From d8a3c488c6d393eaac4418b5fc4d57c36310a92b Mon Sep 17 00:00:00 2001 From: Jeff LaBundy Date: Sun, 16 Feb 2020 17:32:05 -0600 Subject: dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625 This patch adds device tree bindings for the Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors. A total of three bindings are presented (one MFD and two child nodes); they are submitted as a single patch because the child node bindings have no meaning in the absence of the MFD binding. Signed-off-by: Jeff LaBundy Reviewed-by: Rob Herring Signed-off-by: Lee Jones --- .../devicetree/bindings/input/iqs62x-keys.yaml | 132 +++++++++++++++ Documentation/devicetree/bindings/mfd/iqs62x.yaml | 179 +++++++++++++++++++++ .../devicetree/bindings/pwm/iqs620a-pwm.yaml | 32 ++++ 3 files changed, 343 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/iqs62x-keys.yaml create mode 100644 Documentation/devicetree/bindings/mfd/iqs62x.yaml create mode 100644 Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml new file mode 100644 index 000000000000..5625c222903a --- /dev/null +++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/iqs62x-keys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS620A/621/622/624/625 Keys and Switches + +maintainers: + - Jeff LaBundy + +description: | + The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors + feature a variety of self-capacitive, mutual-inductive and Hall-effect sens- + ing capabilities that can facilitate a variety of contactless key and switch + applications. + + These functions are collectively represented by a "keys" child node from the + parent MFD driver. See Documentation/devicetree/bindings/mfd/iqs62x.yaml for + further details and examples. Sensor hardware configuration (self-capacitive + vs. mutual-inductive, etc.) is selected based on the device's firmware. + +properties: + compatible: + enum: + - azoteq,iqs620a-keys + - azoteq,iqs621-keys + - azoteq,iqs622-keys + - azoteq,iqs624-keys + - azoteq,iqs625-keys + + linux,keycodes: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 16 + description: | + Specifies the numeric keycodes associated with each available touch or + proximity event according to the following table. An 'x' indicates the + event is supported for a given device. Specify 0 for unused events. + + ------------------------------------------------------------------------- + | # | Event | IQS620A | IQS621 | IQS622 | IQS624 | IQS625 | + ------------------------------------------------------------------------- + | 0 | CH0 Touch | x | x | x | x | x | + | | Antenna 1 Touch* | x | | | | | + ------------------------------------------------------------------------- + | 1 | CH0 Proximity | x | x | x | x | x | + | | Antenna 1 Prox.* | x | | | | | + ------------------------------------------------------------------------- + | 2 | CH1 Touch | x | x | x | x | x | + | | Ant. 1 Deep Touch* | x | | | | | + ------------------------------------------------------------------------- + | 3 | CH1 Proximity | x | x | x | x | x | + ------------------------------------------------------------------------- + | 4 | CH2 Touch | x | | | | | + ------------------------------------------------------------------------- + | 5 | CH2 Proximity | x | | | | | + | | Antenna 2 Prox.* | x | | | | | + ------------------------------------------------------------------------- + | 6 | Metal (+) Touch** | x | x | | | | + | | Ant. 2 Deep Touch* | x | | | | | + ------------------------------------------------------------------------- + | 7 | Metal (+) Prox.** | x | x | | | | + | | Antenna 2 Touch* | x | | | | | + ------------------------------------------------------------------------- + | 8 | Metal (-) Touch** | x | x | | | | + ------------------------------------------------------------------------- + | 9 | Metal (-) Prox.** | x | x | | | | + ------------------------------------------------------------------------- + | 10 | SAR Active*** | x | | x | | | + ------------------------------------------------------------------------- + | 11 | SAR Quick Rel.*** | x | | x | | | + ------------------------------------------------------------------------- + | 12 | SAR Movement*** | x | | x | | | + ------------------------------------------------------------------------- + | 13 | SAR Filter Halt*** | x | | x | | | + ------------------------------------------------------------------------- + | 14 | Wheel Up | | | | x | | + ------------------------------------------------------------------------- + | 15 | Wheel Down | | | | x | | + ------------------------------------------------------------------------- + * Two-channel SAR. Replaces CH0-2 plus metal touch and proximity events + if enabled via firmware. + ** "+" and "-" refer to the polarity of a channel's delta (LTA - counts), + where "LTA" is defined as the channel's long-term average. + *** One-channel SAR. Replaces CH0-2 touch and proximity events if enabled + via firmware. + +patternProperties: + "^hall-switch-(north|south)$": + type: object + description: + Represents north/south-field Hall-effect sensor touch or proximity + events. Note that north/south-field orientation is reversed on the + IQS620AXzCSR device due to its flip-chip package. + + properties: + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Numeric switch code associated with the event. + + azoteq,use-prox: + $ref: /schemas/types.yaml#/definitions/flag + description: + If present, specifies that Hall-effect sensor reporting should + use the device's wide-range proximity threshold instead of its + close-range touch threshold (default). + + required: + - linux,code + + additionalProperties: false + +if: + properties: + compatible: + contains: + enum: + - azoteq,iqs624-keys + - azoteq,iqs625-keys +then: + patternProperties: + "^hall-switch-(north|south)$": false + +required: + - compatible + - linux,keycodes + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml new file mode 100644 index 000000000000..541b06d80e73 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/iqs62x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS620A/621/622/624/625 Multi-Function Sensors + +maintainers: + - Jeff LaBundy + +description: | + The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors + integrate multiple sensing technologies in a single package. + + Link to datasheets: https://www.azoteq.com/ + +properties: + compatible: + enum: + - azoteq,iqs620a + - azoteq,iqs621 + - azoteq,iqs622 + - azoteq,iqs624 + - azoteq,iqs625 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: + Specifies the name of the calibration and configuration file selected by + the driver. If this property is omitted, the name is chosen based on the + device name with ".bin" as the extension (e.g. iqs620a.bin for IQS620A). + + keys: + $ref: ../input/iqs62x-keys.yaml + + pwm: + $ref: ../pwm/iqs620a-pwm.yaml + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + /* + * Dual capacitive buttons with proximity-activated function, unipolar lid + * switch and panel-mounted LED. + */ + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + iqs620a@44 { + compatible = "azoteq,iqs620a"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + keys { + compatible = "azoteq,iqs620a-keys"; + + linux,keycodes = , + , + , + ; + + hall-switch-south { + linux,code = ; + azoteq,use-prox; + }; + }; + + iqs620a_pwm: pwm { + compatible = "azoteq,iqs620a-pwm"; + #pwm-cells = <2>; + }; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + panel { + pwms = <&iqs620a_pwm 0 1000000>; + max-brightness = <255>; + }; + }; + + - | + /* Single inductive button with bipolar dock/tablet-mode switch. */ + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + iqs620a@44 { + compatible = "azoteq,iqs620a"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + firmware-name = "iqs620a_coil.bin"; + + keys { + compatible = "azoteq,iqs620a-keys"; + + linux,keycodes = <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + ; + + hall-switch-north { + linux,code = ; + }; + + hall-switch-south { + linux,code = ; + }; + }; + }; + }; + + - | + /* Dual capacitive buttons with volume knob. */ + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + iqs624@44 { + compatible = "azoteq,iqs624"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + keys { + compatible = "azoteq,iqs624-keys"; + + linux,keycodes = , + <0>, + , + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + , + ; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml new file mode 100644 index 000000000000..1d7c27be50da --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/iqs620a-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS620A PWM Generator + +maintainers: + - Jeff LaBundy + +description: | + The Azoteq IQS620A multi-function sensor generates a fixed-frequency PWM + output represented by a "pwm" child node from the parent MFD driver. See + Documentation/devicetree/bindings/mfd/iqs62x.yaml for further details as + well as an example. + +properties: + compatible: + enum: + - azoteq,iqs620a-pwm + + "#pwm-cells": + const: 2 + +required: + - compatible + - "#pwm-cells" + +additionalProperties: false + +... -- cgit v1.2.3 From 361dca7d97f5ef8d0f3f8036bb33626a67817867 Mon Sep 17 00:00:00 2001 From: Andreas Kemnade Date: Fri, 20 Mar 2020 09:10:59 +0100 Subject: dt-bindings: mfd: rn5t618: Document optional property interrupts These chips use interrupts for various things like RTC alarm. Signed-off-by: Andreas Kemnade Acked-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/rn5t618.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt index b74e5e94d1cb..16778ea00dbc 100644 --- a/Documentation/devicetree/bindings/mfd/rn5t618.txt +++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt @@ -15,6 +15,8 @@ Required properties: - reg: the I2C slave address of the device Optional properties: + - interrupts: interrupt mapping for IRQ + See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - system-power-controller: See Documentation/devicetree/bindings/power/power-controller.txt @@ -32,6 +34,8 @@ Example: pmic@32 { compatible = "ricoh,rn5t618"; reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; system-power-controller; regulators { -- cgit v1.2.3 From ba5836933a71160c40356dfbd493135a7134b069 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Mon, 17 Feb 2020 14:45:44 +0100 Subject: dt-bindings: mfd: Document STM32 low power timer bindings Add a subnode to STM low power timer bindings to support timer driver Signed-off-by: Benjamin Gaignard Acked-by: Rob Herring Signed-off-by: Lee Jones --- .../devicetree/bindings/mfd/st,stm32-lptimer.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml index 1a4cc5f3fb33..ddf190cb800b 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml @@ -39,6 +39,8 @@ properties: "#size-cells": const: 0 + wakeup-source: true + pwm: type: object @@ -81,6 +83,16 @@ patternProperties: required: - compatible + timer: + type: object + + properties: + compatible: + const: st,stm32-lptimer-timer + + required: + - compatible + required: - "#address-cells" - "#size-cells" @@ -115,6 +127,10 @@ examples: counter { compatible = "st,stm32-lptimer-counter"; }; + + timer { + compatible = "st,stm32-lptimer-timer"; + }; }; ... -- cgit v1.2.3 From a045f3578e0c14edced021a8d38887008bc000b1 Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Fri, 20 Mar 2020 11:42:33 +0200 Subject: dt-bindings: bd718x7: Yamlify and add BD71850 Convert ROHM bd71837 and bd71847 PMIC binding text docs to yaml. Split the binding document to two separate documents (own documents for BD71837 and BD71847) as they have different amount of regulators. This way we can better enforce the node name check for regulators. ROHM is also providing BD71850 - which is almost identical to BD71847 - main difference is some initial regulator states. The BD71850 can be driven by same driver and it has same buck/LDO setup as BD71847 - add it to BD71847 binding document and introduce compatible for it. Signed-off-by: Matti Vaittinen Reviewed-by: Rob Herring Acked-by: Mark Brown Signed-off-by: Lee Jones --- .../devicetree/bindings/mfd/rohm,bd71837-pmic.txt | 90 -------- .../devicetree/bindings/mfd/rohm,bd71837-pmic.yaml | 236 +++++++++++++++++++++ .../devicetree/bindings/mfd/rohm,bd71847-pmic.yaml | 222 +++++++++++++++++++ .../bindings/regulator/rohm,bd71837-regulator.txt | 162 -------------- .../bindings/regulator/rohm,bd71837-regulator.yaml | 103 +++++++++ .../bindings/regulator/rohm,bd71847-regulator.yaml | 97 +++++++++ 6 files changed, 658 insertions(+), 252 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt deleted file mode 100644 index f22d74c7a8db..000000000000 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt +++ /dev/null @@ -1,90 +0,0 @@ -* ROHM BD71837 and BD71847 Power Management Integrated Circuit bindings - -BD71837MWV and BD71847MWV are programmable Power Management ICs for powering -single-core, dual-core, and quad-core SoCs such as NXP-i.MX 8M. They are -optimized for low BOM cost and compact solution footprint. BD71837MWV -integrates 8 Buck regulators and 7 LDOs. BD71847MWV contains 6 Buck regulators -and 6 LDOs. - -Datasheet for BD71837 is available at: -https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e -Datasheet for BD71847 is available at: -https://www.rohm.com/datasheet/BD71847AMWV/bd71847amwv-e - -Required properties: - - compatible : Should be "rohm,bd71837" for bd71837 - "rohm,bd71847" for bd71847. - - reg : I2C slave address. - - interrupt-parent : Phandle to the parent interrupt controller. - - interrupts : The interrupt line the device is connected to. - - clocks : The parent clock connected to PMIC. If this is missing - 32768 KHz clock is assumed. - - #clock-cells : Should be 0. - - regulators: : List of child nodes that specify the regulators. - Please see ../regulator/rohm,bd71837-regulator.txt - -Optional properties: -- clock-output-names : Should contain name for output clock. -- rohm,reset-snvs-powered : Transfer BD718x7 to SNVS state at reset. - -The BD718x7 supports two different HW states as reset target states. States -are called as SNVS and READY. At READY state all the PMIC power outputs go -down and OTP is reload. At the SNVS state all other logic and external -devices apart from the SNVS power domain are shut off. Please refer to NXP -i.MX8 documentation for further information regarding SNVS state. When a -reset is done via SNVS state the PMIC OTP data is not reload. This causes -power outputs that have been under SW control to stay down when reset has -switched power state to SNVS. If reset is done via READY state the power -outputs will be returned to HW control by OTP loading. Thus the reset -target state is set to READY by default. If SNVS state is used the boot -crucial regulators must have the regulator-always-on and regulator-boot-on -properties set in regulator node. - -- rohm,short-press-ms : Short press duration in milliseconds -- rohm,long-press-ms : Long press duration in milliseconds - -Configure the "short press" and "long press" timers for the power button. -Values are rounded to what hardware supports (500ms multiple for short and -1000ms multiple for long). If these properties are not present the existing -configuration (from bootloader or OTP) is not touched. - -Example: - - /* external oscillator node */ - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <1>; - clock-frequency = <32768>; - clock-output-names = "osc"; - }; - - pmic: pmic@4b { - compatible = "rohm,bd71837"; - reg = <0x4b>; - interrupt-parent = <&gpio1>; - interrupts = <29 GPIO_ACTIVE_LOW>; - interrupt-names = "irq"; - #clock-cells = <0>; - clocks = <&osc 0>; - clock-output-names = "bd71837-32k-out"; - rohm,reset-snvs-powered; - - regulators { - buck1: BUCK1 { - regulator-name = "buck1"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1300000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <1250>; - }; - // [...] - }; - }; - - /* Clock consumer node */ - rtc@0 { - compatible = "company,my-rtc"; - clock-names = "my-clock"; - clocks = <&pmic>; - }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml new file mode 100644 index 000000000000..aa922c560fcc --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml @@ -0,0 +1,236 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71837 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen + +description: | + BD71837MWV is programmable Power Management ICs for powering single-core, + dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is optimized for low + BOM cost and compact solution footprint. BD71837MWV integrates 8 Buck + regulators and 7 LDOs. + Datasheet for BD71837 is available at + https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71837amwv-product + +properties: + compatible: + const: rohm,bd71837 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + +# The BD718x7 supports two different HW states as reset target states. States +# are called as SNVS and READY. At READY state all the PMIC power outputs go +# down and OTP is reload. At the SNVS state all other logic and external +# devices apart from the SNVS power domain are shut off. Please refer to NXP +# i.MX8 documentation for further information regarding SNVS state. When a +# reset is done via SNVS state the PMIC OTP data is not reload. This causes +# power outputs that have been under SW control to stay down when reset has +# switched power state to SNVS. If reset is done via READY state the power +# outputs will be returned to HW control by OTP loading. Thus the reset +# target state is set to READY by default. If SNVS state is used the boot +# crucial regulators must have the regulator-always-on and regulator-boot-on +# properties set in regulator node. + + rohm,reset-snvs-powered: + description: | + Transfer PMIC to SNVS state at reset + type: boolean + +# Configure the "short press" and "long press" timers for the power button. +# Values are rounded to what hardware supports +# Short-press: +# Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s +# Long-press: +# Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s +# If these properties are not present the existing configuration (from +# bootloader or OTP) is not touched. + + rohm,short-press-ms: + description: + Short press duration in milliseconds + enum: + - 10 + - 500 + - 1000 + - 1500 + - 2000 + - 2500 + - 3000 + - 3500 + - 4000 + - 4500 + - 5000 + - 5500 + - 6000 + - 6500 + - 7000 + + rohm,long-press-ms: + description: + Long press duration in milliseconds + enum: + - 10 + - 1000 + - 2000 + - 3000 + - 4000 + - 5000 + - 6000 + - 7000 + - 8000 + - 9000 + - 10000 + - 11000 + - 12000 + - 13000 + - 14000 + + regulators: + $ref: ../regulator/rohm,bd71837-regulator.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + pmic: pmic@4b { + compatible = "rohm,bd71837"; + reg = <0x4b>; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clocks = <&osc 0>; + rohm,reset-snvs-powered; + rohm,short-press-ms = <10>; + rohm,long-press-ms = <2000>; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; + }; + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; + }; + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + }; + buck6: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + buck7: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + }; + buck8: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + }; + + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + }; + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + }; + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + }; + ldo7_reg: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml new file mode 100644 index 000000000000..402e40dfe0b8 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml @@ -0,0 +1,222 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71847-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71847 and BD71850 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen + +description: | + BD71847AMWV and BD71850MWV are programmable Power Management ICs for powering + single-core, dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is + optimized for low BOM cost and compact solution footprint. BD71847MWV and + BD71850MWV integrate 6 Buck regulators and 6 LDOs. + Datasheets are available at + https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71847amwv-product + https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71850mwv-product + +properties: + compatible: + enum: + - rohm,bd71847 + - rohm,bd71850 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + +# The BD71847 abd BD71850 support two different HW states as reset target +# states. States are called as SNVS and READY. At READY state all the PMIC +# power outputs go down and OTP is reload. At the SNVS state all other logic +# and external devices apart from the SNVS power domain are shut off. Please +# refer to NXP i.MX8 documentation for further information regarding SNVS +# state. When a reset is done via SNVS state the PMIC OTP data is not reload. +# This causes power outputs that have been under SW control to stay down when +# reset has switched power state to SNVS. If reset is done via READY state the +# power outputs will be returned to HW control by OTP loading. Thus the reset +# target state is set to READY by default. If SNVS state is used the boot +# crucial regulators must have the regulator-always-on and regulator-boot-on +# properties set in regulator node. + + rohm,reset-snvs-powered: + description: + Transfer PMIC to SNVS state at reset. + type: boolean + +# Configure the "short press" and "long press" timers for the power button. +# Values are rounded to what hardware supports +# Short-press: +# Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s +# Long-press: +# Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s +# If these properties are not present the existing # configuration (from +# bootloader or OTP) is not touched. + + rohm,short-press-ms: + description: + Short press duration in milliseconds + enum: + - 10 + - 500 + - 1000 + - 1500 + - 2000 + - 2500 + - 3000 + - 3500 + - 4000 + - 4500 + - 5000 + - 5500 + - 6000 + - 6500 + - 7000 + - 7500 + + rohm,long-press-ms: + description: + Long press duration in milliseconds + enum: + - 10 + - 1000 + - 2000 + - 3000 + - 4000 + - 5000 + - 6000 + - 7000 + - 8000 + - 9000 + - 10000 + - 11000 + - 12000 + - 13000 + - 14000 + - 15000 + + regulators: + $ref: ../regulator/rohm,bd71847-regulator.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + pmic: pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clocks = <&osc 0>; + rohm,reset-snvs-powered; + rohm,short-press-ms = <10>; + rohm,long-press-ms = <2000>; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + }; + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + }; + buck8: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + }; + + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + }; + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + }; + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt deleted file mode 100644 index cbce62c22b60..000000000000 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt +++ /dev/null @@ -1,162 +0,0 @@ -ROHM BD71837 and BD71847 Power Management Integrated Circuit regulator bindings - -Required properties: - - regulator-name: should be "buck1", ..., "buck8" and "ldo1", ..., "ldo7" for - BD71837. For BD71847 names should be "buck1", ..., "buck6" - and "ldo1", ..., "ldo6" - -List of regulators provided by this controller. BD71837 regulators node -should be sub node of the BD71837 MFD node. See BD71837 MFD bindings at -Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt -Regulator nodes should be named to BUCK_ and LDO_. The -definition for each of these nodes is defined using the standard -binding for regulators at -Documentation/devicetree/bindings/regulator/regulator.txt. -Note that if BD71837 starts at RUN state you probably want to use -regulator-boot-on at least for BUCK6 and BUCK7 so that those are not -disabled by driver at startup. LDO5 and LDO6 are supplied by those and -if they are disabled at startup the voltage monitoring for LDO5/LDO6 will -cause PMIC to reset. - -The valid names for BD71837 regulator nodes are: -BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8 -LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7 - -The valid names for BD71847 regulator nodes are: -BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6 -LDO1, LDO2, LDO3, LDO4, LDO5, LDO6 - -Optional properties: -- rohm,dvs-run-voltage : PMIC default "RUN" state voltage in uV. - See below table for bucks which support this. -- rohm,dvs-idle-voltage : PMIC default "IDLE" state voltage in uV. - See below table for bucks which support this. -- rohm,dvs-suspend-voltage : PMIC default "SUSPEND" state voltage in uV. - See below table for bucks which support this. -- Any optional property defined in bindings/regulator/regulator.txt - -Supported default DVS states: - -BD71837: -buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage ------------------------------------------------------------------------------ -1 | supported | supported | supported ----------------------------------------------------------------------------- -2 | supported | supported | not supported ----------------------------------------------------------------------------- -3 | supported | not supported | not supported ----------------------------------------------------------------------------- -4 | supported | not supported | not supported ----------------------------------------------------------------------------- -rest | not supported | not supported | not supported - -BD71847: -buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage ------------------------------------------------------------------------------ -1 | supported | supported | supported ----------------------------------------------------------------------------- -2 | supported | supported | not supported ----------------------------------------------------------------------------- -rest | not supported | not supported | not supported - -Example: -regulators { - buck1: BUCK1 { - regulator-name = "buck1"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1300000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <1250>; - rohm,dvs-run-voltage = <900000>; - rohm,dvs-idle-voltage = <850000>; - rohm,dvs-suspend-voltage = <800000>; - }; - buck2: BUCK2 { - regulator-name = "buck2"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1300000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <1250>; - rohm,dvs-run-voltage = <1000000>; - rohm,dvs-idle-voltage = <900000>; - }; - buck3: BUCK3 { - regulator-name = "buck3"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1300000>; - regulator-boot-on; - rohm,dvs-run-voltage = <1000000>; - }; - buck4: BUCK4 { - regulator-name = "buck4"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1300000>; - regulator-boot-on; - rohm,dvs-run-voltage = <1000000>; - }; - buck5: BUCK5 { - regulator-name = "buck5"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1350000>; - regulator-boot-on; - }; - buck6: BUCK6 { - regulator-name = "buck6"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - buck7: BUCK7 { - regulator-name = "buck7"; - regulator-min-microvolt = <1605000>; - regulator-max-microvolt = <1995000>; - regulator-boot-on; - }; - buck8: BUCK8 { - regulator-name = "buck8"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - }; - - ldo1: LDO1 { - regulator-name = "ldo1"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - ldo2: LDO2 { - regulator-name = "ldo2"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-boot-on; - }; - ldo3: LDO3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - ldo4: LDO4 { - regulator-name = "ldo4"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1800000>; - }; - ldo5: LDO5 { - regulator-name = "ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - ldo6: LDO6 { - regulator-name = "ldo6"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1800000>; - }; - ldo7_reg: LDO7 { - regulator-name = "ldo7"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; -}; - - diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml new file mode 100644 index 000000000000..a323b1696eee --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd71837-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71837 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen + +description: | + List of regulators provided by this controller. BD71837 regulators node + should be sub node of the BD71837 MFD node. See BD71837 MFD bindings at + Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml + Regulator nodes should be named to BUCK_ and LDO_. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Note that if BD71837 starts at RUN state you probably want to use + regulator-boot-on at least for BUCK6 and BUCK7 so that those are not + disabled by driver at startup. LDO5 and LDO6 are supplied by those and + if they are disabled at startup the voltage monitoring for LDO5/LDO6 will + cause PMIC to reset. + +#The valid names for BD71837 regulator nodes are: +#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8 +#LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7 + +patternProperties: + "^LDO[1-7]$": + type: object + allOf: + - $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + properties: + regulator-name: + pattern: "^ldo[1-7]$" + description: + should be "ldo1", ..., "ldo7" + + "^BUCK[1-8]$": + type: object + allOf: + - $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + regulator-name: + pattern: "^buck[1-8]$" + description: + should be "buck1", ..., "buck8" + + rohm,dvs-run-voltage: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 1300000 + description: + PMIC default "RUN" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + rohm,dvs-idle-voltage: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 1300000 + description: + PMIC default "IDLE" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + rohm,dvs-suspend-voltage: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 1300000 + description: + PMIC default "SUSPEND" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + # Supported default DVS states: + # + # BD71837: + # buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage + # ---------------------------------------------------------------- + # 1 | supported | supported | supported + # ---------------------------------------------------------------- + # 2 | supported | supported | not supported + # ---------------------------------------------------------------- + # 3 | supported | not supported | not supported + # ---------------------------------------------------------------- + # 4 | supported | not supported | not supported + # ---------------------------------------------------------------- + # rest | not supported | not supported | not supported + + + required: + - regulator-name + additionalProperties: false +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml new file mode 100644 index 000000000000..526fd00bcb16 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd71847-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71847 and BD71850 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen + +description: | + List of regulators provided by this controller. BD71847 regulators node + should be sub node of the BD71847 MFD node. See BD71847 MFD bindings at + Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml + Regulator nodes should be named to BUCK_ and LDO_. The + definition for each of these nodes is defined using the standard + binding for regulators at + Documentation/devicetree/bindings/regulator/regulator.txt. + Note that if BD71847 starts at RUN state you probably want to use + regulator-boot-on at least for BUCK5. LDO6 is supplied by it and it must + not be disabled by driver at startup. If BUCK5 is disabled at startup the + voltage monitoring for LDO5/LDO6 can cause PMIC to reset. + +#The valid names for BD71847 regulator nodes are: +#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6 +#LDO1, LDO2, LDO3, LDO4, LDO5, LDO6 + +patternProperties: + "^LDO[1-6]$": + type: object + allOf: + - $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + properties: + regulator-name: + pattern: "^ldo[1-6]$" + description: + should be "ldo1", ..., "ldo6" + + "^BUCK[1-6]$": + type: object + allOf: + - $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + properties: + regulator-name: + pattern: "^buck[1-6]$" + description: + should be "buck1", ..., "buck6" + + rohm,dvs-run-voltage: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 1300000 + description: + PMIC default "RUN" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + rohm,dvs-idle-voltage: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 1300000 + description: + PMIC default "IDLE" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + rohm,dvs-suspend-voltage: + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + maximum: 1300000 + description: + PMIC default "SUSPEND" state voltage in uV. See below table for + bucks which support this. 0 means disabled. + + # Supported default DVS states: + # + # BD71847: + # buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage + # ---------------------------------------------------------------- + # 1 | supported | supported | supported + # ---------------------------------------------------------------- + # 2 | supported | supported | not supported + # ---------------------------------------------------------------- + # rest | not supported | not supported | not supported + + required: + - regulator-name + additionalProperties: false +additionalProperties: false -- cgit v1.2.3