From 8ae12a0d85987dc138f8c944cb78a92bf466cea0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 8 Jan 2006 13:34:19 -0800 Subject: [PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- Documentation/spi/spi-summary | 416 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 416 insertions(+) create mode 100644 Documentation/spi/spi-summary (limited to 'Documentation/spi/spi-summary') diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary new file mode 100644 index 000000000000..00497f95ca4b --- /dev/null +++ b/Documentation/spi/spi-summary @@ -0,0 +1,416 @@ +Overview of Linux kernel SPI support +==================================== + +22-Nov-2005 + +What is SPI? +------------ +The "Serial Peripheral Interface" (SPI) is a four-wire point-to-point +serial link used to connect microcontrollers to sensors and memory. + +The three signal wires hold a clock (SCLK, often on the order of 10 MHz), +and parallel data lines with "Master Out, Slave In" (MOSI) or "Master In, +Slave Out" (MISO) signals. (Other names are also used.) There are four +clocking modes through which data is exchanged; mode-0 and mode-3 are most +commonly used. + +SPI masters may use a "chip select" line to activate a given SPI slave +device, so those three signal wires may be connected to several chips +in parallel. All SPI slaves support chipselects. Some devices have +other signals, often including an interrupt to the master. + +Unlike serial busses like USB or SMBUS, even low level protocols for +SPI slave functions are usually not interoperable between vendors +(except for cases like SPI memory chips). + + - SPI may be used for request/response style device protocols, as with + touchscreen sensors and memory chips. + + - It may also be used to stream data in either direction (half duplex), + or both of them at the same time (full duplex). + + - Some devices may use eight bit words. Others may different word + lengths, such as streams of 12-bit or 20-bit digital samples. + +In the same way, SPI slaves will only rarely support any kind of automatic +discovery/enumeration protocol. The tree of slave devices accessible from +a given SPI master will normally be set up manually, with configuration +tables. + +SPI is only one of the names used by such four-wire protocols, and +most controllers have no problem handling "MicroWire" (think of it as +half-duplex SPI, for request/response protocols), SSP ("Synchronous +Serial Protocol"), PSP ("Programmable Serial Protocol"), and other +related protocols. + +Microcontrollers often support both master and slave sides of the SPI +protocol. This document (and Linux) currently only supports the master +side of SPI interactions. + + +Who uses it? On what kinds of systems? +--------------------------------------- +Linux developers using SPI are probably writing device drivers for embedded +systems boards. SPI is used to control external chips, and it is also a +protocol supported by every MMC or SD memory card. (The older "DataFlash" +cards, predating MMC cards but using the same connectors and card shape, +support only SPI.) Some PC hardware uses SPI flash for BIOS code. + +SPI slave chips range from digital/analog converters used for analog +sensors and codecs, to memory, to peripherals like USB controllers +or Ethernet adapters; and more. + +Most systems using SPI will integrate a few devices on a mainboard. +Some provide SPI links on expansion connectors; in cases where no +dedicated SPI controller exists, GPIO pins can be used to create a +low speed "bitbanging" adapter. Very few systems will "hotplug" an SPI +controller; the reasons to use SPI focus on low cost and simple operation, +and if dynamic reconfiguration is important, USB will often be a more +appropriate low-pincount peripheral bus. + +Many microcontrollers that can run Linux integrate one or more I/O +interfaces with SPI modes. Given SPI support, they could use MMC or SD +cards without needing a special purpose MMC/SD/SDIO controller. + + +How do these driver programming interfaces work? +------------------------------------------------ +The header file includes kerneldoc, as does the +main source code, and you should certainly read that. This is just +an overview, so you get the big picture before the details. + +There are two types of SPI driver, here called: + + Controller drivers ... these are often built in to System-On-Chip + processors, and often support both Master and Slave roles. + These drivers touch hardware registers and may use DMA. + + Protocol drivers ... these pass messages through the controller + driver to communicate with a Slave or Master device on the + other side of an SPI link. + +So for example one protocol driver might talk to the MTD layer to export +data to filesystems stored on SPI flash like DataFlash; and others might +control audio interfaces, present touchscreen sensors as input interfaces, +or monitor temperature and voltage levels during industrial processing. +And those might all be sharing the same controller driver. + +A "struct spi_device" encapsulates the master-side interface between +those two types of driver. At this writing, Linux has no slave side +programming interface. + +There is a minimal core of SPI programming interfaces, focussing on +using driver model to connect controller and protocol drivers using +device tables provided by board specific initialization code. SPI +shows up in sysfs in several locations: + + /sys/devices/.../CTLR/spiB.C ... spi_device for on bus "B", + chipselect C, accessed through CTLR. + + /sys/bus/spi/devices/spiB.C ... symlink to the physical + spiB-C device + + /sys/bus/spi/drivers/D ... driver for one or more spi*.* devices + + /sys/class/spi_master/spiB ... class device for the controller + managing bus "B". All the spiB.* devices share the same + physical SPI bus segment, with SCLK, MOSI, and MISO. + +The basic I/O primitive submits an asynchronous message to an I/O queue +maintained by the controller driver. A completion callback is issued +asynchronously when the data transfer(s) in that message completes. +There are also some simple synchronous wrappers for those calls. + + +How does board-specific init code declare SPI devices? +------------------------------------------------------ +Linux needs several kinds of information to properly configure SPI devices. +That information is normally provided by board-specific code, even for +chips that do support some of automated discovery/enumeration. + +DECLARE CONTROLLERS + +The first kind of information is a list of what SPI controllers exist. +For System-on-Chip (SOC) based boards, these will usually be platform +devices, and the controller may need some platform_data in order to +operate properly. The "struct platform_device" will include resources +like the physical address of the controller's first register and its IRQ. + +Platforms will often abstract the "register SPI controller" operation, +maybe coupling it with code to initialize pin configurations, so that +the arch/.../mach-*/board-*.c files for several boards can all share the +same basic controller setup code. This is because most SOCs have several +SPI-capable controllers, and only the ones actually usable on a given +board should normally be set up and registered. + +So for example arch/.../mach-*/board-*.c files might have code like: + + #include /* for mysoc_spi_data */ + + /* if your mach-* infrastructure doesn't support kernels that can + * run on multiple boards, pdata wouldn't benefit from "__init". + */ + static struct mysoc_spi_data __init pdata = { ... }; + + static __init board_init(void) + { + ... + /* this board only uses SPI controller #2 */ + mysoc_register_spi(2, &pdata); + ... + } + +And SOC-specific utility code might look something like: + + #include + + static struct platform_device spi2 = { ... }; + + void mysoc_register_spi(unsigned n, struct mysoc_spi_data *pdata) + { + struct mysoc_spi_data *pdata2; + + pdata2 = kmalloc(sizeof *pdata2, GFP_KERNEL); + *pdata2 = pdata; + ... + if (n == 2) { + spi2->dev.platform_data = pdata2; + register_platform_device(&spi2); + + /* also: set up pin modes so the spi2 signals are + * visible on the relevant pins ... bootloaders on + * production boards may already have done this, but + * developer boards will often need Linux to do it. + */ + } + ... + } + +Notice how the platform_data for boards may be different, even if the +same SOC controller is used. For example, on one board SPI might use +an external clock, where another derives the SPI clock from current +settings of some master clock. + + +DECLARE SLAVE DEVICES + +The second kind of information is a list of what SPI slave devices exist +on the target board, often with some board-specific data needed for the +driver to work correctly. + +Normally your arch/.../mach-*/board-*.c files would provide a small table +listing the SPI devices on each board. (This would typically be only a +small handful.) That might look like: + + static struct ads7846_platform_data ads_info = { + .vref_delay_usecs = 100, + .x_plate_ohms = 580, + .y_plate_ohms = 410, + }; + + static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "ads7846", + .platform_data = &ads_info, + .mode = SPI_MODE_0, + .irq = GPIO_IRQ(31), + .max_speed_hz = 120000 /* max sample rate at 3V */ * 16, + .bus_num = 1, + .chip_select = 0, + }, + }; + +Again, notice how board-specific information is provided; each chip may need +several types. This example shows generic constraints like the fastest SPI +clock to allow (a function of board voltage in this case) or how an IRQ pin +is wired, plus chip-specific constraints like an important delay that's +changed by the capacitance at one pin. + +(There's also "controller_data", information that may be useful to the +controller driver. An example would be peripheral-specific DMA tuning +data or chipselect callbacks. This is stored in spi_device later.) + +The board_info should provide enough information to let the system work +without the chip's driver being loaded. The most troublesome aspect of +that is likely the SPI_CS_HIGH bit in the spi_device.mode field, since +sharing a bus with a device that interprets chipselect "backwards" is +not possible. + +Then your board initialization code would register that table with the SPI +infrastructure, so that it's available later when the SPI master controller +driver is registered: + + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + +Like with other static board-specific setup, you won't unregister those. + + +NON-STATIC CONFIGURATIONS + +Developer boards often play by different rules than product boards, and one +example is the potential need to hotplug SPI devices and/or controllers. + +For those cases you might need to use use spi_busnum_to_master() to look +up the spi bus master, and will likely need spi_new_device() to provide the +board info based on the board that was hotplugged. Of course, you'd later +call at least spi_unregister_device() when that board is removed. + + +How do I write an "SPI Protocol Driver"? +---------------------------------------- +All SPI drivers are currently kernel drivers. A userspace driver API +would just be another kernel driver, probably offering some lowlevel +access through aio_read(), aio_write(), and ioctl() calls and using the +standard userspace sysfs mechanisms to bind to a given SPI device. + +SPI protocol drivers are normal device drivers, with no more wrapper +than needed by platform devices: + + static struct device_driver CHIP_driver = { + .name = "CHIP", + .bus = &spi_bus_type, + .probe = CHIP_probe, + .remove = __exit_p(CHIP_remove), + .suspend = CHIP_suspend, + .resume = CHIP_resume, + }; + +The SPI core will autmatically attempt to bind this driver to any SPI +device whose board_info gave a modalias of "CHIP". Your probe() code +might look like this unless you're creating a class_device: + + static int __init CHIP_probe(struct device *dev) + { + struct spi_device *spi = to_spi_device(dev); + struct CHIP *chip; + struct CHIP_platform_data *pdata = dev->platform_data; + + /* get memory for driver's per-chip state */ + chip = kzalloc(sizeof *chip, GFP_KERNEL); + if (!chip) + return -ENOMEM; + dev_set_drvdata(dev, chip); + + ... etc + return 0; + } + +As soon as it enters probe(), the driver may issue I/O requests to +the SPI device using "struct spi_message". When remove() returns, +the driver guarantees that it won't submit any more such messages. + + - An spi_message is a sequence of of protocol operations, executed + as one atomic sequence. SPI driver controls include: + + + when bidirectional reads and writes start ... by how its + sequence of spi_transfer requests is arranged; + + + optionally defining short delays after transfers ... using + the spi_transfer.delay_usecs setting; + + + whether the chipselect becomes inactive after a transfer and + any delay ... by using the spi_transfer.cs_change flag; + + + hinting whether the next message is likely to go to this same + device ... using the spi_transfer.cs_change flag on the last + transfer in that atomic group, and potentially saving costs + for chip deselect and select operations. + + - Follow standard kernel rules, and provide DMA-safe buffers in + your messages. That way controller drivers using DMA aren't forced + to make extra copies unless the hardware requires it (e.g. working + around hardware errata that force the use of bounce buffering). + + If standard dma_map_single() handling of these buffers is inappropriate, + you can use spi_message.is_dma_mapped to tell the controller driver + that you've already provided the relevant DMA addresses. + + - The basic I/O primitive is spi_async(). Async requests may be + issued in any context (irq handler, task, etc) and completion + is reported using a callback provided with the message. + + - There are also synchronous wrappers like spi_sync(), and wrappers + like spi_read(), spi_write(), and spi_write_then_read(). These + may be issued only in contexts that may sleep, and they're all + clean (and small, and "optional") layers over spi_async(). + + - The spi_write_then_read() call, and convenience wrappers around + it, should only be used with small amounts of data where the + cost of an extra copy may be ignored. It's designed to support + common RPC-style requests, such as writing an eight bit command + and reading a sixteen bit response -- spi_w8r16() being one its + wrappers, doing exactly that. + +Some drivers may need to modify spi_device characteristics like the +transfer mode, wordsize, or clock rate. This is done with spi_setup(), +which would normally be called from probe() before the first I/O is +done to the device. + +While "spi_device" would be the bottom boundary of the driver, the +upper boundaries might include sysfs (especially for sensor readings), +the input layer, ALSA, networking, MTD, the character device framework, +or other Linux subsystems. + + +How do I write an "SPI Master Controller Driver"? +------------------------------------------------- +An SPI controller will probably be registered on the platform_bus; write +a driver to bind to the device, whichever bus is involved. + +The main task of this type of driver is to provide an "spi_master". +Use spi_alloc_master() to allocate the master, and class_get_devdata() +to get the driver-private data allocated for that device. + + struct spi_master *master; + struct CONTROLLER *c; + + master = spi_alloc_master(dev, sizeof *c); + if (!master) + return -ENODEV; + + c = class_get_devdata(&master->cdev); + +The driver will initialize the fields of that spi_master, including the +bus number (maybe the same as the platform device ID) and three methods +used to interact with the SPI core and SPI protocol drivers. It will +also initialize its own internal state. + + master->setup(struct spi_device *spi) + This sets up the device clock rate, SPI mode, and word sizes. + Drivers may change the defaults provided by board_info, and then + call spi_setup(spi) to invoke this routine. It may sleep. + + master->transfer(struct spi_device *spi, struct spi_message *message) + This must not sleep. Its responsibility is arrange that the + transfer happens and its complete() callback is issued; the two + will normally happen later, after other transfers complete. + + master->cleanup(struct spi_device *spi) + Your controller driver may use spi_device.controller_state to hold + state it dynamically associates with that device. If you do that, + be sure to provide the cleanup() method to free that state. + +The bulk of the driver will be managing the I/O queue fed by transfer(). + +That queue could be purely conceptual. For example, a driver used only +for low-frequency sensor acess might be fine using synchronous PIO. + +But the queue will probably be very real, using message->queue, PIO, +often DMA (especially if the root filesystem is in SPI flash), and +execution contexts like IRQ handlers, tasklets, or workqueues (such +as keventd). Your driver can be as fancy, or as simple, as you need. + + +THANKS TO +--------- +Contributors to Linux-SPI discussions include (in alphabetical order, +by last name): + +David Brownell +Russell King +Dmitry Pervushin +Stephen Street +Mark Underwood +Andrew Victor +Vitaly Wool + -- cgit v1.2.3