From bbc741c6f46799aa8979d0a4cba6a47b886b4def Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Tue, 20 Dec 2016 17:45:31 +1030 Subject: mfd: dt: Fix "indicates" typo in mfd bindings document Signed-off-by: Andrew Jeffery Acked-by: Linus Walleij Acked-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/mfd.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt index af9d6931a1a2..f1fceeda12f1 100644 --- a/Documentation/devicetree/bindings/mfd/mfd.txt +++ b/Documentation/devicetree/bindings/mfd/mfd.txt @@ -19,7 +19,7 @@ Optional properties: - compatible : "simple-mfd" - this signifies that the operating system should consider all subnodes of the MFD device as separate devices akin to how - "simple-bus" inidicates when to see subnodes as children for a simple + "simple-bus" indicates when to see subnodes as children for a simple memory-mapped bus. For more complex devices, when the nexus driver has to probe registers to figure out what child devices exist etc, this should not be used. In the latter case the child devices will be determined by the -- cgit v1.2.3 From 0894e9875cff7bcd2a7cb732e84626f320caae96 Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Tue, 20 Dec 2016 17:45:32 +1030 Subject: mfd: dt: Add ranges, #address-cells and #size-cells as optional properties Whilst describing a device and not a bus, simple-mfd is modelled on simple-bus where child nodes are iterated and registered as platform devices. Some complex devices, e.g. the Aspeed LPC controller, can benefit from address space mapping such that child nodes can use the regs property to describe their resource offsets within the multi-function device. Signed-off-by: Andrew Jeffery Acked-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/mfd.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt index f1fceeda12f1..bcb6abb9d413 100644 --- a/Documentation/devicetree/bindings/mfd/mfd.txt +++ b/Documentation/devicetree/bindings/mfd/mfd.txt @@ -25,6 +25,16 @@ Optional properties: be used. In the latter case the child devices will be determined by the operating system. +- ranges: Describes the address mapping relationship to the parent. Should set + the child's base address to 0, the physical address within parent's address + space, and the length of the address map. + +- #address-cells: Specifies the number of cells used to represent physical base + addresses. Must be present if ranges is used. + +- #size-cells: Specifies the number of cells used to represent the size of an + address. Must be present if ranges is used. + Example: foo@1000 { -- cgit v1.2.3 From 28fe081612307067f8183437c8b6ef722dcaa871 Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Tue, 20 Dec 2016 17:45:33 +1030 Subject: mfd: dt: Add Aspeed Low Pin Count Controller bindings Signed-off-by: Andrew Jeffery Reviewed-by: Linus Walleij Reviewed-by: Joel Stanley Acked-by: Rob Herring Signed-off-by: Lee Jones --- .../devicetree/bindings/mfd/aspeed-lpc.txt | 111 +++++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-lpc.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt new file mode 100644 index 000000000000..a97131aba446 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt @@ -0,0 +1,111 @@ +====================================================================== +Device tree bindings for the Aspeed Low Pin Count (LPC) Bus Controller +====================================================================== + +The LPC bus is a means to bridge a host CPU to a number of low-bandwidth +peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The +primary use case of the Aspeed LPC controller is as a slave on the bus +(typically in a Baseboard Management Controller SoC), but under certain +conditions it can also take the role of bus master. + +The LPC controller is represented as a multi-function device to account for the +mix of functionality it provides. The principle split is between the register +layout at the start of the I/O space which is, to quote the Aspeed datasheet, +"basically compatible with the [LPC registers from the] popular BMC controller +H8S/2168[1]", and everything else, where everything else is an eclectic +collection of functions with a esoteric register layout. "Everything else", +here labeled the "host" portion of the controller, includes, but is not limited +to: + +* An IPMI Block Transfer[2] Controller + +* An LPC Host Controller: Manages LPC functions such as host vs slave mode, the + physical properties of some LPC pins, configuration of serial IRQs, and + APB-to-LPC bridging amonst other functions. + +* An LPC Host Interface Controller: Manages functions exposed to the host such + as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART + management and bus snoop configuration. + +* A set of SuperIO[3] scratch registers: Enables implementation of e.g. custom + hardware management protocols for handover between the host and baseboard + management controller. + +Additionally the state of the LPC controller influences the pinmux +configuration, therefore the host portion of the controller is exposed as a +syscon as a means to arbitrate access. + +[0] http://www.intel.com/design/chipsets/industry/25128901.pdf +[1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4 +[2] http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf +[3] https://en.wikipedia.org/wiki/Super_I/O + +Required properties +=================== + +- compatible: One of: + "aspeed,ast2400-lpc", "simple-mfd" + "aspeed,ast2500-lpc", "simple-mfd" + +- reg: contains the physical address and length values of the Aspeed + LPC memory region. + +- #address-cells: <1> +- #size-cells: <1> +- ranges: Maps 0 to the physical address and length of the LPC memory + region + +Required LPC Child nodes +======================== + +BMC Node +-------- + +- compatible: One of: + "aspeed,ast2400-lpc-bmc" + "aspeed,ast2500-lpc-bmc" + +- reg: contains the physical address and length values of the + H8S/2168-compatible LPC controller memory region + +Host Node +--------- + +- compatible: One of: + "aspeed,ast2400-lpc-host", "simple-mfd", "syscon" + "aspeed,ast2500-lpc-host", "simple-mfd", "syscon" + +- reg: contains the address and length values of the host-related + register space for the Aspeed LPC controller + +- #address-cells: <1> +- #size-cells: <1> +- ranges: Maps 0 to the address and length of the host-related LPC memory + region + +Example: + +lpc: lpc@1e789000 { + compatible = "aspeed,ast2500-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_bmc: lpc-bmc@0 { + compatible = "aspeed,ast2500-lpc-bmc"; + reg = <0x0 0x80>; + }; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80 0x1e0>; + }; +}; + -- cgit v1.2.3 From 73bee1d330a80943f1d0e13d32a739b80e44a470 Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Tue, 20 Dec 2016 17:45:34 +1030 Subject: mfd: dt: Add bindings for the Aspeed LPC Host Controller (LHC) The LPC bus pinmux configuration on fifth generation Aspeed SoCs depends on bits in both the System Control Unit and the LPC Host Controller. The Aspeed LPC Host Controller is described as a child node of the LPC host-range syscon device for arbitration of access by the host controller and pinmux drivers. Signed-off-by: Andrew Jeffery Reviewed-by: Linus Walleij Acked-by: Rob Herring Signed-off-by: Lee Jones --- .../devicetree/bindings/mfd/aspeed-lpc.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt index a97131aba446..514d82ced95b 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt @@ -109,3 +109,29 @@ lpc: lpc@1e789000 { }; }; +Host Node Children +================== + +LPC Host Controller +------------------- + +The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour +between the host and the baseboard management controller. The registers exist +in the "host" portion of the Aspeed LPC controller, which must be the parent of +the LPC host controller node. + +Required properties: + +- compatible: One of: + "aspeed,ast2400-lhc"; + "aspeed,ast2500-lhc"; + +- reg: contains offset/length values of the LHC memory regions. In the + AST2400 and AST2500 there are two regions. + +Example: + +lhc: lhc@20 { + compatible = "aspeed,ast2500-lhc"; + reg = <0x20 0x24 0x48 0x8>; +}; -- cgit v1.2.3 From 0f1747692ccc06fff9a5eb975b2a5cf92cec4030 Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Tue, 20 Dec 2016 17:45:35 +1030 Subject: mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX) The Aspeed SoC Display Controller is presented as a syscon device to arbitrate access by display and pinmux drivers. Video pinmux configuration on fifth generation SoCs depends on bits in both the System Control Unit and the Display Controller. Signed-off-by: Andrew Jeffery Acked-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/aspeed-gfx.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-gfx.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt new file mode 100644 index 000000000000..aea5370efd97 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt @@ -0,0 +1,17 @@ +* Device tree bindings for Aspeed SoC Display Controller (GFX) + +The Aspeed SoC Display Controller primarily does as its name suggests, but also +participates in pinmux requests on the g5 SoCs. It is therefore considered a +syscon device. + +Required properties: +- compatible: "aspeed,ast2500-gfx", "syscon" +- reg: contains offset/length value of the GFX memory + region. + +Example: + +gfx: display@1e6e6000 { + compatible = "aspeed,ast2500-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; +}; -- cgit v1.2.3 From 05daab3d63700316a04c417996600f5596d2484c Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Mon, 23 Jan 2017 11:54:43 +0800 Subject: Documentation: devicetree: Add LED subnode binding for MT6323 PMIC This patch adds documentation for devicetree bindings for LED support as the subnode of MT6323 PMIC Signed-off-by: Sean Wang Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/mt6397.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index 949c85f8d02c..c568d52af5af 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -34,6 +34,10 @@ Optional subnodes: - clk Required properties: - compatible: "mediatek,mt6397-clk" +- led + Required properties: + - compatible: "mediatek,mt6323-led" + see Documentation/devicetree/bindings/leds/leds-mt6323.txt Example: pwrap: pwrap@1000f000 { -- cgit v1.2.3 From 56e1d40d3beab2f247d48574bf51fc5daeebc285 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 5 Jan 2017 16:44:39 -0800 Subject: mfd: cpcap: Add minimal support Many Motorola phones like droid 4 are using a custom PMIC called CPCAP or 6556002. We can support it's core features quite easily with regmap_spi and regmap_irq. The children of cpcap, such as regulators, ADC and USB, can be just regular device drivers and defined in the dts file. They get probed as we call of_platform_populate() at the end of our probe, and then the children can just call dev_get_regmap(dev.parent, NULL) to get the regmap. Cc: devicetree@vger.kernel.org Cc: Marcel Partap Cc: Mark Rutland Cc: Michael Scott Acked-by: Rob Herring Signed-off-by: Tony Lindgren Signed-off-by: Lee Jones --- .../devicetree/bindings/mfd/motorola-cpcap.txt | 31 +++ drivers/mfd/Kconfig | 11 + drivers/mfd/Makefile | 1 + drivers/mfd/motorola-cpcap.c | 259 ++++++++++++++++++ include/linux/mfd/motorola-cpcap.h | 292 +++++++++++++++++++++ 5 files changed, 594 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/motorola-cpcap.txt create mode 100644 drivers/mfd/motorola-cpcap.c create mode 100644 include/linux/mfd/motorola-cpcap.h (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt new file mode 100644 index 000000000000..15bc885f9df4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt @@ -0,0 +1,31 @@ +Motorola CPCAP PMIC device tree binding + +Required properties: +- compatible : One or both of "motorola,cpcap" or "ste,6556002" +- reg : SPI chip select +- interrupt-parent : The parent interrupt controller +- interrupts : The interrupt line the device is connected to +- interrupt-controller : Marks the device node as an interrupt controller +- #interrupt-cells : The number of cells to describe an IRQ, should be 2 +- #address-cells : Child device offset number of cells, should be 1 +- #size-cells : Child device size number of cells, should be 0 +- spi-max-frequency : Typically set to 3000000 +- spi-cs-high : SPI chip select direction + +Example: + +&mcspi1 { + cpcap: pmic@0 { + compatible = "motorola,cpcap", "ste,6556002"; + reg = <0>; /* cs0 */ + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <3000000>; + spi-cs-high; + }; +}; + diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index dbebe20c6d6d..496247a7f893 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -715,6 +715,17 @@ config EZX_PCAP This enables the PCAP ASIC present on EZX Phones. This is needed for MMC, TouchScreen, Sound, USB, etc.. +config MFD_CPCAP + tristate "Support for Motorola CPCAP" + depends on SPI + depends on OF || COMPILE_TEST + select REGMAP_SPI + select REGMAP_IRQ + help + Say yes here if you want to include driver for CPCAP. + It is used on many Motorola phones and tablets as a PMIC. + At least Motorola Droid 4 is known to use CPCAP. + config MFD_VIPERBOARD tristate "Nano River Technologies Viperboard" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 876ca8600c51..31ce07611a6f 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -97,6 +97,7 @@ obj-$(CONFIG_MFD_MC13XXX_I2C) += mc13xxx-i2c.o obj-$(CONFIG_MFD_CORE) += mfd-core.o obj-$(CONFIG_EZX_PCAP) += ezx-pcap.o +obj-$(CONFIG_MFD_CPCAP) += motorola-cpcap.o obj-$(CONFIG_MCP) += mcp-core.o obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o diff --git a/drivers/mfd/motorola-cpcap.c b/drivers/mfd/motorola-cpcap.c new file mode 100644 index 000000000000..6aeada7d7ce5 --- /dev/null +++ b/drivers/mfd/motorola-cpcap.c @@ -0,0 +1,259 @@ +/* + * Motorola CPCAP PMIC core driver + * + * Copyright (C) 2016 Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define CPCAP_NR_IRQ_REG_BANKS 6 +#define CPCAP_NR_IRQ_CHIPS 3 + +struct cpcap_ddata { + struct spi_device *spi; + struct regmap_irq *irqs; + struct regmap_irq_chip_data *irqdata[CPCAP_NR_IRQ_CHIPS]; + const struct regmap_config *regmap_conf; + struct regmap *regmap; +}; + +static int cpcap_check_revision(struct cpcap_ddata *cpcap) +{ + u16 vendor, rev; + int ret; + + ret = cpcap_get_vendor(&cpcap->spi->dev, cpcap->regmap, &vendor); + if (ret) + return ret; + + ret = cpcap_get_revision(&cpcap->spi->dev, cpcap->regmap, &rev); + if (ret) + return ret; + + dev_info(&cpcap->spi->dev, "CPCAP vendor: %s rev: %i.%i (%x)\n", + vendor == CPCAP_VENDOR_ST ? "ST" : "TI", + CPCAP_REVISION_MAJOR(rev), CPCAP_REVISION_MINOR(rev), + rev); + + if (rev < CPCAP_REVISION_2_1) { + dev_info(&cpcap->spi->dev, + "Please add old CPCAP revision support as needed\n"); + return -ENODEV; + } + + return 0; +} + +/* + * First two irq chips are the two private macro interrupt chips, the third + * irq chip is for register banks 1 - 4 and is available for drivers to use. + */ +static struct regmap_irq_chip cpcap_irq_chip[CPCAP_NR_IRQ_CHIPS] = { + { + .name = "cpcap-m2", + .num_regs = 1, + .status_base = CPCAP_REG_MI1, + .ack_base = CPCAP_REG_MI1, + .mask_base = CPCAP_REG_MIM1, + .use_ack = true, + }, + { + .name = "cpcap-m2", + .num_regs = 1, + .status_base = CPCAP_REG_MI2, + .ack_base = CPCAP_REG_MI2, + .mask_base = CPCAP_REG_MIM2, + .use_ack = true, + }, + { + .name = "cpcap1-4", + .num_regs = 4, + .status_base = CPCAP_REG_INT1, + .ack_base = CPCAP_REG_INT1, + .mask_base = CPCAP_REG_INTM1, + .type_base = CPCAP_REG_INTS1, + .use_ack = true, + }, +}; + +static void cpcap_init_one_regmap_irq(struct cpcap_ddata *cpcap, + struct regmap_irq *rirq, + int irq_base, int irq) +{ + unsigned int reg_offset; + unsigned int bit, mask; + + reg_offset = irq - irq_base; + reg_offset /= cpcap->regmap_conf->val_bits; + reg_offset *= cpcap->regmap_conf->reg_stride; + + bit = irq % cpcap->regmap_conf->val_bits; + mask = (1 << bit); + + rirq->reg_offset = reg_offset; + rirq->mask = mask; +} + +static int cpcap_init_irq_chip(struct cpcap_ddata *cpcap, int irq_chip, + int irq_start, int nr_irqs) +{ + struct regmap_irq_chip *chip = &cpcap_irq_chip[irq_chip]; + int i, ret; + + for (i = irq_start; i < irq_start + nr_irqs; i++) { + struct regmap_irq *rirq = &cpcap->irqs[i]; + + cpcap_init_one_regmap_irq(cpcap, rirq, irq_start, i); + } + chip->irqs = &cpcap->irqs[irq_start]; + chip->num_irqs = nr_irqs; + chip->irq_drv_data = cpcap; + + ret = devm_regmap_add_irq_chip(&cpcap->spi->dev, cpcap->regmap, + cpcap->spi->irq, + IRQF_TRIGGER_RISING | + IRQF_SHARED, -1, + chip, &cpcap->irqdata[irq_chip]); + if (ret) { + dev_err(&cpcap->spi->dev, "could not add irq chip %i: %i\n", + irq_chip, ret); + return ret; + } + + return 0; +} + +static int cpcap_init_irq(struct cpcap_ddata *cpcap) +{ + int ret; + + cpcap->irqs = devm_kzalloc(&cpcap->spi->dev, + sizeof(*cpcap->irqs) * + CPCAP_NR_IRQ_REG_BANKS * + cpcap->regmap_conf->val_bits, + GFP_KERNEL); + if (!cpcap->irqs) + return -ENOMEM; + + ret = cpcap_init_irq_chip(cpcap, 0, 0, 16); + if (ret) + return ret; + + ret = cpcap_init_irq_chip(cpcap, 1, 16, 16); + if (ret) + return ret; + + ret = cpcap_init_irq_chip(cpcap, 2, 32, 64); + if (ret) + return ret; + + enable_irq_wake(cpcap->spi->irq); + + return 0; +} + +static const struct of_device_id cpcap_of_match[] = { + { .compatible = "motorola,cpcap", }, + { .compatible = "st,6556002", }, + {}, +}; +MODULE_DEVICE_TABLE(of, cpcap_of_match); + +static const struct regmap_config cpcap_regmap_config = { + .reg_bits = 16, + .reg_stride = 4, + .pad_bits = 0, + .val_bits = 16, + .write_flag_mask = 0x8000, + .max_register = CPCAP_REG_ST_TEST2, + .cache_type = REGCACHE_NONE, + .reg_format_endian = REGMAP_ENDIAN_LITTLE, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + +static int cpcap_probe(struct spi_device *spi) +{ + const struct of_device_id *match; + struct cpcap_ddata *cpcap; + int ret; + + match = of_match_device(of_match_ptr(cpcap_of_match), &spi->dev); + if (!match) + return -ENODEV; + + cpcap = devm_kzalloc(&spi->dev, sizeof(*cpcap), GFP_KERNEL); + if (!cpcap) + return -ENOMEM; + + cpcap->spi = spi; + spi_set_drvdata(spi, cpcap); + + spi->bits_per_word = 16; + spi->mode = SPI_MODE_0 | SPI_CS_HIGH; + + ret = spi_setup(spi); + if (ret) + return ret; + + cpcap->regmap_conf = &cpcap_regmap_config; + cpcap->regmap = devm_regmap_init_spi(spi, &cpcap_regmap_config); + if (IS_ERR(cpcap->regmap)) { + ret = PTR_ERR(cpcap->regmap); + dev_err(&cpcap->spi->dev, "Failed to initialize regmap: %d\n", + ret); + + return ret; + } + + ret = cpcap_check_revision(cpcap); + if (ret) { + dev_err(&cpcap->spi->dev, "Failed to detect CPCAP: %i\n", ret); + return ret; + } + + ret = cpcap_init_irq(cpcap); + if (ret) + return ret; + + return of_platform_populate(spi->dev.of_node, NULL, NULL, + &cpcap->spi->dev); +} + +static int cpcap_remove(struct spi_device *pdev) +{ + struct cpcap_ddata *cpcap = spi_get_drvdata(pdev); + + of_platform_depopulate(&cpcap->spi->dev); + + return 0; +} + +static struct spi_driver cpcap_driver = { + .driver = { + .name = "cpcap-core", + .of_match_table = cpcap_of_match, + }, + .probe = cpcap_probe, + .remove = cpcap_remove, +}; +module_spi_driver(cpcap_driver); + +MODULE_ALIAS("platform:cpcap"); +MODULE_DESCRIPTION("CPCAP driver"); +MODULE_AUTHOR("Tony Lindgren "); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/motorola-cpcap.h b/include/linux/mfd/motorola-cpcap.h new file mode 100644 index 000000000000..b4031c2b2214 --- /dev/null +++ b/include/linux/mfd/motorola-cpcap.h @@ -0,0 +1,292 @@ +/* + * The register defines are based on earlier cpcap.h in Motorola Linux kernel + * tree. + * + * Copyright (C) 2007-2009 Motorola, Inc. + * + * Rewritten for the real register offsets instead of enumeration + * to make the defines usable with Linux kernel regmap support + * + * Copyright (C) 2016 Tony Lindgren + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define CPCAP_VENDOR_ST 0 +#define CPCAP_VENDOR_TI 1 + +#define CPCAP_REVISION_MAJOR(r) (((r) >> 4) + 1) +#define CPCAP_REVISION_MINOR(r) ((r) & 0xf) + +#define CPCAP_REVISION_1_0 0x08 +#define CPCAP_REVISION_1_1 0x09 +#define CPCAP_REVISION_2_0 0x10 +#define CPCAP_REVISION_2_1 0x11 + +/* CPCAP registers */ +#define CPCAP_REG_INT1 0x0000 /* Interrupt 1 */ +#define CPCAP_REG_INT2 0x0004 /* Interrupt 2 */ +#define CPCAP_REG_INT3 0x0008 /* Interrupt 3 */ +#define CPCAP_REG_INT4 0x000c /* Interrupt 4 */ +#define CPCAP_REG_INTM1 0x0010 /* Interrupt Mask 1 */ +#define CPCAP_REG_INTM2 0x0014 /* Interrupt Mask 2 */ +#define CPCAP_REG_INTM3 0x0018 /* Interrupt Mask 3 */ +#define CPCAP_REG_INTM4 0x001c /* Interrupt Mask 4 */ +#define CPCAP_REG_INTS1 0x0020 /* Interrupt Sense 1 */ +#define CPCAP_REG_INTS2 0x0024 /* Interrupt Sense 2 */ +#define CPCAP_REG_INTS3 0x0028 /* Interrupt Sense 3 */ +#define CPCAP_REG_INTS4 0x002c /* Interrupt Sense 4 */ +#define CPCAP_REG_ASSIGN1 0x0030 /* Resource Assignment 1 */ +#define CPCAP_REG_ASSIGN2 0x0034 /* Resource Assignment 2 */ +#define CPCAP_REG_ASSIGN3 0x0038 /* Resource Assignment 3 */ +#define CPCAP_REG_ASSIGN4 0x003c /* Resource Assignment 4 */ +#define CPCAP_REG_ASSIGN5 0x0040 /* Resource Assignment 5 */ +#define CPCAP_REG_ASSIGN6 0x0044 /* Resource Assignment 6 */ +#define CPCAP_REG_VERSC1 0x0048 /* Version Control 1 */ +#define CPCAP_REG_VERSC2 0x004c /* Version Control 2 */ + +#define CPCAP_REG_MI1 0x0200 /* Macro Interrupt 1 */ +#define CPCAP_REG_MIM1 0x0204 /* Macro Interrupt Mask 1 */ +#define CPCAP_REG_MI2 0x0208 /* Macro Interrupt 2 */ +#define CPCAP_REG_MIM2 0x020c /* Macro Interrupt Mask 2 */ +#define CPCAP_REG_UCC1 0x0210 /* UC Control 1 */ +#define CPCAP_REG_UCC2 0x0214 /* UC Control 2 */ + +#define CPCAP_REG_PC1 0x021c /* Power Cut 1 */ +#define CPCAP_REG_PC2 0x0220 /* Power Cut 2 */ +#define CPCAP_REG_BPEOL 0x0224 /* BP and EOL */ +#define CPCAP_REG_PGC 0x0228 /* Power Gate and Control */ +#define CPCAP_REG_MT1 0x022c /* Memory Transfer 1 */ +#define CPCAP_REG_MT2 0x0230 /* Memory Transfer 2 */ +#define CPCAP_REG_MT3 0x0234 /* Memory Transfer 3 */ +#define CPCAP_REG_PF 0x0238 /* Print Format */ + +#define CPCAP_REG_SCC 0x0400 /* System Clock Control */ +#define CPCAP_REG_SW1 0x0404 /* Stop Watch 1 */ +#define CPCAP_REG_SW2 0x0408 /* Stop Watch 2 */ +#define CPCAP_REG_UCTM 0x040c /* UC Turbo Mode */ +#define CPCAP_REG_TOD1 0x0410 /* Time of Day 1 */ +#define CPCAP_REG_TOD2 0x0414 /* Time of Day 2 */ +#define CPCAP_REG_TODA1 0x0418 /* Time of Day Alarm 1 */ +#define CPCAP_REG_TODA2 0x041c /* Time of Day Alarm 2 */ +#define CPCAP_REG_DAY 0x0420 /* Day */ +#define CPCAP_REG_DAYA 0x0424 /* Day Alarm */ +#define CPCAP_REG_VAL1 0x0428 /* Validity 1 */ +#define CPCAP_REG_VAL2 0x042c /* Validity 2 */ + +#define CPCAP_REG_SDVSPLL 0x0600 /* Switcher DVS and PLL */ +#define CPCAP_REG_SI2CC1 0x0604 /* Switcher I2C Control 1 */ +#define CPCAP_REG_Si2CC2 0x0608 /* Switcher I2C Control 2 */ +#define CPCAP_REG_S1C1 0x060c /* Switcher 1 Control 1 */ +#define CPCAP_REG_S1C2 0x0610 /* Switcher 1 Control 2 */ +#define CPCAP_REG_S2C1 0x0614 /* Switcher 2 Control 1 */ +#define CPCAP_REG_S2C2 0x0618 /* Switcher 2 Control 2 */ +#define CPCAP_REG_S3C 0x061c /* Switcher 3 Control */ +#define CPCAP_REG_S4C1 0x0620 /* Switcher 4 Control 1 */ +#define CPCAP_REG_S4C2 0x0624 /* Switcher 4 Control 2 */ +#define CPCAP_REG_S5C 0x0628 /* Switcher 5 Control */ +#define CPCAP_REG_S6C 0x062c /* Switcher 6 Control */ +#define CPCAP_REG_VCAMC 0x0630 /* VCAM Control */ +#define CPCAP_REG_VCSIC 0x0634 /* VCSI Control */ +#define CPCAP_REG_VDACC 0x0638 /* VDAC Control */ +#define CPCAP_REG_VDIGC 0x063c /* VDIG Control */ +#define CPCAP_REG_VFUSEC 0x0640 /* VFUSE Control */ +#define CPCAP_REG_VHVIOC 0x0644 /* VHVIO Control */ +#define CPCAP_REG_VSDIOC 0x0648 /* VSDIO Control */ +#define CPCAP_REG_VPLLC 0x064c /* VPLL Control */ +#define CPCAP_REG_VRF1C 0x0650 /* VRF1 Control */ +#define CPCAP_REG_VRF2C 0x0654 /* VRF2 Control */ +#define CPCAP_REG_VRFREFC 0x0658 /* VRFREF Control */ +#define CPCAP_REG_VWLAN1C 0x065c /* VWLAN1 Control */ +#define CPCAP_REG_VWLAN2C 0x0660 /* VWLAN2 Control */ +#define CPCAP_REG_VSIMC 0x0664 /* VSIM Control */ +#define CPCAP_REG_VVIBC 0x0668 /* VVIB Control */ +#define CPCAP_REG_VUSBC 0x066c /* VUSB Control */ +#define CPCAP_REG_VUSBINT1C 0x0670 /* VUSBINT1 Control */ +#define CPCAP_REG_VUSBINT2C 0x0674 /* VUSBINT2 Control */ +#define CPCAP_REG_URT 0x0678 /* Useroff Regulator Trigger */ +#define CPCAP_REG_URM1 0x067c /* Useroff Regulator Mask 1 */ +#define CPCAP_REG_URM2 0x0680 /* Useroff Regulator Mask 2 */ + +#define CPCAP_REG_VAUDIOC 0x0800 /* VAUDIO Control */ +#define CPCAP_REG_CC 0x0804 /* Codec Control */ +#define CPCAP_REG_CDI 0x0808 /* Codec Digital Interface */ +#define CPCAP_REG_SDAC 0x080c /* Stereo DAC */ +#define CPCAP_REG_SDACDI 0x0810 /* Stereo DAC Digital Interface */ +#define CPCAP_REG_TXI 0x0814 /* TX Inputs */ +#define CPCAP_REG_TXMP 0x0818 /* TX MIC PGA's */ +#define CPCAP_REG_RXOA 0x081c /* RX Output Amplifiers */ +#define CPCAP_REG_RXVC 0x0820 /* RX Volume Control */ +#define CPCAP_REG_RXCOA 0x0824 /* RX Codec to Output Amps */ +#define CPCAP_REG_RXSDOA 0x0828 /* RX Stereo DAC to Output Amps */ +#define CPCAP_REG_RXEPOA 0x082c /* RX External PGA to Output Amps */ +#define CPCAP_REG_RXLL 0x0830 /* RX Low Latency */ +#define CPCAP_REG_A2LA 0x0834 /* A2 Loudspeaker Amplifier */ +#define CPCAP_REG_MIPIS1 0x0838 /* MIPI Slimbus 1 */ +#define CPCAP_REG_MIPIS2 0x083c /* MIPI Slimbus 2 */ +#define CPCAP_REG_MIPIS3 0x0840 /* MIPI Slimbus 3. */ +#define CPCAP_REG_LVAB 0x0844 /* LMR Volume and A4 Balanced. */ + +#define CPCAP_REG_CCC1 0x0a00 /* Coulomb Counter Control 1 */ +#define CPCAP_REG_CRM 0x0a04 /* Charger and Reverse Mode */ +#define CPCAP_REG_CCCC2 0x0a08 /* Coincell and Coulomb Ctr Ctrl 2 */ +#define CPCAP_REG_CCS1 0x0a0c /* Coulomb Counter Sample 1 */ +#define CPCAP_REG_CCS2 0x0a10 /* Coulomb Counter Sample 2 */ +#define CPCAP_REG_CCA1 0x0a14 /* Coulomb Counter Accumulator 1 */ +#define CPCAP_REG_CCA2 0x0a18 /* Coulomb Counter Accumulator 2 */ +#define CPCAP_REG_CCM 0x0a1c /* Coulomb Counter Mode */ +#define CPCAP_REG_CCO 0x0a20 /* Coulomb Counter Offset */ +#define CPCAP_REG_CCI 0x0a24 /* Coulomb Counter Integrator */ + +#define CPCAP_REG_ADCC1 0x0c00 /* A/D Converter Configuration 1 */ +#define CPCAP_REG_ADCC2 0x0c04 /* A/D Converter Configuration 2 */ +#define CPCAP_REG_ADCD0 0x0c08 /* A/D Converter Data 0 */ +#define CPCAP_REG_ADCD1 0x0c0c /* A/D Converter Data 1 */ +#define CPCAP_REG_ADCD2 0x0c10 /* A/D Converter Data 2 */ +#define CPCAP_REG_ADCD3 0x0c14 /* A/D Converter Data 3 */ +#define CPCAP_REG_ADCD4 0x0c18 /* A/D Converter Data 4 */ +#define CPCAP_REG_ADCD5 0x0c1c /* A/D Converter Data 5 */ +#define CPCAP_REG_ADCD6 0x0c20 /* A/D Converter Data 6 */ +#define CPCAP_REG_ADCD7 0x0c24 /* A/D Converter Data 7 */ +#define CPCAP_REG_ADCAL1 0x0c28 /* A/D Converter Calibration 1 */ +#define CPCAP_REG_ADCAL2 0x0c2c /* A/D Converter Calibration 2 */ + +#define CPCAP_REG_USBC1 0x0e00 /* USB Control 1 */ +#define CPCAP_REG_USBC2 0x0e04 /* USB Control 2 */ +#define CPCAP_REG_USBC3 0x0e08 /* USB Control 3 */ +#define CPCAP_REG_UVIDL 0x0e0c /* ULPI Vendor ID Low */ +#define CPCAP_REG_UVIDH 0x0e10 /* ULPI Vendor ID High */ +#define CPCAP_REG_UPIDL 0x0e14 /* ULPI Product ID Low */ +#define CPCAP_REG_UPIDH 0x0e18 /* ULPI Product ID High */ +#define CPCAP_REG_UFC1 0x0e1c /* ULPI Function Control 1 */ +#define CPCAP_REG_UFC2 0x0e20 /* ULPI Function Control 2 */ +#define CPCAP_REG_UFC3 0x0e24 /* ULPI Function Control 3 */ +#define CPCAP_REG_UIC1 0x0e28 /* ULPI Interface Control 1 */ +#define CPCAP_REG_UIC2 0x0e2c /* ULPI Interface Control 2 */ +#define CPCAP_REG_UIC3 0x0e30 /* ULPI Interface Control 3 */ +#define CPCAP_REG_USBOTG1 0x0e34 /* USB OTG Control 1 */ +#define CPCAP_REG_USBOTG2 0x0e38 /* USB OTG Control 2 */ +#define CPCAP_REG_USBOTG3 0x0e3c /* USB OTG Control 3 */ +#define CPCAP_REG_UIER1 0x0e40 /* USB Interrupt Enable Rising 1 */ +#define CPCAP_REG_UIER2 0x0e44 /* USB Interrupt Enable Rising 2 */ +#define CPCAP_REG_UIER3 0x0e48 /* USB Interrupt Enable Rising 3 */ +#define CPCAP_REG_UIEF1 0x0e4c /* USB Interrupt Enable Falling 1 */ +#define CPCAP_REG_UIEF2 0x0e50 /* USB Interrupt Enable Falling 1 */ +#define CPCAP_REG_UIEF3 0x0e54 /* USB Interrupt Enable Falling 1 */ +#define CPCAP_REG_UIS 0x0e58 /* USB Interrupt Status */ +#define CPCAP_REG_UIL 0x0e5c /* USB Interrupt Latch */ +#define CPCAP_REG_USBD 0x0e60 /* USB Debug */ +#define CPCAP_REG_SCR1 0x0e64 /* Scratch 1 */ +#define CPCAP_REG_SCR2 0x0e68 /* Scratch 2 */ +#define CPCAP_REG_SCR3 0x0e6c /* Scratch 3 */ + +#define CPCAP_REG_VMC 0x0eac /* Video Mux Control */ +#define CPCAP_REG_OWDC 0x0eb0 /* One Wire Device Control */ +#define CPCAP_REG_GPIO0 0x0eb4 /* GPIO 0 Control */ + +#define CPCAP_REG_GPIO1 0x0ebc /* GPIO 1 Control */ + +#define CPCAP_REG_GPIO2 0x0ec4 /* GPIO 2 Control */ + +#define CPCAP_REG_GPIO3 0x0ecc /* GPIO 3 Control */ + +#define CPCAP_REG_GPIO4 0x0ed4 /* GPIO 4 Control */ + +#define CPCAP_REG_GPIO5 0x0edc /* GPIO 5 Control */ + +#define CPCAP_REG_GPIO6 0x0ee4 /* GPIO 6 Control */ + +#define CPCAP_REG_MDLC 0x1000 /* Main Display Lighting Control */ +#define CPCAP_REG_KLC 0x1004 /* Keypad Lighting Control */ +#define CPCAP_REG_ADLC 0x1008 /* Aux Display Lighting Control */ +#define CPCAP_REG_REDC 0x100c /* Red Triode Control */ +#define CPCAP_REG_GREENC 0x1010 /* Green Triode Control */ +#define CPCAP_REG_BLUEC 0x1014 /* Blue Triode Control */ +#define CPCAP_REG_CFC 0x1018 /* Camera Flash Control */ +#define CPCAP_REG_ABC 0x101c /* Adaptive Boost Control */ +#define CPCAP_REG_BLEDC 0x1020 /* Bluetooth LED Control */ +#define CPCAP_REG_CLEDC 0x1024 /* Camera Privacy LED Control */ + +#define CPCAP_REG_OW1C 0x1200 /* One Wire 1 Command */ +#define CPCAP_REG_OW1D 0x1204 /* One Wire 1 Data */ +#define CPCAP_REG_OW1I 0x1208 /* One Wire 1 Interrupt */ +#define CPCAP_REG_OW1IE 0x120c /* One Wire 1 Interrupt Enable */ + +#define CPCAP_REG_OW1 0x1214 /* One Wire 1 Control */ + +#define CPCAP_REG_OW2C 0x1220 /* One Wire 2 Command */ +#define CPCAP_REG_OW2D 0x1224 /* One Wire 2 Data */ +#define CPCAP_REG_OW2I 0x1228 /* One Wire 2 Interrupt */ +#define CPCAP_REG_OW2IE 0x122c /* One Wire 2 Interrupt Enable */ + +#define CPCAP_REG_OW2 0x1234 /* One Wire 2 Control */ + +#define CPCAP_REG_OW3C 0x1240 /* One Wire 3 Command */ +#define CPCAP_REG_OW3D 0x1244 /* One Wire 3 Data */ +#define CPCAP_REG_OW3I 0x1248 /* One Wire 3 Interrupt */ +#define CPCAP_REG_OW3IE 0x124c /* One Wire 3 Interrupt Enable */ + +#define CPCAP_REG_OW3 0x1254 /* One Wire 3 Control */ +#define CPCAP_REG_GCAIC 0x1258 /* GCAI Clock Control */ +#define CPCAP_REG_GCAIM 0x125c /* GCAI GPIO Mode */ +#define CPCAP_REG_LGDIR 0x1260 /* LMR GCAI GPIO Direction */ +#define CPCAP_REG_LGPU 0x1264 /* LMR GCAI GPIO Pull-up */ +#define CPCAP_REG_LGPIN 0x1268 /* LMR GCAI GPIO Pin */ +#define CPCAP_REG_LGMASK 0x126c /* LMR GCAI GPIO Mask */ +#define CPCAP_REG_LDEB 0x1270 /* LMR Debounce Settings */ +#define CPCAP_REG_LGDET 0x1274 /* LMR GCAI Detach Detect */ +#define CPCAP_REG_LMISC 0x1278 /* LMR Misc Bits */ +#define CPCAP_REG_LMACE 0x127c /* LMR Mace IC Support */ + +#define CPCAP_REG_TEST 0x7c00 /* Test */ + +#define CPCAP_REG_ST_TEST1 0x7d08 /* ST Test1 */ + +#define CPCAP_REG_ST_TEST2 0x7d18 /* ST Test2 */ + +/* + * Helpers for child devices to check the revision and vendor. + * + * REVISIT: No documentation for the bits below, please update + * to use proper names for defines when available. + */ + +static inline int cpcap_get_revision(struct device *dev, + struct regmap *regmap, + u16 *revision) +{ + unsigned int val; + int ret; + + ret = regmap_read(regmap, CPCAP_REG_VERSC1, &val); + if (ret) { + dev_err(dev, "Could not read revision\n"); + + return ret; + } + + *revision = ((val >> 3) & 0x7) | ((val << 3) & 0x38); + + return 0; +} + +static inline int cpcap_get_vendor(struct device *dev, + struct regmap *regmap, + u16 *vendor) +{ + unsigned int val; + int ret; + + ret = regmap_read(regmap, CPCAP_REG_VERSC1, &val); + if (ret) { + dev_err(dev, "Could not read vendor\n"); + + return ret; + } + + *vendor = (val >> 6) & 0x7; + + return 0; +} -- cgit v1.2.3