From 1f164bd5b7dd4a1903c274ca70bf1ab11684db99 Mon Sep 17 00:00:00 2001 From: zhangqing Date: Mon, 11 Jan 2016 02:36:40 -0800 Subject: dt-bindings: modify document of Rockchip power domains Modify binding documentation for the power domains found on Rockchip RK3368 SoCs. Signed-off-by: zhangqing Acked-by: Rob Herring Signed-off-by: Heiko Stuebner --- .../bindings/soc/rockchip/power_domain.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt index 112756e11802..13dc6a3fdb4a 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt @@ -6,6 +6,7 @@ powered up/down by software based on different application scenes to save power. Required properties for power domain controller: - compatible: Should be one of the following. "rockchip,rk3288-power-controller" - for RK3288 SoCs. + "rockchip,rk3368-power-controller" - for RK3368 SoCs. - #power-domain-cells: Number of cells in a power-domain specifier. Should be 1 for multiple PM domains. - #address-cells: Should be 1. @@ -14,6 +15,7 @@ Required properties for power domain controller: Required properties for power domain sub nodes: - reg: index of the power domain, should use macros in: "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain. + "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain. - clocks (optional): phandles to clocks which need to be enabled while power domain switches state. @@ -31,11 +33,24 @@ Example: }; }; + power: power-controller { + compatible = "rockchip,rk3368-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pd_gpu_1 { + reg = ; + clocks = <&cru ACLK_GPU_CFG>; + }; + }; + Node of a device using power domains must have a power-domains property, containing a phandle to the power device node and an index specifying which power domain to use. The index should use macros in: "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain. + "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain. Example of the node using power domain: @@ -44,3 +59,9 @@ Example of the node using power domain: power-domains = <&power RK3288_PD_GPU>; /* ... */ }; + + node { + /* ... */ + power-domains = <&power RK3368_PD_GPU_1>; + /* ... */ + }; -- cgit v1.2.3 From 8859b90162bc4fb0c515f92c28ad126173188156 Mon Sep 17 00:00:00 2001 From: Damien Horsley Date: Mon, 18 Jan 2016 13:12:37 +0000 Subject: reset: img: Add pistachio reset controller binding document Add binding document for the Pistachio SoC reset controller Signed-off-by: Damien Horsley Signed-off-by: James Hartley Signed-off-by: Philipp Zabel --- .../bindings/reset/img,pistachio-reset.txt | 55 ++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/img,pistachio-reset.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt b/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt new file mode 100644 index 000000000000..8c05d16367df --- /dev/null +++ b/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt @@ -0,0 +1,55 @@ +Pistachio Reset Controller +============================================================================= + +This binding describes a reset controller device that is used to enable and +disable individual IP blocks within the Pistachio SoC using "soft reset" +control bits found in the Pistachio SoC top level registers. + +The actual action taken when soft reset is asserted is hardware dependent. +However, when asserted it may not be possible to access the hardware's +registers, and following an assert/deassert sequence the hardware's previous +state may no longer be valid. + +Please refer to Documentation/devicetree/bindings/reset/reset.txt +for common reset controller binding usage. + +Required properties: + +- compatible: Contains "img,pistachio-reset" + +- #reset-cells: Contains 1 + +Example: + + cr_periph: clk@18148000 { + compatible = "img,pistachio-cr-periph", "syscon", "simple-mfd"; + reg = <0x18148000 0x1000>; + clocks = <&clk_periph PERIPH_CLK_SYS>; + clock-names = "sys"; + #clock-cells = <1>; + + pistachio_reset: reset-controller { + compatible = "img,pistachio-reset"; + #reset-cells = <1>; + }; + }; + +Specifying reset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the pistachio reset device node and an +index specifying which reset to use, as described in +Documentation/devicetree/bindings/reset/reset.txt. + +Example: + + spdif_out: spdif-out@18100d00 { + ... + resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>; + reset-names = "rst"; + ... + }; + +Macro definitions for the supported resets can be found in: +include/dt-bindings/reset/pistachio-resets.h -- cgit v1.2.3 From e116c0545d17be6cc95a559aa5a68c221330501b Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 28 Dec 2015 14:39:21 +0100 Subject: dt-bindings: bus: ti-gpmc: Add AAD timings properties In order to support advanced AAD timings, add these properties to the DT GPMC bindings. Signed-off-by: Neil Armstrong Acked-by: Tony Lindgren Acked-by: Rob Herring Signed-off-by: Roger Quadros --- Documentation/devicetree/bindings/bus/ti-gpmc.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt b/Documentation/devicetree/bindings/bus/ti-gpmc.txt index 704be9306c9f..01683707060b 100644 --- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt +++ b/Documentation/devicetree/bindings/bus/ti-gpmc.txt @@ -46,6 +46,9 @@ Timing properties for child nodes. All are optional and default to 0. - gpmc,adv-on-ns: Assertion time - gpmc,adv-rd-off-ns: Read deassertion time - gpmc,adv-wr-off-ns: Write deassertion time + - gpmc,adv-aad-mux-on-ns: Assertion time for AAD + - gpmc,adv-aad-mux-rd-off-ns: Read deassertion time for AAD + - gpmc,adv-aad-mux-wr-off-ns: Write deassertion time for AAD WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: - gpmc,we-on-ns Assertion time @@ -54,6 +57,8 @@ Timing properties for child nodes. All are optional and default to 0. OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: - gpmc,oe-on-ns: Assertion time - gpmc,oe-off-ns: Deassertion time + - gpmc,oe-aad-mux-on-ns: Assertion time for AAD + - gpmc,oe-aad-mux-off-ns: Deassertion time for AAD Access time and cycle time timings (in nanoseconds) corresponding to GPMC_CONFIG5: -- cgit v1.2.3