From 765692078f08d0229e545d3c1a50bddbc16c800c Mon Sep 17 00:00:00 2001
From: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Date: Thu, 9 Oct 2014 08:53:35 +0200
Subject: drm: sti: remove gpio for HDMI hot plug detection

gpio used for HDMI hot plug detection is useless,
HDMI_STI register contains an hot plug detection status bit.
Fix binding documentation.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
---
 Documentation/devicetree/bindings/gpu/st,stih4xx.txt | 2 --
 1 file changed, 2 deletions(-)

(limited to 'Documentation/devicetree')

diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
index 8885d9e203fc..32cfc7b7631b 100644
--- a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
+++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
@@ -68,7 +68,6 @@ STMicroelectronics stih4xx platforms
     number of clocks may depend of the SoC type.
   - clock-names: names of the clocks listed in clocks property in the same
     order.
-  - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not.
   - ddc: phandle of an I2C controller used for DDC EDID probing
 
 sti-hda:
@@ -174,7 +173,6 @@ Example:
 				interrupt-names	= "irq";
 				clock-names	= "pix", "tmds", "phy", "audio";
 				clocks          = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
-				hdmi,hpd-gpio	= <&PIO2 5>;
 			};
 
 			sti-hda@fe85a000 {
-- 
cgit v1.2.3