen Tested-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap54xx-clocks.dtsi | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index e67a23b5d788..58c27466f012 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -367,10 +367,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; gpu_l3_iclk: gpu_l3_iclk { @@ -383,10 +385,12 @@ l4_root_clk_div: l4_root_clk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <8>; + reg = <0x100>; clocks = <&l3_iclk_div>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; slimbus1_slimbus_clk: slimbus1_slimbus_clk { -- cgit v1.2.3 From bf8147208eab4a026558dcd686f76410de6c1643 Mon Sep 17 00:00:00 2001 From: Rabeeh Khoury Date: Sat, 23 Aug 2014 10:11:21 +0100 Subject: ARM: dts: microsom-ar8035: MDIO pad must be set open drain This patch is important for the MicroSOM implementation due to the following details - 1. VIH of the Atheros phy is 1.7V. 2. NVCC_ENET which is the power domain of the MDIO pad is driven by the PHY's LDO (i.e. either 1.8v or 2.5v). 3. The MicroSOM implements an onbouard 1.6kohm pull up to 3.3v (R3000). In the case the PHY's LDO was 1.8v then there would be only a 100mV margin for the signal to be acknowledged as high (1.8v-1.7v). Due to that setting the pad as an open drain will let the 1.6kohm pull that signal high to 3.3 that assures enough margins to the PHY to be acked as '1' logic. Signed-off-by: Rabeeh Khoury Signed-off-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index d16066608e21..db9f45b2c573 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -17,7 +17,7 @@ enet { pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 /* AR8035 reset */ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 -- cgit v1.2.3 From daebabd578647440d41fc9b48d8c7a88dc2f7ab5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 19 Aug 2014 08:24:05 -0700 Subject: mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators Commit 43fef47f94a1 (mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle) added support for configuring the PMIC to cut off resources during deeper idle states to save power. This however caused regression for n900 display power that needed the PMIC configuration to be disabled with commit d937678ab625 (ARM: dts: Revert enabling of twl configuration for n900). Turns out the root cause of the problem is that we must use TWL4030_RESCONFIG_UNDEF instead of DEV_GRP_NULL to avoid disabling regulators that may have been enabled before the init function for twl4030-power.c runs. With TWL4030_RESCONFIG_UNDEF we let the regulator framework control the regulators like it should. Here we need to only configure the sys_clken and sys_off_mode triggers for the regulators that cannot be done by the regulator framework as it's not running at that point. This allows us to enable the PMIC configuration for n900. Fixes: 43fef47f94a1 (mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle) Cc: stable@vger.kernel.org # v3.16 Signed-off-by: Tony Lindgren Tested-by: Aaro Koskinen Signed-off-by: Lee Jones --- arch/arm/boot/dts/omap3-n900.dts | 2 +- drivers/mfd/twl4030-power.c | 20 ++++++++++---------- 2 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b15f1a77d684..1fe45d1f75ec 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -353,7 +353,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-n900"; + compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; ti,use_poweroff; }; }; diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 3bc969a5916b..4d3ff3771491 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -724,24 +724,24 @@ static struct twl4030_script *omap3_idle_scripts[] = { * above. */ static struct twl4030_resconfig omap3_idle_rconfig[] = { - TWL_REMAP_SLEEP(RES_VAUX1, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VAUX2, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VAUX3, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VAUX4, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VMMC1, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VMMC2, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX1, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX2, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX3, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX4, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VMMC1, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VMMC2, TWL4030_RESCONFIG_UNDEF, 0, 0), TWL_REMAP_OFF(RES_VPLL1, DEV_GRP_P1, 3, 1), TWL_REMAP_SLEEP(RES_VPLL2, DEV_GRP_P1, 0, 0), - TWL_REMAP_SLEEP(RES_VSIM, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VDAC, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VSIM, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VDAC, TWL4030_RESCONFIG_UNDEF, 0, 0), TWL_REMAP_SLEEP(RES_VINTANA1, TWL_DEV_GRP_P123, 1, 2), TWL_REMAP_SLEEP(RES_VINTANA2, TWL_DEV_GRP_P123, 0, 2), TWL_REMAP_SLEEP(RES_VINTDIG, TWL_DEV_GRP_P123, 1, 2), TWL_REMAP_SLEEP(RES_VIO, TWL_DEV_GRP_P123, 2, 2), TWL_REMAP_OFF(RES_VDD1, DEV_GRP_P1, 4, 1), TWL_REMAP_OFF(RES_VDD2, DEV_GRP_P1, 3, 1), - TWL_REMAP_SLEEP(RES_VUSB_1V5, DEV_GRP_NULL, 0, 0), - TWL_REMAP_SLEEP(RES_VUSB_1V8, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VUSB_1V5, TWL4030_RESCONFIG_UNDEF, 0, 0), + TWL_REMAP_SLEEP(RES_VUSB_1V8, TWL4030_RESCONFIG_UNDEF, 0, 0), TWL_REMAP_SLEEP(RES_VUSB_3V1, TWL_DEV_GRP_P123, 0, 0), /* Resource #20 USB charge pump skipped */ TWL_REMAP_SLEEP(RES_REGEN, TWL_DEV_GRP_P123, 2, 1), -- cgit v1.2.3 From a1a57abaaf820a3ed2fe72d70bf52f57a7a5ae21 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 28 Aug 2014 15:45:03 -0500 Subject: ARM: dts: omap4-panda: Fix model and SoC family details Currently we claim that omap4-panda and omap4-panda-es are essentially the same, but they are not since PandaBoard-ES uses OMAP4460 and PandaBoard uses OMAP4430. So, split the common definition and make the model name available. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-panda-common.dtsi | 3 --- arch/arm/boot/dts/omap4-panda-es.dts | 5 +++++ arch/arm/boot/dts/omap4-panda.dts | 5 +++++ 3 files changed, 10 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 8cfa3c8a72b0..150513506c19 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -8,9 +8,6 @@ #include "elpida_ecb240abacn.dtsi" / { - model = "TI OMAP4 PandaBoard"; - compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; - memory { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 816d1c95b592..2f1dabcc6adf 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -10,6 +10,11 @@ #include "omap4460.dtsi" #include "omap4-panda-common.dtsi" +/ { + model = "TI OMAP4 PandaBoard-ES"; + compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; +}; + /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { ti,model = "PandaBoardES"; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 6189a8b77d7f..a0e28b2e254e 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -9,3 +9,8 @@ #include "omap443x.dtsi" #include "omap4-panda-common.dtsi" + +/ { + model = "TI OMAP4 PandaBoard"; + compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; +}; -- cgit v1.2.3 From 9a15fff05b702c3ea29ae64db0d3ff0355431eab Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 3 Sep 2014 11:03:10 -0500 Subject: ARM: dts: am335x-bone*: Fix model name and update compatibility information Beaglebone white and beaglebone black differ in tiny little aspects. This is the reason why we maintain seperate dts for these platforms. However, there is no real way to decode from dtb which platform it is since compatible and model name are the same for both platforms. Fix this so that beaglebone black and beaglebone are identifiable, while maintaining compatibility for older zImages which might use old beaglebone compatible flag for black as well. Reported-by: Tom Rini Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-bone-common.dtsi | 3 --- arch/arm/boot/dts/am335x-bone.dts | 5 +++++ arch/arm/boot/dts/am335x-boneblack.dts | 5 +++++ 3 files changed, 10 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index bde1777b62be..d9d98697cca9 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -7,9 +7,6 @@ */ / { - model = "TI AM335x BeagleBone"; - compatible = "ti,am335x-bone", "ti,am33xx"; - cpus { cpu@0 { cpu0-supply = <&dcdc2_reg>; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 94ee427a6db1..83d40f7655e5 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -10,6 +10,11 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; +}; + &ldo3_reg { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 305975d3f531..901739fcb85a 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -10,6 +10,11 @@ #include "am33xx.dtsi" #include "am335x-bone-common.dtsi" +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + &ldo3_reg { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; -- cgit v1.2.3 From 5081ce621d35b7ba34614415f78f629d26bdc155 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 22 Aug 2014 09:03:50 -0500 Subject: ARM: dts: OMAP3+: Add PRM interrupt Provide OMAP3, 4 and OMAP5 with interrupt number for PRM And for DRA7, provide crossbar number for prm interrupt. Signed-off-by: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 1 + arch/arm/boot/dts/omap3.dtsi | 1 + arch/arm/boot/dts/omap4.dtsi | 1 + arch/arm/boot/dts/omap5.dtsi | 1 + 4 files changed, 4 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index d678152db4cb..e09b1afdaef2 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -89,6 +89,7 @@ prm: prm@4ae06000 { compatible = "ti,dra7-prm"; reg = <0x4ae06000 0x3000>; + interrupts = ; prm_clocks: clocks { #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 575a49bf968d..3136ed1a04ba 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -97,6 +97,7 @@ prm: prm@48306000 { compatible = "ti,omap3-prm"; reg = <0x48306000 0x4000>; + interrupts = <11>; prm_clocks: clocks { #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 69408b53200d..7375d4482bff 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -129,6 +129,7 @@ prm: prm@4a306000 { compatible = "ti,omap4-prm"; reg = <0x4a306000 0x3000>; + interrupts = ; prm_clocks: clocks { #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index fc8df1739f39..df0a09b81ba2 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -131,6 +131,7 @@ prm: prm@4ae06000 { compatible = "ti,omap5-prm"; reg = <0x4ae06000 0x3000>; + interrupts = ; prm_clocks: clocks { #address-cells = <1>; -- cgit v1.2.3