From f957bcf0164e45bd77867e02412035e1c2fd7058 Mon Sep 17 00:00:00 2001 From: Tobias Klauser <tklauser@distanz.ch> Date: Thu, 4 Jun 2009 23:07:59 +0000 Subject: s2io: Remove private boolean definitions Remove the private definition of TRUE/FALSE and use the ones from linux/stddef.h. Also remove the definition of BOOL which is not referenced inside the driver anyway. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net> --- drivers/net/s2io.c | 22 +++++++++++----------- drivers/net/s2io.h | 9 --------- 2 files changed, 11 insertions(+), 20 deletions(-) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 2bc73ede4312..458daa06ed41 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1764,7 +1764,7 @@ static int init_nic(struct s2io_nic *nic) * by then we return error. */ time = 0; - while (TRUE) { + while (true) { val64 = readq(&bar0->rti_command_mem); if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) break; @@ -2137,7 +2137,7 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag) herc = (sp->device_type == XFRAME_II_DEVICE); - if (flag == FALSE) { + if (flag == false) { if ((!herc && (sp->pdev->revision >= 4)) || herc) { if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE)) ret = 1; @@ -3587,7 +3587,7 @@ static void s2io_reset(struct s2io_nic * sp) writeq(val64, &bar0->pcc_err_reg); } - sp->device_enabled_once = FALSE; + sp->device_enabled_once = false; } /** @@ -5572,10 +5572,10 @@ static void s2io_ethtool_getpause_data(struct net_device *dev, val64 = readq(&bar0->rmac_pause_cfg); if (val64 & RMAC_PAUSE_GEN_ENABLE) - ep->tx_pause = TRUE; + ep->tx_pause = true; if (val64 & RMAC_PAUSE_RX_ENABLE) - ep->rx_pause = TRUE; - ep->autoneg = FALSE; + ep->rx_pause = true; + ep->autoneg = false; } /** @@ -6806,7 +6806,7 @@ static void s2io_set_link(struct work_struct *work) val64 |= ADAPTER_LED_ON; writeq(val64, &bar0->adapter_control); } - nic->device_enabled_once = TRUE; + nic->device_enabled_once = true; } else { DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name); DBG_PRINT(ERR_DBG, "device is not Quiescent\n"); @@ -7754,7 +7754,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) struct s2io_nic *sp; struct net_device *dev; int i, j, ret; - int dma_flag = FALSE; + int dma_flag = false; u32 mac_up, mac_down; u64 val64 = 0, tmp64 = 0; struct XENA_dev_config __iomem *bar0 = NULL; @@ -7777,7 +7777,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n"); - dma_flag = TRUE; + dma_flag = true; if (pci_set_consistent_dma_mask (pdev, DMA_BIT_MASK(64))) { DBG_PRINT(ERR_DBG, @@ -7818,7 +7818,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) sp->dev = dev; sp->pdev = pdev; sp->high_dma_flag = dma_flag; - sp->device_enabled_once = FALSE; + sp->device_enabled_once = false; if (rx_ring_mode == 1) sp->rxd_mode = RXD_MODE_1; if (rx_ring_mode == 2) @@ -7964,7 +7964,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; - if (sp->high_dma_flag == TRUE) + if (sp->high_dma_flag == true) dev->features |= NETIF_F_HIGHDMA; dev->features |= NETIF_F_TSO; dev->features |= NETIF_F_TSO6; diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 55cb943f23f8..d5c5be6c07b9 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -18,15 +18,6 @@ #define vBIT(val, loc, sz) (((u64)val) << (64-loc-sz)) #define INV(d) ((d&0xff)<<24) | (((d>>8)&0xff)<<16) | (((d>>16)&0xff)<<8)| ((d>>24)&0xff) -#ifndef BOOL -#define BOOL int -#endif - -#ifndef TRUE -#define TRUE 1 -#define FALSE 0 -#endif - #undef SUCCESS #define SUCCESS 0 #define FAILURE -1 -- cgit v1.2.3