From e90dbd3839f554bef35786c4bec8276455691b20 Mon Sep 17 00:00:00 2001 From: anish kumar Date: Sat, 9 Nov 2024 11:22:31 -0800 Subject: ASoC: machine: update documentation 1. Added clocking details. 2. Updated ways to register the dai's 3. Bit more detail about card registration details. Signed-off-by: anish kumar Reviewed-by: Bagas Sanjaya Link: https://patch.msgid.link/20241109192231.11623-1-yesanishhere@gmail.com Signed-off-by: Mark Brown --- Documentation/sound/soc/machine.rst | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'Documentation/sound/soc') diff --git a/Documentation/sound/soc/machine.rst b/Documentation/sound/soc/machine.rst index 515c9444deaf..9db132bc0070 100644 --- a/Documentation/sound/soc/machine.rst +++ b/Documentation/sound/soc/machine.rst @@ -71,6 +71,18 @@ struct snd_soc_dai_link is used to set up each DAI in your machine. e.g. .ops = &corgi_ops, }; +In the above struct, dai’s are registered using names but you can pass +either dai name or device tree node but not both. Also, names used here +for cpu/codec/platform dais should be globally unique. + +Additionaly below example macro can be used to register cpu, codec and +platform dai:: + + SND_SOC_DAILINK_DEFS(wm2200_cpu_dsp, + DAILINK_COMP_ARRAY(COMP_CPU("samsung-i2s.0")), + DAILINK_COMP_ARRAY(COMP_CODEC("spi0.0", "wm0010-sdi1")), + DAILINK_COMP_ARRAY(COMP_PLATFORM("samsung-i2s.0"))); + struct snd_soc_card then sets up the machine with its DAIs. e.g. :: @@ -81,6 +93,10 @@ struct snd_soc_card then sets up the machine with its DAIs. e.g. .num_links = 1, }; +Following this, ``devm_snd_soc_register_card`` can be used to register +the sound card. During the registration, the individual components +such as the codec, CPU, and platform are probed. If all these components +are successfully probed, the sound card gets registered. Machine Power Map ----------------- @@ -95,3 +111,13 @@ Machine Controls ---------------- Machine specific audio mixer controls can be added in the DAI init function. + + +Clocking Controls +----------------- + +As previously noted, clock configuration is handled within the machine driver. +For details on the clock APIs that the machine driver can utilize for +setup, please refer to Documentation/sound/soc/clocking.rst. However, the +callback needs to be registered by the CPU/Codec/Platform drivers to configure +the clocks that is needed for the corresponding device operation. -- cgit v1.2.3