From de9b1214c04f45949c9f692e447328a1058a41ac Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Wed, 25 May 2016 12:38:34 -0700 Subject: ASoC: cs53l30: Add codec driver support for Cirrus CS53L30 CS53L30 is a Quad-Channel ADC from Cirrus Logic with an I2S/TDM DAI. So this patch adds a codec driver for CS53L30 that includes 4-channel 24-bit recording and TDM mode supports. Signed-off-by: Nicolin Chen Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/cs53l30.txt | 40 ++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cs53l30.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/cs53l30.txt b/Documentation/devicetree/bindings/sound/cs53l30.txt new file mode 100644 index 000000000000..18d6b99e0a2d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs53l30.txt @@ -0,0 +1,40 @@ +CS53L30 audio CODEC + +Required properties: + + - compatible : "cirrus,cs53l30" + + - reg : the I2C address of the device + + - VA-supply, VP-supply : power supplies for the device, + as covered in Documentation/devicetree/bindings/regulator/regulator.txt. + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. + + - cirrus,micbias-lvl : Set the output voltage level on the MICBIAS Pin. + 0 = Hi-Z + 1 = 1.80 V + 2 = 2.75 V + + - cirrus,use-sdout2 : This is a boolean property. If present, it indicates + the hardware design connects both SDOUT1 and SDOUT2 + pins to output data. Otherwise, it indicates that + only SDOUT1 is connected for data output. + * CS53l30 supports 4-channel data output in the same + * frame using two different ways: + * 1) Normal I2S mode on two data pins -- each SDOUT + * carries 2-channel data in the same time. + * 2) TDM mode on one signle data pin -- SDOUT1 carries + * 4-channel data per frame. + +Example: + +codec: cs53l30@48 { + compatible = "cirrus,cs53l30"; + reg = <0x48>; + reset-gpios = <&gpio 54 0>; + VA-supply = <&cs53l30_va>; + VP-supply = <&cs53l30_vp>; +}; -- cgit v1.2.3 From 36e5ecc2986f4712d8fdfc05ed1e5d39dda7096d Mon Sep 17 00:00:00 2001 From: Simran Rai Date: Tue, 17 May 2016 17:01:07 -0700 Subject: ASoC: cygnus: Add DT bindings for Broadcom Cygnus audio Add bindings for audio driver in Broadcom Cygnus. Signed-off-by: Lori Hikichi Signed-off-by: Simran Rai Reviewed-by: Ray Jui Reviewed-by: Scott Branden Acked-by: Rob Herring Signed-off-by: Mark Brown --- .../bindings/sound/brcm,cygnus-audio.txt | 67 ++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt new file mode 100644 index 000000000000..b139e66d2a11 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt @@ -0,0 +1,67 @@ +BROADCOM Cygnus Audio I2S/TDM/SPDIF controller + +Required properties: + - compatible : "brcm,cygnus-audio" + - #address-cells: 32bit valued, 1 cell. + - #size-cells: 32bit valued, 0 cell. + - reg : Should contain audio registers location and length + - reg-names: names of the registers listed in "reg" property + Valid names are "aud" and "i2s_in". "aud" contains a + set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains + a set of I2S_IN registers. + - clocks: PLL and leaf clocks used by audio ports + - assigned-clocks: PLL and leaf clocks + - assigned-clock-parents: parent clocks of the assigned clocks + (usually the PLL) + - assigned-clock-rates: List of clock frequencies of the + assigned clocks + - clock-names: names of 3 leaf clocks used by audio ports + Valid names are "ch0_audio", "ch1_audio", "ch2_audio" + - interrupts: audio DMA interrupt number + +SSP Subnode properties: +- reg: The index of ssp port interface to use + Valid value are 0, 1, 2, or 3 (for spdif) + +Example: + cygnus_audio: audio@180ae000 { + compatible = "brcm,cygnus-audio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>; + reg-names = "aud", "i2s_in"; + clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>; + assigned-clocks = <&audiopll BCM_CYGNUS_AUDIOPLL>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH1>, + <&audiopll BCM_CYGNUS_AUDIOPLL_CH2>; + assigned-clock-parents = <&audiopll BCM_CYGNUS_AUDIOPLL>; + assigned-clock-rates = <1769470191>, + <0>, + <0>, + <0>; + clock-names = "ch0_audio", "ch1_audio", "ch2_audio"; + interrupts = ; + + ssp0: ssp_port@0 { + reg = <0>; + status = "okay"; + }; + + ssp1: ssp_port@1 { + reg = <1>; + status = "disabled"; + }; + + ssp2: ssp_port@2 { + reg = <2>; + status = "disabled"; + }; + + spdif: spdif_port@3 { + reg = <3>; + status = "disabled"; + }; + }; -- cgit v1.2.3 From 05f33bc5d6df03426e631cea5d1a8568d43ab07f Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Tue, 21 Jun 2016 16:50:13 -0700 Subject: ASoC: cs53l30: Add MUTE pin control support via GPIO The codec chip has a physical MUTE pin to let users control it via GPIO. So this patch add a mute control support to the driver. Signed-off-by: Nicolin Chen Acked-by: Paul Handrigan Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/cs53l30.txt | 4 +++ sound/soc/codecs/cs53l30.c | 30 ++++++++++++++++++++++ sound/soc/codecs/cs53l30.h | 1 + 3 files changed, 35 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/sound/cs53l30.txt b/Documentation/devicetree/bindings/sound/cs53l30.txt index 18d6b99e0a2d..4dbfb8274cd9 100644 --- a/Documentation/devicetree/bindings/sound/cs53l30.txt +++ b/Documentation/devicetree/bindings/sound/cs53l30.txt @@ -13,6 +13,10 @@ Optional properties: - reset-gpios : a GPIO spec for the reset pin. + - mute-gpios : a GPIO spec for the MUTE pin. The active state can be either + GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW, which would be handled + by the driver automatically. + - cirrus,micbias-lvl : Set the output voltage level on the MICBIAS Pin. 0 = Hi-Z 1 = 1.80 V diff --git a/sound/soc/codecs/cs53l30.c b/sound/soc/codecs/cs53l30.c index b0a64a19a045..5988b5c672fe 100644 --- a/sound/soc/codecs/cs53l30.c +++ b/sound/soc/codecs/cs53l30.c @@ -35,6 +35,7 @@ struct cs53l30_private { struct regulator_bulk_data supplies[CS53L30_NUM_SUPPLIES]; struct regmap *regmap; struct gpio_desc *reset_gpio; + struct gpio_desc *mute_gpio; struct clk *mclk; bool use_sdout2; u32 mclk_rate; @@ -833,6 +834,16 @@ static int cs53l30_set_dai_tdm_slot(struct snd_soc_dai *dai, return 0; } +static int cs53l30_mute_stream(struct snd_soc_dai *dai, int mute, int stream) +{ + struct cs53l30_private *priv = snd_soc_codec_get_drvdata(dai->codec); + + if (priv->mute_gpio) + gpiod_set_value_cansleep(priv->mute_gpio, mute); + + return 0; +} + /* SNDRV_PCM_RATE_KNOT -> 12000, 24000 Hz, limit with constraint list */ #define CS53L30_RATES (SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_KNOT) @@ -846,6 +857,7 @@ static const struct snd_soc_dai_ops cs53l30_ops = { .set_sysclk = cs53l30_set_sysclk, .set_tristate = cs53l30_set_tristate, .set_tdm_slot = cs53l30_set_dai_tdm_slot, + .mute_stream = cs53l30_mute_stream, }; static struct snd_soc_dai_driver cs53l30_dai = { @@ -991,6 +1003,24 @@ static int cs53l30_i2c_probe(struct i2c_client *client, cs53l30->mclk = NULL; } + /* Fetch the MUTE control */ + cs53l30->mute_gpio = devm_gpiod_get_optional(dev, "mute", + GPIOD_OUT_HIGH); + if (IS_ERR(cs53l30->mute_gpio)) { + ret = PTR_ERR(cs53l30->mute_gpio); + goto error; + } + + if (cs53l30->mute_gpio) { + /* Enable MUTE controls via MUTE pin */ + regmap_write(cs53l30->regmap, CS53L30_MUTEP_CTL1, + CS53L30_MUTEP_CTL1_MUTEALL); + /* Flip the polarity of MUTE pin */ + if (gpiod_is_active_low(cs53l30->mute_gpio)) + regmap_update_bits(cs53l30->regmap, CS53L30_MUTEP_CTL2, + CS53L30_MUTE_PIN_POLARITY, 0); + } + if (!of_property_read_u8(np, "cirrus,micbias-lvl", &val)) regmap_update_bits(cs53l30->regmap, CS53L30_MICBIAS_CTL, CS53L30_MIC_BIAS_CTRL_MASK, val); diff --git a/sound/soc/codecs/cs53l30.h b/sound/soc/codecs/cs53l30.h index 0dd4afbb5c64..5e39da568749 100644 --- a/sound/soc/codecs/cs53l30.h +++ b/sound/soc/codecs/cs53l30.h @@ -253,6 +253,7 @@ #define CS53L30_MUTE_MB_ALL_PDN_MASK (1 << CS53L30_MUTE_MB_ALL_PDN_SHIFT) #define CS53L30_MUTE_MB_ALL_PDN (1 << CS53L30_MUTE_MB_ALL_PDN_SHIFT) +#define CS53L30_MUTEP_CTL1_MUTEALL (0xdf) #define CS53L30_MUTEP_CTL1_DEFAULT (0) /* R32 (0x20) CS53L30_MUTEP_CTL2 - MUTE Pin Control 2 */ -- cgit v1.2.3