From 058ad7b6aa5204d3af878415c7b946748ab34f7a Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Thu, 4 Oct 2018 09:53:10 +0100 Subject: dt-bindings: arm: Fix RZ/G2E part number Fix RZ/G2E part number from its description. Signed-off-by: Fabrizio Castro Reviewed-by: Biju Das Reviewed-by: Rob Herring Signed-off-by: Simon Horman --- Documentation/devicetree/bindings/arm/shmobile.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index f5e0f82fd503..58c4256d37a3 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -27,7 +27,7 @@ SoCs: compatible = "renesas,r8a77470" - RZ/G2M (R8A774A1) compatible = "renesas,r8a774a1" - - RZ/G2E (RA8774C0) + - RZ/G2E (R8A774C0) compatible = "renesas,r8a774c0" - R-Car M1A (R8A77781) compatible = "renesas,r8a7778" -- cgit v1.2.3 From aeaf6a4b2d9ed4373e39a64c1c10cb1d93dd6bd1 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 7 Nov 2018 17:40:58 +0000 Subject: dt-bindings: cpufreq: remove stale arm_big_little_dt entry Most of the ARM platforms used v2 OPP bindings to support big-little configurations. This arm_big_little_dt binding is incomplete and was never used. Commit f174e49e4906 (cpufreq: remove unused arm_big_little_dt driver) removed the driver supporting this binding, but the binding was left unnoticed, so let's get rid of it now. Fixes: f174e49e4906 (cpufreq: remove unused arm_big_little_dt driver) Signed-off-by: Sudeep Holla Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- .../bindings/cpufreq/arm_big_little_dt.txt | 65 ---------------------- 1 file changed, 65 deletions(-) delete mode 100644 Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt deleted file mode 100644 index 2aa06ac0fac5..000000000000 --- a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt +++ /dev/null @@ -1,65 +0,0 @@ -Generic ARM big LITTLE cpufreq driver's DT glue ------------------------------------------------ - -This is DT specific glue layer for generic cpufreq driver for big LITTLE -systems. - -Both required and optional properties listed below must be defined -under node /cpus/cpu@x. Where x is the first cpu inside a cluster. - -FIXME: Cpus should boot in the order specified in DT and all cpus for a cluster -must be present contiguously. Generic DT driver will check only node 'x' for -cpu:x. - -Required properties: -- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt - for details - -Optional properties: -- clock-latency: Specify the possible maximum transition latency for clock, - in unit of nanoseconds. - -Examples: - -cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a15"; - reg = <0>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 1100000 - 396000 950000 - 198000 850000 - >; - clock-latency = <61036>; /* two CLK32 periods */ - }; - - cpu@1 { - compatible = "arm,cortex-a15"; - reg = <1>; - next-level-cache = <&L2>; - }; - - cpu@100 { - compatible = "arm,cortex-a7"; - reg = <100>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 950000 - 396000 750000 - 198000 450000 - >; - clock-latency = <61036>; /* two CLK32 periods */ - }; - - cpu@101 { - compatible = "arm,cortex-a7"; - reg = <101>; - next-level-cache = <&L2>; - }; -}; -- cgit v1.2.3 From 4f145f14f6b98b5aa0dd91bdae518b3f24f74b37 Mon Sep 17 00:00:00 2001 From: Eugeniu Rosca Date: Mon, 20 Aug 2018 16:49:10 +0200 Subject: dt-bindings: can: rcar_can: document r8a77965 support Document the support for rcar_can on R8A77965 SoC devices. Add R8A77965 to the list of SoCs which require the "assigned-clocks" and "assigned-clock-rates" properties (thanks, Sergei). Signed-off-by: Eugeniu Rosca Reviewed-by: Simon Horman Reviewed-by: Kieran Bingham Reviewed-by: Rob Herring Signed-off-by: Marc Kleine-Budde --- Documentation/devicetree/bindings/net/can/rcar_can.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index cc4372842bf3..47fc68148f38 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -14,6 +14,7 @@ Required properties: "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC. "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. + "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC. "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 compatible device. @@ -29,11 +30,10 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". -Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796" -compatible: -In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock -and can be used by both CAN and CAN FD controller at the same time. It needs to -be scaled to maximum frequency if any of these controllers use it. This is done +Required properties for R8A7795, R8A7796 and R8A77965: +For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can +be used by both CAN and CAN FD controller at the same time. It needs to be +scaled to maximum frequency if any of these controllers use it. This is done using the below properties: - assigned-clocks: phandle of clkp2(CANFD) clock. -- cgit v1.2.3 From 868b7c0f43e61f227bf3d7f7d6134bb3c67bb0e8 Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Mon, 10 Sep 2018 11:43:14 +0100 Subject: dt-bindings: can: rcar_can: Add r8a774a1 support Document RZ/G2M (r8a774a1) SoC specific bindings. Signed-off-by: Fabrizio Castro Signed-off-by: Chris Paterson Reviewed-by: Biju Das Reviewed-by: Rob Herring Reviewed-by: Simon Horman Signed-off-by: Marc Kleine-Budde --- Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index 47fc68148f38..9936b9ee67c3 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -5,6 +5,7 @@ Required properties: - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC. "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. + "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC. "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. @@ -18,15 +19,21 @@ Required properties: "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 compatible device. - "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device. + "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2 + compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first followed by the generic version. - reg: physical base address and size of the R-Car CAN register map. - interrupts: interrupt specifier for the sole interrupt. -- clocks: phandles and clock specifiers for 3 CAN clock inputs. -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk". +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2 + devices. + phandles and clock specifiers for 3 CAN clock inputs for every other + SoC. +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk". + 3 clock input name strings for every other SoC: "clkp1", "clkp2", + "can_clk". - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". @@ -42,8 +49,9 @@ using the below properties: Optional properties: - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are: <0x0> (default) : Peripheral clock (clkp1) - <0x1> : Peripheral clock (clkp2) - <0x3> : Externally input clock + <0x1> : Peripheral clock (clkp2) (not supported by + RZ/G2 devices) + <0x3> : External input clock Example ------- -- cgit v1.2.3 From f164d0204b1156a7e0d8d1622c1a8d25752befec Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sat, 27 Oct 2018 10:36:54 +0200 Subject: can: hi311x: Use level-triggered interrupt If the hi3110 shares the SPI bus with another traffic-intensive device and packets are received in high volume (by a separate machine sending with "cangen -g 0 -i -x"), reception stops after a few minutes and the counter in /proc/interrupts stops incrementing. Bus state is "active". Bringing the interface down and back up reconvenes the reception. The issue is not observed when the hi3110 is the sole device on the SPI bus. Using a level-triggered interrupt makes the issue go away and lets the hi3110 successfully receive 2 GByte over the course of 5 days while a ks8851 Ethernet chip on the same SPI bus handles 6 GByte of traffic. Unfortunately the hi3110 datasheet is mum on the trigger type. The pin description on page 3 only specifies the polarity (active high): http://www.holtic.com/documents/371-hi-3110_v-rev-kpdf.do Cc: Mathias Duckeck Cc: Akshay Bhat Cc: Casey Fitzpatrick Signed-off-by: Lukas Wunner Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- Documentation/devicetree/bindings/net/can/holt_hi311x.txt | 2 +- drivers/net/can/spi/hi311x.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt index 903a78da65be..3a9926f99937 100644 --- a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt +++ b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt @@ -17,7 +17,7 @@ Example: reg = <1>; clocks = <&clk32m>; interrupt-parent = <&gpio4>; - interrupts = <13 IRQ_TYPE_EDGE_RISING>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; vdd-supply = <®5v0>; xceiver-supply = <®5v0>; }; diff --git a/drivers/net/can/spi/hi311x.c b/drivers/net/can/spi/hi311x.c index 53e320c92a8b..ddaf46239e39 100644 --- a/drivers/net/can/spi/hi311x.c +++ b/drivers/net/can/spi/hi311x.c @@ -760,7 +760,7 @@ static int hi3110_open(struct net_device *net) { struct hi3110_priv *priv = netdev_priv(net); struct spi_device *spi = priv->spi; - unsigned long flags = IRQF_ONESHOT | IRQF_TRIGGER_RISING; + unsigned long flags = IRQF_ONESHOT | IRQF_TRIGGER_HIGH; int ret; ret = open_candev(net); -- cgit v1.2.3 From ab214c48387aaaadcf8246b4b00d8b78286fde1b Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Fri, 9 Nov 2018 16:44:10 +0530 Subject: dt-bindings: i2c: omap: Add new compatible for AM654 SoCs AM654 SoCs have same I2C IP as OMAP SoCs. Add new compatible to handle AM654 SoCs. While at that reformat the existing compatible list for older SoCs to list one valid compatible per line. Signed-off-by: Vignesh R Reviewed-by: Rob Herring Reviewed-by: Grygorii Strashko Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c-omap.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/i2c/i2c-omap.txt b/Documentation/devicetree/bindings/i2c/i2c-omap.txt index 7e49839d4124..4b90ba9f31b7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-omap.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-omap.txt @@ -1,8 +1,12 @@ I2C for OMAP platforms Required properties : -- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c" - or "ti,omap4-i2c" +- compatible : Must be + "ti,omap2420-i2c" for OMAP2420 SoCs + "ti,omap2430-i2c" for OMAP2430 SoCs + "ti,omap3-i2c" for OMAP3 SoCs + "ti,omap4-i2c" for OMAP4+ SoCs + "ti,am654-i2c", "ti,omap4-i2c" for AM654 SoCs - ti,hwmods : Must be "i2c", n being the instance number (1-based) - #address-cells = <1>; - #size-cells = <0>; -- cgit v1.2.3 From aab2b5297668e86504d730bbc6c33f7b69023812 Mon Sep 17 00:00:00 2001 From: Fabrizio Castro Date: Fri, 21 Sep 2018 19:08:27 +0100 Subject: dt-bindings: display: renesas: du: Document the r8a77470 bindings Document the RZ/G1C (r8a77470) SoC in R-Car DU bindings. Signed-off-by: Fabrizio Castro Reviewed-by: Biju Das Reviewed-by: Rob Herring Reviewed-by: Laurent Pinchart Signed-off-by: Laurent Pinchart --- Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index 9de67be632d1..eaa34ef517a6 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -5,6 +5,7 @@ Required Properties: - compatible: must be one of the following. - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU + - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU @@ -53,6 +54,7 @@ corresponding to each DU output. ----------------------------------------------------------------------------- R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - + R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - -- cgit v1.2.3 From 5eb08d995564c9f9d4818a84050f7716b73c86cc Mon Sep 17 00:00:00 2001 From: Biju Das Date: Fri, 21 Sep 2018 19:08:28 +0100 Subject: dt-bindings: display: renesas: du: Document the r8a7744 bindings Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings. Signed-off-by: Biju Das Reviewed-by: Fabrizio Castro Reviewed-by: Rob Herring Reviewed-by: Laurent Pinchart Signed-off-by: Laurent Pinchart --- Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index eaa34ef517a6..3c855d9f2719 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -4,6 +4,7 @@ Required Properties: - compatible: must be one of the following. - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU + - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU @@ -53,6 +54,7 @@ corresponding to each DU output. Port0 Port1 Port2 Port3 ----------------------------------------------------------------------------- R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - - + R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - -- cgit v1.2.3 From 828ff2adaac405a1a3a10ccf6b04e7ca3de59967 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 18 Oct 2018 02:56:18 +0300 Subject: dt-bindings: display: renesas: lvds: Document r8a77965 bindings The M3-N (r8a77965) includes one LVDS encoder. Extend the binding to support it. Signed-off-by: Laurent Pinchart Reviewed-by: Kieran Bingham --- Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt index 3aeb0ec06fd0..ba5469dd09f3 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt @@ -13,6 +13,7 @@ Required properties: - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders + - "renesas,r8a77965-lvds" for R8A77965 (R-Car M3-N) compatible LVDS encoders - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders - "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders - "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders -- cgit v1.2.3 From e7b9fb4f545b1f7885e7c642643828f93d3d79c9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 23 Nov 2018 15:46:50 -0200 Subject: dt-bindings: dsa: Fix typo in "probed" The correct form is "can be probed", so fix the typo. Signed-off-by: Fabio Estevam Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/dsa/dsa.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index 3ceeb8de1196..35694c0c376b 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -7,7 +7,7 @@ limitations. Current Binding --------------- -Switches are true Linux devices and can be probes by any means. Once +Switches are true Linux devices and can be probed by any means. Once probed, they register to the DSA framework, passing a node pointer. This node is expected to fulfil the following binding, and may contain additional properties as required by the device it is -- cgit v1.2.3