From 35b5da7b0abfda695924bef011995031f4f3dcfe Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 3 Jun 2014 15:54:19 +0900 Subject: ARM: shmobile: r8a7790: add USB3.0 clocks to device tree Signed-off-by: Yoshihiro Shimoda Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot/dts/r8a7790.dtsi') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 7ff29601f962..e2c7d6df5be4 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -754,17 +754,17 @@ reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>, - <&hp_clk>, <&hp_clk>, <&rclk_clk>; + <&hp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 - R8A7790_CLK_IIC0 R8A7790_CLK_IIC1 R8A7790_CLK_CMT1 + R8A7790_CLK_IIC0 R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1 >; clock-output-names = "iic2", "tpu0", "mmcif1", "sdhi3", "sdhi2", "sdhi1", "sdhi0", "mmcif0", - "iic0", "iic1", "cmt1"; + "iic0", "iic1", "ssusb", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; -- cgit v1.2.3 From b989e1386385466761f703b8a91e00468bb5ca2a Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 3 Jun 2014 21:02:24 +0900 Subject: ARM: shmobile: r8a7790/lager dts: Add DVFS parameters into cpu0 node for r8a7790 Add needed information inside CPU0 for the generic cpufreq-cpu0 driver. - voltage-tolerance = 1% It reflects the tolerance for the CPU voltage defined inside the OPP table. Due to the lack of proper OPP definition, use an arbitrary safe value. - clock-latency = 300 us Approximate worst-case latency to do a full DVFS transition for every OPPs. Due to the lack of HW information, use an arbitrary safe value. Note: The term transition-latency will be more accurate to define this value since the clock transition latency is not the only parameter that will define the overall DVFS transition. - operating-points = < kHz - uV > List of 6 operating points. All of them are using the same voltage since the valid Vmin voltage is not documented in the HW spec. - clocks phandle to the CPU clock source. This clock source is used for all the 4 CortexA15 located inside the same cluster. Signed-off-by: Benoit Cousson [gaku.inami.xw@bp.renesas.com: Change the setting of OPPs for ES2.0] Signed-off-by: Gaku Inami Acked-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 4 ++++ arch/arm/boot/dts/r8a7790.dtsi | 11 +++++++++++ 2 files changed, 15 insertions(+) (limited to 'arch/arm/boot/dts/r8a7790.dtsi') diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 6472cf0914e2..cc65e3f96f08 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -338,3 +338,7 @@ regulator-always-on; }; }; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index e2c7d6df5be4..e990d3c4fe62 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -44,6 +44,17 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1300000000>; + voltage-tolerance = <1>; /* 1% */ + clocks = <&cpg_clocks R8A7790_CLK_Z>; + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu1: cpu@1 { -- cgit v1.2.3 From bcde37225438687231bb9510c07e60dcb8db1988 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 10 Jun 2014 23:53:27 -0700 Subject: ARM: shmobile: r8a7790: add MSTP10 support on DTSI Signed-off-by: Kuninori Morimoto Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 33 +++++++++++++++++++++++++++++++ include/dt-bindings/clock/r8a7790-clock.h | 26 ++++++++++++++++++++++++ 2 files changed, 59 insertions(+) (limited to 'arch/arm/boot/dts/r8a7790.dtsi') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index e990d3c4fe62..0f83bd778a3d 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -835,6 +835,39 @@ "rcan1", "rcan0", "qspi_mod", "iic3", "i2c3", "i2c2", "i2c1", "i2c0"; }; + mstp10_clks: mstp10_clks@e6150998 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; + clocks = <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>; + + #clock-cells = <1>; + clock-indices = < + R8A7790_CLK_SSI_ALL + R8A7790_CLK_SSI9 R8A7790_CLK_SSI8 R8A7790_CLK_SSI7 R8A7790_CLK_SSI6 R8A7790_CLK_SSI5 + R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0 + R8A7790_CLK_SCU_ALL + R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0 + R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5 + R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0 + >; + clock-output-names = + "ssi-all", + "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", + "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", + "scu-all", + "scu-dvc1", "scu-dvc0", + "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", + "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; + }; }; qspi: spi@e6b10000 { diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index 1118f7a4bca6..a16df68ac97d 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -107,4 +107,30 @@ #define R8A7790_CLK_I2C1 30 #define R8A7790_CLK_I2C0 31 +/* MSTP10 */ +#define R8A7790_CLK_SSI_ALL 5 +#define R8A7790_CLK_SSI9 6 +#define R8A7790_CLK_SSI8 7 +#define R8A7790_CLK_SSI7 8 +#define R8A7790_CLK_SSI6 9 +#define R8A7790_CLK_SSI5 10 +#define R8A7790_CLK_SSI4 11 +#define R8A7790_CLK_SSI3 12 +#define R8A7790_CLK_SSI2 13 +#define R8A7790_CLK_SSI1 14 +#define R8A7790_CLK_SSI0 15 +#define R8A7790_CLK_SCU_ALL 17 +#define R8A7790_CLK_SCU_DVC1 18 +#define R8A7790_CLK_SCU_DVC0 19 +#define R8A7790_CLK_SCU_SRC9 22 +#define R8A7790_CLK_SCU_SRC8 23 +#define R8A7790_CLK_SCU_SRC7 24 +#define R8A7790_CLK_SCU_SRC6 25 +#define R8A7790_CLK_SCU_SRC5 26 +#define R8A7790_CLK_SCU_SRC4 27 +#define R8A7790_CLK_SCU_SRC3 28 +#define R8A7790_CLK_SCU_SRC2 29 +#define R8A7790_CLK_SCU_SRC1 30 +#define R8A7790_CLK_SCU_SRC0 31 + #endif /* __DT_BINDINGS_CLOCK_R8A7790_H__ */ -- cgit v1.2.3 From 7df2fd572b9f159657a145f3fdd700d3e00760d9 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 10 Jun 2014 23:53:54 -0700 Subject: ARM: shmobile: r8a7790: add R-Car sound support on DTSI This patch support PIO transfer only at this point Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 56 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) (limited to 'arch/arm/boot/dts/r8a7790.dtsi') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 0f83bd778a3d..29907c9d8e5b 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -920,4 +920,60 @@ #size-cells = <0>; status = "disabled"; }; + + rcar_sound: rcar_sound@0xec500000 { + #sound-dai-cells = <1>; + compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; + interrupt-parent = <&gic>; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x1280>; /* SSI */ + clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>, + <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>, + <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>, + <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>, + <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>, + <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>, + <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>, + <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>, + <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>, + <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>, + <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", "src.5", + "src.4", "src.3", "src.2", "src.1", "src.0", + "clk_a", "clk_b", "clk_c", "clk_i"; + + status = "disabled"; + + rcar_sound,src { + src0: src@0 { }; + src1: src@1 { }; + src2: src@2 { }; + src3: src@3 { }; + src4: src@4 { }; + src5: src@5 { }; + src6: src@6 { }; + src7: src@7 { }; + src8: src@8 { }; + src9: src@9 { }; + }; + + rcar_sound,ssi { + ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; }; + ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; }; + ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; }; + ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; }; + ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; }; + ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; }; + ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; }; + ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; }; + ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; }; + ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; }; + }; + }; }; -- cgit v1.2.3 From ecafea8cd261833d7bb857aad76cf2e721821e88 Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Fri, 13 Jun 2014 10:37:15 +0100 Subject: ARM: shmobile: r8a7790: Add PCIEC clock device tree node This patch adds the device tree clock node for the PCIe Controller Signed-off-by: Phil Edworthy Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 6 +++--- include/dt-bindings/clock/r8a7790-clock.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot/dts/r8a7790.dtsi') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 29907c9d8e5b..9df57122e9c0 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -765,17 +765,17 @@ reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>, - <&hp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>; + <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 - R8A7790_CLK_IIC0 R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1 + R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1 >; clock-output-names = "iic2", "tpu0", "mmcif1", "sdhi3", "sdhi2", "sdhi1", "sdhi0", "mmcif0", - "iic0", "iic1", "ssusb", "cmt1"; + "iic0", "pciec", "iic1", "ssusb", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index a16df68ac97d..f929a79e6998 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -59,6 +59,7 @@ #define R8A7790_CLK_SDHI0 14 #define R8A7790_CLK_MMCIF0 15 #define R8A7790_CLK_IIC0 18 +#define R8A7790_CLK_PCIEC 19 #define R8A7790_CLK_IIC1 23 #define R8A7790_CLK_SSUSB 28 #define R8A7790_CLK_CMT1 29 -- cgit v1.2.3 From 51d17918077215cd93d78a2b13a3b57090eb1f3d Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Fri, 13 Jun 2014 10:37:16 +0100 Subject: ARM: shmobile: r8a7790: Add default PCIe bus clock This patch adds a default PCIe bus clock node. Signed-off-by: Phil Edworthy Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot/dts/r8a7790.dtsi') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 9df57122e9c0..2c55c4b8295f 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -487,6 +487,15 @@ clock-output-names = "extal"; }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "pcie_bus"; + status = "disabled"; + }; + /* * The external audio clocks are configured as 0 Hz fixed frequency clocks by * default. Boards that provide audio clocks should override them. -- cgit v1.2.3 From 745329d280c8c73f00724745693658f3d4113ea8 Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Fri, 13 Jun 2014 10:37:17 +0100 Subject: ARM: shmobile: r8a7790: Add PCIe Controller device node Signed-off-by: Phil Edworthy [horms+renesas@verge.net.au: resolved conflict] Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch/arm/boot/dts/r8a7790.dtsi') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 2c55c4b8295f..994330e81a52 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -930,6 +930,31 @@ status = "disabled"; }; + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7790"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 + 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>; + interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>, + <0 117 IRQ_TYPE_LEVEL_HIGH>, + <0 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + status = "disabled"; + }; + rcar_sound: rcar_sound@0xec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; -- cgit v1.2.3 From ff4f3eb8b3386208944fe60b85e6cba4d338198e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 24 Jun 2014 21:59:54 +0400 Subject: ARM: shmobile: r8a7790: add internal PCI bridge nodes Add device nodes for the R8A7790 internal PCI bridge devices. Signed-off-by: Ben Dooks Reviewed-by: Ian Molton [Sergei: added several properties to the PCI bridge nodes] Signed-off-by: Sergei Shtylyov Acked-by: Arnd Bergmann Tested-by: Yoshihiro Shimoda Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) (limited to 'arch/arm/boot/dts/r8a7790.dtsi') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 994330e81a52..373d9a21c912 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -930,6 +930,66 @@ status = "disabled"; }; + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7790"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci1: pci@ee0b0000 { + compatible = "renesas,pci-r8a7790"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + reg = <0 0xee0b0000 0 0xc00>, + <0 0xee0a0000 0 0x1100>; + interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci2: pci@ee0d0000 { + compatible = "renesas,pci-r8a7790"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <2 2>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + }; + pciec: pcie@fe000000 { compatible = "renesas,pcie-r8a7790"; reg = <0 0xfe000000 0 0x80000>; -- cgit v1.2.3 From 334d69a23b177a4ed38e654912444dc48ac46765 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 25 Jun 2014 17:52:17 -0700 Subject: ARM: shmobile: r8a7790: add DVC support for sound node on DTSI Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm/boot/dts/r8a7790.dtsi') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 373d9a21c912..bdcb7f08fcc5 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1034,16 +1034,23 @@ <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>, <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>, <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>, + <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; clock-names = "ssi-all", "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", "src.9", "src.8", "src.7", "src.6", "src.5", "src.4", "src.3", "src.2", "src.1", "src.0", + "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; status = "disabled"; + rcar_sound,dvc { + dvc0: dvc@0 { }; + dvc1: dvc@1 { }; + }; + rcar_sound,src { src0: src@0 { }; src1: src@1 { }; -- cgit v1.2.3 From 517ec80a3321e01fd07eeb6098c3d7b455fcca68 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 30 Jun 2014 11:49:53 +0200 Subject: ARM: shmobile: r8a7790: Fix whitespace errors in pci nodes Remove spaces in between tabs. Introduced by commit ff4f3eb8b3386208944fe60b85e6cba4d338198e ("ARM: shmobile: r8a7790: add internal PCI bridge nodes"). Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm/boot/dts/r8a7790.dtsi') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index bdcb7f08fcc5..d9ddecbb859c 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -946,8 +946,8 @@ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; }; pci1: pci@ee0b0000 { @@ -966,8 +966,8 @@ ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>; + 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>; }; pci2: pci@ee0d0000 { @@ -986,8 +986,8 @@ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; interrupt-map-mask = <0xff00 0 0 0x7>; interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; }; pciec: pcie@fe000000 { -- cgit v1.2.3