From 8d386fa04d2f652d3d8e2a5d82e25f20a8467bfb Mon Sep 17 00:00:00 2001 From: Philippe Schenker Date: Fri, 6 May 2022 15:24:08 +0200 Subject: ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signaling Due to many carrier boards pulling the usdhc1 signals up to 3.3 volt we need to disable 1.8 volt signaling. Adding the no-1-8-v property basically disables UHS-I modes by default. Also pull-up the command and data lines to the +V3.3_1.8_SD rail and set them to the 200 MHz speed grade (e.g. pinmux bits 7-6: meaning 11 SPEED_3_max_200MHz). Explicitly specify a bus-width of <4> in the module-level device tree include file and drop the no-1-8-v property from the carrier boards device trees. Signed-off-by: Philippe Schenker Signed-off-by: Denys Drozdov Signed-off-by: Andrejs Cainikovs Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ull-colibri.dtsi | 36 ++++++++++++++++++++++------------ 1 file changed, 24 insertions(+), 12 deletions(-) (limited to 'arch/arm/boot/dts/imx6ull-colibri.dtsi') diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index c89b209be316..351ea2acd5a6 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -35,7 +35,7 @@ regulator-max-microvolt = <3300000>; }; - reg_sd1_vmmc: regulator-sd1-vmmc { + reg_sd1_vqmmc: regulator-sd1-vqmmc { compatible = "regulator-gpio"; gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; @@ -232,9 +232,21 @@ }; &usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>; assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>; assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; assigned-clock-rates = <0>, <198000000>; + bus-width = <4>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + disable-wp; + keep-power-in-suspend; + no-1-8-v; + vqmmc-supply = <®_sd1_vqmmc>; + wakeup-source; }; &wdog1 { @@ -550,8 +562,8 @@ pinctrl_usdhc1: usdhc1-grp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 /* SODIMM 47 */ - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 /* SODIMM 190 */ + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 /* SODIMM 47 */ + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 /* SODIMM 190 */ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 /* SODIMM 192 */ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 /* SODIMM 49 */ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 /* SODIMM 51 */ @@ -561,8 +573,8 @@ pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170b9 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 @@ -572,12 +584,12 @@ pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170f9 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100f9 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 >; }; @@ -588,7 +600,7 @@ MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17069 MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17069 MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17069 - MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17069 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10069 MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10 >; -- cgit v1.2.3