From aa607ebf93a5fc26275a575781399df971dd1b91 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 12 Apr 2012 15:46:49 -0600 Subject: ARM: tegra: add USB ULPI PHY reset GPIO to device tree ULPI PHYs have a reset signal, and different boards use a different GPIO for this task. Add a property to device tree to represent this. I'm not sure if adding this property to the EHCI controller node is entirely correct; perhaps eventually we should have explicit separate nodes for the various PHYs. However, we don't have that right now, so this binding seems like a reasonable choice. Cc: Cc: Greg Kroah-Hartman Cc: Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra-paz00.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot/dts/tegra-paz00.dts') diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 10943fb2561c..fad92f2dbff0 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -351,4 +351,8 @@ linux,default-trigger = "rfkill0"; }; }; + + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + }; }; -- cgit v1.2.3 From 563da21b1d1878736905bbff0f096fcd960d57c5 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 13 Apr 2012 16:35:20 -0600 Subject: ARM: dt: tegra: pinmux changes for USB ULPI Ensure that the USB ULPI signals are not tri-stated, and have no pull- up or pull-down. Ensure that the pingroup hosting the USB ULPI reset signal (GPIO PV0 or PV1 depending on the board, so UAC) is not tri-stated, and has no pull- up or pull-down. This change appears larger than it is due to the grouping and sorting of the pin configuration data. Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra-harmony.dts | 20 ++++++++++---------- arch/arm/boot/dts/tegra-paz00.dts | 14 +++++--------- arch/arm/boot/dts/tegra-trimslice.dts | 18 +++++++++--------- 3 files changed, 24 insertions(+), 28 deletions(-) (limited to 'arch/arm/boot/dts/tegra-paz00.dts') diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 59bf1cf6a65c..6857cec8382d 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -167,28 +167,28 @@ }; conf_ata { nvidia,pins = "ata", "atb", "atc", "atd", "ate", - "cdev1", "dap1", "dtb", "gma", "gmb", - "gmc", "gmd", "gme", "gpu7", "gpv", - "i2cp", "pta", "rm", "slxa", "slxk", - "spia", "spib"; + "cdev1", "cdev2", "dap1", "dtb", "gma", + "gmb", "gmc", "gmd", "gme", "gpu7", + "gpv", "i2cp", "pta", "rm", "slxa", + "slxk", "spia", "spib", "uac"; nvidia,pull = <0>; nvidia,tristate = <0>; }; - conf_cdev2 { - nvidia,pins = "cdev2", "csus", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; - }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; nvidia,pull = <0>; }; + conf_csus { + nvidia,pins = "csus", "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; conf_crtp { nvidia,pins = "crtp", "dap2", "dap3", "dap4", "dtc", "dte", "dtf", "gpu", "sdio1", "slxc", "slxd", "spdi", "spdo", "spig", - "uac", "uda"; + "uda"; nvidia,pull = <0>; nvidia,tristate = <1>; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index fad92f2dbff0..34a917710e09 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -159,18 +159,14 @@ }; conf_ata { nvidia,pins = "ata", "atb", "atc", "atd", "ate", - "cdev1", "dap1", "dap2", "dtf", "gma", - "gmb", "gmc", "gmd", "gme", "gpu", - "gpu7", "gpv", "i2cp", "pta", "rm", - "sdio1", "slxk", "spdo", "uac", "uda"; + "cdev1", "cdev2", "dap1", "dap2", "dtf", + "gma", "gmb", "gmc", "gmd", "gme", + "gpu", "gpu7", "gpv", "i2cp", "pta", + "rm", "sdio1", "slxk", "spdo", "uac", + "uda"; nvidia,pull = <0>; nvidia,tristate = <0>; }; - conf_cdev2 { - nvidia,pins = "cdev2"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts index 71b73aab87ff..e4fcf9a8178a 100644 --- a/arch/arm/boot/dts/tegra-trimslice.dts +++ b/arch/arm/boot/dts/tegra-trimslice.dts @@ -182,23 +182,23 @@ nvidia,tristate = <1>; }; conf_atb { - nvidia,pins = "atb", "cdev1", "dap1", "gma", - "gmc", "gmd", "gpu", "gpu7", "gpv", - "sdio1", "slxa", "slxk", "uac"; + nvidia,pins = "atb", "cdev1", "cdev2", "dap1", + "gma", "gmc", "gmd", "gpu", "gpu7", + "gpv", "sdio1", "slxa", "slxk", "uac"; nvidia,pull = <0>; nvidia,tristate = <0>; }; - conf_cdev2 { - nvidia,pins = "cdev2", "csus", "spia", "spib", - "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; - }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; nvidia,pull = <0>; }; + conf_csus { + nvidia,pins = "csus", "spia", "spib", + "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; conf_ddc { nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd"; nvidia,pull = <2>; -- cgit v1.2.3 From 7f217794ffa72f208a250b79ab0b7ea3de19677f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 13 May 2012 00:14:24 -0400 Subject: mmc: dt: Consolidate DT bindings This patch unifies the current DT MMC bindings documentation and code, adds generic MMC DT bindings documentation, and updates .dts files for consistency. [cjb: typo fixes, addition of max-frequency property] Signed-off-by: Chris Ball Signed-off-by: Arnd Bergmann --- .../devicetree/bindings/mmc/fsl-esdhc.txt | 6 +++-- .../devicetree/bindings/mmc/fsl-imx-esdhc.txt | 2 +- .../devicetree/bindings/mmc/mmc-spi-slot.txt | 3 ++- Documentation/devicetree/bindings/mmc/mmc.txt | 27 ++++++++++++++++++++++ .../devicetree/bindings/mmc/nvidia-sdhci.txt | 4 ++-- .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 4 ++-- arch/arm/boot/dts/imx53-smd.dts | 4 ++-- arch/arm/boot/dts/imx6q-arm2.dts | 2 +- arch/arm/boot/dts/omap3-beagle.dts | 2 +- arch/arm/boot/dts/omap4-panda.dts | 4 ++-- arch/arm/boot/dts/omap4-sdp.dts | 6 ++--- arch/arm/boot/dts/tegra-cardhu.dts | 2 ++ arch/arm/boot/dts/tegra-harmony.dts | 2 ++ arch/arm/boot/dts/tegra-paz00.dts | 2 ++ arch/arm/boot/dts/tegra-seaboard.dts | 2 ++ arch/arm/boot/dts/tegra-ventana.dts | 2 ++ arch/powerpc/boot/dts/mpc8569mds.dts | 1 + drivers/mmc/host/omap_hsmmc.c | 2 +- drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- drivers/mmc/host/sdhci-pltfm.c | 8 +++++-- 20 files changed, 66 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/mmc.txt (limited to 'arch/arm/boot/dts/tegra-paz00.dts') diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt index 64bcb8be973c..0d93b4b0e0e3 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt @@ -11,9 +11,11 @@ Required properties: - interrupt-parent : interrupt source phandle. - clock-frequency : specifies eSDHC base clock frequency. - sdhci,wp-inverted : (optional) specifies that eSDHC controller - reports inverted write-protect state; + reports inverted write-protect state; New devices should use + the generic "wp-inverted" property. - sdhci,1-bit-only : (optional) specifies that a controller can - only handle 1-bit data transfers. + only handle 1-bit data transfers. New devices should use the + generic "bus-width = <1>" property. - sdhci,auto-cmd12: (optional) specifies that a controller can only handle auto CMD12. diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index ab22fe6e73ab..c7e404b3ef05 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -9,7 +9,7 @@ Required properties: - interrupts : Should contain eSDHC interrupt Optional properties: -- fsl,card-wired : Indicate the card is wired to host permanently +- non-removable : Indicate the card is wired to host permanently - fsl,cd-internal : Indicate to use controller internal card detection - fsl,wp-internal : Indicate to use controller internal write protection - cd-gpios : Specify GPIOs for card detection diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt index 89a0084df2f7..d64aea5a4203 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt @@ -10,7 +10,8 @@ Required properties: Optional properties: - gpios : may specify GPIOs in this order: Card-Detect GPIO, - Write-Protect GPIO. + Write-Protect GPIO. Note that this does not follow the + binding from mmc.txt, for historic reasons. - interrupts : the interrupt of a card detect interrupt. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt new file mode 100644 index 000000000000..6e70dcde0a71 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -0,0 +1,27 @@ +These properties are common to multiple MMC host controllers. Any host +that requires the respective functionality should implement them using +these definitions. + +Required properties: +- bus-width: Number of data lines, can be <1>, <4>, or <8> + +Optional properties: +- cd-gpios : Specify GPIOs for card detection, see gpio binding +- wp-gpios : Specify GPIOs for write protection, see gpio binding +- cd-inverted: when present, polarity on the wp gpio line is inverted +- wp-inverted: when present, polarity on the wp gpio line is inverted +- non-removable: non-removable slot (like eMMC) +- max-frequency: maximum operating clock frequency + +Example: + +sdhci@ab000000 { + compatible = "sdhci"; + reg = <0xab000000 0x200>; + interrupts = <23>; + bus-width = <4>; + cd-gpios = <&gpio 69 0>; + cd-inverted; + wp-gpios = <&gpio 70 0>; + max-frequency = <50000000>; +} diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt index 7e51154679a6..f77c3031607f 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt @@ -7,12 +7,12 @@ Required properties: - compatible : Should be "nvidia,-sdhci" - reg : Should contain SD/MMC registers location and length - interrupts : Should contain SD/MMC interrupt +- bus-width : Number of data lines, can be <1>, <4>, or <8> Optional properties: - cd-gpios : Specify GPIOs for card detection - wp-gpios : Specify GPIOs for write protection - power-gpios : Specify GPIOs for power control -- support-8bit : Boolean, indicates if 8-bit mode should be used. Example: @@ -23,5 +23,5 @@ sdhci@c8000200 { cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ - support-8bit; + bus-width = <8>; }; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index dbd4368ab8cc..8a53958c9a9f 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -15,7 +15,7 @@ Optional properties: ti,dual-volt: boolean, supports dual voltage cards -supply: phandle to the regulator device tree node "supply-name" examples are "vmmc", "vmmc_aux" etc -ti,bus-width: Number of data lines, default assumed is 1 if the property is missing. +bus-width: Number of data lines, default assumed is 1 if the property is missing. cd-gpios: GPIOs for card detection wp-gpios: GPIOs for write protection ti,non-removable: non-removable slot (like eMMC) @@ -27,7 +27,7 @@ Example: reg = <0x4809c000 0x400>; ti,hwmods = "mmc1"; ti,dual-volt; - ti,bus-width = <4>; + bus-width = <4>; vmmc-supply = <&vmmc>; /* phandle to regulator node */ ti,non-removable; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index c7ee86c2dfb5..139138a556b0 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -35,7 +35,7 @@ }; esdhc@50008000 { /* ESDHC2 */ - fsl,card-wired; + non-removable; status = "okay"; }; @@ -76,7 +76,7 @@ }; esdhc@50020000 { /* ESDHC3 */ - fsl,card-wired; + non-removable; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index ce1c8238c897..d2eaf521c9fd 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -41,7 +41,7 @@ }; usdhc@0219c000 { /* uSDHC4 */ - fsl,card-wired; + non-removable; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 8c756be4d7ad..5b4506c0a8c4 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -57,7 +57,7 @@ &mmc1 { vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - ti,bus-width = <8>; + bus-width = <8>; }; &mmc2 { diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index ea6f5bb8a120..31fb4218d3ae 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -55,7 +55,7 @@ &mmc1 { vmmc-supply = <&vmmc>; - ti,bus-width = <8>; + bus-width = <8>; }; &mmc2 { @@ -72,5 +72,5 @@ &mmc5 { ti,non-removable; - ti,bus-width = <4>; + bus-width = <4>; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 67b2e98074c6..a1dd873425fc 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -94,12 +94,12 @@ &mmc1 { vmmc-supply = <&vmmc>; - ti,bus-width = <8>; + bus-width = <8>; }; &mmc2 { vmmc-supply = <&vaux1>; - ti,bus-width = <8>; + bus-width = <8>; ti,non-removable; }; @@ -112,6 +112,6 @@ }; &mmc5 { - ti,bus-width = <4>; + bus-width = <4>; ti,non-removable; }; diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts index ac3fb7558459..67c6511f6372 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra-cardhu.dts @@ -54,6 +54,7 @@ cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; }; sdhci@78000200 { @@ -66,5 +67,6 @@ sdhci@78000400 { support-8bit; + bus-width = <8>; }; }; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 6e8447dc0202..e9cae68861de 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -100,6 +100,7 @@ cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 155 0>; /* gpio PT3 */ + bus-width = <4>; }; sdhci@c8000400 { @@ -111,5 +112,6 @@ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ support-8bit; + bus-width = <8>; }; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 6c02abb469d4..03d3d7994da7 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -97,6 +97,7 @@ cd-gpios = <&gpio 173 0>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 169 0>; /* gpio PV1 */ + bus-width = <4>; }; sdhci@c8000200 { @@ -109,6 +110,7 @@ sdhci@c8000600 { support-8bit; + bus-width = <8>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index dbf1c5a171c2..8decf7229973 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -104,10 +104,12 @@ cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; }; sdhci@c8000600 { support-8bit; + bus-width = <8>; }; usb@c5000000 { diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts index 2dcff8728e90..29e54c7a3657 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra-ventana.dts @@ -100,9 +100,11 @@ cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; }; sdhci@c8000600 { support-8bit; + bus-width = <8>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 7e283c891b7f..fe0d60935e9b 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -119,6 +119,7 @@ sdhc@2e000 { status = "disabled"; sdhci,1-bit-only; + bus-width = <1>; }; par_io@e0100 { diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 56d4499d4388..33e81c24e140 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1766,7 +1766,7 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev) pdata->slots[0].nonremovable = true; pdata->slots[0].no_regulator_off_init = true; } - of_property_read_u32(np, "ti,bus-width", &bus_width); + of_property_read_u32(np, "bus-width", &bus_width); if (bus_width == 4) pdata->slots[0].caps |= MMC_CAP_4_BIT_DATA; else if (bus_width == 8) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 8abdaf6697a8..0d2b082f2246 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -402,7 +402,7 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, if (!np) return -ENODEV; - if (of_get_property(np, "fsl,card-wired", NULL)) + if (of_get_property(np, "non-removable", NULL)) boarddata->cd_type = ESDHC_CD_PERMANENT; if (of_get_property(np, "fsl,cd-controller", NULL)) diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index c5c2a48bdd94..d9a4ef4f1ed0 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -42,7 +42,8 @@ static struct sdhci_ops sdhci_pltfm_ops = { #ifdef CONFIG_OF static bool sdhci_of_wp_inverted(struct device_node *np) { - if (of_get_property(np, "sdhci,wp-inverted", NULL)) + if (of_get_property(np, "sdhci,wp-inverted", NULL) || + of_get_property(np, "wp-inverted", NULL)) return true; /* Old device trees don't have the wp-inverted property. */ @@ -59,13 +60,16 @@ void sdhci_get_of_property(struct platform_device *pdev) struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); const __be32 *clk; + u32 bus_width; int size; if (of_device_is_available(np)) { if (of_get_property(np, "sdhci,auto-cmd12", NULL)) host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; - if (of_get_property(np, "sdhci,1-bit-only", NULL)) + if (of_get_property(np, "sdhci,1-bit-only", NULL) || + (of_property_read_u32(np, "bus-width", &bus_width) == 0 && + bus_width == 1)) host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; if (sdhci_of_wp_inverted(np)) -- cgit v1.2.3