From d8a4fb0e60c613d85eda57fd1701177ae2f1c6b5 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Mon, 3 Mar 2014 11:36:41 +0900 Subject: mmc: dw_mmc: use the mmc_of_parse() instead of local parser mmc_of_parse() have been already parsed the general capability. Didn't need to use the local parser. Signed-off-by: Jaehoon Chung Acked-by: Seungwon Jeon Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 5 ----- 1 file changed, 5 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 8f3f13315358..2d4a7258a10d 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -69,10 +69,6 @@ Optional properties: * supports-highspeed: Enables support for high speed cards (up to 50MHz) -* caps2-mmc-hs200-1_8v: Supports mmc HS200 SDR 1.8V mode - -* caps2-mmc-hs200-1_2v: Supports mmc HS200 SDR 1.2V mode - * broken-cd: as documented in mmc core bindings. * vmmc-supply: The phandle to the regulator to use for vmmc. If this is @@ -103,7 +99,6 @@ board specific portions as listed below. clock-freq-min-max = <400000 200000000>; num-slots = <1>; supports-highspeed; - caps2-mmc-hs200-1_8v; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; -- cgit v1.2.3 From 1b66e94e6b9995323190f31c51d8e1a6f516627e Mon Sep 17 00:00:00 2001 From: Jonas Jensen Date: Wed, 9 Apr 2014 15:54:11 +0200 Subject: mmc: moxart: Add MOXA ART SD/MMC driver Add SD/MMC driver for MOXA ART SoCs. The "MOXA ART MMC controller" is likely a faraday "ftsdc010", a controller with support in U-Boot: http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/mmc/ftsdc010_mci.c Signed-off-by: Jonas Jensen Acked-by: Arnd Bergmann Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- .../devicetree/bindings/mmc/moxa,moxart-mmc.txt | 30 + drivers/mmc/host/Kconfig | 9 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/moxart-mmc.c | 730 +++++++++++++++++++++ 4 files changed, 770 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt create mode 100644 drivers/mmc/host/moxart-mmc.c (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt new file mode 100644 index 000000000000..b63819149f22 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt @@ -0,0 +1,30 @@ +MOXA ART MMC Host Controller Interface + + Inherits from mmc binding[1]. + + [1] Documentation/devicetree/bindings/mmc/mmc.txt + +Required properties: + +- compatible : Must be "moxa,moxart-mmc" or "faraday,ftsdc010" +- reg : Should contain registers location and length +- interrupts : Should contain the interrupt number +- clocks : Should contain phandle for the clock feeding the MMC controller + +Optional properties: + +- dmas : Should contain two DMA channels, line request number must be 5 for + both channels +- dma-names : Must be "tx", "rx" + +Example: + + mmc: mmc@98e00000 { + compatible = "moxa,moxart-mmc"; + reg = <0x98e00000 0x5C>; + interrupts = <5 0>; + clocks = <&clk_apb>; + dmas = <&dma 5>, + <&dma 5>; + dma-names = "tx", "rx"; + }; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index b675882307e4..fd4aab9b79e2 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -283,6 +283,15 @@ config MMC_SDHCI_BCM2835 If unsure, say N. +config MMC_MOXART + tristate "MOXART SD/MMC Host Controller support" + depends on ARCH_MOXART && MMC + help + This selects support for the MOXART SD/MMC Host Controller. + MOXA provides one multi-functional card reader which can + be found on some embedded hardware such as UC-7112-LX. + If you have a controller with this interface, say Y here. + config MMC_OMAP tristate "TI OMAP Multimedia Card Interface support" depends on ARCH_OMAP diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 3eb48b656f25..997912262499 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o obj-$(CONFIG_MMC_VUB300) += vub300.o obj-$(CONFIG_MMC_USHC) += ushc.o obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o +obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c new file mode 100644 index 000000000000..74924a04026e --- /dev/null +++ b/drivers/mmc/host/moxart-mmc.c @@ -0,0 +1,730 @@ +/* + * MOXA ART MMC host driver. + * + * Copyright (C) 2014 Jonas Jensen + * + * Jonas Jensen + * + * Based on code from + * Moxa Technologies Co., Ltd. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_COMMAND 0 +#define REG_ARGUMENT 4 +#define REG_RESPONSE0 8 +#define REG_RESPONSE1 12 +#define REG_RESPONSE2 16 +#define REG_RESPONSE3 20 +#define REG_RESPONSE_COMMAND 24 +#define REG_DATA_CONTROL 28 +#define REG_DATA_TIMER 32 +#define REG_DATA_LENGTH 36 +#define REG_STATUS 40 +#define REG_CLEAR 44 +#define REG_INTERRUPT_MASK 48 +#define REG_POWER_CONTROL 52 +#define REG_CLOCK_CONTROL 56 +#define REG_BUS_WIDTH 60 +#define REG_DATA_WINDOW 64 +#define REG_FEATURE 68 +#define REG_REVISION 72 + +/* REG_COMMAND */ +#define CMD_SDC_RESET BIT(10) +#define CMD_EN BIT(9) +#define CMD_APP_CMD BIT(8) +#define CMD_LONG_RSP BIT(7) +#define CMD_NEED_RSP BIT(6) +#define CMD_IDX_MASK 0x3f + +/* REG_RESPONSE_COMMAND */ +#define RSP_CMD_APP BIT(6) +#define RSP_CMD_IDX_MASK 0x3f + +/* REG_DATA_CONTROL */ +#define DCR_DATA_FIFO_RESET BIT(8) +#define DCR_DATA_THRES BIT(7) +#define DCR_DATA_EN BIT(6) +#define DCR_DMA_EN BIT(5) +#define DCR_DATA_WRITE BIT(4) +#define DCR_BLK_SIZE 0x0f + +/* REG_DATA_LENGTH */ +#define DATA_LEN_MASK 0xffffff + +/* REG_STATUS */ +#define WRITE_PROT BIT(12) +#define CARD_DETECT BIT(11) +/* 1-10 below can be sent to either registers, interrupt or clear. */ +#define CARD_CHANGE BIT(10) +#define FIFO_ORUN BIT(9) +#define FIFO_URUN BIT(8) +#define DATA_END BIT(7) +#define CMD_SENT BIT(6) +#define DATA_CRC_OK BIT(5) +#define RSP_CRC_OK BIT(4) +#define DATA_TIMEOUT BIT(3) +#define RSP_TIMEOUT BIT(2) +#define DATA_CRC_FAIL BIT(1) +#define RSP_CRC_FAIL BIT(0) + +#define MASK_RSP (RSP_TIMEOUT | RSP_CRC_FAIL | \ + RSP_CRC_OK | CARD_DETECT | CMD_SENT) + +#define MASK_DATA (DATA_CRC_OK | DATA_END | \ + DATA_CRC_FAIL | DATA_TIMEOUT) + +#define MASK_INTR_PIO (FIFO_URUN | FIFO_ORUN | CARD_CHANGE) + +/* REG_POWER_CONTROL */ +#define SD_POWER_ON BIT(4) +#define SD_POWER_MASK 0x0f + +/* REG_CLOCK_CONTROL */ +#define CLK_HISPD BIT(9) +#define CLK_OFF BIT(8) +#define CLK_SD BIT(7) +#define CLK_DIV_MASK 0x7f + +/* REG_BUS_WIDTH */ +#define BUS_WIDTH_8 BIT(2) +#define BUS_WIDTH_4 BIT(1) +#define BUS_WIDTH_1 BIT(0) + +#define MMC_VDD_360 23 +#define MIN_POWER (MMC_VDD_360 - SD_POWER_MASK) +#define MAX_RETRIES 500000 + +struct moxart_host { + spinlock_t lock; + + void __iomem *base; + + phys_addr_t reg_phys; + + struct dma_chan *dma_chan_tx; + struct dma_chan *dma_chan_rx; + struct dma_async_tx_descriptor *tx_desc; + struct mmc_host *mmc; + struct mmc_request *mrq; + struct scatterlist *cur_sg; + struct completion dma_complete; + struct completion pio_complete; + + u32 num_sg; + u32 data_remain; + u32 data_len; + u32 fifo_width; + u32 timeout; + u32 rate; + + long sysclk; + + bool have_dma; + bool is_removed; +}; + +static inline void moxart_init_sg(struct moxart_host *host, + struct mmc_data *data) +{ + host->cur_sg = data->sg; + host->num_sg = data->sg_len; + host->data_remain = host->cur_sg->length; + + if (host->data_remain > host->data_len) + host->data_remain = host->data_len; +} + +static inline int moxart_next_sg(struct moxart_host *host) +{ + int remain; + struct mmc_data *data = host->mrq->cmd->data; + + host->cur_sg++; + host->num_sg--; + + if (host->num_sg > 0) { + host->data_remain = host->cur_sg->length; + remain = host->data_len - data->bytes_xfered; + if (remain > 0 && remain < host->data_remain) + host->data_remain = remain; + } + + return host->num_sg; +} + +static int moxart_wait_for_status(struct moxart_host *host, + u32 mask, u32 *status) +{ + int ret = -ETIMEDOUT; + u32 i; + + for (i = 0; i < MAX_RETRIES; i++) { + *status = readl(host->base + REG_STATUS); + if (!(*status & mask)) { + udelay(5); + continue; + } + writel(*status & mask, host->base + REG_CLEAR); + ret = 0; + break; + } + + if (ret) + dev_err(mmc_dev(host->mmc), "timed out waiting for status\n"); + + return ret; +} + + +static void moxart_send_command(struct moxart_host *host, + struct mmc_command *cmd) +{ + u32 status, cmdctrl; + + writel(RSP_TIMEOUT | RSP_CRC_OK | + RSP_CRC_FAIL | CMD_SENT, host->base + REG_CLEAR); + writel(cmd->arg, host->base + REG_ARGUMENT); + + cmdctrl = cmd->opcode & CMD_IDX_MASK; + if (cmdctrl == SD_APP_SET_BUS_WIDTH || cmdctrl == SD_APP_OP_COND || + cmdctrl == SD_APP_SEND_SCR || cmdctrl == SD_APP_SD_STATUS || + cmdctrl == SD_APP_SEND_NUM_WR_BLKS) + cmdctrl |= CMD_APP_CMD; + + if (cmd->flags & MMC_RSP_PRESENT) + cmdctrl |= CMD_NEED_RSP; + + if (cmd->flags & MMC_RSP_136) + cmdctrl |= CMD_LONG_RSP; + + writel(cmdctrl | CMD_EN, host->base + REG_COMMAND); + + if (moxart_wait_for_status(host, MASK_RSP, &status) == -ETIMEDOUT) + cmd->error = -ETIMEDOUT; + + if (status & RSP_TIMEOUT) { + cmd->error = -ETIMEDOUT; + return; + } + if (status & RSP_CRC_FAIL) { + cmd->error = -EIO; + return; + } + if (status & RSP_CRC_OK) { + if (cmd->flags & MMC_RSP_136) { + cmd->resp[3] = readl(host->base + REG_RESPONSE0); + cmd->resp[2] = readl(host->base + REG_RESPONSE1); + cmd->resp[1] = readl(host->base + REG_RESPONSE2); + cmd->resp[0] = readl(host->base + REG_RESPONSE3); + } else { + cmd->resp[0] = readl(host->base + REG_RESPONSE0); + } + } +} + +static void moxart_dma_complete(void *param) +{ + struct moxart_host *host = param; + + complete(&host->dma_complete); +} + +static void moxart_transfer_dma(struct mmc_data *data, struct moxart_host *host) +{ + u32 len, dir_data, dir_slave; + unsigned long dma_time; + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *dma_chan; + + if (host->data_len == data->bytes_xfered) + return; + + if (data->flags & MMC_DATA_WRITE) { + dma_chan = host->dma_chan_tx; + dir_data = DMA_TO_DEVICE; + dir_slave = DMA_MEM_TO_DEV; + } else { + dma_chan = host->dma_chan_rx; + dir_data = DMA_FROM_DEVICE; + dir_slave = DMA_DEV_TO_MEM; + } + + len = dma_map_sg(dma_chan->device->dev, data->sg, + data->sg_len, dir_data); + + if (len > 0) { + desc = dmaengine_prep_slave_sg(dma_chan, data->sg, + len, dir_slave, + DMA_PREP_INTERRUPT | + DMA_CTRL_ACK); + } else { + dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n"); + } + + if (desc) { + host->tx_desc = desc; + desc->callback = moxart_dma_complete; + desc->callback_param = host; + dmaengine_submit(desc); + dma_async_issue_pending(dma_chan); + } + + data->bytes_xfered += host->data_remain; + + dma_time = wait_for_completion_interruptible_timeout( + &host->dma_complete, host->timeout); + + dma_unmap_sg(dma_chan->device->dev, + data->sg, data->sg_len, + dir_data); +} + + +static void moxart_transfer_pio(struct moxart_host *host) +{ + struct mmc_data *data = host->mrq->cmd->data; + u32 *sgp, len = 0, remain, status; + + if (host->data_len == data->bytes_xfered) + return; + + sgp = sg_virt(host->cur_sg); + remain = host->data_remain; + + if (data->flags & MMC_DATA_WRITE) { + while (remain > 0) { + if (moxart_wait_for_status(host, FIFO_URUN, &status) + == -ETIMEDOUT) { + data->error = -ETIMEDOUT; + complete(&host->pio_complete); + return; + } + for (len = 0; len < remain && len < host->fifo_width;) { + iowrite32(*sgp, host->base + REG_DATA_WINDOW); + sgp++; + len += 4; + } + remain -= len; + } + + } else { + while (remain > 0) { + if (moxart_wait_for_status(host, FIFO_ORUN, &status) + == -ETIMEDOUT) { + data->error = -ETIMEDOUT; + complete(&host->pio_complete); + return; + } + for (len = 0; len < remain && len < host->fifo_width;) { + /* SCR data must be read in big endian. */ + if (data->mrq->cmd->opcode == SD_APP_SEND_SCR) + *sgp = ioread32be(host->base + + REG_DATA_WINDOW); + else + *sgp = ioread32(host->base + + REG_DATA_WINDOW); + sgp++; + len += 4; + } + remain -= len; + } + } + + data->bytes_xfered += host->data_remain - remain; + host->data_remain = remain; + + if (host->data_len != data->bytes_xfered) + moxart_next_sg(host); + else + complete(&host->pio_complete); +} + +static void moxart_prepare_data(struct moxart_host *host) +{ + struct mmc_data *data = host->mrq->cmd->data; + u32 datactrl; + int blksz_bits; + + if (!data) + return; + + host->data_len = data->blocks * data->blksz; + blksz_bits = ffs(data->blksz) - 1; + BUG_ON(1 << blksz_bits != data->blksz); + + moxart_init_sg(host, data); + + datactrl = DCR_DATA_EN | (blksz_bits & DCR_BLK_SIZE); + + if (data->flags & MMC_DATA_WRITE) + datactrl |= DCR_DATA_WRITE; + + if ((host->data_len > host->fifo_width) && host->have_dma) + datactrl |= DCR_DMA_EN; + + writel(DCR_DATA_FIFO_RESET, host->base + REG_DATA_CONTROL); + writel(MASK_DATA | FIFO_URUN | FIFO_ORUN, host->base + REG_CLEAR); + writel(host->rate, host->base + REG_DATA_TIMER); + writel(host->data_len, host->base + REG_DATA_LENGTH); + writel(datactrl, host->base + REG_DATA_CONTROL); +} + +static void moxart_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct moxart_host *host = mmc_priv(mmc); + unsigned long pio_time, flags; + u32 status; + + spin_lock_irqsave(&host->lock, flags); + + init_completion(&host->dma_complete); + init_completion(&host->pio_complete); + + host->mrq = mrq; + + if (readl(host->base + REG_STATUS) & CARD_DETECT) { + mrq->cmd->error = -ETIMEDOUT; + goto request_done; + } + + moxart_prepare_data(host); + moxart_send_command(host, host->mrq->cmd); + + if (mrq->cmd->data) { + if ((host->data_len > host->fifo_width) && host->have_dma) { + + writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK); + + spin_unlock_irqrestore(&host->lock, flags); + + moxart_transfer_dma(mrq->cmd->data, host); + + spin_lock_irqsave(&host->lock, flags); + } else { + + writel(MASK_INTR_PIO, host->base + REG_INTERRUPT_MASK); + + spin_unlock_irqrestore(&host->lock, flags); + + /* PIO transfers start from interrupt. */ + pio_time = wait_for_completion_interruptible_timeout( + &host->pio_complete, host->timeout); + + spin_lock_irqsave(&host->lock, flags); + } + + if (host->is_removed) { + dev_err(mmc_dev(host->mmc), "card removed\n"); + mrq->cmd->error = -ETIMEDOUT; + goto request_done; + } + + if (moxart_wait_for_status(host, MASK_DATA, &status) + == -ETIMEDOUT) { + mrq->cmd->data->error = -ETIMEDOUT; + goto request_done; + } + + if (status & DATA_CRC_FAIL) + mrq->cmd->data->error = -ETIMEDOUT; + + if (mrq->cmd->data->stop) + moxart_send_command(host, mrq->cmd->data->stop); + } + +request_done: + spin_unlock_irqrestore(&host->lock, flags); + mmc_request_done(host->mmc, mrq); +} + +static irqreturn_t moxart_irq(int irq, void *devid) +{ + struct moxart_host *host = (struct moxart_host *)devid; + u32 status; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + status = readl(host->base + REG_STATUS); + if (status & CARD_CHANGE) { + host->is_removed = status & CARD_DETECT; + if (host->is_removed && host->have_dma) { + dmaengine_terminate_all(host->dma_chan_tx); + dmaengine_terminate_all(host->dma_chan_rx); + } + host->mrq = NULL; + writel(MASK_INTR_PIO, host->base + REG_CLEAR); + writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK); + mmc_detect_change(host->mmc, 0); + } + if (status & (FIFO_ORUN | FIFO_URUN) && host->mrq) + moxart_transfer_pio(host); + + spin_unlock_irqrestore(&host->lock, flags); + + return IRQ_HANDLED; +} + +static void moxart_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct moxart_host *host = mmc_priv(mmc); + unsigned long flags; + u8 power, div; + u32 ctrl; + + spin_lock_irqsave(&host->lock, flags); + + if (ios->clock) { + for (div = 0; div < CLK_DIV_MASK; ++div) { + if (ios->clock >= host->sysclk / (2 * (div + 1))) + break; + } + ctrl = CLK_SD | div; + host->rate = host->sysclk / (2 * (div + 1)); + if (host->rate > host->sysclk) + ctrl |= CLK_HISPD; + writel(ctrl, host->base + REG_CLOCK_CONTROL); + } + + if (ios->power_mode == MMC_POWER_OFF) { + writel(readl(host->base + REG_POWER_CONTROL) & ~SD_POWER_ON, + host->base + REG_POWER_CONTROL); + } else { + if (ios->vdd < MIN_POWER) + power = 0; + else + power = ios->vdd - MIN_POWER; + + writel(SD_POWER_ON | (u32) power, + host->base + REG_POWER_CONTROL); + } + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_4: + writel(BUS_WIDTH_4, host->base + REG_BUS_WIDTH); + break; + case MMC_BUS_WIDTH_8: + writel(BUS_WIDTH_8, host->base + REG_BUS_WIDTH); + break; + default: + writel(BUS_WIDTH_1, host->base + REG_BUS_WIDTH); + break; + } + + spin_unlock_irqrestore(&host->lock, flags); +} + + +static int moxart_get_ro(struct mmc_host *mmc) +{ + struct moxart_host *host = mmc_priv(mmc); + + return !!(readl(host->base + REG_STATUS) & WRITE_PROT); +} + +static struct mmc_host_ops moxart_ops = { + .request = moxart_request, + .set_ios = moxart_set_ios, + .get_ro = moxart_get_ro, +}; + +static int moxart_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct resource res_mmc; + struct mmc_host *mmc; + struct moxart_host *host = NULL; + struct dma_slave_config cfg; + struct clk *clk; + void __iomem *reg_mmc; + dma_cap_mask_t mask; + int irq, ret; + u32 i; + + mmc = mmc_alloc_host(sizeof(struct moxart_host), dev); + if (!mmc) { + dev_err(dev, "mmc_alloc_host failed\n"); + ret = -ENOMEM; + goto out; + } + + ret = of_address_to_resource(node, 0, &res_mmc); + if (ret) { + dev_err(dev, "of_address_to_resource failed\n"); + goto out; + } + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) { + dev_err(dev, "irq_of_parse_and_map failed\n"); + ret = -EINVAL; + goto out; + } + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) { + dev_err(dev, "of_clk_get failed\n"); + ret = PTR_ERR(clk); + goto out; + } + + reg_mmc = devm_ioremap_resource(dev, &res_mmc); + if (IS_ERR(reg_mmc)) { + ret = PTR_ERR(reg_mmc); + goto out; + } + + mmc_of_parse(mmc); + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host = mmc_priv(mmc); + host->mmc = mmc; + host->base = reg_mmc; + host->reg_phys = res_mmc.start; + host->timeout = msecs_to_jiffies(1000); + host->sysclk = clk_get_rate(clk); + host->fifo_width = readl(host->base + REG_FEATURE) << 2; + host->dma_chan_tx = of_dma_request_slave_channel(node, "tx"); + host->dma_chan_rx = of_dma_request_slave_channel(node, "rx"); + + spin_lock_init(&host->lock); + + mmc->ops = &moxart_ops; + mmc->f_max = DIV_ROUND_CLOSEST(host->sysclk, 2); + mmc->f_min = DIV_ROUND_CLOSEST(host->sysclk, CLK_DIV_MASK * 2); + mmc->ocr_avail = 0xffff00; /* Support 2.0v - 3.6v power. */ + + if (IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) { + dev_dbg(dev, "PIO mode transfer enabled\n"); + host->have_dma = false; + } else { + dev_dbg(dev, "DMA channels found (%p,%p)\n", + host->dma_chan_tx, host->dma_chan_rx); + host->have_dma = true; + + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + + cfg.direction = DMA_MEM_TO_DEV; + cfg.src_addr = 0; + cfg.dst_addr = host->reg_phys + REG_DATA_WINDOW; + dmaengine_slave_config(host->dma_chan_tx, &cfg); + + cfg.direction = DMA_DEV_TO_MEM; + cfg.src_addr = host->reg_phys + REG_DATA_WINDOW; + cfg.dst_addr = 0; + dmaengine_slave_config(host->dma_chan_rx, &cfg); + } + + switch ((readl(host->base + REG_BUS_WIDTH) >> 3) & 3) { + case 1: + mmc->caps |= MMC_CAP_4_BIT_DATA; + break; + case 2: + mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; + break; + default: + break; + } + + writel(0, host->base + REG_INTERRUPT_MASK); + + writel(CMD_SDC_RESET, host->base + REG_COMMAND); + for (i = 0; i < MAX_RETRIES; i++) { + if (!(readl(host->base + REG_COMMAND) & CMD_SDC_RESET)) + break; + udelay(5); + } + + ret = devm_request_irq(dev, irq, moxart_irq, 0, "moxart-mmc", host); + if (ret) + goto out; + + dev_set_drvdata(dev, mmc); + mmc_add_host(mmc); + + dev_dbg(dev, "IRQ=%d, FIFO is %d bytes\n", irq, host->fifo_width); + + return 0; + +out: + if (mmc) + mmc_free_host(mmc); + return ret; +} + +static int moxart_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = dev_get_drvdata(&pdev->dev); + struct moxart_host *host = mmc_priv(mmc); + + dev_set_drvdata(&pdev->dev, NULL); + + if (mmc) { + if (!IS_ERR(host->dma_chan_tx)) + dma_release_channel(host->dma_chan_tx); + if (!IS_ERR(host->dma_chan_rx)) + dma_release_channel(host->dma_chan_rx); + mmc_remove_host(mmc); + mmc_free_host(mmc); + + writel(0, host->base + REG_INTERRUPT_MASK); + writel(0, host->base + REG_POWER_CONTROL); + writel(readl(host->base + REG_CLOCK_CONTROL) | CLK_OFF, + host->base + REG_CLOCK_CONTROL); + } + + kfree(host); + + return 0; +} + +static const struct of_device_id moxart_mmc_match[] = { + { .compatible = "moxa,moxart-mmc" }, + { .compatible = "faraday,ftsdc010" }, + { } +}; + +static struct platform_driver moxart_mmc_driver = { + .probe = moxart_probe, + .remove = moxart_remove, + .driver = { + .name = "mmc-moxart", + .owner = THIS_MODULE, + .of_match_table = moxart_mmc_match, + }, +}; +module_platform_driver(moxart_mmc_driver); + +MODULE_ALIAS("platform:mmc-moxart"); +MODULE_DESCRIPTION("MOXA ART MMC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Jonas Jensen "); -- cgit v1.2.3 From c373eb489b27b268c9b8c267b212d10864bc8cdd Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Wed, 23 Apr 2014 17:15:08 +0900 Subject: mmc: core: add DT bindings for eMMC HS400 1.8/1.2V Provide the option to configure these speed modes per host, for those host driver's that can't distinguish this in runtime. Specially, if host can support HS400, it means that host can also support HS200. Signed-off-by: Seungwon Jeon Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++ drivers/mmc/core/host.c | 4 ++++ 2 files changed, 6 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 9dce540771fb..3c18001dfd5d 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -38,6 +38,8 @@ Optional properties: - mmc-highspeed-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported - mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported +- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported +- mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index fdea825dbb24..95cceae96944 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -447,6 +447,10 @@ int mmc_of_parse(struct mmc_host *host) host->caps2 |= MMC_CAP2_HS200_1_8V_SDR; if (of_find_property(np, "mmc-hs200-1_2v", &len)) host->caps2 |= MMC_CAP2_HS200_1_2V_SDR; + if (of_find_property(np, "mmc-hs400-1_8v", &len)) + host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; + if (of_find_property(np, "mmc-hs400-1_2v", &len)) + host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; return 0; -- cgit v1.2.3 From 19b7f796c375a8098924717b171ac5058129d2c4 Mon Sep 17 00:00:00 2001 From: David Lanzendörfer Date: Mon, 12 May 2014 14:04:48 +0200 Subject: mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Allwinner sunxi mmc host uses dma in bus-master mode using a built-in designware idmac controller, which is identical to the one found in the mmc-dw hosts. However the rest of the host is not identical to mmc-dw, it deals with sending stop commands in hardware which makes it significantly different from the mmc-dw devices. Signed-off-by: David Lanzendörfer [hdegoede@redhat.com: various cleanups and fixes] Signed-off-by: Hans de Goede Acked-by: Maxime Ripard Acked-by: Arnd Bergmann Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball --- .../devicetree/bindings/mmc/sunxi-mmc.txt | 43 + drivers/mmc/host/Kconfig | 7 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sunxi-mmc.c | 1049 ++++++++++++++++++++ 4 files changed, 1100 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/sunxi-mmc.txt create mode 100644 drivers/mmc/host/sunxi-mmc.c (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt new file mode 100644 index 000000000000..91b3a3467150 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt @@ -0,0 +1,43 @@ +* Allwinner sunxi MMC controller + +The highspeed MMC host controller on Allwinner SoCs provides an interface +for MMC, SD and SDIO types of memory cards. + +Supported maximum speeds are the ones of the eMMC standard 4.5 as well +as the speed of SD standard 3.0. +Absolute maximum transfer rate is 200MB/s + +Required properties: + - compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc" + - reg : mmc controller base registers + - clocks : a list with 2 phandle + clock specifier pairs + - clock-names : must contain "ahb" and "mmc" + - interrupts : mmc controller interrupt + +Optional properties: + - resets : phandle + reset specifier pair + - reset-names : must contain "ahb" + - for cd, bus-width and additional generic mmc parameters + please refer to mmc.txt within this directory + +Examples: + - Within .dtsi: + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mod"; + interrupts = <0 32 4>; + status = "disabled"; + }; + + - Within dts: + mmc0: mmc@01c0f000 { + pinctrl-names = "default", "default"; + pinctrl-0 = <&mmc0_pins_a>; + pinctrl-1 = <&mmc0_cd_pin_reference_design>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index fd4aab9b79e2..2f8a57da6390 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -710,3 +710,10 @@ config MMC_REALTEK_USB help Say Y here to include driver code to support SD/MMC card interface of Realtek RTS5129/39 series card reader + +config MMC_SUNXI + tristate "Allwinner sunxi SD/MMC Host Controller support" + depends on ARCH_SUNXI + help + This selects support for the SD/MMC Host Controller on + Allwinner sunxi SoCs. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 997912262499..4d7797a941ee 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_MMC_VUB300) += vub300.o obj-$(CONFIG_MMC_USHC) += ushc.o obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o +obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c new file mode 100644 index 000000000000..024f67c98cdc --- /dev/null +++ b/drivers/mmc/host/sunxi-mmc.c @@ -0,0 +1,1049 @@ +/* + * Driver for sunxi SD/MMC host controllers + * (C) Copyright 2007-2011 Reuuimlla Technology Co., Ltd. + * (C) Copyright 2007-2011 Aaron Maoye + * (C) Copyright 2013-2014 O2S GmbH + * (C) Copyright 2013-2014 David Lanzend�rfer + * (C) Copyright 2013-2014 Hans de Goede + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +/* register offset definitions */ +#define SDXC_REG_GCTRL (0x00) /* SMC Global Control Register */ +#define SDXC_REG_CLKCR (0x04) /* SMC Clock Control Register */ +#define SDXC_REG_TMOUT (0x08) /* SMC Time Out Register */ +#define SDXC_REG_WIDTH (0x0C) /* SMC Bus Width Register */ +#define SDXC_REG_BLKSZ (0x10) /* SMC Block Size Register */ +#define SDXC_REG_BCNTR (0x14) /* SMC Byte Count Register */ +#define SDXC_REG_CMDR (0x18) /* SMC Command Register */ +#define SDXC_REG_CARG (0x1C) /* SMC Argument Register */ +#define SDXC_REG_RESP0 (0x20) /* SMC Response Register 0 */ +#define SDXC_REG_RESP1 (0x24) /* SMC Response Register 1 */ +#define SDXC_REG_RESP2 (0x28) /* SMC Response Register 2 */ +#define SDXC_REG_RESP3 (0x2C) /* SMC Response Register 3 */ +#define SDXC_REG_IMASK (0x30) /* SMC Interrupt Mask Register */ +#define SDXC_REG_MISTA (0x34) /* SMC Masked Interrupt Status Register */ +#define SDXC_REG_RINTR (0x38) /* SMC Raw Interrupt Status Register */ +#define SDXC_REG_STAS (0x3C) /* SMC Status Register */ +#define SDXC_REG_FTRGL (0x40) /* SMC FIFO Threshold Watermark Registe */ +#define SDXC_REG_FUNS (0x44) /* SMC Function Select Register */ +#define SDXC_REG_CBCR (0x48) /* SMC CIU Byte Count Register */ +#define SDXC_REG_BBCR (0x4C) /* SMC BIU Byte Count Register */ +#define SDXC_REG_DBGC (0x50) /* SMC Debug Enable Register */ +#define SDXC_REG_HWRST (0x78) /* SMC Card Hardware Reset for Register */ +#define SDXC_REG_DMAC (0x80) /* SMC IDMAC Control Register */ +#define SDXC_REG_DLBA (0x84) /* SMC IDMAC Descriptor List Base Addre */ +#define SDXC_REG_IDST (0x88) /* SMC IDMAC Status Register */ +#define SDXC_REG_IDIE (0x8C) /* SMC IDMAC Interrupt Enable Register */ +#define SDXC_REG_CHDA (0x90) +#define SDXC_REG_CBDA (0x94) + +#define mmc_readl(host, reg) \ + readl((host)->reg_base + SDXC_##reg) +#define mmc_writel(host, reg, value) \ + writel((value), (host)->reg_base + SDXC_##reg) + +/* global control register bits */ +#define SDXC_SOFT_RESET BIT(0) +#define SDXC_FIFO_RESET BIT(1) +#define SDXC_DMA_RESET BIT(2) +#define SDXC_INTERRUPT_ENABLE_BIT BIT(4) +#define SDXC_DMA_ENABLE_BIT BIT(5) +#define SDXC_DEBOUNCE_ENABLE_BIT BIT(8) +#define SDXC_POSEDGE_LATCH_DATA BIT(9) +#define SDXC_DDR_MODE BIT(10) +#define SDXC_MEMORY_ACCESS_DONE BIT(29) +#define SDXC_ACCESS_DONE_DIRECT BIT(30) +#define SDXC_ACCESS_BY_AHB BIT(31) +#define SDXC_ACCESS_BY_DMA (0 << 31) +#define SDXC_HARDWARE_RESET \ + (SDXC_SOFT_RESET | SDXC_FIFO_RESET | SDXC_DMA_RESET) + +/* clock control bits */ +#define SDXC_CARD_CLOCK_ON BIT(16) +#define SDXC_LOW_POWER_ON BIT(17) + +/* bus width */ +#define SDXC_WIDTH1 0 +#define SDXC_WIDTH4 1 +#define SDXC_WIDTH8 2 + +/* smc command bits */ +#define SDXC_RESP_EXPIRE BIT(6) +#define SDXC_LONG_RESPONSE BIT(7) +#define SDXC_CHECK_RESPONSE_CRC BIT(8) +#define SDXC_DATA_EXPIRE BIT(9) +#define SDXC_WRITE BIT(10) +#define SDXC_SEQUENCE_MODE BIT(11) +#define SDXC_SEND_AUTO_STOP BIT(12) +#define SDXC_WAIT_PRE_OVER BIT(13) +#define SDXC_STOP_ABORT_CMD BIT(14) +#define SDXC_SEND_INIT_SEQUENCE BIT(15) +#define SDXC_UPCLK_ONLY BIT(21) +#define SDXC_READ_CEATA_DEV BIT(22) +#define SDXC_CCS_EXPIRE BIT(23) +#define SDXC_ENABLE_BIT_BOOT BIT(24) +#define SDXC_ALT_BOOT_OPTIONS BIT(25) +#define SDXC_BOOT_ACK_EXPIRE BIT(26) +#define SDXC_BOOT_ABORT BIT(27) +#define SDXC_VOLTAGE_SWITCH BIT(28) +#define SDXC_USE_HOLD_REGISTER BIT(29) +#define SDXC_START BIT(31) + +/* interrupt bits */ +#define SDXC_RESP_ERROR BIT(1) +#define SDXC_COMMAND_DONE BIT(2) +#define SDXC_DATA_OVER BIT(3) +#define SDXC_TX_DATA_REQUEST BIT(4) +#define SDXC_RX_DATA_REQUEST BIT(5) +#define SDXC_RESP_CRC_ERROR BIT(6) +#define SDXC_DATA_CRC_ERROR BIT(7) +#define SDXC_RESP_TIMEOUT BIT(8) +#define SDXC_DATA_TIMEOUT BIT(9) +#define SDXC_VOLTAGE_CHANGE_DONE BIT(10) +#define SDXC_FIFO_RUN_ERROR BIT(11) +#define SDXC_HARD_WARE_LOCKED BIT(12) +#define SDXC_START_BIT_ERROR BIT(13) +#define SDXC_AUTO_COMMAND_DONE BIT(14) +#define SDXC_END_BIT_ERROR BIT(15) +#define SDXC_SDIO_INTERRUPT BIT(16) +#define SDXC_CARD_INSERT BIT(30) +#define SDXC_CARD_REMOVE BIT(31) +#define SDXC_INTERRUPT_ERROR_BIT \ + (SDXC_RESP_ERROR | SDXC_RESP_CRC_ERROR | SDXC_DATA_CRC_ERROR | \ + SDXC_RESP_TIMEOUT | SDXC_DATA_TIMEOUT | SDXC_FIFO_RUN_ERROR | \ + SDXC_HARD_WARE_LOCKED | SDXC_START_BIT_ERROR | SDXC_END_BIT_ERROR) +#define SDXC_INTERRUPT_DONE_BIT \ + (SDXC_AUTO_COMMAND_DONE | SDXC_DATA_OVER | \ + SDXC_COMMAND_DONE | SDXC_VOLTAGE_CHANGE_DONE) + +/* status */ +#define SDXC_RXWL_FLAG BIT(0) +#define SDXC_TXWL_FLAG BIT(1) +#define SDXC_FIFO_EMPTY BIT(2) +#define SDXC_FIFO_FULL BIT(3) +#define SDXC_CARD_PRESENT BIT(8) +#define SDXC_CARD_DATA_BUSY BIT(9) +#define SDXC_DATA_FSM_BUSY BIT(10) +#define SDXC_DMA_REQUEST BIT(31) +#define SDXC_FIFO_SIZE 16 + +/* Function select */ +#define SDXC_CEATA_ON (0xceaa << 16) +#define SDXC_SEND_IRQ_RESPONSE BIT(0) +#define SDXC_SDIO_READ_WAIT BIT(1) +#define SDXC_ABORT_READ_DATA BIT(2) +#define SDXC_SEND_CCSD BIT(8) +#define SDXC_SEND_AUTO_STOPCCSD BIT(9) +#define SDXC_CEATA_DEV_IRQ_ENABLE BIT(10) + +/* IDMA controller bus mod bit field */ +#define SDXC_IDMAC_SOFT_RESET BIT(0) +#define SDXC_IDMAC_FIX_BURST BIT(1) +#define SDXC_IDMAC_IDMA_ON BIT(7) +#define SDXC_IDMAC_REFETCH_DES BIT(31) + +/* IDMA status bit field */ +#define SDXC_IDMAC_TRANSMIT_INTERRUPT BIT(0) +#define SDXC_IDMAC_RECEIVE_INTERRUPT BIT(1) +#define SDXC_IDMAC_FATAL_BUS_ERROR BIT(2) +#define SDXC_IDMAC_DESTINATION_INVALID BIT(4) +#define SDXC_IDMAC_CARD_ERROR_SUM BIT(5) +#define SDXC_IDMAC_NORMAL_INTERRUPT_SUM BIT(8) +#define SDXC_IDMAC_ABNORMAL_INTERRUPT_SUM BIT(9) +#define SDXC_IDMAC_HOST_ABORT_INTERRUPT BIT(10) +#define SDXC_IDMAC_IDLE (0 << 13) +#define SDXC_IDMAC_SUSPEND (1 << 13) +#define SDXC_IDMAC_DESC_READ (2 << 13) +#define SDXC_IDMAC_DESC_CHECK (3 << 13) +#define SDXC_IDMAC_READ_REQUEST_WAIT (4 << 13) +#define SDXC_IDMAC_WRITE_REQUEST_WAIT (5 << 13) +#define SDXC_IDMAC_READ (6 << 13) +#define SDXC_IDMAC_WRITE (7 << 13) +#define SDXC_IDMAC_DESC_CLOSE (8 << 13) + +/* +* If the idma-des-size-bits of property is ie 13, bufsize bits are: +* Bits 0-12: buf1 size +* Bits 13-25: buf2 size +* Bits 26-31: not used +* Since we only ever set buf1 size, we can simply store it directly. +*/ +#define SDXC_IDMAC_DES0_DIC BIT(1) /* disable interrupt on completion */ +#define SDXC_IDMAC_DES0_LD BIT(2) /* last descriptor */ +#define SDXC_IDMAC_DES0_FD BIT(3) /* first descriptor */ +#define SDXC_IDMAC_DES0_CH BIT(4) /* chain mode */ +#define SDXC_IDMAC_DES0_ER BIT(5) /* end of ring */ +#define SDXC_IDMAC_DES0_CES BIT(30) /* card error summary */ +#define SDXC_IDMAC_DES0_OWN BIT(31) /* 1-idma owns it, 0-host owns it */ + +struct sunxi_idma_des { + u32 config; + u32 buf_size; + u32 buf_addr_ptr1; + u32 buf_addr_ptr2; +}; + +struct sunxi_mmc_host { + struct mmc_host *mmc; + struct reset_control *reset; + + /* IO mapping base */ + void __iomem *reg_base; + + /* clock management */ + struct clk *clk_ahb; + struct clk *clk_mmc; + + /* irq */ + spinlock_t lock; + int irq; + u32 int_sum; + u32 sdio_imask; + + /* dma */ + u32 idma_des_size_bits; + dma_addr_t sg_dma; + void *sg_cpu; + bool wait_dma; + + struct mmc_request *mrq; + struct mmc_request *manual_stop_mrq; + int ferror; +}; + +static int sunxi_mmc_reset_host(struct sunxi_mmc_host *host) +{ + unsigned long expire = jiffies + msecs_to_jiffies(250); + u32 rval; + + mmc_writel(host, REG_CMDR, SDXC_HARDWARE_RESET); + do { + rval = mmc_readl(host, REG_GCTRL); + } while (time_before(jiffies, expire) && (rval & SDXC_HARDWARE_RESET)); + + if (rval & SDXC_HARDWARE_RESET) { + dev_err(mmc_dev(host->mmc), "fatal err reset timeout\n"); + return -EIO; + } + + return 0; +} + +static int sunxi_mmc_init_host(struct mmc_host *mmc) +{ + u32 rval; + struct sunxi_mmc_host *host = mmc_priv(mmc); + + if (sunxi_mmc_reset_host(host)) + return -EIO; + + mmc_writel(host, REG_FTRGL, 0x20070008); + mmc_writel(host, REG_TMOUT, 0xffffffff); + mmc_writel(host, REG_IMASK, host->sdio_imask); + mmc_writel(host, REG_RINTR, 0xffffffff); + mmc_writel(host, REG_DBGC, 0xdeb); + mmc_writel(host, REG_FUNS, SDXC_CEATA_ON); + mmc_writel(host, REG_DLBA, host->sg_dma); + + rval = mmc_readl(host, REG_GCTRL); + rval |= SDXC_INTERRUPT_ENABLE_BIT; + rval &= ~SDXC_ACCESS_DONE_DIRECT; + mmc_writel(host, REG_GCTRL, rval); + + return 0; +} + +static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host, + struct mmc_data *data) +{ + struct sunxi_idma_des *pdes = (struct sunxi_idma_des *)host->sg_cpu; + struct sunxi_idma_des *pdes_pa = (struct sunxi_idma_des *)host->sg_dma; + int i, max_len = (1 << host->idma_des_size_bits); + + for (i = 0; i < data->sg_len; i++) { + pdes[i].config = SDXC_IDMAC_DES0_CH | SDXC_IDMAC_DES0_OWN | + SDXC_IDMAC_DES0_DIC; + + if (data->sg[i].length == max_len) + pdes[i].buf_size = 0; /* 0 == max_len */ + else + pdes[i].buf_size = data->sg[i].length; + + pdes[i].buf_addr_ptr1 = sg_dma_address(&data->sg[i]); + pdes[i].buf_addr_ptr2 = (u32)&pdes_pa[i + 1]; + } + + pdes[0].config |= SDXC_IDMAC_DES0_FD; + pdes[i - 1].config = SDXC_IDMAC_DES0_OWN | SDXC_IDMAC_DES0_LD; + + /* + * Avoid the io-store starting the idmac hitting io-mem before the + * descriptors hit the main-mem. + */ + wmb(); +} + +static enum dma_data_direction sunxi_mmc_get_dma_dir(struct mmc_data *data) +{ + if (data->flags & MMC_DATA_WRITE) + return DMA_TO_DEVICE; + else + return DMA_FROM_DEVICE; +} + +static int sunxi_mmc_map_dma(struct sunxi_mmc_host *host, + struct mmc_data *data) +{ + u32 i, dma_len; + struct scatterlist *sg; + + dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + sunxi_mmc_get_dma_dir(data)); + if (dma_len == 0) { + dev_err(mmc_dev(host->mmc), "dma_map_sg failed\n"); + return -ENOMEM; + } + + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 3 || sg->length & 3) { + dev_err(mmc_dev(host->mmc), + "unaligned scatterlist: os %x length %d\n", + sg->offset, sg->length); + return -EINVAL; + } + } + + return 0; +} + +static void sunxi_mmc_start_dma(struct sunxi_mmc_host *host, + struct mmc_data *data) +{ + u32 rval; + + sunxi_mmc_init_idma_des(host, data); + + rval = mmc_readl(host, REG_GCTRL); + rval |= SDXC_DMA_ENABLE_BIT; + mmc_writel(host, REG_GCTRL, rval); + rval |= SDXC_DMA_RESET; + mmc_writel(host, REG_GCTRL, rval); + + mmc_writel(host, REG_DMAC, SDXC_IDMAC_SOFT_RESET); + + if (!(data->flags & MMC_DATA_WRITE)) + mmc_writel(host, REG_IDIE, SDXC_IDMAC_RECEIVE_INTERRUPT); + + mmc_writel(host, REG_DMAC, + SDXC_IDMAC_FIX_BURST | SDXC_IDMAC_IDMA_ON); +} + +static void sunxi_mmc_send_manual_stop(struct sunxi_mmc_host *host, + struct mmc_request *req) +{ + u32 arg, cmd_val, ri; + unsigned long expire = jiffies + msecs_to_jiffies(1000); + + cmd_val = SDXC_START | SDXC_RESP_EXPIRE | + SDXC_STOP_ABORT_CMD | SDXC_CHECK_RESPONSE_CRC; + + if (req->cmd->opcode == SD_IO_RW_EXTENDED) { + cmd_val |= SD_IO_RW_DIRECT; + arg = (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) | + ((req->cmd->arg >> 28) & 0x7); + } else { + cmd_val |= MMC_STOP_TRANSMISSION; + arg = 0; + } + + mmc_writel(host, REG_CARG, arg); + mmc_writel(host, REG_CMDR, cmd_val); + + do { + ri = mmc_readl(host, REG_RINTR); + } while (!(ri & (SDXC_COMMAND_DONE | SDXC_INTERRUPT_ERROR_BIT)) && + time_before(jiffies, expire)); + + if (!(ri & SDXC_COMMAND_DONE) || (ri & SDXC_INTERRUPT_ERROR_BIT)) { + dev_err(mmc_dev(host->mmc), "send stop command failed\n"); + if (req->stop) + req->stop->resp[0] = -ETIMEDOUT; + } else { + if (req->stop) + req->stop->resp[0] = mmc_readl(host, REG_RESP0); + } + + mmc_writel(host, REG_RINTR, 0xffff); +} + +static void sunxi_mmc_dump_errinfo(struct sunxi_mmc_host *host) +{ + struct mmc_command *cmd = host->mrq->cmd; + struct mmc_data *data = host->mrq->data; + + /* For some cmds timeout is normal with sd/mmc cards */ + if ((host->int_sum & SDXC_INTERRUPT_ERROR_BIT) == + SDXC_RESP_TIMEOUT && (cmd->opcode == SD_IO_SEND_OP_COND || + cmd->opcode == SD_IO_RW_DIRECT)) + return; + + dev_err(mmc_dev(host->mmc), + "smc %d err, cmd %d,%s%s%s%s%s%s%s%s%s%s !!\n", + host->mmc->index, cmd->opcode, + data ? (data->flags & MMC_DATA_WRITE ? " WR" : " RD") : "", + host->int_sum & SDXC_RESP_ERROR ? " RE" : "", + host->int_sum & SDXC_RESP_CRC_ERROR ? " RCE" : "", + host->int_sum & SDXC_DATA_CRC_ERROR ? " DCE" : "", + host->int_sum & SDXC_RESP_TIMEOUT ? " RTO" : "", + host->int_sum & SDXC_DATA_TIMEOUT ? " DTO" : "", + host->int_sum & SDXC_FIFO_RUN_ERROR ? " FE" : "", + host->int_sum & SDXC_HARD_WARE_LOCKED ? " HL" : "", + host->int_sum & SDXC_START_BIT_ERROR ? " SBE" : "", + host->int_sum & SDXC_END_BIT_ERROR ? " EBE" : "" + ); +} + +/* Called in interrupt context! */ +static irqreturn_t sunxi_mmc_finalize_request(struct sunxi_mmc_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_data *data = mrq->data; + u32 rval; + + mmc_writel(host, REG_IMASK, host->sdio_imask); + mmc_writel(host, REG_IDIE, 0); + + if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) { + sunxi_mmc_dump_errinfo(host); + mrq->cmd->error = -ETIMEDOUT; + + if (data) { + data->error = -ETIMEDOUT; + host->manual_stop_mrq = mrq; + } + + if (mrq->stop) + mrq->stop->error = -ETIMEDOUT; + } else { + if (mrq->cmd->flags & MMC_RSP_136) { + mrq->cmd->resp[0] = mmc_readl(host, REG_RESP3); + mrq->cmd->resp[1] = mmc_readl(host, REG_RESP2); + mrq->cmd->resp[2] = mmc_readl(host, REG_RESP1); + mrq->cmd->resp[3] = mmc_readl(host, REG_RESP0); + } else { + mrq->cmd->resp[0] = mmc_readl(host, REG_RESP0); + } + + if (data) + data->bytes_xfered = data->blocks * data->blksz; + } + + if (data) { + mmc_writel(host, REG_IDST, 0x337); + mmc_writel(host, REG_DMAC, 0); + rval = mmc_readl(host, REG_GCTRL); + rval |= SDXC_DMA_RESET; + mmc_writel(host, REG_GCTRL, rval); + rval &= ~SDXC_DMA_ENABLE_BIT; + mmc_writel(host, REG_GCTRL, rval); + rval |= SDXC_FIFO_RESET; + mmc_writel(host, REG_GCTRL, rval); + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + sunxi_mmc_get_dma_dir(data)); + } + + mmc_writel(host, REG_RINTR, 0xffff); + + host->mrq = NULL; + host->int_sum = 0; + host->wait_dma = false; + + return host->manual_stop_mrq ? IRQ_WAKE_THREAD : IRQ_HANDLED; +} + +static irqreturn_t sunxi_mmc_irq(int irq, void *dev_id) +{ + struct sunxi_mmc_host *host = dev_id; + struct mmc_request *mrq; + u32 msk_int, idma_int; + bool finalize = false; + bool sdio_int = false; + irqreturn_t ret = IRQ_HANDLED; + + spin_lock(&host->lock); + + idma_int = mmc_readl(host, REG_IDST); + msk_int = mmc_readl(host, REG_MISTA); + + dev_dbg(mmc_dev(host->mmc), "irq: rq %p mi %08x idi %08x\n", + host->mrq, msk_int, idma_int); + + mrq = host->mrq; + if (mrq) { + if (idma_int & SDXC_IDMAC_RECEIVE_INTERRUPT) + host->wait_dma = false; + + host->int_sum |= msk_int; + + /* Wait for COMMAND_DONE on RESPONSE_TIMEOUT before finalize */ + if ((host->int_sum & SDXC_RESP_TIMEOUT) && + !(host->int_sum & SDXC_COMMAND_DONE)) + mmc_writel(host, REG_IMASK, + host->sdio_imask | SDXC_COMMAND_DONE); + /* Don't wait for dma on error */ + else if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) + finalize = true; + else if ((host->int_sum & SDXC_INTERRUPT_DONE_BIT) && + !host->wait_dma) + finalize = true; + } + + if (msk_int & SDXC_SDIO_INTERRUPT) + sdio_int = true; + + mmc_writel(host, REG_RINTR, msk_int); + mmc_writel(host, REG_IDST, idma_int); + + if (finalize) + ret = sunxi_mmc_finalize_request(host); + + spin_unlock(&host->lock); + + if (finalize && ret == IRQ_HANDLED) + mmc_request_done(host->mmc, mrq); + + if (sdio_int) + mmc_signal_sdio_irq(host->mmc); + + return ret; +} + +static irqreturn_t sunxi_mmc_handle_manual_stop(int irq, void *dev_id) +{ + struct sunxi_mmc_host *host = dev_id; + struct mmc_request *mrq; + unsigned long iflags; + + spin_lock_irqsave(&host->lock, iflags); + mrq = host->manual_stop_mrq; + spin_unlock_irqrestore(&host->lock, iflags); + + if (!mrq) { + dev_err(mmc_dev(host->mmc), "no request for manual stop\n"); + return IRQ_HANDLED; + } + + dev_err(mmc_dev(host->mmc), "data error, sending stop command\n"); + sunxi_mmc_send_manual_stop(host, mrq); + + spin_lock_irqsave(&host->lock, iflags); + host->manual_stop_mrq = NULL; + spin_unlock_irqrestore(&host->lock, iflags); + + mmc_request_done(host->mmc, mrq); + + return IRQ_HANDLED; +} + +static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en) +{ + unsigned long expire = jiffies + msecs_to_jiffies(250); + u32 rval; + + rval = mmc_readl(host, REG_CLKCR); + rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON); + + if (oclk_en) + rval |= SDXC_CARD_CLOCK_ON; + + mmc_writel(host, REG_CLKCR, rval); + + rval = SDXC_START | SDXC_UPCLK_ONLY | SDXC_WAIT_PRE_OVER; + mmc_writel(host, REG_CMDR, rval); + + do { + rval = mmc_readl(host, REG_CMDR); + } while (time_before(jiffies, expire) && (rval & SDXC_START)); + + /* clear irq status bits set by the command */ + mmc_writel(host, REG_RINTR, + mmc_readl(host, REG_RINTR) & ~SDXC_SDIO_INTERRUPT); + + if (rval & SDXC_START) { + dev_err(mmc_dev(host->mmc), "fatal err update clk timeout\n"); + return -EIO; + } + + return 0; +} + +static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host, + struct mmc_ios *ios) +{ + u32 rate, oclk_dly, rval, sclk_dly, src_clk; + int ret; + + rate = clk_round_rate(host->clk_mmc, ios->clock); + dev_dbg(mmc_dev(host->mmc), "setting clk to %d, rounded %d\n", + ios->clock, rate); + + /* setting clock rate */ + ret = clk_set_rate(host->clk_mmc, rate); + if (ret) { + dev_err(mmc_dev(host->mmc), "error setting clk to %d: %d\n", + rate, ret); + return ret; + } + + ret = sunxi_mmc_oclk_onoff(host, 0); + if (ret) + return ret; + + /* clear internal divider */ + rval = mmc_readl(host, REG_CLKCR); + rval &= ~0xff; + mmc_writel(host, REG_CLKCR, rval); + + /* determine delays */ + if (rate <= 400000) { + oclk_dly = 0; + sclk_dly = 7; + } else if (rate <= 25000000) { + oclk_dly = 0; + sclk_dly = 5; + } else if (rate <= 50000000) { + if (ios->timing == MMC_TIMING_UHS_DDR50) { + oclk_dly = 2; + sclk_dly = 4; + } else { + oclk_dly = 3; + sclk_dly = 5; + } + } else { + /* rate > 50000000 */ + oclk_dly = 2; + sclk_dly = 4; + } + + src_clk = clk_get_rate(clk_get_parent(host->clk_mmc)); + if (src_clk >= 300000000 && src_clk <= 400000000) { + if (oclk_dly) + oclk_dly--; + if (sclk_dly) + sclk_dly--; + } + + clk_sunxi_mmc_phase_control(host->clk_mmc, sclk_dly, oclk_dly); + + return sunxi_mmc_oclk_onoff(host, 1); +} + +static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sunxi_mmc_host *host = mmc_priv(mmc); + u32 rval; + + /* Set the power state */ + switch (ios->power_mode) { + case MMC_POWER_ON: + break; + + case MMC_POWER_UP: + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); + + host->ferror = sunxi_mmc_init_host(mmc); + if (host->ferror) + return; + + dev_dbg(mmc_dev(mmc), "power on!\n"); + break; + + case MMC_POWER_OFF: + dev_dbg(mmc_dev(mmc), "power off!\n"); + sunxi_mmc_reset_host(host); + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + break; + } + + /* set bus width */ + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + mmc_writel(host, REG_WIDTH, SDXC_WIDTH1); + break; + case MMC_BUS_WIDTH_4: + mmc_writel(host, REG_WIDTH, SDXC_WIDTH4); + break; + case MMC_BUS_WIDTH_8: + mmc_writel(host, REG_WIDTH, SDXC_WIDTH8); + break; + } + + /* set ddr mode */ + rval = mmc_readl(host, REG_GCTRL); + if (ios->timing == MMC_TIMING_UHS_DDR50) + rval |= SDXC_DDR_MODE; + else + rval &= ~SDXC_DDR_MODE; + mmc_writel(host, REG_GCTRL, rval); + + /* set up clock */ + if (ios->clock && ios->power_mode) { + host->ferror = sunxi_mmc_clk_set_rate(host, ios); + /* Android code had a usleep_range(50000, 55000); here */ + } +} + +static void sunxi_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct sunxi_mmc_host *host = mmc_priv(mmc); + unsigned long flags; + u32 imask; + + spin_lock_irqsave(&host->lock, flags); + + imask = mmc_readl(host, REG_IMASK); + if (enable) { + host->sdio_imask = SDXC_SDIO_INTERRUPT; + imask |= SDXC_SDIO_INTERRUPT; + } else { + host->sdio_imask = 0; + imask &= ~SDXC_SDIO_INTERRUPT; + } + mmc_writel(host, REG_IMASK, imask); + spin_unlock_irqrestore(&host->lock, flags); +} + +static void sunxi_mmc_hw_reset(struct mmc_host *mmc) +{ + struct sunxi_mmc_host *host = mmc_priv(mmc); + mmc_writel(host, REG_HWRST, 0); + udelay(10); + mmc_writel(host, REG_HWRST, 1); + udelay(300); +} + +static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct sunxi_mmc_host *host = mmc_priv(mmc); + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + unsigned long iflags; + u32 imask = SDXC_INTERRUPT_ERROR_BIT; + u32 cmd_val = SDXC_START | (cmd->opcode & 0x3f); + int ret; + + /* Check for set_ios errors (should never happen) */ + if (host->ferror) { + mrq->cmd->error = host->ferror; + mmc_request_done(mmc, mrq); + return; + } + + if (data) { + ret = sunxi_mmc_map_dma(host, data); + if (ret < 0) { + dev_err(mmc_dev(mmc), "map DMA failed\n"); + cmd->error = ret; + data->error = ret; + mmc_request_done(mmc, mrq); + return; + } + } + + if (cmd->opcode == MMC_GO_IDLE_STATE) { + cmd_val |= SDXC_SEND_INIT_SEQUENCE; + imask |= SDXC_COMMAND_DONE; + } + + if (cmd->flags & MMC_RSP_PRESENT) { + cmd_val |= SDXC_RESP_EXPIRE; + if (cmd->flags & MMC_RSP_136) + cmd_val |= SDXC_LONG_RESPONSE; + if (cmd->flags & MMC_RSP_CRC) + cmd_val |= SDXC_CHECK_RESPONSE_CRC; + + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) { + cmd_val |= SDXC_DATA_EXPIRE | SDXC_WAIT_PRE_OVER; + if (cmd->data->flags & MMC_DATA_STREAM) { + imask |= SDXC_AUTO_COMMAND_DONE; + cmd_val |= SDXC_SEQUENCE_MODE | + SDXC_SEND_AUTO_STOP; + } + + if (cmd->data->stop) { + imask |= SDXC_AUTO_COMMAND_DONE; + cmd_val |= SDXC_SEND_AUTO_STOP; + } else { + imask |= SDXC_DATA_OVER; + } + + if (cmd->data->flags & MMC_DATA_WRITE) + cmd_val |= SDXC_WRITE; + else + host->wait_dma = true; + } else { + imask |= SDXC_COMMAND_DONE; + } + } else { + imask |= SDXC_COMMAND_DONE; + } + + dev_dbg(mmc_dev(mmc), "cmd %d(%08x) arg %x ie 0x%08x len %d\n", + cmd_val & 0x3f, cmd_val, cmd->arg, imask, + mrq->data ? mrq->data->blksz * mrq->data->blocks : 0); + + spin_lock_irqsave(&host->lock, iflags); + + if (host->mrq || host->manual_stop_mrq) { + spin_unlock_irqrestore(&host->lock, iflags); + + if (data) + dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, + sunxi_mmc_get_dma_dir(data)); + + dev_err(mmc_dev(mmc), "request already pending\n"); + mrq->cmd->error = -EBUSY; + mmc_request_done(mmc, mrq); + return; + } + + if (data) { + mmc_writel(host, REG_BLKSZ, data->blksz); + mmc_writel(host, REG_BCNTR, data->blksz * data->blocks); + sunxi_mmc_start_dma(host, data); + } + + host->mrq = mrq; + mmc_writel(host, REG_IMASK, host->sdio_imask | imask); + mmc_writel(host, REG_CARG, cmd->arg); + mmc_writel(host, REG_CMDR, cmd_val); + + spin_unlock_irqrestore(&host->lock, iflags); +} + +static const struct of_device_id sunxi_mmc_of_match[] = { + { .compatible = "allwinner,sun4i-a10-mmc", }, + { .compatible = "allwinner,sun5i-a13-mmc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match); + +static struct mmc_host_ops sunxi_mmc_ops = { + .request = sunxi_mmc_request, + .set_ios = sunxi_mmc_set_ios, + .get_ro = mmc_gpio_get_ro, + .get_cd = mmc_gpio_get_cd, + .enable_sdio_irq = sunxi_mmc_enable_sdio_irq, + .hw_reset = sunxi_mmc_hw_reset, +}; + +static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + if (of_device_is_compatible(np, "allwinner,sun4i-a10-mmc")) + host->idma_des_size_bits = 13; + else + host->idma_des_size_bits = 16; + + ret = mmc_regulator_get_supply(host->mmc); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "Could not get vmmc supply\n"); + return ret; + } + + host->reg_base = devm_ioremap_resource(&pdev->dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0)); + if (IS_ERR(host->reg_base)) + return PTR_ERR(host->reg_base); + + host->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(host->clk_ahb)) { + dev_err(&pdev->dev, "Could not get ahb clock\n"); + return PTR_ERR(host->clk_ahb); + } + + host->clk_mmc = devm_clk_get(&pdev->dev, "mmc"); + if (IS_ERR(host->clk_mmc)) { + dev_err(&pdev->dev, "Could not get mmc clock\n"); + return PTR_ERR(host->clk_mmc); + } + + host->reset = devm_reset_control_get(&pdev->dev, "ahb"); + + ret = clk_prepare_enable(host->clk_ahb); + if (ret) { + dev_err(&pdev->dev, "Enable ahb clk err %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(host->clk_mmc); + if (ret) { + dev_err(&pdev->dev, "Enable mmc clk err %d\n", ret); + goto error_disable_clk_ahb; + } + + if (!IS_ERR(host->reset)) { + ret = reset_control_deassert(host->reset); + if (ret) { + dev_err(&pdev->dev, "reset err %d\n", ret); + goto error_disable_clk_mmc; + } + } + + /* + * Sometimes the controller asserts the irq on boot for some reason, + * make sure the controller is in a sane state before enabling irqs. + */ + ret = sunxi_mmc_reset_host(host); + if (ret) + goto error_assert_reset; + + host->irq = platform_get_irq(pdev, 0); + return devm_request_threaded_irq(&pdev->dev, host->irq, sunxi_mmc_irq, + sunxi_mmc_handle_manual_stop, 0, "sunxi-mmc", host); + +error_assert_reset: + if (!IS_ERR(host->reset)) + reset_control_assert(host->reset); +error_disable_clk_mmc: + clk_disable_unprepare(host->clk_mmc); +error_disable_clk_ahb: + clk_disable_unprepare(host->clk_ahb); + return ret; +} + +static int sunxi_mmc_probe(struct platform_device *pdev) +{ + struct sunxi_mmc_host *host; + struct mmc_host *mmc; + int ret; + + mmc = mmc_alloc_host(sizeof(struct sunxi_mmc_host), &pdev->dev); + if (!mmc) { + dev_err(&pdev->dev, "mmc alloc host failed\n"); + return -ENOMEM; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + spin_lock_init(&host->lock); + + ret = sunxi_mmc_resource_request(host, pdev); + if (ret) + goto error_free_host; + + host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, + &host->sg_dma, GFP_KERNEL); + if (!host->sg_cpu) { + dev_err(&pdev->dev, "Failed to allocate DMA descriptor mem\n"); + ret = -ENOMEM; + goto error_free_host; + } + + mmc->ops = &sunxi_mmc_ops; + mmc->max_blk_count = 8192; + mmc->max_blk_size = 4096; + mmc->max_segs = PAGE_SIZE / sizeof(struct sunxi_idma_des); + mmc->max_seg_size = (1 << host->idma_des_size_bits); + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; + /* 400kHz ~ 50MHz */ + mmc->f_min = 400000; + mmc->f_max = 50000000; + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; + + ret = mmc_of_parse(mmc); + if (ret) + goto error_free_dma; + + ret = mmc_add_host(mmc); + if (ret) + goto error_free_dma; + + dev_info(&pdev->dev, "base:0x%p irq:%u\n", host->reg_base, host->irq); + platform_set_drvdata(pdev, mmc); + return 0; + +error_free_dma: + dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); +error_free_host: + mmc_free_host(mmc); + return ret; +} + +static int sunxi_mmc_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct sunxi_mmc_host *host = mmc_priv(mmc); + + mmc_remove_host(mmc); + disable_irq(host->irq); + sunxi_mmc_reset_host(host); + + if (!IS_ERR(host->reset)) + reset_control_assert(host->reset); + + clk_disable_unprepare(host->clk_mmc); + clk_disable_unprepare(host->clk_ahb); + + dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); + mmc_free_host(mmc); + + return 0; +} + +static struct platform_driver sunxi_mmc_driver = { + .driver = { + .name = "sunxi-mmc", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sunxi_mmc_of_match), + }, + .probe = sunxi_mmc_probe, + .remove = sunxi_mmc_remove, +}; +module_platform_driver(sunxi_mmc_driver); + +MODULE_DESCRIPTION("Allwinner's SD/MMC Card Controller Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("David Lanzend�rfer "); +MODULE_ALIAS("platform:sunxi-mmc"); -- cgit v1.2.3 From 75fa9ea6e3c0223cf9f56ed15b0ea3e9ccc627f1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sat, 31 May 2014 20:38:51 +0200 Subject: mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller This patch adds a driver for the Renesas usdhi6rol0 SD/SDIO host controller in both PIO and DMA modes. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- .../devicetree/bindings/mmc/usdhi6rol0.txt | 33 + drivers/mmc/host/Kconfig | 6 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/usdhi6rol0.c | 1847 ++++++++++++++++++++ 4 files changed, 1887 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/usdhi6rol0.txt create mode 100644 drivers/mmc/host/usdhi6rol0.c (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt new file mode 100644 index 000000000000..8babdaa8623b --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt @@ -0,0 +1,33 @@ +* Renesas usdhi6rol0 SD/SDIO host controller + +Required properties: + +- compatible: must be + "renesas,usdhi6rol0" +- interrupts: 3 interrupts, named "card detect", "data" and "SDIO" must be + specified +- clocks: a clock binding for the IMCLK input + +Optional properties: + +- vmmc-supply: a phandle of a regulator, supplying Vcc to the card +- vqmmc-supply: a phandle of a regulator, supplying VccQ to the card + +Additionally any standard mmc bindings from mmc.txt can be used. + +Example: + +sd0: sd@ab000000 { + compatible = "renesas,usdhi6rol0"; + reg = <0xab000000 0x200>; + interrupts = <0 23 0x4 + 0 24 0x4 + 0 25 0x4>; + interrupt-names = "card detect", "data", "SDIO"; + bus-width = <4>; + max-frequency = <50000000>; + cap-power-off-card; + clocks = <&imclk>; + vmmc-supply = <&vcc_sd0>; + vqmmc-supply = <&vccq_sd0>; +}; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 140c118c3bb4..7fee22432e94 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -697,6 +697,12 @@ config MMC_WMT To compile this driver as a module, choose M here: the module will be called wmt-sdmmc. +config MMC_USDHI6ROL0 + tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support" + help + This selects support for the Renesas USDHI6ROL0 SD/SDIO + Host Controller + config MMC_REALTEK_PCI tristate "Realtek PCI-E SD/MMC Card Interface Driver" depends on MFD_RTSX_PCI diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 4d7797a941ee..7f81ddf1dd2c 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_MMC_USHC) += ushc.o obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o +obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c new file mode 100644 index 000000000000..eb2bbbef19c6 --- /dev/null +++ b/drivers/mmc/host/usdhi6rol0.c @@ -0,0 +1,1847 @@ +/* + * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd. + * Author: Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USDHI6_SD_CMD 0x0000 +#define USDHI6_SD_PORT_SEL 0x0004 +#define USDHI6_SD_ARG 0x0008 +#define USDHI6_SD_STOP 0x0010 +#define USDHI6_SD_SECCNT 0x0014 +#define USDHI6_SD_RSP10 0x0018 +#define USDHI6_SD_RSP32 0x0020 +#define USDHI6_SD_RSP54 0x0028 +#define USDHI6_SD_RSP76 0x0030 +#define USDHI6_SD_INFO1 0x0038 +#define USDHI6_SD_INFO2 0x003c +#define USDHI6_SD_INFO1_MASK 0x0040 +#define USDHI6_SD_INFO2_MASK 0x0044 +#define USDHI6_SD_CLK_CTRL 0x0048 +#define USDHI6_SD_SIZE 0x004c +#define USDHI6_SD_OPTION 0x0050 +#define USDHI6_SD_ERR_STS1 0x0058 +#define USDHI6_SD_ERR_STS2 0x005c +#define USDHI6_SD_BUF0 0x0060 +#define USDHI6_SDIO_MODE 0x0068 +#define USDHI6_SDIO_INFO1 0x006c +#define USDHI6_SDIO_INFO1_MASK 0x0070 +#define USDHI6_CC_EXT_MODE 0x01b0 +#define USDHI6_SOFT_RST 0x01c0 +#define USDHI6_VERSION 0x01c4 +#define USDHI6_HOST_MODE 0x01c8 +#define USDHI6_SDIF_MODE 0x01cc + +#define USDHI6_SD_CMD_APP 0x0040 +#define USDHI6_SD_CMD_MODE_RSP_AUTO 0x0000 +#define USDHI6_SD_CMD_MODE_RSP_NONE 0x0300 +#define USDHI6_SD_CMD_MODE_RSP_R1 0x0400 /* Also R5, R6, R7 */ +#define USDHI6_SD_CMD_MODE_RSP_R1B 0x0500 /* R1b */ +#define USDHI6_SD_CMD_MODE_RSP_R2 0x0600 +#define USDHI6_SD_CMD_MODE_RSP_R3 0x0700 /* Also R4 */ +#define USDHI6_SD_CMD_DATA 0x0800 +#define USDHI6_SD_CMD_READ 0x1000 +#define USDHI6_SD_CMD_MULTI 0x2000 +#define USDHI6_SD_CMD_CMD12_AUTO_OFF 0x4000 + +#define USDHI6_CC_EXT_MODE_SDRW BIT(1) + +#define USDHI6_SD_INFO1_RSP_END BIT(0) +#define USDHI6_SD_INFO1_ACCESS_END BIT(2) +#define USDHI6_SD_INFO1_CARD_OUT BIT(3) +#define USDHI6_SD_INFO1_CARD_IN BIT(4) +#define USDHI6_SD_INFO1_CD BIT(5) +#define USDHI6_SD_INFO1_WP BIT(7) +#define USDHI6_SD_INFO1_D3_CARD_OUT BIT(8) +#define USDHI6_SD_INFO1_D3_CARD_IN BIT(9) + +#define USDHI6_SD_INFO2_CMD_ERR BIT(0) +#define USDHI6_SD_INFO2_CRC_ERR BIT(1) +#define USDHI6_SD_INFO2_END_ERR BIT(2) +#define USDHI6_SD_INFO2_TOUT BIT(3) +#define USDHI6_SD_INFO2_IWA_ERR BIT(4) +#define USDHI6_SD_INFO2_IRA_ERR BIT(5) +#define USDHI6_SD_INFO2_RSP_TOUT BIT(6) +#define USDHI6_SD_INFO2_SDDAT0 BIT(7) +#define USDHI6_SD_INFO2_BRE BIT(8) +#define USDHI6_SD_INFO2_BWE BIT(9) +#define USDHI6_SD_INFO2_SCLKDIVEN BIT(13) +#define USDHI6_SD_INFO2_CBSY BIT(14) +#define USDHI6_SD_INFO2_ILA BIT(15) + +#define USDHI6_SD_INFO1_CARD_INSERT (USDHI6_SD_INFO1_CARD_IN | USDHI6_SD_INFO1_D3_CARD_IN) +#define USDHI6_SD_INFO1_CARD_EJECT (USDHI6_SD_INFO1_CARD_OUT | USDHI6_SD_INFO1_D3_CARD_OUT) +#define USDHI6_SD_INFO1_CARD (USDHI6_SD_INFO1_CARD_INSERT | USDHI6_SD_INFO1_CARD_EJECT) +#define USDHI6_SD_INFO1_CARD_CD (USDHI6_SD_INFO1_CARD_IN | USDHI6_SD_INFO1_CARD_OUT) + +#define USDHI6_SD_INFO2_ERR (USDHI6_SD_INFO2_CMD_ERR | \ + USDHI6_SD_INFO2_CRC_ERR | USDHI6_SD_INFO2_END_ERR | \ + USDHI6_SD_INFO2_TOUT | USDHI6_SD_INFO2_IWA_ERR | \ + USDHI6_SD_INFO2_IRA_ERR | USDHI6_SD_INFO2_RSP_TOUT | \ + USDHI6_SD_INFO2_ILA) + +#define USDHI6_SD_INFO1_IRQ (USDHI6_SD_INFO1_RSP_END | USDHI6_SD_INFO1_ACCESS_END | \ + USDHI6_SD_INFO1_CARD) + +#define USDHI6_SD_INFO2_IRQ (USDHI6_SD_INFO2_ERR | USDHI6_SD_INFO2_BRE | \ + USDHI6_SD_INFO2_BWE | 0x0800 | USDHI6_SD_INFO2_ILA) + +#define USDHI6_SD_CLK_CTRL_SCLKEN BIT(8) + +#define USDHI6_SD_STOP_STP BIT(0) +#define USDHI6_SD_STOP_SEC BIT(8) + +#define USDHI6_SDIO_INFO1_IOIRQ BIT(0) +#define USDHI6_SDIO_INFO1_EXPUB52 BIT(14) +#define USDHI6_SDIO_INFO1_EXWT BIT(15) + +#define USDHI6_SD_ERR_STS1_CRC_NO_ERROR BIT(13) + +#define USDHI6_SOFT_RST_RESERVED (BIT(1) | BIT(2)) +#define USDHI6_SOFT_RST_RESET BIT(0) + +#define USDHI6_SD_OPTION_TIMEOUT_SHIFT 4 +#define USDHI6_SD_OPTION_TIMEOUT_MASK (0xf << USDHI6_SD_OPTION_TIMEOUT_SHIFT) +#define USDHI6_SD_OPTION_WIDTH_1 BIT(15) + +#define USDHI6_SD_PORT_SEL_PORTS_SHIFT 8 + +#define USDHI6_SD_CLK_CTRL_DIV_MASK 0xff + +#define USDHI6_SDIO_INFO1_IRQ (USDHI6_SDIO_INFO1_IOIRQ | 3 | \ + USDHI6_SDIO_INFO1_EXPUB52 | USDHI6_SDIO_INFO1_EXWT) + +#define USDHI6_MIN_DMA 64 + +enum usdhi6_wait_for { + USDHI6_WAIT_FOR_REQUEST, + USDHI6_WAIT_FOR_CMD, + USDHI6_WAIT_FOR_MREAD, + USDHI6_WAIT_FOR_MWRITE, + USDHI6_WAIT_FOR_READ, + USDHI6_WAIT_FOR_WRITE, + USDHI6_WAIT_FOR_DATA_END, + USDHI6_WAIT_FOR_STOP, + USDHI6_WAIT_FOR_DMA, +}; + +struct usdhi6_page { + struct page *page; + void *mapped; /* mapped page */ +}; + +struct usdhi6_host { + struct mmc_host *mmc; + struct mmc_request *mrq; + void __iomem *base; + struct clk *clk; + + /* SG memory handling */ + + /* Common for multiple and single block requests */ + struct usdhi6_page pg; /* current page from an SG */ + void *blk_page; /* either a mapped page, or the bounce buffer */ + size_t offset; /* offset within a page, including sg->offset */ + + /* Blocks, crossing a page boundary */ + size_t head_len; + struct usdhi6_page head_pg; + + /* A bounce buffer for unaligned blocks or blocks, crossing a page boundary */ + struct scatterlist bounce_sg; + u8 bounce_buf[512]; + + /* Multiple block requests only */ + struct scatterlist *sg; /* current SG segment */ + int page_idx; /* page index within an SG segment */ + + enum usdhi6_wait_for wait; + u32 status_mask; + u32 status2_mask; + u32 sdio_mask; + u32 io_error; + u32 irq_status; + unsigned long imclk; + unsigned long rate; + bool app_cmd; + + /* Timeout handling */ + struct delayed_work timeout_work; + unsigned long timeout; + + /* DMA support */ + struct dma_chan *chan_rx; + struct dma_chan *chan_tx; + bool dma_active; +}; + +/* I/O primitives */ + +static void usdhi6_write(struct usdhi6_host *host, u32 reg, u32 data) +{ + iowrite32(data, host->base + reg); + dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__, + host->base, reg, data); +} + +static void usdhi6_write16(struct usdhi6_host *host, u32 reg, u16 data) +{ + iowrite16(data, host->base + reg); + dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__, + host->base, reg, data); +} + +static u32 usdhi6_read(struct usdhi6_host *host, u32 reg) +{ + u32 data = ioread32(host->base + reg); + dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__, + host->base, reg, data); + return data; +} + +static u16 usdhi6_read16(struct usdhi6_host *host, u32 reg) +{ + u16 data = ioread16(host->base + reg); + dev_vdbg(mmc_dev(host->mmc), "%s(0x%p + 0x%x) = 0x%x\n", __func__, + host->base, reg, data); + return data; +} + +static void usdhi6_irq_enable(struct usdhi6_host *host, u32 info1, u32 info2) +{ + host->status_mask = USDHI6_SD_INFO1_IRQ & ~info1; + host->status2_mask = USDHI6_SD_INFO2_IRQ & ~info2; + usdhi6_write(host, USDHI6_SD_INFO1_MASK, host->status_mask); + usdhi6_write(host, USDHI6_SD_INFO2_MASK, host->status2_mask); +} + +static void usdhi6_wait_for_resp(struct usdhi6_host *host) +{ + usdhi6_irq_enable(host, USDHI6_SD_INFO1_RSP_END | + USDHI6_SD_INFO1_ACCESS_END | USDHI6_SD_INFO1_CARD_CD, + USDHI6_SD_INFO2_ERR); +} + +static void usdhi6_wait_for_brwe(struct usdhi6_host *host, bool read) +{ + usdhi6_irq_enable(host, USDHI6_SD_INFO1_ACCESS_END | + USDHI6_SD_INFO1_CARD_CD, USDHI6_SD_INFO2_ERR | + (read ? USDHI6_SD_INFO2_BRE : USDHI6_SD_INFO2_BWE)); +} + +static void usdhi6_only_cd(struct usdhi6_host *host) +{ + /* Mask all except card hotplug */ + usdhi6_irq_enable(host, USDHI6_SD_INFO1_CARD_CD, 0); +} + +static void usdhi6_mask_all(struct usdhi6_host *host) +{ + usdhi6_irq_enable(host, 0, 0); +} + +static int usdhi6_error_code(struct usdhi6_host *host) +{ + u32 err; + + usdhi6_write(host, USDHI6_SD_STOP, USDHI6_SD_STOP_STP); + + if (host->io_error & + (USDHI6_SD_INFO2_RSP_TOUT | USDHI6_SD_INFO2_TOUT)) { + u32 rsp54 = usdhi6_read(host, USDHI6_SD_RSP54); + int opc = host->mrq ? host->mrq->cmd->opcode : -1; + + err = usdhi6_read(host, USDHI6_SD_ERR_STS2); + /* Response timeout is often normal, don't spam the log */ + if (host->wait == USDHI6_WAIT_FOR_CMD) + dev_dbg(mmc_dev(host->mmc), + "T-out sts 0x%x, resp 0x%x, state %u, CMD%d\n", + err, rsp54, host->wait, opc); + else + dev_warn(mmc_dev(host->mmc), + "T-out sts 0x%x, resp 0x%x, state %u, CMD%d\n", + err, rsp54, host->wait, opc); + return -ETIMEDOUT; + } + + err = usdhi6_read(host, USDHI6_SD_ERR_STS1); + if (err != USDHI6_SD_ERR_STS1_CRC_NO_ERROR) + dev_warn(mmc_dev(host->mmc), "Err sts 0x%x, state %u, CMD%d\n", + err, host->wait, host->mrq ? host->mrq->cmd->opcode : -1); + if (host->io_error & USDHI6_SD_INFO2_ILA) + return -EILSEQ; + + return -EIO; +} + +/* Scatter-Gather management */ + +/* + * In PIO mode we have to map each page separately, using kmap(). That way + * adjacent pages are mapped to non-adjacent virtual addresses. That's why we + * have to use a bounce buffer for blocks, crossing page boundaries. Such blocks + * have been observed with an SDIO WiFi card (b43 driver). + */ +static void usdhi6_blk_bounce(struct usdhi6_host *host, + struct scatterlist *sg) +{ + struct mmc_data *data = host->mrq->data; + size_t blk_head = host->head_len; + + dev_dbg(mmc_dev(host->mmc), "%s(): CMD%u of %u SG: %ux%u @ 0x%x\n", + __func__, host->mrq->cmd->opcode, data->sg_len, + data->blksz, data->blocks, sg->offset); + + host->head_pg.page = host->pg.page; + host->head_pg.mapped = host->pg.mapped; + host->pg.page = nth_page(host->pg.page, 1); + host->pg.mapped = kmap(host->pg.page); + + host->blk_page = host->bounce_buf; + host->offset = 0; + + if (data->flags & MMC_DATA_READ) + return; + + memcpy(host->bounce_buf, host->head_pg.mapped + PAGE_SIZE - blk_head, + blk_head); + memcpy(host->bounce_buf + blk_head, host->pg.mapped, + data->blksz - blk_head); +} + +/* Only called for multiple block IO */ +static void usdhi6_sg_prep(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_data *data = mrq->data; + + usdhi6_write(host, USDHI6_SD_SECCNT, data->blocks); + + host->sg = data->sg; + /* TODO: if we always map, this is redundant */ + host->offset = host->sg->offset; +} + +/* Map the first page in an SG segment: common for multiple and single block IO */ +static void *usdhi6_sg_map(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + struct scatterlist *sg = data->sg_len > 1 ? host->sg : data->sg; + size_t head = PAGE_SIZE - sg->offset; + size_t blk_head = head % data->blksz; + + WARN(host->pg.page, "%p not properly unmapped!\n", host->pg.page); + if (WARN(sg_dma_len(sg) % data->blksz, + "SG size %zd isn't a multiple of block size %zd\n", + sg_dma_len(sg), data->blksz)) + return NULL; + + host->pg.page = sg_page(sg); + host->pg.mapped = kmap(host->pg.page); + host->offset = sg->offset; + + /* + * Block size must be a power of 2 for multi-block transfers, + * therefore blk_head is equal for all pages in this SG + */ + host->head_len = blk_head; + + if (head < data->blksz) + /* + * The first block in the SG crosses a page boundary. + * Max blksz = 512, so blocks can only span 2 pages + */ + usdhi6_blk_bounce(host, sg); + else + host->blk_page = host->pg.mapped; + + dev_dbg(mmc_dev(host->mmc), "Mapped %p (%lx) at %p + %u for CMD%u @ 0x%p\n", + host->pg.page, page_to_pfn(host->pg.page), host->pg.mapped, + sg->offset, host->mrq->cmd->opcode, host->mrq); + + return host->blk_page + host->offset; +} + +/* Unmap the current page: common for multiple and single block IO */ +static void usdhi6_sg_unmap(struct usdhi6_host *host, bool force) +{ + struct mmc_data *data = host->mrq->data; + struct page *page = host->head_pg.page; + + if (page) { + /* Previous block was cross-page boundary */ + struct scatterlist *sg = data->sg_len > 1 ? + host->sg : data->sg; + size_t blk_head = host->head_len; + + if (!data->error && data->flags & MMC_DATA_READ) { + memcpy(host->head_pg.mapped + PAGE_SIZE - blk_head, + host->bounce_buf, blk_head); + memcpy(host->pg.mapped, host->bounce_buf + blk_head, + data->blksz - blk_head); + } + + flush_dcache_page(page); + kunmap(page); + + host->head_pg.page = NULL; + + if (!force && sg_dma_len(sg) + sg->offset > + (host->page_idx << PAGE_SHIFT) + data->blksz - blk_head) + /* More blocks in this SG, don't unmap the next page */ + return; + } + + page = host->pg.page; + if (!page) + return; + + flush_dcache_page(page); + kunmap(page); + + host->pg.page = NULL; +} + +/* Called from MMC_WRITE_MULTIPLE_BLOCK or MMC_READ_MULTIPLE_BLOCK */ +static void usdhi6_sg_advance(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + size_t done, total; + + /* New offset: set at the end of the previous block */ + if (host->head_pg.page) { + /* Finished a cross-page block, jump to the new page */ + host->page_idx++; + host->offset = data->blksz - host->head_len; + host->blk_page = host->pg.mapped; + usdhi6_sg_unmap(host, false); + } else { + host->offset += data->blksz; + /* The completed block didn't cross a page boundary */ + if (host->offset == PAGE_SIZE) { + /* If required, we'll map the page below */ + host->offset = 0; + host->page_idx++; + } + } + + /* + * Now host->blk_page + host->offset point at the end of our last block + * and host->page_idx is the index of the page, in which our new block + * is located, if any + */ + + done = (host->page_idx << PAGE_SHIFT) + host->offset; + total = host->sg->offset + sg_dma_len(host->sg); + + dev_dbg(mmc_dev(host->mmc), "%s(): %zu of %zu @ %u\n", __func__, + done, total, host->offset); + + if (done < total && host->offset) { + /* More blocks in this page */ + if (host->offset + data->blksz > PAGE_SIZE) + /* We approached at a block, that spans 2 pages */ + usdhi6_blk_bounce(host, host->sg); + + return; + } + + /* Finished current page or an SG segment */ + usdhi6_sg_unmap(host, false); + + if (done == total) { + /* + * End of an SG segment or the complete SG: jump to the next + * segment, we'll map it later in usdhi6_blk_read() or + * usdhi6_blk_write() + */ + struct scatterlist *next = sg_next(host->sg); + + host->page_idx = 0; + + if (!next) + host->wait = USDHI6_WAIT_FOR_DATA_END; + host->sg = next; + + if (WARN(next && sg_dma_len(next) % data->blksz, + "SG size %zd isn't a multiple of block size %zd\n", + sg_dma_len(next), data->blksz)) + data->error = -EINVAL; + + return; + } + + /* We cannot get here after crossing a page border */ + + /* Next page in the same SG */ + host->pg.page = nth_page(sg_page(host->sg), host->page_idx); + host->pg.mapped = kmap(host->pg.page); + host->blk_page = host->pg.mapped; + + dev_dbg(mmc_dev(host->mmc), "Mapped %p (%lx) at %p for CMD%u @ 0x%p\n", + host->pg.page, page_to_pfn(host->pg.page), host->pg.mapped, + host->mrq->cmd->opcode, host->mrq); +} + +/* DMA handling */ + +static void usdhi6_dma_release(struct usdhi6_host *host) +{ + host->dma_active = false; + if (host->chan_tx) { + struct dma_chan *chan = host->chan_tx; + host->chan_tx = NULL; + dma_release_channel(chan); + } + if (host->chan_rx) { + struct dma_chan *chan = host->chan_rx; + host->chan_rx = NULL; + dma_release_channel(chan); + } +} + +static void usdhi6_dma_stop_unmap(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + + if (!host->dma_active) + return; + + usdhi6_write(host, USDHI6_CC_EXT_MODE, 0); + host->dma_active = false; + + if (data->flags & MMC_DATA_READ) + dma_unmap_sg(host->chan_rx->device->dev, data->sg, + data->sg_len, DMA_FROM_DEVICE); + else + dma_unmap_sg(host->chan_tx->device->dev, data->sg, + data->sg_len, DMA_TO_DEVICE); +} + +static void usdhi6_dma_complete(void *arg) +{ + struct usdhi6_host *host = arg; + struct mmc_request *mrq = host->mrq; + + if (WARN(!mrq || !mrq->data, "%s: NULL data in DMA completion for %p!\n", + dev_name(mmc_dev(host->mmc)), mrq)) + return; + + dev_dbg(mmc_dev(host->mmc), "%s(): CMD%u DMA completed\n", __func__, + mrq->cmd->opcode); + + usdhi6_dma_stop_unmap(host); + usdhi6_wait_for_brwe(host, mrq->data->flags & MMC_DATA_READ); +} + +static int usdhi6_dma_setup(struct usdhi6_host *host, struct dma_chan *chan, + enum dma_transfer_direction dir) +{ + struct mmc_data *data = host->mrq->data; + struct scatterlist *sg = data->sg; + struct dma_async_tx_descriptor *desc = NULL; + dma_cookie_t cookie = -EINVAL; + enum dma_data_direction data_dir; + int ret; + + switch (dir) { + case DMA_MEM_TO_DEV: + data_dir = DMA_TO_DEVICE; + break; + case DMA_DEV_TO_MEM: + data_dir = DMA_FROM_DEVICE; + break; + default: + return -EINVAL; + } + + ret = dma_map_sg(chan->device->dev, sg, data->sg_len, data_dir); + if (ret > 0) { + host->dma_active = true; + desc = dmaengine_prep_slave_sg(chan, sg, ret, dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + } + + if (desc) { + desc->callback = usdhi6_dma_complete; + desc->callback_param = host; + cookie = dmaengine_submit(desc); + } + + dev_dbg(mmc_dev(host->mmc), "%s(): mapped %d -> %d, cookie %d @ %p\n", + __func__, data->sg_len, ret, cookie, desc); + + if (cookie < 0) { + /* DMA failed, fall back to PIO */ + if (ret >= 0) + ret = cookie; + usdhi6_dma_release(host); + dev_warn(mmc_dev(host->mmc), + "DMA failed: %d, falling back to PIO\n", ret); + } + + return cookie; +} + +static int usdhi6_dma_start(struct usdhi6_host *host) +{ + if (!host->chan_rx || !host->chan_tx) + return -ENODEV; + + if (host->mrq->data->flags & MMC_DATA_READ) + return usdhi6_dma_setup(host, host->chan_rx, DMA_DEV_TO_MEM); + + return usdhi6_dma_setup(host, host->chan_tx, DMA_MEM_TO_DEV); +} + +static void usdhi6_dma_kill(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + + dev_dbg(mmc_dev(host->mmc), "%s(): SG of %u: %ux%u\n", + __func__, data->sg_len, data->blocks, data->blksz); + /* Abort DMA */ + if (data->flags & MMC_DATA_READ) + dmaengine_terminate_all(host->chan_rx); + else + dmaengine_terminate_all(host->chan_tx); +} + +static void usdhi6_dma_check_error(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + + dev_dbg(mmc_dev(host->mmc), "%s(): IO error %d, status 0x%x\n", + __func__, host->io_error, usdhi6_read(host, USDHI6_SD_INFO1)); + + if (host->io_error) { + data->error = usdhi6_error_code(host); + data->bytes_xfered = 0; + usdhi6_dma_kill(host); + usdhi6_dma_release(host); + dev_warn(mmc_dev(host->mmc), + "DMA failed: %d, falling back to PIO\n", data->error); + return; + } + + /* + * The datasheet tells us to check a response from the card, whereas + * responses only come after the command phase, not after the data + * phase. Let's check anyway. + */ + if (host->irq_status & USDHI6_SD_INFO1_RSP_END) + dev_warn(mmc_dev(host->mmc), "Unexpected response received!\n"); +} + +static void usdhi6_dma_kick(struct usdhi6_host *host) +{ + if (host->mrq->data->flags & MMC_DATA_READ) + dma_async_issue_pending(host->chan_rx); + else + dma_async_issue_pending(host->chan_tx); +} + +static void usdhi6_dma_request(struct usdhi6_host *host, phys_addr_t start) +{ + struct dma_slave_config cfg = { + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + }; + int ret; + + host->chan_tx = dma_request_slave_channel(mmc_dev(host->mmc), "tx"); + dev_dbg(mmc_dev(host->mmc), "%s: TX: got channel %p\n", __func__, + host->chan_tx); + + if (!host->chan_tx) + return; + + cfg.direction = DMA_MEM_TO_DEV; + cfg.dst_addr = start + USDHI6_SD_BUF0; + cfg.dst_maxburst = 128; /* 128 words * 4 bytes = 512 bytes */ + cfg.src_addr = 0; + ret = dmaengine_slave_config(host->chan_tx, &cfg); + if (ret < 0) + goto e_release_tx; + + host->chan_rx = dma_request_slave_channel(mmc_dev(host->mmc), "rx"); + dev_dbg(mmc_dev(host->mmc), "%s: RX: got channel %p\n", __func__, + host->chan_rx); + + if (!host->chan_rx) + goto e_release_tx; + + cfg.direction = DMA_DEV_TO_MEM; + cfg.src_addr = cfg.dst_addr; + cfg.src_maxburst = 128; /* 128 words * 4 bytes = 512 bytes */ + cfg.dst_addr = 0; + ret = dmaengine_slave_config(host->chan_rx, &cfg); + if (ret < 0) + goto e_release_rx; + + return; + +e_release_rx: + dma_release_channel(host->chan_rx); + host->chan_rx = NULL; +e_release_tx: + dma_release_channel(host->chan_tx); + host->chan_tx = NULL; +} + +/* API helpers */ + +static void usdhi6_clk_set(struct usdhi6_host *host, struct mmc_ios *ios) +{ + unsigned long rate = ios->clock; + u32 val; + unsigned int i; + + for (i = 1000; i; i--) { + if (usdhi6_read(host, USDHI6_SD_INFO2) & USDHI6_SD_INFO2_SCLKDIVEN) + break; + usleep_range(10, 100); + } + + if (!i) { + dev_err(mmc_dev(host->mmc), "SD bus busy, clock set aborted\n"); + return; + } + + val = usdhi6_read(host, USDHI6_SD_CLK_CTRL) & ~USDHI6_SD_CLK_CTRL_DIV_MASK; + + if (rate) { + unsigned long new_rate; + + if (host->imclk <= rate) { + if (ios->timing != MMC_TIMING_UHS_DDR50) { + /* Cannot have 1-to-1 clock in DDR mode */ + new_rate = host->imclk; + val |= 0xff; + } else { + new_rate = host->imclk / 2; + } + } else { + unsigned long div = + roundup_pow_of_two(DIV_ROUND_UP(host->imclk, rate)); + val |= div >> 2; + new_rate = host->imclk / div; + } + + if (host->rate == new_rate) + return; + + host->rate = new_rate; + + dev_dbg(mmc_dev(host->mmc), "target %lu, div %u, set %lu\n", + rate, (val & 0xff) << 2, new_rate); + } + + /* + * if old or new rate is equal to input rate, have to switch the clock + * off before changing and on after + */ + if (host->imclk == rate || host->imclk == host->rate || !rate) + usdhi6_write(host, USDHI6_SD_CLK_CTRL, + val & ~USDHI6_SD_CLK_CTRL_SCLKEN); + + if (!rate) { + host->rate = 0; + return; + } + + usdhi6_write(host, USDHI6_SD_CLK_CTRL, val); + + if (host->imclk == rate || host->imclk == host->rate || + !(val & USDHI6_SD_CLK_CTRL_SCLKEN)) + usdhi6_write(host, USDHI6_SD_CLK_CTRL, + val | USDHI6_SD_CLK_CTRL_SCLKEN); +} + +static void usdhi6_set_power(struct usdhi6_host *host, struct mmc_ios *ios) +{ + struct mmc_host *mmc = host->mmc; + + if (!IS_ERR(mmc->supply.vmmc)) + /* Errors ignored... */ + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, + ios->power_mode ? ios->vdd : 0); +} + +static int usdhi6_reset(struct usdhi6_host *host) +{ + int i; + + usdhi6_write(host, USDHI6_SOFT_RST, USDHI6_SOFT_RST_RESERVED); + cpu_relax(); + usdhi6_write(host, USDHI6_SOFT_RST, USDHI6_SOFT_RST_RESERVED | USDHI6_SOFT_RST_RESET); + for (i = 1000; i; i--) + if (usdhi6_read(host, USDHI6_SOFT_RST) & USDHI6_SOFT_RST_RESET) + break; + + return i ? 0 : -ETIMEDOUT; +} + +static void usdhi6_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct usdhi6_host *host = mmc_priv(mmc); + u32 option, mode; + int ret; + + dev_dbg(mmc_dev(mmc), "%uHz, OCR: %u, power %u, bus-width %u, timing %u\n", + ios->clock, ios->vdd, ios->power_mode, ios->bus_width, ios->timing); + + switch (ios->power_mode) { + case MMC_POWER_OFF: + usdhi6_set_power(host, ios); + usdhi6_only_cd(host); + break; + case MMC_POWER_UP: + /* + * We only also touch USDHI6_SD_OPTION from .request(), which + * cannot race with MMC_POWER_UP + */ + ret = usdhi6_reset(host); + if (ret < 0) { + dev_err(mmc_dev(mmc), "Cannot reset the interface!\n"); + } else { + usdhi6_set_power(host, ios); + usdhi6_only_cd(host); + } + break; + case MMC_POWER_ON: + option = usdhi6_read(host, USDHI6_SD_OPTION); + /* + * The eMMC standard only allows 4 or 8 bits in the DDR mode, + * the same probably holds for SD cards. We check here anyway, + * since the datasheet explicitly requires 4 bits for DDR. + */ + if (ios->bus_width == MMC_BUS_WIDTH_1) { + if (ios->timing == MMC_TIMING_UHS_DDR50) + dev_err(mmc_dev(mmc), + "4 bits are required for DDR\n"); + option |= USDHI6_SD_OPTION_WIDTH_1; + mode = 0; + } else { + option &= ~USDHI6_SD_OPTION_WIDTH_1; + mode = ios->timing == MMC_TIMING_UHS_DDR50; + } + usdhi6_write(host, USDHI6_SD_OPTION, option); + usdhi6_write(host, USDHI6_SDIF_MODE, mode); + break; + } + + if (host->rate != ios->clock) + usdhi6_clk_set(host, ios); +} + +/* This is data timeout. Response timeout is fixed to 640 clock cycles */ +static void usdhi6_timeout_set(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + u32 val; + unsigned long ticks; + + if (!mrq->data) + ticks = host->rate / 1000 * mrq->cmd->busy_timeout; + else + ticks = host->rate / 1000000 * (mrq->data->timeout_ns / 1000) + + mrq->data->timeout_clks; + + if (!ticks || ticks > 1 << 27) + /* Max timeout */ + val = 14; + else if (ticks < 1 << 13) + /* Min timeout */ + val = 0; + else + val = order_base_2(ticks) - 13; + + dev_dbg(mmc_dev(host->mmc), "Set %s timeout %lu ticks @ %lu Hz\n", + mrq->data ? "data" : "cmd", ticks, host->rate); + + /* Timeout Counter mask: 0xf0 */ + usdhi6_write(host, USDHI6_SD_OPTION, (val << USDHI6_SD_OPTION_TIMEOUT_SHIFT) | + (usdhi6_read(host, USDHI6_SD_OPTION) & ~USDHI6_SD_OPTION_TIMEOUT_MASK)); +} + +static void usdhi6_request_done(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_data *data = mrq->data; + + if (WARN(host->pg.page || host->head_pg.page, + "Page %p or %p not unmapped: wait %u, CMD%d(%c) @ +0x%x %ux%u in SG%u!\n", + host->pg.page, host->head_pg.page, host->wait, mrq->cmd->opcode, + data ? (data->flags & MMC_DATA_READ ? 'R' : 'W') : '-', + data ? host->offset : 0, data ? data->blocks : 0, + data ? data->blksz : 0, data ? data->sg_len : 0)) + usdhi6_sg_unmap(host, true); + + if (mrq->cmd->error || + (data && data->error) || + (mrq->stop && mrq->stop->error)) + dev_dbg(mmc_dev(host->mmc), "%s(CMD%d: %ux%u): err %d %d %d\n", + __func__, mrq->cmd->opcode, data ? data->blocks : 0, + data ? data->blksz : 0, + mrq->cmd->error, + data ? data->error : 1, + mrq->stop ? mrq->stop->error : 1); + + /* Disable DMA */ + usdhi6_write(host, USDHI6_CC_EXT_MODE, 0); + host->wait = USDHI6_WAIT_FOR_REQUEST; + host->mrq = NULL; + + mmc_request_done(host->mmc, mrq); +} + +static int usdhi6_cmd_flags(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = mrq->cmd; + u16 opc = cmd->opcode; + + if (host->app_cmd) { + host->app_cmd = false; + opc |= USDHI6_SD_CMD_APP; + } + + if (mrq->data) { + opc |= USDHI6_SD_CMD_DATA; + + if (mrq->data->flags & MMC_DATA_READ) + opc |= USDHI6_SD_CMD_READ; + + if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK || + (cmd->opcode == SD_IO_RW_EXTENDED && + mrq->data->blocks > 1)) { + opc |= USDHI6_SD_CMD_MULTI; + if (!mrq->stop) + opc |= USDHI6_SD_CMD_CMD12_AUTO_OFF; + } + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: + opc |= USDHI6_SD_CMD_MODE_RSP_NONE; + break; + case MMC_RSP_R1: + opc |= USDHI6_SD_CMD_MODE_RSP_R1; + break; + case MMC_RSP_R1B: + opc |= USDHI6_SD_CMD_MODE_RSP_R1B; + break; + case MMC_RSP_R2: + opc |= USDHI6_SD_CMD_MODE_RSP_R2; + break; + case MMC_RSP_R3: + opc |= USDHI6_SD_CMD_MODE_RSP_R3; + break; + default: + dev_warn(mmc_dev(host->mmc), + "Unknown response type %d\n", + mmc_resp_type(cmd)); + return -EINVAL; + } + } + + return opc; +} + +static int usdhi6_rq_start(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + int opc = usdhi6_cmd_flags(host); + int i; + + if (opc < 0) + return opc; + + for (i = 1000; i; i--) { + if (!(usdhi6_read(host, USDHI6_SD_INFO2) & USDHI6_SD_INFO2_CBSY)) + break; + usleep_range(10, 100); + } + + if (!i) { + dev_dbg(mmc_dev(host->mmc), "Command active, request aborted\n"); + return -EAGAIN; + } + + if (data) { + bool use_dma; + int ret = 0; + + host->page_idx = 0; + + if (cmd->opcode == SD_IO_RW_EXTENDED && data->blocks > 1) { + switch (data->blksz) { + case 512: + break; + case 32: + case 64: + case 128: + case 256: + if (mrq->stop) + ret = -EINVAL; + break; + default: + ret = -EINVAL; + } + } else if ((cmd->opcode == MMC_READ_MULTIPLE_BLOCK || + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) && + data->blksz != 512) { + ret = -EINVAL; + } + + if (ret < 0) { + dev_warn(mmc_dev(host->mmc), "%s(): %u blocks of %u bytes\n", + __func__, data->blocks, data->blksz); + return -EINVAL; + } + + if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK || + (cmd->opcode == SD_IO_RW_EXTENDED && + data->blocks > 1)) + usdhi6_sg_prep(host); + + usdhi6_write(host, USDHI6_SD_SIZE, data->blksz); + + if ((data->blksz >= USDHI6_MIN_DMA || + data->blocks > 1) && + (data->blksz % 4 || + data->sg->offset % 4)) + dev_dbg(mmc_dev(host->mmc), + "Bad SG of %u: %ux%u @ %u\n", data->sg_len, + data->blksz, data->blocks, data->sg->offset); + + /* Enable DMA for USDHI6_MIN_DMA bytes or more */ + use_dma = data->blksz >= USDHI6_MIN_DMA && + !(data->blksz % 4) && + usdhi6_dma_start(host) >= DMA_MIN_COOKIE; + + if (use_dma) + usdhi6_write(host, USDHI6_CC_EXT_MODE, USDHI6_CC_EXT_MODE_SDRW); + + dev_dbg(mmc_dev(host->mmc), + "%s(): request opcode %u, %u blocks of %u bytes in %u segments, %s %s @+0x%x%s\n", + __func__, cmd->opcode, data->blocks, data->blksz, + data->sg_len, use_dma ? "DMA" : "PIO", + data->flags & MMC_DATA_READ ? "read" : "write", + data->sg->offset, mrq->stop ? " + stop" : ""); + } else { + dev_dbg(mmc_dev(host->mmc), "%s(): request opcode %u\n", + __func__, cmd->opcode); + } + + /* We have to get a command completion interrupt with DMA too */ + usdhi6_wait_for_resp(host); + + host->wait = USDHI6_WAIT_FOR_CMD; + schedule_delayed_work(&host->timeout_work, host->timeout); + + /* SEC bit is required to enable block counting by the core */ + usdhi6_write(host, USDHI6_SD_STOP, + data && data->blocks > 1 ? USDHI6_SD_STOP_SEC : 0); + usdhi6_write(host, USDHI6_SD_ARG, cmd->arg); + + /* Kick command execution */ + usdhi6_write(host, USDHI6_SD_CMD, opc); + + return 0; +} + +static void usdhi6_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct usdhi6_host *host = mmc_priv(mmc); + int ret; + + cancel_delayed_work_sync(&host->timeout_work); + + host->mrq = mrq; + host->sg = NULL; + + usdhi6_timeout_set(host); + ret = usdhi6_rq_start(host); + if (ret < 0) { + mrq->cmd->error = ret; + usdhi6_request_done(host); + } +} + +static int usdhi6_get_cd(struct mmc_host *mmc) +{ + struct usdhi6_host *host = mmc_priv(mmc); + /* Read is atomic, no need to lock */ + u32 status = usdhi6_read(host, USDHI6_SD_INFO1) & USDHI6_SD_INFO1_CD; + +/* + * level status.CD CD_ACTIVE_HIGH card present + * 1 0 0 0 + * 1 0 1 1 + * 0 1 0 1 + * 0 1 1 0 + */ + return !status ^ !(mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH); +} + +static int usdhi6_get_ro(struct mmc_host *mmc) +{ + struct usdhi6_host *host = mmc_priv(mmc); + /* No locking as above */ + u32 status = usdhi6_read(host, USDHI6_SD_INFO1) & USDHI6_SD_INFO1_WP; + +/* + * level status.WP RO_ACTIVE_HIGH card read-only + * 1 0 0 0 + * 1 0 1 1 + * 0 1 0 1 + * 0 1 1 0 + */ + return !status ^ !(mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH); +} + +static void usdhi6_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct usdhi6_host *host = mmc_priv(mmc); + + dev_dbg(mmc_dev(mmc), "%s(): %sable\n", __func__, enable ? "en" : "dis"); + + if (enable) { + host->sdio_mask = USDHI6_SDIO_INFO1_IRQ & ~USDHI6_SDIO_INFO1_IOIRQ; + usdhi6_write(host, USDHI6_SDIO_INFO1_MASK, host->sdio_mask); + usdhi6_write(host, USDHI6_SDIO_MODE, 1); + } else { + usdhi6_write(host, USDHI6_SDIO_MODE, 0); + usdhi6_write(host, USDHI6_SDIO_INFO1_MASK, USDHI6_SDIO_INFO1_IRQ); + host->sdio_mask = USDHI6_SDIO_INFO1_IRQ; + } +} + +static struct mmc_host_ops usdhi6_ops = { + .request = usdhi6_request, + .set_ios = usdhi6_set_ios, + .get_cd = usdhi6_get_cd, + .get_ro = usdhi6_get_ro, + .enable_sdio_irq = usdhi6_enable_sdio_irq, +}; + +/* State machine handlers */ + +static void usdhi6_resp_cmd12(struct usdhi6_host *host) +{ + struct mmc_command *cmd = host->mrq->stop; + cmd->resp[0] = usdhi6_read(host, USDHI6_SD_RSP10); +} + +static void usdhi6_resp_read(struct usdhi6_host *host) +{ + struct mmc_command *cmd = host->mrq->cmd; + u32 *rsp = cmd->resp, tmp = 0; + int i; + +/* + * RSP10 39-8 + * RSP32 71-40 + * RSP54 103-72 + * RSP76 127-104 + * R2-type response: + * resp[0] = r[127..96] + * resp[1] = r[95..64] + * resp[2] = r[63..32] + * resp[3] = r[31..0] + * Other responses: + * resp[0] = r[39..8] + */ + + if (mmc_resp_type(cmd) == MMC_RSP_NONE) + return; + + if (!(host->irq_status & USDHI6_SD_INFO1_RSP_END)) { + dev_err(mmc_dev(host->mmc), + "CMD%d: response expected but is missing!\n", cmd->opcode); + return; + } + + if (mmc_resp_type(cmd) & MMC_RSP_136) + for (i = 0; i < 4; i++) { + if (i) + rsp[3 - i] = tmp >> 24; + tmp = usdhi6_read(host, USDHI6_SD_RSP10 + i * 8); + rsp[3 - i] |= tmp << 8; + } + else if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || + cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) + /* Read RSP54 to avoid conflict with auto CMD12 */ + rsp[0] = usdhi6_read(host, USDHI6_SD_RSP54); + else + rsp[0] = usdhi6_read(host, USDHI6_SD_RSP10); + + dev_dbg(mmc_dev(host->mmc), "Response 0x%x\n", rsp[0]); +} + +static int usdhi6_blk_read(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + u32 *p; + int i, rest; + + if (host->io_error) { + data->error = usdhi6_error_code(host); + goto error; + } + + if (host->pg.page) { + p = host->blk_page + host->offset; + } else { + p = usdhi6_sg_map(host); + if (!p) { + data->error = -ENOMEM; + goto error; + } + } + + for (i = 0; i < data->blksz / 4; i++, p++) + *p = usdhi6_read(host, USDHI6_SD_BUF0); + + rest = data->blksz % 4; + for (i = 0; i < (rest + 1) / 2; i++) { + u16 d = usdhi6_read16(host, USDHI6_SD_BUF0); + ((u8 *)p)[2 * i] = ((u8 *)&d)[0]; + if (rest > 1 && !i) + ((u8 *)p)[2 * i + 1] = ((u8 *)&d)[1]; + } + + return 0; + +error: + dev_dbg(mmc_dev(host->mmc), "%s(): %d\n", __func__, data->error); + host->wait = USDHI6_WAIT_FOR_REQUEST; + return data->error; +} + +static int usdhi6_blk_write(struct usdhi6_host *host) +{ + struct mmc_data *data = host->mrq->data; + u32 *p; + int i, rest; + + if (host->io_error) { + data->error = usdhi6_error_code(host); + goto error; + } + + if (host->pg.page) { + p = host->blk_page + host->offset; + } else { + p = usdhi6_sg_map(host); + if (!p) { + data->error = -ENOMEM; + goto error; + } + } + + for (i = 0; i < data->blksz / 4; i++, p++) + usdhi6_write(host, USDHI6_SD_BUF0, *p); + + rest = data->blksz % 4; + for (i = 0; i < (rest + 1) / 2; i++) { + u16 d; + ((u8 *)&d)[0] = ((u8 *)p)[2 * i]; + if (rest > 1 && !i) + ((u8 *)&d)[1] = ((u8 *)p)[2 * i + 1]; + else + ((u8 *)&d)[1] = 0; + usdhi6_write16(host, USDHI6_SD_BUF0, d); + } + + return 0; + +error: + dev_dbg(mmc_dev(host->mmc), "%s(): %d\n", __func__, data->error); + host->wait = USDHI6_WAIT_FOR_REQUEST; + return data->error; +} + +static int usdhi6_stop_cmd(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + + switch (mrq->cmd->opcode) { + case MMC_READ_MULTIPLE_BLOCK: + case MMC_WRITE_MULTIPLE_BLOCK: + if (mrq->stop->opcode == MMC_STOP_TRANSMISSION) { + host->wait = USDHI6_WAIT_FOR_STOP; + return 0; + } + /* Unsupported STOP command */ + default: + dev_err(mmc_dev(host->mmc), + "unsupported stop CMD%d for CMD%d\n", + mrq->stop->opcode, mrq->cmd->opcode); + mrq->stop->error = -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + +static bool usdhi6_end_cmd(struct usdhi6_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = mrq->cmd; + + if (host->io_error) { + cmd->error = usdhi6_error_code(host); + return false; + } + + usdhi6_resp_read(host); + + if (!mrq->data) + return false; + + if (host->dma_active) { + usdhi6_dma_kick(host); + if (!mrq->stop) + host->wait = USDHI6_WAIT_FOR_DMA; + else if (usdhi6_stop_cmd(host) < 0) + return false; + } else if (mrq->data->flags & MMC_DATA_READ) { + if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || + (cmd->opcode == SD_IO_RW_EXTENDED && + mrq->data->blocks > 1)) + host->wait = USDHI6_WAIT_FOR_MREAD; + else + host->wait = USDHI6_WAIT_FOR_READ; + } else { + if (cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK || + (cmd->opcode == SD_IO_RW_EXTENDED && + mrq->data->blocks > 1)) + host->wait = USDHI6_WAIT_FOR_MWRITE; + else + host->wait = USDHI6_WAIT_FOR_WRITE; + } + + return true; +} + +static bool usdhi6_read_block(struct usdhi6_host *host) +{ + /* ACCESS_END IRQ is already unmasked */ + int ret = usdhi6_blk_read(host); + + /* + * Have to force unmapping both pages: the single block could have been + * cross-page, in which case for single-block IO host->page_idx == 0. + * So, if we don't force, the second page won't be unmapped. + */ + usdhi6_sg_unmap(host, true); + + if (ret < 0) + return false; + + host->wait = USDHI6_WAIT_FOR_DATA_END; + return true; +} + +static bool usdhi6_mread_block(struct usdhi6_host *host) +{ + int ret = usdhi6_blk_read(host); + + if (ret < 0) + return false; + + usdhi6_sg_advance(host); + + return !host->mrq->data->error && + (host->wait != USDHI6_WAIT_FOR_DATA_END || !host->mrq->stop); +} + +static bool usdhi6_write_block(struct usdhi6_host *host) +{ + int ret = usdhi6_blk_write(host); + + /* See comment in usdhi6_read_block() */ + usdhi6_sg_unmap(host, true); + + if (ret < 0) + return false; + + host->wait = USDHI6_WAIT_FOR_DATA_END; + return true; +} + +static bool usdhi6_mwrite_block(struct usdhi6_host *host) +{ + int ret = usdhi6_blk_write(host); + + if (ret < 0) + return false; + + usdhi6_sg_advance(host); + + return !host->mrq->data->error && + (host->wait != USDHI6_WAIT_FOR_DATA_END || !host->mrq->stop); +} + +/* Interrupt & timeout handlers */ + +static irqreturn_t usdhi6_sd_bh(int irq, void *dev_id) +{ + struct usdhi6_host *host = dev_id; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + bool io_wait = false; + + cancel_delayed_work_sync(&host->timeout_work); + + mrq = host->mrq; + if (!mrq) + return IRQ_HANDLED; + + cmd = mrq->cmd; + data = mrq->data; + + switch (host->wait) { + case USDHI6_WAIT_FOR_REQUEST: + /* We're too late, the timeout has already kicked in */ + return IRQ_HANDLED; + case USDHI6_WAIT_FOR_CMD: + /* Wait for data? */ + io_wait = usdhi6_end_cmd(host); + break; + case USDHI6_WAIT_FOR_MREAD: + /* Wait for more data? */ + io_wait = usdhi6_mread_block(host); + break; + case USDHI6_WAIT_FOR_READ: + /* Wait for data end? */ + io_wait = usdhi6_read_block(host); + break; + case USDHI6_WAIT_FOR_MWRITE: + /* Wait data to write? */ + io_wait = usdhi6_mwrite_block(host); + break; + case USDHI6_WAIT_FOR_WRITE: + /* Wait for data end? */ + io_wait = usdhi6_write_block(host); + break; + case USDHI6_WAIT_FOR_DMA: + usdhi6_dma_check_error(host); + break; + case USDHI6_WAIT_FOR_STOP: + usdhi6_write(host, USDHI6_SD_STOP, 0); + if (host->io_error) { + int ret = usdhi6_error_code(host); + if (mrq->stop) + mrq->stop->error = ret; + else + mrq->data->error = ret; + dev_warn(mmc_dev(host->mmc), "%s(): %d\n", __func__, ret); + break; + } + usdhi6_resp_cmd12(host); + mrq->stop->error = 0; + break; + case USDHI6_WAIT_FOR_DATA_END: + if (host->io_error) { + mrq->data->error = usdhi6_error_code(host); + dev_warn(mmc_dev(host->mmc), "%s(): %d\n", __func__, + mrq->data->error); + } + break; + default: + cmd->error = -EFAULT; + dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait); + usdhi6_request_done(host); + return IRQ_HANDLED; + } + + if (io_wait) { + schedule_delayed_work(&host->timeout_work, host->timeout); + /* Wait for more data or ACCESS_END */ + if (!host->dma_active) + usdhi6_wait_for_brwe(host, mrq->data->flags & MMC_DATA_READ); + return IRQ_HANDLED; + } + + if (!cmd->error) { + if (data) { + if (!data->error) { + if (host->wait != USDHI6_WAIT_FOR_STOP && + host->mrq->stop && + !host->mrq->stop->error && + !usdhi6_stop_cmd(host)) { + /* Sending STOP */ + usdhi6_wait_for_resp(host); + + schedule_delayed_work(&host->timeout_work, + host->timeout); + + return IRQ_HANDLED; + } + + data->bytes_xfered = data->blocks * data->blksz; + } else { + /* Data error: might need to unmap the last page */ + dev_warn(mmc_dev(host->mmc), "%s(): data error %d\n", + __func__, data->error); + usdhi6_sg_unmap(host, true); + } + } else if (cmd->opcode == MMC_APP_CMD) { + host->app_cmd = true; + } + } + + usdhi6_request_done(host); + + return IRQ_HANDLED; +} + +static irqreturn_t usdhi6_sd(int irq, void *dev_id) +{ + struct usdhi6_host *host = dev_id; + u16 status, status2, error; + + status = usdhi6_read(host, USDHI6_SD_INFO1) & ~host->status_mask & + ~USDHI6_SD_INFO1_CARD; + status2 = usdhi6_read(host, USDHI6_SD_INFO2) & ~host->status2_mask; + + usdhi6_only_cd(host); + + dev_dbg(mmc_dev(host->mmc), + "IRQ status = 0x%08x, status2 = 0x%08x\n", status, status2); + + if (!status && !status2) + return IRQ_NONE; + + error = status2 & USDHI6_SD_INFO2_ERR; + + /* Ack / clear interrupts */ + if (USDHI6_SD_INFO1_IRQ & status) + usdhi6_write(host, USDHI6_SD_INFO1, + 0xffff & ~(USDHI6_SD_INFO1_IRQ & status)); + + if (USDHI6_SD_INFO2_IRQ & status2) { + if (error) + /* In error cases BWE and BRE aren't cleared automatically */ + status2 |= USDHI6_SD_INFO2_BWE | USDHI6_SD_INFO2_BRE; + + usdhi6_write(host, USDHI6_SD_INFO2, + 0xffff & ~(USDHI6_SD_INFO2_IRQ & status2)); + } + + host->io_error = error; + host->irq_status = status; + + if (error) { + /* Don't pollute the log with unsupported command timeouts */ + if (host->wait != USDHI6_WAIT_FOR_CMD || + error != USDHI6_SD_INFO2_RSP_TOUT) + dev_warn(mmc_dev(host->mmc), + "%s(): INFO2 error bits 0x%08x\n", + __func__, error); + else + dev_dbg(mmc_dev(host->mmc), + "%s(): INFO2 error bits 0x%08x\n", + __func__, error); + } + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t usdhi6_sdio(int irq, void *dev_id) +{ + struct usdhi6_host *host = dev_id; + u32 status = usdhi6_read(host, USDHI6_SDIO_INFO1) & ~host->sdio_mask; + + dev_dbg(mmc_dev(host->mmc), "%s(): status 0x%x\n", __func__, status); + + if (!status) + return IRQ_NONE; + + usdhi6_write(host, USDHI6_SDIO_INFO1, ~status); + + mmc_signal_sdio_irq(host->mmc); + + return IRQ_HANDLED; +} + +static irqreturn_t usdhi6_cd(int irq, void *dev_id) +{ + struct usdhi6_host *host = dev_id; + struct mmc_host *mmc = host->mmc; + u16 status; + + /* We're only interested in hotplug events here */ + status = usdhi6_read(host, USDHI6_SD_INFO1) & ~host->status_mask & + USDHI6_SD_INFO1_CARD; + + if (!status) + return IRQ_NONE; + + /* Ack */ + usdhi6_write(host, USDHI6_SD_INFO1, !status); + + if (!work_pending(&mmc->detect.work) && + (((status & USDHI6_SD_INFO1_CARD_INSERT) && + !mmc->card) || + ((status & USDHI6_SD_INFO1_CARD_EJECT) && + mmc->card))) + mmc_detect_change(mmc, msecs_to_jiffies(100)); + + return IRQ_HANDLED; +} + +/* + * Actually this should not be needed, if the built-in timeout works reliably in + * the both PIO cases and DMA never fails. But if DMA does fail, a timeout + * handler might be the only way to catch the error. + */ +static void usdhi6_timeout_work(struct work_struct *work) +{ + struct delayed_work *d = container_of(work, struct delayed_work, work); + struct usdhi6_host *host = container_of(d, struct usdhi6_host, timeout_work); + struct mmc_request *mrq = host->mrq; + struct mmc_data *data = mrq ? mrq->data : NULL; + + dev_warn(mmc_dev(host->mmc), + "%s timeout wait %u CMD%d: IRQ 0x%08x:0x%08x, last IRQ 0x%08x\n", + host->dma_active ? "DMA" : "PIO", + host->wait, mrq ? mrq->cmd->opcode : -1, + usdhi6_read(host, USDHI6_SD_INFO1), + usdhi6_read(host, USDHI6_SD_INFO2), host->irq_status); + + if (host->dma_active) { + usdhi6_dma_kill(host); + usdhi6_dma_stop_unmap(host); + } + + switch (host->wait) { + default: + dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait); + /* mrq can be NULL in this actually impossible case */ + case USDHI6_WAIT_FOR_CMD: + usdhi6_error_code(host); + if (mrq) + mrq->cmd->error = -ETIMEDOUT; + break; + case USDHI6_WAIT_FOR_STOP: + usdhi6_error_code(host); + mrq->stop->error = -ETIMEDOUT; + break; + case USDHI6_WAIT_FOR_DMA: + case USDHI6_WAIT_FOR_MREAD: + case USDHI6_WAIT_FOR_MWRITE: + case USDHI6_WAIT_FOR_READ: + case USDHI6_WAIT_FOR_WRITE: + dev_dbg(mmc_dev(host->mmc), + "%c: page #%u @ +0x%x %ux%u in SG%u. Current SG %u bytes @ %u\n", + data->flags & MMC_DATA_READ ? 'R' : 'W', host->page_idx, + host->offset, data->blocks, data->blksz, data->sg_len, + sg_dma_len(host->sg), host->sg->offset); + usdhi6_sg_unmap(host, true); + /* + * If USDHI6_WAIT_FOR_DATA_END times out, we have already unmapped + * the page + */ + case USDHI6_WAIT_FOR_DATA_END: + usdhi6_error_code(host); + data->error = -ETIMEDOUT; + } + + if (mrq) + usdhi6_request_done(host); +} + +/* Probe / release */ + +static const struct of_device_id usdhi6_of_match[] = { + {.compatible = "renesas,usdhi6rol0"}, + {} +}; +MODULE_DEVICE_TABLE(of, usdhi6_of_match); + +static int usdhi6_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mmc_host *mmc; + struct usdhi6_host *host; + struct resource *res; + int irq_cd, irq_sd, irq_sdio; + u32 version; + int ret; + + if (!dev->of_node) + return -ENODEV; + + irq_cd = platform_get_irq_byname(pdev, "card detect"); + irq_sd = platform_get_irq_byname(pdev, "data"); + irq_sdio = platform_get_irq_byname(pdev, "SDIO"); + if (irq_sd < 0 || irq_sdio < 0) + return -ENODEV; + + mmc = mmc_alloc_host(sizeof(struct usdhi6_host), dev); + if (!mmc) + return -ENOMEM; + + ret = mmc_of_parse(mmc); + if (ret < 0) + goto e_free_mmc; + + mmc_regulator_get_supply(mmc); + + host = mmc_priv(mmc); + host->mmc = mmc; + host->wait = USDHI6_WAIT_FOR_REQUEST; + host->timeout = msecs_to_jiffies(4000); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + host->base = devm_ioremap_resource(dev, res); + if (IS_ERR(host->base)) { + ret = PTR_ERR(host->base); + goto e_free_mmc; + } + + host->clk = devm_clk_get(dev, NULL); + if (IS_ERR(host->clk)) + goto e_free_mmc; + + host->imclk = clk_get_rate(host->clk); + + ret = clk_prepare_enable(host->clk); + if (ret < 0) + goto e_free_mmc; + + version = usdhi6_read(host, USDHI6_VERSION); + if ((version & 0xfff) != 0xa0d) { + dev_err(dev, "Version not recognized %x\n", version); + goto e_clk_off; + } + + dev_info(dev, "A USDHI6ROL0 SD host detected with %d ports\n", + usdhi6_read(host, USDHI6_SD_PORT_SEL) >> USDHI6_SD_PORT_SEL_PORTS_SHIFT); + + usdhi6_mask_all(host); + + if (irq_cd >= 0) { + ret = devm_request_irq(dev, irq_cd, usdhi6_cd, 0, + dev_name(dev), host); + if (ret < 0) + goto e_clk_off; + } else { + mmc->caps |= MMC_CAP_NEEDS_POLL; + } + + ret = devm_request_threaded_irq(dev, irq_sd, usdhi6_sd, usdhi6_sd_bh, 0, + dev_name(dev), host); + if (ret < 0) + goto e_clk_off; + + ret = devm_request_irq(dev, irq_sdio, usdhi6_sdio, 0, + dev_name(dev), host); + if (ret < 0) + goto e_clk_off; + + INIT_DELAYED_WORK(&host->timeout_work, usdhi6_timeout_work); + + usdhi6_dma_request(host, res->start); + + mmc->ops = &usdhi6_ops; + mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50 | MMC_CAP_SDIO_IRQ; + /* Set .max_segs to some random number. Feel free to adjust. */ + mmc->max_segs = 32; + mmc->max_blk_size = 512; + mmc->max_req_size = PAGE_CACHE_SIZE * mmc->max_segs; + mmc->max_blk_count = mmc->max_req_size / mmc->max_blk_size; + /* + * Setting .max_seg_size to 1 page would simplify our page-mapping code, + * But OTOH, having large segments makes DMA more efficient. We could + * check, whether we managed to get DMA and fall back to 1 page + * segments, but if we do manage to obtain DMA and then it fails at + * run-time and we fall back to PIO, we will continue getting large + * segments. So, we wouldn't be able to get rid of the code anyway. + */ + mmc->max_seg_size = mmc->max_req_size; + if (!mmc->f_max) + mmc->f_max = host->imclk; + mmc->f_min = host->imclk / 512; + + platform_set_drvdata(pdev, host); + + ret = mmc_add_host(mmc); + if (ret < 0) + goto e_clk_off; + + return 0; + +e_clk_off: + clk_disable_unprepare(host->clk); +e_free_mmc: + mmc_free_host(mmc); + + return ret; +} + +static int usdhi6_remove(struct platform_device *pdev) +{ + struct usdhi6_host *host = platform_get_drvdata(pdev); + + mmc_remove_host(host->mmc); + + usdhi6_mask_all(host); + cancel_delayed_work_sync(&host->timeout_work); + usdhi6_dma_release(host); + clk_disable_unprepare(host->clk); + mmc_free_host(host->mmc); + + return 0; +} + +static struct platform_driver usdhi6_driver = { + .probe = usdhi6_probe, + .remove = usdhi6_remove, + .driver = { + .name = "usdhi6rol0", + .owner = THIS_MODULE, + .of_match_table = usdhi6_of_match, + }, +}; + +module_platform_driver(usdhi6_driver); + +MODULE_DESCRIPTION("Renesas usdhi6rol0 SD/SDIO host driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:usdhi6rol0"); +MODULE_AUTHOR("Guennadi Liakhovetski "); -- cgit v1.2.3