From 9ab5fb8ad11ad20e100796ca9b2e43f40de796c3 Mon Sep 17 00:00:00 2001 From: Antoine Ténart Date: Wed, 4 Jun 2014 18:03:43 +0200 Subject: Documentation: bindings: add the Berlin CPU control doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Document the CPU control compatible, needed for the SMP support on Marvell Berlin SoCs. Signed-off-by: Antoine Ténart Signed-off-by: Sebastian Hesselbarth --- Documentation/devicetree/bindings/arm/marvell,berlin.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt index 94013a9a8769..904de5781f44 100644 --- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -24,6 +24,22 @@ SoC and board used. Currently known SoC compatibles are: ... } +* Marvell Berlin CPU control bindings + +CPU control register allows various operations on CPUs, like resetting them +independently. + +Required properties: +- compatible: should be "marvell,berlin-cpu-ctrl" +- reg: address and length of the register set + +Example: + +cpu-ctrl@f7dd0000 { + compatible = "marvell,berlin-cpu-ctrl"; + reg = <0xf7dd0000 0x10000>; +}; + * Marvell Berlin2 chip control binding Marvell Berlin SoCs have a chip control register set providing several -- cgit v1.2.3 From a2418f4f049f43a8a5764807436125d753ca716a Mon Sep 17 00:00:00 2001 From: Antoine Ténart Date: Wed, 4 Jun 2014 18:03:44 +0200 Subject: Documentation: bindings: add the marvell,berlin-smp CPU enable method MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Document the CPU enable method used by Marvell Berlin SoCs. Signed-off-by: Antoine Ténart Signed-off-by: Sebastian Hesselbarth --- .../arm/cpu-enable-method/marvell,berlin-smp | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp new file mode 100644 index 000000000000..cd236b727e2a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp @@ -0,0 +1,41 @@ +======================================================== +Secondary CPU enable-method "marvell,berlin-smp" binding +======================================================== + +This document describes the "marvell,berlin-smp" method for enabling secondary +CPUs. To apply to all CPUs, a single "marvell,berlin-smp" enable method should +be defined in the "cpus" node. + +Enable method name: "marvell,berlin-smp" +Compatible machines: "marvell,berlin2" and "marvell,berlin2q" +Compatible CPUs: "marvell,pj4b" and "arm,cortex-a9" +Related properties: (none) + +Note: +This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and +"marvell,berlin-cpu-ctrl"[1]. + +Example: + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,berlin-smp"; + + cpu@0 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + + cpu@1 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <1>; + }; + }; + +-- +[1] arm/marvell,berlin.txt -- cgit v1.2.3 From 4a45787dec8a15b211110be807b4f4aad2828385 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 23 Jun 2014 13:20:59 -0500 Subject: ARM: dts: add support for AM437x StarterKit Add support for TI's AM437x StarterKit Evaluation Module. Cc: Josh Elliot Signed-off-by: Felipe Balbi Tested-by: Franklin Cooper Jr. Tested-by: Tom Rini Tested-by: Darren Etheridge Signed-off-by: Tony Lindgren --- .../devicetree/bindings/arm/omap/omap.txt | 3 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am437x-sk-evm.dts | 613 +++++++++++++++++++++ 3 files changed, 617 insertions(+) create mode 100644 arch/arm/boot/dts/am437x-sk-evm.dts (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index d22b216f5d23..0edc90305dfe 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -129,6 +129,9 @@ Boards: - AM437x GP EVM compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43" +- AM437x SK EVM: AM437x StarterKit Evaluation Module + compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43" + - DRA742 EVM: Software Development Board for DRA742 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5986ff63b901..63d1e5399629 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -301,6 +301,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ omap4-var-dvk-om44.dtb \ omap4-var-stk-om44.dtb dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \ + am437x-sk-evm.dtb \ am437x-gp-evm.dtb dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ omap5-sbc-t54.dtb \ diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts new file mode 100644 index 000000000000..859ff3d620ee --- /dev/null +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -0,0 +1,613 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* AM437x SK EVM */ + +/dts-v1/; + +#include "am4372.dtsi" +#include +#include +#include +#include + +/ { + model = "TI AM437x SK EVM"; + compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43"; + + aliases { + display0 = &lcd0; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "AM437x-SK-EVM"; + ti,audio-codec = <&tlv320aic3106>; + ti,mcasp-controller = <&mcasp1>; + ti,codec-clock-rate = <24000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT"; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_pins>; + + debounce-delay-ms = <5>; + col-scan-delay-us = <1500>; + + row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */ + &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */ + + col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */ + &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */ + + linux,keymap = < + MATRIX_KEY(0, 0, KEY_DOWN) + MATRIX_KEY(0, 1, KEY_RIGHT) + MATRIX_KEY(1, 0, KEY_LEFT) + MATRIX_KEY(1, 1, KEY_UP) + >; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + led@0 { + label = "am437x-sk:red:heartbeat"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@1 { + label = "am437x-sk:green:mmc1"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */ + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@2 { + label = "am437x-sk:blue:cpu0"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */ + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led@3 { + label = "am437x-sk:blue:usr3"; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */ + default-state = "off"; + }; + }; + + lcd0: display { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <43>; + hsync-len = <4>; + vback-porch = <12>; + vfront-porch = <4>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; +}; + +&am43xx_pinmux { + matrix_keypad_pins: matrix_keypad_pins { + pinctrl-single,pins = < + 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */ + 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */ + 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */ + 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */ + >; + }; + + leds_pins: leds_pins { + pinctrl-single,pins = < + 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */ + 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */ + 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */ + 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */ + >; + }; + + i2c0_pins: i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: i2c1_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + ecap0_pins: backlight_pins { + pinctrl-single,pins = < + 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ + >; + }; + + edt_ft5306_ts_pins: edt_ft5306_ts_pins { + pinctrl-single,pins = < + 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ + + /* Slave 2 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + /* Slave 2 reset value */ + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + dss_pins: dss_pins { + pinctrl-single,pins = < + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */ + 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + + >; + }; + + qspi_pins: qspi_pins { + pinctrl-single,pins = < + 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */ + 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ + 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ + 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ + 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */ + 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ + >; + }; + + mcasp1_pins: mcasp1_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + >; + }; + + lcd_pins: lcd_pins { + pinctrl-single,pins = < + /* GPIO 5_8 to select LCD / HDMI */ + 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + tps@24 { + compatible = "ti,tps65218"; + reg = <0x24>; + interrupt-parent = <&gic>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + compatible = "ti,tps65218-dcdc1"; + /* VDD_CORE limits min of OPP50 and max of OPP100 */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + compatible = "ti,tps65218-dcdc2"; + /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + compatible = "ti,tps65218-dcdc3"; + regulator-name = "vdds_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc4: regulator-dcdc4 { + compatible = "ti,tps65218-dcdc4"; + regulator-name = "v3_3d"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,tps65218-ldo1"; + regulator-name = "v1_8d"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + }; + + at24@50 { + compatible = "at24,24c256"; + pagesize = <64>; + reg = <0x50>; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + edt-ft5306@38 { + status = "okay"; + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5306_ts_pins>; + + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <31 0>; + + wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + + touchscreen-size-x = <480>; + touchscreen-size-y = <272>; + }; + + tlv320aic3106: tlv320aic3106@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + AVDD-supply = <&dcdc4>; + IOVDD-supply = <&dcdc4>; + DRVDD-supply = <&dcdc4>; + DVDD-supply = <&ldo1>; + }; + + lis331dlh@18 { + compatible = "st,lis331dlh"; + reg = <0x18>; + status = "okay"; + + Vdd-supply = <&dcdc4>; + Vdd_IO-supply = <&dcdc4>; + interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + + vmmc-supply = <&dcdc4>; + bus-width = <4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; +}; + +&usb2_phy1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb2_phy2 { + status = "okay"; +}; + +&usb2 { + dr_mode = "host"; + status = "okay"; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_pins>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "mx66l51235l"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpol; + spi-cpha; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first 512KiB + * for a valid file to boot(XIP). + */ + partition@0 { + label = "QSPI.U_BOOT"; + reg = <0x00000000 0x000080000>; + }; + partition@1 { + label = "QSPI.U_BOOT.backup"; + reg = <0x00080000 0x00080000>; + }; + partition@2 { + label = "QSPI.U-BOOT-SPL_OS"; + reg = <0x00100000 0x00010000>; + }; + partition@3 { + label = "QSPI.U_BOOT_ENV"; + reg = <0x00110000 0x00010000>; + }; + partition@4 { + label = "QSPI.U-BOOT-ENV.backup"; + reg = <0x00120000 0x00010000>; + }; + partition@5 { + label = "QSPI.KERNEL"; + reg = <0x00130000 0x0800000>; + }; + partition@6 { + label = "QSPI.FILESYSTEM"; + reg = <0x00930000 0x36D0000>; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <4>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <5>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&elm { + status = "okay"; +}; + +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp1_pins>; + + status = "okay"; + + op-mode = <0>; + tdm-slots = <2>; + serial-dir = < + 0 0 1 2 + >; + + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&dss { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_pins>; + + port { + dpi_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; -- cgit v1.2.3 From ee200119c03c7d43ebaf7ae70985244aedb0586d Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Feb 2014 09:21:39 +0200 Subject: ARM: OMAP2: PRM: add support for OMAP2 specific clock providers This patch adds support for initializing also omap2-prcm and omap2-scrm through DT. Signed-off-by: Tero Kristo --- .../devicetree/bindings/arm/omap/prcm.txt | 65 ++++++++++++++++++++++ arch/arm/mach-omap2/prm_common.c | 2 + 2 files changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/omap/prcm.txt (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt new file mode 100644 index 000000000000..79074dac684a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt @@ -0,0 +1,65 @@ +OMAP PRCM bindings + +Power Reset and Clock Manager lists the device clocks and clockdomains under +a DT hierarchy. Each TI SoC can have multiple PRCM entities listed for it, +each describing one module and the clock hierarchy under it. see [1] for +documentation about the individual clock/clockdomain nodes. + +[1] Documentation/devicetree/bindings/clock/ti/* + +Required properties: +- compatible: Must be one of: + "ti,am3-prcm" + "ti,am3-scrm" + "ti,am4-prcm" + "ti,am4-scrm" + "ti,omap2-prcm" + "ti,omap2-scrm" + "ti,omap3-prm" + "ti,omap3-cm" + "ti,omap3-scrm" + "ti,omap4-cm1" + "ti,omap4-prm" + "ti,omap4-cm2" + "ti,omap4-scrm" + "ti,omap5-prm" + "ti,omap5-cm-core-aon" + "ti,omap5-scrm" + "ti,omap5-cm-core" + "ti,dra7-prm" + "ti,dra7-cm-core-aon" + "ti,dra7-cm-core" +- reg: Contains PRCM module register address range + (base address and length) +- clocks: clocks for this module +- clockdomains: clockdomains for this module + +Example: + +cm: cm@48004000 { + compatible = "ti,omap3-cm"; + reg = <0x48004000 0x4000>; + + cm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_clockdomains: clockdomains { + }; +} + +&cm_clocks { + omap2_32k_fck: omap_32k_fck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; +}; + +&cm_clockdomains { + core_l3_clkdm: core_l3_clkdm { + compatible = "ti,clockdomain"; + clocks = <&sdrc_ick>; + }; +}; diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 25e8b8232115..76ca320f007c 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -472,6 +472,8 @@ static struct of_device_id omap_prcm_dt_match_table[] = { { .compatible = "ti,am3-scrm" }, { .compatible = "ti,am4-prcm" }, { .compatible = "ti,am4-scrm" }, + { .compatible = "ti,omap2-prcm" }, + { .compatible = "ti,omap2-scrm" }, { .compatible = "ti,omap3-prm" }, { .compatible = "ti,omap3-cm" }, { .compatible = "ti,omap3-scrm" }, -- cgit v1.2.3 From ed0a3ff435b4aa3b69340030a11834b1a16fa214 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 1 Jul 2014 15:44:01 +0200 Subject: Documentation: dt: document all the atmel pmc compatibles Documentation for atmel-pmc only list one compatible, add the remaining compatible strings. Signed-off-by: Alexandre Belloni --- Documentation/devicetree/bindings/arm/atmel-pmc.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt index 389bed5056e8..795cc78543fe 100644 --- a/Documentation/devicetree/bindings/arm/atmel-pmc.txt +++ b/Documentation/devicetree/bindings/arm/atmel-pmc.txt @@ -1,7 +1,10 @@ * Power Management Controller (PMC) Required properties: -- compatible: Should be "atmel,at91rm9200-pmc" +- compatible: Should be "atmel,-pmc". + can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12, + at91sam9x5, sama5d3 + - reg: Should contain PMC registers location and length Examples: -- cgit v1.2.3 From d7f3ec2b69f692d215deb991d109a3341b0d8da9 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 9 Jul 2014 15:40:14 +0200 Subject: ARM: mvebu: add CA9 MPcore SoC Controller node The CA9 MPcore SoC Control block is a set of registers that allows to configure certain internal aspects of the core blocks of the SoC (Cortex-A9, L2 cache controller, etc.). In most cases, the default values are fine so they aren't many reasons to touch those registers, but there is one exception: to support cpuidle on Armada 38x, we need to modify the value of the CA9 MPcore Reset Control register. Therefore, this commit adds a new Device Tree binding for this hardware block, and uses this new binding for the Armada 38x Device Tree file. Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni Cc: devicetree@vger.kernel.org Link: https://lkml.kernel.org/r/1404913221-17343-11-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper --- .../devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt | 14 ++++++++++++++ arch/arm/boot/dts/armada-38x.dtsi | 5 +++++ 2 files changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt new file mode 100644 index 000000000000..8781073029e9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt @@ -0,0 +1,14 @@ +Marvell Armada 38x CA9 MPcore SoC Controller +============================================ + +Required properties: + +- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl". + +- reg: should be the register base and length as documented in the + datasheet for the CA9 MPcore SoC Control registers + +mpcore-soc-ctrl@20d20 { + compatible = "marvell,armada-380-mpcore-soc-ctrl"; + reg = <0x20d20 0x6c>; +}; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 3de364e81b52..b479eaa23fcc 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -286,6 +286,11 @@ reg = <0x20800 0x10>; }; + mpcore-soc-ctrl@20d20 { + compatible = "marvell,armada-380-mpcore-soc-ctrl"; + reg = <0x20d20 0x6c>; + }; + coherency-fabric@21010 { compatible = "marvell,armada-380-coherency-fabric"; reg = <0x21010 0x1c>; -- cgit v1.2.3 From 6d0a067ff0f879a3a569c00219af25ba643727cb Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Tue, 10 Jun 2014 00:52:46 +0200 Subject: ARM: tegra: initial support for apalis t30 This patch adds the device tree to support Toradex Apalis T30, a computer on module which can be used on different carrier boards. The module consists of a Tegra 3 SoC, two PMICs, 1 or 2 GB of DDR3L RAM, eMMC, an LM95245 temperature sensor chip, an i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller as well as two MCP2515 CAN controllers. Furthermore, there is an SGTL5000 audio codec which is not yet supported. Anything that is not self contained on the module is disabled by default. The device tree for the Evaluation Board includes the modules device tree and enables the supported peripherals of the carrier board (the Evaluation Board supports almost all of them). While at it also add the device tree binding documentation for Apalis T30. Signed-off-by: Marcel Ziswiler [swarren: fixed some node sort orders] Signed-off-by: Stephen Warren --- Documentation/devicetree/bindings/arm/tegra.txt | 2 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra30-apalis-eval.dts | 260 +++++++++ arch/arm/boot/dts/tegra30-apalis.dtsi | 673 ++++++++++++++++++++++++ 4 files changed, 936 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-apalis-eval.dts create mode 100644 arch/arm/boot/dts/tegra30-apalis.dtsi (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt index 558ed4b4ef39..73278c6d2dc3 100644 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ b/Documentation/devicetree/bindings/arm/tegra.txt @@ -30,6 +30,8 @@ board-specific compatible values: nvidia,seaboard nvidia,ventana nvidia,whistler + toradex,apalis_t30 + toradex,apalis_t30-eval toradex,colibri_t20-512 toradex,iris diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5986ff63b901..906fb672df44 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -390,6 +390,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-trimslice.dtb \ tegra20-ventana.dtb \ tegra20-whistler.dtb \ + tegra30-apalis-eval.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts new file mode 100644 index 000000000000..992143372af0 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -0,0 +1,260 @@ +/dts-v1/; + +#include +#include "tegra30-apalis.dtsi" + +/ { + model = "Toradex Apalis T30 on Apalis Evaluation Board"; + compatible = "toradex,apalis_t30-eval", "nvidia,tegra30"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/tps65911@2d"; + rtc2 = "/rtc@7000e000"; + }; + + pcie-controller@00003000 { + status = "okay"; + + pci@1,0 { + status = "okay"; + }; + + pci@2,0 { + status = "okay"; + }; + + pci@3,0 { + status = "okay"; + }; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + hdmi@54280000 { + status = "okay"; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + pcie-switch@58 { + compatible = "plx,pex8605"; + reg = <0x58>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; + }; + + /* GEN2_I2C: unused */ + + /* + * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on + * carrier board) + */ + cami2c: i2c@7000c500 { + status = "okay"; + clock-frequency = <400000>; + }; + + /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */ + hdmiddc: i2c@7000c700 { + status = "okay"; + }; + + /* SPI1: Apalis SPI1 */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + spidev0: spidev@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <25000000>; + }; + }; + + /* SPI5: Apalis SPI2 */ + spi@7000dc00 { + status = "okay"; + spi-max-frequency = <25000000>; + spidev1: spidev@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <25000000>; + }; + }; + + sd1: sdhci@78000000 { + status = "okay"; + bus-width = <4>; + /* SD1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>; + no-1-8-v; + }; + + mmc1: sdhci@78000400 { + status = "okay"; + bus-width = <8>; + /* MMC1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; + no-1-8-v; + }; + + /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + vbus-supply = <&usbo1_vbus_reg>; + }; + + /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ + usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + vbus-supply = <&usbh_vbus_reg>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <&usbh_vbus_reg>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + /* PWM0 */ + pwms = <&pwm 0 5000000>; + brightness-levels = <255 231 223 207 191 159 127 0>; + default-brightness-level = <6>; + /* BKL1_ON */ + enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu", "simple-panel"; + + backlight = <&backlight>; + }; + + pwmleds { + compatible = "pwm-leds"; + + pwm1 { + label = "PWM1"; + pwms = <&pwm 3 19600>; + max-brightness = <255>; + }; + + pwm2 { + label = "PWM2"; + pwms = <&pwm 2 19600>; + max-brightness = <255>; + }; + + pwm3 { + label = "PWM3"; + pwms = <&pwm 1 19600>; + max-brightness = <255>; + }; + }; + + regulators { + sys_5v0_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + /* USBO1_EN */ + usbo1_vbus_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usbo1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&sys_5v0_reg>; + }; + + /* USBH_EN */ + usbh_vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usbh_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&sys_5v0_reg>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi new file mode 100644 index 000000000000..d04efcf8e3cf --- /dev/null +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -0,0 +1,673 @@ +#include "tegra30.dtsi" + +/* + * Toradex Apalis T30 Device Tree + * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C + */ +/ { + model = "Toradex Apalis T30"; + compatible = "toradex,apalis_t30", "nvidia,tegra30"; + + pcie-controller@00003000 { + pex-clk-supply = <&sys_3v3_reg>; + vdd-supply = <&vdd2_reg>; + avdd-supply = <&ldo6_reg>; + + pci@1,0 { + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + nvidia,num-lanes = <1>; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + vdd-supply = <&sys_3v3_reg>; + pll-supply = <&vio_reg>; + + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmiddc>; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Apalis BKL1_ON */ + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis BKL1_PWM */ + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "pwm0"; + nvidia,pull = ; + nvidia,tristate = ; + }; + /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */ + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis CAN1 on SPI6 */ + spi2_cs0_n_px3 { + nvidia,pins = "spi2_cs0_n_px3", + "spi2_miso_px1", + "spi2_mosi_px0", + "spi2_sck_px2"; + nvidia,function = "spi6"; + nvidia,pull = ; + nvidia,tristate = ; + }; + /* CAN_INT1 */ + spi2_cs1_n_pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Apalis CAN2 on SPI4 */ + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + }; + /* CAN_INT2 */ + spi2_cs2_n_pw3 { + nvidia,pins = "spi2_cs2_n_pw3"; + nvidia,function = "spi3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Apalis I2C3 */ + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + nvidia,open-drain = ; + }; + + /* Apalis MMC1 */ + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6", + "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_dat4_pd1", + "sdmmc3_dat5_pd0", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + }; + /* Apalis MMC1_CD# */ + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Apalis PWM1 */ + gpio_pu6 { + nvidia,pins = "gpio_pu6"; + nvidia,function = "pwm3"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis PWM2 */ + gpio_pu5 { + nvidia,pins = "gpio_pu5"; + nvidia,function = "pwm2"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis PWM3 */ + gpio_pu4 { + nvidia,pins = "gpio_pu4"; + nvidia,function = "pwm1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis PWM4 */ + gpio_pu3 { + nvidia,pins = "gpio_pu3"; + nvidia,function = "pwm0"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis RESET_MOCI# */ + gmi_rst_n_pi4 { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis SD1 */ + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + /* Apalis SD1_CD# */ + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Apalis SPI1 */ + spi1_sck_px5 { + nvidia,pins = "spi1_sck_px5", + "spi1_mosi_px4", + "spi1_miso_px7", + "spi1_cs0_n_px6"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis SPI2 */ + lcd_sck_pz4 { + nvidia,pins = "lcd_sck_pz4", + "lcd_sdout_pn5", + "lcd_sdin_pz2", + "lcd_cs0_n_pn4"; + nvidia,function = "spi5"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis UART1 */ + ulpi_data0 { + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis UART2 */ + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis UART3 */ + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis UART4 */ + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis USBO1_EN */ + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "rsvd4"; + nvidia,open-drain = ; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis USBO1_OC# */ + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "rsvd4"; + nvidia,open-drain = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Apalis WAKE1_MICO */ + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* eMMC (On-module) */ + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* LVDS Transceiver Configuration */ + pbb0 { + nvidia,pins = "pbb0", + "pbb7", + "pcc1", + "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + }; + pbb3 { + nvidia,pins = "pbb3", + "pbb4", + "pbb5", + "pbb6"; + nvidia,function = "displayb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + }; + + /* Power I2C (On-module) */ + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + nvidia,open-drain = ; + }; + + /* + * THERMD_ALERT#, unlatched I2C address pin of LM95245 + * temperature sensor therefore requires disabling for + * now + */ + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* TOUCH_PEN_INT# */ + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + }; + }; + + hdmiddc: i2c@7000c700 { + clock-frequency = <100000>; + }; + + /* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&sys_3v3_reg>; + vcc2-supply = <&sys_3v3_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&sys_3v3_reg>; + vcc5-supply = <&sys_3v3_reg>; + vcc6-supply = <&vio_reg>; + vcc7-supply = <&sys_5v0_reg>; + vccio-supply = <&sys_3v3_reg>; + + regulators { + /* SW1: +V1.35_VDDIO_DDR */ + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + /* SW2: +V1.05 */ + vdd2_reg: vdd2 { + regulator-name = + "vdd_pexa,vdd_pexb,vdd_sata"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* SW CTRL: +V1.0_VDD_CPU */ + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + /* SWIO: +V1.8 */ + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* LDO1: unused */ + + /* + * EN_+V3.3 switching via FET: + * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN + * see also v3_3 fixed supply + */ + ldo2_reg: ldo2 { + regulator-name = "en_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* +V1.2_CSI */ + ldo3_reg: ldo3 { + regulator-name = + "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* +V1.2_VDD_RTC */ + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* + * +V2.8_AVDD_VDAC: + * only required for analog RGB + */ + ldo5_reg: ldo5 { + regulator-name = "avdd_vdac"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + /* + * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V + * but LDO6 can't set voltage in 50mV + * granularity + */ + ldo6_reg: ldo6 { + regulator-name = "avdd_plle"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + /* +V1.2_AVDD_PLL */ + ldo7_reg: ldo7 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* +V1.0_VDD_DDR_HS */ + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = ; + interrupt-parent = <&gpio>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + + /* + * LM95245 temperature sensor + * Note: OVERT_N directly connected to PMIC PWRDN + */ + temp-sensor@4c { + compatible = "national,lm95245"; + reg = <0x4c>; + }; + + /* SW: +V1.2_VDD_CORE */ + tps62362@60 { + compatible = "ti,tps62362"; + reg = <0x60>; + + regulator-name = "tps62362-vout"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-low; + /* VSEL1: EN_CORE_DVFS_N low for DVFS */ + ti,vsel1-state-low; + }; + }; + + /* SPI4: CAN2 */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <10000000>; + + can@1 { + compatible = "microchip,mcp2515"; + reg = <1>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = ; + spi-max-frequency = <10000000>; + }; + }; + + /* SPI6: CAN1 */ + spi@7000de00 { + status = "okay"; + spi-max-frequency = <10000000>; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = ; + spi-max-frequency = <10000000>; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clk@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + clk16m: clk@1 { + compatible = "fixed-clock"; + reg=<1>; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sys_3v3_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; -- cgit v1.2.3 From 5bc20d79409a2d20cf9018e0562c8821a9f8ea7e Mon Sep 17 00:00:00 2001 From: Andreas Färber Date: Fri, 25 Jul 2014 01:00:11 +0200 Subject: Documentation: devicetree: Adapteva boards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We're about to add a device tree for the Parallella board. Cc: Andreas Olofsson Signed-off-by: Andreas Färber Signed-off-by: Michal Simek --- Documentation/devicetree/bindings/arm/adapteva.txt | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/adapteva.txt (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/adapteva.txt b/Documentation/devicetree/bindings/arm/adapteva.txt new file mode 100644 index 000000000000..1d8af9e36065 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/adapteva.txt @@ -0,0 +1,7 @@ +Adapteva Platforms Device Tree Bindings +--------------------------------------- + +Parallella board + +Required root node properties: + - compatible = "adapteva,parallella"; -- cgit v1.2.3 From 198946b1beda18963aa905730b6c4bcb9f71dab4 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 8 Jul 2014 22:20:57 +0200 Subject: dt-bindings: arm: add cortex-a12 and cortex-a17 cpu compatible properties As announced parts from ARM they will probably be used in socs shortly. Signed-off-by: Heiko Stuebner Acked-by: Mark Rutland Acked-by: Arnd Bergmann --- Documentation/devicetree/bindings/arm/cpus.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 1fe72a0778cd..bc6dc176c9fa 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -152,7 +152,9 @@ nodes to be present and contain the properties described below. "arm,cortex-a7" "arm,cortex-a8" "arm,cortex-a9" + "arm,cortex-a12" "arm,cortex-a15" + "arm,cortex-a17" "arm,cortex-a53" "arm,cortex-a57" "arm,cortex-m0" -- cgit v1.2.3 From be37a8b5a371850c6367bc984ee61d9de3eacf6a Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 30 Jun 2014 17:09:45 -0500 Subject: devicetree: bindings: document Broadcom CPU enable method Broadcom mobile SoCs use a ROM-implemented holding pen for controlled boot of secondary cores. A special register is used to communicate to the ROM that a secondary core should start executing kernel code. This enable method is currently used for members of the bcm281xx and bcm21664 SoC families. The use of an enable method also allows the SMP operation vector to be assigned as a result of device tree content for these SoCs. Signed-off-by: Alex Elder Signed-off-by: Matt Porter --- .../bindings/arm/bcm/brcm,bcm11351-cpu-method | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method new file mode 100644 index 000000000000..8240c023e202 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method @@ -0,0 +1,36 @@ +Broadcom Kona Family CPU Enable Method +-------------------------------------- +This binding defines the enable method used for starting secondary +CPUs in the following Broadcom SoCs: + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664 + +The enable method is specified by defining the following required +properties in the "cpus" device tree node: + - enable-method = "brcm,bcm11351-cpu-method"; + - secondary-boot-reg = <...>; + +The secondary-boot-reg property is a u32 value that specifies the +physical address of the register used to request the ROM holding pen +code release a secondary CPU. The value written to the register is +formed by encoding the target CPU id into the low bits of the +physical start address it should jump to. + +Example: + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm11351-cpu-method"; + secondary-boot-reg = <0x3500417c>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; -- cgit v1.2.3 From 0a540d4ba6af544121ca04cbb8ee14212a6e645a Mon Sep 17 00:00:00 2001 From: Marc Carino Date: Fri, 6 Sep 2013 13:40:19 -0700 Subject: ARM: brcmstb: add CPU binding for Broadcom Brahma15 Add the Broadcom Brahma B15 CPU to the DT CPU binding list. Signed-off-by: Marc Carino Acked-by: Arnd Bergmann Signed-off-by: Brian Norris Signed-off-by: Matt Porter --- Documentation/devicetree/bindings/arm/cpus.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 1fe72a0778cd..06fd7bba830c 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -163,6 +163,7 @@ nodes to be present and contain the properties described below. "arm,cortex-r4" "arm,cortex-r5" "arm,cortex-r7" + "brcm,brahma-b15" "faraday,fa526" "intel,sa110" "intel,sa1100" @@ -184,6 +185,7 @@ nodes to be present and contain the properties described below. can be one of: "allwinner,sun6i-a31" "arm,psci" + "brcm,brahma-b15" "marvell,armada-375-smp" "marvell,armada-380-smp" "marvell,armada-xp-smp" -- cgit v1.2.3 From c5cc8bb5bd7089193e22df32b63332502a63676a Mon Sep 17 00:00:00 2001 From: Marc Carino Date: Fri, 6 Sep 2013 13:41:35 -0700 Subject: ARM: brcmstb: add misc. DT bindings for brcmstb Document the bindings that the Broadcom STB platform needs for proper bootup. Signed-off-by: Marc Carino Acked-by: Florian Fainelli Acked-by: Arnd Bergmann Signed-off-by: Brian Norris Signed-off-by: Matt Porter --- .../devicetree/bindings/arm/brcm-brcmstb.txt | 95 ++++++++++++++++++++++ 1 file changed, 95 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt new file mode 100644 index 000000000000..3c436cc4f35d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt @@ -0,0 +1,95 @@ +ARM Broadcom STB platforms Device Tree Bindings +----------------------------------------------- +Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants) +SoC shall have the following DT organization: + +Required root node properties: + - compatible: "brcm,bcm", "brcm,brcmstb" + +example: +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Broadcom STB (bcm7445)"; + compatible = "brcm,bcm7445", "brcm,brcmstb"; + +Further, syscon nodes that map platform-specific registers used for general +system control is required: + + - compatible: "brcm,bcm-sun-top-ctrl", "syscon" + - compatible: "brcm,bcm-hif-cpubiuctrl", "syscon" + - compatible: "brcm,bcm-hif-continuation", "syscon" + +example: + rdb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x00 0xf0000000 0x1000000>; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7445-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + }; + + hif_cpubiuctrl: syscon@3e2400 { + compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon"; + reg = <0x3e2400 0x5b4>; + }; + + hif_continuation: syscon@452000 { + compatible = "brcm,bcm7445-hif-continuation", "syscon"; + reg = <0x452000 0x100>; + }; + }; + +Lastly, nodes that allow for support of SMP initialization and reboot are +required: + +smpboot +------- +Required properties: + + - compatible + The string "brcm,brcmstb-smpboot". + + - syscon-cpu + A phandle / integer array property which lets the BSP know the location + of certain CPU power-on registers. + + The layout of the property is as follows: + o a phandle to the "hif_cpubiuctrl" syscon node + o offset to the base CPU power zone register + o offset to the base CPU reset register + + - syscon-cont + A phandle pointing to the syscon node which describes the CPU boot + continuation registers. + o a phandle to the "hif_continuation" syscon node + +example: + smpboot { + compatible = "brcm,brcmstb-smpboot"; + syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; + syscon-cont = <&hif_continuation>; + }; + +reboot +------- +Required properties + + - compatible + The string property "brcm,brcmstb-reboot". + + - syscon + A phandle / integer array that points to the syscon node which describes + the general system reset registers. + o a phandle to "sun_top_ctrl" + o offset to the "reset source enable" register + o offset to the "software master reset" register + +example: + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; -- cgit v1.2.3 From f80b71397d09d72222df6c6c2bf39a8a93351b37 Mon Sep 17 00:00:00 2001 From: Marc Carino Date: Fri, 6 Sep 2013 13:44:19 -0700 Subject: ARM: brcmstb: gic: add compatible string for Broadcom Brahma15 Document the Broadcom Brahma B15 GIC implementation as compatible with the ARM GIC standard. Signed-off-by: Marc Carino Acked-by: Florian Fainelli Acked-by: Arnd Bergmann Signed-off-by: Brian Norris Signed-off-by: Matt Porter --- Documentation/devicetree/bindings/arm/gic.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index 5573c08d3180..c7d2fa156678 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -16,6 +16,7 @@ Main node required properties: "arm,cortex-a9-gic" "arm,cortex-a7-gic" "arm,arm11mp-gic" + "brcm,brahma-b15-gic" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. The type shall be a and the value shall be 3. -- cgit v1.2.3 From c0314e8a4ead9d19d8c68a5b8f7da0194798dc6d Mon Sep 17 00:00:00 2001 From: Andreas Faerber Date: Tue, 29 Jul 2014 06:09:51 +0900 Subject: ARM: dts: Document exynos5410 PMU We will start using "samsung,exynos5410-pmu". Signed-off-by: Andreas Faerber Signed-off-by: Kukjin Kim --- Documentation/devicetree/bindings/arm/samsung/pmu.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index 2a4ab046a8a1..fe14d8118093 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -7,6 +7,7 @@ Properties: - "samsung,exynos4212-pmu" - for Exynos4212 SoC, - "samsung,exynos4412-pmu" - for Exynos4412 SoC, - "samsung,exynos5250-pmu" - for Exynos5250 SoC, + - "samsung,exynos5410-pmu" - for Exynos5410 SoC, - "samsung,exynos5420-pmu" - for Exynos5420 SoC. second value must be always "syscon". -- cgit v1.2.3 From fbe4e9f55b276f515f15e869ce039fe78fc43c6c Mon Sep 17 00:00:00 2001 From: Vikas Sajjan Date: Tue, 29 Jul 2014 06:17:39 +0900 Subject: ARM: dts: Add PMU DT node for exynos5260 SoC Adds PMU DT node for exynos5260 SoC. Signed-off-by: Vikas Sajjan Signed-off-by: Kukjin Kim --- Documentation/devicetree/bindings/arm/samsung/pmu.txt | 1 + arch/arm/boot/dts/exynos5260.dtsi | 5 +++++ 2 files changed, 6 insertions(+) (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index fe14d8118093..e0e955e7af8c 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -7,6 +7,7 @@ Properties: - "samsung,exynos4212-pmu" - for Exynos4212 SoC, - "samsung,exynos4412-pmu" - for Exynos4412 SoC, - "samsung,exynos5250-pmu" - for Exynos5250 SoC, + - "samsung,exynos5260-pmu" - for Exynos5260 SoC. - "samsung,exynos5410-pmu" - for Exynos5410 SoC, - "samsung,exynos5420-pmu" - for Exynos5420 SoC. second value must be always "syscon". diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 5398a60207ca..4f2fabeecb0e 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -227,6 +227,11 @@ interrupts = <0 243 0>; }; + pmu_system_controller: system-controller@10D50000 { + compatible = "samsung,exynos5260-pmu", "syscon"; + reg = <0x10D50000 0x10000>; + }; + uart0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; -- cgit v1.2.3 From 6a3246c02e7bcb16a58f3fcee4662a9b36ea80e9 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 25 Jul 2014 09:01:02 +0200 Subject: ARM: zynq: DT: Clarify Xilinx Zynq platform ep107 was emulation platform and compatible string have been changed long time ago. "ARM: zynq: dts: split up device tree" (sha1: e06f1a9ed7ebff170ba05d2606d079fb36c6a52d) Signed-off-by: Michal Simek --- Documentation/devicetree/bindings/arm/xilinx.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree/bindings/arm') diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 6f1ed830b4f7..1f7995357888 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -1,7 +1,7 @@ -Xilinx Zynq EP107 Emulation Platform board +Xilinx Zynq Platforms Device Tree Bindings -This board is an emulation platform for the Zynq product which is -based on an ARM Cortex A9 processor. +Boards with Zynq-7000 SOC based on an ARM Cortex A9 processor +shall have the following properties. Required root node properties: - - compatible = "xlnx,zynq-ep107"; + - compatible = "xlnx,zynq-7000"; -- cgit v1.2.3