From 26f5df265f06b8c8fe9f5d0942b7d8df00e5edec Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 3 Nov 2008 17:39:46 +0100 Subject: ALSA: hda - Add ALC299 fujitsu preset model Added a preset model for FSC Amilo with ALC269 codec chip. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index e0e54a27fc10..fa8e9fadfaf4 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -857,6 +857,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. quanta Quanta FL1 eeepc-p703 ASUS Eeepc P703 P900A eeepc-p901 ASUS Eeepc P901 S101 + fujitsu FSC Amilo + auto auto-config reading BIOS (default) ALC662/663 3stack-dig 3-stack (2-channel) with SPDIF -- cgit v1.2.3 From 13c947444f4355293b49f83b809f178393a0a4d9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 5 Nov 2008 08:06:08 +0100 Subject: ALSA: hda - Add ASUS V1Sn support Asus V1s series laptops have an ALC660VD with PCI id: 0x1043, 0x1633. 1.) remove the previous behaviour of mapping that to the ALC861VD_LENOVO device. 2.) add a new ALC660VD_V1S device based on ALC861VD_LENOVO, with an added digital out. Signed-off-by: Tristan Aston Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_realtek.c | 19 ++++++++++++++++++- 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index fa8e9fadfaf4..f6594549bf5d 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -940,6 +940,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. lenovo Lenovo 3000 C200 dallas Dallas laptops hp HP TX1000 + asus-v1s ASUS V1Sn auto auto-config reading BIOS (default) CMI9880 diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e727e48a48e3..15779d8c7564 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -153,6 +153,7 @@ enum { enum { ALC660VD_3ST, ALC660VD_3ST_DIG, + ALC660VD_ASUS_V1S, ALC861VD_3ST, ALC861VD_3ST_DIG, ALC861VD_6ST_DIG, @@ -13842,6 +13843,7 @@ static void alc861vd_dallas_unsol_event(struct hda_codec *codec, unsigned int re static const char *alc861vd_models[ALC861VD_MODEL_LAST] = { [ALC660VD_3ST] = "3stack-660", [ALC660VD_3ST_DIG] = "3stack-660-digout", + [ALC660VD_ASUS_V1S] = "asus-v1s", [ALC861VD_3ST] = "3stack", [ALC861VD_3ST_DIG] = "3stack-digout", [ALC861VD_6ST_DIG] = "6stack-digout", @@ -13856,7 +13858,7 @@ static struct snd_pci_quirk alc861vd_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x30bf, "HP TX1000", ALC861VD_HP), SND_PCI_QUIRK(0x1043, 0x12e2, "Asus z35m", ALC660VD_3ST), SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST), - SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC861VD_LENOVO), + SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC660VD_ASUS_V1S), SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS", ALC660VD_3ST_DIG), SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST), SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba A135", ALC861VD_LENOVO), @@ -13963,6 +13965,21 @@ static struct alc_config_preset alc861vd_presets[] = { .unsol_event = alc861vd_dallas_unsol_event, .init_hook = alc861vd_dallas_automute, }, + [ALC660VD_ASUS_V1S] = { + .mixers = { alc861vd_lenovo_mixer }, + .init_verbs = { alc861vd_volume_init_verbs, + alc861vd_3stack_init_verbs, + alc861vd_eapd_verbs, + alc861vd_lenovo_unsol_verbs }, + .num_dacs = ARRAY_SIZE(alc660vd_dac_nids), + .dac_nids = alc660vd_dac_nids, + .dig_out_nid = ALC861VD_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes), + .channel_mode = alc861vd_3stack_2ch_modes, + .input_mux = &alc861vd_capture_source, + .unsol_event = alc861vd_lenovo_unsol_event, + .init_hook = alc861vd_lenovo_automute, + }, }; /* -- cgit v1.2.3 From c238b4f4038e0e49bb241640610584a088b268b1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 5 Nov 2008 14:57:20 +0100 Subject: ALSA: hda - Split ALC268 acer model There are actually two variants of ALC268 Acer implementation, one with an analog built-in mic (pin 0x19) and another with a digital mic (pin 0x12). Created a new model, acer-dmic, for the latter case now. So far, all known models are assigned to be analog-mic, according to the BIOS setup. If this doesn't match with the actual case, one needs to try model=acer-dmic, and fix the entry to point ALC268_ACER_DMIC if it works. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_realtek.c | 44 +++++++++++++++++++++++++ 2 files changed, 45 insertions(+) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index f6594549bf5d..3ab5fb1357a2 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -844,6 +844,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack 3-stack model toshiba Toshiba A205 acer Acer laptops + acer-dmic Acer laptops with digital-mic acer-aspire Acer Aspire One dell Dell OEM laptops (Vostro 1200) zepto Zepto laptops diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 15779d8c7564..425b0fc86f7d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -114,6 +114,7 @@ enum { ALC268_3ST, ALC268_TOSHIBA, ALC268_ACER, + ALC268_ACER_DMIC, ALC268_ACER_ASPIRE_ONE, ALC268_DELL, ALC268_ZEPTO, @@ -10714,6 +10715,22 @@ static struct snd_kcontrol_new alc268_acer_mixer[] = { { } }; +static struct snd_kcontrol_new alc268_acer_dmic_mixer[] = { + /* output mixer control */ + HDA_BIND_VOL("Master Playback Volume", &alc268_acer_bind_master_vol), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Switch", + .info = snd_hda_mixer_amp_switch_info, + .get = snd_hda_mixer_amp_switch_get, + .put = alc268_acer_master_sw_put, + .private_value = HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT), + }, + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_VOLUME("Line In Boost", 0x1a, 0, HDA_INPUT), + { } +}; + static struct hda_verb alc268_acer_aspire_one_verbs[] = { {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, @@ -11039,6 +11056,15 @@ static struct hda_input_mux alc268_capture_source = { }; static struct hda_input_mux alc268_acer_capture_source = { + .num_items = 3, + .items = { + { "Mic", 0x0 }, + { "Internal Mic", 0x1 }, + { "Line", 0x2 }, + }, +}; + +static struct hda_input_mux alc268_acer_dmic_capture_source = { .num_items = 3, .items = { { "Mic", 0x0 }, @@ -11322,6 +11348,7 @@ static const char *alc268_models[ALC268_MODEL_LAST] = { [ALC268_3ST] = "3stack", [ALC268_TOSHIBA] = "toshiba", [ALC268_ACER] = "acer", + [ALC268_ACER_DMIC] = "acer-dmic", [ALC268_ACER_ASPIRE_ONE] = "acer-aspire", [ALC268_DELL] = "dell", [ALC268_ZEPTO] = "zepto", @@ -11417,6 +11444,23 @@ static struct alc_config_preset alc268_presets[] = { .unsol_event = alc268_acer_unsol_event, .init_hook = alc268_acer_init_hook, }, + [ALC268_ACER_DMIC] = { + .mixers = { alc268_acer_dmic_mixer, alc268_capture_alt_mixer, + alc268_beep_mixer }, + .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs, + alc268_acer_verbs }, + .num_dacs = ARRAY_SIZE(alc268_dac_nids), + .dac_nids = alc268_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt), + .adc_nids = alc268_adc_nids_alt, + .capsrc_nids = alc268_capsrc_nids, + .hp_nid = 0x02, + .num_channel_mode = ARRAY_SIZE(alc268_modes), + .channel_mode = alc268_modes, + .input_mux = &alc268_acer_dmic_capture_source, + .unsol_event = alc268_acer_unsol_event, + .init_hook = alc268_acer_init_hook, + }, [ALC268_ACER_ASPIRE_ONE] = { .mixers = { alc268_acer_aspire_one_mixer, alc268_capture_alt_mixer }, -- cgit v1.2.3 From 5b2d1ecac2a79b9438aed731557b8912564cedfd Mon Sep 17 00:00:00 2001 From: Vincent Petry Date: Tue, 18 Nov 2008 22:21:57 +0800 Subject: ALSA: hda: Added Realtek ALC888 model entry for Acer Aspire 4930G laptop Added Realtek ALC888 model entry for the Acer Aspire 4930G laptop that fixes the following features: - internal microphone - heaphone jack sense - channel mode Signed-off-by: Vincent Petry Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_realtek.c | 115 ++++++++++++++++++++++++ 2 files changed, 116 insertions(+) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3ab5fb1357a2..010aa66ab920 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -903,6 +903,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 6stack-dig-demo 6-jack digital for Intel demo board acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc) acer-aspire Acer Aspire 9810 + acer-aspire-4930g Acer Aspire 4930G medion Medion Laptops medion-md2 Medion MD2 targa-dig Targa/MSI diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b7d34390eff4..6ec56c62cb18 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -216,6 +216,7 @@ enum { ALC883_TARGA_2ch_DIG, ALC883_ACER, ALC883_ACER_ASPIRE, + ALC888_ACER_ASPIRE_4930G, ALC883_MEDION, ALC883_MEDION_MD2, ALC883_LAPTOP_EAPD, @@ -1154,6 +1155,90 @@ static void alc_fix_pincfg(struct hda_codec *codec, } } +/* + * ALC888 Acer Aspire 4930G model + */ + +static struct hda_verb alc888_acer_aspire_4930g_verbs[] = { +/* Front Mic: set to PIN_IN (empty by default) */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, +/* Unselect Front Mic by default in input mixer 3 */ + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)}, +/* enable unsolicited event fpr HP jack */ + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, +/* Connect Internal HP to front */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, +/* Connect HP out to front */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, + { } +}; + +static struct hda_input_mux alc888_acer_aspire_4930g_capture_source[2] = { + /* Front mic only available on one ADC */ + { + .num_items = 4, + .items = { + { "Mic", 0x0 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + { "Front Mic", 0xb }, + }, + }, + { + .num_items = 3, + .items = { + { "Mic", 0x0 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + }, + } +}; + +static struct snd_kcontrol_new alc888_acer_aspire_4930g_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT), + HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, + HDA_OUTPUT), + HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT), + HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), + HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), + { } /* end */ +}; + +static void alc888_acer_aspire_4930g_automute(struct hda_codec *codec) +{ + unsigned int present; + present = snd_hda_codec_read(codec, 0x15, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + /* Toggle the internal HP PIN (regular muting doesn't work) */ + snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, + (present ? 0x0 : PIN_OUT)); +} + +static void alc888_acer_aspire_4930g_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + if (res >> 26 == ALC880_HP_EVENT) + alc888_acer_aspire_4930g_automute(codec); +} + /* * ALC880 3-stack model * @@ -6887,8 +6972,15 @@ static hda_nid_t alc883_adc_nids_alt[1] = { 0x08, }; +static hda_nid_t alc883_adc_nids_rev[2] = { + /* ADC2-1 */ + 0x09, 0x08 +}; + static hda_nid_t alc883_capsrc_nids[2] = { 0x23, 0x22 }; +static hda_nid_t alc883_capsrc_nids_rev[2] = { 0x22, 0x23 }; + /* input MUX */ /* FIXME: should be a matrix-type input source selection */ @@ -8180,6 +8272,7 @@ static const char *alc883_models[ALC883_MODEL_LAST] = { [ALC883_TARGA_2ch_DIG] = "targa-2ch-dig", [ALC883_ACER] = "acer", [ALC883_ACER_ASPIRE] = "acer-aspire", + [ALC888_ACER_ASPIRE_4930G] = "acer-aspire-4930g", [ALC883_MEDION] = "medion", [ALC883_MEDION_MD2] = "medion-md2", [ALC883_LAPTOP_EAPD] = "laptop-eapd", @@ -8205,6 +8298,8 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x0110, "Acer Aspire", ALC883_ACER_ASPIRE), SND_PCI_QUIRK(0x1025, 0x0112, "Acer Aspire 9303", ALC883_ACER_ASPIRE), SND_PCI_QUIRK(0x1025, 0x0121, "Acer Aspire 5920G", ALC883_ACER_ASPIRE), + SND_PCI_QUIRK(0x1025, 0x013e, "Acer Aspire 4930G", + ALC888_ACER_ASPIRE_4930G), SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */ SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL), SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG), @@ -8376,6 +8471,26 @@ static struct alc_config_preset alc883_presets[] = { .unsol_event = alc883_acer_aspire_unsol_event, .init_hook = alc883_acer_aspire_automute, }, + [ALC888_ACER_ASPIRE_4930G] = { + .mixers = { alc888_acer_aspire_4930g_mixer, + alc883_chmode_mixer }, + .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs, + alc888_acer_aspire_4930g_verbs }, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev), + .adc_nids = alc883_adc_nids_rev, + .capsrc_nids = alc883_capsrc_nids_rev, + .dig_out_nid = ALC883_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes), + .channel_mode = alc883_3ST_6ch_modes, + .need_dac_fix = 1, + .num_mux_defs = + ARRAY_SIZE(alc888_acer_aspire_4930g_capture_source), + .input_mux = alc888_acer_aspire_4930g_capture_source, + .unsol_event = alc888_acer_aspire_4930g_unsol_event, + .init_hook = alc888_acer_aspire_4930g_automute, + }, [ALC883_MEDION] = { .mixers = { alc883_fivestack_mixer, alc883_chmode_mixer }, -- cgit v1.2.3 From 1725b82a6e2721612a3572d0336f51f1f1c3cf54 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 21 Nov 2008 02:25:48 +0100 Subject: ALSA: hda - make laptop-eapd model back for AD1986A The changes specific for Samsung laptops seem unapplicable to other hardware models like ASUS. The mic inputs are lost on such hardware by the change 5d5d5f43f1b835c375de9bd270cce030d16e2871. This patch adds back the old laptop-eapd model, and create a new model "samsung" for the new one specific to Samsung laptops with automatic mic selection feature. Reference: kernel bugzilla #12070 http://bugzilla.kernel.org/show_bug.cgi?id=12070 Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 3 +- sound/pci/hda/patch_analog.c | 49 +++++++++++++++++++++++-- 2 files changed, 48 insertions(+), 4 deletions(-) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 010aa66ab920..e55081fdc8ab 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -984,9 +984,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 6stack 6-jack, separate surrounds (default) 3stack 3-stack, shared surrounds laptop 2-channel only (FSC V2060, Samsung M50) - laptop-eapd 2-channel with EAPD (Samsung R65, ASUS A6J) + laptop-eapd 2-channel with EAPD (ASUS A6J) laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100) ultra 2-channel with EAPD (Samsung Ultra tablet PC) + samsung 2-channel with EAPD (Samsung R65) AD1988/AD1988B/AD1989A/AD1989B 6stack 6-jack diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 032cbb4bd985..0cc6be12b8b7 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -638,6 +638,36 @@ static struct hda_input_mux ad1986a_automic_capture_source = { }; static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = { + HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol), + HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw), + HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT), + HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Capture Source", + .info = ad198x_mux_enum_info, + .get = ad198x_mux_enum_get, + .put = ad198x_mux_enum_put, + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "External Amplifier", + .info = ad198x_eapd_info, + .get = ad198x_eapd_get, + .put = ad198x_eapd_put, + .private_value = 0x1b | (1 << 8), /* port-D, inversed */ + }, + { } /* end */ +}; + +static struct snd_kcontrol_new ad1986a_samsung_mixers[] = { HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol), HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw), HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT), @@ -930,6 +960,7 @@ enum { AD1986A_LAPTOP_EAPD, AD1986A_LAPTOP_AUTOMUTE, AD1986A_ULTRA, + AD1986A_SAMSUNG, AD1986A_MODELS }; @@ -940,6 +971,7 @@ static const char *ad1986a_models[AD1986A_MODELS] = { [AD1986A_LAPTOP_EAPD] = "laptop-eapd", [AD1986A_LAPTOP_AUTOMUTE] = "laptop-automute", [AD1986A_ULTRA] = "ultra", + [AD1986A_SAMSUNG] = "samsung", }; static struct snd_pci_quirk ad1986a_cfg_tbl[] = { @@ -962,9 +994,9 @@ static struct snd_pci_quirk ad1986a_cfg_tbl[] = { SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba", AD1986A_LAPTOP_EAPD), SND_PCI_QUIRK(0x144d, 0xb03c, "Samsung R55", AD1986A_3STACK), SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_LAPTOP), - SND_PCI_QUIRK(0x144d, 0xc023, "Samsung X60", AD1986A_LAPTOP_EAPD), - SND_PCI_QUIRK(0x144d, 0xc024, "Samsung R65", AD1986A_LAPTOP_EAPD), - SND_PCI_QUIRK(0x144d, 0xc026, "Samsung X11", AD1986A_LAPTOP_EAPD), + SND_PCI_QUIRK(0x144d, 0xc023, "Samsung X60", AD1986A_SAMSUNG), + SND_PCI_QUIRK(0x144d, 0xc024, "Samsung R65", AD1986A_SAMSUNG), + SND_PCI_QUIRK(0x144d, 0xc026, "Samsung X11", AD1986A_SAMSUNG), SND_PCI_QUIRK(0x144d, 0xc027, "Samsung Q1", AD1986A_ULTRA), SND_PCI_QUIRK(0x144d, 0xc504, "Samsung Q35", AD1986A_3STACK), SND_PCI_QUIRK(0x17aa, 0x1011, "Lenovo M55", AD1986A_LAPTOP), @@ -1046,6 +1078,17 @@ static int patch_ad1986a(struct hda_codec *codec) break; case AD1986A_LAPTOP_EAPD: spec->mixers[0] = ad1986a_laptop_eapd_mixers; + spec->num_init_verbs = 2; + spec->init_verbs[1] = ad1986a_eapd_init_verbs; + spec->multiout.max_channels = 2; + spec->multiout.num_dacs = 1; + spec->multiout.dac_nids = ad1986a_laptop_dac_nids; + if (!is_jack_available(codec, 0x25)) + spec->multiout.dig_out_nid = 0; + spec->input_mux = &ad1986a_laptop_eapd_capture_source; + break; + case AD1986A_SAMSUNG: + spec->mixers[0] = ad1986a_samsung_mixers; spec->num_init_verbs = 3; spec->init_verbs[1] = ad1986a_eapd_init_verbs; spec->init_verbs[2] = ad1986a_automic_verbs; -- cgit v1.2.3 From a5fcf89eff2372b50f2d47fbb3e1f3090f044ee3 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Sat, 22 Nov 2008 09:40:55 +0800 Subject: ALSA: hda - document the ELD proc interface Describe what ELD proc interface provides and how to fix incorrect values. Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/Procfile.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt index f738b296440a..bba2dbb79d81 100644 --- a/Documentation/sound/alsa/Procfile.txt +++ b/Documentation/sound/alsa/Procfile.txt @@ -153,6 +153,16 @@ card*/codec#* Shows the general codec information and the attribute of each widget node. +card*/eld#* + Available for HDMI or DisplayPort interfaces. + Shows ELD(EDID Like Data) info retrieved from the attached HDMI sink, + and describes its audio capabilities and configurations. + + Some ELD fields may be modified by doing `echo name hex_value > eld#*`. + Only do this if you are sure the HDMI sink provided value is wrong. + And if that makes your HDMI audio work, please report to us so that we + can fix it in future kernel releases. + Sequencer Information --------------------- -- cgit v1.2.3 From ef8ef5fb1027b56f867d4b913cf52bfdc610d2a7 Mon Sep 17 00:00:00 2001 From: Vincent Petry Date: Sun, 23 Nov 2008 11:31:41 +0800 Subject: ALSA: hda: Added an ALC888 model entry for Fujitsu-Siemens Amilo Xa3530 This patch fixes the bug 0004240: ALC888 - Intel HDA - Headphone Controlling. It is made against the 2008-11-23 snapshot. Added Realtek ALC888 model entry for the Fujitsu-Siemens Amilo Xa3530 laptop. It has 4 jacks: HP out, Mic-in, Line-in and Line-out/Side/SPDIF (this one is on the laptop side, the other ones are on the rear). Model detection works. Headphone jack sense works now. Front mic works now, was same as Acer Aspire 4930G. Added channel mode from 2 to 8 channels. In 2ch and 4ch modes, the front is also sent to the Line-out/side jack for convenience instead of just muting the Line-out/side jack like other models do. When using the Mic-in jack as CLFE, the sound is very low (bug?). To work it around, in 6ch mode the CLFE channel is duplicated to the Line-out/side jack because this one has a better amp. Cc: manu@frogged.de Signed-off-by: Vincent Petry Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 1 + sound/pci/hda/patch_realtek.c | 176 ++++++++++++++++++++++-- 2 files changed, 168 insertions(+), 9 deletions(-) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 1b7e36af0f0e..93624e7b4f04 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -919,6 +919,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. mitac Mitac 8252D clevo-m720 Clevo M720 laptop series fujitsu-pi2515 Fujitsu AMILO Pi2515 + fujitsu-xa3530 Fujitsu AMILO XA3530 3stack-6ch-intel Intel DG33* boards auto auto-config reading BIOS (default) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6ec56c62cb18..f52e271edd57 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -230,6 +230,7 @@ enum { ALC883_MITAC, ALC883_CLEVO_M720, ALC883_FUJITSU_PI2515, + ALC888_FUJITSU_XA3530, ALC883_3ST_6ch_INTEL, ALC888_ASUS_M90V, ALC888_ASUS_EEE1601, @@ -1155,6 +1156,141 @@ static void alc_fix_pincfg(struct hda_codec *codec, } } +/* + * ALC888 + */ + +/* + * 2ch mode + */ +static struct hda_verb alc888_4ST_ch2_intel_init[] = { +/* Mic-in jack as mic in */ + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, +/* Line-in jack as Line in */ + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, +/* Line-Out as Front */ + { 0x17, AC_VERB_SET_CONNECT_SEL, 0x00}, + { } /* end */ +}; + +/* + * 4ch mode + */ +static struct hda_verb alc888_4ST_ch4_intel_init[] = { +/* Mic-in jack as mic in */ + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, +/* Line-in jack as Surround */ + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, +/* Line-Out as Front */ + { 0x17, AC_VERB_SET_CONNECT_SEL, 0x00}, + { } /* end */ +}; + +/* + * 6ch mode + */ +static struct hda_verb alc888_4ST_ch6_intel_init[] = { +/* Mic-in jack as CLFE */ + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, +/* Line-in jack as Surround */ + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, +/* Line-Out as CLFE (workaround because Mic-in is not loud enough) */ + { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03}, + { } /* end */ +}; + +/* + * 8ch mode + */ +static struct hda_verb alc888_4ST_ch8_intel_init[] = { +/* Mic-in jack as CLFE */ + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, +/* Line-in jack as Surround */ + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, +/* Line-Out as Side */ + { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03}, + { } /* end */ +}; + +static struct hda_channel_mode alc888_4ST_8ch_intel_modes[4] = { + { 2, alc888_4ST_ch2_intel_init }, + { 4, alc888_4ST_ch4_intel_init }, + { 6, alc888_4ST_ch6_intel_init }, + { 8, alc888_4ST_ch8_intel_init }, +}; + +/* + * ALC888 Fujitsu Siemens Amillo xa3530 + */ + +static struct hda_verb alc888_fujitsu_xa3530_verbs[] = { +/* Front Mic: set to PIN_IN (empty by default) */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, +/* Connect Internal HP to Front */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, +/* Connect Bass HP to Front */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, +/* Connect Line-Out side jack (SPDIF) to Side */ + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x17, AC_VERB_SET_CONNECT_SEL, 0x03}, +/* Connect Mic jack to CLFE */ + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x18, AC_VERB_SET_CONNECT_SEL, 0x02}, +/* Connect Line-in jack to Surround */ + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01}, +/* Connect HP out jack to Front */ + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, +/* Enable unsolicited event for HP jack and Line-out jack */ + {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + {0x17, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + {} +}; + +static void alc888_fujitsu_xa3530_automute(struct hda_codec *codec) +{ + unsigned int present; + unsigned int bits; + /* Line out presence */ + present = snd_hda_codec_read(codec, 0x17, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + /* HP out presence */ + present = present || snd_hda_codec_read(codec, 0x1b, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + bits = present ? HDA_AMP_MUTE : 0; + /* Toggle internal speakers muting */ + snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); + /* Toggle internal bass muting */ + snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); +} + +static void alc888_fujitsu_xa3530_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + if (res >> 26 == ALC880_HP_EVENT) + alc888_fujitsu_xa3530_automute(codec); +} + + /* * ALC888 Acer Aspire 4930G model */ @@ -1164,7 +1300,7 @@ static struct hda_verb alc888_acer_aspire_4930g_verbs[] = { {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, /* Unselect Front Mic by default in input mixer 3 */ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)}, -/* enable unsolicited event fpr HP jack */ +/* Enable unsolicited event for HP jack */ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, /* Connect Internal HP to front */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, @@ -1177,7 +1313,7 @@ static struct hda_verb alc888_acer_aspire_4930g_verbs[] = { { } }; -static struct hda_input_mux alc888_acer_aspire_4930g_capture_source[2] = { +static struct hda_input_mux alc888_2_capture_sources[2] = { /* Front mic only available on one ADC */ { .num_items = 4, @@ -1198,7 +1334,7 @@ static struct hda_input_mux alc888_acer_aspire_4930g_capture_source[2] = { } }; -static struct snd_kcontrol_new alc888_acer_aspire_4930g_mixer[] = { +static struct snd_kcontrol_new alc888_base_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), @@ -1225,11 +1361,12 @@ static struct snd_kcontrol_new alc888_acer_aspire_4930g_mixer[] = { static void alc888_acer_aspire_4930g_automute(struct hda_codec *codec) { unsigned int present; + unsigned int bits; present = snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; - /* Toggle the internal HP PIN (regular muting doesn't work) */ - snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, - (present ? 0x0 : PIN_OUT)); + bits = present ? HDA_AMP_MUTE : 0; + snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); } static void alc888_acer_aspire_4930g_unsol_event(struct hda_codec *codec, @@ -8286,6 +8423,7 @@ static const char *alc883_models[ALC883_MODEL_LAST] = { [ALC883_MITAC] = "mitac", [ALC883_CLEVO_M720] = "clevo-m720", [ALC883_FUJITSU_PI2515] = "fujitsu-pi2515", + [ALC888_FUJITSU_XA3530] = "fujitsu-xa3530", [ALC883_3ST_6ch_INTEL] = "3stack-6ch-intel", [ALC1200_ASUS_P5Q] = "asus-p5q", [ALC883_AUTO] = "auto", @@ -8346,6 +8484,8 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch), SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION), SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515", ALC883_FUJITSU_PI2515), + SND_PCI_QUIRK(0x1734, 0x113d, "Fujitsu AMILO Xa3530", + ALC888_FUJITSU_XA3530), SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch), SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763), SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763), @@ -8472,7 +8612,7 @@ static struct alc_config_preset alc883_presets[] = { .init_hook = alc883_acer_aspire_automute, }, [ALC888_ACER_ASPIRE_4930G] = { - .mixers = { alc888_acer_aspire_4930g_mixer, + .mixers = { alc888_base_mixer, alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs, alc888_acer_aspire_4930g_verbs }, @@ -8486,8 +8626,8 @@ static struct alc_config_preset alc883_presets[] = { .channel_mode = alc883_3ST_6ch_modes, .need_dac_fix = 1, .num_mux_defs = - ARRAY_SIZE(alc888_acer_aspire_4930g_capture_source), - .input_mux = alc888_acer_aspire_4930g_capture_source, + ARRAY_SIZE(alc888_2_capture_sources), + .input_mux = alc888_2_capture_sources, .unsol_event = alc888_acer_aspire_4930g_unsol_event, .init_hook = alc888_acer_aspire_4930g_automute, }, @@ -8634,6 +8774,24 @@ static struct alc_config_preset alc883_presets[] = { .unsol_event = alc883_2ch_fujitsu_pi2515_unsol_event, .init_hook = alc883_2ch_fujitsu_pi2515_automute, }, + [ALC888_FUJITSU_XA3530] = { + .mixers = { alc888_base_mixer, alc883_chmode_mixer }, + .init_verbs = { alc883_init_verbs, + alc888_fujitsu_xa3530_verbs }, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev), + .adc_nids = alc883_adc_nids_rev, + .capsrc_nids = alc883_capsrc_nids_rev, + .dig_out_nid = ALC883_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc888_4ST_8ch_intel_modes), + .channel_mode = alc888_4ST_8ch_intel_modes, + .num_mux_defs = + ARRAY_SIZE(alc888_2_capture_sources), + .input_mux = alc888_2_capture_sources, + .unsol_event = alc888_fujitsu_xa3530_unsol_event, + .init_hook = alc888_fujitsu_xa3530_automute, + }, [ALC888_LENOVO_SKY] = { .mixers = { alc888_lenovo_sky_mixer, alc883_chmode_mixer }, .init_verbs = { alc883_init_verbs, alc888_lenovo_sky_verbs}, -- cgit v1.2.3 From a7fe49bf01dd64b3c73ad0e172f68bd03c813d65 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 3 Dec 2008 18:26:35 +0100 Subject: ALSA: Add more documentation about HD-audio driver The file can be converted to PDF via asciidoc. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 535 ++++++++++++++++++++++++++++++++++ 1 file changed, 535 insertions(+) create mode 100644 Documentation/sound/alsa/HD-Audio.txt (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt new file mode 100644 index 000000000000..e758f24017bf --- /dev/null +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -0,0 +1,535 @@ +MORE NOTES ON HD-AUDIO DRIVER +============================= + Takashi Iwai + + +GENERAL +------- + +HD-audio is the new standard on-board audio component on modern PCs +after AC97. Although Linux has been supporting HD-audio since long +time ago, there are often problems with new machines. A part of the +problem is broken BIOS, and rest is the driver implementation. This +document explains the trouble-shooting and debugging methods for the +HD-audio hardware. + +The HD-audio component consists of two parts: the controller chip and +the codec chips on the HD-audio bus. Linux provides a single driver +for all controllers, snd-hda-intel. Since the HD-audio controllers +are supposed to be compatible, the single snd-hda-driver should work +in most cases. But, not surprisingly, there are known bugs and issues +specific to each controller type. The snd-hda-intel driver has a +bunch of workarounds for these as described below. + +A controller may have multiple codecs. Usually you have one audio +codec and optionally one modem codec. In some cases, there can be +multiple audio codecs, e.g. for analog and digital outputs, but the +driver might not work properly. + +The snd-hda-intel driver has several different codec parsers depending +on the codec. It has a generic parser as a fallback, but this +functionality is fairly limited until now. Instead of the generic +parser, usually the codec-specific parser (coded in patch_*.c) is used +for the codec-specific implementations. The details about the +codec-specific problems are explained in the later sections. + +If you are interested in the deep debugging of HD-audio, read the +HD-audio specification at first. The specification is found on +Intel's web page, for example: + +- http://www.intel.com/standards/hdaudio/ + + +HD-AUDIO CONTROLLER +------------------- + +DMA-Position Problem +~~~~~~~~~~~~~~~~~~~~ +The most common problem of the controller is the inaccurate DMA +pointer reporting. The DMA pointer for playback and capture can be +read in two ways, either via a LPIB register or via a position-buffer +map. As default the driver tries to reads from the io-mapped +position-buffer, and falls back to LPIB if it appears unupdated. +However, this detection isn't perfect on some devices. In such a +case, you can change the default method via `position_fix` option. + +`position_fix=1` means to use LPIB method explicitly. +`position_fix=2` means to use the position-buffer. 0 is the default +value, the automatic check. If you get a problem of repeated sounds, +this option might help. + +In addition to that, every controller is known to be broken regarding +the wake-up timing. It wakes up a few samples before actually +processing the data on the buffer. This caused a lot of problems, for +example, with ALSA dmix or JACK. Since 2.6.27 kernel, the driver puts +an artificial delay to the wake up timing. This delay is controlled +via `bdl_pos_adj` option. + +When `bdl_pos_adj` is a negative value (as default), it's assigned to +an appropriate value depending on the controller chip. For Intel +chip, it'd be 1 while it'd be 32 for others. Usually this works. +Only in case it doesn't work and you get warning messages, you should +change to other values. + + +Codec-Probing Problem +~~~~~~~~~~~~~~~~~~~~~ +A less often but a more severe problem is the codec probing. When +BIOS reports the available codec slots wrongly, the driver gets +confused and tries to access the non-existing codec slot. This often +results in the total screw-up, and destruct the further communication +with the codec chips. The symptom appears usually as the error +message like: +------------------------------------------------------------------------ + hda_intel: azx_get_response timeout, switching to polling mode: \ + last cmd=0x12345678 + hda_intel: azx_get_response timeout, switching to single_cmd mode: \ + last cmd=0x12345678 +------------------------------------------------------------------------ + +The first line is a warning, and this is usually relatively harmless. +It means that the codec response isn't notified via an IRQ. The +driver uses explicit polling method to read the response. It gives +very slight CPU overhead, but you'd unlikely notice it. + +The second line is, however, a fatal error. If this happens, usually +it means that something is really wrong. Most likely you are +accessing a non-existing codec slot. + +Thus, if the second error message appears, try to narrow the probed +codec slots via `probe_mask` option. It's a bitmask, and each bit +corresponding to the codec slot. For example, to probe only the +first slot, pass `probe_mask=1`. For the first and the third slots, +pass `probe_mask=5` (where 5 = 1 | 4), and so on. + +Since 2.6.29 kernel, the driver has a more robust probing method, so +this error might happen rarely, though. + + +Interrupt Handling +~~~~~~~~~~~~~~~~~~ +In rare but some cases, the interrupt isn't properly handled as +default. You would notice this by the DMA transfer error reported by +ALSA PCM core, for example. Using MSI might help in such a case. +Pass `enable_msi=1` option for enabling MSI. + + +HD-AUDIO CODEC +-------------- + +Model Option +~~~~~~~~~~~~ +The most common problems with the HD-audio driver is the unsupported +codec features or the mismatched device configuration. Most of +codec-specific code has several preset models, either to override the +BIOS setup or to provide more comprehensive features. + +The driver checks PCI SSID and looks through the static configuration +table until any matching entry is found. If you have a new machine, +you may see a message like below: +------------------------------------------------------------------------ + hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... +------------------------------------------------------------------------ +Even if you such a message, DON'T PANIC. Take a deep breath (and keep +your towel). First of all, it's an informational message, no warning, +no error. This means that the PCI SSID of your device isn't listed in +the known preset model list. But, this doesn't mean that the driver +is broken. Many codec-driver provides the automatic configuration +based on the BIOS setup. + +The HD-audio codec has usually "pin" widgets, and BIOS sets the default +configuration of each pin, which indicates the location, the +connection type, the jack color, etc. The HD-audio driver can guess +the right connection judging from these default configuration values. +However -- some codec support codes, such as patch_analog.c, don't +support the automatic probing (yet as of 2.6.28). And, BIOS is often, +yes, pretty often broken. It sets up wrong values and screws up the +driver. + +The preset model is provided basically to override such a situation. +When the matching preset model is found in the list, the driver +assumes the static configuration of that preset and builds the mixer +and PCM based on the static information. Thus, if you have a newer +machine with a slightly different PCI SSID from the existing one, you +may have a good chance to re-use the same model. You can pass the +`model` option to specify the preset model instead of PCI SSID +look-up. + +What `model` option values are available depends on the codec chip. +Check your codec chip from the codec proc file (see "Codec Proc-File" +section below). It will show the vendor/product name of your codec +chip. Then, see Documentation/sound/alsa/ALSA-Configuration.txt file. +In the section of HD-audio driver, you can find a list of codecs and +`model` options belonging to each codec. For example, for Realtek +ALC262 codec chip, pass `model=ultra` for devices that are compatible +with Samsung Q1 Ultra. + +Thus, the first thing you can do for any brand-new, unsupported +HD-audio hardware is to check HD-audio codec and several different +`model` option values. If you have a luck, some of them might suit +with your device well. + +Some codecs such as ALC880 have a special model option `model=test`. +This configures the driver to provide as many mixer controls as +possible for every single pin feature except for the unsolicited +events (and maybe some other specials). Adjust each mixer element and +try the I/O in the way of trial-and-error until figuring out the whole +I/O pin mappings. + +Note that `model=generic` has a special meaning. It means to use the +generic parser regardless of the codec. Usually the codec-specific +parser is much better than the generic parser (as now). Thus this +option is more about the debugging purpose. + + +Speaker and Headphone Output +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +One of the most frequent (and obvious) bugs with HD-audio is the +silent output from either or both of a built-in speaker and a +headphone jack. In general, you should try a headphone output at +first. A speaker output often requires more additional controls like +the amplifier. Thus a headphone output has a slightly better chance. + +Before making a bug report, double-check whether the mixer is set up +correctly. The recent version of snd-hda-intel driver provides mostly +"Master" volume control as well as "Front" volume. In addition, there +are individual "Headphone" and "Speaker" controls. + +Ditto for the speaker output. There can be "External Amplifier" +switch on some codecs. Turn on this if present. + +Another related problem is the automatic mute of speaker output by +headphone plugging. This feature is implemented in most cases, but +not on every preset model or codec-support code. + +In anyway, try a different model option if you have such a problem. +Some other models may match better and give you more matching +functionality. If none of the available models works, send a bug +report. See the bug report section for details. + +If you are masochistic enough to debug the driver problem, note the +following: + +- The speaker (and the headphone, too) output often requires the + external amplifier. This can be set usually via EAPD verb or a + certain GPIO. If the codec pin supports EAPD, you have a better + chance via SET_EAPD_BTL verb (0x70c). On others, GPIO pin (mostly + it's either GPIO0 or GPIO1) can turn on/off EAPD. +- Some Realtek codecs require special vendor-specific coefficients to + turn on the amplifier. See patch_realtek.c. +- IDT codecs may have extra power-enable/disable controls on each + analog pin. See patch_sigmatel.c. +- Very rare but some devices don't accept the pin-detection verb until + triggered. Issuing GET_PIN_SENSE verb (0xf09) may result in the + codec-communication stall. Some examples are found in + patch_realtek.c. + + +Capture Problems +~~~~~~~~~~~~~~~~ +The capture problems are often missing setups of mixers. Thus, before +submitting a bug report, make sure that you set up the mixer +correctly. For example, both "Capture Volume" and "Capture Switch" +have to be set properly in addition to the right "Capture Source" or +"Input Source" selection. Some devices have "Mic Boost" volume or +switch. + +When the PCM device is opened via "default" PCM (without pulse-audio +plugin), you'll likely have "Digital Capture Volume" control as well. +This is provided for the extra gain/attenuation of the signal in +software, especially for the inputs without the hardware volume +control such as digital microphones. Unless really needed, this +should be set to exactly 50%, corresponding to 0dB. When you use "hw" +PCM, i.e., a raw access PCM, this control will have no influence, +though. + +It's known that some codecs / devices have fairly bad analog circuits, +and the recorded sound contains a certain DC-offset. This is no bug +of the driver. + +Most of modern laptops have no analog CD-input connection. Thus, the +recording from CD input won't work in many cases although the driver +provides it as the capture source. + +The automatic switching of the built-in and external mic per plugging +is implemented on some codec models but not on every model. Partly +because of my laziness but mostly lack of testers. Feel free to +submit the improvement patch to the author. + + +Direct Debugging +~~~~~~~~~~~~~~~~ +If no model option gives you a better result, and you are a touch guy +to fight again the evil, try debugging via hitting the raw HD-audio +codec verbs to the device. Some tools are available: hda-emu and +hda-analyzer. The detailed description is found in the sections +below. You'd need to enable hwdep for using these tools. See "Kernel +Configuration". + + +OTHER ISSUES +------------ + +Kernel Configuration +~~~~~~~~~~~~~~~~~~~~ +In general, I recommend you to enable the sound debug option, +`CONFIG_SND_DEBUG=y`, no matter whether you are debugging or not. +This enables snd_printd() macro and others, and you'll get additional +kernel messages at probing. + +In addition, you can enable `CONFIG_SND_DEBUG_VERBOSE=y`. But this +will give you far more messages. Thus turn this on only when you are +sure to want it. + +Don't forget to turn on the appropriate `CONFIG_SND_HDA_CODEC_*` +options. Note that each of them corresponds to the codec chip, not +the controller chip. Thus, even if lspci shows the Nvidia controller, +you may choose the option for other vendors. If you are unsure, just +choose all yes. + +`CONFIG_SND_HDA_HWDEP` is a useful option for debugging the driver. +When this is enabled, the driver creates hardware-dependent devices +(one per each codec), and you have a raw access to the device via +hda-verb program. For example, `hwC0D2` will be created for the card +0 codec slot #2. For debug tools such as hda-verb and hda-analyzer, +the hwdep device has to be enabled. Thus, turn this on always. + +`CONFIG_SND_HDA_RECONFIG` is a new option, and this depends on the +hwdep option above. When enabled, you'll have some sysfs files under +the corresponding hwdep directory. See "HD-audio reconfiguration" +section below. + +`CONFIG_SND_HDA_POWER_SAVE` option enables the power-saving feature. +See "Power-saving" section below. + + +Codec Proc-File +~~~~~~~~~~~~~~~ +The codec proc-file is a treasure-chest for debugging HD-audio. +It shows most of useful information of each codec widget. + +The proc file is located in /proc/asound/card*/codec#*, one file per +each codec slot. You can know the codec vendor, product id and +names, the type of each widget, capabilities and so on. +This file, however, doesn't show the jack sensing state, so far. This +is because the jack-sensing might be depending on the trigger state. + +This file will be picked up by the debug tools, and also it can be fed +to the emulator as the primary codec information. See the debug tools +section below. + +This proc file can be also used to check whether the generic parser is +used. When the generic parser is used, the vendor/product ID name +will appear as "Realtek ID 0262", instead of "Realtek ALC262". + + +HD-Audio Reconfiguration +~~~~~~~~~~~~~~~~~~~~~~~~ +This is an experimental feature to allow you re-configure the HD-audio +codec dynamically without reloading the driver. The following sysfs +files are available under each codec-hwdep device directory (e.g. +/sys/class/sound/hwC0D0): + +vendor_id:: + Shows the 32bit codec vendor-id hex number. You can change the + vendor-id value by writing to this file. +subsystem_id:: + Shows the 32bit codec subsystem-id hex number. You can change the + subsystem-id value by writing to this file. +revision_id:: + Shows the 32bit codec revision-id hex number. You can change the + revision-id value by writing to this file. +afg:: + Shows the AFG ID. This is read-only. +mfg:: + Shows the MFG ID. This is read-only. +name:: + Shows the codec name string. Can be changed by writing to this + file. +modelname:: + Shows the currently set `model` option. Can be changed by writing + to this file. +init_verbs:: + The extra verbs to execute at initialization. You can add a verb by + writing to this file. Pass tree numbers, nid, verb and parameter. +hints:: + Shows hint strings for codec parsers for any use. Right now it's + not used. +reconfig:: + Triggers the codec re-configuration. When any value is written to + this file, the driver re-initialize and parses the codec tree + again. All the changes done by the sysfs entries above are taken + into account. +clear:: + Resets the codec, removes the mixer elements and PCM stuff of the + specified codec, and clear all init verbs and hints. + + +Power-Saving +~~~~~~~~~~~~ +The power-saving is a kind of auto-suspend of the device. When the +device is inactive for a certain time, the device is automatically +turned off to save the power. The time to go down is specified via +`power_save` module option, and this option can be changed dynamically +via sysfs. + +The power-saving won't work when the analog loopback is enabled on +some codecs. Make sure that you mute all unneeded signal routes when +you want the power-saving. + +The power-saving feature might cause audible click noises at each +power-down/up depending on the device. Some of them might be +solvable, but some are hard, I'm afraid. Some distros such as +openSUSE enables the power-saving feature automatically when the power +cable is unplugged. Thus, if you hear noises, suspect first the +power-saving. See /sys/modules/snd_hda_intel/parameters/power_save to +check the current value. If it's non-zero, the feature is turned on. + + +Sending a Bug Report +~~~~~~~~~~~~~~~~~~~~ +If any model or module options don't work for your device, it's time +to send a bug report to the developers. Give the following in your +bug report: + +- Hardware vendor, product and model names +- Kernel version (and ALSA-driver version if you built externally) +- `alsa-info.sh` output; run with `--no-upload` option. See the + section below about alsa-info + +If it's a regression, at best, send alsa-info outputs of both working +and non-working kernels. This is really helpful because we can +compare the codec registers directly. + +Send a bug report either the followings: + +kernel-bugzilla:: + http://bugme.linux-foundation.org/ +alsa-devel ML:: + alsa-devel@alsa-project.org + + +DEBUG TOOLS +----------- + +This section describes some tools available for debugging HD-audio +problems. + +alsa-info +~~~~~~~~~ +The script `alsa-info.sh` is a very useful tool to gather the audio +device information. You can fetch the latest version from: + +- http://www.alsa-project.org/alsa-info.sh + +Run this script as root, and it will gather the important information +such as the module lists, module parameters, proc file contents +including the codec proc files, mixer outputs and the control +elements. As default, it will store the information onto a web server +on alsa-project.org. But, if you send a bug report, it'd be better to +run with `--no-upload` option, and attach the generated file. + +There are some other useful options. See `--help` option output for +details. + + +hda-verb +~~~~~~~~ +hda-verb is a tiny program that allows you to access the HD-audio +codec directly. It executes a HD-audio codec verb directly. +This program accesses the hwdep device, thus you need to enable the +kernel config `CONFIG_SND_HDA_HWDEP=y` beforehand. + +The hda-verb program takes four arguments: the hwdep device file, the +widget NID, the verb and the parameter. When you access to the codec +on the slot 2 of the card 0, pass /dev/snd/hwC0D2 to the first +argument, typically. (However, the real path name depends on the +system.) + +The second parameter is the widget number-id to access. The third +parameter can be either a hex/digit number or a string corresponding +to a verb. Similarly, the last parameter is the value to write, or +can be a string for the parameter type. + +------------------------------------------------------------------------ + % hda-verb /dev/snd/hwC0D0 0x12 0x701 2 + nid = 0x12, verb = 0x701, param = 0x2 + value = 0x0 + + % hda-verb /dev/snd/hwC0D0 0x0 PARAMETERS VENDOR_ID + nid = 0x0, verb = 0xf00, param = 0x0 + value = 0x10ec0262 + + % hda-verb /dev/snd/hwC0D0 2 set_a 0xb080 + nid = 0x2, verb = 0x300, param = 0xb080 + value = 0x0 +------------------------------------------------------------------------ + +Although you can issue any verbs with this program, the driver state +won't be always updated. For example, the volume values are usually +cached in the driver, and thus changing the widget amp value directly +via hda-verb won't change the mixer value. + +The hda-verb program is found in the ftp directory: + +- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/ + +Also a git repository is available: + +- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/hda-verb.git + +See README file in the tarball for more details about hda-verb +program. + + +hda-analyzer +~~~~~~~~~~~~ +hda-analyzer provides a graphical interface to access the raw HD-audio +control, based on pyGTK2 binding. It's a more powerful version of +hda-verb. The program gives you a easy-to-use GUI stuff for showing +the widget information and adjusting the amp values, as well as the +proc-compatible output. + +The hda-analyzer is a part of alsa.git repository in +alsa-project.org: + +- http://git.alsa-project.org/?p=alsa.git;a=tree;f=hda-analyzer + + +hda-emu +~~~~~~~ +hda-emu is a HD-audio emulator. The main purpose of this program is +to debug an HD-audio codec without the real hardware. Thus, it +doesn't emulate the behavior with the real audio I/O, but it just +dumps the codec register changes and the ALSA-driver internal changes +at probing and operating the HD-audio driver. + +The program requires a codec proc-file to simulate. Get a proc file +for the target codec beforehand, or pick up an example codec from the +codec proc collections in the tarball. Then, run the program with the +proc file, and the hda-emu program will start parsing the codec file +and simulates the HD-audio driver: + +------------------------------------------------------------------------ + % hda-emu codecs/stac9200-dell-d820-laptop + # Parsing.. + hda_codec: Unknown model for STAC9200, using BIOS defaults + hda_codec: pin nid 08 bios pin config 40c003fa + .... +------------------------------------------------------------------------ + +The program gives you only a very dumb command-line interface. You +can get a proc-file dump at the current state, get a list of control +(mixer) elements, set/get the control element value, simulate the PCM +operation, the jack plugging simulation, etc. + +The package is found in: + +- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/ + +A git repository is available: + +- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/hda-emu.git + +See README file in the tarball for more details about hda-emu +program. -- cgit v1.2.3 From 4e7c4d7b6d980264194c2aecbbb1e1e4c7302b63 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 4 Dec 2008 10:25:37 +0100 Subject: ALSA: hda - Add reference to HD-Audio.txt in ALSA-Configuration.txt Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3cd2ad958176..3f2bdd533c3f 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -778,6 +778,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. specify a certain model in such a case. There are different models depending on the codec chip. + See Documentation/sound/alsa/HD-Audio.txt for some details. + Model name Description ---------- ----------- ALC880 -- cgit v1.2.3 From 30bc4481de890e97dc001ee123761d89638cbc50 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 9 Dec 2008 08:23:45 +0100 Subject: ALSA: Updates about bug-reporting in ALSA-Configuration.txt Updated the information about bug-reporting for HD-audio. Mentioned alsa-info.sh and kernel bugzilla. Removed ALSA BTS address not to flood the unhandled reports any more. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3f2bdd533c3f..1c7334a3054e 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1091,8 +1091,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. "codec-patch". It's sometimes good for testing and debugging. If the default configuration doesn't work and one of the above - matches with your device, report it together with the PCI - subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel + matches with your device, report it together with alsa-info.sh + output (with --no-upload option) to kernel bugzilla or alsa-devel ML (see the section "Links and Addresses"). power_save and power_save_controller options are for power-saving @@ -2409,8 +2409,11 @@ Links and Addresses ALSA project homepage http://www.alsa-project.org - ALSA Bug Tracking System - https://bugtrack.alsa-project.org/bugs/ + Kernel Bugzilla + http://bugzilla.kernel.org/ ALSA Developers ML mailto:alsa-devel@alsa-project.org + + alsa-info.sh script + http://www.alsa-project.org/alsa-info.sh -- cgit v1.2.3 From d2afbe78a2922929ad44882d3583d938b9949a30 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 10 Dec 2008 09:28:15 +0100 Subject: ALSA: hda - Update documentation Minor typo-fixes and improvements on HD-Audio.txt. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 159 ++++++++++++++++++---------------- 1 file changed, 83 insertions(+), 76 deletions(-) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index e758f24017bf..ca8187de52d8 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -9,22 +9,25 @@ GENERAL HD-audio is the new standard on-board audio component on modern PCs after AC97. Although Linux has been supporting HD-audio since long time ago, there are often problems with new machines. A part of the -problem is broken BIOS, and rest is the driver implementation. This -document explains the trouble-shooting and debugging methods for the -HD-audio hardware. +problem is broken BIOS, and the rest is the driver implementation. +This document explains the brief trouble-shooting and debugging +methods for the HD-audio hardware. The HD-audio component consists of two parts: the controller chip and the codec chips on the HD-audio bus. Linux provides a single driver -for all controllers, snd-hda-intel. Since the HD-audio controllers -are supposed to be compatible, the single snd-hda-driver should work -in most cases. But, not surprisingly, there are known bugs and issues -specific to each controller type. The snd-hda-intel driver has a -bunch of workarounds for these as described below. +for all controllers, snd-hda-intel. Although the driver name contains +a word of a well-known harware vendor, it's not specific to it but for +all controller chips by other companies. Since the HD-audio +controllers are supposed to be compatible, the single snd-hda-driver +should work in most cases. But, not surprisingly, there are known +bugs and issues specific to each controller type. The snd-hda-intel +driver has a bunch of workarounds for these as described below. A controller may have multiple codecs. Usually you have one audio -codec and optionally one modem codec. In some cases, there can be -multiple audio codecs, e.g. for analog and digital outputs, but the -driver might not work properly. +codec and optionally one modem codec. In theory, there might be +multiple audio codecs, e.g. for analog and digital outputs, and the +driver might not work properly because of conflict of mixer elements. +This should be fixed in future if such hardware really exists. The snd-hda-intel driver has several different codec parsers depending on the codec. It has a generic parser as a fallback, but this @@ -48,15 +51,16 @@ DMA-Position Problem The most common problem of the controller is the inaccurate DMA pointer reporting. The DMA pointer for playback and capture can be read in two ways, either via a LPIB register or via a position-buffer -map. As default the driver tries to reads from the io-mapped -position-buffer, and falls back to LPIB if it appears unupdated. -However, this detection isn't perfect on some devices. In such a -case, you can change the default method via `position_fix` option. +map. As default the driver tries to read from the io-mapped +position-buffer, and falls back to LPIB if the position-buffer appears +dead. However, this detection isn't perfect on some devices. In such +a case, you can change the default method via `position_fix` option. `position_fix=1` means to use LPIB method explicitly. `position_fix=2` means to use the position-buffer. 0 is the default -value, the automatic check. If you get a problem of repeated sounds, -this option might help. +value, the automatic check and fallback to LPIB as described in the +above. If you get a problem of repeated sounds, this option might +help. In addition to that, every controller is known to be broken regarding the wake-up timing. It wakes up a few samples before actually @@ -67,9 +71,9 @@ via `bdl_pos_adj` option. When `bdl_pos_adj` is a negative value (as default), it's assigned to an appropriate value depending on the controller chip. For Intel -chip, it'd be 1 while it'd be 32 for others. Usually this works. +chips, it'd be 1 while it'd be 32 for others. Usually this works. Only in case it doesn't work and you get warning messages, you should -change to other values. +change this parameter to other values. Codec-Probing Problem @@ -77,13 +81,13 @@ Codec-Probing Problem A less often but a more severe problem is the codec probing. When BIOS reports the available codec slots wrongly, the driver gets confused and tries to access the non-existing codec slot. This often -results in the total screw-up, and destruct the further communication -with the codec chips. The symptom appears usually as the error -message like: +results in the total screw-up, and destructs the further communication +with the codec chips. The symptom appears usually as error messages +like: ------------------------------------------------------------------------ - hda_intel: azx_get_response timeout, switching to polling mode: \ + hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x12345678 - hda_intel: azx_get_response timeout, switching to single_cmd mode: \ + hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x12345678 ------------------------------------------------------------------------ @@ -98,9 +102,9 @@ accessing a non-existing codec slot. Thus, if the second error message appears, try to narrow the probed codec slots via `probe_mask` option. It's a bitmask, and each bit -corresponding to the codec slot. For example, to probe only the -first slot, pass `probe_mask=1`. For the first and the third slots, -pass `probe_mask=5` (where 5 = 1 | 4), and so on. +corresponds to the codec slot. For example, to probe only the first +slot, pass `probe_mask=1`. For the first and the third slots, pass +`probe_mask=5` (where 5 = 1 | 4), and so on. Since 2.6.29 kernel, the driver has a more robust probing method, so this error might happen rarely, though. @@ -119,10 +123,10 @@ HD-AUDIO CODEC Model Option ~~~~~~~~~~~~ -The most common problems with the HD-audio driver is the unsupported -codec features or the mismatched device configuration. Most of -codec-specific code has several preset models, either to override the -BIOS setup or to provide more comprehensive features. +The most common problem regarding the HD-audio driver is the +unsupported codec features or the mismatched device configuration. +Most of codec-specific code has several preset models, either to +override the BIOS setup or to provide more comprehensive features. The driver checks PCI SSID and looks through the static configuration table until any matching entry is found. If you have a new machine, @@ -130,44 +134,44 @@ you may see a message like below: ------------------------------------------------------------------------ hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... ------------------------------------------------------------------------ -Even if you such a message, DON'T PANIC. Take a deep breath (and keep -your towel). First of all, it's an informational message, no warning, -no error. This means that the PCI SSID of your device isn't listed in -the known preset model list. But, this doesn't mean that the driver -is broken. Many codec-driver provides the automatic configuration -based on the BIOS setup. +Even if you see such a message, DON'T PANIC. Take a deep breath and +keep your towel. First of all, it's an informational message, no +warning, no error. This means that the PCI SSID of your device isn't +listed in the known preset model (white-)list. But, this doesn't mean +that the driver is broken. Many codec-drivers provide the automatic +configuration mechanism based on the BIOS setup. The HD-audio codec has usually "pin" widgets, and BIOS sets the default configuration of each pin, which indicates the location, the connection type, the jack color, etc. The HD-audio driver can guess the right connection judging from these default configuration values. -However -- some codec support codes, such as patch_analog.c, don't +However -- some codec-support codes, such as patch_analog.c, don't support the automatic probing (yet as of 2.6.28). And, BIOS is often, yes, pretty often broken. It sets up wrong values and screws up the driver. -The preset model is provided basically to override such a situation. -When the matching preset model is found in the list, the driver +The preset model is provided basically to overcome such a situation. +When the matching preset model is found in the white-list, the driver assumes the static configuration of that preset and builds the mixer -and PCM based on the static information. Thus, if you have a newer -machine with a slightly different PCI SSID from the existing one, you -may have a good chance to re-use the same model. You can pass the -`model` option to specify the preset model instead of PCI SSID -look-up. +elements and PCM streams based on the static information. Thus, if +you have a newer machine with a slightly different PCI SSID from the +existing one, you may have a good chance to re-use the same model. +You can pass the `model` option to specify the preset model instead of +PCI SSID look-up. What `model` option values are available depends on the codec chip. Check your codec chip from the codec proc file (see "Codec Proc-File" section below). It will show the vendor/product name of your codec -chip. Then, see Documentation/sound/alsa/ALSA-Configuration.txt file. -In the section of HD-audio driver, you can find a list of codecs and -`model` options belonging to each codec. For example, for Realtek +chip. Then, see Documentation/sound/alsa/ALSA-Configuration.txt +file, the section of HD-audio driver. You can find a list of codecs +and `model` options belonging to each codec. For example, for Realtek ALC262 codec chip, pass `model=ultra` for devices that are compatible with Samsung Q1 Ultra. -Thus, the first thing you can do for any brand-new, unsupported -HD-audio hardware is to check HD-audio codec and several different -`model` option values. If you have a luck, some of them might suit -with your device well. +Thus, the first thing you can do for any brand-new, unsupported and +non-working HD-audio hardware is to check HD-audio codec and several +different `model` option values. If you have a luck, some of them +might suit with your device well. Some codecs such as ALC880 have a special model option `model=test`. This configures the driver to provide as many mixer controls as @@ -188,12 +192,14 @@ One of the most frequent (and obvious) bugs with HD-audio is the silent output from either or both of a built-in speaker and a headphone jack. In general, you should try a headphone output at first. A speaker output often requires more additional controls like -the amplifier. Thus a headphone output has a slightly better chance. +the external amplifier bits. Thus a headphone output has a slightly +better chance. Before making a bug report, double-check whether the mixer is set up correctly. The recent version of snd-hda-intel driver provides mostly -"Master" volume control as well as "Front" volume. In addition, there -are individual "Headphone" and "Speaker" controls. +"Master" volume control as well as "Front" volume (where Front +indicates the front-channels). In addition, there can be individual +"Headphone" and "Speaker" controls. Ditto for the speaker output. There can be "External Amplifier" switch on some codecs. Turn on this if present. @@ -214,7 +220,7 @@ following: external amplifier. This can be set usually via EAPD verb or a certain GPIO. If the codec pin supports EAPD, you have a better chance via SET_EAPD_BTL verb (0x70c). On others, GPIO pin (mostly - it's either GPIO0 or GPIO1) can turn on/off EAPD. + it's either GPIO0 or GPIO1) may turn on/off EAPD. - Some Realtek codecs require special vendor-specific coefficients to turn on the amplifier. See patch_realtek.c. - IDT codecs may have extra power-enable/disable controls on each @@ -227,29 +233,29 @@ following: Capture Problems ~~~~~~~~~~~~~~~~ -The capture problems are often missing setups of mixers. Thus, before -submitting a bug report, make sure that you set up the mixer -correctly. For example, both "Capture Volume" and "Capture Switch" -have to be set properly in addition to the right "Capture Source" or -"Input Source" selection. Some devices have "Mic Boost" volume or -switch. +The capture problems are often because of missing setups of mixers. +Thus, before submitting a bug report, make sure that you set up the +mixer correctly. For example, both "Capture Volume" and "Capture +Switch" have to be set properly in addition to the right "Capture +Source" or "Input Source" selection. Some devices have "Mic Boost" +volume or switch. When the PCM device is opened via "default" PCM (without pulse-audio plugin), you'll likely have "Digital Capture Volume" control as well. This is provided for the extra gain/attenuation of the signal in software, especially for the inputs without the hardware volume control such as digital microphones. Unless really needed, this -should be set to exactly 50%, corresponding to 0dB. When you use "hw" -PCM, i.e., a raw access PCM, this control will have no influence, -though. +should be set to exactly 50%, corresponding to 0dB -- neither extra +gain nor attenuation. When you use "hw" PCM, i.e., a raw access PCM, +this control will have no influence, though. It's known that some codecs / devices have fairly bad analog circuits, and the recorded sound contains a certain DC-offset. This is no bug of the driver. -Most of modern laptops have no analog CD-input connection. Thus, the +Most of modern laptops have no analog CD-input connection. Thus, the recording from CD input won't work in many cases although the driver -provides it as the capture source. +provides it as the capture source. Use CDDA instead. The automatic switching of the built-in and external mic per plugging is implemented on some codec models but not on every model. Partly @@ -264,7 +270,7 @@ to fight again the evil, try debugging via hitting the raw HD-audio codec verbs to the device. Some tools are available: hda-emu and hda-analyzer. The detailed description is found in the sections below. You'd need to enable hwdep for using these tools. See "Kernel -Configuration". +Configuration" section. OTHER ISSUES @@ -284,15 +290,16 @@ sure to want it. Don't forget to turn on the appropriate `CONFIG_SND_HDA_CODEC_*` options. Note that each of them corresponds to the codec chip, not the controller chip. Thus, even if lspci shows the Nvidia controller, -you may choose the option for other vendors. If you are unsure, just -choose all yes. +you may need to choose the option for other vendors. If you are +unsure, just select all yes. `CONFIG_SND_HDA_HWDEP` is a useful option for debugging the driver. When this is enabled, the driver creates hardware-dependent devices (one per each codec), and you have a raw access to the device via -hda-verb program. For example, `hwC0D2` will be created for the card -0 codec slot #2. For debug tools such as hda-verb and hda-analyzer, -the hwdep device has to be enabled. Thus, turn this on always. +these device files. For example, `hwC0D2` will be created for the +codec slot #2 of the first card (#0). For debug-tools such as +hda-verb and hda-analyzer, the hwdep device has to be enabled. +Thus, it'd be better to turn this on always. `CONFIG_SND_HDA_RECONFIG` is a new option, and this depends on the hwdep option above. When enabled, you'll have some sysfs files under @@ -436,7 +443,7 @@ details. hda-verb ~~~~~~~~ hda-verb is a tiny program that allows you to access the HD-audio -codec directly. It executes a HD-audio codec verb directly. +codec directly. You can execute a raw HD-audio codec verb with this. This program accesses the hwdep device, thus you need to enable the kernel config `CONFIG_SND_HDA_HWDEP=y` beforehand. @@ -486,7 +493,7 @@ hda-analyzer ~~~~~~~~~~~~ hda-analyzer provides a graphical interface to access the raw HD-audio control, based on pyGTK2 binding. It's a more powerful version of -hda-verb. The program gives you a easy-to-use GUI stuff for showing +hda-verb. The program gives you an easy-to-use GUI stuff for showing the widget information and adjusting the amp values, as well as the proc-compatible output. @@ -498,7 +505,7 @@ alsa-project.org: hda-emu ~~~~~~~ -hda-emu is a HD-audio emulator. The main purpose of this program is +hda-emu is an HD-audio emulator. The main purpose of this program is to debug an HD-audio codec without the real hardware. Thus, it doesn't emulate the behavior with the real audio I/O, but it just dumps the codec register changes and the ALSA-driver internal changes -- cgit v1.2.3 From 623b9f6738dee0394398564a74fdabbff00f506f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 11 Dec 2008 07:44:18 +0100 Subject: ALSA: hda - Update HD-Audio.txt MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixed typos and added a section about codecgraph. Thanks to Vedran Miletić and Daniel T Chen for suggestions. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index ca8187de52d8..ee9117eee1aa 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -266,7 +266,7 @@ submit the improvement patch to the author. Direct Debugging ~~~~~~~~~~~~~~~~ If no model option gives you a better result, and you are a touch guy -to fight again the evil, try debugging via hitting the raw HD-audio +to fight against evil, try debugging via hitting the raw HD-audio codec verbs to the device. Some tools are available: hda-emu and hda-analyzer. The detailed description is found in the sections below. You'd need to enable hwdep for using these tools. See "Kernel @@ -389,7 +389,7 @@ power-down/up depending on the device. Some of them might be solvable, but some are hard, I'm afraid. Some distros such as openSUSE enables the power-saving feature automatically when the power cable is unplugged. Thus, if you hear noises, suspect first the -power-saving. See /sys/modules/snd_hda_intel/parameters/power_save to +power-saving. See /sys/module/snd_hda_intel/parameters/power_save to check the current value. If it's non-zero, the feature is turned on. @@ -503,6 +503,19 @@ alsa-project.org: - http://git.alsa-project.org/?p=alsa.git;a=tree;f=hda-analyzer +Codecgraph +~~~~~~~~~~ +Codecgraph is a utility program to generate a graph and visualizes the +codec-node connection of a codec chip. It's especially useful when +you analyze or debug a codec without a proper datasheet. The program +parses the given codec proc file and converts to SVG via graphiz +program. + +The tarball and GIT trees are found in the web page at: + +- http://helllabs.org/codecgraph/ + + hda-emu ~~~~~~~ hda-emu is an HD-audio emulator. The main purpose of this program is -- cgit v1.2.3 From f8bbd06b17f16984328398cdecdf9302ef9bb0bf Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 11 Dec 2008 13:12:59 +0100 Subject: ALSA: hda - Fix another typo in HD-Audio.txt --- Documentation/sound/alsa/HD-Audio.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index ee9117eee1aa..2e4d031ea1fa 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -265,7 +265,7 @@ submit the improvement patch to the author. Direct Debugging ~~~~~~~~~~~~~~~~ -If no model option gives you a better result, and you are a touch guy +If no model option gives you a better result, and you are a tough guy to fight against evil, try debugging via hitting the raw HD-audio codec verbs to the device. Some tools are available: hda-emu and hda-analyzer. The detailed description is found in the sections -- cgit v1.2.3 From 132bb7c0efe82fc976b06d557f5d63536cb9fdaa Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 11 Dec 2008 15:39:52 +0100 Subject: ALSA: hda - Add development tree URLs in HD-audio.txt Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 2e4d031ea1fa..642a2b012541 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -393,6 +393,28 @@ power-saving. See /sys/module/snd_hda_intel/parameters/power_save to check the current value. If it's non-zero, the feature is turned on. +Development Tree +~~~~~~~~~~~~~~~~ +The latest development codes for HD-audio are found on sound git tree: + +- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git + +The master branch or for-next branches can be used as the main +development branches in general while the HD-audio specific patches +are committed in topic/hda branch. + +If you are using the latest Linus tree, it'd be better to pull the +above GIT tree onto it. If you are using the older kernels, an easy +way to try the latest ALSA code is to build from the snapshot +tarball. There are daily tarballs and the latest snapshot tarball. +All can be built just like normal alsa-driver release packages, that +is, installed via the usual spells: configure, make and make +install(-modules). See INSTALL in the package. The snapshot tarballs +are found at: + +- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/ + + Sending a Bug Report ~~~~~~~~~~~~~~~~~~~~ If any model or module options don't work for your device, it's time -- cgit v1.2.3 From cae51176c1082ecb59706056910f8a217d433981 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 19 Dec 2008 08:36:53 +0100 Subject: ALSA: split HD-audio model list to HD-Audio-Models.txt Split the list of model option values to a separate file, HD-Audio-Models.txt, from ALSA-Configuration.txt. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 323 +--------------------- Documentation/sound/alsa/HD-Audio-Models.txt | 348 ++++++++++++++++++++++++ 2 files changed, 353 insertions(+), 318 deletions(-) create mode 100644 Documentation/sound/alsa/HD-Audio-Models.txt (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index d5b6b1171035..a4f3a22caba3 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -772,328 +772,15 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This module supports multiple cards and autoprobe. + See Documentation/sound/alsa/HD-Audio.txt for more details about + HD-audio driver. + Each codec may have a model table for different configurations. If your machine isn't listed there, the default (usually minimal) configuration is set up. You can pass "model=" option to specify a certain model in such a case. There are different - models depending on the codec chip. - - See Documentation/sound/alsa/HD-Audio.txt for some details. - - Model name Description - ---------- ----------- - ALC880 - 3stack 3-jack in back and a headphone out - 3stack-digout 3-jack in back, a HP out and a SPDIF out - 5stack 5-jack in back, 2-jack in front - 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out - 6stack 6-jack in back, 2-jack in front - 6stack-digout 6-jack with a SPDIF out - w810 3-jack - z71v 3-jack (HP shared SPDIF) - asus 3-jack (ASUS Mobo) - asus-w1v ASUS W1V - asus-dig ASUS with SPDIF out - asus-dig2 ASUS with SPDIF out (using GPIO2) - uniwill 3-jack - fujitsu Fujitsu Laptops (Pi1536) - F1734 2-jack - lg LG laptop (m1 express dual) - lg-lw LG LW20/LW25 laptop - tcl TCL S700 - clevo Clevo laptops (m520G, m665n) - medion Medion Rim 2150 - test for testing/debugging purpose, almost all controls can be - adjusted. Appearing only when compiled with - $CONFIG_SND_DEBUG=y - auto auto-config reading BIOS (default) - - ALC260 - hp HP machines - hp-3013 HP machines (3013-variant) - hp-dc7600 HP DC7600 - fujitsu Fujitsu S7020 - acer Acer TravelMate - will Will laptops (PB V7900) - replacer Replacer 672V - basic fixed pin assignment (old default model) - test for testing/debugging purpose, almost all controls can - adjusted. Appearing only when compiled with - $CONFIG_SND_DEBUG=y - auto auto-config reading BIOS (default) - - ALC262 - fujitsu Fujitsu Laptop - hp-bpc HP xw4400/6400/8400/9400 laptops - hp-bpc-d7000 HP BPC D7000 - hp-tc-t5735 HP Thin Client T5735 - hp-rp5700 HP RP5700 - benq Benq ED8 - benq-t31 Benq T31 - hippo Hippo (ATI) with jack detection, Sony UX-90s - hippo_1 Hippo (Benq) with jack detection - sony-assamd Sony ASSAMD - toshiba-s06 Toshiba S06 - toshiba-rx1 Toshiba RX1 - ultra Samsung Q1 Ultra Vista model - lenovo-3000 Lenovo 3000 y410 - nec NEC Versa S9100 - basic fixed pin assignment w/o SPDIF - auto auto-config reading BIOS (default) - - ALC267/268 - quanta-il1 Quanta IL1 mini-notebook - 3stack 3-stack model - toshiba Toshiba A205 - acer Acer laptops - acer-dmic Acer laptops with digital-mic - acer-aspire Acer Aspire One - dell Dell OEM laptops (Vostro 1200) - zepto Zepto laptops - test for testing/debugging purpose, almost all controls can - adjusted. Appearing only when compiled with - $CONFIG_SND_DEBUG=y - auto auto-config reading BIOS (default) - - ALC269 - basic Basic preset - quanta Quanta FL1 - eeepc-p703 ASUS Eeepc P703 P900A - eeepc-p901 ASUS Eeepc P901 S101 - fujitsu FSC Amilo - auto auto-config reading BIOS (default) - - ALC662/663 - 3stack-dig 3-stack (2-channel) with SPDIF - 3stack-6ch 3-stack (6-channel) - 3stack-6ch-dig 3-stack (6-channel) with SPDIF - 6stack-dig 6-stack with SPDIF - lenovo-101e Lenovo laptop - eeepc-p701 ASUS Eeepc P701 - eeepc-ep20 ASUS Eeepc EP20 - ecs ECS/Foxconn mobo - m51va ASUS M51VA - g71v ASUS G71V - h13 ASUS H13 - g50v ASUS G50V - asus-mode1 ASUS - asus-mode2 ASUS - asus-mode3 ASUS - asus-mode4 ASUS - asus-mode5 ASUS - asus-mode6 ASUS - auto auto-config reading BIOS (default) - - ALC882/885 - 3stack-dig 3-jack with SPDIF I/O - 6stack-dig 6-jack digital with SPDIF I/O - arima Arima W820Di1 - targa Targa T8, MSI-1049 T8 - asus-a7j ASUS A7J - asus-a7m ASUS A7M - macpro MacPro support - mbp3 Macbook Pro rev3 - imac24 iMac 24'' with jack detection - w2jc ASUS W2JC - auto auto-config reading BIOS (default) - - ALC883/888 - 3stack-dig 3-jack with SPDIF I/O - 6stack-dig 6-jack digital with SPDIF I/O - 3stack-6ch 3-jack 6-channel - 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O - 6stack-dig-demo 6-jack digital for Intel demo board - acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc) - acer-aspire Acer Aspire 9810 - acer-aspire-4930g Acer Aspire 4930G - medion Medion Laptops - medion-md2 Medion MD2 - targa-dig Targa/MSI - targa-2ch-dig Targs/MSI with 2-channel - laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE) - lenovo-101e Lenovo 101E - lenovo-nb0763 Lenovo NB0763 - lenovo-ms7195-dig Lenovo MS7195 - lenovo-sky Lenovo Sky - haier-w66 Haier W66 - 3stack-hp HP machines with 3stack (Lucknow, Samba boards) - 6stack-dell Dell machines with 6stack (Inspiron 530) - mitac Mitac 8252D - clevo-m720 Clevo M720 laptop series - fujitsu-pi2515 Fujitsu AMILO Pi2515 - fujitsu-xa3530 Fujitsu AMILO XA3530 - 3stack-6ch-intel Intel DG33* boards - auto auto-config reading BIOS (default) - - ALC861/660 - 3stack 3-jack - 3stack-dig 3-jack with SPDIF I/O - 6stack-dig 6-jack with SPDIF I/O - 3stack-660 3-jack (for ALC660) - uniwill-m31 Uniwill M31 laptop - toshiba Toshiba laptop support - asus Asus laptop support - asus-laptop ASUS F2/F3 laptops - auto auto-config reading BIOS (default) - - ALC861VD/660VD - 3stack 3-jack - 3stack-dig 3-jack with SPDIF OUT - 6stack-dig 6-jack with SPDIF OUT - 3stack-660 3-jack (for ALC660VD) - 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD) - lenovo Lenovo 3000 C200 - dallas Dallas laptops - hp HP TX1000 - asus-v1s ASUS V1Sn - auto auto-config reading BIOS (default) - - CMI9880 - minimal 3-jack in back - min_fp 3-jack in back, 2-jack in front - full 6-jack in back, 2-jack in front - full_dig 6-jack in back, 2-jack in front, SPDIF I/O - allout 5-jack in back, 2-jack in front, SPDIF out - auto auto-config reading BIOS (default) - - AD1882 / AD1882A - 3stack 3-stack mode (default) - 6stack 6-stack mode - - AD1884A / AD1883 / AD1984A / AD1984B - desktop 3-stack desktop (default) - laptop laptop with HP jack sensing - mobile mobile devices with HP jack sensing - thinkpad Lenovo Thinkpad X300 - - AD1884 - N/A - - AD1981 - basic 3-jack (default) - hp HP nx6320 - thinkpad Lenovo Thinkpad T60/X60/Z60 - toshiba Toshiba U205 - - AD1983 - N/A - - AD1984 - basic default configuration - thinkpad Lenovo Thinkpad T61/X61 - dell Dell T3400 - - AD1986A - 6stack 6-jack, separate surrounds (default) - 3stack 3-stack, shared surrounds - laptop 2-channel only (FSC V2060, Samsung M50) - laptop-eapd 2-channel with EAPD (ASUS A6J) - laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100) - ultra 2-channel with EAPD (Samsung Ultra tablet PC) - samsung 2-channel with EAPD (Samsung R65) - - AD1988/AD1988B/AD1989A/AD1989B - 6stack 6-jack - 6stack-dig ditto with SPDIF - 3stack 3-jack - 3stack-dig ditto with SPDIF - laptop 3-jack with hp-jack automute - laptop-dig ditto with SPDIF - auto auto-config reading BIOS (default) - - Conexant 5045 - laptop-hpsense Laptop with HP sense (old model laptop) - laptop-micsense Laptop with Mic sense (old model fujitsu) - laptop-hpmicsense Laptop with HP and Mic senses - benq Benq R55E - test for testing/debugging purpose, almost all controls - can be adjusted. Appearing only when compiled with - $CONFIG_SND_DEBUG=y - - Conexant 5047 - laptop Basic Laptop config - laptop-hp Laptop config for some HP models (subdevice 30A5) - laptop-eapd Laptop config with EAPD support - test for testing/debugging purpose, almost all controls - can be adjusted. Appearing only when compiled with - $CONFIG_SND_DEBUG=y - - Conexant 5051 - laptop Basic Laptop config (default) - hp HP Spartan laptop - - STAC9200 - ref Reference board - dell-d21 Dell (unknown) - dell-d22 Dell (unknown) - dell-d23 Dell (unknown) - dell-m21 Dell Inspiron 630m, Dell Inspiron 640m - dell-m22 Dell Latitude D620, Dell Latitude D820 - dell-m23 Dell XPS M1710, Dell Precision M90 - dell-m24 Dell Latitude 120L - dell-m25 Dell Inspiron E1505n - dell-m26 Dell Inspiron 1501 - dell-m27 Dell Inspiron E1705/9400 - gateway Gateway laptops with EAPD control - panasonic Panasonic CF-74 - - STAC9205/9254 - ref Reference board - dell-m42 Dell (unknown) - dell-m43 Dell Precision - dell-m44 Dell Inspiron - - STAC9220/9221 - ref Reference board - 3stack D945 3stack - 5stack D945 5stack + SPDIF - intel-mac-v1 Intel Mac Type 1 - intel-mac-v2 Intel Mac Type 2 - intel-mac-v3 Intel Mac Type 3 - intel-mac-v4 Intel Mac Type 4 - intel-mac-v5 Intel Mac Type 5 - intel-mac-auto Intel Mac (detect type according to subsystem id) - macmini Intel Mac Mini (equivalent with type 3) - macbook Intel Mac Book (eq. type 5) - macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3) - macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3) - imac-intel Intel iMac (eq. type 2) - imac-intel-20 Intel iMac (newer version) (eq. type 3) - dell-d81 Dell (unknown) - dell-d82 Dell (unknown) - dell-m81 Dell (unknown) - dell-m82 Dell XPS M1210 - - STAC9202/9250/9251 - ref Reference board, base config - m2-2 Some Gateway MX series laptops - m6 Some Gateway NX series laptops - pa6 Gateway NX860 series - - STAC9227/9228/9229/927x - ref Reference board - ref-no-jd Reference board without HP/Mic jack detection - 3stack D965 3stack - 5stack D965 5stack + SPDIF - dell-3stack Dell Dimension E520 - dell-bios Fixes with Dell BIOS setup - - STAC92HD71B* - ref Reference board - dell-m4-1 Dell desktops - dell-m4-2 Dell desktops - dell-m4-3 Dell desktops - - STAC92HD73* - ref Reference board - no-jd BIOS setup but without jack-detection - dell-m6-amic Dell desktops/laptops with analog mics - dell-m6-dmic Dell desktops/laptops with digital mics - dell-m6 Dell desktops/laptops with both type of mics - - STAC9872 - vaio Setup for VAIO FE550G/SZ110 - vaio-ar Setup for VAIO AR + models depending on the codec chip. The list of available models + is found in HD-Audio-Models.txt The model name "genric" is treated as a special case. When this model is given, the driver uses the generic codec parser without diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt new file mode 100644 index 000000000000..4b7ac21ea9eb --- /dev/null +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -0,0 +1,348 @@ + Model name Description + ---------- ----------- +ALC880 +====== + 3stack 3-jack in back and a headphone out + 3stack-digout 3-jack in back, a HP out and a SPDIF out + 5stack 5-jack in back, 2-jack in front + 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out + 6stack 6-jack in back, 2-jack in front + 6stack-digout 6-jack with a SPDIF out + w810 3-jack + z71v 3-jack (HP shared SPDIF) + asus 3-jack (ASUS Mobo) + asus-w1v ASUS W1V + asus-dig ASUS with SPDIF out + asus-dig2 ASUS with SPDIF out (using GPIO2) + uniwill 3-jack + fujitsu Fujitsu Laptops (Pi1536) + F1734 2-jack + lg LG laptop (m1 express dual) + lg-lw LG LW20/LW25 laptop + tcl TCL S700 + clevo Clevo laptops (m520G, m665n) + medion Medion Rim 2150 + test for testing/debugging purpose, almost all controls can be + adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y + auto auto-config reading BIOS (default) + +ALC260 +====== + hp HP machines + hp-3013 HP machines (3013-variant) + hp-dc7600 HP DC7600 + fujitsu Fujitsu S7020 + acer Acer TravelMate + will Will laptops (PB V7900) + replacer Replacer 672V + basic fixed pin assignment (old default model) + test for testing/debugging purpose, almost all controls can + adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y + auto auto-config reading BIOS (default) + +ALC262 +====== + fujitsu Fujitsu Laptop + hp-bpc HP xw4400/6400/8400/9400 laptops + hp-bpc-d7000 HP BPC D7000 + hp-tc-t5735 HP Thin Client T5735 + hp-rp5700 HP RP5700 + benq Benq ED8 + benq-t31 Benq T31 + hippo Hippo (ATI) with jack detection, Sony UX-90s + hippo_1 Hippo (Benq) with jack detection + sony-assamd Sony ASSAMD + toshiba-s06 Toshiba S06 + toshiba-rx1 Toshiba RX1 + ultra Samsung Q1 Ultra Vista model + lenovo-3000 Lenovo 3000 y410 + nec NEC Versa S9100 + basic fixed pin assignment w/o SPDIF + auto auto-config reading BIOS (default) + +ALC267/268 +========== + quanta-il1 Quanta IL1 mini-notebook + 3stack 3-stack model + toshiba Toshiba A205 + acer Acer laptops + acer-dmic Acer laptops with digital-mic + acer-aspire Acer Aspire One + dell Dell OEM laptops (Vostro 1200) + zepto Zepto laptops + test for testing/debugging purpose, almost all controls can + adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y + auto auto-config reading BIOS (default) + +ALC269 +====== + basic Basic preset + quanta Quanta FL1 + eeepc-p703 ASUS Eeepc P703 P900A + eeepc-p901 ASUS Eeepc P901 S101 + fujitsu FSC Amilo + auto auto-config reading BIOS (default) + +ALC662/663 +========== + 3stack-dig 3-stack (2-channel) with SPDIF + 3stack-6ch 3-stack (6-channel) + 3stack-6ch-dig 3-stack (6-channel) with SPDIF + 6stack-dig 6-stack with SPDIF + lenovo-101e Lenovo laptop + eeepc-p701 ASUS Eeepc P701 + eeepc-ep20 ASUS Eeepc EP20 + ecs ECS/Foxconn mobo + m51va ASUS M51VA + g71v ASUS G71V + h13 ASUS H13 + g50v ASUS G50V + asus-mode1 ASUS + asus-mode2 ASUS + asus-mode3 ASUS + asus-mode4 ASUS + asus-mode5 ASUS + asus-mode6 ASUS + auto auto-config reading BIOS (default) + +ALC882/885 +========== + 3stack-dig 3-jack with SPDIF I/O + 6stack-dig 6-jack digital with SPDIF I/O + arima Arima W820Di1 + targa Targa T8, MSI-1049 T8 + asus-a7j ASUS A7J + asus-a7m ASUS A7M + macpro MacPro support + mbp3 Macbook Pro rev3 + imac24 iMac 24'' with jack detection + w2jc ASUS W2JC + auto auto-config reading BIOS (default) + +ALC883/888 +========== + 3stack-dig 3-jack with SPDIF I/O + 6stack-dig 6-jack digital with SPDIF I/O + 3stack-6ch 3-jack 6-channel + 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O + 6stack-dig-demo 6-jack digital for Intel demo board + acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc) + acer-aspire Acer Aspire 9810 + acer-aspire-4930g Acer Aspire 4930G + medion Medion Laptops + medion-md2 Medion MD2 + targa-dig Targa/MSI + targa-2ch-dig Targs/MSI with 2-channel + laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE) + lenovo-101e Lenovo 101E + lenovo-nb0763 Lenovo NB0763 + lenovo-ms7195-dig Lenovo MS7195 + lenovo-sky Lenovo Sky + haier-w66 Haier W66 + 3stack-hp HP machines with 3stack (Lucknow, Samba boards) + 6stack-dell Dell machines with 6stack (Inspiron 530) + mitac Mitac 8252D + clevo-m720 Clevo M720 laptop series + fujitsu-pi2515 Fujitsu AMILO Pi2515 + fujitsu-xa3530 Fujitsu AMILO XA3530 + 3stack-6ch-intel Intel DG33* boards + auto auto-config reading BIOS (default) + +ALC861/660 +========== + 3stack 3-jack + 3stack-dig 3-jack with SPDIF I/O + 6stack-dig 6-jack with SPDIF I/O + 3stack-660 3-jack (for ALC660) + uniwill-m31 Uniwill M31 laptop + toshiba Toshiba laptop support + asus Asus laptop support + asus-laptop ASUS F2/F3 laptops + auto auto-config reading BIOS (default) + +ALC861VD/660VD +============== + 3stack 3-jack + 3stack-dig 3-jack with SPDIF OUT + 6stack-dig 6-jack with SPDIF OUT + 3stack-660 3-jack (for ALC660VD) + 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD) + lenovo Lenovo 3000 C200 + dallas Dallas laptops + hp HP TX1000 + asus-v1s ASUS V1Sn + auto auto-config reading BIOS (default) + +CMI9880 +======= + minimal 3-jack in back + min_fp 3-jack in back, 2-jack in front + full 6-jack in back, 2-jack in front + full_dig 6-jack in back, 2-jack in front, SPDIF I/O + allout 5-jack in back, 2-jack in front, SPDIF out + auto auto-config reading BIOS (default) + +AD1882 / AD1882A +================ + 3stack 3-stack mode (default) + 6stack 6-stack mode + +AD1884A / AD1883 / AD1984A / AD1984B +==================================== + desktop 3-stack desktop (default) + laptop laptop with HP jack sensing + mobile mobile devices with HP jack sensing + thinkpad Lenovo Thinkpad X300 + +AD1884 +====== + N/A + +AD1981 +====== + basic 3-jack (default) + hp HP nx6320 + thinkpad Lenovo Thinkpad T60/X60/Z60 + toshiba Toshiba U205 + +AD1983 +====== + N/A + +AD1984 +====== + basic default configuration + thinkpad Lenovo Thinkpad T61/X61 + dell Dell T3400 + +AD1986A +======= + 6stack 6-jack, separate surrounds (default) + 3stack 3-stack, shared surrounds + laptop 2-channel only (FSC V2060, Samsung M50) + laptop-eapd 2-channel with EAPD (ASUS A6J) + laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100) + ultra 2-channel with EAPD (Samsung Ultra tablet PC) + samsung 2-channel with EAPD (Samsung R65) + +AD1988/AD1988B/AD1989A/AD1989B +============================== + 6stack 6-jack + 6stack-dig ditto with SPDIF + 3stack 3-jack + 3stack-dig ditto with SPDIF + laptop 3-jack with hp-jack automute + laptop-dig ditto with SPDIF + auto auto-config reading BIOS (default) + +Conexant 5045 +============= + laptop-hpsense Laptop with HP sense (old model laptop) + laptop-micsense Laptop with Mic sense (old model fujitsu) + laptop-hpmicsense Laptop with HP and Mic senses + benq Benq R55E + test for testing/debugging purpose, almost all controls + can be adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y + +Conexant 5047 +============= + laptop Basic Laptop config + laptop-hp Laptop config for some HP models (subdevice 30A5) + laptop-eapd Laptop config with EAPD support + test for testing/debugging purpose, almost all controls + can be adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y + +Conexant 5051 +============= + laptop Basic Laptop config (default) + hp HP Spartan laptop + +STAC9200 +======== + ref Reference board + dell-d21 Dell (unknown) + dell-d22 Dell (unknown) + dell-d23 Dell (unknown) + dell-m21 Dell Inspiron 630m, Dell Inspiron 640m + dell-m22 Dell Latitude D620, Dell Latitude D820 + dell-m23 Dell XPS M1710, Dell Precision M90 + dell-m24 Dell Latitude 120L + dell-m25 Dell Inspiron E1505n + dell-m26 Dell Inspiron 1501 + dell-m27 Dell Inspiron E1705/9400 + gateway Gateway laptops with EAPD control + panasonic Panasonic CF-74 + +STAC9205/9254 +============= + ref Reference board + dell-m42 Dell (unknown) + dell-m43 Dell Precision + dell-m44 Dell Inspiron + +STAC9220/9221 +============= + ref Reference board + 3stack D945 3stack + 5stack D945 5stack + SPDIF + intel-mac-v1 Intel Mac Type 1 + intel-mac-v2 Intel Mac Type 2 + intel-mac-v3 Intel Mac Type 3 + intel-mac-v4 Intel Mac Type 4 + intel-mac-v5 Intel Mac Type 5 + intel-mac-auto Intel Mac (detect type according to subsystem id) + macmini Intel Mac Mini (equivalent with type 3) + macbook Intel Mac Book (eq. type 5) + macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3) + macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3) + imac-intel Intel iMac (eq. type 2) + imac-intel-20 Intel iMac (newer version) (eq. type 3) + dell-d81 Dell (unknown) + dell-d82 Dell (unknown) + dell-m81 Dell (unknown) + dell-m82 Dell XPS M1210 + +STAC9202/9250/9251 +================== + ref Reference board, base config + m2-2 Some Gateway MX series laptops + m6 Some Gateway NX series laptops + pa6 Gateway NX860 series + +STAC9227/9228/9229/927x +======================= + ref Reference board + ref-no-jd Reference board without HP/Mic jack detection + 3stack D965 3stack + 5stack D965 5stack + SPDIF + dell-3stack Dell Dimension E520 + dell-bios Fixes with Dell BIOS setup + +STAC92HD71B* +============ + ref Reference board + dell-m4-1 Dell desktops + dell-m4-2 Dell desktops + dell-m4-3 Dell desktops + +STAC92HD73* +=========== + ref Reference board + no-jd BIOS setup but without jack-detection + dell-m6-amic Dell desktops/laptops with analog mics + dell-m6-dmic Dell desktops/laptops with digital mics + dell-m6 Dell desktops/laptops with both type of mics + +STAC92HD83* +=========== + ref Reference board + +STAC9872 +======== + vaio Setup for VAIO FE550G/SZ110 + vaio-ar Setup for VAIO AR -- cgit v1.2.3 From 692f90421d3716ef0d0f120d9d2c9684009a4a01 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 19 Dec 2008 12:44:46 +0100 Subject: ALSA: hda - Fix HD-Audio.txt reference of model list The model list is now in HD-Audio-Models.txt. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index 642a2b012541..8d68fff71839 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -162,8 +162,8 @@ PCI SSID look-up. What `model` option values are available depends on the codec chip. Check your codec chip from the codec proc file (see "Codec Proc-File" section below). It will show the vendor/product name of your codec -chip. Then, see Documentation/sound/alsa/ALSA-Configuration.txt -file, the section of HD-audio driver. You can find a list of codecs +chip. Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file, +the section of HD-audio driver. You can find a list of codecs and `model` options belonging to each codec. For example, for Realtek ALC262 codec chip, pass `model=ultra` for devices that are compatible with Samsung Q1 Ultra. -- cgit v1.2.3 From d4d9cd0338892e7f0d65f8a110473d175535cd5d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 19 Dec 2008 15:19:11 +0100 Subject: ALSA: hda - Add probe_only option Added probe_only module option to hd-audio driver. This option specifies whether the driver creates and initializes the codec-parser after probing. When this option is set, the driver skips the codec parsing and initialization but gives you proc and other accesses. It's useful to see the initial codec state for debugging. The default of this value is off, so the default behavior is as same as before. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 2 ++ sound/pci/hda/hda_codec.c | 12 +++++++----- sound/pci/hda/hda_codec.h | 2 +- sound/pci/hda/hda_intel.c | 11 ++++++++--- 4 files changed, 18 insertions(+), 9 deletions(-) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index a4f3a22caba3..ee45454c50be 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -757,6 +757,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. model - force the model name position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF) probe_mask - Bitmask to probe codecs (default = -1, meaning all slots) + probe_only - Only probing and no codec initialization (default=off); + Useful to check the initial codec status for debugging bdl_pos_adj - Specifies the DMA IRQ timing delay in samples. Passing -1 will make the driver to choose the appropriate value based on the controller chip. diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 625fe5984dd6..e16cf63821ae 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -709,7 +709,7 @@ static void snd_hda_codec_free(struct hda_codec *codec) * Returns 0 if successful, or a negative error code. */ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr, - struct hda_codec **codecp) + int do_init, struct hda_codec **codecp) { struct hda_codec *codec; char component[31]; @@ -793,10 +793,12 @@ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr if (bus->modelname) codec->modelname = kstrdup(bus->modelname, GFP_KERNEL); - err = snd_hda_codec_configure(codec); - if (err < 0) { - snd_hda_codec_free(codec); - return err; + if (do_init) { + err = snd_hda_codec_configure(codec); + if (err < 0) { + snd_hda_codec_free(codec); + return err; + } } snd_hda_codec_proc_new(codec); diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 5587d416229f..729fc7642d7f 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -811,7 +811,7 @@ enum { int snd_hda_bus_new(struct snd_card *card, const struct hda_bus_template *temp, struct hda_bus **busp); int snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr, - struct hda_codec **codecp); + int do_init, struct hda_codec **codecp); /* * low level functions diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index a26ae8c4cf70..6613b6bef9eb 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -58,6 +58,7 @@ static char *model[SNDRV_CARDS]; static int position_fix[SNDRV_CARDS]; static int bdl_pos_adj[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1}; static int probe_mask[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1}; +static int probe_only[SNDRV_CARDS]; static int single_cmd; static int enable_msi; @@ -76,6 +77,8 @@ module_param_array(bdl_pos_adj, int, NULL, 0644); MODULE_PARM_DESC(bdl_pos_adj, "BDL position adjustment offset."); module_param_array(probe_mask, int, NULL, 0444); MODULE_PARM_DESC(probe_mask, "Bitmask to probe codecs (default = -1)."); +module_param_array(probe_only, bool, NULL, 0444); +MODULE_PARM_DESC(probe_only, "Only probing and no codec initialization."); module_param(single_cmd, bool, 0444); MODULE_PARM_DESC(single_cmd, "Use single command to communicate with codecs " "(for debugging only)."); @@ -1224,7 +1227,8 @@ static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] __devinitdata = { }; static int __devinit azx_codec_create(struct azx *chip, const char *model, - unsigned int codec_probe_mask) + unsigned int codec_probe_mask, + int no_init) { struct hda_bus_template bus_temp; int c, codecs, err; @@ -1282,7 +1286,7 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model, for (c = 0; c < max_slots; c++) { if ((chip->codec_mask & (1 << c)) & codec_probe_mask) { struct hda_codec *codec; - err = snd_hda_codec_new(chip->bus, c, &codec); + err = snd_hda_codec_new(chip->bus, c, !no_init, &codec); if (err < 0) continue; codecs++; @@ -2340,7 +2344,8 @@ static int __devinit azx_probe(struct pci_dev *pci, card->private_data = chip; /* create codec instances */ - err = azx_codec_create(chip, model[dev], probe_mask[dev]); + err = azx_codec_create(chip, model[dev], probe_mask[dev], + probe_only[dev]); if (err < 0) goto out_free; -- cgit v1.2.3