From d49850110434e25b3128a4f2f083812a111bf457 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Fri, 24 Jan 2020 09:41:30 +0100 Subject: dt-bindings: usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS Add the specific compatible string for the DWC2 IP found in the STM32MP15 SoCs. STM32MP15 SoCs uses sensing comparators to detect Vbus valid levels and ID pin state. usb33d-supply described the regulator supplying Vbus and ID sensing comparators. Signed-off-by: Amelie Delaunay Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/usb/dwc2.yaml | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index 71cf7ba32237..e95ba9373023 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -58,6 +58,8 @@ properties: - const: st,stm32f4x9-fsotg - const: st,stm32f4x9-hsotg - const: st,stm32f7-hsotg + - const: st,stm32mp15-fsotg + - const: st,stm32mp15-hsotg - const: samsung,s3c6400-hsotg reg: @@ -103,6 +105,10 @@ properties: vusb_a-supply: description: phandle to voltage regulator of analog section. + vusb33d-supply: + description: reference to the VBUS and ID sensing comparators supply, in + order to perform OTG operation, used on STM32MP15 SoCs. + dr_mode: enum: [host, peripheral, otg] -- cgit v1.2.3 From 17ff9478ffa3ade728d0fd7351720bb215dcbf7f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 27 Jan 2020 03:20:21 +0100 Subject: dt-bindings: Add ITE Tech prefix Add vendor prefix for ITE Tech Inc, http://www.ite.com.tw/ Signed-off-by: Marek Vasut Cc: Daniel Vetter Cc: Rob Herring Cc: Sean Cross Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 9e67944bec9c..535211eeb1c5 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -469,6 +469,8 @@ patternProperties: description: Intersil "^issi,.*": description: Integrated Silicon Solutions Inc. + "^ite,.*": + description: ITE Tech, Inc. "^itead,.*": description: ITEAD Intelligent Systems Co.Ltd "^iwave,.*": -- cgit v1.2.3 From db1b4b3a7ae19d1abc6d52e9b3dc05b4bb99320f Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 27 Jan 2020 03:58:37 +0000 Subject: dt-bindings: soc: imx: add binding doc for aips bus Add binding doc for fsl,aips-bus Signed-off-by: Peng Fan Signed-off-by: Rob Herring --- .../devicetree/bindings/soc/imx/fsl,aips-bus.yaml | 47 ++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml new file mode 100644 index 000000000000..3cbf2d28a188 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,aips-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX AHB to IP Bridge + +maintainers: + - Peng Fan + +description: | + This particular peripheral is designed as the bridge between + AHB bus and peripherals with the lower bandwidth IP Slave (IPS) + buses. + +select: + properties: + compatible: + contains: + const: fsl,aips-bus + required: + - compatible + +properties: + compatible: + items: + - const: fsl,aips-bus + - const: simple-bus + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30000000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; +... -- cgit v1.2.3 From c03b401250cada0a46cdbbcef665548e576f345f Mon Sep 17 00:00:00 2001 From: Kamlesh Gurudasani Date: Mon, 27 Jan 2020 19:55:33 +0530 Subject: dt-bindings: add vendor prefix for OzzMaker and Waveshare Electronics Add vendor prefix for OzzMaker [1] and Waveshare Electronics [2] Both are display manufacturers [1] https://ozzmaker.com/about/ [2] https://www.waveshare.com/contact_us Signed-off-by: Kamlesh Gurudasani Acked-by: Sam Ravnborg Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 535211eeb1c5..ac6aa3332b28 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -729,6 +729,8 @@ patternProperties: description: OmniVision Technologies "^oxsemi,.*": description: Oxford Semiconductor, Ltd. + "^ozzmaker,.*": + description: OzzMaker "^panasonic,.*": description: Panasonic Corporation "^parade,.*": @@ -1054,6 +1056,8 @@ patternProperties: description: Vision Optical Technology Co., Ltd. "^vxt,.*": description: VXT Ltd + "^waveshare,.*": + description: Waveshare Electronics "^wd,.*": description: Western Digital Corp. "^wetek,.*": -- cgit v1.2.3 From 90aeca875f8a33da7cbcac20b7921ca090127346 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 29 Jan 2020 09:56:13 +0100 Subject: dt-bindings: display: Convert etnaviv to json-schema Convert etnaviv bindings to yaml format. Move bindings file from display to gpu folder. Signed-off-by: Benjamin Gaignard Signed-off-by: Rob Herring --- .../bindings/display/etnaviv/etnaviv-drm.txt | 36 ----------- .../devicetree/bindings/gpu/vivante,gc.yaml | 69 ++++++++++++++++++++++ 2 files changed, 69 insertions(+), 36 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt create mode 100644 Documentation/devicetree/bindings/gpu/vivante,gc.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt deleted file mode 100644 index 8def11b16a24..000000000000 --- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt +++ /dev/null @@ -1,36 +0,0 @@ -Vivante GPU core devices -======================== - -Required properties: -- compatible: Should be "vivante,gc" - A more specific compatible is not needed, as the cores contain chip - identification registers at fixed locations, which provide all the - necessary information to the driver. -- reg: should be register base and length as documented in the - datasheet -- interrupts: Should contain the cores interrupt line -- clocks: should contain one clock for entry in clock-names - see Documentation/devicetree/bindings/clock/clock-bindings.txt -- clock-names: - - "bus": AXI/master interface clock - - "reg": AHB/slave interface clock - (only required if GPU can gate slave interface independently) - - "core": GPU core clock - - "shader": Shader clock (only required if GPU has feature PIPE_3D) - -Optional properties: -- power-domains: a power domain consumer specifier according to - Documentation/devicetree/bindings/power/power_domain.txt - -example: - -gpu_3d: gpu@130000 { - compatible = "vivante,gc"; - reg = <0x00130000 0x4000>; - interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>, - <&clks IMX6QDL_CLK_GPU3D_CORE>, - <&clks IMX6QDL_CLK_GPU3D_SHADER>; - clock-names = "bus", "core", "shader"; - power-domains = <&gpc 1>; -}; diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml new file mode 100644 index 000000000000..0bc4b38d5cbb --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/vivante,gc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Vivante GPU Bindings + +description: Vivante GPU core devices + +maintainers: + - Lucas Stach + +properties: + compatible: + const: vivante,gc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: AXI/master interface clock + - description: GPU core clock + - description: Shader clock (only required if GPU has feature PIPE_3D) + - description: AHB/slave interface clock (only required if GPU can gate slave interface independently) + minItems: 1 + maxItems: 4 + + clock-names: + items: + enum: [ bus, core, shader, reg ] + minItems: 1 + maxItems: 4 + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + gpu@130000 { + compatible = "vivante,gc"; + reg = <0x00130000 0x4000>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>, + <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>; + clock-names = "bus", "core", "shader"; + power-domains = <&gpc 1>; + }; + +... -- cgit v1.2.3 From 2f384801a4e0bcca7f5846c346decffed44f0c0b Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Fri, 7 Feb 2020 11:03:05 +0100 Subject: dt-bindinsg: net: can: Convert can-transceiver to json-schema Convert can-transceiver property to json-schema Signed-off-by: Benjamin Gaignard Signed-off-by: Rob Herring --- .../bindings/net/can/can-transceiver.txt | 24 ---------------------- .../bindings/net/can/can-transceiver.yaml | 18 ++++++++++++++++ 2 files changed, 18 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/can/can-transceiver.txt create mode 100644 Documentation/devicetree/bindings/net/can/can-transceiver.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.txt b/Documentation/devicetree/bindings/net/can/can-transceiver.txt deleted file mode 100644 index 0011f53ff159..000000000000 --- a/Documentation/devicetree/bindings/net/can/can-transceiver.txt +++ /dev/null @@ -1,24 +0,0 @@ -Generic CAN transceiver Device Tree binding ------------------------------- - -CAN transceiver typically limits the max speed in standard CAN and CAN FD -modes. Typically these limitations are static and the transceivers themselves -provide no way to detect this limitation at runtime. For this situation, -the "can-transceiver" node can be used. - -Required Properties: - max-bitrate: a positive non 0 value that determines the max - speed that CAN/CAN-FD can run. Any other value - will be ignored. - -Examples: - -Based on Texas Instrument's TCAN1042HGV CAN Transceiver - -m_can0 { - .... - can-transceiver { - max-bitrate = <5000000>; - }; - ... -}; diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml new file mode 100644 index 000000000000..6396977d29e5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/can-transceiver.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CAN transceiver Bindings + +description: CAN transceiver generic properties bindings + +maintainers: + - Rob Herring + +properties: + max-bitrate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run. + minimum: 1 -- cgit v1.2.3 From 824674b59f72e8aed2c6b36e12ab07a2eb54769a Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Fri, 7 Feb 2020 11:03:06 +0100 Subject: dt-bindings: net: can: Convert M_CAN to json-schema Convert M_CAN bindings to json-schema Signed-off-by: Benjamin Gaignard Signed-off-by: Rob Herring --- .../devicetree/bindings/net/can/bosch,m_can.yaml | 144 +++++++++++++++++++++ .../devicetree/bindings/net/can/m_can.txt | 75 ----------- 2 files changed, 144 insertions(+), 75 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/can/bosch,m_can.yaml delete mode 100644 Documentation/devicetree/bindings/net/can/m_can.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml new file mode 100644 index 000000000000..cccf8202c8f7 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch MCAN controller Bindings + +description: Bosch MCAN controller for CAN bus + +maintainers: + - Sriram Dash + +properties: + compatible: + const: bosch,m_can + + reg: + items: + - description: M_CAN registers map + - description: message RAM + + reg-names: + items: + - const: m_can + - const: message_ram + + interrupts: + items: + - description: interrupt line0 + - description: interrupt line1 + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: int0 + - const: int1 + minItems: 1 + maxItems: 2 + + clocks: + items: + - description: peripheral clock + - description: bus clock + + clock-names: + items: + - const: hclk + - const: cclk + + bosch,mram-cfg: + description: | + Message RAM configuration data. + Multiple M_CAN instances can share the same Message RAM + and each element(e.g Rx FIFO or Tx Buffer and etc) number + in Message RAM is also configurable, so this property is + telling driver how the shared or private Message RAM are + used by this M_CAN controller. + + The format should be as follows: + + The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to + 0x0 if you're using a private Message RAM. The remain cells + are used to specify how many elements are used for each FIFO/Buffer. + + M_CAN includes the following elements according to user manual: + 11-bit Filter 0-128 elements / 0-128 words + 29-bit Filter 0-64 elements / 0-128 words + Rx FIFO 0 0-64 elements / 0-1152 words + Rx FIFO 1 0-64 elements / 0-1152 words + Rx Buffers 0-64 elements / 0-1152 words + Tx Event FIFO 0-32 elements / 0-64 words + Tx Buffers 0-32 elements / 0-576 words + + Please refer to 2.4.1 Message RAM Configuration in Bosch + M_CAN user manual for details. + allOf: + - $ref: /schemas/types.yaml#/definitions/int32-array + - items: + items: + - description: The 'offset' is an address offset of the Message RAM + where the following elements start from. This is usually + set to 0x0 if you're using a private Message RAM. + default: 0 + - description: 11-bit Filter 0-128 elements / 0-128 words + minimum: 0 + maximum: 128 + - description: 29-bit Filter 0-64 elements / 0-128 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 0 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 1 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx Buffers 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Tx Event FIFO 0-32 elements / 0-64 words + minimum: 0 + maximum: 32 + - description: Tx Buffers 0-32 elements / 0-576 words + minimum: 0 + maximum: 32 + maxItems: 1 + + can-transceiver: + $ref: can-transceiver.yaml# + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + - bosch,mram-cfg + +additionalProperties: false + +examples: + - | + #include + can@20e8000 { + compatible = "bosch,m_can"; + reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <0 114 0x04>, <0 114 0x04>; + interrupt-names = "int0", "int1"; + clocks = <&clks IMX6SX_CLK_CANFD>, + <&clks IMX6SX_CLK_CANFD>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; + + can-transceiver { + max-bitrate = <5000000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt deleted file mode 100644 index ed614383af9c..000000000000 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ /dev/null @@ -1,75 +0,0 @@ -Bosch MCAN controller Device Tree Bindings -------------------------------------------------- - -Required properties: -- compatible : Should be "bosch,m_can" for M_CAN controllers -- reg : physical base address and size of the M_CAN - registers map and Message RAM -- reg-names : Should be "m_can" and "message_ram" -- interrupts : Should be the interrupt number of M_CAN interrupt - line 0 and line 1, could be same if sharing - the same interrupt. -- interrupt-names : Should contain "int0" and "int1" -- clocks : Clocks used by controller, should be host clock - and CAN clock. -- clock-names : Should contain "hclk" and "cclk" -- pinctrl- : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt -- pinctrl-names : Names corresponding to the numbered pinctrl states -- bosch,mram-cfg : Message RAM configuration data. - Multiple M_CAN instances can share the same Message - RAM and each element(e.g Rx FIFO or Tx Buffer and etc) - number in Message RAM is also configurable, - so this property is telling driver how the shared or - private Message RAM are used by this M_CAN controller. - - The format should be as follows: - - The 'offset' is an address offset of the Message RAM - where the following elements start from. This is - usually set to 0x0 if you're using a private Message - RAM. The remain cells are used to specify how many - elements are used for each FIFO/Buffer. - - M_CAN includes the following elements according to user manual: - 11-bit Filter 0-128 elements / 0-128 words - 29-bit Filter 0-64 elements / 0-128 words - Rx FIFO 0 0-64 elements / 0-1152 words - Rx FIFO 1 0-64 elements / 0-1152 words - Rx Buffers 0-64 elements / 0-1152 words - Tx Event FIFO 0-32 elements / 0-64 words - Tx Buffers 0-32 elements / 0-576 words - - Please refer to 2.4.1 Message RAM Configuration in - Bosch M_CAN user manual for details. - -Optional Subnode: -- can-transceiver : Can-transceiver subnode describing maximum speed - that can be used for CAN/CAN-FD modes. See - Documentation/devicetree/bindings/net/can/can-transceiver.txt - for details. -Example: -SoC dtsi: -m_can1: can@20e8000 { - compatible = "bosch,m_can"; - reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; - reg-names = "m_can", "message_ram"; - interrupts = <0 114 0x04>, - <0 114 0x04>; - interrupt-names = "int0", "int1"; - clocks = <&clks IMX6SX_CLK_CANFD>, - <&clks IMX6SX_CLK_CANFD>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; -}; - -Board dts: -&m_can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_m_can1>; - status = "enabled"; - - can-transceiver { - max-bitrate = <5000000>; - }; -}; -- cgit v1.2.3 From 1c27e9ae0f69f1947a95b01ab21526204ed6a24c Mon Sep 17 00:00:00 2001 From: Bastian Germann Date: Fri, 14 Feb 2020 12:10:01 +0100 Subject: dt-bindings: Add vendor prefix for Linutronix Add a vendor prefix for Linutronix GmbH. Website: https://linutronix.de/ Co-developed-by: Benedikt Spranger Signed-off-by: Benedikt Spranger Signed-off-by: Bastian Germann Acked-by: Maxime Ripard Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index ac6aa3332b28..9260980bc83a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -547,6 +547,8 @@ patternProperties: description: LinkSprite Technologies, Inc. "^linksys,.*": description: Belkin International, Inc. (Linksys) + "^linutronix,.*": + description: Linutronix GmbH "^linux,.*": description: Linux-specific binding "^linx,.*": -- cgit v1.2.3 From a153182716c0dfbe6d929f32e89a3a2c3399c4b2 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 10 Feb 2020 15:04:16 +0100 Subject: dt-bindings: usb: exynos-usb: Document clock names for DWC3 bindings The Exynos DWC3 driver expects certain clock names, depending on used compatible. Document this explicitly in the bindings. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/usb/exynos-usb.txt | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index 66c394f9e11f..6aae1544f240 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -78,7 +78,14 @@ Required properties: - ranges: allows valid 1:1 translation between child's address space and parent's address space - clocks: Clock IDs array as required by the controller. - - clock-names: names of clocks correseponding to IDs in the clock property + - clock-names: Names of clocks corresponding to IDs in the clock property. + Following clock names shall be provided for different + compatibles: + - samsung,exynos5250-dwusb3: "usbdrd30", + - samsung,exynos5433-dwusb3: "aclk", "susp_clk", "pipe_pclk", + "phyclk", + - samsung,exynos7-dwusb3: "usbdrd30", "usbdrd30_susp_clk", + "usbdrd30_axius_clk" - vdd10-supply: 1.0V powr supply - vdd33-supply: 3.0V/3.3V power supply -- cgit v1.2.3 From 94d57ebd233a39d4d28fcd4de13a092146da3f4f Mon Sep 17 00:00:00 2001 From: Alexey Minnekhanov Date: Wed, 12 Feb 2020 20:09:12 +0300 Subject: dt-bindings: Add vendor prefix for Xiaomi Xiaomi Corporation is a Chinese electronics company. Signed-off-by: Alexey Minnekhanov Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 9260980bc83a..a97601e0e537 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1086,6 +1086,8 @@ patternProperties: description: X-Powers "^xes,.*": description: Extreme Engineering Solutions (X-ES) + "^xiaomi,.*": + description: Xiaomi Technology Co., Ltd. "^xillybus,.*": description: Xillybus Ltd. "^xinpeng,.*": -- cgit v1.2.3 From faf8e30acb219849725aa75302d36e0ffdb6a258 Mon Sep 17 00:00:00 2001 From: Alexey Minnekhanov Date: Wed, 12 Feb 2020 20:09:13 +0300 Subject: dt-bindings: arm: Add kryo260 compatible Kryo260 is found in SDM660, so add it in list of cpu compatibles Signed-off-by: Alexey Minnekhanov Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/cpus.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 7a9c3ce2dbef..765af3cbd11f 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -155,6 +155,7 @@ properties: - nvidia,tegra194-carmel - qcom,krait - qcom,kryo + - qcom,kryo260 - qcom,kryo385 - qcom,kryo485 - qcom,scorpion -- cgit v1.2.3 From 5c2614e995de07b41eb355155eb5e0e3d593718b Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Fri, 21 Feb 2020 19:35:28 +0000 Subject: dt-bindings: ARM: Add recent Cortex/Neoverse CPUs The CPU group has been busy since we last updated these bindings... Add definitions for all the new Cortex-A and Neoverse cores now available. Signed-off-by: Robin Murphy Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/cpus.yaml | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 765af3cbd11f..f61a5a13fb42 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -123,11 +123,18 @@ properties: - arm,cortex-a12 - arm,cortex-a15 - arm,cortex-a17 + - arm,cortex-a32 + - arm,cortex-a34 + - arm,cortex-a35 - arm,cortex-a53 - arm,cortex-a55 - arm,cortex-a57 + - arm,cortex-a65 - arm,cortex-a72 - arm,cortex-a73 + - arm,cortex-a75 + - arm,cortex-a76 + - arm,cortex-a77 - arm,cortex-m0 - arm,cortex-m0+ - arm,cortex-m1 @@ -136,6 +143,8 @@ properties: - arm,cortex-r4 - arm,cortex-r5 - arm,cortex-r7 + - arm,neoverse-e1 + - arm,neoverse-n1 - brcm,brahma-b15 - brcm,brahma-b53 - brcm,vulcan -- cgit v1.2.3 From 05f9e9f7c9f477362b5adaa194a33270102abb5b Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Fri, 21 Feb 2020 19:35:29 +0000 Subject: dt-bindings: ARM: Add recent Cortex/Neoverse PMUs Add new PMU definitions to correspond with the CPU bindings. Signed-off-by: Robin Murphy Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/pmu.yaml | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index 52ae094ce330..cc52195d0e9e 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -21,11 +21,20 @@ properties: - enum: - apm,potenza-pmu - arm,armv8-pmuv3 + - arm,neoverse-n1-pmu + - arm,neoverse-e1-pmu + - arm,cortex-a77-pmu + - arm,cortex-a76-pmu + - arm,cortex-a75-pmu - arm,cortex-a73-pmu - arm,cortex-a72-pmu + - arm,cortex-a65-pmu - arm,cortex-a57-pmu + - arm,cortex-a55-pmu - arm,cortex-a53-pmu - arm,cortex-a35-pmu + - arm,cortex-a34-pmu + - arm,cortex-a32-pmu - arm,cortex-a17-pmu - arm,cortex-a15-pmu - arm,cortex-a12-pmu -- cgit v1.2.3 From a8e446e49765bb680ac7681ab334d5baf9d25722 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Fri, 21 Feb 2020 19:35:30 +0000 Subject: dt-bindings: ARM: Clean up PMU compatible list The "alpha by vendor, reverse-alpha by model" sorting of compatibles that we seem to have ended up with is decidedly odd. Make it less so. Also copy the comment from the generic "arm,armv8" CPU binding to help clarify that the "arm,armv8-pmuv3" binding is rather intended to be a counterpart to that, for describing implementations without a specific microarchitecture like the AEMv8 software model. Signed-off-by: Robin Murphy Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/pmu.yaml | 50 +++++++++++++------------- 1 file changed, 25 insertions(+), 25 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index cc52195d0e9e..97df36d301c9 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -20,36 +20,36 @@ properties: items: - enum: - apm,potenza-pmu - - arm,armv8-pmuv3 - - arm,neoverse-n1-pmu - - arm,neoverse-e1-pmu - - arm,cortex-a77-pmu - - arm,cortex-a76-pmu - - arm,cortex-a75-pmu - - arm,cortex-a73-pmu - - arm,cortex-a72-pmu - - arm,cortex-a65-pmu - - arm,cortex-a57-pmu - - arm,cortex-a55-pmu - - arm,cortex-a53-pmu - - arm,cortex-a35-pmu - - arm,cortex-a34-pmu - - arm,cortex-a32-pmu - - arm,cortex-a17-pmu - - arm,cortex-a15-pmu - - arm,cortex-a12-pmu - - arm,cortex-a9-pmu - - arm,cortex-a8-pmu - - arm,cortex-a7-pmu - - arm,cortex-a5-pmu - - arm,arm11mpcore-pmu - - arm,arm1176-pmu + - arm,armv8-pmuv3 # Only for s/w models - arm,arm1136-pmu + - arm,arm1176-pmu + - arm,arm11mpcore-pmu + - arm,cortex-a5-pmu + - arm,cortex-a7-pmu + - arm,cortex-a8-pmu + - arm,cortex-a9-pmu + - arm,cortex-a12-pmu + - arm,cortex-a15-pmu + - arm,cortex-a17-pmu + - arm,cortex-a32-pmu + - arm,cortex-a34-pmu + - arm,cortex-a35-pmu + - arm,cortex-a53-pmu + - arm,cortex-a55-pmu + - arm,cortex-a57-pmu + - arm,cortex-a65-pmu + - arm,cortex-a72-pmu + - arm,cortex-a73-pmu + - arm,cortex-a75-pmu + - arm,cortex-a76-pmu + - arm,cortex-a77-pmu + - arm,neoverse-e1-pmu + - arm,neoverse-n1-pmu - brcm,vulcan-pmu - cavium,thunder-pmu + - qcom,krait-pmu - qcom,scorpion-pmu - qcom,scorpion-mp-pmu - - qcom,krait-pmu interrupts: # Don't know how many CPUs, so no constraints to specify -- cgit v1.2.3 From 238415f76084080f3085e72ead4b76775d21fc46 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 19 Feb 2020 16:37:45 +0100 Subject: dt-bindings: example-schema: Drop double quotes around URLs It is no longer needed to wrap URLs in double quotes. Signed-off-by: Geert Uytterhoeven Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/example-schema.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index 4ddcf709cc3c..62811a1b5058 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -7,9 +7,9 @@ # $id is a unique identifier based on the filename. There may or may not be a # file present at the URL. -$id: "http://devicetree.org/schemas/example-schema.yaml#" +$id: http://devicetree.org/schemas/example-schema.yaml# # $schema is the meta-schema this schema should be validated with. -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$schema: http://devicetree.org/meta-schemas/core.yaml# title: An example schema annotated with jsonschema details -- cgit v1.2.3 From 8acbbddcf9913149ef47b20f487289da02c4a291 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 19 Feb 2020 16:41:46 +0100 Subject: dt-bindings: ata: rcar-sata: Convert to json-schema MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Convert the Renesas R-Car Serial-ATA Device Tree binding documentation to json-schema. While at it: - Remove the deprecated "renesas,rcar-sata" compatible value, - Add "iommus", "power-domains", and "resets" properties, - Update the example. Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Signed-off-by: Rob Herring --- .../devicetree/bindings/ata/renesas,rcar-sata.yaml | 71 ++++++++++++++++++++++ .../devicetree/bindings/ata/sata_rcar.txt | 36 ----------- 2 files changed, 71 insertions(+), 36 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml delete mode 100644 Documentation/devicetree/bindings/ata/sata_rcar.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml new file mode 100644 index 000000000000..7b69831060d8 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas R-Car Serial-ATA Interface + +maintainers: + - Geert Uytterhoeven + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,sata-r8a7779 # R-Car H1 + - items: + - enum: + - renesas,sata-r8a7790-es1 # R-Car H2 ES1 + - renesas,sata-r8a7790 # R-Car H2 other than ES1 + - renesas,sata-r8a7791 # R-Car M2-W + - renesas,sata-r8a7793 # R-Car M2-N + - const: renesas,rcar-gen2-sata # generic R-Car Gen2 + - items: + - enum: + - renesas,sata-r8a774b1 # RZ/G2N + - renesas,sata-r8a7795 # R-Car H3 + - renesas,sata-r8a77965 # R-Car M3-N + - const: renesas,rcar-gen3-sata # generic R-Car Gen3 or RZ/G2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include + #include + #include + + sata@ee300000 { + compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; + reg = <0xee300000 0x200000>; + interrupts = ; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 815>; + }; diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt deleted file mode 100644 index a2fbdc91570d..000000000000 --- a/Documentation/devicetree/bindings/ata/sata_rcar.txt +++ /dev/null @@ -1,36 +0,0 @@ -* Renesas R-Car SATA - -Required properties: -- compatible : should contain one or more of the following: - - "renesas,sata-r8a774b1" for RZ/G2N - - "renesas,sata-r8a7779" for R-Car H1 - - "renesas,sata-r8a7790-es1" for R-Car H2 ES1 - - "renesas,sata-r8a7790" for R-Car H2 other than ES1 - - "renesas,sata-r8a7791" for R-Car M2-W - - "renesas,sata-r8a7793" for R-Car M2-N - - "renesas,sata-r8a7795" for R-Car H3 - - "renesas,sata-r8a77965" for R-Car M3-N - - "renesas,rcar-gen2-sata" for a generic R-Car Gen2 - compatible device - - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 or - RZ/G2 compatible device - - "renesas,rcar-sata" is deprecated - - When compatible with the generic version nodes - must list the SoC-specific version corresponding - to the platform first followed by the generic - version. - -- reg : address and length of the SATA registers; -- interrupts : must consist of one interrupt specifier. -- clocks : must contain a reference to the functional clock. - -Example: - -sata0: sata@ee300000 { - compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; - reg = <0 0xee300000 0 0x2000>; - interrupt-parent = <&gic>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp8_clks R8A7791_CLK_SATA0>; -}; -- cgit v1.2.3 From 4f325e8c83e752b84d2c10b9234c5518c198e15e Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 21 Feb 2020 11:11:36 +0900 Subject: dt-bindings: serial: Convert UniPhier UART to json-schema Convert the UniPhier UART binding to DT schema format. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../bindings/serial/socionext,uniphier-uart.yaml | 46 ++++++++++++++++++++++ .../devicetree/bindings/serial/uniphier-uart.txt | 22 ----------- 2 files changed, 46 insertions(+), 22 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml delete mode 100644 Documentation/devicetree/bindings/serial/uniphier-uart.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml new file mode 100644 index 000000000000..09a30300850c --- /dev/null +++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/socionext,uniphier-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier UART controller + +maintainers: + - Masahiro Yamada + +properties: + compatible: + const: socionext,uniphier-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + + auto-flow-control: + description: enable automatic flow control support. + $ref: /schemas/types.yaml#/definitions/flag + +required: + - compatible + - reg + - interrupts + - clocks + +examples: + - | + aliases { + serial0 = &serial0; + }; + + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + clocks = <&uart_clk>; + }; diff --git a/Documentation/devicetree/bindings/serial/uniphier-uart.txt b/Documentation/devicetree/bindings/serial/uniphier-uart.txt deleted file mode 100644 index 7a1bf02bb869..000000000000 --- a/Documentation/devicetree/bindings/serial/uniphier-uart.txt +++ /dev/null @@ -1,22 +0,0 @@ -UniPhier UART controller - -Required properties: -- compatible: should be "socionext,uniphier-uart". -- reg: offset and length of the register set for the device. -- interrupts: a single interrupt specifier. -- clocks: phandle to the input clock. - -Optional properties: --auto-flow-control: enable automatic flow control support. - -Example: - aliases { - serial0 = &serial0; - }; - - serial0: serial@54006800 { - compatible = "socionext,uniphier-uart"; - reg = <0x54006800 0x40>; - interrupts = <0 33 4>; - clocks = <&uart_clk>; - }; -- cgit v1.2.3 From b279cac91583a75295b4fa1ba5f6591683b69fb4 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 21 Feb 2020 11:55:33 +0900 Subject: dt-bindings: i2c: Convert UniPhier I2C controller to json-schema Convert the UniPhier I2C controller (FIFO-less) binding to DT schema format. There are two types of I2C controllers used on the UniPhier platform. This is the legacy one without FIFO support, which is used on the sLD8 SoC or older. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../devicetree/bindings/i2c/i2c-uniphier.txt | 25 ----------- .../bindings/i2c/socionext,uniphier-i2c.yaml | 50 ++++++++++++++++++++++ 2 files changed, 50 insertions(+), 25 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-uniphier.txt create mode 100644 Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt deleted file mode 100644 index 26f9d95b3436..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt +++ /dev/null @@ -1,25 +0,0 @@ -UniPhier I2C controller (FIFO-less) - -Required properties: -- compatible: should be "socionext,uniphier-i2c". -- #address-cells: should be 1. -- #size-cells: should be 0. -- reg: offset and length of the register set for the device. -- interrupts: a single interrupt specifier. -- clocks: phandle to the input clock. - -Optional properties: -- clock-frequency: desired I2C bus frequency in Hz. The maximum supported - value is 400000. Defaults to 100000 if not specified. - -Examples: - - i2c0: i2c@58400000 { - compatible = "socionext,uniphier-i2c"; - reg = <0x58400000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 1>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml new file mode 100644 index 000000000000..ef998def554e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/socionext,uniphier-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier I2C controller (FIFO-less) + +maintainers: + - Masahiro Yamada + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: socionext,uniphier-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + minimum: 100000 + maximum: 400000 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - interrupts + - clocks + +examples: + - | + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 1>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; -- cgit v1.2.3 From 4abfe6f04d93e4aac202007486266bd1a904cc43 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 21 Feb 2020 11:55:34 +0900 Subject: dt-bindings: i2c: Convert UniPhier FI2C controller to json-schema Convert the UniPhier FIFO-builtin I2C (a.k.a. FIFO) controller binding to DT schema format. There are two types of I2C controllers used on the UniPhier platform. This is the new one with FIFO support, which is used on the Pro4 SoC or newer. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../devicetree/bindings/i2c/i2c-uniphier-f.txt | 25 ----------- .../bindings/i2c/socionext,uniphier-fi2c.yaml | 50 ++++++++++++++++++++++ 2 files changed, 50 insertions(+), 25 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt create mode 100644 Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt deleted file mode 100644 index 27fc6f8c798b..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt +++ /dev/null @@ -1,25 +0,0 @@ -UniPhier I2C controller (FIFO-builtin) - -Required properties: -- compatible: should be "socionext,uniphier-fi2c". -- #address-cells: should be 1. -- #size-cells: should be 0. -- reg: offset and length of the register set for the device. -- interrupts: a single interrupt specifier. -- clocks: phandle to the input clock. - -Optional properties: -- clock-frequency: desired I2C bus frequency in Hz. The maximum supported - value is 400000. Defaults to 100000 if not specified. - -Examples: - - i2c0: i2c@58780000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58780000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 4>; - clocks = <&i2c_clk>; - clock-frequency = <100000>; - }; diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml new file mode 100644 index 000000000000..15abc022968e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/socionext,uniphier-fi2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier I2C controller (FIFO-builtin) + +maintainers: + - Masahiro Yamada + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: socionext,uniphier-fi2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + minimum: 100000 + maximum: 400000 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - interrupts + - clocks + +examples: + - | + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; -- cgit v1.2.3 From 4dcd55fd703183fe64c570c53cd7f8c9177f879c Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 22 Feb 2020 15:04:33 +0900 Subject: dt-bindings: arm: Convert UniPhier board/SoC bindings to json-schema Convert the Socionext UniPhier board/SoC binding to DT schema format. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../devicetree/bindings/arm/socionext/uniphier.txt | 47 ----------------- .../bindings/arm/socionext/uniphier.yaml | 61 ++++++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 62 insertions(+), 48 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/socionext/uniphier.txt create mode 100644 Documentation/devicetree/bindings/arm/socionext/uniphier.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/uniphier.txt deleted file mode 100644 index b3ed1033740e..000000000000 --- a/Documentation/devicetree/bindings/arm/socionext/uniphier.txt +++ /dev/null @@ -1,47 +0,0 @@ -Socionext UniPhier SoC family ------------------------------ - -Required properties in the root node: - - compatible: should contain board and SoC compatible strings - -SoC and board compatible strings: - (sorted chronologically) - - - LD4 SoC: "socionext,uniphier-ld4" - - Reference Board: "socionext,uniphier-ld4-ref" - - - Pro4 SoC: "socionext,uniphier-pro4" - - Reference Board: "socionext,uniphier-pro4-ref" - - Ace Board: "socionext,uniphier-pro4-ace" - - Sanji Board: "socionext,uniphier-pro4-sanji" - - - sLD8 SoC: "socionext,uniphier-sld8" - - Reference Board: "socionext,uniphier-sld8-ref" - - - PXs2 SoC: "socionext,uniphier-pxs2" - - Gentil Board: "socionext,uniphier-pxs2-gentil" - - Vodka Board: "socionext,uniphier-pxs2-vodka" - - - LD6b SoC: "socionext,uniphier-ld6b" - - Reference Board: "socionext,uniphier-ld6b-ref" - - - LD11 SoC: "socionext,uniphier-ld11" - - Reference Board: "socionext,uniphier-ld11-ref" - - Global Board: "socionext,uniphier-ld11-global" - - - LD20 SoC: "socionext,uniphier-ld20" - - Reference Board: "socionext,uniphier-ld20-ref" - - Global Board: "socionext,uniphier-ld20-global" - - - PXs3 SoC: "socionext,uniphier-pxs3" - - Reference Board: "socionext,uniphier-pxs3-ref" - -Example: - -/dts-v1/; - -/ { - compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20"; - - ... -}; diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml new file mode 100644 index 000000000000..65ad6d8a3c99 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/socionext/uniphier.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier platform device tree bindings + +maintainers: + - Masahiro Yamada + +properties: + $nodename: + const: / + compatible: + oneOf: + - description: LD4 SoC boards + items: + - enum: + - socionext,uniphier-ld4-ref + - const: socionext,uniphier-ld4 + - description: Pro4 SoC boards + items: + - enum: + - socionext,uniphier-pro4-ace + - socionext,uniphier-pro4-ref + - socionext,uniphier-pro4-sanji + - const: socionext,uniphier-pro4 + - description: sLD8 SoC boards + items: + - enum: + - socionext,uniphier-sld8-ref + - const: socionext,uniphier-sld8 + - description: PXs2 SoC boards + items: + - enum: + - socionext,uniphier-pxs2-gentil + - socionext,uniphier-pxs2-vodka + - const: socionext,uniphier-pxs2 + - description: LD6b SoC boards + items: + - enum: + - socionext,uniphier-ld6b-ref + - const: socionext,uniphier-ld6b + - description: LD11 SoC boards + items: + - enum: + - socionext,uniphier-ld11-global + - socionext,uniphier-ld11-ref + - const: socionext,uniphier-ld11 + - description: LD20 SoC boards + items: + - enum: + - socionext,uniphier-ld20-global + - socionext,uniphier-ld20-ref + - const: socionext,uniphier-ld20 + - description: PXs3 SoC boards + items: + - enum: + - socionext,uniphier-pxs3-ref + - const: socionext,uniphier-pxs3 diff --git a/MAINTAINERS b/MAINTAINERS index 8044aa190bcb..67402bb4cdc4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2546,7 +2546,7 @@ M: Masahiro Yamada L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git S: Maintained -F: Documentation/devicetree/bindings/arm/socionext/uniphier.txt +F: Documentation/devicetree/bindings/arm/socionext/uniphier.yaml F: Documentation/devicetree/bindings/gpio/gpio-uniphier.txt F: Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt F: arch/arm/boot/dts/uniphier* -- cgit v1.2.3 From 89099d1432843a7a6bbaac6d33e37365c9fe27ad Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 22 Feb 2020 15:04:34 +0900 Subject: dt-bindings: gpio: Convert UniPhier GPIO to json-schema Convert the UniPhier GPIO controller binding to DT schema format. I omitted the 'gpio-ranges' property because it is defined in the dt-schema project (/schemas/gpio/gpio.yaml). As of writing, the 'gpio-ranges-group-names' is not defined in that file despite it is a common property described in Documentation/devicetree/bindings/gpio/gpio.txt So, I defined it in this schema. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../devicetree/bindings/gpio/gpio-uniphier.txt | 51 ------------ .../bindings/gpio/socionext,uniphier-gpio.yaml | 92 ++++++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 93 insertions(+), 52 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-uniphier.txt create mode 100644 Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt deleted file mode 100644 index f281f12dac18..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt +++ /dev/null @@ -1,51 +0,0 @@ -UniPhier GPIO controller - -Required properties: -- compatible: Should be "socionext,uniphier-gpio". -- reg: Specifies offset and length of the register set for the device. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells: Should be 2. The first cell is the pin number and the second - cell is used to specify optional parameters. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be 2. The first cell defines the interrupt number. - The second cell bits[3:0] is used to specify trigger type as follows: - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - Valid combinations are 1, 2, 3, 4, 8. -- ngpios: Specifies the number of GPIO lines. -- gpio-ranges: Mapping to pin controller pins (as described in gpio.txt) -- socionext,interrupt-ranges: Specifies an interrupt number mapping between - this GPIO controller and its interrupt parent, in the form of arbitrary - number of triplets. - -Optional properties: -- gpio-ranges-group-names: Used for named gpio ranges (as described in gpio.txt) - -Example: - gpio: gpio@55000000 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000000 0x200>; - interrupt-parent = <&aidet>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl 0 0 0>; - gpio-ranges-group-names = "gpio_range"; - ngpios = <248>; - socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>; - }; - -Consumer Example: - - sdhci0_pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>; - }; - -Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC document. -Unfortunately, only the one's place is octal in the port numbering. (That is, -PORT 8, 9, 18, 19, 28, 29, ... are missing.) UNIPHIER_GPIO_PORT() is a helper -macro to calculate 29 * 8 + 4. diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml new file mode 100644 index 000000000000..580a39e09d39 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/socionext,uniphier-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier GPIO controller + +maintainers: + - Masahiro Yamada + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + const: socionext,uniphier-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + description: | + The first cell defines the interrupt number. + The second cell bits[3:0] is used to specify trigger type as follows: + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Valid combinations are 1, 2, 3, 4, 8. + const: 2 + + ngpios: + minimum: 0 + maximum: 512 + + gpio-ranges-group-names: + $ref: /schemas/types.yaml#/definitions/string-array + + socionext,interrupt-ranges: + description: | + Specifies an interrupt number mapping between this GPIO controller and + its interrupt parent, in the form of arbitrary number of + triplets. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - interrupt-controller + - "#interrupt-cells" + - ngpios + - gpio-ranges + - socionext,interrupt-ranges + +examples: + - | + #include + #include + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <248>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>; + }; + + // Consumer: + // Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC + // document. Unfortunately, only the one's place is octal in the port + // numbering. (That is, PORT 8, 9, 18, 19, 28, 29, ... do not exist.) + // UNIPHIER_GPIO_PORT() is a helper macro to calculate 29 * 8 + 4. + sdhci0_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 67402bb4cdc4..56fe62c1b1f5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2547,7 +2547,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git S: Maintained F: Documentation/devicetree/bindings/arm/socionext/uniphier.yaml -F: Documentation/devicetree/bindings/gpio/gpio-uniphier.txt +F: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml F: Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt F: arch/arm/boot/dts/uniphier* F: arch/arm/include/asm/hardware/cache-uniphier.h -- cgit v1.2.3 From 849b10446bf939eba3d8955c89c4433f8529248e Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 22 Feb 2020 15:04:35 +0900 Subject: dt-bindings: pinctrl: Convert UniPhier pin controller to json-schema Convert the UniPhier pin controller binding to DT schema format. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../pinctrl/socionext,uniphier-pinctrl.txt | 27 -------------- .../pinctrl/socionext,uniphier-pinctrl.yaml | 42 ++++++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 43 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt deleted file mode 100644 index 8173b12138ad..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt +++ /dev/null @@ -1,27 +0,0 @@ -UniPhier SoCs pin controller - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-pinctrl" - for LD4 SoC - "socionext,uniphier-pro4-pinctrl" - for Pro4 SoC - "socionext,uniphier-sld8-pinctrl" - for sLD8 SoC - "socionext,uniphier-pro5-pinctrl" - for Pro5 SoC - "socionext,uniphier-pxs2-pinctrl" - for PXs2 SoC - "socionext,uniphier-ld6b-pinctrl" - for LD6b SoC - "socionext,uniphier-ld11-pinctrl" - for LD11 SoC - "socionext,uniphier-ld20-pinctrl" - for LD20 SoC - "socionext,uniphier-pxs3-pinctrl" - for PXs3 SoC - -Note: -The UniPhier pinctrl should be a subnode of a "syscon" compatible node. - -Example: - soc-glue@5f800000 { - compatible = "socionext,uniphier-pro4-soc-glue", - "simple-mfd", "syscon"; - reg = <0x5f800000 0x2000>; - - pinctrl: pinctrl { - compatible = "socionext,uniphier-pro4-pinctrl"; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml new file mode 100644 index 000000000000..f8a93d8680f9 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/socionext,uniphier-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier SoCs pin controller + +maintainers: + - Masahiro Yamada + +properties: + $nodename: + pattern: "pinctrl" + + compatible: + enum: + - socionext,uniphier-ld4-pinctrl + - socionext,uniphier-pro4-pinctrl + - socionext,uniphier-sld8-pinctrl + - socionext,uniphier-pro5-pinctrl + - socionext,uniphier-pxs2-pinctrl + - socionext,uniphier-ld6b-pinctrl + - socionext,uniphier-ld11-pinctrl + - socionext,uniphier-ld20-pinctrl + - socionext,uniphier-pxs3-pinctrl + +required: + - compatible + +examples: + - | + // The UniPhier pinctrl should be a subnode of a "syscon" compatible node. + + soc-glue@5f800000 { + compatible = "socionext,uniphier-pro4-soc-glue", "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-pro4-pinctrl"; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 56fe62c1b1f5..c3800f3b5e6e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2548,7 +2548,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.gi S: Maintained F: Documentation/devicetree/bindings/arm/socionext/uniphier.yaml F: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml -F: Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt +F: Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml F: arch/arm/boot/dts/uniphier* F: arch/arm/include/asm/hardware/cache-uniphier.h F: arch/arm/mach-uniphier/ -- cgit v1.2.3 From 7f44205eb28ce1e7df947a3a2acd7da678c62940 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 22 Feb 2020 15:11:09 +0900 Subject: dt-bindings: bus: Convert UniPhier System Bus to json-schema Convert the UniPhier System Bus controller binding to DT schema format. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../bus/socionext,uniphier-system-bus.yaml | 96 ++++++++++++++++++++++ .../bindings/bus/uniphier-system-bus.txt | 66 --------------- 2 files changed, 96 insertions(+), 66 deletions(-) create mode 100644 Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml delete mode 100644 Documentation/devicetree/bindings/bus/uniphier-system-bus.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml new file mode 100644 index 000000000000..ff9600d6de3b --- /dev/null +++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/socionext,uniphier-system-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier System Bus + +description: | + The UniPhier System Bus is an external bus that connects on-board devices to + the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and + some control signals. It supports up to 8 banks (chip selects). + + Before any access to the bus, the bus controller must be configured; the bus + controller registers provide the control for the translation from the offset + within each bank to the CPU-viewed address. The needed setup includes the + base address, the size of each bank. Optionally, some timing parameters can + be optimized for faster bus access. + +maintainers: + - Masahiro Yamada + +properties: + compatible: + const: socionext,uniphier-system-bus + + reg: + maxItems: 1 + + "#address-cells": + description: | + The first cell is the bank number (chip select). + The second cell is the address offset within the bank. + const: 2 + + "#size-cells": + const: 1 + + ranges: + description: | + Provide address translation from the System Bus to the parent bus. + + Note: + The address region(s) that can be assigned for the System Bus is + implementation defined. Some SoCs can use 0x00000000-0x0fffffff and + 0x40000000-0x4fffffff, while other SoCs only 0x40000000-0x4fffffff. + There might be additional limitations depending on SoCs and the boot mode. + The address translation is arbitrary as long as the banks are assigned in + the supported address space with the required alignment and they do not + overlap one another. + + For example, it is possible to map: + bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff + It is also possible to map: + bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff + There is no reason to stick to a particular translation mapping, but the + "ranges" property should provide a "reasonable" default that is known to + work. The software should initialize the bus controller according to it. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +examples: + - | + // In this example, + // - the Ethernet device is connected at the offset 0x01f00000 of CS1 and + // mapped to 0x43f00000 of the parent bus. + // - the UART device is connected at the offset 0x00200000 of CS5 and + // mapped to 0x46200000 of the parent bus. + + system-bus { + compatible = "socionext,uniphier-system-bus"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0x00000000 0x42000000 0x02000000>, + <5 0x00000000 0x46000000 0x01000000>; + + ethernet@1,01f00000 { + compatible = "smsc,lan9115"; + reg = <1 0x01f00000 0x1000>; + interrupts = <0 48 4>; + phy-mode = "mii"; + }; + + uart@5,00200000 { + compatible = "ns16550a"; + reg = <5 0x00200000 0x20>; + interrupts = <0 49 4>; + clock-frequency = <12288000>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt b/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt deleted file mode 100644 index 68ef80afff16..000000000000 --- a/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt +++ /dev/null @@ -1,66 +0,0 @@ -UniPhier System Bus - -The UniPhier System Bus is an external bus that connects on-board devices to -the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and -some control signals. It supports up to 8 banks (chip selects). - -Before any access to the bus, the bus controller must be configured; the bus -controller registers provide the control for the translation from the offset -within each bank to the CPU-viewed address. The needed setup includes the base -address, the size of each bank. Optionally, some timing parameters can be -optimized for faster bus access. - -Required properties: -- compatible: should be "socionext,uniphier-system-bus". -- reg: offset and length of the register set for the bus controller device. -- #address-cells: should be 2. The first cell is the bank number (chip select). - The second cell is the address offset within the bank. -- #size-cells: should be 1. -- ranges: should provide a proper address translation from the System Bus to - the parent bus. - -Note: -The address region(s) that can be assigned for the System Bus is implementation -defined. Some SoCs can use 0x00000000-0x0fffffff and 0x40000000-0x4fffffff, -while other SoCs can only use 0x40000000-0x4fffffff. There might be additional -limitations depending on SoCs and the boot mode. The address translation is -arbitrary as long as the banks are assigned in the supported address space with -the required alignment and they do not overlap one another. -For example, it is possible to map: - bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff -It is also possible to map: - bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff -There is no reason to stick to a particular translation mapping, but the -"ranges" property should provide a "reasonable" default that is known to work. -The software should initialize the bus controller according to it. - -Example: - - system-bus { - compatible = "socionext,uniphier-system-bus"; - reg = <0x58c00000 0x400>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <1 0x00000000 0x42000000 0x02000000 - 5 0x00000000 0x46000000 0x01000000>; - - ethernet@1,01f00000 { - compatible = "smsc,lan9115"; - reg = <1 0x01f00000 0x1000>; - interrupts = <0 48 4> - phy-mode = "mii"; - }; - - uart@5,00200000 { - compatible = "ns16550a"; - reg = <5 0x00200000 0x20>; - interrupts = <0 49 4> - clock-frequency = <12288000>; - }; - }; - -In this example, - - the Ethernet device is connected at the offset 0x01f00000 of CS1 and - mapped to 0x43f00000 of the parent bus. - - the UART device is connected at the offset 0x00200000 of CS5 and - mapped to 0x46200000 of the parent bus. -- cgit v1.2.3 From 6bb984a3cea02b76d54f2b4bcad7ef0cdca52bc6 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 22 Feb 2020 20:04:35 +0900 Subject: dt-bindings: interrupt-controller: Convert UniPhier AIDET to json-schema Convert the UniPhier AIDET (ARM Interrupt Detector) binding to DT schema format. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../socionext,uniphier-aidet.txt | 32 ------------ .../socionext,uniphier-aidet.yaml | 61 ++++++++++++++++++++++ 2 files changed, 61 insertions(+), 32 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt deleted file mode 100644 index 48e71d3ac2ad..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.txt +++ /dev/null @@ -1,32 +0,0 @@ -UniPhier AIDET - -UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC (Generic -Interrupt Controller). GIC itself can handle only high level and rising edge -interrupts. The AIDET provides logic inverter to support low level and falling -edge interrupts. - -Required properties: -- compatible: Should be one of the following: - "socionext,uniphier-ld4-aidet" - for LD4 SoC - "socionext,uniphier-pro4-aidet" - for Pro4 SoC - "socionext,uniphier-sld8-aidet" - for sLD8 SoC - "socionext,uniphier-pro5-aidet" - for Pro5 SoC - "socionext,uniphier-pxs2-aidet" - for PXs2/LD6b SoC - "socionext,uniphier-ld11-aidet" - for LD11 SoC - "socionext,uniphier-ld20-aidet" - for LD20 SoC - "socionext,uniphier-pxs3-aidet" - for PXs3 SoC -- reg: Specifies offset and length of the register set for the device. -- interrupt-controller: Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an interrupt - source. The value should be 2. The first cell defines the interrupt number - (corresponds to the SPI interrupt number of GIC). The second cell specifies - the trigger type as defined in interrupts.txt in this directory. - -Example: - - aidet: aidet@5fc20000 { - compatible = "socionext,uniphier-pro4-aidet"; - reg = <0x5fc20000 0x200>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml new file mode 100644 index 000000000000..f89ebde76dab --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/socionext,uniphier-aidet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier AIDET + +description: | + UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC + (Generic Interrupt Controller). GIC itself can handle only high level and + rising edge interrupts. The AIDET provides logic inverter to support low + level and falling edge interrupts. + +maintainers: + - Masahiro Yamada + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + enum: + - socionext,uniphier-ld4-aidet + - socionext,uniphier-pro4-aidet + - socionext,uniphier-sld8-aidet + - socionext,uniphier-pro5-aidet + - socionext,uniphier-pxs2-aidet + - socionext,uniphier-ld6b-aidet + - socionext,uniphier-ld11-aidet + - socionext,uniphier-ld20-aidet + - socionext,uniphier-pxs3-aidet + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: | + The first cell defines the interrupt number (corresponds to the SPI + interrupt number of GIC). The second cell specifies the trigger type as + defined in interrupts.txt in this directory. + const: 2 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + interrupt-controller@5fc20000 { + compatible = "socionext,uniphier-pro4-aidet"; + reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; -- cgit v1.2.3 From 7ebec90559ff772783208c88510632d0ced90da6 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 22 Feb 2020 20:20:42 +0900 Subject: dt-bindings: dma: Convert UniPhier MIO DMA controller to json-schema Convert the UniPhier MIO (Media I/O) DMA controller binding to DT schema format. While I was here, I added the resets property. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../bindings/dma/socionext,uniphier-mio-dmac.yaml | 63 ++++++++++++++++++++++ .../devicetree/bindings/dma/uniphier-mio-dmac.txt | 25 --------- 2 files changed, 63 insertions(+), 25 deletions(-) create mode 100644 Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml delete mode 100644 Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml new file mode 100644 index 000000000000..e7bf6dd7da29 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/socionext,uniphier-mio-dmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier Media IO DMA controller + +description: | + This works as an external DMA engine for SD/eMMC controllers etc. + found in UniPhier LD4, Pro4, sLD8 SoCs. + +maintainers: + - Masahiro Yamada + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + const: socionext,uniphier-mio-dmac + + reg: + maxItems: 1 + + interrupts: + description: | + A list of interrupt specifiers associated with the DMA channels. + The number of interrupt lines is SoC-dependent. + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + '#dma-cells': + description: The single cell represents the channel index. + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - '#dma-cells' + +additionalProperties: false + +examples: + - | + // In the example below, "interrupts = <0 68 4>, <0 68 4>, ..." is not a + // typo. The first two channels share a single interrupt line. + + dmac: dma-controller@5a000000 { + compatible = "socionext,uniphier-mio-dmac"; + reg = <0x5a000000 0x1000>; + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, + <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>; + clocks = <&mio_clk 7>; + resets = <&mio_rst 7>; + #dma-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt deleted file mode 100644 index b12388dc7eac..000000000000 --- a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt +++ /dev/null @@ -1,25 +0,0 @@ -UniPhier Media IO DMA controller - -This works as an external DMA engine for SD/eMMC controllers etc. -found in UniPhier LD4, Pro4, sLD8 SoCs. - -Required properties: -- compatible: should be "socionext,uniphier-mio-dmac". -- reg: offset and length of the register set for the device. -- interrupts: a list of interrupt specifiers associated with the DMA channels. -- clocks: a single clock specifier. -- #dma-cells: should be <1>. The single cell represents the channel index. - -Example: - dmac: dma-controller@5a000000 { - compatible = "socionext,uniphier-mio-dmac"; - reg = <0x5a000000 0x1000>; - interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, - <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>; - clocks = <&mio_clk 7>; - #dma-cells = <1>; - }; - -Note: -In the example above, "interrupts = <0 68 4>, <0 68 4>, ..." is not a typo. -The first two channels share a single interrupt line. -- cgit v1.2.3 From 8dbdf23ae30af3008428dec1d199d7646e13e70d Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 22 Feb 2020 20:25:41 +0900 Subject: dt-bindings: mmc: Convert UniPhier SD controller to json-schema Convert the UniPhier SD controller binding to DT schema format. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../bindings/mmc/socionext,uniphier-sd.yaml | 99 ++++++++++++++++++++++ .../devicetree/bindings/mmc/uniphier-sd.txt | 55 ------------ 2 files changed, 99 insertions(+), 55 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml delete mode 100644 Documentation/devicetree/bindings/mmc/uniphier-sd.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml new file mode 100644 index 000000000000..cdfac9b4411b --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/socionext,uniphier-sd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier SD/SDIO/eMMC controller + +maintainers: + - Masahiro Yamada + +properties: + compatible: + description: version 2.91, 3.1, 3.1.1, respectively + enum: + - socionext,uniphier-sd-v2.91 + - socionext,uniphier-sd-v3.1 + - socionext,uniphier-sd-v3.1.1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + reset-names: + description: | + There are three reset signals at maximum + host: mandatory for all variants + bridge: exist only for version 2.91 + hw: optional. exist if eMMC hw reset line is available + oneOf: + - const: host + - items: + - const: host + - const: bridge + - items: + - const: host + - const: hw + - items: + - const: host + - const: bridge + - const: hw + + resets: + minItems: 1 + maxItems: 3 + +allOf: + - $ref: mmc-controller.yaml + + - if: + properties: + compatible: + contains: + const: socionext,uniphier-sd-v2.91 + then: + properties: + reset-names: + contains: + const: bridge + else: + properties: + reset-names: + not: + contains: + const: bridge + +required: + - compatible + - reg + - interrupts + - clocks + - reset-names + - resets + +examples: + - | + sd: mmc@5a400000 { + compatible = "socionext,uniphier-sd-v2.91"; + reg = <0x5a400000 0x200>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&mio_clk 0>; + reset-names = "host", "bridge"; + resets = <&mio_rst 0>, <&mio_rst 3>; + dma-names = "rx-tx"; + dmas = <&dmac 4>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; diff --git a/Documentation/devicetree/bindings/mmc/uniphier-sd.txt b/Documentation/devicetree/bindings/mmc/uniphier-sd.txt deleted file mode 100644 index e1d658755722..000000000000 --- a/Documentation/devicetree/bindings/mmc/uniphier-sd.txt +++ /dev/null @@ -1,55 +0,0 @@ -UniPhier SD/eMMC controller - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-sd-v2.91" - IP version 2.91 - "socionext,uniphier-sd-v3.1" - IP version 3.1 - "socionext,uniphier-sd-v3.1.1" - IP version 3.1.1 -- reg: offset and length of the register set for the device. -- interrupts: a single interrupt specifier. -- clocks: a single clock specifier of the controller clock. -- reset-names: should contain the following: - "host" - mandatory for all versions - "bridge" - should exist only for "socionext,uniphier-sd-v2.91" - "hw" - should exist if eMMC hw reset line is available -- resets: a list of reset specifiers, corresponding to the reset-names - -Optional properties: -- pinctrl-names: if present, should contain the following: - "default" - should exist for all instances - "uhs" - should exist for SD instance with UHS support -- pinctrl-0: pin control state for the default mode -- pinctrl-1: pin control state for the UHS mode -- dma-names: should be "rx-tx" if present. - This property can exist only for "socionext,uniphier-sd-v2.91". -- dmas: a single DMA channel specifier - This property can exist only for "socionext,uniphier-sd-v2.91". -- bus-width: see mmc.txt -- cap-sd-highspeed: see mmc.txt -- cap-mmc-highspeed: see mmc.txt -- sd-uhs-sdr12: see mmc.txt -- sd-uhs-sdr25: see mmc.txt -- sd-uhs-sdr50: see mmc.txt -- cap-mmc-hw-reset: should exist if reset-names contains "hw". see mmc.txt -- non-removable: see mmc.txt - -Example: - - sd: sdhc@5a400000 { - compatible = "socionext,uniphier-sd-v2.91"; - reg = <0x5a400000 0x200>; - interrupts = <0 76 4>; - pinctrl-names = "default", "uhs"; - pinctrl-0 = <&pinctrl_sd>; - pinctrl-1 = <&pinctrl_sd_uhs>; - clocks = <&mio_clk 0>; - reset-names = "host", "bridge"; - resets = <&mio_rst 0>, <&mio_rst 3>; - dma-names = "rx-tx"; - dmas = <&dmac 4>; - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - }; -- cgit v1.2.3 From 82ba4997129a47b540d3d6714975b252f8353468 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 22 Feb 2020 23:19:26 +0900 Subject: dt-bindings: mtd: Convert Denali NAND controller to json-schema Convert the Denali NAND controller binding to DT schema format. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../devicetree/bindings/mtd/denali,nand.yaml | 148 +++++++++++++++++++++ .../devicetree/bindings/mtd/denali-nand.txt | 61 --------- 2 files changed, 148 insertions(+), 61 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/denali,nand.yaml delete mode 100644 Documentation/devicetree/bindings/mtd/denali-nand.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml new file mode 100644 index 000000000000..46e6b6726bc0 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/denali,nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Denali NAND controller + +maintainers: + - Masahiro Yamada + +properties: + compatible: + enum: + - altr,socfpga-denali-nand + - socionext,uniphier-denali-nand-v5a + - socionext,uniphier-denali-nand-v5b + + reg-names: + description: | + There are two register regions: + nand_data: host data/command interface + denali_reg: register interface + items: + - const: nand_data + - const: denali_reg + + reg: + minItems: 2 + maxItems: 2 + + interrupts: + maxItems: 1 + + clock-names: + description: | + There are three clocks: + nand: controller core clock + nand_x: bus interface clock + ecc: ECC circuit clock + items: + - const: nand + - const: nand_x + - const: ecc + + clocks: + minItems: 3 + maxItems: 3 + + reset-names: + description: | + There are two optional resets: + nand: controller core reset + reg: register reset + oneOf: + - items: + - const: nand + - const: reg + - const: nand + - const: reg + + resets: + minItems: 1 + maxItems: 2 + +allOf: + - $ref: nand-controller.yaml + + - if: + properties: + compatible: + contains: + const: altr,socfpga-denali-nand + then: + patternProperties: + "^nand@[a-f0-9]$": + type: object + properties: + nand-ecc-strength: + enum: + - 8 + - 15 + nand-ecc-step-size: + enum: + - 512 + + - if: + properties: + compatible: + contains: + const: socionext,uniphier-denali-nand-v5a + then: + patternProperties: + "^nand@[a-f0-9]$": + type: object + properties: + nand-ecc-strength: + enum: + - 8 + - 16 + - 24 + nand-ecc-step-size: + enum: + - 1024 + + - if: + properties: + compatible: + contains: + const: socionext,uniphier-denali-nand-v5b + then: + patternProperties: + "^nand@[a-f0-9]$": + type: object + properties: + nand-ecc-strength: + enum: + - 8 + - 16 + nand-ecc-step-size: + enum: + - 1024 + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + +examples: + - | + nand-controller@ff900000 { + compatible = "altr,socfpga-denali-nand"; + reg-names = "nand_data", "denali_reg"; + reg = <0xff900000 0x20>, <0xffb80000 0x1000>; + interrupts = <0 144 4>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; + reset-names = "nand", "reg"; + resets = <&nand_rst>, <&nand_reg_rst>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt deleted file mode 100644 index 98916a84bbf6..000000000000 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Denali NAND controller - -Required properties: - - compatible : should be one of the following: - "altr,socfpga-denali-nand" - for Altera SOCFPGA - "socionext,uniphier-denali-nand-v5a" - for Socionext UniPhier (v5a) - "socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b) - - reg : should contain registers location and length for data and reg. - - reg-names: Should contain the reg names "nand_data" and "denali_reg" - - #address-cells: should be 1. The cell encodes the chip select connection. - - #size-cells : should be 0. - - interrupts : The interrupt number. - - clocks: should contain phandle of the controller core clock, the bus - interface clock, and the ECC circuit clock. - - clock-names: should contain "nand", "nand_x", "ecc" - -Optional properties: - - resets: may contain phandles to the controller core reset, the register - reset - - reset-names: may contain "nand", "reg" - -Sub-nodes: - Sub-nodes represent available NAND chips. - - Required properties: - - reg: should contain the bank ID of the controller to which each chip - select is connected. - - Optional properties: - - nand-ecc-step-size: see nand-controller.yaml for details. - If present, the value must be - 512 for "altr,socfpga-denali-nand" - 1024 for "socionext,uniphier-denali-nand-v5a" - 1024 for "socionext,uniphier-denali-nand-v5b" - - nand-ecc-strength: see nand-controller.yaml for details. Valid values are: - 8, 15 for "altr,socfpga-denali-nand" - 8, 16, 24 for "socionext,uniphier-denali-nand-v5a" - 8, 16 for "socionext,uniphier-denali-nand-v5b" - - nand-ecc-maximize: see nand-controller.yaml for details - -The chip nodes may optionally contain sub-nodes describing partitions of the -address space. See partition.txt for more detail. - -Examples: - -nand: nand@ff900000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "altr,socfpga-denali-nand"; - reg = <0xff900000 0x20>, <0xffb80000 0x1000>; - reg-names = "nand_data", "denali_reg"; - clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; - clock-names = "nand", "nand_x", "ecc"; - resets = <&nand_rst>, <&nand_reg_rst>; - reset-names = "nand", "reg"; - interrupts = <0 144 4>; - - nand@0 { - reg = <0>; - } -}; -- cgit v1.2.3 From 06efe6482251520d171bf33b841f35c8677727ad Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 22 Feb 2020 23:34:44 +0900 Subject: dt-bindings: mmc: Convert Cadence SD/SDIO/eMMC controller to json-schema Convert the Cadence SD/SDIO/eMMC host controller IP (a.k.a. SD4HC) binding to DT schema format. Socionext UniPhier ARM 64-bit SoCs are integrated with this IP. Cc: Piotr Sroka Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 143 +++++++++++++++++++++ .../devicetree/bindings/mmc/sdhci-cadence.txt | 80 ------------ 2 files changed, 143 insertions(+), 80 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-cadence.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml new file mode 100644 index 000000000000..2f45dd0d04db --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/cdns,sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence SD/SDIO/eMMC Host Controller (SD4HC) + +maintainers: + - Masahiro Yamada + - Piotr Sroka + +allOf: + - $ref: mmc-controller.yaml + +properties: + compatible: + items: + - enum: + - socionext,uniphier-sd4hc + - const: cdns,sd4hc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + # PHY DLL input delays: + # They are used to delay the data valid window, and align the window to + # sampling clock. The delay starts from 5ns (for delay parameter equal to 0) + # and it is increased by 2.5ns in each step. + + cdns,phy-input-delay-sd-highspeed: + description: Value of the delay in the input path for SD high-speed timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-legacy: + description: Value of the delay in the input path for legacy timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-sd-uhs-sdr12: + description: Value of the delay in the input path for SD UHS SDR12 timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-sd-uhs-sdr25: + description: Value of the delay in the input path for SD UHS SDR25 timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-sd-uhs-sdr50: + description: Value of the delay in the input path for SD UHS SDR50 timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-sd-uhs-ddr50: + description: Value of the delay in the input path for SD UHS DDR50 timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-mmc-highspeed: + description: Value of the delay in the input path for MMC high-speed timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-mmc-ddr: + description: Value of the delay in the input path for eMMC high-speed DDR timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + # PHY DLL clock delays: + # Each delay property represents the fraction of the clock period. + # The approximate delay value will be + # (/128)*sdmclk_clock_period. + + cdns,phy-dll-delay-sdclk: + description: | + Value of the delay introduced on the sdclk output for all modes except + HS200, HS400 and HS400_ES. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x7f + + cdns,phy-dll-delay-sdclk-hsmmc: + description: | + Value of the delay introduced on the sdclk output for HS200, HS400 and + HS400_ES speed modes. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x7f + + cdns,phy-dll-delay-strobe: + description: | + Value of the delay introduced on the dat_strobe input used in + HS400 / HS400_ES speed modes. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x7f + +required: + - compatible + - reg + - interrupts + - clocks + +examples: + - | + emmc: mmc@5a000000 { + compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; + reg = <0x5a000000 0x400>; + interrupts = <0 78 4>; + clocks = <&clk 4>; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cdns,phy-dll-delay-sdclk = <0>; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt deleted file mode 100644 index fa423c277853..000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt +++ /dev/null @@ -1,80 +0,0 @@ -* Cadence SD/SDIO/eMMC Host Controller - -Required properties: -- compatible: should be one of the following: - "cdns,sd4hc" - default of the IP - "socionext,uniphier-sd4hc" - for Socionext UniPhier SoCs -- reg: offset and length of the register set for the device. -- interrupts: a single interrupt specifier. -- clocks: phandle to the input clock. - -Optional properties: -For eMMC configuration, supported speed modes are not indicated by the SDHCI -Capabilities Register. Instead, the following properties should be specified -if supported. See mmc.txt for details. -- mmc-ddr-1_8v -- mmc-ddr-1_2v -- mmc-hs200-1_8v -- mmc-hs200-1_2v -- mmc-hs400-1_8v -- mmc-hs400-1_2v - -Some PHY delays can be configured by following properties. -PHY DLL input delays: -They are used to delay the data valid window, and align the window -to sampling clock. The delay starts from 5ns (for delay parameter equal to 0) -and it is increased by 2.5ns in each step. -- cdns,phy-input-delay-sd-highspeed: - Value of the delay in the input path for SD high-speed timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-legacy: - Value of the delay in the input path for legacy timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-sd-uhs-sdr12: - Value of the delay in the input path for SD UHS SDR12 timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-sd-uhs-sdr25: - Value of the delay in the input path for SD UHS SDR25 timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-sd-uhs-sdr50: - Value of the delay in the input path for SD UHS SDR50 timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-sd-uhs-ddr50: - Value of the delay in the input path for SD UHS DDR50 timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-mmc-highspeed: - Value of the delay in the input path for MMC high-speed timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-mmc-ddr: - Value of the delay in the input path for eMMC high-speed DDR timing - Valid range = [0:0x1F]. - -PHY DLL clock delays: -Each delay property represents the fraction of the clock period. -The approximate delay value will be -(/128)*sdmclk_clock_period. -- cdns,phy-dll-delay-sdclk: - Value of the delay introduced on the sdclk output - for all modes except HS200, HS400 and HS400_ES. - Valid range = [0:0x7F]. -- cdns,phy-dll-delay-sdclk-hsmmc: - Value of the delay introduced on the sdclk output - for HS200, HS400 and HS400_ES speed modes. - Valid range = [0:0x7F]. -- cdns,phy-dll-delay-strobe: - Value of the delay introduced on the dat_strobe input - used in HS400 / HS400_ES speed modes. - Valid range = [0:0x7F]. - -Example: - emmc: sdhci@5a000000 { - compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; - reg = <0x5a000000 0x400>; - interrupts = <0 78 4>; - clocks = <&clk 4>; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - cdns,phy-dll-delay-sdclk = <0>; - }; -- cgit v1.2.3 From 73c3d1da3519defab71a7aa62963d0af72cd590f Mon Sep 17 00:00:00 2001 From: "Nícolas F. R. A. Prado" Date: Sat, 22 Feb 2020 20:00:59 +0000 Subject: dt-bindings: rng: Convert BCM2835 to DT schema MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Convert BCM2835/6368 Random number generator bindings to DT schema. Signed-off-by: Nícolas F. R. A. Prado Signed-off-by: Rob Herring --- .../devicetree/bindings/rng/brcm,bcm2835.txt | 40 --------------- .../devicetree/bindings/rng/brcm,bcm2835.yaml | 59 ++++++++++++++++++++++ 2 files changed, 59 insertions(+), 40 deletions(-) delete mode 100644 Documentation/devicetree/bindings/rng/brcm,bcm2835.txt create mode 100644 Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt deleted file mode 100644 index aaac7975f61c..000000000000 --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt +++ /dev/null @@ -1,40 +0,0 @@ -BCM2835/6368 Random number generator - -Required properties: - -- compatible : should be one of - "brcm,bcm2835-rng" - "brcm,bcm-nsp-rng" - "brcm,bcm5301x-rng" or - "brcm,bcm6368-rng" -- reg : Specifies base physical address and size of the registers. - -Optional properties: - -- clocks : phandle to clock-controller plus clock-specifier pair -- clock-names : "ipsec" as a clock name - -Optional properties: - -- interrupts: specify the interrupt for the RNG block - -Example: - -rng { - compatible = "brcm,bcm2835-rng"; - reg = <0x7e104000 0x10>; - interrupts = <2 29>; -}; - -rng@18033000 { - compatible = "brcm,bcm-nsp-rng"; - reg = <0x18033000 0x14>; -}; - -random: rng@10004180 { - compatible = "brcm,bcm6368-rng"; - reg = <0x10004180 0x14>; - - clocks = <&periph_clk 18>; - clock-names = "ipsec"; -}; diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml new file mode 100644 index 000000000000..42d9a38e4e1a --- /dev/null +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/brcm,bcm2835.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2835/6368 Random number generator + +maintainers: + - Stefan Wahren + - Florian Fainelli + - Herbert Xu + +properties: + compatible: + enum: + - brcm,bcm2835-rng + - brcm,bcm-nsp-rng + - brcm,bcm5301x-rng + - brcm,bcm6368-rng + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ipsec + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + rng { + compatible = "brcm,bcm2835-rng"; + reg = <0x7e104000 0x10>; + interrupts = <2 29>; + }; + + - | + rng@18033000 { + compatible = "brcm,bcm-nsp-rng"; + reg = <0x18033000 0x14>; + }; + + - | + rng@10004180 { + compatible = "brcm,bcm6368-rng"; + reg = <0x10004180 0x14>; + + clocks = <&periph_clk 18>; + clock-names = "ipsec"; + }; -- cgit v1.2.3 From 689e16ed2b1e559eb84e16651261e5bcbf13d7e3 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Sun, 23 Feb 2020 04:16:12 +0100 Subject: dt-bindings: vendor-prefixes: Add prefix for PocketBook International SA Call it "pocketbook". Signed-off-by: Ondrej Jirman Acked-by: Maxime Ripard Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index a97601e0e537..fcdda587def5 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -767,6 +767,8 @@ patternProperties: description: Broadcom Corporation (formerly PLX Technology) "^pni,.*": description: PNI Sensor Corporation + "^pocketbook,.*": + description: PocketBook International SA "^polaroid,.*": description: Polaroid Corporation "^portwell,.*": -- cgit v1.2.3 From 776ab6a3c2460404530345c270b90c51480c9473 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 24 Feb 2020 14:51:29 +0100 Subject: dt-bindings: reset: rcar-rst: Convert to json-schema MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Convert the Renesas R-Car Reset Controller Device Tree binding documentation to json-schema. Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Signed-off-by: Rob Herring --- .../devicetree/bindings/reset/renesas,rst.txt | 48 ----------------- .../devicetree/bindings/reset/renesas,rst.yaml | 63 ++++++++++++++++++++++ 2 files changed, 63 insertions(+), 48 deletions(-) delete mode 100644 Documentation/devicetree/bindings/reset/renesas,rst.txt create mode 100644 Documentation/devicetree/bindings/reset/renesas,rst.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt deleted file mode 100644 index de7f06ccd003..000000000000 --- a/Documentation/devicetree/bindings/reset/renesas,rst.txt +++ /dev/null @@ -1,48 +0,0 @@ -DT bindings for the Renesas R-Car and RZ/G Reset Controllers - -The R-Car and RZ/G Reset Controllers provide reset control, and implement the -following functions: - - Latching of the levels on mode pins when PRESET# is negated, - - Mode monitoring register, - - Reset control of peripheral devices (on R-Car Gen1), - - Watchdog timer (on R-Car Gen1), - - Register-based reset control and boot address registers for the various CPU - cores (on R-Car Gen2 and Gen3, and on RZ/G). - - -Required properties: - - compatible: Should be - - "renesas,-reset-wdt" for R-Car Gen1, - - "renesas,-rst" for R-Car Gen2 and Gen3, and RZ/G - Examples with soctypes are: - - "renesas,r8a7743-rst" (RZ/G1M) - - "renesas,r8a7744-rst" (RZ/G1N) - - "renesas,r8a7745-rst" (RZ/G1E) - - "renesas,r8a77470-rst" (RZ/G1C) - - "renesas,r8a774a1-rst" (RZ/G2M) - - "renesas,r8a774b1-rst" (RZ/G2N) - - "renesas,r8a774c0-rst" (RZ/G2E) - - "renesas,r8a7778-reset-wdt" (R-Car M1A) - - "renesas,r8a7779-reset-wdt" (R-Car H1) - - "renesas,r8a7790-rst" (R-Car H2) - - "renesas,r8a7791-rst" (R-Car M2-W) - - "renesas,r8a7792-rst" (R-Car V2H - - "renesas,r8a7793-rst" (R-Car M2-N) - - "renesas,r8a7794-rst" (R-Car E2) - - "renesas,r8a7795-rst" (R-Car H3) - - "renesas,r8a7796-rst" (R-Car M3-W) - - "renesas,r8a77961-rst" (R-Car M3-W+) - - "renesas,r8a77965-rst" (R-Car M3-N) - - "renesas,r8a77970-rst" (R-Car V3M) - - "renesas,r8a77980-rst" (R-Car V3H) - - "renesas,r8a77990-rst" (R-Car E3) - - "renesas,r8a77995-rst" (R-Car D3) - - reg: Address start and address range for the device. - - -Example: - - rst: reset-controller@e6160000 { - compatible = "renesas,r8a7795-rst"; - reg = <0 0xe6160000 0 0x0200>; - }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml new file mode 100644 index 000000000000..b5de1d196a13 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/renesas,rst.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas R-Car and RZ/G Reset Controller + +maintainers: + - Geert Uytterhoeven + - Magnus Damm + +description: | + The R-Car and RZ/G Reset Controllers provide reset control, and implement the + following functions: + - Latching of the levels on mode pins when PRESET# is negated, + - Mode monitoring register, + - Reset control of peripheral devices (on R-Car Gen1), + - Watchdog timer (on R-Car Gen1), + - Register-based reset control and boot address registers for the various + CPU cores (on R-Car Gen2 and Gen3, and on RZ/G). + +properties: + compatible: + enum: + - renesas,r8a7743-rst # RZ/G1M + - renesas,r8a7744-rst # RZ/G1N + - renesas,r8a7745-rst # RZ/G1E + - renesas,r8a77470-rst # RZ/G1C + - renesas,r8a774a1-rst # RZ/G2M + - renesas,r8a774b1-rst # RZ/G2N + - renesas,r8a774c0-rst # RZ/G2E + - renesas,r8a7778-reset-wdt # R-Car M1A + - renesas,r8a7779-reset-wdt # R-Car H1 + - renesas,r8a7790-rst # R-Car H2 + - renesas,r8a7791-rst # R-Car M2-W + - renesas,r8a7792-rst # R-Car V2H + - renesas,r8a7793-rst # R-Car M2-N + - renesas,r8a7794-rst # R-Car E2 + - renesas,r8a7795-rst # R-Car H3 + - renesas,r8a7796-rst # R-Car M3-W + - renesas,r8a77961-rst # R-Car M3-W+ + - renesas,r8a77965-rst # R-Car M3-N + - renesas,r8a77970-rst # R-Car V3M + - renesas,r8a77980-rst # R-Car V3H + - renesas,r8a77990-rst # R-Car E3 + - renesas,r8a77995-rst # R-Car D3 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7795-rst"; + reg = <0xe6160000 0x0200>; + }; -- cgit v1.2.3 From 8db9684beb500a4a1ec50aeadfe30f2e7e44fa24 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 24 Feb 2020 14:52:34 +0100 Subject: dt-bindings: power: rcar-sysc: Convert to json-schema MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Convert the Renesas R-Car System Controller Device Tree binding documentation to json-schema. Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Signed-off-by: Rob Herring --- .../bindings/power/renesas,rcar-sysc.txt | 62 ------------------ .../bindings/power/renesas,rcar-sysc.yaml | 73 ++++++++++++++++++++++ 2 files changed, 73 insertions(+), 62 deletions(-) delete mode 100644 Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt create mode 100644 Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt deleted file mode 100644 index acb41fade926..000000000000 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +++ /dev/null @@ -1,62 +0,0 @@ -DT bindings for the Renesas R-Car (RZ/G) System Controller - -== System Controller Node == - -The R-Car (RZ/G) System Controller provides power management for the CPU cores -and various coprocessors. - -Required properties: - - compatible: Must contain exactly one of the following: - - "renesas,r8a7743-sysc" (RZ/G1M) - - "renesas,r8a7744-sysc" (RZ/G1N) - - "renesas,r8a7745-sysc" (RZ/G1E) - - "renesas,r8a77470-sysc" (RZ/G1C) - - "renesas,r8a774a1-sysc" (RZ/G2M) - - "renesas,r8a774b1-sysc" (RZ/G2N) - - "renesas,r8a774c0-sysc" (RZ/G2E) - - "renesas,r8a7779-sysc" (R-Car H1) - - "renesas,r8a7790-sysc" (R-Car H2) - - "renesas,r8a7791-sysc" (R-Car M2-W) - - "renesas,r8a7792-sysc" (R-Car V2H) - - "renesas,r8a7793-sysc" (R-Car M2-N) - - "renesas,r8a7794-sysc" (R-Car E2) - - "renesas,r8a7795-sysc" (R-Car H3) - - "renesas,r8a7796-sysc" (R-Car M3-W) - - "renesas,r8a77961-sysc" (R-Car M3-W+) - - "renesas,r8a77965-sysc" (R-Car M3-N) - - "renesas,r8a77970-sysc" (R-Car V3M) - - "renesas,r8a77980-sysc" (R-Car V3H) - - "renesas,r8a77990-sysc" (R-Car E3) - - "renesas,r8a77995-sysc" (R-Car D3) - - reg: Address start and address range for the device. - - #power-domain-cells: Must be 1. - - -Example: - - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7791-sysc"; - reg = <0 0xe6180000 0 0x0200>; - #power-domain-cells = <1>; - }; - - -== PM Domain Consumers == - -Devices residing in a power area must refer to that power area, as documented -by the generic PM domain bindings in -Documentation/devicetree/bindings/power/power_domain.txt. - -Required properties: - - power-domains: A phandle and symbolic PM domain specifier, as defined in - . - - -Example: - - L2_CA15: cache-controller@0 { - compatible = "cache"; - power-domains = <&sysc R8A7791_PD_CA15_SCU>; - cache-unified; - cache-level = <2>; - }; diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml new file mode 100644 index 000000000000..e59331e1d944 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/renesas,rcar-sysc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas R-Car and RZ/G System Controller + +maintainers: + - Geert Uytterhoeven + - Magnus Damm + +description: + The R-Car (RZ/G) System Controller provides power management for the CPU + cores and various coprocessors. + +properties: + compatible: + enum: + - renesas,r8a7743-sysc # RZ/G1M + - renesas,r8a7744-sysc # RZ/G1N + - renesas,r8a7745-sysc # RZ/G1E + - renesas,r8a77470-sysc # RZ/G1C + - renesas,r8a774a1-sysc # RZ/G2M + - renesas,r8a774b1-sysc # RZ/G2N + - renesas,r8a774c0-sysc # RZ/G2E + - renesas,r8a7779-sysc # R-Car H1 + - renesas,r8a7790-sysc # R-Car H2 + - renesas,r8a7791-sysc # R-Car M2-W + - renesas,r8a7792-sysc # R-Car V2H + - renesas,r8a7793-sysc # R-Car M2-N + - renesas,r8a7794-sysc # R-Car E2 + - renesas,r8a7795-sysc # R-Car H3 + - renesas,r8a77961-sysc # R-Car M3-W+ + - renesas,r8a77965-sysc # R-Car M3-N + - renesas,r8a7796-sysc # R-Car M3-W + - renesas,r8a77970-sysc # R-Car V3M + - renesas,r8a77980-sysc # R-Car V3H + - renesas,r8a77990-sysc # R-Car E3 + - renesas,r8a77995-sysc # R-Car D3 + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + +required: + - compatible + - reg + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + // System Controller node + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7791-sysc"; + reg = <0xe6180000 0x0200>; + #power-domain-cells = <1>; + }; + + - | + // Power Domain consumers + #include + + cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A7791_PD_CA15_SCU>; + cache-unified; + cache-level = <2>; + }; -- cgit v1.2.3 From c1507cf227824827135bc7df5522ce0b3c50be73 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 24 Feb 2020 14:52:51 +0100 Subject: dt-bindings: power: apmu: Convert to json-schema Convert the Renesas Advanced Power Management Unit Device Tree binding documentation to json-schema. Signed-off-by: Geert Uytterhoeven Signed-off-by: Rob Herring --- .../devicetree/bindings/power/renesas,apmu.txt | 35 -------------- .../devicetree/bindings/power/renesas,apmu.yaml | 55 ++++++++++++++++++++++ 2 files changed, 55 insertions(+), 35 deletions(-) delete mode 100644 Documentation/devicetree/bindings/power/renesas,apmu.txt create mode 100644 Documentation/devicetree/bindings/power/renesas,apmu.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt deleted file mode 100644 index 5f24586c8cf3..000000000000 --- a/Documentation/devicetree/bindings/power/renesas,apmu.txt +++ /dev/null @@ -1,35 +0,0 @@ -DT bindings for the Renesas Advanced Power Management Unit - -Renesas R-Car and RZ/G1 SoCs utilize one or more APMU hardware units -for CPU core power domain control including SMP boot and CPU Hotplug. - -Required properties: - -- compatible: Should be "renesas,-apmu", "renesas,apmu" as fallback. - Examples with soctypes are: - - "renesas,r8a7743-apmu" (RZ/G1M) - - "renesas,r8a7744-apmu" (RZ/G1N) - - "renesas,r8a7745-apmu" (RZ/G1E) - - "renesas,r8a77470-apmu" (RZ/G1C) - - "renesas,r8a7790-apmu" (R-Car H2) - - "renesas,r8a7791-apmu" (R-Car M2-W) - - "renesas,r8a7792-apmu" (R-Car V2H) - - "renesas,r8a7793-apmu" (R-Car M2-N) - - "renesas,r8a7794-apmu" (R-Car E2) - -- reg: Base address and length of the I/O registers used by the APMU. - -- cpus: This node contains a list of CPU cores, which should match the order - of CPU cores used by the WUPCR and PSTR registers in the Advanced Power - Management Unit section of the device's datasheet. - - -Example: - -This shows the r8a7791 APMU that can control CPU0 and CPU1. - - apmu@e6152000 { - compatible = "renesas,r8a7791-apmu", "renesas,apmu"; - reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1>; - }; diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml new file mode 100644 index 000000000000..078b2cb40fe3 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/renesas,apmu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Advanced Power Management Unit + +maintainers: + - Geert Uytterhoeven + - Magnus Damm + +description: + Renesas R-Car Gen2 and RZ/G1 SoCs utilize one or more APMU hardware units for + CPU core power domain control including SMP boot and CPU Hotplug. + +properties: + compatible: + items: + - enum: + - renesas,r8a7743-apmu # RZ/G1M + - renesas,r8a7744-apmu # RZ/G1N + - renesas,r8a7745-apmu # RZ/G1E + - renesas,r8a77470-apmu # RZ/G1C + - renesas,r8a7790-apmu # R-Car H2 + - renesas,r8a7791-apmu # R-Car M2-W + - renesas,r8a7792-apmu # R-Car V2H + - renesas,r8a7793-apmu # R-Car M2-N + - renesas,r8a7794-apmu # R-Car E2 + - const: renesas,apmu + + reg: + maxItems: 1 + + cpus: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Array of phandles pointing to CPU cores, which should match the order of + CPU cores used by the WUPCR and PSTR registers in the Advanced Power + Management Unit section of the device's datasheet. + +required: + - compatible + - reg + - cpus + +additionalProperties: false + +examples: + - | + apmu@e6152000 { + compatible = "renesas,r8a7791-apmu", "renesas,apmu"; + reg = <0xe6152000 0x188>; + cpus = <&cpu0 &cpu1>; + }; -- cgit v1.2.3 From 76897807dc79747161429c984528cf8c6670b328 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 25 Feb 2020 10:03:28 +0900 Subject: dt-bindings: clock: Convert UniPhier clock to json-schema Convert the UniPhier clock controller binding to DT schema format. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../bindings/clock/socionext,uniphier-clock.yaml | 94 +++++++++++++++ .../devicetree/bindings/clock/uniphier-clock.txt | 132 --------------------- 2 files changed, 94 insertions(+), 132 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml delete mode 100644 Documentation/devicetree/bindings/clock/uniphier-clock.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml new file mode 100644 index 000000000000..c3930edc410f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/socionext,uniphier-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier clock controller + +maintainers: + - Masahiro Yamada + +properties: + compatible: + oneOf: + - description: System clock + enum: + - socionext,uniphier-ld4-clock + - socionext,uniphier-pro4-clock + - socionext,uniphier-sld8-clock + - socionext,uniphier-pro5-clock + - socionext,uniphier-pxs2-clock + - socionext,uniphier-ld6b-clock + - socionext,uniphier-ld11-clock + - socionext,uniphier-ld20-clock + - socionext,uniphier-pxs3-clock + - description: Media I/O (MIO) clock, SD clock + enum: + - socionext,uniphier-ld4-mio-clock + - socionext,uniphier-pro4-mio-clock + - socionext,uniphier-sld8-mio-clock + - socionext,uniphier-pro5-sd-clock + - socionext,uniphier-pxs2-sd-clock + - socionext,uniphier-ld11-mio-clock + - socionext,uniphier-ld20-sd-clock + - socionext,uniphier-pxs3-sd-clock + - description: Peripheral clock + enum: + - socionext,uniphier-ld4-peri-clock + - socionext,uniphier-pro4-peri-clock + - socionext,uniphier-sld8-peri-clock + - socionext,uniphier-pro5-peri-clock + - socionext,uniphier-pxs2-peri-clock + - socionext,uniphier-ld11-peri-clock + - socionext,uniphier-ld20-peri-clock + - socionext,uniphier-pxs3-peri-clock + + "#clock-cells": + const: 1 + +additionalProperties: false + +required: + - compatible + - "#clock-cells" + +examples: + - | + sysctrl@61840000 { + compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + clock { + compatible = "socionext,uniphier-ld11-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; + + - | + mioctrl@59810000 { + compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + clock { + compatible = "socionext,uniphier-ld11-mio-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; + + - | + perictrl@59820000 { + compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + clock { + compatible = "socionext,uniphier-ld11-peri-clock"; + #clock-cells = <1>; + }; + + // other nodes ... + }; diff --git a/Documentation/devicetree/bindings/clock/uniphier-clock.txt b/Documentation/devicetree/bindings/clock/uniphier-clock.txt deleted file mode 100644 index 7b5f602765fe..000000000000 --- a/Documentation/devicetree/bindings/clock/uniphier-clock.txt +++ /dev/null @@ -1,132 +0,0 @@ -UniPhier clock controller - - -System clock ------------- - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-clock" - for LD4 SoC. - "socionext,uniphier-pro4-clock" - for Pro4 SoC. - "socionext,uniphier-sld8-clock" - for sLD8 SoC. - "socionext,uniphier-pro5-clock" - for Pro5 SoC. - "socionext,uniphier-pxs2-clock" - for PXs2/LD6b SoC. - "socionext,uniphier-ld11-clock" - for LD11 SoC. - "socionext,uniphier-ld20-clock" - for LD20 SoC. - "socionext,uniphier-pxs3-clock" - for PXs3 SoC -- #clock-cells: should be 1. - -Example: - - sysctrl@61840000 { - compatible = "socionext,uniphier-sysctrl", - "simple-mfd", "syscon"; - reg = <0x61840000 0x4000>; - - clock { - compatible = "socionext,uniphier-ld11-clock"; - #clock-cells = <1>; - }; - - other nodes ... - }; - -Provided clocks: - - 8: ST DMAC -12: GIO (Giga bit stream I/O) -14: USB3 ch0 host -15: USB3 ch1 host -16: USB3 ch0 PHY0 -17: USB3 ch0 PHY1 -20: USB3 ch1 PHY0 -21: USB3 ch1 PHY1 - - -Media I/O (MIO) clock, SD clock -------------------------------- - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-mio-clock" - for LD4 SoC. - "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC. - "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC. - "socionext,uniphier-pro5-sd-clock" - for Pro5 SoC. - "socionext,uniphier-pxs2-sd-clock" - for PXs2/LD6b SoC. - "socionext,uniphier-ld11-mio-clock" - for LD11 SoC. - "socionext,uniphier-ld20-sd-clock" - for LD20 SoC. - "socionext,uniphier-pxs3-sd-clock" - for PXs3 SoC -- #clock-cells: should be 1. - -Example: - - mioctrl@59810000 { - compatible = "socionext,uniphier-mioctrl", - "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; - - clock { - compatible = "socionext,uniphier-ld11-mio-clock"; - #clock-cells = <1>; - }; - - other nodes ... - }; - -Provided clocks: - - 0: SD ch0 host - 1: eMMC host - 2: SD ch1 host - 7: MIO DMAC - 8: USB2 ch0 host - 9: USB2 ch1 host -10: USB2 ch2 host -12: USB2 ch0 PHY -13: USB2 ch1 PHY -14: USB2 ch2 PHY - - -Peripheral clock ----------------- - -Required properties: -- compatible: should be one of the following: - "socionext,uniphier-ld4-peri-clock" - for LD4 SoC. - "socionext,uniphier-pro4-peri-clock" - for Pro4 SoC. - "socionext,uniphier-sld8-peri-clock" - for sLD8 SoC. - "socionext,uniphier-pro5-peri-clock" - for Pro5 SoC. - "socionext,uniphier-pxs2-peri-clock" - for PXs2/LD6b SoC. - "socionext,uniphier-ld11-peri-clock" - for LD11 SoC. - "socionext,uniphier-ld20-peri-clock" - for LD20 SoC. - "socionext,uniphier-pxs3-peri-clock" - for PXs3 SoC -- #clock-cells: should be 1. - -Example: - - perictrl@59820000 { - compatible = "socionext,uniphier-perictrl", - "simple-mfd", "syscon"; - reg = <0x59820000 0x200>; - - clock { - compatible = "socionext,uniphier-ld11-peri-clock"; - #clock-cells = <1>; - }; - - other nodes ... - }; - -Provided clocks: - - 0: UART ch0 - 1: UART ch1 - 2: UART ch2 - 3: UART ch3 - 4: I2C ch0 - 5: I2C ch1 - 6: I2C ch2 - 7: I2C ch3 - 8: I2C ch4 - 9: I2C ch5 -10: I2C ch6 -- cgit v1.2.3 From c5f3f6ab5bc13da4432a11c6013e6b911a53c925 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 27 Feb 2020 21:36:48 +0900 Subject: dt-bindings: arm: Convert UniPhier System Cache to json-schema Convert the UniPhier System Cache binding to DT schema format. This is a full-custom outer cache (L2 and L3) used on UniPhier ARM 32-bit SoCs. While I was here, I added the interrupts property. This is not used in Linux, but the hardware has interrupt lines at least. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../bindings/arm/socionext/cache-uniphier.txt | 60 ------------ .../socionext/socionext,uniphier-system-cache.yaml | 102 +++++++++++++++++++++ 2 files changed, 102 insertions(+), 60 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt create mode 100644 Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt b/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt deleted file mode 100644 index d27a646f48a9..000000000000 --- a/Documentation/devicetree/bindings/arm/socionext/cache-uniphier.txt +++ /dev/null @@ -1,60 +0,0 @@ -UniPhier outer cache controller - -UniPhier SoCs are integrated with a full-custom outer cache controller system. -All of them have a level 2 cache controller, and some have a level 3 cache -controller as well. - -Required properties: -- compatible: should be "socionext,uniphier-system-cache" -- reg: offsets and lengths of the register sets for the device. It should - contain 3 regions: control register, revision register, operation register, - in this order. -- cache-unified: specifies the cache is a unified cache. -- cache-size: specifies the size in bytes of the cache -- cache-sets: specifies the number of associativity sets of the cache -- cache-line-size: specifies the line size in bytes -- cache-level: specifies the level in the cache hierarchy. The value should - be 2 for L2 cache, 3 for L3 cache, etc. - -Optional properties: -- next-level-cache: phandle to the next level cache if present. The next level - cache should be also compatible with "socionext,uniphier-system-cache". - -The L2 cache must exist to use the L3 cache; the cache hierarchy must be -indicated correctly with "next-level-cache" properties. - -Example 1 (system with L2): - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, - <0x506c0000 0x400>; - cache-unified; - cache-size = <0x80000>; - cache-sets = <256>; - cache-line-size = <128>; - cache-level = <2>; - }; - -Example 2 (system with L2 and L3): - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, - <0x506c0000 0x400>; - cache-unified; - cache-size = <0x200000>; - cache-sets = <512>; - cache-line-size = <128>; - cache-level = <2>; - next-level-cache = <&l3>; - }; - - l3: l3-cache@500c8000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, - <0x506c8000 0x400>; - cache-unified; - cache-size = <0x400000>; - cache-sets = <512>; - cache-line-size = <256>; - cache-level = <3>; - }; diff --git a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml new file mode 100644 index 000000000000..2e765bb3e6f6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/socionext/socionext,uniphier-system-cache.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier outer cache controller + +description: | + UniPhier ARM 32-bit SoCs are integrated with a full-custom outer cache + controller system. All of them have a level 2 cache controller, and some + have a level 3 cache controller as well. + +maintainers: + - Masahiro Yamada + +properties: + compatible: + const: socionext,uniphier-system-cache + + reg: + description: | + should contain 3 regions: control register, revision register, + operation register, in this order. + minItems: 3 + maxItems: 3 + + interrupts: + description: | + Interrupts can be used to notify the completion of cache operations. + The number of interrupts should match to the number of CPU cores. + The specified interrupts correspond to CPU0, CPU1, ... in this order. + minItems: 1 + maxItems: 4 + + cache-unified: true + + cache-size: true + + cache-sets: true + + cache-line-size: true + + cache-level: + minimum: 2 + maximum: 3 + + next-level-cache: true + +allOf: + - $ref: /schemas/cache-controller.yaml# + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - cache-unified + - cache-size + - cache-sets + - cache-line-size + - cache-level + +examples: + - | + // System with L2. + cache-controller@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <0x140000>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + }; + - | + // System with L2 and L3. + // L2 should specify the next level cache by 'next-level-cache'. + l2: cache-controller@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; + interrupts = <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <0x200000>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + next-level-cache = <&l3>; + }; + + l3: cache-controller@500c8000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <0x200000>; + cache-sets = <512>; + cache-line-size = <256>; + cache-level = <3>; + }; -- cgit v1.2.3 From f206c0eeb476f6eaa966f6e21a8831bb766f8659 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sat, 29 Feb 2020 16:15:04 +0100 Subject: dt-bindings: Add vendor prefix for Elida Shenzen Elida Technology Co. Ltd. is a Chinese TFT manufacturer. Signed-off-by: Heiko Stuebner Acked-by: Sam Ravnborg Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index fcdda587def5..d035e38d6ba3 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -285,6 +285,8 @@ patternProperties: description: Elan Microelectronic Corp. "^elgin,.*": description: Elgin S/A. + "^elida,.*": + description: Shenzhen Elida Technology Co., Ltd. "^embest,.*": description: Shenzhen Embest Technology Co., Ltd. "^emlid,.*": -- cgit v1.2.3 From f15652859cbe34ec4f3667169facd86309f438d2 Mon Sep 17 00:00:00 2001 From: Sam Shih Date: Wed, 4 Mar 2020 19:06:12 +0800 Subject: dt-bindings: pwm: Update bindings for MT7629 SoC This updates bindings for MT7629 pwm controller. Signed-off-by: Sam Shih Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/pwm/pwm-mediatek.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt index 95536d83c5f2..29adff59c479 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt @@ -19,10 +19,15 @@ Required properties: - "pwm1-8": the eight per PWM clocks for mt2712 - "pwm1-6": the six per PWM clocks for mt7622 - "pwm1-5": the five per PWM clocks for mt7623 + - "pwm1" : the PWM1 clock for mt7629 - pinctrl-names: Must contain a "default" entry. - pinctrl-0: One property must exist for each entry in pinctrl-names. See pinctrl/pinctrl-bindings.txt for details of the property values. +Optional properties: +- assigned-clocks: Reference to the PWM clock entries. +- assigned-clock-parents: The phandle of the parent clock of PWM clock. + Example: pwm0: pwm@11006000 { compatible = "mediatek,mt7623-pwm"; -- cgit v1.2.3 From ae9fdd23e6284979ba9829a2e7acdf295d554a32 Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Mon, 2 Mar 2020 14:39:10 +0100 Subject: dt-bindings: serial: snps-dw-apb-uart: add compatible property for rk3308 uart A test with the command below gives these errors: arch/arm64/boot/dts/rockchip/rk3308-evb.dt.yaml: serial@ff0d0000: compatible: ['rockchip,rk3308-uart', 'snps,dw-apb-uart'] is not valid under any of the given schemas arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dt.yaml: serial@ff0a0000: compatible: ['rockchip,rk3308-uart', 'snps,dw-apb-uart'] is not valid under any of the given schemas The compatible property for the Rockchip rk3308 uart was somehow never added to the documention. Fix this error by adding 'rockchip,rk3308-uart' to snps-dw-apb-uart.yaml. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/serial/ snps-dw-apb-uart.yaml Signed-off-by: Johan Jonker Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index b42002542690..b962f8db4ce9 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -27,6 +27,7 @@ properties: - rockchip,rk3066-uart - rockchip,rk3188-uart - rockchip,rk3288-uart + - rockchip,rk3308-uart - rockchip,rk3328-uart - rockchip,rk3368-uart - rockchip,rk3399-uart -- cgit v1.2.3 From 905fc6b1bfb4a631e8447da88de2998ebda547e8 Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Thu, 5 Mar 2020 01:55:37 +0100 Subject: dt-bindings: rcar-vin: Convert bindings to json-schema MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Convert Renesas R-Car VIN bindings documentation to json-schema. As the examples in the bindings now can be tested add a new one which describes how the both a parallel and a CSI-2 source can be connected on Gen3 SoCs. Signed-off-by: Niklas Söderlund Reviewed-by: Jacopo Mondi Signed-off-by: Rob Herring --- .../devicetree/bindings/media/renesas,vin.txt | 217 ----------- .../devicetree/bindings/media/renesas,vin.yaml | 402 +++++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 403 insertions(+), 218 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/renesas,vin.txt create mode 100644 Documentation/devicetree/bindings/media/renesas,vin.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt deleted file mode 100644 index 5eefd62ac5c5..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,vin.txt +++ /dev/null @@ -1,217 +0,0 @@ -Renesas R-Car Video Input driver (rcar_vin) -------------------------------------------- - -The rcar_vin device provides video input capabilities for the Renesas R-Car -family of devices. - -Each VIN instance has a single parallel input that supports RGB and YUV video, -with both external synchronization and BT.656 synchronization for the latter. -Depending on the instance the VIN input is connected to external SoC pins, or -on Gen3 and RZ/G2 platforms to a CSI-2 receiver. - - - compatible: Must be one or more of the following - - "renesas,vin-r8a7743" for the R8A7743 device - - "renesas,vin-r8a7744" for the R8A7744 device - - "renesas,vin-r8a7745" for the R8A7745 device - - "renesas,vin-r8a77470" for the R8A77470 device - - "renesas,vin-r8a774a1" for the R8A774A1 device - - "renesas,vin-r8a774b1" for the R8A774B1 device - - "renesas,vin-r8a774c0" for the R8A774C0 device - - "renesas,vin-r8a7778" for the R8A7778 device - - "renesas,vin-r8a7779" for the R8A7779 device - - "renesas,vin-r8a7790" for the R8A7790 device - - "renesas,vin-r8a7791" for the R8A7791 device - - "renesas,vin-r8a7792" for the R8A7792 device - - "renesas,vin-r8a7793" for the R8A7793 device - - "renesas,vin-r8a7794" for the R8A7794 device - - "renesas,vin-r8a7795" for the R8A7795 device - - "renesas,vin-r8a7796" for the R8A7796 device - - "renesas,vin-r8a77965" for the R8A77965 device - - "renesas,vin-r8a77970" for the R8A77970 device - - "renesas,vin-r8a77980" for the R8A77980 device - - "renesas,vin-r8a77990" for the R8A77990 device - - "renesas,vin-r8a77995" for the R8A77995 device - - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible - device. - - When compatible with the generic version nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - - - reg: the register base and size for the device registers - - interrupts: the interrupt for the device - - clocks: Reference to the parent clock - -The per-board settings for Gen2 and RZ/G1 platforms: - -- port - sub-node describing a single endpoint connected to the VIN - from external SoC pins as described in video-interfaces.txt[1]. - Only the first one will be considered as each vin interface has one - input port. - - - Optional properties for endpoint nodes: - - hsync-active: see [1] for description. Default is active high. - - vsync-active: see [1] for description. Default is active high. - If both HSYNC and VSYNC polarities are not specified, embedded - synchronization is selected. - - field-active-even: see [1] for description. Default is active high. - - bus-width: see [1] for description. The selected bus width depends on - the SoC type and selected input image format. - Valid values are: 8, 10, 12, 16, 24 and 32. - - data-shift: see [1] for description. Valid values are 0 and 8. - - data-enable-active: polarity of CLKENB signal, see [1] for - description. Default is active high. - -The per-board settings for Gen3 and RZ/G2 platforms: - -Gen3 and RZ/G2 platforms can support both a single connected parallel input -source from external SoC pins (port@0) and/or multiple parallel input sources -from local SoC CSI-2 receivers (port@1) depending on SoC. - -- renesas,id - ID number of the VIN, VINx in the documentation. -- ports - - port@0 - sub-node describing a single endpoint connected to the VIN - from external SoC pins as described in video-interfaces.txt[1]. - Describing more than one endpoint in port@0 is invalid. Only VIN - instances that are connected to external pins should have port@0. - - Endpoint nodes of port@0 support the optional properties listed in - the Gen2 per-board settings description. - - - port@1 - sub-nodes describing one or more endpoints connected to - the VIN from local SoC CSI-2 receivers. The endpoint numbers must - use the following schema. - - - endpoint@0 - sub-node describing the endpoint connected to CSI20 - - endpoint@1 - sub-node describing the endpoint connected to CSI21 - - endpoint@2 - sub-node describing the endpoint connected to CSI40 - - endpoint@3 - sub-node describing the endpoint connected to CSI41 - - Endpoint nodes of port@1 do not support any optional endpoint property. - -Device node example for Gen2 platforms --------------------------------------- - - aliases { - vin0 = &vin0; - }; - - vin0: vin@e6ef0000 { - compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; - clocks = <&mstp8_clks R8A7790_CLK_VIN0>; - reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - -Board setup example for Gen2 platforms (vin1 composite video input) -------------------------------------------------------------------- - -&i2c2 { - status = "okay"; - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - remote = <&vin1>; - - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin1ep0>; - }; - }; - }; -}; - -/* composite video input */ -&vin1 { - pinctrl-0 = <&vin1_pins>; - pinctrl-names = "default"; - - status = "okay"; - - port { - vin1ep0: endpoint { - remote-endpoint = <&adv7180>; - bus-width = <8>; - }; - }; -}; - -Device node example for Gen3 platforms --------------------------------------- - - vin0: video@e6ef0000 { - compatible = "renesas,vin-r8a7795"; - reg = <0 0xe6ef0000 0 0x1000>; - interrupts = ; - clocks = <&cpg CPG_MOD 811>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 811>; - renesas,id = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <1>; - - vin0csi20: endpoint@0 { - reg = <0>; - remote-endpoint= <&csi20vin0>; - }; - vin0csi21: endpoint@1 { - reg = <1>; - remote-endpoint= <&csi21vin0>; - }; - vin0csi40: endpoint@2 { - reg = <2>; - remote-endpoint= <&csi40vin0>; - }; - }; - }; - }; - - csi20: csi2@fea80000 { - compatible = "renesas,r8a7795-csi2"; - reg = <0 0xfea80000 0 0x10000>; - interrupts = ; - clocks = <&cpg CPG_MOD 714>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 714>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - csi20_in: endpoint { - clock-lanes = <0>; - data-lanes = <1>; - remote-endpoint = <&adv7482_txb>; - }; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <1>; - - csi20vin0: endpoint@0 { - reg = <0>; - remote-endpoint = <&vin0csi20>; - }; - }; - }; - }; - -[1] video-interfaces.txt common video media interface diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml new file mode 100644 index 000000000000..1ec947b4781f --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -0,0 +1,402 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2020 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,vin.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Video Input (VIN) + +maintainers: + - Niklas Söderlund + +description: + The R-Car Video Input (VIN) device provides video input capabilities for the + Renesas R-Car family of devices. + + Each VIN instance has a single parallel input that supports RGB and YUV video, + with both external synchronization and BT.656 synchronization for the latter. + Depending on the instance the VIN input is connected to external SoC pins, or + on Gen3 and RZ/G2 platforms to a CSI-2 receiver. + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,vin-r8a7743 # RZ/G1M + - renesas,vin-r8a7744 # RZ/G1N + - renesas,vin-r8a7745 # RZ/G1E + - renesas,vin-r8a77470 # RZ/G1C + - renesas,vin-r8a7790 # R-Car H2 + - renesas,vin-r8a7791 # R-Car M2-W + - renesas,vin-r8a7792 # R-Car V2H + - renesas,vin-r8a7793 # R-Car M2-N + - renesas,vin-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-vin # Generic R-Car Gen2 or RZ/G1 + + - items: + - enum: + - renesas,vin-r8a774a1 # RZ/G2M + - renesas,vin-r8a774b1 # RZ/G2N + - renesas,vin-r8a774c0 # RZ/G2E + - renesas,vin-r8a7778 # R-Car M1 + - renesas,vin-r8a7779 # R-Car H1 + - renesas,vin-r8a7795 # R-Car H3 + - renesas,vin-r8a7796 # R-Car M3-W + - renesas,vin-r8a77965 # R-Car M3-N + - renesas,vin-r8a77970 # R-Car V3M + - renesas,vin-r8a77980 # R-Car V3H + - renesas,vin-r8a77990 # R-Car E3 + - renesas,vin-r8a77995 # R-Car D3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + #The per-board settings for Gen2 and RZ/G1 platforms: + port: + type: object + description: + A node containing a parallel input with a single endpoint definitions as + documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + + properties: + endpoint: + type: object + + properties: + hsync-active: + description: + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + default: 1 + + vsync-active: + description: + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + default: 1 + + field-active-even: true + + bus-width: true + + data-shift: true + + data-enable-active: + description: Polarity of CLKENB signal + default: 1 + + pclk-sample: true + + data-active: true + + remote-endpoint: true + + required: + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + + #The per-board settings for Gen3 and RZ/G2 platforms: + renesas,id: + description: VIN channel number + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 15 + + ports: + type: object + description: + A node containing input nodes with endpoint definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + + properties: + port@0: + type: object + description: + Input port node, single endpoint describing a parallel input source. + + properties: + reg: + const: 0 + + endpoint: + type: object + + properties: + hsync-active: + description: + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + default: 1 + + vsync-active: + description: + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + default: 1 + + field-active-even: true + + bus-width: true + + data-shift: true + + data-enable-active: + description: Polarity of CLKENB signal + default: 1 + + pclk-sample: true + + data-active: true + + remote-endpoint: true + + required: + - remote-endpoint + + additionalProperties: false + + required: + - endpoint + + additionalProperties: false + + port@1: + type: object + description: + Input port node, multiple endpoints describing all the R-Car CSI-2 + modules connected the VIN. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + const: 1 + + endpoint@0: + type: object + description: Endpoint connected to CSI20. + + properties: + reg: + const: 0 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + endpoint@1: + type: object + description: Endpoint connected to CSI21. + + properties: + reg: + const: 1 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + endpoint@2: + type: object + description: Endpoint connected to CSI40. + + properties: + reg: + const: 2 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + endpoint@3: + type: object + description: Endpoint connected to CSI41. + + properties: + reg: + const: 3 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + anyOf: + - required: + - endpoint@0 + - required: + - endpoint@1 + - required: + - endpoint@2 + - required: + - endpoint@3 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + +if: + properties: + compatible: + contains: + enum: + - renesas,vin-r8a7778 + - renesas,vin-r8a7779 + - renesas,rcar-gen2-vin +then: + required: + - port +else: + required: + - renesas,id + - ports + +additionalProperties: false + +examples: + # Device node example for Gen2 platform + - | + #include + #include + #include + + vin1: vin@e6ef1000 { + compatible = "renesas,vin-r8a7790", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 810>; + + port { + vin1ep0: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; + }; + + # Device node example for Gen3 platform with only CSI-2 + - | + #include + #include + #include + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7795"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi20: endpoint@0 { + reg = <0>; + remote-endpoint= <&csi20vin0>; + }; + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint= <&csi40vin0>; + }; + }; + }; + }; + + # Device node example for Gen3 platform with CSI-2 and parallel + - | + #include + #include + #include + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a77970"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vin2_in: endpoint { + remote-endpoint = <&adv7612_out>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin2>; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 04b5ad842fbc..de04a82e1874 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10434,7 +10434,7 @@ L: linux-renesas-soc@vger.kernel.org T: git git://linuxtv.org/media_tree.git S: Supported F: Documentation/devicetree/bindings/media/renesas,csi2.yaml -F: Documentation/devicetree/bindings/media/renesas,vin.txt +F: Documentation/devicetree/bindings/media/renesas,vin.yaml F: drivers/media/platform/rcar-vin/ MEDIA DRIVERS FOR RENESAS - VSP1 -- cgit v1.2.3 From 87ff65b598fd73022d26f4fc7519e86388dcd355 Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Thu, 5 Mar 2020 15:36:07 +0100 Subject: dt-bindings: i2c: convert rockchip i2c bindings to yaml Current dts files with 'i2c' nodes are manually verified. In order to automate this process i2c-rk3x.txt has to be converted to yaml. In the new setup i2c-rk3x.yaml will inherit properties from i2c-controller.yaml. Also change document name in MAINTAINERS. Signed-off-by: Johan Jonker Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/i2c/i2c-rk3x.txt | 68 ----------- .../devicetree/bindings/i2c/i2c-rk3x.yaml | 129 +++++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 130 insertions(+), 69 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-rk3x.txt create mode 100644 Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt deleted file mode 100644 index 22f2eeb2c4c9..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt +++ /dev/null @@ -1,68 +0,0 @@ -* Rockchip RK3xxx I2C controller - -This driver interfaces with the native I2C controller present in Rockchip -RK3xxx SoCs. - -Required properties : - - - reg : Offset and length of the register set for the device - - compatible: should be one of the following: - - "rockchip,rv1108-i2c": for rv1108 - - "rockchip,rk3066-i2c": for rk3066 - - "rockchip,rk3188-i2c": for rk3188 - - "rockchip,rk3228-i2c": for rk3228 - - "rockchip,rk3288-i2c": for rk3288 - - "rockchip,rk3328-i2c", "rockchip,rk3399-i2c": for rk3328 - - "rockchip,rk3399-i2c": for rk3399 - - interrupts : interrupt number - - clocks: See ../clock/clock-bindings.txt - - For older hardware (rk3066, rk3188, rk3228, rk3288): - - There is one clock that's used both to derive the functional clock - for the device and as the bus clock. - - For newer hardware (rk3399): specified by name - - "i2c": This is used to derive the functional clock. - - "pclk": This is the bus clock. - -Required on RK3066, RK3188 : - - - rockchip,grf : the phandle of the syscon node for the general register - file (GRF) - - on those SoCs an alias with the correct I2C bus ID (bit offset in the GRF) - is also required. - -Optional properties : - - - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used. - - i2c-scl-rising-time-ns : Number of nanoseconds the SCL signal takes to rise - (t(r) in I2C specification). If not specified this is assumed to be - the maximum the specification allows(1000 ns for Standard-mode, - 300 ns for Fast-mode) which might cause slightly slower communication. - - i2c-scl-falling-time-ns : Number of nanoseconds the SCL signal takes to fall - (t(f) in the I2C specification). If not specified this is assumed to - be the maximum the specification allows (300 ns) which might cause - slightly slower communication. - - i2c-sda-falling-time-ns : Number of nanoseconds the SDA signal takes to fall - (t(f) in the I2C specification). If not specified we'll use the SCL - value since they are the same in nearly all cases. - -Example: - -aliases { - i2c0 = &i2c0; -} - -i2c0: i2c@2002d000 { - compatible = "rockchip,rk3188-i2c"; - reg = <0x2002d000 0x1000>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - - rockchip,grf = <&grf>; - - clock-names = "i2c"; - clocks = <&cru PCLK_I2C0>; - - i2c-scl-rising-time-ns = <800>; - i2c-scl-falling-time-ns = <100>; -}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml new file mode 100644 index 000000000000..962aefb7d052 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-rk3x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3xxx I2C controller + +description: + This driver interfaces with the native I2C controller present in Rockchip + RK3xxx SoCs. + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +maintainers: + - Heiko Stuebner + +# Everything else is described in the common file +properties: + compatible: + oneOf: + - const: rockchip,rv1108-i2c + - const: rockchip,rk3066-i2c + - const: rockchip,rk3188-i2c + - const: rockchip,rk3228-i2c + - const: rockchip,rk3288-i2c + - const: rockchip,rk3399-i2c + - items: + - enum: + - rockchip,rk3328-i2c + - const: rockchip,rk3399-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: + For older hardware (rk3066, rk3188, rk3228, rk3288) + there is one clock that is used both to derive the functional clock + for the device and as the bus clock. + For newer hardware (rk3399) this clock is used to derive + the functional clock + - description: + For newer hardware (rk3399) this is the bus clock + + clock-names: + minItems: 1 + items: + - const: i2c + - const: pclk + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Required on RK3066, RK3188 the phandle of the syscon node for + the general register file (GRF) + On those SoCs an alias with the correct I2C bus ID + (bit offset in the GRF) is also required. + + clock-frequency: + default: 100000 + description: + SCL frequency to use (in Hz). If omitted, 100kHz is used. + + i2c-scl-rising-time-ns: + default: 1000 + description: + Number of nanoseconds the SCL signal takes to rise + (t(r) in I2C specification). If not specified this is assumed to be + the maximum the specification allows(1000 ns for Standard-mode, + 300 ns for Fast-mode) which might cause slightly slower communication. + + i2c-scl-falling-time-ns: + default: 300 + description: + Number of nanoseconds the SCL signal takes to fall + (t(f) in the I2C specification). If not specified this is assumed to + be the maximum the specification allows (300 ns) which might cause + slightly slower communication. + + i2c-sda-falling-time-ns: + default: 300 + description: + Number of nanoseconds the SDA signal takes to fall + (t(f) in the I2C specification). If not specified we will use the SCL + value since they are the same in nearly all cases. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +if: + properties: + compatible: + contains: + enum: + - rockchip,rk3066-i2c + - rockchip,rk3188-i2c + +then: + required: + - rockchip,grf + +examples: + - | + #include + #include + #include + i2c0: i2c@2002d000 { + compatible = "rockchip,rk3188-i2c"; + reg = <0x2002d000 0x1000>; + interrupts = ; + clocks = <&cru PCLK_I2C0>; + clock-names = "i2c"; + rockchip,grf = <&grf>; + i2c-scl-falling-time-ns = <100>; + i2c-scl-rising-time-ns = <800>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index de04a82e1874..b4cb364cd019 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2274,7 +2274,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-rockchip@lists.infradead.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git S: Maintained -F: Documentation/devicetree/bindings/i2c/i2c-rk3x.txt +F: Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml F: Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml F: arch/arm/boot/dts/rk3* F: arch/arm/boot/dts/rv1108* -- cgit v1.2.3 From e44296eaa3cb7ebec701a98911f3df5972264654 Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Thu, 5 Mar 2020 15:36:08 +0100 Subject: dt-bindings: i2c: i2c-rk3x: add description for rk3036 The description below is already in use for rk3036.dtsi, but was somehow never added to a document, so add "rockchip,rk3036-i2c", "rockchip,rk3288-i2c" for i2c nodes on a rk3036 platform to i2c-rk3x.yaml. Signed-off-by: Johan Jonker Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml index 962aefb7d052..0bba39998bcd 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -26,6 +26,10 @@ properties: - const: rockchip,rk3228-i2c - const: rockchip,rk3288-i2c - const: rockchip,rk3399-i2c + - items: + - enum: + - rockchip,rk3036-i2c + - const: rockchip,rk3288-i2c - items: - enum: - rockchip,rk3328-i2c -- cgit v1.2.3 From e5b250df78b6c56d4525fd76da18635f1d7312f8 Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Thu, 5 Mar 2020 15:36:09 +0100 Subject: dt-bindings: i2c: i2c-rk3x: add description for rk3368 The description below is already in use for rk3368.dtsi, but was somehow never added to a document, so add "rockchip,rk3368-i2c", "rockchip,rk3288-i2c" for i2c nodes on a rk3368 platform to i2c-rk3x.yaml. Signed-off-by: Johan Jonker Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml index 0bba39998bcd..67cdce8fbd7d 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -29,6 +29,7 @@ properties: - items: - enum: - rockchip,rk3036-i2c + - rockchip,rk3368-i2c - const: rockchip,rk3288-i2c - items: - enum: -- cgit v1.2.3 From 9354371ded2445f674625397b5aaf9ceb881b110 Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Thu, 5 Mar 2020 15:36:10 +0100 Subject: dt-bindings: i2c: i2c-rk3x: add description for rk3308 The description below is already in use for rk3308.dtsi, but was somehow never added to a document, so add "rockchip,rk3308-i2c", "rockchip,rk3399-i2c" for i2c nodes on a rk3308 platform to i2c-rk3x.yaml. Signed-off-by: Johan Jonker Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml index 67cdce8fbd7d..edee8f699c2e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -33,6 +33,7 @@ properties: - const: rockchip,rk3288-i2c - items: - enum: + - rockchip,rk3308-i2c - rockchip,rk3328-i2c - const: rockchip,rk3399-i2c -- cgit v1.2.3 From a0f17945355a33c7ef47da105c9e11a667e01c4f Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Thu, 5 Mar 2020 15:36:11 +0100 Subject: dt-bindings: i2c: i2c-rk3x: add description for px30 The description below is already in use for px30.dtsi, but was somehow never added to a document, so add "rockchip,px30-i2c", "rockchip,rk3399-i2c" for i2c nodes on a px30 platform to i2c-rk3x.yaml. Signed-off-by: Johan Jonker Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml index edee8f699c2e..61eac76c84c4 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -33,6 +33,7 @@ properties: - const: rockchip,rk3288-i2c - items: - enum: + - rockchip,px30-i2c - rockchip,rk3308-i2c - rockchip,rk3328-i2c - const: rockchip,rk3399-i2c -- cgit v1.2.3 From e329f87dc41a3f397be403dd7e1889e541eb78cf Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 6 Mar 2020 03:30:13 +0530 Subject: dt-bindings: arm: cpus: Add kryo280 compatible Kryo280 is found in msm8998, so add it to the list of cpu compatibles. Signed-off-by: Amit Kucheria Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/cpus.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 31b391a24b70..470e003b7f8a 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -165,6 +165,7 @@ properties: - qcom,krait - qcom,kryo - qcom,kryo260 + - qcom,kryo280 - qcom,kryo385 - qcom,kryo485 - qcom,scorpion -- cgit v1.2.3 From 431a30b7d495be19790bb347e68a87d03599fe8e Mon Sep 17 00:00:00 2001 From: Prashant Malani Date: Thu, 5 Mar 2020 14:27:28 -0800 Subject: dt-bindings: Convert usb-connector to YAML format. Convert the usb-connector.txt bindings file to YAML format. This allows it to be used in dt_bindings_check verification. This patch was born out of a patch series for the addition of a Type C connector class port driver[1]. An attempt has been made to maintain the same documentation text and example structure as was in the .txt file, but wherever needed modifications have been made to satisfy dt_bindings_check. Also, update all references to usb-connector.txt to now use usb-connector.yaml. [1]: https://lkml.org/lkml/2020/2/19/1232 Signed-off-by: Prashant Malani Reviewed-by: Benson Leung Signed-off-by: Rob Herring --- .../connector/samsung,usb-connector-11pin.txt | 2 +- .../bindings/connector/usb-connector.txt | 135 -------------- .../bindings/connector/usb-connector.yaml | 206 +++++++++++++++++++++ .../devicetree/bindings/usb/fcs,fusb302.txt | 2 +- Documentation/devicetree/bindings/usb/generic.txt | 2 +- .../devicetree/bindings/usb/mediatek,mtu3.txt | 2 +- .../devicetree/bindings/usb/mediatek,musb.txt | 2 +- .../devicetree/bindings/usb/richtek,rt1711h.txt | 2 +- .../devicetree/bindings/usb/ti,hd3ss3220.txt | 2 +- .../devicetree/bindings/usb/typec-tcpci.txt | 2 +- .../devicetree/bindings/usb/usb-conn-gpio.txt | 4 +- 11 files changed, 216 insertions(+), 145 deletions(-) delete mode 100644 Documentation/devicetree/bindings/connector/usb-connector.txt create mode 100644 Documentation/devicetree/bindings/connector/usb-connector.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt index 22256e295a7a..3dd8961154ab 100644 --- a/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt +++ b/Documentation/devicetree/bindings/connector/samsung,usb-connector-11pin.txt @@ -19,7 +19,7 @@ Required nodes: 0: High Speed (HS), 3: Mobile High-Definition Link (MHL), specific to 11-pin Samsung micro-USB. -[1]: bindings/connector/usb-connector.txt +[1]: bindings/connector/usb-connector.yaml Example ------- diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt deleted file mode 100644 index 88578ac1a8a7..000000000000 --- a/Documentation/devicetree/bindings/connector/usb-connector.txt +++ /dev/null @@ -1,135 +0,0 @@ -USB Connector -============= - -A USB connector node represents a physical USB connector. It should be -a child of a USB interface controller. - -Required properties: -- compatible: describes type of the connector, must be one of: - "usb-a-connector", - "usb-b-connector", - "usb-c-connector". - -Optional properties: -- label: symbolic name for the connector, -- type: size of the connector, should be specified in case of USB-A, USB-B - non-fullsize connectors: "mini", "micro". -- self-powered: Set this property if the usb device that has its own power - source. - -Optional properties for usb-b-connector: -- id-gpios: an input gpio for USB ID pin. -- vbus-gpios: an input gpio for USB VBUS pin, used to detect presence of - VBUS 5V. - see gpio/gpio.txt. -- vbus-supply: a phandle to the regulator for USB VBUS if needed when host - mode or dual role mode is supported. - Particularly, if use an output GPIO to control a VBUS regulator, should - model it as a regulator. - see regulator/fixed-regulator.yaml -- pinctrl-names : a pinctrl state named "default" is optional -- pinctrl-0 : pin control group - see pinctrl/pinctrl-bindings.txt - -Optional properties for usb-c-connector: -- power-role: should be one of "source", "sink" or "dual"(DRP) if typec - connector has power support. -- try-power-role: preferred power role if "dual"(DRP) can support Try.SNK - or Try.SRC, should be "sink" for Try.SNK or "source" for Try.SRC. -- data-role: should be one of "host", "device", "dual"(DRD) if typec - connector supports USB data. - -Required properties for usb-c-connector with power delivery support: -- source-pdos: An array of u32 with each entry providing supported power - source data object(PDO), the detailed bit definitions of PDO can be found - in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2 - Source_Capabilities Message, the order of each entry(PDO) should follow - the PD spec chapter 6.4.1. Required for power source and power dual role. - User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() - defined in dt-bindings/usb/pd.h. -- sink-pdos: An array of u32 with each entry providing supported power - sink data object(PDO), the detailed bit definitions of PDO can be found - in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3 - Sink Capabilities Message, the order of each entry(PDO) should follow - the PD spec chapter 6.4.1. Required for power sink and power dual role. - User can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined - in dt-bindings/usb/pd.h. -- op-sink-microwatt: Sink required operating power in microwatt, if source - can't offer the power, Capability Mismatch is set. Required for power - sink and power dual role. - -Required nodes: -- any data bus to the connector should be modeled using the OF graph bindings - specified in bindings/graph.txt, unless the bus is between parent node and - the connector. Since single connector can have multiple data buses every bus - has assigned OF graph port number as follows: - 0: High Speed (HS), present in all connectors, - 1: Super Speed (SS), present in SS capable connectors, - 2: Sideband use (SBU), present in USB-C. - -Examples --------- - -1. Micro-USB connector with HS lines routed via controller (MUIC): - -muic-max77843@66 { - ... - usb_con: connector { - compatible = "usb-b-connector"; - label = "micro-USB"; - type = "micro"; - }; -}; - -2. USB-C connector attached to CC controller (s2mm005), HS lines routed -to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort. -DisplayPort video lines are routed to the connector via SS mux in USB3 PHY. - -ccic: s2mm005@33 { - ... - usb_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - usb_con_hs: endpoint { - remote-endpoint = <&max77865_usbc_hs>; - }; - }; - port@1 { - reg = <1>; - usb_con_ss: endpoint { - remote-endpoint = <&usbdrd_phy_ss>; - }; - }; - port@2 { - reg = <2>; - usb_con_sbu: endpoint { - remote-endpoint = <&dp_aux>; - }; - }; - }; - }; -}; - -3. USB-C connector attached to a typec port controller(ptn5110), which has -power delivery support and enables drp. - -typec: ptn5110@50 { - ... - usb_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - try-power-role = "sink"; - source-pdos = ; - sink-pdos = ; - op-sink-microwatt = <10000000>; - }; -}; diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml new file mode 100644 index 000000000000..4638d7adb806 --- /dev/null +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/connector/usb-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB Connector + +maintainers: + - Rob Herring + +description: + A USB connector node represents a physical USB connector. It should be a child + of a USB interface controller. + +properties: + compatible: + enum: + - usb-a-connector + - usb-b-connector + - usb-c-connector + + label: + description: Symbolic name for the connector. + + type: + description: Size of the connector, should be specified in case of + non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible + connectors. + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - mini + - micro + + self-powered: + description: Set this property if the USB device has its own power source. + type: boolean + + # The following are optional properties for "usb-b-connector". + id-gpios: + description: An input gpio for USB ID pin. + maxItems: 1 + + vbus-gpios: + description: An input gpio for USB VBus pin, used to detect presence of + VBUS 5V. + maxItems: 1 + + vbus-supply: + description: A phandle to the regulator for USB VBUS if needed when host + mode or dual role mode is supported. + Particularly, if use an output GPIO to control a VBUS regulator, should + model it as a regulator. See bindings/regulator/fixed-regulator.yaml + + # The following are optional properties for "usb-c-connector". + power-role: + description: Determines the power role that the Type C connector will + support. "dual" refers to Dual Role Port (DRP). + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - source + - sink + - dual + + try-power-role: + description: Preferred power role. + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - source + - sink + - dual + + data-role: + description: Data role if Type C connector supports USB data. "dual" refers + Dual Role Device (DRD). + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - host + - device + - dual + + # The following are optional properties for "usb-c-connector" with power + # delivery support. + source-pdos: + description: An array of u32 with each entry providing supported power + source data object(PDO), the detailed bit definitions of PDO can be found + in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2 + Source_Capabilities Message, the order of each entry(PDO) should follow + the PD spec chapter 6.4.1. Required for power source and power dual role. + User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() + defined in dt-bindings/usb/pd.h. + minItems: 1 + maxItems: 7 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + + sink-pdos: + description: An array of u32 with each entry providing supported power sink + data object(PDO), the detailed bit definitions of PDO can be found in + "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3 + Sink Capabilities Message, the order of each entry(PDO) should follow the + PD spec chapter 6.4.1. Required for power sink and power dual role. User + can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined + in dt-bindings/usb/pd.h. + minItems: 1 + maxItems: 7 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + + op-sink-microwatt: + description: Sink required operating power in microwatt, if source can't + offer the power, Capability Mismatch is set. Required for power sink and + power dual role. + + ports: + description: OF graph bindings (specified in bindings/graph.txt) that model + any data bus to the connector unless the bus is between parent node and + the connector. Since a single connector can have multiple data buses every + bus has an assigned OF graph port number as described below. + type: object + properties: + port@0: + type: object + description: High Speed (HS), present in all connectors. + + port@1: + type: object + description: Super Speed (SS), present in SS capable connectors. + + port@2: + type: object + description: Sideband Use (SBU), present in USB-C. This describes the + alternate mode connection of which SBU is a part. + + required: + - port@0 + +required: + - compatible + +examples: + # Micro-USB connector with HS lines routed via controller (MUIC). + - |+ + muic-max77843 { + usb_con1: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; + + # USB-C connector attached to CC controller (s2mm005), HS lines routed + # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort. + # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY. + - |+ + ccic: s2mm005 { + usb_con2: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_hs: endpoint { + remote-endpoint = <&max77865_usbc_hs>; + }; + }; + port@1 { + reg = <1>; + usb_con_ss: endpoint { + remote-endpoint = <&usbdrd_phy_ss>; + }; + }; + port@2 { + reg = <2>; + usb_con_sbu: endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + + # USB-C connector attached to a typec port controller(ptn5110), which has + # power delivery support and enables drp. + - |+ + #include + typec: ptn5110 { + usb_con3: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt index ba2e32d500c0..60e4654297af 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt +++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt @@ -9,7 +9,7 @@ Required sub-node: - connector : The "usb-c-connector" attached to the FUSB302 IC. The bindings of the connector node are specified in: - Documentation/devicetree/bindings/connector/usb-connector.txt + Documentation/devicetree/bindings/connector/usb-connector.yaml Example: diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt index e6790d2a4da9..474e74c06522 100644 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -34,7 +34,7 @@ Optional properties: - usb-role-switch: boolean, indicates that the device is capable of assigning the USB data role (USB host or USB device) for a given USB connector, such as Type-C, Type-B(micro). - see connector/usb-connector.txt. + see connector/usb-connector.yaml. This is an attribute to a USB controller such as: diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index e0ae6096f7ac..a82ca438aec1 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -34,7 +34,7 @@ Optional properties: dual-role mode. it's considered valid for compatibility reasons, not allowed for new bindings, and put into a usb-connector node. - see connector/usb-connector.txt. + see connector/usb-connector.yaml. - pinctrl-names : a pinctrl state named "default" is optional, and need be defined if auto drd switch is enabled, that means the property dr_mode is set as "otg", and meanwhile the property "mediatek,enable-manual-drd" diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt index 2b8a87c90d9e..5eedb0296562 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,musb.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt @@ -23,7 +23,7 @@ Optional properties: MTCMOS Required child nodes: - usb connector node as defined in bindings/connector/usb-connector.txt + usb connector node as defined in bindings/connector/usb-connector.yaml Optional properties: - id-gpios : input GPIO for USB ID pin. - vbus-gpios : input GPIO for USB VBUS pin. diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt index e3fc57e605ed..6f8115db2ea9 100644 --- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt @@ -9,7 +9,7 @@ Required properties: Required sub-node: - connector: The "usb-c-connector" attached to the tcpci chip, the bindings of connector node are specified in - Documentation/devicetree/bindings/connector/usb-connector.txt + Documentation/devicetree/bindings/connector/usb-connector.yaml Example : rt1711h@4e { diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt index 25780e945b15..2bd21b22ce95 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt @@ -9,7 +9,7 @@ Required sub-node: - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The bindings of the connector node are specified in: - Documentation/devicetree/bindings/connector/usb-connector.txt + Documentation/devicetree/bindings/connector/usb-connector.yaml Example: hd3ss3220@47 { diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt index 0dd1469e7318..2082522b1c32 100644 --- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt +++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt @@ -13,7 +13,7 @@ Required properties: Required sub-node: - connector: The "usb-c-connector" attached to the tcpci chip, the bindings of connector node are specified in - Documentation/devicetree/bindings/connector/usb-connector.txt + Documentation/devicetree/bindings/connector/usb-connector.yaml Example: diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt index 3d05ae56cb0d..ec80641208a5 100644 --- a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt +++ b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt @@ -8,11 +8,11 @@ Required properties: - compatible : should include "gpio-usb-b-connector" and "usb-b-connector". - id-gpios, vbus-gpios : input gpios, either one of them must be present, and both can be present as well. - see connector/usb-connector.txt + see connector/usb-connector.yaml Optional properties: - vbus-supply : can be present if needed when supports dual role mode. - see connector/usb-connector.txt + see connector/usb-connector.yaml - Sub-nodes: - port : can be present. -- cgit v1.2.3 From 175a7427bb72050f2cc12664d62c8ed0f2b40a23 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 6 Mar 2020 10:00:45 +0100 Subject: dt-bindings: serial: Convert generic bindings to json-schema Convert the generic serial interface Device Tree binding documentation to json-schema. Signed-off-by: Geert Uytterhoeven Signed-off-by: Rob Herring --- .../devicetree/bindings/serial/fsl-imx-uart.txt | 2 +- .../bindings/serial/renesas,sci-serial.txt | 4 +- .../devicetree/bindings/serial/serial.txt | 56 ----------------- .../devicetree/bindings/serial/serial.yaml | 71 ++++++++++++++++++++++ 4 files changed, 74 insertions(+), 59 deletions(-) delete mode 100644 Documentation/devicetree/bindings/serial/serial.txt create mode 100644 Documentation/devicetree/bindings/serial/serial.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index 35957cbf1571..556ad11c632f 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -15,7 +15,7 @@ Optional properties: the transceiver is actually CTS_B, not RTS_B. CTS_B is always output, and RTS_B is input, regardless of dte-mode. -Please check Documentation/devicetree/bindings/serial/serial.txt +Please check Documentation/devicetree/bindings/serial/serial.yaml for the complete list of generic properties. Note: Each uart controller should have an alias correctly numbered diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index a5edf4b70c7a..5816e7d739f6 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -128,9 +128,9 @@ Optional properties: transmission, and one for reception. - dma-names: Must contain a list of two DMA names, "tx" and "rx". - {cts,dsr,dcd,rng,rts,dtr}-gpios: Specify GPIOs for modem lines, cfr. the - generic serial DT bindings in serial.txt. + generic serial DT bindings in serial.yaml. - uart-has-rtscts: Indicates dedicated lines for RTS/CTS hardware flow - control, cfr. the generic serial DT bindings in serial.txt. + control, cfr. the generic serial DT bindings in serial.yaml. Example: aliases { diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt deleted file mode 100644 index 863c2893759e..000000000000 --- a/Documentation/devicetree/bindings/serial/serial.txt +++ /dev/null @@ -1,56 +0,0 @@ -Generic Serial DT Bindings - -This document lists a set of generic properties for describing UARTs in a -device tree. Whether these properties apply to a particular device depends on -the DT bindings for the actual device. - -Optional properties: - - cts-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be - used as the UART's CTS line. - - dcd-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be - used as the UART's DCD line. - - dsr-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be - used as the UART's DSR line. - - dtr-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be - used as the UART's DTR line. - - rng-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be - used as the UART's RNG line. - - rts-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be - used as the UART's RTS line. - - - uart-has-rtscts: The presence of this property indicates that the - UART has dedicated lines for RTS/CTS hardware flow control, and that - they are available for use (wired and enabled by pinmux configuration). - This depends on both the UART hardware and the board wiring. - Note that this property is mutually-exclusive with "cts-gpios" and - "rts-gpios" above, unless support is provided to switch between modes - dynamically. - - -Examples: - - uart1: serial@48022000 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; - ti,hwmods = "uart2"; - clock-frequency = <48000000>; - reg = <0x48022000 0x2000>; - interrupts = <73>; - dmas = <&edma 28 0>, <&edma 29 0>; - dma-names = "tx", "rx"; - dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; - dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; - rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; - cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - }; - - scifa4: serial@e6c80000 { - compatible = "renesas,scifa-sh73a0", "renesas,scifa"; - reg = <0xe6c80000 0x100>; - interrupts = ; - clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>; - clock-names = "fck"; - power-domains = <&pd_a3sp>; - uart-has-rtscts; - }; diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml new file mode 100644 index 000000000000..ca2ae755b560 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/serial.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Serial Interface Generic DT Bindings + +maintainers: + - Greg Kroah-Hartman + +description: + This document lists a set of generic properties for describing UARTs in a + device tree. Whether these properties apply to a particular device depends + on the DT bindings for the actual device. + +properties: + $nodename: + pattern: "^serial(@.*)?$" + + cts-gpios: + maxItems: 1 + description: + Must contain a GPIO specifier, referring to the GPIO pin to be used as + the UART's CTS line. + + dcd-gpios: + maxItems: 1 + description: + Must contain a GPIO specifier, referring to the GPIO pin to be used as + the UART's DCD line. + + dsr-gpios: + maxItems: 1 + description: + Must contain a GPIO specifier, referring to the GPIO pin to be used as + the UART's DSR line. + + dtr-gpios: + maxItems: 1 + description: + Must contain a GPIO specifier, referring to the GPIO pin to be used as + the UART's DTR line. + + rng-gpios: + maxItems: 1 + description: + Must contain a GPIO specifier, referring to the GPIO pin to be used as + the UART's RNG line. + + rts-gpios: + maxItems: 1 + description: + Must contain a GPIO specifier, referring to the GPIO pin to be used as + the UART's RTS line. + + uart-has-rtscts: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the UART has dedicated lines + for RTS/CTS hardware flow control, and that they are available for use + (wired and enabled by pinmux configuration). This depends on both the + UART hardware and the board wiring. + +if: + required: + - uart-has-rtscts +then: + properties: + cts-gpios: false + rts-gpios: false -- cgit v1.2.3 From 32ced09d79034a7e0e9139c007dcdabd9dd9f00c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 6 Mar 2020 10:00:46 +0100 Subject: dt-bindings: serial: Convert slave-device bindings to json-schema Convert the serial slave-device Device Tree binding documentation to json-schema, and incorporate it into the generic serial bindings. Signed-off-by: Geert Uytterhoeven Reviewed-by: Matthias Brugger Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/gnss/gnss.txt | 2 +- .../devicetree/bindings/net/broadcom-bluetooth.txt | 2 +- .../devicetree/bindings/net/mediatek-bluetooth.txt | 2 +- .../devicetree/bindings/net/qca,qca7000.txt | 2 +- .../devicetree/bindings/net/ti-bluetooth.txt | 3 +- .../devicetree/bindings/serial/serial.yaml | 56 ++++++++++++++++++++++ .../devicetree/bindings/serial/slave-device.txt | 45 ----------------- MAINTAINERS | 2 +- 8 files changed, 62 insertions(+), 52 deletions(-) delete mode 100644 Documentation/devicetree/bindings/serial/slave-device.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt index f547bd4549fe..d6dc9c0d8249 100644 --- a/Documentation/devicetree/bindings/gnss/gnss.txt +++ b/Documentation/devicetree/bindings/gnss/gnss.txt @@ -8,7 +8,7 @@ bus (e.g. UART, I2C or SPI). Please refer to the following documents for generic properties: - Documentation/devicetree/bindings/serial/slave-device.txt + Documentation/devicetree/bindings/serial/serial.yaml Documentation/devicetree/bindings/spi/spi-bus.txt Required properties: diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt index dd258674633c..a7d57ba5f2ac 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt @@ -20,7 +20,7 @@ Required properties: Optional properties: - - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt + - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - shutdown-gpios: GPIO specifier, used to enable the BT module - device-wakeup-gpios: GPIO specifier, used to wakeup the controller - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor. diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 112011c51d5e..219bcbd0d344 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -42,7 +42,7 @@ child node of the serial node with UART. Please refer to the following documents for generic properties: - Documentation/devicetree/bindings/serial/slave-device.txt + Documentation/devicetree/bindings/serial/serial.yaml Required properties: diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt index 21c36e524993..8f5ae0b84eec 100644 --- a/Documentation/devicetree/bindings/net/qca,qca7000.txt +++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt @@ -68,7 +68,7 @@ Required properties: Optional properties: - local-mac-address : see ./ethernet.txt - current-speed : current baud rate of QCA7000 which defaults to 115200 - if absent, see also ../serial/slave-device.txt + if absent, see also ../serial/serial.yaml UART Example: diff --git a/Documentation/devicetree/bindings/net/ti-bluetooth.txt b/Documentation/devicetree/bindings/net/ti-bluetooth.txt index 6d03ff8c7068..f48c17b38f58 100644 --- a/Documentation/devicetree/bindings/net/ti-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/ti-bluetooth.txt @@ -15,8 +15,7 @@ standard BT HCI protocol with additional channels for the other functions. TI WiLink devices also have a separate WiFi interface as described in wireless/ti,wlcore.txt. -This bindings follows the UART slave device binding in -../serial/slave-device.txt. +This bindings follows the UART slave device binding in ../serial/serial.yaml. Required properties: - compatible: should be one of the following: diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index ca2ae755b560..dd97ecd1a7fe 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -7,6 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Serial Interface Generic DT Bindings maintainers: + - Rob Herring - Greg Kroah-Hartman description: @@ -69,3 +70,58 @@ then: properties: cts-gpios: false rts-gpios: false + +patternProperties: + ".*": + if: + type: object + then: + description: + Serial attached devices shall be a child node of the host UART device + the slave device is attached to. It is expected that the attached + device is the only child node of the UART device. The slave device node + name shall reflect the generic type of device for the node. + + properties: + compatible: + description: + Compatible of the device connected to the serial port. + + max-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The maximum baud rate the device operates at. + This should only be present if the maximum is less than the slave + device can support. For example, a particular board has some + signal quality issue or the host processor can't support higher + baud rates. + + current-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The current baud rate the device operates at. + This should only be present in case a driver has no chance to know + the baud rate of the slave device. + Examples: + * device supports auto-baud + * the rate is setup by a bootloader and there is no way to reset + the device + * device baud rate is configured by its firmware but there is no + way to request the actual settings + + required: + - compatible + +examples: + - | + serial@1234 { + compatible = "ns16550a"; + reg = <0x1234 0x20>; + interrupts = <1>; + + bluetooth { + compatible = "brcm,bcm43341-bt"; + interrupt-parent = <&gpio>; + interrupts = <10>; + }; + }; diff --git a/Documentation/devicetree/bindings/serial/slave-device.txt b/Documentation/devicetree/bindings/serial/slave-device.txt deleted file mode 100644 index 40110e019620..000000000000 --- a/Documentation/devicetree/bindings/serial/slave-device.txt +++ /dev/null @@ -1,45 +0,0 @@ -Serial Slave Device DT binding - -This documents the binding structure and common properties for serial -attached devices. Common examples include Bluetooth, WiFi, NFC and GPS -devices. - -Serial attached devices shall be a child node of the host UART device the -slave device is attached to. It is expected that the attached device is -the only child node of the UART device. The slave device node name shall -reflect the generic type of device for the node. - -Required Properties: - -- compatible : A string reflecting the vendor and specific device the node - represents. - -Optional Properties: - -- max-speed : The maximum baud rate the device operates at. This should - only be present if the maximum is less than the slave device - can support. For example, a particular board has some signal - quality issue or the host processor can't support higher - baud rates. -- current-speed : The current baud rate the device operates at. This should - only be present in case a driver has no chance to know - the baud rate of the slave device. - Examples: - * device supports auto-baud - * the rate is setup by a bootloader and there is no - way to reset the device - * device baud rate is configured by its firmware but - there is no way to request the actual settings - -Example: - -serial@1234 { - compatible = "ns16550a"; - interrupts = <1>; - - bluetooth { - compatible = "brcm,bcm43341-bt"; - interrupt-parent = <&gpio>; - interrupts = <10>; - }; -}; diff --git a/MAINTAINERS b/MAINTAINERS index b4cb364cd019..16760fc4f64b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15001,7 +15001,7 @@ SERIAL DEVICE BUS M: Rob Herring L: linux-serial@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/serial/slave-device.txt +F: Documentation/devicetree/bindings/serial/serial.yaml F: drivers/tty/serdev/ F: include/linux/serdev.h -- cgit v1.2.3 From 092451b7f24087213909731397159cb416bcf8c1 Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Mon, 9 Mar 2020 21:35:56 +0100 Subject: dt-bindings: Add vendor prefix for SG Micro Corp "SG Micro Corp (SGMICRO) specializes in high performance, high quality analog IC design, marketing and sales." (http://www.sg-micro.com/) Signed-off-by: Luca Weiss Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index d035e38d6ba3..28f4a1bd0960 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -869,6 +869,8 @@ patternProperties: description: Small Form Factor Committee "^sgd,.*": description: Solomon Goldentek Display Corporation + "^sgmicro,.*": + description: SG Micro Corp "^sgx,.*": description: SGX Sensortech "^sharp,.*": -- cgit v1.2.3 From 9a239621d4e10f7d5bc12ed106562fad2e49bcb3 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Mon, 9 Mar 2020 21:38:15 +0100 Subject: dt-bindings: Add vendor prefix for Dell Inc. Dell makes computers and perhaps other stuff. Their web site is http://www.dell.com/. Signed-off-by: Lubomir Rintel Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 28f4a1bd0960..5bfdac82d8c1 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -233,6 +233,8 @@ patternProperties: description: DataImage, Inc. "^davicom,.*": description: DAVICOM Semiconductor, Inc. + "^dell,.*": + description: Dell Inc. "^delta,.*": description: Delta Electronics, Inc. "^denx,.*": -- cgit v1.2.3 From 9c4d60a36e3ac7953b313631911a9f0367cd0872 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Mon, 9 Mar 2020 21:38:16 +0100 Subject: dt-bindings: Add vendor prefix for ENE ENE Technology makes embedded controllers and perhaps other stuff. Their web site is http://www.ene.com.tw/. Signed-off-by: Lubomir Rintel Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 5bfdac82d8c1..03b780626435 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -301,6 +301,8 @@ patternProperties: description: emtrion GmbH "^endless,.*": description: Endless Mobile, Inc. + "^ene,.*": + description: ENE Technology, Inc. "^energymicro,.*": description: Silicon Laboratories (formerly Energy Micro AS) "^engicam,.*": -- cgit v1.2.3 From 952c2ab61db2ef16a44ef56d55dd14644413ccf7 Mon Sep 17 00:00:00 2001 From: Giulio Benetti Date: Tue, 10 Mar 2020 00:57:22 +0100 Subject: dt-bindings: clk: fix example for single-output provider As described above single-output clock provider should have 0 cells number, so let's fix it by using 0 as cells number. Signed-off-by: Giulio Benetti Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/clock/clock-bindings.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index b646bbcf7f92..8a55fdcf96ee 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -94,7 +94,7 @@ clock is connected to output 0 of the &ref. /* external oscillator */ osc: oscillator { compatible = "fixed-clock"; - #clock-cells = <1>; + #clock-cells = <0>; clock-frequency = <32678>; clock-output-names = "osc"; }; -- cgit v1.2.3 From 2dccf69454997cc176bf7d6d1d3dbfc56416ee48 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 4 Mar 2020 10:42:20 +0100 Subject: dt-bindings: mfd: Convert stpmic1 bindings to json-schema Convert stpmic1 bindings to json-schema. Signed-off-by: Benjamin Gaignard Signed-off-by: Rob Herring --- .../devicetree/bindings/input/st,stpmic1-onkey.txt | 28 -- .../devicetree/bindings/mfd/st,stpmic1.txt | 61 ---- .../devicetree/bindings/mfd/st,stpmic1.yaml | 339 +++++++++++++++++++++ .../bindings/regulator/st,stpmic1-regulator.txt | 64 ---- .../bindings/watchdog/st,stpmic1-wdt.txt | 11 - 5 files changed, 339 insertions(+), 164 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt delete mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.txt create mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt delete mode 100644 Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt deleted file mode 100644 index eb8e83736c02..000000000000 --- a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt +++ /dev/null @@ -1,28 +0,0 @@ -STMicroelectronics STPMIC1 Onkey - -Required properties: - -- compatible = "st,stpmic1-onkey"; -- interrupts: interrupt line to use -- interrupt-names = "onkey-falling", "onkey-rising" - onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic - onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic - -Optional properties: - -- st,onkey-clear-cc-flag: onkey is able power on after an - over-current shutdown event. -- st,onkey-pu-inactive: onkey pull up is not active -- power-off-time-sec: Duration in seconds which the key should be kept - pressed for device to power off automatically (from 1 to 16 seconds). - see See Documentation/devicetree/bindings/input/input.yaml - -Example: - -onkey { - compatible = "st,stpmic1-onkey"; - interrupt-parent = <&pmic>; - interrupts = ,; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; -}; diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt deleted file mode 100644 index afd45c089585..000000000000 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt +++ /dev/null @@ -1,61 +0,0 @@ -* STMicroelectronics STPMIC1 Power Management IC - -Required properties: -- compatible: : "st,stpmic1" -- reg: : The I2C slave address for the STPMIC1 chip. -- interrupts: : The interrupt line the device is connected to. -- #interrupt-cells: : Should be 1. -- interrupt-controller: : Marks the device node as an interrupt controller. - Interrupt numbers are defined at - dt-bindings/mfd/st,stpmic1.h. - -STPMIC1 consists in a varied group of sub-devices. -Each sub-device binding is be described in own documentation file. - -Device Description ------- ------------ -st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt -st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt -st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt - -Example: - -#include - -pmic: pmic@33 { - compatible = "st,stpmic1"; - reg = <0x33>; - interrupt-parent = <&gpioa>; - interrupts = <0 2>; - - interrupt-controller; - #interrupt-cells = <2>; - - onkey { - compatible = "st,stpmic1-onkey"; - interrupts = ,; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; - }; - - watchdog { - compatible = "st,stpmic1-wdt"; - }; - - regulators { - compatible = "st,stpmic1-regulators"; - - vdd_core: buck1 { - regulator-name = "vdd_core"; - regulator-boot-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1200000>; - }; - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-pull-down; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml new file mode 100644 index 000000000000..d9ad9260e348 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -0,0 +1,339 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics STPMIC1 Power Management IC bindings + +description: STMicroelectronics STPMIC1 Power Management IC + +maintainers: + - pascal Paillet + +properties: + compatible: + const: st,stpmic1 + + reg: + const: 0x33 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + onkey: + type: object + + allOf: + - $ref: ../input/input.yaml + + properties: + compatible: + const: st,stpmic1-onkey + + interrupts: + items: + - description: onkey-falling, happens when onkey is pressed. IT_PONKEY_F of pmic + - description: onkey-rising, happens when onkey is released. IT_PONKEY_R of pmic + + interrupt-names: + items: + - const: onkey-falling + - const: onkey-rising + + st,onkey-clear-cc-flag: + description: onkey is able power on after an over-current shutdown event. + $ref: /schemas/types.yaml#/definitions/flag + + st,onkey-pu-inactive: + description: onkey pull up is not active + $ref: /schemas/types.yaml#/definitions/flag + + power-off-time-sec: + minimum: 1 + maximum: 16 + + required: + - compatible + - interrupts + - interrupt-names + + additionalProperties: false + + watchdog: + type: object + + allOf: + - $ref: ../watchdog/watchdog.yaml + + properties: + compatible: + const: st,stpmic1-wdt + + timeout-sec: true + + required: + - compatible + + additionalProperties: false + + regulators: + type: object + + description: | + Available Regulators in STPMIC1 device are: + - buck1 for Buck BUCK1 + - buck2 for Buck BUCK2 + - buck3 for Buck BUCK3 + - buck4 for Buck BUCK4 + - ldo1 for LDO LDO1 + - ldo2 for LDO LDO2 + - ldo3 for LDO LDO3 + - ldo4 for LDO LDO4 + - ldo5 for LDO LDO5 + - ldo6 for LDO LDO6 + - vref_ddr for LDO Vref DDR + - boost for Buck BOOST + - pwr_sw1 for VBUS_OTG switch + - pwr_sw2 for SW_OUT switch + Switches are fixed voltage regulators with only enable/disable capability. + + properties: + compatible: + const: st,stpmic1-regulators + + ldo3: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-allow-bypass: true + regulator-over-current-protection: true + + additionalProperties: false + + ldo4: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-over-current-protection: true + + additionalProperties: false + + vref_ddr: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + + additionalProperties: false + + boost: + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-over-current-protection: true + + additionalProperties: false + + patternProperties: + "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": + description: STPMIC1 voltage regulators supplies + + "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": + allOf: + - $ref: ../regulator/regulator.yaml + + "^ldo[1-2,5-6]$": + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-over-current-protection: true + regulator-enable-ramp-delay: true + + additionalProperties: false + + "^buck[1-4]$": + type: object + + properties: + interrupts: + maxItems: 1 + + st,mask-reset: + description: mask reset for this regulator, + the regulator configuration is maintained during pmic reset. + $ref: /schemas/types.yaml#/definitions/flag + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-initial-mode: true + regulator-pull-down: true + regulator-over-current-protection: true + regulator-enable-ramp-delay: true + + additionalProperties: false + + "^pwr_sw[1-2]$": + type: object + + properties: + interrupts: + maxItems: 1 + + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-over-current-protection: true + regulator-active-discharge: true + + additionalProperties: false + + required: + - compatible + + additionalProperties: false + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - "#interrupt-cells" + - interrupt-controller + +examples: + - | + #include + #include + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupt-parent = <&gpioa>; + interrupts = <0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = ,; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo6-supply = <&v3v3>; + + buck1 { + regulator-name = "vdd_core"; + interrupts = ; + st,mask-reset; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1200000>; + }; + + buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-pull-down; + }; + + buck4 { + regulator-name = "v3v3"; + interrupts = ; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-over-current-protection; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt deleted file mode 100644 index 6189df71ea98..000000000000 --- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt +++ /dev/null @@ -1,64 +0,0 @@ -STMicroelectronics STPMIC1 Voltage regulators - -Regulator Nodes are optional depending on needs. - -Available Regulators in STPMIC1 device are: - - buck1 for Buck BUCK1 - - buck2 for Buck BUCK2 - - buck3 for Buck BUCK3 - - buck4 for Buck BUCK4 - - ldo1 for LDO LDO1 - - ldo2 for LDO LDO2 - - ldo3 for LDO LDO3 - - ldo4 for LDO LDO4 - - ldo5 for LDO LDO5 - - ldo6 for LDO LDO6 - - vref_ddr for LDO Vref DDR - - boost for Buck BOOST - - pwr_sw1 for VBUS_OTG switch - - pwr_sw2 for SW_OUT switch - -Switches are fixed voltage regulators with only enable/disable capability. - -Optional properties: -- st,mask-reset: mask reset for this regulator: the regulator configuration - is maintained during pmic reset. -- regulator-over-current-protection: - if set, all regulators are switched off in case of over-current detection - on this regulator, - if not set, the driver only sends an over-current event. -- interrupts: index of current limit detection interrupt -- -supply: phandle to the parent supply/regulator node - each regulator supply can be described except vref_ddr. -- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2. - -Example: -regulators { - compatible = "st,stpmic1-regulators"; - - ldo6-supply = <&v3v3>; - - vdd_core: buck1 { - regulator-name = "vdd_core"; - interrupts = ; - st,mask-reset; - regulator-pull-down; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1200000>; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - interrupts = ; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - v1v8: ldo6 { - regulator-name = "v1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-over-current-protection; - }; -}; diff --git a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt deleted file mode 100644 index 7cc1407f15cb..000000000000 --- a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt +++ /dev/null @@ -1,11 +0,0 @@ -STMicroelectronics STPMIC1 Watchdog - -Required properties: - -- compatible : should be "st,stpmic1-wdt" - -Example: - -watchdog { - compatible = "st,stpmic1-wdt"; -}; -- cgit v1.2.3 From 04bd645a0f24f6870f81e9abbc0b865c22b86c67 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 25 Mar 2020 16:05:38 -0600 Subject: dt-bindings: iio/accel: Drop duplicate adi,adxl345/6 from trivial-devices.yaml The 'adi,adxl345' definition is a duplicate as there's a full binding in: Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml The trivial-devices binding doesn't capture that 'adi,adxl346' has a fallback compatible 'adi,adxl345', so let's add it to adi,adxl345.yaml. Signed-off-by: Rob Herring Acked-by: Alexandru Ardelean Cc: Peter Meerwald-Stadler Cc: Michael Hennerich Cc: Hartmut Knaack Cc: linux-iio@vger.kernel.org Cc: Lars-Peter Clausen Cc: Jonathan Cameron --- Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml | 10 +++++++--- Documentation/devicetree/bindings/trivial-devices.yaml | 4 ---- 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index c602b6fe1c0c..d124eba1ce54 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -17,9 +17,13 @@ description: | properties: compatible: - enum: - - adi,adxl345 - - adi,adxl375 + oneOf: + - items: + - const: adi,adxl346 + - const: adi,adxl345 + - enum: + - adi,adxl345 + - adi,adxl375 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 978de7d37c66..51d1f6e43c02 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -42,10 +42,6 @@ properties: - adi,adt7476 # +/-1C TDM Extended Temp Range I.C - adi,adt7490 - # Three-Axis Digital Accelerometer - - adi,adxl345 - # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) - - adi,adxl346 # AMS iAQ-Core VOC Sensor - ams,iaq-core # i2c serial eeprom (24cxx) -- cgit v1.2.3 From b6b76af4661bae4d3ab6a5c93e85f739d94865b6 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 25 Mar 2020 16:05:39 -0600 Subject: dt-bindings: sram: qcom: Clean-up 'ranges' and child node names The regex for child nodes doesn't match the example. This wasn't flagged with 'additionalProperties: false' missing. The child node schema was also incorrect with 'ranges' property as it applies to child nodes and should be moved up to the parent node. Fixes: 957fd69d396b ("dt-bindings: soc: qcom: add On Chip MEMory (OCMEM) bindings") Signed-off-by: Rob Herring Reviewed-by: Brian Masney Cc: Bjorn Andersson Cc: Brian Masney Cc: linux-arm-msm@vger.kernel.org --- Documentation/devicetree/bindings/sram/qcom,ocmem.yaml | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml index 222990f9923c..469cec133647 100644 --- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml +++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml @@ -43,6 +43,9 @@ properties: '#size-cells': const: 1 + ranges: + maxItems: 1 + required: - compatible - reg @@ -51,9 +54,10 @@ required: - clock-names - '#address-cells' - '#size-cells' + - ranges patternProperties: - "^.+-sram$": + "-sram@[0-9a-f]+$": type: object description: A region of reserved memory. @@ -61,12 +65,8 @@ patternProperties: reg: maxItems: 1 - ranges: - maxItems: 1 - required: - reg - - ranges examples: - | @@ -88,9 +88,9 @@ examples: #address-cells = <1>; #size-cells = <1>; + ranges = <0 0xfec00000 0x100000>; gmu-sram@0 { reg = <0x0 0x100000>; - ranges = <0 0 0xfec00000 0x100000>; }; }; -- cgit v1.2.3 From 0d9a302da00af02482846a04e881f2388a4537fc Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 25 Mar 2020 16:05:40 -0600 Subject: dt-bindings: Clean-up schema errors due to missing 'addtionalProperties: false' Numerous schemas are missing 'additionalProperties: false' statements which ensures a binding doesn't have any extra undocumented properties or child nodes. Fixing this reveals various missing properties, so let's fix all those occurrences. Signed-off-by: Rob Herring Reviewed-by: Neil Armstrong Acked-by: Alexandru Ardelean Acked-by: Jonathan Cameron #for-iio Acked-by: Stephen Boyd # clock Acked-by: Lee Jones Reviewed-by: Linus Walleij Cc: dri-devel@lists.freedesktop.org Cc: netdev@vger.kernel.org Cc: Guillaume La Roque Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Brown Cc: linux-iio@vger.kernel.org Cc: Lars-Peter Clausen Cc: linux-clk@vger.kernel.org Cc: Thomas Gleixner Cc: Kevin Hilman Cc: "David S. Miller" Cc: Hartmut Knaack Cc: Peter Meerwald-Stadler Cc: linux-amlogic@lists.infradead.org Cc: linux-pm@vger.kernel.org Cc: Masahiro Yamada Cc: Bartosz Golaszewski Cc: Liam Girdwood Cc: Mauro Carvalho Chehab Cc: linux-gpio@vger.kernel.org Cc: Daniel Lezcano Cc: Zhang Rui Cc: linux-media@vger.kernel.org Cc: Lee Jones --- .../devicetree/bindings/clock/fsl,plldig.yaml | 3 +++ .../bindings/gpio/socionext,uniphier-gpio.yaml | 2 ++ .../devicetree/bindings/gpu/arm,mali-bifrost.yaml | 6 +++--- .../devicetree/bindings/gpu/arm,mali-midgard.yaml | 3 +++ .../devicetree/bindings/iio/adc/adi,ad7192.yaml | 1 - .../devicetree/bindings/iio/pressure/bmp085.yaml | 3 +++ .../bindings/media/amlogic,meson-gx-ao-cec.yaml | 9 ++++++--- .../devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 3 +++ .../devicetree/bindings/net/ti,cpsw-switch.yaml | 23 ++++++++++++++-------- .../bindings/regulator/max77650-regulator.yaml | 2 +- .../bindings/thermal/amlogic,thermal.yaml | 2 ++ .../bindings/timer/arm,arch_timer_mmio.yaml | 2 ++ 12 files changed, 43 insertions(+), 16 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml index c8350030b374..d1c040228cf7 100644 --- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml @@ -21,6 +21,9 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 1 + '#clock-cells': const: 0 diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml index 580a39e09d39..c58ff9a94f45 100644 --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml @@ -41,6 +41,8 @@ properties: minimum: 0 maximum: 512 + gpio-ranges: true + gpio-ranges-group-names: $ref: /schemas/types.yaml#/definitions/string-array diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index e8b99adcb1bd..05fd9a404ff7 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -43,6 +43,9 @@ properties: operating-points-v2: true + resets: + maxItems: 2 + required: - compatible - reg @@ -57,9 +60,6 @@ allOf: contains: const: amlogic,meson-g12a-mali then: - properties: - resets: - minItems: 2 required: - resets diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 8d966f3ff3db..6819cde050df 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -75,6 +75,9 @@ properties: mali-supply: true + power-domains: + maxItems: 1 + resets: minItems: 1 maxItems: 2 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 84d25bd39488..d0913034b1d8 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -106,7 +106,6 @@ examples: spi-cpha; clocks = <&ad7192_mclk>; clock-names = "mclk"; - #interrupt-cells = <2>; interrupts = <25 0x2>; interrupt-parent = <&gpio>; dvdd-supply = <&dvdd>; diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml index 519137e5c170..5d4aec0e0d24 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -25,6 +25,9 @@ properties: - bosch,bmp280 - bosch,bme280 + reg: + maxItems: 1 + vddd-supply: description: digital voltage regulator (see regulator/regulator.txt) diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml index 41197578f19a..e8ce37fcbfec 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml @@ -24,6 +24,12 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + interrupts: maxItems: 1 @@ -47,7 +53,6 @@ allOf: - description: AO-CEC clock clock-names: - maxItems: 1 items: - const: core @@ -66,7 +71,6 @@ allOf: - description: AO-CEC clock generator source clock-names: - maxItems: 1 items: - const: oscin @@ -88,4 +92,3 @@ examples: clock-names = "core"; hdmi-phandle = <&hdmi_tx>; }; - diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml index 4fbb9e734284..38dc4f8b0ceb 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml @@ -41,6 +41,9 @@ properties: "#clock-cells": const: 0 + clock-output-names: + const: bd71828-32k-out + rohm,charger-sense-resistor-ohms: minimum: 10000000 maximum: 50000000 diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index ac8c76369a86..b9e9696da5be 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -37,6 +37,12 @@ properties: description: The physical base address and size of full the CPSW module IO range + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + ranges: true clocks: @@ -111,13 +117,6 @@ properties: - reg - phys - mdio: - type: object - allOf: - - $ref: "ti,davinci-mdio.yaml#" - description: - CPSW MDIO bus. - cpts: type: object description: @@ -148,6 +147,15 @@ properties: - clocks - clock-names +patternProperties: + "^mdio@": + type: object + allOf: + - $ref: "ti,davinci-mdio.yaml#" + description: + CPSW MDIO bus. + + required: - compatible - reg @@ -174,7 +182,6 @@ examples: #address-cells = <1>; #size-cells = <1>; syscon = <&scm_conf>; - inctrl-names = "default", "sleep"; interrupts = , , diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml index 7d724159f890..50690487edc8 100644 --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml @@ -24,7 +24,7 @@ properties: const: maxim,max77650-regulator patternProperties: - "^regulator@[0-3]$": + "^regulator-(ldo|sbb[0-2])$": $ref: "regulator.yaml#" required: diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml index f761681e4c0d..93fe7b10a82e 100644 --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml @@ -32,6 +32,8 @@ properties: description: phandle to the ao-secure syscon $ref: '/schemas/types.yaml#/definitions/phandle' + '#thermal-sensor-cells': + const: 0 required: - compatible diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index 102f319833d9..f7ef6646bade 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -32,6 +32,8 @@ properties: '#size-cells': const: 1 + ranges: true + clock-frequency: description: The frequency of the main counter, in Hz. Should be present only where necessary to work around broken firmware which does not configure -- cgit v1.2.3 From 7f464532b05dadc8f96acdda7093334c863e7a06 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 25 Mar 2020 16:05:41 -0600 Subject: dt-bindings: Add missing 'additionalProperties: false' Setting 'additionalProperties: false' is frequently omitted, but is important in order to check that there aren't extra undocumented properties in a binding. Ideally, we'd just add this automatically and make this the default, but there's some cases where it doesn't work. For example, if a common schema is referenced, then properties in the common schema aren't part of what's considered for 'additionalProperties'. Also, sometimes there are bus specific properties such as 'spi-max-frequency' that go into bus child nodes, but aren't defined in the child node's schema. So let's stick with the json-schema defined default and add 'additionalProperties: false' where needed. This will be a continual review comment and game of wack-a-mole. Signed-off-by: Rob Herring Reviewed-by: Neil Armstrong Acked-by: Mark Brown Acked-by: Jonathan Cameron Acked-by: Alexandru Ardelean Reviewed-by: Benjamin Gaignard Acked-by: Stephen Boyd # clock Acked-by: Lee Jones --- Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml | 2 ++ .../devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml | 2 ++ Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml | 2 ++ Documentation/devicetree/bindings/arm/renesas,prr.yaml | 2 ++ Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml | 2 ++ Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 2 ++ .../devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml | 2 ++ Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml | 2 ++ Documentation/devicetree/bindings/clock/fsl,plldig.yaml | 2 ++ Documentation/devicetree/bindings/clock/imx8mn-clock.yaml | 2 ++ Documentation/devicetree/bindings/clock/imx8mp-clock.yaml | 2 ++ Documentation/devicetree/bindings/clock/milbeaut-clock.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,gcc.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,mmcc.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml | 2 ++ Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml | 2 ++ Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml | 2 ++ Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml | 2 ++ Documentation/devicetree/bindings/dsp/fsl,dsp.yaml | 2 ++ Documentation/devicetree/bindings/eeprom/at24.yaml | 2 ++ .../bindings/firmware/intel,ixp4xx-network-processing-engine.yaml | 3 +++ Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 ++ Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml | 2 ++ Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml | 2 ++ Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml | 2 ++ Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml | 2 ++ Documentation/devicetree/bindings/gpu/samsung-rotator.yaml | 2 ++ Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml | 2 ++ Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml | 2 ++ Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml | 2 ++ Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml | 2 ++ Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml | 2 ++ Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 ++ Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml | 2 ++ Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 2 ++ Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 2 ++ Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 ++ Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml | 2 ++ Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml | 2 ++ Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml | 2 ++ Documentation/devicetree/bindings/iio/light/adux1020.yaml | 2 ++ Documentation/devicetree/bindings/iio/light/bh1750.yaml | 2 ++ Documentation/devicetree/bindings/iio/light/isl29018.yaml | 2 ++ Documentation/devicetree/bindings/iio/light/noa1305.yaml | 2 ++ Documentation/devicetree/bindings/iio/light/stk33xx.yaml | 2 ++ Documentation/devicetree/bindings/iio/light/tsl2583.yaml | 2 ++ Documentation/devicetree/bindings/iio/light/tsl2772.yaml | 2 ++ Documentation/devicetree/bindings/iio/light/veml6030.yaml | 2 ++ Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 ++ Documentation/devicetree/bindings/iio/pressure/bmp085.yaml | 2 ++ Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml | 2 ++ Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml | 2 ++ Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml | 2 ++ Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 2 ++ Documentation/devicetree/bindings/input/max77650-onkey.yaml | 3 +++ .../bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml | 2 ++ Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml | 2 ++ Documentation/devicetree/bindings/leds/leds-max77650.yaml | 3 +++ Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml | 3 +++ Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml | 2 ++ Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml | 2 ++ Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml | 2 ++ Documentation/devicetree/bindings/media/renesas,ceu.yaml | 2 ++ Documentation/devicetree/bindings/mfd/max77650.yaml | 2 ++ Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 2 ++ .../devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml | 2 ++ Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml | 2 ++ .../devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml | 2 ++ .../devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml | 2 ++ Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml | 2 ++ Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml | 2 ++ Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 2 ++ Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 2 ++ Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 2 ++ Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 2 ++ Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml | 2 ++ Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 2 ++ Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml | 2 ++ Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml | 2 ++ Documentation/devicetree/bindings/power/supply/max77650-charger.yaml | 3 +++ Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml | 2 ++ Documentation/devicetree/bindings/regulator/max77650-regulator.yaml | 3 +++ Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml | 2 ++ .../devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml | 2 ++ Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml | 2 ++ Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml | 2 ++ Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml | 2 ++ Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml | 2 ++ Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml | 2 ++ Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml | 2 ++ Documentation/devicetree/bindings/sound/adi,adau7118.yaml | 2 ++ Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml | 2 ++ Documentation/devicetree/bindings/sound/renesas,fsi.yaml | 2 ++ Documentation/devicetree/bindings/sound/samsung,odroid.yaml | 2 ++ Documentation/devicetree/bindings/sound/samsung-i2s.yaml | 2 ++ Documentation/devicetree/bindings/sram/qcom,ocmem.yaml | 2 ++ Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml | 2 ++ Documentation/devicetree/bindings/timer/arm,arch_timer.yaml | 2 ++ Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml | 2 ++ Documentation/devicetree/bindings/timer/arm,global_timer.yaml | 2 ++ Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml | 2 ++ Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml | 2 ++ Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++ 116 files changed, 238 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml index e4131fa42b26..572381306681 100644 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml @@ -21,6 +21,8 @@ properties: required: - compatible +additionalProperties: false + examples: - | clkmgr@ffd04000 { diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml index 853d7d2b56f5..66213bd95e6e 100644 --- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml @@ -43,6 +43,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | ao-secure@140 { diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml index 79902f470e4b..c3a8604dfa80 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml @@ -43,6 +43,8 @@ required: - reg-names - interrupts +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/arm/renesas,prr.yaml index 7f8d17f33983..dd087643a9f8 100644 --- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml +++ b/Documentation/devicetree/bindings/arm/renesas,prr.yaml @@ -27,6 +27,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | prr: chipid@ff000044 { diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml index afcd70803c12..0425d333b50d 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml @@ -30,6 +30,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | chipid@10000000 { diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml index 73b56fc5bf58..c9651892710e 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml @@ -89,6 +89,8 @@ required: - clock-names - clocks +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml index 51d23b6f8a94..3d9abad3c749 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml @@ -23,6 +23,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | firmware@203f000 { diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml index 0dedf94c8578..baff80197d5a 100644 --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml @@ -29,6 +29,8 @@ required: - reg - clocks +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml index d1c040228cf7..a203d5d498db 100644 --- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml @@ -44,6 +44,8 @@ required: - clocks - '#clock-cells' +additionalProperties: false + examples: # Display PIXEL Clock node: - | diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml index cd0b8a341321..03386b0861a2 100644 --- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml @@ -52,6 +52,8 @@ required: - clock-names - '#clock-cells' +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml index 89aee63c9019..4351a1dbb4f7 100644 --- a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml @@ -52,6 +52,8 @@ required: - clock-names - '#clock-cells' +additionalProperties: false + examples: # Clock Control Module node: - | diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml index f0b804a7f096..0e8b07710451 100644 --- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml @@ -35,6 +35,8 @@ required: - clocks - '#clock-cells' +additionalProperties: false + examples: # Clock controller node: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml index 3647007f82ca..eacccc88bbf6 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml @@ -68,6 +68,8 @@ required: - nvmem-cell-names - '#thermal-sensor-cells' +additionalProperties: false + examples: - | clock-controller@900000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml index 89c6e070e7ac..98572b4a9b60 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml @@ -40,6 +40,8 @@ required: - '#clock-cells' - '#reset-cells' +additionalProperties: false + examples: - | clock-controller@1800000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml index 18e4e77b8cfa..5a5b2214f0ca 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml @@ -56,6 +56,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | clock-controller@300000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml index 1d3cae980471..a0bb713929b0 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml @@ -66,6 +66,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml index 8cdece395eba..ce06f3f8c3e3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml @@ -40,6 +40,8 @@ required: - '#clock-cells' - '#reset-cells' +additionalProperties: false + examples: - | clock-controller@1800000 { diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml index ee4f968e2909..a345320e0e49 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml @@ -58,6 +58,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml index 888e9a708390..36f3b3668ced 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml @@ -56,6 +56,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml index d18f8ab9eeee..e533bb0cfd2b 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml @@ -74,6 +74,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: # Example for GCC for MSM8960: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml index 85518494ce43..f684fe67db84 100644 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml @@ -74,6 +74,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + if: properties: compatible: diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml index 7d853c1a85e5..d747bb58f0a7 100644 --- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml @@ -50,6 +50,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index 2cd158f13bab..c9fd748b4d7c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -35,6 +35,8 @@ required: - compatible - '#clock-cells' +additionalProperties: false + examples: # Example for GCC for SDM845: The below node should be defined inside # &apps_rsc node. diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml index 0429062f1585..58cdfd5924d3 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml @@ -58,6 +58,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml index 5785192cc4be..8635e35fd3f0 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml @@ -52,6 +52,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml index 31df901884ac..0071b9701960 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml @@ -48,6 +48,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml index 89269ddfbdcd..ad47d747a3e4 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml @@ -67,6 +67,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml index bac04f1c5d79..7a052ac5dc00 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml @@ -52,6 +52,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml index 9d216c0f11d4..2a6a81ab0318 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml @@ -48,6 +48,8 @@ required: - '#reset-cells' - '#power-domain-cells' +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml index d1205a6697a0..d8e573eeb5ec 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml @@ -107,6 +107,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false + examples: - | vpu: vpu@d0100000 { diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml index 2ca3ddbe1ff4..e7f2ad7dab5e 100644 --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml @@ -43,6 +43,8 @@ required: - interrupts - '#dma-cells' +additionalProperties: false + examples: - | dma@3000000 { diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml index f04870d84542..a5dc070d0ca7 100644 --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml @@ -68,6 +68,8 @@ required: - mbox-names - memory-region +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 0f6d8db18d6c..a15787e504f0 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -172,6 +172,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml index 878a2079ebb6..1bd2870c3a9c 100644 --- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml +++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml @@ -34,9 +34,12 @@ required: - compatible - reg +additionalProperties: false + examples: - | npe@c8006000 { compatible = "intel,ixp4xx-network-processing-engine"; reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; }; +... diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml index 64e279a4bc10..5f1ed20e43ee 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml @@ -47,6 +47,8 @@ required: - "#gpio-cells" - gpio-controller +additionalProperties: false + dependencies: interrupt-controller: [ interrupts ] diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml index d102888c1be7..a36aec27069c 100644 --- a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml @@ -49,6 +49,8 @@ required: - "#gpio-cells" - gpio-controller +additionalProperties: false + examples: - | logicvc: logicvc@43c00000 { diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 05fd9a404ff7..0b229a7d4a98 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -53,6 +53,8 @@ required: - interrupt-names - clocks +additionalProperties: false + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 6819cde050df..0407e45eb8c4 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -94,6 +94,8 @@ required: - interrupt-names - clocks +additionalProperties: false + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml index afde81be3c29..f5401cc8de4a 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml @@ -115,6 +115,8 @@ required: - clocks - clock-names +additionalProperties: false + allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml index f4dfa6fc724c..665c6e3b31d3 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml @@ -36,6 +36,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | rotator@12810000 { diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml index 2a9822075b36..154bee851139 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml @@ -47,6 +47,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index 6a742a51e2f9..44a63fffb4be 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -87,6 +87,8 @@ required: - reg +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml index 5d42e1304202..e8feee38c76c 100644 --- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml @@ -32,6 +32,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index 168235ad5d81..3f043e943668 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -76,6 +76,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml index c1c6d6f223cf..8723a336229e 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml @@ -36,6 +36,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml index 9acde6d2e2d9..a67ba67dab51 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml @@ -67,6 +67,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml index 91ab9c842273..77605f17901c 100644 --- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml +++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml @@ -53,6 +53,8 @@ required: - dout-gpios - avdd-supply +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 59009997dca0..118809a03279 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -32,6 +32,8 @@ required: - vref-supply - reg +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 0ce290473fb0..8ffeceb6abae 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -52,6 +52,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index acf36eef728b..b1627441a0b2 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -69,6 +69,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false + patternProperties: "^filter@[0-9]+$": type: object diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml index 19e53930ebf6..1fe561574019 100644 --- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml @@ -38,6 +38,8 @@ required: - compatible - vcc-supply +additionalProperties: false + examples: - | serial { diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml index 50a50a0d7070..a93d1972a5c2 100644 --- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml @@ -24,6 +24,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml index a285eaba7125..e51a585bd5a3 100644 --- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml @@ -34,6 +34,8 @@ required: - reg - vref-supply +additionalProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml b/Documentation/devicetree/bindings/iio/light/adux1020.yaml index 69bd5c06319d..d7d14f2f1c20 100644 --- a/Documentation/devicetree/bindings/iio/light/adux1020.yaml +++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml @@ -28,6 +28,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml index 1cc60d7ecfa0..1a88b3c253d5 100644 --- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml +++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml @@ -28,6 +28,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml index cbb00be8f359..0ea278b07d1c 100644 --- a/Documentation/devicetree/bindings/iio/light/isl29018.yaml +++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml @@ -38,6 +38,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/light/noa1305.yaml b/Documentation/devicetree/bindings/iio/light/noa1305.yaml index 17e7f140b69b..fe7bfe1adbda 100644 --- a/Documentation/devicetree/bindings/iio/light/noa1305.yaml +++ b/Documentation/devicetree/bindings/iio/light/noa1305.yaml @@ -29,6 +29,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml index aae8a6d627c9..f92bf7b2b7f0 100644 --- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml +++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml @@ -30,6 +30,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml index e86ef64ecf03..7b92ba8cbb9f 100644 --- a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml +++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml @@ -32,6 +32,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml index ed2c3d5eadf5..e8f7d1ada57b 100644 --- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml @@ -62,6 +62,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml index 0ff9b11f9d18..fb19a2d7a849 100644 --- a/Documentation/devicetree/bindings/iio/light/veml6030.yaml +++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml @@ -45,6 +45,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml index 9f5ca9c42025..64c18f1693f0 100644 --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml @@ -33,6 +33,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml index 5d4aec0e0d24..49257f9251e8 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -52,6 +52,8 @@ required: - vddd-supply - vdda-supply +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml index 4e80ea7c1475..7ac5eb7560e0 100644 --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml @@ -56,6 +56,8 @@ required: - trig-gpios - echo-gpios +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml index a079c9921af6..ada55f186f3c 100644 --- a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml @@ -42,6 +42,8 @@ required: - compatible - ping-gpios +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index d4922f9f0376..acc030c1b20e 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -398,6 +398,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml index b98bf9363c8f..2384465eaa19 100644 --- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml +++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml @@ -26,6 +26,8 @@ required: - compatible - enable-gpios +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml index 2f2e0b6ebbbd..3a2ad6ec64db 100644 --- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml +++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml @@ -33,3 +33,6 @@ properties: required: - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml index 507c141ea760..ccc507f384d2 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml @@ -44,6 +44,8 @@ required: - interrupt-controller - '#interrupt-cells' +additionalProperties: false + examples: - | intcon: interrupt-controller@c8003000 { diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml index 7cdd3aaa2ba4..0e33cd9e010e 100644 --- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml +++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml @@ -80,6 +80,8 @@ required: - clock-names - "#iommu-cells" +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml index 8c43f1e1bf7d..c6f96cabd4d1 100644 --- a/Documentation/devicetree/bindings/leds/leds-max77650.yaml +++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml @@ -49,3 +49,6 @@ required: - compatible - "#address-cells" - "#size-cells" +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml index b50f4bcc98f1..90edf9d33b33 100644 --- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml @@ -50,3 +50,6 @@ patternProperties: required: - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml index 319280563648..aa2b3bf56b57 100644 --- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml +++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml @@ -41,6 +41,8 @@ required: - interrupts - "#mbox-cells" +additionalProperties: false + examples: - | mailbox@c883c404 { diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml index 335717e15970..37d77e065491 100644 --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -124,6 +124,8 @@ required: - amlogic,ao-sysctrl - amlogic,canvas +additionalProperties: false + examples: - | vdec: video-decoder@c8820000 { diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml index e8ce37fcbfec..95ffa8bc0533 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml @@ -82,6 +82,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | cec_AO: cec@100 { diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml index 8e9251a0f9ef..fcb5f13704a5 100644 --- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml +++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml @@ -59,6 +59,8 @@ required: - interrupts - port +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml index 480385789394..b0a0f0d3d9d4 100644 --- a/Documentation/devicetree/bindings/mfd/max77650.yaml +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml @@ -73,6 +73,8 @@ required: - gpio-controller - "#gpio-cells" +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml index 38dc4f8b0ceb..3a6a1a26e2b3 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml @@ -77,6 +77,8 @@ required: - gpio-controller - "#gpio-cells" +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml index 0ea21a6f70b4..38ab0499102d 100644 --- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml @@ -38,6 +38,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index b9e9696da5be..976f139bb66e 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -167,6 +167,8 @@ required: - '#address-cells' - '#size-cells' +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml index e5922b427342..c03b83103e87 100644 --- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml @@ -34,6 +34,8 @@ required: - resets - "#phy-cells" +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml index 346f9c35427c..453c083cf44c 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml @@ -44,6 +44,8 @@ required: - reset-names - "#phy-cells" +additionalProperties: false + examples: - | phy@46000 { diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml index 0ccee64c6962..9a346d6290d9 100644 --- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml @@ -40,6 +40,8 @@ required: - reg - clocks +additionalProperties: false + examples: - | sysconf: chiptop@e0200000 { diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml index 5ab436189f3b..00609ace677c 100644 --- a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml +++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml @@ -31,6 +31,8 @@ required: - reset-gpios - "#phy-cells" +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index 452cee1aed32..fd1982c56104 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -159,6 +159,8 @@ required: - "#reset-cells" - ranges +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 135c7dfbc180..7651a675ab2d 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -57,6 +57,8 @@ patternProperties: required: - compatible +additionalProperties: false + examples: - | syscon: scu@1e6e2000 { diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 824f7fd1d51b..36feaf5e2dff 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -70,6 +70,8 @@ required: - compatible - aspeed,external-nodes +additionalProperties: false + examples: - | apb { diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index ac8d1c30a8ed..45af29bc3202 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -92,6 +92,8 @@ patternProperties: required: - compatible +additionalProperties: false + examples: - | syscon: scu@1e6e2000 { diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index ef4de32cb17c..46a0478cb924 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -194,6 +194,8 @@ required: - ranges - pins-are-numbered +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index d3098c924b25..6c6079fe1351 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -68,6 +68,8 @@ required: - "#power-domain-cells" - amlogic,ao-sysctrl +additionalProperties: false + examples: - | pwrc: power-controller { diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml index 520e07e6f21b..3412fe7e1e80 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml @@ -41,6 +41,8 @@ required: - regmap - offset +additionalProperties: false + allOf: - if: not: diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml index d38006b1f1f4..b80772cb9f06 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml @@ -41,6 +41,8 @@ required: - regmap - offset +additionalProperties: false + allOf: - if: not: diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml index deef010ec535..62eeddb65aed 100644 --- a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml @@ -32,3 +32,6 @@ properties: required: - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml index 9e21b83d717e..239b49fad805 100644 --- a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml +++ b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml @@ -55,6 +55,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | i2c@1 { diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml index 50690487edc8..ce0a4021ae7f 100644 --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml @@ -29,3 +29,6 @@ patternProperties: required: - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml index b3f57d81f007..92922d3afd14 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml @@ -29,6 +29,8 @@ required: - reg - "#reset-cells" +additionalProperties: false + examples: - | reset-controller@c884404 { diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml index 411bd76f1b64..512a33bdb208 100644 --- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml +++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml @@ -28,6 +28,8 @@ required: - reg - "#reset-cells" +additionalProperties: false + examples: - | reset-controller@8b2c800 { diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml index a9ff3cb35c5e..444be32a8a29 100644 --- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml +++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml @@ -29,6 +29,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | rng@c8834000 { diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml index 42d9a38e4e1a..89ab67f20a7f 100644 --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml @@ -35,6 +35,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | rng { diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml index dcff573cbdb1..b95cb017f469 100644 --- a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml @@ -51,6 +51,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml index 0a54296d7218..48c6cafca90c 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml @@ -111,6 +111,8 @@ required: - clocks - interrupts +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml index 214fe8beddc3..d4178ab0d675 100644 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml @@ -62,6 +62,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | serial@84c0 { diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml index f548594d020b..cb008fd188d8 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml @@ -40,6 +40,8 @@ required: - compatible - reg +additionalProperties: false + examples: - | canvas: video-lut@48 { diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml index 75e0cbe6be70..76ee695097bf 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml @@ -59,6 +59,8 @@ required: - iovdd-supply - dvdd-supply +additionalProperties: false + examples: - | i2c { diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index 38eaf0c028f9..a495d5fc0d23 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -139,6 +139,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: false + examples: - | codec@1,0{ diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml index 140a37fc3c0b..d1b65554e681 100644 --- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml @@ -63,6 +63,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | sh_fsi2: sound@ec230000 { diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml index c6b244352d05..8ff2d39e7d17 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml @@ -69,6 +69,8 @@ required: - cpu - codec +additionalProperties: false + examples: - | sound { diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml index 53e3bad4178c..b2ad093d94df 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml @@ -115,6 +115,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml index 469cec133647..930188bc5e6a 100644 --- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml +++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml @@ -56,6 +56,8 @@ required: - '#size-cells' - ranges +additionalProperties: false + patternProperties: "-sram@[0-9a-f]+$": type: object diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml index 93fe7b10a82e..e43ec50bda37 100644 --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml @@ -42,6 +42,8 @@ required: - clocks - amlogic,ao-secure +additionalProperties: false + examples: - | cpu_temp: temperature-sensor@ff634800 { diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml index 6deead07728e..fa255672e8e5 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml @@ -82,6 +82,8 @@ properties: required: - compatible +additionalProperties: false + oneOf: - required: - interrupts diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index f7ef6646bade..582bbef62b95 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -95,6 +95,8 @@ required: - '#address-cells' - '#size-cells' +additionalProperties: false + examples: - | timer@f0000000 { diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml index 21c24a8e28fd..4956c8f409d2 100644 --- a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml +++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml @@ -35,6 +35,8 @@ required: - reg - clocks +additionalProperties: false + examples: - | timer@2c000600 { diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml index 2807225db902..1a721d8af67a 100644 --- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml +++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml @@ -32,6 +32,8 @@ required: - reg - interrupts +additionalProperties: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml index 273e359854dd..37bd01a62c52 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml @@ -52,6 +52,8 @@ required: - interrupts - reg +additionalProperties: false + examples: - | // In this example, the IP contains two local timers, using separate diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 51d1f6e43c02..bcae5f9b1d7f 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -369,4 +369,6 @@ required: - compatible - reg +additionalProperties: false + ... -- cgit v1.2.3 From 39648d052f842d0f6c95dacdeb6317f27b9e71f9 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Tue, 17 Mar 2020 10:39:08 +0100 Subject: dt-bindings: arm: l2x0: Tauros 3 is PL310 compatible The validation is unhappy about mmp3-dell-ariel declaring its marvell,tauros3-cache node to be compatible with arm,pl310-cache: mmp3-dell-ariel.dt.yaml: cache-controller@d0020000: compatible: Additional items are not allowed ('arm,pl310-cache' was unexpected) mmp3-dell-ariel.dt.yaml: cache-controller@d0020000: compatible: ['marvell,tauros3-cache', 'arm,pl310-cache'] is too long Let's allow this -- Tauros 3 is designed to be compatible with PL310. Signed-off-by: Lubomir Rintel [robh: fixup indentation] Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/l2c2x0.yaml | 45 ++++++++++++----------- 1 file changed, 24 insertions(+), 21 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml index 913a8cd8b2c0..5d1d50eea26e 100644 --- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml +++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml @@ -29,27 +29,30 @@ allOf: properties: compatible: - enum: - - arm,pl310-cache - - arm,l220-cache - - arm,l210-cache - # DEPRECATED by "brcm,bcm11351-a2-pl310-cache" - - bcm,bcm11351-a2-pl310-cache - # For Broadcom bcm11351 chipset where an - # offset needs to be added to the address before passing down to the L2 - # cache controller - - brcm,bcm11351-a2-pl310-cache - # Marvell Controller designed to be - # compatible with the ARM one, with system cache mode (meaning - # maintenance operations on L1 are broadcasted to the L2 and L2 - # performs the same operation). - - marvell,aurora-system-cache - # Marvell Controller designed to be - # compatible with the ARM one with outer cache mode. - - marvell,aurora-outer-cache - # Marvell Tauros3 cache controller, compatible - # with arm,pl310-cache controller. - - marvell,tauros3-cache + oneOf: + - enum: + - arm,pl310-cache + - arm,l220-cache + - arm,l210-cache + # DEPRECATED by "brcm,bcm11351-a2-pl310-cache" + - bcm,bcm11351-a2-pl310-cache + # For Broadcom bcm11351 chipset where an + # offset needs to be added to the address before passing down to the L2 + # cache controller + - brcm,bcm11351-a2-pl310-cache + # Marvell Controller designed to be + # compatible with the ARM one, with system cache mode (meaning + # maintenance operations on L1 are broadcasted to the L2 and L2 + # performs the same operation). + - marvell,aurora-system-cache + # Marvell Controller designed to be + # compatible with the ARM one with outer cache mode. + - marvell,aurora-outer-cache + - items: + # Marvell Tauros3 cache controller, compatible + # with arm,pl310-cache controller. + - const: marvell,tauros3-cache + - const: arm,pl310-cache cache-level: const: 2 -- cgit v1.2.3 From c734a7cc774758b6e8dffb70d1423529beb76e46 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Tue, 17 Mar 2020 10:39:09 +0100 Subject: dt-bindings: arm: mrvl: Add missing compatible strings Add compatible strings for the boards we have in tree. At the same time, fix the MMP3 compatible string: the preferred vendor name for Marvell is "marvell", not "mrvl", and indeed "marvell,mmp3" has been actively used, not "mrvl,mmp3". Fixes: 95aecb71b84e ("dt-bindings: arm: mrvl: Document MMP3 compatible string") Signed-off-by: Lubomir Rintel Reviewed-by: Andrew Lunn Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml index 818dfe6de512..3235ec9e9bad 100644 --- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml +++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml @@ -28,8 +28,11 @@ properties: items: - enum: - mrvl,mmp2-brownstone + - olpc,xo-1.75 - const: mrvl,mmp2 - description: MMP3 based boards items: - - const: mrvl,mmp3 + - enum: + - dell,wyse-ariel + - const: marvell,mmp3 ... -- cgit v1.2.3 From cdcbb193883461273c78cec918c15bd916a2c85c Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Tue, 17 Mar 2020 10:39:10 +0100 Subject: dt-bindings: Add "mrvl", a legacy vendor prefix for Marvell While the preferred vendor prefix is "marvell", "mrvl" is used by many older bindings already. Add it, while also marking it deprecated. Signed-off-by: Lubomir Rintel Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 03b780626435..f53c5f31dc8b 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -639,6 +639,9 @@ patternProperties: description: Monolithic Power Systems Inc. "^mqmaker,.*": description: mqmaker Inc. + "^mrvl,.*": + description: Marvell Technology Group Ltd. + deprecated: true "^mscc,.*": description: Microsemi Corporation "^msi,.*": -- cgit v1.2.3 From d0539d208de818662437be670b3ad32ad2dae26f Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Tue, 17 Mar 2020 10:39:14 +0100 Subject: dt-bindings: phy: Convert phy-mmp3-usb to json-schema A rather straightforward conversion of the phy-mmp3-usb binding to DT schema format using json-schema. Signed-off-by: Lubomir Rintel [robh: add additionalProperties] Signed-off-by: Rob Herring --- .../bindings/phy/marvell,mmp3-usb-phy.yaml | 42 ++++++++++++++++++++++ .../devicetree/bindings/phy/phy-mmp3-usb.txt | 13 ------- 2 files changed, 42 insertions(+), 13 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml new file mode 100644 index 000000000000..c97043eaa8fb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +# Copyright 2019,2020 Lubomir Rintel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/marvell,mmp3-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP3 USB PHY bindings + +maintainers: + - Lubomir Rintel + +properties: + $nodename: + pattern: '^usb-phy@[a-f0-9]+$' + + compatible: + const: marvell,mmp3-usb-phy + + reg: + maxItems: 1 + description: base address of the device + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - '#phy-cells' + +additionalProperties: false + +examples: + - | + usb-phy@d4207000 { + compatible = "marvell,mmp3-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt deleted file mode 100644 index 7183b9102f91..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt +++ /dev/null @@ -1,13 +0,0 @@ -Marvell MMP3 USB PHY --------------------- - -Required properties: -- compatible: must be "marvell,mmp3-usb-phy" -- #phy-cells: must be 0 - -Example: - usb-phy: usb-phy@d4207000 { - compatible = "marvell,mmp3-usb-phy"; - reg = <0xd4207000 0x40>; - #phy-cells = <0>; - }; -- cgit v1.2.3 From 8f5a0a3750c171d1c717e54b017ecd84c555492d Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Wed, 11 Mar 2020 17:32:21 +0100 Subject: dt-bindings: thermal: rcar-thermal: Convert bindings to json-schema MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Convert Renesas R-Car Thermal bindings documentation to json-schema. Signed-off-by: Niklas Söderlund Signed-off-by: Rob Herring --- .../devicetree/bindings/thermal/rcar-thermal.txt | 78 ------------ .../devicetree/bindings/thermal/rcar-thermal.yaml | 139 +++++++++++++++++++++ 2 files changed, 139 insertions(+), 78 deletions(-) delete mode 100644 Documentation/devicetree/bindings/thermal/rcar-thermal.txt create mode 100644 Documentation/devicetree/bindings/thermal/rcar-thermal.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt deleted file mode 100644 index 196112d23b1e..000000000000 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ /dev/null @@ -1,78 +0,0 @@ -* Renesas R-Car Thermal - -Required properties: -- compatible : "renesas,thermal-", - "renesas,rcar-gen2-thermal" (with thermal-zone) or - "renesas,rcar-thermal" (without thermal-zone) as - fallback except R-Car V3M/E3/D3 and RZ/G2E. - Examples with soctypes are: - - "renesas,thermal-r8a73a4" (R-Mobile APE6) - - "renesas,thermal-r8a7743" (RZ/G1M) - - "renesas,thermal-r8a7744" (RZ/G1N) - - "renesas,thermal-r8a774c0" (RZ/G2E) - - "renesas,thermal-r8a7779" (R-Car H1) - - "renesas,thermal-r8a7790" (R-Car H2) - - "renesas,thermal-r8a7791" (R-Car M2-W) - - "renesas,thermal-r8a7792" (R-Car V2H) - - "renesas,thermal-r8a7793" (R-Car M2-N) - - "renesas,thermal-r8a77970" (R-Car V3M) - - "renesas,thermal-r8a77990" (R-Car E3) - - "renesas,thermal-r8a77995" (R-Car D3) -- reg : Address range of the thermal registers. - The 1st reg will be recognized as common register - if it has "interrupts". - -Option properties: - -- interrupts : If present should contain 3 interrupts for - R-Car V3M/E3/D3 and RZ/G2E or 1 interrupt otherwise. - -Example (non interrupt support): - -thermal@ffc48000 { - compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; - reg = <0xffc48000 0x38>; -}; - -Example (interrupt support): - -thermal@e61f0000 { - compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; - reg = <0xe61f0000 0x14 - 0xe61f0100 0x38 - 0xe61f0200 0x38 - 0xe61f0300 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; -}; - -Example (with thermal-zone): - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <115000>; - hysteresis = <0>; - type = "critical"; - }; - }; - cooling-maps { - }; - }; -}; - -thermal: thermal@e61f0000 { - compatible = "renesas,thermal-r8a7790", - "renesas,rcar-gen2-thermal", - "renesas,rcar-thermal"; - reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; - power-domains = <&cpg_clocks>; - #thermal-sensor-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml new file mode 100644 index 000000000000..d2f4f1b063ac --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2020 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/rcar-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Thermal + +maintainers: + - Niklas Söderlund + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,thermal-r8a73a4 # R-Mobile APE6 + - renesas,thermal-r8a7779 # R-Car H1 + - const: renesas,rcar-thermal # Generic without thermal-zone + - items: + - enum: + - renesas,thermal-r8a7743 # RZ/G1M + - renesas,thermal-r8a7744 # RZ/G1N + - const: renesas,rcar-gen2-thermal # Generic thermal-zone + - items: + - enum: + - renesas,thermal-r8a7790 # R-Car H2 + - renesas,thermal-r8a7791 # R-Car M2-W + - renesas,thermal-r8a7792 # R-Car V2H + - renesas,thermal-r8a7793 # R-Car M2-N + - const: renesas,rcar-gen2-thermal # Generic thermal-zone + - const: renesas,rcar-thermal # Generic without thermal-zone + - items: + - enum: + - renesas,thermal-r8a774c0 # RZ/G2E + - renesas,thermal-r8a77970 # R-Car V3M + - renesas,thermal-r8a77990 # R-Car E3 + - renesas,thermal-r8a77995 # R-Car D3 + reg: + description: + Address ranges of the thermal registers. If more then one range is given + the first one must be the common registers followed by each sensor + according the the datasheet. + minItems: 1 + maxItems: 4 + + interrupts: + minItems: 1 + maxItems: 3 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +if: + properties: + compatible: + contains: + enum: + - renesas,thermal-r8a73a4 # R-Mobile APE6 + - renesas,thermal-r8a7779 # R-Car H1 +then: + required: + - compatible + - reg +else: + required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + +examples: + # Example (non interrupt support) + - | + thermal@ffc48000 { + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; + reg = <0xffc48000 0x38>; + }; + + # Example (interrupt support) + - | + #include + #include + #include + + thermal@e61f0000 { + compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, + <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; + interrupts = ; + clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>; + power-domains = <&pd_c5>; + }; + + # Example (with thermal-zone) + - | + #include + #include + #include + + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7790", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>; + interrupts = ; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; -- cgit v1.2.3 From d2423aa0038b8d448153537493cf2c609edd8a4a Mon Sep 17 00:00:00 2001 From: Akash Asthana Date: Fri, 13 Mar 2020 16:45:20 +0530 Subject: dt-bindings: spi: Convert QSPI bindings to YAML Convert QSPI bindings to DT schema format using json-schema. Signed-off-by: Akash Asthana Signed-off-by: Rob Herring --- .../devicetree/bindings/spi/qcom,spi-qcom-qspi.txt | 36 ---------- .../bindings/spi/qcom,spi-qcom-qspi.yaml | 79 ++++++++++++++++++++++ 2 files changed, 79 insertions(+), 36 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt deleted file mode 100644 index 1d64b61f5171..000000000000 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt +++ /dev/null @@ -1,36 +0,0 @@ -Qualcomm Quad Serial Peripheral Interface (QSPI) - -The QSPI controller allows SPI protocol communication in single, dual, or quad -wire transmission modes for read/write access to slaves such as NOR flash. - -Required properties: -- compatible: An SoC specific identifier followed by "qcom,qspi-v1", such as - "qcom,sdm845-qspi", "qcom,qspi-v1" -- reg: Should contain the base register location and length. -- interrupts: Interrupt number used by the controller. -- clocks: Should contain the core and AHB clock. -- clock-names: Should be "core" for core clock and "iface" for AHB clock. - -SPI slave nodes must be children of the SPI master node and can contain -properties described in Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - - qspi: spi@88df000 { - compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; - reg = <0x88df000 0x600>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clock-names = "iface", "core"; - clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, - <&gcc GCC_QSPI_CORE_CLK>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - spi-tx-bus-width = <2>; - spi-rx-bus-width = <2>; - }; - }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml new file mode 100644 index 000000000000..9582d373d8da --- /dev/null +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Quad Serial Peripheral Interface (QSPI) + +maintainers: + - Mukesh Savaliya + - Akash Asthana + +description: + The QSPI controller allows SPI protocol communication in single, dual, or quad + wire transmission modes for read/write access to slaves such as NOR flash. + +allOf: + - $ref: /spi/spi-controller.yaml# + +properties: + compatible: + items: + - const: qcom,sdm845-qspi + - const: qcom,qspi-v1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: iface + - const: core + + clocks: + items: + - description: AHB clock + - description: QSPI core clock + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + +examples: + - | + #include + #include + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + + qspi: spi@88df000 { + compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; + reg = <0 0x88df000 0 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-names = "iface", "core"; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; + + }; + }; +... -- cgit v1.2.3 From 8f9c291558ea833a82fcf72fefb30bfa4b7be3b6 Mon Sep 17 00:00:00 2001 From: Akash Asthana Date: Fri, 13 Mar 2020 16:45:21 +0530 Subject: dt-bindings: spi: Add interconnect binding for QSPI Add documentation for the interconnect and interconnect-names properties for QSPI. Signed-off-by: Akash Asthana Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index 9582d373d8da..0cf470eaf2a0 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -40,6 +40,15 @@ properties: - description: AHB clock - description: QSPI core clock + interconnects: + minItems: 1 + maxItems: 2 + + interconnect-names: + items: + - const: qspi-config + - const: qspi-memory + required: - compatible - reg -- cgit v1.2.3 From c80f0104b34c987f233a034c1d50fa150770a76b Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Sun, 28 Jul 2019 02:30:18 -0700 Subject: dt-bindings: interrupt-controller: msi: Correct msi-controller@c's reg The base address of msi-controller@c should be set to c. Signed-off-by: Bin Meng Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/interrupt-controller/msi.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/interrupt-controller/msi.txt b/Documentation/devicetree/bindings/interrupt-controller/msi.txt index c60c034dcf19..c20b51df7138 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/msi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/msi.txt @@ -98,7 +98,7 @@ Example }; msi_c: msi-controller@c { - reg = <0xb 0xf00>; + reg = <0xc 0xf00>; compatible = "vendor-b,another-controller"; msi-controller; /* Each device has some unique ID */ -- cgit v1.2.3 From 7a3a2a646b2ffb70652c9b639ed12a07d33b4653 Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Fri, 13 Mar 2020 17:57:00 +0100 Subject: dt-bindings: leds: common: fix example for gpio-leds The preferred form for gpio-leds compatible subnodes is: ^led-[0-9a-f]$ Fix example by changing led0 and led1 to led-0 and led-1. Signed-off-by: Johan Jonker Acked-by: Pavel Machek Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/leds/common.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index c60b994fe116..4c270fde4567 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -167,13 +167,13 @@ examples: led-controller { compatible = "gpio-leds"; - led0 { + led-0 { function = LED_FUNCTION_STATUS; linux,default-trigger = "heartbeat"; gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; }; - led1 { + led-1 { function = LED_FUNCTION_USB; gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; trigger-sources = <&ohci_port1>, <&ehci_port1>; -- cgit v1.2.3 From 63d6e721527e175edbbe8513cba8e4a0caf94da5 Mon Sep 17 00:00:00 2001 From: Prashant Malani Date: Mon, 16 Mar 2020 02:00:15 -0700 Subject: dt-bindings: Add cros-ec Type C port driver Some Chrome OS devices with Embedded Controllers (EC) can read and modify Type C port state. Add an entry in the DT Bindings documentation that lists out the logical device and describes the relevant port information, to be used by the corresponding driver. Signed-off-by: Prashant Malani Reviewed-by: Enric Balletbo i Serra Reviewed-by: Benson Leung Signed-off-by: Rob Herring --- .../bindings/chrome/google,cros-ec-typec.yaml | 54 ++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml new file mode 100644 index 000000000000..6d7396ab8bee --- /dev/null +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/chrome/google,cros-ec-typec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google Chrome OS EC(Embedded Controller) Type C port driver. + +maintainers: + - Benson Leung + - Prashant Malani + +description: + Chrome OS devices have an Embedded Controller(EC) which has access to + Type C port state. This node is intended to allow the host to read and + control the Type C ports. The node for this device should be under a + cros-ec node like google,cros-ec-spi. + +properties: + compatible: + const: google,cros-ec-typec + + connector: + $ref: /schemas/connector/usb-connector.yaml# + +required: + - compatible + +examples: + - |+ + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + + typec { + compatible = "google,cros-ec-typec"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + try-power-role = "source"; + }; + }; + }; + }; -- cgit v1.2.3 From ff17bad8721c4df7c31e4ec669cafb4dbf253c86 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 16 Mar 2020 11:14:53 +0100 Subject: dt-bindings: pwm: renesas-tpu: Document more R-Car Gen2 support All R-Car Gen2 SoCs have a Renesas Timer Pulse Unit. Document support for the missing variants. No driver change is needed due to the fallback compatible string. Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml index 4969a954993c..4bf62a3d5bba 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml @@ -19,6 +19,10 @@ properties: - renesas,tpu-r8a7744 # RZ/G1N - renesas,tpu-r8a7745 # RZ/G1E - renesas,tpu-r8a7790 # R-Car H2 + - renesas,tpu-r8a7791 # R-Car M2-W + - renesas,tpu-r8a7792 # R-Car V2H + - renesas,tpu-r8a7793 # R-Car M2-N + - renesas,tpu-r8a7794 # R-Car E2 - renesas,tpu-r8a7795 # R-Car H3 - renesas,tpu-r8a7796 # R-Car M3-W - renesas,tpu-r8a77965 # R-Car M3-N -- cgit v1.2.3 From 92f2b6ac29350a2944cca111946e3c74bb145a35 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 17 Mar 2020 14:10:43 +0100 Subject: docs: dt: fix references to m_can.txt file This file was converted to json and renamed. Update its references accordingly. Fixes: 824674b59f72 ("dt-bindings: net: can: Convert M_CAN to json-schema") Signed-off-by: Mauro Carvalho Chehab Acked-by: Marc Kleine-Budde Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/net/can/tcan4x5x.txt | 2 +- MAINTAINERS | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 6bdcc3f84bd3..3613c2c8f75d 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -14,7 +14,7 @@ Required properties: the interrupt. - interrupts: interrupt specification for data-ready. -See Documentation/devicetree/bindings/net/can/m_can.txt for additional +See Documentation/devicetree/bindings/net/can/bosch,m_can.yaml for additional required property details. Optional properties: diff --git a/MAINTAINERS b/MAINTAINERS index 16760fc4f64b..8b596f3d8397 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10230,7 +10230,7 @@ M: Dan Murphy M: Sriram Dash L: linux-can@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/net/can/m_can.txt +F: Documentation/devicetree/bindings/net/can/bosch,m_can.yaml F: drivers/net/can/m_can/m_can.c F: drivers/net/can/m_can/m_can.h F: drivers/net/can/m_can/m_can_platform.c -- cgit v1.2.3 From da392fb119d319a54db0b0682566768a7d6366e8 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 17 Mar 2020 14:10:44 +0100 Subject: docs: dt: fix references to ap806-system-controller.txt ap806-system-controller.txt was renamed to ap80x-system-controller.txt. Update its references accordingly. Fixes: 2537831bbc19 ("dt-bindings: ap80x: replace AP806 with AP80x") Signed-off-by: Mauro Carvalho Chehab Acked-by: Bartosz Golaszewski Reviewed-by: Miquel Raynal Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/gpio/gpio-mvebu.txt | 2 +- Documentation/devicetree/bindings/thermal/armada-thermal.txt | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt index 2e097b57f170..0fc6700ed800 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt @@ -14,7 +14,7 @@ Required properties: "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K SoCs (either from AP or CP), see - Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt + Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt for specific details about the offset property. - reg: Address and length of the register set for the device. Only one diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt index f3b441100890..b0bee7e42038 100644 --- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -12,7 +12,7 @@ Required properties: Note: these bindings are deprecated for AP806/CP110 and should instead follow the rules described in: -Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt +Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt - reg: Device's register space. -- cgit v1.2.3 From e64ca27ab9205b993dc5aa7a1ad1d093f1b9ab76 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 17 Mar 2020 14:10:45 +0100 Subject: docs: dt: fix a broken reference to input.yaml The old file was converted to yaml, but its reference was still pointing to the old one. Fixes: 7cef1079e3ad ("dt-bindings: input: Add common input binding in json-schema") Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index e07735a8c2c7..8cac6fafaab0 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -164,7 +164,7 @@ Required properties: - compatible: should be: "fsl,imx8qxp-sc-key" followed by "fsl,imx-sc-key"; -- linux,keycodes: See Documentation/devicetree/bindings/input/keys.txt +- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml Example (imx8qxp): ------------- -- cgit v1.2.3 From 43add0bd1f56e412087508ad850d6278e4aa2891 Mon Sep 17 00:00:00 2001 From: Pascal Roeleven Date: Fri, 20 Mar 2020 12:21:34 +0100 Subject: dt-bindings: vendor-prefixes: Add Topwise Topwise Communication Co,. Ltd. is a company based in Shenzhen. They manufacture all kind of products but seem to be focusing on POS nowadays. Signed-off-by: Pascal Roeleven Acked-by: Sam Ravnborg Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index f53c5f31dc8b..e41153c6cef7 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1001,6 +1001,8 @@ patternProperties: "^toppoly,.*": description: TPO (deprecated, use tpo) deprecated: true + "^topwise,.*": + description: Topwise Communication Co., Ltd. "^toradex,.*": description: Toradex AG "^toshiba,.*": -- cgit v1.2.3 From f756619f26edf74ad55d2151a6757a260e660fa8 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Tue, 24 Mar 2020 09:43:22 -0500 Subject: dt-bindings: vendor-prefixes: Add Beacon vendor prefix Beacon EmebeddedWorks is the brand owned by Compass Electronics Group, LLC based out of the United States. https://beaconembedded.com/ Signed-off-by: Adam Ford Reviewed-by: Fabio Estevam Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index e41153c6cef7..65e78b25715f 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -141,6 +141,8 @@ patternProperties: description: Shenzhen AZW Technology Co., Ltd. "^bananapi,.*": description: BIPAI KEJI LIMITED + "^beacon,.*": + description: Compass Electronics Group, LLC "^bhf,.*": description: Beckhoff Automation GmbH & Co. KG "^bitmain,.*": -- cgit v1.2.3 From b9589def9f9af93d9d4c5969c9a6c166f070e36e Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 24 Mar 2020 12:05:12 -0600 Subject: dt-bindings: thermal: tsens: Fix nvmem-cell-names schema There's a typo 'nvmem-cells-names' in the schema which means the correct 'nvmem-cell-names' in the examples are not checked. The possible values are wrong too both in that the 2nd entry is not specified correctly and the values are just wrong based on the dts files in the kernel. Fixes: a877e768f655 ("dt-bindings: thermal: tsens: Convert over to a yaml schema") Cc: Andy Gross Cc: Bjorn Andersson Cc: Amit Kucheria Cc: Zhang Rui Cc: Daniel Lezcano Cc: linux-arm-msm@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring Reviewed-by: Amit Kucheria --- Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index eef13b9446a8..a4df53228122 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -53,13 +53,12 @@ properties: description: Reference to an nvmem node for the calibration data - nvmem-cells-names: + nvmem-cell-names: minItems: 1 maxItems: 2 items: - - enum: - - caldata - - calsel + - const: calib + - const: calib_sel "#qcom,sensors": allOf: @@ -125,7 +124,7 @@ examples: <0x4a8000 0x1000>; /* SROT */ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; - nvmem-cell-names = "caldata", "calsel"; + nvmem-cell-names = "calib", "calib_sel"; interrupts = ; interrupt-names = "uplow"; -- cgit v1.2.3 From 27f747b12313d0ec1823c68f0ff2a369d77ec2f0 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 24 Mar 2020 12:05:13 -0600 Subject: dt-bindings: thermal: tsens: Set 'additionalProperties: false' Ensure the node only contains the properties listed in the schema by setting 'additionalProperties: false'. Doing this requires reworking the interrupt properties schemas so that they are defined in the main 'properties' section. Fixes: a877e768f655 ("dt-bindings: thermal: tsens: Convert over to a yaml schema") Cc: Andy Gross Cc: Bjorn Andersson Cc: Amit Kucheria Cc: Zhang Rui Cc: Daniel Lezcano Cc: linux-arm-msm@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring Reviewed-by: Amit Kucheria --- .../devicetree/bindings/thermal/qcom-tsens.yaml | 28 ++++++++++++++-------- 1 file changed, 18 insertions(+), 10 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index a4df53228122..a57b76ad7dea 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -47,6 +47,18 @@ properties: - description: TM registers - description: SROT registers + interrupts: + minItems: 1 + items: + - description: Combined interrupt if upper or lower threshold crossed + - description: Interrupt if critical threshold crossed + + interrupt-names: + minItems: 1 + items: + - const: uplow + - const: critical + nvmem-cells: minItems: 1 maxItems: 2 @@ -89,22 +101,16 @@ allOf: then: properties: interrupts: - items: - - description: Combined interrupt if upper or lower threshold crossed + maxItems: 1 interrupt-names: - items: - - const: uplow + maxItems: 1 else: properties: interrupts: - items: - - description: Combined interrupt if upper or lower threshold crossed - - description: Interrupt if critical threshold crossed + minItems: 2 interrupt-names: - items: - - const: uplow - - const: critical + minItems: 2 required: - compatible @@ -114,6 +120,8 @@ required: - interrupt-names - "#thermal-sensor-cells" +additionalProperties: false + examples: - | #include -- cgit v1.2.3 From a5427e4e38a22f7e0ced0b7bd6cb16873a2644b7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 25 Mar 2020 10:54:42 +0100 Subject: dt-bindings: serial: Document serialN aliases Document the format of aliases referring to UARTs. Signed-off-by: Geert Uytterhoeven Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/serial/serial.yaml | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index dd97ecd1a7fe..53204d90d0c7 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -15,6 +15,10 @@ description: device tree. Whether these properties apply to a particular device depends on the DT bindings for the actual device. + Each enabled UART may have an optional "serialN" alias in the "aliases" node, + where N is the port number (non-negative decimal integer) as printed on the + label next to the physical port. + properties: $nodename: pattern: "^serial(@.*)?$" -- cgit v1.2.3 From 384d00fae8e51f8ff812937b2e654ba3da858227 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 25 Mar 2020 10:57:21 +0100 Subject: dt-bindings: serial: sh-sci: Convert to json-schema Convert the Renesas Serial Communication Interface ((H)SCI(F)(A|B)) Device Tree binding documentation to json-schema. Split the bindings in 5 files, one per major type, to ease expressing constraints. Signed-off-by: Geert Uytterhoeven Signed-off-by: Rob Herring --- .../devicetree/bindings/serial/renesas,hscif.yaml | 135 ++++++++++++++++ .../bindings/serial/renesas,sci-serial.txt | 150 ------------------ .../devicetree/bindings/serial/renesas,sci.yaml | 69 +++++++++ .../devicetree/bindings/serial/renesas,scif.yaml | 172 +++++++++++++++++++++ .../devicetree/bindings/serial/renesas,scifa.yaml | 107 +++++++++++++ .../devicetree/bindings/serial/renesas,scifb.yaml | 98 ++++++++++++ 6 files changed, 581 insertions(+), 150 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/renesas,hscif.yaml delete mode 100644 Documentation/devicetree/bindings/serial/renesas,sci-serial.txt create mode 100644 Documentation/devicetree/bindings/serial/renesas,sci.yaml create mode 100644 Documentation/devicetree/bindings/serial/renesas,scif.yaml create mode 100644 Documentation/devicetree/bindings/serial/renesas,scifa.yaml create mode 100644 Documentation/devicetree/bindings/serial/renesas,scifb.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml new file mode 100644 index 000000000000..91101521ef07 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,hscif.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas High Speed Serial Communication Interface with FIFO (HSCIF) + +maintainers: + - Geert Uytterhoeven + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,hscif-r8a7778 # R-Car M1 + - renesas,hscif-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-hscif # R-Car Gen1 + - const: renesas,hscif # generic HSCIF compatible UART + + - items: + - enum: + - renesas,hscif-r8a7743 # RZ/G1M + - renesas,hscif-r8a7744 # RZ/G1N + - renesas,hscif-r8a7745 # RZ/G1E + - renesas,hscif-r8a77470 # RZ/G1C + - renesas,hscif-r8a7790 # R-Car H2 + - renesas,hscif-r8a7791 # R-Car M2-W + - renesas,hscif-r8a7792 # R-Car V2H + - renesas,hscif-r8a7793 # R-Car M2-N + - renesas,hscif-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-hscif # R-Car Gen2 and RZ/G1 + - const: renesas,hscif # generic HSCIF compatible UART + + - items: + - enum: + - renesas,hscif-r8a774a1 # RZ/G2M + - renesas,hscif-r8a774b1 # RZ/G2N + - renesas,hscif-r8a774c0 # RZ/G2E + - renesas,hscif-r8a7795 # R-Car H3 + - renesas,hscif-r8a7796 # R-Car M3-W + - renesas,hscif-r8a77961 # R-Car M3-W+ + - renesas,hscif-r8a77965 # R-Car M3-N + - renesas,hscif-r8a77970 # R-Car V3M + - renesas,hscif-r8a77980 # R-Car V3H + - renesas,hscif-r8a77990 # R-Car E3 + - renesas,hscif-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2 + - const: renesas,hscif # generic HSCIF compatible UART + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + items: + enum: + - fck # UART functional clock + - hsck # optional external clock input + - brg_int # optional internal clock source for BRG frequency divider + - scif_clk # optional external clock source for BRG frequency divider + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-hscif + - renesas,rcar-gen3-hscif +then: + required: + - resets + +examples: + - | + #include + #include + #include + aliases { + serial1 = &hscif1; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0xe6550000 96>; + interrupts = ; + clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 519>; + uart-has-rtscts; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt deleted file mode 100644 index 5816e7d739f6..000000000000 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ /dev/null @@ -1,150 +0,0 @@ -* Renesas SH-Mobile Serial Communication Interface - -Required properties: - - - compatible: Must contain one or more of the following: - - - "renesas,scif-r7s72100" for R7S72100 (RZ/A1H) SCIF compatible UART. - - "renesas,scif-r7s9210" for R7S9210 (RZ/A2) SCIF compatible UART. - - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART. - - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART. - - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART. - - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART. - - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART. - - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART. - - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART. - - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART. - - "renesas,scif-r8a7744" for R8A7744 (RZ/G1N) SCIF compatible UART. - - "renesas,scifa-r8a7744" for R8A7744 (RZ/G1N) SCIFA compatible UART. - - "renesas,scifb-r8a7744" for R8A7744 (RZ/G1N) SCIFB compatible UART. - - "renesas,hscif-r8a7744" for R8A7744 (RZ/G1N) HSCIF compatible UART. - - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART. - - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART. - - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART. - - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. - - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART. - - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART. - - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART. - - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART. - - "renesas,scif-r8a774b1" for R8A774B1 (RZ/G2N) SCIF compatible UART. - - "renesas,hscif-r8a774b1" for R8A774B1 (RZ/G2N) HSCIF compatible UART. - - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART. - - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART. - - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - - "renesas,hscif-r8a7778" for R8A7778 (R-Car M1) HSCIF compatible UART. - - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - - "renesas,hscif-r8a7779" for R8A7779 (R-Car H1) HSCIF compatible UART. - - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. - - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART. - - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART. - - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART. - - "renesas,scif-r8a7791" for R8A7791 (R-Car M2-W) SCIF compatible UART. - - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2-W) SCIFA compatible UART. - - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2-W) SCIFB compatible UART. - - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2-W) HSCIF compatible UART. - - "renesas,scif-r8a7792" for R8A7792 (R-Car V2H) SCIF compatible UART. - - "renesas,hscif-r8a7792" for R8A7792 (R-Car V2H) HSCIF compatible UART. - - "renesas,scif-r8a7793" for R8A7793 (R-Car M2-N) SCIF compatible UART. - - "renesas,scifa-r8a7793" for R8A7793 (R-Car M2-N) SCIFA compatible UART. - - "renesas,scifb-r8a7793" for R8A7793 (R-Car M2-N) SCIFB compatible UART. - - "renesas,hscif-r8a7793" for R8A7793 (R-Car M2-N) HSCIF compatible UART. - - "renesas,scif-r8a7794" for R8A7794 (R-Car E2) SCIF compatible UART. - - "renesas,scifa-r8a7794" for R8A7794 (R-Car E2) SCIFA compatible UART. - - "renesas,scifb-r8a7794" for R8A7794 (R-Car E2) SCIFB compatible UART. - - "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART. - - "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART. - - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. - - "renesas,scif-r8a7796" for R8A77960 (R-Car M3-W) SCIF compatible UART. - - "renesas,hscif-r8a7796" for R8A77960 (R-Car M3-W) HSCIF compatible UART. - - "renesas,scif-r8a77961" for R8A77961 (R-Car M3-W+) SCIF compatible UART. - - "renesas,hscif-r8a77961" for R8A77961 (R-Car M3-W+) HSCIF compatible UART. - - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART. - - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART. - - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART. - - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART. - - "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART. - - "renesas,hscif-r8a77980" for R8A77980 (R-Car V3H) HSCIF compatible UART. - - "renesas,scif-r8a77990" for R8A77990 (R-Car E3) SCIF compatible UART. - - "renesas,hscif-r8a77990" for R8A77990 (R-Car E3) HSCIF compatible UART. - - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART. - - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART. - - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. - - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. - - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART, - - "renesas,rcar-gen2-scif" for R-Car Gen2 and RZ/G1 SCIF compatible UART, - - "renesas,rcar-gen3-scif" for R-Car Gen3 and RZ/G2 SCIF compatible UART, - - "renesas,rcar-gen2-scifa" for R-Car Gen2 and RZ/G1 SCIFA compatible UART, - - "renesas,rcar-gen2-scifb" for R-Car Gen2 and RZ/G1 SCIFB compatible UART, - - "renesas,rcar-gen1-hscif" for R-Car Gen1 HSCIF compatible UART, - - "renesas,rcar-gen2-hscif" for R-Car Gen2 and RZ/G1 HSCIF compatible UART, - - "renesas,rcar-gen3-hscif" for R-Car Gen3 and RZ/G2 HSCIF compatible UART, - - "renesas,scif" for generic SCIF compatible UART. - - "renesas,scifa" for generic SCIFA compatible UART. - - "renesas,scifb" for generic SCIFB compatible UART. - - "renesas,hscif" for generic HSCIF compatible UART. - - "renesas,sci" for generic SCI compatible UART. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first, followed by the - family-specific and/or generic versions. - - - reg: Base address and length of the I/O registers used by the UART. - - interrupts: Must contain one or more interrupt-specifiers for the SCIx. - If a single interrupt is expressed, then all events are - multiplexed into this single interrupt. - - If multiple interrupts are provided by the hardware, the order - in which the interrupts are listed must match order below. Note - that some HW interrupt events may be muxed together resulting - in duplicate entries. - The interrupt order is as follows: - 1. Error (ERI) - 2. Receive buffer full (RXI) - 3. Transmit buffer empty (TXI) - 4. Break (BRI) - 5. Data Ready (DRI) - 6. Transmit End (TEI) - - - clocks: Must contain a phandle and clock-specifier pair for each entry - in clock-names. - - clock-names: Must contain "fck" for the SCIx UART functional clock. - Apart from the divided functional clock, there may be other possible - sources for the sampling clock, depending on SCIx variant. - On (H)SCI(F) and some SCIFA, an additional clock may be specified: - - "hsck" for the optional external clock input (on HSCIF), - - "sck" for the optional external clock input (on other variants). - On UARTs equipped with a Baud Rate Generator for External Clock (BRG) - (some SCIF and HSCIF), additional clocks may be specified: - - "brg_int" for the optional internal clock source for the frequency - divider (typically the (AXI or SHwy) bus clock), - - "scif_clk" for the optional external clock source for the frequency - divider (SCIF_CLK). - -Note: Each enabled SCIx UART may have an optional "serialN" alias in the -"aliases" node. - -Optional properties: - - dmas: Must contain a list of two references to DMA specifiers, one for - transmission, and one for reception. - - dma-names: Must contain a list of two DMA names, "tx" and "rx". - - {cts,dsr,dcd,rng,rts,dtr}-gpios: Specify GPIOs for modem lines, cfr. the - generic serial DT bindings in serial.yaml. - - uart-has-rtscts: Indicates dedicated lines for RTS/CTS hardware flow - control, cfr. the generic serial DT bindings in serial.yaml. - -Example: - aliases { - serial0 = &scifa0; - }; - - scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7790", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c40000 0 64>; - interrupt-parent = <&gic>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; - clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>; - dma-names = "tx", "rx"; - }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml new file mode 100644 index 000000000000..4183b7311f37 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,sci.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Serial Communication Interface + +maintainers: + - Geert Uytterhoeven + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: renesas,sci + + reg: + maxItems: 1 + + interrupts: + items: + - description: Error interrupt + - description: Receive buffer full interrupt + - description: Transmit buffer empty interrupt + - description: Transmit end interrupt + + interrupt-names: + items: + - const: eri + - const: rxi + - const: txi + - const: tei + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: + - fck # UART functional clock + - sck # optional external clock input + + uart-has-rtscts: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + aliases { + serial0 = &sci0; + }; + + sci0: serial@ffff78 { + compatible = "renesas,sci"; + reg = <0xffff78 8>; + interrupts = <88 0>, <89 0>, <90 0>, <91 0>; + clocks = <&fclk>; + clock-names = "fck"; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml new file mode 100644 index 000000000000..70392b9bd977 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,scif.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Serial Communication Interface with FIFO (SCIF) + +maintainers: + - Geert Uytterhoeven + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,scif-r7s72100 # RZ/A1H + - const: renesas,scif # generic SCIF compatible UART + + - items: + - enum: + - renesas,scif-r7s9210 # RZ/A2 + + - items: + - enum: + - renesas,scif-r8a7778 # R-Car M1 + - renesas,scif-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-scif # R-Car Gen1 + - const: renesas,scif # generic SCIF compatible UART + + - items: + - enum: + - renesas,scif-r8a7743 # RZ/G1M + - renesas,scif-r8a7744 # RZ/G1N + - renesas,scif-r8a7745 # RZ/G1E + - renesas,scif-r8a77470 # RZ/G1C + - renesas,scif-r8a7790 # R-Car H2 + - renesas,scif-r8a7791 # R-Car M2-W + - renesas,scif-r8a7792 # R-Car V2H + - renesas,scif-r8a7793 # R-Car M2-N + - renesas,scif-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-scif # R-Car Gen2 and RZ/G1 + - const: renesas,scif # generic SCIF compatible UART + + - items: + - enum: + - renesas,scif-r8a774a1 # RZ/G2M + - renesas,scif-r8a774b1 # RZ/G2N + - renesas,scif-r8a774c0 # RZ/G2E + - renesas,scif-r8a7795 # R-Car H3 + - renesas,scif-r8a7796 # R-Car M3-W + - renesas,scif-r8a77961 # R-Car M3-W+ + - renesas,scif-r8a77965 # R-Car M3-N + - renesas,scif-r8a77970 # R-Car V3M + - renesas,scif-r8a77980 # R-Car V3H + - renesas,scif-r8a77990 # R-Car E3 + - renesas,scif-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-scif # R-Car Gen3 and RZ/G2 + - const: renesas,scif # generic SCIF compatible UART + + reg: + maxItems: 1 + + interrupts: + oneOf: + - items: + - description: A combined interrupt + - items: + - description: Error interrupt + - description: Receive buffer full interrupt + - description: Transmit buffer empty interrupt + - description: Transmit End interrupt + - items: + - description: Error interrupt + - description: Receive buffer full interrupt + - description: Transmit buffer empty interrupt + - description: Break interrupt + - description: Data Ready interrupt + - description: Transmit End interrupt + + interrupt-names: + oneOf: + - items: + - const: eri + - const: rxi + - const: txi + - const: tei + - items: + - const: eri + - const: rxi + - const: txi + - const: bri + - const: dri + - const: tei + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + items: + enum: + - fck # UART functional clock + - sck # optional external clock input + - brg_int # optional internal clock source for BRG frequency divider + - scif_clk # optional external clock source for BRG frequency divider + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-scif + - renesas,rcar-gen3-scif +then: + required: + - resets + +examples: + - | + #include + #include + #include + aliases { + serial0 = &scif0; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; + reg = <0xe6e60000 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 721>; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml new file mode 100644 index 000000000000..b28bcb268854 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,scifa.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Serial Communications Interface with FIFO A (SCIFA) + +maintainers: + - Geert Uytterhoeven + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,scifa-r8a73a4 # R-Mobile APE6 + - renesas,scifa-r8a7740 # R-Mobile A1 + - renesas,scifa-sh73a0 # SH-Mobile AG5 + - const: renesas,scifa # generic SCIFA compatible UART + + - items: + - enum: + - renesas,scifa-r8a7743 # R8A7743 RZ/G1M + - renesas,scifa-r8a7744 # R8A7744 RZ/G1N + - renesas,scifa-r8a7745 # R8A7745 RZ/G1E + - renesas,scifa-r8a7790 # R8A7790 R-Car H2 + - renesas,scifa-r8a7791 # R8A7791 R-Car M2-W + - renesas,scifa-r8a7793 # R8A7793 R-Car M2-N + - renesas,scifa-r8a7794 # R8A7794 R-Car E2 + - const: renesas,rcar-gen2-scifa # R-Car Gen2 and RZ/G1 + - const: renesas,scifa # generic SCIFA compatible UART + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + enum: + - fck # UART functional clock + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-scifa +then: + required: + - resets + +examples: + - | + #include + #include + #include + aliases { + serial0 = &scifa0; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa", + "renesas,scifa"; + reg = <0xe6c40000 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 204>; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml new file mode 100644 index 000000000000..57205cb1dcd4 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,scifb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Serial Communications Interface with FIFO B (SCIFB) + +maintainers: + - Geert Uytterhoeven + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,scifb-r8a73a4 # R-Mobile APE6 + - renesas,scifb-r8a7740 # R-Mobile A1 + - renesas,scifb-sh73a0 # SH-Mobile AG5 + - const: renesas,scifb # generic SCIFB compatible UART + + - items: + - enum: + - renesas,scifb-r8a7743 # RZ/G1M + - renesas,scifb-r8a7744 # RZ/G1N + - renesas,scifb-r8a7745 # RZ/G1E + - renesas,scifb-r8a7790 # R-Car H2 + - renesas,scifb-r8a7791 # R-Car M2-W + - renesas,scifb-r8a7793 # R-Car M2-N + - renesas,scifb-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-scifb # R-Car Gen2 and RZ/G1 + - const: renesas,scifb # generic SCIFB compatible UART + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + enum: + - fck # UART functional clock + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-scifb +then: + required: + - resets + +examples: + - | + #include + #include + scifb: serial@e6c30000 { + compatible = "renesas,scifb-r8a7740", "renesas,scifb"; + reg = <0xe6c30000 0x100>; + interrupts = ; + clocks = <&mstp2_clks R8A7740_CLK_SCIFB>; + clock-names = "fck"; + power-domains = <&pd_a3sp>; + }; -- cgit v1.2.3 From 978e9c3ba0aa2213d0f9ec421f704f867b9ed142 Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Wed, 25 Mar 2020 13:13:35 +0100 Subject: dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml Current dts files for Rockchip with 'usb2-phy' subnodes are manually verified. In order to automate this process phy-rockchip-inno-usb2.txt has to be converted to yaml. Signed-off-by: Johan Jonker Signed-off-by: Rob Herring --- .../bindings/phy/phy-rockchip-inno-usb2.txt | 81 ----------- .../bindings/phy/phy-rockchip-inno-usb2.yaml | 155 +++++++++++++++++++++ 2 files changed, 155 insertions(+), 81 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt deleted file mode 100644 index 541f5298827c..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt +++ /dev/null @@ -1,81 +0,0 @@ -ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK - -Required properties (phy (parent) node): - - compatible : should be one of the listed compatibles: - * "rockchip,px30-usb2phy" - * "rockchip,rk3228-usb2phy" - * "rockchip,rk3328-usb2phy" - * "rockchip,rk3366-usb2phy" - * "rockchip,rk3399-usb2phy" - * "rockchip,rv1108-usb2phy" - - reg : the address offset of grf for usb-phy configuration. - - #clock-cells : should be 0. - - clock-output-names : specify the 480m output clock name. - -Optional properties: - - clocks : phandle + phy specifier pair, for the input clock of phy. - - clock-names : input clock name of phy, must be "phyclk". - - assigned-clocks : phandle of usb 480m clock. - - assigned-clock-parents : parent of usb 480m clock, select between - usb-phy output 480m and xin24m. - Refer to clk/clock-bindings.txt for generic clock - consumer properties. - - rockchip,usbgrf : phandle to the syscon managing the "usb general - register files". When set driver will request its - phandle as one companion-grf for some special SoCs - (e.g RV1108). - - extcon : phandle to the extcon device providing the cable state for - the otg phy. - -Required nodes : a sub-node is required for each port the phy provides. - The sub-node name is used to identify host or otg port, - and shall be the following entries: - * "otg-port" : the name of otg port. - * "host-port" : the name of host port. - -Required properties (port (child) node): - - #phy-cells : must be 0. See ./phy-bindings.txt for details. - - interrupts : specify an interrupt for each entry in interrupt-names. - - interrupt-names : a list which should be one of the following cases: - Regular case: - * "otg-id" : for the otg id interrupt. - * "otg-bvalid" : for the otg vbus interrupt. - * "linestate" : for the host/otg linestate interrupt. - Some SoCs use one interrupt with the above muxed together, so for these - * "otg-mux" : otg-port interrupt, which mux otg-id/otg-bvalid/linestate - to one. - -Optional properties: - - phy-supply : phandle to a regulator that provides power to VBUS. - See ./phy-bindings.txt for details. - -Example: - -grf: syscon@ff770000 { - compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - -... - - u2phy: usb2-phy@700 { - compatible = "rockchip,rk3366-usb2phy"; - reg = <0x700 0x2c>; - #clock-cells = <0>; - clock-output-names = "sclk_otgphy0_480m"; - - u2phy_otg: otg-port { - #phy-cells = <0>; - interrupts = , - , - ; - interrupt-names = "otg-id", "otg-bvalid", "linestate"; - }; - - u2phy_host: host-port { - #phy-cells = <0>; - interrupts = ; - interrupt-names = "linestate"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml new file mode 100644 index 000000000000..cb71561a21b4 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/phy-rockchip-inno-usb2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip USB2.0 phy with inno IP block + +maintainers: + - Heiko Stuebner + +properties: + compatible: + enum: + - rockchip,px30-usb2phy + - rockchip,rk3228-usb2phy + - rockchip,rk3328-usb2phy + - rockchip,rk3366-usb2phy + - rockchip,rk3399-usb2phy + - rockchip,rv1108-usb2phy + + reg: + maxItems: 1 + + clock-output-names: + description: + The usb 480m output clock name. + + "#clock-cells": + const: 0 + + "#phy-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + const: phyclk + + assigned-clocks: + description: + Phandle of the usb 480m clock. + + assigned-clock-parents: + description: + Parent of the usb 480m clock. + Select between usb-phy output 480m and xin24m. + Refer to clk/clock-bindings.txt for generic clock consumer properties. + + extcon: + description: + Phandle to the extcon device providing the cable state for the otg phy. + + rockchip,usbgrf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the 'usb general register files'. + When set the driver will request its phandle as one companion-grf + for some special SoCs (e.g rv1108). + + host-port: + type: object + additionalProperties: false + + properties: + "#phy-cells": + const: 0 + + interrupts: + description: host linestate interrupt + + interrupt-names: + const: linestate + + phy-supply: + description: + Phandle to a regulator that provides power to VBUS. + See ./phy-bindings.txt for details. + + required: + - "#phy-cells" + - interrupts + - interrupt-names + + otg-port: + type: object + additionalProperties: false + + properties: + "#phy-cells": + const: 0 + + interrupts: + minItems: 1 + maxItems: 3 + + interrupt-names: + oneOf: + - const: linestate + - const: otg-mux + - items: + - const: otg-bvalid + - const: otg-id + - const: linestate + + phy-supply: + description: + Phandle to a regulator that provides power to VBUS. + See ./phy-bindings.txt for details. + + required: + - "#phy-cells" + - interrupts + - interrupt-names + +required: + - compatible + - reg + - clock-output-names + - "#clock-cells" + - "#phy-cells" + - host-port + - otg-port + +additionalProperties: false + +examples: + - | + #include + #include + #include + u2phy0: usb2-phy@e450 { + compatible = "rockchip,rk3399-usb2phy"; + reg = <0xe450 0x10>; + clocks = <&cru SCLK_USB2PHY0_REF>; + clock-names = "phyclk"; + clock-output-names = "clk_usbphy0_480m"; + #clock-cells = <0>; + #phy-cells = <0>; + + u2phy0_host: host-port { + #phy-cells = <0>; + interrupts = ; + interrupt-names = "linestate"; + }; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = , + , + ; + interrupt-names = "otg-bvalid", "otg-id", "linestate"; + }; + }; -- cgit v1.2.3 From b203bb5f6219e84966889497e63f8a2cf8db7f0c Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 26 Mar 2020 11:56:25 +0100 Subject: dt-bindings: arm: Add some constraints for PSCI nodes There's no point allowing anything else but "psci" for the corresponding nodename of the PSCI node, so let's make this an explicit requirement. Moreover, let's also prevent additional properties, which also allows a better verification of the "patternProperties" bindings for subnodes. Signed-off-by: Ulf Hansson Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/psci.yaml | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 5e66934455bb..9247b58c26fc 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -32,6 +32,9 @@ description: |+ http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf properties: + $nodename: + const: psci + compatible: oneOf: - description: @@ -141,6 +144,8 @@ allOf: - cpu_off - cpu_on +additionalProperties: false + examples: - |+ -- cgit v1.2.3 From 8c0245602cfaf75cf2bf1ea194455b7bd38060f4 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 26 Mar 2020 11:56:26 +0100 Subject: dt-bindings: power: Fix example for power-domain The change that converted the domain-idle-states DT bindings to the json-schema, forgot to update the corresponding example for the power-domain binding. Let's fix it. Fixes: 3261227d136d ("dt-bindings: power: Convert domain-idle-states bindings to json-schema") Signed-off-by: Ulf Hansson Signed-off-by: Rob Herring --- .../devicetree/bindings/power/power-domain.yaml | 28 +++++++++++----------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index 6047aacd7766..ff5936e4a215 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -114,18 +114,18 @@ examples: domain-idle-states = <&DOMAIN_PWR_DN>; }; - DOMAIN_RET: state@0 { - compatible = "domain-idle-state"; - reg = <0x0 0x0>; - entry-latency-us = <1000>; - exit-latency-us = <2000>; - min-residency-us = <10000>; - }; - - DOMAIN_PWR_DN: state@1 { - compatible = "domain-idle-state"; - reg = <0x1 0x0>; - entry-latency-us = <5000>; - exit-latency-us = <8000>; - min-residency-us = <7000>; + domain-idle-states { + DOMAIN_RET: domain-retention { + compatible = "domain-idle-state"; + entry-latency-us = <1000>; + exit-latency-us = <2000>; + min-residency-us = <10000>; + }; + + DOMAIN_PWR_DN: domain-pwr-dn { + compatible = "domain-idle-state"; + entry-latency-us = <5000>; + exit-latency-us = <8000>; + min-residency-us = <7000>; + }; }; -- cgit v1.2.3 From b02a728ff348b047072ef9875547d90ed834cd99 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 27 Mar 2020 16:45:01 -0600 Subject: dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 'minItems' and 'maxItems' apply at the same level as 'items' schemas as the keywords apply to arrays. What's currently defined is a 3 dimensional matrix with the outer size being undefined. To fix this, minItems/maxItems needs to be moved up a level. With this fixed, the example fails validation. For matrix types, the dts syntax must use brackets (<>) matching the schema definition. In this case, the inner array size is 2 elements, so let's add the correct bracketing. Fixes: 3986a14870cb ("dt-bindings: iio: Add ltc2983 documentation") Cc: "Nuno Sá" Cc: Jonathan Cameron Cc: Hartmut Knaack Cc: Lars-Peter Clausen Cc: Peter Meerwald-Stadler Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring Acked-by: Nuno Sá Acked-by: Jonathan Cameron Signed-off-by: Rob Herring --- .../bindings/iio/temperature/adi,ltc2983.yaml | 38 ++++++++++------------ 1 file changed, 18 insertions(+), 20 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index acc030c1b20e..8fb46de6641d 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -123,12 +123,11 @@ patternProperties: sign. allOf: - $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 items: - minItems: 3 - maxItems: 64 - items: - minItems: 2 - maxItems: 2 + minItems: 2 + maxItems: 2 "^diode@": type: object @@ -328,12 +327,11 @@ patternProperties: 78 and 79. allOf: - $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 items: - minItems: 3 - maxItems: 64 - items: - minItems: 2 - maxItems: 2 + minItems: 2 + maxItems: 2 adi,custom-steinhart: description: @@ -465,16 +463,16 @@ examples: adi,sensor-type = <9>; //custom thermocouple adi,single-ended; adi,custom-thermocouple = /bits/ 64 - <(-50220000) 0 - (-30200000) 99100000 - (-5300000) 135400000 - 0 273150000 - 40200000 361200000 - 55300000 522100000 - 88300000 720300000 - 132200000 811200000 - 188700000 922500000 - 460400000 1000000000>; //10 pairs + <(-50220000) 0>, + <(-30200000) 99100000>, + <(-5300000) 135400000>, + <0 273150000>, + <40200000 361200000>, + <55300000 522100000>, + <88300000 720300000>, + <132200000 811200000>, + <188700000 922500000>, + <460400000 1000000000>; //10 pairs }; }; -- cgit v1.2.3 From 33b0cb370f97ebc5a722c2cf50821e8322267261 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 28 Mar 2020 01:41:57 +0100 Subject: dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" Use two spaces for indentation instead of one to be consistent with the rest of the file. No functional changes. Fixes: 6b9ebf1e0e678b ("dt-bindings: display: amlogic, meson-vpu: convert to yaml") Signed-off-by: Martin Blumenstingl Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml index d8e573eeb5ec..a8d202c9d004 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml @@ -71,9 +71,9 @@ properties: maxItems: 2 reg-names: - items: - - const: vpu - - const: hhi + items: + - const: vpu + - const: hhi interrupts: maxItems: 1 -- cgit v1.2.3 From 39eca91c7c2aec931a93b4df84a70e485e8b3542 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 30 Mar 2020 18:22:18 +0900 Subject: dt-bindings: uniphier-system-bus: fix warning in the example Fix the following warning from 'make dt_binding_check'. Warning (unit_address_vs_reg): /example-0/system-bus: node has a reg or ranges property, but no unit name Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../devicetree/bindings/bus/socionext,uniphier-system-bus.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml index ff9600d6de3b..c4c9119e4a20 100644 --- a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml +++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml @@ -72,7 +72,7 @@ examples: // - the UART device is connected at the offset 0x00200000 of CS5 and // mapped to 0x46200000 of the parent bus. - system-bus { + system-bus@58c00000 { compatible = "socionext,uniphier-system-bus"; reg = <0x58c00000 0x400>; #address-cells = <2>; -- cgit v1.2.3 From 28d5ee04d9f970ccf670b49dc4851a337ed90495 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Tue, 31 Mar 2020 10:37:29 +0200 Subject: dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb The amlogic,meson-gxbb-usb compatible needs snps,dwc2 aswell like other Amlogic SoC. Fixes: f3ca745d8a0e ("dt-bindings: usb: Convert DWC2 bindings to json-schema") Reviewed-by: Benjamin Gaignard Signed-off-by: Neil Armstrong Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/usb/dwc2.yaml | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index e95ba9373023..e638dcd79909 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -44,14 +44,11 @@ properties: - const: lantiq,arx100-usb - const: lantiq,xrx200-usb - items: - - const: amlogic,meson8-usb - - const: snps,dwc2 - - items: - - const: amlogic,meson8b-usb - - const: snps,dwc2 - - const: amlogic,meson-gxbb-usb - - items: - - const: amlogic,meson-g12a-usb + - enum: + - amlogic,meson8-usb + - amlogic,meson8b-usb + - amlogic,meson-gxbb-usb + - amlogic,meson-g12a-usb - const: snps,dwc2 - const: amcc,dwc-otg - const: snps,dwc2 -- cgit v1.2.3