From 7b9e111a5216640c86c206e6b419a0f4908c202b Mon Sep 17 00:00:00 2001 From: Macpaul Lin Date: Fri, 21 Feb 2020 17:52:18 +0800 Subject: dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC This patch adds the binding documentation for apmixedsys, audsys, camsys, imgsys, infracfg, mmsys, pericfg, topckgen Signed-off-by: Mars Cheng Signed-off-by: Owen Chen Signed-off-by: Macpaul Lin Acked-by: Rob Herring Link: https://lore.kernel.org/r/1582278742-1626-2-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Stephen Boyd --- Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt | 1 + Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt | 1 + Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt | 1 + Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt | 1 + Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt | 1 + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt | 1 + Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt | 1 + Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt | 1 + 8 files changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index ff000ccade78..bd7a0fa5801b 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-apmixedsys" - "mediatek,mt2712-apmixedsys", "syscon" + - "mediatek,mt6765-apmixedsys", "syscon" - "mediatek,mt6779-apmixedsys", "syscon" - "mediatek,mt6797-apmixedsys" - "mediatek,mt7622-apmixedsys" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt index e4ca7b703123..38309db115f5 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-audsys", "syscon" + - "mediatek,mt6765-audsys", "syscon" - "mediatek,mt6779-audio", "syscon" - "mediatek,mt7622-audsys", "syscon" - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt index 1f4aaa15a37e..a0ce82085ad0 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt @@ -6,6 +6,7 @@ The MediaTek camsys controller provides various clocks to the system. Required Properties: - compatible: Should be one of: + - "mediatek,mt6765-camsys", "syscon" - "mediatek,mt6779-camsys", "syscon" - "mediatek,mt8183-camsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt index 2b693e343c56..1e1f00718a7d 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-imgsys", "syscon" - "mediatek,mt2712-imgsys", "syscon" + - "mediatek,mt6765-imgsys", "syscon" - "mediatek,mt6779-imgsys", "syscon" - "mediatek,mt6797-imgsys", "syscon" - "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index db2f4fd754e7..49a968be1a80 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -9,6 +9,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-infracfg", "syscon" - "mediatek,mt2712-infracfg", "syscon" + - "mediatek,mt6765-infracfg", "syscon" - "mediatek,mt6779-infracfg_ao", "syscon" - "mediatek,mt6797-infracfg", "syscon" - "mediatek,mt7622-infracfg", "syscon" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 301eefbe1618..4a712509bec2 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-mmsys", "syscon" - "mediatek,mt2712-mmsys", "syscon" + - "mediatek,mt6765-mmsys", "syscon" - "mediatek,mt6779-mmsys", "syscon" - "mediatek,mt6797-mmsys", "syscon" - "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt index ecf027a9003a..dcbd414c7fd7 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -9,6 +9,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-pericfg", "syscon" - "mediatek,mt2712-pericfg", "syscon" + - "mediatek,mt6765-pericfg", "syscon" - "mediatek,mt7622-pericfg", "syscon" - "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon" - "mediatek,mt7629-pericfg", "syscon" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index 0293d693ce0c..9b0394cbbdc9 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-topckgen" - "mediatek,mt2712-topckgen", "syscon" + - "mediatek,mt6765-topckgen", "syscon" - "mediatek,mt6779-topckgen", "syscon" - "mediatek,mt6797-topckgen" - "mediatek,mt7622-topckgen" -- cgit v1.2.3 From 626b134b58eb03c152cdba0a94c74ca3da0805e7 Mon Sep 17 00:00:00 2001 From: Macpaul Lin Date: Fri, 21 Feb 2020 17:52:19 +0800 Subject: dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC This patch adds the binding documentation for mipi0a. Signed-off-by: Mars Cheng Signed-off-by: Owen Chen Signed-off-by: Macpaul Lin Link: https://lore.kernel.org/r/1582278742-1626-3-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Stephen Boyd --- .../bindings/arm/mediatek/mediatek,mipi0a.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt new file mode 100644 index 000000000000..8be5978f388d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt @@ -0,0 +1,28 @@ +Mediatek mipi0a (mipi_rx_ana_csi0a) controller +============================ + +The Mediatek mipi0a controller provides various clocks +to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt6765-mipi0a", "syscon" +- #clock-cells: Must be 1 + +The mipi0a controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +The mipi0a controller also uses the common power domain from +Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +The available power doamins are defined in dt-bindings/power/mt*-power.h. + +Example: + +mipi0a: clock-controller@11c10000 { + compatible = "mediatek,mt6765-mipi0a", "syscon"; + reg = <0 0x11c10000 0 0x1000>; + power-domains = <&scpsys MT6765_POWER_DOMAIN_CAM>; + #clock-cells = <1>; +}; -- cgit v1.2.3 From 0502f26c6441d82cf7299678198b644f3838e871 Mon Sep 17 00:00:00 2001 From: Macpaul Lin Date: Fri, 21 Feb 2020 17:52:20 +0800 Subject: dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC This patch adds the binding documentation for vcodecsys. Signed-off-by: Mars Cheng Signed-off-by: Owen Chen Signed-off-by: Macpaul Lin Link: https://lore.kernel.org/r/1582278742-1626-4-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Stephen Boyd --- .../bindings/arm/mediatek/mediatek,vcodecsys.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt new file mode 100644 index 000000000000..c877bcc1a5c5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt @@ -0,0 +1,27 @@ +Mediatek vcodecsys controller +============================ + +The Mediatek vcodecsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt6765-vcodecsys", "syscon" +- #clock-cells: Must be 1 + +The vcodecsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +The vcodecsys controller also uses the common power domain from +Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +The available power doamins are defined in dt-bindings/power/mt*-power.h. + +Example: + +venc_gcon: clock-controller@17000000 { + compatible = "mediatek,mt6765-vcodecsys", "syscon"; + reg = <0 0x17000000 0 0x10000>; + power-domains = <&scpsys MT6765_POWER_DOMAIN_VCODEC>; + #clock-cells = <1>; +}; -- cgit v1.2.3 From aec6adc560a0fa090659f23f7501e77d18306b84 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Wed, 27 May 2020 01:20:53 +0300 Subject: dt-bindings: clk: Add Baikal-T1 CCU PLLs binding Baikal-T1 Clocks Control Unit is responsible for transformation of a signal coming from an external oscillator into clocks of various frequencies to propagate them then to the corresponding clocks consumers (either individual IP-blocks or clock domains). In order to create a set of high-frequency clocks the external signal is firstly handled by the embedded into CCU PLLs. So the corresponding dts-node is just a normal clock-provider node with standard set of properties. Note as being part of the Baikal-T1 System Controller its DT node is supposed to be a child the system controller node. Signed-off-by: Serge Semin Cc: Alexey Malahov Cc: Arnd Bergmann Cc: linux-mips@vger.kernel.org Link: https://lore.kernel.org/r/20200526222056.18072-2-Sergey.Semin@baikalelectronics.ru Reviewed-by: Rob Herring Signed-off-by: Stephen Boyd --- .../bindings/clock/baikal,bt1-ccu-pll.yaml | 131 +++++++++++++++++++++ include/dt-bindings/clock/bt1-ccu.h | 16 +++ 2 files changed, 147 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml create mode 100644 include/dt-bindings/clock/bt1-ccu.h (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml new file mode 100644 index 000000000000..97131bfa6f87 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 Clock Control Unit PLL + +maintainers: + - Serge Semin + +description: | + Clocks Control Unit is the core of Baikal-T1 SoC System Controller + responsible for the chip subsystems clocking and resetting. The CCU is + connected with an external fixed rate oscillator, which signal is transformed + into clocks of various frequencies and then propagated to either individual + IP-blocks or to groups of blocks (clock domains). The transformation is done + by means of PLLs and gateable/non-gateable dividers embedded into the CCU. + It's logically divided into the next components: + 1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but + in general can provide any frequency supported by the CCU PLLs). + 2) PLLs clocks generators (PLLs) - described in this binding file. + 3) AXI-bus clock dividers (AXI). + 4) System devices reference clock dividers (SYS). + which are connected with each other as shown on the next figure: + + +---------------+ + | Baikal-T1 CCU | + | +----+------|- MIPS P5600 cores + | +-|PLLs|------|- DDR controller + | | +----+ | + +----+ | | | | | + |XTAL|--|-+ | | +---+-| + +----+ | | | +-|AXI|-|- AXI-bus + | | | +---+-| + | | | | + | | +----+---+-|- APB-bus + | +-------|SYS|-|- Low-speed Devices + | +---+-|- High-speed Devices + +---------------+ + + Each CCU sub-block is represented as a separate dts-node and has an + individual driver to be bound with. + + In order to create signals of wide range frequencies the external oscillator + output is primarily connected to a set of CCU PLLs. There are five PLLs + to create a clock for the MIPS P5600 cores, the embedded DDR controller, + SATA, Ethernet and PCIe domains. The last three domains though named by the + biggest system interfaces in fact include nearly all of the rest SoC + peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM core + with an interface wrapper (so called safe PLL' clocks switcher) to simplify + the PLL configuration procedure. The PLLs work as depicted on the next + diagram: + + +--------------------------+ + | | + +-->+---+ +---+ +---+ | +---+ 0|\ + CLKF--->|/NF|--->|PFD|...|VCO|-+->|/OD|--->| | + +---+ +->+---+ +---+ /->+---+ | |--->CLKOUT + CLKOD---------C----------------+ 1| | + +--------C--------------------------->|/ + | | ^ + Rclk-+->+---+ | | + CLKR--->|/NR|-+ | + +---+ | + BYPASS--------------------------------------+ + BWADJ---> + + where Rclk is the reference clock coming from XTAL, NR - reference clock + divider, NF - PLL clock multiplier, OD - VCO output clock divider, CLKOUT - + output clock, BWADJ is the PLL bandwidth adjustment parameter. At this moment + the binding supports the PLL dividers configuration in accordance with a + requested rate, while bypassing and bandwidth adjustment settings can be + added in future if it gets to be necessary. + + The PLLs CLKOUT is then either directly connected with the corresponding + clocks consumer (like P5600 cores or DDR controller) or passed over a CCU + divider to create a signal required for the clock domain. + + The CCU PLL dts-node uses the common clock bindings with no custom + parameters. The list of exported clocks can be found in + 'include/dt-bindings/clock/bt1-ccu.h'. Since CCU PLL is a part of the + Baikal-T1 SoC System Controller its DT node is supposed to be a child of + later one. + +properties: + compatible: + const: baikal,bt1-ccu-pll + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + description: External reference clock + maxItems: 1 + + clock-names: + const: ref_clk + +unevaluatedProperties: false + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + +examples: + # Clock Control Unit PLL node: + - | + clock-controller@1f04d000 { + compatible = "baikal,bt1-ccu-pll"; + reg = <0x1f04d000 0x028>; + #clock-cells = <1>; + + clocks = <&clk25m>; + clock-names = "ref_clk"; + }; + # Required external oscillator: + - | + clk25m: clock-oscillator-25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "clk25m"; + }; +... diff --git a/include/dt-bindings/clock/bt1-ccu.h b/include/dt-bindings/clock/bt1-ccu.h new file mode 100644 index 000000000000..931a4bea67c0 --- /dev/null +++ b/include/dt-bindings/clock/bt1-ccu.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC + * + * Baikal-T1 CCU clock indices + */ +#ifndef __DT_BINDINGS_CLOCK_BT1_CCU_H +#define __DT_BINDINGS_CLOCK_BT1_CCU_H + +#define CCU_CPU_PLL 0 +#define CCU_SATA_PLL 1 +#define CCU_DDR_PLL 2 +#define CCU_PCIE_PLL 3 +#define CCU_ETH_PLL 4 + +#endif /* __DT_BINDINGS_CLOCK_BT1_CCU_H */ -- cgit v1.2.3 From 11ea09b9e2ed0d9680a890f8fffa204dcb1a2654 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Wed, 27 May 2020 01:20:54 +0300 Subject: dt-bindings: clk: Add Baikal-T1 CCU Dividers binding After being gained by the CCU PLLs the signals must be transformed to be suitable for the clock-consumers. This is done by a set of dividers embedded into the CCU. A first block of dividers is used to create reference clocks for AXI-bus of high-speed peripheral IP-cores of the chip. The second block dividers alter the PLLs output signals to be then consumed by SoC peripheral devices. Both block DT nodes are ordinary clock-providers with standard set of properties supported. But in addition to that each clock provider can be used to reset the corresponding clock domain. This makes the AXI-bus and System Devices CCU DT nodes to be also reset-providers. Signed-off-by: Serge Semin Cc: Alexey Malahov Cc: Arnd Bergmann Cc: linux-mips@vger.kernel.org Link: https://lore.kernel.org/r/20200526222056.18072-3-Sergey.Semin@baikalelectronics.ru Reviewed-by: Rob Herring Signed-off-by: Stephen Boyd --- .../bindings/clock/baikal,bt1-ccu-div.yaml | 188 +++++++++++++++++++++ include/dt-bindings/clock/bt1-ccu.h | 32 ++++ include/dt-bindings/reset/bt1-ccu.h | 25 +++ 3 files changed, 245 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml create mode 100644 include/dt-bindings/reset/bt1-ccu.h (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml new file mode 100644 index 000000000000..2821425ee445 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-div.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 Clock Control Unit Dividers + +maintainers: + - Serge Semin + +description: | + Clocks Control Unit is the core of Baikal-T1 SoC System Controller + responsible for the chip subsystems clocking and resetting. The CCU is + connected with an external fixed rate oscillator, which signal is transformed + into clocks of various frequencies and then propagated to either individual + IP-blocks or to groups of blocks (clock domains). The transformation is done + by means of an embedded into CCU PLLs and gateable/non-gateable dividers. The + later ones are described in this binding. Each clock domain can be also + individually reset by using the domain clocks divider configuration + registers. Baikal-T1 CCU is logically divided into the next components: + 1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but + in general can provide any frequency supported by the CCU PLLs). + 2) PLLs clocks generators (PLLs). + 3) AXI-bus clock dividers (AXI) - described in this binding file. + 4) System devices reference clock dividers (SYS) - described in this binding + file. + which are connected with each other as shown on the next figure: + + +---------------+ + | Baikal-T1 CCU | + | +----+------|- MIPS P5600 cores + | +-|PLLs|------|- DDR controller + | | +----+ | + +----+ | | | | | + |XTAL|--|-+ | | +---+-| + +----+ | | | +-|AXI|-|- AXI-bus + | | | +---+-| + | | | | + | | +----+---+-|- APB-bus + | +-------|SYS|-|- Low-speed Devices + | +---+-|- High-speed Devices + +---------------+ + + Each sub-block is represented as a separate DT node and has an individual + driver to be bound with. + + In order to create signals of wide range frequencies the external oscillator + output is primarily connected to a set of CCU PLLs. Some of PLLs CLKOUT are + then passed over CCU dividers to create signals required for the target clock + domain (like AXI-bus or System Device consumers). The dividers have the + following structure: + + +--------------+ + CLKIN --|->+----+ 1|\ | + SETCLK--|--|/DIV|->| | | + CLKDIV--|--| | | |-|->CLKLOUT + LOCK----|--+----+ | | | + | |/ | + | | | + EN------|-----------+ | + RST-----|--------------|->RSTOUT + +--------------+ + + where CLKIN is the reference clock coming either from CCU PLLs or from an + external clock oscillator, SETCLK - a command to update the output clock in + accordance with a set divider, CLKDIV - clocks divider, LOCK - a signal of + the output clock stabilization, EN - enable/disable the divider block, + RST/RSTOUT - reset clocks domain signal. Depending on the consumer IP-core + peculiarities the dividers may lack of some functionality depicted on the + figure above (like EN, CLKDIV/LOCK/SETCLK). In this case the corresponding + clock provider just doesn't expose either switching functions, or the rate + configuration, or both of them. + + The clock dividers, which output clock is then consumed by the SoC individual + devices, are united into a single clocks provider called System Devices CCU. + Similarly the dividers with output clocks utilized as AXI-bus reference clocks + are called AXI-bus CCU. Both of them use the common clock bindings with no + custom properties. The list of exported clocks and reset signals can be found + in the files: 'include/dt-bindings/clock/bt1-ccu.h' and + 'include/dt-bindings/reset/bt1-ccu.h'. Since System Devices and AXI-bus CCU + are a part of the Baikal-T1 SoC System Controller their DT nodes are supposed + to be a children of later one. + +if: + properties: + compatible: + contains: + const: baikal,bt1-ccu-axi + +then: + properties: + clocks: + items: + - description: CCU SATA PLL output clock + - description: CCU PCIe PLL output clock + - description: CCU Ethernet PLL output clock + + clock-names: + items: + - const: sata_clk + - const: pcie_clk + - const: eth_clk + +else: + properties: + clocks: + items: + - description: External reference clock + - description: CCU SATA PLL output clock + - description: CCU PCIe PLL output clock + - description: CCU Ethernet PLL output clock + + clock-names: + items: + - const: ref_clk + - const: sata_clk + - const: pcie_clk + - const: eth_clk + +properties: + compatible: + enum: + - baikal,bt1-ccu-axi + - baikal,bt1-ccu-sys + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + +unevaluatedProperties: false + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + +examples: + # AXI-bus Clock Control Unit node: + - | + #include + + clock-controller@1f04d030 { + compatible = "baikal,bt1-ccu-axi"; + reg = <0x1f04d030 0x030>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&ccu_pll CCU_SATA_PLL>, + <&ccu_pll CCU_PCIE_PLL>, + <&ccu_pll CCU_ETH_PLL>; + clock-names = "sata_clk", "pcie_clk", "eth_clk"; + }; + # System Devices Clock Control Unit node: + - | + #include + + clock-controller@1f04d060 { + compatible = "baikal,bt1-ccu-sys"; + reg = <0x1f04d060 0x0a0>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&clk25m>, + <&ccu_pll CCU_SATA_PLL>, + <&ccu_pll CCU_PCIE_PLL>, + <&ccu_pll CCU_ETH_PLL>; + clock-names = "ref_clk", "sata_clk", "pcie_clk", + "eth_clk"; + }; + # Required Clock Control Unit PLL node: + - | + ccu_pll: clock-controller@1f04d000 { + compatible = "baikal,bt1-ccu-pll"; + reg = <0x1f04d000 0x028>; + #clock-cells = <1>; + + clocks = <&clk25m>; + clock-names = "ref_clk"; + }; +... diff --git a/include/dt-bindings/clock/bt1-ccu.h b/include/dt-bindings/clock/bt1-ccu.h index 931a4bea67c0..5f166d27a00a 100644 --- a/include/dt-bindings/clock/bt1-ccu.h +++ b/include/dt-bindings/clock/bt1-ccu.h @@ -13,4 +13,36 @@ #define CCU_PCIE_PLL 3 #define CCU_ETH_PLL 4 +#define CCU_AXI_MAIN_CLK 0 +#define CCU_AXI_DDR_CLK 1 +#define CCU_AXI_SATA_CLK 2 +#define CCU_AXI_GMAC0_CLK 3 +#define CCU_AXI_GMAC1_CLK 4 +#define CCU_AXI_XGMAC_CLK 5 +#define CCU_AXI_PCIE_M_CLK 6 +#define CCU_AXI_PCIE_S_CLK 7 +#define CCU_AXI_USB_CLK 8 +#define CCU_AXI_HWA_CLK 9 +#define CCU_AXI_SRAM_CLK 10 + +#define CCU_SYS_SATA_REF_CLK 0 +#define CCU_SYS_APB_CLK 1 +#define CCU_SYS_GMAC0_TX_CLK 2 +#define CCU_SYS_GMAC0_PTP_CLK 3 +#define CCU_SYS_GMAC1_TX_CLK 4 +#define CCU_SYS_GMAC1_PTP_CLK 5 +#define CCU_SYS_XGMAC_REF_CLK 6 +#define CCU_SYS_XGMAC_PTP_CLK 7 +#define CCU_SYS_USB_CLK 8 +#define CCU_SYS_PVT_CLK 9 +#define CCU_SYS_HWA_CLK 10 +#define CCU_SYS_UART_CLK 11 +#define CCU_SYS_I2C1_CLK 12 +#define CCU_SYS_I2C2_CLK 13 +#define CCU_SYS_GPIO_CLK 14 +#define CCU_SYS_TIMER0_CLK 15 +#define CCU_SYS_TIMER1_CLK 16 +#define CCU_SYS_TIMER2_CLK 17 +#define CCU_SYS_WDT_CLK 18 + #endif /* __DT_BINDINGS_CLOCK_BT1_CCU_H */ diff --git a/include/dt-bindings/reset/bt1-ccu.h b/include/dt-bindings/reset/bt1-ccu.h new file mode 100644 index 000000000000..3578e83026bc --- /dev/null +++ b/include/dt-bindings/reset/bt1-ccu.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC + * + * Baikal-T1 CCU reset indices + */ +#ifndef __DT_BINDINGS_RESET_BT1_CCU_H +#define __DT_BINDINGS_RESET_BT1_CCU_H + +#define CCU_AXI_MAIN_RST 0 +#define CCU_AXI_DDR_RST 1 +#define CCU_AXI_SATA_RST 2 +#define CCU_AXI_GMAC0_RST 3 +#define CCU_AXI_GMAC1_RST 4 +#define CCU_AXI_XGMAC_RST 5 +#define CCU_AXI_PCIE_M_RST 6 +#define CCU_AXI_PCIE_S_RST 7 +#define CCU_AXI_USB_RST 8 +#define CCU_AXI_HWA_RST 9 +#define CCU_AXI_SRAM_RST 10 + +#define CCU_SYS_SATA_REF_RST 0 +#define CCU_SYS_APB_RST 1 + +#endif /* __DT_BINDINGS_RESET_BT1_CCU_H */ -- cgit v1.2.3 From d63ed4ff41bb2d1f0738f801bcd9ff60dfc1eb7f Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sat, 4 Apr 2020 11:15:36 -0500 Subject: dt: Add bindings for IDT VersaClock 5P49V5925 IDT VersaClock 5 5P49V6965 has 5 clock outputs, 4 fractional dividers. Signed-off-by: Adam Ford Link: https://lkml.kernel.org/r/20200404161537.2312297-2-aford173@gmail.com Acked-by: Rob Herring Signed-off-by: Stephen Boyd --- Documentation/devicetree/bindings/clock/idt,versaclock5.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt index 05a245c9df08..bcff681a4bd0 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt @@ -12,6 +12,7 @@ Required properties: "idt,5p49v5933" "idt,5p49v5935" "idt,5p49v6901" + "idt,5p49v6965" - reg: i2c device address, shall be 0x68 or 0x6a. - #clock-cells: from common clock binding; shall be set to 1. - clocks: from common clock binding; list of parent clock handles, -- cgit v1.2.3