From a9322f6488b432ddc1e89be88242c827c633fb63 Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Wed, 11 Jun 2008 16:35:14 +0200 Subject: x86, pci: introduce pci=noioapicquirk kernel cmdline option Introduce pci=noioapicquirk kernel cmdline option to disable all boot interrupt quirks Signed-off-by: Stefan Assmann Signed-off-by: Olaf Dabrunz Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 795c487af8e4..1aebe9dffbaa 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1518,6 +1518,9 @@ and is between 256 and 4096 characters. It is defined in the file nomsi [MSI] If the PCI_MSI kernel config parameter is enabled, this kernel boot option can be used to disable the use of MSI interrupts system-wide. + noioapicquirk [APIC] Disable all boot interrupt quirks. + Safety option to keep boot IRQs enabled. This + should never be necessary. biosirq [X86-32] Use PCI BIOS calls to get the interrupt routing table. These calls are known to be buggy on several machines and they hang the machine -- cgit v1.2.3 From 9197979b518573999d52d9e85bce1680682ed85c Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Wed, 11 Jun 2008 16:35:15 +0200 Subject: x86, pci: introduce pci=ioapicreroute kernel cmdline option Introduce pci=ioapicreroute kernel cmdline option to enable rerouting of boot interrupts to the primary io-apic. Signed-off-by: Stefan Assmann Signed-off-by: Olaf Dabrunz Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 4 ++++ arch/x86/pci/common.c | 5 +++++ include/asm-x86/io_apic.h | 4 ++++ include/asm-x86/pci.h | 1 + 4 files changed, 14 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1aebe9dffbaa..df262b3c3d6e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1521,6 +1521,10 @@ and is between 256 and 4096 characters. It is defined in the file noioapicquirk [APIC] Disable all boot interrupt quirks. Safety option to keep boot IRQs enabled. This should never be necessary. + ioapicreroute [APIC] Enable rerouting of boot IRQs to the + primary IO-APIC for bridges that cannot disable + boot IRQs. This fixes a source of spurious IRQs + when the system masks IRQs. biosirq [X86-32] Use PCI BIOS calls to get the interrupt routing table. These calls are known to be buggy on several machines and they hang the machine diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index bc6a101ed7ec..0a9eaa736d94 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -23,6 +23,7 @@ unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | static int pci_bf_sort; int pci_routeirq; int noioapicquirk; +int noioapicreroute = 1; int pcibios_last_bus = -1; unsigned long pirq_table_addr; struct pci_bus *pci_root_bus; @@ -499,6 +500,10 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "noioapicquirk")) { noioapicquirk = 1; return NULL; + } else if (!strcmp(str, "ioapicreroute")) { + if (noioapicreroute != -1) + noioapicreroute = 0; + return NULL; } return str; } diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h index 8ca0110819f4..a39670ae17df 100644 --- a/include/asm-x86/io_apic.h +++ b/include/asm-x86/io_apic.h @@ -160,12 +160,16 @@ extern int skip_ioapic_setup; /* 1 if "noapic" boot option passed */ extern int noioapicquirk; +/* -1 if "noapic" boot option passed */ +extern int noioapicreroute; + /* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */ extern int timer_through_8259; static inline void disable_ioapic_setup(void) { noioapicquirk = 1; + noioapicreroute = -1; skip_ioapic_setup = 1; } diff --git a/include/asm-x86/pci.h b/include/asm-x86/pci.h index 30eec93a845e..52a29f7668ef 100644 --- a/include/asm-x86/pci.h +++ b/include/asm-x86/pci.h @@ -20,6 +20,7 @@ struct pci_sysdata { extern int pci_routeirq; extern int noioapicquirk; +extern int ioapicreroute; /* scan a bus after allocating a pci_sysdata for it */ extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, -- cgit v1.2.3 From 41b9eb264c8407655db57b60b4457fe1b2ec9977 Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Tue, 15 Jul 2008 13:48:55 +0200 Subject: x86, pci: introduce config option for pci reroute quirks (was: [PATCH 0/3] Boot IRQ quirks for Broadcom and AMD/ATI) This is against linux-2.6-tip, branch pci-ioapic-boot-irq-quirks. From: Stefan Assmann Subject: Introduce config option for pci reroute quirks The config option X86_REROUTE_FOR_BROKEN_BOOT_IRQS is introduced to enable (or disable) the redirection of the interrupt handler to the boot interrupt line by default. Depending on the existence of interrupt masking / threaded interrupt handling in the kernel (vanilla, rt, ...) and the maturity of the rerouting patch, users can enable or disable the redirection by default. This means that the reroute quirk can be applied to any kernel without changing it. Interrupt sharing could be increased if this option is enabled. However this option is vital for threaded interrupt handling, as done by the RT kernel. It should simplify the consolidation with the RT kernel. The option can be overridden by either pci=ioapicreroute or pci=noioapicreroute. Signed-off-by: Stefan Assmann Signed-off-by: Olaf Dabrunz Cc: Jesse Barnes Cc: Jon Masters Cc: Ihno Krumreich Cc: Sven Dietrich Cc: Daniel Gollub Cc: Felix Foerster Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 4 ++++ arch/x86/Kconfig | 24 ++++++++++++++++++++++++ arch/x86/pci/common.c | 8 ++++++++ drivers/pci/quirks.c | 2 +- include/asm-x86/pci.h | 2 +- 5 files changed, 38 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index f5662b7a34d1..62b6e8067a5b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1536,6 +1536,10 @@ and is between 256 and 4096 characters. It is defined in the file primary IO-APIC for bridges that cannot disable boot IRQs. This fixes a source of spurious IRQs when the system masks IRQs. + noioapicreroute [APIC] Disable workaround that uses the + boot IRQ equivalent of an IRQ that connects to + a chipset where boot IRQs cannot be disabled. + The opposite of ioapicreroute. biosirq [X86-32] Use PCI BIOS calls to get the interrupt routing table. These calls are known to be buggy on several machines and they hang the machine diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 96e0c2ebc388..09521332636b 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -665,6 +665,30 @@ config X86_VISWS_APIC def_bool y depends on X86_32 && X86_VISWS +config X86_REROUTE_FOR_BROKEN_BOOT_IRQS + bool "Reroute for broken boot IRQs" + default n + depends on X86_IO_APIC + help + This option enables a workaround that fixes a source of + spurious interrupts. This is recommended when threaded + interrupt handling is used on systems where the generation of + superfluous "boot interrupts" cannot be disabled. + + Some chipsets generate a legacy INTx "boot IRQ" when the IRQ + entry in the chipset's IO-APIC is masked (as, e.g. the RT + kernel does during interrupt handling). On chipsets where this + boot IRQ generation cannot be disabled, this workaround keeps + the original IRQ line masked so that only the equivalent "boot + IRQ" is delivered to the CPUs. The workaround also tells the + kernel to set up the IRQ handler on the boot IRQ line. In this + way only one interrupt is delivered to the kernel. Otherwise + the spurious second interrupt may cause the kernel to bring + down (vital) interrupt lines. + + Only affects "broken" chipsets. Interrupt sharing may be + increased on these systems. + config X86_MCE bool "Machine Check Exception" depends on !X86_VOYAGER diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 1485a26ddcef..bb1a01f089e2 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -24,7 +24,11 @@ unsigned int pci_early_dump_regs; static int pci_bf_sort; int pci_routeirq; int noioapicquirk; +#ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS +int noioapicreroute = 0; +#else int noioapicreroute = 1; +#endif int pcibios_last_bus = -1; unsigned long pirq_table_addr; struct pci_bus *pci_root_bus; @@ -528,6 +532,10 @@ char * __devinit pcibios_setup(char *str) if (noioapicreroute != -1) noioapicreroute = 0; return NULL; + } else if (!strcmp(str, "noioapicreroute")) { + if (noioapicreroute != -1) + noioapicreroute = 1; + return NULL; } return str; } diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 0911b0c60b64..c880dd0bbfb5 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1397,7 +1397,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); */ static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) { - if (noioapicquirk) + if (noioapicquirk || noioapicreroute) return; dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; diff --git a/include/asm-x86/pci.h b/include/asm-x86/pci.h index 52a29f7668ef..9584d6d5eb93 100644 --- a/include/asm-x86/pci.h +++ b/include/asm-x86/pci.h @@ -20,7 +20,7 @@ struct pci_sysdata { extern int pci_routeirq; extern int noioapicquirk; -extern int ioapicreroute; +extern int noioapicreroute; /* scan a bus after allocating a pci_sysdata for it */ extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, -- cgit v1.2.3 From cdad72207d164569cb4bf647eb824a7f93e8d388 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 3 Sep 2008 16:00:57 +0200 Subject: lockstat: documentation update Christoph noted that the documentation doesn't tell in what unit the lockstat times are reported, ammend this. Reported-by: Christoph Hellwig Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- Documentation/lockstat.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/lockstat.txt b/Documentation/lockstat.txt index 4ba4664ce5c3..02f36f5c64fe 100644 --- a/Documentation/lockstat.txt +++ b/Documentation/lockstat.txt @@ -100,6 +100,7 @@ The first lock (05-10) is a read/write lock, and shows two lines above the short separator. The contention points don't match the column descriptors, they have two: contentions and [] symbol. +The integer part of the time values is in us. View the top contending locks: -- cgit v1.2.3 From c7e78cff6b7518212247fb20b1dc6411540dc9af Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 16 Oct 2008 23:17:09 +0200 Subject: lockstat: contend with points We currently only provide points that have to wait on contention, also lists the points we have to wait for. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- Documentation/lockstat.txt | 50 +++++++++++++++++++++++++++++----------------- include/linux/lockdep.h | 13 ++++++++---- kernel/lockdep.c | 33 +++++++++++++++++++----------- kernel/lockdep_proc.c | 21 +++++++++++++++++-- kernel/mutex.c | 2 +- 5 files changed, 82 insertions(+), 37 deletions(-) (limited to 'Documentation') diff --git a/Documentation/lockstat.txt b/Documentation/lockstat.txt index 02f36f5c64fe..9cb9138f7a79 100644 --- a/Documentation/lockstat.txt +++ b/Documentation/lockstat.txt @@ -71,34 +71,48 @@ Look at the current lock statistics: # less /proc/lock_stat -01 lock_stat version 0.2 +01 lock_stat version 0.3 02 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 03 class name con-bounces contentions waittime-min waittime-max waittime-total acq-bounces acquisitions holdtime-min holdtime-max holdtime-total 04 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 -06 &inode->i_data.tree_lock-W: 15 21657 0.18 1093295.30 11547131054.85 58 10415 0.16 87.51 6387.60 -07 &inode->i_data.tree_lock-R: 0 0 0.00 0.00 0.00 23302 231198 0.25 8.45 98023.38 -08 -------------------------- -09 &inode->i_data.tree_lock 0 [] add_to_page_cache+0x5f/0x190 -10 -11 ............................................................................................................................................................................................... -12 -13 dcache_lock: 1037 1161 0.38 45.32 774.51 6611 243371 0.15 306.48 77387.24 -14 ----------- -15 dcache_lock 180 [] sys_getcwd+0x11e/0x230 -16 dcache_lock 165 [] d_alloc+0x15a/0x210 -17 dcache_lock 33 [] _atomic_dec_and_lock+0x4d/0x70 -18 dcache_lock 1 [] shrink_dcache_parent+0x18/0x130 +06 &mm->mmap_sem-W: 233 538 18446744073708 22924.27 607243.51 1342 45806 1.71 8595.89 1180582.34 +07 &mm->mmap_sem-R: 205 587 18446744073708 28403.36 731975.00 1940 412426 0.58 187825.45 6307502.88 +08 --------------- +09 &mm->mmap_sem 487 [] do_page_fault+0x466/0x928 +10 &mm->mmap_sem 179 [] sys_mprotect+0xcd/0x21d +11 &mm->mmap_sem 279 [] sys_mmap+0x75/0xce +12 &mm->mmap_sem 76 [] sys_munmap+0x32/0x59 +13 --------------- +14 &mm->mmap_sem 270 [] sys_mmap+0x75/0xce +15 &mm->mmap_sem 431 [] do_page_fault+0x466/0x928 +16 &mm->mmap_sem 138 [] sys_munmap+0x32/0x59 +17 &mm->mmap_sem 145 [] sys_mprotect+0xcd/0x21d +18 +19 ............................................................................................................................................................................................... +20 +21 dcache_lock: 621 623 0.52 118.26 1053.02 6745 91930 0.29 316.29 118423.41 +22 ----------- +23 dcache_lock 179 [] _atomic_dec_and_lock+0x34/0x54 +24 dcache_lock 113 [] d_alloc+0x19a/0x1eb +25 dcache_lock 99 [] d_rehash+0x1b/0x44 +26 dcache_lock 104 [] d_instantiate+0x36/0x8a +27 ----------- +28 dcache_lock 192 [] _atomic_dec_and_lock+0x34/0x54 +29 dcache_lock 98 [] d_rehash+0x1b/0x44 +30 dcache_lock 72 [] d_alloc+0x19a/0x1eb +31 dcache_lock 112 [] d_instantiate+0x36/0x8a This excerpt shows the first two lock class statistics. Line 01 shows the output version - each time the format changes this will be updated. Line 02-04 -show the header with column descriptions. Lines 05-10 and 13-18 show the actual +show the header with column descriptions. Lines 05-18 and 20-31 show the actual statistics. These statistics come in two parts; the actual stats separated by a -short separator (line 08, 14) from the contention points. +short separator (line 08, 13) from the contention points. -The first lock (05-10) is a read/write lock, and shows two lines above the +The first lock (05-18) is a read/write lock, and shows two lines above the short separator. The contention points don't match the column descriptors, -they have two: contentions and [] symbol. +they have two: contentions and [] symbol. The second set of contention +points are the points we're contending with. The integer part of the time values is in us. diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index 0aa657aa8a1e..fc9f8e88123b 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -73,6 +73,8 @@ struct lock_class_key { struct lockdep_subclass_key subkeys[MAX_LOCKDEP_SUBCLASSES]; }; +#define LOCKSTAT_POINTS 4 + /* * The lock-class itself: */ @@ -119,7 +121,8 @@ struct lock_class { int name_version; #ifdef CONFIG_LOCK_STAT - unsigned long contention_point[4]; + unsigned long contention_point[LOCKSTAT_POINTS]; + unsigned long contending_point[LOCKSTAT_POINTS]; #endif }; @@ -144,6 +147,7 @@ enum bounce_type { struct lock_class_stats { unsigned long contention_point[4]; + unsigned long contending_point[4]; struct lock_time read_waittime; struct lock_time write_waittime; struct lock_time read_holdtime; @@ -165,6 +169,7 @@ struct lockdep_map { const char *name; #ifdef CONFIG_LOCK_STAT int cpu; + unsigned long ip; #endif }; @@ -355,7 +360,7 @@ struct lock_class_key { }; #ifdef CONFIG_LOCK_STAT extern void lock_contended(struct lockdep_map *lock, unsigned long ip); -extern void lock_acquired(struct lockdep_map *lock); +extern void lock_acquired(struct lockdep_map *lock, unsigned long ip); #define LOCK_CONTENDED(_lock, try, lock) \ do { \ @@ -363,13 +368,13 @@ do { \ lock_contended(&(_lock)->dep_map, _RET_IP_); \ lock(_lock); \ } \ - lock_acquired(&(_lock)->dep_map); \ + lock_acquired(&(_lock)->dep_map, _RET_IP_); \ } while (0) #else /* CONFIG_LOCK_STAT */ #define lock_contended(lockdep_map, ip) do {} while (0) -#define lock_acquired(lockdep_map) do {} while (0) +#define lock_acquired(lockdep_map, ip) do {} while (0) #define LOCK_CONTENDED(_lock, try, lock) \ lock(_lock) diff --git a/kernel/lockdep.c b/kernel/lockdep.c index dbda475b13bd..234a9dccb4be 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -136,16 +136,16 @@ static inline struct lock_class *hlock_class(struct held_lock *hlock) #ifdef CONFIG_LOCK_STAT static DEFINE_PER_CPU(struct lock_class_stats[MAX_LOCKDEP_KEYS], lock_stats); -static int lock_contention_point(struct lock_class *class, unsigned long ip) +static int lock_point(unsigned long points[], unsigned long ip) { int i; - for (i = 0; i < ARRAY_SIZE(class->contention_point); i++) { - if (class->contention_point[i] == 0) { - class->contention_point[i] = ip; + for (i = 0; i < LOCKSTAT_POINTS; i++) { + if (points[i] == 0) { + points[i] = ip; break; } - if (class->contention_point[i] == ip) + if (points[i] == ip) break; } @@ -185,6 +185,9 @@ struct lock_class_stats lock_stats(struct lock_class *class) for (i = 0; i < ARRAY_SIZE(stats.contention_point); i++) stats.contention_point[i] += pcs->contention_point[i]; + for (i = 0; i < ARRAY_SIZE(stats.contending_point); i++) + stats.contending_point[i] += pcs->contending_point[i]; + lock_time_add(&pcs->read_waittime, &stats.read_waittime); lock_time_add(&pcs->write_waittime, &stats.write_waittime); @@ -209,6 +212,7 @@ void clear_lock_stats(struct lock_class *class) memset(cpu_stats, 0, sizeof(struct lock_class_stats)); } memset(class->contention_point, 0, sizeof(class->contention_point)); + memset(class->contending_point, 0, sizeof(class->contending_point)); } static struct lock_class_stats *get_lock_stats(struct lock_class *class) @@ -3001,7 +3005,7 @@ __lock_contended(struct lockdep_map *lock, unsigned long ip) struct held_lock *hlock, *prev_hlock; struct lock_class_stats *stats; unsigned int depth; - int i, point; + int i, contention_point, contending_point; depth = curr->lockdep_depth; if (DEBUG_LOCKS_WARN_ON(!depth)) @@ -3025,18 +3029,22 @@ __lock_contended(struct lockdep_map *lock, unsigned long ip) found_it: hlock->waittime_stamp = sched_clock(); - point = lock_contention_point(hlock_class(hlock), ip); + contention_point = lock_point(hlock_class(hlock)->contention_point, ip); + contending_point = lock_point(hlock_class(hlock)->contending_point, + lock->ip); stats = get_lock_stats(hlock_class(hlock)); - if (point < ARRAY_SIZE(stats->contention_point)) - stats->contention_point[point]++; + if (contention_point < LOCKSTAT_POINTS) + stats->contention_point[contention_point]++; + if (contending_point < LOCKSTAT_POINTS) + stats->contending_point[contending_point]++; if (lock->cpu != smp_processor_id()) stats->bounces[bounce_contended + !!hlock->read]++; put_lock_stats(stats); } static void -__lock_acquired(struct lockdep_map *lock) +__lock_acquired(struct lockdep_map *lock, unsigned long ip) { struct task_struct *curr = current; struct held_lock *hlock, *prev_hlock; @@ -3085,6 +3093,7 @@ found_it: put_lock_stats(stats); lock->cpu = cpu; + lock->ip = ip; } void lock_contended(struct lockdep_map *lock, unsigned long ip) @@ -3106,7 +3115,7 @@ void lock_contended(struct lockdep_map *lock, unsigned long ip) } EXPORT_SYMBOL_GPL(lock_contended); -void lock_acquired(struct lockdep_map *lock) +void lock_acquired(struct lockdep_map *lock, unsigned long ip) { unsigned long flags; @@ -3119,7 +3128,7 @@ void lock_acquired(struct lockdep_map *lock) raw_local_irq_save(flags); check_flags(flags); current->lockdep_recursion = 1; - __lock_acquired(lock); + __lock_acquired(lock, ip); current->lockdep_recursion = 0; raw_local_irq_restore(flags); } diff --git a/kernel/lockdep_proc.c b/kernel/lockdep_proc.c index 8d3a6eba8d5a..13716b813896 100644 --- a/kernel/lockdep_proc.c +++ b/kernel/lockdep_proc.c @@ -557,7 +557,7 @@ static void seq_stats(struct seq_file *m, struct lock_stat_data *data) if (stats->read_holdtime.nr) namelen += 2; - for (i = 0; i < ARRAY_SIZE(class->contention_point); i++) { + for (i = 0; i < LOCKSTAT_POINTS; i++) { char sym[KSYM_SYMBOL_LEN]; char ip[32]; @@ -574,6 +574,23 @@ static void seq_stats(struct seq_file *m, struct lock_stat_data *data) stats->contention_point[i], ip, sym); } + for (i = 0; i < LOCKSTAT_POINTS; i++) { + char sym[KSYM_SYMBOL_LEN]; + char ip[32]; + + if (class->contending_point[i] == 0) + break; + + if (!i) + seq_line(m, '-', 40-namelen, namelen); + + sprint_symbol(sym, class->contending_point[i]); + snprintf(ip, sizeof(ip), "[<%p>]", + (void *)class->contending_point[i]); + seq_printf(m, "%40s %14lu %29s %s\n", name, + stats->contending_point[i], + ip, sym); + } if (i) { seq_puts(m, "\n"); seq_line(m, '.', 0, 40 + 1 + 10 * (14 + 1)); @@ -583,7 +600,7 @@ static void seq_stats(struct seq_file *m, struct lock_stat_data *data) static void seq_header(struct seq_file *m) { - seq_printf(m, "lock_stat version 0.2\n"); + seq_printf(m, "lock_stat version 0.3\n"); seq_line(m, '-', 0, 40 + 1 + 10 * (14 + 1)); seq_printf(m, "%40s %14s %14s %14s %14s %14s %14s %14s %14s " "%14s %14s\n", diff --git a/kernel/mutex.c b/kernel/mutex.c index 12c779dc65d4..39a3816b68d9 100644 --- a/kernel/mutex.c +++ b/kernel/mutex.c @@ -184,7 +184,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass, } done: - lock_acquired(&lock->dep_map); + lock_acquired(&lock->dep_map, ip); /* got the lock - rejoice! */ mutex_remove_waiter(lock, &waiter, task_thread_info(task)); debug_mutex_set_owner(lock, task_thread_info(task)); -- cgit v1.2.3 From 1080d709fb9d8cd4392f93476ee46a9d6ea05a5b Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Mon, 27 Oct 2008 12:28:25 -0700 Subject: net: implement emergency route cache rebulds when gc_elasticity is exceeded This is a patch to provide on demand route cache rebuilding. Currently, our route cache is rebulid periodically regardless of need. This introduced unneeded periodic latency. This patch offers a better approach. Using code provided by Eric Dumazet, we compute the standard deviation of the average hash bucket chain length while running rt_check_expire. Should any given chain length grow to larger that average plus 4 standard deviations, we trigger an emergency hash table rebuild for that net namespace. This allows for the common case in which chains are well behaved and do not grow unevenly to not incur any latency at all, while those systems (which may be being maliciously attacked), only rebuild when the attack is detected. This patch take 2 other factors into account: 1) chains with multiple entries that differ by attributes that do not affect the hash value are only counted once, so as not to unduly bias system to rebuilding if features like QOS are heavily used 2) if rebuilding crosses a certain threshold (which is adjustable via the added sysctl in this patch), route caching is disabled entirely for that net namespace, since constant rebuilding is less efficient that no caching at all Tested successfully by me. Signed-off-by: Neil Horman Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 6 ++ include/net/netns/ipv4.h | 2 + net/ipv4/route.c | 132 ++++++++++++++++++++++++++++++++- net/ipv4/sysctl_net_ipv4.c | 12 +++ 4 files changed, 150 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index d84932650fd3..c7712787933c 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -27,6 +27,12 @@ min_adv_mss - INTEGER The advertised MSS depends on the first hop route MTU, but will never be lower than this setting. +rt_cache_rebuild_count - INTEGER + The per net-namespace route cache emergency rebuild threshold. + Any net-namespace having its route cache rebuilt due to + a hash bucket chain being too long more than this many times + will have its route caching disabled + IP Fragmentation: ipfrag_high_thresh - INTEGER diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h index ece1c926b5d1..977f482d97a9 100644 --- a/include/net/netns/ipv4.h +++ b/include/net/netns/ipv4.h @@ -49,6 +49,8 @@ struct netns_ipv4 { int sysctl_icmp_ratelimit; int sysctl_icmp_ratemask; int sysctl_icmp_errors_use_inbound_ifaddr; + int sysctl_rt_cache_rebuild_count; + int current_rt_cache_rebuild_count; struct timer_list rt_secret_timer; atomic_t rt_genid; diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 2ea6dcc3e2cc..21ce7e1b2284 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -129,6 +129,7 @@ static int ip_rt_mtu_expires __read_mostly = 10 * 60 * HZ; static int ip_rt_min_pmtu __read_mostly = 512 + 20 + 20; static int ip_rt_min_advmss __read_mostly = 256; static int ip_rt_secret_interval __read_mostly = 10 * 60 * HZ; +static int rt_chain_length_max __read_mostly = 20; static void rt_worker_func(struct work_struct *work); static DECLARE_DELAYED_WORK(expires_work, rt_worker_func); @@ -145,6 +146,7 @@ static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst); static void ipv4_link_failure(struct sk_buff *skb); static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu); static int rt_garbage_collect(struct dst_ops *ops); +static void rt_emergency_hash_rebuild(struct net *net); static struct dst_ops ipv4_dst_ops = { @@ -201,6 +203,7 @@ const __u8 ip_tos2prio[16] = { struct rt_hash_bucket { struct rtable *chain; }; + #if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK) || \ defined(CONFIG_PROVE_LOCKING) /* @@ -674,6 +677,20 @@ static inline u32 rt_score(struct rtable *rt) return score; } +static inline bool rt_caching(const struct net *net) +{ + return net->ipv4.current_rt_cache_rebuild_count <= + net->ipv4.sysctl_rt_cache_rebuild_count; +} + +static inline bool compare_hash_inputs(const struct flowi *fl1, + const struct flowi *fl2) +{ + return (__force u32)(((fl1->nl_u.ip4_u.daddr ^ fl2->nl_u.ip4_u.daddr) | + (fl1->nl_u.ip4_u.saddr ^ fl2->nl_u.ip4_u.saddr) | + (fl1->iif ^ fl2->iif)) == 0); +} + static inline int compare_keys(struct flowi *fl1, struct flowi *fl2) { return ((__force u32)((fl1->nl_u.ip4_u.daddr ^ fl2->nl_u.ip4_u.daddr) | @@ -753,11 +770,24 @@ static void rt_do_flush(int process_context) } } +/* + * While freeing expired entries, we compute average chain length + * and standard deviation, using fixed-point arithmetic. + * This to have an estimation of rt_chain_length_max + * rt_chain_length_max = max(elasticity, AVG + 4*SD) + * We use 3 bits for frational part, and 29 (or 61) for magnitude. + */ + +#define FRACT_BITS 3 +#define ONE (1UL << FRACT_BITS) + static void rt_check_expire(void) { static unsigned int rover; unsigned int i = rover, goal; struct rtable *rth, **rthp; + unsigned long length = 0, samples = 0; + unsigned long sum = 0, sum2 = 0; u64 mult; mult = ((u64)ip_rt_gc_interval) << rt_hash_log; @@ -766,6 +796,7 @@ static void rt_check_expire(void) goal = (unsigned int)mult; if (goal > rt_hash_mask) goal = rt_hash_mask + 1; + length = 0; for (; goal > 0; goal--) { unsigned long tmo = ip_rt_gc_timeout; @@ -775,6 +806,8 @@ static void rt_check_expire(void) if (need_resched()) cond_resched(); + samples++; + if (*rthp == NULL) continue; spin_lock_bh(rt_hash_lock_addr(i)); @@ -789,11 +822,29 @@ static void rt_check_expire(void) if (time_before_eq(jiffies, rth->u.dst.expires)) { tmo >>= 1; rthp = &rth->u.dst.rt_next; + /* + * Only bump our length if the hash + * inputs on entries n and n+1 are not + * the same, we only count entries on + * a chain with equal hash inputs once + * so that entries for different QOS + * levels, and other non-hash input + * attributes don't unfairly skew + * the length computation + */ + if ((*rthp == NULL) || + !compare_hash_inputs(&(*rthp)->fl, + &rth->fl)) + length += ONE; continue; } } else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout)) { tmo >>= 1; rthp = &rth->u.dst.rt_next; + if ((*rthp == NULL) || + !compare_hash_inputs(&(*rthp)->fl, + &rth->fl)) + length += ONE; continue; } @@ -802,6 +853,15 @@ static void rt_check_expire(void) rt_free(rth); } spin_unlock_bh(rt_hash_lock_addr(i)); + sum += length; + sum2 += length*length; + } + if (samples) { + unsigned long avg = sum / samples; + unsigned long sd = int_sqrt(sum2 / samples - avg*avg); + rt_chain_length_max = max_t(unsigned long, + ip_rt_gc_elasticity, + (avg + 4*sd) >> FRACT_BITS); } rover = i; } @@ -851,6 +911,26 @@ static void rt_secret_rebuild(unsigned long __net) mod_timer(&net->ipv4.rt_secret_timer, jiffies + ip_rt_secret_interval); } +static void rt_secret_rebuild_oneshot(struct net *net) +{ + del_timer_sync(&net->ipv4.rt_secret_timer); + rt_cache_invalidate(net); + if (ip_rt_secret_interval) { + net->ipv4.rt_secret_timer.expires += ip_rt_secret_interval; + add_timer(&net->ipv4.rt_secret_timer); + } +} + +static void rt_emergency_hash_rebuild(struct net *net) +{ + if (net_ratelimit()) { + printk(KERN_WARNING "Route hash chain too long!\n"); + printk(KERN_WARNING "Adjust your secret_interval!\n"); + } + + rt_secret_rebuild_oneshot(net); +} + /* Short description of GC goals. @@ -989,6 +1069,7 @@ out: return 0; static int rt_intern_hash(unsigned hash, struct rtable *rt, struct rtable **rp) { struct rtable *rth, **rthp; + struct rtable *rthi; unsigned long now; struct rtable *cand, **candp; u32 min_score; @@ -1002,7 +1083,13 @@ restart: candp = NULL; now = jiffies; + if (!rt_caching(dev_net(rt->u.dst.dev))) { + rt_drop(rt); + return 0; + } + rthp = &rt_hash_table[hash].chain; + rthi = NULL; spin_lock_bh(rt_hash_lock_addr(hash)); while ((rth = *rthp) != NULL) { @@ -1048,6 +1135,17 @@ restart: chain_length++; rthp = &rth->u.dst.rt_next; + + /* + * check to see if the next entry in the chain + * contains the same hash input values as rt. If it does + * This is where we will insert into the list, instead of + * at the head. This groups entries that differ by aspects not + * relvant to the hash function together, which we use to adjust + * our chain length + */ + if (*rthp && compare_hash_inputs(&(*rthp)->fl, &rt->fl)) + rthi = rth; } if (cand) { @@ -1061,6 +1159,16 @@ restart: *candp = cand->u.dst.rt_next; rt_free(cand); } + } else { + if (chain_length > rt_chain_length_max) { + struct net *net = dev_net(rt->u.dst.dev); + int num = ++net->ipv4.current_rt_cache_rebuild_count; + if (!rt_caching(dev_net(rt->u.dst.dev))) { + printk(KERN_WARNING "%s: %d rebuilds is over limit, route caching disabled\n", + rt->u.dst.dev->name, num); + } + rt_emergency_hash_rebuild(dev_net(rt->u.dst.dev)); + } } /* Try to bind route to arp only if it is output @@ -1098,7 +1206,11 @@ restart: } } - rt->u.dst.rt_next = rt_hash_table[hash].chain; + if (rthi) + rt->u.dst.rt_next = rthi->u.dst.rt_next; + else + rt->u.dst.rt_next = rt_hash_table[hash].chain; + #if RT_CACHE_DEBUG >= 2 if (rt->u.dst.rt_next) { struct rtable *trt; @@ -1114,7 +1226,11 @@ restart: * previous writes to rt are comitted to memory * before making rt visible to other CPUS. */ - rcu_assign_pointer(rt_hash_table[hash].chain, rt); + if (rthi) + rcu_assign_pointer(rthi->u.dst.rt_next, rt); + else + rcu_assign_pointer(rt_hash_table[hash].chain, rt); + spin_unlock_bh(rt_hash_lock_addr(hash)); *rp = rt; return 0; @@ -1217,6 +1333,9 @@ void ip_rt_redirect(__be32 old_gw, __be32 daddr, __be32 new_gw, || ipv4_is_zeronet(new_gw)) goto reject_redirect; + if (!rt_caching(net)) + goto reject_redirect; + if (!IN_DEV_SHARED_MEDIA(in_dev)) { if (!inet_addr_onlink(in_dev, new_gw, old_gw)) goto reject_redirect; @@ -2130,6 +2249,10 @@ int ip_route_input(struct sk_buff *skb, __be32 daddr, __be32 saddr, struct net *net; net = dev_net(dev); + + if (!rt_caching(net)) + goto skip_cache; + tos &= IPTOS_RT_MASK; hash = rt_hash(daddr, saddr, iif, rt_genid(net)); @@ -2154,6 +2277,7 @@ int ip_route_input(struct sk_buff *skb, __be32 daddr, __be32 saddr, } rcu_read_unlock(); +skip_cache: /* Multicast recognition logic is moved from route cache to here. The problem was that too many Ethernet cards have broken/missing hardware multicast filters :-( As result the host on multicasting @@ -2539,6 +2663,9 @@ int __ip_route_output_key(struct net *net, struct rtable **rp, unsigned hash; struct rtable *rth; + if (!rt_caching(net)) + goto slow_output; + hash = rt_hash(flp->fl4_dst, flp->fl4_src, flp->oif, rt_genid(net)); rcu_read_lock_bh(); @@ -2563,6 +2690,7 @@ int __ip_route_output_key(struct net *net, struct rtable **rp, } rcu_read_unlock_bh(); +slow_output: return ip_route_output_slow(net, rp, flp); } diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index 1bb10df8ce7d..0cc8d31f9ac0 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -795,6 +795,14 @@ static struct ctl_table ipv4_net_table[] = { .mode = 0644, .proc_handler = &proc_dointvec }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "rt_cache_rebuild_count", + .data = &init_net.ipv4.sysctl_rt_cache_rebuild_count, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, { } }; @@ -827,8 +835,12 @@ static __net_init int ipv4_sysctl_init_net(struct net *net) &net->ipv4.sysctl_icmp_ratelimit; table[5].data = &net->ipv4.sysctl_icmp_ratemask; + table[6].data = + &net->ipv4.sysctl_rt_cache_rebuild_count; } + net->ipv4.sysctl_rt_cache_rebuild_count = 4; + net->ipv4.ipv4_hdr = register_net_sysctl_table(net, net_ipv4_ctl_path, table); if (net->ipv4.ipv4_hdr == NULL) -- cgit v1.2.3 From f3f0d7b026ae34d6ed5ae67cd4dd5909f9cd70a5 Mon Sep 17 00:00:00 2001 From: Tim Shimmin Date: Thu, 30 Oct 2008 18:30:09 +1100 Subject: [XFS] remove restricted chown parameter from xfs linux On Linux all filesystems are supposed to be operating under Posix' restricted chown. Restricted chown means it restricts chown to the owner unless you have CAP_FOWNER. NOTE: that 2 files outside of fs/xfs have been modified too for this change. Reviewed-by: Dave Chinner SGI-PV: 988919 SGI-Modid: 2.6.x-xfs-melb:linux:32413b Signed-off-by: Tim Shimmin Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- Documentation/filesystems/xfs.txt | 4 ---- kernel/sysctl_check.c | 1 - 2 files changed, 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt index 0a1668ba2600..9878f50d6ed6 100644 --- a/Documentation/filesystems/xfs.txt +++ b/Documentation/filesystems/xfs.txt @@ -229,10 +229,6 @@ The following sysctls are available for the XFS filesystem: ISGID bit is cleared if the irix_sgid_inherit compatibility sysctl is set. - fs.xfs.restrict_chown (Min: 0 Default: 1 Max: 1) - Controls whether unprivileged users can use chown to "give away" - a file to another user. - fs.xfs.inherit_sync (Min: 0 Default: 1 Max: 1) Setting this to "1" will cause the "sync" flag set by the xfs_io(8) chattr command on a directory to be diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c index c35da23ab8fb..fafeb48f27c0 100644 --- a/kernel/sysctl_check.c +++ b/kernel/sysctl_check.c @@ -730,7 +730,6 @@ static const struct trans_ctl_table trans_fs_quota_table[] = { }; static const struct trans_ctl_table trans_fs_xfs_table[] = { - { XFS_RESTRICT_CHOWN, "restrict_chown" }, { XFS_SGID_INHERIT, "irix_sgid_inherit" }, { XFS_SYMLINK_MODE, "irix_symlink_mode" }, { XFS_PANIC_MASK, "panic_mask" }, -- cgit v1.2.3 From 8a1c8eb75be492e20003966652c9cd5ff57a559d Mon Sep 17 00:00:00 2001 From: Aristeu Rozanski Date: Thu, 30 Oct 2008 13:08:50 -0400 Subject: x86, nmi-watchdog: update procfs nmi_watchdog file documentation v2 Impact: improve documentation This patch updates the /proc/sys/kernel/nmi_watchdog documentation. Updated: included Randy Dunlap's corrections. Signed-off-by: Aristeu Rozanski Acked-by: Randy Dunlap Signed-off-by: Ingo Molnar --- Documentation/filesystems/proc.txt | 9 ++++++--- Documentation/nmi_watchdog.txt | 5 +++++ 2 files changed, 11 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index bcceb99b81dd..86be879ed70e 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1338,10 +1338,13 @@ nmi_watchdog Enables/Disables the NMI watchdog on x86 systems. When the value is non-zero the NMI watchdog is enabled and will continuously test all online cpus to -determine whether or not they are still functioning properly. +determine whether or not they are still functioning properly. Currently, +passing "nmi_watchdog=" parameter at boot time is required for this function +to work. -Because the NMI watchdog shares registers with oprofile, by disabling the NMI -watchdog, oprofile may have more registers to utilize. +If LAPIC NMI watchdog method is in use (nmi_watchdog=2 kernel parameter), the +NMI watchdog shares registers with oprofile. By disabling the NMI watchdog, +oprofile may have more registers to utilize. msgmni ------ diff --git a/Documentation/nmi_watchdog.txt b/Documentation/nmi_watchdog.txt index 90aa4531cb67..bf9f80a98282 100644 --- a/Documentation/nmi_watchdog.txt +++ b/Documentation/nmi_watchdog.txt @@ -69,6 +69,11 @@ to the overall system performance. On x86 nmi_watchdog is disabled by default so you have to enable it with a boot time parameter. +It's possible to disable the NMI watchdog in run-time by writing "0" to +/proc/sys/kernel/nmi_watchdog. Writing "1" to the same file will re-enable +the NMI watchdog. Notice that you still need to use "nmi_watchdog=" parameter +at boot time. + NOTE: In kernels prior to 2.4.2-ac18 the NMI-oopser is enabled unconditionally on x86 SMP boxes. -- cgit v1.2.3 From 6b1abbaefa31b84cc02bf4006ba8a63393de1136 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 29 Oct 2008 14:22:15 -0700 Subject: The overdue eepro100 removal. Signed-off-by: Adrian Bunk Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- Documentation/feature-removal-schedule.txt | 7 - MAINTAINERS | 5 - drivers/net/Kconfig | 13 - drivers/net/Makefile | 1 - drivers/net/eepro100.c | 2400 ---------------------------- 5 files changed, 2426 deletions(-) delete mode 100644 drivers/net/eepro100.c (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 05d71b4b9430..6ecd4f0a24f0 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -144,13 +144,6 @@ Who: Christoph Hellwig --------------------------- -What: eepro100 network driver -When: January 2007 -Why: replaced by the e100 driver -Who: Adrian Bunk - ---------------------------- - What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports (temporary transition config option provided until then) The transition config option will also be removed at the same time. diff --git a/MAINTAINERS b/MAINTAINERS index 16202c8ac68f..74e69ab8c132 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1599,11 +1599,6 @@ L: acpi4asus-user@lists.sourceforge.net W: http://sourceforge.net/projects/acpi4asus S: Maintained -EEPRO100 NETWORK DRIVER -P: Andrey V. Savochkin -M: saw@saw.sw.com.sg -S: Maintained - EFS FILESYSTEM W: http://aeschi.ch.eu.org/efs/ S: Orphan diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f749b40f954e..0f3e6b2d2808 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1414,19 +1414,6 @@ config TC35815 depends on NET_PCI && PCI && MIPS select PHYLIB -config EEPRO100 - tristate "EtherExpressPro/100 support (eepro100, original Becker driver)" - depends on NET_PCI && PCI - select MII - help - If you have an Intel EtherExpress PRO/100 PCI network (Ethernet) - card, say Y and read the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called eepro100. - - config E100 tristate "Intel(R) PRO/100+ support" depends on NET_PCI && PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index f19acf8b9220..657c47b1a6b6 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -53,7 +53,6 @@ obj-$(CONFIG_VORTEX) += 3c59x.o obj-$(CONFIG_TYPHOON) += typhoon.o obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o obj-$(CONFIG_PCNET32) += pcnet32.o -obj-$(CONFIG_EEPRO100) += eepro100.o obj-$(CONFIG_E100) += e100.o obj-$(CONFIG_TLAN) += tlan.o obj-$(CONFIG_EPIC100) += epic100.o diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c deleted file mode 100644 index 81e84843c6a0..000000000000 --- a/drivers/net/eepro100.c +++ /dev/null @@ -1,2400 +0,0 @@ -/* drivers/net/eepro100.c: An Intel i82557-559 Ethernet driver for Linux. */ -/* - Written 1996-1999 by Donald Becker. - - The driver also contains updates by different kernel developers - (see incomplete list below). - Current maintainer is Andrey V. Savochkin . - Please use this email address and linux-kernel mailing list for bug reports. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - This driver is for the Intel EtherExpress Pro100 (Speedo3) design. - It should work with all i82557/558/559 boards. - - Version history: - 1998 Apr - 2000 Feb Andrey V. Savochkin - Serious fixes for multicast filter list setting, TX timeout routine; - RX ring refilling logic; other stuff - 2000 Feb Jeff Garzik - Convert to new PCI driver interface - 2000 Mar 24 Dragan Stancevic - Disabled FC and ER, to avoid lockups when when we get FCP interrupts. - 2000 Jul 17 Goutham Rao - PCI DMA API fixes, adding pci_dma_sync_single calls where neccesary - 2000 Aug 31 David Mosberger - rx_align support: enables rx DMA without causing unaligned accesses. -*/ - -static const char * const version = -"eepro100.c:v1.09j-t 9/29/99 Donald Becker\n" -"eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others\n"; - -/* A few user-configurable values that apply to all boards. - First set is undocumented and spelled per Intel recommendations. */ - -static int congenb /* = 0 */; /* Enable congestion control in the DP83840. */ -static int txfifo = 8; /* Tx FIFO threshold in 4 byte units, 0-15 */ -static int rxfifo = 8; /* Rx FIFO threshold, default 32 bytes. */ -/* Tx/Rx DMA burst length, 0-127, 0 == no preemption, tx==128 -> disabled. */ -static int txdmacount = 128; -static int rxdmacount /* = 0 */; - -#if defined(__ia64__) || defined(__alpha__) || defined(__sparc__) || defined(__mips__) || \ - defined(__arm__) - /* align rx buffers to 2 bytes so that IP header is aligned */ -# define rx_align(skb) skb_reserve((skb), 2) -# define RxFD_ALIGNMENT __attribute__ ((aligned (2), packed)) -#else -# define rx_align(skb) -# define RxFD_ALIGNMENT -#endif - -/* Set the copy breakpoint for the copy-only-tiny-buffer Rx method. - Lower values use more memory, but are faster. */ -static int rx_copybreak = 200; - -/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ -static int max_interrupt_work = 20; - -/* Maximum number of multicast addresses to filter (vs. rx-all-multicast) */ -static int multicast_filter_limit = 64; - -/* 'options' is used to pass a transceiver override or full-duplex flag - e.g. "options=16" for FD, "options=32" for 100mbps-only. */ -static int full_duplex[] = {-1, -1, -1, -1, -1, -1, -1, -1}; -static int options[] = {-1, -1, -1, -1, -1, -1, -1, -1}; - -/* A few values that may be tweaked. */ -/* The ring sizes should be a power of two for efficiency. */ -#define TX_RING_SIZE 64 -#define RX_RING_SIZE 64 -/* How much slots multicast filter setup may take. - Do not descrease without changing set_rx_mode() implementaion. */ -#define TX_MULTICAST_SIZE 2 -#define TX_MULTICAST_RESERV (TX_MULTICAST_SIZE*2) -/* Actual number of TX packets queued, must be - <= TX_RING_SIZE-TX_MULTICAST_RESERV. */ -#define TX_QUEUE_LIMIT (TX_RING_SIZE-TX_MULTICAST_RESERV) -/* Hysteresis marking queue as no longer full. */ -#define TX_QUEUE_UNFULL (TX_QUEUE_LIMIT-4) - -/* Operational parameters that usually are not changed. */ - -/* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (2*HZ) -/* Size of an pre-allocated Rx buffer: + slack.*/ -#define PKT_BUF_SZ 1536 - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -static int use_io; -static int debug = -1; -#define DEBUG_DEFAULT (NETIF_MSG_DRV | \ - NETIF_MSG_HW | \ - NETIF_MSG_RX_ERR | \ - NETIF_MSG_TX_ERR) -#define DEBUG ((debug >= 0) ? (1<"); -MODULE_DESCRIPTION("Intel i82557/i82558/i82559 PCI EtherExpressPro driver"); -MODULE_LICENSE("GPL"); -module_param(use_io, int, 0); -module_param(debug, int, 0); -module_param_array(options, int, NULL, 0); -module_param_array(full_duplex, int, NULL, 0); -module_param(congenb, int, 0); -module_param(txfifo, int, 0); -module_param(rxfifo, int, 0); -module_param(txdmacount, int, 0); -module_param(rxdmacount, int, 0); -module_param(rx_copybreak, int, 0); -module_param(max_interrupt_work, int, 0); -module_param(multicast_filter_limit, int, 0); -MODULE_PARM_DESC(debug, "debug level (0-6)"); -MODULE_PARM_DESC(options, "Bits 0-3: transceiver type, bit 4: full duplex, bit 5: 100Mbps"); -MODULE_PARM_DESC(full_duplex, "full duplex setting(s) (1)"); -MODULE_PARM_DESC(congenb, "Enable congestion control (1)"); -MODULE_PARM_DESC(txfifo, "Tx FIFO threshold in 4 byte units, (0-15)"); -MODULE_PARM_DESC(rxfifo, "Rx FIFO threshold in 4 byte units, (0-15)"); -MODULE_PARM_DESC(txdmacount, "Tx DMA burst length; 128 - disable (0-128)"); -MODULE_PARM_DESC(rxdmacount, "Rx DMA burst length; 128 - disable (0-128)"); -MODULE_PARM_DESC(rx_copybreak, "copy breakpoint for copy-only-tiny-frames"); -MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt"); -MODULE_PARM_DESC(multicast_filter_limit, "maximum number of filtered multicast addresses"); - -#define RUN_AT(x) (jiffies + (x)) - -#define netdevice_start(dev) -#define netdevice_stop(dev) -#define netif_set_tx_timeout(dev, tf, tm) \ - do { \ - (dev)->tx_timeout = (tf); \ - (dev)->watchdog_timeo = (tm); \ - } while(0) - - - -/* - Theory of Operation - -I. Board Compatibility - -This device driver is designed for the Intel i82557 "Speedo3" chip, Intel's -single-chip fast Ethernet controller for PCI, as used on the Intel -EtherExpress Pro 100 adapter. - -II. Board-specific settings - -PCI bus devices are configured by the system at boot time, so no jumpers -need to be set on the board. The system BIOS should be set to assign the -PCI INTA signal to an otherwise unused system IRQ line. While it's -possible to share PCI interrupt lines, it negatively impacts performance and -only recent kernels support it. - -III. Driver operation - -IIIA. General -The Speedo3 is very similar to other Intel network chips, that is to say -"apparently designed on a different planet". This chips retains the complex -Rx and Tx descriptors and multiple buffers pointers as previous chips, but -also has simplified Tx and Rx buffer modes. This driver uses the "flexible" -Tx mode, but in a simplified lower-overhead manner: it associates only a -single buffer descriptor with each frame descriptor. - -Despite the extra space overhead in each receive skbuff, the driver must use -the simplified Rx buffer mode to assure that only a single data buffer is -associated with each RxFD. The driver implements this by reserving space -for the Rx descriptor at the head of each Rx skbuff. - -The Speedo-3 has receive and command unit base addresses that are added to -almost all descriptor pointers. The driver sets these to zero, so that all -pointer fields are absolute addresses. - -The System Control Block (SCB) of some previous Intel chips exists on the -chip in both PCI I/O and memory space. This driver uses the I/O space -registers, but might switch to memory mapped mode to better support non-x86 -processors. - -IIIB. Transmit structure - -The driver must use the complex Tx command+descriptor mode in order to -have a indirect pointer to the skbuff data section. Each Tx command block -(TxCB) is associated with two immediately appended Tx Buffer Descriptor -(TxBD). A fixed ring of these TxCB+TxBD pairs are kept as part of the -speedo_private data structure for each adapter instance. - -The newer i82558 explicitly supports this structure, and can read the two -TxBDs in the same PCI burst as the TxCB. - -This ring structure is used for all normal transmit packets, but the -transmit packet descriptors aren't long enough for most non-Tx commands such -as CmdConfigure. This is complicated by the possibility that the chip has -already loaded the link address in the previous descriptor. So for these -commands we convert the next free descriptor on the ring to a NoOp, and point -that descriptor's link to the complex command. - -An additional complexity of these non-transmit commands are that they may be -added asynchronous to the normal transmit queue, so we disable interrupts -whenever the Tx descriptor ring is manipulated. - -A notable aspect of these special configure commands is that they do -work with the normal Tx ring entry scavenge method. The Tx ring scavenge -is done at interrupt time using the 'dirty_tx' index, and checking for the -command-complete bit. While the setup frames may have the NoOp command on the -Tx ring marked as complete, but not have completed the setup command, this -is not a problem. The tx_ring entry can be still safely reused, as the -tx_skbuff[] entry is always empty for config_cmd and mc_setup frames. - -Commands may have bits set e.g. CmdSuspend in the command word to either -suspend or stop the transmit/command unit. This driver always flags the last -command with CmdSuspend, erases the CmdSuspend in the previous command, and -then issues a CU_RESUME. -Note: Watch out for the potential race condition here: imagine - erasing the previous suspend - the chip processes the previous command - the chip processes the final command, and suspends - doing the CU_RESUME - the chip processes the next-yet-valid post-final-command. -So blindly sending a CU_RESUME is only safe if we do it immediately after -after erasing the previous CmdSuspend, without the possibility of an -intervening delay. Thus the resume command is always within the -interrupts-disabled region. This is a timing dependence, but handling this -condition in a timing-independent way would considerably complicate the code. - -Note: In previous generation Intel chips, restarting the command unit was a -notoriously slow process. This is presumably no longer true. - -IIIC. Receive structure - -Because of the bus-master support on the Speedo3 this driver uses the new -SKBUFF_RX_COPYBREAK scheme, rather than a fixed intermediate receive buffer. -This scheme allocates full-sized skbuffs as receive buffers. The value -SKBUFF_RX_COPYBREAK is used as the copying breakpoint: it is chosen to -trade-off the memory wasted by passing the full-sized skbuff to the queue -layer for all frames vs. the copying cost of copying a frame to a -correctly-sized skbuff. - -For small frames the copying cost is negligible (esp. considering that we -are pre-loading the cache with immediately useful header information), so we -allocate a new, minimally-sized skbuff. For large frames the copying cost -is non-trivial, and the larger copy might flush the cache of useful data, so -we pass up the skbuff the packet was received into. - -IV. Notes - -Thanks to Steve Williams of Intel for arranging the non-disclosure agreement -that stated that I could disclose the information. But I still resent -having to sign an Intel NDA when I'm helping Intel sell their own product! - -*/ - -static int speedo_found1(struct pci_dev *pdev, void __iomem *ioaddr, int fnd_cnt, int acpi_idle_state); - -/* Offsets to the various registers. - All accesses need not be longword aligned. */ -enum speedo_offsets { - SCBStatus = 0, SCBCmd = 2, /* Rx/Command Unit command and status. */ - SCBIntmask = 3, - SCBPointer = 4, /* General purpose pointer. */ - SCBPort = 8, /* Misc. commands and operands. */ - SCBflash = 12, SCBeeprom = 14, /* EEPROM and flash memory control. */ - SCBCtrlMDI = 16, /* MDI interface control. */ - SCBEarlyRx = 20, /* Early receive byte count. */ -}; -/* Commands that can be put in a command list entry. */ -enum commands { - CmdNOp = 0, CmdIASetup = 0x10000, CmdConfigure = 0x20000, - CmdMulticastList = 0x30000, CmdTx = 0x40000, CmdTDR = 0x50000, - CmdDump = 0x60000, CmdDiagnose = 0x70000, - CmdSuspend = 0x40000000, /* Suspend after completion. */ - CmdIntr = 0x20000000, /* Interrupt after completion. */ - CmdTxFlex = 0x00080000, /* Use "Flexible mode" for CmdTx command. */ -}; -/* Clear CmdSuspend (1<<30) avoiding interference with the card access to the - status bits. Previous driver versions used separate 16 bit fields for - commands and statuses. --SAW - */ -#if defined(__alpha__) -# define clear_suspend(cmd) clear_bit(30, &(cmd)->cmd_status); -#else -# define clear_suspend(cmd) ((__le16 *)&(cmd)->cmd_status)[1] &= ~cpu_to_le16(1<<14) -#endif - -enum SCBCmdBits { - SCBMaskCmdDone=0x8000, SCBMaskRxDone=0x4000, SCBMaskCmdIdle=0x2000, - SCBMaskRxSuspend=0x1000, SCBMaskEarlyRx=0x0800, SCBMaskFlowCtl=0x0400, - SCBTriggerIntr=0x0200, SCBMaskAll=0x0100, - /* The rest are Rx and Tx commands. */ - CUStart=0x0010, CUResume=0x0020, CUStatsAddr=0x0040, CUShowStats=0x0050, - CUCmdBase=0x0060, /* CU Base address (set to zero) . */ - CUDumpStats=0x0070, /* Dump then reset stats counters. */ - RxStart=0x0001, RxResume=0x0002, RxAbort=0x0004, RxAddrLoad=0x0006, - RxResumeNoResources=0x0007, -}; - -enum SCBPort_cmds { - PortReset=0, PortSelfTest=1, PortPartialReset=2, PortDump=3, -}; - -/* The Speedo3 Rx and Tx frame/buffer descriptors. */ -struct descriptor { /* A generic descriptor. */ - volatile __le32 cmd_status; /* All command and status fields. */ - __le32 link; /* struct descriptor * */ - unsigned char params[0]; -}; - -/* The Speedo3 Rx and Tx buffer descriptors. */ -struct RxFD { /* Receive frame descriptor. */ - volatile __le32 status; - __le32 link; /* struct RxFD * */ - __le32 rx_buf_addr; /* void * */ - __le32 count; -} RxFD_ALIGNMENT; - -/* Selected elements of the Tx/RxFD.status word. */ -enum RxFD_bits { - RxComplete=0x8000, RxOK=0x2000, - RxErrCRC=0x0800, RxErrAlign=0x0400, RxErrTooBig=0x0200, RxErrSymbol=0x0010, - RxEth2Type=0x0020, RxNoMatch=0x0004, RxNoIAMatch=0x0002, - TxUnderrun=0x1000, StatusComplete=0x8000, -}; - -#define CONFIG_DATA_SIZE 22 -struct TxFD { /* Transmit frame descriptor set. */ - __le32 status; - __le32 link; /* void * */ - __le32 tx_desc_addr; /* Always points to the tx_buf_addr element. */ - __le32 count; /* # of TBD (=1), Tx start thresh., etc. */ - /* This constitutes two "TBD" entries -- we only use one. */ -#define TX_DESCR_BUF_OFFSET 16 - __le32 tx_buf_addr0; /* void *, frame to be transmitted. */ - __le32 tx_buf_size0; /* Length of Tx frame. */ - __le32 tx_buf_addr1; /* void *, frame to be transmitted. */ - __le32 tx_buf_size1; /* Length of Tx frame. */ - /* the structure must have space for at least CONFIG_DATA_SIZE starting - * from tx_desc_addr field */ -}; - -/* Multicast filter setting block. --SAW */ -struct speedo_mc_block { - struct speedo_mc_block *next; - unsigned int tx; - dma_addr_t frame_dma; - unsigned int len; - struct descriptor frame __attribute__ ((__aligned__(16))); -}; - -/* Elements of the dump_statistics block. This block must be lword aligned. */ -struct speedo_stats { - __le32 tx_good_frames; - __le32 tx_coll16_errs; - __le32 tx_late_colls; - __le32 tx_underruns; - __le32 tx_lost_carrier; - __le32 tx_deferred; - __le32 tx_one_colls; - __le32 tx_multi_colls; - __le32 tx_total_colls; - __le32 rx_good_frames; - __le32 rx_crc_errs; - __le32 rx_align_errs; - __le32 rx_resource_errs; - __le32 rx_overrun_errs; - __le32 rx_colls_errs; - __le32 rx_runt_errs; - __le32 done_marker; -}; - -enum Rx_ring_state_bits { - RrNoMem=1, RrPostponed=2, RrNoResources=4, RrOOMReported=8, -}; - -/* Do not change the position (alignment) of the first few elements! - The later elements are grouped for cache locality. - - Unfortunately, all the positions have been shifted since there. - A new re-alignment is required. 2000/03/06 SAW */ -struct speedo_private { - void __iomem *regs; - struct TxFD *tx_ring; /* Commands (usually CmdTxPacket). */ - struct RxFD *rx_ringp[RX_RING_SIZE]; /* Rx descriptor, used as ring. */ - /* The addresses of a Tx/Rx-in-place packets/buffers. */ - struct sk_buff *tx_skbuff[TX_RING_SIZE]; - struct sk_buff *rx_skbuff[RX_RING_SIZE]; - /* Mapped addresses of the rings. */ - dma_addr_t tx_ring_dma; -#define TX_RING_ELEM_DMA(sp, n) ((sp)->tx_ring_dma + (n)*sizeof(struct TxFD)) - dma_addr_t rx_ring_dma[RX_RING_SIZE]; - struct descriptor *last_cmd; /* Last command sent. */ - unsigned int cur_tx, dirty_tx; /* The ring entries to be free()ed. */ - spinlock_t lock; /* Group with Tx control cache line. */ - u32 tx_threshold; /* The value for txdesc.count. */ - struct RxFD *last_rxf; /* Last filled RX buffer. */ - dma_addr_t last_rxf_dma; - unsigned int cur_rx, dirty_rx; /* The next free ring entry */ - long last_rx_time; /* Last Rx, in jiffies, to handle Rx hang. */ - struct net_device_stats stats; - struct speedo_stats *lstats; - dma_addr_t lstats_dma; - int chip_id; - struct pci_dev *pdev; - struct timer_list timer; /* Media selection timer. */ - struct speedo_mc_block *mc_setup_head; /* Multicast setup frame list head. */ - struct speedo_mc_block *mc_setup_tail; /* Multicast setup frame list tail. */ - long in_interrupt; /* Word-aligned dev->interrupt */ - unsigned char acpi_pwr; - signed char rx_mode; /* Current PROMISC/ALLMULTI setting. */ - unsigned int tx_full:1; /* The Tx queue is full. */ - unsigned int flow_ctrl:1; /* Use 802.3x flow control. */ - unsigned int rx_bug:1; /* Work around receiver hang errata. */ - unsigned char default_port:8; /* Last dev->if_port value. */ - unsigned char rx_ring_state; /* RX ring status flags. */ - unsigned short phy[2]; /* PHY media interfaces available. */ - unsigned short partner; /* Link partner caps. */ - struct mii_if_info mii_if; /* MII API hooks, info */ - u32 msg_enable; /* debug message level */ -}; - -/* The parameters for a CmdConfigure operation. - There are so many options that it would be difficult to document each bit. - We mostly use the default or recommended settings. */ -static const char i82557_config_cmd[CONFIG_DATA_SIZE] = { - 22, 0x08, 0, 0, 0, 0, 0x32, 0x03, 1, /* 1=Use MII 0=Use AUI */ - 0, 0x2E, 0, 0x60, 0, - 0xf2, 0x48, 0, 0x40, 0xf2, 0x80, /* 0x40=Force full-duplex */ - 0x3f, 0x05, }; -static const char i82558_config_cmd[CONFIG_DATA_SIZE] = { - 22, 0x08, 0, 1, 0, 0, 0x22, 0x03, 1, /* 1=Use MII 0=Use AUI */ - 0, 0x2E, 0, 0x60, 0x08, 0x88, - 0x68, 0, 0x40, 0xf2, 0x84, /* Disable FC */ - 0x31, 0x05, }; - -/* PHY media interface chips. */ -static const char * const phys[] = { - "None", "i82553-A/B", "i82553-C", "i82503", - "DP83840", "80c240", "80c24", "i82555", - "unknown-8", "unknown-9", "DP83840A", "unknown-11", - "unknown-12", "unknown-13", "unknown-14", "unknown-15", }; -enum phy_chips { NonSuchPhy=0, I82553AB, I82553C, I82503, DP83840, S80C240, - S80C24, I82555, DP83840A=10, }; -static const char is_mii[] = { 0, 1, 1, 0, 1, 1, 0, 1 }; -#define EE_READ_CMD (6) - -static int eepro100_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent); - -static int do_eeprom_cmd(void __iomem *ioaddr, int cmd, int cmd_len); -static int mdio_read(struct net_device *dev, int phy_id, int location); -static void mdio_write(struct net_device *dev, int phy_id, int location, int value); -static int speedo_open(struct net_device *dev); -static void speedo_resume(struct net_device *dev); -static void speedo_timer(unsigned long data); -static void speedo_init_rx_ring(struct net_device *dev); -static void speedo_tx_timeout(struct net_device *dev); -static int speedo_start_xmit(struct sk_buff *skb, struct net_device *dev); -static void speedo_refill_rx_buffers(struct net_device *dev, int force); -static int speedo_rx(struct net_device *dev); -static void speedo_tx_buffer_gc(struct net_device *dev); -static irqreturn_t speedo_interrupt(int irq, void *dev_instance); -static int speedo_close(struct net_device *dev); -static struct net_device_stats *speedo_get_stats(struct net_device *dev); -static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static void set_rx_mode(struct net_device *dev); -static void speedo_show_state(struct net_device *dev); -static const struct ethtool_ops ethtool_ops; - - - -#ifdef honor_default_port -/* Optional driver feature to allow forcing the transceiver setting. - Not recommended. */ -static int mii_ctrl[8] = { 0x3300, 0x3100, 0x0000, 0x0100, - 0x2000, 0x2100, 0x0400, 0x3100}; -#endif - -/* How to wait for the command unit to accept a command. - Typically this takes 0 ticks. */ -static inline unsigned char wait_for_cmd_done(struct net_device *dev, - struct speedo_private *sp) -{ - int wait = 1000; - void __iomem *cmd_ioaddr = sp->regs + SCBCmd; - unsigned char r; - - do { - udelay(1); - r = ioread8(cmd_ioaddr); - } while(r && --wait >= 0); - - if (wait < 0) - printk(KERN_ALERT "%s: wait_for_cmd_done timeout!\n", dev->name); - return r; -} - -static int __devinit eepro100_init_one (struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - void __iomem *ioaddr; - int irq, pci_bar; - int acpi_idle_state = 0, pm; - static int cards_found /* = 0 */; - unsigned long pci_base; - -#ifndef MODULE - /* when built-in, we only print version if device is found */ - static int did_version; - if (did_version++ == 0) - printk(version); -#endif - - /* save power state before pci_enable_device overwrites it */ - pm = pci_find_capability(pdev, PCI_CAP_ID_PM); - if (pm) { - u16 pwr_command; - pci_read_config_word(pdev, pm + PCI_PM_CTRL, &pwr_command); - acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK; - } - - if (pci_enable_device(pdev)) - goto err_out_free_mmio_region; - - pci_set_master(pdev); - - if (!request_region(pci_resource_start(pdev, 1), - pci_resource_len(pdev, 1), "eepro100")) { - dev_err(&pdev->dev, "eepro100: cannot reserve I/O ports\n"); - goto err_out_none; - } - if (!request_mem_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0), "eepro100")) { - dev_err(&pdev->dev, "eepro100: cannot reserve MMIO region\n"); - goto err_out_free_pio_region; - } - - irq = pdev->irq; - pci_bar = use_io ? 1 : 0; - pci_base = pci_resource_start(pdev, pci_bar); - if (DEBUG & NETIF_MSG_PROBE) - printk("Found Intel i82557 PCI Speedo at %#lx, IRQ %d.\n", - pci_base, irq); - - ioaddr = pci_iomap(pdev, pci_bar, 0); - if (!ioaddr) { - dev_err(&pdev->dev, "eepro100: cannot remap IO\n"); - goto err_out_free_mmio_region; - } - - if (speedo_found1(pdev, ioaddr, cards_found, acpi_idle_state) == 0) - cards_found++; - else - goto err_out_iounmap; - - return 0; - -err_out_iounmap: ; - pci_iounmap(pdev, ioaddr); -err_out_free_mmio_region: - release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); -err_out_free_pio_region: - release_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1)); -err_out_none: - return -ENODEV; -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ - -static void poll_speedo (struct net_device *dev) -{ - /* disable_irq is not very nice, but with the funny lockless design - we have no other choice. */ - disable_irq(dev->irq); - speedo_interrupt (dev->irq, dev); - enable_irq(dev->irq); -} -#endif - -static int __devinit speedo_found1(struct pci_dev *pdev, - void __iomem *ioaddr, int card_idx, int acpi_idle_state) -{ - struct net_device *dev; - struct speedo_private *sp; - const char *product; - int i, option; - u16 eeprom[0x100]; - int size; - void *tx_ring_space; - dma_addr_t tx_ring_dma; - - size = TX_RING_SIZE * sizeof(struct TxFD) + sizeof(struct speedo_stats); - tx_ring_space = pci_alloc_consistent(pdev, size, &tx_ring_dma); - if (tx_ring_space == NULL) - return -1; - - dev = alloc_etherdev(sizeof(struct speedo_private)); - if (dev == NULL) { - printk(KERN_ERR "eepro100: Could not allocate ethernet device.\n"); - pci_free_consistent(pdev, size, tx_ring_space, tx_ring_dma); - return -1; - } - - SET_NETDEV_DEV(dev, &pdev->dev); - - if (dev->mem_start > 0) - option = dev->mem_start; - else if (card_idx >= 0 && options[card_idx] >= 0) - option = options[card_idx]; - else - option = 0; - - rtnl_lock(); - if (dev_alloc_name(dev, dev->name) < 0) - goto err_free_unlock; - - /* Read the station address EEPROM before doing the reset. - Nominally his should even be done before accepting the device, but - then we wouldn't have a device name with which to report the error. - The size test is for 6 bit vs. 8 bit address serial EEPROMs. - */ - { - void __iomem *iobase; - int read_cmd, ee_size; - u16 sum; - int j; - - /* Use IO only to avoid postponed writes and satisfy EEPROM timing - requirements. */ - iobase = pci_iomap(pdev, 1, pci_resource_len(pdev, 1)); - if (!iobase) - goto err_free_unlock; - if ((do_eeprom_cmd(iobase, EE_READ_CMD << 24, 27) & 0xffe0000) - == 0xffe0000) { - ee_size = 0x100; - read_cmd = EE_READ_CMD << 24; - } else { - ee_size = 0x40; - read_cmd = EE_READ_CMD << 22; - } - - for (j = 0, i = 0, sum = 0; i < ee_size; i++) { - u16 value = do_eeprom_cmd(iobase, read_cmd | (i << 16), 27); - eeprom[i] = value; - sum += value; - if (i < 3) { - dev->dev_addr[j++] = value; - dev->dev_addr[j++] = value >> 8; - } - } - if (sum != 0xBABA) - printk(KERN_WARNING "%s: Invalid EEPROM checksum %#4.4x, " - "check settings before activating this device!\n", - dev->name, sum); - /* Don't unregister_netdev(dev); as the EEPro may actually be - usable, especially if the MAC address is set later. - On the other hand, it may be unusable if MDI data is corrupted. */ - - pci_iounmap(pdev, iobase); - } - - /* Reset the chip: stop Tx and Rx processes and clear counters. - This takes less than 10usec and will easily finish before the next - action. */ - iowrite32(PortReset, ioaddr + SCBPort); - ioread32(ioaddr + SCBPort); - udelay(10); - - if (eeprom[3] & 0x0100) - product = "OEM i82557/i82558 10/100 Ethernet"; - else - product = pci_name(pdev); - - printk(KERN_INFO "%s: %s, %pM, IRQ %d.\n", dev->name, product, - dev->dev_addr, pdev->irq); - - sp = netdev_priv(dev); - - /* we must initialize this early, for mdio_{read,write} */ - sp->regs = ioaddr; - -#if 1 || defined(kernel_bloat) - /* OK, this is pure kernel bloat. I don't like it when other drivers - waste non-pageable kernel space to emit similar messages, but I need - them for bug reports. */ - { - const char *connectors[] = {" RJ45", " BNC", " AUI", " MII"}; - /* The self-test results must be paragraph aligned. */ - volatile s32 *self_test_results; - int boguscnt = 16000; /* Timeout for set-test. */ - if ((eeprom[3] & 0x03) != 0x03) - printk(KERN_INFO " Receiver lock-up bug exists -- enabling" - " work-around.\n"); - printk(KERN_INFO " Board assembly %4.4x%2.2x-%3.3d, Physical" - " connectors present:", - eeprom[8], eeprom[9]>>8, eeprom[9] & 0xff); - for (i = 0; i < 4; i++) - if (eeprom[5] & (1<>8)&15], eeprom[6] & 0x1f); - if (eeprom[7] & 0x0700) - printk(KERN_INFO " Secondary interface chip %s.\n", - phys[(eeprom[7]>>8)&7]); - if (((eeprom[6]>>8) & 0x3f) == DP83840 - || ((eeprom[6]>>8) & 0x3f) == DP83840A) { - int mdi_reg23 = mdio_read(dev, eeprom[6] & 0x1f, 23) | 0x0422; - if (congenb) - mdi_reg23 |= 0x0100; - printk(KERN_INFO" DP83840 specific setup, setting register 23 to %4.4x.\n", - mdi_reg23); - mdio_write(dev, eeprom[6] & 0x1f, 23, mdi_reg23); - } - if ((option >= 0) && (option & 0x70)) { - printk(KERN_INFO " Forcing %dMbs %s-duplex operation.\n", - (option & 0x20 ? 100 : 10), - (option & 0x10 ? "full" : "half")); - mdio_write(dev, eeprom[6] & 0x1f, MII_BMCR, - ((option & 0x20) ? 0x2000 : 0) | /* 100mbps? */ - ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */ - } - - /* Perform a system self-test. */ - self_test_results = (s32*) ((((long) tx_ring_space) + 15) & ~0xf); - self_test_results[0] = 0; - self_test_results[1] = -1; - iowrite32(tx_ring_dma | PortSelfTest, ioaddr + SCBPort); - do { - udelay(10); - } while (self_test_results[1] == -1 && --boguscnt >= 0); - - if (boguscnt < 0) { /* Test optimized out. */ - printk(KERN_ERR "Self test failed, status %8.8x:\n" - KERN_ERR " Failure to initialize the i82557.\n" - KERN_ERR " Verify that the card is a bus-master" - " capable slot.\n", - self_test_results[1]); - } else - printk(KERN_INFO " General self-test: %s.\n" - KERN_INFO " Serial sub-system self-test: %s.\n" - KERN_INFO " Internal registers self-test: %s.\n" - KERN_INFO " ROM checksum self-test: %s (%#8.8x).\n", - self_test_results[1] & 0x1000 ? "failed" : "passed", - self_test_results[1] & 0x0020 ? "failed" : "passed", - self_test_results[1] & 0x0008 ? "failed" : "passed", - self_test_results[1] & 0x0004 ? "failed" : "passed", - self_test_results[0]); - } -#endif /* kernel_bloat */ - - iowrite32(PortReset, ioaddr + SCBPort); - ioread32(ioaddr + SCBPort); - udelay(10); - - /* Return the chip to its original power state. */ - pci_set_power_state(pdev, acpi_idle_state); - - pci_set_drvdata (pdev, dev); - SET_NETDEV_DEV(dev, &pdev->dev); - - dev->irq = pdev->irq; - - sp->pdev = pdev; - sp->msg_enable = DEBUG; - sp->acpi_pwr = acpi_idle_state; - sp->tx_ring = tx_ring_space; - sp->tx_ring_dma = tx_ring_dma; - sp->lstats = (struct speedo_stats *)(sp->tx_ring + TX_RING_SIZE); - sp->lstats_dma = TX_RING_ELEM_DMA(sp, TX_RING_SIZE); - init_timer(&sp->timer); /* used in ioctl() */ - spin_lock_init(&sp->lock); - - sp->mii_if.full_duplex = option >= 0 && (option & 0x10) ? 1 : 0; - if (card_idx >= 0) { - if (full_duplex[card_idx] >= 0) - sp->mii_if.full_duplex = full_duplex[card_idx]; - } - sp->default_port = option >= 0 ? (option & 0x0f) : 0; - - sp->phy[0] = eeprom[6]; - sp->phy[1] = eeprom[7]; - - sp->mii_if.phy_id = eeprom[6] & 0x1f; - sp->mii_if.phy_id_mask = 0x1f; - sp->mii_if.reg_num_mask = 0x1f; - sp->mii_if.dev = dev; - sp->mii_if.mdio_read = mdio_read; - sp->mii_if.mdio_write = mdio_write; - - sp->rx_bug = (eeprom[3] & 0x03) == 3 ? 0 : 1; - if (((pdev->device > 0x1030 && (pdev->device < 0x103F))) - || (pdev->device == 0x2449) || (pdev->device == 0x2459) - || (pdev->device == 0x245D)) { - sp->chip_id = 1; - } - - if (sp->rx_bug) - printk(KERN_INFO " Receiver lock-up workaround activated.\n"); - - /* The Speedo-specific entries in the device structure. */ - dev->open = &speedo_open; - dev->hard_start_xmit = &speedo_start_xmit; - netif_set_tx_timeout(dev, &speedo_tx_timeout, TX_TIMEOUT); - dev->stop = &speedo_close; - dev->get_stats = &speedo_get_stats; - dev->set_multicast_list = &set_rx_mode; - dev->do_ioctl = &speedo_ioctl; - SET_ETHTOOL_OPS(dev, ðtool_ops); -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = &poll_speedo; -#endif - - if (register_netdevice(dev)) - goto err_free_unlock; - rtnl_unlock(); - - return 0; - - err_free_unlock: - rtnl_unlock(); - free_netdev(dev); - return -1; -} - -static void do_slow_command(struct net_device *dev, struct speedo_private *sp, int cmd) -{ - void __iomem *cmd_ioaddr = sp->regs + SCBCmd; - int wait = 0; - do - if (ioread8(cmd_ioaddr) == 0) break; - while(++wait <= 200); - if (wait > 100) - printk(KERN_ERR "Command %4.4x never accepted (%d polls)!\n", - ioread8(cmd_ioaddr), wait); - - iowrite8(cmd, cmd_ioaddr); - - for (wait = 0; wait <= 100; wait++) - if (ioread8(cmd_ioaddr) == 0) return; - for (; wait <= 20000; wait++) - if (ioread8(cmd_ioaddr) == 0) return; - else udelay(1); - printk(KERN_ERR "Command %4.4x was not accepted after %d polls!" - " Current status %8.8x.\n", - cmd, wait, ioread32(sp->regs + SCBStatus)); -} - -/* Serial EEPROM section. - A "bit" grungy, but we work our way through bit-by-bit :->. */ -/* EEPROM_Ctrl bits. */ -#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */ -#define EE_CS 0x02 /* EEPROM chip select. */ -#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */ -#define EE_DATA_READ 0x08 /* EEPROM chip data out. */ -#define EE_ENB (0x4800 | EE_CS) -#define EE_WRITE_0 0x4802 -#define EE_WRITE_1 0x4806 -#define EE_OFFSET SCBeeprom - -/* The fixes for the code were kindly provided by Dragan Stancevic - to strictly follow Intel specifications of EEPROM - access timing. - The publicly available sheet 64486302 (sec. 3.1) specifies 1us access - interval for serial EEPROM. However, it looks like that there is an - additional requirement dictating larger udelay's in the code below. - 2000/05/24 SAW */ -static int __devinit do_eeprom_cmd(void __iomem *ioaddr, int cmd, int cmd_len) -{ - unsigned retval = 0; - void __iomem *ee_addr = ioaddr + SCBeeprom; - - iowrite16(EE_ENB, ee_addr); udelay(2); - iowrite16(EE_ENB | EE_SHIFT_CLK, ee_addr); udelay(2); - - /* Shift the command bits out. */ - do { - short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0; - iowrite16(dataval, ee_addr); udelay(2); - iowrite16(dataval | EE_SHIFT_CLK, ee_addr); udelay(2); - retval = (retval << 1) | ((ioread16(ee_addr) & EE_DATA_READ) ? 1 : 0); - } while (--cmd_len >= 0); - iowrite16(EE_ENB, ee_addr); udelay(2); - - /* Terminate the EEPROM access. */ - iowrite16(EE_ENB & ~EE_CS, ee_addr); - return retval; -} - -static int mdio_read(struct net_device *dev, int phy_id, int location) -{ - struct speedo_private *sp = netdev_priv(dev); - void __iomem *ioaddr = sp->regs; - int val, boguscnt = 64*10; /* <64 usec. to complete, typ 27 ticks */ - iowrite32(0x08000000 | (location<<16) | (phy_id<<21), ioaddr + SCBCtrlMDI); - do { - val = ioread32(ioaddr + SCBCtrlMDI); - if (--boguscnt < 0) { - printk(KERN_ERR " mdio_read() timed out with val = %8.8x.\n", val); - break; - } - } while (! (val & 0x10000000)); - return val & 0xffff; -} - -static void mdio_write(struct net_device *dev, int phy_id, int location, int value) -{ - struct speedo_private *sp = netdev_priv(dev); - void __iomem *ioaddr = sp->regs; - int val, boguscnt = 64*10; /* <64 usec. to complete, typ 27 ticks */ - iowrite32(0x04000000 | (location<<16) | (phy_id<<21) | value, - ioaddr + SCBCtrlMDI); - do { - val = ioread32(ioaddr + SCBCtrlMDI); - if (--boguscnt < 0) { - printk(KERN_ERR" mdio_write() timed out with val = %8.8x.\n", val); - break; - } - } while (! (val & 0x10000000)); -} - -static int -speedo_open(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - void __iomem *ioaddr = sp->regs; - int retval; - - if (netif_msg_ifup(sp)) - printk(KERN_DEBUG "%s: speedo_open() irq %d.\n", dev->name, dev->irq); - - pci_set_power_state(sp->pdev, PCI_D0); - - /* Set up the Tx queue early.. */ - sp->cur_tx = 0; - sp->dirty_tx = 0; - sp->last_cmd = NULL; - sp->tx_full = 0; - sp->in_interrupt = 0; - - /* .. we can safely take handler calls during init. */ - retval = request_irq(dev->irq, &speedo_interrupt, IRQF_SHARED, dev->name, dev); - if (retval) { - return retval; - } - - dev->if_port = sp->default_port; - -#ifdef oh_no_you_dont_unless_you_honour_the_options_passed_in_to_us - /* Retrigger negotiation to reset previous errors. */ - if ((sp->phy[0] & 0x8000) == 0) { - int phy_addr = sp->phy[0] & 0x1f ; - /* Use 0x3300 for restarting NWay, other values to force xcvr: - 0x0000 10-HD - 0x0100 10-FD - 0x2000 100-HD - 0x2100 100-FD - */ -#ifdef honor_default_port - mdio_write(dev, phy_addr, MII_BMCR, mii_ctrl[dev->default_port & 7]); -#else - mdio_write(dev, phy_addr, MII_BMCR, 0x3300); -#endif - } -#endif - - speedo_init_rx_ring(dev); - - /* Fire up the hardware. */ - iowrite16(SCBMaskAll, ioaddr + SCBCmd); - speedo_resume(dev); - - netdevice_start(dev); - netif_start_queue(dev); - - /* Setup the chip and configure the multicast list. */ - sp->mc_setup_head = NULL; - sp->mc_setup_tail = NULL; - sp->flow_ctrl = sp->partner = 0; - sp->rx_mode = -1; /* Invalid -> always reset the mode. */ - set_rx_mode(dev); - if ((sp->phy[0] & 0x8000) == 0) - sp->mii_if.advertising = mdio_read(dev, sp->phy[0] & 0x1f, MII_ADVERTISE); - - mii_check_link(&sp->mii_if); - - if (netif_msg_ifup(sp)) { - printk(KERN_DEBUG "%s: Done speedo_open(), status %8.8x.\n", - dev->name, ioread16(ioaddr + SCBStatus)); - } - - /* Set the timer. The timer serves a dual purpose: - 1) to monitor the media interface (e.g. link beat) and perhaps switch - to an alternate media type - 2) to monitor Rx activity, and restart the Rx process if the receiver - hangs. */ - sp->timer.expires = RUN_AT((24*HZ)/10); /* 2.4 sec. */ - sp->timer.data = (unsigned long)dev; - sp->timer.function = &speedo_timer; /* timer handler */ - add_timer(&sp->timer); - - /* No need to wait for the command unit to accept here. */ - if ((sp->phy[0] & 0x8000) == 0) - mdio_read(dev, sp->phy[0] & 0x1f, MII_BMCR); - - return 0; -} - -/* Start the chip hardware after a full reset. */ -static void speedo_resume(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - void __iomem *ioaddr = sp->regs; - - /* Start with a Tx threshold of 256 (0x..20.... 8 byte units). */ - sp->tx_threshold = 0x01208000; - - /* Set the segment registers to '0'. */ - if (wait_for_cmd_done(dev, sp) != 0) { - iowrite32(PortPartialReset, ioaddr + SCBPort); - udelay(10); - } - - iowrite32(0, ioaddr + SCBPointer); - ioread32(ioaddr + SCBPointer); /* Flush to PCI. */ - udelay(10); /* Bogus, but it avoids the bug. */ - - /* Note: these next two operations can take a while. */ - do_slow_command(dev, sp, RxAddrLoad); - do_slow_command(dev, sp, CUCmdBase); - - /* Load the statistics block and rx ring addresses. */ - iowrite32(sp->lstats_dma, ioaddr + SCBPointer); - ioread32(ioaddr + SCBPointer); /* Flush to PCI */ - - iowrite8(CUStatsAddr, ioaddr + SCBCmd); - sp->lstats->done_marker = 0; - wait_for_cmd_done(dev, sp); - - if (sp->rx_ringp[sp->cur_rx % RX_RING_SIZE] == NULL) { - if (netif_msg_rx_err(sp)) - printk(KERN_DEBUG "%s: NULL cur_rx in speedo_resume().\n", - dev->name); - } else { - iowrite32(sp->rx_ring_dma[sp->cur_rx % RX_RING_SIZE], - ioaddr + SCBPointer); - ioread32(ioaddr + SCBPointer); /* Flush to PCI */ - } - - /* Note: RxStart should complete instantly. */ - do_slow_command(dev, sp, RxStart); - do_slow_command(dev, sp, CUDumpStats); - - /* Fill the first command with our physical address. */ - { - struct descriptor *ias_cmd; - - ias_cmd = - (struct descriptor *)&sp->tx_ring[sp->cur_tx++ % TX_RING_SIZE]; - /* Avoid a bug(?!) here by marking the command already completed. */ - ias_cmd->cmd_status = cpu_to_le32((CmdSuspend | CmdIASetup) | 0xa000); - ias_cmd->link = - cpu_to_le32(TX_RING_ELEM_DMA(sp, sp->cur_tx % TX_RING_SIZE)); - memcpy(ias_cmd->params, dev->dev_addr, 6); - if (sp->last_cmd) - clear_suspend(sp->last_cmd); - sp->last_cmd = ias_cmd; - } - - /* Start the chip's Tx process and unmask interrupts. */ - iowrite32(TX_RING_ELEM_DMA(sp, sp->dirty_tx % TX_RING_SIZE), - ioaddr + SCBPointer); - /* We are not ACK-ing FCP and ER in the interrupt handler yet so they should - remain masked --Dragan */ - iowrite16(CUStart | SCBMaskEarlyRx | SCBMaskFlowCtl, ioaddr + SCBCmd); -} - -/* - * Sometimes the receiver stops making progress. This routine knows how to - * get it going again, without losing packets or being otherwise nasty like - * a chip reset would be. Previously the driver had a whole sequence - * of if RxSuspended, if it's no buffers do one thing, if it's no resources, - * do another, etc. But those things don't really matter. Separate logic - * in the ISR provides for allocating buffers--the other half of operation - * is just making sure the receiver is active. speedo_rx_soft_reset does that. - * This problem with the old, more involved algorithm is shown up under - * ping floods on the order of 60K packets/second on a 100Mbps fdx network. - */ -static void -speedo_rx_soft_reset(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - struct RxFD *rfd; - void __iomem *ioaddr; - - ioaddr = sp->regs; - if (wait_for_cmd_done(dev, sp) != 0) { - printk("%s: previous command stalled\n", dev->name); - return; - } - /* - * Put the hardware into a known state. - */ - iowrite8(RxAbort, ioaddr + SCBCmd); - - rfd = sp->rx_ringp[sp->cur_rx % RX_RING_SIZE]; - - rfd->rx_buf_addr = cpu_to_le32(0xffffffff); - - if (wait_for_cmd_done(dev, sp) != 0) { - printk("%s: RxAbort command stalled\n", dev->name); - return; - } - iowrite32(sp->rx_ring_dma[sp->cur_rx % RX_RING_SIZE], - ioaddr + SCBPointer); - iowrite8(RxStart, ioaddr + SCBCmd); -} - - -/* Media monitoring and control. */ -static void speedo_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct speedo_private *sp = netdev_priv(dev); - void __iomem *ioaddr = sp->regs; - int phy_num = sp->phy[0] & 0x1f; - - /* We have MII and lost link beat. */ - if ((sp->phy[0] & 0x8000) == 0) { - int partner = mdio_read(dev, phy_num, MII_LPA); - if (partner != sp->partner) { - int flow_ctrl = sp->mii_if.advertising & partner & 0x0400 ? 1 : 0; - if (netif_msg_link(sp)) { - printk(KERN_DEBUG "%s: Link status change.\n", dev->name); - printk(KERN_DEBUG "%s: Old partner %x, new %x, adv %x.\n", - dev->name, sp->partner, partner, sp->mii_if.advertising); - } - sp->partner = partner; - if (flow_ctrl != sp->flow_ctrl) { - sp->flow_ctrl = flow_ctrl; - sp->rx_mode = -1; /* Trigger a reload. */ - } - } - } - mii_check_link(&sp->mii_if); - if (netif_msg_timer(sp)) { - printk(KERN_DEBUG "%s: Media control tick, status %4.4x.\n", - dev->name, ioread16(ioaddr + SCBStatus)); - } - if (sp->rx_mode < 0 || - (sp->rx_bug && jiffies - sp->last_rx_time > 2*HZ)) { - /* We haven't received a packet in a Long Time. We might have been - bitten by the receiver hang bug. This can be cleared by sending - a set multicast list command. */ - if (netif_msg_timer(sp)) - printk(KERN_DEBUG "%s: Sending a multicast list set command" - " from a timer routine," - " m=%d, j=%ld, l=%ld.\n", - dev->name, sp->rx_mode, jiffies, sp->last_rx_time); - set_rx_mode(dev); - } - /* We must continue to monitor the media. */ - sp->timer.expires = RUN_AT(2*HZ); /* 2.0 sec. */ - add_timer(&sp->timer); -} - -static void speedo_show_state(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - int i; - - if (netif_msg_pktdata(sp)) { - printk(KERN_DEBUG "%s: Tx ring dump, Tx queue %u / %u:\n", - dev->name, sp->cur_tx, sp->dirty_tx); - for (i = 0; i < TX_RING_SIZE; i++) - printk(KERN_DEBUG "%s: %c%c%2d %8.8x.\n", dev->name, - i == sp->dirty_tx % TX_RING_SIZE ? '*' : ' ', - i == sp->cur_tx % TX_RING_SIZE ? '=' : ' ', - i, sp->tx_ring[i].status); - - printk(KERN_DEBUG "%s: Printing Rx ring" - " (next to receive into %u, dirty index %u).\n", - dev->name, sp->cur_rx, sp->dirty_rx); - for (i = 0; i < RX_RING_SIZE; i++) - printk(KERN_DEBUG "%s: %c%c%c%2d %8.8x.\n", dev->name, - sp->rx_ringp[i] == sp->last_rxf ? 'l' : ' ', - i == sp->dirty_rx % RX_RING_SIZE ? '*' : ' ', - i == sp->cur_rx % RX_RING_SIZE ? '=' : ' ', - i, (sp->rx_ringp[i] != NULL) ? - (unsigned)sp->rx_ringp[i]->status : 0); - } - -#if 0 - { - void __iomem *ioaddr = sp->regs; - int phy_num = sp->phy[0] & 0x1f; - for (i = 0; i < 16; i++) { - /* FIXME: what does it mean? --SAW */ - if (i == 6) i = 21; - printk(KERN_DEBUG "%s: PHY index %d register %d is %4.4x.\n", - dev->name, phy_num, i, mdio_read(dev, phy_num, i)); - } - } -#endif - -} - -/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ -static void -speedo_init_rx_ring(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - struct RxFD *rxf, *last_rxf = NULL; - dma_addr_t last_rxf_dma = 0 /* to shut up the compiler */; - int i; - - sp->cur_rx = 0; - - for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb; - skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD)); - if (skb) - rx_align(skb); /* Align IP on 16 byte boundary */ - sp->rx_skbuff[i] = skb; - if (skb == NULL) - break; /* OK. Just initially short of Rx bufs. */ - skb->dev = dev; /* Mark as being used by this device. */ - rxf = (struct RxFD *)skb->data; - sp->rx_ringp[i] = rxf; - sp->rx_ring_dma[i] = - pci_map_single(sp->pdev, rxf, - PKT_BUF_SZ + sizeof(struct RxFD), PCI_DMA_BIDIRECTIONAL); - skb_reserve(skb, sizeof(struct RxFD)); - if (last_rxf) { - last_rxf->link = cpu_to_le32(sp->rx_ring_dma[i]); - pci_dma_sync_single_for_device(sp->pdev, last_rxf_dma, - sizeof(struct RxFD), PCI_DMA_TODEVICE); - } - last_rxf = rxf; - last_rxf_dma = sp->rx_ring_dma[i]; - rxf->status = cpu_to_le32(0x00000001); /* '1' is flag value only. */ - rxf->link = 0; /* None yet. */ - /* This field unused by i82557. */ - rxf->rx_buf_addr = cpu_to_le32(0xffffffff); - rxf->count = cpu_to_le32(PKT_BUF_SZ << 16); - pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[i], - sizeof(struct RxFD), PCI_DMA_TODEVICE); - } - sp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); - /* Mark the last entry as end-of-list. */ - last_rxf->status = cpu_to_le32(0xC0000002); /* '2' is flag value only. */ - pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[RX_RING_SIZE-1], - sizeof(struct RxFD), PCI_DMA_TODEVICE); - sp->last_rxf = last_rxf; - sp->last_rxf_dma = last_rxf_dma; -} - -static void speedo_purge_tx(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - int entry; - - while ((int)(sp->cur_tx - sp->dirty_tx) > 0) { - entry = sp->dirty_tx % TX_RING_SIZE; - if (sp->tx_skbuff[entry]) { - sp->stats.tx_errors++; - pci_unmap_single(sp->pdev, - le32_to_cpu(sp->tx_ring[entry].tx_buf_addr0), - sp->tx_skbuff[entry]->len, PCI_DMA_TODEVICE); - dev_kfree_skb_irq(sp->tx_skbuff[entry]); - sp->tx_skbuff[entry] = NULL; - } - sp->dirty_tx++; - } - while (sp->mc_setup_head != NULL) { - struct speedo_mc_block *t; - if (netif_msg_tx_err(sp)) - printk(KERN_DEBUG "%s: freeing mc frame.\n", dev->name); - pci_unmap_single(sp->pdev, sp->mc_setup_head->frame_dma, - sp->mc_setup_head->len, PCI_DMA_TODEVICE); - t = sp->mc_setup_head->next; - kfree(sp->mc_setup_head); - sp->mc_setup_head = t; - } - sp->mc_setup_tail = NULL; - sp->tx_full = 0; - netif_wake_queue(dev); -} - -static void reset_mii(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - - /* Reset the MII transceiver, suggested by Fred Young @ scalable.com. */ - if ((sp->phy[0] & 0x8000) == 0) { - int phy_addr = sp->phy[0] & 0x1f; - int advertising = mdio_read(dev, phy_addr, MII_ADVERTISE); - int mii_bmcr = mdio_read(dev, phy_addr, MII_BMCR); - mdio_write(dev, phy_addr, MII_BMCR, 0x0400); - mdio_write(dev, phy_addr, MII_BMSR, 0x0000); - mdio_write(dev, phy_addr, MII_ADVERTISE, 0x0000); - mdio_write(dev, phy_addr, MII_BMCR, 0x8000); -#ifdef honor_default_port - mdio_write(dev, phy_addr, MII_BMCR, mii_ctrl[dev->default_port & 7]); -#else - mdio_read(dev, phy_addr, MII_BMCR); - mdio_write(dev, phy_addr, MII_BMCR, mii_bmcr); - mdio_write(dev, phy_addr, MII_ADVERTISE, advertising); -#endif - } -} - -static void speedo_tx_timeout(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - void __iomem *ioaddr = sp->regs; - int status = ioread16(ioaddr + SCBStatus); - unsigned long flags; - - if (netif_msg_tx_err(sp)) { - printk(KERN_WARNING "%s: Transmit timed out: status %4.4x " - " %4.4x at %d/%d command %8.8x.\n", - dev->name, status, ioread16(ioaddr + SCBCmd), - sp->dirty_tx, sp->cur_tx, - sp->tx_ring[sp->dirty_tx % TX_RING_SIZE].status); - - } - speedo_show_state(dev); -#if 0 - if ((status & 0x00C0) != 0x0080 - && (status & 0x003C) == 0x0010) { - /* Only the command unit has stopped. */ - printk(KERN_WARNING "%s: Trying to restart the transmitter...\n", - dev->name); - iowrite32(TX_RING_ELEM_DMA(sp, dirty_tx % TX_RING_SIZE]), - ioaddr + SCBPointer); - iowrite16(CUStart, ioaddr + SCBCmd); - reset_mii(dev); - } else { -#else - { -#endif - del_timer_sync(&sp->timer); - /* Reset the Tx and Rx units. */ - iowrite32(PortReset, ioaddr + SCBPort); - /* We may get spurious interrupts here. But I don't think that they - may do much harm. 1999/12/09 SAW */ - udelay(10); - /* Disable interrupts. */ - iowrite16(SCBMaskAll, ioaddr + SCBCmd); - synchronize_irq(dev->irq); - speedo_tx_buffer_gc(dev); - /* Free as much as possible. - It helps to recover from a hang because of out-of-memory. - It also simplifies speedo_resume() in case TX ring is full or - close-to-be full. */ - speedo_purge_tx(dev); - speedo_refill_rx_buffers(dev, 1); - spin_lock_irqsave(&sp->lock, flags); - speedo_resume(dev); - sp->rx_mode = -1; - dev->trans_start = jiffies; - spin_unlock_irqrestore(&sp->lock, flags); - set_rx_mode(dev); /* it takes the spinlock itself --SAW */ - /* Reset MII transceiver. Do it before starting the timer to serialize - mdio_xxx operations. Yes, it's a paranoya :-) 2000/05/09 SAW */ - reset_mii(dev); - sp->timer.expires = RUN_AT(2*HZ); - add_timer(&sp->timer); - } - return; -} - -static int -speedo_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - void __iomem *ioaddr = sp->regs; - int entry; - - /* Prevent interrupts from changing the Tx ring from underneath us. */ - unsigned long flags; - - spin_lock_irqsave(&sp->lock, flags); - - /* Check if there are enough space. */ - if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) { - printk(KERN_ERR "%s: incorrect tbusy state, fixed.\n", dev->name); - netif_stop_queue(dev); - sp->tx_full = 1; - spin_unlock_irqrestore(&sp->lock, flags); - return 1; - } - - /* Calculate the Tx descriptor entry. */ - entry = sp->cur_tx++ % TX_RING_SIZE; - - sp->tx_skbuff[entry] = skb; - sp->tx_ring[entry].status = - cpu_to_le32(CmdSuspend | CmdTx | CmdTxFlex); - if (!(entry & ((TX_RING_SIZE>>2)-1))) - sp->tx_ring[entry].status |= cpu_to_le32(CmdIntr); - sp->tx_ring[entry].link = - cpu_to_le32(TX_RING_ELEM_DMA(sp, sp->cur_tx % TX_RING_SIZE)); - sp->tx_ring[entry].tx_desc_addr = - cpu_to_le32(TX_RING_ELEM_DMA(sp, entry) + TX_DESCR_BUF_OFFSET); - /* The data region is always in one buffer descriptor. */ - sp->tx_ring[entry].count = cpu_to_le32(sp->tx_threshold); - sp->tx_ring[entry].tx_buf_addr0 = - cpu_to_le32(pci_map_single(sp->pdev, skb->data, - skb->len, PCI_DMA_TODEVICE)); - sp->tx_ring[entry].tx_buf_size0 = cpu_to_le32(skb->len); - - /* workaround for hardware bug on 10 mbit half duplex */ - - if ((sp->partner == 0) && (sp->chip_id == 1)) { - wait_for_cmd_done(dev, sp); - iowrite8(0 , ioaddr + SCBCmd); - udelay(1); - } - - /* Trigger the command unit resume. */ - wait_for_cmd_done(dev, sp); - clear_suspend(sp->last_cmd); - /* We want the time window between clearing suspend flag on the previous - command and resuming CU to be as small as possible. - Interrupts in between are very undesired. --SAW */ - iowrite8(CUResume, ioaddr + SCBCmd); - sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry]; - - /* Leave room for set_rx_mode(). If there is no more space than reserved - for multicast filter mark the ring as full. */ - if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) { - netif_stop_queue(dev); - sp->tx_full = 1; - } - - spin_unlock_irqrestore(&sp->lock, flags); - - dev->trans_start = jiffies; - - return 0; -} - -static void speedo_tx_buffer_gc(struct net_device *dev) -{ - unsigned int dirty_tx; - struct speedo_private *sp = netdev_priv(dev); - - dirty_tx = sp->dirty_tx; - while ((int)(sp->cur_tx - dirty_tx) > 0) { - int entry = dirty_tx % TX_RING_SIZE; - int status = le32_to_cpu(sp->tx_ring[entry].status); - - if (netif_msg_tx_done(sp)) - printk(KERN_DEBUG " scavenge candidate %d status %4.4x.\n", - entry, status); - if ((status & StatusComplete) == 0) - break; /* It still hasn't been processed. */ - if (status & TxUnderrun) - if (sp->tx_threshold < 0x01e08000) { - if (netif_msg_tx_err(sp)) - printk(KERN_DEBUG "%s: TX underrun, threshold adjusted.\n", - dev->name); - sp->tx_threshold += 0x00040000; - } - /* Free the original skb. */ - if (sp->tx_skbuff[entry]) { - sp->stats.tx_packets++; /* Count only user packets. */ - sp->stats.tx_bytes += sp->tx_skbuff[entry]->len; - pci_unmap_single(sp->pdev, - le32_to_cpu(sp->tx_ring[entry].tx_buf_addr0), - sp->tx_skbuff[entry]->len, PCI_DMA_TODEVICE); - dev_kfree_skb_irq(sp->tx_skbuff[entry]); - sp->tx_skbuff[entry] = NULL; - } - dirty_tx++; - } - - if (netif_msg_tx_err(sp) && (int)(sp->cur_tx - dirty_tx) > TX_RING_SIZE) { - printk(KERN_ERR "out-of-sync dirty pointer, %d vs. %d," - " full=%d.\n", - dirty_tx, sp->cur_tx, sp->tx_full); - dirty_tx += TX_RING_SIZE; - } - - while (sp->mc_setup_head != NULL - && (int)(dirty_tx - sp->mc_setup_head->tx - 1) > 0) { - struct speedo_mc_block *t; - if (netif_msg_tx_err(sp)) - printk(KERN_DEBUG "%s: freeing mc frame.\n", dev->name); - pci_unmap_single(sp->pdev, sp->mc_setup_head->frame_dma, - sp->mc_setup_head->len, PCI_DMA_TODEVICE); - t = sp->mc_setup_head->next; - kfree(sp->mc_setup_head); - sp->mc_setup_head = t; - } - if (sp->mc_setup_head == NULL) - sp->mc_setup_tail = NULL; - - sp->dirty_tx = dirty_tx; -} - -/* The interrupt handler does all of the Rx thread work and cleans up - after the Tx thread. */ -static irqreturn_t speedo_interrupt(int irq, void *dev_instance) -{ - struct net_device *dev = (struct net_device *)dev_instance; - struct speedo_private *sp; - void __iomem *ioaddr; - long boguscnt = max_interrupt_work; - unsigned short status; - unsigned int handled = 0; - - sp = netdev_priv(dev); - ioaddr = sp->regs; - -#ifndef final_version - /* A lock to prevent simultaneous entry on SMP machines. */ - if (test_and_set_bit(0, (void*)&sp->in_interrupt)) { - printk(KERN_ERR"%s: SMP simultaneous entry of an interrupt handler.\n", - dev->name); - sp->in_interrupt = 0; /* Avoid halting machine. */ - return IRQ_NONE; - } -#endif - - do { - status = ioread16(ioaddr + SCBStatus); - /* Acknowledge all of the current interrupt sources ASAP. */ - /* Will change from 0xfc00 to 0xff00 when we start handling - FCP and ER interrupts --Dragan */ - iowrite16(status & 0xfc00, ioaddr + SCBStatus); - - if (netif_msg_intr(sp)) - printk(KERN_DEBUG "%s: interrupt status=%#4.4x.\n", - dev->name, status); - - if ((status & 0xfc00) == 0) - break; - handled = 1; - - - if ((status & 0x5000) || /* Packet received, or Rx error. */ - (sp->rx_ring_state&(RrNoMem|RrPostponed)) == RrPostponed) - /* Need to gather the postponed packet. */ - speedo_rx(dev); - - /* Always check if all rx buffers are allocated. --SAW */ - speedo_refill_rx_buffers(dev, 0); - - spin_lock(&sp->lock); - /* - * The chip may have suspended reception for various reasons. - * Check for that, and re-prime it should this be the case. - */ - switch ((status >> 2) & 0xf) { - case 0: /* Idle */ - break; - case 1: /* Suspended */ - case 2: /* No resources (RxFDs) */ - case 9: /* Suspended with no more RBDs */ - case 10: /* No resources due to no RBDs */ - case 12: /* Ready with no RBDs */ - speedo_rx_soft_reset(dev); - break; - case 3: case 5: case 6: case 7: case 8: - case 11: case 13: case 14: case 15: - /* these are all reserved values */ - break; - } - - - /* User interrupt, Command/Tx unit interrupt or CU not active. */ - if (status & 0xA400) { - speedo_tx_buffer_gc(dev); - if (sp->tx_full - && (int)(sp->cur_tx - sp->dirty_tx) < TX_QUEUE_UNFULL) { - /* The ring is no longer full. */ - sp->tx_full = 0; - netif_wake_queue(dev); /* Attention: under a spinlock. --SAW */ - } - } - - spin_unlock(&sp->lock); - - if (--boguscnt < 0) { - printk(KERN_ERR "%s: Too much work at interrupt, status=0x%4.4x.\n", - dev->name, status); - /* Clear all interrupt sources. */ - /* Will change from 0xfc00 to 0xff00 when we start handling - FCP and ER interrupts --Dragan */ - iowrite16(0xfc00, ioaddr + SCBStatus); - break; - } - } while (1); - - if (netif_msg_intr(sp)) - printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", - dev->name, ioread16(ioaddr + SCBStatus)); - - clear_bit(0, (void*)&sp->in_interrupt); - return IRQ_RETVAL(handled); -} - -static inline struct RxFD *speedo_rx_alloc(struct net_device *dev, int entry) -{ - struct speedo_private *sp = netdev_priv(dev); - struct RxFD *rxf; - struct sk_buff *skb; - /* Get a fresh skbuff to replace the consumed one. */ - skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD)); - if (skb) - rx_align(skb); /* Align IP on 16 byte boundary */ - sp->rx_skbuff[entry] = skb; - if (skb == NULL) { - sp->rx_ringp[entry] = NULL; - return NULL; - } - rxf = sp->rx_ringp[entry] = (struct RxFD *)skb->data; - sp->rx_ring_dma[entry] = - pci_map_single(sp->pdev, rxf, - PKT_BUF_SZ + sizeof(struct RxFD), PCI_DMA_FROMDEVICE); - skb->dev = dev; - skb_reserve(skb, sizeof(struct RxFD)); - rxf->rx_buf_addr = cpu_to_le32(0xffffffff); - pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[entry], - sizeof(struct RxFD), PCI_DMA_TODEVICE); - return rxf; -} - -static inline void speedo_rx_link(struct net_device *dev, int entry, - struct RxFD *rxf, dma_addr_t rxf_dma) -{ - struct speedo_private *sp = netdev_priv(dev); - rxf->status = cpu_to_le32(0xC0000001); /* '1' for driver use only. */ - rxf->link = 0; /* None yet. */ - rxf->count = cpu_to_le32(PKT_BUF_SZ << 16); - sp->last_rxf->link = cpu_to_le32(rxf_dma); - sp->last_rxf->status &= cpu_to_le32(~0xC0000000); - pci_dma_sync_single_for_device(sp->pdev, sp->last_rxf_dma, - sizeof(struct RxFD), PCI_DMA_TODEVICE); - sp->last_rxf = rxf; - sp->last_rxf_dma = rxf_dma; -} - -static int speedo_refill_rx_buf(struct net_device *dev, int force) -{ - struct speedo_private *sp = netdev_priv(dev); - int entry; - struct RxFD *rxf; - - entry = sp->dirty_rx % RX_RING_SIZE; - if (sp->rx_skbuff[entry] == NULL) { - rxf = speedo_rx_alloc(dev, entry); - if (rxf == NULL) { - unsigned int forw; - int forw_entry; - if (netif_msg_rx_err(sp) || !(sp->rx_ring_state & RrOOMReported)) { - printk(KERN_WARNING "%s: can't fill rx buffer (force %d)!\n", - dev->name, force); - sp->rx_ring_state |= RrOOMReported; - } - speedo_show_state(dev); - if (!force) - return -1; /* Better luck next time! */ - /* Borrow an skb from one of next entries. */ - for (forw = sp->dirty_rx + 1; forw != sp->cur_rx; forw++) - if (sp->rx_skbuff[forw % RX_RING_SIZE] != NULL) - break; - if (forw == sp->cur_rx) - return -1; - forw_entry = forw % RX_RING_SIZE; - sp->rx_skbuff[entry] = sp->rx_skbuff[forw_entry]; - sp->rx_skbuff[forw_entry] = NULL; - rxf = sp->rx_ringp[forw_entry]; - sp->rx_ringp[forw_entry] = NULL; - sp->rx_ringp[entry] = rxf; - } - } else { - rxf = sp->rx_ringp[entry]; - } - speedo_rx_link(dev, entry, rxf, sp->rx_ring_dma[entry]); - sp->dirty_rx++; - sp->rx_ring_state &= ~(RrNoMem|RrOOMReported); /* Mark the progress. */ - return 0; -} - -static void speedo_refill_rx_buffers(struct net_device *dev, int force) -{ - struct speedo_private *sp = netdev_priv(dev); - - /* Refill the RX ring. */ - while ((int)(sp->cur_rx - sp->dirty_rx) > 0 && - speedo_refill_rx_buf(dev, force) != -1); -} - -static int -speedo_rx(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - int entry = sp->cur_rx % RX_RING_SIZE; - int rx_work_limit = sp->dirty_rx + RX_RING_SIZE - sp->cur_rx; - int alloc_ok = 1; - int npkts = 0; - - if (netif_msg_intr(sp)) - printk(KERN_DEBUG " In speedo_rx().\n"); - /* If we own the next entry, it's a new packet. Send it up. */ - while (sp->rx_ringp[entry] != NULL) { - int status; - int pkt_len; - - pci_dma_sync_single_for_cpu(sp->pdev, sp->rx_ring_dma[entry], - sizeof(struct RxFD), PCI_DMA_FROMDEVICE); - status = le32_to_cpu(sp->rx_ringp[entry]->status); - pkt_len = le32_to_cpu(sp->rx_ringp[entry]->count) & 0x3fff; - - if (!(status & RxComplete)) - break; - - if (--rx_work_limit < 0) - break; - - /* Check for a rare out-of-memory case: the current buffer is - the last buffer allocated in the RX ring. --SAW */ - if (sp->last_rxf == sp->rx_ringp[entry]) { - /* Postpone the packet. It'll be reaped at an interrupt when this - packet is no longer the last packet in the ring. */ - if (netif_msg_rx_err(sp)) - printk(KERN_DEBUG "%s: RX packet postponed!\n", - dev->name); - sp->rx_ring_state |= RrPostponed; - break; - } - - if (netif_msg_rx_status(sp)) - printk(KERN_DEBUG " speedo_rx() status %8.8x len %d.\n", status, - pkt_len); - if ((status & (RxErrTooBig|RxOK|0x0f90)) != RxOK) { - if (status & RxErrTooBig) - printk(KERN_ERR "%s: Ethernet frame overran the Rx buffer, " - "status %8.8x!\n", dev->name, status); - else if (! (status & RxOK)) { - /* There was a fatal error. This *should* be impossible. */ - sp->stats.rx_errors++; - printk(KERN_ERR "%s: Anomalous event in speedo_rx(), " - "status %8.8x.\n", - dev->name, status); - } - } else { - struct sk_buff *skb; - - /* Check if the packet is long enough to just accept without - copying to a properly sized skbuff. */ - if (pkt_len < rx_copybreak - && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { - skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ - /* 'skb_put()' points to the start of sk_buff data area. */ - pci_dma_sync_single_for_cpu(sp->pdev, sp->rx_ring_dma[entry], - sizeof(struct RxFD) + pkt_len, - PCI_DMA_FROMDEVICE); - -#if 1 || USE_IP_CSUM - /* Packet is in one chunk -- we can copy + cksum. */ - skb_copy_to_linear_data(skb, sp->rx_skbuff[entry]->data, pkt_len); - skb_put(skb, pkt_len); -#else - skb_copy_from_linear_data(sp->rx_skbuff[entry], - skb_put(skb, pkt_len), - pkt_len); -#endif - pci_dma_sync_single_for_device(sp->pdev, sp->rx_ring_dma[entry], - sizeof(struct RxFD) + pkt_len, - PCI_DMA_FROMDEVICE); - npkts++; - } else { - /* Pass up the already-filled skbuff. */ - skb = sp->rx_skbuff[entry]; - if (skb == NULL) { - printk(KERN_ERR "%s: Inconsistent Rx descriptor chain.\n", - dev->name); - break; - } - sp->rx_skbuff[entry] = NULL; - skb_put(skb, pkt_len); - npkts++; - sp->rx_ringp[entry] = NULL; - pci_unmap_single(sp->pdev, sp->rx_ring_dma[entry], - PKT_BUF_SZ + sizeof(struct RxFD), - PCI_DMA_FROMDEVICE); - } - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->last_rx = jiffies; - sp->stats.rx_packets++; - sp->stats.rx_bytes += pkt_len; - } - entry = (++sp->cur_rx) % RX_RING_SIZE; - sp->rx_ring_state &= ~RrPostponed; - /* Refill the recently taken buffers. - Do it one-by-one to handle traffic bursts better. */ - if (alloc_ok && speedo_refill_rx_buf(dev, 0) == -1) - alloc_ok = 0; - } - - /* Try hard to refill the recently taken buffers. */ - speedo_refill_rx_buffers(dev, 1); - - if (npkts) - sp->last_rx_time = jiffies; - - return 0; -} - -static int -speedo_close(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - void __iomem *ioaddr = sp->regs; - int i; - - netdevice_stop(dev); - netif_stop_queue(dev); - - if (netif_msg_ifdown(sp)) - printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n", - dev->name, ioread16(ioaddr + SCBStatus)); - - /* Shut off the media monitoring timer. */ - del_timer_sync(&sp->timer); - - iowrite16(SCBMaskAll, ioaddr + SCBCmd); - - /* Shutting down the chip nicely fails to disable flow control. So.. */ - iowrite32(PortPartialReset, ioaddr + SCBPort); - ioread32(ioaddr + SCBPort); /* flush posted write */ - /* - * The chip requires a 10 microsecond quiet period. Wait here! - */ - udelay(10); - - free_irq(dev->irq, dev); - speedo_show_state(dev); - - /* Free all the skbuffs in the Rx and Tx queues. */ - for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb = sp->rx_skbuff[i]; - sp->rx_skbuff[i] = NULL; - /* Clear the Rx descriptors. */ - if (skb) { - pci_unmap_single(sp->pdev, - sp->rx_ring_dma[i], - PKT_BUF_SZ + sizeof(struct RxFD), PCI_DMA_FROMDEVICE); - dev_kfree_skb(skb); - } - } - - for (i = 0; i < TX_RING_SIZE; i++) { - struct sk_buff *skb = sp->tx_skbuff[i]; - sp->tx_skbuff[i] = NULL; - /* Clear the Tx descriptors. */ - if (skb) { - pci_unmap_single(sp->pdev, - le32_to_cpu(sp->tx_ring[i].tx_buf_addr0), - skb->len, PCI_DMA_TODEVICE); - dev_kfree_skb(skb); - } - } - - /* Free multicast setting blocks. */ - for (i = 0; sp->mc_setup_head != NULL; i++) { - struct speedo_mc_block *t; - t = sp->mc_setup_head->next; - kfree(sp->mc_setup_head); - sp->mc_setup_head = t; - } - sp->mc_setup_tail = NULL; - if (netif_msg_ifdown(sp)) - printk(KERN_DEBUG "%s: %d multicast blocks dropped.\n", dev->name, i); - - pci_set_power_state(sp->pdev, PCI_D2); - - return 0; -} - -/* The Speedo-3 has an especially awkward and unusable method of getting - statistics out of the chip. It takes an unpredictable length of time - for the dump-stats command to complete. To avoid a busy-wait loop we - update the stats with the previous dump results, and then trigger a - new dump. - - Oh, and incoming frames are dropped while executing dump-stats! - */ -static struct net_device_stats * -speedo_get_stats(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - void __iomem *ioaddr = sp->regs; - - /* Update only if the previous dump finished. */ - if (sp->lstats->done_marker == cpu_to_le32(0xA007)) { - sp->stats.tx_aborted_errors += le32_to_cpu(sp->lstats->tx_coll16_errs); - sp->stats.tx_window_errors += le32_to_cpu(sp->lstats->tx_late_colls); - sp->stats.tx_fifo_errors += le32_to_cpu(sp->lstats->tx_underruns); - sp->stats.tx_fifo_errors += le32_to_cpu(sp->lstats->tx_lost_carrier); - /*sp->stats.tx_deferred += le32_to_cpu(sp->lstats->tx_deferred);*/ - sp->stats.collisions += le32_to_cpu(sp->lstats->tx_total_colls); - sp->stats.rx_crc_errors += le32_to_cpu(sp->lstats->rx_crc_errs); - sp->stats.rx_frame_errors += le32_to_cpu(sp->lstats->rx_align_errs); - sp->stats.rx_over_errors += le32_to_cpu(sp->lstats->rx_resource_errs); - sp->stats.rx_fifo_errors += le32_to_cpu(sp->lstats->rx_overrun_errs); - sp->stats.rx_length_errors += le32_to_cpu(sp->lstats->rx_runt_errs); - sp->lstats->done_marker = 0x0000; - if (netif_running(dev)) { - unsigned long flags; - /* Take a spinlock to make wait_for_cmd_done and sending the - command atomic. --SAW */ - spin_lock_irqsave(&sp->lock, flags); - wait_for_cmd_done(dev, sp); - iowrite8(CUDumpStats, ioaddr + SCBCmd); - spin_unlock_irqrestore(&sp->lock, flags); - } - } - return &sp->stats; -} - -static void speedo_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - struct speedo_private *sp = netdev_priv(dev); - strncpy(info->driver, "eepro100", sizeof(info->driver)-1); - strncpy(info->version, version, sizeof(info->version)-1); - if (sp->pdev) - strcpy(info->bus_info, pci_name(sp->pdev)); -} - -static int speedo_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct speedo_private *sp = netdev_priv(dev); - spin_lock_irq(&sp->lock); - mii_ethtool_gset(&sp->mii_if, ecmd); - spin_unlock_irq(&sp->lock); - return 0; -} - -static int speedo_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct speedo_private *sp = netdev_priv(dev); - int res; - spin_lock_irq(&sp->lock); - res = mii_ethtool_sset(&sp->mii_if, ecmd); - spin_unlock_irq(&sp->lock); - return res; -} - -static int speedo_nway_reset(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - return mii_nway_restart(&sp->mii_if); -} - -static u32 speedo_get_link(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - return mii_link_ok(&sp->mii_if); -} - -static u32 speedo_get_msglevel(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - return sp->msg_enable; -} - -static void speedo_set_msglevel(struct net_device *dev, u32 v) -{ - struct speedo_private *sp = netdev_priv(dev); - sp->msg_enable = v; -} - -static const struct ethtool_ops ethtool_ops = { - .get_drvinfo = speedo_get_drvinfo, - .get_settings = speedo_get_settings, - .set_settings = speedo_set_settings, - .nway_reset = speedo_nway_reset, - .get_link = speedo_get_link, - .get_msglevel = speedo_get_msglevel, - .set_msglevel = speedo_set_msglevel, -}; - -static int speedo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct speedo_private *sp = netdev_priv(dev); - struct mii_ioctl_data *data = if_mii(rq); - int phy = sp->phy[0] & 0x1f; - int saved_acpi; - int t; - - switch(cmd) { - case SIOCGMIIPHY: /* Get address of MII PHY in use. */ - data->phy_id = phy; - - case SIOCGMIIREG: /* Read MII PHY register. */ - /* FIXME: these operations need to be serialized with MDIO - access from the timeout handler. - They are currently serialized only with MDIO access from the - timer routine. 2000/05/09 SAW */ - saved_acpi = pci_set_power_state(sp->pdev, PCI_D0); - t = del_timer_sync(&sp->timer); - data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f); - if (t) - add_timer(&sp->timer); /* may be set to the past --SAW */ - pci_set_power_state(sp->pdev, saved_acpi); - return 0; - - case SIOCSMIIREG: /* Write MII PHY register. */ - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - saved_acpi = pci_set_power_state(sp->pdev, PCI_D0); - t = del_timer_sync(&sp->timer); - mdio_write(dev, data->phy_id, data->reg_num, data->val_in); - if (t) - add_timer(&sp->timer); /* may be set to the past --SAW */ - pci_set_power_state(sp->pdev, saved_acpi); - return 0; - default: - return -EOPNOTSUPP; - } -} - -/* Set or clear the multicast filter for this adaptor. - This is very ugly with Intel chips -- we usually have to execute an - entire configuration command, plus process a multicast command. - This is complicated. We must put a large configuration command and - an arbitrarily-sized multicast command in the transmit list. - To minimize the disruption -- the previous command might have already - loaded the link -- we convert the current command block, normally a Tx - command, into a no-op and link it to the new command. -*/ -static void set_rx_mode(struct net_device *dev) -{ - struct speedo_private *sp = netdev_priv(dev); - void __iomem *ioaddr = sp->regs; - struct descriptor *last_cmd; - char new_rx_mode; - unsigned long flags; - int entry, i; - - if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - new_rx_mode = 3; - } else if ((dev->flags & IFF_ALLMULTI) || - dev->mc_count > multicast_filter_limit) { - new_rx_mode = 1; - } else - new_rx_mode = 0; - - if (netif_msg_rx_status(sp)) - printk(KERN_DEBUG "%s: set_rx_mode %d -> %d\n", dev->name, - sp->rx_mode, new_rx_mode); - - if ((int)(sp->cur_tx - sp->dirty_tx) > TX_RING_SIZE - TX_MULTICAST_SIZE) { - /* The Tx ring is full -- don't add anything! Hope the mode will be - * set again later. */ - sp->rx_mode = -1; - return; - } - - if (new_rx_mode != sp->rx_mode) { - u8 *config_cmd_data; - - spin_lock_irqsave(&sp->lock, flags); - entry = sp->cur_tx++ % TX_RING_SIZE; - last_cmd = sp->last_cmd; - sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry]; - - sp->tx_skbuff[entry] = NULL; /* Redundant. */ - sp->tx_ring[entry].status = cpu_to_le32(CmdSuspend | CmdConfigure); - sp->tx_ring[entry].link = - cpu_to_le32(TX_RING_ELEM_DMA(sp, (entry + 1) % TX_RING_SIZE)); - config_cmd_data = (void *)&sp->tx_ring[entry].tx_desc_addr; - /* Construct a full CmdConfig frame. */ - memcpy(config_cmd_data, i82558_config_cmd, CONFIG_DATA_SIZE); - config_cmd_data[1] = (txfifo << 4) | rxfifo; - config_cmd_data[4] = rxdmacount; - config_cmd_data[5] = txdmacount + 0x80; - config_cmd_data[15] |= (new_rx_mode & 2) ? 1 : 0; - /* 0x80 doesn't disable FC 0x84 does. - Disable Flow control since we are not ACK-ing any FC interrupts - for now. --Dragan */ - config_cmd_data[19] = 0x84; - config_cmd_data[19] |= sp->mii_if.full_duplex ? 0x40 : 0; - config_cmd_data[21] = (new_rx_mode & 1) ? 0x0D : 0x05; - if (sp->phy[0] & 0x8000) { /* Use the AUI port instead. */ - config_cmd_data[15] |= 0x80; - config_cmd_data[8] = 0; - } - /* Trigger the command unit resume. */ - wait_for_cmd_done(dev, sp); - clear_suspend(last_cmd); - iowrite8(CUResume, ioaddr + SCBCmd); - if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) { - netif_stop_queue(dev); - sp->tx_full = 1; - } - spin_unlock_irqrestore(&sp->lock, flags); - } - - if (new_rx_mode == 0 && dev->mc_count < 4) { - /* The simple case of 0-3 multicast list entries occurs often, and - fits within one tx_ring[] entry. */ - struct dev_mc_list *mclist; - __le16 *setup_params, *eaddrs; - - spin_lock_irqsave(&sp->lock, flags); - entry = sp->cur_tx++ % TX_RING_SIZE; - last_cmd = sp->last_cmd; - sp->last_cmd = (struct descriptor *)&sp->tx_ring[entry]; - - sp->tx_skbuff[entry] = NULL; - sp->tx_ring[entry].status = cpu_to_le32(CmdSuspend | CmdMulticastList); - sp->tx_ring[entry].link = - cpu_to_le32(TX_RING_ELEM_DMA(sp, (entry + 1) % TX_RING_SIZE)); - sp->tx_ring[entry].tx_desc_addr = 0; /* Really MC list count. */ - setup_params = (__le16 *)&sp->tx_ring[entry].tx_desc_addr; - *setup_params++ = cpu_to_le16(dev->mc_count*6); - /* Fill in the multicast addresses. */ - for (i = 0, mclist = dev->mc_list; i < dev->mc_count; - i++, mclist = mclist->next) { - eaddrs = (__le16 *)mclist->dmi_addr; - *setup_params++ = *eaddrs++; - *setup_params++ = *eaddrs++; - *setup_params++ = *eaddrs++; - } - - wait_for_cmd_done(dev, sp); - clear_suspend(last_cmd); - /* Immediately trigger the command unit resume. */ - iowrite8(CUResume, ioaddr + SCBCmd); - - if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) { - netif_stop_queue(dev); - sp->tx_full = 1; - } - spin_unlock_irqrestore(&sp->lock, flags); - } else if (new_rx_mode == 0) { - struct dev_mc_list *mclist; - __le16 *setup_params, *eaddrs; - struct speedo_mc_block *mc_blk; - struct descriptor *mc_setup_frm; - int i; - - mc_blk = kmalloc(sizeof(*mc_blk) + 2 + multicast_filter_limit*6, - GFP_ATOMIC); - if (mc_blk == NULL) { - printk(KERN_ERR "%s: Failed to allocate a setup frame.\n", - dev->name); - sp->rx_mode = -1; /* We failed, try again. */ - return; - } - mc_blk->next = NULL; - mc_blk->len = 2 + multicast_filter_limit*6; - mc_blk->frame_dma = - pci_map_single(sp->pdev, &mc_blk->frame, mc_blk->len, - PCI_DMA_TODEVICE); - mc_setup_frm = &mc_blk->frame; - - /* Fill the setup frame. */ - if (netif_msg_ifup(sp)) - printk(KERN_DEBUG "%s: Constructing a setup frame at %p.\n", - dev->name, mc_setup_frm); - mc_setup_frm->cmd_status = - cpu_to_le32(CmdSuspend | CmdIntr | CmdMulticastList); - /* Link set below. */ - setup_params = (__le16 *)&mc_setup_frm->params; - *setup_params++ = cpu_to_le16(dev->mc_count*6); - /* Fill in the multicast addresses. */ - for (i = 0, mclist = dev->mc_list; i < dev->mc_count; - i++, mclist = mclist->next) { - eaddrs = (__le16 *)mclist->dmi_addr; - *setup_params++ = *eaddrs++; - *setup_params++ = *eaddrs++; - *setup_params++ = *eaddrs++; - } - - /* Disable interrupts while playing with the Tx Cmd list. */ - spin_lock_irqsave(&sp->lock, flags); - - if (sp->mc_setup_tail) - sp->mc_setup_tail->next = mc_blk; - else - sp->mc_setup_head = mc_blk; - sp->mc_setup_tail = mc_blk; - mc_blk->tx = sp->cur_tx; - - entry = sp->cur_tx++ % TX_RING_SIZE; - last_cmd = sp->last_cmd; - sp->last_cmd = mc_setup_frm; - - /* Change the command to a NoOp, pointing to the CmdMulti command. */ - sp->tx_skbuff[entry] = NULL; - sp->tx_ring[entry].status = cpu_to_le32(CmdNOp); - sp->tx_ring[entry].link = cpu_to_le32(mc_blk->frame_dma); - - /* Set the link in the setup frame. */ - mc_setup_frm->link = - cpu_to_le32(TX_RING_ELEM_DMA(sp, (entry + 1) % TX_RING_SIZE)); - - pci_dma_sync_single_for_device(sp->pdev, mc_blk->frame_dma, - mc_blk->len, PCI_DMA_TODEVICE); - - wait_for_cmd_done(dev, sp); - clear_suspend(last_cmd); - /* Immediately trigger the command unit resume. */ - iowrite8(CUResume, ioaddr + SCBCmd); - - if ((int)(sp->cur_tx - sp->dirty_tx) >= TX_QUEUE_LIMIT) { - netif_stop_queue(dev); - sp->tx_full = 1; - } - spin_unlock_irqrestore(&sp->lock, flags); - - if (netif_msg_rx_status(sp)) - printk(" CmdMCSetup frame length %d in entry %d.\n", - dev->mc_count, entry); - } - - sp->rx_mode = new_rx_mode; -} - -#ifdef CONFIG_PM -static int eepro100_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata (pdev); - struct speedo_private *sp = netdev_priv(dev); - void __iomem *ioaddr = sp->regs; - - pci_save_state(pdev); - - if (!netif_running(dev)) - return 0; - - del_timer_sync(&sp->timer); - - netif_device_detach(dev); - iowrite32(PortPartialReset, ioaddr + SCBPort); - - /* XXX call pci_set_power_state ()? */ - pci_disable_device(pdev); - pci_set_power_state (pdev, PCI_D3hot); - return 0; -} - -static int eepro100_resume(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata (pdev); - struct speedo_private *sp = netdev_priv(dev); - void __iomem *ioaddr = sp->regs; - int rc; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - pci_set_master(pdev); - - if (!netif_running(dev)) - return 0; - - /* I'm absolutely uncertain if this part of code may work. - The problems are: - - correct hardware reinitialization; - - correct driver behavior between different steps of the - reinitialization; - - serialization with other driver calls. - 2000/03/08 SAW */ - iowrite16(SCBMaskAll, ioaddr + SCBCmd); - speedo_resume(dev); - netif_device_attach(dev); - sp->rx_mode = -1; - sp->flow_ctrl = sp->partner = 0; - set_rx_mode(dev); - sp->timer.expires = RUN_AT(2*HZ); - add_timer(&sp->timer); - return 0; -} -#endif /* CONFIG_PM */ - -static void __devexit eepro100_remove_one (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata (pdev); - struct speedo_private *sp = netdev_priv(dev); - - unregister_netdev(dev); - - release_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1)); - release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); - - pci_iounmap(pdev, sp->regs); - pci_free_consistent(pdev, TX_RING_SIZE * sizeof(struct TxFD) - + sizeof(struct speedo_stats), - sp->tx_ring, sp->tx_ring_dma); - pci_disable_device(pdev); - free_netdev(dev); -} - -static struct pci_device_id eepro100_pci_tbl[] = { - { PCI_VENDOR_ID_INTEL, 0x1229, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1209, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1029, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1030, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1031, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1032, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1033, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1034, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1035, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1036, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1037, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1038, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1039, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x103A, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x103B, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x103C, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x103D, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x103E, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1050, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1059, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x1227, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x2449, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x2459, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x245D, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x5200, PCI_ANY_ID, PCI_ANY_ID, }, - { PCI_VENDOR_ID_INTEL, 0x5201, PCI_ANY_ID, PCI_ANY_ID, }, - { 0,} -}; -MODULE_DEVICE_TABLE(pci, eepro100_pci_tbl); - -static struct pci_driver eepro100_driver = { - .name = "eepro100", - .id_table = eepro100_pci_tbl, - .probe = eepro100_init_one, - .remove = __devexit_p(eepro100_remove_one), -#ifdef CONFIG_PM - .suspend = eepro100_suspend, - .resume = eepro100_resume, -#endif /* CONFIG_PM */ -}; - -static int __init eepro100_init_module(void) -{ -#ifdef MODULE - printk(version); -#endif - return pci_register_driver(&eepro100_driver); -} - -static void __exit eepro100_cleanup_module(void) -{ - pci_unregister_driver(&eepro100_driver); -} - -module_init(eepro100_init_module); -module_exit(eepro100_cleanup_module); - -/* - * Local variables: - * compile-command: "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c eepro100.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`" - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * End: - */ -- cgit v1.2.3 From d003922dab6a66027344a787e9846ecf35a706a8 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Thu, 9 Oct 2008 21:49:33 -0300 Subject: rfkill: add master_switch_mode and EPO lock to rfkill and rfkill-input Add of software-based sanity to rfkill and rfkill-input so that it can reproduce what hardware-based EPO switches do, blocking all transmitters and locking down any further attempts to unblock them until the switch is deactivated. rfkill-input is responsible for issuing the EPO control requests, like before. While an rfkill EPO is active, all transmitters are locked to one of the BLOCKED states and all attempts to change that through the rfkill API (userspace and kernel) will be either ignored or return -EPERM errors. The lock will be released upon receipt of EV_SW SW_RFKILL_ALL ON by rfkill-input, or should modular rfkill-input be unloaded. This makes rfkill and rfkill-input extend the operation of an existing wireless master kill switch to all wireless devices in the system, even those that are not under hardware or firmware control. Since the above is the expected operational behavior for the master rfkill switch, the EPO lock functionality is not optional. Also, extend rfkill-input to allow for three different behaviors when it receives an EV_SW SW_RFKILL_ALL ON input event. The user can set which behavior he wants through the master_switch_mode parameter: master_switch_mode = 0: EV_SW SW_RFKILL_ALL ON just unlocks rfkill controller state changes (so that the rfkill userspace and kernel APIs can now be used to change rfkill controller states again), but doesn't change any of their states (so they will all remain blocked). This is the safest mode of operation, as it requires explicit operator action to re-enable a transmitter. master_switch_mode = 1: EV_SW SW_RFKILL_ALL ON causes rfkill-input to attempt to restore the system to the state before the last EV_SW SW_RFKILL_ALL OFF event, or to the default global states if no EV_SW SW_RFKILL_ALL OFF ever happened. This is the recommended mode of operation for laptops. master_switch_mode = 2: tries to unblock all rfkill controllers (i.e. enable all transmitters) when an EV_SW SW_RFKILL_ALL ON event is received. This is the default mode of operation, as it mimics the previous behavior of rfkill-input. In order to implement these features in a clean way, the entire event handling of rfkill-input was refactored into a single worker function. Protection against input event DoS (repeatedly firing rfkill events for rfkill-input to process) was removed during the code refactoring. It will be added back in a future patch. Note that with these changes, rfkill-input doesn't need to explicitly handle any radio types for which KEY_ or SW_ events do not exist yet. Code to handle EV_SW SW_{WLAN,WWAN,BLUETOOTH,WIMAX,...} was added as it might be needed in the future (and its implementation is not that obvious), but is currently #ifdef'd out to avoid wasting resources. Signed-off-by: Henrique de Moraes Holschuh Cc: Ivo van Doorn Cc: Dmitry Torokhov Signed-off-by: John W. Linville --- Documentation/rfkill.txt | 20 +-- net/rfkill/rfkill-input.c | 306 ++++++++++++++++++++++++++++++++++------------ net/rfkill/rfkill-input.h | 2 + net/rfkill/rfkill.c | 46 ++++++- 4 files changed, 287 insertions(+), 87 deletions(-) (limited to 'Documentation') diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index b65f0799df48..4d3ee317a4a3 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -191,12 +191,20 @@ Userspace input handlers (uevents) or kernel input handlers (rfkill-input): to tell the devices registered with the rfkill class to change their state (i.e. translates the input layer event into real action). + * rfkill-input implements EPO by handling EV_SW SW_RFKILL_ALL 0 (power off all transmitters) in a special way: it ignores any overrides and local state cache and forces all transmitters to the RFKILL_STATE_SOFT_BLOCKED state (including those which are already - supposed to be BLOCKED). Note that the opposite event (power on all - transmitters) is handled normally. + supposed to be BLOCKED). + * rfkill EPO will remain active until rfkill-input receives an + EV_SW SW_RFKILL_ALL 1 event. While the EPO is active, transmitters + are locked in the blocked state (rfkill will refuse to unblock them). + * rfkill-input implements different policies that the user can + select for handling EV_SW SW_RFKILL_ALL 1. It will unlock rfkill, + and either do nothing (leave transmitters blocked, but now unlocked), + restore the transmitters to their state before the EPO, or unblock + them all. Userspace uevent handler or kernel platform-specific drivers hooked to the rfkill notifier chain: @@ -331,11 +339,9 @@ class to get a sysfs interface :-) correct event for your switch/button. These events are emergency power-off events when they are trying to turn the transmitters off. An example of an input device which SHOULD generate *_RFKILL_ALL events is the wireless-kill -switch in a laptop which is NOT a hotkey, but a real switch that kills radios -in hardware, even if the O.S. has gone to lunch. An example of an input device -which SHOULD NOT generate *_RFKILL_ALL events by default, is any sort of hot -key that does nothing by itself, as well as any hot key that is type-specific -(e.g. the one for WLAN). +switch in a laptop which is NOT a hotkey, but a real sliding/rocker switch. +An example of an input device which SHOULD NOT generate *_RFKILL_ALL events by +default, is any sort of hot key that is type-specific (e.g. the one for WLAN). 3.1 Guidelines for wireless device drivers diff --git a/net/rfkill/rfkill-input.c b/net/rfkill/rfkill-input.c index bfdade72e066..7706541f9f79 100644 --- a/net/rfkill/rfkill-input.c +++ b/net/rfkill/rfkill-input.c @@ -24,138 +24,291 @@ MODULE_AUTHOR("Dmitry Torokhov "); MODULE_DESCRIPTION("Input layer to RF switch connector"); MODULE_LICENSE("GPL"); +enum rfkill_input_master_mode { + RFKILL_INPUT_MASTER_DONOTHING = 0, + RFKILL_INPUT_MASTER_RESTORE = 1, + RFKILL_INPUT_MASTER_UNBLOCKALL = 2, + RFKILL_INPUT_MASTER_MAX, /* marker */ +}; + +static enum rfkill_input_master_mode rfkill_master_switch_mode = + RFKILL_INPUT_MASTER_UNBLOCKALL; +module_param_named(master_switch_mode, rfkill_master_switch_mode, uint, 0); +MODULE_PARM_DESC(master_switch_mode, + "SW_RFKILL_ALL ON should: 0=do nothing; 1=restore; 2=unblock all"); + +enum rfkill_global_sched_op { + RFKILL_GLOBAL_OP_EPO = 0, + RFKILL_GLOBAL_OP_RESTORE, + RFKILL_GLOBAL_OP_UNLOCK, + RFKILL_GLOBAL_OP_UNBLOCK, +}; + +/* + * Currently, the code marked with RFKILL_NEED_SWSET is inactive. + * If handling of EV_SW SW_WLAN/WWAN/BLUETOOTH/etc is needed in the + * future, when such events are added, that code will be necessary. + */ + struct rfkill_task { struct work_struct work; - enum rfkill_type type; - struct mutex mutex; /* ensures that task is serialized */ - spinlock_t lock; /* for accessing last and desired state */ - unsigned long last; /* last schedule */ - enum rfkill_state desired_state; /* on/off */ + + /* ensures that task is serialized */ + struct mutex mutex; + + /* protects everything below */ + spinlock_t lock; + + /* pending regular switch operations (1=pending) */ + unsigned long sw_pending[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; + +#ifdef RFKILL_NEED_SWSET + /* set operation pending (1=pending) */ + unsigned long sw_setpending[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; + + /* desired state for pending set operation (1=unblock) */ + unsigned long sw_newstate[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; +#endif + + /* should the state be complemented (1=yes) */ + unsigned long sw_togglestate[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; + + bool global_op_pending; + enum rfkill_global_sched_op op; }; -static void rfkill_task_handler(struct work_struct *work) +static void __rfkill_handle_global_op(enum rfkill_global_sched_op op) { - struct rfkill_task *task = container_of(work, struct rfkill_task, work); + unsigned int i; + + switch (op) { + case RFKILL_GLOBAL_OP_EPO: + rfkill_epo(); + break; + case RFKILL_GLOBAL_OP_RESTORE: + rfkill_restore_states(); + break; + case RFKILL_GLOBAL_OP_UNLOCK: + rfkill_remove_epo_lock(); + break; + case RFKILL_GLOBAL_OP_UNBLOCK: + rfkill_remove_epo_lock(); + for (i = 0; i < RFKILL_TYPE_MAX; i++) + rfkill_switch_all(i, RFKILL_STATE_UNBLOCKED); + break; + default: + /* memory corruption or bug, fail safely */ + rfkill_epo(); + WARN(1, "Unknown requested operation %d! " + "rfkill Emergency Power Off activated\n", + op); + } +} - mutex_lock(&task->mutex); +#ifdef RFKILL_NEED_SWSET +static void __rfkill_handle_normal_op(const enum rfkill_type type, + const bool sp, const bool s, const bool c) +{ + enum rfkill_state state; - rfkill_switch_all(task->type, task->desired_state); + if (sp) + state = (s) ? RFKILL_STATE_UNBLOCKED : + RFKILL_STATE_SOFT_BLOCKED; + else + state = rfkill_get_global_state(type); - mutex_unlock(&task->mutex); + if (c) + state = rfkill_state_complement(state); + + rfkill_switch_all(type, state); } +#else +static void __rfkill_handle_normal_op(const enum rfkill_type type, + const bool c) +{ + enum rfkill_state state; + + state = rfkill_get_global_state(type); + if (c) + state = rfkill_state_complement(state); + + rfkill_switch_all(type, state); +} +#endif -static void rfkill_task_epo_handler(struct work_struct *work) +static void rfkill_task_handler(struct work_struct *work) { - rfkill_epo(); + struct rfkill_task *task = + container_of(work, struct rfkill_task, work); + bool doit = true; + + mutex_lock(&task->mutex); + + spin_lock_irq(&task->lock); + while (doit) { + if (task->global_op_pending) { + enum rfkill_global_sched_op op = task->op; + task->global_op_pending = false; + memset(task->sw_pending, 0, sizeof(task->sw_pending)); + spin_unlock_irq(&task->lock); + + __rfkill_handle_global_op(op); + + /* make sure we do at least one pass with + * !task->global_op_pending */ + spin_lock_irq(&task->lock); + continue; + } else if (!rfkill_is_epo_lock_active()) { + unsigned int i = 0; + + while (!task->global_op_pending && + i < RFKILL_TYPE_MAX) { + if (test_and_clear_bit(i, task->sw_pending)) { + bool c; +#ifdef RFKILL_NEED_SWSET + bool sp, s; + sp = test_and_clear_bit(i, + task->sw_setpending); + s = test_bit(i, task->sw_newstate); +#endif + c = test_and_clear_bit(i, + task->sw_togglestate); + spin_unlock_irq(&task->lock); + +#ifdef RFKILL_NEED_SWSET + __rfkill_handle_normal_op(i, sp, s, c); +#else + __rfkill_handle_normal_op(i, c); +#endif + + spin_lock_irq(&task->lock); + } + i++; + } + } + doit = task->global_op_pending; + } + spin_unlock_irq(&task->lock); + + mutex_unlock(&task->mutex); } -static DECLARE_WORK(epo_work, rfkill_task_epo_handler); +static struct rfkill_task rfkill_task = { + .work = __WORK_INITIALIZER(rfkill_task.work, + rfkill_task_handler), + .mutex = __MUTEX_INITIALIZER(rfkill_task.mutex), + .lock = __SPIN_LOCK_UNLOCKED(rfkill_task.lock), +}; -static void rfkill_schedule_epo(void) +static void rfkill_schedule_global_op(enum rfkill_global_sched_op op) { - schedule_work(&epo_work); + unsigned long flags; + + spin_lock_irqsave(&rfkill_task.lock, flags); + rfkill_task.op = op; + rfkill_task.global_op_pending = true; + schedule_work(&rfkill_task.work); + spin_unlock_irqrestore(&rfkill_task.lock, flags); } -static void rfkill_schedule_set(struct rfkill_task *task, +#ifdef RFKILL_NEED_SWSET +/* Use this if you need to add EV_SW SW_WLAN/WWAN/BLUETOOTH/etc handling */ + +static void rfkill_schedule_set(enum rfkill_type type, enum rfkill_state desired_state) { unsigned long flags; - if (unlikely(work_pending(&epo_work))) + if (rfkill_is_epo_lock_active()) return; - spin_lock_irqsave(&task->lock, flags); - - if (time_after(jiffies, task->last + msecs_to_jiffies(200))) { - task->desired_state = desired_state; - task->last = jiffies; - schedule_work(&task->work); + spin_lock_irqsave(&rfkill_task.lock, flags); + if (!rfkill_task.global_op_pending) { + set_bit(type, rfkill_task.sw_pending); + set_bit(type, rfkill_task.sw_setpending); + clear_bit(type, rfkill_task.sw_togglestate); + if (desired_state) + set_bit(type, rfkill_task.sw_newstate); + else + clear_bit(type, rfkill_task.sw_newstate); + schedule_work(&rfkill_task.work); } - - spin_unlock_irqrestore(&task->lock, flags); + spin_unlock_irqrestore(&rfkill_task.lock, flags); } +#endif -static void rfkill_schedule_toggle(struct rfkill_task *task) +static void rfkill_schedule_toggle(enum rfkill_type type) { unsigned long flags; - if (unlikely(work_pending(&epo_work))) + if (rfkill_is_epo_lock_active()) return; - spin_lock_irqsave(&task->lock, flags); - - if (time_after(jiffies, task->last + msecs_to_jiffies(200))) { - task->desired_state = - rfkill_state_complement(task->desired_state); - task->last = jiffies; - schedule_work(&task->work); + spin_lock_irqsave(&rfkill_task.lock, flags); + if (!rfkill_task.global_op_pending) { + set_bit(type, rfkill_task.sw_pending); + change_bit(type, rfkill_task.sw_togglestate); + schedule_work(&rfkill_task.work); } - - spin_unlock_irqrestore(&task->lock, flags); + spin_unlock_irqrestore(&rfkill_task.lock, flags); } -#define DEFINE_RFKILL_TASK(n, t) \ - struct rfkill_task n = { \ - .work = __WORK_INITIALIZER(n.work, \ - rfkill_task_handler), \ - .type = t, \ - .mutex = __MUTEX_INITIALIZER(n.mutex), \ - .lock = __SPIN_LOCK_UNLOCKED(n.lock), \ - .desired_state = RFKILL_STATE_UNBLOCKED, \ - } - -static DEFINE_RFKILL_TASK(rfkill_wlan, RFKILL_TYPE_WLAN); -static DEFINE_RFKILL_TASK(rfkill_bt, RFKILL_TYPE_BLUETOOTH); -static DEFINE_RFKILL_TASK(rfkill_uwb, RFKILL_TYPE_UWB); -static DEFINE_RFKILL_TASK(rfkill_wimax, RFKILL_TYPE_WIMAX); -static DEFINE_RFKILL_TASK(rfkill_wwan, RFKILL_TYPE_WWAN); - static void rfkill_schedule_evsw_rfkillall(int state) { - /* EVERY radio type. state != 0 means radios ON */ - /* handle EPO (emergency power off) through shortcut */ if (state) { - rfkill_schedule_set(&rfkill_wwan, - RFKILL_STATE_UNBLOCKED); - rfkill_schedule_set(&rfkill_wimax, - RFKILL_STATE_UNBLOCKED); - rfkill_schedule_set(&rfkill_uwb, - RFKILL_STATE_UNBLOCKED); - rfkill_schedule_set(&rfkill_bt, - RFKILL_STATE_UNBLOCKED); - rfkill_schedule_set(&rfkill_wlan, - RFKILL_STATE_UNBLOCKED); + switch (rfkill_master_switch_mode) { + case RFKILL_INPUT_MASTER_UNBLOCKALL: + rfkill_schedule_global_op(RFKILL_GLOBAL_OP_UNBLOCK); + break; + case RFKILL_INPUT_MASTER_RESTORE: + rfkill_schedule_global_op(RFKILL_GLOBAL_OP_RESTORE); + break; + case RFKILL_INPUT_MASTER_DONOTHING: + rfkill_schedule_global_op(RFKILL_GLOBAL_OP_UNLOCK); + break; + default: + /* memory corruption or driver bug! fail safely */ + rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO); + WARN(1, "Unknown rfkill_master_switch_mode (%d), " + "driver bug or memory corruption detected!\n", + rfkill_master_switch_mode); + break; + } } else - rfkill_schedule_epo(); + rfkill_schedule_global_op(RFKILL_GLOBAL_OP_EPO); } static void rfkill_event(struct input_handle *handle, unsigned int type, unsigned int code, int data) { if (type == EV_KEY && data == 1) { + enum rfkill_type t; + switch (code) { case KEY_WLAN: - rfkill_schedule_toggle(&rfkill_wlan); + t = RFKILL_TYPE_WLAN; break; case KEY_BLUETOOTH: - rfkill_schedule_toggle(&rfkill_bt); + t = RFKILL_TYPE_BLUETOOTH; break; case KEY_UWB: - rfkill_schedule_toggle(&rfkill_uwb); + t = RFKILL_TYPE_UWB; break; case KEY_WIMAX: - rfkill_schedule_toggle(&rfkill_wimax); + t = RFKILL_TYPE_WIMAX; break; default: - break; + return; } + rfkill_schedule_toggle(t); + return; } else if (type == EV_SW) { switch (code) { case SW_RFKILL_ALL: rfkill_schedule_evsw_rfkillall(data); - break; + return; default: - break; + return; } } } @@ -256,11 +409,9 @@ static struct input_handler rfkill_handler = { static int __init rfkill_handler_init(void) { - unsigned long last_run = jiffies - msecs_to_jiffies(500); - rfkill_wlan.last = last_run; - rfkill_bt.last = last_run; - rfkill_uwb.last = last_run; - rfkill_wimax.last = last_run; + if (rfkill_master_switch_mode >= RFKILL_INPUT_MASTER_MAX) + return -EINVAL; + return input_register_handler(&rfkill_handler); } @@ -268,6 +419,7 @@ static void __exit rfkill_handler_exit(void) { input_unregister_handler(&rfkill_handler); flush_scheduled_work(); + rfkill_remove_epo_lock(); } module_init(rfkill_handler_init); diff --git a/net/rfkill/rfkill-input.h b/net/rfkill/rfkill-input.h index d1e03e85cbed..fe8df6b5b935 100644 --- a/net/rfkill/rfkill-input.h +++ b/net/rfkill/rfkill-input.h @@ -14,6 +14,8 @@ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state); void rfkill_epo(void); void rfkill_restore_states(void); +void rfkill_remove_epo_lock(void); +bool rfkill_is_epo_lock_active(void); enum rfkill_state rfkill_get_global_state(const enum rfkill_type type); #endif /* __RFKILL_INPUT_H */ diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index fdf87d2ab25e..e348eab756f3 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -51,6 +51,7 @@ struct rfkill_gsw_state { static struct rfkill_gsw_state rfkill_global_states[RFKILL_TYPE_MAX]; static unsigned long rfkill_states_lockdflt[BITS_TO_LONGS(RFKILL_TYPE_MAX)]; +static bool rfkill_epo_lock_active; static BLOCKING_NOTIFIER_HEAD(rfkill_notifier_list); @@ -264,11 +265,14 @@ static void __rfkill_switch_all(const enum rfkill_type type, * * Acquires rfkill_global_mutex and calls __rfkill_switch_all(@type, @state). * Please refer to __rfkill_switch_all() for details. + * + * Does nothing if the EPO lock is active. */ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state) { mutex_lock(&rfkill_global_mutex); - __rfkill_switch_all(type, state); + if (!rfkill_epo_lock_active) + __rfkill_switch_all(type, state); mutex_unlock(&rfkill_global_mutex); } EXPORT_SYMBOL(rfkill_switch_all); @@ -289,6 +293,7 @@ void rfkill_epo(void) mutex_lock(&rfkill_global_mutex); + rfkill_epo_lock_active = true; list_for_each_entry(rfkill, &rfkill_list, node) { mutex_lock(&rfkill->mutex); rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); @@ -317,12 +322,42 @@ void rfkill_restore_states(void) mutex_lock(&rfkill_global_mutex); + rfkill_epo_lock_active = false; for (i = 0; i < RFKILL_TYPE_MAX; i++) __rfkill_switch_all(i, rfkill_global_states[i].default_state); mutex_unlock(&rfkill_global_mutex); } EXPORT_SYMBOL_GPL(rfkill_restore_states); +/** + * rfkill_remove_epo_lock - unlock state changes + * + * Used by rfkill-input manually unlock state changes, when + * the EPO switch is deactivated. + */ +void rfkill_remove_epo_lock(void) +{ + mutex_lock(&rfkill_global_mutex); + rfkill_epo_lock_active = false; + mutex_unlock(&rfkill_global_mutex); +} +EXPORT_SYMBOL_GPL(rfkill_remove_epo_lock); + +/** + * rfkill_is_epo_lock_active - returns true EPO is active + * + * Returns 0 (false) if there is NOT an active EPO contidion, + * and 1 (true) if there is an active EPO contition, which + * locks all radios in one of the BLOCKED states. + * + * Can be called in atomic context. + */ +bool rfkill_is_epo_lock_active(void) +{ + return rfkill_epo_lock_active; +} +EXPORT_SYMBOL_GPL(rfkill_is_epo_lock_active); + /** * rfkill_get_global_state - returns global state for a type * @type: the type to get the global state of @@ -447,7 +482,12 @@ static ssize_t rfkill_state_store(struct device *dev, error = mutex_lock_killable(&rfkill->mutex); if (error) return error; - error = rfkill_toggle_radio(rfkill, state, 0); + + if (!rfkill_epo_lock_active) + error = rfkill_toggle_radio(rfkill, state, 0); + else + error = -EPERM; + mutex_unlock(&rfkill->mutex); return error ? error : count; @@ -491,7 +531,7 @@ static ssize_t rfkill_claim_store(struct device *dev, return error; if (rfkill->user_claim != claim) { - if (!claim) { + if (!claim && !rfkill_epo_lock_active) { mutex_lock(&rfkill->mutex); rfkill_toggle_radio(rfkill, rfkill_global_states[rfkill->type].current_state, -- cgit v1.2.3 From 5c7f9b7363bfd10e40cf1a28dfc9048417df7028 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Tue, 14 Oct 2008 10:38:03 -0600 Subject: ipw2x00: change default policy for auto-associate Do not attempt association until directed to do so by a user space application. In particular, this avoids race conditions with NetworkManager association state. Signed-off-by: Tim Gardner Acked-by: Dan Williams Signed-off-by: John W. Linville --- Documentation/networking/README.ipw2200 | 2 +- drivers/net/wireless/ipw2100.c | 4 ++-- drivers/net/wireless/ipw2200.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/README.ipw2200 index 4f2a40f1dbc6..80c728522c4c 100644 --- a/Documentation/networking/README.ipw2200 +++ b/Documentation/networking/README.ipw2200 @@ -147,7 +147,7 @@ Where the supported parameter are: driver. If disabled, the driver will not attempt to scan for and associate to a network until it has been configured with one or more properties for the target network, for example configuring - the network SSID. Default is 1 (auto-associate) + the network SSID. Default is 0 (do not auto-associate) Example: % modprobe ipw2200 associate=0 diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 6e988d2486a7..079dbd07e2f6 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -185,7 +185,7 @@ MODULE_LICENSE("GPL"); static int debug = 0; static int mode = 0; static int channel = 0; -static int associate = 1; +static int associate = 0; static int disable = 0; #ifdef CONFIG_PM static struct ipw2100_fw ipw2100_firmware; @@ -201,7 +201,7 @@ module_param(disable, int, 0444); MODULE_PARM_DESC(debug, "debug level"); MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)"); MODULE_PARM_DESC(channel, "channel"); -MODULE_PARM_DESC(associate, "auto associate when scanning (default on)"); +MODULE_PARM_DESC(associate, "auto associate when scanning (default off)"); MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); static u32 ipw2100_debug_level = IPW_DL_NONE; diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 13633d8274a3..6ec6de2960ee 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -87,7 +87,7 @@ static int channel = 0; static int mode = 0; static u32 ipw_debug_level; -static int associate = 1; +static int associate; static int auto_create = 1; static int led = 0; static int disable = 0; @@ -11913,7 +11913,7 @@ module_param(disable, int, 0444); MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); module_param(associate, int, 0444); -MODULE_PARM_DESC(associate, "auto associate when scanning (default on)"); +MODULE_PARM_DESC(associate, "auto associate when scanning (default off)"); module_param(auto_create, int, 0444); MODULE_PARM_DESC(auto_create, "auto create adhoc network (default on)"); -- cgit v1.2.3 From d2372b315289aec9f565a855023c40654a5bff68 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Oct 2008 20:32:20 +0200 Subject: wireless: make regdom passing semantics simpler The regdom struct is given to the core, so it might as well free it in error conditions. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- Documentation/networking/regulatory.txt | 13 +++---------- include/net/wireless.h | 3 +-- net/wireless/nl80211.c | 5 +---- net/wireless/reg.c | 9 +++++---- 4 files changed, 10 insertions(+), 20 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt index a96989a8ff35..357d4ba4f135 100644 --- a/Documentation/networking/regulatory.txt +++ b/Documentation/networking/regulatory.txt @@ -167,7 +167,6 @@ struct ieee80211_regdomain mydriver_jp_regdom = { Then in some part of your code after your wiphy has been registered: - int r; struct ieee80211_regdomain *rd; int size_of_regd; int num_rules = mydriver_jp_regdom.n_reg_rules; @@ -178,17 +177,11 @@ Then in some part of your code after your wiphy has been registered: rd = kzalloc(size_of_regd, GFP_KERNEL); if (!rd) - return -ENOMEM; + return -ENOMEM; memcpy(rd, &mydriver_jp_regdom, sizeof(struct ieee80211_regdomain)); - for (i=0; i < num_rules; i++) { + for (i=0; i < num_rules; i++) memcpy(&rd->reg_rules[i], &mydriver_jp_regdom.reg_rules[i], sizeof(struct ieee80211_reg_rule)); - } - r = regulatory_hint(hw->wiphy, NULL, rd); - if (r) { - kfree(rd); - return r; - } - + return regulatory_hint(hw->wiphy, NULL, rd); diff --git a/include/net/wireless.h b/include/net/wireless.h index 061fe5017e5c..6e3ea0159045 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -358,8 +358,7 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq) * for a regulatory domain structure for the respective country. If * a regulatory domain is build and passed you should set the alpha2 * if possible, otherwise set it to the special value of "99" which tells - * the wireless core it is unknown. If you pass a built regulatory domain - * and we return non zero you are in charge of kfree()'ing the structure. + * the wireless core it is unknown. * * Returns -EALREADY if *a regulatory domain* has already been set. Note that * this could be by another driver. It is safe for drivers to continue if diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 9a16e9e6c5ca..f82cc9aa6908 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1935,12 +1935,9 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) mutex_lock(&cfg80211_drv_mutex); r = set_regdom(rd); mutex_unlock(&cfg80211_drv_mutex); - if (r) - goto bad_reg; - return r; -bad_reg: + bad_reg: kfree(rd); return -EINVAL; } diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 00c326b66c03..038f8f133c54 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -605,7 +605,6 @@ int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, return r; } -/* If rd is not NULL and if this call fails the caller must free it */ int regulatory_hint(struct wiphy *wiphy, const char *alpha2, struct ieee80211_regdomain *rd) { @@ -690,6 +689,7 @@ void print_regdomain_info(const struct ieee80211_regdomain *rd) print_rd_rules(rd); } +/* Takes ownership of rd only if it doesn't fail */ static int __set_regdom(const struct ieee80211_regdomain *rd) { /* Some basic sanity checks first */ @@ -750,16 +750,17 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) /* Use this call to set the current regulatory domain. Conflicts with * multiple drivers can be ironed out later. Caller must've already - * kmalloc'd the rd structure. If this calls fails you should kfree() - * the passed rd. Caller must hold cfg80211_drv_mutex */ + * kmalloc'd the rd structure. Caller must hold cfg80211_drv_mutex */ int set_regdom(const struct ieee80211_regdomain *rd) { int r; /* Note that this doesn't update the wiphys, this is done below */ r = __set_regdom(rd); - if (r) + if (r) { + kfree(rd); return r; + } /* This would make this whole thing pointless */ BUG_ON(rd != cfg80211_regdomain); -- cgit v1.2.3 From be3d48106c1e5d075784e5e67928a6b5ffc0f3b6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Oct 2008 20:32:21 +0200 Subject: wireless: remove struct regdom hinting The code needs to be split out and cleaned up, so as a first step remove the capability, to add it back in a subsequent patch as a separate function. Also remove the publically facing return value of the function and the wiphy argument. A number of internal functions go from being generic helpers to just being used for alpha2 setting. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- Documentation/networking/regulatory.txt | 11 +++--- drivers/net/wireless/zd1211rw/zd_mac.c | 2 +- include/net/wireless.h | 23 +++--------- net/wireless/nl80211.c | 2 +- net/wireless/reg.c | 63 +++++++++------------------------ net/wireless/reg.h | 23 ++++-------- 6 files changed, 36 insertions(+), 88 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt index 357d4ba4f135..dcf31648414a 100644 --- a/Documentation/networking/regulatory.txt +++ b/Documentation/networking/regulatory.txt @@ -131,11 +131,13 @@ are expected to do this during initialization. r = zd_reg2alpha2(mac->regdomain, alpha2); if (!r) - regulatory_hint(hw->wiphy, alpha2, NULL); + regulatory_hint(hw->wiphy, alpha2); Example code - drivers providing a built in regulatory domain: -------------------------------------------------------------- +[NOTE: This API is not currently available, it can be added when required] + If you have regulatory information you can obtain from your driver and you *need* to use this we let you build a regulatory domain structure and pass it to the wireless core. To do this you should @@ -182,6 +184,7 @@ Then in some part of your code after your wiphy has been registered: memcpy(rd, &mydriver_jp_regdom, sizeof(struct ieee80211_regdomain)); for (i=0; i < num_rules; i++) - memcpy(&rd->reg_rules[i], &mydriver_jp_regdom.reg_rules[i], - sizeof(struct ieee80211_reg_rule)); - return regulatory_hint(hw->wiphy, NULL, rd); + memcpy(&rd->reg_rules[i], + &mydriver_jp_regdom.reg_rules[i], + sizeof(struct ieee80211_reg_rule)); + regulatory_struct_hint(rd); diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 2f0802b29c4b..07513e48b8f2 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -171,7 +171,7 @@ int zd_mac_init_hw(struct ieee80211_hw *hw) r = zd_reg2alpha2(mac->regdomain, alpha2); if (!r) - regulatory_hint(hw->wiphy, alpha2, NULL); + regulatory_hint(hw->wiphy, alpha2); r = 0; disable_int: diff --git a/include/net/wireless.h b/include/net/wireless.h index 6e3ea0159045..41294c5f6f8f 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -342,34 +342,19 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq) /** * regulatory_hint - driver hint to the wireless core a regulatory domain - * @wiphy: the driver's very own &struct wiphy + * @wiphy: the wireless device giving the hint (used only for reporting + * conflicts) * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain * should be in. If @rd is set this should be NULL. Note that if you * set this to NULL you should still set rd->alpha2 to some accepted * alpha2. - * @rd: a complete regulatory domain provided by the driver. If passed - * the driver does not need to worry about freeing it. * * Wireless drivers can use this function to hint to the wireless core * what it believes should be the current regulatory domain by * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory * domain should be in or by providing a completely build regulatory domain. * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried - * for a regulatory domain structure for the respective country. If - * a regulatory domain is build and passed you should set the alpha2 - * if possible, otherwise set it to the special value of "99" which tells - * the wireless core it is unknown. - * - * Returns -EALREADY if *a regulatory domain* has already been set. Note that - * this could be by another driver. It is safe for drivers to continue if - * -EALREADY is returned, if drivers are not capable of world roaming they - * should not register more channels than they support. Right now we only - * support listening to the first driver hint. If the driver is capable - * of world roaming but wants to respect its own EEPROM mappings for - * specific regulatory domains it should register the @reg_notifier callback - * on the &struct wiphy. Returns 0 if the hint went through fine or through an - * intersection operation. Otherwise a standard error code is returned. + * for a regulatory domain structure for the respective country. */ -extern int regulatory_hint(struct wiphy *wiphy, - const char *alpha2, struct ieee80211_regdomain *rd); +extern void regulatory_hint(struct wiphy *wiphy, const char *alpha2); #endif /* __NET_WIRELESS_H */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index f82cc9aa6908..5e1d658a8b5a 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1695,7 +1695,7 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) return -EINVAL; #endif mutex_lock(&cfg80211_drv_mutex); - r = __regulatory_hint(NULL, REGDOM_SET_BY_USER, data, NULL); + r = __regulatory_hint(NULL, REGDOM_SET_BY_USER, data); mutex_unlock(&cfg80211_drv_mutex); return r; } diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 038f8f133c54..dc10071deaaa 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -42,7 +42,10 @@ #include "core.h" #include "reg.h" -/* wiphy is set if this request's initiator is REGDOM_SET_BY_DRIVER */ +/* + * wiphy is set if this request's initiator is + * REGDOM_SET_BY_COUNTRY_IE or _DRIVER + */ struct regulatory_request { struct wiphy *wiphy; enum reg_set_by initiator; @@ -298,7 +301,7 @@ static int call_crda(const char *alpha2) /* This has the logic which determines when a new request * should be ignored. */ static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, - char *alpha2, struct ieee80211_regdomain *rd) + const char *alpha2) { /* All initial requests are respected */ if (!last_request) @@ -343,22 +346,8 @@ static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, return 1; case REGDOM_SET_BY_DRIVER: BUG_ON(!wiphy); - if (last_request->initiator == REGDOM_SET_BY_DRIVER) { - /* Two separate drivers hinting different things, - * this is possible if you have two devices present - * on a system with different EEPROM regulatory - * readings. XXX: Do intersection, we support only - * the first regulatory hint for now */ - if (last_request->wiphy != wiphy) - return -EALREADY; - if (rd) - return -EALREADY; - /* Driver should not be trying to hint different - * regulatory domains! */ - BUG_ON(!alpha2_equal(alpha2, - cfg80211_regdomain->alpha2)); + if (last_request->initiator == REGDOM_SET_BY_DRIVER) return -EALREADY; - } if (last_request->initiator == REGDOM_SET_BY_CORE) return 0; /* XXX: Handle intersection, and add the @@ -557,40 +546,32 @@ void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby) /* Caller must hold &cfg80211_drv_mutex */ int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, - const char *alpha2, struct ieee80211_regdomain *rd) + const char *alpha2) { struct regulatory_request *request; - char *rd_alpha2; int r = 0; - r = ignore_request(wiphy, set_by, (char *) alpha2, rd); + r = ignore_request(wiphy, set_by, alpha2); if (r) return r; - if (rd) - rd_alpha2 = rd->alpha2; - else - rd_alpha2 = (char *) alpha2; - switch (set_by) { case REGDOM_SET_BY_CORE: case REGDOM_SET_BY_COUNTRY_IE: case REGDOM_SET_BY_DRIVER: case REGDOM_SET_BY_USER: request = kzalloc(sizeof(struct regulatory_request), - GFP_KERNEL); + GFP_KERNEL); if (!request) return -ENOMEM; - request->alpha2[0] = rd_alpha2[0]; - request->alpha2[1] = rd_alpha2[1]; + request->alpha2[0] = alpha2[0]; + request->alpha2[1] = alpha2[1]; request->initiator = set_by; request->wiphy = wiphy; kfree(last_request); last_request = request; - if (rd) - break; r = call_crda(alpha2); #ifndef CONFIG_WIRELESS_OLD_REGULATORY if (r) @@ -605,25 +586,13 @@ int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, return r; } -int regulatory_hint(struct wiphy *wiphy, const char *alpha2, - struct ieee80211_regdomain *rd) +void regulatory_hint(struct wiphy *wiphy, const char *alpha2) { - int r; - BUG_ON(!rd && !alpha2); + BUG_ON(!alpha2); mutex_lock(&cfg80211_drv_mutex); - - r = __regulatory_hint(wiphy, REGDOM_SET_BY_DRIVER, alpha2, rd); - if (r || !rd) - goto unlock_and_exit; - - /* If the driver passed a regulatory domain we skipped asking - * userspace for one so we can now go ahead and set it */ - r = set_regdom(rd); - -unlock_and_exit: + __regulatory_hint(wiphy, REGDOM_SET_BY_DRIVER, alpha2); mutex_unlock(&cfg80211_drv_mutex); - return r; } EXPORT_SYMBOL(regulatory_hint); @@ -792,11 +761,11 @@ int regulatory_init(void) * that is not a valid ISO / IEC 3166 alpha2 */ if (ieee80211_regdom[0] != 'E' || ieee80211_regdom[1] != 'U') err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, - ieee80211_regdom, NULL); + ieee80211_regdom); #else cfg80211_regdomain = cfg80211_world_regdom; - err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, "00", NULL); + err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, "00"); if (err) printk(KERN_ERR "cfg80211: calling CRDA failed - " "unable to update world regulatory domain, " diff --git a/net/wireless/reg.h b/net/wireless/reg.h index 0c1572b92fef..c9b6b6358bbe 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -11,30 +11,21 @@ int set_regdom(const struct ieee80211_regdomain *rd); /** * __regulatory_hint - hint to the wireless core a regulatory domain - * @wiphy: if a driver is providing the hint this is the driver's very - * own &struct wiphy + * @wiphy: if the hint comes from country information from an AP, this + * is required to be set to the wiphy that received the information * @alpha2: the ISO/IEC 3166 alpha2 being claimed the regulatory domain - * should be in. If @rd is set this should be NULL - * @rd: a complete regulatory domain, if passed the caller need not worry - * about freeing it + * should be in. * * The Wireless subsystem can use this function to hint to the wireless core * what it believes should be the current regulatory domain by * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory - * domain should be in or by providing a completely build regulatory domain. + * domain should be in. * - * Returns -EALREADY if *a regulatory domain* has already been set. Note that - * this could be by another driver. It is safe for drivers to continue if - * -EALREADY is returned, if drivers are not capable of world roaming they - * should not register more channels than they support. Right now we only - * support listening to the first driver hint. If the driver is capable - * of world roaming but wants to respect its own EEPROM mappings for - * specific regulatory domains it should register the @reg_notifier callback - * on the &struct wiphy. Returns 0 if the hint went through fine or through an - * intersection operation. Otherwise a standard error code is returned. + * Returns zero if all went fine, %-EALREADY if a regulatory domain had + * already been set or other standard error codes. * */ extern int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, - const char *alpha2, struct ieee80211_regdomain *rd); + const char *alpha2); #endif /* __NET_WIRELESS_REG_H */ -- cgit v1.2.3 From 395628ef4ea12ff0748099f145363b5e33c69acb Mon Sep 17 00:00:00 2001 From: Alok Kataria Date: Fri, 24 Oct 2008 17:22:01 -0700 Subject: x86: Skip verification by the watchdog for TSC clocksource. Impact: Changes timekeeping on Vmware (or with tsc=reliable). This is achieved by resetting the CLOCKSOURCE_MUST_VERIFY flag. We add a tsc=reliable commandline option to enable this. This enables legacy hardware without HPET, LAPIC, or ACPI timers to enter high-resolution timer mode. Along with that have extended this to be used in virtualization environement too. Now we also set this flag if the X86_FEATURE_TSC_RELIABLE bit is set. This is important since there is a wrap-around problem with the acpi_pm timer. The acpi_pm counter is just 24bits and this can overflow in ~4 seconds. With the NO_HZ kernels in virtualized environment, there can be situations when the guest is descheduled for longer duration, as a result we may miss the wrap of the acpi counter. When TSC is used as a clocksource and acpi_pm timer is being used as the watchdog clocksource this error in acpi_pm results in TSC being marked as unstable, and essentially results in time dropping in chunks of 4 seconds whenever this wrap is missed. Since the virtualized TSC is reliable on VMware, we should always use the TSCs clocksource on VMware, so we skip the verfication at runtime, by checking for the feature bit. Since we reset the flag for mgeode systems too, i have combined the mgeode case with the feature bit check. Signed-off-by: Jeff Hansen Signed-off-by: Alok N Kataria Signed-off-by: Dan Hecht Signed-off-by: H. Peter Anvin --- Documentation/kernel-parameters.txt | 7 +++++++ arch/x86/kernel/tsc.c | 33 +++++++++++++++++++++------------ 2 files changed, 28 insertions(+), 12 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1bbcaa8982b6..dc6b06f67fca 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2267,6 +2267,13 @@ and is between 256 and 4096 characters. It is defined in the file Format: ,,,,,,,, + tsc= Disable clocksource-must-verify flag for TSC. + Format: + [x86] reliable: mark tsc clocksource as reliable, this + disables clocksource verification at runtime. + Used to enable high-resolution timer mode on older + hardware, and in virtualized environment. + turbografx.map[2|3]= [HW,JOY] TurboGraFX parallel port interface Format: diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 6dbf0bcb44a8..ee01cd96b5e1 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -32,6 +32,7 @@ static int tsc_unstable; erroneous rdtsc usage on !cpu_has_tsc processors */ static int tsc_disabled = -1; +static int tsc_clocksource_reliable; /* * Scheduler clock - returns current time in nanosec units. */ @@ -99,6 +100,15 @@ int __init notsc_setup(char *str) __setup("notsc", notsc_setup); +static int __init tsc_setup(char *str) +{ + if (!strcmp(str, "reliable")) + tsc_clocksource_reliable = 1; + return 1; +} + +__setup("tsc=", tsc_setup); + #define MAX_RETRIES 5 #define SMI_TRESHOLD 50000 @@ -738,24 +748,21 @@ static struct dmi_system_id __initdata bad_tsc_dmi_table[] = { {} }; -/* - * Geode_LX - the OLPC CPU has a possibly a very reliable TSC - */ +static void __init check_system_tsc_reliable(void) +{ #ifdef CONFIG_MGEODE_LX -/* RTSC counts during suspend */ + /* RTSC counts during suspend */ #define RTSC_SUSP 0x100 - -static void __init check_geode_tsc_reliable(void) -{ unsigned long res_low, res_high; rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high); + /* Geode_LX - the OLPC CPU has a possibly a very reliable TSC */ if (res_low & RTSC_SUSP) - clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; -} -#else -static inline void check_geode_tsc_reliable(void) { } + tsc_clocksource_reliable = 1; #endif + if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) + tsc_clocksource_reliable = 1; +} /* * Make an educated guess if the TSC is trustworthy and synchronized @@ -790,6 +797,8 @@ static void __init init_tsc_clocksource(void) { clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, clocksource_tsc.shift); + if (tsc_clocksource_reliable) + clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; /* lower the rating if we already know its unstable: */ if (check_tsc_unstable()) { clocksource_tsc.rating = 0; @@ -850,7 +859,7 @@ void __init tsc_init(void) if (unsynchronized_tsc()) mark_tsc_unstable("TSCs unsynchronized"); - check_geode_tsc_reliable(); + check_system_tsc_reliable(); init_tsc_clocksource(); } -- cgit v1.2.3 From 3f8b4b13785c2737413d3241c21c7c86a41535ef Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Wed, 22 Oct 2008 11:19:48 +0000 Subject: bonding: update docs to correctly reflect arp_ip_target behavior This documentation patch hopes to clarify that the '+' was only needed for Fedora 7 and Red Hat Enterprise Linux 5.0 and 5.1. After that the IP addreses could be added as a comma separated list just like the module option. Signed-off-by: Andy Gospodarek Signed-off-by: Jeff Garzik --- Documentation/networking/bonding.txt | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 688dfe1e6b70..d733a428eff6 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -922,17 +922,19 @@ USERCTL=no NETMASK, NETWORK and BROADCAST) to match your network configuration. For later versions of initscripts, such as that found with Fedora -7 and Red Hat Enterprise Linux version 5 (or later), it is possible, and, -indeed, preferable, to specify the bonding options in the ifcfg-bond0 +7 (or later) and Red Hat Enterprise Linux version 5 (or later), it is possible, +and, indeed, preferable, to specify the bonding options in the ifcfg-bond0 file, e.g. a line of the format: -BONDING_OPTS="mode=active-backup arp_interval=60 arp_ip_target=+192.168.1.254" +BONDING_OPTS="mode=active-backup arp_interval=60 arp_ip_target=192.168.1.254" will configure the bond with the specified options. The options specified in BONDING_OPTS are identical to the bonding module parameters -except for the arp_ip_target field. Each target should be included as a -separate option and should be preceded by a '+' to indicate it should be -added to the list of queried targets, e.g., +except for the arp_ip_target field when using versions of initscripts older +than and 8.57 (Fedora 8) and 8.45.19 (Red Hat Enterprise Linux 5.2). When +using older versions each target should be included as a separate option and +should be preceded by a '+' to indicate it should be added to the list of +queried targets, e.g., arp_ip_target=+192.168.1.1 arp_ip_target=+192.168.1.2 @@ -940,7 +942,7 @@ added to the list of queried targets, e.g., options via BONDING_OPTS, it is not necessary to edit /etc/modules.conf or /etc/modprobe.conf. - For older versions of initscripts that do not support + For even older versions of initscripts that do not support BONDING_OPTS, it is necessary to edit /etc/modules.conf (or /etc/modprobe.conf, depending upon your distro) to load the bonding module with your desired options when the bond0 interface is brought up. The -- cgit v1.2.3 From d9e540762f5cdd89f24e518ad1fd31142d0b9726 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sat, 1 Nov 2008 19:57:37 +0100 Subject: ftrace: ftrace_dump_on_oops=[tracer] Impact: add new (optional) debug boot option In order to facilitate early boot trouble, allow one to specify a tracer on the kernel boot line. Signed-off-by: Peter Zijlstra Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 8 +++++ kernel/trace/trace.c | 58 ++++++++++++++++++++++++------------- 2 files changed, 46 insertions(+), 20 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1bbcaa8982b6..4862284d3119 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -765,6 +765,14 @@ and is between 256 and 4096 characters. It is defined in the file parameter will force ia64_sal_cache_flush to call ia64_pal_cache_flush instead of SAL_CACHE_FLUSH. + ftrace=[tracer] + [ftrace] will set and start the specified tracer + as early as possible in order to facilitate early + boot debugging. + + ftrace_dump_on_oops + [ftrace] will dump the trace buffers on oops. + gamecon.map[2|3]= [HW,JOY] Multisystem joystick and NES/SNES/PSX pad support via parallel port (up to 5 devices per port) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index bdb1df00fb10..482583eb8001 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -79,6 +79,15 @@ static int tracing_disabled = 1; */ int ftrace_dump_on_oops; +static int tracing_set_tracer(char *buf); + +static int __init set_ftrace(char *str) +{ + tracing_set_tracer(str); + return 1; +} +__setup("ftrace", set_ftrace); + static int __init set_ftrace_dump_on_oops(char *str) { ftrace_dump_on_oops = 1; @@ -2394,29 +2403,11 @@ tracing_set_trace_read(struct file *filp, char __user *ubuf, return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); } -static ssize_t -tracing_set_trace_write(struct file *filp, const char __user *ubuf, - size_t cnt, loff_t *ppos) +static int tracing_set_tracer(char *buf) { struct trace_array *tr = &global_trace; struct tracer *t; - char buf[max_tracer_type_len+1]; - int i; - size_t ret; - - ret = cnt; - - if (cnt > max_tracer_type_len) - cnt = max_tracer_type_len; - - if (copy_from_user(&buf, ubuf, cnt)) - return -EFAULT; - - buf[cnt] = 0; - - /* strip ending whitespace. */ - for (i = cnt - 1; i > 0 && isspace(buf[i]); i--) - buf[i] = 0; + int ret = 0; mutex_lock(&trace_types_lock); for (t = trace_types; t; t = t->next) { @@ -2440,6 +2431,33 @@ tracing_set_trace_write(struct file *filp, const char __user *ubuf, out: mutex_unlock(&trace_types_lock); + return ret; +} + +static ssize_t +tracing_set_trace_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char buf[max_tracer_type_len+1]; + int i; + size_t ret; + + if (cnt > max_tracer_type_len) + cnt = max_tracer_type_len; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + /* strip ending whitespace. */ + for (i = cnt - 1; i > 0 && isspace(buf[i]); i--) + buf[i] = 0; + + ret = tracing_set_tracer(buf); + if (!ret) + ret = cnt; + if (ret > 0) filp->f_pos += ret; -- cgit v1.2.3 From 5b9a0e14eb4bf40a7cb780af4723560e06753f2d Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 1 Nov 2008 18:06:51 +0300 Subject: x86: nmi - nmi_watchdog boot param docs cleanup Impact: documentation update 1) nmi_watchdog boot parameter is common to 32/64 bit modes. So move it from Documentation/x86/x86_64/boot-options.txt to Documentation/kernel-parameters.txt and integrate with. 2) Also fix [panic] keyword placement -- it ought to be at first position otherwise it will not be recognized. 3) Document lapic and ioapic keywords. Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 15 ++++++++++++++- Documentation/x86/x86_64/boot-options.txt | 11 ----------- 2 files changed, 14 insertions(+), 12 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 343e0f0f84b6..6246220ac914 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1403,7 +1403,20 @@ and is between 256 and 4096 characters. It is defined in the file when a NMI is triggered. Format: [state][,regs][,debounce][,die] - nmi_watchdog= [KNL,BUGS=X86-32] Debugging features for SMP kernels + nmi_watchdog= [KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels + Format: [panic,][num] + Valid num: 0,1,2 + 0 - turn nmi_watchdog off + 1 - use the IO-APIC timer for the NMI watchdog + 2 - use the local APIC for the NMI watchdog using + a performance counter. Note: This will use one performance + counter and the local APIC's performance vector. + When panic is specified panic when an NMI watchdog timeout occurs. + This is useful when you use a panic=... timeout and need the box + quickly up again. + Instead of 1 and 2 it is possible to use the following + symbolic names: lapic and ioapic + Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic no387 [BUGS=X86-32] Tells the kernel to use the 387 maths emulation library even if a 387 maths coprocessor diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index 72ffb5373ec7..bc8a339c1f27 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -79,17 +79,6 @@ Timing Report when timer interrupts are lost because some code turned off interrupts for too long. - nmi_watchdog=NUMBER[,panic] - NUMBER can be: - 0 don't use an NMI watchdog - 1 use the IO-APIC timer for the NMI watchdog - 2 use the local APIC for the NMI watchdog using a performance counter. Note - This will use one performance counter and the local APIC's performance - vector. - When panic is specified panic when an NMI watchdog timeout occurs. - This is useful when you use a panic=... timeout and need the box - quickly up again. - nohpet Don't use the HPET timer. -- cgit v1.2.3 From 26f5df265f06b8c8fe9f5d0942b7d8df00e5edec Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 3 Nov 2008 17:39:46 +0100 Subject: ALSA: hda - Add ALC299 fujitsu preset model Added a preset model for FSC Amilo with ALC269 codec chip. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 2 ++ sound/pci/hda/patch_realtek.c | 29 ++++++++++++++++++++++++- 2 files changed, 30 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index e0e54a27fc10..fa8e9fadfaf4 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -857,6 +857,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. quanta Quanta FL1 eeepc-p703 ASUS Eeepc P703 P900A eeepc-p901 ASUS Eeepc P901 S101 + fujitsu FSC Amilo + auto auto-config reading BIOS (default) ALC662/663 3stack-dig 3-stack (2-channel) with SPDIF diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 88e54db0582c..700fc8632c66 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -130,6 +130,7 @@ enum { ALC269_QUANTA_FL1, ALC269_ASUS_EEEPC_P703, ALC269_ASUS_EEEPC_P901, + ALC269_FUJITSU, ALC269_AUTO, ALC269_MODEL_LAST /* last tag */ }; @@ -1726,6 +1727,7 @@ static const char *alc_slave_vols[] = { "Speaker Playback Volume", "Mono Playback Volume", "Line-Out Playback Volume", + "PCM Playback Volume", NULL, }; @@ -11662,6 +11664,15 @@ static struct snd_kcontrol_new alc269_eeepc_mixer[] = { static struct snd_kcontrol_new alc269_epc_capture_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + { } /* end */ +}; + +/* FSC amilo */ +static struct snd_kcontrol_new alc269_fujitsu_mixer[] = { + HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), + HDA_BIND_VOL("PCM Playback Volume", &alc269_epc_bind_vol), { } /* end */ }; @@ -12084,7 +12095,8 @@ static const char *alc269_models[ALC269_MODEL_LAST] = { [ALC269_BASIC] = "basic", [ALC269_QUANTA_FL1] = "quanta", [ALC269_ASUS_EEEPC_P703] = "eeepc-p703", - [ALC269_ASUS_EEEPC_P901] = "eeepc-p901" + [ALC269_ASUS_EEEPC_P901] = "eeepc-p901", + [ALC269_FUJITSU] = "fujitsu" }; static struct snd_pci_quirk alc269_cfg_tbl[] = { @@ -12095,6 +12107,7 @@ static struct snd_pci_quirk alc269_cfg_tbl[] = { ALC269_ASUS_EEEPC_P901), SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101", ALC269_ASUS_EEEPC_P901), + SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU), {} }; @@ -12149,6 +12162,20 @@ static struct alc_config_preset alc269_presets[] = { .unsol_event = alc269_eeepc_dmic_unsol_event, .init_hook = alc269_eeepc_dmic_inithook, }, + [ALC269_FUJITSU] = { + .mixers = { alc269_fujitsu_mixer, alc269_beep_mixer }, + .cap_mixer = alc269_epc_capture_mixer, + .init_verbs = { alc269_init_verbs, + alc269_eeepc_dmic_init_verbs }, + .num_dacs = ARRAY_SIZE(alc269_dac_nids), + .dac_nids = alc269_dac_nids, + .hp_nid = 0x03, + .num_channel_mode = ARRAY_SIZE(alc269_modes), + .channel_mode = alc269_modes, + .input_mux = &alc269_eeepc_dmic_capture_source, + .unsol_event = alc269_eeepc_dmic_unsol_event, + .init_hook = alc269_eeepc_dmic_inithook, + }, }; static int patch_alc269(struct hda_codec *codec) -- cgit v1.2.3 From 13c947444f4355293b49f83b809f178393a0a4d9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 5 Nov 2008 08:06:08 +0100 Subject: ALSA: hda - Add ASUS V1Sn support Asus V1s series laptops have an ALC660VD with PCI id: 0x1043, 0x1633. 1.) remove the previous behaviour of mapping that to the ALC861VD_LENOVO device. 2.) add a new ALC660VD_V1S device based on ALC861VD_LENOVO, with an added digital out. Signed-off-by: Tristan Aston Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_realtek.c | 19 ++++++++++++++++++- 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index fa8e9fadfaf4..f6594549bf5d 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -940,6 +940,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. lenovo Lenovo 3000 C200 dallas Dallas laptops hp HP TX1000 + asus-v1s ASUS V1Sn auto auto-config reading BIOS (default) CMI9880 diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e727e48a48e3..15779d8c7564 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -153,6 +153,7 @@ enum { enum { ALC660VD_3ST, ALC660VD_3ST_DIG, + ALC660VD_ASUS_V1S, ALC861VD_3ST, ALC861VD_3ST_DIG, ALC861VD_6ST_DIG, @@ -13842,6 +13843,7 @@ static void alc861vd_dallas_unsol_event(struct hda_codec *codec, unsigned int re static const char *alc861vd_models[ALC861VD_MODEL_LAST] = { [ALC660VD_3ST] = "3stack-660", [ALC660VD_3ST_DIG] = "3stack-660-digout", + [ALC660VD_ASUS_V1S] = "asus-v1s", [ALC861VD_3ST] = "3stack", [ALC861VD_3ST_DIG] = "3stack-digout", [ALC861VD_6ST_DIG] = "6stack-digout", @@ -13856,7 +13858,7 @@ static struct snd_pci_quirk alc861vd_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x30bf, "HP TX1000", ALC861VD_HP), SND_PCI_QUIRK(0x1043, 0x12e2, "Asus z35m", ALC660VD_3ST), SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST), - SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC861VD_LENOVO), + SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC660VD_ASUS_V1S), SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS", ALC660VD_3ST_DIG), SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST), SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba A135", ALC861VD_LENOVO), @@ -13963,6 +13965,21 @@ static struct alc_config_preset alc861vd_presets[] = { .unsol_event = alc861vd_dallas_unsol_event, .init_hook = alc861vd_dallas_automute, }, + [ALC660VD_ASUS_V1S] = { + .mixers = { alc861vd_lenovo_mixer }, + .init_verbs = { alc861vd_volume_init_verbs, + alc861vd_3stack_init_verbs, + alc861vd_eapd_verbs, + alc861vd_lenovo_unsol_verbs }, + .num_dacs = ARRAY_SIZE(alc660vd_dac_nids), + .dac_nids = alc660vd_dac_nids, + .dig_out_nid = ALC861VD_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes), + .channel_mode = alc861vd_3stack_2ch_modes, + .input_mux = &alc861vd_capture_source, + .unsol_event = alc861vd_lenovo_unsol_event, + .init_hook = alc861vd_lenovo_automute, + }, }; /* -- cgit v1.2.3 From c238b4f4038e0e49bb241640610584a088b268b1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 5 Nov 2008 14:57:20 +0100 Subject: ALSA: hda - Split ALC268 acer model There are actually two variants of ALC268 Acer implementation, one with an analog built-in mic (pin 0x19) and another with a digital mic (pin 0x12). Created a new model, acer-dmic, for the latter case now. So far, all known models are assigned to be analog-mic, according to the BIOS setup. If this doesn't match with the actual case, one needs to try model=acer-dmic, and fix the entry to point ALC268_ACER_DMIC if it works. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_realtek.c | 44 +++++++++++++++++++++++++ 2 files changed, 45 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index f6594549bf5d..3ab5fb1357a2 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -844,6 +844,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack 3-stack model toshiba Toshiba A205 acer Acer laptops + acer-dmic Acer laptops with digital-mic acer-aspire Acer Aspire One dell Dell OEM laptops (Vostro 1200) zepto Zepto laptops diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 15779d8c7564..425b0fc86f7d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -114,6 +114,7 @@ enum { ALC268_3ST, ALC268_TOSHIBA, ALC268_ACER, + ALC268_ACER_DMIC, ALC268_ACER_ASPIRE_ONE, ALC268_DELL, ALC268_ZEPTO, @@ -10714,6 +10715,22 @@ static struct snd_kcontrol_new alc268_acer_mixer[] = { { } }; +static struct snd_kcontrol_new alc268_acer_dmic_mixer[] = { + /* output mixer control */ + HDA_BIND_VOL("Master Playback Volume", &alc268_acer_bind_master_vol), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Switch", + .info = snd_hda_mixer_amp_switch_info, + .get = snd_hda_mixer_amp_switch_get, + .put = alc268_acer_master_sw_put, + .private_value = HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT), + }, + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_VOLUME("Line In Boost", 0x1a, 0, HDA_INPUT), + { } +}; + static struct hda_verb alc268_acer_aspire_one_verbs[] = { {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, @@ -11039,6 +11056,15 @@ static struct hda_input_mux alc268_capture_source = { }; static struct hda_input_mux alc268_acer_capture_source = { + .num_items = 3, + .items = { + { "Mic", 0x0 }, + { "Internal Mic", 0x1 }, + { "Line", 0x2 }, + }, +}; + +static struct hda_input_mux alc268_acer_dmic_capture_source = { .num_items = 3, .items = { { "Mic", 0x0 }, @@ -11322,6 +11348,7 @@ static const char *alc268_models[ALC268_MODEL_LAST] = { [ALC268_3ST] = "3stack", [ALC268_TOSHIBA] = "toshiba", [ALC268_ACER] = "acer", + [ALC268_ACER_DMIC] = "acer-dmic", [ALC268_ACER_ASPIRE_ONE] = "acer-aspire", [ALC268_DELL] = "dell", [ALC268_ZEPTO] = "zepto", @@ -11417,6 +11444,23 @@ static struct alc_config_preset alc268_presets[] = { .unsol_event = alc268_acer_unsol_event, .init_hook = alc268_acer_init_hook, }, + [ALC268_ACER_DMIC] = { + .mixers = { alc268_acer_dmic_mixer, alc268_capture_alt_mixer, + alc268_beep_mixer }, + .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs, + alc268_acer_verbs }, + .num_dacs = ARRAY_SIZE(alc268_dac_nids), + .dac_nids = alc268_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt), + .adc_nids = alc268_adc_nids_alt, + .capsrc_nids = alc268_capsrc_nids, + .hp_nid = 0x02, + .num_channel_mode = ARRAY_SIZE(alc268_modes), + .channel_mode = alc268_modes, + .input_mux = &alc268_acer_dmic_capture_source, + .unsol_event = alc268_acer_unsol_event, + .init_hook = alc268_acer_init_hook, + }, [ALC268_ACER_ASPIRE_ONE] = { .mixers = { alc268_acer_aspire_one_mixer, alc268_capture_alt_mixer }, -- cgit v1.2.3 From 1f29fae29709b4668979e244c09b2fa78ff1ad59 Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Wed, 5 Nov 2008 16:08:52 -0600 Subject: file capabilities: add no_file_caps switch (v4) Add a no_file_caps boot option when file capabilities are compiled into the kernel (CONFIG_SECURITY_FILE_CAPABILITIES=y). This allows distributions to ship a kernel with file capabilities compiled in, without forcing users to use (and understand and trust) them. When no_file_caps is specified at boot, then when a process executes a file, any file capabilities stored with that file will not be used in the calculation of the process' new capability sets. This means that booting with the no_file_caps boot option will not be the same as booting a kernel with file capabilities compiled out - in particular a task with CAP_SETPCAP will not have any chance of passing capabilities to another task (which isn't "really" possible anyway, and which may soon by killed altogether by David Howells in any case), and it will instead be able to put new capabilities in its pI. However since fI will always be empty and pI is masked with fI, it gains the task nothing. We also support the extra prctl options, setting securebits and dropping capabilities from the per-process bounding set. The other remaining difference is that killpriv, task_setscheduler, setioprio, and setnice will continue to be hooked. That will be noticable in the case where a root task changed its uid while keeping some caps, and another task owned by the new uid tries to change settings for the more privileged task. Changelog: Nov 05 2008: (v4) trivial port on top of always-start-\ with-clear-caps patch Sep 23 2008: nixed file_caps_enabled when file caps are not compiled in as it isn't used. Document no_file_caps in kernel-parameters.txt. Signed-off-by: Serge Hallyn Acked-by: Andrew G. Morgan Signed-off-by: James Morris --- Documentation/kernel-parameters.txt | 4 ++++ include/linux/capability.h | 3 +++ kernel/capability.c | 11 +++++++++++ security/commoncap.c | 3 +++ 4 files changed, 21 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1bbcaa8982b6..784443acca9c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1459,6 +1459,10 @@ and is between 256 and 4096 characters. It is defined in the file instruction doesn't work correctly and not to use it. + no_file_caps Tells the kernel not to honor file capabilities. The + only way then for a file to be executed with privilege + is to be setuid root or executed by root. + nohalt [IA-64] Tells the kernel not to use the power saving function PAL_HALT_LIGHT when idle. This increases power-consumption. On the positive side, it reduces diff --git a/include/linux/capability.h b/include/linux/capability.h index 9d1fe30b6f6c..5bc145bd759a 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -68,6 +68,9 @@ typedef struct __user_cap_data_struct { #define VFS_CAP_U32 VFS_CAP_U32_2 #define VFS_CAP_REVISION VFS_CAP_REVISION_2 +#ifdef CONFIG_SECURITY_FILE_CAPABILITIES +extern int file_caps_enabled; +#endif struct vfs_cap_data { __le32 magic_etc; /* Little endian */ diff --git a/kernel/capability.c b/kernel/capability.c index 33e51e78c2d8..e13a68535ad5 100644 --- a/kernel/capability.c +++ b/kernel/capability.c @@ -33,6 +33,17 @@ EXPORT_SYMBOL(__cap_empty_set); EXPORT_SYMBOL(__cap_full_set); EXPORT_SYMBOL(__cap_init_eff_set); +#ifdef CONFIG_SECURITY_FILE_CAPABILITIES +int file_caps_enabled = 1; + +static int __init file_caps_disable(char *str) +{ + file_caps_enabled = 0; + return 1; +} +__setup("no_file_caps", file_caps_disable); +#endif + /* * More recent versions of libcap are available from: * diff --git a/security/commoncap.c b/security/commoncap.c index 3976613db829..f88119cb2bc2 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -281,6 +281,9 @@ static int get_file_caps(struct linux_binprm *bprm) bprm_clear_caps(bprm); + if (!file_caps_enabled) + return 0; + if (bprm->file->f_vfsmnt->mnt_flags & MNT_NOSUID) return 0; -- cgit v1.2.3 From 305d552accae6afb859c493ebc7d98ca3371dae2 Mon Sep 17 00:00:00 2001 From: Brian Haley Date: Tue, 4 Nov 2008 17:51:14 -0800 Subject: bonding: send IPv6 neighbor advertisement on failover This patch adds better IPv6 failover support for bonding devices, especially when in active-backup mode and there are only IPv6 addresses configured, as reported by Alex Sidorenko. - Creates a new file, net/drivers/bonding/bond_ipv6.c, for the IPv6-specific routines. Both regular bonds and VLANs over bonds are supported. - Adds a new tunable, num_unsol_na, to limit the number of unsolicited IPv6 Neighbor Advertisements that are sent on a failover event. Default is 1. - Creates two new IPv6 neighbor discovery functions: ndisc_build_skb() ndisc_send_skb() These were required to support VLANs since we have to be able to add the VLAN id to the skb since ndisc_send_na() and friends shouldn't be asked to do this. These two routines are basically __ndisc_send() split into two pieces, in a slightly different order. - Updates Documentation/networking/bonding.txt and bumps the rev of bond support to 3.4.0. On failover, this new code will generate one packet: - An unsolicited IPv6 Neighbor Advertisement, which helps the switch learn that the address has moved to the new slave. Testing has shown that sending just the NA results in pretty good behavior when in active-back mode, I saw no lost ping packets for example. Signed-off-by: Brian Haley Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- Documentation/networking/bonding.txt | 10 ++ drivers/net/Kconfig | 1 + drivers/net/bonding/Makefile | 3 + drivers/net/bonding/bond_ipv6.c | 218 +++++++++++++++++++++++++++++++++++ drivers/net/bonding/bond_main.c | 33 +++++- drivers/net/bonding/bond_sysfs.c | 42 +++++++ drivers/net/bonding/bonding.h | 34 +++++- include/net/ndisc.h | 14 +++ net/ipv6/ndisc.c | 92 ++++++++++----- 9 files changed, 416 insertions(+), 31 deletions(-) create mode 100644 drivers/net/bonding/bond_ipv6.c (limited to 'Documentation') diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index d733a428eff6..3f4d0fae7081 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -551,6 +551,16 @@ num_grat_arp affects only the active-backup mode. This option was added for bonding version 3.3.0. +num_unsol_na + + Specifies the number of unsolicited IPv6 Neighbor Advertisements + to be issued after a failover event. One unsolicited NA is issued + immediately after the failover. + + The valid range is 0 - 255; the default value is 1. This option + affects only the active-backup mode. This option was added for + bonding version 3.4.0. + primary A string (eth0, eth2, etc) specifying which slave is the diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0f3e6b2d2808..f1d0a1371695 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -61,6 +61,7 @@ config DUMMY config BONDING tristate "Bonding driver support" depends on INET + depends on IPV6 || IPV6=n ---help--- Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet Channels together. This is called 'Etherchannel' by Cisco, diff --git a/drivers/net/bonding/Makefile b/drivers/net/bonding/Makefile index 5cdae2bc055a..6f9c6faef24c 100644 --- a/drivers/net/bonding/Makefile +++ b/drivers/net/bonding/Makefile @@ -6,3 +6,6 @@ obj-$(CONFIG_BONDING) += bonding.o bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o +ipv6-$(subst m,y,$(CONFIG_IPV6)) += bond_ipv6.o +bonding-objs += $(ipv6-y) + diff --git a/drivers/net/bonding/bond_ipv6.c b/drivers/net/bonding/bond_ipv6.c new file mode 100644 index 000000000000..7c78b7bf671c --- /dev/null +++ b/drivers/net/bonding/bond_ipv6.c @@ -0,0 +1,218 @@ +/* + * Copyright(c) 2008 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + */ + +//#define BONDING_DEBUG 1 + +#include +#include +#include +#include +#include +#include "bonding.h" + +/* + * Assign bond->master_ipv6 to the next IPv6 address in the list, or + * zero it out if there are none. + */ +static void bond_glean_dev_ipv6(struct net_device *dev, struct in6_addr *addr) +{ + struct inet6_dev *idev; + struct inet6_ifaddr *ifa; + + if (!dev) + return; + + idev = in6_dev_get(dev); + if (!idev) + return; + + read_lock_bh(&idev->lock); + ifa = idev->addr_list; + if (ifa) + ipv6_addr_copy(addr, &ifa->addr); + else + ipv6_addr_set(addr, 0, 0, 0, 0); + + read_unlock_bh(&idev->lock); + + in6_dev_put(idev); +} + +static void bond_na_send(struct net_device *slave_dev, + struct in6_addr *daddr, + int router, + unsigned short vlan_id) +{ + struct in6_addr mcaddr; + struct icmp6hdr icmp6h = { + .icmp6_type = NDISC_NEIGHBOUR_ADVERTISEMENT, + }; + struct sk_buff *skb; + + icmp6h.icmp6_router = router; + icmp6h.icmp6_solicited = 0; + icmp6h.icmp6_override = 1; + + addrconf_addr_solict_mult(daddr, &mcaddr); + + dprintk("ipv6 na on slave %s: dest %pI6, src %pI6\n", + slave->name, &mcaddr, daddr); + + skb = ndisc_build_skb(slave_dev, &mcaddr, daddr, &icmp6h, daddr, + ND_OPT_TARGET_LL_ADDR); + + if (!skb) { + printk(KERN_ERR DRV_NAME ": NA packet allocation failed\n"); + return; + } + + if (vlan_id) { + skb = vlan_put_tag(skb, vlan_id); + if (!skb) { + printk(KERN_ERR DRV_NAME ": failed to insert VLAN tag\n"); + return; + } + } + + ndisc_send_skb(skb, slave_dev, NULL, &mcaddr, daddr, &icmp6h); +} + +/* + * Kick out an unsolicited Neighbor Advertisement for an IPv6 address on + * the bonding master. This will help the switch learn our address + * if in active-backup mode. + * + * Caller must hold curr_slave_lock for read or better + */ +void bond_send_unsolicited_na(struct bonding *bond) +{ + struct slave *slave = bond->curr_active_slave; + struct vlan_entry *vlan; + struct inet6_dev *idev; + int is_router; + + dprintk("bond_send_unsol_na: bond %s slave %s\n", bond->dev->name, + slave ? slave->dev->name : "NULL"); + + if (!slave || !bond->send_unsol_na || + test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state)) + return; + + bond->send_unsol_na--; + + idev = in6_dev_get(bond->dev); + if (!idev) + return; + + is_router = !!idev->cnf.forwarding; + + in6_dev_put(idev); + + if (!ipv6_addr_any(&bond->master_ipv6)) + bond_na_send(slave->dev, &bond->master_ipv6, is_router, 0); + + list_for_each_entry(vlan, &bond->vlan_list, vlan_list) { + if (!ipv6_addr_any(&vlan->vlan_ipv6)) { + bond_na_send(slave->dev, &vlan->vlan_ipv6, is_router, + vlan->vlan_id); + } + } +} + +/* + * bond_inet6addr_event: handle inet6addr notifier chain events. + * + * We keep track of device IPv6 addresses primarily to use as source + * addresses in NS probes. + * + * We track one IPv6 for the main device (if it has one). + */ +static int bond_inet6addr_event(struct notifier_block *this, + unsigned long event, + void *ptr) +{ + struct inet6_ifaddr *ifa = ptr; + struct net_device *vlan_dev, *event_dev = ifa->idev->dev; + struct bonding *bond; + struct vlan_entry *vlan; + + if (dev_net(event_dev) != &init_net) + return NOTIFY_DONE; + + list_for_each_entry(bond, &bond_dev_list, bond_list) { + if (bond->dev == event_dev) { + switch (event) { + case NETDEV_UP: + if (ipv6_addr_any(&bond->master_ipv6)) + ipv6_addr_copy(&bond->master_ipv6, + &ifa->addr); + return NOTIFY_OK; + case NETDEV_DOWN: + if (ipv6_addr_equal(&bond->master_ipv6, + &ifa->addr)) + bond_glean_dev_ipv6(bond->dev, + &bond->master_ipv6); + return NOTIFY_OK; + default: + return NOTIFY_DONE; + } + } + + list_for_each_entry(vlan, &bond->vlan_list, vlan_list) { + vlan_dev = vlan_group_get_device(bond->vlgrp, + vlan->vlan_id); + if (vlan_dev == event_dev) { + switch (event) { + case NETDEV_UP: + if (ipv6_addr_any(&vlan->vlan_ipv6)) + ipv6_addr_copy(&vlan->vlan_ipv6, + &ifa->addr); + return NOTIFY_OK; + case NETDEV_DOWN: + if (ipv6_addr_equal(&vlan->vlan_ipv6, + &ifa->addr)) + bond_glean_dev_ipv6(vlan_dev, + &vlan->vlan_ipv6); + return NOTIFY_OK; + default: + return NOTIFY_DONE; + } + } + } + } + return NOTIFY_DONE; +} + +static struct notifier_block bond_inet6addr_notifier = { + .notifier_call = bond_inet6addr_event, +}; + +void bond_register_ipv6_notifier(void) +{ + register_inet6addr_notifier(&bond_inet6addr_notifier); +} + +void bond_unregister_ipv6_notifier(void) +{ + unregister_inet6addr_notifier(&bond_inet6addr_notifier); +} + diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 39575d764974..798d98ce2d97 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -89,6 +89,7 @@ static int max_bonds = BOND_DEFAULT_MAX_BONDS; static int num_grat_arp = 1; +static int num_unsol_na = 1; static int miimon = BOND_LINK_MON_INTERV; static int updelay = 0; static int downdelay = 0; @@ -107,6 +108,8 @@ module_param(max_bonds, int, 0); MODULE_PARM_DESC(max_bonds, "Max number of bonded devices"); module_param(num_grat_arp, int, 0644); MODULE_PARM_DESC(num_grat_arp, "Number of gratuitous ARP packets to send on failover event"); +module_param(num_unsol_na, int, 0644); +MODULE_PARM_DESC(num_unsol_na, "Number of unsolicited IPv6 Neighbor Advertisements packets to send on failover event"); module_param(miimon, int, 0); MODULE_PARM_DESC(miimon, "Link check interval in milliseconds"); module_param(updelay, int, 0); @@ -242,14 +245,13 @@ static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id) dprintk("bond: %s, vlan id %d\n", (bond ? bond->dev->name: "None"), vlan_id); - vlan = kmalloc(sizeof(struct vlan_entry), GFP_KERNEL); + vlan = kzalloc(sizeof(struct vlan_entry), GFP_KERNEL); if (!vlan) { return -ENOMEM; } INIT_LIST_HEAD(&vlan->vlan_list); vlan->vlan_id = vlan_id; - vlan->vlan_ip = 0; write_lock_bh(&bond->lock); @@ -1208,6 +1210,9 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active) bond->send_grat_arp = bond->params.num_grat_arp; bond_send_gratuitous_arp(bond); + bond->send_unsol_na = bond->params.num_unsol_na; + bond_send_unsolicited_na(bond); + write_unlock_bh(&bond->curr_slave_lock); read_unlock(&bond->lock); @@ -2463,6 +2468,12 @@ void bond_mii_monitor(struct work_struct *work) read_unlock(&bond->curr_slave_lock); } + if (bond->send_unsol_na) { + read_lock(&bond->curr_slave_lock); + bond_send_unsolicited_na(bond); + read_unlock(&bond->curr_slave_lock); + } + if (bond_miimon_inspect(bond)) { read_unlock(&bond->lock); rtnl_lock(); @@ -3158,6 +3169,12 @@ void bond_activebackup_arp_mon(struct work_struct *work) read_unlock(&bond->curr_slave_lock); } + if (bond->send_unsol_na) { + read_lock(&bond->curr_slave_lock); + bond_send_unsolicited_na(bond); + read_unlock(&bond->curr_slave_lock); + } + if (bond_ab_arp_inspect(bond, delta_in_ticks)) { read_unlock(&bond->lock); rtnl_lock(); @@ -3827,6 +3844,7 @@ static int bond_close(struct net_device *bond_dev) write_lock_bh(&bond->lock); bond->send_grat_arp = 0; + bond->send_unsol_na = 0; /* signal timers not to re-arm */ bond->kill_timers = 1; @@ -4542,6 +4560,7 @@ static int bond_init(struct net_device *bond_dev, struct bond_params *params) bond->primary_slave = NULL; bond->dev = bond_dev; bond->send_grat_arp = 0; + bond->send_unsol_na = 0; bond->setup_by_slave = 0; INIT_LIST_HEAD(&bond->vlan_list); @@ -4791,6 +4810,13 @@ static int bond_check_params(struct bond_params *params) num_grat_arp = 1; } + if (num_unsol_na < 0 || num_unsol_na > 255) { + printk(KERN_WARNING DRV_NAME + ": Warning: num_unsol_na (%d) not in range 0-255 so it " + "was reset to 1 \n", num_unsol_na); + num_unsol_na = 1; + } + /* reset values for 802.3ad */ if (bond_mode == BOND_MODE_8023AD) { if (!miimon) { @@ -4992,6 +5018,7 @@ static int bond_check_params(struct bond_params *params) params->xmit_policy = xmit_hashtype; params->miimon = miimon; params->num_grat_arp = num_grat_arp; + params->num_unsol_na = num_unsol_na; params->arp_interval = arp_interval; params->arp_validate = arp_validate_value; params->updelay = updelay; @@ -5144,6 +5171,7 @@ static int __init bonding_init(void) register_netdevice_notifier(&bond_netdev_notifier); register_inetaddr_notifier(&bond_inetaddr_notifier); + bond_register_ipv6_notifier(); goto out; err: @@ -5166,6 +5194,7 @@ static void __exit bonding_exit(void) { unregister_netdevice_notifier(&bond_netdev_notifier); unregister_inetaddr_notifier(&bond_inetaddr_notifier); + bond_unregister_ipv6_notifier(); bond_destroy_sysfs(); diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index e400d7dfdfc8..8788e3e33852 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -983,6 +983,47 @@ out: return ret; } static DEVICE_ATTR(num_grat_arp, S_IRUGO | S_IWUSR, bonding_show_n_grat_arp, bonding_store_n_grat_arp); + +/* + * Show and set the number of unsolicted NA's to send after a failover event. + */ +static ssize_t bonding_show_n_unsol_na(struct device *d, + struct device_attribute *attr, + char *buf) +{ + struct bonding *bond = to_bond(d); + + return sprintf(buf, "%d\n", bond->params.num_unsol_na); +} + +static ssize_t bonding_store_n_unsol_na(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(d); + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no num_unsol_na value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if (new_value < 0 || new_value > 255) { + printk(KERN_ERR DRV_NAME + ": %s: Invalid num_unsol_na value %d not in range 0-255; rejected.\n", + bond->dev->name, new_value); + ret = -EINVAL; + goto out; + } else { + bond->params.num_unsol_na = new_value; + } +out: + return ret; +} +static DEVICE_ATTR(num_unsol_na, S_IRUGO | S_IWUSR, bonding_show_n_unsol_na, bonding_store_n_unsol_na); + /* * Show and set the MII monitor interval. There are two tricky bits * here. First, if MII monitoring is activated, then we must disable @@ -1420,6 +1461,7 @@ static struct attribute *per_bond_attrs[] = { &dev_attr_lacp_rate.attr, &dev_attr_xmit_hash_policy.attr, &dev_attr_num_grat_arp.attr, + &dev_attr_num_unsol_na.attr, &dev_attr_miimon.attr, &dev_attr_primary.attr, &dev_attr_use_carrier.attr, diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index ffb668dd6d3b..0491c7c2645b 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -19,16 +19,19 @@ #include #include #include +#include #include "bond_3ad.h" #include "bond_alb.h" -#define DRV_VERSION "3.3.0" -#define DRV_RELDATE "June 10, 2008" +#define DRV_VERSION "3.4.0" +#define DRV_RELDATE "October 7, 2008" #define DRV_NAME "bonding" #define DRV_DESCRIPTION "Ethernet Channel Bonding Driver" #define BOND_MAX_ARP_TARGETS 16 +extern struct list_head bond_dev_list; + #ifdef BONDING_DEBUG #define dprintk(fmt, args...) \ printk(KERN_DEBUG \ @@ -126,6 +129,7 @@ struct bond_params { int xmit_policy; int miimon; int num_grat_arp; + int num_unsol_na; int arp_interval; int arp_validate; int use_carrier; @@ -148,6 +152,9 @@ struct vlan_entry { struct list_head vlan_list; __be32 vlan_ip; unsigned short vlan_id; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + struct in6_addr vlan_ipv6; +#endif }; struct slave { @@ -195,6 +202,7 @@ struct bonding { rwlock_t curr_slave_lock; s8 kill_timers; s8 send_grat_arp; + s8 send_unsol_na; s8 setup_by_slave; struct net_device_stats stats; #ifdef CONFIG_PROC_FS @@ -218,6 +226,9 @@ struct bonding { struct delayed_work arp_work; struct delayed_work alb_work; struct delayed_work ad_work; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + struct in6_addr master_ipv6; +#endif }; /** @@ -341,5 +352,24 @@ extern struct bond_parm_tbl xmit_hashtype_tbl[]; extern struct bond_parm_tbl arp_validate_tbl[]; extern struct bond_parm_tbl fail_over_mac_tbl[]; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) +void bond_send_unsolicited_na(struct bonding *bond); +void bond_register_ipv6_notifier(void); +void bond_unregister_ipv6_notifier(void); +#else +static inline void bond_send_unsolicited_na(struct bonding *bond) +{ + return; +} +static inline void bond_register_ipv6_notifier(void) +{ + return; +} +static inline void bond_unregister_ipv6_notifier(void) +{ + return; +} +#endif + #endif /* _LINUX_BONDING_H */ diff --git a/include/net/ndisc.h b/include/net/ndisc.h index 11dd0137c6a5..ce532f2222ce 100644 --- a/include/net/ndisc.h +++ b/include/net/ndisc.h @@ -108,6 +108,20 @@ extern void ndisc_send_redirect(struct sk_buff *skb, extern int ndisc_mc_map(struct in6_addr *addr, char *buf, struct net_device *dev, int dir); +extern struct sk_buff *ndisc_build_skb(struct net_device *dev, + const struct in6_addr *daddr, + const struct in6_addr *saddr, + struct icmp6hdr *icmp6h, + const struct in6_addr *target, + int llinfo); + +extern void ndisc_send_skb(struct sk_buff *skb, + struct net_device *dev, + struct neighbour *neigh, + const struct in6_addr *daddr, + const struct in6_addr *saddr, + struct icmp6hdr *icmp6h); + /* diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 2a6752dae09d..fbf451c0d77a 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -437,38 +437,20 @@ static void pndisc_destructor(struct pneigh_entry *n) ipv6_dev_mc_dec(dev, &maddr); } -/* - * Send a Neighbour Advertisement - */ -static void __ndisc_send(struct net_device *dev, - struct neighbour *neigh, - const struct in6_addr *daddr, - const struct in6_addr *saddr, - struct icmp6hdr *icmp6h, const struct in6_addr *target, - int llinfo) +struct sk_buff *ndisc_build_skb(struct net_device *dev, + const struct in6_addr *daddr, + const struct in6_addr *saddr, + struct icmp6hdr *icmp6h, + const struct in6_addr *target, + int llinfo) { - struct flowi fl; - struct dst_entry *dst; struct net *net = dev_net(dev); struct sock *sk = net->ipv6.ndisc_sk; struct sk_buff *skb; struct icmp6hdr *hdr; - struct inet6_dev *idev; int len; int err; - u8 *opt, type; - - type = icmp6h->icmp6_type; - - icmpv6_flow_init(sk, &fl, type, saddr, daddr, dev->ifindex); - - dst = icmp6_dst_alloc(dev, neigh, daddr); - if (!dst) - return; - - err = xfrm_lookup(&dst, &fl, NULL, 0); - if (err < 0) - return; + u8 *opt; if (!dev->addr_len) llinfo = 0; @@ -485,8 +467,7 @@ static void __ndisc_send(struct net_device *dev, ND_PRINTK0(KERN_ERR "ICMPv6 ND: %s() failed to allocate an skb.\n", __func__); - dst_release(dst); - return; + return NULL; } skb_reserve(skb, LL_RESERVED_SPACE(dev)); @@ -513,6 +494,42 @@ static void __ndisc_send(struct net_device *dev, csum_partial((__u8 *) hdr, len, 0)); + return skb; +} + +EXPORT_SYMBOL(ndisc_build_skb); + +void ndisc_send_skb(struct sk_buff *skb, + struct net_device *dev, + struct neighbour *neigh, + const struct in6_addr *daddr, + const struct in6_addr *saddr, + struct icmp6hdr *icmp6h) +{ + struct flowi fl; + struct dst_entry *dst; + struct net *net = dev_net(dev); + struct sock *sk = net->ipv6.ndisc_sk; + struct inet6_dev *idev; + int err; + u8 type; + + type = icmp6h->icmp6_type; + + icmpv6_flow_init(sk, &fl, type, saddr, daddr, dev->ifindex); + + dst = icmp6_dst_alloc(dev, neigh, daddr); + if (!dst) { + kfree_skb(skb); + return; + } + + err = xfrm_lookup(&dst, &fl, NULL, 0); + if (err < 0) { + kfree_skb(skb); + return; + } + skb->dst = dst; idev = in6_dev_get(dst->dev); @@ -529,6 +546,27 @@ static void __ndisc_send(struct net_device *dev, in6_dev_put(idev); } +EXPORT_SYMBOL(ndisc_send_skb); + +/* + * Send a Neighbour Discover packet + */ +static void __ndisc_send(struct net_device *dev, + struct neighbour *neigh, + const struct in6_addr *daddr, + const struct in6_addr *saddr, + struct icmp6hdr *icmp6h, const struct in6_addr *target, + int llinfo) +{ + struct sk_buff *skb; + + skb = ndisc_build_skb(dev, daddr, saddr, icmp6h, target, llinfo); + if (!skb) + return; + + ndisc_send_skb(skb, dev, neigh, daddr, saddr, icmp6h); +} + static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh, const struct in6_addr *daddr, const struct in6_addr *solicited_addr, -- cgit v1.2.3 From fd989c83325cb34795bc4d4aa6b13c06f90eac99 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Tue, 4 Nov 2008 17:51:16 -0800 Subject: bonding: alternate agg selection policies for 802.3ad This patch implements alternative aggregator selection policies for 802.3ad. The existing policy, now termed "stable," selects the active aggregator by greatest bandwidth, and only reselects a new aggregator if the active aggregator is entirely disabled (no more ports or all ports down). This patch adds two new policies: bandwidth and count, selecting the active aggregator by total bandwidth (like the stable policy) or by the number of ports in the aggregator, respectively. These two policies also differ from the stable policy in that they will reselect the active aggregator when availability-related changes occur in the bond (e.g., link state change). This permits "gang failover" within 802.3ad, allowing redundant aggregators along parallel paths to always maintain the "best" aggregator as the active aggregator (rather than having to wait for the active to entirely fail). This patch also updates the driver version to 3.5.0. Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- Documentation/networking/bonding.txt | 42 +++++ drivers/net/bonding/bond_3ad.c | 326 ++++++++++++++++++++++------------- drivers/net/bonding/bond_3ad.h | 10 +- drivers/net/bonding/bond_main.c | 30 ++++ drivers/net/bonding/bond_sysfs.c | 49 ++++++ drivers/net/bonding/bonding.h | 5 +- 6 files changed, 333 insertions(+), 129 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 3f4d0fae7081..5ede7473b425 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -194,6 +194,48 @@ or, for backwards compatibility, the option value. E.g., The parameters are as follows: +ad_select + + Specifies the 802.3ad aggregation selection logic to use. The + possible values and their effects are: + + stable or 0 + + The active aggregator is chosen by largest aggregate + bandwidth. + + Reselection of the active aggregator occurs only when all + slaves of the active aggregator are down or the active + aggregator has no slaves. + + This is the default value. + + bandwidth or 1 + + The active aggregator is chosen by largest aggregate + bandwidth. Reselection occurs if: + + - A slave is added to or removed from the bond + + - Any slave's link state changes + + - Any slave's 802.3ad association state changes + + - The bond's adminstrative state changes to up + + count or 2 + + The active aggregator is chosen by the largest number of + ports (slaves). Reselection occurs as described under the + "bandwidth" setting, above. + + The bandwidth and count selection policies permit failover of + 802.3ad aggregations when partial failure of the active aggregator + occurs. This keeps the aggregator with the highest availability + (either in bandwidth or in number of ports) active at all times. + + This option was added in bonding version 3.4.0. + arp_interval Specifies the ARP link monitoring frequency in milliseconds. diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 6106660a4a44..ba1372f2f144 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -236,6 +237,17 @@ static inline struct aggregator *__get_next_agg(struct aggregator *aggregator) return &(SLAVE_AD_INFO(slave->next).aggregator); } +/* + * __agg_has_partner + * + * Return nonzero if aggregator has a partner (denoted by a non-zero ether + * address for the partner). Return 0 if not. + */ +static inline int __agg_has_partner(struct aggregator *agg) +{ + return !is_zero_ether_addr(agg->partner_system.mac_addr_value); +} + /** * __disable_port - disable the port's slave * @port: the port we're looking at @@ -274,14 +286,14 @@ static inline int __port_is_enabled(struct port *port) * __get_agg_selection_mode - get the aggregator selection mode * @port: the port we're looking at * - * Get the aggregator selection mode. Can be %BANDWIDTH or %COUNT. + * Get the aggregator selection mode. Can be %STABLE, %BANDWIDTH or %COUNT. */ static inline u32 __get_agg_selection_mode(struct port *port) { struct bonding *bond = __get_bond_by_port(port); if (bond == NULL) { - return AD_BANDWIDTH; + return BOND_AD_STABLE; } return BOND_AD_INFO(bond).agg_select_mode; @@ -1414,9 +1426,82 @@ static void ad_port_selection_logic(struct port *port) // else set ready=FALSE in all aggregator's ports __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); - if (!__check_agg_selection_timer(port) && (aggregator = __get_first_agg(port))) { - ad_agg_selection_logic(aggregator); + aggregator = __get_first_agg(port); + ad_agg_selection_logic(aggregator); +} + +/* + * Decide if "agg" is a better choice for the new active aggregator that + * the current best, according to the ad_select policy. + */ +static struct aggregator *ad_agg_selection_test(struct aggregator *best, + struct aggregator *curr) +{ + /* + * 0. If no best, select current. + * + * 1. If the current agg is not individual, and the best is + * individual, select current. + * + * 2. If current agg is individual and the best is not, keep best. + * + * 3. Therefore, current and best are both individual or both not + * individual, so: + * + * 3a. If current agg partner replied, and best agg partner did not, + * select current. + * + * 3b. If current agg partner did not reply and best agg partner + * did reply, keep best. + * + * 4. Therefore, current and best both have partner replies or + * both do not, so perform selection policy: + * + * BOND_AD_COUNT: Select by count of ports. If count is equal, + * select by bandwidth. + * + * BOND_AD_STABLE, BOND_AD_BANDWIDTH: Select by bandwidth. + */ + if (!best) + return curr; + + if (!curr->is_individual && best->is_individual) + return curr; + + if (curr->is_individual && !best->is_individual) + return best; + + if (__agg_has_partner(curr) && !__agg_has_partner(best)) + return curr; + + if (!__agg_has_partner(curr) && __agg_has_partner(best)) + return best; + + switch (__get_agg_selection_mode(curr->lag_ports)) { + case BOND_AD_COUNT: + if (curr->num_of_ports > best->num_of_ports) + return curr; + + if (curr->num_of_ports < best->num_of_ports) + return best; + + /*FALLTHROUGH*/ + case BOND_AD_STABLE: + case BOND_AD_BANDWIDTH: + if (__get_agg_bandwidth(curr) > __get_agg_bandwidth(best)) + return curr; + + break; + + default: + printk(KERN_WARNING DRV_NAME + ": %s: Impossible agg select mode %d\n", + curr->slave->dev->master->name, + __get_agg_selection_mode(curr->lag_ports)); + break; } + + return best; } /** @@ -1424,156 +1509,138 @@ static void ad_port_selection_logic(struct port *port) * @aggregator: the aggregator we're looking at * * It is assumed that only one aggregator may be selected for a team. - * The logic of this function is to select (at first time) the aggregator with - * the most ports attached to it, and to reselect the active aggregator only if - * the previous aggregator has no more ports related to it. + * + * The logic of this function is to select the aggregator according to + * the ad_select policy: + * + * BOND_AD_STABLE: select the aggregator with the most ports attached to + * it, and to reselect the active aggregator only if the previous + * aggregator has no more ports related to it. + * + * BOND_AD_BANDWIDTH: select the aggregator with the highest total + * bandwidth, and reselect whenever a link state change takes place or the + * set of slaves in the bond changes. + * + * BOND_AD_COUNT: select the aggregator with largest number of ports + * (slaves), and reselect whenever a link state change takes place or the + * set of slaves in the bond changes. * * FIXME: this function MUST be called with the first agg in the bond, or * __get_active_agg() won't work correctly. This function should be better * called with the bond itself, and retrieve the first agg from it. */ -static void ad_agg_selection_logic(struct aggregator *aggregator) +static void ad_agg_selection_logic(struct aggregator *agg) { - struct aggregator *best_aggregator = NULL, *active_aggregator = NULL; - struct aggregator *last_active_aggregator = NULL, *origin_aggregator; + struct aggregator *best, *active, *origin; struct port *port; - u16 num_of_aggs=0; - origin_aggregator = aggregator; + origin = agg; - //get current active aggregator - last_active_aggregator = __get_active_agg(aggregator); + active = __get_active_agg(agg); + best = active; - // search for the aggregator with the most ports attached to it. do { - // count how many candidate lag's we have - if (aggregator->lag_ports) { - num_of_aggs++; - } - if (aggregator->is_active && !aggregator->is_individual && // if current aggregator is the active aggregator - MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(null_mac_addr))) { // and partner answers to 802.3ad PDUs - if (aggregator->num_of_ports) { // if any ports attached to the current aggregator - best_aggregator=NULL; // disregard the best aggregator that was chosen by now - break; // stop the selection of other aggregator if there are any ports attached to this active aggregator - } else { // no ports attached to this active aggregator - aggregator->is_active = 0; // mark this aggregator as not active anymore + agg->is_active = 0; + + if (agg->num_of_ports) + best = ad_agg_selection_test(best, agg); + + } while ((agg = __get_next_agg(agg))); + + if (best && + __get_agg_selection_mode(best->lag_ports) == BOND_AD_STABLE) { + /* + * For the STABLE policy, don't replace the old active + * aggregator if it's still active (it has an answering + * partner) or if both the best and active don't have an + * answering partner. + */ + if (active && active->lag_ports && + active->lag_ports->is_enabled && + (__agg_has_partner(active) || + (!__agg_has_partner(active) && !__agg_has_partner(best)))) { + if (!(!active->actor_oper_aggregator_key && + best->actor_oper_aggregator_key)) { + best = NULL; + active->is_active = 1; } } - if (aggregator->num_of_ports) { // if any ports attached - if (best_aggregator) { // if there is a candidte aggregator - //The reasons for choosing new best aggregator: - // 1. if current agg is NOT individual and the best agg chosen so far is individual OR - // current and best aggs are both individual or both not individual, AND - // 2a. current agg partner reply but best agg partner do not reply OR - // 2b. current agg partner reply OR current agg partner do not reply AND best agg partner also do not reply AND - // current has more ports/bandwidth, or same amount of ports but current has faster ports, THEN - // current agg become best agg so far - - //if current agg is NOT individual and the best agg chosen so far is individual change best_aggregator - if (!aggregator->is_individual && best_aggregator->is_individual) { - best_aggregator=aggregator; - } - // current and best aggs are both individual or both not individual - else if ((aggregator->is_individual && best_aggregator->is_individual) || - (!aggregator->is_individual && !best_aggregator->is_individual)) { - // current and best aggs are both individual or both not individual AND - // current agg partner reply but best agg partner do not reply - if ((MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(null_mac_addr)) && - !MAC_ADDRESS_COMPARE(&(best_aggregator->partner_system), &(null_mac_addr)))) { - best_aggregator=aggregator; - } - // current agg partner reply OR current agg partner do not reply AND best agg partner also do not reply - else if (! (!MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(null_mac_addr)) && - MAC_ADDRESS_COMPARE(&(best_aggregator->partner_system), &(null_mac_addr)))) { - if ((__get_agg_selection_mode(aggregator->lag_ports) == AD_BANDWIDTH)&& - (__get_agg_bandwidth(aggregator) > __get_agg_bandwidth(best_aggregator))) { - best_aggregator=aggregator; - } else if (__get_agg_selection_mode(aggregator->lag_ports) == AD_COUNT) { - if (((aggregator->num_of_ports > best_aggregator->num_of_ports) && - (aggregator->actor_oper_aggregator_key & AD_SPEED_KEY_BITS))|| - ((aggregator->num_of_ports == best_aggregator->num_of_ports) && - ((u16)(aggregator->actor_oper_aggregator_key & AD_SPEED_KEY_BITS) > - (u16)(best_aggregator->actor_oper_aggregator_key & AD_SPEED_KEY_BITS)))) { - best_aggregator=aggregator; - } - } - } - } - } else { - best_aggregator=aggregator; - } - } - aggregator->is_active = 0; // mark all aggregators as not active anymore - } while ((aggregator = __get_next_agg(aggregator))); - - // if we have new aggregator selected, don't replace the old aggregator if it has an answering partner, - // or if both old aggregator and new aggregator don't have answering partner - if (best_aggregator) { - if (last_active_aggregator && last_active_aggregator->lag_ports && last_active_aggregator->lag_ports->is_enabled && - (MAC_ADDRESS_COMPARE(&(last_active_aggregator->partner_system), &(null_mac_addr)) || // partner answers OR - (!MAC_ADDRESS_COMPARE(&(last_active_aggregator->partner_system), &(null_mac_addr)) && // both old and new - !MAC_ADDRESS_COMPARE(&(best_aggregator->partner_system), &(null_mac_addr)))) // partner do not answer - ) { - // if new aggregator has link, and old aggregator does not, replace old aggregator.(do nothing) - // -> don't replace otherwise. - if (!(!last_active_aggregator->actor_oper_aggregator_key && best_aggregator->actor_oper_aggregator_key)) { - best_aggregator=NULL; - last_active_aggregator->is_active = 1; // don't replace good old aggregator + } - } - } + if (best && (best == active)) { + best = NULL; + active->is_active = 1; } // if there is new best aggregator, activate it - if (best_aggregator) { - for (aggregator = __get_first_agg(best_aggregator->lag_ports); - aggregator; - aggregator = __get_next_agg(aggregator)) { - - dprintk("Agg=%d; Ports=%d; a key=%d; p key=%d; Indiv=%d; Active=%d\n", - aggregator->aggregator_identifier, aggregator->num_of_ports, - aggregator->actor_oper_aggregator_key, aggregator->partner_oper_aggregator_key, - aggregator->is_individual, aggregator->is_active); + if (best) { + dprintk("best Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n", + best->aggregator_identifier, best->num_of_ports, + best->actor_oper_aggregator_key, + best->partner_oper_aggregator_key, + best->is_individual, best->is_active); + dprintk("best ports %p slave %p %s\n", + best->lag_ports, best->slave, + best->slave ? best->slave->dev->name : "NULL"); + + for (agg = __get_first_agg(best->lag_ports); agg; + agg = __get_next_agg(agg)) { + + dprintk("Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n", + agg->aggregator_identifier, agg->num_of_ports, + agg->actor_oper_aggregator_key, + agg->partner_oper_aggregator_key, + agg->is_individual, agg->is_active); } // check if any partner replys - if (best_aggregator->is_individual) { - printk(KERN_WARNING DRV_NAME ": %s: Warning: No 802.3ad response from " - "the link partner for any adapters in the bond\n", - best_aggregator->slave->dev->master->name); - } - - // check if there are more than one aggregator - if (num_of_aggs > 1) { - dprintk("Warning: More than one Link Aggregation Group was " - "found in the bond. Only one group will function in the bond\n"); + if (best->is_individual) { + printk(KERN_WARNING DRV_NAME ": %s: Warning: No 802.3ad" + " response from the link partner for any" + " adapters in the bond\n", + best->slave->dev->master->name); } - best_aggregator->is_active = 1; - dprintk("LAG %d choosed as the active LAG\n", best_aggregator->aggregator_identifier); - dprintk("Agg=%d; Ports=%d; a key=%d; p key=%d; Indiv=%d; Active=%d\n", - best_aggregator->aggregator_identifier, best_aggregator->num_of_ports, - best_aggregator->actor_oper_aggregator_key, best_aggregator->partner_oper_aggregator_key, - best_aggregator->is_individual, best_aggregator->is_active); + best->is_active = 1; + dprintk("LAG %d chosen as the active LAG\n", + best->aggregator_identifier); + dprintk("Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n", + best->aggregator_identifier, best->num_of_ports, + best->actor_oper_aggregator_key, + best->partner_oper_aggregator_key, + best->is_individual, best->is_active); // disable the ports that were related to the former active_aggregator - if (last_active_aggregator) { - for (port=last_active_aggregator->lag_ports; port; port=port->next_port_in_aggregator) { + if (active) { + for (port = active->lag_ports; port; + port = port->next_port_in_aggregator) { __disable_port(port); } } } - // if the selected aggregator is of join individuals(partner_system is NULL), enable their ports - active_aggregator = __get_active_agg(origin_aggregator); + /* + * if the selected aggregator is of join individuals + * (partner_system is NULL), enable their ports + */ + active = __get_active_agg(origin); - if (active_aggregator) { - if (!MAC_ADDRESS_COMPARE(&(active_aggregator->partner_system), &(null_mac_addr))) { - for (port=active_aggregator->lag_ports; port; port=port->next_port_in_aggregator) { + if (active) { + if (!__agg_has_partner(active)) { + for (port = active->lag_ports; port; + port = port->next_port_in_aggregator) { __enable_port(port); } } } + + if (origin->slave) { + struct bonding *bond; + + bond = bond_get_bond_by_slave(origin->slave); + if (bond) + bond_3ad_set_carrier(bond); + } } /** @@ -1830,6 +1897,19 @@ static void ad_initialize_lacpdu(struct lacpdu *lacpdu) // Check aggregators status in team every T seconds #define AD_AGGREGATOR_SELECTION_TIMER 8 +/* + * bond_3ad_initiate_agg_selection(struct bonding *bond) + * + * Set the aggregation selection timer, to initiate an agg selection in + * the very near future. Called during first initialization, and during + * any down to up transitions of the bond. + */ +void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout) +{ + BOND_AD_INFO(bond).agg_select_timer = timeout; + BOND_AD_INFO(bond).agg_select_mode = bond->params.ad_select; +} + static u16 aggregator_identifier; /** @@ -1854,9 +1934,9 @@ void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution, int lacp_fas // initialize how many times this module is called in one second(should be about every 100ms) ad_ticks_per_sec = tick_resolution; - // initialize the aggregator selection timer(to activate an aggregation selection after initialize) - BOND_AD_INFO(bond).agg_select_timer = (AD_AGGREGATOR_SELECTION_TIMER * ad_ticks_per_sec); - BOND_AD_INFO(bond).agg_select_mode = AD_BANDWIDTH; + bond_3ad_initiate_agg_selection(bond, + AD_AGGREGATOR_SELECTION_TIMER * + ad_ticks_per_sec); } } diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h index b5ee45f6d55a..a803fe05f63e 100644 --- a/drivers/net/bonding/bond_3ad.h +++ b/drivers/net/bonding/bond_3ad.h @@ -42,10 +42,11 @@ typedef struct mac_addr { u8 mac_addr_value[ETH_ALEN]; } mac_addr_t; -typedef enum { - AD_BANDWIDTH = 0, - AD_COUNT -} agg_selection_t; +enum { + BOND_AD_STABLE = 0, + BOND_AD_BANDWIDTH = 1, + BOND_AD_COUNT = 2, +}; // rx machine states(43.4.11 in the 802.3ad standard) typedef enum { @@ -277,6 +278,7 @@ void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution, int lacp_fas int bond_3ad_bind_slave(struct slave *slave); void bond_3ad_unbind_slave(struct slave *slave); void bond_3ad_state_machine_handler(struct work_struct *); +void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout); void bond_3ad_adapter_speed_changed(struct slave *slave); void bond_3ad_adapter_duplex_changed(struct slave *slave); void bond_3ad_handle_link_change(struct slave *slave, char link); diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 798d98ce2d97..02de3e031237 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -97,6 +97,7 @@ static int use_carrier = 1; static char *mode = NULL; static char *primary = NULL; static char *lacp_rate = NULL; +static char *ad_select = NULL; static char *xmit_hash_policy = NULL; static int arp_interval = BOND_LINK_ARP_INTERV; static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, }; @@ -130,6 +131,8 @@ MODULE_PARM_DESC(primary, "Primary network device to use"); module_param(lacp_rate, charp, 0); MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner " "(slow/fast)"); +module_param(ad_select, charp, 0); +MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic: stable (0, default), bandwidth (1), count (2)"); module_param(xmit_hash_policy, charp, 0); MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method: 0 for layer 2 (default)" ", 1 for layer 3+4"); @@ -200,6 +203,13 @@ struct bond_parm_tbl fail_over_mac_tbl[] = { { NULL, -1}, }; +struct bond_parm_tbl ad_select_tbl[] = { +{ "stable", BOND_AD_STABLE}, +{ "bandwidth", BOND_AD_BANDWIDTH}, +{ "count", BOND_AD_COUNT}, +{ NULL, -1}, +}; + /*-------------------------- Forward declarations ---------------------------*/ static void bond_send_gratuitous_arp(struct bonding *bond); @@ -3318,6 +3328,8 @@ static void bond_info_show_master(struct seq_file *seq) seq_puts(seq, "\n802.3ad info\n"); seq_printf(seq, "LACP rate: %s\n", (bond->params.lacp_fast) ? "fast" : "slow"); + seq_printf(seq, "Aggregator selection policy (ad_select): %s\n", + ad_select_tbl[bond->params.ad_select].modename); if (bond_3ad_get_active_agg_info(bond, &ad_info)) { seq_printf(seq, "bond %s has no active aggregator\n", @@ -3824,6 +3836,7 @@ static int bond_open(struct net_device *bond_dev) queue_delayed_work(bond->wq, &bond->ad_work, 0); /* register to receive LACPDUs */ bond_register_lacpdu(bond); + bond_3ad_initiate_agg_selection(bond, 1); } return 0; @@ -4763,6 +4776,23 @@ static int bond_check_params(struct bond_params *params) } } + if (ad_select) { + params->ad_select = bond_parse_parm(ad_select, ad_select_tbl); + if (params->ad_select == -1) { + printk(KERN_ERR DRV_NAME + ": Error: Invalid ad_select \"%s\"\n", + ad_select == NULL ? "NULL" : ad_select); + return -EINVAL; + } + + if (bond_mode != BOND_MODE_8023AD) { + printk(KERN_WARNING DRV_NAME + ": ad_select param only affects 802.3ad mode\n"); + } + } else { + params->ad_select = BOND_AD_STABLE; + } + if (max_bonds < 0 || max_bonds > INT_MAX) { printk(KERN_WARNING DRV_NAME ": Warning: max_bonds (%d) not in range %d-%d, so it " diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 8788e3e33852..aaf2927b5c38 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -48,6 +48,7 @@ extern struct list_head bond_dev_list; extern struct bond_params bonding_defaults; extern struct bond_parm_tbl bond_mode_tbl[]; extern struct bond_parm_tbl bond_lacp_tbl[]; +extern struct bond_parm_tbl ad_select_tbl[]; extern struct bond_parm_tbl xmit_hashtype_tbl[]; extern struct bond_parm_tbl arp_validate_tbl[]; extern struct bond_parm_tbl fail_over_mac_tbl[]; @@ -944,6 +945,53 @@ out: } static DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR, bonding_show_lacp, bonding_store_lacp); +static ssize_t bonding_show_ad_select(struct device *d, + struct device_attribute *attr, + char *buf) +{ + struct bonding *bond = to_bond(d); + + return sprintf(buf, "%s %d\n", + ad_select_tbl[bond->params.ad_select].modename, + bond->params.ad_select); +} + + +static ssize_t bonding_store_ad_select(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(d); + + if (bond->dev->flags & IFF_UP) { + printk(KERN_ERR DRV_NAME + ": %s: Unable to update ad_select because interface " + "is up.\n", bond->dev->name); + ret = -EPERM; + goto out; + } + + new_value = bond_parse_parm(buf, ad_select_tbl); + + if (new_value != -1) { + bond->params.ad_select = new_value; + printk(KERN_INFO DRV_NAME + ": %s: Setting ad_select to %s (%d).\n", + bond->dev->name, ad_select_tbl[new_value].modename, + new_value); + } else { + printk(KERN_ERR DRV_NAME + ": %s: Ignoring invalid ad_select value %.*s.\n", + bond->dev->name, (int)strlen(buf) - 1, buf); + ret = -EINVAL; + } +out: + return ret; +} + +static DEVICE_ATTR(ad_select, S_IRUGO | S_IWUSR, bonding_show_ad_select, bonding_store_ad_select); + /* * Show and set the number of grat ARP to send after a failover event. */ @@ -1459,6 +1507,7 @@ static struct attribute *per_bond_attrs[] = { &dev_attr_downdelay.attr, &dev_attr_updelay.attr, &dev_attr_lacp_rate.attr, + &dev_attr_ad_select.attr, &dev_attr_xmit_hash_policy.attr, &dev_attr_num_grat_arp.attr, &dev_attr_num_unsol_na.attr, diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 0491c7c2645b..b5eb8e65b309 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -23,8 +23,8 @@ #include "bond_3ad.h" #include "bond_alb.h" -#define DRV_VERSION "3.4.0" -#define DRV_RELDATE "October 7, 2008" +#define DRV_VERSION "3.5.0" +#define DRV_RELDATE "November 4, 2008" #define DRV_NAME "bonding" #define DRV_DESCRIPTION "Ethernet Channel Bonding Driver" @@ -137,6 +137,7 @@ struct bond_params { int updelay; int downdelay; int lacp_fast; + int ad_select; char primary[IFNAMSIZ]; __be32 arp_targets[BOND_MAX_ARP_TARGETS]; }; -- cgit v1.2.3 From 90080bf4b803efbc9b9cd3a7ed1639f1e036238e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Nov 2008 14:37:25 -0800 Subject: sched, documentation: update scheduler header file paths Impact: update documentation Update Documentation/scheduler/ files to reflect changed header files locations. Signed-off-by: Randy Dunlap Signed-off-by: Ingo Molnar --- Documentation/scheduler/sched-arch.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/scheduler/sched-arch.txt b/Documentation/scheduler/sched-arch.txt index 941615a9769b..d43dbcbd163b 100644 --- a/Documentation/scheduler/sched-arch.txt +++ b/Documentation/scheduler/sched-arch.txt @@ -8,7 +8,7 @@ Context switch By default, the switch_to arch function is called with the runqueue locked. This is usually not a problem unless switch_to may need to take the runqueue lock. This is usually due to a wake up operation in -the context switch. See include/asm-ia64/system.h for an example. +the context switch. See arch/ia64/include/asm/system.h for an example. To request the scheduler call switch_to with the runqueue unlocked, you must `#define __ARCH_WANT_UNLOCKED_CTXSW` in a header file @@ -23,7 +23,7 @@ disabled. Interrupts may be enabled over the call if it is likely to introduce a significant interrupt latency by adding the line `#define __ARCH_WANT_INTERRUPTS_ON_CTXSW` in the same place as for unlocked context switches. This define also implies -`__ARCH_WANT_UNLOCKED_CTXSW`. See include/asm-arm/system.h for an +`__ARCH_WANT_UNLOCKED_CTXSW`. See arch/arm/include/asm/system.h for an example. -- cgit v1.2.3 From 934352f214b3251eb0793c1209d346595a661d80 Mon Sep 17 00:00:00 2001 From: Bharata B Rao Date: Mon, 10 Nov 2008 20:41:13 +0530 Subject: sched: add hierarchical accounting to cpu accounting controller Impact: improve CPU time accounting of tasks under the cpu accounting controller Add hierarchical accounting to cpu accounting controller and include cpuacct documentation. Currently, while charging the task's cputime to its accounting group, the accounting group hierarchy isn't updated. This patch charges the cputime of a task to its accounting group and all its parent accounting groups. Reported-by: Srivatsa Vaddagiri Signed-off-by: Bharata B Rao Reviewed-by: Paul Menage Acked-by: Balbir Singh Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- Documentation/controllers/cpuacct.txt | 32 ++++++++++++++++++++++++++++++++ kernel/sched.c | 12 +++++++++--- 2 files changed, 41 insertions(+), 3 deletions(-) create mode 100644 Documentation/controllers/cpuacct.txt (limited to 'Documentation') diff --git a/Documentation/controllers/cpuacct.txt b/Documentation/controllers/cpuacct.txt new file mode 100644 index 000000000000..bb775fbe43d7 --- /dev/null +++ b/Documentation/controllers/cpuacct.txt @@ -0,0 +1,32 @@ +CPU Accounting Controller +------------------------- + +The CPU accounting controller is used to group tasks using cgroups and +account the CPU usage of these groups of tasks. + +The CPU accounting controller supports multi-hierarchy groups. An accounting +group accumulates the CPU usage of all of its child groups and the tasks +directly present in its group. + +Accounting groups can be created by first mounting the cgroup filesystem. + +# mkdir /cgroups +# mount -t cgroup -ocpuacct none /cgroups + +With the above step, the initial or the parent accounting group +becomes visible at /cgroups. At bootup, this group includes all the +tasks in the system. /cgroups/tasks lists the tasks in this cgroup. +/cgroups/cpuacct.usage gives the CPU time (in nanoseconds) obtained by +this group which is essentially the CPU time obtained by all the tasks +in the system. + +New accounting groups can be created under the parent group /cgroups. + +# cd /cgroups +# mkdir g1 +# echo $$ > g1 + +The above steps create a new group g1 and move the current shell +process (bash) into it. CPU time consumed by this bash and its children +can be obtained from g1/cpuacct.usage and the same is accumulated in +/cgroups/cpuacct.usage also. diff --git a/kernel/sched.c b/kernel/sched.c index 59db86c915f9..ebaf432365f6 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -9196,11 +9196,12 @@ struct cgroup_subsys cpu_cgroup_subsys = { * (balbir@in.ibm.com). */ -/* track cpu usage of a group of tasks */ +/* track cpu usage of a group of tasks and its child groups */ struct cpuacct { struct cgroup_subsys_state css; /* cpuusage holds pointer to a u64-type object on every cpu */ u64 *cpuusage; + struct cpuacct *parent; }; struct cgroup_subsys cpuacct_subsys; @@ -9234,6 +9235,9 @@ static struct cgroup_subsys_state *cpuacct_create( return ERR_PTR(-ENOMEM); } + if (cgrp->parent) + ca->parent = cgroup_ca(cgrp->parent); + return &ca->css; } @@ -9313,14 +9317,16 @@ static int cpuacct_populate(struct cgroup_subsys *ss, struct cgroup *cgrp) static void cpuacct_charge(struct task_struct *tsk, u64 cputime) { struct cpuacct *ca; + int cpu; if (!cpuacct_subsys.active) return; + cpu = task_cpu(tsk); ca = task_ca(tsk); - if (ca) { - u64 *cpuusage = percpu_ptr(ca->cpuusage, task_cpu(tsk)); + for (; ca; ca = ca->parent) { + u64 *cpuusage = percpu_ptr(ca->cpuusage, cpu); *cpuusage += cputime; } } -- cgit v1.2.3 From a4c52791fa8c73e3cffe4a82865edb41e8fe8c3c Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 8 Nov 2008 11:24:57 +0100 Subject: x86, 64-bit: update address space documentation Impact: documentation update Commit a6523748bddd38bcec11431f57502090b6014a96 (paravirt/x86, 64-bit: move __PAGE_OFFSET to leave a space for hypervisor) changed address space without changing the documentation. Change it according to the code change -- direct mapping start: ffff810000000000 => ffff880000000000 which gives 57 TiB, something between 45 and 46 bits. Signed-off-by: Jiri Slaby Signed-off-by: Ingo Molnar --- Documentation/x86/x86_64/mm.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt index efce75097369..29b52b14d0b4 100644 --- a/Documentation/x86/x86_64/mm.txt +++ b/Documentation/x86/x86_64/mm.txt @@ -6,7 +6,7 @@ Virtual memory map with 4 level page tables: 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm hole caused by [48:63] sign extension ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole -ffff810000000000 - ffffc0ffffffffff (=46 bits) direct mapping of all phys. memory +ffff880000000000 - ffffc0ffffffffff (=57 TB) direct mapping of all phys. memory ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB) -- cgit v1.2.3 From 9ee670fd87b7d69c8633b94c42aadcbbcb96f28e Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Tue, 11 Nov 2008 11:49:01 +0900 Subject: x86/doc: spelling fix for grub Impact: documentation fix I met okuji-san (GRUB maintainer) yesterday. He said GRuB isn't correct spelled and he want to fix it. Signed-off-by: KOSAKI Motohiro Signed-off-by: Ingo Molnar --- Documentation/x86/boot.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 83c0033ee9e0..804d9b1a46ef 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -349,7 +349,7 @@ Protocol: 2.00+ 3 SYSLINUX 4 EtherBoot 5 ELILO - 7 GRuB + 7 GRUB 8 U-BOOT 9 Xen A Gujin -- cgit v1.2.3 From d90ebcbfa7f5a8b4e20518c9f94c5c4e4cd3c2e5 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 12 Nov 2008 00:47:26 -0800 Subject: dccp: Query supported CCIDs This provides a data structure to record which CCIDs are locally supported and three accessor functions: - a test function for internal use which is used to validate CCID requests made by the user; - a copy function so that the list can be used for feature-negotiation; - documented getsockopt() support so that the user can query capabilities. The data structure is a table which is filled in at compile-time with the list of available CCIDs (which in turn depends on the Kconfig choices). Using the copy function for cloning the list of supported CCIDs is useful for feature negotiation, since the negotiation is now with the full list of available CCIDs (e.g. {2, 3}) instead of the default value {2}. This means negotiation will not fail if the peer requests to use CCID3 instead of CCID2. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald Signed-off-by: David S. Miller --- Documentation/networking/dccp.txt | 4 ++++ include/linux/dccp.h | 1 + net/dccp/ccid.c | 48 +++++++++++++++++++++++++++++++++++++++ net/dccp/ccid.h | 5 ++++ net/dccp/feat.c | 4 ++++ net/dccp/proto.c | 2 ++ 6 files changed, 64 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index 39131a3c78f8..f0aeb20fa63b 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -57,6 +57,10 @@ can be set before calling bind(). DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet size (application payload size) in bytes, see RFC 4340, section 14. +DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs +supported by the endpoint (see include/linux/dccp.h for symbolic constants). +The caller needs to provide a sufficiently large (> 2) array of type uint8_t. + DCCP_SOCKOPT_SERVER_TIMEWAIT enables the server (listening socket) to hold timewait state when closing the connection (RFC 4340, 8.3). The usual case is that the closing server sends a CloseReq, whereupon the client holds timewait diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 484b8a1fb023..d3ac1bde60b4 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -209,6 +209,7 @@ struct dccp_so_feat { #define DCCP_SOCKOPT_SERVER_TIMEWAIT 6 #define DCCP_SOCKOPT_SEND_CSCOV 10 #define DCCP_SOCKOPT_RECV_CSCOV 11 +#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 #define DCCP_SOCKOPT_CCID_RX_INFO 128 #define DCCP_SOCKOPT_CCID_TX_INFO 192 diff --git a/net/dccp/ccid.c b/net/dccp/ccid.c index 8fe931a3d7a1..647cb0614f84 100644 --- a/net/dccp/ccid.c +++ b/net/dccp/ccid.c @@ -13,6 +13,13 @@ #include "ccid.h" +static u8 builtin_ccids[] = { + DCCPC_CCID2, /* CCID2 is supported by default */ +#if defined(CONFIG_IP_DCCP_CCID3) || defined(CONFIG_IP_DCCP_CCID3_MODULE) + DCCPC_CCID3, +#endif +}; + static struct ccid_operations *ccids[CCID_MAX]; #if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT) static atomic_t ccids_lockct = ATOMIC_INIT(0); @@ -86,6 +93,47 @@ static void ccid_kmem_cache_destroy(struct kmem_cache *slab) } } +/* check that up to @array_len members in @ccid_array are supported */ +bool ccid_support_check(u8 const *ccid_array, u8 array_len) +{ + u8 i, j, found; + + for (i = 0, found = 0; i < array_len; i++, found = 0) { + for (j = 0; !found && j < ARRAY_SIZE(builtin_ccids); j++) + found = (ccid_array[i] == builtin_ccids[j]); + if (!found) + return false; + } + return true; +} + +/** + * ccid_get_builtin_ccids - Provide copy of `builtin' CCID array + * @ccid_array: pointer to copy into + * @array_len: value to return length into + * This function allocates memory - caller must see that it is freed after use. + */ +int ccid_get_builtin_ccids(u8 **ccid_array, u8 *array_len) +{ + *ccid_array = kmemdup(builtin_ccids, sizeof(builtin_ccids), gfp_any()); + if (*ccid_array == NULL) + return -ENOBUFS; + *array_len = ARRAY_SIZE(builtin_ccids); + return 0; +} + +int ccid_getsockopt_builtin_ccids(struct sock *sk, int len, + char __user *optval, int __user *optlen) +{ + if (len < sizeof(builtin_ccids)) + return -EINVAL; + + if (put_user(sizeof(builtin_ccids), optlen) || + copy_to_user(optval, builtin_ccids, sizeof(builtin_ccids))) + return -EFAULT; + return 0; +} + int ccid_register(struct ccid_operations *ccid_ops) { int err = -ENOBUFS; diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h index fdeae7b57319..259f5469d7d0 100644 --- a/net/dccp/ccid.h +++ b/net/dccp/ccid.h @@ -103,6 +103,11 @@ static inline void *ccid_priv(const struct ccid *ccid) return (void *)ccid->ccid_priv; } +extern bool ccid_support_check(u8 const *ccid_array, u8 array_len); +extern int ccid_get_builtin_ccids(u8 **ccid_array, u8 *array_len); +extern int ccid_getsockopt_builtin_ccids(struct sock *sk, int len, + char __user *, int __user *); + extern struct ccid *ccid_new(unsigned char id, struct sock *sk, int rx, gfp_t gfp); diff --git a/net/dccp/feat.c b/net/dccp/feat.c index 192d494a3816..f79fb5e33f5e 100644 --- a/net/dccp/feat.c +++ b/net/dccp/feat.c @@ -342,6 +342,10 @@ static int __feat_register_sp(struct list_head *fn, u8 feat, u8 is_local, !dccp_feat_sp_list_ok(feat, sp_val, sp_len)) return -EINVAL; + /* Avoid negotiating alien CCIDs by only advertising supported ones */ + if (feat == DCCPF_CCID && !ccid_support_check(sp_val, sp_len)) + return -EOPNOTSUPP; + if (dccp_feat_clone_sp_val(&fval, sp_val, sp_len)) return -ENOMEM; diff --git a/net/dccp/proto.c b/net/dccp/proto.c index 01332fe7a99a..b4b10cbd8880 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -649,6 +649,8 @@ static int do_dccp_getsockopt(struct sock *sk, int level, int optname, case DCCP_SOCKOPT_GET_CUR_MPS: val = dp->dccps_mss_cache; break; + case DCCP_SOCKOPT_AVAILABLE_CCIDS: + return ccid_getsockopt_builtin_ccids(sk, len, optval, optlen); case DCCP_SOCKOPT_SERVER_TIMEWAIT: val = dp->dccps_server_timewait; break; -- cgit v1.2.3 From a94c80e78bc9f4493ffc25a02d5d7bcd93c399d0 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 12 Nov 2008 17:52:36 -0500 Subject: ftrace: rename trace_entries to buffer_size_kb Impact: rename of debugfs file trace_entries to buffer_size_kb The original ftrace had fixed size entries, and the number of entries was shown and modified via the file called trace_entries. By converting to the unified trace buffer, we now allow for variable size entries which makes the meaning of trace_entries pointless. Since trace_size might be confused to the size of the trace, this patch names it "buffer_size_kb" (thanks to Arjan van de Ven for this idea). [ mingo@elte.hu: changed from buffer_size to buffer_size_kb ] ( Note, the units are still bytes - the next patch changes that, to keep the wide rename patch separate from the unit-change patch. ) Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- Documentation/ftrace.txt | 18 +++++++++--------- kernel/trace/trace.c | 4 ++-- 2 files changed, 11 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 9cc4d685dde5..a1b58777839b 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -94,7 +94,7 @@ of ftrace. Here is a list of some of the key files: only be recorded if the latency is greater than the value in this file. (in microseconds) - trace_entries: This sets or displays the number of bytes each CPU + buffer_size_kb: This sets or displays the number of bytes each CPU buffer can hold. The tracer buffers are the same size for each CPU. The displayed number is the size of the CPU buffer and not total size of all buffers. The @@ -1299,13 +1299,13 @@ trace entries ------------- Having too much or not enough data can be troublesome in diagnosing -an issue in the kernel. The file trace_entries is used to modify +an issue in the kernel. The file buffer_size_kb is used to modify the size of the internal trace buffers. The number listed is the number of entries that can be recorded per CPU. To know the full size, multiply the number of possible CPUS with the number of entries. - # cat /debug/tracing/trace_entries + # cat /debug/tracing/buffer_size_kb 65620 Note, to modify this, you must have tracing completely disabled. To do that, @@ -1313,8 +1313,8 @@ echo "nop" into the current_tracer. If the current_tracer is not set to "nop", an EINVAL error will be returned. # echo nop > /debug/tracing/current_tracer - # echo 100000 > /debug/tracing/trace_entries - # cat /debug/tracing/trace_entries + # echo 100000 > /debug/tracing/buffer_size_kb + # cat /debug/tracing/buffer_size_kb 100045 @@ -1323,8 +1323,8 @@ are held in individual pages. It allocates the number of pages it takes to fulfill the request. If more entries may fit on the last page then they will be added. - # echo 1 > /debug/tracing/trace_entries - # cat /debug/tracing/trace_entries + # echo 1 > /debug/tracing/buffer_size_kb + # cat /debug/tracing/buffer_size_kb 85 This shows us that 85 entries can fit in a single page. @@ -1332,8 +1332,8 @@ This shows us that 85 entries can fit in a single page. The number of pages which will be allocated is limited to a percentage of available memory. Allocating too much will produce an error. - # echo 1000000000000 > /debug/tracing/trace_entries + # echo 1000000000000 > /debug/tracing/buffer_size_kb -bash: echo: write error: Cannot allocate memory - # cat /debug/tracing/trace_entries + # cat /debug/tracing/buffer_size_kb 85 diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 4bf070bb5272..b42d42056fa4 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3198,11 +3198,11 @@ static __init int tracer_init_debugfs(void) pr_warning("Could not create debugfs " "'trace_pipe' entry\n"); - entry = debugfs_create_file("trace_entries", 0644, d_tracer, + entry = debugfs_create_file("buffer_size_kb", 0644, d_tracer, &global_trace, &tracing_entries_fops); if (!entry) pr_warning("Could not create debugfs " - "'trace_entries' entry\n"); + "'buffer_size_kb' entry\n"); entry = debugfs_create_file("trace_marker", 0220, d_tracer, NULL, &tracing_mark_fops); -- cgit v1.2.3 From 1696b2b0f44a8d42f3e6b1ea90c21790871c04d9 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 13 Nov 2008 00:09:35 -0500 Subject: ftrace: show buffer size in kilobytes Impact: change the units of buffer_size_kb to kilobytes This patch changes the units of the buffer_size_kb file to kilobytes. Reading and writing to the file uses kilobytes as units. To help users to know what units are used, the output of the file now looks like: # cat /debug/tracing/buffer_size_kb 1408 Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- Documentation/ftrace.txt | 22 +++++----------------- kernel/trace/trace.c | 5 ++++- 2 files changed, 9 insertions(+), 18 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index a1b58777839b..6d3fe4cdf921 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -94,10 +94,10 @@ of ftrace. Here is a list of some of the key files: only be recorded if the latency is greater than the value in this file. (in microseconds) - buffer_size_kb: This sets or displays the number of bytes each CPU + buffer_size_kb: This sets or displays the number of kilobytes each CPU buffer can hold. The tracer buffers are the same size for each CPU. The displayed number is the size of the - CPU buffer and not total size of all buffers. The + CPU buffer and not total size of all buffers. The trace buffers are allocated in pages (blocks of memory that the kernel uses for allocation, usually 4 KB in size). If the last page allocated has room for more bytes @@ -1306,28 +1306,16 @@ the full size, multiply the number of possible CPUS with the number of entries. # cat /debug/tracing/buffer_size_kb -65620 +1408 (units kilobytes) Note, to modify this, you must have tracing completely disabled. To do that, echo "nop" into the current_tracer. If the current_tracer is not set to "nop", an EINVAL error will be returned. # echo nop > /debug/tracing/current_tracer - # echo 100000 > /debug/tracing/buffer_size_kb + # echo 10000 > /debug/tracing/buffer_size_kb # cat /debug/tracing/buffer_size_kb -100045 - - -Notice that we echoed in 100,000 but the size is 100,045. The entries -are held in individual pages. It allocates the number of pages it takes -to fulfill the request. If more entries may fit on the last page -then they will be added. - - # echo 1 > /debug/tracing/buffer_size_kb - # cat /debug/tracing/buffer_size_kb -85 - -This shows us that 85 entries can fit in a single page. +10000 (units kilobytes) The number of pages which will be allocated is limited to a percentage of available memory. Allocating too much will produce an error. diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b42d42056fa4..d664aae2e10a 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2905,7 +2905,7 @@ tracing_entries_read(struct file *filp, char __user *ubuf, char buf[64]; int r; - r = sprintf(buf, "%lu\n", tr->entries); + r = sprintf(buf, "%lu\n", tr->entries >> 10); return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); } @@ -2945,6 +2945,9 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, atomic_inc(&max_tr.data[cpu]->disabled); } + /* value is in KB */ + val <<= 10; + if (val != global_trace.entries) { ret = ring_buffer_resize(global_trace.buffer, val); if (ret < 0) { -- cgit v1.2.3 From ee6bce52276c0717ed3e63296e5d9465d339e923 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 12 Nov 2008 17:52:37 -0500 Subject: ftrace: rename iter_ctrl to trace_options Impact: rename file /debug/tracing/iter_ctrl to /debug/tracing/trace_options The original ftrace had a file called "iter_ctrl" that would control the way the output was iterated. But this file grew into a catch all for different trace options. This patch renames the file from iter_ctrl to trace_options to reflect this change. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- Documentation/ftrace.txt | 14 +++++++------- kernel/trace/trace.c | 18 +++++++++--------- 2 files changed, 16 insertions(+), 16 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 6d3fe4cdf921..753f4de4b175 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -82,7 +82,7 @@ of ftrace. Here is a list of some of the key files: tracer is not adding more data, they will display the same information every time they are read. - iter_ctrl: This file lets the user control the amount of data + trace_options: This file lets the user control the amount of data that is displayed in one of the above output files. @@ -316,23 +316,23 @@ The above is mostly meaningful for kernel developers. The rest is the same as the 'trace' file. -iter_ctrl ---------- +trace_options +------------- -The iter_ctrl file is used to control what gets printed in the trace +The trace_options file is used to control what gets printed in the trace output. To see what is available, simply cat the file: - cat /debug/tracing/iter_ctrl + cat /debug/tracing/trace_options print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \ noblock nostacktrace nosched-tree To disable one of the options, echo in the option prepended with "no". - echo noprint-parent > /debug/tracing/iter_ctrl + echo noprint-parent > /debug/tracing/trace_options To enable an option, leave off the "no". - echo sym-offset > /debug/tracing/iter_ctrl + echo sym-offset > /debug/tracing/trace_options Here are the available options: diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index d664aae2e10a..240423a9d1af 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -204,7 +204,7 @@ static DEFINE_MUTEX(trace_types_lock); /* trace_wait is a waitqueue for tasks blocked on trace_poll */ static DECLARE_WAIT_QUEUE_HEAD(trace_wait); -/* trace_flags holds iter_ctrl options */ +/* trace_flags holds trace_options default values */ unsigned long trace_flags = TRACE_ITER_PRINT_PARENT | TRACE_ITER_PRINTK; /** @@ -2411,7 +2411,7 @@ static struct file_operations tracing_cpumask_fops = { }; static ssize_t -tracing_iter_ctrl_read(struct file *filp, char __user *ubuf, +tracing_trace_options_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos) { char *buf; @@ -2448,7 +2448,7 @@ tracing_iter_ctrl_read(struct file *filp, char __user *ubuf, } static ssize_t -tracing_iter_ctrl_write(struct file *filp, const char __user *ubuf, +tracing_trace_options_write(struct file *filp, const char __user *ubuf, size_t cnt, loff_t *ppos) { char buf[64]; @@ -2493,8 +2493,8 @@ tracing_iter_ctrl_write(struct file *filp, const char __user *ubuf, static struct file_operations tracing_iter_fops = { .open = tracing_open_generic, - .read = tracing_iter_ctrl_read, - .write = tracing_iter_ctrl_write, + .read = tracing_trace_options_read, + .write = tracing_trace_options_write, }; static const char readme_msg[] = @@ -2508,9 +2508,9 @@ static const char readme_msg[] = "# echo sched_switch > /debug/tracing/current_tracer\n" "# cat /debug/tracing/current_tracer\n" "sched_switch\n" - "# cat /debug/tracing/iter_ctrl\n" + "# cat /debug/tracing/trace_options\n" "noprint-parent nosym-offset nosym-addr noverbose\n" - "# echo print-parent > /debug/tracing/iter_ctrl\n" + "# echo print-parent > /debug/tracing/trace_options\n" "# echo 1 > /debug/tracing/tracing_enabled\n" "# cat /debug/tracing/trace > /tmp/trace.txt\n" "echo 0 > /debug/tracing/tracing_enabled\n" @@ -3148,10 +3148,10 @@ static __init int tracer_init_debugfs(void) if (!entry) pr_warning("Could not create debugfs 'tracing_enabled' entry\n"); - entry = debugfs_create_file("iter_ctrl", 0644, d_tracer, + entry = debugfs_create_file("trace_options", 0644, d_tracer, NULL, &tracing_iter_fops); if (!entry) - pr_warning("Could not create debugfs 'iter_ctrl' entry\n"); + pr_warning("Could not create debugfs 'trace_options' entry\n"); entry = debugfs_create_file("tracing_cpumask", 0644, d_tracer, NULL, &tracing_cpumask_fops); -- cgit v1.2.3 From 98870ab0a5a3f1822aee681d2997017e1c87d026 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 14 Nov 2008 10:39:26 +1100 Subject: CRED: Documentation Document credentials and the new credentials API. Signed-off-by: David Howells Signed-off-by: James Morris --- Documentation/credentials.txt | 582 ++++++++++++++++++++++++++++++++++++++++++ include/linux/cred.h | 12 +- kernel/cred.c | 2 +- 3 files changed, 594 insertions(+), 2 deletions(-) create mode 100644 Documentation/credentials.txt (limited to 'Documentation') diff --git a/Documentation/credentials.txt b/Documentation/credentials.txt new file mode 100644 index 000000000000..df03169782ea --- /dev/null +++ b/Documentation/credentials.txt @@ -0,0 +1,582 @@ + ==================== + CREDENTIALS IN LINUX + ==================== + +By: David Howells + +Contents: + + (*) Overview. + + (*) Types of credentials. + + (*) File markings. + + (*) Task credentials. + + - Immutable credentials. + - Accessing task credentials. + - Accessing another task's credentials. + - Altering credentials. + - Managing credentials. + + (*) Open file credentials. + + (*) Overriding the VFS's use of credentials. + + +======== +OVERVIEW +======== + +There are several parts to the security check performed by Linux when one +object acts upon another: + + (1) Objects. + + Objects are things in the system that may be acted upon directly by + userspace programs. Linux has a variety of actionable objects, including: + + - Tasks + - Files/inodes + - Sockets + - Message queues + - Shared memory segments + - Semaphores + - Keys + + As a part of the description of all these objects there is a set of + credentials. What's in the set depends on the type of object. + + (2) Object ownership. + + Amongst the credentials of most objects, there will be a subset that + indicates the ownership of that object. This is used for resource + accounting and limitation (disk quotas and task rlimits for example). + + In a standard UNIX filesystem, for instance, this will be defined by the + UID marked on the inode. + + (3) The objective context. + + Also amongst the credentials of those objects, there will be a subset that + indicates the 'objective context' of that object. This may or may not be + the same set as in (2) - in standard UNIX files, for instance, this is the + defined by the UID and the GID marked on the inode. + + The objective context is used as part of the security calculation that is + carried out when an object is acted upon. + + (4) Subjects. + + A subject is an object that is acting upon another object. + + Most of the objects in the system are inactive: they don't act on other + objects within the system. Processes/tasks are the obvious exception: + they do stuff; they access and manipulate things. + + Objects other than tasks may under some circumstances also be subjects. + For instance an open file may send SIGIO to a task using the UID and EUID + given to it by a task that called fcntl(F_SETOWN) upon it. In this case, + the file struct will have a subjective context too. + + (5) The subjective context. + + A subject has an additional interpretation of its credentials. A subset + of its credentials forms the 'subjective context'. The subjective context + is used as part of the security calculation that is carried out when a + subject acts. + + A Linux task, for example, has the FSUID, FSGID and the supplementary + group list for when it is acting upon a file - which are quite separate + from the real UID and GID that normally form the objective context of the + task. + + (6) Actions. + + Linux has a number of actions available that a subject may perform upon an + object. The set of actions available depends on the nature of the subject + and the object. + + Actions include reading, writing, creating and deleting files; forking or + signalling and tracing tasks. + + (7) Rules, access control lists and security calculations. + + When a subject acts upon an object, a security calculation is made. This + involves taking the subjective context, the objective context and the + action, and searching one or more sets of rules to see whether the subject + is granted or denied permission to act in the desired manner on the + object, given those contexts. + + There are two main sources of rules: + + (a) Discretionary access control (DAC): + + Sometimes the object will include sets of rules as part of its + description. This is an 'Access Control List' or 'ACL'. A Linux + file may supply more than one ACL. + + A traditional UNIX file, for example, includes a permissions mask that + is an abbreviated ACL with three fixed classes of subject ('user', + 'group' and 'other'), each of which may be granted certain privileges + ('read', 'write' and 'execute' - whatever those map to for the object + in question). UNIX file permissions do not allow the arbitrary + specification of subjects, however, and so are of limited use. + + A Linux file might also sport a POSIX ACL. This is a list of rules + that grants various permissions to arbitrary subjects. + + (b) Mandatory access control (MAC): + + The system as a whole may have one or more sets of rules that get + applied to all subjects and objects, regardless of their source. + SELinux and Smack are examples of this. + + In the case of SELinux and Smack, each object is given a label as part + of its credentials. When an action is requested, they take the + subject label, the object label and the action and look for a rule + that says that this action is either granted or denied. + + +==================== +TYPES OF CREDENTIALS +==================== + +The Linux kernel supports the following types of credentials: + + (1) Traditional UNIX credentials. + + Real User ID + Real Group ID + + The UID and GID are carried by most, if not all, Linux objects, even if in + some cases it has to be invented (FAT or CIFS files for example, which are + derived from Windows). These (mostly) define the objective context of + that object, with tasks being slightly different in some cases. + + Effective, Saved and FS User ID + Effective, Saved and FS Group ID + Supplementary groups + + These are additional credentials used by tasks only. Usually, an + EUID/EGID/GROUPS will be used as the subjective context, and real UID/GID + will be used as the objective. For tasks, it should be noted that this is + not always true. + + (2) Capabilities. + + Set of permitted capabilities + Set of inheritable capabilities + Set of effective capabilities + Capability bounding set + + These are only carried by tasks. They indicate superior capabilities + granted piecemeal to a task that an ordinary task wouldn't otherwise have. + These are manipulated implicitly by changes to the traditional UNIX + credentials, but can also be manipulated directly by the capset() system + call. + + The permitted capabilities are those caps that the process might grant + itself to its effective or permitted sets through capset(). This + inheritable set might also be so constrained. + + The effective capabilities are the ones that a task is actually allowed to + make use of itself. + + The inheritable capabilities are the ones that may get passed across + execve(). + + The bounding set limits the capabilities that may be inherited across + execve(), especially when a binary is executed that will execute as UID 0. + + (3) Secure management flags (securebits). + + These are only carried by tasks. These govern the way the above + credentials are manipulated and inherited over certain operations such as + execve(). They aren't used directly as objective or subjective + credentials. + + (4) Keys and keyrings. + + These are only carried by tasks. They carry and cache security tokens + that don't fit into the other standard UNIX credentials. They are for + making such things as network filesystem keys available to the file + accesses performed by processes, without the necessity of ordinary + programs having to know about security details involved. + + Keyrings are a special type of key. They carry sets of other keys and can + be searched for the desired key. Each process may subscribe to a number + of keyrings: + + Per-thread keying + Per-process keyring + Per-session keyring + + When a process accesses a key, if not already present, it will normally be + cached on one of these keyrings for future accesses to find. + + For more information on using keys, see Documentation/keys.txt. + + (5) LSM + + The Linux Security Module allows extra controls to be placed over the + operations that a task may do. Currently Linux supports two main + alternate LSM options: SELinux and Smack. + + Both work by labelling the objects in a system and then applying sets of + rules (policies) that say what operations a task with one label may do to + an object with another label. + + (6) AF_KEY + + This is a socket-based approach to credential management for networking + stacks [RFC 2367]. It isn't discussed by this document as it doesn't + interact directly with task and file credentials; rather it keeps system + level credentials. + + +When a file is opened, part of the opening task's subjective context is +recorded in the file struct created. This allows operations using that file +struct to use those credentials instead of the subjective context of the task +that issued the operation. An example of this would be a file opened on a +network filesystem where the credentials of the opened file should be presented +to the server, regardless of who is actually doing a read or a write upon it. + + +============= +FILE MARKINGS +============= + +Files on disk or obtained over the network may have annotations that form the +objective security context of that file. Depending on the type of filesystem, +this may include one or more of the following: + + (*) UNIX UID, GID, mode; + + (*) Windows user ID; + + (*) Access control list; + + (*) LSM security label; + + (*) UNIX exec privilege escalation bits (SUID/SGID); + + (*) File capabilities exec privilege escalation bits. + +These are compared to the task's subjective security context, and certain +operations allowed or disallowed as a result. In the case of execve(), the +privilege escalation bits come into play, and may allow the resulting process +extra privileges, based on the annotations on the executable file. + + +================ +TASK CREDENTIALS +================ + +In Linux, all of a task's credentials are held in (uid, gid) or through +(groups, keys, LSM security) a refcounted structure of type 'struct cred'. +Each task points to its credentials by a pointer called 'cred' in its +task_struct. + +Once a set of credentials has been prepared and committed, it may not be +changed, barring the following exceptions: + + (1) its reference count may be changed; + + (2) the reference count on the group_info struct it points to may be changed; + + (3) the reference count on the security data it points to may be changed; + + (4) the reference count on any keyrings it points to may be changed; + + (5) any keyrings it points to may be revoked, expired or have their security + attributes changed; and + + (6) the contents of any keyrings to which it points may be changed (the whole + point of keyrings being a shared set of credentials, modifiable by anyone + with appropriate access). + +To alter anything in the cred struct, the copy-and-replace principle must be +adhered to. First take a copy, then alter the copy and then use RCU to change +the task pointer to make it point to the new copy. There are wrappers to aid +with this (see below). + +A task may only alter its _own_ credentials; it is no longer permitted for a +task to alter another's credentials. This means the capset() system call is no +longer permitted to take any PID other than the one of the current process. +Also keyctl_instantiate() and keyctl_negate() functions no longer permit +attachment to process-specific keyrings in the requesting process as the +instantiating process may need to create them. + + +IMMUTABLE CREDENTIALS +--------------------- + +Once a set of credentials has been made public (by calling commit_creds() for +example), it must be considered immutable, barring two exceptions: + + (1) The reference count may be altered. + + (2) Whilst the keyring subscriptions of a set of credentials may not be + changed, the keyrings subscribed to may have their contents altered. + +To catch accidental credential alteration at compile time, struct task_struct +has _const_ pointers to its credential sets, as does struct file. Furthermore, +certain functions such as get_cred() and put_cred() operate on const pointers, +thus rendering casts unnecessary, but require to temporarily ditch the const +qualification to be able to alter the reference count. + + +ACCESSING TASK CREDENTIALS +-------------------------- + +A task being able to alter only its own credentials permits the current process +to read or replace its own credentials without the need for any form of locking +- which simplifies things greatly. It can just call: + + const struct cred *current_cred() + +to get a pointer to its credentials structure, and it doesn't have to release +it afterwards. + +There are convenience wrappers for retrieving specific aspects of a task's +credentials (the value is simply returned in each case): + + uid_t current_uid(void) Current's real UID + gid_t current_gid(void) Current's real GID + uid_t current_euid(void) Current's effective UID + gid_t current_egid(void) Current's effective GID + uid_t current_fsuid(void) Current's file access UID + gid_t current_fsgid(void) Current's file access GID + kernel_cap_t current_cap(void) Current's effective capabilities + void *current_security(void) Current's LSM security pointer + struct user_struct *current_user(void) Current's user account + +There are also convenience wrappers for retrieving specific associated pairs of +a task's credentials: + + void current_uid_gid(uid_t *, gid_t *); + void current_euid_egid(uid_t *, gid_t *); + void current_fsuid_fsgid(uid_t *, gid_t *); + +which return these pairs of values through their arguments after retrieving +them from the current task's credentials. + + +In addition, there is a function for obtaining a reference on the current +process's current set of credentials: + + const struct cred *get_current_cred(void); + +and functions for getting references to one of the credentials that don't +actually live in struct cred: + + struct user_struct *get_current_user(void); + struct group_info *get_current_groups(void); + +which get references to the current process's user accounting structure and +supplementary groups list respectively. + +Once a reference has been obtained, it must be released with put_cred(), +free_uid() or put_group_info() as appropriate. + + +ACCESSING ANOTHER TASK'S CREDENTIALS +------------------------------------ + +Whilst a task may access its own credentials without the need for locking, the +same is not true of a task wanting to access another task's credentials. It +must use the RCU read lock and rcu_dereference(). + +The rcu_dereference() is wrapped by: + + const struct cred *__task_cred(struct task_struct *task); + +This should be used inside the RCU read lock, as in the following example: + + void foo(struct task_struct *t, struct foo_data *f) + { + const struct cred *tcred; + ... + rcu_read_lock(); + tcred = __task_cred(t); + f->uid = tcred->uid; + f->gid = tcred->gid; + f->groups = get_group_info(tcred->groups); + rcu_read_unlock(); + ... + } + +A function need not get RCU read lock to use __task_cred() if it is holding a +spinlock at the time as this implicitly holds the RCU read lock. + +Should it be necessary to hold another task's credentials for a long period of +time, and possibly to sleep whilst doing so, then the caller should get a +reference on them using: + + const struct cred *get_task_cred(struct task_struct *task); + +This does all the RCU magic inside of it. The caller must call put_cred() on +the credentials so obtained when they're finished with. + +There are a couple of convenience functions to access bits of another task's +credentials, hiding the RCU magic from the caller: + + uid_t task_uid(task) Task's real UID + uid_t task_euid(task) Task's effective UID + +If the caller is holding a spinlock or the RCU read lock at the time anyway, +then: + + __task_cred(task)->uid + __task_cred(task)->euid + +should be used instead. Similarly, if multiple aspects of a task's credentials +need to be accessed, RCU read lock or a spinlock should be used, __task_cred() +called, the result stored in a temporary pointer and then the credential +aspects called from that before dropping the lock. This prevents the +potentially expensive RCU magic from being invoked multiple times. + +Should some other single aspect of another task's credentials need to be +accessed, then this can be used: + + task_cred_xxx(task, member) + +where 'member' is a non-pointer member of the cred struct. For instance: + + uid_t task_cred_xxx(task, suid); + +will retrieve 'struct cred::suid' from the task, doing the appropriate RCU +magic. This may not be used for pointer members as what they point to may +disappear the moment the RCU read lock is dropped. + + +ALTERING CREDENTIALS +-------------------- + +As previously mentioned, a task may only alter its own credentials, and may not +alter those of another task. This means that it doesn't need to use any +locking to alter its own credentials. + +To alter the current process's credentials, a function should first prepare a +new set of credentials by calling: + + struct cred *prepare_creds(void); + +this locks current->cred_replace_mutex and then allocates and constructs a +duplicate of the current process's credentials, returning with the mutex still +held if successful. It returns NULL if not successful (out of memory). + +The mutex prevents ptrace() from altering the ptrace state of a process whilst +security checks on credentials construction and changing is taking place as +the ptrace state may alter the outcome, particularly in the case of execve(). + +The new credentials set should be altered appropriately, and any security +checks and hooks done. Both the current and the proposed sets of credentials +are available for this purpose as current_cred() will return the current set +still at this point. + + +When the credential set is ready, it should be committed to the current process +by calling: + + int commit_creds(struct cred *new); + +This will alter various aspects of the credentials and the process, giving the +LSM a chance to do likewise, then it will use rcu_assign_pointer() to actually +commit the new credentials to current->cred, it will release +current->cred_replace_mutex to allow ptrace() to take place, and it will notify +the scheduler and others of the changes. + +This function is guaranteed to return 0, so that it can be tail-called at the +end of such functions as sys_setresuid(). + +Note that this function consumes the caller's reference to the new credentials. +The caller should _not_ call put_cred() on the new credentials afterwards. + +Furthermore, once this function has been called on a new set of credentials, +those credentials may _not_ be changed further. + + +Should the security checks fail or some other error occur after prepare_creds() +has been called, then the following function should be invoked: + + void abort_creds(struct cred *new); + +This releases the lock on current->cred_replace_mutex that prepare_creds() got +and then releases the new credentials. + + +A typical credentials alteration function would look something like this: + + int alter_suid(uid_t suid) + { + struct cred *new; + int ret; + + new = prepare_creds(); + if (!new) + return -ENOMEM; + + new->suid = suid; + ret = security_alter_suid(new); + if (ret < 0) { + abort_creds(new); + return ret; + } + + return commit_creds(new); + } + + +MANAGING CREDENTIALS +-------------------- + +There are some functions to help manage credentials: + + (*) void put_cred(const struct cred *cred); + + This releases a reference to the given set of credentials. If the + reference count reaches zero, the credentials will be scheduled for + destruction by the RCU system. + + (*) const struct cred *get_cred(const struct cred *cred); + + This gets a reference on a live set of credentials, returning a pointer to + that set of credentials. + + (*) struct cred *get_new_cred(struct cred *cred); + + This gets a reference on a set of credentials that is under construction + and is thus still mutable, returning a pointer to that set of credentials. + + +===================== +OPEN FILE CREDENTIALS +===================== + +When a new file is opened, a reference is obtained on the opening task's +credentials and this is attached to the file struct as 'f_cred' in place of +'f_uid' and 'f_gid'. Code that used to access file->f_uid and file->f_gid +should now access file->f_cred->fsuid and file->f_cred->fsgid. + +It is safe to access f_cred without the use of RCU or locking because the +pointer will not change over the lifetime of the file struct, and nor will the +contents of the cred struct pointed to, barring the exceptions listed above +(see the Task Credentials section). + + +======================================= +OVERRIDING THE VFS'S USE OF CREDENTIALS +======================================= + +Under some circumstances it is desirable to override the credentials used by +the VFS, and that can be done by calling into such as vfs_mkdir() with a +different set of credentials. This is done in the following places: + + (*) sys_faccessat(). + + (*) do_coredump(). + + (*) nfs4recover.c. diff --git a/include/linux/cred.h b/include/linux/cred.h index 8edb4d1d5427..794aab5c66e5 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -1,4 +1,4 @@ -/* Credentials management +/* Credentials management - see Documentation/credentials.txt * * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) @@ -169,6 +169,12 @@ static inline struct cred *get_new_cred(struct cred *cred) * * Get a reference on the specified set of credentials. The caller must * release the reference. + * + * This is used to deal with a committed set of credentials. Although the + * pointer is const, this will temporarily discard the const and increment the + * usage count. The purpose of this is to attempt to catch at compile time the + * accidental alteration of a set of credentials that should be considered + * immutable. */ static inline const struct cred *get_cred(const struct cred *cred) { @@ -181,6 +187,10 @@ static inline const struct cred *get_cred(const struct cred *cred) * * Release a reference to a set of credentials, deleting them when the last ref * is released. + * + * This takes a const pointer to a set of credentials because the credentials + * on task_struct are attached by const pointers to prevent accidental + * alteration of otherwise immutable credential sets. */ static inline void put_cred(const struct cred *_cred) { diff --git a/kernel/cred.c b/kernel/cred.c index e6fcdd67b2ec..b8bd2f99d8ce 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -1,4 +1,4 @@ -/* Task credentials management +/* Task credentials management - see Documentation/credentials.txt * * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) -- cgit v1.2.3 From a0bca6a59ebc052751eed6e3b182c153495672d8 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Fri, 14 Nov 2008 17:47:40 -0500 Subject: markers: create DEFINE_MARKER and GET_MARKER (new API) Impact: new API. Allow markers to be used only for declaration, without function call associated. Useful to create specialized probes. The problem we had is that two function calls were required when one wanted to put a marker in a tracepoint probe. Now the marker can be used simply for trace data type declaration, leaving the trace write work within the tracepoint probe without any additional function call. Signed-off-by: Mathieu Desnoyers Signed-off-by: Ingo Molnar --- Documentation/markers.txt | 14 ++++++++++++++ include/linux/marker.h | 39 +++++++++++++++++++++++---------------- 2 files changed, 37 insertions(+), 16 deletions(-) (limited to 'Documentation') diff --git a/Documentation/markers.txt b/Documentation/markers.txt index 089f6138fcd9..6d275e4ef385 100644 --- a/Documentation/markers.txt +++ b/Documentation/markers.txt @@ -70,6 +70,20 @@ a printk warning which identifies the inconsistency: "Format mismatch for probe probe_name (format), marker (format)" +Another way to use markers is to simply define the marker without generating any +function call to actually call into the marker. This is useful in combination +with tracepoint probes in a scheme like this : + +void probe_tracepoint_name(unsigned int arg1, struct task_struct *tsk); + +DEFINE_MARKER_TP(marker_eventname, tracepoint_name, probe_tracepoint_name, + "arg1 %u pid %d"); + +notrace void probe_tracepoint_name(unsigned int arg1, struct task_struct *tsk) +{ + struct marker *marker = &GET_MARKER(kernel_irq_entry); + /* write data to trace buffers ... */ +} * Probe / marker example diff --git a/include/linux/marker.h b/include/linux/marker.h index 57a307018ceb..34c14bc957f5 100644 --- a/include/linux/marker.h +++ b/include/linux/marker.h @@ -55,6 +55,22 @@ struct marker { #ifdef CONFIG_MARKERS +#define _DEFINE_MARKER(name, tp_name_str, tp_cb, format) \ + static const char __mstrtab_##name[] \ + __attribute__((section("__markers_strings"))) \ + = #name "\0" format; \ + static struct marker __mark_##name \ + __attribute__((section("__markers"), aligned(8))) = \ + { __mstrtab_##name, &__mstrtab_##name[sizeof(#name)], \ + 0, 0, marker_probe_cb, { __mark_empty_function, NULL},\ + NULL, tp_name_str, tp_cb } + +#define DEFINE_MARKER(name, format) \ + _DEFINE_MARKER(name, NULL, NULL, format) + +#define DEFINE_MARKER_TP(name, tp_name, tp_cb, format) \ + _DEFINE_MARKER(name, #tp_name, tp_cb, format) + /* * Note : the empty asm volatile with read constraint is used here instead of a * "used" attribute to fix a gcc 4.1.x bug. @@ -68,14 +84,7 @@ struct marker { */ #define __trace_mark(generic, name, call_private, format, args...) \ do { \ - static const char __mstrtab_##name[] \ - __attribute__((section("__markers_strings"))) \ - = #name "\0" format; \ - static struct marker __mark_##name \ - __attribute__((section("__markers"), aligned(8))) = \ - { __mstrtab_##name, &__mstrtab_##name[sizeof(#name)], \ - 0, 0, marker_probe_cb, \ - { __mark_empty_function, NULL}, NULL, NULL, NULL }; \ + DEFINE_MARKER(name, format); \ __mark_check_format(format, ## args); \ if (unlikely(__mark_##name.state)) { \ (*__mark_##name.call) \ @@ -89,14 +98,7 @@ struct marker { { \ register_trace_##tp_name(tp_cb); \ } \ - static const char __mstrtab_##name[] \ - __attribute__((section("__markers_strings"))) \ - = #name "\0" format; \ - static struct marker __mark_##name \ - __attribute__((section("__markers"), aligned(8))) = \ - { __mstrtab_##name, &__mstrtab_##name[sizeof(#name)], \ - 0, 0, marker_probe_cb, \ - { __mark_empty_function, NULL}, NULL, #tp_name, tp_cb };\ + DEFINE_MARKER_TP(name, tp_name, tp_cb, format); \ __mark_check_format(format, ## args); \ (*__mark_##name.call)(&__mark_##name, call_private, \ ## args); \ @@ -104,7 +106,11 @@ struct marker { extern void marker_update_probe_range(struct marker *begin, struct marker *end); + +#define GET_MARKER(name) (__mark_##name) + #else /* !CONFIG_MARKERS */ +#define DEFINE_MARKER(name, tp_name, tp_cb, format) #define __trace_mark(generic, name, call_private, format, args...) \ __mark_check_format(format, ## args) #define __trace_mark_tp(name, call_private, tp_name, tp_cb, format, args...) \ @@ -118,6 +124,7 @@ extern void marker_update_probe_range(struct marker *begin, static inline void marker_update_probe_range(struct marker *begin, struct marker *end) { } +#define GET_MARKER(name) #endif /* CONFIG_MARKERS */ /** -- cgit v1.2.3 From 7e066fb870fcd1025ec3ba7bbde5d541094f4ce1 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Fri, 14 Nov 2008 17:47:47 -0500 Subject: tracepoints: add DECLARE_TRACE() and DEFINE_TRACE() Impact: API *CHANGE*. Must update all tracepoint users. Add DEFINE_TRACE() to tracepoints to let them declare the tracepoint structure in a single spot for all the kernel. It helps reducing memory consumption, especially when declaring a lot of tracepoints, e.g. for kmalloc tracing. *API CHANGE WARNING*: now, DECLARE_TRACE() must be used in headers for tracepoint declarations rather than DEFINE_TRACE(). This is the sane way to do it. The name previously used was misleading. Updates scheduler instrumentation to follow this API change. Signed-off-by: Mathieu Desnoyers Signed-off-by: Ingo Molnar --- Documentation/tracepoints.txt | 7 ++++++- include/asm-generic/vmlinux.lds.h | 1 + include/linux/tracepoint.h | 35 +++++++++++++++++++++++---------- include/trace/sched.h | 24 +++++++++++----------- kernel/exit.c | 4 ++++ kernel/fork.c | 2 ++ kernel/kthread.c | 3 +++ kernel/sched.c | 6 ++++++ kernel/signal.c | 2 ++ samples/tracepoints/tp-samples-trace.h | 4 ++-- samples/tracepoints/tracepoint-sample.c | 3 +++ 11 files changed, 66 insertions(+), 25 deletions(-) (limited to 'Documentation') diff --git a/Documentation/tracepoints.txt b/Documentation/tracepoints.txt index 5d354e167494..e8ad47b437f3 100644 --- a/Documentation/tracepoints.txt +++ b/Documentation/tracepoints.txt @@ -42,7 +42,7 @@ In include/trace/subsys.h : #include -DEFINE_TRACE(subsys_eventname, +DECLARE_TRACE(subsys_eventname, TPPTOTO(int firstarg, struct task_struct *p), TPARGS(firstarg, p)); @@ -50,6 +50,8 @@ In subsys/file.c (where the tracing statement must be added) : #include +DEFINE_TRACE(subsys_eventname); + void somefct(void) { ... @@ -86,6 +88,9 @@ to limit collisions. Tracepoint names are global to the kernel: they are considered as being the same whether they are in the core kernel image or in modules. +If the tracepoint has to be used in kernel modules, an +EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be used to +export the defined tracepoints. * Probe / tracepoint example diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index a5e4ed9baec8..3b46ae464933 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -71,6 +71,7 @@ VMLINUX_SYMBOL(__start___markers) = .; \ *(__markers) \ VMLINUX_SYMBOL(__stop___markers) = .; \ + . = ALIGN(32); \ VMLINUX_SYMBOL(__start___tracepoints) = .; \ *(__tracepoints) \ VMLINUX_SYMBOL(__stop___tracepoints) = .; \ diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index 7e9b42aeae0e..757005458366 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -24,8 +24,12 @@ struct tracepoint { const char *name; /* Tracepoint name */ int state; /* State. */ void **funcs; -} __attribute__((aligned(8))); - +} __attribute__((aligned(32))); /* + * Aligned on 32 bytes because it is + * globally visible and gcc happily + * align these on the structure size. + * Keep in sync with vmlinux.lds.h. + */ #define TPPROTO(args...) args #define TPARGS(args...) args @@ -55,15 +59,10 @@ struct tracepoint { * not add unwanted padding between the beginning of the section and the * structure. Force alignment to the same alignment as the section start. */ -#define DEFINE_TRACE(name, proto, args) \ +#define DECLARE_TRACE(name, proto, args) \ + extern struct tracepoint __tracepoint_##name; \ static inline void trace_##name(proto) \ { \ - static const char __tpstrtab_##name[] \ - __attribute__((section("__tracepoints_strings"))) \ - = #name; \ - static struct tracepoint __tracepoint_##name \ - __attribute__((section("__tracepoints"), aligned(8))) = \ - { __tpstrtab_##name, 0, NULL }; \ if (unlikely(__tracepoint_##name.state)) \ __DO_TRACE(&__tracepoint_##name, \ TPPROTO(proto), TPARGS(args)); \ @@ -77,11 +76,23 @@ struct tracepoint { return tracepoint_probe_unregister(#name, (void *)probe);\ } +#define DEFINE_TRACE(name) \ + static const char __tpstrtab_##name[] \ + __attribute__((section("__tracepoints_strings"))) = #name; \ + struct tracepoint __tracepoint_##name \ + __attribute__((section("__tracepoints"), aligned(32))) = \ + { __tpstrtab_##name, 0, NULL } + +#define EXPORT_TRACEPOINT_SYMBOL_GPL(name) \ + EXPORT_SYMBOL_GPL(__tracepoint_##name) +#define EXPORT_TRACEPOINT_SYMBOL(name) \ + EXPORT_SYMBOL(__tracepoint_##name) + extern void tracepoint_update_probe_range(struct tracepoint *begin, struct tracepoint *end); #else /* !CONFIG_TRACEPOINTS */ -#define DEFINE_TRACE(name, proto, args) \ +#define DECLARE_TRACE(name, proto, args) \ static inline void _do_trace_##name(struct tracepoint *tp, proto) \ { } \ static inline void trace_##name(proto) \ @@ -95,6 +106,10 @@ extern void tracepoint_update_probe_range(struct tracepoint *begin, return -ENOSYS; \ } +#define DEFINE_TRACE(name) +#define EXPORT_TRACEPOINT_SYMBOL_GPL(name) +#define EXPORT_TRACEPOINT_SYMBOL(name) + static inline void tracepoint_update_probe_range(struct tracepoint *begin, struct tracepoint *end) { } diff --git a/include/trace/sched.h b/include/trace/sched.h index ad47369d01b5..9b2854abf7e2 100644 --- a/include/trace/sched.h +++ b/include/trace/sched.h @@ -4,52 +4,52 @@ #include #include -DEFINE_TRACE(sched_kthread_stop, +DECLARE_TRACE(sched_kthread_stop, TPPROTO(struct task_struct *t), TPARGS(t)); -DEFINE_TRACE(sched_kthread_stop_ret, +DECLARE_TRACE(sched_kthread_stop_ret, TPPROTO(int ret), TPARGS(ret)); -DEFINE_TRACE(sched_wait_task, +DECLARE_TRACE(sched_wait_task, TPPROTO(struct rq *rq, struct task_struct *p), TPARGS(rq, p)); -DEFINE_TRACE(sched_wakeup, +DECLARE_TRACE(sched_wakeup, TPPROTO(struct rq *rq, struct task_struct *p), TPARGS(rq, p)); -DEFINE_TRACE(sched_wakeup_new, +DECLARE_TRACE(sched_wakeup_new, TPPROTO(struct rq *rq, struct task_struct *p), TPARGS(rq, p)); -DEFINE_TRACE(sched_switch, +DECLARE_TRACE(sched_switch, TPPROTO(struct rq *rq, struct task_struct *prev, struct task_struct *next), TPARGS(rq, prev, next)); -DEFINE_TRACE(sched_migrate_task, +DECLARE_TRACE(sched_migrate_task, TPPROTO(struct rq *rq, struct task_struct *p, int dest_cpu), TPARGS(rq, p, dest_cpu)); -DEFINE_TRACE(sched_process_free, +DECLARE_TRACE(sched_process_free, TPPROTO(struct task_struct *p), TPARGS(p)); -DEFINE_TRACE(sched_process_exit, +DECLARE_TRACE(sched_process_exit, TPPROTO(struct task_struct *p), TPARGS(p)); -DEFINE_TRACE(sched_process_wait, +DECLARE_TRACE(sched_process_wait, TPPROTO(struct pid *pid), TPARGS(pid)); -DEFINE_TRACE(sched_process_fork, +DECLARE_TRACE(sched_process_fork, TPPROTO(struct task_struct *parent, struct task_struct *child), TPARGS(parent, child)); -DEFINE_TRACE(sched_signal_send, +DECLARE_TRACE(sched_signal_send, TPPROTO(int sig, struct task_struct *p), TPARGS(sig, p)); diff --git a/kernel/exit.c b/kernel/exit.c index ae2b92be5fae..f995d2418668 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -54,6 +54,10 @@ #include #include +DEFINE_TRACE(sched_process_free); +DEFINE_TRACE(sched_process_exit); +DEFINE_TRACE(sched_process_wait); + static void exit_mm(struct task_struct * tsk); static inline int task_detached(struct task_struct *p) diff --git a/kernel/fork.c b/kernel/fork.c index f6083561dfe0..0837d0deee5f 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -79,6 +79,8 @@ DEFINE_PER_CPU(unsigned long, process_counts) = 0; __cacheline_aligned DEFINE_RWLOCK(tasklist_lock); /* outer */ +DEFINE_TRACE(sched_process_fork); + int nr_processes(void) { int cpu; diff --git a/kernel/kthread.c b/kernel/kthread.c index 8e7a7ce3ed0a..4fbc456f393d 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -21,6 +21,9 @@ static DEFINE_SPINLOCK(kthread_create_lock); static LIST_HEAD(kthread_create_list); struct task_struct *kthreadd_task; +DEFINE_TRACE(sched_kthread_stop); +DEFINE_TRACE(sched_kthread_stop_ret); + struct kthread_create_info { /* Information passed to kthread() from kthreadd. */ diff --git a/kernel/sched.c b/kernel/sched.c index 50a21f964679..327f91c63c99 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -118,6 +118,12 @@ */ #define RUNTIME_INF ((u64)~0ULL) +DEFINE_TRACE(sched_wait_task); +DEFINE_TRACE(sched_wakeup); +DEFINE_TRACE(sched_wakeup_new); +DEFINE_TRACE(sched_switch); +DEFINE_TRACE(sched_migrate_task); + #ifdef CONFIG_SMP /* * Divide a load by a sched group cpu_power : (load / sg->__cpu_power) diff --git a/kernel/signal.c b/kernel/signal.c index 4530fc654455..e9afe63da24b 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -41,6 +41,8 @@ static struct kmem_cache *sigqueue_cachep; +DEFINE_TRACE(sched_signal_send); + static void __user *sig_handler(struct task_struct *t, int sig) { return t->sighand->action[sig - 1].sa.sa_handler; diff --git a/samples/tracepoints/tp-samples-trace.h b/samples/tracepoints/tp-samples-trace.h index 0216b55bd640..01724e04c556 100644 --- a/samples/tracepoints/tp-samples-trace.h +++ b/samples/tracepoints/tp-samples-trace.h @@ -4,10 +4,10 @@ #include /* for struct inode and struct file */ #include -DEFINE_TRACE(subsys_event, +DECLARE_TRACE(subsys_event, TPPROTO(struct inode *inode, struct file *file), TPARGS(inode, file)); -DEFINE_TRACE(subsys_eventb, +DECLARE_TRACE(subsys_eventb, TPPROTO(void), TPARGS()); #endif diff --git a/samples/tracepoints/tracepoint-sample.c b/samples/tracepoints/tracepoint-sample.c index 4ae4b7fcc043..00d169792a3e 100644 --- a/samples/tracepoints/tracepoint-sample.c +++ b/samples/tracepoints/tracepoint-sample.c @@ -13,6 +13,9 @@ #include #include "tp-samples-trace.h" +DEFINE_TRACE(subsys_event); +DEFINE_TRACE(subsys_eventb); + struct proc_dir_entry *pentry_example; static int my_open(struct inode *inode, struct file *file) -- cgit v1.2.3 From 8fd88d159031bd238dad1d7186a2030b9f9349de Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Fri, 14 Nov 2008 17:47:48 -0500 Subject: tracepoints: documentation fix for teardown Impact: documentation update Need a tracepoint_synchronize_unregister() before the end of exit() to make sure every probe callers have exited the non preemptible section and thus are not executing the probe code anymore. Signed-off-by: Mathieu Desnoyers Signed-off-by: Ingo Molnar --- Documentation/tracepoints.txt | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/tracepoints.txt b/Documentation/tracepoints.txt index e8ad47b437f3..93cd90e89cc1 100644 --- a/Documentation/tracepoints.txt +++ b/Documentation/tracepoints.txt @@ -70,10 +70,12 @@ Where : Connecting a function (probe) to a tracepoint is done by providing a probe (function to call) for the specific tracepoint through register_trace_subsys_eventname(). Removing a probe is done through -unregister_trace_subsys_eventname(); it will remove the probe sure there is no -caller left using the probe when it returns. Probe removal is preempt-safe -because preemption is disabled around the probe call. See the "Probe example" -section below for a sample probe module. +unregister_trace_subsys_eventname(); it will remove the probe. +marker_synchronize_unregister() must be called before the end of the module exit +function to make sure there is no caller left using the probe. This, and the +fact that preemption is disabled around the probe call, make sure that probe +removal and module unload are safe. See the "Probe example" section below for a +sample probe module. The tracepoint mechanism supports inserting multiple instances of the same tracepoint, but a single definition must be made of a given tracepoint name over -- cgit v1.2.3 From 0dcf8fe5fe5d7279f1c479fa82f1f1ca6f22e814 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Fri, 14 Nov 2008 17:47:49 -0500 Subject: tracepoints, docs: marker_synchronize_unregister->tracepoint_synchronize_unregister Impact: documentation update. Signed-off-by: Zhaolei Signed-off-by: Mathieu Desnoyers Signed-off-by: Ingo Molnar --- Documentation/tracepoints.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/tracepoints.txt b/Documentation/tracepoints.txt index 93cd90e89cc1..3a1c74384ffb 100644 --- a/Documentation/tracepoints.txt +++ b/Documentation/tracepoints.txt @@ -71,7 +71,7 @@ Connecting a function (probe) to a tracepoint is done by providing a probe (function to call) for the specific tracepoint through register_trace_subsys_eventname(). Removing a probe is done through unregister_trace_subsys_eventname(); it will remove the probe. -marker_synchronize_unregister() must be called before the end of the module exit +tracepoint_synchronize_unregister() must be called before the end of the module exit function to make sure there is no caller left using the probe. This, and the fact that preemption is disabled around the probe call, make sure that probe removal and module unload are safe. See the "Probe example" section below for a -- cgit v1.2.3 From 0a7ad64531713e33e39af95bdbfb172f4f328b1e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 16 Nov 2008 08:54:36 +0100 Subject: tracepoints: format documentation Impact: documentation update Properly format Documentation/tracepoints.txt - it was full of overlong lines and other typographical problems. Signed-off-by: Ingo Molnar --- Documentation/tracepoints.txt | 87 +++++++++++++++++++++++-------------------- 1 file changed, 47 insertions(+), 40 deletions(-) (limited to 'Documentation') diff --git a/Documentation/tracepoints.txt b/Documentation/tracepoints.txt index 3a1c74384ffb..2d42241a25c3 100644 --- a/Documentation/tracepoints.txt +++ b/Documentation/tracepoints.txt @@ -3,28 +3,30 @@ Mathieu Desnoyers -This document introduces Linux Kernel Tracepoints and their use. It provides -examples of how to insert tracepoints in the kernel and connect probe functions -to them and provides some examples of probe functions. +This document introduces Linux Kernel Tracepoints and their use. It +provides examples of how to insert tracepoints in the kernel and +connect probe functions to them and provides some examples of probe +functions. * Purpose of tracepoints -A tracepoint placed in code provides a hook to call a function (probe) that you -can provide at runtime. A tracepoint can be "on" (a probe is connected to it) or -"off" (no probe is attached). When a tracepoint is "off" it has no effect, -except for adding a tiny time penalty (checking a condition for a branch) and -space penalty (adding a few bytes for the function call at the end of the -instrumented function and adds a data structure in a separate section). When a -tracepoint is "on", the function you provide is called each time the tracepoint -is executed, in the execution context of the caller. When the function provided -ends its execution, it returns to the caller (continuing from the tracepoint -site). +A tracepoint placed in code provides a hook to call a function (probe) +that you can provide at runtime. A tracepoint can be "on" (a probe is +connected to it) or "off" (no probe is attached). When a tracepoint is +"off" it has no effect, except for adding a tiny time penalty +(checking a condition for a branch) and space penalty (adding a few +bytes for the function call at the end of the instrumented function +and adds a data structure in a separate section). When a tracepoint +is "on", the function you provide is called each time the tracepoint +is executed, in the execution context of the caller. When the function +provided ends its execution, it returns to the caller (continuing from +the tracepoint site). You can put tracepoints at important locations in the code. They are lightweight hooks that can pass an arbitrary number of parameters, -which prototypes are described in a tracepoint declaration placed in a header -file. +which prototypes are described in a tracepoint declaration placed in a +header file. They can be used for tracing and performance accounting. @@ -63,36 +65,41 @@ Where : - subsys_eventname is an identifier unique to your event - subsys is the name of your subsystem. - eventname is the name of the event to trace. -- TPPTOTO(int firstarg, struct task_struct *p) is the prototype of the function - called by this tracepoint. -- TPARGS(firstarg, p) are the parameters names, same as found in the prototype. -Connecting a function (probe) to a tracepoint is done by providing a probe -(function to call) for the specific tracepoint through +- TPPTOTO(int firstarg, struct task_struct *p) is the prototype of the + function called by this tracepoint. + +- TPARGS(firstarg, p) are the parameters names, same as found in the + prototype. + +Connecting a function (probe) to a tracepoint is done by providing a +probe (function to call) for the specific tracepoint through register_trace_subsys_eventname(). Removing a probe is done through unregister_trace_subsys_eventname(); it will remove the probe. -tracepoint_synchronize_unregister() must be called before the end of the module exit -function to make sure there is no caller left using the probe. This, and the -fact that preemption is disabled around the probe call, make sure that probe -removal and module unload are safe. See the "Probe example" section below for a -sample probe module. - -The tracepoint mechanism supports inserting multiple instances of the same -tracepoint, but a single definition must be made of a given tracepoint name over -all the kernel to make sure no type conflict will occur. Name mangling of the -tracepoints is done using the prototypes to make sure typing is correct. -Verification of probe type correctness is done at the registration site by the -compiler. Tracepoints can be put in inline functions, inlined static functions, -and unrolled loops as well as regular functions. - -The naming scheme "subsys_event" is suggested here as a convention intended -to limit collisions. Tracepoint names are global to the kernel: they are -considered as being the same whether they are in the core kernel image or in -modules. + +tracepoint_synchronize_unregister() must be called before the end of +the module exit function to make sure there is no caller left using +the probe. This, and the fact that preemption is disabled around the +probe call, make sure that probe removal and module unload are safe. +See the "Probe example" section below for a sample probe module. + +The tracepoint mechanism supports inserting multiple instances of the +same tracepoint, but a single definition must be made of a given +tracepoint name over all the kernel to make sure no type conflict will +occur. Name mangling of the tracepoints is done using the prototypes +to make sure typing is correct. Verification of probe type correctness +is done at the registration site by the compiler. Tracepoints can be +put in inline functions, inlined static functions, and unrolled loops +as well as regular functions. + +The naming scheme "subsys_event" is suggested here as a convention +intended to limit collisions. Tracepoint names are global to the +kernel: they are considered as being the same whether they are in the +core kernel image or in modules. If the tracepoint has to be used in kernel modules, an -EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be used to -export the defined tracepoints. +EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be +used to export the defined tracepoints. * Probe / tracepoint example -- cgit v1.2.3 From 536533e69e3e4a9f0174509813f8df28970d6ebe Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 16 Nov 2008 19:41:14 -0800 Subject: rcu: documents rculist_nulls Adds Documentation/RCU/rculist_nulls.txt file to describe how 'nulls' end-of-list can help in some RCU algos. Signed-off-by: Eric Dumazet Acked-by: Peter Zijlstra Signed-off-by: David S. Miller --- Documentation/RCU/rculist_nulls.txt | 167 ++++++++++++++++++++++++++++++++++++ 1 file changed, 167 insertions(+) create mode 100644 Documentation/RCU/rculist_nulls.txt (limited to 'Documentation') diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt new file mode 100644 index 000000000000..239f542d48ba --- /dev/null +++ b/Documentation/RCU/rculist_nulls.txt @@ -0,0 +1,167 @@ +Using hlist_nulls to protect read-mostly linked lists and +objects using SLAB_DESTROY_BY_RCU allocations. + +Please read the basics in Documentation/RCU/listRCU.txt + +Using special makers (called 'nulls') is a convenient way +to solve following problem : + +A typical RCU linked list managing objects which are +allocated with SLAB_DESTROY_BY_RCU kmem_cache can +use following algos : + +1) Lookup algo +-------------- +rcu_read_lock() +begin: +obj = lockless_lookup(key); +if (obj) { + if (!try_get_ref(obj)) // might fail for free objects + goto begin; + /* + * Because a writer could delete object, and a writer could + * reuse these object before the RCU grace period, we + * must check key after geting the reference on object + */ + if (obj->key != key) { // not the object we expected + put_ref(obj); + goto begin; + } +} +rcu_read_unlock(); + +Beware that lockless_lookup(key) cannot use traditional hlist_for_each_entry_rcu() +but a version with an additional memory barrier (smp_rmb()) + +lockless_lookup(key) +{ + struct hlist_node *node, *next; + for (pos = rcu_dereference((head)->first); + pos && ({ next = pos->next; smp_rmb(); prefetch(next); 1; }) && + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); + pos = rcu_dereference(next)) + if (obj->key == key) + return obj; + return NULL; + +And note the traditional hlist_for_each_entry_rcu() misses this smp_rmb() : + + struct hlist_node *node; + for (pos = rcu_dereference((head)->first); + pos && ({ prefetch(pos->next); 1; }) && + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); + pos = rcu_dereference(pos->next)) + if (obj->key == key) + return obj; + return NULL; +} + +Quoting Corey Minyard : + +"If the object is moved from one list to another list in-between the + time the hash is calculated and the next field is accessed, and the + object has moved to the end of a new list, the traversal will not + complete properly on the list it should have, since the object will + be on the end of the new list and there's not a way to tell it's on a + new list and restart the list traversal. I think that this can be + solved by pre-fetching the "next" field (with proper barriers) before + checking the key." + +2) Insert algo : +---------------- + +We need to make sure a reader cannot read the new 'obj->obj_next' value +and previous value of 'obj->key'. Or else, an item could be deleted +from a chain, and inserted into another chain. If new chain was empty +before the move, 'next' pointer is NULL, and lockless reader can +not detect it missed following items in original chain. + +/* + * Please note that new inserts are done at the head of list, + * not in the middle or end. + */ +obj = kmem_cache_alloc(...); +lock_chain(); // typically a spin_lock() +obj->key = key; +atomic_inc(&obj->refcnt); +/* + * we need to make sure obj->key is updated before obj->next + */ +smp_wmb(); +hlist_add_head_rcu(&obj->obj_node, list); +unlock_chain(); // typically a spin_unlock() + + +3) Remove algo +-------------- +Nothing special here, we can use a standard RCU hlist deletion. +But thanks to SLAB_DESTROY_BY_RCU, beware a deleted object can be reused +very very fast (before the end of RCU grace period) + +if (put_last_reference_on(obj) { + lock_chain(); // typically a spin_lock() + hlist_del_init_rcu(&obj->obj_node); + unlock_chain(); // typically a spin_unlock() + kmem_cache_free(cachep, obj); +} + + + +-------------------------------------------------------------------------- +With hlist_nulls we can avoid extra smp_rmb() in lockless_lookup() +and extra smp_wmb() in insert function. + +For example, if we choose to store the slot number as the 'nulls' +end-of-list marker for each slot of the hash table, we can detect +a race (some writer did a delete and/or a move of an object +to another chain) checking the final 'nulls' value if +the lookup met the end of chain. If final 'nulls' value +is not the slot number, then we must restart the lookup at +the begining. If the object was moved to same chain, +then the reader doesnt care : It might eventually +scan the list again without harm. + + +1) lookup algo + + head = &table[slot]; + rcu_read_lock(); +begin: + hlist_nulls_for_each_entry_rcu(obj, node, head, member) { + if (obj->key == key) { + if (!try_get_ref(obj)) // might fail for free objects + goto begin; + if (obj->key != key) { // not the object we expected + put_ref(obj); + goto begin; + } + goto out; + } +/* + * if the nulls value we got at the end of this lookup is + * not the expected one, we must restart lookup. + * We probably met an item that was moved to another chain. + */ + if (get_nulls_value(node) != slot) + goto begin; + obj = NULL; + +out: + rcu_read_unlock(); + +2) Insert function : +-------------------- + +/* + * Please note that new inserts are done at the head of list, + * not in the middle or end. + */ +obj = kmem_cache_alloc(cachep); +lock_chain(); // typically a spin_lock() +obj->key = key; +atomic_set(&obj->refcnt, 1); +/* + * insert obj in RCU way (readers might be traversing chain) + */ +hlist_nulls_add_head_rcu(&obj->obj_node, list); +unlock_chain(); // typically a spin_unlock() -- cgit v1.2.3 From dd9c0e363cef32b7d6f23d4c87e8dfe4f91fd1c5 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Sun, 16 Nov 2008 22:55:08 -0800 Subject: dccp: Deprecate Ack Ratio sysctl This patch deprecates the Ack Ratio sysctl, since * Ack Ratio is entirely ignored by CCID-3 and CCID-4, * Ack Ratio currently doesn't work in CCID-2 (i.e. is always set to 1); * even if it would work in CCID-2, there is no point for a user to change it: - Ack Ratio is constrained by cwnd (RFC 4341, 6.1.2), - if Ack Ratio > cwnd, the system resorts to spurious RTO timeouts (since waiting for Acks which will never arrive in this window), - cwnd is not a user-configurable value. The only reasonable place for Ack Ratio is to print it for debugging. It is planned to do this later on, as part of e.g. dccp_probe. With this patch Ack Ratio is now under full control of feature negotiation: * Ack Ratio is resolved as a dependency of the selected CCID; * if the chosen CCID supports it (i.e. CCID == CCID-2), Ack Ratio is set to the default of 2, following RFC 4340, 11.3 - "New connections start with Ack Ratio 2 for both endpoints"; * what happens then is part of another patch set, since it concerns the dynamic update of Ack Ratio while the connection is in full flight. Thanks to Tomasz Grobelny for discussion leading up to this patch. Signed-off-by: Gerrit Renker Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- Documentation/networking/dccp.txt | 3 --- include/linux/dccp.h | 2 -- net/dccp/dccp.h | 1 - net/dccp/minisocks.c | 1 - net/dccp/options.c | 1 - net/dccp/sysctl.c | 7 ------- 6 files changed, 15 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index f0aeb20fa63b..43df4487379b 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -125,9 +125,6 @@ send_ndp = 1 send_ackvec = 1 Whether or not to send Ack Vector options (sec. 11.5). -ack_ratio = 2 - The default Ack Ratio (sec. 11.3) to use. - tx_ccid = 2 Default CCID for the sender-receiver half-connection. diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 5a5a89935dbc..eda389ce04f4 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -368,7 +368,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * @dccpms_ccid - Congestion Control Id (CCID) (section 10) * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2) - * @dccpms_ack_ratio - Ack Ratio Feature (section 11.3) * @dccpms_pending - List of features being negotiated * @dccpms_conf - */ @@ -378,7 +377,6 @@ struct dccp_minisock { __u8 dccpms_tx_ccid; __u8 dccpms_send_ack_vector; __u8 dccpms_send_ndp_count; - __u8 dccpms_ack_ratio; struct list_head dccpms_pending; struct list_head dccpms_conf; }; diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index e656dafb5d96..031ce350d3c1 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -98,7 +98,6 @@ extern int sysctl_dccp_retries2; extern int sysctl_dccp_feat_sequence_window; extern int sysctl_dccp_feat_rx_ccid; extern int sysctl_dccp_feat_tx_ccid; -extern int sysctl_dccp_feat_ack_ratio; extern int sysctl_dccp_feat_send_ack_vector; extern int sysctl_dccp_feat_send_ndp_count; extern int sysctl_dccp_tx_qlen; diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index afdacbb94d75..ed61bc58e41e 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -47,7 +47,6 @@ void dccp_minisock_init(struct dccp_minisock *dmsk) dmsk->dccpms_sequence_window = sysctl_dccp_feat_sequence_window; dmsk->dccpms_rx_ccid = sysctl_dccp_feat_rx_ccid; dmsk->dccpms_tx_ccid = sysctl_dccp_feat_tx_ccid; - dmsk->dccpms_ack_ratio = sysctl_dccp_feat_ack_ratio; dmsk->dccpms_send_ack_vector = sysctl_dccp_feat_send_ack_vector; dmsk->dccpms_send_ndp_count = sysctl_dccp_feat_send_ndp_count; } diff --git a/net/dccp/options.c b/net/dccp/options.c index 67a171a1268c..515ad45013ad 100644 --- a/net/dccp/options.c +++ b/net/dccp/options.c @@ -26,7 +26,6 @@ int sysctl_dccp_feat_sequence_window = DCCPF_INITIAL_SEQUENCE_WINDOW; int sysctl_dccp_feat_rx_ccid = DCCPF_INITIAL_CCID; int sysctl_dccp_feat_tx_ccid = DCCPF_INITIAL_CCID; -int sysctl_dccp_feat_ack_ratio = DCCPF_INITIAL_ACK_RATIO; int sysctl_dccp_feat_send_ack_vector = DCCPF_INITIAL_SEND_ACK_VECTOR; int sysctl_dccp_feat_send_ndp_count = DCCPF_INITIAL_SEND_NDP_COUNT; diff --git a/net/dccp/sysctl.c b/net/dccp/sysctl.c index 21295993fdb8..f6e54f433e29 100644 --- a/net/dccp/sysctl.c +++ b/net/dccp/sysctl.c @@ -40,13 +40,6 @@ static struct ctl_table dccp_default_table[] = { .mode = 0644, .proc_handler = proc_dointvec, }, - { - .procname = "ack_ratio", - .data = &sysctl_dccp_feat_ack_ratio, - .maxlen = sizeof(sysctl_dccp_feat_ack_ratio), - .mode = 0644, - .proc_handler = proc_dointvec, - }, { .procname = "send_ackvec", .data = &sysctl_dccp_feat_send_ack_vector, -- cgit v1.2.3 From 5b2d1ecac2a79b9438aed731557b8912564cedfd Mon Sep 17 00:00:00 2001 From: Vincent Petry Date: Tue, 18 Nov 2008 22:21:57 +0800 Subject: ALSA: hda: Added Realtek ALC888 model entry for Acer Aspire 4930G laptop Added Realtek ALC888 model entry for the Acer Aspire 4930G laptop that fixes the following features: - internal microphone - heaphone jack sense - channel mode Signed-off-by: Vincent Petry Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_realtek.c | 115 ++++++++++++++++++++++++ 2 files changed, 116 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3ab5fb1357a2..010aa66ab920 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -903,6 +903,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 6stack-dig-demo 6-jack digital for Intel demo board acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc) acer-aspire Acer Aspire 9810 + acer-aspire-4930g Acer Aspire 4930G medion Medion Laptops medion-md2 Medion MD2 targa-dig Targa/MSI diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b7d34390eff4..6ec56c62cb18 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -216,6 +216,7 @@ enum { ALC883_TARGA_2ch_DIG, ALC883_ACER, ALC883_ACER_ASPIRE, + ALC888_ACER_ASPIRE_4930G, ALC883_MEDION, ALC883_MEDION_MD2, ALC883_LAPTOP_EAPD, @@ -1154,6 +1155,90 @@ static void alc_fix_pincfg(struct hda_codec *codec, } } +/* + * ALC888 Acer Aspire 4930G model + */ + +static struct hda_verb alc888_acer_aspire_4930g_verbs[] = { +/* Front Mic: set to PIN_IN (empty by default) */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, +/* Unselect Front Mic by default in input mixer 3 */ + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)}, +/* enable unsolicited event fpr HP jack */ + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, +/* Connect Internal HP to front */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, +/* Connect HP out to front */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, + { } +}; + +static struct hda_input_mux alc888_acer_aspire_4930g_capture_source[2] = { + /* Front mic only available on one ADC */ + { + .num_items = 4, + .items = { + { "Mic", 0x0 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + { "Front Mic", 0xb }, + }, + }, + { + .num_items = 3, + .items = { + { "Mic", 0x0 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + }, + } +}; + +static struct snd_kcontrol_new alc888_acer_aspire_4930g_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), + HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, + HDA_OUTPUT), + HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), + HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), + HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), + { } /* end */ +}; + +static void alc888_acer_aspire_4930g_automute(struct hda_codec *codec) +{ + unsigned int present; + present = snd_hda_codec_read(codec, 0x15, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + /* Toggle the internal HP PIN (regular muting doesn't work) */ + snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, + (present ? 0x0 : PIN_OUT)); +} + +static void alc888_acer_aspire_4930g_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + if (res >> 26 == ALC880_HP_EVENT) + alc888_acer_aspire_4930g_automute(codec); +} + /* * ALC880 3-stack model * @@ -6887,8 +6972,15 @@ static hda_nid_t alc883_adc_nids_alt[1] = { 0x08, }; +static hda_nid_t alc883_adc_nids_rev[2] = { + /* ADC2-1 */ + 0x09, 0x08 +}; + static hda_nid_t alc883_capsrc_nids[2] = { 0x23, 0x22 }; +static hda_nid_t alc883_capsrc_nids_rev[2] = { 0x22, 0x23 }; + /* input MUX */ /* FIXME: should be a matrix-type input source selection */ @@ -8180,6 +8272,7 @@ static const char *alc883_models[ALC883_MODEL_LAST] = { [ALC883_TARGA_2ch_DIG] = "targa-2ch-dig", [ALC883_ACER] = "acer", [ALC883_ACER_ASPIRE] = "acer-aspire", + [ALC888_ACER_ASPIRE_4930G] = "acer-aspire-4930g", [ALC883_MEDION] = "medion", [ALC883_MEDION_MD2] = "medion-md2", [ALC883_LAPTOP_EAPD] = "laptop-eapd", @@ -8205,6 +8298,8 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x0110, "Acer Aspire", ALC883_ACER_ASPIRE), SND_PCI_QUIRK(0x1025, 0x0112, "Acer Aspire 9303", ALC883_ACER_ASPIRE), SND_PCI_QUIRK(0x1025, 0x0121, "Acer Aspire 5920G", ALC883_ACER_ASPIRE), + SND_PCI_QUIRK(0x1025, 0x013e, "Acer Aspire 4930G", + ALC888_ACER_ASPIRE_4930G), SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */ SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL), SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG), @@ -8376,6 +8471,26 @@ static struct alc_config_preset alc883_presets[] = { .unsol_event = alc883_acer_aspire_unsol_event, .init_hook = alc883_acer_aspire_automute, }, + [ALC888_ACER_ASPIRE_4930G] = { + .mixers = { alc888_acer_aspire_4930g_mixer, + alc883_chmode_mixer }, + .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs, + alc888_acer_aspire_4930g_verbs }, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev), + .adc_nids = alc883_adc_nids_rev, + .capsrc_nids = alc883_capsrc_nids_rev, + .dig_out_nid = ALC883_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes), + .channel_mode = alc883_3ST_6ch_modes, + .need_dac_fix = 1, + .num_mux_defs = + ARRAY_SIZE(alc888_acer_aspire_4930g_capture_source), + .input_mux = alc888_acer_aspire_4930g_capture_source, + .unsol_event = alc888_acer_aspire_4930g_unsol_event, + .init_hook = alc888_acer_aspire_4930g_automute, + }, [ALC883_MEDION] = { .mixers = { alc883_fivestack_mixer, alc883_chmode_mixer }, -- cgit v1.2.3 From 1725b82a6e2721612a3572d0336f51f1f1c3cf54 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 21 Nov 2008 02:25:48 +0100 Subject: ALSA: hda - make laptop-eapd model back for AD1986A The changes specific for Samsung laptops seem unapplicable to other hardware models like ASUS. The mic inputs are lost on such hardware by the change 5d5d5f43f1b835c375de9bd270cce030d16e2871. This patch adds back the old laptop-eapd model, and create a new model "samsung" for the new one specific to Samsung laptops with automatic mic selection feature. Reference: kernel bugzilla #12070 http://bugzilla.kernel.org/show_bug.cgi?id=12070 Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 3 +- sound/pci/hda/patch_analog.c | 49 +++++++++++++++++++++++-- 2 files changed, 48 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 010aa66ab920..e55081fdc8ab 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -984,9 +984,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 6stack 6-jack, separate surrounds (default) 3stack 3-stack, shared surrounds laptop 2-channel only (FSC V2060, Samsung M50) - laptop-eapd 2-channel with EAPD (Samsung R65, ASUS A6J) + laptop-eapd 2-channel with EAPD (ASUS A6J) laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100) ultra 2-channel with EAPD (Samsung Ultra tablet PC) + samsung 2-channel with EAPD (Samsung R65) AD1988/AD1988B/AD1989A/AD1989B 6stack 6-jack diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 032cbb4bd985..0cc6be12b8b7 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -638,6 +638,36 @@ static struct hda_input_mux ad1986a_automic_capture_source = { }; static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = { + HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol), + HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw), + HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT), + HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Capture Source", + .info = ad198x_mux_enum_info, + .get = ad198x_mux_enum_get, + .put = ad198x_mux_enum_put, + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "External Amplifier", + .info = ad198x_eapd_info, + .get = ad198x_eapd_get, + .put = ad198x_eapd_put, + .private_value = 0x1b | (1 << 8), /* port-D, inversed */ + }, + { } /* end */ +}; + +static struct snd_kcontrol_new ad1986a_samsung_mixers[] = { HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol), HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw), HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT), @@ -930,6 +960,7 @@ enum { AD1986A_LAPTOP_EAPD, AD1986A_LAPTOP_AUTOMUTE, AD1986A_ULTRA, + AD1986A_SAMSUNG, AD1986A_MODELS }; @@ -940,6 +971,7 @@ static const char *ad1986a_models[AD1986A_MODELS] = { [AD1986A_LAPTOP_EAPD] = "laptop-eapd", [AD1986A_LAPTOP_AUTOMUTE] = "laptop-automute", [AD1986A_ULTRA] = "ultra", + [AD1986A_SAMSUNG] = "samsung", }; static struct snd_pci_quirk ad1986a_cfg_tbl[] = { @@ -962,9 +994,9 @@ static struct snd_pci_quirk ad1986a_cfg_tbl[] = { SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba", AD1986A_LAPTOP_EAPD), SND_PCI_QUIRK(0x144d, 0xb03c, "Samsung R55", AD1986A_3STACK), SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_LAPTOP), - SND_PCI_QUIRK(0x144d, 0xc023, "Samsung X60", AD1986A_LAPTOP_EAPD), - SND_PCI_QUIRK(0x144d, 0xc024, "Samsung R65", AD1986A_LAPTOP_EAPD), - SND_PCI_QUIRK(0x144d, 0xc026, "Samsung X11", AD1986A_LAPTOP_EAPD), + SND_PCI_QUIRK(0x144d, 0xc023, "Samsung X60", AD1986A_SAMSUNG), + SND_PCI_QUIRK(0x144d, 0xc024, "Samsung R65", AD1986A_SAMSUNG), + SND_PCI_QUIRK(0x144d, 0xc026, "Samsung X11", AD1986A_SAMSUNG), SND_PCI_QUIRK(0x144d, 0xc027, "Samsung Q1", AD1986A_ULTRA), SND_PCI_QUIRK(0x144d, 0xc504, "Samsung Q35", AD1986A_3STACK), SND_PCI_QUIRK(0x17aa, 0x1011, "Lenovo M55", AD1986A_LAPTOP), @@ -1046,6 +1078,17 @@ static int patch_ad1986a(struct hda_codec *codec) break; case AD1986A_LAPTOP_EAPD: spec->mixers[0] = ad1986a_laptop_eapd_mixers; + spec->num_init_verbs = 2; + spec->init_verbs[1] = ad1986a_eapd_init_verbs; + spec->multiout.max_channels = 2; + spec->multiout.num_dacs = 1; + spec->multiout.dac_nids = ad1986a_laptop_dac_nids; + if (!is_jack_available(codec, 0x25)) + spec->multiout.dig_out_nid = 0; + spec->input_mux = &ad1986a_laptop_eapd_capture_source; + break; + case AD1986A_SAMSUNG: + spec->mixers[0] = ad1986a_samsung_mixers; spec->num_init_verbs = 3; spec->init_verbs[1] = ad1986a_eapd_init_verbs; spec->init_verbs[2] = ad1986a_automic_verbs; -- cgit v1.2.3 From 875065491fba8eb13219f16c36e79a6fb4e15c68 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 18 Nov 2008 20:50:34 +0000 Subject: ASoC: Rename snd_soc_card to snd_soc_machine One of the issues with the ASoC v1 API which has been addressed in the ASoC v2 work that Liam Girdwood has done is that the ALSA card provided by ASoC is distributed around the ASoC structures. For example, machine wide data such as the struct snd_card are maintained as part of the CODEC data structure, preventing the use of multiple codecs. This has been addressed by refactoring the data structures so that all the data for the ALSA card is contained in a single structure snd_soc_card which replaces the existing snd_soc_machine and snd_soc_device. Begin the process of backporting this by renaming struct snd_soc_machine to struct snd_soc_card, better reflecting its function and bringing it closer to standard ALSA terminology. Signed-off-by: Mark Brown --- Documentation/sound/alsa/soc/machine.txt | 8 +-- include/sound/soc.h | 8 +-- sound/soc/atmel/playpaq_wm8510.c | 4 +- sound/soc/atmel/sam9g20_wm8731.c | 4 +- sound/soc/au1x/sample-ac97.c | 4 +- sound/soc/blackfin/bf5xx-ad1980.c | 6 +-- sound/soc/blackfin/bf5xx-ad73311.c | 6 +-- sound/soc/blackfin/bf5xx-ssm2602.c | 6 +-- sound/soc/davinci/davinci-evm.c | 4 +- sound/soc/davinci/davinci-i2s.c | 8 +-- sound/soc/davinci/davinci-sffsdr.c | 4 +- sound/soc/fsl/fsl_dma.c | 2 +- sound/soc/fsl/mpc8610_hpcd.c | 6 +-- sound/soc/fsl/soc-of-simple.c | 10 ++-- sound/soc/omap/n810.c | 4 +- sound/soc/omap/omap2evm.c | 4 +- sound/soc/omap/omap3beagle.c | 4 +- sound/soc/omap/osk5912.c | 4 +- sound/soc/omap/overo.c | 4 +- sound/soc/pxa/corgi.c | 4 +- sound/soc/pxa/e800_wm9712.c | 6 +-- sound/soc/pxa/em-x270.c | 4 +- sound/soc/pxa/palm27x.c | 4 +- sound/soc/pxa/poodle.c | 4 +- sound/soc/pxa/spitz.c | 4 +- sound/soc/pxa/tosa.c | 6 +-- sound/soc/s3c24xx/ln2440sbc_alc650.c | 6 +-- sound/soc/s3c24xx/neo1973_wm8753.c | 6 +-- sound/soc/s3c24xx/s3c24xx_uda134x.c | 4 +- sound/soc/s3c24xx/smdk2443_wm9710.c | 6 +-- sound/soc/sh/sh7760-ac97.c | 4 +- sound/soc/soc-core.c | 90 ++++++++++++++++---------------- sound/soc/soc-dapm.c | 6 +-- 33 files changed, 127 insertions(+), 127 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt index f370e7db86af..4a9f51e2905c 100644 --- a/Documentation/sound/alsa/soc/machine.txt +++ b/Documentation/sound/alsa/soc/machine.txt @@ -9,7 +9,7 @@ the audio subsystem with the kernel as a platform device and is represented by the following struct:- /* SoC machine */ -struct snd_soc_machine { +struct snd_soc_card {_ char *name; int (*probe)(struct platform_device *pdev); @@ -67,10 +67,10 @@ static struct snd_soc_dai_link corgi_dai = { .ops = &corgi_ops, }; -struct snd_soc_machine then sets up the machine with it's DAIs. e.g. +struct snd_soc_card then sets up the machine with it's DAIs. e.g. /* corgi audio machine driver */ -static struct snd_soc_machine snd_soc_machine_corgi = { +static struct snd_soc_card snd_soc_corgi = { .name = "Corgi", .dai_link = &corgi_dai, .num_links = 1, @@ -90,7 +90,7 @@ static struct wm8731_setup_data corgi_wm8731_setup = { /* corgi audio subsystem */ static struct snd_soc_device corgi_snd_devdata = { - .machine = &snd_soc_machine_corgi, + .machine = &snd_soc_corgi, .platform = &pxa2xx_soc_platform, .codec_dev = &soc_codec_dev_wm8731, .codec_data = &corgi_wm8731_setup, diff --git a/include/sound/soc.h b/include/sound/soc.h index 077dfe4e51f0..3be17b3c650c 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -482,8 +482,8 @@ struct snd_soc_dai_link { struct snd_pcm *pcm; }; -/* SoC machine */ -struct snd_soc_machine { +/* SoC card */ +struct snd_soc_card { char *name; int (*probe)(struct platform_device *pdev); @@ -497,7 +497,7 @@ struct snd_soc_machine { int (*resume_post)(struct platform_device *pdev); /* callbacks */ - int (*set_bias_level)(struct snd_soc_machine *, + int (*set_bias_level)(struct snd_soc_card *, enum snd_soc_bias_level level); /* CPU <--> Codec DAI links */ @@ -508,7 +508,7 @@ struct snd_soc_machine { /* SoC Device - the audio subsystem */ struct snd_soc_device { struct device *dev; - struct snd_soc_machine *machine; + struct snd_soc_card *card; struct snd_soc_platform *platform; struct snd_soc_codec *codec; struct snd_soc_codec_device *codec_dev; diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c index ea7935d2a66d..d40b5a52a8d2 100644 --- a/sound/soc/atmel/playpaq_wm8510.c +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -361,7 +361,7 @@ static struct snd_soc_dai_link playpaq_wm8510_dai = { -static struct snd_soc_machine snd_soc_machine_playpaq = { +static struct snd_soc_card snd_soc_playpaq = { .name = "LRS_PlayPaq_WM8510", .dai_link = &playpaq_wm8510_dai, .num_links = 1, @@ -377,7 +377,7 @@ static struct wm8510_setup_data playpaq_wm8510_setup = { static struct snd_soc_device playpaq_wm8510_snd_devdata = { - .machine = &snd_soc_machine_playpaq, + .card = &snd_soc_playpaq, .platform = &at32_soc_platform, .codec_dev = &soc_codec_dev_wm8510, .codec_data = &playpaq_wm8510_setup, diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index 710addcc66b3..fdc1d0206e0b 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -242,7 +242,7 @@ static struct snd_soc_dai_link at91sam9g20ek_dai = { .ops = &at91sam9g20ek_ops, }; -static struct snd_soc_machine snd_soc_machine_at91sam9g20ek = { +static struct snd_soc_card snd_soc_at91sam9g20ek = { .name = "WM8731", .dai_link = &at91sam9g20ek_dai, .num_links = 1, @@ -254,7 +254,7 @@ static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = { }; static struct snd_soc_device at91sam9g20ek_snd_devdata = { - .machine = &snd_soc_machine_at91sam9g20ek, + .card = &snd_soc_at91sam9g20ek, .platform = &atmel_soc_platform, .codec_dev = &soc_codec_dev_wm8731, .codec_data = &at91sam9g20ek_wm8731_setup, diff --git a/sound/soc/au1x/sample-ac97.c b/sound/soc/au1x/sample-ac97.c index f75ae7f62c3d..27683eb7905e 100644 --- a/sound/soc/au1x/sample-ac97.c +++ b/sound/soc/au1x/sample-ac97.c @@ -42,14 +42,14 @@ static struct snd_soc_dai_link au1xpsc_sample_ac97_dai = { .ops = NULL, }; -static struct snd_soc_machine au1xpsc_sample_ac97_machine = { +static struct snd_soc_card au1xpsc_sample_ac97_machine = { .name = "Au1xxx PSC AC97 Audio", .dai_link = &au1xpsc_sample_ac97_dai, .num_links = 1, }; static struct snd_soc_device au1xpsc_sample_ac97_devdata = { - .machine = &au1xpsc_sample_ac97_machine, + .card = &au1xpsc_sample_ac97_machine, .platform = &au1xpsc_soc_platform, /* see dbdma2.c */ .codec_dev = &soc_codec_dev_ac97, }; diff --git a/sound/soc/blackfin/bf5xx-ad1980.c b/sound/soc/blackfin/bf5xx-ad1980.c index 124425d22320..36c569a43ce1 100644 --- a/sound/soc/blackfin/bf5xx-ad1980.c +++ b/sound/soc/blackfin/bf5xx-ad1980.c @@ -43,7 +43,7 @@ #include "bf5xx-ac97-pcm.h" #include "bf5xx-ac97.h" -static struct snd_soc_machine bf5xx_board; +static struct snd_soc_card bf5xx_board; static int bf5xx_board_startup(struct snd_pcm_substream *substream) { @@ -67,14 +67,14 @@ static struct snd_soc_dai_link bf5xx_board_dai = { .ops = &bf5xx_board_ops, }; -static struct snd_soc_machine bf5xx_board = { +static struct snd_soc_card bf5xx_board = { .name = "bf5xx-board", .dai_link = &bf5xx_board_dai, .num_links = 1, }; static struct snd_soc_device bf5xx_board_snd_devdata = { - .machine = &bf5xx_board, + .card = &bf5xx_board, .platform = &bf5xx_ac97_soc_platform, .codec_dev = &soc_codec_dev_ad1980, }; diff --git a/sound/soc/blackfin/bf5xx-ad73311.c b/sound/soc/blackfin/bf5xx-ad73311.c index 47da49b9aeac..57da14799375 100644 --- a/sound/soc/blackfin/bf5xx-ad73311.c +++ b/sound/soc/blackfin/bf5xx-ad73311.c @@ -65,7 +65,7 @@ #define GPIO_SE CONFIG_SND_BFIN_AD73311_SE -static struct snd_soc_machine bf5xx_ad73311; +static struct snd_soc_card bf5xx_ad73311; static int snd_ad73311_startup(void) { @@ -190,7 +190,7 @@ static struct snd_soc_dai_link bf5xx_ad73311_dai = { .ops = &bf5xx_ad73311_ops, }; -static struct snd_soc_machine bf5xx_ad73311 = { +static struct snd_soc_card bf5xx_ad73311 = { .name = "bf5xx_ad73311", .probe = bf5xx_probe, .dai_link = &bf5xx_ad73311_dai, @@ -198,7 +198,7 @@ static struct snd_soc_machine bf5xx_ad73311 = { }; static struct snd_soc_device bf5xx_ad73311_snd_devdata = { - .machine = &bf5xx_ad73311, + .card = &bf5xx_ad73311, .platform = &bf5xx_i2s_soc_platform, .codec_dev = &soc_codec_dev_ad73311, }; diff --git a/sound/soc/blackfin/bf5xx-ssm2602.c b/sound/soc/blackfin/bf5xx-ssm2602.c index 744a90e765d9..0078dfcd95b9 100644 --- a/sound/soc/blackfin/bf5xx-ssm2602.c +++ b/sound/soc/blackfin/bf5xx-ssm2602.c @@ -44,7 +44,7 @@ #include "bf5xx-i2s-pcm.h" #include "bf5xx-i2s.h" -static struct snd_soc_machine bf5xx_ssm2602; +static struct snd_soc_card bf5xx_ssm2602; static int bf5xx_ssm2602_startup(struct snd_pcm_substream *substream) { @@ -135,14 +135,14 @@ static struct ssm2602_setup_data bf5xx_ssm2602_setup = { .i2c_address = 0x1b, }; -static struct snd_soc_machine bf5xx_ssm2602 = { +static struct snd_soc_card bf5xx_ssm2602 = { .name = "bf5xx_ssm2602", .dai_link = &bf5xx_ssm2602_dai, .num_links = 1, }; static struct snd_soc_device bf5xx_ssm2602_snd_devdata = { - .machine = &bf5xx_ssm2602, + .card = &bf5xx_ssm2602, .platform = &bf5xx_i2s_soc_platform, .codec_dev = &soc_codec_dev_ssm2602, .codec_data = &bf5xx_ssm2602_setup, diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index 9e6062cd6b59..2ce34d44b15c 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -128,7 +128,7 @@ static struct snd_soc_dai_link evm_dai = { }; /* davinci-evm audio machine driver */ -static struct snd_soc_machine snd_soc_machine_evm = { +static struct snd_soc_card snd_soc_card_evm = { .name = "DaVinci EVM", .dai_link = &evm_dai, .num_links = 1, @@ -142,7 +142,7 @@ static struct aic3x_setup_data evm_aic3x_setup = { /* evm audio subsystem */ static struct snd_soc_device evm_snd_devdata = { - .machine = &snd_soc_machine_evm, + .card = &snd_soc_card_evm, .platform = &davinci_soc_platform, .codec_dev = &soc_codec_dev_aic3x, .codec_data = &evm_aic3x_setup, diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c index 11c20d0b7bcc..95df51e803b4 100644 --- a/sound/soc/davinci/davinci-i2s.c +++ b/sound/soc/davinci/davinci-i2s.c @@ -375,8 +375,8 @@ static int davinci_i2s_probe(struct platform_device *pdev, struct snd_soc_dai *dai) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_machine *machine = socdev->machine; - struct snd_soc_dai *cpu_dai = machine->dai_link[pdev->id].cpu_dai; + struct snd_soc_card *card = socdev->card; + struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai; struct davinci_mcbsp_dev *dev; struct resource *mem, *ioarea; struct evm_snd_platform_data *pdata; @@ -437,8 +437,8 @@ static void davinci_i2s_remove(struct platform_device *pdev, struct snd_soc_dai *dai) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_machine *machine = socdev->machine; - struct snd_soc_dai *cpu_dai = machine->dai_link[pdev->id].cpu_dai; + struct snd_soc_card *card = socdev->card; + struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai; struct davinci_mcbsp_dev *dev = cpu_dai->private_data; struct resource *mem; diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c index 69a8a769f4d8..fa38f9cd3506 100644 --- a/sound/soc/davinci/davinci-sffsdr.c +++ b/sound/soc/davinci/davinci-sffsdr.c @@ -73,7 +73,7 @@ static struct snd_soc_dai_link sffsdr_dai = { }; /* davinci-sffsdr audio machine driver */ -static struct snd_soc_machine snd_soc_machine_sffsdr = { +static struct snd_soc_card snd_soc_sffsdr = { .name = "DaVinci SFFSDR", .dai_link = &sffsdr_dai, .num_links = 1, @@ -89,7 +89,7 @@ static struct pcm3008_setup_data sffsdr_pcm3008_setup = { /* sffsdr audio subsystem */ static struct snd_soc_device sffsdr_snd_devdata = { - .machine = &snd_soc_machine_sffsdr, + .card = &snd_soc_sffsdr, .platform = &davinci_soc_platform, .codec_dev = &soc_codec_dev_pcm3008, .codec_data = &sffsdr_pcm3008_setup, diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index d2d3da9729f2..bf92331b4768 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -284,7 +284,7 @@ static irqreturn_t fsl_dma_isr(int irq, void *dev_id) * fsl_dma_new: initialize this PCM driver. * * This function is called when the codec driver calls snd_soc_new_pcms(), - * once for each .dai_link in the machine driver's snd_soc_machine + * once for each .dai_link in the machine driver's snd_soc_card * structure. */ static int fsl_dma_new(struct snd_card *card, struct snd_soc_dai *dai, diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index 94f89debde1f..1cf4d6eeb538 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -29,7 +29,7 @@ struct mpc8610_hpcd_data { struct snd_soc_device sound_devdata; struct snd_soc_dai_link dai; - struct snd_soc_machine machine; + struct snd_soc_card machine; unsigned int dai_format; unsigned int codec_clk_direction; unsigned int cpu_clk_direction; @@ -185,7 +185,7 @@ static struct snd_soc_ops mpc8610_hpcd_ops = { /** * mpc8610_hpcd_machine: ASoC machine data */ -static struct snd_soc_machine mpc8610_hpcd_machine = { +static struct snd_soc_card mpc8610_hpcd_machine = { .probe = mpc8610_hpcd_machine_probe, .remove = mpc8610_hpcd_machine_remove, .name = "MPC8610 HPCD", @@ -465,7 +465,7 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev, goto error; } - machine_data->sound_devdata.machine = &mpc8610_hpcd_machine; + machine_data->sound_devdata.card = &mpc8610_hpcd_machine; machine_data->sound_devdata.codec_dev = &soc_codec_device_cs4270; machine_data->sound_devdata.platform = &fsl_soc_platform; diff --git a/sound/soc/fsl/soc-of-simple.c b/sound/soc/fsl/soc-of-simple.c index 0382fdac51cd..53be6491320a 100644 --- a/sound/soc/fsl/soc-of-simple.c +++ b/sound/soc/fsl/soc-of-simple.c @@ -31,7 +31,7 @@ struct of_snd_soc_device { int id; struct list_head list; struct snd_soc_device device; - struct snd_soc_machine machine; + struct snd_soc_card card; struct snd_soc_dai_link dai_link; struct platform_device *pdev; struct device_node *platform_node; @@ -58,9 +58,9 @@ of_snd_soc_get_device(struct device_node *codec_node) /* Initialize the structure and add it to the global list */ of_soc->codec_node = codec_node; of_soc->id = of_snd_soc_next_index++; - of_soc->machine.dai_link = &of_soc->dai_link; - of_soc->machine.num_links = 1; - of_soc->device.machine = &of_soc->machine; + of_soc->card.dai_link = &of_soc->dai_link; + of_soc->card.num_links = 1; + of_soc->device.card = &of_soc->card; of_soc->dai_link.ops = &of_snd_soc_ops; list_add(&of_soc->list, &of_snd_soc_device_list); @@ -159,7 +159,7 @@ int of_snd_soc_register_platform(struct snd_soc_platform *platform, of_soc->platform_node = node; of_soc->dai_link.cpu_dai = cpu_dai; of_soc->device.platform = platform; - of_soc->machine.name = of_soc->dai_link.cpu_dai->name; + of_soc->card.name = of_soc->dai_link.cpu_dai->name; /* Now try to register the SoC device */ of_snd_soc_register_device(of_soc); diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index fae3ad36e0bf..d216b4f9e14e 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -282,7 +282,7 @@ static struct snd_soc_dai_link n810_dai = { }; /* Audio machine driver */ -static struct snd_soc_machine snd_soc_machine_n810 = { +static struct snd_soc_card snd_soc_n810 = { .name = "N810", .dai_link = &n810_dai, .num_links = 1, @@ -298,7 +298,7 @@ static struct aic3x_setup_data n810_aic33_setup = { /* Audio subsystem */ static struct snd_soc_device n810_snd_devdata = { - .machine = &snd_soc_machine_n810, + .card = &snd_soc_n810, .platform = &omap_soc_platform, .codec_dev = &soc_codec_dev_aic3x, .codec_data = &n810_aic33_setup, diff --git a/sound/soc/omap/omap2evm.c b/sound/soc/omap/omap2evm.c index c37621357d00..5bea31157a94 100644 --- a/sound/soc/omap/omap2evm.c +++ b/sound/soc/omap/omap2evm.c @@ -90,7 +90,7 @@ static struct snd_soc_dai_link omap2evm_dai = { }; /* Audio machine driver */ -static struct snd_soc_machine snd_soc_machine_omap2evm = { +static struct snd_soc_card snd_soc_omap2evm = { .name = "omap2evm", .dai_link = &omap2evm_dai, .num_links = 1, @@ -98,7 +98,7 @@ static struct snd_soc_machine snd_soc_machine_omap2evm = { /* Audio subsystem */ static struct snd_soc_device omap2evm_snd_devdata = { - .machine = &snd_soc_machine_omap2evm, + .card = &snd_soc_omap2evm, .platform = &omap_soc_platform, .codec_dev = &soc_codec_dev_twl4030, }; diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c index ec84a9bbc563..3ed25464627f 100644 --- a/sound/soc/omap/omap3beagle.c +++ b/sound/soc/omap/omap3beagle.c @@ -88,7 +88,7 @@ static struct snd_soc_dai_link omap3beagle_dai = { }; /* Audio machine driver */ -static struct snd_soc_machine snd_soc_machine_omap3beagle = { +static struct snd_soc_card snd_soc_omap3beagle = { .name = "omap3beagle", .dai_link = &omap3beagle_dai, .num_links = 1, @@ -96,7 +96,7 @@ static struct snd_soc_machine snd_soc_machine_omap3beagle = { /* Audio subsystem */ static struct snd_soc_device omap3beagle_snd_devdata = { - .machine = &snd_soc_machine_omap3beagle, + .card = &snd_soc_omap3beagle, .platform = &omap_soc_platform, .codec_dev = &soc_codec_dev_twl4030, }; diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c index 0fe733796898..7a8f14d0c772 100644 --- a/sound/soc/omap/osk5912.c +++ b/sound/soc/omap/osk5912.c @@ -143,7 +143,7 @@ static struct snd_soc_dai_link osk_dai = { }; /* Audio machine driver */ -static struct snd_soc_machine snd_soc_machine_osk = { +static struct snd_soc_card snd_soc_card_osk = { .name = "OSK5912", .dai_link = &osk_dai, .num_links = 1, @@ -151,7 +151,7 @@ static struct snd_soc_machine snd_soc_machine_osk = { /* Audio subsystem */ static struct snd_soc_device osk_snd_devdata = { - .machine = &snd_soc_machine_osk, + .card = &snd_soc_card_osk, .platform = &omap_soc_platform, .codec_dev = &soc_codec_dev_tlv320aic23, }; diff --git a/sound/soc/omap/overo.c b/sound/soc/omap/overo.c index c26d1de7da51..eea0c372bb3f 100644 --- a/sound/soc/omap/overo.c +++ b/sound/soc/omap/overo.c @@ -88,7 +88,7 @@ static struct snd_soc_dai_link overo_dai = { }; /* Audio machine driver */ -static struct snd_soc_machine snd_soc_machine_overo = { +static struct snd_soc_card snd_soc_card_overo = { .name = "overo", .dai_link = &overo_dai, .num_links = 1, @@ -96,7 +96,7 @@ static struct snd_soc_machine snd_soc_machine_overo = { /* Audio subsystem */ static struct snd_soc_device overo_snd_devdata = { - .machine = &snd_soc_machine_overo, + .card = &snd_soc_card_overo, .platform = &omap_soc_platform, .codec_dev = &soc_codec_dev_twl4030, }; diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index 2718eaf7895f..647f056a3cb3 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -314,7 +314,7 @@ static struct snd_soc_dai_link corgi_dai = { }; /* corgi audio machine driver */ -static struct snd_soc_machine snd_soc_machine_corgi = { +static struct snd_soc_card snd_soc_corgi = { .name = "Corgi", .dai_link = &corgi_dai, .num_links = 1, @@ -328,7 +328,7 @@ static struct wm8731_setup_data corgi_wm8731_setup = { /* corgi audio subsystem */ static struct snd_soc_device corgi_snd_devdata = { - .machine = &snd_soc_machine_corgi, + .card = &snd_soc_corgi, .platform = &pxa2xx_soc_platform, .codec_dev = &soc_codec_dev_wm8731, .codec_data = &corgi_wm8731_setup, diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c index 6781c5be242f..60c64861512a 100644 --- a/sound/soc/pxa/e800_wm9712.c +++ b/sound/soc/pxa/e800_wm9712.c @@ -29,7 +29,7 @@ #include "pxa2xx-pcm.h" #include "pxa2xx-ac97.h" -static struct snd_soc_machine e800; +static struct snd_soc_card e800; static struct snd_soc_dai_link e800_dai[] = { { @@ -40,14 +40,14 @@ static struct snd_soc_dai_link e800_dai[] = { }, }; -static struct snd_soc_machine e800 = { +static struct snd_soc_card e800 = { .name = "Toshiba e800", .dai_link = e800_dai, .num_links = ARRAY_SIZE(e800_dai), }; static struct snd_soc_device e800_snd_devdata = { - .machine = &e800, + .card = &e800, .platform = &pxa2xx_soc_platform, .codec_dev = &soc_codec_dev_wm9712, }; diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c index e6ff6929ab4b..4a61925c3104 100644 --- a/sound/soc/pxa/em-x270.c +++ b/sound/soc/pxa/em-x270.c @@ -53,14 +53,14 @@ static struct snd_soc_dai_link em_x270_dai[] = { }, }; -static struct snd_soc_machine em_x270 = { +static struct snd_soc_card em_x270 = { .name = "EM-X270", .dai_link = em_x270_dai, .num_links = ARRAY_SIZE(em_x270_dai), }; static struct snd_soc_device em_x270_snd_devdata = { - .machine = &em_x270, + .card = &em_x270, .platform = &pxa2xx_soc_platform, .codec_dev = &soc_codec_dev_wm9712, }; diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c index e364abc700db..3bb8879ac8a2 100644 --- a/sound/soc/pxa/palm27x.c +++ b/sound/soc/pxa/palm27x.c @@ -189,14 +189,14 @@ static struct snd_soc_dai_link palm27x_dai[] = { }, }; -static struct snd_soc_machine palm27x_asoc = { +static struct snd_soc_card palm27x_asoc = { .name = "Palm/PXA27x", .dai_link = palm27x_dai, .num_links = ARRAY_SIZE(palm27x_dai), }; static struct snd_soc_device palm27x_snd_devdata = { - .machine = &palm27x_asoc, + .card = &palm27x_asoc, .platform = &pxa2xx_soc_platform, .codec_dev = &soc_codec_dev_wm9712, }; diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 4d9930c52789..03b510ab2824 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -276,7 +276,7 @@ static struct snd_soc_dai_link poodle_dai = { }; /* poodle audio machine driver */ -static struct snd_soc_machine snd_soc_machine_poodle = { +static struct snd_soc_card snd_soc_poodle = { .name = "Poodle", .dai_link = &poodle_dai, .num_links = 1, @@ -290,7 +290,7 @@ static struct wm8731_setup_data poodle_wm8731_setup = { /* poodle audio subsystem */ static struct snd_soc_device poodle_snd_devdata = { - .machine = &snd_soc_machine_poodle, + .card = &snd_soc_poodle, .platform = &pxa2xx_soc_platform, .codec_dev = &soc_codec_dev_wm8731, .codec_data = &poodle_wm8731_setup, diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c index d307b6757e95..579d93368f14 100644 --- a/sound/soc/pxa/spitz.c +++ b/sound/soc/pxa/spitz.c @@ -319,7 +319,7 @@ static struct snd_soc_dai_link spitz_dai = { }; /* spitz audio machine driver */ -static struct snd_soc_machine snd_soc_machine_spitz = { +static struct snd_soc_card snd_soc_spitz = { .name = "Spitz", .dai_link = &spitz_dai, .num_links = 1, @@ -333,7 +333,7 @@ static struct wm8750_setup_data spitz_wm8750_setup = { /* spitz audio subsystem */ static struct snd_soc_device spitz_snd_devdata = { - .machine = &snd_soc_machine_spitz, + .card = &snd_soc_spitz, .platform = &pxa2xx_soc_platform, .codec_dev = &soc_codec_dev_wm8750, .codec_data = &spitz_wm8750_setup, diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index afefe41b8c46..9d9be5a14d14 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -38,7 +38,7 @@ #include "pxa2xx-pcm.h" #include "pxa2xx-ac97.h" -static struct snd_soc_machine tosa; +static struct snd_soc_card tosa; #define TOSA_HP 0 #define TOSA_MIC_INT 1 @@ -230,14 +230,14 @@ static struct snd_soc_dai_link tosa_dai[] = { }, }; -static struct snd_soc_machine tosa = { +static struct snd_soc_card tosa = { .name = "Tosa", .dai_link = tosa_dai, .num_links = ARRAY_SIZE(tosa_dai), }; static struct snd_soc_device tosa_snd_devdata = { - .machine = &tosa, + .card = &tosa, .platform = &pxa2xx_soc_platform, .codec_dev = &soc_codec_dev_wm9712, }; diff --git a/sound/soc/s3c24xx/ln2440sbc_alc650.c b/sound/soc/s3c24xx/ln2440sbc_alc650.c index 4eab2c19c454..a70cbc0fa070 100644 --- a/sound/soc/s3c24xx/ln2440sbc_alc650.c +++ b/sound/soc/s3c24xx/ln2440sbc_alc650.c @@ -27,7 +27,7 @@ #include "s3c24xx-pcm.h" #include "s3c24xx-ac97.h" -static struct snd_soc_machine ln2440sbc; +static struct snd_soc_card ln2440sbc; static struct snd_soc_dai_link ln2440sbc_dai[] = { { @@ -38,14 +38,14 @@ static struct snd_soc_dai_link ln2440sbc_dai[] = { }, }; -static struct snd_soc_machine ln2440sbc = { +static struct snd_soc_card ln2440sbc = { .name = "LN2440SBC", .dai_link = ln2440sbc_dai, .num_links = ARRAY_SIZE(ln2440sbc_dai), }; static struct snd_soc_device ln2440sbc_snd_ac97_devdata = { - .machine = &ln2440sbc, + .card = &ln2440sbc, .platform = &s3c24xx_soc_platform, .codec_dev = &soc_codec_dev_ac97, }; diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index 87ddfefcc2fb..528fc3f1b45b 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -59,7 +59,7 @@ #define NEO_CAPTURE_HEADSET 7 #define NEO_CAPTURE_BLUETOOTH 8 -static struct snd_soc_machine neo1973; +static struct snd_soc_card neo1973; static struct i2c_client *i2c; static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream, @@ -579,7 +579,7 @@ static struct snd_soc_dai_link neo1973_dai[] = { }, }; -static struct snd_soc_machine neo1973 = { +static struct snd_soc_card neo1973 = { .name = "neo1973", .dai_link = neo1973_dai, .num_links = ARRAY_SIZE(neo1973_dai), @@ -591,7 +591,7 @@ static struct wm8753_setup_data neo1973_wm8753_setup = { }; static struct snd_soc_device neo1973_snd_devdata = { - .machine = &neo1973, + .card = &neo1973, .platform = &s3c24xx_soc_platform, .codec_dev = &soc_codec_dev_wm8753, .codec_data = &neo1973_wm8753_setup, diff --git a/sound/soc/s3c24xx/s3c24xx_uda134x.c b/sound/soc/s3c24xx/s3c24xx_uda134x.c index 92d90f2f6901..23325fca1f64 100644 --- a/sound/soc/s3c24xx/s3c24xx_uda134x.c +++ b/sound/soc/s3c24xx/s3c24xx_uda134x.c @@ -232,7 +232,7 @@ static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = { .ops = &s3c24xx_uda134x_ops, }; -static struct snd_soc_machine snd_soc_machine_s3c24xx_uda134x = { +static struct snd_soc_card snd_soc_s3c24xx_uda134x = { .name = "S3C24XX_UDA134X", .dai_link = &s3c24xx_uda134x_dai_link, .num_links = 1, @@ -270,7 +270,7 @@ static struct uda134x_platform_data s3c24xx_uda134x = { }; static struct snd_soc_device s3c24xx_uda134x_snd_devdata = { - .machine = &snd_soc_machine_s3c24xx_uda134x, + .card = &snd_soc_s3c24xx_uda134x, .platform = &s3c24xx_soc_platform, .codec_dev = &soc_codec_dev_uda134x, .codec_data = &s3c24xx_uda134x, diff --git a/sound/soc/s3c24xx/smdk2443_wm9710.c b/sound/soc/s3c24xx/smdk2443_wm9710.c index 8515d6ff03f2..3d2e6a0417ec 100644 --- a/sound/soc/s3c24xx/smdk2443_wm9710.c +++ b/sound/soc/s3c24xx/smdk2443_wm9710.c @@ -23,7 +23,7 @@ #include "s3c24xx-pcm.h" #include "s3c24xx-ac97.h" -static struct snd_soc_machine smdk2443; +static struct snd_soc_card smdk2443; static struct snd_soc_dai_link smdk2443_dai[] = { { @@ -34,14 +34,14 @@ static struct snd_soc_dai_link smdk2443_dai[] = { }, }; -static struct snd_soc_machine smdk2443 = { +static struct snd_soc_card smdk2443 = { .name = "SMDK2443", .dai_link = smdk2443_dai, .num_links = ARRAY_SIZE(smdk2443_dai), }; static struct snd_soc_device smdk2443_snd_ac97_devdata = { - .machine = &smdk2443, + .card = &smdk2443, .platform = &s3c24xx_soc_platform, .codec_dev = &soc_codec_dev_ac97, }; diff --git a/sound/soc/sh/sh7760-ac97.c b/sound/soc/sh/sh7760-ac97.c index 92bfaf4774a7..8b44f9c8a9ff 100644 --- a/sound/soc/sh/sh7760-ac97.c +++ b/sound/soc/sh/sh7760-ac97.c @@ -38,14 +38,14 @@ static struct snd_soc_dai_link sh7760_ac97_dai = { .ops = NULL, }; -static struct snd_soc_machine sh7760_ac97_soc_machine = { +static struct snd_soc_card sh7760_ac97_soc_machine = { .name = "SH7760 AC97", .dai_link = &sh7760_ac97_dai, .num_links = 1, }; static struct snd_soc_device sh7760_ac97_snd_devdata = { - .machine = &sh7760_ac97_soc_machine, + .card = &sh7760_ac97_soc_machine, .platform = &sh7760_soc_platform, .codec_dev = &soc_codec_dev_ac97, }; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 9feaa7b6dc34..c5cb9516fea4 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -620,7 +620,7 @@ static struct snd_pcm_ops soc_pcm_ops = { static int soc_suspend(struct platform_device *pdev, pm_message_t state) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_machine *machine = socdev->machine; + struct snd_soc_card *card = socdev->card; struct snd_soc_platform *platform = socdev->platform; struct snd_soc_codec_device *codec_dev = socdev->codec_dev; struct snd_soc_codec *codec = socdev->codec; @@ -644,14 +644,14 @@ static int soc_suspend(struct platform_device *pdev, pm_message_t state) } /* suspend all pcms */ - for (i = 0; i < machine->num_links; i++) - snd_pcm_suspend_all(machine->dai_link[i].pcm); + for (i = 0; i < card->num_links; i++) + snd_pcm_suspend_all(card->dai_link[i].pcm); - if (machine->suspend_pre) - machine->suspend_pre(pdev, state); + if (card->suspend_pre) + card->suspend_pre(pdev, state); - for (i = 0; i < machine->num_links; i++) { - struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai; + for (i = 0; i < card->num_links; i++) { + struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai; if (cpu_dai->suspend && cpu_dai->type != SND_SOC_DAI_AC97) cpu_dai->suspend(pdev, cpu_dai); if (platform->suspend) @@ -676,14 +676,14 @@ static int soc_suspend(struct platform_device *pdev, pm_message_t state) if (codec_dev->suspend) codec_dev->suspend(pdev, state); - for (i = 0; i < machine->num_links; i++) { - struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai; + for (i = 0; i < card->num_links; i++) { + struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai; if (cpu_dai->suspend && cpu_dai->type == SND_SOC_DAI_AC97) cpu_dai->suspend(pdev, cpu_dai); } - if (machine->suspend_post) - machine->suspend_post(pdev, state); + if (card->suspend_post) + card->suspend_post(pdev, state); return 0; } @@ -696,7 +696,7 @@ static void soc_resume_deferred(struct work_struct *work) struct snd_soc_device *socdev = container_of(work, struct snd_soc_device, deferred_resume_work); - struct snd_soc_machine *machine = socdev->machine; + struct snd_soc_card *card = socdev->card; struct snd_soc_platform *platform = socdev->platform; struct snd_soc_codec_device *codec_dev = socdev->codec_dev; struct snd_soc_codec *codec = socdev->codec; @@ -709,11 +709,11 @@ static void soc_resume_deferred(struct work_struct *work) dev_info(socdev->dev, "starting resume work\n"); - if (machine->resume_pre) - machine->resume_pre(pdev); + if (card->resume_pre) + card->resume_pre(pdev); - for (i = 0; i < machine->num_links; i++) { - struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai; + for (i = 0; i < card->num_links; i++) { + struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai; if (cpu_dai->resume && cpu_dai->type == SND_SOC_DAI_AC97) cpu_dai->resume(pdev, cpu_dai); } @@ -739,16 +739,16 @@ static void soc_resume_deferred(struct work_struct *work) dai->dai_ops.digital_mute(dai, 0); } - for (i = 0; i < machine->num_links; i++) { - struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai; + for (i = 0; i < card->num_links; i++) { + struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai; if (cpu_dai->resume && cpu_dai->type != SND_SOC_DAI_AC97) cpu_dai->resume(pdev, cpu_dai); if (platform->resume) platform->resume(pdev, cpu_dai); } - if (machine->resume_post) - machine->resume_post(pdev); + if (card->resume_post) + card->resume_post(pdev); dev_info(socdev->dev, "resume work completed\n"); @@ -779,18 +779,18 @@ static int soc_probe(struct platform_device *pdev) { int ret = 0, i; struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_machine *machine = socdev->machine; + struct snd_soc_card *card = socdev->card; struct snd_soc_platform *platform = socdev->platform; struct snd_soc_codec_device *codec_dev = socdev->codec_dev; - if (machine->probe) { - ret = machine->probe(pdev); + if (card->probe) { + ret = card->probe(pdev); if (ret < 0) return ret; } - for (i = 0; i < machine->num_links; i++) { - struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai; + for (i = 0; i < card->num_links; i++) { + struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai; if (cpu_dai->probe) { ret = cpu_dai->probe(pdev, cpu_dai); if (ret < 0) @@ -825,13 +825,13 @@ platform_err: cpu_dai_err: for (i--; i >= 0; i--) { - struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai; + struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai; if (cpu_dai->remove) cpu_dai->remove(pdev, cpu_dai); } - if (machine->remove) - machine->remove(pdev); + if (card->remove) + card->remove(pdev); return ret; } @@ -841,7 +841,7 @@ static int soc_remove(struct platform_device *pdev) { int i; struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_machine *machine = socdev->machine; + struct snd_soc_card *card = socdev->card; struct snd_soc_platform *platform = socdev->platform; struct snd_soc_codec_device *codec_dev = socdev->codec_dev; @@ -853,14 +853,14 @@ static int soc_remove(struct platform_device *pdev) if (codec_dev->remove) codec_dev->remove(pdev); - for (i = 0; i < machine->num_links; i++) { - struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai; + for (i = 0; i < card->num_links; i++) { + struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai; if (cpu_dai->remove) cpu_dai->remove(pdev, cpu_dai); } - if (machine->remove) - machine->remove(pdev); + if (card->remove) + card->remove(pdev); return 0; } @@ -1212,7 +1212,7 @@ EXPORT_SYMBOL_GPL(snd_soc_test_bits); int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid) { struct snd_soc_codec *codec = socdev->codec; - struct snd_soc_machine *machine = socdev->machine; + struct snd_soc_card *card = socdev->card; int ret = 0, i; mutex_lock(&codec->mutex); @@ -1231,11 +1231,11 @@ int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid) strncpy(codec->card->driver, codec->name, sizeof(codec->card->driver)); /* create the pcms */ - for (i = 0; i < machine->num_links; i++) { - ret = soc_new_pcm(socdev, &machine->dai_link[i], i); + for (i = 0; i < card->num_links; i++) { + ret = soc_new_pcm(socdev, &card->dai_link[i], i); if (ret < 0) { printk(KERN_ERR "asoc: can't create pcm %s\n", - machine->dai_link[i].stream_name); + card->dai_link[i].stream_name); mutex_unlock(&codec->mutex); return ret; } @@ -1258,26 +1258,26 @@ EXPORT_SYMBOL_GPL(snd_soc_new_pcms); int snd_soc_register_card(struct snd_soc_device *socdev) { struct snd_soc_codec *codec = socdev->codec; - struct snd_soc_machine *machine = socdev->machine; + struct snd_soc_card *card = socdev->card; int ret = 0, i, ac97 = 0, err = 0; - for (i = 0; i < machine->num_links; i++) { - if (socdev->machine->dai_link[i].init) { - err = socdev->machine->dai_link[i].init(codec); + for (i = 0; i < card->num_links; i++) { + if (card->dai_link[i].init) { + err = card->dai_link[i].init(codec); if (err < 0) { printk(KERN_ERR "asoc: failed to init %s\n", - socdev->machine->dai_link[i].stream_name); + card->dai_link[i].stream_name); continue; } } - if (socdev->machine->dai_link[i].codec_dai->type == + if (card->dai_link[i].codec_dai->type == SND_SOC_DAI_AC97_BUS) ac97 = 1; } snprintf(codec->card->shortname, sizeof(codec->card->shortname), - "%s", machine->name); + "%s", card->name); snprintf(codec->card->longname, sizeof(codec->card->longname), - "%s (%s)", machine->name, codec->name); + "%s (%s)", card->name, codec->name); ret = snd_card_register(codec->card); if (ret < 0) { diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 0fecbb44726b..61d7d85aa578 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1402,11 +1402,11 @@ int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev, enum snd_soc_bias_level level) { struct snd_soc_codec *codec = socdev->codec; - struct snd_soc_machine *machine = socdev->machine; + struct snd_soc_card *card = socdev->card; int ret = 0; - if (machine->set_bias_level) - ret = machine->set_bias_level(machine, level); + if (card->set_bias_level) + ret = card->set_bias_level(card, level); if (ret == 0 && codec->set_bias_level) ret = codec->set_bias_level(codec, level); -- cgit v1.2.3 From 4f904735c809e44c11f57cd4f82446aac1243e0e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 21 Nov 2008 15:08:23 +0000 Subject: ALSA: ASoC: Fix typo in snd_soc_card update documentation Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/soc/machine.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt index 4a9f51e2905c..bab7711ce963 100644 --- a/Documentation/sound/alsa/soc/machine.txt +++ b/Documentation/sound/alsa/soc/machine.txt @@ -9,7 +9,7 @@ the audio subsystem with the kernel as a platform device and is represented by the following struct:- /* SoC machine */ -struct snd_soc_card {_ +struct snd_soc_card { char *name; int (*probe)(struct platform_device *pdev); -- cgit v1.2.3 From f9f88fed3433139b58962011c81597b44fd48458 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 9 Nov 2008 18:38:51 +0200 Subject: mac80211_hwsim: Update documentation (AP mode enabled) AP mode is now enabled in mac80211, so there is no need to point users to an additional patch to enable the mode. In addition, add a pointer to more hwsim test cases in hostap.git. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- Documentation/networking/mac80211_hwsim/README | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/mac80211_hwsim/README b/Documentation/networking/mac80211_hwsim/README index 2ff8ccb8dc37..24ac91d56698 100644 --- a/Documentation/networking/mac80211_hwsim/README +++ b/Documentation/networking/mac80211_hwsim/README @@ -50,10 +50,6 @@ associates with the AP. hostapd and wpa_supplicant are used to take care of WPA2-PSK authentication. In addition, hostapd is also processing access point side of association. -Please note that the current Linux kernel does not enable AP mode, so a -simple patch is needed to enable AP mode selection: -http://johannes.sipsolutions.net/patches/kernel/all/LATEST/006-allow-ap-vlan-modes.patch - # Build mac80211_hwsim as part of kernel configuration @@ -65,3 +61,8 @@ hostapd hostapd.conf # Run wpa_supplicant (station) for wlan1 wpa_supplicant -Dwext -iwlan1 -c wpa_supplicant.conf + + +More test cases are available in hostap.git: +git://w1.fi/srv/git/hostap.git and mac80211_hwsim/tests subdirectory +(http://w1.fi/gitweb/gitweb.cgi?p=hostap.git;a=tree;f=mac80211_hwsim/tests) -- cgit v1.2.3 From e022c2f07ae52bfbd92faa273db0db2f34eb28e8 Mon Sep 17 00:00:00 2001 From: Krzysztof HaÅ‚asa Date: Thu, 14 Aug 2008 19:17:38 +0200 Subject: WAN: new synchronous PPP implementation for generic HDLC. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof HaÅ‚asa --- Documentation/networking/generic-hdlc.txt | 8 +- drivers/net/wan/Makefile | 2 +- drivers/net/wan/hdlc_ppp.c | 648 +++++++++++++++++++++++++++--- 3 files changed, 606 insertions(+), 52 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/generic-hdlc.txt b/Documentation/networking/generic-hdlc.txt index 31bc8b759b75..4eb3cc40b702 100644 --- a/Documentation/networking/generic-hdlc.txt +++ b/Documentation/networking/generic-hdlc.txt @@ -3,15 +3,15 @@ Krzysztof Halasa Generic HDLC layer currently supports: -1. Frame Relay (ANSI, CCITT, Cisco and no LMI). +1. Frame Relay (ANSI, CCITT, Cisco and no LMI) - Normal (routed) and Ethernet-bridged (Ethernet device emulation) interfaces can share a single PVC. - ARP support (no InARP support in the kernel - there is an experimental InARP user-space daemon available on: http://www.kernel.org/pub/linux/utils/net/hdlc/). -2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation. -3. Cisco HDLC. -4. PPP (uses syncppp.c). +2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation +3. Cisco HDLC +4. PPP 5. X.25 (uses X.25 routines). Generic HDLC is a protocol driver only - it needs a low-level driver diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 102549605d09..cec16818a130 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -14,7 +14,7 @@ obj-$(CONFIG_HDLC_RAW) += hdlc_raw.o obj-$(CONFIG_HDLC_RAW_ETH) += hdlc_raw_eth.o obj-$(CONFIG_HDLC_CISCO) += hdlc_cisco.o obj-$(CONFIG_HDLC_FR) += hdlc_fr.o -obj-$(CONFIG_HDLC_PPP) += hdlc_ppp.o syncppp.o +obj-$(CONFIG_HDLC_PPP) += hdlc_ppp.o obj-$(CONFIG_HDLC_X25) += hdlc_x25.o pc300-y := pc300_drv.o diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c index 4efe9e6d32d5..72fae217f1c4 100644 --- a/drivers/net/wan/hdlc_ppp.c +++ b/drivers/net/wan/hdlc_ppp.c @@ -2,7 +2,7 @@ * Generic HDLC support routines for Linux * Point-to-point protocol support * - * Copyright (C) 1999 - 2006 Krzysztof Halasa + * Copyright (C) 1999 - 2008 Krzysztof Halasa * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -18,87 +18,632 @@ #include #include #include -#include #include #include -#include +#include + +#define DEBUG_CP 0 /* also bytes# to dump */ +#define DEBUG_STATE 0 +#define DEBUG_HARD_HEADER 0 + +#define HDLC_ADDR_ALLSTATIONS 0xFF +#define HDLC_CTRL_UI 0x03 + +#define PID_LCP 0xC021 +#define PID_IP 0x0021 +#define PID_IPCP 0x8021 +#define PID_IPV6 0x0057 +#define PID_IPV6CP 0x8057 + +enum {IDX_LCP = 0, IDX_IPCP, IDX_IPV6CP, IDX_COUNT}; +enum {CP_CONF_REQ = 1, CP_CONF_ACK, CP_CONF_NAK, CP_CONF_REJ, CP_TERM_REQ, + CP_TERM_ACK, CP_CODE_REJ, LCP_PROTO_REJ, LCP_ECHO_REQ, LCP_ECHO_REPLY, + LCP_DISC_REQ, CP_CODES}; +#if DEBUG_CP +static const char *const code_names[CP_CODES] = { + "0", "ConfReq", "ConfAck", "ConfNak", "ConfRej", "TermReq", + "TermAck", "CodeRej", "ProtoRej", "EchoReq", "EchoReply", "Discard" +}; +static char debug_buffer[64 + 3 * DEBUG_CP]; +#endif + +enum {LCP_OPTION_MRU = 1, LCP_OPTION_ACCM, LCP_OPTION_MAGIC = 5}; + +struct hdlc_header { + u8 address; + u8 control; + __be16 protocol; +}; + +struct cp_header { + u8 code; + u8 id; + __be16 len; +}; + -struct ppp_state { - struct ppp_device pppdev; - struct ppp_device *syncppp_ptr; - int (*old_change_mtu)(struct net_device *dev, int new_mtu); +struct proto { + struct net_device *dev; + struct timer_list timer; + unsigned long timeout; + u16 pid; /* protocol ID */ + u8 state; + u8 cr_id; /* ID of last Configuration-Request */ + u8 restart_counter; }; +struct ppp { + struct proto protos[IDX_COUNT]; + spinlock_t lock; + unsigned long last_pong; + unsigned int req_timeout, cr_retries, term_retries; + unsigned int keepalive_interval, keepalive_timeout; + u8 seq; /* local sequence number for requests */ + u8 echo_id; /* ID of last Echo-Request (LCP) */ +}; + +enum {CLOSED = 0, STOPPED, STOPPING, REQ_SENT, ACK_RECV, ACK_SENT, OPENED, + STATES, STATE_MASK = 0xF}; +enum {START = 0, STOP, TO_GOOD, TO_BAD, RCR_GOOD, RCR_BAD, RCA, RCN, RTR, RTA, + RUC, RXJ_GOOD, RXJ_BAD, EVENTS}; +enum {INV = 0x10, IRC = 0x20, ZRC = 0x40, SCR = 0x80, SCA = 0x100, + SCN = 0x200, STR = 0x400, STA = 0x800, SCJ = 0x1000}; + +#if DEBUG_STATE +static const char *const state_names[STATES] = { + "Closed", "Stopped", "Stopping", "ReqSent", "AckRecv", "AckSent", + "Opened" +}; +static const char *const event_names[EVENTS] = { + "Start", "Stop", "TO+", "TO-", "RCR+", "RCR-", "RCA", "RCN", + "RTR", "RTA", "RUC", "RXJ+", "RXJ-" +}; +#endif + +static struct sk_buff_head tx_queue; /* used when holding the spin lock */ + static int ppp_ioctl(struct net_device *dev, struct ifreq *ifr); +static inline struct ppp* get_ppp(struct net_device *dev) +{ + return (struct ppp *)dev_to_hdlc(dev)->state; +} -static inline struct ppp_state* state(hdlc_device *hdlc) +static inline struct proto* get_proto(struct net_device *dev, u16 pid) { - return(struct ppp_state *)(hdlc->state); + struct ppp *ppp = get_ppp(dev); + + switch (pid) { + case PID_LCP: + return &ppp->protos[IDX_LCP]; + case PID_IPCP: + return &ppp->protos[IDX_IPCP]; + case PID_IPV6CP: + return &ppp->protos[IDX_IPV6CP]; + default: + return NULL; + } } +static inline const char* proto_name(u16 pid) +{ + switch (pid) { + case PID_LCP: + return "LCP"; + case PID_IPCP: + return "IPCP"; + case PID_IPV6CP: + return "IPV6CP"; + default: + return NULL; + } +} -static int ppp_open(struct net_device *dev) +static __be16 ppp_type_trans(struct sk_buff *skb, struct net_device *dev) { - hdlc_device *hdlc = dev_to_hdlc(dev); - int (*old_ioctl)(struct net_device *, struct ifreq *, int); - int result; + struct hdlc_header *data = (struct hdlc_header*)skb->data; + + if (skb->len < sizeof(struct hdlc_header)) + return htons(ETH_P_HDLC); + if (data->address != HDLC_ADDR_ALLSTATIONS || + data->control != HDLC_CTRL_UI) + return htons(ETH_P_HDLC); + + switch (data->protocol) { + case __constant_htons(PID_IP): + skb_pull(skb, sizeof(struct hdlc_header)); + return htons(ETH_P_IP); - dev->ml_priv = &state(hdlc)->syncppp_ptr; - state(hdlc)->syncppp_ptr = &state(hdlc)->pppdev; - state(hdlc)->pppdev.dev = dev; + case __constant_htons(PID_IPV6): + skb_pull(skb, sizeof(struct hdlc_header)); + return htons(ETH_P_IPV6); - old_ioctl = dev->do_ioctl; - state(hdlc)->old_change_mtu = dev->change_mtu; - sppp_attach(&state(hdlc)->pppdev); - /* sppp_attach nukes them. We don't need syncppp's ioctl */ - dev->do_ioctl = old_ioctl; - state(hdlc)->pppdev.sppp.pp_flags &= ~PP_CISCO; - dev->type = ARPHRD_PPP; - result = sppp_open(dev); - if (result) { - sppp_detach(dev); - return result; + default: + return htons(ETH_P_HDLC); } +} - return 0; + +static int ppp_hard_header(struct sk_buff *skb, struct net_device *dev, + u16 type, const void *daddr, const void *saddr, + unsigned int len) +{ + struct hdlc_header *data; +#if DEBUG_HARD_HEADER + printk(KERN_DEBUG "%s: ppp_hard_header() called\n", dev->name); +#endif + + skb_push(skb, sizeof(struct hdlc_header)); + data = (struct hdlc_header*)skb->data; + + data->address = HDLC_ADDR_ALLSTATIONS; + data->control = HDLC_CTRL_UI; + switch (type) { + case ETH_P_IP: + data->protocol = htons(PID_IP); + break; + case ETH_P_IPV6: + data->protocol = htons(PID_IPV6); + break; + case PID_LCP: + case PID_IPCP: + case PID_IPV6CP: + data->protocol = htons(type); + break; + default: /* unknown protocol */ + data->protocol = 0; + } + return sizeof(struct hdlc_header); } +static void ppp_tx_flush(void) +{ + struct sk_buff *skb; + while ((skb = skb_dequeue(&tx_queue)) != NULL) + dev_queue_xmit(skb); +} -static void ppp_close(struct net_device *dev) +static void ppp_tx_cp(struct net_device *dev, u16 pid, u8 code, + u8 id, unsigned int len, const void *data) { - hdlc_device *hdlc = dev_to_hdlc(dev); + struct sk_buff *skb; + struct cp_header *cp; + unsigned int magic_len = 0; + static u32 magic; + +#if DEBUG_CP + int i; + char *ptr; +#endif + + if (pid == PID_LCP && (code == LCP_ECHO_REQ || code == LCP_ECHO_REPLY)) + magic_len = sizeof(magic); + + skb = dev_alloc_skb(sizeof(struct hdlc_header) + + sizeof(struct cp_header) + magic_len + len); + if (!skb) { + printk(KERN_WARNING "%s: out of memory in ppp_tx_cp()\n", + dev->name); + return; + } + skb_reserve(skb, sizeof(struct hdlc_header)); + + cp = (struct cp_header *)skb_put(skb, sizeof(struct cp_header)); + cp->code = code; + cp->id = id; + cp->len = htons(sizeof(struct cp_header) + magic_len + len); + + if (magic_len) + memcpy(skb_put(skb, magic_len), &magic, magic_len); + if (len) + memcpy(skb_put(skb, len), data, len); + +#if DEBUG_CP + BUG_ON(code >= CP_CODES); + ptr = debug_buffer; + *ptr = '\x0'; + for (i = 0; i < min_t(unsigned int, magic_len + len, DEBUG_CP); i++) { + sprintf(ptr, " %02X", skb->data[sizeof(struct cp_header) + i]); + ptr += strlen(ptr); + } + printk(KERN_DEBUG "%s: TX %s [%s id 0x%X]%s\n", dev->name, + proto_name(pid), code_names[code], id, debug_buffer); +#endif - sppp_close(dev); - sppp_detach(dev); + ppp_hard_header(skb, dev, pid, NULL, NULL, 0); - dev->change_mtu = state(hdlc)->old_change_mtu; - dev->mtu = HDLC_MAX_MTU; - dev->hard_header_len = 16; + skb->priority = TC_PRIO_CONTROL; + skb->dev = dev; + skb_reset_network_header(skb); + skb_queue_tail(&tx_queue, skb); } +/* State transition table (compare STD-51) + Events Actions + TO+ = Timeout with counter > 0 irc = Initialize-Restart-Count + TO- = Timeout with counter expired zrc = Zero-Restart-Count + + RCR+ = Receive-Configure-Request (Good) scr = Send-Configure-Request + RCR- = Receive-Configure-Request (Bad) + RCA = Receive-Configure-Ack sca = Send-Configure-Ack + RCN = Receive-Configure-Nak/Rej scn = Send-Configure-Nak/Rej + + RTR = Receive-Terminate-Request str = Send-Terminate-Request + RTA = Receive-Terminate-Ack sta = Send-Terminate-Ack + + RUC = Receive-Unknown-Code scj = Send-Code-Reject + RXJ+ = Receive-Code-Reject (permitted) + or Receive-Protocol-Reject + RXJ- = Receive-Code-Reject (catastrophic) + or Receive-Protocol-Reject +*/ +static int cp_table[EVENTS][STATES] = { + /* CLOSED STOPPED STOPPING REQ_SENT ACK_RECV ACK_SENT OPENED + 0 1 2 3 4 5 6 */ + {IRC|SCR|3, INV , INV , INV , INV , INV , INV }, /* START */ + { INV , 0 , 0 , 0 , 0 , 0 , 0 }, /* STOP */ + { INV , INV ,STR|2, SCR|3 ,SCR|3, SCR|5 , INV }, /* TO+ */ + { INV , INV , 1 , 1 , 1 , 1 , INV }, /* TO- */ + { STA|0 ,IRC|SCR|SCA|5, 2 , SCA|5 ,SCA|6, SCA|5 ,SCR|SCA|5}, /* RCR+ */ + { STA|0 ,IRC|SCR|SCN|3, 2 , SCN|3 ,SCN|4, SCN|3 ,SCR|SCN|3}, /* RCR- */ + { STA|0 , STA|1 , 2 , IRC|4 ,SCR|3, 6 , SCR|3 }, /* RCA */ + { STA|0 , STA|1 , 2 ,IRC|SCR|3,SCR|3,IRC|SCR|5, SCR|3 }, /* RCN */ + { STA|0 , STA|1 ,STA|2, STA|3 ,STA|3, STA|3 ,ZRC|STA|2}, /* RTR */ + { 0 , 1 , 1 , 3 , 3 , 5 , SCR|3 }, /* RTA */ + { SCJ|0 , SCJ|1 ,SCJ|2, SCJ|3 ,SCJ|4, SCJ|5 , SCJ|6 }, /* RUC */ + { 0 , 1 , 2 , 3 , 3 , 5 , 6 }, /* RXJ+ */ + { 0 , 1 , 1 , 1 , 1 , 1 ,IRC|STR|2}, /* RXJ- */ +}; + -static __be16 ppp_type_trans(struct sk_buff *skb, struct net_device *dev) +/* SCA: RCR+ must supply id, len and data + SCN: RCR- must supply code, id, len and data + STA: RTR must supply id + SCJ: RUC must supply CP packet len and data */ +static void ppp_cp_event(struct net_device *dev, u16 pid, u16 event, u8 code, + u8 id, unsigned int len, void *data) { - return __constant_htons(ETH_P_WAN_PPP); + int old_state, action; + struct ppp *ppp = get_ppp(dev); + struct proto *proto = get_proto(dev, pid); + + old_state = proto->state; + BUG_ON(old_state >= STATES); + BUG_ON(event >= EVENTS); + +#if DEBUG_STATE + printk(KERN_DEBUG "%s: %s ppp_cp_event(%s) %s ...\n", dev->name, + proto_name(pid), event_names[event], state_names[proto->state]); +#endif + + action = cp_table[event][old_state]; + + proto->state = action & STATE_MASK; + if (action & (SCR | STR)) /* set Configure-Req/Terminate-Req timer */ + mod_timer(&proto->timer, proto->timeout = + jiffies + ppp->req_timeout * HZ); + if (action & ZRC) + proto->restart_counter = 0; + if (action & IRC) + proto->restart_counter = (proto->state == STOPPING) ? + ppp->term_retries : ppp->cr_retries; + + if (action & SCR) /* send Configure-Request */ + ppp_tx_cp(dev, pid, CP_CONF_REQ, proto->cr_id = ++ppp->seq, + 0, NULL); + if (action & SCA) /* send Configure-Ack */ + ppp_tx_cp(dev, pid, CP_CONF_ACK, id, len, data); + if (action & SCN) /* send Configure-Nak/Reject */ + ppp_tx_cp(dev, pid, code, id, len, data); + if (action & STR) /* send Terminate-Request */ + ppp_tx_cp(dev, pid, CP_TERM_REQ, ++ppp->seq, 0, NULL); + if (action & STA) /* send Terminate-Ack */ + ppp_tx_cp(dev, pid, CP_TERM_ACK, id, 0, NULL); + if (action & SCJ) /* send Code-Reject */ + ppp_tx_cp(dev, pid, CP_CODE_REJ, ++ppp->seq, len, data); + + if (old_state != OPENED && proto->state == OPENED) { + printk(KERN_INFO "%s: %s up\n", dev->name, proto_name(pid)); + if (pid == PID_LCP) { + netif_dormant_off(dev); + ppp_cp_event(dev, PID_IPCP, START, 0, 0, 0, NULL); + ppp_cp_event(dev, PID_IPV6CP, START, 0, 0, 0, NULL); + ppp->last_pong = jiffies; + mod_timer(&proto->timer, proto->timeout = + jiffies + ppp->keepalive_interval * HZ); + } + } + if (old_state == OPENED && proto->state != OPENED) { + printk(KERN_INFO "%s: %s down\n", dev->name, proto_name(pid)); + if (pid == PID_LCP) { + netif_dormant_on(dev); + ppp_cp_event(dev, PID_IPCP, STOP, 0, 0, 0, NULL); + ppp_cp_event(dev, PID_IPV6CP, STOP, 0, 0, 0, NULL); + } + } + if (old_state != CLOSED && proto->state == CLOSED) + del_timer(&proto->timer); + +#if DEBUG_STATE + printk(KERN_DEBUG "%s: %s ppp_cp_event(%s) ... %s\n", dev->name, + proto_name(pid), event_names[event], state_names[proto->state]); +#endif } +static void ppp_cp_parse_cr(struct net_device *dev, u16 pid, u8 id, + unsigned int len, u8 *data) +{ + static u8 const valid_accm[6] = { LCP_OPTION_ACCM, 6, 0, 0, 0, 0 }; + u8 *opt, *out; + unsigned int nak_len = 0, rej_len = 0; + + if (!(out = kmalloc(len, GFP_ATOMIC))) { + dev->stats.rx_dropped++; + return; /* out of memory, ignore CR packet */ + } + + for (opt = data; len; len -= opt[1], opt += opt[1]) { + if (len < 2 || len < opt[1]) { + dev->stats.rx_errors++; + return; /* bad packet, drop silently */ + } + + if (pid == PID_LCP) + switch (opt[0]) { + case LCP_OPTION_MRU: + continue; /* MRU always OK and > 1500 bytes? */ + + case LCP_OPTION_ACCM: /* async control character map */ + if (!memcmp(opt, valid_accm, + sizeof(valid_accm))) + continue; + if (!rej_len) { /* NAK it */ + memcpy(out + nak_len, valid_accm, + sizeof(valid_accm)); + nak_len += sizeof(valid_accm); + continue; + } + break; + case LCP_OPTION_MAGIC: + if (opt[1] != 6 || (!opt[2] && !opt[3] && + !opt[4] && !opt[5])) + break; /* reject invalid magic number */ + continue; + } + /* reject this option */ + memcpy(out + rej_len, opt, opt[1]); + rej_len += opt[1]; + } + + if (rej_len) + ppp_cp_event(dev, pid, RCR_BAD, CP_CONF_REJ, id, rej_len, out); + else if (nak_len) + ppp_cp_event(dev, pid, RCR_BAD, CP_CONF_NAK, id, nak_len, out); + else + ppp_cp_event(dev, pid, RCR_GOOD, CP_CONF_ACK, id, len, data); + + kfree(out); +} + +static int ppp_rx(struct sk_buff *skb) +{ + struct hdlc_header *hdr = (struct hdlc_header*)skb->data; + struct net_device *dev = skb->dev; + struct ppp *ppp = get_ppp(dev); + struct proto *proto; + struct cp_header *cp; + unsigned long flags; + unsigned int len; + u16 pid; +#if DEBUG_CP + int i; + char *ptr; +#endif + + spin_lock_irqsave(&ppp->lock, flags); + /* Check HDLC header */ + if (skb->len < sizeof(struct hdlc_header)) + goto rx_error; + cp = (struct cp_header*)skb_pull(skb, sizeof(struct hdlc_header)); + if (hdr->address != HDLC_ADDR_ALLSTATIONS || + hdr->control != HDLC_CTRL_UI) + goto rx_error; + + pid = ntohs(hdr->protocol); + proto = get_proto(dev, pid); + if (!proto) { + if (ppp->protos[IDX_LCP].state == OPENED) + ppp_tx_cp(dev, PID_LCP, LCP_PROTO_REJ, + ++ppp->seq, skb->len + 2, &hdr->protocol); + goto rx_error; + } + + len = ntohs(cp->len); + if (len < sizeof(struct cp_header) /* no complete CP header? */ || + skb->len < len /* truncated packet? */) + goto rx_error; + skb_pull(skb, sizeof(struct cp_header)); + len -= sizeof(struct cp_header); + + /* HDLC and CP headers stripped from skb */ +#if DEBUG_CP + if (cp->code < CP_CODES) + sprintf(debug_buffer, "[%s id 0x%X]", code_names[cp->code], + cp->id); + else + sprintf(debug_buffer, "[code %u id 0x%X]", cp->code, cp->id); + ptr = debug_buffer + strlen(debug_buffer); + for (i = 0; i < min_t(unsigned int, len, DEBUG_CP); i++) { + sprintf(ptr, " %02X", skb->data[i]); + ptr += strlen(ptr); + } + printk(KERN_DEBUG "%s: RX %s %s\n", dev->name, proto_name(pid), + debug_buffer); +#endif + + /* LCP only */ + if (pid == PID_LCP) + switch (cp->code) { + case LCP_PROTO_REJ: + pid = ntohs(*(__be16*)skb->data); + if (pid == PID_LCP || pid == PID_IPCP || + pid == PID_IPV6CP) + ppp_cp_event(dev, pid, RXJ_BAD, 0, 0, + 0, NULL); + goto out; + + case LCP_ECHO_REQ: /* send Echo-Reply */ + if (len >= 4 && proto->state == OPENED) + ppp_tx_cp(dev, PID_LCP, LCP_ECHO_REPLY, + cp->id, len - 4, skb->data + 4); + goto out; + + case LCP_ECHO_REPLY: + if (cp->id == ppp->echo_id) + ppp->last_pong = jiffies; + goto out; + + case LCP_DISC_REQ: /* discard */ + goto out; + } + + /* LCP, IPCP and IPV6CP */ + switch (cp->code) { + case CP_CONF_REQ: + ppp_cp_parse_cr(dev, pid, cp->id, len, skb->data); + goto out; + + case CP_CONF_ACK: + if (cp->id == proto->cr_id) + ppp_cp_event(dev, pid, RCA, 0, 0, 0, NULL); + goto out; + + case CP_CONF_REJ: + case CP_CONF_NAK: + if (cp->id == proto->cr_id) + ppp_cp_event(dev, pid, RCN, 0, 0, 0, NULL); + goto out; + + case CP_TERM_REQ: + ppp_cp_event(dev, pid, RTR, 0, cp->id, 0, NULL); + goto out; + + case CP_TERM_ACK: + ppp_cp_event(dev, pid, RTA, 0, 0, 0, NULL); + goto out; + + case CP_CODE_REJ: + ppp_cp_event(dev, pid, RXJ_BAD, 0, 0, 0, NULL); + goto out; + + default: + len += sizeof(struct cp_header); + if (len > dev->mtu) + len = dev->mtu; + ppp_cp_event(dev, pid, RUC, 0, 0, len, cp); + goto out; + } + goto out; + +rx_error: + dev->stats.rx_errors++; +out: + spin_unlock_irqrestore(&ppp->lock, flags); + dev_kfree_skb_any(skb); + ppp_tx_flush(); + return NET_RX_DROP; +} + + +static void ppp_timer(unsigned long arg) +{ + struct proto *proto = (struct proto *)arg; + struct ppp *ppp = get_ppp(proto->dev); + unsigned long flags; + + spin_lock_irqsave(&ppp->lock, flags); + switch (proto->state) { + case STOPPING: + case REQ_SENT: + case ACK_RECV: + case ACK_SENT: + if (proto->restart_counter) { + ppp_cp_event(proto->dev, proto->pid, TO_GOOD, 0, 0, + 0, NULL); + proto->restart_counter--; + } else + ppp_cp_event(proto->dev, proto->pid, TO_BAD, 0, 0, + 0, NULL); + break; + + case OPENED: + if (proto->pid != PID_LCP) + break; + if (time_after(jiffies, ppp->last_pong + + ppp->keepalive_timeout * HZ)) { + printk(KERN_INFO "%s: Link down\n", proto->dev->name); + ppp_cp_event(proto->dev, PID_LCP, STOP, 0, 0, 0, NULL); + ppp_cp_event(proto->dev, PID_LCP, START, 0, 0, 0, NULL); + } else { /* send keep-alive packet */ + ppp->echo_id = ++ppp->seq; + ppp_tx_cp(proto->dev, PID_LCP, LCP_ECHO_REQ, + ppp->echo_id, 0, NULL); + proto->timer.expires = jiffies + + ppp->keepalive_interval * HZ; + add_timer(&proto->timer); + } + break; + } + spin_unlock_irqrestore(&ppp->lock, flags); + ppp_tx_flush(); +} + + +static void ppp_start(struct net_device *dev) +{ + struct ppp *ppp = get_ppp(dev); + int i; + + for (i = 0; i < IDX_COUNT; i++) { + struct proto *proto = &ppp->protos[i]; + proto->dev = dev; + init_timer(&proto->timer); + proto->timer.function = ppp_timer; + proto->timer.data = (unsigned long)proto; + proto->state = CLOSED; + } + ppp->protos[IDX_LCP].pid = PID_LCP; + ppp->protos[IDX_IPCP].pid = PID_IPCP; + ppp->protos[IDX_IPV6CP].pid = PID_IPV6CP; + + ppp_cp_event(dev, PID_LCP, START, 0, 0, 0, NULL); +} + +static void ppp_stop(struct net_device *dev) +{ + ppp_cp_event(dev, PID_LCP, STOP, 0, 0, 0, NULL); +} static struct hdlc_proto proto = { - .open = ppp_open, - .close = ppp_close, + .start = ppp_start, + .stop = ppp_stop, .type_trans = ppp_type_trans, .ioctl = ppp_ioctl, + .netif_rx = ppp_rx, .module = THIS_MODULE, }; +static const struct header_ops ppp_header_ops = { + .create = ppp_hard_header, +}; static int ppp_ioctl(struct net_device *dev, struct ifreq *ifr) { hdlc_device *hdlc = dev_to_hdlc(dev); + struct ppp *ppp; int result; switch (ifr->ifr_settings.type) { @@ -109,25 +654,35 @@ static int ppp_ioctl(struct net_device *dev, struct ifreq *ifr) return 0; /* return protocol only, no settable parameters */ case IF_PROTO_PPP: - if(!capable(CAP_NET_ADMIN)) + if (!capable(CAP_NET_ADMIN)) return -EPERM; - if(dev->flags & IFF_UP) + if (dev->flags & IFF_UP) return -EBUSY; /* no settable parameters */ - result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); + result = hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); if (result) return result; - result = attach_hdlc_protocol(dev, &proto, - sizeof(struct ppp_state)); + result = attach_hdlc_protocol(dev, &proto, sizeof(struct ppp)); if (result) return result; + + ppp = get_ppp(dev); + spin_lock_init(&ppp->lock); + ppp->req_timeout = 2; + ppp->cr_retries = 10; + ppp->term_retries = 2; + ppp->keepalive_interval = 10; + ppp->keepalive_timeout = 60; + dev->hard_start_xmit = hdlc->xmit; + dev->hard_header_len = sizeof(struct hdlc_header); + dev->header_ops = &ppp_header_ops; dev->type = ARPHRD_PPP; - netif_dormant_off(dev); + netif_dormant_on(dev); return 0; } @@ -137,12 +692,11 @@ static int ppp_ioctl(struct net_device *dev, struct ifreq *ifr) static int __init mod_init(void) { + skb_queue_head_init(&tx_queue); register_hdlc_protocol(&proto); return 0; } - - static void __exit mod_exit(void) { unregister_hdlc_protocol(&proto); -- cgit v1.2.3 From 72364706c3b7c09a658e356218a918c5f92dcad0 Mon Sep 17 00:00:00 2001 From: Krzysztof HaÅ‚asa Date: Thu, 14 Aug 2008 19:18:17 +0200 Subject: WAN: syncppp.c is no longer used by any kernel code. Remove it. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof HaÅ‚asa --- Documentation/DocBook/Makefile | 2 +- Documentation/DocBook/networking.tmpl | 3 - Documentation/DocBook/wanbook.tmpl | 99 --- drivers/net/wan/syncppp.c | 1476 --------------------------------- include/net/syncppp.h | 102 --- 5 files changed, 1 insertion(+), 1681 deletions(-) delete mode 100644 Documentation/DocBook/wanbook.tmpl delete mode 100644 drivers/net/wan/syncppp.c delete mode 100644 include/net/syncppp.h (limited to 'Documentation') diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 9b1f6ca100d1..0a08126d3094 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -6,7 +6,7 @@ # To add a new book the only step required is to add the book to the # list of DOCBOOKS. -DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml \ +DOCBOOKS := z8530book.xml mcabook.xml \ kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ procfs-guide.xml writing_usb_driver.xml networking.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ diff --git a/Documentation/DocBook/networking.tmpl b/Documentation/DocBook/networking.tmpl index f24f9e85e4ae..627707a3cb9d 100644 --- a/Documentation/DocBook/networking.tmpl +++ b/Documentation/DocBook/networking.tmpl @@ -98,9 +98,6 @@ X!Enet/core/wireless.c --> - Synchronous PPP -!Edrivers/net/wan/syncppp.c - diff --git a/Documentation/DocBook/wanbook.tmpl b/Documentation/DocBook/wanbook.tmpl deleted file mode 100644 index 8c93db122f04..000000000000 --- a/Documentation/DocBook/wanbook.tmpl +++ /dev/null @@ -1,99 +0,0 @@ - - - - - - Synchronous PPP and Cisco HDLC Programming Guide - - - - Alan - Cox - -
- alan@lxorguk.ukuu.org.uk -
- - - - - - 2000 - Alan Cox - - - - - This documentation is free software; you can redistribute - it and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2 of the License, or (at your option) any later - version. - - - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - - - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - MA 02111-1307 USA - - - - For more details see the file COPYING in the source - distribution of Linux. - - - - - - - - Introduction - - The syncppp drivers in Linux provide a fairly complete - implementation of Cisco HDLC and a minimal implementation of - PPP. The longer term goal is to switch the PPP layer to the - generic PPP interface that is new in Linux 2.3.x. The API should - remain unchanged when this is done, but support will then be - available for IPX, compression and other PPP features - - - - Known Bugs And Assumptions - - - PPP is minimal - - - The current PPP implementation is very basic, although sufficient - for most wan usages. - - - - Cisco HDLC Quirks - - - Currently we do not end all packets with the correct Cisco multicast - or unicast flags. Nothing appears to mind too much but this should - be corrected. - - - - - - - - - Public Functions Provided -!Edrivers/net/wan/syncppp.c - - - diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c deleted file mode 100644 index 58ae8a2223af..000000000000 --- a/drivers/net/wan/syncppp.c +++ /dev/null @@ -1,1476 +0,0 @@ -/* - * NET3: A (fairly minimal) implementation of synchronous PPP for Linux - * as well as a CISCO HDLC implementation. See the copyright - * message below for the original source. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the license, or (at your option) any later version. - * - * Note however. This code is also used in a different form by FreeBSD. - * Therefore when making any non OS specific change please consider - * contributing it back to the original author under the terms - * below in addition. - * -- Alan - * - * Port for Linux-2.1 by Jan "Yenya" Kasprzak - */ - -/* - * Synchronous PPP/Cisco link level subroutines. - * Keepalive protocol implemented in both Cisco and PPP modes. - * - * Copyright (C) 1994 Cronyx Ltd. - * Author: Serge Vakulenko, - * - * This software is distributed with NO WARRANTIES, not even the implied - * warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Authors grant any other persons or organisations permission to use - * or modify this software as long as this message is kept with the software, - * all derivative works or modified versions. - * - * Version 1.9, Wed Oct 4 18:58:15 MSK 1995 - * - * $Id: syncppp.c,v 1.18 2000/04/11 05:25:31 asj Exp $ - */ -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#define MAXALIVECNT 6 /* max. alive packets */ - -#define PPP_ALLSTATIONS 0xff /* All-Stations broadcast address */ -#define PPP_UI 0x03 /* Unnumbered Information */ -#define PPP_IP 0x0021 /* Internet Protocol */ -#define PPP_ISO 0x0023 /* ISO OSI Protocol */ -#define PPP_XNS 0x0025 /* Xerox NS Protocol */ -#define PPP_IPX 0x002b /* Novell IPX Protocol */ -#define PPP_LCP 0xc021 /* Link Control Protocol */ -#define PPP_IPCP 0x8021 /* Internet Protocol Control Protocol */ - -#define LCP_CONF_REQ 1 /* PPP LCP configure request */ -#define LCP_CONF_ACK 2 /* PPP LCP configure acknowledge */ -#define LCP_CONF_NAK 3 /* PPP LCP configure negative ack */ -#define LCP_CONF_REJ 4 /* PPP LCP configure reject */ -#define LCP_TERM_REQ 5 /* PPP LCP terminate request */ -#define LCP_TERM_ACK 6 /* PPP LCP terminate acknowledge */ -#define LCP_CODE_REJ 7 /* PPP LCP code reject */ -#define LCP_PROTO_REJ 8 /* PPP LCP protocol reject */ -#define LCP_ECHO_REQ 9 /* PPP LCP echo request */ -#define LCP_ECHO_REPLY 10 /* PPP LCP echo reply */ -#define LCP_DISC_REQ 11 /* PPP LCP discard request */ - -#define LCP_OPT_MRU 1 /* maximum receive unit */ -#define LCP_OPT_ASYNC_MAP 2 /* async control character map */ -#define LCP_OPT_AUTH_PROTO 3 /* authentication protocol */ -#define LCP_OPT_QUAL_PROTO 4 /* quality protocol */ -#define LCP_OPT_MAGIC 5 /* magic number */ -#define LCP_OPT_RESERVED 6 /* reserved */ -#define LCP_OPT_PROTO_COMP 7 /* protocol field compression */ -#define LCP_OPT_ADDR_COMP 8 /* address/control field compression */ - -#define IPCP_CONF_REQ LCP_CONF_REQ /* PPP IPCP configure request */ -#define IPCP_CONF_ACK LCP_CONF_ACK /* PPP IPCP configure acknowledge */ -#define IPCP_CONF_NAK LCP_CONF_NAK /* PPP IPCP configure negative ack */ -#define IPCP_CONF_REJ LCP_CONF_REJ /* PPP IPCP configure reject */ -#define IPCP_TERM_REQ LCP_TERM_REQ /* PPP IPCP terminate request */ -#define IPCP_TERM_ACK LCP_TERM_ACK /* PPP IPCP terminate acknowledge */ -#define IPCP_CODE_REJ LCP_CODE_REJ /* PPP IPCP code reject */ - -#define CISCO_MULTICAST 0x8f /* Cisco multicast address */ -#define CISCO_UNICAST 0x0f /* Cisco unicast address */ -#define CISCO_KEEPALIVE 0x8035 /* Cisco keepalive protocol */ -#define CISCO_ADDR_REQ 0 /* Cisco address request */ -#define CISCO_ADDR_REPLY 1 /* Cisco address reply */ -#define CISCO_KEEPALIVE_REQ 2 /* Cisco keepalive request */ - -struct ppp_header { - u8 address; - u8 control; - __be16 protocol; -}; -#define PPP_HEADER_LEN sizeof (struct ppp_header) - -struct lcp_header { - u8 type; - u8 ident; - __be16 len; -}; -#define LCP_HEADER_LEN sizeof (struct lcp_header) - -struct cisco_packet { - __be32 type; - __be32 par1; - __be32 par2; - __be16 rel; - __be16 time0; - __be16 time1; -}; -#define CISCO_PACKET_LEN 18 -#define CISCO_BIG_PACKET_LEN 20 - -static struct sppp *spppq; -static struct timer_list sppp_keepalive_timer; -static DEFINE_SPINLOCK(spppq_lock); - -/* global xmit queue for sending packets while spinlock is held */ -static struct sk_buff_head tx_queue; - -static void sppp_keepalive (unsigned long dummy); -static void sppp_cp_send (struct sppp *sp, u16 proto, u8 type, - u8 ident, u16 len, void *data); -static void sppp_cisco_send (struct sppp *sp, int type, u32 par1, u32 par2); -static void sppp_lcp_input (struct sppp *sp, struct sk_buff *m); -static void sppp_cisco_input (struct sppp *sp, struct sk_buff *m); -static void sppp_ipcp_input (struct sppp *sp, struct sk_buff *m); -static void sppp_lcp_open (struct sppp *sp); -static void sppp_ipcp_open (struct sppp *sp); -static int sppp_lcp_conf_parse_options (struct sppp *sp, struct lcp_header *h, - int len, u32 *magic); -static void sppp_cp_timeout (unsigned long arg); -static char *sppp_lcp_type_name (u8 type); -static char *sppp_ipcp_type_name (u8 type); -static void sppp_print_bytes (u8 *p, u16 len); - -static int debug; - -/* Flush global outgoing packet queue to dev_queue_xmit(). - * - * dev_queue_xmit() must be called with interrupts enabled - * which means it can't be called with spinlocks held. - * If a packet needs to be sent while a spinlock is held, - * then put the packet into tx_queue, and call sppp_flush_xmit() - * after spinlock is released. - */ -static void sppp_flush_xmit(void) -{ - struct sk_buff *skb; - while ((skb = skb_dequeue(&tx_queue)) != NULL) - dev_queue_xmit(skb); -} - -/* - * Interface down stub - */ - -static void if_down(struct net_device *dev) -{ - struct sppp *sp = (struct sppp *)sppp_of(dev); - - sp->pp_link_state=SPPP_LINK_DOWN; -} - -/* - * Timeout routine activations. - */ - -static void sppp_set_timeout(struct sppp *p,int s) -{ - if (! (p->pp_flags & PP_TIMO)) - { - init_timer(&p->pp_timer); - p->pp_timer.function=sppp_cp_timeout; - p->pp_timer.expires=jiffies+s*HZ; - p->pp_timer.data=(unsigned long)p; - p->pp_flags |= PP_TIMO; - add_timer(&p->pp_timer); - } -} - -static void sppp_clear_timeout(struct sppp *p) -{ - if (p->pp_flags & PP_TIMO) - { - del_timer(&p->pp_timer); - p->pp_flags &= ~PP_TIMO; - } -} - -/** - * sppp_input - receive and process a WAN PPP frame - * @skb: The buffer to process - * @dev: The device it arrived on - * - * This can be called directly by cards that do not have - * timing constraints but is normally called from the network layer - * after interrupt servicing to process frames queued via netif_rx(). - * - * We process the options in the card. If the frame is destined for - * the protocol stacks then it requeues the frame for the upper level - * protocol. If it is a control from it is processed and discarded - * here. - */ - -static void sppp_input (struct net_device *dev, struct sk_buff *skb) -{ - struct ppp_header *h; - struct sppp *sp = (struct sppp *)sppp_of(dev); - unsigned long flags; - - skb->dev=dev; - skb_reset_mac_header(skb); - - if (!pskb_may_pull(skb, PPP_HEADER_LEN)) { - /* Too small packet, drop it. */ - if (sp->pp_flags & PP_DEBUG) - printk (KERN_DEBUG "%s: input packet is too small, %d bytes\n", - dev->name, skb->len); - kfree_skb(skb); - return; - } - - /* Get PPP header. */ - h = (struct ppp_header *)skb->data; - skb_pull(skb,sizeof(struct ppp_header)); - - spin_lock_irqsave(&sp->lock, flags); - - switch (h->address) { - default: /* Invalid PPP packet. */ - goto invalid; - case PPP_ALLSTATIONS: - if (h->control != PPP_UI) - goto invalid; - if (sp->pp_flags & PP_CISCO) { - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: PPP packet in Cisco mode <0x%x 0x%x 0x%x>\n", - dev->name, - h->address, h->control, ntohs (h->protocol)); - goto drop; - } - switch (ntohs (h->protocol)) { - default: - if (sp->lcp.state == LCP_STATE_OPENED) - sppp_cp_send (sp, PPP_LCP, LCP_PROTO_REJ, - ++sp->pp_seq, skb->len + 2, - &h->protocol); - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: invalid input protocol <0x%x 0x%x 0x%x>\n", - dev->name, - h->address, h->control, ntohs (h->protocol)); - goto drop; - case PPP_LCP: - sppp_lcp_input (sp, skb); - goto drop; - case PPP_IPCP: - if (sp->lcp.state == LCP_STATE_OPENED) - sppp_ipcp_input (sp, skb); - else - printk(KERN_DEBUG "IPCP when still waiting LCP finish.\n"); - goto drop; - case PPP_IP: - if (sp->ipcp.state == IPCP_STATE_OPENED) { - if(sp->pp_flags&PP_DEBUG) - printk(KERN_DEBUG "Yow an IP frame.\n"); - skb->protocol=htons(ETH_P_IP); - netif_rx(skb); - goto done; - } - break; -#ifdef IPX - case PPP_IPX: - /* IPX IPXCP not implemented yet */ - if (sp->lcp.state == LCP_STATE_OPENED) { - skb->protocol=htons(ETH_P_IPX); - netif_rx(skb); - goto done; - } - break; -#endif - } - break; - case CISCO_MULTICAST: - case CISCO_UNICAST: - /* Don't check the control field here (RFC 1547). */ - if (! (sp->pp_flags & PP_CISCO)) { - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: Cisco packet in PPP mode <0x%x 0x%x 0x%x>\n", - dev->name, - h->address, h->control, ntohs (h->protocol)); - goto drop; - } - switch (ntohs (h->protocol)) { - default: - goto invalid; - case CISCO_KEEPALIVE: - sppp_cisco_input (sp, skb); - goto drop; -#ifdef CONFIG_INET - case ETH_P_IP: - skb->protocol=htons(ETH_P_IP); - netif_rx(skb); - goto done; -#endif -#ifdef CONFIG_IPX - case ETH_P_IPX: - skb->protocol=htons(ETH_P_IPX); - netif_rx(skb); - goto done; -#endif - } - break; - } - goto drop; - -invalid: - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: invalid input packet <0x%x 0x%x 0x%x>\n", - dev->name, h->address, h->control, ntohs (h->protocol)); -drop: - kfree_skb(skb); -done: - spin_unlock_irqrestore(&sp->lock, flags); - sppp_flush_xmit(); - return; -} - -/* - * Handle transmit packets. - */ - -static int sppp_hard_header(struct sk_buff *skb, - struct net_device *dev, __u16 type, - const void *daddr, const void *saddr, - unsigned int len) -{ - struct sppp *sp = (struct sppp *)sppp_of(dev); - struct ppp_header *h; - skb_push(skb,sizeof(struct ppp_header)); - h=(struct ppp_header *)skb->data; - if(sp->pp_flags&PP_CISCO) - { - h->address = CISCO_UNICAST; - h->control = 0; - } - else - { - h->address = PPP_ALLSTATIONS; - h->control = PPP_UI; - } - if(sp->pp_flags & PP_CISCO) - { - h->protocol = htons(type); - } - else switch(type) - { - case ETH_P_IP: - h->protocol = htons(PPP_IP); - break; - case ETH_P_IPX: - h->protocol = htons(PPP_IPX); - break; - } - return sizeof(struct ppp_header); -} - -static const struct header_ops sppp_header_ops = { - .create = sppp_hard_header, -}; - -/* - * Send keepalive packets, every 10 seconds. - */ - -static void sppp_keepalive (unsigned long dummy) -{ - struct sppp *sp; - unsigned long flags; - - spin_lock_irqsave(&spppq_lock, flags); - - for (sp=spppq; sp; sp=sp->pp_next) - { - struct net_device *dev = sp->pp_if; - - /* Keepalive mode disabled or channel down? */ - if (! (sp->pp_flags & PP_KEEPALIVE) || - ! (dev->flags & IFF_UP)) - continue; - - spin_lock(&sp->lock); - - /* No keepalive in PPP mode if LCP not opened yet. */ - if (! (sp->pp_flags & PP_CISCO) && - sp->lcp.state != LCP_STATE_OPENED) { - spin_unlock(&sp->lock); - continue; - } - - if (sp->pp_alivecnt == MAXALIVECNT) { - /* No keepalive packets got. Stop the interface. */ - printk (KERN_WARNING "%s: protocol down\n", dev->name); - if_down (dev); - if (! (sp->pp_flags & PP_CISCO)) { - /* Shut down the PPP link. */ - sp->lcp.magic = jiffies; - sp->lcp.state = LCP_STATE_CLOSED; - sp->ipcp.state = IPCP_STATE_CLOSED; - sppp_clear_timeout (sp); - /* Initiate negotiation. */ - sppp_lcp_open (sp); - } - } - if (sp->pp_alivecnt <= MAXALIVECNT) - ++sp->pp_alivecnt; - if (sp->pp_flags & PP_CISCO) - sppp_cisco_send (sp, CISCO_KEEPALIVE_REQ, ++sp->pp_seq, - sp->pp_rseq); - else if (sp->lcp.state == LCP_STATE_OPENED) { - __be32 nmagic = htonl (sp->lcp.magic); - sp->lcp.echoid = ++sp->pp_seq; - sppp_cp_send (sp, PPP_LCP, LCP_ECHO_REQ, - sp->lcp.echoid, 4, &nmagic); - } - - spin_unlock(&sp->lock); - } - spin_unlock_irqrestore(&spppq_lock, flags); - sppp_flush_xmit(); - sppp_keepalive_timer.expires=jiffies+10*HZ; - add_timer(&sppp_keepalive_timer); -} - -/* - * Handle incoming PPP Link Control Protocol packets. - */ - -static void sppp_lcp_input (struct sppp *sp, struct sk_buff *skb) -{ - struct lcp_header *h; - struct net_device *dev = sp->pp_if; - int len = skb->len; - u8 *p, opt[6]; - u32 rmagic = 0; - - if (!pskb_may_pull(skb, sizeof(struct lcp_header))) { - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: invalid lcp packet length: %d bytes\n", - dev->name, len); - return; - } - h = (struct lcp_header *)skb->data; - skb_pull(skb,sizeof(struct lcp_header *)); - - if (sp->pp_flags & PP_DEBUG) - { - char state = '?'; - switch (sp->lcp.state) { - case LCP_STATE_CLOSED: state = 'C'; break; - case LCP_STATE_ACK_RCVD: state = 'R'; break; - case LCP_STATE_ACK_SENT: state = 'S'; break; - case LCP_STATE_OPENED: state = 'O'; break; - } - printk (KERN_WARNING "%s: lcp input(%c): %d bytes <%s id=%xh len=%xh", - dev->name, state, len, - sppp_lcp_type_name (h->type), h->ident, ntohs (h->len)); - if (len > 4) - sppp_print_bytes ((u8*) (h+1), len-4); - printk (">\n"); - } - if (len > ntohs (h->len)) - len = ntohs (h->len); - switch (h->type) { - default: - /* Unknown packet type -- send Code-Reject packet. */ - sppp_cp_send (sp, PPP_LCP, LCP_CODE_REJ, ++sp->pp_seq, - skb->len, h); - break; - case LCP_CONF_REQ: - if (len < 4) { - if (sp->pp_flags & PP_DEBUG) - printk (KERN_DEBUG"%s: invalid lcp configure request packet length: %d bytes\n", - dev->name, len); - break; - } - if (len>4 && !sppp_lcp_conf_parse_options (sp, h, len, &rmagic)) - goto badreq; - if (rmagic == sp->lcp.magic) { - /* Local and remote magics equal -- loopback? */ - if (sp->pp_loopcnt >= MAXALIVECNT*5) { - printk (KERN_WARNING "%s: loopback\n", - dev->name); - sp->pp_loopcnt = 0; - if (dev->flags & IFF_UP) { - if_down (dev); - } - } else if (sp->pp_flags & PP_DEBUG) - printk (KERN_DEBUG "%s: conf req: magic glitch\n", - dev->name); - ++sp->pp_loopcnt; - - /* MUST send Conf-Nack packet. */ - rmagic = ~sp->lcp.magic; - opt[0] = LCP_OPT_MAGIC; - opt[1] = sizeof (opt); - opt[2] = rmagic >> 24; - opt[3] = rmagic >> 16; - opt[4] = rmagic >> 8; - opt[5] = rmagic; - sppp_cp_send (sp, PPP_LCP, LCP_CONF_NAK, - h->ident, sizeof (opt), &opt); -badreq: - switch (sp->lcp.state) { - case LCP_STATE_OPENED: - /* Initiate renegotiation. */ - sppp_lcp_open (sp); - /* fall through... */ - case LCP_STATE_ACK_SENT: - /* Go to closed state. */ - sp->lcp.state = LCP_STATE_CLOSED; - sp->ipcp.state = IPCP_STATE_CLOSED; - } - break; - } - /* Send Configure-Ack packet. */ - sp->pp_loopcnt = 0; - if (sp->lcp.state != LCP_STATE_OPENED) { - sppp_cp_send (sp, PPP_LCP, LCP_CONF_ACK, - h->ident, len-4, h+1); - } - /* Change the state. */ - switch (sp->lcp.state) { - case LCP_STATE_CLOSED: - sp->lcp.state = LCP_STATE_ACK_SENT; - break; - case LCP_STATE_ACK_RCVD: - sp->lcp.state = LCP_STATE_OPENED; - sppp_ipcp_open (sp); - break; - case LCP_STATE_OPENED: - /* Remote magic changed -- close session. */ - sp->lcp.state = LCP_STATE_CLOSED; - sp->ipcp.state = IPCP_STATE_CLOSED; - /* Initiate renegotiation. */ - sppp_lcp_open (sp); - /* Send ACK after our REQ in attempt to break loop */ - sppp_cp_send (sp, PPP_LCP, LCP_CONF_ACK, - h->ident, len-4, h+1); - sp->lcp.state = LCP_STATE_ACK_SENT; - break; - } - break; - case LCP_CONF_ACK: - if (h->ident != sp->lcp.confid) - break; - sppp_clear_timeout (sp); - if ((sp->pp_link_state != SPPP_LINK_UP) && - (dev->flags & IFF_UP)) { - /* Coming out of loopback mode. */ - sp->pp_link_state=SPPP_LINK_UP; - printk (KERN_INFO "%s: protocol up\n", dev->name); - } - switch (sp->lcp.state) { - case LCP_STATE_CLOSED: - sp->lcp.state = LCP_STATE_ACK_RCVD; - sppp_set_timeout (sp, 5); - break; - case LCP_STATE_ACK_SENT: - sp->lcp.state = LCP_STATE_OPENED; - sppp_ipcp_open (sp); - break; - } - break; - case LCP_CONF_NAK: - if (h->ident != sp->lcp.confid) - break; - p = (u8*) (h+1); - if (len>=10 && p[0] == LCP_OPT_MAGIC && p[1] >= 4) { - rmagic = (u32)p[2] << 24 | - (u32)p[3] << 16 | p[4] << 8 | p[5]; - if (rmagic == ~sp->lcp.magic) { - int newmagic; - if (sp->pp_flags & PP_DEBUG) - printk (KERN_DEBUG "%s: conf nak: magic glitch\n", - dev->name); - get_random_bytes(&newmagic, sizeof(newmagic)); - sp->lcp.magic += newmagic; - } else - sp->lcp.magic = rmagic; - } - if (sp->lcp.state != LCP_STATE_ACK_SENT) { - /* Go to closed state. */ - sp->lcp.state = LCP_STATE_CLOSED; - sp->ipcp.state = IPCP_STATE_CLOSED; - } - /* The link will be renegotiated after timeout, - * to avoid endless req-nack loop. */ - sppp_clear_timeout (sp); - sppp_set_timeout (sp, 2); - break; - case LCP_CONF_REJ: - if (h->ident != sp->lcp.confid) - break; - sppp_clear_timeout (sp); - /* Initiate renegotiation. */ - sppp_lcp_open (sp); - if (sp->lcp.state != LCP_STATE_ACK_SENT) { - /* Go to closed state. */ - sp->lcp.state = LCP_STATE_CLOSED; - sp->ipcp.state = IPCP_STATE_CLOSED; - } - break; - case LCP_TERM_REQ: - sppp_clear_timeout (sp); - /* Send Terminate-Ack packet. */ - sppp_cp_send (sp, PPP_LCP, LCP_TERM_ACK, h->ident, 0, NULL); - /* Go to closed state. */ - sp->lcp.state = LCP_STATE_CLOSED; - sp->ipcp.state = IPCP_STATE_CLOSED; - /* Initiate renegotiation. */ - sppp_lcp_open (sp); - break; - case LCP_TERM_ACK: - case LCP_CODE_REJ: - case LCP_PROTO_REJ: - /* Ignore for now. */ - break; - case LCP_DISC_REQ: - /* Discard the packet. */ - break; - case LCP_ECHO_REQ: - if (sp->lcp.state != LCP_STATE_OPENED) - break; - if (len < 8) { - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: invalid lcp echo request packet length: %d bytes\n", - dev->name, len); - break; - } - if (ntohl (*(__be32*)(h+1)) == sp->lcp.magic) { - /* Line loopback mode detected. */ - printk (KERN_WARNING "%s: loopback\n", dev->name); - if_down (dev); - - /* Shut down the PPP link. */ - sp->lcp.state = LCP_STATE_CLOSED; - sp->ipcp.state = IPCP_STATE_CLOSED; - sppp_clear_timeout (sp); - /* Initiate negotiation. */ - sppp_lcp_open (sp); - break; - } - *(__be32 *)(h+1) = htonl (sp->lcp.magic); - sppp_cp_send (sp, PPP_LCP, LCP_ECHO_REPLY, h->ident, len-4, h+1); - break; - case LCP_ECHO_REPLY: - if (h->ident != sp->lcp.echoid) - break; - if (len < 8) { - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: invalid lcp echo reply packet length: %d bytes\n", - dev->name, len); - break; - } - if (ntohl(*(__be32 *)(h+1)) != sp->lcp.magic) - sp->pp_alivecnt = 0; - break; - } -} - -/* - * Handle incoming Cisco keepalive protocol packets. - */ - -static void sppp_cisco_input (struct sppp *sp, struct sk_buff *skb) -{ - struct cisco_packet *h; - struct net_device *dev = sp->pp_if; - - if (!pskb_may_pull(skb, sizeof(struct cisco_packet)) - || (skb->len != CISCO_PACKET_LEN - && skb->len != CISCO_BIG_PACKET_LEN)) { - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: invalid cisco packet length: %d bytes\n", - dev->name, skb->len); - return; - } - h = (struct cisco_packet *)skb->data; - skb_pull(skb, sizeof(struct cisco_packet*)); - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: cisco input: %d bytes <%xh %xh %xh %xh %xh-%xh>\n", - dev->name, skb->len, - ntohl (h->type), h->par1, h->par2, h->rel, - h->time0, h->time1); - switch (ntohl (h->type)) { - default: - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: unknown cisco packet type: 0x%x\n", - dev->name, ntohl (h->type)); - break; - case CISCO_ADDR_REPLY: - /* Reply on address request, ignore */ - break; - case CISCO_KEEPALIVE_REQ: - sp->pp_alivecnt = 0; - sp->pp_rseq = ntohl (h->par1); - if (sp->pp_seq == sp->pp_rseq) { - /* Local and remote sequence numbers are equal. - * Probably, the line is in loopback mode. */ - int newseq; - if (sp->pp_loopcnt >= MAXALIVECNT) { - printk (KERN_WARNING "%s: loopback\n", - dev->name); - sp->pp_loopcnt = 0; - if (dev->flags & IFF_UP) { - if_down (dev); - } - } - ++sp->pp_loopcnt; - - /* Generate new local sequence number */ - get_random_bytes(&newseq, sizeof(newseq)); - sp->pp_seq ^= newseq; - break; - } - sp->pp_loopcnt = 0; - if (sp->pp_link_state==SPPP_LINK_DOWN && - (dev->flags & IFF_UP)) { - sp->pp_link_state=SPPP_LINK_UP; - printk (KERN_INFO "%s: protocol up\n", dev->name); - } - break; - case CISCO_ADDR_REQ: - /* Stolen from net/ipv4/devinet.c -- SIOCGIFADDR ioctl */ - { - __be32 addr = 0, mask = htonl(~0U); /* FIXME: is the mask correct? */ -#ifdef CONFIG_INET - struct in_device *in_dev; - struct in_ifaddr *ifa; - - rcu_read_lock(); - if ((in_dev = __in_dev_get_rcu(dev)) != NULL) - { - for (ifa=in_dev->ifa_list; ifa != NULL; - ifa=ifa->ifa_next) { - if (strcmp(dev->name, ifa->ifa_label) == 0) - { - addr = ifa->ifa_local; - mask = ifa->ifa_mask; - break; - } - } - } - rcu_read_unlock(); -#endif - sppp_cisco_send (sp, CISCO_ADDR_REPLY, ntohl(addr), ntohl(mask)); - break; - } - } -} - - -/* - * Send PPP LCP packet. - */ - -static void sppp_cp_send (struct sppp *sp, u16 proto, u8 type, - u8 ident, u16 len, void *data) -{ - struct ppp_header *h; - struct lcp_header *lh; - struct sk_buff *skb; - struct net_device *dev = sp->pp_if; - - skb=alloc_skb(dev->hard_header_len+PPP_HEADER_LEN+LCP_HEADER_LEN+len, - GFP_ATOMIC); - if (skb==NULL) - return; - - skb_reserve(skb,dev->hard_header_len); - - h = (struct ppp_header *)skb_put(skb, sizeof(struct ppp_header)); - h->address = PPP_ALLSTATIONS; /* broadcast address */ - h->control = PPP_UI; /* Unnumbered Info */ - h->protocol = htons (proto); /* Link Control Protocol */ - - lh = (struct lcp_header *)skb_put(skb, sizeof(struct lcp_header)); - lh->type = type; - lh->ident = ident; - lh->len = htons (LCP_HEADER_LEN + len); - - if (len) - memcpy(skb_put(skb,len),data, len); - - if (sp->pp_flags & PP_DEBUG) { - printk (KERN_WARNING "%s: %s output <%s id=%xh len=%xh", - dev->name, - proto==PPP_LCP ? "lcp" : "ipcp", - proto==PPP_LCP ? sppp_lcp_type_name (lh->type) : - sppp_ipcp_type_name (lh->type), lh->ident, - ntohs (lh->len)); - if (len) - sppp_print_bytes ((u8*) (lh+1), len); - printk (">\n"); - } - /* Control is high priority so it doesn't get queued behind data */ - skb->priority=TC_PRIO_CONTROL; - skb->dev = dev; - skb_queue_tail(&tx_queue, skb); -} - -/* - * Send Cisco keepalive packet. - */ - -static void sppp_cisco_send (struct sppp *sp, int type, u32 par1, u32 par2) -{ - struct ppp_header *h; - struct cisco_packet *ch; - struct sk_buff *skb; - struct net_device *dev = sp->pp_if; - u32 t = jiffies * 1000/HZ; - - skb=alloc_skb(dev->hard_header_len+PPP_HEADER_LEN+CISCO_PACKET_LEN, - GFP_ATOMIC); - - if(skb==NULL) - return; - - skb_reserve(skb, dev->hard_header_len); - h = (struct ppp_header *)skb_put (skb, sizeof(struct ppp_header)); - h->address = CISCO_MULTICAST; - h->control = 0; - h->protocol = htons (CISCO_KEEPALIVE); - - ch = (struct cisco_packet*)skb_put(skb, CISCO_PACKET_LEN); - ch->type = htonl (type); - ch->par1 = htonl (par1); - ch->par2 = htonl (par2); - ch->rel = htons(0xffff); - ch->time0 = htons ((u16) (t >> 16)); - ch->time1 = htons ((u16) t); - - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: cisco output: <%xh %xh %xh %xh %xh-%xh>\n", - dev->name, ntohl (ch->type), ch->par1, - ch->par2, ch->rel, ch->time0, ch->time1); - skb->priority=TC_PRIO_CONTROL; - skb->dev = dev; - skb_queue_tail(&tx_queue, skb); -} - -/** - * sppp_close - close down a synchronous PPP or Cisco HDLC link - * @dev: The network device to drop the link of - * - * This drops the logical interface to the channel. It is not - * done politely as we assume we will also be dropping DTR. Any - * timeouts are killed. - */ - -int sppp_close (struct net_device *dev) -{ - struct sppp *sp = (struct sppp *)sppp_of(dev); - unsigned long flags; - - spin_lock_irqsave(&sp->lock, flags); - sp->pp_link_state = SPPP_LINK_DOWN; - sp->lcp.state = LCP_STATE_CLOSED; - sp->ipcp.state = IPCP_STATE_CLOSED; - sppp_clear_timeout (sp); - spin_unlock_irqrestore(&sp->lock, flags); - - return 0; -} - -EXPORT_SYMBOL(sppp_close); - -/** - * sppp_open - open a synchronous PPP or Cisco HDLC link - * @dev: Network device to activate - * - * Close down any existing synchronous session and commence - * from scratch. In the PPP case this means negotiating LCP/IPCP - * and friends, while for Cisco HDLC we simply need to start sending - * keepalives - */ - -int sppp_open (struct net_device *dev) -{ - struct sppp *sp = (struct sppp *)sppp_of(dev); - unsigned long flags; - - sppp_close(dev); - - spin_lock_irqsave(&sp->lock, flags); - if (!(sp->pp_flags & PP_CISCO)) { - sppp_lcp_open (sp); - } - sp->pp_link_state = SPPP_LINK_DOWN; - spin_unlock_irqrestore(&sp->lock, flags); - sppp_flush_xmit(); - - return 0; -} - -EXPORT_SYMBOL(sppp_open); - -/** - * sppp_reopen - notify of physical link loss - * @dev: Device that lost the link - * - * This function informs the synchronous protocol code that - * the underlying link died (for example a carrier drop on X.21) - * - * We increment the magic numbers to ensure that if the other end - * failed to notice we will correctly start a new session. It happens - * do to the nature of telco circuits is that you can lose carrier on - * one endonly. - * - * Having done this we go back to negotiating. This function may - * be called from an interrupt context. - */ - -int sppp_reopen (struct net_device *dev) -{ - struct sppp *sp = (struct sppp *)sppp_of(dev); - unsigned long flags; - - sppp_close(dev); - - spin_lock_irqsave(&sp->lock, flags); - if (!(sp->pp_flags & PP_CISCO)) - { - sp->lcp.magic = jiffies; - ++sp->pp_seq; - sp->lcp.state = LCP_STATE_CLOSED; - sp->ipcp.state = IPCP_STATE_CLOSED; - /* Give it a moment for the line to settle then go */ - sppp_set_timeout (sp, 1); - } - sp->pp_link_state=SPPP_LINK_DOWN; - spin_unlock_irqrestore(&sp->lock, flags); - - return 0; -} - -EXPORT_SYMBOL(sppp_reopen); - -/** - * sppp_change_mtu - Change the link MTU - * @dev: Device to change MTU on - * @new_mtu: New MTU - * - * Change the MTU on the link. This can only be called with - * the link down. It returns an error if the link is up or - * the mtu is out of range. - */ - -static int sppp_change_mtu(struct net_device *dev, int new_mtu) -{ - if(new_mtu<128||new_mtu>PPP_MTU||(dev->flags&IFF_UP)) - return -EINVAL; - dev->mtu=new_mtu; - return 0; -} - -/** - * sppp_do_ioctl - Ioctl handler for ppp/hdlc - * @dev: Device subject to ioctl - * @ifr: Interface request block from the user - * @cmd: Command that is being issued - * - * This function handles the ioctls that may be issued by the user - * to control the settings of a PPP/HDLC link. It does both busy - * and security checks. This function is intended to be wrapped by - * callers who wish to add additional ioctl calls of their own. - */ - -int sppp_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - struct sppp *sp = (struct sppp *)sppp_of(dev); - - if(dev->flags&IFF_UP) - return -EBUSY; - - if(!capable(CAP_NET_ADMIN)) - return -EPERM; - - switch(cmd) - { - case SPPPIOCCISCO: - sp->pp_flags|=PP_CISCO; - dev->type = ARPHRD_HDLC; - break; - case SPPPIOCPPP: - sp->pp_flags&=~PP_CISCO; - dev->type = ARPHRD_PPP; - break; - case SPPPIOCDEBUG: - sp->pp_flags&=~PP_DEBUG; - if(ifr->ifr_flags) - sp->pp_flags|=PP_DEBUG; - break; - case SPPPIOCGFLAGS: - if(copy_to_user(ifr->ifr_data, &sp->pp_flags, sizeof(sp->pp_flags))) - return -EFAULT; - break; - case SPPPIOCSFLAGS: - if(copy_from_user(&sp->pp_flags, ifr->ifr_data, sizeof(sp->pp_flags))) - return -EFAULT; - break; - default: - return -EINVAL; - } - return 0; -} - -EXPORT_SYMBOL(sppp_do_ioctl); - -/** - * sppp_attach - attach synchronous PPP/HDLC to a device - * @pd: PPP device to initialise - * - * This initialises the PPP/HDLC support on an interface. At the - * time of calling the dev element must point to the network device - * that this interface is attached to. The interface should not yet - * be registered. - */ - -void sppp_attach(struct ppp_device *pd) -{ - struct net_device *dev = pd->dev; - struct sppp *sp = &pd->sppp; - unsigned long flags; - - /* Make sure embedding is safe for sppp_of */ - BUG_ON(sppp_of(dev) != sp); - - spin_lock_irqsave(&spppq_lock, flags); - /* Initialize keepalive handler. */ - if (! spppq) - { - init_timer(&sppp_keepalive_timer); - sppp_keepalive_timer.expires=jiffies+10*HZ; - sppp_keepalive_timer.function=sppp_keepalive; - add_timer(&sppp_keepalive_timer); - } - /* Insert new entry into the keepalive list. */ - sp->pp_next = spppq; - spppq = sp; - spin_unlock_irqrestore(&spppq_lock, flags); - - sp->pp_loopcnt = 0; - sp->pp_alivecnt = 0; - sp->pp_seq = 0; - sp->pp_rseq = 0; - sp->pp_flags = PP_KEEPALIVE|PP_CISCO|debug;/*PP_DEBUG;*/ - sp->lcp.magic = 0; - sp->lcp.state = LCP_STATE_CLOSED; - sp->ipcp.state = IPCP_STATE_CLOSED; - sp->pp_if = dev; - spin_lock_init(&sp->lock); - - /* - * Device specific setup. All but interrupt handler and - * hard_start_xmit. - */ - - dev->header_ops = &sppp_header_ops; - - dev->tx_queue_len = 10; - dev->type = ARPHRD_HDLC; - dev->addr_len = 0; - dev->hard_header_len = sizeof(struct ppp_header); - dev->mtu = PPP_MTU; - /* - * These 4 are callers but MUST also call sppp_ functions - */ - dev->do_ioctl = sppp_do_ioctl; -#if 0 - dev->get_stats = NULL; /* Let the driver override these */ - dev->open = sppp_open; - dev->stop = sppp_close; -#endif - dev->change_mtu = sppp_change_mtu; - dev->flags = IFF_MULTICAST|IFF_POINTOPOINT|IFF_NOARP; -} - -EXPORT_SYMBOL(sppp_attach); - -/** - * sppp_detach - release PPP resources from a device - * @dev: Network device to release - * - * Stop and free up any PPP/HDLC resources used by this - * interface. This must be called before the device is - * freed. - */ - -void sppp_detach (struct net_device *dev) -{ - struct sppp **q, *p, *sp = (struct sppp *)sppp_of(dev); - unsigned long flags; - - spin_lock_irqsave(&spppq_lock, flags); - /* Remove the entry from the keepalive list. */ - for (q = &spppq; (p = *q); q = &p->pp_next) - if (p == sp) { - *q = p->pp_next; - break; - } - - /* Stop keepalive handler. */ - if (! spppq) - del_timer(&sppp_keepalive_timer); - sppp_clear_timeout (sp); - spin_unlock_irqrestore(&spppq_lock, flags); -} - -EXPORT_SYMBOL(sppp_detach); - -/* - * Analyze the LCP Configure-Request options list - * for the presence of unknown options. - * If the request contains unknown options, build and - * send Configure-reject packet, containing only unknown options. - */ -static int -sppp_lcp_conf_parse_options (struct sppp *sp, struct lcp_header *h, - int len, u32 *magic) -{ - u8 *buf, *r, *p; - int rlen; - - len -= 4; - buf = r = kmalloc (len, GFP_ATOMIC); - if (! buf) - return (0); - - p = (void*) (h+1); - for (rlen=0; len>1 && p[1]; len-=p[1], p+=p[1]) { - switch (*p) { - case LCP_OPT_MAGIC: - /* Magic number -- extract. */ - if (len >= 6 && p[1] == 6) { - *magic = (u32)p[2] << 24 | - (u32)p[3] << 16 | p[4] << 8 | p[5]; - continue; - } - break; - case LCP_OPT_ASYNC_MAP: - /* Async control character map -- check to be zero. */ - if (len >= 6 && p[1] == 6 && ! p[2] && ! p[3] && - ! p[4] && ! p[5]) - continue; - break; - case LCP_OPT_MRU: - /* Maximum receive unit -- always OK. */ - continue; - default: - /* Others not supported. */ - break; - } - /* Add the option to rejected list. */ - memcpy(r, p, p[1]); - r += p[1]; - rlen += p[1]; - } - if (rlen) - sppp_cp_send (sp, PPP_LCP, LCP_CONF_REJ, h->ident, rlen, buf); - kfree(buf); - return (rlen == 0); -} - -static void sppp_ipcp_input (struct sppp *sp, struct sk_buff *skb) -{ - struct lcp_header *h; - struct net_device *dev = sp->pp_if; - int len = skb->len; - - if (!pskb_may_pull(skb, sizeof(struct lcp_header))) { - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: invalid ipcp packet length: %d bytes\n", - dev->name, len); - return; - } - h = (struct lcp_header *)skb->data; - skb_pull(skb,sizeof(struct lcp_header)); - if (sp->pp_flags & PP_DEBUG) { - printk (KERN_WARNING "%s: ipcp input: %d bytes <%s id=%xh len=%xh", - dev->name, len, - sppp_ipcp_type_name (h->type), h->ident, ntohs (h->len)); - if (len > 4) - sppp_print_bytes ((u8*) (h+1), len-4); - printk (">\n"); - } - if (len > ntohs (h->len)) - len = ntohs (h->len); - switch (h->type) { - default: - /* Unknown packet type -- send Code-Reject packet. */ - sppp_cp_send (sp, PPP_IPCP, IPCP_CODE_REJ, ++sp->pp_seq, len, h); - break; - case IPCP_CONF_REQ: - if (len < 4) { - if (sp->pp_flags & PP_DEBUG) - printk (KERN_WARNING "%s: invalid ipcp configure request packet length: %d bytes\n", - dev->name, len); - return; - } - if (len > 4) { - sppp_cp_send (sp, PPP_IPCP, LCP_CONF_REJ, h->ident, - len-4, h+1); - - switch (sp->ipcp.state) { - case IPCP_STATE_OPENED: - /* Initiate renegotiation. */ - sppp_ipcp_open (sp); - /* fall through... */ - case IPCP_STATE_ACK_SENT: - /* Go to closed state. */ - sp->ipcp.state = IPCP_STATE_CLOSED; - } - } else { - /* Send Configure-Ack packet. */ - sppp_cp_send (sp, PPP_IPCP, IPCP_CONF_ACK, h->ident, - 0, NULL); - /* Change the state. */ - if (sp->ipcp.state == IPCP_STATE_ACK_RCVD) - sp->ipcp.state = IPCP_STATE_OPENED; - else - sp->ipcp.state = IPCP_STATE_ACK_SENT; - } - break; - case IPCP_CONF_ACK: - if (h->ident != sp->ipcp.confid) - break; - sppp_clear_timeout (sp); - switch (sp->ipcp.state) { - case IPCP_STATE_CLOSED: - sp->ipcp.state = IPCP_STATE_ACK_RCVD; - sppp_set_timeout (sp, 5); - break; - case IPCP_STATE_ACK_SENT: - sp->ipcp.state = IPCP_STATE_OPENED; - break; - } - break; - case IPCP_CONF_NAK: - case IPCP_CONF_REJ: - if (h->ident != sp->ipcp.confid) - break; - sppp_clear_timeout (sp); - /* Initiate renegotiation. */ - sppp_ipcp_open (sp); - if (sp->ipcp.state != IPCP_STATE_ACK_SENT) - /* Go to closed state. */ - sp->ipcp.state = IPCP_STATE_CLOSED; - break; - case IPCP_TERM_REQ: - /* Send Terminate-Ack packet. */ - sppp_cp_send (sp, PPP_IPCP, IPCP_TERM_ACK, h->ident, 0, NULL); - /* Go to closed state. */ - sp->ipcp.state = IPCP_STATE_CLOSED; - /* Initiate renegotiation. */ - sppp_ipcp_open (sp); - break; - case IPCP_TERM_ACK: - /* Ignore for now. */ - case IPCP_CODE_REJ: - /* Ignore for now. */ - break; - } -} - -static void sppp_lcp_open (struct sppp *sp) -{ - char opt[6]; - - if (! sp->lcp.magic) - sp->lcp.magic = jiffies; - opt[0] = LCP_OPT_MAGIC; - opt[1] = sizeof (opt); - opt[2] = sp->lcp.magic >> 24; - opt[3] = sp->lcp.magic >> 16; - opt[4] = sp->lcp.magic >> 8; - opt[5] = sp->lcp.magic; - sp->lcp.confid = ++sp->pp_seq; - sppp_cp_send (sp, PPP_LCP, LCP_CONF_REQ, sp->lcp.confid, - sizeof (opt), &opt); - sppp_set_timeout (sp, 2); -} - -static void sppp_ipcp_open (struct sppp *sp) -{ - sp->ipcp.confid = ++sp->pp_seq; - sppp_cp_send (sp, PPP_IPCP, IPCP_CONF_REQ, sp->ipcp.confid, 0, NULL); - sppp_set_timeout (sp, 2); -} - -/* - * Process PPP control protocol timeouts. - */ - -static void sppp_cp_timeout (unsigned long arg) -{ - struct sppp *sp = (struct sppp*) arg; - unsigned long flags; - - spin_lock_irqsave(&sp->lock, flags); - - sp->pp_flags &= ~PP_TIMO; - if (! (sp->pp_if->flags & IFF_UP) || (sp->pp_flags & PP_CISCO)) { - spin_unlock_irqrestore(&sp->lock, flags); - return; - } - switch (sp->lcp.state) { - case LCP_STATE_CLOSED: - /* No ACK for Configure-Request, retry. */ - sppp_lcp_open (sp); - break; - case LCP_STATE_ACK_RCVD: - /* ACK got, but no Configure-Request for peer, retry. */ - sppp_lcp_open (sp); - sp->lcp.state = LCP_STATE_CLOSED; - break; - case LCP_STATE_ACK_SENT: - /* ACK sent but no ACK for Configure-Request, retry. */ - sppp_lcp_open (sp); - break; - case LCP_STATE_OPENED: - /* LCP is already OK, try IPCP. */ - switch (sp->ipcp.state) { - case IPCP_STATE_CLOSED: - /* No ACK for Configure-Request, retry. */ - sppp_ipcp_open (sp); - break; - case IPCP_STATE_ACK_RCVD: - /* ACK got, but no Configure-Request for peer, retry. */ - sppp_ipcp_open (sp); - sp->ipcp.state = IPCP_STATE_CLOSED; - break; - case IPCP_STATE_ACK_SENT: - /* ACK sent but no ACK for Configure-Request, retry. */ - sppp_ipcp_open (sp); - break; - case IPCP_STATE_OPENED: - /* IPCP is OK. */ - break; - } - break; - } - spin_unlock_irqrestore(&sp->lock, flags); - sppp_flush_xmit(); -} - -static char *sppp_lcp_type_name (u8 type) -{ - static char buf [8]; - switch (type) { - case LCP_CONF_REQ: return ("conf-req"); - case LCP_CONF_ACK: return ("conf-ack"); - case LCP_CONF_NAK: return ("conf-nack"); - case LCP_CONF_REJ: return ("conf-rej"); - case LCP_TERM_REQ: return ("term-req"); - case LCP_TERM_ACK: return ("term-ack"); - case LCP_CODE_REJ: return ("code-rej"); - case LCP_PROTO_REJ: return ("proto-rej"); - case LCP_ECHO_REQ: return ("echo-req"); - case LCP_ECHO_REPLY: return ("echo-reply"); - case LCP_DISC_REQ: return ("discard-req"); - } - sprintf (buf, "%xh", type); - return (buf); -} - -static char *sppp_ipcp_type_name (u8 type) -{ - static char buf [8]; - switch (type) { - case IPCP_CONF_REQ: return ("conf-req"); - case IPCP_CONF_ACK: return ("conf-ack"); - case IPCP_CONF_NAK: return ("conf-nack"); - case IPCP_CONF_REJ: return ("conf-rej"); - case IPCP_TERM_REQ: return ("term-req"); - case IPCP_TERM_ACK: return ("term-ack"); - case IPCP_CODE_REJ: return ("code-rej"); - } - sprintf (buf, "%xh", type); - return (buf); -} - -static void sppp_print_bytes (u_char *p, u16 len) -{ - printk (" %x", *p++); - while (--len > 0) - printk ("-%x", *p++); -} - -/** - * sppp_rcv - receive and process a WAN PPP frame - * @skb: The buffer to process - * @dev: The device it arrived on - * @p: Unused - * @orig_dev: Unused - * - * Protocol glue. This drives the deferred processing mode the poorer - * cards use. This can be called directly by cards that do not have - * timing constraints but is normally called from the network layer - * after interrupt servicing to process frames queued via netif_rx. - */ - -static int sppp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *p, struct net_device *orig_dev) -{ - if (dev_net(dev) != &init_net) { - kfree_skb(skb); - return 0; - } - - if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) - return NET_RX_DROP; - sppp_input(dev,skb); - return 0; -} - -static struct packet_type sppp_packet_type = { - .type = __constant_htons(ETH_P_WAN_PPP), - .func = sppp_rcv, -}; - -static char banner[] __initdata = - KERN_INFO "Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994\n" - KERN_INFO "Linux port (c) 1998 Building Number Three Ltd & " - "Jan \"Yenya\" Kasprzak.\n"; - -static int __init sync_ppp_init(void) -{ - if(debug) - debug=PP_DEBUG; - printk(banner); - skb_queue_head_init(&tx_queue); - dev_add_pack(&sppp_packet_type); - return 0; -} - - -static void __exit sync_ppp_cleanup(void) -{ - dev_remove_pack(&sppp_packet_type); -} - -module_init(sync_ppp_init); -module_exit(sync_ppp_cleanup); -module_param(debug, int, 0); -MODULE_LICENSE("GPL"); - diff --git a/include/net/syncppp.h b/include/net/syncppp.h deleted file mode 100644 index 9e306f7f579a..000000000000 --- a/include/net/syncppp.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Defines for synchronous PPP/Cisco link level subroutines. - * - * Copyright (C) 1994 Cronyx Ltd. - * Author: Serge Vakulenko, - * - * This software is distributed with NO WARRANTIES, not even the implied - * warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Authors grant any other persons or organizations permission to use - * or modify this software as long as this message is kept with the software, - * all derivative works or modified versions. - * - * Version 1.7, Wed Jun 7 22:12:02 MSD 1995 - * - * - * - */ - -#ifndef _SYNCPPP_H_ -#define _SYNCPPP_H_ 1 - -#ifdef __KERNEL__ -struct slcp { - u16 state; /* state machine */ - u32 magic; /* local magic number */ - u_char echoid; /* id of last keepalive echo request */ - u_char confid; /* id of last configuration request */ -}; - -struct sipcp { - u16 state; /* state machine */ - u_char confid; /* id of last configuration request */ -}; - -struct sppp -{ - struct sppp * pp_next; /* next interface in keepalive list */ - u32 pp_flags; /* use Cisco protocol instead of PPP */ - u16 pp_alivecnt; /* keepalive packets counter */ - u16 pp_loopcnt; /* loopback detection counter */ - u32 pp_seq; /* local sequence number */ - u32 pp_rseq; /* remote sequence number */ - struct slcp lcp; /* LCP params */ - struct sipcp ipcp; /* IPCP params */ - struct timer_list pp_timer; - struct net_device *pp_if; - char pp_link_state; /* Link status */ - spinlock_t lock; -}; - -struct ppp_device -{ - struct net_device *dev; /* Network device pointer */ - struct sppp sppp; /* Synchronous PPP */ -}; - -static inline struct sppp *sppp_of(struct net_device *dev) -{ - struct ppp_device **ppp = dev->ml_priv; - BUG_ON((*ppp)->dev != dev); - return &(*ppp)->sppp; -} - -#define PP_KEEPALIVE 0x01 /* use keepalive protocol */ -#define PP_CISCO 0x02 /* use Cisco protocol instead of PPP */ -#define PP_TIMO 0x04 /* cp_timeout routine active */ -#define PP_DEBUG 0x08 - -#define PPP_MTU 1500 /* max. transmit unit */ - -#define LCP_STATE_CLOSED 0 /* LCP state: closed (conf-req sent) */ -#define LCP_STATE_ACK_RCVD 1 /* LCP state: conf-ack received */ -#define LCP_STATE_ACK_SENT 2 /* LCP state: conf-ack sent */ -#define LCP_STATE_OPENED 3 /* LCP state: opened */ - -#define IPCP_STATE_CLOSED 0 /* IPCP state: closed (conf-req sent) */ -#define IPCP_STATE_ACK_RCVD 1 /* IPCP state: conf-ack received */ -#define IPCP_STATE_ACK_SENT 2 /* IPCP state: conf-ack sent */ -#define IPCP_STATE_OPENED 3 /* IPCP state: opened */ - -#define SPPP_LINK_DOWN 0 /* link down - no keepalive */ -#define SPPP_LINK_UP 1 /* link is up - keepalive ok */ - -void sppp_attach (struct ppp_device *pd); -void sppp_detach (struct net_device *dev); -int sppp_do_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd); -struct sk_buff *sppp_dequeue (struct net_device *dev); -int sppp_isempty (struct net_device *dev); -void sppp_flush (struct net_device *dev); -int sppp_open (struct net_device *dev); -int sppp_reopen (struct net_device *dev); -int sppp_close (struct net_device *dev); -#endif - -#define SPPPIOCCISCO (SIOCDEVPRIVATE) -#define SPPPIOCPPP (SIOCDEVPRIVATE+1) -#define SPPPIOCDEBUG (SIOCDEVPRIVATE+2) -#define SPPPIOCSFLAGS (SIOCDEVPRIVATE+3) -#define SPPPIOCGFLAGS (SIOCDEVPRIVATE+4) - -#endif /* _SYNCPPP_H_ */ -- cgit v1.2.3 From a5fcf89eff2372b50f2d47fbb3e1f3090f044ee3 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Sat, 22 Nov 2008 09:40:55 +0800 Subject: ALSA: hda - document the ELD proc interface Describe what ELD proc interface provides and how to fix incorrect values. Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/Procfile.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt index f738b296440a..bba2dbb79d81 100644 --- a/Documentation/sound/alsa/Procfile.txt +++ b/Documentation/sound/alsa/Procfile.txt @@ -153,6 +153,16 @@ card*/codec#* Shows the general codec information and the attribute of each widget node. +card*/eld#* + Available for HDMI or DisplayPort interfaces. + Shows ELD(EDID Like Data) info retrieved from the attached HDMI sink, + and describes its audio capabilities and configurations. + + Some ELD fields may be modified by doing `echo name hex_value > eld#*`. + Only do this if you are sure the HDMI sink provided value is wrong. + And if that makes your HDMI audio work, please report to us so that we + can fix it in future kernel releases. + Sequencer Information --------------------- -- cgit v1.2.3 From 02b67518e2b1c490787dac7f35e1204e74fe21ba Mon Sep 17 00:00:00 2001 From: Török Edwin Date: Sat, 22 Nov 2008 13:28:47 +0200 Subject: tracing: add support for userspace stacktraces in tracing/iter_ctrl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Impact: add new (default-off) tracing visualization feature Usage example: mount -t debugfs nodev /sys/kernel/debug cd /sys/kernel/debug/tracing echo userstacktrace >iter_ctrl echo sched_switch >current_tracer echo 1 >tracing_enabled .... run application ... echo 0 >tracing_enabled Then read one of 'trace','latency_trace','trace_pipe'. To get the best output you can compile your userspace programs with frame pointers (at least glibc + the app you are tracing). Signed-off-by: Török Edwin Signed-off-by: Ingo Molnar --- Documentation/ftrace.txt | 5 ++- arch/x86/kernel/stacktrace.c | 57 +++++++++++++++++++++++++++ include/linux/stacktrace.h | 8 ++++ kernel/trace/trace.c | 93 ++++++++++++++++++++++++++++++++++++++++++++ kernel/trace/trace.h | 9 +++++ 5 files changed, 171 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 753f4de4b175..79a80f79c062 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -324,7 +324,7 @@ output. To see what is available, simply cat the file: cat /debug/tracing/trace_options print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \ - noblock nostacktrace nosched-tree + noblock nostacktrace nosched-tree nouserstacktrace To disable one of the options, echo in the option prepended with "no". @@ -378,6 +378,9 @@ Here are the available options: When a trace is recorded, so is the stack of functions. This allows for back traces of trace sites. + userstacktrace - This option changes the trace. + It records a stacktrace of the current userspace thread. + sched-tree - TBD (any users??) diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index a03e7f6d90c3..b15153060417 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -6,6 +6,7 @@ #include #include #include +#include #include static void save_stack_warning(void *data, char *msg) @@ -83,3 +84,59 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) trace->entries[trace->nr_entries++] = ULONG_MAX; } EXPORT_SYMBOL_GPL(save_stack_trace_tsk); + +/* Userspace stacktrace - based on kernel/trace/trace_sysprof.c */ + +struct stack_frame { + const void __user *next_fp; + unsigned long return_address; +}; + +static int copy_stack_frame(const void __user *fp, struct stack_frame *frame) +{ + int ret; + + if (!access_ok(VERIFY_READ, fp, sizeof(*frame))) + return 0; + + ret = 1; + pagefault_disable(); + if (__copy_from_user_inatomic(frame, fp, sizeof(*frame))) + ret = 0; + pagefault_enable(); + + return ret; +} + +void save_stack_trace_user(struct stack_trace *trace) +{ + /* + * Trace user stack if we are not a kernel thread + */ + if (current->mm) { + const struct pt_regs *regs = task_pt_regs(current); + const void __user *fp = (const void __user *)regs->bp; + + if (trace->nr_entries < trace->max_entries) + trace->entries[trace->nr_entries++] = regs->ip; + + while (trace->nr_entries < trace->max_entries) { + struct stack_frame frame; + frame.next_fp = NULL; + frame.return_address = 0; + if (!copy_stack_frame(fp, &frame)) + break; + if ((unsigned long)fp < regs->sp) + break; + if (frame.return_address) + trace->entries[trace->nr_entries++] = + frame.return_address; + if (fp == frame.next_fp) + break; + fp = frame.next_fp; + } + } + if (trace->nr_entries < trace->max_entries) + trace->entries[trace->nr_entries++] = ULONG_MAX; +} + diff --git a/include/linux/stacktrace.h b/include/linux/stacktrace.h index b106fd8e0d5c..68de51468f5d 100644 --- a/include/linux/stacktrace.h +++ b/include/linux/stacktrace.h @@ -15,9 +15,17 @@ extern void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace); extern void print_stack_trace(struct stack_trace *trace, int spaces); + +#ifdef CONFIG_X86 +extern void save_stack_trace_user(struct stack_trace *trace); +#else +# define save_stack_trace_user(trace) do { } while (0) +#endif + #else # define save_stack_trace(trace) do { } while (0) # define save_stack_trace_tsk(tsk, trace) do { } while (0) +# define save_stack_trace_user(trace) do { } while (0) # define print_stack_trace(trace, spaces) do { } while (0) #endif diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 4ee6f0375222..ced8b4fa9f51 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -275,6 +275,7 @@ static const char *trace_options[] = { "ftrace_preempt", "branch", "annotate", + "userstacktrace", NULL }; @@ -918,6 +919,44 @@ void __trace_stack(struct trace_array *tr, ftrace_trace_stack(tr, data, flags, skip, preempt_count()); } +static void ftrace_trace_userstack(struct trace_array *tr, + struct trace_array_cpu *data, + unsigned long flags, int pc) +{ + struct userstack_entry *entry; + struct stack_trace trace; + struct ring_buffer_event *event; + unsigned long irq_flags; + + if (!(trace_flags & TRACE_ITER_USERSTACKTRACE)) + return; + + event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry), + &irq_flags); + if (!event) + return; + entry = ring_buffer_event_data(event); + tracing_generic_entry_update(&entry->ent, flags, pc); + entry->ent.type = TRACE_USER_STACK; + + memset(&entry->caller, 0, sizeof(entry->caller)); + + trace.nr_entries = 0; + trace.max_entries = FTRACE_STACK_ENTRIES; + trace.skip = 0; + trace.entries = entry->caller; + + save_stack_trace_user(&trace); + ring_buffer_unlock_commit(tr->buffer, event, irq_flags); +} + +void __trace_userstack(struct trace_array *tr, + struct trace_array_cpu *data, + unsigned long flags) +{ + ftrace_trace_userstack(tr, data, flags, preempt_count()); +} + static void ftrace_trace_special(void *__tr, void *__data, unsigned long arg1, unsigned long arg2, unsigned long arg3, @@ -941,6 +980,7 @@ ftrace_trace_special(void *__tr, void *__data, entry->arg3 = arg3; ring_buffer_unlock_commit(tr->buffer, event, irq_flags); ftrace_trace_stack(tr, data, irq_flags, 4, pc); + ftrace_trace_userstack(tr, data, irq_flags, pc); trace_wake_up(); } @@ -979,6 +1019,7 @@ tracing_sched_switch_trace(struct trace_array *tr, entry->next_cpu = task_cpu(next); ring_buffer_unlock_commit(tr->buffer, event, irq_flags); ftrace_trace_stack(tr, data, flags, 5, pc); + ftrace_trace_userstack(tr, data, flags, pc); } void @@ -1008,6 +1049,7 @@ tracing_sched_wakeup_trace(struct trace_array *tr, entry->next_cpu = task_cpu(wakee); ring_buffer_unlock_commit(tr->buffer, event, irq_flags); ftrace_trace_stack(tr, data, flags, 6, pc); + ftrace_trace_userstack(tr, data, flags, pc); trace_wake_up(); } @@ -1387,6 +1429,31 @@ seq_print_ip_sym(struct trace_seq *s, unsigned long ip, unsigned long sym_flags) return ret; } +static int +seq_print_userip_objs(const struct userstack_entry *entry, struct trace_seq *s, + unsigned long sym_flags) +{ + int ret = 1; + unsigned i; + + for (i = 0; i < FTRACE_STACK_ENTRIES; i++) { + unsigned long ip = entry->caller[i]; + + if (ip == ULONG_MAX || !ret) + break; + if (i) + ret = trace_seq_puts(s, " <- "); + if (!ip) { + ret = trace_seq_puts(s, "??"); + continue; + } + if (ret /*&& (sym_flags & TRACE_ITER_SYM_ADDR)*/) + ret = trace_seq_printf(s, " <" IP_FMT ">", ip); + } + + return ret; +} + static void print_lat_help_header(struct seq_file *m) { seq_puts(m, "# _------=> CPU# \n"); @@ -1702,6 +1769,16 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) field->line); break; } + case TRACE_USER_STACK: { + struct userstack_entry *field; + + trace_assign_type(field, entry); + + seq_print_userip_objs(field, s, sym_flags); + if (entry->flags & TRACE_FLAG_CONT) + trace_seq_print_cont(s, iter); + break; + } default: trace_seq_printf(s, "Unknown type %d\n", entry->type); } @@ -1853,6 +1930,19 @@ static enum print_line_t print_trace_fmt(struct trace_iterator *iter) field->line); break; } + case TRACE_USER_STACK: { + struct userstack_entry *field; + + trace_assign_type(field, entry); + + ret = seq_print_userip_objs(field, s, sym_flags); + if (!ret) + return TRACE_TYPE_PARTIAL_LINE; + ret = trace_seq_putc(s, '\n'); + if (!ret) + return TRACE_TYPE_PARTIAL_LINE; + break; + } } return TRACE_TYPE_HANDLED; } @@ -1912,6 +2002,7 @@ static enum print_line_t print_raw_fmt(struct trace_iterator *iter) break; } case TRACE_SPECIAL: + case TRACE_USER_STACK: case TRACE_STACK: { struct special_entry *field; @@ -2000,6 +2091,7 @@ static enum print_line_t print_hex_fmt(struct trace_iterator *iter) break; } case TRACE_SPECIAL: + case TRACE_USER_STACK: case TRACE_STACK: { struct special_entry *field; @@ -2054,6 +2146,7 @@ static enum print_line_t print_bin_fmt(struct trace_iterator *iter) break; } case TRACE_SPECIAL: + case TRACE_USER_STACK: case TRACE_STACK: { struct special_entry *field; diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 2cb12fd98f6b..17bb4c830b01 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -26,6 +26,7 @@ enum trace_type { TRACE_BOOT_CALL, TRACE_BOOT_RET, TRACE_FN_RET, + TRACE_USER_STACK, __TRACE_LAST_TYPE }; @@ -42,6 +43,7 @@ struct trace_entry { unsigned char flags; unsigned char preempt_count; int pid; + int tgid; }; /* @@ -99,6 +101,11 @@ struct stack_entry { unsigned long caller[FTRACE_STACK_ENTRIES]; }; +struct userstack_entry { + struct trace_entry ent; + unsigned long caller[FTRACE_STACK_ENTRIES]; +}; + /* * ftrace_printk entry: */ @@ -240,6 +247,7 @@ extern void __ftrace_bad_type(void); IF_ASSIGN(var, ent, struct ctx_switch_entry, 0); \ IF_ASSIGN(var, ent, struct trace_field_cont, TRACE_CONT); \ IF_ASSIGN(var, ent, struct stack_entry, TRACE_STACK); \ + IF_ASSIGN(var, ent, struct userstack_entry, TRACE_USER_STACK);\ IF_ASSIGN(var, ent, struct print_entry, TRACE_PRINT); \ IF_ASSIGN(var, ent, struct special_entry, 0); \ IF_ASSIGN(var, ent, struct trace_mmiotrace_rw, \ @@ -500,6 +508,7 @@ enum trace_iterator_flags { TRACE_ITER_PREEMPTONLY = 0x800, TRACE_ITER_BRANCH = 0x1000, TRACE_ITER_ANNOTATE = 0x2000, + TRACE_ITER_USERSTACKTRACE = 0x4000 }; /* -- cgit v1.2.3 From b54d3de9f3b8956653b06f1a32e9f9321c6d9027 Mon Sep 17 00:00:00 2001 From: Török Edwin Date: Sat, 22 Nov 2008 13:28:48 +0200 Subject: tracing: identify which executable object the userspace address belongs to MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Impact: modify+improve the userstacktrace tracing visualization feature Store thread group leader id, and use it to lookup the address in the process's map. We could have looked up the address on thread's map, but the thread might not exist by the time we are called. The process might not exist either, but if you are reading trace_pipe, that is unlikely. Example usage: mount -t debugfs nodev /sys/kernel/debug cd /sys/kernel/debug/tracing echo userstacktrace >iter_ctrl echo sym-userobj >iter_ctrl echo sched_switch >current_tracer echo 1 >tracing_enabled cat trace_pipe >/tmp/trace& .... run application ... echo 0 >tracing_enabled cat /tmp/trace You'll see stack entries like: /lib/libpthread-2.7.so[+0xd370] You can convert them to function/line using: addr2line -fie /lib/libpthread-2.7.so 0xd370 Or: addr2line -fie /usr/lib/debug/libpthread-2.7.so 0xd370 For non-PIC/PIE executables this won't work: a.out[+0x73b] You need to run the following: addr2line -fie a.out 0x40073b (where 0x400000 is the default load address of a.out) Signed-off-by: Török Edwin Signed-off-by: Ingo Molnar --- Documentation/ftrace.txt | 13 +++++++- kernel/trace/trace.c | 86 ++++++++++++++++++++++++++++++++++++++++++++---- kernel/trace/trace.h | 3 +- 3 files changed, 93 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 79a80f79c062..35a78bc6651d 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -324,7 +324,7 @@ output. To see what is available, simply cat the file: cat /debug/tracing/trace_options print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \ - noblock nostacktrace nosched-tree nouserstacktrace + noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj To disable one of the options, echo in the option prepended with "no". @@ -381,6 +381,17 @@ Here are the available options: userstacktrace - This option changes the trace. It records a stacktrace of the current userspace thread. + sym-userobj - when user stacktrace are enabled, look up which object the + address belongs to, and print a relative address + This is especially useful when ASLR is on, otherwise you don't + get a chance to resolve the address to object/file/line after the app is no + longer running + + The lookup is performed when you read trace,trace_pipe,latency_trace. Example: + + a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0 +x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6] + sched-tree - TBD (any users??) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ced8b4fa9f51..62776b71b1c5 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -276,6 +277,7 @@ static const char *trace_options[] = { "branch", "annotate", "userstacktrace", + "sym-userobj", NULL }; @@ -422,6 +424,28 @@ trace_seq_putmem_hex(struct trace_seq *s, void *mem, size_t len) return trace_seq_putmem(s, hex, j); } +static int +trace_seq_path(struct trace_seq *s, struct path *path) +{ + unsigned char *p; + + if (s->len >= (PAGE_SIZE - 1)) + return 0; + p = d_path(path, s->buffer + s->len, PAGE_SIZE - s->len); + if (!IS_ERR(p)) { + p = mangle_path(s->buffer + s->len, p, "\n"); + if (p) { + s->len = p - s->buffer; + return 1; + } + } else { + s->buffer[s->len++] = '?'; + return 1; + } + + return 0; +} + static void trace_seq_reset(struct trace_seq *s) { @@ -802,6 +826,7 @@ tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags, entry->preempt_count = pc & 0xff; entry->pid = (tsk) ? tsk->pid : 0; + entry->tgid = (tsk) ? tsk->tgid : 0; entry->flags = #ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT (irqs_disabled_flags(flags) ? TRACE_FLAG_IRQS_OFF : 0) | @@ -1429,28 +1454,73 @@ seq_print_ip_sym(struct trace_seq *s, unsigned long ip, unsigned long sym_flags) return ret; } +static inline int seq_print_user_ip(struct trace_seq *s, struct mm_struct *mm, + unsigned long ip, unsigned long sym_flags) +{ + struct file *file = NULL; + unsigned long vmstart = 0; + int ret = 1; + + if (mm) { + const struct vm_area_struct *vma = find_vma(mm, ip); + if (vma) { + file = vma->vm_file; + vmstart = vma->vm_start; + } + } + if (file) { + ret = trace_seq_path(s, &file->f_path); + if (ret) + ret = trace_seq_printf(s, "[+0x%lx]", + ip - vmstart); + } + if (ret && ((sym_flags & TRACE_ITER_SYM_ADDR) || !file)) + ret = trace_seq_printf(s, " <" IP_FMT ">", ip); + return ret; +} + static int seq_print_userip_objs(const struct userstack_entry *entry, struct trace_seq *s, - unsigned long sym_flags) + unsigned long sym_flags) { + struct mm_struct *mm = NULL; int ret = 1; unsigned i; + if (trace_flags & TRACE_ITER_SYM_USEROBJ) { + struct task_struct *task; + /* + * we do the lookup on the thread group leader, + * since individual threads might have already quit! + */ + rcu_read_lock(); + task = find_task_by_vpid(entry->ent.tgid); + rcu_read_unlock(); + + if (task) + mm = get_task_mm(task); + } + for (i = 0; i < FTRACE_STACK_ENTRIES; i++) { unsigned long ip = entry->caller[i]; if (ip == ULONG_MAX || !ret) break; - if (i) + if (i && ret) ret = trace_seq_puts(s, " <- "); if (!ip) { - ret = trace_seq_puts(s, "??"); + if (ret) + ret = trace_seq_puts(s, "??"); continue; } - if (ret /*&& (sym_flags & TRACE_ITER_SYM_ADDR)*/) - ret = trace_seq_printf(s, " <" IP_FMT ">", ip); + if (!ret) + break; + if (ret) + ret = seq_print_user_ip(s, mm, ip, sym_flags); } + if (mm) + mmput(mm); return ret; } @@ -1775,8 +1845,7 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) trace_assign_type(field, entry); seq_print_userip_objs(field, s, sym_flags); - if (entry->flags & TRACE_FLAG_CONT) - trace_seq_print_cont(s, iter); + trace_seq_putc(s, '\n'); break; } default: @@ -3581,6 +3650,9 @@ void ftrace_dump(void) atomic_inc(&global_trace.data[cpu]->disabled); } + /* don't look at user memory in panic mode */ + trace_flags &= ~TRACE_ITER_SYM_USEROBJ; + printk(KERN_TRACE "Dumping ftrace buffer:\n"); iter.tr = &global_trace; diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 17bb4c830b01..28c15c2ebc22 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -508,7 +508,8 @@ enum trace_iterator_flags { TRACE_ITER_PREEMPTONLY = 0x800, TRACE_ITER_BRANCH = 0x1000, TRACE_ITER_ANNOTATE = 0x2000, - TRACE_ITER_USERSTACKTRACE = 0x4000 + TRACE_ITER_USERSTACKTRACE = 0x4000, + TRACE_ITER_SYM_USEROBJ = 0x8000 }; /* -- cgit v1.2.3 From b20a9c24d5c5d466d7e4a25c6f1bedbd2d16ad4f Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Sun, 23 Nov 2008 16:02:31 -0800 Subject: dccp: Set per-connection CCIDs via socket options With this patch, TX/RX CCIDs can now be changed on a per-connection basis, which overrides the defaults set by the global sysctl variables for TX/RX CCIDs. To make full use of this facility, the remaining patches of this patch set are needed, which track dependencies and activate negotiated feature values. Signed-off-by: Gerrit Renker Signed-off-by: David S. Miller --- Documentation/networking/dccp.txt | 14 ++++++++++++++ include/linux/dccp.h | 5 +++++ net/dccp/ackvec.c | 9 ++++----- net/dccp/ackvec.h | 5 ++--- net/dccp/feat.h | 2 ++ net/dccp/proto.c | 34 ++++++++++++++++++++++++++++++++++ 6 files changed, 61 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index 43df4487379b..610083ff73f6 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -61,6 +61,20 @@ DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs supported by the endpoint (see include/linux/dccp.h for symbolic constants). The caller needs to provide a sufficiently large (> 2) array of type uint8_t. +DCCP_SOCKOPT_CCID is write-only and sets both the TX and RX CCIDs at the same +time, combining the operation of the next two socket options. This option is +preferrable over the latter two, since often applications will use the same +type of CCID for both directions; and mixed use of CCIDs is not currently well +understood. This socket option takes as argument at least one uint8_t value, or +an array of uint8_t values, which must match available CCIDS (see above). CCIDs +must be registered on the socket before calling connect() or listen(). + +DCCP_SOCKOPT_TX_CCID is read/write. It returns the current CCID (if set) or sets +the preference list for the TX CCID, using the same format as DCCP_SOCKOPT_CCID. +Please note that the getsockopt argument type here is `int', not uint8_t. + +DCCP_SOCKOPT_RX_CCID is analogous to DCCP_SOCKOPT_TX_CCID, but for the RX CCID. + DCCP_SOCKOPT_SERVER_TIMEWAIT enables the server (listening socket) to hold timewait state when closing the connection (RFC 4340, 8.3). The usual case is that the closing server sends a CloseReq, whereupon the client holds timewait diff --git a/include/linux/dccp.h b/include/linux/dccp.h index eda389ce04f4..6a72ff52a8a4 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -168,6 +168,8 @@ enum { DCCPO_MIN_CCID_SPECIFIC = 128, DCCPO_MAX_CCID_SPECIFIC = 255, }; +/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */ +#define DCCP_SINGLE_OPT_MAXLEN 253 /* DCCP CCIDS */ enum { @@ -203,6 +205,9 @@ enum dccp_feature_numbers { #define DCCP_SOCKOPT_SEND_CSCOV 10 #define DCCP_SOCKOPT_RECV_CSCOV 11 #define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 +#define DCCP_SOCKOPT_CCID 13 +#define DCCP_SOCKOPT_TX_CCID 14 +#define DCCP_SOCKOPT_RX_CCID 15 #define DCCP_SOCKOPT_CCID_RX_INFO 128 #define DCCP_SOCKOPT_CCID_TX_INFO 192 diff --git a/net/dccp/ackvec.c b/net/dccp/ackvec.c index 1e8be246ad15..01e4d39fa232 100644 --- a/net/dccp/ackvec.c +++ b/net/dccp/ackvec.c @@ -12,7 +12,6 @@ #include "ackvec.h" #include "dccp.h" -#include #include #include #include @@ -68,7 +67,7 @@ int dccp_insert_option_ackvec(struct sock *sk, struct sk_buff *skb) struct dccp_sock *dp = dccp_sk(sk); struct dccp_ackvec *av = dp->dccps_hc_rx_ackvec; /* Figure out how many options do we need to represent the ackvec */ - const u16 nr_opts = DIV_ROUND_UP(av->av_vec_len, DCCP_MAX_ACKVEC_OPT_LEN); + const u8 nr_opts = DIV_ROUND_UP(av->av_vec_len, DCCP_SINGLE_OPT_MAXLEN); u16 len = av->av_vec_len + 2 * nr_opts, i; u32 elapsed_time; const unsigned char *tail, *from; @@ -100,8 +99,8 @@ int dccp_insert_option_ackvec(struct sock *sk, struct sk_buff *skb) for (i = 0; i < nr_opts; ++i) { int copylen = len; - if (len > DCCP_MAX_ACKVEC_OPT_LEN) - copylen = DCCP_MAX_ACKVEC_OPT_LEN; + if (len > DCCP_SINGLE_OPT_MAXLEN) + copylen = DCCP_SINGLE_OPT_MAXLEN; *to++ = DCCPO_ACK_VECTOR_0; *to++ = copylen + 2; @@ -432,7 +431,7 @@ found: int dccp_ackvec_parse(struct sock *sk, const struct sk_buff *skb, u64 *ackno, const u8 opt, const u8 *value, const u8 len) { - if (len > DCCP_MAX_ACKVEC_OPT_LEN) + if (len > DCCP_SINGLE_OPT_MAXLEN) return -1; /* dccp_ackvector_print(DCCP_SKB_CB(skb)->dccpd_ack_seq, value, len); */ diff --git a/net/dccp/ackvec.h b/net/dccp/ackvec.h index bcb64fb4acef..4ccee030524e 100644 --- a/net/dccp/ackvec.h +++ b/net/dccp/ackvec.h @@ -11,15 +11,14 @@ * published by the Free Software Foundation. */ +#include #include #include #include #include -/* Read about the ECN nonce to see why it is 253 */ -#define DCCP_MAX_ACKVEC_OPT_LEN 253 /* We can spread an ack vector across multiple options */ -#define DCCP_MAX_ACKVEC_LEN (DCCP_MAX_ACKVEC_OPT_LEN * 2) +#define DCCP_MAX_ACKVEC_LEN (DCCP_SINGLE_OPT_MAXLEN * 2) #define DCCP_ACKVEC_STATE_RECEIVED 0 #define DCCP_ACKVEC_STATE_ECN_MARKED (1 << 6) diff --git a/net/dccp/feat.h b/net/dccp/feat.h index 4d172822df17..093af1610d11 100644 --- a/net/dccp/feat.h +++ b/net/dccp/feat.h @@ -22,6 +22,8 @@ /* Wmin=32 and Wmax=2^46-1 from 7.5.2 */ #define DCCPF_SEQ_WMIN 32 #define DCCPF_SEQ_WMAX 0x3FFFFFFFFFFFull +/* Maximum number of SP values that fit in a single (Confirm) option */ +#define DCCP_FEAT_MAX_SP_VALS (DCCP_SINGLE_OPT_MAXLEN - 2) enum dccp_feat_type { FEAT_AT_RX = 1, /* located at RX side of half-connection */ diff --git a/net/dccp/proto.c b/net/dccp/proto.c index 8b63394ec24c..445884cf1c29 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -501,6 +501,36 @@ static int dccp_setsockopt_cscov(struct sock *sk, int cscov, bool rx) return rc; } +static int dccp_setsockopt_ccid(struct sock *sk, int type, + char __user *optval, int optlen) +{ + u8 *val; + int rc = 0; + + if (optlen < 1 || optlen > DCCP_FEAT_MAX_SP_VALS) + return -EINVAL; + + val = kmalloc(optlen, GFP_KERNEL); + if (val == NULL) + return -ENOMEM; + + if (copy_from_user(val, optval, optlen)) { + kfree(val); + return -EFAULT; + } + + lock_sock(sk); + if (type == DCCP_SOCKOPT_TX_CCID || type == DCCP_SOCKOPT_CCID) + rc = dccp_feat_register_sp(sk, DCCPF_CCID, 1, val, optlen); + + if (!rc && (type == DCCP_SOCKOPT_RX_CCID || type == DCCP_SOCKOPT_CCID)) + rc = dccp_feat_register_sp(sk, DCCPF_CCID, 0, val, optlen); + release_sock(sk); + + kfree(val); + return rc; +} + static int do_dccp_setsockopt(struct sock *sk, int level, int optname, char __user *optval, int optlen) { @@ -515,6 +545,10 @@ static int do_dccp_setsockopt(struct sock *sk, int level, int optname, case DCCP_SOCKOPT_CHANGE_R: DCCP_WARN("sockopt(CHANGE_L/R) is deprecated: fix your app\n"); return 0; + case DCCP_SOCKOPT_CCID: + case DCCP_SOCKOPT_RX_CCID: + case DCCP_SOCKOPT_TX_CCID: + return dccp_setsockopt_ccid(sk, optname, optval, optlen); } if (optlen < (int)sizeof(int)) -- cgit v1.2.3 From ef8ef5fb1027b56f867d4b913cf52bfdc610d2a7 Mon Sep 17 00:00:00 2001 From: Vincent Petry Date: Sun, 23 Nov 2008 11:31:41 +0800 Subject: ALSA: hda: Added an ALC888 model entry for Fujitsu-Siemens Amilo Xa3530 This patch fixes the bug 0004240: ALC888 - Intel HDA - Headphone Controlling. It is made against the 2008-11-23 snapshot. Added Realtek ALC888 model entry for the Fujitsu-Siemens Amilo Xa3530 laptop. It has 4 jacks: HP out, Mic-in, Line-in and Line-out/Side/SPDIF (this one is on the laptop side, the other ones are on the rear). Model detection works. Headphone jack sense works now. Front mic works now, was same as Acer Aspire 4930G. Added channel mode from 2 to 8 channels. In 2ch and 4ch modes, the front is also sent to the Line-out/side jack for convenience instead of just muting the Line-out/side jack like other models do. When using the Mic-in jack as CLFE, the sound is very low (bug?). To work it around, in 6ch mode the CLFE channel is duplicated to the Line-out/side jack because this one has a better amp. Cc: manu@frogged.de Signed-off-by: Vincent Petry Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_realtek.c | 176 ++++++++++++++++++++++-- 2 files changed, 168 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 1b7e36af0f0e..93624e7b4f04 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -919,6 +919,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. mitac Mitac 8252D clevo-m720 Clevo M720 laptop series fujitsu-pi2515 Fujitsu AMILO Pi2515 + fujitsu-xa3530 Fujitsu AMILO XA3530 3stack-6ch-intel Intel DG33* boards auto auto-config reading BIOS (default) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6ec56c62cb18..f52e271edd57 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -230,6 +230,7 @@ enum { ALC883_MITAC, ALC883_CLEVO_M720, ALC883_FUJITSU_PI2515, + ALC888_FUJITSU_XA3530, ALC883_3ST_6ch_INTEL, ALC888_ASUS_M90V, ALC888_ASUS_EEE1601, @@ -1155,6 +1156,141 @@ static void alc_fix_pincfg(struct hda_codec *codec, } } +/* + * ALC888 + */ + +/* + * 2ch mode + */ +static struct hda_verb alc888_4ST_ch2_intel_init[] = { +/* Mic-in jack as mic in */ + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, +/* Line-in jack as Line in */ + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, +/* Line-Out as Front */ + { 0x17, AC_VERB_SET_CONNECT_SEL, 0x00}, + { } /* end */ +}; + +/* + * 4ch mode + */ +static struct hda_verb alc888_4ST_ch4_intel_init[] = { +/* Mic-in jack as mic in */ + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, +/* Line-in jack as Surround */ + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, +/* Line-Out as Front */ + { 0x17, AC_VERB_SET_CONNECT_SEL, 0x00}, + { } /* end */ +}; + +/* + * 6ch mode + */ +static struct hda_verb alc888_4ST_ch6_intel_init[] = { +/* Mic-in jack as CLFE */ + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, +/* Line-in jack as Surround */ + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, +/* Line-Out as CLFE (workaround because Mic-in is not loud enough) */ + { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03}, + { } /* end */ +}; + +/* + * 8ch mode + */ +static struct hda_verb alc888_4ST_ch8_intel_init[] = { +/* Mic-in jack as CLFE */ + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, +/* Line-in jack as Surround */ + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, +/* Line-Out as Side */ + { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03}, + { } /* end */ +}; + +static struct hda_channel_mode alc888_4ST_8ch_intel_modes[4] = { + { 2, alc888_4ST_ch2_intel_init }, + { 4, alc888_4ST_ch4_intel_init }, + { 6, alc888_4ST_ch6_intel_init }, + { 8, alc888_4ST_ch8_intel_init }, +}; + +/* + * ALC888 Fujitsu Siemens Amillo xa3530 + */ + +static struct hda_verb alc888_fujitsu_xa3530_verbs[] = { +/* Front Mic: set to PIN_IN (empty by default) */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, +/* Connect Internal HP to Front */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, +/* Connect Bass HP to Front */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, +/* Connect Line-Out side jack (SPDIF) to Side */ + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x17, AC_VERB_SET_CONNECT_SEL, 0x03}, +/* Connect Mic jack to CLFE */ + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x18, AC_VERB_SET_CONNECT_SEL, 0x02}, +/* Connect Line-in jack to Surround */ + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01}, +/* Connect HP out jack to Front */ + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, +/* Enable unsolicited event for HP jack and Line-out jack */ + {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + {0x17, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + {} +}; + +static void alc888_fujitsu_xa3530_automute(struct hda_codec *codec) +{ + unsigned int present; + unsigned int bits; + /* Line out presence */ + present = snd_hda_codec_read(codec, 0x17, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + /* HP out presence */ + present = present || snd_hda_codec_read(codec, 0x1b, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + bits = present ? HDA_AMP_MUTE : 0; + /* Toggle internal speakers muting */ + snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); + /* Toggle internal bass muting */ + snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); +} + +static void alc888_fujitsu_xa3530_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + if (res >> 26 == ALC880_HP_EVENT) + alc888_fujitsu_xa3530_automute(codec); +} + + /* * ALC888 Acer Aspire 4930G model */ @@ -1164,7 +1300,7 @@ static struct hda_verb alc888_acer_aspire_4930g_verbs[] = { {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Unselect Front Mic by default in input mixer 3 */ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)}, -/* enable unsolicited event fpr HP jack */ +/* Enable unsolicited event for HP jack */ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, /* Connect Internal HP to front */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, @@ -1177,7 +1313,7 @@ static struct hda_verb alc888_acer_aspire_4930g_verbs[] = { { } }; -static struct hda_input_mux alc888_acer_aspire_4930g_capture_source[2] = { +static struct hda_input_mux alc888_2_capture_sources[2] = { /* Front mic only available on one ADC */ { .num_items = 4, @@ -1198,7 +1334,7 @@ static struct hda_input_mux alc888_acer_aspire_4930g_capture_source[2] = { } }; -static struct snd_kcontrol_new alc888_acer_aspire_4930g_mixer[] = { +static struct snd_kcontrol_new alc888_base_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), @@ -1225,11 +1361,12 @@ static struct snd_kcontrol_new alc888_acer_aspire_4930g_mixer[] = { static void alc888_acer_aspire_4930g_automute(struct hda_codec *codec) { unsigned int present; + unsigned int bits; present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - /* Toggle the internal HP PIN (regular muting doesn't work) */ - snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, - (present ? 0x0 : PIN_OUT)); + bits = present ? HDA_AMP_MUTE : 0; + snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); } static void alc888_acer_aspire_4930g_unsol_event(struct hda_codec *codec, @@ -8286,6 +8423,7 @@ static const char *alc883_models[ALC883_MODEL_LAST] = { [ALC883_MITAC] = "mitac", [ALC883_CLEVO_M720] = "clevo-m720", [ALC883_FUJITSU_PI2515] = "fujitsu-pi2515", + [ALC888_FUJITSU_XA3530] = "fujitsu-xa3530", [ALC883_3ST_6ch_INTEL] = "3stack-6ch-intel", [ALC1200_ASUS_P5Q] = "asus-p5q", [ALC883_AUTO] = "auto", @@ -8346,6 +8484,8 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch), SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION), SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515", ALC883_FUJITSU_PI2515), + SND_PCI_QUIRK(0x1734, 0x113d, "Fujitsu AMILO Xa3530", + ALC888_FUJITSU_XA3530), SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch), SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763), SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763), @@ -8472,7 +8612,7 @@ static struct alc_config_preset alc883_presets[] = { .init_hook = alc883_acer_aspire_automute, }, [ALC888_ACER_ASPIRE_4930G] = { - .mixers = { alc888_acer_aspire_4930g_mixer, + .mixers = { alc888_base_mixer, alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs, alc888_acer_aspire_4930g_verbs }, @@ -8486,8 +8626,8 @@ static struct alc_config_preset alc883_presets[] = { .channel_mode = alc883_3ST_6ch_modes, .need_dac_fix = 1, .num_mux_defs = - ARRAY_SIZE(alc888_acer_aspire_4930g_capture_source), - .input_mux = alc888_acer_aspire_4930g_capture_source, + ARRAY_SIZE(alc888_2_capture_sources), + .input_mux = alc888_2_capture_sources, .unsol_event = alc888_acer_aspire_4930g_unsol_event, .init_hook = alc888_acer_aspire_4930g_automute, }, @@ -8634,6 +8774,24 @@ static struct alc_config_preset alc883_presets[] = { .unsol_event = alc883_2ch_fujitsu_pi2515_unsol_event, .init_hook = alc883_2ch_fujitsu_pi2515_automute, }, + [ALC888_FUJITSU_XA3530] = { + .mixers = { alc888_base_mixer, alc883_chmode_mixer }, + .init_verbs = { alc883_init_verbs, + alc888_fujitsu_xa3530_verbs }, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev), + .adc_nids = alc883_adc_nids_rev, + .capsrc_nids = alc883_capsrc_nids_rev, + .dig_out_nid = ALC883_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc888_4ST_8ch_intel_modes), + .channel_mode = alc888_4ST_8ch_intel_modes, + .num_mux_defs = + ARRAY_SIZE(alc888_2_capture_sources), + .input_mux = alc888_2_capture_sources, + .unsol_event = alc888_fujitsu_xa3530_unsol_event, + .init_hook = alc888_fujitsu_xa3530_automute, + }, [ALC888_LENOVO_SKY] = { .mixers = { alc888_lenovo_sky_mixer, alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs, alc888_lenovo_sky_verbs}, -- cgit v1.2.3 From df4fc31558dd2a3a30292ddb3a64c2a5befcec73 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 26 Nov 2008 00:16:23 -0500 Subject: ftrace: add function tracing to single thread Impact: feature to function trace a single thread This patch adds the ability to function trace a single thread. The file: /debugfs/tracing/set_ftrace_pid contains the pid to trace. Valid pids are any positive integer. Writing any negative number to this file will disable the pid tracing and the function tracer will go back to tracing all of threads. This feature works with both static and dynamic function tracing. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- Documentation/ftrace.txt | 79 ++++++++++++++++++ kernel/trace/ftrace.c | 209 +++++++++++++++++++++++++++++++++++++++++------ 2 files changed, 262 insertions(+), 26 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 35a78bc6651d..de05042f11b9 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -127,6 +127,8 @@ of ftrace. Here is a list of some of the key files: be traced. If a function exists in both set_ftrace_filter and set_ftrace_notrace, the function will _not_ be traced. + set_ftrace_pid: Have the function tracer only trace a single thread. + available_filter_functions: This lists the functions that ftrace has processed and can trace. These are the function names that you can pass to "set_ftrace_filter" or @@ -1073,6 +1075,83 @@ For simple one time traces, the above is sufficent. For anything else, a search through /proc/mounts may be needed to find where the debugfs file-system is mounted. + +Single thread tracing +--------------------- + +By writing into /debug/tracing/set_ftrace_pid you can trace a +single thread. For example: + +# cat /debug/tracing/set_ftrace_pid +no pid +# echo 3111 > /debug/tracing/set_ftrace_pid +# cat /debug/tracing/set_ftrace_pid +3111 +# echo function > /debug/tracing/current_tracer +# cat /debug/tracing/trace | head + # tracer: function + # + # TASK-PID CPU# TIMESTAMP FUNCTION + # | | | | | + yum-updatesd-3111 [003] 1637.254676: finish_task_switch <-thread_return + yum-updatesd-3111 [003] 1637.254681: hrtimer_cancel <-schedule_hrtimeout_range + yum-updatesd-3111 [003] 1637.254682: hrtimer_try_to_cancel <-hrtimer_cancel + yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel + yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll + yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll +# echo -1 > /debug/tracing/set_ftrace_pid +# cat /debug/tracing/trace |head + # tracer: function + # + # TASK-PID CPU# TIMESTAMP FUNCTION + # | | | | | + ##### CPU 3 buffer started #### + yum-updatesd-3111 [003] 1701.957688: free_poll_entry <-poll_freewait + yum-updatesd-3111 [003] 1701.957689: remove_wait_queue <-free_poll_entry + yum-updatesd-3111 [003] 1701.957691: fput <-free_poll_entry + yum-updatesd-3111 [003] 1701.957692: audit_syscall_exit <-sysret_audit + yum-updatesd-3111 [003] 1701.957693: path_put <-audit_syscall_exit + +If you want to trace a function when executing, you could use +something like this simple program: + +#include +#include +#include +#include +#include +#include + +int main (int argc, char **argv) +{ + if (argc < 1) + exit(-1); + + if (fork() > 0) { + int fd, ffd; + char line[64]; + int s; + + ffd = open("/debug/tracing/current_tracer", O_WRONLY); + if (ffd < 0) + exit(-1); + write(ffd, "nop", 3); + + fd = open("/debug/tracing/set_ftrace_pid", O_WRONLY); + s = sprintf(line, "%d\n", getpid()); + write(fd, line, s); + + write(ffd, "function", 8); + + close(fd); + close(ffd); + + execvp(argv[1], argv+1); + } + + return 0; +} + dynamic ftrace -------------- diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 7e2d3b91692d..00d98c65fad0 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -47,6 +47,9 @@ int ftrace_enabled __read_mostly; static int last_ftrace_enabled; +/* ftrace_pid_trace >= 0 will only trace threads with this pid */ +static int ftrace_pid_trace = -1; + /* Quick disabling of function tracer. */ int function_trace_stop; @@ -61,6 +64,7 @@ static int ftrace_disabled __read_mostly; static DEFINE_SPINLOCK(ftrace_lock); static DEFINE_MUTEX(ftrace_sysctl_lock); +static DEFINE_MUTEX(ftrace_start_lock); static struct ftrace_ops ftrace_list_end __read_mostly = { @@ -70,6 +74,7 @@ static struct ftrace_ops ftrace_list_end __read_mostly = static struct ftrace_ops *ftrace_list __read_mostly = &ftrace_list_end; ftrace_func_t ftrace_trace_function __read_mostly = ftrace_stub; ftrace_func_t __ftrace_trace_function __read_mostly = ftrace_stub; +ftrace_func_t ftrace_pid_function __read_mostly = ftrace_stub; static void ftrace_list_func(unsigned long ip, unsigned long parent_ip) { @@ -86,6 +91,21 @@ static void ftrace_list_func(unsigned long ip, unsigned long parent_ip) }; } +static void ftrace_pid_func(unsigned long ip, unsigned long parent_ip) +{ + if (current->pid != ftrace_pid_trace) + return; + + ftrace_pid_function(ip, parent_ip); +} + +static void set_ftrace_pid_function(ftrace_func_t func) +{ + /* do not set ftrace_pid_function to itself! */ + if (func != ftrace_pid_func) + ftrace_pid_function = func; +} + /** * clear_ftrace_function - reset the ftrace function * @@ -96,6 +116,7 @@ void clear_ftrace_function(void) { ftrace_trace_function = ftrace_stub; __ftrace_trace_function = ftrace_stub; + ftrace_pid_function = ftrace_stub; } #ifndef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST @@ -128,20 +149,26 @@ static int __register_ftrace_function(struct ftrace_ops *ops) ftrace_list = ops; if (ftrace_enabled) { + ftrace_func_t func; + + if (ops->next == &ftrace_list_end) + func = ops->func; + else + func = ftrace_list_func; + + if (ftrace_pid_trace >= 0) { + set_ftrace_pid_function(func); + func = ftrace_pid_func; + } + /* * For one func, simply call it directly. * For more than one func, call the chain. */ #ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST - if (ops->next == &ftrace_list_end) - ftrace_trace_function = ops->func; - else - ftrace_trace_function = ftrace_list_func; + ftrace_trace_function = func; #else - if (ops->next == &ftrace_list_end) - __ftrace_trace_function = ops->func; - else - __ftrace_trace_function = ftrace_list_func; + __ftrace_trace_function = func; ftrace_trace_function = ftrace_test_stop_func; #endif } @@ -182,8 +209,19 @@ static int __unregister_ftrace_function(struct ftrace_ops *ops) if (ftrace_enabled) { /* If we only have one func left, then call that directly */ - if (ftrace_list->next == &ftrace_list_end) - ftrace_trace_function = ftrace_list->func; + if (ftrace_list->next == &ftrace_list_end) { + ftrace_func_t func = ftrace_list->func; + + if (ftrace_pid_trace >= 0) { + set_ftrace_pid_function(func); + func = ftrace_pid_func; + } +#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST + ftrace_trace_function = func; +#else + __ftrace_trace_function = func; +#endif + } } out: @@ -192,6 +230,38 @@ static int __unregister_ftrace_function(struct ftrace_ops *ops) return ret; } +static void ftrace_update_pid_func(void) +{ + ftrace_func_t func; + + /* should not be called from interrupt context */ + spin_lock(&ftrace_lock); + + if (ftrace_trace_function == ftrace_stub) + goto out; + + func = ftrace_trace_function; + + if (ftrace_pid_trace >= 0) { + set_ftrace_pid_function(func); + func = ftrace_pid_func; + } else { + if (func != ftrace_pid_func) + goto out; + + set_ftrace_pid_function(func); + } + +#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST + ftrace_trace_function = func; +#else + __ftrace_trace_function = func; +#endif + + out: + spin_unlock(&ftrace_lock); +} + #ifdef CONFIG_DYNAMIC_FTRACE #ifndef CONFIG_FTRACE_MCOUNT_RECORD # error Dynamic ftrace depends on MCOUNT_RECORD @@ -545,7 +615,19 @@ static void ftrace_run_update_code(int command) static ftrace_func_t saved_ftrace_func; static int ftrace_start_up; -static DEFINE_MUTEX(ftrace_start_lock); + +static void ftrace_startup_enable(int command) +{ + if (saved_ftrace_func != ftrace_trace_function) { + saved_ftrace_func = ftrace_trace_function; + command |= FTRACE_UPDATE_TRACE_FUNC; + } + + if (!command || !ftrace_enabled) + return; + + ftrace_run_update_code(command); +} static void ftrace_startup(void) { @@ -558,16 +640,8 @@ static void ftrace_startup(void) ftrace_start_up++; command |= FTRACE_ENABLE_CALLS; - if (saved_ftrace_func != ftrace_trace_function) { - saved_ftrace_func = ftrace_trace_function; - command |= FTRACE_UPDATE_TRACE_FUNC; - } - - if (!command || !ftrace_enabled) - goto out; + ftrace_startup_enable(command); - ftrace_run_update_code(command); - out: mutex_unlock(&ftrace_start_lock); } @@ -1262,13 +1336,10 @@ static struct file_operations ftrace_notrace_fops = { .release = ftrace_notrace_release, }; -static __init int ftrace_init_debugfs(void) +static __init int ftrace_init_dyn_debugfs(struct dentry *d_tracer) { - struct dentry *d_tracer; struct dentry *entry; - d_tracer = tracing_init_dentry(); - entry = debugfs_create_file("available_filter_functions", 0444, d_tracer, NULL, &ftrace_avail_fops); if (!entry) @@ -1295,8 +1366,6 @@ static __init int ftrace_init_debugfs(void) return 0; } -fs_initcall(ftrace_init_debugfs); - static int ftrace_convert_nops(struct module *mod, unsigned long *start, unsigned long *end) @@ -1382,12 +1451,100 @@ static int __init ftrace_nodyn_init(void) } device_initcall(ftrace_nodyn_init); +static inline int ftrace_init_dyn_debugfs(struct dentry *d_tracer) { return 0; } +static inline void ftrace_startup_enable(int command) { } # define ftrace_startup() do { } while (0) # define ftrace_shutdown() do { } while (0) # define ftrace_startup_sysctl() do { } while (0) # define ftrace_shutdown_sysctl() do { } while (0) #endif /* CONFIG_DYNAMIC_FTRACE */ +static ssize_t +ftrace_pid_read(struct file *file, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char buf[64]; + int r; + + if (ftrace_pid_trace >= 0) + r = sprintf(buf, "%u\n", ftrace_pid_trace); + else + r = sprintf(buf, "no pid\n"); + + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); +} + +static ssize_t +ftrace_pid_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char buf[64]; + long val; + int ret; + + if (cnt >= sizeof(buf)) + return -EINVAL; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + ret = strict_strtol(buf, 10, &val); + if (ret < 0) + return ret; + + mutex_lock(&ftrace_start_lock); + if (ret < 0) { + /* disable pid tracing */ + if (ftrace_pid_trace < 0) + goto out; + ftrace_pid_trace = -1; + + } else { + + if (ftrace_pid_trace == val) + goto out; + + ftrace_pid_trace = val; + } + + /* update the function call */ + ftrace_update_pid_func(); + ftrace_startup_enable(0); + + out: + mutex_unlock(&ftrace_start_lock); + + return cnt; +} + +static struct file_operations ftrace_pid_fops = { + .read = ftrace_pid_read, + .write = ftrace_pid_write, +}; + +static __init int ftrace_init_debugfs(void) +{ + struct dentry *d_tracer; + struct dentry *entry; + + d_tracer = tracing_init_dentry(); + if (!d_tracer) + return 0; + + ftrace_init_dyn_debugfs(d_tracer); + + entry = debugfs_create_file("set_ftrace_pid", 0644, d_tracer, + NULL, &ftrace_pid_fops); + if (!entry) + pr_warning("Could not create debugfs " + "'set_ftrace_pid' entry\n"); + return 0; +} + +fs_initcall(ftrace_init_debugfs); + /** * ftrace_kill - kill ftrace * -- cgit v1.2.3 From c072c24975ec4f0ccfcb6f5c8a8040b6eb75ef8f Mon Sep 17 00:00:00 2001 From: walimis Date: Fri, 28 Nov 2008 12:21:19 +0800 Subject: ftrace: improve documentation Impact: extend documentation with notice of using wild cards correctly We know that we can use wild cards to set set_ftrace_filter, but there's problem when using them naively such as: echo h* > /debug/tracing/set_ftrace_filter If there are files named with "h" prefix in current directory, echo "h*" will echo these filenames to set_ftrace_filter, not the intended "h*". For example: $ cat /debug/tracing/available_filter_functions |grep ^hr |wc -l 23 $ ls $ touch hraa hrdd $ ls hraa hrdd $ echo hr* > /debug/tracing/set_ftrace_filter $ cat /debug/tracing/set_ftrace_filter No output in /debug/tracing/set_ftrace_filter! If we use '' to escape wild cards, it works: $ ls hraa hrdd $ echo "hr*" > /debug/tracing/set_ftrace_filter $ cat /debug/tracing/set_ftrace_filter |wc -l 23 This problem can lead to unexpected result if current directory has a lot of files. Signed-off-by: walimis Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar --- Documentation/ftrace.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index de05042f11b9..803b1318b13d 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -1251,7 +1251,11 @@ These are the only wild cards which are supported. * will not work. - # echo hrtimer_* > /debug/tracing/set_ftrace_filter +Note: It is better to use quotes to enclose the wild cards, otherwise + the shell may expand the parameters into names of files in the local + directory. + + # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter Produces: @@ -1306,7 +1310,7 @@ Again, now we want to append. # echo sys_nanosleep > /debug/tracing/set_ftrace_filter # cat /debug/tracing/set_ftrace_filter sys_nanosleep - # echo hrtimer_* >> /debug/tracing/set_ftrace_filter + # echo 'hrtimer_*' >> /debug/tracing/set_ftrace_filter # cat /debug/tracing/set_ftrace_filter hrtimer_run_queues hrtimer_run_pending -- cgit v1.2.3 From de04b102bfc9a13e96f0892305b394077ffb6514 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 26 Nov 2008 10:37:23 +0100 Subject: ALSA: oxygen: add Claro halo support Add support for the HT-Omega Claro halo (XT). Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 3 ++- sound/pci/Kconfig | 3 ++- sound/pci/oxygen/oxygen.c | 4 ++++ 3 files changed, 8 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index e0e54a27fc10..0cca842a6631 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1647,7 +1647,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. * AuzenTech X-Meridian * Bgears b-Enspirer * Club3D Theatron DTS - * HT-Omega Claro + * HT-Omega Claro (plus) + * HT-Omega Claro halo (XT) * Razer Barracuda AC-1 * Sondigo Inferno diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 7003711f4fcc..611df4b72831 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -208,7 +208,8 @@ config SND_OXYGEN * AuzenTech X-Meridian * Bgears b-Enspirer * Club3D Theatron DTS - * HT-Omega Claro + * HT-Omega Claro (plus) + * HT-Omega Claro halo (XT) * Razer Barracuda AC-1 * Sondigo Inferno diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c index b60f6212745a..de999c6d6dd3 100644 --- a/sound/pci/oxygen/oxygen.c +++ b/sound/pci/oxygen/oxygen.c @@ -61,6 +61,7 @@ MODULE_PARM_DESC(enable, "enable card"); enum { MODEL_CMEDIA_REF, /* C-Media's reference design */ MODEL_MERIDIAN, /* AuzenTech X-Meridian */ + MODEL_HALO, /* HT-Omega Claro halo */ }; static struct pci_device_id oxygen_ids[] __devinitdata = { @@ -74,6 +75,7 @@ static struct pci_device_id oxygen_ids[] __devinitdata = { { OXYGEN_PCI_SUBID(0x1a58, 0x0910), .driver_data = MODEL_CMEDIA_REF }, { OXYGEN_PCI_SUBID(0x415a, 0x5431), .driver_data = MODEL_MERIDIAN }, { OXYGEN_PCI_SUBID(0x7284, 0x9761), .driver_data = MODEL_CMEDIA_REF }, + { OXYGEN_PCI_SUBID(0x7284, 0x9781), .driver_data = MODEL_HALO }, { } }; MODULE_DEVICE_TABLE(pci, oxygen_ids); @@ -301,6 +303,8 @@ static int generic_probe(struct oxygen *chip, unsigned long driver_data) PLAYBACK_1_TO_SPDIF | CAPTURE_0_FROM_I2S_2 | CAPTURE_1_FROM_SPDIF; + } + if (driver_data == MODEL_MERIDIAN || driver_data == MODEL_HALO) { chip->model.misc_flags = OXYGEN_MISC_MIDI; chip->model.device_config |= MIDI_OUTPUT | MIDI_INPUT; } -- cgit v1.2.3 From a838c2ec6ea1f18431da74dfe4978c57355b95f3 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Thu, 27 Nov 2008 16:14:44 +0800 Subject: markers: comment marker_synchronize_unregister() on data dependency Add document and comments on marker_synchronize_unregister(): it should be called before freeing resources that the probes depend on. Based on comments from Lai Jiangshan and Mathieu Desnoyers. Signed-off-by: Wu Fengguang Reviewed-by: Mathieu Desnoyers Reviewed-by: Lai Jiangshan Signed-off-by: Ingo Molnar --- Documentation/markers.txt | 15 ++++++++++----- include/linux/marker.h | 6 ++++-- 2 files changed, 14 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/markers.txt b/Documentation/markers.txt index 6d275e4ef385..d2b3d0e91b26 100644 --- a/Documentation/markers.txt +++ b/Documentation/markers.txt @@ -51,11 +51,16 @@ to call) for the specific marker through marker_probe_register() and can be activated by calling marker_arm(). Marker deactivation can be done by calling marker_disarm() as many times as marker_arm() has been called. Removing a probe is done through marker_probe_unregister(); it will disarm the probe. -marker_synchronize_unregister() must be called before the end of the module exit -function to make sure there is no caller left using the probe. This, and the -fact that preemption is disabled around the probe call, make sure that probe -removal and module unload are safe. See the "Probe example" section below for a -sample probe module. + +marker_synchronize_unregister() must be called between probe unregistration and +the first occurrence of +- the end of module exit function, + to make sure there is no caller left using the probe; +- the free of any resource used by the probes, + to make sure the probes wont be accessing invalid data. +This, and the fact that preemption is disabled around the probe call, make sure +that probe removal and module unload are safe. See the "Probe example" section +below for a sample probe module. The marker mechanism supports inserting multiple instances of the same marker. Markers can be put in inline functions, inlined static functions, and diff --git a/include/linux/marker.h b/include/linux/marker.h index 34c14bc957f5..b85e74ca782f 100644 --- a/include/linux/marker.h +++ b/include/linux/marker.h @@ -211,8 +211,10 @@ extern void *marker_get_private_data(const char *name, marker_probe_func *probe, /* * marker_synchronize_unregister must be called between the last marker probe - * unregistration and the end of module exit to make sure there is no caller - * executing a probe when it is freed. + * unregistration and the first one of + * - the end of module exit function + * - the free of any resource used by the probes + * to ensure the code and data are valid for any possibly running probes. */ #define marker_synchronize_unregister() synchronize_sched() -- cgit v1.2.3 From f08340c5d68ab621f377c108637e2d8e95b3e5d4 Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Sat, 29 Nov 2008 15:43:32 +0530 Subject: tracepoints: Documentation TPPROTO misspelt in Documentation/tracepoints.txt Impact: fix typo in documentation TPPROTO is misspelt in Documentation/tracepoints.txt Kept me wondering what was wrong, when I was trying to add a new tracepoint subsystem. Signed-off-by: Nikanth Karthikesan Signed-off-by: Ingo Molnar --- Documentation/tracepoints.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/tracepoints.txt b/Documentation/tracepoints.txt index 2d42241a25c3..6f0a044f5b5e 100644 --- a/Documentation/tracepoints.txt +++ b/Documentation/tracepoints.txt @@ -45,7 +45,7 @@ In include/trace/subsys.h : #include DECLARE_TRACE(subsys_eventname, - TPPTOTO(int firstarg, struct task_struct *p), + TPPROTO(int firstarg, struct task_struct *p), TPARGS(firstarg, p)); In subsys/file.c (where the tracing statement must be added) : @@ -66,7 +66,7 @@ Where : - subsys is the name of your subsystem. - eventname is the name of the event to trace. -- TPPTOTO(int firstarg, struct task_struct *p) is the prototype of the +- TPPROTO(int firstarg, struct task_struct *p) is the prototype of the function called by this tracepoint. - TPARGS(firstarg, p) are the parameters names, same as found in the -- cgit v1.2.3 From a7fe49bf01dd64b3c73ad0e172f68bd03c813d65 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 3 Dec 2008 18:26:35 +0100 Subject: ALSA: Add more documentation about HD-audio driver The file can be converted to PDF via asciidoc. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 535 ++++++++++++++++++++++++++++++++++ 1 file changed, 535 insertions(+) create mode 100644 Documentation/sound/alsa/HD-Audio.txt (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt new file mode 100644 index 000000000000..e758f24017bf --- /dev/null +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -0,0 +1,535 @@ +MORE NOTES ON HD-AUDIO DRIVER +============================= + Takashi Iwai + + +GENERAL +------- + +HD-audio is the new standard on-board audio component on modern PCs +after AC97. Although Linux has been supporting HD-audio since long +time ago, there are often problems with new machines. A part of the +problem is broken BIOS, and rest is the driver implementation. This +document explains the trouble-shooting and debugging methods for the +HD-audio hardware. + +The HD-audio component consists of two parts: the controller chip and +the codec chips on the HD-audio bus. Linux provides a single driver +for all controllers, snd-hda-intel. Since the HD-audio controllers +are supposed to be compatible, the single snd-hda-driver should work +in most cases. But, not surprisingly, there are known bugs and issues +specific to each controller type. The snd-hda-intel driver has a +bunch of workarounds for these as described below. + +A controller may have multiple codecs. Usually you have one audio +codec and optionally one modem codec. In some cases, there can be +multiple audio codecs, e.g. for analog and digital outputs, but the +driver might not work properly. + +The snd-hda-intel driver has several different codec parsers depending +on the codec. It has a generic parser as a fallback, but this +functionality is fairly limited until now. Instead of the generic +parser, usually the codec-specific parser (coded in patch_*.c) is used +for the codec-specific implementations. The details about the +codec-specific problems are explained in the later sections. + +If you are interested in the deep debugging of HD-audio, read the +HD-audio specification at first. The specification is found on +Intel's web page, for example: + +- http://www.intel.com/standards/hdaudio/ + + +HD-AUDIO CONTROLLER +------------------- + +DMA-Position Problem +~~~~~~~~~~~~~~~~~~~~ +The most common problem of the controller is the inaccurate DMA +pointer reporting. The DMA pointer for playback and capture can be +read in two ways, either via a LPIB register or via a position-buffer +map. As default the driver tries to reads from the io-mapped +position-buffer, and falls back to LPIB if it appears unupdated. +However, this detection isn't perfect on some devices. In such a +case, you can change the default method via `position_fix` option. + +`position_fix=1` means to use LPIB method explicitly. +`position_fix=2` means to use the position-buffer. 0 is the default +value, the automatic check. If you get a problem of repeated sounds, +this option might help. + +In addition to that, every controller is known to be broken regarding +the wake-up timing. It wakes up a few samples before actually +processing the data on the buffer. This caused a lot of problems, for +example, with ALSA dmix or JACK. Since 2.6.27 kernel, the driver puts +an artificial delay to the wake up timing. This delay is controlled +via `bdl_pos_adj` option. + +When `bdl_pos_adj` is a negative value (as default), it's assigned to +an appropriate value depending on the controller chip. For Intel +chip, it'd be 1 while it'd be 32 for others. Usually this works. +Only in case it doesn't work and you get warning messages, you should +change to other values. + + +Codec-Probing Problem +~~~~~~~~~~~~~~~~~~~~~ +A less often but a more severe problem is the codec probing. When +BIOS reports the available codec slots wrongly, the driver gets +confused and tries to access the non-existing codec slot. This often +results in the total screw-up, and destruct the further communication +with the codec chips. The symptom appears usually as the error +message like: +------------------------------------------------------------------------ + hda_intel: azx_get_response timeout, switching to polling mode: \ + last cmd=0x12345678 + hda_intel: azx_get_response timeout, switching to single_cmd mode: \ + last cmd=0x12345678 +------------------------------------------------------------------------ + +The first line is a warning, and this is usually relatively harmless. +It means that the codec response isn't notified via an IRQ. The +driver uses explicit polling method to read the response. It gives +very slight CPU overhead, but you'd unlikely notice it. + +The second line is, however, a fatal error. If this happens, usually +it means that something is really wrong. Most likely you are +accessing a non-existing codec slot. + +Thus, if the second error message appears, try to narrow the probed +codec slots via `probe_mask` option. It's a bitmask, and each bit +corresponding to the codec slot. For example, to probe only the +first slot, pass `probe_mask=1`. For the first and the third slots, +pass `probe_mask=5` (where 5 = 1 | 4), and so on. + +Since 2.6.29 kernel, the driver has a more robust probing method, so +this error might happen rarely, though. + + +Interrupt Handling +~~~~~~~~~~~~~~~~~~ +In rare but some cases, the interrupt isn't properly handled as +default. You would notice this by the DMA transfer error reported by +ALSA PCM core, for example. Using MSI might help in such a case. +Pass `enable_msi=1` option for enabling MSI. + + +HD-AUDIO CODEC +-------------- + +Model Option +~~~~~~~~~~~~ +The most common problems with the HD-audio driver is the unsupported +codec features or the mismatched device configuration. Most of +codec-specific code has several preset models, either to override the +BIOS setup or to provide more comprehensive features. + +The driver checks PCI SSID and looks through the static configuration +table until any matching entry is found. If you have a new machine, +you may see a message like below: +------------------------------------------------------------------------ + hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... +------------------------------------------------------------------------ +Even if you such a message, DON'T PANIC. Take a deep breath (and keep +your towel). First of all, it's an informational message, no warning, +no error. This means that the PCI SSID of your device isn't listed in +the known preset model list. But, this doesn't mean that the driver +is broken. Many codec-driver provides the automatic configuration +based on the BIOS setup. + +The HD-audio codec has usually "pin" widgets, and BIOS sets the default +configuration of each pin, which indicates the location, the +connection type, the jack color, etc. The HD-audio driver can guess +the right connection judging from these default configuration values. +However -- some codec support codes, such as patch_analog.c, don't +support the automatic probing (yet as of 2.6.28). And, BIOS is often, +yes, pretty often broken. It sets up wrong values and screws up the +driver. + +The preset model is provided basically to override such a situation. +When the matching preset model is found in the list, the driver +assumes the static configuration of that preset and builds the mixer +and PCM based on the static information. Thus, if you have a newer +machine with a slightly different PCI SSID from the existing one, you +may have a good chance to re-use the same model. You can pass the +`model` option to specify the preset model instead of PCI SSID +look-up. + +What `model` option values are available depends on the codec chip. +Check your codec chip from the codec proc file (see "Codec Proc-File" +section below). It will show the vendor/product name of your codec +chip. Then, see Documentation/sound/alsa/ALSA-Configuration.txt file. +In the section of HD-audio driver, you can find a list of codecs and +`model` options belonging to each codec. For example, for Realtek +ALC262 codec chip, pass `model=ultra` for devices that are compatible +with Samsung Q1 Ultra. + +Thus, the first thing you can do for any brand-new, unsupported +HD-audio hardware is to check HD-audio codec and several different +`model` option values. If you have a luck, some of them might suit +with your device well. + +Some codecs such as ALC880 have a special model option `model=test`. +This configures the driver to provide as many mixer controls as +possible for every single pin feature except for the unsolicited +events (and maybe some other specials). Adjust each mixer element and +try the I/O in the way of trial-and-error until figuring out the whole +I/O pin mappings. + +Note that `model=generic` has a special meaning. It means to use the +generic parser regardless of the codec. Usually the codec-specific +parser is much better than the generic parser (as now). Thus this +option is more about the debugging purpose. + + +Speaker and Headphone Output +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +One of the most frequent (and obvious) bugs with HD-audio is the +silent output from either or both of a built-in speaker and a +headphone jack. In general, you should try a headphone output at +first. A speaker output often requires more additional controls like +the amplifier. Thus a headphone output has a slightly better chance. + +Before making a bug report, double-check whether the mixer is set up +correctly. The recent version of snd-hda-intel driver provides mostly +"Master" volume control as well as "Front" volume. In addition, there +are individual "Headphone" and "Speaker" controls. + +Ditto for the speaker output. There can be "External Amplifier" +switch on some codecs. Turn on this if present. + +Another related problem is the automatic mute of speaker output by +headphone plugging. This feature is implemented in most cases, but +not on every preset model or codec-support code. + +In anyway, try a different model option if you have such a problem. +Some other models may match better and give you more matching +functionality. If none of the available models works, send a bug +report. See the bug report section for details. + +If you are masochistic enough to debug the driver problem, note the +following: + +- The speaker (and the headphone, too) output often requires the + external amplifier. This can be set usually via EAPD verb or a + certain GPIO. If the codec pin supports EAPD, you have a better + chance via SET_EAPD_BTL verb (0x70c). On others, GPIO pin (mostly + it's either GPIO0 or GPIO1) can turn on/off EAPD. +- Some Realtek codecs require special vendor-specific coefficients to + turn on the amplifier. See patch_realtek.c. +- IDT codecs may have extra power-enable/disable controls on each + analog pin. See patch_sigmatel.c. +- Very rare but some devices don't accept the pin-detection verb until + triggered. Issuing GET_PIN_SENSE verb (0xf09) may result in the + codec-communication stall. Some examples are found in + patch_realtek.c. + + +Capture Problems +~~~~~~~~~~~~~~~~ +The capture problems are often missing setups of mixers. Thus, before +submitting a bug report, make sure that you set up the mixer +correctly. For example, both "Capture Volume" and "Capture Switch" +have to be set properly in addition to the right "Capture Source" or +"Input Source" selection. Some devices have "Mic Boost" volume or +switch. + +When the PCM device is opened via "default" PCM (without pulse-audio +plugin), you'll likely have "Digital Capture Volume" control as well. +This is provided for the extra gain/attenuation of the signal in +software, especially for the inputs without the hardware volume +control such as digital microphones. Unless really needed, this +should be set to exactly 50%, corresponding to 0dB. When you use "hw" +PCM, i.e., a raw access PCM, this control will have no influence, +though. + +It's known that some codecs / devices have fairly bad analog circuits, +and the recorded sound contains a certain DC-offset. This is no bug +of the driver. + +Most of modern laptops have no analog CD-input connection. Thus, the +recording from CD input won't work in many cases although the driver +provides it as the capture source. + +The automatic switching of the built-in and external mic per plugging +is implemented on some codec models but not on every model. Partly +because of my laziness but mostly lack of testers. Feel free to +submit the improvement patch to the author. + + +Direct Debugging +~~~~~~~~~~~~~~~~ +If no model option gives you a better result, and you are a touch guy +to fight again the evil, try debugging via hitting the raw HD-audio +codec verbs to the device. Some tools are available: hda-emu and +hda-analyzer. The detailed description is found in the sections +below. You'd need to enable hwdep for using these tools. See "Kernel +Configuration". + + +OTHER ISSUES +------------ + +Kernel Configuration +~~~~~~~~~~~~~~~~~~~~ +In general, I recommend you to enable the sound debug option, +`CONFIG_SND_DEBUG=y`, no matter whether you are debugging or not. +This enables snd_printd() macro and others, and you'll get additional +kernel messages at probing. + +In addition, you can enable `CONFIG_SND_DEBUG_VERBOSE=y`. But this +will give you far more messages. Thus turn this on only when you are +sure to want it. + +Don't forget to turn on the appropriate `CONFIG_SND_HDA_CODEC_*` +options. Note that each of them corresponds to the codec chip, not +the controller chip. Thus, even if lspci shows the Nvidia controller, +you may choose the option for other vendors. If you are unsure, just +choose all yes. + +`CONFIG_SND_HDA_HWDEP` is a useful option for debugging the driver. +When this is enabled, the driver creates hardware-dependent devices +(one per each codec), and you have a raw access to the device via +hda-verb program. For example, `hwC0D2` will be created for the card +0 codec slot #2. For debug tools such as hda-verb and hda-analyzer, +the hwdep device has to be enabled. Thus, turn this on always. + +`CONFIG_SND_HDA_RECONFIG` is a new option, and this depends on the +hwdep option above. When enabled, you'll have some sysfs files under +the corresponding hwdep directory. See "HD-audio reconfiguration" +section below. + +`CONFIG_SND_HDA_POWER_SAVE` option enables the power-saving feature. +See "Power-saving" section below. + + +Codec Proc-File +~~~~~~~~~~~~~~~ +The codec proc-file is a treasure-chest for debugging HD-audio. +It shows most of useful information of each codec widget. + +The proc file is located in /proc/asound/card*/codec#*, one file per +each codec slot. You can know the codec vendor, product id and +names, the type of each widget, capabilities and so on. +This file, however, doesn't show the jack sensing state, so far. This +is because the jack-sensing might be depending on the trigger state. + +This file will be picked up by the debug tools, and also it can be fed +to the emulator as the primary codec information. See the debug tools +section below. + +This proc file can be also used to check whether the generic parser is +used. When the generic parser is used, the vendor/product ID name +will appear as "Realtek ID 0262", instead of "Realtek ALC262". + + +HD-Audio Reconfiguration +~~~~~~~~~~~~~~~~~~~~~~~~ +This is an experimental feature to allow you re-configure the HD-audio +codec dynamically without reloading the driver. The following sysfs +files are available under each codec-hwdep device directory (e.g. +/sys/class/sound/hwC0D0): + +vendor_id:: + Shows the 32bit codec vendor-id hex number. You can change the + vendor-id value by writing to this file. +subsystem_id:: + Shows the 32bit codec subsystem-id hex number. You can change the + subsystem-id value by writing to this file. +revision_id:: + Shows the 32bit codec revision-id hex number. You can change the + revision-id value by writing to this file. +afg:: + Shows the AFG ID. This is read-only. +mfg:: + Shows the MFG ID. This is read-only. +name:: + Shows the codec name string. Can be changed by writing to this + file. +modelname:: + Shows the currently set `model` option. Can be changed by writing + to this file. +init_verbs:: + The extra verbs to execute at initialization. You can add a verb by + writing to this file. Pass tree numbers, nid, verb and parameter. +hints:: + Shows hint strings for codec parsers for any use. Right now it's + not used. +reconfig:: + Triggers the codec re-configuration. When any value is written to + this file, the driver re-initialize and parses the codec tree + again. All the changes done by the sysfs entries above are taken + into account. +clear:: + Resets the codec, removes the mixer elements and PCM stuff of the + specified codec, and clear all init verbs and hints. + + +Power-Saving +~~~~~~~~~~~~ +The power-saving is a kind of auto-suspend of the device. When the +device is inactive for a certain time, the device is automatically +turned off to save the power. The time to go down is specified via +`power_save` module option, and this option can be changed dynamically +via sysfs. + +The power-saving won't work when the analog loopback is enabled on +some codecs. Make sure that you mute all unneeded signal routes when +you want the power-saving. + +The power-saving feature might cause audible click noises at each +power-down/up depending on the device. Some of them might be +solvable, but some are hard, I'm afraid. Some distros such as +openSUSE enables the power-saving feature automatically when the power +cable is unplugged. Thus, if you hear noises, suspect first the +power-saving. See /sys/modules/snd_hda_intel/parameters/power_save to +check the current value. If it's non-zero, the feature is turned on. + + +Sending a Bug Report +~~~~~~~~~~~~~~~~~~~~ +If any model or module options don't work for your device, it's time +to send a bug report to the developers. Give the following in your +bug report: + +- Hardware vendor, product and model names +- Kernel version (and ALSA-driver version if you built externally) +- `alsa-info.sh` output; run with `--no-upload` option. See the + section below about alsa-info + +If it's a regression, at best, send alsa-info outputs of both working +and non-working kernels. This is really helpful because we can +compare the codec registers directly. + +Send a bug report either the followings: + +kernel-bugzilla:: + http://bugme.linux-foundation.org/ +alsa-devel ML:: + alsa-devel@alsa-project.org + + +DEBUG TOOLS +----------- + +This section describes some tools available for debugging HD-audio +problems. + +alsa-info +~~~~~~~~~ +The script `alsa-info.sh` is a very useful tool to gather the audio +device information. You can fetch the latest version from: + +- http://www.alsa-project.org/alsa-info.sh + +Run this script as root, and it will gather the important information +such as the module lists, module parameters, proc file contents +including the codec proc files, mixer outputs and the control +elements. As default, it will store the information onto a web server +on alsa-project.org. But, if you send a bug report, it'd be better to +run with `--no-upload` option, and attach the generated file. + +There are some other useful options. See `--help` option output for +details. + + +hda-verb +~~~~~~~~ +hda-verb is a tiny program that allows you to access the HD-audio +codec directly. It executes a HD-audio codec verb directly. +This program accesses the hwdep device, thus you need to enable the +kernel config `CONFIG_SND_HDA_HWDEP=y` beforehand. + +The hda-verb program takes four arguments: the hwdep device file, the +widget NID, the verb and the parameter. When you access to the codec +on the slot 2 of the card 0, pass /dev/snd/hwC0D2 to the first +argument, typically. (However, the real path name depends on the +system.) + +The second parameter is the widget number-id to access. The third +parameter can be either a hex/digit number or a string corresponding +to a verb. Similarly, the last parameter is the value to write, or +can be a string for the parameter type. + +------------------------------------------------------------------------ + % hda-verb /dev/snd/hwC0D0 0x12 0x701 2 + nid = 0x12, verb = 0x701, param = 0x2 + value = 0x0 + + % hda-verb /dev/snd/hwC0D0 0x0 PARAMETERS VENDOR_ID + nid = 0x0, verb = 0xf00, param = 0x0 + value = 0x10ec0262 + + % hda-verb /dev/snd/hwC0D0 2 set_a 0xb080 + nid = 0x2, verb = 0x300, param = 0xb080 + value = 0x0 +------------------------------------------------------------------------ + +Although you can issue any verbs with this program, the driver state +won't be always updated. For example, the volume values are usually +cached in the driver, and thus changing the widget amp value directly +via hda-verb won't change the mixer value. + +The hda-verb program is found in the ftp directory: + +- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/ + +Also a git repository is available: + +- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/hda-verb.git + +See README file in the tarball for more details about hda-verb +program. + + +hda-analyzer +~~~~~~~~~~~~ +hda-analyzer provides a graphical interface to access the raw HD-audio +control, based on pyGTK2 binding. It's a more powerful version of +hda-verb. The program gives you a easy-to-use GUI stuff for showing +the widget information and adjusting the amp values, as well as the +proc-compatible output. + +The hda-analyzer is a part of alsa.git repository in +alsa-project.org: + +- http://git.alsa-project.org/?p=alsa.git;a=tree;f=hda-analyzer + + +hda-emu +~~~~~~~ +hda-emu is a HD-audio emulator. The main purpose of this program is +to debug an HD-audio codec without the real hardware. Thus, it +doesn't emulate the behavior with the real audio I/O, but it just +dumps the codec register changes and the ALSA-driver internal changes +at probing and operating the HD-audio driver. + +The program requires a codec proc-file to simulate. Get a proc file +for the target codec beforehand, or pick up an example codec from the +codec proc collections in the tarball. Then, run the program with the +proc file, and the hda-emu program will start parsing the codec file +and simulates the HD-audio driver: + +------------------------------------------------------------------------ + % hda-emu codecs/stac9200-dell-d820-laptop + # Parsing.. + hda_codec: Unknown model for STAC9200, using BIOS defaults + hda_codec: pin nid 08 bios pin config 40c003fa + .... +------------------------------------------------------------------------ + +The program gives you only a very dumb command-line interface. You +can get a proc-file dump at the current state, get a list of control +(mixer) elements, set/get the control element value, simulate the PCM +operation, the jack plugging simulation, etc. + +The package is found in: + +- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/ + +A git repository is available: + +- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/hda-emu.git + +See README file in the tarball for more details about hda-emu +program. -- cgit v1.2.3 From 5410ecc0def8955ab99810c5626cc7e156991896 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 6 Nov 2008 03:31:34 -0500 Subject: kbuild: introduce $(kecho) convenience echo There is a bunch of places in the build system where we do 'echo' to show some nice status lines. This means we still get output when running in silent mode. So declare a new KECHO variable that only does 'echo' when we are in a suitable verbose build mode. Signed-off-by: Mike Frysinger [sam: added Documentation] Signed-off-by: Sam Ravnborg --- Documentation/kbuild/makefiles.txt | 14 ++++++++++++++ scripts/Kbuild.include | 7 +++++++ 2 files changed, 21 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 7a7753321a26..51104f9194a5 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -383,6 +383,20 @@ more details, with real examples. to prerequisites are referenced with $(src) (because they are not generated files). + $(kecho) + echoing information to user in a rule is often a good practice + but when execution "make -s" one does not expect to see any output + except for warnings/errors. + To support this kbuild define $(kecho) which will echo out the + text following $(kecho) to stdout except if "make -s" is used. + + Example: + #arch/blackfin/boot/Makefile + $(obj)/vmImage: $(obj)/vmlinux.gz + $(call if_changed,uimage) + @$(kecho) 'Kernel: $@ is ready' + + --- 3.11 $(CC) support functions The kernel may be built with several different versions of diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 936940b541f9..8cf87e815e51 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -24,6 +24,13 @@ basetarget = $(basename $(notdir $@)) # Escape single quote for use in echo statements escsq = $(subst $(squote),'\$(squote)',$1) +### +# Easy method for doing a status message + kecho := : + quiet_kecho := echo +silent_kecho := : +kecho := $($(quiet)kecho) + ### # filechk is used to check if the content of a generated file is updated. # Sample usage: -- cgit v1.2.3 From 4e7c4d7b6d980264194c2aecbbb1e1e4c7302b63 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 4 Dec 2008 10:25:37 +0100 Subject: ALSA: hda - Add reference to HD-Audio.txt in ALSA-Configuration.txt Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3cd2ad958176..3f2bdd533c3f 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -778,6 +778,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. specify a certain model in such a case. There are different models depending on the codec chip. + See Documentation/sound/alsa/HD-Audio.txt for some details. + Model name Description ---------- ----------- ALC880 -- cgit v1.2.3 From b74ca3a896b9ab5f952bc440154758e708c48884 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Mon, 8 Dec 2008 01:14:16 -0800 Subject: netdevice: Kill netdev->priv This is the last shoot of this series. After I removing all directly reference of netdev->priv, I am killing "priv" of "struct net_device" and fixing relative comments/docs. Anyone will not be allowed to reference netdev->priv directly. If you want to reference the memory of private data, use netdev_priv() instead. If the private data is not allocted when alloc_netdev(), use netdev->ml_priv to point that memory after you creating that private data. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- Documentation/networking/driver.txt | 2 +- Documentation/networking/netdevices.txt | 2 +- drivers/net/3c501.h | 2 +- drivers/net/atp.c | 2 +- drivers/net/eexpress.c | 2 +- drivers/net/forcedeth.c | 4 ++-- drivers/net/lance.c | 2 +- drivers/net/myri_sbus.c | 2 +- drivers/net/pci-skeleton.c | 2 +- drivers/net/sun3_82586.c | 2 +- drivers/net/sunbmac.c | 2 +- drivers/net/tokenring/3c359.c | 5 +++-- drivers/net/via-rhine.c | 9 +++++---- drivers/net/wireless/strip.c | 2 +- include/linux/hdlc.h | 2 +- include/linux/netdevice.h | 1 - net/atm/mpc.c | 4 ++-- net/core/dev.c | 6 ------ 18 files changed, 24 insertions(+), 29 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/driver.txt b/Documentation/networking/driver.txt index ea72d2e66ca8..03283daa64fe 100644 --- a/Documentation/networking/driver.txt +++ b/Documentation/networking/driver.txt @@ -13,7 +13,7 @@ Transmit path guidelines: static int drv_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { - struct drv *dp = dev->priv; + struct drv *dp = netdev_priv(dev); lock_tx(dp); ... diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt index d0f71fc7f782..a2ab6a0b116d 100644 --- a/Documentation/networking/netdevices.txt +++ b/Documentation/networking/netdevices.txt @@ -18,7 +18,7 @@ There are routines in net_init.c to handle the common cases of alloc_etherdev, alloc_netdev. These reserve extra space for driver private data which gets freed when the network device is freed. If separately allocated data is attached to the network device -(dev->priv) then it is up to the module exit handler to free that. +(netdev_priv(dev)) then it is up to the module exit handler to free that. MTU === diff --git a/drivers/net/3c501.h b/drivers/net/3c501.h index cfec64efff78..f40b0493337a 100644 --- a/drivers/net/3c501.h +++ b/drivers/net/3c501.h @@ -23,7 +23,7 @@ static const struct ethtool_ops netdev_ethtool_ops; static int el_debug = EL_DEBUG; /* - * Board-specific info in dev->priv. + * Board-specific info in netdev_priv(dev). */ struct net_local diff --git a/drivers/net/atp.c b/drivers/net/atp.c index 7028b276dfd3..1d6b74c5d6c9 100644 --- a/drivers/net/atp.c +++ b/drivers/net/atp.c @@ -420,7 +420,7 @@ static unsigned short __init eeprom_op(long ioaddr, u32 cmd) registers that "should" only need to be set once at boot, so that there is non-reboot way to recover if something goes wrong. - This is an attachable device: if there is no dev->priv entry then it wasn't + This is an attachable device: if there is no private entry then it wasn't probed for at boot-time, and we need to probe for it again. */ static int net_open(struct net_device *dev) diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c index a125e41240f5..9ff3f2f5e382 100644 --- a/drivers/net/eexpress.c +++ b/drivers/net/eexpress.c @@ -1046,7 +1046,7 @@ static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf, /* * Sanity check the suspected EtherExpress card * Read hardware address, reset card, size memory and initialize buffer - * memory pointers. These are held in dev->priv, in case someone has more + * memory pointers. These are held in netdev_priv(), in case someone has more * than one card in a machine. */ diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 12384df8cb2b..1f2b24743ee9 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -712,12 +712,12 @@ struct nv_skb_map { /* * SMP locking: - * All hardware access under dev->priv->lock, except the performance + * All hardware access under netdev_priv(dev)->lock, except the performance * critical parts: * - rx is (pseudo-) lockless: it relies on the single-threading provided * by the arch code for interrupts. * - tx setup is lockless: it relies on netif_tx_lock. Actual submission - * needs dev->priv->lock :-( + * needs netdev_priv(dev)->lock :-( * - set_multicast_list: preparation lockless, relies on netif_tx_lock. */ diff --git a/drivers/net/lance.c b/drivers/net/lance.c index e81b6113ed94..d7afb938ea62 100644 --- a/drivers/net/lance.c +++ b/drivers/net/lance.c @@ -519,7 +519,7 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int } } - /* We can't allocate dev->priv from alloc_etherdev() because it must + /* We can't allocate private data from alloc_etherdev() because it must a ISA DMA-able region. */ chipname = chip_table[lance_version].name; printk("%s: %s at %#3x, ", dev->name, chipname, ioaddr); diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c index 6833f65f8aec..899ed065a147 100644 --- a/drivers/net/myri_sbus.c +++ b/drivers/net/myri_sbus.c @@ -1091,7 +1091,7 @@ static int __devinit myri_sbus_probe(struct of_device *op, const struct of_devic err_free_irq: free_irq(dev->irq, dev); err: - /* This will also free the co-allocated 'dev->priv' */ + /* This will also free the co-allocated private data*/ free_netdev(dev); return -ENODEV; } diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index b23b5c397b1d..c95fd72c3bb9 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -781,7 +781,7 @@ static int __devinit netdrv_init_one (struct pci_dev *pdev, dev->irq = pdev->irq; dev->base_addr = (unsigned long) ioaddr; - /* dev->priv/tp zeroed and aligned in alloc_etherdev */ + /* netdev_priv()/tp zeroed and aligned in alloc_etherdev */ tp = netdev_priv(dev); /* note: tp->chipset set in netdrv_init_board */ diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c index e8f97d5c9c23..e0d84772771c 100644 --- a/drivers/net/sun3_82586.c +++ b/drivers/net/sun3_82586.c @@ -209,7 +209,7 @@ static int sun3_82586_open(struct net_device *dev) static int check586(struct net_device *dev,char *where,unsigned size) { struct priv pb; - struct priv *p = /* (struct priv *) dev->priv*/ &pb; + struct priv *p = &pb; char *iscp_addr; int i; diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c index 977b3e08bbfc..7f69c7f176c4 100644 --- a/drivers/net/sunbmac.c +++ b/drivers/net/sunbmac.c @@ -1233,7 +1233,7 @@ fail_and_cleanup: bp->bmac_block, bp->bblock_dvma); - /* This also frees the co-located 'dev->priv' */ + /* This also frees the co-located private data */ free_netdev(dev); return -ENODEV; } diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c index e7a944657cf8..43853e3b210e 100644 --- a/drivers/net/tokenring/3c359.c +++ b/drivers/net/tokenring/3c359.c @@ -296,8 +296,9 @@ static int __devinit xl_probe(struct pci_dev *pdev, } ; /* - * Allowing init_trdev to allocate the dev->priv structure will align xl_private - * on a 32 bytes boundary which we need for the rx/tx descriptors + * Allowing init_trdev to allocate the private data will align + * xl_private on a 32 bytes boundary which we need for the rx/tx + * descriptors */ dev = alloc_trdev(sizeof(struct xl_private)) ; diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 93b74b7b7077..8d405c83df8b 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -191,12 +191,13 @@ IIId. Synchronization The driver runs as two independent, single-threaded flows of control. One is the send-packet routine, which enforces single-threaded use by the -dev->priv->lock spinlock. The other thread is the interrupt handler, which -is single threaded by the hardware and interrupt handling software. +netdev_priv(dev)->lock spinlock. The other thread is the interrupt handler, +which is single threaded by the hardware and interrupt handling software. The send packet thread has partial control over the Tx ring. It locks the -dev->priv->lock whenever it's queuing a Tx packet. If the next slot in the ring -is not available it stops the transmit queue by calling netif_stop_queue. +netdev_priv(dev)->lock whenever it's queuing a Tx packet. If the next slot in +the ring is not available it stops the transmit queue by +calling netif_stop_queue. The interrupt handler has exclusive control over the Rx ring and records stats from the Tx ring. After reaping the stats, it marks the Tx queue entry as diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index 692e6c5e009a..dd0de3a9ed4e 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -2494,7 +2494,7 @@ static void strip_dev_setup(struct net_device *dev) dev->type = ARPHRD_METRICOM; /* dtang */ dev->hard_header_len = sizeof(STRIP_Header); /* - * dev->priv Already holds a pointer to our struct strip + * netdev_priv(dev) Already holds a pointer to our struct strip */ *(MetricomAddress *) & dev->broadcast = broadcast_address; diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h index e960faac609d..fd47a151665e 100644 --- a/include/linux/hdlc.h +++ b/include/linux/hdlc.h @@ -43,7 +43,7 @@ struct hdlc_proto { }; -/* Pointed to by dev->priv */ +/* Pointed to by netdev_priv(dev) */ typedef struct hdlc_device { /* used by HDLC layer to take control over HDLC device from hw driver*/ int (*attach)(struct net_device *dev, diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 0df0db068ac3..47e731528315 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -785,7 +785,6 @@ struct net_device /* * One part is mostly used on xmit path (device) */ - void *priv; /* pointer to private data */ /* These may be needed for future network-power-down code. */ unsigned long trans_start; /* Time (in jiffies) of last Tx */ diff --git a/net/atm/mpc.c b/net/atm/mpc.c index 12e9ea371db1..039d5cc72c3d 100644 --- a/net/atm/mpc.c +++ b/net/atm/mpc.c @@ -341,8 +341,8 @@ static const char *mpoa_device_type_string(char type) } /* - * lec device calls this via its dev->priv->lane2_ops->associate_indicator() - * when it sees a TLV in LE_ARP packet. + * lec device calls this via its netdev_priv(dev)->lane2_ops + * ->associate_indicator() when it sees a TLV in LE_ARP packet. * We fill in the pointer above when we see a LANE2 lec initializing * See LANE2 spec 3.1.5 * diff --git a/net/core/dev.c b/net/core/dev.c index 4615e9a443aa..f54cac76438a 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4378,12 +4378,6 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name, dev->num_tx_queues = queue_count; dev->real_num_tx_queues = queue_count; - if (sizeof_priv) { - dev->priv = ((char *)dev + - ((sizeof(struct net_device) + NETDEV_ALIGN_CONST) - & ~NETDEV_ALIGN_CONST)); - } - dev->gso_max_size = GSO_MAX_SIZE; netdev_init_queues(dev); -- cgit v1.2.3 From 0049bab5e765aa74cf767a834fa336e19453fc5e Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Mon, 8 Dec 2008 01:18:05 -0800 Subject: dccp: Remove obsolete parts of the old CCID interface The TX/RX CCIDs of the minisock are now redundant: similar to the Ack Vector case, their value equals initially that of the sysctl, but at the end of feature negotiation may be something different. The old interface removed by this patch thus has been replaced by the newer interface to dynamically query the currently loaded CCIDs. Also removed are the constructors for the TX CCID and the RX CCID, since the switch "rx <-> non-rx" is done by the handler in minisocks.c (and the handler is the only place in the code where CCIDs are loaded). Signed-off-by: Gerrit Renker Acked-by: Ian McDonald Signed-off-by: David S. Miller --- Documentation/networking/dccp.txt | 5 +++-- include/linux/dccp.h | 3 --- net/dccp/ccid.c | 14 -------------- net/dccp/ccid.h | 5 ----- net/dccp/feat.c | 13 ------------- net/dccp/minisocks.c | 2 -- 6 files changed, 3 insertions(+), 39 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index 610083ff73f6..a203d132dbef 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -140,10 +140,11 @@ send_ackvec = 1 Whether or not to send Ack Vector options (sec. 11.5). tx_ccid = 2 - Default CCID for the sender-receiver half-connection. + Default CCID for the sender-receiver half-connection. Depending on the + choice of CCID, the Send Ack Vector feature is enabled automatically. rx_ccid = 2 - Default CCID for the receiver-sender half-connection. + Default CCID for the receiver-sender half-connection; see tx_ccid. seq_window = 100 The initial sequence window (sec. 7.5.2). diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 6a72ff52a8a4..46daea312d92 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -370,7 +370,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * Will be used to pass the state from dccp_request_sock to dccp_sock. * * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) - * @dccpms_ccid - Congestion Control Id (CCID) (section 10) * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2) * @dccpms_pending - List of features being negotiated @@ -378,8 +377,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) */ struct dccp_minisock { __u64 dccpms_sequence_window; - __u8 dccpms_rx_ccid; - __u8 dccpms_tx_ccid; __u8 dccpms_send_ack_vector; __u8 dccpms_send_ndp_count; struct list_head dccpms_pending; diff --git a/net/dccp/ccid.c b/net/dccp/ccid.c index 647cb0614f84..bcc643f992ae 100644 --- a/net/dccp/ccid.c +++ b/net/dccp/ccid.c @@ -253,20 +253,6 @@ out_module_put: EXPORT_SYMBOL_GPL(ccid_new); -struct ccid *ccid_hc_rx_new(unsigned char id, struct sock *sk, gfp_t gfp) -{ - return ccid_new(id, sk, 1, gfp); -} - -EXPORT_SYMBOL_GPL(ccid_hc_rx_new); - -struct ccid *ccid_hc_tx_new(unsigned char id,struct sock *sk, gfp_t gfp) -{ - return ccid_new(id, sk, 0, gfp); -} - -EXPORT_SYMBOL_GPL(ccid_hc_tx_new); - static void ccid_delete(struct ccid *ccid, struct sock *sk, int rx) { struct ccid_operations *ccid_ops; diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h index 803343aed004..18f69423a708 100644 --- a/net/dccp/ccid.h +++ b/net/dccp/ccid.h @@ -111,11 +111,6 @@ extern int ccid_getsockopt_builtin_ccids(struct sock *sk, int len, extern struct ccid *ccid_new(unsigned char id, struct sock *sk, int rx, gfp_t gfp); -extern struct ccid *ccid_hc_rx_new(unsigned char id, struct sock *sk, - gfp_t gfp); -extern struct ccid *ccid_hc_tx_new(unsigned char id, struct sock *sk, - gfp_t gfp); - static inline int ccid_get_current_rx_ccid(struct dccp_sock *dp) { struct ccid *ccid = dp->dccps_hc_rx_ccid; diff --git a/net/dccp/feat.c b/net/dccp/feat.c index 077f78d579c4..a0d5891a37bf 100644 --- a/net/dccp/feat.c +++ b/net/dccp/feat.c @@ -1124,22 +1124,9 @@ int dccp_feat_init(struct sock *sk) INIT_LIST_HEAD(&dmsk->dccpms_pending); /* XXX no longer used */ INIT_LIST_HEAD(&dmsk->dccpms_conf); /* XXX no longer used */ - /* CCID L */ - rc = __feat_register_sp(&dp->dccps_featneg, DCCPF_CCID, 1, 0, - &dmsk->dccpms_tx_ccid, 1); - if (rc) - goto out; - - /* CCID R */ - rc = __feat_register_sp(&dp->dccps_featneg, DCCPF_CCID, 0, 0, - &dmsk->dccpms_rx_ccid, 1); - if (rc) - goto out; - /* Ack ratio */ rc = __feat_register_nn(&dp->dccps_featneg, DCCPF_ACK_RATIO, 0, dp->dccps_l_ack_ratio); -out: return rc; } diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index 308b6b928c3d..210c346899ba 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -45,8 +45,6 @@ EXPORT_SYMBOL_GPL(dccp_death_row); void dccp_minisock_init(struct dccp_minisock *dmsk) { dmsk->dccpms_sequence_window = sysctl_dccp_feat_sequence_window; - dmsk->dccpms_rx_ccid = sysctl_dccp_feat_rx_ccid; - dmsk->dccpms_tx_ccid = sysctl_dccp_feat_tx_ccid; dmsk->dccpms_send_ack_vector = sysctl_dccp_feat_send_ack_vector; dmsk->dccpms_send_ndp_count = sysctl_dccp_feat_send_ndp_count; } -- cgit v1.2.3 From 4098dce5be537a157eed4a326efd464109825b8b Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Mon, 8 Dec 2008 01:18:37 -0800 Subject: dccp: Remove manual influence on NDP Count feature Updating the NDP count feature is handled automatically now: * for CCID-2 it is disabled, since the code does not use NDP counts; * for CCID-3 it is enabled, as NDP counts are used to determine loss lengths. Allowing the user to change NDP values leads to unpredictable and failing behaviour, since it is then possible to disable NDP counts even when they are needed (e.g. in CCID-3). This means that only those user settings are sensible that agree with the values for Send NDP Count implied by the choice of CCID. But those settings are already activated by the feature negotiation (CCID dependency tracking), hence this form of support is redundant. At startup the initialisation of the NDP count feature uses the default value of 0, which is done implicitly by the zeroing-out of the socket when it is allocated. If the choice of CCID or feature negotiation enables NDP count, this will then be updated via the NDP activation handler. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald Signed-off-by: David S. Miller --- Documentation/networking/dccp.txt | 3 --- include/linux/dccp.h | 4 ++-- net/dccp/dccp.h | 1 - net/dccp/feat.c | 2 +- net/dccp/minisocks.c | 1 - net/dccp/options.c | 4 +--- net/dccp/sysctl.c | 7 ------- 7 files changed, 4 insertions(+), 18 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index a203d132dbef..1403745ab406 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -133,9 +133,6 @@ retries2 importance for retransmitted acknowledgments and feature negotiation, data packets are never retransmitted. Analogue of tcp_retries2. -send_ndp = 1 - Whether or not to send NDP count options (sec. 7.7.2). - send_ackvec = 1 Whether or not to send Ack Vector options (sec. 11.5). diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 46daea312d92..60e94438eadd 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -371,14 +371,12 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) - * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2) * @dccpms_pending - List of features being negotiated * @dccpms_conf - */ struct dccp_minisock { __u64 dccpms_sequence_window; __u8 dccpms_send_ack_vector; - __u8 dccpms_send_ndp_count; struct list_head dccpms_pending; struct list_head dccpms_conf; }; @@ -490,6 +488,7 @@ struct dccp_ackvec; * @dccps_r_ack_ratio - feature-remote Ack Ratio * @dccps_pcslen - sender partial checksum coverage (via sockopt) * @dccps_pcrlen - receiver partial checksum coverage (via sockopt) + * @dccps_send_ndp_count - local Send NDP Count feature (7.7.2) * @dccps_ndp_count - number of Non Data Packets since last data packet * @dccps_mss_cache - current value of MSS (path MTU minus header sizes) * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4) @@ -529,6 +528,7 @@ struct dccp_sock { __u16 dccps_r_ack_ratio; __u8 dccps_pcslen:4; __u8 dccps_pcrlen:4; + __u8 dccps_send_ndp_count:1; __u64 dccps_ndp_count:48; unsigned long dccps_rate_last; struct dccp_minisock dccps_minisock; diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index 94f6785f81ec..e0759d098b9a 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -99,7 +99,6 @@ extern int sysctl_dccp_feat_sequence_window; extern int sysctl_dccp_feat_rx_ccid; extern int sysctl_dccp_feat_tx_ccid; extern int sysctl_dccp_feat_send_ack_vector; -extern int sysctl_dccp_feat_send_ndp_count; extern int sysctl_dccp_tx_qlen; extern int sysctl_dccp_sync_ratelimit; diff --git a/net/dccp/feat.c b/net/dccp/feat.c index a0d5891a37bf..30f9fb76b921 100644 --- a/net/dccp/feat.c +++ b/net/dccp/feat.c @@ -85,7 +85,7 @@ static int dccp_hdlr_ackvec(struct sock *sk, u64 enable, bool rx) static int dccp_hdlr_ndp(struct sock *sk, u64 enable, bool rx) { if (!rx) - dccp_msk(sk)->dccpms_send_ndp_count = (enable > 0); + dccp_sk(sk)->dccps_send_ndp_count = (enable > 0); return 0; } diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index 210c346899ba..02b14812464a 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -46,7 +46,6 @@ void dccp_minisock_init(struct dccp_minisock *dmsk) { dmsk->dccpms_sequence_window = sysctl_dccp_feat_sequence_window; dmsk->dccpms_send_ack_vector = sysctl_dccp_feat_send_ack_vector; - dmsk->dccpms_send_ndp_count = sysctl_dccp_feat_send_ndp_count; } void dccp_time_wait(struct sock *sk, int state, int timeo) diff --git a/net/dccp/options.c b/net/dccp/options.c index debb1008c7ad..e9d674874b4e 100644 --- a/net/dccp/options.c +++ b/net/dccp/options.c @@ -27,7 +27,6 @@ int sysctl_dccp_feat_sequence_window = DCCPF_INITIAL_SEQUENCE_WINDOW; int sysctl_dccp_feat_rx_ccid = DCCPF_INITIAL_CCID; int sysctl_dccp_feat_tx_ccid = DCCPF_INITIAL_CCID; int sysctl_dccp_feat_send_ack_vector = DCCPF_INITIAL_SEND_ACK_VECTOR; -int sysctl_dccp_feat_send_ndp_count = DCCPF_INITIAL_SEND_NDP_COUNT; u64 dccp_decode_value_var(const u8 *bf, const u8 len) { @@ -531,8 +530,7 @@ int dccp_insert_options(struct sock *sk, struct sk_buff *skb) DCCP_SKB_CB(skb)->dccpd_opt_len = 0; - if (dmsk->dccpms_send_ndp_count && - dccp_insert_option_ndp(sk, skb)) + if (dp->dccps_send_ndp_count && dccp_insert_option_ndp(sk, skb)) return -1; if (DCCP_SKB_CB(skb)->dccpd_type != DCCP_PKT_DATA) { diff --git a/net/dccp/sysctl.c b/net/dccp/sysctl.c index f6e54f433e29..587c12f915c1 100644 --- a/net/dccp/sysctl.c +++ b/net/dccp/sysctl.c @@ -47,13 +47,6 @@ static struct ctl_table dccp_default_table[] = { .mode = 0644, .proc_handler = proc_dointvec, }, - { - .procname = "send_ndp", - .data = &sysctl_dccp_feat_send_ndp_count, - .maxlen = sizeof(sysctl_dccp_feat_send_ndp_count), - .mode = 0644, - .proc_handler = proc_dointvec, - }, { .procname = "request_retries", .data = &sysctl_dccp_request_retries, -- cgit v1.2.3 From 6fdd34d43bff8be9bb925b49d87a0ee144d2ab07 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Mon, 8 Dec 2008 01:19:06 -0800 Subject: dccp ccid-2: Phase out the use of boolean Ack Vector sysctl This removes the use of the sysctl and the minisock variable for the Send Ack Vector feature, as it now is handled fully dynamically via feature negotiation (i.e. when CCID-2 is enabled, Ack Vectors are automatically enabled as per RFC 4341, 4.). Using a sysctl in parallel to this implementation would open the door to crashes, since much of the code relies on tests of the boolean minisock / sysctl variable. Thus, this patch replaces all tests of type if (dccp_msk(sk)->dccpms_send_ack_vector) /* ... */ with if (dp->dccps_hc_rx_ackvec != NULL) /* ... */ The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature negotiation concluded that Ack Vectors are to be used on the half-connection. Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child), so that the test is a valid one. The activation handler for Ack Vectors is called as soon as the feature negotiation has concluded at the * server when the Ack marking the transition RESPOND => OPEN arrives; * client after it has sent its ACK, marking the transition REQUEST => PARTOPEN. Adding the sequence number of the Response packet to the Ack Vector has been removed, since (a) connection establishment implies that the Response has been received; (b) the CCIDs only look at packets received in the (PART)OPEN state, i.e. this entry will always be ignored; (c) it can not be used for anything useful - to detect loss for instance, only packets received after the loss can serve as pseudo-dupacks. There was a FIXME to change the error code when dccp_ackvec_add() fails. I removed this after finding out that: * the check whether ackno < ISN is already made earlier, * this Response is likely the 1st packet with an Ackno that the client gets, * so when dccp_ackvec_add() fails, the reason is likely not a packet error. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald Signed-off-by: David S. Miller --- Documentation/networking/dccp.txt | 3 --- include/linux/dccp.h | 3 --- net/dccp/dccp.h | 3 +-- net/dccp/diag.c | 2 +- net/dccp/input.c | 12 +++--------- net/dccp/minisocks.c | 1 - net/dccp/options.c | 7 ++----- net/dccp/proto.c | 3 +-- net/dccp/sysctl.c | 7 ------- 9 files changed, 8 insertions(+), 33 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index 1403745ab406..7a3bb1abb830 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -133,9 +133,6 @@ retries2 importance for retransmitted acknowledgments and feature negotiation, data packets are never retransmitted. Analogue of tcp_retries2. -send_ackvec = 1 - Whether or not to send Ack Vector options (sec. 11.5). - tx_ccid = 2 Default CCID for the sender-receiver half-connection. Depending on the choice of CCID, the Send Ack Vector feature is enabled automatically. diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 60e94438eadd..61734e27abb7 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -360,7 +360,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) #define DCCPF_INITIAL_SEQUENCE_WINDOW 100 #define DCCPF_INITIAL_ACK_RATIO 2 #define DCCPF_INITIAL_CCID DCCPC_CCID2 -#define DCCPF_INITIAL_SEND_ACK_VECTOR 1 /* FIXME: for now we're default to 1 but it should really be 0 */ #define DCCPF_INITIAL_SEND_NDP_COUNT 1 @@ -370,13 +369,11 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * Will be used to pass the state from dccp_request_sock to dccp_sock. * * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) - * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) * @dccpms_pending - List of features being negotiated * @dccpms_conf - */ struct dccp_minisock { __u64 dccpms_sequence_window; - __u8 dccpms_send_ack_vector; struct list_head dccpms_pending; struct list_head dccpms_conf; }; diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index e0759d098b9a..0bc4c9a02e19 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -98,7 +98,6 @@ extern int sysctl_dccp_retries2; extern int sysctl_dccp_feat_sequence_window; extern int sysctl_dccp_feat_rx_ccid; extern int sysctl_dccp_feat_tx_ccid; -extern int sysctl_dccp_feat_send_ack_vector; extern int sysctl_dccp_tx_qlen; extern int sysctl_dccp_sync_ratelimit; @@ -434,7 +433,7 @@ static inline int dccp_ack_pending(const struct sock *sk) const struct dccp_sock *dp = dccp_sk(sk); return dp->dccps_timestamp_echo != 0 || #ifdef CONFIG_IP_DCCP_ACKVEC - (dccp_msk(sk)->dccpms_send_ack_vector && + (dp->dccps_hc_rx_ackvec != NULL && dccp_ackvec_pending(dp->dccps_hc_rx_ackvec)) || #endif inet_csk_ack_scheduled(sk); diff --git a/net/dccp/diag.c b/net/dccp/diag.c index d1e100395efb..652a1b67f727 100644 --- a/net/dccp/diag.c +++ b/net/dccp/diag.c @@ -29,7 +29,7 @@ static void dccp_get_info(struct sock *sk, struct tcp_info *info) info->tcpi_backoff = icsk->icsk_backoff; info->tcpi_pmtu = icsk->icsk_pmtu_cookie; - if (dccp_msk(sk)->dccpms_send_ack_vector) + if (dp->dccps_hc_rx_ackvec != NULL) info->tcpi_options |= TCPI_OPT_SACK; ccid_hc_rx_get_info(dp->dccps_hc_rx_ccid, sk, info); diff --git a/net/dccp/input.c b/net/dccp/input.c index 0672b7e1763e..5eb443f656c1 100644 --- a/net/dccp/input.c +++ b/net/dccp/input.c @@ -163,7 +163,7 @@ static void dccp_event_ack_recv(struct sock *sk, struct sk_buff *skb) { struct dccp_sock *dp = dccp_sk(sk); - if (dccp_msk(sk)->dccpms_send_ack_vector) + if (dp->dccps_hc_rx_ackvec != NULL) dccp_ackvec_check_rcv_ackno(dp->dccps_hc_rx_ackvec, sk, DCCP_SKB_CB(skb)->dccpd_ack_seq); } @@ -375,7 +375,7 @@ int dccp_rcv_established(struct sock *sk, struct sk_buff *skb, if (DCCP_SKB_CB(skb)->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ) dccp_event_ack_recv(sk, skb); - if (dccp_msk(sk)->dccpms_send_ack_vector && + if (dp->dccps_hc_rx_ackvec != NULL && dccp_ackvec_add(dp->dccps_hc_rx_ackvec, sk, DCCP_SKB_CB(skb)->dccpd_seq, DCCP_ACKVEC_STATE_RECEIVED)) @@ -434,12 +434,6 @@ static int dccp_rcv_request_sent_state_process(struct sock *sk, dp->dccps_syn_rtt = dccp_sample_rtt(sk, 10 * (tstamp - dp->dccps_options_received.dccpor_timestamp_echo)); - if (dccp_msk(sk)->dccpms_send_ack_vector && - dccp_ackvec_add(dp->dccps_hc_rx_ackvec, sk, - DCCP_SKB_CB(skb)->dccpd_seq, - DCCP_ACKVEC_STATE_RECEIVED)) - goto out_invalid_packet; /* FIXME: change error code */ - /* Stop the REQUEST timer */ inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS); WARN_ON(sk->sk_send_head == NULL); @@ -637,7 +631,7 @@ int dccp_rcv_state_process(struct sock *sk, struct sk_buff *skb, if (dcb->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ) dccp_event_ack_recv(sk, skb); - if (dccp_msk(sk)->dccpms_send_ack_vector && + if (dp->dccps_hc_rx_ackvec != NULL && dccp_ackvec_add(dp->dccps_hc_rx_ackvec, sk, DCCP_SKB_CB(skb)->dccpd_seq, DCCP_ACKVEC_STATE_RECEIVED)) diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index 02b14812464a..6821ae33dd37 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -45,7 +45,6 @@ EXPORT_SYMBOL_GPL(dccp_death_row); void dccp_minisock_init(struct dccp_minisock *dmsk) { dmsk->dccpms_sequence_window = sysctl_dccp_feat_sequence_window; - dmsk->dccpms_send_ack_vector = sysctl_dccp_feat_send_ack_vector; } void dccp_time_wait(struct sock *sk, int state, int timeo) diff --git a/net/dccp/options.c b/net/dccp/options.c index e9d674874b4e..7b1165c21f51 100644 --- a/net/dccp/options.c +++ b/net/dccp/options.c @@ -26,7 +26,6 @@ int sysctl_dccp_feat_sequence_window = DCCPF_INITIAL_SEQUENCE_WINDOW; int sysctl_dccp_feat_rx_ccid = DCCPF_INITIAL_CCID; int sysctl_dccp_feat_tx_ccid = DCCPF_INITIAL_CCID; -int sysctl_dccp_feat_send_ack_vector = DCCPF_INITIAL_SEND_ACK_VECTOR; u64 dccp_decode_value_var(const u8 *bf, const u8 len) { @@ -145,8 +144,7 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq, case DCCPO_ACK_VECTOR_1: if (dccp_packet_without_ack(skb)) /* RFC 4340, 11.4 */ break; - - if (dccp_msk(sk)->dccpms_send_ack_vector && + if (dp->dccps_hc_rx_ackvec != NULL && dccp_ackvec_parse(sk, skb, &ackno, opt, value, len)) goto out_invalid_option; break; @@ -526,7 +524,6 @@ static void dccp_insert_option_padding(struct sk_buff *skb) int dccp_insert_options(struct sock *sk, struct sk_buff *skb) { struct dccp_sock *dp = dccp_sk(sk); - struct dccp_minisock *dmsk = dccp_msk(sk); DCCP_SKB_CB(skb)->dccpd_opt_len = 0; @@ -547,7 +544,7 @@ int dccp_insert_options(struct sock *sk, struct sk_buff *skb) if (dccp_insert_option_timestamp(sk, skb)) return -1; - } else if (dmsk->dccpms_send_ack_vector && + } else if (dp->dccps_hc_rx_ackvec != NULL && dccp_ackvec_pending(dp->dccps_hc_rx_ackvec) && dccp_insert_option_ackvec(sk, skb)) { return -1; diff --git a/net/dccp/proto.c b/net/dccp/proto.c index 0941f8fe1675..d5c2bacb713c 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -201,7 +201,6 @@ EXPORT_SYMBOL_GPL(dccp_init_sock); void dccp_destroy_sock(struct sock *sk) { struct dccp_sock *dp = dccp_sk(sk); - struct dccp_minisock *dmsk = dccp_msk(sk); /* * DCCP doesn't use sk_write_queue, just sk_send_head @@ -219,7 +218,7 @@ void dccp_destroy_sock(struct sock *sk) kfree(dp->dccps_service_list); dp->dccps_service_list = NULL; - if (dmsk->dccpms_send_ack_vector) { + if (dp->dccps_hc_rx_ackvec != NULL) { dccp_ackvec_free(dp->dccps_hc_rx_ackvec); dp->dccps_hc_rx_ackvec = NULL; } diff --git a/net/dccp/sysctl.c b/net/dccp/sysctl.c index 587c12f915c1..018e210875e1 100644 --- a/net/dccp/sysctl.c +++ b/net/dccp/sysctl.c @@ -40,13 +40,6 @@ static struct ctl_table dccp_default_table[] = { .mode = 0644, .proc_handler = proc_dointvec, }, - { - .procname = "send_ackvec", - .data = &sysctl_dccp_feat_send_ack_vector, - .maxlen = sizeof(sysctl_dccp_feat_send_ack_vector), - .mode = 0644, - .proc_handler = proc_dointvec, - }, { .procname = "request_retries", .data = &sysctl_dccp_request_retries, -- cgit v1.2.3 From 94d6a5f7341ebaff53d4e41cc81fab37f0d9fbed Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 8 Dec 2008 15:52:21 -0600 Subject: user namespaces: document CFS behavior Documented the currently bogus state of support for CFS user groups with user namespaces. In particular, all users in a user namespace should be children of the user which created the user namespace. This is yet to be implemented. Signed-off-by: Serge E. Hallyn Acked-by: Dhaval Giani Signed-off-by: Serge E. Hallyn Signed-off-by: James Morris --- Documentation/scheduler/sched-design-CFS.txt | 21 +++++++++++++++++++++ kernel/user.c | 8 +++++++- 2 files changed, 28 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt index eb471c7a905e..8398ca4ff4ed 100644 --- a/Documentation/scheduler/sched-design-CFS.txt +++ b/Documentation/scheduler/sched-design-CFS.txt @@ -273,3 +273,24 @@ task groups and modify their CPU share using the "cgroups" pseudo filesystem. # #Launch gmplayer (or your favourite movie player) # echo > multimedia/tasks + +8. Implementation note: user namespaces + +User namespaces are intended to be hierarchical. But they are currently +only partially implemented. Each of those has ramifications for CFS. + +First, since user namespaces are hierarchical, the /sys/kernel/uids +presentation is inadequate. Eventually we will likely want to use sysfs +tagging to provide private views of /sys/kernel/uids within each user +namespace. + +Second, the hierarchical nature is intended to support completely +unprivileged use of user namespaces. So if using user groups, then +we want the users in a user namespace to be children of the user +who created it. + +That is currently unimplemented. So instead, every user in a new +user namespace will receive 1024 shares just like any user in the +initial user namespace. Note that at the moment creation of a new +user namespace requires each of CAP_SYS_ADMIN, CAP_SETUID, and +CAP_SETGID. diff --git a/kernel/user.c b/kernel/user.c index 6c924bc48c08..6608a3d8ca61 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -239,7 +239,13 @@ static struct kobj_type uids_ktype = { .release = uids_release, }; -/* create /sys/kernel/uids//cpu_share file for this user */ +/* + * Create /sys/kernel/uids//cpu_share file for this user + * We do not create this file for users in a user namespace (until + * sysfs tagging is implemented). + * + * See Documentation/scheduler/sched-design-CFS.txt for ramifications. + */ static int uids_user_create(struct user_struct *up) { struct kobject *kobj = &up->kobj; -- cgit v1.2.3 From 30bc4481de890e97dc001ee123761d89638cbc50 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 9 Dec 2008 08:23:45 +0100 Subject: ALSA: Updates about bug-reporting in ALSA-Configuration.txt Updated the information about bug-reporting for HD-audio. Mentioned alsa-info.sh and kernel bugzilla. Removed ALSA BTS address not to flood the unhandled reports any more. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3f2bdd533c3f..1c7334a3054e 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1091,8 +1091,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. "codec-patch". It's sometimes good for testing and debugging. If the default configuration doesn't work and one of the above - matches with your device, report it together with the PCI - subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel + matches with your device, report it together with alsa-info.sh + output (with --no-upload option) to kernel bugzilla or alsa-devel ML (see the section "Links and Addresses"). power_save and power_save_controller options are for power-saving @@ -2409,8 +2409,11 @@ Links and Addresses ALSA project homepage http://www.alsa-project.org - ALSA Bug Tracking System - https://bugtrack.alsa-project.org/bugs/ + Kernel Bugzilla + http://bugzilla.kernel.org/ ALSA Developers ML mailto:alsa-devel@alsa-project.org + + alsa-info.sh script + http://www.alsa-project.org/alsa-info.sh -- cgit v1.2.3 From d2afbe78a2922929ad44882d3583d938b9949a30 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 10 Dec 2008 09:28:15 +0100 Subject: ALSA: hda - Update documentation Minor typo-fixes and improvements on HD-Audio.txt. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 159 ++++++++++++++++++---------------- 1 file changed, 83 insertions(+), 76 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index e758f24017bf..ca8187de52d8 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -9,22 +9,25 @@ GENERAL HD-audio is the new standard on-board audio component on modern PCs after AC97. Although Linux has been supporting HD-audio since long time ago, there are often problems with new machines. A part of the -problem is broken BIOS, and rest is the driver implementation. This -document explains the trouble-shooting and debugging methods for the -HD-audio hardware. +problem is broken BIOS, and the rest is the driver implementation. +This document explains the brief trouble-shooting and debugging +methods for the HD-audio hardware. The HD-audio component consists of two parts: the controller chip and the codec chips on the HD-audio bus. Linux provides a single driver -for all controllers, snd-hda-intel. Since the HD-audio controllers -are supposed to be compatible, the single snd-hda-driver should work -in most cases. But, not surprisingly, there are known bugs and issues -specific to each controller type. The snd-hda-intel driver has a -bunch of workarounds for these as described below. +for all controllers, snd-hda-intel. Although the driver name contains +a word of a well-known harware vendor, it's not specific to it but for +all controller chips by other companies. Since the HD-audio +controllers are supposed to be compatible, the single snd-hda-driver +should work in most cases. But, not surprisingly, there are known +bugs and issues specific to each controller type. The snd-hda-intel +driver has a bunch of workarounds for these as described below. A controller may have multiple codecs. Usually you have one audio -codec and optionally one modem codec. In some cases, there can be -multiple audio codecs, e.g. for analog and digital outputs, but the -driver might not work properly. +codec and optionally one modem codec. In theory, there might be +multiple audio codecs, e.g. for analog and digital outputs, and the +driver might not work properly because of conflict of mixer elements. +This should be fixed in future if such hardware really exists. The snd-hda-intel driver has several different codec parsers depending on the codec. It has a generic parser as a fallback, but this @@ -48,15 +51,16 @@ DMA-Position Problem The most common problem of the controller is the inaccurate DMA pointer reporting. The DMA pointer for playback and capture can be read in two ways, either via a LPIB register or via a position-buffer -map. As default the driver tries to reads from the io-mapped -position-buffer, and falls back to LPIB if it appears unupdated. -However, this detection isn't perfect on some devices. In such a -case, you can change the default method via `position_fix` option. +map. As default the driver tries to read from the io-mapped +position-buffer, and falls back to LPIB if the position-buffer appears +dead. However, this detection isn't perfect on some devices. In such +a case, you can change the default method via `position_fix` option. `position_fix=1` means to use LPIB method explicitly. `position_fix=2` means to use the position-buffer. 0 is the default -value, the automatic check. If you get a problem of repeated sounds, -this option might help. +value, the automatic check and fallback to LPIB as described in the +above. If you get a problem of repeated sounds, this option might +help. In addition to that, every controller is known to be broken regarding the wake-up timing. It wakes up a few samples before actually @@ -67,9 +71,9 @@ via `bdl_pos_adj` option. When `bdl_pos_adj` is a negative value (as default), it's assigned to an appropriate value depending on the controller chip. For Intel -chip, it'd be 1 while it'd be 32 for others. Usually this works. +chips, it'd be 1 while it'd be 32 for others. Usually this works. Only in case it doesn't work and you get warning messages, you should -change to other values. +change this parameter to other values. Codec-Probing Problem @@ -77,13 +81,13 @@ Codec-Probing Problem A less often but a more severe problem is the codec probing. When BIOS reports the available codec slots wrongly, the driver gets confused and tries to access the non-existing codec slot. This often -results in the total screw-up, and destruct the further communication -with the codec chips. The symptom appears usually as the error -message like: +results in the total screw-up, and destructs the further communication +with the codec chips. The symptom appears usually as error messages +like: ------------------------------------------------------------------------ - hda_intel: azx_get_response timeout, switching to polling mode: \ + hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x12345678 - hda_intel: azx_get_response timeout, switching to single_cmd mode: \ + hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x12345678 ------------------------------------------------------------------------ @@ -98,9 +102,9 @@ accessing a non-existing codec slot. Thus, if the second error message appears, try to narrow the probed codec slots via `probe_mask` option. It's a bitmask, and each bit -corresponding to the codec slot. For example, to probe only the -first slot, pass `probe_mask=1`. For the first and the third slots, -pass `probe_mask=5` (where 5 = 1 | 4), and so on. +corresponds to the codec slot. For example, to probe only the first +slot, pass `probe_mask=1`. For the first and the third slots, pass +`probe_mask=5` (where 5 = 1 | 4), and so on. Since 2.6.29 kernel, the driver has a more robust probing method, so this error might happen rarely, though. @@ -119,10 +123,10 @@ HD-AUDIO CODEC Model Option ~~~~~~~~~~~~ -The most common problems with the HD-audio driver is the unsupported -codec features or the mismatched device configuration. Most of -codec-specific code has several preset models, either to override the -BIOS setup or to provide more comprehensive features. +The most common problem regarding the HD-audio driver is the +unsupported codec features or the mismatched device configuration. +Most of codec-specific code has several preset models, either to +override the BIOS setup or to provide more comprehensive features. The driver checks PCI SSID and looks through the static configuration table until any matching entry is found. If you have a new machine, @@ -130,44 +134,44 @@ you may see a message like below: ------------------------------------------------------------------------ hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... ------------------------------------------------------------------------ -Even if you such a message, DON'T PANIC. Take a deep breath (and keep -your towel). First of all, it's an informational message, no warning, -no error. This means that the PCI SSID of your device isn't listed in -the known preset model list. But, this doesn't mean that the driver -is broken. Many codec-driver provides the automatic configuration -based on the BIOS setup. +Even if you see such a message, DON'T PANIC. Take a deep breath and +keep your towel. First of all, it's an informational message, no +warning, no error. This means that the PCI SSID of your device isn't +listed in the known preset model (white-)list. But, this doesn't mean +that the driver is broken. Many codec-drivers provide the automatic +configuration mechanism based on the BIOS setup. The HD-audio codec has usually "pin" widgets, and BIOS sets the default configuration of each pin, which indicates the location, the connection type, the jack color, etc. The HD-audio driver can guess the right connection judging from these default configuration values. -However -- some codec support codes, such as patch_analog.c, don't +However -- some codec-support codes, such as patch_analog.c, don't support the automatic probing (yet as of 2.6.28). And, BIOS is often, yes, pretty often broken. It sets up wrong values and screws up the driver. -The preset model is provided basically to override such a situation. -When the matching preset model is found in the list, the driver +The preset model is provided basically to overcome such a situation. +When the matching preset model is found in the white-list, the driver assumes the static configuration of that preset and builds the mixer -and PCM based on the static information. Thus, if you have a newer -machine with a slightly different PCI SSID from the existing one, you -may have a good chance to re-use the same model. You can pass the -`model` option to specify the preset model instead of PCI SSID -look-up. +elements and PCM streams based on the static information. Thus, if +you have a newer machine with a slightly different PCI SSID from the +existing one, you may have a good chance to re-use the same model. +You can pass the `model` option to specify the preset model instead of +PCI SSID look-up. What `model` option values are available depends on the codec chip. Check your codec chip from the codec proc file (see "Codec Proc-File" section below). It will show the vendor/product name of your codec -chip. Then, see Documentation/sound/alsa/ALSA-Configuration.txt file. -In the section of HD-audio driver, you can find a list of codecs and -`model` options belonging to each codec. For example, for Realtek +chip. Then, see Documentation/sound/alsa/ALSA-Configuration.txt +file, the section of HD-audio driver. You can find a list of codecs +and `model` options belonging to each codec. For example, for Realtek ALC262 codec chip, pass `model=ultra` for devices that are compatible with Samsung Q1 Ultra. -Thus, the first thing you can do for any brand-new, unsupported -HD-audio hardware is to check HD-audio codec and several different -`model` option values. If you have a luck, some of them might suit -with your device well. +Thus, the first thing you can do for any brand-new, unsupported and +non-working HD-audio hardware is to check HD-audio codec and several +different `model` option values. If you have a luck, some of them +might suit with your device well. Some codecs such as ALC880 have a special model option `model=test`. This configures the driver to provide as many mixer controls as @@ -188,12 +192,14 @@ One of the most frequent (and obvious) bugs with HD-audio is the silent output from either or both of a built-in speaker and a headphone jack. In general, you should try a headphone output at first. A speaker output often requires more additional controls like -the amplifier. Thus a headphone output has a slightly better chance. +the external amplifier bits. Thus a headphone output has a slightly +better chance. Before making a bug report, double-check whether the mixer is set up correctly. The recent version of snd-hda-intel driver provides mostly -"Master" volume control as well as "Front" volume. In addition, there -are individual "Headphone" and "Speaker" controls. +"Master" volume control as well as "Front" volume (where Front +indicates the front-channels). In addition, there can be individual +"Headphone" and "Speaker" controls. Ditto for the speaker output. There can be "External Amplifier" switch on some codecs. Turn on this if present. @@ -214,7 +220,7 @@ following: external amplifier. This can be set usually via EAPD verb or a certain GPIO. If the codec pin supports EAPD, you have a better chance via SET_EAPD_BTL verb (0x70c). On others, GPIO pin (mostly - it's either GPIO0 or GPIO1) can turn on/off EAPD. + it's either GPIO0 or GPIO1) may turn on/off EAPD. - Some Realtek codecs require special vendor-specific coefficients to turn on the amplifier. See patch_realtek.c. - IDT codecs may have extra power-enable/disable controls on each @@ -227,29 +233,29 @@ following: Capture Problems ~~~~~~~~~~~~~~~~ -The capture problems are often missing setups of mixers. Thus, before -submitting a bug report, make sure that you set up the mixer -correctly. For example, both "Capture Volume" and "Capture Switch" -have to be set properly in addition to the right "Capture Source" or -"Input Source" selection. Some devices have "Mic Boost" volume or -switch. +The capture problems are often because of missing setups of mixers. +Thus, before submitting a bug report, make sure that you set up the +mixer correctly. For example, both "Capture Volume" and "Capture +Switch" have to be set properly in addition to the right "Capture +Source" or "Input Source" selection. Some devices have "Mic Boost" +volume or switch. When the PCM device is opened via "default" PCM (without pulse-audio plugin), you'll likely have "Digital Capture Volume" control as well. This is provided for the extra gain/attenuation of the signal in software, especially for the inputs without the hardware volume control such as digital microphones. Unless really needed, this -should be set to exactly 50%, corresponding to 0dB. When you use "hw" -PCM, i.e., a raw access PCM, this control will have no influence, -though. +should be set to exactly 50%, corresponding to 0dB -- neither extra +gain nor attenuation. When you use "hw" PCM, i.e., a raw access PCM, +this control will have no influence, though. It's known that some codecs / devices have fairly bad analog circuits, and the recorded sound contains a certain DC-offset. This is no bug of the driver. -Most of modern laptops have no analog CD-input connection. Thus, the +Most of modern laptops have no analog CD-input connection. Thus, the recording from CD input won't work in many cases although the driver -provides it as the capture source. +provides it as the capture source. Use CDDA instead. The automatic switching of the built-in and external mic per plugging is implemented on some codec models but not on every model. Partly @@ -264,7 +270,7 @@ to fight again the evil, try debugging via hitting the raw HD-audio codec verbs to the device. Some tools are available: hda-emu and hda-analyzer. The detailed description is found in the sections below. You'd need to enable hwdep for using these tools. See "Kernel -Configuration". +Configuration" section. OTHER ISSUES @@ -284,15 +290,16 @@ sure to want it. Don't forget to turn on the appropriate `CONFIG_SND_HDA_CODEC_*` options. Note that each of them corresponds to the codec chip, not the controller chip. Thus, even if lspci shows the Nvidia controller, -you may choose the option for other vendors. If you are unsure, just -choose all yes. +you may need to choose the option for other vendors. If you are +unsure, just select all yes. `CONFIG_SND_HDA_HWDEP` is a useful option for debugging the driver. When this is enabled, the driver creates hardware-dependent devices (one per each codec), and you have a raw access to the device via -hda-verb program. For example, `hwC0D2` will be created for the card -0 codec slot #2. For debug tools such as hda-verb and hda-analyzer, -the hwdep device has to be enabled. Thus, turn this on always. +these device files. For example, `hwC0D2` will be created for the +codec slot #2 of the first card (#0). For debug-tools such as +hda-verb and hda-analyzer, the hwdep device has to be enabled. +Thus, it'd be better to turn this on always. `CONFIG_SND_HDA_RECONFIG` is a new option, and this depends on the hwdep option above. When enabled, you'll have some sysfs files under @@ -436,7 +443,7 @@ details. hda-verb ~~~~~~~~ hda-verb is a tiny program that allows you to access the HD-audio -codec directly. It executes a HD-audio codec verb directly. +codec directly. You can execute a raw HD-audio codec verb with this. This program accesses the hwdep device, thus you need to enable the kernel config `CONFIG_SND_HDA_HWDEP=y` beforehand. @@ -486,7 +493,7 @@ hda-analyzer ~~~~~~~~~~~~ hda-analyzer provides a graphical interface to access the raw HD-audio control, based on pyGTK2 binding. It's a more powerful version of -hda-verb. The program gives you a easy-to-use GUI stuff for showing +hda-verb. The program gives you an easy-to-use GUI stuff for showing the widget information and adjusting the amp values, as well as the proc-compatible output. @@ -498,7 +505,7 @@ alsa-project.org: hda-emu ~~~~~~~ -hda-emu is a HD-audio emulator. The main purpose of this program is +hda-emu is an HD-audio emulator. The main purpose of this program is to debug an HD-audio codec without the real hardware. Thus, it doesn't emulate the behavior with the real audio I/O, but it just dumps the codec register changes and the ALSA-driver internal changes -- cgit v1.2.3 From 623b9f6738dee0394398564a74fdabbff00f506f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 11 Dec 2008 07:44:18 +0100 Subject: ALSA: hda - Update HD-Audio.txt MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixed typos and added a section about codecgraph. Thanks to Vedran Miletić and Daniel T Chen for suggestions. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index ca8187de52d8..ee9117eee1aa 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -266,7 +266,7 @@ submit the improvement patch to the author. Direct Debugging ~~~~~~~~~~~~~~~~ If no model option gives you a better result, and you are a touch guy -to fight again the evil, try debugging via hitting the raw HD-audio +to fight against evil, try debugging via hitting the raw HD-audio codec verbs to the device. Some tools are available: hda-emu and hda-analyzer. The detailed description is found in the sections below. You'd need to enable hwdep for using these tools. See "Kernel @@ -389,7 +389,7 @@ power-down/up depending on the device. Some of them might be solvable, but some are hard, I'm afraid. Some distros such as openSUSE enables the power-saving feature automatically when the power cable is unplugged. Thus, if you hear noises, suspect first the -power-saving. See /sys/modules/snd_hda_intel/parameters/power_save to +power-saving. See /sys/module/snd_hda_intel/parameters/power_save to check the current value. If it's non-zero, the feature is turned on. @@ -503,6 +503,19 @@ alsa-project.org: - http://git.alsa-project.org/?p=alsa.git;a=tree;f=hda-analyzer +Codecgraph +~~~~~~~~~~ +Codecgraph is a utility program to generate a graph and visualizes the +codec-node connection of a codec chip. It's especially useful when +you analyze or debug a codec without a proper datasheet. The program +parses the given codec proc file and converts to SVG via graphiz +program. + +The tarball and GIT trees are found in the web page at: + +- http://helllabs.org/codecgraph/ + + hda-emu ~~~~~~~ hda-emu is an HD-audio emulator. The main purpose of this program is -- cgit v1.2.3 From f8bbd06b17f16984328398cdecdf9302ef9bb0bf Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 11 Dec 2008 13:12:59 +0100 Subject: ALSA: hda - Fix another typo in HD-Audio.txt --- Documentation/sound/alsa/HD-Audio.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index ee9117eee1aa..2e4d031ea1fa 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -265,7 +265,7 @@ submit the improvement patch to the author. Direct Debugging ~~~~~~~~~~~~~~~~ -If no model option gives you a better result, and you are a touch guy +If no model option gives you a better result, and you are a tough guy to fight against evil, try debugging via hitting the raw HD-audio codec verbs to the device. Some tools are available: hda-emu and hda-analyzer. The detailed description is found in the sections -- cgit v1.2.3 From 132bb7c0efe82fc976b06d557f5d63536cb9fdaa Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 11 Dec 2008 15:39:52 +0100 Subject: ALSA: hda - Add development tree URLs in HD-audio.txt Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 2e4d031ea1fa..642a2b012541 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -393,6 +393,28 @@ power-saving. See /sys/module/snd_hda_intel/parameters/power_save to check the current value. If it's non-zero, the feature is turned on. +Development Tree +~~~~~~~~~~~~~~~~ +The latest development codes for HD-audio are found on sound git tree: + +- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git + +The master branch or for-next branches can be used as the main +development branches in general while the HD-audio specific patches +are committed in topic/hda branch. + +If you are using the latest Linus tree, it'd be better to pull the +above GIT tree onto it. If you are using the older kernels, an easy +way to try the latest ALSA code is to build from the snapshot +tarball. There are daily tarballs and the latest snapshot tarball. +All can be built just like normal alsa-driver release packages, that +is, installed via the usual spells: configure, make and make +install(-modules). See INSTALL in the package. The snapshot tarballs +are found at: + +- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/ + + Sending a Bug Report ~~~~~~~~~~~~~~~~~~~~ If any model or module options don't work for your device, it's time -- cgit v1.2.3 From 9470565579f29486f4ed0ffa50774268b64994b0 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 1 Dec 2008 14:13:50 -0800 Subject: x86: remove init_mm export as planned for 2.6.26 Impact: remove deprecated export Signed-off-by: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- Documentation/feature-removal-schedule.txt | 12 ------------ arch/x86/kernel/init_task.c | 1 - 2 files changed, 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index c28a2ac88f9d..1a8af7354e79 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -244,18 +244,6 @@ Who: Michael Buesch --------------------------- -What: init_mm export -When: 2.6.26 -Why: Not used in-tree. The current out-of-tree users used it to - work around problems in the CPA code which should be resolved - by now. One usecase was described to provide verification code - of the CPA operation. That's a good idea in general, but such - code / infrastructure should be in the kernel and not in some - out-of-tree driver. -Who: Thomas Gleixner - ----------------------------- - What: usedac i386 kernel parameter When: 2.6.27 Why: replaced by allowdac and no dac combination diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c index a4f93b4120c1..d39918076bb4 100644 --- a/arch/x86/kernel/init_task.c +++ b/arch/x86/kernel/init_task.c @@ -14,7 +14,6 @@ static struct fs_struct init_fs = INIT_FS; static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); struct mm_struct init_mm = INIT_MM(init_mm); -EXPORT_UNUSED_SYMBOL(init_mm); /* will be removed in 2.6.26 */ /* * Initial thread structure. -- cgit v1.2.3 From 1ada1441e73a0f51296bfae527acbeae61ff0d52 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 15 Dec 2008 03:09:15 +0100 Subject: [ARM] 5348/1: fix documentation wrt location of the alignment trap interface Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- Documentation/arm/mem_alignment | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/arm/mem_alignment b/Documentation/arm/mem_alignment index d145ccca169a..c7c7a114c78c 100644 --- a/Documentation/arm/mem_alignment +++ b/Documentation/arm/mem_alignment @@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user space, and might cause programs to fail unexpectedly. To change the alignment trap behavior, simply echo a number into -/proc/sys/debug/alignment. The number is made up from various bits: +/proc/cpu/alignment. The number is made up from various bits: bit behavior when set --- ----------------- -- cgit v1.2.3 From e1286f2c686f5976e0424bb6195ece25e7a17607 Mon Sep 17 00:00:00 2001 From: Philipp Kohlbecher Date: Sun, 14 Dec 2008 18:50:01 +0100 Subject: x86: documentation fix regarding boot protocol Impact: clarify documentation Documentation/x86/boot.txt describes payload_offset as the offset from the end of the real-mode code. In fact, it is more accurately described as the offset from the beginning of the protected-mode code, as (a) this is how it is actually calculated and (b) the padding after the real-mode code is not included in the offset. Signed-off-by: Philipp Kohlbecher Acked-by: Ian Campbell Acked-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- Documentation/x86/boot.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 804d9b1a46ef..fcdc62b3c3d8 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -537,8 +537,8 @@ Type: read Offset/size: 0x248/4 Protocol: 2.08+ - If non-zero then this field contains the offset from the end of the - real-mode code to the payload. + If non-zero then this field contains the offset from the beginning + of the protected-mode code to the payload. The payload may be compressed. The format of both the compressed and uncompressed data should be determined using the standard magic -- cgit v1.2.3 From b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Tue, 16 Dec 2008 15:29:15 -0800 Subject: gianfar: Convert gianfar to an of_platform_driver Does the same for the accompanying MDIO driver, and then modifies the TBI configuration method. The old way used fields in einfo, which no longer exists. The new way is to create an MDIO device-tree node for each instance of gianfar, and create a tbi-handle property to associate ethernet controllers with the TBI PHYs they are connected to. Signed-off-by: Andy Fleming Signed-off-by: David S. Miller --- Documentation/powerpc/dts-bindings/fsl/tsec.txt | 12 +- arch/powerpc/boot/dts/asp834x-redboot.dts | 20 ++ arch/powerpc/boot/dts/ksi8560.dts | 20 ++ arch/powerpc/boot/dts/mpc8313erdb.dts | 20 ++ arch/powerpc/boot/dts/mpc8315erdb.dts | 19 ++ arch/powerpc/boot/dts/mpc8349emitx.dts | 18 ++ arch/powerpc/boot/dts/mpc8349emitxgp.dts | 5 + arch/powerpc/boot/dts/mpc834x_mds.dts | 19 ++ arch/powerpc/boot/dts/mpc8377_mds.dts | 19 ++ arch/powerpc/boot/dts/mpc8377_rdb.dts | 19 ++ arch/powerpc/boot/dts/mpc8378_mds.dts | 19 ++ arch/powerpc/boot/dts/mpc8378_rdb.dts | 17 ++ arch/powerpc/boot/dts/mpc8379_mds.dts | 18 ++ arch/powerpc/boot/dts/mpc8379_rdb.dts | 18 ++ arch/powerpc/boot/dts/mpc8536ds.dts | 18 ++ arch/powerpc/boot/dts/mpc8540ads.dts | 31 +++ arch/powerpc/boot/dts/mpc8541cds.dts | 18 ++ arch/powerpc/boot/dts/mpc8544ds.dts | 20 ++ arch/powerpc/boot/dts/mpc8548cds.dts | 44 ++++ arch/powerpc/boot/dts/mpc8555cds.dts | 18 ++ arch/powerpc/boot/dts/mpc8560ads.dts | 18 ++ arch/powerpc/boot/dts/mpc8568mds.dts | 18 ++ arch/powerpc/boot/dts/mpc8572ds.dts | 45 ++++ arch/powerpc/boot/dts/mpc8641_hpcn.dts | 45 ++++ arch/powerpc/boot/dts/sbc8349.dts | 18 ++ arch/powerpc/boot/dts/sbc8548.dts | 18 ++ arch/powerpc/boot/dts/sbc8560.dts | 18 ++ arch/powerpc/boot/dts/sbc8641d.dts | 44 ++++ arch/powerpc/boot/dts/stx_gp3_8560.dts | 18 ++ arch/powerpc/boot/dts/tqm8540.dts | 28 +++ arch/powerpc/boot/dts/tqm8541.dts | 18 ++ arch/powerpc/boot/dts/tqm8548-bigflash.dts | 44 ++++ arch/powerpc/boot/dts/tqm8548.dts | 44 ++++ arch/powerpc/boot/dts/tqm8555.dts | 18 ++ arch/powerpc/boot/dts/tqm8560.dts | 18 ++ arch/powerpc/sysdev/fsl_soc.c | 241 +++--------------- drivers/net/gianfar.c | 321 ++++++++++++++++-------- drivers/net/gianfar.h | 21 +- drivers/net/gianfar_ethtool.c | 22 +- drivers/net/gianfar_mii.c | 212 +++++++++++----- drivers/net/gianfar_mii.h | 2 + include/linux/fsl_devices.h | 18 +- 42 files changed, 1217 insertions(+), 424 deletions(-) (limited to 'Documentation') diff --git a/Documentation/powerpc/dts-bindings/fsl/tsec.txt b/Documentation/powerpc/dts-bindings/fsl/tsec.txt index cf55fa4112d2..7fa4b27574b5 100644 --- a/Documentation/powerpc/dts-bindings/fsl/tsec.txt +++ b/Documentation/powerpc/dts-bindings/fsl/tsec.txt @@ -2,8 +2,8 @@ The MDIO is a bus to which the PHY devices are connected. For each device that exists on this bus, a child node should be created. See -the definition of the PHY node below for an example of how to define -a PHY. +the definition of the PHY node in booting-without-of.txt for an example +of how to define a PHY. Required properties: - reg : Offset and length of the register set for the device @@ -21,6 +21,14 @@ Example: }; }; +* TBI Internal MDIO bus + +As of this writing, every tsec is associated with an internal TBI PHY. +This PHY is accessed through the local MDIO bus. These buses are defined +similarly to the mdio buses, except they are compatible with "fsl,gianfar-tbi". +The TBI PHYs underneath them are similar to normal PHYs, but the reg property +is considered instructive, rather than descriptive. The reg property should +be chosen so it doesn't interfere with other PHYs on the bus. * Gianfar-compatible ethernet nodes diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts index 6235fca445de..524af7ef9f26 100644 --- a/arch/powerpc/boot/dts/asp834x-redboot.dts +++ b/arch/powerpc/boot/dts/asp834x-redboot.dts @@ -199,8 +199,26 @@ reg = <0x2>; device_type = "ethernet-phy"; }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; @@ -210,6 +228,7 @@ local-mac-address = [ 00 08 e5 11 32 33 ]; interrupts = <32 0x8 33 0x8 34 0x8>; interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; linux,network-index = <0>; }; @@ -223,6 +242,7 @@ local-mac-address = [ 00 08 e5 11 32 34 ]; interrupts = <35 0x8 36 0x8 37 0x8>; interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; linux,network-index = <1>; }; diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts index 49737589ffc8..3bfff47418db 100644 --- a/arch/powerpc/boot/dts/ksi8560.dts +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -141,8 +141,26 @@ reg = <0x2>; device_type = "ethernet-phy"; }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@24000 { device_type = "network"; model = "TSEC"; @@ -152,6 +170,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&PHY1>; }; @@ -164,6 +183,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&PHY2>; }; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 503031766825..d4df8b6857a4 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -190,6 +190,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 0x8 36 0x8 35 0x8>; interrupt-parent = <&ipic>; + tbi-handle = < &tbi0 >; phy-handle = < &phy1 >; fsl,magic-packet; @@ -210,6 +211,10 @@ reg = <0x4>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; }; @@ -222,9 +227,24 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <34 0x8 33 0x8 32 0x8>; interrupt-parent = <&ipic>; + tbi-handle = < &tbi1 >; phy-handle = < &phy4 >; sleep = <&pmc 0x10000000>; fsl,magic-packet; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 6b850670de1d..d2cdd47a246d 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -206,8 +206,25 @@ reg = <0x1>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; + enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; @@ -217,6 +234,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; phy-handle = < &phy0 >; }; @@ -229,6 +247,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; phy-handle = < &phy1 >; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 4bdbaf4993a1..712783d0707e 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -184,6 +184,22 @@ reg = <0x1c>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -195,6 +211,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; phy-handle = <&phy1c>; linux,network-index = <0>; }; @@ -211,6 +228,7 @@ /* Vitesse 7385 isn't on the MDIO bus */ fixed-link = <1 1 1000 0 0>; linux,network-index = <1>; + tbi-handle = <&tbi1>; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index fa40647ee62e..3e918af41fb1 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -163,6 +163,10 @@ reg = <0x1c>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -174,6 +178,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; phy-handle = <&phy1c>; linux,network-index = <0>; }; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index c986c541e9bb..d9adba01c09c 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -185,8 +185,25 @@ reg = <0x1>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; + enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; @@ -196,6 +213,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; linux,network-index = <0>; }; @@ -209,6 +227,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; linux,network-index = <1>; }; diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 0484561bd2c0..1d14d7052e6d 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -193,8 +193,25 @@ reg = <0x3>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; + enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; @@ -205,6 +222,7 @@ interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; @@ -218,6 +236,7 @@ interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; phy-handle = <&phy3>; }; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 435ef3dd022d..31f348fdfe14 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -211,8 +211,25 @@ reg = <0x2>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; + enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; @@ -223,6 +240,7 @@ interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; @@ -237,6 +255,7 @@ phy-connection-type = "mii"; interrupt-parent = <&ipic>; fixed-link = <1 1 1000 0 0>; + tbi-handle = <&tbi1>; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 67a08d2e2ff2..b85fc02682d2 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -232,8 +232,25 @@ reg = <0x3>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; + enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; @@ -244,6 +261,7 @@ interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; @@ -257,6 +275,7 @@ interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; phy-handle = <&phy3>; }; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index b11e68f56a06..7a2bad038bd6 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -211,8 +211,25 @@ reg = <0x2>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; + enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index 323370a2b5ff..acf06c438dbf 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -232,6 +232,22 @@ reg = <0x3>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -244,6 +260,7 @@ interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; @@ -257,6 +274,7 @@ interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; phy-handle = <&phy3>; }; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 337af6ea26d3..e067616f3f42 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -211,6 +211,22 @@ reg = <0x2>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -223,6 +239,7 @@ interrupts = <32 0x8 33 0x8 34 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; @@ -237,6 +254,7 @@ phy-connection-type = "mii"; interrupt-parent = <&ipic>; fixed-link = <1 1 1000 0 0>; + tbi-handle = <&tbi1>; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 35db1e5440c7..3c905df1812c 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -155,6 +155,22 @@ reg = <1>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; usb@22000 { @@ -186,6 +202,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; }; @@ -199,6 +216,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; }; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 9568bfaff8f7..79570ffe41b9 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -150,6 +150,34 @@ reg = <0x3>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -161,6 +189,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; }; @@ -173,6 +202,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; }; @@ -185,6 +215,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <41 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; phy-handle = <&phy3>; }; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 6480f4fd96e0..221036a8ce23 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -144,6 +144,22 @@ reg = <0x1>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -155,6 +171,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; }; @@ -167,6 +184,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; }; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index f1fb20737e3e..b9da42105066 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -116,8 +116,26 @@ reg = <0x1>; device_type = "ethernet-phy"; }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + dma@21300 { #address-cells = <1>; #size-cells = <1>; @@ -169,6 +187,7 @@ interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; + tbi-handle = <&tbi0>; phy-connection-type = "rgmii-id"; }; @@ -182,6 +201,7 @@ interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; + tbi-handle = <&tbi1>; phy-connection-type = "rgmii-id"; }; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 431b496270dc..df774a7088ff 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -172,6 +172,46 @@ reg = <0x3>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@27520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x27520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -183,6 +223,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; }; @@ -195,6 +236,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; }; @@ -208,6 +250,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; phy-handle = <&phy2>; }; @@ -220,6 +263,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; phy-handle = <&phy3>; }; */ diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index d833a5c4f476..053b01e1c93b 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -144,6 +144,22 @@ reg = <0x1>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -155,6 +171,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; }; @@ -167,6 +184,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; }; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 4d1f2f284094..11b1bcbe14ce 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -145,6 +145,22 @@ reg = <0x3>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -156,6 +172,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; }; @@ -168,6 +185,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; }; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index c80158f7741d..1955bd9e113d 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -179,6 +179,22 @@ reg = <0x3>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -190,6 +206,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; @@ -202,6 +219,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy3>; }; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index 5c69b2fafd32..05f67253b49f 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -225,6 +225,47 @@ interrupts = <10 1>; reg = <0x3>; }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@27520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x27520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -236,6 +277,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; }; @@ -249,6 +291,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; }; @@ -262,6 +305,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; }; @@ -275,6 +319,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; }; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index d665e767822a..35d5e248ccd7 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -205,8 +205,49 @@ reg = <3>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@27520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x27520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; + enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; @@ -216,6 +257,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; }; @@ -229,6 +271,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; }; @@ -242,6 +285,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; }; @@ -255,6 +299,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; }; diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index 0f941f310e44..8d365a57ebc1 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -177,6 +177,22 @@ reg = <0x1a>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -188,6 +204,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 0x8 33 0x8 34 0x8>; interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; linux,network-index = <0>; }; @@ -201,6 +218,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 0x8 36 0x8 37 0x8>; interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; linux,network-index = <1>; }; diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 333552b4e90d..2baf4a51f224 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -252,6 +252,22 @@ reg = <0x1a>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -263,6 +279,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; }; @@ -275,6 +292,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; }; diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts index db3632ef9888..01542f7062ab 100644 --- a/arch/powerpc/boot/dts/sbc8560.dts +++ b/arch/powerpc/boot/dts/sbc8560.dts @@ -168,6 +168,22 @@ reg = <0x1c>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -179,6 +195,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; }; @@ -191,6 +208,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; }; diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts index 9652456158fb..36db981548e4 100644 --- a/arch/powerpc/boot/dts/sbc8641d.dts +++ b/arch/powerpc/boot/dts/sbc8641d.dts @@ -222,6 +222,46 @@ reg = <2>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@27520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x27520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -233,6 +273,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; }; @@ -246,6 +287,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; }; @@ -259,6 +301,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; }; @@ -272,6 +315,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; }; diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts index fcd1db6ca0a8..fff33fe6efc6 100644 --- a/arch/powerpc/boot/dts/stx_gp3_8560.dts +++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts @@ -142,6 +142,22 @@ reg = <4>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -153,6 +169,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; @@ -165,6 +182,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy4>; }; diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index e1d260b9085e..a693f01c21aa 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -155,6 +155,34 @@ reg = <3>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index d76441ec5dc7..9e3f5f0dde20 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -154,6 +154,22 @@ reg = <3>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -165,6 +181,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; @@ -177,6 +194,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; }; diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index 4199e89b4e50..15086eb65c50 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -179,6 +179,46 @@ reg = <5>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@27520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x27520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -190,6 +230,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; @@ -202,6 +243,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; }; @@ -214,6 +256,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; phy-handle = <&phy3>; }; @@ -226,6 +269,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; phy-handle = <&phy4>; }; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index 58ee4185454b..b7b65f5e79b6 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -179,6 +179,46 @@ reg = <5>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@27520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x27520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -190,6 +230,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; @@ -202,6 +243,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; }; @@ -214,6 +256,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; phy-handle = <&phy3>; }; @@ -226,6 +269,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; phy-handle = <&phy4>; }; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index 6f7ea59c4846..cf92b4e7945e 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -154,6 +154,22 @@ reg = <3>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -165,6 +181,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; @@ -177,6 +194,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; }; diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index 3fe35208907b..9e1ab2d2f669 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -156,6 +156,22 @@ reg = <3>; device_type = "ethernet-phy"; }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; enet0: ethernet@24000 { @@ -167,6 +183,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&phy2>; }; @@ -179,6 +196,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&phy1>; }; diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 26ecb96f9731..115cb16351fd 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -207,236 +207,51 @@ static int __init of_add_fixed_phys(void) arch_initcall(of_add_fixed_phys); #endif /* CONFIG_FIXED_PHY */ -static int gfar_mdio_of_init_one(struct device_node *np) -{ - int k; - struct device_node *child = NULL; - struct gianfar_mdio_data mdio_data; - struct platform_device *mdio_dev; - struct resource res; - int ret; - - memset(&res, 0, sizeof(res)); - memset(&mdio_data, 0, sizeof(mdio_data)); - - ret = of_address_to_resource(np, 0, &res); - if (ret) - return ret; - - /* The gianfar device will try to use the same ID created below to find - * this bus, to coordinate register access (since they share). */ - mdio_dev = platform_device_register_simple("fsl-gianfar_mdio", - res.start&0xfffff, &res, 1); - if (IS_ERR(mdio_dev)) - return PTR_ERR(mdio_dev); - - for (k = 0; k < 32; k++) - mdio_data.irq[k] = PHY_POLL; - - while ((child = of_get_next_child(np, child)) != NULL) { - int irq = irq_of_parse_and_map(child, 0); - if (irq != NO_IRQ) { - const u32 *id = of_get_property(child, "reg", NULL); - mdio_data.irq[*id] = irq; - } - } - - ret = platform_device_add_data(mdio_dev, &mdio_data, - sizeof(struct gianfar_mdio_data)); - if (ret) - platform_device_unregister(mdio_dev); - - return ret; -} - -static int __init gfar_mdio_of_init(void) -{ - struct device_node *np = NULL; - - for_each_compatible_node(np, NULL, "fsl,gianfar-mdio") - gfar_mdio_of_init_one(np); - - /* try the deprecated version */ - for_each_compatible_node(np, "mdio", "gianfar"); - gfar_mdio_of_init_one(np); - - return 0; -} - -arch_initcall(gfar_mdio_of_init); - -static const char *gfar_tx_intr = "tx"; -static const char *gfar_rx_intr = "rx"; -static const char *gfar_err_intr = "error"; - -static int __init gfar_of_init(void) +#ifdef CONFIG_PPC_83xx +static int __init mpc83xx_wdt_init(void) { + struct resource r; struct device_node *np; - unsigned int i; - struct platform_device *gfar_dev; - struct resource res; + struct platform_device *dev; + u32 freq = fsl_get_sys_freq(); int ret; - for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "network", "gianfar")) != NULL; - i++) { - struct resource r[4]; - struct device_node *phy, *mdio; - struct gianfar_platform_data gfar_data; - const unsigned int *id; - const char *model; - const char *ctype; - const void *mac_addr; - const phandle *ph; - int n_res = 2; - - if (!of_device_is_available(np)) - continue; - - memset(r, 0, sizeof(r)); - memset(&gfar_data, 0, sizeof(gfar_data)); - - ret = of_address_to_resource(np, 0, &r[0]); - if (ret) - goto err; - - of_irq_to_resource(np, 0, &r[1]); - - model = of_get_property(np, "model", NULL); - - /* If we aren't the FEC we have multiple interrupts */ - if (model && strcasecmp(model, "FEC")) { - r[1].name = gfar_tx_intr; - - r[2].name = gfar_rx_intr; - of_irq_to_resource(np, 1, &r[2]); + np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt"); - r[3].name = gfar_err_intr; - of_irq_to_resource(np, 2, &r[3]); - - n_res += 2; - } - - gfar_dev = - platform_device_register_simple("fsl-gianfar", i, &r[0], - n_res); - - if (IS_ERR(gfar_dev)) { - ret = PTR_ERR(gfar_dev); - goto err; - } - - mac_addr = of_get_mac_address(np); - if (mac_addr) - memcpy(gfar_data.mac_addr, mac_addr, 6); - - if (model && !strcasecmp(model, "TSEC")) - gfar_data.device_flags = - FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | - FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR; - if (model && !strcasecmp(model, "eTSEC")) - gfar_data.device_flags = - FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | - FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR | - FSL_GIANFAR_DEV_HAS_CSUM | - FSL_GIANFAR_DEV_HAS_VLAN | - FSL_GIANFAR_DEV_HAS_EXTENDED_HASH; - - ctype = of_get_property(np, "phy-connection-type", NULL); - - /* We only care about rgmii-id. The rest are autodetected */ - if (ctype && !strcmp(ctype, "rgmii-id")) - gfar_data.interface = PHY_INTERFACE_MODE_RGMII_ID; - else - gfar_data.interface = PHY_INTERFACE_MODE_MII; - - if (of_get_property(np, "fsl,magic-packet", NULL)) - gfar_data.device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET; - - ph = of_get_property(np, "phy-handle", NULL); - if (ph == NULL) { - u32 *fixed_link; - - fixed_link = (u32 *)of_get_property(np, "fixed-link", - NULL); - if (!fixed_link) { - ret = -ENODEV; - goto unreg; - } - - snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "0"); - gfar_data.phy_id = fixed_link[0]; - } else { - phy = of_find_node_by_phandle(*ph); - - if (phy == NULL) { - ret = -ENODEV; - goto unreg; - } - - mdio = of_get_parent(phy); - - id = of_get_property(phy, "reg", NULL); - ret = of_address_to_resource(mdio, 0, &res); - if (ret) { - of_node_put(phy); - of_node_put(mdio); - goto unreg; - } - - gfar_data.phy_id = *id; - snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx", - (unsigned long long)res.start&0xfffff); + if (!np) { + ret = -ENODEV; + goto nodev; + } - of_node_put(phy); - of_node_put(mdio); - } + memset(&r, 0, sizeof(r)); - /* Get MDIO bus controlled by this eTSEC, if any. Normally only - * eTSEC 1 will control an MDIO bus, not necessarily the same - * bus that its PHY is on ('mdio' above), so we can't just use - * that. What we do is look for a gianfar mdio device that has - * overlapping registers with this device. That's really the - * whole point, to find the device sharing our registers to - * coordinate access with it. - */ - for_each_compatible_node(mdio, NULL, "fsl,gianfar-mdio") { - if (of_address_to_resource(mdio, 0, &res)) - continue; - - if (res.start >= r[0].start && res.end <= r[0].end) { - /* Get the ID the mdio bus platform device was - * registered with. gfar_data.bus_id is - * different because it's for finding a PHY, - * while this is for finding a MII bus. - */ - gfar_data.mdio_bus = res.start&0xfffff; - of_node_put(mdio); - break; - } - } + ret = of_address_to_resource(np, 0, &r); + if (ret) + goto err; - ret = - platform_device_add_data(gfar_dev, &gfar_data, - sizeof(struct - gianfar_platform_data)); - if (ret) - goto unreg; + dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1); + if (IS_ERR(dev)) { + ret = PTR_ERR(dev); + goto err; } + ret = platform_device_add_data(dev, &freq, sizeof(freq)); + if (ret) + goto unreg; + + of_node_put(np); return 0; unreg: - platform_device_unregister(gfar_dev); + platform_device_unregister(dev); err: + of_node_put(np); +nodev: return ret; } -arch_initcall(gfar_of_init); +arch_initcall(mpc83xx_wdt_init); +#endif static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type) { diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 55e319fa7fe6..7398704c4b55 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -25,11 +25,8 @@ * * Theory of operation * - * The driver is initialized through platform_device. Structures which - * define the configuration needed by the board are defined in a - * board structure in arch/ppc/platforms (though I do not - * discount the possibility that other architectures could one - * day be supported. + * The driver is initialized through of_device. Configuration information + * is therefore conveyed through an OF-style device tree. * * The Gianfar Ethernet Controller uses a ring of buffer * descriptors. The beginning is indicated by a register @@ -78,7 +75,7 @@ #include #include #include -#include +#include #include #include #include @@ -92,6 +89,8 @@ #include #include #include +#include +#include #include "gianfar.h" #include "gianfar_mii.h" @@ -119,8 +118,9 @@ static irqreturn_t gfar_interrupt(int irq, void *dev_id); static void adjust_link(struct net_device *dev); static void init_registers(struct net_device *dev); static int init_phy(struct net_device *dev); -static int gfar_probe(struct platform_device *pdev); -static int gfar_remove(struct platform_device *pdev); +static int gfar_probe(struct of_device *ofdev, + const struct of_device_id *match); +static int gfar_remove(struct of_device *ofdev); static void free_skb_resources(struct gfar_private *priv); static void gfar_set_multi(struct net_device *dev); static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr); @@ -152,25 +152,158 @@ static inline int gfar_uses_fcb(struct gfar_private *priv) return (priv->vlan_enable || priv->rx_csum_enable); } +static int gfar_of_init(struct net_device *dev) +{ + struct device_node *phy, *mdio; + const unsigned int *id; + const char *model; + const char *ctype; + const void *mac_addr; + const phandle *ph; + u64 addr, size; + int err = 0; + struct gfar_private *priv = netdev_priv(dev); + struct device_node *np = priv->node; + char bus_name[MII_BUS_ID_SIZE]; + + if (!np || !of_device_is_available(np)) + return -ENODEV; + + /* get a pointer to the register memory */ + addr = of_translate_address(np, of_get_address(np, 0, &size, NULL)); + priv->regs = ioremap(addr, size); + + if (priv->regs == NULL) + return -ENOMEM; + + priv->interruptTransmit = irq_of_parse_and_map(np, 0); + + model = of_get_property(np, "model", NULL); + + /* If we aren't the FEC we have multiple interrupts */ + if (model && strcasecmp(model, "FEC")) { + priv->interruptReceive = irq_of_parse_and_map(np, 1); + + priv->interruptError = irq_of_parse_and_map(np, 2); + + if (priv->interruptTransmit < 0 || + priv->interruptReceive < 0 || + priv->interruptError < 0) { + err = -EINVAL; + goto err_out; + } + } + + mac_addr = of_get_mac_address(np); + if (mac_addr) + memcpy(dev->dev_addr, mac_addr, MAC_ADDR_LEN); + + if (model && !strcasecmp(model, "TSEC")) + priv->device_flags = + FSL_GIANFAR_DEV_HAS_GIGABIT | + FSL_GIANFAR_DEV_HAS_COALESCE | + FSL_GIANFAR_DEV_HAS_RMON | + FSL_GIANFAR_DEV_HAS_MULTI_INTR; + if (model && !strcasecmp(model, "eTSEC")) + priv->device_flags = + FSL_GIANFAR_DEV_HAS_GIGABIT | + FSL_GIANFAR_DEV_HAS_COALESCE | + FSL_GIANFAR_DEV_HAS_RMON | + FSL_GIANFAR_DEV_HAS_MULTI_INTR | + FSL_GIANFAR_DEV_HAS_CSUM | + FSL_GIANFAR_DEV_HAS_VLAN | + FSL_GIANFAR_DEV_HAS_MAGIC_PACKET | + FSL_GIANFAR_DEV_HAS_EXTENDED_HASH; + + ctype = of_get_property(np, "phy-connection-type", NULL); + + /* We only care about rgmii-id. The rest are autodetected */ + if (ctype && !strcmp(ctype, "rgmii-id")) + priv->interface = PHY_INTERFACE_MODE_RGMII_ID; + else + priv->interface = PHY_INTERFACE_MODE_MII; + + if (of_get_property(np, "fsl,magic-packet", NULL)) + priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET; + + ph = of_get_property(np, "phy-handle", NULL); + if (ph == NULL) { + u32 *fixed_link; + + fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL); + if (!fixed_link) { + err = -ENODEV; + goto err_out; + } + + snprintf(priv->phy_bus_id, BUS_ID_SIZE, PHY_ID_FMT, "0", + fixed_link[0]); + } else { + phy = of_find_node_by_phandle(*ph); + + if (phy == NULL) { + err = -ENODEV; + goto err_out; + } + + mdio = of_get_parent(phy); + + id = of_get_property(phy, "reg", NULL); + + of_node_put(phy); + of_node_put(mdio); + + gfar_mdio_bus_name(bus_name, mdio); + snprintf(priv->phy_bus_id, BUS_ID_SIZE, "%s:%02x", + bus_name, *id); + } + + /* Find the TBI PHY. If it's not there, we don't support SGMII */ + ph = of_get_property(np, "tbi-handle", NULL); + if (ph) { + struct device_node *tbi = of_find_node_by_phandle(*ph); + struct of_device *ofdev; + struct mii_bus *bus; + + if (!tbi) + return 0; + + mdio = of_get_parent(tbi); + if (!mdio) + return 0; + + ofdev = of_find_device_by_node(mdio); + + of_node_put(mdio); + + id = of_get_property(tbi, "reg", NULL); + if (!id) + return 0; + + of_node_put(tbi); + + bus = dev_get_drvdata(&ofdev->dev); + + priv->tbiphy = bus->phy_map[*id]; + } + + return 0; + +err_out: + iounmap(priv->regs); + return err; +} + /* Set up the ethernet device structure, private data, * and anything else we need before we start */ -static int gfar_probe(struct platform_device *pdev) +static int gfar_probe(struct of_device *ofdev, + const struct of_device_id *match) { u32 tempval; struct net_device *dev = NULL; struct gfar_private *priv = NULL; - struct gianfar_platform_data *einfo; - struct resource *r; - int err = 0, irq; - - einfo = (struct gianfar_platform_data *) pdev->dev.platform_data; - - if (NULL == einfo) { - printk(KERN_ERR "gfar %d: Missing additional data!\n", - pdev->id); - - return -ENODEV; - } + int err = 0; + DECLARE_MAC_BUF(mac); /* Create an ethernet device instance */ dev = alloc_etherdev(sizeof (*priv)); @@ -180,48 +313,19 @@ static int gfar_probe(struct platform_device *pdev) priv = netdev_priv(dev); priv->dev = dev; + priv->node = ofdev->node; - /* Set the info in the priv to the current info */ - priv->einfo = einfo; - - /* fill out IRQ fields */ - if (einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { - irq = platform_get_irq_byname(pdev, "tx"); - if (irq < 0) - goto regs_fail; - priv->interruptTransmit = irq; - - irq = platform_get_irq_byname(pdev, "rx"); - if (irq < 0) - goto regs_fail; - priv->interruptReceive = irq; - - irq = platform_get_irq_byname(pdev, "error"); - if (irq < 0) - goto regs_fail; - priv->interruptError = irq; - } else { - irq = platform_get_irq(pdev, 0); - if (irq < 0) - goto regs_fail; - priv->interruptTransmit = irq; - } - - /* get a pointer to the register memory */ - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->regs = ioremap(r->start, sizeof (struct gfar)); + err = gfar_of_init(dev); - if (NULL == priv->regs) { - err = -ENOMEM; + if (err) goto regs_fail; - } spin_lock_init(&priv->txlock); spin_lock_init(&priv->rxlock); spin_lock_init(&priv->bflock); INIT_WORK(&priv->reset_task, gfar_reset_task); - platform_set_drvdata(pdev, dev); + dev_set_drvdata(&ofdev->dev, priv); /* Stop the DMA engine now, in case it was running before */ /* (The firmware could have used it, and left it running). */ @@ -239,13 +343,10 @@ static int gfar_probe(struct platform_device *pdev) /* Initialize ECNTRL */ gfar_write(&priv->regs->ecntrl, ECNTRL_INIT_SETTINGS); - /* Copy the station address into the dev structure, */ - memcpy(dev->dev_addr, einfo->mac_addr, MAC_ADDR_LEN); - /* Set the dev->base_addr to the gfar reg region */ dev->base_addr = (unsigned long) (priv->regs); - SET_NETDEV_DEV(dev, &pdev->dev); + SET_NETDEV_DEV(dev, &ofdev->dev); /* Fill in the dev structure */ dev->open = gfar_enet_open; @@ -263,7 +364,7 @@ static int gfar_probe(struct platform_device *pdev) dev->ethtool_ops = &gfar_ethtool_ops; - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) { + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) { priv->rx_csum_enable = 1; dev->features |= NETIF_F_IP_CSUM; } else @@ -271,7 +372,7 @@ static int gfar_probe(struct platform_device *pdev) priv->vlgrp = NULL; - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) { + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) { dev->vlan_rx_register = gfar_vlan_rx_register; dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; @@ -279,7 +380,7 @@ static int gfar_probe(struct platform_device *pdev) priv->vlan_enable = 1; } - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) { + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) { priv->extended_hash = 1; priv->hash_width = 9; @@ -314,7 +415,7 @@ static int gfar_probe(struct platform_device *pdev) priv->hash_regs[7] = &priv->regs->gaddr7; } - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_PADDING) + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_PADDING) priv->padding = DEFAULT_PADDING; else priv->padding = 0; @@ -368,29 +469,28 @@ regs_fail: return err; } -static int gfar_remove(struct platform_device *pdev) +static int gfar_remove(struct of_device *ofdev) { - struct net_device *dev = platform_get_drvdata(pdev); - struct gfar_private *priv = netdev_priv(dev); + struct gfar_private *priv = dev_get_drvdata(&ofdev->dev); - platform_set_drvdata(pdev, NULL); + dev_set_drvdata(&ofdev->dev, NULL); iounmap(priv->regs); - free_netdev(dev); + free_netdev(priv->dev); return 0; } #ifdef CONFIG_PM -static int gfar_suspend(struct platform_device *pdev, pm_message_t state) +static int gfar_suspend(struct of_device *ofdev, pm_message_t state) { - struct net_device *dev = platform_get_drvdata(pdev); - struct gfar_private *priv = netdev_priv(dev); + struct gfar_private *priv = dev_get_drvdata(&ofdev->dev); + struct net_device *dev = priv->dev; unsigned long flags; u32 tempval; int magic_packet = priv->wol_en && - (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET); + (priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET); netif_device_detach(dev); @@ -431,14 +531,14 @@ static int gfar_suspend(struct platform_device *pdev, pm_message_t state) return 0; } -static int gfar_resume(struct platform_device *pdev) +static int gfar_resume(struct of_device *ofdev) { - struct net_device *dev = platform_get_drvdata(pdev); - struct gfar_private *priv = netdev_priv(dev); + struct gfar_private *priv = dev_get_drvdata(&ofdev->dev); + struct net_device *dev = priv->dev; unsigned long flags; u32 tempval; int magic_packet = priv->wol_en && - (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET); + (priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET); if (!netif_running(dev)) { netif_device_attach(dev); @@ -497,7 +597,7 @@ static phy_interface_t gfar_get_interface(struct net_device *dev) if (ecntrl & ECNTRL_REDUCED_MII_MODE) return PHY_INTERFACE_MODE_RMII; else { - phy_interface_t interface = priv->einfo->interface; + phy_interface_t interface = priv->interface; /* * This isn't autodetected right now, so it must @@ -510,7 +610,7 @@ static phy_interface_t gfar_get_interface(struct net_device *dev) } } - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT) + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT) return PHY_INTERFACE_MODE_GMII; return PHY_INTERFACE_MODE_MII; @@ -524,21 +624,18 @@ static int init_phy(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); uint gigabit_support = - priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? + priv->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? SUPPORTED_1000baseT_Full : 0; struct phy_device *phydev; - char phy_id[BUS_ID_SIZE]; phy_interface_t interface; priv->oldlink = 0; priv->oldspeed = 0; priv->oldduplex = -1; - snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id); - interface = gfar_get_interface(dev); - phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface); + phydev = phy_connect(dev, priv->phy_bus_id, &adjust_link, 0, interface); if (interface == PHY_INTERFACE_MODE_SGMII) gfar_configure_serdes(dev); @@ -569,35 +666,31 @@ static int init_phy(struct net_device *dev) static void gfar_configure_serdes(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); - struct gfar_mii __iomem *regs = - (void __iomem *)&priv->regs->gfar_mii_regs; - int tbipa = gfar_read(&priv->regs->tbipa); - struct mii_bus *bus = gfar_get_miibus(priv); - if (bus) - mutex_lock(&bus->mdio_lock); + if (!priv->tbiphy) { + printk(KERN_WARNING "SGMII mode requires that the device " + "tree specify a tbi-handle\n"); + return; + } - /* If the link is already up, we must already be ok, and don't need to + /* + * If the link is already up, we must already be ok, and don't need to * configure and reset the TBI<->SerDes link. Maybe U-Boot configured * everything for us? Resetting it takes the link down and requires * several seconds for it to come back. */ - if (gfar_local_mdio_read(regs, tbipa, MII_BMSR) & BMSR_LSTATUS) - goto done; + if (phy_read(priv->tbiphy, MII_BMSR) & BMSR_LSTATUS) + return; /* Single clk mode, mii mode off(for serdes communication) */ - gfar_local_mdio_write(regs, tbipa, MII_TBICON, TBICON_CLK_SELECT); + phy_write(priv->tbiphy, MII_TBICON, TBICON_CLK_SELECT); - gfar_local_mdio_write(regs, tbipa, MII_ADVERTISE, + phy_write(priv->tbiphy, MII_ADVERTISE, ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM); - gfar_local_mdio_write(regs, tbipa, MII_BMCR, BMCR_ANENABLE | + phy_write(priv->tbiphy, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000); - - done: - if (bus) - mutex_unlock(&bus->mdio_lock); } static void init_registers(struct net_device *dev) @@ -630,7 +723,7 @@ static void init_registers(struct net_device *dev) gfar_write(&priv->regs->gaddr7, 0); /* Zero out the rmon mib registers if it has them */ - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) { + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) { memset_io(&(priv->regs->rmon), 0, sizeof (struct rmon_mib)); /* Mask off the CAM interrupts */ @@ -705,7 +798,7 @@ void stop_gfar(struct net_device *dev) spin_unlock_irqrestore(&priv->txlock, flags); /* Free the IRQs */ - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { free_irq(priv->interruptError, dev); free_irq(priv->interruptTransmit, dev); free_irq(priv->interruptReceive, dev); @@ -919,7 +1012,7 @@ int startup_gfar(struct net_device *dev) /* If the device has multiple interrupts, register for * them. Otherwise, only register for the one */ - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { /* Install our interrupt handlers for Error, * Transmit, and Receive */ if (request_irq(priv->interruptError, gfar_error, @@ -1751,7 +1844,7 @@ static void gfar_netpoll(struct net_device *dev) struct gfar_private *priv = netdev_priv(dev); /* If the device has multiple interrupts, run tx/rx */ - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) { disable_irq(priv->interruptTransmit); disable_irq(priv->interruptReceive); disable_irq(priv->interruptError); @@ -2045,7 +2138,7 @@ static irqreturn_t gfar_error(int irq, void *dev_id) gfar_write(&priv->regs->ievent, events & IEVENT_ERR_MASK); /* Magic Packet is not an error. */ - if ((priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) && + if ((priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) && (events & IEVENT_MAG)) events &= ~IEVENT_MAG; @@ -2111,16 +2204,24 @@ static irqreturn_t gfar_error(int irq, void *dev_id) /* work with hotplug and coldplug */ MODULE_ALIAS("platform:fsl-gianfar"); +static struct of_device_id gfar_match[] = +{ + { + .type = "network", + .compatible = "gianfar", + }, + {}, +}; + /* Structure for a device driver */ -static struct platform_driver gfar_driver = { +static struct of_platform_driver gfar_driver = { + .name = "fsl-gianfar", + .match_table = gfar_match, + .probe = gfar_probe, .remove = gfar_remove, .suspend = gfar_suspend, .resume = gfar_resume, - .driver = { - .name = "fsl-gianfar", - .owner = THIS_MODULE, - }, }; static int __init gfar_init(void) @@ -2130,7 +2231,7 @@ static int __init gfar_init(void) if (err) return err; - err = platform_driver_register(&gfar_driver); + err = of_register_platform_driver(&gfar_driver); if (err) gfar_mdio_exit(); @@ -2140,7 +2241,7 @@ static int __init gfar_init(void) static void __exit gfar_exit(void) { - platform_driver_unregister(&gfar_driver); + of_unregister_platform_driver(&gfar_driver); gfar_mdio_exit(); } diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index f46e9b63af13..ca7f0a6a68c5 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -657,6 +657,19 @@ struct gfar { }; +/* Flags related to gianfar device features */ +#define FSL_GIANFAR_DEV_HAS_GIGABIT 0x00000001 +#define FSL_GIANFAR_DEV_HAS_COALESCE 0x00000002 +#define FSL_GIANFAR_DEV_HAS_RMON 0x00000004 +#define FSL_GIANFAR_DEV_HAS_MULTI_INTR 0x00000008 +#define FSL_GIANFAR_DEV_HAS_CSUM 0x00000010 +#define FSL_GIANFAR_DEV_HAS_VLAN 0x00000020 +#define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH 0x00000040 +#define FSL_GIANFAR_DEV_HAS_PADDING 0x00000080 +#define FSL_GIANFAR_DEV_HAS_MAGIC_PACKET 0x00000100 +#define FSL_GIANFAR_DEV_HAS_BD_STASHING 0x00000200 +#define FSL_GIANFAR_DEV_HAS_BUF_STASHING 0x00000400 + /* Struct stolen almost completely (and shamelessly) from the FCC enet source * (Ok, that's not so true anymore, but there is a family resemblence) * The GFAR buffer descriptors track the ring buffers. The rx_bd_base @@ -694,6 +707,7 @@ struct gfar_private { /* RX Locked fields */ spinlock_t rxlock; + struct device_node *node; struct net_device *dev; struct napi_struct napi; @@ -733,6 +747,9 @@ struct gfar_private { /* Bitfield update lock */ spinlock_t bflock; + phy_interface_t interface; + char phy_bus_id[BUS_ID_SIZE]; + u32 device_flags; unsigned char vlan_enable:1, rx_csum_enable:1, extended_hash:1, @@ -744,11 +761,9 @@ struct gfar_private { unsigned int interruptReceive; unsigned int interruptError; - /* info structure initialized by platform code */ - struct gianfar_platform_data *einfo; - /* PHY stuff */ struct phy_device *phydev; + struct phy_device *tbiphy; struct mii_bus *mii_bus; int oldspeed; int oldduplex; diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index fb7d3ccc0fdc..53944b120a3d 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -121,7 +121,7 @@ static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf) { struct gfar_private *priv = netdev_priv(dev); - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) memcpy(buf, stat_gstrings, GFAR_STATS_LEN * ETH_GSTRING_LEN); else memcpy(buf, stat_gstrings, @@ -138,7 +138,7 @@ static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, struct gfar_private *priv = netdev_priv(dev); u64 *extra = (u64 *) & priv->extra_stats; - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) { + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) { u32 __iomem *rmon = (u32 __iomem *) & priv->regs->rmon; struct gfar_stats *stats = (struct gfar_stats *) buf; @@ -158,7 +158,7 @@ static int gfar_sset_count(struct net_device *dev, int sset) switch (sset) { case ETH_SS_STATS: - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) return GFAR_STATS_LEN; else return GFAR_EXTRA_STATS_LEN; @@ -280,7 +280,7 @@ static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals { struct gfar_private *priv = netdev_priv(dev); - if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE)) + if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE)) return -EOPNOTSUPP; if (NULL == priv->phydev) @@ -332,7 +332,7 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals { struct gfar_private *priv = netdev_priv(dev); - if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE)) + if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE)) return -EOPNOTSUPP; /* Set up rx coalescing */ @@ -482,7 +482,7 @@ static int gfar_set_rx_csum(struct net_device *dev, uint32_t data) unsigned long flags; int err = 0; - if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) + if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) return -EOPNOTSUPP; if (dev->flags & IFF_UP) { @@ -515,7 +515,7 @@ static uint32_t gfar_get_rx_csum(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); - if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) + if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) return 0; return priv->rx_csum_enable; @@ -526,7 +526,7 @@ static int gfar_set_tx_csum(struct net_device *dev, uint32_t data) unsigned long flags; struct gfar_private *priv = netdev_priv(dev); - if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) + if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) return -EOPNOTSUPP; spin_lock_irqsave(&priv->txlock, flags); @@ -547,7 +547,7 @@ static uint32_t gfar_get_tx_csum(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); - if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) + if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) return 0; return (dev->features & NETIF_F_IP_CSUM) != 0; @@ -570,7 +570,7 @@ static void gfar_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct gfar_private *priv = netdev_priv(dev); - if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) { + if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) { wol->supported = WAKE_MAGIC; wol->wolopts = priv->wol_en ? WAKE_MAGIC : 0; } else { @@ -583,7 +583,7 @@ static int gfar_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) struct gfar_private *priv = netdev_priv(dev); unsigned long flags; - if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) && + if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) && wol->wolopts != 0) return -EINVAL; diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index 0e2595d24933..f3706e415b45 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -34,6 +34,8 @@ #include #include #include +#include +#include #include #include @@ -150,19 +152,83 @@ static int gfar_mdio_reset(struct mii_bus *bus) return 0; } +/* Allocate an array which provides irq #s for each PHY on the given bus */ +static int *create_irq_map(struct device_node *np) +{ + int *irqs; + int i; + struct device_node *child = NULL; + + irqs = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); + + if (!irqs) + return NULL; + + for (i = 0; i < PHY_MAX_ADDR; i++) + irqs[i] = PHY_POLL; + + while ((child = of_get_next_child(np, child)) != NULL) { + int irq = irq_of_parse_and_map(child, 0); + const u32 *id; + + if (irq == NO_IRQ) + continue; + + id = of_get_property(child, "reg", NULL); + + if (!id) + continue; + + if (*id < PHY_MAX_ADDR && *id >= 0) + irqs[*id] = irq; + else + printk(KERN_WARNING "%s: " + "%d is not a valid PHY address\n", + np->full_name, *id); + } + + return irqs; +} + + +void gfar_mdio_bus_name(char *name, struct device_node *np) +{ + const u32 *reg; + + reg = of_get_property(np, "reg", NULL); -static int gfar_mdio_probe(struct device *dev) + snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0); +} + +/* Scan the bus in reverse, looking for an empty spot */ +static int gfar_mdio_find_free(struct mii_bus *new_bus) +{ + int i; + + for (i = PHY_MAX_ADDR; i > 0; i--) { + u32 phy_id; + + if (get_phy_id(new_bus, i, &phy_id)) + return -1; + + if (phy_id == 0xffffffff) + break; + } + + return i; +} + +static int gfar_mdio_probe(struct of_device *ofdev, + const struct of_device_id *match) { - struct platform_device *pdev = to_platform_device(dev); - struct gianfar_mdio_data *pdata; struct gfar_mii __iomem *regs; struct gfar __iomem *enet_regs; struct mii_bus *new_bus; - struct resource *r; - int i, err = 0; - - if (NULL == dev) - return -EINVAL; + int err = 0; + u64 addr, size; + struct device_node *np = ofdev->node; + struct device_node *tbi; + int tbiaddr = -1; new_bus = mdiobus_alloc(); if (NULL == new_bus) @@ -172,31 +238,28 @@ static int gfar_mdio_probe(struct device *dev) new_bus->read = &gfar_mdio_read, new_bus->write = &gfar_mdio_write, new_bus->reset = &gfar_mdio_reset, - snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id); - - pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data; - - if (NULL == pdata) { - printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id); - return -ENODEV; - } - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gfar_mdio_bus_name(new_bus->id, np); /* Set the PHY base address */ - regs = ioremap(r->start, sizeof (struct gfar_mii)); + addr = of_translate_address(np, of_get_address(np, 0, &size, NULL)); + regs = ioremap(addr, size); if (NULL == regs) { err = -ENOMEM; - goto reg_map_fail; + goto err_free_bus; } new_bus->priv = (void __force *)regs; - new_bus->irq = pdata->irq; + new_bus->irq = create_irq_map(np); + + if (new_bus->irq == NULL) { + err = -ENOMEM; + goto err_unmap_regs; + } - new_bus->parent = dev; - dev_set_drvdata(dev, new_bus); + new_bus->parent = &ofdev->dev; + dev_set_drvdata(&ofdev->dev, new_bus); /* * This is mildly evil, but so is our hardware for doing this. @@ -206,96 +269,109 @@ static int gfar_mdio_probe(struct device *dev) enet_regs = (struct gfar __iomem *) ((char *)regs - offsetof(struct gfar, gfar_mii_regs)); - /* Scan the bus, looking for an empty spot for TBIPA */ - gfar_write(&enet_regs->tbipa, 0); - for (i = PHY_MAX_ADDR; i > 0; i--) { - u32 phy_id; + for_each_child_of_node(np, tbi) { + if (!strncmp(tbi->type, "tbi-phy", 8)) + break; + } - err = get_phy_id(new_bus, i, &phy_id); - if (err) - goto bus_register_fail; + if (tbi) { + const u32 *prop = of_get_property(tbi, "reg", NULL); - if (phy_id == 0xffffffff) - break; + if (prop) + tbiaddr = *prop; } - /* The bus is full. We don't support using 31 PHYs, sorry */ - if (i == 0) { + if (tbiaddr == -1) { + gfar_write(&enet_regs->tbipa, 0); + + tbiaddr = gfar_mdio_find_free(new_bus); + } + + /* + * We define TBIPA at 0 to be illegal, opting to fail for boards that + * have PHYs at 1-31, rather than change tbipa and rescan. + */ + if (tbiaddr == 0) { err = -EBUSY; - goto bus_register_fail; + goto err_free_irqs; } - gfar_write(&enet_regs->tbipa, i); + gfar_write(&enet_regs->tbipa, tbiaddr); + + /* + * The TBIPHY-only buses will find PHYs at every address, + * so we mask them all but the TBI + */ + if (!of_device_is_compatible(np, "fsl,gianfar-mdio")) + new_bus->phy_mask = ~(1 << tbiaddr); err = mdiobus_register(new_bus); - if (0 != err) { + if (err != 0) { printk (KERN_ERR "%s: Cannot register as MDIO bus\n", new_bus->name); - goto bus_register_fail; + goto err_free_irqs; } return 0; -bus_register_fail: +err_free_irqs: + kfree(new_bus->irq); +err_unmap_regs: iounmap(regs); -reg_map_fail: +err_free_bus: mdiobus_free(new_bus); return err; } -static int gfar_mdio_remove(struct device *dev) +static int gfar_mdio_remove(struct of_device *ofdev) { - struct mii_bus *bus = dev_get_drvdata(dev); + struct mii_bus *bus = dev_get_drvdata(&ofdev->dev); mdiobus_unregister(bus); - dev_set_drvdata(dev, NULL); + dev_set_drvdata(&ofdev->dev, NULL); iounmap((void __iomem *)bus->priv); bus->priv = NULL; + kfree(bus->irq); mdiobus_free(bus); return 0; } -static struct device_driver gianfar_mdio_driver = { +static struct of_device_id gfar_mdio_match[] = +{ + { + .compatible = "fsl,gianfar-mdio", + }, + { + .compatible = "fsl,gianfar-tbi", + }, + { + .type = "mdio", + .compatible = "gianfar", + }, + {}, +}; + +static struct of_platform_driver gianfar_mdio_driver = { .name = "fsl-gianfar_mdio", - .bus = &platform_bus_type, + .match_table = gfar_mdio_match, + .probe = gfar_mdio_probe, .remove = gfar_mdio_remove, }; -static int match_mdio_bus(struct device *dev, void *data) -{ - const struct gfar_private *priv = data; - const struct platform_device *pdev = to_platform_device(dev); - - return !strcmp(pdev->name, gianfar_mdio_driver.name) && - pdev->id == priv->einfo->mdio_bus; -} - -/* Given a gfar_priv structure, find the mii_bus controlled by this device (not - * necessarily the same as the bus the gfar's PHY is on), if one exists. - * Normally only the first gianfar controls a mii_bus. */ -struct mii_bus *gfar_get_miibus(const struct gfar_private *priv) -{ - /*const*/ struct device *d; - - d = bus_find_device(gianfar_mdio_driver.bus, NULL, (void *)priv, - match_mdio_bus); - return d ? dev_get_drvdata(d) : NULL; -} - int __init gfar_mdio_init(void) { - return driver_register(&gianfar_mdio_driver); + return of_register_platform_driver(&gianfar_mdio_driver); } void gfar_mdio_exit(void) { - driver_unregister(&gianfar_mdio_driver); + of_unregister_platform_driver(&gianfar_mdio_driver); } diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h index 02dc970ca1ff..65c242cd468a 100644 --- a/drivers/net/gianfar_mii.h +++ b/drivers/net/gianfar_mii.h @@ -49,4 +49,6 @@ int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum); struct mii_bus *gfar_get_miibus(const struct gfar_private *priv); int __init gfar_mdio_init(void); void gfar_mdio_exit(void); + +void gfar_mdio_bus_name(char *name, struct device_node *np); #endif /* GIANFAR_PHY_H */ diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 708bab58d8d0..d9051d717d27 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -47,12 +47,7 @@ struct gianfar_platform_data { /* device specific information */ u32 device_flags; - /* board specific information */ - u32 board_flags; - int mdio_bus; /* Bus controlled by us */ - char bus_id[MII_BUS_ID_SIZE]; /* Bus PHY is on */ - u32 phy_id; - u8 mac_addr[6]; + char bus_id[BUS_ID_SIZE]; phy_interface_t interface; }; @@ -61,17 +56,6 @@ struct gianfar_mdio_data { int irq[32]; }; -/* Flags related to gianfar device features */ -#define FSL_GIANFAR_DEV_HAS_GIGABIT 0x00000001 -#define FSL_GIANFAR_DEV_HAS_COALESCE 0x00000002 -#define FSL_GIANFAR_DEV_HAS_RMON 0x00000004 -#define FSL_GIANFAR_DEV_HAS_MULTI_INTR 0x00000008 -#define FSL_GIANFAR_DEV_HAS_CSUM 0x00000010 -#define FSL_GIANFAR_DEV_HAS_VLAN 0x00000020 -#define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH 0x00000040 -#define FSL_GIANFAR_DEV_HAS_PADDING 0x00000080 -#define FSL_GIANFAR_DEV_HAS_MAGIC_PACKET 0x00000100 - /* Flags in gianfar_platform_data */ #define FSL_GIANFAR_BRD_HAS_PHY_INTR 0x00000001 /* set or use a timer */ #define FSL_GIANFAR_BRD_IS_REDUCED 0x00000002 /* Set if RGMII, RMII */ -- cgit v1.2.3 From aacf4a0135a330e68df412a6797a9b9689d8d9a3 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Thu, 4 Dec 2008 16:17:00 -0700 Subject: usbmon: drop bogus 0t from usbmon.txt The example is incorrect: there is no 0t socket (the '1t' format has no bus number in it). Also, correct the broken sentence for USB Tag. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/usbmon.txt | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt index 2917ce4ffdc4..270481906dc8 100644 --- a/Documentation/usb/usbmon.txt +++ b/Documentation/usb/usbmon.txt @@ -34,11 +34,12 @@ if usbmon is built into the kernel. Verify that bus sockets are present. # ls /sys/kernel/debug/usbmon -0s 0t 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u +0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u # -Now you can choose to either use the sockets numbered '0' (to capture packets on -all buses), and skip to step #3, or find the bus used by your device with step #2. +Now you can choose to either use the socket '0u' (to capture packets on all +buses), and skip to step #3, or find the bus used by your device with step #2. +This allows to filter away annoying devices that talk continuously. 2. Find which bus connects to the desired device @@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types. Here is the list of words, from left to right: -- URB Tag. This is used to identify URBs is normally a kernel mode address - of the URB structure in hexadecimal. +- URB Tag. This is used to identify URBs, and is normally an in-kernel address + of the URB structure in hexadecimal, but can be a sequence number or any + other unique string, within reason. - Timestamp in microseconds, a decimal number. The timestamp's resolution depends on available clock, and so it can be much worse than a microsecond -- cgit v1.2.3 From c33ba392147a8506b1b43899fdea6069e27e4277 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 4 Dec 2008 16:30:53 +0100 Subject: USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm behaviour Commit 7bb5ea54 (usb gadget serial: use composite gadget framework) changed the default for the use_acm parameter from 0 to 1. Update the documentation to match. Signed-off-by: Peter Korsgaard Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/gadget_serial.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt index 9b22bd14c348..eac7df94d8e3 100644 --- a/Documentation/usb/gadget_serial.txt +++ b/Documentation/usb/gadget_serial.txt @@ -114,11 +114,11 @@ modules. Then you must load the gadget serial driver. To load it as an ACM device (recommended for interoperability), do this: - modprobe g_serial use_acm=1 + modprobe g_serial To load it as a vendor specific bulk in/out device, do this: - modprobe g_serial + modprobe g_serial use_acm=0 This will also automatically load the underlying gadget peripheral controller driver. This must be done each time you reboot the gadget -- cgit v1.2.3 From 9a9fafb89433c5fd1331bac0c84c4b321e358b42 Mon Sep 17 00:00:00 2001 From: Phil Endecott Date: Mon, 1 Dec 2008 10:22:33 -0500 Subject: USB: fix comment about endianness of descriptors This patch fixes a comment and clarifies the documentation about the endianness of descriptors. The current policy is that descriptors will be little-endian at the API even on big-endian systems; however the /proc/bus/usb API predates this policy and presents descriptors with some multibyte fields byte-swapped. Signed-off-by: Phil Endecott Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/proc_usb_info.txt | 6 ++++-- include/linux/usb/ch9.h | 8 ++++++-- 2 files changed, 10 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt index 077e9032d0cd..fafcd4723260 100644 --- a/Documentation/usb/proc_usb_info.txt +++ b/Documentation/usb/proc_usb_info.txt @@ -49,8 +49,10 @@ it and 002/048 sometime later. These files can be read as binary data. The binary data consists of first the device descriptor, then the descriptors for each -configuration of the device. That information is also shown in -text form by the /proc/bus/usb/devices file, described later. +configuration of the device. Multi-byte fields in the device and +configuration descriptors, but not other descriptors, are converted +to host endianness by the kernel. This information is also shown +in text form by the /proc/bus/usb/devices file, described later. These files may also be used to write user-level drivers for the USB devices. You would open the /proc/bus/usb/BBB/DDD file read/write, diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 73a2f4eb1f7a..9b42baed3900 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -158,8 +158,12 @@ struct usb_ctrlrequest { * (rarely) accepted by SET_DESCRIPTOR. * * Note that all multi-byte values here are encoded in little endian - * byte order "on the wire". But when exposed through Linux-USB APIs, - * they've been converted to cpu byte order. + * byte order "on the wire". Within the kernel and when exposed + * through the Linux-USB APIs, they are not converted to cpu byte + * order; it is the responsibility of the client code to do this. + * The single exception is when device and configuration descriptors (but + * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); + * in this case the fields are converted to host endianness by the kernel. */ /* -- cgit v1.2.3 From e28d83223a1e5672174dcdc6b73c1be3fa3de877 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 17 Dec 2008 13:48:29 +0100 Subject: ALSA: hda - Fix silent HP output on D975 Some desktops seems to have no HP/mic jack detection on the front panel, which results in the silent output in the recent driver, because the driver mutes the output (to save power) when no plug is detected. This patch adds a new model that disables the jack-detection. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_sigmatel.c | 7 +++++++ 2 files changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3cd2ad958176..a57cd5438b75 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1063,6 +1063,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. STAC9227/9228/9229/927x ref Reference board + ref-no-jd Reference board without HP/Mic jack detection 3stack D965 3stack 5stack D965 5stack + SPDIF dell-3stack Dell Dimension E520 diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 5dd3e89f620a..d6fa401791c5 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -127,6 +127,7 @@ enum { }; enum { + STAC_D965_REF_NO_JD, /* no jack-detection */ STAC_D965_REF, STAC_D965_3ST, STAC_D965_5ST, @@ -2027,6 +2028,7 @@ static unsigned int dell_3st_pin_configs[14] = { }; static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = { + [STAC_D965_REF_NO_JD] = ref927x_pin_configs, [STAC_D965_REF] = ref927x_pin_configs, [STAC_D965_3ST] = d965_3st_pin_configs, [STAC_D965_5ST] = d965_5st_pin_configs, @@ -2035,6 +2037,7 @@ static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = { }; static const char *stac927x_models[STAC_927X_MODELS] = { + [STAC_D965_REF_NO_JD] = "ref-no-jd", [STAC_D965_REF] = "ref", [STAC_D965_3ST] = "3stack", [STAC_D965_5ST] = "5stack", @@ -4899,6 +4902,10 @@ static int patch_stac927x(struct hda_codec *codec) */ codec->bus->needs_damn_long_delay = 1; + /* no jack detecion for ref-no-jd model */ + if (spec->board_config == STAC_D965_REF_NO_JD) + spec->hp_detect = 0; + return 0; } -- cgit v1.2.3 From f38f1d2aa5a3520cf05da7cd6bd12fe2b0c509b7 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 16 Dec 2008 23:06:40 -0500 Subject: trace: add a way to enable or disable the stack tracer Impact: enhancement to stack tracer The stack tracer currently is either on when configured in or off when it is not. It can not be disabled when it is configured on. (besides disabling the function tracer that it uses) This patch adds a way to enable or disable the stack tracer at run time. It defaults off on bootup, but a kernel parameter 'stacktrace' has been added to enable it on bootup. A new sysctl has been added "kernel.stack_tracer_enabled" to let the user enable or disable the stack tracer at run time. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 4 +++ include/linux/ftrace.h | 8 ++++++ kernel/sysctl.c | 10 +++++++ kernel/trace/Kconfig | 13 +++++++--- kernel/trace/trace_stack.c | 52 ++++++++++++++++++++++++++++++++++--- 5 files changed, 79 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2919a2e91938..edab81c13182 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -89,6 +89,7 @@ parameter is applicable: SPARC Sparc architecture is enabled. SWSUSP Software suspend (hibernation) is enabled. SUSPEND System suspend states are enabled. + FTRACE Function tracing enabled. TS Appropriate touchscreen support is enabled. USB USB support is enabled. USBHID USB Human Interface Device support is enabled. @@ -2173,6 +2174,9 @@ and is between 256 and 4096 characters. It is defined in the file st= [HW,SCSI] SCSI tape parameters (buffers, etc.) See Documentation/scsi/st.txt. + stacktrace [FTRACE] + Enabled the stack tracer on boot up. + sti= [PARISC,HW] Format: Set the STI (builtin display/keyboard on the HP-PARISC diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 44020f31bd81..6b0db53caa7d 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -86,6 +86,14 @@ static inline void ftrace_stop(void) { } static inline void ftrace_start(void) { } #endif /* CONFIG_FUNCTION_TRACER */ +#ifdef CONFIG_STACK_TRACER +extern int stack_tracer_enabled; +int +stack_trace_sysctl(struct ctl_table *table, int write, + struct file *file, void __user *buffer, size_t *lenp, + loff_t *ppos); +#endif + #ifdef CONFIG_DYNAMIC_FTRACE /* asm/ftrace.h must be defined for archs supporting dynamic ftrace */ #include diff --git a/kernel/sysctl.c b/kernel/sysctl.c index c83f566e940a..6ac501a2dcc6 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -487,6 +487,16 @@ static struct ctl_table kern_table[] = { .proc_handler = &ftrace_enable_sysctl, }, #endif +#ifdef CONFIG_STACK_TRACER + { + .ctl_name = CTL_UNNUMBERED, + .procname = "stack_tracer_enabled", + .data = &stack_tracer_enabled, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &stack_trace_sysctl, + }, +#endif #ifdef CONFIG_TRACING { .ctl_name = CTL_UNNUMBERED, diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index d8bae6f4219e..e2a4ff6fc3a6 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -244,10 +244,15 @@ config STACK_TRACER This tracer works by hooking into every function call that the kernel executes, and keeping a maximum stack depth value and - stack-trace saved. Because this logic has to execute in every - kernel function, all the time, this option can slow down the - kernel measurably and is generally intended for kernel - developers only. + stack-trace saved. If this is configured with DYNAMIC_FTRACE + then it will not have any overhead while the stack tracer + is disabled. + + To enable the stack tracer on bootup, pass in 'stacktrace' + on the kernel command line. + + The stack tracer can also be enabled or disabled via the + sysctl kernel.stack_tracer_enabled Say N if unsure. diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c index 0b863f2cbc8e..4842c969c785 100644 --- a/kernel/trace/trace_stack.c +++ b/kernel/trace/trace_stack.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include "trace.h" @@ -31,6 +32,10 @@ static raw_spinlock_t max_stack_lock = static int stack_trace_disabled __read_mostly; static DEFINE_PER_CPU(int, trace_active); +static DEFINE_MUTEX(stack_sysctl_mutex); + +int stack_tracer_enabled; +static int last_stack_tracer_enabled; static inline void check_stack(void) { @@ -174,7 +179,7 @@ stack_max_size_write(struct file *filp, const char __user *ubuf, return count; } -static struct file_operations stack_max_size_fops = { +static const struct file_operations stack_max_size_fops = { .open = tracing_open_generic, .read = stack_max_size_read, .write = stack_max_size_write, @@ -272,7 +277,7 @@ static int t_show(struct seq_file *m, void *v) return 0; } -static struct seq_operations stack_trace_seq_ops = { +static const struct seq_operations stack_trace_seq_ops = { .start = t_start, .next = t_next, .stop = t_stop, @@ -288,12 +293,48 @@ static int stack_trace_open(struct inode *inode, struct file *file) return ret; } -static struct file_operations stack_trace_fops = { +static const struct file_operations stack_trace_fops = { .open = stack_trace_open, .read = seq_read, .llseek = seq_lseek, }; +int +stack_trace_sysctl(struct ctl_table *table, int write, + struct file *file, void __user *buffer, size_t *lenp, + loff_t *ppos) +{ + int ret; + + mutex_lock(&stack_sysctl_mutex); + + ret = proc_dointvec(table, write, file, buffer, lenp, ppos); + + if (ret || !write || + (last_stack_tracer_enabled == stack_tracer_enabled)) + goto out; + + last_stack_tracer_enabled = stack_tracer_enabled; + + if (stack_tracer_enabled) + register_ftrace_function(&trace_ops); + else + unregister_ftrace_function(&trace_ops); + + out: + mutex_unlock(&stack_sysctl_mutex); + return ret; +} + +static int start_stack_trace __initdata; + +static __init int enable_stacktrace(char *str) +{ + start_stack_trace = 1; + return 1; +} +__setup("stacktrace", enable_stacktrace); + static __init int stack_trace_init(void) { struct dentry *d_tracer; @@ -311,7 +352,10 @@ static __init int stack_trace_init(void) if (!entry) pr_warning("Could not create debugfs 'stack_trace' entry\n"); - register_ftrace_function(&trace_ops); + if (start_stack_trace) { + register_ftrace_function(&trace_ops); + stack_tracer_enabled = 1; + } return 0; } -- cgit v1.2.3 From 64db4cfff99c04cd5f550357edcc8780f96b54a2 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 18 Dec 2008 21:55:32 +0100 Subject: "Tree RCU": scalable classic RCU implementation This patch fixes a long-standing performance bug in classic RCU that results in massive internal-to-RCU lock contention on systems with more than a few hundred CPUs. Although this patch creates a separate flavor of RCU for ease of review and patch maintenance, it is intended to replace classic RCU. This patch still handles stress better than does mainline, so I am still calling it ready for inclusion. This patch is against the -tip tree. Nevertheless, experience on an actual 1000+ CPU machine would still be most welcome. Most of the changes noted below were found while creating an rcutiny (which should permit ejecting the current rcuclassic) and while doing detailed line-by-line documentation. Updates from v9 (http://lkml.org/lkml/2008/12/2/334): o Fixes from remainder of line-by-line code walkthrough, including comment spelling, initialization, undesirable narrowing due to type conversion, removing redundant memory barriers, removing redundant local-variable initialization, and removing redundant local variables. I do not believe that any of these fixes address the CPU-hotplug issues that Andi Kleen was seeing, but please do give it a whirl in case the machine is smarter than I am. A writeup from the walkthrough may be found at the following URL, in case you are suffering from terminal insomnia or masochism: http://www.kernel.org/pub/linux/kernel/people/paulmck/tmp/rcutree-walkthrough.2008.12.16a.pdf o Made rcutree tracing use seq_file, as suggested some time ago by Lai Jiangshan. o Added a .csv variant of the rcudata debugfs trace file, to allow people having thousands of CPUs to drop the data into a spreadsheet. Tested with oocalc and gnumeric. Updated documentation to suit. Updates from v8 (http://lkml.org/lkml/2008/11/15/139): o Fix a theoretical race between grace-period initialization and force_quiescent_state() that could occur if more than three jiffies were required to carry out the grace-period initialization. Which it might, if you had enough CPUs. o Apply Ingo's printk-standardization patch. o Substitute local variables for repeated accesses to global variables. o Fix comment misspellings and redundant (but harmless) increments of ->n_rcu_pending (this latter after having explicitly added it). o Apply checkpatch fixes. Updates from v7 (http://lkml.org/lkml/2008/10/10/291): o Fixed a number of problems noted by Gautham Shenoy, including the cpu-stall-detection bug that he was having difficulty convincing me was real. ;-) o Changed cpu-stall detection to wait for ten seconds rather than three in order to reduce false positive, as suggested by Ingo Molnar. o Produced a design document (http://lwn.net/Articles/305782/). The act of writing this document uncovered a number of both theoretical and "here and now" bugs as noted below. o Fix dynticks_nesting accounting confusion, simplify WARN_ON() condition, fix kerneldoc comments, and add memory barriers in dynticks interface functions. o Add more data to tracing. o Remove unused "rcu_barrier" field from rcu_data structure. o Count calls to rcu_pending() from scheduling-clock interrupt to use as a surrogate timebase should jiffies stop counting. o Fix a theoretical race between force_quiescent_state() and grace-period initialization. Yes, initialization does have to go on for some jiffies for this race to occur, but given enough CPUs... Updates from v6 (http://lkml.org/lkml/2008/9/23/448): o Fix a number of checkpatch.pl complaints. o Apply review comments from Ingo Molnar and Lai Jiangshan on the stall-detection code. o Fix several bugs in !CONFIG_SMP builds. o Fix a misspelled config-parameter name so that RCU now announces at boot time if stall detection is configured. o Run tests on numerous combinations of configurations parameters, which after the fixes above, now build and run correctly. Updates from v5 (http://lkml.org/lkml/2008/9/15/92, bad subject line): o Fix a compiler error in the !CONFIG_FANOUT_EXACT case (blew a changeset some time ago, and finally got around to retesting this option). o Fix some tracing bugs in rcupreempt that caused incorrect totals to be printed. o I now test with a more brutal random-selection online/offline script (attached). Probably more brutal than it needs to be on the people reading it as well, but so it goes. o A number of optimizations and usability improvements: o Make rcu_pending() ignore the grace-period timeout when there is no grace period in progress. o Make force_quiescent_state() avoid going for a global lock in the case where there is no grace period in progress. o Rearrange struct fields to improve struct layout. o Make call_rcu() initiate a grace period if RCU was idle, rather than waiting for the next scheduling clock interrupt. o Invoke rcu_irq_enter() and rcu_irq_exit() only when idle, as suggested by Andi Kleen. I still don't completely trust this change, and might back it out. o Make CONFIG_RCU_TRACE be the single config variable manipulated for all forms of RCU, instead of the prior confusion. o Document tracing files and formats for both rcupreempt and rcutree. Updates from v4 for those missing v5 given its bad subject line: o Separated dynticks interface so that NMIs and irqs call separate functions, greatly simplifying it. In particular, this code no longer requires a proof of correctness. ;-) o Separated dynticks state out into its own per-CPU structure, avoiding the duplicated accounting. o The case where a dynticks-idle CPU runs an irq handler that invokes call_rcu() is now correctly handled, forcing that CPU out of dynticks-idle mode. o Review comments have been applied (thank you all!!!). For but one example, fixed the dynticks-ordering issue that Manfred pointed out, saving me much debugging. ;-) o Adjusted rcuclassic and rcupreempt to handle dynticks changes. Attached is an updated patch to Classic RCU that applies a hierarchy, greatly reducing the contention on the top-level lock for large machines. This passes 10-hour concurrent rcutorture and online-offline testing on 128-CPU ppc64 without dynticks enabled, and exposes some timekeeping bugs in presence of dynticks (exciting working on a system where "sleep 1" hangs until interrupted...), which were fixed in the 2.6.27 kernel. It is getting more reliable than mainline by some measures, so the next version will be against -tip for inclusion. See also Manfred Spraul's recent patches (or his earlier work from 2004 at http://marc.info/?l=linux-kernel&m=108546384711797&w=2). We will converge onto a common patch in the fullness of time, but are currently exploring different regions of the design space. That said, I have already gratefully stolen quite a few of Manfred's ideas. This patch provides CONFIG_RCU_FANOUT, which controls the bushiness of the RCU hierarchy. Defaults to 32 on 32-bit machines and 64 on 64-bit machines. If CONFIG_NR_CPUS is less than CONFIG_RCU_FANOUT, there is no hierarchy. By default, the RCU initialization code will adjust CONFIG_RCU_FANOUT to balance the hierarchy, so strongly NUMA architectures may choose to set CONFIG_RCU_FANOUT_EXACT to disable this balancing, allowing the hierarchy to be exactly aligned to the underlying hardware. Up to two levels of hierarchy are permitted (in addition to the root node), allowing up to 16,384 CPUs on 32-bit systems and up to 262,144 CPUs on 64-bit systems. I just know that I am going to regret saying this, but this seems more than sufficient for the foreseeable future. (Some architectures might wish to set CONFIG_RCU_FANOUT=4, which would limit such architectures to 64 CPUs. If this becomes a real problem, additional levels can be added, but I doubt that it will make a significant difference on real hardware.) In the common case, a given CPU will manipulate its private rcu_data structure and the rcu_node structure that it shares with its immediate neighbors. This can reduce both lock and memory contention by multiple orders of magnitude, which should eliminate the need for the strange manipulations that are reported to be required when running Linux on very large systems. Some shortcomings: o More bugs will probably surface as a result of an ongoing line-by-line code inspection. Patches will be provided as required. o There are probably hangs, rcutorture failures, &c. Seems quite stable on a 128-CPU machine, but that is kind of small compared to 4096 CPUs. However, seems to do better than mainline. Patches will be provided as required. o The memory footprint of this version is several KB larger than rcuclassic. A separate UP-only rcutiny patch will be provided, which will reduce the memory footprint significantly, even compared to the old rcuclassic. One such patch passes light testing, and has a memory footprint smaller even than rcuclassic. Initial reaction from various embedded guys was "it is not worth it", so am putting it aside. Credits: o Manfred Spraul for ideas, review comments, and bugs spotted, as well as some good friendly competition. ;-) o Josh Triplett, Ingo Molnar, Peter Zijlstra, Mathieu Desnoyers, Lai Jiangshan, Andi Kleen, Andy Whitcroft, and Andrew Morton for reviews and comments. o Thomas Gleixner for much-needed help with some timer issues (see patches below). o Jon M. Tollefson, Tim Pepper, Andrew Theurer, Jose R. Santos, Andy Whitcroft, Darrick Wong, Nishanth Aravamudan, Anton Blanchard, Dave Kleikamp, and Nathan Lynch for keeping machines alive despite my heavy abuse^Wtesting. Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar --- Documentation/RCU/00-INDEX | 2 + Documentation/RCU/trace.txt | 413 +++++++++ arch/powerpc/platforms/pseries/rtasd.c | 4 + include/linux/hardirq.h | 14 +- include/linux/rcupdate.h | 10 +- include/linux/rcutree.h | 329 +++++++ init/Kconfig | 18 +- kernel/Kconfig.preempt | 62 +- kernel/Makefile | 6 +- kernel/rcupreempt.c | 10 + kernel/rcupreempt_trace.c | 10 +- kernel/rcutree.c | 1535 ++++++++++++++++++++++++++++++++ kernel/rcutree_trace.c | 271 ++++++ kernel/softirq.c | 5 +- lib/Kconfig.debug | 13 + 15 files changed, 2671 insertions(+), 31 deletions(-) create mode 100644 Documentation/RCU/trace.txt create mode 100644 include/linux/rcutree.h create mode 100644 kernel/rcutree.c create mode 100644 kernel/rcutree_trace.c (limited to 'Documentation') diff --git a/Documentation/RCU/00-INDEX b/Documentation/RCU/00-INDEX index 461481dfb7c3..7dc0695a8f90 100644 --- a/Documentation/RCU/00-INDEX +++ b/Documentation/RCU/00-INDEX @@ -16,6 +16,8 @@ RTFP.txt - List of RCU papers (bibliography) going back to 1980. torture.txt - RCU Torture Test Operation (CONFIG_RCU_TORTURE_TEST) +trace.txt + - CONFIG_RCU_TRACE debugfs files and formats UP.txt - RCU on Uniprocessor Systems whatisRCU.txt diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt new file mode 100644 index 000000000000..068848240a8b --- /dev/null +++ b/Documentation/RCU/trace.txt @@ -0,0 +1,413 @@ +CONFIG_RCU_TRACE debugfs Files and Formats + + +The rcupreempt and rcutree implementations of RCU provide debugfs trace +output that summarizes counters and state. This information is useful for +debugging RCU itself, and can sometimes also help to debug abuses of RCU. +Note that the rcuclassic implementation of RCU does not provide debugfs +trace output. + +The following sections describe the debugfs files and formats for +preemptable RCU (rcupreempt) and hierarchical RCU (rcutree). + + +Preemptable RCU debugfs Files and Formats + +This implementation of RCU provides three debugfs files under the +top-level directory RCU: rcu/rcuctrs (which displays the per-CPU +counters used by preemptable RCU) rcu/rcugp (which displays grace-period +counters), and rcu/rcustats (which internal counters for debugging RCU). + +The output of "cat rcu/rcuctrs" looks as follows: + +CPU last cur F M + 0 5 -5 0 0 + 1 -1 0 0 0 + 2 0 1 0 0 + 3 0 1 0 0 + 4 0 1 0 0 + 5 0 1 0 0 + 6 0 2 0 0 + 7 0 -1 0 0 + 8 0 1 0 0 +ggp = 26226, state = waitzero + +The per-CPU fields are as follows: + +o "CPU" gives the CPU number. Offline CPUs are not displayed. + +o "last" gives the value of the counter that is being decremented + for the current grace period phase. In the example above, + the counters sum to 4, indicating that there are still four + RCU read-side critical sections still running that started + before the last counter flip. + +o "cur" gives the value of the counter that is currently being + both incremented (by rcu_read_lock()) and decremented (by + rcu_read_unlock()). In the example above, the counters sum to + 1, indicating that there is only one RCU read-side critical section + still running that started after the last counter flip. + +o "F" indicates whether RCU is waiting for this CPU to acknowledge + a counter flip. In the above example, RCU is not waiting on any, + which is consistent with the state being "waitzero" rather than + "waitack". + +o "M" indicates whether RCU is waiting for this CPU to execute a + memory barrier. In the above example, RCU is not waiting on any, + which is consistent with the state being "waitzero" rather than + "waitmb". + +o "ggp" is the global grace-period counter. + +o "state" is the RCU state, which can be one of the following: + + o "idle": there is no grace period in progress. + + o "waitack": RCU just incremented the global grace-period + counter, which has the effect of reversing the roles of + the "last" and "cur" counters above, and is waiting for + all the CPUs to acknowledge the flip. Once the flip has + been acknowledged, CPUs will no longer be incrementing + what are now the "last" counters, so that their sum will + decrease monotonically down to zero. + + o "waitzero": RCU is waiting for the sum of the "last" counters + to decrease to zero. + + o "waitmb": RCU is waiting for each CPU to execute a memory + barrier, which ensures that instructions from a given CPU's + last RCU read-side critical section cannot be reordered + with instructions following the memory-barrier instruction. + +The output of "cat rcu/rcugp" looks as follows: + +oldggp=48870 newggp=48873 + +Note that reading from this file provokes a synchronize_rcu(). The +"oldggp" value is that of "ggp" from rcu/rcuctrs above, taken before +executing the synchronize_rcu(), and the "newggp" value is also the +"ggp" value, but taken after the synchronize_rcu() command returns. + + +The output of "cat rcu/rcugp" looks as follows: + +na=1337955 nl=40 wa=1337915 wl=44 da=1337871 dl=0 dr=1337871 di=1337871 +1=50989 e1=6138 i1=49722 ie1=82 g1=49640 a1=315203 ae1=265563 a2=49640 +z1=1401244 ze1=1351605 z2=49639 m1=5661253 me1=5611614 m2=49639 + +These are counters tracking internal preemptable-RCU events, however, +some of them may be useful for debugging algorithms using RCU. In +particular, the "nl", "wl", and "dl" values track the number of RCU +callbacks in various states. The fields are as follows: + +o "na" is the total number of RCU callbacks that have been enqueued + since boot. + +o "nl" is the number of RCU callbacks waiting for the previous + grace period to end so that they can start waiting on the next + grace period. + +o "wa" is the total number of RCU callbacks that have started waiting + for a grace period since boot. "na" should be roughly equal to + "nl" plus "wa". + +o "wl" is the number of RCU callbacks currently waiting for their + grace period to end. + +o "da" is the total number of RCU callbacks whose grace periods + have completed since boot. "wa" should be roughly equal to + "wl" plus "da". + +o "dr" is the total number of RCU callbacks that have been removed + from the list of callbacks ready to invoke. "dr" should be roughly + equal to "da". + +o "di" is the total number of RCU callbacks that have been invoked + since boot. "di" should be roughly equal to "da", though some + early versions of preemptable RCU had a bug so that only the + last CPU's count of invocations was displayed, rather than the + sum of all CPU's counts. + +o "1" is the number of calls to rcu_try_flip(). This should be + roughly equal to the sum of "e1", "i1", "a1", "z1", and "m1" + described below. In other words, the number of times that + the state machine is visited should be equal to the sum of the + number of times that each state is visited plus the number of + times that the state-machine lock acquisition failed. + +o "e1" is the number of times that rcu_try_flip() was unable to + acquire the fliplock. + +o "i1" is the number of calls to rcu_try_flip_idle(). + +o "ie1" is the number of times rcu_try_flip_idle() exited early + due to the calling CPU having no work for RCU. + +o "g1" is the number of times that rcu_try_flip_idle() decided + to start a new grace period. "i1" should be roughly equal to + "ie1" plus "g1". + +o "a1" is the number of calls to rcu_try_flip_waitack(). + +o "ae1" is the number of times that rcu_try_flip_waitack() found + that at least one CPU had not yet acknowledge the new grace period + (AKA "counter flip"). + +o "a2" is the number of time rcu_try_flip_waitack() found that + all CPUs had acknowledged. "a1" should be roughly equal to + "ae1" plus "a2". (This particular output was collected on + a 128-CPU machine, hence the smaller-than-usual fraction of + calls to rcu_try_flip_waitack() finding all CPUs having already + acknowledged.) + +o "z1" is the number of calls to rcu_try_flip_waitzero(). + +o "ze1" is the number of times that rcu_try_flip_waitzero() found + that not all of the old RCU read-side critical sections had + completed. + +o "z2" is the number of times that rcu_try_flip_waitzero() finds + the sum of the counters equal to zero, in other words, that + all of the old RCU read-side critical sections had completed. + The value of "z1" should be roughly equal to "ze1" plus + "z2". + +o "m1" is the number of calls to rcu_try_flip_waitmb(). + +o "me1" is the number of times that rcu_try_flip_waitmb() finds + that at least one CPU has not yet executed a memory barrier. + +o "m2" is the number of times that rcu_try_flip_waitmb() finds that + all CPUs have executed a memory barrier. + + +Hierarchical RCU debugfs Files and Formats + +This implementation of RCU provides three debugfs files under the +top-level directory RCU: rcu/rcudata (which displays fields in struct +rcu_data), rcu/rcugp (which displays grace-period counters), and +rcu/rcuhier (which displays the struct rcu_node hierarchy). + +The output of "cat rcu/rcudata" looks as follows: + +rcu: + 0 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=1 rp=3c2a dt=23301/73 dn=2 df=1882 of=0 ri=2126 ql=2 b=10 + 1 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=3 rp=39a6 dt=78073/1 dn=2 df=1402 of=0 ri=1875 ql=46 b=10 + 2 c=4010 g=4010 pq=1 pqc=4010 qp=0 rpfq=-5 rp=1d12 dt=16646/0 dn=2 df=3140 of=0 ri=2080 ql=0 b=10 + 3 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=2b50 dt=21159/1 dn=2 df=2230 of=0 ri=1923 ql=72 b=10 + 4 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1644 dt=5783/1 dn=2 df=3348 of=0 ri=2805 ql=7 b=10 + 5 c=4012 g=4013 pq=0 pqc=4011 qp=1 rpfq=3 rp=1aac dt=5879/1 dn=2 df=3140 of=0 ri=2066 ql=10 b=10 + 6 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=ed8 dt=5847/1 dn=2 df=3797 of=0 ri=1266 ql=10 b=10 + 7 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1fa2 dt=6199/1 dn=2 df=2795 of=0 ri=2162 ql=28 b=10 +rcu_bh: + 0 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-145 rp=21d6 dt=23301/73 dn=2 df=0 of=0 ri=0 ql=0 b=10 + 1 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-170 rp=20ce dt=78073/1 dn=2 df=26 of=0 ri=5 ql=0 b=10 + 2 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-83 rp=fbd dt=16646/0 dn=2 df=28 of=0 ri=4 ql=0 b=10 + 3 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-105 rp=178c dt=21159/1 dn=2 df=28 of=0 ri=2 ql=0 b=10 + 4 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-30 rp=b54 dt=5783/1 dn=2 df=32 of=0 ri=0 ql=0 b=10 + 5 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-29 rp=df5 dt=5879/1 dn=2 df=30 of=0 ri=3 ql=0 b=10 + 6 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-28 rp=788 dt=5847/1 dn=2 df=32 of=0 ri=0 ql=0 b=10 + 7 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-53 rp=1098 dt=6199/1 dn=2 df=30 of=0 ri=3 ql=0 b=10 + +The first section lists the rcu_data structures for rcu, the second for +rcu_bh. Each section has one line per CPU, or eight for this 8-CPU system. +The fields are as follows: + +o The number at the beginning of each line is the CPU number. + CPUs numbers followed by an exclamation mark are offline, + but have been online at least once since boot. There will be + no output for CPUs that have never been online, which can be + a good thing in the surprisingly common case where NR_CPUS is + substantially larger than the number of actual CPUs. + +o "c" is the count of grace periods that this CPU believes have + completed. CPUs in dynticks idle mode may lag quite a ways + behind, for example, CPU 4 under "rcu" above, which has slept + through the past 25 RCU grace periods. It is not unusual to + see CPUs lagging by thousands of grace periods. + +o "g" is the count of grace periods that this CPU believes have + started. Again, CPUs in dynticks idle mode may lag behind. + If the "c" and "g" values are equal, this CPU has already + reported a quiescent state for the last RCU grace period that + it is aware of, otherwise, the CPU believes that it owes RCU a + quiescent state. + +o "pq" indicates that this CPU has passed through a quiescent state + for the current grace period. It is possible for "pq" to be + "1" and "c" different than "g", which indicates that although + the CPU has passed through a quiescent state, either (1) this + CPU has not yet reported that fact, (2) some other CPU has not + yet reported for this grace period, or (3) both. + +o "pqc" indicates which grace period the last-observed quiescent + state for this CPU corresponds to. This is important for handling + the race between CPU 0 reporting an extended dynticks-idle + quiescent state for CPU 1 and CPU 1 suddenly waking up and + reporting its own quiescent state. If CPU 1 was the last CPU + for the current grace period, then the CPU that loses this race + will attempt to incorrectly mark CPU 1 as having checked in for + the next grace period! + +o "qp" indicates that RCU still expects a quiescent state from + this CPU. + +o "rpfq" is the number of rcu_pending() calls on this CPU required + to induce this CPU to invoke force_quiescent_state(). + +o "rp" is low-order four hex digits of the count of how many times + rcu_pending() has been invoked on this CPU. + +o "dt" is the current value of the dyntick counter that is incremented + when entering or leaving dynticks idle state, either by the + scheduler or by irq. The number after the "/" is the interrupt + nesting depth when in dyntick-idle state, or one greater than + the interrupt-nesting depth otherwise. + + This field is displayed only for CONFIG_NO_HZ kernels. + +o "dn" is the current value of the dyntick counter that is incremented + when entering or leaving dynticks idle state via NMI. If both + the "dt" and "dn" values are even, then this CPU is in dynticks + idle mode and may be ignored by RCU. If either of these two + counters is odd, then RCU must be alert to the possibility of + an RCU read-side critical section running on this CPU. + + This field is displayed only for CONFIG_NO_HZ kernels. + +o "df" is the number of times that some other CPU has forced a + quiescent state on behalf of this CPU due to this CPU being in + dynticks-idle state. + + This field is displayed only for CONFIG_NO_HZ kernels. + +o "of" is the number of times that some other CPU has forced a + quiescent state on behalf of this CPU due to this CPU being + offline. In a perfect world, this might neve happen, but it + turns out that offlining and onlining a CPU can take several grace + periods, and so there is likely to be an extended period of time + when RCU believes that the CPU is online when it really is not. + Please note that erring in the other direction (RCU believing a + CPU is offline when it is really alive and kicking) is a fatal + error, so it makes sense to err conservatively. + +o "ri" is the number of times that RCU has seen fit to send a + reschedule IPI to this CPU in order to get it to report a + quiescent state. + +o "ql" is the number of RCU callbacks currently residing on + this CPU. This is the total number of callbacks, regardless + of what state they are in (new, waiting for grace period to + start, waiting for grace period to end, ready to invoke). + +o "b" is the batch limit for this CPU. If more than this number + of RCU callbacks is ready to invoke, then the remainder will + be deferred. + + +The output of "cat rcu/rcugp" looks as follows: + +rcu: completed=33062 gpnum=33063 +rcu_bh: completed=464 gpnum=464 + +Again, this output is for both "rcu" and "rcu_bh". The fields are +taken from the rcu_state structure, and are as follows: + +o "completed" is the number of grace periods that have completed. + It is comparable to the "c" field from rcu/rcudata in that a + CPU whose "c" field matches the value of "completed" is aware + that the corresponding RCU grace period has completed. + +o "gpnum" is the number of grace periods that have started. It is + comparable to the "g" field from rcu/rcudata in that a CPU + whose "g" field matches the value of "gpnum" is aware that the + corresponding RCU grace period has started. + + If these two fields are equal (as they are for "rcu_bh" above), + then there is no grace period in progress, in other words, RCU + is idle. On the other hand, if the two fields differ (as they + do for "rcu" above), then an RCU grace period is in progress. + + +The output of "cat rcu/rcuhier" looks as follows, with very long lines: + +c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6 +1/1 0:127 ^0 +3/3 0:35 ^0 0/0 36:71 ^1 0/0 72:107 ^2 0/0 108:127 ^3 +3/3f 0:5 ^0 2/3 6:11 ^1 0/0 12:17 ^2 0/0 18:23 ^3 0/0 24:29 ^4 0/0 30:35 ^5 0/0 36:41 ^0 0/0 42:47 ^1 0/0 48:53 ^2 0/0 54:59 ^3 0/0 60:65 ^4 0/0 66:71 ^5 0/0 72:77 ^0 0/0 78:83 ^1 0/0 84:89 ^2 0/0 90:95 ^3 0/0 96:101 ^4 0/0 102:107 ^5 0/0 108:113 ^0 0/0 114:119 ^1 0/0 120:125 ^2 0/0 126:127 ^3 +rcu_bh: +c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0 +0/1 0:127 ^0 +0/3 0:35 ^0 0/0 36:71 ^1 0/0 72:107 ^2 0/0 108:127 ^3 +0/3f 0:5 ^0 0/3 6:11 ^1 0/0 12:17 ^2 0/0 18:23 ^3 0/0 24:29 ^4 0/0 30:35 ^5 0/0 36:41 ^0 0/0 42:47 ^1 0/0 48:53 ^2 0/0 54:59 ^3 0/0 60:65 ^4 0/0 66:71 ^5 0/0 72:77 ^0 0/0 78:83 ^1 0/0 84:89 ^2 0/0 90:95 ^3 0/0 96:101 ^4 0/0 102:107 ^5 0/0 108:113 ^0 0/0 114:119 ^1 0/0 120:125 ^2 0/0 126:127 ^3 + +This is once again split into "rcu" and "rcu_bh" portions. The fields are +as follows: + +o "c" is exactly the same as "completed" under rcu/rcugp. + +o "g" is exactly the same as "gpnum" under rcu/rcugp. + +o "s" is the "signaled" state that drives force_quiescent_state()'s + state machine. + +o "jfq" is the number of jiffies remaining for this grace period + before force_quiescent_state() is invoked to help push things + along. Note that CPUs in dyntick-idle mode thoughout the grace + period will not report on their own, but rather must be check by + some other CPU via force_quiescent_state(). + +o "j" is the low-order four hex digits of the jiffies counter. + Yes, Paul did run into a number of problems that turned out to + be due to the jiffies counter no longer counting. Why do you ask? + +o "nfqs" is the number of calls to force_quiescent_state() since + boot. + +o "nfqsng" is the number of useless calls to force_quiescent_state(), + where there wasn't actually a grace period active. This can + happen due to races. The number in parentheses is the difference + between "nfqs" and "nfqsng", or the number of times that + force_quiescent_state() actually did some real work. + +o "fqlh" is the number of calls to force_quiescent_state() that + exited immediately (without even being counted in nfqs above) + due to contention on ->fqslock. + +o Each element of the form "1/1 0:127 ^0" represents one struct + rcu_node. Each line represents one level of the hierarchy, from + root to leaves. It is best to think of the rcu_data structures + as forming yet another level after the leaves. Note that there + might be either one, two, or three levels of rcu_node structures, + depending on the relationship between CONFIG_RCU_FANOUT and + CONFIG_NR_CPUS. + + o The numbers separated by the "/" are the qsmask followed + by the qsmaskinit. The qsmask will have one bit + set for each entity in the next lower level that + has not yet checked in for the current grace period. + The qsmaskinit will have one bit for each entity that is + currently expected to check in during each grace period. + The value of qsmaskinit is assigned to that of qsmask + at the beginning of each grace period. + + For example, for "rcu", the qsmask of the first entry + of the lowest level is 0x14, meaning that we are still + waiting for CPUs 2 and 4 to check in for the current + grace period. + + o The numbers separated by the ":" are the range of CPUs + served by this struct rcu_node. This can be helpful + in working out how the hierarchy is wired together. + + For example, the first entry at the lowest level shows + "0:5", indicating that it covers CPUs 0 through 5. + + o The number after the "^" indicates the bit in the + next higher level rcu_node structure that this + rcu_node structure corresponds to. + + For example, the first entry at the lowest level shows + "^0", indicating that it corresponds to bit zero in + the first entry at the middle level. diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index f4e55be2eea9..afad9f5ac0ac 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -208,6 +208,7 @@ void pSeries_log_error(char *buf, unsigned int err_type, int fatal) break; case ERR_TYPE_KERNEL_PANIC: default: + WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */ spin_unlock_irqrestore(&rtasd_log_lock, s); return; } @@ -227,6 +228,7 @@ void pSeries_log_error(char *buf, unsigned int err_type, int fatal) /* Check to see if we need to or have stopped logging */ if (fatal || !logging_enabled) { logging_enabled = 0; + WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */ spin_unlock_irqrestore(&rtasd_log_lock, s); return; } @@ -249,11 +251,13 @@ void pSeries_log_error(char *buf, unsigned int err_type, int fatal) else rtas_log_start += 1; + WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */ spin_unlock_irqrestore(&rtasd_log_lock, s); wake_up_interruptible(&rtas_log_wait); break; case ERR_TYPE_KERNEL_PANIC: default: + WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */ spin_unlock_irqrestore(&rtasd_log_lock, s); return; } diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 181006cc94a0..9b70b9231693 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -118,13 +118,17 @@ static inline void account_system_vtime(struct task_struct *tsk) } #endif -#if defined(CONFIG_PREEMPT_RCU) && defined(CONFIG_NO_HZ) +#if defined(CONFIG_NO_HZ) && !defined(CONFIG_CLASSIC_RCU) extern void rcu_irq_enter(void); extern void rcu_irq_exit(void); +extern void rcu_nmi_enter(void); +extern void rcu_nmi_exit(void); #else # define rcu_irq_enter() do { } while (0) # define rcu_irq_exit() do { } while (0) -#endif /* CONFIG_PREEMPT_RCU */ +# define rcu_nmi_enter() do { } while (0) +# define rcu_nmi_exit() do { } while (0) +#endif /* #if defined(CONFIG_NO_HZ) && !defined(CONFIG_CLASSIC_RCU) */ /* * It is safe to do non-atomic ops on ->hardirq_context, @@ -134,7 +138,6 @@ extern void rcu_irq_exit(void); */ #define __irq_enter() \ do { \ - rcu_irq_enter(); \ account_system_vtime(current); \ add_preempt_count(HARDIRQ_OFFSET); \ trace_hardirq_enter(); \ @@ -153,7 +156,6 @@ extern void irq_enter(void); trace_hardirq_exit(); \ account_system_vtime(current); \ sub_preempt_count(HARDIRQ_OFFSET); \ - rcu_irq_exit(); \ } while (0) /* @@ -161,7 +163,7 @@ extern void irq_enter(void); */ extern void irq_exit(void); -#define nmi_enter() do { lockdep_off(); __irq_enter(); } while (0) -#define nmi_exit() do { __irq_exit(); lockdep_on(); } while (0) +#define nmi_enter() do { lockdep_off(); rcu_nmi_enter(); __irq_enter(); } while (0) +#define nmi_exit() do { __irq_exit(); rcu_nmi_exit(); lockdep_on(); } while (0) #endif /* LINUX_HARDIRQ_H */ diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 86f1f5e43e33..bfd289aff576 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -52,11 +52,15 @@ struct rcu_head { void (*func)(struct rcu_head *head); }; -#ifdef CONFIG_CLASSIC_RCU +#if defined(CONFIG_CLASSIC_RCU) #include -#else /* #ifdef CONFIG_CLASSIC_RCU */ +#elif defined(CONFIG_TREE_RCU) +#include +#elif defined(CONFIG_PREEMPT_RCU) #include -#endif /* #else #ifdef CONFIG_CLASSIC_RCU */ +#else +#error "Unknown RCU implementation specified to kernel configuration" +#endif /* #else #if defined(CONFIG_CLASSIC_RCU) */ #define RCU_HEAD_INIT { .next = NULL, .func = NULL } #define RCU_HEAD(head) struct rcu_head head = RCU_HEAD_INIT diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h new file mode 100644 index 000000000000..d4368b7975c3 --- /dev/null +++ b/include/linux/rcutree.h @@ -0,0 +1,329 @@ +/* + * Read-Copy Update mechanism for mutual exclusion (tree-based version) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright IBM Corporation, 2008 + * + * Author: Dipankar Sarma + * Paul E. McKenney Hierarchical algorithm + * + * Based on the original work by Paul McKenney + * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen. + * + * For detailed explanation of Read-Copy Update mechanism see - + * Documentation/RCU + */ + +#ifndef __LINUX_RCUTREE_H +#define __LINUX_RCUTREE_H + +#include +#include +#include +#include +#include +#include + +/* + * Define shape of hierarchy based on NR_CPUS and CONFIG_RCU_FANOUT. + * In theory, it should be possible to add more levels straightforwardly. + * In practice, this has not been tested, so there is probably some + * bug somewhere. + */ +#define MAX_RCU_LVLS 3 +#define RCU_FANOUT (CONFIG_RCU_FANOUT) +#define RCU_FANOUT_SQ (RCU_FANOUT * RCU_FANOUT) +#define RCU_FANOUT_CUBE (RCU_FANOUT_SQ * RCU_FANOUT) + +#if NR_CPUS <= RCU_FANOUT +# define NUM_RCU_LVLS 1 +# define NUM_RCU_LVL_0 1 +# define NUM_RCU_LVL_1 (NR_CPUS) +# define NUM_RCU_LVL_2 0 +# define NUM_RCU_LVL_3 0 +#elif NR_CPUS <= RCU_FANOUT_SQ +# define NUM_RCU_LVLS 2 +# define NUM_RCU_LVL_0 1 +# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT - 1) / RCU_FANOUT) +# define NUM_RCU_LVL_2 (NR_CPUS) +# define NUM_RCU_LVL_3 0 +#elif NR_CPUS <= RCU_FANOUT_CUBE +# define NUM_RCU_LVLS 3 +# define NUM_RCU_LVL_0 1 +# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT_SQ - 1) / RCU_FANOUT_SQ) +# define NUM_RCU_LVL_2 (((NR_CPUS) + (RCU_FANOUT) - 1) / (RCU_FANOUT)) +# define NUM_RCU_LVL_3 NR_CPUS +#else +# error "CONFIG_RCU_FANOUT insufficient for NR_CPUS" +#endif /* #if (NR_CPUS) <= RCU_FANOUT */ + +#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3) +#define NUM_RCU_NODES (RCU_SUM - NR_CPUS) + +/* + * Dynticks per-CPU state. + */ +struct rcu_dynticks { + int dynticks_nesting; /* Track nesting level, sort of. */ + int dynticks; /* Even value for dynticks-idle, else odd. */ + int dynticks_nmi; /* Even value for either dynticks-idle or */ + /* not in nmi handler, else odd. So this */ + /* remains even for nmi from irq handler. */ +}; + +/* + * Definition for node within the RCU grace-period-detection hierarchy. + */ +struct rcu_node { + spinlock_t lock; + unsigned long qsmask; /* CPUs or groups that need to switch in */ + /* order for current grace period to proceed.*/ + unsigned long qsmaskinit; + /* Per-GP initialization for qsmask. */ + unsigned long grpmask; /* Mask to apply to parent qsmask. */ + int grplo; /* lowest-numbered CPU or group here. */ + int grphi; /* highest-numbered CPU or group here. */ + u8 grpnum; /* CPU/group number for next level up. */ + u8 level; /* root is at level 0. */ + struct rcu_node *parent; +} ____cacheline_internodealigned_in_smp; + +/* Index values for nxttail array in struct rcu_data. */ +#define RCU_DONE_TAIL 0 /* Also RCU_WAIT head. */ +#define RCU_WAIT_TAIL 1 /* Also RCU_NEXT_READY head. */ +#define RCU_NEXT_READY_TAIL 2 /* Also RCU_NEXT head. */ +#define RCU_NEXT_TAIL 3 +#define RCU_NEXT_SIZE 4 + +/* Per-CPU data for read-copy update. */ +struct rcu_data { + /* 1) quiescent-state and grace-period handling : */ + long completed; /* Track rsp->completed gp number */ + /* in order to detect GP end. */ + long gpnum; /* Highest gp number that this CPU */ + /* is aware of having started. */ + long passed_quiesc_completed; + /* Value of completed at time of qs. */ + bool passed_quiesc; /* User-mode/idle loop etc. */ + bool qs_pending; /* Core waits for quiesc state. */ + bool beenonline; /* CPU online at least once. */ + struct rcu_node *mynode; /* This CPU's leaf of hierarchy */ + unsigned long grpmask; /* Mask to apply to leaf qsmask. */ + + /* 2) batch handling */ + /* + * If nxtlist is not NULL, it is partitioned as follows. + * Any of the partitions might be empty, in which case the + * pointer to that partition will be equal to the pointer for + * the following partition. When the list is empty, all of + * the nxttail elements point to nxtlist, which is NULL. + * + * [*nxttail[RCU_NEXT_READY_TAIL], NULL = *nxttail[RCU_NEXT_TAIL]): + * Entries that might have arrived after current GP ended + * [*nxttail[RCU_WAIT_TAIL], *nxttail[RCU_NEXT_READY_TAIL]): + * Entries known to have arrived before current GP ended + * [*nxttail[RCU_DONE_TAIL], *nxttail[RCU_WAIT_TAIL]): + * Entries that batch # <= ->completed - 1: waiting for current GP + * [nxtlist, *nxttail[RCU_DONE_TAIL]): + * Entries that batch # <= ->completed + * The grace period for these entries has completed, and + * the other grace-period-completed entries may be moved + * here temporarily in rcu_process_callbacks(). + */ + struct rcu_head *nxtlist; + struct rcu_head **nxttail[RCU_NEXT_SIZE]; + long qlen; /* # of queued callbacks */ + long blimit; /* Upper limit on a processed batch */ + +#ifdef CONFIG_NO_HZ + /* 3) dynticks interface. */ + struct rcu_dynticks *dynticks; /* Shared per-CPU dynticks state. */ + int dynticks_snap; /* Per-GP tracking for dynticks. */ + int dynticks_nmi_snap; /* Per-GP tracking for dynticks_nmi. */ +#endif /* #ifdef CONFIG_NO_HZ */ + + /* 4) reasons this CPU needed to be kicked by force_quiescent_state */ +#ifdef CONFIG_NO_HZ + unsigned long dynticks_fqs; /* Kicked due to dynticks idle. */ +#endif /* #ifdef CONFIG_NO_HZ */ + unsigned long offline_fqs; /* Kicked due to being offline. */ + unsigned long resched_ipi; /* Sent a resched IPI. */ + + /* 5) state to allow this CPU to force_quiescent_state on others */ + long n_rcu_pending; /* rcu_pending() calls since boot. */ + long n_rcu_pending_force_qs; /* when to force quiescent states. */ + + int cpu; +}; + +/* Values for signaled field in struct rcu_state. */ +#define RCU_GP_INIT 0 /* Grace period being initialized. */ +#define RCU_SAVE_DYNTICK 1 /* Need to scan dyntick state. */ +#define RCU_FORCE_QS 2 /* Need to force quiescent state. */ +#ifdef CONFIG_NO_HZ +#define RCU_SIGNAL_INIT RCU_SAVE_DYNTICK +#else /* #ifdef CONFIG_NO_HZ */ +#define RCU_SIGNAL_INIT RCU_FORCE_QS +#endif /* #else #ifdef CONFIG_NO_HZ */ + +#define RCU_JIFFIES_TILL_FORCE_QS 3 /* for rsp->jiffies_force_qs */ +#ifdef CONFIG_RCU_CPU_STALL_DETECTOR +#define RCU_SECONDS_TILL_STALL_CHECK (10 * HZ) /* for rsp->jiffies_stall */ +#define RCU_SECONDS_TILL_STALL_RECHECK (30 * HZ) /* for rsp->jiffies_stall */ +#define RCU_STALL_RAT_DELAY 2 /* Allow other CPUs time */ + /* to take at least one */ + /* scheduling clock irq */ + /* before ratting on them. */ + +#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */ + +/* + * RCU global state, including node hierarchy. This hierarchy is + * represented in "heap" form in a dense array. The root (first level) + * of the hierarchy is in ->node[0] (referenced by ->level[0]), the second + * level in ->node[1] through ->node[m] (->node[1] referenced by ->level[1]), + * and the third level in ->node[m+1] and following (->node[m+1] referenced + * by ->level[2]). The number of levels is determined by the number of + * CPUs and by CONFIG_RCU_FANOUT. Small systems will have a "hierarchy" + * consisting of a single rcu_node. + */ +struct rcu_state { + struct rcu_node node[NUM_RCU_NODES]; /* Hierarchy. */ + struct rcu_node *level[NUM_RCU_LVLS]; /* Hierarchy levels. */ + u32 levelcnt[MAX_RCU_LVLS + 1]; /* # nodes in each level. */ + u8 levelspread[NUM_RCU_LVLS]; /* kids/node in each level. */ + struct rcu_data *rda[NR_CPUS]; /* array of rdp pointers. */ + + /* The following fields are guarded by the root rcu_node's lock. */ + + u8 signaled ____cacheline_internodealigned_in_smp; + /* Force QS state. */ + long gpnum; /* Current gp number. */ + long completed; /* # of last completed gp. */ + spinlock_t onofflock; /* exclude on/offline and */ + /* starting new GP. */ + spinlock_t fqslock; /* Only one task forcing */ + /* quiescent states. */ + unsigned long jiffies_force_qs; /* Time at which to invoke */ + /* force_quiescent_state(). */ + unsigned long n_force_qs; /* Number of calls to */ + /* force_quiescent_state(). */ + unsigned long n_force_qs_lh; /* ~Number of calls leaving */ + /* due to lock unavailable. */ + unsigned long n_force_qs_ngp; /* Number of calls leaving */ + /* due to no GP active. */ +#ifdef CONFIG_RCU_CPU_STALL_DETECTOR + unsigned long gp_start; /* Time at which GP started, */ + /* but in jiffies. */ + unsigned long jiffies_stall; /* Time at which to check */ + /* for CPU stalls. */ +#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */ +#ifdef CONFIG_NO_HZ + long dynticks_completed; /* Value of completed @ snap. */ +#endif /* #ifdef CONFIG_NO_HZ */ +}; + +extern struct rcu_state rcu_state; +DECLARE_PER_CPU(struct rcu_data, rcu_data); + +extern struct rcu_state rcu_bh_state; +DECLARE_PER_CPU(struct rcu_data, rcu_bh_data); + +/* + * Increment the quiescent state counter. + * The counter is a bit degenerated: We do not need to know + * how many quiescent states passed, just if there was at least + * one since the start of the grace period. Thus just a flag. + */ +static inline void rcu_qsctr_inc(int cpu) +{ + struct rcu_data *rdp = &per_cpu(rcu_data, cpu); + rdp->passed_quiesc = 1; + rdp->passed_quiesc_completed = rdp->completed; +} +static inline void rcu_bh_qsctr_inc(int cpu) +{ + struct rcu_data *rdp = &per_cpu(rcu_bh_data, cpu); + rdp->passed_quiesc = 1; + rdp->passed_quiesc_completed = rdp->completed; +} + +extern int rcu_pending(int cpu); +extern int rcu_needs_cpu(int cpu); + +#ifdef CONFIG_DEBUG_LOCK_ALLOC +extern struct lockdep_map rcu_lock_map; +# define rcu_read_acquire() \ + lock_acquire(&rcu_lock_map, 0, 0, 2, 1, NULL, _THIS_IP_) +# define rcu_read_release() lock_release(&rcu_lock_map, 1, _THIS_IP_) +#else +# define rcu_read_acquire() do { } while (0) +# define rcu_read_release() do { } while (0) +#endif + +static inline void __rcu_read_lock(void) +{ + preempt_disable(); + __acquire(RCU); + rcu_read_acquire(); +} +static inline void __rcu_read_unlock(void) +{ + rcu_read_release(); + __release(RCU); + preempt_enable(); +} +static inline void __rcu_read_lock_bh(void) +{ + local_bh_disable(); + __acquire(RCU_BH); + rcu_read_acquire(); +} +static inline void __rcu_read_unlock_bh(void) +{ + rcu_read_release(); + __release(RCU_BH); + local_bh_enable(); +} + +#define __synchronize_sched() synchronize_rcu() + +#define call_rcu_sched(head, func) call_rcu(head, func) + +static inline void rcu_init_sched(void) +{ +} + +extern void __rcu_init(void); +extern void rcu_check_callbacks(int cpu, int user); +extern void rcu_restart_cpu(int cpu); + +extern long rcu_batches_completed(void); +extern long rcu_batches_completed_bh(void); + +#ifdef CONFIG_NO_HZ +void rcu_enter_nohz(void); +void rcu_exit_nohz(void); +#else /* CONFIG_NO_HZ */ +static inline void rcu_enter_nohz(void) +{ +} +static inline void rcu_exit_nohz(void) +{ +} +#endif /* CONFIG_NO_HZ */ + +#endif /* __LINUX_RCUTREE_H */ diff --git a/init/Kconfig b/init/Kconfig index f763762d544a..9dd7958a71f0 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -928,10 +928,16 @@ source "block/Kconfig" config PREEMPT_NOTIFIERS bool -config CLASSIC_RCU - def_bool !PREEMPT_RCU +config TREE_RCU_TRACE + def_bool RCU_TRACE && TREE_RCU + select DEBUG_FS help - This option selects the classic RCU implementation that is - designed for best read-side performance on non-realtime - systems. Classic RCU is the default. Note that the - PREEMPT_RCU symbol is used to select/deselect this option. + This option provides tracing for the TREE_RCU implementation, + permitting Makefile to trivially select kernel/rcutree_trace.c. + +config PREEMPT_RCU_TRACE + def_bool RCU_TRACE && PREEMPT_RCU + select DEBUG_FS + help + This option provides tracing for the PREEMPT_RCU implementation, + permitting Makefile to trivially select kernel/rcupreempt_trace.c. diff --git a/kernel/Kconfig.preempt b/kernel/Kconfig.preempt index 9fdba03dc1fc..463f29743ea0 100644 --- a/kernel/Kconfig.preempt +++ b/kernel/Kconfig.preempt @@ -52,10 +52,29 @@ config PREEMPT endchoice +choice + prompt "RCU Implementation" + default CLASSIC_RCU + +config CLASSIC_RCU + bool "Classic RCU" + help + This option selects the classic RCU implementation that is + designed for best read-side performance on non-realtime + systems. + + Select this option if you are unsure. + +config TREE_RCU + bool "Tree-based hierarchical RCU" + help + This option selects the RCU implementation that is + designed for very large SMP system with hundreds or + thousands of CPUs. + config PREEMPT_RCU bool "Preemptible RCU" depends on PREEMPT - default n help This option reduces the latency of the kernel by making certain RCU sections preemptible. Normally RCU code is non-preemptible, if @@ -64,16 +83,47 @@ config PREEMPT_RCU now-naive assumptions about each RCU read-side critical section remaining on a given CPU through its execution. - Say N if you are unsure. +endchoice config RCU_TRACE - bool "Enable tracing for RCU - currently stats in debugfs" - depends on PREEMPT_RCU - select DEBUG_FS - default y + bool "Enable tracing for RCU" + depends on TREE_RCU || PREEMPT_RCU help This option provides tracing in RCU which presents stats in debugfs for debugging RCU implementation. Say Y here if you want to enable RCU tracing Say N if you are unsure. + +config RCU_FANOUT + int "Tree-based hierarchical RCU fanout value" + range 2 64 if 64BIT + range 2 32 if !64BIT + depends on TREE_RCU + default 64 if 64BIT + default 32 if !64BIT + help + This option controls the fanout of hierarchical implementations + of RCU, allowing RCU to work efficiently on machines with + large numbers of CPUs. This value must be at least the cube + root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit + systems and up to 262,144 for 64-bit systems. + + Select a specific number if testing RCU itself. + Take the default if unsure. + +config RCU_FANOUT_EXACT + bool "Disable tree-based hierarchical RCU auto-balancing" + depends on TREE_RCU + default n + help + This option forces use of the exact RCU_FANOUT value specified, + regardless of imbalances in the hierarchy. This is useful for + testing RCU itself, and might one day be useful on systems with + strong NUMA behavior. + + Without RCU_FANOUT_EXACT, the code will balance the hierarchy. + + Say n if unsure. + + diff --git a/kernel/Makefile b/kernel/Makefile index 19fad003b19d..b4fdbbff5ec0 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -74,10 +74,10 @@ obj-$(CONFIG_GENERIC_HARDIRQS) += irq/ obj-$(CONFIG_SECCOMP) += seccomp.o obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o obj-$(CONFIG_CLASSIC_RCU) += rcuclassic.o +obj-$(CONFIG_TREE_RCU) += rcutree.o obj-$(CONFIG_PREEMPT_RCU) += rcupreempt.o -ifeq ($(CONFIG_PREEMPT_RCU),y) -obj-$(CONFIG_RCU_TRACE) += rcupreempt_trace.o -endif +obj-$(CONFIG_TREE_RCU_TRACE) += rcutree_trace.o +obj-$(CONFIG_PREEMPT_RCU_TRACE) += rcupreempt_trace.o obj-$(CONFIG_RELAY) += relay.o obj-$(CONFIG_SYSCTL) += utsname_sysctl.o obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index 59236e8b9daa..04982659875a 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -551,6 +551,16 @@ void rcu_irq_exit(void) } } +void rcu_nmi_enter(void) +{ + rcu_irq_enter(); +} + +void rcu_nmi_exit(void) +{ + rcu_irq_exit(); +} + static void dyntick_save_progress_counter(int cpu) { struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); diff --git a/kernel/rcupreempt_trace.c b/kernel/rcupreempt_trace.c index 35c2d3360ecf..7c2665cac172 100644 --- a/kernel/rcupreempt_trace.c +++ b/kernel/rcupreempt_trace.c @@ -149,12 +149,12 @@ static void rcupreempt_trace_sum(struct rcupreempt_trace *sp) sp->done_length += cp->done_length; sp->done_add += cp->done_add; sp->done_remove += cp->done_remove; - atomic_set(&sp->done_invoked, atomic_read(&cp->done_invoked)); + atomic_add(atomic_read(&cp->done_invoked), &sp->done_invoked); sp->rcu_check_callbacks += cp->rcu_check_callbacks; - atomic_set(&sp->rcu_try_flip_1, - atomic_read(&cp->rcu_try_flip_1)); - atomic_set(&sp->rcu_try_flip_e1, - atomic_read(&cp->rcu_try_flip_e1)); + atomic_add(atomic_read(&cp->rcu_try_flip_1), + &sp->rcu_try_flip_1); + atomic_add(atomic_read(&cp->rcu_try_flip_e1), + &sp->rcu_try_flip_e1); sp->rcu_try_flip_i1 += cp->rcu_try_flip_i1; sp->rcu_try_flip_ie1 += cp->rcu_try_flip_ie1; sp->rcu_try_flip_g1 += cp->rcu_try_flip_g1; diff --git a/kernel/rcutree.c b/kernel/rcutree.c new file mode 100644 index 000000000000..a342b032112c --- /dev/null +++ b/kernel/rcutree.c @@ -0,0 +1,1535 @@ +/* + * Read-Copy Update mechanism for mutual exclusion + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright IBM Corporation, 2008 + * + * Authors: Dipankar Sarma + * Manfred Spraul + * Paul E. McKenney Hierarchical version + * + * Based on the original work by Paul McKenney + * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen. + * + * For detailed explanation of Read-Copy Update mechanism see - + * Documentation/RCU + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_DEBUG_LOCK_ALLOC +static struct lock_class_key rcu_lock_key; +struct lockdep_map rcu_lock_map = + STATIC_LOCKDEP_MAP_INIT("rcu_read_lock", &rcu_lock_key); +EXPORT_SYMBOL_GPL(rcu_lock_map); +#endif + +/* Data structures. */ + +#define RCU_STATE_INITIALIZER(name) { \ + .level = { &name.node[0] }, \ + .levelcnt = { \ + NUM_RCU_LVL_0, /* root of hierarchy. */ \ + NUM_RCU_LVL_1, \ + NUM_RCU_LVL_2, \ + NUM_RCU_LVL_3, /* == MAX_RCU_LVLS */ \ + }, \ + .signaled = RCU_SIGNAL_INIT, \ + .gpnum = -300, \ + .completed = -300, \ + .onofflock = __SPIN_LOCK_UNLOCKED(&name.onofflock), \ + .fqslock = __SPIN_LOCK_UNLOCKED(&name.fqslock), \ + .n_force_qs = 0, \ + .n_force_qs_ngp = 0, \ +} + +struct rcu_state rcu_state = RCU_STATE_INITIALIZER(rcu_state); +DEFINE_PER_CPU(struct rcu_data, rcu_data); + +struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh_state); +DEFINE_PER_CPU(struct rcu_data, rcu_bh_data); + +#ifdef CONFIG_NO_HZ +DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks); +#endif /* #ifdef CONFIG_NO_HZ */ + +static int blimit = 10; /* Maximum callbacks per softirq. */ +static int qhimark = 10000; /* If this many pending, ignore blimit. */ +static int qlowmark = 100; /* Once only this many pending, use blimit. */ + +static void force_quiescent_state(struct rcu_state *rsp, int relaxed); + +/* + * Return the number of RCU batches processed thus far for debug & stats. + */ +long rcu_batches_completed(void) +{ + return rcu_state.completed; +} +EXPORT_SYMBOL_GPL(rcu_batches_completed); + +/* + * Return the number of RCU BH batches processed thus far for debug & stats. + */ +long rcu_batches_completed_bh(void) +{ + return rcu_bh_state.completed; +} +EXPORT_SYMBOL_GPL(rcu_batches_completed_bh); + +/* + * Does the CPU have callbacks ready to be invoked? + */ +static int +cpu_has_callbacks_ready_to_invoke(struct rcu_data *rdp) +{ + return &rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]; +} + +/* + * Does the current CPU require a yet-as-unscheduled grace period? + */ +static int +cpu_needs_another_gp(struct rcu_state *rsp, struct rcu_data *rdp) +{ + /* ACCESS_ONCE() because we are accessing outside of lock. */ + return *rdp->nxttail[RCU_DONE_TAIL] && + ACCESS_ONCE(rsp->completed) == ACCESS_ONCE(rsp->gpnum); +} + +/* + * Return the root node of the specified rcu_state structure. + */ +static struct rcu_node *rcu_get_root(struct rcu_state *rsp) +{ + return &rsp->node[0]; +} + +#ifdef CONFIG_SMP + +/* + * If the specified CPU is offline, tell the caller that it is in + * a quiescent state. Otherwise, whack it with a reschedule IPI. + * Grace periods can end up waiting on an offline CPU when that + * CPU is in the process of coming online -- it will be added to the + * rcu_node bitmasks before it actually makes it online. The same thing + * can happen while a CPU is in the process of coming online. Because this + * race is quite rare, we check for it after detecting that the grace + * period has been delayed rather than checking each and every CPU + * each and every time we start a new grace period. + */ +static int rcu_implicit_offline_qs(struct rcu_data *rdp) +{ + /* + * If the CPU is offline, it is in a quiescent state. We can + * trust its state not to change because interrupts are disabled. + */ + if (cpu_is_offline(rdp->cpu)) { + rdp->offline_fqs++; + return 1; + } + + /* The CPU is online, so send it a reschedule IPI. */ + if (rdp->cpu != smp_processor_id()) + smp_send_reschedule(rdp->cpu); + else + set_need_resched(); + rdp->resched_ipi++; + return 0; +} + +#endif /* #ifdef CONFIG_SMP */ + +#ifdef CONFIG_NO_HZ +static DEFINE_RATELIMIT_STATE(rcu_rs, 10 * HZ, 5); + +/** + * rcu_enter_nohz - inform RCU that current CPU is entering nohz + * + * Enter nohz mode, in other words, -leave- the mode in which RCU + * read-side critical sections can occur. (Though RCU read-side + * critical sections can occur in irq handlers in nohz mode, a possibility + * handled by rcu_irq_enter() and rcu_irq_exit()). + */ +void rcu_enter_nohz(void) +{ + unsigned long flags; + struct rcu_dynticks *rdtp; + + smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */ + local_irq_save(flags); + rdtp = &__get_cpu_var(rcu_dynticks); + rdtp->dynticks++; + rdtp->dynticks_nesting--; + WARN_ON_RATELIMIT(rdtp->dynticks & 0x1, &rcu_rs); + local_irq_restore(flags); +} + +/* + * rcu_exit_nohz - inform RCU that current CPU is leaving nohz + * + * Exit nohz mode, in other words, -enter- the mode in which RCU + * read-side critical sections normally occur. + */ +void rcu_exit_nohz(void) +{ + unsigned long flags; + struct rcu_dynticks *rdtp; + + local_irq_save(flags); + rdtp = &__get_cpu_var(rcu_dynticks); + rdtp->dynticks++; + rdtp->dynticks_nesting++; + WARN_ON_RATELIMIT(!(rdtp->dynticks & 0x1), &rcu_rs); + local_irq_restore(flags); + smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */ +} + +/** + * rcu_nmi_enter - inform RCU of entry to NMI context + * + * If the CPU was idle with dynamic ticks active, and there is no + * irq handler running, this updates rdtp->dynticks_nmi to let the + * RCU grace-period handling know that the CPU is active. + */ +void rcu_nmi_enter(void) +{ + struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); + + if (rdtp->dynticks & 0x1) + return; + rdtp->dynticks_nmi++; + WARN_ON_RATELIMIT(!(rdtp->dynticks_nmi & 0x1), &rcu_rs); + smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */ +} + +/** + * rcu_nmi_exit - inform RCU of exit from NMI context + * + * If the CPU was idle with dynamic ticks active, and there is no + * irq handler running, this updates rdtp->dynticks_nmi to let the + * RCU grace-period handling know that the CPU is no longer active. + */ +void rcu_nmi_exit(void) +{ + struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); + + if (rdtp->dynticks & 0x1) + return; + smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */ + rdtp->dynticks_nmi++; + WARN_ON_RATELIMIT(rdtp->dynticks_nmi & 0x1, &rcu_rs); +} + +/** + * rcu_irq_enter - inform RCU of entry to hard irq context + * + * If the CPU was idle with dynamic ticks active, this updates the + * rdtp->dynticks to let the RCU handling know that the CPU is active. + */ +void rcu_irq_enter(void) +{ + struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); + + if (rdtp->dynticks_nesting++) + return; + rdtp->dynticks++; + WARN_ON_RATELIMIT(!(rdtp->dynticks & 0x1), &rcu_rs); + smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */ +} + +/** + * rcu_irq_exit - inform RCU of exit from hard irq context + * + * If the CPU was idle with dynamic ticks active, update the rdp->dynticks + * to put let the RCU handling be aware that the CPU is going back to idle + * with no ticks. + */ +void rcu_irq_exit(void) +{ + struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); + + if (--rdtp->dynticks_nesting) + return; + smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */ + rdtp->dynticks++; + WARN_ON_RATELIMIT(rdtp->dynticks & 0x1, &rcu_rs); + + /* If the interrupt queued a callback, get out of dyntick mode. */ + if (__get_cpu_var(rcu_data).nxtlist || + __get_cpu_var(rcu_bh_data).nxtlist) + set_need_resched(); +} + +/* + * Record the specified "completed" value, which is later used to validate + * dynticks counter manipulations. Specify "rsp->completed - 1" to + * unconditionally invalidate any future dynticks manipulations (which is + * useful at the beginning of a grace period). + */ +static void dyntick_record_completed(struct rcu_state *rsp, long comp) +{ + rsp->dynticks_completed = comp; +} + +#ifdef CONFIG_SMP + +/* + * Recall the previously recorded value of the completion for dynticks. + */ +static long dyntick_recall_completed(struct rcu_state *rsp) +{ + return rsp->dynticks_completed; +} + +/* + * Snapshot the specified CPU's dynticks counter so that we can later + * credit them with an implicit quiescent state. Return 1 if this CPU + * is already in a quiescent state courtesy of dynticks idle mode. + */ +static int dyntick_save_progress_counter(struct rcu_data *rdp) +{ + int ret; + int snap; + int snap_nmi; + + snap = rdp->dynticks->dynticks; + snap_nmi = rdp->dynticks->dynticks_nmi; + smp_mb(); /* Order sampling of snap with end of grace period. */ + rdp->dynticks_snap = snap; + rdp->dynticks_nmi_snap = snap_nmi; + ret = ((snap & 0x1) == 0) && ((snap_nmi & 0x1) == 0); + if (ret) + rdp->dynticks_fqs++; + return ret; +} + +/* + * Return true if the specified CPU has passed through a quiescent + * state by virtue of being in or having passed through an dynticks + * idle state since the last call to dyntick_save_progress_counter() + * for this same CPU. + */ +static int rcu_implicit_dynticks_qs(struct rcu_data *rdp) +{ + long curr; + long curr_nmi; + long snap; + long snap_nmi; + + curr = rdp->dynticks->dynticks; + snap = rdp->dynticks_snap; + curr_nmi = rdp->dynticks->dynticks_nmi; + snap_nmi = rdp->dynticks_nmi_snap; + smp_mb(); /* force ordering with cpu entering/leaving dynticks. */ + + /* + * If the CPU passed through or entered a dynticks idle phase with + * no active irq/NMI handlers, then we can safely pretend that the CPU + * already acknowledged the request to pass through a quiescent + * state. Either way, that CPU cannot possibly be in an RCU + * read-side critical section that started before the beginning + * of the current RCU grace period. + */ + if ((curr != snap || (curr & 0x1) == 0) && + (curr_nmi != snap_nmi || (curr_nmi & 0x1) == 0)) { + rdp->dynticks_fqs++; + return 1; + } + + /* Go check for the CPU being offline. */ + return rcu_implicit_offline_qs(rdp); +} + +#endif /* #ifdef CONFIG_SMP */ + +#else /* #ifdef CONFIG_NO_HZ */ + +static void dyntick_record_completed(struct rcu_state *rsp, long comp) +{ +} + +#ifdef CONFIG_SMP + +/* + * If there are no dynticks, then the only way that a CPU can passively + * be in a quiescent state is to be offline. Unlike dynticks idle, which + * is a point in time during the prior (already finished) grace period, + * an offline CPU is always in a quiescent state, and thus can be + * unconditionally applied. So just return the current value of completed. + */ +static long dyntick_recall_completed(struct rcu_state *rsp) +{ + return rsp->completed; +} + +static int dyntick_save_progress_counter(struct rcu_data *rdp) +{ + return 0; +} + +static int rcu_implicit_dynticks_qs(struct rcu_data *rdp) +{ + return rcu_implicit_offline_qs(rdp); +} + +#endif /* #ifdef CONFIG_SMP */ + +#endif /* #else #ifdef CONFIG_NO_HZ */ + +#ifdef CONFIG_RCU_CPU_STALL_DETECTOR + +static void record_gp_stall_check_time(struct rcu_state *rsp) +{ + rsp->gp_start = jiffies; + rsp->jiffies_stall = jiffies + RCU_SECONDS_TILL_STALL_CHECK; +} + +static void print_other_cpu_stall(struct rcu_state *rsp) +{ + int cpu; + long delta; + unsigned long flags; + struct rcu_node *rnp = rcu_get_root(rsp); + struct rcu_node *rnp_cur = rsp->level[NUM_RCU_LVLS - 1]; + struct rcu_node *rnp_end = &rsp->node[NUM_RCU_NODES]; + + /* Only let one CPU complain about others per time interval. */ + + spin_lock_irqsave(&rnp->lock, flags); + delta = jiffies - rsp->jiffies_stall; + if (delta < RCU_STALL_RAT_DELAY || rsp->gpnum == rsp->completed) { + spin_unlock_irqrestore(&rnp->lock, flags); + return; + } + rsp->jiffies_stall = jiffies + RCU_SECONDS_TILL_STALL_RECHECK; + spin_unlock_irqrestore(&rnp->lock, flags); + + /* OK, time to rat on our buddy... */ + + printk(KERN_ERR "INFO: RCU detected CPU stalls:"); + for (; rnp_cur < rnp_end; rnp_cur++) { + if (rnp_cur->qsmask == 0) + continue; + for (cpu = 0; cpu <= rnp_cur->grphi - rnp_cur->grplo; cpu++) + if (rnp_cur->qsmask & (1UL << cpu)) + printk(" %d", rnp_cur->grplo + cpu); + } + printk(" (detected by %d, t=%ld jiffies)\n", + smp_processor_id(), (long)(jiffies - rsp->gp_start)); + force_quiescent_state(rsp, 0); /* Kick them all. */ +} + +static void print_cpu_stall(struct rcu_state *rsp) +{ + unsigned long flags; + struct rcu_node *rnp = rcu_get_root(rsp); + + printk(KERN_ERR "INFO: RCU detected CPU %d stall (t=%lu jiffies)\n", + smp_processor_id(), jiffies - rsp->gp_start); + dump_stack(); + spin_lock_irqsave(&rnp->lock, flags); + if ((long)(jiffies - rsp->jiffies_stall) >= 0) + rsp->jiffies_stall = + jiffies + RCU_SECONDS_TILL_STALL_RECHECK; + spin_unlock_irqrestore(&rnp->lock, flags); + set_need_resched(); /* kick ourselves to get things going. */ +} + +static void check_cpu_stall(struct rcu_state *rsp, struct rcu_data *rdp) +{ + long delta; + struct rcu_node *rnp; + + delta = jiffies - rsp->jiffies_stall; + rnp = rdp->mynode; + if ((rnp->qsmask & rdp->grpmask) && delta >= 0) { + + /* We haven't checked in, so go dump stack. */ + print_cpu_stall(rsp); + + } else if (rsp->gpnum != rsp->completed && + delta >= RCU_STALL_RAT_DELAY) { + + /* They had two time units to dump stack, so complain. */ + print_other_cpu_stall(rsp); + } +} + +#else /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */ + +static void record_gp_stall_check_time(struct rcu_state *rsp) +{ +} + +static void check_cpu_stall(struct rcu_state *rsp, struct rcu_data *rdp) +{ +} + +#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */ + +/* + * Update CPU-local rcu_data state to record the newly noticed grace period. + * This is used both when we started the grace period and when we notice + * that someone else started the grace period. + */ +static void note_new_gpnum(struct rcu_state *rsp, struct rcu_data *rdp) +{ + rdp->qs_pending = 1; + rdp->passed_quiesc = 0; + rdp->gpnum = rsp->gpnum; + rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending + + RCU_JIFFIES_TILL_FORCE_QS; +} + +/* + * Did someone else start a new RCU grace period start since we last + * checked? Update local state appropriately if so. Must be called + * on the CPU corresponding to rdp. + */ +static int +check_for_new_grace_period(struct rcu_state *rsp, struct rcu_data *rdp) +{ + unsigned long flags; + int ret = 0; + + local_irq_save(flags); + if (rdp->gpnum != rsp->gpnum) { + note_new_gpnum(rsp, rdp); + ret = 1; + } + local_irq_restore(flags); + return ret; +} + +/* + * Start a new RCU grace period if warranted, re-initializing the hierarchy + * in preparation for detecting the next grace period. The caller must hold + * the root node's ->lock, which is released before return. Hard irqs must + * be disabled. + */ +static void +rcu_start_gp(struct rcu_state *rsp, unsigned long flags) + __releases(rcu_get_root(rsp)->lock) +{ + struct rcu_data *rdp = rsp->rda[smp_processor_id()]; + struct rcu_node *rnp = rcu_get_root(rsp); + struct rcu_node *rnp_cur; + struct rcu_node *rnp_end; + + if (!cpu_needs_another_gp(rsp, rdp)) { + spin_unlock_irqrestore(&rnp->lock, flags); + return; + } + + /* Advance to a new grace period and initialize state. */ + rsp->gpnum++; + rsp->signaled = RCU_GP_INIT; /* Hold off force_quiescent_state. */ + rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS; + rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending + + RCU_JIFFIES_TILL_FORCE_QS; + record_gp_stall_check_time(rsp); + dyntick_record_completed(rsp, rsp->completed - 1); + note_new_gpnum(rsp, rdp); + + /* + * Because we are first, we know that all our callbacks will + * be covered by this upcoming grace period, even the ones + * that were registered arbitrarily recently. + */ + rdp->nxttail[RCU_NEXT_READY_TAIL] = rdp->nxttail[RCU_NEXT_TAIL]; + rdp->nxttail[RCU_WAIT_TAIL] = rdp->nxttail[RCU_NEXT_TAIL]; + + /* Special-case the common single-level case. */ + if (NUM_RCU_NODES == 1) { + rnp->qsmask = rnp->qsmaskinit; + spin_unlock_irqrestore(&rnp->lock, flags); + return; + } + + spin_unlock(&rnp->lock); /* leave irqs disabled. */ + + + /* Exclude any concurrent CPU-hotplug operations. */ + spin_lock(&rsp->onofflock); /* irqs already disabled. */ + + /* + * Set the quiescent-state-needed bits in all the non-leaf RCU + * nodes for all currently online CPUs. This operation relies + * on the layout of the hierarchy within the rsp->node[] array. + * Note that other CPUs will access only the leaves of the + * hierarchy, which still indicate that no grace period is in + * progress. In addition, we have excluded CPU-hotplug operations. + * + * We therefore do not need to hold any locks. Any required + * memory barriers will be supplied by the locks guarding the + * leaf rcu_nodes in the hierarchy. + */ + + rnp_end = rsp->level[NUM_RCU_LVLS - 1]; + for (rnp_cur = &rsp->node[0]; rnp_cur < rnp_end; rnp_cur++) + rnp_cur->qsmask = rnp_cur->qsmaskinit; + + /* + * Now set up the leaf nodes. Here we must be careful. First, + * we need to hold the lock in order to exclude other CPUs, which + * might be contending for the leaf nodes' locks. Second, as + * soon as we initialize a given leaf node, its CPUs might run + * up the rest of the hierarchy. We must therefore acquire locks + * for each node that we touch during this stage. (But we still + * are excluding CPU-hotplug operations.) + * + * Note that the grace period cannot complete until we finish + * the initialization process, as there will be at least one + * qsmask bit set in the root node until that time, namely the + * one corresponding to this CPU. + */ + rnp_end = &rsp->node[NUM_RCU_NODES]; + rnp_cur = rsp->level[NUM_RCU_LVLS - 1]; + for (; rnp_cur < rnp_end; rnp_cur++) { + spin_lock(&rnp_cur->lock); /* irqs already disabled. */ + rnp_cur->qsmask = rnp_cur->qsmaskinit; + spin_unlock(&rnp_cur->lock); /* irqs already disabled. */ + } + + rsp->signaled = RCU_SIGNAL_INIT; /* force_quiescent_state now OK. */ + spin_unlock_irqrestore(&rsp->onofflock, flags); +} + +/* + * Advance this CPU's callbacks, but only if the current grace period + * has ended. This may be called only from the CPU to whom the rdp + * belongs. + */ +static void +rcu_process_gp_end(struct rcu_state *rsp, struct rcu_data *rdp) +{ + long completed_snap; + unsigned long flags; + + local_irq_save(flags); + completed_snap = ACCESS_ONCE(rsp->completed); /* outside of lock. */ + + /* Did another grace period end? */ + if (rdp->completed != completed_snap) { + + /* Advance callbacks. No harm if list empty. */ + rdp->nxttail[RCU_DONE_TAIL] = rdp->nxttail[RCU_WAIT_TAIL]; + rdp->nxttail[RCU_WAIT_TAIL] = rdp->nxttail[RCU_NEXT_READY_TAIL]; + rdp->nxttail[RCU_NEXT_READY_TAIL] = rdp->nxttail[RCU_NEXT_TAIL]; + + /* Remember that we saw this grace-period completion. */ + rdp->completed = completed_snap; + } + local_irq_restore(flags); +} + +/* + * Similar to cpu_quiet(), for which it is a helper function. Allows + * a group of CPUs to be quieted at one go, though all the CPUs in the + * group must be represented by the same leaf rcu_node structure. + * That structure's lock must be held upon entry, and it is released + * before return. + */ +static void +cpu_quiet_msk(unsigned long mask, struct rcu_state *rsp, struct rcu_node *rnp, + unsigned long flags) + __releases(rnp->lock) +{ + /* Walk up the rcu_node hierarchy. */ + for (;;) { + if (!(rnp->qsmask & mask)) { + + /* Our bit has already been cleared, so done. */ + spin_unlock_irqrestore(&rnp->lock, flags); + return; + } + rnp->qsmask &= ~mask; + if (rnp->qsmask != 0) { + + /* Other bits still set at this level, so done. */ + spin_unlock_irqrestore(&rnp->lock, flags); + return; + } + mask = rnp->grpmask; + if (rnp->parent == NULL) { + + /* No more levels. Exit loop holding root lock. */ + + break; + } + spin_unlock_irqrestore(&rnp->lock, flags); + rnp = rnp->parent; + spin_lock_irqsave(&rnp->lock, flags); + } + + /* + * Get here if we are the last CPU to pass through a quiescent + * state for this grace period. Clean up and let rcu_start_gp() + * start up the next grace period if one is needed. Note that + * we still hold rnp->lock, as required by rcu_start_gp(), which + * will release it. + */ + rsp->completed = rsp->gpnum; + rcu_process_gp_end(rsp, rsp->rda[smp_processor_id()]); + rcu_start_gp(rsp, flags); /* releases rnp->lock. */ +} + +/* + * Record a quiescent state for the specified CPU, which must either be + * the current CPU or an offline CPU. The lastcomp argument is used to + * make sure we are still in the grace period of interest. We don't want + * to end the current grace period based on quiescent states detected in + * an earlier grace period! + */ +static void +cpu_quiet(int cpu, struct rcu_state *rsp, struct rcu_data *rdp, long lastcomp) +{ + unsigned long flags; + unsigned long mask; + struct rcu_node *rnp; + + rnp = rdp->mynode; + spin_lock_irqsave(&rnp->lock, flags); + if (lastcomp != ACCESS_ONCE(rsp->completed)) { + + /* + * Someone beat us to it for this grace period, so leave. + * The race with GP start is resolved by the fact that we + * hold the leaf rcu_node lock, so that the per-CPU bits + * cannot yet be initialized -- so we would simply find our + * CPU's bit already cleared in cpu_quiet_msk() if this race + * occurred. + */ + rdp->passed_quiesc = 0; /* try again later! */ + spin_unlock_irqrestore(&rnp->lock, flags); + return; + } + mask = rdp->grpmask; + if ((rnp->qsmask & mask) == 0) { + spin_unlock_irqrestore(&rnp->lock, flags); + } else { + rdp->qs_pending = 0; + + /* + * This GP can't end until cpu checks in, so all of our + * callbacks can be processed during the next GP. + */ + rdp = rsp->rda[smp_processor_id()]; + rdp->nxttail[RCU_NEXT_READY_TAIL] = rdp->nxttail[RCU_NEXT_TAIL]; + + cpu_quiet_msk(mask, rsp, rnp, flags); /* releases rnp->lock */ + } +} + +/* + * Check to see if there is a new grace period of which this CPU + * is not yet aware, and if so, set up local rcu_data state for it. + * Otherwise, see if this CPU has just passed through its first + * quiescent state for this grace period, and record that fact if so. + */ +static void +rcu_check_quiescent_state(struct rcu_state *rsp, struct rcu_data *rdp) +{ + /* If there is now a new grace period, record and return. */ + if (check_for_new_grace_period(rsp, rdp)) + return; + + /* + * Does this CPU still need to do its part for current grace period? + * If no, return and let the other CPUs do their part as well. + */ + if (!rdp->qs_pending) + return; + + /* + * Was there a quiescent state since the beginning of the grace + * period? If no, then exit and wait for the next call. + */ + if (!rdp->passed_quiesc) + return; + + /* Tell RCU we are done (but cpu_quiet() will be the judge of that). */ + cpu_quiet(rdp->cpu, rsp, rdp, rdp->passed_quiesc_completed); +} + +#ifdef CONFIG_HOTPLUG_CPU + +/* + * Remove the outgoing CPU from the bitmasks in the rcu_node hierarchy + * and move all callbacks from the outgoing CPU to the current one. + */ +static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp) +{ + int i; + unsigned long flags; + long lastcomp; + unsigned long mask; + struct rcu_data *rdp = rsp->rda[cpu]; + struct rcu_data *rdp_me; + struct rcu_node *rnp; + + /* Exclude any attempts to start a new grace period. */ + spin_lock_irqsave(&rsp->onofflock, flags); + + /* Remove the outgoing CPU from the masks in the rcu_node hierarchy. */ + rnp = rdp->mynode; + mask = rdp->grpmask; /* rnp->grplo is constant. */ + do { + spin_lock(&rnp->lock); /* irqs already disabled. */ + rnp->qsmaskinit &= ~mask; + if (rnp->qsmaskinit != 0) { + spin_unlock(&rnp->lock); /* irqs already disabled. */ + break; + } + mask = rnp->grpmask; + spin_unlock(&rnp->lock); /* irqs already disabled. */ + rnp = rnp->parent; + } while (rnp != NULL); + lastcomp = rsp->completed; + + spin_unlock(&rsp->onofflock); /* irqs remain disabled. */ + + /* Being offline is a quiescent state, so go record it. */ + cpu_quiet(cpu, rsp, rdp, lastcomp); + + /* + * Move callbacks from the outgoing CPU to the running CPU. + * Note that the outgoing CPU is now quiscent, so it is now + * (uncharacteristically) safe to access it rcu_data structure. + * Note also that we must carefully retain the order of the + * outgoing CPU's callbacks in order for rcu_barrier() to work + * correctly. Finally, note that we start all the callbacks + * afresh, even those that have passed through a grace period + * and are therefore ready to invoke. The theory is that hotplug + * events are rare, and that if they are frequent enough to + * indefinitely delay callbacks, you have far worse things to + * be worrying about. + */ + rdp_me = rsp->rda[smp_processor_id()]; + if (rdp->nxtlist != NULL) { + *rdp_me->nxttail[RCU_NEXT_TAIL] = rdp->nxtlist; + rdp_me->nxttail[RCU_NEXT_TAIL] = rdp->nxttail[RCU_NEXT_TAIL]; + rdp->nxtlist = NULL; + for (i = 0; i < RCU_NEXT_SIZE; i++) + rdp->nxttail[i] = &rdp->nxtlist; + rdp_me->qlen += rdp->qlen; + rdp->qlen = 0; + } + local_irq_restore(flags); +} + +/* + * Remove the specified CPU from the RCU hierarchy and move any pending + * callbacks that it might have to the current CPU. This code assumes + * that at least one CPU in the system will remain running at all times. + * Any attempt to offline -all- CPUs is likely to strand RCU callbacks. + */ +static void rcu_offline_cpu(int cpu) +{ + __rcu_offline_cpu(cpu, &rcu_state); + __rcu_offline_cpu(cpu, &rcu_bh_state); +} + +#else /* #ifdef CONFIG_HOTPLUG_CPU */ + +static void rcu_offline_cpu(int cpu) +{ +} + +#endif /* #else #ifdef CONFIG_HOTPLUG_CPU */ + +/* + * Invoke any RCU callbacks that have made it to the end of their grace + * period. Thottle as specified by rdp->blimit. + */ +static void rcu_do_batch(struct rcu_data *rdp) +{ + unsigned long flags; + struct rcu_head *next, *list, **tail; + int count; + + /* If no callbacks are ready, just return.*/ + if (!cpu_has_callbacks_ready_to_invoke(rdp)) + return; + + /* + * Extract the list of ready callbacks, disabling to prevent + * races with call_rcu() from interrupt handlers. + */ + local_irq_save(flags); + list = rdp->nxtlist; + rdp->nxtlist = *rdp->nxttail[RCU_DONE_TAIL]; + *rdp->nxttail[RCU_DONE_TAIL] = NULL; + tail = rdp->nxttail[RCU_DONE_TAIL]; + for (count = RCU_NEXT_SIZE - 1; count >= 0; count--) + if (rdp->nxttail[count] == rdp->nxttail[RCU_DONE_TAIL]) + rdp->nxttail[count] = &rdp->nxtlist; + local_irq_restore(flags); + + /* Invoke callbacks. */ + count = 0; + while (list) { + next = list->next; + prefetch(next); + list->func(list); + list = next; + if (++count >= rdp->blimit) + break; + } + + local_irq_save(flags); + + /* Update count, and requeue any remaining callbacks. */ + rdp->qlen -= count; + if (list != NULL) { + *tail = rdp->nxtlist; + rdp->nxtlist = list; + for (count = 0; count < RCU_NEXT_SIZE; count++) + if (&rdp->nxtlist == rdp->nxttail[count]) + rdp->nxttail[count] = tail; + else + break; + } + + /* Reinstate batch limit if we have worked down the excess. */ + if (rdp->blimit == LONG_MAX && rdp->qlen <= qlowmark) + rdp->blimit = blimit; + + local_irq_restore(flags); + + /* Re-raise the RCU softirq if there are callbacks remaining. */ + if (cpu_has_callbacks_ready_to_invoke(rdp)) + raise_softirq(RCU_SOFTIRQ); +} + +/* + * Check to see if this CPU is in a non-context-switch quiescent state + * (user mode or idle loop for rcu, non-softirq execution for rcu_bh). + * Also schedule the RCU softirq handler. + * + * This function must be called with hardirqs disabled. It is normally + * invoked from the scheduling-clock interrupt. If rcu_pending returns + * false, there is no point in invoking rcu_check_callbacks(). + */ +void rcu_check_callbacks(int cpu, int user) +{ + if (user || + (idle_cpu(cpu) && !in_softirq() && + hardirq_count() <= (1 << HARDIRQ_SHIFT))) { + + /* + * Get here if this CPU took its interrupt from user + * mode or from the idle loop, and if this is not a + * nested interrupt. In this case, the CPU is in + * a quiescent state, so count it. + * + * No memory barrier is required here because both + * rcu_qsctr_inc() and rcu_bh_qsctr_inc() reference + * only CPU-local variables that other CPUs neither + * access nor modify, at least not while the corresponding + * CPU is online. + */ + + rcu_qsctr_inc(cpu); + rcu_bh_qsctr_inc(cpu); + + } else if (!in_softirq()) { + + /* + * Get here if this CPU did not take its interrupt from + * softirq, in other words, if it is not interrupting + * a rcu_bh read-side critical section. This is an _bh + * critical section, so count it. + */ + + rcu_bh_qsctr_inc(cpu); + } + raise_softirq(RCU_SOFTIRQ); +} + +#ifdef CONFIG_SMP + +/* + * Scan the leaf rcu_node structures, processing dyntick state for any that + * have not yet encountered a quiescent state, using the function specified. + * Returns 1 if the current grace period ends while scanning (possibly + * because we made it end). + */ +static int rcu_process_dyntick(struct rcu_state *rsp, long lastcomp, + int (*f)(struct rcu_data *)) +{ + unsigned long bit; + int cpu; + unsigned long flags; + unsigned long mask; + struct rcu_node *rnp_cur = rsp->level[NUM_RCU_LVLS - 1]; + struct rcu_node *rnp_end = &rsp->node[NUM_RCU_NODES]; + + for (; rnp_cur < rnp_end; rnp_cur++) { + mask = 0; + spin_lock_irqsave(&rnp_cur->lock, flags); + if (rsp->completed != lastcomp) { + spin_unlock_irqrestore(&rnp_cur->lock, flags); + return 1; + } + if (rnp_cur->qsmask == 0) { + spin_unlock_irqrestore(&rnp_cur->lock, flags); + continue; + } + cpu = rnp_cur->grplo; + bit = 1; + for (; cpu <= rnp_cur->grphi; cpu++, bit <<= 1) { + if ((rnp_cur->qsmask & bit) != 0 && f(rsp->rda[cpu])) + mask |= bit; + } + if (mask != 0 && rsp->completed == lastcomp) { + + /* cpu_quiet_msk() releases rnp_cur->lock. */ + cpu_quiet_msk(mask, rsp, rnp_cur, flags); + continue; + } + spin_unlock_irqrestore(&rnp_cur->lock, flags); + } + return 0; +} + +/* + * Force quiescent states on reluctant CPUs, and also detect which + * CPUs are in dyntick-idle mode. + */ +static void force_quiescent_state(struct rcu_state *rsp, int relaxed) +{ + unsigned long flags; + long lastcomp; + struct rcu_data *rdp = rsp->rda[smp_processor_id()]; + struct rcu_node *rnp = rcu_get_root(rsp); + u8 signaled; + + if (ACCESS_ONCE(rsp->completed) == ACCESS_ONCE(rsp->gpnum)) + return; /* No grace period in progress, nothing to force. */ + if (!spin_trylock_irqsave(&rsp->fqslock, flags)) { + rsp->n_force_qs_lh++; /* Inexact, can lose counts. Tough! */ + return; /* Someone else is already on the job. */ + } + if (relaxed && + (long)(rsp->jiffies_force_qs - jiffies) >= 0 && + (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) >= 0) + goto unlock_ret; /* no emergency and done recently. */ + rsp->n_force_qs++; + spin_lock(&rnp->lock); + lastcomp = rsp->completed; + signaled = rsp->signaled; + rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS; + rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending + + RCU_JIFFIES_TILL_FORCE_QS; + if (lastcomp == rsp->gpnum) { + rsp->n_force_qs_ngp++; + spin_unlock(&rnp->lock); + goto unlock_ret; /* no GP in progress, time updated. */ + } + spin_unlock(&rnp->lock); + switch (signaled) { + case RCU_GP_INIT: + + break; /* grace period still initializing, ignore. */ + + case RCU_SAVE_DYNTICK: + + if (RCU_SIGNAL_INIT != RCU_SAVE_DYNTICK) + break; /* So gcc recognizes the dead code. */ + + /* Record dyntick-idle state. */ + if (rcu_process_dyntick(rsp, lastcomp, + dyntick_save_progress_counter)) + goto unlock_ret; + + /* Update state, record completion counter. */ + spin_lock(&rnp->lock); + if (lastcomp == rsp->completed) { + rsp->signaled = RCU_FORCE_QS; + dyntick_record_completed(rsp, lastcomp); + } + spin_unlock(&rnp->lock); + break; + + case RCU_FORCE_QS: + + /* Check dyntick-idle state, send IPI to laggarts. */ + if (rcu_process_dyntick(rsp, dyntick_recall_completed(rsp), + rcu_implicit_dynticks_qs)) + goto unlock_ret; + + /* Leave state in case more forcing is required. */ + + break; + } +unlock_ret: + spin_unlock_irqrestore(&rsp->fqslock, flags); +} + +#else /* #ifdef CONFIG_SMP */ + +static void force_quiescent_state(struct rcu_state *rsp, int relaxed) +{ + set_need_resched(); +} + +#endif /* #else #ifdef CONFIG_SMP */ + +/* + * This does the RCU processing work from softirq context for the + * specified rcu_state and rcu_data structures. This may be called + * only from the CPU to whom the rdp belongs. + */ +static void +__rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) +{ + unsigned long flags; + + /* + * If an RCU GP has gone long enough, go check for dyntick + * idle CPUs and, if needed, send resched IPIs. + */ + if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 || + (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0) + force_quiescent_state(rsp, 1); + + /* + * Advance callbacks in response to end of earlier grace + * period that some other CPU ended. + */ + rcu_process_gp_end(rsp, rdp); + + /* Update RCU state based on any recent quiescent states. */ + rcu_check_quiescent_state(rsp, rdp); + + /* Does this CPU require a not-yet-started grace period? */ + if (cpu_needs_another_gp(rsp, rdp)) { + spin_lock_irqsave(&rcu_get_root(rsp)->lock, flags); + rcu_start_gp(rsp, flags); /* releases above lock */ + } + + /* If there are callbacks ready, invoke them. */ + rcu_do_batch(rdp); +} + +/* + * Do softirq processing for the current CPU. + */ +static void rcu_process_callbacks(struct softirq_action *unused) +{ + /* + * Memory references from any prior RCU read-side critical sections + * executed by the interrupted code must be seen before any RCU + * grace-period manipulations below. + */ + smp_mb(); /* See above block comment. */ + + __rcu_process_callbacks(&rcu_state, &__get_cpu_var(rcu_data)); + __rcu_process_callbacks(&rcu_bh_state, &__get_cpu_var(rcu_bh_data)); + + /* + * Memory references from any later RCU read-side critical sections + * executed by the interrupted code must be seen after any RCU + * grace-period manipulations above. + */ + smp_mb(); /* See above block comment. */ +} + +static void +__call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), + struct rcu_state *rsp) +{ + unsigned long flags; + struct rcu_data *rdp; + + head->func = func; + head->next = NULL; + + smp_mb(); /* Ensure RCU update seen before callback registry. */ + + /* + * Opportunistically note grace-period endings and beginnings. + * Note that we might see a beginning right after we see an + * end, but never vice versa, since this CPU has to pass through + * a quiescent state betweentimes. + */ + local_irq_save(flags); + rdp = rsp->rda[smp_processor_id()]; + rcu_process_gp_end(rsp, rdp); + check_for_new_grace_period(rsp, rdp); + + /* Add the callback to our list. */ + *rdp->nxttail[RCU_NEXT_TAIL] = head; + rdp->nxttail[RCU_NEXT_TAIL] = &head->next; + + /* Start a new grace period if one not already started. */ + if (ACCESS_ONCE(rsp->completed) == ACCESS_ONCE(rsp->gpnum)) { + unsigned long nestflag; + struct rcu_node *rnp_root = rcu_get_root(rsp); + + spin_lock_irqsave(&rnp_root->lock, nestflag); + rcu_start_gp(rsp, nestflag); /* releases rnp_root->lock. */ + } + + /* Force the grace period if too many callbacks or too long waiting. */ + if (unlikely(++rdp->qlen > qhimark)) { + rdp->blimit = LONG_MAX; + force_quiescent_state(rsp, 0); + } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 || + (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0) + force_quiescent_state(rsp, 1); + local_irq_restore(flags); +} + +/* + * Queue an RCU callback for invocation after a grace period. + */ +void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) +{ + __call_rcu(head, func, &rcu_state); +} +EXPORT_SYMBOL_GPL(call_rcu); + +/* + * Queue an RCU for invocation after a quicker grace period. + */ +void call_rcu_bh(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) +{ + __call_rcu(head, func, &rcu_bh_state); +} +EXPORT_SYMBOL_GPL(call_rcu_bh); + +/* + * Check to see if there is any immediate RCU-related work to be done + * by the current CPU, for the specified type of RCU, returning 1 if so. + * The checks are in order of increasing expense: checks that can be + * carried out against CPU-local state are performed first. However, + * we must check for CPU stalls first, else we might not get a chance. + */ +static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp) +{ + rdp->n_rcu_pending++; + + /* Check for CPU stalls, if enabled. */ + check_cpu_stall(rsp, rdp); + + /* Is the RCU core waiting for a quiescent state from this CPU? */ + if (rdp->qs_pending) + return 1; + + /* Does this CPU have callbacks ready to invoke? */ + if (cpu_has_callbacks_ready_to_invoke(rdp)) + return 1; + + /* Has RCU gone idle with this CPU needing another grace period? */ + if (cpu_needs_another_gp(rsp, rdp)) + return 1; + + /* Has another RCU grace period completed? */ + if (ACCESS_ONCE(rsp->completed) != rdp->completed) /* outside of lock */ + return 1; + + /* Has a new RCU grace period started? */ + if (ACCESS_ONCE(rsp->gpnum) != rdp->gpnum) /* outside of lock */ + return 1; + + /* Has an RCU GP gone long enough to send resched IPIs &c? */ + if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) && + ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 || + (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)) + return 1; + + /* nothing to do */ + return 0; +} + +/* + * Check to see if there is any immediate RCU-related work to be done + * by the current CPU, returning 1 if so. This function is part of the + * RCU implementation; it is -not- an exported member of the RCU API. + */ +int rcu_pending(int cpu) +{ + return __rcu_pending(&rcu_state, &per_cpu(rcu_data, cpu)) || + __rcu_pending(&rcu_bh_state, &per_cpu(rcu_bh_data, cpu)); +} + +/* + * Check to see if any future RCU-related work will need to be done + * by the current CPU, even if none need be done immediately, returning + * 1 if so. This function is part of the RCU implementation; it is -not- + * an exported member of the RCU API. + */ +int rcu_needs_cpu(int cpu) +{ + /* RCU callbacks either ready or pending? */ + return per_cpu(rcu_data, cpu).nxtlist || + per_cpu(rcu_bh_data, cpu).nxtlist; +} + +/* + * Initialize a CPU's per-CPU RCU data. We take this "scorched earth" + * approach so that we don't have to worry about how long the CPU has + * been gone, or whether it ever was online previously. We do trust the + * ->mynode field, as it is constant for a given struct rcu_data and + * initialized during early boot. + * + * Note that only one online or offline event can be happening at a given + * time. Note also that we can accept some slop in the rsp->completed + * access due to the fact that this CPU cannot possibly have any RCU + * callbacks in flight yet. + */ +static void +rcu_init_percpu_data(int cpu, struct rcu_state *rsp) +{ + unsigned long flags; + int i; + long lastcomp; + unsigned long mask; + struct rcu_data *rdp = rsp->rda[cpu]; + struct rcu_node *rnp = rcu_get_root(rsp); + + /* Set up local state, ensuring consistent view of global state. */ + spin_lock_irqsave(&rnp->lock, flags); + lastcomp = rsp->completed; + rdp->completed = lastcomp; + rdp->gpnum = lastcomp; + rdp->passed_quiesc = 0; /* We could be racing with new GP, */ + rdp->qs_pending = 1; /* so set up to respond to current GP. */ + rdp->beenonline = 1; /* We have now been online. */ + rdp->passed_quiesc_completed = lastcomp - 1; + rdp->grpmask = 1UL << (cpu - rdp->mynode->grplo); + rdp->nxtlist = NULL; + for (i = 0; i < RCU_NEXT_SIZE; i++) + rdp->nxttail[i] = &rdp->nxtlist; + rdp->qlen = 0; + rdp->blimit = blimit; +#ifdef CONFIG_NO_HZ + rdp->dynticks = &per_cpu(rcu_dynticks, cpu); +#endif /* #ifdef CONFIG_NO_HZ */ + rdp->cpu = cpu; + spin_unlock(&rnp->lock); /* irqs remain disabled. */ + + /* + * A new grace period might start here. If so, we won't be part + * of it, but that is OK, as we are currently in a quiescent state. + */ + + /* Exclude any attempts to start a new GP on large systems. */ + spin_lock(&rsp->onofflock); /* irqs already disabled. */ + + /* Add CPU to rcu_node bitmasks. */ + rnp = rdp->mynode; + mask = rdp->grpmask; + do { + /* Exclude any attempts to start a new GP on small systems. */ + spin_lock(&rnp->lock); /* irqs already disabled. */ + rnp->qsmaskinit |= mask; + mask = rnp->grpmask; + spin_unlock(&rnp->lock); /* irqs already disabled. */ + rnp = rnp->parent; + } while (rnp != NULL && !(rnp->qsmaskinit & mask)); + + spin_unlock(&rsp->onofflock); /* irqs remain disabled. */ + + /* + * A new grace period might start here. If so, we will be part of + * it, and its gpnum will be greater than ours, so we will + * participate. It is also possible for the gpnum to have been + * incremented before this function was called, and the bitmasks + * to not be filled out until now, in which case we will also + * participate due to our gpnum being behind. + */ + + /* Since it is coming online, the CPU is in a quiescent state. */ + cpu_quiet(cpu, rsp, rdp, lastcomp); + local_irq_restore(flags); +} + +static void __cpuinit rcu_online_cpu(int cpu) +{ +#ifdef CONFIG_NO_HZ + struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); + + rdtp->dynticks_nesting = 1; + rdtp->dynticks |= 1; /* need consecutive #s even for hotplug. */ + rdtp->dynticks_nmi = (rdtp->dynticks_nmi + 1) & ~0x1; +#endif /* #ifdef CONFIG_NO_HZ */ + rcu_init_percpu_data(cpu, &rcu_state); + rcu_init_percpu_data(cpu, &rcu_bh_state); + open_softirq(RCU_SOFTIRQ, rcu_process_callbacks); +} + +/* + * Handle CPU online/offline notifcation events. + */ +static int __cpuinit rcu_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + long cpu = (long)hcpu; + + switch (action) { + case CPU_UP_PREPARE: + case CPU_UP_PREPARE_FROZEN: + rcu_online_cpu(cpu); + break; + case CPU_DEAD: + case CPU_DEAD_FROZEN: + case CPU_UP_CANCELED: + case CPU_UP_CANCELED_FROZEN: + rcu_offline_cpu(cpu); + break; + default: + break; + } + return NOTIFY_OK; +} + +/* + * Compute the per-level fanout, either using the exact fanout specified + * or balancing the tree, depending on CONFIG_RCU_FANOUT_EXACT. + */ +#ifdef CONFIG_RCU_FANOUT_EXACT +static void __init rcu_init_levelspread(struct rcu_state *rsp) +{ + int i; + + for (i = NUM_RCU_LVLS - 1; i >= 0; i--) + rsp->levelspread[i] = CONFIG_RCU_FANOUT; +} +#else /* #ifdef CONFIG_RCU_FANOUT_EXACT */ +static void __init rcu_init_levelspread(struct rcu_state *rsp) +{ + int ccur; + int cprv; + int i; + + cprv = NR_CPUS; + for (i = NUM_RCU_LVLS - 1; i >= 0; i--) { + ccur = rsp->levelcnt[i]; + rsp->levelspread[i] = (cprv + ccur - 1) / ccur; + cprv = ccur; + } +} +#endif /* #else #ifdef CONFIG_RCU_FANOUT_EXACT */ + +/* + * Helper function for rcu_init() that initializes one rcu_state structure. + */ +static void __init rcu_init_one(struct rcu_state *rsp) +{ + int cpustride = 1; + int i; + int j; + struct rcu_node *rnp; + + /* Initialize the level-tracking arrays. */ + + for (i = 1; i < NUM_RCU_LVLS; i++) + rsp->level[i] = rsp->level[i - 1] + rsp->levelcnt[i - 1]; + rcu_init_levelspread(rsp); + + /* Initialize the elements themselves, starting from the leaves. */ + + for (i = NUM_RCU_LVLS - 1; i >= 0; i--) { + cpustride *= rsp->levelspread[i]; + rnp = rsp->level[i]; + for (j = 0; j < rsp->levelcnt[i]; j++, rnp++) { + spin_lock_init(&rnp->lock); + rnp->qsmask = 0; + rnp->qsmaskinit = 0; + rnp->grplo = j * cpustride; + rnp->grphi = (j + 1) * cpustride - 1; + if (rnp->grphi >= NR_CPUS) + rnp->grphi = NR_CPUS - 1; + if (i == 0) { + rnp->grpnum = 0; + rnp->grpmask = 0; + rnp->parent = NULL; + } else { + rnp->grpnum = j % rsp->levelspread[i - 1]; + rnp->grpmask = 1UL << rnp->grpnum; + rnp->parent = rsp->level[i - 1] + + j / rsp->levelspread[i - 1]; + } + rnp->level = i; + } + } +} + +/* + * Helper macro for __rcu_init(). To be used nowhere else! + * Assigns leaf node pointers into each CPU's rcu_data structure. + */ +#define RCU_DATA_PTR_INIT(rsp, rcu_data) \ +do { \ + rnp = (rsp)->level[NUM_RCU_LVLS - 1]; \ + j = 0; \ + for_each_possible_cpu(i) { \ + if (i > rnp[j].grphi) \ + j++; \ + per_cpu(rcu_data, i).mynode = &rnp[j]; \ + (rsp)->rda[i] = &per_cpu(rcu_data, i); \ + } \ +} while (0) + +static struct notifier_block __cpuinitdata rcu_nb = { + .notifier_call = rcu_cpu_notify, +}; + +void __init __rcu_init(void) +{ + int i; /* All used by RCU_DATA_PTR_INIT(). */ + int j; + struct rcu_node *rnp; + + printk(KERN_WARNING "Experimental hierarchical RCU implementation.\n"); +#ifdef CONFIG_RCU_CPU_STALL_DETECTOR + printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n"); +#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */ + rcu_init_one(&rcu_state); + RCU_DATA_PTR_INIT(&rcu_state, rcu_data); + rcu_init_one(&rcu_bh_state); + RCU_DATA_PTR_INIT(&rcu_bh_state, rcu_bh_data); + + for_each_online_cpu(i) + rcu_cpu_notify(&rcu_nb, CPU_UP_PREPARE, (void *)(long)i); + /* Register notifier for non-boot CPUs */ + register_cpu_notifier(&rcu_nb); + printk(KERN_WARNING "Experimental hierarchical RCU init done.\n"); +} + +module_param(blimit, int, 0); +module_param(qhimark, int, 0); +module_param(qlowmark, int, 0); diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c new file mode 100644 index 000000000000..d6db3e837826 --- /dev/null +++ b/kernel/rcutree_trace.c @@ -0,0 +1,271 @@ +/* + * Read-Copy Update tracing for classic implementation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright IBM Corporation, 2008 + * + * Papers: http://www.rdrop.com/users/paulmck/RCU + * + * For detailed explanation of Read-Copy Update mechanism see - + * Documentation/RCU + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp) +{ + if (!rdp->beenonline) + return; + seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d rpfq=%ld rp=%x", + rdp->cpu, + cpu_is_offline(rdp->cpu) ? '!' : ' ', + rdp->completed, rdp->gpnum, + rdp->passed_quiesc, rdp->passed_quiesc_completed, + rdp->qs_pending, + rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending, + (int)(rdp->n_rcu_pending & 0xffff)); +#ifdef CONFIG_NO_HZ + seq_printf(m, " dt=%d/%d dn=%d df=%lu", + rdp->dynticks->dynticks, + rdp->dynticks->dynticks_nesting, + rdp->dynticks->dynticks_nmi, + rdp->dynticks_fqs); +#endif /* #ifdef CONFIG_NO_HZ */ + seq_printf(m, " of=%lu ri=%lu", rdp->offline_fqs, rdp->resched_ipi); + seq_printf(m, " ql=%ld b=%ld\n", rdp->qlen, rdp->blimit); +} + +#define PRINT_RCU_DATA(name, func, m) \ + do { \ + int _p_r_d_i; \ + \ + for_each_possible_cpu(_p_r_d_i) \ + func(m, &per_cpu(name, _p_r_d_i)); \ + } while (0) + +static int show_rcudata(struct seq_file *m, void *unused) +{ + seq_puts(m, "rcu:\n"); + PRINT_RCU_DATA(rcu_data, print_one_rcu_data, m); + seq_puts(m, "rcu_bh:\n"); + PRINT_RCU_DATA(rcu_bh_data, print_one_rcu_data, m); + return 0; +} + +static int rcudata_open(struct inode *inode, struct file *file) +{ + return single_open(file, show_rcudata, NULL); +} + +static struct file_operations rcudata_fops = { + .owner = THIS_MODULE, + .open = rcudata_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp) +{ + if (!rdp->beenonline) + return; + seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d,%ld,%ld", + rdp->cpu, + cpu_is_offline(rdp->cpu) ? "\"Y\"" : "\"N\"", + rdp->completed, rdp->gpnum, + rdp->passed_quiesc, rdp->passed_quiesc_completed, + rdp->qs_pending, + rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending, + rdp->n_rcu_pending); +#ifdef CONFIG_NO_HZ + seq_printf(m, ",%d,%d,%d,%lu", + rdp->dynticks->dynticks, + rdp->dynticks->dynticks_nesting, + rdp->dynticks->dynticks_nmi, + rdp->dynticks_fqs); +#endif /* #ifdef CONFIG_NO_HZ */ + seq_printf(m, ",%lu,%lu", rdp->offline_fqs, rdp->resched_ipi); + seq_printf(m, ",%ld,%ld\n", rdp->qlen, rdp->blimit); +} + +static int show_rcudata_csv(struct seq_file *m, void *unused) +{ + seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",\"rpfq\",\"rp\","); +#ifdef CONFIG_NO_HZ + seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\","); +#endif /* #ifdef CONFIG_NO_HZ */ + seq_puts(m, "\"of\",\"ri\",\"ql\",\"b\"\n"); + seq_puts(m, "\"rcu:\"\n"); + PRINT_RCU_DATA(rcu_data, print_one_rcu_data_csv, m); + seq_puts(m, "\"rcu_bh:\"\n"); + PRINT_RCU_DATA(rcu_bh_data, print_one_rcu_data_csv, m); + return 0; +} + +static int rcudata_csv_open(struct inode *inode, struct file *file) +{ + return single_open(file, show_rcudata_csv, NULL); +} + +static struct file_operations rcudata_csv_fops = { + .owner = THIS_MODULE, + .open = rcudata_csv_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void print_one_rcu_state(struct seq_file *m, struct rcu_state *rsp) +{ + int level = 0; + struct rcu_node *rnp; + + seq_printf(m, "c=%ld g=%ld s=%d jfq=%ld j=%x " + "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu\n", + rsp->completed, rsp->gpnum, rsp->signaled, + (long)(rsp->jiffies_force_qs - jiffies), + (int)(jiffies & 0xffff), + rsp->n_force_qs, rsp->n_force_qs_ngp, + rsp->n_force_qs - rsp->n_force_qs_ngp, + rsp->n_force_qs_lh); + for (rnp = &rsp->node[0]; rnp - &rsp->node[0] < NUM_RCU_NODES; rnp++) { + if (rnp->level != level) { + seq_puts(m, "\n"); + level = rnp->level; + } + seq_printf(m, "%lx/%lx %d:%d ^%d ", + rnp->qsmask, rnp->qsmaskinit, + rnp->grplo, rnp->grphi, rnp->grpnum); + } + seq_puts(m, "\n"); +} + +static int show_rcuhier(struct seq_file *m, void *unused) +{ + seq_puts(m, "rcu:\n"); + print_one_rcu_state(m, &rcu_state); + seq_puts(m, "rcu_bh:\n"); + print_one_rcu_state(m, &rcu_bh_state); + return 0; +} + +static int rcuhier_open(struct inode *inode, struct file *file) +{ + return single_open(file, show_rcuhier, NULL); +} + +static struct file_operations rcuhier_fops = { + .owner = THIS_MODULE, + .open = rcuhier_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int show_rcugp(struct seq_file *m, void *unused) +{ + seq_printf(m, "rcu: completed=%ld gpnum=%ld\n", + rcu_state.completed, rcu_state.gpnum); + seq_printf(m, "rcu_bh: completed=%ld gpnum=%ld\n", + rcu_bh_state.completed, rcu_bh_state.gpnum); + return 0; +} + +static int rcugp_open(struct inode *inode, struct file *file) +{ + return single_open(file, show_rcugp, NULL); +} + +static struct file_operations rcugp_fops = { + .owner = THIS_MODULE, + .open = rcugp_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *rcudir, *datadir, *datadir_csv, *hierdir, *gpdir; +static int __init rcuclassic_trace_init(void) +{ + rcudir = debugfs_create_dir("rcu", NULL); + if (!rcudir) + goto out; + + datadir = debugfs_create_file("rcudata", 0444, rcudir, + NULL, &rcudata_fops); + if (!datadir) + goto free_out; + + datadir_csv = debugfs_create_file("rcudata.csv", 0444, rcudir, + NULL, &rcudata_csv_fops); + if (!datadir_csv) + goto free_out; + + gpdir = debugfs_create_file("rcugp", 0444, rcudir, NULL, &rcugp_fops); + if (!gpdir) + goto free_out; + + hierdir = debugfs_create_file("rcuhier", 0444, rcudir, + NULL, &rcuhier_fops); + if (!hierdir) + goto free_out; + return 0; +free_out: + if (datadir) + debugfs_remove(datadir); + if (datadir_csv) + debugfs_remove(datadir_csv); + if (gpdir) + debugfs_remove(gpdir); + debugfs_remove(rcudir); +out: + return 1; +} + +static void __exit rcuclassic_trace_cleanup(void) +{ + debugfs_remove(datadir); + debugfs_remove(datadir_csv); + debugfs_remove(gpdir); + debugfs_remove(hierdir); + debugfs_remove(rcudir); +} + + +module_init(rcuclassic_trace_init); +module_exit(rcuclassic_trace_cleanup); + +MODULE_AUTHOR("Paul E. McKenney"); +MODULE_DESCRIPTION("Read-Copy Update tracing for hierarchical implementation"); +MODULE_LICENSE("GPL"); diff --git a/kernel/softirq.c b/kernel/softirq.c index e7c69a720d69..80d323e6f61a 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -269,6 +269,7 @@ void irq_enter(void) { int cpu = smp_processor_id(); + rcu_irq_enter(); if (idle_cpu(cpu) && !in_interrupt()) { __irq_enter(); tick_check_idle(cpu); @@ -295,9 +296,9 @@ void irq_exit(void) #ifdef CONFIG_NO_HZ /* Make sure that timer wheel updates are propagated */ - if (!in_interrupt() && idle_cpu(smp_processor_id()) && !need_resched()) - tick_nohz_stop_sched_tick(0); rcu_irq_exit(); + if (idle_cpu(smp_processor_id()) && !in_interrupt() && !need_resched()) + tick_nohz_stop_sched_tick(0); #endif preempt_enable_no_resched(); } diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index b0f239e443bc..465d822f3f5d 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -619,6 +619,19 @@ config RCU_CPU_STALL_DETECTOR Say N if you are unsure. +config RCU_CPU_STALL_DETECTOR + bool "Check for stalled CPUs delaying RCU grace periods" + depends on CLASSIC_RCU || TREE_RCU + default n + help + This option causes RCU to printk information on which + CPUs are delaying the current grace period, but only when + the grace period extends for excessive time periods. + + Say Y if you want RCU to perform such checks. + + Say N if you are unsure. + config KPROBES_SANITY_TEST bool "Kprobes sanity tests" depends on DEBUG_KERNEL -- cgit v1.2.3 From a2ced6e173e0c93870f79856e97825f4e180891e Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Thu, 18 Dec 2008 11:41:33 -0800 Subject: x86: PAT: update documentation to cover pgprot and remap_pfn related changes - v3 Impact: Documentation only. Add documentation related to pgprot_* change. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin --- Documentation/x86/pat.txt | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'Documentation') diff --git a/Documentation/x86/pat.txt b/Documentation/x86/pat.txt index c93ff5f4c0dd..1784ff276997 100644 --- a/Documentation/x86/pat.txt +++ b/Documentation/x86/pat.txt @@ -80,6 +80,30 @@ pci proc | -- | -- | WC | | | | | ------------------------------------------------------------------- +Advanced APIs for drivers +------------------------- +A. Exporting pages to user with remap_pfn_range, io_remap_pfn_range, +vm_insert_pfn + +Drivers wanting to export some pages to userspace, do it by using mmap +interface and a combination of +1) pgprot_noncached() +2) io_remap_pfn_range() or remap_pfn_range() or vm_insert_pfn() + +With pat support, a new API pgprot_writecombine is being added. So, driver can +continue to use the above sequence, with either pgprot_noncached() or +pgprot_writecombine() in step 1, followed by step 2. + +In addition, step 2 internally tracks the region as UC or WC in memtype +list in order to ensure no conflicting mapping. + +Note that this set of APIs only work with IO (non RAM) regions. If driver +wants to export RAM region, it has to do set_memory_uc() or set_memory_wc() +as step 0 above and also track the usage of those pages and use set_memory_wb() +before the page is freed to free pool. + + + Notes: -- in the above table mean "Not suggested usage for the API". Some of the --'s -- cgit v1.2.3 From 9e43f0de690211cf7153b5f3ec251bc315647ada Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 17 Dec 2008 14:51:01 +0100 Subject: ALSA: hda - Add no-jd model for IDT 92HD73xx Added the model without the jack-detection for some desktops that have really no jack-detection. The recent driver caused regressions regarding the sound output on such machines. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_sigmatel.c | 5 +++++ 2 files changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index a57cd5438b75..394d7d378dc7 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1077,6 +1077,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. STAC92HD73* ref Reference board + no-jd BIOS setup but without jack-detection dell-m6-amic Dell desktops/laptops with analog mics dell-m6-dmic Dell desktops/laptops with digital mics dell-m6 Dell desktops/laptops with both type of mics diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 5fcaae676e2a..d7c622f944f6 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -69,6 +69,7 @@ enum { }; enum { + STAC_92HD73XX_NO_JD, /* no jack-detection */ STAC_92HD73XX_REF, STAC_DELL_M6_AMIC, STAC_DELL_M6_DMIC, @@ -1612,6 +1613,7 @@ static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = { }; static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = { + [STAC_92HD73XX_NO_JD] = "no-jd", [STAC_92HD73XX_REF] = "ref", [STAC_DELL_M6_AMIC] = "dell-m6-amic", [STAC_DELL_M6_DMIC] = "dell-m6-dmic", @@ -4359,6 +4361,9 @@ again: return err; } + if (spec->board_config == STAC_92HD73XX_NO_JD) + spec->hp_detect = 0; + codec->patch_ops = stac92xx_patch_ops; return 0; -- cgit v1.2.3 From cae51176c1082ecb59706056910f8a217d433981 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 19 Dec 2008 08:36:53 +0100 Subject: ALSA: split HD-audio model list to HD-Audio-Models.txt Split the list of model option values to a separate file, HD-Audio-Models.txt, from ALSA-Configuration.txt. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 323 +--------------------- Documentation/sound/alsa/HD-Audio-Models.txt | 348 ++++++++++++++++++++++++ 2 files changed, 353 insertions(+), 318 deletions(-) create mode 100644 Documentation/sound/alsa/HD-Audio-Models.txt (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index d5b6b1171035..a4f3a22caba3 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -772,328 +772,15 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This module supports multiple cards and autoprobe. + See Documentation/sound/alsa/HD-Audio.txt for more details about + HD-audio driver. + Each codec may have a model table for different configurations. If your machine isn't listed there, the default (usually minimal) configuration is set up. You can pass "model=" option to specify a certain model in such a case. There are different - models depending on the codec chip. - - See Documentation/sound/alsa/HD-Audio.txt for some details. - - Model name Description - ---------- ----------- - ALC880 - 3stack 3-jack in back and a headphone out - 3stack-digout 3-jack in back, a HP out and a SPDIF out - 5stack 5-jack in back, 2-jack in front - 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out - 6stack 6-jack in back, 2-jack in front - 6stack-digout 6-jack with a SPDIF out - w810 3-jack - z71v 3-jack (HP shared SPDIF) - asus 3-jack (ASUS Mobo) - asus-w1v ASUS W1V - asus-dig ASUS with SPDIF out - asus-dig2 ASUS with SPDIF out (using GPIO2) - uniwill 3-jack - fujitsu Fujitsu Laptops (Pi1536) - F1734 2-jack - lg LG laptop (m1 express dual) - lg-lw LG LW20/LW25 laptop - tcl TCL S700 - clevo Clevo laptops (m520G, m665n) - medion Medion Rim 2150 - test for testing/debugging purpose, almost all controls can be - adjusted. Appearing only when compiled with - $CONFIG_SND_DEBUG=y - auto auto-config reading BIOS (default) - - ALC260 - hp HP machines - hp-3013 HP machines (3013-variant) - hp-dc7600 HP DC7600 - fujitsu Fujitsu S7020 - acer Acer TravelMate - will Will laptops (PB V7900) - replacer Replacer 672V - basic fixed pin assignment (old default model) - test for testing/debugging purpose, almost all controls can - adjusted. Appearing only when compiled with - $CONFIG_SND_DEBUG=y - auto auto-config reading BIOS (default) - - ALC262 - fujitsu Fujitsu Laptop - hp-bpc HP xw4400/6400/8400/9400 laptops - hp-bpc-d7000 HP BPC D7000 - hp-tc-t5735 HP Thin Client T5735 - hp-rp5700 HP RP5700 - benq Benq ED8 - benq-t31 Benq T31 - hippo Hippo (ATI) with jack detection, Sony UX-90s - hippo_1 Hippo (Benq) with jack detection - sony-assamd Sony ASSAMD - toshiba-s06 Toshiba S06 - toshiba-rx1 Toshiba RX1 - ultra Samsung Q1 Ultra Vista model - lenovo-3000 Lenovo 3000 y410 - nec NEC Versa S9100 - basic fixed pin assignment w/o SPDIF - auto auto-config reading BIOS (default) - - ALC267/268 - quanta-il1 Quanta IL1 mini-notebook - 3stack 3-stack model - toshiba Toshiba A205 - acer Acer laptops - acer-dmic Acer laptops with digital-mic - acer-aspire Acer Aspire One - dell Dell OEM laptops (Vostro 1200) - zepto Zepto laptops - test for testing/debugging purpose, almost all controls can - adjusted. Appearing only when compiled with - $CONFIG_SND_DEBUG=y - auto auto-config reading BIOS (default) - - ALC269 - basic Basic preset - quanta Quanta FL1 - eeepc-p703 ASUS Eeepc P703 P900A - eeepc-p901 ASUS Eeepc P901 S101 - fujitsu FSC Amilo - auto auto-config reading BIOS (default) - - ALC662/663 - 3stack-dig 3-stack (2-channel) with SPDIF - 3stack-6ch 3-stack (6-channel) - 3stack-6ch-dig 3-stack (6-channel) with SPDIF - 6stack-dig 6-stack with SPDIF - lenovo-101e Lenovo laptop - eeepc-p701 ASUS Eeepc P701 - eeepc-ep20 ASUS Eeepc EP20 - ecs ECS/Foxconn mobo - m51va ASUS M51VA - g71v ASUS G71V - h13 ASUS H13 - g50v ASUS G50V - asus-mode1 ASUS - asus-mode2 ASUS - asus-mode3 ASUS - asus-mode4 ASUS - asus-mode5 ASUS - asus-mode6 ASUS - auto auto-config reading BIOS (default) - - ALC882/885 - 3stack-dig 3-jack with SPDIF I/O - 6stack-dig 6-jack digital with SPDIF I/O - arima Arima W820Di1 - targa Targa T8, MSI-1049 T8 - asus-a7j ASUS A7J - asus-a7m ASUS A7M - macpro MacPro support - mbp3 Macbook Pro rev3 - imac24 iMac 24'' with jack detection - w2jc ASUS W2JC - auto auto-config reading BIOS (default) - - ALC883/888 - 3stack-dig 3-jack with SPDIF I/O - 6stack-dig 6-jack digital with SPDIF I/O - 3stack-6ch 3-jack 6-channel - 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O - 6stack-dig-demo 6-jack digital for Intel demo board - acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc) - acer-aspire Acer Aspire 9810 - acer-aspire-4930g Acer Aspire 4930G - medion Medion Laptops - medion-md2 Medion MD2 - targa-dig Targa/MSI - targa-2ch-dig Targs/MSI with 2-channel - laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE) - lenovo-101e Lenovo 101E - lenovo-nb0763 Lenovo NB0763 - lenovo-ms7195-dig Lenovo MS7195 - lenovo-sky Lenovo Sky - haier-w66 Haier W66 - 3stack-hp HP machines with 3stack (Lucknow, Samba boards) - 6stack-dell Dell machines with 6stack (Inspiron 530) - mitac Mitac 8252D - clevo-m720 Clevo M720 laptop series - fujitsu-pi2515 Fujitsu AMILO Pi2515 - fujitsu-xa3530 Fujitsu AMILO XA3530 - 3stack-6ch-intel Intel DG33* boards - auto auto-config reading BIOS (default) - - ALC861/660 - 3stack 3-jack - 3stack-dig 3-jack with SPDIF I/O - 6stack-dig 6-jack with SPDIF I/O - 3stack-660 3-jack (for ALC660) - uniwill-m31 Uniwill M31 laptop - toshiba Toshiba laptop support - asus Asus laptop support - asus-laptop ASUS F2/F3 laptops - auto auto-config reading BIOS (default) - - ALC861VD/660VD - 3stack 3-jack - 3stack-dig 3-jack with SPDIF OUT - 6stack-dig 6-jack with SPDIF OUT - 3stack-660 3-jack (for ALC660VD) - 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD) - lenovo Lenovo 3000 C200 - dallas Dallas laptops - hp HP TX1000 - asus-v1s ASUS V1Sn - auto auto-config reading BIOS (default) - - CMI9880 - minimal 3-jack in back - min_fp 3-jack in back, 2-jack in front - full 6-jack in back, 2-jack in front - full_dig 6-jack in back, 2-jack in front, SPDIF I/O - allout 5-jack in back, 2-jack in front, SPDIF out - auto auto-config reading BIOS (default) - - AD1882 / AD1882A - 3stack 3-stack mode (default) - 6stack 6-stack mode - - AD1884A / AD1883 / AD1984A / AD1984B - desktop 3-stack desktop (default) - laptop laptop with HP jack sensing - mobile mobile devices with HP jack sensing - thinkpad Lenovo Thinkpad X300 - - AD1884 - N/A - - AD1981 - basic 3-jack (default) - hp HP nx6320 - thinkpad Lenovo Thinkpad T60/X60/Z60 - toshiba Toshiba U205 - - AD1983 - N/A - - AD1984 - basic default configuration - thinkpad Lenovo Thinkpad T61/X61 - dell Dell T3400 - - AD1986A - 6stack 6-jack, separate surrounds (default) - 3stack 3-stack, shared surrounds - laptop 2-channel only (FSC V2060, Samsung M50) - laptop-eapd 2-channel with EAPD (ASUS A6J) - laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100) - ultra 2-channel with EAPD (Samsung Ultra tablet PC) - samsung 2-channel with EAPD (Samsung R65) - - AD1988/AD1988B/AD1989A/AD1989B - 6stack 6-jack - 6stack-dig ditto with SPDIF - 3stack 3-jack - 3stack-dig ditto with SPDIF - laptop 3-jack with hp-jack automute - laptop-dig ditto with SPDIF - auto auto-config reading BIOS (default) - - Conexant 5045 - laptop-hpsense Laptop with HP sense (old model laptop) - laptop-micsense Laptop with Mic sense (old model fujitsu) - laptop-hpmicsense Laptop with HP and Mic senses - benq Benq R55E - test for testing/debugging purpose, almost all controls - can be adjusted. Appearing only when compiled with - $CONFIG_SND_DEBUG=y - - Conexant 5047 - laptop Basic Laptop config - laptop-hp Laptop config for some HP models (subdevice 30A5) - laptop-eapd Laptop config with EAPD support - test for testing/debugging purpose, almost all controls - can be adjusted. Appearing only when compiled with - $CONFIG_SND_DEBUG=y - - Conexant 5051 - laptop Basic Laptop config (default) - hp HP Spartan laptop - - STAC9200 - ref Reference board - dell-d21 Dell (unknown) - dell-d22 Dell (unknown) - dell-d23 Dell (unknown) - dell-m21 Dell Inspiron 630m, Dell Inspiron 640m - dell-m22 Dell Latitude D620, Dell Latitude D820 - dell-m23 Dell XPS M1710, Dell Precision M90 - dell-m24 Dell Latitude 120L - dell-m25 Dell Inspiron E1505n - dell-m26 Dell Inspiron 1501 - dell-m27 Dell Inspiron E1705/9400 - gateway Gateway laptops with EAPD control - panasonic Panasonic CF-74 - - STAC9205/9254 - ref Reference board - dell-m42 Dell (unknown) - dell-m43 Dell Precision - dell-m44 Dell Inspiron - - STAC9220/9221 - ref Reference board - 3stack D945 3stack - 5stack D945 5stack + SPDIF - intel-mac-v1 Intel Mac Type 1 - intel-mac-v2 Intel Mac Type 2 - intel-mac-v3 Intel Mac Type 3 - intel-mac-v4 Intel Mac Type 4 - intel-mac-v5 Intel Mac Type 5 - intel-mac-auto Intel Mac (detect type according to subsystem id) - macmini Intel Mac Mini (equivalent with type 3) - macbook Intel Mac Book (eq. type 5) - macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3) - macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3) - imac-intel Intel iMac (eq. type 2) - imac-intel-20 Intel iMac (newer version) (eq. type 3) - dell-d81 Dell (unknown) - dell-d82 Dell (unknown) - dell-m81 Dell (unknown) - dell-m82 Dell XPS M1210 - - STAC9202/9250/9251 - ref Reference board, base config - m2-2 Some Gateway MX series laptops - m6 Some Gateway NX series laptops - pa6 Gateway NX860 series - - STAC9227/9228/9229/927x - ref Reference board - ref-no-jd Reference board without HP/Mic jack detection - 3stack D965 3stack - 5stack D965 5stack + SPDIF - dell-3stack Dell Dimension E520 - dell-bios Fixes with Dell BIOS setup - - STAC92HD71B* - ref Reference board - dell-m4-1 Dell desktops - dell-m4-2 Dell desktops - dell-m4-3 Dell desktops - - STAC92HD73* - ref Reference board - no-jd BIOS setup but without jack-detection - dell-m6-amic Dell desktops/laptops with analog mics - dell-m6-dmic Dell desktops/laptops with digital mics - dell-m6 Dell desktops/laptops with both type of mics - - STAC9872 - vaio Setup for VAIO FE550G/SZ110 - vaio-ar Setup for VAIO AR + models depending on the codec chip. The list of available models + is found in HD-Audio-Models.txt The model name "genric" is treated as a special case. When this model is given, the driver uses the generic codec parser without diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt new file mode 100644 index 000000000000..4b7ac21ea9eb --- /dev/null +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -0,0 +1,348 @@ + Model name Description + ---------- ----------- +ALC880 +====== + 3stack 3-jack in back and a headphone out + 3stack-digout 3-jack in back, a HP out and a SPDIF out + 5stack 5-jack in back, 2-jack in front + 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out + 6stack 6-jack in back, 2-jack in front + 6stack-digout 6-jack with a SPDIF out + w810 3-jack + z71v 3-jack (HP shared SPDIF) + asus 3-jack (ASUS Mobo) + asus-w1v ASUS W1V + asus-dig ASUS with SPDIF out + asus-dig2 ASUS with SPDIF out (using GPIO2) + uniwill 3-jack + fujitsu Fujitsu Laptops (Pi1536) + F1734 2-jack + lg LG laptop (m1 express dual) + lg-lw LG LW20/LW25 laptop + tcl TCL S700 + clevo Clevo laptops (m520G, m665n) + medion Medion Rim 2150 + test for testing/debugging purpose, almost all controls can be + adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y + auto auto-config reading BIOS (default) + +ALC260 +====== + hp HP machines + hp-3013 HP machines (3013-variant) + hp-dc7600 HP DC7600 + fujitsu Fujitsu S7020 + acer Acer TravelMate + will Will laptops (PB V7900) + replacer Replacer 672V + basic fixed pin assignment (old default model) + test for testing/debugging purpose, almost all controls can + adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y + auto auto-config reading BIOS (default) + +ALC262 +====== + fujitsu Fujitsu Laptop + hp-bpc HP xw4400/6400/8400/9400 laptops + hp-bpc-d7000 HP BPC D7000 + hp-tc-t5735 HP Thin Client T5735 + hp-rp5700 HP RP5700 + benq Benq ED8 + benq-t31 Benq T31 + hippo Hippo (ATI) with jack detection, Sony UX-90s + hippo_1 Hippo (Benq) with jack detection + sony-assamd Sony ASSAMD + toshiba-s06 Toshiba S06 + toshiba-rx1 Toshiba RX1 + ultra Samsung Q1 Ultra Vista model + lenovo-3000 Lenovo 3000 y410 + nec NEC Versa S9100 + basic fixed pin assignment w/o SPDIF + auto auto-config reading BIOS (default) + +ALC267/268 +========== + quanta-il1 Quanta IL1 mini-notebook + 3stack 3-stack model + toshiba Toshiba A205 + acer Acer laptops + acer-dmic Acer laptops with digital-mic + acer-aspire Acer Aspire One + dell Dell OEM laptops (Vostro 1200) + zepto Zepto laptops + test for testing/debugging purpose, almost all controls can + adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y + auto auto-config reading BIOS (default) + +ALC269 +====== + basic Basic preset + quanta Quanta FL1 + eeepc-p703 ASUS Eeepc P703 P900A + eeepc-p901 ASUS Eeepc P901 S101 + fujitsu FSC Amilo + auto auto-config reading BIOS (default) + +ALC662/663 +========== + 3stack-dig 3-stack (2-channel) with SPDIF + 3stack-6ch 3-stack (6-channel) + 3stack-6ch-dig 3-stack (6-channel) with SPDIF + 6stack-dig 6-stack with SPDIF + lenovo-101e Lenovo laptop + eeepc-p701 ASUS Eeepc P701 + eeepc-ep20 ASUS Eeepc EP20 + ecs ECS/Foxconn mobo + m51va ASUS M51VA + g71v ASUS G71V + h13 ASUS H13 + g50v ASUS G50V + asus-mode1 ASUS + asus-mode2 ASUS + asus-mode3 ASUS + asus-mode4 ASUS + asus-mode5 ASUS + asus-mode6 ASUS + auto auto-config reading BIOS (default) + +ALC882/885 +========== + 3stack-dig 3-jack with SPDIF I/O + 6stack-dig 6-jack digital with SPDIF I/O + arima Arima W820Di1 + targa Targa T8, MSI-1049 T8 + asus-a7j ASUS A7J + asus-a7m ASUS A7M + macpro MacPro support + mbp3 Macbook Pro rev3 + imac24 iMac 24'' with jack detection + w2jc ASUS W2JC + auto auto-config reading BIOS (default) + +ALC883/888 +========== + 3stack-dig 3-jack with SPDIF I/O + 6stack-dig 6-jack digital with SPDIF I/O + 3stack-6ch 3-jack 6-channel + 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O + 6stack-dig-demo 6-jack digital for Intel demo board + acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc) + acer-aspire Acer Aspire 9810 + acer-aspire-4930g Acer Aspire 4930G + medion Medion Laptops + medion-md2 Medion MD2 + targa-dig Targa/MSI + targa-2ch-dig Targs/MSI with 2-channel + laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE) + lenovo-101e Lenovo 101E + lenovo-nb0763 Lenovo NB0763 + lenovo-ms7195-dig Lenovo MS7195 + lenovo-sky Lenovo Sky + haier-w66 Haier W66 + 3stack-hp HP machines with 3stack (Lucknow, Samba boards) + 6stack-dell Dell machines with 6stack (Inspiron 530) + mitac Mitac 8252D + clevo-m720 Clevo M720 laptop series + fujitsu-pi2515 Fujitsu AMILO Pi2515 + fujitsu-xa3530 Fujitsu AMILO XA3530 + 3stack-6ch-intel Intel DG33* boards + auto auto-config reading BIOS (default) + +ALC861/660 +========== + 3stack 3-jack + 3stack-dig 3-jack with SPDIF I/O + 6stack-dig 6-jack with SPDIF I/O + 3stack-660 3-jack (for ALC660) + uniwill-m31 Uniwill M31 laptop + toshiba Toshiba laptop support + asus Asus laptop support + asus-laptop ASUS F2/F3 laptops + auto auto-config reading BIOS (default) + +ALC861VD/660VD +============== + 3stack 3-jack + 3stack-dig 3-jack with SPDIF OUT + 6stack-dig 6-jack with SPDIF OUT + 3stack-660 3-jack (for ALC660VD) + 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD) + lenovo Lenovo 3000 C200 + dallas Dallas laptops + hp HP TX1000 + asus-v1s ASUS V1Sn + auto auto-config reading BIOS (default) + +CMI9880 +======= + minimal 3-jack in back + min_fp 3-jack in back, 2-jack in front + full 6-jack in back, 2-jack in front + full_dig 6-jack in back, 2-jack in front, SPDIF I/O + allout 5-jack in back, 2-jack in front, SPDIF out + auto auto-config reading BIOS (default) + +AD1882 / AD1882A +================ + 3stack 3-stack mode (default) + 6stack 6-stack mode + +AD1884A / AD1883 / AD1984A / AD1984B +==================================== + desktop 3-stack desktop (default) + laptop laptop with HP jack sensing + mobile mobile devices with HP jack sensing + thinkpad Lenovo Thinkpad X300 + +AD1884 +====== + N/A + +AD1981 +====== + basic 3-jack (default) + hp HP nx6320 + thinkpad Lenovo Thinkpad T60/X60/Z60 + toshiba Toshiba U205 + +AD1983 +====== + N/A + +AD1984 +====== + basic default configuration + thinkpad Lenovo Thinkpad T61/X61 + dell Dell T3400 + +AD1986A +======= + 6stack 6-jack, separate surrounds (default) + 3stack 3-stack, shared surrounds + laptop 2-channel only (FSC V2060, Samsung M50) + laptop-eapd 2-channel with EAPD (ASUS A6J) + laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100) + ultra 2-channel with EAPD (Samsung Ultra tablet PC) + samsung 2-channel with EAPD (Samsung R65) + +AD1988/AD1988B/AD1989A/AD1989B +============================== + 6stack 6-jack + 6stack-dig ditto with SPDIF + 3stack 3-jack + 3stack-dig ditto with SPDIF + laptop 3-jack with hp-jack automute + laptop-dig ditto with SPDIF + auto auto-config reading BIOS (default) + +Conexant 5045 +============= + laptop-hpsense Laptop with HP sense (old model laptop) + laptop-micsense Laptop with Mic sense (old model fujitsu) + laptop-hpmicsense Laptop with HP and Mic senses + benq Benq R55E + test for testing/debugging purpose, almost all controls + can be adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y + +Conexant 5047 +============= + laptop Basic Laptop config + laptop-hp Laptop config for some HP models (subdevice 30A5) + laptop-eapd Laptop config with EAPD support + test for testing/debugging purpose, almost all controls + can be adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y + +Conexant 5051 +============= + laptop Basic Laptop config (default) + hp HP Spartan laptop + +STAC9200 +======== + ref Reference board + dell-d21 Dell (unknown) + dell-d22 Dell (unknown) + dell-d23 Dell (unknown) + dell-m21 Dell Inspiron 630m, Dell Inspiron 640m + dell-m22 Dell Latitude D620, Dell Latitude D820 + dell-m23 Dell XPS M1710, Dell Precision M90 + dell-m24 Dell Latitude 120L + dell-m25 Dell Inspiron E1505n + dell-m26 Dell Inspiron 1501 + dell-m27 Dell Inspiron E1705/9400 + gateway Gateway laptops with EAPD control + panasonic Panasonic CF-74 + +STAC9205/9254 +============= + ref Reference board + dell-m42 Dell (unknown) + dell-m43 Dell Precision + dell-m44 Dell Inspiron + +STAC9220/9221 +============= + ref Reference board + 3stack D945 3stack + 5stack D945 5stack + SPDIF + intel-mac-v1 Intel Mac Type 1 + intel-mac-v2 Intel Mac Type 2 + intel-mac-v3 Intel Mac Type 3 + intel-mac-v4 Intel Mac Type 4 + intel-mac-v5 Intel Mac Type 5 + intel-mac-auto Intel Mac (detect type according to subsystem id) + macmini Intel Mac Mini (equivalent with type 3) + macbook Intel Mac Book (eq. type 5) + macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3) + macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3) + imac-intel Intel iMac (eq. type 2) + imac-intel-20 Intel iMac (newer version) (eq. type 3) + dell-d81 Dell (unknown) + dell-d82 Dell (unknown) + dell-m81 Dell (unknown) + dell-m82 Dell XPS M1210 + +STAC9202/9250/9251 +================== + ref Reference board, base config + m2-2 Some Gateway MX series laptops + m6 Some Gateway NX series laptops + pa6 Gateway NX860 series + +STAC9227/9228/9229/927x +======================= + ref Reference board + ref-no-jd Reference board without HP/Mic jack detection + 3stack D965 3stack + 5stack D965 5stack + SPDIF + dell-3stack Dell Dimension E520 + dell-bios Fixes with Dell BIOS setup + +STAC92HD71B* +============ + ref Reference board + dell-m4-1 Dell desktops + dell-m4-2 Dell desktops + dell-m4-3 Dell desktops + +STAC92HD73* +=========== + ref Reference board + no-jd BIOS setup but without jack-detection + dell-m6-amic Dell desktops/laptops with analog mics + dell-m6-dmic Dell desktops/laptops with digital mics + dell-m6 Dell desktops/laptops with both type of mics + +STAC92HD83* +=========== + ref Reference board + +STAC9872 +======== + vaio Setup for VAIO FE550G/SZ110 + vaio-ar Setup for VAIO AR -- cgit v1.2.3 From e76f42761197dd6e9405e2eeb35932acfede115a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 13 Nov 2008 17:30:13 -0600 Subject: ACPI: fix 2.6.28 acpi.debug_level regression acpi_early_init() was changed to over-write the cmdline param, making it really inconvenient to set debug flags at boot-time. Also, This sets the default level to "info", which is what all the ACPI drivers use. So to enable messages from drivers, you only have to supply the "layer" (a.k.a. "component"). For non-"info" ACPI core and ACPI interpreter messages, you have to supply both level and layer masks, as before. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- Documentation/kernel-parameters.txt | 11 +++++++---- drivers/acpi/bus.c | 8 -------- drivers/acpi/utilities/utglobal.c | 2 +- include/acpi/acoutput.h | 2 +- 4 files changed, 9 insertions(+), 14 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e0f346d201ed..c9115c1b672c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -220,14 +220,17 @@ and is between 256 and 4096 characters. It is defined in the file Bits in debug_level correspond to a level in ACPI_DEBUG_PRINT statements, e.g., ACPI_DEBUG_PRINT((ACPI_DB_INFO, ... - See Documentation/acpi/debug.txt for more information - about debug layers and levels. + The debug_level mask defaults to "info". See + Documentation/acpi/debug.txt for more information about + debug layers and levels. + Enable processor driver info messages: + acpi.debug_layer=0x20000000 + Enable PCI/PCI interrupt routing info messages: + acpi.debug_layer=0x400000 Enable AML "Debug" output, i.e., stores to the Debug object while interpreting AML: acpi.debug_layer=0xffffffff acpi.debug_level=0x2 - Enable PCI/PCI interrupt routing info messages: - acpi.debug_layer=0x400000 acpi.debug_level=0x4 Enable all messages related to ACPI hardware: acpi.debug_layer=0x2 acpi.debug_level=0xffffffff diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 7edf6d913c13..765fd1c56cd6 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -688,14 +688,6 @@ void __init acpi_early_init(void) if (acpi_disabled) return; - /* - * ACPI CA initializes acpi_dbg_level to non-zero, which means - * we get debug output merely by turning on CONFIG_ACPI_DEBUG. - * Turn it off so we don't get output unless the user specifies - * acpi.debug_level. - */ - acpi_dbg_level = 0; - printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); /* enable workarounds, unless strict ACPI spec. compliance */ diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c index 670551b95e56..17ed5ac840f7 100644 --- a/drivers/acpi/utilities/utglobal.c +++ b/drivers/acpi/utilities/utglobal.c @@ -64,7 +64,7 @@ u32 acpi_dbg_level = ACPI_DEBUG_DEFAULT; /* Debug switch - layer (component) mask */ -u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS; +u32 acpi_dbg_layer = 0; u32 acpi_gbl_nesting_level = 0; /* Debugger globals */ diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h index 09d33c7740f0..db8852d8bcf7 100644 --- a/include/acpi/acoutput.h +++ b/include/acpi/acoutput.h @@ -172,7 +172,7 @@ /* Defaults for debug_level, debug and normal */ -#define ACPI_DEBUG_DEFAULT (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT) +#define ACPI_DEBUG_DEFAULT (ACPI_LV_INFO) #define ACPI_NORMAL_DEFAULT (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT) #define ACPI_DEBUG_ALL (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL) -- cgit v1.2.3 From 692f90421d3716ef0d0f120d9d2c9684009a4a01 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 19 Dec 2008 12:44:46 +0100 Subject: ALSA: hda - Fix HD-Audio.txt reference of model list The model list is now in HD-Audio-Models.txt. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 642a2b012541..8d68fff71839 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -162,8 +162,8 @@ PCI SSID look-up. What `model` option values are available depends on the codec chip. Check your codec chip from the codec proc file (see "Codec Proc-File" section below). It will show the vendor/product name of your codec -chip. Then, see Documentation/sound/alsa/ALSA-Configuration.txt -file, the section of HD-audio driver. You can find a list of codecs +chip. Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file, +the section of HD-audio driver. You can find a list of codecs and `model` options belonging to each codec. For example, for Realtek ALC262 codec chip, pass `model=ultra` for devices that are compatible with Samsung Q1 Ultra. -- cgit v1.2.3 From d4d9cd0338892e7f0d65f8a110473d175535cd5d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 19 Dec 2008 15:19:11 +0100 Subject: ALSA: hda - Add probe_only option Added probe_only module option to hd-audio driver. This option specifies whether the driver creates and initializes the codec-parser after probing. When this option is set, the driver skips the codec parsing and initialization but gives you proc and other accesses. It's useful to see the initial codec state for debugging. The default of this value is off, so the default behavior is as same as before. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 2 ++ sound/pci/hda/hda_codec.c | 12 +++++++----- sound/pci/hda/hda_codec.h | 2 +- sound/pci/hda/hda_intel.c | 11 ++++++++--- 4 files changed, 18 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index a4f3a22caba3..ee45454c50be 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -757,6 +757,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. model - force the model name position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF) probe_mask - Bitmask to probe codecs (default = -1, meaning all slots) + probe_only - Only probing and no codec initialization (default=off); + Useful to check the initial codec status for debugging bdl_pos_adj - Specifies the DMA IRQ timing delay in samples. Passing -1 will make the driver to choose the appropriate value based on the controller chip. diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 625fe5984dd6..e16cf63821ae 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -709,7 +709,7 @@ static void snd_hda_codec_free(struct hda_codec *codec) * Returns 0 if successful, or a negative error code. */ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr, - struct hda_codec **codecp) + int do_init, struct hda_codec **codecp) { struct hda_codec *codec; char component[31]; @@ -793,10 +793,12 @@ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr if (bus->modelname) codec->modelname = kstrdup(bus->modelname, GFP_KERNEL); - err = snd_hda_codec_configure(codec); - if (err < 0) { - snd_hda_codec_free(codec); - return err; + if (do_init) { + err = snd_hda_codec_configure(codec); + if (err < 0) { + snd_hda_codec_free(codec); + return err; + } } snd_hda_codec_proc_new(codec); diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 5587d416229f..729fc7642d7f 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -811,7 +811,7 @@ enum { int snd_hda_bus_new(struct snd_card *card, const struct hda_bus_template *temp, struct hda_bus **busp); int snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr, - struct hda_codec **codecp); + int do_init, struct hda_codec **codecp); /* * low level functions diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index a26ae8c4cf70..6613b6bef9eb 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -58,6 +58,7 @@ static char *model[SNDRV_CARDS]; static int position_fix[SNDRV_CARDS]; static int bdl_pos_adj[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1}; static int probe_mask[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1}; +static int probe_only[SNDRV_CARDS]; static int single_cmd; static int enable_msi; @@ -76,6 +77,8 @@ module_param_array(bdl_pos_adj, int, NULL, 0644); MODULE_PARM_DESC(bdl_pos_adj, "BDL position adjustment offset."); module_param_array(probe_mask, int, NULL, 0444); MODULE_PARM_DESC(probe_mask, "Bitmask to probe codecs (default = -1)."); +module_param_array(probe_only, bool, NULL, 0444); +MODULE_PARM_DESC(probe_only, "Only probing and no codec initialization."); module_param(single_cmd, bool, 0444); MODULE_PARM_DESC(single_cmd, "Use single command to communicate with codecs " "(for debugging only)."); @@ -1224,7 +1227,8 @@ static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] __devinitdata = { }; static int __devinit azx_codec_create(struct azx *chip, const char *model, - unsigned int codec_probe_mask) + unsigned int codec_probe_mask, + int no_init) { struct hda_bus_template bus_temp; int c, codecs, err; @@ -1282,7 +1286,7 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model, for (c = 0; c < max_slots; c++) { if ((chip->codec_mask & (1 << c)) & codec_probe_mask) { struct hda_codec *codec; - err = snd_hda_codec_new(chip->bus, c, &codec); + err = snd_hda_codec_new(chip->bus, c, !no_init, &codec); if (err < 0) continue; codecs++; @@ -2340,7 +2344,8 @@ static int __devinit azx_probe(struct pci_dev *pci, card->private_data = chip; /* create codec instances */ - err = azx_codec_create(chip, model[dev], probe_mask[dev]); + err = azx_codec_create(chip, model[dev], probe_mask[dev], + probe_only[dev]); if (err < 0) goto out_free; -- cgit v1.2.3 From 67bac792cd0c05b4b6e0393c32605b028b8dd533 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Fri, 19 Dec 2008 13:47:30 -0800 Subject: x86: PAT: pfnmap documentation update changes Impact: Documentation only. Documentation updates as per Randy Dunlap's comments. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin --- Documentation/x86/pat.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/x86/pat.txt b/Documentation/x86/pat.txt index 1784ff276997..cf08c9fff3cd 100644 --- a/Documentation/x86/pat.txt +++ b/Documentation/x86/pat.txt @@ -82,23 +82,23 @@ pci proc | -- | -- | WC | Advanced APIs for drivers ------------------------- -A. Exporting pages to user with remap_pfn_range, io_remap_pfn_range, +A. Exporting pages to users with remap_pfn_range, io_remap_pfn_range, vm_insert_pfn -Drivers wanting to export some pages to userspace, do it by using mmap +Drivers wanting to export some pages to userspace do it by using mmap interface and a combination of 1) pgprot_noncached() 2) io_remap_pfn_range() or remap_pfn_range() or vm_insert_pfn() -With pat support, a new API pgprot_writecombine is being added. So, driver can +With PAT support, a new API pgprot_writecombine is being added. So, drivers can continue to use the above sequence, with either pgprot_noncached() or pgprot_writecombine() in step 1, followed by step 2. In addition, step 2 internally tracks the region as UC or WC in memtype list in order to ensure no conflicting mapping. -Note that this set of APIs only work with IO (non RAM) regions. If driver -wants to export RAM region, it has to do set_memory_uc() or set_memory_wc() +Note that this set of APIs only works with IO (non RAM) regions. If driver +wants to export a RAM region, it has to do set_memory_uc() or set_memory_wc() as step 0 above and also track the usage of those pages and use set_memory_wb() before the page is freed to free pool. -- cgit v1.2.3 From 776d6c298aad42c2b8f191fa9ad826075e4d588c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 11 Dec 2008 19:15:14 +0900 Subject: sh: Kill off remaining CONFIG_SH_KGDB bits. Now that we use the generic stub, kill off all of the left over references. Signed-off-by: Paul Mundt --- Documentation/sh/kgdb.txt | 179 --------------------------------------------- arch/sh/kernel/Makefile_64 | 1 - 2 files changed, 180 deletions(-) delete mode 100644 Documentation/sh/kgdb.txt (limited to 'Documentation') diff --git a/Documentation/sh/kgdb.txt b/Documentation/sh/kgdb.txt deleted file mode 100644 index 05b4ba89d28c..000000000000 --- a/Documentation/sh/kgdb.txt +++ /dev/null @@ -1,179 +0,0 @@ - -This file describes the configuration and behavior of KGDB for the SH -kernel. Based on a description from Henry Bell , it -has been modified to account for quirks in the current implementation. - -Version -======= - -This version of KGDB was written for 2.4.xx kernels for the SH architecture. -Further documentation is available from the linux-sh project website. - - -Debugging Setup: Host -====================== - -The two machines will be connected together via a serial line - this -should be a null modem cable i.e. with a twist. - -On your DEVELOPMENT machine, go to your kernel source directory and -build the kernel, enabling KGDB support in the "kernel hacking" section. -This includes the KGDB code, and also makes the kernel be compiled with -the "-g" option set -- necessary for debugging. - -To install this new kernel, use the following installation procedure. - -Decide on which tty port you want the machines to communicate, then -cable them up back-to-back using the null modem. On the DEVELOPMENT -machine, you may wish to create an initialization file called .gdbinit -(in the kernel source directory or in your home directory) to execute -commonly-used commands at startup. - -A minimal .gdbinit might look like this: - - file vmlinux - set remotebaud 115200 - target remote /dev/ttyS0 - -Change the "target" definition so that it specifies the tty port that -you intend to use. Change the "remotebaud" definition to match the -data rate that you are going to use for the com line (115200 is the -default). - -Debugging Setup: Target -======================== - -By default, the KGDB stub will communicate with the host GDB using -ttySC1 at 115200 baud, 8 databits, no parity; these defaults can be -changed in the kernel configuration. As the kernel starts up, KGDB will -initialize so that breakpoints, kernel segfaults, and so forth will -generally enter the debugger. - -This behavior can be modified by including the "kgdb" option in the -kernel command line; this option has the general form: - - kgdb=, - -The indicates the port to use, and can optionally specify -baud, parity and databits -- e.g. "ttySC0,9600N8" or "ttySC1,19200". - -The can be "halt" or "disabled". The "halt" action enters the -debugger via a breakpoint as soon as kgdb is initialized; the "disabled" -action causes kgdb to ignore kernel segfaults and such until explicitly -entered by a breakpoint in the code or by external action (sysrq or NMI). - -(Both and can appear alone, w/o the separating comma.) - -For example, if you wish to debug early in kernel startup code, you -might specify the halt option: - - kgdb=halt - -Boot the TARGET machine, which will appear to hang. - -On your DEVELOPMENT machine, cd to the source directory and run the gdb -program. (This is likely to be a cross GDB which runs on your host but -is built for an SH target.) If everything is working correctly you -should see gdb print out a few lines indicating that a breakpoint has -been taken. It will actually show a line of code in the target kernel -inside the gdbstub activation code. - -NOTE: BE SURE TO TERMINATE OR SUSPEND any other host application which -may be using the same serial port (for example, a terminal emulator you -have been using to connect to the target boot code.) Otherwise, data -from the target may not all get to GDB! - -You can now use whatever gdb commands you like to set breakpoints. -Enter "continue" to start your target machine executing again. At this -point the target system will run at full speed until it encounters -your breakpoint or gets a segment violation in the kernel, or whatever. - -Serial Ports: KGDB, Console -============================ - -This version of KGDB may not gracefully handle conflict with other -drivers in the kernel using the same port. If KGDB is configured on the -same port (and with the same parameters) as the kernel console, or if -CONFIG_SH_KGDB_CONSOLE is configured, things should be fine (though in -some cases console messages may appear twice through GDB). But if the -KGDB port is not the kernel console and used by another serial driver -which assumes different serial parameters (e.g. baud rate) KGDB may not -recover. - -Also, when KGDB is entered via sysrq-g (requires CONFIG_KGDB_SYSRQ) and -the kgdb port uses the same port as the console, detaching GDB will not -restore the console to working order without the port being re-opened. - -Another serious consequence of this is that GDB currently CANNOT break -into KGDB externally (e.g. via ^C or ); unless a breakpoint or -error is encountered, the only way to enter KGDB after the initial halt -(see above) is via NMI (CONFIG_KGDB_NMI) or sysrq-g (CONFIG_KGDB_SYSRQ). - -Code is included for the basic Hitachi Solution Engine boards to allow -the use of ttyS0 for KGDB if desired; this is less robust, but may be -useful in some cases. (This cannot be selected using the config file, -but only through the kernel command line, e.g. "kgdb=ttyS0", though the -configured defaults for baud rate etc. still apply if not overridden.) - -If gdbstub Does Not Work -======================== - -If it doesn't work, you will have to troubleshoot it. Do the easy -things first like double checking your cabling and data rates. You -might try some non-kernel based programs to see if the back-to-back -connection works properly. Just something simple like cat /etc/hosts -/dev/ttyS0 on one machine and cat /dev/ttyS0 on the other will tell you -if you can send data from one machine to the other. There is no point -in tearing out your hair in the kernel if the line doesn't work. - -If you need to debug the GDB/KGDB communication itself, the gdb commands -"set debug remote 1" and "set debug serial 1" may be useful, but be -warned: they produce a lot of output. - -Threads -======= - -Each process in a target machine is seen as a gdb thread. gdb thread related -commands (info threads, thread n) can be used. CONFIG_KGDB_THREAD must -be defined for this to work. - -In this version, kgdb reports PID_MAX (32768) as the process ID for the -idle process (pid 0), since GDB does not accept 0 as an ID. - -Detaching (exiting KGDB) -========================= - -There are two ways to resume full-speed target execution: "continue" and -"detach". With "continue", GDB inserts any specified breakpoints in the -target code and resumes execution; the target is still in "gdb mode". -If a breakpoint or other debug event (e.g. NMI) happens, the target -halts and communicates with GDB again, which is waiting for it. - -With "detach", GDB does *not* insert any breakpoints; target execution -is resumed and GDB stops communicating (does not wait for the target). -In this case, the target is no longer in "gdb mode" -- for example, -console messages no longer get sent separately to the KGDB port, or -encapsulated for GDB. If a debug event (e.g. NMI) occurs, the target -will re-enter "gdb mode" and will display this fact on the console; you -must give a new "target remote" command to gdb. - -NOTE: TO AVOID LOSSING CONSOLE MESSAGES IN CASE THE KERNEL CONSOLE AND -KGDB USING THE SAME PORT, THE TARGET WAITS FOR ANY INPUT CHARACTER ON -THE KGDB PORT AFTER A DETACH COMMAND. For example, after the detach you -could start a terminal emulator on the same host port and enter a ; -however, this program must then be terminated or suspended in order to -use GBD again if KGDB is re-entered. - - -Acknowledgements -================ - -This code was mostly generated by Henry Bell ; -largely from KGDB by Amit S. Kale - extracts from -code by Glenn Engel, Jim Kingdon, David Grothe , Tigran -Aivazian , William Gatliff , Ben -Lee, Steve Chamberlain and Benoit Miller are also -included. - -Jeremy Siegel - diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index ae4afc090062..678408cc35ca 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -9,7 +9,6 @@ obj-$(CONFIG_VSYSCALL) += vsyscall/ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_CF_ENABLER) += cf-enabler.o obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o -obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o obj-$(CONFIG_MODULES) += sh_ksyms_64.o module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -- cgit v1.2.3 From 8a655053ca1593dd160dac2a4ee638fdec037d86 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 17 Dec 2008 15:06:54 +0900 Subject: doc: Update sh cpufreq documentation. The sh cpufreq driver is no longer limited to just the SH-3 and SH-4, update the documentation to reflect this fact accordingly. Signed-off-by: Paul Mundt --- Documentation/cpu-freq/user-guide.txt | 6 ++---- arch/sh/Kconfig | 8 ++++++-- 2 files changed, 8 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt index 4f3f3840320e..e3443ddcfb89 100644 --- a/Documentation/cpu-freq/user-guide.txt +++ b/Documentation/cpu-freq/user-guide.txt @@ -93,10 +93,8 @@ Several "PowerBook" and "iBook2" notebooks are supported. 1.5 SuperH ---------- -The following SuperH processors are supported by cpufreq: - -SH-3 -SH-4 +All SuperH processors supporting rate rounding through the clock +framework are supported by cpufreq. 1.6 Blackfin ------------ diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 03c773b74bd2..bef19f5bde7f 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -469,8 +469,12 @@ config SH_CPU_FREQ depends on CPU_FREQ select CPU_FREQ_TABLE help - This adds the cpufreq driver for SuperH. At present, only - the SH-4 is supported. + This adds the cpufreq driver for SuperH. Any CPU that supports + clock rate rounding through the clock framework can use this + driver. While it will make the kernel slightly larger, this is + harmless for CPUs that don't support rate rounding. The driver + will also generate a notice in the boot log before disabling + itself if the CPU in question is not capable of rate rounding. For details, take a look at . -- cgit v1.2.3 From 2b1a61f0a8c714c96277bf16a823a84bafa1397d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 25 Dec 2008 13:39:23 +0100 Subject: [S390] cpu topology: introduce kernel parameter Introduce a topology=[on|off] kernel parameter which allows to switch cpu topology on/off. Default will be off, since it looks like that for some workloards this doesn't behave very well (on s390). Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- Documentation/kernel-parameters.txt | 8 ++++++++ arch/s390/kernel/topology.c | 12 +++++++++++- 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c9115c1b672c..09ede6c90ad7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2252,6 +2252,14 @@ and is between 256 and 4096 characters. It is defined in the file See comment before function dc390_setup() in drivers/scsi/tmscsim.c. + topology= [S390] + Format: {off | on} + Specify if the kernel should make use of the cpu + topology informations if the hardware supports these. + The scheduler will make use of these informations and + e.g. base its process migration decisions on it. + Default is off. + tp720= [HW,PS2] trix= [HW,OSS] MediaTrix AudioTrix Pro diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 36faac50e774..71e6f56bfead 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -58,6 +58,7 @@ struct core_info { cpumask_t mask; }; +static int topology_enabled; static void topology_work_fn(struct work_struct *work); static struct tl_info *tl_info; static struct core_info core_info; @@ -78,7 +79,7 @@ cpumask_t cpu_coregroup_map(unsigned int cpu) cpumask_t mask; cpus_clear(mask); - if (!machine_has_topology) + if (!topology_enabled || !machine_has_topology) return cpu_possible_map; spin_lock_irqsave(&topology_lock, flags); while (core) { @@ -263,6 +264,15 @@ static void topology_interrupt(__u16 code) schedule_work(&topology_work); } +static int __init early_parse_topology(char *p) +{ + if (strncmp(p, "on", 2)) + return 0; + topology_enabled = 1; + return 0; +} +early_param("topology", early_parse_topology); + static int __init init_topology_update(void) { int rc; -- cgit v1.2.3 From cef7125def4dd104769f400c941199614da0aca1 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Thu, 25 Dec 2008 13:39:55 +0100 Subject: [S390] provide documentation for hvc_iucv kernel parameter. Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky --- Documentation/kernel-parameters.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 09ede6c90ad7..12f0fb6faaf6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -814,6 +814,9 @@ and is between 256 and 4096 characters. It is defined in the file hlt [BUGS=ARM,SH] + hvc_iucv= [S390] Number of z/VM IUCV Hypervisor console (HVC) + back-ends. Valid parameters: 0..8 + i8042.debug [HW] Toggle i8042 debug mode i8042.direct [HW] Put keyboard port into non-translated mode i8042.dumbkbd [HW] Pretend that controller can only read data from -- cgit v1.2.3 From 42364690992e592c05f85c76fda4055820b48c1b Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Mon, 24 Nov 2008 10:46:29 +0100 Subject: Documentation: remove reference to ll_rw_blk.c and moved drivers/block/elevator.c The drivers/block/ll_rw_block.c has been split and organized in the block/ directory, and also drivers/block/elevator.c has been moved to the block/ directory. Update Documentation/block/biodoc.txt accordingly Signed-off-by: Nikanth Karthikesan Signed-off-by: Jens Axboe --- Documentation/block/biodoc.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 4dbb8be1c991..3c5434c83daf 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -914,7 +914,7 @@ I/O scheduler, a.k.a. elevator, is implemented in two layers. Generic dispatch queue and specific I/O schedulers. Unless stated otherwise, elevator is used to refer to both parts and I/O scheduler to specific I/O schedulers. -Block layer implements generic dispatch queue in ll_rw_blk.c and elevator.c. +Block layer implements generic dispatch queue in block/*.c. The generic dispatch queue is responsible for properly ordering barrier requests, requeueing, handling non-fs requests and all other subtleties. @@ -926,8 +926,8 @@ be built inside the kernel. Each queue can choose different one and can also change to another one dynamically. A block layer call to the i/o scheduler follows the convention elv_xxx(). This -calls elevator_xxx_fn in the elevator switch (drivers/block/elevator.c). Oh, -xxx and xxx might not match exactly, but use your imagination. If an elevator +calls elevator_xxx_fn in the elevator switch (block/elevator.c). Oh, xxx +and xxx might not match exactly, but use your imagination. If an elevator doesn't implement a function, the switch does nothing or some minimal house keeping work. -- cgit v1.2.3 From 5bfb4093be6ac7b6c06c8e6461d85241654acc61 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Thu, 25 Dec 2008 17:19:02 +0800 Subject: [ARM] pxa: add document on the MFP design and how to use it Signed-off-by: Eric Miao --- Documentation/arm/pxa/mfp.txt | 286 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 286 insertions(+) create mode 100644 Documentation/arm/pxa/mfp.txt (limited to 'Documentation') diff --git a/Documentation/arm/pxa/mfp.txt b/Documentation/arm/pxa/mfp.txt new file mode 100644 index 000000000000..a179e5bc02c9 --- /dev/null +++ b/Documentation/arm/pxa/mfp.txt @@ -0,0 +1,286 @@ + MFP Configuration for PXA2xx/PXA3xx Processors + + Eric Miao + +MFP stands for Multi-Function Pin, which is the pin-mux logic on PXA3xx and +later PXA series processors. This document describes the existing MFP API, +and how board/platform driver authors could make use of it. + + Basic Concept +=============== + +Unlike the GPIO alternate function settings on PXA25x and PXA27x, a new MFP +mechanism is introduced from PXA3xx to completely move the pin-mux functions +out of the GPIO controller. In addition to pin-mux configurations, the MFP +also controls the low power state, driving strength, pull-up/down and event +detection of each pin. Below is a diagram of internal connections between +the MFP logic and the remaining SoC peripherals: + + +--------+ + | |--(GPIO19)--+ + | GPIO | | + | |--(GPIO...) | + +--------+ | + | +---------+ + +--------+ +------>| | + | PWM2 |--(PWM_OUT)-------->| MFP | + +--------+ +------>| |-------> to external PAD + | +---->| | + +--------+ | | +-->| | + | SSP2 |---(TXD)----+ | | +---------+ + +--------+ | | + | | + +--------+ | | + | Keypad |--(MKOUT4)----+ | + +--------+ | + | + +--------+ | + | UART2 |---(TXD)--------+ + +--------+ + +NOTE: the external pad is named as MFP_PIN_GPIO19, it doesn't necessarily +mean it's dedicated for GPIO19, only as a hint that internally this pin +can be routed from GPIO19 of the GPIO controller. + +To better understand the change from PXA25x/PXA27x GPIO alternate function +to this new MFP mechanism, here are several key points: + + 1. GPIO controller on PXA3xx is now a dedicated controller, same as other + internal controllers like PWM, SSP and UART, with 128 internal signals + which can be routed to external through one or more MFPs (e.g. GPIO<0> + can be routed through either MFP_PIN_GPIO0 as well as MFP_PIN_GPIO0_2, + see arch/arm/mach-pxa/mach/include/mfp-pxa300.h) + + 2. Alternate function configuration is removed from this GPIO controller, + the remaining functions are pure GPIO-specific, i.e. + + - GPIO signal level control + - GPIO direction control + - GPIO level change detection + + 3. Low power state for each pin is now controlled by MFP, this means the + PGSRx registers on PXA2xx are now useless on PXA3xx + + 4. Wakeup detection is now controlled by MFP, PWER does not control the + wakeup from GPIO(s) any more, depending on the sleeping state, ADxER + (as defined in pxa3xx-regs.h) controls the wakeup from MFP + +NOTE: with such a clear separation of MFP and GPIO, by GPIO we normally +mean it is a GPIO signal, and by MFP or pin xxx, we mean a physical +pad (or ball). + + MFP API Usage +=============== + +For board code writers, here are some guidelines: + +1. include ONE of the following header files in your .c: + + - #include + - #include + - #include + - #include + - #include + + NOTE: only one file in your .c, depending on the processors used, + because pin configuration definitions may conflict in these file (i.e. + same name, different meaning and settings on different processors). E.g. + for zylonite platform, which support both PXA300/PXA310 and PXA320, two + separate files are introduced: zylonite_pxa300.c and zylonite_pxa320.c + (in addition to handle MFP configuration differences, they also handle + the other differences between the two combinations). + + NOTE: PXA300 and PXA310 are almost identical in pin configurations (with + PXA310 supporting some additional ones), thus the difference is actually + covered in a single mfp-pxa300.h. + +2. prepare an array for the initial pin configurations, e.g.: + + static unsigned long mainstone_pin_config[] __initdata = { + /* Chip Select */ + GPIO15_nCS_1, + + /* LCD - 16bpp Active TFT */ + GPIOxx_TFT_LCD_16BPP, + GPIO16_PWM0_OUT, /* Backlight */ + + /* MMC */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + + ... + + /* GPIO */ + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, + }; + + a) once the pin configurations are passed to pxa{2xx,3xx}_mfp_config(), + and written to the actual registers, they are useless and may discard, + adding '__initdata' will help save some additional bytes here. + + b) when there is only one possible pin configurations for a component, + some simplified definitions can be used, e.g. GPIOxx_TFT_LCD_16BPP on + PXA25x and PXA27x processors + + c) if by board design, a pin can be configured to wake up the system + from low power state, it can be 'OR'ed with any of: + + WAKEUP_ON_EDGE_BOTH + WAKEUP_ON_EDGE_RISE + WAKEUP_ON_EDGE_FALL + WAKEUP_ON_LEVEL_HIGH - specifically for enabling of keypad GPIOs, + + to indicate that this pin has the capability of wake-up the system, + and on which edge(s). This, however, doesn't necessarily mean the + pin _will_ wakeup the system, it will only when set_irq_wake() is + invoked with the corresponding GPIO IRQ (GPIO_IRQ(xx) or gpio_to_irq()) + and eventually calls gpio_set_wake() for the actual register setting. + + d) although PXA3xx MFP supports edge detection on each pin, the + internal logic will only wakeup the system when those specific bits + in ADxER registers are set, which can be well mapped to the + corresponding peripheral, thus set_irq_wake() can be called with + the peripheral IRQ to enable the wakeup. + + + MFP on PXA3xx +=============== + +Every external I/O pad on PXA3xx (excluding those for special purpose) has +one MFP logic associated, and is controlled by one MFP register (MFPR). + +The MFPR has the following bit definitions (for PXA300/PXA310/PXA320): + + 31 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ + | RESERVED |PS|PU|PD| DRIVE |SS|SD|SO|EC|EF|ER|--| AF_SEL | + +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ + + Bit 3: RESERVED + Bit 4: EDGE_RISE_EN - enable detection of rising edge on this pin + Bit 5: EDGE_FALL_EN - enable detection of falling edge on this pin + Bit 6: EDGE_CLEAR - disable edge detection on this pin + Bit 7: SLEEP_OE_N - enable outputs during low power modes + Bit 8: SLEEP_DATA - output data on the pin during low power modes + Bit 9: SLEEP_SEL - selection control for low power modes signals + Bit 13: PULLDOWN_EN - enable the internal pull-down resistor on this pin + Bit 14: PULLUP_EN - enable the internal pull-up resistor on this pin + Bit 15: PULL_SEL - pull state controlled by selected alternate function + (0) or by PULL{UP,DOWN}_EN bits (1) + + Bit 0 - 2: AF_SEL - alternate function selection, 8 possibilities, from 0-7 + Bit 10-12: DRIVE - drive strength and slew rate + 0b000 - fast 1mA + 0b001 - fast 2mA + 0b002 - fast 3mA + 0b003 - fast 4mA + 0b004 - slow 6mA + 0b005 - fast 6mA + 0b006 - slow 10mA + 0b007 - fast 10mA + + MFP Design for PXA2xx/PXA3xx +============================== + +Due to the difference of pin-mux handling between PXA2xx and PXA3xx, a unified +MFP API is introduced to cover both series of processors. + +The basic idea of this design is to introduce definitions for all possible pin +configurations, these definitions are processor and platform independent, and +the actual API invoked to convert these definitions into register settings and +make them effective there-after. + + Files Involved + -------------- + + - arch/arm/mach-pxa/include/mach/mfp.h + + for + 1. Unified pin definitions - enum constants for all configurable pins + 2. processor-neutral bit definitions for a possible MFP configuration + + - arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h + + for PXA3xx specific MFPR register bit definitions and PXA3xx common pin + configurations + + - arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h + + for PXA2xx specific definitions and PXA25x/PXA27x common pin configurations + + - arch/arm/mach-pxa/include/mach/mfp-pxa25x.h + arch/arm/mach-pxa/include/mach/mfp-pxa27x.h + arch/arm/mach-pxa/include/mach/mfp-pxa300.h + arch/arm/mach-pxa/include/mach/mfp-pxa320.h + arch/arm/mach-pxa/include/mach/mfp-pxa930.h + + for processor specific definitions + + - arch/arm/mach-pxa/mfp-pxa3xx.c + - arch/arm/mach-pxa/mfp-pxa2xx.c + + for implementation of the pin configuration to take effect for the actual + processor. + + Pin Configuration + ----------------- + + The following comments are copied from mfp.h (see the actual source code + for most updated info) + + /* + * a possible MFP configuration is represented by a 32-bit integer + * + * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) + * bit 10..12 - Alternate Function Selection + * bit 13..15 - Drive Strength + * bit 16..18 - Low Power Mode State + * bit 19..20 - Low Power Mode Edge Detection + * bit 21..22 - Run Mode Pull State + * + * to facilitate the definition, the following macros are provided + * + * MFP_CFG_DEFAULT - default MFP configuration value, with + * alternate function = 0, + * drive strength = fast 3mA (MFP_DS03X) + * low power mode = default + * edge detection = none + * + * MFP_CFG - default MFPR value with alternate function + * MFP_CFG_DRV - default MFPR value with alternate function and + * pin drive strength + * MFP_CFG_LPM - default MFPR value with alternate function and + * low power mode + * MFP_CFG_X - default MFPR value with alternate function, + * pin drive strength and low power mode + */ + + Examples of pin configurations are: + + #define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT) + + which reads GPIO94 can be configured as SSP3_RXD, with alternate function + selection of 1, driving strength of 0b101, and a float state in low power + modes. + + NOTE: this is the default setting of this pin being configured as SSP3_RXD + which can be modified a bit in board code, though it is not recommended to + do so, simply because this default setting is usually carefully encoded, + and is supposed to work in most cases. + + Register Settings + ----------------- + + Register settings on PXA3xx for a pin configuration is actually very + straight-forward, most bits can be converted directly into MFPR value + in a easier way. Two sets of MFPR values are calculated: the run-time + ones and the low power mode ones, to allow different settings. + + The conversion from a generic pin configuration to the actual register + settings on PXA2xx is a bit complicated: many registers are involved, + including GAFRx, GPDRx, PGSRx, PWER, PKWR, PFER and PRER. Please see + mfp-pxa2xx.c for how the conversion is made. -- cgit v1.2.3 From 77e196752bdd76a0c58ab082658d28c6a90fa40e Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 16 Dec 2008 11:54:34 +0800 Subject: [ARM] pxafb: allow video memory size to be configurable The amount of video memory size is decided according to the following order: 1. x x by default, which is the backward compatible way 2. size specified in platform data 3. size specified in module parameter 'options' string or specified in kernel boot command line (see updated Documentation/fb/pxafb.txt) And now since the memory is allocated from system memory, the pxafb_mmap can be removed and the default fb_mmap() should be working all right. Also, since we now have introduced the 'struct pxafb_dma_buff' for DMA descriptors and palettes, the allocation can be separated cleanly. NOTE: the LCD DMA actually supports chained transfer (i.e. page-based transfers), to simplify the logic and keep the performance (with less TLB misses when accessing from memory mapped user space), the memory is allocated by alloc_pages_*() to ensures it's physical contiguous. Signed-off-by: Eric Miao Signed-off-by: Eric Miao --- Documentation/fb/pxafb.txt | 8 +- arch/arm/mach-pxa/include/mach/pxafb.h | 1 + drivers/video/pxafb.c | 131 ++++++++++++++------------------- drivers/video/pxafb.h | 17 +---- 4 files changed, 65 insertions(+), 92 deletions(-) (limited to 'Documentation') diff --git a/Documentation/fb/pxafb.txt b/Documentation/fb/pxafb.txt index db9b8500b43b..ad94b5ca0095 100644 --- a/Documentation/fb/pxafb.txt +++ b/Documentation/fb/pxafb.txt @@ -5,9 +5,13 @@ The driver supports the following options, either via options= when modular or video=pxafb: when built in. For example: - modprobe pxafb options=mode:640x480-8,passive + modprobe pxafb options=vmem:2M,mode:640x480-8,passive or on the kernel command line - video=pxafb:mode:640x480-8,passive + video=pxafb:vmem:2M,mode:640x480-8,passive + +vmem: VIDEO_MEM_SIZE + Amount of video memory to allocate (can be suffixed with K or M + for kilobytes or megabytes) mode:XRESxYRES[-BPP] XRES == LCCR1_PPL + 1 diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index 4201a889ff4e..6932720ba04e 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -113,6 +113,7 @@ struct pxafb_mach_info { unsigned int num_modes; unsigned int lcd_conn; + unsigned long video_mem_size; u_int fixed_modes:1, cmap_inverse:1, diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index ab689597f259..25bf4b8b6b53 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -72,6 +72,8 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *); static void set_ctrlr_state(struct pxafb_info *fbi, u_int state); +static unsigned long video_mem_size = 0; + static inline unsigned long lcd_readl(struct pxafb_info *fbi, unsigned int off) { @@ -498,20 +500,6 @@ static int pxafb_blank(int blank, struct fb_info *info) return 0; } -static int pxafb_mmap(struct fb_info *info, - struct vm_area_struct *vma) -{ - struct pxafb_info *fbi = (struct pxafb_info *)info; - unsigned long off = vma->vm_pgoff << PAGE_SHIFT; - - if (off < info->fix.smem_len) { - vma->vm_pgoff += fbi->video_offset / PAGE_SIZE; - return dma_mmap_writecombine(fbi->dev, vma, fbi->map_cpu, - fbi->map_dma, fbi->map_size); - } - return -EINVAL; -} - static struct fb_ops pxafb_ops = { .owner = THIS_MODULE, .fb_check_var = pxafb_check_var, @@ -521,7 +509,6 @@ static struct fb_ops pxafb_ops = { .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, .fb_blank = pxafb_blank, - .fb_mmap = pxafb_mmap, }; /* @@ -614,7 +601,7 @@ static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal, dma_desc = &fbi->dma_buff->dma_desc[dma]; dma_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[dma]); - dma_desc->fsadr = fbi->screen_dma + offset; + dma_desc->fsadr = fbi->video_mem_phys + offset; dma_desc->fidr = 0; dma_desc->ldcmd = size; @@ -1267,69 +1254,30 @@ static int pxafb_resume(struct platform_device *dev) #define pxafb_resume NULL #endif -/* - * pxafb_map_video_memory(): - * Allocates the DRAM memory for the frame buffer. This buffer is - * remapped into a non-cached, non-buffered, memory region to - * allow palette and pixel writes to occur without flushing the - * cache. Once this area is remapped, all virtual memory - * access to the video memory should occur at the new region. - */ -static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi) +static int __devinit pxafb_init_video_memory(struct pxafb_info *fbi) { - /* - * We reserve one page for the palette, plus the size - * of the framebuffer. - */ - fbi->video_offset = PAGE_ALIGN(sizeof(struct pxafb_dma_buff)); - fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + fbi->video_offset); - fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size, - &fbi->map_dma, GFP_KERNEL); - - if (fbi->map_cpu) { - /* prevent initial garbage on screen */ - memset(fbi->map_cpu, 0, fbi->map_size); - fbi->fb.screen_base = fbi->map_cpu + fbi->video_offset; - fbi->screen_dma = fbi->map_dma + fbi->video_offset; - - /* - * FIXME: this is actually the wrong thing to place in - * smem_start. But fbdev suffers from the problem that - * it needs an API which doesn't exist (in this case, - * dma_writecombine_mmap) - */ - fbi->fb.fix.smem_start = fbi->screen_dma; - fbi->palette_size = fbi->fb.var.bits_per_pixel == 8 ? 256 : 16; - - fbi->dma_buff = (void *) fbi->map_cpu; - fbi->dma_buff_phys = fbi->map_dma; - fbi->palette_cpu = (u16 *) fbi->dma_buff->palette; + int size = PAGE_ALIGN(fbi->video_mem_size); - pr_debug("pxafb: palette_mem_size = 0x%08x\n", fbi->palette_size*sizeof(u16)); - } - - return fbi->map_cpu ? 0 : -ENOMEM; -} + fbi->video_mem = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO); + if (fbi->video_mem == NULL) + return -ENOMEM; -static void pxafb_decode_mode_info(struct pxafb_info *fbi, - struct pxafb_mode_info *modes, - unsigned int num_modes) -{ - unsigned int i, smemlen; + fbi->video_mem_phys = virt_to_phys(fbi->video_mem); + fbi->video_mem_size = size; - pxafb_setmode(&fbi->fb.var, &modes[0]); + fbi->fb.fix.smem_start = fbi->video_mem_phys; + fbi->fb.fix.smem_len = fbi->video_mem_size; + fbi->fb.screen_base = fbi->video_mem; - for (i = 0; i < num_modes; i++) { - smemlen = modes[i].xres * modes[i].yres * modes[i].bpp / 8; - if (smemlen > fbi->fb.fix.smem_len) - fbi->fb.fix.smem_len = smemlen; - } + return fbi->video_mem ? 0 : -ENOMEM; } static void pxafb_decode_mach_info(struct pxafb_info *fbi, struct pxafb_mach_info *inf) { unsigned int lcd_conn = inf->lcd_conn; + struct pxafb_mode_info *m; + int i; fbi->cmap_inverse = inf->cmap_inverse; fbi->cmap_static = inf->cmap_static; @@ -1371,7 +1319,22 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi, fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL) ? LCCR3_PCP : 0; decode_mode: - pxafb_decode_mode_info(fbi, inf->modes, inf->num_modes); + pxafb_setmode(&fbi->fb.var, &inf->modes[0]); + + /* decide video memory size as follows: + * 1. default to mode of maximum resolution + * 2. allow platform to override + * 3. allow module parameter to override + */ + for (i = 0, m = &inf->modes[0]; i < inf->num_modes; i++, m++) + fbi->video_mem_size = max_t(size_t, fbi->video_mem_size, + m->xres * m->yres * m->bpp / 8); + + if (inf->video_mem_size > fbi->video_mem_size) + fbi->video_mem_size = inf->video_mem_size; + + if (video_mem_size > fbi->video_mem_size) + fbi->video_mem_size = video_mem_size; } static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev) @@ -1499,7 +1462,9 @@ static int __devinit parse_opt(struct device *dev, char *this_opt) s[0] = '\0'; - if (!strncmp(this_opt, "mode:", 5)) { + if (!strncmp(this_opt, "vmem:", 5)) { + video_mem_size = memparse(this_opt + 5, NULL); + } else if (!strncmp(this_opt, "mode:", 5)) { return parse_opt_mode(dev, this_opt); } else if (!strncmp(this_opt, "pixclock:", 9)) { mode->pixclock = simple_strtoul(this_opt+9, NULL, 0); @@ -1736,12 +1701,20 @@ static int __devinit pxafb_probe(struct platform_device *dev) goto failed_free_res; } - /* Initialize video memory */ - ret = pxafb_map_video_memory(fbi); + fbi->dma_buff_size = PAGE_ALIGN(sizeof(struct pxafb_dma_buff)); + fbi->dma_buff = dma_alloc_coherent(fbi->dev, fbi->dma_buff_size, + &fbi->dma_buff_phys, GFP_KERNEL); + if (fbi->dma_buff == NULL) { + dev_err(&dev->dev, "failed to allocate memory for DMA\n"); + ret = -ENOMEM; + goto failed_free_io; + } + + ret = pxafb_init_video_memory(fbi); if (ret) { dev_err(&dev->dev, "Failed to allocate video RAM: %d\n", ret); ret = -ENOMEM; - goto failed_free_io; + goto failed_free_dma; } irq = platform_get_irq(dev, 0); @@ -1811,8 +1784,10 @@ failed_free_cmap: failed_free_irq: free_irq(irq, fbi); failed_free_mem: - dma_free_writecombine(&dev->dev, fbi->map_size, - fbi->map_cpu, fbi->map_dma); + free_pages_exact(fbi->video_mem, fbi->video_mem_size); +failed_free_dma: + dma_free_coherent(&dev->dev, fbi->dma_buff_size, + fbi->dma_buff, fbi->dma_buff_phys); failed_free_io: iounmap(fbi->mmio_base); failed_free_res: @@ -1847,8 +1822,10 @@ static int __devexit pxafb_remove(struct platform_device *dev) irq = platform_get_irq(dev, 0); free_irq(irq, fbi); - dma_free_writecombine(&dev->dev, fbi->map_size, - fbi->map_cpu, fbi->map_dma); + free_pages_exact(fbi->video_mem, fbi->video_mem_size); + + dma_free_writecombine(&dev->dev, fbi->dma_buff_size, + fbi->dma_buff, fbi->dma_buff_phys); iounmap(fbi->mmio_base); diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h index d8eb93fa03a3..0981938682ef 100644 --- a/drivers/video/pxafb.h +++ b/drivers/video/pxafb.h @@ -69,24 +69,15 @@ struct pxafb_info { void __iomem *mmio_base; struct pxafb_dma_buff *dma_buff; + size_t dma_buff_size; dma_addr_t dma_buff_phys; dma_addr_t fdadr[DMA_MAX]; - /* - * These are the addresses we mapped - * the framebuffer memory region to. - */ - /* raw memory addresses */ - dma_addr_t map_dma; /* physical */ - u_char * map_cpu; /* virtual */ - u_int map_size; - - /* addresses of pieces placed in raw buffer */ - u_char * screen_cpu; /* virtual address of frame buffer */ - dma_addr_t screen_dma; /* physical address of frame buffer */ + void __iomem *video_mem; /* virtual address of frame buffer */ + unsigned long video_mem_phys; /* physical address of frame buffer */ + size_t video_mem_size; /* size of the frame buffer */ u16 * palette_cpu; /* virtual address of palette memory */ u_int palette_size; - ssize_t video_offset; u_int lccr0; u_int lccr3; -- cgit v1.2.3 From 198fc108ee4c2cd3f08954eae6a819c81c03214b Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 23 Dec 2008 17:49:43 +0800 Subject: [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices PXA27x and later processors support overlay1 and overlay2 on-top of the base framebuffer (although under-neath the base is also possible). They support palette and no-palette RGB formats, as well as YUV formats (only available on overlay2). These overlays have dedicated DMA channels and behave in a similar way as a framebuffer. This heavily simplified and re-structured work is based on the original pxafb_overlay.c (which is pending for mainline merge for a long time). The major problems with this pxafb_overlay.c are (if you are interested in the history): 1. heavily redundant (the control logics for overlay1 and overlay2 are actually identical except for some small operations, which are now abstracted into a 'pxafb_layer_ops' structure) 2. a lot of useless and un-tested code (two workarounds which are now fixed on mature silicons) 3. cursorfb is actually useless, hardware cursor should not be used this way, and the code was actually un-tested for a long time. The code in this patch should be self-explanatory, I tried to add minimum comments. As said, this is basically simplified, there are several things still on the pending list: 1. palette mode is un-supported and un-tested (although re-using the palette code of the base framebuffer is actually very easy now with previous clean-up patches) 2. fb_pan_display for overlay(s) is un-supported 3. the base framebuffer can actually be abstracted by 'pxafb_layer' as well, which will help further re-use of the code and keep a better and consistent structure. (This is the reason I named it 'pxafb_layer' instead of 'pxafb_overlay' or something alike) See Documentation/fb/pxafb.txt for additional usage information. Signed-off-by: Eric Miao Cc: Rodolfo Giometti Signed-off-by: Eric Miao --- Documentation/fb/pxafb.txt | 84 +++++++ arch/arm/mach-pxa/include/mach/regs-lcd.h | 34 ++- drivers/video/Kconfig | 5 + drivers/video/pxafb.c | 364 +++++++++++++++++++++++++++++- drivers/video/pxafb.h | 45 ++++ 5 files changed, 516 insertions(+), 16 deletions(-) (limited to 'Documentation') diff --git a/Documentation/fb/pxafb.txt b/Documentation/fb/pxafb.txt index ad94b5ca0095..d143a0a749f9 100644 --- a/Documentation/fb/pxafb.txt +++ b/Documentation/fb/pxafb.txt @@ -56,3 +56,87 @@ outputen:POLARITY pixclockpol:POLARITY pixel clock polarity 0 => falling edge, 1 => rising edge + + +Overlay Support for PXA27x and later LCD controllers +==================================================== + + PXA27x and later processors support overlay1 and overlay2 on-top of the + base framebuffer (although under-neath the base is also possible). They + support palette and no-palette RGB formats, as well as YUV formats (only + available on overlay2). These overlays have dedicated DMA channels and + behave in a similar way as a framebuffer. + + However, there are some differences between these overlay framebuffers + and normal framebuffers, as listed below: + + 1. overlay can start at a 32-bit word aligned position within the base + framebuffer, which means they have a start (x, y). This information + is encoded into var->nonstd (no, var->xoffset and var->yoffset are + not for such purpose). + + 2. overlay framebuffer is allocated dynamically according to specified + 'struct fb_var_screeninfo', the amount is decided by: + + var->xres_virtual * var->yres_virtual * bpp + + bpp = 16 -- for RGB565 or RGBT555 + = 24 -- for YUV444 packed + = 24 -- for YUV444 planar + = 16 -- for YUV422 planar (1 pixel = 1 Y + 1/2 Cb + 1/2 Cr) + = 12 -- for YUV420 planar (1 pixel = 1 Y + 1/4 Cb + 1/4 Cr) + + NOTE: + + a. overlay does not support panning in x-direction, thus + var->xres_virtual will always be equal to var->xres + + b. line length of overlay(s) must be on a 32-bit word boundary, + for YUV planar modes, it is a requirement for the component + with minimum bits per pixel, e.g. for YUV420, Cr component + for one pixel is actually 2-bits, it means the line length + should be a multiple of 16-pixels + + c. starting horizontal position (XPOS) should start on a 32-bit + word boundary, otherwise the fb_check_var() will just fail. + + d. the rectangle of the overlay should be within the base plane, + otherwise fail + + Applications should follow the sequence below to operate an overlay + framebuffer: + + a. open("/dev/fb[1-2]", ...) + b. ioctl(fd, FBIOGET_VSCREENINFO, ...) + c. modify 'var' with desired parameters: + 1) var->xres and var->yres + 2) larger var->yres_virtual if more memory is required, + usually for double-buffering + 3) var->nonstd for starting (x, y) and color format + 4) var->{red, green, blue, transp} if RGB mode is to be used + d. ioctl(fd, FBIOPUT_VSCREENINFO, ...) + e. ioctl(fd, FBIOGET_FSCREENINFO, ...) + f. mmap + g. ... + + 3. for YUV planar formats, these are actually not supported within the + framebuffer framework, application has to take care of the offsets + and lengths of each component within the framebuffer. + + 4. var->nonstd is used to pass starting (x, y) position and color format, + the detailed bit fields are shown below: + + 31 23 20 10 0 + +-----------------+---+----------+----------+ + | ... unused ... |FOR| XPOS | YPOS | + +-----------------+---+----------+----------+ + + FOR - color format, as defined by OVERLAY_FORMAT_* in pxafb.h + 0 - RGB + 1 - YUV444 PACKED + 2 - YUV444 PLANAR + 3 - YUV422 PLANAR + 4 - YUR420 PLANAR + + XPOS - starting horizontal position + YPOS - starting vertical position diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h index aff3b876a7bf..f82dcea792d9 100644 --- a/arch/arm/mach-pxa/include/mach/regs-lcd.h +++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h @@ -12,7 +12,8 @@ #define LCCR3 (0x00C) /* LCD Controller Control Register 3 */ #define LCCR4 (0x010) /* LCD Controller Control Register 4 */ #define LCCR5 (0x014) /* LCD Controller Control Register 5 */ -#define LCSR (0x038) /* LCD Controller Status Register */ +#define LCSR (0x038) /* LCD Controller Status Register 0 */ +#define LCSR1 (0x034) /* LCD Controller Status Register 1 */ #define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */ #define TMEDRGBR (0x040) /* TMED RGB Seed Register */ #define TMEDCR (0x044) /* TMED Control Register */ @@ -25,6 +26,11 @@ #define FBR5 (0x110) /* DMA Channel 2 Frame Branch Register */ #define FBR6 (0x114) /* DMA Channel 2 Frame Branch Register */ +#define OVL1C1 (0x050) /* Overlay 1 Control Register 1 */ +#define OVL1C2 (0x060) /* Overlay 1 Control Register 2 */ +#define OVL2C1 (0x070) /* Overlay 2 Control Register 1 */ +#define OVL2C2 (0x080) /* Overlay 2 Control Register 2 */ + #define CMDCR (0x100) /* Command Control Register */ #define PRSR (0x104) /* Panel Read Status Register */ @@ -42,16 +48,12 @@ #define LCCR4_PAL_FOR_MASK (3 << 15) #define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */ -#define FSADR0 (0x204) /* DMA Channel 0 Frame Source Address Register */ -#define FIDR0 (0x208) /* DMA Channel 0 Frame ID Register */ -#define LDCMD0 (0x20C) /* DMA Channel 0 Command Register */ #define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */ -#define FSADR1 (0x214) /* DMA Channel 1 Frame Source Address Register */ -#define FIDR1 (0x218) /* DMA Channel 1 Frame ID Register */ -#define LDCMD1 (0x21C) /* DMA Channel 1 Command Register */ +#define FDADR2 (0x220) /* DMA Channel 2 Frame Descriptor Address Register */ +#define FDADR3 (0x230) /* DMA Channel 3 Frame Descriptor Address Register */ +#define FDADR4 (0x240) /* DMA Channel 4 Frame Descriptor Address Register */ +#define FDADR5 (0x250) /* DMA Channel 5 Frame Descriptor Address Register */ #define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */ -#define FSADR6 (0x264) /* DMA Channel 6 Frame Source Address Register */ -#define FIDR6 (0x268) /* DMA Channel 6 Frame ID Register */ #define LCCR0_ENB (1 << 0) /* LCD Controller enable */ #define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */ @@ -151,8 +153,22 @@ #define LCSR_RD_ST (1 << 11) /* read status */ #define LCSR_CMD_INT (1 << 12) /* command interrupt */ +#define LCSR1_IU(x) (1 << ((x) + 23)) /* Input FIFO underrun */ +#define LCSR1_BS(x) (1 << ((x) + 15)) /* Branch Status */ +#define LCSR1_EOF(x) (1 << ((x) + 7)) /* End of Frame Status */ +#define LCSR1_SOF(x) (1 << ((x) - 1)) /* Start of Frame Status */ + #define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ +/* overlay control registers */ +#define OVLxC1_PPL(x) ((((x) - 1) & 0x3ff) << 0) /* Pixels Per Line */ +#define OVLxC1_LPO(x) ((((x) - 1) & 0x3ff) << 10) /* Number of Lines */ +#define OVLxC1_BPP(x) (((x) & 0xf) << 20) /* Bits Per Pixel */ +#define OVLxC1_OEN (1 << 31) /* Enable bit for Overlay */ +#define OVLxC2_XPOS(x) (((x) & 0x3ff) << 0) /* Horizontal Position */ +#define OVLxC2_YPOS(x) (((x) & 0x3ff) << 10) /* Vertical Position */ +#define OVL2C2_PFOR(x) (((x) & 0x7) << 20) /* Pixel Format */ + /* smartpanel related */ #define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */ #define PRSR_A0 (1 << 8) /* Read Data Source */ diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 3f3ce13fef43..486d81ca02a3 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1817,6 +1817,11 @@ config FB_PXA If unsure, say N. +config FB_PXA_OVERLAY + bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer" + default n + depends on FB_PXA && (PXA27x || PXA3xx) + config FB_PXA_SMARTPANEL bool "PXA Smartpanel LCD support" default n diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 7935706a7565..3a41ea10e8ec 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -20,6 +20,16 @@ * * linux-arm-kernel@lists.arm.linux.org.uk * + * Add support for overlay1 and overlay2 based on pxafb_overlay.c: + * + * Copyright (C) 2004, Intel Corporation + * + * 2003/08/27: + * 2004/03/10: + * 2004/10/28: + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * All Rights Reserved */ #include @@ -72,6 +82,8 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *); static void set_ctrlr_state(struct pxafb_info *fbi, u_int state); static void setup_base_frame(struct pxafb_info *fbi, int branch); +static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal, + unsigned long offset, size_t size); static unsigned long video_mem_size = 0; @@ -581,6 +593,330 @@ static struct fb_ops pxafb_ops = { .fb_blank = pxafb_blank, }; +#ifdef CONFIG_FB_PXA_OVERLAY +static void overlay1fb_setup(struct pxafb_layer *ofb) +{ + int size = ofb->fb.fix.line_length * ofb->fb.var.yres_virtual; + unsigned long start = ofb->video_mem_phys; + setup_frame_dma(ofb->fbi, DMA_OV1, PAL_NONE, start, size); +} + +/* Depending on the enable status of overlay1/2, the DMA should be + * updated from FDADRx (when disabled) or FBRx (when enabled). + */ +static void overlay1fb_enable(struct pxafb_layer *ofb) +{ + int enabled = lcd_readl(ofb->fbi, OVL1C1) & OVLxC1_OEN; + uint32_t fdadr1 = ofb->fbi->fdadr[DMA_OV1] | (enabled ? 0x1 : 0); + + lcd_writel(ofb->fbi, enabled ? FBR1 : FDADR1, fdadr1); + lcd_writel(ofb->fbi, OVL1C2, ofb->control[1]); + lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] | OVLxC1_OEN); +} + +static void overlay1fb_disable(struct pxafb_layer *ofb) +{ + uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5); + + lcd_writel(ofb->fbi, OVL1C1, ofb->control[0] & ~OVLxC1_OEN); + + lcd_writel(ofb->fbi, LCSR1, LCSR1_BS(1)); + lcd_writel(ofb->fbi, LCCR5, lccr5 & ~LCSR1_BS(1)); + lcd_writel(ofb->fbi, FBR1, ofb->fbi->fdadr[DMA_OV1] | 0x3); + + if (wait_for_completion_timeout(&ofb->branch_done, 1 * HZ) == 0) + pr_warning("%s: timeout disabling overlay1\n", __func__); + + lcd_writel(ofb->fbi, LCCR5, lccr5); +} + +static void overlay2fb_setup(struct pxafb_layer *ofb) +{ + int size, div = 1, pfor = NONSTD_TO_PFOR(ofb->fb.var.nonstd); + unsigned long start[3] = { ofb->video_mem_phys, 0, 0 }; + + if (pfor == OVERLAY_FORMAT_RGB || pfor == OVERLAY_FORMAT_YUV444_PACKED) { + size = ofb->fb.fix.line_length * ofb->fb.var.yres_virtual; + setup_frame_dma(ofb->fbi, DMA_OV2_Y, -1, start[0], size); + } else { + size = ofb->fb.var.xres_virtual * ofb->fb.var.yres_virtual; + switch (pfor) { + case OVERLAY_FORMAT_YUV444_PLANAR: div = 1; break; + case OVERLAY_FORMAT_YUV422_PLANAR: div = 2; break; + case OVERLAY_FORMAT_YUV420_PLANAR: div = 4; break; + } + start[1] = start[0] + size; + start[2] = start[1] + size / div; + setup_frame_dma(ofb->fbi, DMA_OV2_Y, -1, start[0], size); + setup_frame_dma(ofb->fbi, DMA_OV2_Cb, -1, start[1], size / div); + setup_frame_dma(ofb->fbi, DMA_OV2_Cr, -1, start[2], size / div); + } +} + +static void overlay2fb_enable(struct pxafb_layer *ofb) +{ + int pfor = NONSTD_TO_PFOR(ofb->fb.var.nonstd); + int enabled = lcd_readl(ofb->fbi, OVL2C1) & OVLxC1_OEN; + uint32_t fdadr2 = ofb->fbi->fdadr[DMA_OV2_Y] | (enabled ? 0x1 : 0); + uint32_t fdadr3 = ofb->fbi->fdadr[DMA_OV2_Cb] | (enabled ? 0x1 : 0); + uint32_t fdadr4 = ofb->fbi->fdadr[DMA_OV2_Cr] | (enabled ? 0x1 : 0); + + if (pfor == OVERLAY_FORMAT_RGB || pfor == OVERLAY_FORMAT_YUV444_PACKED) + lcd_writel(ofb->fbi, enabled ? FBR2 : FDADR2, fdadr2); + else { + lcd_writel(ofb->fbi, enabled ? FBR2 : FDADR2, fdadr2); + lcd_writel(ofb->fbi, enabled ? FBR3 : FDADR3, fdadr3); + lcd_writel(ofb->fbi, enabled ? FBR4 : FDADR4, fdadr4); + } + lcd_writel(ofb->fbi, OVL2C2, ofb->control[1]); + lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] | OVLxC1_OEN); +} + +static void overlay2fb_disable(struct pxafb_layer *ofb) +{ + uint32_t lccr5 = lcd_readl(ofb->fbi, LCCR5); + + lcd_writel(ofb->fbi, OVL2C1, ofb->control[0] & ~OVLxC1_OEN); + + lcd_writel(ofb->fbi, LCSR1, LCSR1_BS(2)); + lcd_writel(ofb->fbi, LCCR5, lccr5 & ~LCSR1_BS(2)); + lcd_writel(ofb->fbi, FBR2, ofb->fbi->fdadr[DMA_OV2_Y] | 0x3); + lcd_writel(ofb->fbi, FBR3, ofb->fbi->fdadr[DMA_OV2_Cb] | 0x3); + lcd_writel(ofb->fbi, FBR4, ofb->fbi->fdadr[DMA_OV2_Cr] | 0x3); + + if (wait_for_completion_timeout(&ofb->branch_done, 1 * HZ) == 0) + pr_warning("%s: timeout disabling overlay2\n", __func__); +} + +static struct pxafb_layer_ops ofb_ops[] = { + [0] = { + .enable = overlay1fb_enable, + .disable = overlay1fb_disable, + .setup = overlay1fb_setup, + }, + [1] = { + .enable = overlay2fb_enable, + .disable = overlay2fb_disable, + .setup = overlay2fb_setup, + }, +}; + +static int overlayfb_open(struct fb_info *info, int user) +{ + struct pxafb_layer *ofb = (struct pxafb_layer *)info; + + /* no support for framebuffer console on overlay */ + if (user == 0) + return -ENODEV; + + /* allow only one user at a time */ + if (atomic_inc_and_test(&ofb->usage)) + return -EBUSY; + + /* unblank the base framebuffer */ + fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK); + return 0; +} + +static int overlayfb_release(struct fb_info *info, int user) +{ + struct pxafb_layer *ofb = (struct pxafb_layer*) info; + + atomic_dec(&ofb->usage); + ofb->ops->disable(ofb); + + free_pages_exact(ofb->video_mem, ofb->video_mem_size); + ofb->video_mem = NULL; + ofb->video_mem_size = 0; + return 0; +} + +static int overlayfb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct pxafb_layer *ofb = (struct pxafb_layer *)info; + struct fb_var_screeninfo *base_var = &ofb->fbi->fb.var; + int xpos, ypos, pfor, bpp; + + xpos = NONSTD_TO_XPOS(var->nonstd); + ypos = NONSTD_TO_XPOS(var->nonstd); + pfor = NONSTD_TO_PFOR(var->nonstd); + + bpp = pxafb_var_to_bpp(var); + if (bpp < 0) + return -EINVAL; + + /* no support for YUV format on overlay1 */ + if (ofb->id == OVERLAY1 && pfor != 0) + return -EINVAL; + + /* for YUV packed formats, bpp = 'minimum bpp of YUV components' */ + switch (pfor) { + case OVERLAY_FORMAT_RGB: + bpp = pxafb_var_to_bpp(var); + if (bpp < 0) + return -EINVAL; + + pxafb_set_pixfmt(var, var_to_depth(var)); + break; + case OVERLAY_FORMAT_YUV444_PACKED: bpp = 24; break; + case OVERLAY_FORMAT_YUV444_PLANAR: bpp = 8; break; + case OVERLAY_FORMAT_YUV422_PLANAR: bpp = 4; break; + case OVERLAY_FORMAT_YUV420_PLANAR: bpp = 2; break; + default: + return -EINVAL; + } + + /* each line must start at a 32-bit word boundary */ + if ((xpos * bpp) % 32) + return -EINVAL; + + /* xres must align on 32-bit word boundary */ + var->xres = roundup(var->xres * bpp, 32) / bpp; + + if ((xpos + var->xres > base_var->xres) || + (ypos + var->yres > base_var->yres)) + return -EINVAL; + + var->xres_virtual = var->xres; + var->yres_virtual = max(var->yres, var->yres_virtual); + return 0; +} + +static int overlayfb_map_video_memory(struct pxafb_layer *ofb) +{ + struct fb_var_screeninfo *var = &ofb->fb.var; + int pfor = NONSTD_TO_PFOR(var->nonstd); + int size, bpp = 0; + + switch (pfor) { + case OVERLAY_FORMAT_RGB: bpp = var->bits_per_pixel; break; + case OVERLAY_FORMAT_YUV444_PACKED: bpp = 24; break; + case OVERLAY_FORMAT_YUV444_PLANAR: bpp = 24; break; + case OVERLAY_FORMAT_YUV422_PLANAR: bpp = 16; break; + case OVERLAY_FORMAT_YUV420_PLANAR: bpp = 12; break; + } + + ofb->fb.fix.line_length = var->xres_virtual * bpp / 8; + + size = PAGE_ALIGN(ofb->fb.fix.line_length * var->yres_virtual); + + /* don't re-allocate if the original video memory is enough */ + if (ofb->video_mem) { + if (ofb->video_mem_size >= size) + return 0; + + free_pages_exact(ofb->video_mem, ofb->video_mem_size); + } + + ofb->video_mem = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO); + if (ofb->video_mem == NULL) + return -ENOMEM; + + ofb->video_mem_phys = virt_to_phys(ofb->video_mem); + ofb->video_mem_size = size; + + ofb->fb.fix.smem_start = ofb->video_mem_phys; + ofb->fb.fix.smem_len = ofb->fb.fix.line_length * var->yres_virtual; + ofb->fb.screen_base = ofb->video_mem; + return 0; +} + +static int overlayfb_set_par(struct fb_info *info) +{ + struct pxafb_layer *ofb = (struct pxafb_layer *)info; + struct fb_var_screeninfo *var = &info->var; + int xpos, ypos, pfor, bpp, ret; + + ret = overlayfb_map_video_memory(ofb); + if (ret) + return ret; + + bpp = pxafb_var_to_bpp(var); + xpos = NONSTD_TO_XPOS(var->nonstd); + ypos = NONSTD_TO_XPOS(var->nonstd); + pfor = NONSTD_TO_PFOR(var->nonstd); + + ofb->control[0] = OVLxC1_PPL(var->xres) | OVLxC1_LPO(var->yres) | + OVLxC1_BPP(bpp); + ofb->control[1] = OVLxC2_XPOS(xpos) | OVLxC2_YPOS(ypos); + + if (ofb->id == OVERLAY2) + ofb->control[1] |= OVL2C2_PFOR(pfor); + + ofb->ops->setup(ofb); + ofb->ops->enable(ofb); + return 0; +} + +static struct fb_ops overlay_fb_ops = { + .owner = THIS_MODULE, + .fb_open = overlayfb_open, + .fb_release = overlayfb_release, + .fb_check_var = overlayfb_check_var, + .fb_set_par = overlayfb_set_par, +}; + +static void __devinit init_pxafb_overlay(struct pxafb_info *fbi, + struct pxafb_layer *ofb, int id) +{ + sprintf(ofb->fb.fix.id, "overlay%d", id + 1); + + ofb->fb.fix.type = FB_TYPE_PACKED_PIXELS; + ofb->fb.fix.xpanstep = 0; + ofb->fb.fix.ypanstep = 1; + + ofb->fb.var.activate = FB_ACTIVATE_NOW; + ofb->fb.var.height = -1; + ofb->fb.var.width = -1; + ofb->fb.var.vmode = FB_VMODE_NONINTERLACED; + + ofb->fb.fbops = &overlay_fb_ops; + ofb->fb.flags = FBINFO_FLAG_DEFAULT; + ofb->fb.node = -1; + ofb->fb.pseudo_palette = NULL; + + ofb->id = id; + ofb->ops = &ofb_ops[id]; + atomic_set(&ofb->usage, 0); + ofb->fbi = fbi; + init_completion(&ofb->branch_done); +} + +static int __devinit pxafb_overlay_init(struct pxafb_info *fbi) +{ + int i, ret; + + for (i = 0; i < 2; i++) { + init_pxafb_overlay(fbi, &fbi->overlay[i], i); + ret = register_framebuffer(&fbi->overlay[i].fb); + if (ret) { + dev_err(fbi->dev, "failed to register overlay %d\n", i); + return ret; + } + } + + /* mask all IU/BS/EOF/SOF interrupts */ + lcd_writel(fbi, LCCR5, ~0); + + /* place overlay(s) on top of base */ + fbi->lccr0 |= LCCR0_OUC; + pr_info("PXA Overlay driver loaded successfully!\n"); + return 0; +} + +static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi) +{ + int i; + + for (i = 0; i < 2; i++) + unregister_framebuffer(&fbi->overlay[i].fb); +} +#else +static inline void pxafb_overlay_init(struct pxafb_info *fbi) {} +static inline void pxafb_overlay_exit(struct pxafb_info *fbi) {} +#endif /* CONFIG_FB_PXA_OVERLAY */ + /* * Calculate the PCD value from the clock rate (in picoseconds). * We take account of the PPCR clock setting. @@ -660,7 +996,7 @@ unsigned long pxafb_get_hsync_time(struct device *dev) EXPORT_SYMBOL(pxafb_get_hsync_time); static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal, - unsigned int offset, size_t size) + unsigned long start, size_t size) { struct pxafb_dma_descriptor *dma_desc, *pal_desc; unsigned int dma_desc_off, pal_desc_off; @@ -671,7 +1007,7 @@ static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal, dma_desc = &fbi->dma_buff->dma_desc[dma]; dma_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[dma]); - dma_desc->fsadr = fbi->video_mem_phys + offset; + dma_desc->fsadr = start; dma_desc->fidr = 0; dma_desc->ldcmd = size; @@ -705,14 +1041,14 @@ static void setup_base_frame(struct pxafb_info *fbi, int branch) { struct fb_var_screeninfo *var = &fbi->fb.var; struct fb_fix_screeninfo *fix = &fbi->fb.fix; - unsigned int nbytes, offset; - int dma, pal, bpp = var->bits_per_pixel; + int nbytes, dma, pal, bpp = var->bits_per_pixel; + unsigned long offset; dma = DMA_BASE + (branch ? DMA_MAX : 0); pal = (bpp >= 16) ? PAL_NONE : PAL_BASE + (branch ? PAL_MAX : 0); nbytes = fix->line_length * var->yres; - offset = fix->line_length * var->yoffset; + offset = fix->line_length * var->yoffset + fbi->video_mem_phys; if (fbi->lccr0 & LCCR0_SDS) { nbytes = nbytes / 2; @@ -1090,8 +1426,9 @@ static void pxafb_disable_controller(struct pxafb_info *fbi) static irqreturn_t pxafb_handle_irq(int irq, void *dev_id) { struct pxafb_info *fbi = dev_id; - unsigned int lccr0, lcsr = lcd_readl(fbi, LCSR); + unsigned int lccr0, lcsr, lcsr1; + lcsr = lcd_readl(fbi, LCSR); if (lcsr & LCSR_LDD) { lccr0 = lcd_readl(fbi, LCCR0); lcd_writel(fbi, LCCR0, lccr0 | LCCR0_LDM); @@ -1102,8 +1439,18 @@ static irqreturn_t pxafb_handle_irq(int irq, void *dev_id) if (lcsr & LCSR_CMD_INT) complete(&fbi->command_done); #endif - lcd_writel(fbi, LCSR, lcsr); + +#ifdef CONFIG_FB_PXA_OVERLAY + lcsr1 = lcd_readl(fbi, LCSR1); + if (lcsr1 & LCSR1_BS(1)) + complete(&fbi->overlay[0].branch_done); + + if (lcsr1 & LCSR1_BS(2)) + complete(&fbi->overlay[1].branch_done); + + lcd_writel(fbi, LCSR1, lcsr1); +#endif return IRQ_HANDLED; } @@ -1802,6 +2149,8 @@ static int __devinit pxafb_probe(struct platform_device *dev) goto failed_free_cmap; } + pxafb_overlay_init(fbi); + #ifdef CONFIG_CPU_FREQ fbi->freq_transition.notifier_call = pxafb_freq_transition; fbi->freq_policy.notifier_call = pxafb_freq_policy; @@ -1852,6 +2201,7 @@ static int __devexit pxafb_remove(struct platform_device *dev) info = &fbi->fb; + pxafb_overlay_exit(fbi); unregister_framebuffer(info); pxafb_disable_controller(fbi); diff --git a/drivers/video/pxafb.h b/drivers/video/pxafb.h index ae3cbc1ca64f..2353521c5c8c 100644 --- a/drivers/video/pxafb.h +++ b/drivers/video/pxafb.h @@ -64,6 +64,47 @@ struct pxafb_dma_buff { struct pxafb_dma_descriptor dma_desc[DMA_MAX * 2]; }; +enum { + OVERLAY1, + OVERLAY2, +}; + +enum { + OVERLAY_FORMAT_RGB = 0, + OVERLAY_FORMAT_YUV444_PACKED, + OVERLAY_FORMAT_YUV444_PLANAR, + OVERLAY_FORMAT_YUV422_PLANAR, + OVERLAY_FORMAT_YUV420_PLANAR, +}; + +#define NONSTD_TO_XPOS(x) (((x) >> 0) & 0x3ff) +#define NONSTD_TO_YPOS(x) (((x) >> 10) & 0x3ff) +#define NONSTD_TO_PFOR(x) (((x) >> 20) & 0x7) + +struct pxafb_layer; + +struct pxafb_layer_ops { + void (*enable)(struct pxafb_layer *); + void (*disable)(struct pxafb_layer *); + void (*setup)(struct pxafb_layer *); +}; + +struct pxafb_layer { + struct fb_info fb; + int id; + atomic_t usage; + uint32_t control[2]; + + struct pxafb_layer_ops *ops; + + void __iomem *video_mem; + unsigned long video_mem_phys; + size_t video_mem_size; + struct completion branch_done; + + struct pxafb_info *fbi; +}; + struct pxafb_info { struct fb_info fb; struct device *dev; @@ -114,6 +155,10 @@ struct pxafb_info { struct task_struct *smart_thread; #endif +#ifdef CONFIG_FB_PXA_OVERLAY + struct pxafb_layer overlay[2]; +#endif + #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; struct notifier_block freq_policy; -- cgit v1.2.3 From 2b1b945f88537a110f018f6a50b1f01bbb23fb7e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 24 Oct 2008 23:13:57 -0300 Subject: V4L/DVB (9370): Update README.cx88 with the current status README.cx88 were outdated since a long time. Update it with the current status. Cc: Rafael Diniz Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/README.cx88 | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/README.cx88 b/Documentation/video4linux/README.cx88 index 166d5960b1a9..35fae23f883b 100644 --- a/Documentation/video4linux/README.cx88 +++ b/Documentation/video4linux/README.cx88 @@ -1,4 +1,3 @@ - cx8800 release notes ==================== @@ -10,21 +9,20 @@ current status video - Basically works. - - Some minor image quality glitches. - - For now only capture, overlay support isn't completed yet. + - For now, only capture and read(). Overlay isn't supported. audio - The chip specs for the on-chip TV sound decoder are next to useless :-/ - Neverless the builtin TV sound decoder starts working now, - at least for PAL-BG. Other TV norms need other code ... + at least for some standards. FOR ANY REPORTS ON THIS PLEASE MENTION THE TV NORM YOU ARE USING. - Most tuner chips do provide mono sound, which may or may not be useable depending on the board design. With the Hauppauge cards it works, so there is mono sound available as fallback. - audio data dma (i.e. recording without loopback cable to the - sound card) should be possible, but there is no code yet ... + sound card) is supported via cx88-alsa. vbi - Code present. Works for NTSC closed caption. PAL and other -- cgit v1.2.3 From bc13ae11227b06d2397cea1a8eb22fc2ca64e22f Mon Sep 17 00:00:00 2001 From: Patrice Levesque Date: Sun, 2 Nov 2008 16:37:35 -0300 Subject: V4L/DVB (9529): cx88: add a second PCI ID for ATI TV Wonder Pro There's a second PCI identifier for the ATI TV WONDER PRO card (0x1002:0x00f9). Attached is a patch to kernel 2.6.27 that adds autodetection for this version. Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx88 | 2 +- drivers/media/video/cx88/cx88-cards.c | 6 +++++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index a5227e308f4a..12e600d74247 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -2,7 +2,7 @@ 1 -> Hauppauge WinTV 34xxx models [0070:3400,0070:3401] 2 -> GDI Black Gold [14c7:0106,14c7:0107] 3 -> PixelView [1554:4811] - 4 -> ATI TV Wonder Pro [1002:00f8] + 4 -> ATI TV Wonder Pro [1002:00f8,1002:00f9] 5 -> Leadtek Winfast 2000XP Expert [107d:6611,107d:6613] 6 -> AverTV Studio 303 (M126) [1461:000b] 7 -> MSI TV-@nywhere Master [1462:8606] diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 5bcbb4cc7c2a..3ead9498c4d9 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1897,7 +1897,11 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = PCI_VENDOR_ID_ATI, .subdevice = 0x00f8, .card = CX88_BOARD_ATI_WONDER_PRO, - },{ + }, { + .subvendor = PCI_VENDOR_ID_ATI, + .subdevice = 0x00f9, + .card = CX88_BOARD_ATI_WONDER_PRO, + }, { .subvendor = 0x107d, .subdevice = 0x6611, .card = CX88_BOARD_WINFAST2000XP_EXPERT, -- cgit v1.2.3 From 4b29631db33292d416dc395c56122ea865e7635c Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Sun, 9 Nov 2008 15:25:31 -0300 Subject: V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card The card based on stv0299 or stv0288 demodulators. Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx88 | 2 ++ drivers/media/video/Makefile | 1 + drivers/media/video/cx88/cx88-cards.c | 34 +++++++++++++++++++++++++++++++++ drivers/media/video/cx88/cx88-dvb.c | 2 ++ drivers/media/video/cx88/cx88.h | 2 ++ firmware/Makefile | 16 ++-------------- sound/i2c/other/tea575x-tuner.c | 22 ++++++++++----------- 7 files changed, 54 insertions(+), 25 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 12e600d74247..dc8da94061ac 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -74,3 +74,5 @@ 73 -> TeVii S420 DVB-S [d420:9022] 74 -> Prolink Pixelview Global Extreme [1554:4976] 75 -> PROF 7300 DVB-S/S2 [B033:3033] + 76 -> SATTRADE ST4200 DVB-S/S2 [b200:4200] + 77 -> TBS 8910 DVB-S [8910:8888] diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index e5b801379003..53d43f9e017d 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o +obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o obj-$(CONFIG_VIDEO_SAA5246A) += saa5246a.o diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 3ead9498c4d9..bbe5b3343ac3 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1847,6 +1847,18 @@ static const struct cx88_board cx88_boards[] = { } }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_TBS_8910] = { + .name = "TBS 8910 DVB-S", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, [CX88_BOARD_TBS_8920] = { .name = "TBS 8920 DVB-S/S2", .tuner_type = TUNER_ABSENT, @@ -1871,6 +1883,18 @@ static const struct cx88_board cx88_boards[] = { } }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_SATTRADE_ST4200] = { + .name = "SATTRADE ST4200 DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -2260,6 +2284,10 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0xA044, .subdevice = 0x2011, .card = CX88_BOARD_OMICOM_SS4_PCI, + }, { + .subvendor = 0x8910, + .subdevice = 0x8888, + .card = CX88_BOARD_TBS_8910, }, { .subvendor = 0x8920, .subdevice = 0x8888, @@ -2268,6 +2296,10 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0xB033, .subdevice = 0x3033, .card = CX88_BOARD_PROF_7300, + }, { + .subvendor = 0xb200, + .subdevice = 0x4200, + .card = CX88_BOARD_SATTRADE_ST4200, }, }; @@ -2878,8 +2910,10 @@ static void cx88_card_setup(struct cx88_core *core) case CX88_BOARD_TEVII_S420: case CX88_BOARD_TEVII_S460: case CX88_BOARD_OMICOM_SS4_PCI: + case CX88_BOARD_TBS_8910: case CX88_BOARD_TBS_8920: case CX88_BOARD_PROF_7300: + case CX88_BOARD_SATTRADE_ST4200: cx_write(MO_SRST_IO, 0); msleep(100); cx_write(MO_SRST_IO, 1); diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 8378d46dc80d..bab28112e40e 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -1042,6 +1042,7 @@ static int dvb_register(struct cx8802_dev *dev) 0x08, ISL6421_DCL, 0x00); } break; + case CX88_BOARD_TBS_8910: case CX88_BOARD_TEVII_S420: fe0->dvb.frontend = dvb_attach(stv0299_attach, &tevii_tuner_sharp_config, @@ -1078,6 +1079,7 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_OMICOM_SS4_PCI: case CX88_BOARD_TBS_8920: case CX88_BOARD_PROF_7300: + case CX88_BOARD_SATTRADE_ST4200: fe0->dvb.frontend = dvb_attach(cx24116_attach, &hauppauge_hvr4000_config, &core->i2c_adap); diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index a11599fa1d86..ae1b89a88bcd 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -228,6 +228,8 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_TEVII_S420 73 #define CX88_BOARD_PROLINK_PV_GLOBAL_XTREME 74 #define CX88_BOARD_PROF_7300 75 +#define CX88_BOARD_SATTRADE_ST4200 76 +#define CX88_BOARD_TBS_8910 77 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, diff --git a/firmware/Makefile b/firmware/Makefile index 4993a4b3d8ab..6968388818be 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -150,27 +150,15 @@ $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/% $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %) $(call cmd,ihex) -# Don't depend on ihex2fw if we're installing and it already exists. -# Putting it after | in the dependencies doesn't seem sufficient when -# we're installing after a cross-compile, because ihex2fw has dependencies -# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and -# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree -# is exported read-only for someone to run 'make install'. -ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw) -ihex2fw_dep := -else -ihex2fw_dep := $(obj)/ihex2fw -endif - # .HEX is also Intel HEX, but where the offset and length in each record # is actually meaningful, because the firmware has to be loaded in a certain # order rather than as a single binary blob. Thus, we convert them into our # more compact binary representation of ihex records () -$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %) +$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %) $(call cmd,ihex2fw) # .H16 is our own modified form of Intel HEX, with 16-bit length for records. -$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %) +$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %) $(call cmd,h16tofw) $(firmware-dirs): diff --git a/sound/i2c/other/tea575x-tuner.c b/sound/i2c/other/tea575x-tuner.c index c13a178383ba..549b4eba1496 100644 --- a/sound/i2c/other/tea575x-tuner.c +++ b/sound/i2c/other/tea575x-tuner.c @@ -18,7 +18,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - */ + */ #include #include @@ -89,7 +89,7 @@ static int snd_tea575x_ioctl(struct inode *inode, struct file *file, { struct snd_tea575x *tea = video_drvdata(file); void __user *arg = (void __user *)data; - + switch(cmd) { case VIDIOCGCAP: { @@ -110,9 +110,9 @@ static int snd_tea575x_ioctl(struct inode *inode, struct file *file, case VIDIOCGTUNER: { struct video_tuner v; - if (copy_from_user(&v, arg,sizeof(v))!=0) + if (copy_from_user(&v, arg,sizeof(v))!=0) return -EFAULT; - if (v.tuner) /* Only 1 tuner */ + if (v.tuner) /* Only 1 tuner */ return -EINVAL; v.rangelow = (87*16000); v.rangehigh = (108*16000); @@ -144,24 +144,24 @@ static int snd_tea575x_ioctl(struct inode *inode, struct file *file, snd_tea575x_set_freq(tea); return 0; case VIDIOCGAUDIO: - { + { struct video_audio v; memset(&v, 0, sizeof(v)); strcpy(v.name, "Radio"); if(copy_to_user(arg,&v, sizeof(v))) return -EFAULT; - return 0; + return 0; } case VIDIOCSAUDIO: { struct video_audio v; - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; + if(copy_from_user(&v, arg, sizeof(v))) + return -EFAULT; if (tea->ops->mute) tea->ops->mute(tea, (v.flags & VIDEO_AUDIO_MUTE) ? 1 : 0); - if(v.audio) + if(v.audio) return -EINVAL; return 0; } @@ -240,11 +240,11 @@ static int __init alsa_tea575x_module_init(void) { return 0; } - + static void __exit alsa_tea575x_module_exit(void) { } - + module_init(alsa_tea575x_module_init) module_exit(alsa_tea575x_module_exit) -- cgit v1.2.3 From cd3cde1271c6c597c16e4c22810449949c675092 Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Sun, 9 Nov 2008 15:26:25 -0300 Subject: V4L/DVB (9534): cx88: Add support for Prof 6200 DVB-S PCI card The card based on stv0299 or stv0288 demodulators. Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx88 | 1 + drivers/media/video/cx88/cx88-cards.c | 17 +++++++++++++++++ drivers/media/video/cx88/cx88-dvb.c | 1 + drivers/media/video/cx88/cx88.h | 1 + 4 files changed, 20 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index dc8da94061ac..0d08f1edcf6d 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -76,3 +76,4 @@ 75 -> PROF 7300 DVB-S/S2 [B033:3033] 76 -> SATTRADE ST4200 DVB-S/S2 [b200:4200] 77 -> TBS 8910 DVB-S [8910:8888] + 78 -> Prof 6200 DVB-S [b022:3022] diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index bbe5b3343ac3..38bf5ee4d4a7 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1871,6 +1871,18 @@ static const struct cx88_board cx88_boards[] = { } }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_PROF_6200] = { + .name = "Prof 6200 DVB-S", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, [CX88_BOARD_PROF_7300] = { .name = "PROF 7300 DVB-S/S2", .tuner_type = UNSET, @@ -2292,6 +2304,10 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x8920, .subdevice = 0x8888, .card = CX88_BOARD_TBS_8920, + }, { + .subvendor = 0xb022, + .subdevice = 0x3022, + .card = CX88_BOARD_PROF_6200, }, { .subvendor = 0xB033, .subdevice = 0x3033, @@ -2912,6 +2928,7 @@ static void cx88_card_setup(struct cx88_core *core) case CX88_BOARD_OMICOM_SS4_PCI: case CX88_BOARD_TBS_8910: case CX88_BOARD_TBS_8920: + case CX88_BOARD_PROF_6200: case CX88_BOARD_PROF_7300: case CX88_BOARD_SATTRADE_ST4200: cx_write(MO_SRST_IO, 0); diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index bab28112e40e..3c328a2f28fb 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -1042,6 +1042,7 @@ static int dvb_register(struct cx8802_dev *dev) 0x08, ISL6421_DCL, 0x00); } break; + case CX88_BOARD_PROF_6200: case CX88_BOARD_TBS_8910: case CX88_BOARD_TEVII_S420: fe0->dvb.frontend = dvb_attach(stv0299_attach, diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index ae1b89a88bcd..20649b25f7ba 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -230,6 +230,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_PROF_7300 75 #define CX88_BOARD_SATTRADE_ST4200 76 #define CX88_BOARD_TBS_8910 77 +#define CX88_BOARD_PROF_6200 78 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, -- cgit v1.2.3 From 917118745a610765e98621c4a81d7744806e4954 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Tue, 28 Oct 2008 08:00:23 -0300 Subject: V4L/DVB (9553): gspca: Webcam 145f:013a added in pac207. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac207.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 004818fab040..2a23fe31e0ef 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -263,6 +263,7 @@ etoms 102c:6251 Qcam xxxxxx VGA zc3xx 10fd:0128 Typhoon Webshot II USB 300k 0x0128 spca561 10fd:7e50 FlyCam Usb 100 zc3xx 10fd:8050 Typhoon Webshot II USB 300k +pac207 145f:013a Trust WB-1300N spca501 1776:501c Arowana 300K CMOS Camera t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index 0b0c573d06da..39473e6b9140 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -536,6 +536,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2471)}, {USB_DEVICE(0x093a, 0x2472)}, {USB_DEVICE(0x093a, 0x2476)}, + {USB_DEVICE(0x145f, 0x013a)}, {USB_DEVICE(0x2001, 0xf115)}, {} }; -- cgit v1.2.3 From 864ec0b7a03c8401e6e49f9e480489478ea14cb5 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Wed, 12 Nov 2008 02:05:28 -0300 Subject: V4L/DVB (9590): Add registration for Pinnacle 80e ATSC tuner Add registration for Pinnacle 80e ATSC tuner Register the em2874 based Pinnacle 80e device. Note that support for this device also requires the new drx-j driver (which is not available yet) Thanks for Ray Lu from Empia for providing the em2874 datasheet. Thanks to Joerg Schindler from Pinnacle for providing sample hardware. Thanks to Rainer Miethling from Pinnacle for providing engineering support. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 1 + drivers/media/video/em28xx/em28xx-cards.c | 34 +++++++++++++++++++++++++++++++ drivers/media/video/em28xx/em28xx.h | 1 + 3 files changed, 36 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 187cc48d0924..ea537f5ae408 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -57,3 +57,4 @@ 56 -> Pinnacle Hybrid Pro (2) (em2882) [2304:0226] 57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316] 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] + 59 -> Pinnacle PCTV HD Mini (em2874) [2304:023f] diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 791ab2cc7d8f..e4251117cbe3 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1087,6 +1087,20 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_LINE_IN, } }, }, + [EM2874_BOARD_PINNACLE_PCTV_80E] = { + .name = "Pinnacle PCTV HD Mini", + .vchannels = 0, + .tuner_type = TUNER_ABSENT, + .has_dvb = 1, + .decoder = EM28XX_NODECODER, +#ifdef DJH_DEBUG + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + } }, +#endif + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1180,6 +1194,8 @@ struct usb_device_id em28xx_id_table [] = { .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO }, { USB_DEVICE(0x2304, 0x0227), .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, + { USB_DEVICE(0x2304, 0x023f), + .driver_info = EM2874_BOARD_PINNACLE_PCTV_80E }, { USB_DEVICE(0x0413, 0x6023), .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, { USB_DEVICE(0x093b, 0xa005), @@ -1255,6 +1271,17 @@ static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = { { -1, -1, -1, -1}, }; +/* Pinnacle PCTV HD Mini (80e) GPIOs + 0-5: not used + 6: demod reset, active low + 7: LED on, active high */ +static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = { + {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ + {EM2874_R80_GPIO, 0x80, 0xff, 100},/*Demod reset*/ + {EM2874_R80_GPIO, 0xc0, 0xff, 10}, + { -1, -1, -1, -1}, +}; + /* * EEPROM hash table for devices with generic USB IDs */ @@ -1518,6 +1545,13 @@ void em28xx_pre_card_setup(struct em28xx *dev) /* enables audio for that device */ em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1); break; + + case EM2874_BOARD_PINNACLE_PCTV_80E: + /* Set 400 KHz clock */ + em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x45", 1); + + dev->digital_gpio = em2874_pinnacle_80e_digital; + break; } em28xx_gpio_set(dev, dev->tun_analog_gpio); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 7bf08cebb633..1350a9cea7c5 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -97,6 +97,7 @@ #define EM2882_BOARD_PINNACLE_HYBRID_PRO 56 #define EM2883_BOARD_KWORLD_HYBRID_A316 57 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 +#define EM2874_BOARD_PINNACLE_PCTV_80E 59 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 -- cgit v1.2.3 From 05583625710dfd75880a6cbb68292929d1d4c33c Mon Sep 17 00:00:00 2001 From: Dirk Heer Date: Fri, 21 Nov 2008 19:00:55 -0300 Subject: V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.bttv | 7 ++-- drivers/media/video/bt8xx/bttv-cards.c | 60 +++++++++++++++++++++++++++++---- drivers/media/video/bt8xx/bttv.h | 8 +++-- 3 files changed, 65 insertions(+), 10 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv index 60ba66836038..0d93fa1ac25e 100644 --- a/Documentation/video4linux/CARDLIST.bttv +++ b/Documentation/video4linux/CARDLIST.bttv @@ -104,8 +104,8 @@ 103 -> Grand X-Guard / Trust 814PCI [0304:0102] 104 -> Nebula Electronics DigiTV [0071:0101] 105 -> ProVideo PV143 [aa00:1430,aa00:1431,aa00:1432,aa00:1433,aa03:1433] -106 -> PHYTEC VD-009-X1 MiniDIN (bt878) -107 -> PHYTEC VD-009-X1 Combi (bt878) +106 -> PHYTEC VD-009-X1 VD-011 MiniDIN (bt878) +107 -> PHYTEC VD-009-X1 VD-011 Combi (bt878) 108 -> PHYTEC VD-009 MiniDIN (bt878) 109 -> PHYTEC VD-009 Combi (bt878) 110 -> IVC-100 [ff00:a132] @@ -151,3 +151,6 @@ 150 -> Geovision GV-600 [008a:763c] 151 -> Kozumi KTV-01C 152 -> Encore ENL TV-FM-2 [1000:1801] +153 -> PHYTEC VD-012 (bt878) +154 -> PHYTEC VD-012-X1 (bt878) +155 -> PHYTEC VD-012-X2 (bt878) diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 13742b0bbe3e..8629b77666f6 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -2217,9 +2217,9 @@ struct tvcard bttv_tvcards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, - [BTTV_BOARD_VD009X1_MINIDIN] = { + [BTTV_BOARD_VD009X1_VD011_MINIDIN] = { /* M.Klahr@phytec.de */ - .name = "PHYTEC VD-009-X1 MiniDIN (bt878)", + .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, /* card has no tuner */ @@ -2227,14 +2227,14 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x00, .muxsel = { 2, 3, 1, 0 }, .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 1, + .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, - [BTTV_BOARD_VD009X1_COMBI] = { - .name = "PHYTEC VD-009-X1 Combi (bt878)", + [BTTV_BOARD_VD009X1_VD011_COMBI] = { + .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, /* card has no tuner */ @@ -2242,7 +2242,7 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x00, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 1, + .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, @@ -3061,6 +3061,54 @@ struct tvcard bttv_tvcards[] = { .pll = PLL_28, .has_radio = 1, .has_remote = 1, + }, + [BTTV_BOARD_VD012] = { + /* D.Heer@Phytec.de */ + .name = "PHYTEC VD-012 (bt878)", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = UNSET, /* card has no tuner */ + .svhs = UNSET, /* card has no s-video */ + .gpiomask = 0x00, + .muxsel = { 0, 2, 3, 1 }, + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .needs_tvaudio = 0, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD012_X1] = { + /* D.Heer@Phytec.de */ + .name = "PHYTEC VD-012-X1 (bt878)", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = UNSET, /* card has no tuner */ + .svhs = 3, + .gpiomask = 0x00, + .muxsel = { 2, 3, 1 }, + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .needs_tvaudio = 0, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD012_X2] = { + /* D.Heer@Phytec.de */ + .name = "PHYTEC VD-012-X2 (bt878)", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = UNSET, /* card has no tuner */ + .svhs = 3, + .gpiomask = 0x00, + .muxsel = { 3, 2, 1 }, + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ + .needs_tvaudio = 0, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, } }; diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h index bc2c88499ab9..529bf6cf634d 100644 --- a/drivers/media/video/bt8xx/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -130,8 +130,8 @@ #define BTTV_BOARD_XGUARD 0x67 #define BTTV_BOARD_NEBULA_DIGITV 0x68 #define BTTV_BOARD_PV143 0x69 -#define BTTV_BOARD_VD009X1_MINIDIN 0x6a -#define BTTV_BOARD_VD009X1_COMBI 0x6b +#define BTTV_BOARD_VD009X1_VD011_MINIDIN 0x6a +#define BTTV_BOARD_VD009X1_VD011_COMBI 0x6b #define BTTV_BOARD_VD009_MINIDIN 0x6c #define BTTV_BOARD_VD009_COMBI 0x6d #define BTTV_BOARD_IVC100 0x6e @@ -177,6 +177,10 @@ #define BTTV_BOARD_GEOVISION_GV600 0x96 #define BTTV_BOARD_KOZUMI_KTV_01C 0x97 #define BTTV_BOARD_ENLTV_FM_2 0x98 +#define BTTV_BOARD_VD012 0x99 +#define BTTV_BOARD_VD012_X1 0x9a +#define BTTV_BOARD_VD012_X2 0x9b + /* more card-specific defines */ #define PT2254_L_CHANNEL 0x10 -- cgit v1.2.3 From 6e4ae872c580d6a388a52ddfdfc93b4215af1180 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sat, 22 Nov 2008 05:35:49 -0300 Subject: V4L/DVB (9713): gspca: Add the ov534 webcams in the gspca documentation. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 3 +++ drivers/media/video/gspca/gspca.c | 3 +++ 2 files changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 2a23fe31e0ef..4c96adc0ba5b 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -169,6 +169,8 @@ spca500 06bd:0404 Agfa CL20 spca500 06be:0800 Optimedia sunplus 06d6:0031 Trust 610 LCD PowerC@m Zoom spca506 06e1:a190 ADS Instant VCD +ov534 06f8:3002 Hercules Blog Webcam +ov534 06f8:3003 Hercules Dualpix HD Weblog spca508 0733:0110 ViewQuest VQ110 spca508 0130:0130 Clone Digital Webcam 11043 spca501 0733:0401 Intel Create and Share @@ -263,6 +265,7 @@ etoms 102c:6251 Qcam xxxxxx VGA zc3xx 10fd:0128 Typhoon Webshot II USB 300k 0x0128 spca561 10fd:7e50 FlyCam Usb 100 zc3xx 10fd:8050 Typhoon Webshot II USB 300k +ov534 1415:2000 Sony HD Eye for PS3 (SLEH 00201) pac207 145f:013a Trust WB-1300N spca501 1776:501c Arowana 300K CMOS Camera t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 0d233c724875..7f8b798deb1b 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1923,6 +1923,9 @@ void gspca_disconnect(struct usb_interface *intf) { struct gspca_dev *gspca_dev = usb_get_intfdata(intf); + gspca_dev->present = 0; + gspca_dev->streaming = 0; + usb_set_intfdata(intf, NULL); /* release the device */ -- cgit v1.2.3 From 2966af73e70dee461c256b5eb877b2ff757f8c82 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 30 Dec 2008 09:25:58 -0600 Subject: virtio: use LGUEST_VRING_ALIGN instead of relying on pagesize This doesn't really matter, since lguest is i386 only at the moment, but we could actually choose a different value. (lguest doesn't have a guarenteed ABI). Signed-off-by: Rusty Russell --- Documentation/lguest/lguest.c | 6 +++--- drivers/lguest/lguest_device.c | 2 +- include/linux/lguest_launcher.h | 4 ++++ 3 files changed, 8 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 804520633fcf..aa2574ca94c7 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -1030,7 +1030,7 @@ static void update_device_status(struct device *dev) /* Zero out the virtqueues. */ for (vq = dev->vq; vq; vq = vq->next) { memset(vq->vring.desc, 0, - vring_size(vq->config.num, getpagesize())); + vring_size(vq->config.num, LGUEST_VRING_ALIGN)); lg_last_avail(vq) = 0; } } else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) { @@ -1211,7 +1211,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs, void *p; /* First we need some memory for this virtqueue. */ - pages = (vring_size(num_descs, getpagesize()) + getpagesize() - 1) + pages = (vring_size(num_descs, LGUEST_VRING_ALIGN) + getpagesize() - 1) / getpagesize(); p = get_pages(pages); @@ -1228,7 +1228,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs, vq->config.pfn = to_guest_phys(p) / getpagesize(); /* Initialize the vring. */ - vring_init(&vq->vring, num_descs, p, getpagesize()); + vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN); /* Append virtqueue to this device's descriptor. We use * device_config() to get the end of the device's current virtqueues; diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index a661bbdae3d6..f062dc55c573 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -250,7 +250,7 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev, /* Figure out how many pages the ring will take, and map that memory */ lvq->pages = lguest_map((unsigned long)lvq->config.pfn << PAGE_SHIFT, DIV_ROUND_UP(vring_size(lvq->config.num, - PAGE_SIZE), + LGUEST_VRING_ALIGN), PAGE_SIZE)); if (!lvq->pages) { err = -ENOMEM; diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h index e7217dc58f39..bd0eba760522 100644 --- a/include/linux/lguest_launcher.h +++ b/include/linux/lguest_launcher.h @@ -59,4 +59,8 @@ enum lguest_req LHREQ_IRQ, /* + irq */ LHREQ_BREAK, /* + on/off flag (on blocks until someone does off) */ }; + +/* The alignment to use between consumer and producer parts of vring. + * x86 pagesize for historical reasons. */ +#define LGUEST_VRING_ALIGN 4096 #endif /* _LINUX_LGUEST_LAUNCHER */ -- cgit v1.2.3 From 58a24566449892dda409b9ad92c2e56c76c5670c Mon Sep 17 00:00:00 2001 From: Matias Zabaljauregui Date: Mon, 29 Sep 2008 01:40:07 -0300 Subject: lguest: move the initial guest page table creation code to the host This patch moves the initial guest page table creation code to the host, so the launcher keeps working with PAE enabled configs. Signed-off-by: Matias Zabaljauregui Signed-off-by: Rusty Russell --- Documentation/lguest/lguest.c | 60 ++++------------------------------ arch/x86/lguest/i386_head.S | 15 --------- drivers/lguest/lg.h | 2 +- drivers/lguest/lguest_user.c | 13 +++----- drivers/lguest/page_tables.c | 72 +++++++++++++++++++++++++++++++++++++++-- include/linux/lguest_launcher.h | 2 +- 6 files changed, 83 insertions(+), 81 deletions(-) (limited to 'Documentation') diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index aa2574ca94c7..f2dbbf3bdeab 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -481,51 +481,6 @@ static unsigned long load_initrd(const char *name, unsigned long mem) /* We return the initrd size. */ return len; } - -/* Once we know how much memory we have we can construct simple linear page - * tables which set virtual == physical which will get the Guest far enough - * into the boot to create its own. - * - * We lay them out of the way, just below the initrd (which is why we need to - * know its size here). */ -static unsigned long setup_pagetables(unsigned long mem, - unsigned long initrd_size) -{ - unsigned long *pgdir, *linear; - unsigned int mapped_pages, i, linear_pages; - unsigned int ptes_per_page = getpagesize()/sizeof(void *); - - mapped_pages = mem/getpagesize(); - - /* Each PTE page can map ptes_per_page pages: how many do we need? */ - linear_pages = (mapped_pages + ptes_per_page-1)/ptes_per_page; - - /* We put the toplevel page directory page at the top of memory. */ - pgdir = from_guest_phys(mem) - initrd_size - getpagesize(); - - /* Now we use the next linear_pages pages as pte pages */ - linear = (void *)pgdir - linear_pages*getpagesize(); - - /* Linear mapping is easy: put every page's address into the mapping in - * order. PAGE_PRESENT contains the flags Present, Writable and - * Executable. */ - for (i = 0; i < mapped_pages; i++) - linear[i] = ((i * getpagesize()) | PAGE_PRESENT); - - /* The top level points to the linear page table pages above. */ - for (i = 0; i < mapped_pages; i += ptes_per_page) { - pgdir[i/ptes_per_page] - = ((to_guest_phys(linear) + i*sizeof(void *)) - | PAGE_PRESENT); - } - - verbose("Linear mapping of %u pages in %u pte pages at %#lx\n", - mapped_pages, linear_pages, to_guest_phys(linear)); - - /* We return the top level (guest-physical) address: the kernel needs - * to know where it is. */ - return to_guest_phys(pgdir); -} /*:*/ /* Simple routine to roll all the commandline arguments together with spaces @@ -548,13 +503,13 @@ static void concat(char *dst, char *args[]) /*L:185 This is where we actually tell the kernel to initialize the Guest. We * saw the arguments it expects when we looked at initialize() in lguest_user.c: - * the base of Guest "physical" memory, the top physical page to allow, the - * top level pagetable and the entry point for the Guest. */ -static int tell_kernel(unsigned long pgdir, unsigned long start) + * the base of Guest "physical" memory, the top physical page to allow and the + * entry point for the Guest. */ +static int tell_kernel(unsigned long start) { unsigned long args[] = { LHREQ_INITIALIZE, (unsigned long)guest_base, - guest_limit / getpagesize(), pgdir, start }; + guest_limit / getpagesize(), start }; int fd; verbose("Guest: %p - %p (%#lx)\n", @@ -1941,7 +1896,7 @@ int main(int argc, char *argv[]) { /* Memory, top-level pagetable, code startpoint and size of the * (optional) initrd. */ - unsigned long mem = 0, pgdir, start, initrd_size = 0; + unsigned long mem = 0, start, initrd_size = 0; /* Two temporaries and the /dev/lguest file descriptor. */ int i, c, lguest_fd; /* The boot information for the Guest. */ @@ -2040,9 +1995,6 @@ int main(int argc, char *argv[]) boot->hdr.type_of_loader = 0xFF; } - /* Set up the initial linear pagetables, starting below the initrd. */ - pgdir = setup_pagetables(mem, initrd_size); - /* The Linux boot header contains an "E820" memory map: ours is a * simple, single region. */ boot->e820_entries = 1; @@ -2064,7 +2016,7 @@ int main(int argc, char *argv[]) /* We tell the kernel to initialize the Guest: this returns the open * /dev/lguest file descriptor. */ - lguest_fd = tell_kernel(pgdir, start); + lguest_fd = tell_kernel(start); /* We clone off a thread, which wakes the Launcher whenever one of the * input file descriptors needs attention. We call this the Waker, and diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S index 5c7cef34c9e7..10b9bd35a8ff 100644 --- a/arch/x86/lguest/i386_head.S +++ b/arch/x86/lguest/i386_head.S @@ -30,21 +30,6 @@ ENTRY(lguest_entry) movl $lguest_data - __PAGE_OFFSET, %edx int $LGUEST_TRAP_ENTRY - /* The Host put the toplevel pagetable in lguest_data.pgdir. The movsl - * instruction uses %esi implicitly as the source for the copy we're - * about to do. */ - movl lguest_data - __PAGE_OFFSET + LGUEST_DATA_pgdir, %esi - - /* Copy first 32 entries of page directory to __PAGE_OFFSET entries. - * This means the first 128M of kernel memory will be mapped at - * PAGE_OFFSET where the kernel expects to run. This will get it far - * enough through boot to switch to its own pagetables. */ - movl $32, %ecx - movl %esi, %edi - addl $((__PAGE_OFFSET >> 22) * 4), %edi - rep - movsl - /* Set up the initial stack so we can run C code. */ movl $(init_thread_union+THREAD_SIZE),%esp diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h index 5faefeaf6790..f2c641e0bdde 100644 --- a/drivers/lguest/lg.h +++ b/drivers/lguest/lg.h @@ -164,7 +164,7 @@ void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt); void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt); /* page_tables.c: */ -int init_guest_pagetable(struct lguest *lg, unsigned long pgtable); +int init_guest_pagetable(struct lguest *lg); void free_guest_pagetable(struct lguest *lg); void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable); void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 i); diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index e73a000473cc..34bc017b8b3c 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -146,7 +146,7 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip) return 0; } -/*L:020 The initialization write supplies 4 pointer sized (32 or 64 bit) +/*L:020 The initialization write supplies 3 pointer sized (32 or 64 bit) * values (in addition to the LHREQ_INITIALIZE value). These are: * * base: The start of the Guest-physical memory inside the Launcher memory. @@ -155,9 +155,6 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip) * allowed to access. The Guest memory lives inside the Launcher, so it sets * this to ensure the Guest can only reach its own memory. * - * pgdir: The (Guest-physical) address of the top of the initial Guest - * pagetables (which are set up by the Launcher). - * * start: The first instruction to execute ("eip" in x86-speak). */ static int initialize(struct file *file, const unsigned long __user *input) @@ -166,7 +163,7 @@ static int initialize(struct file *file, const unsigned long __user *input) * Guest. */ struct lguest *lg; int err; - unsigned long args[4]; + unsigned long args[3]; /* We grab the Big Lguest lock, which protects against multiple * simultaneous initializations. */ @@ -192,14 +189,14 @@ static int initialize(struct file *file, const unsigned long __user *input) lg->mem_base = (void __user *)args[0]; lg->pfn_limit = args[1]; - /* This is the first cpu (cpu 0) and it will start booting at args[3] */ - err = lg_cpu_start(&lg->cpus[0], 0, args[3]); + /* This is the first cpu (cpu 0) and it will start booting at args[2] */ + err = lg_cpu_start(&lg->cpus[0], 0, args[2]); if (err) goto release_guest; /* Initialize the Guest's shadow page tables, using the toplevel * address the Launcher gave us. This allocates memory, so can fail. */ - err = init_guest_pagetable(lg, args[2]); + err = init_guest_pagetable(lg); if (err) goto free_regs; diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c index 81d0c6053447..576a8318221c 100644 --- a/drivers/lguest/page_tables.c +++ b/drivers/lguest/page_tables.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "lg.h" /*M:008 We hold reference to pages, which prevents them from being swapped. @@ -581,15 +582,82 @@ void guest_set_pmd(struct lguest *lg, unsigned long gpgdir, u32 idx) release_pgd(lg, lg->pgdirs[pgdir].pgdir + idx); } +/* Once we know how much memory we have we can construct simple identity + * (which set virtual == physical) and linear mappings + * which will get the Guest far enough into the boot to create its own. + * + * We lay them out of the way, just below the initrd (which is why we need to + * know its size here). */ +static unsigned long setup_pagetables(struct lguest *lg, + unsigned long mem, + unsigned long initrd_size) +{ + pgd_t __user *pgdir; + pte_t __user *linear; + unsigned int mapped_pages, i, linear_pages, phys_linear; + unsigned long mem_base = (unsigned long)lg->mem_base; + + /* We have mapped_pages frames to map, so we need + * linear_pages page tables to map them. */ + mapped_pages = mem / PAGE_SIZE; + linear_pages = (mapped_pages + PTRS_PER_PTE - 1) / PTRS_PER_PTE; + + /* We put the toplevel page directory page at the top of memory. */ + pgdir = (pgd_t *)(mem + mem_base - initrd_size - PAGE_SIZE); + + /* Now we use the next linear_pages pages as pte pages */ + linear = (void *)pgdir - linear_pages * PAGE_SIZE; + + /* Linear mapping is easy: put every page's address into the + * mapping in order. */ + for (i = 0; i < mapped_pages; i++) { + pte_t pte; + pte = pfn_pte(i, __pgprot(_PAGE_PRESENT|_PAGE_RW|_PAGE_USER)); + if (copy_to_user(&linear[i], &pte, sizeof(pte)) != 0) + return -EFAULT; + } + + /* The top level points to the linear page table pages above. + * We setup the identity and linear mappings here. */ + phys_linear = (unsigned long)linear - mem_base; + for (i = 0; i < mapped_pages; i += PTRS_PER_PTE) { + pgd_t pgd; + pgd = __pgd((phys_linear + i * sizeof(pte_t)) | + (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER)); + + if (copy_to_user(&pgdir[i / PTRS_PER_PTE], &pgd, sizeof(pgd)) + || copy_to_user(&pgdir[pgd_index(PAGE_OFFSET) + + i / PTRS_PER_PTE], + &pgd, sizeof(pgd))) + return -EFAULT; + } + + /* We return the top level (guest-physical) address: remember where + * this is. */ + return (unsigned long)pgdir - mem_base; +} + /*H:500 (vii) Setting up the page tables initially. * * When a Guest is first created, the Launcher tells us where the toplevel of * its first page table is. We set some things up here: */ -int init_guest_pagetable(struct lguest *lg, unsigned long pgtable) +int init_guest_pagetable(struct lguest *lg) { + u64 mem; + u32 initrd_size; + struct boot_params __user *boot = (struct boot_params *)lg->mem_base; + + /* Get the Guest memory size and the ramdisk size from the boot header + * located at lg->mem_base (Guest address 0). */ + if (copy_from_user(&mem, &boot->e820_map[0].size, sizeof(mem)) + || get_user(initrd_size, &boot->hdr.ramdisk_size)) + return -EFAULT; + /* We start on the first shadow page table, and give it a blank PGD * page. */ - lg->pgdirs[0].gpgdir = pgtable; + lg->pgdirs[0].gpgdir = setup_pagetables(lg, mem, initrd_size); + if (IS_ERR_VALUE(lg->pgdirs[0].gpgdir)) + return lg->pgdirs[0].gpgdir; lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL); if (!lg->pgdirs[0].pgdir) return -ENOMEM; diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h index bd0eba760522..a53407a4165c 100644 --- a/include/linux/lguest_launcher.h +++ b/include/linux/lguest_launcher.h @@ -54,7 +54,7 @@ struct lguest_vqconfig { /* Write command first word is a request. */ enum lguest_req { - LHREQ_INITIALIZE, /* + base, pfnlimit, pgdir, start */ + LHREQ_INITIALIZE, /* + base, pfnlimit, start */ LHREQ_GETDMA, /* No longer used */ LHREQ_IRQ, /* + irq */ LHREQ_BREAK, /* + on/off flag (on blocks until someone does off) */ -- cgit v1.2.3 From 26d5f3a3fe917232cb77e2e3450f7d7f8698259c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 7 Dec 2008 13:19:29 -0300 Subject: V4L/DVB (9772): saa7134: Add support for Kworld Plus TV Analog Lite PCI Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 1 + drivers/media/common/ir-keymaps.c | 61 +++++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-cards.c | 44 +++++++++++++++++++++ drivers/media/video/saa7134/saa7134-input.c | 14 +++++++ drivers/media/video/saa7134/saa7134.h | 1 + include/media/ir-common.h | 1 + 6 files changed, 122 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index dc67eef38ff9..dd979dca8af6 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -151,3 +151,4 @@ 150 -> Zogis Real Angel 220 151 -> ADS Tech Instant HDTV [1421:0380] 152 -> Asus Tiger Rev:1.00 [1043:4857] +153 -> Kworld Plus TV Analog Lite PCI [17de:7128] diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index 3534cdc1f953..d8229a0e9a9c 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -2391,6 +2391,67 @@ IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE] = { }; EXPORT_SYMBOL_GPL(ir_codes_powercolor_real_angel); +/* Kworld Plus TV Analog Lite PCI IR + Mauro Carvalho Chehab + */ +IR_KEYTAB_TYPE ir_codes_kworld_plus_tv_analog[IR_KEYTAB_SIZE] = { + [0x0c] = KEY_PROG1, /* Kworld key */ + [0x16] = KEY_CLOSECD, /* -> ) */ + [0x1d] = KEY_POWER2, + + [0x00] = KEY_1, + [0x01] = KEY_2, + [0x02] = KEY_3, /* Two keys have the same code: 3 and left */ + [0x03] = KEY_4, /* Two keys have the same code: 3 and right */ + [0x04] = KEY_5, + [0x05] = KEY_6, + [0x06] = KEY_7, + [0x07] = KEY_8, + [0x08] = KEY_9, + [0x0a] = KEY_0, + + [0x09] = KEY_AGAIN, + [0x14] = KEY_MUTE, + + [0x20] = KEY_UP, + [0x21] = KEY_DOWN, + [0x0b] = KEY_ENTER, + + [0x10] = KEY_CHANNELUP, + [0x11] = KEY_CHANNELDOWN, + + /* Couldn't map key left/key right since those + conflict with '3' and '4' scancodes + I dunno what the original driver does + */ + + [0x13] = KEY_VOLUMEUP, + [0x12] = KEY_VOLUMEDOWN, + + /* The lower part of the IR + There are several duplicated keycodes there. + Most of them conflict with digits. + Add mappings just to the unused scancodes. + Somehow, the original driver has a way to know, + but this doesn't seem to be on some GPIO. + Also, it is not related to the time between keyup + and keydown. + */ + [0x19] = KEY_PAUSE, /* Timeshift */ + [0x1a] = KEY_STOP, + [0x1b] = KEY_RECORD, + + [0x22] = KEY_TEXT, + + [0x15] = KEY_AUDIO, /* ((*)) */ + [0x0f] = KEY_ZOOM, + [0x1c] = KEY_SHUFFLE, /* snapshot */ + + [0x18] = KEY_RED, /* B */ + [0x23] = KEY_GREEN, /* C */ +}; +EXPORT_SYMBOL_GPL(ir_codes_kworld_plus_tv_analog); + IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = { [0x20] = KEY_LIST, [0x00] = KEY_POWER, diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 863522899e85..f0b95804e414 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4606,6 +4606,43 @@ struct saa7134_board saa7134_boards[] = { .gpio = 0x0200000, }, }, + [SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG] = { + .name = "Kworld Plus TV Analog Lite PCI", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_YMEC_TVF_5533MF, + .radio_type = TUNER_TEA5767, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x80000700, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + .gpio = 0x100, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x200, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x200, + } }, + .radio = { + .name = name_radio, + .vmux = 1, + .amux = LINE1, + .gpio = 0x100, + }, + .mute = { + .name = name_mute, + .vmux = 8, + .amux = 2, + }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -5652,6 +5689,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = 0x1043, .subdevice = 0x4878, /* REV:1.02G */ .driver_data = SAA7134_BOARD_ASUSTeK_TIGER_3IN1, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x17de, + .subdevice = 0x7128, + .driver_data = SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG, }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, @@ -5880,6 +5923,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_BEHOLD_507_9FM: case SAA7134_BOARD_GENIUS_TVGO_A11MCE: case SAA7134_BOARD_REAL_ANGEL_220: + case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG: dev->has_remote = SAA7134_REMOTE_GPIO; break; case SAA7134_BOARD_FLYDVBS_LR300: diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index c53fd5f9f6b5..d2124f64e4e2 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -97,6 +97,15 @@ static int build_key(struct saa7134_dev *dev) dprintk("build_key gpio=0x%x mask=0x%x data=%d\n", gpio, ir->mask_keycode, data); + switch (dev->board) { + case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG: + if (data == ir->mask_keycode) + ir_input_nokey(ir->dev, &ir->ir); + else + ir_input_keydown(ir->dev, &ir->ir, data, data); + return 0; + } + if (ir->polling) { if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) || (ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) { @@ -586,6 +595,11 @@ int saa7134_input_init1(struct saa7134_dev *dev) mask_keyup = 0x4000; polling = 50; /* ms */ break; + case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG: + ir_codes = ir_codes_kworld_plus_tv_analog; + mask_keycode = 0x7f; + polling = 40; /* ms */ + break; } if (NULL == ir_codes) { printk("%s: Oops: IR config error [card=%d]\n", diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 9070efe4a4d0..f6c1fcc72070 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -275,6 +275,7 @@ struct saa7134_format { #define SAA7134_BOARD_REAL_ANGEL_220 150 #define SAA7134_BOARD_ADS_INSTANT_HDTV_PCI 151 #define SAA7134_BOARD_ASUSTeK_TIGER 152 +#define SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG 153 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8 diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 3a88e13a20e9..5bf2ea00678c 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -158,6 +158,7 @@ extern IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_real_audio_220_32_keys[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_msi_tvanywhere_plus[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_ati_tv_wonder_hd_600[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_kworld_plus_tv_analog[IR_KEYTAB_SIZE]; #endif /* -- cgit v1.2.3 From f89bc32974a4376e8393001484af28d8c3350ab4 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Mon, 1 Dec 2008 21:01:04 -0300 Subject: V4L/DVB (9793): em28xx: Add specific entry for WinTV-HVR 850 Added specific entry for WinTV-HVR 850 Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 3 ++- drivers/media/video/em28xx/em28xx-cards.c | 32 +++++++++++++++++++++++++++++-- drivers/media/video/em28xx/em28xx-dvb.c | 1 + drivers/media/video/em28xx/em28xx.h | 1 + 4 files changed, 34 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index ea537f5ae408..a6734eb7bf7b 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -14,7 +14,7 @@ 13 -> Terratec Prodigy XS (em2880) [0ccd:0047] 14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) [eb1a:2821] 15 -> V-Gear PocketTV (em2800) - 16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b,2040:651f] + 16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b] 17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227] 18 -> Hauppauge WinTV HVR 900 (R2) (em2880) [2040:6502] 19 -> PointNix Intra-Oral Camera (em2860) @@ -58,3 +58,4 @@ 57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316] 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] 59 -> Pinnacle PCTV HD Mini (em2874) [2304:023f] + 60 -> Hauppauge WinTV HVR 850 (em2883) [2040:651f] diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 01757c018b5e..745268e11255 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -650,6 +650,32 @@ struct em28xx_board em28xx_boards[] = { .gpio = hauppauge_wintv_hvr_900_analog, } }, }, + [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { + .name = "Hauppauge WinTV HVR 850", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = hauppauge_wintv_hvr_900_digital, + .ir_codes = ir_codes_hauppauge_new, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = hauppauge_wintv_hvr_900_analog, + } }, + }, [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { .name = "Hauppauge WinTV HVR 950", .tuner_type = TUNER_XC2028, @@ -1281,8 +1307,8 @@ struct usb_device_id em28xx_id_table [] = { .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, - { USB_DEVICE(0x2040, 0x651f), /* HCW HVR-850 */ - .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, + { USB_DEVICE(0x2040, 0x651f), + .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, { USB_DEVICE(0x0438, 0xb002), .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, { USB_DEVICE(0x2001, 0xf112), @@ -1502,6 +1528,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->demod = XC3028_FE_DEFAULT; ctl->fname = XC3028L_DEFAULT_FIRMWARE; break; + case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: /* FIXME: Better to specify the needed IF */ @@ -1686,6 +1713,7 @@ void em28xx_card_setup(struct em28xx *dev) case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: + case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: { struct tveeprom tv; diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 211156d458f0..967bf6859fce 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -409,6 +409,7 @@ static int dvb_init(struct em28xx *dev) em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); /* init frontend */ switch (dev->model) { + case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 64459a160762..54802d2d1bc5 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -98,6 +98,7 @@ #define EM2883_BOARD_KWORLD_HYBRID_A316 57 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 #define EM2874_BOARD_PINNACLE_PCTV_80E 59 +#define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 60 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 -- cgit v1.2.3 From 9bb1b7e879091f09fc677dca10c5e132b68a9da3 Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Sun, 23 Nov 2008 14:11:16 -0300 Subject: V4L/DVB (9795): Add Compro VideoMate E650F (DVB-T part only). Add Compro VideoMate E650F (DVB-T part only). The card based on cx23885 PCI-Express chip, xc3028 tuner and ce6353 demodulator. Cc: Steven Toth Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 1 + drivers/media/video/cx23885/cx23885-cards.c | 12 ++++++++++++ drivers/media/video/cx23885/cx23885-dvb.c | 1 + drivers/media/video/cx23885/cx23885.h | 1 + 4 files changed, 15 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 64823ccacd69..35ea130e9898 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -11,3 +11,4 @@ 10 -> DViCO FusionHDTV7 Dual Express [18ac:d618] 11 -> DViCO FusionHDTV DVB-T Dual Express [18ac:db78] 12 -> Leadtek Winfast PxDVR3200 H [107d:6681] + 13 -> Compro VideoMate E650F [185b:e800] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index dac5ccc9ba72..caa098beeecf 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -158,6 +158,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Leadtek Winfast PxDVR3200 H", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_COMPRO_VIDEOMATE_E650F] = { + .name = "Compro VideoMate E650F", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -237,6 +241,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x107d, .subdevice = 0x6681, .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H, + }, { + .subvendor = 0x185b, + .subdevice = 0xe800, + .card = CX23885_BOARD_COMPRO_VIDEOMATE_E650F, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -390,6 +398,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg) case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: /* Tuner Reset Command */ bitmask = 0x04; break; @@ -530,6 +539,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx_set(GP0_IO, 0x000f000f); break; case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: /* GPIO-2 xc3028 tuner reset */ /* The following GPIO's are on the internal AVCore (cx25840) */ @@ -630,6 +640,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_HAUPPAUGE_HVR1400: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: default: ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ @@ -644,6 +655,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1800lp: case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: request_module("cx25840"); break; } diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index e1aac07b3158..1c454128a9df 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -502,6 +502,7 @@ static int dvb_register(struct cx23885_tsport *port) break; } case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: i2c_bus = &dev->i2c_bus[0]; fe0->dvb.frontend = dvb_attach(zl10353_attach, diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 1d53f54cd943..67828029fc69 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -66,6 +66,7 @@ #define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10 #define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11 #define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12 +#define CX23885_BOARD_COMPRO_VIDEOMATE_E650F 13 /* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ #define CX23885_NORMS (\ -- cgit v1.2.3 From a5525685eeaec8e720323180530181ffe69a24f5 Mon Sep 17 00:00:00 2001 From: Hermann Pitton Date: Fri, 5 Dec 2008 19:49:34 -0300 Subject: V4L/DVB (9798): saa7134: add analog and DVB-T support for Medion/Creatix CTX946 How to enable the mpeg encoder is not found yet. The card comes up with gpio 0x0820000 for DVB-T. Signed-off-by: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 2 +- drivers/media/video/saa7134/saa7134-cards.c | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index dd979dca8af6..335aef4dcaeb 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -10,7 +10,7 @@ 9 -> Medion 5044 10 -> Kworld/KuroutoShikou SAA7130-TVPCI 11 -> Terratec Cinergy 600 TV [153b:1143] - 12 -> Medion 7134 [16be:0003] + 12 -> Medion 7134 [16be:0003,16be:5000] 13 -> Typhoon TV+Radio 90031 14 -> ELSA EX-VISION 300TV [1048:226b] 15 -> ELSA EX-VISION 500TV [1048:226a] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index f0b95804e414..a2e3f6729c5b 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4772,6 +4772,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subdevice = 0x0003, .driver_data = SAA7134_BOARD_MD7134, },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x16be, /* CTX946 analog TV, HW mpeg, DVB-T */ + .subdevice = 0x5000, /* only analog TV and DVB-T for now */ + .driver_data = SAA7134_BOARD_MD7134, + }, { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7130, .subvendor = 0x1048, -- cgit v1.2.3 From b1f1d76ef7cc96541b6a16bff7082e9033f0ba08 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Wed, 10 Dec 2008 18:27:39 -0300 Subject: V4L/DVB (9812): [PATCH] short help for Technisat cards to select the right configuration This patch adds a short help for Technisat cards to help the user selecting the right configuration for his card(s). Signed-off-by: Uwe Bugla Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- Documentation/dvb/technisat.txt | 69 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/dvb/technisat.txt (limited to 'Documentation') diff --git a/Documentation/dvb/technisat.txt b/Documentation/dvb/technisat.txt new file mode 100644 index 000000000000..cdf6ee4b2da1 --- /dev/null +++ b/Documentation/dvb/technisat.txt @@ -0,0 +1,69 @@ +How to set up the Technisat devices +=================================== + +1) Find out what device you have +================================ + +First start your linux box with a shipped kernel: +lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example: +02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02) + +dmesg | grep frontend may show you for example: +DVB: registering frontend 0 (Conexant CX24123/CX24109)... + +2) Kernel compilation: +====================== + +If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one: +"Multimedia devices" => "Customise analog and hybrid tuner modules to build" +In this directory uncheck every driver which is activated there. + +Then please activate: +2a) Main module part: + +a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" +b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR +c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter +d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers" +Notice: d.) is helpful for troubleshooting + +2b) Frontend module part: + +1.) Revision 2.3: +a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" +b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based" + +2.) Revision 2.6: +a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" +b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based" + +3.) Revision 2.7: +a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" +b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based" +c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" +d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" + +4.) Revision 2.8: +a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" +b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" +c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based" +d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" + +5.) DVB-T card: +a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" +b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based" + +6.) DVB-C card: +a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" +b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based" + +7.) ATSC card 1st generation: +a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" +b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510" + +8.) ATSC card 2nd generation: +a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" +b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based" +c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based" + +Author: Uwe Bugla December 2008 -- cgit v1.2.3 From 2a1fcdf08230522bd5024f91da24aaa6e8d81f59 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 29 Nov 2008 21:36:58 -0300 Subject: V4L/DVB (9820): v4l2: add v4l2_device and v4l2_subdev structs to the v4l2 framework. Start implementing a proper v4l2 framework as discussed during the Linux Plumbers Conference 2008. Introduces v4l2_device (for device instances) and v4l2_subdev (representing sub-device instances). Signed-off-by: Hans Verkuil Reviewed-by: Laurent Pinchart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Andy Walls Reviewed-by: David Brownell Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/v4l2-framework.txt | 362 +++++++++++++++++++++++++++ drivers/media/video/Makefile | 2 +- drivers/media/video/v4l2-device.c | 86 +++++++ drivers/media/video/v4l2-subdev.c | 108 ++++++++ include/media/v4l2-device.h | 109 ++++++++ include/media/v4l2-subdev.h | 188 ++++++++++++++ 6 files changed, 854 insertions(+), 1 deletion(-) create mode 100644 Documentation/video4linux/v4l2-framework.txt create mode 100644 drivers/media/video/v4l2-device.c create mode 100644 drivers/media/video/v4l2-subdev.c create mode 100644 include/media/v4l2-device.h create mode 100644 include/media/v4l2-subdev.h (limited to 'Documentation') diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt new file mode 100644 index 000000000000..60eaf54e7eff --- /dev/null +++ b/Documentation/video4linux/v4l2-framework.txt @@ -0,0 +1,362 @@ +Overview of the V4L2 driver framework +===================================== + +This text documents the various structures provided by the V4L2 framework and +their relationships. + + +Introduction +------------ + +The V4L2 drivers tend to be very complex due to the complexity of the +hardware: most devices have multiple ICs, export multiple device nodes in +/dev, and create also non-V4L2 devices such as DVB, ALSA, FB, I2C and input +(IR) devices. + +Especially the fact that V4L2 drivers have to setup supporting ICs to +do audio/video muxing/encoding/decoding makes it more complex than most. +Usually these ICs are connected to the main bridge driver through one or +more I2C busses, but other busses can also be used. Such devices are +called 'sub-devices'. + +For a long time the framework was limited to the video_device struct for +creating V4L device nodes and video_buf for handling the video buffers +(note that this document does not discuss the video_buf framework). + +This meant that all drivers had to do the setup of device instances and +connecting to sub-devices themselves. Some of this is quite complicated +to do right and many drivers never did do it correctly. + +There is also a lot of common code that could never be refactored due to +the lack of a framework. + +So this framework sets up the basic building blocks that all drivers +need and this same framework should make it much easier to refactor +common code into utility functions shared by all drivers. + + +Structure of a driver +--------------------- + +All drivers have the following structure: + +1) A struct for each device instance containing the device state. + +2) A way of initializing and commanding sub-devices (if any). + +3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX, /dev/radioX and + /dev/vtxX) and keeping track of device-node specific data. + +4) Filehandle-specific structs containing per-filehandle data. + +This is a rough schematic of how it all relates: + + device instances + | + +-sub-device instances + | + \-V4L2 device nodes + | + \-filehandle instances + + +Structure of the framework +-------------------------- + +The framework closely resembles the driver structure: it has a v4l2_device +struct for the device instance data, a v4l2_subdev struct to refer to +sub-device instances, the video_device struct stores V4L2 device node data +and in the future a v4l2_fh struct will keep track of filehandle instances +(this is not yet implemented). + + +struct v4l2_device +------------------ + +Each device instance is represented by a struct v4l2_device (v4l2-device.h). +Very simple devices can just allocate this struct, but most of the time you +would embed this struct inside a larger struct. + +You must register the device instance: + + v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev); + +Registration will initialize the v4l2_device struct and link dev->driver_data +to v4l2_dev. Registration will also set v4l2_dev->name to a value derived from +dev (driver name followed by the bus_id, to be precise). You may change the +name after registration if you want. + +You unregister with: + + v4l2_device_unregister(struct v4l2_device *v4l2_dev); + +Unregistering will also automatically unregister all subdevs from the device. + +Sometimes you need to iterate over all devices registered by a specific +driver. This is usually the case if multiple device drivers use the same +hardware. E.g. the ivtvfb driver is a framebuffer driver that uses the ivtv +hardware. The same is true for alsa drivers for example. + +You can iterate over all registered devices as follows: + +static int callback(struct device *dev, void *p) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev); + + /* test if this device was inited */ + if (v4l2_dev == NULL) + return 0; + ... + return 0; +} + +int iterate(void *p) +{ + struct device_driver *drv; + int err; + + /* Find driver 'ivtv' on the PCI bus. + pci_bus_type is a global. For USB busses use usb_bus_type. */ + drv = driver_find("ivtv", &pci_bus_type); + /* iterate over all ivtv device instances */ + err = driver_for_each_device(drv, NULL, p, callback); + put_driver(drv); + return err; +} + +Sometimes you need to keep a running counter of the device instance. This is +commonly used to map a device instance to an index of a module option array. + +The recommended approach is as follows: + +static atomic_t drv_instance = ATOMIC_INIT(0); + +static int __devinit drv_probe(struct pci_dev *dev, + const struct pci_device_id *pci_id) +{ + ... + state->instance = atomic_inc_return(&drv_instance) - 1; +} + + +struct v4l2_subdev +------------------ + +Many drivers need to communicate with sub-devices. These devices can do all +sort of tasks, but most commonly they handle audio and/or video muxing, +encoding or decoding. For webcams common sub-devices are sensors and camera +controllers. + +Usually these are I2C devices, but not necessarily. In order to provide the +driver with a consistent interface to these sub-devices the v4l2_subdev struct +(v4l2-subdev.h) was created. + +Each sub-device driver must have a v4l2_subdev struct. This struct can be +stand-alone for simple sub-devices or it might be embedded in a larger struct +if more state information needs to be stored. Usually there is a low-level +device struct (e.g. i2c_client) that contains the device data as setup +by the kernel. It is recommended to store that pointer in the private +data of v4l2_subdev using v4l2_set_subdevdata(). That makes it easy to go +from a v4l2_subdev to the actual low-level bus-specific device data. + +You also need a way to go from the low-level struct to v4l2_subdev. For the +common i2c_client struct the i2c_set_clientdata() call is used to store a +v4l2_subdev pointer, for other busses you may have to use other methods. + +From the bridge driver perspective you load the sub-device module and somehow +obtain the v4l2_subdev pointer. For i2c devices this is easy: you call +i2c_get_clientdata(). For other busses something similar needs to be done. +Helper functions exists for sub-devices on an I2C bus that do most of this +tricky work for you. + +Each v4l2_subdev contains function pointers that sub-device drivers can +implement (or leave NULL if it is not applicable). Since sub-devices can do +so many different things and you do not want to end up with a huge ops struct +of which only a handful of ops are commonly implemented, the function pointers +are sorted according to category and each category has its own ops struct. + +The top-level ops struct contains pointers to the category ops structs, which +may be NULL if the subdev driver does not support anything from that category. + +It looks like this: + +struct v4l2_subdev_core_ops { + int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_chip_ident *chip); + int (*log_status)(struct v4l2_subdev *sd); + int (*init)(struct v4l2_subdev *sd, u32 val); + ... +}; + +struct v4l2_subdev_tuner_ops { + ... +}; + +struct v4l2_subdev_audio_ops { + ... +}; + +struct v4l2_subdev_video_ops { + ... +}; + +struct v4l2_subdev_ops { + const struct v4l2_subdev_core_ops *core; + const struct v4l2_subdev_tuner_ops *tuner; + const struct v4l2_subdev_audio_ops *audio; + const struct v4l2_subdev_video_ops *video; +}; + +The core ops are common to all subdevs, the other categories are implemented +depending on the sub-device. E.g. a video device is unlikely to support the +audio ops and vice versa. + +This setup limits the number of function pointers while still making it easy +to add new ops and categories. + +A sub-device driver initializes the v4l2_subdev struct using: + + v4l2_subdev_init(subdev, &ops); + +Afterwards you need to initialize subdev->name with a unique name and set the +module owner. This is done for you if you use the i2c helper functions. + +A device (bridge) driver needs to register the v4l2_subdev with the +v4l2_device: + + int err = v4l2_device_register_subdev(device, subdev); + +This can fail if the subdev module disappeared before it could be registered. +After this function was called successfully the subdev->dev field points to +the v4l2_device. + +You can unregister a sub-device using: + + v4l2_device_unregister_subdev(subdev); + +Afterwards the subdev module can be unloaded and subdev->dev == NULL. + +You can call an ops function either directly: + + err = subdev->ops->core->g_chip_ident(subdev, &chip); + +but it is better and easier to use this macro: + + err = v4l2_subdev_call(subdev, core, g_chip_ident, &chip); + +The macro will to the right NULL pointer checks and returns -ENODEV if subdev +is NULL, -ENOIOCTLCMD if either subdev->core or subdev->core->g_chip_ident is +NULL, or the actual result of the subdev->ops->core->g_chip_ident ops. + +It is also possible to call all or a subset of the sub-devices: + + v4l2_device_call_all(dev, 0, core, g_chip_ident, &chip); + +Any subdev that does not support this ops is skipped and error results are +ignored. If you want to check for errors use this: + + err = v4l2_device_call_until_err(dev, 0, core, g_chip_ident, &chip); + +Any error except -ENOIOCTLCMD will exit the loop with that error. If no +errors (except -ENOIOCTLCMD) occured, then 0 is returned. + +The second argument to both calls is a group ID. If 0, then all subdevs are +called. If non-zero, then only those whose group ID match that value will +be called. Before a bridge driver registers a subdev it can set subdev->grp_id +to whatever value it wants (it's 0 by default). This value is owned by the +bridge driver and the sub-device driver will never modify or use it. + +The group ID gives the bridge driver more control how callbacks are called. +For example, there may be multiple audio chips on a board, each capable of +changing the volume. But usually only one will actually be used when the +user want to change the volume. You can set the group ID for that subdev to +e.g. AUDIO_CONTROLLER and specify that as the group ID value when calling +v4l2_device_call_all(). That ensures that it will only go to the subdev +that needs it. + +The advantage of using v4l2_subdev is that it is a generic struct and does +not contain any knowledge about the underlying hardware. So a driver might +contain several subdevs that use an I2C bus, but also a subdev that is +controlled through GPIO pins. This distinction is only relevant when setting +up the device, but once the subdev is registered it is completely transparent. + + +I2C sub-device drivers +---------------------- + +Since these drivers are so common, special helper functions are available to +ease the use of these drivers (v4l2-common.h). + +The recommended method of adding v4l2_subdev support to an I2C driver is to +embed the v4l2_subdev struct into the state struct that is created for each +I2C device instance. Very simple devices have no state struct and in that case +you can just create a v4l2_subdev directly. + +A typical state struct would look like this (where 'chipname' is replaced by +the name of the chip): + +struct chipname_state { + struct v4l2_subdev sd; + ... /* additional state fields */ +}; + +Initialize the v4l2_subdev struct as follows: + + v4l2_i2c_subdev_init(&state->sd, client, subdev_ops); + +This function will fill in all the fields of v4l2_subdev and ensure that the +v4l2_subdev and i2c_client both point to one another. + +You should also add a helper inline function to go from a v4l2_subdev pointer +to a chipname_state struct: + +static inline struct chipname_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct chipname_state, sd); +} + +Use this to go from the v4l2_subdev struct to the i2c_client struct: + + struct i2c_client *client = v4l2_get_subdevdata(sd); + +And this to go from an i2c_client to a v4l2_subdev struct: + + struct v4l2_subdev *sd = i2c_get_clientdata(client); + +Finally you need to make a command function to make driver->command() +call the right subdev_ops functions: + +static int subdev_command(struct i2c_client *client, unsigned cmd, void *arg) +{ + return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg); +} + +If driver->command is never used then you can leave this out. Eventually the +driver->command usage should be removed from v4l. + +Make sure to call v4l2_device_unregister_subdev(sd) when the remove() callback +is called. This will unregister the sub-device from the bridge driver. It is +safe to call this even if the sub-device was never registered. + + +The bridge driver also has some helper functions it can use: + +struct v4l2_subdev *sd = v4l2_i2c_new_subdev(adapter, "module_foo", "chipid", 0x36); + +This loads the given module (can be NULL if no module needs to be loaded) and +calls i2c_new_device() with the given i2c_adapter and chip/address arguments. +If all goes well, then it registers the subdev with the v4l2_device. It gets +the v4l2_device by calling i2c_get_adapdata(adapter), so you should make sure +that adapdata is set to v4l2_device when you setup the i2c_adapter in your +driver. + +You can also use v4l2_i2c_new_probed_subdev() which is very similar to +v4l2_i2c_new_subdev(), except that it has an array of possible I2C addresses +that it should probe. Internally it calls i2c_new_probed_device(). + +Both functions return NULL if something went wrong. + + +struct video_device +------------------- + +Not yet documented. diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 492ab3dce71b..84a2be0cbbe7 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -10,7 +10,7 @@ stkwebcam-objs := stk-webcam.o stk-sensor.o omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o -videodev-objs := v4l2-dev.o v4l2-ioctl.o +videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-subdev.o obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-compat-ioctl32.o v4l2-int-device.o diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c new file mode 100644 index 000000000000..9eefde031597 --- /dev/null +++ b/drivers/media/video/v4l2-device.c @@ -0,0 +1,86 @@ +/* + V4L2 device support. + + Copyright (C) 2008 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +int v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev) +{ + if (dev == NULL || v4l2_dev == NULL) + return -EINVAL; + /* Warn if we apparently re-register a device */ + WARN_ON(dev_get_drvdata(dev)); + INIT_LIST_HEAD(&v4l2_dev->subdevs); + spin_lock_init(&v4l2_dev->lock); + v4l2_dev->dev = dev; + snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "%s %s", + dev->driver->name, dev->bus_id); + dev_set_drvdata(dev, v4l2_dev); + return 0; +} +EXPORT_SYMBOL_GPL(v4l2_device_register); + +void v4l2_device_unregister(struct v4l2_device *v4l2_dev) +{ + struct v4l2_subdev *sd, *next; + + if (v4l2_dev == NULL || v4l2_dev->dev == NULL) + return; + dev_set_drvdata(v4l2_dev->dev, NULL); + /* unregister subdevs */ + list_for_each_entry_safe(sd, next, &v4l2_dev->subdevs, list) + v4l2_device_unregister_subdev(sd); + + v4l2_dev->dev = NULL; +} +EXPORT_SYMBOL_GPL(v4l2_device_unregister); + +int v4l2_device_register_subdev(struct v4l2_device *dev, struct v4l2_subdev *sd) +{ + /* Check for valid input */ + if (dev == NULL || sd == NULL || !sd->name[0]) + return -EINVAL; + /* Warn if we apparently re-register a subdev */ + WARN_ON(sd->dev); + if (!try_module_get(sd->owner)) + return -ENODEV; + sd->dev = dev; + spin_lock(&dev->lock); + list_add_tail(&sd->list, &dev->subdevs); + spin_unlock(&dev->lock); + return 0; +} +EXPORT_SYMBOL_GPL(v4l2_device_register_subdev); + +void v4l2_device_unregister_subdev(struct v4l2_subdev *sd) +{ + /* return if it isn't registered */ + if (sd == NULL || sd->dev == NULL) + return; + spin_lock(&sd->dev->lock); + list_del(&sd->list); + spin_unlock(&sd->dev->lock); + sd->dev = NULL; + module_put(sd->owner); +} +EXPORT_SYMBOL_GPL(v4l2_device_unregister_subdev); diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c new file mode 100644 index 000000000000..fe1f01c970ac --- /dev/null +++ b/drivers/media/video/v4l2-subdev.c @@ -0,0 +1,108 @@ +/* + V4L2 sub-device support. + + Copyright (C) 2008 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg) +{ + switch (cmd) { + case VIDIOC_QUERYCTRL: + return v4l2_subdev_call(sd, core, querymenu, arg); + case VIDIOC_G_CTRL: + return v4l2_subdev_call(sd, core, g_ctrl, arg); + case VIDIOC_S_CTRL: + return v4l2_subdev_call(sd, core, s_ctrl, arg); + case VIDIOC_QUERYMENU: + return v4l2_subdev_call(sd, core, queryctrl, arg); + case VIDIOC_LOG_STATUS: + return v4l2_subdev_call(sd, core, log_status); + case VIDIOC_G_CHIP_IDENT: + return v4l2_subdev_call(sd, core, g_chip_ident, arg); + case VIDIOC_INT_S_STANDBY: + return v4l2_subdev_call(sd, core, s_standby, *(u32 *)arg); + case VIDIOC_INT_RESET: + return v4l2_subdev_call(sd, core, reset, *(u32 *)arg); + case VIDIOC_INT_S_GPIO: + return v4l2_subdev_call(sd, core, s_gpio, *(u32 *)arg); + case VIDIOC_INT_INIT: + return v4l2_subdev_call(sd, core, init, *(u32 *)arg); +#ifdef CONFIG_VIDEO_ADV_DEBUG + case VIDIOC_DBG_G_REGISTER: + return v4l2_subdev_call(sd, core, g_register, arg); + case VIDIOC_DBG_S_REGISTER: + return v4l2_subdev_call(sd, core, s_register, arg); +#endif + + case VIDIOC_INT_S_TUNER_MODE: + return v4l2_subdev_call(sd, tuner, s_mode, *(enum v4l2_tuner_type *)arg); + case AUDC_SET_RADIO: + return v4l2_subdev_call(sd, tuner, s_radio); + case VIDIOC_S_TUNER: + return v4l2_subdev_call(sd, tuner, s_tuner, arg); + case VIDIOC_G_TUNER: + return v4l2_subdev_call(sd, tuner, g_tuner, arg); + case VIDIOC_S_STD: + return v4l2_subdev_call(sd, tuner, s_std, *(v4l2_std_id *)arg); + case VIDIOC_S_FREQUENCY: + return v4l2_subdev_call(sd, tuner, s_frequency, arg); + case VIDIOC_G_FREQUENCY: + return v4l2_subdev_call(sd, tuner, g_frequency, arg); + case TUNER_SET_TYPE_ADDR: + return v4l2_subdev_call(sd, tuner, s_type_addr, arg); + case TUNER_SET_CONFIG: + return v4l2_subdev_call(sd, tuner, s_config, arg); + + case VIDIOC_INT_AUDIO_CLOCK_FREQ: + return v4l2_subdev_call(sd, audio, s_clock_freq, *(u32 *)arg); + case VIDIOC_INT_S_AUDIO_ROUTING: + return v4l2_subdev_call(sd, audio, s_routing, arg); + case VIDIOC_INT_I2S_CLOCK_FREQ: + return v4l2_subdev_call(sd, audio, s_i2s_clock_freq, *(u32 *)arg); + + case VIDIOC_INT_S_VIDEO_ROUTING: + return v4l2_subdev_call(sd, video, s_routing, arg); + case VIDIOC_INT_S_CRYSTAL_FREQ: + return v4l2_subdev_call(sd, video, s_crystal_freq, arg); + case VIDIOC_INT_DECODE_VBI_LINE: + return v4l2_subdev_call(sd, video, decode_vbi_line, arg); + case VIDIOC_INT_S_VBI_DATA: + return v4l2_subdev_call(sd, video, s_vbi_data, arg); + case VIDIOC_INT_G_VBI_DATA: + return v4l2_subdev_call(sd, video, g_vbi_data, arg); + case VIDIOC_S_FMT: + return v4l2_subdev_call(sd, video, s_fmt, arg); + case VIDIOC_G_FMT: + return v4l2_subdev_call(sd, video, g_fmt, arg); + case VIDIOC_INT_S_STD_OUTPUT: + return v4l2_subdev_call(sd, video, s_std_output, *(v4l2_std_id *)arg); + case VIDIOC_STREAMON: + return v4l2_subdev_call(sd, video, s_stream, 1); + case VIDIOC_STREAMOFF: + return v4l2_subdev_call(sd, video, s_stream, 0); + + default: + return v4l2_subdev_call(sd, core, ioctl, cmd, arg); + } +} +EXPORT_SYMBOL_GPL(v4l2_subdev_command); diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h new file mode 100644 index 000000000000..97b283a04289 --- /dev/null +++ b/include/media/v4l2-device.h @@ -0,0 +1,109 @@ +/* + V4L2 device support header. + + Copyright (C) 2008 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _V4L2_DEVICE_H +#define _V4L2_DEVICE_H + +#include + +/* Each instance of a V4L2 device should create the v4l2_device struct, + either stand-alone or embedded in a larger struct. + + It allows easy access to sub-devices (see v4l2-subdev.h) and provides + basic V4L2 device-level support. + */ + +#define V4L2_DEVICE_NAME_SIZE (BUS_ID_SIZE + 16) + +struct v4l2_device { + /* dev->driver_data points to this struct */ + struct device *dev; + /* used to keep track of the registered subdevs */ + struct list_head subdevs; + /* lock this struct; can be used by the driver as well if this + struct is embedded into a larger struct. */ + spinlock_t lock; + /* unique device name, by default the driver name + bus ID */ + char name[V4L2_DEVICE_NAME_SIZE]; +}; + +/* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev */ +int __must_check v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev); +/* Set v4l2_dev->dev->driver_data to NULL and unregister all sub-devices */ +void v4l2_device_unregister(struct v4l2_device *v4l2_dev); + +/* Register a subdev with a v4l2 device. While registered the subdev module + is marked as in-use. An error is returned if the module is no longer + loaded when you attempt to register it. */ +int __must_check v4l2_device_register_subdev(struct v4l2_device *dev, struct v4l2_subdev *sd); +/* Unregister a subdev with a v4l2 device. Can also be called if the subdev + wasn't registered. In that case it will do nothing. */ +void v4l2_device_unregister_subdev(struct v4l2_subdev *sd); + +/* Iterate over all subdevs. */ +#define v4l2_device_for_each_subdev(sd, dev) \ + list_for_each_entry(sd, &(dev)->subdevs, list) + +/* Call the specified callback for all subdevs matching the condition. + Ignore any errors. Note that you cannot add or delete a subdev + while walking the subdevs list. */ +#define __v4l2_device_call_subdevs(dev, cond, o, f, args...) \ + do { \ + struct v4l2_subdev *sd; \ + \ + list_for_each_entry(sd, &(dev)->subdevs, list) \ + if ((cond) && sd->ops->o && sd->ops->o->f) \ + sd->ops->o->f(sd , ##args); \ + } while (0) + +/* Call the specified callback for all subdevs matching the condition. + If the callback returns an error other than 0 or -ENOIOCTLCMD, then + return with that error code. Note that you cannot add or delete a + subdev while walking the subdevs list. */ +#define __v4l2_device_call_subdevs_until_err(dev, cond, o, f, args...) \ +({ \ + struct v4l2_subdev *sd; \ + int err = 0; \ + \ + list_for_each_entry(sd, &(dev)->subdevs, list) { \ + if ((cond) && sd->ops->o && sd->ops->o->f) \ + err = sd->ops->o->f(sd , ##args); \ + if (err && err != -ENOIOCTLCMD) \ + break; \ + } \ + (err == -ENOIOCTLCMD) ? 0 : err; \ +}) + +/* Call the specified callback for all subdevs matching grp_id (if 0, then + match them all). Ignore any errors. Note that you cannot add or delete + a subdev while walking the subdevs list. */ +#define v4l2_device_call_all(dev, grp_id, o, f, args...) \ + __v4l2_device_call_subdevs(dev, \ + !(grp_id) || sd->grp_id == (grp_id), o, f , ##args) + +/* Call the specified callback for all subdevs matching grp_id (if 0, then + match them all). If the callback returns an error other than 0 or + -ENOIOCTLCMD, then return with that error code. Note that you cannot + add or delete a subdev while walking the subdevs list. */ +#define v4l2_device_call_until_err(dev, grp_id, o, f, args...) \ + __v4l2_device_call_subdevs_until_err(dev, \ + !(grp_id) || sd->grp_id == (grp_id), o, f , ##args) + +#endif diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h new file mode 100644 index 000000000000..bc9e0fbf2822 --- /dev/null +++ b/include/media/v4l2-subdev.h @@ -0,0 +1,188 @@ +/* + V4L2 sub-device support header. + + Copyright (C) 2008 Hans Verkuil + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _V4L2_SUBDEV_H +#define _V4L2_SUBDEV_H + +#include + +struct v4l2_device; +struct v4l2_subdev; +struct tuner_setup; + +/* Sub-devices are devices that are connected somehow to the main bridge + device. These devices are usually audio/video muxers/encoders/decoders or + sensors and webcam controllers. + + Usually these devices are controlled through an i2c bus, but other busses + may also be used. + + The v4l2_subdev struct provides a way of accessing these devices in a + generic manner. Most operations that these sub-devices support fall in + a few categories: core ops, audio ops, video ops and tuner ops. + + More categories can be added if needed, although this should remain a + limited set (no more than approx. 8 categories). + + Each category has its own set of ops that subdev drivers can implement. + + A subdev driver can leave the pointer to the category ops NULL if + it does not implement them (e.g. an audio subdev will generally not + implement the video category ops). The exception is the core category: + this must always be present. + + These ops are all used internally so it is no problem to change, remove + or add ops or move ops from one to another category. Currently these + ops are based on the original ioctls, but since ops are not limited to + one argument there is room for improvement here once all i2c subdev + drivers are converted to use these ops. + */ + +/* Core ops: it is highly recommended to implement at least these ops: + + g_chip_ident + log_status + g_register + s_register + + This provides basic debugging support. + + The ioctl ops is meant for generic ioctl-like commands. Depending on + the use-case it might be better to use subdev-specific ops (currently + not yet implemented) since ops provide proper type-checking. + */ +struct v4l2_subdev_core_ops { + int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_chip_ident *chip); + int (*log_status)(struct v4l2_subdev *sd); + int (*init)(struct v4l2_subdev *sd, u32 val); + int (*s_standby)(struct v4l2_subdev *sd, u32 standby); + int (*reset)(struct v4l2_subdev *sd, u32 val); + int (*s_gpio)(struct v4l2_subdev *sd, u32 val); + int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc); + int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl); + int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl); + int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm); + int (*ioctl)(struct v4l2_subdev *sd, int cmd, void *arg); +#ifdef CONFIG_VIDEO_ADV_DEBUG + int (*g_register)(struct v4l2_subdev *sd, struct v4l2_register *reg); + int (*s_register)(struct v4l2_subdev *sd, struct v4l2_register *reg); +#endif +}; + +struct v4l2_subdev_tuner_ops { + int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type); + int (*s_radio)(struct v4l2_subdev *sd); + int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); + int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); + int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); + int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); + int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm); + int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type); + int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config); +}; + +struct v4l2_subdev_audio_ops { + int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq); + int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq); + int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route); +}; + +struct v4l2_subdev_video_ops { + int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route); + int (*s_crystal_freq)(struct v4l2_subdev *sd, struct v4l2_crystal_freq *freq); + int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line); + int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data); + int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data); + int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std); + int (*s_stream)(struct v4l2_subdev *sd, int enable); + int (*s_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt); + int (*g_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt); +}; + +struct v4l2_subdev_ops { + const struct v4l2_subdev_core_ops *core; + const struct v4l2_subdev_tuner_ops *tuner; + const struct v4l2_subdev_audio_ops *audio; + const struct v4l2_subdev_video_ops *video; +}; + +#define V4L2_SUBDEV_NAME_SIZE 32 + +/* Each instance of a subdev driver should create this struct, either + stand-alone or embedded in a larger struct. + */ +struct v4l2_subdev { + struct list_head list; + struct module *owner; + struct v4l2_device *dev; + const struct v4l2_subdev_ops *ops; + /* name must be unique */ + char name[V4L2_SUBDEV_NAME_SIZE]; + /* can be used to group similar subdevs, value is driver-specific */ + u32 grp_id; + /* pointer to private data */ + void *priv; +}; + +static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p) +{ + sd->priv = p; +} + +static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd) +{ + return sd->priv; +} + +/* Convert an ioctl-type command to the proper v4l2_subdev_ops function call. + This is used by subdev modules that can be called by both old-style ioctl + commands and through the v4l2_subdev_ops. + + The ioctl API of the subdev driver can call this function to call the + right ops based on the ioctl cmd and arg. + + Once all subdev drivers have been converted and all drivers no longer + use the ioctl interface, then this function can be removed. + */ +int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg); + +static inline void v4l2_subdev_init(struct v4l2_subdev *sd, + const struct v4l2_subdev_ops *ops) +{ + INIT_LIST_HEAD(&sd->list); + /* ops->core MUST be set */ + BUG_ON(!ops || !ops->core); + sd->ops = ops; + sd->dev = NULL; + sd->name[0] = '\0'; + sd->grp_id = 0; + sd->priv = NULL; +} + +/* Call an ops of a v4l2_subdev, doing the right checks against + NULL pointers. + + Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip); + */ +#define v4l2_subdev_call(sd, o, f, args...) \ + (!(sd) ? -ENODEV : (((sd) && (sd)->ops->o && (sd)->ops->o->f) ? \ + (sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD)) + +#endif -- cgit v1.2.3 From 3319dc98a742d445a660268a6ce3426ad0922e2a Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 1 Dec 2008 14:44:02 -0300 Subject: V4L/DVB (9848): gspca: Webcam 06f8:3004 added in sonixj. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/sonixj.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 4c96adc0ba5b..8d0210b24039 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -171,6 +171,7 @@ sunplus 06d6:0031 Trust 610 LCD PowerC@m Zoom spca506 06e1:a190 ADS Instant VCD ov534 06f8:3002 Hercules Blog Webcam ov534 06f8:3003 Hercules Dualpix HD Weblog +sonixj 06f8:3004 Hercules Classic Silver spca508 0733:0110 ViewQuest VQ110 spca508 0130:0130 Clone Digital Webcam 11043 spca501 0733:0401 Intel Create and Share diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 504976960ce1..698f200df233 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1730,6 +1730,7 @@ static const __devinitdata struct usb_device_id device_table[] = { #endif {USB_DEVICE(0x0471, 0x0328), BSI(SN9C105, MI0360, 0x5d)}, {USB_DEVICE(0x0471, 0x0330), BSI(SN9C105, MI0360, 0x5d)}, + {USB_DEVICE(0x06f8, 0x3004), BSI(SN9C105, OV7660, 0x21)}, {USB_DEVICE(0x0c45, 0x6040), BSI(SN9C102P, HV7131R, 0x11)}, /* bw600.inf: {USB_DEVICE(0x0c45, 0x6040), BSI(SN9C102P, MI0360, 0x5d)}, */ -- cgit v1.2.3 From d7bb7317d4caca55de72e5bd2229d68ed7cce7af Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Tue, 2 Dec 2008 06:56:47 -0300 Subject: V4L/DVB (9849): gspca: Add the webcam 0c45:613a in the gspca documentation. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 8d0210b24039..acf6c9f8e76d 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -257,6 +257,7 @@ sonixj 0c45:612a Avant Camera sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix sonixj 0c45:6130 Sonix Pccam sonixj 0c45:6138 Sn9c120 Mo4000 +sonixj 0c45:613a Microdia Sonix PC Camera sonixj 0c45:613b Surfer SN-206 sonixj 0c45:613c Sonix Pccam168 sonixj 0c45:6143 Sonix Pccam168 -- cgit v1.2.3 From 121520a7084b48cb26437c6e89d4b491c3e4d4d5 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Dec 2008 07:19:22 -0300 Subject: V4L/DVB (9853): gspca: Webcam 093a:2622 added in pac7311. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac7311.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index acf6c9f8e76d..72d31bd649ca 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -217,6 +217,7 @@ pac7311 093a:2608 Trust WB-3300p pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 pac7311 093a:260f SnakeCam pac7311 093a:2621 PAC731x +pac7311 093a:2622 Genius Eye 312 pac7311 093a:2624 PAC7302 pac7311 093a:2626 Labtec 2200 pac7311 093a:262a Webcam 300k diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index fbd45e235d97..80c5975c8fe0 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -1065,6 +1065,7 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x260e), .driver_info = SENSOR_PAC7311}, {USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311}, {USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302}, + {USB_DEVICE(0x093a, 0x2622), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x262a), .driver_info = SENSOR_PAC7302}, -- cgit v1.2.3 From a9da98a4336df020e5f089b963295373c6c3e6b9 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Dec 2008 07:29:26 -0300 Subject: V4L/DVB (9854): gspca: Add the webcam 0c45:60fe in the gspca documentation. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 72d31bd649ca..a38c87246dad 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -253,6 +253,7 @@ sonixj 0c45:60c0 Sangha Sn535 sonixj 0c45:60ec SN9C105+MO4000 sonixj 0c45:60fb Surfer NoName sonixj 0c45:60fc LG-LIC300 +sonixj 0c45:60fe Microdia Audio sonixj 0c45:6128 Microdia/Sonix SNP325 sonixj 0c45:612a Avant Camera sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix -- cgit v1.2.3 From 8852153548b31abb99c1c0772d03f92054f1f80d Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 10 Dec 2008 05:06:13 -0300 Subject: V4L/DVB (9870): gspca - vc032x: Webcam 15b8:6002 and sensor po1200 added. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/vc032x.c | 319 +++++++++++++++++++++++++++++++++++- 2 files changed, 312 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index a38c87246dad..81d7d891c15f 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -271,6 +271,7 @@ spca561 10fd:7e50 FlyCam Usb 100 zc3xx 10fd:8050 Typhoon Webshot II USB 300k ov534 1415:2000 Sony HD Eye for PS3 (SLEH 00201) pac207 145f:013a Trust WB-1300N +vc032x 15b8:6002 HP 2.0 Megapixel rz406aa spca501 1776:501c Arowana 300K CMOS Camera t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index 9ac66c9b558b..b1ab37e12220 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -47,7 +47,8 @@ struct sd { #define SENSOR_MI1310_SOC 3 #define SENSOR_OV7660 4 #define SENSOR_OV7670 5 -#define SENSOR_PO3130NC 6 +#define SENSOR_PO1200 6 +#define SENSOR_PO3130NC 7 }; /* V4L2 controls supported by the driver */ @@ -132,6 +133,14 @@ static struct v4l2_pix_format vc0323_mode[] = { .priv = 0}, }; +static struct v4l2_pix_format svga_mode[] = { + {800, 600, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 800, + .sizeimage = 800 * 600 * 1 / 4 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; + /* OV7660/7670 registers */ #define OV7660_REG_MVFP 0x1e #define OV7660_MVFP_MIRROR 0x20 @@ -1466,6 +1475,281 @@ static const __u8 ov7670_initQVGA_JPG[][4] = { {0x00, 0x77, 0x05, 0xaa }, {}, }; + +/* PO1200 - values from usbvm326.inf and ms-win trace */ +static const __u8 po1200_gamma[17] = { + 0x00, 0x13, 0x38, 0x59, 0x79, 0x92, 0xa7, 0xb9, 0xc8, + 0xd4, 0xdf, 0xe7, 0xee, 0xf4, 0xf9, 0xfc, 0xff +}; +static const __u8 po1200_matrix[9] = { + 0x60, 0xf9, 0xe5, 0xe7, 0x50, 0x05, 0xf3, 0xe6, 0x5e +}; +static const __u8 po1200_initVGA_data[][4] = { + {0xb0, 0x03, 0x19, 0xcc}, /* reset? */ + {0xb0, 0x03, 0x19, 0xcc}, +/* {0x00, 0x00, 0x33, 0xdd}, */ + {0xb0, 0x04, 0x02, 0xcc}, + {0xb0, 0x02, 0x02, 0xcc}, + {0xb3, 0x5d, 0x00, 0xcc}, + {0xb3, 0x01, 0x01, 0xcc}, + {0xb3, 0x00, 0x64, 0xcc}, + {0xb3, 0x00, 0x65, 0xcc}, + {0xb3, 0x05, 0x01, 0xcc}, + {0xb3, 0x06, 0x01, 0xcc}, + {0xb3, 0x5c, 0x01, 0xcc}, + {0xb3, 0x08, 0x01, 0xcc}, + {0xb3, 0x09, 0x0c, 0xcc}, + {0xb3, 0x00, 0x67, 0xcc}, + {0xb3, 0x02, 0xb2, 0xcc}, + {0xb3, 0x03, 0x18, 0xcc}, + {0xb3, 0x04, 0x15, 0xcc}, + {0xb3, 0x20, 0x00, 0xcc}, + {0xb3, 0x21, 0x00, 0xcc}, + {0xb3, 0x22, 0x02, 0xcc}, + {0xb3, 0x23, 0x58, 0xcc}, + {0xb3, 0x14, 0x00, 0xcc}, + {0xb3, 0x15, 0x00, 0xcc}, + {0xb3, 0x16, 0x03, 0xcc}, + {0xb3, 0x17, 0x1f, 0xcc}, + {0xbc, 0x00, 0x71, 0xcc}, + {0xbc, 0x01, 0x01, 0xcc}, + {0xb0, 0x54, 0x13, 0xcc}, + {0xb3, 0x00, 0x67, 0xcc}, + {0xb3, 0x34, 0x01, 0xcc}, + {0xb3, 0x35, 0xdc, 0xcc}, + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0x12, 0x05, 0xaa}, + {0x00, 0x13, 0x02, 0xaa}, + {0x00, 0x1e, 0xc6, 0xaa}, + {0x00, 0x21, 0x00, 0xaa}, + {0x00, 0x25, 0x02, 0xaa}, + {0x00, 0x3c, 0x4f, 0xaa}, + {0x00, 0x3f, 0xe0, 0xaa}, + {0x00, 0x42, 0xff, 0xaa}, + {0x00, 0x45, 0x34, 0xaa}, + {0x00, 0x55, 0xfe, 0xaa}, + {0x00, 0x59, 0xd3, 0xaa}, + {0x00, 0x5e, 0x04, 0xaa}, + {0x00, 0x61, 0xb8, 0xaa}, + {0x00, 0x62, 0x02, 0xaa}, + {0x00, 0xa7, 0x31, 0xaa}, + {0x00, 0xa9, 0x66, 0xaa}, + {0x00, 0xb0, 0x00, 0xaa}, + {0x00, 0xb1, 0x00, 0xaa}, + {0x00, 0xb3, 0x11, 0xaa}, + {0x00, 0xb6, 0x26, 0xaa}, + {0x00, 0xb7, 0x20, 0xaa}, + {0x00, 0xba, 0x04, 0xaa}, + {0x00, 0x88, 0x42, 0xaa}, + {0x00, 0x89, 0x9a, 0xaa}, + {0x00, 0x8a, 0x88, 0xaa}, + {0x00, 0x8b, 0x8e, 0xaa}, + {0x00, 0x8c, 0x3e, 0xaa}, + {0x00, 0x8d, 0x90, 0xaa}, + {0x00, 0x8e, 0x87, 0xaa}, + {0x00, 0x8f, 0x96, 0xaa}, + {0x00, 0x90, 0x3d, 0xaa}, + {0x00, 0x64, 0x00, 0xaa}, + {0x00, 0x65, 0x10, 0xaa}, + {0x00, 0x66, 0x20, 0xaa}, + {0x00, 0x67, 0x2b, 0xaa}, + {0x00, 0x68, 0x36, 0xaa}, + {0x00, 0x69, 0x49, 0xaa}, + {0x00, 0x6a, 0x5a, 0xaa}, + {0x00, 0x6b, 0x7f, 0xaa}, + {0x00, 0x6c, 0x9b, 0xaa}, + {0x00, 0x6d, 0xba, 0xaa}, + {0x00, 0x6e, 0xd4, 0xaa}, + {0x00, 0x6f, 0xea, 0xaa}, + {0x00, 0x70, 0x00, 0xaa}, + {0x00, 0x71, 0x10, 0xaa}, + {0x00, 0x72, 0x20, 0xaa}, + {0x00, 0x73, 0x2b, 0xaa}, + {0x00, 0x74, 0x36, 0xaa}, + {0x00, 0x75, 0x49, 0xaa}, + {0x00, 0x76, 0x5a, 0xaa}, + {0x00, 0x77, 0x7f, 0xaa}, + {0x00, 0x78, 0x9b, 0xaa}, + {0x00, 0x79, 0xba, 0xaa}, + {0x00, 0x7a, 0xd4, 0xaa}, + {0x00, 0x7b, 0xea, 0xaa}, + {0x00, 0x7c, 0x00, 0xaa}, + {0x00, 0x7d, 0x10, 0xaa}, + {0x00, 0x7e, 0x20, 0xaa}, + {0x00, 0x7f, 0x2b, 0xaa}, + {0x00, 0x80, 0x36, 0xaa}, + {0x00, 0x81, 0x49, 0xaa}, + {0x00, 0x82, 0x5a, 0xaa}, + {0x00, 0x83, 0x7f, 0xaa}, + {0x00, 0x84, 0x9b, 0xaa}, + {0x00, 0x85, 0xba, 0xaa}, + {0x00, 0x86, 0xd4, 0xaa}, + {0x00, 0x87, 0xea, 0xaa}, + {0x00, 0x57, 0x2a, 0xaa}, + {0x00, 0x03, 0x01, 0xaa}, + {0x00, 0x04, 0x10, 0xaa}, + {0x00, 0x05, 0x10, 0xaa}, + {0x00, 0x06, 0x10, 0xaa}, + {0x00, 0x07, 0x10, 0xaa}, + {0x00, 0x08, 0x13, 0xaa}, + {0x00, 0x0a, 0x00, 0xaa}, + {0x00, 0x0b, 0x10, 0xaa}, + {0x00, 0x0c, 0x20, 0xaa}, + {0x00, 0x0d, 0x18, 0xaa}, + {0x00, 0x22, 0x01, 0xaa}, + {0x00, 0x23, 0x60, 0xaa}, + {0x00, 0x25, 0x08, 0xaa}, + {0x00, 0x26, 0x82, 0xaa}, + {0x00, 0x2e, 0x0f, 0xaa}, + {0x00, 0x2f, 0x1e, 0xaa}, + {0x00, 0x30, 0x2d, 0xaa}, + {0x00, 0x31, 0x3c, 0xaa}, + {0x00, 0x32, 0x4b, 0xaa}, + {0x00, 0x33, 0x5a, 0xaa}, + {0x00, 0x34, 0x69, 0xaa}, + {0x00, 0x35, 0x78, 0xaa}, + {0x00, 0x36, 0x87, 0xaa}, + {0x00, 0x37, 0x96, 0xaa}, + {0x00, 0x38, 0xa5, 0xaa}, + {0x00, 0x39, 0xb4, 0xaa}, + {0x00, 0x3a, 0xc3, 0xaa}, + {0x00, 0x3b, 0xd2, 0xaa}, + {0x00, 0x3c, 0xe1, 0xaa}, + {0x00, 0x3e, 0xff, 0xaa}, + {0x00, 0x3f, 0xff, 0xaa}, + {0x00, 0x40, 0xff, 0xaa}, + {0x00, 0x41, 0xff, 0xaa}, + {0x00, 0x42, 0xff, 0xaa}, + {0x00, 0x43, 0xff, 0xaa}, + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0x20, 0xc4, 0xaa}, + {0x00, 0x13, 0x03, 0xaa}, + {0x00, 0x3c, 0x50, 0xaa}, + {0x00, 0x61, 0x6a, 0xaa}, + {0x00, 0x51, 0x5b, 0xaa}, + {0x00, 0x52, 0x91, 0xaa}, + {0x00, 0x53, 0x4c, 0xaa}, + {0x00, 0x54, 0x50, 0xaa}, + {0x00, 0x56, 0x02, 0xaa}, + {0xb6, 0x00, 0x00, 0xcc}, + {0xb6, 0x03, 0x03, 0xcc}, + {0xb6, 0x02, 0x20, 0xcc}, + {0xb6, 0x05, 0x02, 0xcc}, + {0xb6, 0x04, 0x58, 0xcc}, + {0xb6, 0x12, 0xf8, 0xcc}, + {0xb6, 0x13, 0x21, 0xcc}, + {0xb6, 0x18, 0x03, 0xcc}, + {0xb6, 0x17, 0xa9, 0xcc}, + {0xb6, 0x16, 0x80, 0xcc}, + {0xb6, 0x22, 0x12, 0xcc}, + {0xb6, 0x23, 0x0b, 0xcc}, + {0xbf, 0xc0, 0x39, 0xcc}, + {0xbf, 0xc1, 0x04, 0xcc}, + {0xbf, 0xcc, 0x00, 0xcc}, + {0xb8, 0x06, 0x20, 0xcc}, + {0xb8, 0x07, 0x03, 0xcc}, + {0xb8, 0x08, 0x58, 0xcc}, + {0xb8, 0x09, 0x02, 0xcc}, + {0xb3, 0x01, 0x41, 0xcc}, + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0xd9, 0x0f, 0xaa}, + {0x00, 0xda, 0xaa, 0xaa}, + {0x00, 0xd9, 0x10, 0xaa}, + {0x00, 0xda, 0xaa, 0xaa}, + {0x00, 0xd9, 0x11, 0xaa}, + {0x00, 0xda, 0x00, 0xaa}, + {0x00, 0xd9, 0x12, 0xaa}, + {0x00, 0xda, 0xff, 0xaa}, + {0x00, 0xd9, 0x13, 0xaa}, + {0x00, 0xda, 0xff, 0xaa}, + {0x00, 0xe8, 0x11, 0xaa}, + {0x00, 0xe9, 0x12, 0xaa}, + {0x00, 0xea, 0x5c, 0xaa}, + {0x00, 0xeb, 0xff, 0xaa}, + {0x00, 0xd8, 0x80, 0xaa}, + {0x00, 0xe6, 0x02, 0xaa}, + {0x00, 0xd6, 0x40, 0xaa}, + {0x00, 0xe3, 0x05, 0xaa}, + {0x00, 0xe0, 0x40, 0xaa}, + {0x00, 0xde, 0x03, 0xaa}, + {0x00, 0xdf, 0x03, 0xaa}, + {0x00, 0xdb, 0x02, 0xaa}, + {0x00, 0xdc, 0x00, 0xaa}, + {0x00, 0xdd, 0x03, 0xaa}, + {0x00, 0xe1, 0x08, 0xaa}, + {0x00, 0xe2, 0x01, 0xaa}, + {0x00, 0xd6, 0x40, 0xaa}, + {0x00, 0xe4, 0x40, 0xaa}, + {0x00, 0xa8, 0x9f, 0xaa}, + {0x00, 0xb4, 0x16, 0xaa}, + {0xb0, 0x02, 0x06, 0xcc}, + {0xb0, 0x18, 0x06, 0xcc}, + {0xb0, 0x19, 0x06, 0xcc}, + {0xb3, 0x5d, 0x18, 0xcc}, + {0xb3, 0x05, 0x00, 0xcc}, + {0xb3, 0x06, 0x00, 0xcc}, + {0x00, 0xb4, 0x0e, 0xaa}, + {0x00, 0xb5, 0x49, 0xaa}, + {0x00, 0xb6, 0x1c, 0xaa}, + {0x00, 0xb7, 0x96, 0xaa}, +/* end of usbvm326.inf - start of ms-win trace */ + {0xb6, 0x12, 0xf8, 0xcc}, + {0xb6, 0x13, 0x3d, 0xcc}, +/*read b306*/ + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0x1a, 0x09, 0xaa}, + {0x00, 0x1b, 0x8a, 0xaa}, +/*read b827*/ + {0xb8, 0x27, 0x00, 0xcc}, + {0xb8, 0x26, 0x60, 0xcc}, + {0xb8, 0x26, 0x60, 0xcc}, +/*gamma - to do?*/ + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0xae, 0x84, 0xaa}, +/*gamma again*/ + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0x96, 0xa0, 0xaa}, +/*matrix*/ + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0x91, 0x35, 0xaa}, + {0x00, 0x92, 0x22, 0xaa}, +/*gamma*/ + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0x95, 0x85, 0xaa}, +/*matrix*/ + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0x61, 0xb8, 0xaa}, + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0x4d, 0x20, 0xaa}, + {0xb8, 0x22, 0x40, 0xcc}, + {0xb8, 0x23, 0x40, 0xcc}, + {0xb8, 0x24, 0x40, 0xcc}, + {0xb8, 0x81, 0x09, 0xcc}, + {0x00, 0x00, 0x64, 0xdd}, + {0x00, 0x03, 0x01, 0xaa}, +/*read 46*/ + {0x00, 0x46, 0x3c, 0xaa}, + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0x16, 0x40, 0xaa}, + {0x00, 0x17, 0x40, 0xaa}, + {0x00, 0x18, 0x40, 0xaa}, + {0x00, 0x19, 0x41, 0xaa}, + {0x00, 0x03, 0x01, 0xaa}, + {0x00, 0x46, 0x3c, 0xaa}, + {0x00, 0x00, 0x18, 0xdd}, +/*read bfff*/ + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0x1e, 0x46, 0xaa}, + {0x00, 0xa8, 0x8f, 0xaa}, + {0x00, 0x03, 0x00, 0xaa}, + {0x00, 0xb4, 0x1c, 0xaa}, + {0x00, 0xb5, 0x92, 0xaa}, + {0x00, 0xb6, 0x39, 0xaa}, + {0x00, 0xb7, 0x24, 0xaa}, +/*write 89 0400 1415*/ +}; + struct sensor_info { int sensorId; __u8 I2cAdd; @@ -1486,6 +1770,7 @@ static const struct sensor_info sensor_info_data[] = { {SENSOR_MI1310_SOC, 0x80 | 0x5d, 0x00, 0x143a, 0x24, 0x25, 0x01}, /* (tested in vc032x_probe_sensor) */ /* {SENSOR_MI0360, 0x80 | 0x5d, 0x00, 0x8243, 0x24, 0x25, 0x01}, */ + {SENSOR_PO1200, 0x80 | 0x5c, 0x00, 0x1200, 0x67, 0x67, 0x01}, }; /* read 'len' bytes in gspca_dev->usb_buf */ @@ -1709,6 +1994,9 @@ static int sd_config(struct gspca_dev *gspca_dev, case SENSOR_OV7670: PDEBUG(D_PROBE, "Find Sensor OV7670"); break; + case SENSOR_PO1200: + PDEBUG(D_PROBE, "Find Sensor PO1200"); + break; case SENSOR_PO3130NC: PDEBUG(D_PROBE, "Find Sensor PO3130NC"); break; @@ -1719,8 +2007,13 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->cam_mode = vc0321_mode; cam->nmodes = ARRAY_SIZE(vc0321_mode); } else { - cam->cam_mode = vc0323_mode; - cam->nmodes = ARRAY_SIZE(vc0323_mode); + if (sensor != SENSOR_PO1200) { + cam->cam_mode = vc0323_mode; + cam->nmodes = ARRAY_SIZE(vc0323_mode); + } else { + cam->cam_mode = svga_mode; + cam->nmodes = ARRAY_SIZE(svga_mode); + } } sd->qindex = 7; @@ -1888,6 +2181,11 @@ static int sd_start(struct gspca_dev *gspca_dev) } usb_exchange(gspca_dev, po3130_rundata); break; + case SENSOR_PO1200: + GammaT = po1200_gamma; + MatrixT = po1200_matrix; + usb_exchange(gspca_dev, po1200_initVGA_data); + break; default: PDEBUG(D_PROBE, "Damned !! no sensor found Bye"); return -EMEDIUMTYPE; @@ -1920,11 +2218,15 @@ static int sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev->dev, 0xa0, 0x23, 0xb800); * ISP CTRL_BAS */ /* set the led on 0x0892 0x0896 */ - reg_w(gspca_dev->dev, 0x89, 0xffff, 0xfdff); - msleep(100); - setquality(gspca_dev); - sethvflip(gspca_dev); - setlightfreq(gspca_dev); + if (sd->sensor != SENSOR_PO1200) { + reg_w(gspca_dev->dev, 0x89, 0xffff, 0xfdff); + msleep(100); + setquality(gspca_dev); + sethvflip(gspca_dev); + setlightfreq(gspca_dev); + } else { + reg_w(gspca_dev->dev, 0x89, 0x0400, 0x1415); + } } return 0; } @@ -2071,6 +2373,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0ac8, 0x0328), .driver_info = BRIDGE_VC0321}, {USB_DEVICE(0x0ac8, 0xc001), .driver_info = BRIDGE_VC0321}, {USB_DEVICE(0x0ac8, 0xc002), .driver_info = BRIDGE_VC0321}, + {USB_DEVICE(0x15b8, 0x6002), .driver_info = BRIDGE_VC0323}, {USB_DEVICE(0x17ef, 0x4802), .driver_info = BRIDGE_VC0323}, {} }; -- cgit v1.2.3 From c665f4dd99a584036c2bd79a6baa25b06cae42f8 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Tue, 16 Dec 2008 23:35:23 -0300 Subject: V4L/DVB (9922): em28xx: don't assume every eb1a:2820 reference design is a Prolink PlayTV USB2 Don't operate under the assumption that every device that uses the em2820 default USB ID is a Prolink PlayTV USB. We have an eeprom hash, so use that, since otherwise we cannot support other devices with the 2820 default USB ID (such as the ADS Tech Instant TV USB USBAV-704) Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 4 ++-- drivers/media/video/em28xx/em28xx-cards.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index a6734eb7bf7b..0c4c721daba9 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -1,5 +1,5 @@ 0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800] - 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] + 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] 2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036] 3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208] 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201] @@ -12,7 +12,7 @@ 11 -> Terratec Hybrid XS (em2880) [0ccd:0042] 12 -> Kworld PVR TV 2800 RF (em2820/em2840) 13 -> Terratec Prodigy XS (em2880) [0ccd:0047] - 14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) [eb1a:2821] + 14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) 15 -> V-Gear PocketTV (em2800) 16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b] 17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227] diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 4b78a03528f5..e5d9424d03f9 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1246,7 +1246,7 @@ struct usb_device_id em28xx_id_table [] = { { USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2821), - .driver_info = EM2820_BOARD_PROLINK_PLAYTV_USB2 }, + .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2860), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2861), -- cgit v1.2.3 From a47ddf1425554ca0b1e9b16b20a9d631e5daaaa8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 19 Dec 2008 10:20:22 -0300 Subject: V4L/DVB (9943): v4l2: document video_device. Add the missing video_device documentation to v4l2-framework.txt. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/v4l2-framework.txt | 160 ++++++++++++++++++++++++++- 1 file changed, 159 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 60eaf54e7eff..eeae76c22a93 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -86,6 +86,9 @@ to v4l2_dev. Registration will also set v4l2_dev->name to a value derived from dev (driver name followed by the bus_id, to be precise). You may change the name after registration if you want. +The first 'dev' argument is normally the struct device pointer of a pci_dev, +usb_device or platform_device. + You unregister with: v4l2_device_unregister(struct v4l2_device *v4l2_dev); @@ -359,4 +362,159 @@ Both functions return NULL if something went wrong. struct video_device ------------------- -Not yet documented. +The actual device nodes in the /dev directory are created using the +video_device struct (v4l2-dev.h). This struct can either be allocated +dynamically or embedded in a larger struct. + +To allocate it dynamically use: + + struct video_device *vdev = video_device_alloc(); + + if (vdev == NULL) + return -ENOMEM; + + vdev->release = video_device_release; + +If you embed it in a larger struct, then you must set the release() +callback to your own function: + + struct video_device *vdev = &my_vdev->vdev; + + vdev->release = my_vdev_release; + +The release callback must be set and it is called when the last user +of the video device exits. + +The default video_device_release() callback just calls kfree to free the +allocated memory. + +You should also set these fields: + +- parent: set to the parent device (same device as was used to register + v4l2_device). +- name: set to something descriptive and unique. +- fops: set to the file_operations struct. +- ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance + (highly recommended to use this and it might become compulsory in the + future!), then set this to your v4l2_ioctl_ops struct. + +If you use v4l2_ioctl_ops, then you should set .unlocked_ioctl to +__video_ioctl2 or .ioctl to video_ioctl2 in your file_operations struct. + + +video_device registration +------------------------- + +Next you register the video device: this will create the character device +for you. + + err = video_register_device(vdev, VFL_TYPE_GRABBER, -1); + if (err) { + video_device_release(vdev); // or kfree(my_vdev); + return err; + } + +Which device is registered depends on the type argument. The following +types exist: + +VFL_TYPE_GRABBER: videoX for video input/output devices +VFL_TYPE_VBI: vbiX for vertical blank data (i.e. closed captions, teletext) +VFL_TYPE_RADIO: radioX for radio tuners +VFL_TYPE_VTX: vtxX for teletext devices (deprecated, don't use) + +The last argument gives you a certain amount of control over the device +kernel number used (i.e. the X in videoX). Normally you will pass -1 to +let the v4l2 framework pick the first free number. But if a driver creates +many devices, then it can be useful to have different video devices in +separate ranges. For example, video capture devices start at 0, video +output devices start at 16. + +So you can use the last argument to specify a minimum kernel number and +the v4l2 framework will try to pick the first free number that is equal +or higher to what you passed. If that fails, then it will just pick the +first free number. + +Whenever a device node is created some attributes are also created for you. +If you look in /sys/class/video4linux you see the devices. Go into e.g. +video0 and you will see 'name' and 'index' attributes. The 'name' attribute +is the 'name' field of the video_device struct. The 'index' attribute is +a device node index that can be assigned by the driver, or that is calculated +for you. + +If you call video_register_device(), then the index is just increased by +1 for each device node you register. The first video device node you register +always starts off with 0. + +Alternatively you can call video_register_device_index() which is identical +to video_register_device(), but with an extra index argument. Here you can +pass a specific index value (between 0 and 31) that should be used. + +Users can setup udev rules that utilize the index attribute to make fancy +device names (e.g. 'mpegX' for MPEG video capture device nodes). + +After the device was successfully registered, then you can use these fields: + +- vfl_type: the device type passed to video_register_device. +- minor: the assigned device minor number. +- num: the device kernel number (i.e. the X in videoX). +- index: the device index number (calculated or set explicitly using + video_register_device_index). + +If the registration failed, then you need to call video_device_release() +to free the allocated video_device struct, or free your own struct if the +video_device was embedded in it. The vdev->release() callback will never +be called if the registration failed, nor should you ever attempt to +unregister the device if the registration failed. + + +video_device cleanup +-------------------- + +When the video device nodes have to be removed, either during the unload +of the driver or because the USB device was disconnected, then you should +unregister them: + + video_unregister_device(vdev); + +This will remove the device nodes from sysfs (causing udev to remove them +from /dev). + +After video_unregister_device() returns no new opens can be done. + +However, in the case of USB devices some application might still have one +of these device nodes open. You should block all new accesses to read, +write, poll, etc. except possibly for certain ioctl operations like +queueing buffers. + +When the last user of the video device node exits, then the vdev->release() +callback is called and you can do the final cleanup there. + + +video_device helper functions +----------------------------- + +There are a few useful helper functions: + +You can set/get driver private data in the video_device struct using: + +void *video_get_drvdata(struct video_device *dev); +void video_set_drvdata(struct video_device *dev, void *data); + +Note that you can safely call video_set_drvdata() before calling +video_register_device(). + +And this function: + +struct video_device *video_devdata(struct file *file); + +returns the video_device belonging to the file struct. + +The final helper function combines video_get_drvdata with +video_devdata: + +void *video_drvdata(struct file *file); + +You can go from a video_device struct to the v4l2_device struct using: + +struct v4l2_device *v4l2_dev = dev_get_drvdata(vdev->parent); + -- cgit v1.2.3 From ca8959bb07f27514f811200b4f71669b1783dc54 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 15 Dec 2008 04:12:57 -0300 Subject: V4L/DVB (9984): gspca - pac7311: Webcam 093a:262c added. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac7311.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 81d7d891c15f..a5545945648d 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -221,6 +221,7 @@ pac7311 093a:2622 Genius Eye 312 pac7311 093a:2624 PAC7302 pac7311 093a:2626 Labtec 2200 pac7311 093a:262a Webcam 300k +pac7311 093a:262c Philips SPC 230 NC zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 vc032x 0ac8:0323 Vimicro Vc0323 diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 80c5975c8fe0..80af367bd350 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -1069,6 +1069,7 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x262a), .driver_info = SENSOR_PAC7302}, + {USB_DEVICE(0x093a, 0x262c), .driver_info = SENSOR_PAC7302}, {} }; MODULE_DEVICE_TABLE(usb, device_table); -- cgit v1.2.3 From 87945895bf14b0b4dacbcef6dc08f284177affc8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 20 Dec 2008 14:30:58 -0300 Subject: V4L/DVB (9992): gspca - pac207: Webcam 093a:2461 added. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 3 ++- drivers/media/video/gspca/pac207.c | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index a5545945648d..ec00740e6c40 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -202,7 +202,8 @@ sunplus 08ca:2050 Medion MD 41437 sunplus 08ca:2060 Aiptek PocketDV5300 tv8532 0923:010f ICM532 cams mars 093a:050f Mars-Semi Pc-Camera -pac207 093a:2460 PAC207 Qtec Webcam 100 +pac207 093a:2460 Qtec Webcam 100 +pac207 093a:2461 HP Webcam pac207 093a:2463 Philips SPC 220 NC pac207 093a:2464 Labtec Webcam 1200 pac207 093a:2468 PAC207 diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index 84bcaaf4d325..e46b8e8f0a7e 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -529,6 +529,7 @@ static const struct sd_desc sd_desc = { static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x4028)}, {USB_DEVICE(0x093a, 0x2460)}, + {USB_DEVICE(0x093a, 0x2461)}, {USB_DEVICE(0x093a, 0x2463)}, {USB_DEVICE(0x093a, 0x2464)}, {USB_DEVICE(0x093a, 0x2468)}, -- cgit v1.2.3 From 88a40cfbf25d82758237250a04d9bed51266215c Mon Sep 17 00:00:00 2001 From: Fabio Rossi Date: Fri, 26 Dec 2008 14:41:48 -0300 Subject: V4L/DVB (9999): gspca - zc3xx: Webcam 046d:089d added. Signed-off-by: Fabio Rossi Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/zc3xx.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index ec00740e6c40..f34155f33a24 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -53,6 +53,7 @@ zc3xx 0461:0a00 MicroInnovation WebCam320 spca500 046d:0890 Logitech QuickCam traveler vc032x 046d:0892 Logitech Orbicam vc032x 046d:0896 Logitech Orbicam +zc3xx 046d:089d Logitech QuickCam E2500 zc3xx 046d:08a0 Logitech QC IM zc3xx 046d:08a1 Logitech QC IM 0x08A1 +sound zc3xx 046d:08a2 Labtec Webcam Pro diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index a62c8ac7b4a2..8ded9e6e8a7a 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -7533,6 +7533,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0458, 0x700c)}, {USB_DEVICE(0x0458, 0x700f)}, {USB_DEVICE(0x0461, 0x0a00)}, + {USB_DEVICE(0x046d, 0x089d), .driver_info = SENSOR_MC501CB}, {USB_DEVICE(0x046d, 0x08a0)}, {USB_DEVICE(0x046d, 0x08a1)}, {USB_DEVICE(0x046d, 0x08a2)}, -- cgit v1.2.3 From 71d50f30724c901c3d8cc7a19bdb3c33e1ee5463 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 27 Dec 2008 03:43:53 -0300 Subject: V4L/DVB (10044): gspca - pac7311: Webcam 093a:2620 added. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac7311.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index f34155f33a24..5daf2c801671 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -218,6 +218,7 @@ pac7311 093a:2603 PAC7312 pac7311 093a:2608 Trust WB-3300p pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 pac7311 093a:260f SnakeCam +pac7311 093a:2620 Apollo AC-905 pac7311 093a:2621 PAC731x pac7311 093a:2622 Genius Eye 312 pac7311 093a:2624 PAC7302 diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 80af367bd350..1b72e15cb3ae 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -1064,6 +1064,7 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2608), .driver_info = SENSOR_PAC7311}, {USB_DEVICE(0x093a, 0x260e), .driver_info = SENSOR_PAC7311}, {USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311}, + {USB_DEVICE(0x093a, 0x2620), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2622), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302}, -- cgit v1.2.3 From 4c98834addfee3fdd42c505c37569261bf669d94 Mon Sep 17 00:00:00 2001 From: Erik Andren Date: Mon, 29 Dec 2008 07:35:23 -0300 Subject: V4L/DVB (10048): gspca - stv06xx: New subdriver. Signed-off-by: Erik Andren Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 3 + drivers/media/video/gspca/Kconfig | 1 + drivers/media/video/gspca/Makefile | 2 +- drivers/media/video/gspca/stv06xx/Kconfig | 9 + drivers/media/video/gspca/stv06xx/Makefile | 6 + drivers/media/video/gspca/stv06xx/stv06xx.c | 522 ++++++++++++++++++++ drivers/media/video/gspca/stv06xx/stv06xx.h | 107 +++++ drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c | 533 +++++++++++++++++++++ drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h | 263 ++++++++++ drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c | 430 +++++++++++++++++ drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h | 275 +++++++++++ drivers/media/video/gspca/stv06xx/stv06xx_sensor.h | 92 ++++ drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c | 251 ++++++++++ drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h | 315 ++++++++++++ 14 files changed, 2808 insertions(+), 1 deletion(-) create mode 100644 drivers/media/video/gspca/stv06xx/Kconfig create mode 100644 drivers/media/video/gspca/stv06xx/Makefile create mode 100644 drivers/media/video/gspca/stv06xx/stv06xx.c create mode 100644 drivers/media/video/gspca/stv06xx/stv06xx.h create mode 100644 drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c create mode 100644 drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h create mode 100644 drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c create mode 100644 drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h create mode 100644 drivers/media/video/gspca/stv06xx/stv06xx_sensor.h create mode 100644 drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c create mode 100644 drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 5daf2c801671..f54281d78c12 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -50,6 +50,9 @@ ov519 045e:028c Micro$oft xbox cam spca508 0461:0815 Micro Innovation IC200 sunplus 0461:0821 Fujifilm MV-1 zc3xx 0461:0a00 MicroInnovation WebCam320 +stv06xx 046d:0840 QuickCam Express +stv06xx 046d:0850 LEGO cam / QuickCam Web +stv06xx 046d:0870 Dexxa WebCam USB spca500 046d:0890 Logitech QuickCam traveler vc032x 046d:0892 Logitech Orbicam vc032x 046d:0896 Logitech Orbicam diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 770fb699d048..ee6a691dff22 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -18,6 +18,7 @@ menuconfig USB_GSPCA if USB_GSPCA && VIDEO_V4L2 source "drivers/media/video/gspca/m5602/Kconfig" +source "drivers/media/video/gspca/stv06xx/Kconfig" config USB_GSPCA_CONEX tristate "Conexant Camera Driver" diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index 6c8046e232c7..bd8d9ee40504 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -47,4 +47,4 @@ gspca_vc032x-objs := vc032x.o gspca_zc3xx-objs := zc3xx.o obj-$(CONFIG_USB_M5602) += m5602/ - +obj-$(CONFIG_USB_STV06XX) += stv06xx/ diff --git a/drivers/media/video/gspca/stv06xx/Kconfig b/drivers/media/video/gspca/stv06xx/Kconfig new file mode 100644 index 000000000000..634ad38d9fb8 --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/Kconfig @@ -0,0 +1,9 @@ +config USB_STV06XX + tristate "STV06XX USB Camera Driver" + depends on USB_GSPCA + help + Say Y here if you want support for cameras based on + the ST STV06XX chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_stv06xx. diff --git a/drivers/media/video/gspca/stv06xx/Makefile b/drivers/media/video/gspca/stv06xx/Makefile new file mode 100644 index 000000000000..8f002b6233b2 --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_USB_STV06XX) += gspca_stv06xx.o + +gspca_stv06xx-objs := stv06xx.o \ + stv06xx_vv6410.o \ + stv06xx_hdcs.o \ + stv06xx_pb0100.o diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c new file mode 100644 index 000000000000..29e43718bfdf --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -0,0 +1,522 @@ +/* + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * Copyright (c) 2008 Erik Andrén + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * P/N 861037: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express + * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam + * P/N 861075-0040: Sensor HDCS1000 ASIC + * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB + * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web + */ + +#include "stv06xx_sensor.h" + +MODULE_AUTHOR("Erik Andrén"); +MODULE_DESCRIPTION("STV06XX USB Camera Driver"); +MODULE_LICENSE("GPL"); + +int dump_bridge; +int dump_sensor; + +int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data) +{ + int err; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + u8 len = (i2c_data > 0xff) ? 2 : 1; + + buf[0] = i2c_data & 0xff; + buf[1] = (i2c_data >> 8) & 0xff; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, address, 0, buf, len, + STV06XX_URB_MSG_TIMEOUT); + + + PDEBUG(D_CONF, "Written 0x%x to address 0x%x, status: %d", + i2c_data, address, err); + + return (err < 0) ? err : 0; +} + +int stv06xx_read_bridge(struct sd *sd, u16 address, u8 *i2c_data) +{ + int err; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x04, 0xc0, address, 0, buf, 1, + STV06XX_URB_MSG_TIMEOUT); + + *i2c_data = buf[0]; + + PDEBUG(D_CONF, "Read 0x%x from address 0x%x, status %d", + *i2c_data, address, err); + + return (err < 0) ? err : 0; +} + +/* Wraps the normal write sensor bytes / words functions for writing a + single value */ +int stv06xx_write_sensor(struct sd *sd, u8 address, u16 value) +{ + if (sd->sensor->i2c_len == 2) { + u16 data[2] = { address, value }; + return stv06xx_write_sensor_words(sd, data, 1); + } else { + u8 data[2] = { address, value }; + return stv06xx_write_sensor_bytes(sd, data, 1); + } +} + +static int stv06xx_write_sensor_finish(struct sd *sd) +{ + int err = 0; + + if (IS_850(sd)) { + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + /* Quickam Web needs an extra packet */ + buf[0] = 0; + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x1704, 0, buf, 1, + STV06XX_URB_MSG_TIMEOUT); + } + + return (err < 0) ? err : 0; +} + +int stv06xx_write_sensor_bytes(struct sd *sd, const u8 *data, u8 len) +{ + int err, i, j; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + PDEBUG(D_USBO, "I2C: Command buffer contains %d entries", len); + for (i = 0; i < len;) { + /* Build the command buffer */ + memset(buf, 0, I2C_BUFFER_LENGTH); + for (j = 0; j < I2C_MAX_BYTES && i < len; j++, i++) { + buf[j] = data[2*i]; + buf[0x10 + j] = data[2*i+1]; + PDEBUG(D_USBO, "I2C: Writing 0x%02x to reg 0x%02x", + data[2*i+1], data[2*i]); + } + buf[0x20] = sd->sensor->i2c_addr; + buf[0x21] = j - 1; /* Number of commands to send - 1 */ + buf[0x22] = I2C_WRITE_CMD; + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x0400, 0, buf, + I2C_BUFFER_LENGTH, + STV06XX_URB_MSG_TIMEOUT); + if (err < 0) + return err; + } + return stv06xx_write_sensor_finish(sd); +} + +int stv06xx_write_sensor_words(struct sd *sd, const u16 *data, u8 len) +{ + int err, i, j; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + PDEBUG(D_USBO, "I2C: Command buffer contains %d entries", len); + + for (i = 0; i < len;) { + /* Build the command buffer */ + memset(buf, 0, I2C_BUFFER_LENGTH); + for (j = 0; j < I2C_MAX_WORDS && i < len; j++, i++) { + buf[j] = data[2*i]; + buf[0x10 + j * 2] = data[2*i+1]; + buf[0x10 + j * 2 + 1] = data[2*i+1] >> 8; + PDEBUG(D_USBO, "I2C: Writing 0x%04x to reg 0x%02x", + data[2*i+1], data[2*i]); + } + buf[0x20] = sd->sensor->i2c_addr; + buf[0x21] = j - 1; /* Number of commands to send - 1 */ + buf[0x22] = I2C_WRITE_CMD; + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x0400, 0, buf, + I2C_BUFFER_LENGTH, + STV06XX_URB_MSG_TIMEOUT); + if (err < 0) + return err; + } + return stv06xx_write_sensor_finish(sd); +} + +int stv06xx_read_sensor(struct sd *sd, const u8 address, u16 *value) +{ + int err; + struct usb_device *udev = sd->gspca_dev.dev; + __u8 *buf = sd->gspca_dev.usb_buf; + + err = stv06xx_write_bridge(sd, STV_I2C_FLUSH, sd->sensor->i2c_flush); + if (err < 0) + return err; + + /* Clear mem */ + memset(buf, 0, I2C_BUFFER_LENGTH); + + buf[0] = address; + buf[0x20] = sd->sensor->i2c_addr; + buf[0x21] = 0; + + /* Read I2C register */ + buf[0x22] = I2C_READ_CMD; + + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x04, 0x40, 0x1400, 0, buf, I2C_BUFFER_LENGTH, + STV06XX_URB_MSG_TIMEOUT); + if (err < 0) { + PDEBUG(D_ERR, "I2C Read: error writing address: %d", err); + return err; + } + + err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x04, 0xc0, 0x1410, 0, buf, sd->sensor->i2c_len, + STV06XX_URB_MSG_TIMEOUT); + if (sd->sensor->i2c_len == 2) + *value = buf[0] | (buf[1] << 8); + else + *value = buf[0]; + + PDEBUG(D_USBO, "I2C: Read 0x%x from address 0x%x, status: %d", + *value, address, err); + + return (err < 0) ? err : 0; +} + +/* Dumps all bridge registers */ +static void stv06xx_dump_bridge(struct sd *sd) +{ + int i; + u8 data, buf; + + info("Dumping all stv06xx bridge registers"); + for (i = 0x1400; i < 0x160f; i++) { + stv06xx_read_bridge(sd, i, &data); + + info("Read 0x%x from address 0x%x", data, i); + } + + for (i = 0x1400; i < 0x160f; i++) { + stv06xx_read_bridge(sd, i, &data); + buf = data; + + stv06xx_write_bridge(sd, i, 0xff); + stv06xx_read_bridge(sd, i, &data); + if (data == 0xff) + info("Register 0x%x is read/write", i); + else if (data != buf) + info("Register 0x%x is read/write," + "but only partially", i); + else + info("Register 0x%x is read-only", i); + + stv06xx_write_bridge(sd, i, buf); + } +} + +/* this function is called at probe and resume time */ +static int stv06xx_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int err; + + PDEBUG(D_PROBE, "Initializing camera"); + + /* Let the usb init settle for a bit + before performing the initialization */ + msleep(250); + + err = sd->sensor->init(sd); + + if (dump_sensor) + sd->sensor->dump(sd); + + return (err < 0) ? err : 0; +} + +/* Start the camera */ +static int stv06xx_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int err; + + /* Prepare the sensor for start */ + err = sd->sensor->start(sd); + if (err < 0) + goto out; + + /* Start isochronous streaming */ + err = stv06xx_write_bridge(sd, STV_ISO_ENABLE, 1); + +out: + if (err < 0) + PDEBUG(D_STREAM, "Starting stream failed"); + else + PDEBUG(D_STREAM, "Started streaming"); + + return (err < 0) ? err : 0; +} + +static void stv06xx_stopN(struct gspca_dev *gspca_dev) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + + /* stop ISO-streaming */ + err = stv06xx_write_bridge(sd, STV_ISO_ENABLE, 0); + if (err < 0) + goto out; + + err = sd->sensor->stop(sd); + if (err < 0) + goto out; + +out: + if (err < 0) + PDEBUG(D_STREAM, "Failed to stop stream"); + else + PDEBUG(D_STREAM, "Stopped streaming"); +} + +/* + * Analyse an USB packet of the data stream and store it appropriately. + * Each packet contains an integral number of chunks. Each chunk has + * 2-bytes identification, followed by 2-bytes that describe the chunk + * length. Known/guessed chunk identifications are: + * 8001/8005/C001/C005 - Begin new frame + * 8002/8006/C002/C006 - End frame + * 0200/4200 - Contains actual image data, bayer or compressed + * 0005 - 11 bytes of unknown data + * 0100 - 2 bytes of unknown data + * The 0005 and 0100 chunks seem to appear only in compressed stream. + */ +static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + __u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + PDEBUG(D_PACK, "Packet of length %d arrived", len); + + /* A packet may contain several frames + loop until the whole packet is reached */ + while (len) { + int id, chunk_len; + + if (len < 4) { + PDEBUG(D_PACK, "Packet is smaller than 4 bytes"); + return; + } + + /* Capture the id */ + id = (data[0] << 8) | data[1]; + + /* Capture the chunk length */ + chunk_len = (data[2] << 8) | data[3]; + PDEBUG(D_PACK, "Chunk id: %x, length: %d", id, chunk_len); + + data += 4; + len -= 4; + + if (len < chunk_len) { + PDEBUG(D_ERR, "URB packet length is smaller" + " than the specified chunk length"); + return; + } + + switch (id) { + case 0x0200: + case 0x4200: + PDEBUG(D_PACK, "Frame data packet detected"); + + gspca_frame_add(gspca_dev, INTER_PACKET, frame, + data, chunk_len); + break; + + case 0x8001: + case 0x8005: + case 0xc001: + case 0xc005: + PDEBUG(D_PACK, "Starting new frame"); + + /* Create a new frame, chunk length should be zero */ + gspca_frame_add(gspca_dev, FIRST_PACKET, + frame, data, 0); + + if (chunk_len) + PDEBUG(D_ERR, "Chunk length is " + "non-zero on a SOF"); + break; + + case 0x8002: + case 0x8006: + case 0xc002: + PDEBUG(D_PACK, "End of frame detected"); + + /* Complete the last frame (if any) */ + gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + + if (chunk_len) + PDEBUG(D_ERR, "Chunk length is " + "non-zero on a EOF"); + break; + + case 0x0005: + PDEBUG(D_PACK, "Chunk 0x005 detected"); + /* Unknown chunk with 11 bytes of data, + occurs just before end of each frame + in compressed mode */ + break; + + case 0x0100: + PDEBUG(D_PACK, "Chunk 0x0100 detected"); + /* Unknown chunk with 2 bytes of data, + occurs 2-3 times per USB interrupt */ + break; + default: + PDEBUG(D_PACK, "Unknown chunk %d detected", id); + /* Unknown chunk */ + } + data += chunk_len; + len -= chunk_len; + } +} + +static int stv06xx_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id); + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .config = stv06xx_config, + .init = stv06xx_init, + .start = stv06xx_start, + .stopN = stv06xx_stopN, + .pkt_scan = stv06xx_pkt_scan +}; + +/* This function is called at probe time */ +static int stv06xx_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam; + + PDEBUG(D_PROBE, "Configuring camera"); + + cam = &gspca_dev->cam; + cam->epaddr = STV_ISOC_ENDPOINT_ADDR; + sd->desc = sd_desc; + gspca_dev->sd_desc = &sd->desc; + + if (dump_bridge) + stv06xx_dump_bridge(sd); + + sd->sensor = &stv06xx_sensor_vv6410; + if (!sd->sensor->probe(sd)) + return 0; + + sd->sensor = &stv06xx_sensor_hdcs1x00; + if (!sd->sensor->probe(sd)) + return 0; + + sd->sensor = &stv06xx_sensor_hdcs1020; + if (!sd->sensor->probe(sd)) + return 0; + + sd->sensor = &stv06xx_sensor_pb0100; + if (!sd->sensor->probe(sd)) + return 0; + + sd->sensor = NULL; + return -ENODEV; +} + + + +/* -- module initialisation -- */ +static const __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x046d, 0x0840)}, /* QuickCam Express */ + {USB_DEVICE(0x046d, 0x0850)}, /* LEGO cam / QuickCam Web */ + {USB_DEVICE(0x046d, 0x0870)}, /* Dexxa WebCam USB */ + {} +}; +MODULE_DEVICE_TABLE(usb, device_table); + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + PDEBUG(D_PROBE, "Probing for a stv06xx device"); + return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), + THIS_MODULE); +} + +void sd_disconnect(struct usb_interface *intf) +{ + struct gspca_dev *gspca_dev = usb_get_intfdata(intf); + struct sd *sd = (struct sd *) gspca_dev; + PDEBUG(D_PROBE, "Disconnecting the stv06xx device"); + + if (sd->sensor->disconnect) + sd->sensor->disconnect(sd); + gspca_disconnect(intf); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = sd_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + if (usb_register(&sd_driver) < 0) + return -1; + PDEBUG(D_PROBE, "registered"); + return 0; +} +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); + PDEBUG(D_PROBE, "deregistered"); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); + +module_param(dump_bridge, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dump_bridge, "Dumps all usb bridge registers at startup"); + +module_param(dump_sensor, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dump_sensor, "Dumps all sensor registers at startup"); diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.h b/drivers/media/video/gspca/stv06xx/stv06xx.h new file mode 100644 index 000000000000..1207e7d17f14 --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/stv06xx.h @@ -0,0 +1,107 @@ +/* + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * Copyright (c) 2008 Erik Andrén + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * P/N 861037: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express + * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam + * P/N 861075-0040: Sensor HDCS1000 ASIC + * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB + * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web + */ + +#ifndef STV06XX_H_ +#define STV06XX_H_ + +#include "gspca.h" + +#define MODULE_NAME "STV06xx" + +#define STV_ISOC_ENDPOINT_ADDR 0x81 + +#ifndef V4L2_PIX_FMT_SGRBG8 +#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') +#endif + +#define STV_REG23 0x0423 + +/* Control registers of the STV0600 ASIC */ +#define STV_I2C_PARTNER 0x1420 +#define STV_I2C_VAL_REG_VAL_PAIRS_MIN1 0x1421 +#define STV_I2C_READ_WRITE_TOGGLE 0x1422 +#define STV_I2C_FLUSH 0x1423 +#define STV_I2C_SUCC_READ_REG_VALS 0x1424 + +#define STV_ISO_ENABLE 0x1440 +#define STV_SCAN_RATE 0x1443 +#define STV_LED_CTRL 0x1445 +#define STV_STV0600_EMULATION 0x1446 +#define STV_REG00 0x1500 +#define STV_REG01 0x1501 +#define STV_REG02 0x1502 +#define STV_REG03 0x1503 +#define STV_REG04 0x1504 + +#define STV_ISO_SIZE_L 0x15c1 +#define STV_ISO_SIZE_H 0x15c2 + +/* Refers to the CIF 352x288 and QCIF 176x144 */ +/* 1: 288 lines, 2: 144 lines */ +#define STV_Y_CTRL 0x15c3 + +/* 0xa: 352 columns, 0x6: 176 columns */ +#define STV_X_CTRL 0x1680 + +#define STV06XX_URB_MSG_TIMEOUT 5000 + +#define I2C_MAX_BYTES 16 +#define I2C_MAX_WORDS 8 + +#define I2C_BUFFER_LENGTH 0x23 +#define I2C_READ_CMD 3 +#define I2C_WRITE_CMD 1 + +#define LED_ON 1 +#define LED_OFF 0 + +/* STV06xx device descriptor */ +struct sd { + struct gspca_dev gspca_dev; + + /* A pointer to the currently connected sensor */ + const struct stv06xx_sensor *sensor; + + /* A pointer to the sd_desc struct */ + struct sd_desc desc; + + /* Sensor private data */ + void *sensor_priv; +}; + +int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data); +int stv06xx_read_bridge(struct sd *sd, u16 address, u8 *i2c_data); + +int stv06xx_write_sensor_bytes(struct sd *sd, const u8 *data, u8 len); +int stv06xx_write_sensor_words(struct sd *sd, const u16 *data, u8 len); + +int stv06xx_read_sensor(struct sd *sd, const u8 address, u16 *value); +int stv06xx_write_sensor(struct sd *sd, u8 address, u16 value); + +#endif diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c new file mode 100644 index 000000000000..1cfe58504553 --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c @@ -0,0 +1,533 @@ +/* + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * Copyright (c) 2008 Erik Andrén + * Copyright (c) 2008 Chia-I Wu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * P/N 861037: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express + * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam + * P/N 861075-0040: Sensor HDCS1000 ASIC + * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB + * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web + */ + +#include "stv06xx_hdcs.h" + +enum hdcs_power_state { + HDCS_STATE_SLEEP, + HDCS_STATE_IDLE, + HDCS_STATE_RUN +}; + +/* no lock? */ +struct hdcs { + enum hdcs_power_state state; + int w, h; + + /* visible area of the sensor array */ + struct { + int left, top; + int width, height; + int border; + } array; + + struct { + /* Column timing overhead */ + u8 cto; + /* Column processing overhead */ + u8 cpo; + /* Row sample period constant */ + u16 rs; + /* Exposure reset duration */ + u16 er; + } exp; + + int psmp; +}; + +static int hdcs_reg_write_seq(struct sd *sd, u8 reg, u8 *vals, u8 len) +{ + u8 regs[I2C_MAX_BYTES * 2]; + int i; + + if (unlikely((len <= 0) || (len >= I2C_MAX_BYTES) || + (reg + len > 0xff))) + return -EINVAL; + + for (i = 0; i < len; i++, reg++) { + regs[2*i] = reg; + regs[2*i+1] = vals[i]; + } + + return stv06xx_write_sensor_bytes(sd, regs, len); +} + +static int hdcs_set_state(struct sd *sd, enum hdcs_power_state state) +{ + struct hdcs *hdcs = sd->sensor_priv; + u8 val; + int ret; + + if (hdcs->state == state) + return 0; + + /* we need to go idle before running or sleeping */ + if (hdcs->state != HDCS_STATE_IDLE) { + ret = stv06xx_write_sensor(sd, HDCS_REG_CONTROL(sd), 0); + if (ret) + return ret; + } + + hdcs->state = HDCS_STATE_IDLE; + + if (state == HDCS_STATE_IDLE) + return 0; + + switch (state) { + case HDCS_STATE_SLEEP: + val = HDCS_SLEEP_MODE; + break; + + case HDCS_STATE_RUN: + val = HDCS_RUN_ENABLE; + break; + + default: + return -EINVAL; + } + + ret = stv06xx_write_sensor(sd, HDCS_REG_CONTROL(sd), val); + if (ret < 0) + hdcs->state = state; + + return ret; +} + +static int hdcs_reset(struct sd *sd) +{ + struct hdcs *hdcs = sd->sensor_priv; + int err; + + err = stv06xx_write_sensor(sd, HDCS_REG_CONTROL(sd), 1); + if (err < 0) + return err; + + err = stv06xx_write_sensor(sd, HDCS_REG_CONTROL(sd), 0); + if (err < 0) + hdcs->state = HDCS_STATE_IDLE; + + return err; +} + +static int hdcs_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct hdcs *hdcs = sd->sensor_priv; + + /* Column time period */ + int ct; + /* Column processing period */ + int cp; + /* Row processing period */ + int rp; + int cycles; + int err; + int rowexp; + u16 data[2]; + + err = stv06xx_read_sensor(sd, HDCS_ROWEXPL, &data[0]); + if (err < 0) + return err; + + err = stv06xx_read_sensor(sd, HDCS_ROWEXPH, &data[1]); + if (err < 0) + return err; + + rowexp = (data[1] << 8) | data[0]; + + ct = hdcs->exp.cto + hdcs->psmp + (HDCS_ADC_START_SIG_DUR + 2); + cp = hdcs->exp.cto + (hdcs->w * ct / 2); + rp = hdcs->exp.rs + cp; + + cycles = rp * rowexp; + *val = cycles / HDCS_CLK_FREQ_MHZ; + PDEBUG(D_V4L2, "Read exposure %d", *val); + return 0; +} + +static int hdcs_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct hdcs *hdcs = sd->sensor_priv; + int rowexp, srowexp; + int max_srowexp; + /* Column time period */ + int ct; + /* Column processing period */ + int cp; + /* Row processing period */ + int rp; + /* Minimum number of column timing periods + within the column processing period */ + int mnct; + int cycles, err; + u8 exp[4]; + + cycles = val * HDCS_CLK_FREQ_MHZ; + + ct = hdcs->exp.cto + hdcs->psmp + (HDCS_ADC_START_SIG_DUR + 2); + cp = hdcs->exp.cto + (hdcs->w * ct / 2); + + /* the cycles one row takes */ + rp = hdcs->exp.rs + cp; + + rowexp = cycles / rp; + + /* the remaining cycles */ + cycles -= rowexp * rp; + + /* calculate sub-row exposure */ + if (IS_1020(sd)) { + /* see HDCS-1020 datasheet 3.5.6.4, p. 63 */ + srowexp = hdcs->w - (cycles + hdcs->exp.er + 13) / ct; + + mnct = (hdcs->exp.er + 12 + ct - 1) / ct; + max_srowexp = hdcs->w - mnct; + } else { + /* see HDCS-1000 datasheet 3.4.5.5, p. 61 */ + srowexp = cp - hdcs->exp.er - 6 - cycles; + + mnct = (hdcs->exp.er + 5 + ct - 1) / ct; + max_srowexp = cp - mnct * ct - 1; + } + + if (srowexp < 0) + srowexp = 0; + else if (srowexp > max_srowexp) + srowexp = max_srowexp; + + if (IS_1020(sd)) { + exp[0] = rowexp & 0xff; + exp[1] = rowexp >> 8; + exp[2] = (srowexp >> 2) & 0xff; + /* this clears exposure error flag */ + exp[3] = 0x1; + err = hdcs_reg_write_seq(sd, HDCS_ROWEXPL, exp, 4); + } else { + exp[0] = rowexp & 0xff; + exp[1] = rowexp >> 8; + exp[2] = srowexp & 0xff; + exp[3] = srowexp >> 8; + err = hdcs_reg_write_seq(sd, HDCS_ROWEXPL, exp, 4); + if (err < 0) + return err; + + /* clear exposure error flag */ + err = stv06xx_write_sensor(sd, + HDCS_STATUS, BIT(4)); + } + PDEBUG(D_V4L2, "Writing exposure %d, rowexp %d, srowexp %d", + val, rowexp, srowexp); + return err; +} + +static int hdcs_set_gains(struct sd *sd, u8 r, u8 g, u8 b) +{ + u8 gains[4]; + + /* the voltage gain Av = (1 + 19 * val / 127) * (1 + bit7) */ + if (r > 127) + r = 0x80 | (r / 2); + if (g > 127) + g = 0x80 | (g / 2); + if (b > 127) + b = 0x80 | (b / 2); + + gains[0] = g; + gains[1] = r; + gains[2] = b; + gains[3] = g; + + return hdcs_reg_write_seq(sd, HDCS_ERECPGA, gains, 4); +} + +static int hdcs_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + int err; + u16 data; + + err = stv06xx_read_sensor(sd, HDCS_ERECPGA, &data); + + /* Bit 7 doubles the gain */ + if (data & 0x80) + *val = (data & 0x7f) * 2; + else + *val = data; + + PDEBUG(D_V4L2, "Read gain %d", *val); + return err; +} + +static int hdcs_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + PDEBUG(D_V4L2, "Writing gain %d", val); + return hdcs_set_gains((struct sd *) gspca_dev, + val & 0xff, val & 0xff, val & 0xff); +} + +static int hdcs_set_size(struct sd *sd, + unsigned int width, unsigned int height) +{ + struct hdcs *hdcs = sd->sensor_priv; + u8 win[4]; + unsigned int x, y; + int err; + + /* must be multiple of 4 */ + width = (width + 3) & ~0x3; + height = (height + 3) & ~0x3; + + if (width > hdcs->array.width) + width = hdcs->array.width; + + if (IS_1020(sd)) { + /* the borders are also invalid */ + if (height + 2 * hdcs->array.border + HDCS_1020_BOTTOM_Y_SKIP + > hdcs->array.height) + height = hdcs->array.height - 2 * hdcs->array.border - + HDCS_1020_BOTTOM_Y_SKIP; + + y = (hdcs->array.height - HDCS_1020_BOTTOM_Y_SKIP - height) / 2 + + hdcs->array.top; + } else if (height > hdcs->array.height) { + height = hdcs->array.height; + y = hdcs->array.top + (hdcs->array.height - height) / 2; + } + + x = hdcs->array.left + (hdcs->array.width - width) / 2; + + win[0] = y / 4; + win[1] = x / 4; + win[2] = (y + height) / 4 - 1; + win[3] = (x + width) / 4 - 1; + + err = hdcs_reg_write_seq(sd, HDCS_FWROW, win, 4); + if (err < 0) + return err; + + /* Update the current width and height */ + hdcs->w = width; + hdcs->h = height; + return err; +} + +static int hdcs_probe_1x00(struct sd *sd) +{ + struct hdcs *hdcs; + u16 sensor; + int ret; + + ret = stv06xx_read_sensor(sd, HDCS_IDENT, &sensor); + if (ret < 0 || sensor != 0x08) + return -ENODEV; + + info("HDCS-1000/1100 sensor detected"); + + sd->gspca_dev.cam.cam_mode = stv06xx_sensor_hdcs1x00.modes; + sd->gspca_dev.cam.nmodes = stv06xx_sensor_hdcs1x00.nmodes; + sd->desc.ctrls = stv06xx_sensor_hdcs1x00.ctrls; + sd->desc.nctrls = stv06xx_sensor_hdcs1x00.nctrls; + + hdcs = kmalloc(sizeof(struct hdcs), GFP_KERNEL); + if (!hdcs) + return -ENOMEM; + + hdcs->array.left = 8; + hdcs->array.top = 8; + hdcs->array.width = HDCS_1X00_DEF_WIDTH; + hdcs->array.height = HDCS_1X00_DEF_HEIGHT; + hdcs->array.border = 4; + + hdcs->exp.cto = 4; + hdcs->exp.cpo = 2; + hdcs->exp.rs = 186; + hdcs->exp.er = 100; + + /* + * Frame rate on HDCS-1000 0x46D:0x840 depends on PSMP: + * 4 = doesn't work at all + * 5 = 7.8 fps, + * 6 = 6.9 fps, + * 8 = 6.3 fps, + * 10 = 5.5 fps, + * 15 = 4.4 fps, + * 31 = 2.8 fps + * + * Frame rate on HDCS-1000 0x46D:0x870 depends on PSMP: + * 15 = doesn't work at all + * 18 = doesn't work at all + * 19 = 7.3 fps + * 20 = 7.4 fps + * 21 = 7.4 fps + * 22 = 7.4 fps + * 24 = 6.3 fps + * 30 = 5.4 fps + */ + hdcs->psmp = IS_870(sd) ? 20 : 5; + + sd->sensor_priv = hdcs; + + return 0; +} + +static int hdcs_probe_1020(struct sd *sd) +{ + struct hdcs *hdcs; + u16 sensor; + int ret; + + ret = stv06xx_read_sensor(sd, HDCS_IDENT, &sensor); + if (ret < 0 || sensor != 0x10) + return -ENODEV; + + info("HDCS-1020 sensor detected"); + + sd->gspca_dev.cam.cam_mode = stv06xx_sensor_hdcs1020.modes; + sd->gspca_dev.cam.nmodes = stv06xx_sensor_hdcs1020.nmodes; + sd->desc.ctrls = stv06xx_sensor_hdcs1020.ctrls; + sd->desc.nctrls = stv06xx_sensor_hdcs1020.nctrls; + + hdcs = kmalloc(sizeof(struct hdcs), GFP_KERNEL); + if (!hdcs) + return -ENOMEM; + + /* + * From Andrey's test image: looks like HDCS-1020 upper-left + * visible pixel is at 24,8 (y maybe even smaller?) and lower-right + * visible pixel at 375,299 (x maybe even larger?) + */ + hdcs->array.left = 24; + hdcs->array.top = 4; + hdcs->array.width = HDCS_1020_DEF_WIDTH; + hdcs->array.height = 304; + hdcs->array.border = 4; + + hdcs->psmp = 6; + + hdcs->exp.cto = 3; + hdcs->exp.cpo = 3; + hdcs->exp.rs = 155; + hdcs->exp.er = 96; + + sd->sensor_priv = hdcs; + + return 0; +} + +static int hdcs_start(struct sd *sd) +{ + PDEBUG(D_STREAM, "Starting stream"); + + return hdcs_set_state(sd, HDCS_STATE_RUN); +} + +static int hdcs_stop(struct sd *sd) +{ + PDEBUG(D_STREAM, "Halting stream"); + + return hdcs_set_state(sd, HDCS_STATE_SLEEP); +} + +static void hdcs_disconnect(struct sd *sd) +{ + PDEBUG(D_PROBE, "Disconnecting the sensor"); + kfree(sd->sensor_priv); +} + +static int hdcs_init(struct sd *sd) +{ + struct hdcs *hdcs = sd->sensor_priv; + int i, err = 0; + + /* Set the STV0602AA in STV0600 emulation mode */ + if (IS_870(sd)) + stv06xx_write_bridge(sd, STV_STV0600_EMULATION, 1); + + /* Execute the bridge init */ + for (i = 0; i < ARRAY_SIZE(stv_bridge_init) && !err; i++) { + err = stv06xx_write_bridge(sd, stv_bridge_init[i][0], + stv_bridge_init[i][1]); + } + if (err < 0) + return err; + + /* sensor soft reset */ + hdcs_reset(sd); + + /* Execute the sensor init */ + for (i = 0; i < ARRAY_SIZE(stv_sensor_init) && !err; i++) { + err = stv06xx_write_sensor(sd, stv_sensor_init[i][0], + stv_sensor_init[i][1]); + } + if (err < 0) + return err; + + /* Enable continous frame capture, bit 2: stop when frame complete */ + err = stv06xx_write_sensor(sd, HDCS_REG_CONFIG(sd), BIT(3)); + if (err < 0) + return err; + + /* Set PGA sample duration + (was 0x7E for IS_870, but caused slow framerate with HDCS-1020) */ + if (IS_1020(sd)) + err = stv06xx_write_sensor(sd, HDCS_TCTRL, + (HDCS_ADC_START_SIG_DUR << 6) | hdcs->psmp); + else + err = stv06xx_write_sensor(sd, HDCS_TCTRL, + (HDCS_ADC_START_SIG_DUR << 5) | hdcs->psmp); + if (err < 0) + return err; + + err = hdcs_set_gains(sd, HDCS_DEFAULT_GAIN, HDCS_DEFAULT_GAIN, + HDCS_DEFAULT_GAIN); + if (err < 0) + return err; + + err = hdcs_set_exposure(&sd->gspca_dev, HDCS_DEFAULT_EXPOSURE); + if (err < 0) + return err; + + err = hdcs_set_size(sd, hdcs->array.width, hdcs->array.height); + return err; +} + +static int hdcs_dump(struct sd *sd) +{ + u16 reg, val; + + info("Dumping sensor registers:"); + + for (reg = HDCS_IDENT; reg <= HDCS_ROWEXPH; reg++) { + stv06xx_read_sensor(sd, reg, &val); + info("reg 0x%02x = 0x%02x", reg, val); + } + return 0; +} diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h new file mode 100644 index 000000000000..9c7279a4cd88 --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h @@ -0,0 +1,263 @@ +/* + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * Copyright (c) 2008 Erik Andrén + * Copyright (c) 2008 Chia-I Wu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * P/N 861037: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express + * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam + * P/N 861075-0040: Sensor HDCS1000 ASIC + * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB + * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web + */ + +#ifndef STV06XX_HDCS_H_ +#define STV06XX_HDCS_H_ + +#include "stv06xx_sensor.h" + +#define HDCS_REG_CONFIG(sd) (IS_1020(sd) ? HDCS20_CONFIG : HDCS00_CONFIG) +#define HDCS_REG_CONTROL(sd) (IS_1020(sd) ? HDCS20_CONTROL : HDCS00_CONTROL) + +#define HDCS_1X00_DEF_WIDTH 360 +#define HDCS_1X00_DEF_HEIGHT 296 + +#define HDCS_1020_DEF_WIDTH 352 +#define HDCS_1020_DEF_HEIGHT 292 + +#define HDCS_1020_BOTTOM_Y_SKIP 4 + +#define HDCS_CLK_FREQ_MHZ 25 + +#define HDCS_ADC_START_SIG_DUR 3 + +/* LSB bit of I2C or register address signifies write (0) or read (1) */ +/* I2C Registers common for both HDCS-1000/1100 and HDCS-1020 */ +/* Identifications Register */ +#define HDCS_IDENT (0x00 << 1) +/* Status Register */ +#define HDCS_STATUS (0x01 << 1) +/* Interrupt Mask Register */ +#define HDCS_IMASK (0x02 << 1) +/* Pad Control Register */ +#define HDCS_PCTRL (0x03 << 1) +/* Pad Drive Control Register */ +#define HDCS_PDRV (0x04 << 1) +/* Interface Control Register */ +#define HDCS_ICTRL (0x05 << 1) +/* Interface Timing Register */ +#define HDCS_ITMG (0x06 << 1) +/* Baud Fraction Register */ +#define HDCS_BFRAC (0x07 << 1) +/* Baud Rate Register */ +#define HDCS_BRATE (0x08 << 1) +/* ADC Control Register */ +#define HDCS_ADCCTRL (0x09 << 1) +/* First Window Row Register */ +#define HDCS_FWROW (0x0a << 1) +/* First Window Column Register */ +#define HDCS_FWCOL (0x0b << 1) +/* Last Window Row Register */ +#define HDCS_LWROW (0x0c << 1) +/* Last Window Column Register */ +#define HDCS_LWCOL (0x0d << 1) +/* Timing Control Register */ +#define HDCS_TCTRL (0x0e << 1) +/* PGA Gain Register: Even Row, Even Column */ +#define HDCS_ERECPGA (0x0f << 1) +/* PGA Gain Register: Even Row, Odd Column */ +#define HDCS_EROCPGA (0x10 << 1) +/* PGA Gain Register: Odd Row, Even Column */ +#define HDCS_ORECPGA (0x11 << 1) +/* PGA Gain Register: Odd Row, Odd Column */ +#define HDCS_OROCPGA (0x12 << 1) +/* Row Exposure Low Register */ +#define HDCS_ROWEXPL (0x13 << 1) +/* Row Exposure High Register */ +#define HDCS_ROWEXPH (0x14 << 1) + +/* I2C Registers only for HDCS-1000/1100 */ +/* Sub-Row Exposure Low Register */ +#define HDCS00_SROWEXPL (0x15 << 1) +/* Sub-Row Exposure High Register */ +#define HDCS00_SROWEXPH (0x16 << 1) +/* Configuration Register */ +#define HDCS00_CONFIG (0x17 << 1) +/* Control Register */ +#define HDCS00_CONTROL (0x18 << 1) + +/* I2C Registers only for HDCS-1020 */ +/* Sub-Row Exposure Register */ +#define HDCS20_SROWEXP (0x15 << 1) +/* Error Control Register */ +#define HDCS20_ERROR (0x16 << 1) +/* Interface Timing 2 Register */ +#define HDCS20_ITMG2 (0x17 << 1) +/* Interface Control 2 Register */ +#define HDCS20_ICTRL2 (0x18 << 1) +/* Horizontal Blank Register */ +#define HDCS20_HBLANK (0x19 << 1) +/* Vertical Blank Register */ +#define HDCS20_VBLANK (0x1a << 1) +/* Configuration Register */ +#define HDCS20_CONFIG (0x1b << 1) +/* Control Register */ +#define HDCS20_CONTROL (0x1c << 1) + +#define HDCS_RUN_ENABLE (1 << 2) +#define HDCS_SLEEP_MODE (1 << 1) + +#define HDCS_DEFAULT_EXPOSURE 5000 +#define HDCS_DEFAULT_GAIN 128 + +static int hdcs_probe_1x00(struct sd *sd); +static int hdcs_probe_1020(struct sd *sd); +static int hdcs_start(struct sd *sd); +static int hdcs_init(struct sd *sd); +static int hdcs_stop(struct sd *sd); +static int hdcs_dump(struct sd *sd); +static void hdcs_disconnect(struct sd *sd); + +static int hdcs_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +static int hdcs_set_exposure(struct gspca_dev *gspca_dev, __s32 val); +static int hdcs_set_gain(struct gspca_dev *gspca_dev, __s32 val); +static int hdcs_get_gain(struct gspca_dev *gspca_dev, __s32 *val); + +const struct stv06xx_sensor stv06xx_sensor_hdcs1x00 = { + .name = "HP HDCS-1000/1100", + .i2c_flush = 0, + .i2c_addr = (0x55 << 1), + .i2c_len = 1, + + .init = hdcs_init, + .probe = hdcs_probe_1x00, + .start = hdcs_start, + .stop = hdcs_stop, + .disconnect = hdcs_disconnect, + .dump = hdcs_dump, + + .nctrls = 2, + .ctrls = { + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0xffff, + .step = 0x1, + .default_value = HDCS_DEFAULT_EXPOSURE, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = hdcs_set_exposure, + .get = hdcs_get_exposure + }, + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x1, + .default_value = HDCS_DEFAULT_GAIN, + .flags = V4L2_CTRL_FLAG_SLIDER + }, + .set = hdcs_set_gain, + .get = hdcs_get_gain + } + }, + + .nmodes = 1, + .modes = { + { + HDCS_1X00_DEF_WIDTH, + HDCS_1X00_DEF_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + HDCS_1X00_DEF_WIDTH * HDCS_1X00_DEF_HEIGHT, + .bytesperline = HDCS_1X00_DEF_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +const struct stv06xx_sensor stv06xx_sensor_hdcs1020 = { + .name = "HDCS-1020", + .i2c_flush = 0, + .i2c_addr = (0x55 << 1), + .i2c_len = 1, + + .nctrls = 0, + .ctrls = {}, + + .init = hdcs_init, + .probe = hdcs_probe_1020, + .start = hdcs_start, + .stop = hdcs_stop, + .dump = hdcs_dump, + + .nmodes = 1, + .modes = { + { + HDCS_1020_DEF_WIDTH, + HDCS_1020_DEF_HEIGHT, + V4L2_PIX_FMT_SBGGR8, + V4L2_FIELD_NONE, + .sizeimage = + HDCS_1020_DEF_WIDTH * HDCS_1020_DEF_HEIGHT, + .bytesperline = HDCS_1020_DEF_WIDTH, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + } + } +}; + +static const u16 stv_bridge_init[][2] = { + {STV_ISO_ENABLE, 0}, + {STV_REG23, 0}, + {STV_REG00, 0x1d}, + {STV_REG01, 0xb5}, + {STV_REG02, 0xa8}, + {STV_REG03, 0x95}, + {STV_REG04, 0x07}, + + {STV_SCAN_RATE, 0x20}, + {STV_ISO_SIZE_L, 847}, + {STV_Y_CTRL, 0x01}, + {STV_X_CTRL, 0x0a} +}; + +static const u8 stv_sensor_init[][2] = { + /* Clear status (writing 1 will clear the corresponding status bit) */ + {HDCS_STATUS, BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1)}, + /* Disable all interrupts */ + {HDCS_IMASK, 0x00}, + {HDCS_PCTRL, BIT(6) | BIT(5) | BIT(1) | BIT(0)}, + {HDCS_PDRV, 0x00}, + {HDCS_ICTRL, BIT(5)}, + {HDCS_ITMG, BIT(4) | BIT(1)}, + /* ADC output resolution to 10 bits */ + {HDCS_ADCCTRL, 10} +}; + +#endif diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c new file mode 100644 index 000000000000..d0a0f8596454 --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c @@ -0,0 +1,430 @@ +/* + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * Copyright (c) 2008 Erik Andrén + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * P/N 861037: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express + * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam + * P/N 861075-0040: Sensor HDCS1000 ASIC + * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB + * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web + */ + +/* + * The spec file for the PB-0100 suggests the following for best quality + * images after the sensor has been reset : + * + * PB_ADCGAINL = R60 = 0x03 (3 dec) : sets low reference of ADC + to produce good black level + * PB_PREADCTRL = R32 = 0x1400 (5120 dec) : Enables global gain changes + through R53 + * PB_ADCMINGAIN = R52 = 0x10 (16 dec) : Sets the minimum gain for + auto-exposure + * PB_ADCGLOBALGAIN = R53 = 0x10 (16 dec) : Sets the global gain + * PB_EXPGAIN = R14 = 0x11 (17 dec) : Sets the auto-exposure value + * PB_UPDATEINT = R23 = 0x02 (2 dec) : Sets the speed on + auto-exposure routine + * PB_CFILLIN = R5 = 0x0E (14 dec) : Sets the frame rate + */ + +#include "stv06xx_pb0100.h" + +static int pb0100_probe(struct sd *sd) +{ + u16 sensor; + int i, err; + s32 *sensor_settings; + + err = stv06xx_read_sensor(sd, PB_IDENT, &sensor); + + if (err < 0) + return -ENODEV; + + if ((sensor >> 8) == 0x64) { + sensor_settings = kmalloc( + stv06xx_sensor_pb0100.nctrls * sizeof(s32), + GFP_KERNEL); + if (!sensor_settings) + return -ENOMEM; + + info("Photobit pb0100 sensor detected"); + + sd->gspca_dev.cam.cam_mode = stv06xx_sensor_pb0100.modes; + sd->gspca_dev.cam.nmodes = stv06xx_sensor_pb0100.nmodes; + sd->desc.ctrls = stv06xx_sensor_pb0100.ctrls; + sd->desc.nctrls = stv06xx_sensor_pb0100.nctrls; + for (i = 0; i < stv06xx_sensor_pb0100.nctrls; i++) + sensor_settings[i] = stv06xx_sensor_pb0100. + ctrls[i].qctrl.default_value; + sd->sensor_priv = sensor_settings; + + return 0; + } + + return -ENODEV; +} + +static int pb0100_start(struct sd *sd) +{ + int err; + struct cam *cam = &sd->gspca_dev.cam; + s32 *sensor_settings = sd->sensor_priv; + u32 mode = cam->cam_mode[sd->gspca_dev.curr_mode].priv; + + /* Setup sensor window */ + if (mode & PB0100_CROP_TO_VGA) { + stv06xx_write_sensor(sd, PB_RSTART, 30); + stv06xx_write_sensor(sd, PB_CSTART, 20); + stv06xx_write_sensor(sd, PB_RWSIZE, 240 - 1); + stv06xx_write_sensor(sd, PB_CWSIZE, 320 - 1); + } else { + stv06xx_write_sensor(sd, PB_RSTART, 8); + stv06xx_write_sensor(sd, PB_CSTART, 4); + stv06xx_write_sensor(sd, PB_RWSIZE, 288 - 1); + stv06xx_write_sensor(sd, PB_CWSIZE, 352 - 1); + } + + if (mode & PB0100_SUBSAMPLE) { + stv06xx_write_bridge(sd, STV_Y_CTRL, 0x02); /* Wrong, FIXME */ + stv06xx_write_bridge(sd, STV_X_CTRL, 0x06); + + stv06xx_write_bridge(sd, STV_SCAN_RATE, 0x10); + } else { + stv06xx_write_bridge(sd, STV_Y_CTRL, 0x01); + stv06xx_write_bridge(sd, STV_X_CTRL, 0x0a); + /* larger -> slower */ + stv06xx_write_bridge(sd, STV_SCAN_RATE, 0x20); + } + + /* set_gain also sets red and blue balance */ + pb0100_set_gain(&sd->gspca_dev, sensor_settings[GAIN_IDX]); + pb0100_set_exposure(&sd->gspca_dev, sensor_settings[EXPOSURE_IDX]); + pb0100_set_autogain_target(&sd->gspca_dev, + sensor_settings[AUTOGAIN_TARGET_IDX]); + pb0100_set_autogain(&sd->gspca_dev, sensor_settings[AUTOGAIN_IDX]); + + err = stv06xx_write_sensor(sd, PB_CONTROL, BIT(5)|BIT(3)|BIT(1)); + PDEBUG(D_STREAM, "Started stream, status: %d", err); + + return (err < 0) ? err : 0; +} + +static int pb0100_stop(struct sd *sd) +{ + int err; + + err = stv06xx_write_sensor(sd, PB_ABORTFRAME, 1); + + if (err < 0) + goto out; + + /* Set bit 1 to zero */ + err = stv06xx_write_sensor(sd, PB_CONTROL, BIT(5)|BIT(3)); + + PDEBUG(D_STREAM, "Halting stream"); +out: + return (err < 0) ? err : 0; +} + +/* FIXME: Sort the init commands out and put them into tables, + this is only for getting the camera to work */ +/* FIXME: No error handling for now, + add this once the init has been converted to proper tables */ +static int pb0100_init(struct sd *sd) +{ + stv06xx_write_bridge(sd, STV_REG00, 1); + stv06xx_write_bridge(sd, STV_SCAN_RATE, 0); + + /* Reset sensor */ + stv06xx_write_sensor(sd, PB_RESET, 1); + stv06xx_write_sensor(sd, PB_RESET, 0); + + /* Disable chip */ + stv06xx_write_sensor(sd, PB_CONTROL, BIT(5)|BIT(3)); + + /* Gain stuff...*/ + stv06xx_write_sensor(sd, PB_PREADCTRL, BIT(12)|BIT(10)|BIT(6)); + stv06xx_write_sensor(sd, PB_ADCGLOBALGAIN, 12); + + /* Set up auto-exposure */ + /* ADC VREF_HI new setting for a transition + from the Expose1 to the Expose2 setting */ + stv06xx_write_sensor(sd, PB_R28, 12); + /* gain max for autoexposure */ + stv06xx_write_sensor(sd, PB_ADCMAXGAIN, 180); + /* gain min for autoexposure */ + stv06xx_write_sensor(sd, PB_ADCMINGAIN, 12); + /* Maximum frame integration time (programmed into R8) + allowed for auto-exposure routine */ + stv06xx_write_sensor(sd, PB_R54, 3); + /* Minimum frame integration time (programmed into R8) + allowed for auto-exposure routine */ + stv06xx_write_sensor(sd, PB_R55, 0); + stv06xx_write_sensor(sd, PB_UPDATEINT, 1); + /* R15 Expose0 (maximum that auto-exposure may use) */ + stv06xx_write_sensor(sd, PB_R15, 800); + /* R17 Expose2 (minimum that auto-exposure may use) */ + stv06xx_write_sensor(sd, PB_R17, 10); + + stv06xx_write_sensor(sd, PB_EXPGAIN, 0); + + /* 0x14 */ + stv06xx_write_sensor(sd, PB_VOFFSET, 0); + /* 0x0D */ + stv06xx_write_sensor(sd, PB_ADCGAINH, 11); + /* Set black level (important!) */ + stv06xx_write_sensor(sd, PB_ADCGAINL, 0); + + /* ??? */ + stv06xx_write_bridge(sd, STV_REG00, 0x11); + stv06xx_write_bridge(sd, STV_REG03, 0x45); + stv06xx_write_bridge(sd, STV_REG04, 0x07); + + /* ISO-Size (0x27b: 635... why? - HDCS uses 847) */ + stv06xx_write_bridge(sd, STV_ISO_SIZE_L, 847); + + /* Scan/timing for the sensor */ + stv06xx_write_sensor(sd, PB_ROWSPEED, BIT(4)|BIT(3)|BIT(1)); + stv06xx_write_sensor(sd, PB_CFILLIN, 14); + stv06xx_write_sensor(sd, PB_VBL, 0); + stv06xx_write_sensor(sd, PB_FINTTIME, 0); + stv06xx_write_sensor(sd, PB_RINTTIME, 123); + + stv06xx_write_bridge(sd, STV_REG01, 0xc2); + stv06xx_write_bridge(sd, STV_REG02, 0xb0); + return 0; +} + +static int pb0100_dump(struct sd *sd) +{ + return 0; +} + +static int pb0100_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[GAIN_IDX]; + + return 0; +} + +static int pb0100_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + if (sensor_settings[AUTOGAIN_IDX]) + return -EBUSY; + + sensor_settings[GAIN_IDX] = val; + err = stv06xx_write_sensor(sd, PB_G1GAIN, val); + if (!err) + err = stv06xx_write_sensor(sd, PB_G2GAIN, val); + PDEBUG(D_V4L2, "Set green gain to %d, status: %d", val, err); + + if (!err) + err = pb0100_set_red_balance(gspca_dev, + sensor_settings[RED_BALANCE_IDX]); + if (!err) + err = pb0100_set_blue_balance(gspca_dev, + sensor_settings[BLUE_BALANCE_IDX]); + + return err; +} + +static int pb0100_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[RED_BALANCE_IDX]; + + return 0; +} + +static int pb0100_set_red_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + if (sensor_settings[AUTOGAIN_IDX]) + return -EBUSY; + + sensor_settings[RED_BALANCE_IDX] = val; + val += sensor_settings[GAIN_IDX]; + if (val < 0) + val = 0; + else if (val > 255) + val = 255; + + err = stv06xx_write_sensor(sd, PB_RGAIN, val); + PDEBUG(D_V4L2, "Set red gain to %d, status: %d", val, err); + + return err; +} + +static int pb0100_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[BLUE_BALANCE_IDX]; + + return 0; +} + +static int pb0100_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + if (sensor_settings[AUTOGAIN_IDX]) + return -EBUSY; + + sensor_settings[BLUE_BALANCE_IDX] = val; + val += sensor_settings[GAIN_IDX]; + if (val < 0) + val = 0; + else if (val > 255) + val = 255; + + err = stv06xx_write_sensor(sd, PB_BGAIN, val); + PDEBUG(D_V4L2, "Set blue gain to %d, status: %d", val, err); + + return err; +} + +static int pb0100_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[EXPOSURE_IDX]; + + return 0; +} + +static int pb0100_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + if (sensor_settings[AUTOGAIN_IDX]) + return -EBUSY; + + sensor_settings[EXPOSURE_IDX] = val; + err = stv06xx_write_sensor(sd, PB_RINTTIME, val); + PDEBUG(D_V4L2, "Set exposure to %d, status: %d", val, err); + + return err; +} + +static int pb0100_get_autogain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[AUTOGAIN_IDX]; + + return 0; +} + +static int pb0100_set_autogain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[AUTOGAIN_IDX] = val; + if (sensor_settings[AUTOGAIN_IDX]) { + if (sensor_settings[NATURAL_IDX]) + val = BIT(6)|BIT(4)|BIT(0); + else + val = BIT(4)|BIT(0); + } else + val = 0; + + err = stv06xx_write_sensor(sd, PB_EXPGAIN, val); + PDEBUG(D_V4L2, "Set autogain to %d (natural: %d), status: %d", + sensor_settings[AUTOGAIN_IDX], sensor_settings[NATURAL_IDX], + err); + + return err; +} + +static int pb0100_get_autogain_target(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[AUTOGAIN_TARGET_IDX]; + + return 0; +} + +static int pb0100_set_autogain_target(struct gspca_dev *gspca_dev, __s32 val) +{ + int err, totalpixels, brightpixels, darkpixels; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[AUTOGAIN_TARGET_IDX] = val; + + /* Number of pixels counted by the sensor when subsampling the pixels. + * Slightly larger than the real value to avoid oscillation */ + totalpixels = gspca_dev->width * gspca_dev->height; + totalpixels = totalpixels/(8*8) + totalpixels/(64*64); + + brightpixels = (totalpixels * val) >> 8; + darkpixels = totalpixels - brightpixels; + err = stv06xx_write_sensor(sd, PB_R21, brightpixels); + if (!err) + err = stv06xx_write_sensor(sd, PB_R22, darkpixels); + + PDEBUG(D_V4L2, "Set autogain target to %d, status: %d", val, err); + + return err; +} + +static int pb0100_get_natural(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[NATURAL_IDX]; + + return 0; +} + +static int pb0100_set_natural(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[NATURAL_IDX] = val; + + return pb0100_set_autogain(gspca_dev, sensor_settings[AUTOGAIN_IDX]); +} diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h new file mode 100644 index 000000000000..5ea21a1154c4 --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h @@ -0,0 +1,275 @@ +/* + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * Copyright (c) 2008 Erik Andrén + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * P/N 861037: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express + * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam + * P/N 861075-0040: Sensor HDCS1000 ASIC + * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB + * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web + */ + +#ifndef STV06XX_PB0100_H_ +#define STV06XX_PB0100_H_ + +#include "stv06xx_sensor.h" + +/* mode priv field flags */ +#define PB0100_CROP_TO_VGA 0x01 +#define PB0100_SUBSAMPLE 0x02 + +/* I2C Registers */ +#define PB_IDENT 0x00 /* Chip Version */ +#define PB_RSTART 0x01 /* Row Window Start */ +#define PB_CSTART 0x02 /* Column Window Start */ +#define PB_RWSIZE 0x03 /* Row Window Size */ +#define PB_CWSIZE 0x04 /* Column Window Size */ +#define PB_CFILLIN 0x05 /* Column Fill-In */ +#define PB_VBL 0x06 /* Vertical Blank Count */ +#define PB_CONTROL 0x07 /* Control Mode */ +#define PB_FINTTIME 0x08 /* Integration Time/Frame Unit Count */ +#define PB_RINTTIME 0x09 /* Integration Time/Row Unit Count */ +#define PB_ROWSPEED 0x0a /* Row Speed Control */ +#define PB_ABORTFRAME 0x0b /* Abort Frame */ +#define PB_R12 0x0c /* Reserved */ +#define PB_RESET 0x0d /* Reset */ +#define PB_EXPGAIN 0x0e /* Exposure Gain Command */ +#define PB_R15 0x0f /* Expose0 */ +#define PB_R16 0x10 /* Expose1 */ +#define PB_R17 0x11 /* Expose2 */ +#define PB_R18 0x12 /* Low0_DAC */ +#define PB_R19 0x13 /* Low1_DAC */ +#define PB_R20 0x14 /* Low2_DAC */ +#define PB_R21 0x15 /* Threshold11 */ +#define PB_R22 0x16 /* Threshold0x */ +#define PB_UPDATEINT 0x17 /* Update Interval */ +#define PB_R24 0x18 /* High_DAC */ +#define PB_R25 0x19 /* Trans0H */ +#define PB_R26 0x1a /* Trans1L */ +#define PB_R27 0x1b /* Trans1H */ +#define PB_R28 0x1c /* Trans2L */ +#define PB_R29 0x1d /* Reserved */ +#define PB_R30 0x1e /* Reserved */ +#define PB_R31 0x1f /* Wait to Read */ +#define PB_PREADCTRL 0x20 /* Pixel Read Control Mode */ +#define PB_R33 0x21 /* IREF_VLN */ +#define PB_R34 0x22 /* IREF_VLP */ +#define PB_R35 0x23 /* IREF_VLN_INTEG */ +#define PB_R36 0x24 /* IREF_MASTER */ +#define PB_R37 0x25 /* IDACP */ +#define PB_R38 0x26 /* IDACN */ +#define PB_R39 0x27 /* DAC_Control_Reg */ +#define PB_R40 0x28 /* VCL */ +#define PB_R41 0x29 /* IREF_VLN_ADCIN */ +#define PB_R42 0x2a /* Reserved */ +#define PB_G1GAIN 0x2b /* Green 1 Gain */ +#define PB_BGAIN 0x2c /* Blue Gain */ +#define PB_RGAIN 0x2d /* Red Gain */ +#define PB_G2GAIN 0x2e /* Green 2 Gain */ +#define PB_R47 0x2f /* Dark Row Address */ +#define PB_R48 0x30 /* Dark Row Options */ +#define PB_R49 0x31 /* Reserved */ +#define PB_R50 0x32 /* Image Test Data */ +#define PB_ADCMAXGAIN 0x33 /* Maximum Gain */ +#define PB_ADCMINGAIN 0x34 /* Minimum Gain */ +#define PB_ADCGLOBALGAIN 0x35 /* Global Gain */ +#define PB_R54 0x36 /* Maximum Frame */ +#define PB_R55 0x37 /* Minimum Frame */ +#define PB_R56 0x38 /* Reserved */ +#define PB_VOFFSET 0x39 /* VOFFSET */ +#define PB_R58 0x3a /* Snap-Shot Sequence Trigger */ +#define PB_ADCGAINH 0x3b /* VREF_HI */ +#define PB_ADCGAINL 0x3c /* VREF_LO */ +#define PB_R61 0x3d /* Reserved */ +#define PB_R62 0x3e /* Reserved */ +#define PB_R63 0x3f /* Reserved */ +#define PB_R64 0x40 /* Red/Blue Gain */ +#define PB_R65 0x41 /* Green 2/Green 1 Gain */ +#define PB_R66 0x42 /* VREF_HI/LO */ +#define PB_R67 0x43 /* Integration Time/Row Unit Count */ +#define PB_R240 0xf0 /* ADC Test */ +#define PB_R241 0xf1 /* Chip Enable */ +#define PB_R242 0xf2 /* Reserved */ + +static int pb0100_probe(struct sd *sd); +static int pb0100_start(struct sd *sd); +static int pb0100_init(struct sd *sd); +static int pb0100_stop(struct sd *sd); +static int pb0100_dump(struct sd *sd); + +/* V4L2 controls supported by the driver */ +static int pb0100_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +static int pb0100_set_gain(struct gspca_dev *gspca_dev, __s32 val); +static int pb0100_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val); +static int pb0100_set_red_balance(struct gspca_dev *gspca_dev, __s32 val); +static int pb0100_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val); +static int pb0100_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val); +static int pb0100_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +static int pb0100_set_exposure(struct gspca_dev *gspca_dev, __s32 val); +static int pb0100_get_autogain(struct gspca_dev *gspca_dev, __s32 *val); +static int pb0100_set_autogain(struct gspca_dev *gspca_dev, __s32 val); +static int pb0100_get_autogain_target(struct gspca_dev *gspca_dev, __s32 *val); +static int pb0100_set_autogain_target(struct gspca_dev *gspca_dev, __s32 val); +static int pb0100_get_natural(struct gspca_dev *gspca_dev, __s32 *val); +static int pb0100_set_natural(struct gspca_dev *gspca_dev, __s32 val); + +const struct stv06xx_sensor stv06xx_sensor_pb0100 = { + .name = "PB-0100", + .i2c_flush = 1, + .i2c_addr = 0xba, + .i2c_len = 2, + + .nctrls = 7, + .ctrls = { +#define GAIN_IDX 0 + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 128 + }, + .set = pb0100_set_gain, + .get = pb0100_get_gain + }, +#define RED_BALANCE_IDX 1 + { + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = -255, + .maximum = 255, + .step = 1, + .default_value = 0 + }, + .set = pb0100_set_red_balance, + .get = pb0100_get_red_balance + }, +#define BLUE_BALANCE_IDX 2 + { + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = -255, + .maximum = 255, + .step = 1, + .default_value = 0 + }, + .set = pb0100_set_blue_balance, + .get = pb0100_get_blue_balance + }, +#define EXPOSURE_IDX 3 + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 511, + .step = 1, + .default_value = 12 + }, + .set = pb0100_set_exposure, + .get = pb0100_get_exposure + }, +#define AUTOGAIN_IDX 4 + { + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Automatic Gain and Exposure", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1 + }, + .set = pb0100_set_autogain, + .get = pb0100_get_autogain + }, +#define AUTOGAIN_TARGET_IDX 5 + { + { + .id = V4L2_CTRL_CLASS_USER + 0x1000, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Automatic Gain Target", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 128 + }, + .set = pb0100_set_autogain_target, + .get = pb0100_get_autogain_target + }, +#define NATURAL_IDX 6 + { + { + .id = V4L2_CTRL_CLASS_USER + 0x1001, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Natural Light Source", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1 + }, + .set = pb0100_set_natural, + .get = pb0100_get_natural + }, + }, + + .init = pb0100_init, + .probe = pb0100_probe, + .start = pb0100_start, + .stop = pb0100_stop, + .dump = pb0100_dump, + + .nmodes = 2, + .modes = { +/* low res / subsample modes disabled as they are only half res horizontal, + halving the vertical resolution does not seem to work */ + { + 320, + 240, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .sizeimage = 320 * 240, + .bytesperline = 320, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = PB0100_CROP_TO_VGA + }, + { + 352, + 288, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .sizeimage = 352 * 288, + .bytesperline = 352, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 + }, + } +}; + +#endif diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h new file mode 100644 index 000000000000..c726dacefa1f --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h @@ -0,0 +1,92 @@ +/* + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * Copyright (c) 2008 Erik Andrén + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * P/N 861037: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express + * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam + * P/N 861075-0040: Sensor HDCS1000 ASIC + * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB + * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web + */ + +#ifndef STV06XX_SENSOR_H_ +#define STV06XX_SENSOR_H_ + +#include "stv06xx.h" + +#define IS_850(sd) ((sd)->gspca_dev.dev->descriptor.idProduct == 0x850) +#define IS_870(sd) ((sd)->gspca_dev.dev->descriptor.idProduct == 0x870) +#define IS_1020(sd) ((sd)->sensor == &stv06xx_sensor_hdcs1020) + +extern const struct stv06xx_sensor stv06xx_sensor_vv6410; +extern const struct stv06xx_sensor stv06xx_sensor_hdcs1x00; +extern const struct stv06xx_sensor stv06xx_sensor_hdcs1020; +extern const struct stv06xx_sensor stv06xx_sensor_pb0100; + +#define STV06XX_MAX_CTRLS (V4L2_CID_LASTP1 - V4L2_CID_BASE + 10) + +struct stv06xx_sensor { + /* Defines the name of a sensor */ + char name[32]; + + /* Sensor i2c address */ + u8 i2c_addr; + + /* Flush value*/ + u8 i2c_flush; + + /* length of an i2c word */ + u8 i2c_len; + + /* Probes if the sensor is connected */ + int (*probe)(struct sd *sd); + + /* Performs a initialization sequence */ + int (*init)(struct sd *sd); + + /* Executed at device disconnect */ + void (*disconnect)(struct sd *sd); + + /* Reads a sensor register */ + int (*read_sensor)(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + + /* Writes to a sensor register */ + int (*write_sensor)(struct sd *sd, const u8 address, + u8 *i2c_data, const u8 len); + + /* Instructs the sensor to start streaming */ + int (*start)(struct sd *sd); + + /* Instructs the sensor to stop streaming */ + int (*stop)(struct sd *sd); + + /* Instructs the sensor to dump all its contents */ + int (*dump)(struct sd *sd); + + int nctrls; + struct ctrl ctrls[STV06XX_MAX_CTRLS]; + + char nmodes; + struct v4l2_pix_format modes[]; +}; + +#endif diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c new file mode 100644 index 000000000000..1ca91f2a6dee --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.c @@ -0,0 +1,251 @@ +/* + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * Copyright (c) 2008 Erik Andrén + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * P/N 861037: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express + * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam + * P/N 861075-0040: Sensor HDCS1000 ASIC + * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB + * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web + */ + +#include "stv06xx_vv6410.h" + +static int vv6410_probe(struct sd *sd) +{ + u16 data; + int err; + + err = stv06xx_read_sensor(sd, VV6410_DEVICEH, &data); + + if (err < 0) + return -ENODEV; + + if (data == 0x19) { + info("vv6410 sensor detected"); + + sd->gspca_dev.cam.cam_mode = stv06xx_sensor_vv6410.modes; + sd->gspca_dev.cam.nmodes = stv06xx_sensor_vv6410.nmodes; + sd->desc.ctrls = stv06xx_sensor_vv6410.ctrls; + sd->desc.nctrls = stv06xx_sensor_vv6410.nctrls; + return 0; + } + + return -ENODEV; +} + +static int vv6410_init(struct sd *sd) +{ + int err = 0, i; + + for (i = 0; i < ARRAY_SIZE(stv_bridge_init); i++) { + /* if NULL then len contains single value */ + if (stv_bridge_init[i].data == NULL) { + err = stv06xx_write_bridge(sd, + stv_bridge_init[i].start, + stv_bridge_init[i].len); + } else { + int j; + for (j = 0; j < stv_bridge_init[i].len; j++) + err = stv06xx_write_bridge(sd, + stv_bridge_init[i].start + j, + stv_bridge_init[i].data[j]); + } + } + + if (err < 0) + return err; + + err = stv06xx_write_sensor_bytes(sd, (u8 *) vv6410_sensor_init, + ARRAY_SIZE(vv6410_sensor_init)); + + return (err < 0) ? err : 0; +} + +static int vv6410_start(struct sd *sd) +{ + int err; + struct cam *cam = &sd->gspca_dev.cam; + u32 priv = cam->cam_mode[sd->gspca_dev.curr_mode].priv; + + if (priv & VV6410_CROP_TO_QVGA) { + PDEBUG(D_CONF, "Cropping to QVGA"); + stv06xx_write_sensor(sd, VV6410_XENDH, 320 - 1); + stv06xx_write_sensor(sd, VV6410_YENDH, 240 - 1); + } else { + stv06xx_write_sensor(sd, VV6410_XENDH, 360 - 1); + stv06xx_write_sensor(sd, VV6410_YENDH, 294 - 1); + } + + if (priv & VV6410_SUBSAMPLE) { + PDEBUG(D_CONF, "Enabling subsampling"); + stv06xx_write_bridge(sd, STV_Y_CTRL, 0x02); + stv06xx_write_bridge(sd, STV_X_CTRL, 0x06); + + stv06xx_write_bridge(sd, STV_SCAN_RATE, 0x10); + } else { + stv06xx_write_bridge(sd, STV_Y_CTRL, 0x01); + stv06xx_write_bridge(sd, STV_X_CTRL, 0x0a); + + stv06xx_write_bridge(sd, STV_SCAN_RATE, 0x20); + } + + /* Turn on LED */ + err = stv06xx_write_bridge(sd, STV_LED_CTRL, LED_ON); + if (err < 0) + return err; + + err = stv06xx_write_sensor(sd, VV6410_SETUP0, 0); + if (err < 0) + return err; + + PDEBUG(D_STREAM, "Starting stream"); + + return 0; +} + +static int vv6410_stop(struct sd *sd) +{ + int err; + + /* Turn off LED */ + err = stv06xx_write_bridge(sd, STV_LED_CTRL, LED_OFF); + if (err < 0) + return err; + + err = stv06xx_write_sensor(sd, VV6410_SETUP0, VV6410_LOW_POWER_MODE); + if (err < 0) + return err; + + PDEBUG(D_STREAM, "Halting stream"); + + return (err < 0) ? err : 0; +} + +static int vv6410_dump(struct sd *sd) +{ + u8 i; + int err = 0; + + info("Dumping all vv6410 sensor registers"); + for (i = 0; i < 0xff && !err; i++) { + u16 data; + err = stv06xx_read_sensor(sd, i, &data); + info("Register 0x%x contained 0x%x", i, data); + } + return (err < 0) ? err : 0; +} + +static int vv6410_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u16 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = stv06xx_read_sensor(sd, VV6410_DATAFORMAT, &i2c_data); + + *val = (i2c_data & VV6410_HFLIP) ? 1 : 0; + + PDEBUG(D_V4L2, "Read horizontal flip %d", *val); + + return (err < 0) ? err : 0; +} + +static int vv6410_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u16 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + err = stv06xx_read_sensor(sd, VV6410_DATAFORMAT, &i2c_data); + if (err < 0) + return err; + + if (val) + i2c_data |= VV6410_HFLIP; + else + i2c_data &= ~VV6410_HFLIP; + + PDEBUG(D_V4L2, "Set horizontal flip to %d", val); + err = stv06xx_write_sensor(sd, VV6410_DATAFORMAT, i2c_data); + + return (err < 0) ? err : 0; +} + +static int vv6410_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u16 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = stv06xx_read_sensor(sd, VV6410_DATAFORMAT, &i2c_data); + + *val = (i2c_data & VV6410_VFLIP) ? 1 : 0; + + PDEBUG(D_V4L2, "Read vertical flip %d", *val); + + return (err < 0) ? err : 0; +} + +static int vv6410_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + u16 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + err = stv06xx_read_sensor(sd, VV6410_DATAFORMAT, &i2c_data); + if (err < 0) + return err; + + if (val) + i2c_data |= VV6410_VFLIP; + else + i2c_data &= ~VV6410_VFLIP; + + PDEBUG(D_V4L2, "Set vertical flip to %d", val); + err = stv06xx_write_sensor(sd, VV6410_DATAFORMAT, i2c_data); + + return (err < 0) ? err : 0; +} + +static int vv6410_get_analog_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + int err; + u16 i2c_data; + struct sd *sd = (struct sd *) gspca_dev; + + err = stv06xx_read_sensor(sd, VV6410_ANALOGGAIN, &i2c_data); + + *val = i2c_data & 0xf; + + PDEBUG(D_V4L2, "Read analog gain %d", *val); + + return (err < 0) ? err : 0; +} + +static int vv6410_set_analog_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + + PDEBUG(D_V4L2, "Set analog gain to %d", val); + err = stv06xx_write_sensor(sd, VV6410_ANALOGGAIN, 0xf0 | (val & 0xf)); + + return (err < 0) ? err : 0; +} diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h new file mode 100644 index 000000000000..3ff8c4ea3362 --- /dev/null +++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h @@ -0,0 +1,315 @@ +/* + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * Copyright (c) 2008 Erik Andrén + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * P/N 861037: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express + * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam + * P/N 861075-0040: Sensor HDCS1000 ASIC + * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB + * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web + */ + +#ifndef STV06XX_VV6410_H_ +#define STV06XX_VV6410_H_ + +#include "stv06xx_sensor.h" + +#define VV6410_COLS 416 +#define VV6410_ROWS 320 + +/* Status registers */ +/* Chip identification number including revision indicator */ +#define VV6410_DEVICEH 0x00 +#define VV6410_DEVICEL 0x01 + +/* User can determine whether timed I2C data + has been consumed by interrogating flag states */ +#define VV6410_STATUS0 0x02 + +/* Current line counter value */ +#define VV6410_LINECOUNTH 0x03 +#define VV6410_LINECOUNTL 0x04 + +/* End x coordinate of image size */ +#define VV6410_XENDH 0x05 +#define VV6410_XENDL 0x06 + +/* End y coordinate of image size */ +#define VV6410_YENDH 0x07 +#define VV6410_YENDL 0x08 + +/* This is the average pixel value returned from the + dark line offset cancellation algorithm */ +#define VV6410_DARKAVGH 0x09 +#define VV6410_DARKAVGL 0x0a + +/* This is the average pixel value returned from the + black line offset cancellation algorithm */ +#define VV6410_BLACKAVGH 0x0b +#define VV6410_BLACKAVGL 0x0c + +/* Flags to indicate whether the x or y image coordinates have been clipped */ +#define VV6410_STATUS1 0x0d + +/* Setup registers */ + +/* Low-power/sleep modes & video timing */ +#define VV6410_SETUP0 0x10 + +/* Various parameters */ +#define VV6410_SETUP1 0x11 + +/* Contains pixel counter reset value used by external sync */ +#define VV6410_SYNCVALUE 0x12 + +/* Frame grabbing modes (FST, LST and QCK) */ +#define VV6410_FGMODES 0x14 + +/* FST and QCK mapping modes. */ +#define VV6410_PINMAPPING 0x15 + +/* Data resolution */ +#define VV6410_DATAFORMAT 0x16 + +/* Output coding formats */ +#define VV6410_OPFORMAT 0x17 + +/* Various mode select bits */ +#define VV6410_MODESELECT 0x18 + +/* Exposure registers */ +/* Fine exposure. */ +#define VV6410_FINEH 0x20 +#define VV6410_FINEL 0x21 + +/* Coarse exposure */ +#define VV6410_COARSEH 0x22 +#define VV6410_COARSEL 0x23 + +/* Analog gain setting */ +#define VV6410_ANALOGGAIN 0x24 + +/* Clock division */ +#define VV6410_CLKDIV 0x25 + +/* Dark line offset cancellation value */ +#define VV6410_DARKOFFSETH 0x2c +#define VV6410_DARKOFFSETL 0x2d + +/* Dark line offset cancellation enable */ +#define VV6410_DARKOFFSETSETUP 0x2e + +/* Video timing registers */ +/* Line Length (Pixel Clocks) */ +#define VV6410_LINELENGTHH 0x52 +#define VV6410_LINELENGTHL 0x53 + +/* X-co-ordinate of top left corner of region of interest (x-offset) */ +#define VV6410_XOFFSETH 0x57 +#define VV6410_XOFFSETL 0x58 + +/* Y-coordinate of top left corner of region of interest (y-offset) */ +#define VV6410_YOFFSETH 0x59 +#define VV6410_YOFFSETL 0x5a + +/* Field length (Lines) */ +#define VV6410_FIELDLENGTHH 0x61 +#define VV6410_FIELDLENGTHL 0x62 + +/* System registers */ +/* Black offset cancellation default value */ +#define VV6410_BLACKOFFSETH 0x70 +#define VV6410_BLACKOFFSETL 0x71 + +/* Black offset cancellation setup */ +#define VV6410_BLACKOFFSETSETUP 0x72 + +/* Analog Control Register 0 */ +#define VV6410_CR0 0x75 + +/* Analog Control Register 1 */ +#define VV6410_CR1 0x76 + +/* ADC Setup Register */ +#define VV6410_AS0 0x77 + +/* Analog Test Register */ +#define VV6410_AT0 0x78 + +/* Audio Amplifier Setup Register */ +#define VV6410_AT1 0x79 + +#define VV6410_HFLIP (1 << 3) +#define VV6410_VFLIP (1 << 4) + +#define VV6410_LOW_POWER_MODE (1 << 0) +#define VV6410_SOFT_RESET (1 << 2) +#define VV6410_PAL_25_FPS (0 << 3) + +#define VV6410_CLK_DIV_2 (1 << 1) + +#define VV6410_FINE_EXPOSURE 320 +#define VV6410_COARSE_EXPOSURE 192 +#define VV6410_DEFAULT_GAIN 5 + +#define VV6410_SUBSAMPLE 0x01 +#define VV6410_CROP_TO_QVGA 0x02 + +static int vv6410_probe(struct sd *sd); +static int vv6410_start(struct sd *sd); +static int vv6410_init(struct sd *sd); +static int vv6410_stop(struct sd *sd); +static int vv6410_dump(struct sd *sd); + +/* V4L2 controls supported by the driver */ +static int vv6410_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +static int vv6410_set_hflip(struct gspca_dev *gspca_dev, __s32 val); +static int vv6410_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +static int vv6410_set_vflip(struct gspca_dev *gspca_dev, __s32 val); +static int vv6410_get_analog_gain(struct gspca_dev *gspca_dev, __s32 *val); +static int vv6410_set_analog_gain(struct gspca_dev *gspca_dev, __s32 val); + +const struct stv06xx_sensor stv06xx_sensor_vv6410 = { + .name = "ST VV6410", + .i2c_flush = 5, + .i2c_addr = 0x20, + .i2c_len = 1, + .init = vv6410_init, + .probe = vv6410_probe, + .start = vv6410_start, + .stop = vv6410_stop, + .dump = vv6410_dump, + + .nctrls = 3, + .ctrls = { + { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = vv6410_set_hflip, + .get = vv6410_get_hflip + }, { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0 + }, + .set = vv6410_set_vflip, + .get = vv6410_get_vflip + }, { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "analog gain", + .minimum = 0, + .maximum = 15, + .step = 1, + .default_value = 0 + }, + .set = vv6410_set_analog_gain, + .get = vv6410_get_analog_gain + } + }, + + .nmodes = 1, + .modes = { + { + 356, + 292, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .sizeimage = + 356 * 292, + .bytesperline = 356, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 + } + } +}; + +/* If NULL, only single value to write, stored in len */ +struct stv_init { + const u8 *data; + u16 start; + u8 len; +}; + +static const u8 x1500[] = { /* 0x1500 - 0x150f */ + 0x0b, 0xa7, 0xb7, 0x00, 0x00 +}; + +static const u8 x1536[] = { /* 0x1536 - 0x153b */ + 0x02, 0x00, 0x60, 0x01, 0x20, 0x01 +}; + +static const u8 x15c1[] = { /* 0x15c1 - 0x15c2 */ + 0xff, 0x03 /* Output word 0x03ff = 1023 (ISO size) */ +}; + +static const struct stv_init stv_bridge_init[] = { + /* This reg is written twice. Some kind of reset? */ + {NULL, 0x1620, 0x80}, + {NULL, 0x1620, 0x00}, + {NULL, 0x1423, 0x04}, + {x1500, 0x1500, ARRAY_SIZE(x1500)}, + {x1536, 0x1536, ARRAY_SIZE(x1536)}, + {x15c1, 0x15c1, ARRAY_SIZE(x15c1)} +}; + +static const u8 vv6410_sensor_init[][2] = { + /* Setup registers */ + {VV6410_SETUP0, VV6410_SOFT_RESET}, + {VV6410_SETUP0, VV6410_LOW_POWER_MODE}, + /* Use shuffled read-out mode */ + {VV6410_SETUP1, BIT(6)}, + /* All modes to 1 */ + {VV6410_FGMODES, BIT(6) | BIT(4) | BIT(2) | BIT(0)}, + {VV6410_PINMAPPING, 0x00}, + /* Pre-clock generator divide off */ + {VV6410_DATAFORMAT, BIT(7) | BIT(0)}, + + /* Exposure registers */ + {VV6410_FINEH, VV6410_FINE_EXPOSURE >> 8}, + {VV6410_FINEL, VV6410_FINE_EXPOSURE & 0xff}, + {VV6410_COARSEH, VV6410_COARSE_EXPOSURE >> 8}, + {VV6410_COARSEL, VV6410_COARSE_EXPOSURE & 0xff}, + {VV6410_ANALOGGAIN, 0xf0 | VV6410_DEFAULT_GAIN}, + {VV6410_CLKDIV, VV6410_CLK_DIV_2}, + + /* System registers */ + /* Enable voltage doubler */ + {VV6410_AS0, BIT(6) | BIT(4) | BIT(3) | BIT(2) | BIT(1)}, + {VV6410_AT0, 0x00}, + /* Power up audio, differential */ + {VV6410_AT1, BIT(4)|BIT(0)}, +}; + +#endif -- cgit v1.2.3 From da3bcb5d909925397715dff4a7584f21f9857bfa Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 29 Dec 2008 09:06:09 -0300 Subject: V4L/DVB (10050): gspca - vc032x: Webcam 046d:0897 added. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/vc032x.c | 1 + 2 files changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index f54281d78c12..1c58a7630146 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -56,6 +56,7 @@ stv06xx 046d:0870 Dexxa WebCam USB spca500 046d:0890 Logitech QuickCam traveler vc032x 046d:0892 Logitech Orbicam vc032x 046d:0896 Logitech Orbicam +vc032x 046d:0897 Logitech QuickCam for Dell notebooks zc3xx 046d:089d Logitech QuickCam E2500 zc3xx 046d:08a0 Logitech QC IM zc3xx 046d:08a1 Logitech QC IM 0x08A1 +sound diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index 71335dad433a..0525ea51a6de 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -2426,6 +2426,7 @@ static const struct sd_desc sd_desc = { static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x046d, 0x0892), .driver_info = BRIDGE_VC0321}, {USB_DEVICE(0x046d, 0x0896), .driver_info = BRIDGE_VC0321}, + {USB_DEVICE(0x046d, 0x0897), .driver_info = BRIDGE_VC0321}, {USB_DEVICE(0x0ac8, 0x0321), .driver_info = BRIDGE_VC0321}, {USB_DEVICE(0x0ac8, 0x0323), .driver_info = BRIDGE_VC0323}, {USB_DEVICE(0x0ac8, 0x0328), .driver_info = BRIDGE_VC0321}, -- cgit v1.2.3 From 1e1addd57bdf56c51dbc292d7760ea3d207fe833 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Sat, 27 Dec 2008 21:38:14 -0300 Subject: V4L/DVB (10055): em28xx: Add entry for PixelView PlayTV Box 4 Added board PixelView PlayTV Box 4 Thanks to Vildenei Negrao Pereira for testing and data collection. Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 1 + drivers/media/video/em28xx/em28xx-cards.c | 22 ++++++++++++++++++++++ drivers/media/video/em28xx/em28xx.h | 1 + 3 files changed, 24 insertions(+) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 0c4c721daba9..96b1eb8ac874 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -59,3 +59,4 @@ 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] 59 -> Pinnacle PCTV HD Mini (em2874) [2304:023f] 60 -> Hauppauge WinTV HVR 850 (em2883) [2040:651f] + 61 -> Pixelview PlayTV Box 4 USB 2.0 (em2820/em2840) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 3759f3a56cb7..0acab0d3c00b 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -943,6 +943,27 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_LINE_IN, } }, }, + [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { + .name = "Pixelview PlayTV Box 4 USB 2.0", + .tda9887_conf = TDA9887_PRESENT, + .tuner_type = TUNER_YMEC_TVF_5533MF, + .decoder = EM28XX_SAA711X, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + .aout = EM28XX_AOUT_MONO | /* I2S */ + EM28XX_AOUT_MASTER, /* Line out pin */ + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + } }, + }, [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { .name = "Pixelview Prolink PlayTV USB 2.0", .tda9887_conf = TDA9887_PRESENT, @@ -1350,6 +1371,7 @@ MODULE_DEVICE_TABLE(usb, em28xx_id_table); static struct em28xx_hash_table em28xx_eeprom_hash [] = { /* P/N: SA 60002070465 Tuner: TVF7533-MF */ {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, + {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, }; diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 58a3675abb62..317512da9824 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -99,6 +99,7 @@ #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 #define EM2874_BOARD_PINNACLE_PCTV_80E 59 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 60 +#define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2 61 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 -- cgit v1.2.3 From e890759220759dfe4f3bea91a2deafb565ec10e9 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 29 Dec 2008 22:34:35 -0300 Subject: V4L/DVB (10120): em28xx: remove redundant Pinnacle Dazzle DVC 100 profile The DVC 100 profile is redundant since we already have an existing identical profile named "Pinnacle Dazzle DVC 90/DVC 100" Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 1 - drivers/media/video/em28xx/em28xx-cards.c | 14 -------------- drivers/media/video/em28xx/em28xx.h | 1 - 3 files changed, 16 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 96b1eb8ac874..79fd7f97a366 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -27,7 +27,6 @@ 26 -> Hercules Smart TV USB 2.0 (em2820/em2840) 27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) (em2820/em2840) 28 -> Leadtek Winfast USB II Deluxe (em2820/em2840) - 29 -> Pinnacle Dazzle DVC 100 (em2820/em2840) 30 -> Videology 20K14XUSB USB2.0 (em2820/em2840) 31 -> Usbgear VD204v9 (em2821) 32 -> Supercomp USB 2.0 TV (em2821) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index c427c0eeba1d..41d86e6f69c4 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -339,20 +339,6 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_LINE_IN, } }, }, - [EM2820_BOARD_PINNACLE_DVC_100] = { - .name = "Pinnacle Dazzle DVC 100", - .decoder = EM28XX_SAA711X, - .tuner_type = TUNER_ABSENT, /* Capture only device */ - .input = { { - .type = EM28XX_VMUX_COMPOSITE1, - .vmux = SAA7115_COMPOSITE0, - .amux = EM28XX_AMUX_LINE_IN, - }, { - .type = EM28XX_VMUX_SVIDEO, - .vmux = SAA7115_SVIDEO3, - .amux = EM28XX_AMUX_LINE_IN, - } }, - }, [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { .name = "Videology 20K14XUSB USB2.0", .valid = EM28XX_BOARD_NOT_VALIDATED, diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 317512da9824..650f4ec82185 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -67,7 +67,6 @@ #define EM2820_BOARD_HERCULES_SMART_TV_USB2 26 #define EM2820_BOARD_PINNACLE_USB_2_FM1216ME 27 #define EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE 28 -#define EM2820_BOARD_PINNACLE_DVC_100 29 #define EM2820_BOARD_VIDEOLOGY_20K14XUSB 30 #define EM2821_BOARD_USBGEAR_VD204 31 #define EM2821_BOARD_SUPERCOMP_USB_2 32 -- cgit v1.2.3 From 7ed3a7a3113a5399a4591fdf1f2a07c9cd954853 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 29 Dec 2008 22:39:42 -0300 Subject: V4L/DVB (10121): em28xx: remove worthless Pinnacle PCTV HD Mini 80e device profile The Pinnacle 80e cannot be supported since Micronas yanked their driver support for the drx-j chipset at the last minute. Remove the device profile since it cannot work without the drx driver and it being there is only likely to confuse people into thinking the device is supported but not working. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 1 - drivers/media/video/em28xx/em28xx-cards.c | 34 ------------------------------- drivers/media/video/em28xx/em28xx.h | 1 - 3 files changed, 36 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 79fd7f97a366..75bded8a4aa2 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -56,6 +56,5 @@ 56 -> Pinnacle Hybrid Pro (2) (em2882) [2304:0226] 57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316] 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] - 59 -> Pinnacle PCTV HD Mini (em2874) [2304:023f] 60 -> Hauppauge WinTV HVR 850 (em2883) [2040:651f] 61 -> Pixelview PlayTV Box 4 USB 2.0 (em2820/em2840) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 41d86e6f69c4..84191c9dc54d 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -110,17 +110,6 @@ static struct em28xx_reg_seq default_tuner_gpio[] = { { -1, -1, -1, -1}, }; -/* Pinnacle PCTV HD Mini (80e) GPIOs - 0-5: not used - 6: demod reset, active low - 7: LED on, active high */ -static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = { - {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ - {EM2874_R80_GPIO, 0x80, 0xff, 100},/*Demod reset*/ - {EM2874_R80_GPIO, 0xc0, 0xff, 10}, - { -1, -1, -1, -1}, -}; - /* * Board definitions */ @@ -1228,27 +1217,6 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_LINE_IN, } }, }, - - /* em2874 tuners are DVB only */ - - [EM2874_BOARD_PINNACLE_PCTV_80E] = { - .name = "Pinnacle PCTV HD Mini", - .tuner_type = TUNER_ABSENT, - .has_dvb = 1, - .dvb_gpio = em2874_pinnacle_80e_digital, - .ir_codes = ir_codes_pinnacle_pctv_hd, - .decoder = EM28XX_NODECODER, - .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | - EM2874_I2C_SECONDARY_BUS_SELECT | - EM28XX_I2C_FREQ_400_KHZ, -#ifdef DJH_DEBUG - .input = { { - .type = EM28XX_VMUX_TELEVISION, - .vmux = TVP5150_COMPOSITE0, - .amux = EM28XX_AMUX_LINE_IN, - } }, -#endif - }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1342,8 +1310,6 @@ struct usb_device_id em28xx_id_table [] = { .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO }, { USB_DEVICE(0x2304, 0x0227), .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, - { USB_DEVICE(0x2304, 0x023f), - .driver_info = EM2874_BOARD_PINNACLE_PCTV_80E }, { USB_DEVICE(0x0413, 0x6023), .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, { USB_DEVICE(0x093b, 0xa005), diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 650f4ec82185..b5eddc26388e 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -96,7 +96,6 @@ #define EM2882_BOARD_PINNACLE_HYBRID_PRO 56 #define EM2883_BOARD_KWORLD_HYBRID_A316 57 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 -#define EM2874_BOARD_PINNACLE_PCTV_80E 59 #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 60 #define EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2 61 -- cgit v1.2.3 From aa16c10a347e887ec9505de9eacf3675938be722 Mon Sep 17 00:00:00 2001 From: Németh Márton Date: Mon, 29 Dec 2008 16:37:14 -0300 Subject: V4L/DVB (10128): modify V4L documentation to be a valid XHTML MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Modify Documentation/video4linux/API.html to be a valid XHTML 1.0 Strict. The result was verified using the http://validator.w3.org/ service. Signed-off-by: Márton Németh Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/API.html | 43 ++++++++++++++++++++++++-------------- 1 file changed, 27 insertions(+), 16 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/API.html b/Documentation/video4linux/API.html index afbe9ae7ee96..d749d41f647b 100644 --- a/Documentation/video4linux/API.html +++ b/Documentation/video4linux/API.html @@ -1,16 +1,27 @@ -V4L API -

Video For Linux APIs

- - - -
- -V4L original API - -Obsoleted by V4L2 API -
- -V4L2 API - -Should be used for new projects -
+ + + + + V4L API + + +

Video For Linux APIs

+ + + + + + + + + +
+ V4L original API + + Obsoleted by V4L2 API +
+ V4L2 API + Should be used for new projects +
+ + -- cgit v1.2.3 From c3673464ebc004a3d82063cd41b9cf74d1b55db2 Mon Sep 17 00:00:00 2001 From: Karen Xie Date: Tue, 9 Dec 2008 14:15:32 -0800 Subject: [SCSI] cxgb3i: Add cxgb3i iSCSI driver. This patch implements the cxgb3i iscsi connection acceleration for the open-iscsi initiator. The cxgb3i driver offers the iscsi PDU based offload: - digest insertion and verification - payload direct-placement into host memory buffer. Signed-off-by: Karen Xie Signed-off-by: James Bottomley --- Documentation/scsi/cxgb3i.txt | 85 ++ drivers/scsi/Kconfig | 2 + drivers/scsi/Makefile | 1 + drivers/scsi/cxgb3i/Kbuild | 4 + drivers/scsi/cxgb3i/Kconfig | 6 + drivers/scsi/cxgb3i/cxgb3i.h | 139 +++ drivers/scsi/cxgb3i/cxgb3i_ddp.c | 770 +++++++++++++++ drivers/scsi/cxgb3i/cxgb3i_ddp.h | 306 ++++++ drivers/scsi/cxgb3i/cxgb3i_init.c | 107 ++ drivers/scsi/cxgb3i/cxgb3i_iscsi.c | 951 ++++++++++++++++++ drivers/scsi/cxgb3i/cxgb3i_offload.c | 1810 ++++++++++++++++++++++++++++++++++ drivers/scsi/cxgb3i/cxgb3i_offload.h | 231 +++++ drivers/scsi/cxgb3i/cxgb3i_pdu.c | 402 ++++++++ drivers/scsi/cxgb3i/cxgb3i_pdu.h | 59 ++ 14 files changed, 4873 insertions(+) create mode 100644 Documentation/scsi/cxgb3i.txt create mode 100644 drivers/scsi/cxgb3i/Kbuild create mode 100644 drivers/scsi/cxgb3i/Kconfig create mode 100644 drivers/scsi/cxgb3i/cxgb3i.h create mode 100644 drivers/scsi/cxgb3i/cxgb3i_ddp.c create mode 100644 drivers/scsi/cxgb3i/cxgb3i_ddp.h create mode 100644 drivers/scsi/cxgb3i/cxgb3i_init.c create mode 100644 drivers/scsi/cxgb3i/cxgb3i_iscsi.c create mode 100644 drivers/scsi/cxgb3i/cxgb3i_offload.c create mode 100644 drivers/scsi/cxgb3i/cxgb3i_offload.h create mode 100644 drivers/scsi/cxgb3i/cxgb3i_pdu.c create mode 100644 drivers/scsi/cxgb3i/cxgb3i_pdu.h (limited to 'Documentation') diff --git a/Documentation/scsi/cxgb3i.txt b/Documentation/scsi/cxgb3i.txt new file mode 100644 index 000000000000..8141fa01978e --- /dev/null +++ b/Documentation/scsi/cxgb3i.txt @@ -0,0 +1,85 @@ +Chelsio S3 iSCSI Driver for Linux + +Introduction +============ + +The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc. +series of products) supports iSCSI acceleration and iSCSI Direct Data Placement +(DDP) where the hardware handles the expensive byte touching operations, such +as CRC computation and verification, and direct DMA to the final host memory +destination: + + - iSCSI PDU digest generation and verification + + On transmitting, Chelsio S3 h/w computes and inserts the Header and + Data digest into the PDUs. + On receiving, Chelsio S3 h/w computes and verifies the Header and + Data digest of the PDUs. + + - Direct Data Placement (DDP) + + S3 h/w can directly place the iSCSI Data-In or Data-Out PDU's + payload into pre-posted final destination host-memory buffers based + on the Initiator Task Tag (ITT) in Data-In or Target Task Tag (TTT) + in Data-Out PDUs. + + - PDU Transmit and Recovery + + On transmitting, S3 h/w accepts the complete PDU (header + data) + from the host driver, computes and inserts the digests, decomposes + the PDU into multiple TCP segments if necessary, and transmit all + the TCP segments onto the wire. It handles TCP retransmission if + needed. + + On receving, S3 h/w recovers the iSCSI PDU by reassembling TCP + segments, separating the header and data, calculating and verifying + the digests, then forwards the header to the host. The payload data, + if possible, will be directly placed into the pre-posted host DDP + buffer. Otherwise, the payload data will be sent to the host too. + +The cxgb3i driver interfaces with open-iscsi initiator and provides the iSCSI +acceleration through Chelsio hardware wherever applicable. + +Using the cxgb3i Driver +======================= + +The following steps need to be taken to accelerates the open-iscsi initiator: + +1. Load the cxgb3i driver: "modprobe cxgb3i" + + The cxgb3i module registers a new transport class "cxgb3i" with open-iscsi. + + * in the case of recompiling the kernel, the cxgb3i selection is located at + Device Drivers + SCSI device support ---> + [*] SCSI low-level drivers ---> + Chelsio S3xx iSCSI support + +2. Create an interface file located under /etc/iscsi/ifaces/ for the new + transport class "cxgb3i". + + The content of the file should be in the following format: + iface.transport_name = cxgb3i + iface.net_ifacename = + iface.ipaddress = + + * if iface.ipaddress is specified, needs to be either the + same as the ethX's ip address or an address on the same subnet. Make + sure the ip address is unique in the network. + +3. edit /etc/iscsi/iscsid.conf + The default setting for MaxRecvDataSegmentLength (131072) is too big, + replace "node.conn[0].iscsi.MaxRecvDataSegmentLength" to be a value no + bigger than 15360 (for example 8192): + + node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192 + + * The login would fail for a normal session if MaxRecvDataSegmentLength is + too big. A error message in the format of + "cxgb3i: ERR! MaxRecvSegmentLength too big. Need to be <= ." + would be logged to dmesg. + +4. To direct open-iscsi traffic to go through cxgb3i's accelerated path, + "-I " option needs to be specified with most of the + iscsiadm command. is the transport interface file created + in step 2. diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 673463e4bbf0..0e5e084dfb4c 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -352,6 +352,8 @@ config ISCSI_TCP http://open-iscsi.org +source "drivers/scsi/cxgb3i/Kconfig" + config SGIWD93_SCSI tristate "SGI WD93C93 SCSI Driver" depends on SGI_HAS_WD93 && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 07d0f58de9bb..1410697257cb 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -126,6 +126,7 @@ obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o obj-$(CONFIG_SCSI_STEX) += stex.o obj-$(CONFIG_SCSI_MVSAS) += mvsas.o obj-$(CONFIG_PS3_ROM) += ps3rom.o +obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgb3i/ obj-$(CONFIG_ARM) += arm/ diff --git a/drivers/scsi/cxgb3i/Kbuild b/drivers/scsi/cxgb3i/Kbuild new file mode 100644 index 000000000000..ee7d6d2f9c3b --- /dev/null +++ b/drivers/scsi/cxgb3i/Kbuild @@ -0,0 +1,4 @@ +EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/cxgb3 + +cxgb3i-y := cxgb3i_init.o cxgb3i_iscsi.o cxgb3i_pdu.o cxgb3i_offload.o +obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i_ddp.o cxgb3i.o diff --git a/drivers/scsi/cxgb3i/Kconfig b/drivers/scsi/cxgb3i/Kconfig new file mode 100644 index 000000000000..276281460ece --- /dev/null +++ b/drivers/scsi/cxgb3i/Kconfig @@ -0,0 +1,6 @@ +config SCSI_CXGB3_ISCSI + tristate "Chelsio S3xx iSCSI support" + select CHELSIO_T3 + select SCSI_ISCSI_ATTRS + ---help--- + This driver supports iSCSI offload for the Chelsio S3 series devices. diff --git a/drivers/scsi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgb3i/cxgb3i.h new file mode 100644 index 000000000000..fde6e4c634e7 --- /dev/null +++ b/drivers/scsi/cxgb3i/cxgb3i.h @@ -0,0 +1,139 @@ +/* + * cxgb3i.h: Chelsio S3xx iSCSI driver. + * + * Copyright (c) 2008 Chelsio Communications, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Karen Xie (kxie@chelsio.com) + */ + +#ifndef __CXGB3I_H__ +#define __CXGB3I_H__ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* from cxgb3 LLD */ +#include "common.h" +#include "t3_cpl.h" +#include "t3cdev.h" +#include "cxgb3_ctl_defs.h" +#include "cxgb3_offload.h" +#include "firmware_exports.h" + +#include "cxgb3i_offload.h" +#include "cxgb3i_ddp.h" + +#define CXGB3I_SCSI_QDEPTH_DFLT 128 +#define CXGB3I_MAX_TARGET CXGB3I_MAX_CONN +#define CXGB3I_MAX_LUN 512 +#define ISCSI_PDU_NONPAYLOAD_MAX \ + (sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE + 2*ISCSI_DIGEST_SIZE) + +struct cxgb3i_adapter; +struct cxgb3i_hba; +struct cxgb3i_endpoint; + +/** + * struct cxgb3i_hba - cxgb3i iscsi structure (per port) + * + * @snic: cxgb3i adapter containing this port + * @ndev: pointer to netdev structure + * @shost: pointer to scsi host structure + */ +struct cxgb3i_hba { + struct cxgb3i_adapter *snic; + struct net_device *ndev; + struct Scsi_Host *shost; +}; + +/** + * struct cxgb3i_adapter - cxgb3i adapter structure (per pci) + * + * @listhead: list head to link elements + * @lock: lock for this structure + * @tdev: pointer to t3cdev used by cxgb3 driver + * @pdev: pointer to pci dev + * @hba_cnt: # of hbas (the same as # of ports) + * @hba: all the hbas on this adapter + * @tx_max_size: max. tx packet size supported + * @rx_max_size: max. rx packet size supported + * @tag_format: ddp tag format settings + */ +struct cxgb3i_adapter { + struct list_head list_head; + spinlock_t lock; + struct t3cdev *tdev; + struct pci_dev *pdev; + unsigned char hba_cnt; + struct cxgb3i_hba *hba[MAX_NPORTS]; + + unsigned int tx_max_size; + unsigned int rx_max_size; + + struct cxgb3i_tag_format tag_format; +}; + +/** + * struct cxgb3i_conn - cxgb3i iscsi connection + * + * @listhead: list head to link elements + * @cep: pointer to iscsi_endpoint structure + * @conn: pointer to iscsi_conn structure + * @hba: pointer to the hba this conn. is going through + * @task_idx_bits: # of bits needed for session->cmds_max + */ +struct cxgb3i_conn { + struct list_head list_head; + struct cxgb3i_endpoint *cep; + struct iscsi_conn *conn; + struct cxgb3i_hba *hba; + unsigned int task_idx_bits; +}; + +/** + * struct cxgb3i_endpoint - iscsi tcp endpoint + * + * @c3cn: the h/w tcp connection representation + * @hba: pointer to the hba this conn. is going through + * @cconn: pointer to the associated cxgb3i iscsi connection + */ +struct cxgb3i_endpoint { + struct s3_conn *c3cn; + struct cxgb3i_hba *hba; + struct cxgb3i_conn *cconn; +}; + +int cxgb3i_iscsi_init(void); +void cxgb3i_iscsi_cleanup(void); + +struct cxgb3i_adapter *cxgb3i_adapter_add(struct t3cdev *); +void cxgb3i_adapter_remove(struct t3cdev *); +int cxgb3i_adapter_ulp_init(struct cxgb3i_adapter *); +void cxgb3i_adapter_ulp_cleanup(struct cxgb3i_adapter *); + +struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *); +struct cxgb3i_hba *cxgb3i_hba_host_add(struct cxgb3i_adapter *, + struct net_device *); +void cxgb3i_hba_host_remove(struct cxgb3i_hba *); + +int cxgb3i_pdu_init(void); +void cxgb3i_pdu_cleanup(void); +void cxgb3i_conn_cleanup_task(struct iscsi_task *); +int cxgb3i_conn_alloc_pdu(struct iscsi_task *, u8); +int cxgb3i_conn_init_pdu(struct iscsi_task *, unsigned int, unsigned int); +int cxgb3i_conn_xmit_pdu(struct iscsi_task *); + +void cxgb3i_release_itt(struct iscsi_task *task, itt_t hdr_itt); +int cxgb3i_reserve_itt(struct iscsi_task *task, itt_t *hdr_itt); + +#endif diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.c b/drivers/scsi/cxgb3i/cxgb3i_ddp.c new file mode 100644 index 000000000000..1a41f04264f7 --- /dev/null +++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.c @@ -0,0 +1,770 @@ +/* + * cxgb3i_ddp.c: Chelsio S3xx iSCSI DDP Manager. + * + * Copyright (c) 2008 Chelsio Communications, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Karen Xie (kxie@chelsio.com) + */ + +#include + +/* from cxgb3 LLD */ +#include "common.h" +#include "t3_cpl.h" +#include "t3cdev.h" +#include "cxgb3_ctl_defs.h" +#include "cxgb3_offload.h" +#include "firmware_exports.h" + +#include "cxgb3i_ddp.h" + +#define DRV_MODULE_NAME "cxgb3i_ddp" +#define DRV_MODULE_VERSION "1.0.0" +#define DRV_MODULE_RELDATE "Dec. 1, 2008" + +static char version[] = + "Chelsio S3xx iSCSI DDP " DRV_MODULE_NAME + " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; + +MODULE_AUTHOR("Karen Xie "); +MODULE_DESCRIPTION("cxgb3i ddp pagepod manager"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); + +#define ddp_log_error(fmt...) printk(KERN_ERR "cxgb3i_ddp: ERR! " fmt) +#define ddp_log_warn(fmt...) printk(KERN_WARNING "cxgb3i_ddp: WARN! " fmt) +#define ddp_log_info(fmt...) printk(KERN_INFO "cxgb3i_ddp: " fmt) + +#ifdef __DEBUG_CXGB3I_DDP__ +#define ddp_log_debug(fmt, args...) \ + printk(KERN_INFO "cxgb3i_ddp: %s - " fmt, __func__ , ## args) +#else +#define ddp_log_debug(fmt...) +#endif + +/* + * iSCSI Direct Data Placement + * + * T3 h/w can directly place the iSCSI Data-In or Data-Out PDU's payload into + * pre-posted final destination host-memory buffers based on the Initiator + * Task Tag (ITT) in Data-In or Target Task Tag (TTT) in Data-Out PDUs. + * + * The host memory address is programmed into h/w in the format of pagepod + * entries. + * The location of the pagepod entry is encoded into ddp tag which is used or + * is the base for ITT/TTT. + */ + +#define DDP_PGIDX_MAX 4 +#define DDP_THRESHOLD 2048 +static unsigned char ddp_page_order[DDP_PGIDX_MAX] = {0, 1, 2, 4}; +static unsigned char ddp_page_shift[DDP_PGIDX_MAX] = {12, 13, 14, 16}; +static unsigned char page_idx = DDP_PGIDX_MAX; + +static LIST_HEAD(cxgb3i_ddp_list); +static DEFINE_RWLOCK(cxgb3i_ddp_rwlock); + +/* + * functions to program the pagepod in h/w + */ +static inline void ulp_mem_io_set_hdr(struct sk_buff *skb, unsigned int addr) +{ + struct ulp_mem_io *req = (struct ulp_mem_io *)skb->head; + + req->wr.wr_lo = 0; + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_BYPASS)); + req->cmd_lock_addr = htonl(V_ULP_MEMIO_ADDR(addr >> 5) | + V_ULPTX_CMD(ULP_MEM_WRITE)); + req->len = htonl(V_ULP_MEMIO_DATA_LEN(PPOD_SIZE >> 5) | + V_ULPTX_NFLITS((PPOD_SIZE >> 3) + 1)); +} + +static int set_ddp_map(struct cxgb3i_ddp_info *ddp, struct pagepod_hdr *hdr, + unsigned int idx, unsigned int npods, + struct cxgb3i_gather_list *gl) +{ + unsigned int pm_addr = (idx << PPOD_SIZE_SHIFT) + ddp->llimit; + int i; + + for (i = 0; i < npods; i++, idx++, pm_addr += PPOD_SIZE) { + struct sk_buff *skb = ddp->gl_skb[idx]; + struct pagepod *ppod; + int j, pidx; + + /* hold on to the skb until we clear the ddp mapping */ + skb_get(skb); + + ulp_mem_io_set_hdr(skb, pm_addr); + ppod = (struct pagepod *) + (skb->head + sizeof(struct ulp_mem_io)); + memcpy(&(ppod->hdr), hdr, sizeof(struct pagepod)); + for (pidx = 4 * i, j = 0; j < 5; ++j, ++pidx) + ppod->addr[j] = pidx < gl->nelem ? + cpu_to_be64(gl->phys_addr[pidx]) : 0UL; + + skb->priority = CPL_PRIORITY_CONTROL; + cxgb3_ofld_send(ddp->tdev, skb); + } + return 0; +} + +static int clear_ddp_map(struct cxgb3i_ddp_info *ddp, unsigned int idx, + unsigned int npods) +{ + unsigned int pm_addr = (idx << PPOD_SIZE_SHIFT) + ddp->llimit; + int i; + + for (i = 0; i < npods; i++, idx++, pm_addr += PPOD_SIZE) { + struct sk_buff *skb = ddp->gl_skb[idx]; + + ddp->gl_skb[idx] = NULL; + memset((skb->head + sizeof(struct ulp_mem_io)), 0, PPOD_SIZE); + ulp_mem_io_set_hdr(skb, pm_addr); + skb->priority = CPL_PRIORITY_CONTROL; + cxgb3_ofld_send(ddp->tdev, skb); + } + return 0; +} + +static inline int ddp_find_unused_entries(struct cxgb3i_ddp_info *ddp, + int start, int max, int count, + struct cxgb3i_gather_list *gl) +{ + unsigned int i, j; + + spin_lock(&ddp->map_lock); + for (i = start; i <= max;) { + for (j = 0; j < count; j++) { + if (ddp->gl_map[i + j]) + break; + } + if (j == count) { + for (j = 0; j < count; j++) + ddp->gl_map[i + j] = gl; + spin_unlock(&ddp->map_lock); + return i; + } + i += j + 1; + } + spin_unlock(&ddp->map_lock); + return -EBUSY; +} + +static inline void ddp_unmark_entries(struct cxgb3i_ddp_info *ddp, + int start, int count) +{ + spin_lock(&ddp->map_lock); + memset(&ddp->gl_map[start], 0, + count * sizeof(struct cxgb3i_gather_list *)); + spin_unlock(&ddp->map_lock); +} + +static inline void ddp_free_gl_skb(struct cxgb3i_ddp_info *ddp, + int idx, int count) +{ + int i; + + for (i = 0; i < count; i++, idx++) + if (ddp->gl_skb[idx]) { + kfree_skb(ddp->gl_skb[idx]); + ddp->gl_skb[idx] = NULL; + } +} + +static inline int ddp_alloc_gl_skb(struct cxgb3i_ddp_info *ddp, int idx, + int count, gfp_t gfp) +{ + int i; + + for (i = 0; i < count; i++) { + struct sk_buff *skb = alloc_skb(sizeof(struct ulp_mem_io) + + PPOD_SIZE, gfp); + if (skb) { + ddp->gl_skb[idx + i] = skb; + skb_put(skb, sizeof(struct ulp_mem_io) + PPOD_SIZE); + } else { + ddp_free_gl_skb(ddp, idx, i); + return -ENOMEM; + } + } + return 0; +} + +/** + * cxgb3i_ddp_find_page_index - return ddp page index for a given page size. + * @pgsz: page size + * return the ddp page index, if no match is found return DDP_PGIDX_MAX. + */ +int cxgb3i_ddp_find_page_index(unsigned long pgsz) +{ + int i; + + for (i = 0; i < DDP_PGIDX_MAX; i++) { + if (pgsz == (1UL << ddp_page_shift[i])) + return i; + } + ddp_log_debug("ddp page size 0x%lx not supported.\n", pgsz); + return DDP_PGIDX_MAX; +} +EXPORT_SYMBOL_GPL(cxgb3i_ddp_find_page_index); + +static inline void ddp_gl_unmap(struct pci_dev *pdev, + struct cxgb3i_gather_list *gl) +{ + int i; + + for (i = 0; i < gl->nelem; i++) + pci_unmap_page(pdev, gl->phys_addr[i], PAGE_SIZE, + PCI_DMA_FROMDEVICE); +} + +static inline int ddp_gl_map(struct pci_dev *pdev, + struct cxgb3i_gather_list *gl) +{ + int i; + + for (i = 0; i < gl->nelem; i++) { + gl->phys_addr[i] = pci_map_page(pdev, gl->pages[i], 0, + PAGE_SIZE, + PCI_DMA_FROMDEVICE); + if (unlikely(pci_dma_mapping_error(pdev, gl->phys_addr[i]))) + goto unmap; + } + + return i; + +unmap: + if (i) { + unsigned int nelem = gl->nelem; + + gl->nelem = i; + ddp_gl_unmap(pdev, gl); + gl->nelem = nelem; + } + return -ENOMEM; +} + +/** + * cxgb3i_ddp_make_gl - build ddp page buffer list + * @xferlen: total buffer length + * @sgl: page buffer scatter-gather list + * @sgcnt: # of page buffers + * @pdev: pci_dev, used for pci map + * @gfp: allocation mode + * + * construct a ddp page buffer list from the scsi scattergather list. + * coalesce buffers as much as possible, and obtain dma addresses for + * each page. + * + * Return the cxgb3i_gather_list constructed from the page buffers if the + * memory can be used for ddp. Return NULL otherwise. + */ +struct cxgb3i_gather_list *cxgb3i_ddp_make_gl(unsigned int xferlen, + struct scatterlist *sgl, + unsigned int sgcnt, + struct pci_dev *pdev, + gfp_t gfp) +{ + struct cxgb3i_gather_list *gl; + struct scatterlist *sg = sgl; + struct page *sgpage = sg_page(sg); + unsigned int sglen = sg->length; + unsigned int sgoffset = sg->offset; + unsigned int npages = (xferlen + sgoffset + PAGE_SIZE - 1) >> + PAGE_SHIFT; + int i = 1, j = 0; + + if (xferlen < DDP_THRESHOLD) { + ddp_log_debug("xfer %u < threshold %u, no ddp.\n", + xferlen, DDP_THRESHOLD); + return NULL; + } + + gl = kzalloc(sizeof(struct cxgb3i_gather_list) + + npages * (sizeof(dma_addr_t) + sizeof(struct page *)), + gfp); + if (!gl) + return NULL; + + gl->pages = (struct page **)&gl->phys_addr[npages]; + gl->length = xferlen; + gl->offset = sgoffset; + gl->pages[0] = sgpage; + + sg = sg_next(sg); + while (sg) { + struct page *page = sg_page(sg); + + if (sgpage == page && sg->offset == sgoffset + sglen) + sglen += sg->length; + else { + /* make sure the sgl is fit for ddp: + * each has the same page size, and + * all of the middle pages are used completely + */ + if ((j && sgoffset) || + ((i != sgcnt - 1) && + ((sglen + sgoffset) & ~PAGE_MASK))) + goto error_out; + + j++; + if (j == gl->nelem || sg->offset) + goto error_out; + gl->pages[j] = page; + sglen = sg->length; + sgoffset = sg->offset; + sgpage = page; + } + i++; + sg = sg_next(sg); + } + gl->nelem = ++j; + + if (ddp_gl_map(pdev, gl) < 0) + goto error_out; + + return gl; + +error_out: + kfree(gl); + return NULL; +} +EXPORT_SYMBOL_GPL(cxgb3i_ddp_make_gl); + +/** + * cxgb3i_ddp_release_gl - release a page buffer list + * @gl: a ddp page buffer list + * @pdev: pci_dev used for pci_unmap + * free a ddp page buffer list resulted from cxgb3i_ddp_make_gl(). + */ +void cxgb3i_ddp_release_gl(struct cxgb3i_gather_list *gl, + struct pci_dev *pdev) +{ + ddp_gl_unmap(pdev, gl); + kfree(gl); +} +EXPORT_SYMBOL_GPL(cxgb3i_ddp_release_gl); + +/** + * cxgb3i_ddp_tag_reserve - set up ddp for a data transfer + * @tdev: t3cdev adapter + * @tid: connection id + * @tformat: tag format + * @tagp: the s/w tag, if ddp setup is successful, it will be updated with + * ddp/hw tag + * @gl: the page momory list + * @gfp: allocation mode + * + * ddp setup for a given page buffer list and construct the ddp tag. + * return 0 if success, < 0 otherwise. + */ +int cxgb3i_ddp_tag_reserve(struct t3cdev *tdev, unsigned int tid, + struct cxgb3i_tag_format *tformat, u32 *tagp, + struct cxgb3i_gather_list *gl, gfp_t gfp) +{ + struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi; + struct pagepod_hdr hdr; + unsigned int npods; + int idx = -1, idx_max; + int err = -ENOMEM; + u32 sw_tag = *tagp; + u32 tag; + + if (page_idx >= DDP_PGIDX_MAX || !ddp || !gl || !gl->nelem || + gl->length < DDP_THRESHOLD) { + ddp_log_debug("pgidx %u, xfer %u/%u, NO ddp.\n", + page_idx, gl->length, DDP_THRESHOLD); + return -EINVAL; + } + + npods = (gl->nelem + PPOD_PAGES_MAX - 1) >> PPOD_PAGES_SHIFT; + idx_max = ddp->nppods - npods + 1; + + if (ddp->idx_last == ddp->nppods) + idx = ddp_find_unused_entries(ddp, 0, idx_max, npods, gl); + else { + idx = ddp_find_unused_entries(ddp, ddp->idx_last + 1, + idx_max, npods, gl); + if (idx < 0 && ddp->idx_last >= npods) + idx = ddp_find_unused_entries(ddp, 0, + ddp->idx_last - npods + 1, + npods, gl); + } + if (idx < 0) { + ddp_log_debug("xferlen %u, gl %u, npods %u NO DDP.\n", + gl->length, gl->nelem, npods); + return idx; + } + + err = ddp_alloc_gl_skb(ddp, idx, npods, gfp); + if (err < 0) + goto unmark_entries; + + tag = cxgb3i_ddp_tag_base(tformat, sw_tag); + tag |= idx << PPOD_IDX_SHIFT; + + hdr.rsvd = 0; + hdr.vld_tid = htonl(F_PPOD_VALID | V_PPOD_TID(tid)); + hdr.pgsz_tag_clr = htonl(tag & ddp->rsvd_tag_mask); + hdr.maxoffset = htonl(gl->length); + hdr.pgoffset = htonl(gl->offset); + + err = set_ddp_map(ddp, &hdr, idx, npods, gl); + if (err < 0) + goto free_gl_skb; + + ddp->idx_last = idx; + ddp_log_debug("xfer %u, gl %u,%u, tid 0x%x, 0x%x -> 0x%x(%u,%u).\n", + gl->length, gl->nelem, gl->offset, tid, sw_tag, tag, + idx, npods); + *tagp = tag; + return 0; + +free_gl_skb: + ddp_free_gl_skb(ddp, idx, npods); +unmark_entries: + ddp_unmark_entries(ddp, idx, npods); + return err; +} +EXPORT_SYMBOL_GPL(cxgb3i_ddp_tag_reserve); + +/** + * cxgb3i_ddp_tag_release - release a ddp tag + * @tdev: t3cdev adapter + * @tag: ddp tag + * ddp cleanup for a given ddp tag and release all the resources held + */ +void cxgb3i_ddp_tag_release(struct t3cdev *tdev, u32 tag) +{ + struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi; + u32 idx; + + if (!ddp) { + ddp_log_error("release ddp tag 0x%x, ddp NULL.\n", tag); + return; + } + + idx = (tag >> PPOD_IDX_SHIFT) & ddp->idx_mask; + if (idx < ddp->nppods) { + struct cxgb3i_gather_list *gl = ddp->gl_map[idx]; + unsigned int npods; + + if (!gl) { + ddp_log_error("release ddp 0x%x, idx 0x%x, gl NULL.\n", + tag, idx); + return; + } + npods = (gl->nelem + PPOD_PAGES_MAX - 1) >> PPOD_PAGES_SHIFT; + ddp_log_debug("ddp tag 0x%x, release idx 0x%x, npods %u.\n", + tag, idx, npods); + clear_ddp_map(ddp, idx, npods); + ddp_unmark_entries(ddp, idx, npods); + cxgb3i_ddp_release_gl(gl, ddp->pdev); + } else + ddp_log_error("ddp tag 0x%x, idx 0x%x > max 0x%x.\n", + tag, idx, ddp->nppods); +} +EXPORT_SYMBOL_GPL(cxgb3i_ddp_tag_release); + +static int setup_conn_pgidx(struct t3cdev *tdev, unsigned int tid, int pg_idx, + int reply) +{ + struct sk_buff *skb = alloc_skb(sizeof(struct cpl_set_tcb_field), + GFP_KERNEL); + struct cpl_set_tcb_field *req; + u64 val = pg_idx < DDP_PGIDX_MAX ? pg_idx : 0; + + if (!skb) + return -ENOMEM; + + /* set up ulp submode and page size */ + req = (struct cpl_set_tcb_field *)skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid)); + req->reply = V_NO_REPLY(reply ? 0 : 1); + req->cpu_idx = 0; + req->word = htons(31); + req->mask = cpu_to_be64(0xF0000000); + req->val = cpu_to_be64(val << 28); + skb->priority = CPL_PRIORITY_CONTROL; + + cxgb3_ofld_send(tdev, skb); + return 0; +} + +/** + * cxgb3i_setup_conn_host_pagesize - setup the conn.'s ddp page size + * @tdev: t3cdev adapter + * @tid: connection id + * @reply: request reply from h/w + * set up the ddp page size based on the host PAGE_SIZE for a connection + * identified by tid + */ +int cxgb3i_setup_conn_host_pagesize(struct t3cdev *tdev, unsigned int tid, + int reply) +{ + return setup_conn_pgidx(tdev, tid, page_idx, reply); +} +EXPORT_SYMBOL_GPL(cxgb3i_setup_conn_host_pagesize); + +/** + * cxgb3i_setup_conn_pagesize - setup the conn.'s ddp page size + * @tdev: t3cdev adapter + * @tid: connection id + * @reply: request reply from h/w + * @pgsz: ddp page size + * set up the ddp page size for a connection identified by tid + */ +int cxgb3i_setup_conn_pagesize(struct t3cdev *tdev, unsigned int tid, + int reply, unsigned long pgsz) +{ + int pgidx = cxgb3i_ddp_find_page_index(pgsz); + + return setup_conn_pgidx(tdev, tid, pgidx, reply); +} +EXPORT_SYMBOL_GPL(cxgb3i_setup_conn_pagesize); + +/** + * cxgb3i_setup_conn_digest - setup conn. digest setting + * @tdev: t3cdev adapter + * @tid: connection id + * @hcrc: header digest enabled + * @dcrc: data digest enabled + * @reply: request reply from h/w + * set up the iscsi digest settings for a connection identified by tid + */ +int cxgb3i_setup_conn_digest(struct t3cdev *tdev, unsigned int tid, + int hcrc, int dcrc, int reply) +{ + struct sk_buff *skb = alloc_skb(sizeof(struct cpl_set_tcb_field), + GFP_KERNEL); + struct cpl_set_tcb_field *req; + u64 val = (hcrc ? 1 : 0) | (dcrc ? 2 : 0); + + if (!skb) + return -ENOMEM; + + /* set up ulp submode and page size */ + req = (struct cpl_set_tcb_field *)skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid)); + req->reply = V_NO_REPLY(reply ? 0 : 1); + req->cpu_idx = 0; + req->word = htons(31); + req->mask = cpu_to_be64(0x0F000000); + req->val = cpu_to_be64(val << 24); + skb->priority = CPL_PRIORITY_CONTROL; + + cxgb3_ofld_send(tdev, skb); + return 0; +} +EXPORT_SYMBOL_GPL(cxgb3i_setup_conn_digest); + +static int ddp_init(struct t3cdev *tdev) +{ + struct cxgb3i_ddp_info *ddp; + struct ulp_iscsi_info uinfo; + unsigned int ppmax, bits; + int i, err; + static int vers_printed; + + if (!vers_printed) { + printk(KERN_INFO "%s", version); + vers_printed = 1; + } + + err = tdev->ctl(tdev, ULP_ISCSI_GET_PARAMS, &uinfo); + if (err < 0) { + ddp_log_error("%s, failed to get iscsi param err=%d.\n", + tdev->name, err); + return err; + } + + ppmax = (uinfo.ulimit - uinfo.llimit + 1) >> PPOD_SIZE_SHIFT; + bits = __ilog2_u32(ppmax) + 1; + if (bits > PPOD_IDX_MAX_SIZE) + bits = PPOD_IDX_MAX_SIZE; + ppmax = (1 << (bits - 1)) - 1; + + ddp = cxgb3i_alloc_big_mem(sizeof(struct cxgb3i_ddp_info) + + ppmax * + (sizeof(struct cxgb3i_gather_list *) + + sizeof(struct sk_buff *)), + GFP_KERNEL); + if (!ddp) { + ddp_log_warn("%s unable to alloc ddp 0x%d, ddp disabled.\n", + tdev->name, ppmax); + return 0; + } + ddp->gl_map = (struct cxgb3i_gather_list **)(ddp + 1); + ddp->gl_skb = (struct sk_buff **)(((char *)ddp->gl_map) + + ppmax * + sizeof(struct cxgb3i_gather_list *)); + spin_lock_init(&ddp->map_lock); + + ddp->tdev = tdev; + ddp->pdev = uinfo.pdev; + ddp->max_txsz = min_t(unsigned int, uinfo.max_txsz, ULP2_MAX_PKT_SIZE); + ddp->max_rxsz = min_t(unsigned int, uinfo.max_rxsz, ULP2_MAX_PKT_SIZE); + ddp->llimit = uinfo.llimit; + ddp->ulimit = uinfo.ulimit; + ddp->nppods = ppmax; + ddp->idx_last = ppmax; + ddp->idx_bits = bits; + ddp->idx_mask = (1 << bits) - 1; + ddp->rsvd_tag_mask = (1 << (bits + PPOD_IDX_SHIFT)) - 1; + + uinfo.tagmask = ddp->idx_mask << PPOD_IDX_SHIFT; + for (i = 0; i < DDP_PGIDX_MAX; i++) + uinfo.pgsz_factor[i] = ddp_page_order[i]; + uinfo.ulimit = uinfo.llimit + (ppmax << PPOD_SIZE_SHIFT); + + err = tdev->ctl(tdev, ULP_ISCSI_SET_PARAMS, &uinfo); + if (err < 0) { + ddp_log_warn("%s unable to set iscsi param err=%d, " + "ddp disabled.\n", tdev->name, err); + goto free_ddp_map; + } + + tdev->ulp_iscsi = ddp; + + /* add to the list */ + write_lock(&cxgb3i_ddp_rwlock); + list_add_tail(&ddp->list, &cxgb3i_ddp_list); + write_unlock(&cxgb3i_ddp_rwlock); + + ddp_log_info("nppods %u (0x%x ~ 0x%x), bits %u, mask 0x%x,0x%x " + "pkt %u,%u.\n", + ppmax, ddp->llimit, ddp->ulimit, ddp->idx_bits, + ddp->idx_mask, ddp->rsvd_tag_mask, + ddp->max_txsz, ddp->max_rxsz); + return 0; + +free_ddp_map: + cxgb3i_free_big_mem(ddp); + return err; +} + +/** + * cxgb3i_adapter_ddp_init - initialize the adapter's ddp resource + * @tdev: t3cdev adapter + * @tformat: tag format + * @txsz: max tx pkt size, filled in by this func. + * @rxsz: max rx pkt size, filled in by this func. + * initialize the ddp pagepod manager for a given adapter if needed and + * setup the tag format for a given iscsi entity + */ +int cxgb3i_adapter_ddp_init(struct t3cdev *tdev, + struct cxgb3i_tag_format *tformat, + unsigned int *txsz, unsigned int *rxsz) +{ + struct cxgb3i_ddp_info *ddp; + unsigned char idx_bits; + + if (!tformat) + return -EINVAL; + + if (!tdev->ulp_iscsi) { + int err = ddp_init(tdev); + if (err < 0) + return err; + } + ddp = (struct cxgb3i_ddp_info *)tdev->ulp_iscsi; + + idx_bits = 32 - tformat->sw_bits; + tformat->rsvd_bits = ddp->idx_bits; + tformat->rsvd_shift = PPOD_IDX_SHIFT; + tformat->rsvd_mask = (1 << tformat->rsvd_bits) - 1; + + ddp_log_info("tag format: sw %u, rsvd %u,%u, mask 0x%x.\n", + tformat->sw_bits, tformat->rsvd_bits, + tformat->rsvd_shift, tformat->rsvd_mask); + + *txsz = ddp->max_txsz; + *rxsz = ddp->max_rxsz; + ddp_log_info("ddp max pkt size: %u, %u.\n", + ddp->max_txsz, ddp->max_rxsz); + return 0; +} +EXPORT_SYMBOL_GPL(cxgb3i_adapter_ddp_init); + +static void ddp_release(struct cxgb3i_ddp_info *ddp) +{ + int i = 0; + struct t3cdev *tdev = ddp->tdev; + + tdev->ulp_iscsi = NULL; + while (i < ddp->nppods) { + struct cxgb3i_gather_list *gl = ddp->gl_map[i]; + if (gl) { + int npods = (gl->nelem + PPOD_PAGES_MAX - 1) + >> PPOD_PAGES_SHIFT; + + kfree(gl); + ddp_free_gl_skb(ddp, i, npods); + } else + i++; + } + cxgb3i_free_big_mem(ddp); +} + +/** + * cxgb3i_adapter_ddp_cleanup - release the adapter's ddp resource + * @tdev: t3cdev adapter + * release all the resource held by the ddp pagepod manager for a given + * adapter if needed + */ +void cxgb3i_adapter_ddp_cleanup(struct t3cdev *tdev) +{ + struct cxgb3i_ddp_info *ddp; + + /* remove from the list */ + write_lock(&cxgb3i_ddp_rwlock); + list_for_each_entry(ddp, &cxgb3i_ddp_list, list) { + if (ddp->tdev == tdev) { + list_del(&ddp->list); + break; + } + } + write_unlock(&cxgb3i_ddp_rwlock); + + if (ddp) + ddp_release(ddp); +} +EXPORT_SYMBOL_GPL(cxgb3i_adapter_ddp_cleanup); + +/** + * cxgb3i_ddp_init_module - module init entry point + * initialize any driver wide global data structures + */ +static int __init cxgb3i_ddp_init_module(void) +{ + page_idx = cxgb3i_ddp_find_page_index(PAGE_SIZE); + ddp_log_info("system PAGE_SIZE %lu, ddp idx %u.\n", + PAGE_SIZE, page_idx); + return 0; +} + +/** + * cxgb3i_ddp_exit_module - module cleanup/exit entry point + * go through the ddp list and release any resource held. + */ +static void __exit cxgb3i_ddp_exit_module(void) +{ + struct cxgb3i_ddp_info *ddp; + + /* release all ddp manager if there is any */ + write_lock(&cxgb3i_ddp_rwlock); + list_for_each_entry(ddp, &cxgb3i_ddp_list, list) { + list_del(&ddp->list); + ddp_release(ddp); + } + write_unlock(&cxgb3i_ddp_rwlock); +} + +module_init(cxgb3i_ddp_init_module); +module_exit(cxgb3i_ddp_exit_module); diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.h b/drivers/scsi/cxgb3i/cxgb3i_ddp.h new file mode 100644 index 000000000000..5c7c4d95c493 --- /dev/null +++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.h @@ -0,0 +1,306 @@ +/* + * cxgb3i_ddp.h: Chelsio S3xx iSCSI DDP Manager. + * + * Copyright (c) 2008 Chelsio Communications, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Karen Xie (kxie@chelsio.com) + */ + +#ifndef __CXGB3I_ULP2_DDP_H__ +#define __CXGB3I_ULP2_DDP_H__ + +/** + * struct cxgb3i_tag_format - cxgb3i ulp tag format for an iscsi entity + * + * @sw_bits: # of bits used by iscsi software layer + * @rsvd_bits: # of bits used by h/w + * @rsvd_shift: h/w bits shift left + * @rsvd_mask: reserved bit mask + */ +struct cxgb3i_tag_format { + unsigned char sw_bits; + unsigned char rsvd_bits; + unsigned char rsvd_shift; + unsigned char filler[1]; + u32 rsvd_mask; +}; + +/** + * struct cxgb3i_gather_list - cxgb3i direct data placement memory + * + * @tag: ddp tag + * @length: total data buffer length + * @offset: initial offset to the 1st page + * @nelem: # of pages + * @pages: page pointers + * @phys_addr: physical address + */ +struct cxgb3i_gather_list { + u32 tag; + unsigned int length; + unsigned int offset; + unsigned int nelem; + struct page **pages; + dma_addr_t phys_addr[0]; +}; + +/** + * struct cxgb3i_ddp_info - cxgb3i direct data placement for pdu payload + * + * @list: list head to link elements + * @tdev: pointer to t3cdev used by cxgb3 driver + * @max_txsz: max tx packet size for ddp + * @max_rxsz: max rx packet size for ddp + * @llimit: lower bound of the page pod memory + * @ulimit: upper bound of the page pod memory + * @nppods: # of page pod entries + * @idx_last: page pod entry last used + * @idx_bits: # of bits the pagepod index would take + * @idx_mask: pagepod index mask + * @rsvd_tag_mask: tag mask + * @map_lock: lock to synchonize access to the page pod map + * @gl_map: ddp memory gather list + * @gl_skb: skb used to program the pagepod + */ +struct cxgb3i_ddp_info { + struct list_head list; + struct t3cdev *tdev; + struct pci_dev *pdev; + unsigned int max_txsz; + unsigned int max_rxsz; + unsigned int llimit; + unsigned int ulimit; + unsigned int nppods; + unsigned int idx_last; + unsigned char idx_bits; + unsigned char filler[3]; + u32 idx_mask; + u32 rsvd_tag_mask; + spinlock_t map_lock; + struct cxgb3i_gather_list **gl_map; + struct sk_buff **gl_skb; +}; + +#define ULP2_MAX_PKT_SIZE 16224 +#define ULP2_MAX_PDU_PAYLOAD (ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_MAX) +#define PPOD_PAGES_MAX 4 +#define PPOD_PAGES_SHIFT 2 /* 4 pages per pod */ + +/* + * struct pagepod_hdr, pagepod - pagepod format + */ +struct pagepod_hdr { + u32 vld_tid; + u32 pgsz_tag_clr; + u32 maxoffset; + u32 pgoffset; + u64 rsvd; +}; + +struct pagepod { + struct pagepod_hdr hdr; + u64 addr[PPOD_PAGES_MAX + 1]; +}; + +#define PPOD_SIZE sizeof(struct pagepod) /* 64 */ +#define PPOD_SIZE_SHIFT 6 + +#define PPOD_COLOR_SHIFT 0 +#define PPOD_COLOR_SIZE 6 +#define PPOD_COLOR_MASK ((1 << PPOD_COLOR_SIZE) - 1) + +#define PPOD_IDX_SHIFT PPOD_COLOR_SIZE +#define PPOD_IDX_MAX_SIZE 24 + +#define S_PPOD_TID 0 +#define M_PPOD_TID 0xFFFFFF +#define V_PPOD_TID(x) ((x) << S_PPOD_TID) + +#define S_PPOD_VALID 24 +#define V_PPOD_VALID(x) ((x) << S_PPOD_VALID) +#define F_PPOD_VALID V_PPOD_VALID(1U) + +#define S_PPOD_COLOR 0 +#define M_PPOD_COLOR 0x3F +#define V_PPOD_COLOR(x) ((x) << S_PPOD_COLOR) + +#define S_PPOD_TAG 6 +#define M_PPOD_TAG 0xFFFFFF +#define V_PPOD_TAG(x) ((x) << S_PPOD_TAG) + +#define S_PPOD_PGSZ 30 +#define M_PPOD_PGSZ 0x3 +#define V_PPOD_PGSZ(x) ((x) << S_PPOD_PGSZ) + +/* + * large memory chunk allocation/release + * use vmalloc() if kmalloc() fails + */ +static inline void *cxgb3i_alloc_big_mem(unsigned int size, + gfp_t gfp) +{ + void *p = kmalloc(size, gfp); + if (!p) + p = vmalloc(size); + if (p) + memset(p, 0, size); + return p; +} + +static inline void cxgb3i_free_big_mem(void *addr) +{ + if (is_vmalloc_addr(addr)) + vfree(addr); + else + kfree(addr); +} + +/* + * cxgb3i ddp tag are 32 bits, it consists of reserved bits used by h/w and + * non-reserved bits that can be used by the iscsi s/w. + * The reserved bits are identified by the rsvd_bits and rsvd_shift fields + * in struct cxgb3i_tag_format. + * + * The upper most reserved bit can be used to check if a tag is ddp tag or not: + * if the bit is 0, the tag is a valid ddp tag + */ + +/** + * cxgb3i_is_ddp_tag - check if a given tag is a hw/ddp tag + * @tformat: tag format information + * @tag: tag to be checked + * + * return true if the tag is a ddp tag, false otherwise. + */ +static inline int cxgb3i_is_ddp_tag(struct cxgb3i_tag_format *tformat, u32 tag) +{ + return !(tag & (1 << (tformat->rsvd_bits + tformat->rsvd_shift - 1))); +} + +/** + * cxgb3i_sw_tag_usable - check if a given s/w tag has enough bits left for + * the reserved/hw bits + * @tformat: tag format information + * @sw_tag: s/w tag to be checked + * + * return true if the tag is a ddp tag, false otherwise. + */ +static inline int cxgb3i_sw_tag_usable(struct cxgb3i_tag_format *tformat, + u32 sw_tag) +{ + sw_tag >>= (32 - tformat->rsvd_bits); + return !sw_tag; +} + +/** + * cxgb3i_set_non_ddp_tag - mark a given s/w tag as an invalid ddp tag + * @tformat: tag format information + * @sw_tag: s/w tag to be checked + * + * insert 1 at the upper most reserved bit to mark it as an invalid ddp tag. + */ +static inline u32 cxgb3i_set_non_ddp_tag(struct cxgb3i_tag_format *tformat, + u32 sw_tag) +{ + unsigned char shift = tformat->rsvd_bits + tformat->rsvd_shift - 1; + u32 mask = (1 << shift) - 1; + + if (sw_tag && (sw_tag & ~mask)) { + u32 v1 = sw_tag & ((1 << shift) - 1); + u32 v2 = (sw_tag >> (shift - 1)) << shift; + + return v2 | v1 | 1 << shift; + } + return sw_tag | 1 << shift; +} + +/** + * cxgb3i_ddp_tag_base - shift the s/w tag bits so that reserved bits are not + * used. + * @tformat: tag format information + * @sw_tag: s/w tag to be checked + */ +static inline u32 cxgb3i_ddp_tag_base(struct cxgb3i_tag_format *tformat, + u32 sw_tag) +{ + u32 mask = (1 << tformat->rsvd_shift) - 1; + + if (sw_tag && (sw_tag & ~mask)) { + u32 v1 = sw_tag & mask; + u32 v2 = sw_tag >> tformat->rsvd_shift; + + v2 <<= tformat->rsvd_shift + tformat->rsvd_bits; + return v2 | v1; + } + return sw_tag; +} + +/** + * cxgb3i_tag_rsvd_bits - get the reserved bits used by the h/w + * @tformat: tag format information + * @tag: tag to be checked + * + * return the reserved bits in the tag + */ +static inline u32 cxgb3i_tag_rsvd_bits(struct cxgb3i_tag_format *tformat, + u32 tag) +{ + if (cxgb3i_is_ddp_tag(tformat, tag)) + return (tag >> tformat->rsvd_shift) & tformat->rsvd_mask; + return 0; +} + +/** + * cxgb3i_tag_nonrsvd_bits - get the non-reserved bits used by the s/w + * @tformat: tag format information + * @tag: tag to be checked + * + * return the non-reserved bits in the tag. + */ +static inline u32 cxgb3i_tag_nonrsvd_bits(struct cxgb3i_tag_format *tformat, + u32 tag) +{ + unsigned char shift = tformat->rsvd_bits + tformat->rsvd_shift - 1; + u32 v1, v2; + + if (cxgb3i_is_ddp_tag(tformat, tag)) { + v1 = tag & ((1 << tformat->rsvd_shift) - 1); + v2 = (tag >> (shift + 1)) << tformat->rsvd_shift; + } else { + u32 mask = (1 << shift) - 1; + + tag &= ~(1 << shift); + v1 = tag & mask; + v2 = (tag >> 1) & ~mask; + } + return v1 | v2; +} + +int cxgb3i_ddp_tag_reserve(struct t3cdev *, unsigned int tid, + struct cxgb3i_tag_format *, u32 *tag, + struct cxgb3i_gather_list *, gfp_t gfp); +void cxgb3i_ddp_tag_release(struct t3cdev *, u32 tag); + +struct cxgb3i_gather_list *cxgb3i_ddp_make_gl(unsigned int xferlen, + struct scatterlist *sgl, + unsigned int sgcnt, + struct pci_dev *pdev, + gfp_t gfp); +void cxgb3i_ddp_release_gl(struct cxgb3i_gather_list *gl, + struct pci_dev *pdev); + +int cxgb3i_setup_conn_host_pagesize(struct t3cdev *, unsigned int tid, + int reply); +int cxgb3i_setup_conn_pagesize(struct t3cdev *, unsigned int tid, int reply, + unsigned long pgsz); +int cxgb3i_setup_conn_digest(struct t3cdev *, unsigned int tid, + int hcrc, int dcrc, int reply); +int cxgb3i_ddp_find_page_index(unsigned long pgsz); +int cxgb3i_adapter_ddp_init(struct t3cdev *, struct cxgb3i_tag_format *, + unsigned int *txsz, unsigned int *rxsz); +void cxgb3i_adapter_ddp_cleanup(struct t3cdev *); +#endif diff --git a/drivers/scsi/cxgb3i/cxgb3i_init.c b/drivers/scsi/cxgb3i/cxgb3i_init.c new file mode 100644 index 000000000000..091ecb4d9f3d --- /dev/null +++ b/drivers/scsi/cxgb3i/cxgb3i_init.c @@ -0,0 +1,107 @@ +/* cxgb3i_init.c: Chelsio S3xx iSCSI driver. + * + * Copyright (c) 2008 Chelsio Communications, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Karen Xie (kxie@chelsio.com) + */ + +#include "cxgb3i.h" + +#define DRV_MODULE_NAME "cxgb3i" +#define DRV_MODULE_VERSION "1.0.0" +#define DRV_MODULE_RELDATE "Jun. 1, 2008" + +static char version[] = + "Chelsio S3xx iSCSI Driver " DRV_MODULE_NAME + " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; + +MODULE_AUTHOR("Karen Xie "); +MODULE_DESCRIPTION("Chelsio S3xx iSCSI Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); + +static void open_s3_dev(struct t3cdev *); +static void close_s3_dev(struct t3cdev *); + +static cxgb3_cpl_handler_func cxgb3i_cpl_handlers[NUM_CPL_CMDS]; +static struct cxgb3_client t3c_client = { + .name = "iscsi_cxgb3", + .handlers = cxgb3i_cpl_handlers, + .add = open_s3_dev, + .remove = close_s3_dev, +}; + +/** + * open_s3_dev - register with cxgb3 LLD + * @t3dev: cxgb3 adapter instance + */ +static void open_s3_dev(struct t3cdev *t3dev) +{ + static int vers_printed; + + if (!vers_printed) { + printk(KERN_INFO "%s", version); + vers_printed = 1; + } + + cxgb3i_sdev_add(t3dev, &t3c_client); + cxgb3i_adapter_add(t3dev); +} + +/** + * close_s3_dev - de-register with cxgb3 LLD + * @t3dev: cxgb3 adapter instance + */ +static void close_s3_dev(struct t3cdev *t3dev) +{ + cxgb3i_adapter_remove(t3dev); + cxgb3i_sdev_remove(t3dev); +} + +/** + * cxgb3i_init_module - module init entry point + * + * initialize any driver wide global data structures and register itself + * with the cxgb3 module + */ +static int __init cxgb3i_init_module(void) +{ + int err; + + err = cxgb3i_sdev_init(cxgb3i_cpl_handlers); + if (err < 0) + return err; + + err = cxgb3i_iscsi_init(); + if (err < 0) + return err; + + err = cxgb3i_pdu_init(); + if (err < 0) + return err; + + cxgb3_register_client(&t3c_client); + + return 0; +} + +/** + * cxgb3i_exit_module - module cleanup/exit entry point + * + * go through the driver hba list and for each hba, release any resource held. + * and unregisters iscsi transport and the cxgb3 module + */ +static void __exit cxgb3i_exit_module(void) +{ + cxgb3_unregister_client(&t3c_client); + cxgb3i_pdu_cleanup(); + cxgb3i_iscsi_cleanup(); + cxgb3i_sdev_cleanup(); +} + +module_init(cxgb3i_init_module); +module_exit(cxgb3i_exit_module); diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c new file mode 100644 index 000000000000..d83464b9b3f9 --- /dev/null +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -0,0 +1,951 @@ +/* cxgb3i_iscsi.c: Chelsio S3xx iSCSI driver. + * + * Copyright (c) 2008 Chelsio Communications, Inc. + * Copyright (c) 2008 Mike Christie + * Copyright (c) 2008 Red Hat, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Karen Xie (kxie@chelsio.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cxgb3i.h" +#include "cxgb3i_pdu.h" + +#ifdef __DEBUG_CXGB3I_TAG__ +#define cxgb3i_tag_debug cxgb3i_log_debug +#else +#define cxgb3i_tag_debug(fmt...) +#endif + +#ifdef __DEBUG_CXGB3I_API__ +#define cxgb3i_api_debug cxgb3i_log_debug +#else +#define cxgb3i_api_debug(fmt...) +#endif + +/* + * align pdu size to multiple of 512 for better performance + */ +#define align_pdu_size(n) do { n = (n) & (~511); } while (0) + +static struct scsi_transport_template *cxgb3i_scsi_transport; +static struct scsi_host_template cxgb3i_host_template; +static struct iscsi_transport cxgb3i_iscsi_transport; +static unsigned char sw_tag_idx_bits; +static unsigned char sw_tag_age_bits; + +static LIST_HEAD(cxgb3i_snic_list); +static DEFINE_RWLOCK(cxgb3i_snic_rwlock); + +/** + * cxgb3i_adapter_add - init a s3 adapter structure and any h/w settings + * @t3dev: t3cdev adapter + * return the resulting cxgb3i_adapter struct + */ +struct cxgb3i_adapter *cxgb3i_adapter_add(struct t3cdev *t3dev) +{ + struct cxgb3i_adapter *snic; + struct adapter *adapter = tdev2adap(t3dev); + int i; + + snic = kzalloc(sizeof(*snic), GFP_KERNEL); + if (!snic) { + cxgb3i_api_debug("cxgb3 %s, OOM.\n", t3dev->name); + return NULL; + } + spin_lock_init(&snic->lock); + + snic->tdev = t3dev; + snic->pdev = adapter->pdev; + snic->tag_format.sw_bits = sw_tag_idx_bits + sw_tag_age_bits; + + if (cxgb3i_adapter_ddp_init(t3dev, &snic->tag_format, + &snic->tx_max_size, + &snic->rx_max_size) < 0) + goto free_snic; + + for_each_port(adapter, i) { + snic->hba[i] = cxgb3i_hba_host_add(snic, adapter->port[i]); + if (!snic->hba[i]) + goto ulp_cleanup; + } + snic->hba_cnt = adapter->params.nports; + + /* add to the list */ + write_lock(&cxgb3i_snic_rwlock); + list_add_tail(&snic->list_head, &cxgb3i_snic_list); + write_unlock(&cxgb3i_snic_rwlock); + + return snic; + +ulp_cleanup: + cxgb3i_adapter_ddp_cleanup(t3dev); +free_snic: + kfree(snic); + return NULL; +} + +/** + * cxgb3i_adapter_remove - release all the resources held and cleanup any + * h/w settings + * @t3dev: t3cdev adapter + */ +void cxgb3i_adapter_remove(struct t3cdev *t3dev) +{ + int i; + struct cxgb3i_adapter *snic; + + /* remove from the list */ + write_lock(&cxgb3i_snic_rwlock); + list_for_each_entry(snic, &cxgb3i_snic_list, list_head) { + if (snic->tdev == t3dev) { + list_del(&snic->list_head); + break; + } + } + write_unlock(&cxgb3i_snic_rwlock); + + if (snic) { + for (i = 0; i < snic->hba_cnt; i++) { + if (snic->hba[i]) { + cxgb3i_hba_host_remove(snic->hba[i]); + snic->hba[i] = NULL; + } + } + + /* release ddp resources */ + cxgb3i_adapter_ddp_cleanup(snic->tdev); + kfree(snic); + } +} + +/** + * cxgb3i_hba_find_by_netdev - find the cxgb3i_hba structure with a given + * net_device + * @t3dev: t3cdev adapter + */ +struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev) +{ + struct cxgb3i_adapter *snic; + int i; + + read_lock(&cxgb3i_snic_rwlock); + list_for_each_entry(snic, &cxgb3i_snic_list, list_head) { + for (i = 0; i < snic->hba_cnt; i++) { + if (snic->hba[i]->ndev == ndev) { + read_unlock(&cxgb3i_snic_rwlock); + return snic->hba[i]; + } + } + } + read_unlock(&cxgb3i_snic_rwlock); + return NULL; +} + +/** + * cxgb3i_hba_host_add - register a new host with scsi/iscsi + * @snic: the cxgb3i adapter + * @ndev: associated net_device + */ +struct cxgb3i_hba *cxgb3i_hba_host_add(struct cxgb3i_adapter *snic, + struct net_device *ndev) +{ + struct cxgb3i_hba *hba; + struct Scsi_Host *shost; + int err; + + shost = iscsi_host_alloc(&cxgb3i_host_template, + sizeof(struct cxgb3i_hba), + CXGB3I_SCSI_QDEPTH_DFLT); + if (!shost) { + cxgb3i_log_info("iscsi_host_alloc failed.\n"); + return NULL; + } + + shost->transportt = cxgb3i_scsi_transport; + shost->max_lun = CXGB3I_MAX_LUN; + shost->max_id = CXGB3I_MAX_TARGET; + shost->max_channel = 0; + shost->max_cmd_len = 16; + + hba = iscsi_host_priv(shost); + hba->snic = snic; + hba->ndev = ndev; + hba->shost = shost; + + pci_dev_get(snic->pdev); + err = iscsi_host_add(shost, &snic->pdev->dev); + if (err) { + cxgb3i_log_info("iscsi_host_add failed.\n"); + goto pci_dev_put; + } + + cxgb3i_api_debug("shost 0x%p, hba 0x%p, no %u.\n", + shost, hba, shost->host_no); + + return hba; + +pci_dev_put: + pci_dev_put(snic->pdev); + scsi_host_put(shost); + return NULL; +} + +/** + * cxgb3i_hba_host_remove - de-register the host with scsi/iscsi + * @hba: the cxgb3i hba + */ +void cxgb3i_hba_host_remove(struct cxgb3i_hba *hba) +{ + cxgb3i_api_debug("shost 0x%p, hba 0x%p, no %u.\n", + hba->shost, hba, hba->shost->host_no); + iscsi_host_remove(hba->shost); + pci_dev_put(hba->snic->pdev); + iscsi_host_free(hba->shost); +} + +/** + * cxgb3i_ep_connect - establish TCP connection to target portal + * @dst_addr: target IP address + * @non_blocking: blocking or non-blocking call + * + * Initiates a TCP/IP connection to the dst_addr + */ +static struct iscsi_endpoint *cxgb3i_ep_connect(struct sockaddr *dst_addr, + int non_blocking) +{ + struct iscsi_endpoint *ep; + struct cxgb3i_endpoint *cep; + struct cxgb3i_hba *hba; + struct s3_conn *c3cn = NULL; + int err = 0; + + c3cn = cxgb3i_c3cn_create(); + if (!c3cn) { + cxgb3i_log_info("ep connect OOM.\n"); + err = -ENOMEM; + goto release_conn; + } + + err = cxgb3i_c3cn_connect(c3cn, (struct sockaddr_in *)dst_addr); + if (err < 0) { + cxgb3i_log_info("ep connect failed.\n"); + goto release_conn; + } + hba = cxgb3i_hba_find_by_netdev(c3cn->dst_cache->dev); + if (!hba) { + err = -ENOSPC; + cxgb3i_log_info("NOT going through cxgbi device.\n"); + goto release_conn; + } + if (c3cn_is_closing(c3cn)) { + err = -ENOSPC; + cxgb3i_log_info("ep connect unable to connect.\n"); + goto release_conn; + } + + ep = iscsi_create_endpoint(sizeof(*cep)); + if (!ep) { + err = -ENOMEM; + cxgb3i_log_info("iscsi alloc ep, OOM.\n"); + goto release_conn; + } + cep = ep->dd_data; + cep->c3cn = c3cn; + cep->hba = hba; + + cxgb3i_api_debug("ep 0x%p, 0x%p, c3cn 0x%p, hba 0x%p.\n", + ep, cep, c3cn, hba); + return ep; + +release_conn: + cxgb3i_api_debug("conn 0x%p failed, release.\n", c3cn); + if (c3cn) + cxgb3i_c3cn_release(c3cn); + return ERR_PTR(err); +} + +/** + * cxgb3i_ep_poll - polls for TCP connection establishement + * @ep: TCP connection (endpoint) handle + * @timeout_ms: timeout value in milli secs + * + * polls for TCP connect request to complete + */ +static int cxgb3i_ep_poll(struct iscsi_endpoint *ep, int timeout_ms) +{ + struct cxgb3i_endpoint *cep = ep->dd_data; + struct s3_conn *c3cn = cep->c3cn; + + if (!c3cn_is_established(c3cn)) + return 0; + cxgb3i_api_debug("ep 0x%p, c3cn 0x%p established.\n", ep, c3cn); + return 1; +} + +/** + * cxgb3i_ep_disconnect - teardown TCP connection + * @ep: TCP connection (endpoint) handle + * + * teardown TCP connection + */ +static void cxgb3i_ep_disconnect(struct iscsi_endpoint *ep) +{ + struct cxgb3i_endpoint *cep = ep->dd_data; + struct cxgb3i_conn *cconn = cep->cconn; + + cxgb3i_api_debug("ep 0x%p, cep 0x%p.\n", ep, cep); + + if (cconn && cconn->conn) { + /* + * stop the xmit path so the xmit_pdu function is + * not being called + */ + iscsi_suspend_tx(cconn->conn); + + write_lock_bh(&cep->c3cn->callback_lock); + cep->c3cn->user_data = NULL; + cconn->cep = NULL; + write_unlock_bh(&cep->c3cn->callback_lock); + } + + cxgb3i_api_debug("ep 0x%p, cep 0x%p, release c3cn 0x%p.\n", + ep, cep, cep->c3cn); + cxgb3i_c3cn_release(cep->c3cn); + iscsi_destroy_endpoint(ep); +} + +/** + * cxgb3i_session_create - create a new iscsi session + * @cmds_max: max # of commands + * @qdepth: scsi queue depth + * @initial_cmdsn: initial iscsi CMDSN for this session + * @host_no: pointer to return host no + * + * Creates a new iSCSI session + */ +static struct iscsi_cls_session * +cxgb3i_session_create(struct iscsi_endpoint *ep, u16 cmds_max, u16 qdepth, + u32 initial_cmdsn, u32 *host_no) +{ + struct cxgb3i_endpoint *cep; + struct cxgb3i_hba *hba; + struct Scsi_Host *shost; + struct iscsi_cls_session *cls_session; + struct iscsi_session *session; + + if (!ep) { + cxgb3i_log_error("%s, missing endpoint.\n", __func__); + return NULL; + } + + cep = ep->dd_data; + hba = cep->hba; + shost = hba->shost; + cxgb3i_api_debug("ep 0x%p, cep 0x%p, hba 0x%p.\n", ep, cep, hba); + BUG_ON(hba != iscsi_host_priv(shost)); + + *host_no = shost->host_no; + + cls_session = iscsi_session_setup(&cxgb3i_iscsi_transport, shost, + cmds_max, + sizeof(struct iscsi_tcp_task), + initial_cmdsn, ISCSI_MAX_TARGET); + if (!cls_session) + return NULL; + session = cls_session->dd_data; + if (iscsi_tcp_r2tpool_alloc(session)) + goto remove_session; + + return cls_session; + +remove_session: + iscsi_session_teardown(cls_session); + return NULL; +} + +/** + * cxgb3i_session_destroy - destroys iscsi session + * @cls_session: pointer to iscsi cls session + * + * Destroys an iSCSI session instance and releases its all resources held + */ +static void cxgb3i_session_destroy(struct iscsi_cls_session *cls_session) +{ + cxgb3i_api_debug("sess 0x%p.\n", cls_session); + iscsi_tcp_r2tpool_free(cls_session->dd_data); + iscsi_session_teardown(cls_session); +} + +/** + * cxgb3i_conn_max_xmit_dlength -- check the max. xmit pdu segment size, + * reduce it to be within the hardware limit if needed + * @conn: iscsi connection + */ +static inline int cxgb3i_conn_max_xmit_dlength(struct iscsi_conn *conn) + +{ + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + struct cxgb3i_conn *cconn = tcp_conn->dd_data; + unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD, + cconn->hba->snic->tx_max_size - + ISCSI_PDU_NONPAYLOAD_MAX); + + if (conn->max_xmit_dlength) + conn->max_xmit_dlength = min_t(unsigned int, + conn->max_xmit_dlength, max); + else + conn->max_xmit_dlength = max; + align_pdu_size(conn->max_xmit_dlength); + cxgb3i_log_info("conn 0x%p, max xmit %u.\n", + conn, conn->max_xmit_dlength); + return 0; +} + +/** + * cxgb3i_conn_max_recv_dlength -- check the max. recv pdu segment size against + * the hardware limit + * @conn: iscsi connection + * return 0 if the value is valid, < 0 otherwise. + */ +static inline int cxgb3i_conn_max_recv_dlength(struct iscsi_conn *conn) +{ + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + struct cxgb3i_conn *cconn = tcp_conn->dd_data; + unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD, + cconn->hba->snic->rx_max_size - + ISCSI_PDU_NONPAYLOAD_MAX); + + align_pdu_size(max); + if (conn->max_recv_dlength) { + if (conn->max_recv_dlength > max) { + cxgb3i_log_error("MaxRecvDataSegmentLength %u too big." + " Need to be <= %u.\n", + conn->max_recv_dlength, max); + return -EINVAL; + } + conn->max_recv_dlength = min_t(unsigned int, + conn->max_recv_dlength, max); + align_pdu_size(conn->max_recv_dlength); + } else + conn->max_recv_dlength = max; + cxgb3i_api_debug("conn 0x%p, max recv %u.\n", + conn, conn->max_recv_dlength); + return 0; +} + +/** + * cxgb3i_conn_create - create iscsi connection instance + * @cls_session: pointer to iscsi cls session + * @cid: iscsi cid + * + * Creates a new iSCSI connection instance for a given session + */ +static struct iscsi_cls_conn *cxgb3i_conn_create(struct iscsi_cls_session + *cls_session, u32 cid) +{ + struct iscsi_cls_conn *cls_conn; + struct iscsi_conn *conn; + struct iscsi_tcp_conn *tcp_conn; + struct cxgb3i_conn *cconn; + + cxgb3i_api_debug("sess 0x%p, cid %u.\n", cls_session, cid); + + cls_conn = iscsi_tcp_conn_setup(cls_session, sizeof(*cconn), cid); + if (!cls_conn) + return NULL; + conn = cls_conn->dd_data; + tcp_conn = conn->dd_data; + cconn = tcp_conn->dd_data; + + cconn->conn = conn; + return cls_conn; +} + +/** + * cxgb3i_conn_bind - binds iscsi sess, conn and endpoint together + * @cls_session: pointer to iscsi cls session + * @cls_conn: pointer to iscsi cls conn + * @transport_eph: 64-bit EP handle + * @is_leading: leading connection on this session? + * + * Binds together an iSCSI session, an iSCSI connection and a + * TCP connection. This routine returns error code if the TCP + * connection does not belong on the device iSCSI sess/conn is bound + */ + +static int cxgb3i_conn_bind(struct iscsi_cls_session *cls_session, + struct iscsi_cls_conn *cls_conn, + u64 transport_eph, int is_leading) +{ + struct iscsi_conn *conn = cls_conn->dd_data; + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + struct cxgb3i_conn *cconn = tcp_conn->dd_data; + struct cxgb3i_adapter *snic; + struct iscsi_endpoint *ep; + struct cxgb3i_endpoint *cep; + struct s3_conn *c3cn; + int err; + + ep = iscsi_lookup_endpoint(transport_eph); + if (!ep) + return -EINVAL; + + /* setup ddp pagesize */ + cep = ep->dd_data; + c3cn = cep->c3cn; + snic = cep->hba->snic; + err = cxgb3i_setup_conn_host_pagesize(snic->tdev, c3cn->tid, 0); + if (err < 0) + return err; + + cxgb3i_api_debug("ep 0x%p, cls sess 0x%p, cls conn 0x%p.\n", + ep, cls_session, cls_conn); + + err = iscsi_conn_bind(cls_session, cls_conn, is_leading); + if (err) + return -EINVAL; + + /* calculate the tag idx bits needed for this conn based on cmds_max */ + cconn->task_idx_bits = (__ilog2_u32(conn->session->cmds_max - 1)) + 1; + cxgb3i_api_debug("session cmds_max 0x%x, bits %u.\n", + conn->session->cmds_max, cconn->task_idx_bits); + + read_lock(&c3cn->callback_lock); + c3cn->user_data = conn; + cconn->hba = cep->hba; + cconn->cep = cep; + cep->cconn = cconn; + read_unlock(&c3cn->callback_lock); + + cxgb3i_conn_max_xmit_dlength(conn); + cxgb3i_conn_max_recv_dlength(conn); + + spin_lock_bh(&conn->session->lock); + sprintf(conn->portal_address, NIPQUAD_FMT, + NIPQUAD(c3cn->daddr.sin_addr.s_addr)); + conn->portal_port = ntohs(c3cn->daddr.sin_port); + spin_unlock_bh(&conn->session->lock); + + /* init recv engine */ + iscsi_tcp_hdr_recv_prep(tcp_conn); + + return 0; +} + +/** + * cxgb3i_conn_get_param - return iscsi connection parameter to caller + * @cls_conn: pointer to iscsi cls conn + * @param: parameter type identifier + * @buf: buffer pointer + * + * returns iSCSI connection parameters + */ +static int cxgb3i_conn_get_param(struct iscsi_cls_conn *cls_conn, + enum iscsi_param param, char *buf) +{ + struct iscsi_conn *conn = cls_conn->dd_data; + int len; + + cxgb3i_api_debug("cls_conn 0x%p, param %d.\n", cls_conn, param); + + switch (param) { + case ISCSI_PARAM_CONN_PORT: + spin_lock_bh(&conn->session->lock); + len = sprintf(buf, "%hu\n", conn->portal_port); + spin_unlock_bh(&conn->session->lock); + break; + case ISCSI_PARAM_CONN_ADDRESS: + spin_lock_bh(&conn->session->lock); + len = sprintf(buf, "%s\n", conn->portal_address); + spin_unlock_bh(&conn->session->lock); + break; + default: + return iscsi_conn_get_param(cls_conn, param, buf); + } + + return len; +} + +/** + * cxgb3i_conn_set_param - set iscsi connection parameter + * @cls_conn: pointer to iscsi cls conn + * @param: parameter type identifier + * @buf: buffer pointer + * @buflen: buffer length + * + * set iSCSI connection parameters + */ +static int cxgb3i_conn_set_param(struct iscsi_cls_conn *cls_conn, + enum iscsi_param param, char *buf, int buflen) +{ + struct iscsi_conn *conn = cls_conn->dd_data; + struct iscsi_session *session = conn->session; + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + struct cxgb3i_conn *cconn = tcp_conn->dd_data; + struct cxgb3i_adapter *snic = cconn->hba->snic; + struct s3_conn *c3cn = cconn->cep->c3cn; + int value, err = 0; + + switch (param) { + case ISCSI_PARAM_HDRDGST_EN: + err = iscsi_set_param(cls_conn, param, buf, buflen); + if (!err && conn->hdrdgst_en) + err = cxgb3i_setup_conn_digest(snic->tdev, c3cn->tid, + conn->hdrdgst_en, + conn->datadgst_en, 0); + break; + case ISCSI_PARAM_DATADGST_EN: + err = iscsi_set_param(cls_conn, param, buf, buflen); + if (!err && conn->datadgst_en) + err = cxgb3i_setup_conn_digest(snic->tdev, c3cn->tid, + conn->hdrdgst_en, + conn->datadgst_en, 0); + break; + case ISCSI_PARAM_MAX_R2T: + sscanf(buf, "%d", &value); + if (value <= 0 || !is_power_of_2(value)) + return -EINVAL; + if (session->max_r2t == value) + break; + iscsi_tcp_r2tpool_free(session); + err = iscsi_set_param(cls_conn, param, buf, buflen); + if (!err && iscsi_tcp_r2tpool_alloc(session)) + return -ENOMEM; + case ISCSI_PARAM_MAX_RECV_DLENGTH: + err = iscsi_set_param(cls_conn, param, buf, buflen); + if (!err) + err = cxgb3i_conn_max_recv_dlength(conn); + break; + case ISCSI_PARAM_MAX_XMIT_DLENGTH: + err = iscsi_set_param(cls_conn, param, buf, buflen); + if (!err) + err = cxgb3i_conn_max_xmit_dlength(conn); + break; + default: + return iscsi_set_param(cls_conn, param, buf, buflen); + } + return err; +} + +/** + * cxgb3i_host_set_param - configure host (adapter) related parameters + * @shost: scsi host pointer + * @param: parameter type identifier + * @buf: buffer pointer + */ +static int cxgb3i_host_set_param(struct Scsi_Host *shost, + enum iscsi_host_param param, + char *buf, int buflen) +{ + struct cxgb3i_hba *hba = iscsi_host_priv(shost); + + cxgb3i_api_debug("param %d, buf %s.\n", param, buf); + + switch (param) { + case ISCSI_HOST_PARAM_IPADDRESS: + { + __be32 addr = in_aton(buf); + cxgb3i_set_private_ipv4addr(hba->ndev, addr); + return 0; + } + case ISCSI_HOST_PARAM_HWADDRESS: + case ISCSI_HOST_PARAM_NETDEV_NAME: + /* ignore */ + return 0; + default: + return iscsi_host_set_param(shost, param, buf, buflen); + } +} + +/** + * cxgb3i_host_get_param - returns host (adapter) related parameters + * @shost: scsi host pointer + * @param: parameter type identifier + * @buf: buffer pointer + */ +static int cxgb3i_host_get_param(struct Scsi_Host *shost, + enum iscsi_host_param param, char *buf) +{ + struct cxgb3i_hba *hba = iscsi_host_priv(shost); + int len = 0; + + cxgb3i_api_debug("hba %s, param %d.\n", hba->ndev->name, param); + + switch (param) { + case ISCSI_HOST_PARAM_HWADDRESS: + len = sysfs_format_mac(buf, hba->ndev->dev_addr, 6); + break; + case ISCSI_HOST_PARAM_NETDEV_NAME: + len = sprintf(buf, "%s\n", hba->ndev->name); + break; + case ISCSI_HOST_PARAM_IPADDRESS: + { + __be32 addr; + + addr = cxgb3i_get_private_ipv4addr(hba->ndev); + len = sprintf(buf, NIPQUAD_FMT, NIPQUAD(addr)); + break; + } + default: + return iscsi_host_get_param(shost, param, buf); + } + return len; +} + +/** + * cxgb3i_conn_get_stats - returns iSCSI stats + * @cls_conn: pointer to iscsi cls conn + * @stats: pointer to iscsi statistic struct + */ +static void cxgb3i_conn_get_stats(struct iscsi_cls_conn *cls_conn, + struct iscsi_stats *stats) +{ + struct iscsi_conn *conn = cls_conn->dd_data; + + stats->txdata_octets = conn->txdata_octets; + stats->rxdata_octets = conn->rxdata_octets; + stats->scsicmd_pdus = conn->scsicmd_pdus_cnt; + stats->dataout_pdus = conn->dataout_pdus_cnt; + stats->scsirsp_pdus = conn->scsirsp_pdus_cnt; + stats->datain_pdus = conn->datain_pdus_cnt; + stats->r2t_pdus = conn->r2t_pdus_cnt; + stats->tmfcmd_pdus = conn->tmfcmd_pdus_cnt; + stats->tmfrsp_pdus = conn->tmfrsp_pdus_cnt; + stats->digest_err = 0; + stats->timeout_err = 0; + stats->custom_length = 1; + strcpy(stats->custom[0].desc, "eh_abort_cnt"); + stats->custom[0].value = conn->eh_abort_cnt; +} + +/** + * cxgb3i_parse_itt - get the idx and age bits from a given tag + * @conn: iscsi connection + * @itt: itt tag + * @idx: task index, filled in by this function + * @age: session age, filled in by this function + */ +static void cxgb3i_parse_itt(struct iscsi_conn *conn, itt_t itt, + int *idx, int *age) +{ + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + struct cxgb3i_conn *cconn = tcp_conn->dd_data; + struct cxgb3i_adapter *snic = cconn->hba->snic; + u32 tag = ntohl((__force u32) itt); + u32 sw_bits; + + sw_bits = cxgb3i_tag_nonrsvd_bits(&snic->tag_format, tag); + if (idx) + *idx = sw_bits & ((1 << cconn->task_idx_bits) - 1); + if (age) + *age = (sw_bits >> cconn->task_idx_bits) & ISCSI_AGE_MASK; + + cxgb3i_tag_debug("parse tag 0x%x/0x%x, sw 0x%x, itt 0x%x, age 0x%x.\n", + tag, itt, sw_bits, idx ? *idx : 0xFFFFF, + age ? *age : 0xFF); +} + +/** + * cxgb3i_reserve_itt - generate tag for a give task + * Try to set up ddp for a scsi read task. + * @task: iscsi task + * @hdr_itt: tag, filled in by this function + */ +int cxgb3i_reserve_itt(struct iscsi_task *task, itt_t *hdr_itt) +{ + struct scsi_cmnd *sc = task->sc; + struct iscsi_conn *conn = task->conn; + struct iscsi_session *sess = conn->session; + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + struct cxgb3i_conn *cconn = tcp_conn->dd_data; + struct cxgb3i_adapter *snic = cconn->hba->snic; + struct cxgb3i_tag_format *tformat = &snic->tag_format; + u32 sw_tag = (sess->age << cconn->task_idx_bits) | task->itt; + u32 tag; + int err = -EINVAL; + + if (sc && + (scsi_bidi_cmnd(sc) || sc->sc_data_direction == DMA_FROM_DEVICE) && + cxgb3i_sw_tag_usable(tformat, sw_tag)) { + struct s3_conn *c3cn = cconn->cep->c3cn; + struct cxgb3i_gather_list *gl; + + gl = cxgb3i_ddp_make_gl(scsi_in(sc)->length, + scsi_in(sc)->table.sgl, + scsi_in(sc)->table.nents, + snic->pdev, + GFP_ATOMIC); + if (gl) { + tag = sw_tag; + err = cxgb3i_ddp_tag_reserve(snic->tdev, c3cn->tid, + tformat, &tag, + gl, GFP_ATOMIC); + if (err < 0) + cxgb3i_ddp_release_gl(gl, snic->pdev); + } + } + + if (err < 0) + tag = cxgb3i_set_non_ddp_tag(tformat, sw_tag); + /* the itt need to sent in big-endian order */ + *hdr_itt = (__force itt_t)htonl(tag); + + cxgb3i_tag_debug("new tag 0x%x/0x%x (itt 0x%x, age 0x%x).\n", + tag, *hdr_itt, task->itt, sess->age); + return 0; +} + +/** + * cxgb3i_release_itt - release the tag for a given task + * if the tag is a ddp tag, release the ddp setup + * @task: iscsi task + * @hdr_itt: tag + */ +void cxgb3i_release_itt(struct iscsi_task *task, itt_t hdr_itt) +{ + struct scsi_cmnd *sc = task->sc; + struct iscsi_tcp_conn *tcp_conn = task->conn->dd_data; + struct cxgb3i_conn *cconn = tcp_conn->dd_data; + struct cxgb3i_adapter *snic = cconn->hba->snic; + struct cxgb3i_tag_format *tformat = &snic->tag_format; + u32 tag = ntohl((__force u32)hdr_itt); + + cxgb3i_tag_debug("release tag 0x%x.\n", tag); + + if (sc && + (scsi_bidi_cmnd(sc) || sc->sc_data_direction == DMA_FROM_DEVICE) && + cxgb3i_is_ddp_tag(tformat, tag)) + cxgb3i_ddp_tag_release(snic->tdev, tag); +} + +/** + * cxgb3i_host_template -- Scsi_Host_Template structure + * used when registering with the scsi mid layer + */ +static struct scsi_host_template cxgb3i_host_template = { + .module = THIS_MODULE, + .name = "Chelsio S3xx iSCSI Initiator", + .proc_name = "cxgb3i", + .queuecommand = iscsi_queuecommand, + .change_queue_depth = iscsi_change_queue_depth, + .can_queue = 128 * (ISCSI_DEF_XMIT_CMDS_MAX - 1), + .sg_tablesize = SG_ALL, + .max_sectors = 0xFFFF, + .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, + .eh_abort_handler = iscsi_eh_abort, + .eh_device_reset_handler = iscsi_eh_device_reset, + .eh_target_reset_handler = iscsi_eh_target_reset, + .use_clustering = DISABLE_CLUSTERING, + .this_id = -1, +}; + +static struct iscsi_transport cxgb3i_iscsi_transport = { + .owner = THIS_MODULE, + .name = "cxgb3i", + .caps = CAP_RECOVERY_L0 | CAP_MULTI_R2T | CAP_HDRDGST + | CAP_DATADGST | CAP_DIGEST_OFFLOAD | + CAP_PADDING_OFFLOAD, + .param_mask = ISCSI_MAX_RECV_DLENGTH | + ISCSI_MAX_XMIT_DLENGTH | + ISCSI_HDRDGST_EN | + ISCSI_DATADGST_EN | + ISCSI_INITIAL_R2T_EN | + ISCSI_MAX_R2T | + ISCSI_IMM_DATA_EN | + ISCSI_FIRST_BURST | + ISCSI_MAX_BURST | + ISCSI_PDU_INORDER_EN | + ISCSI_DATASEQ_INORDER_EN | + ISCSI_ERL | + ISCSI_CONN_PORT | + ISCSI_CONN_ADDRESS | + ISCSI_EXP_STATSN | + ISCSI_PERSISTENT_PORT | + ISCSI_PERSISTENT_ADDRESS | + ISCSI_TARGET_NAME | ISCSI_TPGT | + ISCSI_USERNAME | ISCSI_PASSWORD | + ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN | + ISCSI_FAST_ABORT | ISCSI_ABORT_TMO | + ISCSI_LU_RESET_TMO | + ISCSI_PING_TMO | ISCSI_RECV_TMO | + ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME, + .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS | + ISCSI_HOST_INITIATOR_NAME | ISCSI_HOST_NETDEV_NAME, + .get_host_param = cxgb3i_host_get_param, + .set_host_param = cxgb3i_host_set_param, + /* session management */ + .create_session = cxgb3i_session_create, + .destroy_session = cxgb3i_session_destroy, + .get_session_param = iscsi_session_get_param, + /* connection management */ + .create_conn = cxgb3i_conn_create, + .bind_conn = cxgb3i_conn_bind, + .destroy_conn = iscsi_tcp_conn_teardown, + .start_conn = iscsi_conn_start, + .stop_conn = iscsi_conn_stop, + .get_conn_param = cxgb3i_conn_get_param, + .set_param = cxgb3i_conn_set_param, + .get_stats = cxgb3i_conn_get_stats, + /* pdu xmit req. from user space */ + .send_pdu = iscsi_conn_send_pdu, + /* task */ + .init_task = iscsi_tcp_task_init, + .xmit_task = iscsi_tcp_task_xmit, + .cleanup_task = cxgb3i_conn_cleanup_task, + + /* pdu */ + .alloc_pdu = cxgb3i_conn_alloc_pdu, + .init_pdu = cxgb3i_conn_init_pdu, + .xmit_pdu = cxgb3i_conn_xmit_pdu, + .parse_pdu_itt = cxgb3i_parse_itt, + + /* TCP connect/disconnect */ + .ep_connect = cxgb3i_ep_connect, + .ep_poll = cxgb3i_ep_poll, + .ep_disconnect = cxgb3i_ep_disconnect, + /* Error recovery timeout call */ + .session_recovery_timedout = iscsi_session_recovery_timedout, +}; + +int cxgb3i_iscsi_init(void) +{ + sw_tag_idx_bits = (__ilog2_u32(ISCSI_ITT_MASK)) + 1; + sw_tag_age_bits = (__ilog2_u32(ISCSI_AGE_MASK)) + 1; + cxgb3i_log_info("tag itt 0x%x, %u bits, age 0x%x, %u bits.\n", + ISCSI_ITT_MASK, sw_tag_idx_bits, + ISCSI_AGE_MASK, sw_tag_age_bits); + + cxgb3i_scsi_transport = + iscsi_register_transport(&cxgb3i_iscsi_transport); + if (!cxgb3i_scsi_transport) { + cxgb3i_log_error("Could not register cxgb3i transport.\n"); + return -ENODEV; + } + cxgb3i_api_debug("cxgb3i transport 0x%p.\n", cxgb3i_scsi_transport); + return 0; +} + +void cxgb3i_iscsi_cleanup(void) +{ + if (cxgb3i_scsi_transport) { + cxgb3i_api_debug("cxgb3i transport 0x%p.\n", + cxgb3i_scsi_transport); + iscsi_unregister_transport(&cxgb3i_iscsi_transport); + } +} diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c new file mode 100644 index 000000000000..5f16081b68d5 --- /dev/null +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -0,0 +1,1810 @@ +/* + * cxgb3i_offload.c: Chelsio S3xx iscsi offloaded tcp connection management + * + * Copyright (C) 2003-2008 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + * + * Written by: Dimitris Michailidis (dm@chelsio.com) + * Karen Xie (kxie@chelsio.com) + */ + +#include +#include + +#include "cxgb3_defs.h" +#include "cxgb3_ctl_defs.h" +#include "firmware_exports.h" +#include "cxgb3i_offload.h" +#include "cxgb3i_pdu.h" +#include "cxgb3i_ddp.h" + +#ifdef __DEBUG_C3CN_CONN__ +#define c3cn_conn_debug cxgb3i_log_info +#else +#define c3cn_conn_debug(fmt...) +#endif + +#ifdef __DEBUG_C3CN_TX__ +#define c3cn_tx_debug cxgb3i_log_debug +#else +#define c3cn_tx_debug(fmt...) +#endif + +#ifdef __DEBUG_C3CN_RX__ +#define c3cn_rx_debug cxgb3i_log_debug +#else +#define c3cn_rx_debug(fmt...) +#endif + +/* + * module parameters releated to offloaded iscsi connection + */ +static int cxgb3_rcv_win = 256 * 1024; +module_param(cxgb3_rcv_win, int, 0644); +MODULE_PARM_DESC(cxgb3_rcv_win, "TCP receive window in bytes (default=256KB)"); + +static int cxgb3_snd_win = 64 * 1024; +module_param(cxgb3_snd_win, int, 0644); +MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=64KB)"); + +static int cxgb3_rx_credit_thres = 10 * 1024; +module_param(cxgb3_rx_credit_thres, int, 0644); +MODULE_PARM_DESC(rx_credit_thres, + "RX credits return threshold in bytes (default=10KB)"); + +static unsigned int cxgb3_max_connect = 8 * 1024; +module_param(cxgb3_max_connect, uint, 0644); +MODULE_PARM_DESC(cxgb3_max_connect, "Max. # of connections (default=8092)"); + +static unsigned int cxgb3_sport_base = 20000; +module_param(cxgb3_sport_base, uint, 0644); +MODULE_PARM_DESC(cxgb3_sport_base, "starting port number (default=20000)"); + +/* + * cxgb3i tcp connection data(per adapter) list + */ +static LIST_HEAD(cdata_list); +static DEFINE_RWLOCK(cdata_rwlock); + +static int c3cn_push_tx_frames(struct s3_conn *c3cn, int req_completion); +static void c3cn_release_offload_resources(struct s3_conn *c3cn); + +/* + * iscsi source port management + * + * Find a free source port in the port allocation map. We use a very simple + * rotor scheme to look for the next free port. + * + * If a source port has been specified make sure that it doesn't collide with + * our normal source port allocation map. If it's outside the range of our + * allocation/deallocation scheme just let them use it. + * + * If the source port is outside our allocation range, the caller is + * responsible for keeping track of their port usage. + */ +static int c3cn_get_port(struct s3_conn *c3cn, struct cxgb3i_sdev_data *cdata) +{ + unsigned int start; + int idx; + + if (!cdata) + goto error_out; + + if (c3cn->saddr.sin_port != 0) { + idx = ntohs(c3cn->saddr.sin_port) - cxgb3_sport_base; + if (idx < 0 || idx >= cxgb3_max_connect) + return 0; + if (!test_and_set_bit(idx, cdata->sport_map)) + return -EADDRINUSE; + } + + /* the sport_map_next may not be accurate but that is okay, sport_map + should be */ + start = idx = cdata->sport_map_next; + do { + if (++idx >= cxgb3_max_connect) + idx = 0; + if (!(test_and_set_bit(idx, cdata->sport_map))) { + c3cn->saddr.sin_port = htons(cxgb3_sport_base + idx); + cdata->sport_map_next = idx; + c3cn_conn_debug("%s reserve port %u.\n", + cdata->cdev->name, + cxgb3_sport_base + idx); + return 0; + } + } while (idx != start); + +error_out: + return -EADDRNOTAVAIL; +} + +static void c3cn_put_port(struct s3_conn *c3cn) +{ + struct cxgb3i_sdev_data *cdata = CXGB3_SDEV_DATA(c3cn->cdev); + + if (c3cn->saddr.sin_port) { + int idx = ntohs(c3cn->saddr.sin_port) - cxgb3_sport_base; + + c3cn->saddr.sin_port = 0; + if (idx < 0 || idx >= cxgb3_max_connect) + return; + clear_bit(idx, cdata->sport_map); + c3cn_conn_debug("%s, release port %u.\n", + cdata->cdev->name, cxgb3_sport_base + idx); + } +} + +static inline void c3cn_set_flag(struct s3_conn *c3cn, enum c3cn_flags flag) +{ + __set_bit(flag, &c3cn->flags); + c3cn_conn_debug("c3cn 0x%p, set %d, s %u, f 0x%lx.\n", + c3cn, flag, c3cn->state, c3cn->flags); +} + +static inline void c3cn_clear_flag(struct s3_conn *c3cn, enum c3cn_flags flag) +{ + __clear_bit(flag, &c3cn->flags); + c3cn_conn_debug("c3cn 0x%p, clear %d, s %u, f 0x%lx.\n", + c3cn, flag, c3cn->state, c3cn->flags); +} + +static inline int c3cn_flag(struct s3_conn *c3cn, enum c3cn_flags flag) +{ + if (c3cn == NULL) + return 0; + return test_bit(flag, &c3cn->flags); +} + +static void c3cn_set_state(struct s3_conn *c3cn, int state) +{ + c3cn_conn_debug("c3cn 0x%p state -> %u.\n", c3cn, state); + c3cn->state = state; +} + +static inline void c3cn_hold(struct s3_conn *c3cn) +{ + atomic_inc(&c3cn->refcnt); +} + +static inline void c3cn_put(struct s3_conn *c3cn) +{ + if (atomic_dec_and_test(&c3cn->refcnt)) { + c3cn_conn_debug("free c3cn 0x%p, s %u, f 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + kfree(c3cn); + } +} + +static void c3cn_closed(struct s3_conn *c3cn) +{ + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + c3cn_put_port(c3cn); + c3cn_release_offload_resources(c3cn); + c3cn_set_state(c3cn, C3CN_STATE_CLOSED); + cxgb3i_conn_closing(c3cn); +} + +/* + * CPL (Chelsio Protocol Language) defines a message passing interface between + * the host driver and T3 asic. + * The section below implments CPLs that related to iscsi tcp connection + * open/close/abort and data send/receive. + */ + +/* + * CPL connection active open request: host -> + */ +static unsigned int find_best_mtu(const struct t3c_data *d, unsigned short mtu) +{ + int i = 0; + + while (i < d->nmtus - 1 && d->mtus[i + 1] <= mtu) + ++i; + return i; +} + +static unsigned int select_mss(struct s3_conn *c3cn, unsigned int pmtu) +{ + unsigned int idx; + struct dst_entry *dst = c3cn->dst_cache; + struct t3cdev *cdev = c3cn->cdev; + const struct t3c_data *td = T3C_DATA(cdev); + u16 advmss = dst_metric(dst, RTAX_ADVMSS); + + if (advmss > pmtu - 40) + advmss = pmtu - 40; + if (advmss < td->mtus[0] - 40) + advmss = td->mtus[0] - 40; + idx = find_best_mtu(td, advmss + 40); + return idx; +} + +static inline int compute_wscale(int win) +{ + int wscale = 0; + while (wscale < 14 && (65535<mss_idx); +} + +static inline unsigned int calc_opt0l(struct s3_conn *c3cn) +{ + return V_ULP_MODE(ULP_MODE_ISCSI) | + V_RCV_BUFSIZ(cxgb3_rcv_win>>10); +} + +static void make_act_open_req(struct s3_conn *c3cn, struct sk_buff *skb, + unsigned int atid, const struct l2t_entry *e) +{ + struct cpl_act_open_req *req; + + c3cn_conn_debug("c3cn 0x%p, atid 0x%x.\n", c3cn, atid); + + skb->priority = CPL_PRIORITY_SETUP; + req = (struct cpl_act_open_req *)__skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ACT_OPEN_REQ, atid)); + req->local_port = c3cn->saddr.sin_port; + req->peer_port = c3cn->daddr.sin_port; + req->local_ip = c3cn->saddr.sin_addr.s_addr; + req->peer_ip = c3cn->daddr.sin_addr.s_addr; + req->opt0h = htonl(calc_opt0h(c3cn) | V_L2T_IDX(e->idx) | + V_TX_CHANNEL(e->smt_idx)); + req->opt0l = htonl(calc_opt0l(c3cn)); + req->params = 0; +} + +static void fail_act_open(struct s3_conn *c3cn, int errno) +{ + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + c3cn->err = errno; + c3cn_closed(c3cn); +} + +static void act_open_req_arp_failure(struct t3cdev *dev, struct sk_buff *skb) +{ + struct s3_conn *c3cn = (struct s3_conn *)skb->sk; + + c3cn_conn_debug("c3cn 0x%p, state %u.\n", c3cn, c3cn->state); + + c3cn_hold(c3cn); + spin_lock_bh(&c3cn->lock); + if (c3cn->state == C3CN_STATE_CONNECTING) + fail_act_open(c3cn, EHOSTUNREACH); + spin_unlock_bh(&c3cn->lock); + c3cn_put(c3cn); + __kfree_skb(skb); +} + +/* + * CPL connection close request: host -> + * + * Close a connection by sending a CPL_CLOSE_CON_REQ message and queue it to + * the write queue (i.e., after any unsent txt data). + */ +static void skb_entail(struct s3_conn *c3cn, struct sk_buff *skb, + int flags) +{ + CXGB3_SKB_CB(skb)->seq = c3cn->write_seq; + CXGB3_SKB_CB(skb)->flags = flags; + __skb_queue_tail(&c3cn->write_queue, skb); +} + +static void send_close_req(struct s3_conn *c3cn) +{ + struct sk_buff *skb = c3cn->cpl_close; + struct cpl_close_con_req *req = (struct cpl_close_con_req *)skb->head; + unsigned int tid = c3cn->tid; + + c3cn_conn_debug("c3cn 0x%p, state 0x%x, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + c3cn->cpl_close = NULL; + + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_CLOSE_CON)); + req->wr.wr_lo = htonl(V_WR_TID(tid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_CON_REQ, tid)); + req->rsvd = htonl(c3cn->write_seq); + + skb_entail(c3cn, skb, C3CB_FLAG_NO_APPEND); + if (c3cn->state != C3CN_STATE_CONNECTING) + c3cn_push_tx_frames(c3cn, 1); +} + +/* + * CPL connection abort request: host -> + * + * Send an ABORT_REQ message. Makes sure we do not send multiple ABORT_REQs + * for the same connection and also that we do not try to send a message + * after the connection has closed. + */ +static void abort_arp_failure(struct t3cdev *cdev, struct sk_buff *skb) +{ + struct cpl_abort_req *req = cplhdr(skb); + + c3cn_conn_debug("tdev 0x%p.\n", cdev); + + req->cmd = CPL_ABORT_NO_RST; + cxgb3_ofld_send(cdev, skb); +} + +static inline void c3cn_purge_write_queue(struct s3_conn *c3cn) +{ + struct sk_buff *skb; + + while ((skb = __skb_dequeue(&c3cn->write_queue))) + __kfree_skb(skb); +} + +static void send_abort_req(struct s3_conn *c3cn) +{ + struct sk_buff *skb = c3cn->cpl_abort_req; + struct cpl_abort_req *req; + unsigned int tid = c3cn->tid; + + if (unlikely(c3cn->state == C3CN_STATE_ABORTING) || !skb || + !c3cn->cdev) + return; + + c3cn_set_state(c3cn, C3CN_STATE_ABORTING); + + c3cn_conn_debug("c3cn 0x%p, flag ABORT_RPL + ABORT_SHUT.\n", c3cn); + + c3cn_set_flag(c3cn, C3CN_ABORT_RPL_PENDING); + + /* Purge the send queue so we don't send anything after an abort. */ + c3cn_purge_write_queue(c3cn); + + c3cn->cpl_abort_req = NULL; + req = (struct cpl_abort_req *)skb->head; + + skb->priority = CPL_PRIORITY_DATA; + set_arp_failure_handler(skb, abort_arp_failure); + + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ)); + req->wr.wr_lo = htonl(V_WR_TID(tid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ABORT_REQ, tid)); + req->rsvd0 = htonl(c3cn->snd_nxt); + req->rsvd1 = !c3cn_flag(c3cn, C3CN_TX_DATA_SENT); + req->cmd = CPL_ABORT_SEND_RST; + + l2t_send(c3cn->cdev, skb, c3cn->l2t); +} + +/* + * CPL connection abort reply: host -> + * + * Send an ABORT_RPL message in response of the ABORT_REQ received. + */ +static void send_abort_rpl(struct s3_conn *c3cn, int rst_status) +{ + struct sk_buff *skb = c3cn->cpl_abort_rpl; + struct cpl_abort_rpl *rpl = (struct cpl_abort_rpl *)skb->head; + + c3cn->cpl_abort_rpl = NULL; + + skb->priority = CPL_PRIORITY_DATA; + rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL)); + rpl->wr.wr_lo = htonl(V_WR_TID(c3cn->tid)); + OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_ABORT_RPL, c3cn->tid)); + rpl->cmd = rst_status; + + cxgb3_ofld_send(c3cn->cdev, skb); +} + +/* + * CPL connection rx data ack: host -> + * Send RX credits through an RX_DATA_ACK CPL message. Returns the number of + * credits sent. + */ +static u32 send_rx_credits(struct s3_conn *c3cn, u32 credits, u32 dack) +{ + struct sk_buff *skb; + struct cpl_rx_data_ack *req; + + skb = alloc_skb(sizeof(*req), GFP_ATOMIC); + if (!skb) + return 0; + + req = (struct cpl_rx_data_ack *)__skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RX_DATA_ACK, c3cn->tid)); + req->credit_dack = htonl(dack | V_RX_CREDITS(credits)); + skb->priority = CPL_PRIORITY_ACK; + cxgb3_ofld_send(c3cn->cdev, skb); + return credits; +} + +/* + * CPL connection tx data: host -> + * + * Send iscsi PDU via TX_DATA CPL message. Returns the number of + * credits sent. + * Each TX_DATA consumes work request credit (wrs), so we need to keep track of + * how many we've used so far and how many are pending (i.e., yet ack'ed by T3). + */ + +/* + * For ULP connections HW may inserts digest bytes into the pdu. Those digest + * bytes are not sent by the host but are part of the TCP payload and therefore + * consume TCP sequence space. + */ +static const unsigned int cxgb3_ulp_extra_len[] = { 0, 4, 4, 8 }; +static inline unsigned int ulp_extra_len(const struct sk_buff *skb) +{ + return cxgb3_ulp_extra_len[skb_ulp_mode(skb) & 3]; +} + +static unsigned int wrlen __read_mostly; + +/* + * The number of WRs needed for an skb depends on the number of fragments + * in the skb and whether it has any payload in its main body. This maps the + * length of the gather list represented by an skb into the # of necessary WRs. + * + * The max. length of an skb is controlled by the max pdu size which is ~16K. + * Also, assume the min. fragment length is the sector size (512), then add + * extra fragment counts for iscsi bhs and payload padding. + */ +#define SKB_WR_LIST_SIZE (16384/512 + 3) +static unsigned int skb_wrs[SKB_WR_LIST_SIZE] __read_mostly; + +static void s3_init_wr_tab(unsigned int wr_len) +{ + int i; + + if (skb_wrs[1]) /* already initialized */ + return; + + for (i = 1; i < SKB_WR_LIST_SIZE; i++) { + int sgl_len = (3 * i) / 2 + (i & 1); + + sgl_len += 3; + skb_wrs[i] = (sgl_len <= wr_len + ? 1 : 1 + (sgl_len - 2) / (wr_len - 1)); + } + + wrlen = wr_len * 8; +} + +static inline void reset_wr_list(struct s3_conn *c3cn) +{ + c3cn->wr_pending_head = NULL; +} + +/* + * Add a WR to a connections's list of pending WRs. This is a singly-linked + * list of sk_buffs operating as a FIFO. The head is kept in wr_pending_head + * and the tail in wr_pending_tail. + */ +static inline void enqueue_wr(struct s3_conn *c3cn, + struct sk_buff *skb) +{ + skb->sp = NULL; + + /* + * We want to take an extra reference since both us and the driver + * need to free the packet before it's really freed. We know there's + * just one user currently so we use atomic_set rather than skb_get + * to avoid the atomic op. + */ + atomic_set(&skb->users, 2); + + if (!c3cn->wr_pending_head) + c3cn->wr_pending_head = skb; + else + c3cn->wr_pending_tail->sp = (void *)skb; + c3cn->wr_pending_tail = skb; +} + +static inline struct sk_buff *peek_wr(const struct s3_conn *c3cn) +{ + return c3cn->wr_pending_head; +} + +static inline void free_wr_skb(struct sk_buff *skb) +{ + kfree_skb(skb); +} + +static inline struct sk_buff *dequeue_wr(struct s3_conn *c3cn) +{ + struct sk_buff *skb = c3cn->wr_pending_head; + + if (likely(skb)) { + /* Don't bother clearing the tail */ + c3cn->wr_pending_head = (struct sk_buff *)skb->sp; + skb->sp = NULL; + } + return skb; +} + +static void purge_wr_queue(struct s3_conn *c3cn) +{ + struct sk_buff *skb; + while ((skb = dequeue_wr(c3cn)) != NULL) + free_wr_skb(skb); +} + +static inline void make_tx_data_wr(struct s3_conn *c3cn, struct sk_buff *skb, + int len) +{ + struct tx_data_wr *req; + + skb_reset_transport_header(skb); + req = (struct tx_data_wr *)__skb_push(skb, sizeof(*req)); + req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA)); + req->wr_lo = htonl(V_WR_TID(c3cn->tid)); + req->sndseq = htonl(c3cn->snd_nxt); + /* len includes the length of any HW ULP additions */ + req->len = htonl(len); + req->param = htonl(V_TX_PORT(c3cn->l2t->smt_idx)); + /* V_TX_ULP_SUBMODE sets both the mode and submode */ + req->flags = htonl(V_TX_ULP_SUBMODE(skb_ulp_mode(skb)) | + V_TX_SHOVE((skb_peek(&c3cn->write_queue) ? 0 : 1))); + + if (!c3cn_flag(c3cn, C3CN_TX_DATA_SENT)) { + req->flags |= htonl(V_TX_ACK_PAGES(2) | F_TX_INIT | + V_TX_CPU_IDX(c3cn->qset)); + /* Sendbuffer is in units of 32KB. */ + req->param |= htonl(V_TX_SNDBUF(cxgb3_snd_win >> 15)); + c3cn_set_flag(c3cn, C3CN_TX_DATA_SENT); + } +} + +/** + * c3cn_push_tx_frames -- start transmit + * @c3cn: the offloaded connection + * @req_completion: request wr_ack or not + * + * Prepends TX_DATA_WR or CPL_CLOSE_CON_REQ headers to buffers waiting in a + * connection's send queue and sends them on to T3. Must be called with the + * connection's lock held. Returns the amount of send buffer space that was + * freed as a result of sending queued data to T3. + */ +static void arp_failure_discard(struct t3cdev *cdev, struct sk_buff *skb) +{ + kfree_skb(skb); +} + +static int c3cn_push_tx_frames(struct s3_conn *c3cn, int req_completion) +{ + int total_size = 0; + struct sk_buff *skb; + struct t3cdev *cdev; + struct cxgb3i_sdev_data *cdata; + + if (unlikely(c3cn->state == C3CN_STATE_CONNECTING || + c3cn->state == C3CN_STATE_CLOSE_WAIT_1 || + c3cn->state == C3CN_STATE_ABORTING)) { + c3cn_tx_debug("c3cn 0x%p, in closing state %u.\n", + c3cn, c3cn->state); + return 0; + } + + cdev = c3cn->cdev; + cdata = CXGB3_SDEV_DATA(cdev); + + while (c3cn->wr_avail + && (skb = skb_peek(&c3cn->write_queue)) != NULL) { + int len = skb->len; /* length before skb_push */ + int frags = skb_shinfo(skb)->nr_frags + (len != skb->data_len); + int wrs_needed = skb_wrs[frags]; + + if (wrs_needed > 1 && len + sizeof(struct tx_data_wr) <= wrlen) + wrs_needed = 1; + + WARN_ON(frags >= SKB_WR_LIST_SIZE || wrs_needed < 1); + + if (c3cn->wr_avail < wrs_needed) { + c3cn_tx_debug("c3cn 0x%p, skb len %u/%u, frag %u, " + "wr %d < %u.\n", + c3cn, skb->len, skb->datalen, frags, + wrs_needed, c3cn->wr_avail); + break; + } + + __skb_unlink(skb, &c3cn->write_queue); + skb->priority = CPL_PRIORITY_DATA; + skb->csum = wrs_needed; /* remember this until the WR_ACK */ + c3cn->wr_avail -= wrs_needed; + c3cn->wr_unacked += wrs_needed; + enqueue_wr(c3cn, skb); + + if (likely(CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_NEED_HDR)) { + len += ulp_extra_len(skb); + make_tx_data_wr(c3cn, skb, len); + c3cn->snd_nxt += len; + if ((req_completion + && c3cn->wr_unacked == wrs_needed) + || (CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_COMPL) + || c3cn->wr_unacked >= c3cn->wr_max / 2) { + struct work_request_hdr *wr = cplhdr(skb); + + wr->wr_hi |= htonl(F_WR_COMPL); + c3cn->wr_unacked = 0; + } + CXGB3_SKB_CB(skb)->flags &= ~C3CB_FLAG_NEED_HDR; + } + + total_size += skb->truesize; + set_arp_failure_handler(skb, arp_failure_discard); + l2t_send(cdev, skb, c3cn->l2t); + } + return total_size; +} + +/* + * process_cpl_msg: -> host + * Top-level CPL message processing used by most CPL messages that + * pertain to connections. + */ +static inline void process_cpl_msg(void (*fn)(struct s3_conn *, + struct sk_buff *), + struct s3_conn *c3cn, + struct sk_buff *skb) +{ + spin_lock_bh(&c3cn->lock); + fn(c3cn, skb); + spin_unlock_bh(&c3cn->lock); +} + +/* + * process_cpl_msg_ref: -> host + * Similar to process_cpl_msg() but takes an extra connection reference around + * the call to the handler. Should be used if the handler may drop a + * connection reference. + */ +static inline void process_cpl_msg_ref(void (*fn) (struct s3_conn *, + struct sk_buff *), + struct s3_conn *c3cn, + struct sk_buff *skb) +{ + c3cn_hold(c3cn); + process_cpl_msg(fn, c3cn, skb); + c3cn_put(c3cn); +} + +/* + * Process a CPL_ACT_ESTABLISH message: -> host + * Updates connection state from an active establish CPL message. Runs with + * the connection lock held. + */ + +static inline void s3_free_atid(struct t3cdev *cdev, unsigned int tid) +{ + struct s3_conn *c3cn = cxgb3_free_atid(cdev, tid); + if (c3cn) + c3cn_put(c3cn); +} + +static void c3cn_established(struct s3_conn *c3cn, u32 snd_isn, + unsigned int opt) +{ + c3cn_conn_debug("c3cn 0x%p, state %u.\n", c3cn, c3cn->state); + + c3cn->write_seq = c3cn->snd_nxt = c3cn->snd_una = snd_isn; + + /* + * Causes the first RX_DATA_ACK to supply any Rx credits we couldn't + * pass through opt0. + */ + if (cxgb3_rcv_win > (M_RCV_BUFSIZ << 10)) + c3cn->rcv_wup -= cxgb3_rcv_win - (M_RCV_BUFSIZ << 10); + + dst_confirm(c3cn->dst_cache); + + smp_mb(); + + c3cn_set_state(c3cn, C3CN_STATE_ESTABLISHED); +} + +static void process_act_establish(struct s3_conn *c3cn, struct sk_buff *skb) +{ + struct cpl_act_establish *req = cplhdr(skb); + u32 rcv_isn = ntohl(req->rcv_isn); /* real RCV_ISN + 1 */ + + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + if (unlikely(c3cn->state != C3CN_STATE_CONNECTING)) + cxgb3i_log_error("TID %u expected SYN_SENT, got EST., s %u\n", + c3cn->tid, c3cn->state); + + c3cn->copied_seq = c3cn->rcv_wup = c3cn->rcv_nxt = rcv_isn; + c3cn_established(c3cn, ntohl(req->snd_isn), ntohs(req->tcp_opt)); + + __kfree_skb(skb); + + if (unlikely(c3cn_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED))) + /* upper layer has requested closing */ + send_abort_req(c3cn); + else if (c3cn_push_tx_frames(c3cn, 1)) + cxgb3i_conn_tx_open(c3cn); +} + +static int do_act_establish(struct t3cdev *cdev, struct sk_buff *skb, + void *ctx) +{ + struct cpl_act_establish *req = cplhdr(skb); + unsigned int tid = GET_TID(req); + unsigned int atid = G_PASS_OPEN_TID(ntohl(req->tos_tid)); + struct s3_conn *c3cn = ctx; + struct cxgb3i_sdev_data *cdata = CXGB3_SDEV_DATA(cdev); + + c3cn_conn_debug("rcv, tid 0x%x, c3cn 0x%p, s %u, f 0x%lx.\n", + tid, c3cn, c3cn->state, c3cn->flags); + + c3cn->tid = tid; + c3cn_hold(c3cn); + cxgb3_insert_tid(cdata->cdev, cdata->client, c3cn, tid); + s3_free_atid(cdev, atid); + + c3cn->qset = G_QNUM(ntohl(skb->csum)); + + process_cpl_msg(process_act_establish, c3cn, skb); + return 0; +} + +/* + * Process a CPL_ACT_OPEN_RPL message: -> host + * Handle active open failures. + */ +static int act_open_rpl_status_to_errno(int status) +{ + switch (status) { + case CPL_ERR_CONN_RESET: + return ECONNREFUSED; + case CPL_ERR_ARP_MISS: + return EHOSTUNREACH; + case CPL_ERR_CONN_TIMEDOUT: + return ETIMEDOUT; + case CPL_ERR_TCAM_FULL: + return ENOMEM; + case CPL_ERR_CONN_EXIST: + cxgb3i_log_error("ACTIVE_OPEN_RPL: 4-tuple in use\n"); + return EADDRINUSE; + default: + return EIO; + } +} + +static void act_open_retry_timer(unsigned long data) +{ + struct sk_buff *skb; + struct s3_conn *c3cn = (struct s3_conn *)data; + + c3cn_conn_debug("c3cn 0x%p, state %u.\n", c3cn, c3cn->state); + + spin_lock_bh(&c3cn->lock); + skb = alloc_skb(sizeof(struct cpl_act_open_req), GFP_ATOMIC); + if (!skb) + fail_act_open(c3cn, ENOMEM); + else { + skb->sk = (struct sock *)c3cn; + set_arp_failure_handler(skb, act_open_req_arp_failure); + make_act_open_req(c3cn, skb, c3cn->tid, c3cn->l2t); + l2t_send(c3cn->cdev, skb, c3cn->l2t); + } + spin_unlock_bh(&c3cn->lock); + c3cn_put(c3cn); +} + +static void process_act_open_rpl(struct s3_conn *c3cn, struct sk_buff *skb) +{ + struct cpl_act_open_rpl *rpl = cplhdr(skb); + + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + if (rpl->status == CPL_ERR_CONN_EXIST && + c3cn->retry_timer.function != act_open_retry_timer) { + c3cn->retry_timer.function = act_open_retry_timer; + if (!mod_timer(&c3cn->retry_timer, jiffies + HZ / 2)) + c3cn_hold(c3cn); + } else + fail_act_open(c3cn, act_open_rpl_status_to_errno(rpl->status)); + __kfree_skb(skb); +} + +static int do_act_open_rpl(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + struct s3_conn *c3cn = ctx; + struct cpl_act_open_rpl *rpl = cplhdr(skb); + + c3cn_conn_debug("rcv, status 0x%x, c3cn 0x%p, s %u, f 0x%lx.\n", + rpl->status, c3cn, c3cn->state, c3cn->flags); + + if (rpl->status != CPL_ERR_TCAM_FULL && + rpl->status != CPL_ERR_CONN_EXIST && + rpl->status != CPL_ERR_ARP_MISS) + cxgb3_queue_tid_release(cdev, GET_TID(rpl)); + + process_cpl_msg_ref(process_act_open_rpl, c3cn, skb); + return 0; +} + +/* + * Process PEER_CLOSE CPL messages: -> host + * Handle peer FIN. + */ +static void process_peer_close(struct s3_conn *c3cn, struct sk_buff *skb) +{ + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + if (c3cn_flag(c3cn, C3CN_ABORT_RPL_PENDING)) + goto out; + + switch (c3cn->state) { + case C3CN_STATE_ESTABLISHED: + c3cn_set_state(c3cn, C3CN_STATE_PASSIVE_CLOSE); + break; + case C3CN_STATE_ACTIVE_CLOSE: + c3cn_set_state(c3cn, C3CN_STATE_CLOSE_WAIT_2); + break; + case C3CN_STATE_CLOSE_WAIT_1: + c3cn_closed(c3cn); + break; + case C3CN_STATE_ABORTING: + break; + default: + cxgb3i_log_error("%s: peer close, TID %u in bad state %u\n", + c3cn->cdev->name, c3cn->tid, c3cn->state); + } + + cxgb3i_conn_closing(c3cn); +out: + __kfree_skb(skb); +} + +static int do_peer_close(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + struct s3_conn *c3cn = ctx; + + c3cn_conn_debug("rcv, c3cn 0x%p, s %u, f 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + process_cpl_msg_ref(process_peer_close, c3cn, skb); + return 0; +} + +/* + * Process CLOSE_CONN_RPL CPL message: -> host + * Process a peer ACK to our FIN. + */ +static void process_close_con_rpl(struct s3_conn *c3cn, struct sk_buff *skb) +{ + struct cpl_close_con_rpl *rpl = cplhdr(skb); + + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + c3cn->snd_una = ntohl(rpl->snd_nxt) - 1; /* exclude FIN */ + + if (c3cn_flag(c3cn, C3CN_ABORT_RPL_PENDING)) + goto out; + + switch (c3cn->state) { + case C3CN_STATE_ACTIVE_CLOSE: + c3cn_set_state(c3cn, C3CN_STATE_CLOSE_WAIT_1); + break; + case C3CN_STATE_CLOSE_WAIT_1: + case C3CN_STATE_CLOSE_WAIT_2: + c3cn_closed(c3cn); + break; + case C3CN_STATE_ABORTING: + break; + default: + cxgb3i_log_error("%s: close_rpl, TID %u in bad state %u\n", + c3cn->cdev->name, c3cn->tid, c3cn->state); + } + +out: + kfree_skb(skb); +} + +static int do_close_con_rpl(struct t3cdev *cdev, struct sk_buff *skb, + void *ctx) +{ + struct s3_conn *c3cn = ctx; + + c3cn_conn_debug("rcv, c3cn 0x%p, s %u, f 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + process_cpl_msg_ref(process_close_con_rpl, c3cn, skb); + return 0; +} + +/* + * Process ABORT_REQ_RSS CPL message: -> host + * Process abort requests. If we are waiting for an ABORT_RPL we ignore this + * request except that we need to reply to it. + */ + +static int abort_status_to_errno(struct s3_conn *c3cn, int abort_reason, + int *need_rst) +{ + switch (abort_reason) { + case CPL_ERR_BAD_SYN: /* fall through */ + case CPL_ERR_CONN_RESET: + return c3cn->state > C3CN_STATE_ESTABLISHED ? + EPIPE : ECONNRESET; + case CPL_ERR_XMIT_TIMEDOUT: + case CPL_ERR_PERSIST_TIMEDOUT: + case CPL_ERR_FINWAIT2_TIMEDOUT: + case CPL_ERR_KEEPALIVE_TIMEDOUT: + return ETIMEDOUT; + default: + return EIO; + } +} + +static void process_abort_req(struct s3_conn *c3cn, struct sk_buff *skb) +{ + int rst_status = CPL_ABORT_NO_RST; + const struct cpl_abort_req_rss *req = cplhdr(skb); + + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + if (!c3cn_flag(c3cn, C3CN_ABORT_REQ_RCVD)) { + c3cn_set_flag(c3cn, C3CN_ABORT_REQ_RCVD); + c3cn_set_state(c3cn, C3CN_STATE_ABORTING); + __kfree_skb(skb); + return; + } + + c3cn_clear_flag(c3cn, C3CN_ABORT_REQ_RCVD); + send_abort_rpl(c3cn, rst_status); + + if (!c3cn_flag(c3cn, C3CN_ABORT_RPL_PENDING)) { + c3cn->err = + abort_status_to_errno(c3cn, req->status, &rst_status); + c3cn_closed(c3cn); + } +} + +static int do_abort_req(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + const struct cpl_abort_req_rss *req = cplhdr(skb); + struct s3_conn *c3cn = ctx; + + c3cn_conn_debug("rcv, c3cn 0x%p, s 0x%x, f 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + if (req->status == CPL_ERR_RTX_NEG_ADVICE || + req->status == CPL_ERR_PERSIST_NEG_ADVICE) { + __kfree_skb(skb); + return 0; + } + + process_cpl_msg_ref(process_abort_req, c3cn, skb); + return 0; +} + +/* + * Process ABORT_RPL_RSS CPL message: -> host + * Process abort replies. We only process these messages if we anticipate + * them as the coordination between SW and HW in this area is somewhat lacking + * and sometimes we get ABORT_RPLs after we are done with the connection that + * originated the ABORT_REQ. + */ +static void process_abort_rpl(struct s3_conn *c3cn, struct sk_buff *skb) +{ + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + if (c3cn_flag(c3cn, C3CN_ABORT_RPL_PENDING)) { + if (!c3cn_flag(c3cn, C3CN_ABORT_RPL_RCVD)) + c3cn_set_flag(c3cn, C3CN_ABORT_RPL_RCVD); + else { + c3cn_clear_flag(c3cn, C3CN_ABORT_RPL_RCVD); + c3cn_clear_flag(c3cn, C3CN_ABORT_RPL_PENDING); + if (c3cn_flag(c3cn, C3CN_ABORT_REQ_RCVD)) + cxgb3i_log_error("%s tid %u, ABORT_RPL_RSS\n", + c3cn->cdev->name, c3cn->tid); + c3cn_closed(c3cn); + } + } + __kfree_skb(skb); +} + +static int do_abort_rpl(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + struct cpl_abort_rpl_rss *rpl = cplhdr(skb); + struct s3_conn *c3cn = ctx; + + c3cn_conn_debug("rcv, status 0x%x, c3cn 0x%p, s %u, 0x%lx.\n", + rpl->status, c3cn, c3cn ? c3cn->state : 0, + c3cn ? c3cn->flags : 0UL); + + /* + * Ignore replies to post-close aborts indicating that the abort was + * requested too late. These connections are terminated when we get + * PEER_CLOSE or CLOSE_CON_RPL and by the time the abort_rpl_rss + * arrives the TID is either no longer used or it has been recycled. + */ + if (rpl->status == CPL_ERR_ABORT_FAILED) + goto discard; + + /* + * Sometimes we've already closed the connection, e.g., a post-close + * abort races with ABORT_REQ_RSS, the latter frees the connection + * expecting the ABORT_REQ will fail with CPL_ERR_ABORT_FAILED, + * but FW turns the ABORT_REQ into a regular one and so we get + * ABORT_RPL_RSS with status 0 and no connection. + */ + if (!c3cn) + goto discard; + + process_cpl_msg_ref(process_abort_rpl, c3cn, skb); + return 0; + +discard: + __kfree_skb(skb); + return 0; +} + +/* + * Process RX_ISCSI_HDR CPL message: -> host + * Handle received PDUs, the payload could be DDP'ed. If not, the payload + * follow after the bhs. + */ +static void process_rx_iscsi_hdr(struct s3_conn *c3cn, struct sk_buff *skb) +{ + struct cpl_iscsi_hdr *hdr_cpl = cplhdr(skb); + struct cpl_iscsi_hdr_norss data_cpl; + struct cpl_rx_data_ddp_norss ddp_cpl; + unsigned int hdr_len, data_len, status; + unsigned int len; + int err; + + if (unlikely(c3cn->state >= C3CN_STATE_PASSIVE_CLOSE)) { + if (c3cn->state != C3CN_STATE_ABORTING) + send_abort_req(c3cn); + __kfree_skb(skb); + return; + } + + CXGB3_SKB_CB(skb)->seq = ntohl(hdr_cpl->seq); + CXGB3_SKB_CB(skb)->flags = 0; + + skb_reset_transport_header(skb); + __skb_pull(skb, sizeof(struct cpl_iscsi_hdr)); + + len = hdr_len = ntohs(hdr_cpl->len); + /* msg coalesce is off or not enough data received */ + if (skb->len <= hdr_len) { + cxgb3i_log_error("%s: TID %u, ISCSI_HDR, skb len %u < %u.\n", + c3cn->cdev->name, c3cn->tid, + skb->len, hdr_len); + goto abort_conn; + } + + err = skb_copy_bits(skb, skb->len - sizeof(ddp_cpl), &ddp_cpl, + sizeof(ddp_cpl)); + if (err < 0) + goto abort_conn; + + skb_ulp_mode(skb) = ULP2_FLAG_DATA_READY; + skb_ulp_pdulen(skb) = ntohs(ddp_cpl.len); + skb_ulp_ddigest(skb) = ntohl(ddp_cpl.ulp_crc); + status = ntohl(ddp_cpl.ddp_status); + + c3cn_rx_debug("rx skb 0x%p, len %u, pdulen %u, ddp status 0x%x.\n", + skb, skb->len, skb_ulp_pdulen(skb), status); + + if (status & (1 << RX_DDP_STATUS_HCRC_SHIFT)) + skb_ulp_mode(skb) |= ULP2_FLAG_HCRC_ERROR; + if (status & (1 << RX_DDP_STATUS_DCRC_SHIFT)) + skb_ulp_mode(skb) |= ULP2_FLAG_DCRC_ERROR; + if (status & (1 << RX_DDP_STATUS_PAD_SHIFT)) + skb_ulp_mode(skb) |= ULP2_FLAG_PAD_ERROR; + + if (skb->len > (hdr_len + sizeof(ddp_cpl))) { + err = skb_copy_bits(skb, hdr_len, &data_cpl, sizeof(data_cpl)); + if (err < 0) + goto abort_conn; + data_len = ntohs(data_cpl.len); + len += sizeof(data_cpl) + data_len; + } else if (status & (1 << RX_DDP_STATUS_DDP_SHIFT)) + skb_ulp_mode(skb) |= ULP2_FLAG_DATA_DDPED; + + c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_ulp_pdulen(skb); + __pskb_trim(skb, len); + __skb_queue_tail(&c3cn->receive_queue, skb); + cxgb3i_conn_pdu_ready(c3cn); + + return; + +abort_conn: + send_abort_req(c3cn); + __kfree_skb(skb); +} + +static int do_iscsi_hdr(struct t3cdev *t3dev, struct sk_buff *skb, void *ctx) +{ + struct s3_conn *c3cn = ctx; + + process_cpl_msg(process_rx_iscsi_hdr, c3cn, skb); + return 0; +} + +/* + * Process TX_DATA_ACK CPL messages: -> host + * Process an acknowledgment of WR completion. Advance snd_una and send the + * next batch of work requests from the write queue. + */ +static void process_wr_ack(struct s3_conn *c3cn, struct sk_buff *skb) +{ + struct cpl_wr_ack *hdr = cplhdr(skb); + unsigned int credits = ntohs(hdr->credits); + u32 snd_una = ntohl(hdr->snd_una); + + c3cn->wr_avail += credits; + if (c3cn->wr_unacked > c3cn->wr_max - c3cn->wr_avail) + c3cn->wr_unacked = c3cn->wr_max - c3cn->wr_avail; + + while (credits) { + struct sk_buff *p = peek_wr(c3cn); + + if (unlikely(!p)) { + cxgb3i_log_error("%u WR_ACK credits for TID %u with " + "nothing pending, state %u\n", + credits, c3cn->tid, c3cn->state); + break; + } + if (unlikely(credits < p->csum)) { + p->csum -= credits; + break; + } else { + dequeue_wr(c3cn); + credits -= p->csum; + free_wr_skb(p); + } + } + + if (unlikely(before(snd_una, c3cn->snd_una))) + goto out_free; + + if (c3cn->snd_una != snd_una) { + c3cn->snd_una = snd_una; + dst_confirm(c3cn->dst_cache); + } + + if (skb_queue_len(&c3cn->write_queue) && c3cn_push_tx_frames(c3cn, 0)) + cxgb3i_conn_tx_open(c3cn); +out_free: + __kfree_skb(skb); +} + +static int do_wr_ack(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + struct s3_conn *c3cn = ctx; + + process_cpl_msg(process_wr_ack, c3cn, skb); + return 0; +} + +/* + * for each connection, pre-allocate skbs needed for close/abort requests. So + * that we can service the request right away. + */ +static void c3cn_free_cpl_skbs(struct s3_conn *c3cn) +{ + if (c3cn->cpl_close) + kfree_skb(c3cn->cpl_close); + if (c3cn->cpl_abort_req) + kfree_skb(c3cn->cpl_abort_req); + if (c3cn->cpl_abort_rpl) + kfree_skb(c3cn->cpl_abort_rpl); +} + +static int c3cn_alloc_cpl_skbs(struct s3_conn *c3cn) +{ + c3cn->cpl_close = alloc_skb(sizeof(struct cpl_close_con_req), + GFP_KERNEL); + if (!c3cn->cpl_close) + return -ENOMEM; + skb_put(c3cn->cpl_close, sizeof(struct cpl_close_con_req)); + + c3cn->cpl_abort_req = alloc_skb(sizeof(struct cpl_abort_req), + GFP_KERNEL); + if (!c3cn->cpl_abort_req) + goto free_cpl_skbs; + skb_put(c3cn->cpl_abort_req, sizeof(struct cpl_abort_req)); + + c3cn->cpl_abort_rpl = alloc_skb(sizeof(struct cpl_abort_rpl), + GFP_KERNEL); + if (!c3cn->cpl_abort_rpl) + goto free_cpl_skbs; + skb_put(c3cn->cpl_abort_rpl, sizeof(struct cpl_abort_rpl)); + + return 0; + +free_cpl_skbs: + c3cn_free_cpl_skbs(c3cn); + return -ENOMEM; +} + +/** + * c3cn_release_offload_resources - release offload resource + * @c3cn: the offloaded iscsi tcp connection. + * Release resources held by an offload connection (TID, L2T entry, etc.) + */ +static void c3cn_release_offload_resources(struct s3_conn *c3cn) +{ + struct t3cdev *cdev = c3cn->cdev; + unsigned int tid = c3cn->tid; + + if (!cdev) + return; + + c3cn->qset = 0; + + c3cn_free_cpl_skbs(c3cn); + + if (c3cn->wr_avail != c3cn->wr_max) { + purge_wr_queue(c3cn); + reset_wr_list(c3cn); + } + + if (c3cn->l2t) { + l2t_release(L2DATA(cdev), c3cn->l2t); + c3cn->l2t = NULL; + } + + if (c3cn->state == C3CN_STATE_CONNECTING) /* we have ATID */ + s3_free_atid(cdev, tid); + else { /* we have TID */ + cxgb3_remove_tid(cdev, (void *)c3cn, tid); + c3cn_put(c3cn); + } + + c3cn->cdev = NULL; +} + +/** + * cxgb3i_c3cn_create - allocate and initialize an s3_conn structure + * returns the s3_conn structure allocated. + */ +struct s3_conn *cxgb3i_c3cn_create(void) +{ + struct s3_conn *c3cn; + + c3cn = kzalloc(sizeof(*c3cn), GFP_KERNEL); + if (!c3cn) + return NULL; + + /* pre-allocate close/abort cpl, so we don't need to wait for memory + when close/abort is requested. */ + if (c3cn_alloc_cpl_skbs(c3cn) < 0) + goto free_c3cn; + + c3cn_conn_debug("alloc c3cn 0x%p.\n", c3cn); + + c3cn->flags = 0; + spin_lock_init(&c3cn->lock); + atomic_set(&c3cn->refcnt, 1); + skb_queue_head_init(&c3cn->receive_queue); + skb_queue_head_init(&c3cn->write_queue); + setup_timer(&c3cn->retry_timer, NULL, (unsigned long)c3cn); + rwlock_init(&c3cn->callback_lock); + + return c3cn; + +free_c3cn: + kfree(c3cn); + return NULL; +} + +static void c3cn_active_close(struct s3_conn *c3cn) +{ + int data_lost; + int close_req = 0; + + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + dst_confirm(c3cn->dst_cache); + + c3cn_hold(c3cn); + spin_lock_bh(&c3cn->lock); + + data_lost = skb_queue_len(&c3cn->receive_queue); + __skb_queue_purge(&c3cn->receive_queue); + + switch (c3cn->state) { + case C3CN_STATE_CLOSED: + case C3CN_STATE_ACTIVE_CLOSE: + case C3CN_STATE_CLOSE_WAIT_1: + case C3CN_STATE_CLOSE_WAIT_2: + case C3CN_STATE_ABORTING: + /* nothing need to be done */ + break; + case C3CN_STATE_CONNECTING: + /* defer until cpl_act_open_rpl or cpl_act_establish */ + c3cn_set_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED); + break; + case C3CN_STATE_ESTABLISHED: + close_req = 1; + c3cn_set_state(c3cn, C3CN_STATE_ACTIVE_CLOSE); + break; + case C3CN_STATE_PASSIVE_CLOSE: + close_req = 1; + c3cn_set_state(c3cn, C3CN_STATE_CLOSE_WAIT_2); + break; + } + + if (close_req) { + if (data_lost) + /* Unread data was tossed, zap the connection. */ + send_abort_req(c3cn); + else + send_close_req(c3cn); + } + + spin_unlock_bh(&c3cn->lock); + c3cn_put(c3cn); +} + +/** + * cxgb3i_c3cn_release - close and release an iscsi tcp connection and any + * resource held + * @c3cn: the iscsi tcp connection + */ +void cxgb3i_c3cn_release(struct s3_conn *c3cn) +{ + c3cn_conn_debug("c3cn 0x%p, s %u, f 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + if (likely(c3cn->state != C3CN_STATE_CONNECTING)) + c3cn_active_close(c3cn); + else + c3cn_set_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED); + c3cn_put(c3cn); +} + +static int is_cxgb3_dev(struct net_device *dev) +{ + struct cxgb3i_sdev_data *cdata; + + write_lock(&cdata_rwlock); + list_for_each_entry(cdata, &cdata_list, list) { + struct adap_ports *ports = &cdata->ports; + int i; + + for (i = 0; i < ports->nports; i++) + if (dev == ports->lldevs[i]) { + write_unlock(&cdata_rwlock); + return 1; + } + } + write_unlock(&cdata_rwlock); + return 0; +} + +/** + * cxgb3_egress_dev - return the cxgb3 egress device + * @root_dev: the root device anchoring the search + * @c3cn: the connection used to determine egress port in bonding mode + * @context: in bonding mode, indicates a connection set up or failover + * + * Return egress device or NULL if the egress device isn't one of our ports. + */ +static struct net_device *cxgb3_egress_dev(struct net_device *root_dev, + struct s3_conn *c3cn, + int context) +{ + while (root_dev) { + if (root_dev->priv_flags & IFF_802_1Q_VLAN) + root_dev = vlan_dev_real_dev(root_dev); + else if (is_cxgb3_dev(root_dev)) + return root_dev; + else + return NULL; + } + return NULL; +} + +static struct rtable *find_route(__be32 saddr, __be32 daddr, + __be16 sport, __be16 dport) +{ + struct rtable *rt; + struct flowi fl = { + .oif = 0, + .nl_u = { + .ip4_u = { + .daddr = daddr, + .saddr = saddr, + .tos = 0 } }, + .proto = IPPROTO_TCP, + .uli_u = { + .ports = { + .sport = sport, + .dport = dport } } }; + + if (ip_route_output_flow(&init_net, &rt, &fl, NULL, 0)) + return NULL; + return rt; +} + +/* + * Assign offload parameters to some connection fields. + */ +static void init_offload_conn(struct s3_conn *c3cn, + struct t3cdev *cdev, + struct dst_entry *dst) +{ + BUG_ON(c3cn->cdev != cdev); + c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs; + c3cn->wr_unacked = 0; + c3cn->mss_idx = select_mss(c3cn, dst_mtu(dst)); + + reset_wr_list(c3cn); +} + +static int initiate_act_open(struct s3_conn *c3cn, struct net_device *dev) +{ + struct cxgb3i_sdev_data *cdata = NDEV2CDATA(dev); + struct t3cdev *cdev = cdata->cdev; + struct dst_entry *dst = c3cn->dst_cache; + struct sk_buff *skb; + + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + /* + * Initialize connection data. Note that the flags and ULP mode are + * initialized higher up ... + */ + c3cn->dev = dev; + c3cn->cdev = cdev; + c3cn->tid = cxgb3_alloc_atid(cdev, cdata->client, c3cn); + if (c3cn->tid < 0) + goto out_err; + + c3cn->qset = 0; + c3cn->l2t = t3_l2t_get(cdev, dst->neighbour, dev); + if (!c3cn->l2t) + goto free_tid; + + skb = alloc_skb(sizeof(struct cpl_act_open_req), GFP_KERNEL); + if (!skb) + goto free_l2t; + + skb->sk = (struct sock *)c3cn; + set_arp_failure_handler(skb, act_open_req_arp_failure); + + c3cn_hold(c3cn); + + init_offload_conn(c3cn, cdev, dst); + c3cn->err = 0; + + make_act_open_req(c3cn, skb, c3cn->tid, c3cn->l2t); + l2t_send(cdev, skb, c3cn->l2t); + return 0; + +free_l2t: + l2t_release(L2DATA(cdev), c3cn->l2t); +free_tid: + s3_free_atid(cdev, c3cn->tid); + c3cn->tid = 0; +out_err: + return -1; +} + + +/** + * cxgb3i_c3cn_connect - initiates an iscsi tcp connection to a given address + * @c3cn: the iscsi tcp connection + * @usin: destination address + * + * return 0 if active open request is sent, < 0 otherwise. + */ +int cxgb3i_c3cn_connect(struct s3_conn *c3cn, struct sockaddr_in *usin) +{ + struct rtable *rt; + struct net_device *dev; + struct cxgb3i_sdev_data *cdata; + struct t3cdev *cdev; + __be32 sipv4; + int err; + + if (usin->sin_family != AF_INET) + return -EAFNOSUPPORT; + + c3cn->daddr.sin_port = usin->sin_port; + c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr; + + rt = find_route(c3cn->saddr.sin_addr.s_addr, + c3cn->daddr.sin_addr.s_addr, + c3cn->saddr.sin_port, + c3cn->daddr.sin_port); + if (rt == NULL) { + c3cn_conn_debug("NO route to 0x%x, port %u.\n", + c3cn->daddr.sin_addr.s_addr, + ntohs(c3cn->daddr.sin_port)); + return -ENETUNREACH; + } + + if (rt->rt_flags & (RTCF_MULTICAST | RTCF_BROADCAST)) { + c3cn_conn_debug("multi-cast route to 0x%x, port %u.\n", + c3cn->daddr.sin_addr.s_addr, + ntohs(c3cn->daddr.sin_port)); + ip_rt_put(rt); + return -ENETUNREACH; + } + + if (!c3cn->saddr.sin_addr.s_addr) + c3cn->saddr.sin_addr.s_addr = rt->rt_src; + + /* now commit destination to connection */ + c3cn->dst_cache = &rt->u.dst; + + /* try to establish an offloaded connection */ + dev = cxgb3_egress_dev(c3cn->dst_cache->dev, c3cn, 0); + if (dev == NULL) { + c3cn_conn_debug("c3cn 0x%p, egress dev NULL.\n", c3cn); + return -ENETUNREACH; + } + cdata = NDEV2CDATA(dev); + cdev = cdata->cdev; + + /* get a source port if one hasn't been provided */ + err = c3cn_get_port(c3cn, cdata); + if (err) + return err; + + c3cn_conn_debug("c3cn 0x%p get port %u.\n", + c3cn, ntohs(c3cn->saddr.sin_port)); + + sipv4 = cxgb3i_get_private_ipv4addr(dev); + if (!sipv4) { + c3cn_conn_debug("c3cn 0x%p, iscsi ip not configured.\n", c3cn); + sipv4 = c3cn->saddr.sin_addr.s_addr; + cxgb3i_set_private_ipv4addr(dev, sipv4); + } else + c3cn->saddr.sin_addr.s_addr = sipv4; + + c3cn_conn_debug("c3cn 0x%p, %u.%u.%u.%u,%u-%u.%u.%u.%u,%u SYN_SENT.\n", + c3cn, NIPQUAD(c3cn->saddr.sin_addr.s_addr), + ntohs(c3cn->saddr.sin_port), + NIPQUAD(c3cn->daddr.sin_addr.s_addr), + ntohs(c3cn->daddr.sin_port)); + + c3cn_set_state(c3cn, C3CN_STATE_CONNECTING); + if (!initiate_act_open(c3cn, dev)) + return 0; + + /* + * If we get here, we don't have an offload connection so simply + * return a failure. + */ + err = -ENOTSUPP; + + /* + * This trashes the connection and releases the local port, + * if necessary. + */ + c3cn_conn_debug("c3cn 0x%p -> CLOSED.\n", c3cn); + c3cn_set_state(c3cn, C3CN_STATE_CLOSED); + ip_rt_put(rt); + c3cn_put_port(c3cn); + c3cn->daddr.sin_port = 0; + return err; +} + +/** + * cxgb3i_c3cn_rx_credits - ack received tcp data. + * @c3cn: iscsi tcp connection + * @copied: # of bytes processed + * + * Called after some received data has been read. It returns RX credits + * to the HW for the amount of data processed. + */ +void cxgb3i_c3cn_rx_credits(struct s3_conn *c3cn, int copied) +{ + struct t3cdev *cdev; + int must_send; + u32 credits, dack = 0; + + if (c3cn->state != C3CN_STATE_ESTABLISHED) + return; + + credits = c3cn->copied_seq - c3cn->rcv_wup; + if (unlikely(!credits)) + return; + + cdev = c3cn->cdev; + + if (unlikely(cxgb3_rx_credit_thres == 0)) + return; + + dack = F_RX_DACK_CHANGE | V_RX_DACK_MODE(1); + + /* + * For coalescing to work effectively ensure the receive window has + * at least 16KB left. + */ + must_send = credits + 16384 >= cxgb3_rcv_win; + + if (must_send || credits >= cxgb3_rx_credit_thres) + c3cn->rcv_wup += send_rx_credits(c3cn, credits, dack); +} + +/** + * cxgb3i_c3cn_send_pdus - send the skbs containing iscsi pdus + * @c3cn: iscsi tcp connection + * @skb: skb contains the iscsi pdu + * + * Add a list of skbs to a connection send queue. The skbs must comply with + * the max size limit of the device and have a headroom of at least + * TX_HEADER_LEN bytes. + * Return # of bytes queued. + */ +int cxgb3i_c3cn_send_pdus(struct s3_conn *c3cn, struct sk_buff *skb) +{ + struct sk_buff *next; + int err, copied = 0; + + spin_lock_bh(&c3cn->lock); + + if (c3cn->state != C3CN_STATE_ESTABLISHED) { + c3cn_tx_debug("c3cn 0x%p, not in est. state %u.\n", + c3cn, c3cn->state); + err = -EAGAIN; + goto out_err; + } + + err = -EPIPE; + if (c3cn->err) { + c3cn_tx_debug("c3cn 0x%p, err %d.\n", c3cn, c3cn->err); + goto out_err; + } + + while (skb) { + int frags = skb_shinfo(skb)->nr_frags + + (skb->len != skb->data_len); + + if (unlikely(skb_headroom(skb) < TX_HEADER_LEN)) { + c3cn_tx_debug("c3cn 0x%p, skb head.\n", c3cn); + err = -EINVAL; + goto out_err; + } + + if (frags >= SKB_WR_LIST_SIZE) { + cxgb3i_log_error("c3cn 0x%p, tx frags %d, len %u,%u.\n", + c3cn, skb_shinfo(skb)->nr_frags, + skb->len, skb->data_len); + err = -EINVAL; + goto out_err; + } + + next = skb->next; + skb->next = NULL; + skb_entail(c3cn, skb, C3CB_FLAG_NO_APPEND | C3CB_FLAG_NEED_HDR); + copied += skb->len; + c3cn->write_seq += skb->len + ulp_extra_len(skb); + skb = next; + } +done: + if (likely(skb_queue_len(&c3cn->write_queue))) + c3cn_push_tx_frames(c3cn, 1); + spin_unlock_bh(&c3cn->lock); + return copied; + +out_err: + if (copied == 0 && err == -EPIPE) + copied = c3cn->err ? c3cn->err : -EPIPE; + goto done; +} + +static void sdev_data_cleanup(struct cxgb3i_sdev_data *cdata) +{ + struct adap_ports *ports = &cdata->ports; + int i; + + for (i = 0; i < ports->nports; i++) + NDEV2CDATA(ports->lldevs[i]) = NULL; + cxgb3i_free_big_mem(cdata); +} + +void cxgb3i_sdev_cleanup(void) +{ + struct cxgb3i_sdev_data *cdata; + + write_lock(&cdata_rwlock); + list_for_each_entry(cdata, &cdata_list, list) { + list_del(&cdata->list); + sdev_data_cleanup(cdata); + } + write_unlock(&cdata_rwlock); +} + +int cxgb3i_sdev_init(cxgb3_cpl_handler_func *cpl_handlers) +{ + cpl_handlers[CPL_ACT_ESTABLISH] = do_act_establish; + cpl_handlers[CPL_ACT_OPEN_RPL] = do_act_open_rpl; + cpl_handlers[CPL_PEER_CLOSE] = do_peer_close; + cpl_handlers[CPL_ABORT_REQ_RSS] = do_abort_req; + cpl_handlers[CPL_ABORT_RPL_RSS] = do_abort_rpl; + cpl_handlers[CPL_CLOSE_CON_RPL] = do_close_con_rpl; + cpl_handlers[CPL_TX_DMA_ACK] = do_wr_ack; + cpl_handlers[CPL_ISCSI_HDR] = do_iscsi_hdr; + + if (cxgb3_max_connect > CXGB3I_MAX_CONN) + cxgb3_max_connect = CXGB3I_MAX_CONN; + return 0; +} + +/** + * cxgb3i_sdev_add - allocate and initialize resources for each adapter found + * @cdev: t3cdev adapter + * @client: cxgb3 driver client + */ +void cxgb3i_sdev_add(struct t3cdev *cdev, struct cxgb3_client *client) +{ + struct cxgb3i_sdev_data *cdata; + struct ofld_page_info rx_page_info; + unsigned int wr_len; + int mapsize = DIV_ROUND_UP(cxgb3_max_connect, + 8 * sizeof(unsigned long)); + int i; + + cdata = cxgb3i_alloc_big_mem(sizeof(*cdata) + mapsize, GFP_KERNEL); + if (!cdata) + return; + + if (cdev->ctl(cdev, GET_WR_LEN, &wr_len) < 0 || + cdev->ctl(cdev, GET_PORTS, &cdata->ports) < 0 || + cdev->ctl(cdev, GET_RX_PAGE_INFO, &rx_page_info) < 0) + goto free_cdata; + + s3_init_wr_tab(wr_len); + + INIT_LIST_HEAD(&cdata->list); + cdata->cdev = cdev; + cdata->client = client; + + for (i = 0; i < cdata->ports.nports; i++) + NDEV2CDATA(cdata->ports.lldevs[i]) = cdata; + + write_lock(&cdata_rwlock); + list_add_tail(&cdata->list, &cdata_list); + write_unlock(&cdata_rwlock); + + return; + +free_cdata: + cxgb3i_free_big_mem(cdata); +} + +/** + * cxgb3i_sdev_remove - free the allocated resources for the adapter + * @cdev: t3cdev adapter + */ +void cxgb3i_sdev_remove(struct t3cdev *cdev) +{ + struct cxgb3i_sdev_data *cdata = CXGB3_SDEV_DATA(cdev); + + write_lock(&cdata_rwlock); + list_del(&cdata->list); + write_unlock(&cdata_rwlock); + + sdev_data_cleanup(cdata); +} diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.h b/drivers/scsi/cxgb3i/cxgb3i_offload.h new file mode 100644 index 000000000000..5b93d629e5c1 --- /dev/null +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.h @@ -0,0 +1,231 @@ +/* + * cxgb3i_offload.h: Chelsio S3xx iscsi offloaded tcp connection management + * + * Copyright (C) 2003-2008 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + * + * Written by: Dimitris Michailidis (dm@chelsio.com) + * Karen Xie (kxie@chelsio.com) + */ + +#ifndef _CXGB3I_OFFLOAD_H +#define _CXGB3I_OFFLOAD_H + +#include +#include + +#include "common.h" +#include "adapter.h" +#include "t3cdev.h" +#include "cxgb3_offload.h" + +#define cxgb3i_log_error(fmt...) printk(KERN_ERR "cxgb3i: ERR! " fmt) +#define cxgb3i_log_warn(fmt...) printk(KERN_WARNING "cxgb3i: WARN! " fmt) +#define cxgb3i_log_info(fmt...) printk(KERN_INFO "cxgb3i: " fmt) +#define cxgb3i_log_debug(fmt, args...) \ + printk(KERN_INFO "cxgb3i: %s - " fmt, __func__ , ## args) + +/** + * struct s3_conn - an iscsi tcp connection structure + * + * @dev: net device of with connection + * @cdev: adapter t3cdev for net device + * @flags: see c3cn_flags below + * @tid: connection id assigned by the h/w + * @qset: queue set used by connection + * @mss_idx: Maximum Segment Size table index + * @l2t: ARP resolution entry for offload packets + * @wr_max: maximum in-flight writes + * @wr_avail: number of writes available + * @wr_unacked: writes since last request for completion notification + * @wr_pending_head: head of pending write queue + * @wr_pending_tail: tail of pending write queue + * @cpl_close: skb for cpl_close_req + * @cpl_abort_req: skb for cpl_abort_req + * @cpl_abort_rpl: skb for cpl_abort_rpl + * @lock: connection status lock + * @refcnt: reference count on connection + * @state: connection state + * @saddr: source ip/port address + * @daddr: destination ip/port address + * @dst_cache: reference to destination route + * @receive_queue: received PDUs + * @write_queue: un-pushed pending writes + * @retry_timer: retry timer for various operations + * @err: connection error status + * @callback_lock: lock for opaque user context + * @user_data: opaque user context + * @rcv_nxt: next receive seq. # + * @copied_seq: head of yet unread data + * @rcv_wup: rcv_nxt on last window update sent + * @snd_nxt: next sequence we send + * @snd_una: first byte we want an ack for + * @write_seq: tail+1 of data held in send buffer + */ +struct s3_conn { + struct net_device *dev; + struct t3cdev *cdev; + unsigned long flags; + int tid; + int qset; + int mss_idx; + struct l2t_entry *l2t; + int wr_max; + int wr_avail; + int wr_unacked; + struct sk_buff *wr_pending_head; + struct sk_buff *wr_pending_tail; + struct sk_buff *cpl_close; + struct sk_buff *cpl_abort_req; + struct sk_buff *cpl_abort_rpl; + spinlock_t lock; + atomic_t refcnt; + volatile unsigned int state; + struct sockaddr_in saddr; + struct sockaddr_in daddr; + struct dst_entry *dst_cache; + struct sk_buff_head receive_queue; + struct sk_buff_head write_queue; + struct timer_list retry_timer; + int err; + rwlock_t callback_lock; + void *user_data; + + u32 rcv_nxt; + u32 copied_seq; + u32 rcv_wup; + u32 snd_nxt; + u32 snd_una; + u32 write_seq; +}; + +/* + * connection state + */ +enum conn_states { + C3CN_STATE_CONNECTING = 1, + C3CN_STATE_ESTABLISHED, + C3CN_STATE_ACTIVE_CLOSE, + C3CN_STATE_PASSIVE_CLOSE, + C3CN_STATE_CLOSE_WAIT_1, + C3CN_STATE_CLOSE_WAIT_2, + C3CN_STATE_ABORTING, + C3CN_STATE_CLOSED, +}; + +static inline unsigned int c3cn_is_closing(const struct s3_conn *c3cn) +{ + return c3cn->state >= C3CN_STATE_ACTIVE_CLOSE; +} +static inline unsigned int c3cn_is_established(const struct s3_conn *c3cn) +{ + return c3cn->state == C3CN_STATE_ESTABLISHED; +} + +/* + * Connection flags -- many to track some close related events. + */ +enum c3cn_flags { + C3CN_ABORT_RPL_RCVD, /* received one ABORT_RPL_RSS message */ + C3CN_ABORT_REQ_RCVD, /* received one ABORT_REQ_RSS message */ + C3CN_ABORT_RPL_PENDING, /* expecting an abort reply */ + C3CN_TX_DATA_SENT, /* already sent a TX_DATA WR */ + C3CN_ACTIVE_CLOSE_NEEDED, /* need to be closed */ +}; + +/** + * cxgb3i_sdev_data - Per adapter data. + * Linked off of each Ethernet device port on the adapter. + * Also available via the t3cdev structure since we have pointers to our port + * net_device's there ... + * + * @list: list head to link elements + * @cdev: t3cdev adapter + * @client: CPL client pointer + * @ports: array of adapter ports + * @sport_map_next: next index into the port map + * @sport_map: source port map + */ +struct cxgb3i_sdev_data { + struct list_head list; + struct t3cdev *cdev; + struct cxgb3_client *client; + struct adap_ports ports; + unsigned int sport_map_next; + unsigned long sport_map[0]; +}; +#define NDEV2CDATA(ndev) (*(struct cxgb3i_sdev_data **)&(ndev)->ec_ptr) +#define CXGB3_SDEV_DATA(cdev) NDEV2CDATA((cdev)->lldev) + +void cxgb3i_sdev_cleanup(void); +int cxgb3i_sdev_init(cxgb3_cpl_handler_func *); +void cxgb3i_sdev_add(struct t3cdev *, struct cxgb3_client *); +void cxgb3i_sdev_remove(struct t3cdev *); + +struct s3_conn *cxgb3i_c3cn_create(void); +int cxgb3i_c3cn_connect(struct s3_conn *, struct sockaddr_in *); +void cxgb3i_c3cn_rx_credits(struct s3_conn *, int); +int cxgb3i_c3cn_send_pdus(struct s3_conn *, struct sk_buff *); +void cxgb3i_c3cn_release(struct s3_conn *); + +/** + * cxgb3_skb_cb - control block for received pdu state and ULP mode management. + * + * @flag: see C3CB_FLAG_* below + * @ulp_mode: ULP mode/submode of sk_buff + * @seq: tcp sequence number + * @ddigest: pdu data digest + * @pdulen: recovered pdu length + * @ulp_data: scratch area for ULP + */ +struct cxgb3_skb_cb { + __u8 flags; + __u8 ulp_mode; + __u32 seq; + __u32 ddigest; + __u32 pdulen; + __u8 ulp_data[16]; +}; + +#define CXGB3_SKB_CB(skb) ((struct cxgb3_skb_cb *)&((skb)->cb[0])) + +#define skb_ulp_mode(skb) (CXGB3_SKB_CB(skb)->ulp_mode) +#define skb_ulp_ddigest(skb) (CXGB3_SKB_CB(skb)->ddigest) +#define skb_ulp_pdulen(skb) (CXGB3_SKB_CB(skb)->pdulen) +#define skb_ulp_data(skb) (CXGB3_SKB_CB(skb)->ulp_data) + +enum c3cb_flags { + C3CB_FLAG_NEED_HDR = 1 << 0, /* packet needs a TX_DATA_WR header */ + C3CB_FLAG_NO_APPEND = 1 << 1, /* don't grow this skb */ + C3CB_FLAG_COMPL = 1 << 2, /* request WR completion */ +}; + +/** + * sge_opaque_hdr - + * Opaque version of structure the SGE stores at skb->head of TX_DATA packets + * and for which we must reserve space. + */ +struct sge_opaque_hdr { + void *dev; + dma_addr_t addr[MAX_SKB_FRAGS + 1]; +}; + +/* for TX: a skb must have a headroom of at least TX_HEADER_LEN bytes */ +#define TX_HEADER_LEN \ + (sizeof(struct tx_data_wr) + sizeof(struct sge_opaque_hdr)) + +/* + * get and set private ip for iscsi traffic + */ +#define cxgb3i_get_private_ipv4addr(ndev) \ + (((struct port_info *)(netdev_priv(ndev)))->iscsi_ipv4addr) +#define cxgb3i_set_private_ipv4addr(ndev, addr) \ + (((struct port_info *)(netdev_priv(ndev)))->iscsi_ipv4addr) = addr + +/* max. connections per adapter */ +#define CXGB3I_MAX_CONN 16384 +#endif /* _CXGB3_OFFLOAD_H */ diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c new file mode 100644 index 000000000000..ce7ce8c6094c --- /dev/null +++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c @@ -0,0 +1,402 @@ +/* + * cxgb3i_pdu.c: Chelsio S3xx iSCSI driver. + * + * Copyright (c) 2008 Chelsio Communications, Inc. + * Copyright (c) 2008 Mike Christie + * Copyright (c) 2008 Red Hat, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Karen Xie (kxie@chelsio.com) + */ + +#include +#include +#include +#include + +#include "cxgb3i.h" +#include "cxgb3i_pdu.h" + +#ifdef __DEBUG_CXGB3I_RX__ +#define cxgb3i_rx_debug cxgb3i_log_debug +#else +#define cxgb3i_rx_debug(fmt...) +#endif + +#ifdef __DEBUG_CXGB3I_TX__ +#define cxgb3i_tx_debug cxgb3i_log_debug +#else +#define cxgb3i_tx_debug(fmt...) +#endif + +static struct page *pad_page; + +/* + * pdu receive, interact with libiscsi_tcp + */ +static inline int read_pdu_skb(struct iscsi_conn *conn, struct sk_buff *skb, + unsigned int offset, int offloaded) +{ + int status = 0; + int bytes_read; + + bytes_read = iscsi_tcp_recv_skb(conn, skb, offset, offloaded, &status); + switch (status) { + case ISCSI_TCP_CONN_ERR: + return -EIO; + case ISCSI_TCP_SUSPENDED: + /* no transfer - just have caller flush queue */ + return bytes_read; + case ISCSI_TCP_SKB_DONE: + /* + * pdus should always fit in the skb and we should get + * segment done notifcation. + */ + iscsi_conn_printk(KERN_ERR, conn, "Invalid pdu or skb."); + return -EFAULT; + case ISCSI_TCP_SEGMENT_DONE: + return bytes_read; + default: + iscsi_conn_printk(KERN_ERR, conn, "Invalid iscsi_tcp_recv_skb " + "status %d\n", status); + return -EINVAL; + } +} + +static int cxgb3i_conn_read_pdu_skb(struct iscsi_conn *conn, + struct sk_buff *skb) +{ + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + bool offloaded = 0; + unsigned int offset; + int rc; + + cxgb3i_rx_debug("conn 0x%p, skb 0x%p, len %u, flag 0x%x.\n", + conn, skb, skb->len, skb_ulp_mode(skb)); + + if (!iscsi_tcp_recv_segment_is_hdr(tcp_conn)) { + iscsi_conn_failure(conn, ISCSI_ERR_PROTO); + return -EIO; + } + + if (conn->hdrdgst_en && (skb_ulp_mode(skb) & ULP2_FLAG_HCRC_ERROR)) { + iscsi_conn_failure(conn, ISCSI_ERR_HDR_DGST); + return -EIO; + } + + if (conn->datadgst_en && (skb_ulp_mode(skb) & ULP2_FLAG_DCRC_ERROR)) { + iscsi_conn_failure(conn, ISCSI_ERR_DATA_DGST); + return -EIO; + } + + /* iscsi hdr */ + rc = read_pdu_skb(conn, skb, 0, 0); + if (rc <= 0) + return rc; + + if (iscsi_tcp_recv_segment_is_hdr(tcp_conn)) + return 0; + + offset = rc; + if (conn->hdrdgst_en) + offset += ISCSI_DIGEST_SIZE; + + /* iscsi data */ + if (skb_ulp_mode(skb) & ULP2_FLAG_DATA_DDPED) { + cxgb3i_rx_debug("skb 0x%p, opcode 0x%x, data %u, ddp'ed, " + "itt 0x%x.\n", + skb, + tcp_conn->in.hdr->opcode & ISCSI_OPCODE_MASK, + tcp_conn->in.datalen, + ntohl(tcp_conn->in.hdr->itt)); + offloaded = 1; + } else { + cxgb3i_rx_debug("skb 0x%p, opcode 0x%x, data %u, NOT ddp'ed, " + "itt 0x%x.\n", + skb, + tcp_conn->in.hdr->opcode & ISCSI_OPCODE_MASK, + tcp_conn->in.datalen, + ntohl(tcp_conn->in.hdr->itt)); + offset += sizeof(struct cpl_iscsi_hdr_norss); + } + + rc = read_pdu_skb(conn, skb, offset, offloaded); + if (rc < 0) + return rc; + else + return 0; +} + +/* + * pdu transmit, interact with libiscsi_tcp + */ +static inline void tx_skb_setmode(struct sk_buff *skb, int hcrc, int dcrc) +{ + u8 submode = 0; + + if (hcrc) + submode |= 1; + if (dcrc) + submode |= 2; + skb_ulp_mode(skb) = (ULP_MODE_ISCSI << 4) | submode; +} + +void cxgb3i_conn_cleanup_task(struct iscsi_task *task) +{ + struct iscsi_tcp_task *tcp_task = task->dd_data; + + /* never reached the xmit task callout */ + if (tcp_task->dd_data) + kfree_skb(tcp_task->dd_data); + tcp_task->dd_data = NULL; + + /* MNC - Do we need a check in case this is called but + * cxgb3i_conn_alloc_pdu has never been called on the task */ + cxgb3i_release_itt(task, task->hdr_itt); + iscsi_tcp_cleanup_task(task); +} + +/* + * We do not support ahs yet + */ +int cxgb3i_conn_alloc_pdu(struct iscsi_task *task, u8 opcode) +{ + struct iscsi_tcp_task *tcp_task = task->dd_data; + struct sk_buff *skb; + + task->hdr = NULL; + /* always allocate rooms for AHS */ + skb = alloc_skb(sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE + + TX_HEADER_LEN, GFP_ATOMIC); + if (!skb) + return -ENOMEM; + + cxgb3i_tx_debug("task 0x%p, opcode 0x%x, skb 0x%p.\n", + task, opcode, skb); + + tcp_task->dd_data = skb; + skb_reserve(skb, TX_HEADER_LEN); + task->hdr = (struct iscsi_hdr *)skb->data; + task->hdr_max = sizeof(struct iscsi_hdr); + + /* data_out uses scsi_cmd's itt */ + if (opcode != ISCSI_OP_SCSI_DATA_OUT) + cxgb3i_reserve_itt(task, &task->hdr->itt); + + return 0; +} + +int cxgb3i_conn_init_pdu(struct iscsi_task *task, unsigned int offset, + unsigned int count) +{ + struct iscsi_tcp_task *tcp_task = task->dd_data; + struct sk_buff *skb = tcp_task->dd_data; + struct iscsi_conn *conn = task->conn; + struct page *pg; + unsigned int datalen = count; + int i, padlen = iscsi_padding(count); + skb_frag_t *frag; + + cxgb3i_tx_debug("task 0x%p,0x%p, offset %u, count %u, skb 0x%p.\n", + task, task->sc, offset, count, skb); + + skb_put(skb, task->hdr_len); + tx_skb_setmode(skb, conn->hdrdgst_en, datalen ? conn->datadgst_en : 0); + if (!count) + return 0; + + if (task->sc) { + struct scatterlist *sg; + struct scsi_data_buffer *sdb; + unsigned int sgoffset = offset; + struct page *sgpg; + unsigned int sglen; + + sdb = scsi_out(task->sc); + sg = sdb->table.sgl; + + for_each_sg(sdb->table.sgl, sg, sdb->table.nents, i) { + cxgb3i_tx_debug("sg %d, page 0x%p, len %u offset %u\n", + i, sg_page(sg), sg->length, sg->offset); + + if (sgoffset < sg->length) + break; + sgoffset -= sg->length; + } + sgpg = sg_page(sg); + sglen = sg->length - sgoffset; + + do { + int j = skb_shinfo(skb)->nr_frags; + unsigned int copy; + + if (!sglen) { + sg = sg_next(sg); + sgpg = sg_page(sg); + sgoffset = 0; + sglen = sg->length; + ++i; + } + copy = min(sglen, datalen); + if (j && skb_can_coalesce(skb, j, sgpg, + sg->offset + sgoffset)) { + skb_shinfo(skb)->frags[j - 1].size += copy; + } else { + get_page(sgpg); + skb_fill_page_desc(skb, j, sgpg, + sg->offset + sgoffset, copy); + } + sgoffset += copy; + sglen -= copy; + datalen -= copy; + } while (datalen); + } else { + pg = virt_to_page(task->data); + + while (datalen) { + i = skb_shinfo(skb)->nr_frags; + frag = &skb_shinfo(skb)->frags[i]; + + get_page(pg); + frag->page = pg; + frag->page_offset = 0; + frag->size = min((unsigned int)PAGE_SIZE, datalen); + + skb_shinfo(skb)->nr_frags++; + datalen -= frag->size; + pg++; + } + } + + if (padlen) { + i = skb_shinfo(skb)->nr_frags; + frag = &skb_shinfo(skb)->frags[i]; + frag->page = pad_page; + frag->page_offset = 0; + frag->size = padlen; + skb_shinfo(skb)->nr_frags++; + } + + datalen = count + padlen; + skb->data_len += datalen; + skb->truesize += datalen; + skb->len += datalen; + return 0; +} + +int cxgb3i_conn_xmit_pdu(struct iscsi_task *task) +{ + struct iscsi_tcp_task *tcp_task = task->dd_data; + struct sk_buff *skb = tcp_task->dd_data; + struct iscsi_tcp_conn *tcp_conn = task->conn->dd_data; + struct cxgb3i_conn *cconn = tcp_conn->dd_data; + unsigned int datalen; + int err; + + if (!skb) + return 0; + + datalen = skb->data_len; + tcp_task->dd_data = NULL; + err = cxgb3i_c3cn_send_pdus(cconn->cep->c3cn, skb); + cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n", + task, skb, skb->len, skb->data_len, err); + if (err > 0) { + int pdulen = err; + + if (task->conn->hdrdgst_en) + pdulen += ISCSI_DIGEST_SIZE; + if (datalen && task->conn->datadgst_en) + pdulen += ISCSI_DIGEST_SIZE; + + task->conn->txdata_octets += pdulen; + return 0; + } + + if (err < 0 && err != -EAGAIN) { + kfree_skb(skb); + cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n", + task->itt, skb, skb->len, skb->data_len, err); + iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err); + iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED); + return err; + } + /* reset skb to send when we are called again */ + tcp_task->dd_data = skb; + return -EAGAIN; +} + +int cxgb3i_pdu_init(void) +{ + pad_page = alloc_page(GFP_KERNEL); + if (!pad_page) + return -ENOMEM; + memset(page_address(pad_page), 0, PAGE_SIZE); + return 0; +} + +void cxgb3i_pdu_cleanup(void) +{ + if (pad_page) { + __free_page(pad_page); + pad_page = NULL; + } +} + +void cxgb3i_conn_pdu_ready(struct s3_conn *c3cn) +{ + struct sk_buff *skb; + unsigned int read = 0; + struct iscsi_conn *conn = c3cn->user_data; + int err = 0; + + cxgb3i_rx_debug("cn 0x%p.\n", c3cn); + + read_lock(&c3cn->callback_lock); + if (unlikely(!conn || conn->suspend_rx)) { + cxgb3i_rx_debug("conn 0x%p, id %d, suspend_rx %lu!\n", + conn, conn ? conn->id : 0xFF, + conn ? conn->suspend_rx : 0xFF); + read_unlock(&c3cn->callback_lock); + return; + } + skb = skb_peek(&c3cn->receive_queue); + while (!err && skb) { + __skb_unlink(skb, &c3cn->receive_queue); + read += skb_ulp_pdulen(skb); + err = cxgb3i_conn_read_pdu_skb(conn, skb); + __kfree_skb(skb); + skb = skb_peek(&c3cn->receive_queue); + } + read_unlock(&c3cn->callback_lock); + if (c3cn) { + c3cn->copied_seq += read; + cxgb3i_c3cn_rx_credits(c3cn, read); + } + conn->rxdata_octets += read; +} + +void cxgb3i_conn_tx_open(struct s3_conn *c3cn) +{ + struct iscsi_conn *conn = c3cn->user_data; + + cxgb3i_tx_debug("cn 0x%p.\n", c3cn); + if (conn) { + cxgb3i_tx_debug("cn 0x%p, cid %d.\n", c3cn, conn->id); + scsi_queue_work(conn->session->host, &conn->xmitwork); + } +} + +void cxgb3i_conn_closing(struct s3_conn *c3cn) +{ + struct iscsi_conn *conn; + + read_lock(&c3cn->callback_lock); + conn = c3cn->user_data; + if (conn && c3cn->state != C3CN_STATE_ESTABLISHED) + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + read_unlock(&c3cn->callback_lock); +} diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.h b/drivers/scsi/cxgb3i/cxgb3i_pdu.h new file mode 100644 index 000000000000..a3f685cc2362 --- /dev/null +++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.h @@ -0,0 +1,59 @@ +/* + * cxgb3i_ulp2.h: Chelsio S3xx iSCSI driver. + * + * Copyright (c) 2008 Chelsio Communications, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Karen Xie (kxie@chelsio.com) + */ + +#ifndef __CXGB3I_ULP2_PDU_H__ +#define __CXGB3I_ULP2_PDU_H__ + +struct cpl_iscsi_hdr_norss { + union opcode_tid ot; + u16 pdu_len_ddp; + u16 len; + u32 seq; + u16 urg; + u8 rsvd; + u8 status; +}; + +struct cpl_rx_data_ddp_norss { + union opcode_tid ot; + u16 urg; + u16 len; + u32 seq; + u32 nxt_seq; + u32 ulp_crc; + u32 ddp_status; +}; + +#define RX_DDP_STATUS_IPP_SHIFT 27 /* invalid pagepod */ +#define RX_DDP_STATUS_TID_SHIFT 26 /* tid mismatch */ +#define RX_DDP_STATUS_COLOR_SHIFT 25 /* color mismatch */ +#define RX_DDP_STATUS_OFFSET_SHIFT 24 /* offset mismatch */ +#define RX_DDP_STATUS_ULIMIT_SHIFT 23 /* ulimit error */ +#define RX_DDP_STATUS_TAG_SHIFT 22 /* tag mismatch */ +#define RX_DDP_STATUS_DCRC_SHIFT 21 /* dcrc error */ +#define RX_DDP_STATUS_HCRC_SHIFT 20 /* hcrc error */ +#define RX_DDP_STATUS_PAD_SHIFT 19 /* pad error */ +#define RX_DDP_STATUS_PPP_SHIFT 18 /* pagepod parity error */ +#define RX_DDP_STATUS_LLIMIT_SHIFT 17 /* llimit error */ +#define RX_DDP_STATUS_DDP_SHIFT 16 /* ddp'able */ +#define RX_DDP_STATUS_PMM_SHIFT 15 /* pagepod mismatch */ + +#define ULP2_FLAG_DATA_READY 0x1 +#define ULP2_FLAG_DATA_DDPED 0x2 +#define ULP2_FLAG_HCRC_ERROR 0x10 +#define ULP2_FLAG_DCRC_ERROR 0x20 +#define ULP2_FLAG_PAD_ERROR 0x40 + +void cxgb3i_conn_closing(struct s3_conn *); +void cxgb3i_conn_pdu_ready(struct s3_conn *c3cn); +void cxgb3i_conn_tx_open(struct s3_conn *c3cn); +#endif -- cgit v1.2.3 From be42c4c433c2c0d3f1583c08908fead00d36d222 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Mon, 1 Dec 2008 14:34:58 -0800 Subject: correct wrong function name of d_put in kernel document and source comment no function named d_put(), it should be dput(). Impact: fix document and comment, no functionality changed Signed-off-by: Zhao Lei Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Al Viro --- Documentation/filesystems/vfs.txt | 2 +- fs/dcache.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 5579bda58a6d..041cb771d505 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -931,7 +931,7 @@ manipulate dentries: d_lookup: look up a dentry given its parent and path name component It looks up the child of that given name from the dcache hash table. If it is found, the reference count is incremented - and the dentry is returned. The caller must use d_put() + and the dentry is returned. The caller must use dput() to free the dentry when it finishes using it. For further information on dentry locking, please refer to the document diff --git a/fs/dcache.c b/fs/dcache.c index eeafc14c2a14..c231a639c2a2 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1332,7 +1332,7 @@ err_out: * * Searches the children of the parent dentry for the name in question. If * the dentry is found its reference count is incremented and the dentry - * is returned. The caller must use d_put to free the entry when it has + * is returned. The caller must use dput to free the entry when it has * finished using it. %NULL is returned on failure. * * __d_lookup is dcache_lock free. The hash list is protected using RCU. -- cgit v1.2.3 From fd659fd6275d3426d7967da1f0e3638bbbd2fedb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 10 Dec 2008 09:35:45 -0800 Subject: fix f_count description in Documentation/filesystems/files.txt Documentation/filesystems/files.txt was not updated when f_count became an atomic_long_t. atomic_long_inc_not_zero() is now used instead of atomic_inc_not_zero() Signed-off-by: Al Viro --- Documentation/filesystems/files.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/files.txt b/Documentation/filesystems/files.txt index bb0142f61084..ac2facc50d2a 100644 --- a/Documentation/filesystems/files.txt +++ b/Documentation/filesystems/files.txt @@ -76,13 +76,13 @@ the fdtable structure - 5. Handling of the file structures is special. Since the look-up of the fd (fget()/fget_light()) are lock-free, it is possible that look-up may race with the last put() operation on the - file structure. This is avoided using atomic_inc_not_zero() + file structure. This is avoided using atomic_long_inc_not_zero() on ->f_count : rcu_read_lock(); file = fcheck_files(files, fd); if (file) { - if (atomic_inc_not_zero(&file->f_count)) + if (atomic_long_inc_not_zero(&file->f_count)) *fput_needed = 1; else /* Didn't get the reference, someone's freed */ @@ -92,7 +92,7 @@ the fdtable structure - .... return file; - atomic_inc_not_zero() detects if refcounts is already zero or + atomic_long_inc_not_zero() detects if refcounts is already zero or goes to zero during increment. If it does, we fail fget()/fget_light(). -- cgit v1.2.3 From 6badd79bd002788aaec27b50a74ab69ef65ab8ee Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 26 Dec 2008 00:57:40 -0500 Subject: kill ->dir_notify() Remove the hopelessly misguided ->dir_notify(). The only instance (cifs) has been broken by design from the very beginning; the objects it creates are never destroyed, keep references to struct file they can outlive, nothing that could possibly evict them exists on close(2) path *and* no locking whatsoever is done to prevent races with close(), should the previous, er, deficiencies someday be dealt with. Signed-off-by: Al Viro --- Documentation/filesystems/Locking | 2 - Documentation/filesystems/vfs.txt | 3 - fs/bad_inode.c | 6 -- fs/cifs/Makefile | 2 +- fs/cifs/cifsfs.c | 7 --- fs/cifs/cifsfs.h | 1 - fs/cifs/fcntl.c | 118 -------------------------------------- fs/dnotify.c | 3 - include/linux/fs.h | 1 - 9 files changed, 1 insertion(+), 142 deletions(-) delete mode 100644 fs/cifs/fcntl.c (limited to 'Documentation') diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 23d2f4460deb..ccec55394380 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -394,7 +394,6 @@ prototypes: unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); int (*check_flags)(int); - int (*dir_notify)(struct file *, unsigned long); }; locking rules: @@ -424,7 +423,6 @@ sendfile: no sendpage: no get_unmapped_area: no check_flags: no -dir_notify: no ->llseek() locking has moved from llseek to the individual llseek implementations. If your fs is not using generic_file_llseek, you diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 041cb771d505..ef19afa186a9 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -733,7 +733,6 @@ struct file_operations { ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); int (*check_flags)(int); - int (*dir_notify)(struct file *filp, unsigned long arg); int (*flock) (struct file *, int, struct file_lock *); ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, size_t, unsigned int); ssize_t (*splice_read)(struct file *, struct pipe_inode_info *, size_t, unsigned int); @@ -800,8 +799,6 @@ otherwise noted. check_flags: called by the fcntl(2) system call for F_SETFL command - dir_notify: called by the fcntl(2) system call for F_NOTIFY command - flock: called by the flock(2) system call splice_write: called by the VFS to splice data from a pipe to a file. This diff --git a/fs/bad_inode.c b/fs/bad_inode.c index 5f1538c03b1b..a05287a23f62 100644 --- a/fs/bad_inode.c +++ b/fs/bad_inode.c @@ -132,11 +132,6 @@ static int bad_file_check_flags(int flags) return -EIO; } -static int bad_file_dir_notify(struct file *file, unsigned long arg) -{ - return -EIO; -} - static int bad_file_flock(struct file *filp, int cmd, struct file_lock *fl) { return -EIO; @@ -179,7 +174,6 @@ static const struct file_operations bad_file_ops = .sendpage = bad_file_sendpage, .get_unmapped_area = bad_file_get_unmapped_area, .check_flags = bad_file_check_flags, - .dir_notify = bad_file_dir_notify, .flock = bad_file_flock, .splice_write = bad_file_splice_write, .splice_read = bad_file_splice_read, diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile index 6ba43fb346fb..9948c0030e86 100644 --- a/fs/cifs/Makefile +++ b/fs/cifs/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_CIFS) += cifs.o cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \ link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o \ - md4.o md5.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o fcntl.o \ + md4.o md5.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o \ readdir.o ioctl.o sess.o export.o cifsacl.o cifs-$(CONFIG_CIFS_UPCALL) += cifs_spnego.o diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 0005a194a75c..13ea53251dcf 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -747,7 +747,6 @@ const struct file_operations cifs_file_ops = { #endif /* CONFIG_CIFS_POSIX */ #ifdef CONFIG_CIFS_EXPERIMENTAL - .dir_notify = cifs_dir_notify, .setlease = cifs_setlease, #endif /* CONFIG_CIFS_EXPERIMENTAL */ }; @@ -768,7 +767,6 @@ const struct file_operations cifs_file_direct_ops = { #endif /* CONFIG_CIFS_POSIX */ .llseek = cifs_llseek, #ifdef CONFIG_CIFS_EXPERIMENTAL - .dir_notify = cifs_dir_notify, .setlease = cifs_setlease, #endif /* CONFIG_CIFS_EXPERIMENTAL */ }; @@ -789,7 +787,6 @@ const struct file_operations cifs_file_nobrl_ops = { #endif /* CONFIG_CIFS_POSIX */ #ifdef CONFIG_CIFS_EXPERIMENTAL - .dir_notify = cifs_dir_notify, .setlease = cifs_setlease, #endif /* CONFIG_CIFS_EXPERIMENTAL */ }; @@ -809,7 +806,6 @@ const struct file_operations cifs_file_direct_nobrl_ops = { #endif /* CONFIG_CIFS_POSIX */ .llseek = cifs_llseek, #ifdef CONFIG_CIFS_EXPERIMENTAL - .dir_notify = cifs_dir_notify, .setlease = cifs_setlease, #endif /* CONFIG_CIFS_EXPERIMENTAL */ }; @@ -818,9 +814,6 @@ const struct file_operations cifs_dir_ops = { .readdir = cifs_readdir, .release = cifs_closedir, .read = generic_read_dir, -#ifdef CONFIG_CIFS_EXPERIMENTAL - .dir_notify = cifs_dir_notify, -#endif /* CONFIG_CIFS_EXPERIMENTAL */ .unlocked_ioctl = cifs_ioctl, .llseek = generic_file_llseek, }; diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index 2ce04c73d74e..7ac481841f87 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -76,7 +76,6 @@ extern int cifs_file_mmap(struct file * , struct vm_area_struct *); extern const struct file_operations cifs_dir_ops; extern int cifs_dir_open(struct inode *inode, struct file *file); extern int cifs_readdir(struct file *file, void *direntry, filldir_t filldir); -extern int cifs_dir_notify(struct file *, unsigned long arg); /* Functions related to dir entries */ extern struct dentry_operations cifs_dentry_ops; diff --git a/fs/cifs/fcntl.c b/fs/cifs/fcntl.c deleted file mode 100644 index 5a57581eb4b2..000000000000 --- a/fs/cifs/fcntl.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * fs/cifs/fcntl.c - * - * vfs operations that deal with the file control API - * - * Copyright (C) International Business Machines Corp., 2003,2004 - * Author(s): Steve French (sfrench@us.ibm.com) - * - * This library is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as published - * by the Free Software Foundation; either version 2.1 of the License, or - * (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - * the GNU Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this library; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include "cifsglob.h" -#include "cifsproto.h" -#include "cifs_unicode.h" -#include "cifs_debug.h" -#include "cifsfs.h" - -static __u32 convert_to_cifs_notify_flags(unsigned long fcntl_notify_flags) -{ - __u32 cifs_ntfy_flags = 0; - - /* No way on Linux VFS to ask to monitor xattr - changes (and no stream support either */ - if (fcntl_notify_flags & DN_ACCESS) - cifs_ntfy_flags |= FILE_NOTIFY_CHANGE_LAST_ACCESS; - if (fcntl_notify_flags & DN_MODIFY) { - /* What does this mean on directories? */ - cifs_ntfy_flags |= FILE_NOTIFY_CHANGE_LAST_WRITE | - FILE_NOTIFY_CHANGE_SIZE; - } - if (fcntl_notify_flags & DN_CREATE) { - cifs_ntfy_flags |= FILE_NOTIFY_CHANGE_CREATION | - FILE_NOTIFY_CHANGE_LAST_WRITE; - } - if (fcntl_notify_flags & DN_DELETE) - cifs_ntfy_flags |= FILE_NOTIFY_CHANGE_LAST_WRITE; - if (fcntl_notify_flags & DN_RENAME) { - /* BB review this - checking various server behaviors */ - cifs_ntfy_flags |= FILE_NOTIFY_CHANGE_DIR_NAME | - FILE_NOTIFY_CHANGE_FILE_NAME; - } - if (fcntl_notify_flags & DN_ATTRIB) { - cifs_ntfy_flags |= FILE_NOTIFY_CHANGE_SECURITY | - FILE_NOTIFY_CHANGE_ATTRIBUTES; - } -/* if (fcntl_notify_flags & DN_MULTISHOT) { - cifs_ntfy_flags |= ; - } */ /* BB fixme - not sure how to handle this with CIFS yet */ - - return cifs_ntfy_flags; -} - -int cifs_dir_notify(struct file *file, unsigned long arg) -{ - int xid; - int rc = -EINVAL; - int oplock = 0; - struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *pTcon; - char *full_path = NULL; - __u32 filter = FILE_NOTIFY_CHANGE_NAME | FILE_NOTIFY_CHANGE_ATTRIBUTES; - __u16 netfid; - - if (experimEnabled == 0) - return 0; - - xid = GetXid(); - cifs_sb = CIFS_SB(file->f_path.dentry->d_sb); - pTcon = cifs_sb->tcon; - - full_path = build_path_from_dentry(file->f_path.dentry); - - if (full_path == NULL) { - rc = -ENOMEM; - } else { - cFYI(1, ("dir notify on file %s Arg 0x%lx", full_path, arg)); - rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, - GENERIC_READ | SYNCHRONIZE, 0 /* create options */, - &netfid, &oplock, NULL, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); - /* BB fixme - add this handle to a notify handle list */ - if (rc) { - cFYI(1, ("Could not open directory for notify")); - } else { - filter = convert_to_cifs_notify_flags(arg); - if (filter != 0) { - rc = CIFSSMBNotify(xid, pTcon, - 0 /* no subdirs */, netfid, - filter, file, arg & DN_MULTISHOT, - cifs_sb->local_nls); - } else { - rc = -EINVAL; - } - /* BB add code to close file eventually (at unmount - it would close automatically but may be a way - to do it easily when inode freed or when - notify info is cleared/changed */ - cFYI(1, ("notify rc %d", rc)); - } - } - - FreeXid(xid); - return rc; -} diff --git a/fs/dnotify.c b/fs/dnotify.c index 676073b8dda5..b0aa2cde80bd 100644 --- a/fs/dnotify.c +++ b/fs/dnotify.c @@ -115,9 +115,6 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg) dn->dn_next = inode->i_dnotify; inode->i_dnotify = dn; spin_unlock(&inode->i_lock); - - if (filp->f_op && filp->f_op->dir_notify) - return filp->f_op->dir_notify(filp, arg); return 0; out_free: diff --git a/include/linux/fs.h b/include/linux/fs.h index fd615986a41c..be16ce01fb1b 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1309,7 +1309,6 @@ struct file_operations { ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); int (*check_flags)(int); - int (*dir_notify)(struct file *filp, unsigned long arg); int (*flock) (struct file *, int, struct file_lock *); ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int); ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int); -- cgit v1.2.3