From 7e42626ad3f4540143e68ba41e5e553f2715b451 Mon Sep 17 00:00:00 2001 From: Honghui Zhang Date: Wed, 8 Jun 2016 17:50:57 +0800 Subject: dt-bindings: mediatek: add descriptions for mediatek mt2701 iommu and smi This patch defines the local arbitor port IDs for mediatek SoC MT2701 and add descriptions of binding for mediatek generation one iommu and smi. Signed-off-by: Honghui Zhang Acked-by: Rob Herring Signed-off-by: Joerg Roedel --- .../devicetree/bindings/iommu/mediatek,iommu.txt | 13 +++++++++---- .../memory-controllers/mediatek,smi-common.txt | 21 ++++++++++++++++++--- .../memory-controllers/mediatek,smi-larb.txt | 4 +++- 3 files changed, 30 insertions(+), 8 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt index cd1b1cd7b5c4..53c20cae309f 100644 --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt @@ -1,7 +1,9 @@ * Mediatek IOMMU Architecture Implementation - Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U) which -uses the ARM Short-Descriptor translation table format for address translation. + Some Mediatek SOCs contain a Multimedia Memory Management Unit (M4U), and +this M4U have two generations of HW architecture. Generation one uses flat +pagetable, and only supports 4K size page mapping. Generation two uses the +ARM Short-Descriptor translation table format for address translation. About the M4U Hardware Block Diagram, please check below: @@ -36,7 +38,9 @@ in each larb. Take a example, There are many ports like MC, PP, VLD in the video decode local arbiter, all these ports are according to the video HW. Required properties: -- compatible : must be "mediatek,mt8173-m4u". +- compatible : must be one of the following string: + "mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW. + "mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW. - reg : m4u register base and size. - interrupts : the interrupt of m4u. - clocks : must contain one entry for each clock-names. @@ -46,7 +50,8 @@ Required properties: according to the local arbiter index, like larb0, larb1, larb2... - iommu-cells : must be 1. This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as defined in - dt-binding/memory/mt8173-larb-port.h. + dt-binding/memory/mt2701-larb-port.h for mt2701 and + dt-binding/memory/mt8173-larb-port.h for mt8173 Example: iommu: iommu@10205000 { diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt index 06a83ceebba7..aa614b2d7cab 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt @@ -2,16 +2,31 @@ SMI (Smart Multimedia Interface) Common The hardware block diagram please check bindings/iommu/mediatek,iommu.txt +Mediatek SMI have two generations of HW architecture, mt8173 uses the second +generation of SMI HW while mt2701 uses the first generation HW of SMI. + +There's slight differences between the two SMI, for generation 2, the +register which control the iommu port is at each larb's register base. But +for generation 1, the register is at smi ao base(smi always on register +base). Besides that, the smi async clock should be prepared and enabled for +SMI generation 1 to transform the smi clock into emi clock domain, but that is +not needed for SMI generation 2. + Required properties: -- compatible : must be "mediatek,mt8173-smi-common" +- compatible : must be one of : + "mediatek,mt2701-smi-common" + "mediatek,mt8173-smi-common" - reg : the register and size of the SMI block. - power-domains : a phandle to the power domain of this local arbiter. - clocks : Must contain an entry for each entry in clock-names. -- clock-names : must contain 2 entries, as follows: +- clock-names : must contain 3 entries for generation 1 smi HW and 2 entries + for generation 2 smi HW as follows: - "apb" : Advanced Peripheral Bus clock, It's the clock for setting the register. - "smi" : It's the clock for transfer data and command. - They may be the same if both source clocks are the same. + They may be the same if both source clocks are the same. + - "async" : asynchronous clock, it help transform the smi clock into the emi + clock domain, this clock is only needed by generation 1 smi HW. Example: smi_common: smi@14022000 { diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt index 55ff3b7e0bb9..21277a56e94c 100644 --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt @@ -3,7 +3,9 @@ SMI (Smart Multimedia Interface) Local Arbiter The hardware block diagram please check bindings/iommu/mediatek,iommu.txt Required properties: -- compatible : must be "mediatek,mt8173-smi-larb" +- compatible : must be one of : + "mediatek,mt8173-smi-larb" + "mediatek,mt2701-smi-larb" - reg : the register and size of this local arbiter. - mediatek,smi : a phandle to the smi_common node. - power-domains : a phandle to the power domain of this local arbiter. -- cgit v1.2.3 From 00c698e09e6b8d1008d0686330c6ec3904ea6bb2 Mon Sep 17 00:00:00 2001 From: Sricharan R Date: Mon, 13 Jun 2016 17:06:03 +0530 Subject: documentation: iommu: Add bindings for msm,iommu-v0 ip The MSM IOMMU is an implementation compatible with the ARM VMSA short descriptor page tables. It provides address translation for bus masters outside of the CPU, each connected to the IOMMU through a port called micro-TLB. Adding the DT bindings for the same. Signed-off-by: Sricharan R Acked-by: Rob Herring Signed-off-by: Joerg Roedel --- .../devicetree/bindings/iommu/msm,iommu-v0.txt | 64 ++++++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100644 Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt new file mode 100644 index 000000000000..20236385f26e --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt @@ -0,0 +1,64 @@ +* QCOM IOMMU + +The MSM IOMMU is an implementation compatible with the ARM VMSA short +descriptor page tables. It provides address translation for bus masters outside +of the CPU, each connected to the IOMMU through a port called micro-TLB. + +Required Properties: + + - compatible: Must contain "qcom,apq8064-iommu". + - reg: Base address and size of the IOMMU registers. + - interrupts: Specifiers for the MMU fault interrupts. For instances that + support secure mode two interrupts must be specified, for non-secure and + secure mode, in that order. For instances that don't support secure mode a + single interrupt must be specified. + - #iommu-cells: The number of cells needed to specify the stream id. This + is always 1. + - qcom,ncb: The total number of context banks in the IOMMU. + - clocks : List of clocks to be used during SMMU register access. See + Documentation/devicetree/bindings/clock/clock-bindings.txt + for information about the format. For each clock specified + here, there must be a corresponding entry in clock-names + (see below). + + - clock-names : List of clock names corresponding to the clocks specified in + the "clocks" property (above). + Should be "smmu_pclk" for specifying the interface clock + required for iommu's register accesses. + Should be "smmu_clk" for specifying the functional clock + required by iommu for bus accesses. + +Each bus master connected to an IOMMU must reference the IOMMU in its device +node with the following property: + + - iommus: A reference to the IOMMU in multiple cells. The first cell is a + phandle to the IOMMU and the second cell is the stream id. + A single master device can be connected to more than one iommu + and multiple contexts in each of the iommu. So multiple entries + are required to list all the iommus and the stream ids that the + master is connected to. + +Example: mdp iommu and its bus master + + mdp_port0: iommu@7500000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "smmu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc MDP_AXI_CLK>; + reg = <0x07500000 0x100000>; + interrupts = + , + ; + qcom,ncb = <2>; + }; + + mdp: qcom,mdp@5100000 { + compatible = "qcom,mdp"; + ... + iommus = <&mdp_port0 0 + &mdp_port0 2>; + }; -- cgit v1.2.3 From 560829b4f6c34adae82082fe86d21e7c6cdc4eaf Mon Sep 17 00:00:00 2001 From: Andrea Gelmini Date: Sat, 21 May 2016 13:38:10 +0200 Subject: iommu/arm-smmu: Fix typo in devicetree binding introductory text This may well be the world's most inconsequential patch, but there is a spelling mistake that needs fixing and Andrea was bored enough to write the patch (along with 1528 others...). Signed-off-by: Andrea Gelmini Signed-off-by: Will Deacon --- Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt index 947863acc2d4..7b94c88cf2ee 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt +++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt @@ -1,6 +1,6 @@ * ARM SMMUv3 Architecture Implementation -The SMMUv3 architecture is a significant deparature from previous +The SMMUv3 architecture is a significant departure from previous revisions, replacing the MMIO register interface with in-memory command and event queues and adding support for the ATS and PRI components of the PCIe specification. -- cgit v1.2.3