From d2a3e0931a8f3b95b910096d022ffd98adbd075c Mon Sep 17 00:00:00 2001 From: Martin Kepplinger Date: Thu, 15 Oct 2015 15:10:32 +0200 Subject: iio: mma8452: support either of the available interrupt pins This change is important in order for everyone to be easily able to use the driver for one of the supported accelerometer chips! Until now, the driver blindly assumed that the INT1 interrupt line is wired on a user's board. But these devices have 2 interrupt lines and can route their interrupt sources to one of them. Now, if "INT2" is found and matches i2c_client->irq, INT2 will be used. The chip's default actually is INT2, which is why probably many boards will have it wired and can make use of this. Of course, this also falls back to assuming INT1, so for existing users nothing will break. The new functionality is described in the bindings doc. Signed-off-by: Martin Kepplinger For the binding: Acked-by: Rob Herring Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/accel/mma8452.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt index e3c37467d7da..3c10e8581144 100644 --- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt @@ -7,13 +7,18 @@ Required properties: * "fsl,mma8453" * "fsl,mma8652" * "fsl,mma8653" + - reg: the I2C address of the chip Optional properties: - interrupt-parent: should be the phandle for the interrupt controller + - interrupts: interrupt mapping for GPIO IRQ + - interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's + interrupt line in use. + Example: mma8453fc@1d { @@ -21,4 +26,5 @@ Example: reg = <0x1d>; interrupt-parent = <&gpio1>; interrupts = <5 0>; + interrupt-names = "INT2"; }; -- cgit v1.2.3 From f0b1643581b376ebd97a0068cbc3d146d6abdff1 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Fri, 16 Oct 2015 14:53:39 +0200 Subject: iio:adc:palmas: add DT support Code was found at: https://android.googlesource.com/kernel/tegra/+/a90856a6626d502d42c6e7abccbdf9d730b36270%5E%21/#F1 Signed-off-by: Laxman Dewangan Signed-off-by: Marek Belisko [Fixed minor typos + add channels list to documentation] Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/iio/adc/palmas-gpadc.txt | 48 ++++++++++++++++++++ drivers/iio/adc/palmas_gpadc.c | 52 +++++++++++++++++++--- 2 files changed, 95 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt new file mode 100644 index 000000000000..4bb9a86065d1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt @@ -0,0 +1,48 @@ +* Palmas general purpose ADC IP block devicetree bindings + +Channels list: + 0 battery type + 1 battery temp NTC (optional current source) + 2 GP + 3 temp (with ext. diode, optional current source) + 4 GP + 5 GP + 6 VBAT_SENSE + 7 VCC_SENSE + 8 Backup Battery voltage + 9 external charger (VCHG) + 10 VBUS + 11 DC-DC current probe (how does this work?) + 12 internal die temp + 13 internal die temp + 14 USB ID pin voltage + 15 test network + +Required properties: +- compatible : Must be "ti,palmas-gpadc". +- #io-channel-cells: Should be set to <1>. + +Optional sub-nodes: +ti,channel0-current-microamp: Channel 0 current in uA. + Values are rounded to derive 0uA, 5uA, 15uA, 20uA. +ti,channel3-current-microamp: Channel 3 current in uA. + Values are rounded to derive 0uA, 10uA, 400uA, 800uA. +ti,enable-extended-delay: Enable extended delay. + +Example: + +pmic { + compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; + ... + gpadc { + compatible = "ti,palmas-gpadc"; + interrupts = <18 0 + 16 0 + 17 0>; + #io-channel-cells = <1>; + ti,channel0-current-microamp = <5>; + ti,channel3-current-microamp = <10>; + }; + }; + ... +}; diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c index 71763c5da2ab..f42eb8a7d21f 100644 --- a/drivers/iio/adc/palmas_gpadc.c +++ b/drivers/iio/adc/palmas_gpadc.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #include #include #include @@ -460,6 +462,34 @@ static const struct iio_chan_spec palmas_gpadc_iio_channel[] = { PALMAS_ADC_CHAN_IIO(IN15, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), }; +static int palmas_gpadc_get_adc_dt_data(struct platform_device *pdev, + struct palmas_gpadc_platform_data **gpadc_pdata) +{ + struct device_node *np = pdev->dev.of_node; + struct palmas_gpadc_platform_data *gp_data; + int ret; + u32 pval; + + gp_data = devm_kzalloc(&pdev->dev, sizeof(*gp_data), GFP_KERNEL); + if (!gp_data) + return -ENOMEM; + + ret = of_property_read_u32(np, "ti,channel0-current-microamp", &pval); + if (!ret) + gp_data->ch0_current = pval; + + ret = of_property_read_u32(np, "ti,channel3-current-microamp", &pval); + if (!ret) + gp_data->ch3_current = pval; + + gp_data->extended_delay = of_property_read_bool(np, + "ti,enable-extended-delay"); + + *gpadc_pdata = gp_data; + + return 0; +} + static int palmas_gpadc_probe(struct platform_device *pdev) { struct palmas_gpadc *adc; @@ -469,12 +499,17 @@ static int palmas_gpadc_probe(struct platform_device *pdev) int ret, i; pdata = dev_get_platdata(pdev->dev.parent); - if (!pdata || !pdata->gpadc_pdata) { - dev_err(&pdev->dev, "No platform data\n"); - return -ENODEV; - } - gpadc_pdata = pdata->gpadc_pdata; + if (pdata && pdata->gpadc_pdata) + gpadc_pdata = pdata->gpadc_pdata; + + if (!gpadc_pdata && pdev->dev.of_node) { + ret = palmas_gpadc_get_adc_dt_data(pdev, &gpadc_pdata); + if (ret < 0) + return ret; + } + if (!gpadc_pdata) + return -EINVAL; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc)); if (!indio_dev) { @@ -790,12 +825,19 @@ static const struct dev_pm_ops palmas_pm_ops = { palmas_gpadc_resume) }; +static const struct of_device_id of_palmas_gpadc_match_tbl[] = { + { .compatible = "ti,palmas-gpadc", }, + { /* end */ } +}; +MODULE_DEVICE_TABLE(of, of_palmas_gpadc_match_tbl); + static struct platform_driver palmas_gpadc_driver = { .probe = palmas_gpadc_probe, .remove = palmas_gpadc_remove, .driver = { .name = MOD_NAME, .pm = &palmas_pm_ops, + .of_match_table = of_palmas_gpadc_match_tbl, }, }; -- cgit v1.2.3 From 3a872138e4b78e7f8bfce63f0da788c0cfd80e53 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 14 Oct 2015 14:54:38 +0200 Subject: iio: adc: mcp320x: Deprecated compatible strings with no vendor prefix The Microchip Analog to Digital Converter (ADC) Device Tree binding documents compatible strings with no vendor prefix. Since it should compatible strings with also a vendor, add these to the binding doc and mark the old ones as deprecated. The driver says that the device is from Microchip Technology which is listed in Documentation/devicetree/bindings/vendor-prefixes.txt so use the documented prefix. Signed-off-by: Javier Martinez Canillas Acked-by: Michael Welling Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/iio/adc/mcp320x.txt | 30 +++++++++++++++------- 1 file changed, 21 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt index 2a1f3af30155..bcd3ac8e6e0c 100644 --- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt +++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt @@ -10,16 +10,28 @@ must be specified. Required properties: - compatible: Must be one of the following, depending on the model: - "mcp3001" - "mcp3002" - "mcp3004" - "mcp3008" - "mcp3201" - "mcp3202" - "mcp3204" - "mcp3208" - "mcp3301" + "mcp3001" (DEPRECATED) + "mcp3002" (DEPRECATED) + "mcp3004" (DEPRECATED) + "mcp3008" (DEPRECATED) + "mcp3201" (DEPRECATED) + "mcp3202" (DEPRECATED) + "mcp3204" (DEPRECATED) + "mcp3208" (DEPRECATED) + "mcp3301" (DEPRECATED) + "microchip,mcp3001" + "microchip,mcp3002" + "microchip,mcp3004" + "microchip,mcp3008" + "microchip,mcp3201" + "microchip,mcp3202" + "microchip,mcp3204" + "microchip,mcp3208" + "microchip,mcp3301" + + NOTE: The use of the compatibles with no vendor prefix + is deprecated and only listed because old DT use them. Examples: spi_controller { -- cgit v1.2.3 From 89a41cbba6610b48e793ce6ac5bd46031c7531cc Mon Sep 17 00:00:00 2001 From: Michal Suchanek Date: Fri, 30 Oct 2015 13:34:00 -0700 Subject: mtd: ofpart: document the lock flag. The lock flag of ofpart is undocumented. Add to binding doc. Signed-off-by: Michal Suchanek Cc: Sascha Hauer Acked-by: Rob Herring Signed-off-by: Brian Norris --- Documentation/devicetree/bindings/mtd/partition.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt index f1e2a02381a4..8dc4bf9dc8e5 100644 --- a/Documentation/devicetree/bindings/mtd/partition.txt +++ b/Documentation/devicetree/bindings/mtd/partition.txt @@ -30,6 +30,8 @@ Optional properties: partition should only be mounted read-only. This is usually used for flash partitions containing early-boot firmware images or data which should not be clobbered. +- lock : Do not unlock the partition at initialization time (not supported on + all devices) Examples: -- cgit v1.2.3 From bf9c37cb627a3f690e246d9326a4a94913771bbf Mon Sep 17 00:00:00 2001 From: Bayi Cheng Date: Fri, 6 Nov 2015 23:48:07 +0800 Subject: doc: dt: mtd: add documentation for Mediatek spi-nor controller Add device tree binding documentation for serial flash with Mediatek serial flash controller Signed-off-by: Bayi Cheng Acked-by: Rob Herring [Brian: fixed up language] Signed-off-by: Brian Norris --- .../devicetree/bindings/mtd/mtk-quadspi.txt | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/mtk-quadspi.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt new file mode 100644 index 000000000000..fb314f09861b --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt @@ -0,0 +1,41 @@ +* Serial NOR flash controller for MTK MT81xx (and similar) + +Required properties: +- compatible: should be "mediatek,mt8173-nor"; +- reg: physical base address and length of the controller's register +- clocks: the phandle of the clocks needed by the nor controller +- clock-names: the names of the clocks + the clocks should be named "spi" and "sf". "spi" is used for spi bus, + and "sf" is used for controller, these are the clocks witch + hardware needs to enabling nor flash and nor flash controller. + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- #address-cells: should be <1> +- #size-cells: should be <0> + +The SPI flash must be a child of the nor_flash node and must have a +compatible property. Also see jedec,spi-nor.txt. + +Required properties: +- compatible: May include a device-specific string consisting of the manufacturer + and name of the chip. Must also include "jedec,spi-nor" for any + SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F). +- reg : Chip-Select number + +Example: + +nor_flash: spi@1100d000 { + compatible = "mediatek,mt8173-nor"; + reg = <0 0x1100d000 0 0xe0>; + clocks = <&pericfg CLK_PERI_SPI>, + <&topckgen CLK_TOP_SPINFI_IFR_SEL>; + clock-names = "spi", "sf"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + -- cgit v1.2.3 From 34dc578d99449a83dcb0f5ef4444215590183af4 Mon Sep 17 00:00:00 2001 From: Giuseppe Barba Date: Thu, 12 Nov 2015 08:36:49 +0100 Subject: iio: st-accel: add support for lis2dh12 This commit add support for STMicroelectronics lis2dh12 accelerometer. Datasheet for this device can be found here: http://www.st.com/st-web-ui/static/active/en/resource/technical/ document/datasheet/DM00091513.pdf Signed-off-by: Giuseppe Barba Acked-by: Denis Ciocca Acked-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/st-sensors.txt | 1 + drivers/iio/accel/Kconfig | 2 +- drivers/iio/accel/st_accel.h | 1 + drivers/iio/accel/st_accel_core.c | 1 + drivers/iio/accel/st_accel_i2c.c | 5 +++++ drivers/iio/accel/st_accel_spi.c | 1 + 6 files changed, 10 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index d3ccdb190c53..d4b87cc1e446 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -36,6 +36,7 @@ Accelerometers: - st,lsm303dlm-accel - st,lsm330-accel - st,lsm303agr-accel +- st,lis2dh12-accel Gyroscopes: - st,l3g4200d-gyro diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 87487d377f9b..edc29b173f6c 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -64,7 +64,7 @@ config IIO_ST_ACCEL_3AXIS help Say yes here to build support for STMicroelectronics accelerometers: LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, - LIS331DLH, LSM303DL, LSM303DLM, LSM330. + LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12. This driver can also be built as a module. If so, these modules will be created: diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h index 468f21fa2950..5d4a1897b293 100644 --- a/drivers/iio/accel/st_accel.h +++ b/drivers/iio/accel/st_accel.h @@ -27,6 +27,7 @@ #define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel" #define LSM330_ACCEL_DEV_NAME "lsm330_accel" #define LSM303AGR_ACCEL_DEV_NAME "lsm303agr_accel" +#define LIS2DH12_ACCEL_DEV_NAME "lis2dh12_accel" /** * struct st_sensors_platform_data - default accel platform data diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index dab8b76c1427..9d973f1e74ac 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -234,6 +234,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { [3] = LSM330DL_ACCEL_DEV_NAME, [4] = LSM330DLC_ACCEL_DEV_NAME, [5] = LSM303AGR_ACCEL_DEV_NAME, + [6] = LIS2DH12_ACCEL_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_accel_12bit_channels, .odr = { diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c index 8b9cc84fd44f..294a32f89367 100644 --- a/drivers/iio/accel/st_accel_i2c.c +++ b/drivers/iio/accel/st_accel_i2c.c @@ -72,6 +72,10 @@ static const struct of_device_id st_accel_of_match[] = { .compatible = "st,lsm303agr-accel", .data = LSM303AGR_ACCEL_DEV_NAME, }, + { + .compatible = "st,lis2dh12-accel", + .data = LIS2DH12_ACCEL_DEV_NAME, + }, {}, }; MODULE_DEVICE_TABLE(of, st_accel_of_match); @@ -121,6 +125,7 @@ static const struct i2c_device_id st_accel_id_table[] = { { LSM303DLM_ACCEL_DEV_NAME }, { LSM330_ACCEL_DEV_NAME }, { LSM303AGR_ACCEL_DEV_NAME }, + { LIS2DH12_ACCEL_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(i2c, st_accel_id_table); diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c index 54b61a3961c3..e82bedfaeb9b 100644 --- a/drivers/iio/accel/st_accel_spi.c +++ b/drivers/iio/accel/st_accel_spi.c @@ -58,6 +58,7 @@ static const struct spi_device_id st_accel_id_table[] = { { LSM303DLM_ACCEL_DEV_NAME }, { LSM330_ACCEL_DEV_NAME }, { LSM303AGR_ACCEL_DEV_NAME }, + { LIS2DH12_ACCEL_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(spi, st_accel_id_table); -- cgit v1.2.3 From a1513641892b220bc5b7ce63e44b81658702cdae Mon Sep 17 00:00:00 2001 From: Sean Nyekjaer Date: Mon, 9 Nov 2015 13:53:00 +0100 Subject: iio: ti-ads8688: Add DT binding documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adding binding documentation for Texas Instruments ADS8688 ADC. Signed-off-by: Sean Nyekjaer Reviewed-by: Martin Hundebøll Acked-by: Rob Herring Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/iio/adc/ti-ads8688.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt new file mode 100644 index 000000000000..a02337d7efa4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads8688.txt @@ -0,0 +1,20 @@ +* Texas Instruments' ADS8684 and ADS8688 ADC chip + +Required properties: + - compatible: Should be "ti,ads8684" or "ti,ads8688" + - reg: spi chip select number for the device + +Recommended properties: + - spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: + - vref-supply: The regulator supply for ADC reference voltage + +Example: +adc@0 { + compatible = "ti,ads8688"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <1000000>; +}; -- cgit v1.2.3 From b36f09c3c441a6e59eab9315032e7d546571de3f Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 20 Oct 2015 11:46:28 +0200 Subject: dmaengine: Add transfer termination synchronization support The DMAengine API has a long standing race condition that is inherent to the API itself. Calling dmaengine_terminate_all() is supposed to stop and abort any pending or active transfers that have previously been submitted. Unfortunately it is possible that this operation races against a currently running (or with some drivers also scheduled) completion callback. Since the API allows dmaengine_terminate_all() to be called from atomic context as well as from within a completion callback it is not possible to synchronize to the execution of the completion callback from within dmaengine_terminate_all() itself. This means that a user of the DMAengine API does not know when it is safe to free resources used in the completion callback, which can result in a use-after-free race condition. This patch addresses the issue by introducing an explicit synchronization primitive to the DMAengine API called dmaengine_synchronize(). The existing dmaengine_terminate_all() is deprecated in favor of dmaengine_terminate_sync() and dmaengine_terminate_async(). The former aborts all pending and active transfers and synchronizes to the current context, meaning it will wait until all running completion callbacks have finished. This means it is only possible to call this function from non-atomic context. The later function does not synchronize, but can still be used in atomic context or from within a complete callback. It has to be followed up by dmaengine_synchronize() before a client can free the resources used in a completion callback. In addition to this the semantics of the device_terminate_all() callback are slightly relaxed by this patch. It is now OK for a driver to only schedule the termination of the active transfer, but does not necessarily have to wait until the DMA controller has completely stopped. The driver must ensure though that the controller has stopped and no longer accesses any memory when the device_synchronize() callback returns. This was in part done since most drivers do not pay attention to this anyway at the moment and to emphasize that this needs to be done when the device_synchronize() callback is implemented. But it also helps with implementing support for devices where stopping the controller can require operations that may sleep. Signed-off-by: Lars-Peter Clausen Signed-off-by: Vinod Koul --- Documentation/dmaengine/client.txt | 38 ++++++++++++++- Documentation/dmaengine/provider.txt | 20 +++++++- drivers/dma/dmaengine.c | 5 +- include/linux/dmaengine.h | 90 ++++++++++++++++++++++++++++++++++++ 4 files changed, 148 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/dmaengine/client.txt b/Documentation/dmaengine/client.txt index 11fb87ff6cd0..d9f9f461102a 100644 --- a/Documentation/dmaengine/client.txt +++ b/Documentation/dmaengine/client.txt @@ -128,7 +128,7 @@ The slave DMA usage consists of following steps: transaction. For cyclic DMA, a callback function may wish to terminate the - DMA via dmaengine_terminate_all(). + DMA via dmaengine_terminate_async(). Therefore, it is important that DMA engine drivers drop any locks before calling the callback function which may cause a @@ -166,12 +166,29 @@ The slave DMA usage consists of following steps: Further APIs: -1. int dmaengine_terminate_all(struct dma_chan *chan) +1. int dmaengine_terminate_sync(struct dma_chan *chan) + int dmaengine_terminate_async(struct dma_chan *chan) + int dmaengine_terminate_all(struct dma_chan *chan) /* DEPRECATED */ This causes all activity for the DMA channel to be stopped, and may discard data in the DMA FIFO which hasn't been fully transferred. No callback functions will be called for any incomplete transfers. + Two variants of this function are available. + + dmaengine_terminate_async() might not wait until the DMA has been fully + stopped or until any running complete callbacks have finished. But it is + possible to call dmaengine_terminate_async() from atomic context or from + within a complete callback. dmaengine_synchronize() must be called before it + is safe to free the memory accessed by the DMA transfer or free resources + accessed from within the complete callback. + + dmaengine_terminate_sync() will wait for the transfer and any running + complete callbacks to finish before it returns. But the function must not be + called from atomic context or from within a complete callback. + + dmaengine_terminate_all() is deprecated and should not be used in new code. + 2. int dmaengine_pause(struct dma_chan *chan) This pauses activity on the DMA channel without data loss. @@ -197,3 +214,20 @@ Further APIs: a running DMA channel. It is recommended that DMA engine users pause or stop (via dmaengine_terminate_all()) the channel before using this API. + +5. void dmaengine_synchronize(struct dma_chan *chan) + + Synchronize the termination of the DMA channel to the current context. + + This function should be used after dmaengine_terminate_async() to synchronize + the termination of the DMA channel to the current context. The function will + wait for the transfer and any running complete callbacks to finish before it + returns. + + If dmaengine_terminate_async() is used to stop the DMA channel this function + must be called before it is safe to free memory accessed by previously + submitted descriptors or to free any resources accessed within the complete + callback of previously submitted descriptors. + + The behavior of this function is undefined if dma_async_issue_pending() has + been called between dmaengine_terminate_async() and this function. diff --git a/Documentation/dmaengine/provider.txt b/Documentation/dmaengine/provider.txt index 67d4ce4df109..122b7f4876bb 100644 --- a/Documentation/dmaengine/provider.txt +++ b/Documentation/dmaengine/provider.txt @@ -327,8 +327,24 @@ supported. * device_terminate_all - Aborts all the pending and ongoing transfers on the channel - - This command should operate synchronously on the channel, - terminating right away all the channels + - For aborted transfers the complete callback should not be called + - Can be called from atomic context or from within a complete + callback of a descriptor. Must not sleep. Drivers must be able + to handle this correctly. + - Termination may be asynchronous. The driver does not have to + wait until the currently active transfer has completely stopped. + See device_synchronize. + + * device_synchronize + - Must synchronize the termination of a channel to the current + context. + - Must make sure that memory for previously submitted + descriptors is no longer accessed by the DMA controller. + - Must make sure that all complete callbacks for previously + submitted descriptors have finished running and none are + scheduled to run. + - May sleep. + Misc notes (stuff that should be documented, but don't really know where to put them) diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 3ecec1445adf..d6fc82e3986f 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -265,8 +265,11 @@ static void dma_chan_put(struct dma_chan *chan) module_put(dma_chan_to_owner(chan)); /* This channel is not in use anymore, free it */ - if (!chan->client_count && chan->device->device_free_chan_resources) + if (!chan->client_count && chan->device->device_free_chan_resources) { + /* Make sure all operations have completed */ + dmaengine_synchronize(chan); chan->device->device_free_chan_resources(chan); + } /* If the channel is used via a DMA request router, free the mapping */ if (chan->router && chan->router->route_free) { diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index c47c68e535e8..4662d9aa6d5a 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -654,6 +654,8 @@ enum dmaengine_alignment { * paused. Returns 0 or an error code * @device_terminate_all: Aborts all transfers on a channel. Returns 0 * or an error code + * @device_synchronize: Synchronizes the termination of a transfers to the + * current context. * @device_tx_status: poll for transaction completion, the optional * txstate parameter can be supplied with a pointer to get a * struct with auxiliary transfer status information, otherwise the call @@ -737,6 +739,7 @@ struct dma_device { int (*device_pause)(struct dma_chan *chan); int (*device_resume)(struct dma_chan *chan); int (*device_terminate_all)(struct dma_chan *chan); + void (*device_synchronize)(struct dma_chan *chan); enum dma_status (*device_tx_status)(struct dma_chan *chan, dma_cookie_t cookie, @@ -828,6 +831,13 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_sg( src_sg, src_nents, flags); } +/** + * dmaengine_terminate_all() - Terminate all active DMA transfers + * @chan: The channel for which to terminate the transfers + * + * This function is DEPRECATED use either dmaengine_terminate_sync() or + * dmaengine_terminate_async() instead. + */ static inline int dmaengine_terminate_all(struct dma_chan *chan) { if (chan->device->device_terminate_all) @@ -836,6 +846,86 @@ static inline int dmaengine_terminate_all(struct dma_chan *chan) return -ENOSYS; } +/** + * dmaengine_terminate_async() - Terminate all active DMA transfers + * @chan: The channel for which to terminate the transfers + * + * Calling this function will terminate all active and pending descriptors + * that have previously been submitted to the channel. It is not guaranteed + * though that the transfer for the active descriptor has stopped when the + * function returns. Furthermore it is possible the complete callback of a + * submitted transfer is still running when this function returns. + * + * dmaengine_synchronize() needs to be called before it is safe to free + * any memory that is accessed by previously submitted descriptors or before + * freeing any resources accessed from within the completion callback of any + * perviously submitted descriptors. + * + * This function can be called from atomic context as well as from within a + * complete callback of a descriptor submitted on the same channel. + * + * If none of the two conditions above apply consider using + * dmaengine_terminate_sync() instead. + */ +static inline int dmaengine_terminate_async(struct dma_chan *chan) +{ + if (chan->device->device_terminate_all) + return chan->device->device_terminate_all(chan); + + return -EINVAL; +} + +/** + * dmaengine_synchronize() - Synchronize DMA channel termination + * @chan: The channel to synchronize + * + * Synchronizes to the DMA channel termination to the current context. When this + * function returns it is guaranteed that all transfers for previously issued + * descriptors have stopped and and it is safe to free the memory assoicated + * with them. Furthermore it is guaranteed that all complete callback functions + * for a previously submitted descriptor have finished running and it is safe to + * free resources accessed from within the complete callbacks. + * + * The behavior of this function is undefined if dma_async_issue_pending() has + * been called between dmaengine_terminate_async() and this function. + * + * This function must only be called from non-atomic context and must not be + * called from within a complete callback of a descriptor submitted on the same + * channel. + */ +static inline void dmaengine_synchronize(struct dma_chan *chan) +{ + if (chan->device->device_synchronize) + chan->device->device_synchronize(chan); +} + +/** + * dmaengine_terminate_sync() - Terminate all active DMA transfers + * @chan: The channel for which to terminate the transfers + * + * Calling this function will terminate all active and pending transfers + * that have previously been submitted to the channel. It is similar to + * dmaengine_terminate_async() but guarantees that the DMA transfer has actually + * stopped and that all complete callbacks have finished running when the + * function returns. + * + * This function must only be called from non-atomic context and must not be + * called from within a complete callback of a descriptor submitted on the same + * channel. + */ +static inline int dmaengine_terminate_sync(struct dma_chan *chan) +{ + int ret; + + ret = dmaengine_terminate_async(chan); + if (ret) + return ret; + + dmaengine_synchronize(chan); + + return 0; +} + static inline int dmaengine_pause(struct dma_chan *chan) { if (chan->device->device_pause) -- cgit v1.2.3 From 5827a4bae95b943f2d7dc9b33957c83a69f256eb Mon Sep 17 00:00:00 2001 From: M'boumba Cedric Madianga Date: Fri, 16 Oct 2015 15:59:13 +0200 Subject: dt-bindings: Document the STM32 DMA bindings This patch adds documentation of device tree bindings for the STM32 dma controller. Signed-off-by: M'boumba Cedric Madianga Acked-by: Rob Herring Signed-off-by: Vinod Koul --- .../devicetree/bindings/dma/stm32-dma.txt | 82 ++++++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/stm32-dma.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt new file mode 100644 index 000000000000..70cd13f1588a --- /dev/null +++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt @@ -0,0 +1,82 @@ +* STMicroelectronics STM32 DMA controller + +The STM32 DMA is a general-purpose direct memory access controller capable of +supporting 8 independent DMA channels. Each channel can have up to 8 requests. + +Required properties: +- compatible: Should be "st,stm32-dma" +- reg: Should contain DMA registers location and length. This should include + all of the per-channel registers. +- interrupts: Should contain all of the per-channel DMA interrupts in + ascending order with respect to the DMA channel index. +- clocks: Should contain the input clock of the DMA instance. +- #dma-cells : Must be <4>. See DMA client paragraph for more details. + +Optional properties: +- resets: Reference to a reset controller asserting the DMA controller +- st,mem2mem: boolean; if defined, it indicates that the controller supports + memory-to-memory transfer + +Example: + + dma2: dma-controller@40026400 { + compatible = "st,stm32-dma"; + reg = <0x40026400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; + clocks = <&clk_hclk>; + #dma-cells = <4>; + st,mem2mem; + resets = <&rcc 150>; + }; + +* DMA client + +DMA clients connected to the STM32 DMA controller must use the format +described in the dma.txt file, using a five-cell specifier for each +channel: a phandle plus four integer cells. +The four cells in order are: + +1. The channel id +2. The request line number +3. A 32bit mask specifying the DMA channel configuration which are device + dependent: + -bit 9: Peripheral Increment Address + 0x0: no address increment between transfers + 0x1: increment address between transfers + -bit 10: Memory Increment Address + 0x0: no address increment between transfers + 0x1: increment address between transfers + -bit 15: Peripheral Increment Offset Size + 0x0: offset size is linked to the peripheral bus width + 0x1: offset size is fixed to 4 (32-bit alignment) + -bit 16-17: Priority level + 0x0: low + 0x1: medium + 0x2: high + 0x3: very high +5. A 32bit mask specifying the DMA FIFO threshold configuration which are device + dependent: + -bit 0-1: Fifo threshold + 0x0: 1/4 full FIFO + 0x1: 1/2 full FIFO + 0x2: 3/4 full FIFO + 0x3: full FIFO + +Example: + + usart1: serial@40011000 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + clocks = <&clk_pclk2>; + dmas = <&dma2 2 4 0x10400 0x3>, + <&dma2 7 5 0x10200 0x3>; + dma-names = "rx", "tx"; + }; -- cgit v1.2.3 From fc5adbebac6ffab461492f7a415648b29b1a3b31 Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Fri, 30 Oct 2015 00:36:33 +0800 Subject: Documentation: mtd: improve nand_ecc.txt for readability and correctness This patch correct some representation errors, add a little clarification in some places, and fix indentation problems for pseudo code. It also delete one more white space for one place. Signed-off-by: Wang YanQing [Brian: a few tweaks] Signed-off-by: Brian Norris --- Documentation/mtd/nand_ecc.txt | 58 +++++++++++++++++++++--------------------- 1 file changed, 29 insertions(+), 29 deletions(-) (limited to 'Documentation') diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/mtd/nand_ecc.txt index e129b2479ea8..f8c3284bf6a7 100644 --- a/Documentation/mtd/nand_ecc.txt +++ b/Documentation/mtd/nand_ecc.txt @@ -107,7 +107,7 @@ for (i = 0; i < 256; i++) if (i & 0x01) rp1 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp1; else - rp0 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp1; + rp0 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp0; if (i & 0x02) rp3 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp3; else @@ -127,7 +127,7 @@ for (i = 0; i < 256; i++) if (i & 0x20) rp11 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp11; else - rp10 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp10; + rp10 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp10; if (i & 0x40) rp13 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp13; else @@ -158,7 +158,7 @@ the values in any order. So instead of calculating all the bits individually, let us try to rearrange things. For the column parity this is easy. We can just xor the bytes and in the end filter out the relevant bits. This is pretty nice as it will bring -all cp calculation out of the if loop. +all cp calculation out of the for loop. Similarly we can first xor the bytes for the various rows. This leads to: @@ -271,11 +271,11 @@ to write our code in such a way that we process data in 32 bit chunks. Of course this means some modification as the row parity is byte by byte. A quick analysis: for the column parity we use the par variable. When extending to 32 bits -we can in the end easily calculate p0 and p1 from it. +we can in the end easily calculate rp0 and rp1 from it. (because par now consists of 4 bytes, contributing to rp1, rp0, rp1, rp0 -respectively) +respectively, from MSB to LSB) also rp2 and rp3 can be easily retrieved from par as rp3 covers the -first two bytes and rp2 the last two bytes. +first two MSBs and rp2 covers the last two LSBs. Note that of course now the loop is executed only 64 times (256/4). And note that care must taken wrt byte ordering. The way bytes are @@ -387,11 +387,11 @@ Analysis 2 The code (of course) works, and hurray: we are a little bit faster than the linux driver code (about 15%). But wait, don't cheer too quickly. -THere is more to be gained. +There is more to be gained. If we look at e.g. rp14 and rp15 we see that we either xor our data with rp14 or with rp15. However we also have par which goes over all data. This means there is no need to calculate rp14 as it can be calculated from -rp15 through rp14 = par ^ rp15; +rp15 through rp14 = par ^ rp15, because par = rp14 ^ rp15; (or if desired we can avoid calculating rp15 and calculate it from rp14). That is why some places refer to inverse parity. Of course the same thing holds for rp4/5, rp6/7, rp8/9, rp10/11 and rp12/13. @@ -419,12 +419,12 @@ with if (i & 0x20) rp15 ^= cur; and outside the loop added: - rp4 = par ^ rp5; - rp6 = par ^ rp7; - rp8 = par ^ rp9; - rp10 = par ^ rp11; - rp12 = par ^ rp13; - rp14 = par ^ rp15; + rp4 = par ^ rp5; + rp6 = par ^ rp7; + rp8 = par ^ rp9; + rp10 = par ^ rp11; + rp12 = par ^ rp13; + rp14 = par ^ rp15; And after that the code takes about 30% more time, although the number of statements is reduced. This is also reflected in the assembly code. @@ -524,12 +524,12 @@ THe code within the for loop was changed to: cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp6 ^= cur; cur = *bp++; tmppar ^= cur; rp6 ^= cur; - cur = *bp++; tmppar ^= cur; rp4 ^= cur; - cur = *bp++; tmppar ^= cur; rp10 ^= tmppar; + cur = *bp++; tmppar ^= cur; rp4 ^= cur; + cur = *bp++; tmppar ^= cur; rp10 ^= tmppar; - cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp6 ^= cur; rp8 ^= cur; + cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp6 ^= cur; rp8 ^= cur; cur = *bp++; tmppar ^= cur; rp6 ^= cur; rp8 ^= cur; - cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp8 ^= cur; + cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp8 ^= cur; cur = *bp++; tmppar ^= cur; rp8 ^= cur; cur = *bp++; tmppar ^= cur; rp4 ^= cur; rp6 ^= cur; @@ -537,7 +537,7 @@ THe code within the for loop was changed to: cur = *bp++; tmppar ^= cur; rp4 ^= cur; cur = *bp++; tmppar ^= cur; - par ^= tmppar; + par ^= tmppar; if ((i & 0x1) == 0) rp12 ^= tmppar; if ((i & 0x2) == 0) rp14 ^= tmppar; } @@ -548,8 +548,8 @@ to rp12 and rp14. While making the changes I also found that I could exploit that tmppar contains the running parity for this iteration. So instead of having: -rp4 ^= cur; rp6 = cur; -I removed the rp6 = cur; statement and did rp6 ^= tmppar; on next +rp4 ^= cur; rp6 ^= cur; +I removed the rp6 ^= cur; statement and did rp6 ^= tmppar; on next statement. A similar change was done for rp8 and rp10 @@ -593,22 +593,22 @@ The new code now looks like: cur = *bp++; tmppar ^= cur; rp4_6 ^= cur; cur = *bp++; tmppar ^= cur; rp6 ^= cur; - cur = *bp++; tmppar ^= cur; rp4 ^= cur; - cur = *bp++; tmppar ^= cur; rp10 ^= tmppar; + cur = *bp++; tmppar ^= cur; rp4 ^= cur; + cur = *bp++; tmppar ^= cur; rp10 ^= tmppar; - notrp8 = tmppar; - cur = *bp++; tmppar ^= cur; rp4_6 ^= cur; + notrp8 = tmppar; + cur = *bp++; tmppar ^= cur; rp4_6 ^= cur; cur = *bp++; tmppar ^= cur; rp6 ^= cur; - cur = *bp++; tmppar ^= cur; rp4 ^= cur; + cur = *bp++; tmppar ^= cur; rp4 ^= cur; cur = *bp++; tmppar ^= cur; - rp8 = rp8 ^ tmppar ^ notrp8; + rp8 = rp8 ^ tmppar ^ notrp8; cur = *bp++; tmppar ^= cur; rp4_6 ^= cur; cur = *bp++; tmppar ^= cur; rp6 ^= cur; cur = *bp++; tmppar ^= cur; rp4 ^= cur; cur = *bp++; tmppar ^= cur; - par ^= tmppar; + par ^= tmppar; if ((i & 0x1) == 0) rp12 ^= tmppar; if ((i & 0x2) == 0) rp14 ^= tmppar; } @@ -700,7 +700,7 @@ Conclusion The gain when calculating the ecc is tremendous. Om my development hardware a speedup of a factor of 18 for ecc calculation was achieved. On a test on an embedded system with a MIPS core a factor 7 was obtained. -On a test with a Linksys NSLU2 (ARMv5TE processor) the speedup was a factor +On a test with a Linksys NSLU2 (ARMv5TE processor) the speedup was a factor 5 (big endian mode, gcc 4.1.2, -O3) For correction not much gain could be obtained (as bitflips are rare). Then again there are also much less cycles spent there. -- cgit v1.2.3 From 1e6460abf739310fe695bafac30c2be39d18c8f9 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Mon, 16 Nov 2015 14:37:36 +0100 Subject: doc: mtd: nand: update examples to use mtd_to_nand() mtd_to_nand() has been introduced to hide accesses to mtd->priv. All NAND controller drivers should use it instead of directly accessing the ->priv field. Signed-off-by: Boris Brezillon Signed-off-by: Brian Norris --- Documentation/DocBook/mtdnand.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 7da8f0402af5..403a7abfc2bc 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -235,7 +235,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd) static void board_hwcontrol(struct mtd_info *mtd, int cmd) { - struct nand_chip *this = (struct nand_chip *) mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); switch(cmd){ case NAND_CTL_SETCLE: this->IO_ADDR_W |= CLE_ADRR_BIT; break; case NAND_CTL_CLRCLE: this->IO_ADDR_W &= ~CLE_ADRR_BIT; break; @@ -399,7 +399,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) static void board_select_chip (struct mtd_info *mtd, int chip) { - struct nand_chip *this = (struct nand_chip *) mtd->priv; + struct nand_chip *this = mtd_to_nand(mtd); /* Deselect all chips */ this->IO_ADDR_R &= ~BOARD_NAND_ADDR_MASK; -- cgit v1.2.3 From 1d158315c13b6989f7ddb1d8d334965d14d958d8 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 16 Nov 2015 14:34:52 -0800 Subject: doc: dt: mtd: stop referring to driver code for spi-nor IDs Pull the supported chip names from drivers/mtd/devices/m25p80.c and stop pointing readers to Linux code. Also (although I see this habit repeated throughout the Documentation/devicetree/bindings/ tree), stop using the title "driver" in this file, when we're trying explicitly to describe hardware, not software. Signed-off-by: Brian Norris Cc: Acked-by: Rob Herring Reviewed-by: Javier Martinez Canillas --- .../devicetree/bindings/mtd/jedec,spi-nor.txt | 56 ++++++++++++++++++++-- 1 file changed, 51 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt index 2bee68103b01..2c91c03e7eb0 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -1,15 +1,61 @@ -* MTD SPI driver for ST M25Pxx (and similar) serial flash chips +* SPI NOR flash: ST M25Pxx (and similar) serial flash chips Required properties: - #address-cells, #size-cells : Must be present if the device has sub-nodes representing partitions. - compatible : May include a device-specific string consisting of the - manufacturer and name of the chip. Bear in mind the DT binding - is not Linux-only, but in case of Linux, see the "m25p_ids" - table in drivers/mtd/devices/m25p80.c for the list of supported - chips. + manufacturer and name of the chip. A list of supported chip + names follows. Must also include "jedec,spi-nor" for any SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F). + + Supported chip names: + at25df321a + at25df641 + at26df081a + mr25h256 + mx25l4005a + mx25l1606e + mx25l6405d + mx25l12805d + mx25l25635e + n25q064 + n25q128a11 + n25q128a13 + n25q512a + s25fl256s1 + s25fl512s + s25sl12801 + s25fl008k + s25fl064k + sst25vf040b + m25p40 + m25p80 + m25p16 + m25p32 + m25p64 + m25p128 + w25x80 + w25x32 + w25q32 + w25q32dw + w25q80bl + w25q128 + w25q256 + + The following chip names have been used historically to + designate quirky versions of flash chips that do not support the + JEDEC READ ID opcode (0x9F): + m25p05-nonjedec + m25p10-nonjedec + m25p20-nonjedec + m25p40-nonjedec + m25p80-nonjedec + m25p16-nonjedec + m25p32-nonjedec + m25p64-nonjedec + m25p128-nonjedec + - reg : Chip-Select number - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at -- cgit v1.2.3 From afe330098d255e698088e010be3cb4fa57e9ff86 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 19 Nov 2015 15:45:39 +0000 Subject: extcon: arizona: Update DT binding documentation for mic detection Add additional bindings to allow configuration of the system specific microphone detection settings. Signed-off-by: Charles Keepax Signed-off-by: Chanwoo Choi --- .../devicetree/bindings/extcon/extcon-arizona.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt index e1705fae63a8..d6618119a9a8 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt @@ -13,3 +13,23 @@ Optional properties: ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR If this node is not mentioned or if the value is unknown, then headphone detection mode is set to HPDETL. + + - wlf,micd-software-compare : Use a software comparison to determine mic + presence + - wlf,micd-detect-debounce : Additional software microphone detection + debounce specified in milliseconds. + - wlf,micd-pol-gpio : GPIO specifier for the GPIO controlling the headset + polarity if one exists. + - wlf,micd-bias-start-time : Time allowed for MICBIAS to startup prior to + performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX + defines. + - wlf,micd-rate : Delay between successive microphone detection measurements, + specified as per the ARIZONA_MICD_TIME_XXX defines. + - wlf,micd-dbtime : Microphone detection hardware debounces specified as the + number of measurements to take, valid values being 2 and 4. + - wlf,micd-timeout : Timeout for microphone detection, specified in + milliseconds. + - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone + detection. + + - wlf,gpsw : Settings for the general purpose switch -- cgit v1.2.3 From 36a86872964609f2596d22f323070b60b17e08ef Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 19 Nov 2015 15:45:40 +0000 Subject: extcon: arizona: Update DT binding documentation for jack detection Add additional bindings for both inverting the polarity of the jack detection pins and allowing the use of a second jack detection pin. Note that the second jack detection pin is hard wired in the chip so can only be enabled through the binding, rather than a pin being specified. Signed-off-by: Charles Keepax Reviewed-by: Chanwoo Choi Signed-off-by: Chanwoo Choi --- Documentation/devicetree/bindings/extcon/extcon-arizona.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt index d6618119a9a8..7640a3502c67 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt @@ -14,6 +14,12 @@ Optional properties: If this node is not mentioned or if the value is unknown, then headphone detection mode is set to HPDETL. + - wlf,use-jd-gpio : Use GPIO input along with JD1 for dual pin jack + detection. + - wlf,use-jd-gpio-nopull : Internal pull on GPIO is disabled when used for + jack detection. + - wlf,jd-invert : Invert the polarity of the jack detection switch + - wlf,micd-software-compare : Use a software comparison to determine mic presence - wlf,micd-detect-debounce : Additional software microphone detection -- cgit v1.2.3 From f307a7e9b7af401d459d26f98497c9cec766a41f Mon Sep 17 00:00:00 2001 From: James Ban Date: Thu, 19 Nov 2015 09:59:15 +0900 Subject: regulator: pv88060: new regulator driver This is the driver for the Powerventure PV88060 BUCKs and LDOs regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/pv88060.txt | 124 ++++++ drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/pv88060-regulator.c | 437 +++++++++++++++++++++ drivers/regulator/pv88060-regulator.h | 69 ++++ 5 files changed, 639 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/pv88060.txt create mode 100644 drivers/regulator/pv88060-regulator.c create mode 100644 drivers/regulator/pv88060-regulator.h (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/pv88060.txt b/Documentation/devicetree/bindings/regulator/pv88060.txt new file mode 100644 index 000000000000..10a6dadc008e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pv88060.txt @@ -0,0 +1,124 @@ +* Powerventure Semiconductor PV88060 Voltage Regulator + +Required properties: +- compatible: "pvs,pv88060". +- reg: I2C slave address, usually 0x49. +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4, + SW5, and SW6. + +Optional properties: +- Any optional property defined in regulator.txt + +Example + + pmic: pv88060@49 { + compatible = "pvs,pv88060"; + reg = <0x49>; + interrupt-parent = <&gpio>; + interrupts = <24 24>; + + regulators { + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <4387500>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + SW1 { + regulator-name = "sw1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + SW2 { + regulator-name = "sw2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW3 { + regulator-name = "sw3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW4 { + regulator-name = "sw4"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW5 { + regulator-name = "sw5"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW6 { + regulator-name = "sw6"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + }; \ No newline at end of file diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8df0b0e62976..c61f72ff1dfd 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -504,6 +504,14 @@ config REGULATOR_PFUZE100 Say y here to support the regulators found on the Freescale PFUZE100/PFUZE200 PMIC. +config REGULATOR_PV88060 + tristate "Powerventure Semiconductor PV88060 regulator" + depends on I2C + select REGMAP_I2C + help + Say y here to support the voltage regulators and convertors + PV88060 + config REGULATOR_PWM tristate "PWM voltage regulator" depends on PWM diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 0f8174913c17..b11c8a4f873a 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -66,6 +66,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o +obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o diff --git a/drivers/regulator/pv88060-regulator.c b/drivers/regulator/pv88060-regulator.c new file mode 100644 index 000000000000..60b16d835df7 --- /dev/null +++ b/drivers/regulator/pv88060-regulator.c @@ -0,0 +1,437 @@ +/* + * pv88060-regulator.c - Regulator device driver for PV88060 + * Copyright (C) 2015 Powerventure Semiconductor Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "pv88060-regulator.h" + +#define PV88060_MAX_REGULATORS 14 + +/* PV88060 REGULATOR IDs */ +enum { + /* BUCKs */ + PV88060_ID_BUCK1, + + /* LDOs */ + PV88060_ID_LDO1, + PV88060_ID_LDO2, + PV88060_ID_LDO3, + PV88060_ID_LDO4, + PV88060_ID_LDO5, + PV88060_ID_LDO6, + PV88060_ID_LDO7, + + /* SWTs */ + PV88060_ID_SW1, + PV88060_ID_SW2, + PV88060_ID_SW3, + PV88060_ID_SW4, + PV88060_ID_SW5, + PV88060_ID_SW6, +}; + +struct pv88060_regulator { + struct regulator_desc desc; + /* Current limiting */ + unsigned n_current_limits; + const int *current_limits; + unsigned int limit_mask; + unsigned int conf; /* buck configuration register */ +}; + +struct pv88060 { + struct device *dev; + struct regmap *regmap; + struct regulator_dev *rdev[PV88060_MAX_REGULATORS]; +}; + +static const struct regmap_config pv88060_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +/* Current limits array (in uA) for BUCK1 + * Entry indexes corresponds to register values. + */ + +static const int pv88060_buck1_limits[] = { + 1496000, 2393000, 3291000, 4189000 +}; + +static unsigned int pv88060_buck_get_mode(struct regulator_dev *rdev) +{ + struct pv88060_regulator *info = rdev_get_drvdata(rdev); + unsigned int data; + int ret, mode = 0; + + ret = regmap_read(rdev->regmap, info->conf, &data); + if (ret < 0) + return ret; + + switch (data & PV88060_BUCK_MODE_MASK) { + case PV88060_BUCK_MODE_SYNC: + mode = REGULATOR_MODE_FAST; + break; + case PV88060_BUCK_MODE_AUTO: + mode = REGULATOR_MODE_NORMAL; + break; + case PV88060_BUCK_MODE_SLEEP: + mode = REGULATOR_MODE_STANDBY; + break; + } + + return mode; +} + +static int pv88060_buck_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct pv88060_regulator *info = rdev_get_drvdata(rdev); + int val = 0; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = PV88060_BUCK_MODE_SYNC; + break; + case REGULATOR_MODE_NORMAL: + val = PV88060_BUCK_MODE_AUTO; + break; + case REGULATOR_MODE_STANDBY: + val = PV88060_BUCK_MODE_SLEEP; + break; + default: + return -EINVAL; + } + + return regmap_update_bits(rdev->regmap, info->conf, + PV88060_BUCK_MODE_MASK, val); +} + +static int pv88060_set_current_limit(struct regulator_dev *rdev, int min, + int max) +{ + struct pv88060_regulator *info = rdev_get_drvdata(rdev); + int i; + + /* search for closest to maximum */ + for (i = info->n_current_limits; i >= 0; i--) { + if (min <= info->current_limits[i] + && max >= info->current_limits[i]) { + return regmap_update_bits(rdev->regmap, + info->conf, + info->limit_mask, + i << PV88060_BUCK_ILIM_SHIFT); + } + } + + return -EINVAL; +} + +static int pv88060_get_current_limit(struct regulator_dev *rdev) +{ + struct pv88060_regulator *info = rdev_get_drvdata(rdev); + unsigned int data; + int ret; + + ret = regmap_read(rdev->regmap, info->conf, &data); + if (ret < 0) + return ret; + + data = (data & info->limit_mask) >> PV88060_BUCK_ILIM_SHIFT; + return info->current_limits[data]; +} + +static struct regulator_ops pv88060_buck_ops = { + .get_mode = pv88060_buck_get_mode, + .set_mode = pv88060_buck_set_mode, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_current_limit = pv88060_set_current_limit, + .get_current_limit = pv88060_get_current_limit, +}; + +static struct regulator_ops pv88060_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, +}; + +#define PV88060_BUCK(chip, regl_name, min, step, max, limits_array) \ +{\ + .desc = {\ + .id = chip##_ID_##regl_name,\ + .name = __stringify(chip##_##regl_name),\ + .of_match = of_match_ptr(#regl_name),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .ops = &pv88060_buck_ops,\ + .min_uV = min,\ + .uV_step = step,\ + .n_voltages = ((max) - (min))/(step) + 1,\ + .enable_reg = PV88060_REG_##regl_name##_CONF0,\ + .enable_mask = PV88060_BUCK_EN, \ + .vsel_reg = PV88060_REG_##regl_name##_CONF0,\ + .vsel_mask = PV88060_VBUCK_MASK,\ + },\ + .current_limits = limits_array,\ + .n_current_limits = ARRAY_SIZE(limits_array),\ + .limit_mask = PV88060_BUCK_ILIM_MASK, \ + .conf = PV88060_REG_##regl_name##_CONF1,\ +} + +#define PV88060_LDO(chip, regl_name, min, step, max) \ +{\ + .desc = {\ + .id = chip##_ID_##regl_name,\ + .name = __stringify(chip##_##regl_name),\ + .of_match = of_match_ptr(#regl_name),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .ops = &pv88060_ldo_ops,\ + .min_uV = min, \ + .uV_step = step, \ + .n_voltages = (step) ? ((max - min) / step + 1) : 1, \ + .enable_reg = PV88060_REG_##regl_name##_CONF, \ + .enable_mask = PV88060_LDO_EN, \ + .vsel_reg = PV88060_REG_##regl_name##_CONF, \ + .vsel_mask = PV88060_VLDO_MASK, \ + },\ +} + +#define PV88060_SW(chip, regl_name, max) \ +{\ + .desc = {\ + .id = chip##_ID_##regl_name,\ + .name = __stringify(chip##_##regl_name),\ + .of_match = of_match_ptr(#regl_name),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .ops = &pv88060_ldo_ops,\ + .min_uV = max,\ + .uV_step = 0,\ + .n_voltages = 1,\ + .enable_reg = PV88060_REG_##regl_name##_CONF,\ + .enable_mask = PV88060_SW_EN,\ + },\ +} + +static const struct pv88060_regulator pv88060_regulator_info[] = { + PV88060_BUCK(PV88060, BUCK1, 2800000, 12500, 4387500, + pv88060_buck1_limits), + PV88060_LDO(PV88060, LDO1, 1200000, 50000, 3350000), + PV88060_LDO(PV88060, LDO2, 1200000, 50000, 3350000), + PV88060_LDO(PV88060, LDO3, 1200000, 50000, 3350000), + PV88060_LDO(PV88060, LDO4, 1200000, 50000, 3350000), + PV88060_LDO(PV88060, LDO5, 1200000, 50000, 3350000), + PV88060_LDO(PV88060, LDO6, 1200000, 50000, 3350000), + PV88060_LDO(PV88060, LDO7, 1200000, 50000, 3350000), + PV88060_SW(PV88060, SW1, 5000000), + PV88060_SW(PV88060, SW2, 5000000), + PV88060_SW(PV88060, SW3, 5000000), + PV88060_SW(PV88060, SW4, 5000000), + PV88060_SW(PV88060, SW5, 5000000), + PV88060_SW(PV88060, SW6, 5000000), +}; + +static irqreturn_t pv88060_irq_handler(int irq, void *data) +{ + struct pv88060 *chip = data; + int i, reg_val, err, ret = IRQ_NONE; + + err = regmap_read(chip->regmap, PV88060_REG_EVENT_A, ®_val); + if (err < 0) + goto error_i2c; + + if (reg_val & PV88060_E_VDD_FLT) { + for (i = 0; i < PV88060_MAX_REGULATORS; i++) { + if (chip->rdev[i] != NULL) { + regulator_notifier_call_chain(chip->rdev[i], + REGULATOR_EVENT_UNDER_VOLTAGE, + NULL); + } + } + + err = regmap_update_bits(chip->regmap, PV88060_REG_EVENT_A, + PV88060_E_VDD_FLT, PV88060_E_VDD_FLT); + if (err < 0) + goto error_i2c; + + ret = IRQ_HANDLED; + } + + if (reg_val & PV88060_E_OVER_TEMP) { + for (i = 0; i < PV88060_MAX_REGULATORS; i++) { + if (chip->rdev[i] != NULL) { + regulator_notifier_call_chain(chip->rdev[i], + REGULATOR_EVENT_OVER_TEMP, + NULL); + } + } + + err = regmap_update_bits(chip->regmap, PV88060_REG_EVENT_A, + PV88060_E_OVER_TEMP, PV88060_E_OVER_TEMP); + if (err < 0) + goto error_i2c; + + ret = IRQ_HANDLED; + } + + return ret; + +error_i2c: + dev_err(chip->dev, "I2C error : %d\n", err); + return IRQ_NONE; +} + +/* + * I2C driver interface functions + */ +static int pv88060_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev); + struct pv88060 *chip; + struct regulator_config config = { }; + int error, i, ret = 0; + + chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88060), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->dev = &i2c->dev; + chip->regmap = devm_regmap_init_i2c(i2c, &pv88060_regmap_config); + if (IS_ERR(chip->regmap)) { + error = PTR_ERR(chip->regmap); + dev_err(chip->dev, "Failed to allocate register map: %d\n", + error); + return error; + } + + i2c_set_clientdata(i2c, chip); + + if (i2c->irq != 0) { + ret = regmap_write(chip->regmap, PV88060_REG_MASK_A, 0xFF); + if (ret < 0) { + dev_err(chip->dev, + "Failed to mask A reg: %d\n", ret); + return ret; + } + + regmap_write(chip->regmap, PV88060_REG_MASK_B, 0xFF); + if (ret < 0) { + dev_err(chip->dev, + "Failed to mask B reg: %d\n", ret); + return ret; + } + + regmap_write(chip->regmap, PV88060_REG_MASK_C, 0xFF); + if (ret < 0) { + dev_err(chip->dev, + "Failed to mask C reg: %d\n", ret); + return ret; + } + + ret = request_threaded_irq(i2c->irq, NULL, + pv88060_irq_handler, + IRQF_TRIGGER_LOW|IRQF_ONESHOT, + "pv88060", chip); + if (ret != 0) { + dev_err(chip->dev, "Failed to request IRQ: %d\n", + i2c->irq); + return ret; + } + + ret = regmap_update_bits(chip->regmap, PV88060_REG_MASK_A, + PV88060_M_VDD_FLT | PV88060_M_OVER_TEMP, 0); + if (ret < 0) { + dev_err(chip->dev, + "Failed to update mask reg: %d\n", ret); + return ret; + } + + } else { + dev_warn(chip->dev, "No IRQ configured\n"); + } + + config.dev = chip->dev; + config.regmap = chip->regmap; + + for (i = 0; i < PV88060_MAX_REGULATORS; i++) { + if (init_data) + config.init_data = &init_data[i]; + + config.driver_data = (void *)&pv88060_regulator_info[i]; + chip->rdev[i] = devm_regulator_register(chip->dev, + &pv88060_regulator_info[i].desc, &config); + if (IS_ERR(chip->rdev[i])) { + dev_err(chip->dev, + "Failed to register PV88060 regulator\n"); + return PTR_ERR(chip->rdev[i]); + } + } + + return 0; +} + +static const struct i2c_device_id pv88060_i2c_id[] = { + {"pv88060", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, pv88060_i2c_id); + +#ifdef CONFIG_OF +static const struct of_device_id pv88060_dt_ids[] = { + { .compatible = "pvs,pv88060", .data = &pv88060_i2c_id[0] }, + {}, +}; +MODULE_DEVICE_TABLE(of, pv88060_dt_ids); +#endif + +static struct i2c_driver pv88060_regulator_driver = { + .driver = { + .name = "pv88060", + .of_match_table = of_match_ptr(pv88060_dt_ids), + }, + .probe = pv88060_i2c_probe, + .id_table = pv88060_i2c_id, +}; + +module_i2c_driver(pv88060_regulator_driver); + +MODULE_AUTHOR("James Ban "); +MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88060"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/pv88060-regulator.h b/drivers/regulator/pv88060-regulator.h new file mode 100644 index 000000000000..02ca9203a172 --- /dev/null +++ b/drivers/regulator/pv88060-regulator.h @@ -0,0 +1,69 @@ +/* + * pv88060-regulator.h - Regulator definitions for PV88060 + * Copyright (C) 2015 Powerventure Semiconductor Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __PV88060_REGISTERS_H__ +#define __PV88060_REGISTERS_H__ + +/* System Control and Event Registers */ +#define PV88060_REG_EVENT_A 0x04 +#define PV88060_REG_MASK_A 0x08 +#define PV88060_REG_MASK_B 0x09 +#define PV88060_REG_MASK_C 0x0A + +/* Regulator Registers */ +#define PV88060_REG_BUCK1_CONF0 0x1B +#define PV88060_REG_BUCK1_CONF1 0x1C +#define PV88060_REG_LDO1_CONF 0x1D +#define PV88060_REG_LDO2_CONF 0x1E +#define PV88060_REG_LDO3_CONF 0x1F +#define PV88060_REG_LDO4_CONF 0x20 +#define PV88060_REG_LDO5_CONF 0x21 +#define PV88060_REG_LDO6_CONF 0x22 +#define PV88060_REG_LDO7_CONF 0x23 + +#define PV88060_REG_SW1_CONF 0x3B +#define PV88060_REG_SW2_CONF 0x3C +#define PV88060_REG_SW3_CONF 0x3D +#define PV88060_REG_SW4_CONF 0x3E +#define PV88060_REG_SW5_CONF 0x3F +#define PV88060_REG_SW6_CONF 0x40 + +/* PV88060_REG_EVENT_A (addr=0x04) */ +#define PV88060_E_VDD_FLT 0x01 +#define PV88060_E_OVER_TEMP 0x02 + +/* PV88060_REG_MASK_A (addr=0x08) */ +#define PV88060_M_VDD_FLT 0x01 +#define PV88060_M_OVER_TEMP 0x02 + +/* PV88060_REG_BUCK1_CONF0 (addr=0x1B) */ +#define PV88060_BUCK_EN 0x80 +#define PV88060_VBUCK_MASK 0x7F +/* PV88060_REG_LDO1/2/3/4/5/6/7_CONT */ +#define PV88060_LDO_EN 0x40 +#define PV88060_VLDO_MASK 0x3F +/* PV88060_REG_SW1/2/3/4/5_CONF */ +#define PV88060_SW_EN 0x80 + +/* PV88060_REG_BUCK1_CONF1 (addr=0x1C) */ +#define PV88060_BUCK_ILIM_SHIFT 2 +#define PV88060_BUCK_ILIM_MASK 0x0C +#define PV88060_BUCK_MODE_SHIFT 0 +#define PV88060_BUCK_MODE_MASK 0x03 +#define PV88060_BUCK_MODE_SLEEP 0x00 +#define PV88060_BUCK_MODE_AUTO 0x01 +#define PV88060_BUCK_MODE_SYNC 0x02 + +#endif /* __PV88060_REGISTERS_H__ */ -- cgit v1.2.3 From fbdb5d78ce7085966eb958ce8e003b1f8c2aaad4 Mon Sep 17 00:00:00 2001 From: "leilk.liu@mediatek.com" Date: Fri, 20 Nov 2015 10:21:16 +0800 Subject: spi: mediatek: update document devicetree bindings to fix syntax error This patch updates document devicetree bindings to fix syntax error. Signed-off-by: Leilk Liu Acked-by: Rob Herring Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/spi-mt65xx.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index ce363c923f44..fba8334bfd17 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -32,7 +32,7 @@ Optional properties: -cs-gpios: see spi-bus.txt, only required for MT8173. - mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi - controller used. This is a array, the element value should be 0~3, + controller used. This is an array, the element value should be 0~3, only required for MT8173. 0: specify GPIO69,70,71,72 for spi pins. 1: specify GPIO102,103,104,105 for spi pins. -- cgit v1.2.3 From 6e6a9cd461073256977bc8c91aba3c847e80fbd2 Mon Sep 17 00:00:00 2001 From: "leilk.liu@mediatek.com" Date: Fri, 20 Nov 2015 10:21:17 +0800 Subject: spi: mediatek: remove unrequired description cs-gpios isn't required with patch "spi: mediatek: single device does not require cs_gpios", so modify the description. Signed-off-by: Leilk Liu Acked-by: Rob Herring Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/spi-mt65xx.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index fba8334bfd17..60a183c16e6e 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -29,7 +29,7 @@ Required properties: muxes clock, and "spi-clk" for the clock gate. Optional properties: --cs-gpios: see spi-bus.txt, only required for MT8173. +-cs-gpios: see spi-bus.txt. - mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi controller used. This is an array, the element value should be 0~3, -- cgit v1.2.3 From 5eca4d843f9f0c3140a8657ba2f8217ee6c08c11 Mon Sep 17 00:00:00 2001 From: Joshua Clayton Date: Wed, 18 Nov 2015 14:30:37 -0800 Subject: spi: Move spi code from Documentation to tools Jon Corbet requested this code moved with the last changeset, https://lkml.org/lkml/2015/3/1/144, but the patch was not applied because it missed the Makefile. Moved spidev_test, spidev_fdx and their Makefile infrastructure. Signed-off-by: Joshua Clayton Signed-off-by: Mark Brown --- Documentation/Makefile | 2 +- Documentation/spi/Makefile | 8 - Documentation/spi/spidev_fdx.c | 158 -------------------- Documentation/spi/spidev_test.c | 318 ---------------------------------------- tools/Makefile | 7 +- tools/spi/Makefile | 4 + tools/spi/spidev_fdx.c | 158 ++++++++++++++++++++ tools/spi/spidev_test.c | 318 ++++++++++++++++++++++++++++++++++++++++ 8 files changed, 485 insertions(+), 488 deletions(-) delete mode 100644 Documentation/spi/Makefile delete mode 100644 Documentation/spi/spidev_fdx.c delete mode 100644 Documentation/spi/spidev_test.c create mode 100644 tools/spi/Makefile create mode 100644 tools/spi/spidev_fdx.c create mode 100644 tools/spi/spidev_test.c (limited to 'Documentation') diff --git a/Documentation/Makefile b/Documentation/Makefile index bc0548201755..1207d7907650 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -1,4 +1,4 @@ subdir-y := accounting auxdisplay blackfin connector \ filesystems filesystems ia64 laptops mic misc-devices \ - networking pcmcia prctl ptp spi timers vDSO video4linux \ + networking pcmcia prctl ptp timers vDSO video4linux \ watchdog diff --git a/Documentation/spi/Makefile b/Documentation/spi/Makefile deleted file mode 100644 index efa255813e9d..000000000000 --- a/Documentation/spi/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# List of programs to build -hostprogs-y := spidev_test spidev_fdx - -# Tell kbuild to always build the programs -always := $(hostprogs-y) - -HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include -HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include diff --git a/Documentation/spi/spidev_fdx.c b/Documentation/spi/spidev_fdx.c deleted file mode 100644 index 0ea3e51292fc..000000000000 --- a/Documentation/spi/spidev_fdx.c +++ /dev/null @@ -1,158 +0,0 @@ -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - - -static int verbose; - -static void do_read(int fd, int len) -{ - unsigned char buf[32], *bp; - int status; - - /* read at least 2 bytes, no more than 32 */ - if (len < 2) - len = 2; - else if (len > sizeof(buf)) - len = sizeof(buf); - memset(buf, 0, sizeof buf); - - status = read(fd, buf, len); - if (status < 0) { - perror("read"); - return; - } - if (status != len) { - fprintf(stderr, "short read\n"); - return; - } - - printf("read(%2d, %2d): %02x %02x,", len, status, - buf[0], buf[1]); - status -= 2; - bp = buf + 2; - while (status-- > 0) - printf(" %02x", *bp++); - printf("\n"); -} - -static void do_msg(int fd, int len) -{ - struct spi_ioc_transfer xfer[2]; - unsigned char buf[32], *bp; - int status; - - memset(xfer, 0, sizeof xfer); - memset(buf, 0, sizeof buf); - - if (len > sizeof buf) - len = sizeof buf; - - buf[0] = 0xaa; - xfer[0].tx_buf = (unsigned long)buf; - xfer[0].len = 1; - - xfer[1].rx_buf = (unsigned long) buf; - xfer[1].len = len; - - status = ioctl(fd, SPI_IOC_MESSAGE(2), xfer); - if (status < 0) { - perror("SPI_IOC_MESSAGE"); - return; - } - - printf("response(%2d, %2d): ", len, status); - for (bp = buf; len; len--) - printf(" %02x", *bp++); - printf("\n"); -} - -static void dumpstat(const char *name, int fd) -{ - __u8 lsb, bits; - __u32 mode, speed; - - if (ioctl(fd, SPI_IOC_RD_MODE32, &mode) < 0) { - perror("SPI rd_mode"); - return; - } - if (ioctl(fd, SPI_IOC_RD_LSB_FIRST, &lsb) < 0) { - perror("SPI rd_lsb_fist"); - return; - } - if (ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits) < 0) { - perror("SPI bits_per_word"); - return; - } - if (ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed) < 0) { - perror("SPI max_speed_hz"); - return; - } - - printf("%s: spi mode 0x%x, %d bits %sper word, %d Hz max\n", - name, mode, bits, lsb ? "(lsb first) " : "", speed); -} - -int main(int argc, char **argv) -{ - int c; - int readcount = 0; - int msglen = 0; - int fd; - const char *name; - - while ((c = getopt(argc, argv, "hm:r:v")) != EOF) { - switch (c) { - case 'm': - msglen = atoi(optarg); - if (msglen < 0) - goto usage; - continue; - case 'r': - readcount = atoi(optarg); - if (readcount < 0) - goto usage; - continue; - case 'v': - verbose++; - continue; - case 'h': - case '?': -usage: - fprintf(stderr, - "usage: %s [-h] [-m N] [-r N] /dev/spidevB.D\n", - argv[0]); - return 1; - } - } - - if ((optind + 1) != argc) - goto usage; - name = argv[optind]; - - fd = open(name, O_RDWR); - if (fd < 0) { - perror("open"); - return 1; - } - - dumpstat(name, fd); - - if (msglen) - do_msg(fd, msglen); - - if (readcount) - do_read(fd, readcount); - - close(fd); - return 0; -} diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c deleted file mode 100644 index 135b3f592b83..000000000000 --- a/Documentation/spi/spidev_test.c +++ /dev/null @@ -1,318 +0,0 @@ -/* - * SPI testing utility (using spidev driver) - * - * Copyright (c) 2007 MontaVista Software, Inc. - * Copyright (c) 2007 Anton Vorontsov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - * - * Cross-compile with cross-gcc -I/path/to/cross-kernel/include - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) - -static void pabort(const char *s) -{ - perror(s); - abort(); -} - -static const char *device = "/dev/spidev1.1"; -static uint32_t mode; -static uint8_t bits = 8; -static uint32_t speed = 500000; -static uint16_t delay; -static int verbose; - -uint8_t default_tx[] = { - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x40, 0x00, 0x00, 0x00, 0x00, 0x95, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xF0, 0x0D, -}; - -uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, }; -char *input_tx; - -static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix) -{ - int i = 0; - const unsigned char *address = src; - const unsigned char *line = address; - unsigned char c; - - printf("%s | ", prefix); - while (length-- > 0) { - printf("%02X ", *address++); - if (!(++i % line_size) || (length == 0 && i % line_size)) { - if (length == 0) { - while (i++ % line_size) - printf("__ "); - } - printf(" | "); /* right close */ - while (line < address) { - c = *line++; - printf("%c", (c < 33 || c == 255) ? 0x2E : c); - } - printf("\n"); - if (length > 0) - printf("%s | ", prefix); - } - } -} - -/* - * Unescape - process hexadecimal escape character - * converts shell input "\x23" -> 0x23 - */ -static int unescape(char *_dst, char *_src, size_t len) -{ - int ret = 0; - char *src = _src; - char *dst = _dst; - unsigned int ch; - - while (*src) { - if (*src == '\\' && *(src+1) == 'x') { - sscanf(src + 2, "%2x", &ch); - src += 4; - *dst++ = (unsigned char)ch; - } else { - *dst++ = *src++; - } - ret++; - } - return ret; -} - -static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len) -{ - int ret; - - struct spi_ioc_transfer tr = { - .tx_buf = (unsigned long)tx, - .rx_buf = (unsigned long)rx, - .len = len, - .delay_usecs = delay, - .speed_hz = speed, - .bits_per_word = bits, - }; - - if (mode & SPI_TX_QUAD) - tr.tx_nbits = 4; - else if (mode & SPI_TX_DUAL) - tr.tx_nbits = 2; - if (mode & SPI_RX_QUAD) - tr.rx_nbits = 4; - else if (mode & SPI_RX_DUAL) - tr.rx_nbits = 2; - if (!(mode & SPI_LOOP)) { - if (mode & (SPI_TX_QUAD | SPI_TX_DUAL)) - tr.rx_buf = 0; - else if (mode & (SPI_RX_QUAD | SPI_RX_DUAL)) - tr.tx_buf = 0; - } - - ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); - if (ret < 1) - pabort("can't send spi message"); - - if (verbose) - hex_dump(tx, len, 32, "TX"); - hex_dump(rx, len, 32, "RX"); -} - -static void print_usage(const char *prog) -{ - printf("Usage: %s [-DsbdlHOLC3]\n", prog); - puts(" -D --device device to use (default /dev/spidev1.1)\n" - " -s --speed max speed (Hz)\n" - " -d --delay delay (usec)\n" - " -b --bpw bits per word \n" - " -l --loop loopback\n" - " -H --cpha clock phase\n" - " -O --cpol clock polarity\n" - " -L --lsb least significant bit first\n" - " -C --cs-high chip select active high\n" - " -3 --3wire SI/SO signals shared\n" - " -v --verbose Verbose (show tx buffer)\n" - " -p Send data (e.g. \"1234\\xde\\xad\")\n" - " -N --no-cs no chip select\n" - " -R --ready slave pulls low to pause\n" - " -2 --dual dual transfer\n" - " -4 --quad quad transfer\n"); - exit(1); -} - -static void parse_opts(int argc, char *argv[]) -{ - while (1) { - static const struct option lopts[] = { - { "device", 1, 0, 'D' }, - { "speed", 1, 0, 's' }, - { "delay", 1, 0, 'd' }, - { "bpw", 1, 0, 'b' }, - { "loop", 0, 0, 'l' }, - { "cpha", 0, 0, 'H' }, - { "cpol", 0, 0, 'O' }, - { "lsb", 0, 0, 'L' }, - { "cs-high", 0, 0, 'C' }, - { "3wire", 0, 0, '3' }, - { "no-cs", 0, 0, 'N' }, - { "ready", 0, 0, 'R' }, - { "dual", 0, 0, '2' }, - { "verbose", 0, 0, 'v' }, - { "quad", 0, 0, '4' }, - { NULL, 0, 0, 0 }, - }; - int c; - - c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24p:v", lopts, NULL); - - if (c == -1) - break; - - switch (c) { - case 'D': - device = optarg; - break; - case 's': - speed = atoi(optarg); - break; - case 'd': - delay = atoi(optarg); - break; - case 'b': - bits = atoi(optarg); - break; - case 'l': - mode |= SPI_LOOP; - break; - case 'H': - mode |= SPI_CPHA; - break; - case 'O': - mode |= SPI_CPOL; - break; - case 'L': - mode |= SPI_LSB_FIRST; - break; - case 'C': - mode |= SPI_CS_HIGH; - break; - case '3': - mode |= SPI_3WIRE; - break; - case 'N': - mode |= SPI_NO_CS; - break; - case 'v': - verbose = 1; - break; - case 'R': - mode |= SPI_READY; - break; - case 'p': - input_tx = optarg; - break; - case '2': - mode |= SPI_TX_DUAL; - break; - case '4': - mode |= SPI_TX_QUAD; - break; - default: - print_usage(argv[0]); - break; - } - } - if (mode & SPI_LOOP) { - if (mode & SPI_TX_DUAL) - mode |= SPI_RX_DUAL; - if (mode & SPI_TX_QUAD) - mode |= SPI_RX_QUAD; - } -} - -int main(int argc, char *argv[]) -{ - int ret = 0; - int fd; - uint8_t *tx; - uint8_t *rx; - int size; - - parse_opts(argc, argv); - - fd = open(device, O_RDWR); - if (fd < 0) - pabort("can't open device"); - - /* - * spi mode - */ - ret = ioctl(fd, SPI_IOC_WR_MODE32, &mode); - if (ret == -1) - pabort("can't set spi mode"); - - ret = ioctl(fd, SPI_IOC_RD_MODE32, &mode); - if (ret == -1) - pabort("can't get spi mode"); - - /* - * bits per word - */ - ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); - if (ret == -1) - pabort("can't set bits per word"); - - ret = ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits); - if (ret == -1) - pabort("can't get bits per word"); - - /* - * max speed hz - */ - ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); - if (ret == -1) - pabort("can't set max speed hz"); - - ret = ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed); - if (ret == -1) - pabort("can't get max speed hz"); - - printf("spi mode: 0x%x\n", mode); - printf("bits per word: %d\n", bits); - printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); - - if (input_tx) { - size = strlen(input_tx+1); - tx = malloc(size); - rx = malloc(size); - size = unescape((char *)tx, input_tx, size); - transfer(fd, tx, rx, size); - free(rx); - free(tx); - } else { - transfer(fd, default_tx, default_rx, sizeof(default_tx)); - } - - close(fd); - - return ret; -} diff --git a/tools/Makefile b/tools/Makefile index d6f307dfb1a3..0528aa13ccb4 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -17,6 +17,7 @@ help: @echo ' lguest - a minimal 32-bit x86 hypervisor' @echo ' perf - Linux performance measurement and analysis tool' @echo ' selftests - various kernel selftests' + @echo ' spi - spi tools' @echo ' turbostat - Intel CPU idle stats and freq reporting tool' @echo ' usb - USB testing tools' @echo ' virtio - vhost test module' @@ -48,7 +49,7 @@ acpi: FORCE cpupower: FORCE $(call descend,power/$@) -cgroup firewire hv guest usb virtio vm net iio: FORCE +cgroup firewire hv guest spi usb virtio vm net iio: FORCE $(call descend,$@) liblockdep: FORCE @@ -109,7 +110,7 @@ acpi_clean: cpupower_clean: $(call descend,power/cpupower,clean) -cgroup_clean hv_clean firewire_clean lguest_clean usb_clean virtio_clean vm_clean net_clean iio_clean: +cgroup_clean hv_clean firewire_clean lguest_clean spi_clean usb_clean virtio_clean vm_clean net_clean iio_clean: $(call descend,$(@:_clean=),clean) liblockdep_clean: @@ -134,7 +135,7 @@ freefall_clean: $(call descend,laptop/freefall,clean) clean: acpi_clean cgroup_clean cpupower_clean hv_clean firewire_clean lguest_clean \ - perf_clean selftests_clean turbostat_clean usb_clean virtio_clean \ + perf_clean selftests_clean turbostat_clean spi_clean usb_clean virtio_clean \ vm_clean net_clean iio_clean x86_energy_perf_policy_clean tmon_clean \ freefall_clean diff --git a/tools/spi/Makefile b/tools/spi/Makefile new file mode 100644 index 000000000000..cd0db62e4d9d --- /dev/null +++ b/tools/spi/Makefile @@ -0,0 +1,4 @@ +all: spidev_test spidev_fdx + +clean: + $(RM) spidev_test spidev_fdx diff --git a/tools/spi/spidev_fdx.c b/tools/spi/spidev_fdx.c new file mode 100644 index 000000000000..0ea3e51292fc --- /dev/null +++ b/tools/spi/spidev_fdx.c @@ -0,0 +1,158 @@ +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + + +static int verbose; + +static void do_read(int fd, int len) +{ + unsigned char buf[32], *bp; + int status; + + /* read at least 2 bytes, no more than 32 */ + if (len < 2) + len = 2; + else if (len > sizeof(buf)) + len = sizeof(buf); + memset(buf, 0, sizeof buf); + + status = read(fd, buf, len); + if (status < 0) { + perror("read"); + return; + } + if (status != len) { + fprintf(stderr, "short read\n"); + return; + } + + printf("read(%2d, %2d): %02x %02x,", len, status, + buf[0], buf[1]); + status -= 2; + bp = buf + 2; + while (status-- > 0) + printf(" %02x", *bp++); + printf("\n"); +} + +static void do_msg(int fd, int len) +{ + struct spi_ioc_transfer xfer[2]; + unsigned char buf[32], *bp; + int status; + + memset(xfer, 0, sizeof xfer); + memset(buf, 0, sizeof buf); + + if (len > sizeof buf) + len = sizeof buf; + + buf[0] = 0xaa; + xfer[0].tx_buf = (unsigned long)buf; + xfer[0].len = 1; + + xfer[1].rx_buf = (unsigned long) buf; + xfer[1].len = len; + + status = ioctl(fd, SPI_IOC_MESSAGE(2), xfer); + if (status < 0) { + perror("SPI_IOC_MESSAGE"); + return; + } + + printf("response(%2d, %2d): ", len, status); + for (bp = buf; len; len--) + printf(" %02x", *bp++); + printf("\n"); +} + +static void dumpstat(const char *name, int fd) +{ + __u8 lsb, bits; + __u32 mode, speed; + + if (ioctl(fd, SPI_IOC_RD_MODE32, &mode) < 0) { + perror("SPI rd_mode"); + return; + } + if (ioctl(fd, SPI_IOC_RD_LSB_FIRST, &lsb) < 0) { + perror("SPI rd_lsb_fist"); + return; + } + if (ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits) < 0) { + perror("SPI bits_per_word"); + return; + } + if (ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed) < 0) { + perror("SPI max_speed_hz"); + return; + } + + printf("%s: spi mode 0x%x, %d bits %sper word, %d Hz max\n", + name, mode, bits, lsb ? "(lsb first) " : "", speed); +} + +int main(int argc, char **argv) +{ + int c; + int readcount = 0; + int msglen = 0; + int fd; + const char *name; + + while ((c = getopt(argc, argv, "hm:r:v")) != EOF) { + switch (c) { + case 'm': + msglen = atoi(optarg); + if (msglen < 0) + goto usage; + continue; + case 'r': + readcount = atoi(optarg); + if (readcount < 0) + goto usage; + continue; + case 'v': + verbose++; + continue; + case 'h': + case '?': +usage: + fprintf(stderr, + "usage: %s [-h] [-m N] [-r N] /dev/spidevB.D\n", + argv[0]); + return 1; + } + } + + if ((optind + 1) != argc) + goto usage; + name = argv[optind]; + + fd = open(name, O_RDWR); + if (fd < 0) { + perror("open"); + return 1; + } + + dumpstat(name, fd); + + if (msglen) + do_msg(fd, msglen); + + if (readcount) + do_read(fd, readcount); + + close(fd); + return 0; +} diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c new file mode 100644 index 000000000000..135b3f592b83 --- /dev/null +++ b/tools/spi/spidev_test.c @@ -0,0 +1,318 @@ +/* + * SPI testing utility (using spidev driver) + * + * Copyright (c) 2007 MontaVista Software, Inc. + * Copyright (c) 2007 Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * Cross-compile with cross-gcc -I/path/to/cross-kernel/include + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) + +static void pabort(const char *s) +{ + perror(s); + abort(); +} + +static const char *device = "/dev/spidev1.1"; +static uint32_t mode; +static uint8_t bits = 8; +static uint32_t speed = 500000; +static uint16_t delay; +static int verbose; + +uint8_t default_tx[] = { + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x95, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xF0, 0x0D, +}; + +uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, }; +char *input_tx; + +static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix) +{ + int i = 0; + const unsigned char *address = src; + const unsigned char *line = address; + unsigned char c; + + printf("%s | ", prefix); + while (length-- > 0) { + printf("%02X ", *address++); + if (!(++i % line_size) || (length == 0 && i % line_size)) { + if (length == 0) { + while (i++ % line_size) + printf("__ "); + } + printf(" | "); /* right close */ + while (line < address) { + c = *line++; + printf("%c", (c < 33 || c == 255) ? 0x2E : c); + } + printf("\n"); + if (length > 0) + printf("%s | ", prefix); + } + } +} + +/* + * Unescape - process hexadecimal escape character + * converts shell input "\x23" -> 0x23 + */ +static int unescape(char *_dst, char *_src, size_t len) +{ + int ret = 0; + char *src = _src; + char *dst = _dst; + unsigned int ch; + + while (*src) { + if (*src == '\\' && *(src+1) == 'x') { + sscanf(src + 2, "%2x", &ch); + src += 4; + *dst++ = (unsigned char)ch; + } else { + *dst++ = *src++; + } + ret++; + } + return ret; +} + +static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len) +{ + int ret; + + struct spi_ioc_transfer tr = { + .tx_buf = (unsigned long)tx, + .rx_buf = (unsigned long)rx, + .len = len, + .delay_usecs = delay, + .speed_hz = speed, + .bits_per_word = bits, + }; + + if (mode & SPI_TX_QUAD) + tr.tx_nbits = 4; + else if (mode & SPI_TX_DUAL) + tr.tx_nbits = 2; + if (mode & SPI_RX_QUAD) + tr.rx_nbits = 4; + else if (mode & SPI_RX_DUAL) + tr.rx_nbits = 2; + if (!(mode & SPI_LOOP)) { + if (mode & (SPI_TX_QUAD | SPI_TX_DUAL)) + tr.rx_buf = 0; + else if (mode & (SPI_RX_QUAD | SPI_RX_DUAL)) + tr.tx_buf = 0; + } + + ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); + if (ret < 1) + pabort("can't send spi message"); + + if (verbose) + hex_dump(tx, len, 32, "TX"); + hex_dump(rx, len, 32, "RX"); +} + +static void print_usage(const char *prog) +{ + printf("Usage: %s [-DsbdlHOLC3]\n", prog); + puts(" -D --device device to use (default /dev/spidev1.1)\n" + " -s --speed max speed (Hz)\n" + " -d --delay delay (usec)\n" + " -b --bpw bits per word \n" + " -l --loop loopback\n" + " -H --cpha clock phase\n" + " -O --cpol clock polarity\n" + " -L --lsb least significant bit first\n" + " -C --cs-high chip select active high\n" + " -3 --3wire SI/SO signals shared\n" + " -v --verbose Verbose (show tx buffer)\n" + " -p Send data (e.g. \"1234\\xde\\xad\")\n" + " -N --no-cs no chip select\n" + " -R --ready slave pulls low to pause\n" + " -2 --dual dual transfer\n" + " -4 --quad quad transfer\n"); + exit(1); +} + +static void parse_opts(int argc, char *argv[]) +{ + while (1) { + static const struct option lopts[] = { + { "device", 1, 0, 'D' }, + { "speed", 1, 0, 's' }, + { "delay", 1, 0, 'd' }, + { "bpw", 1, 0, 'b' }, + { "loop", 0, 0, 'l' }, + { "cpha", 0, 0, 'H' }, + { "cpol", 0, 0, 'O' }, + { "lsb", 0, 0, 'L' }, + { "cs-high", 0, 0, 'C' }, + { "3wire", 0, 0, '3' }, + { "no-cs", 0, 0, 'N' }, + { "ready", 0, 0, 'R' }, + { "dual", 0, 0, '2' }, + { "verbose", 0, 0, 'v' }, + { "quad", 0, 0, '4' }, + { NULL, 0, 0, 0 }, + }; + int c; + + c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24p:v", lopts, NULL); + + if (c == -1) + break; + + switch (c) { + case 'D': + device = optarg; + break; + case 's': + speed = atoi(optarg); + break; + case 'd': + delay = atoi(optarg); + break; + case 'b': + bits = atoi(optarg); + break; + case 'l': + mode |= SPI_LOOP; + break; + case 'H': + mode |= SPI_CPHA; + break; + case 'O': + mode |= SPI_CPOL; + break; + case 'L': + mode |= SPI_LSB_FIRST; + break; + case 'C': + mode |= SPI_CS_HIGH; + break; + case '3': + mode |= SPI_3WIRE; + break; + case 'N': + mode |= SPI_NO_CS; + break; + case 'v': + verbose = 1; + break; + case 'R': + mode |= SPI_READY; + break; + case 'p': + input_tx = optarg; + break; + case '2': + mode |= SPI_TX_DUAL; + break; + case '4': + mode |= SPI_TX_QUAD; + break; + default: + print_usage(argv[0]); + break; + } + } + if (mode & SPI_LOOP) { + if (mode & SPI_TX_DUAL) + mode |= SPI_RX_DUAL; + if (mode & SPI_TX_QUAD) + mode |= SPI_RX_QUAD; + } +} + +int main(int argc, char *argv[]) +{ + int ret = 0; + int fd; + uint8_t *tx; + uint8_t *rx; + int size; + + parse_opts(argc, argv); + + fd = open(device, O_RDWR); + if (fd < 0) + pabort("can't open device"); + + /* + * spi mode + */ + ret = ioctl(fd, SPI_IOC_WR_MODE32, &mode); + if (ret == -1) + pabort("can't set spi mode"); + + ret = ioctl(fd, SPI_IOC_RD_MODE32, &mode); + if (ret == -1) + pabort("can't get spi mode"); + + /* + * bits per word + */ + ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); + if (ret == -1) + pabort("can't set bits per word"); + + ret = ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits); + if (ret == -1) + pabort("can't get bits per word"); + + /* + * max speed hz + */ + ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); + if (ret == -1) + pabort("can't set max speed hz"); + + ret = ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed); + if (ret == -1) + pabort("can't get max speed hz"); + + printf("spi mode: 0x%x\n", mode); + printf("bits per word: %d\n", bits); + printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); + + if (input_tx) { + size = strlen(input_tx+1); + tx = malloc(size); + rx = malloc(size); + size = unescape((char *)tx, input_tx, size); + transfer(fd, tx, rx, size); + free(rx); + free(tx); + } else { + transfer(fd, default_tx, default_rx, sizeof(default_tx)); + } + + close(fd); + + return ret; +} -- cgit v1.2.3 From 832df9e8ecabec271a0c418bdbb94da826dc5b6d Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 20 Nov 2015 17:53:59 +0900 Subject: extcon: arizona: Update naming for second jack detection DT binding Update the name for the second jack detection pin binding to be a little less confusing. Signed-off-by: Charles Keepax Acked-by: Rob Herring Signed-off-by: Chanwoo Choi --- Documentation/devicetree/bindings/extcon/extcon-arizona.txt | 4 ++-- drivers/extcon/extcon-arizona.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt index 7640a3502c67..8aa0bd430f7b 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt @@ -14,9 +14,9 @@ Optional properties: If this node is not mentioned or if the value is unknown, then headphone detection mode is set to HPDETL. - - wlf,use-jd-gpio : Use GPIO input along with JD1 for dual pin jack + - wlf,use-jd2 : Use the additional JD input along with JD1 for dual pin jack detection. - - wlf,use-jd-gpio-nopull : Internal pull on GPIO is disabled when used for + - wlf,use-jd2-nopull : Internal pull on JD2 is disabled when used for jack detection. - wlf,jd-invert : Invert the polarity of the jack detection switch diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 7c9598db318d..c377030807c4 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -1245,9 +1245,9 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona) device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw); pdata->jd_gpio5 = device_property_read_bool(arizona->dev, - "wlf,use-jd-gpio"); + "wlf,use-jd2"); pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev, - "wlf,use-jd-gpio-nopull"); + "wlf,use-jd2-nopull"); return 0; } -- cgit v1.2.3 From 7a7ef0f2a4b359d0206772bf291781157d07f7dc Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 23 Nov 2015 14:51:30 +0000 Subject: extcon: arizona: Update naming for micd-timeout DT to include units Add time units of -ms (milliseconds) to wlf,micd-timeout. Signed-off-by: Charles Keepax Signed-off-by: Chanwoo Choi --- Documentation/devicetree/bindings/extcon/extcon-arizona.txt | 2 +- drivers/extcon/extcon-arizona.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt index 8aa0bd430f7b..238e10e86a20 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt @@ -33,7 +33,7 @@ Optional properties: specified as per the ARIZONA_MICD_TIME_XXX defines. - wlf,micd-dbtime : Microphone detection hardware debounces specified as the number of measurements to take, valid values being 2 and 4. - - wlf,micd-timeout : Timeout for microphone detection, specified in + - wlf,micd-timeout-ms : Timeout for microphone detection, specified in milliseconds. - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone detection. diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index c377030807c4..86475338e51e 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -1230,7 +1230,7 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona) device_property_read_u32(arizona->dev, "wlf,micd-dbtime", &pdata->micd_dbtime); - device_property_read_u32(arizona->dev, "wlf,micd-timeout", + device_property_read_u32(arizona->dev, "wlf,micd-timeout-ms", &pdata->micd_timeout); pdata->micd_force_micbias = device_property_read_bool(arizona->dev, -- cgit v1.2.3 From 51669f89931d7e07c297fa11028cd1e3a4cef09c Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Mon, 21 Sep 2015 11:25:40 -0500 Subject: Documentation: dt-bindings: Fix interrupt documentation file path Fix the incorrect interrupt documentation file path in binding docs. Signed-off-by: Andrew F. Davis Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt | 2 +- Documentation/devicetree/bindings/mfd/arizona.txt | 2 +- Documentation/devicetree/bindings/mfd/palmas.txt | 2 +- Documentation/devicetree/bindings/sound/wm8994.txt | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt index dd5d2c0394b1..4d6c8cdc8586 100644 --- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt @@ -24,7 +24,7 @@ controller. - #interrupt-cells : Specifies the number of cells needed to encode an interrupt. Shall be set to 2. The first cell defines the interrupt number, the second encodes the triger flags encoded as described in - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupt-parent : The parent interrupt controller. - interrupts : The interrupt to the parent controller raised when GPIOs generate the interrupts. diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 18be0cbfb456..2c5d0387fe98 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -24,7 +24,7 @@ Required properties: - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - gpio-controller : Indicates this device is a GPIO controller. - #gpio-cells : Must be 2. The first cell is the pin number and the diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt index eda898978d33..8ae1a32bfb7e 100644 --- a/Documentation/devicetree/bindings/mfd/palmas.txt +++ b/Documentation/devicetree/bindings/mfd/palmas.txt @@ -24,7 +24,7 @@ and also the generic series names - #interrupt-cells : should be set to 2 for IRQ number and flags The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupt-parent : The parent interrupt controller. Optional properties: diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt index e045e90a0924..68c4e8d96bed 100644 --- a/Documentation/devicetree/bindings/sound/wm8994.txt +++ b/Documentation/devicetree/bindings/sound/wm8994.txt @@ -30,7 +30,7 @@ Optional properties: - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - clocks : A list of up to two phandle and clock specifier pairs - clock-names : A list of clock names sorted in the same order as clocks. -- cgit v1.2.3 From 47caad1577cd7a39e2048c5e4edbce4b863dc12b Mon Sep 17 00:00:00 2001 From: John Garry Date: Wed, 18 Nov 2015 00:50:29 +0800 Subject: devicetree: bindings: scsi: HiSi SAS Add devicetree bindings for HiSilicon SAS driver. Signed-off-by: John Garry Signed-off-by: Zhangfei Gao Acked-by: Rob Herring Reviewed-by: Arnd Bergmann Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- .../devicetree/bindings/scsi/hisilicon-sas.txt | 69 ++++++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt new file mode 100644 index 000000000000..f67e761bcc18 --- /dev/null +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt @@ -0,0 +1,69 @@ +* HiSilicon SAS controller + +The HiSilicon SAS controller supports SAS/SATA. + +Main node required properties: + - compatible : value should be as follows: + (a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset + - sas-addr : array of 8 bytes for host SAS address + - reg : Address and length of the SAS register + - hisilicon,sas-syscon: phandle of syscon used for sas control + - ctrl-reset-reg : offset to controller reset register in ctrl reg + - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg + - ctrl-clock-ena-reg : offset to controller clock enable register in ctrl reg + - queue-count : number of delivery and completion queues in the controller + - phy-count : number of phys accessible by the controller + - interrupts : Interrupts for phys, completion queues, and fatal + sources; the interrupts are ordered in 3 groups, as follows: + - Phy interrupts + - Completion queue interrupts + - Fatal interrupts + Phy interrupts : Each phy has 3 interrupt sources: + - broadcast + - phyup + - abnormal + The phy interrupts are ordered into groups of 3 per phy + (broadcast, phyup, and abnormal) in increasing order. + Completion queue interrupts : each completion queue has 1 + interrupt source. + The interrupts are ordered in increasing order. + Fatal interrupts : the fatal interrupts are ordered as follows: + - ECC + - AXI bus + +Example: + sas0: sas@c1000000 { + compatible = "hisilicon,hip05-sas-v1"; + sas-addr = [50 01 88 20 16 00 00 0a]; + reg = <0x0 0xc1000000 0x0 0x10000>; + hisilicon,sas-syscon = <&pcie_sas>; + ctrl-reset-reg = <0xa60>; + ctrl-reset-sts-reg = <0x5a30>; + ctrl-clock-ena-reg = <0x338>; + queue-count = <32>; + phy-count = <8>; + dma-coherent; + interrupt-parent = <&mbigen_dsa>; + interrupts = <259 4>,<263 4>,<264 4>,/* phy0 */ + <269 4>,<273 4>,<274 4>,/* phy1 */ + <279 4>,<283 4>,<284 4>,/* phy2 */ + <289 4>,<293 4>,<294 4>,/* phy3 */ + <299 4>,<303 4>,<304 4>,/* phy4 */ + <309 4>,<313 4>,<314 4>,/* phy5 */ + <319 4>,<323 4>,<324 4>,/* phy6 */ + <329 4>,<333 4>,<334 4>,/* phy7 */ + <336 1>,<337 1>,<338 1>,/* cq0-2 */ + <339 1>,<340 1>,<341 1>,/* cq3-5 */ + <342 1>,<343 1>,<344 1>,/* cq6-8 */ + <345 1>,<346 1>,<347 1>,/* cq9-11 */ + <348 1>,<349 1>,<350 1>,/* cq12-14 */ + <351 1>,<352 1>,<353 1>,/* cq15-17 */ + <354 1>,<355 1>,<356 1>,/* cq18-20 */ + <357 1>,<358 1>,<359 1>,/* cq21-23 */ + <360 1>,<361 1>,<362 1>,/* cq24-26 */ + <363 1>,<364 1>,<365 1>,/* cq27-29 */ + <366 1>,<367 1>/* cq30-31 */ + <376 4>,/* fatal ecc */ + <381 4>;/* fatal axi */ + status = "disabled"; + }; -- cgit v1.2.3 From ffa52d02c50ea31420dc70869c0b6b439e7cb5ef Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 28 Oct 2015 09:47:58 +0100 Subject: s390/zcore: remove /sys/kernel/debug/zcore/mem New versions of the SCSI dumper use the /dev/vmcore interface instead of zcore mem. Remove the outdated interface. Acked-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- Documentation/s390/zfcpdump.txt | 22 +-- arch/s390/include/asm/lowcore.h | 1 - drivers/s390/char/Makefile | 4 +- drivers/s390/char/zcore.c | 394 +--------------------------------------- 4 files changed, 18 insertions(+), 403 deletions(-) (limited to 'Documentation') diff --git a/Documentation/s390/zfcpdump.txt b/Documentation/s390/zfcpdump.txt index dc929be96016..b064aa59714d 100644 --- a/Documentation/s390/zfcpdump.txt +++ b/Documentation/s390/zfcpdump.txt @@ -15,19 +15,15 @@ the s390-tools package) to make the device bootable. The operator of a Linux system can then trigger a SCSI dump by booting the SCSI disk, where zfcpdump resides on. -The kernel part of zfcpdump is implemented as a debugfs file under "zcore/mem", -which exports memory and registers of the crashed Linux in an s390 -standalone dump format. It can be used in the same way as e.g. /dev/mem. The -dump format defines a 4K header followed by plain uncompressed memory. The -register sets are stored in the prefix pages of the respective CPUs. To build a -dump enabled kernel with the zcore driver, the kernel config option -CONFIG_CRASH_DUMP has to be set. When reading from "zcore/mem", the part of -memory, which has been saved by hardware is read by the driver via the SCLP -hardware interface. The second part is just copied from the non overwritten real -memory. - -Since kernel version 3.12 also the /proc/vmcore file can also be used to access -the dump. +The user space dump tool accesses the memory of the crashed system by means +of the /proc/vmcore interface. This interface exports the crashed system's +memory and registers in ELF core dump format. To access the memory which has +been saved by the hardware SCLP requests will be created at the time the data +is needed by /proc/vmcore. The tail part of the crashed systems memory which +has not been stashed by hardware can just be copied from real memory. + +To build a dump enabled kernel the kernel config option CONFIG_CRASH_DUMP +has to be set. To get a valid zfcpdump kernel configuration use "make zfcpdump_defconfig". diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h index bc618067e725..afe1cfebf1a4 100644 --- a/arch/s390/include/asm/lowcore.h +++ b/arch/s390/include/asm/lowcore.h @@ -35,7 +35,6 @@ struct save_area { struct save_area_ext { struct save_area sa; __vector128 vx_regs[32]; - u64 vx_sa_addr; }; struct _lowcore { diff --git a/drivers/s390/char/Makefile b/drivers/s390/char/Makefile index 6fa9364d1c07..8a2632ba88dc 100644 --- a/drivers/s390/char/Makefile +++ b/drivers/s390/char/Makefile @@ -30,9 +30,7 @@ obj-$(CONFIG_S390_TAPE_3590) += tape_3590.o obj-$(CONFIG_MONREADER) += monreader.o obj-$(CONFIG_MONWRITER) += monwriter.o obj-$(CONFIG_S390_VMUR) += vmur.o - -zcore_mod-objs := sclp_sdias.o zcore.o -obj-$(CONFIG_CRASH_DUMP) += zcore_mod.o +obj-$(CONFIG_CRASH_DUMP) += sclp_sdias.o zcore.o hmcdrv-objs := hmcdrv_mod.o hmcdrv_dev.o hmcdrv_ftp.o hmcdrv_cache.o diag_ftp.o sclp_ftp.o obj-$(CONFIG_HMC_DRV) += hmcdrv.o diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c index e0c87a83eb34..3ad3d538e432 100644 --- a/drivers/s390/char/zcore.c +++ b/drivers/s390/char/zcore.c @@ -43,27 +43,14 @@ enum arch_id { ARCH_S390X = 1, }; -/* dump system info */ - -struct sys_info { - enum arch_id arch; - unsigned long sa_base; - u32 sa_size; - int cpu_map[NR_CPUS]; - unsigned long mem_size; - struct save_area lc_mask; -}; - struct ipib_info { unsigned long ipib; u32 checksum; } __attribute__((packed)); -static struct sys_info sys_info; static struct debug_info *zcore_dbf; static int hsa_available; static struct dentry *zcore_dir; -static struct dentry *zcore_file; static struct dentry *zcore_memmap_file; static struct dentry *zcore_reipl_file; static struct dentry *zcore_hsa_file; @@ -149,171 +136,22 @@ static int memcpy_hsa_kernel(void *dest, unsigned long src, size_t count) return memcpy_hsa(dest, src, count, TO_KERNEL); } -static int __init init_cpu_info(enum arch_id arch) +static int __init init_cpu_info(void) { struct save_area_ext *sa_ext; - struct _lowcore *lc; - void *ptr; - int i; /* get info for boot cpu from lowcore, stored in the HSA */ sa_ext = dump_save_areas.areas[0]; if (!sa_ext) return -ENOMEM; - if (memcpy_hsa_kernel(&sa_ext->sa, sys_info.sa_base, - sys_info.sa_size) < 0) { + if (memcpy_hsa_kernel(&sa_ext->sa, SAVE_AREA_BASE, + sizeof(struct save_area)) < 0) { TRACE("could not copy from HSA\n"); return -EIO; } - if (!MACHINE_HAS_VX) - return 0; - - save_vx_regs_safe(sa_ext->vx_regs); - /* Get address of the vector register save area for each CPU */ - for (i = 0; i < dump_save_areas.count; i++) { - sa_ext = dump_save_areas.areas[i]; - lc = (struct _lowcore *)(unsigned long) sa_ext->sa.pref_reg; - ptr = &lc->vector_save_area_addr; - copy_from_oldmem(&sa_ext->vx_sa_addr, ptr, - sizeof(sa_ext->vx_sa_addr)); - } - return 0; -} - -static DEFINE_MUTEX(zcore_mutex); - -#define DUMP_VERSION 0x5 -#define DUMP_MAGIC 0xa8190173618f23fdULL -#define DUMP_ARCH_S390X 2 -#define DUMP_ARCH_S390 1 -#define HEADER_SIZE 4096 - -/* dump header dumped according to s390 crash dump format */ - -struct zcore_header { - u64 magic; - u32 version; - u32 header_size; - u32 dump_level; - u32 page_size; - u64 mem_size; - u64 mem_start; - u64 mem_end; - u32 num_pages; - u32 pad1; - u64 tod; - struct cpuid cpu_id; - u32 arch_id; - u32 volnr; - u32 build_arch; - u64 rmem_size; - u8 mvdump; - u16 cpu_cnt; - u16 real_cpu_cnt; - u8 end_pad1[0x200-0x061]; - u64 mvdump_sign; - u64 mvdump_zipl_time; - u8 end_pad2[0x800-0x210]; - u32 lc_vec[512]; -} __attribute__((packed,__aligned__(16))); - -static struct zcore_header zcore_header = { - .magic = DUMP_MAGIC, - .version = DUMP_VERSION, - .header_size = 4096, - .dump_level = 0, - .page_size = PAGE_SIZE, - .mem_start = 0, - .build_arch = DUMP_ARCH_S390X, -}; - -/* - * Copy lowcore info to buffer. Use map in order to copy only register parts. - * - * @buf: User buffer - * @sa: Pointer to save area - * @sa_off: Offset in save area to copy - * @len: Number of bytes to copy - */ -static int copy_lc(void __user *buf, void *sa, int sa_off, int len) -{ - int i; - char *lc_mask = (char*)&sys_info.lc_mask; - - for (i = 0; i < len; i++) { - if (!lc_mask[i + sa_off]) - continue; - if (copy_to_user(buf + i, sa + sa_off + i, 1)) - return -EFAULT; - } - return 0; -} - -/* - * Copy lowcores info to memory, if necessary - * - * @buf: User buffer - * @addr: Start address of buffer in dump memory - * @count: Size of buffer - */ -static int zcore_add_lc(char __user *buf, unsigned long start, size_t count) -{ - struct save_area_ext *sa_ext; - struct save_area *sa; - unsigned long end; - int i; - - if (count == 0) - return 0; - - end = start + count; - for (i = 0; i < dump_save_areas.count; i++) { - unsigned long cp_start, cp_end; /* copy range */ - unsigned long sa_start, sa_end; /* save area range */ - unsigned long sa_off, len, buf_off; - - sa_ext = dump_save_areas.areas[i]; - sa = &sa_ext->sa; - - /* Copy the 512 bytes lowcore save area 0x1200 - 0x1400 */ - sa_start = sa->pref_reg + sys_info.sa_base; - sa_end = sa_start + sys_info.sa_size; - - if (end >= sa_start && start < sa_end) { - cp_start = max(start, sa_start); - cp_end = min(end, sa_end); - buf_off = cp_start - start; - sa_off = cp_start - sa_start; - len = cp_end - cp_start; - - TRACE("copy_lc: %lx-%lx\n", cp_start, cp_end); - if (copy_lc(buf + buf_off, sa, sa_off, len)) - return -EFAULT; - } - - if (!MACHINE_HAS_VX) - continue; - - /* Copy the 512 bytes vector save area */ - sa_start = sa_ext->vx_sa_addr & -1024UL; - sa_end = sa_start + 512; - - if (end >= sa_start && start < sa_end) { - cp_start = max(start, sa_start); - cp_end = min(end, sa_end); - - buf_off = cp_start - start; - sa_off = cp_start - sa_start; - len = cp_end - cp_start; - - TRACE("copy vxrs: %lx-%lx\n", cp_start, cp_end); - if (copy_to_user(buf + buf_off, - (void *) &sa_ext->vx_regs + sa_off, - len)) - return -EFAULT; - } - } + if (MACHINE_HAS_VX) + save_vx_regs_safe(sa_ext->vx_regs); return 0; } @@ -326,126 +164,6 @@ static void release_hsa(void) hsa_available = 0; } -/* - * Read routine for zcore character device - * First 4K are dump header - * Next 32MB are HSA Memory - * Rest is read from absolute Memory - */ -static ssize_t zcore_read(struct file *file, char __user *buf, size_t count, - loff_t *ppos) -{ - unsigned long mem_start; /* Start address in memory */ - size_t mem_offs; /* Offset in dump memory */ - size_t hdr_count; /* Size of header part of output buffer */ - size_t size; - int rc; - - mutex_lock(&zcore_mutex); - - if (*ppos > (sys_info.mem_size + HEADER_SIZE)) { - rc = -EINVAL; - goto fail; - } - - count = min(count, (size_t) (sys_info.mem_size + HEADER_SIZE - *ppos)); - - /* Copy dump header */ - if (*ppos < HEADER_SIZE) { - size = min(count, (size_t) (HEADER_SIZE - *ppos)); - if (copy_to_user(buf, &zcore_header + *ppos, size)) { - rc = -EFAULT; - goto fail; - } - hdr_count = size; - mem_start = 0; - } else { - hdr_count = 0; - mem_start = *ppos - HEADER_SIZE; - } - - mem_offs = 0; - - /* Copy from HSA data */ - if (*ppos < sclp.hsa_size + HEADER_SIZE) { - size = min((count - hdr_count), - (size_t) (sclp.hsa_size - mem_start)); - rc = memcpy_hsa_user(buf + hdr_count, mem_start, size); - if (rc) - goto fail; - - mem_offs += size; - } - - /* Copy from real mem */ - size = count - mem_offs - hdr_count; - rc = copy_to_user_real(buf + hdr_count + mem_offs, - (void *) mem_start + mem_offs, size); - if (rc) - goto fail; - - /* - * Since s390 dump analysis tools like lcrash or crash - * expect register sets in the prefix pages of the cpus, - * we copy them into the read buffer, if necessary. - * buf + hdr_count: Start of memory part of output buffer - * mem_start: Start memory address to copy from - * count - hdr_count: Size of memory area to copy - */ - if (zcore_add_lc(buf + hdr_count, mem_start, count - hdr_count)) { - rc = -EFAULT; - goto fail; - } - *ppos += count; -fail: - mutex_unlock(&zcore_mutex); - return (rc < 0) ? rc : count; -} - -static int zcore_open(struct inode *inode, struct file *filp) -{ - if (!hsa_available) - return -ENODATA; - else - return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; -} - -static int zcore_release(struct inode *inode, struct file *filep) -{ - if (hsa_available) - release_hsa(); - return 0; -} - -static loff_t zcore_lseek(struct file *file, loff_t offset, int orig) -{ - loff_t rc; - - mutex_lock(&zcore_mutex); - switch (orig) { - case 0: - file->f_pos = offset; - rc = file->f_pos; - break; - case 1: - file->f_pos += offset; - rc = file->f_pos; - break; - default: - rc = -EINVAL; - } - mutex_unlock(&zcore_mutex); - return rc; -} - -static const struct file_operations zcore_fops = { - .owner = THIS_MODULE, - .llseek = zcore_lseek, - .read = zcore_read, - .open = zcore_open, - .release = zcore_release, -}; - static ssize_t zcore_memmap_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos) { @@ -549,50 +267,6 @@ static const struct file_operations zcore_hsa_fops = { .llseek = no_llseek, }; -static void __init set_lc_mask(struct save_area *map) -{ - memset(&map->fp_regs, 0xff, sizeof(map->fp_regs)); - memset(&map->gp_regs, 0xff, sizeof(map->gp_regs)); - memset(&map->psw, 0xff, sizeof(map->psw)); - memset(&map->pref_reg, 0xff, sizeof(map->pref_reg)); - memset(&map->fp_ctrl_reg, 0xff, sizeof(map->fp_ctrl_reg)); - memset(&map->tod_reg, 0xff, sizeof(map->tod_reg)); - memset(&map->timer, 0xff, sizeof(map->timer)); - memset(&map->clk_cmp, 0xff, sizeof(map->clk_cmp)); - memset(&map->acc_regs, 0xff, sizeof(map->acc_regs)); - memset(&map->ctrl_regs, 0xff, sizeof(map->ctrl_regs)); -} - -/* - * Initialize dump globals for a given architecture - */ -static int __init sys_info_init(enum arch_id arch, unsigned long mem_end) -{ - int rc; - - switch (arch) { - case ARCH_S390X: - pr_alert("DETECTED 'S390X (64 bit) OS'\n"); - break; - case ARCH_S390: - pr_alert("DETECTED 'S390 (32 bit) OS'\n"); - break; - default: - pr_alert("0x%x is an unknown architecture.\n",arch); - return -EINVAL; - } - sys_info.sa_base = SAVE_AREA_BASE; - sys_info.sa_size = sizeof(struct save_area); - sys_info.arch = arch; - set_lc_mask(&sys_info.lc_mask); - rc = init_cpu_info(arch); - if (rc) - return rc; - sys_info.mem_size = mem_end; - - return 0; -} - static int __init check_sdias(void) { if (!sclp.hsa_size) { @@ -602,43 +276,6 @@ static int __init check_sdias(void) return 0; } -static int __init get_mem_info(unsigned long *mem, unsigned long *end) -{ - struct memblock_region *reg; - - for_each_memblock(memory, reg) { - *mem += reg->size; - *end = max_t(unsigned long, *end, reg->base + reg->size); - } - return 0; -} - -static void __init zcore_header_init(int arch, struct zcore_header *hdr, - unsigned long mem_size) -{ - u32 prefix; - int i; - - if (arch == ARCH_S390X) - hdr->arch_id = DUMP_ARCH_S390X; - else - hdr->arch_id = DUMP_ARCH_S390; - hdr->mem_size = mem_size; - hdr->rmem_size = mem_size; - hdr->mem_end = sys_info.mem_size; - hdr->num_pages = mem_size / PAGE_SIZE; - hdr->tod = get_tod_clock(); - get_cpu_id(&hdr->cpu_id); - for (i = 0; i < dump_save_areas.count; i++) { - prefix = dump_save_areas.areas[i]->sa.pref_reg; - hdr->real_cpu_cnt++; - if (!prefix) - continue; - hdr->lc_vec[hdr->cpu_cnt] = prefix; - hdr->cpu_cnt++; - } -} - /* * Provide IPL parameter information block from either HSA or memory * for future reipl @@ -671,11 +308,9 @@ static int __init zcore_reipl_init(void) static int __init zcore_init(void) { - unsigned long mem_size, mem_end; unsigned char arch; int rc; - mem_size = mem_end = 0; if (ipl_info.type != IPL_TYPE_FCP_DUMP) return -ENODATA; if (OLDMEM_BASE) @@ -709,15 +344,11 @@ static int __init zcore_init(void) goto fail; } - rc = get_mem_info(&mem_size, &mem_end); + pr_alert("DETECTED 'S390X (64 bit) OS'\n"); + rc = init_cpu_info(); if (rc) goto fail; - rc = sys_info_init(arch, mem_end); - if (rc) - goto fail; - zcore_header_init(arch, &zcore_header, mem_size); - rc = zcore_reipl_init(); if (rc) goto fail; @@ -727,17 +358,11 @@ static int __init zcore_init(void) rc = -ENOMEM; goto fail; } - zcore_file = debugfs_create_file("mem", S_IRUSR, zcore_dir, NULL, - &zcore_fops); - if (!zcore_file) { - rc = -ENOMEM; - goto fail_dir; - } zcore_memmap_file = debugfs_create_file("memmap", S_IRUSR, zcore_dir, NULL, &zcore_memmap_fops); if (!zcore_memmap_file) { rc = -ENOMEM; - goto fail_file; + goto fail_dir; } zcore_reipl_file = debugfs_create_file("reipl", S_IRUSR, zcore_dir, NULL, &zcore_reipl_fops); @@ -757,8 +382,6 @@ fail_reipl_file: debugfs_remove(zcore_reipl_file); fail_memmap_file: debugfs_remove(zcore_memmap_file); -fail_file: - debugfs_remove(zcore_file); fail_dir: debugfs_remove(zcore_dir); fail: @@ -774,7 +397,6 @@ static void __exit zcore_exit(void) debugfs_remove(zcore_hsa_file); debugfs_remove(zcore_reipl_file); debugfs_remove(zcore_memmap_file); - debugfs_remove(zcore_file); debugfs_remove(zcore_dir); diag308(DIAG308_REL_HSA, NULL); } -- cgit v1.2.3 From eaea7d27129b9b493c3029608486c157827a92ce Mon Sep 17 00:00:00 2001 From: Milo Kim Date: Thu, 26 Nov 2015 15:57:00 +0900 Subject: regulator: lm363x: add LM363x regulator binding information This binding describes LM3631 and LM3632 regulator properties. Signed-off-by: Milo Kim Signed-off-by: Mark Brown --- .../bindings/regulator/lm363x-regulator.txt | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/lm363x-regulator.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt new file mode 100644 index 000000000000..8f14df9d1205 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt @@ -0,0 +1,34 @@ +TI LMU LM363x regulator device tree bindings + +LM363x regulator driver supports LM3631 and LM3632. +LM3631 has five regulators and LM3632 supports three regulators. + +Required property: + - compatible: "ti,lm363x-regulator" + +Optional properties: + LM3632 has external enable pins for two LDOs. + - ti,lcm-en1-gpio: A GPIO specifier for Vpos control pin. + - ti,lcm-en2-gpio: A GPIO specifier for Vneg control pin. + +Child nodes: + LM3631 + - vboost + - vcont + - voref + - vpos + - vneg + + LM3632 + - vboost + - vpos + - vneg + + Optional properties of a child node: + Each sub-node should contain the constraints and initialization. + Please refer to [1]. + +Examples: Please refer to ti-lmu dt-bindings [2]. + +[1] ../regulator/regulator.txt +[2] ../mfd/ti-lmu.txt -- cgit v1.2.3 From 0f73f3e85757091f40019b71077b41a717182b29 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 30 Oct 2015 10:00:37 +0200 Subject: dmaengine: ti-dma-crossbar: dra7: Support for reserving DMA event ranges In eDMA the events are directly mapped to a DMA channel (for example DMA event 14 can only be handled by DMA channel 14). If the memcpy is enabled on the eDMA, there is a possibility that the crossbar driver would assign DMA event number already allocated in eDMA for memcpy. Furthermore the eDMA can be shared with DSP in which case the crossbar driver should also avoid mapping xbar events to DSP used event numbers (or channels). Signed-off-by: Peter Ujfalusi Signed-off-by: Vinod Koul --- .../devicetree/bindings/dma/ti-dma-crossbar.txt | 6 +++ drivers/dma/ti-dma-crossbar.c | 47 ++++++++++++++++++++-- 2 files changed, 49 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt index b152a75dceae..aead5869a28d 100644 --- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt +++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt @@ -14,6 +14,10 @@ The DMA controller node need to have the following poroperties: Optional properties: - ti,dma-safe-map: Safe routing value for unused request lines +- ti,reserved-dma-request-ranges: DMA request ranges which should not be used + when mapping xbar input to DMA request, they are either + allocated to be used by for example the DSP or they are used as + memcpy channels in eDMA. Notes: When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request @@ -46,6 +50,8 @@ sdma_xbar: dma-router@4a002b78 { #dma-cells = <1>; dma-requests = <205>; ti,dma-safe-map = <0>; + /* Protect the sDMA request ranges: 10-14 and 100-126 */ + ti,reserved-dma-request-ranges = <10 5>, <100 27>; dma-masters = <&sdma>; }; diff --git a/drivers/dma/ti-dma-crossbar.c b/drivers/dma/ti-dma-crossbar.c index 7b1e3ea874bf..e107779b1a2e 100644 --- a/drivers/dma/ti-dma-crossbar.c +++ b/drivers/dma/ti-dma-crossbar.c @@ -296,14 +296,22 @@ static const struct of_device_id ti_dra7_master_match[] = { {}, }; +static inline void ti_dra7_xbar_reserve(int offset, int len, unsigned long *p) +{ + for (; len > 0; len--) + clear_bit(offset + (len - 1), p); +} + static int ti_dra7_xbar_probe(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; const struct of_device_id *match; struct device_node *dma_node; struct ti_dra7_xbar_data *xbar; + struct property *prop; struct resource *res; u32 safe_val; + size_t sz; void __iomem *iomem; int i, ret; @@ -351,6 +359,33 @@ static int ti_dra7_xbar_probe(struct platform_device *pdev) if (!of_property_read_u32(node, "ti,dma-safe-map", &safe_val)) xbar->safe_val = (u16)safe_val; + + prop = of_find_property(node, "ti,reserved-dma-request-ranges", &sz); + if (prop) { + const char pname[] = "ti,reserved-dma-request-ranges"; + u32 (*rsv_events)[2]; + size_t nelm = sz / sizeof(*rsv_events); + int i; + + if (!nelm) + return -EINVAL; + + rsv_events = kcalloc(nelm, sizeof(*rsv_events), GFP_KERNEL); + if (!rsv_events) + return -ENOMEM; + + ret = of_property_read_u32_array(node, pname, (u32 *)rsv_events, + nelm * 2); + if (ret) + return ret; + + for (i = 0; i < nelm; i++) { + ti_dra7_xbar_reserve(rsv_events[i][0], rsv_events[i][1], + xbar->dma_inuse); + } + kfree(rsv_events); + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); iomem = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(iomem)) @@ -366,15 +401,19 @@ static int ti_dra7_xbar_probe(struct platform_device *pdev) platform_set_drvdata(pdev, xbar); /* Reset the crossbar */ - for (i = 0; i < xbar->dma_requests; i++) - ti_dra7_xbar_write(xbar->iomem, i, xbar->safe_val); + for (i = 0; i < xbar->dma_requests; i++) { + if (!test_bit(i, xbar->dma_inuse)) + ti_dra7_xbar_write(xbar->iomem, i, xbar->safe_val); + } ret = of_dma_router_register(node, ti_dra7_xbar_route_allocate, &xbar->dmarouter); if (ret) { /* Restore the defaults for the crossbar */ - for (i = 0; i < xbar->dma_requests; i++) - ti_dra7_xbar_write(xbar->iomem, i, i); + for (i = 0; i < xbar->dma_requests; i++) { + if (!test_bit(i, xbar->dma_inuse)) + ti_dra7_xbar_write(xbar->iomem, i, i); + } } return ret; -- cgit v1.2.3 From de2c6e58554c7df3db70c68e52f982e558895ecf Mon Sep 17 00:00:00 2001 From: Joshua Clayton Date: Sat, 28 Nov 2015 13:28:18 -0800 Subject: spi: tools: move spidev_test metadata Now that spidev_test and spidev_fdx have been moved, remove them from the Documentation index and move their .gitignore file. Signed-off-by: Joshua Clayton Signed-off-by: Mark Brown --- Documentation/spi/.gitignore | 2 -- Documentation/spi/00-INDEX | 4 ---- tools/spi/.gitignore | 2 ++ 3 files changed, 2 insertions(+), 6 deletions(-) delete mode 100644 Documentation/spi/.gitignore create mode 100644 tools/spi/.gitignore (limited to 'Documentation') diff --git a/Documentation/spi/.gitignore b/Documentation/spi/.gitignore deleted file mode 100644 index 4280576397e8..000000000000 --- a/Documentation/spi/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -spidev_fdx -spidev_test diff --git a/Documentation/spi/00-INDEX b/Documentation/spi/00-INDEX index a128fa835512..4644bf0d9832 100644 --- a/Documentation/spi/00-INDEX +++ b/Documentation/spi/00-INDEX @@ -10,13 +10,9 @@ pxa2xx - PXA2xx SPI master controller build by spi_message fifo wq spidev - Intro to the userspace API for spi devices -spidev_fdx.c - - spidev example file spi-lm70llp - Connecting an LM70-LLP sensor to the kernel via the SPI subsys. spi-sc18is602 - NXP SC18IS602/603 I2C-bus to SPI bridge spi-summary - (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here. -spidev_test.c - - SPI testing utility. diff --git a/tools/spi/.gitignore b/tools/spi/.gitignore new file mode 100644 index 000000000000..4280576397e8 --- /dev/null +++ b/tools/spi/.gitignore @@ -0,0 +1,2 @@ +spidev_fdx +spidev_test -- cgit v1.2.3 From ec7f9eb4bea26b627cb5f15ebbfb5b06f969511d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 30 Nov 2015 15:14:00 +0100 Subject: spi: sh-msiof: Add support for SH-Mobile AG5 MSIOF in SH-Mobile AG5 (sh73a0) is handled fine by the existing driver. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/sh-msiof.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 705075da2f10..aa005c1d10d9 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -10,6 +10,7 @@ Required properties: "renesas,msiof-r8a7792" (R-Car V2H) "renesas,msiof-r8a7793" (R-Car M2-N) "renesas,msiof-r8a7794" (R-Car E2) + "renesas,msiof-sh73a0" (SH-Mobile AG5) - reg : A list of offsets and lengths of the register sets for the device. If only one register set is present, it is to be used -- cgit v1.2.3 From 3eb5d5888dc68c9b187998ca4249b8b9fa481eeb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 29 Oct 2015 11:44:06 +1100 Subject: powerpc: Add ppc_strict_facility_enable boot option Add a boot option that strictly manages the MSR unavailable bits. This catches kernel uses of FP/Altivec/SPE that would otherwise corrupt user state. Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman --- Documentation/kernel-parameters.txt | 6 ++++++ arch/powerpc/include/asm/reg.h | 9 +++++++++ arch/powerpc/include/asm/switch_to.h | 24 +++++++++++++++++++----- arch/powerpc/kernel/process.c | 17 +++++++++++++++-- 4 files changed, 49 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 742f69d18fc8..8978c26cacdd 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2978,6 +2978,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. may be specified. Format: ,.... + ppc_strict_facility_enable + [PPC] This option catches any kernel floating point, + Altivec, VSX and SPE outside of regions specifically + allowed (eg kernel_enable_fpu()/kernel_disable_fpu()). + There is some performance impact when enabling this. + print-fatal-signals= [KNL] debug: print fatal signals diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 987dac090244..eb2986e60c50 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1214,6 +1214,15 @@ static inline void mtmsr_isync(unsigned long val) : "r" ((unsigned long)(v)) \ : "memory") +extern void msr_check_and_set(unsigned long bits); +extern bool strict_msr_control; +extern void __msr_check_and_clear(unsigned long bits); +static inline void msr_check_and_clear(unsigned long bits) +{ + if (strict_msr_control) + __msr_check_and_clear(bits); +} + static inline unsigned long mfvtb (void) { #ifdef CONFIG_PPC_BOOK3S_64 diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h index 438502f59550..9414dcb180d6 100644 --- a/arch/powerpc/include/asm/switch_to.h +++ b/arch/powerpc/include/asm/switch_to.h @@ -4,6 +4,8 @@ #ifndef _ASM_POWERPC_SWITCH_TO_H #define _ASM_POWERPC_SWITCH_TO_H +#include + struct thread_struct; struct task_struct; struct pt_regs; @@ -26,15 +28,15 @@ extern void enable_kernel_spe(void); extern void load_up_spe(struct task_struct *); extern void switch_booke_debug_regs(struct debug_reg *new_debug); -static inline void disable_kernel_fp(void) { } -static inline void disable_kernel_altivec(void) { } -static inline void disable_kernel_spe(void) { } -static inline void disable_kernel_vsx(void) { } - #ifdef CONFIG_PPC_FPU extern void flush_fp_to_thread(struct task_struct *); extern void giveup_fpu(struct task_struct *); extern void __giveup_fpu(struct task_struct *); +static inline void disable_kernel_fp(void) +{ + msr_check_and_clear(MSR_FP); +} + #else static inline void flush_fp_to_thread(struct task_struct *t) { } static inline void giveup_fpu(struct task_struct *t) { } @@ -45,6 +47,10 @@ static inline void __giveup_fpu(struct task_struct *t) { } extern void flush_altivec_to_thread(struct task_struct *); extern void giveup_altivec(struct task_struct *); extern void __giveup_altivec(struct task_struct *); +static inline void disable_kernel_altivec(void) +{ + msr_check_and_clear(MSR_VEC); +} #else static inline void flush_altivec_to_thread(struct task_struct *t) { } static inline void giveup_altivec(struct task_struct *t) { } @@ -53,6 +59,10 @@ static inline void __giveup_altivec(struct task_struct *t) { } #ifdef CONFIG_VSX extern void flush_vsx_to_thread(struct task_struct *); +static inline void disable_kernel_vsx(void) +{ + msr_check_and_clear(MSR_FP|MSR_VEC|MSR_VSX); +} #else static inline void flush_vsx_to_thread(struct task_struct *t) { @@ -63,6 +73,10 @@ static inline void flush_vsx_to_thread(struct task_struct *t) extern void flush_spe_to_thread(struct task_struct *); extern void giveup_spe(struct task_struct *); extern void __giveup_spe(struct task_struct *); +static inline void disable_kernel_spe(void) +{ + msr_check_and_clear(MSR_SPE); +} #else static inline void flush_spe_to_thread(struct task_struct *t) { } static inline void giveup_spe(struct task_struct *t) { } diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 5cdd35c0b026..1eafceefeac9 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -87,7 +87,19 @@ static void check_if_tm_restore_required(struct task_struct *tsk) static inline void check_if_tm_restore_required(struct task_struct *tsk) { } #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ -static void msr_check_and_set(unsigned long bits) +bool strict_msr_control; +EXPORT_SYMBOL(strict_msr_control); + +static int __init enable_strict_msr_control(char *str) +{ + strict_msr_control = true; + pr_info("Enabling strict facility control\n"); + + return 0; +} +early_param("ppc_strict_facility_enable", enable_strict_msr_control); + +void msr_check_and_set(unsigned long bits) { unsigned long oldmsr = mfmsr(); unsigned long newmsr; @@ -103,7 +115,7 @@ static void msr_check_and_set(unsigned long bits) mtmsr_isync(newmsr); } -static void msr_check_and_clear(unsigned long bits) +void __msr_check_and_clear(unsigned long bits) { unsigned long oldmsr = mfmsr(); unsigned long newmsr; @@ -118,6 +130,7 @@ static void msr_check_and_clear(unsigned long bits) if (oldmsr != newmsr) mtmsr_isync(newmsr); } +EXPORT_SYMBOL(__msr_check_and_clear); #ifdef CONFIG_PPC_FPU void giveup_fpu(struct task_struct *tsk) -- cgit v1.2.3 From 0290cc9f044a4d24d9a64e81761ac84498dc9d73 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 20 Nov 2015 13:53:22 -0500 Subject: USB: limit usbfs snooping of URB contents The usbfs_snoop facility can be very useful for debugging problems involving usbfs. However, it always prints out the entire contents of every URB. When dealing with large quantities of data, this can be less than helpful. This patch ameliorates the situation by adding a module parameter to usbcore for controlling the maximum number of bytes to print when snooping an URB. This makes debugging much easier. For backward compatibility, the default value is set unreasonably high. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 4 ++++ drivers/usb/core/devio.c | 9 ++++++++- 2 files changed, 12 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 742f69d18fc8..e6b6e056cc11 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3874,6 +3874,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. usbcore.usbfs_snoop= [USB] Set to log all usbfs traffic (default 0 = off). + usbcore.usbfs_snoop_max= + [USB] Maximum number of bytes to snoop in each URB + (default = 65536). + usbcore.blinkenlights= [USB] Set to cycle leds on hubs (default 0 = off). diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 38ae877c46e3..3d41faf6e607 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -100,6 +100,11 @@ static bool usbfs_snoop; module_param(usbfs_snoop, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic"); +static unsigned usbfs_snoop_max = 65536; +module_param(usbfs_snoop_max, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(usbfs_snoop_max, + "maximum number of bytes to print while snooping"); + #define snoop(dev, format, arg...) \ do { \ if (usbfs_snoop) \ @@ -392,6 +397,7 @@ static void snoop_urb(struct usb_device *udev, ep, t, d, length, timeout_or_status); } + data_len = min(data_len, usbfs_snoop_max); if (data && data_len > 0) { print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1, data, data_len, 1); @@ -402,7 +408,8 @@ static void snoop_urb_data(struct urb *urb, unsigned len) { int i, size; - if (!usbfs_snoop) + len = min(len, usbfs_snoop_max); + if (!usbfs_snoop || len == 0) return; if (urb->num_sgs == 0) { -- cgit v1.2.3 From 82487b714858d99feff600a096177675481a4935 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 24 Nov 2015 13:09:52 +0200 Subject: usb: host: xhci-plat: add support for the R-Car M2-N xHCI controller This patch adds support for R-Car M2-N (r8a7793) xHCI controller. This SoC is compatible with R-Car H2 (r8a7790) and R-Car M2-W (r8a7791). Signed-off-by: Yoshihiro Shimoda Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/usb-xhci.txt | 4 ++-- drivers/usb/host/xhci-plat.c | 3 +++ 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 86f67f0886bc..106299ad3807 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -3,8 +3,8 @@ USB xHCI controllers Required properties: - compatible: should be one of "generic-xhci", "marvell,armada-375-xhci", "marvell,armada-380-xhci", - "renesas,xhci-r8a7790", "renesas,xhci-r8a7791" (deprecated: - "xhci-platform"). + "renesas,xhci-r8a7790", "renesas,xhci-r8a7791", "renesas,xhci-r8a7793" + (deprecated: "xhci-platform"). - reg: should contain address and length of the standard XHCI register set for the device. - interrupts: one XHCI interrupt should be described here. diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index a471f12ffa46..0113e79c74cb 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -96,6 +96,9 @@ static const struct of_device_id usb_xhci_of_match[] = { }, { .compatible = "renesas,xhci-r8a7791", .data = &xhci_plat_renesas_rcar_gen2, + }, { + .compatible = "renesas,xhci-r8a7793", + .data = &xhci_plat_renesas_rcar_gen2, }, { }, }; -- cgit v1.2.3 From 526a240f6145fa54658a4d56327f3e053ac73c48 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 24 Nov 2015 13:09:53 +0200 Subject: usb: host: xhci-plat: add support for the R-Car H3 xHCI controllers The R-Car H3 has two xHCI controllers. This SoC is compatible with R-Car Gen2 SoCs, however this SoC doesn't need some specific registers setting, and need a new firmware. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/usb-xhci.txt | 4 ++-- drivers/usb/host/xhci-plat.c | 14 ++++++++++++-- drivers/usb/host/xhci-plat.h | 1 + drivers/usb/host/xhci-rcar.c | 7 +++++++ drivers/usb/host/xhci-rcar.h | 1 + 5 files changed, 23 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 106299ad3807..082573289f1e 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -3,8 +3,8 @@ USB xHCI controllers Required properties: - compatible: should be one of "generic-xhci", "marvell,armada-375-xhci", "marvell,armada-380-xhci", - "renesas,xhci-r8a7790", "renesas,xhci-r8a7791", "renesas,xhci-r8a7793" - (deprecated: "xhci-platform"). + "renesas,xhci-r8a7790", "renesas,xhci-r8a7791", "renesas,xhci-r8a7793", + "renesas,xhci-r8a7795" (deprecated: "xhci-platform"). - reg: should contain address and length of the standard XHCI register set for the device. - interrupts: one XHCI interrupt should be described here. diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 0113e79c74cb..770b6b088797 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -52,7 +52,8 @@ static int xhci_plat_setup(struct usb_hcd *hcd) { int ret; - if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2)) { + if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) || + xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3)) { ret = xhci_rcar_init_quirk(hcd); if (ret) return ret; @@ -63,7 +64,8 @@ static int xhci_plat_setup(struct usb_hcd *hcd) static int xhci_plat_start(struct usb_hcd *hcd) { - if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2)) + if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) || + xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3)) xhci_rcar_start(hcd); return xhci_run(hcd); @@ -79,6 +81,11 @@ static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, }; +static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { + .type = XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3, + .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2, +}; + static const struct of_device_id usb_xhci_of_match[] = { { .compatible = "generic-xhci", @@ -99,6 +106,9 @@ static const struct of_device_id usb_xhci_of_match[] = { }, { .compatible = "renesas,xhci-r8a7793", .data = &xhci_plat_renesas_rcar_gen2, + }, { + .compatible = "renesas,xhci-r8a7795", + .data = &xhci_plat_renesas_rcar_gen3, }, { }, }; diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h index 20b32a749398..5a2e2e3936c4 100644 --- a/drivers/usb/host/xhci-plat.h +++ b/drivers/usb/host/xhci-plat.h @@ -16,6 +16,7 @@ enum xhci_plat_type { XHCI_PLAT_TYPE_MARVELL_ARMADA, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2, + XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3, }; struct xhci_plat_priv { diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 010a24fdaa59..623100e9385e 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -17,7 +17,14 @@ #include "xhci-plat.h" #include "xhci-rcar.h" +/* +* - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes +* performance degradation. So, this driver continues to use the V1 if R-Car +* Gen2. +* - The V1 firmware is impossible to use on R-Car Gen3. +*/ MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1); +MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2); /*** Register Offset ***/ #define RCAR_USB3_INT_ENA 0x224 /* Interrupt Enable */ diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h index ba3ad31e702a..2941a25cfe98 100644 --- a/drivers/usb/host/xhci-rcar.h +++ b/drivers/usb/host/xhci-rcar.h @@ -12,6 +12,7 @@ #define _XHCI_RCAR_H #define XHCI_RCAR_FIRMWARE_NAME_V1 "r8a779x_usb3_v1.dlmem" +#define XHCI_RCAR_FIRMWARE_NAME_V2 "r8a779x_usb3_v2.dlmem" #if IS_ENABLED(CONFIG_USB_XHCI_RCAR) void xhci_rcar_start(struct usb_hcd *hcd); -- cgit v1.2.3 From c74732e3c5f02b09ad839238622a8bd4fad75f84 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Tue, 24 Nov 2015 13:09:54 +0200 Subject: dt-bindings: Add a binding for Mediatek xHCI host controller add a DT binding documentation of xHCI host controller for the MT8173 SoC from Mediatek. Signed-off-by: Chunfeng Yun Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/usb/mt8173-xhci.txt | 51 ++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt new file mode 100644 index 000000000000..b3a7ffa48852 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt @@ -0,0 +1,51 @@ +MT8173 xHCI + +The device node for Mediatek SOC USB3.0 host controller + +Required properties: + - compatible : should contain "mediatek,mt8173-xhci" + - reg : specifies physical base address and size of the registers, + the first one for MAC, the second for IPPC + - interrupts : interrupt used by the controller + - power-domains : a phandle to USB power domain node to control USB's + mtcmos + - vusb33-supply : regulator of USB avdd3.3v + + - clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names + - clock-names : must contain + "sys_ck": for clock of xHCI MAC + "wakeup_deb_p0": for USB wakeup debounce clock of port0 + "wakeup_deb_p1": for USB wakeup debounce clock of port1 + + - phys : a list of phandle + phy specifier pairs + +Optional properties: + - mediatek,wakeup-src : 1: ip sleep wakeup mode; 2: line state wakeup + mode; + - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup + control register, it depends on "mediatek,wakeup-src". + - vbus-supply : reference to the VBUS regulator; + - usb3-lpm-capable : supports USB3.0 LPM + +Example: +usb30: usb@11270000 { + compatible = "mediatek,mt8173-xhci"; + reg = <0 0x11270000 0 0x1000>, + <0 0x11280700 0 0x0100>; + interrupts = ; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, + <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB1>; + clock-names = "sys_ck", + "wakeup_deb_p0", + "wakeup_deb_p1"; + phys = <&phy_port0 PHY_TYPE_USB3>, + <&phy_port1 PHY_TYPE_USB2>; + vusb33-supply = <&mt6397_vusb_reg>; + vbus-supply = <&usb_p1_vbus>; + usb3-lpm-capable; + mediatek,syscon-wakeup = <&pericfg>; + mediatek,wakeup-src = <1>; +}; -- cgit v1.2.3 From bf5ce5bf3cc7136fd7fe5e8999a580bc93a9c8f6 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Sat, 14 Nov 2015 16:26:32 +0800 Subject: usb: core: lpm: fix usb3_hardware_lpm sysfs node Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM") introduced usb3_hardware_lpm sysfs node. This doesn't show the correct status of USB3 U1 and U2 LPM status. This patch fixes this by replacing usb3_hardware_lpm with two nodes, usb3_hardware_lpm_u1 (for U1) and usb3_hardware_lpm_u2 (for U2), and recording the U1/U2 LPM status in right places. This patch should be back-ported to kernels as old as 4.3, that contains Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM"). Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/testing/sysfs-bus-usb | 16 ++++++++------ Documentation/usb/power-management.txt | 11 +++++----- drivers/usb/core/hub.c | 39 +++++++++++++++++++++++++-------- drivers/usb/core/sysfs.c | 31 +++++++++++++++++++++----- include/linux/usb.h | 4 ++++ 5 files changed, 75 insertions(+), 26 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 3a4abfc44f5e..136ba17d2da0 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -134,19 +134,21 @@ Description: enabled for the device. Developer can write y/Y/1 or n/N/0 to the file to enable/disable the feature. -What: /sys/bus/usb/devices/.../power/usb3_hardware_lpm -Date: June 2015 +What: /sys/bus/usb/devices/.../power/usb3_hardware_lpm_u1 + /sys/bus/usb/devices/.../power/usb3_hardware_lpm_u2 +Date: November 2015 Contact: Kevin Strasser + Lu Baolu Description: If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged in to a xHCI host which supports link PM, it will check if U1 and U2 exit latencies have been set in the BOS descriptor; if - the check is is passed and the host supports USB3 hardware LPM, + the check is passed and the host supports USB3 hardware LPM, USB3 hardware LPM will be enabled for the device and the USB - device directory will contain a file named - power/usb3_hardware_lpm. The file holds a string value (enable - or disable) indicating whether or not USB3 hardware LPM is - enabled for the device. + device directory will contain two files named + power/usb3_hardware_lpm_u1 and power/usb3_hardware_lpm_u2. These + files hold a string value (enable or disable) indicating whether + or not USB3 hardware LPM U1 or U2 is enabled for the device. What: /sys/bus/usb/devices/.../removable Date: February 2012 diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index 4a15c90bc11d..0a94ffe17ab6 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -537,17 +537,18 @@ relevant attribute files are usb2_hardware_lpm and usb3_hardware_lpm. can write y/Y/1 or n/N/0 to the file to enable/disable USB2 hardware LPM manually. This is for test purpose mainly. - power/usb3_hardware_lpm + power/usb3_hardware_lpm_u1 + power/usb3_hardware_lpm_u2 When a USB 3.0 lpm-capable device is plugged in to a xHCI host which supports link PM, it will check if U1 and U2 exit latencies have been set in the BOS descriptor; if the check is is passed and the host supports USB3 hardware LPM, USB3 hardware LPM will be - enabled for the device and this file will be created. - The file holds a string value (enable or disable) - indicating whether or not USB3 hardware LPM is - enabled for the device. + enabled for the device and these files will be created. + The files hold a string value (enable or disable) + indicating whether or not USB3 hardware LPM U1 or U2 + is enabled for the device. USB Port Power Control ---------------------- diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index bdeadc112d29..59f998e60030 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3875,17 +3875,30 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, return; } - if (usb_set_lpm_timeout(udev, state, timeout)) + if (usb_set_lpm_timeout(udev, state, timeout)) { /* If we can't set the parent hub U1/U2 timeout, * device-initiated LPM won't be allowed either, so let the xHCI * host know that this link state won't be enabled. */ hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); + } else { + /* Only a configured device will accept the Set Feature + * U1/U2_ENABLE + */ + if (udev->actconfig) + usb_set_device_initiated_lpm(udev, state, true); - /* Only a configured device will accept the Set Feature U1/U2_ENABLE */ - else if (udev->actconfig) - usb_set_device_initiated_lpm(udev, state, true); - + /* As soon as usb_set_lpm_timeout(timeout) returns 0, the + * hub-initiated LPM is enabled. Thus, LPM is enabled no + * matter the result of usb_set_device_initiated_lpm(). + * The only difference is whether device is able to initiate + * LPM. + */ + if (state == USB3_LPM_U1) + udev->usb3_lpm_u1_enabled = 1; + else if (state == USB3_LPM_U2) + udev->usb3_lpm_u2_enabled = 1; + } } /* @@ -3925,6 +3938,18 @@ static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev, dev_warn(&udev->dev, "Could not disable xHCI %s timeout, " "bus schedule bandwidth may be impacted.\n", usb3_lpm_names[state]); + + /* As soon as usb_set_lpm_timeout(0) return 0, hub initiated LPM + * is disabled. Hub will disallows link to enter U1/U2 as well, + * even device is initiating LPM. Hence LPM is disabled if hub LPM + * timeout set to 0, no matter device-initiated LPM is disabled or + * not. + */ + if (state == USB3_LPM_U1) + udev->usb3_lpm_u1_enabled = 0; + else if (state == USB3_LPM_U2) + udev->usb3_lpm_u2_enabled = 0; + return 0; } @@ -3959,8 +3984,6 @@ int usb_disable_lpm(struct usb_device *udev) if (usb_disable_link_state(hcd, udev, USB3_LPM_U2)) goto enable_lpm; - udev->usb3_lpm_enabled = 0; - return 0; enable_lpm: @@ -4018,8 +4041,6 @@ void usb_enable_lpm(struct usb_device *udev) usb_enable_link_state(hcd, udev, USB3_LPM_U1); usb_enable_link_state(hcd, udev, USB3_LPM_U2); - - udev->usb3_lpm_enabled = 1; } EXPORT_SYMBOL_GPL(usb_enable_lpm); diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index d9ec2de6c4cf..65b6e6b84043 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -531,7 +531,7 @@ static ssize_t usb2_lpm_besl_store(struct device *dev, } static DEVICE_ATTR_RW(usb2_lpm_besl); -static ssize_t usb3_hardware_lpm_show(struct device *dev, +static ssize_t usb3_hardware_lpm_u1_show(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_device *udev = to_usb_device(dev); @@ -539,7 +539,7 @@ static ssize_t usb3_hardware_lpm_show(struct device *dev, usb_lock_device(udev); - if (udev->usb3_lpm_enabled) + if (udev->usb3_lpm_u1_enabled) p = "enabled"; else p = "disabled"; @@ -548,7 +548,26 @@ static ssize_t usb3_hardware_lpm_show(struct device *dev, return sprintf(buf, "%s\n", p); } -static DEVICE_ATTR_RO(usb3_hardware_lpm); +static DEVICE_ATTR_RO(usb3_hardware_lpm_u1); + +static ssize_t usb3_hardware_lpm_u2_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + const char *p; + + usb_lock_device(udev); + + if (udev->usb3_lpm_u2_enabled) + p = "enabled"; + else + p = "disabled"; + + usb_unlock_device(udev); + + return sprintf(buf, "%s\n", p); +} +static DEVICE_ATTR_RO(usb3_hardware_lpm_u2); static struct attribute *usb2_hardware_lpm_attr[] = { &dev_attr_usb2_hardware_lpm.attr, @@ -562,7 +581,8 @@ static struct attribute_group usb2_hardware_lpm_attr_group = { }; static struct attribute *usb3_hardware_lpm_attr[] = { - &dev_attr_usb3_hardware_lpm.attr, + &dev_attr_usb3_hardware_lpm_u1.attr, + &dev_attr_usb3_hardware_lpm_u2.attr, NULL, }; static struct attribute_group usb3_hardware_lpm_attr_group = { @@ -592,7 +612,8 @@ static int add_power_attributes(struct device *dev) if (udev->usb2_hw_lpm_capable == 1) rc = sysfs_merge_group(&dev->kobj, &usb2_hardware_lpm_attr_group); - if (udev->lpm_capable == 1) + if (udev->speed == USB_SPEED_SUPER && + udev->lpm_capable == 1) rc = sysfs_merge_group(&dev->kobj, &usb3_hardware_lpm_attr_group); } diff --git a/include/linux/usb.h b/include/linux/usb.h index b9a28074210f..b79925dd2b41 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -511,6 +511,8 @@ struct usb3_lpm_parameters { * @usb2_hw_lpm_enabled: USB2 hardware LPM is enabled * @usb2_hw_lpm_allowed: Userspace allows USB 2.0 LPM to be enabled * @usb3_lpm_enabled: USB3 hardware LPM enabled + * @usb3_lpm_u1_enabled: USB3 hardware U1 LPM enabled + * @usb3_lpm_u2_enabled: USB3 hardware U2 LPM enabled * @string_langid: language ID for strings * @product: iProduct string, if present (static) * @manufacturer: iManufacturer string, if present (static) @@ -584,6 +586,8 @@ struct usb_device { unsigned usb2_hw_lpm_enabled:1; unsigned usb2_hw_lpm_allowed:1; unsigned usb3_lpm_enabled:1; + unsigned usb3_lpm_u1_enabled:1; + unsigned usb3_lpm_u2_enabled:1; int string_langid; /* static strings from the device */ -- cgit v1.2.3 From 513072d90a8dfe4bf83e1f81810de605eb5d7c3b Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Sat, 14 Nov 2015 16:26:33 +0800 Subject: usb: core: lpm: add sysfs node for usb3 lpm permit USB3 LPM is default on in Linux kernel if both xHCI host controller and the USB devices declare to be LPM-capable. Unfortunately, some devices are known to work well with LPM disabled, but to be broken if LPM is enabled, although it declares the LPM capability. Users won't be able to use this kind of devices, until someone puts them in the kernel blacklist and gets the kernel upgraded. This patch adds a sysfs node to permit or forbit USB3 LPM U1 or U2 entry for a port. The settings apply to both before and after device enumeration. Supported values are "0" - neither u1 nor u2 permitted, "u1" - only u1 is permitted, "u2" - only u2 is permitted, "u1_u2" - both u1 and u2 are permitted. With this interface, users can use an LPM-unfriendly USB device on a released Linux kernel. Signed-off-by: Lu Baolu Signed-off-by: Zhuang Jin Can Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/testing/sysfs-bus-usb | 11 ++++ drivers/usb/core/hub.c | 15 +++++- drivers/usb/core/hub.h | 5 +- drivers/usb/core/port.c | 89 ++++++++++++++++++++++++++++++++- 4 files changed, 116 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 136ba17d2da0..0bd731cbb50c 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -189,6 +189,17 @@ Description: The file will read "hotplug", "wired" and "not used" if the information is available, and "unknown" otherwise. +What: /sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit +Date: November 2015 +Contact: Lu Baolu +Description: + Some USB3.0 devices are not friendly to USB3 LPM. usb3_lpm_permit + attribute allows enabling/disabling usb3 lpm of a port. It takes + effect both before and after a usb device is enumerated. Supported + values are "0" if both u1 and u2 are NOT permitted, "u1" if only u1 + is permitted, "u2" if only u2 is permitted, "u1_u2" if both u1 and + u2 are permitted. + What: /sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout Date: May 2013 Contact: Mathias Nyman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 59f998e60030..db7683e2d34c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4020,6 +4020,8 @@ EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm); void usb_enable_lpm(struct usb_device *udev) { struct usb_hcd *hcd; + struct usb_hub *hub; + struct usb_port *port_dev; if (!udev || !udev->parent || udev->speed != USB_SPEED_SUPER || @@ -4039,8 +4041,17 @@ void usb_enable_lpm(struct usb_device *udev) if (udev->lpm_disable_count > 0) return; - usb_enable_link_state(hcd, udev, USB3_LPM_U1); - usb_enable_link_state(hcd, udev, USB3_LPM_U2); + hub = usb_hub_to_struct_hub(udev->parent); + if (!hub) + return; + + port_dev = hub->ports[udev->portnum - 1]; + + if (port_dev->usb3_lpm_u1_permit) + usb_enable_link_state(hcd, udev, USB3_LPM_U1); + + if (port_dev->usb3_lpm_u2_permit) + usb_enable_link_state(hcd, udev, USB3_LPM_U2); } EXPORT_SYMBOL_GPL(usb_enable_lpm); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 688817fb3246..45d070dd1d03 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -92,6 +92,8 @@ struct usb_hub { * @status_lock: synchronize port_event() vs usb_port_{suspend|resume} * @portnum: port index num based one * @is_superspeed cache super-speed status + * @usb3_lpm_u1_permit: whether USB3 U1 LPM is permitted. + * @usb3_lpm_u2_permit: whether USB3 U2 LPM is permitted. */ struct usb_port { struct usb_device *child; @@ -104,6 +106,8 @@ struct usb_port { struct mutex status_lock; u8 portnum; unsigned int is_superspeed:1; + unsigned int usb3_lpm_u1_permit:1; + unsigned int usb3_lpm_u2_permit:1; }; #define to_usb_port(_dev) \ @@ -155,4 +159,3 @@ static inline int hub_port_debounce_be_stable(struct usb_hub *hub, { return hub_port_debounce(hub, port1, false); } - diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 210618319f10..cb18ce0d9177 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -50,6 +50,72 @@ static ssize_t connect_type_show(struct device *dev, } static DEVICE_ATTR_RO(connect_type); +static ssize_t usb3_lpm_permit_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_port *port_dev = to_usb_port(dev); + const char *p; + + if (port_dev->usb3_lpm_u1_permit) { + if (port_dev->usb3_lpm_u2_permit) + p = "u1_u2"; + else + p = "u1"; + } else { + if (port_dev->usb3_lpm_u2_permit) + p = "u2"; + else + p = "0"; + } + + return sprintf(buf, "%s\n", p); +} + +static ssize_t usb3_lpm_permit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *udev = port_dev->child; + struct usb_hcd *hcd; + + if (!strncmp(buf, "u1_u2", 5)) { + port_dev->usb3_lpm_u1_permit = 1; + port_dev->usb3_lpm_u2_permit = 1; + + } else if (!strncmp(buf, "u1", 2)) { + port_dev->usb3_lpm_u1_permit = 1; + port_dev->usb3_lpm_u2_permit = 0; + + } else if (!strncmp(buf, "u2", 2)) { + port_dev->usb3_lpm_u1_permit = 0; + port_dev->usb3_lpm_u2_permit = 1; + + } else if (!strncmp(buf, "0", 1)) { + port_dev->usb3_lpm_u1_permit = 0; + port_dev->usb3_lpm_u2_permit = 0; + } else + return -EINVAL; + + /* If device is connected to the port, disable or enable lpm + * to make new u1 u2 setting take effect immediately. + */ + if (udev) { + hcd = bus_to_hcd(udev->bus); + if (!hcd) + return -EINVAL; + usb_lock_device(udev); + mutex_lock(hcd->bandwidth_mutex); + if (!usb_disable_lpm(udev)) + usb_enable_lpm(udev); + mutex_unlock(hcd->bandwidth_mutex); + usb_unlock_device(udev); + } + + return count; +} +static DEVICE_ATTR_RW(usb3_lpm_permit); + static struct attribute *port_dev_attrs[] = { &dev_attr_connect_type.attr, NULL, @@ -64,6 +130,21 @@ static const struct attribute_group *port_dev_group[] = { NULL, }; +static struct attribute *port_dev_usb3_attrs[] = { + &dev_attr_usb3_lpm_permit.attr, + NULL, +}; + +static struct attribute_group port_dev_usb3_attr_grp = { + .attrs = port_dev_usb3_attrs, +}; + +static const struct attribute_group *port_dev_usb3_group[] = { + &port_dev_attr_grp, + &port_dev_usb3_attr_grp, + NULL, +}; + static void usb_port_device_release(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); @@ -401,6 +482,7 @@ static void find_and_link_peer(struct usb_hub *hub, int port1) int usb_hub_create_port_device(struct usb_hub *hub, int port1) { struct usb_port *port_dev; + struct usb_device *hdev = hub->hdev; int retval; port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL); @@ -417,7 +499,12 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) port_dev->portnum = port1; set_bit(port1, hub->power_bits); port_dev->dev.parent = hub->intfdev; - port_dev->dev.groups = port_dev_group; + if (hub_is_superspeed(hdev)) { + port_dev->usb3_lpm_u1_permit = 1; + port_dev->usb3_lpm_u2_permit = 1; + port_dev->dev.groups = port_dev_usb3_group; + } else + port_dev->dev.groups = port_dev_group; port_dev->dev.type = &usb_port_device_type; port_dev->dev.driver = &usb_port_driver; if (hub_is_superspeed(hub->hdev)) -- cgit v1.2.3 From 930cc0f39b07a830e6939c5634f9a310f306c4b1 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 27 Nov 2015 14:52:52 +0100 Subject: dt-bindings: iio: adc: Update mcp342x binding for the mcp3421 The mcp3421 is the single channel variant of the mcp342x family and can be supported by the mcp342x driver. Signed-off-by: Sascha Hauer Cc: devicetree@vger.kernel.org Acked-by: Rob Herring Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/mcp3422.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt index 333139cc0bfb..dcae4ccfcc52 100644 --- a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt +++ b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt @@ -1,7 +1,8 @@ -* Microchip mcp3422/3/4/6/7/8 chip family (ADC) +* Microchip mcp3421/2/3/4/6/7/8 chip family (ADC) Required properties: - compatible: Should be + "microchip,mcp3421" or "microchip,mcp3422" or "microchip,mcp3423" or "microchip,mcp3424" or -- cgit v1.2.3 From 023e30fb0d3a3b9d6b8dc9e47590aa544d58a22f Mon Sep 17 00:00:00 2001 From: Adriana Reus Date: Tue, 24 Nov 2015 12:59:49 +0200 Subject: Documentation: devicetree: Add property for controlling power saving mode for the us5182 als sensor Add a property to allow changing the default power-saving mode. By default, at read raw the chip will activate and provide one measurent, then it will shut itself down. However, the chip can also work in "continuous" mode which may be more reliable but is also more power consuming. Signed-off-by: Adriana Reus Acked-by: Rob Herring Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/light/us5182d.txt | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/iio/light/us5182d.txt b/Documentation/devicetree/bindings/iio/light/us5182d.txt index 6f0a530144fd..a61979997f37 100644 --- a/Documentation/devicetree/bindings/iio/light/us5182d.txt +++ b/Documentation/devicetree/bindings/iio/light/us5182d.txt @@ -7,13 +7,24 @@ Required properties: Optional properties: - upisemi,glass-coef: glass attenuation factor - compensation factor of resolution 1000 for material transmittance. + - upisemi,dark-ths: array of 8 elements containing 16-bit thresholds (adc counts) corresponding to every scale. + - upisemi,upper-dark-gain: 8-bit dark gain compensation factor(4 int and 4 fractional bits - Q4.4) applied when light > threshold + - upisemi,lower-dark-gain: 8-bit dark gain compensation factor(4 int and 4 fractional bits - Q4.4) applied when light < threshold +- upisemi,continuous: This chip has two power modes: one-shot (chip takes one + measurement and then shuts itself down) and continuous ( + chip takes continuous measurements). The one-shot mode is + more power-friendly but the continuous mode may be more + reliable. If this property is specified the continuous + mode will be used instead of the default one-shot one for + raw reads. + If the optional properties are not specified these factors will default to the values in the below example. The glass-coef defaults to no compensation for the covering material. -- cgit v1.2.3 From 4c3e2a4036054deca4819758f59ff65f27938388 Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Mon, 9 Nov 2015 09:14:02 +0200 Subject: iio: Documentation: Add IIO configfs documentation Signed-off-by: Daniel Baluta Acked-by: Crt Mori Signed-off-by: Jonathan Cameron --- Documentation/ABI/testing/configfs-iio | 21 ++++++++ Documentation/iio/iio_configfs.txt | 93 ++++++++++++++++++++++++++++++++++ 2 files changed, 114 insertions(+) create mode 100644 Documentation/ABI/testing/configfs-iio create mode 100644 Documentation/iio/iio_configfs.txt (limited to 'Documentation') diff --git a/Documentation/ABI/testing/configfs-iio b/Documentation/ABI/testing/configfs-iio new file mode 100644 index 000000000000..2483756fccf5 --- /dev/null +++ b/Documentation/ABI/testing/configfs-iio @@ -0,0 +1,21 @@ +What: /config/iio +Date: October 2015 +KernelVersion: 4.4 +Contact: linux-iio@vger.kernel.org +Description: + This represents Industrial IO configuration entry point + directory. It contains sub-groups corresponding to IIO + objects. + +What: /config/iio/triggers +Date: October 2015 +KernelVersion: 4.4 +Description: + Industrial IO software triggers directory. + +What: /config/iio/triggers/hrtimers +Date: October 2015 +KernelVersion: 4.4 +Description: + High resolution timers directory. Creating a directory here + will result in creating a hrtimer trigger in the IIO subsystem. diff --git a/Documentation/iio/iio_configfs.txt b/Documentation/iio/iio_configfs.txt new file mode 100644 index 000000000000..f0add35cd52e --- /dev/null +++ b/Documentation/iio/iio_configfs.txt @@ -0,0 +1,93 @@ +Industrial IIO configfs support + +1. Overview + +Configfs is a filesystem-based manager of kernel objects. IIO uses some +objects that could be easily configured using configfs (e.g.: devices, +triggers). + +See Documentation/filesystems/configfs/configfs.txt for more information +about how configfs works. + +2. Usage + +In order to use configfs support in IIO we need to select it at compile +time via CONFIG_IIO_CONFIGFS config option. + +Then, mount the configfs filesystem (usually under /config directory): + +$ mkdir /config +$ mount -t configfs none /config + +At this point, all default IIO groups will be created and can be accessed +under /config/iio. Next chapters will describe available IIO configuration +objects. + +3. Software triggers + +One of the IIO default configfs groups is the "triggers" group. It is +automagically accessible when the configfs is mounted and can be found +under /config/iio/triggers. + +IIO software triggers implementation offers support for creating multiple +trigger types. A new trigger type is usually implemented as a separate +kernel module following the interface in include/linux/iio/sw_trigger.h: + +/* + * drivers/iio/trigger/iio-trig-sample.c + * sample kernel module implementing a new trigger type + */ +#include + + +static struct iio_sw_trigger *iio_trig_sample_probe(const char *name) +{ + /* + * This allocates and registers an IIO trigger plus other + * trigger type specific initialization. + */ +} + +static int iio_trig_hrtimer_remove(struct iio_sw_trigger *swt) +{ + /* + * This undoes the actions in iio_trig_sample_probe + */ +} + +static const struct iio_sw_trigger_ops iio_trig_sample_ops = { + .probe = iio_trig_sample_probe, + .remove = iio_trig_sample_remove, +}; + +static struct iio_sw_trigger_type iio_trig_sample = { + .name = "trig-sample", + .owner = THIS_MODULE, + .ops = &iio_trig_sample_ops, +}; + +module_iio_sw_trigger_driver(iio_trig_sample); + +Each trigger type has its own directory under /config/iio/triggers. Loading +iio-trig-sample module will create 'trig-sample' trigger type directory +/config/iio/triggers/trig-sample. + +We support the following interrupt sources (trigger types): + * hrtimer, uses high resolution timers as interrupt source + +3.1 Hrtimer triggers creation and destruction + +Loading iio-trig-hrtimer module will register hrtimer trigger types allowing +users to create hrtimer triggers under /config/iio/triggers/hrtimer. + +e.g: + +$ mkdir /config/triggers/hrtimer/instance1 +$ rmdir /config/triggers/hrtimer/instance1 + +Each trigger can have one or more attributes specific to the trigger type. + +3.2 "hrtimer" trigger types attributes + +"hrtimer" trigger type doesn't have any configurable attribute from /config dir. +It does introduce the sampling_frequency attribute to trigger directory. -- cgit v1.2.3 From cc018e3612e4a8244790521e88f9b1b7eb60dab0 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 3 Dec 2015 10:53:50 +0100 Subject: i2c: at91: add support for the HOLD field The hold field allows to configure the data hold time which can be set with the help of the generic binding 'i2c-sda-hold-time-ns'. This feature has been introduced with SAMA5D4 SoC family. Signed-off-by: Ludovic Desroches Acked-by: Nicolas Ferre Acked-by: Rob Herring Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c-at91.txt | 5 +- drivers/i2c/busses/i2c-at91.c | 53 ++++++++++++++++++++-- 2 files changed, 54 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index 6e81dc153f3b..ef973a0343c7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -3,7 +3,7 @@ I2C for Atmel platforms Required properties : - compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c", "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c", - "atmel,at91sam9x5-i2c" or "atmel,sama5d2-i2c" + "atmel,at91sam9x5-i2c", "atmel,sama5d4-i2c" or "atmel,sama5d2-i2c" - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. @@ -17,6 +17,8 @@ Optional properties: - dma-names: should contain "tx" and "rx". - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO capable I2C controllers. +- i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c" + and "atmel,sama5d2-i2c". - Child nodes conforming to i2c bus binding Examples : @@ -52,6 +54,7 @@ i2c0: i2c@f8034600 { #size-cells = <0>; clocks = <&flx0>; atmel,fifo-size = <16>; + i2c-sda-hold-time-ns = <336>; wm8731: wm8731@1a { compatible = "wm8731"; diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 10835d1f559b..921d32bfcda8 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -64,6 +64,8 @@ #define AT91_TWI_IADR 0x000c /* Internal Address Register */ #define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */ +#define AT91_TWI_CWGR_HOLD_MAX 0x1f +#define AT91_TWI_CWGR_HOLD(x) (((x) & AT91_TWI_CWGR_HOLD_MAX) << 24) #define AT91_TWI_SR 0x0020 /* Status Register */ #define AT91_TWI_TXCOMP BIT(0) /* Transmission Complete */ @@ -110,6 +112,7 @@ struct at91_twi_pdata { unsigned clk_offset; bool has_unre_flag; bool has_alt_cmd; + bool has_hold_field; struct at_dma_slave dma_slave; }; @@ -187,10 +190,11 @@ static void at91_init_twi_bus(struct at91_twi_dev *dev) */ static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk) { - int ckdiv, cdiv, div; + int ckdiv, cdiv, div, hold = 0; struct at91_twi_pdata *pdata = dev->pdata; int offset = pdata->clk_offset; int max_ckdiv = pdata->clk_max_div; + u32 twd_hold_time_ns = 0; div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk), 2 * twi_clk) - offset); @@ -204,8 +208,33 @@ static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk) cdiv = 255; } - dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv; - dev_dbg(dev->dev, "cdiv %d ckdiv %d\n", cdiv, ckdiv); + if (pdata->has_hold_field) { + of_property_read_u32(dev->dev->of_node, "i2c-sda-hold-time-ns", + &twd_hold_time_ns); + + /* + * hold time = HOLD + 3 x T_peripheral_clock + * Use clk rate in kHz to prevent overflows when computing + * hold. + */ + hold = DIV_ROUND_UP(twd_hold_time_ns + * (clk_get_rate(dev->clk) / 1000), 1000000); + hold -= 3; + if (hold < 0) + hold = 0; + if (hold > AT91_TWI_CWGR_HOLD_MAX) { + dev_warn(dev->dev, + "HOLD field set to its maximum value (%d instead of %d)\n", + AT91_TWI_CWGR_HOLD_MAX, hold); + hold = AT91_TWI_CWGR_HOLD_MAX; + } + } + + dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv + | AT91_TWI_CWGR_HOLD(hold); + + dev_dbg(dev->dev, "cdiv %d ckdiv %d hold %d (%d ns)\n", + cdiv, ckdiv, hold, twd_hold_time_ns); } static void at91_twi_dma_cleanup(struct at91_twi_dev *dev) @@ -797,6 +826,7 @@ static struct at91_twi_pdata at91rm9200_config = { .clk_offset = 3, .has_unre_flag = true, .has_alt_cmd = false, + .has_hold_field = false, }; static struct at91_twi_pdata at91sam9261_config = { @@ -804,6 +834,7 @@ static struct at91_twi_pdata at91sam9261_config = { .clk_offset = 4, .has_unre_flag = false, .has_alt_cmd = false, + .has_hold_field = false, }; static struct at91_twi_pdata at91sam9260_config = { @@ -811,6 +842,7 @@ static struct at91_twi_pdata at91sam9260_config = { .clk_offset = 4, .has_unre_flag = false, .has_alt_cmd = false, + .has_hold_field = false, }; static struct at91_twi_pdata at91sam9g20_config = { @@ -818,6 +850,7 @@ static struct at91_twi_pdata at91sam9g20_config = { .clk_offset = 4, .has_unre_flag = false, .has_alt_cmd = false, + .has_hold_field = false, }; static struct at91_twi_pdata at91sam9g10_config = { @@ -825,6 +858,7 @@ static struct at91_twi_pdata at91sam9g10_config = { .clk_offset = 4, .has_unre_flag = false, .has_alt_cmd = false, + .has_hold_field = false, }; static const struct platform_device_id at91_twi_devtypes[] = { @@ -854,6 +888,15 @@ static struct at91_twi_pdata at91sam9x5_config = { .clk_offset = 4, .has_unre_flag = false, .has_alt_cmd = false, + .has_hold_field = false, +}; + +static struct at91_twi_pdata sama5d4_config = { + .clk_max_div = 7, + .clk_offset = 4, + .has_unre_flag = false, + .has_alt_cmd = false, + .has_hold_field = true, }; static struct at91_twi_pdata sama5d2_config = { @@ -861,6 +904,7 @@ static struct at91_twi_pdata sama5d2_config = { .clk_offset = 4, .has_unre_flag = true, .has_alt_cmd = true, + .has_hold_field = true, }; static const struct of_device_id atmel_twi_dt_ids[] = { @@ -882,6 +926,9 @@ static const struct of_device_id atmel_twi_dt_ids[] = { }, { .compatible = "atmel,at91sam9x5-i2c", .data = &at91sam9x5_config, + }, { + .compatible = "atmel,sama5d4-i2c", + .data = &sama5d4_config, }, { .compatible = "atmel,sama5d2-i2c", .data = &sama5d2_config, -- cgit v1.2.3 From 444f9e99a840c4050c0530cfef81801a21a59f4c Mon Sep 17 00:00:00 2001 From: Chris J Arges Date: Tue, 1 Dec 2015 20:40:56 -0600 Subject: livepatch: function,sympos scheme in livepatch sysfs directory The following directory structure will allow for cases when the same function name exists in a single object. /sys/kernel/livepatch/// The sympos number corresponds to the nth occurrence of the symbol name in kallsyms for the patched object. An example of patching multiple symbols can be found here: https://github.com/dynup/kpatch/issues/493 Signed-off-by: Chris J Arges Reviewed-by: Petr Mladek Acked-by: Josh Poimboeuf Signed-off-by: Jiri Kosina --- Documentation/ABI/testing/sysfs-kernel-livepatch | 6 +++++- kernel/livepatch/core.c | 10 ++++++++-- 2 files changed, 13 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-kernel-livepatch b/Documentation/ABI/testing/sysfs-kernel-livepatch index 5bf42a840b22..da87f43aec58 100644 --- a/Documentation/ABI/testing/sysfs-kernel-livepatch +++ b/Documentation/ABI/testing/sysfs-kernel-livepatch @@ -33,7 +33,7 @@ Description: The object directory contains subdirectories for each function that is patched within the object. -What: /sys/kernel/livepatch/// +What: /sys/kernel/livepatch/// Date: Nov 2014 KernelVersion: 3.19.0 Contact: live-patching@vger.kernel.org @@ -41,4 +41,8 @@ Description: The function directory contains attributes regarding the properties and state of the patched function. + The directory name contains the patched function name and a + sympos number corresponding to the nth occurrence of the symbol + name in kallsyms for the patched object. + There are currently no such attributes. diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c index e842534d3493..94893e844e44 100644 --- a/kernel/livepatch/core.c +++ b/kernel/livepatch/core.c @@ -535,7 +535,7 @@ EXPORT_SYMBOL_GPL(klp_enable_patch); * /sys/kernel/livepatch/ * /sys/kernel/livepatch//enabled * /sys/kernel/livepatch// - * /sys/kernel/livepatch/// + * /sys/kernel/livepatch/// */ static ssize_t enabled_store(struct kobject *kobj, struct kobj_attribute *attr, @@ -680,8 +680,14 @@ static int klp_init_func(struct klp_object *obj, struct klp_func *func) INIT_LIST_HEAD(&func->stack_node); func->state = KLP_DISABLED; + /* The format for the sysfs directory is where sympos + * is the nth occurrence of this symbol in kallsyms for the patched + * object. If the user selects 0 for old_sympos, then 1 will be used + * since a unique symbol will be the first occurrence. + */ return kobject_init_and_add(&func->kobj, &klp_ktype_func, - &obj->kobj, "%s", func->old_name); + &obj->kobj, "%s,%lu", func->old_name, + func->old_sympos ? func->old_sympos : 1); } /* parts of the initialization that is done only when the object is loaded */ -- cgit v1.2.3 From 9a65a6d3cbeeb4429b3bdff6404fca0b98fb8222 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Tue, 3 Nov 2015 15:08:33 +0000 Subject: mfd: arizona: Update DT bindings to add CS47L24 and WM1831 This updates the Arizona MFD device tree bindings to add the Cirrus Logic CS47L24 and WM1831 codecs. Note that unlike all the other codecs the DCVDD-supply and MICVDD-supply are mandatory. Signed-off-by: Richard Fitzgerald Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/arizona.txt | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 2c5d0387fe98..2b6ccdb32bd9 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -1,4 +1,4 @@ -Wolfson Arizona class audio SoCs +Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs These devices are audio SoCs with extensive digital capabilites and a range of analogue I/O. @@ -6,12 +6,14 @@ of analogue I/O. Required properties: - compatible : One of the following chip-specific strings: + "cirrus,cs47l24" "wlf,wm5102" "wlf,wm5110" "wlf,wm8280" "wlf,wm8997" "wlf,wm8998" "wlf,wm1814" + "wlf,wm1831" - reg : I2C slave address when connected using I2C, chip select number when using SPI. @@ -41,6 +43,10 @@ Required properties: - SPKVDD-supply : Speaker driver power supply (wm8997) + - DCVDD-supply : Main power supply (cs47l24, wm1831) + + - MICVDD-supply : Microphone power supply (cs47l24, wm1831) + Optional properties: - wlf,reset : GPIO specifier for the GPIO controlling /RESET @@ -69,6 +75,7 @@ Optional properties: - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt + (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814) Also see child specific device properties: Regulator - ../regulator/arizona-regulator.txt -- cgit v1.2.3 From 40d581489adbb44a2d1005867d7a7695d61110e6 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 3 Dec 2015 15:03:32 +0100 Subject: Documentation: nousb is a module parameter The documentation wrongly implied that it is a core parameter. That is not true. If usbcore is compiled as a module, a module parameter needs a prefix. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e6b6e056cc11..fd333fbfd2ab 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2575,8 +2575,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. notsc [BUGS=X86-32] Disable Time Stamp Counter - nousb [USB] Disable the USB subsystem - nowatchdog [KNL] Disable both lockup detectors, i.e. soft-lockup and NMI watchdog (hard-lockup). @@ -3898,6 +3896,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. USB_REQ_GET_DESCRIPTOR request in milliseconds (default 5000 = 5.0 seconds). + usbcore.nousb [USB] Disable the USB subsystem + usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. -- cgit v1.2.3 From 4bb9998d388b48dc0a4128bd1f4d85f09ec3b705 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Mon, 16 Nov 2015 20:46:28 +0900 Subject: Doc: f2fs: Fix typos in Documentation/filesystems/f2fs.txt This patch fix some typos in Documentation/filesystems/f2fs.txt Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Signed-off-by: Jaegeuk Kim --- Documentation/filesystems/f2fs.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index b102b436563e..ad10494aa224 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -102,7 +102,7 @@ background_gc=%s Turn on/off cleaning operations, namely garbage collection, triggered in background when I/O subsystem is idle. If background_gc=on, it will turn on the garbage collection and if background_gc=off, garbage collection - will be truned off. If background_gc=sync, it will turn + will be turned off. If background_gc=sync, it will turn on synchronous garbage collection running in background. Default value for this option is on. So garbage collection is on by default. @@ -145,7 +145,7 @@ extent_cache Enable an extent cache based on rb-tree, it can cache as many as extent which map between contiguous logical address and physical address per inode, resulting in increasing the cache hit ratio. Set by default. -noextent_cache Diable an extent cache based on rb-tree explicitly, see +noextent_cache Disable an extent cache based on rb-tree explicitly, see the above extent_cache mount option. noinline_data Disable the inline data feature, inline data feature is enabled by default. @@ -192,7 +192,7 @@ Files in /sys/fs/f2fs/ policy for garbage collection. Setting gc_idle = 0 (default) will disable this option. Setting gc_idle = 1 will select the Cost Benefit approach - & setting gc_idle = 2 will select the greedy aproach. + & setting gc_idle = 2 will select the greedy approach. reclaim_segments This parameter controls the number of prefree segments to be reclaimed. If the number of prefree @@ -298,7 +298,7 @@ The dump.f2fs shows the information of specific inode and dumps SSA and SIT to file. Each file is dump_ssa and dump_sit. The dump.f2fs is used to debug on-disk data structures of the f2fs filesystem. -It shows on-disk inode information reconized by a given inode number, and is +It shows on-disk inode information recognized by a given inode number, and is able to dump all the SSA and SIT entries into predefined files, ./dump_ssa and ./dump_sit respectively. -- cgit v1.2.3 From bcf5b3deb0d269a3a28ecf4c73e1c89121ba61d4 Mon Sep 17 00:00:00 2001 From: Sander Vermin Date: Tue, 1 Dec 2015 13:25:05 -0800 Subject: Input: pixcir_i2c - add support for wake and enable gpios On some devices the wake and enable pins of the pixcir touchscreen controller are connected to gpios and these must be controlled by the driver for the device to operate properly. Signed-off-by: Sander Vermin Signed-off-by: Hans de Goede Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/pixcir_i2c_ts.txt | 4 ++- drivers/input/touchscreen/pixcir_i2c_ts.c | 41 ++++++++++++++++++++++ 2 files changed, 44 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt index 8eb240a287c8..697a3e7831e7 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt @@ -9,7 +9,9 @@ Required properties: - touchscreen-size-y: vertical resolution of touchscreen (in pixels) Optional properties: -- reset-gpio: GPIO connected to the RESET line of the chip +- reset-gpios: GPIO connected to the RESET line of the chip +- enable-gpios: GPIO connected to the ENABLE line of the chip +- wake-gpios: GPIO connected to the WAKE line of the chip Example: diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index 4b961ad9f0b5..09523a3d3f23 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -38,6 +38,8 @@ struct pixcir_i2c_ts_data { struct input_dev *input; struct gpio_desc *gpio_attb; struct gpio_desc *gpio_reset; + struct gpio_desc *gpio_enable; + struct gpio_desc *gpio_wake; const struct pixcir_i2c_chip_data *chip; int max_fingers; /* Max fingers supported in this instance */ bool running; @@ -208,6 +210,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts, struct device *dev = &ts->client->dev; int ret; + if (mode == PIXCIR_POWER_ACTIVE || mode == PIXCIR_POWER_IDLE) { + if (ts->gpio_wake) + gpiod_set_value_cansleep(ts->gpio_wake, 1); + } + ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE); if (ret < 0) { dev_err(dev, "%s: can't read reg 0x%x : %d\n", @@ -228,6 +235,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts, return ret; } + if (mode == PIXCIR_POWER_HALT) { + if (ts->gpio_wake) + gpiod_set_value_cansleep(ts->gpio_wake, 0); + } + return 0; } @@ -302,6 +314,11 @@ static int pixcir_start(struct pixcir_i2c_ts_data *ts) struct device *dev = &ts->client->dev; int error; + if (ts->gpio_enable) { + gpiod_set_value_cansleep(ts->gpio_enable, 1); + msleep(100); + } + /* LEVEL_TOUCH interrupt with active low polarity */ error = pixcir_set_int_mode(ts, PIXCIR_INT_LEVEL_TOUCH, 0); if (error) { @@ -343,6 +360,9 @@ static int pixcir_stop(struct pixcir_i2c_ts_data *ts) /* Wait till running ISR is complete */ synchronize_irq(ts->client->irq); + if (ts->gpio_enable) + gpiod_set_value_cansleep(ts->gpio_enable, 0); + return 0; } @@ -534,6 +554,27 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, return error; } + tsdata->gpio_wake = devm_gpiod_get_optional(dev, "wake", + GPIOD_OUT_HIGH); + if (IS_ERR(tsdata->gpio_wake)) { + error = PTR_ERR(tsdata->gpio_wake); + if (error != -EPROBE_DEFER) + dev_err(dev, "Failed to get wake gpio: %d\n", error); + return error; + } + + tsdata->gpio_enable = devm_gpiod_get_optional(dev, "enable", + GPIOD_OUT_HIGH); + if (IS_ERR(tsdata->gpio_enable)) { + error = PTR_ERR(tsdata->gpio_enable); + if (error != -EPROBE_DEFER) + dev_err(dev, "Failed to get enable gpio: %d\n", error); + return error; + } + + if (tsdata->gpio_enable) + msleep(100); + error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, client->name, tsdata); -- cgit v1.2.3 From d83e2a4ea2296620e8f6cb724e60190826c43a3f Mon Sep 17 00:00:00 2001 From: Chris Dunlop Date: Fri, 18 Sep 2015 16:10:55 +1000 Subject: Documentation: fix sysfs-ptp s/avaiable/available/g This fixup is already in scripts/spelling.txt. The fix in Documentation/ABI/testing/sysfs-ptp affects documentation of a /sys entry: the /sys entry itself is correct. Signed-off-by: Chris Dunlop Signed-off-by: Jiri Kosina --- Documentation/ABI/testing/sysfs-ptp | 2 +- Documentation/sysctl/vm.txt | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-ptp b/Documentation/ABI/testing/sysfs-ptp index 44806a678f12..a17f817a9309 100644 --- a/Documentation/ABI/testing/sysfs-ptp +++ b/Documentation/ABI/testing/sysfs-ptp @@ -74,7 +74,7 @@ Description: assignment may be changed by two writing numbers into the file. -What: /sys/class/ptp/ptpN/pps_avaiable +What: /sys/class/ptp/ptpN/pps_available Date: September 2010 Contact: Richard Cochran Description: diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index a4482fceacec..8e4025e6b44f 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -135,7 +135,7 @@ Contains, as a percentage of total available memory that contains free pages and reclaimable pages, the number of pages at which the background kernel flusher threads will start writing out dirty data. -The total avaiable memory is not equal to total system memory. +The total available memory is not equal to total system memory. ============================================================== @@ -170,7 +170,7 @@ Contains, as a percentage of total available memory that contains free pages and reclaimable pages, the number of pages at which a process which is generating disk writes will itself start writing out dirty data. -The total avaiable memory is not equal to total system memory. +The total available memory is not equal to total system memory. ============================================================== -- cgit v1.2.3 From 14d74598bcfaa93ed3dd429060eca2f5a2295713 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Tue, 3 Nov 2015 12:42:49 +0100 Subject: cpufreq: ARM big LITTLE: correct dead link in documentation commit 3566c5b277a4 ("PM / OPP: Create a directory for opp bindings") renamed the file: Documentation/devicetree/bindings/power/opp.txt to Documentation/devicetree/bindings/opp/opp.txt leaving a dead link in cpufreq/arm_big_little_dt.txt. The link points now to the good file. Signed-off-by: Richard Genoud Signed-off-by: Jiri Kosina --- Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt index 0715695e94a9..2aa06ac0fac5 100644 --- a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt +++ b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt @@ -12,7 +12,7 @@ must be present contiguously. Generic DT driver will check only node 'x' for cpu:x. Required properties: -- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt +- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt for details Optional properties: -- cgit v1.2.3 From 925f709fb381e21b08445f5da0797e198aac1460 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Tue, 3 Nov 2015 13:09:23 +0100 Subject: cpufreq-dt: correct dead link in documentation commit 3566c5b277a4 ("PM / OPP: Create a directory for opp bindings") renamed the file: Documentation/devicetree/bindings/power/opp.txt to Documentation/devicetree/bindings/opp/opp.txt leaving a dead link in cpufreq/arm_big_little_dt.txt. The link points now to the good file. Signed-off-by: Richard Genoud Signed-off-by: Jiri Kosina --- Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt index e41c98ffbccb..dd3929e85dec 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt @@ -11,7 +11,7 @@ Required properties: - None Optional properties: -- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for +- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt for details. OPPs *must* be supplied either via DT, i.e. this property, or populated at runtime. - clock-latency: Specify the possible maximum transition latency for clock, -- cgit v1.2.3 From c90456e36d9c89de0b6e9c8f21003208e0ad7f13 Mon Sep 17 00:00:00 2001 From: James Ban Date: Tue, 8 Dec 2015 10:57:29 +0900 Subject: regulator: pv88090: new regulator driver This is the driver for the Powerventure PV88090 BUCKs and LDOs regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/pv88090.txt | 65 +++ drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/pv88090-regulator.c | 458 +++++++++++++++++++++ drivers/regulator/pv88090-regulator.h | 98 +++++ 5 files changed, 630 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/pv88090.txt create mode 100644 drivers/regulator/pv88090-regulator.c create mode 100644 drivers/regulator/pv88090-regulator.h (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/pv88090.txt b/Documentation/devicetree/bindings/regulator/pv88090.txt new file mode 100644 index 000000000000..e52b2a95cdde --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pv88090.txt @@ -0,0 +1,65 @@ +* Powerventure Semiconductor PV88090 Voltage Regulator + +Required properties: +- compatible: "pvs,pv88090". +- reg: I2C slave address, usually 0x48. +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCK1, BUCK2, BUCK3, LDO1, and LDO2. + +Optional properties: +- Any optional property defined in regulator.txt + +Example + + pmic: pv88090@48 { + compatible = "pvs,pv88090"; + reg = <0x48>; + interrupt-parent = <&gpio>; + interrupts = <24 24>; + + regulators { + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = < 220000>; + regulator-max-microamp = <7040000>; + regulator-boot-on; + }; + + BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + }; + + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <4350000>; + regulator-boot-on; + }; + + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = < 650000>; + regulator-max-microvolt = <2225000>; + regulator-boot-on; + }; + }; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index c61f72ff1dfd..5433c448aff2 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -512,6 +512,14 @@ config REGULATOR_PV88060 Say y here to support the voltage regulators and convertors PV88060 +config REGULATOR_PV88090 + tristate "Powerventure Semiconductor PV88090 regulator" + depends on I2C + select REGMAP_I2C + help + Say y here to support the voltage regulators and convertors + on PV88090 + config REGULATOR_PWM tristate "PWM voltage regulator" depends on PWM diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index b11c8a4f873a..29cda9d53787 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -67,6 +67,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o +obj-$(CONFIG_REGULATOR_PV88090) += pv88090-regulator.o obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o diff --git a/drivers/regulator/pv88090-regulator.c b/drivers/regulator/pv88090-regulator.c new file mode 100644 index 000000000000..3ec5f2bdfc51 --- /dev/null +++ b/drivers/regulator/pv88090-regulator.c @@ -0,0 +1,458 @@ +/* + * pv88090-regulator.c - Regulator device driver for PV88090 + * Copyright (C) 2015 Powerventure Semiconductor Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "pv88090-regulator.h" + +#define PV88090_MAX_REGULATORS 5 + +/* PV88090 REGULATOR IDs */ +enum { + /* BUCKs */ + PV88090_ID_BUCK1, + PV88090_ID_BUCK2, + PV88090_ID_BUCK3, + + /* LDOs */ + PV88090_ID_LDO1, + PV88090_ID_LDO2, +}; + +struct pv88090_regulator { + struct regulator_desc desc; + /* Current limiting */ + unsigned n_current_limits; + const int *current_limits; + unsigned int limit_mask; + unsigned int conf; + unsigned int conf2; +}; + +struct pv88090 { + struct device *dev; + struct regmap *regmap; + struct regulator_dev *rdev[PV88090_MAX_REGULATORS]; +}; + +struct pv88090_buck_voltage { + int min_uV; + int max_uV; + int uV_step; +}; + +static const struct regmap_config pv88090_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +/* Current limits array (in uA) for BUCK1, BUCK2, BUCK3. + * Entry indexes corresponds to register values. + */ + +static const int pv88090_buck1_limits[] = { + 220000, 440000, 660000, 880000, 1100000, 1320000, 1540000, 1760000, + 1980000, 2200000, 2420000, 2640000, 2860000, 3080000, 3300000, 3520000, + 3740000, 3960000, 4180000, 4400000, 4620000, 4840000, 5060000, 5280000, + 5500000, 5720000, 5940000, 6160000, 6380000, 6600000, 6820000, 7040000 +}; + +static const int pv88090_buck23_limits[] = { + 1496000, 2393000, 3291000, 4189000 +}; + +static const struct pv88090_buck_voltage pv88090_buck_vol[3] = { + { + .min_uV = 600000, + .max_uV = 1393750, + .uV_step = 6250, + }, + + { + .min_uV = 1400000, + .max_uV = 2193750, + .uV_step = 6250, + }, + { + .min_uV = 1250000, + .max_uV = 2837500, + .uV_step = 12500, + }, +}; + +static unsigned int pv88090_buck_get_mode(struct regulator_dev *rdev) +{ + struct pv88090_regulator *info = rdev_get_drvdata(rdev); + unsigned int data; + int ret, mode = 0; + + ret = regmap_read(rdev->regmap, info->conf, &data); + if (ret < 0) + return ret; + + switch (data & PV88090_BUCK1_MODE_MASK) { + case PV88090_BUCK_MODE_SYNC: + mode = REGULATOR_MODE_FAST; + break; + case PV88090_BUCK_MODE_AUTO: + mode = REGULATOR_MODE_NORMAL; + break; + case PV88090_BUCK_MODE_SLEEP: + mode = REGULATOR_MODE_STANDBY; + break; + } + + return mode; +} + +static int pv88090_buck_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct pv88090_regulator *info = rdev_get_drvdata(rdev); + int val = 0; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = PV88090_BUCK_MODE_SYNC; + break; + case REGULATOR_MODE_NORMAL: + val = PV88090_BUCK_MODE_AUTO; + break; + case REGULATOR_MODE_STANDBY: + val = PV88090_BUCK_MODE_SLEEP; + break; + default: + return -EINVAL; + } + + return regmap_update_bits(rdev->regmap, info->conf, + PV88090_BUCK1_MODE_MASK, val); +} + +static int pv88090_set_current_limit(struct regulator_dev *rdev, int min, + int max) +{ + struct pv88090_regulator *info = rdev_get_drvdata(rdev); + int i; + + /* search for closest to maximum */ + for (i = info->n_current_limits; i >= 0; i--) { + if (min <= info->current_limits[i] + && max >= info->current_limits[i]) { + return regmap_update_bits(rdev->regmap, + info->conf, + info->limit_mask, + i << PV88090_BUCK1_ILIM_SHIFT); + } + } + + return -EINVAL; +} + +static int pv88090_get_current_limit(struct regulator_dev *rdev) +{ + struct pv88090_regulator *info = rdev_get_drvdata(rdev); + unsigned int data; + int ret; + + ret = regmap_read(rdev->regmap, info->conf, &data); + if (ret < 0) + return ret; + + data = (data & info->limit_mask) >> PV88090_BUCK1_ILIM_SHIFT; + return info->current_limits[data]; +} + +static struct regulator_ops pv88090_buck_ops = { + .get_mode = pv88090_buck_get_mode, + .set_mode = pv88090_buck_set_mode, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_current_limit = pv88090_set_current_limit, + .get_current_limit = pv88090_get_current_limit, +}; + +static struct regulator_ops pv88090_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, +}; + +#define PV88090_BUCK(chip, regl_name, min, step, max, limits_array) \ +{\ + .desc = {\ + .id = chip##_ID_##regl_name,\ + .name = __stringify(chip##_##regl_name),\ + .of_match = of_match_ptr(#regl_name),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .ops = &pv88090_buck_ops,\ + .min_uV = min, \ + .uV_step = step, \ + .n_voltages = ((max) - (min))/(step) + 1, \ + .enable_reg = PV88090_REG_##regl_name##_CONF0, \ + .enable_mask = PV88090_##regl_name##_EN, \ + .vsel_reg = PV88090_REG_##regl_name##_CONF0, \ + .vsel_mask = PV88090_V##regl_name##_MASK, \ + },\ + .current_limits = limits_array, \ + .n_current_limits = ARRAY_SIZE(limits_array), \ + .limit_mask = PV88090_##regl_name##_ILIM_MASK, \ + .conf = PV88090_REG_##regl_name##_CONF1, \ + .conf2 = PV88090_REG_##regl_name##_CONF2, \ +} + +#define PV88090_LDO(chip, regl_name, min, step, max) \ +{\ + .desc = {\ + .id = chip##_ID_##regl_name,\ + .name = __stringify(chip##_##regl_name),\ + .of_match = of_match_ptr(#regl_name),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .ops = &pv88090_ldo_ops,\ + .min_uV = min, \ + .uV_step = step, \ + .n_voltages = ((max) - (min))/(step) + 1, \ + .enable_reg = PV88090_REG_##regl_name##_CONT, \ + .enable_mask = PV88090_##regl_name##_EN, \ + .vsel_reg = PV88090_REG_##regl_name##_CONT, \ + .vsel_mask = PV88090_V##regl_name##_MASK, \ + },\ +} + +static struct pv88090_regulator pv88090_regulator_info[] = { + PV88090_BUCK(PV88090, BUCK1, 600000, 6250, 1393750, + pv88090_buck1_limits), + PV88090_BUCK(PV88090, BUCK2, 600000, 6250, 1393750, + pv88090_buck23_limits), + PV88090_BUCK(PV88090, BUCK3, 600000, 6250, 1393750, + pv88090_buck23_limits), + PV88090_LDO(PV88090, LDO1, 1200000, 50000, 4350000), + PV88090_LDO(PV88090, LDO2, 650000, 25000, 2225000), +}; + +static irqreturn_t pv88090_irq_handler(int irq, void *data) +{ + struct pv88090 *chip = data; + int i, reg_val, err, ret = IRQ_NONE; + + err = regmap_read(chip->regmap, PV88090_REG_EVENT_A, ®_val); + if (err < 0) + goto error_i2c; + + if (reg_val & PV88090_E_VDD_FLT) { + for (i = 0; i < PV88090_MAX_REGULATORS; i++) { + if (chip->rdev[i] != NULL) { + regulator_notifier_call_chain(chip->rdev[i], + REGULATOR_EVENT_UNDER_VOLTAGE, + NULL); + } + } + + err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A, + PV88090_E_VDD_FLT, PV88090_E_VDD_FLT); + if (err < 0) + goto error_i2c; + + ret = IRQ_HANDLED; + } + + if (reg_val & PV88090_E_OVER_TEMP) { + for (i = 0; i < PV88090_MAX_REGULATORS; i++) { + if (chip->rdev[i] != NULL) { + regulator_notifier_call_chain(chip->rdev[i], + REGULATOR_EVENT_OVER_TEMP, + NULL); + } + } + + err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A, + PV88090_E_OVER_TEMP, PV88090_E_OVER_TEMP); + if (err < 0) + goto error_i2c; + + ret = IRQ_HANDLED; + } + + return ret; + +error_i2c: + dev_err(chip->dev, "I2C error : %d\n", err); + return IRQ_NONE; +} + +/* + * I2C driver interface functions + */ +static int pv88090_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev); + struct pv88090 *chip; + struct regulator_config config = { }; + int error, i, ret = 0; + unsigned int conf2, range, index; + + chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88090), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->dev = &i2c->dev; + chip->regmap = devm_regmap_init_i2c(i2c, &pv88090_regmap_config); + if (IS_ERR(chip->regmap)) { + error = PTR_ERR(chip->regmap); + dev_err(chip->dev, "Failed to allocate register map: %d\n", + error); + return error; + } + + i2c_set_clientdata(i2c, chip); + + if (i2c->irq != 0) { + ret = regmap_write(chip->regmap, PV88090_REG_MASK_A, 0xFF); + if (ret < 0) { + dev_err(chip->dev, + "Failed to mask A reg: %d\n", ret); + return ret; + } + + ret = regmap_write(chip->regmap, PV88090_REG_MASK_B, 0xFF); + if (ret < 0) { + dev_err(chip->dev, + "Failed to mask B reg: %d\n", ret); + return ret; + } + + ret = request_threaded_irq(i2c->irq, NULL, + pv88090_irq_handler, + IRQF_TRIGGER_LOW|IRQF_ONESHOT, + "pv88090", chip); + if (ret != 0) { + dev_err(chip->dev, "Failed to request IRQ: %d\n", + i2c->irq); + return ret; + } + + ret = regmap_update_bits(chip->regmap, PV88090_REG_MASK_A, + PV88090_M_VDD_FLT | PV88090_M_OVER_TEMP, 0); + if (ret < 0) { + dev_err(chip->dev, + "Failed to update mask reg: %d\n", ret); + return ret; + } + + } else { + dev_warn(chip->dev, "No IRQ configured\n"); + } + + config.dev = chip->dev; + config.regmap = chip->regmap; + + for (i = 0; i < PV88090_MAX_REGULATORS; i++) { + if (init_data) + config.init_data = &init_data[i]; + + if (i == PV88090_ID_BUCK2 || i == PV88090_ID_BUCK3) { + ret = regmap_read(chip->regmap, + pv88090_regulator_info[i].conf2, &conf2); + if (ret < 0) + return ret; + + conf2 = ((conf2 >> PV88090_BUCK_VDAC_RANGE_SHIFT) + && PV88090_BUCK_VDAC_RANGE_MASK); + + ret = regmap_read(chip->regmap, + PV88090_REG_BUCK_FOLD_RANGE, &range); + if (ret < 0) + return ret; + + range = ((range + >> (PV88080_BUCK_VRANGE_GAIN_SHIFT + i - 1)) + && PV88080_BUCK_VRANGE_GAIN_MASK); + index = ((range << 1) | conf2); + + pv88090_regulator_info[i].desc.min_uV + = pv88090_buck_vol[index].min_uV; + pv88090_regulator_info[i].desc.uV_step + = pv88090_buck_vol[index].uV_step; + pv88090_regulator_info[i].desc.n_voltages + = ((pv88090_buck_vol[index].max_uV) + - (pv88090_buck_vol[index].min_uV)) + /(pv88090_buck_vol[index].uV_step) + 1; + } + + config.driver_data = (void *)&pv88090_regulator_info[i]; + chip->rdev[i] = devm_regulator_register(chip->dev, + &pv88090_regulator_info[i].desc, &config); + if (IS_ERR(chip->rdev[i])) { + dev_err(chip->dev, + "Failed to register PV88090 regulator\n"); + return PTR_ERR(chip->rdev[i]); + } + } + + return 0; +} + +static const struct i2c_device_id pv88090_i2c_id[] = { + {"pv88090", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, pv88090_i2c_id); + +#ifdef CONFIG_OF +static const struct of_device_id pv88090_dt_ids[] = { + { .compatible = "pvs,pv88090", .data = &pv88090_i2c_id[0] }, + {}, +}; +MODULE_DEVICE_TABLE(of, pv88090_dt_ids); +#endif + +static struct i2c_driver pv88090_regulator_driver = { + .driver = { + .name = "pv88090", + .of_match_table = of_match_ptr(pv88090_dt_ids), + }, + .probe = pv88090_i2c_probe, + .id_table = pv88090_i2c_id, +}; + +module_i2c_driver(pv88090_regulator_driver); + +MODULE_AUTHOR("James Ban "); +MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88090"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/pv88090-regulator.h b/drivers/regulator/pv88090-regulator.h new file mode 100644 index 000000000000..d7aca8d8266d --- /dev/null +++ b/drivers/regulator/pv88090-regulator.h @@ -0,0 +1,98 @@ +/* + * pv88090-regulator.h - Regulator definitions for PV88090 + * Copyright (C) 2015 Powerventure Semiconductor Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __PV88090_REGISTERS_H__ +#define __PV88090_REGISTERS_H__ + +/* System Control and Event Registers */ +#define PV88090_REG_EVENT_A 0x03 +#define PV88090_REG_MASK_A 0x06 +#define PV88090_REG_MASK_B 0x07 + +/* Regulator Registers */ +#define PV88090_REG_BUCK1_CONF0 0x18 +#define PV88090_REG_BUCK1_CONF1 0x19 +#define PV88090_REG_BUCK1_CONF2 0x1a +#define PV88090_REG_BUCK2_CONF0 0x1b +#define PV88090_REG_BUCK2_CONF1 0x1c +#define PV88090_REG_BUCK2_CONF2 0x58 +#define PV88090_REG_BUCK3_CONF0 0x1d +#define PV88090_REG_BUCK3_CONF1 0x1e +#define PV88090_REG_BUCK3_CONF2 0x5c + +#define PV88090_REG_LDO1_CONT 0x1f +#define PV88090_REG_LDO2_CONT 0x20 +#define PV88090_REG_LDO3_CONT 0x21 +#define PV88090_REG_BUCK_FOLD_RANGE 0x61 + +/* PV88090_REG_EVENT_A (addr=0x03) */ +#define PV88090_E_VDD_FLT 0x01 +#define PV88090_E_OVER_TEMP 0x02 + +/* PV88090_REG_MASK_A (addr=0x06) */ +#define PV88090_M_VDD_FLT 0x01 +#define PV88090_M_OVER_TEMP 0x02 + +/* PV88090_REG_BUCK1_CONF0 (addr=0x18) */ +#define PV88090_BUCK1_EN 0x80 +#define PV88090_VBUCK1_MASK 0x7F +/* PV88090_REG_BUCK2_CONF0 (addr=0x1b) */ +#define PV88090_BUCK2_EN 0x80 +#define PV88090_VBUCK2_MASK 0x7F +/* PV88090_REG_BUCK3_CONF0 (addr=0x1d) */ +#define PV88090_BUCK3_EN 0x80 +#define PV88090_VBUCK3_MASK 0x7F +/* PV88090_REG_LDO1_CONT (addr=0x1f) */ +#define PV88090_LDO1_EN 0x40 +#define PV88090_VLDO1_MASK 0x3F +/* PV88090_REG_LDO2_CONT (addr=0x20) */ +#define PV88090_LDO2_EN 0x40 +#define PV88090_VLDO2_MASK 0x3F + +/* PV88090_REG_BUCK1_CONF1 (addr=0x19) */ +#define PV88090_BUCK1_ILIM_SHIFT 2 +#define PV88090_BUCK1_ILIM_MASK 0x7C +#define PV88090_BUCK1_MODE_MASK 0x03 + +/* PV88090_REG_BUCK2_CONF1 (addr=0x1c) */ +#define PV88090_BUCK2_ILIM_SHIFT 2 +#define PV88090_BUCK2_ILIM_MASK 0x0C +#define PV88090_BUCK2_MODE_MASK 0x03 + +/* PV88090_REG_BUCK3_CONF1 (addr=0x1e) */ +#define PV88090_BUCK3_ILIM_SHIFT 2 +#define PV88090_BUCK3_ILIM_MASK 0x0C +#define PV88090_BUCK3_MODE_MASK 0x03 + +#define PV88090_BUCK_MODE_SLEEP 0x00 +#define PV88090_BUCK_MODE_AUTO 0x01 +#define PV88090_BUCK_MODE_SYNC 0x02 + +/* PV88090_REG_BUCK2_CONF2 (addr=0x58) */ +/* PV88090_REG_BUCK3_CONF2 (addr=0x5c) */ +#define PV88090_BUCK_VDAC_RANGE_SHIFT 7 +#define PV88090_BUCK_VDAC_RANGE_MASK 0x01 + +#define PV88090_BUCK_VDAC_RANGE_1 0x00 +#define PV88090_BUCK_VDAC_RANGE_2 0x01 + +/* PV88090_REG_BUCK_FOLD_RANGE (addr=0x61) */ +#define PV88080_BUCK_VRANGE_GAIN_SHIFT 3 +#define PV88080_BUCK_VRANGE_GAIN_MASK 0x01 + +#define PV88080_BUCK_VRANGE_GAIN_1 0x00 +#define PV88080_BUCK_VRANGE_GAIN_2 0x01 + +#endif /* __PV88090_REGISTERS_H__ */ -- cgit v1.2.3 From 3d751eb057e6ed4e4fbce880c016ad967ba732d2 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Mon, 21 Sep 2015 11:25:40 -0500 Subject: Documentation: dt-bindings: Fix interrupt documentation file path Fix the incorrect interrupt documentation file path in binding docs. Signed-off-by: Andrew F. Davis Acked-by: Lee Jones Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt | 2 +- Documentation/devicetree/bindings/mfd/arizona.txt | 2 +- Documentation/devicetree/bindings/mfd/palmas.txt | 2 +- Documentation/devicetree/bindings/sound/wm8994.txt | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt index dd5d2c0394b1..4d6c8cdc8586 100644 --- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt @@ -24,7 +24,7 @@ controller. - #interrupt-cells : Specifies the number of cells needed to encode an interrupt. Shall be set to 2. The first cell defines the interrupt number, the second encodes the triger flags encoded as described in - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupt-parent : The parent interrupt controller. - interrupts : The interrupt to the parent controller raised when GPIOs generate the interrupts. diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 18be0cbfb456..2c5d0387fe98 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -24,7 +24,7 @@ Required properties: - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - gpio-controller : Indicates this device is a GPIO controller. - #gpio-cells : Must be 2. The first cell is the pin number and the diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt index eda898978d33..8ae1a32bfb7e 100644 --- a/Documentation/devicetree/bindings/mfd/palmas.txt +++ b/Documentation/devicetree/bindings/mfd/palmas.txt @@ -24,7 +24,7 @@ and also the generic series names - #interrupt-cells : should be set to 2 for IRQ number and flags The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupt-parent : The parent interrupt controller. Optional properties: diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt index e045e90a0924..68c4e8d96bed 100644 --- a/Documentation/devicetree/bindings/sound/wm8994.txt +++ b/Documentation/devicetree/bindings/sound/wm8994.txt @@ -30,7 +30,7 @@ Optional properties: - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. The first cell is the IRQ number. The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupts.txt + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - clocks : A list of up to two phandle and clock specifier pairs - clock-names : A list of clock names sorted in the same order as clocks. -- cgit v1.2.3 From 22697acdd72d6749d603cb861d4f6c1c2b583c1b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 19 Nov 2015 09:42:49 +0900 Subject: dt-bindings: Consolidate SRAM bindings from all vendors SRAM bindings for various SoCs, using the mmio-sram genalloc API, are spread over different places - per SoC vendor. Since all of these are quite similar (they depend on mmio-sram) move them to a common place. Suggested-by: Rob Herring Signed-off-by: Krzysztof Kozlowski Cc: Heiko Stuebner Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Kukjin Kim Acked-by: Maxime Ripard Acked-by: Heiko Stuebner Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/arm,scpi.txt | 2 +- .../devicetree/bindings/arm/exynos/smp-sysram.txt | 38 ------------ .../devicetree/bindings/arm/rockchip/pmu-sram.txt | 16 ----- .../devicetree/bindings/arm/rockchip/smp-sram.txt | 30 --------- Documentation/devicetree/bindings/misc/sram.txt | 67 -------------------- .../devicetree/bindings/soc/sunxi/sram.txt | 72 ---------------------- .../devicetree/bindings/sram/rockchip-pmu-sram.txt | 16 +++++ .../devicetree/bindings/sram/rockchip-smp-sram.txt | 30 +++++++++ .../devicetree/bindings/sram/samsung-sram.txt | 38 ++++++++++++ Documentation/devicetree/bindings/sram/sram.txt | 67 ++++++++++++++++++++ .../devicetree/bindings/sram/sunxi-sram.txt | 72 ++++++++++++++++++++++ 11 files changed, 224 insertions(+), 224 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt delete mode 100644 Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt delete mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt delete mode 100644 Documentation/devicetree/bindings/misc/sram.txt delete mode 100644 Documentation/devicetree/bindings/soc/sunxi/sram.txt create mode 100644 Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt create mode 100644 Documentation/devicetree/bindings/sram/rockchip-smp-sram.txt create mode 100644 Documentation/devicetree/bindings/sram/samsung-sram.txt create mode 100644 Documentation/devicetree/bindings/sram/sram.txt create mode 100644 Documentation/devicetree/bindings/sram/sunxi-sram.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt index 86302de67c2c..313dabdc14f9 100644 --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt @@ -63,7 +63,7 @@ Required properties: - compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno The rest of the properties should follow the generic mmio-sram description -found in ../../misc/sysram.txt +found in ../../sram/sram.txt Each sub-node represents the reserved area for SCPI. diff --git a/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt b/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt deleted file mode 100644 index 4a0a4f70a0ce..000000000000 --- a/Documentation/devicetree/bindings/arm/exynos/smp-sysram.txt +++ /dev/null @@ -1,38 +0,0 @@ -Samsung Exynos SYSRAM for SMP bringup: ------------------------------------- - -Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup -of the secondary cores. Once the core gets powered up it executes the -code that is residing at some specific location of the SYSRAM. - -Therefore reserved section sub-nodes have to be added to the mmio-sram -declaration. These nodes are of two types depending upon secure or -non-secure execution environment. - -Required sub-node properties: -- compatible : depending upon boot mode, should be - "samsung,exynos4210-sysram" : for Secure SYSRAM - "samsung,exynos4210-sysram-ns" : for Non-secure SYSRAM - -The rest of the properties should follow the generic mmio-sram discription -found in ../../misc/sysram.txt - -Example: - - sysram@02020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x54000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x54000>; - - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; - - smp-sysram@53000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x53000 0x1000>; - }; - }; diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt b/Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt deleted file mode 100644 index 6b42fda306ff..000000000000 --- a/Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt +++ /dev/null @@ -1,16 +0,0 @@ -Rockchip SRAM for pmu: ------------------------------- - -The sram of pmu is used to store the function of resume from maskrom(the 1st -level loader). This is a common use of the "pmu-sram" because it keeps power -even in low power states in the system. - -Required node properties: -- compatible : should be "rockchip,rk3288-pmu-sram" -- reg : physical base address and the size of the registers window - -Example: - sram@ff720000 { - compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; - reg = <0xff720000 0x1000>; - }; diff --git a/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt b/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt deleted file mode 100644 index d9416fb8db6f..000000000000 --- a/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt +++ /dev/null @@ -1,30 +0,0 @@ -Rockchip SRAM for smp bringup: ------------------------------- - -Rockchip's smp-capable SoCs use the first part of the sram for the bringup -of the cores. Once the core gets powered up it executes the code that is -residing at the very beginning of the sram. - -Therefore a reserved section sub-node has to be added to the mmio-sram -declaration. - -Required sub-node properties: -- compatible : should be "rockchip,rk3066-smp-sram" - -The rest of the properties should follow the generic mmio-sram discription -found in ../../misc/sram.txt - -Example: - - sram: sram@10080000 { - compatible = "mmio-sram"; - reg = <0x10080000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - smp-sram@10080000 { - compatible = "rockchip,rk3066-smp-sram"; - reg = <0x10080000 0x50>; - }; - }; diff --git a/Documentation/devicetree/bindings/misc/sram.txt b/Documentation/devicetree/bindings/misc/sram.txt deleted file mode 100644 index 42ee9438b771..000000000000 --- a/Documentation/devicetree/bindings/misc/sram.txt +++ /dev/null @@ -1,67 +0,0 @@ -Generic on-chip SRAM - -Simple IO memory regions to be managed by the genalloc API. - -Required properties: - -- compatible : mmio-sram - -- reg : SRAM iomem address range - -Reserving sram areas: ---------------------- - -Each child of the sram node specifies a region of reserved memory. Each -child node should use a 'reg' property to specify a specific range of -reserved memory. - -Following the generic-names recommended practice, node names should -reflect the purpose of the node. Unit address (@
) should be -appended to the name. - -Required properties in the sram node: - -- #address-cells, #size-cells : should use the same values as the root node -- ranges : standard definition, should translate from local addresses - within the sram to bus addresses - -Required properties in the area nodes: - -- reg : iomem address range, relative to the SRAM range - -Optional properties in the area nodes: - -- compatible : standard definition, should contain a vendor specific string - in the form ,[-] -- pool : indicates that the particular reserved SRAM area is addressable - and in use by another device or devices -- export : indicates that the reserved SRAM area may be accessed outside - of the kernel, e.g. by bootloader or userspace -- label : the name for the reserved partition, if omitted, the label - is taken from the node name excluding the unit address. - -Example: - -sram: sram@5c000000 { - compatible = "mmio-sram"; - reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */ - - #adress-cells = <1>; - #size-cells = <1>; - ranges = <0 0x5c000000 0x40000>; - - smp-sram@100 { - compatible = "socvendor,smp-sram"; - reg = <0x100 0x50>; - }; - - device-sram@1000 { - reg = <0x1000 0x1000>; - pool; - }; - - exported@20000 { - reg = <0x20000 0x20000>; - export; - }; -}; diff --git a/Documentation/devicetree/bindings/soc/sunxi/sram.txt b/Documentation/devicetree/bindings/soc/sunxi/sram.txt deleted file mode 100644 index 067698112f5f..000000000000 --- a/Documentation/devicetree/bindings/soc/sunxi/sram.txt +++ /dev/null @@ -1,72 +0,0 @@ -Allwinnner SoC SRAM controllers ------------------------------------------------------ - -The SRAM controller found on most Allwinner devices is represented by -a regular node for the SRAM controller itself, with sub-nodes -reprensenting the SRAM handled by the SRAM controller. - -Controller Node ---------------- - -Required properties: -- compatible : "allwinner,sun4i-a10-sram-controller" -- reg : sram controller register offset + length - -SRAM nodes ----------- - -Each SRAM is described using the mmio-sram bindings documented in -Documentation/devicetree/bindings/misc/sram.txt - -Each SRAM will have SRAM sections that are going to be handled by the -SRAM controller as subnodes. These sections are represented following -once again the representation described in the mmio-sram binding. - -The valid sections compatible are: - - allwinner,sun4i-a10-sram-a3-a4 - - allwinner,sun4i-a10-sram-d - -Devices using SRAM sections ---------------------------- - -Some devices need to request to the SRAM controller to map an SRAM for -their exclusive use. - -The relationship between such a device and an SRAM section is -expressed through the allwinner,sram property, that will take a -phandle and an argument. - -This valid values for this argument are: - - 0: CPU - - 1: Device - -Example -------- -sram-controller@01c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; - reg = <0x01c00000 0x30>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sram_a: sram@00000000 { - compatible = "mmio-sram"; - reg = <0x00000000 0xc000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00000000 0xc000>; - - emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; - reg = <0x8000 0x4000>; - status = "disabled"; - }; - }; -}; - -emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-a10-emac"; - ... - - allwinner,sram = <&emac_sram 1>; -}; diff --git a/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt b/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt new file mode 100644 index 000000000000..6b42fda306ff --- /dev/null +++ b/Documentation/devicetree/bindings/sram/rockchip-pmu-sram.txt @@ -0,0 +1,16 @@ +Rockchip SRAM for pmu: +------------------------------ + +The sram of pmu is used to store the function of resume from maskrom(the 1st +level loader). This is a common use of the "pmu-sram" because it keeps power +even in low power states in the system. + +Required node properties: +- compatible : should be "rockchip,rk3288-pmu-sram" +- reg : physical base address and the size of the registers window + +Example: + sram@ff720000 { + compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; + reg = <0xff720000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/sram/rockchip-smp-sram.txt b/Documentation/devicetree/bindings/sram/rockchip-smp-sram.txt new file mode 100644 index 000000000000..800701ecffca --- /dev/null +++ b/Documentation/devicetree/bindings/sram/rockchip-smp-sram.txt @@ -0,0 +1,30 @@ +Rockchip SRAM for smp bringup: +------------------------------ + +Rockchip's smp-capable SoCs use the first part of the sram for the bringup +of the cores. Once the core gets powered up it executes the code that is +residing at the very beginning of the sram. + +Therefore a reserved section sub-node has to be added to the mmio-sram +declaration. + +Required sub-node properties: +- compatible : should be "rockchip,rk3066-smp-sram" + +The rest of the properties should follow the generic mmio-sram discription +found in Documentation/devicetree/bindings/sram/sram.txt + +Example: + + sram: sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smp-sram@10080000 { + compatible = "rockchip,rk3066-smp-sram"; + reg = <0x10080000 0x50>; + }; + }; diff --git a/Documentation/devicetree/bindings/sram/samsung-sram.txt b/Documentation/devicetree/bindings/sram/samsung-sram.txt new file mode 100644 index 000000000000..6bc474b2b885 --- /dev/null +++ b/Documentation/devicetree/bindings/sram/samsung-sram.txt @@ -0,0 +1,38 @@ +Samsung Exynos SYSRAM for SMP bringup: +------------------------------------ + +Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup +of the secondary cores. Once the core gets powered up it executes the +code that is residing at some specific location of the SYSRAM. + +Therefore reserved section sub-nodes have to be added to the mmio-sram +declaration. These nodes are of two types depending upon secure or +non-secure execution environment. + +Required sub-node properties: +- compatible : depending upon boot mode, should be + "samsung,exynos4210-sysram" : for Secure SYSRAM + "samsung,exynos4210-sysram-ns" : for Non-secure SYSRAM + +The rest of the properties should follow the generic mmio-sram discription +found in Documentation/devicetree/bindings/sram/sram.txt + +Example: + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/sram/sram.txt b/Documentation/devicetree/bindings/sram/sram.txt new file mode 100644 index 000000000000..42ee9438b771 --- /dev/null +++ b/Documentation/devicetree/bindings/sram/sram.txt @@ -0,0 +1,67 @@ +Generic on-chip SRAM + +Simple IO memory regions to be managed by the genalloc API. + +Required properties: + +- compatible : mmio-sram + +- reg : SRAM iomem address range + +Reserving sram areas: +--------------------- + +Each child of the sram node specifies a region of reserved memory. Each +child node should use a 'reg' property to specify a specific range of +reserved memory. + +Following the generic-names recommended practice, node names should +reflect the purpose of the node. Unit address (@
) should be +appended to the name. + +Required properties in the sram node: + +- #address-cells, #size-cells : should use the same values as the root node +- ranges : standard definition, should translate from local addresses + within the sram to bus addresses + +Required properties in the area nodes: + +- reg : iomem address range, relative to the SRAM range + +Optional properties in the area nodes: + +- compatible : standard definition, should contain a vendor specific string + in the form ,[-] +- pool : indicates that the particular reserved SRAM area is addressable + and in use by another device or devices +- export : indicates that the reserved SRAM area may be accessed outside + of the kernel, e.g. by bootloader or userspace +- label : the name for the reserved partition, if omitted, the label + is taken from the node name excluding the unit address. + +Example: + +sram: sram@5c000000 { + compatible = "mmio-sram"; + reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */ + + #adress-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5c000000 0x40000>; + + smp-sram@100 { + compatible = "socvendor,smp-sram"; + reg = <0x100 0x50>; + }; + + device-sram@1000 { + reg = <0x1000 0x1000>; + pool; + }; + + exported@20000 { + reg = <0x20000 0x20000>; + export; + }; +}; diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt new file mode 100644 index 000000000000..8d5665468fe7 --- /dev/null +++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt @@ -0,0 +1,72 @@ +Allwinnner SoC SRAM controllers +----------------------------------------------------- + +The SRAM controller found on most Allwinner devices is represented by +a regular node for the SRAM controller itself, with sub-nodes +reprensenting the SRAM handled by the SRAM controller. + +Controller Node +--------------- + +Required properties: +- compatible : "allwinner,sun4i-a10-sram-controller" +- reg : sram controller register offset + length + +SRAM nodes +---------- + +Each SRAM is described using the mmio-sram bindings documented in +Documentation/devicetree/bindings/sram/sram.txt + +Each SRAM will have SRAM sections that are going to be handled by the +SRAM controller as subnodes. These sections are represented following +once again the representation described in the mmio-sram binding. + +The valid sections compatible are: + - allwinner,sun4i-a10-sram-a3-a4 + - allwinner,sun4i-a10-sram-d + +Devices using SRAM sections +--------------------------- + +Some devices need to request to the SRAM controller to map an SRAM for +their exclusive use. + +The relationship between such a device and an SRAM section is +expressed through the allwinner,sram property, that will take a +phandle and an argument. + +This valid values for this argument are: + - 0: CPU + - 1: Device + +Example +------- +sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; + }; +}; + +emac: ethernet@01c0b000 { + compatible = "allwinner,sun4i-a10-emac"; + ... + + allwinner,sram = <&emac_sram 1>; +}; -- cgit v1.2.3 From 2729f62c96fa32c6bec062bf39251929dd6cc759 Mon Sep 17 00:00:00 2001 From: Michael Trimarchi Date: Sun, 15 Nov 2015 11:48:48 +0100 Subject: usb: misc: usb3503: Describe better how to bind clock to the hub Signed-off-by: Michael Trimarchi Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/usb/usb3503.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index 52493b1480e2..c1a0a9191d26 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -18,7 +18,8 @@ Optional properties: - refclk: Clock used for driving REFCLK signal (optional, if not provided the driver assumes that clock signal is always available, its rate is specified by REF_SEL pins and a value from the primary - reference clock frequencies table is used) + reference clock frequencies table is used). Use clocks and + clock-names in order to assign it - refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL pins (optional, if not provided, driver will not set rate of the REFCLK signal and assume that a value from the primary reference @@ -33,4 +34,6 @@ Examples: intn-gpios = <&gpx3 4 1>; reset-gpios = <&gpx3 5 1>; initial-mode = <1>; + clocks = <&clks 80>; + clock-names = "refclk"; }; -- cgit v1.2.3 From 8cc73e58b9d7f421988d99803df055a4db7531bc Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 18 Nov 2015 01:13:20 +0200 Subject: Documentation/devicetree: document OCTEON USB bindings Document device-tree bindings for the USB controller on older OCTEON SOCs (OCTEON, OCTEON+). Signed-off-by: Aaro Koskinen Signed-off-by: Rob Herring --- .../devicetree/bindings/usb/octeon-usb.txt | 62 ++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/octeon-usb.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/octeon-usb.txt b/Documentation/devicetree/bindings/usb/octeon-usb.txt new file mode 100644 index 000000000000..205c8d24d6e3 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/octeon-usb.txt @@ -0,0 +1,62 @@ +OCTEON/OCTEON+ USB BLOCK + +1) Main node + + Required properties: + + - compatible: must be "cavium,octeon-5750-usbn" + + - reg: specifies the physical base address of the USBN block and + the length of the memory mapped region. + + - #address-cells: specifies the number of cells needed to encode an + address. The value must be 2. + + - #size-cells: specifies the number of cells used to represent the size + of an address. The value must be 2. + + - ranges: specifies the translation between child address space and parent + address space. + + - clock-frequency: speed of the USB reference clock. Allowed values are + 12000000, 24000000 or 48000000. + + - cavium,refclk-type: type of the USB reference clock. Allowed values are + "crystal" or "external". + + - refclk-frequency: deprecated, use "clock-frequency". + + - refclk-type: deprecated, use "cavium,refclk-type". + +2) Child node + + The main node must have one child node which describes the built-in + USB controller. + + Required properties: + + - compatible: must be "cavium,octeon-5750-usbc" + + - reg: specifies the physical base address of the USBC block and + the length of the memory mapped region. + + - interrupts: specifies the interrupt number for the USB controller. + +3) Example: + + usbn: usbn@1180068000000 { + compatible = "cavium,octeon-5750-usbn"; + reg = <0x11800 0x68000000 0x0 0x1000>; + ranges; /* Direct mapping */ + #address-cells = <2>; + #size-cells = <2>; + clock-frequency = <12000000>; + cavium,refclk-type = "crystal"; + + usbc@16f0010000000 { + compatible = "cavium,octeon-5750-usbc"; + reg = <0x16f00 0x10000000 0x0 0x80000>; + interrupts = <0 56>; + }; + }; + -- cgit v1.2.3 From 4c9848c8ea5f91092e92839da9b6dd1bcaa5be79 Mon Sep 17 00:00:00 2001 From: Yao Yuan Date: Wed, 18 Nov 2015 17:18:11 +0800 Subject: Documentation: fsl-quadspi: Add fsl,ls1021-qspi compatible string new compatible string: "fsl,ls1021-qspi". Signed-off-by: Yuan Yao Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/mtd/fsl-quadspi.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt index 862aa2f8837a..00c587b3d3ae 100644 --- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt @@ -2,7 +2,8 @@ Required properties: - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi", - "fsl,imx7d-qspi", "fsl,imx6ul-qspi" + "fsl,imx7d-qspi", "fsl,imx6ul-qspi", + "fsl,ls1021-qspi" - reg : the first contains the register location and length, the second contains the memory mapping address and length - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory" -- cgit v1.2.3 From 2193377bdade3bdfac164d7a7217c557a3c0878f Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 18 Nov 2015 12:20:58 +0000 Subject: DT: add Olimex to vendor prefixes This company already provided some products, so add them to the vendor prefix list. Signed-off-by: Stefan Wahren Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 55df1d444e9f..a4f2035569ce 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -161,6 +161,7 @@ nuvoton Nuvoton Technology Corporation nvidia NVIDIA nxp NXP Semiconductors okaya Okaya Electric America, Inc. +olimex OLIMEX Ltd. onnn ON Semiconductor Corp. opencores OpenCores.org option Option NV -- cgit v1.2.3 From bf400242a97697a0c6be8cd5a1a9f8f5c1594d6a Mon Sep 17 00:00:00 2001 From: Songjun Wu Date: Mon, 23 Nov 2015 17:19:58 +0800 Subject: ASoC: Atmel: ClassD: add GCK's parent clock in DT binding Set GCK's parent as audio clock. Signed-off-by: Songjun Wu Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/sound/atmel-classd.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/atmel-classd.txt b/Documentation/devicetree/bindings/sound/atmel-classd.txt index 0018451c4351..549e701cb7a1 100644 --- a/Documentation/devicetree/bindings/sound/atmel-classd.txt +++ b/Documentation/devicetree/bindings/sound/atmel-classd.txt @@ -16,6 +16,10 @@ Required properties: Required elements: "pclk", "gclk" and "aclk". - clocks Please refer to clock-bindings.txt. +- assigned-clocks + Should be <&classd_gclk>. +- assigned-clock-parents + Should be <&audio_pll_pmc>. Optional properties: - pinctrl-names, pinctrl-0 @@ -43,6 +47,8 @@ classd: classd@fc048000 { dma-names = "tx"; clocks = <&classd_clk>, <&classd_gclk>, <&audio_pll_pmc>; clock-names = "pclk", "gclk", "aclk"; + assigned-clocks = <&classd_gclk>; + assigned-clock-parents = <&audio_pll_pmc>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_classd_default>; -- cgit v1.2.3 From 182f4f098efcd112bed074ec84854b8e1a016974 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 24 Nov 2015 20:31:51 +0900 Subject: dt-bindings: ARM: add arm,cortex-a72 compatible string Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/cpus.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 3a07a87fef20..58e240d75169 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -157,6 +157,7 @@ nodes to be present and contain the properties described below. "arm,cortex-a17" "arm,cortex-a53" "arm,cortex-a57" + "arm,cortex-a72" "arm,cortex-m0" "arm,cortex-m0+" "arm,cortex-m1" -- cgit v1.2.3 From d9f43babb998b4061305ec682a423c709a503178 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 24 Nov 2015 16:06:41 +0000 Subject: Documentation: dt: Add bindings for Secure-only devices The existing device tree bindings assume that we are only trying to describe a single address space with a device tree (for ARM, either the Normal or the Secure world). Some uses for device tree need to describe both Normal and Secure worlds in a single device tree. Add documentation of how to do this, by adding extra properties which describe when a device appears differently in the two worlds or when it only appears in one of them. The binding describes the general principles for adding new properties describing the secure world, but for now we only need a single new property, "secure-status", which can be used to annotate devices to indicate that they are only visible in one of the two worlds. The primary expected use of this binding is for a virtual machine like QEMU to describe the VM layout to a TrustZone aware firmware (which would then use the secure-only devices itself, and pass the DT on to a kernel running in the non-secure world, which ignores the secure-only devices and uses the rest). Signed-off-by: Peter Maydell Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/secure.txt | 53 ++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/secure.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/secure.txt b/Documentation/devicetree/bindings/arm/secure.txt new file mode 100644 index 000000000000..e31303fb233a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/secure.txt @@ -0,0 +1,53 @@ +* ARM Secure world bindings + +ARM CPUs with TrustZone support have two distinct address spaces, +"Normal" and "Secure". Most devicetree consumers (including the Linux +kernel) are not TrustZone aware and run entirely in either the Normal +world or the Secure world. However some devicetree consumers are +TrustZone aware and need to be able to determine whether devices are +visible only in the Secure address space, only in the Normal address +space, or visible in both. (One example of that situation would be a +virtual machine which boots Secure firmware and wants to tell the +firmware about the layout of the machine via devicetree.) + +The general principle of the naming scheme for Secure world bindings +is that any property that needs a different value in the Secure world +can be supported by prefixing the property name with "secure-". So for +instance "secure-foo" would override "foo". For property names with +a vendor prefix, the Secure variant of "vendor,foo" would be +"vendor,secure-foo". If there is no "secure-" property then the Secure +world value is the same as specified for the Normal world by the +non-prefixed property. However, only the properties listed below may +validly have "secure-" versions; this list will be enlarged on a +case-by-case basis. + +Defining the bindings in this way means that a device tree which has +been annotated to indicate the presence of Secure-only devices can +still be processed unmodified by existing Non-secure software (and in +particular by the kernel). + +Note that it is still valid for bindings intended for purely Secure +world consumers (like kernels that run entirely in Secure) to simply +describe the view of Secure world using the standard bindings. These +secure- bindings only need to be used where both the Secure and Normal +world views need to be described in a single device tree. + +Valid Secure world properties: + +- secure-status : specifies whether the device is present and usable + in the secure world. The combination of this with "status" allows + the various possible combinations of device visibility to be + specified. If "secure-status" is not specified it defaults to the + same value as "status"; if "status" is not specified either then + both default to "okay". This means the following combinations are + possible: + + /* Neither specified: default to visible in both S and NS */ + secure-status = "okay"; /* visible in both */ + status = "okay"; /* visible in both */ + status = "okay"; secure-status = "okay"; /* visible in both */ + secure-status = "disabled"; /* NS-only */ + status = "okay"; secure-status = "disabled"; /* NS-only */ + status = "disabled"; secure-status = "okay"; /* S-only */ + status = "disabled"; /* disabled in both */ + status = "disabled"; secure-status = "disabled"; /* disabled in both */ -- cgit v1.2.3 From ef8322427e6bb956992079e3b5fac57e65a6b5d3 Mon Sep 17 00:00:00 2001 From: Alban Bedel Date: Sun, 29 Nov 2015 13:40:11 +0100 Subject: dt-bindings: Misc fix for the ATH79 MISC interrupt controllers Add a missing quote in the example Signed-off-by: Alban Bedel CC: trivial@kernel.org Signed-off-by: Rob Herring --- .../devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt index ec96b1f01478..475ae9bd562b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt @@ -22,7 +22,7 @@ Interrupt Controllers bindings used by client devices. Example: interrupt-controller@18060010 { - compatible = "qca,ar9132-misc-intc", qca,ar7100-misc-intc"; + compatible = "qca,ar9132-misc-intc", "qca,ar7100-misc-intc"; reg = <0x18060010 0x4>; interrupt-parent = <&cpuintc>; -- cgit v1.2.3 From 1da2f213cfaef8e3b8a93c7779d96691d226083b Mon Sep 17 00:00:00 2001 From: Alban Bedel Date: Sun, 29 Nov 2015 13:40:12 +0100 Subject: dt-bindings: Misc fix for the ATH79 DDR controllers Fix a few typos and reword the description of the '#qca,ddr-wb-channel-cells' property. Signed-off-by: Alban Bedel CC: trivial@kernel.org Signed-off-by: Rob Herring --- .../bindings/memory-controllers/ath79-ddr-controller.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt b/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt index efe35a065714..c81af75bcd88 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt @@ -1,6 +1,6 @@ Binding for Qualcomm Atheros AR7xxx/AR9xxx DDR controller -The DDR controller of the ARxxx and AR9xxx families provides an interface +The DDR controller of the AR7xxx and AR9xxx families provides an interface to flush the FIFO between various devices and the DDR. This is mainly used by the IRQ controller to flush the FIFO before running the interrupt handler of such devices. @@ -11,9 +11,9 @@ Required properties: "qca,[ar7100|ar7240]-ddr-controller" as fallback. On SoC with PCI support "qca,ar7100-ddr-controller" should be used as fallback, otherwise "qca,ar7240-ddr-controller" should be used. -- reg: Base address and size of the controllers memory area -- #qca,ddr-wb-channel-cells: has to be 1, the index of the write buffer - channel +- reg: Base address and size of the controller's memory area +- #qca,ddr-wb-channel-cells: Specifies the number of cells needed to encode + the write buffer channel index, should be 1. Example: -- cgit v1.2.3 From d6403108aaf413c9677040c20519e5c14c2f6f7c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 30 Nov 2015 14:51:46 +0100 Subject: net/macb: bindings doc: Merge cdns-emac to macb Merge two bindings for the same driver to together. Signed-off-by: Michal Simek Acked-by: Nicolas Ferre Acked-by: Moritz Fischer Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/net/cdns-emac.txt | 20 -------------------- Documentation/devicetree/bindings/net/macb.txt | 3 +++ 2 files changed, 3 insertions(+), 20 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/cdns-emac.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/cdns-emac.txt b/Documentation/devicetree/bindings/net/cdns-emac.txt deleted file mode 100644 index 4451ee973223..000000000000 --- a/Documentation/devicetree/bindings/net/cdns-emac.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Cadence EMAC Ethernet controller - -Required properties: -- compatible: Should be "cdns,[-]{emac}" - Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. - Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC. - Or the generic form: "cdns,emac". -- reg: Address and length of the register set for the device -- interrupts: Should contain macb interrupt -- phy-mode: see ethernet.txt file in the same directory. - -Examples: - - macb0: ethernet@fffc4000 { - compatible = "cdns,at91rm9200-emac"; - reg = <0xfffc4000 0x4000>; - interrupts = <21>; - phy-mode = "rmii"; - local-mac-address = [3a 0e 03 04 05 06]; - }; diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index b5d79761ac97..1361a6daf63f 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -2,6 +2,7 @@ Required properties: - compatible: Should be "cdns,[-]{macb|gem}" + Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP available on sama5d3 SoCs. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". @@ -10,7 +11,9 @@ Required properties: Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs. Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs. Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs. + Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC. Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC. + Or the generic form: "cdns,emac". - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt - phy-mode: See ethernet.txt file in the same directory. -- cgit v1.2.3 From e9e5f6365073b5f717172834986df8e2ec5a80b4 Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Wed, 2 Dec 2015 11:35:39 +0000 Subject: dt-bindings: tda998x: Document the required 'port' node. All the users of the tda998x driver are component based and bind the driver via the device graph method described in Documentation/devicetree/bindings/graph.txt. Add the fact that the 'port' node is required to the bindings. Signed-off-by: Liviu Dudau Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/display/bridge/tda998x.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt index e9e4bce40760..e178e6b9f9ee 100644 --- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt +++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt @@ -5,6 +5,10 @@ Required properties; - reg: I2C address +Required node: + - port: Input port node with endpoint definition, as described + in Documentation/devicetree/bindings/graph.txt + Optional properties: - interrupts: interrupt number and trigger type default: polling -- cgit v1.2.3 From d135d1c158618c73346a898b6a08018013e43715 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Wed, 9 Dec 2015 20:40:58 +0000 Subject: doc: dt: mtd: brcmnand: Add brcm,bcm6368-nand device tree binding Add device tree binding for NAND on the BCM6368. The BCM6368 has a NAND interrupt register with combined status and enable registers. It also requires a clock, so add an optional clock to the common brcmnand binding. Signed-off-by: Simon Arlott Reviewed-by: Florian Fainelli Acked-by: Rob Herring Signed-off-by: Brian Norris --- .../devicetree/bindings/mtd/brcm,brcmnand.txt | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt index 4ff7128ee3b2..c2546ced9c02 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt @@ -45,6 +45,8 @@ Required properties: - #size-cells : <0> Optional properties: +- clock : reference to the clock for the NAND controller +- clock-names : "nand" (required for the above clock) - brcm,nand-has-wp : Some versions of this IP include a write-protect (WP) control bit. It is always available on >= v7.0. Use this property to describe the rare @@ -72,6 +74,12 @@ we define additional 'compatible' properties and associated register resources w and enable registers - reg-names: (required) "nand-int-base" + * "brcm,nand-bcm6368" + - compatible: should contain "brcm,nand-bcm", "brcm,nand-bcm6368" + - reg: (required) the 'NAND_INTR_BASE' register range, with combined status + and enable registers, and boot address registers + - reg-names: (required) "nand-int-base" + * "brcm,nand-iproc" - reg: (required) the "IDM" register range, for interrupt enable and APB bus access endianness configuration, and the "EXT" register range, @@ -148,3 +156,27 @@ nand@f0442800 { }; }; }; + +nand@10000200 { + compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368", + "brcm,brcmnand-v4.0", "brcm,brcmnand"; + reg = <0x10000200 0x180>, + <0x10000600 0x200>, + <0x100000b0 0x10>; + reg-names = "nand", "nand-cache", "nand-int-base"; + interrupt-parent = <&periph_intc>; + interrupts = <50>; + clocks = <&periph_clk 20>; + clock-names = "nand"; + + #address-cells = <1>; + #size-cells = <0>; + + nand0: nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <1>; + nand-ecc-step-size = <512>; + }; +}; -- cgit v1.2.3 From 0b2eed49875ec3605b7a71bdf05adc8c1cbd49fc Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 2 Dec 2015 14:53:54 +0900 Subject: dmaengine: usb-dmac: Document SoC specific compatibility strings In general Renesas hardware is not documented to the extent where the relationship between IP blocks on different SoCs can be assumed although they may appear to operate the same way. Furthermore the documentation typically does not specify a version for individual IP blocks. For these reasons a convention of using the SoC name in place of a version and providing SoC-specific compatibility strings has been adopted. Although not universally liked this convention is used in the bindings for most drivers for Renesas hardware. The purpose of this patch is to update the Renesas USB DMA Controller driver to follow this convention. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring Acked-by: Yoshihiro Shimoda Signed-off-by: Simon Horman Signed-off-by: Vinod Koul --- Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt index 040f365954cc..e7780a186a36 100644 --- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt @@ -1,7 +1,13 @@ * Renesas USB DMA Controller Device Tree bindings Required Properties: -- compatible: must contain "renesas,usb-dmac" +-compatible: "renesas,-usb-dmac", "renesas,usb-dmac" as fallback. + Examples with soctypes are: + - "renesas,r8a7790-usb-dmac" (R-Car H2) + - "renesas,r8a7791-usb-dmac" (R-Car M2-W) + - "renesas,r8a7793-usb-dmac" (R-Car M2-N) + - "renesas,r8a7794-usb-dmac" (R-Car E2) + - "renesas,r8a7795-usb-dmac" (R-Car H3) - reg: base address and length of the registers block for the DMAC - interrupts: interrupt specifiers for the DMAC, one for each entry in interrupt-names. @@ -15,7 +21,7 @@ Required Properties: Example: R8A7790 (R-Car H2) USB-DMACs usb_dmac0: dma-controller@e65a0000 { - compatible = "renesas,usb-dmac"; + compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH 0 109 IRQ_TYPE_LEVEL_HIGH>; -- cgit v1.2.3 From b41fa86b67bd338d4ffa0b69f0fb1c3013a489e0 Mon Sep 17 00:00:00 2001 From: Oliver Stäbler Date: Wed, 9 Dec 2015 10:24:04 +0100 Subject: iio:adc128s052: add support for adc124s021 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Oliver Stäbler Reviewed-by: Martin Kepplinger Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt | 4 ++-- drivers/iio/adc/Kconfig | 6 +++--- drivers/iio/adc/ti-adc128s052.c | 13 ++++++++++++- 3 files changed, 17 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt index 15ca6b47958e..daa2b2c29428 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt @@ -1,7 +1,7 @@ -* Texas Instruments' ADC128S052 and ADC122S021 ADC chip +* Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip Required properties: - - compatible: Should be "ti,adc128s052" or "ti,adc122s021" + - compatible: Should be "ti,adc128s052", "ti,adc122s021" or "ti,adc124s021" - reg: spi chip select number for the device - vref-supply: The regulator supply for ADC reference voltage diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 9162dfefff30..57e3ca0b7ff4 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -332,11 +332,11 @@ config TI_ADC081C called ti-adc081c. config TI_ADC128S052 - tristate "Texas Instruments ADC128S052/ADC122S021" + tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021" depends on SPI help - If you say yes here you get support for Texas Instruments ADC128S052 - and ADC122S021 chips. + If you say yes here you get support for Texas Instruments ADC128S052, + ADC122S021 and ADC124S021 chips. This driver can also be built as a module. If so, the module will be called ti-adc128s052. diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c index ff6f7f63c8d9..bc58867d6e8d 100644 --- a/drivers/iio/adc/ti-adc128s052.c +++ b/drivers/iio/adc/ti-adc128s052.c @@ -1,10 +1,11 @@ /* * Copyright (C) 2014 Angelo Compagnucci * - * Driver for Texas Instruments' ADC128S052 and ADC122S021 ADC chip. + * Driver for Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip. * Datasheets can be found here: * http://www.ti.com/lit/ds/symlink/adc128s052.pdf * http://www.ti.com/lit/ds/symlink/adc122s021.pdf + * http://www.ti.com/lit/ds/symlink/adc124s021.pdf * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -114,9 +115,17 @@ static const struct iio_chan_spec adc122s021_channels[] = { ADC128_VOLTAGE_CHANNEL(1), }; +static const struct iio_chan_spec adc124s021_channels[] = { + ADC128_VOLTAGE_CHANNEL(0), + ADC128_VOLTAGE_CHANNEL(1), + ADC128_VOLTAGE_CHANNEL(2), + ADC128_VOLTAGE_CHANNEL(3), +}; + static const struct adc128_configuration adc128_config[] = { { adc128s052_channels, ARRAY_SIZE(adc128s052_channels) }, { adc122s021_channels, ARRAY_SIZE(adc122s021_channels) }, + { adc124s021_channels, ARRAY_SIZE(adc124s021_channels) }, }; static const struct iio_info adc128_info = { @@ -177,6 +186,7 @@ static int adc128_remove(struct spi_device *spi) static const struct of_device_id adc128_of_match[] = { { .compatible = "ti,adc128s052", }, { .compatible = "ti,adc122s021", }, + { .compatible = "ti,adc124s021", }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, adc128_of_match); @@ -184,6 +194,7 @@ MODULE_DEVICE_TABLE(of, adc128_of_match); static const struct spi_device_id adc128_id[] = { { "adc128s052", 0}, /* index into adc128_config */ { "adc122s021", 1}, + { "adc124s021", 2}, { } }; MODULE_DEVICE_TABLE(spi, adc128_id); -- cgit v1.2.3 From 4d33615df58bf308626489cbfb8acbc8bbd45658 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Wed, 9 Dec 2015 22:04:49 -0800 Subject: iio: light: add MAX30100 oximeter driver support MAX30100 is an heart rate and pulse oximeter sensor that works using two LEDS of different wavelengths, and detecting the light reflected back. This patchset adds support for both IR and RED LED channels which can be processed in userspace to determine heart rate and blood oxygen levels. Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/iio/health/max30100.txt | 21 + drivers/iio/Kconfig | 1 + drivers/iio/Makefile | 1 + drivers/iio/health/Kconfig | 21 + drivers/iio/health/Makefile | 7 + drivers/iio/health/max30100.c | 453 +++++++++++++++++++++ 6 files changed, 504 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/health/max30100.txt create mode 100644 drivers/iio/health/Kconfig create mode 100644 drivers/iio/health/Makefile create mode 100644 drivers/iio/health/max30100.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt new file mode 100644 index 000000000000..f6fbac66ad06 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/health/max30100.txt @@ -0,0 +1,21 @@ +Maxim MAX30100 heart rate and pulse oximeter sensor + +* https://datasheets.maximintegrated.com/en/ds/MAX30100.pdf + +Required properties: + - compatible: must be "maxim,max30100" + - reg: the I2C address of the sensor + - interrupt-parent: should be the phandle for the interrupt controller + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic + interrupt client node bindings. + +Example: + +max30100@057 { + compatible = "maxim,max30100"; + reg = <57>; + interrupt-parent = <&gpio1>; + interrupts = <16 2>; +}; diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index ac8715e56ba1..505e921f0b19 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -69,6 +69,7 @@ source "drivers/iio/dac/Kconfig" source "drivers/iio/dummy/Kconfig" source "drivers/iio/frequency/Kconfig" source "drivers/iio/gyro/Kconfig" +source "drivers/iio/health/Kconfig" source "drivers/iio/humidity/Kconfig" source "drivers/iio/imu/Kconfig" source "drivers/iio/light/Kconfig" diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index f670b82298aa..20f649073462 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -21,6 +21,7 @@ obj-y += dac/ obj-y += dummy/ obj-y += gyro/ obj-y += frequency/ +obj-y += health/ obj-y += humidity/ obj-y += imu/ obj-y += light/ diff --git a/drivers/iio/health/Kconfig b/drivers/iio/health/Kconfig new file mode 100644 index 000000000000..a647679da805 --- /dev/null +++ b/drivers/iio/health/Kconfig @@ -0,0 +1,21 @@ +# +# Health sensors +# +# When adding new entries keep the list in alphabetical order + +menu "Health sensors" + +config MAX30100 + tristate "MAX30100 heart rate and pulse oximeter sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_KFIFO_BUF + help + Say Y here to build I2C interface support for the Maxim + MAX30100 heart rate, and pulse oximeter sensor. + + To compile this driver as a module, choose M here: the + module will be called max30100. + +endmenu diff --git a/drivers/iio/health/Makefile b/drivers/iio/health/Makefile new file mode 100644 index 000000000000..7c475d7faad8 --- /dev/null +++ b/drivers/iio/health/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for IIO Health sensors +# + +# When adding new entries keep the list in alphabetical order + +obj-$(CONFIG_MAX30100) += max30100.o diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c new file mode 100644 index 000000000000..9d1c81f91dd7 --- /dev/null +++ b/drivers/iio/health/max30100.c @@ -0,0 +1,453 @@ +/* + * max30100.c - Support for MAX30100 heart rate and pulse oximeter sensor + * + * Copyright (C) 2015 Matt Ranostay + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * TODO: allow LED current and pulse length controls via device tree properties + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX30100_REGMAP_NAME "max30100_regmap" +#define MAX30100_DRV_NAME "max30100" + +#define MAX30100_REG_INT_STATUS 0x00 +#define MAX30100_REG_INT_STATUS_PWR_RDY BIT(0) +#define MAX30100_REG_INT_STATUS_SPO2_RDY BIT(4) +#define MAX30100_REG_INT_STATUS_HR_RDY BIT(5) +#define MAX30100_REG_INT_STATUS_FIFO_RDY BIT(7) + +#define MAX30100_REG_INT_ENABLE 0x01 +#define MAX30100_REG_INT_ENABLE_SPO2_EN BIT(0) +#define MAX30100_REG_INT_ENABLE_HR_EN BIT(1) +#define MAX30100_REG_INT_ENABLE_FIFO_EN BIT(3) +#define MAX30100_REG_INT_ENABLE_MASK 0xf0 +#define MAX30100_REG_INT_ENABLE_MASK_SHIFT 4 + +#define MAX30100_REG_FIFO_WR_PTR 0x02 +#define MAX30100_REG_FIFO_OVR_CTR 0x03 +#define MAX30100_REG_FIFO_RD_PTR 0x04 +#define MAX30100_REG_FIFO_DATA 0x05 +#define MAX30100_REG_FIFO_DATA_ENTRY_COUNT 16 +#define MAX30100_REG_FIFO_DATA_ENTRY_LEN 4 + +#define MAX30100_REG_MODE_CONFIG 0x06 +#define MAX30100_REG_MODE_CONFIG_MODE_SPO2_EN BIT(0) +#define MAX30100_REG_MODE_CONFIG_MODE_HR_EN BIT(1) +#define MAX30100_REG_MODE_CONFIG_MODE_MASK 0x03 +#define MAX30100_REG_MODE_CONFIG_TEMP_EN BIT(3) +#define MAX30100_REG_MODE_CONFIG_PWR BIT(7) + +#define MAX30100_REG_SPO2_CONFIG 0x07 +#define MAX30100_REG_SPO2_CONFIG_100HZ BIT(2) +#define MAX30100_REG_SPO2_CONFIG_HI_RES_EN BIT(6) +#define MAX30100_REG_SPO2_CONFIG_1600US 0x3 + +#define MAX30100_REG_LED_CONFIG 0x09 +#define MAX30100_REG_LED_CONFIG_RED_LED_SHIFT 4 + +#define MAX30100_REG_LED_CONFIG_24MA 0x07 +#define MAX30100_REG_LED_CONFIG_50MA 0x0f + +#define MAX30100_REG_TEMP_INTEGER 0x16 +#define MAX30100_REG_TEMP_FRACTION 0x17 + +struct max30100_data { + struct i2c_client *client; + struct iio_dev *indio_dev; + struct mutex lock; + struct regmap *regmap; + + __be16 buffer[2]; /* 2 16-bit channels */ +}; + +static bool max30100_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX30100_REG_INT_STATUS: + case MAX30100_REG_MODE_CONFIG: + case MAX30100_REG_FIFO_WR_PTR: + case MAX30100_REG_FIFO_OVR_CTR: + case MAX30100_REG_FIFO_RD_PTR: + case MAX30100_REG_FIFO_DATA: + case MAX30100_REG_TEMP_INTEGER: + case MAX30100_REG_TEMP_FRACTION: + return true; + default: + return false; + } +} + +static const struct regmap_config max30100_regmap_config = { + .name = MAX30100_REGMAP_NAME, + + .reg_bits = 8, + .val_bits = 8, + + .max_register = MAX30100_REG_TEMP_FRACTION, + .cache_type = REGCACHE_FLAT, + + .volatile_reg = max30100_is_volatile_reg, +}; + +static const unsigned long max30100_scan_masks[] = {0x3, 0}; + +static const struct iio_chan_spec max30100_channels[] = { + { + .type = IIO_INTENSITY, + .channel2 = IIO_MOD_LIGHT_IR, + .modified = 1, + + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + }, + { + .type = IIO_INTENSITY, + .channel2 = IIO_MOD_LIGHT_RED, + .modified = 1, + + .scan_index = 1, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + }, + { + .type = IIO_TEMP, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = -1, + }, +}; + +static int max30100_set_powermode(struct max30100_data *data, bool state) +{ + return regmap_update_bits(data->regmap, MAX30100_REG_MODE_CONFIG, + MAX30100_REG_MODE_CONFIG_PWR, + state ? 0 : MAX30100_REG_MODE_CONFIG_PWR); +} + +static int max30100_clear_fifo(struct max30100_data *data) +{ + int ret; + + ret = regmap_write(data->regmap, MAX30100_REG_FIFO_WR_PTR, 0); + if (ret) + return ret; + + ret = regmap_write(data->regmap, MAX30100_REG_FIFO_OVR_CTR, 0); + if (ret) + return ret; + + return regmap_write(data->regmap, MAX30100_REG_FIFO_RD_PTR, 0); +} + +static int max30100_buffer_postenable(struct iio_dev *indio_dev) +{ + struct max30100_data *data = iio_priv(indio_dev); + int ret; + + ret = max30100_set_powermode(data, true); + if (ret) + return ret; + + return max30100_clear_fifo(data); +} + +static int max30100_buffer_predisable(struct iio_dev *indio_dev) +{ + struct max30100_data *data = iio_priv(indio_dev); + + return max30100_set_powermode(data, false); +} + +static const struct iio_buffer_setup_ops max30100_buffer_setup_ops = { + .postenable = max30100_buffer_postenable, + .predisable = max30100_buffer_predisable, +}; + +static inline int max30100_fifo_count(struct max30100_data *data) +{ + unsigned int val; + int ret; + + ret = regmap_read(data->regmap, MAX30100_REG_INT_STATUS, &val); + if (ret) + return ret; + + /* FIFO is almost full */ + if (val & MAX30100_REG_INT_STATUS_FIFO_RDY) + return MAX30100_REG_FIFO_DATA_ENTRY_COUNT - 1; + + return 0; +} + +static int max30100_read_measurement(struct max30100_data *data) +{ + int ret; + + ret = i2c_smbus_read_i2c_block_data(data->client, + MAX30100_REG_FIFO_DATA, + MAX30100_REG_FIFO_DATA_ENTRY_LEN, + (u8 *) &data->buffer); + + return (ret == MAX30100_REG_FIFO_DATA_ENTRY_LEN) ? 0 : ret; +} + +static irqreturn_t max30100_interrupt_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct max30100_data *data = iio_priv(indio_dev); + int ret, cnt = 0; + + mutex_lock(&data->lock); + + while (cnt-- || (cnt = max30100_fifo_count(data) > 0)) { + ret = max30100_read_measurement(data); + if (ret) + break; + + iio_push_to_buffers(data->indio_dev, data->buffer); + } + + mutex_unlock(&data->lock); + + return IRQ_HANDLED; +} + +static int max30100_chip_init(struct max30100_data *data) +{ + int ret; + + /* RED IR LED = 24mA, IR LED = 50mA */ + ret = regmap_write(data->regmap, MAX30100_REG_LED_CONFIG, + (MAX30100_REG_LED_CONFIG_24MA << + MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) | + MAX30100_REG_LED_CONFIG_50MA); + if (ret) + return ret; + + /* enable hi-res SPO2 readings at 100Hz */ + ret = regmap_write(data->regmap, MAX30100_REG_SPO2_CONFIG, + MAX30100_REG_SPO2_CONFIG_HI_RES_EN | + MAX30100_REG_SPO2_CONFIG_100HZ); + if (ret) + return ret; + + /* enable SPO2 mode */ + ret = regmap_update_bits(data->regmap, MAX30100_REG_MODE_CONFIG, + MAX30100_REG_MODE_CONFIG_MODE_MASK, + MAX30100_REG_MODE_CONFIG_MODE_HR_EN | + MAX30100_REG_MODE_CONFIG_MODE_SPO2_EN); + if (ret) + return ret; + + /* enable FIFO interrupt */ + return regmap_update_bits(data->regmap, MAX30100_REG_INT_ENABLE, + MAX30100_REG_INT_ENABLE_MASK, + MAX30100_REG_INT_ENABLE_FIFO_EN + << MAX30100_REG_INT_ENABLE_MASK_SHIFT); +} + +static int max30100_read_temp(struct max30100_data *data, int *val) +{ + int ret; + unsigned int reg; + + ret = regmap_read(data->regmap, MAX30100_REG_TEMP_INTEGER, ®); + if (ret < 0) + return ret; + *val = reg << 4; + + ret = regmap_read(data->regmap, MAX30100_REG_TEMP_FRACTION, ®); + if (ret < 0) + return ret; + + *val |= reg & 0xf; + *val = sign_extend32(*val, 11); + + return 0; +} + +static int max30100_get_temp(struct max30100_data *data, int *val) +{ + int ret; + + /* start acquisition */ + ret = regmap_update_bits(data->regmap, MAX30100_REG_MODE_CONFIG, + MAX30100_REG_MODE_CONFIG_TEMP_EN, + MAX30100_REG_MODE_CONFIG_TEMP_EN); + if (ret) + return ret; + + usleep_range(35000, 50000); + + return max30100_read_temp(data, val); +} + +static int max30100_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct max30100_data *data = iio_priv(indio_dev); + int ret = -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + /* + * Temperature reading can only be acquired while engine + * is running + */ + mutex_lock(&indio_dev->mlock); + + if (!iio_buffer_enabled(indio_dev)) + ret = -EAGAIN; + else { + ret = max30100_get_temp(data, val); + if (!ret) + ret = IIO_VAL_INT; + + } + + mutex_unlock(&indio_dev->mlock); + break; + case IIO_CHAN_INFO_SCALE: + *val = 1; /* 0.0625 */ + *val2 = 16; + ret = IIO_VAL_FRACTIONAL; + break; + } + + return ret; +} + +static const struct iio_info max30100_info = { + .driver_module = THIS_MODULE, + .read_raw = max30100_read_raw, +}; + +static int max30100_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max30100_data *data; + struct iio_buffer *buffer; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + buffer = devm_iio_kfifo_allocate(&client->dev); + if (!buffer) + return -ENOMEM; + + iio_device_attach_buffer(indio_dev, buffer); + + indio_dev->name = MAX30100_DRV_NAME; + indio_dev->channels = max30100_channels; + indio_dev->info = &max30100_info; + indio_dev->num_channels = ARRAY_SIZE(max30100_channels); + indio_dev->available_scan_masks = max30100_scan_masks; + indio_dev->modes = (INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE); + indio_dev->setup_ops = &max30100_buffer_setup_ops; + + data = iio_priv(indio_dev); + data->indio_dev = indio_dev; + data->client = client; + + mutex_init(&data->lock); + i2c_set_clientdata(client, indio_dev); + + data->regmap = devm_regmap_init_i2c(client, &max30100_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "regmap initialization failed.\n"); + return PTR_ERR(data->regmap); + } + max30100_set_powermode(data, false); + + ret = max30100_chip_init(data); + if (ret) + return ret; + + if (client->irq <= 0) { + dev_err(&client->dev, "no valid irq defined\n"); + return -EINVAL; + } + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, max30100_interrupt_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "max30100_irq", indio_dev); + if (ret) { + dev_err(&client->dev, "request irq (%d) failed\n", client->irq); + return ret; + } + + return iio_device_register(indio_dev); +} + +static int max30100_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct max30100_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + max30100_set_powermode(data, false); + + return 0; +} + +static const struct i2c_device_id max30100_id[] = { + { "max30100", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, max30100_id); + +static const struct of_device_id max30100_dt_ids[] = { + { .compatible = "maxim,max30100" }, + { } +}; +MODULE_DEVICE_TABLE(of, max30100_dt_ids); + +static struct i2c_driver max30100_driver = { + .driver = { + .name = MAX30100_DRV_NAME, + .of_match_table = of_match_ptr(max30100_dt_ids), + }, + .probe = max30100_probe, + .remove = max30100_remove, + .id_table = max30100_id, +}; +module_i2c_driver(max30100_driver); + +MODULE_AUTHOR("Matt Ranostay "); +MODULE_DESCRIPTION("MAX30100 heart rate and pulse oximeter sensor"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 466df4d0c1a5edee243698bdcad1ec4f3a1799b1 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Sat, 5 Dec 2015 22:58:22 -0800 Subject: iio: chemical: add AMS iAQ-core support Add support for AMS iAQ-core continuous and pulsed VOC sensors. Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/i2c/trivial-devices.txt | 1 + drivers/iio/chemical/Kconfig | 8 + drivers/iio/chemical/Makefile | 1 + drivers/iio/chemical/ams-iaq-core.c | 200 +++++++++++++++++++++ 4 files changed, 210 insertions(+) create mode 100644 drivers/iio/chemical/ams-iaq-core.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index c50cf13c852e..f6fec952d683 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -20,6 +20,7 @@ adi,adt7476 +/-1C TDM Extended Temp Range I.C adi,adt7490 +/-1C TDM Extended Temp Range I.C adi,adxl345 Three-Axis Digital Accelerometer adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) +ams,iaq-core AMS iAQ-Core VOC Sensor at,24c08 i2c serial eeprom (24cxx) atmel,24c00 i2c serial eeprom (24cxx) atmel,24c01 i2c serial eeprom (24cxx) diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index 3061b7299f0f..f16de61be46d 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -4,6 +4,14 @@ menu "Chemical Sensors" +config IAQCORE + tristate "AMS iAQ-Core VOC sensors" + depends on I2C + help + Say Y here to build I2C interface support for the AMS + iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds) + sensors + config VZ89X tristate "SGX Sensortech MiCS VZ89X VOC sensor" depends on I2C diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile index 7292f2ded587..167861fadfab 100644 --- a/drivers/iio/chemical/Makefile +++ b/drivers/iio/chemical/Makefile @@ -3,4 +3,5 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_IAQCORE) += ams-iaq-core.o obj-$(CONFIG_VZ89X) += vz89x.o diff --git a/drivers/iio/chemical/ams-iaq-core.c b/drivers/iio/chemical/ams-iaq-core.c new file mode 100644 index 000000000000..41a8e6f2e31d --- /dev/null +++ b/drivers/iio/chemical/ams-iaq-core.c @@ -0,0 +1,200 @@ +/* + * ams-iaq-core.c - Support for AMS iAQ-Core VOC sensors + * + * Copyright (C) 2015 Matt Ranostay + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include + +#define AMS_IAQCORE_DATA_SIZE 9 + +#define AMS_IAQCORE_VOC_CO2_IDX 0 +#define AMS_IAQCORE_VOC_RESISTANCE_IDX 1 +#define AMS_IAQCORE_VOC_TVOC_IDX 2 + +struct ams_iaqcore_reading { + __be16 co2_ppm; + u8 status; + __be32 resistance; + __be16 voc_ppb; +} __attribute__((__packed__)); + +struct ams_iaqcore_data { + struct i2c_client *client; + struct mutex lock; + unsigned long last_update; + + struct ams_iaqcore_reading buffer; +}; + +static const struct iio_chan_spec ams_iaqcore_channels[] = { + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_CO2, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = AMS_IAQCORE_VOC_CO2_IDX, + }, + { + .type = IIO_RESISTANCE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = AMS_IAQCORE_VOC_RESISTANCE_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = AMS_IAQCORE_VOC_TVOC_IDX, + }, +}; + +static int ams_iaqcore_read_measurement(struct ams_iaqcore_data *data) +{ + struct i2c_client *client = data->client; + int ret; + + struct i2c_msg msg = { + .addr = client->addr, + .flags = client->flags | I2C_M_RD, + .len = AMS_IAQCORE_DATA_SIZE, + .buf = (char *) &data->buffer, + }; + + ret = i2c_transfer(client->adapter, &msg, 1); + + return (ret == AMS_IAQCORE_DATA_SIZE) ? 0 : ret; +} + +static int ams_iaqcore_get_measurement(struct ams_iaqcore_data *data) +{ + int ret; + + /* sensor can only be polled once a second max per datasheet */ + if (!time_after(jiffies, data->last_update + HZ)) + return 0; + + ret = ams_iaqcore_read_measurement(data); + if (ret < 0) + return ret; + + data->last_update = jiffies; + + return 0; +} + +static int ams_iaqcore_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct ams_iaqcore_data *data = iio_priv(indio_dev); + int ret; + + if (mask != IIO_CHAN_INFO_PROCESSED) + return -EINVAL; + + mutex_lock(&data->lock); + ret = ams_iaqcore_get_measurement(data); + + if (ret) + goto err_out; + + switch (chan->address) { + case AMS_IAQCORE_VOC_CO2_IDX: + *val = 0; + *val2 = be16_to_cpu(data->buffer.co2_ppm); + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case AMS_IAQCORE_VOC_RESISTANCE_IDX: + *val = be32_to_cpu(data->buffer.resistance); + ret = IIO_VAL_INT; + break; + case AMS_IAQCORE_VOC_TVOC_IDX: + *val = 0; + *val2 = be16_to_cpu(data->buffer.voc_ppb); + ret = IIO_VAL_INT_PLUS_NANO; + break; + default: + ret = -EINVAL; + } + +err_out: + mutex_unlock(&data->lock); + + return ret; +} + +static const struct iio_info ams_iaqcore_info = { + .read_raw = ams_iaqcore_read_raw, + .driver_module = THIS_MODULE, +}; + +static int ams_iaqcore_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct ams_iaqcore_data *data; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + /* so initial reading will complete */ + data->last_update = jiffies - HZ; + mutex_init(&data->lock); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &ams_iaqcore_info, + indio_dev->name = dev_name(&client->dev); + indio_dev->modes = INDIO_DIRECT_MODE; + + indio_dev->channels = ams_iaqcore_channels; + indio_dev->num_channels = ARRAY_SIZE(ams_iaqcore_channels); + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id ams_iaqcore_id[] = { + { "ams-iaq-core", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ams_iaqcore_id); + +static const struct of_device_id ams_iaqcore_dt_ids[] = { + { .compatible = "ams,iaq-core" }, + { } +}; +MODULE_DEVICE_TABLE(of, ams_iaqcore_dt_ids); + +static struct i2c_driver ams_iaqcore_driver = { + .driver = { + .name = "ams-iaq-core", + .of_match_table = of_match_ptr(ams_iaqcore_dt_ids), + }, + .probe = ams_iaqcore_probe, + .id_table = ams_iaqcore_id, +}; +module_i2c_driver(ams_iaqcore_driver); + +MODULE_AUTHOR("Matt Ranostay "); +MODULE_DESCRIPTION("AMS iAQ-Core VOC sensors"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 50672011d676aea5e521bc77dfce0c9eea040782 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Tue, 8 Dec 2015 18:26:21 +0800 Subject: Documentation: add the binding file for Freescale imx7d ADC driver The patch adds the binding file for Freescale imx7d ADC driver. Signed-off-by: Haibo Chen Acked-by: Rob Herring Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/iio/adc/imx7d-adc.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt new file mode 100644 index 000000000000..5c184b940669 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt @@ -0,0 +1,22 @@ +Freescale imx7d ADC bindings + +The devicetree bindings are for the ADC driver written for +imx7d SoC. + +Required properties: +- compatible: Should be "fsl,imx7d-adc" +- reg: Offset and length of the register set for the ADC device +- interrupts: The interrupt number for the ADC device +- clocks: The root clock of the ADC controller +- clock-names: Must contain "adc", matching entry in the clocks property +- vref-supply: The regulator supply ADC reference voltage + +Example: +adc1: adc@30610000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30610000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + clock-names = "adc"; + vref-supply = <®_vcc_3v3_mcu>; +}; -- cgit v1.2.3 From 456ad4a138d306ed0137e3330d5e2ff5937c1bf9 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Mon, 19 Oct 2015 14:31:49 +0200 Subject: serial: sh-sci: Add device tree bindings for r8a7793 Also replaces "R-Car M2" with "R-Car M2-W" to avoid confusion. Signed-off-by: Ulrich Hecht Acked-by: Simon Horman Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/serial/renesas,sci-serial.txt | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 73f825e5e644..ce2337806422 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -15,10 +15,14 @@ Required properties: - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART. - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART. - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART. - - "renesas,scif-r8a7791" for R8A7791 (R-Car M2) SCIF compatible UART. - - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2) SCIFA compatible UART. - - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2) SCIFB compatible UART. - - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2) HSCIF compatible UART. + - "renesas,scif-r8a7791" for R8A7791 (R-Car M2-W) SCIF compatible UART. + - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2-W) SCIFA compatible UART. + - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2-W) SCIFB compatible UART. + - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2-W) HSCIF compatible UART. + - "renesas,scif-r8a7793" for R8A7793 (R-Car M2-N) SCIF compatible UART. + - "renesas,scifa-r8a7793" for R8A7793 (R-Car M2-N) SCIFA compatible UART. + - "renesas,scifb-r8a7793" for R8A7793 (R-Car M2-N) SCIFB compatible UART. + - "renesas,hscif-r8a7793" for R8A7793 (R-Car M2-N) HSCIF compatible UART. - "renesas,scif-r8a7794" for R8A7794 (R-Car E2) SCIF compatible UART. - "renesas,scifa-r8a7794" for R8A7794 (R-Car E2) SCIFA compatible UART. - "renesas,scifb-r8a7794" for R8A7794 (R-Car E2) SCIFB compatible UART. -- cgit v1.2.3 From bd94c4077a0b2ecc35562c294f80f3659ecd8499 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 28 Oct 2015 12:46:05 +0900 Subject: serial: support 16-bit register interface for console Currently, 8-bit (MMIO) and 32-bit (MMIO32) register interfaces are supported for the 8250 console, but the 16-bit (MMIO16) is not. The 8250 UART device on my board is connected to a 16-bit bus and my main motivation is to use earlycon with it. (Refer to arch/arm/boot/dts/uniphier-support-card.dtsi) Signed-off-by: Masahiro Yamada Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 9 +++++---- drivers/tty/serial/8250/8250_core.c | 7 ++++--- drivers/tty/serial/8250/8250_early.c | 5 +++++ drivers/tty/serial/8250/8250_port.c | 20 ++++++++++++++++++++ drivers/tty/serial/earlycon.c | 15 +++++++++++---- drivers/tty/serial/of_serial.c | 3 +++ drivers/tty/serial/serial_core.c | 9 +++++++-- include/linux/serial_core.h | 1 + include/uapi/linux/serial.h | 1 + 9 files changed, 57 insertions(+), 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 742f69d18fc8..054e11d33b6b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -721,16 +721,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted. uart[8250],io,[,options] uart[8250],mmio,[,options] + uart[8250],mmio16,[,options] uart[8250],mmio32,[,options] uart[8250],0x[,options] Start an early, polled-mode console on the 8250/16550 UART at the specified I/O port or MMIO address, switching to the matching ttyS device later. MMIO inter-register address stride is either 8-bit - (mmio) or 32-bit (mmio32). - If none of [io|mmio|mmio32], is assumed to be - equivalent to 'mmio'. 'options' are specified in the - same format described for ttyS above; if unspecified, + (mmio), 16-bit (mmio16), or 32-bit (mmio32). + If none of [io|mmio|mmio16|mmio32], is assumed + to be equivalent to 'mmio'. 'options' are specified in + the same format described for ttyS above; if unspecified, the h/w is not re-initialized. hvc Use the hypervisor console device . This is for diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 39126460c1f5..c9720a97a977 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -620,7 +620,7 @@ static int univ8250_console_setup(struct console *co, char *options) * @options: ptr to option string from console command line * * Only attempts to match console command lines of the form: - * console=uart[8250],io|mmio|mmio32,[,] + * console=uart[8250],io|mmio|mmio16|mmio32,[,] * console=uart[8250],0x[,] * This form is used to register an initial earlycon boot console and * replace it with the serial8250_console at 8250 driver init. @@ -650,8 +650,9 @@ static int univ8250_console_match(struct console *co, char *name, int idx, if (port->iotype != iotype) continue; - if ((iotype == UPIO_MEM || iotype == UPIO_MEM32) && - (port->mapbase != addr)) + if ((iotype == UPIO_MEM || iotype == UPIO_MEM16 || + iotype == UPIO_MEM32 || iotype == UPIO_MEM32BE) + && (port->mapbase != addr)) continue; if (iotype == UPIO_PORT && port->iobase != addr) continue; diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index ca16195fb069..af62131af21e 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -42,6 +42,8 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse switch (port->iotype) { case UPIO_MEM: return readb(port->membase + offset); + case UPIO_MEM16: + return readw(port->membase + (offset << 1)); case UPIO_MEM32: return readl(port->membase + (offset << 2)); case UPIO_MEM32BE: @@ -59,6 +61,9 @@ static void __init serial8250_early_out(struct uart_port *port, int offset, int case UPIO_MEM: writeb(value, port->membase + offset); break; + case UPIO_MEM16: + writew(value, port->membase + (offset << 1)); + break; case UPIO_MEM32: writel(value, port->membase + (offset << 2)); break; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 52d82d2ac726..8d262bce97e4 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -368,6 +368,18 @@ static void mem_serial_out(struct uart_port *p, int offset, int value) writeb(value, p->membase + offset); } +static void mem16_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + writew(value, p->membase + offset); +} + +static unsigned int mem16_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return readw(p->membase + offset); +} + static void mem32_serial_out(struct uart_port *p, int offset, int value) { offset = offset << p->regshift; @@ -425,6 +437,11 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = mem_serial_out; break; + case UPIO_MEM16: + p->serial_in = mem16_serial_in; + p->serial_out = mem16_serial_out; + break; + case UPIO_MEM32: p->serial_in = mem32_serial_in; p->serial_out = mem32_serial_out; @@ -459,6 +476,7 @@ serial_port_out_sync(struct uart_port *p, int offset, int value) { switch (p->iotype) { case UPIO_MEM: + case UPIO_MEM16: case UPIO_MEM32: case UPIO_MEM32BE: case UPIO_AU: @@ -2462,6 +2480,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up) case UPIO_TSI: case UPIO_MEM32: case UPIO_MEM32BE: + case UPIO_MEM16: case UPIO_MEM: if (!port->mapbase) break; @@ -2499,6 +2518,7 @@ static void serial8250_release_std_resource(struct uart_8250_port *up) case UPIO_TSI: case UPIO_MEM32: case UPIO_MEM32BE: + case UPIO_MEM16: case UPIO_MEM: if (!port->mapbase) break; diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index f09636083426..07f7393210db 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -71,10 +71,16 @@ static int __init parse_options(struct earlycon_device *device, char *options) return -EINVAL; switch (port->iotype) { + case UPIO_MEM: + port->mapbase = addr; + break; + case UPIO_MEM16: + port->regshift = 1; + port->mapbase = addr; + break; case UPIO_MEM32: case UPIO_MEM32BE: - port->regshift = 2; /* fall-through */ - case UPIO_MEM: + port->regshift = 2; port->mapbase = addr; break; case UPIO_PORT: @@ -91,10 +97,11 @@ static int __init parse_options(struct earlycon_device *device, char *options) strlcpy(device->options, options, length); } - if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM32 || - port->iotype == UPIO_MEM32BE) + if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM16 || + port->iotype == UPIO_MEM32 || port->iotype == UPIO_MEM32BE) pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n", (port->iotype == UPIO_MEM) ? "" : + (port->iotype == UPIO_MEM16) ? "16" : (port->iotype == UPIO_MEM32) ? "32" : "32be", (unsigned long long)port->mapbase, device->options); diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index de5029649795..6d002eeb2516 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -122,6 +122,9 @@ static int of_platform_serial_setup(struct platform_device *ofdev, case 1: port->iotype = UPIO_MEM; break; + case 2: + port->iotype = UPIO_MEM16; + break; case 4: port->iotype = of_device_is_big_endian(np) ? UPIO_MEM32BE : UPIO_MEM32; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 22cfc3271744..b1f54ab1818c 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1818,8 +1818,8 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co) * @options: ptr for field; NULL if not present (out) * * Decodes earlycon kernel command line parameters of the form - * earlycon=,io|mmio|mmio32|mmio32be|mmio32native,, - * console=,io|mmio|mmio32|mmio32be|mmio32native,, + * earlycon=,io|mmio|mmio16|mmio32|mmio32be|mmio32native,, + * console=,io|mmio|mmio16|mmio32|mmio32be|mmio32native,, * * The optional form * earlycon=,0x, @@ -1834,6 +1834,9 @@ int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr, if (strncmp(p, "mmio,", 5) == 0) { *iotype = UPIO_MEM; p += 5; + } else if (strncmp(p, "mmio16,", 7) == 0) { + *iotype = UPIO_MEM16; + p += 7; } else if (strncmp(p, "mmio32,", 7) == 0) { *iotype = UPIO_MEM32; p += 7; @@ -2186,6 +2189,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) "I/O 0x%lx offset 0x%x", port->iobase, port->hub6); break; case UPIO_MEM: + case UPIO_MEM16: case UPIO_MEM32: case UPIO_MEM32BE: case UPIO_AU: @@ -2831,6 +2835,7 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2) return (port1->iobase == port2->iobase) && (port1->hub6 == port2->hub6); case UPIO_MEM: + case UPIO_MEM16: case UPIO_MEM32: case UPIO_MEM32BE: case UPIO_AU: diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 297d4fa1cfe5..35aa87b96b71 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -150,6 +150,7 @@ struct uart_port { #define UPIO_AU (SERIAL_IO_AU) /* Au1x00 and RT288x type IO */ #define UPIO_TSI (SERIAL_IO_TSI) /* Tsi108/109 type IO */ #define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */ +#define UPIO_MEM16 (SERIAL_IO_MEM16) /* 16b little endian */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h index 25331f9faa76..5d59c3ebf459 100644 --- a/include/uapi/linux/serial.h +++ b/include/uapi/linux/serial.h @@ -69,6 +69,7 @@ struct serial_struct { #define SERIAL_IO_AU 4 #define SERIAL_IO_TSI 5 #define SERIAL_IO_MEM32BE 6 +#define SERIAL_IO_MEM16 7 #define UART_CLEAR_FIFO 0x01 #define UART_USE_FIFO 0x02 -- cgit v1.2.3 From 99b809d7bdd17de7a68f1625a8973052c8311657 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Dec 2015 10:37:45 +0100 Subject: i2c: document generic DT bindings for timing parameters Also, sort the properties alphabetically and make indentation consistent. Wording largely taken from i2c-rk3x.txt, thanks guys! Only "i2c-scl-internal-delay-ns" is new, the rest is used by two drivers already and was documented in their driver binding documentation. Signed-off-by: Wolfram Sang Acked-by: Rob Herring Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c.txt | 31 ++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index 8a99150ac3a7..a00219f5ee07 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -29,12 +29,33 @@ Optional properties These properties may not be supported by all drivers. However, if a driver wants to support one of the below features, it should adapt the bindings below. -- clock-frequency - frequency of bus clock in Hz. -- wakeup-source - device can be used as a wakeup source. +- clock-frequency + frequency of bus clock in Hz. -- interrupts - interrupts used by the device. -- interrupt-names - "irq" and "wakeup" names are recognized by I2C core, - other names are left to individual drivers. +- i2c-scl-falling-time-ns + Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C + specification. + +- i2c-scl-internal-delay-ns + Number of nanoseconds the IP core additionally needs to setup SCL. + +- i2c-scl-rising-time-ns + Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C + specification. + +- i2c-sda-falling-time-ns + Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C + specification. + +- interrupts + interrupts used by the device. + +- interrupt-names + "irq" and "wakeup" names are recognized by I2C core, other names are + left to individual drivers. + +- wakeup-source + device can be used as a wakeup source. Binding may contain optional "interrupts" property, describing interrupts used by the device. I2C core will assign "irq" interrupt (or the very first -- cgit v1.2.3 From 24ad1648edcc8b1c4a68c406296e0b171753a981 Mon Sep 17 00:00:00 2001 From: Rashmica Gupta Date: Tue, 1 Dec 2015 14:51:38 +1100 Subject: powerpc/cell: Remove the Cell QPACE code All users of QPACE have upgraded to QPACE2 so remove the Cell QPACE code. Signed-off-by: Rashmica Gupta Acked-by: Arnd Bergmann Signed-off-by: Michael Ellerman --- Documentation/devicetree/bindings/serial/8250.txt | 1 - arch/powerpc/boot/Makefile | 2 - arch/powerpc/configs/ppc64_defconfig | 1 - arch/powerpc/platforms/cell/Kconfig | 5 - arch/powerpc/platforms/cell/Makefile | 4 - arch/powerpc/platforms/cell/qpace_setup.c | 148 ---------------------- 6 files changed, 161 deletions(-) delete mode 100644 arch/powerpc/platforms/cell/qpace_setup.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 91d5ab0e60fc..936ab5b87324 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -14,7 +14,6 @@ Required properties: tegra132, or tegra210. - "nxp,lpc3220-uart" - "ralink,rt2880-uart" - - "ibm,qpace-nwp-serial" - "altr,16550-FIFO32" - "altr,16550-FIFO64" - "altr,16550-FIFO128" diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 99e4487248ff..61165101342c 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -113,7 +113,6 @@ src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S -src-plat-$(CONFIG_PPC_CELL_QPACE) += pseries-head.S src-wlib := $(sort $(src-wlib-y)) src-plat := $(sort $(src-plat-y)) @@ -217,7 +216,6 @@ image-$(CONFIG_PPC_POWERNV) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.maple image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries image-$(CONFIG_PPC_PS3) += dtbImage.ps3 -image-$(CONFIG_PPC_CELL_QPACE) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 2c041b535a64..b041fb607376 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -36,7 +36,6 @@ CONFIG_PS3_ROM=m CONFIG_PS3_FLASH=m CONFIG_PS3_LPM=m CONFIG_PPC_IBM_CELL_BLADE=y -CONFIG_PPC_CELL_QPACE=y CONFIG_RTAS_FLASH=m CONFIG_IBMEBUS=y CONFIG_CPU_FREQ_PMAC64=y diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 429fc59d2a47..d9088f0b8fcc 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -33,11 +33,6 @@ config PPC_IBM_CELL_BLADE select PPC_UDBG_16550 select UDBG_RTAS_CONSOLE -config PPC_CELL_QPACE - bool "IBM Cell - QPACE" - depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN - select PPC_CELL_COMMON - config AXON_MSI bool depends on PPC_IBM_CELL_BLADE && PCI_MSI diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index 34699bddfddd..00464305763d 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON) += cbe_powerbutton.o ifeq ($(CONFIG_SMP),y) obj-$(CONFIG_PPC_CELL_NATIVE) += smp.o -obj-$(CONFIG_PPC_CELL_QPACE) += smp.o endif # needed only when building loadable spufs.ko @@ -26,6 +25,3 @@ obj-$(CONFIG_SPU_BASE) += spu_callbacks.o spu_base.o \ spufs/ obj-$(CONFIG_AXON_MSI) += axon_msi.o - -# qpace setup -obj-$(CONFIG_PPC_CELL_QPACE) += qpace_setup.o diff --git a/arch/powerpc/platforms/cell/qpace_setup.c b/arch/powerpc/platforms/cell/qpace_setup.c deleted file mode 100644 index d328140dc6f5..000000000000 --- a/arch/powerpc/platforms/cell/qpace_setup.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * linux/arch/powerpc/platforms/cell/qpace_setup.c - * - * Copyright (C) 1995 Linus Torvalds - * Adapted from 'alpha' version by Gary Thomas - * Modified by Cort Dougan (cort@cs.nmt.edu) - * Modified by PPC64 Team, IBM Corp - * Modified by Cell Team, IBM Deutschland Entwicklung GmbH - * Modified by Benjamin Krill , IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "interrupt.h" -#include "pervasive.h" -#include "ras.h" - -static void qpace_show_cpuinfo(struct seq_file *m) -{ - struct device_node *root; - const char *model = ""; - - root = of_find_node_by_path("/"); - if (root) - model = of_get_property(root, "model", NULL); - seq_printf(m, "machine\t\t: CHRP %s\n", model); - of_node_put(root); -} - -static void qpace_progress(char *s, unsigned short hex) -{ - printk("*** %04x : %s\n", hex, s ? s : ""); -} - -static const struct of_device_id qpace_bus_ids[] __initconst = { - { .type = "soc", }, - { .compatible = "soc", }, - { .type = "spider", }, - { .type = "axon", }, - { .type = "plb5", }, - { .type = "plb4", }, - { .type = "opb", }, - { .type = "ebc", }, - {}, -}; - -static int __init qpace_publish_devices(void) -{ - int node; - - /* Publish OF platform devices for southbridge IOs */ - of_platform_bus_probe(NULL, qpace_bus_ids, NULL); - - /* There is no device for the MIC memory controller, thus we create - * a platform device for it to attach the EDAC driver to. - */ - for_each_online_node(node) { - if (cbe_get_cpu_mic_tm_regs(cbe_node_to_cpu(node)) == NULL) - continue; - platform_device_register_simple("cbe-mic", node, NULL, 0); - } - - return 0; -} -machine_subsys_initcall(qpace, qpace_publish_devices); - -static void __init qpace_setup_arch(void) -{ -#ifdef CONFIG_SPU_BASE - spu_priv1_ops = &spu_priv1_mmio_ops; - spu_management_ops = &spu_management_of_ops; -#endif - - cbe_regs_init(); - -#ifdef CONFIG_CBE_RAS - cbe_ras_init(); -#endif - -#ifdef CONFIG_SMP - smp_init_cell(); -#endif - - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000; - - cbe_pervasive_init(); -#ifdef CONFIG_DUMMY_CONSOLE - conswitchp = &dummy_con; -#endif -} - -static int __init qpace_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "IBM,QPACE")) - return 0; - - hpte_init_native(); - pm_power_off = rtas_power_off; - - return 1; -} - -define_machine(qpace) { - .name = "QPACE", - .probe = qpace_probe, - .setup_arch = qpace_setup_arch, - .show_cpuinfo = qpace_show_cpuinfo, - .restart = rtas_restart, - .halt = rtas_halt, - .get_boot_time = rtas_get_boot_time, - .get_rtc_time = rtas_get_rtc_time, - .set_rtc_time = rtas_set_rtc_time, - .calibrate_decr = generic_calibrate_decr, - .progress = qpace_progress, - .init_IRQ = iic_init_IRQ, -}; -- cgit v1.2.3 From ca68eade666a6ad7e954cc8c1af07ce477726087 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Dec 2015 10:37:49 +0100 Subject: i2c: rcar: honor additional i2c timings from DT Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c-rcar.txt | 4 ++++ drivers/i2c/busses/i2c-rcar.c | 21 ++++++++++++--------- 2 files changed, 16 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt index ea406eb20fa5..95e97223a71c 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt @@ -20,6 +20,10 @@ Optional properties: propoerty indicates the default frequency 100 kHz. - clocks: clock specifier. +- i2c-scl-falling-time-ns: see i2c.txt +- i2c-scl-internal-delay-ns: see i2c.txt +- i2c-scl-rising-time-ns: see i2c.txt + Examples : i2c0: i2c@e6508000 { diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index c663f4389bf8..b2389c492579 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -164,12 +164,15 @@ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timings *t) { - u32 scgd, cdf, round, ick, scl, cdf_width; + u32 scgd, cdf, round, ick, sum, scl, cdf_width; unsigned long rate; struct device *dev = rcar_i2c_priv_to_dev(priv); /* Fall back to previously used values if not supplied */ t->bus_freq_hz = t->bus_freq_hz ?: 100000; + t->scl_fall_ns = t->scl_fall_ns ?: 35; + t->scl_rise_ns = t->scl_rise_ns ?: 200; + t->scl_int_delay_ns = t->scl_int_delay_ns ?: 50; switch (priv->devtype) { case I2C_RCAR_GEN1: @@ -193,9 +196,9 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timin * SCL = ick / (20 + SCGD * 8 + F[(ticf + tr + intd) * ick]) * * ick : I2C internal clock < 20 MHz - * ticf : I2C SCL falling time = 35 ns here - * tr : I2C SCL rising time = 200 ns here - * intd : LSI internal delay = 50 ns here + * ticf : I2C SCL falling time + * tr : I2C SCL rising time + * intd : LSI internal delay * clkp : peripheral_clk * F[] : integer up-valuation */ @@ -211,12 +214,12 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timin * it is impossible to calculate large scale * number on u32. separate it * - * F[(ticf + tr + intd) * ick] - * = F[(35 + 200 + 50)ns * ick] - * = F[285 * ick / 1000000000] - * = F[(ick / 1000000) * 285 / 1000] + * F[(ticf + tr + intd) * ick] with sum = (ticf + tr + intd) + * = F[sum * ick / 1000000000] + * = F[(ick / 1000000) * sum / 1000] */ - round = (ick + 500000) / 1000000 * 285; + sum = t->scl_fall_ns + t->scl_rise_ns + t->scl_int_delay_ns; + round = (ick + 500000) / 1000000 * sum; round = (round + 500) / 1000; /* -- cgit v1.2.3 From cb0eac8fd1a3180ce260a8dca01584bc5495a8e8 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 14 Dec 2015 10:37:12 +0000 Subject: extcon: arizona: Update device tree binding for mic detect configurations Update the device tree binding documentation to include documentation for the wlf,micd-configs property that is used to specify the configurations for headset polarity detection (CTIA / OTMP). Signed-off-by: Charles Keepax Acked-by: Rob Herring Signed-off-by: Chanwoo Choi --- Documentation/devicetree/bindings/extcon/extcon-arizona.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt index 238e10e86a20..fd9b898d2d7d 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt @@ -37,5 +37,13 @@ Optional properties: milliseconds. - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone detection. + - wlf,micd-configs : Headset polarity configurations (generally used for + detection of CTIA / OMTP headsets), the field can be of variable length + but should always be a multiple of 3 cells long, each three cell group + represents one polarity configuration. + The first cell defines the accessory detection pin, zero will use MICDET1 + and all other values will use MICDET2. + The second cell represents the MICBIAS to be used. + The third cell represents the value of the micd-pol-gpio pin. - wlf,gpsw : Settings for the general purpose switch -- cgit v1.2.3 From 36e2693b68562d4b984b841c041ffa76370e9b7f Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 14 Dec 2015 10:37:13 +0000 Subject: extcon: arizona: Add DT binding examples Add an example for all elements of the Arizona extcon device tree binding. Signed-off-by: Charles Keepax Signed-off-by: Chanwoo Choi --- .../devicetree/bindings/extcon/extcon-arizona.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt index fd9b898d2d7d..e27341f8a4c7 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt @@ -47,3 +47,29 @@ Optional properties: The third cell represents the value of the micd-pol-gpio pin. - wlf,gpsw : Settings for the general purpose switch + +Example: + +codec: wm8280@0 { + compatible = "wlf,wm8280"; + reg = <0>; + ... + + wlf,use-jd2; + wlf,use-jd2-nopull; + wlf,jd-invert; + + wlf,micd-software-compare; + wlf,micd-detect-debounce = <0>; + wlf,micd-pol-gpio = <&codec 2 0>; + wlf,micd-rate = ; + wlf,micd-dbtime = <4>; + wlf,micd-timeout-ms = <100>; + wlf,micd-force-micbias; + wlf,micd-configs = < + 0 1 0 /* MICDET1 MICBIAS1 GPIO=low */ + 1 2 1 /* MICDET2 MICBIAS2 GPIO=high */ + >; + + wlf,gpsw = <0>; +}; -- cgit v1.2.3 From f8764406a8a9a6443048f9c5c8e512504684ed1a Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Bhatta Date: Wed, 18 Nov 2015 18:20:31 +0530 Subject: usb: doc: dwc3-xilinx: Add devicetree bindings This patch adds binding doc for Xilinx DWC3 glue driver. Acked-by: Rob Herring Signed-off-by: Subbaraya Sundeep Bhatta Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/dwc3-xilinx.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/dwc3-xilinx.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt new file mode 100644 index 000000000000..30361b32a460 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt @@ -0,0 +1,33 @@ +Xilinx SuperSpeed DWC3 USB SoC controller + +Required properties: +- compatible: Should contain "xlnx,zynqmp-dwc3" +- clocks: A list of phandles for the clocks listed in clock-names +- clock-names: Should contain the following: + "bus_clk" Master/Core clock, have to be >= 125 MHz for SS + operation and >= 60MHz for HS operation + + "ref_clk" Clock source to core during PHY power down + +Required child node: +A child node must exist to represent the core DWC3 IP block. The name of +the node is not important. The content of the node is defined in dwc3.txt. + +Example device node: + + usb@0 { + #address-cells = <0x2>; + #size-cells = <0x1>; + status = "okay"; + compatible = "xlnx,zynqmp-dwc3"; + clock-names = "bus_clk" "ref_clk"; + clocks = <&clk125>, <&clk125>; + ranges; + + dwc3@fe200000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe200000 0x40000>; + interrupts = <0x0 0x41 0x4>; + dr_mode = "host"; + }; + }; -- cgit v1.2.3 From df001894e3bfe02d06b83924623dd88babfe5dbd Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 19 Nov 2015 15:02:17 +0800 Subject: Documentation: usb: gadget-testing: add description for depth of queue Add both bulk and iso depth of queue for sourcesink. Reviewed-by: Krzysztof Opasiak Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- Documentation/usb/gadget-testing.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt index b24d3ef89166..84b3d1036501 100644 --- a/Documentation/usb/gadget-testing.txt +++ b/Documentation/usb/gadget-testing.txt @@ -579,6 +579,8 @@ The SOURCESINK function provides these attributes in its function directory: isoc_mult - 0..2 (hs/ss only) isoc_maxburst - 0..15 (ss only) bulk_buflen - buffer length + bulk_qlen - depth of queue for bulk + iso_qlen - depth of queue for iso Testing the SOURCESINK function ------------------------------- -- cgit v1.2.3 From 4405a2ced55f375708669550cda750452885c9de Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 13 Nov 2015 16:00:27 +0800 Subject: Doc: ABI: configfs-usb-gadget-sourcesink: add two entries for depth of queue Add both bulk and iso depth of queue entries. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- Documentation/ABI/testing/configfs-usb-gadget-sourcesink | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink index bc7ff731aa0c..f56335af2d88 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink +++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink @@ -10,3 +10,5 @@ Description: isoc_mult - 0..2 (hs/ss only) isoc_maxburst - 0..15 (ss only) buflen - buffer length + bulk_qlen - depth of queue for bulk + iso_qlen - depth of queue for iso -- cgit v1.2.3 From 37dd9d65cc41fcc7e77645a1cdf2659472809b96 Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Wed, 18 Nov 2015 15:39:47 +0800 Subject: usb: dwc2: add support of hi6220 Support hisilicon,hi6220-usb for HiKey board Acked-by: Rob Herring Acked-by: John Youn Signed-off-by: Zhangfei Gao Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/dwc2.txt | 1 + drivers/usb/dwc2/platform.c | 33 ++++++++++++++++++++++++++ 2 files changed, 34 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index fd132cbee70e..221368207ca4 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -4,6 +4,7 @@ Platform DesignWare HS OTG USB 2.0 controller Required properties: - compatible : One of: - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. + - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC. - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 095bc05f76ca..5df2adf6f4e7 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -54,6 +54,38 @@ static const char dwc2_driver_name[] = "dwc2"; +static const struct dwc2_core_params params_hi6220 = { + .otg_cap = 2, /* No HNP/SRP capable */ + .otg_ver = 0, /* 1.3 */ + .dma_enable = 1, + .dma_desc_enable = 0, + .dma_desc_fs_enable = 0, + .speed = 0, /* High Speed */ + .enable_dynamic_fifo = 1, + .en_multiple_tx_fifo = 1, + .host_rx_fifo_size = 512, + .host_nperio_tx_fifo_size = 512, + .host_perio_tx_fifo_size = 512, + .max_transfer_size = 65535, + .max_packet_count = 511, + .host_channels = 16, + .phy_type = 1, /* UTMI */ + .phy_utmi_width = 8, + .phy_ulpi_ddr = 0, /* Single */ + .phy_ulpi_ext_vbus = 0, + .i2c_enable = 0, + .ulpi_fs_ls = 0, + .host_support_fs_ls_low_power = 0, + .host_ls_low_power_phy_clk = 0, /* 48 MHz */ + .ts_dline = 0, + .reload_ctl = 0, + .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << + GAHBCFG_HBSTLEN_SHIFT, + .uframe_sched = 0, + .external_id_pin_ctl = -1, + .hibernation = -1, +}; + static const struct dwc2_core_params params_bcm2835 = { .otg_cap = 0, /* HNP/SRP capable */ .otg_ver = 0, /* 1.3 */ @@ -310,6 +342,7 @@ static int dwc2_driver_remove(struct platform_device *dev) static const struct of_device_id dwc2_of_match_table[] = { { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, + { .compatible = "hisilicon,hi6220-usb", .data = ¶ms_hi6220 }, { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, { .compatible = "snps,dwc2", .data = NULL }, { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, -- cgit v1.2.3 From 7a400585893e7aa52a845027bce1bf529bdf65d1 Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Mon, 14 Dec 2015 23:30:43 -0600 Subject: soc: qcom: documentation: Update SMD/RPM Docs This patch moves the qcom,smd-rpm.txt to the correct location and splits out the smd and rpm documentation. In addition, a smd-rpm-regulator document is added. Signed-off-by: Andy Gross Acked-by: Bjorn Andersson Signed-off-by: Mark Brown --- .../bindings/regulator/qcom,smd-rpm-regulator.txt | 106 +++++++++++++++++++ .../devicetree/bindings/soc/qcom,smd-rpm.txt | 117 --------------------- .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 58 ++++++++++ 3 files changed, 164 insertions(+), 117 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt delete mode 100644 Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt new file mode 100644 index 000000000000..bda2ed96ba66 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt @@ -0,0 +1,106 @@ +QCOM SMD RPM REGULATOR + +The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM. +Because SMD is used as the communication transport mechanism, the RPM resides as +a subnode of the SMD. As such, the SMD-RPM regulator requires that the SMD and +RPM nodes be present. + +Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for +information pertaining to the SMD node. + +Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt for +information regarding the RPM node. + +== Regulator + +Regulator nodes are identified by their compatible: + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,rpm-pm8841-regulators" + "qcom,rpm-pm8941-regulators" + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: + Usage: optional (pm8841 only) + Value type: + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_l1_l3-supply: +- vdd_l2_lvs1_2_3-supply: +- vdd_l4_l11-supply: +- vdd_l5_l7-supply: +- vdd_l6_l12_l14_l15-supply: +- vdd_l8_l16_l18_l19-supply: +- vdd_l9_l10_l17_l22-supply: +- vdd_l13_l20_l23_l24-supply: +- vdd_l21-supply: +- vin_5vs-supply: + Usage: optional (pm8941 only) + Value type: + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +The regulator node houses sub-nodes for each regulator within the device. Each +sub-node is identified using the node's name, with valid values listed for each +of the pmics below. + +pm8841: + s1, s2, s3, s4, s5, s6, s7, s8 + +pm8941: + s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, + l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, + lvs3, 5vs1, 5vs2 + +The content of each sub-node is defined by the standard binding for regulators - +see regulator.txt. + += EXAMPLE + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <0 168 1>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + vdd_l13_l20_l23_l24-supply = <&pm8941_boost>; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_boost: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt deleted file mode 100644 index e27f5c4c54fd..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt +++ /dev/null @@ -1,117 +0,0 @@ -Qualcomm Resource Power Manager (RPM) over SMD - -This driver is used to interface with the Resource Power Manager (RPM) found in -various Qualcomm platforms. The RPM allows each component in the system to vote -for state of the system resources, such as clocks, regulators and bus -frequencies. - -- compatible: - Usage: required - Value type: - Definition: must be one of: - "qcom,rpm-msm8974" - -- qcom,smd-channels: - Usage: required - Value type: - Definition: Shared Memory channel used for communication with the RPM - -= SUBDEVICES - -The RPM exposes resources to its subnodes. The below bindings specify the set -of valid subnodes that can operate on these resources. - -== Regulators - -Regulator nodes are identified by their compatible: - -- compatible: - Usage: required - Value type: - Definition: must be one of: - "qcom,rpm-pm8841-regulators" - "qcom,rpm-pm8941-regulators" - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: - Usage: optional (pm8841 only) - Value type: - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_l1_l3-supply: -- vdd_l2_lvs1_2_3-supply: -- vdd_l4_l11-supply: -- vdd_l5_l7-supply: -- vdd_l6_l12_l14_l15-supply: -- vdd_l8_l16_l18_l19-supply: -- vdd_l9_l10_l17_l22-supply: -- vdd_l13_l20_l23_l24-supply: -- vdd_l21-supply: -- vin_5vs-supply: - Usage: optional (pm8941 only) - Value type: - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -The regulator node houses sub-nodes for each regulator within the device. Each -sub-node is identified using the node's name, with valid values listed for each -of the pmics below. - -pm8841: - s1, s2, s3, s4, s5, s6, s7, s8 - -pm8941: - s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, - l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, - lvs3, 5vs1, 5vs2 - -The content of each sub-node is defined by the standard binding for regulators - -see regulator.txt. - -= EXAMPLE - - smd { - compatible = "qcom,smd"; - - rpm { - interrupts = <0 168 1>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; - - pm8941-regulators { - compatible = "qcom,rpm-pm8941-regulators"; - vdd_l13_l20_l23_l24-supply = <&pm8941_boost>; - - pm8941_s3: s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8941_boost: s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - pm8941_l20: l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - }; - }; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt new file mode 100644 index 000000000000..a48049ccf6d0 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt @@ -0,0 +1,58 @@ +Qualcomm Resource Power Manager (RPM) over SMD + +This driver is used to interface with the Resource Power Manager (RPM) found in +various Qualcomm platforms. The RPM allows each component in the system to vote +for state of the system resources, such as clocks, regulators and bus +frequencies. + +The SMD information for the RPM edge should be filled out. See qcom,smd.txt for +the required edge properties. All SMD related properties will reside within the +RPM node itself. + += SUBDEVICES + +The RPM exposes resources to its subnodes. The rpm_requests node must be +present and this subnode may contain children that designate regulator +resources. + +- compatible: + Usage: required + Value type: + Definition: must be one of: + "qcom,rpm-apq8084" + "qcom,rpm-msm8916" + "qcom,rpm-msm8974" + +- qcom,smd-channels: + Usage: required + Value type: + Definition: must be "rpm_requests" + +Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt +for information on the regulator subnodes that can exist under the rpm_requests. + +Example: + + soc { + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <0 168 1>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + ... + }; + }; + }; -- cgit v1.2.3 From 57d6567680edf9075d14b7fad9473e9c4a4b337e Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Mon, 14 Dec 2015 23:30:44 -0600 Subject: regulator: qcom-smd: Add PM8916 support This patch adds support and documentation for the PM8916 regulators found on MSM8916 platforms. Acked-by: Bjorn Andersson Signed-off-by: Andy Gross Signed-off-by: Mark Brown --- .../bindings/regulator/qcom,smd-rpm-regulator.txt | 18 ++++++ drivers/regulator/qcom_smd-regulator.c | 64 ++++++++++++++++++++++ 2 files changed, 82 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt index bda2ed96ba66..82557e174258 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt @@ -20,6 +20,7 @@ Regulator nodes are identified by their compatible: Value type: Definition: must be one of: "qcom,rpm-pm8841-regulators" + "qcom,rpm-pm8916-regulators" "qcom,rpm-pm8941-regulators" - vdd_s1-supply: @@ -35,6 +36,19 @@ Regulator nodes are identified by their compatible: Definition: reference to regulator supplying the input pin, as described in the data sheet +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_l1_l2_l3-supply: +- vdd_l4_l5_l6-supply: +- vdd_l7-supply: +- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply: + Usage: optional (pm8916 only) + Value type: + Definition: reference to regulator supplying the input pin, as + described in the data sheet + - vdd_s1-supply: - vdd_s2-supply: - vdd_s3-supply: @@ -60,6 +74,10 @@ of the pmics below. pm8841: s1, s2, s3, s4, s5, s6, s7, s8 +pm8916: + s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, + l14, l15, l16, l17, l18 + pm8941: s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 6fa0c7d13290..8464eadf2c85 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -211,6 +211,43 @@ static const struct regulator_desc pm8941_switch = { .ops = &rpm_switch_ops, }; +static const struct regulator_desc pm8916_pldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500), + }, + .n_linear_ranges = 1, + .n_voltages = 209, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm8916_nldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(375000, 0, 93, 12500), + }, + .n_linear_ranges = 1, + .n_voltages = 94, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm8916_buck_lvo_smps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), + REGULATOR_LINEAR_RANGE(750000, 96, 127, 25000), + }, + .n_linear_ranges = 2, + .n_voltages = 128, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm8916_buck_hvo_smps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(1550000, 0, 31, 25000), + }, + .n_linear_ranges = 1, + .n_voltages = 32, + .ops = &rpm_smps_ldo_ops, +}; + struct rpm_regulator_data { const char *name; u32 type; @@ -231,6 +268,32 @@ static const struct rpm_regulator_data rpm_pm8841_regulators[] = { {} }; +static const struct rpm_regulator_data rpm_pm8916_regulators[] = { + { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8916_buck_lvo_smps, "vdd_s1" }, + { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8916_buck_lvo_smps, "vdd_s2" }, + { "s3", QCOM_SMD_RPM_SMPA, 3, &pm8916_buck_lvo_smps, "vdd_s3" }, + { "s4", QCOM_SMD_RPM_SMPA, 4, &pm8916_buck_hvo_smps, "vdd_s4" }, + { "l1", QCOM_SMD_RPM_LDOA, 1, &pm8916_nldo, "vdd_l1_l2_l3" }, + { "l2", QCOM_SMD_RPM_LDOA, 2, &pm8916_nldo, "vdd_l1_l2_l3" }, + { "l3", QCOM_SMD_RPM_LDOA, 3, &pm8916_nldo, "vdd_l1_l2_l3" }, + { "l4", QCOM_SMD_RPM_LDOA, 4, &pm8916_pldo, "vdd_l4_l5_l6" }, + { "l5", QCOM_SMD_RPM_LDOA, 5, &pm8916_pldo, "vdd_l4_l5_l6" }, + { "l6", QCOM_SMD_RPM_LDOA, 6, &pm8916_pldo, "vdd_l4_l5_l6" }, + { "l7", QCOM_SMD_RPM_LDOA, 7, &pm8916_pldo, "vdd_l7" }, + { "l8", QCOM_SMD_RPM_LDOA, 8, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" }, + { "l9", QCOM_SMD_RPM_LDOA, 9, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" }, + { "l10", QCOM_SMD_RPM_LDOA, 10, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l11", QCOM_SMD_RPM_LDOA, 11, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l12", QCOM_SMD_RPM_LDOA, 12, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l13", QCOM_SMD_RPM_LDOA, 13, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l14", QCOM_SMD_RPM_LDOA, 14, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l15", QCOM_SMD_RPM_LDOA, 15, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l16", QCOM_SMD_RPM_LDOA, 16, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l17", QCOM_SMD_RPM_LDOA, 17, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l18", QCOM_SMD_RPM_LDOA, 18, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + {} +}; + static const struct rpm_regulator_data rpm_pm8941_regulators[] = { { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8x41_hfsmps, "vdd_s1" }, { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8x41_hfsmps, "vdd_s2" }, @@ -274,6 +337,7 @@ static const struct rpm_regulator_data rpm_pm8941_regulators[] = { static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators }, + { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators }, { .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators }, {} }; -- cgit v1.2.3 From ee01d0c91ef1c198fd7819c2eb166580e41dc2ea Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Mon, 14 Dec 2015 23:30:45 -0600 Subject: regulator: qcom-smd: Add support for PMA8084 This patch adds support and documentation for the PMA8084 regulators found on APQ8084 platforms. Signed-off-by: Andy Gross Acked-by: Bjorn Andersson Signed-off-by: Mark Brown --- .../bindings/regulator/qcom,smd-rpm-regulator.txt | 35 ++++++++ drivers/regulator/qcom_smd-regulator.c | 95 ++++++++++++++++++++++ 2 files changed, 130 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt index 82557e174258..1f8d6f84b657 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt @@ -22,6 +22,7 @@ Regulator nodes are identified by their compatible: "qcom,rpm-pm8841-regulators" "qcom,rpm-pm8916-regulators" "qcom,rpm-pm8941-regulators" + "qcom,rpm-pma8084-regulators" - vdd_s1-supply: - vdd_s2-supply: @@ -67,6 +68,35 @@ Regulator nodes are identified by their compatible: Definition: reference to regulator supplying the input pin, as described in the data sheet +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: +- vdd_s9-supply: +- vdd_s10-supply: +- vdd_s11-supply: +- vdd_s12-supply: +- vdd_l1_l11-supply: +- vdd_l2_l3_l4_l27-supply: +- vdd_l5_l7-supply: +- vdd_l6_l12_l14_l15_l26-supply: +- vdd_l8-supply: +- vdd_l9_l10_l13_l20_l23_l24-supply: +- vdd_l16_l25-supply: +- vdd_l17-supply: +- vdd_l18-supply: +- vdd_l19-supply: +- vdd_l21-supply: +- vdd_l22-supply: + Usage: optional (pma8084 only) + Value type: + Definition: reference to regulator supplying the input pin, as + described in the data sheet + The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each of the pmics below. @@ -83,6 +113,11 @@ pm8941: l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3, 5vs1, 5vs2 +pma8084: + s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, + l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, + l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt. diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 8464eadf2c85..56a17ec5b5ef 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -153,6 +153,49 @@ static const struct regulator_ops rpm_switch_ops = { .is_enabled = rpm_reg_is_enabled, }; +static const struct regulator_desc pma8084_hfsmps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), + REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000), + }, + .n_linear_ranges = 2, + .n_voltages = 159, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pma8084_ftsmps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000), + REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000), + }, + .n_linear_ranges = 2, + .n_voltages = 340, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pma8084_pldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(750000, 0, 30, 25000), + REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000), + }, + .n_linear_ranges = 2, + .n_voltages = 100, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pma8084_nldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500), + }, + .n_linear_ranges = 1, + .n_voltages = 64, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pma8084_switch = { + .ops = &rpm_switch_ops, +}; + static const struct regulator_desc pm8x41_hfsmps = { .linear_ranges = (struct regulator_linear_range[]) { REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500), @@ -335,10 +378,62 @@ static const struct rpm_regulator_data rpm_pm8941_regulators[] = { {} }; +static const struct rpm_regulator_data rpm_pma8084_regulators[] = { + { "s1", QCOM_SMD_RPM_SMPA, 1, &pma8084_ftsmps, "vdd_s1" }, + { "s2", QCOM_SMD_RPM_SMPA, 2, &pma8084_ftsmps, "vdd_s2" }, + { "s3", QCOM_SMD_RPM_SMPA, 3, &pma8084_hfsmps, "vdd_s3" }, + { "s4", QCOM_SMD_RPM_SMPA, 4, &pma8084_hfsmps, "vdd_s4" }, + { "s5", QCOM_SMD_RPM_SMPA, 5, &pma8084_hfsmps, "vdd_s5" }, + { "s6", QCOM_SMD_RPM_SMPA, 6, &pma8084_ftsmps, "vdd_s6" }, + { "s7", QCOM_SMD_RPM_SMPA, 7, &pma8084_ftsmps, "vdd_s7" }, + { "s8", QCOM_SMD_RPM_SMPA, 8, &pma8084_ftsmps, "vdd_s8" }, + { "s9", QCOM_SMD_RPM_SMPA, 9, &pma8084_ftsmps, "vdd_s9" }, + { "s10", QCOM_SMD_RPM_SMPA, 10, &pma8084_ftsmps, "vdd_s10" }, + { "s11", QCOM_SMD_RPM_SMPA, 11, &pma8084_ftsmps, "vdd_s11" }, + { "s12", QCOM_SMD_RPM_SMPA, 12, &pma8084_ftsmps, "vdd_s12" }, + + { "l1", QCOM_SMD_RPM_LDOA, 1, &pma8084_nldo, "vdd_l1_l11" }, + { "l2", QCOM_SMD_RPM_LDOA, 2, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + { "l3", QCOM_SMD_RPM_LDOA, 3, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + { "l4", QCOM_SMD_RPM_LDOA, 4, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + { "l5", QCOM_SMD_RPM_LDOA, 5, &pma8084_pldo, "vdd_l5_l7" }, + { "l6", QCOM_SMD_RPM_LDOA, 6, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l7", QCOM_SMD_RPM_LDOA, 7, &pma8084_pldo, "vdd_l5_l7" }, + { "l8", QCOM_SMD_RPM_LDOA, 8, &pma8084_pldo, "vdd_l8" }, + { "l9", QCOM_SMD_RPM_LDOA, 9, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l10", QCOM_SMD_RPM_LDOA, 10, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l11", QCOM_SMD_RPM_LDOA, 11, &pma8084_nldo, "vdd_l1_l11" }, + { "l12", QCOM_SMD_RPM_LDOA, 12, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l13", QCOM_SMD_RPM_LDOA, 13, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l14", QCOM_SMD_RPM_LDOA, 14, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l15", QCOM_SMD_RPM_LDOA, 15, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l16", QCOM_SMD_RPM_LDOA, 16, &pma8084_pldo, "vdd_l16_l25" }, + { "l17", QCOM_SMD_RPM_LDOA, 17, &pma8084_pldo, "vdd_l17" }, + { "l18", QCOM_SMD_RPM_LDOA, 18, &pma8084_pldo, "vdd_l18" }, + { "l19", QCOM_SMD_RPM_LDOA, 19, &pma8084_pldo, "vdd_l19" }, + { "l20", QCOM_SMD_RPM_LDOA, 20, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l21", QCOM_SMD_RPM_LDOA, 21, &pma8084_pldo, "vdd_l21" }, + { "l22", QCOM_SMD_RPM_LDOA, 22, &pma8084_pldo, "vdd_l22" }, + { "l23", QCOM_SMD_RPM_LDOA, 23, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l24", QCOM_SMD_RPM_LDOA, 24, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l25", QCOM_SMD_RPM_LDOA, 25, &pma8084_pldo, "vdd_l16_l25" }, + { "l26", QCOM_SMD_RPM_LDOA, 26, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l27", QCOM_SMD_RPM_LDOA, 27, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + + { "lvs1", QCOM_SMD_RPM_VSA, 1, &pma8084_switch }, + { "lvs2", QCOM_SMD_RPM_VSA, 2, &pma8084_switch }, + { "lvs3", QCOM_SMD_RPM_VSA, 3, &pma8084_switch }, + { "lvs4", QCOM_SMD_RPM_VSA, 4, &pma8084_switch }, + { "5vs1", QCOM_SMD_RPM_VSA, 5, &pma8084_switch }, + + {} +}; + static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators }, { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators }, { .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators }, + { .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators }, {} }; MODULE_DEVICE_TABLE(of, rpm_of_match); -- cgit v1.2.3 From f310abb33bf1e2e93f2b8d788b47100f07f1cf09 Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Fri, 11 Dec 2015 12:24:40 +0100 Subject: Documentation: usb: update usb-tools repository address It seems that gitorious repository is no longer accessible, so we replace it with address to active repository. Signed-off-by: Robert Baldyga Signed-off-by: Felipe Balbi --- Documentation/usb/gadget-testing.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt index 84b3d1036501..581960574889 100644 --- a/Documentation/usb/gadget-testing.txt +++ b/Documentation/usb/gadget-testing.txt @@ -434,7 +434,7 @@ On host: serialc -v -p -i -a1 -s1024 \ where seriald and serialc are Felipe's utilities found here: -https://git.gitorious.org/usb/usb-tools.git master +https://github.com/felipebalbi/usb-tools.git master 12. PHONET function =================== -- cgit v1.2.3 From 89d75bf18d0e3e9a02961f537c87d7991df3bd32 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 16 Dec 2015 13:51:50 +0900 Subject: usb: renesas_usbhs: add SoC names to compatibility string documentation This extends the documentation of compatibility strings a little to include the SoC names. Signed-off-by: Simon Horman Acked-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index 7d48f63db44e..a14c0bb561d5 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -2,10 +2,10 @@ Renesas Electronics USBHS driver Required properties: - compatible: Must contain one of the following: - - "renesas,usbhs-r8a7790" - - "renesas,usbhs-r8a7791" - - "renesas,usbhs-r8a7794" - - "renesas,usbhs-r8a7795" + - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device + - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device + - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device + - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device - reg: Base address and length of the register for the USBHS - interrupts: Interrupt specifier for the USBHS - clocks: A list of phandle + clock specifier pairs -- cgit v1.2.3 From 2f1a993a0da652c50e08159f16590b7f9820d192 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 16 Dec 2015 13:51:51 +0900 Subject: usb: renesas_usbhs: add fallback compatibility strings Add fallback compatibility strings for R-Car Gen2 and Gen3. This is in keeping with the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Simon Horman Acked-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 12 ++++++++++-- drivers/usb/renesas_usbhs/common.c | 9 +++++++++ 2 files changed, 19 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index a14c0bb561d5..45d9ae13ffa3 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -1,11 +1,19 @@ Renesas Electronics USBHS driver Required properties: - - compatible: Must contain one of the following: + - compatible: Must contain one or more of the following: + - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device + - "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device + - "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first followed + by the generic version. + - reg: Base address and length of the register for the USBHS - interrupts: Interrupt specifier for the USBHS - clocks: A list of phandle + clock specifier pairs @@ -22,7 +30,7 @@ Optional properties: Example: usbhs: usb@e6590000 { - compatible = "renesas,usbhs-r8a7790"; + compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; reg = <0 0xe6590000 0 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 7ccc2fe4f6ec..5af9ca5d54ab 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -481,6 +481,15 @@ static const struct of_device_id usbhs_of_match[] = { .compatible = "renesas,usbhs-r8a7795", .data = (void *)USBHS_TYPE_RCAR_GEN2, }, + { + .compatible = "renesas,rcar-gen2-usbhs", + .data = (void *)USBHS_TYPE_RCAR_GEN2, + }, + { + /* Gen3 is compatible with Gen2 */ + .compatible = "renesas,rcar-gen3-usbhs", + .data = (void *)USBHS_TYPE_RCAR_GEN2, + }, { }, }; MODULE_DEVICE_TABLE(of, usbhs_of_match); -- cgit v1.2.3 From d0450272a6b9c6326017f490a808eb7caf214400 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 16 Dec 2015 13:51:52 +0900 Subject: usb: renesas_usbhs: add device tree support for r8a779[23] Simply document new compatibility string. As a previous patch adds a generic R-Car Gen2 compatibility string there appears to be no need for a driver updates. Signed-off-by: Simon Horman Acked-by: Rob Herring Acked-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index 45d9ae13ffa3..b6040563e51a 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -5,6 +5,8 @@ Required properties: - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device + - "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device + - "renesas,usbhs-r8a7793" for r8a7793 (R-Car M2-N) compatible device - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device - "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device -- cgit v1.2.3 From 343f40f0a70eb7cee9cc8d6fcfbb3917252a5245 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Wed, 16 Dec 2015 13:12:16 +0800 Subject: f2fs: introduce new option for controlling data flush Add a new option 'data_flush' to enable data flush functionality. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim --- Documentation/filesystems/f2fs.txt | 2 ++ fs/f2fs/f2fs.h | 1 + fs/f2fs/super.c | 7 +++++++ 3 files changed, 10 insertions(+) (limited to 'Documentation') diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index ad10494aa224..e1c9f0849da6 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -149,6 +149,8 @@ noextent_cache Disable an extent cache based on rb-tree explicitly, see the above extent_cache mount option. noinline_data Disable the inline data feature, inline data feature is enabled by default. +data_flush Enable data flushing before checkpoint in order to + persist data of regular and symlink. ================================================================================ DEBUGFS ENTRIES diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 03a2b86a28ba..b1fb8f73fe42 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -54,6 +54,7 @@ #define F2FS_MOUNT_FASTBOOT 0x00001000 #define F2FS_MOUNT_EXTENT_CACHE 0x00002000 #define F2FS_MOUNT_FORCE_FG_GC 0x00004000 +#define F2FS_MOUNT_DATA_FLUSH 0x00008000 #define clear_opt(sbi, option) (sbi->mount_opt.opt &= ~F2FS_MOUNT_##option) #define set_opt(sbi, option) (sbi->mount_opt.opt |= F2FS_MOUNT_##option) diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 5b596d6a8d24..c3070c149c0e 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -67,6 +67,7 @@ enum { Opt_extent_cache, Opt_noextent_cache, Opt_noinline_data, + Opt_data_flush, Opt_err, }; @@ -91,6 +92,7 @@ static match_table_t f2fs_tokens = { {Opt_extent_cache, "extent_cache"}, {Opt_noextent_cache, "noextent_cache"}, {Opt_noinline_data, "noinline_data"}, + {Opt_data_flush, "data_flush"}, {Opt_err, NULL}, }; @@ -406,6 +408,9 @@ static int parse_options(struct super_block *sb, char *options) case Opt_noinline_data: clear_opt(sbi, INLINE_DATA); break; + case Opt_data_flush: + set_opt(sbi, DATA_FLUSH); + break; default: f2fs_msg(sb, KERN_ERR, "Unrecognized mount option \"%s\" or missing value", @@ -687,6 +692,8 @@ static int f2fs_show_options(struct seq_file *seq, struct dentry *root) seq_puts(seq, ",extent_cache"); else seq_puts(seq, ",noextent_cache"); + if (test_opt(sbi, DATA_FLUSH)) + seq_puts(seq, ",data_flush"); seq_printf(seq, ",active_logs=%u", sbi->active_logs); return 0; -- cgit v1.2.3 From 40e3be3933aee185fd6ab1ec87dfaf3502d9f5b3 Mon Sep 17 00:00:00 2001 From: Damien Riegel Date: Wed, 16 Dec 2015 11:49:14 -0800 Subject: Input: add touchscreen support for TS-4800 On this board, the touchscreen, an ads7843, is not handled directly by Linux but by a companion FPGA. This FPGA is memory-mapped and the IP design is very similar to the mk712. This commit adds the support for this IP. Signed-off-by: Damien Riegel Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/ts4800-ts.txt | 11 ++ drivers/input/touchscreen/Kconfig | 16 ++ drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/ts4800-ts.c | 216 +++++++++++++++++++++ 4 files changed, 244 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ts4800-ts.txt create mode 100644 drivers/input/touchscreen/ts4800-ts.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/input/touchscreen/ts4800-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/ts4800-ts.txt new file mode 100644 index 000000000000..4c1c092c276b --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ts4800-ts.txt @@ -0,0 +1,11 @@ +* TS-4800 Touchscreen bindings + +Required properties: +- compatible: must be "technologic,ts4800-ts" +- reg: physical base address of the controller and length of memory mapped + region. +- syscon: phandle / integers array that points to the syscon node which + describes the FPGA's syscon registers. + - phandle to FPGA's syscon + - offset to the touchscreen register + - offset to the touchscreen enable bit diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 9bcb718668b2..f986e8b44b5f 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -937,6 +937,22 @@ config TOUCHSCREEN_TOUCHIT213 To compile this driver as a module, choose M here: the module will be called touchit213. +config TOUCHSCREEN_TS4800 + tristate "TS-4800 touchscreen" + depends on HAS_IOMEM && OF + select MFD_SYSCON + select INPUT_POLLDEV + help + Say Y here if you have a touchscreen on a TS-4800 board. + + On TS-4800, the touchscreen is not handled directly by Linux but by + a companion FPGA. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ts4800_ts. + config TOUCHSCREEN_TSC_SERIO tristate "TSC-10/25/40 serial touchscreen support" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 001357c3f73f..968ff12e3132 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o +obj-$(CONFIG_TOUCHSCREEN_TS4800) += ts4800-ts.o obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o diff --git a/drivers/input/touchscreen/ts4800-ts.c b/drivers/input/touchscreen/ts4800-ts.c new file mode 100644 index 000000000000..3c3dd78303be --- /dev/null +++ b/drivers/input/touchscreen/ts4800-ts.c @@ -0,0 +1,216 @@ +/* + * Touchscreen driver for the TS-4800 board + * + * Copyright (c) 2015 - Savoir-faire Linux + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* polling interval in ms */ +#define POLL_INTERVAL 3 + +#define DEBOUNCE_COUNT 1 + +/* sensor values are 12-bit wide */ +#define MAX_12BIT ((1 << 12) - 1) + +#define PENDOWN_MASK 0x1 + +#define X_OFFSET 0x0 +#define Y_OFFSET 0x2 + +struct ts4800_ts { + struct input_polled_dev *poll_dev; + struct device *dev; + char phys[32]; + + void __iomem *base; + struct regmap *regmap; + unsigned int reg; + unsigned int bit; + + bool pendown; + int debounce; +}; + +static void ts4800_ts_open(struct input_polled_dev *dev) +{ + struct ts4800_ts *ts = dev->private; + int ret; + + ts->pendown = false; + ts->debounce = DEBOUNCE_COUNT; + + ret = regmap_update_bits(ts->regmap, ts->reg, ts->bit, ts->bit); + if (ret) + dev_warn(ts->dev, "Failed to enable touchscreen\n"); +} + +static void ts4800_ts_close(struct input_polled_dev *dev) +{ + struct ts4800_ts *ts = dev->private; + int ret; + + ret = regmap_update_bits(ts->regmap, ts->reg, ts->bit, 0); + if (ret) + dev_warn(ts->dev, "Failed to disable touchscreen\n"); + +} + +static void ts4800_ts_poll(struct input_polled_dev *dev) +{ + struct input_dev *input_dev = dev->input; + struct ts4800_ts *ts = dev->private; + u16 last_x = readw(ts->base + X_OFFSET); + u16 last_y = readw(ts->base + Y_OFFSET); + bool pendown = last_x & PENDOWN_MASK; + + if (pendown) { + if (ts->debounce) { + ts->debounce--; + return; + } + + if (!ts->pendown) { + input_report_key(input_dev, BTN_TOUCH, 1); + ts->pendown = true; + } + + last_x = ((~last_x) >> 4) & MAX_12BIT; + last_y = ((~last_y) >> 4) & MAX_12BIT; + + input_report_abs(input_dev, ABS_X, last_x); + input_report_abs(input_dev, ABS_Y, last_y); + input_sync(input_dev); + } else if (ts->pendown) { + ts->pendown = false; + ts->debounce = DEBOUNCE_COUNT; + input_report_key(input_dev, BTN_TOUCH, 0); + input_sync(input_dev); + } +} + +static int ts4800_parse_dt(struct platform_device *pdev, + struct ts4800_ts *ts) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *syscon_np; + u32 reg, bit; + int error; + + syscon_np = of_parse_phandle(np, "syscon", 0); + if (!syscon_np) { + dev_err(dev, "no syscon property\n"); + return -ENODEV; + } + + error = of_property_read_u32_index(np, "syscon", 1, ®); + if (error < 0) { + dev_err(dev, "no offset in syscon\n"); + return error; + } + + ts->reg = reg; + + error = of_property_read_u32_index(np, "syscon", 2, &bit); + if (error < 0) { + dev_err(dev, "no bit in syscon\n"); + return error; + } + + ts->bit = BIT(bit); + + ts->regmap = syscon_node_to_regmap(syscon_np); + if (IS_ERR(ts->regmap)) { + dev_err(dev, "cannot get parent's regmap\n"); + return PTR_ERR(ts->regmap); + } + + return 0; +} + +static int ts4800_ts_probe(struct platform_device *pdev) +{ + struct input_polled_dev *poll_dev; + struct ts4800_ts *ts; + struct resource *res; + int error; + + ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + error = ts4800_parse_dt(pdev, ts); + if (error) + return error; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ts->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ts->base)) + return PTR_ERR(ts->base); + + poll_dev = devm_input_allocate_polled_device(&pdev->dev); + if (!poll_dev) + return -ENOMEM; + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&pdev->dev)); + ts->poll_dev = poll_dev; + ts->dev = &pdev->dev; + + poll_dev->private = ts; + poll_dev->poll_interval = POLL_INTERVAL; + poll_dev->open = ts4800_ts_open; + poll_dev->close = ts4800_ts_close; + poll_dev->poll = ts4800_ts_poll; + + poll_dev->input->name = "TS-4800 Touchscreen"; + poll_dev->input->phys = ts->phys; + + input_set_capability(poll_dev->input, EV_KEY, BTN_TOUCH); + input_set_abs_params(poll_dev->input, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(poll_dev->input, ABS_Y, 0, MAX_12BIT, 0, 0); + + error = input_register_polled_device(poll_dev); + if (error) { + dev_err(&pdev->dev, + "Unabled to register polled input device (%d)\n", + error); + return error; + } + + return 0; +} + +static const struct of_device_id ts4800_ts_of_match[] = { + { .compatible = "technologic,ts4800-ts", }, + { }, +}; +MODULE_DEVICE_TABLE(of, ts4800_ts_of_match); + +static struct platform_driver ts4800_ts_driver = { + .driver = { + .name = "ts4800-ts", + .of_match_table = ts4800_ts_of_match, + }, + .probe = ts4800_ts_probe, +}; +module_platform_driver(ts4800_ts_driver); + +MODULE_AUTHOR("Damien Riegel "); +MODULE_DESCRIPTION("TS-4800 Touchscreen Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:ts4800_ts"); -- cgit v1.2.3 From a9ec81f4ed5c05dbbc671e5fa39de0540eb0495f Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 14 Sep 2015 15:14:23 +0300 Subject: serial: sh-sci: Drop the interface clock As no platform defines an interface clock the SCI driver always falls back to a clock named "peripheral_clk". - On SH platforms that clock is the base clock for the SCI functional clock and has the same frequency, - On ARM platforms that clock doesn't exist, and clk_get() will return the default clock for the device. We can thus make the functional clock mandatory and drop the interface clock. EPROBE_DEFER is handled for clocks that may be referenced from DT (i.e. "fck", and the deprecated "sci_ick"). Cc: devicetree@vger.kernel.org Signed-off-by: Laurent Pinchart Acked-by: Simon Horman [geert: Handle EPROBE_DEFER, reformat description, break long comment line] Signed-off-by: Geert Uytterhoeven Acked-by: Rob Herring Acked-by: Greg Kroah-Hartman --- .../bindings/serial/renesas,sci-serial.txt | 4 +- drivers/tty/serial/sh-sci.c | 64 ++++++++++++++-------- 2 files changed, 43 insertions(+), 25 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 73f825e5e644..2c9e6b8477e9 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -42,7 +42,7 @@ Required properties: - clocks: Must contain a phandle and clock-specifier pair for each entry in clock-names. - - clock-names: Must contain "sci_ick" for the SCIx UART interface clock. + - clock-names: Must contain "fck" for the SCIx UART functional clock. Note: Each enabled SCIx UART should have an alias correctly numbered in the "aliases" node. @@ -63,7 +63,7 @@ Example: interrupt-parent = <&gic>; interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; - clock-names = "sci_ick"; + clock-names = "fck"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; }; diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 960e50a97558..cc6fa55231ba 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -92,8 +92,6 @@ struct sci_port { struct timer_list break_timer; int break_flag; - /* Interface clock */ - struct clk *iclk; /* Function clock */ struct clk *fclk; @@ -457,9 +455,8 @@ static void sci_port_enable(struct sci_port *sci_port) pm_runtime_get_sync(sci_port->port.dev); - clk_prepare_enable(sci_port->iclk); - sci_port->port.uartclk = clk_get_rate(sci_port->iclk); clk_prepare_enable(sci_port->fclk); + sci_port->port.uartclk = clk_get_rate(sci_port->fclk); } static void sci_port_disable(struct sci_port *sci_port) @@ -476,7 +473,6 @@ static void sci_port_disable(struct sci_port *sci_port) sci_port->break_flag = 0; clk_disable_unprepare(sci_port->fclk); - clk_disable_unprepare(sci_port->iclk); pm_runtime_put_sync(sci_port->port.dev); } @@ -1622,7 +1618,7 @@ static int sci_notifier(struct notifier_block *self, struct uart_port *port = &sci_port->port; spin_lock_irqsave(&port->lock, flags); - port->uartclk = clk_get_rate(sci_port->iclk); + port->uartclk = clk_get_rate(sci_port->fclk); spin_unlock_irqrestore(&port->lock, flags); } @@ -2241,6 +2237,42 @@ static struct uart_ops sci_uart_ops = { #endif }; +static int sci_init_clocks(struct sci_port *sci_port, struct device *dev) +{ + /* Get the SCI functional clock. It's called "fck" on ARM. */ + sci_port->fclk = clk_get(dev, "fck"); + if (PTR_ERR(sci_port->fclk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (!IS_ERR(sci_port->fclk)) + return 0; + + /* + * But it used to be called "sci_ick", and we need to maintain DT + * backward compatibility. + */ + sci_port->fclk = clk_get(dev, "sci_ick"); + if (PTR_ERR(sci_port->fclk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (!IS_ERR(sci_port->fclk)) + return 0; + + /* SH has historically named the clock "sci_fck". */ + sci_port->fclk = clk_get(dev, "sci_fck"); + if (!IS_ERR(sci_port->fclk)) + return 0; + + /* + * Not all SH platforms declare a clock lookup entry for SCI devices, + * in which case we need to get the global "peripheral_clk" clock. + */ + sci_port->fclk = clk_get(dev, "peripheral_clk"); + if (!IS_ERR(sci_port->fclk)) + return 0; + + dev_err(dev, "failed to get functional clock\n"); + return PTR_ERR(sci_port->fclk); +} + static int sci_init_single(struct platform_device *dev, struct sci_port *sci_port, unsigned int index, struct plat_sci_port *p, bool early) @@ -2333,22 +2365,9 @@ static int sci_init_single(struct platform_device *dev, sci_port->sampling_rate = p->sampling_rate; if (!early) { - sci_port->iclk = clk_get(&dev->dev, "sci_ick"); - if (IS_ERR(sci_port->iclk)) { - sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); - if (IS_ERR(sci_port->iclk)) { - dev_err(&dev->dev, "can't get iclk\n"); - return PTR_ERR(sci_port->iclk); - } - } - - /* - * The function clock is optional, ignore it if we can't - * find it. - */ - sci_port->fclk = clk_get(&dev->dev, "sci_fck"); - if (IS_ERR(sci_port->fclk)) - sci_port->fclk = NULL; + ret = sci_init_clocks(sci_port, &dev->dev); + if (ret < 0) + return ret; port->dev = &dev->dev; @@ -2405,7 +2424,6 @@ static int sci_init_single(struct platform_device *dev, static void sci_cleanup_single(struct sci_port *port) { - clk_put(port->iclk); clk_put(port->fclk); pm_runtime_disable(port->port.dev); -- cgit v1.2.3 From 598604ff22109a025af8d5038664ebeb2402afdc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 11 Dec 2015 12:48:15 +0100 Subject: serial: sh-sci: Add fallback compatibility strings Add fallback compatibility strings for R-Car Gen1, Gen2, and Gen3. This is in keeping with the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Geert Uytterhoeven --- .../devicetree/bindings/serial/renesas,sci-serial.txt | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 2c9e6b8477e9..7091213f0251 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -2,7 +2,7 @@ Required properties: - - compatible: Must contain one of the following: + - compatible: Must contain one or more of the following: - "renesas,scif-r7s72100" for R7S72100 (RZ/A1H) SCIF compatible UART. - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART. @@ -27,6 +27,14 @@ Required properties: - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. + - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART, + - "renesas,rcar-gen2-scif" for R-Car Gen2 SCIF compatible UART, + - "renesas,rcar-gen3-scif" for R-Car Gen3 SCIF compatible UART, + - "renesas,rcar-gen2-scifa" for R-Car Gen2 SCIFA compatible UART, + - "renesas,rcar-gen2-scifb" for R-Car Gen2 SCIFB compatible UART, + - "renesas,rcar-gen1-hscif" for R-Car Gen1 HSCIF compatible UART, + - "renesas,rcar-gen2-hscif" for R-Car Gen2 HSCIF compatible UART, + - "renesas,rcar-gen3-hscif" for R-Car Gen3 HSCIF compatible UART, - "renesas,scif" for generic SCIF compatible UART. - "renesas,scifa" for generic SCIFA compatible UART. - "renesas,scifb" for generic SCIFB compatible UART. @@ -34,8 +42,8 @@ Required properties: - "renesas,sci" for generic SCI compatible UART. When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first followed by the - generic version. + SoC-specific version corresponding to the platform first, followed by the + family-specific and/or generic versions. - reg: Base address and length of the I/O registers used by the UART. - interrupts: Must contain an interrupt-specifier for the SCIx interrupt. @@ -58,7 +66,8 @@ Example: }; scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7790", "renesas,scifa"; + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; reg = <0 0xe6c40000 0 64>; interrupt-parent = <&gic>; interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; -- cgit v1.2.3 From 9a040c9f2170e0e6d092fc7cf8289a4466b8d8d6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 12 Nov 2015 13:44:29 +0100 Subject: serial: sh-sci: Update DT binding documentation for external clock input Amend the DT bindings to include the optional external clock on (H)SCI(F) and some SCIFA, where this pin can serve as a clock input, depending on board wiring. Clarify the use of the divided functional clock as a source for the sampling clock. Signed-off-by: Geert Uytterhoeven Acked-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 7091213f0251..31cc0631ef7c 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -51,6 +51,11 @@ Required properties: - clocks: Must contain a phandle and clock-specifier pair for each entry in clock-names. - clock-names: Must contain "fck" for the SCIx UART functional clock. + Apart from the divided functional clock, there may be other possible + sources for the sampling clock, depending on SCIx variant. + On (H)SCI(F) and some SCIFA, an additional clock may be specified: + - "hsck" for the optional external clock input (on HSCIF), + - "sck" for the optional external clock input (on other variants). Note: Each enabled SCIx UART should have an alias correctly numbered in the "aliases" node. -- cgit v1.2.3 From 176ae5f674ebd2049f99e97eb8319200f1d211b6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 26 Oct 2015 09:43:22 +0100 Subject: serial: sh-sci: Update DT binding documentation for BRG support Amend the DT bindings to include the optional clock sources for the Baud Rate Generator for External Clock (BRG), as found on some SCIF variants and on HSCIF. Signed-off-by: Geert Uytterhoeven Acked-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 31cc0631ef7c..f4ad30ef1628 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -56,6 +56,12 @@ Required properties: On (H)SCI(F) and some SCIFA, an additional clock may be specified: - "hsck" for the optional external clock input (on HSCIF), - "sck" for the optional external clock input (on other variants). + On UARTs equipped with a Baud Rate Generator for External Clock (BRG) + (some SCIF and HSCIF), additional clocks may be specified: + - "brg_int" for the optional internal clock source for the frequency + divider (typically the (AXI or SHwy) bus clock), + - "scif_clk" for the optional external clock source for the frequency + divider (SCIF_CLK). Note: Each enabled SCIx UART should have an alias correctly numbered in the "aliases" node. -- cgit v1.2.3 From ec6e1b4082d9f5b0858ce33169a1c22a27a982f6 Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Thu, 17 Dec 2015 15:57:34 -0800 Subject: Input: goodix - reset device at init After power on, it is recommended that the driver resets the device. The reset procedure timing is described in the datasheet and is used at device init (before writing device configuration) and for power management. It is a sequence of setting the interrupt and reset pins high/low at specific timing intervals. This procedure also includes setting the slave address to the one specified in the ACPI/device tree. This is based on Goodix datasheets for GT911 and GT9271 and on Goodix driver gt9xx.c for Android (publicly available in Android kernel trees for various devices). For reset the driver needs to control the interrupt and reset gpio pins (configured through ACPI/device tree). For devices that do not have the gpio pins properly declared, the functionality depending on these pins will not be available, but the device can still be used with basic functionality. For both device tree and ACPI, the interrupt gpio pin configuration is read from the "irq-gpios" property and the reset pin configuration is read from the "reset-gpios" property. For ACPI 5.1, named properties can be specified using the _DSD section. This functionality will not be available for devices that use indexed gpio pins declared in the _CRS section (we need to provide backward compatibility with devices that do not support using the interrupt gpio pin as output). For ACPI, the pins can be specified using ACPI 5.1: Device (STAC) { Name (_HID, "GDIX1001") ... Method (_CRS, 0, Serialized) { Name (RBUF, ResourceTemplate () { I2cSerialBus (0x0014, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\I2C0", 0x00, ResourceConsumer, , ) GpioInt (Edge, ActiveHigh, Exclusive, PullNone, 0x0000, "\\I2C0", 0x00, ResourceConsumer, , ) { // Pin list 0 } GpioIo (Exclusive, PullDown, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\I2C0", 0x00, ResourceConsumer, , ) { 1 } }) Return (RBUF) } Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package (2) {"irq-gpios", Package() {^STAC, 0, 0, 0 }}, Package (2) {"reset-gpios", Package() {^STAC, 1, 0, 0 }}, ... } } Signed-off-by: Octavian Purdila Signed-off-by: Irina Tirdea Acked-by: Rob Herring Acked-by: Bastien Nocera Tested-by: Bastien Nocera Tested-by: Aleksei Mamlin Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/goodix.txt | 9 ++ drivers/input/touchscreen/Kconfig | 1 + drivers/input/touchscreen/goodix.c | 119 +++++++++++++++++++++ 3 files changed, 129 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt index 8ba98eec765b..c42d2cebac8e 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -13,6 +13,12 @@ Required properties: - interrupt-parent : Interrupt controller to which the chip is connected - interrupts : Interrupt to which the chip is connected +Optional properties: + + - irq-gpios : GPIO pin used for IRQ. The driver uses the + interrupt gpio pin as output to reset the device. + - reset-gpios : GPIO pin used for reset + Example: i2c@00000000 { @@ -23,6 +29,9 @@ Example: reg = <0x5d>; interrupt-parent = <&gpio>; interrupts = <0 0>; + + irq-gpios = <&gpio1 0 0>; + reset-gpios = <&gpio1 1 0>; }; /* ... */ diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index ae33da7ab51f..709527cd4c2e 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -324,6 +324,7 @@ config TOUCHSCREEN_FUJITSU config TOUCHSCREEN_GOODIX tristate "Goodix I2C touchscreen" depends on I2C + depends on GPIOLIB help Say Y here if you have the Goodix touchscreen (such as one installed in Onda v975w tablets) connected to your diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 5479aa17dba8..6ad379aace72 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include @@ -37,8 +38,13 @@ struct goodix_ts_data { unsigned int int_trigger_type; bool rotated_screen; int cfg_len; + struct gpio_desc *gpiod_int; + struct gpio_desc *gpiod_rst; }; +#define GOODIX_GPIO_INT_NAME "irq" +#define GOODIX_GPIO_RST_NAME "reset" + #define GOODIX_MAX_HEIGHT 4096 #define GOODIX_MAX_WIDTH 4096 #define GOODIX_INT_TRIGGER 1 @@ -239,6 +245,106 @@ static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } +static int goodix_int_sync(struct goodix_ts_data *ts) +{ + int error; + + error = gpiod_direction_output(ts->gpiod_int, 0); + if (error) + return error; + + msleep(50); /* T5: 50ms */ + + error = gpiod_direction_input(ts->gpiod_int); + if (error) + return error; + + return 0; +} + +/** + * goodix_reset - Reset device during power on + * + * @ts: goodix_ts_data pointer + */ +static int goodix_reset(struct goodix_ts_data *ts) +{ + int error; + + /* begin select I2C slave addr */ + error = gpiod_direction_output(ts->gpiod_rst, 0); + if (error) + return error; + + msleep(20); /* T2: > 10ms */ + + /* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */ + error = gpiod_direction_output(ts->gpiod_int, ts->client->addr == 0x14); + if (error) + return error; + + usleep_range(100, 2000); /* T3: > 100us */ + + error = gpiod_direction_output(ts->gpiod_rst, 1); + if (error) + return error; + + usleep_range(6000, 10000); /* T4: > 5ms */ + + /* end select I2C slave addr */ + error = gpiod_direction_input(ts->gpiod_rst); + if (error) + return error; + + error = goodix_int_sync(ts); + if (error) + return error; + + return 0; +} + +/** + * goodix_get_gpio_config - Get GPIO config from ACPI/DT + * + * @ts: goodix_ts_data pointer + */ +static int goodix_get_gpio_config(struct goodix_ts_data *ts) +{ + int error; + struct device *dev; + struct gpio_desc *gpiod; + + if (!ts->client) + return -EINVAL; + dev = &ts->client->dev; + + /* Get the interrupt GPIO pin number */ + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN); + if (IS_ERR(gpiod)) { + error = PTR_ERR(gpiod); + if (error != -EPROBE_DEFER) + dev_dbg(dev, "Failed to get %s GPIO: %d\n", + GOODIX_GPIO_INT_NAME, error); + return error; + } + + ts->gpiod_int = gpiod; + + /* Get the reset line GPIO pin number */ + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_IN); + if (IS_ERR(gpiod)) { + error = PTR_ERR(gpiod); + if (error != -EPROBE_DEFER) + dev_dbg(dev, "Failed to get %s GPIO: %d\n", + GOODIX_GPIO_RST_NAME, error); + return error; + } + + ts->gpiod_rst = gpiod; + + return 0; +} + /** * goodix_read_config - Read the embedded configuration of the panel * @@ -407,6 +513,19 @@ static int goodix_ts_probe(struct i2c_client *client, ts->client = client; i2c_set_clientdata(client, ts); + error = goodix_get_gpio_config(ts); + if (error) + return error; + + if (ts->gpiod_int && ts->gpiod_rst) { + /* reset the controller */ + error = goodix_reset(ts); + if (error) { + dev_err(&client->dev, "Controller reset failed.\n"); + return error; + } + } + error = goodix_i2c_test(client); if (error) { dev_err(&client->dev, "I2C communication failure: %d\n", error); -- cgit v1.2.3 From ad48cf5e9597147bb2bb526a6d379ee88970dec8 Mon Sep 17 00:00:00 2001 From: Karsten Merker Date: Thu, 17 Dec 2015 17:02:53 -0800 Subject: Input: goodix - add axis swapping and axis inversion support Implement support for the following device-tree and ACPI 5.1 DSD properties in the goodix touchscreen driver: - touchscreen-inverted-x: X axis is inverted (boolean) - touchscreen-inverted-y: Y axis is inverted (boolean) - touchscreen-swapped-x-y: X and Y axis are swapped (boolean) These are necessary on tablets which have a display in portrait format while the touchscreen is in landscape format, such as e.g. the MSI Primo 81. Signed-off-by: Karsten Merker Tested-by: Bastien Nocera Tested-by: Irina Tirdea (with ACPI DSD properties) Tested-by: Aleksei Mamlin (with device-tree properties) Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/goodix.txt | 5 +++++ drivers/input/touchscreen/goodix.c | 25 ++++++++++++++++++++++ 2 files changed, 30 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt index c42d2cebac8e..c98757a69110 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -19,6 +19,11 @@ Optional properties: interrupt gpio pin as output to reset the device. - reset-gpios : GPIO pin used for reset + - touchscreen-inverted-x : X axis is inverted (boolean) + - touchscreen-inverted-y : Y axis is inverted (boolean) + - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) + (swapping is done after inverting the axis) + Example: i2c@00000000 { diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 0acefe49540d..b5e910a44cdf 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -2,6 +2,7 @@ * Driver for Goodix Touchscreens * * Copyright (c) 2014 Red Hat Inc. + * Copyright (c) 2015 K. Merker * * This code is based on gt9xx.c authored by andrew@goodix.com: * @@ -35,6 +36,9 @@ struct goodix_ts_data { struct input_dev *input_dev; int abs_x_max; int abs_y_max; + bool swapped_x_y; + bool inverted_x; + bool inverted_y; unsigned int max_touch_num; unsigned int int_trigger_type; bool rotated_screen; @@ -235,6 +239,14 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data) input_y = ts->abs_y_max - input_y; } + /* Inversions have to happen before axis swapping */ + if (ts->inverted_x) + input_x = ts->abs_x_max - input_x; + if (ts->inverted_y) + input_y = ts->abs_y_max - input_y; + if (ts->swapped_x_y) + swap(input_x, input_y); + input_mt_slot(ts->input_dev, id); input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true); input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x); @@ -486,6 +498,8 @@ static void goodix_read_config(struct goodix_ts_data *ts) error); ts->abs_x_max = GOODIX_MAX_WIDTH; ts->abs_y_max = GOODIX_MAX_HEIGHT; + if (ts->swapped_x_y) + swap(ts->abs_x_max, ts->abs_y_max); ts->int_trigger_type = GOODIX_INT_TRIGGER; ts->max_touch_num = GOODIX_MAX_CONTACTS; return; @@ -493,6 +507,8 @@ static void goodix_read_config(struct goodix_ts_data *ts) ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]); ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]); + if (ts->swapped_x_y) + swap(ts->abs_x_max, ts->abs_y_max); ts->int_trigger_type = config[TRIGGER_LOC] & 0x03; ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f; if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) { @@ -500,6 +516,8 @@ static void goodix_read_config(struct goodix_ts_data *ts) "Invalid config, using defaults\n"); ts->abs_x_max = GOODIX_MAX_WIDTH; ts->abs_y_max = GOODIX_MAX_HEIGHT; + if (ts->swapped_x_y) + swap(ts->abs_x_max, ts->abs_y_max); ts->max_touch_num = GOODIX_MAX_CONTACTS; } @@ -622,6 +640,13 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) { int error; + ts->swapped_x_y = device_property_read_bool(&ts->client->dev, + "touchscreen-swapped-x-y"); + ts->inverted_x = device_property_read_bool(&ts->client->dev, + "touchscreen-inverted-x"); + ts->inverted_y = device_property_read_bool(&ts->client->dev, + "touchscreen-inverted-y"); + goodix_read_config(ts); error = goodix_request_input_dev(ts); -- cgit v1.2.3 From a8135d0d79e9d0ad3a4ff494fceeaae838becf38 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 14 Dec 2015 22:47:40 +0200 Subject: dmaengine: core: Introduce new, universal API to request a channel The two API function can cover most, if not all current APIs used to request a channel. With minimal effort dmaengine drivers, platforms and dmaengine user drivers can be converted to use the two function. struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); To request any channel matching with the requested capabilities, can be used to request channel for memcpy, memset, xor, etc where no hardware synchronization is needed. struct dma_chan *dma_request_chan(struct device *dev, const char *name); To request a slave channel. The dma_request_chan() will try to find the channel via DT, ACPI or in case if the kernel booted in non DT/ACPI mode it will use a filter lookup table and retrieves the needed information from the dma_slave_map provided by the DMA drivers. This legacy mode needs changes in platform code, in dmaengine drivers and finally the dmaengine user drivers can be converted: For each dmaengine driver an array of DMA device, slave and the parameter for the filter function needs to be added: static const struct dma_slave_map da830_edma_map[] = { { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, { "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) }, { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) }, { "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) }, { "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) }, { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, }; This information is going to be needed by the dmaengine driver, so modification to the platform_data is needed, and the driver map should be added to the pdata of the DMA driver: da8xx_edma0_pdata.slave_map = da830_edma_map; da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map); The DMA driver then needs to configure the needed device -> filter_fn mapping before it registers with dma_async_device_register() : ecc->dma_slave.filter_map.map = info->slave_map; ecc->dma_slave.filter_map.mapcnt = info->slavecnt; ecc->dma_slave.filter_map.fn = edma_filter_fn; When neither DT or ACPI lookup is available the dma_request_chan() will try to match the requester's device name with the filter_map's list of device names, when a match found it will use the information from the dma_slave_map to get the channel with the dma_get_channel() internal function. Signed-off-by: Peter Ujfalusi Reviewed-by: Arnd Bergmann Signed-off-by: Vinod Koul --- Documentation/dmaengine/client.txt | 23 +++------- drivers/dma/dmaengine.c | 89 +++++++++++++++++++++++++++++++++----- include/linux/dmaengine.h | 51 +++++++++++++++++++--- 3 files changed, 127 insertions(+), 36 deletions(-) (limited to 'Documentation') diff --git a/Documentation/dmaengine/client.txt b/Documentation/dmaengine/client.txt index 11fb87ff6cd0..4b04d8988708 100644 --- a/Documentation/dmaengine/client.txt +++ b/Documentation/dmaengine/client.txt @@ -22,25 +22,14 @@ The slave DMA usage consists of following steps: Channel allocation is slightly different in the slave DMA context, client drivers typically need a channel from a particular DMA controller only and even in some cases a specific channel is desired. - To request a channel dma_request_channel() API is used. + To request a channel dma_request_chan() API is used. Interface: - struct dma_chan *dma_request_channel(dma_cap_mask_t mask, - dma_filter_fn filter_fn, - void *filter_param); - where dma_filter_fn is defined as: - typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param); - - The 'filter_fn' parameter is optional, but highly recommended for - slave and cyclic channels as they typically need to obtain a specific - DMA channel. - - When the optional 'filter_fn' parameter is NULL, dma_request_channel() - simply returns the first channel that satisfies the capability mask. - - Otherwise, the 'filter_fn' routine will be called once for each free - channel which has a capability in 'mask'. 'filter_fn' is expected to - return 'true' when the desired DMA channel is found. + struct dma_chan *dma_request_chan(struct device *dev, const char *name); + + Which will find and return the 'name' DMA channel associated with the 'dev' + device. The association is done via DT, ACPI or board file based + dma_slave_map matching table. A channel allocated via this interface is exclusive to the caller, until dma_release_channel() is called. diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 81a36fc445a7..a094dbb54f46 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -43,6 +43,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include #include #include @@ -665,27 +666,73 @@ struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, } EXPORT_SYMBOL_GPL(__dma_request_channel); +static const struct dma_slave_map *dma_filter_match(struct dma_device *device, + const char *name, + struct device *dev) +{ + int i; + + if (!device->filter.mapcnt) + return NULL; + + for (i = 0; i < device->filter.mapcnt; i++) { + const struct dma_slave_map *map = &device->filter.map[i]; + + if (!strcmp(map->devname, dev_name(dev)) && + !strcmp(map->slave, name)) + return map; + } + + return NULL; +} + /** - * dma_request_slave_channel_reason - try to allocate an exclusive slave channel + * dma_request_chan - try to allocate an exclusive slave channel * @dev: pointer to client device structure * @name: slave channel name * * Returns pointer to appropriate DMA channel on success or an error pointer. */ -struct dma_chan *dma_request_slave_channel_reason(struct device *dev, - const char *name) +struct dma_chan *dma_request_chan(struct device *dev, const char *name) { + struct dma_device *d, *_d; + struct dma_chan *chan = NULL; + /* If device-tree is present get slave info from here */ if (dev->of_node) - return of_dma_request_slave_channel(dev->of_node, name); + chan = of_dma_request_slave_channel(dev->of_node, name); /* If device was enumerated by ACPI get slave info from here */ - if (ACPI_HANDLE(dev)) - return acpi_dma_request_slave_chan_by_name(dev, name); + if (has_acpi_companion(dev) && !chan) + chan = acpi_dma_request_slave_chan_by_name(dev, name); + + if (chan) { + /* Valid channel found or requester need to be deferred */ + if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER) + return chan; + } + + /* Try to find the channel via the DMA filter map(s) */ + mutex_lock(&dma_list_mutex); + list_for_each_entry_safe(d, _d, &dma_device_list, global_node) { + dma_cap_mask_t mask; + const struct dma_slave_map *map = dma_filter_match(d, name, dev); + + if (!map) + continue; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); - return ERR_PTR(-ENODEV); + chan = find_candidate(d, &mask, d->filter.fn, map->param); + if (!IS_ERR(chan)) + break; + } + mutex_unlock(&dma_list_mutex); + + return chan ? chan : ERR_PTR(-EPROBE_DEFER); } -EXPORT_SYMBOL_GPL(dma_request_slave_channel_reason); +EXPORT_SYMBOL_GPL(dma_request_chan); /** * dma_request_slave_channel - try to allocate an exclusive slave channel @@ -697,17 +744,35 @@ EXPORT_SYMBOL_GPL(dma_request_slave_channel_reason); struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name) { - struct dma_chan *ch = dma_request_slave_channel_reason(dev, name); + struct dma_chan *ch = dma_request_chan(dev, name); if (IS_ERR(ch)) return NULL; - dma_cap_set(DMA_PRIVATE, ch->device->cap_mask); - ch->device->privatecnt++; - return ch; } EXPORT_SYMBOL_GPL(dma_request_slave_channel); +/** + * dma_request_chan_by_mask - allocate a channel satisfying certain capabilities + * @mask: capabilities that the channel must satisfy + * + * Returns pointer to appropriate DMA channel on success or an error pointer. + */ +struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask) +{ + struct dma_chan *chan; + + if (!mask) + return ERR_PTR(-ENODEV); + + chan = __dma_request_channel(mask, NULL, NULL); + if (!chan) + chan = ERR_PTR(-ENODEV); + + return chan; +} +EXPORT_SYMBOL_GPL(dma_request_chan_by_mask); + void dma_release_channel(struct dma_chan *chan) { mutex_lock(&dma_list_mutex); diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index c47c68e535e8..d50a6b51a73d 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -606,12 +606,39 @@ enum dmaengine_alignment { DMAENGINE_ALIGN_64_BYTES = 6, }; +/** + * struct dma_slave_map - associates slave device and it's slave channel with + * parameter to be used by a filter function + * @devname: name of the device + * @slave: slave channel name + * @param: opaque parameter to pass to struct dma_filter.fn + */ +struct dma_slave_map { + const char *devname; + const char *slave; + void *param; +}; + +/** + * struct dma_filter - information for slave device/channel to filter_fn/param + * mapping + * @fn: filter function callback + * @mapcnt: number of slave device/channel in the map + * @map: array of channel to filter mapping data + */ +struct dma_filter { + dma_filter_fn fn; + int mapcnt; + const struct dma_slave_map *map; +}; + /** * struct dma_device - info on the entity supplying DMA services * @chancnt: how many DMA channels are supported * @privatecnt: how many DMA channels are requested by dma_request_channel * @channels: the list of struct dma_chan * @global_node: list_head for global dma_device_list + * @filter: information for device/slave to filter function/param mapping * @cap_mask: one or more dma_capability flags * @max_xor: maximum number of xor sources, 0 if no capability * @max_pq: maximum number of PQ sources and PQ-continue capability @@ -666,6 +693,7 @@ struct dma_device { unsigned int privatecnt; struct list_head channels; struct list_head global_node; + struct dma_filter filter; dma_cap_mask_t cap_mask; unsigned short max_xor; unsigned short max_pq; @@ -1140,9 +1168,11 @@ enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); void dma_issue_pending_all(void); struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param); -struct dma_chan *dma_request_slave_channel_reason(struct device *dev, - const char *name); struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name); + +struct dma_chan *dma_request_chan(struct device *dev, const char *name); +struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); + void dma_release_channel(struct dma_chan *chan); int dma_get_slave_caps(struct dma_chan *chan, struct dma_slave_caps *caps); #else @@ -1166,16 +1196,21 @@ static inline struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, { return NULL; } -static inline struct dma_chan *dma_request_slave_channel_reason( - struct device *dev, const char *name) -{ - return ERR_PTR(-ENODEV); -} static inline struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name) { return NULL; } +static inline struct dma_chan *dma_request_chan(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENODEV); +} +static inline struct dma_chan *dma_request_chan_by_mask( + const dma_cap_mask_t *mask) +{ + return ERR_PTR(-ENODEV); +} static inline void dma_release_channel(struct dma_chan *chan) { } @@ -1186,6 +1221,8 @@ static inline int dma_get_slave_caps(struct dma_chan *chan, } #endif +#define dma_request_slave_channel_reason(dev, name) dma_request_chan(dev, name) + static inline int dmaengine_desc_set_reuse(struct dma_async_tx_descriptor *tx) { struct dma_slave_caps caps; -- cgit v1.2.3 From 3eb064e4b0f423810562b8a7aef3ca0083152e90 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 10 Dec 2015 09:00:30 +0100 Subject: mtd: nand: update the documentation to reflect framework changes The MTD device is now directly embedded in the nand_chip struct. Update the mtdnand documentation to mention this aspect and fix the different examples. Signed-off-by: Boris Brezillon Signed-off-by: Brian Norris --- Documentation/DocBook/mtdnand.tmpl | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 403a7abfc2bc..b442921bca54 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -162,12 +162,15 @@ Basic defines - At least you have to provide a mtd structure and - a storage for the ioremap'ed chip address. - You can allocate the mtd structure using kmalloc - or you can allocate it statically. - In case of static allocation you have to allocate - a nand_chip structure too. + At least you have to provide a nand_chip structure + and a storage for the ioremap'ed chip address. + You can allocate the nand_chip structure using + kmalloc or you can allocate it statically. + The NAND chip structure embeds an mtd structure + which will be registered to the MTD subsystem. + You can extract a pointer to the mtd structure + from a nand_chip pointer using the nand_to_mtd() + helper. Kmalloc based example @@ -180,7 +183,6 @@ static void __iomem *baseaddr; Static example -static struct mtd_info board_mtd; static struct nand_chip board_chip; static void __iomem *baseaddr; @@ -274,13 +276,15 @@ static int __init board_init (void) int err = 0; /* Allocate memory for MTD device structure and private data */ - board_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); - if (!board_mtd) { + this = kzalloc(sizeof(struct nand_chip), GFP_KERNEL); + if (!this) { printk ("Unable to allocate NAND MTD device structure.\n"); err = -ENOMEM; goto out; } + board_mtd = nand_to_mtd(this); + /* map physical address */ baseaddr = ioremap(CHIP_PHYSICAL_ADDRESS, 1024); if (!baseaddr) { @@ -289,11 +293,6 @@ static int __init board_init (void) goto out_mtd; } - /* Get pointer to private data */ - this = (struct nand_chip *) (); - /* Link the private data with the MTD structure */ - board_mtd->priv = this; - /* Set address of NAND IO lines */ this->IO_ADDR_R = baseaddr; this->IO_ADDR_W = baseaddr; @@ -317,7 +316,7 @@ static int __init board_init (void) out_ior: iounmap(baseaddr); out_mtd: - kfree (board_mtd); + kfree (this); out: return err; } @@ -343,7 +342,7 @@ static void __exit board_cleanup (void) iounmap(baseaddr); /* Free the MTD device structure */ - kfree (board_mtd); + kfree (mtd_to_nand(board_mtd)); } module_exit(board_cleanup); #endif -- cgit v1.2.3 From 6e17c98a004c921e07bdecdb8cc2320488f88759 Mon Sep 17 00:00:00 2001 From: Marc Titinger Date: Mon, 14 Dec 2015 12:01:10 +0100 Subject: iio: ina2xx: add ABI documentation entry sysfs-bus-iio-ina2xx-adc Documentation for attributes: * in_allow_async_readout * in_shunt_resistor Signed-off-by: Marc Titinger Signed-off-by: Jonathan Cameron --- Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc new file mode 100644 index 000000000000..8916f7ec6507 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc @@ -0,0 +1,24 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_allow_async_readout +Date: December 2015 +KernelVersion: 4.4 +Contact: linux-iio@vger.kernel.org +Description: + By default (value '0'), the capture thread checks for the Conversion + Ready Flag to being set prior to committing a new value to the sample + buffer. This synchronizes the in-chip conversion rate with the + in-driver readout rate at the cost of an additional register read. + + Writing '1' will remove the polling for the Conversion Ready Flags to + save the additional i2c transaction, which will improve the bandwidth + available for reading data. However, samples can be occasionally skipped + or repeated, depending on the beat between the capture and conversion + rates. + +What: /sys/bus/iio/devices/iio:deviceX/in_shunt_resistor +Date: December 2015 +KernelVersion: 4.4 +Contact: linux-iio@vger.kernel.org +Description: + The value of the shunt resistor may be known only at runtime fom an + eeprom content read by a client application. This attribute allows to + set its value in ohms. -- cgit v1.2.3 From f3b5a8d9b50d71b8c9fb72aa9c8ea948ad1a4ef9 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 30 Nov 2015 10:44:30 +0900 Subject: phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver This patch adds support for R-Car generation 3 USB2 PHY driver. This SoC has 3 EHCI/OHCI channels, and the channel 0 is shared with the HSUSB (USB2.0 peripheral) device. And each channel has independent registers about the PHYs. So, the purpose of this driver is: 1) initializes some registers of SoC specific to use the {ehci,ohci}-platform driver. 2) detects id pin to select host or peripheral on the channel 0. For now, this driver only supports 1) above. Signed-off-by: Yoshihiro Shimoda Acked-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 37 ++++ drivers/phy/Kconfig | 7 + drivers/phy/Makefile | 1 + drivers/phy/phy-rcar-gen3-usb2.c | 217 +++++++++++++++++++++ 4 files changed, 262 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt create mode 100644 drivers/phy/phy-rcar-gen3-usb2.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt new file mode 100644 index 000000000000..affa0f72658b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -0,0 +1,37 @@ +* Renesas R-Car generation 3 USB 2.0 PHY + +This file provides information on what the device node for the R-Car generation +3 USB 2.0 PHY contains. + +Required properties: +- compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795 + SoC. +- reg: offset and length of the partial USB 2.0 Host register block. +- reg-names: must be "usb2_host". +- clocks: clock phandle and specifier pair(s). +- #phy-cells: see phy-bindings.txt in the same directory, must be <0>. + +Optional properties: +To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are +combined, the device tree node should set HSUSB properties to reg and reg-names +properties. This is because HSUSB has registers to select USB 2.0 host or +peripheral at that channel: +- reg: offset and length of the partial HSUSB register block. +- reg-names: must be "hsusb". + +Example (R-Car H3): + + usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a7795"; + reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>; + reg-names = "usb2_host", "hsusb"; + clocks = <&mstp7_clks R8A7795_CLK_EHCI0>, + <&mstp7_clks R8A7795_CLK_HSUSB>; + }; + + usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a7795"; + reg = <0 0xee0a0200 0 0x700>; + reg-names = "usb2_host"; + clocks = <&mstp7_clks R8A7795_CLK_EHCI0>; + }; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 03cb3ea2d2c0..f90b7660dd3e 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -118,6 +118,13 @@ config PHY_RCAR_GEN2 help Support for USB PHY found on Renesas R-Car generation 2 SoCs. +config PHY_RCAR_GEN3_USB2 + tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" + depends on OF && ARCH_SHMOBILE + select GENERIC_PHY + help + Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. + config OMAP_CONTROL_PHY tristate "OMAP CONTROL PHY Driver" depends on ARCH_OMAP2PLUS || COMPILE_TEST diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 075db1a81aa5..91d7a62c6794 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o +obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c new file mode 100644 index 000000000000..269615228b1b --- /dev/null +++ b/drivers/phy/phy-rcar-gen3-usb2.c @@ -0,0 +1,217 @@ +/* + * Renesas R-Car Gen3 for USB2.0 PHY driver + * + * Copyright (C) 2015 Renesas Electronics Corporation + * + * This is based on the phy-rcar-gen2 driver: + * Copyright (C) 2014 Renesas Solutions Corp. + * Copyright (C) 2014 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +/******* USB2.0 Host registers (original offset is +0x200) *******/ +#define USB2_INT_ENABLE 0x000 +#define USB2_USBCTR 0x00c +#define USB2_SPD_RSM_TIMSET 0x10c +#define USB2_OC_TIMSET 0x110 + +/* INT_ENABLE */ +#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) +#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) +#define USB2_INT_ENABLE_INIT (USB2_INT_ENABLE_USBH_INTB_EN | \ + USB2_INT_ENABLE_USBH_INTA_EN) + +/* USBCTR */ +#define USB2_USBCTR_DIRPD BIT(2) +#define USB2_USBCTR_PLL_RST BIT(1) + +/* SPD_RSM_TIMSET */ +#define USB2_SPD_RSM_TIMSET_INIT 0x014e029b + +/* OC_TIMSET */ +#define USB2_OC_TIMSET_INIT 0x000209ab + +/******* HSUSB registers (original offset is +0x100) *******/ +#define HSUSB_LPSTS 0x02 +#define HSUSB_UGCTRL2 0x84 + +/* Low Power Status register (LPSTS) */ +#define HSUSB_LPSTS_SUSPM 0x4000 + +/* USB General control register 2 (UGCTRL2) */ +#define HSUSB_UGCTRL2_MASK 0x00000031 /* bit[31:6] should be 0 */ +#define HSUSB_UGCTRL2_USB0SEL 0x00000030 +#define HSUSB_UGCTRL2_USB0SEL_HOST 0x00000010 +#define HSUSB_UGCTRL2_USB0SEL_HS_USB 0x00000020 +#define HSUSB_UGCTRL2_USB0SEL_OTG 0x00000030 + +struct rcar_gen3_data { + void __iomem *base; + struct clk *clk; +}; + +struct rcar_gen3_chan { + struct rcar_gen3_data usb2; + struct rcar_gen3_data hsusb; + struct phy *phy; +}; + +static int rcar_gen3_phy_usb2_init(struct phy *p) +{ + struct rcar_gen3_chan *channel = phy_get_drvdata(p); + void __iomem *usb2_base = channel->usb2.base; + void __iomem *hsusb_base = channel->hsusb.base; + u32 val; + + /* Initialize USB2 part */ + writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE); + writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET); + writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET); + + /* Initialize HSUSB part */ + if (hsusb_base) { + /* TODO: support "OTG" mode */ + val = readl(hsusb_base + HSUSB_UGCTRL2); + val = (val & ~HSUSB_UGCTRL2_USB0SEL) | + HSUSB_UGCTRL2_USB0SEL_HOST; + writel(val & HSUSB_UGCTRL2_MASK, hsusb_base + HSUSB_UGCTRL2); + } + + return 0; +} + +static int rcar_gen3_phy_usb2_exit(struct phy *p) +{ + struct rcar_gen3_chan *channel = phy_get_drvdata(p); + + writel(0, channel->usb2.base + USB2_INT_ENABLE); + + return 0; +} + +static int rcar_gen3_phy_usb2_power_on(struct phy *p) +{ + struct rcar_gen3_chan *channel = phy_get_drvdata(p); + void __iomem *usb2_base = channel->usb2.base; + void __iomem *hsusb_base = channel->hsusb.base; + u32 val; + + val = readl(usb2_base + USB2_USBCTR); + val |= USB2_USBCTR_PLL_RST; + writel(val, usb2_base + USB2_USBCTR); + val &= ~USB2_USBCTR_PLL_RST; + writel(val, usb2_base + USB2_USBCTR); + + /* + * TODO: To reduce power consuming, this driver should set the SUSPM + * after the PHY detects ID pin as peripheral. + */ + if (hsusb_base) { + /* Power on HSUSB PHY */ + val = readw(hsusb_base + HSUSB_LPSTS); + val |= HSUSB_LPSTS_SUSPM; + writew(val, hsusb_base + HSUSB_LPSTS); + } + + return 0; +} + +static int rcar_gen3_phy_usb2_power_off(struct phy *p) +{ + struct rcar_gen3_chan *channel = phy_get_drvdata(p); + void __iomem *hsusb_base = channel->hsusb.base; + u32 val; + + if (hsusb_base) { + /* Power off HSUSB PHY */ + val = readw(hsusb_base + HSUSB_LPSTS); + val &= ~HSUSB_LPSTS_SUSPM; + writew(val, hsusb_base + HSUSB_LPSTS); + } + + return 0; +} + +static struct phy_ops rcar_gen3_phy_usb2_ops = { + .init = rcar_gen3_phy_usb2_init, + .exit = rcar_gen3_phy_usb2_exit, + .power_on = rcar_gen3_phy_usb2_power_on, + .power_off = rcar_gen3_phy_usb2_power_off, + .owner = THIS_MODULE, +}; + +static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { + { .compatible = "renesas,usb2-phy-r8a7795" }, + { } +}; +MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table); + +static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rcar_gen3_chan *channel; + struct phy_provider *provider; + struct resource *res; + + if (!dev->of_node) { + dev_err(dev, "This driver needs device tree\n"); + return -EINVAL; + } + + channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL); + if (!channel) + return -ENOMEM; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2_host"); + channel->usb2.base = devm_ioremap_resource(dev, res); + if (IS_ERR(channel->usb2.base)) + return PTR_ERR(channel->usb2.base); + + /* "hsusb" memory resource is optional */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hsusb"); + + /* To avoid error message by devm_ioremap_resource() */ + if (res) { + channel->hsusb.base = devm_ioremap_resource(dev, res); + if (IS_ERR(channel->hsusb.base)) + channel->hsusb.base = NULL; + } + + /* devm_phy_create() will call pm_runtime_enable(dev); */ + channel->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb2_ops); + if (IS_ERR(channel->phy)) { + dev_err(dev, "Failed to create USB2 PHY\n"); + return PTR_ERR(channel->phy); + } + + phy_set_drvdata(channel->phy, channel); + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(provider)) + dev_err(dev, "Failed to register PHY provider\n"); + + return PTR_ERR_OR_ZERO(provider); +} + +static struct platform_driver rcar_gen3_phy_usb2_driver = { + .driver = { + .name = "phy_rcar_gen3_usb2", + .of_match_table = rcar_gen3_phy_usb2_match_table, + }, + .probe = rcar_gen3_phy_usb2_probe, +}; +module_platform_driver(rcar_gen3_phy_usb2_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 2.0 PHY"); +MODULE_AUTHOR("Yoshihiro Shimoda "); -- cgit v1.2.3 From 9f391c574efc15f00a6c7e3e120c8b84fc9e792f Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 30 Nov 2015 10:44:32 +0900 Subject: phy: rcar-gen3-usb2: add runtime ID/VBUS pin detection This patch adds support for runtime ID/VBUS pin detection if the channel 0 of R-Car gen3 is used. So, we are able to use the channel as both host and peripheral. Signed-off-by: Yoshihiro Shimoda Acked-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 + drivers/phy/phy-rcar-gen3-usb2.c | 43 +++++++++++++++++++++- 2 files changed, 44 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index affa0f72658b..2390e4e9c84c 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -18,6 +18,7 @@ properties. This is because HSUSB has registers to select USB 2.0 host or peripheral at that channel: - reg: offset and length of the partial HSUSB register block. - reg-names: must be "hsusb". +- interrupts: interrupt specifier for the PHY. Example (R-Car H3): @@ -25,6 +26,7 @@ Example (R-Car H3): compatible = "renesas,usb2-phy-r8a7795"; reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>; reg-names = "usb2_host", "hsusb"; + interrupts = ; clocks = <&mstp7_clks R8A7795_CLK_EHCI0>, <&mstp7_clks R8A7795_CLK_HSUSB>; }; diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c index 2b5d890554ad..ef332ef4abc7 100644 --- a/drivers/phy/phy-rcar-gen3-usb2.c +++ b/drivers/phy/phy-rcar-gen3-usb2.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include @@ -25,14 +26,18 @@ #define USB2_SPD_RSM_TIMSET 0x10c #define USB2_OC_TIMSET 0x110 #define USB2_COMMCTRL 0x600 +#define USB2_OBINTSTA 0x604 +#define USB2_OBINTEN 0x608 #define USB2_VBCTRL 0x60c #define USB2_LINECTRL1 0x610 #define USB2_ADPCTRL 0x630 /* INT_ENABLE */ +#define USB2_INT_ENABLE_UCOM_INTEN BIT(3) #define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) #define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) -#define USB2_INT_ENABLE_INIT (USB2_INT_ENABLE_USBH_INTB_EN | \ +#define USB2_INT_ENABLE_INIT (USB2_INT_ENABLE_UCOM_INTEN | \ + USB2_INT_ENABLE_USBH_INTB_EN | \ USB2_INT_ENABLE_USBH_INTA_EN) /* USBCTR */ @@ -48,6 +53,12 @@ /* COMMCTRL */ #define USB2_COMMCTRL_OTG_PERI BIT(31) /* 1 = Peripheral mode */ +/* OBINTSTA and OBINTEN */ +#define USB2_OBINT_SESSVLDCHG BIT(12) +#define USB2_OBINT_IDDIGCHG BIT(11) +#define USB2_OBINT_BITS (USB2_OBINT_SESSVLDCHG | \ + USB2_OBINT_IDDIGCHG) + /* VBCTRL */ #define USB2_VBCTRL_DRVVBUSSEL BIT(8) @@ -174,6 +185,9 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) val = readl(usb2_base + USB2_VBCTRL); writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL); + writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA); + val = readl(usb2_base + USB2_OBINTEN); + writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN); val = readl(usb2_base + USB2_ADPCTRL); writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL); val = readl(usb2_base + USB2_LINECTRL1); @@ -270,6 +284,23 @@ static struct phy_ops rcar_gen3_phy_usb2_ops = { .owner = THIS_MODULE, }; +static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) +{ + struct rcar_gen3_chan *ch = _ch; + void __iomem *usb2_base = ch->usb2.base; + u32 status = readl(usb2_base + USB2_OBINTSTA); + irqreturn_t ret = IRQ_NONE; + + if (status & USB2_OBINT_BITS) { + dev_vdbg(&ch->phy->dev, "%s: %08x\n", __func__, status); + writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA); + rcar_gen3_device_recognition(ch); + ret = IRQ_HANDLED; + } + + return ret; +} + static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { { .compatible = "renesas,usb2-phy-r8a7795" }, { } @@ -302,9 +333,19 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) /* To avoid error message by devm_ioremap_resource() */ if (res) { + int irq; + channel->hsusb.base = devm_ioremap_resource(dev, res); if (IS_ERR(channel->hsusb.base)) channel->hsusb.base = NULL; + /* call request_irq for OTG */ + irq = platform_get_irq(pdev, 0); + if (irq >= 0) + irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq, + IRQF_SHARED, dev_name(dev), + channel); + if (irq < 0) + dev_err(dev, "No irq handler (%d)\n", irq); } /* devm_phy_create() will call pm_runtime_enable(dev); */ -- cgit v1.2.3 From 626a630e003c10c800a816cb994b3f9e505a88a9 Mon Sep 17 00:00:00 2001 From: Reinder de Haan Date: Fri, 11 Dec 2015 16:32:18 +0100 Subject: phy-sun4i-usb: Add support for the host usb-phys found on the H3 SoC Note this commit only adds support for phys 1-3, phy 0, the otg phy, is not yet (fully) supported after this commit. Signed-off-by: Reinder de Haan Signed-off-by: Hans de Goede Acked-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/sun4i-usb-phy.txt | 1 + drivers/phy/phy-sun4i-usb.c | 41 +++++++++++++++++----- 2 files changed, 33 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index 0cebf7454517..95736d77fbb7 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -9,6 +9,7 @@ Required properties: * allwinner,sun7i-a20-usb-phy * allwinner,sun8i-a23-usb-phy * allwinner,sun8i-a33-usb-phy + * allwinner,sun8i-h3-usb-phy - reg : a list of offset + length pairs - reg-names : * "phy_ctrl" diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 35b1fa3b71fe..bae54f7a1f48 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -47,6 +47,9 @@ #define REG_PHYBIST 0x08 #define REG_PHYTUNE 0x0c #define REG_PHYCTL_A33 0x10 +#define REG_PHY_UNK_H3 0x20 + +#define REG_PMU_UNK_H3 0x10 #define PHYCTL_DATA BIT(7) @@ -80,7 +83,7 @@ #define PHY_DISCON_TH_SEL 0x2a #define PHY_SQUELCH_DETECT 0x3c -#define MAX_PHYS 3 +#define MAX_PHYS 4 /* * Note do not raise the debounce time, we must report Vusb high within 100ms @@ -92,6 +95,7 @@ enum sun4i_usb_phy_type { sun4i_a10_phy, sun8i_a33_phy, + sun8i_h3_phy, }; struct sun4i_usb_phy_cfg { @@ -239,6 +243,7 @@ static int sun4i_usb_phy_init(struct phy *_phy) struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); int ret; + u32 val; ret = clk_prepare_enable(phy->clk); if (ret) @@ -250,16 +255,26 @@ static int sun4i_usb_phy_init(struct phy *_phy) return ret; } - /* Enable USB 45 Ohm resistor calibration */ - if (phy->index == 0) - sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1); + if (data->cfg->type == sun8i_h3_phy) { + if (phy->index == 0) { + val = readl(data->base + REG_PHY_UNK_H3); + writel(val & ~1, data->base + REG_PHY_UNK_H3); + } + + val = readl(phy->pmu + REG_PMU_UNK_H3); + writel(val & ~2, phy->pmu + REG_PMU_UNK_H3); + } else { + /* Enable USB 45 Ohm resistor calibration */ + if (phy->index == 0) + sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1); - /* Adjust PHY's magnitude and rate */ - sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); + /* Adjust PHY's magnitude and rate */ + sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); - /* Disconnect threshold adjustment */ - sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, - data->cfg->disc_thresh, 2); + /* Disconnect threshold adjustment */ + sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, + data->cfg->disc_thresh, 2); + } sun4i_usb_phy_passby(phy, 1); @@ -726,6 +741,13 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = { .dedicated_clocks = true, }; +static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { + .num_phys = 4, + .type = sun8i_h3_phy, + .disc_thresh = 3, + .dedicated_clocks = true, +}; + static const struct of_device_id sun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg }, { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg }, @@ -733,6 +755,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg }, { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg }, { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg }, + { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg }, { }, }; MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); -- cgit v1.2.3 From 30e9a0b2147c8405109ad98ae670829dd92e4516 Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Mon, 23 Nov 2015 11:46:27 +0800 Subject: phy: add phy-hi6220-usb Support hi6220 use phy for HiKey board Acked-by: Rob Herring Signed-off-by: Zhangfei Gao Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/phy-hi6220-usb.txt | 16 ++ drivers/phy/Kconfig | 9 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-hi6220-usb.c | 168 +++++++++++++++++++++ 4 files changed, 194 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt create mode 100644 drivers/phy/phy-hi6220-usb.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt b/Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt new file mode 100644 index 000000000000..f17a56e2152f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt @@ -0,0 +1,16 @@ +Hisilicon hi6220 usb PHY +----------------------- + +Required properties: +- compatible: should be "hisilicon,hi6220-usb-phy" +- #phy-cells: must be 0 +- hisilicon,peripheral-syscon: phandle of syscon used to control phy. +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + usb_phy: usbphy { + compatible = "hisilicon,hi6220-usb-phy"; + #phy-cells = <0>; + phy-supply = <&fixed_5v_hub>; + hisilicon,peripheral-syscon = <&sys_ctrl>; + }; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index f90b7660dd3e..90eec60d7ba5 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -222,6 +222,15 @@ config PHY_MT65XX_USB3 for mt65xx SoCs. it supports two usb2.0 ports and one usb3.0 port. +config PHY_HI6220_USB + tristate "hi6220 USB PHY support" + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the HISILICON HI6220 USB PHY. + + To compile this driver as a module, choose M here. + config PHY_SUN4I_USB tristate "Allwinner sunxi SoC USB PHY driver" depends on ARCH_SUNXI && HAS_IOMEM && OF diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 91d7a62c6794..c80f09df3bb8 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o +obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o diff --git a/drivers/phy/phy-hi6220-usb.c b/drivers/phy/phy-hi6220-usb.c new file mode 100644 index 000000000000..b2141cbd4cf6 --- /dev/null +++ b/drivers/phy/phy-hi6220-usb.c @@ -0,0 +1,168 @@ +/* + * Copyright (c) 2015 Linaro Ltd. + * Copyright (c) 2015 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#define SC_PERIPH_CTRL4 0x00c + +#define CTRL4_PICO_SIDDQ BIT(6) +#define CTRL4_PICO_OGDISABLE BIT(8) +#define CTRL4_PICO_VBUSVLDEXT BIT(10) +#define CTRL4_PICO_VBUSVLDEXTSEL BIT(11) +#define CTRL4_OTG_PHY_SEL BIT(21) + +#define SC_PERIPH_CTRL5 0x010 + +#define CTRL5_USBOTG_RES_SEL BIT(3) +#define CTRL5_PICOPHY_ACAENB BIT(4) +#define CTRL5_PICOPHY_BC_MODE BIT(5) +#define CTRL5_PICOPHY_CHRGSEL BIT(6) +#define CTRL5_PICOPHY_VDATSRCEND BIT(7) +#define CTRL5_PICOPHY_VDATDETENB BIT(8) +#define CTRL5_PICOPHY_DCDENB BIT(9) +#define CTRL5_PICOPHY_IDDIG BIT(10) + +#define SC_PERIPH_CTRL8 0x018 +#define SC_PERIPH_RSTEN0 0x300 +#define SC_PERIPH_RSTDIS0 0x304 + +#define RST0_USBOTG_BUS BIT(4) +#define RST0_POR_PICOPHY BIT(5) +#define RST0_USBOTG BIT(6) +#define RST0_USBOTG_32K BIT(7) + +#define EYE_PATTERN_PARA 0x7053348c + +struct hi6220_priv { + struct regmap *reg; + struct device *dev; +}; + +static void hi6220_phy_init(struct hi6220_priv *priv) +{ + struct regmap *reg = priv->reg; + u32 val, mask; + + val = RST0_USBOTG_BUS | RST0_POR_PICOPHY | + RST0_USBOTG | RST0_USBOTG_32K; + mask = val; + regmap_update_bits(reg, SC_PERIPH_RSTEN0, mask, val); + regmap_update_bits(reg, SC_PERIPH_RSTDIS0, mask, val); +} + +static int hi6220_phy_setup(struct hi6220_priv *priv, bool on) +{ + struct regmap *reg = priv->reg; + u32 val, mask; + int ret; + + if (on) { + val = CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB; + mask = val | CTRL5_PICOPHY_BC_MODE; + ret = regmap_update_bits(reg, SC_PERIPH_CTRL5, mask, val); + if (ret) + goto out; + + val = CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL | + CTRL4_OTG_PHY_SEL; + mask = val | CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE; + ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val); + if (ret) + goto out; + + ret = regmap_write(reg, SC_PERIPH_CTRL8, EYE_PATTERN_PARA); + if (ret) + goto out; + } else { + val = CTRL4_PICO_SIDDQ; + mask = val; + ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val); + if (ret) + goto out; + } + + return 0; +out: + dev_err(priv->dev, "failed to setup phy ret: %d\n", ret); + return ret; +} + +static int hi6220_phy_start(struct phy *phy) +{ + struct hi6220_priv *priv = phy_get_drvdata(phy); + + return hi6220_phy_setup(priv, true); +} + +static int hi6220_phy_exit(struct phy *phy) +{ + struct hi6220_priv *priv = phy_get_drvdata(phy); + + return hi6220_phy_setup(priv, false); +} + +static struct phy_ops hi6220_phy_ops = { + .init = hi6220_phy_start, + .exit = hi6220_phy_exit, + .owner = THIS_MODULE, +}; + +static int hi6220_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct phy *phy; + struct hi6220_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + priv->reg = syscon_regmap_lookup_by_phandle(dev->of_node, + "hisilicon,peripheral-syscon"); + if (IS_ERR(priv->reg)) { + dev_err(dev, "no hisilicon,peripheral-syscon\n"); + return PTR_ERR(priv->reg); + } + + hi6220_phy_init(priv); + + phy = devm_phy_create(dev, NULL, &hi6220_phy_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + phy_set_drvdata(phy, priv); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id hi6220_phy_of_match[] = { + {.compatible = "hisilicon,hi6220-usb-phy",}, + { }, +}; +MODULE_DEVICE_TABLE(of, hi6220_phy_of_match); + +static struct platform_driver hi6220_phy_driver = { + .probe = hi6220_phy_probe, + .driver = { + .name = "hi6220-usb-phy", + .of_match_table = hi6220_phy_of_match, + } +}; +module_platform_driver(hi6220_phy_driver); + +MODULE_DESCRIPTION("HISILICON HI6220 USB PHY driver"); +MODULE_ALIAS("platform:hi6220-usb-phy"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From c2bfc3b88813ab8711317a19f5c9cd74aeaf536c Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 19 Nov 2015 22:22:25 +0100 Subject: phy: rockchip-usb: add compatible values for rk3066a and rk3188 We need custom handling for these two socs in the driver shortly, so add the necessary compatible values to binding and driver. Signed-off-by: Heiko Stuebner Signed-off-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt | 5 ++++- drivers/phy/phy-rockchip-usb.c | 2 ++ 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt index 826454ac43bb..9b37242fb8d3 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt @@ -1,7 +1,10 @@ ROCKCHIP USB2 PHY Required properties: - - compatible: rockchip,rk3288-usb-phy + - compatible: matching the soc type, one of + "rockchip,rk3066a-usb-phy" + "rockchip,rk3188-usb-phy" + "rockchip,rk3288-usb-phy" - rockchip,grf : phandle to the syscon managing the "general register files" - #address-cells: should be 1 diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c index ff3ac3379c61..16cd533b21f0 100644 --- a/drivers/phy/phy-rockchip-usb.c +++ b/drivers/phy/phy-rockchip-usb.c @@ -176,6 +176,8 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev) } static const struct of_device_id rockchip_usb_phy_dt_ids[] = { + { .compatible = "rockchip,rk3066a-usb-phy" }, + { .compatible = "rockchip,rk3188-usb-phy" }, { .compatible = "rockchip,rk3288-usb-phy" }, {} }; -- cgit v1.2.3 From b74fe7c7617fd267c10d53e525984df81a5f317f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 19 Nov 2015 22:22:26 +0100 Subject: phy: rockchip-usb: expose the phy-internal PLLs The USB phys on Rockchip SoCs contain their own internal PLLs to create the 480MHz needed. Additionally this PLL output is also fed back into the core clock-controller as possible source for clocks like the GPU or others. Until now this was modelled incorrectly with a "virtual" factor clock in the clock controller. The one big caveat is that if we turn off the usb phy via the siddq signal, all analog components get turned off, including the PLLs. It is therefore possible that a source clock gets disabled without the clock driver ever knowing, possibly making the system hang. Therefore register the phy-plls as real clocks that the clock driver can then reference again normally, making the clock hirarchy finally reflect the actual hardware. The phy-ops get converted to simply turning that new clock on and off which in turn controls the siddq signal of the phy. Through this the driver gains handling for platform-specific data, to handle the phy->clock name association. Signed-off-by: Heiko Stuebner Reviewed-by: Douglas Anderson Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/rockchip-usb-phy.txt | 1 + drivers/phy/phy-rockchip-usb.c | 188 ++++++++++++++++++--- 2 files changed, 162 insertions(+), 27 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt index 9b37242fb8d3..68498d560354 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt @@ -24,6 +24,7 @@ required properties: Optional Properties: - clocks : phandle + clock specifier for the phy clocks - clock-names: string, clock name, must be "phyclk" +- #clock-cells: for users of the phy-pll, should be 0 Example: diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c index 16cd533b21f0..33a80eba1cb4 100644 --- a/drivers/phy/phy-rockchip-usb.c +++ b/drivers/phy/phy-rockchip-usb.c @@ -15,12 +15,14 @@ */ #include +#include #include #include #include #include #include #include +#include #include #include #include @@ -36,15 +38,28 @@ #define SIDDQ_ON BIT(13) #define SIDDQ_OFF (0 << 13) +struct rockchip_usb_phys { + int reg; + const char *pll_name; +}; + +struct rockchip_usb_phy_pdata { + struct rockchip_usb_phys *phys; +}; + struct rockchip_usb_phy_base { struct device *dev; struct regmap *reg_base; + const struct rockchip_usb_phy_pdata *pdata; }; struct rockchip_usb_phy { struct rockchip_usb_phy_base *base; + struct device_node *np; unsigned int reg_offset; struct clk *clk; + struct clk *clk480m; + struct clk_hw clk480m_hw; struct phy *phy; }; @@ -55,17 +70,59 @@ static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy, SIDDQ_WRITE_ENA | (siddq ? SIDDQ_ON : SIDDQ_OFF)); } -static int rockchip_usb_phy_power_off(struct phy *_phy) +static unsigned long rockchip_usb_phy480m_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) { - struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); - int ret = 0; + return 480000000; +} + +static void rockchip_usb_phy480m_disable(struct clk_hw *hw) +{ + struct rockchip_usb_phy *phy = container_of(hw, + struct rockchip_usb_phy, + clk480m_hw); /* Power down usb phy analog blocks by set siddq 1 */ - ret = rockchip_usb_phy_power(phy, 1); - if (ret) + rockchip_usb_phy_power(phy, 1); +} + +static int rockchip_usb_phy480m_enable(struct clk_hw *hw) +{ + struct rockchip_usb_phy *phy = container_of(hw, + struct rockchip_usb_phy, + clk480m_hw); + + /* Power up usb phy analog blocks by set siddq 0 */ + return rockchip_usb_phy_power(phy, 0); +} + +static int rockchip_usb_phy480m_is_enabled(struct clk_hw *hw) +{ + struct rockchip_usb_phy *phy = container_of(hw, + struct rockchip_usb_phy, + clk480m_hw); + int ret; + u32 val; + + ret = regmap_read(phy->base->reg_base, phy->reg_offset, &val); + if (ret < 0) return ret; - clk_disable_unprepare(phy->clk); + return (val & SIDDQ_ON) ? 0 : 1; +} + +static const struct clk_ops rockchip_usb_phy480m_ops = { + .enable = rockchip_usb_phy480m_enable, + .disable = rockchip_usb_phy480m_disable, + .is_enabled = rockchip_usb_phy480m_is_enabled, + .recalc_rate = rockchip_usb_phy480m_recalc_rate, +}; + +static int rockchip_usb_phy_power_off(struct phy *_phy) +{ + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); + + clk_disable_unprepare(phy->clk480m); return 0; } @@ -73,20 +130,8 @@ static int rockchip_usb_phy_power_off(struct phy *_phy) static int rockchip_usb_phy_power_on(struct phy *_phy) { struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); - int ret = 0; - ret = clk_prepare_enable(phy->clk); - if (ret) - return ret; - - /* Power up usb phy analog blocks by set siddq 0 */ - ret = rockchip_usb_phy_power(phy, 0); - if (ret) { - clk_disable_unprepare(phy->clk); - return ret; - } - - return 0; + return clk_prepare_enable(phy->clk480m); } static const struct phy_ops ops = { @@ -99,6 +144,9 @@ static void rockchip_usb_phy_action(void *data) { struct rockchip_usb_phy *rk_phy = data; + of_clk_del_provider(rk_phy->np); + clk_unregister(rk_phy->clk480m); + if (rk_phy->clk) clk_put(rk_phy->clk); } @@ -108,13 +156,16 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base, { struct rockchip_usb_phy *rk_phy; unsigned int reg_offset; - int err; + const char *clk_name; + struct clk_init_data init; + int err, i; rk_phy = devm_kzalloc(base->dev, sizeof(*rk_phy), GFP_KERNEL); if (!rk_phy) return -ENOMEM; rk_phy->base = base; + rk_phy->np = child; if (of_property_read_u32(child, "reg", ®_offset)) { dev_err(base->dev, "missing reg property in node %s\n", @@ -124,14 +175,54 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base, rk_phy->reg_offset = reg_offset; - err = devm_add_action(base->dev, rockchip_usb_phy_action, rk_phy); - if (err) - return err; - rk_phy->clk = of_clk_get_by_name(child, "phyclk"); if (IS_ERR(rk_phy->clk)) rk_phy->clk = NULL; + i = 0; + init.name = NULL; + while (base->pdata->phys[i].reg) { + if (base->pdata->phys[i].reg == reg_offset) { + init.name = base->pdata->phys[i].pll_name; + break; + } + i++; + } + + if (!init.name) { + dev_err(base->dev, "phy data not found\n"); + return -EINVAL; + } + + if (rk_phy->clk) { + clk_name = __clk_get_name(rk_phy->clk); + init.flags = 0; + init.parent_names = &clk_name; + init.num_parents = 1; + } else { + init.flags = CLK_IS_ROOT; + init.parent_names = NULL; + init.num_parents = 0; + } + + init.ops = &rockchip_usb_phy480m_ops; + rk_phy->clk480m_hw.init = &init; + + rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw); + if (IS_ERR(rk_phy->clk480m)) { + err = PTR_ERR(rk_phy->clk480m); + goto err_clk; + } + + err = of_clk_add_provider(child, of_clk_src_simple_get, + rk_phy->clk480m); + if (err < 0) + goto err_clk_prov; + + err = devm_add_action(base->dev, rockchip_usb_phy_action, rk_phy); + if (err) + goto err_devm_action; + rk_phy->phy = devm_phy_create(base->dev, child, &ops); if (IS_ERR(rk_phy->phy)) { dev_err(base->dev, "failed to create PHY\n"); @@ -141,13 +232,48 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base, /* only power up usb phy when it use, so disable it when init*/ return rockchip_usb_phy_power(rk_phy, 1); + +err_devm_action: + of_clk_del_provider(child); +err_clk_prov: + clk_unregister(rk_phy->clk480m); +err_clk: + if (rk_phy->clk) + clk_put(rk_phy->clk); + return err; } +static const struct rockchip_usb_phy_pdata rk3066a_pdata = { + .phys = (struct rockchip_usb_phys[]){ + { .reg = 0x17c, .pll_name = "sclk_otgphy0_480m" }, + { .reg = 0x188, .pll_name = "sclk_otgphy1_480m" }, + { /* sentinel */ } + }, +}; + +static const struct rockchip_usb_phy_pdata rk3188_pdata = { + .phys = (struct rockchip_usb_phys[]){ + { .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" }, + { .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" }, + { /* sentinel */ } + }, +}; + +static const struct rockchip_usb_phy_pdata rk3288_pdata = { + .phys = (struct rockchip_usb_phys[]){ + { .reg = 0x320, .pll_name = "sclk_otgphy0_480m" }, + { .reg = 0x334, .pll_name = "sclk_otgphy1_480m" }, + { .reg = 0x348, .pll_name = "sclk_otgphy2_480m" }, + { /* sentinel */ } + }, +}; + static int rockchip_usb_phy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct rockchip_usb_phy_base *phy_base; struct phy_provider *phy_provider; + const struct of_device_id *match; struct device_node *child; int err; @@ -155,6 +281,14 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev) if (!phy_base) return -ENOMEM; + match = of_match_device(dev->driver->of_match_table, dev); + if (!match || !match->data) { + dev_err(dev, "missing phy data\n"); + return -EINVAL; + } + + phy_base->pdata = match->data; + phy_base->dev = dev; phy_base->reg_base = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf"); @@ -176,9 +310,9 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev) } static const struct of_device_id rockchip_usb_phy_dt_ids[] = { - { .compatible = "rockchip,rk3066a-usb-phy" }, - { .compatible = "rockchip,rk3188-usb-phy" }, - { .compatible = "rockchip,rk3288-usb-phy" }, + { .compatible = "rockchip,rk3066a-usb-phy", .data = &rk3066a_pdata }, + { .compatible = "rockchip,rk3188-usb-phy", .data = &rk3188_pdata }, + { .compatible = "rockchip,rk3288-usb-phy", .data = &rk3288_pdata }, {} }; -- cgit v1.2.3 From c1602a1a0fbe12ab8e67deedf32e5a85f8553a07 Mon Sep 17 00:00:00 2001 From: Jaedon Shin Date: Thu, 26 Nov 2015 11:56:35 +0900 Subject: phy: phy_brcmstb_sata: add support for MIPS-based platforms The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware block for AHCI SATA3. This new compatible string, "brcm,bcm7425-sata-phy", may be used for most MIPS-based platforms of 40nm process technology. Signed-off-by: Jaedon Shin Acked-by: Rob Herring Tested-by: Florian Fainelli Acked-by: Brian Norris Signed-off-by: Kishon Vijay Abraham I --- .../bindings/phy/brcm,brcmstb-sata-phy.txt | 1 + drivers/phy/Kconfig | 4 ++-- drivers/phy/phy-brcmstb-sata.c | 24 ++++++++++++++++------ 3 files changed, 21 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt index 7f81ef90146a..d87ab7c127b8 100644 --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt @@ -2,6 +2,7 @@ Required properties: - compatible: should be one or more of + "brcm,bcm7425-sata-phy" "brcm,bcm7445-sata-phy" "brcm,phy-sata3" - address-cells: should be 1 diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 90eec60d7ba5..e7e117d5dbbe 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -390,11 +390,11 @@ config PHY_TUSB1210 config PHY_BRCMSTB_SATA tristate "Broadcom STB SATA PHY driver" - depends on ARCH_BRCMSTB + depends on ARCH_BRCMSTB || BMIPS_GENERIC depends on OF select GENERIC_PHY help - Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs. + Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs. Likely useful only with CONFIG_SATA_BRCMSTB enabled. config PHY_CYGNUS_PCIE diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c index 555fb2de11d4..a23172ff40e3 100644 --- a/drivers/phy/phy-brcmstb-sata.c +++ b/drivers/phy/phy-brcmstb-sata.c @@ -32,8 +32,14 @@ /* Register offset between PHYs in PCB space */ #define SATA_MDIO_REG_28NM_SPACE_SIZE 0x1000 +/* The older SATA PHY registers duplicated per port registers within the map, + * rather than having a separate map per port. + */ +#define SATA_MDIO_REG_40NM_SPACE_SIZE 0x10 + enum brcm_sata_phy_version { BRCM_SATA_PHY_28NM, + BRCM_SATA_PHY_40NM, }; struct brcm_sata_port { @@ -51,7 +57,7 @@ struct brcm_sata_phy { struct brcm_sata_port phys[MAX_PORTS]; }; -enum sata_mdio_phy_regs_28nm { +enum sata_mdio_phy_regs { PLL_REG_BANK_0 = 0x50, PLL_REG_BANK_0_PLLCONTROL_0 = 0x81, @@ -69,10 +75,14 @@ enum sata_mdio_phy_regs_28nm { static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port) { struct brcm_sata_phy *priv = port->phy_priv; - u32 offset; + u32 offset = 0; if (priv->version == BRCM_SATA_PHY_28NM) offset = SATA_MDIO_REG_28NM_SPACE_SIZE; + else if (priv->version == BRCM_SATA_PHY_40NM) + offset = SATA_MDIO_REG_40NM_SPACE_SIZE; + else + dev_err(priv->dev, "invalid phy version\n"); return priv->phy_base + (port->portnum * offset); } @@ -93,7 +103,7 @@ static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs, #define FMAX_VAL_DEFAULT 0x3df #define FMAX_VAL_SSC 0x83 -static void brcm_sata_cfg_ssc_28nm(struct brcm_sata_port *port) +static void brcm_sata_cfg_ssc(struct brcm_sata_port *port) { void __iomem *base = brcm_sata_phy_base(port); struct brcm_sata_phy *priv = port->phy_priv; @@ -124,12 +134,12 @@ static int brcm_sata_phy_init(struct phy *phy) { struct brcm_sata_port *port = phy_get_drvdata(phy); - brcm_sata_cfg_ssc_28nm(port); + brcm_sata_cfg_ssc(port); return 0; } -static const struct phy_ops phy_ops_28nm = { +static const struct phy_ops phy_ops = { .init = brcm_sata_phy_init, .owner = THIS_MODULE, }; @@ -137,6 +147,8 @@ static const struct phy_ops phy_ops_28nm = { static const struct of_device_id brcm_sata_phy_of_match[] = { { .compatible = "brcm,bcm7445-sata-phy", .data = (void *)BRCM_SATA_PHY_28NM }, + { .compatible = "brcm,bcm7425-sata-phy", + .data = (void *)BRCM_SATA_PHY_40NM }, {}, }; MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match); @@ -196,7 +208,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev) port = &priv->phys[id]; port->portnum = id; port->phy_priv = priv; - port->phy = devm_phy_create(dev, child, &phy_ops_28nm); + port->phy = devm_phy_create(dev, child, &phy_ops); port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc"); if (IS_ERR(port->phy)) { dev_err(dev, "failed to create PHY\n"); -- cgit v1.2.3 From 08a0a4f987a4b5827e4111eccc97a9271d24633e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 19 Dec 2015 08:17:41 +0900 Subject: extcon: add Maxim MAX3355 driver Maxim Integrated MAX3355E chip integrates a charge pump and comparators to enable a system with an integrated USB OTG dual-role transceiver to function as an USB OTG dual-role device. In addition to sensing/controlling Vbus, the chip also passes thru the ID signal from the USB OTG connector. On some Renesas boards, this signal is just fed into the SoC thru a GPIO pin -- there's no real OTG controller, only host and gadget USB controllers sharing the same USB bus; however, we'd like to allow host or gadget drivers to be loaded depending on the cable type, hence the need for the MAX3355 extcon driver. The Vbus status signals are also wired to GPIOs (however, we aren't currently interested in them), the OFFVBUS# signal is controlled by the host controllers, there's also the SHDN# signal wired to a GPIO, it should be driven high for the normal operation. Signed-off-by: Sergei Shtylyov Acked-by: Chanwoo Choi Acked-by: Rob Herring [cw00.choi: Add the GPIOLIB dependency] Signed-off-by: Chanwoo Choi --- .../devicetree/bindings/extcon/extcon-max3355.txt | 21 +++ drivers/extcon/Kconfig | 9 ++ drivers/extcon/Makefile | 1 + drivers/extcon/extcon-max3355.c | 146 +++++++++++++++++++++ 4 files changed, 177 insertions(+) create mode 100644 Documentation/devicetree/bindings/extcon/extcon-max3355.txt create mode 100644 drivers/extcon/extcon-max3355.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/extcon/extcon-max3355.txt b/Documentation/devicetree/bindings/extcon/extcon-max3355.txt new file mode 100644 index 000000000000..f2288ea9eb82 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-max3355.txt @@ -0,0 +1,21 @@ +Maxim Integrated MAX3355 USB OTG chip +------------------------------------- + +MAX3355 integrates a charge pump and comparators to enable a system with an +integrated USB OTG dual-role transceiver to function as a USB OTG dual-role +device. + +Required properties: +- compatible: should be "maxim,max3355"; +- maxim,shdn-gpios: should contain a phandle and GPIO specifier for the GPIO pin + connected to the MAX3355's SHDN# pin; +- id-gpios: should contain a phandle and GPIO specifier for the GPIO pin + connected to the MAX3355's ID_OUT pin. + +Example: + + usb-otg { + compatible = "maxim,max3355"; + maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 0cebbf668886..3d89e60a3e71 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -52,6 +52,15 @@ config EXTCON_MAX14577 Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory detector and switch. +config EXTCON_MAX3355 + tristate "Maxim MAX3355 USB OTG EXTCON Support" + depends on GPIOLIB || COMPILE_TEST + help + If you say yes here you get support for the USB OTG role detection by + MAX3355. The MAX3355 chip integrates a charge pump and comparators to + enable a system with an integrated USB OTG dual-role transceiver to + function as an USB OTG dual-role device. + config EXTCON_MAX77693 tristate "Maxim MAX77693 EXTCON Support" depends on MFD_MAX77693 && INPUT diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index ba787d04295b..2a0e4f45d5b2 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o +obj-$(CONFIG_EXTCON_MAX3355) += extcon-max3355.o obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o obj-$(CONFIG_EXTCON_MAX77843) += extcon-max77843.o obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o diff --git a/drivers/extcon/extcon-max3355.c b/drivers/extcon/extcon-max3355.c new file mode 100644 index 000000000000..c24abec5d06c --- /dev/null +++ b/drivers/extcon/extcon-max3355.c @@ -0,0 +1,146 @@ +/* + * Maxim Integrated MAX3355 USB OTG chip extcon driver + * + * Copyright (C) 2014-2015 Cogent Embedded, Inc. + * Author: Sergei Shtylyov + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + */ + +#include +#include +#include +#include +#include +#include + +struct max3355_data { + struct extcon_dev *edev; + struct gpio_desc *id_gpiod; + struct gpio_desc *shdn_gpiod; +}; + +static const unsigned int max3355_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_NONE, +}; + +static irqreturn_t max3355_id_irq(int irq, void *dev_id) +{ + struct max3355_data *data = dev_id; + int id = gpiod_get_value_cansleep(data->id_gpiod); + + if (id) { + /* + * ID = 1 means USB HOST cable detached. + * As we don't have event for USB peripheral cable attached, + * we simulate USB peripheral attach here. + */ + extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, false); + extcon_set_cable_state_(data->edev, EXTCON_USB, true); + } else { + /* + * ID = 0 means USB HOST cable attached. + * As we don't have event for USB peripheral cable detached, + * we simulate USB peripheral detach here. + */ + extcon_set_cable_state_(data->edev, EXTCON_USB, false); + extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, true); + } + + return IRQ_HANDLED; +} + +static int max3355_probe(struct platform_device *pdev) +{ + struct max3355_data *data; + struct gpio_desc *gpiod; + int irq, err; + + data = devm_kzalloc(&pdev->dev, sizeof(struct max3355_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + gpiod = devm_gpiod_get(&pdev->dev, "id", GPIOD_IN); + if (IS_ERR(gpiod)) { + dev_err(&pdev->dev, "failed to get ID_OUT GPIO\n"); + return PTR_ERR(gpiod); + } + data->id_gpiod = gpiod; + + gpiod = devm_gpiod_get(&pdev->dev, "maxim,shdn", GPIOD_OUT_HIGH); + if (IS_ERR(gpiod)) { + dev_err(&pdev->dev, "failed to get SHDN# GPIO\n"); + return PTR_ERR(gpiod); + } + data->shdn_gpiod = gpiod; + + data->edev = devm_extcon_dev_allocate(&pdev->dev, max3355_cable); + if (IS_ERR(data->edev)) { + dev_err(&pdev->dev, "failed to allocate extcon device\n"); + return PTR_ERR(data->edev); + } + + err = devm_extcon_dev_register(&pdev->dev, data->edev); + if (err < 0) { + dev_err(&pdev->dev, "failed to register extcon device\n"); + return err; + } + + irq = gpiod_to_irq(data->id_gpiod); + if (irq < 0) { + dev_err(&pdev->dev, "failed to translate ID_OUT GPIO to IRQ\n"); + return irq; + } + + err = devm_request_threaded_irq(&pdev->dev, irq, NULL, max3355_id_irq, + IRQF_ONESHOT | IRQF_NO_SUSPEND | + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + pdev->name, data); + if (err < 0) { + dev_err(&pdev->dev, "failed to request ID_OUT IRQ\n"); + return err; + } + + platform_set_drvdata(pdev, data); + + /* Perform initial detection */ + max3355_id_irq(irq, data); + + return 0; +} + +static int max3355_remove(struct platform_device *pdev) +{ + struct max3355_data *data = platform_get_drvdata(pdev); + + gpiod_set_value_cansleep(data->shdn_gpiod, 0); + + return 0; +} + +static const struct of_device_id max3355_match_table[] = { + { .compatible = "maxim,max3355", }, + { } +}; +MODULE_DEVICE_TABLE(of, max3355_match_table); + +static struct platform_driver max3355_driver = { + .probe = max3355_probe, + .remove = max3355_remove, + .driver = { + .name = "extcon-max3355", + .of_match_table = max3355_match_table, + }, +}; + +module_platform_driver(max3355_driver); + +MODULE_AUTHOR("Sergei Shtylyov "); +MODULE_DESCRIPTION("Maxim MAX3355 extcon driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From c396a1c7ee1b3b460cf01824b03e0627a7db5b01 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 21 Dec 2015 14:24:10 +0530 Subject: phy: ti-pipe3: use *syscon* framework API to power on/off the PHY Deprecate using phy-omap-control driver to power on/off the PHY and use *syscon* framework to do the same. Signed-off-by: Kishon Vijay Abraham I Acked-by: Rob Herring --- Documentation/devicetree/bindings/phy/ti-phy.txt | 10 ++- drivers/phy/phy-ti-pipe3.c | 88 ++++++++++++++++++++---- 2 files changed, 81 insertions(+), 17 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 9cf9446eaf2e..e06f980fa2ba 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -77,8 +77,6 @@ Required properties: * "div-clk" - apll clock Optional properties: - - ctrl-module : phandle of the control module used by PHY driver to power on - the PHY. - id: If there are multiple instance of the same type, in order to differentiate between each instance "id" can be used (e.g., multi-lane PCIe PHY). If "id" is not provided, it is set to default value of '1'. @@ -86,6 +84,14 @@ Optional properties: CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0 register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy. +Deprecated properties: + - ctrl-module : phandle of the control module used by PHY driver to power on + the PHY. + +Recommended properies: + - syscon-phy-power : phandle/offset pair. Phandle to the system control + module and the register offset to power on/off the PHY. + This is usually a subnode of ocp2scp to which it is connected. usb3phy@4a084400 { diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index 0ce4194e09a5..a47b1902a36f 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -56,6 +56,15 @@ #define SATA_PLL_SOFT_RESET BIT(18) +#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000 +#define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14 + +#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000 +#define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 22 + +#define PIPE3_PHY_TX_RX_POWERON 0x3 +#define PIPE3_PHY_TX_RX_POWEROFF 0x0 + /* * This is an Empirical value that works, need to confirm the actual * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status @@ -86,8 +95,10 @@ struct ti_pipe3 { struct clk *refclk; struct clk *div_clk; struct pipe3_dpll_map *dpll_map; + struct regmap *phy_power_syscon; /* ctrl. reg. acces */ struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */ unsigned int dpll_reset_reg; /* reg. index within syscon */ + unsigned int power_reg; /* power reg. index within syscon */ bool sata_refclk_enabled; }; @@ -144,20 +155,49 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy); static int ti_pipe3_power_off(struct phy *x) { + u32 val; + int ret; struct ti_pipe3 *phy = phy_get_drvdata(x); - omap_control_phy_power(phy->control_dev, 0); + if (!phy->phy_power_syscon) { + omap_control_phy_power(phy->control_dev, 0); + return 0; + } - return 0; + val = PIPE3_PHY_TX_RX_POWEROFF << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; + + ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg, + PIPE3_PHY_PWRCTL_CLK_CMD_MASK, val); + return ret; } static int ti_pipe3_power_on(struct phy *x) { + u32 val; + u32 mask; + int ret; + unsigned long rate; struct ti_pipe3 *phy = phy_get_drvdata(x); - omap_control_phy_power(phy->control_dev, 1); + if (!phy->phy_power_syscon) { + omap_control_phy_power(phy->control_dev, 1); + return 0; + } - return 0; + rate = clk_get_rate(phy->sys_clk); + if (!rate) { + dev_err(phy->dev, "Invalid clock rate\n"); + return -EINVAL; + } + rate = rate / 1000000; + mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK; + val = PIPE3_PHY_TX_RX_POWERON << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; + val |= rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; + + ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg, + mask, val); + return ret; } static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy) @@ -334,7 +374,8 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy) phy->wkupclk = ERR_PTR(-ENODEV); } - if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { + if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie") || + phy->phy_power_syscon) { phy->sys_clk = devm_clk_get(dev, "sysclk"); if (IS_ERR(phy->sys_clk)) { dev_err(dev, "unable to get sysclk\n"); @@ -383,19 +424,36 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy) struct device_node *control_node; struct platform_device *control_pdev; - control_node = of_parse_phandle(node, "ctrl-module", 0); - if (!control_node) { - dev_err(dev, "Failed to get control device phandle\n"); - return -EINVAL; + phy->phy_power_syscon = syscon_regmap_lookup_by_phandle(node, + "syscon-phy-power"); + if (IS_ERR(phy->phy_power_syscon)) { + dev_dbg(dev, + "can't get syscon-phy-power, using control device\n"); + phy->phy_power_syscon = NULL; + } else { + if (of_property_read_u32_index(node, + "syscon-phy-power", 1, + &phy->power_reg)) { + dev_err(dev, "couldn't get power reg. offset\n"); + return -EINVAL; + } } - control_pdev = of_find_device_by_node(control_node); - if (!control_pdev) { - dev_err(dev, "Failed to get control device\n"); - return -EINVAL; - } + if (!phy->phy_power_syscon) { + control_node = of_parse_phandle(node, "ctrl-module", 0); + if (!control_node) { + dev_err(dev, "Failed to get control device phandle\n"); + return -EINVAL; + } - phy->control_dev = &control_pdev->dev; + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(dev, "Failed to get control device\n"); + return -EINVAL; + } + + phy->control_dev = &control_pdev->dev; + } if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) { phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node, -- cgit v1.2.3 From 3f2362c56f7ab0bf2ca1281227ca61f77c0c63fd Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 21 Dec 2015 14:24:11 +0530 Subject: phy: ti-pipe3: use *syscon* framework API to set PCS value of the PHY Deprecate using phy-omap-control driver to set PCS value of the PHY and start using *syscon* API to do the same. Signed-off-by: Kishon Vijay Abraham I Acked-by: Roger Quadros Acked-by: Rob Herring --- Documentation/devicetree/bindings/phy/ti-phy.txt | 2 ++ drivers/phy/phy-ti-pipe3.c | 34 ++++++++++++++++++++++-- 2 files changed, 34 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index e06f980fa2ba..49e5b0c6ed87 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -83,6 +83,8 @@ Optional properties: - syscon-pllreset: Handle to system control region that contains the CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0 register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy. + - syscon-pcs : phandle/offset pair. Phandle to the system control module and the + register offset to write the PCS delay value. Deprecated properties: - ctrl-module : phandle of the control module used by PHY driver to power on diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index a47b1902a36f..0a477d24cf76 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -65,6 +65,9 @@ #define PIPE3_PHY_TX_RX_POWERON 0x3 #define PIPE3_PHY_TX_RX_POWEROFF 0x0 +#define PCIE_PCS_MASK 0xFF0000 +#define PCIE_PCS_DELAY_COUNT_SHIFT 0x10 + /* * This is an Empirical value that works, need to confirm the actual * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status @@ -96,9 +99,11 @@ struct ti_pipe3 { struct clk *div_clk; struct pipe3_dpll_map *dpll_map; struct regmap *phy_power_syscon; /* ctrl. reg. acces */ + struct regmap *pcs_syscon; /* ctrl. reg. acces */ struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */ unsigned int dpll_reset_reg; /* reg. index within syscon */ unsigned int power_reg; /* power reg. index within syscon */ + unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */ bool sata_refclk_enabled; }; @@ -269,8 +274,15 @@ static int ti_pipe3_init(struct phy *x) * 18-1804. */ if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) { - omap_control_pcie_pcs(phy->control_dev, 0x96); - return 0; + if (!phy->pcs_syscon) { + omap_control_pcie_pcs(phy->control_dev, 0x96); + return 0; + } + + val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT; + ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg, + PCIE_PCS_MASK, val); + return ret; } /* Bring it out of IDLE if it is IDLE */ @@ -455,6 +467,24 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy) phy->control_dev = &control_pdev->dev; } + if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { + phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node, + "syscon-pcs"); + if (IS_ERR(phy->pcs_syscon)) { + dev_dbg(dev, + "can't get syscon-pcs, using omap control\n"); + phy->pcs_syscon = NULL; + } else { + if (of_property_read_u32_index(node, + "syscon-pcs", 1, + &phy->pcie_pcs_reg)) { + dev_err(dev, + "couldn't get pcie pcs reg. offset\n"); + return -EINVAL; + } + } + } + if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) { phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node, "syscon-pllreset"); -- cgit v1.2.3 From 9955a7835bf376e12482583958b2661f501b868b Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 21 Dec 2015 14:24:13 +0530 Subject: phy: omap-usb2: use *syscon* framework API to power on/off the PHY Deprecate using phy-omap-control driver to power on/off the PHY, and use *syscon* framework to do the same. This handles powering on/off the PHY for the USB2 PHYs used in various TI SoCs. Signed-off-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/phy/ti-phy.txt | 8 ++- drivers/phy/phy-omap-usb2.c | 92 +++++++++++++++++++----- include/linux/phy/omap_usb.h | 23 ++++++ 3 files changed, 105 insertions(+), 18 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 49e5b0c6ed87..a3b394587874 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -31,6 +31,8 @@ OMAP USB2 PHY Required properties: - compatible: Should be "ti,omap-usb2" + Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY + in DRA7x - reg : Address and length of the register set for the device. - #phy-cells: determine the number of cells that should be given in the phandle while referencing this phy. @@ -40,10 +42,14 @@ Required properties: * "wkupclk" - wakeup clock. * "refclk" - reference clock (optional). -Optional properties: +Deprecated properties: - ctrl-module : phandle of the control module used by PHY driver to power on the PHY. +Recommended properies: +- syscon-phy-power : phandle/offset pair. Phandle to the system control + module and the register offset to power on/off the PHY. + This is usually a subnode of ocp2scp to which it is connected. usb2phy@4a0ad080 { diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index c79633efd7fc..c134989052f5 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -29,6 +29,8 @@ #include #include #include +#include +#include #include #define USB2PHY_DISCON_BYP_LATCH (1 << 31) @@ -97,22 +99,38 @@ static int omap_usb_set_peripheral(struct usb_otg *otg, return 0; } +static int omap_usb_phy_power(struct omap_usb *phy, int on) +{ + u32 val; + int ret; + + if (!phy->syscon_phy_power) { + omap_control_phy_power(phy->control_dev, on); + return 0; + } + + if (on) + val = phy->power_on; + else + val = phy->power_off; + + ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg, + phy->mask, val); + return ret; +} + static int omap_usb_power_off(struct phy *x) { struct omap_usb *phy = phy_get_drvdata(x); - omap_control_phy_power(phy->control_dev, 0); - - return 0; + return omap_usb_phy_power(phy, false); } static int omap_usb_power_on(struct phy *x) { struct omap_usb *phy = phy_get_drvdata(x); - omap_control_phy_power(phy->control_dev, 1); - - return 0; + return omap_usb_phy_power(phy, true); } static int omap_usb_init(struct phy *x) @@ -147,21 +165,38 @@ static const struct phy_ops ops = { static const struct usb_phy_data omap_usb2_data = { .label = "omap_usb2", .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS, + .mask = OMAP_DEV_PHY_PD, + .power_off = OMAP_DEV_PHY_PD, }; static const struct usb_phy_data omap5_usb2_data = { .label = "omap5_usb2", .flags = 0, + .mask = OMAP_DEV_PHY_PD, + .power_off = OMAP_DEV_PHY_PD, }; static const struct usb_phy_data dra7x_usb2_data = { .label = "dra7x_usb2", .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, + .mask = OMAP_DEV_PHY_PD, + .power_off = OMAP_DEV_PHY_PD, +}; + +static const struct usb_phy_data dra7x_usb2_phy2_data = { + .label = "dra7x_usb2_phy2", + .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, + .mask = OMAP_USB2_PHY_PD, + .power_off = OMAP_USB2_PHY_PD, }; static const struct usb_phy_data am437x_usb2_data = { .label = "am437x_usb2", .flags = 0, + .mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD | + AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN, + .power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN, + .power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD, }; static const struct of_device_id omap_usb2_id_table[] = { @@ -177,6 +212,10 @@ static const struct of_device_id omap_usb2_id_table[] = { .compatible = "ti,dra7x-usb2", .data = &dra7x_usb2_data, }, + { + .compatible = "ti,dra7x-usb2-phy2", + .data = &dra7x_usb2_phy2_data, + }, { .compatible = "ti,am437x-usb2", .data = &am437x_usb2_data, @@ -219,6 +258,9 @@ static int omap_usb2_probe(struct platform_device *pdev) phy->phy.label = phy_data->label; phy->phy.otg = otg; phy->phy.type = USB_PHY_TYPE_USB2; + phy->mask = phy_data->mask; + phy->power_on = phy_data->power_on; + phy->power_off = phy_data->power_off; if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -228,20 +270,36 @@ static int omap_usb2_probe(struct platform_device *pdev) phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT; } - control_node = of_parse_phandle(node, "ctrl-module", 0); - if (!control_node) { - dev_err(&pdev->dev, "Failed to get control device phandle\n"); - return -EINVAL; - } + phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node, + "syscon-phy-power"); + if (IS_ERR(phy->syscon_phy_power)) { + dev_dbg(&pdev->dev, + "can't get syscon-phy-power, using control device\n"); + phy->syscon_phy_power = NULL; + + control_node = of_parse_phandle(node, "ctrl-module", 0); + if (!control_node) { + dev_err(&pdev->dev, + "Failed to get control device phandle\n"); + return -EINVAL; + } - control_pdev = of_find_device_by_node(control_node); - if (!control_pdev) { - dev_err(&pdev->dev, "Failed to get control device\n"); - return -EINVAL; + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + return -EINVAL; + } + phy->control_dev = &control_pdev->dev; + } else { + if (of_property_read_u32_index(node, + "syscon-phy-power", 1, + &phy->power_reg)) { + dev_err(&pdev->dev, + "couldn't get power reg. offset\n"); + return -EINVAL; + } } - phy->control_dev = &control_pdev->dev; - otg->set_host = omap_usb_set_host; otg->set_peripheral = omap_usb_set_peripheral; if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS) diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h index dc2c541a619b..2e5fb870efa9 100644 --- a/include/linux/phy/omap_usb.h +++ b/include/linux/phy/omap_usb.h @@ -30,6 +30,12 @@ struct usb_dpll_params { u32 mf; }; +enum omap_usb_phy_type { + TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */ + TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */ + TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */ +}; + struct omap_usb { struct usb_phy phy; struct phy_companion *comparator; @@ -40,11 +46,20 @@ struct omap_usb { struct clk *wkupclk; struct clk *optclk; u8 flags; + enum omap_usb_phy_type type; + struct regmap *syscon_phy_power; /* ctrl. reg. acces */ + unsigned int power_reg; /* power reg. index within syscon */ + u32 mask; + u32 power_on; + u32 power_off; }; struct usb_phy_data { const char *label; u8 flags; + u32 mask; + u32 power_on; + u32 power_off; }; /* Driver Flags */ @@ -52,6 +67,14 @@ struct usb_phy_data { #define OMAP_USB2_HAS_SET_VBUS (1 << 1) #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT (1 << 2) +#define OMAP_DEV_PHY_PD BIT(0) +#define OMAP_USB2_PHY_PD BIT(28) + +#define AM437X_USB2_PHY_PD BIT(0) +#define AM437X_USB2_OTG_PD BIT(1) +#define AM437X_USB2_OTGVDET_EN BIT(19) +#define AM437X_USB2_OTGSESSEND_EN BIT(20) + #define phy_to_omapusb(x) container_of((x), struct omap_usb, phy) #if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE) -- cgit v1.2.3 From d9c0e6c10dfed44bb35d6db4293b18af51e752ac Mon Sep 17 00:00:00 2001 From: Chen Feng Date: Mon, 12 Oct 2015 15:00:15 +0800 Subject: docs: dts: Add documentation for hi6220 SoC ION node Documentation for hi6220 SoC ION node Signed-off-by: Chen Feng Signed-off-by: Yu Dongbin Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/staging/ion/hi6220-ion.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/staging/ion/hi6220-ion.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/staging/ion/hi6220-ion.txt b/Documentation/devicetree/bindings/staging/ion/hi6220-ion.txt new file mode 100644 index 000000000000..c59e27c632c1 --- /dev/null +++ b/Documentation/devicetree/bindings/staging/ion/hi6220-ion.txt @@ -0,0 +1,31 @@ +Hi6220 SoC ION +=================================================================== +Required properties: +- compatible : "hisilicon,hi6220-ion" +- list of the ION heaps + - heap name : maybe heap_sys_user@0 + - heap id : id should be unique in the system. + - heap base : base ddr address of the heap,0 means that + it is dynamic. + - heap size : memory size and 0 means it is dynamic. + - heap type : the heap type of the heap, please also + see the define in ion.h(drivers/staging/android/uapi/ion.h) +------------------------------------------------------------------- +Example: + hi6220-ion { + compatible = "hisilicon,hi6220-ion"; + heap_sys_user@0 { + heap-name = "sys_user"; + heap-id = <0x0>; + heap-base = <0x0>; + heap-size = <0x0>; + heap-type = "ion_system"; + }; + heap_sys_contig@0 { + heap-name = "sys_contig"; + heap-id = <0x1>; + heap-base = <0x0>; + heap-size = <0x0>; + heap-type = "ion_system_contig"; + }; + }; -- cgit v1.2.3 From 746bfe63bba37ad55956b7377c9af494e7e28929 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 21 Dec 2015 18:40:04 +0900 Subject: usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller R-Car H3 has USB3.0 peripheral controllers. This controller's has the following features: - Supports super, high and full speed - Contains 30 pipes for bulk or interrupt transfer - Contains dedicated DMA controller This driver doesn't support the dedicated DMAC for now. Acked-by: Rob Herring Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/renesas_usb3.txt | 23 + drivers/usb/gadget/udc/Kconfig | 11 + drivers/usb/gadget/udc/Makefile | 1 + drivers/usb/gadget/udc/renesas_usb3.c | 1975 ++++++++++++++++++++ 4 files changed, 2010 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/renesas_usb3.txt create mode 100644 drivers/usb/gadget/udc/renesas_usb3.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt new file mode 100644 index 000000000000..8d52766f07b9 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt @@ -0,0 +1,23 @@ +Renesas Electronics USB3.0 Peripheral driver + +Required properties: + - compatible: Must contain one of the following: + - "renesas,r8a7795-usb3-peri" + - reg: Base address and length of the register for the USB3.0 Peripheral + - interrupts: Interrupt specifier for the USB3.0 Peripheral + - clocks: clock phandle and specifier pair + +Example: + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a7795-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD 328>; + }; + + usb3_peri1: usb@ee060000 { + compatible = "renesas,r8a7795-usb3-peri"; + reg = <0 0xee060000 0 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD 327>; + }; diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index cdbff54e07ac..753c29bd11ad 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -174,6 +174,17 @@ config USB_RENESAS_USBHS_UDC dynamically linked module called "renesas_usbhs" and force all gadget drivers to also be dynamically linked. +config USB_RENESAS_USB3 + tristate 'Renesas USB3.0 Peripheral controller' + depends on ARCH_SHMOBILE || COMPILE_TEST + help + Renesas USB3.0 Peripheral controller is a USB peripheral controller + that supports super, high, and full speed USB 3.0 data transfers. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "renesas_usb3" and force all + gadget drivers to also be dynamically linked. + config USB_PXA27X tristate "PXA 27x" help diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile index fba2049bf985..dfee53446319 100644 --- a/drivers/usb/gadget/udc/Makefile +++ b/drivers/usb/gadget/udc/Makefile @@ -19,6 +19,7 @@ fsl_usb2_udc-y := fsl_udc_core.o fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o obj-$(CONFIG_USB_M66592) += m66592-udc.o obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o +obj-$(CONFIG_USB_RENESAS_USB3) += renesas_usb3.o obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c new file mode 100644 index 000000000000..93a3bec81df7 --- /dev/null +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -0,0 +1,1975 @@ +/* + * Renesas USB3.0 Peripheral driver (USB gadget) + * + * Copyright (C) 2015 Renesas Electronics Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* register definitions */ +#define USB3_AXI_INT_STA 0x008 +#define USB3_AXI_INT_ENA 0x00c +#define USB3_DMA_INT_STA 0x010 +#define USB3_DMA_INT_ENA 0x014 +#define USB3_USB_COM_CON 0x200 +#define USB3_USB20_CON 0x204 +#define USB3_USB30_CON 0x208 +#define USB3_USB_STA 0x210 +#define USB3_DRD_CON 0x218 +#define USB3_USB_INT_STA_1 0x220 +#define USB3_USB_INT_STA_2 0x224 +#define USB3_USB_INT_ENA_1 0x228 +#define USB3_USB_INT_ENA_2 0x22c +#define USB3_STUP_DAT_0 0x230 +#define USB3_STUP_DAT_1 0x234 +#define USB3_P0_MOD 0x280 +#define USB3_P0_CON 0x288 +#define USB3_P0_STA 0x28c +#define USB3_P0_INT_STA 0x290 +#define USB3_P0_INT_ENA 0x294 +#define USB3_P0_LNG 0x2a0 +#define USB3_P0_READ 0x2a4 +#define USB3_P0_WRITE 0x2a8 +#define USB3_PIPE_COM 0x2b0 +#define USB3_PN_MOD 0x2c0 +#define USB3_PN_RAMMAP 0x2c4 +#define USB3_PN_CON 0x2c8 +#define USB3_PN_STA 0x2cc +#define USB3_PN_INT_STA 0x2d0 +#define USB3_PN_INT_ENA 0x2d4 +#define USB3_PN_LNG 0x2e0 +#define USB3_PN_READ 0x2e4 +#define USB3_PN_WRITE 0x2e8 +#define USB3_SSIFCMD 0x340 + +/* AXI_INT_ENA and AXI_INT_STA */ +#define AXI_INT_DMAINT BIT(31) +#define AXI_INT_EPCINT BIT(30) + +/* LCLKSEL */ +#define LCLKSEL_LSEL BIT(18) + +/* USB_COM_CON */ +#define USB_COM_CON_CONF BIT(24) +#define USB_COM_CON_SPD_MODE BIT(17) +#define USB_COM_CON_EP0_EN BIT(16) +#define USB_COM_CON_DEV_ADDR_SHIFT 8 +#define USB_COM_CON_DEV_ADDR_MASK GENMASK(14, USB_COM_CON_DEV_ADDR_SHIFT) +#define USB_COM_CON_DEV_ADDR(n) (((n) << USB_COM_CON_DEV_ADDR_SHIFT) & \ + USB_COM_CON_DEV_ADDR_MASK) +#define USB_COM_CON_RX_DETECTION BIT(1) +#define USB_COM_CON_PIPE_CLR BIT(0) + +/* USB20_CON */ +#define USB20_CON_B2_PUE BIT(31) +#define USB20_CON_B2_SUSPEND BIT(24) +#define USB20_CON_B2_CONNECT BIT(17) +#define USB20_CON_B2_TSTMOD_SHIFT 8 +#define USB20_CON_B2_TSTMOD_MASK GENMASK(10, USB20_CON_B2_TSTMOD_SHIFT) +#define USB20_CON_B2_TSTMOD(n) (((n) << USB20_CON_B2_TSTMOD_SHIFT) & \ + USB20_CON_B2_TSTMOD_MASK) +#define USB20_CON_B2_TSTMOD_EN BIT(0) + +/* USB30_CON */ +#define USB30_CON_POW_SEL_SHIFT 24 +#define USB30_CON_POW_SEL_MASK GENMASK(26, USB30_CON_POW_SEL_SHIFT) +#define USB30_CON_POW_SEL_IN_U3 BIT(26) +#define USB30_CON_POW_SEL_IN_DISCON 0 +#define USB30_CON_POW_SEL_P2_TO_P0 BIT(25) +#define USB30_CON_POW_SEL_P0_TO_P3 BIT(24) +#define USB30_CON_POW_SEL_P0_TO_P2 0 +#define USB30_CON_B3_PLLWAKE BIT(23) +#define USB30_CON_B3_CONNECT BIT(17) +#define USB30_CON_B3_HOTRST_CMP BIT(1) + +/* USB_STA */ +#define USB_STA_SPEED_MASK (BIT(2) | BIT(1)) +#define USB_STA_SPEED_HS BIT(2) +#define USB_STA_SPEED_FS BIT(1) +#define USB_STA_SPEED_SS 0 +#define USB_STA_VBUS_STA BIT(0) + +/* DRD_CON */ +#define DRD_CON_PERI_CON BIT(24) + +/* USB_INT_ENA_1 and USB_INT_STA_1 */ +#define USB_INT_1_B3_PLLWKUP BIT(31) +#define USB_INT_1_B3_LUPSUCS BIT(30) +#define USB_INT_1_B3_DISABLE BIT(27) +#define USB_INT_1_B3_WRMRST BIT(21) +#define USB_INT_1_B3_HOTRST BIT(20) +#define USB_INT_1_B2_USBRST BIT(12) +#define USB_INT_1_B2_L1SPND BIT(11) +#define USB_INT_1_B2_SPND BIT(9) +#define USB_INT_1_B2_RSUM BIT(8) +#define USB_INT_1_SPEED BIT(1) +#define USB_INT_1_VBUS_CNG BIT(0) + +/* USB_INT_ENA_2 and USB_INT_STA_2 */ +#define USB_INT_2_PIPE(n) BIT(n) + +/* P0_MOD */ +#define P0_MOD_DIR BIT(6) + +/* P0_CON and PN_CON */ +#define PX_CON_BYTE_EN_MASK (BIT(10) | BIT(9)) +#define PX_CON_BYTE_EN_SHIFT 9 +#define PX_CON_BYTE_EN_BYTES(n) (((n) << PX_CON_BYTE_EN_SHIFT) & \ + PX_CON_BYTE_EN_MASK) +#define PX_CON_SEND BIT(8) + +/* P0_CON */ +#define P0_CON_ST_RES_MASK (BIT(27) | BIT(26)) +#define P0_CON_ST_RES_FORCE_STALL BIT(27) +#define P0_CON_ST_RES_NORMAL BIT(26) +#define P0_CON_ST_RES_FORCE_NRDY 0 +#define P0_CON_OT_RES_MASK (BIT(25) | BIT(24)) +#define P0_CON_OT_RES_FORCE_STALL BIT(25) +#define P0_CON_OT_RES_NORMAL BIT(24) +#define P0_CON_OT_RES_FORCE_NRDY 0 +#define P0_CON_IN_RES_MASK (BIT(17) | BIT(16)) +#define P0_CON_IN_RES_FORCE_STALL BIT(17) +#define P0_CON_IN_RES_NORMAL BIT(16) +#define P0_CON_IN_RES_FORCE_NRDY 0 +#define P0_CON_RES_WEN BIT(7) +#define P0_CON_BCLR BIT(1) + +/* P0_STA and PN_STA */ +#define PX_STA_BUFSTS BIT(0) + +/* P0_INT_ENA and P0_INT_STA */ +#define P0_INT_STSED BIT(18) +#define P0_INT_STSST BIT(17) +#define P0_INT_SETUP BIT(16) +#define P0_INT_RCVNL BIT(8) +#define P0_INT_ERDY BIT(7) +#define P0_INT_FLOW BIT(6) +#define P0_INT_STALL BIT(2) +#define P0_INT_NRDY BIT(1) +#define P0_INT_BFRDY BIT(0) +#define P0_INT_ALL_BITS (P0_INT_STSED | P0_INT_SETUP | P0_INT_BFRDY) + +/* PN_MOD */ +#define PN_MOD_DIR BIT(6) +#define PN_MOD_TYPE_SHIFT 4 +#define PN_MOD_TYPE_MASK GENMASK(5, PN_MOD_TYPE_SHIFT) +#define PN_MOD_TYPE(n) (((n) << PN_MOD_TYPE_SHIFT) & \ + PN_MOD_TYPE_MASK) +#define PN_MOD_EPNUM_MASK GENMASK(3, 0) +#define PN_MOD_EPNUM(n) ((n) & PN_MOD_EPNUM_MASK) + +/* PN_RAMMAP */ +#define PN_RAMMAP_RAMAREA_SHIFT 29 +#define PN_RAMMAP_RAMAREA_MASK GENMASK(31, PN_RAMMAP_RAMAREA_SHIFT) +#define PN_RAMMAP_RAMAREA_16KB BIT(31) +#define PN_RAMMAP_RAMAREA_8KB (BIT(30) | BIT(29)) +#define PN_RAMMAP_RAMAREA_4KB BIT(30) +#define PN_RAMMAP_RAMAREA_2KB BIT(29) +#define PN_RAMMAP_RAMAREA_1KB 0 +#define PN_RAMMAP_MPKT_SHIFT 16 +#define PN_RAMMAP_MPKT_MASK GENMASK(26, PN_RAMMAP_MPKT_SHIFT) +#define PN_RAMMAP_MPKT(n) (((n) << PN_RAMMAP_MPKT_SHIFT) & \ + PN_RAMMAP_MPKT_MASK) +#define PN_RAMMAP_RAMIF_SHIFT 14 +#define PN_RAMMAP_RAMIF_MASK GENMASK(15, PN_RAMMAP_RAMIF_SHIFT) +#define PN_RAMMAP_RAMIF(n) (((n) << PN_RAMMAP_RAMIF_SHIFT) & \ + PN_RAMMAP_RAMIF_MASK) +#define PN_RAMMAP_BASEAD_MASK GENMASK(13, 0) +#define PN_RAMMAP_BASEAD(offs) (((offs) >> 3) & PN_RAMMAP_BASEAD_MASK) +#define PN_RAMMAP_DATA(area, ramif, basead) ((PN_RAMMAP_##area) | \ + (PN_RAMMAP_RAMIF(ramif)) | \ + (PN_RAMMAP_BASEAD(basead))) + +/* PN_CON */ +#define PN_CON_EN BIT(31) +#define PN_CON_DATAIF_EN BIT(30) +#define PN_CON_RES_MASK (BIT(17) | BIT(16)) +#define PN_CON_RES_FORCE_STALL BIT(17) +#define PN_CON_RES_NORMAL BIT(16) +#define PN_CON_RES_FORCE_NRDY 0 +#define PN_CON_LAST BIT(11) +#define PN_CON_RES_WEN BIT(7) +#define PN_CON_CLR BIT(0) + +/* PN_INT_STA and PN_INT_ENA */ +#define PN_INT_LSTTR BIT(4) +#define PN_INT_BFRDY BIT(0) + +/* USB3_SSIFCMD */ +#define SSIFCMD_URES_U2 BIT(9) +#define SSIFCMD_URES_U1 BIT(8) +#define SSIFCMD_UDIR_U2 BIT(7) +#define SSIFCMD_UDIR_U1 BIT(6) +#define SSIFCMD_UREQ_U2 BIT(5) +#define SSIFCMD_UREQ_U1 BIT(4) + +#define USB3_EP0_SS_MAX_PACKET_SIZE 512 +#define USB3_EP0_HSFS_MAX_PACKET_SIZE 64 +#define USB3_EP0_BUF_SIZE 8 +#define USB3_MAX_NUM_PIPES 30 +#define USB3_WAIT_US 3 + +struct renesas_usb3; +struct renesas_usb3_request { + struct usb_request req; + struct list_head queue; +}; + +#define USB3_EP_NAME_SIZE 8 +struct renesas_usb3_ep { + struct usb_ep ep; + struct renesas_usb3 *usb3; + int num; + char ep_name[USB3_EP_NAME_SIZE]; + struct list_head queue; + u32 rammap_val; + bool dir_in; + bool halt; + bool wedge; + bool started; +}; + +struct renesas_usb3_priv { + int ramsize_per_ramif; /* unit = bytes */ + int num_ramif; + int ramsize_per_pipe; /* unit = bytes */ + bool workaround_for_vbus; /* if true, don't check vbus signal */ +}; + +struct renesas_usb3 { + void __iomem *reg; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + struct renesas_usb3_ep *usb3_ep; + int num_usb3_eps; + + spinlock_t lock; + int disabled_count; + + struct usb_request *ep0_req; + u16 test_mode; + u8 ep0_buf[USB3_EP0_BUF_SIZE]; + bool softconnect; + bool workaround_for_vbus; +}; + +#define gadget_to_renesas_usb3(_gadget) \ + container_of(_gadget, struct renesas_usb3, gadget) +#define renesas_usb3_to_gadget(renesas_usb3) (&renesas_usb3->gadget) +#define usb3_to_dev(_usb3) (_usb3->gadget.dev.parent) + +#define usb_ep_to_usb3_ep(_ep) container_of(_ep, struct renesas_usb3_ep, ep) +#define usb3_ep_to_usb3(_usb3_ep) (_usb3_ep->usb3) +#define usb_req_to_usb3_req(_req) container_of(_req, \ + struct renesas_usb3_request, req) + +#define usb3_get_ep(usb3, n) ((usb3)->usb3_ep + (n)) +#define usb3_for_each_ep(usb3_ep, usb3, i) \ + for ((i) = 0, usb3_ep = usb3_get_ep(usb3, (i)); \ + (i) < (usb3)->num_usb3_eps; \ + (i)++, usb3_ep = usb3_get_ep(usb3, (i))) + +static const char udc_name[] = "renesas_usb3"; + +static void usb3_write(struct renesas_usb3 *usb3, u32 data, u32 offs) +{ + iowrite32(data, usb3->reg + offs); +} + +static u32 usb3_read(struct renesas_usb3 *usb3, u32 offs) +{ + return ioread32(usb3->reg + offs); +} + +static void usb3_set_bit(struct renesas_usb3 *usb3, u32 bits, u32 offs) +{ + u32 val = usb3_read(usb3, offs); + + val |= bits; + usb3_write(usb3, val, offs); +} + +static void usb3_clear_bit(struct renesas_usb3 *usb3, u32 bits, u32 offs) +{ + u32 val = usb3_read(usb3, offs); + + val &= ~bits; + usb3_write(usb3, val, offs); +} + +static int usb3_wait(struct renesas_usb3 *usb3, u32 reg, u32 mask, + u32 expected) +{ + int i; + + for (i = 0; i < USB3_WAIT_US; i++) { + if ((usb3_read(usb3, reg) & mask) == expected) + return 0; + udelay(1); + } + + dev_dbg(usb3_to_dev(usb3), "%s: timed out (%8x, %08x, %08x)\n", + __func__, reg, mask, expected); + + return -EBUSY; +} + +static void usb3_enable_irq_1(struct renesas_usb3 *usb3, u32 bits) +{ + usb3_set_bit(usb3, bits, USB3_USB_INT_ENA_1); +} + +static void usb3_disable_irq_1(struct renesas_usb3 *usb3, u32 bits) +{ + usb3_clear_bit(usb3, bits, USB3_USB_INT_ENA_1); +} + +static void usb3_enable_pipe_irq(struct renesas_usb3 *usb3, int num) +{ + usb3_set_bit(usb3, USB_INT_2_PIPE(num), USB3_USB_INT_ENA_2); +} + +static void usb3_disable_pipe_irq(struct renesas_usb3 *usb3, int num) +{ + usb3_clear_bit(usb3, USB_INT_2_PIPE(num), USB3_USB_INT_ENA_2); +} + +static void usb3_init_axi_bridge(struct renesas_usb3 *usb3) +{ + /* Set AXI_INT */ + usb3_write(usb3, ~0, USB3_DMA_INT_STA); + usb3_write(usb3, 0, USB3_DMA_INT_ENA); + usb3_set_bit(usb3, AXI_INT_DMAINT | AXI_INT_EPCINT, USB3_AXI_INT_ENA); +} + +static void usb3_init_epc_registers(struct renesas_usb3 *usb3) +{ + /* FIXME: How to change host / peripheral mode as well? */ + usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON); + + usb3_write(usb3, ~0, USB3_USB_INT_STA_1); + usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); +} + +static bool usb3_wakeup_usb2_phy(struct renesas_usb3 *usb3) +{ + if (!(usb3_read(usb3, USB3_USB20_CON) & USB20_CON_B2_SUSPEND)) + return true; /* already waked it up */ + + usb3_clear_bit(usb3, USB20_CON_B2_SUSPEND, USB3_USB20_CON); + usb3_enable_irq_1(usb3, USB_INT_1_B2_RSUM); + + return false; +} + +static void usb3_usb2_pullup(struct renesas_usb3 *usb3, int pullup) +{ + u32 bits = USB20_CON_B2_PUE | USB20_CON_B2_CONNECT; + + if (usb3->softconnect && pullup) + usb3_set_bit(usb3, bits, USB3_USB20_CON); + else + usb3_clear_bit(usb3, bits, USB3_USB20_CON); +} + +static void usb3_set_test_mode(struct renesas_usb3 *usb3) +{ + u32 val = usb3_read(usb3, USB3_USB20_CON); + + val &= ~USB20_CON_B2_TSTMOD_MASK; + val |= USB20_CON_B2_TSTMOD(usb3->test_mode); + usb3_write(usb3, val | USB20_CON_B2_TSTMOD_EN, USB3_USB20_CON); + if (!usb3->test_mode) + usb3_clear_bit(usb3, USB20_CON_B2_TSTMOD_EN, USB3_USB20_CON); +} + +static void usb3_start_usb2_connection(struct renesas_usb3 *usb3) +{ + usb3->disabled_count++; + usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON); + usb3_set_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON); + usb3_usb2_pullup(usb3, 1); +} + +static int usb3_is_usb3_phy_in_u3(struct renesas_usb3 *usb3) +{ + return usb3_read(usb3, USB3_USB30_CON) & USB30_CON_POW_SEL_IN_U3; +} + +static bool usb3_wakeup_usb3_phy(struct renesas_usb3 *usb3) +{ + if (!usb3_is_usb3_phy_in_u3(usb3)) + return true; /* already waked it up */ + + usb3_set_bit(usb3, USB30_CON_B3_PLLWAKE, USB3_USB30_CON); + usb3_enable_irq_1(usb3, USB_INT_1_B3_PLLWKUP); + + return false; +} + +static u16 usb3_feature_get_un_enabled(struct renesas_usb3 *usb3) +{ + u32 mask_u2 = SSIFCMD_UDIR_U2 | SSIFCMD_UREQ_U2; + u32 mask_u1 = SSIFCMD_UDIR_U1 | SSIFCMD_UREQ_U1; + u32 val = usb3_read(usb3, USB3_SSIFCMD); + u16 ret = 0; + + /* Enables {U2,U1} if the bits of UDIR and UREQ are set to 0 */ + if (!(val & mask_u2)) + ret |= 1 << USB_DEV_STAT_U2_ENABLED; + if (!(val & mask_u1)) + ret |= 1 << USB_DEV_STAT_U1_ENABLED; + + return ret; +} + +static void usb3_feature_u2_enable(struct renesas_usb3 *usb3, bool enable) +{ + u32 bits = SSIFCMD_UDIR_U2 | SSIFCMD_UREQ_U2; + + /* Enables U2 if the bits of UDIR and UREQ are set to 0 */ + if (enable) + usb3_clear_bit(usb3, bits, USB3_SSIFCMD); + else + usb3_set_bit(usb3, bits, USB3_SSIFCMD); +} + +static void usb3_feature_u1_enable(struct renesas_usb3 *usb3, bool enable) +{ + u32 bits = SSIFCMD_UDIR_U1 | SSIFCMD_UREQ_U1; + + /* Enables U1 if the bits of UDIR and UREQ are set to 0 */ + if (enable) + usb3_clear_bit(usb3, bits, USB3_SSIFCMD); + else + usb3_set_bit(usb3, bits, USB3_SSIFCMD); +} + +static void usb3_start_operation_for_usb3(struct renesas_usb3 *usb3) +{ + usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON); + usb3_clear_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON); + usb3_set_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON); +} + +static void usb3_start_usb3_connection(struct renesas_usb3 *usb3) +{ + usb3_start_operation_for_usb3(usb3); + usb3_set_bit(usb3, USB_COM_CON_RX_DETECTION, USB3_USB_COM_CON); + + usb3_enable_irq_1(usb3, USB_INT_1_B3_LUPSUCS | USB_INT_1_B3_DISABLE | + USB_INT_1_SPEED); +} + +static void usb3_stop_usb3_connection(struct renesas_usb3 *usb3) +{ + usb3_clear_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON); +} + +static void usb3_transition_to_default_state(struct renesas_usb3 *usb3, + bool is_usb3) +{ + usb3_set_bit(usb3, USB_INT_2_PIPE(0), USB3_USB_INT_ENA_2); + usb3_write(usb3, P0_INT_ALL_BITS, USB3_P0_INT_STA); + usb3_set_bit(usb3, P0_INT_ALL_BITS, USB3_P0_INT_ENA); + + if (is_usb3) + usb3_enable_irq_1(usb3, USB_INT_1_B3_WRMRST | + USB_INT_1_B3_HOTRST); + else + usb3_enable_irq_1(usb3, USB_INT_1_B2_SPND | + USB_INT_1_B2_L1SPND | USB_INT_1_B2_USBRST); +} + +static void usb3_connect(struct renesas_usb3 *usb3) +{ + if (usb3_wakeup_usb3_phy(usb3)) + usb3_start_usb3_connection(usb3); +} + +static void usb3_reset_epc(struct renesas_usb3 *usb3) +{ + usb3_clear_bit(usb3, USB_COM_CON_CONF, USB3_USB_COM_CON); + usb3_clear_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON); + usb3_set_bit(usb3, USB_COM_CON_PIPE_CLR, USB3_USB_COM_CON); + usb3->test_mode = 0; + usb3_set_test_mode(usb3); +} + +static void usb3_disconnect(struct renesas_usb3 *usb3) +{ + usb3->disabled_count = 0; + usb3_usb2_pullup(usb3, 0); + usb3_clear_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON); + usb3_reset_epc(usb3); + + if (usb3->driver) + usb3->driver->disconnect(&usb3->gadget); +} + +static void usb3_check_vbus(struct renesas_usb3 *usb3) +{ + if (usb3->workaround_for_vbus) { + usb3_connect(usb3); + } else { + if (usb3_read(usb3, USB3_USB_STA) & USB_STA_VBUS_STA) + usb3_connect(usb3); + else + usb3_disconnect(usb3); + } +} + +static void renesas_usb3_init_controller(struct renesas_usb3 *usb3) +{ + usb3_init_axi_bridge(usb3); + usb3_init_epc_registers(usb3); + + usb3_check_vbus(usb3); +} + +static void renesas_usb3_stop_controller(struct renesas_usb3 *usb3) +{ + usb3_disconnect(usb3); + usb3_write(usb3, 0, USB3_P0_INT_ENA); + usb3_write(usb3, 0, USB3_PN_INT_ENA); + usb3_write(usb3, 0, USB3_USB_INT_ENA_1); + usb3_write(usb3, 0, USB3_USB_INT_ENA_2); + usb3_write(usb3, 0, USB3_AXI_INT_ENA); +} + +static void usb3_irq_epc_int_1_pll_wakeup(struct renesas_usb3 *usb3) +{ + usb3_disable_irq_1(usb3, USB_INT_1_B3_PLLWKUP); + usb3_clear_bit(usb3, USB30_CON_B3_PLLWAKE, USB3_USB30_CON); + usb3_start_usb3_connection(usb3); +} + +static void usb3_irq_epc_int_1_linkup_success(struct renesas_usb3 *usb3) +{ + usb3_transition_to_default_state(usb3, true); +} + +static void usb3_irq_epc_int_1_resume(struct renesas_usb3 *usb3) +{ + usb3_disable_irq_1(usb3, USB_INT_1_B2_RSUM); + usb3_start_usb2_connection(usb3); + usb3_transition_to_default_state(usb3, false); +} + +static void usb3_irq_epc_int_1_disable(struct renesas_usb3 *usb3) +{ + usb3_stop_usb3_connection(usb3); + if (usb3_wakeup_usb2_phy(usb3)) + usb3_irq_epc_int_1_resume(usb3); +} + +static void usb3_irq_epc_int_1_bus_reset(struct renesas_usb3 *usb3) +{ + usb3_reset_epc(usb3); + if (usb3->disabled_count < 3) + usb3_start_usb3_connection(usb3); + else + usb3_start_usb2_connection(usb3); +} + +static void usb3_irq_epc_int_1_vbus_change(struct renesas_usb3 *usb3) +{ + usb3_check_vbus(usb3); +} + +static void usb3_irq_epc_int_1_hot_reset(struct renesas_usb3 *usb3) +{ + usb3_reset_epc(usb3); + usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON); + + /* This bit shall be set within 12ms from the start of HotReset */ + usb3_set_bit(usb3, USB30_CON_B3_HOTRST_CMP, USB3_USB30_CON); +} + +static void usb3_irq_epc_int_1_warm_reset(struct renesas_usb3 *usb3) +{ + usb3_reset_epc(usb3); + usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON); + + usb3_start_operation_for_usb3(usb3); + usb3_enable_irq_1(usb3, USB_INT_1_SPEED); +} + +static void usb3_irq_epc_int_1_speed(struct renesas_usb3 *usb3) +{ + u32 speed = usb3_read(usb3, USB3_USB_STA) & USB_STA_SPEED_MASK; + + switch (speed) { + case USB_STA_SPEED_SS: + usb3->gadget.speed = USB_SPEED_SUPER; + break; + case USB_STA_SPEED_HS: + usb3->gadget.speed = USB_SPEED_HIGH; + break; + case USB_STA_SPEED_FS: + usb3->gadget.speed = USB_SPEED_FULL; + break; + default: + usb3->gadget.speed = USB_SPEED_UNKNOWN; + break; + } +} + +static void usb3_irq_epc_int_1(struct renesas_usb3 *usb3, u32 int_sta_1) +{ + if (int_sta_1 & USB_INT_1_B3_PLLWKUP) + usb3_irq_epc_int_1_pll_wakeup(usb3); + + if (int_sta_1 & USB_INT_1_B3_LUPSUCS) + usb3_irq_epc_int_1_linkup_success(usb3); + + if (int_sta_1 & USB_INT_1_B3_HOTRST) + usb3_irq_epc_int_1_hot_reset(usb3); + + if (int_sta_1 & USB_INT_1_B3_WRMRST) + usb3_irq_epc_int_1_warm_reset(usb3); + + if (int_sta_1 & USB_INT_1_B3_DISABLE) + usb3_irq_epc_int_1_disable(usb3); + + if (int_sta_1 & USB_INT_1_B2_USBRST) + usb3_irq_epc_int_1_bus_reset(usb3); + + if (int_sta_1 & USB_INT_1_B2_RSUM) + usb3_irq_epc_int_1_resume(usb3); + + if (int_sta_1 & USB_INT_1_SPEED) + usb3_irq_epc_int_1_speed(usb3); + + if (int_sta_1 & USB_INT_1_VBUS_CNG) + usb3_irq_epc_int_1_vbus_change(usb3); +} + +static struct renesas_usb3_request *__usb3_get_request(struct renesas_usb3_ep + *usb3_ep) +{ + return list_first_entry_or_null(&usb3_ep->queue, + struct renesas_usb3_request, queue); +} + +static struct renesas_usb3_request *usb3_get_request(struct renesas_usb3_ep + *usb3_ep) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + struct renesas_usb3_request *usb3_req; + unsigned long flags; + + spin_lock_irqsave(&usb3->lock, flags); + usb3_req = __usb3_get_request(usb3_ep); + spin_unlock_irqrestore(&usb3->lock, flags); + + return usb3_req; +} + +static void usb3_request_done(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req, int status) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + dev_dbg(usb3_to_dev(usb3), "giveback: ep%2d, %u, %u, %d\n", + usb3_ep->num, usb3_req->req.length, usb3_req->req.actual, + status); + usb3_req->req.status = status; + spin_lock_irqsave(&usb3->lock, flags); + usb3_ep->started = false; + list_del_init(&usb3_req->queue); + spin_unlock_irqrestore(&usb3->lock, flags); + usb_gadget_giveback_request(&usb3_ep->ep, &usb3_req->req); +} + +static void usb3_irq_epc_pipe0_status_end(struct renesas_usb3 *usb3) +{ + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0); + struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep); + + if (usb3_req) + usb3_request_done(usb3_ep, usb3_req, 0); + if (usb3->test_mode) + usb3_set_test_mode(usb3); +} + +static void usb3_get_setup_data(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl) +{ + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0); + u32 *data = (u32 *)ctrl; + + *data++ = usb3_read(usb3, USB3_STUP_DAT_0); + *data = usb3_read(usb3, USB3_STUP_DAT_1); + + /* update this driver's flag */ + usb3_ep->dir_in = !!(ctrl->bRequestType & USB_DIR_IN); +} + +static void usb3_set_p0_con_update_res(struct renesas_usb3 *usb3, u32 res) +{ + u32 val = usb3_read(usb3, USB3_P0_CON); + + val &= ~(P0_CON_ST_RES_MASK | P0_CON_OT_RES_MASK | P0_CON_IN_RES_MASK); + val |= res | P0_CON_RES_WEN; + usb3_write(usb3, val, USB3_P0_CON); +} + +static void usb3_set_p0_con_for_ctrl_read_data(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_NRDY | + P0_CON_OT_RES_FORCE_STALL | + P0_CON_IN_RES_NORMAL); +} + +static void usb3_set_p0_con_for_ctrl_read_status(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_NORMAL | + P0_CON_OT_RES_FORCE_STALL | + P0_CON_IN_RES_NORMAL); +} + +static void usb3_set_p0_con_for_ctrl_write_data(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_NRDY | + P0_CON_OT_RES_NORMAL | + P0_CON_IN_RES_FORCE_STALL); +} + +static void usb3_set_p0_con_for_ctrl_write_status(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_NORMAL | + P0_CON_OT_RES_NORMAL | + P0_CON_IN_RES_FORCE_STALL); +} + +static void usb3_set_p0_con_for_no_data(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_NORMAL | + P0_CON_OT_RES_FORCE_STALL | + P0_CON_IN_RES_FORCE_STALL); +} + +static void usb3_set_p0_con_stall(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_STALL | + P0_CON_OT_RES_FORCE_STALL | + P0_CON_IN_RES_FORCE_STALL); +} + +static void usb3_set_p0_con_stop(struct renesas_usb3 *usb3) +{ + usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_NRDY | + P0_CON_OT_RES_FORCE_NRDY | + P0_CON_IN_RES_FORCE_NRDY); +} + +static int usb3_pn_change(struct renesas_usb3 *usb3, int num) +{ + if (num == 0 || num > usb3->num_usb3_eps) + return -ENXIO; + + usb3_write(usb3, num, USB3_PIPE_COM); + + return 0; +} + +static void usb3_set_pn_con_update_res(struct renesas_usb3 *usb3, u32 res) +{ + u32 val = usb3_read(usb3, USB3_PN_CON); + + val &= ~PN_CON_RES_MASK; + val |= res & PN_CON_RES_MASK; + val |= PN_CON_RES_WEN; + usb3_write(usb3, val, USB3_PN_CON); +} + +static void usb3_pn_start(struct renesas_usb3 *usb3) +{ + usb3_set_pn_con_update_res(usb3, PN_CON_RES_NORMAL); +} + +static void usb3_pn_stop(struct renesas_usb3 *usb3) +{ + usb3_set_pn_con_update_res(usb3, PN_CON_RES_FORCE_NRDY); +} + +static void usb3_pn_stall(struct renesas_usb3 *usb3) +{ + usb3_set_pn_con_update_res(usb3, PN_CON_RES_FORCE_STALL); +} + +static int usb3_pn_con_clear(struct renesas_usb3 *usb3) +{ + usb3_set_bit(usb3, PN_CON_CLR, USB3_PN_CON); + + return usb3_wait(usb3, USB3_PN_CON, PN_CON_CLR, 0); +} + +static bool usb3_is_transfer_complete(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct usb_request *req = &usb3_req->req; + + if ((!req->zero && req->actual == req->length) || + (req->actual % usb3_ep->ep.maxpacket) || (req->length == 0)) + return true; + else + return false; +} + +static int usb3_wait_pipe_status(struct renesas_usb3_ep *usb3_ep, u32 mask) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + u32 sta_reg = usb3_ep->num ? USB3_PN_STA : USB3_P0_STA; + + return usb3_wait(usb3, sta_reg, mask, mask); +} + +static void usb3_set_px_con_send(struct renesas_usb3_ep *usb3_ep, int bytes, + bool last) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + u32 con_reg = usb3_ep->num ? USB3_PN_CON : USB3_P0_CON; + u32 val = usb3_read(usb3, con_reg); + + val |= PX_CON_SEND | PX_CON_BYTE_EN_BYTES(bytes); + val |= (usb3_ep->num && last) ? PN_CON_LAST : 0; + usb3_write(usb3, val, con_reg); +} + +static int usb3_write_pipe(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req, + u32 fifo_reg) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + int i; + int len = min_t(unsigned, usb3_req->req.length - usb3_req->req.actual, + usb3_ep->ep.maxpacket); + u8 *buf = usb3_req->req.buf + usb3_req->req.actual; + u32 tmp = 0; + bool is_last; + + if (usb3_wait_pipe_status(usb3_ep, PX_STA_BUFSTS) < 0) + return -EBUSY; + + /* Update gadget driver parameter */ + usb3_req->req.actual += len; + + /* Write data to the register */ + if (len >= 4) { + iowrite32_rep(usb3->reg + fifo_reg, buf, len / 4); + buf += (len / 4) * 4; + len %= 4; /* update len to use usb3_set_pX_con_send() */ + } + + if (len) { + for (i = 0; i < len; i++) + tmp |= buf[i] << (8 * i); + usb3_write(usb3, tmp, fifo_reg); + } + + is_last = usb3_is_transfer_complete(usb3_ep, usb3_req); + /* Send the data */ + usb3_set_px_con_send(usb3_ep, len, is_last); + + return is_last ? 0 : -EAGAIN; +} + +static u32 usb3_get_received_length(struct renesas_usb3_ep *usb3_ep) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + u32 lng_reg = usb3_ep->num ? USB3_PN_LNG : USB3_P0_LNG; + + return usb3_read(usb3, lng_reg); +} + +static int usb3_read_pipe(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req, u32 fifo_reg) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + int i; + int len = min_t(unsigned, usb3_req->req.length - usb3_req->req.actual, + usb3_get_received_length(usb3_ep)); + u8 *buf = usb3_req->req.buf + usb3_req->req.actual; + u32 tmp = 0; + + if (!len) + return 0; + + /* Update gadget driver parameter */ + usb3_req->req.actual += len; + + /* Read data from the register */ + if (len >= 4) { + ioread32_rep(usb3->reg + fifo_reg, buf, len / 4); + buf += (len / 4) * 4; + len %= 4; + } + + if (len) { + tmp = usb3_read(usb3, fifo_reg); + for (i = 0; i < len; i++) + buf[i] = (tmp >> (8 * i)) & 0xff; + } + + return usb3_is_transfer_complete(usb3_ep, usb3_req) ? 0 : -EAGAIN; +} + +static void usb3_set_status_stage(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + + if (usb3_ep->dir_in) { + usb3_set_p0_con_for_ctrl_read_status(usb3); + } else { + if (!usb3_req->req.length) + usb3_set_p0_con_for_no_data(usb3); + else + usb3_set_p0_con_for_ctrl_write_status(usb3); + } +} + +static void usb3_p0_xfer(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + int ret = -EAGAIN; + + if (usb3_ep->dir_in) + ret = usb3_write_pipe(usb3_ep, usb3_req, USB3_P0_WRITE); + else + ret = usb3_read_pipe(usb3_ep, usb3_req, USB3_P0_READ); + + if (!ret) + usb3_set_status_stage(usb3_ep, usb3_req); +} + +static void usb3_start_pipe0(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + + if (usb3_ep->started) + return; + + usb3_ep->started = true; + + if (usb3_ep->dir_in) { + usb3_set_bit(usb3, P0_MOD_DIR, USB3_P0_MOD); + usb3_set_p0_con_for_ctrl_read_data(usb3); + } else { + usb3_clear_bit(usb3, P0_MOD_DIR, USB3_P0_MOD); + usb3_set_p0_con_for_ctrl_write_data(usb3); + } + + usb3_p0_xfer(usb3_ep, usb3_req); +} + +static void usb3_start_pipen(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + struct renesas_usb3_request *usb3_req_first = usb3_get_request(usb3_ep); + unsigned long flags; + int ret = -EAGAIN; + u32 enable_bits = 0; + + if (usb3_ep->halt || usb3_ep->started) + return; + if (usb3_req != usb3_req_first) + return; + + spin_lock_irqsave(&usb3->lock, flags); + if (usb3_pn_change(usb3, usb3_ep->num) < 0) + goto out; + + usb3_ep->started = true; + usb3_pn_start(usb3); + + if (usb3_ep->dir_in) { + ret = usb3_write_pipe(usb3_ep, usb3_req, USB3_PN_WRITE); + enable_bits |= PN_INT_LSTTR; + } + + if (ret < 0) + enable_bits |= PN_INT_BFRDY; + + if (enable_bits) { + usb3_set_bit(usb3, enable_bits, USB3_PN_INT_ENA); + usb3_enable_pipe_irq(usb3, usb3_ep->num); + } +out: + spin_unlock_irqrestore(&usb3->lock, flags); +} + +static int renesas_usb3_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep); + struct renesas_usb3_request *usb3_req = usb_req_to_usb3_req(_req); + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + dev_dbg(usb3_to_dev(usb3), "ep_queue: ep%2d, %u\n", usb3_ep->num, + _req->length); + + _req->status = -EINPROGRESS; + _req->actual = 0; + spin_lock_irqsave(&usb3->lock, flags); + list_add_tail(&usb3_req->queue, &usb3_ep->queue); + spin_unlock_irqrestore(&usb3->lock, flags); + + if (!usb3_ep->num) + usb3_start_pipe0(usb3_ep, usb3_req); + else + usb3_start_pipen(usb3_ep, usb3_req); + + return 0; +} + +static void usb3_set_device_address(struct renesas_usb3 *usb3, u16 addr) +{ + /* DEV_ADDR bit field is cleared by WarmReset, HotReset and BusReset */ + usb3_set_bit(usb3, USB_COM_CON_DEV_ADDR(addr), USB3_USB_COM_CON); +} + +static bool usb3_std_req_set_address(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl) +{ + if (ctrl->wValue >= 128) + return true; /* stall */ + + usb3_set_device_address(usb3, ctrl->wValue); + usb3_set_p0_con_for_no_data(usb3); + + return false; +} + +static void usb3_pipe0_internal_xfer(struct renesas_usb3 *usb3, + void *tx_data, size_t len, + void (*complete)(struct usb_ep *ep, + struct usb_request *req)) +{ + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0); + + if (tx_data) + memcpy(usb3->ep0_buf, tx_data, + min_t(size_t, len, USB3_EP0_BUF_SIZE)); + + usb3->ep0_req->buf = &usb3->ep0_buf; + usb3->ep0_req->length = len; + usb3->ep0_req->complete = complete; + renesas_usb3_ep_queue(&usb3_ep->ep, usb3->ep0_req, GFP_ATOMIC); +} + +static void usb3_pipe0_get_status_completion(struct usb_ep *ep, + struct usb_request *req) +{ +} + +static bool usb3_std_req_get_status(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl) +{ + bool stall = false; + struct renesas_usb3_ep *usb3_ep; + int num; + u16 status = 0; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + if (usb3->gadget.is_selfpowered) + status |= 1 << USB_DEVICE_SELF_POWERED; + if (usb3->gadget.speed == USB_SPEED_SUPER) + status |= usb3_feature_get_un_enabled(usb3); + break; + case USB_RECIP_INTERFACE: + break; + case USB_RECIP_ENDPOINT: + num = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; + usb3_ep = usb3_get_ep(usb3, num); + if (usb3_ep->halt) + status |= 1 << USB_ENDPOINT_HALT; + break; + default: + stall = true; + break; + } + + if (!stall) { + status = cpu_to_le16(status); + dev_dbg(usb3_to_dev(usb3), "get_status: req = %p\n", + usb_req_to_usb3_req(usb3->ep0_req)); + usb3_pipe0_internal_xfer(usb3, &status, sizeof(status), + usb3_pipe0_get_status_completion); + } + + return stall; +} + +static bool usb3_std_req_feature_device(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl, bool set) +{ + bool stall = true; + u16 w_value = le16_to_cpu(ctrl->wValue); + + switch (w_value) { + case USB_DEVICE_TEST_MODE: + if (!set) + break; + usb3->test_mode = le16_to_cpu(ctrl->wIndex) >> 8; + stall = false; + break; + case USB_DEVICE_U1_ENABLE: + case USB_DEVICE_U2_ENABLE: + if (usb3->gadget.speed != USB_SPEED_SUPER) + break; + if (w_value == USB_DEVICE_U1_ENABLE) + usb3_feature_u1_enable(usb3, set); + if (w_value == USB_DEVICE_U2_ENABLE) + usb3_feature_u2_enable(usb3, set); + stall = false; + break; + default: + break; + } + + return stall; +} + +static int usb3_set_halt_p0(struct renesas_usb3_ep *usb3_ep, bool halt) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + + if (unlikely(usb3_ep->num)) + return -EINVAL; + + usb3_ep->halt = halt; + if (halt) + usb3_set_p0_con_stall(usb3); + else + usb3_set_p0_con_stop(usb3); + + return 0; +} + +static int usb3_set_halt_pn(struct renesas_usb3_ep *usb3_ep, bool halt, + bool is_clear_feature) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + spin_lock_irqsave(&usb3->lock, flags); + if (!usb3_pn_change(usb3, usb3_ep->num)) { + usb3_ep->halt = halt; + if (halt) { + usb3_pn_stall(usb3); + } else if (!is_clear_feature || !usb3_ep->wedge) { + usb3_pn_con_clear(usb3); + usb3_set_bit(usb3, PN_CON_EN, USB3_PN_CON); + usb3_pn_stop(usb3); + } + } + spin_unlock_irqrestore(&usb3->lock, flags); + + return 0; +} + +static int usb3_set_halt(struct renesas_usb3_ep *usb3_ep, bool halt, + bool is_clear_feature) +{ + int ret = 0; + + if (halt && usb3_ep->started) + return -EAGAIN; + + if (usb3_ep->num) + ret = usb3_set_halt_pn(usb3_ep, halt, is_clear_feature); + else + ret = usb3_set_halt_p0(usb3_ep, halt); + + return ret; +} + +static bool usb3_std_req_feature_endpoint(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl, + bool set) +{ + int num = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; + struct renesas_usb3_ep *usb3_ep; + struct renesas_usb3_request *usb3_req; + + if (le16_to_cpu(ctrl->wValue) != USB_ENDPOINT_HALT) + return true; /* stall */ + + usb3_ep = usb3_get_ep(usb3, num); + usb3_set_halt(usb3_ep, set, true); + + /* Restarts a queue if clear feature */ + if (!set) { + usb3_ep->started = false; + usb3_req = usb3_get_request(usb3_ep); + if (usb3_req) + usb3_start_pipen(usb3_ep, usb3_req); + } + + return false; +} + +static bool usb3_std_req_feature(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl, bool set) +{ + bool stall = false; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + stall = usb3_std_req_feature_device(usb3, ctrl, set); + break; + case USB_RECIP_INTERFACE: + break; + case USB_RECIP_ENDPOINT: + stall = usb3_std_req_feature_endpoint(usb3, ctrl, set); + break; + default: + stall = true; + break; + } + + if (!stall) + usb3_set_p0_con_for_no_data(usb3); + + return stall; +} + +static void usb3_pipe0_set_sel_completion(struct usb_ep *ep, + struct usb_request *req) +{ + /* TODO */ +} + +static bool usb3_std_req_set_sel(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl) +{ + u16 w_length = le16_to_cpu(ctrl->wLength); + + if (w_length != 6) + return true; /* stall */ + + dev_dbg(usb3_to_dev(usb3), "set_sel: req = %p\n", + usb_req_to_usb3_req(usb3->ep0_req)); + usb3_pipe0_internal_xfer(usb3, NULL, 6, usb3_pipe0_set_sel_completion); + + return false; +} + +static bool usb3_std_req_set_configuration(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl) +{ + if (ctrl->wValue > 0) + usb3_set_bit(usb3, USB_COM_CON_CONF, USB3_USB_COM_CON); + else + usb3_clear_bit(usb3, USB_COM_CON_CONF, USB3_USB_COM_CON); + + return false; +} + +/** + * usb3_handle_standard_request - handle some standard requests + * @usb3: the renesas_usb3 pointer + * @ctrl: a pointer of setup data + * + * Returns true if this function handled a standard request + */ +static bool usb3_handle_standard_request(struct renesas_usb3 *usb3, + struct usb_ctrlrequest *ctrl) +{ + bool ret = false; + bool stall = false; + + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (ctrl->bRequest) { + case USB_REQ_SET_ADDRESS: + stall = usb3_std_req_set_address(usb3, ctrl); + ret = true; + break; + case USB_REQ_GET_STATUS: + stall = usb3_std_req_get_status(usb3, ctrl); + ret = true; + break; + case USB_REQ_CLEAR_FEATURE: + stall = usb3_std_req_feature(usb3, ctrl, false); + ret = true; + break; + case USB_REQ_SET_FEATURE: + stall = usb3_std_req_feature(usb3, ctrl, true); + ret = true; + break; + case USB_REQ_SET_SEL: + stall = usb3_std_req_set_sel(usb3, ctrl); + ret = true; + break; + case USB_REQ_SET_ISOCH_DELAY: + /* This hardware doesn't support Isochronous xfer */ + stall = true; + ret = true; + break; + case USB_REQ_SET_CONFIGURATION: + usb3_std_req_set_configuration(usb3, ctrl); + break; + default: + break; + } + } + + if (stall) + usb3_set_p0_con_stall(usb3); + + return ret; +} + +static int usb3_p0_con_clear_buffer(struct renesas_usb3 *usb3) +{ + usb3_set_bit(usb3, P0_CON_BCLR, USB3_P0_CON); + + return usb3_wait(usb3, USB3_P0_CON, P0_CON_BCLR, 0); +} + +static void usb3_irq_epc_pipe0_setup(struct renesas_usb3 *usb3) +{ + struct usb_ctrlrequest ctrl; + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0); + + /* Call giveback function if previous transfer is not completed */ + if (usb3_ep->started) + usb3_request_done(usb3_ep, usb3_get_request(usb3_ep), + -ECONNRESET); + + usb3_p0_con_clear_buffer(usb3); + usb3_get_setup_data(usb3, &ctrl); + if (!usb3_handle_standard_request(usb3, &ctrl)) + if (usb3->driver->setup(&usb3->gadget, &ctrl) < 0) + usb3_set_p0_con_stall(usb3); +} + +static void usb3_irq_epc_pipe0_bfrdy(struct renesas_usb3 *usb3) +{ + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0); + struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep); + + if (!usb3_req) + return; + + usb3_p0_xfer(usb3_ep, usb3_req); +} + +static void usb3_irq_epc_pipe0(struct renesas_usb3 *usb3) +{ + u32 p0_int_sta = usb3_read(usb3, USB3_P0_INT_STA); + + p0_int_sta &= usb3_read(usb3, USB3_P0_INT_ENA); + usb3_write(usb3, p0_int_sta, USB3_P0_INT_STA); + if (p0_int_sta & P0_INT_STSED) + usb3_irq_epc_pipe0_status_end(usb3); + if (p0_int_sta & P0_INT_SETUP) + usb3_irq_epc_pipe0_setup(usb3); + if (p0_int_sta & P0_INT_BFRDY) + usb3_irq_epc_pipe0_bfrdy(usb3); +} + +static void usb3_request_done_pipen(struct renesas_usb3 *usb3, + struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req, + int status) +{ + usb3_pn_stop(usb3); + usb3_disable_pipe_irq(usb3, usb3_ep->num); + usb3_request_done(usb3_ep, usb3_req, status); + + /* get next usb3_req */ + usb3_req = usb3_get_request(usb3_ep); + if (usb3_req) + usb3_start_pipen(usb3_ep, usb3_req); +} + +static void usb3_irq_epc_pipen_lsttr(struct renesas_usb3 *usb3, int num) +{ + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, num); + struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep); + + if (!usb3_req) + return; + + if (usb3_ep->dir_in) { + dev_dbg(usb3_to_dev(usb3), "%s: len = %u, actual = %u\n", + __func__, usb3_req->req.length, usb3_req->req.actual); + usb3_request_done_pipen(usb3, usb3_ep, usb3_req, 0); + } +} + +static void usb3_irq_epc_pipen_bfrdy(struct renesas_usb3 *usb3, int num) +{ + struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, num); + struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep); + + if (!usb3_req) + return; + + if (usb3_ep->dir_in) { + /* Do not stop the IN pipe here to detect LSTTR interrupt */ + if (!usb3_write_pipe(usb3_ep, usb3_req, USB3_PN_WRITE)) + usb3_clear_bit(usb3, PN_INT_BFRDY, USB3_PN_INT_ENA); + } else { + if (!usb3_read_pipe(usb3_ep, usb3_req, USB3_PN_READ)) + usb3_request_done_pipen(usb3, usb3_ep, usb3_req, 0); + } +} + +static void usb3_irq_epc_pipen(struct renesas_usb3 *usb3, int num) +{ + u32 pn_int_sta; + + if (usb3_pn_change(usb3, num) < 0) + return; + + pn_int_sta = usb3_read(usb3, USB3_PN_INT_STA); + pn_int_sta &= usb3_read(usb3, USB3_PN_INT_ENA); + usb3_write(usb3, pn_int_sta, USB3_PN_INT_STA); + if (pn_int_sta & PN_INT_LSTTR) + usb3_irq_epc_pipen_lsttr(usb3, num); + if (pn_int_sta & PN_INT_BFRDY) + usb3_irq_epc_pipen_bfrdy(usb3, num); +} + +static void usb3_irq_epc_int_2(struct renesas_usb3 *usb3, u32 int_sta_2) +{ + int i; + + for (i = 0; i < usb3->num_usb3_eps; i++) { + if (int_sta_2 & USB_INT_2_PIPE(i)) { + if (!i) + usb3_irq_epc_pipe0(usb3); + else + usb3_irq_epc_pipen(usb3, i); + } + } +} + +static void usb3_irq_epc(struct renesas_usb3 *usb3) +{ + u32 int_sta_1 = usb3_read(usb3, USB3_USB_INT_STA_1); + u32 int_sta_2 = usb3_read(usb3, USB3_USB_INT_STA_2); + + int_sta_1 &= usb3_read(usb3, USB3_USB_INT_ENA_1); + if (int_sta_1) { + usb3_write(usb3, int_sta_1, USB3_USB_INT_STA_1); + usb3_irq_epc_int_1(usb3, int_sta_1); + } + + int_sta_2 &= usb3_read(usb3, USB3_USB_INT_ENA_2); + if (int_sta_2) + usb3_irq_epc_int_2(usb3, int_sta_2); +} + +static irqreturn_t renesas_usb3_irq(int irq, void *_usb3) +{ + struct renesas_usb3 *usb3 = _usb3; + irqreturn_t ret = IRQ_NONE; + u32 axi_int_sta = usb3_read(usb3, USB3_AXI_INT_STA); + + if (axi_int_sta & AXI_INT_EPCINT) { + usb3_irq_epc(usb3); + ret = IRQ_HANDLED; + } + + return ret; +} + +static void usb3_write_pn_mod(struct renesas_usb3_ep *usb3_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + u32 val = 0; + + val |= usb3_ep->dir_in ? PN_MOD_DIR : 0; + val |= PN_MOD_TYPE(usb_endpoint_type(desc)); + val |= PN_MOD_EPNUM(usb_endpoint_num(desc)); + usb3_write(usb3, val, USB3_PN_MOD); +} + +static u32 usb3_calc_ramarea(int ram_size) +{ + WARN_ON(ram_size > SZ_16K); + + if (ram_size <= SZ_1K) + return PN_RAMMAP_RAMAREA_1KB; + else if (ram_size <= SZ_2K) + return PN_RAMMAP_RAMAREA_2KB; + else if (ram_size <= SZ_4K) + return PN_RAMMAP_RAMAREA_4KB; + else if (ram_size <= SZ_8K) + return PN_RAMMAP_RAMAREA_8KB; + else + return PN_RAMMAP_RAMAREA_16KB; +} + +static u32 usb3_calc_rammap_val(struct renesas_usb3_ep *usb3_ep, + const struct usb_endpoint_descriptor *desc) +{ + return usb3_ep->rammap_val | PN_RAMMAP_MPKT(usb_endpoint_maxp(desc)); +} + +static int usb3_enable_pipe_n(struct renesas_usb3_ep *usb3_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + usb3_ep->dir_in = usb_endpoint_dir_in(desc); + + spin_lock_irqsave(&usb3->lock, flags); + if (!usb3_pn_change(usb3, usb3_ep->num)) { + usb3_write_pn_mod(usb3_ep, desc); + usb3_write(usb3, usb3_calc_rammap_val(usb3_ep, desc), + USB3_PN_RAMMAP); + usb3_pn_con_clear(usb3); + usb3_set_bit(usb3, PN_CON_EN, USB3_PN_CON); + } + spin_unlock_irqrestore(&usb3->lock, flags); + + return 0; +} + +static int usb3_disable_pipe_n(struct renesas_usb3_ep *usb3_ep) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + usb3_ep->halt = false; + + spin_lock_irqsave(&usb3->lock, flags); + if (!usb3_pn_change(usb3, usb3_ep->num)) { + usb3_write(usb3, 0, USB3_PN_RAMMAP); + usb3_clear_bit(usb3, PN_CON_EN, USB3_PN_CON); + } + spin_unlock_irqrestore(&usb3->lock, flags); + + return 0; +} + +/*------- usb_ep_ops -----------------------------------------------------*/ +static int renesas_usb3_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep); + + return usb3_enable_pipe_n(usb3_ep, desc); +} + +static int renesas_usb3_ep_disable(struct usb_ep *_ep) +{ + struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep); + struct renesas_usb3_request *usb3_req; + + do { + usb3_req = usb3_get_request(usb3_ep); + if (!usb3_req) + break; + usb3_request_done(usb3_ep, usb3_req, -ESHUTDOWN); + } while (1); + + return usb3_disable_pipe_n(usb3_ep); +} + +static struct usb_request *__renesas_usb3_ep_alloc_request(gfp_t gfp_flags) +{ + struct renesas_usb3_request *usb3_req; + + usb3_req = kzalloc(sizeof(struct renesas_usb3_request), gfp_flags); + if (!usb3_req) + return NULL; + + INIT_LIST_HEAD(&usb3_req->queue); + + return &usb3_req->req; +} + +static void __renesas_usb3_ep_free_request(struct usb_request *_req) +{ + struct renesas_usb3_request *usb3_req = usb_req_to_usb3_req(_req); + + kfree(usb3_req); +} + +static struct usb_request *renesas_usb3_ep_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + return __renesas_usb3_ep_alloc_request(gfp_flags); +} + +static void renesas_usb3_ep_free_request(struct usb_ep *_ep, + struct usb_request *_req) +{ + __renesas_usb3_ep_free_request(_req); +} + +static int renesas_usb3_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep); + struct renesas_usb3_request *usb3_req = usb_req_to_usb3_req(_req); + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + + dev_dbg(usb3_to_dev(usb3), "ep_dequeue: ep%2d, %u\n", usb3_ep->num, + _req->length); + + usb3_request_done_pipen(usb3, usb3_ep, usb3_req, -ECONNRESET); + + return 0; +} + +static int renesas_usb3_ep_set_halt(struct usb_ep *_ep, int value) +{ + return usb3_set_halt(usb_ep_to_usb3_ep(_ep), !!value, false); +} + +static int renesas_usb3_ep_set_wedge(struct usb_ep *_ep) +{ + struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep); + + usb3_ep->wedge = true; + return usb3_set_halt(usb3_ep, true, false); +} + +static void renesas_usb3_ep_fifo_flush(struct usb_ep *_ep) +{ + struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep); + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + if (usb3_ep->num) { + spin_lock_irqsave(&usb3->lock, flags); + if (!usb3_pn_change(usb3, usb3_ep->num)) { + usb3_pn_con_clear(usb3); + usb3_set_bit(usb3, PN_CON_EN, USB3_PN_CON); + } + spin_unlock_irqrestore(&usb3->lock, flags); + } else { + usb3_p0_con_clear_buffer(usb3); + } +} + +static struct usb_ep_ops renesas_usb3_ep_ops = { + .enable = renesas_usb3_ep_enable, + .disable = renesas_usb3_ep_disable, + + .alloc_request = renesas_usb3_ep_alloc_request, + .free_request = renesas_usb3_ep_free_request, + + .queue = renesas_usb3_ep_queue, + .dequeue = renesas_usb3_ep_dequeue, + + .set_halt = renesas_usb3_ep_set_halt, + .set_wedge = renesas_usb3_ep_set_wedge, + .fifo_flush = renesas_usb3_ep_fifo_flush, +}; + +/*------- usb_gadget_ops -------------------------------------------------*/ +static int renesas_usb3_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct renesas_usb3 *usb3; + + if (!driver || driver->max_speed < USB_SPEED_FULL || + !driver->setup) + return -EINVAL; + + usb3 = gadget_to_renesas_usb3(gadget); + + /* hook up the driver */ + usb3->driver = driver; + + renesas_usb3_init_controller(usb3); + + return 0; +} + +static int renesas_usb3_stop(struct usb_gadget *gadget) +{ + struct renesas_usb3 *usb3 = gadget_to_renesas_usb3(gadget); + unsigned long flags; + + spin_lock_irqsave(&usb3->lock, flags); + usb3->softconnect = false; + usb3->gadget.speed = USB_SPEED_UNKNOWN; + usb3->driver = NULL; + renesas_usb3_stop_controller(usb3); + spin_unlock_irqrestore(&usb3->lock, flags); + + return 0; +} + +static int renesas_usb3_get_frame(struct usb_gadget *_gadget) +{ + return -EOPNOTSUPP; +} + +static int renesas_usb3_pullup(struct usb_gadget *gadget, int is_on) +{ + struct renesas_usb3 *usb3 = gadget_to_renesas_usb3(gadget); + + usb3->softconnect = !!is_on; + + return 0; +} + +static int renesas_usb3_set_selfpowered(struct usb_gadget *gadget, int is_self) +{ + gadget->is_selfpowered = !!is_self; + + return 0; +} + +static const struct usb_gadget_ops renesas_usb3_gadget_ops = { + .get_frame = renesas_usb3_get_frame, + .udc_start = renesas_usb3_start, + .udc_stop = renesas_usb3_stop, + .pullup = renesas_usb3_pullup, + .set_selfpowered = renesas_usb3_set_selfpowered, +}; + +/*------- platform_driver ------------------------------------------------*/ +static int renesas_usb3_remove(struct platform_device *pdev) +{ + struct renesas_usb3 *usb3 = platform_get_drvdata(pdev); + + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + usb_del_gadget_udc(&usb3->gadget); + + __renesas_usb3_ep_free_request(usb3->ep0_req); + + return 0; +} + +static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev, + const struct renesas_usb3_priv *priv) +{ + struct renesas_usb3_ep *usb3_ep; + int i; + + /* calculate num_usb3_eps from renesas_usb3_priv */ + usb3->num_usb3_eps = priv->ramsize_per_ramif * priv->num_ramif * 2 / + priv->ramsize_per_pipe + 1; + + if (usb3->num_usb3_eps > USB3_MAX_NUM_PIPES) + usb3->num_usb3_eps = USB3_MAX_NUM_PIPES; + + usb3->usb3_ep = devm_kzalloc(dev, sizeof(*usb3_ep) * usb3->num_usb3_eps, + GFP_KERNEL); + if (!usb3->usb3_ep) + return -ENOMEM; + + dev_dbg(dev, "%s: num_usb3_eps = %d\n", __func__, usb3->num_usb3_eps); + /* + * This driver prepares pipes as the followings: + * - odd pipes = IN pipe + * - even pipes = OUT pipe (except pipe 0) + */ + usb3_for_each_ep(usb3_ep, usb3, i) { + snprintf(usb3_ep->ep_name, sizeof(usb3_ep->ep_name), "ep%d", i); + usb3_ep->usb3 = usb3; + usb3_ep->num = i; + usb3_ep->ep.name = usb3_ep->ep_name; + usb3_ep->ep.ops = &renesas_usb3_ep_ops; + INIT_LIST_HEAD(&usb3_ep->queue); + INIT_LIST_HEAD(&usb3_ep->ep.ep_list); + if (!i) { + /* for control pipe */ + usb3->gadget.ep0 = &usb3_ep->ep; + usb_ep_set_maxpacket_limit(&usb3_ep->ep, + USB3_EP0_HSFS_MAX_PACKET_SIZE); + usb3_ep->ep.caps.type_control = true; + usb3_ep->ep.caps.dir_in = true; + usb3_ep->ep.caps.dir_out = true; + continue; + } + + /* for bulk or interrupt pipe */ + usb_ep_set_maxpacket_limit(&usb3_ep->ep, ~0); + list_add_tail(&usb3_ep->ep.ep_list, &usb3->gadget.ep_list); + usb3_ep->ep.caps.type_bulk = true; + usb3_ep->ep.caps.type_int = true; + if (i & 1) + usb3_ep->ep.caps.dir_in = true; + else + usb3_ep->ep.caps.dir_out = true; + } + + return 0; +} + +static void renesas_usb3_init_ram(struct renesas_usb3 *usb3, struct device *dev, + const struct renesas_usb3_priv *priv) +{ + struct renesas_usb3_ep *usb3_ep; + int i; + u32 ramif[2], basead[2]; /* index 0 = for IN pipes */ + u32 *cur_ramif, *cur_basead; + u32 val; + + memset(ramif, 0, sizeof(ramif)); + memset(basead, 0, sizeof(basead)); + + /* + * This driver prepares pipes as the followings: + * - all pipes = the same size as "ramsize_per_pipe" + * Please refer to the "Method of Specifying RAM Mapping" + */ + usb3_for_each_ep(usb3_ep, usb3, i) { + if (!i) + continue; /* out of scope if ep num = 0 */ + if (usb3_ep->ep.caps.dir_in) { + cur_ramif = &ramif[0]; + cur_basead = &basead[0]; + } else { + cur_ramif = &ramif[1]; + cur_basead = &basead[1]; + } + + if (*cur_basead > priv->ramsize_per_ramif) + continue; /* out of memory for IN or OUT pipe */ + + /* calculate rammap_val */ + val = PN_RAMMAP_RAMIF(*cur_ramif); + val |= usb3_calc_ramarea(priv->ramsize_per_pipe); + val |= PN_RAMMAP_BASEAD(*cur_basead); + usb3_ep->rammap_val = val; + + dev_dbg(dev, "ep%2d: val = %08x, ramif = %d, base = %x\n", + i, val, *cur_ramif, *cur_basead); + + /* update current ramif */ + if (*cur_ramif + 1 == priv->num_ramif) { + *cur_ramif = 0; + *cur_basead += priv->ramsize_per_pipe; + } else { + (*cur_ramif)++; + } + } +} + +static const struct renesas_usb3_priv renesas_usb3_priv_r8a7795 = { + .ramsize_per_ramif = SZ_16K, + .num_ramif = 2, + .ramsize_per_pipe = SZ_4K, + .workaround_for_vbus = true, +}; + +static const struct of_device_id usb3_of_match[] = { + { + .compatible = "renesas,r8a7795-usb3-peri", + .data = &renesas_usb3_priv_r8a7795, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, usb3_of_match); + +static int renesas_usb3_probe(struct platform_device *pdev) +{ + struct renesas_usb3 *usb3; + struct resource *res; + const struct of_device_id *match; + int irq, ret; + const struct renesas_usb3_priv *priv; + + match = of_match_node(usb3_of_match, pdev->dev.of_node); + if (!match) + return -ENODEV; + priv = match->data; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -ENODEV; + + usb3 = devm_kzalloc(&pdev->dev, sizeof(*usb3), GFP_KERNEL); + if (!usb3) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + usb3->reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(usb3->reg)) + return PTR_ERR(usb3->reg); + + platform_set_drvdata(pdev, usb3); + spin_lock_init(&usb3->lock); + + usb3->gadget.ops = &renesas_usb3_gadget_ops; + usb3->gadget.name = udc_name; + usb3->gadget.max_speed = USB_SPEED_SUPER; + INIT_LIST_HEAD(&usb3->gadget.ep_list); + ret = renesas_usb3_init_ep(usb3, &pdev->dev, priv); + if (ret < 0) + return ret; + renesas_usb3_init_ram(usb3, &pdev->dev, priv); + + ret = devm_request_irq(&pdev->dev, irq, renesas_usb3_irq, 0, + dev_name(&pdev->dev), usb3); + if (ret < 0) + return ret; + + /* for ep0 handling */ + usb3->ep0_req = __renesas_usb3_ep_alloc_request(GFP_KERNEL); + if (!usb3->ep0_req) + return -ENOMEM; + + ret = usb_add_gadget_udc(&pdev->dev, &usb3->gadget); + if (ret < 0) + goto err_add_udc; + + usb3->workaround_for_vbus = priv->workaround_for_vbus; + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + dev_info(&pdev->dev, "probed\n"); + + return 0; + +err_add_udc: + __renesas_usb3_ep_free_request(usb3->ep0_req); + + return ret; +} + +static struct platform_driver renesas_usb3_driver = { + .probe = renesas_usb3_probe, + .remove = renesas_usb3_remove, + .driver = { + .name = (char *)udc_name, + .of_match_table = of_match_ptr(usb3_of_match), + }, +}; +module_platform_driver(renesas_usb3_driver); + +MODULE_DESCRIPTION("Renesas USB3.0 Peripheral driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Yoshihiro Shimoda "); +MODULE_ALIAS("platform:renesas_usb3"); -- cgit v1.2.3 From 2330770797afa822652b541d81a17f0e04bcf598 Mon Sep 17 00:00:00 2001 From: Hongtao Jia Date: Tue, 24 Nov 2015 14:52:44 +0800 Subject: dt-bindings: Add QorIQ TMU thermal bindings Add bindings documentation for TMU (Thermal Monitoring Unit) on QorIQ platform. Signed-off-by: Jia Hongtao Reviewed-by: Scott Wood Acked-by: Rob Herring Signed-off-by: Scott Wood --- .../devicetree/bindings/thermal/qoriq-thermal.txt | 63 ++++++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/qoriq-thermal.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt new file mode 100644 index 000000000000..66223d561972 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt @@ -0,0 +1,63 @@ +* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs + +Required properties: +- compatible : Must include "fsl,qoriq-tmu". The version of the device is + determined by the TMU IP Block Revision Register (IPBRR0) at + offset 0x0BF8. + Table of correspondences between IPBRR0 values and example chips: + Value Device + ---------- ----- + 0x01900102 T1040 +- reg : Address range of TMU registers. +- interrupts : Contains the interrupt for TMU. +- fsl,tmu-range : The values to be programmed into TTRnCR, as specified by + the SoC reference manual. The first cell is TTR0CR, the second is + TTR1CR, etc. +- fsl,tmu-calibration : A list of cell pairs containing temperature + calibration data, as specified by the SoC reference manual. + The first cell of each pair is the value to be written to TTCFGR, + and the second is the value to be written to TSCFGR. + +Example: + +tmu@f0000 { + compatible = "fsl,qoriq-tmu"; + reg = <0xf0000 0x1000>; + interrupts = <18 2 0 0>; + fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>; + fsl,tmu-calibration = <0x00000000 0x00000025 + 0x00000001 0x00000028 + 0x00000002 0x0000002d + 0x00000003 0x00000031 + 0x00000004 0x00000036 + 0x00000005 0x0000003a + 0x00000006 0x00000040 + 0x00000007 0x00000044 + 0x00000008 0x0000004a + 0x00000009 0x0000004f + 0x0000000a 0x00000054 + + 0x00010000 0x0000000d + 0x00010001 0x00000013 + 0x00010002 0x00000019 + 0x00010003 0x0000001f + 0x00010004 0x00000025 + 0x00010005 0x0000002d + 0x00010006 0x00000033 + 0x00010007 0x00000043 + 0x00010008 0x0000004b + 0x00010009 0x00000053 + + 0x00020000 0x00000010 + 0x00020001 0x00000017 + 0x00020002 0x0000001f + 0x00020003 0x00000029 + 0x00020004 0x00000031 + 0x00020005 0x0000003c + 0x00020006 0x00000042 + 0x00020007 0x0000004d + 0x00020008 0x00000056 + + 0x00030000 0x00000012 + 0x00030001 0x0000001d>; +}; -- cgit v1.2.3 From 3a35d59a69398b3b522d449404669624486d2b68 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 3 Nov 2015 16:21:20 +0800 Subject: usb: chipidea: clean up CONFIG_USB_CHIPIDEA_DEBUG reference Since this configuration option has deleted, cleans up all its references. Signed-off-by: Peter Chen Reported-by: Valentin Rothberg --- Documentation/usb/chipidea.txt | 4 ++-- drivers/usb/chipidea/core.c | 1 - 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt index 3f848c1f2940..05f735a1b5a5 100644 --- a/Documentation/usb/chipidea.txt +++ b/Documentation/usb/chipidea.txt @@ -7,8 +7,8 @@ with 2 Freescale i.MX6Q sabre SD boards. --------------------------------------- Select CONFIG_USB_OTG_FSM, rebuild kernel Image and modules. If you want to check some internal variables for otg fsm, -select CONFIG_USB_CHIPIDEA_DEBUG, there are 2 files which -can show otg fsm variables and some controller registers value: +mount debugfs, there are 2 files which can show otg fsm +variables and some controller registers value: cat /sys/kernel/debug/ci_hdrc.0/otg cat /sys/kernel/debug/ci_hdrc.0/registers diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 18e77e02842b..3a237d03260c 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -23,7 +23,6 @@ * - BUS: bus glue code, bus abstraction layer * * Compile Options - * - CONFIG_USB_CHIPIDEA_DEBUG: enable debug facilities * - STALL_IN: non-empty bulk-in pipes cannot be halted * if defined mass storage compliance succeeds but with warnings * => case 4: Hi > Dn -- cgit v1.2.3 From 5c5e09f623d5984532a74b90d3d24e1caa99bc9f Mon Sep 17 00:00:00 2001 From: Leilk Liu Date: Thu, 31 Dec 2015 10:59:03 +0800 Subject: spi: mtk: Add bindings for mediatek MT2701 soc platform This patch adds a DT binding documentation for the MT2701 soc. Signed-off-by: Leilk Liu Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/spi-mt65xx.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index 60a183c16e6e..e43f4cf4cf35 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -2,9 +2,10 @@ Binding for MTK SPI controller Required properties: - compatible: should be one of the following. - - mediatek,mt8173-spi: for mt8173 platforms - - mediatek,mt8135-spi: for mt8135 platforms + - mediatek,mt2701-spi: for mt2701 platforms - mediatek,mt6589-spi: for mt6589 platforms + - mediatek,mt8135-spi: for mt8135 platforms + - mediatek,mt8173-spi: for mt8173 platforms - #address-cells: should be 1. -- cgit v1.2.3 From 0c739738a0eea868655ef26263d5350e6ab8cc69 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 23 Dec 2015 17:56:32 +0100 Subject: i2c: document binding for multi-master case We need this binding because some I2C master drivers will need to adapt their PM settings for the arbitration circuitry. Acked-by: Geert Uytterhoeven Acked-by: Rob Herring Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index a00219f5ee07..c8d977ed847f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -54,6 +54,11 @@ wants to support one of the below features, it should adapt the bindings below. "irq" and "wakeup" names are recognized by I2C core, other names are left to individual drivers. +- multi-master + states that there is another master active on this bus. The OS can use + this information to adapt power management to keep the arbitration awake + all the time, for example. + - wakeup-source device can be used as a wakeup source. -- cgit v1.2.3 From e2e5a2c618373b55bbb2eca2a6e535dddd04412c Mon Sep 17 00:00:00 2001 From: Kamal Dasu Date: Wed, 16 Dec 2015 15:49:09 -0500 Subject: i2c: brcmstb: Adding support for CM and DSL SoCs Broadcoms DSL, CM (cable modem)and STB I2C core implementation have 8 data in/out registers that can transfer 8 bytes or 32 bytes max. Cable and DSL "Peripheral" i2c cores use single byte per data register and the STB can use 4 byte per data register transfer. Adding support to take care of this difference. Accordingly added the compatible string for SoCs using the "Peripheral" I2C block. Signed-off-by: Kamal Dasu Reviewed-by: Florian Fainelli Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-brcmstb.txt | 2 +- drivers/i2c/busses/i2c-brcmstb.c | 80 +++++++++++++++------- 2 files changed, 57 insertions(+), 25 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt index d6f724efdcf2..aeceaceba3c5 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt @@ -2,7 +2,7 @@ Broadcom stb bsc iic master controller Required properties: -- compatible: should be "brcm,brcmstb-i2c" +- compatible: should be "brcm,brcmstb-i2c" or "brcm,brcmper-i2c" - clock-frequency: 32-bit decimal value of iic master clock freqency in Hz valid values are 375000, 390000, 187500, 200000 93750, 97500, 46875 and 50000 diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c index 8e9637eea512..3711df1d4526 100644 --- a/drivers/i2c/busses/i2c-brcmstb.c +++ b/drivers/i2c/busses/i2c-brcmstb.c @@ -25,13 +25,16 @@ #include #define N_DATA_REGS 8 -#define N_DATA_BYTES (N_DATA_REGS * 4) -/* BSC count register field definitions */ -#define BSC_CNT_REG1_MASK 0x0000003f -#define BSC_CNT_REG1_SHIFT 0 -#define BSC_CNT_REG2_MASK 0x00000fc0 -#define BSC_CNT_REG2_SHIFT 6 +/* + * PER_I2C/BSC count register mask depends on 1 byte/4 byte data register + * size. Cable modem and DSL SoCs with Peripheral i2c cores use 1 byte per + * data register whereas STB SoCs use 4 byte per data register transfer, + * account for this difference in total count per transaction and mask to + * use. + */ +#define BSC_CNT_REG1_MASK(nb) (nb == 1 ? GENMASK(3, 0) : GENMASK(5, 0)) +#define BSC_CNT_REG1_SHIFT 0 /* BSC CTL register field definitions */ #define BSC_CTL_REG_DTF_MASK 0x00000003 @@ -41,7 +44,7 @@ #define BSC_CTL_REG_INT_EN_SHIFT 6 #define BSC_CTL_REG_DIV_CLK_MASK 0x00000080 -/* BSC_IIC_ENABLE r/w enable and interrupt field defintions */ +/* BSC_IIC_ENABLE r/w enable and interrupt field definitions */ #define BSC_IIC_EN_RESTART_MASK 0x00000040 #define BSC_IIC_EN_NOSTART_MASK 0x00000020 #define BSC_IIC_EN_NOSTOP_MASK 0x00000010 @@ -169,6 +172,7 @@ struct brcmstb_i2c_dev { struct completion done; bool is_suspended; u32 clk_freq_hz; + int data_regsz; }; /* register accessors for both be and le cpu arch */ @@ -186,6 +190,16 @@ struct brcmstb_i2c_dev { #define bsc_writel(_dev, _val, _reg) \ __bsc_writel(_val, _dev->base + offsetof(struct bsc_regs, _reg)) +static inline int brcmstb_i2c_get_xfersz(struct brcmstb_i2c_dev *dev) +{ + return (N_DATA_REGS * dev->data_regsz); +} + +static inline int brcmstb_i2c_get_data_regsz(struct brcmstb_i2c_dev *dev) +{ + return dev->data_regsz; +} + static void brcmstb_i2c_enable_disable_irq(struct brcmstb_i2c_dev *dev, bool int_en) { @@ -323,14 +337,16 @@ static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev, u8 *buf, unsigned int len, struct i2c_msg *pmsg) { - int cnt, byte, rc; + int cnt, byte, i, rc; enum bsc_xfer_cmd cmd; u32 ctl_reg; struct bsc_regs *pi2creg = dev->bsc_regmap; int no_ack = pmsg->flags & I2C_M_IGNORE_NAK; + int data_regsz = brcmstb_i2c_get_data_regsz(dev); + int xfersz = brcmstb_i2c_get_xfersz(dev); /* see if the transaction needs to check NACK conditions */ - if (no_ack || len <= N_DATA_BYTES) { + if (no_ack || len <= xfersz) { cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD_NOACK : CMD_WR_NOACK; pi2creg->ctlhi_reg |= BSC_CTLHI_REG_IGNORE_ACK_MASK; @@ -348,20 +364,22 @@ static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev, pi2creg->ctl_reg = ctl_reg | DTF_RD_MASK; /* set the read/write length */ - bsc_writel(dev, BSC_CNT_REG1_MASK & (len << BSC_CNT_REG1_SHIFT), - cnt_reg); + bsc_writel(dev, BSC_CNT_REG1_MASK(data_regsz) & + (len << BSC_CNT_REG1_SHIFT), cnt_reg); /* Write data into data_in register */ + if (cmd == CMD_WR || cmd == CMD_WR_NOACK) { - for (cnt = 0; cnt < len; cnt += 4) { + for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) { u32 word = 0; - for (byte = 0; byte < 4; byte++) { - word >>= 8; + for (byte = 0; byte < data_regsz; byte++) { + word >>= BITS_PER_BYTE; if ((cnt + byte) < len) - word |= buf[cnt + byte] << 24; + word |= buf[cnt + byte] << + (BITS_PER_BYTE * (data_regsz - 1)); } - bsc_writel(dev, word, data_in[cnt >> 2]); + bsc_writel(dev, word, data_in[i]); } } @@ -373,14 +391,15 @@ static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev, return rc; } + /* Read data from data_out register */ if (cmd == CMD_RD || cmd == CMD_RD_NOACK) { - for (cnt = 0; cnt < len; cnt += 4) { - u32 data = bsc_readl(dev, data_out[cnt >> 2]); + for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) { + u32 data = bsc_readl(dev, data_out[i]); - for (byte = 0; byte < 4 && + for (byte = 0; byte < data_regsz && (byte + cnt) < len; byte++) { buf[cnt + byte] = data & 0xff; - data >>= 8; + data >>= BITS_PER_BYTE; } } } @@ -448,6 +467,7 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter, int bytes_to_xfer; u8 *tmp_buf; int len = 0; + int xfersz = brcmstb_i2c_get_xfersz(dev); if (dev->is_suspended) return -EBUSY; @@ -482,9 +502,9 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter, /* Perform data transfer */ while (len) { - bytes_to_xfer = min(len, N_DATA_BYTES); + bytes_to_xfer = min(len, xfersz); - if (len <= N_DATA_BYTES && i == (num - 1)) + if (len <= xfersz && i == (num - 1)) brcmstb_set_i2c_start_stop(dev, ~(COND_START_STOP)); @@ -542,8 +562,12 @@ static void brcmstb_i2c_set_bus_speed(struct brcmstb_i2c_dev *dev) static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev) { - /* 4 byte data register */ - dev->bsc_regmap->ctlhi_reg = BSC_CTLHI_REG_DATAREG_SIZE_MASK; + if (brcmstb_i2c_get_data_regsz(dev) == sizeof(u32)) + /* set 4 byte data in/out xfers */ + dev->bsc_regmap->ctlhi_reg = BSC_CTLHI_REG_DATAREG_SIZE_MASK; + else + dev->bsc_regmap->ctlhi_reg &= ~BSC_CTLHI_REG_DATAREG_SIZE_MASK; + bsc_writel(dev, dev->bsc_regmap->ctlhi_reg, ctlhi_reg); /* set bus speed */ brcmstb_i2c_set_bus_speed(dev); @@ -608,6 +632,13 @@ static int brcmstb_i2c_probe(struct platform_device *pdev) dev->clk_freq_hz = bsc_clk[0].hz; } + /* set the data in/out register size for compatible SoCs */ + if (of_device_is_compatible(dev->device->of_node, + "brcmstb,brcmper-i2c")) + dev->data_regsz = sizeof(u8); + else + dev->data_regsz = sizeof(u32); + brcmstb_i2c_set_bsc_reg_defaults(dev); /* Add the i2c adapter */ @@ -674,6 +705,7 @@ static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend, static const struct of_device_id brcmstb_i2c_of_match[] = { {.compatible = "brcm,brcmstb-i2c"}, + {.compatible = "brcm,brcmper-i2c"}, {}, }; MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match); -- cgit v1.2.3 From 414ee536dfb51373c6c4c74dd7a7a65abdf5af51 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 15 Dec 2015 10:55:59 +0100 Subject: ARM: psci: Fix indentation in DT bindings Fix bogus indentation of the PSCI compatible values, reformat. Signed-off-by: Geert Uytterhoeven Acked-by: Lorenzo Pieralisi Acked-by: Mark Rutland Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/psci.txt | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/psci.txt b/Documentation/devicetree/bindings/arm/psci.txt index a9adab84e2fe..a2c4f1d52492 100644 --- a/Documentation/devicetree/bindings/arm/psci.txt +++ b/Documentation/devicetree/bindings/arm/psci.txt @@ -23,17 +23,20 @@ Main node required properties: - compatible : should contain at least one of: - * "arm,psci" : for implementations complying to PSCI versions prior to - 0.2. For these cases function IDs must be provided. - - * "arm,psci-0.2" : for implementations complying to PSCI 0.2. Function - IDs are not required and should be ignored by an OS with PSCI 0.2 - support, but are permitted to be present for compatibility with - existing software when "arm,psci" is later in the compatible list. - - * "arm,psci-1.0" : for implementations complying to PSCI 1.0. PSCI 1.0 is - backward compatible with PSCI 0.2 with minor specification updates, - as defined in the PSCI specification[2]. + * "arm,psci" : For implementations complying to PSCI versions prior + to 0.2. + For these cases function IDs must be provided. + + * "arm,psci-0.2" : For implementations complying to PSCI 0.2. + Function IDs are not required and should be ignored by + an OS with PSCI 0.2 support, but are permitted to be + present for compatibility with existing software when + "arm,psci" is later in the compatible list. + + * "arm,psci-1.0" : For implementations complying to PSCI 1.0. + PSCI 1.0 is backward compatible with PSCI 0.2 with + minor specification updates, as defined in the PSCI + specification[2]. - method : The method of calling the PSCI firmware. Permitted values are: -- cgit v1.2.3 From dc17340e3041511850ff6ec7299551284d6c0eb1 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Sat, 26 Dec 2015 00:37:16 +0100 Subject: Fix documentation for adp1653 DT MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Property names do not match real names needed by driver itself. This patch fix this problem. Signed-off-by: Pali Rohár Acked-by: Pavel Machek Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/media/i2c/adp1653.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/media/i2c/adp1653.txt b/Documentation/devicetree/bindings/media/i2c/adp1653.txt index 5ce66f2104e3..4cce0de40ee9 100644 --- a/Documentation/devicetree/bindings/media/i2c/adp1653.txt +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt @@ -12,12 +12,13 @@ There are two LED outputs available - flash and indicator. One LED is represented by one child node, nodes need to be named "flash" and "indicator". Required properties of the LED child node: -- max-microamp : see Documentation/devicetree/bindings/leds/common.txt +- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt Required properties of the flash LED child node: - flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt +- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt Example: @@ -29,9 +30,9 @@ Example: flash { flash-timeout-us = <500000>; flash-max-microamp = <320000>; - max-microamp = <50000>; + led-max-microamp = <50000>; }; indicator { - max-microamp = <17500>; + led-max-microamp = <17500>; }; }; -- cgit v1.2.3 From d323ef0f1a3e6d408eabacf0e91e2d741ffe1165 Mon Sep 17 00:00:00 2001 From: Guoqing Jiang Date: Mon, 21 Dec 2015 10:51:00 +1100 Subject: md-cluster: update the documentation Update design documentation based on recent development. original version comes from Neil. Signed-off-by: Goldwyn Rodrigues Signed-off-by: Guoqing Jiang Signed-off-by: NeilBrown --- Documentation/md-cluster.txt | 314 +++++++++++++++++++++++++++++++------------ 1 file changed, 228 insertions(+), 86 deletions(-) (limited to 'Documentation') diff --git a/Documentation/md-cluster.txt b/Documentation/md-cluster.txt index 1b794369e03a..c100c7163507 100644 --- a/Documentation/md-cluster.txt +++ b/Documentation/md-cluster.txt @@ -3,7 +3,7 @@ The cluster MD is a shared-device RAID for a cluster. 1. On-disk format -Separate write-intent-bitmap are used for each cluster node. +Separate write-intent-bitmaps are used for each cluster node. The bitmaps record all writes that may have been started on that node, and may not yet have finished. The on-disk layout is: @@ -14,117 +14,161 @@ and may not yet have finished. The on-disk layout is: | bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits | | bm bits [3, contd] | | | -During "normal" functioning we assume the filesystem ensures that only one -node writes to any given block at a time, so a write -request will +During "normal" functioning we assume the filesystem ensures that only +one node writes to any given block at a time, so a write request will + - set the appropriate bit (if not already set) - commit the write to all mirrors - schedule the bit to be cleared after a timeout. -Reads are just handled normally. It is up to the filesystem to -ensure one node doesn't read from a location where another node (or the same +Reads are just handled normally. It is up to the filesystem to ensure +one node doesn't read from a location where another node (or the same node) is writing. 2. DLM Locks for management -There are two locks for managing the device: +There are three groups of locks for managing the device: 2.1 Bitmap lock resource (bm_lockres) - The bm_lockres protects individual node bitmaps. They are named in the - form bitmap001 for node 1, bitmap002 for node and so on. When a node - joins the cluster, it acquires the lock in PW mode and it stays so - during the lifetime the node is part of the cluster. The lock resource - number is based on the slot number returned by the DLM subsystem. Since - DLM starts node count from one and bitmap slots start from zero, one is - subtracted from the DLM slot number to arrive at the bitmap slot number. + The bm_lockres protects individual node bitmaps. They are named in + the form bitmap000 for node 1, bitmap001 for node 2 and so on. When a + node joins the cluster, it acquires the lock in PW mode and it stays + so during the lifetime the node is part of the cluster. The lock + resource number is based on the slot number returned by the DLM + subsystem. Since DLM starts node count from one and bitmap slots + start from zero, one is subtracted from the DLM slot number to arrive + at the bitmap slot number. + + The LVB of the bitmap lock for a particular node records the range + of sectors that are being re-synced by that node. No other + node may write to those sectors. This is used when a new nodes + joins the cluster. + +2.2 Message passing locks + + Each node has to communicate with other nodes when starting or ending + resync, and for metadata superblock updates. This communication is + managed through three locks: "token", "message", and "ack", together + with the Lock Value Block (LVB) of one of the "message" lock. + +2.3 new-device management + + A single lock: "no-new-dev" is used to co-ordinate the addition of + new devices - this must be synchronized across the array. + Normally all nodes hold a concurrent-read lock on this device. 3. Communication -Each node has to communicate with other nodes when starting or ending -resync, and metadata superblock updates. + Messages can be broadcast to all nodes, and the sender waits for all + other nodes to acknowledge the message before proceeding. Only one + message can be processed at a time. 3.1 Message Types - There are 3 types, of messages which are passed + There are six types of messages which are passed: - 3.1.1 METADATA_UPDATED: informs other nodes that the metadata has been - updated, and the node must re-read the md superblock. This is performed - synchronously. + 3.1.1 METADATA_UPDATED: informs other nodes that the metadata has + been updated, and the node must re-read the md superblock. This is + performed synchronously. It is primarily used to signal device + failure. - 3.1.2 RESYNC: informs other nodes that a resync is initiated or ended - so that each node may suspend or resume the region. + 3.1.2 RESYNCING: informs other nodes that a resync is initiated or + ended so that each node may suspend or resume the region. Each + RESYNCING message identifies a range of the devices that the + sending node is about to resync. This over-rides any pervious + notification from that node: only one ranged can be resynced at a + time per-node. + + 3.1.3 NEWDISK: informs other nodes that a device is being added to + the array. Message contains an identifier for that device. See + below for further details. + + 3.1.4 REMOVE: A failed or spare device is being removed from the + array. The slot-number of the device is included in the message. + + 3.1.5 RE_ADD: A failed device is being re-activated - the assumption + is that it has been determined to be working again. + + 3.1.6 BITMAP_NEEDS_SYNC: if a node is stopped locally but the bitmap + isn't clean, then another node is informed to take the ownership of + resync. 3.2 Communication mechanism The DLM LVB is used to communicate within nodes of the cluster. There are three resources used for the purpose: - 3.2.1 Token: The resource which protects the entire communication + 3.2.1 token: The resource which protects the entire communication system. The node having the token resource is allowed to communicate. - 3.2.2 Message: The lock resource which carries the data to + 3.2.2 message: The lock resource which carries the data to communicate. - 3.2.3 Ack: The resource, acquiring which means the message has been + 3.2.3 ack: The resource, acquiring which means the message has been acknowledged by all nodes in the cluster. The BAST of the resource - is used to inform the receive node that a node wants to communicate. + is used to inform the receiving node that a node wants to + communicate. The algorithm is: - 1. receive status + 1. receive status - all nodes have concurrent-reader lock on "ack". - sender receiver receiver - ACK:CR ACK:CR ACK:CR + sender receiver receiver + "ack":CR "ack":CR "ack":CR - 2. sender get EX of TOKEN - sender get EX of MESSAGE + 2. sender get EX on "token" + sender get EX on "message" sender receiver receiver - TOKEN:EX ACK:CR ACK:CR - MESSAGE:EX - ACK:CR + "token":EX "ack":CR "ack":CR + "message":EX + "ack":CR - Sender checks that it still needs to send a message. Messages received - or other events that happened while waiting for the TOKEN may have made - this message inappropriate or redundant. + Sender checks that it still needs to send a message. Messages + received or other events that happened while waiting for the + "token" may have made this message inappropriate or redundant. - 3. sender write LVB. - sender down-convert MESSAGE from EX to CW - sender try to get EX of ACK - [ wait until all receiver has *processed* the MESSAGE ] + 3. sender writes LVB. + sender down-convert "message" from EX to CW + sender try to get EX of "ack" + [ wait until all receivers have *processed* the "message" ] - [ triggered by bast of ACK ] - receiver get CR of MESSAGE + [ triggered by bast of "ack" ] + receiver get CR on "message" receiver read LVB receiver processes the message [ wait finish ] - receiver release ACK - - sender receiver receiver - TOKEN:EX MESSAGE:CR MESSAGE:CR - MESSAGE:CR - ACK:EX - - 4. triggered by grant of EX on ACK (indicating all receivers have processed - message) - sender down-convert ACK from EX to CR - sender release MESSAGE - sender release TOKEN - receiver upconvert to PR of MESSAGE - receiver get CR of ACK - receiver release MESSAGE + receiver releases "ack" + receiver tries to get PR on "message" + + sender receiver receiver + "token":EX "message":CR "message":CR + "message":CW + "ack":EX + + 4. triggered by grant of EX on "ack" (indicating all receivers + have processed message) + sender down-converts "ack" from EX to CR + sender releases "message" + sender releases "token" + receiver upconvert to PR on "message" + receiver get CR of "ack" + receiver release "message" sender receiver receiver - ACK:CR ACK:CR ACK:CR + "ack":CR "ack":CR "ack":CR 4. Handling Failures 4.1 Node Failure - When a node fails, the DLM informs the cluster with the slot. The node - starts a cluster recovery thread. The cluster recovery thread: + + When a node fails, the DLM informs the cluster with the slot + number. The node starts a cluster recovery thread. The cluster + recovery thread: + - acquires the bitmap lock of the failed node - opens the bitmap - reads the bitmap of the failed node @@ -132,45 +176,143 @@ The algorithm is: - cleans the bitmap of the failed node - releases bitmap lock of the failed node - initiates resync of the bitmap on the current node + md_check_recovery is invoked within recover_bitmaps, + then md_check_recovery -> metadata_update_start/finish, + it will lock the communication by lock_comm. + Which means when one node is resyncing it blocks all + other nodes from writing anywhere on the array. - The resync process, is the regular md resync. However, in a clustered + The resync process is the regular md resync. However, in a clustered environment when a resync is performed, it needs to tell other nodes of the areas which are suspended. Before a resync starts, the node - send out RESYNC_START with the (lo,hi) range of the area which needs - to be suspended. Each node maintains a suspend_list, which contains - the list of ranges which are currently suspended. On receiving - RESYNC_START, the node adds the range to the suspend_list. Similarly, - when the node performing resync finishes, it send RESYNC_FINISHED - to other nodes and other nodes remove the corresponding entry from - the suspend_list. + send out RESYNCING with the (lo,hi) range of the area which needs to + be suspended. Each node maintains a suspend_list, which contains the + list of ranges which are currently suspended. On receiving RESYNCING, + the node adds the range to the suspend_list. Similarly, when the node + performing resync finishes, it sends RESYNCING with an empty range to + other nodes and other nodes remove the corresponding entry from the + suspend_list. - A helper function, should_suspend() can be used to check if a particular - I/O range should be suspended or not. + A helper function, ->area_resyncing() can be used to check if a + particular I/O range should be suspended or not. 4.2 Device Failure + Device failures are handled and communicated with the metadata update - routine. + routine. When a node detects a device failure it does not allow + any further writes to that device until the failure has been + acknowledged by all other nodes. 5. Adding a new Device -For adding a new device, it is necessary that all nodes "see" the new device -to be added. For this, the following algorithm is used: + + For adding a new device, it is necessary that all nodes "see" the new + device to be added. For this, the following algorithm is used: 1. Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues - ioctl(ADD_NEW_DISC with disc.state set to MD_DISK_CLUSTER_ADD) - 2. Node 1 sends NEWDISK with uuid and slot number + ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CLUSTER_ADD) + 2. Node 1 sends a NEWDISK message with uuid and slot number 3. Other nodes issue kobject_uevent_env with uuid and slot number (Steps 4,5 could be a udev rule) 4. In userspace, the node searches for the disk, perhaps using blkid -t SUB_UUID="" - 5. Other nodes issue either of the following depending on whether the disk - was found: + 5. Other nodes issue either of the following depending on whether + the disk was found: ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CANDIDATE and - disc.number set to slot number) + disc.number set to slot number) ioctl(CLUSTERED_DISK_NACK) - 6. Other nodes drop lock on no-new-devs (CR) if device is found - 7. Node 1 attempts EX lock on no-new-devs - 8. If node 1 gets the lock, it sends METADATA_UPDATED after unmarking the disk - as SpareLocal - 9. If not (get no-new-dev lock), it fails the operation and sends METADATA_UPDATED - 10. Other nodes get the information whether a disk is added or not - by the following METADATA_UPDATED. + 6. Other nodes drop lock on "no-new-devs" (CR) if device is found + 7. Node 1 attempts EX lock on "no-new-dev" + 8. If node 1 gets the lock, it sends METADATA_UPDATED after + unmarking the disk as SpareLocal + 9. If not (get "no-new-dev" lock), it fails the operation and sends + METADATA_UPDATED. + 10. Other nodes get the information whether a disk is added or not + by the following METADATA_UPDATED. + +6. Module interface. + + There are 17 call-backs which the md core can make to the cluster + module. Understanding these can give a good overview of the whole + process. + +6.1 join(nodes) and leave() + + These are called when an array is started with a clustered bitmap, + and when the array is stopped. join() ensures the cluster is + available and initializes the various resources. + Only the first 'nodes' nodes in the cluster can use the array. + +6.2 slot_number() + + Reports the slot number advised by the cluster infrastructure. + Range is from 0 to nodes-1. + +6.3 resync_info_update() + + This updates the resync range that is stored in the bitmap lock. + The starting point is updated as the resync progresses. The + end point is always the end of the array. + It does *not* send a RESYNCING message. + +6.4 resync_start(), resync_finish() + + These are called when resync/recovery/reshape starts or stops. + They update the resyncing range in the bitmap lock and also + send a RESYNCING message. resync_start reports the whole + array as resyncing, resync_finish reports none of it. + + resync_finish() also sends a BITMAP_NEEDS_SYNC message which + allows some other node to take over. + +6.5 metadata_update_start(), metadata_update_finish(), + metadata_update_cancel(). + + metadata_update_start is used to get exclusive access to + the metadata. If a change is still needed once that access is + gained, metadata_update_finish() will send a METADATA_UPDATE + message to all other nodes, otherwise metadata_update_cancel() + can be used to release the lock. + +6.6 area_resyncing() + + This combines two elements of functionality. + + Firstly, it will check if any node is currently resyncing + anything in a given range of sectors. If any resync is found, + then the caller will avoid writing or read-balancing in that + range. + + Secondly, while node recovery is happening it reports that + all areas are resyncing for READ requests. This avoids races + between the cluster-filesystem and the cluster-RAID handling + a node failure. + +6.7 add_new_disk_start(), add_new_disk_finish(), new_disk_ack() + + These are used to manage the new-disk protocol described above. + When a new device is added, add_new_disk_start() is called before + it is bound to the array and, if that succeeds, add_new_disk_finish() + is called the device is fully added. + + When a device is added in acknowledgement to a previous + request, or when the device is declared "unavailable", + new_disk_ack() is called. + +6.8 remove_disk() + + This is called when a spare or failed device is removed from + the array. It causes a REMOVE message to be send to other nodes. + +6.9 gather_bitmaps() + + This sends a RE_ADD message to all other nodes and then + gathers bitmap information from all bitmaps. This combined + bitmap is then used to recovery the re-added device. + +6.10 lock_all_bitmaps() and unlock_all_bitmaps() + + These are called when change bitmap to none. If a node plans + to clear the cluster raid's bitmap, it need to make sure no other + nodes are using the raid which is achieved by lock all bitmap + locks within the cluster, and also those locks are unlocked + accordingly. -- cgit v1.2.3 From 6f357de854a6dfb9ce0d5d65f3971cf3d0a4af6f Mon Sep 17 00:00:00 2001 From: Alex Smith Date: Mon, 4 Jan 2016 12:34:42 +0000 Subject: doc: dt: mtd: new binding for jz4780-{nand,bch} Add DT bindings for NAND devices connected to the NEMC on JZ4780 SoCs, as well as the hardware BCH controller, used by the jz4780_{nand,bch} drivers. Signed-off-by: Alex Smith Cc: Zubair Lutfullah Kakakhel Cc: David Woodhouse Cc: linux-mtd@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Harvey Hunt Acked-by: Rob Herring Reviewed-by: Boris Brezillon Signed-off-by: Brian Norris --- .../bindings/mtd/ingenic,jz4780-nand.txt | 86 ++++++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt new file mode 100644 index 000000000000..29ea5853ca91 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt @@ -0,0 +1,86 @@ +* Ingenic JZ4780 NAND/BCH + +This file documents the device tree bindings for NAND flash devices on the +JZ4780. NAND devices are connected to the NEMC controller (described in +memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must +be children of the NEMC node. + +Required NAND controller device properties: +- compatible: Should be set to "ingenic,jz4780-nand". +- reg: For each bank with a NAND chip attached, should specify a bank number, + an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank). + +Optional NAND controller device properties: +- ingenic,bch-controller: To make use of the hardware BCH controller, this + property must contain a phandle for the BCH controller node. The required + properties for this node are described below. If this is not specified, + software BCH will be used instead. + +Optional children nodes: +- Individual NAND chips are children of the NAND controller node. + +Required children node properties: +- reg: An integer ranging from 1 to 6 representing the CS line to use. + +Optional children node properties: +- nand-ecc-step-size: ECC block size in bytes. +- nand-ecc-strength: ECC strength (max number of correctable bits). +- nand-ecc-mode: String, operation mode of the NAND ecc mode. "hw" by default +- nand-on-flash-bbt: boolean to enable on flash bbt option, if not present false +- rb-gpios: GPIO specifier for the busy pin. +- wp-gpios: GPIO specifier for the write protect pin. + +Optional child node of NAND chip nodes: +- partitions: see Documentation/devicetree/bindings/mtd/partition.txt + +Example: + +nemc: nemc@13410000 { + ... + + nandc: nand-controller@1 { + compatible = "ingenic,jz4780-nand"; + reg = <1 0 0x1000000>; /* Bank 1 */ + + #address-cells = <1>; + #size-cells = <0>; + + ingenic,bch-controller = <&bch>; + + nand@1 { + reg = <1>; + + nand-ecc-step-size = <1024>; + nand-ecc-strength = <24>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + + rb-gpios = <&gpa 20 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpf 22 GPIO_ACTIVE_LOW>; + + partitions { + #address-cells = <2>; + #size-cells = <2>; + ... + } + }; + }; +}; + +The BCH controller is a separate SoC component used for error correction on +NAND devices. The following is a description of the device properties for a +BCH controller. + +Required BCH properties: +- compatible: Should be set to "ingenic,jz4780-bch". +- reg: Should specify the BCH controller registers location and length. +- clocks: Clock for the BCH controller. + +Example: + +bch: bch@134d0000 { + compatible = "ingenic,jz4780-bch"; + reg = <0x134d0000 0x10000>; + + clocks = <&cgu JZ4780_CLK_BCH>; +}; -- cgit v1.2.3 From 3b78fae793c027140cfe635ef216bf60aa6498f4 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 4 Jan 2016 15:37:42 -0600 Subject: tty: amba-pl011: use iotype instead of access_32b to track 32-bit I/O Instead of defining a new field in the uart_amba_port structure, use the existing iotype field of the uart_port structure, which is intended for this purpose. If we need to use 32-bit register access, we set iotype to UPIO_MEM32, otherwise we set it to UPIO_MEM. For early console, specify the "mmio32" option on the kernel command-line. Example: earlycon=pl011,mmio32,0x3ced1000 Signed-off-by: Timur Tabi Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 5 ++++- drivers/tty/serial/amba-pl011.c | 16 +++++++++------- 2 files changed, 13 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 054e11d33b6b..654c547b9fc9 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1003,10 +1003,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. unspecified, the h/w is not initialized. pl011, + pl011,mmio32, Start an early, polled-mode console on a pl011 serial port at the specified address. The pl011 serial port must already be setup and configured. Options are not - yet supported. + yet supported. If 'mmio32' is specified, then only + the driver will use only 32-bit accessors to read/write + the device registers. msm_serial, Start an early, polled-mode console on an msm serial diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index a7d7ab05dc64..c0da0ccbbcf5 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -238,7 +238,6 @@ struct uart_amba_port { unsigned int fifosize; /* vendor-specific */ unsigned int old_cr; /* state during shutdown */ bool autorts; - bool access_32b; unsigned int fixed_baud; /* vendor-set fixed baud rate */ char type[12]; #ifdef CONFIG_DMA_ENGINE @@ -262,7 +261,8 @@ static unsigned int pl011_read(const struct uart_amba_port *uap, { void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg); - return uap->access_32b ? readl_relaxed(addr) : readw_relaxed(addr); + return (uap->port.iotype == UPIO_MEM32) ? + readl_relaxed(addr) : readw_relaxed(addr); } static void pl011_write(unsigned int val, const struct uart_amba_port *uap, @@ -270,7 +270,7 @@ static void pl011_write(unsigned int val, const struct uart_amba_port *uap, { void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg); - if (uap->access_32b) + if (uap->port.iotype == UPIO_MEM32) writel_relaxed(val, addr); else writew_relaxed(val, addr); @@ -2303,7 +2303,10 @@ static void pl011_putc(struct uart_port *port, int c) { while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF) ; - writeb(c, port->membase + UART01x_DR); + if (port->iotype == UPIO_MEM32) + writel(c, port->membase + UART01x_DR); + else + writeb(c, port->membase + UART01x_DR); while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY) ; } @@ -2416,7 +2419,6 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap, uap->port.dev = dev; uap->port.mapbase = mmiobase->start; uap->port.membase = base; - uap->port.iotype = UPIO_MEM; uap->port.fifosize = uap->fifosize; uap->port.flags = UPF_BOOT_AUTOCONF; uap->port.line = index; @@ -2470,9 +2472,9 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) return PTR_ERR(uap->clk); uap->reg_offset = vendor->reg_offset; - uap->access_32b = vendor->access_32b; uap->vendor = vendor; uap->fifosize = vendor->get_fifosize(dev); + uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; uap->port.irq = dev->irq[0]; uap->port.ops = &amba_pl011_pops; @@ -2551,9 +2553,9 @@ static int sbsa_uart_probe(struct platform_device *pdev) return -ENOMEM; uap->reg_offset = vendor_sbsa.reg_offset; - uap->access_32b = vendor_sbsa.access_32b; uap->vendor = &vendor_sbsa; uap->fifosize = 32; + uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM; uap->port.irq = platform_get_irq(pdev, 0); uap->port.ops = &sbsa_uart_pops; uap->fixed_baud = baudrate; -- cgit v1.2.3 From fa5b0bfa26d54b9b94e5c2ff9c826d1e12d6ad3a Mon Sep 17 00:00:00 2001 From: Akshay Bhat Date: Wed, 23 Dec 2015 13:38:58 -0500 Subject: DT: i2c: trivial-devices: Add Epson RX8010 and MPL3115 Signed-off-by: Akshay Bhat Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/trivial-devices.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index c50cf13c852e..1f25fba604e8 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -49,11 +49,13 @@ dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O dallas,ds75 Digital Thermometer and Thermostat dlg,da9053 DA9053: flexible system level PMIC with multicore support dlg,da9063 DA9063: system PMIC for quad-core application processors +epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51 fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer +fsl,mpl3115 MPL3115: Absolute Digital Pressure Sensor fsl,mpr121 MPR121: Proximity Capacitive Touch Sensor Controller fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface -- cgit v1.2.3 From f5e12d0d5bd4d2bc028bf3dda1732bde3824a008 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 7 Jan 2016 21:50:59 +0100 Subject: dt-bindings: move I2C eeprom descriptions to the proper file EEPROMs can have additional properties, so they are not suitable for trivial-devices.txt. Move most bindings to the designated eeprom.txt. Add the missing "atmel,24c08" while doing that. Note that the remaining ones in trivial-devices need to be dealt with separately because of improper manufacturer names. Signed-off-by: Wolfram Sang Acked-by: Rob Herring Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/eeprom/eeprom.txt | 19 ++++++++++++++----- .../devicetree/bindings/i2c/trivial-devices.txt | 13 ------------- 2 files changed, 14 insertions(+), 18 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt index 4342c10de1bf..acb600399c3d 100644 --- a/Documentation/devicetree/bindings/eeprom/eeprom.txt +++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt @@ -2,11 +2,20 @@ EEPROMs (I2C) Required properties: - - compatible : should be "," - If there is no specific driver for , a generic - driver based on is selected. Possible types are: - 24c00, 24c01, 24c02, 24c04, 24c08, 24c16, 24c32, 24c64, - 24c128, 24c256, 24c512, 24c1024, spd + - compatible : should be ",", like these: + + "atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04", + "atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64", + "atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024" + + "catalyst,24c32" + + "ramtron,24c64" + + If there is no specific driver for , a generic + driver based on is selected. Possible types are: + "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64", + "24c128", "24c256", "24c512", "24c1024", "spd" - reg : the I2C address of the EEPROM diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 1f25fba604e8..f0568a6448c9 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -21,21 +21,9 @@ adi,adt7490 +/-1C TDM Extended Temp Range I.C adi,adxl345 Three-Axis Digital Accelerometer adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) at,24c08 i2c serial eeprom (24cxx) -atmel,24c00 i2c serial eeprom (24cxx) -atmel,24c01 i2c serial eeprom (24cxx) -atmel,24c02 i2c serial eeprom (24cxx) -atmel,24c04 i2c serial eeprom (24cxx) -atmel,24c16 i2c serial eeprom (24cxx) -atmel,24c32 i2c serial eeprom (24cxx) -atmel,24c64 i2c serial eeprom (24cxx) -atmel,24c128 i2c serial eeprom (24cxx) -atmel,24c256 i2c serial eeprom (24cxx) -atmel,24c512 i2c serial eeprom (24cxx) -atmel,24c1024 i2c serial eeprom (24cxx) atmel,at97sc3204t i2c trusted platform module (TPM) capella,cm32181 CM32181: Ambient Light Sensor capella,cm3232 CM3232: Ambient Light Sensor -catalyst,24c32 i2c serial eeprom cirrus,cs42l51 Cirrus Logic CS42L51 audio codec dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock dallas,ds1338 I2C RTC with 56-Byte NV RAM @@ -82,7 +70,6 @@ ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI an pericom,pt7c4338 Real-time Clock Module plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch pulsedlight,lidar-lite-v2 Pulsedlight LIDAR range-finding sensor -ramtron,24c64 i2c serial eeprom (24cxx) ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC -- cgit v1.2.3 From a570a27af4d781619dfb5139f3b760e964373c29 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 7 Jan 2016 21:51:00 +0100 Subject: dt-bindings: i2c: eeprom: add another EEPROM device Signed-off-by: Wolfram Sang Acked-by: Rob Herring Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/eeprom/eeprom.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt index acb600399c3d..735bc94444bb 100644 --- a/Documentation/devicetree/bindings/eeprom/eeprom.txt +++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt @@ -12,6 +12,8 @@ Required properties: "ramtron,24c64" + "renesas,r1ex24002" + If there is no specific driver for , a generic driver based on is selected. Possible types are: "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64", -- cgit v1.2.3 From db2fb60cd35d2d03699e570906ced73b4c05586e Mon Sep 17 00:00:00 2001 From: Damien Riegel Date: Mon, 30 Nov 2015 10:59:47 -0500 Subject: mfd: syscon: Add a DT property to set value width Currently syscon has a fixed configuration of 32 bits for register and values widths. In some cases, it would be desirable to be able to customize the value width. For example, certain boards (like the ones manufactured by Technologic Systems) have a FPGA that is memory-mapped, but its registers are only 16-bit wide. This patch adds an optional "reg-io-width" DT binding for syscon that allows to change the width for the data bus (i.e. val_bits). If this property is provided, it will also set the register stride to reg-io-width's value. If not provided, the default configuration is used. Signed-off-by: Damien Riegel Acked-by: Rob Herring Acked-by: Arnd Bergmann Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/syscon.txt | 4 ++++ drivers/mfd/syscon.c | 13 +++++++++++++ 2 files changed, 17 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt index fe8150bb3248..408f768686f1 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.txt +++ b/Documentation/devicetree/bindings/mfd/syscon.txt @@ -13,6 +13,10 @@ Required properties: - compatible: Should contain "syscon". - reg: the register region can be accessed from syscon +Optional property: +- reg-io-width: the size (in bytes) of the IO accesses that should be + performed on the device. + Examples: gpr: iomuxc-gpr@020e0000 { compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index 176bf0fa2685..b7aabeefab07 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -47,6 +47,7 @@ static struct syscon *of_syscon_register(struct device_node *np) struct syscon *syscon; struct regmap *regmap; void __iomem *base; + u32 reg_io_width; int ret; struct regmap_config syscon_config = syscon_regmap_config; @@ -69,6 +70,18 @@ static struct syscon *of_syscon_register(struct device_node *np) else if (of_property_read_bool(np, "little-endian")) syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE; + /* + * search for reg-io-width property in DT. If it is not provided, + * default to 4 bytes. regmap_init_mmio will return an error if values + * are invalid so there is no need to check them here. + */ + ret = of_property_read_u32(np, "reg-io-width", ®_io_width); + if (ret) + reg_io_width = 4; + + syscon_config.reg_stride = reg_io_width; + syscon_config.val_bits = reg_io_width * 8; + regmap = regmap_init_mmio(NULL, base, &syscon_config); if (IS_ERR(regmap)) { pr_err("regmap init failed\n"); -- cgit v1.2.3 From a5dca7dc7e80f0cb4dcc9251983fb51745541f48 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 14 Dec 2015 10:19:12 +0000 Subject: mfd: arizona: Update binding docs for selecting mono/stereo outputs Update the device tree binding documentation to include the wlf,out-mono property that is used to specify whether each output is a mono or stereo output. Signed-off-by: Charles Keepax Acked-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/arizona.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 2b6ccdb32bd9..069e31da18f0 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -65,6 +65,12 @@ Optional properties: that have not been specified are set to 0 by default. Entries are: (wm5102, wm5110, wm8280, wm8997) (wm8998, wm1814) + - wlf,out-mono : A list of boolean values indicating whether each output is + mono or stereo. Position within the list indicates the output affected + (eg. First entry in the list corresponds to output 1). A non-zero value + indicates a mono output. If present, the number of values should be less + than or equal to the number of outputs, if less values are supplied the + additional outputs will be treated as stereo. - wlf,dmic-ref : DMIC reference voltage source for each input, can be selected from either MICVDD or one of the MICBIAS's, defines -- cgit v1.2.3 From 1809510715c4187fa7338204cac53e30326d5d04 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 6 Aug 2015 09:25:57 -0300 Subject: [media] media: get rid of unused "extra_links" param on media_entity_init() Currently, media_entity_init() creates an array with the links, allocated at init time. It provides a parameter (extra_links) that would allocate more links than the current needs, but this is not used by any driver. As we want to be able to do dynamic link allocation/removal, we'll need to change the implementation of the links. So, before doing that, let's first remove that extra unused parameter, in order to cleanup the interface first. Signed-off-by: Mauro Carvalho Chehab Acked-by: Sakari Ailus Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- Documentation/media-framework.txt | 7 +++---- Documentation/video4linux/v4l2-framework.txt | 4 ++-- Documentation/zh_CN/video4linux/v4l2-framework.txt | 4 ++-- drivers/media/dvb-core/dvbdev.c | 2 +- drivers/media/dvb-frontends/au8522_decoder.c | 2 +- drivers/media/i2c/ad9389b.c | 2 +- drivers/media/i2c/adp1653.c | 2 +- drivers/media/i2c/adv7180.c | 2 +- drivers/media/i2c/adv7511.c | 2 +- drivers/media/i2c/adv7604.c | 2 +- drivers/media/i2c/adv7842.c | 2 +- drivers/media/i2c/as3645a.c | 2 +- drivers/media/i2c/cx25840/cx25840-core.c | 2 +- drivers/media/i2c/lm3560.c | 2 +- drivers/media/i2c/lm3646.c | 2 +- drivers/media/i2c/m5mols/m5mols_core.c | 2 +- drivers/media/i2c/mt9m032.c | 2 +- drivers/media/i2c/mt9p031.c | 2 +- drivers/media/i2c/mt9t001.c | 2 +- drivers/media/i2c/mt9v032.c | 2 +- drivers/media/i2c/noon010pc30.c | 2 +- drivers/media/i2c/ov2659.c | 2 +- drivers/media/i2c/ov9650.c | 2 +- drivers/media/i2c/s5c73m3/s5c73m3-core.c | 4 ++-- drivers/media/i2c/s5k4ecgx.c | 2 +- drivers/media/i2c/s5k5baf.c | 4 ++-- drivers/media/i2c/s5k6a3.c | 2 +- drivers/media/i2c/s5k6aa.c | 2 +- drivers/media/i2c/smiapp/smiapp-core.c | 4 ++-- drivers/media/i2c/tc358743.c | 2 +- drivers/media/i2c/tvp514x.c | 2 +- drivers/media/i2c/tvp7002.c | 2 +- drivers/media/media-entity.c | 18 ++++++++---------- drivers/media/platform/exynos4-is/fimc-capture.c | 4 ++-- drivers/media/platform/exynos4-is/fimc-isp-video.c | 2 +- drivers/media/platform/exynos4-is/fimc-isp.c | 2 +- drivers/media/platform/exynos4-is/fimc-lite.c | 4 ++-- drivers/media/platform/exynos4-is/fimc-m2m.c | 2 +- drivers/media/platform/exynos4-is/mipi-csis.c | 2 +- drivers/media/platform/omap3isp/ispccdc.c | 2 +- drivers/media/platform/omap3isp/ispccp2.c | 2 +- drivers/media/platform/omap3isp/ispcsi2.c | 2 +- drivers/media/platform/omap3isp/isppreview.c | 2 +- drivers/media/platform/omap3isp/ispresizer.c | 2 +- drivers/media/platform/omap3isp/ispstat.c | 2 +- drivers/media/platform/omap3isp/ispvideo.c | 2 +- drivers/media/platform/s3c-camif/camif-capture.c | 4 ++-- drivers/media/platform/vsp1/vsp1_entity.c | 2 +- drivers/media/platform/vsp1/vsp1_video.c | 2 +- drivers/media/platform/xilinx/xilinx-dma.c | 2 +- drivers/media/platform/xilinx/xilinx-tpg.c | 2 +- drivers/media/usb/au0828/au0828-video.c | 4 ++-- drivers/media/usb/cx231xx/cx231xx-video.c | 4 ++-- drivers/media/usb/uvc/uvc_entity.c | 4 ++-- drivers/media/v4l2-core/tuner-core.c | 2 +- drivers/media/v4l2-core/v4l2-flash-led-class.c | 2 +- drivers/staging/media/davinci_vpfe/dm365_ipipe.c | 2 +- drivers/staging/media/davinci_vpfe/dm365_ipipeif.c | 2 +- drivers/staging/media/davinci_vpfe/dm365_isif.c | 2 +- drivers/staging/media/davinci_vpfe/dm365_resizer.c | 6 +++--- drivers/staging/media/davinci_vpfe/vpfe_video.c | 2 +- drivers/staging/media/omap4iss/iss_csi2.c | 2 +- drivers/staging/media/omap4iss/iss_ipipe.c | 2 +- drivers/staging/media/omap4iss/iss_ipipeif.c | 2 +- drivers/staging/media/omap4iss/iss_resizer.c | 2 +- drivers/staging/media/omap4iss/iss_video.c | 2 +- include/media/media-entity.h | 2 +- 67 files changed, 89 insertions(+), 92 deletions(-) (limited to 'Documentation') diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt index f552a75c0e70..6903b2503577 100644 --- a/Documentation/media-framework.txt +++ b/Documentation/media-framework.txt @@ -104,7 +104,7 @@ although drivers can allocate entities directly. Drivers initialize entities by calling media_entity_init(struct media_entity *entity, u16 num_pads, - struct media_pad *pads, u16 extra_links); + struct media_pad *pads); The media_entity name, type, flags, revision and group_id fields can be initialized before or after calling media_entity_init. Entities embedded in @@ -120,9 +120,8 @@ media_entity_init. The function will initialize the other pads fields. Unlike the number of pads, the total number of links isn't always known in advance by the entity driver. As an initial estimate, media_entity_init -pre-allocates a number of links equal to the number of pads plus an optional -number of extra links. The links array will be reallocated if it grows beyond -the initial estimate. +pre-allocates a number of links equal to the number of pads. The links array +will be reallocated if it grows beyond the initial estimate. Drivers register entities with a media device by calling diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 75d5c18d689a..109cc3792534 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -300,7 +300,7 @@ calling media_entity_init(): struct media_pad *pads = &my_sd->pads; int err; - err = media_entity_init(&sd->entity, npads, pads, 0); + err = media_entity_init(&sd->entity, npads, pads); The pads array must have been previously initialized. There is no need to manually set the struct media_entity type and name fields, but the revision @@ -700,7 +700,7 @@ calling media_entity_init(): struct media_pad *pad = &my_vdev->pad; int err; - err = media_entity_init(&vdev->entity, 1, pad, 0); + err = media_entity_init(&vdev->entity, 1, pad); The pads array must have been previously initialized. There is no need to manually set the struct media_entity type and name fields. diff --git a/Documentation/zh_CN/video4linux/v4l2-framework.txt b/Documentation/zh_CN/video4linux/v4l2-framework.txt index 2b828e631e31..ff815cb92031 100644 --- a/Documentation/zh_CN/video4linux/v4l2-framework.txt +++ b/Documentation/zh_CN/video4linux/v4l2-framework.txt @@ -295,7 +295,7 @@ owner 域。若使用 i2c 辅助函数，这些都会帮你处理好。 struct media_pad *pads = &my_sd->pads; int err; - err = media_entity_init(&sd->entity, npads, pads, 0); + err = media_entity_init(&sd->entity, npads, pads); pads 数组必须预先初始化。无须手动设置 media_entity 的 type 和 name 域，但如有必要，revision 域必须初始化。 @@ -602,7 +602,7 @@ v4l2_file_operations 结构体是 file_operations 的一个子集。其主要 struct media_pad *pad = &my_vdev->pad; int err; - err = media_entity_init(&vdev->entity, 1, pad, 0); + err = media_entity_init(&vdev->entity, 1, pad); pads 数组必须预先初始化。没有必要手动设置 media_entity 的 type 和 name 域。 diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c index 13bb57f0457f..2fdcbb5f000a 100644 --- a/drivers/media/dvb-core/dvbdev.c +++ b/drivers/media/dvb-core/dvbdev.c @@ -249,7 +249,7 @@ static void dvb_register_media_device(struct dvb_device *dvbdev, } if (npads) - ret = media_entity_init(dvbdev->entity, npads, dvbdev->pads, 0); + ret = media_entity_init(dvbdev->entity, npads, dvbdev->pads); if (!ret) ret = media_device_register_entity(dvbdev->adapter->mdev, dvbdev->entity); diff --git a/drivers/media/dvb-frontends/au8522_decoder.c b/drivers/media/dvb-frontends/au8522_decoder.c index 0a8882cb23c3..580859c89da1 100644 --- a/drivers/media/dvb-frontends/au8522_decoder.c +++ b/drivers/media/dvb-frontends/au8522_decoder.c @@ -769,7 +769,7 @@ static int au8522_probe(struct i2c_client *client, sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_DECODER; ret = media_entity_init(&sd->entity, ARRAY_SIZE(state->pads), - state->pads, 0); + state->pads); if (ret < 0) { v4l_info(client, "failed to initialize media entity!\n"); return ret; diff --git a/drivers/media/i2c/ad9389b.c b/drivers/media/i2c/ad9389b.c index 0494a7896aa2..a02dc4925707 100644 --- a/drivers/media/i2c/ad9389b.c +++ b/drivers/media/i2c/ad9389b.c @@ -1158,7 +1158,7 @@ static int ad9389b_probe(struct i2c_client *client, const struct i2c_device_id * state->rgb_quantization_range_ctrl->is_private = true; state->pad.flags = MEDIA_PAD_FL_SINK; - err = media_entity_init(&sd->entity, 1, &state->pad, 0); + err = media_entity_init(&sd->entity, 1, &state->pad); if (err) goto err_hdl; diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c index f00745bbe471..07e46b5b849c 100644 --- a/drivers/media/i2c/adp1653.c +++ b/drivers/media/i2c/adp1653.c @@ -512,7 +512,7 @@ static int adp1653_probe(struct i2c_client *client, if (ret) goto free_and_quit; - ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0); + ret = media_entity_init(&flash->subdev.entity, 0, NULL); if (ret < 0) goto free_and_quit; diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c index 3c3c4bfe3866..0fca8677014c 100644 --- a/drivers/media/i2c/adv7180.c +++ b/drivers/media/i2c/adv7180.c @@ -1214,7 +1214,7 @@ static int adv7180_probe(struct i2c_client *client, state->pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.flags |= MEDIA_ENT_T_V4L2_SUBDEV_DECODER; - ret = media_entity_init(&sd->entity, 1, &state->pad, 0); + ret = media_entity_init(&sd->entity, 1, &state->pad); if (ret) goto err_free_ctrl; diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511.c index eeb2cd823c4d..cbcf81b1d29e 100644 --- a/drivers/media/i2c/adv7511.c +++ b/drivers/media/i2c/adv7511.c @@ -1482,7 +1482,7 @@ static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id * state->rgb_quantization_range_ctrl->is_private = true; state->pad.flags = MEDIA_PAD_FL_SINK; - err = media_entity_init(&sd->entity, 1, &state->pad, 0); + err = media_entity_init(&sd->entity, 1, &state->pad); if (err) goto err_hdl; diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 745286225655..c2df7e8053f3 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -3209,7 +3209,7 @@ static int adv76xx_probe(struct i2c_client *client, state->pads[state->source_pad].flags = MEDIA_PAD_FL_SOURCE; err = media_entity_init(&sd->entity, state->source_pad + 1, - state->pads, 0); + state->pads); if (err) goto err_work_queues; diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c index 69378e4914b6..b5013a937254 100644 --- a/drivers/media/i2c/adv7842.c +++ b/drivers/media/i2c/adv7842.c @@ -3309,7 +3309,7 @@ static int adv7842_probe(struct i2c_client *client, adv7842_delayed_work_enable_hotplug); state->pad.flags = MEDIA_PAD_FL_SOURCE; - err = media_entity_init(&sd->entity, 1, &state->pad, 0); + err = media_entity_init(&sd->entity, 1, &state->pad); if (err) goto err_work_queues; diff --git a/drivers/media/i2c/as3645a.c b/drivers/media/i2c/as3645a.c index 29a2e7034aa6..b83c7fc988ae 100644 --- a/drivers/media/i2c/as3645a.c +++ b/drivers/media/i2c/as3645a.c @@ -827,7 +827,7 @@ static int as3645a_probe(struct i2c_client *client, if (ret < 0) goto done; - ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0); + ret = media_entity_init(&flash->subdev.entity, 0, NULL); if (ret < 0) goto done; diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c index f2e2c34ddbbd..022ad5ae8869 100644 --- a/drivers/media/i2c/cx25840/cx25840-core.c +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -5214,7 +5214,7 @@ static int cx25840_probe(struct i2c_client *client, sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_DECODER; ret = media_entity_init(&sd->entity, ARRAY_SIZE(state->pads), - state->pads, 0); + state->pads); if (ret < 0) { v4l_info(client, "failed to initialize media entity!\n"); return ret; diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c index 19ecb8801064..91c1ed27a458 100644 --- a/drivers/media/i2c/lm3560.c +++ b/drivers/media/i2c/lm3560.c @@ -365,7 +365,7 @@ static int lm3560_subdev_init(struct lm3560_flash *flash, rval = lm3560_init_controls(flash, led_no); if (rval) goto err_out; - rval = media_entity_init(&flash->subdev_led[led_no].entity, 0, NULL, 0); + rval = media_entity_init(&flash->subdev_led[led_no].entity, 0, NULL); if (rval < 0) goto err_out; flash->subdev_led[led_no].entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; diff --git a/drivers/media/i2c/lm3646.c b/drivers/media/i2c/lm3646.c index 7fbe6ff1c4f4..a037616bbab0 100644 --- a/drivers/media/i2c/lm3646.c +++ b/drivers/media/i2c/lm3646.c @@ -282,7 +282,7 @@ static int lm3646_subdev_init(struct lm3646_flash *flash) rval = lm3646_init_controls(flash); if (rval) goto err_out; - rval = media_entity_init(&flash->subdev_led.entity, 0, NULL, 0); + rval = media_entity_init(&flash->subdev_led.entity, 0, NULL); if (rval < 0) goto err_out; flash->subdev_led.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c index f8993933416e..0788c1908f9c 100644 --- a/drivers/media/i2c/m5mols/m5mols_core.c +++ b/drivers/media/i2c/m5mols/m5mols_core.c @@ -975,7 +975,7 @@ static int m5mols_probe(struct i2c_client *client, sd->internal_ops = &m5mols_subdev_internal_ops; info->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&sd->entity, 1, &info->pad, 0); + ret = media_entity_init(&sd->entity, 1, &info->pad); if (ret < 0) return ret; sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; diff --git a/drivers/media/i2c/mt9m032.c b/drivers/media/i2c/mt9m032.c index 101cb26f9330..a2a450839ca1 100644 --- a/drivers/media/i2c/mt9m032.c +++ b/drivers/media/i2c/mt9m032.c @@ -799,7 +799,7 @@ static int mt9m032_probe(struct i2c_client *client, sensor->subdev.ctrl_handler = &sensor->ctrls; sensor->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&sensor->subdev.entity, 1, &sensor->pad, 0); + ret = media_entity_init(&sensor->subdev.entity, 1, &sensor->pad); if (ret < 0) goto error_ctrl; diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c index a3da0e977d0b..165f29cddca6 100644 --- a/drivers/media/i2c/mt9p031.c +++ b/drivers/media/i2c/mt9p031.c @@ -1112,7 +1112,7 @@ static int mt9p031_probe(struct i2c_client *client, mt9p031->subdev.internal_ops = &mt9p031_subdev_internal_ops; mt9p031->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&mt9p031->subdev.entity, 1, &mt9p031->pad, 0); + ret = media_entity_init(&mt9p031->subdev.entity, 1, &mt9p031->pad); if (ret < 0) goto done; diff --git a/drivers/media/i2c/mt9t001.c b/drivers/media/i2c/mt9t001.c index b28fdff1d310..7d3df84651d8 100644 --- a/drivers/media/i2c/mt9t001.c +++ b/drivers/media/i2c/mt9t001.c @@ -933,7 +933,7 @@ static int mt9t001_probe(struct i2c_client *client, mt9t001->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; mt9t001->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&mt9t001->subdev.entity, 1, &mt9t001->pad, 0); + ret = media_entity_init(&mt9t001->subdev.entity, 1, &mt9t001->pad); done: if (ret < 0) { diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c index 1dbbd23fdfb0..b4f0f042c6c3 100644 --- a/drivers/media/i2c/mt9v032.c +++ b/drivers/media/i2c/mt9v032.c @@ -1046,7 +1046,7 @@ static int mt9v032_probe(struct i2c_client *client, mt9v032->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; mt9v032->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&mt9v032->subdev.entity, 1, &mt9v032->pad, 0); + ret = media_entity_init(&mt9v032->subdev.entity, 1, &mt9v032->pad); if (ret < 0) goto err; diff --git a/drivers/media/i2c/noon010pc30.c b/drivers/media/i2c/noon010pc30.c index 69e4f3031d8b..2e614ad473f1 100644 --- a/drivers/media/i2c/noon010pc30.c +++ b/drivers/media/i2c/noon010pc30.c @@ -780,7 +780,7 @@ static int noon010_probe(struct i2c_client *client, info->pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; - ret = media_entity_init(&sd->entity, 1, &info->pad, 0); + ret = media_entity_init(&sd->entity, 1, &info->pad); if (ret < 0) goto np_err; diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c index 82c7ac1cc88e..ea95f854a519 100644 --- a/drivers/media/i2c/ov2659.c +++ b/drivers/media/i2c/ov2659.c @@ -1446,7 +1446,7 @@ static int ov2659_probe(struct i2c_client *client, #if defined(CONFIG_MEDIA_CONTROLLER) ov2659->pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; - ret = media_entity_init(&sd->entity, 1, &ov2659->pad, 0); + ret = media_entity_init(&sd->entity, 1, &ov2659->pad); if (ret < 0) { v4l2_ctrl_handler_free(&ov2659->ctrls); return ret; diff --git a/drivers/media/i2c/ov9650.c b/drivers/media/i2c/ov9650.c index 9fe9006474b2..b4c408f2a2b0 100644 --- a/drivers/media/i2c/ov9650.c +++ b/drivers/media/i2c/ov9650.c @@ -1501,7 +1501,7 @@ static int ov965x_probe(struct i2c_client *client, ov965x->pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; - ret = media_entity_init(&sd->entity, 1, &ov965x->pad, 0); + ret = media_entity_init(&sd->entity, 1, &ov965x->pad); if (ret < 0) return ret; diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c index 25f5e79dc9bc..381f903831f4 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c @@ -1691,7 +1691,7 @@ static int s5c73m3_probe(struct i2c_client *client, sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV; ret = media_entity_init(&sd->entity, S5C73M3_NUM_PADS, - state->sensor_pads, 0); + state->sensor_pads); if (ret < 0) return ret; @@ -1707,7 +1707,7 @@ static int s5c73m3_probe(struct i2c_client *client, oif_sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV; ret = media_entity_init(&oif_sd->entity, OIF_NUM_PADS, - state->oif_pads, 0); + state->oif_pads); if (ret < 0) return ret; diff --git a/drivers/media/i2c/s5k4ecgx.c b/drivers/media/i2c/s5k4ecgx.c index 6757aca2cdab..445a89e30949 100644 --- a/drivers/media/i2c/s5k4ecgx.c +++ b/drivers/media/i2c/s5k4ecgx.c @@ -962,7 +962,7 @@ static int s5k4ecgx_probe(struct i2c_client *client, priv->pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; - ret = media_entity_init(&sd->entity, 1, &priv->pad, 0); + ret = media_entity_init(&sd->entity, 1, &priv->pad); if (ret) return ret; diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c index 774e0d0c94cb..30a9ca62e034 100644 --- a/drivers/media/i2c/s5k5baf.c +++ b/drivers/media/i2c/s5k5baf.c @@ -1905,7 +1905,7 @@ static int s5k5baf_configure_subdevs(struct s5k5baf *state, state->cis_pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; - ret = media_entity_init(&sd->entity, NUM_CIS_PADS, &state->cis_pad, 0); + ret = media_entity_init(&sd->entity, NUM_CIS_PADS, &state->cis_pad); if (ret < 0) goto err; @@ -1920,7 +1920,7 @@ static int s5k5baf_configure_subdevs(struct s5k5baf *state, state->pads[PAD_CIS].flags = MEDIA_PAD_FL_SINK; state->pads[PAD_OUT].flags = MEDIA_PAD_FL_SOURCE; sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV; - ret = media_entity_init(&sd->entity, NUM_ISP_PADS, state->pads, 0); + ret = media_entity_init(&sd->entity, NUM_ISP_PADS, state->pads); if (!ret) return 0; diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c index b1b1574dfb95..2434a7944781 100644 --- a/drivers/media/i2c/s5k6a3.c +++ b/drivers/media/i2c/s5k6a3.c @@ -333,7 +333,7 @@ static int s5k6a3_probe(struct i2c_client *client, sensor->format.height = S5K6A3_DEFAULT_HEIGHT; sensor->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&sd->entity, 1, &sensor->pad, 0); + ret = media_entity_init(&sd->entity, 1, &sensor->pad); if (ret < 0) return ret; diff --git a/drivers/media/i2c/s5k6aa.c b/drivers/media/i2c/s5k6aa.c index 60aaff7190d2..31be29d25093 100644 --- a/drivers/media/i2c/s5k6aa.c +++ b/drivers/media/i2c/s5k6aa.c @@ -1578,7 +1578,7 @@ static int s5k6aa_probe(struct i2c_client *client, s5k6aa->pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; - ret = media_entity_init(&sd->entity, 1, &s5k6aa->pad, 0); + ret = media_entity_init(&sd->entity, 1, &s5k6aa->pad); if (ret) return ret; diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c index fb39dfd55e75..7ed0538ea8db 100644 --- a/drivers/media/i2c/smiapp/smiapp-core.c +++ b/drivers/media/i2c/smiapp/smiapp-core.c @@ -2488,7 +2488,7 @@ static int smiapp_register_subdevs(struct smiapp_sensor *sensor) continue; rval = media_entity_init(&this->sd.entity, - this->npads, this->pads, 0); + this->npads, this->pads); if (rval) { dev_err(&client->dev, "media_entity_init failed\n"); @@ -3078,7 +3078,7 @@ static int smiapp_probe(struct i2c_client *client, sensor->src->pads[0].flags = MEDIA_PAD_FL_SOURCE; rval = media_entity_init(&sensor->src->sd.entity, 2, - sensor->src->pads, 0); + sensor->src->pads); if (rval < 0) return rval; diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c index 77b801152ea5..78e5b644d400 100644 --- a/drivers/media/i2c/tc358743.c +++ b/drivers/media/i2c/tc358743.c @@ -1889,7 +1889,7 @@ static int tc358743_probe(struct i2c_client *client, } state->pad.flags = MEDIA_PAD_FL_SOURCE; - err = media_entity_init(&sd->entity, 1, &state->pad, 0); + err = media_entity_init(&sd->entity, 1, &state->pad); if (err < 0) goto err_hdl; diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c index b5dba5b7ce3a..11e426dbe891 100644 --- a/drivers/media/i2c/tvp514x.c +++ b/drivers/media/i2c/tvp514x.c @@ -1097,7 +1097,7 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) decoder->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; decoder->sd.entity.flags |= MEDIA_ENT_T_V4L2_SUBDEV_DECODER; - ret = media_entity_init(&decoder->sd.entity, 1, &decoder->pad, 0); + ret = media_entity_init(&decoder->sd.entity, 1, &decoder->pad); if (ret < 0) { v4l2_err(sd, "%s decoder driver failed to register !!\n", sd->name); diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c index 772a3043ae3b..a5ee2b8df429 100644 --- a/drivers/media/i2c/tvp7002.c +++ b/drivers/media/i2c/tvp7002.c @@ -1014,7 +1014,7 @@ static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id) device->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; device->sd.entity.flags |= MEDIA_ENT_T_V4L2_SUBDEV_DECODER; - error = media_entity_init(&device->sd.entity, 1, &device->pad, 0); + error = media_entity_init(&device->sd.entity, 1, &device->pad); if (error < 0) return error; #endif diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c index 767fe55ba08e..eabcbacfe387 100644 --- a/drivers/media/media-entity.c +++ b/drivers/media/media-entity.c @@ -30,32 +30,30 @@ * media_entity_init - Initialize a media entity * * @num_pads: Total number of sink and source pads. - * @extra_links: Initial estimate of the number of extra links. * @pads: Array of 'num_pads' pads. * * The total number of pads is an intrinsic property of entities known by the * entity driver, while the total number of links depends on hardware design * and is an extrinsic property unknown to the entity driver. However, in most - * use cases the entity driver can guess the number of links which can safely - * be assumed to be equal to or larger than the number of pads. + * use cases the number of links can safely be assumed to be equal to or + * larger than the number of pads. * - * For those reasons the links array can be preallocated based on the entity - * driver guess and will be reallocated later if extra links need to be - * created. + * For those reasons the links array can be preallocated based on the number + * of pads and will be reallocated later if extra links need to be created. * * This function allocates a links array with enough space to hold at least - * 'num_pads' + 'extra_links' elements. The media_entity::max_links field will - * be set to the number of allocated elements. + * 'num_pads' elements. The media_entity::max_links field will be set to the + * number of allocated elements. * * The pads array is managed by the entity driver and passed to * media_entity_init() where its pointer will be stored in the entity structure. */ int media_entity_init(struct media_entity *entity, u16 num_pads, - struct media_pad *pads, u16 extra_links) + struct media_pad *pads) { struct media_link *links; - unsigned int max_links = num_pads + extra_links; + unsigned int max_links = num_pads; unsigned int i; links = kzalloc(max_links * sizeof(links[0]), GFP_KERNEL); diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c index 0d549a6c8a13..8f5bee42783f 100644 --- a/drivers/media/platform/exynos4-is/fimc-capture.c +++ b/drivers/media/platform/exynos4-is/fimc-capture.c @@ -1800,7 +1800,7 @@ static int fimc_register_capture_device(struct fimc_dev *fimc, vid_cap->wb_fmt.code = fmt->mbus_code; vid_cap->vd_pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&vfd->entity, 1, &vid_cap->vd_pad, 0); + ret = media_entity_init(&vfd->entity, 1, &vid_cap->vd_pad); if (ret) goto err_free_ctx; @@ -1893,7 +1893,7 @@ int fimc_initialize_capture_subdev(struct fimc_dev *fimc) fimc->vid_cap.sd_pads[FIMC_SD_PAD_SINK_FIFO].flags = MEDIA_PAD_FL_SINK; fimc->vid_cap.sd_pads[FIMC_SD_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_init(&sd->entity, FIMC_SD_PADS_NUM, - fimc->vid_cap.sd_pads, 0); + fimc->vid_cap.sd_pads); if (ret) return ret; diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c index 0dd22ec66694..817226d52b74 100644 --- a/drivers/media/platform/exynos4-is/fimc-isp-video.c +++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c @@ -617,7 +617,7 @@ int fimc_isp_video_device_register(struct fimc_isp *isp, vdev->lock = &isp->video_lock; iv->pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&vdev->entity, 1, &iv->pad, 0); + ret = media_entity_init(&vdev->entity, 1, &iv->pad); if (ret < 0) return ret; diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c index 5d78f5716f3b..f52eebf765c1 100644 --- a/drivers/media/platform/exynos4-is/fimc-isp.c +++ b/drivers/media/platform/exynos4-is/fimc-isp.c @@ -709,7 +709,7 @@ int fimc_isp_subdev_create(struct fimc_isp *isp) isp->subdev_pads[FIMC_ISP_SD_PAD_SRC_FIFO].flags = MEDIA_PAD_FL_SOURCE; isp->subdev_pads[FIMC_ISP_SD_PAD_SRC_DMA].flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_init(&sd->entity, FIMC_ISP_SD_PADS_NUM, - isp->subdev_pads, 0); + isp->subdev_pads); if (ret) return ret; diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c index 639ee710499e..2ce670425cd9 100644 --- a/drivers/media/platform/exynos4-is/fimc-lite.c +++ b/drivers/media/platform/exynos4-is/fimc-lite.c @@ -1316,7 +1316,7 @@ static int fimc_lite_subdev_registered(struct v4l2_subdev *sd) return ret; fimc->vd_pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&vfd->entity, 1, &fimc->vd_pad, 0); + ret = media_entity_init(&vfd->entity, 1, &fimc->vd_pad); if (ret < 0) return ret; @@ -1431,7 +1431,7 @@ static int fimc_lite_create_capture_subdev(struct fimc_lite *fimc) fimc->subdev_pads[FLITE_SD_PAD_SOURCE_DMA].flags = MEDIA_PAD_FL_SOURCE; fimc->subdev_pads[FLITE_SD_PAD_SOURCE_ISP].flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_init(&sd->entity, FLITE_SD_PADS_NUM, - fimc->subdev_pads, 0); + fimc->subdev_pads); if (ret) return ret; diff --git a/drivers/media/platform/exynos4-is/fimc-m2m.c b/drivers/media/platform/exynos4-is/fimc-m2m.c index 5aa857c7b631..8ff4e6f76b84 100644 --- a/drivers/media/platform/exynos4-is/fimc-m2m.c +++ b/drivers/media/platform/exynos4-is/fimc-m2m.c @@ -739,7 +739,7 @@ int fimc_register_m2m_device(struct fimc_dev *fimc, return PTR_ERR(fimc->m2m.m2m_dev); } - ret = media_entity_init(&vfd->entity, 0, NULL, 0); + ret = media_entity_init(&vfd->entity, 0, NULL); if (ret) goto err_me; diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c index ff5dabf24694..8847797b0d0b 100644 --- a/drivers/media/platform/exynos4-is/mipi-csis.c +++ b/drivers/media/platform/exynos4-is/mipi-csis.c @@ -867,7 +867,7 @@ static int s5pcsis_probe(struct platform_device *pdev) state->pads[CSIS_PAD_SINK].flags = MEDIA_PAD_FL_SINK; state->pads[CSIS_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_init(&state->sd.entity, - CSIS_PADS_NUM, state->pads, 0); + CSIS_PADS_NUM, state->pads); if (ret < 0) goto e_clkdis; diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c index a6a61cce43dd..3b10304b580b 100644 --- a/drivers/media/platform/omap3isp/ispccdc.c +++ b/drivers/media/platform/omap3isp/ispccdc.c @@ -2650,7 +2650,7 @@ static int ccdc_init_entities(struct isp_ccdc_device *ccdc) pads[CCDC_PAD_SOURCE_OF].flags = MEDIA_PAD_FL_SOURCE; me->ops = &ccdc_media_ops; - ret = media_entity_init(me, CCDC_PADS_NUM, pads, 0); + ret = media_entity_init(me, CCDC_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/media/platform/omap3isp/ispccp2.c b/drivers/media/platform/omap3isp/ispccp2.c index 38e6a974c5b1..e1b5f5bea541 100644 --- a/drivers/media/platform/omap3isp/ispccp2.c +++ b/drivers/media/platform/omap3isp/ispccp2.c @@ -1071,7 +1071,7 @@ static int ccp2_init_entities(struct isp_ccp2_device *ccp2) pads[CCP2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; me->ops = &ccp2_media_ops; - ret = media_entity_init(me, CCP2_PADS_NUM, pads, 0); + ret = media_entity_init(me, CCP2_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/media/platform/omap3isp/ispcsi2.c b/drivers/media/platform/omap3isp/ispcsi2.c index a78338d012b4..6fff92f0813a 100644 --- a/drivers/media/platform/omap3isp/ispcsi2.c +++ b/drivers/media/platform/omap3isp/ispcsi2.c @@ -1245,7 +1245,7 @@ static int csi2_init_entities(struct isp_csi2_device *csi2) | MEDIA_PAD_FL_MUST_CONNECT; me->ops = &csi2_media_ops; - ret = media_entity_init(me, CSI2_PADS_NUM, pads, 0); + ret = media_entity_init(me, CSI2_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/media/platform/omap3isp/isppreview.c b/drivers/media/platform/omap3isp/isppreview.c index 13803270d104..b440c6342ca4 100644 --- a/drivers/media/platform/omap3isp/isppreview.c +++ b/drivers/media/platform/omap3isp/isppreview.c @@ -2282,7 +2282,7 @@ static int preview_init_entities(struct isp_prev_device *prev) pads[PREV_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; me->ops = &preview_media_ops; - ret = media_entity_init(me, PREV_PADS_NUM, pads, 0); + ret = media_entity_init(me, PREV_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/media/platform/omap3isp/ispresizer.c b/drivers/media/platform/omap3isp/ispresizer.c index 7cfb43dc0ffd..3deb1ec4a973 100644 --- a/drivers/media/platform/omap3isp/ispresizer.c +++ b/drivers/media/platform/omap3isp/ispresizer.c @@ -1728,7 +1728,7 @@ static int resizer_init_entities(struct isp_res_device *res) pads[RESZ_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; me->ops = &resizer_media_ops; - ret = media_entity_init(me, RESZ_PADS_NUM, pads, 0); + ret = media_entity_init(me, RESZ_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/media/platform/omap3isp/ispstat.c b/drivers/media/platform/omap3isp/ispstat.c index 94d4c295d3d0..f7a5eee9f11d 100644 --- a/drivers/media/platform/omap3isp/ispstat.c +++ b/drivers/media/platform/omap3isp/ispstat.c @@ -1028,7 +1028,7 @@ static int isp_stat_init_entities(struct ispstat *stat, const char *name, stat->pad.flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT; me->ops = NULL; - return media_entity_init(me, 1, &stat->pad, 0); + return media_entity_init(me, 1, &stat->pad); } int omap3isp_stat_init(struct ispstat *stat, const char *name, diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index ecadca3e945b..963cb9318873 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -1367,7 +1367,7 @@ int omap3isp_video_init(struct isp_video *video, const char *name) if (IS_ERR(video->alloc_ctx)) return PTR_ERR(video->alloc_ctx); - ret = media_entity_init(&video->video.entity, 1, &video->pad, 0); + ret = media_entity_init(&video->video.entity, 1, &video->pad); if (ret < 0) { vb2_dma_contig_cleanup_ctx(video->alloc_ctx); return ret; diff --git a/drivers/media/platform/s3c-camif/camif-capture.c b/drivers/media/platform/s3c-camif/camif-capture.c index ec3abbed87d9..a87ac16273a0 100644 --- a/drivers/media/platform/s3c-camif/camif-capture.c +++ b/drivers/media/platform/s3c-camif/camif-capture.c @@ -1144,7 +1144,7 @@ int s3c_camif_register_video_node(struct camif_dev *camif, int idx) goto err_vd_rel; vp->pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&vfd->entity, 1, &vp->pad, 0); + ret = media_entity_init(&vfd->entity, 1, &vp->pad); if (ret) goto err_vd_rel; @@ -1560,7 +1560,7 @@ int s3c_camif_create_subdev(struct camif_dev *camif) camif->pads[CAMIF_SD_PAD_SOURCE_P].flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_init(&sd->entity, CAMIF_SD_PADS_NUM, - camif->pads, 0); + camif->pads); if (ret) return ret; diff --git a/drivers/media/platform/vsp1/vsp1_entity.c b/drivers/media/platform/vsp1/vsp1_entity.c index fd95a75b04f4..619942ff2058 100644 --- a/drivers/media/platform/vsp1/vsp1_entity.c +++ b/drivers/media/platform/vsp1/vsp1_entity.c @@ -220,7 +220,7 @@ int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity, /* Initialize the media entity. */ return media_entity_init(&entity->subdev.entity, num_pads, - entity->pads, 0); + entity->pads); } void vsp1_entity_destroy(struct vsp1_entity *entity) diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c index 45eb65fa23db..fb52683b5c22 100644 --- a/drivers/media/platform/vsp1/vsp1_video.c +++ b/drivers/media/platform/vsp1/vsp1_video.c @@ -1193,7 +1193,7 @@ int vsp1_video_init(struct vsp1_video *video, struct vsp1_entity *rwpf) video->pipe.state = VSP1_PIPELINE_STOPPED; /* Initialize the media entity... */ - ret = media_entity_init(&video->video.entity, 1, &video->pad, 0); + ret = media_entity_init(&video->video.entity, 1, &video->pad); if (ret < 0) return ret; diff --git a/drivers/media/platform/xilinx/xilinx-dma.c b/drivers/media/platform/xilinx/xilinx-dma.c index 722758f33924..ce2d34df12ed 100644 --- a/drivers/media/platform/xilinx/xilinx-dma.c +++ b/drivers/media/platform/xilinx/xilinx-dma.c @@ -677,7 +677,7 @@ int xvip_dma_init(struct xvip_composite_device *xdev, struct xvip_dma *dma, dma->pad.flags = type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&dma->video.entity, 1, &dma->pad, 0); + ret = media_entity_init(&dma->video.entity, 1, &dma->pad); if (ret < 0) goto error; diff --git a/drivers/media/platform/xilinx/xilinx-tpg.c b/drivers/media/platform/xilinx/xilinx-tpg.c index 8bd7e3736019..c09ca513a9dc 100644 --- a/drivers/media/platform/xilinx/xilinx-tpg.c +++ b/drivers/media/platform/xilinx/xilinx-tpg.c @@ -838,7 +838,7 @@ static int xtpg_probe(struct platform_device *pdev) subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; subdev->entity.ops = &xtpg_media_ops; - ret = media_entity_init(&subdev->entity, xtpg->npads, xtpg->pads, 0); + ret = media_entity_init(&subdev->entity, xtpg->npads, xtpg->pads); if (ret < 0) goto error; diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c index 0b6e97d4fd94..57d7b9b45123 100644 --- a/drivers/media/usb/au0828/au0828-video.c +++ b/drivers/media/usb/au0828/au0828-video.c @@ -1887,12 +1887,12 @@ int au0828_analog_register(struct au0828_dev *dev, #if defined(CONFIG_MEDIA_CONTROLLER) dev->video_pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&dev->vdev.entity, 1, &dev->video_pad, 0); + ret = media_entity_init(&dev->vdev.entity, 1, &dev->video_pad); if (ret < 0) pr_err("failed to initialize video media entity!\n"); dev->vbi_pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&dev->vbi_dev.entity, 1, &dev->vbi_pad, 0); + ret = media_entity_init(&dev->vbi_dev.entity, 1, &dev->vbi_pad); if (ret < 0) pr_err("failed to initialize vbi media entity!\n"); #endif diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c index a70850fe6235..cbb28c912319 100644 --- a/drivers/media/usb/cx231xx/cx231xx-video.c +++ b/drivers/media/usb/cx231xx/cx231xx-video.c @@ -2177,7 +2177,7 @@ int cx231xx_register_analog_devices(struct cx231xx *dev) cx231xx_vdev_init(dev, &dev->vdev, &cx231xx_video_template, "video"); #if defined(CONFIG_MEDIA_CONTROLLER) dev->video_pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&dev->vdev.entity, 1, &dev->video_pad, 0); + ret = media_entity_init(&dev->vdev.entity, 1, &dev->video_pad); if (ret < 0) dev_err(dev->dev, "failed to initialize video media entity!\n"); #endif @@ -2204,7 +2204,7 @@ int cx231xx_register_analog_devices(struct cx231xx *dev) #if defined(CONFIG_MEDIA_CONTROLLER) dev->vbi_pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&dev->vbi_dev.entity, 1, &dev->vbi_pad, 0); + ret = media_entity_init(&dev->vbi_dev.entity, 1, &dev->vbi_pad); if (ret < 0) dev_err(dev->dev, "failed to initialize vbi media entity!\n"); #endif diff --git a/drivers/media/usb/uvc/uvc_entity.c b/drivers/media/usb/uvc/uvc_entity.c index dc56a59ecadc..245445491516 100644 --- a/drivers/media/usb/uvc/uvc_entity.c +++ b/drivers/media/usb/uvc/uvc_entity.c @@ -89,10 +89,10 @@ static int uvc_mc_init_entity(struct uvc_entity *entity) sizeof(entity->subdev.name)); ret = media_entity_init(&entity->subdev.entity, - entity->num_pads, entity->pads, 0); + entity->num_pads, entity->pads); } else if (entity->vdev != NULL) { ret = media_entity_init(&entity->vdev->entity, - entity->num_pads, entity->pads, 0); + entity->num_pads, entity->pads); if (entity->flags & UVC_ENTITY_FLAG_DEFAULT) entity->vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT; } else diff --git a/drivers/media/v4l2-core/tuner-core.c b/drivers/media/v4l2-core/tuner-core.c index 581e21ad6801..100b8f069640 100644 --- a/drivers/media/v4l2-core/tuner-core.c +++ b/drivers/media/v4l2-core/tuner-core.c @@ -699,7 +699,7 @@ register_client: t->sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_TUNER; t->sd.entity.name = t->name; - ret = media_entity_init(&t->sd.entity, 1, &t->pad, 0); + ret = media_entity_init(&t->sd.entity, 1, &t->pad); if (ret < 0) { tuner_err("failed to initialize media entity!\n"); kfree(t); diff --git a/drivers/media/v4l2-core/v4l2-flash-led-class.c b/drivers/media/v4l2-core/v4l2-flash-led-class.c index 5bdfb8d5263a..34c489fed55e 100644 --- a/drivers/media/v4l2-core/v4l2-flash-led-class.c +++ b/drivers/media/v4l2-core/v4l2-flash-led-class.c @@ -651,7 +651,7 @@ struct v4l2_flash *v4l2_flash_init( sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; strlcpy(sd->name, config->dev_name, sizeof(sd->name)); - ret = media_entity_init(&sd->entity, 0, NULL, 0); + ret = media_entity_init(&sd->entity, 0, NULL); if (ret < 0) return ERR_PTR(ret); diff --git a/drivers/staging/media/davinci_vpfe/dm365_ipipe.c b/drivers/staging/media/davinci_vpfe/dm365_ipipe.c index c492914768ea..3badf169c419 100644 --- a/drivers/staging/media/davinci_vpfe/dm365_ipipe.c +++ b/drivers/staging/media/davinci_vpfe/dm365_ipipe.c @@ -1840,7 +1840,7 @@ vpfe_ipipe_init(struct vpfe_ipipe_device *ipipe, struct platform_device *pdev) v4l2_ctrl_handler_setup(&ipipe->ctrls); sd->ctrl_handler = &ipipe->ctrls; - return media_entity_init(me, IPIPE_PADS_NUM, pads, 0); + return media_entity_init(me, IPIPE_PADS_NUM, pads); } /* diff --git a/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c b/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c index 8b230541b1d1..8fb676186898 100644 --- a/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c +++ b/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c @@ -1026,7 +1026,7 @@ int vpfe_ipipeif_init(struct vpfe_ipipeif_device *ipipeif, ipipeif->output = IPIPEIF_OUTPUT_NONE; me->ops = &ipipeif_media_ops; - ret = media_entity_init(me, IPIPEIF_NUM_PADS, pads, 0); + ret = media_entity_init(me, IPIPEIF_NUM_PADS, pads); if (ret) goto fail; diff --git a/drivers/staging/media/davinci_vpfe/dm365_isif.c b/drivers/staging/media/davinci_vpfe/dm365_isif.c index 80907b464412..b1f01adfa7c8 100644 --- a/drivers/staging/media/davinci_vpfe/dm365_isif.c +++ b/drivers/staging/media/davinci_vpfe/dm365_isif.c @@ -2052,7 +2052,7 @@ int vpfe_isif_init(struct vpfe_isif_device *isif, struct platform_device *pdev) isif->input = ISIF_INPUT_NONE; isif->output = ISIF_OUTPUT_NONE; me->ops = &isif_media_ops; - status = media_entity_init(me, ISIF_PADS_NUM, pads, 0); + status = media_entity_init(me, ISIF_PADS_NUM, pads); if (status) goto isif_fail; isif->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; diff --git a/drivers/staging/media/davinci_vpfe/dm365_resizer.c b/drivers/staging/media/davinci_vpfe/dm365_resizer.c index d892fee3f52f..7275cf3d6c20 100644 --- a/drivers/staging/media/davinci_vpfe/dm365_resizer.c +++ b/drivers/staging/media/davinci_vpfe/dm365_resizer.c @@ -1910,7 +1910,7 @@ int vpfe_resizer_init(struct vpfe_resizer_device *vpfe_rsz, vpfe_rsz->crop_resizer.output2 = RESIZER_CROP_OUTPUT_NONE; vpfe_rsz->crop_resizer.rsz_device = vpfe_rsz; me->ops = &resizer_media_ops; - ret = media_entity_init(me, RESIZER_CROP_PADS_NUM, pads, 0); + ret = media_entity_init(me, RESIZER_CROP_PADS_NUM, pads); if (ret) return ret; @@ -1932,7 +1932,7 @@ int vpfe_resizer_init(struct vpfe_resizer_device *vpfe_rsz, vpfe_rsz->resizer_a.output = RESIZER_OUTPUT_NONE; vpfe_rsz->resizer_a.rsz_device = vpfe_rsz; me->ops = &resizer_media_ops; - ret = media_entity_init(me, RESIZER_PADS_NUM, pads, 0); + ret = media_entity_init(me, RESIZER_PADS_NUM, pads); if (ret) return ret; @@ -1954,7 +1954,7 @@ int vpfe_resizer_init(struct vpfe_resizer_device *vpfe_rsz, vpfe_rsz->resizer_b.output = RESIZER_OUTPUT_NONE; vpfe_rsz->resizer_b.rsz_device = vpfe_rsz; me->ops = &resizer_media_ops; - ret = media_entity_init(me, RESIZER_PADS_NUM, pads, 0); + ret = media_entity_init(me, RESIZER_PADS_NUM, pads); if (ret) return ret; diff --git a/drivers/staging/media/davinci_vpfe/vpfe_video.c b/drivers/staging/media/davinci_vpfe/vpfe_video.c index adb2bc8811ab..daae720eb82c 100644 --- a/drivers/staging/media/davinci_vpfe/vpfe_video.c +++ b/drivers/staging/media/davinci_vpfe/vpfe_video.c @@ -1601,7 +1601,7 @@ int vpfe_video_init(struct vpfe_video_device *video, const char *name) spin_lock_init(&video->dma_queue_lock); mutex_init(&video->lock); ret = media_entity_init(&video->video_dev.entity, - 1, &video->pad, 0); + 1, &video->pad); if (ret < 0) return ret; diff --git a/drivers/staging/media/omap4iss/iss_csi2.c b/drivers/staging/media/omap4iss/iss_csi2.c index b941035139ae..86111e39a728 100644 --- a/drivers/staging/media/omap4iss/iss_csi2.c +++ b/drivers/staging/media/omap4iss/iss_csi2.c @@ -1271,7 +1271,7 @@ static int csi2_init_entities(struct iss_csi2_device *csi2, const char *subname) pads[CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; me->ops = &csi2_media_ops; - ret = media_entity_init(me, CSI2_PADS_NUM, pads, 0); + ret = media_entity_init(me, CSI2_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/staging/media/omap4iss/iss_ipipe.c b/drivers/staging/media/omap4iss/iss_ipipe.c index dd0abeffd893..44220765fb3a 100644 --- a/drivers/staging/media/omap4iss/iss_ipipe.c +++ b/drivers/staging/media/omap4iss/iss_ipipe.c @@ -513,7 +513,7 @@ static int ipipe_init_entities(struct iss_ipipe_device *ipipe) pads[IPIPE_PAD_SOURCE_VP].flags = MEDIA_PAD_FL_SOURCE; me->ops = &ipipe_media_ops; - ret = media_entity_init(me, IPIPE_PADS_NUM, pads, 0); + ret = media_entity_init(me, IPIPE_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/staging/media/omap4iss/iss_ipipeif.c b/drivers/staging/media/omap4iss/iss_ipipeif.c index 5f9e449e7007..d031a5f22cdc 100644 --- a/drivers/staging/media/omap4iss/iss_ipipeif.c +++ b/drivers/staging/media/omap4iss/iss_ipipeif.c @@ -743,7 +743,7 @@ static int ipipeif_init_entities(struct iss_ipipeif_device *ipipeif) pads[IPIPEIF_PAD_SOURCE_VP].flags = MEDIA_PAD_FL_SOURCE; me->ops = &ipipeif_media_ops; - ret = media_entity_init(me, IPIPEIF_PADS_NUM, pads, 0); + ret = media_entity_init(me, IPIPEIF_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/staging/media/omap4iss/iss_resizer.c b/drivers/staging/media/omap4iss/iss_resizer.c index 108961e05f53..11031d9de3ab 100644 --- a/drivers/staging/media/omap4iss/iss_resizer.c +++ b/drivers/staging/media/omap4iss/iss_resizer.c @@ -785,7 +785,7 @@ static int resizer_init_entities(struct iss_resizer_device *resizer) pads[RESIZER_PAD_SOURCE_MEM].flags = MEDIA_PAD_FL_SOURCE; me->ops = &resizer_media_ops; - ret = media_entity_init(me, RESIZER_PADS_NUM, pads, 0); + ret = media_entity_init(me, RESIZER_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/staging/media/omap4iss/iss_video.c b/drivers/staging/media/omap4iss/iss_video.c index e9aeca08986f..194c41ef822c 100644 --- a/drivers/staging/media/omap4iss/iss_video.c +++ b/drivers/staging/media/omap4iss/iss_video.c @@ -1102,7 +1102,7 @@ int omap4iss_video_init(struct iss_video *video, const char *name) return -EINVAL; } - ret = media_entity_init(&video->video.entity, 1, &video->pad, 0); + ret = media_entity_init(&video->video.entity, 1, &video->pad); if (ret < 0) return ret; diff --git a/include/media/media-entity.h b/include/media/media-entity.h index 197f93799753..b92366317aee 100644 --- a/include/media/media-entity.h +++ b/include/media/media-entity.h @@ -134,7 +134,7 @@ struct media_entity_graph { }; int media_entity_init(struct media_entity *entity, u16 num_pads, - struct media_pad *pads, u16 extra_links); + struct media_pad *pads); void media_entity_cleanup(struct media_entity *entity); int media_entity_create_link(struct media_entity *source, u16 source_pad, -- cgit v1.2.3 From 8df00a15817e3a252510ac914870214859325189 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Aug 2015 08:14:38 -0300 Subject: [media] media: rename the function that create pad links With the new API, a link can be either between two PADs or between an interface and an entity. So, we need to use a better name for the function that create links between two pads. So, rename the such function to media_create_pad_link(). No functional changes. This patch was created via this shell script: for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f) $(find include/ -name '*.h' -type f) ; do sed s,media_entity_create_link,media_create_pad_link,g <$i >a && mv a $i; done Acked-by: Hans Verkuil Tested-by: Javier Martinez Canillas Signed-off-by: Mauro Carvalho Chehab --- Documentation/media-framework.txt | 2 +- drivers/media/dvb-core/dvbdev.c | 8 ++++---- drivers/media/i2c/s5c73m3/s5c73m3-core.c | 4 ++-- drivers/media/i2c/s5k5baf.c | 2 +- drivers/media/i2c/smiapp/smiapp-core.c | 4 ++-- drivers/media/media-entity.c | 4 ++-- drivers/media/platform/exynos4-is/media-dev.c | 16 ++++++++-------- drivers/media/platform/omap3isp/isp.c | 18 +++++++++--------- drivers/media/platform/omap3isp/ispccdc.c | 2 +- drivers/media/platform/omap3isp/ispccp2.c | 2 +- drivers/media/platform/omap3isp/ispcsi2.c | 2 +- drivers/media/platform/omap3isp/isppreview.c | 4 ++-- drivers/media/platform/omap3isp/ispresizer.c | 4 ++-- drivers/media/platform/s3c-camif/camif-core.c | 4 ++-- drivers/media/platform/vsp1/vsp1_drv.c | 4 ++-- drivers/media/platform/vsp1/vsp1_rpf.c | 2 +- drivers/media/platform/vsp1/vsp1_wpf.c | 2 +- drivers/media/platform/xilinx/xilinx-vipp.c | 4 ++-- drivers/media/usb/au0828/au0828-core.c | 6 +++--- drivers/media/usb/cx231xx/cx231xx-cards.c | 6 +++--- drivers/media/usb/uvc/uvc_entity.c | 2 +- drivers/staging/media/davinci_vpfe/dm365_ipipeif.c | 2 +- drivers/staging/media/davinci_vpfe/dm365_isif.c | 2 +- drivers/staging/media/davinci_vpfe/dm365_resizer.c | 8 ++++---- drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c | 10 +++++----- drivers/staging/media/omap4iss/iss.c | 12 ++++++------ drivers/staging/media/omap4iss/iss_csi2.c | 2 +- drivers/staging/media/omap4iss/iss_ipipeif.c | 2 +- drivers/staging/media/omap4iss/iss_resizer.c | 2 +- include/media/media-entity.h | 2 +- 30 files changed, 72 insertions(+), 72 deletions(-) (limited to 'Documentation') diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt index 6903b2503577..b424de6c3bb3 100644 --- a/Documentation/media-framework.txt +++ b/Documentation/media-framework.txt @@ -199,7 +199,7 @@ pre-allocated and grows dynamically as needed. Drivers create links by calling - media_entity_create_link(struct media_entity *source, u16 source_pad, + media_create_pad_link(struct media_entity *source, u16 source_pad, struct media_entity *sink, u16 sink_pad, u32 flags); diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c index 2fdcbb5f000a..65f59f2124b4 100644 --- a/drivers/media/dvb-core/dvbdev.c +++ b/drivers/media/dvb-core/dvbdev.c @@ -412,16 +412,16 @@ void dvb_create_media_graph(struct dvb_adapter *adap) } if (tuner && fe) - media_entity_create_link(tuner, 0, fe, 0, 0); + media_create_pad_link(tuner, 0, fe, 0, 0); if (fe && demux) - media_entity_create_link(fe, 1, demux, 0, MEDIA_LNK_FL_ENABLED); + media_create_pad_link(fe, 1, demux, 0, MEDIA_LNK_FL_ENABLED); if (demux && dvr) - media_entity_create_link(demux, 1, dvr, 0, MEDIA_LNK_FL_ENABLED); + media_create_pad_link(demux, 1, dvr, 0, MEDIA_LNK_FL_ENABLED); if (demux && ca) - media_entity_create_link(demux, 1, ca, 0, MEDIA_LNK_FL_ENABLED); + media_create_pad_link(demux, 1, ca, 0, MEDIA_LNK_FL_ENABLED); } EXPORT_SYMBOL_GPL(dvb_create_media_graph); #endif diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c index 381f903831f4..45c823b68f48 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c @@ -1482,11 +1482,11 @@ static int s5c73m3_oif_registered(struct v4l2_subdev *sd) return ret; } - ret = media_entity_create_link(&state->sensor_sd.entity, + ret = media_create_pad_link(&state->sensor_sd.entity, S5C73M3_ISP_PAD, &state->oif_sd.entity, OIF_ISP_PAD, MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED); - ret = media_entity_create_link(&state->sensor_sd.entity, + ret = media_create_pad_link(&state->sensor_sd.entity, S5C73M3_JPEG_PAD, &state->oif_sd.entity, OIF_JPEG_PAD, MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED); diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c index 30a9ca62e034..d3bff30bcb6f 100644 --- a/drivers/media/i2c/s5k5baf.c +++ b/drivers/media/i2c/s5k5baf.c @@ -1756,7 +1756,7 @@ static int s5k5baf_registered(struct v4l2_subdev *sd) v4l2_err(sd, "failed to register subdev %s\n", state->cis_sd.name); else - ret = media_entity_create_link(&state->cis_sd.entity, PAD_CIS, + ret = media_create_pad_link(&state->cis_sd.entity, PAD_CIS, &state->sd.entity, PAD_CIS, MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED); diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c index 7ed0538ea8db..cf0cd507c2d0 100644 --- a/drivers/media/i2c/smiapp/smiapp-core.c +++ b/drivers/media/i2c/smiapp/smiapp-core.c @@ -2495,7 +2495,7 @@ static int smiapp_register_subdevs(struct smiapp_sensor *sensor) return rval; } - rval = media_entity_create_link(&this->sd.entity, + rval = media_create_pad_link(&this->sd.entity, this->source_pad, &last->sd.entity, last->sink_pad, @@ -2503,7 +2503,7 @@ static int smiapp_register_subdevs(struct smiapp_sensor *sensor) MEDIA_LNK_FL_IMMUTABLE); if (rval) { dev_err(&client->dev, - "media_entity_create_link failed\n"); + "media_create_pad_link failed\n"); return rval; } diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c index f5b4822a324f..e840da0325b7 100644 --- a/drivers/media/media-entity.c +++ b/drivers/media/media-entity.c @@ -542,7 +542,7 @@ static struct media_link *media_entity_add_link(struct media_entity *entity) } int -media_entity_create_link(struct media_entity *source, u16 source_pad, +media_create_pad_link(struct media_entity *source, u16 source_pad, struct media_entity *sink, u16 sink_pad, u32 flags) { struct media_link *link; @@ -586,7 +586,7 @@ media_entity_create_link(struct media_entity *source, u16 source_pad, return 0; } -EXPORT_SYMBOL_GPL(media_entity_create_link); +EXPORT_SYMBOL_GPL(media_create_pad_link); void __media_entity_remove_links(struct media_entity *entity) { diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c index 9481ce3201a2..4c524a02c59c 100644 --- a/drivers/media/platform/exynos4-is/media-dev.c +++ b/drivers/media/platform/exynos4-is/media-dev.c @@ -729,7 +729,7 @@ static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd, flags = ((1 << i) & link_mask) ? MEDIA_LNK_FL_ENABLED : 0; sink = &fmd->fimc[i]->vid_cap.subdev.entity; - ret = media_entity_create_link(source, pad, sink, + ret = media_create_pad_link(source, pad, sink, FIMC_SD_PAD_SINK_CAM, flags); if (ret) return ret; @@ -749,7 +749,7 @@ static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd, continue; sink = &fmd->fimc_lite[i]->subdev.entity; - ret = media_entity_create_link(source, pad, sink, + ret = media_create_pad_link(source, pad, sink, FLITE_SD_PAD_SINK, 0); if (ret) return ret; @@ -781,13 +781,13 @@ static int __fimc_md_create_flite_source_links(struct fimc_md *fmd) source = &fimc->subdev.entity; sink = &fimc->ve.vdev.entity; /* FIMC-LITE's subdev and video node */ - ret = media_entity_create_link(source, FLITE_SD_PAD_SOURCE_DMA, + ret = media_create_pad_link(source, FLITE_SD_PAD_SOURCE_DMA, sink, 0, 0); if (ret) break; /* Link from FIMC-LITE to IS-ISP subdev */ sink = &fmd->fimc_is->isp.subdev.entity; - ret = media_entity_create_link(source, FLITE_SD_PAD_SOURCE_ISP, + ret = media_create_pad_link(source, FLITE_SD_PAD_SOURCE_ISP, sink, 0, 0); if (ret) break; @@ -811,7 +811,7 @@ static int __fimc_md_create_fimc_is_links(struct fimc_md *fmd) /* Link from FIMC-IS-ISP subdev to FIMC */ sink = &fmd->fimc[i]->vid_cap.subdev.entity; - ret = media_entity_create_link(source, FIMC_ISP_SD_PAD_SRC_FIFO, + ret = media_create_pad_link(source, FIMC_ISP_SD_PAD_SRC_FIFO, sink, FIMC_SD_PAD_SINK_FIFO, 0); if (ret) return ret; @@ -824,7 +824,7 @@ static int __fimc_md_create_fimc_is_links(struct fimc_md *fmd) if (sink->num_pads == 0) return 0; - return media_entity_create_link(source, FIMC_ISP_SD_PAD_SRC_DMA, + return media_create_pad_link(source, FIMC_ISP_SD_PAD_SRC_DMA, sink, 0, 0); } @@ -873,7 +873,7 @@ static int fimc_md_create_links(struct fimc_md *fmd) return -EINVAL; pad = sensor->entity.num_pads - 1; - ret = media_entity_create_link(&sensor->entity, pad, + ret = media_create_pad_link(&sensor->entity, pad, &csis->entity, CSIS_PAD_SINK, MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED); @@ -927,7 +927,7 @@ static int fimc_md_create_links(struct fimc_md *fmd) source = &fmd->fimc[i]->vid_cap.subdev.entity; sink = &fmd->fimc[i]->vid_cap.ve.vdev.entity; - ret = media_entity_create_link(source, FIMC_SD_PAD_SOURCE, + ret = media_create_pad_link(source, FIMC_SD_PAD_SOURCE, sink, 0, flags); if (ret) break; diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index e08183f9d0f7..6351f35b0a65 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -1865,7 +1865,7 @@ static int isp_link_entity( return -EINVAL; } - return media_entity_create_link(entity, i, input, pad, flags); + return media_create_pad_link(entity, i, input, pad, flags); } static int isp_register_entities(struct isp_device *isp) @@ -2004,51 +2004,51 @@ static int isp_initialize_modules(struct isp_device *isp) } /* Connect the submodules. */ - ret = media_entity_create_link( + ret = media_create_pad_link( &isp->isp_csi2a.subdev.entity, CSI2_PAD_SOURCE, &isp->isp_ccdc.subdev.entity, CCDC_PAD_SINK, 0); if (ret < 0) goto error_link; - ret = media_entity_create_link( + ret = media_create_pad_link( &isp->isp_ccp2.subdev.entity, CCP2_PAD_SOURCE, &isp->isp_ccdc.subdev.entity, CCDC_PAD_SINK, 0); if (ret < 0) goto error_link; - ret = media_entity_create_link( + ret = media_create_pad_link( &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, &isp->isp_prev.subdev.entity, PREV_PAD_SINK, 0); if (ret < 0) goto error_link; - ret = media_entity_create_link( + ret = media_create_pad_link( &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_OF, &isp->isp_res.subdev.entity, RESZ_PAD_SINK, 0); if (ret < 0) goto error_link; - ret = media_entity_create_link( + ret = media_create_pad_link( &isp->isp_prev.subdev.entity, PREV_PAD_SOURCE, &isp->isp_res.subdev.entity, RESZ_PAD_SINK, 0); if (ret < 0) goto error_link; - ret = media_entity_create_link( + ret = media_create_pad_link( &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, &isp->isp_aewb.subdev.entity, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); if (ret < 0) goto error_link; - ret = media_entity_create_link( + ret = media_create_pad_link( &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, &isp->isp_af.subdev.entity, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); if (ret < 0) goto error_link; - ret = media_entity_create_link( + ret = media_create_pad_link( &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, &isp->isp_hist.subdev.entity, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c index d96e3be5e252..27555e4f4aa8 100644 --- a/drivers/media/platform/omap3isp/ispccdc.c +++ b/drivers/media/platform/omap3isp/ispccdc.c @@ -2667,7 +2667,7 @@ static int ccdc_init_entities(struct isp_ccdc_device *ccdc) goto error_video; /* Connect the CCDC subdev to the video node. */ - ret = media_entity_create_link(&ccdc->subdev.entity, CCDC_PAD_SOURCE_OF, + ret = media_create_pad_link(&ccdc->subdev.entity, CCDC_PAD_SOURCE_OF, &ccdc->video_out.video.entity, 0, 0); if (ret < 0) goto error_link; diff --git a/drivers/media/platform/omap3isp/ispccp2.c b/drivers/media/platform/omap3isp/ispccp2.c index e1b5f5bea541..b215eb5049d6 100644 --- a/drivers/media/platform/omap3isp/ispccp2.c +++ b/drivers/media/platform/omap3isp/ispccp2.c @@ -1100,7 +1100,7 @@ static int ccp2_init_entities(struct isp_ccp2_device *ccp2) goto error_video; /* Connect the video node to the ccp2 subdev. */ - ret = media_entity_create_link(&ccp2->video_in.video.entity, 0, + ret = media_create_pad_link(&ccp2->video_in.video.entity, 0, &ccp2->subdev.entity, CCP2_PAD_SINK, 0); if (ret < 0) goto error_link; diff --git a/drivers/media/platform/omap3isp/ispcsi2.c b/drivers/media/platform/omap3isp/ispcsi2.c index 6fff92f0813a..fcefc1e74881 100644 --- a/drivers/media/platform/omap3isp/ispcsi2.c +++ b/drivers/media/platform/omap3isp/ispcsi2.c @@ -1265,7 +1265,7 @@ static int csi2_init_entities(struct isp_csi2_device *csi2) goto error_video; /* Connect the CSI2 subdev to the video node. */ - ret = media_entity_create_link(&csi2->subdev.entity, CSI2_PAD_SOURCE, + ret = media_create_pad_link(&csi2->subdev.entity, CSI2_PAD_SOURCE, &csi2->video_out.video.entity, 0, 0); if (ret < 0) goto error_link; diff --git a/drivers/media/platform/omap3isp/isppreview.c b/drivers/media/platform/omap3isp/isppreview.c index b440c6342ca4..ad38d20c7770 100644 --- a/drivers/media/platform/omap3isp/isppreview.c +++ b/drivers/media/platform/omap3isp/isppreview.c @@ -2312,12 +2312,12 @@ static int preview_init_entities(struct isp_prev_device *prev) goto error_video_out; /* Connect the video nodes to the previewer subdev. */ - ret = media_entity_create_link(&prev->video_in.video.entity, 0, + ret = media_create_pad_link(&prev->video_in.video.entity, 0, &prev->subdev.entity, PREV_PAD_SINK, 0); if (ret < 0) goto error_link; - ret = media_entity_create_link(&prev->subdev.entity, PREV_PAD_SOURCE, + ret = media_create_pad_link(&prev->subdev.entity, PREV_PAD_SOURCE, &prev->video_out.video.entity, 0, 0); if (ret < 0) goto error_link; diff --git a/drivers/media/platform/omap3isp/ispresizer.c b/drivers/media/platform/omap3isp/ispresizer.c index 3deb1ec4a973..b48ad4d4b834 100644 --- a/drivers/media/platform/omap3isp/ispresizer.c +++ b/drivers/media/platform/omap3isp/ispresizer.c @@ -1756,12 +1756,12 @@ static int resizer_init_entities(struct isp_res_device *res) res->video_out.video.entity.flags |= MEDIA_ENT_FL_DEFAULT; /* Connect the video nodes to the resizer subdev. */ - ret = media_entity_create_link(&res->video_in.video.entity, 0, + ret = media_create_pad_link(&res->video_in.video.entity, 0, &res->subdev.entity, RESZ_PAD_SINK, 0); if (ret < 0) goto error_link; - ret = media_entity_create_link(&res->subdev.entity, RESZ_PAD_SOURCE, + ret = media_create_pad_link(&res->subdev.entity, RESZ_PAD_SOURCE, &res->video_out.video.entity, 0, 0); if (ret < 0) goto error_link; diff --git a/drivers/media/platform/s3c-camif/camif-core.c b/drivers/media/platform/s3c-camif/camif-core.c index 1ba9bb08f5da..8649d4c0e90d 100644 --- a/drivers/media/platform/s3c-camif/camif-core.c +++ b/drivers/media/platform/s3c-camif/camif-core.c @@ -263,7 +263,7 @@ static int camif_create_media_links(struct camif_dev *camif) { int i, ret; - ret = media_entity_create_link(&camif->sensor.sd->entity, 0, + ret = media_create_pad_link(&camif->sensor.sd->entity, 0, &camif->subdev.entity, CAMIF_SD_PAD_SINK, MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED); @@ -271,7 +271,7 @@ static int camif_create_media_links(struct camif_dev *camif) return ret; for (i = 1; i < CAMIF_SD_PADS_NUM && !ret; i++) { - ret = media_entity_create_link(&camif->subdev.entity, i, + ret = media_create_pad_link(&camif->subdev.entity, i, &camif->vp[i - 1].vdev.entity, 0, MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED); diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c index 4e61886384e3..9cd94a76a9ed 100644 --- a/drivers/media/platform/vsp1/vsp1_drv.c +++ b/drivers/media/platform/vsp1/vsp1_drv.c @@ -101,7 +101,7 @@ static int vsp1_create_links(struct vsp1_device *vsp1, struct vsp1_entity *sink) if (!(entity->pads[pad].flags & MEDIA_PAD_FL_SINK)) continue; - ret = media_entity_create_link(&source->subdev.entity, + ret = media_create_pad_link(&source->subdev.entity, source->source_pad, entity, pad, flags); if (ret < 0) @@ -262,7 +262,7 @@ static int vsp1_create_entities(struct vsp1_device *vsp1) } if (vsp1->pdata.features & VSP1_HAS_LIF) { - ret = media_entity_create_link( + ret = media_create_pad_link( &vsp1->wpf[0]->entity.subdev.entity, RWPF_PAD_SOURCE, &vsp1->lif->entity.subdev.entity, LIF_PAD_SINK, 0); if (ret < 0) diff --git a/drivers/media/platform/vsp1/vsp1_rpf.c b/drivers/media/platform/vsp1/vsp1_rpf.c index cd5248a9a271..1bd51d22ff04 100644 --- a/drivers/media/platform/vsp1/vsp1_rpf.c +++ b/drivers/media/platform/vsp1/vsp1_rpf.c @@ -278,7 +278,7 @@ struct vsp1_rwpf *vsp1_rpf_create(struct vsp1_device *vsp1, unsigned int index) rpf->entity.video = video; /* Connect the video device to the RPF. */ - ret = media_entity_create_link(&rpf->video.video.entity, 0, + ret = media_create_pad_link(&rpf->video.video.entity, 0, &rpf->entity.subdev.entity, RWPF_PAD_SINK, MEDIA_LNK_FL_ENABLED | diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c b/drivers/media/platform/vsp1/vsp1_wpf.c index 95b62f4f77e7..ca19c534dac6 100644 --- a/drivers/media/platform/vsp1/vsp1_wpf.c +++ b/drivers/media/platform/vsp1/vsp1_wpf.c @@ -284,7 +284,7 @@ struct vsp1_rwpf *vsp1_wpf_create(struct vsp1_device *vsp1, unsigned int index) if (!(vsp1->pdata.features & VSP1_HAS_LIF) || index != 0) flags |= MEDIA_LNK_FL_IMMUTABLE; - ret = media_entity_create_link(&wpf->entity.subdev.entity, + ret = media_create_pad_link(&wpf->entity.subdev.entity, RWPF_PAD_SOURCE, &wpf->video.video.entity, 0, flags); if (ret < 0) diff --git a/drivers/media/platform/xilinx/xilinx-vipp.c b/drivers/media/platform/xilinx/xilinx-vipp.c index b9bf24fefa5a..2352f7e5a6a3 100644 --- a/drivers/media/platform/xilinx/xilinx-vipp.c +++ b/drivers/media/platform/xilinx/xilinx-vipp.c @@ -156,7 +156,7 @@ static int xvip_graph_build_one(struct xvip_composite_device *xdev, local->name, local_pad->index, remote->name, remote_pad->index); - ret = media_entity_create_link(local, local_pad->index, + ret = media_create_pad_link(local, local_pad->index, remote, remote_pad->index, link_flags); if (ret < 0) { @@ -270,7 +270,7 @@ static int xvip_graph_build_dma(struct xvip_composite_device *xdev) source->name, source_pad->index, sink->name, sink_pad->index); - ret = media_entity_create_link(source, source_pad->index, + ret = media_create_pad_link(source, source_pad->index, sink, sink_pad->index, link_flags); if (ret < 0) { diff --git a/drivers/media/usb/au0828/au0828-core.c b/drivers/media/usb/au0828/au0828-core.c index 0378a2c99ebb..a55eb524ea21 100644 --- a/drivers/media/usb/au0828/au0828-core.c +++ b/drivers/media/usb/au0828/au0828-core.c @@ -260,13 +260,13 @@ static void au0828_create_media_graph(struct au0828_dev *dev) return; if (tuner) - media_entity_create_link(tuner, 0, decoder, 0, + media_create_pad_link(tuner, 0, decoder, 0, MEDIA_LNK_FL_ENABLED); if (dev->vdev.entity.links) - media_entity_create_link(decoder, 1, &dev->vdev.entity, 0, + media_create_pad_link(decoder, 1, &dev->vdev.entity, 0, MEDIA_LNK_FL_ENABLED); if (dev->vbi_dev.entity.links) - media_entity_create_link(decoder, 2, &dev->vbi_dev.entity, 0, + media_create_pad_link(decoder, 2, &dev->vbi_dev.entity, 0, MEDIA_LNK_FL_ENABLED); #endif } diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index 89dc695c696e..695f0c092c79 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -1264,11 +1264,11 @@ static void cx231xx_create_media_graph(struct cx231xx *dev) return; if (tuner) - media_entity_create_link(tuner, 0, decoder, 0, + media_create_pad_link(tuner, 0, decoder, 0, MEDIA_LNK_FL_ENABLED); - media_entity_create_link(decoder, 1, &dev->vdev.entity, 0, + media_create_pad_link(decoder, 1, &dev->vdev.entity, 0, MEDIA_LNK_FL_ENABLED); - media_entity_create_link(decoder, 2, &dev->vbi_dev.entity, 0, + media_create_pad_link(decoder, 2, &dev->vbi_dev.entity, 0, MEDIA_LNK_FL_ENABLED); #endif } diff --git a/drivers/media/usb/uvc/uvc_entity.c b/drivers/media/usb/uvc/uvc_entity.c index 245445491516..429e428ccd93 100644 --- a/drivers/media/usb/uvc/uvc_entity.c +++ b/drivers/media/usb/uvc/uvc_entity.c @@ -56,7 +56,7 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain, continue; remote_pad = remote->num_pads - 1; - ret = media_entity_create_link(source, remote_pad, + ret = media_create_pad_link(source, remote_pad, sink, i, flags); if (ret < 0) return ret; diff --git a/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c b/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c index 8fb676186898..d96bdaaae50e 100644 --- a/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c +++ b/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c @@ -971,7 +971,7 @@ vpfe_ipipeif_register_entities(struct vpfe_ipipeif_device *ipipeif, ipipeif->video_in.vpfe_dev = vpfe_dev; flags = 0; - ret = media_entity_create_link(&ipipeif->video_in.video_dev.entity, 0, + ret = media_create_pad_link(&ipipeif->video_in.video_dev.entity, 0, &ipipeif->subdev.entity, 0, flags); if (ret < 0) goto fail; diff --git a/drivers/staging/media/davinci_vpfe/dm365_isif.c b/drivers/staging/media/davinci_vpfe/dm365_isif.c index b1f01adfa7c8..df77288b0ec0 100644 --- a/drivers/staging/media/davinci_vpfe/dm365_isif.c +++ b/drivers/staging/media/davinci_vpfe/dm365_isif.c @@ -1817,7 +1817,7 @@ int vpfe_isif_register_entities(struct vpfe_isif_device *isif, isif->video_out.vpfe_dev = vpfe_dev; flags = 0; /* connect isif to video node */ - ret = media_entity_create_link(&isif->subdev.entity, 1, + ret = media_create_pad_link(&isif->subdev.entity, 1, &isif->video_out.video_dev.entity, 0, flags); if (ret < 0) diff --git a/drivers/staging/media/davinci_vpfe/dm365_resizer.c b/drivers/staging/media/davinci_vpfe/dm365_resizer.c index 7275cf3d6c20..50c8725c5aa6 100644 --- a/drivers/staging/media/davinci_vpfe/dm365_resizer.c +++ b/drivers/staging/media/davinci_vpfe/dm365_resizer.c @@ -1826,27 +1826,27 @@ int vpfe_resizer_register_entities(struct vpfe_resizer_device *resizer, resizer->resizer_b.video_out.vpfe_dev = vpfe_dev; /* create link between Resizer Crop----> Resizer A*/ - ret = media_entity_create_link(&resizer->crop_resizer.subdev.entity, 1, + ret = media_create_pad_link(&resizer->crop_resizer.subdev.entity, 1, &resizer->resizer_a.subdev.entity, 0, flags); if (ret < 0) goto out_create_link; /* create link between Resizer Crop----> Resizer B*/ - ret = media_entity_create_link(&resizer->crop_resizer.subdev.entity, 2, + ret = media_create_pad_link(&resizer->crop_resizer.subdev.entity, 2, &resizer->resizer_b.subdev.entity, 0, flags); if (ret < 0) goto out_create_link; /* create link between Resizer A ----> video out */ - ret = media_entity_create_link(&resizer->resizer_a.subdev.entity, 1, + ret = media_create_pad_link(&resizer->resizer_a.subdev.entity, 1, &resizer->resizer_a.video_out.video_dev.entity, 0, flags); if (ret < 0) goto out_create_link; /* create link between Resizer B ----> video out */ - ret = media_entity_create_link(&resizer->resizer_b.subdev.entity, 1, + ret = media_create_pad_link(&resizer->resizer_b.subdev.entity, 1, &resizer->resizer_b.video_out.video_dev.entity, 0, flags); if (ret < 0) goto out_create_link; diff --git a/drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c b/drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c index 69b678ca40c0..ec46f366dd17 100644 --- a/drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c +++ b/drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c @@ -445,32 +445,32 @@ static int vpfe_register_entities(struct vpfe_device *vpfe_dev) /* if entity has no pads (ex: amplifier), cant establish link */ if (vpfe_dev->sd[i]->entity.num_pads) { - ret = media_entity_create_link(&vpfe_dev->sd[i]->entity, + ret = media_create_pad_link(&vpfe_dev->sd[i]->entity, 0, &vpfe_dev->vpfe_isif.subdev.entity, 0, flags); if (ret < 0) goto out_resizer_register; } - ret = media_entity_create_link(&vpfe_dev->vpfe_isif.subdev.entity, 1, + ret = media_create_pad_link(&vpfe_dev->vpfe_isif.subdev.entity, 1, &vpfe_dev->vpfe_ipipeif.subdev.entity, 0, flags); if (ret < 0) goto out_resizer_register; - ret = media_entity_create_link(&vpfe_dev->vpfe_ipipeif.subdev.entity, 1, + ret = media_create_pad_link(&vpfe_dev->vpfe_ipipeif.subdev.entity, 1, &vpfe_dev->vpfe_ipipe.subdev.entity, 0, flags); if (ret < 0) goto out_resizer_register; - ret = media_entity_create_link(&vpfe_dev->vpfe_ipipe.subdev.entity, + ret = media_create_pad_link(&vpfe_dev->vpfe_ipipe.subdev.entity, 1, &vpfe_dev->vpfe_resizer.crop_resizer.subdev.entity, 0, flags); if (ret < 0) goto out_resizer_register; - ret = media_entity_create_link(&vpfe_dev->vpfe_ipipeif.subdev.entity, 1, + ret = media_create_pad_link(&vpfe_dev->vpfe_ipipeif.subdev.entity, 1, &vpfe_dev->vpfe_resizer.crop_resizer.subdev.entity, 0, flags); if (ret < 0) diff --git a/drivers/staging/media/omap4iss/iss.c b/drivers/staging/media/omap4iss/iss.c index 5fc3675b190f..60e67fadcac1 100644 --- a/drivers/staging/media/omap4iss/iss.c +++ b/drivers/staging/media/omap4iss/iss.c @@ -1259,7 +1259,7 @@ static int iss_register_entities(struct iss_device *iss) goto done; } - ret = media_entity_create_link(&sensor->entity, 0, input, pad, + ret = media_create_pad_link(&sensor->entity, 0, input, pad, flags); if (ret < 0) goto done; @@ -1317,31 +1317,31 @@ static int iss_initialize_modules(struct iss_device *iss) } /* Connect the submodules. */ - ret = media_entity_create_link( + ret = media_create_pad_link( &iss->csi2a.subdev.entity, CSI2_PAD_SOURCE, &iss->ipipeif.subdev.entity, IPIPEIF_PAD_SINK, 0); if (ret < 0) goto error_link; - ret = media_entity_create_link( + ret = media_create_pad_link( &iss->csi2b.subdev.entity, CSI2_PAD_SOURCE, &iss->ipipeif.subdev.entity, IPIPEIF_PAD_SINK, 0); if (ret < 0) goto error_link; - ret = media_entity_create_link( + ret = media_create_pad_link( &iss->ipipeif.subdev.entity, IPIPEIF_PAD_SOURCE_VP, &iss->resizer.subdev.entity, RESIZER_PAD_SINK, 0); if (ret < 0) goto error_link; - ret = media_entity_create_link( + ret = media_create_pad_link( &iss->ipipeif.subdev.entity, IPIPEIF_PAD_SOURCE_VP, &iss->ipipe.subdev.entity, IPIPE_PAD_SINK, 0); if (ret < 0) goto error_link; - ret = media_entity_create_link( + ret = media_create_pad_link( &iss->ipipe.subdev.entity, IPIPE_PAD_SOURCE_VP, &iss->resizer.subdev.entity, RESIZER_PAD_SINK, 0); if (ret < 0) diff --git a/drivers/staging/media/omap4iss/iss_csi2.c b/drivers/staging/media/omap4iss/iss_csi2.c index 86111e39a728..c6eb5a7a593f 100644 --- a/drivers/staging/media/omap4iss/iss_csi2.c +++ b/drivers/staging/media/omap4iss/iss_csi2.c @@ -1291,7 +1291,7 @@ static int csi2_init_entities(struct iss_csi2_device *csi2, const char *subname) goto error_video; /* Connect the CSI2 subdev to the video node. */ - ret = media_entity_create_link(&csi2->subdev.entity, CSI2_PAD_SOURCE, + ret = media_create_pad_link(&csi2->subdev.entity, CSI2_PAD_SOURCE, &csi2->video_out.video.entity, 0, 0); if (ret < 0) goto error_link; diff --git a/drivers/staging/media/omap4iss/iss_ipipeif.c b/drivers/staging/media/omap4iss/iss_ipipeif.c index d031a5f22cdc..b0c5f2431b62 100644 --- a/drivers/staging/media/omap4iss/iss_ipipeif.c +++ b/drivers/staging/media/omap4iss/iss_ipipeif.c @@ -762,7 +762,7 @@ static int ipipeif_init_entities(struct iss_ipipeif_device *ipipeif) return ret; /* Connect the IPIPEIF subdev to the video node. */ - ret = media_entity_create_link(&ipipeif->subdev.entity, + ret = media_create_pad_link(&ipipeif->subdev.entity, IPIPEIF_PAD_SOURCE_ISIF_SF, &ipipeif->video_out.video.entity, 0, 0); if (ret < 0) diff --git a/drivers/staging/media/omap4iss/iss_resizer.c b/drivers/staging/media/omap4iss/iss_resizer.c index 11031d9de3ab..a2cb57cb460d 100644 --- a/drivers/staging/media/omap4iss/iss_resizer.c +++ b/drivers/staging/media/omap4iss/iss_resizer.c @@ -804,7 +804,7 @@ static int resizer_init_entities(struct iss_resizer_device *resizer) return ret; /* Connect the RESIZER subdev to the video node. */ - ret = media_entity_create_link(&resizer->subdev.entity, + ret = media_create_pad_link(&resizer->subdev.entity, RESIZER_PAD_SOURCE_MEM, &resizer->video_out.video.entity, 0, 0); if (ret < 0) diff --git a/include/media/media-entity.h b/include/media/media-entity.h index 96a5d3e6f6f4..ad9e16e5e44d 100644 --- a/include/media/media-entity.h +++ b/include/media/media-entity.h @@ -215,7 +215,7 @@ int media_entity_init(struct media_entity *entity, u16 num_pads, struct media_pad *pads); void media_entity_cleanup(struct media_entity *entity); -int media_entity_create_link(struct media_entity *source, u16 source_pad, +int media_create_pad_link(struct media_entity *source, u16 source_pad, struct media_entity *sink, u16 sink_pad, u32 flags); void __media_entity_remove_links(struct media_entity *entity); void media_entity_remove_links(struct media_entity *entity); -- cgit v1.2.3 From cf49066152c5b46c0b90f44593beda27997ca58b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 21 Aug 2015 11:50:17 -0300 Subject: [media] replace all occurrences of MEDIA_ENT_T_DEVNODE_V4L Now that interfaces and entities are distinct, it makes no sense of keeping something named as MEDIA_ENT_T_DEVNODE. This change was done with this script: for i in $(git grep -l MEDIA_ENT_T|grep -v uapi/linux/media.h); do sed s,MEDIA_ENT_T_DEVNODE_V4L,MEDIA_ENT_T_V4L2_VIDEO, <$i >a && mv a $i; done Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml | 2 +- drivers/media/platform/xilinx/xilinx-dma.c | 2 +- drivers/media/v4l2-core/v4l2-dev.c | 2 +- drivers/media/v4l2-core/v4l2-subdev.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml index 5872f8bbf774..910243d4edb8 100644 --- a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml +++ b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml @@ -183,7 +183,7 @@ Unknown device node - MEDIA_ENT_T_DEVNODE_V4L + MEDIA_ENT_T_V4L2_VIDEO V4L video, radio or vbi device node diff --git a/drivers/media/platform/xilinx/xilinx-dma.c b/drivers/media/platform/xilinx/xilinx-dma.c index 4b84a0e54a0c..9c8b27254253 100644 --- a/drivers/media/platform/xilinx/xilinx-dma.c +++ b/drivers/media/platform/xilinx/xilinx-dma.c @@ -193,7 +193,7 @@ static int xvip_pipeline_validate(struct xvip_pipeline *pipe, while ((entity = media_entity_graph_walk_next(&graph))) { struct xvip_dma *dma; - if (entity->type != MEDIA_ENT_T_DEVNODE_V4L) + if (entity->type != MEDIA_ENT_T_V4L2_VIDEO) continue; dma = to_xvip_dma(media_entity_to_video_device(entity)); diff --git a/drivers/media/v4l2-core/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c index 6b1eaeddbdb3..2297571a0568 100644 --- a/drivers/media/v4l2-core/v4l2-dev.c +++ b/drivers/media/v4l2-core/v4l2-dev.c @@ -922,7 +922,7 @@ int __video_register_device(struct video_device *vdev, int type, int nr, /* Part 5: Register the entity. */ if (vdev->v4l2_dev->mdev && vdev->vfl_type != VFL_TYPE_SUBDEV) { - vdev->entity.type = MEDIA_ENT_T_DEVNODE_V4L; + vdev->entity.type = MEDIA_ENT_T_V4L2_VIDEO; vdev->entity.name = vdev->name; vdev->entity.info.dev.major = VIDEO_MAJOR; vdev->entity.info.dev.minor = vdev->minor; diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c index 83615b8fb46a..e6e1115d8215 100644 --- a/drivers/media/v4l2-core/v4l2-subdev.c +++ b/drivers/media/v4l2-core/v4l2-subdev.c @@ -535,7 +535,7 @@ v4l2_subdev_link_validate_get_format(struct media_pad *pad, return v4l2_subdev_call(sd, pad, get_fmt, NULL, fmt); } - WARN(pad->entity->type != MEDIA_ENT_T_DEVNODE_V4L, + WARN(pad->entity->type != MEDIA_ENT_T_V4L2_VIDEO, "Driver bug! Wrong media entity type 0x%08x, entity %s\n", pad->entity->type, pad->entity->name); -- cgit v1.2.3 From fef486a07d69cbcae81bf65a6817ff7383104a24 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 21 Aug 2015 11:54:40 -0300 Subject: [media] replace all occurrences of MEDIA_ENT_T_DEVNODE_DVB Now that interfaces and entities are distinct, it makes no sense of keeping something named as MEDIA_ENT_T_DEVNODE_DVB_foo. Made via this script: for i in $(git grep -l MEDIA_ENT_T|grep -v uapi/linux/media.h); do sed s,MEDIA_ENT_T_DEVNODE_DVB_,MEDIA_ENT_T_DVB_, <$i >a && mv a $i; done for i in $(git grep -l MEDIA_ENT_T|grep -v uapi/linux/media.h); do sed s,MEDIA_ENT_T_DVB_DVR,MEDIA_ENT_T_DVB_TSOUT, <$i >a && mv a $i; done for i in $(git grep -l MEDIA_ENT_T|grep -v uapi/linux/media.h); do sed s,MEDIA_ENT_T_DVB_FE,MEDIA_ENT_T_DVB_DEMOD, <$i >a && mv a $i; done for i in $(git grep -l MEDIA_ENT_T|grep -v uapi/linux/media.h); do sed s,MEDIA_ENT_T_DVB_NET,MEDIA_ENT_T_DVB_DEMOD_NET_DECAP, <$i >a && mv a $i; done Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml index 910243d4edb8..32a783635649 100644 --- a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml +++ b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml @@ -195,23 +195,23 @@ ALSA card - MEDIA_ENT_T_DEVNODE_DVB_FE + MEDIA_ENT_T_DVB_DEMOD DVB frontend devnode - MEDIA_ENT_T_DEVNODE_DVB_DEMUX + MEDIA_ENT_T_DVB_DEMUX DVB demux devnode - MEDIA_ENT_T_DEVNODE_DVB_DVR + MEDIA_ENT_T_DVB_TSOUT DVB DVR devnode - MEDIA_ENT_T_DEVNODE_DVB_CA + MEDIA_ENT_T_DVB_CA DVB CAM devnode - MEDIA_ENT_T_DEVNODE_DVB_NET + MEDIA_ENT_T_DVB_DEMOD_NET_DECAP DVB network devnode -- cgit v1.2.3 From 4ae1723af80ce5a23fa5bc6db1534265af0d6107 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 7 May 2015 22:12:40 -0300 Subject: [media] DocBook: update descriptions for the media controller entities Cleanup the media controller entities description: - remove MEDIA_ENT_T_DEVNODE and MEDIA_ENT_T_V4L2_SUBDEV entity types, as they don't mean anything; - add MEDIA_ENT_T_UNKNOWN with a proper description; - remove ALSA and FB entity types. Those should not be used, as the types are deprecated. We'll soon be adidng ALSA, but with a different entity namespace; - improve the description of some entities. Signed-off-by: Mauro Carvalho Chehab --- .../DocBook/media/v4l/media-ioc-enum-entities.xml | 47 ++++++++++------------ 1 file changed, 22 insertions(+), 25 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml index 32a783635649..13d0b5891fb7 100644 --- a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml +++ b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml @@ -179,70 +179,67 @@ - MEDIA_ENT_T_DEVNODE - Unknown device node + MEDIA_ENT_T_UNKNOWN and MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN + Unknown entity. That generally indicates that + a driver didn't initialize properly the entity, with is a Kernel bug MEDIA_ENT_T_V4L2_VIDEO - V4L video, radio or vbi device node + V4L video streaming input or output entity - MEDIA_ENT_T_DEVNODE_FB - Frame buffer device node + MEDIA_ENT_T_V4L2_VBI + V4L VBI streaming input or output entity - MEDIA_ENT_T_DEVNODE_ALSA - ALSA card + MEDIA_ENT_T_V4L2_SWRADIO + V4L Software Digital Radio (SDR) streaming input or output entity MEDIA_ENT_T_DVB_DEMOD - DVB frontend devnode + DVB demodulator entity MEDIA_ENT_T_DVB_DEMUX - DVB demux devnode + DVB demux entity. Can be implemented in hardware or in Kernelspace MEDIA_ENT_T_DVB_TSOUT - DVB DVR devnode + DVB Transport Stream output entity MEDIA_ENT_T_DVB_CA - DVB CAM devnode + DVB Conditional Access module (CAM) entity MEDIA_ENT_T_DVB_DEMOD_NET_DECAP - DVB network devnode - - - MEDIA_ENT_T_V4L2_SUBDEV - Unknown V4L sub-device + DVB network ULE/MLE de-encapsulation entity. Can be implemented in hardware or in Kernelspace MEDIA_ENT_T_V4L2_SUBDEV_SENSOR - Video sensor + Camera image sensor entity MEDIA_ENT_T_V4L2_SUBDEV_FLASH - Flash controller + Flash controller entity MEDIA_ENT_T_V4L2_SUBDEV_LENS - Lens controller + Lens controller entity MEDIA_ENT_T_V4L2_SUBDEV_DECODER - Video decoder, the basic function of the video decoder is to - accept analogue video from a wide variety of sources such as + Analog video decoder, the basic function of the video decoder + is to accept analogue video from a wide variety of sources such as broadcast, DVD players, cameras and video cassette recorders, in - either NTSC, PAL or HD format and still occasionally SECAM, separate - it into its component parts, luminance and chrominance, and output - it in some digital video standard, with appropriate embedded timing + either NTSC, PAL, SECAM or HD format, separating the stream + into its component parts, luminance and chrominance, and output + it in some digital video standard, with appropriate timing signals. MEDIA_ENT_T_V4L2_SUBDEV_TUNER - TV and/or radio tuner + Digital TV, analog TV, radio and/or software radio tuner -- cgit v1.2.3 From 0e576b76f5470a2f8b2287958a2b9a3dd0f56f10 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 6 Sep 2015 09:33:39 -0300 Subject: [media] media-entity.h: rename entity.type to entity.function Entities should have one or more functions. Calling it as a type proofed to not be correct, as an entity could eventually have more than one type. So, rename the field as function. Please notice that this patch doesn't extend support for multiple function entities. Such change will happen when we have real case drivers using it. No functional changes. Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/v4l2-framework.txt | 4 ++-- drivers/media/dvb-core/dvbdev.c | 14 +++++++------- drivers/media/dvb-frontends/au8522_decoder.c | 2 +- drivers/media/i2c/adp1653.c | 2 +- drivers/media/i2c/as3645a.c | 2 +- drivers/media/i2c/cx25840/cx25840-core.c | 2 +- drivers/media/i2c/lm3560.c | 2 +- drivers/media/i2c/lm3646.c | 2 +- drivers/media/i2c/m5mols/m5mols_core.c | 2 +- drivers/media/i2c/noon010pc30.c | 2 +- drivers/media/i2c/ov2659.c | 2 +- drivers/media/i2c/ov9650.c | 2 +- drivers/media/i2c/s5c73m3/s5c73m3-core.c | 4 ++-- drivers/media/i2c/s5k4ecgx.c | 2 +- drivers/media/i2c/s5k5baf.c | 6 +++--- drivers/media/i2c/s5k6aa.c | 2 +- drivers/media/i2c/smiapp/smiapp-core.c | 2 +- drivers/media/media-device.c | 6 +++--- drivers/media/platform/xilinx/xilinx-dma.c | 2 +- drivers/media/usb/au0828/au0828-core.c | 2 +- drivers/media/usb/au0828/au0828-video.c | 8 ++++---- drivers/media/usb/cx231xx/cx231xx-cards.c | 2 +- drivers/media/usb/cx231xx/cx231xx-video.c | 2 +- drivers/media/v4l2-core/tuner-core.c | 2 +- drivers/media/v4l2-core/v4l2-dev.c | 14 +++++++------- drivers/media/v4l2-core/v4l2-flash-led-class.c | 2 +- drivers/media/v4l2-core/v4l2-subdev.c | 6 +++--- include/media/media-entity.h | 9 +++++---- 28 files changed, 55 insertions(+), 54 deletions(-) (limited to 'Documentation') diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 109cc3792534..2e0fc28fa12f 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -303,8 +303,8 @@ calling media_entity_init(): err = media_entity_init(&sd->entity, npads, pads); The pads array must have been previously initialized. There is no need to -manually set the struct media_entity type and name fields, but the revision -field must be initialized if needed. +manually set the struct media_entity function and name fields, but the +revision field must be initialized if needed. A reference to the entity will be automatically acquired/released when the subdev device node (if any) is opened/closed. diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c index bc650c637fc0..f6fc95d1345b 100644 --- a/drivers/media/dvb-core/dvbdev.c +++ b/drivers/media/dvb-core/dvbdev.c @@ -242,7 +242,7 @@ static int dvb_create_tsout_entity(struct dvb_device *dvbdev, if (!entity->name) return -ENOMEM; - entity->type = MEDIA_ENT_T_DVB_TSOUT; + entity->function = MEDIA_ENT_T_DVB_TSOUT; pads->flags = MEDIA_PAD_FL_SINK; ret = media_entity_init(entity, 1, pads); @@ -315,18 +315,18 @@ static int dvb_create_media_entity(struct dvb_device *dvbdev, switch (type) { case DVB_DEVICE_FRONTEND: - dvbdev->entity->type = MEDIA_ENT_T_DVB_DEMOD; + dvbdev->entity->function = MEDIA_ENT_T_DVB_DEMOD; dvbdev->pads[0].flags = MEDIA_PAD_FL_SINK; dvbdev->pads[1].flags = MEDIA_PAD_FL_SOURCE; break; case DVB_DEVICE_DEMUX: - dvbdev->entity->type = MEDIA_ENT_T_DVB_DEMUX; + dvbdev->entity->function = MEDIA_ENT_T_DVB_DEMUX; dvbdev->pads[0].flags = MEDIA_PAD_FL_SINK; for (i = 1; i < npads; i++) dvbdev->pads[i].flags = MEDIA_PAD_FL_SOURCE; break; case DVB_DEVICE_CA: - dvbdev->entity->type = MEDIA_ENT_T_DVB_CA; + dvbdev->entity->function = MEDIA_ENT_T_DVB_CA; dvbdev->pads[0].flags = MEDIA_PAD_FL_SINK; dvbdev->pads[1].flags = MEDIA_PAD_FL_SOURCE; break; @@ -555,7 +555,7 @@ int dvb_create_media_graph(struct dvb_adapter *adap) return 0; media_device_for_each_entity(entity, mdev) { - switch (entity->type) { + switch (entity->function) { case MEDIA_ENT_T_V4L2_SUBDEV_TUNER: tuner = entity; break; @@ -594,7 +594,7 @@ int dvb_create_media_graph(struct dvb_adapter *adap) /* Create demux links for each ringbuffer/pad */ if (demux) { media_device_for_each_entity(entity, mdev) { - if (entity->type == MEDIA_ENT_T_DVB_TSOUT) { + if (entity->function == MEDIA_ENT_T_DVB_TSOUT) { if (!strncmp(entity->name, DVR_TSOUT, strlen(DVR_TSOUT))) { ret = media_create_pad_link(demux, @@ -639,7 +639,7 @@ int dvb_create_media_graph(struct dvb_adapter *adap) } media_device_for_each_entity(entity, mdev) { - if (entity->type == MEDIA_ENT_T_DVB_TSOUT) { + if (entity->function == MEDIA_ENT_T_DVB_TSOUT) { if (!strcmp(entity->name, DVR_TSOUT)) { link = media_create_intf_link(entity, intf, diff --git a/drivers/media/dvb-frontends/au8522_decoder.c b/drivers/media/dvb-frontends/au8522_decoder.c index 580859c89da1..664ec0dcd02a 100644 --- a/drivers/media/dvb-frontends/au8522_decoder.c +++ b/drivers/media/dvb-frontends/au8522_decoder.c @@ -766,7 +766,7 @@ static int au8522_probe(struct i2c_client *client, state->pads[AU8522_PAD_INPUT].flags = MEDIA_PAD_FL_SINK; state->pads[AU8522_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE; state->pads[AU8522_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE; - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_DECODER; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_DECODER; ret = media_entity_init(&sd->entity, ARRAY_SIZE(state->pads), state->pads); diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c index 07e46b5b849c..9d99182cd165 100644 --- a/drivers/media/i2c/adp1653.c +++ b/drivers/media/i2c/adp1653.c @@ -516,7 +516,7 @@ static int adp1653_probe(struct i2c_client *client, if (ret < 0) goto free_and_quit; - flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; + flash->subdev.entity.function = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; return 0; diff --git a/drivers/media/i2c/as3645a.c b/drivers/media/i2c/as3645a.c index b83c7fc988ae..f45108c84f4d 100644 --- a/drivers/media/i2c/as3645a.c +++ b/drivers/media/i2c/as3645a.c @@ -831,7 +831,7 @@ static int as3645a_probe(struct i2c_client *client, if (ret < 0) goto done; - flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; + flash->subdev.entity.function = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; mutex_init(&flash->power_lock); diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c index 022ad5ae8869..73bd05ee2fee 100644 --- a/drivers/media/i2c/cx25840/cx25840-core.c +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -5211,7 +5211,7 @@ static int cx25840_probe(struct i2c_client *client, state->pads[CX25840_PAD_INPUT].flags = MEDIA_PAD_FL_SINK; state->pads[CX25840_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE; state->pads[CX25840_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE; - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_DECODER; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_DECODER; ret = media_entity_init(&sd->entity, ARRAY_SIZE(state->pads), state->pads); diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c index 91c1ed27a458..aa8b4832a1bc 100644 --- a/drivers/media/i2c/lm3560.c +++ b/drivers/media/i2c/lm3560.c @@ -368,7 +368,7 @@ static int lm3560_subdev_init(struct lm3560_flash *flash, rval = media_entity_init(&flash->subdev_led[led_no].entity, 0, NULL); if (rval < 0) goto err_out; - flash->subdev_led[led_no].entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; + flash->subdev_led[led_no].entity.function = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; return rval; diff --git a/drivers/media/i2c/lm3646.c b/drivers/media/i2c/lm3646.c index a037616bbab0..a52cc3a6fb55 100644 --- a/drivers/media/i2c/lm3646.c +++ b/drivers/media/i2c/lm3646.c @@ -285,7 +285,7 @@ static int lm3646_subdev_init(struct lm3646_flash *flash) rval = media_entity_init(&flash->subdev_led.entity, 0, NULL); if (rval < 0) goto err_out; - flash->subdev_led.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; + flash->subdev_led.entity.function = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; return rval; err_out: diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c index 0788c1908f9c..ae5645fe3a6e 100644 --- a/drivers/media/i2c/m5mols/m5mols_core.c +++ b/drivers/media/i2c/m5mols/m5mols_core.c @@ -978,7 +978,7 @@ static int m5mols_probe(struct i2c_client *client, ret = media_entity_init(&sd->entity, 1, &info->pad); if (ret < 0) return ret; - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; init_waitqueue_head(&info->irq_waitq); mutex_init(&info->lock); diff --git a/drivers/media/i2c/noon010pc30.c b/drivers/media/i2c/noon010pc30.c index 2e614ad473f1..0226fc668529 100644 --- a/drivers/media/i2c/noon010pc30.c +++ b/drivers/media/i2c/noon010pc30.c @@ -779,7 +779,7 @@ static int noon010_probe(struct i2c_client *client, goto np_err; info->pad.flags = MEDIA_PAD_FL_SOURCE; - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; ret = media_entity_init(&sd->entity, 1, &info->pad); if (ret < 0) goto np_err; diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c index ea95f854a519..8a2efe2a24c4 100644 --- a/drivers/media/i2c/ov2659.c +++ b/drivers/media/i2c/ov2659.c @@ -1445,7 +1445,7 @@ static int ov2659_probe(struct i2c_client *client, #if defined(CONFIG_MEDIA_CONTROLLER) ov2659->pad.flags = MEDIA_PAD_FL_SOURCE; - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; ret = media_entity_init(&sd->entity, 1, &ov2659->pad); if (ret < 0) { v4l2_ctrl_handler_free(&ov2659->ctrls); diff --git a/drivers/media/i2c/ov9650.c b/drivers/media/i2c/ov9650.c index b4c408f2a2b0..27c4def7e4fc 100644 --- a/drivers/media/i2c/ov9650.c +++ b/drivers/media/i2c/ov9650.c @@ -1500,7 +1500,7 @@ static int ov965x_probe(struct i2c_client *client, return ret; ov965x->pad.flags = MEDIA_PAD_FL_SOURCE; - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; ret = media_entity_init(&sd->entity, 1, &ov965x->pad); if (ret < 0) return ret; diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c index ee7404ee6659..dd48e35ede28 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c @@ -1688,7 +1688,7 @@ static int s5c73m3_probe(struct i2c_client *client, state->sensor_pads[S5C73M3_JPEG_PAD].flags = MEDIA_PAD_FL_SOURCE; state->sensor_pads[S5C73M3_ISP_PAD].flags = MEDIA_PAD_FL_SOURCE; - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; ret = media_entity_init(&sd->entity, S5C73M3_NUM_PADS, state->sensor_pads); @@ -1704,7 +1704,7 @@ static int s5c73m3_probe(struct i2c_client *client, state->oif_pads[OIF_ISP_PAD].flags = MEDIA_PAD_FL_SINK; state->oif_pads[OIF_JPEG_PAD].flags = MEDIA_PAD_FL_SINK; state->oif_pads[OIF_SOURCE_PAD].flags = MEDIA_PAD_FL_SOURCE; - oif_sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN; + oif_sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN; ret = media_entity_init(&oif_sd->entity, OIF_NUM_PADS, state->oif_pads); diff --git a/drivers/media/i2c/s5k4ecgx.c b/drivers/media/i2c/s5k4ecgx.c index 445a89e30949..026d08740537 100644 --- a/drivers/media/i2c/s5k4ecgx.c +++ b/drivers/media/i2c/s5k4ecgx.c @@ -961,7 +961,7 @@ static int s5k4ecgx_probe(struct i2c_client *client, sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; priv->pad.flags = MEDIA_PAD_FL_SOURCE; - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; ret = media_entity_init(&sd->entity, 1, &priv->pad); if (ret) return ret; diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c index 3e929858d5be..1d47b30953a4 100644 --- a/drivers/media/i2c/s5k5baf.c +++ b/drivers/media/i2c/s5k5baf.c @@ -408,7 +408,7 @@ static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) static inline bool s5k5baf_is_cis_subdev(struct v4l2_subdev *sd) { - return sd->entity.type == MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + return sd->entity.function == MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; } static inline struct s5k5baf *to_s5k5baf(struct v4l2_subdev *sd) @@ -1904,7 +1904,7 @@ static int s5k5baf_configure_subdevs(struct s5k5baf *state, sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; state->cis_pad.flags = MEDIA_PAD_FL_SOURCE; - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; ret = media_entity_init(&sd->entity, NUM_CIS_PADS, &state->cis_pad); if (ret < 0) goto err; @@ -1919,7 +1919,7 @@ static int s5k5baf_configure_subdevs(struct s5k5baf *state, state->pads[PAD_CIS].flags = MEDIA_PAD_FL_SINK; state->pads[PAD_OUT].flags = MEDIA_PAD_FL_SOURCE; - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN; ret = media_entity_init(&sd->entity, NUM_ISP_PADS, state->pads); if (!ret) diff --git a/drivers/media/i2c/s5k6aa.c b/drivers/media/i2c/s5k6aa.c index 31be29d25093..d7244234473e 100644 --- a/drivers/media/i2c/s5k6aa.c +++ b/drivers/media/i2c/s5k6aa.c @@ -1577,7 +1577,7 @@ static int s5k6aa_probe(struct i2c_client *client, sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; s5k6aa->pad.flags = MEDIA_PAD_FL_SOURCE; - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; ret = media_entity_init(&sd->entity, 1, &s5k6aa->pad); if (ret) return ret; diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c index df4f8824c344..ef325b653697 100644 --- a/drivers/media/i2c/smiapp/smiapp-core.c +++ b/drivers/media/i2c/smiapp/smiapp-core.c @@ -2763,7 +2763,7 @@ static int smiapp_init(struct smiapp_sensor *sensor) dev_dbg(&client->dev, "profile %d\n", sensor->minfo.smiapp_profile); - sensor->pixel_array->sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + sensor->pixel_array->sd.entity.function = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; /* final steps */ smiapp_read_frame_fmt(sensor); diff --git a/drivers/media/media-device.c b/drivers/media/media-device.c index 30cef8740afa..4f8388423edc 100644 --- a/drivers/media/media-device.c +++ b/drivers/media/media-device.c @@ -108,7 +108,7 @@ static long media_device_enum_entities(struct media_device *mdev, u_ent.id = media_entity_id(ent); if (ent->name) strlcpy(u_ent.name, ent->name, sizeof(u_ent.name)); - u_ent.type = ent->type; + u_ent.type = ent->function; u_ent.revision = ent->revision; u_ent.flags = ent->flags; u_ent.group_id = ent->group_id; @@ -610,8 +610,8 @@ int __must_check media_device_register_entity(struct media_device *mdev, { int i; - if (entity->type == MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN || - entity->type == MEDIA_ENT_T_UNKNOWN) + if (entity->function == MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN || + entity->function == MEDIA_ENT_T_UNKNOWN) dev_warn(mdev->dev, "Entity type for entity %s was not initialized!\n", entity->name); diff --git a/drivers/media/platform/xilinx/xilinx-dma.c b/drivers/media/platform/xilinx/xilinx-dma.c index b3fb1570b189..1f0043f3ec4d 100644 --- a/drivers/media/platform/xilinx/xilinx-dma.c +++ b/drivers/media/platform/xilinx/xilinx-dma.c @@ -191,7 +191,7 @@ static int xvip_pipeline_validate(struct xvip_pipeline *pipe, while ((entity = media_entity_graph_walk_next(&graph))) { struct xvip_dma *dma; - if (entity->type != MEDIA_ENT_T_V4L2_VIDEO) + if (entity->function != MEDIA_ENT_T_V4L2_VIDEO) continue; dma = to_xvip_dma(media_entity_to_video_device(entity)); diff --git a/drivers/media/usb/au0828/au0828-core.c b/drivers/media/usb/au0828/au0828-core.c index 27679e5cdca1..865d68dc4dc8 100644 --- a/drivers/media/usb/au0828/au0828-core.c +++ b/drivers/media/usb/au0828/au0828-core.c @@ -265,7 +265,7 @@ static int au0828_create_media_graph(struct au0828_dev *dev) return 0; media_device_for_each_entity(entity, mdev) { - switch (entity->type) { + switch (entity->function) { case MEDIA_ENT_T_V4L2_SUBDEV_TUNER: tuner = entity; break; diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c index 75f2e02908f4..066ba4b7c746 100644 --- a/drivers/media/usb/au0828/au0828-video.c +++ b/drivers/media/usb/au0828/au0828-video.c @@ -1832,18 +1832,18 @@ static void au0828_analog_create_entities(struct au0828_dev *dev) switch (AUVI_INPUT(i).type) { case AU0828_VMUX_COMPOSITE: - ent->type = MEDIA_ENT_T_CONN_COMPOSITE; + ent->function = MEDIA_ENT_T_CONN_COMPOSITE; break; case AU0828_VMUX_SVIDEO: - ent->type = MEDIA_ENT_T_CONN_SVIDEO; + ent->function = MEDIA_ENT_T_CONN_SVIDEO; break; case AU0828_VMUX_CABLE: case AU0828_VMUX_TELEVISION: case AU0828_VMUX_DVB: - ent->type = MEDIA_ENT_T_CONN_RF; + ent->function = MEDIA_ENT_T_CONN_RF; break; default: /* AU0828_VMUX_DEBUG */ - ent->type = MEDIA_ENT_T_CONN_TEST; + ent->function = MEDIA_ENT_T_CONN_TEST; break; } diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index b842bfc799cc..5062c42a694c 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -1249,7 +1249,7 @@ static int cx231xx_create_media_graph(struct cx231xx *dev) return 0; media_device_for_each_entity(entity, mdev) { - switch (entity->type) { + switch (entity->function) { case MEDIA_ENT_T_V4L2_SUBDEV_TUNER: tuner = entity; break; diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c index b5eb9f613872..110359deab37 100644 --- a/drivers/media/usb/cx231xx/cx231xx-video.c +++ b/drivers/media/usb/cx231xx/cx231xx-video.c @@ -119,7 +119,7 @@ static int cx231xx_enable_analog_tuner(struct cx231xx *dev) * this should be enough for the actual needs. */ media_device_for_each_entity(entity, mdev) { - if (entity->type == MEDIA_ENT_T_V4L2_SUBDEV_DECODER) { + if (entity->function == MEDIA_ENT_T_V4L2_SUBDEV_DECODER) { decoder = entity; break; } diff --git a/drivers/media/v4l2-core/tuner-core.c b/drivers/media/v4l2-core/tuner-core.c index b90f2a52db96..e8fc5ec8fc35 100644 --- a/drivers/media/v4l2-core/tuner-core.c +++ b/drivers/media/v4l2-core/tuner-core.c @@ -698,7 +698,7 @@ register_client: #if defined(CONFIG_MEDIA_CONTROLLER) t->pad[TUNER_PAD_RF_INPUT].flags = MEDIA_PAD_FL_SINK; t->pad[TUNER_PAD_IF_OUTPUT].flags = MEDIA_PAD_FL_SOURCE; - t->sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_TUNER; + t->sd.entity.function = MEDIA_ENT_T_V4L2_SUBDEV_TUNER; t->sd.entity.name = t->name; ret = media_entity_init(&t->sd.entity, TUNER_NUM_PADS, &t->pad[0]); diff --git a/drivers/media/v4l2-core/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c index d36436582de9..965449958e97 100644 --- a/drivers/media/v4l2-core/v4l2-dev.c +++ b/drivers/media/v4l2-core/v4l2-dev.c @@ -197,7 +197,7 @@ static void v4l2_device_release(struct device *cd) if (v4l2_dev->mdev) { /* Remove interfaces and interface links */ media_devnode_remove(vdev->intf_devnode); - if (vdev->entity.type != MEDIA_ENT_T_UNKNOWN) + if (vdev->entity.function != MEDIA_ENT_T_UNKNOWN) media_device_unregister_entity(&vdev->entity); } #endif @@ -735,20 +735,20 @@ static int video_register_media_controller(struct video_device *vdev, int type) if (!vdev->v4l2_dev->mdev) return 0; - vdev->entity.type = MEDIA_ENT_T_UNKNOWN; + vdev->entity.function = MEDIA_ENT_T_UNKNOWN; switch (type) { case VFL_TYPE_GRABBER: intf_type = MEDIA_INTF_T_V4L_VIDEO; - vdev->entity.type = MEDIA_ENT_T_V4L2_VIDEO; + vdev->entity.function = MEDIA_ENT_T_V4L2_VIDEO; break; case VFL_TYPE_VBI: intf_type = MEDIA_INTF_T_V4L_VBI; - vdev->entity.type = MEDIA_ENT_T_V4L2_VBI; + vdev->entity.function = MEDIA_ENT_T_V4L2_VBI; break; case VFL_TYPE_SDR: intf_type = MEDIA_INTF_T_V4L_SWRADIO; - vdev->entity.type = MEDIA_ENT_T_V4L2_SWRADIO; + vdev->entity.function = MEDIA_ENT_T_V4L2_SWRADIO; break; case VFL_TYPE_RADIO: intf_type = MEDIA_INTF_T_V4L_RADIO; @@ -766,7 +766,7 @@ static int video_register_media_controller(struct video_device *vdev, int type) return 0; } - if (vdev->entity.type != MEDIA_ENT_T_UNKNOWN) { + if (vdev->entity.function != MEDIA_ENT_T_UNKNOWN) { vdev->entity.name = vdev->name; /* Needed just for backward compatibility with legacy MC API */ @@ -793,7 +793,7 @@ static int video_register_media_controller(struct video_device *vdev, int type) return -ENOMEM; } - if (vdev->entity.type != MEDIA_ENT_T_UNKNOWN) { + if (vdev->entity.function != MEDIA_ENT_T_UNKNOWN) { struct media_link *link; link = media_create_intf_link(&vdev->entity, diff --git a/drivers/media/v4l2-core/v4l2-flash-led-class.c b/drivers/media/v4l2-core/v4l2-flash-led-class.c index 34c489fed55e..cf7b3cb9a373 100644 --- a/drivers/media/v4l2-core/v4l2-flash-led-class.c +++ b/drivers/media/v4l2-core/v4l2-flash-led-class.c @@ -655,7 +655,7 @@ struct v4l2_flash *v4l2_flash_init( if (ret < 0) return ERR_PTR(ret); - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; ret = v4l2_flash_init_controls(v4l2_flash, config); if (ret < 0) diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c index b3bcc8253182..b440cb66669c 100644 --- a/drivers/media/v4l2-core/v4l2-subdev.c +++ b/drivers/media/v4l2-core/v4l2-subdev.c @@ -535,9 +535,9 @@ v4l2_subdev_link_validate_get_format(struct media_pad *pad, return v4l2_subdev_call(sd, pad, get_fmt, NULL, fmt); } - WARN(pad->entity->type != MEDIA_ENT_T_V4L2_VIDEO, + WARN(pad->entity->function != MEDIA_ENT_T_V4L2_VIDEO, "Driver bug! Wrong media entity type 0x%08x, entity %s\n", - pad->entity->type, pad->entity->name); + pad->entity->function, pad->entity->name); return -EINVAL; } @@ -584,7 +584,7 @@ void v4l2_subdev_init(struct v4l2_subdev *sd, const struct v4l2_subdev_ops *ops) sd->host_priv = NULL; #if defined(CONFIG_MEDIA_CONTROLLER) sd->entity.name = sd->name; - sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN; + sd->entity.function = MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN; #endif } EXPORT_SYMBOL(v4l2_subdev_init); diff --git a/include/media/media-entity.h b/include/media/media-entity.h index 0c7390d2edae..70ccd6cf14c1 100644 --- a/include/media/media-entity.h +++ b/include/media/media-entity.h @@ -152,7 +152,8 @@ struct media_entity_operations { * * @graph_obj: Embedded structure containing the media object common data. * @name: Entity name. - * @type: Entity type, as defined in uapi/media.h (MEDIA_ENT_T_*) + * @function: Entity main function, as defined in uapi/media.h + * (MEDIA_ENT_F_*) * @revision: Entity revision - OBSOLETE - should be removed soon. * @flags: Entity flags, as defined in uapi/media.h (MEDIA_ENT_FL_*) * @group_id: Entity group ID - OBSOLETE - should be removed soon. @@ -179,7 +180,7 @@ struct media_entity_operations { struct media_entity { struct media_gobj graph_obj; /* must be first field in struct */ const char *name; - u32 type; + u32 function; u32 revision; unsigned long flags; u32 group_id; @@ -272,7 +273,7 @@ static inline bool is_media_entity_v4l2_io(struct media_entity *entity) if (!entity) return false; - switch (entity->type) { + switch (entity->function) { case MEDIA_ENT_T_V4L2_VIDEO: case MEDIA_ENT_T_V4L2_VBI: case MEDIA_ENT_T_V4L2_SWRADIO: @@ -287,7 +288,7 @@ static inline bool is_media_entity_v4l2_subdev(struct media_entity *entity) if (!entity) return false; - switch (entity->type) { + switch (entity->function) { case MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN: case MEDIA_ENT_T_V4L2_SUBDEV_SENSOR: case MEDIA_ENT_T_V4L2_SUBDEV_FLASH: -- cgit v1.2.3 From bd3ed12be1e1262adcb733bcf63e5da4d8772774 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 6 Sep 2015 12:30:43 -0300 Subject: [media] DocBook: update entities documentation Due to the rename, the documentation became outdated. Update it to reflect what's there at media.h. Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- .../DocBook/media/v4l/media-ioc-enum-entities.xml | 64 ++++++++++++++-------- 1 file changed, 40 insertions(+), 24 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml index 13d0b5891fb7..27f8817e7abe 100644 --- a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml +++ b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml @@ -179,56 +179,72 @@ - MEDIA_ENT_T_UNKNOWN and MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN + MEDIA_ENT_F_UNKNOWN and MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN Unknown entity. That generally indicates that a driver didn't initialize properly the entity, with is a Kernel bug - MEDIA_ENT_T_V4L2_VIDEO - V4L video streaming input or output entity + MEDIA_ENT_F_IO_V4L + Data streaming input and/or output entity. - MEDIA_ENT_T_V4L2_VBI + MEDIA_ENT_F_IO_VBI V4L VBI streaming input or output entity - MEDIA_ENT_T_V4L2_SWRADIO + MEDIA_ENT_F_IO_SWRADIO V4L Software Digital Radio (SDR) streaming input or output entity - MEDIA_ENT_T_DVB_DEMOD - DVB demodulator entity + MEDIA_ENT_F_IO_DTV + DVB Digital TV streaming input or output entity - MEDIA_ENT_T_DVB_DEMUX - DVB demux entity. Can be implemented in hardware or in Kernelspace + MEDIA_ENT_F_DTV_DEMOD + Digital TV demodulator entity. - MEDIA_ENT_T_DVB_TSOUT - DVB Transport Stream output entity + MEDIA_ENT_F_MPEG_TS_DEMUX + MPEG Transport stream demux entity. Could be implemented on hardware or in Kernelspace by the Linux DVB subsystem. - MEDIA_ENT_T_DVB_CA - DVB Conditional Access module (CAM) entity + MEDIA_ENT_F_DTV_CA + Digital TV Conditional Access module (CAM) entity - MEDIA_ENT_T_DVB_DEMOD_NET_DECAP - DVB network ULE/MLE de-encapsulation entity. Can be implemented in hardware or in Kernelspace + MEDIA_ENT_F_DTV_NET_DECAP + Digital TV network ULE/MLE desencapsulation entity. Could be implemented on hardware or in Kernelspace - MEDIA_ENT_T_V4L2_SUBDEV_SENSOR - Camera image sensor entity + MEDIA_ENT_F_CONN_RF + Connector for a Radio Frequency (RF) signal. - MEDIA_ENT_T_V4L2_SUBDEV_FLASH - Flash controller entity + MEDIA_ENT_F_CONN_SVIDEO + Connector for a S-Video signal. - MEDIA_ENT_T_V4L2_SUBDEV_LENS - Lens controller entity + MEDIA_ENT_F_CONN_COMPOSITE + Connector for a RGB composite signal. - MEDIA_ENT_T_V4L2_SUBDEV_DECODER + MEDIA_ENT_F_CONN_TEST + Connector for a test generator. + + + MEDIA_ENT_F_CAM_SENSOR + Camera video sensor entity. + + + MEDIA_ENT_F_FLASH + Flash controller entity. + + + MEDIA_ENT_F_LENS + Lens controller entity. + + + MEDIA_ENT_F_ATV_DECODER Analog video decoder, the basic function of the video decoder is to accept analogue video from a wide variety of sources such as broadcast, DVD players, cameras and video cassette recorders, in @@ -238,8 +254,8 @@ signals. - MEDIA_ENT_T_V4L2_SUBDEV_TUNER - Digital TV, analog TV, radio and/or software radio tuner + MEDIA_ENT_F_TUNER + Digital TV, analog TV, radio and/or software radio tuner. -- cgit v1.2.3 From ab22e77cd3d3073c8cac51b59713ef635678dfbe Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 11 Dec 2015 07:44:40 -0200 Subject: [media] media framework: rename pads init function to media_entity_pads_init() With the MC next gen rework, what's left for media_entity_init() is to just initialize the PADs. However, certain devices, like a FLASH led/light doesn't have any input or output PAD. So, there's no reason why calling media_entity_init() would be mandatory. Also, despite its name, what this function actually does is to initialize the PADs data. So, rename it to media_entity_pads_init() in order to reflect that. The media entity actual init happens during entity register, at media_device_register_entity(). We should move init of num_links and num_backlinks to it. Signed-off-by: Mauro Carvalho Chehab --- Documentation/media-framework.txt | 18 +++++++++++------- Documentation/video4linux/v4l2-framework.txt | 8 ++++---- Documentation/zh_CN/video4linux/v4l2-framework.txt | 8 ++++---- drivers/media/dvb-core/dvbdev.c | 4 ++-- drivers/media/dvb-frontends/au8522_decoder.c | 2 +- drivers/media/i2c/ad9389b.c | 2 +- drivers/media/i2c/adp1653.c | 2 +- drivers/media/i2c/adv7180.c | 2 +- drivers/media/i2c/adv7511.c | 2 +- drivers/media/i2c/adv7604.c | 2 +- drivers/media/i2c/adv7842.c | 2 +- drivers/media/i2c/as3645a.c | 2 +- drivers/media/i2c/cx25840/cx25840-core.c | 2 +- drivers/media/i2c/lm3560.c | 2 +- drivers/media/i2c/lm3646.c | 2 +- drivers/media/i2c/m5mols/m5mols_core.c | 2 +- drivers/media/i2c/mt9m032.c | 2 +- drivers/media/i2c/mt9p031.c | 2 +- drivers/media/i2c/mt9t001.c | 2 +- drivers/media/i2c/mt9v032.c | 2 +- drivers/media/i2c/noon010pc30.c | 2 +- drivers/media/i2c/ov2659.c | 2 +- drivers/media/i2c/ov9650.c | 2 +- drivers/media/i2c/s5c73m3/s5c73m3-core.c | 4 ++-- drivers/media/i2c/s5k4ecgx.c | 2 +- drivers/media/i2c/s5k5baf.c | 4 ++-- drivers/media/i2c/s5k6a3.c | 2 +- drivers/media/i2c/s5k6aa.c | 2 +- drivers/media/i2c/smiapp/smiapp-core.c | 6 +++--- drivers/media/i2c/tc358743.c | 2 +- drivers/media/i2c/tvp514x.c | 2 +- drivers/media/i2c/tvp7002.c | 2 +- drivers/media/media-device.c | 2 ++ drivers/media/media-entity.c | 11 ++++------- drivers/media/platform/exynos4-is/fimc-capture.c | 4 ++-- drivers/media/platform/exynos4-is/fimc-isp-video.c | 2 +- drivers/media/platform/exynos4-is/fimc-isp.c | 2 +- drivers/media/platform/exynos4-is/fimc-lite.c | 4 ++-- drivers/media/platform/exynos4-is/fimc-m2m.c | 2 +- drivers/media/platform/exynos4-is/mipi-csis.c | 2 +- drivers/media/platform/omap3isp/ispccdc.c | 2 +- drivers/media/platform/omap3isp/ispccp2.c | 2 +- drivers/media/platform/omap3isp/ispcsi2.c | 2 +- drivers/media/platform/omap3isp/isppreview.c | 2 +- drivers/media/platform/omap3isp/ispresizer.c | 2 +- drivers/media/platform/omap3isp/ispstat.c | 2 +- drivers/media/platform/omap3isp/ispvideo.c | 2 +- drivers/media/platform/s3c-camif/camif-capture.c | 4 ++-- drivers/media/platform/vsp1/vsp1_entity.c | 2 +- drivers/media/platform/vsp1/vsp1_video.c | 2 +- drivers/media/platform/xilinx/xilinx-dma.c | 2 +- drivers/media/platform/xilinx/xilinx-tpg.c | 2 +- drivers/media/usb/au0828/au0828-video.c | 6 +++--- drivers/media/usb/cx231xx/cx231xx-video.c | 4 ++-- drivers/media/usb/uvc/uvc_entity.c | 4 ++-- drivers/media/v4l2-core/tuner-core.c | 2 +- drivers/media/v4l2-core/v4l2-flash-led-class.c | 2 +- drivers/staging/media/davinci_vpfe/dm365_ipipe.c | 2 +- drivers/staging/media/davinci_vpfe/dm365_ipipeif.c | 2 +- drivers/staging/media/davinci_vpfe/dm365_isif.c | 2 +- drivers/staging/media/davinci_vpfe/dm365_resizer.c | 6 +++--- drivers/staging/media/davinci_vpfe/vpfe_video.c | 2 +- drivers/staging/media/omap4iss/iss_csi2.c | 2 +- drivers/staging/media/omap4iss/iss_ipipe.c | 2 +- drivers/staging/media/omap4iss/iss_ipipeif.c | 2 +- drivers/staging/media/omap4iss/iss_resizer.c | 2 +- drivers/staging/media/omap4iss/iss_video.c | 2 +- include/media/media-entity.h | 2 +- 68 files changed, 102 insertions(+), 99 deletions(-) (limited to 'Documentation') diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt index b424de6c3bb3..7fbfe4bd1f47 100644 --- a/Documentation/media-framework.txt +++ b/Documentation/media-framework.txt @@ -101,14 +101,18 @@ include/media/media-entity.h. The structure is usually embedded into a higher-level structure, such as a v4l2_subdev or video_device instance, although drivers can allocate entities directly. -Drivers initialize entities by calling +Drivers initialize entity pads by calling - media_entity_init(struct media_entity *entity, u16 num_pads, + media_entity_pads_init(struct media_entity *entity, u16 num_pads, struct media_pad *pads); -The media_entity name, type, flags, revision and group_id fields can be -initialized before or after calling media_entity_init. Entities embedded in -higher-level standard structures can have some of those fields set by the +If no pads are needed, drivers could directly fill entity->num_pads +with 0 and entity->pads with NULL or to call the above function that +will do the same. + +The media_entity name, type, flags, revision and group_id fields should be +initialized before calling media_device_register_entity(). Entities embedded +in higher-level standard structures can have some of those fields set by the higher-level framework. As the number of pads is known in advance, the pads array is not allocated @@ -116,10 +120,10 @@ dynamically but is managed by the entity driver. Most drivers will embed the pads array in a driver-specific structure, avoiding dynamic allocation. Drivers must set the direction of every pad in the pads array before calling -media_entity_init. The function will initialize the other pads fields. +media_entity_pads_init. The function will initialize the other pads fields. Unlike the number of pads, the total number of links isn't always known in -advance by the entity driver. As an initial estimate, media_entity_init +advance by the entity driver. As an initial estimate, media_entity_pads_init pre-allocates a number of links equal to the number of pads. The links array will be reallocated if it grows beyond the initial estimate. diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 2e0fc28fa12f..fa41608ab2b4 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -295,12 +295,12 @@ module owner. This is done for you if you use the i2c helper functions. If integration with the media framework is needed, you must initialize the media_entity struct embedded in the v4l2_subdev struct (entity field) by -calling media_entity_init(): +calling media_entity_pads_init(), if the entity has pads: struct media_pad *pads = &my_sd->pads; int err; - err = media_entity_init(&sd->entity, npads, pads); + err = media_entity_pads_init(&sd->entity, npads, pads); The pads array must have been previously initialized. There is no need to manually set the struct media_entity function and name fields, but the @@ -695,12 +695,12 @@ difference is that the inode argument is omitted since it is never used. If integration with the media framework is needed, you must initialize the media_entity struct embedded in the video_device struct (entity field) by -calling media_entity_init(): +calling media_entity_pads_init(): struct media_pad *pad = &my_vdev->pad; int err; - err = media_entity_init(&vdev->entity, 1, pad); + err = media_entity_pads_init(&vdev->entity, 1, pad); The pads array must have been previously initialized. There is no need to manually set the struct media_entity type and name fields. diff --git a/Documentation/zh_CN/video4linux/v4l2-framework.txt b/Documentation/zh_CN/video4linux/v4l2-framework.txt index ff815cb92031..698660b7f21f 100644 --- a/Documentation/zh_CN/video4linux/v4l2-framework.txt +++ b/Documentation/zh_CN/video4linux/v4l2-framework.txt @@ -289,13 +289,13 @@ struct v4l2_subdev_ops { 然后，你必须用一个唯一的名字初始化 subdev->name，并初始化模块的 owner 域。若使用 i2c 辅助函数，这些都会帮你处理好。 -若需同媒体框架整合，你必须调用 media_entity_init() 初始化 v4l2_subdev +若需同媒体框架整合，你必须调用 media_entity_pads_init() 初始化 v4l2_subdev 结构体中的 media_entity 结构体（entity 域）： struct media_pad *pads = &my_sd->pads; int err; - err = media_entity_init(&sd->entity, npads, pads); + err = media_entity_pads_init(&sd->entity, npads, pads); pads 数组必须预先初始化。无须手动设置 media_entity 的 type 和 name 域，但如有必要，revision 域必须初始化。 @@ -596,13 +596,13 @@ void v4l2_disable_ioctl(struct video_device *vdev, unsigned int cmd); v4l2_file_operations 结构体是 file_operations 的一个子集。其主要 区别在于：因 inode 参数从未被使用，它将被忽略。 -如果需要与媒体框架整合，你必须通过调用 media_entity_init() 初始化 +如果需要与媒体框架整合，你必须通过调用 media_entity_pads_init() 初始化 嵌入在 video_device 结构体中的 media_entity（entity 域）结构体： struct media_pad *pad = &my_vdev->pad; int err; - err = media_entity_init(&vdev->entity, 1, pad); + err = media_entity_pads_init(&vdev->entity, 1, pad); pads 数组必须预先初始化。没有必要手动设置 media_entity 的 type 和 name 域。 diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c index 1d4e35693d09..b56e00817d3f 100644 --- a/drivers/media/dvb-core/dvbdev.c +++ b/drivers/media/dvb-core/dvbdev.c @@ -245,7 +245,7 @@ static int dvb_create_tsout_entity(struct dvb_device *dvbdev, entity->function = MEDIA_ENT_F_IO_DTV; pads->flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(entity, 1, pads); + ret = media_entity_pads_init(entity, 1, pads); if (ret < 0) return ret; @@ -340,7 +340,7 @@ static int dvb_create_media_entity(struct dvb_device *dvbdev, } if (npads) { - ret = media_entity_init(dvbdev->entity, npads, dvbdev->pads); + ret = media_entity_pads_init(dvbdev->entity, npads, dvbdev->pads); if (ret) return ret; } diff --git a/drivers/media/dvb-frontends/au8522_decoder.c b/drivers/media/dvb-frontends/au8522_decoder.c index 464a2beca30d..73612c5353d1 100644 --- a/drivers/media/dvb-frontends/au8522_decoder.c +++ b/drivers/media/dvb-frontends/au8522_decoder.c @@ -768,7 +768,7 @@ static int au8522_probe(struct i2c_client *client, state->pads[AU8522_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE; sd->entity.function = MEDIA_ENT_F_ATV_DECODER; - ret = media_entity_init(&sd->entity, ARRAY_SIZE(state->pads), + ret = media_entity_pads_init(&sd->entity, ARRAY_SIZE(state->pads), state->pads); if (ret < 0) { v4l_info(client, "failed to initialize media entity!\n"); diff --git a/drivers/media/i2c/ad9389b.c b/drivers/media/i2c/ad9389b.c index a02dc4925707..788967dadd29 100644 --- a/drivers/media/i2c/ad9389b.c +++ b/drivers/media/i2c/ad9389b.c @@ -1158,7 +1158,7 @@ static int ad9389b_probe(struct i2c_client *client, const struct i2c_device_id * state->rgb_quantization_range_ctrl->is_private = true; state->pad.flags = MEDIA_PAD_FL_SINK; - err = media_entity_init(&sd->entity, 1, &state->pad); + err = media_entity_pads_init(&sd->entity, 1, &state->pad); if (err) goto err_hdl; diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c index 7150f35d5935..7e9cbf757e95 100644 --- a/drivers/media/i2c/adp1653.c +++ b/drivers/media/i2c/adp1653.c @@ -512,7 +512,7 @@ static int adp1653_probe(struct i2c_client *client, if (ret) goto free_and_quit; - ret = media_entity_init(&flash->subdev.entity, 0, NULL); + ret = media_entity_pads_init(&flash->subdev.entity, 0, NULL); if (ret < 0) goto free_and_quit; diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c index 2ebe9efdfc1b..ff57c1dcb8af 100644 --- a/drivers/media/i2c/adv7180.c +++ b/drivers/media/i2c/adv7180.c @@ -1214,7 +1214,7 @@ static int adv7180_probe(struct i2c_client *client, state->pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.flags |= MEDIA_ENT_F_ATV_DECODER; - ret = media_entity_init(&sd->entity, 1, &state->pad); + ret = media_entity_pads_init(&sd->entity, 1, &state->pad); if (ret) goto err_free_ctrl; diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511.c index cbcf81b1d29e..471fd23b5c5c 100644 --- a/drivers/media/i2c/adv7511.c +++ b/drivers/media/i2c/adv7511.c @@ -1482,7 +1482,7 @@ static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id * state->rgb_quantization_range_ctrl->is_private = true; state->pad.flags = MEDIA_PAD_FL_SINK; - err = media_entity_init(&sd->entity, 1, &state->pad); + err = media_entity_pads_init(&sd->entity, 1, &state->pad); if (err) goto err_hdl; diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index c2df7e8053f3..f8dd7505b529 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -3208,7 +3208,7 @@ static int adv76xx_probe(struct i2c_client *client, state->pads[i].flags = MEDIA_PAD_FL_SINK; state->pads[state->source_pad].flags = MEDIA_PAD_FL_SOURCE; - err = media_entity_init(&sd->entity, state->source_pad + 1, + err = media_entity_pads_init(&sd->entity, state->source_pad + 1, state->pads); if (err) goto err_work_queues; diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c index b5013a937254..5fbb788e7b59 100644 --- a/drivers/media/i2c/adv7842.c +++ b/drivers/media/i2c/adv7842.c @@ -3309,7 +3309,7 @@ static int adv7842_probe(struct i2c_client *client, adv7842_delayed_work_enable_hotplug); state->pad.flags = MEDIA_PAD_FL_SOURCE; - err = media_entity_init(&sd->entity, 1, &state->pad); + err = media_entity_pads_init(&sd->entity, 1, &state->pad); if (err) goto err_work_queues; diff --git a/drivers/media/i2c/as3645a.c b/drivers/media/i2c/as3645a.c index b1bc4d0f76f2..2e90e4094b79 100644 --- a/drivers/media/i2c/as3645a.c +++ b/drivers/media/i2c/as3645a.c @@ -827,7 +827,7 @@ static int as3645a_probe(struct i2c_client *client, if (ret < 0) goto done; - ret = media_entity_init(&flash->subdev.entity, 0, NULL); + ret = media_entity_pads_init(&flash->subdev.entity, 0, NULL); if (ret < 0) goto done; diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c index 4d975aa5be36..07a3e7173144 100644 --- a/drivers/media/i2c/cx25840/cx25840-core.c +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -5213,7 +5213,7 @@ static int cx25840_probe(struct i2c_client *client, state->pads[CX25840_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE; sd->entity.function = MEDIA_ENT_F_ATV_DECODER; - ret = media_entity_init(&sd->entity, ARRAY_SIZE(state->pads), + ret = media_entity_pads_init(&sd->entity, ARRAY_SIZE(state->pads), state->pads); if (ret < 0) { v4l_info(client, "failed to initialize media entity!\n"); diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c index 98266f707ea0..251a2aaf98c3 100644 --- a/drivers/media/i2c/lm3560.c +++ b/drivers/media/i2c/lm3560.c @@ -365,7 +365,7 @@ static int lm3560_subdev_init(struct lm3560_flash *flash, rval = lm3560_init_controls(flash, led_no); if (rval) goto err_out; - rval = media_entity_init(&flash->subdev_led[led_no].entity, 0, NULL); + rval = media_entity_pads_init(&flash->subdev_led[led_no].entity, 0, NULL); if (rval < 0) goto err_out; flash->subdev_led[led_no].entity.function = MEDIA_ENT_F_FLASH; diff --git a/drivers/media/i2c/lm3646.c b/drivers/media/i2c/lm3646.c index ba5ee0d7a78e..7e9967af36ec 100644 --- a/drivers/media/i2c/lm3646.c +++ b/drivers/media/i2c/lm3646.c @@ -282,7 +282,7 @@ static int lm3646_subdev_init(struct lm3646_flash *flash) rval = lm3646_init_controls(flash); if (rval) goto err_out; - rval = media_entity_init(&flash->subdev_led.entity, 0, NULL); + rval = media_entity_pads_init(&flash->subdev_led.entity, 0, NULL); if (rval < 0) goto err_out; flash->subdev_led.entity.function = MEDIA_ENT_F_FLASH; diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c index bec5cea23b65..acb804bceccb 100644 --- a/drivers/media/i2c/m5mols/m5mols_core.c +++ b/drivers/media/i2c/m5mols/m5mols_core.c @@ -975,7 +975,7 @@ static int m5mols_probe(struct i2c_client *client, sd->internal_ops = &m5mols_subdev_internal_ops; info->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&sd->entity, 1, &info->pad); + ret = media_entity_pads_init(&sd->entity, 1, &info->pad); if (ret < 0) return ret; sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; diff --git a/drivers/media/i2c/mt9m032.c b/drivers/media/i2c/mt9m032.c index a2a450839ca1..da076796999e 100644 --- a/drivers/media/i2c/mt9m032.c +++ b/drivers/media/i2c/mt9m032.c @@ -799,7 +799,7 @@ static int mt9m032_probe(struct i2c_client *client, sensor->subdev.ctrl_handler = &sensor->ctrls; sensor->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&sensor->subdev.entity, 1, &sensor->pad); + ret = media_entity_pads_init(&sensor->subdev.entity, 1, &sensor->pad); if (ret < 0) goto error_ctrl; diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c index 165f29cddca6..237737fec09c 100644 --- a/drivers/media/i2c/mt9p031.c +++ b/drivers/media/i2c/mt9p031.c @@ -1112,7 +1112,7 @@ static int mt9p031_probe(struct i2c_client *client, mt9p031->subdev.internal_ops = &mt9p031_subdev_internal_ops; mt9p031->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&mt9p031->subdev.entity, 1, &mt9p031->pad); + ret = media_entity_pads_init(&mt9p031->subdev.entity, 1, &mt9p031->pad); if (ret < 0) goto done; diff --git a/drivers/media/i2c/mt9t001.c b/drivers/media/i2c/mt9t001.c index 7d3df84651d8..702d562f8e39 100644 --- a/drivers/media/i2c/mt9t001.c +++ b/drivers/media/i2c/mt9t001.c @@ -933,7 +933,7 @@ static int mt9t001_probe(struct i2c_client *client, mt9t001->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; mt9t001->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&mt9t001->subdev.entity, 1, &mt9t001->pad); + ret = media_entity_pads_init(&mt9t001->subdev.entity, 1, &mt9t001->pad); done: if (ret < 0) { diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c index b4f0f042c6c3..2e1d116a64e7 100644 --- a/drivers/media/i2c/mt9v032.c +++ b/drivers/media/i2c/mt9v032.c @@ -1046,7 +1046,7 @@ static int mt9v032_probe(struct i2c_client *client, mt9v032->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; mt9v032->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&mt9v032->subdev.entity, 1, &mt9v032->pad); + ret = media_entity_pads_init(&mt9v032->subdev.entity, 1, &mt9v032->pad); if (ret < 0) goto err; diff --git a/drivers/media/i2c/noon010pc30.c b/drivers/media/i2c/noon010pc30.c index 47ea3f79eacc..30cb90b88d75 100644 --- a/drivers/media/i2c/noon010pc30.c +++ b/drivers/media/i2c/noon010pc30.c @@ -780,7 +780,7 @@ static int noon010_probe(struct i2c_client *client, info->pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; - ret = media_entity_init(&sd->entity, 1, &info->pad); + ret = media_entity_pads_init(&sd->entity, 1, &info->pad); if (ret < 0) goto np_err; diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c index cf8e71610248..02b9a3440557 100644 --- a/drivers/media/i2c/ov2659.c +++ b/drivers/media/i2c/ov2659.c @@ -1446,7 +1446,7 @@ static int ov2659_probe(struct i2c_client *client, #if defined(CONFIG_MEDIA_CONTROLLER) ov2659->pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; - ret = media_entity_init(&sd->entity, 1, &ov2659->pad); + ret = media_entity_pads_init(&sd->entity, 1, &ov2659->pad); if (ret < 0) { v4l2_ctrl_handler_free(&ov2659->ctrls); return ret; diff --git a/drivers/media/i2c/ov9650.c b/drivers/media/i2c/ov9650.c index adb4aab45c10..a0b3c9bde53d 100644 --- a/drivers/media/i2c/ov9650.c +++ b/drivers/media/i2c/ov9650.c @@ -1501,7 +1501,7 @@ static int ov965x_probe(struct i2c_client *client, ov965x->pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; - ret = media_entity_init(&sd->entity, 1, &ov965x->pad); + ret = media_entity_pads_init(&sd->entity, 1, &ov965x->pad); if (ret < 0) return ret; diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c index 3d578f2ce7b2..57b3d27993a4 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c @@ -1690,7 +1690,7 @@ static int s5c73m3_probe(struct i2c_client *client, state->sensor_pads[S5C73M3_ISP_PAD].flags = MEDIA_PAD_FL_SOURCE; sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; - ret = media_entity_init(&sd->entity, S5C73M3_NUM_PADS, + ret = media_entity_pads_init(&sd->entity, S5C73M3_NUM_PADS, state->sensor_pads); if (ret < 0) return ret; @@ -1706,7 +1706,7 @@ static int s5c73m3_probe(struct i2c_client *client, state->oif_pads[OIF_SOURCE_PAD].flags = MEDIA_PAD_FL_SOURCE; oif_sd->entity.function = MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN; - ret = media_entity_init(&oif_sd->entity, OIF_NUM_PADS, + ret = media_entity_pads_init(&oif_sd->entity, OIF_NUM_PADS, state->oif_pads); if (ret < 0) return ret; diff --git a/drivers/media/i2c/s5k4ecgx.c b/drivers/media/i2c/s5k4ecgx.c index bacec84e773f..8a0f22da590f 100644 --- a/drivers/media/i2c/s5k4ecgx.c +++ b/drivers/media/i2c/s5k4ecgx.c @@ -962,7 +962,7 @@ static int s5k4ecgx_probe(struct i2c_client *client, priv->pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; - ret = media_entity_init(&sd->entity, 1, &priv->pad); + ret = media_entity_pads_init(&sd->entity, 1, &priv->pad); if (ret) return ret; diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c index 564938ab2abd..fc3a5a8e6c9c 100644 --- a/drivers/media/i2c/s5k5baf.c +++ b/drivers/media/i2c/s5k5baf.c @@ -1905,7 +1905,7 @@ static int s5k5baf_configure_subdevs(struct s5k5baf *state, state->cis_pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; - ret = media_entity_init(&sd->entity, NUM_CIS_PADS, &state->cis_pad); + ret = media_entity_pads_init(&sd->entity, NUM_CIS_PADS, &state->cis_pad); if (ret < 0) goto err; @@ -1920,7 +1920,7 @@ static int s5k5baf_configure_subdevs(struct s5k5baf *state, state->pads[PAD_CIS].flags = MEDIA_PAD_FL_SINK; state->pads[PAD_OUT].flags = MEDIA_PAD_FL_SOURCE; sd->entity.function = MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN; - ret = media_entity_init(&sd->entity, NUM_ISP_PADS, state->pads); + ret = media_entity_pads_init(&sd->entity, NUM_ISP_PADS, state->pads); if (!ret) return 0; diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c index 2434a7944781..b9e43ffa5085 100644 --- a/drivers/media/i2c/s5k6a3.c +++ b/drivers/media/i2c/s5k6a3.c @@ -333,7 +333,7 @@ static int s5k6a3_probe(struct i2c_client *client, sensor->format.height = S5K6A3_DEFAULT_HEIGHT; sensor->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&sd->entity, 1, &sensor->pad); + ret = media_entity_pads_init(&sd->entity, 1, &sensor->pad); if (ret < 0) return ret; diff --git a/drivers/media/i2c/s5k6aa.c b/drivers/media/i2c/s5k6aa.c index d71d104441bd..faee11383cb7 100644 --- a/drivers/media/i2c/s5k6aa.c +++ b/drivers/media/i2c/s5k6aa.c @@ -1578,7 +1578,7 @@ static int s5k6aa_probe(struct i2c_client *client, s5k6aa->pad.flags = MEDIA_PAD_FL_SOURCE; sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; - ret = media_entity_init(&sd->entity, 1, &s5k6aa->pad); + ret = media_entity_pads_init(&sd->entity, 1, &s5k6aa->pad); if (ret) return ret; diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c index 3eaa69ee341b..a215efe7a8ba 100644 --- a/drivers/media/i2c/smiapp/smiapp-core.c +++ b/drivers/media/i2c/smiapp/smiapp-core.c @@ -2487,11 +2487,11 @@ static int smiapp_register_subdevs(struct smiapp_sensor *sensor) if (!last) continue; - rval = media_entity_init(&this->sd.entity, + rval = media_entity_pads_init(&this->sd.entity, this->npads, this->pads); if (rval) { dev_err(&client->dev, - "media_entity_init failed\n"); + "media_entity_pads_init failed\n"); return rval; } @@ -3077,7 +3077,7 @@ static int smiapp_probe(struct i2c_client *client, sensor->src->sensor = sensor; sensor->src->pads[0].flags = MEDIA_PAD_FL_SOURCE; - rval = media_entity_init(&sensor->src->sd.entity, 2, + rval = media_entity_pads_init(&sensor->src->sd.entity, 2, sensor->src->pads); if (rval < 0) return rval; diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c index 78e5b644d400..3397eb99c67b 100644 --- a/drivers/media/i2c/tc358743.c +++ b/drivers/media/i2c/tc358743.c @@ -1889,7 +1889,7 @@ static int tc358743_probe(struct i2c_client *client, } state->pad.flags = MEDIA_PAD_FL_SOURCE; - err = media_entity_init(&sd->entity, 1, &state->pad); + err = media_entity_pads_init(&sd->entity, 1, &state->pad); if (err < 0) goto err_hdl; diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c index 455dd4e6a1da..7fa5f1e4fe37 100644 --- a/drivers/media/i2c/tvp514x.c +++ b/drivers/media/i2c/tvp514x.c @@ -1097,7 +1097,7 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) decoder->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; decoder->sd.entity.flags |= MEDIA_ENT_F_ATV_DECODER; - ret = media_entity_init(&decoder->sd.entity, 1, &decoder->pad); + ret = media_entity_pads_init(&decoder->sd.entity, 1, &decoder->pad); if (ret < 0) { v4l2_err(sd, "%s decoder driver failed to register !!\n", sd->name); diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c index 216a07956fe9..83c79fa5f61d 100644 --- a/drivers/media/i2c/tvp7002.c +++ b/drivers/media/i2c/tvp7002.c @@ -1014,7 +1014,7 @@ static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id) device->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; device->sd.entity.flags |= MEDIA_ENT_F_ATV_DECODER; - error = media_entity_init(&device->sd.entity, 1, &device->pad); + error = media_entity_pads_init(&device->sd.entity, 1, &device->pad); if (error < 0) return error; #endif diff --git a/drivers/media/media-device.c b/drivers/media/media-device.c index 14bd568e2f41..b8cd7733a31c 100644 --- a/drivers/media/media-device.c +++ b/drivers/media/media-device.c @@ -623,6 +623,8 @@ int __must_check media_device_register_entity(struct media_device *mdev, WARN_ON(entity->graph_obj.mdev != NULL); entity->graph_obj.mdev = mdev; INIT_LIST_HEAD(&entity->links); + entity->num_links = 0; + entity->num_backlinks = 0; spin_lock(&mdev->lock); /* Initialize media_gobj embedded at the entity */ diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c index 07f2dc6c2df6..ef2102ac0c66 100644 --- a/drivers/media/media-entity.c +++ b/drivers/media/media-entity.c @@ -197,7 +197,7 @@ void media_gobj_remove(struct media_gobj *gobj) } /** - * media_entity_init - Initialize a media entity + * media_entity_pads_init - Initialize a media entity * * @num_pads: Total number of sink and source pads. * @pads: Array of 'num_pads' pads. @@ -216,18 +216,15 @@ void media_gobj_remove(struct media_gobj *gobj) * number of allocated elements. * * The pads array is managed by the entity driver and passed to - * media_entity_init() where its pointer will be stored in the entity structure. + * media_entity_pads_init() where its pointer will be stored in the entity structure. */ int -media_entity_init(struct media_entity *entity, u16 num_pads, +media_entity_pads_init(struct media_entity *entity, u16 num_pads, struct media_pad *pads) { struct media_device *mdev = entity->graph_obj.mdev; unsigned int i; - entity->group_id = 0; - entity->num_links = 0; - entity->num_backlinks = 0; entity->num_pads = num_pads; entity->pads = pads; @@ -247,7 +244,7 @@ media_entity_init(struct media_entity *entity, u16 num_pads, return 0; } -EXPORT_SYMBOL_GPL(media_entity_init); +EXPORT_SYMBOL_GPL(media_entity_pads_init); void media_entity_cleanup(struct media_entity *entity) diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c index 48a826372d3d..bf47d3b9cbe7 100644 --- a/drivers/media/platform/exynos4-is/fimc-capture.c +++ b/drivers/media/platform/exynos4-is/fimc-capture.c @@ -1799,7 +1799,7 @@ static int fimc_register_capture_device(struct fimc_dev *fimc, vid_cap->wb_fmt.code = fmt->mbus_code; vid_cap->vd_pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&vfd->entity, 1, &vid_cap->vd_pad); + ret = media_entity_pads_init(&vfd->entity, 1, &vid_cap->vd_pad); if (ret) goto err_free_ctx; @@ -1891,7 +1891,7 @@ int fimc_initialize_capture_subdev(struct fimc_dev *fimc) fimc->vid_cap.sd_pads[FIMC_SD_PAD_SINK_CAM].flags = MEDIA_PAD_FL_SINK; fimc->vid_cap.sd_pads[FIMC_SD_PAD_SINK_FIFO].flags = MEDIA_PAD_FL_SINK; fimc->vid_cap.sd_pads[FIMC_SD_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&sd->entity, FIMC_SD_PADS_NUM, + ret = media_entity_pads_init(&sd->entity, FIMC_SD_PADS_NUM, fimc->vid_cap.sd_pads); if (ret) return ret; diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c index 9c7794bcf0c3..bf9261eb57a1 100644 --- a/drivers/media/platform/exynos4-is/fimc-isp-video.c +++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c @@ -616,7 +616,7 @@ int fimc_isp_video_device_register(struct fimc_isp *isp, vdev->lock = &isp->video_lock; iv->pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&vdev->entity, 1, &iv->pad); + ret = media_entity_pads_init(&vdev->entity, 1, &iv->pad); if (ret < 0) return ret; diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c index f52eebf765c1..293b807020c4 100644 --- a/drivers/media/platform/exynos4-is/fimc-isp.c +++ b/drivers/media/platform/exynos4-is/fimc-isp.c @@ -708,7 +708,7 @@ int fimc_isp_subdev_create(struct fimc_isp *isp) isp->subdev_pads[FIMC_ISP_SD_PAD_SINK].flags = MEDIA_PAD_FL_SINK; isp->subdev_pads[FIMC_ISP_SD_PAD_SRC_FIFO].flags = MEDIA_PAD_FL_SOURCE; isp->subdev_pads[FIMC_ISP_SD_PAD_SRC_DMA].flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&sd->entity, FIMC_ISP_SD_PADS_NUM, + ret = media_entity_pads_init(&sd->entity, FIMC_ISP_SD_PADS_NUM, isp->subdev_pads); if (ret) return ret; diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c index 957cf144a675..e85649147dc8 100644 --- a/drivers/media/platform/exynos4-is/fimc-lite.c +++ b/drivers/media/platform/exynos4-is/fimc-lite.c @@ -1314,7 +1314,7 @@ static int fimc_lite_subdev_registered(struct v4l2_subdev *sd) return ret; fimc->vd_pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&vfd->entity, 1, &fimc->vd_pad); + ret = media_entity_pads_init(&vfd->entity, 1, &fimc->vd_pad); if (ret < 0) return ret; @@ -1428,7 +1428,7 @@ static int fimc_lite_create_capture_subdev(struct fimc_lite *fimc) fimc->subdev_pads[FLITE_SD_PAD_SINK].flags = MEDIA_PAD_FL_SINK; fimc->subdev_pads[FLITE_SD_PAD_SOURCE_DMA].flags = MEDIA_PAD_FL_SOURCE; fimc->subdev_pads[FLITE_SD_PAD_SOURCE_ISP].flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&sd->entity, FLITE_SD_PADS_NUM, + ret = media_entity_pads_init(&sd->entity, FLITE_SD_PADS_NUM, fimc->subdev_pads); if (ret) return ret; diff --git a/drivers/media/platform/exynos4-is/fimc-m2m.c b/drivers/media/platform/exynos4-is/fimc-m2m.c index 8ff4e6f76b84..55ec4c99d484 100644 --- a/drivers/media/platform/exynos4-is/fimc-m2m.c +++ b/drivers/media/platform/exynos4-is/fimc-m2m.c @@ -739,7 +739,7 @@ int fimc_register_m2m_device(struct fimc_dev *fimc, return PTR_ERR(fimc->m2m.m2m_dev); } - ret = media_entity_init(&vfd->entity, 0, NULL); + ret = media_entity_pads_init(&vfd->entity, 0, NULL); if (ret) goto err_me; diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c index 8847797b0d0b..ac5e50e595be 100644 --- a/drivers/media/platform/exynos4-is/mipi-csis.c +++ b/drivers/media/platform/exynos4-is/mipi-csis.c @@ -866,7 +866,7 @@ static int s5pcsis_probe(struct platform_device *pdev) state->pads[CSIS_PAD_SINK].flags = MEDIA_PAD_FL_SINK; state->pads[CSIS_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&state->sd.entity, + ret = media_entity_pads_init(&state->sd.entity, CSIS_PADS_NUM, state->pads); if (ret < 0) goto e_clkdis; diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c index f0e530c98188..dae674cd3f74 100644 --- a/drivers/media/platform/omap3isp/ispccdc.c +++ b/drivers/media/platform/omap3isp/ispccdc.c @@ -2655,7 +2655,7 @@ static int ccdc_init_entities(struct isp_ccdc_device *ccdc) pads[CCDC_PAD_SOURCE_OF].flags = MEDIA_PAD_FL_SOURCE; me->ops = &ccdc_media_ops; - ret = media_entity_init(me, CCDC_PADS_NUM, pads); + ret = media_entity_pads_init(me, CCDC_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/media/platform/omap3isp/ispccp2.c b/drivers/media/platform/omap3isp/ispccp2.c index ae3038e643cc..0c790b25f6f9 100644 --- a/drivers/media/platform/omap3isp/ispccp2.c +++ b/drivers/media/platform/omap3isp/ispccp2.c @@ -1076,7 +1076,7 @@ static int ccp2_init_entities(struct isp_ccp2_device *ccp2) pads[CCP2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; me->ops = &ccp2_media_ops; - ret = media_entity_init(me, CCP2_PADS_NUM, pads); + ret = media_entity_pads_init(me, CCP2_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/media/platform/omap3isp/ispcsi2.c b/drivers/media/platform/omap3isp/ispcsi2.c index b1617f7efdee..f50f6b305204 100644 --- a/drivers/media/platform/omap3isp/ispcsi2.c +++ b/drivers/media/platform/omap3isp/ispcsi2.c @@ -1250,7 +1250,7 @@ static int csi2_init_entities(struct isp_csi2_device *csi2) | MEDIA_PAD_FL_MUST_CONNECT; me->ops = &csi2_media_ops; - ret = media_entity_init(me, CSI2_PADS_NUM, pads); + ret = media_entity_pads_init(me, CSI2_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/media/platform/omap3isp/isppreview.c b/drivers/media/platform/omap3isp/isppreview.c index cfb2debb02bf..c300cb7219e9 100644 --- a/drivers/media/platform/omap3isp/isppreview.c +++ b/drivers/media/platform/omap3isp/isppreview.c @@ -2287,7 +2287,7 @@ static int preview_init_entities(struct isp_prev_device *prev) pads[PREV_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; me->ops = &preview_media_ops; - ret = media_entity_init(me, PREV_PADS_NUM, pads); + ret = media_entity_pads_init(me, PREV_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/media/platform/omap3isp/ispresizer.c b/drivers/media/platform/omap3isp/ispresizer.c index e3ecf1787fc4..cd0a9f6e1fed 100644 --- a/drivers/media/platform/omap3isp/ispresizer.c +++ b/drivers/media/platform/omap3isp/ispresizer.c @@ -1733,7 +1733,7 @@ static int resizer_init_entities(struct isp_res_device *res) pads[RESZ_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; me->ops = &resizer_media_ops; - ret = media_entity_init(me, RESZ_PADS_NUM, pads); + ret = media_entity_pads_init(me, RESZ_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/media/platform/omap3isp/ispstat.c b/drivers/media/platform/omap3isp/ispstat.c index f7a5eee9f11d..1b9217d3b1b6 100644 --- a/drivers/media/platform/omap3isp/ispstat.c +++ b/drivers/media/platform/omap3isp/ispstat.c @@ -1028,7 +1028,7 @@ static int isp_stat_init_entities(struct ispstat *stat, const char *name, stat->pad.flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT; me->ops = NULL; - return media_entity_init(me, 1, &stat->pad); + return media_entity_pads_init(me, 1, &stat->pad); } int omap3isp_stat_init(struct ispstat *stat, const char *name, diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index 768efd775abc..1240b06202f0 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -1368,7 +1368,7 @@ int omap3isp_video_init(struct isp_video *video, const char *name) if (IS_ERR(video->alloc_ctx)) return PTR_ERR(video->alloc_ctx); - ret = media_entity_init(&video->video.entity, 1, &video->pad); + ret = media_entity_pads_init(&video->video.entity, 1, &video->pad); if (ret < 0) { vb2_dma_contig_cleanup_ctx(video->alloc_ctx); return ret; diff --git a/drivers/media/platform/s3c-camif/camif-capture.c b/drivers/media/platform/s3c-camif/camif-capture.c index 05bfa9d08b19..bd060ef5d1e1 100644 --- a/drivers/media/platform/s3c-camif/camif-capture.c +++ b/drivers/media/platform/s3c-camif/camif-capture.c @@ -1144,7 +1144,7 @@ int s3c_camif_register_video_node(struct camif_dev *camif, int idx) goto err_vd_rel; vp->pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&vfd->entity, 1, &vp->pad); + ret = media_entity_pads_init(&vfd->entity, 1, &vp->pad); if (ret) goto err_vd_rel; @@ -1559,7 +1559,7 @@ int s3c_camif_create_subdev(struct camif_dev *camif) camif->pads[CAMIF_SD_PAD_SOURCE_C].flags = MEDIA_PAD_FL_SOURCE; camif->pads[CAMIF_SD_PAD_SOURCE_P].flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&sd->entity, CAMIF_SD_PADS_NUM, + ret = media_entity_pads_init(&sd->entity, CAMIF_SD_PADS_NUM, camif->pads); if (ret) return ret; diff --git a/drivers/media/platform/vsp1/vsp1_entity.c b/drivers/media/platform/vsp1/vsp1_entity.c index 619942ff2058..d7308530952f 100644 --- a/drivers/media/platform/vsp1/vsp1_entity.c +++ b/drivers/media/platform/vsp1/vsp1_entity.c @@ -219,7 +219,7 @@ int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity, entity->pads[num_pads - 1].flags = MEDIA_PAD_FL_SOURCE; /* Initialize the media entity. */ - return media_entity_init(&entity->subdev.entity, num_pads, + return media_entity_pads_init(&entity->subdev.entity, num_pads, entity->pads); } diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c index 024d10de3740..e3304303dce3 100644 --- a/drivers/media/platform/vsp1/vsp1_video.c +++ b/drivers/media/platform/vsp1/vsp1_video.c @@ -1192,7 +1192,7 @@ int vsp1_video_init(struct vsp1_video *video, struct vsp1_entity *rwpf) video->pipe.state = VSP1_PIPELINE_STOPPED; /* Initialize the media entity... */ - ret = media_entity_init(&video->video.entity, 1, &video->pad); + ret = media_entity_pads_init(&video->video.entity, 1, &video->pad); if (ret < 0) return ret; diff --git a/drivers/media/platform/xilinx/xilinx-dma.c b/drivers/media/platform/xilinx/xilinx-dma.c index b69c9630114d..0181ff402a5a 100644 --- a/drivers/media/platform/xilinx/xilinx-dma.c +++ b/drivers/media/platform/xilinx/xilinx-dma.c @@ -675,7 +675,7 @@ int xvip_dma_init(struct xvip_composite_device *xdev, struct xvip_dma *dma, dma->pad.flags = type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&dma->video.entity, 1, &dma->pad); + ret = media_entity_pads_init(&dma->video.entity, 1, &dma->pad); if (ret < 0) goto error; diff --git a/drivers/media/platform/xilinx/xilinx-tpg.c b/drivers/media/platform/xilinx/xilinx-tpg.c index c09ca513a9dc..2ec1f6c4b274 100644 --- a/drivers/media/platform/xilinx/xilinx-tpg.c +++ b/drivers/media/platform/xilinx/xilinx-tpg.c @@ -838,7 +838,7 @@ static int xtpg_probe(struct platform_device *pdev) subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; subdev->entity.ops = &xtpg_media_ops; - ret = media_entity_init(&subdev->entity, xtpg->npads, xtpg->pads); + ret = media_entity_pads_init(&subdev->entity, xtpg->npads, xtpg->pads); if (ret < 0) goto error; diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c index 839361c035ff..8c54fd21022e 100644 --- a/drivers/media/usb/au0828/au0828-video.c +++ b/drivers/media/usb/au0828/au0828-video.c @@ -1810,12 +1810,12 @@ static void au0828_analog_create_entities(struct au0828_dev *dev) /* Initialize Video and VBI pads */ dev->video_pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&dev->vdev.entity, 1, &dev->video_pad); + ret = media_entity_pads_init(&dev->vdev.entity, 1, &dev->video_pad); if (ret < 0) pr_err("failed to initialize video media entity!\n"); dev->vbi_pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&dev->vbi_dev.entity, 1, &dev->vbi_pad); + ret = media_entity_pads_init(&dev->vbi_dev.entity, 1, &dev->vbi_pad); if (ret < 0) pr_err("failed to initialize vbi media entity!\n"); @@ -1847,7 +1847,7 @@ static void au0828_analog_create_entities(struct au0828_dev *dev) break; } - ret = media_entity_init(ent, 1, &dev->input_pad[i]); + ret = media_entity_pads_init(ent, 1, &dev->input_pad[i]); if (ret < 0) pr_err("failed to initialize input pad[%d]!\n", i); diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c index 905ccd7cbc6d..9b88cd8127ac 100644 --- a/drivers/media/usb/cx231xx/cx231xx-video.c +++ b/drivers/media/usb/cx231xx/cx231xx-video.c @@ -2175,7 +2175,7 @@ int cx231xx_register_analog_devices(struct cx231xx *dev) cx231xx_vdev_init(dev, &dev->vdev, &cx231xx_video_template, "video"); #if defined(CONFIG_MEDIA_CONTROLLER) dev->video_pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&dev->vdev.entity, 1, &dev->video_pad); + ret = media_entity_pads_init(&dev->vdev.entity, 1, &dev->video_pad); if (ret < 0) dev_err(dev->dev, "failed to initialize video media entity!\n"); #endif @@ -2202,7 +2202,7 @@ int cx231xx_register_analog_devices(struct cx231xx *dev) #if defined(CONFIG_MEDIA_CONTROLLER) dev->vbi_pad.flags = MEDIA_PAD_FL_SINK; - ret = media_entity_init(&dev->vbi_dev.entity, 1, &dev->vbi_pad); + ret = media_entity_pads_init(&dev->vbi_dev.entity, 1, &dev->vbi_pad); if (ret < 0) dev_err(dev->dev, "failed to initialize vbi media entity!\n"); #endif diff --git a/drivers/media/usb/uvc/uvc_entity.c b/drivers/media/usb/uvc/uvc_entity.c index 7f82b65b238e..38e893a1408b 100644 --- a/drivers/media/usb/uvc/uvc_entity.c +++ b/drivers/media/usb/uvc/uvc_entity.c @@ -94,10 +94,10 @@ static int uvc_mc_init_entity(struct uvc_entity *entity) strlcpy(entity->subdev.name, entity->name, sizeof(entity->subdev.name)); - ret = media_entity_init(&entity->subdev.entity, + ret = media_entity_pads_init(&entity->subdev.entity, entity->num_pads, entity->pads); } else if (entity->vdev != NULL) { - ret = media_entity_init(&entity->vdev->entity, + ret = media_entity_pads_init(&entity->vdev->entity, entity->num_pads, entity->pads); if (entity->flags & UVC_ENTITY_FLAG_DEFAULT) entity->vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT; diff --git a/drivers/media/v4l2-core/tuner-core.c b/drivers/media/v4l2-core/tuner-core.c index 05fc4df61b85..76496fd282aa 100644 --- a/drivers/media/v4l2-core/tuner-core.c +++ b/drivers/media/v4l2-core/tuner-core.c @@ -701,7 +701,7 @@ register_client: t->sd.entity.function = MEDIA_ENT_F_TUNER; t->sd.entity.name = t->name; - ret = media_entity_init(&t->sd.entity, TUNER_NUM_PADS, &t->pad[0]); + ret = media_entity_pads_init(&t->sd.entity, TUNER_NUM_PADS, &t->pad[0]); if (ret < 0) { tuner_err("failed to initialize media entity!\n"); kfree(t); diff --git a/drivers/media/v4l2-core/v4l2-flash-led-class.c b/drivers/media/v4l2-core/v4l2-flash-led-class.c index 5c686a24712b..13d5a36bc5d8 100644 --- a/drivers/media/v4l2-core/v4l2-flash-led-class.c +++ b/drivers/media/v4l2-core/v4l2-flash-led-class.c @@ -651,7 +651,7 @@ struct v4l2_flash *v4l2_flash_init( sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; strlcpy(sd->name, config->dev_name, sizeof(sd->name)); - ret = media_entity_init(&sd->entity, 0, NULL); + ret = media_entity_pads_init(&sd->entity, 0, NULL); if (ret < 0) return ERR_PTR(ret); diff --git a/drivers/staging/media/davinci_vpfe/dm365_ipipe.c b/drivers/staging/media/davinci_vpfe/dm365_ipipe.c index 77837afab0ce..ac78ed2f8bcc 100644 --- a/drivers/staging/media/davinci_vpfe/dm365_ipipe.c +++ b/drivers/staging/media/davinci_vpfe/dm365_ipipe.c @@ -1843,7 +1843,7 @@ vpfe_ipipe_init(struct vpfe_ipipe_device *ipipe, struct platform_device *pdev) v4l2_ctrl_handler_setup(&ipipe->ctrls); sd->ctrl_handler = &ipipe->ctrls; - return media_entity_init(me, IPIPE_PADS_NUM, pads); + return media_entity_pads_init(me, IPIPE_PADS_NUM, pads); } /* diff --git a/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c b/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c index b66584ecb693..a54c60fce3d5 100644 --- a/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c +++ b/drivers/staging/media/davinci_vpfe/dm365_ipipeif.c @@ -1031,7 +1031,7 @@ int vpfe_ipipeif_init(struct vpfe_ipipeif_device *ipipeif, ipipeif->output = IPIPEIF_OUTPUT_NONE; me->ops = &ipipeif_media_ops; - ret = media_entity_init(me, IPIPEIF_NUM_PADS, pads); + ret = media_entity_pads_init(me, IPIPEIF_NUM_PADS, pads); if (ret) goto fail; diff --git a/drivers/staging/media/davinci_vpfe/dm365_isif.c b/drivers/staging/media/davinci_vpfe/dm365_isif.c index 8ca0c1297ec8..b35667afb73f 100644 --- a/drivers/staging/media/davinci_vpfe/dm365_isif.c +++ b/drivers/staging/media/davinci_vpfe/dm365_isif.c @@ -2057,7 +2057,7 @@ int vpfe_isif_init(struct vpfe_isif_device *isif, struct platform_device *pdev) isif->input = ISIF_INPUT_NONE; isif->output = ISIF_OUTPUT_NONE; me->ops = &isif_media_ops; - status = media_entity_init(me, ISIF_PADS_NUM, pads); + status = media_entity_pads_init(me, ISIF_PADS_NUM, pads); if (status) goto isif_fail; isif->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; diff --git a/drivers/staging/media/davinci_vpfe/dm365_resizer.c b/drivers/staging/media/davinci_vpfe/dm365_resizer.c index ba887efd226a..669ae3f9791f 100644 --- a/drivers/staging/media/davinci_vpfe/dm365_resizer.c +++ b/drivers/staging/media/davinci_vpfe/dm365_resizer.c @@ -1915,7 +1915,7 @@ int vpfe_resizer_init(struct vpfe_resizer_device *vpfe_rsz, vpfe_rsz->crop_resizer.output2 = RESIZER_CROP_OUTPUT_NONE; vpfe_rsz->crop_resizer.rsz_device = vpfe_rsz; me->ops = &resizer_media_ops; - ret = media_entity_init(me, RESIZER_CROP_PADS_NUM, pads); + ret = media_entity_pads_init(me, RESIZER_CROP_PADS_NUM, pads); if (ret) return ret; @@ -1937,7 +1937,7 @@ int vpfe_resizer_init(struct vpfe_resizer_device *vpfe_rsz, vpfe_rsz->resizer_a.output = RESIZER_OUTPUT_NONE; vpfe_rsz->resizer_a.rsz_device = vpfe_rsz; me->ops = &resizer_media_ops; - ret = media_entity_init(me, RESIZER_PADS_NUM, pads); + ret = media_entity_pads_init(me, RESIZER_PADS_NUM, pads); if (ret) return ret; @@ -1959,7 +1959,7 @@ int vpfe_resizer_init(struct vpfe_resizer_device *vpfe_rsz, vpfe_rsz->resizer_b.output = RESIZER_OUTPUT_NONE; vpfe_rsz->resizer_b.rsz_device = vpfe_rsz; me->ops = &resizer_media_ops; - ret = media_entity_init(me, RESIZER_PADS_NUM, pads); + ret = media_entity_pads_init(me, RESIZER_PADS_NUM, pads); if (ret) return ret; diff --git a/drivers/staging/media/davinci_vpfe/vpfe_video.c b/drivers/staging/media/davinci_vpfe/vpfe_video.c index a5e30413fc47..285dc1a69b2c 100644 --- a/drivers/staging/media/davinci_vpfe/vpfe_video.c +++ b/drivers/staging/media/davinci_vpfe/vpfe_video.c @@ -1599,7 +1599,7 @@ int vpfe_video_init(struct vpfe_video_device *video, const char *name) spin_lock_init(&video->irqlock); spin_lock_init(&video->dma_queue_lock); mutex_init(&video->lock); - ret = media_entity_init(&video->video_dev.entity, + ret = media_entity_pads_init(&video->video_dev.entity, 1, &video->pad); if (ret < 0) return ret; diff --git a/drivers/staging/media/omap4iss/iss_csi2.c b/drivers/staging/media/omap4iss/iss_csi2.c index 2b9a36cd8fa8..226366a03661 100644 --- a/drivers/staging/media/omap4iss/iss_csi2.c +++ b/drivers/staging/media/omap4iss/iss_csi2.c @@ -1276,7 +1276,7 @@ static int csi2_init_entities(struct iss_csi2_device *csi2, const char *subname) pads[CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; me->ops = &csi2_media_ops; - ret = media_entity_init(me, CSI2_PADS_NUM, pads); + ret = media_entity_pads_init(me, CSI2_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/staging/media/omap4iss/iss_ipipe.c b/drivers/staging/media/omap4iss/iss_ipipe.c index dd9d7d54e6f8..d38782e8e84c 100644 --- a/drivers/staging/media/omap4iss/iss_ipipe.c +++ b/drivers/staging/media/omap4iss/iss_ipipe.c @@ -516,7 +516,7 @@ static int ipipe_init_entities(struct iss_ipipe_device *ipipe) pads[IPIPE_PAD_SOURCE_VP].flags = MEDIA_PAD_FL_SOURCE; me->ops = &ipipe_media_ops; - ret = media_entity_init(me, IPIPE_PADS_NUM, pads); + ret = media_entity_pads_init(me, IPIPE_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/staging/media/omap4iss/iss_ipipeif.c b/drivers/staging/media/omap4iss/iss_ipipeif.c index 8cbb9840a989..c2b5638a0898 100644 --- a/drivers/staging/media/omap4iss/iss_ipipeif.c +++ b/drivers/staging/media/omap4iss/iss_ipipeif.c @@ -748,7 +748,7 @@ static int ipipeif_init_entities(struct iss_ipipeif_device *ipipeif) pads[IPIPEIF_PAD_SOURCE_VP].flags = MEDIA_PAD_FL_SOURCE; me->ops = &ipipeif_media_ops; - ret = media_entity_init(me, IPIPEIF_PADS_NUM, pads); + ret = media_entity_pads_init(me, IPIPEIF_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/staging/media/omap4iss/iss_resizer.c b/drivers/staging/media/omap4iss/iss_resizer.c index a3925ecd0ed7..fea13ab4041f 100644 --- a/drivers/staging/media/omap4iss/iss_resizer.c +++ b/drivers/staging/media/omap4iss/iss_resizer.c @@ -790,7 +790,7 @@ static int resizer_init_entities(struct iss_resizer_device *resizer) pads[RESIZER_PAD_SOURCE_MEM].flags = MEDIA_PAD_FL_SOURCE; me->ops = &resizer_media_ops; - ret = media_entity_init(me, RESIZER_PADS_NUM, pads); + ret = media_entity_pads_init(me, RESIZER_PADS_NUM, pads); if (ret < 0) return ret; diff --git a/drivers/staging/media/omap4iss/iss_video.c b/drivers/staging/media/omap4iss/iss_video.c index 60b7a58e6122..8c6af412bc16 100644 --- a/drivers/staging/media/omap4iss/iss_video.c +++ b/drivers/staging/media/omap4iss/iss_video.c @@ -1101,7 +1101,7 @@ int omap4iss_video_init(struct iss_video *video, const char *name) return -EINVAL; } - ret = media_entity_init(&video->video.entity, 1, &video->pad); + ret = media_entity_pads_init(&video->video.entity, 1, &video->pad); if (ret < 0) return ret; diff --git a/include/media/media-entity.h b/include/media/media-entity.h index cd3f3a77df2d..32fef503d950 100644 --- a/include/media/media-entity.h +++ b/include/media/media-entity.h @@ -347,7 +347,7 @@ void media_gobj_init(struct media_device *mdev, struct media_gobj *gobj); void media_gobj_remove(struct media_gobj *gobj); -int media_entity_init(struct media_entity *entity, u16 num_pads, +int media_entity_pads_init(struct media_entity *entity, u16 num_pads, struct media_pad *pads); void media_entity_cleanup(struct media_entity *entity); -- cgit v1.2.3 From 8ed8c88c460fa6ce71deb9847f78a5bff4dfcb0e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 11 Dec 2015 08:02:19 -0200 Subject: [media] media-entity.h: get rid of revision and group_id fields Both revision and group_id fields were never used and were always initialized to zero. Remove them. Suggested-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml | 13 ++----------- Documentation/media-framework.txt | 12 +++++------- drivers/media/media-device.c | 4 ++-- include/media/media-entity.h | 4 ---- 4 files changed, 9 insertions(+), 24 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml index 27f8817e7abe..9f7614a01234 100644 --- a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml +++ b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml @@ -59,15 +59,6 @@ Entity IDs can be non-contiguous. Applications must not try to enumerate entities by calling MEDIA_IOC_ENUM_ENTITIES with increasing id's until they get an error. - Two or more entities that share a common non-zero - group_id value are considered as logically - grouped. Groups are used to report - - ALSA, VBI and video nodes that carry the same media - stream - lens and flash controllers associated with a sensor - - struct <structname>media_entity_desc</structname> @@ -106,7 +97,7 @@ revision - Entity revision in a driver/hardware specific format. + Entity revision. Always zero (obsolete) __u32 @@ -120,7 +111,7 @@ group_id - Entity group ID + Entity group ID. Always zero (obsolete) __u16 diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt index 7fbfe4bd1f47..ef3663af1db3 100644 --- a/Documentation/media-framework.txt +++ b/Documentation/media-framework.txt @@ -110,10 +110,10 @@ If no pads are needed, drivers could directly fill entity->num_pads with 0 and entity->pads with NULL or to call the above function that will do the same. -The media_entity name, type, flags, revision and group_id fields should be -initialized before calling media_device_register_entity(). Entities embedded -in higher-level standard structures can have some of those fields set by the -higher-level framework. +The media_entity name, type and flags fields should be initialized before +calling media_device_register_entity(). Entities embedded in higher-level +standard structures can have some of those fields set by the higher-level +framework. As the number of pads is known in advance, the pads array is not allocated dynamically but is managed by the entity driver. Most drivers will embed the @@ -164,9 +164,7 @@ Entities have flags that describe the entity capabilities and state. Logical entity groups can be defined by setting the group ID of all member entities to the same non-zero value. An entity group serves no purpose in the -kernel, but is reported to userspace during entities enumeration. The group_id -field belongs to the media device driver and must not by touched by entity -drivers. +kernel, but is reported to userspace during entities enumeration. Media device drivers should define groups if several entities are logically bound together. Example usages include reporting diff --git a/drivers/media/media-device.c b/drivers/media/media-device.c index b8cd7733a31c..537160bb461e 100644 --- a/drivers/media/media-device.c +++ b/drivers/media/media-device.c @@ -109,9 +109,9 @@ static long media_device_enum_entities(struct media_device *mdev, if (ent->name) strlcpy(u_ent.name, ent->name, sizeof(u_ent.name)); u_ent.type = ent->function; - u_ent.revision = ent->revision; + u_ent.revision = 0; /* Unused */ u_ent.flags = ent->flags; - u_ent.group_id = ent->group_id; + u_ent.group_id = 0; /* Unused */ u_ent.pads = ent->num_pads; u_ent.links = ent->num_links - ent->num_backlinks; memcpy(&u_ent.raw, &ent->info, sizeof(ent->info)); diff --git a/include/media/media-entity.h b/include/media/media-entity.h index 32fef503d950..031536723d8c 100644 --- a/include/media/media-entity.h +++ b/include/media/media-entity.h @@ -153,9 +153,7 @@ struct media_entity_operations { * @name: Entity name. * @function: Entity main function, as defined in uapi/media.h * (MEDIA_ENT_F_*) - * @revision: Entity revision - OBSOLETE - should be removed soon. * @flags: Entity flags, as defined in uapi/media.h (MEDIA_ENT_FL_*) - * @group_id: Entity group ID - OBSOLETE - should be removed soon. * @num_pads: Number of sink and source pads. * @num_links: Total number of links, forward and back, enabled and disabled. * @num_backlinks: Number of backlinks @@ -180,9 +178,7 @@ struct media_entity { struct media_gobj graph_obj; /* must be first field in struct */ const char *name; u32 function; - u32 revision; unsigned long flags; - u32 group_id; u16 num_pads; u16 num_links; -- cgit v1.2.3 From cc2dd94a051c8a467c66a258391cb980c3fb3312 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 11 Dec 2015 08:21:39 -0200 Subject: [media] DocBook: Move media-framework.txt contents to media-device.h Instead of using a text file, let's put it together with the struct documentation for the Media Controller. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/device-drivers.tmpl | 1 + Documentation/media-framework.txt | 373 ----------------------------- include/media/media-device.h | 378 ++++++++++++++++++++++++++++++ 3 files changed, 379 insertions(+), 373 deletions(-) delete mode 100644 Documentation/media-framework.txt (limited to 'Documentation') diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 7b3fcc5effcd..cdd8b24db68d 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -263,6 +263,7 @@ X!Isound/sound_firmware.c !Iinclude/media/lirc_dev.h Media Controller devices +!Pinclude/media/media-device.h Media Controller !Iinclude/media/media-device.h !Iinclude/media/media-devnode.h !Iinclude/media/media-entity.h diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt deleted file mode 100644 index ef3663af1db3..000000000000 --- a/Documentation/media-framework.txt +++ /dev/null @@ -1,373 +0,0 @@ -Linux kernel media framework -============================ - -This document describes the Linux kernel media framework, its data structures, -functions and their usage. - - -Introduction ------------- - -The media controller API is documented in DocBook format in -Documentation/DocBook/media/v4l/media-controller.xml. This document will focus -on the kernel-side implementation of the media framework. - - -Abstract media device model ---------------------------- - -Discovering a device internal topology, and configuring it at runtime, is one -of the goals of the media framework. To achieve this, hardware devices are -modelled as an oriented graph of building blocks called entities connected -through pads. - -An entity is a basic media hardware building block. It can correspond to -a large variety of logical blocks such as physical hardware devices -(CMOS sensor for instance), logical hardware devices (a building block -in a System-on-Chip image processing pipeline), DMA channels or physical -connectors. - -A pad is a connection endpoint through which an entity can interact with -other entities. Data (not restricted to video) produced by an entity -flows from the entity's output to one or more entity inputs. Pads should -not be confused with physical pins at chip boundaries. - -A link is a point-to-point oriented connection between two pads, either -on the same entity or on different entities. Data flows from a source -pad to a sink pad. - - -Media device ------------- - -A media device is represented by a struct media_device instance, defined in -include/media/media-device.h. Allocation of the structure is handled by the -media device driver, usually by embedding the media_device instance in a -larger driver-specific structure. - -Drivers register media device instances by calling - - media_device_register(struct media_device *mdev); - -The caller is responsible for initializing the media_device structure before -registration. The following fields must be set: - - - dev must point to the parent device (usually a pci_dev, usb_interface or - platform_device instance). - - - model must be filled with the device model name as a NUL-terminated UTF-8 - string. The device/model revision must not be stored in this field. - -The following fields are optional: - - - serial is a unique serial number stored as a NUL-terminated ASCII string. - The field is big enough to store a GUID in text form. If the hardware - doesn't provide a unique serial number this field must be left empty. - - - bus_info represents the location of the device in the system as a - NUL-terminated ASCII string. For PCI/PCIe devices bus_info must be set to - "PCI:" (or "PCIe:") followed by the value of pci_name(). For USB devices, - the usb_make_path() function must be used. This field is used by - applications to distinguish between otherwise identical devices that don't - provide a serial number. - - - hw_revision is the hardware device revision in a driver-specific format. - When possible the revision should be formatted with the KERNEL_VERSION - macro. - - - driver_version is formatted with the KERNEL_VERSION macro. The version - minor must be incremented when new features are added to the userspace API - without breaking binary compatibility. The version major must be - incremented when binary compatibility is broken. - -Upon successful registration a character device named media[0-9]+ is created. -The device major and minor numbers are dynamic. The model name is exported as -a sysfs attribute. - -Drivers unregister media device instances by calling - - media_device_unregister(struct media_device *mdev); - -Unregistering a media device that hasn't been registered is *NOT* safe. - - -Entities, pads and links ------------------------- - -- Entities - -Entities are represented by a struct media_entity instance, defined in -include/media/media-entity.h. The structure is usually embedded into a -higher-level structure, such as a v4l2_subdev or video_device instance, -although drivers can allocate entities directly. - -Drivers initialize entity pads by calling - - media_entity_pads_init(struct media_entity *entity, u16 num_pads, - struct media_pad *pads); - -If no pads are needed, drivers could directly fill entity->num_pads -with 0 and entity->pads with NULL or to call the above function that -will do the same. - -The media_entity name, type and flags fields should be initialized before -calling media_device_register_entity(). Entities embedded in higher-level -standard structures can have some of those fields set by the higher-level -framework. - -As the number of pads is known in advance, the pads array is not allocated -dynamically but is managed by the entity driver. Most drivers will embed the -pads array in a driver-specific structure, avoiding dynamic allocation. - -Drivers must set the direction of every pad in the pads array before calling -media_entity_pads_init. The function will initialize the other pads fields. - -Unlike the number of pads, the total number of links isn't always known in -advance by the entity driver. As an initial estimate, media_entity_pads_init -pre-allocates a number of links equal to the number of pads. The links array -will be reallocated if it grows beyond the initial estimate. - -Drivers register entities with a media device by calling - - media_device_register_entity(struct media_device *mdev, - struct media_entity *entity); - -Entities are identified by a unique positive integer ID. Drivers can provide an -ID by filling the media_entity id field prior to registration, or request the -media controller framework to assign an ID automatically. Drivers that provide -IDs manually must ensure that all IDs are unique. IDs are not guaranteed to be -contiguous even when they are all assigned automatically by the framework. - -Drivers unregister entities by calling - - media_device_unregister_entity(struct media_entity *entity); - -Unregistering an entity will not change the IDs of the other entities, and the -ID will never be reused for a newly registered entity. - -When a media device is unregistered, all its entities are unregistered -automatically. No manual entities unregistration is then required. - -Drivers free resources associated with an entity by calling - - media_entity_cleanup(struct media_entity *entity); - -This function must be called during the cleanup phase after unregistering the -entity. Note that the media_entity instance itself must be freed explicitly by -the driver if required. - -Entities have flags that describe the entity capabilities and state. - - MEDIA_ENT_FL_DEFAULT indicates the default entity for a given type. - This can be used to report the default audio and video devices or the - default camera sensor. - -Logical entity groups can be defined by setting the group ID of all member -entities to the same non-zero value. An entity group serves no purpose in the -kernel, but is reported to userspace during entities enumeration. - -Media device drivers should define groups if several entities are logically -bound together. Example usages include reporting - - - ALSA, VBI and video nodes that carry the same media stream - - lens and flash controllers associated with a sensor - -- Pads - -Pads are represented by a struct media_pad instance, defined in -include/media/media-entity.h. Each entity stores its pads in a pads array -managed by the entity driver. Drivers usually embed the array in a -driver-specific structure. - -Pads are identified by their entity and their 0-based index in the pads array. -Both information are stored in the media_pad structure, making the media_pad -pointer the canonical way to store and pass link references. - -Pads have flags that describe the pad capabilities and state. - - MEDIA_PAD_FL_SINK indicates that the pad supports sinking data. - MEDIA_PAD_FL_SOURCE indicates that the pad supports sourcing data. - -One and only one of MEDIA_PAD_FL_SINK and MEDIA_PAD_FL_SOURCE must be set for -each pad. - -- Links - -Links are represented by a struct media_link instance, defined in -include/media/media-entity.h. Each entity stores all links originating at or -targeting any of its pads in a links array. A given link is thus stored -twice, once in the source entity and once in the target entity. The array is -pre-allocated and grows dynamically as needed. - -Drivers create links by calling - - media_create_pad_link(struct media_entity *source, u16 source_pad, - struct media_entity *sink, u16 sink_pad, - u32 flags); - -An entry in the link array of each entity is allocated and stores pointers -to source and sink pads. - -Links have flags that describe the link capabilities and state. - - MEDIA_LNK_FL_ENABLED indicates that the link is enabled and can be used - to transfer media data. When two or more links target a sink pad, only - one of them can be enabled at a time. - MEDIA_LNK_FL_IMMUTABLE indicates that the link enabled state can't be - modified at runtime. If MEDIA_LNK_FL_IMMUTABLE is set, then - MEDIA_LNK_FL_ENABLED must also be set since an immutable link is always - enabled. - - -Graph traversal ---------------- - -The media framework provides APIs to iterate over entities in a graph. - -To iterate over all entities belonging to a media device, drivers can use the -media_device_for_each_entity macro, defined in include/media/media-device.h. - - struct media_entity *entity; - - media_device_for_each_entity(entity, mdev) { - /* entity will point to each entity in turn */ - ... - } - -Drivers might also need to iterate over all entities in a graph that can be -reached only through enabled links starting at a given entity. The media -framework provides a depth-first graph traversal API for that purpose. - -Note that graphs with cycles (whether directed or undirected) are *NOT* -supported by the graph traversal API. To prevent infinite loops, the graph -traversal code limits the maximum depth to MEDIA_ENTITY_ENUM_MAX_DEPTH, -currently defined as 16. - -Drivers initiate a graph traversal by calling - - media_entity_graph_walk_start(struct media_entity_graph *graph, - struct media_entity *entity); - -The graph structure, provided by the caller, is initialized to start graph -traversal at the given entity. - -Drivers can then retrieve the next entity by calling - - media_entity_graph_walk_next(struct media_entity_graph *graph); - -When the graph traversal is complete the function will return NULL. - -Graph traversal can be interrupted at any moment. No cleanup function call is -required and the graph structure can be freed normally. - -Helper functions can be used to find a link between two given pads, or a pad -connected to another pad through an enabled link - - media_entity_find_link(struct media_pad *source, - struct media_pad *sink); - - media_entity_remote_pad(struct media_pad *pad); - -Refer to the kerneldoc documentation for more information. - - -Use count and power handling ----------------------------- - -Due to the wide differences between drivers regarding power management needs, -the media controller does not implement power management. However, the -media_entity structure includes a use_count field that media drivers can use to -track the number of users of every entity for power management needs. - -The use_count field is owned by media drivers and must not be touched by entity -drivers. Access to the field must be protected by the media device graph_mutex -lock. - - -Links setup ------------ - -Link properties can be modified at runtime by calling - - media_entity_setup_link(struct media_link *link, u32 flags); - -The flags argument contains the requested new link flags. - -The only configurable property is the ENABLED link flag to enable/disable a -link. Links marked with the IMMUTABLE link flag can not be enabled or disabled. - -When a link is enabled or disabled, the media framework calls the -link_setup operation for the two entities at the source and sink of the link, -in that order. If the second link_setup call fails, another link_setup call is -made on the first entity to restore the original link flags. - -Media device drivers can be notified of link setup operations by setting the -media_device::link_notify pointer to a callback function. If provided, the -notification callback will be called before enabling and after disabling -links. - -Entity drivers must implement the link_setup operation if any of their links -is non-immutable. The operation must either configure the hardware or store -the configuration information to be applied later. - -Link configuration must not have any side effect on other links. If an enabled -link at a sink pad prevents another link at the same pad from being enabled, -the link_setup operation must return -EBUSY and can't implicitly disable the -first enabled link. - - -Pipelines and media streams ---------------------------- - -When starting streaming, drivers must notify all entities in the pipeline to -prevent link states from being modified during streaming by calling - - media_entity_pipeline_start(struct media_entity *entity, - struct media_pipeline *pipe); - -The function will mark all entities connected to the given entity through -enabled links, either directly or indirectly, as streaming. - -The media_pipeline instance pointed to by the pipe argument will be stored in -every entity in the pipeline. Drivers should embed the media_pipeline structure -in higher-level pipeline structures and can then access the pipeline through -the media_entity pipe field. - -Calls to media_entity_pipeline_start() can be nested. The pipeline pointer must -be identical for all nested calls to the function. - -media_entity_pipeline_start() may return an error. In that case, it will -clean up any of the changes it did by itself. - -When stopping the stream, drivers must notify the entities with - - media_entity_pipeline_stop(struct media_entity *entity); - -If multiple calls to media_entity_pipeline_start() have been made the same -number of media_entity_pipeline_stop() calls are required to stop streaming. The -media_entity pipe field is reset to NULL on the last nested stop call. - -Link configuration will fail with -EBUSY by default if either end of the link is -a streaming entity. Links that can be modified while streaming must be marked -with the MEDIA_LNK_FL_DYNAMIC flag. - -If other operations need to be disallowed on streaming entities (such as -changing entities configuration parameters) drivers can explicitly check the -media_entity stream_count field to find out if an entity is streaming. This -operation must be done with the media_device graph_mutex held. - - -Link validation ---------------- - -Link validation is performed by media_entity_pipeline_start() for any -entity which has sink pads in the pipeline. The -media_entity::link_validate() callback is used for that purpose. In -link_validate() callback, entity driver should check that the properties of -the source pad of the connected entity and its own sink pad match. It is up -to the type of the entity (and in the end, the properties of the hardware) -what matching actually means. - -Subsystems should facilitate link validation by providing subsystem specific -helper functions to provide easy access for commonly needed information, and -in the end provide a way to use driver-specific callbacks. diff --git a/include/media/media-device.h b/include/media/media-device.h index 87ff299e1265..6728528df9e2 100644 --- a/include/media/media-device.h +++ b/include/media/media-device.h @@ -30,6 +30,384 @@ #include #include +/** + * DOC: Media Controller + * + * Linux kernel media framework + * ============================ + * + * This document describes the Linux kernel media framework, its data structures, + * functions and their usage. + * + * + * Introduction + * ------------ + * + * The media controller API is documented in DocBook format in + * Documentation/DocBook/media/v4l/media-controller.xml. This document will focus + * on the kernel-side implementation of the media framework. + * + * + * Abstract media device model + * --------------------------- + * + * Discovering a device internal topology, and configuring it at runtime, is one + * of the goals of the media framework. To achieve this, hardware devices are + * modelled as an oriented graph of building blocks called entities connected + * through pads. + * + * An entity is a basic media hardware building block. It can correspond to + * a large variety of logical blocks such as physical hardware devices + * (CMOS sensor for instance), logical hardware devices (a building block + * in a System-on-Chip image processing pipeline), DMA channels or physical + * connectors. + * + * A pad is a connection endpoint through which an entity can interact with + * other entities. Data (not restricted to video) produced by an entity + * flows from the entity's output to one or more entity inputs. Pads should + * not be confused with physical pins at chip boundaries. + * + * A link is a point-to-point oriented connection between two pads, either + * on the same entity or on different entities. Data flows from a source + * pad to a sink pad. + * + * + * Media device + * ------------ + * + * A media device is represented by a struct media_device instance, defined in + * include/media/media-device.h. Allocation of the structure is handled by the + * media device driver, usually by embedding the media_device instance in a + * larger driver-specific structure. + * + * Drivers register media device instances by calling + * + * media_device_register(struct media_device *mdev); + * + * The caller is responsible for initializing the media_device structure before + * registration. The following fields must be set: + * + * - dev must point to the parent device (usually a pci_dev, usb_interface or + * platform_device instance). + * + * - model must be filled with the device model name as a NUL-terminated UTF-8 + * string. The device/model revision must not be stored in this field. + * + * The following fields are optional: + * + * - serial is a unique serial number stored as a NUL-terminated ASCII string. + * The field is big enough to store a GUID in text form. If the hardware + * doesn't provide a unique serial number this field must be left empty. + * + * - bus_info represents the location of the device in the system as a + * NUL-terminated ASCII string. For PCI/PCIe devices bus_info must be set to + * "PCI:" (or "PCIe:") followed by the value of pci_name(). For USB devices, + * the usb_make_path() function must be used. This field is used by + * applications to distinguish between otherwise identical devices that don't + * provide a serial number. + * + * - hw_revision is the hardware device revision in a driver-specific format. + * When possible the revision should be formatted with the KERNEL_VERSION + * macro. + * + * - driver_version is formatted with the KERNEL_VERSION macro. The version + * minor must be incremented when new features are added to the userspace API + * without breaking binary compatibility. The version major must be + * incremented when binary compatibility is broken. + * + * Upon successful registration a character device named media[0-9]+ is created. + * The device major and minor numbers are dynamic. The model name is exported as + * a sysfs attribute. + * + * Drivers unregister media device instances by calling + * + * media_device_unregister(struct media_device *mdev); + * + * Unregistering a media device that hasn't been registered is *NOT* safe. + * + * + * Entities, pads and links + * ------------------------ + * + * - Entities + * + * Entities are represented by a struct media_entity instance, defined in + * include/media/media-entity.h. The structure is usually embedded into a + * higher-level structure, such as a v4l2_subdev or video_device instance, + * although drivers can allocate entities directly. + * + * Drivers initialize entity pads by calling + * + * media_entity_pads_init(struct media_entity *entity, u16 num_pads, + * struct media_pad *pads); + * + * If no pads are needed, drivers could directly fill entity->num_pads + * with 0 and entity->pads with NULL or to call the above function that + * will do the same. + * + * The media_entity name, type and flags fields should be initialized before + * calling media_device_register_entity(). Entities embedded in higher-level + * standard structures can have some of those fields set by the higher-level + * framework. + * + * As the number of pads is known in advance, the pads array is not allocated + * dynamically but is managed by the entity driver. Most drivers will embed the + * pads array in a driver-specific structure, avoiding dynamic allocation. + * + * Drivers must set the direction of every pad in the pads array before calling + * media_entity_pads_init. The function will initialize the other pads fields. + * + * Unlike the number of pads, the total number of links isn't always known in + * advance by the entity driver. As an initial estimate, media_entity_pads_init + * pre-allocates a number of links equal to the number of pads. The links array + * will be reallocated if it grows beyond the initial estimate. + * + * Drivers register entities with a media device by calling + * + * media_device_register_entity(struct media_device *mdev, + * struct media_entity *entity); + * + * Entities are identified by a unique positive integer ID. Drivers can provide an + * ID by filling the media_entity id field prior to registration, or request the + * media controller framework to assign an ID automatically. Drivers that provide + * IDs manually must ensure that all IDs are unique. IDs are not guaranteed to be + * contiguous even when they are all assigned automatically by the framework. + * + * Drivers unregister entities by calling + * + * media_device_unregister_entity(struct media_entity *entity); + * + * Unregistering an entity will not change the IDs of the other entities, and the + * ID will never be reused for a newly registered entity. + * + * When a media device is unregistered, all its entities are unregistered + * automatically. No manual entities unregistration is then required. + * + * Drivers free resources associated with an entity by calling + * + * media_entity_cleanup(struct media_entity *entity); + * + * This function must be called during the cleanup phase after unregistering the + * entity. Note that the media_entity instance itself must be freed explicitly by + * the driver if required. + * + * Entities have flags that describe the entity capabilities and state. + * + * MEDIA_ENT_FL_DEFAULT indicates the default entity for a given type. + * This can be used to report the default audio and video devices or the + * default camera sensor. + * + * Logical entity groups can be defined by setting the group ID of all member + * entities to the same non-zero value. An entity group serves no purpose in the + * kernel, but is reported to userspace during entities enumeration. + * + * Media device drivers should define groups if several entities are logically + * bound together. Example usages include reporting + * + * - ALSA, VBI and video nodes that carry the same media stream + * - lens and flash controllers associated with a sensor + * + * - Pads + * + * Pads are represented by a struct media_pad instance, defined in + * include/media/media-entity.h. Each entity stores its pads in a pads array + * managed by the entity driver. Drivers usually embed the array in a + * driver-specific structure. + * + * Pads are identified by their entity and their 0-based index in the pads array. + * Both information are stored in the media_pad structure, making the media_pad + * pointer the canonical way to store and pass link references. + * + * Pads have flags that describe the pad capabilities and state. + * + * MEDIA_PAD_FL_SINK indicates that the pad supports sinking data. + * MEDIA_PAD_FL_SOURCE indicates that the pad supports sourcing data. + * + * One and only one of MEDIA_PAD_FL_SINK and MEDIA_PAD_FL_SOURCE must be set for + * each pad. + * + * - Links + * + * Links are represented by a struct media_link instance, defined in + * include/media/media-entity.h. Each entity stores all links originating at or + * targeting any of its pads in a links array. A given link is thus stored + * twice, once in the source entity and once in the target entity. The array is + * pre-allocated and grows dynamically as needed. + * + * Drivers create links by calling + * + * media_create_pad_link(struct media_entity *source, u16 source_pad, + * struct media_entity *sink, u16 sink_pad, + * u32 flags); + * + * An entry in the link array of each entity is allocated and stores pointers + * to source and sink pads. + * + * Links have flags that describe the link capabilities and state. + * + * MEDIA_LNK_FL_ENABLED indicates that the link is enabled and can be used + * to transfer media data. When two or more links target a sink pad, only + * one of them can be enabled at a time. + * MEDIA_LNK_FL_IMMUTABLE indicates that the link enabled state can't be + * modified at runtime. If MEDIA_LNK_FL_IMMUTABLE is set, then + * MEDIA_LNK_FL_ENABLED must also be set since an immutable link is always + * enabled. + * + * + * Graph traversal + * --------------- + * + * The media framework provides APIs to iterate over entities in a graph. + * + * To iterate over all entities belonging to a media device, drivers can use the + * media_device_for_each_entity macro, defined in include/media/media-device.h. + * + * struct media_entity *entity; + * + * media_device_for_each_entity(entity, mdev) { + * // entity will point to each entity in turn + * ... + * } + * + * Drivers might also need to iterate over all entities in a graph that can be + * reached only through enabled links starting at a given entity. The media + * framework provides a depth-first graph traversal API for that purpose. + * + * Note that graphs with cycles (whether directed or undirected) are *NOT* + * supported by the graph traversal API. To prevent infinite loops, the graph + * traversal code limits the maximum depth to MEDIA_ENTITY_ENUM_MAX_DEPTH, + * currently defined as 16. + * + * Drivers initiate a graph traversal by calling + * + * media_entity_graph_walk_start(struct media_entity_graph *graph, + * struct media_entity *entity); + * + * The graph structure, provided by the caller, is initialized to start graph + * traversal at the given entity. + * + * Drivers can then retrieve the next entity by calling + * + * media_entity_graph_walk_next(struct media_entity_graph *graph); + * + * When the graph traversal is complete the function will return NULL. + * + * Graph traversal can be interrupted at any moment. No cleanup function call is + * required and the graph structure can be freed normally. + * + * Helper functions can be used to find a link between two given pads, or a pad + * connected to another pad through an enabled link + * + * media_entity_find_link(struct media_pad *source, + * struct media_pad *sink); + * + * media_entity_remote_pad(struct media_pad *pad); + * + * Refer to the kerneldoc documentation for more information. + * + * + * Use count and power handling + * ---------------------------- + * + * Due to the wide differences between drivers regarding power management needs, + * the media controller does not implement power management. However, the + * media_entity structure includes a use_count field that media drivers can use to + * track the number of users of every entity for power management needs. + * + * The use_count field is owned by media drivers and must not be touched by entity + * drivers. Access to the field must be protected by the media device graph_mutex + * lock. + * + * + * Links setup + * ----------- + * + * Link properties can be modified at runtime by calling + * + * media_entity_setup_link(struct media_link *link, u32 flags); + * + * The flags argument contains the requested new link flags. + * + * The only configurable property is the ENABLED link flag to enable/disable a + * link. Links marked with the IMMUTABLE link flag can not be enabled or disabled. + * + * When a link is enabled or disabled, the media framework calls the + * link_setup operation for the two entities at the source and sink of the link, + * in that order. If the second link_setup call fails, another link_setup call is + * made on the first entity to restore the original link flags. + * + * Media device drivers can be notified of link setup operations by setting the + * media_device::link_notify pointer to a callback function. If provided, the + * notification callback will be called before enabling and after disabling + * links. + * + * Entity drivers must implement the link_setup operation if any of their links + * is non-immutable. The operation must either configure the hardware or store + * the configuration information to be applied later. + * + * Link configuration must not have any side effect on other links. If an enabled + * link at a sink pad prevents another link at the same pad from being enabled, + * the link_setup operation must return -EBUSY and can't implicitly disable the + * first enabled link. + * + * + * Pipelines and media streams + * --------------------------- + * + * When starting streaming, drivers must notify all entities in the pipeline to + * prevent link states from being modified during streaming by calling + * + * media_entity_pipeline_start(struct media_entity *entity, + * struct media_pipeline *pipe); + * + * The function will mark all entities connected to the given entity through + * enabled links, either directly or indirectly, as streaming. + * + * The media_pipeline instance pointed to by the pipe argument will be stored in + * every entity in the pipeline. Drivers should embed the media_pipeline structure + * in higher-level pipeline structures and can then access the pipeline through + * the media_entity pipe field. + * + * Calls to media_entity_pipeline_start() can be nested. The pipeline pointer must + * be identical for all nested calls to the function. + * + * media_entity_pipeline_start() may return an error. In that case, it will + * clean up any of the changes it did by itself. + * + * When stopping the stream, drivers must notify the entities with + * + * media_entity_pipeline_stop(struct media_entity *entity); + * + * If multiple calls to media_entity_pipeline_start() have been made the same + * number of media_entity_pipeline_stop() calls are required to stop streaming. The + * media_entity pipe field is reset to NULL on the last nested stop call. + * + * Link configuration will fail with -EBUSY by default if either end of the link is + * a streaming entity. Links that can be modified while streaming must be marked + * with the MEDIA_LNK_FL_DYNAMIC flag. + * + * If other operations need to be disallowed on streaming entities (such as + * changing entities configuration parameters) drivers can explicitly check the + * media_entity stream_count field to find out if an entity is streaming. This + * operation must be done with the media_device graph_mutex held. + * + * + * Link validation + * --------------- + * + * Link validation is performed by media_entity_pipeline_start() for any + * entity which has sink pads in the pipeline. The + * media_entity::link_validate() callback is used for that purpose. In + * link_validate() callback, entity driver should check that the properties of + * the source pad of the connected entity and its own sink pad match. It is up + * to the type of the entity (and in the end, the properties of the hardware) + * what matching actually means. + * + * Subsystems should facilitate link validation by providing subsystem specific + * helper functions to provide easy access for commonly needed information, and + * in the end provide a way to use driver-specific callbacks. + */ + struct device; /** -- cgit v1.2.3 From b7870d692d7b0718f7153aed9e7a32f0119b525d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Dec 2015 08:59:14 -0200 Subject: [media] DocBook: MC: add the concept of interfaces The Media Controller next generation patches added a new graph element type: interfaces. It also allows links between interfaces and entities. Update the docbook to reflect that. Signed-off-by: Mauro Carvalho Chehab --- .../DocBook/media/v4l/media-controller.xml | 40 ++++++++++++++-------- 1 file changed, 26 insertions(+), 14 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/media/v4l/media-controller.xml b/Documentation/DocBook/media/v4l/media-controller.xml index 873ac3a621f0..def4a27aadef 100644 --- a/Documentation/DocBook/media/v4l/media-controller.xml +++ b/Documentation/DocBook/media/v4l/media-controller.xml @@ -58,20 +58,32 @@ Media device model Discovering a device internal topology, and configuring it at runtime, is one of the goals of the media controller API. To achieve this, hardware - devices are modelled as an oriented graph of building blocks called entities - connected through pads. - An entity is a basic media hardware or software building block. It can - correspond to a large variety of logical blocks such as physical hardware - devices (CMOS sensor for instance), logical hardware devices (a building - block in a System-on-Chip image processing pipeline), DMA channels or - physical connectors. - A pad is a connection endpoint through which an entity can interact - with other entities. Data (not restricted to video) produced by an entity - flows from the entity's output to one or more entity inputs. Pads should not - be confused with physical pins at chip boundaries. - A link is a point-to-point oriented connection between two pads, - either on the same entity or on different entities. Data flows from a source - pad to a sink pad. + devices and Linux Kernel interfaces are modelled as graph objects on + an oriented graph. The object types that constitute the graph are: + + An entity + is a basic media hardware or software building block. It can correspond to + a large variety of logical blocks such as physical hardware devices + (CMOS sensor for instance), logical hardware devices (a building block in + a System-on-Chip image processing pipeline), DMA channels or physical + connectors. + An interface + is a graph representation of a Linux Kernel userspace API interface, + like a device node or a sysfs file that controls one or more entities + in the graph. + A pad + is a data connection endpoint through which an entity can interact with + other entities. Data (not restricted to video) produced by an entity + flows from the entity's output to one or more entity inputs. Pads should + not be confused with physical pins at chip boundaries. + A data link + is a point-to-point oriented connection between two pads, either on the + same entity or on different entities. Data flows from a source pad to a + sink pad. + An interface link + is a point-to-point bidirectional control connection between a Linux + Kernel interface and an entity.m + -- cgit v1.2.3 From 5fec921f49891e1343d60df3f6f40ceb52acdd42 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Dec 2015 09:56:07 -0200 Subject: [media] DocBook: move data types to a separate section As MEDIA_IOC_G_TOPOLOGY shares the data types already declared for entities, pads and links, we should move those to a separate part of the document, and use cross-references where needed. So, move the following tables to a separate section at the DocBook: media-entity-type media-entity-flag media-pad-flag media-link-flag Signed-off-by: Mauro Carvalho Chehab --- .../DocBook/media/v4l/media-controller.xml | 3 + .../DocBook/media/v4l/media-ioc-enum-entities.xml | 104 ------------- .../DocBook/media/v4l/media-ioc-enum-links.xml | 56 ------- Documentation/DocBook/media/v4l/media-types.xml | 166 +++++++++++++++++++++ 4 files changed, 169 insertions(+), 160 deletions(-) create mode 100644 Documentation/DocBook/media/v4l/media-types.xml (limited to 'Documentation') diff --git a/Documentation/DocBook/media/v4l/media-controller.xml b/Documentation/DocBook/media/v4l/media-controller.xml index def4a27aadef..63d48decaa6f 100644 --- a/Documentation/DocBook/media/v4l/media-controller.xml +++ b/Documentation/DocBook/media/v4l/media-controller.xml @@ -85,6 +85,9 @@ Kernel interface and an entity.m + + + &sub-media-types; diff --git a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml index 9f7614a01234..0c4f96bfc2de 100644 --- a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml +++ b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml @@ -162,110 +162,6 @@
- - - Media entity types - - - - - - MEDIA_ENT_F_UNKNOWN and MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN - Unknown entity. That generally indicates that - a driver didn't initialize properly the entity, with is a Kernel bug - - - MEDIA_ENT_F_IO_V4L - Data streaming input and/or output entity. - - - MEDIA_ENT_F_IO_VBI - V4L VBI streaming input or output entity - - - MEDIA_ENT_F_IO_SWRADIO - V4L Software Digital Radio (SDR) streaming input or output entity - - - MEDIA_ENT_F_IO_DTV - DVB Digital TV streaming input or output entity - - - MEDIA_ENT_F_DTV_DEMOD - Digital TV demodulator entity. - - - MEDIA_ENT_F_MPEG_TS_DEMUX - MPEG Transport stream demux entity. Could be implemented on hardware or in Kernelspace by the Linux DVB subsystem. - - - MEDIA_ENT_F_DTV_CA - Digital TV Conditional Access module (CAM) entity - - - MEDIA_ENT_F_DTV_NET_DECAP - Digital TV network ULE/MLE desencapsulation entity. Could be implemented on hardware or in Kernelspace - - - MEDIA_ENT_F_CONN_RF - Connector for a Radio Frequency (RF) signal. - - - MEDIA_ENT_F_CONN_SVIDEO - Connector for a S-Video signal. - - - MEDIA_ENT_F_CONN_COMPOSITE - Connector for a RGB composite signal. - - - MEDIA_ENT_F_CONN_TEST - Connector for a test generator. - - - MEDIA_ENT_F_CAM_SENSOR - Camera video sensor entity. - - - MEDIA_ENT_F_FLASH - Flash controller entity. - - - MEDIA_ENT_F_LENS - Lens controller entity. - - - MEDIA_ENT_F_ATV_DECODER - Analog video decoder, the basic function of the video decoder - is to accept analogue video from a wide variety of sources such as - broadcast, DVD players, cameras and video cassette recorders, in - either NTSC, PAL, SECAM or HD format, separating the stream - into its component parts, luminance and chrominance, and output - it in some digital video standard, with appropriate timing - signals. - - - MEDIA_ENT_F_TUNER - Digital TV, analog TV, radio and/or software radio tuner. - - - -
- - - Media entity flags - - - - - - MEDIA_ENT_FL_DEFAULT - Default entity for its type. Used to discover the default - audio, VBI and video devices, the default camera sensor, ... - - - -
diff --git a/Documentation/DocBook/media/v4l/media-ioc-enum-links.xml b/Documentation/DocBook/media/v4l/media-ioc-enum-links.xml index 74fb394ec667..2bbeea9f3e18 100644 --- a/Documentation/DocBook/media/v4l/media-ioc-enum-links.xml +++ b/Documentation/DocBook/media/v4l/media-ioc-enum-links.xml @@ -118,35 +118,6 @@ - - Media pad flags - - - - - - MEDIA_PAD_FL_SINK - Input pad, relative to the entity. Input pads sink data and - are targets of links. - - - MEDIA_PAD_FL_SOURCE - Output pad, relative to the entity. Output pads source data - and are origins of links. - - - MEDIA_PAD_FL_MUST_CONNECT - If this flag is set and the pad is linked to any other - pad, then at least one of those links must be enabled for the - entity to be able to stream. There could be temporary reasons - (e.g. device configuration dependent) for the pad to need - enabled links even when this flag isn't set; the absence of the - flag doesn't imply there is none. - - - -
- struct <structname>media_link_desc</structname> @@ -171,33 +142,6 @@ - - Media link flags - - - - - - MEDIA_LNK_FL_ENABLED - The link is enabled and can be used to transfer media data. - When two or more links target a sink pad, only one of them can be - enabled at a time. - - - MEDIA_LNK_FL_IMMUTABLE - The link enabled state can't be modified at runtime. An - immutable link is always enabled. - - - MEDIA_LNK_FL_DYNAMIC - The link enabled state can be modified during streaming. This - flag is set by drivers and is read-only for applications. - - - - - One and only one of MEDIA_PAD_FL_SINK and - MEDIA_PAD_FL_SOURCE must be set for every pad. diff --git a/Documentation/DocBook/media/v4l/media-types.xml b/Documentation/DocBook/media/v4l/media-types.xml new file mode 100644 index 000000000000..0c5c9c034586 --- /dev/null +++ b/Documentation/DocBook/media/v4l/media-types.xml @@ -0,0 +1,166 @@ +
+Types and flags used to represent the media graph elements + + + Media entity types + + + + + + MEDIA_ENT_F_UNKNOWN and MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN + Unknown entity. That generally indicates that + a driver didn't initialize properly the entity, with is a Kernel bug + + + MEDIA_ENT_F_IO_V4L + Data streaming input and/or output entity. + + + MEDIA_ENT_F_IO_VBI + V4L VBI streaming input or output entity + + + MEDIA_ENT_F_IO_SWRADIO + V4L Software Digital Radio (SDR) streaming input or output entity + + + MEDIA_ENT_F_IO_DTV + DVB Digital TV streaming input or output entity + + + MEDIA_ENT_F_DTV_DEMOD + Digital TV demodulator entity. + + + MEDIA_ENT_F_MPEG_TS_DEMUX + MPEG Transport stream demux entity. Could be implemented on hardware or in Kernelspace by the Linux DVB subsystem. + + + MEDIA_ENT_F_DTV_CA + Digital TV Conditional Access module (CAM) entity + + + MEDIA_ENT_F_DTV_NET_DECAP + Digital TV network ULE/MLE desencapsulation entity. Could be implemented on hardware or in Kernelspace + + + MEDIA_ENT_F_CONN_RF + Connector for a Radio Frequency (RF) signal. + + + MEDIA_ENT_F_CONN_SVIDEO + Connector for a S-Video signal. + + + MEDIA_ENT_F_CONN_COMPOSITE + Connector for a RGB composite signal. + + + MEDIA_ENT_F_CONN_TEST + Connector for a test generator. + + + MEDIA_ENT_F_CAM_SENSOR + Camera video sensor entity. + + + MEDIA_ENT_F_FLASH + Flash controller entity. + + + MEDIA_ENT_F_LENS + Lens controller entity. + + + MEDIA_ENT_F_ATV_DECODER + Analog video decoder, the basic function of the video decoder + is to accept analogue video from a wide variety of sources such as + broadcast, DVD players, cameras and video cassette recorders, in + either NTSC, PAL, SECAM or HD format, separating the stream + into its component parts, luminance and chrominance, and output + it in some digital video standard, with appropriate timing + signals. + + + MEDIA_ENT_F_TUNER + Digital TV, analog TV, radio and/or software radio tuner. + + + +
+ + + Media entity flags + + + + + + MEDIA_ENT_FL_DEFAULT + Default entity for its type. Used to discover the default + audio, VBI and video devices, the default camera sensor, ... + + + +
+ + + Media pad flags + + + + + + MEDIA_PAD_FL_SINK + Input pad, relative to the entity. Input pads sink data and + are targets of links. + + + MEDIA_PAD_FL_SOURCE + Output pad, relative to the entity. Output pads source data + and are origins of links. + + + MEDIA_PAD_FL_MUST_CONNECT + If this flag is set and the pad is linked to any other + pad, then at least one of those links must be enabled for the + entity to be able to stream. There could be temporary reasons + (e.g. device configuration dependent) for the pad to need + enabled links even when this flag isn't set; the absence of the + flag doesn't imply there is none. + + + +
+ + One and only one of MEDIA_PAD_FL_SINK and + MEDIA_PAD_FL_SOURCE must be set for every pad. + + + Media link flags + + + + + + MEDIA_LNK_FL_ENABLED + The link is enabled and can be used to transfer media data. + When two or more links target a sink pad, only one of them can be + enabled at a time. + + + MEDIA_LNK_FL_IMMUTABLE + The link enabled state can't be modified at runtime. An + immutable link is always enabled. + + + MEDIA_LNK_FL_DYNAMIC + The link enabled state can be modified during streaming. This + flag is set by drivers and is read-only for applications. + + + + + +
-- cgit v1.2.3 From eb7d970aa0ab9964fe3200df4daf76c37d35f076 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Dec 2015 10:29:30 -0200 Subject: [media] Docbook: media-types.xml: update the existing tables There were some changes on the media types that were not reflected on the types tables. Update them to reflect the upstream changes. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/media-types.xml | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/media/v4l/media-types.xml b/Documentation/DocBook/media/v4l/media-types.xml index 0c5c9c034586..4a6038301e06 100644 --- a/Documentation/DocBook/media/v4l/media-types.xml +++ b/Documentation/DocBook/media/v4l/media-types.xml @@ -33,7 +33,7 @@ Digital TV demodulator entity. - MEDIA_ENT_F_MPEG_TS_DEMUX + MEDIA_ENT_F_TS_DEMUX MPEG Transport stream demux entity. Could be implemented on hardware or in Kernelspace by the Linux DVB subsystem. @@ -101,6 +101,10 @@ Default entity for its type. Used to discover the default audio, VBI and video devices, the default camera sensor, ... + + MEDIA_ENT_FL_CONNECTOR + The entity represents a data conector + @@ -159,6 +163,15 @@ The link enabled state can be modified during streaming. This flag is set by drivers and is read-only for applications. + + MEDIA_LNK_FL_LINK_TYPE + This is a bitmask that defines the type of the link. + Currently, two types of links are supported: + MEDIA_LNK_FL_DATA_LINK + if the link is between two pads + MEDIA_LNK_FL_INTERFACE_LINK + if the link is between an interface and an entity + -- cgit v1.2.3 From dc7339bf119111d5c08156980ea742fc4120ce19 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Dec 2015 10:54:45 -0200 Subject: [media] DocBook: add a table for Media Controller interfaces Document the media controller interfaces at the media uAPI docbook. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/media-types.xml | 61 +++++++++++++++++++++++++ 1 file changed, 61 insertions(+) (limited to 'Documentation') diff --git a/Documentation/DocBook/media/v4l/media-types.xml b/Documentation/DocBook/media/v4l/media-types.xml index 4a6038301e06..1af384250910 100644 --- a/Documentation/DocBook/media/v4l/media-types.xml +++ b/Documentation/DocBook/media/v4l/media-types.xml @@ -109,6 +109,67 @@ + + Media interface types + + + + + + + MEDIA_INTF_T_DVB_FE + Device node interface for the Digital TV frontend + typically, /dev/dvb/adapter?/frontend? + + + MEDIA_INTF_T_DVB_DEMUX + Device node interface for the Digital TV demux + typically, /dev/dvb/adapter?/demux? + + + MEDIA_INTF_T_DVB_DVR + Device node interface for the Digital TV DVR + typically, /dev/dvb/adapter?/dvr? + + + MEDIA_INTF_T_DVB_CA + Device node interface for the Digital TV Conditional Access + typically, /dev/dvb/adapter?/ca? + + + MEDIA_INTF_T_DVB_FE + Device node interface for the Digital TV network control + typically, /dev/dvb/adapter?/net? + + + MEDIA_INTF_T_V4L_VIDEO + Device node interface for video (V4L) + typically, /dev/video? + + + MEDIA_INTF_T_V4L_VBI + Device node interface for VBI (V4L) + typically, /dev/vbi? + + + MEDIA_INTF_T_V4L_RADIO + Device node interface for radio (V4L) + typically, /dev/vbi? + + + MEDIA_INTF_T_V4L_SUBDEV + Device node interface for a V4L subdevice + typically, /dev/v4l-subdev? + + + MEDIA_INTF_T_V4L_SWRADIO + Device node interface for Software Defined Radio (V4L) + typically, /dev/swradio? + + + +
+ Media pad flags -- cgit v1.2.3 From 677cb4bfc23e7fd8f49d2d10af64f171942fab84 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Dec 2015 10:56:13 -0200 Subject: [media] DocBook: Document MEDIA_IOC_G_TOPOLOGY Add description for this new media controller ioctl. Signed-off-by: Mauro Carvalho Chehab --- .../DocBook/media/v4l/media-controller.xml | 1 + .../DocBook/media/v4l/media-ioc-g-topology.xml | 391 +++++++++++++++++++++ 2 files changed, 392 insertions(+) create mode 100644 Documentation/DocBook/media/v4l/media-ioc-g-topology.xml (limited to 'Documentation') diff --git a/Documentation/DocBook/media/v4l/media-controller.xml b/Documentation/DocBook/media/v4l/media-controller.xml index 63d48decaa6f..5f2fc07a93d7 100644 --- a/Documentation/DocBook/media/v4l/media-controller.xml +++ b/Documentation/DocBook/media/v4l/media-controller.xml @@ -98,6 +98,7 @@ &sub-media-func-ioctl; &sub-media-ioc-device-info; + &sub-media-ioc-g-topology; &sub-media-ioc-enum-entities; &sub-media-ioc-enum-links; &sub-media-ioc-setup-link; diff --git a/Documentation/DocBook/media/v4l/media-ioc-g-topology.xml b/Documentation/DocBook/media/v4l/media-ioc-g-topology.xml new file mode 100644 index 000000000000..e0d49fa329f0 --- /dev/null +++ b/Documentation/DocBook/media/v4l/media-ioc-g-topology.xml @@ -0,0 +1,391 @@ + + + ioctl MEDIA_IOC_G_TOPOLOGY + &manvol; + + + + MEDIA_IOC_G_TOPOLOGY + Enumerate the graph topology and graph element properties + + + + + + int ioctl + int fd + int request + struct media_v2_topology *argp + + + + + + Arguments + + + + fd + + File descriptor returned by + open(). + + + + request + + MEDIA_IOC_G_TOPOLOGY + + + + argp + + + + + + + + + Description + The typical usage of this ioctl is to call it twice. + On the first call, the structure defined at &media-v2-topology; should + be zeroed. At return, if no errors happen, this ioctl will return the + topology_version and the total number of entities, + interfaces, pads and links. + Before the second call, the userspace should allocate arrays to + store the graph elements that are desired, putting the pointers to them + at the ptr_entities, ptr_interfaces, ptr_links and/or ptr_pads, keeping + the other values untouched. + If the topology_version remains the same, the + ioctl should fill the desired arrays with the media graph elements. + +
+ struct <structname>media_v2_topology</structname> + + + + + + + + + __u64 + topology_version + + + Version of the media graph topology. When the graph is + created, this field starts with zero. Every time a graph + element is added or removed, this field is + incremented. + + + __u64 + num_entities + + + Number of entities in the graph + + + __u64 + ptr_entities + + + A pointer to a memory area where the entities array + will be stored, converted to a 64-bits integer. + It can be zero. if zero, the ioctl won't store the + entities. It will just update + num_entities + + + __u64 + num_interfaces + + + Number of interfaces in the graph + + + __u64 + ptr_interfaces + + + A pointer to a memory area where the interfaces array + will be stored, converted to a 64-bits integer. + It can be zero. if zero, the ioctl won't store the + interfaces. It will just update + num_interfaces + + + __u64 + num_pads + + + Total number of pads in the graph + + + __u64 + ptr_pads + + + A pointer to a memory area where the pads array + will be stored, converted to a 64-bits integer. + It can be zero. if zero, the ioctl won't store the + pads. It will just update + num_pads + + + __u64 + num_links + + + Total number of data and interface links in the graph + + + __u64 + ptr_links + + + A pointer to a memory area where the links array + will be stored, converted to a 64-bits integer. + It can be zero. if zero, the ioctl won't store the + links. It will just update + num_links + + + +
+ + + struct <structname>media_v2_entity</structname> + + + + + + + + + __u32 + id + + + Unique ID for the entity. + + + char + name[64] + + + Entity name as an UTF-8 NULL-terminated string. + + + __u32 + function + + + Entity main function, see for details. + + + __u32 + reserved[12] + Reserved for future extensions. Drivers and applications must + set this array to zero. + + + +
+ + + struct <structname>media_v2_interface</structname> + + + + + + + + + __u32 + id + + + Unique ID for the interface. + + + __u32 + intf_type + + + Interface type, see for details. + + + __u32 + flags + + + Interface flags. Currently unused. + + + __u32 + reserved[9] + + + Reserved for future extensions. Drivers and applications must + set this array to zero. + + + struct media_v2_intf_devnode + devnode + + + Used only for device node interfaces. See for details.. + + + +
+ + + struct <structname>media_v2_interface</structname> + + + + + + + + + __u32 + major + + + Device node major number. + + + __u32 + minor + + + Device node minor number. + + + +
+ + + struct <structname>media_v2_pad</structname> + + + + + + + + + __u32 + id + + + Unique ID for the pad. + + + __u32 + entity_id + + + Unique ID for the entity where this pad belongs. + + + __u32 + flags + + + Pad flags, see for more details. + + + __u32 + reserved[9] + + + Reserved for future extensions. Drivers and applications must + set this array to zero. + + + +
+ + + struct <structname>media_v2_pad</structname> + + + + + + + + + __u32 + id + + + Unique ID for the pad. + + + __u32 + source_id + + + + On pad to pad links: unique ID for the source pad. + On interface to entity links: unique ID for the interface. + + + + __u32 + sink_id + + + + On pad to pad links: unique ID for the sink pad. + On interface to entity links: unique ID for the entity. + + + + __u32 + flags + + + Link flags, see for more details. + + + __u32 + reserved[5] + + + Reserved for future extensions. Drivers and applications must + set this array to zero. + + + + + + + + + &return-value; + + + + ENOSPC + + This is returned when either one or more of the num_entities, + num_interfaces, num_links or num_pads are non-zero and are smaller + than the actual number of elements inside the graph. This may happen + if the topology_version changed when compared + to the last time this ioctl was called. Userspace should usually + free the area for the pointers, zero the struct elements and call + this ioctl again. + + + + + -- cgit v1.2.3 From be0270ec89e6b9b49de7e533dd1f3a89ad34d205 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 28 Dec 2015 12:03:47 -0200 Subject: [media] Postpone the addition of MEDIA_IOC_G_TOPOLOGY There are a few discussions left with regards to this ioctl: 1) the name of the new structs will contain _v2_ on it? 2) what's the best alternative to avoid compat32 issues? Due to that, let's postpone the addition of this new ioctl to the next Kernel version, to give people more time to discuss it. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/media-ioc-g-topology.xml | 3 +++ drivers/media/media-device.c | 7 ++++++- include/uapi/linux/media.h | 6 +++++- 3 files changed, 14 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/media/v4l/media-ioc-g-topology.xml b/Documentation/DocBook/media/v4l/media-ioc-g-topology.xml index e0d49fa329f0..63152ab9efba 100644 --- a/Documentation/DocBook/media/v4l/media-ioc-g-topology.xml +++ b/Documentation/DocBook/media/v4l/media-ioc-g-topology.xml @@ -48,6 +48,9 @@ Description + + NOTE: This new ioctl is programmed to be added on Kernel 4.6. Its definition/arguments may change until its final version. + The typical usage of this ioctl is to call it twice. On the first call, the structure defined at &media-v2-topology; should be zeroed. At return, if no errors happen, this ioctl will return the diff --git a/drivers/media/media-device.c b/drivers/media/media-device.c index 4d1c13de494b..7dae0ac0f3ae 100644 --- a/drivers/media/media-device.c +++ b/drivers/media/media-device.c @@ -234,6 +234,7 @@ static long media_device_setup_link(struct media_device *mdev, return ret; } +#if 0 /* Let's postpone it to Kernel 4.6 */ static long __media_device_get_topology(struct media_device *mdev, struct media_v2_topology *topo) { @@ -389,6 +390,7 @@ static long media_device_get_topology(struct media_device *mdev, return 0; } +#endif static long media_device_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) @@ -422,13 +424,14 @@ static long media_device_ioctl(struct file *filp, unsigned int cmd, mutex_unlock(&dev->graph_mutex); break; +#if 0 /* Let's postpone it to Kernel 4.6 */ case MEDIA_IOC_G_TOPOLOGY: mutex_lock(&dev->graph_mutex); ret = media_device_get_topology(dev, (struct media_v2_topology __user *)arg); mutex_unlock(&dev->graph_mutex); break; - +#endif default: ret = -ENOIOCTLCMD; } @@ -477,7 +480,9 @@ static long media_device_compat_ioctl(struct file *filp, unsigned int cmd, case MEDIA_IOC_DEVICE_INFO: case MEDIA_IOC_ENUM_ENTITIES: case MEDIA_IOC_SETUP_LINK: +#if 0 /* Let's postpone it to Kernel 4.6 */ case MEDIA_IOC_G_TOPOLOGY: +#endif return media_device_ioctl(filp, cmd, arg); case MEDIA_IOC_ENUM_LINKS32: diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h index 5dbb208e5451..1e3c8cb43bd7 100644 --- a/include/uapi/linux/media.h +++ b/include/uapi/linux/media.h @@ -286,7 +286,7 @@ struct media_links_enum { * later, before the adding this API upstream. */ - +#if 0 /* Let's postpone it to Kernel 4.6 */ struct media_v2_entity { __u32 id; char name[64]; /* FIXME: move to a property? (RFC says so) */ @@ -351,6 +351,7 @@ static inline void __user *media_get_uptr(__u64 arg) { return (void __user *)(uintptr_t)arg; } +#endif /* ioctls */ @@ -358,6 +359,9 @@ static inline void __user *media_get_uptr(__u64 arg) #define MEDIA_IOC_ENUM_ENTITIES _IOWR('|', 0x01, struct media_entity_desc) #define MEDIA_IOC_ENUM_LINKS _IOWR('|', 0x02, struct media_links_enum) #define MEDIA_IOC_SETUP_LINK _IOWR('|', 0x03, struct media_link_desc) + +#if 0 /* Let's postpone it to Kernel 4.6 */ #define MEDIA_IOC_G_TOPOLOGY _IOWR('|', 0x04, struct media_v2_topology) +#endif #endif /* __LINUX_MEDIA_H */ -- cgit v1.2.3 From d0239e1bf5204d602281f93c01d46bcf3531098d Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Fri, 8 Jan 2016 16:57:48 -0800 Subject: f2fs: detect idle time depending on user behavior This patch adds last time that user requested filesystem operations. This information is used to detect whether system is idle or not later. Signed-off-by: Jaegeuk Kim --- Documentation/ABI/testing/sysfs-fs-f2fs | 6 ++++++ fs/f2fs/data.c | 1 + fs/f2fs/dir.c | 4 ++++ fs/f2fs/f2fs.h | 15 +++++++++++++++ fs/f2fs/file.c | 12 ++++++++++++ fs/f2fs/gc.c | 1 - fs/f2fs/gc.h | 8 -------- fs/f2fs/segment.c | 2 +- fs/f2fs/super.c | 4 ++++ fs/f2fs/xattr.c | 1 + 10 files changed, 44 insertions(+), 10 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 0345f2d1c727..e5200f354abf 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -87,6 +87,12 @@ Contact: "Jaegeuk Kim" Description: Controls the checkpoint timing. +What: /sys/fs/f2fs//idle_interval +Date: January 2016 +Contact: "Jaegeuk Kim" +Description: + Controls the idle timing. + What: /sys/fs/f2fs//ra_nid_pages Date: October 2015 Contact: "Chao Yu" diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index a3bce12b0cce..ac9e7c6aac74 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -1596,6 +1596,7 @@ static int f2fs_write_end(struct file *file, } f2fs_put_page(page, 1); + f2fs_update_time(F2FS_I_SB(inode), REQ_TIME); return copied; } diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c index 29bb8dd76a46..faa7495e2d7e 100644 --- a/fs/f2fs/dir.c +++ b/fs/f2fs/dir.c @@ -636,6 +636,7 @@ fail: f2fs_put_page(dentry_page, 1); out: f2fs_fname_free_filename(&fname); + f2fs_update_time(F2FS_I_SB(dir), REQ_TIME); return err; } @@ -657,6 +658,7 @@ int f2fs_do_tmpfile(struct inode *inode, struct inode *dir) clear_inode_flag(F2FS_I(inode), FI_NEW_INODE); fail: up_write(&F2FS_I(inode)->i_sem); + f2fs_update_time(F2FS_I_SB(inode), REQ_TIME); return err; } @@ -701,6 +703,8 @@ void f2fs_delete_entry(struct f2fs_dir_entry *dentry, struct page *page, int slots = GET_DENTRY_SLOTS(le16_to_cpu(dentry->name_len)); int i; + f2fs_update_time(F2FS_I_SB(dir), REQ_TIME); + if (f2fs_has_inline_dentry(dir)) return f2fs_delete_inline_entry(dentry, page, dir, inode); diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 5bbb6a407e79..4331b9fe6f27 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -21,6 +21,7 @@ #include #include #include +#include #ifdef CONFIG_F2FS_CHECK_FS #define f2fs_bug_on(sbi, condition) BUG_ON(condition) @@ -126,6 +127,7 @@ enum { #define BATCHED_TRIM_BLOCKS(sbi) \ (BATCHED_TRIM_SEGMENTS(sbi) << (sbi)->log_blocks_per_seg) #define DEF_CP_INTERVAL 60 /* 60 secs */ +#define DEF_IDLE_INTERVAL 120 /* 2 mins */ struct cp_control { int reason; @@ -723,6 +725,7 @@ enum { enum { CP_TIME, + REQ_TIME, MAX_TIME, }; @@ -856,6 +859,18 @@ static inline bool f2fs_time_over(struct f2fs_sb_info *sbi, int type) return time_after(jiffies, sbi->last_time[type] + interval); } +static inline bool is_idle(struct f2fs_sb_info *sbi) +{ + struct block_device *bdev = sbi->sb->s_bdev; + struct request_queue *q = bdev_get_queue(bdev); + struct request_list *rl = &q->root_rl; + + if (rl->count[BLK_RW_SYNC] || rl->count[BLK_RW_ASYNC]) + return 0; + + return f2fs_time_over(sbi, REQ_TIME); +} + /* * Inline functions */ diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index ff06827aa369..3d43857e9892 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -96,6 +96,7 @@ mapped: clear_cold_data(page); out: sb_end_pagefault(inode->i_sb); + f2fs_update_time(sbi, REQ_TIME); return block_page_mkwrite_return(err); } @@ -280,6 +281,7 @@ flush_out: remove_ino_entry(sbi, ino, UPDATE_INO); clear_inode_flag(fi, FI_UPDATE_WRITE); ret = f2fs_issue_flush(sbi); + f2fs_update_time(sbi, REQ_TIME); out: trace_f2fs_sync_file_exit(inode, need_cp, datasync, ret); f2fs_trace_ios(NULL, 1); @@ -485,6 +487,7 @@ int truncate_data_blocks_range(struct dnode_of_data *dn, int count) } dn->ofs_in_node = ofs; + f2fs_update_time(sbi, REQ_TIME); trace_f2fs_truncate_data_blocks_range(dn->inode, dn->nid, dn->ofs_in_node, nr_free); return nr_free; @@ -1236,6 +1239,7 @@ static long f2fs_fallocate(struct file *file, int mode, if (!ret) { inode->i_mtime = inode->i_ctime = CURRENT_TIME; mark_inode_dirty(inode); + f2fs_update_time(F2FS_I_SB(inode), REQ_TIME); } out: @@ -1351,6 +1355,8 @@ static int f2fs_ioc_start_atomic_write(struct file *filp) return ret; set_inode_flag(F2FS_I(inode), FI_ATOMIC_FILE); + f2fs_update_time(F2FS_I_SB(inode), REQ_TIME); + return 0; } @@ -1398,6 +1404,7 @@ static int f2fs_ioc_start_volatile_write(struct file *filp) return ret; set_inode_flag(F2FS_I(inode), FI_VOLATILE_FILE); + f2fs_update_time(F2FS_I_SB(inode), REQ_TIME); return 0; } @@ -1439,6 +1446,7 @@ static int f2fs_ioc_abort_volatile_write(struct file *filp) } mnt_drop_write_file(filp); + f2fs_update_time(F2FS_I_SB(inode), REQ_TIME); return ret; } @@ -1478,6 +1486,7 @@ static int f2fs_ioc_shutdown(struct file *filp, unsigned long arg) default: return -EINVAL; } + f2fs_update_time(sbi, REQ_TIME); return 0; } @@ -1508,6 +1517,7 @@ static int f2fs_ioc_fitrim(struct file *filp, unsigned long arg) if (copy_to_user((struct fstrim_range __user *)arg, &range, sizeof(range))) return -EFAULT; + f2fs_update_time(F2FS_I_SB(inode), REQ_TIME); return 0; } @@ -1531,6 +1541,7 @@ static int f2fs_ioc_set_encryption_policy(struct file *filp, unsigned long arg) sizeof(policy))) return -EFAULT; + f2fs_update_time(F2FS_I_SB(inode), REQ_TIME); return f2fs_process_policy(&policy, inode); #else return -EOPNOTSUPP; @@ -1807,6 +1818,7 @@ static int f2fs_ioc_defragment(struct file *filp, unsigned long arg) } err = f2fs_defragment_range(sbi, filp, &range); + f2fs_update_time(sbi, REQ_TIME); if (err < 0) goto out; diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c index c09be339569c..f610c2a9bdde 100644 --- a/fs/f2fs/gc.c +++ b/fs/f2fs/gc.c @@ -16,7 +16,6 @@ #include #include #include -#include #include "f2fs.h" #include "node.h" diff --git a/fs/f2fs/gc.h b/fs/f2fs/gc.h index b4a65be9f7d3..a993967dcdb9 100644 --- a/fs/f2fs/gc.h +++ b/fs/f2fs/gc.h @@ -100,11 +100,3 @@ static inline bool has_enough_invalid_blocks(struct f2fs_sb_info *sbi) return true; return false; } - -static inline int is_idle(struct f2fs_sb_info *sbi) -{ - struct block_device *bdev = sbi->sb->s_bdev; - struct request_queue *q = bdev_get_queue(bdev); - struct request_list *rl = &q->root_rl; - return !(rl->count[BLK_RW_SYNC]) && !(rl->count[BLK_RW_ASYNC]); -} diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c index fed23d5a7b34..d8ad1abfa4fd 100644 --- a/fs/f2fs/segment.c +++ b/fs/f2fs/segment.c @@ -293,7 +293,7 @@ void f2fs_balance_fs_bg(struct f2fs_sb_info *sbi) if (!available_free_memory(sbi, NAT_ENTRIES) || excess_prefree_segs(sbi) || !available_free_memory(sbi, INO_ENTRIES) || - f2fs_time_over(sbi, CP_TIME)) { + (is_idle(sbi) && f2fs_time_over(sbi, CP_TIME))) { if (test_opt(sbi, DATA_FLUSH)) sync_dirty_inodes(sbi, FILE_INODE); f2fs_sync_fs(sbi->sb, true); diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 787047f59c00..3bf990b80026 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -219,6 +219,7 @@ F2FS_RW_ATTR(NM_INFO, f2fs_nm_info, ra_nid_pages, ra_nid_pages); F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, max_victim_search, max_victim_search); F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, dir_level, dir_level); F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, cp_interval, interval_time[CP_TIME]); +F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, idle_interval, interval_time[REQ_TIME]); #define ATTR_LIST(name) (&f2fs_attr_##name.attr) static struct attribute *f2fs_attrs[] = { @@ -237,6 +238,7 @@ static struct attribute *f2fs_attrs[] = { ATTR_LIST(ram_thresh), ATTR_LIST(ra_nid_pages), ATTR_LIST(cp_interval), + ATTR_LIST(idle_interval), NULL, }; @@ -1123,6 +1125,7 @@ static void init_sb_info(struct f2fs_sb_info *sbi) sbi->dir_level = DEF_DIR_LEVEL; sbi->interval_time[CP_TIME] = DEF_CP_INTERVAL; + sbi->interval_time[REQ_TIME] = DEF_IDLE_INTERVAL; clear_sbi_flag(sbi, SBI_NEED_FSCK); INIT_LIST_HEAD(&sbi->s_list); @@ -1468,6 +1471,7 @@ try_onemore: } f2fs_update_time(sbi, CP_TIME); + f2fs_update_time(sbi, REQ_TIME); return 0; free_kobj: diff --git a/fs/f2fs/xattr.c b/fs/f2fs/xattr.c index 822a8af89c12..0108f487cc8e 100644 --- a/fs/f2fs/xattr.c +++ b/fs/f2fs/xattr.c @@ -618,5 +618,6 @@ int f2fs_setxattr(struct inode *inode, int index, const char *name, up_write(&F2FS_I(inode)->i_sem); f2fs_unlock_op(sbi); + f2fs_update_time(sbi, REQ_TIME); return err; } -- cgit v1.2.3 From a13c7c51fd91deb7a8a8535ff14fed283f1a2187 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 4 Dec 2015 10:10:03 +0900 Subject: dt-bindings: regulator/clock/mfd: Reorganize S2MPS-family bindings Bindings for Samsung S2M and S5M family PMICs are in mess. They are spread over different files and subdirectories in a non-consistent way. The devices and respective drivers for them share a lot in common so everything could be organized in a more readable way. Reorganize the S2MPS11/13/14/15 Device Tree bindings to match the drivers for this family of devices: - move mfd/s2mps11.txt to mfd/samsung,sec-core.txt for the main MFD driver (common for entire family), - split clock block to clock/samsung,s2mps11.txt, - split regulator block to regulator/samsung,s2mps11.txt. Signed-off-by: Krzysztof Kozlowski Acked-by: Michael Turquette Acked-by: Rob Herring Acked-by: Mark Brown Signed-off-by: Lee Jones --- .../devicetree/bindings/clock/samsung,s2mps11.txt | 49 +++++++ Documentation/devicetree/bindings/mfd/s2mps11.txt | 153 --------------------- .../devicetree/bindings/mfd/samsung,sec-core.txt | 84 +++++++++++ .../bindings/regulator/samsung,s2mps11.txt | 102 ++++++++++++++ MAINTAINERS | 4 +- 5 files changed, 238 insertions(+), 154 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/samsung,s2mps11.txt delete mode 100644 Documentation/devicetree/bindings/mfd/s2mps11.txt create mode 100644 Documentation/devicetree/bindings/mfd/samsung,sec-core.txt create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt new file mode 100644 index 000000000000..2726c1d58a79 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt @@ -0,0 +1,49 @@ +Binding for Samsung S2M and S5M family clock generator block +============================================================ + +This is a part of device tree bindings for S2M and S5M family multi-function +devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz +outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs. + +To register these as clocks with common clock framework instantiate under +main device node a sub-node named "clocks". + +It uses the common clock binding documented in: + - Documentation/devicetree/bindings/clock/clock-bindings.txt + + +Required properties of the "clocks" sub-node: + - #clock-cells: should be 1. + - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", + "samsung,s2mps14-clk", "samsung,s5m8767-clk" + The S2MPS15 uses the same compatible as S2MPS13, as both provides similar + clocks. + + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + Clock ID Devices + ---------------------------------------------------------- + 32KhzAP 0 S2MPS11/13/14/15, S5M8767 + 32KhzCP 1 S2MPS11/13/15, S5M8767 + 32KhzBT 2 S2MPS11/13/14/15, S5M8767 + +Include dt-bindings/clock/samsung,s2mps11.h file to use preprocessor defines +in device tree sources. + + +Example: + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + s2m_osc: clocks { + compatible = "samsung,s2mps11-clk"; + #clock-cells = <1>; + clock-output-names = "xx", "yy", "zz"; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt deleted file mode 100644 index 09b94c97faac..000000000000 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ /dev/null @@ -1,153 +0,0 @@ - -* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator - -The Samsung S2MPS11 is a multi-function device which includes voltage and -current regulators, RTC, charger controller and other sub-blocks. It is -interfaced to the host controller using an I2C interface. Each sub-block is -addressed by the host system using different I2C slave addresses. - -Required properties: -- compatible: Should be one of the following - - "samsung,s2mps11-pmic" - - "samsung,s2mps13-pmic" - - "samsung,s2mps14-pmic" - - "samsung,s2mps15-pmic" - - "samsung,s2mpu02-pmic". -- reg: Specifies the I2C slave address of the pmic block. It should be 0x66. - -Optional properties: -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the interrupts from s2mps11 are delivered to. -- interrupts: Interrupt specifiers for interrupt sources. -- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled - down. When the system is suspended it will always go down thus triggerring - unwanted buck warm reset (setting buck voltages to default values). -- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is - connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 - register to turn off the power. Usually the ACOKB is pulled up to VBATT so - when PWRHOLD pin goes low, the rising ACOKB will trigger power off. - -Optional nodes: -- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768 - KHz outputs, so to register these as clocks with common clock framework - instantiate a sub-node named "clocks". It uses the common clock binding - documented in : - [Documentation/devicetree/bindings/clock/clock-bindings.txt] - The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs. - - #clock-cells: should be 1. - - - The following is the list of clocks generated by the controller. Each clock - is assigned an identifier and client nodes use this identifier to specify - the clock which they consume. - Clock ID Devices - ---------------------------------------------------------- - 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 - 32KhzCP 1 S2MPS11, S2MPS13, S2MPS15, S5M8767 - 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 - - - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", - "samsung,s2mps14-clk", "samsung,s5m8767-clk" - The s2msp15 uses the same compatible as s2mps13, as both provides similar clocks. - -- regulators: The regulators of s2mps11 that have to be instantiated should be -included in a sub-node named 'regulators'. Regulator nodes included in this -sub-node should be of the format as listed below. - - regulator_name { - [standard regulator constraints....]; - }; - - regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us - - BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly - regulator-ramp-delay = <0> can be used for them to disable ramp delay. - In the absence of the regulator-ramp-delay property, the default ramp - delay will be used. - -NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set -for a particular group of BUCKs. So provide same regulator-ramp-delay. -Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6], -BUCK[3, 4], and BUCK[7, 8, 10] - -On S2MPS14 the LDO10, LDO11 and LDO12 can be configured to external control -over GPIO. To turn this feature on this property must be added to the regulator -sub-node: - - samsung,ext-control-gpios: GPIO specifier for one GPIO - controlling this regulator (enable/disable); -Example: - LDO12 { - regulator-name = "V_EMMC_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; - }; - - -The regulator constraints inside the regulator nodes use the standard regulator -bindings which are documented elsewhere. - -The following are the names of the regulators that the s2mps11 pmic block -supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of s2mps11. - - - LDOn - - valid values for n are: - - S2MPS11: 1 to 38 - - S2MPS13: 1 to 40 - - S2MPS14: 1 to 25 - - S2MPS15: 1 to 27 - - S2MPU02: 1 to 28 - - Example: LDO1, LDO2, LDO28 - - BUCKn - - valid values for n are: - - S2MPS11: 1 to 10 - - S2MPS13: 1 to 10 - - S2MPS14: 1 to 5 - - S2MPS15: 1 to 10 - - S2MPU02: 1 to 7 - - Example: BUCK1, BUCK2, BUCK9 - -Example: - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - - s2m_osc: clocks { - compatible = "samsung,s2mps11-clk"; - #clock-cells = <1>; - clock-output-names = "xx", "yy", "zz"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt new file mode 100644 index 000000000000..ef0166d0f643 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt @@ -0,0 +1,84 @@ +Binding for Samsung S2M and S5M family multi-function device +============================================================ + +This is a part of device tree bindings for S2M and S5M family multi-function +devices. + +The Samsung S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family +of multi-function devices which include voltage and current regulators, RTC, +charger controller, clock outputs and other sub-blocks. It is interfaced +to the host controller using an I2C interface. Each sub-block is usually +addressed by the host system using different I2C slave addresses. + + +This document describes bindings for main device node. Optional sub-blocks +must be a sub-nodes to it. Bindings for them can be found in: + - bindings/regulator/samsung,s2mps11.txt + - bindings/clock/samsung,s2mps11.txt + + +Required properties: + - compatible: Should be one of the following + - "samsung,s2mps11-pmic", + - "samsung,s2mps13-pmic", + - "samsung,s2mps14-pmic", + - "samsung,s2mps15-pmic", + - "samsung,s2mpu02-pmic". + - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. + +Optional properties: + - interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from s2mps11 are delivered to. + - interrupts: Interrupt specifiers for interrupt sources. + - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled + down. When the system is suspended it will always go down thus triggerring + unwanted buck warm reset (setting buck voltages to default values). + - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is + connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 + register to turn off the power. Usually the ACOKB is pulled up to VBATT so + when PWRHOLD pin goes low, the rising ACOKB will trigger power off. + +Example: + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + s2m_osc: clocks { + compatible = "samsung,s2mps11-clk"; + #clock-cells = <1>; + clock-output-names = "xx", "yy", "zz"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt new file mode 100644 index 000000000000..27a48bf1b185 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt @@ -0,0 +1,102 @@ +Binding for Samsung S2M family regulator block +============================================== + +This is a part of device tree bindings for S2M family multi-function devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators. + +To register these with regulator framework instantiate under main device node +a sub-node named "regulators" with more sub-nodes for each regulator using the +common regulator binding documented in: + - Documentation/devicetree/bindings/regulator/regulator.txt + + +Names of regulators supported by different devices: + - LDOn + - valid values for n are: + - S2MPS11: 1 to 38 + - S2MPS13: 1 to 40 + - S2MPS14: 1 to 25 + - S2MPS15: 1 to 27 + - S2MPU02: 1 to 28 + - Example: LDO1, LDO2, LDO28 + - BUCKn + - valid values for n are: + - S2MPS11: 1 to 10 + - S2MPS13: 1 to 10 + - S2MPS14: 1 to 5 + - S2MPS15: 1 to 10 + - S2MPU02: 1 to 7 + - Example: BUCK1, BUCK2, BUCK9 +Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of device. + + +Optional properties of the nodes under "regulators" sub-node: + - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500, + 25000 (default) or 50000. + + Additionally S2MPS11 supports disabling ramp delay for BUCK{2,3,4,6} + by setting it to <0>. + + Note: On S2MPS11 some bucks share the ramp rate setting i.e. same ramp value + will be set for a particular group of bucks so provide the same + regulator-ramp-delay value for them. + Groups sharing ramp rate: + - buck{1,6}, + - buck{3,4}, + - buck{7,8,10}. + + - samsung,ext-control-gpios: On S2MPS14 the LDO10, LDO11 and LDO12 can be + configured to external control over GPIO. To turn this feature on this + property must be added to the regulator sub-node: + - samsung,ext-control-gpios: GPIO specifier for one GPIO + controlling this regulator (enable/disable) + Example: + LDO12 { + regulator-name = "V_EMMC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + samsung,ext-control-gpios = <&gpk0 2 0>; + }; + + +Example: + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 25b727556dc7..2c0bbced0532 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9224,7 +9224,9 @@ F: drivers/clk/clk-s2mps11.c F: drivers/rtc/rtc-s5m.c F: include/linux/mfd/samsung/ F: Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt -F: Documentation/devicetree/bindings/mfd/s2mp*.txt +F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +F: Documentation/devicetree/bindings/regulator/samsung,s2m*.txt +F: Documentation/devicetree/bindings/clock/samsung,s2mps11.txt SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS M: Kyungmin Park -- cgit v1.2.3 From 27383ca93b58dfb552ff51fc55fe48006d3c7d99 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 4 Dec 2015 10:10:04 +0900 Subject: dt-bindings: regulator/mfd: Reorganize S5M8767 bindings The regulator/s5m8767-regulator.txt duplicates some of the information about bindings with old mfd/s2mps11.txt. Now common part exists entirely in mfd/samsung,sec-core.txt so: - add company prefix to file name (regulator/samsung,s5m8767.txt), - remove duplicated information, - reorganize the contents to match style of regulator/samsung,s2mps11.txt. Signed-off-by: Krzysztof Kozlowski Acked-by: Mark Brown Acked-by: Rob Herring Signed-off-by: Lee Jones --- .../devicetree/bindings/mfd/samsung,sec-core.txt | 4 +- .../bindings/regulator/s5m8767-regulator.txt | 163 --------------------- .../bindings/regulator/samsung,s5m8767.txt | 145 ++++++++++++++++++ MAINTAINERS | 2 +- 4 files changed, 149 insertions(+), 165 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt index ef0166d0f643..4aeb95c82304 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt @@ -14,6 +14,7 @@ addressed by the host system using different I2C slave addresses. This document describes bindings for main device node. Optional sub-blocks must be a sub-nodes to it. Bindings for them can be found in: - bindings/regulator/samsung,s2mps11.txt + - bindings/regulator/samsung,s5m8767.txt - bindings/clock/samsung,s2mps11.txt @@ -23,7 +24,8 @@ Required properties: - "samsung,s2mps13-pmic", - "samsung,s2mps14-pmic", - "samsung,s2mps15-pmic", - - "samsung,s2mpu02-pmic". + - "samsung,s2mpu02-pmic", + - "samsung,s5m8767-pmic". - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt deleted file mode 100644 index 20191315e444..000000000000 --- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt +++ /dev/null @@ -1,163 +0,0 @@ -* Samsung S5M8767 Voltage and Current Regulator - -The Samsung S5M8767 is a multi-function device which includes voltage and -current regulators, rtc, charger controller and other sub-blocks. It is -interfaced to the host controller using a i2c interface. Each sub-block is -addressed by the host system using different i2c slave address. This document -describes the bindings for 'pmic' sub-block of s5m8767. - -Required properties: -- compatible: Should be "samsung,s5m8767-pmic". -- reg: Specifies the i2c slave address of the pmic block. It should be 0x66. - -- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) - units for buck2 when changing voltage using gpio dvs. Refer to [1] below - for additional information. - -- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV) - units for buck3 when changing voltage using gpio dvs. Refer to [1] below - for additional information. - -- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV) - units for buck4 when changing voltage using gpio dvs. Refer to [1] below - for additional information. - -- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used - for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines. - -[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional - property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage' - property should specify atleast one voltage level (which would be a - safe operating voltage). - - If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional - property is specified, then all the eight voltage values for the - 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified. - -Optional properties: -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the interrupts from s5m8767 are delivered to. -- interrupts: Interrupt specifiers for two interrupt sources. - - First interrupt specifier is for 'irq1' interrupt. - - Second interrupt specifier is for 'alert' interrupt. -- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. -- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs. -- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs. - -Additional properties required if either of the optional properties are used: - -- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from - the possible 8 options selectable by the dvs gpios. The value of this - property should be between 0 and 7. If not specified or if out of range, the - default value of this property is set to 0. - -- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used - for dvs. The format of the gpio specifier depends in the gpio controller. - -Regulators: The regulators of s5m8767 that have to be instantiated should be -included in a sub-node named 'regulators'. Regulator nodes included in this -sub-node should be of the format as listed below. - - regulator_name { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_1.0V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - }; -The above regulator entries are defined in regulator bindings documentation -except these properties: - - op_mode: describes the different operating modes of the LDO's with - power mode change in SOC. The different possible values are, - 0 - always off mode - 1 - on in normal mode - 2 - low power mode - 3 - suspend mode - - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one - GPIO controlling this regulator (enable/disable); This is - valid only for buck9. - -The following are the names of the regulators that the s5m8767 pmic block -supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of s5m8767. - - - LDOn - - valid values for n are 1 to 28 - - Example: LDO1, LDO2, LDO28 - - BUCKn - - valid values for n are 1 to 9. - - Example: BUCK1, BUCK2, BUCK9 - -The bindings inside the regulator nodes use the standard regulator bindings -which are documented elsewhere. - -Example: - - s5m8767_pmic@66 { - compatible = "samsung,s5m8767-pmic"; - reg = <0x66>; - - s5m8767,pmic-buck2-uses-gpio-dvs; - s5m8767,pmic-buck3-uses-gpio-dvs; - s5m8767,pmic-buck4-uses-gpio-dvs; - - s5m8767,pmic-buck-default-dvs-idx = <0>; - - s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */ - <&gpx0 1 0>, /* DVS2 */ - <&gpx0 2 0>; /* DVS3 */ - - s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */ - <&gpx2 4 0>, /* SET2 */ - <&gpx2 5 0>; /* SET3 */ - - s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, - <1250000>, <1200000>, - <1150000>, <1100000>, - <1000000>, <950000>; - - s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, - <1100000>, <1100000>, - <1000000>, <1000000>, - <1000000>, <1000000>; - - s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - op_mode = <1>; /* Normal Mode */ - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_MIF_1.2V"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - vemmc_reg: BUCK9 { - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - op_mode = <3>; /* Standby Mode */ - s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt new file mode 100644 index 000000000000..093edda0c8df --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt @@ -0,0 +1,145 @@ +Binding for Samsung S5M8767 regulator block +=========================================== + +This is a part of device tree bindings for S5M family multi-function devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S5M8767 device provide buck and LDO regulators. + +To register these with regulator framework instantiate under main device node +a sub-node named "regulators" with more sub-nodes for each regulator using the +common regulator binding documented in: + - Documentation/devicetree/bindings/regulator/regulator.txt + + +Required properties of the main device node (the parent!): + - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck2 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + + - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck3 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + + - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck4 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + + - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used + for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines. + + [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional + property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage' + property should specify atleast one voltage level (which would be a + safe operating voltage). + + If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional + property is specified, then all the eight voltage values for the + 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified. + +Optional properties of the main device node (the parent!): + - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. + - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs. + - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs. + +Additional properties required if either of the optional properties are used: + + - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from + the possible 8 options selectable by the dvs gpios. The value of this + property should be between 0 and 7. If not specified or if out of range, the + default value of this property is set to 0. + + - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used + for dvs. The format of the gpio specifier depends in the gpio controller. + + +Names of regulators supported by S5M8767 device: + - LDOn + - valid values for n are 1 to 28 + - Example: LDO1, LDO2, LDO28 + - BUCKn + - valid values for n are 1 to 9. + - Example: BUCK1, BUCK2, BUCK9 +Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of device. + + +Optional properties of the nodes under "regulators" sub-node: + - op_mode: describes the different operating modes of the LDO's with + power mode change in SOC. The different possible values are, + 0 - always off mode + 1 - on in normal mode + 2 - low power mode + 3 - suspend mode + - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one + GPIO controlling this regulator + (enable/disable); This is valid only + for buck9. + +Example: + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck2-uses-gpio-dvs; + s5m8767,pmic-buck3-uses-gpio-dvs; + s5m8767,pmic-buck4-uses-gpio-dvs; + + s5m8767,pmic-buck-default-dvs-idx = <0>; + + s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */ + <&gpx0 1 0>, /* DVS2 */ + <&gpx0 2 0>; /* DVS3 */ + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */ + <&gpx2 4 0>, /* SET2 */ + <&gpx2 5 0>; /* SET3 */ + + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vemmc_reg: BUCK9 { + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <3>; /* Standby Mode */ + s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 2c0bbced0532..5d38715eced5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9223,9 +9223,9 @@ F: drivers/regulator/s5m*.c F: drivers/clk/clk-s2mps11.c F: drivers/rtc/rtc-s5m.c F: include/linux/mfd/samsung/ -F: Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt F: Documentation/devicetree/bindings/regulator/samsung,s2m*.txt +F: Documentation/devicetree/bindings/regulator/samsung,s5m*.txt F: Documentation/devicetree/bindings/clock/samsung,s2mps11.txt SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS -- cgit v1.2.3 From 5d1d147f040253cbdccc6dbdd14a002403cf8490 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 4 Dec 2015 10:10:05 +0900 Subject: dt-bindings: regulator/mfd: Reorganize S2MPA01 bindings The mfd/s2mpa01.txt duplicates some of the information about bindings with old mfd/s2mps11.txt. Now common part exists entirely in mfd/samsung,sec-core.txt so: - add company prefix to file name (regulator/samsung,s2mpa01.txt), - remove duplicated information, - reorganize the contents to match style of regulator/samsung,s2mps11.txt. Signed-off-by: Krzysztof Kozlowski Acked-by: Mark Brown Acked-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/s2mpa01.txt | 90 ---------------------- .../devicetree/bindings/mfd/samsung,sec-core.txt | 4 +- .../bindings/regulator/samsung,s2mpa01.txt | 79 +++++++++++++++++++ 3 files changed, 82 insertions(+), 91 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/s2mpa01.txt create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/s2mpa01.txt b/Documentation/devicetree/bindings/mfd/s2mpa01.txt deleted file mode 100644 index c13d3d8c3947..000000000000 --- a/Documentation/devicetree/bindings/mfd/s2mpa01.txt +++ /dev/null @@ -1,90 +0,0 @@ - -* Samsung S2MPA01 Voltage and Current Regulator - -The Samsung S2MPA01 is a multi-function device which includes high -efficiency buck converters including Dual-Phase buck converter, various LDOs, -and an RTC. It is interfaced to the host controller using an I2C interface. -Each sub-block is addressed by the host system using different I2C slave -addresses. - -Required properties: -- compatible: Should be "samsung,s2mpa01-pmic". -- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66. - -Optional properties: -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the interrupts from s2mpa01 are delivered to. -- interrupts: An interrupt specifier for the sole interrupt generated by the - device. - -Optional nodes: -- regulators: The regulators of s2mpa01 that have to be instantiated should be - included in a sub-node named 'regulators'. Regulator nodes and constraints - included in this sub-node use the standard regulator bindings which are - documented elsewhere. - -Properties for BUCK regulator nodes: -- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500 - (default), 25000, or 50000. May be 0 for disabling the ramp delay on - BUCK{1,2,3,4}. - - In the absence of the regulator-ramp-delay property, the default ramp - delay will be used. - - NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set - for a particular group of BUCKs. So provide same regulator-ramp-delay=. - - The following BUCKs share ramp settings: - * 1 and 6 - * 2 and 4 - * 8, 9, and 10 - -The following are the names of the regulators that the s2mpa01 PMIC block -supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of s2mpa01. - - - LDOn - - valid values for n are 1 to 26 - - Example: LDO1, LD02, LDO26 - - BUCKn - - valid values for n are 1 to 10. - - Example: BUCK1, BUCK2, BUCK9 - -Example: - - s2mpa01_pmic@66 { - compatible = "samsung,s2mpa01-pmic"; - reg = <0x66>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_MMC2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt index 4aeb95c82304..cdd079bfc287 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt @@ -4,7 +4,7 @@ Binding for Samsung S2M and S5M family multi-function device This is a part of device tree bindings for S2M and S5M family multi-function devices. -The Samsung S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family +The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family of multi-function devices which include voltage and current regulators, RTC, charger controller, clock outputs and other sub-blocks. It is interfaced to the host controller using an I2C interface. Each sub-block is usually @@ -13,6 +13,7 @@ addressed by the host system using different I2C slave addresses. This document describes bindings for main device node. Optional sub-blocks must be a sub-nodes to it. Bindings for them can be found in: + - bindings/regulator/samsung,s2mpa01.txt - bindings/regulator/samsung,s2mps11.txt - bindings/regulator/samsung,s5m8767.txt - bindings/clock/samsung,s2mps11.txt @@ -20,6 +21,7 @@ must be a sub-nodes to it. Bindings for them can be found in: Required properties: - compatible: Should be one of the following + - "samsung,s2mpa01-pmic", - "samsung,s2mps11-pmic", - "samsung,s2mps13-pmic", - "samsung,s2mps14-pmic", diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt new file mode 100644 index 000000000000..bae3c7f838cf --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt @@ -0,0 +1,79 @@ +Binding for Samsung S2MPA01 regulator block +=========================================== + +This is a part of device tree bindings for S2M family multi-function devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S2MPA01 device provide buck and LDO regulators. + +To register these with regulator framework instantiate under main device node +a sub-node named "regulators" with more sub-nodes for each regulator using the +common regulator binding documented in: + - Documentation/devicetree/bindings/regulator/regulator.txt + + +Names of regulators supported by S2MPA01 device: + - LDOn + - valid values for n are 1 to 26 + - Example: LDO1, LD02, LDO26 + - BUCKn + - valid values for n are 1 to 10. + - Example: BUCK1, BUCK2, BUCK9 +Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of device. + + +Optional properties of buck regulator nodes under "regulators" sub-node: + - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500 + (default), 25000, or 50000. May be 0 for disabling the ramp delay on + BUCK{1,2,3,4}. + + In the absence of the regulator-ramp-delay property, the default ramp + delay will be used. + + Note: Some bucks share the ramp rate setting i.e. same ramp value + will be set for a particular group of bucks so provide the same + regulator-ramp-delay value for them. + Groups sharing ramp rate: + - buck{1,6}, + - buck{2,4}, + - buck{8,9,10}. + +Example: + + s2mpa01_pmic@66 { + compatible = "samsung,s2mpa01-pmic"; + reg = <0x66>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_MMC2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + }; + }; -- cgit v1.2.3 From 0b81995148f80f4fa0ce19e66d2e66abe82f456a Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 8 Jan 2016 11:29:42 +0000 Subject: mfd: arizona: Add device tree binding documentation for new clock driver Specify the device tree binding for the input clocks to Arizona devices. Signed-off-by: Charles Keepax Acked-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/arizona.txt | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 069e31da18f0..9b30011ecabe 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -51,6 +51,13 @@ Optional properties: - wlf,reset : GPIO specifier for the GPIO controlling /RESET + - clocks: Should reference the clocks supplied on MCLK1 and MCLK2 + - clock-names: Should contains two strings: + "mclk1" for the clock supplied on MCLK1, recommended to be a high + quality audio reference clock + "mclk2" for the clock supplied on MCLK2, recommended to be an always on + 32k clock + - wlf,gpio-defaults : A list of GPIO configuration register values. Defines for the appropriate values can found in . If absent, no configuration of these registers is performed. If any entry has -- cgit v1.2.3 From e8ecde25f5e08f89b61d86c32bbb56b405e90c32 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 14 Jan 2016 17:52:59 -0500 Subject: Make sure that highmem pages are not added to symlink page cache inode_nohighmem() is sufficient to make sure that page_get_link() won't try to allocate a highmem page. Moreover, it is sufficient to make sure that page_symlink/__page_symlink won't do the same thing. However, any filesystem that manually preseeds the symlink's page cache upon symlink(2) needs to make sure that the page it inserts there won't be a highmem one. Fortunately, only nfs and shmem have run afoul of that... Signed-off-by: Al Viro --- Documentation/filesystems/porting | 6 +++++- fs/nfs/dir.c | 5 ++--- mm/shmem.c | 2 +- 3 files changed, 8 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index 0f88e6020487..f1b87d8aa2da 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -508,7 +508,11 @@ in your dentry operations instead. [mandatory] any symlink that might use page_follow_link_light/page_put_link() must have inode_nohighmem(inode) called before anything might start playing with - its pagecache. + its pagecache. No highmem pages should end up in the pagecache of such + symlinks. That includes any preseeding that might be done during symlink + creation. __page_symlink() will honour the mapping gfp flags, so once + you've done inode_nohighmem() it's safe to use, but if you allocate and + insert the page manually, make sure to use the right gfp flags. -- [mandatory] ->follow_link() is replaced with ->get_link(); same API, except that diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index ce5a21861074..8a0530921685 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1894,15 +1894,14 @@ int nfs_symlink(struct inode *dir, struct dentry *dentry, const char *symname) attr.ia_mode = S_IFLNK | S_IRWXUGO; attr.ia_valid = ATTR_MODE; - page = alloc_page(GFP_HIGHUSER); + page = alloc_page(GFP_USER); if (!page) return -ENOMEM; - kaddr = kmap_atomic(page); + kaddr = page_address(page); memcpy(kaddr, symname, pathlen); if (pathlen < PAGE_SIZE) memset(kaddr + pathlen, 0, PAGE_SIZE - pathlen); - kunmap_atomic(kaddr); trace_nfs_symlink_enter(dir, dentry); error = NFS_PROTO(dir)->symlink(dir, dentry, page, pathlen, &attr); diff --git a/mm/shmem.c b/mm/shmem.c index 5813b7fa85b6..642471b0ddea 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2469,6 +2469,7 @@ static int shmem_symlink(struct inode *dir, struct dentry *dentry, const char *s inode->i_op = &shmem_short_symlink_operations; inode->i_link = info->symlink; } else { + inode_nohighmem(inode); error = shmem_getpage(inode, 0, &page, SGP_WRITE, NULL); if (error) { iput(inode); @@ -2476,7 +2477,6 @@ static int shmem_symlink(struct inode *dir, struct dentry *dentry, const char *s } inode->i_mapping->a_ops = &shmem_aops; inode->i_op = &shmem_symlink_inode_operations; - inode_nohighmem(inode); memcpy(page_address(page), symname, len); SetPageUptodate(page); set_page_dirty(page); -- cgit v1.2.3 From bf9683d6990589390b5178dafe8fd06808869293 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Thu, 14 Jan 2016 15:19:14 -0800 Subject: mm, documentation: clarify /proc/pid/status VmSwap limitations for shmem This series is based on Jerome Marchand's [1] so let me quote the first paragraph from there: There are several shortcomings with the accounting of shared memory (sysV shm, shared anonymous mapping, mapping to a tmpfs file). The values in /proc//status and statm don't allow to distinguish between shmem memory and a shared mapping to a regular file, even though their implications on memory usage are quite different: at reclaim, file mapping can be dropped or written back on disk while shmem needs a place in swap. As for shmem pages that are swapped-out or in swap cache, they aren't accounted at all. The original motivation for myself is that a customer found (IMHO rightfully) confusing that e.g. top output for process swap usage is unreliable with respect to swapped out shmem pages, which are not accounted for. The fundamental difference between private anonymous and shmem pages is that the latter has PTE's converted to pte_none, and not swapents. As such, they are not accounted to the number of swapents visible e.g. in /proc/pid/status VmSwap row. It might be theoretically possible to use swapents when swapping out shmem (without extra cost, as one has to change all mappers anyway), and on swap in only convert the swapent for the faulting process, leaving swapents in other processes until they also fault (so again no extra cost). But I don't know how many assumptions this would break, and it would be too disruptive change for a relatively small benefit. Instead, my approach is to document the limitation of VmSwap, and provide means to determine the swap usage for shmem areas for those who are interested and willing to pay the price, using /proc/pid/smaps. Because outside of ipcs, I don't think it's possible to currently to determine the usage at all. The previous patchset [1] did introduce new shmem-specific fields into smaps output, and functions to determine the values. I take a simpler approach, noting that smaps output already has a "Swap: X kB" line, where currently X == 0 always for shmem areas. I think we can just consider this a bug and provide the proper value by consulting the radix tree, as e.g. mincore_page() does. In the patch changelog I explain why this is also not perfect (and cannot be without swapents), but still arguably much better than showing a 0. The last two patches are adapted from Jerome's patchset and provide a VmRSS breakdown to RssAnon, RssFile and RssShm in /proc/pid/status. Hugh noted that this is a welcome addition, and I agree that it might help e.g. debugging process memory usage at albeit non-zero, but still rather low cost of extra per-mm counter and some page flag checks. [1] http://lwn.net/Articles/611966/ This patch (of 6): The documentation for /proc/pid/status does not mention that the value of VmSwap counts only swapped out anonymous private pages, and not swapped out pages of the underlying shmem objects (for shmem mappings). This is not obvious, so document this limitation. Signed-off-by: Vlastimil Babka Acked-by: Konstantin Khlebnikov Acked-by: Michal Hocko Acked-by: Jerome Marchand Acked-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 402ab99e409f..9f13b6e28676 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -238,7 +238,8 @@ Table 1-2: Contents of the status files (as of 4.1) VmLib size of shared library code VmPTE size of page table entries VmPMD size of second level page tables - VmSwap size of swap usage (the number of referred swapents) + VmSwap amount of swap used by anonymous private data + (shmem swap usage is not included) HugetlbPages size of hugetlb memory portions Threads number of threads SigQ number of signals queued/max. number for queue -- cgit v1.2.3 From c261e7d94f0dd33a34b6cf98686e8b9699b62340 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Thu, 14 Jan 2016 15:19:17 -0800 Subject: mm, proc: account for shmem swap in /proc/pid/smaps Currently, /proc/pid/smaps will always show "Swap: 0 kB" for shmem-backed mappings, even if the mapped portion does contain pages that were swapped out. This is because unlike private anonymous mappings, shmem does not change pte to swap entry, but pte_none when swapping the page out. In the smaps page walk, such page thus looks like it was never faulted in. This patch changes smaps_pte_entry() to determine the swap status for such pte_none entries for shmem mappings, similarly to how mincore_page() does it. Swapped out shmem pages are thus accounted for. For private mappings of tmpfs files that COWed some of the pages, swaped out status of the original shmem pages is naturally ignored. If some of the private copies was also swapped out, they are accounted via their page table swap entries, so the resulting reported swap usage is then a sum of both swapped out private copies, and swapped out shmem pages that were not COWed. No double accounting can thus happen. The accounting is arguably still not as precise as for private anonymous mappings, since now we will count also pages that the process in question never accessed, but another process populated them and then let them become swapped out. I believe it is still less confusing and subtle than not showing any swap usage by shmem mappings at all. Swapped out counter might of interest of users who would like to prevent from future swapins during performance critical operation and pre-fault them at their convenience. Especially for larger swapped out regions the cost of swapin is much higher than a fresh page allocation. So a differentiation between pte_none vs. swapped out is important for those usecases. One downside of this patch is that it makes /proc/pid/smaps more expensive for shmem mappings, as we consult the radix tree for each pte_none entry, so the overal complexity is O(n*log(n)). I have measured this on a process that creates a 2GB mapping and dirties single pages with a stride of 2MB, and time how long does it take to cat /proc/pid/smaps of this process 100 times. Private anonymous mapping: real 0m0.949s user 0m0.116s sys 0m0.348s Mapping of a /dev/shm/file: real 0m3.831s user 0m0.180s sys 0m3.212s The difference is rather substantial, so the next patch will reduce the cost for shared or read-only mappings. In a less controlled experiment, I've gathered pids of processes on my desktop that have either '/dev/shm/*' or 'SYSV*' in smaps. This included the Chrome browser and some KDE processes. Again, I've run cat /proc/pid/smaps on each 100 times. Before this patch: real 0m9.050s user 0m0.518s sys 0m8.066s After this patch: real 0m9.221s user 0m0.541s sys 0m8.187s This suggests low impact on average systems. Note that this patch doesn't attempt to adjust the SwapPss field for shmem mappings, which would need extra work to determine who else could have the pages mapped. Thus the value stays zero except for COWed swapped out pages in a shmem mapping, which are accounted as usual. Signed-off-by: Vlastimil Babka Acked-by: Konstantin Khlebnikov Acked-by: Jerome Marchand Acked-by: Michal Hocko Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 5 +++- fs/proc/task_mmu.c | 51 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 9f13b6e28676..fdeb5b33349f 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -460,7 +460,10 @@ and a page is modified, the file page is replaced by a private anonymous copy. hugetlbfs page which is *not* counted in "RSS" or "PSS" field for historical reasons. And these are not included in {Shared,Private}_{Clean,Dirty} field. "Swap" shows how much would-be-anonymous memory is also used, but out on swap. -"SwapPss" shows proportional swap share of this mapping. +For shmem mappings, "Swap" includes also the size of the mapped (and not +replaced by copy-on-write) part of the underlying shmem object out on swap. +"SwapPss" shows proportional swap share of this mapping. Unlike "Swap", this +does not take into account swapped out page of underlying shmem objects. "Locked" indicates whether the mapping is locked in memory or not. "VmFlags" field deserves a separate description. This member represents the kernel diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 187b3b5f242e..85ef60fdf2c0 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -451,6 +451,7 @@ struct mem_size_stats { unsigned long private_hugetlb; u64 pss; u64 swap_pss; + bool check_shmem_swap; }; static void smaps_account(struct mem_size_stats *mss, struct page *page, @@ -485,6 +486,45 @@ static void smaps_account(struct mem_size_stats *mss, struct page *page, } } +#ifdef CONFIG_SHMEM +static unsigned long smaps_shmem_swap(struct vm_area_struct *vma, + unsigned long addr) +{ + struct page *page; + + page = find_get_entry(vma->vm_file->f_mapping, + linear_page_index(vma, addr)); + if (!page) + return 0; + + if (radix_tree_exceptional_entry(page)) + return PAGE_SIZE; + + page_cache_release(page); + return 0; + +} + +static int smaps_pte_hole(unsigned long addr, unsigned long end, + struct mm_walk *walk) +{ + struct mem_size_stats *mss = walk->private; + + while (addr < end) { + mss->swap += smaps_shmem_swap(walk->vma, addr); + addr += PAGE_SIZE; + } + + return 0; +} +#else +static unsigned long smaps_shmem_swap(struct vm_area_struct *vma, + unsigned long addr) +{ + return 0; +} +#endif + static void smaps_pte_entry(pte_t *pte, unsigned long addr, struct mm_walk *walk) { @@ -512,6 +552,9 @@ static void smaps_pte_entry(pte_t *pte, unsigned long addr, } } else if (is_migration_entry(swpent)) page = migration_entry_to_page(swpent); + } else if (unlikely(IS_ENABLED(CONFIG_SHMEM) && mss->check_shmem_swap + && pte_none(*pte))) { + mss->swap += smaps_shmem_swap(vma, addr); } if (!page) @@ -671,6 +714,14 @@ static int show_smap(struct seq_file *m, void *v, int is_pid) }; memset(&mss, 0, sizeof mss); + +#ifdef CONFIG_SHMEM + if (vma->vm_file && shmem_mapping(vma->vm_file->f_mapping)) { + mss.check_shmem_swap = true; + smaps_walk.pte_hole = smaps_pte_hole; + } +#endif + /* mmap_sem is held in m_start */ walk_page_vma(vma, &smaps_walk); -- cgit v1.2.3 From 8cee852ec53fb530f10ccabf1596734209ae336b Mon Sep 17 00:00:00 2001 From: Jerome Marchand Date: Thu, 14 Jan 2016 15:19:29 -0800 Subject: mm, procfs: breakdown RSS for anon, shmem and file in /proc/pid/status There are several shortcomings with the accounting of shared memory (SysV shm, shared anonymous mapping, mapping of a tmpfs file). The values in /proc//status and <...>/statm don't allow to distinguish between shmem memory and a shared mapping to a regular file, even though theirs implication on memory usage are quite different: during reclaim, file mapping can be dropped or written back on disk, while shmem needs a place in swap. Also, to distinguish the memory occupied by anonymous and file mappings, one has to read the /proc/pid/statm file, which has a field for the file mappings (again, including shmem) and total memory occupied by these mappings (i.e. equivalent to VmRSS in the <...>/status file. Getting the value for anonymous mappings only is thus not exactly user-friendly (the statm file is intended to be rather efficiently machine-readable). To address both of these shortcomings, this patch adds a breakdown of VmRSS in /proc//status via new fields RssAnon, RssFile and RssShmem, making use of the previous preparatory patch. These fields tell the user the memory occupied by private anonymous pages, mapped regular files and shmem, respectively. Other existing fields in /status and /statm files are left without change. The /statm file can be extended in the future, if there's a need for that. Example (part of) /proc/pid/status output including the new Rss* fields: VmPeak: 2001008 kB VmSize: 2001004 kB VmLck: 0 kB VmPin: 0 kB VmHWM: 5108 kB VmRSS: 5108 kB RssAnon: 92 kB RssFile: 1324 kB RssShmem: 3692 kB VmData: 192 kB VmStk: 136 kB VmExe: 4 kB VmLib: 1784 kB VmPTE: 3928 kB VmPMD: 20 kB VmSwap: 0 kB HugetlbPages: 0 kB [vbabka@suse.cz: forward-porting, tweak changelog] Signed-off-by: Jerome Marchand Signed-off-by: Vlastimil Babka Acked-by: Konstantin Khlebnikov Acked-by: Michal Hocko Acked-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 13 +++++++++++-- fs/proc/task_mmu.c | 14 ++++++++++++-- 2 files changed, 23 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index fdeb5b33349f..ffcd49589ab5 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -169,6 +169,9 @@ read the file /proc/PID/status: VmLck: 0 kB VmHWM: 476 kB VmRSS: 476 kB + RssAnon: 352 kB + RssFile: 120 kB + RssShmem: 4 kB VmData: 156 kB VmStk: 88 kB VmExe: 68 kB @@ -231,7 +234,12 @@ Table 1-2: Contents of the status files (as of 4.1) VmSize total program size VmLck locked memory size VmHWM peak resident set size ("high water mark") - VmRSS size of memory portions + VmRSS size of memory portions. It contains the three + following parts (VmRSS = RssAnon + RssFile + RssShmem) + RssAnon size of resident anonymous memory + RssFile size of resident file mappings + RssShmem size of resident shmem memory (includes SysV shm, + mapping of tmpfs and shared anonymous mappings) VmData size of data, stack, and text segments VmStk size of data, stack, and text segments VmExe size of text segment @@ -266,7 +274,8 @@ Table 1-3: Contents of the statm files (as of 2.6.8-rc3) Field Content size total program size (pages) (same as VmSize in status) resident size of memory portions (pages) (same as VmRSS in status) - shared number of pages that are shared (i.e. backed by a file) + shared number of pages that are shared (i.e. backed by a file, same + as RssFile+RssShmem in status) trs number of pages that are 'code' (not including libs; broken, includes data segment) lrs number of pages of library (always 0 on 2.6) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 45eb24145978..18a30aedfa5d 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -23,9 +23,13 @@ void task_mem(struct seq_file *m, struct mm_struct *mm) { - unsigned long data, text, lib, swap, ptes, pmds; + unsigned long data, text, lib, swap, ptes, pmds, anon, file, shmem; unsigned long hiwater_vm, total_vm, hiwater_rss, total_rss; + anon = get_mm_counter(mm, MM_ANONPAGES); + file = get_mm_counter(mm, MM_FILEPAGES); + shmem = get_mm_counter(mm, MM_SHMEMPAGES); + /* * Note: to minimize their overhead, mm maintains hiwater_vm and * hiwater_rss only when about to *lower* total_vm or rss. Any @@ -36,7 +40,7 @@ void task_mem(struct seq_file *m, struct mm_struct *mm) hiwater_vm = total_vm = mm->total_vm; if (hiwater_vm < mm->hiwater_vm) hiwater_vm = mm->hiwater_vm; - hiwater_rss = total_rss = get_mm_rss(mm); + hiwater_rss = total_rss = anon + file + shmem; if (hiwater_rss < mm->hiwater_rss) hiwater_rss = mm->hiwater_rss; @@ -53,6 +57,9 @@ void task_mem(struct seq_file *m, struct mm_struct *mm) "VmPin:\t%8lu kB\n" "VmHWM:\t%8lu kB\n" "VmRSS:\t%8lu kB\n" + "RssAnon:\t%8lu kB\n" + "RssFile:\t%8lu kB\n" + "RssShmem:\t%8lu kB\n" "VmData:\t%8lu kB\n" "VmStk:\t%8lu kB\n" "VmExe:\t%8lu kB\n" @@ -66,6 +73,9 @@ void task_mem(struct seq_file *m, struct mm_struct *mm) mm->pinned_vm << (PAGE_SHIFT-10), hiwater_rss << (PAGE_SHIFT-10), total_rss << (PAGE_SHIFT-10), + anon << (PAGE_SHIFT-10), + file << (PAGE_SHIFT-10), + shmem << (PAGE_SHIFT-10), data << (PAGE_SHIFT-10), mm->stack_vm << (PAGE_SHIFT-10), text, lib, ptes >> 10, -- cgit v1.2.3 From d07e22597d1d355829b7b18ac19afa912cf758d1 Mon Sep 17 00:00:00 2001 From: Daniel Cashman Date: Thu, 14 Jan 2016 15:19:53 -0800 Subject: mm: mmap: add new /proc tunable for mmap_base ASLR Address Space Layout Randomization (ASLR) provides a barrier to exploitation of user-space processes in the presence of security vulnerabilities by making it more difficult to find desired code/data which could help an attack. This is done by adding a random offset to the location of regions in the process address space, with a greater range of potential offset values corresponding to better protection/a larger search-space for brute force, but also to greater potential for fragmentation. The offset added to the mmap_base address, which provides the basis for the majority of the mappings for a process, is set once on process exec in arch_pick_mmap_layout() and is done via hard-coded per-arch values, which reflect, hopefully, the best compromise for all systems. The trade-off between increased entropy in the offset value generation and the corresponding increased variability in address space fragmentation is not absolute, however, and some platforms may tolerate higher amounts of entropy. This patch introduces both new Kconfig values and a sysctl interface which may be used to change the amount of entropy used for offset generation on a system. The direct motivation for this change was in response to the libstagefright vulnerabilities that affected Android, specifically to information provided by Google's project zero at: http://googleprojectzero.blogspot.com/2015/09/stagefrightened.html The attack presented therein, by Google's project zero, specifically targeted the limited randomness used to generate the offset added to the mmap_base address in order to craft a brute-force-based attack. Concretely, the attack was against the mediaserver process, which was limited to respawning every 5 seconds, on an arm device. The hard-coded 8 bits used resulted in an average expected success rate of defeating the mmap ASLR after just over 10 minutes (128 tries at 5 seconds a piece). With this patch, and an accompanying increase in the entropy value to 16 bits, the same attack would take an average expected time of over 45 hours (32768 tries), which makes it both less feasible and more likely to be noticed. The introduced Kconfig and sysctl options are limited by per-arch minimum and maximum values, the minimum of which was chosen to match the current hard-coded value and the maximum of which was chosen so as to give the greatest flexibility without generating an invalid mmap_base address, generally a 3-4 bits less than the number of bits in the user-space accessible virtual address space. When decided whether or not to change the default value, a system developer should consider that mmap_base address could be placed anywhere up to 2^(value) bits away from the non-randomized location, which would introduce variable-sized areas above and below the mmap_base address such that the maximum vm_area_struct size may be reduced, preventing very large allocations. This patch (of 4): ASLR only uses as few as 8 bits to generate the random offset for the mmap base address on 32 bit architectures. This value was chosen to prevent a poorly chosen value from dividing the address space in such a way as to prevent large allocations. This may not be an issue on all platforms. Allow the specification of a minimum number of bits so that platforms desiring greater ASLR protection may determine where to place the trade-off. Signed-off-by: Daniel Cashman Cc: Russell King Acked-by: Kees Cook Cc: Ingo Molnar Cc: Jonathan Corbet Cc: Don Zickus Cc: Eric W. Biederman Cc: Heinrich Schuchardt Cc: Josh Poimboeuf Cc: Kirill A. Shutemov Cc: Naoya Horiguchi Cc: Andrea Arcangeli Cc: Mel Gorman Cc: Thomas Gleixner Cc: David Rientjes Cc: Mark Salyzyn Cc: Jeff Vander Stoep Cc: Nick Kralevich Cc: Catalin Marinas Cc: Will Deacon Cc: "H. Peter Anvin" Cc: Hector Marco-Gisbert Cc: Borislav Petkov Cc: Ralf Baechle Cc: Heiko Carstens Cc: Martin Schwidefsky Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/sysctl/vm.txt | 29 +++++++++++++++++++ arch/Kconfig | 68 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/mm.h | 11 ++++++++ kernel/sysctl.c | 22 +++++++++++++++ mm/mmap.c | 12 ++++++++ 5 files changed, 142 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index f72370b440b1..ee763f3d3b52 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -42,6 +42,8 @@ Currently, these files are in /proc/sys/vm: - min_slab_ratio - min_unmapped_ratio - mmap_min_addr +- mmap_rnd_bits +- mmap_rnd_compat_bits - nr_hugepages - nr_overcommit_hugepages - nr_trim_pages (only if CONFIG_MMU=n) @@ -485,6 +487,33 @@ against future potential kernel bugs. ============================================================== +mmap_rnd_bits: + +This value can be used to select the number of bits to use to +determine the random offset to the base address of vma regions +resulting from mmap allocations on architectures which support +tuning address space randomization. This value will be bounded +by the architecture's minimum and maximum supported values. + +This value can be changed after boot using the +/proc/sys/vm/mmap_rnd_bits tunable + +============================================================== + +mmap_rnd_compat_bits: + +This value can be used to select the number of bits to use to +determine the random offset to the base address of vma regions +resulting from mmap allocations for applications run in +compatibility mode on architectures which support tuning address +space randomization. This value will be bounded by the +architecture's minimum and maximum supported values. + +This value can be changed after boot using the +/proc/sys/vm/mmap_rnd_compat_bits tunable + +============================================================== + nr_hugepages Change the minimum size of the hugepage pool. diff --git a/arch/Kconfig b/arch/Kconfig index 4e949e58b192..ba1b626bca00 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -511,6 +511,74 @@ config ARCH_HAS_ELF_RANDOMIZE - arch_mmap_rnd() - arch_randomize_brk() +config HAVE_ARCH_MMAP_RND_BITS + bool + help + An arch should select this symbol if it supports setting a variable + number of bits for use in establishing the base address for mmap + allocations, has MMU enabled and provides values for both: + - ARCH_MMAP_RND_BITS_MIN + - ARCH_MMAP_RND_BITS_MAX + +config ARCH_MMAP_RND_BITS_MIN + int + +config ARCH_MMAP_RND_BITS_MAX + int + +config ARCH_MMAP_RND_BITS_DEFAULT + int + +config ARCH_MMAP_RND_BITS + int "Number of bits to use for ASLR of mmap base address" if EXPERT + range ARCH_MMAP_RND_BITS_MIN ARCH_MMAP_RND_BITS_MAX + default ARCH_MMAP_RND_BITS_DEFAULT if ARCH_MMAP_RND_BITS_DEFAULT + default ARCH_MMAP_RND_BITS_MIN + depends on HAVE_ARCH_MMAP_RND_BITS + help + This value can be used to select the number of bits to use to + determine the random offset to the base address of vma regions + resulting from mmap allocations. This value will be bounded + by the architecture's minimum and maximum supported values. + + This value can be changed after boot using the + /proc/sys/vm/mmap_rnd_bits tunable + +config HAVE_ARCH_MMAP_RND_COMPAT_BITS + bool + help + An arch should select this symbol if it supports running applications + in compatibility mode, supports setting a variable number of bits for + use in establishing the base address for mmap allocations, has MMU + enabled and provides values for both: + - ARCH_MMAP_RND_COMPAT_BITS_MIN + - ARCH_MMAP_RND_COMPAT_BITS_MAX + +config ARCH_MMAP_RND_COMPAT_BITS_MIN + int + +config ARCH_MMAP_RND_COMPAT_BITS_MAX + int + +config ARCH_MMAP_RND_COMPAT_BITS_DEFAULT + int + +config ARCH_MMAP_RND_COMPAT_BITS + int "Number of bits to use for ASLR of mmap base address for compatible applications" if EXPERT + range ARCH_MMAP_RND_COMPAT_BITS_MIN ARCH_MMAP_RND_COMPAT_BITS_MAX + default ARCH_MMAP_RND_COMPAT_BITS_DEFAULT if ARCH_MMAP_RND_COMPAT_BITS_DEFAULT + default ARCH_MMAP_RND_COMPAT_BITS_MIN + depends on HAVE_ARCH_MMAP_RND_COMPAT_BITS + help + This value can be used to select the number of bits to use to + determine the random offset to the base address of vma regions + resulting from mmap allocations for compatible applications This + value will be bounded by the architecture's minimum and maximum + supported values. + + This value can be changed after boot using the + /proc/sys/vm/mmap_rnd_compat_bits tunable + config HAVE_COPY_THREAD_TLS bool help diff --git a/include/linux/mm.h b/include/linux/mm.h index a8ab1fc0e9bc..d396753c0577 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -51,6 +51,17 @@ extern int sysctl_legacy_va_layout; #define sysctl_legacy_va_layout 0 #endif +#ifdef CONFIG_HAVE_ARCH_MMAP_RND_BITS +extern const int mmap_rnd_bits_min; +extern const int mmap_rnd_bits_max; +extern int mmap_rnd_bits __read_mostly; +#endif +#ifdef CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS +extern const int mmap_rnd_compat_bits_min; +extern const int mmap_rnd_compat_bits_max; +extern int mmap_rnd_compat_bits __read_mostly; +#endif + #include #include #include diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 5faf89ac9ec0..c810f8afdb7f 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1568,6 +1568,28 @@ static struct ctl_table vm_table[] = { .mode = 0644, .proc_handler = proc_doulongvec_minmax, }, +#ifdef CONFIG_HAVE_ARCH_MMAP_RND_BITS + { + .procname = "mmap_rnd_bits", + .data = &mmap_rnd_bits, + .maxlen = sizeof(mmap_rnd_bits), + .mode = 0600, + .proc_handler = proc_dointvec_minmax, + .extra1 = (void *)&mmap_rnd_bits_min, + .extra2 = (void *)&mmap_rnd_bits_max, + }, +#endif +#ifdef CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS + { + .procname = "mmap_rnd_compat_bits", + .data = &mmap_rnd_compat_bits, + .maxlen = sizeof(mmap_rnd_compat_bits), + .mode = 0600, + .proc_handler = proc_dointvec_minmax, + .extra1 = (void *)&mmap_rnd_compat_bits_min, + .extra2 = (void *)&mmap_rnd_compat_bits_max, + }, +#endif { } }; diff --git a/mm/mmap.c b/mm/mmap.c index c311bfd8005b..f32b84ad621a 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -58,6 +58,18 @@ #define arch_rebalance_pgtables(addr, len) (addr) #endif +#ifdef CONFIG_HAVE_ARCH_MMAP_RND_BITS +const int mmap_rnd_bits_min = CONFIG_ARCH_MMAP_RND_BITS_MIN; +const int mmap_rnd_bits_max = CONFIG_ARCH_MMAP_RND_BITS_MAX; +int mmap_rnd_bits __read_mostly = CONFIG_ARCH_MMAP_RND_BITS; +#endif +#ifdef CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS +const int mmap_rnd_compat_bits_min = CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN; +const int mmap_rnd_compat_bits_max = CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX; +int mmap_rnd_compat_bits __read_mostly = CONFIG_ARCH_MMAP_RND_COMPAT_BITS; +#endif + + static void unmap_region(struct mm_struct *mm, struct vm_area_struct *vma, struct vm_area_struct *prev, unsigned long start, unsigned long end); -- cgit v1.2.3 From f7e1cb6ec51b041335b5ad4dd7aefb37a56d79a6 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 14 Jan 2016 15:21:29 -0800 Subject: mm: memcontrol: account socket memory in unified hierarchy memory controller Socket memory can be a significant share of overall memory consumed by common workloads. In order to provide reasonable resource isolation in the unified hierarchy, this type of memory needs to be included in the tracking/accounting of a cgroup under active memory resource control. Overhead is only incurred when a non-root control group is created AND the memory controller is instructed to track and account the memory footprint of that group. cgroup.memory=nosocket can be specified on the boot commandline to override any runtime configuration and forcibly exclude socket memory from active memory resource control. Signed-off-by: Johannes Weiner Acked-by: David S. Miller Reviewed-by: Vladimir Davydov Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/kernel-parameters.txt | 4 ++ include/linux/memcontrol.h | 9 ++- mm/memcontrol.c | 122 +++++++++++++++++++++++++++++------- 3 files changed, 110 insertions(+), 25 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b7d44871effc..168fd79dc697 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -608,6 +608,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. cut the overhead, others just disable the usage. So only cgroup_disable=memory is actually worthy} + cgroup.memory= [KNL] Pass options to the cgroup memory controller. + Format: + nosocket -- Disable socket memory accounting. + checkreqprot [SELINUX] Set initial checkreqprot flag value. Format: { "0" | "1" } See security/selinux/Kconfig help text. diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 03090e8e7fff..a355f61a2ed3 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -170,6 +170,9 @@ struct mem_cgroup { unsigned long low; unsigned long high; + /* Range enforcement for interrupt charges */ + struct work_struct high_work; + unsigned long soft_limit; /* vmpressure notifications */ @@ -680,12 +683,16 @@ void sock_update_memcg(struct sock *sk); void sock_release_memcg(struct sock *sk); bool mem_cgroup_charge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages); void mem_cgroup_uncharge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages); -#if defined(CONFIG_MEMCG_KMEM) && defined(CONFIG_INET) +#if defined(CONFIG_MEMCG) && defined(CONFIG_INET) extern struct static_key memcg_sockets_enabled_key; #define mem_cgroup_sockets_enabled static_key_false(&memcg_sockets_enabled_key) static inline bool mem_cgroup_under_socket_pressure(struct mem_cgroup *memcg) { +#ifdef CONFIG_MEMCG_KMEM return memcg->tcp_mem.memory_pressure; +#else + return false; +#endif } #else #define mem_cgroup_sockets_enabled 0 diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 6aac8d2e31d7..60ebc486c2aa 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -80,6 +80,9 @@ struct mem_cgroup *root_mem_cgroup __read_mostly; #define MEM_CGROUP_RECLAIM_RETRIES 5 +/* Socket memory accounting disabled? */ +static bool cgroup_memory_nosocket; + /* Whether the swap controller is active */ #ifdef CONFIG_MEMCG_SWAP int do_swap_account __read_mostly; @@ -1945,6 +1948,26 @@ static int memcg_cpu_hotplug_callback(struct notifier_block *nb, return NOTIFY_OK; } +static void reclaim_high(struct mem_cgroup *memcg, + unsigned int nr_pages, + gfp_t gfp_mask) +{ + do { + if (page_counter_read(&memcg->memory) <= memcg->high) + continue; + mem_cgroup_events(memcg, MEMCG_HIGH, 1); + try_to_free_mem_cgroup_pages(memcg, nr_pages, gfp_mask, true); + } while ((memcg = parent_mem_cgroup(memcg))); +} + +static void high_work_func(struct work_struct *work) +{ + struct mem_cgroup *memcg; + + memcg = container_of(work, struct mem_cgroup, high_work); + reclaim_high(memcg, CHARGE_BATCH, GFP_KERNEL); +} + /* * Scheduled by try_charge() to be executed from the userland return path * and reclaims memory over the high limit. @@ -1952,20 +1975,13 @@ static int memcg_cpu_hotplug_callback(struct notifier_block *nb, void mem_cgroup_handle_over_high(void) { unsigned int nr_pages = current->memcg_nr_pages_over_high; - struct mem_cgroup *memcg, *pos; + struct mem_cgroup *memcg; if (likely(!nr_pages)) return; - pos = memcg = get_mem_cgroup_from_mm(current->mm); - - do { - if (page_counter_read(&pos->memory) <= pos->high) - continue; - mem_cgroup_events(pos, MEMCG_HIGH, 1); - try_to_free_mem_cgroup_pages(pos, nr_pages, GFP_KERNEL, true); - } while ((pos = parent_mem_cgroup(pos))); - + memcg = get_mem_cgroup_from_mm(current->mm); + reclaim_high(memcg, nr_pages, GFP_KERNEL); css_put(&memcg->css); current->memcg_nr_pages_over_high = 0; } @@ -2100,6 +2116,11 @@ done_restock: */ do { if (page_counter_read(&memcg->memory) > memcg->high) { + /* Don't bother a random interrupted task */ + if (in_interrupt()) { + schedule_work(&memcg->high_work); + break; + } current->memcg_nr_pages_over_high += batch; set_notify_resume(current); break; @@ -4150,6 +4171,8 @@ static void __mem_cgroup_free(struct mem_cgroup *memcg) { int node; + cancel_work_sync(&memcg->high_work); + mem_cgroup_remove_from_trees(memcg); for_each_node(node) @@ -4196,6 +4219,7 @@ mem_cgroup_css_alloc(struct cgroup_subsys_state *parent_css) page_counter_init(&memcg->kmem, NULL); } + INIT_WORK(&memcg->high_work, high_work_func); memcg->last_scanned_node = MAX_NUMNODES; INIT_LIST_HEAD(&memcg->oom_notify); memcg->move_charge_at_immigrate = 0; @@ -4267,6 +4291,11 @@ mem_cgroup_css_online(struct cgroup_subsys_state *css) if (ret) return ret; +#ifdef CONFIG_INET + if (cgroup_subsys_on_dfl(memory_cgrp_subsys) && !cgroup_memory_nosocket) + static_key_slow_inc(&memcg_sockets_enabled_key); +#endif + /* * Make sure the memcg is initialized: mem_cgroup_iter() * orders reading memcg->initialized against its callers @@ -4313,6 +4342,10 @@ static void mem_cgroup_css_free(struct cgroup_subsys_state *css) struct mem_cgroup *memcg = mem_cgroup_from_css(css); memcg_destroy_kmem(memcg); +#ifdef CONFIG_INET + if (cgroup_subsys_on_dfl(memory_cgrp_subsys) && !cgroup_memory_nosocket) + static_key_slow_dec(&memcg_sockets_enabled_key); +#endif __mem_cgroup_free(memcg); } @@ -5533,8 +5566,7 @@ void mem_cgroup_replace_page(struct page *oldpage, struct page *newpage) commit_charge(newpage, memcg, true); } -/* Writing them here to avoid exposing memcg's inner layout */ -#if defined(CONFIG_INET) && defined(CONFIG_MEMCG_KMEM) +#ifdef CONFIG_INET struct static_key memcg_sockets_enabled_key; EXPORT_SYMBOL(memcg_sockets_enabled_key); @@ -5559,10 +5591,15 @@ void sock_update_memcg(struct sock *sk) rcu_read_lock(); memcg = mem_cgroup_from_task(current); - if (memcg != root_mem_cgroup && - memcg->tcp_mem.active && - css_tryget_online(&memcg->css)) + if (memcg == root_mem_cgroup) + goto out; +#ifdef CONFIG_MEMCG_KMEM + if (!cgroup_subsys_on_dfl(memory_cgrp_subsys) && !memcg->tcp_mem.active) + goto out; +#endif + if (css_tryget_online(&memcg->css)) sk->sk_memcg = memcg; +out: rcu_read_unlock(); } EXPORT_SYMBOL(sock_update_memcg); @@ -5583,15 +5620,30 @@ void sock_release_memcg(struct sock *sk) */ bool mem_cgroup_charge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages) { - struct page_counter *counter; + gfp_t gfp_mask = GFP_KERNEL; - if (page_counter_try_charge(&memcg->tcp_mem.memory_allocated, - nr_pages, &counter)) { - memcg->tcp_mem.memory_pressure = 0; - return true; +#ifdef CONFIG_MEMCG_KMEM + if (!cgroup_subsys_on_dfl(memory_cgrp_subsys)) { + struct page_counter *counter; + + if (page_counter_try_charge(&memcg->tcp_mem.memory_allocated, + nr_pages, &counter)) { + memcg->tcp_mem.memory_pressure = 0; + return true; + } + page_counter_charge(&memcg->tcp_mem.memory_allocated, nr_pages); + memcg->tcp_mem.memory_pressure = 1; + return false; } - page_counter_charge(&memcg->tcp_mem.memory_allocated, nr_pages); - memcg->tcp_mem.memory_pressure = 1; +#endif + /* Don't block in the packet receive path */ + if (in_softirq()) + gfp_mask = GFP_NOWAIT; + + if (try_charge(memcg, gfp_mask, nr_pages) == 0) + return true; + + try_charge(memcg, gfp_mask|__GFP_NOFAIL, nr_pages); return false; } @@ -5602,10 +5654,32 @@ bool mem_cgroup_charge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages) */ void mem_cgroup_uncharge_skmem(struct mem_cgroup *memcg, unsigned int nr_pages) { - page_counter_uncharge(&memcg->tcp_mem.memory_allocated, nr_pages); +#ifdef CONFIG_MEMCG_KMEM + if (!cgroup_subsys_on_dfl(memory_cgrp_subsys)) { + page_counter_uncharge(&memcg->tcp_mem.memory_allocated, + nr_pages); + return; + } +#endif + page_counter_uncharge(&memcg->memory, nr_pages); + css_put_many(&memcg->css, nr_pages); } -#endif +#endif /* CONFIG_INET */ + +static int __init cgroup_memory(char *s) +{ + char *token; + + while ((token = strsep(&s, ",")) != NULL) { + if (!*token) + continue; + if (!strcmp(token, "nosocket")) + cgroup_memory_nosocket = true; + } + return 0; +} +__setup("cgroup.memory=", cgroup_memory); /* * subsys_initcall() for memory controller. -- cgit v1.2.3 From 0bc126d460453736c0e03d9da7ae0e9d4fcf86b3 Mon Sep 17 00:00:00 2001 From: Rodrigo Freire Date: Thu, 14 Jan 2016 15:21:58 -0800 Subject: Documentation/filesystems: describe the shared memory usage/accounting The Shared Memory accounting support is present in Kernel since commit 4b02108ac1b3 ("mm: oom analysis: add shmem vmstat") and in userland free(1) since 2014. This patch updates the Documentation to reflect this change. Signed-off-by: Rodrigo Freire Acked-by: Vlastimil Babka Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 2 ++ Documentation/filesystems/tmpfs.txt | 8 ++++---- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index ffcd49589ab5..e95aa1c6eadf 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -855,6 +855,7 @@ Dirty: 968 kB Writeback: 0 kB AnonPages: 861800 kB Mapped: 280372 kB +Shmem: 644 kB Slab: 284364 kB SReclaimable: 159856 kB SUnreclaim: 124508 kB @@ -911,6 +912,7 @@ MemAvailable: An estimate of how much memory is available for starting new AnonPages: Non-file backed pages mapped into userspace page tables AnonHugePages: Non-file backed huge pages mapped into userspace page tables Mapped: files which have been mmaped, such as libraries + Shmem: Total memory used by shared memory (shmem) and tmpfs Slab: in-kernel data structures cache SReclaimable: Part of Slab, that might be reclaimed, such as caches SUnreclaim: Part of Slab, that cannot be reclaimed on memory pressure diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt index 98ef55124158..d392e1505f17 100644 --- a/Documentation/filesystems/tmpfs.txt +++ b/Documentation/filesystems/tmpfs.txt @@ -17,10 +17,10 @@ RAM, where you have to create an ordinary filesystem on top. Ramdisks cannot swap and you do not have the possibility to resize them. Since tmpfs lives completely in the page cache and on swap, all tmpfs -pages currently in memory will show up as cached. It will not show up -as shared or something like that. Further on you can check the actual -RAM+swap use of a tmpfs instance with df(1) and du(1). - +pages will be shown as "Shmem" in /proc/meminfo and "Shared" in +free(1). Notice that these counters also include shared memory +(shmem, see ipcs(1)). The most reliable way to get the count is +using df(1) and du(1). tmpfs has the following uses: -- cgit v1.2.3 From b70ce2ab41cb67ab3d661eda078f7c4029bbca95 Mon Sep 17 00:00:00 2001 From: yankejian Date: Wed, 13 Jan 2016 15:09:58 +0800 Subject: dts: hisi: fixes no syscon fault when init mdio When linux start up, we get the log below: "Hi-HNS_MDIO 803c0000.mdio: no syscon hisilicon,peri-c-subctrl mdio_bus mdio@803c0000: mdio sys ctl reg has not maped" The source code about the subctrl is dealt syscon, but dts doesn't. It cause such fault, so this patch adds the syscon info on dts files to fixes it. Signed-off-by: Kejian Yan Acked-by: Rob Herring Signed-off-by: David S. Miller --- .../devicetree/bindings/arm/hisilicon/hisilicon.txt | 16 ++++++++++++++++ arch/arm64/boot/dts/hisilicon/hip05.dtsi | 5 +++++ arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi | 4 ++-- 3 files changed, 23 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index 6ac7c000af22..e3ccab114006 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -187,6 +187,22 @@ Example: reg = <0xb0000000 0x10000>; }; +Hisilicon HiP05 PERISUB system controller + +Required properties: +- compatible : "hisilicon,hip05-perisubc", "syscon"; +- reg : Register address and size + +The HiP05 PERISUB system controller is shared by peripheral controllers in +HiP05 Soc to implement some basic configurations. The peripheral +controllers include mdio, ddr, iic, uart, timer and so on. + +Example: + /* for HiP05 perisub-ctrl-c system */ + peri_c_subctrl: syscon@80000000 { + compatible = "hisilicon,hip05-perisubc", "syscon"; + reg = <0x0 0x80000000 0x0 0x10000>; + }; ----------------------------------------------------------------------- Hisilicon CPU controller diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi index 4ff16d016e34..c1ea999c7be1 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi @@ -246,6 +246,11 @@ clock-frequency = <200000000>; }; + peri_c_subctrl: syscon@80000000 { + compatible = "hisilicon,hip05-perisubc", "syscon"; + reg = < 0x0 0x80000000 0x0 0x10000>; + }; + uart0: uart@80300000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x80300000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi index 606dd5a05c2d..da7b6e613257 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi @@ -10,8 +10,8 @@ soc0: soc@000000000 { #address-cells = <1>; #size-cells = <0>; compatible = "hisilicon,hns-mdio"; - reg = <0x0 0x803c0000 0x0 0x10000 - 0x0 0x80000000 0x0 0x10000>; + reg = <0x0 0x803c0000 0x0 0x10000>; + subctrl-vbase = <&peri_c_subctrl>; soc0_phy0: ethernet-phy@0 { reg = <0x0>; -- cgit v1.2.3