From 867c1859590f3bbc13d9cfb46c90c8202769d0e5 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Fri, 14 Feb 2020 21:44:08 +0200 Subject: dt-bindings: net: mdio: remove compatible string from example Remove vendor specific compatible string from example, otherwise DT YAML schemas validation may trigger warnings specific to TI ti,davinci_mdio and not to the generic MDIO example. For example, the "bus_freq" is required for davinci_mdio, but not required for generic mdio example. As result following warning will be produced: mdio.example.dt.yaml: mdio@5c030000: 'bus_freq' is a required property Signed-off-by: Grygorii Strashko Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/net/mdio.yaml | 1 - 1 file changed, 1 deletion(-) (limited to 'Documentation/devicetree/bindings/net') diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index 5d08d2ffd4eb..50c3397a82bc 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -56,7 +56,6 @@ patternProperties: examples: - | davinci_mdio: mdio@5c030000 { - compatible = "ti,davinci_mdio"; reg = <0x5c030000 0x1000>; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From a40df28c5640f13405f5617aff3e985f7e72cde7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 23 Feb 2020 09:59:53 +0100 Subject: docs: dt: fix several broken doc references MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are several DT doc references that require manual fixes. I found 3 cases fixed on this patch: - directory named "binding/" instead of "bindings/"; - .txt to .yaml renames; - file renames (still on txt format); Signed-off-by: Mauro Carvalho Chehab Reviewed-by: Miquel Raynal Reviewed-by: Jérôme Pouiller Acked-by: Mark Brown Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt | 2 +- Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt | 2 +- Documentation/devicetree/bindings/sound/st,stm32-sai.txt | 2 +- Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt | 2 +- Documentation/devicetree/bindings/spi/st,stm32-spi.yaml | 2 +- MAINTAINERS | 4 ++-- .../Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt | 2 +- 7 files changed, 8 insertions(+), 8 deletions(-) (limited to 'Documentation/devicetree/bindings/net') diff --git a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt index f3893c4d3c6a..d2eada5044b2 100644 --- a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt +++ b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt @@ -27,7 +27,7 @@ Required properties of NAND chips: - reg: shall contain the native Chip Select ids from 0 to max supported by the cadence nand flash controller -See Documentation/devicetree/bindings/mtd/nand.txt for more details on +See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on generic bindings. Example: diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index 48a7f916c5e4..88b57b0ca1f4 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -45,7 +45,7 @@ Optional properties: switch queue - resets: a single phandle and reset identifier pair. See - Documentation/devicetree/binding/reset/reset.txt for details. + Documentation/devicetree/bindings/reset/reset.txt for details. - reset-names: If the "reset" property is specified, this property should have the value "switch" to denote the switch reset line. diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index 944743dd9212..c42b91e525fa 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -36,7 +36,7 @@ SAI subnodes required properties: - clock-names: Must contain "sai_ck". Must also contain "MCLK", if SAI shares a master clock, with a SAI set as MCLK clock provider. - - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt + - dmas: see Documentation/devicetree/bindings/dma/st,stm32-dma.yaml - dma-names: identifier string for each DMA request line "tx": if sai sub-block is configured as playback DAI "rx": if sai sub-block is configured as capture DAI diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt index 33826f2459fa..ca9101777c44 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt @@ -10,7 +10,7 @@ Required properties: - clock-names: must contain "kclk" - interrupts: cpu DAI interrupt line - dmas: DMA specifiers for audio data DMA and iec control flow DMA - See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt + See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml - dma-names: two dmas have to be defined, "rx" and "rx-ctrl" Optional properties: diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml index f0d979664f07..e49ecbf715ba 100644 --- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml +++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml @@ -49,7 +49,7 @@ properties: dmas: description: | DMA specifiers for tx and rx dma. DMA fifo mode must be used. See - the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt. + the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml. items: - description: rx DMA channel - description: tx DMA channel diff --git a/MAINTAINERS b/MAINTAINERS index 7eb087d24519..35e9b133c424 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4474,7 +4474,7 @@ L: linux-media@vger.kernel.org T: git git://linuxtv.org/media_tree.git S: Maintained F: drivers/media/platform/sunxi/sun6i-csi/ -F: Documentation/devicetree/bindings/media/sun6i-csi.txt +F: Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml CW1200 WLAN driver M: Solomon Peachy @@ -15922,7 +15922,7 @@ F: drivers/*/stm32-*timer* F: drivers/pwm/pwm-stm32* F: include/linux/*/stm32-*tim* F: Documentation/ABI/testing/*timer-stm32 -F: Documentation/devicetree/bindings/*/stm32-*timer* +F: Documentation/devicetree/bindings/*/*stm32-*timer* F: Documentation/devicetree/bindings/pwm/pwm-stm32* STMMAC ETHERNET DRIVER diff --git a/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt index 26de6762b942..081d58abd5ac 100644 --- a/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt +++ b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt @@ -93,5 +93,5 @@ Some properties are recognized either by SPI and SDIO versions: Must contains 64 hexadecimal digits. Not supported in current version. WFx driver also supports `mac-address` and `local-mac-address` as described in -Documentation/devicetree/binding/net/ethernet.txt +Documentation/devicetree/bindings/net/ethernet.txt -- cgit v1.2.3